WorldWideScience

Sample records for model users guide

  1. FORSPAN Model Users Guide

    Science.gov (United States)

    Klett, T.R.; Charpentier, Ronald R.

    2003-01-01

    The USGS FORSPAN model is designed for the assessment of continuous accumulations of crude oil, natural gas, and natural gas liquids (collectively called petroleum). Continuous (also called ?unconventional?) accumulations have large spatial dimensions and lack well defined down-dip petroleum/water contacts. Oil and natural gas therefore are not localized by buoyancy in water in these accumulations. Continuous accumulations include ?tight gas reservoirs,? coalbed gas, oil and gas in shale, oil and gas in chalk, and shallow biogenic gas. The FORSPAN model treats a continuous accumulation as a collection of petroleumcontaining cells for assessment purposes. Each cell is capable of producing oil or gas, but the cells may vary significantly from one another in their production (and thus economic) characteristics. The potential additions to reserves from continuous petroleum resources are calculated by statistically combining probability distributions of the estimated number of untested cells having the potential for additions to reserves with the estimated volume of oil and natural gas that each of the untested cells may potentially produce (total recovery). One such statistical method for combination of number of cells with total recovery, used by the USGS, is called ACCESS.

  2. NORTRIP emission model user guide

    Energy Technology Data Exchange (ETDEWEB)

    Denby, Rolstad Bruce

    2012-07-01

    The NORTRIP emission model has been developed at NILU, in conjunction with other Nordic institutes, to model non-exhaust traffic induced emissions. This short summary document explains how to run the NORTRIP model from the MATLAB environment or by using the executable user interface version. It also provides brief information on input files and the model architecture.(Author)

  3. GEOS-5 Chemistry Transport Model User's Guide

    Science.gov (United States)

    Kouatchou, J.; Molod, A.; Nielsen, J. E.; Auer, B.; Putman, W.; Clune, T.

    2015-01-01

    The Goddard Earth Observing System version 5 (GEOS-5) General Circulation Model (GCM) makes use of the Earth System Modeling Framework (ESMF) to enable model configurations with many functions. One of the options of the GEOS-5 GCM is the GEOS-5 Chemistry Transport Model (GEOS-5 CTM), which is an offline simulation of chemistry and constituent transport driven by a specified meteorology and other model output fields. This document describes the basic components of the GEOS-5 CTM, and is a user's guide on to how to obtain and run simulations on the NCCS Discover platform. In addition, we provide information on how to change the model configuration input files to meet users' needs.

  4. Revised user's guide to the 'DISPOSALS' model

    International Nuclear Information System (INIS)

    Laundy, R.S.; James, A.R.; Groom, M.S.; LeJeune, S.R.

    1985-04-01

    This report provides a User's Guide to the 'DISPOSALS' computer model and includes instructions on how to set up and run a specific problem together with details of the scope, theoretical basis, data requirements and capabilities of the model. The function of the 'DISPOSALS' model is to make assignments of nuclear waste material in an optimum manner to a number of disposal sites each subject to a number of constraints such as limits on the volume and activity. The user is able to vary the number of disposal sites, the range and limits of the constraints to be applied to each disposal site and the objective function for optimisation. The model is based on the Linear Programming technique and uses CAP Scientific's LAMPS and MAGIC packages. Currently the model has been implemented on CAP Scientific's VAX 11/750 minicomputer. (author)

  5. User's guide to the 'DISPOSALS' model

    International Nuclear Information System (INIS)

    Groom, M.S.; James, A.R.; Laundy, R.S.

    1984-03-01

    This report provides a User's Guide to the 'DISPOSALS' computer model and includes instructions on how to set up and run a specific problem together with details of the scope, theoretical basis, data requirements and capabilities of the model. The function of the 'DISPOSALS' model is to make assignments of nuclear waste material in an optimum manner to a number of disposal sites each subject to a number of constraints such as limits on the volume and activity. The user is able to vary the number of disposal sites, the range and limits of the constraints to be applied to each disposal site and the objective function for optimisation. The model is based on the Linear Programming technique and uses CAP Scientific's LAMPS and MAGIC packages. Currently the model has been implemented on CAP Scientific's VAX 11/750 minicomputer. (author)

  6. Wake Vortex Inverse Model User's Guide

    Science.gov (United States)

    Lai, David; Delisi, Donald

    2008-01-01

    NorthWest Research Associates (NWRA) has developed an inverse model for inverting landing aircraft vortex data. The data used for the inversion are the time evolution of the lateral transport position and vertical position of both the port and starboard vortices. The inverse model performs iterative forward model runs using various estimates of vortex parameters, vertical crosswind profiles, and vortex circulation as a function of wake age. Forward model predictions of lateral transport and altitude are then compared with the observed data. Differences between the data and model predictions guide the choice of vortex parameter values, crosswind profile and circulation evolution in the next iteration. Iterations are performed until a user-defined criterion is satisfied. Currently, the inverse model is set to stop when the improvement in the rms deviation between the data and model predictions is less than 1 percent for two consecutive iterations. The forward model used in this inverse model is a modified version of the Shear-APA model. A detailed description of this forward model, the inverse model, and its validation are presented in a different report (Lai, Mellman, Robins, and Delisi, 2007). This document is a User's Guide for the Wake Vortex Inverse Model. Section 2 presents an overview of the inverse model program. Execution of the inverse model is described in Section 3. When executing the inverse model, a user is requested to provide the name of an input file which contains the inverse model parameters, the various datasets, and directories needed for the inversion. A detailed description of the list of parameters in the inversion input file is presented in Section 4. A user has an option to save the inversion results of each lidar track in a mat-file (a condensed data file in Matlab format). These saved mat-files can be used for post-inversion analysis. A description of the contents of the saved files is given in Section 5. An example of an inversion input

  7. Parallel community climate model: Description and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Drake, J.B.; Flanery, R.E.; Semeraro, B.D.; Worley, P.H. [and others

    1996-07-15

    This report gives an overview of a parallel version of the NCAR Community Climate Model, CCM2, implemented for MIMD massively parallel computers using a message-passing programming paradigm. The parallel implementation was developed on an Intel iPSC/860 with 128 processors and on the Intel Delta with 512 processors, and the initial target platform for the production version of the code is the Intel Paragon with 2048 processors. Because the implementation uses a standard, portable message-passing libraries, the code has been easily ported to other multiprocessors supporting a message-passing programming paradigm. The parallelization strategy used is to decompose the problem domain into geographical patches and assign each processor the computation associated with a distinct subset of the patches. With this decomposition, the physics calculations involve only grid points and data local to a processor and are performed in parallel. Using parallel algorithms developed for the semi-Lagrangian transport, the fast Fourier transform and the Legendre transform, both physics and dynamics are computed in parallel with minimal data movement and modest change to the original CCM2 source code. Sequential or parallel history tapes are written and input files (in history tape format) are read sequentially by the parallel code to promote compatibility with production use of the model on other computer systems. A validation exercise has been performed with the parallel code and is detailed along with some performance numbers on the Intel Paragon and the IBM SP2. A discussion of reproducibility of results is included. A user`s guide for the PCCM2 version 2.1 on the various parallel machines completes the report. Procedures for compilation, setup and execution are given. A discussion of code internals is included for those who may wish to modify and use the program in their own research.

  8. Solid Waste Projection Model: Model user's guide

    International Nuclear Information System (INIS)

    Stiles, D.L.; Crow, V.L.

    1990-08-01

    The Solid Waste Projection Model (SWPM) system is an analytical tool developed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford company (WHC) specifically to address solid waste management issues at the Hanford Central Waste Complex (HCWC). This document, one of six documents supporting the SWPM system, contains a description of the system and instructions for preparing to use SWPM and operating Version 1 of the model. 4 figs., 1 tab

  9. AMEM-ADL Polymer Migration Estimation Model User's Guide

    Science.gov (United States)

    The user's guide of the Arthur D. Little Polymer Migration Estimation Model (AMEM) provides the information on how the model estimates the fraction of a chemical additive that diffuses through polymeric matrices.

  10. Insider safeguards effectiveness model (ISEM). User's guide

    International Nuclear Information System (INIS)

    Boozer, D.D.; Engi, D.

    1977-11-01

    A comprehensive presentation of the ISEM computer program is provided. ISEM was designed to evaluate the effectiveness of a fixed-site facility safeguards system in coping with the theft, sabotage, or dispersal of radiological material by a single person who has authorized access to the facility. This insider may be aided by a group of insiders who covertly degrade sensor systems. Each ISEM run evaluates safeguards system performance for a particular scenario specified by the user. The dispatching of guards following alarms and their interaction with the insider are explicitly treated by the model

  11. Macro System Model (MSM) User Guide, Version 1.3

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, M.; Diakov, V.; Sa, T.; Goldsby, M.

    2011-09-01

    This user guide describes the macro system model (MSM). The MSM has been designed to allow users to analyze the financial, environmental, transitional, geographical, and R&D issues associated with the transition to a hydrogen economy. Basic end users can use the MSM to answer cross-cutting questions that were previously difficult to answer in a consistent and timely manner due to various assumptions and methodologies among different models.

  12. HYDROCARBON SPILL SCREENING MODEL (HSSM) VOLUME 1: USER'S GUIDE

    Science.gov (United States)

    This users guide describes the Hydrocarbon Spill Screening Model (HSSM). The model is intended for simulation of subsurface releases of light nonaqueous phase liquids (LNAPLs). The model consists of separate modules for LNAPL flow through the vadose zone, spreading in the capil...

  13. Building integral projection models: a user's guide.

    Science.gov (United States)

    Rees, Mark; Childs, Dylan Z; Ellner, Stephen P

    2014-05-01

    In order to understand how changes in individual performance (growth, survival or reproduction) influence population dynamics and evolution, ecologists are increasingly using parameterized mathematical models. For continuously structured populations, where some continuous measure of individual state influences growth, survival or reproduction, integral projection models (IPMs) are commonly used. We provide a detailed description of the steps involved in constructing an IPM, explaining how to: (i) translate your study system into an IPM; (ii) implement your IPM; and (iii) diagnose potential problems with your IPM. We emphasize how the study organism's life cycle, and the timing of censuses, together determine the structure of the IPM kernel and important aspects of the statistical analysis used to parameterize an IPM using data on marked individuals. An IPM based on population studies of Soay sheep is used to illustrate the complete process of constructing, implementing and evaluating an IPM fitted to sample data. We then look at very general approaches to parameterizing an IPM, using a wide range of statistical techniques (e.g. maximum likelihood methods, generalized additive models, nonparametric kernel density estimators). Methods for selecting models for parameterizing IPMs are briefly discussed. We conclude with key recommendations and a brief overview of applications that extend the basic model. The online Supporting Information provides commented R code for all our analyses. © 2014 The Authors. Journal of Animal Ecology published by John Wiley & Sons Ltd on behalf of British Ecological Society.

  14. Solid Waste Projection Model: Database User's Guide

    International Nuclear Information System (INIS)

    Blackburn, C.L.

    1993-10-01

    The Solid Waste Projection Model (SWPM) system is an analytical tool developed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford Company (WHC) specifically to address Hanford solid waste management issues. This document is one of a set of documents supporting the SWPM system and providing instructions in the use and maintenance of SWPM components. This manual contains instructions for using Version 1.4 of the SWPM database: system requirements and preparation, entering and maintaining data, and performing routine database functions. This document supports only those operations which are specific to SWPM database menus and functions and does not Provide instruction in the use of Paradox, the database management system in which the SWPM database is established

  15. H2A Production Model, Version 2 User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Steward, D.; Ramsden, T.; Zuboy, J.

    2008-09-01

    The H2A Production Model analyzes the technical and economic aspects of central and forecourt hydrogen production technologies. Using a standard discounted cash flow rate of return methodology, it determines the minimum hydrogen selling price, including a specified after-tax internal rate of return from the production technology. Users have the option of accepting default technology input values--such as capital costs, operating costs, and capacity factor--from established H2A production technology cases or entering custom values. Users can also modify the model's financial inputs. This new version of the H2A Production Model features enhanced usability and functionality. Input fields are consolidated and simplified. New capabilities include performing sensitivity analyses and scaling analyses to various plant sizes. This User Guide helps users already familiar with the basic tenets of H2A hydrogen production cost analysis get started using the new version of the model. It introduces the basic elements of the model then describes the function and use of each of its worksheets.

  16. NASA AVOSS Fast-Time Wake Prediction Models: User's Guide

    Science.gov (United States)

    Ahmad, Nash'at N.; VanValkenburg, Randal L.; Pruis, Matthew

    2014-01-01

    The National Aeronautics and Space Administration (NASA) is developing and testing fast-time wake transport and decay models to safely enhance the capacity of the National Airspace System (NAS). The fast-time wake models are empirical algorithms used for real-time predictions of wake transport and decay based on aircraft parameters and ambient weather conditions. The aircraft dependent parameters include the initial vortex descent velocity and the vortex pair separation distance. The atmospheric initial conditions include vertical profiles of temperature or potential temperature, eddy dissipation rate, and crosswind. The current distribution includes the latest versions of the APA (3.4) and the TDP (2.1) models. This User's Guide provides detailed information on the model inputs, file formats, and the model output. An example of a model run and a brief description of the Memphis 1995 Wake Vortex Dataset is also provided.

  17. Interactive Rapid Dose Assessment Model (IRDAM): user's guide

    International Nuclear Information System (INIS)

    Poeton, R.W.; Moeller, M.P.; Laughlin, G.J.; Desrosiers, A.E.

    1983-05-01

    As part of the continuing emphasis on emergency preparedness the US Nuclear Regulatory Commission (NRC) sponsored the development of a rapid dose assessment system by Pacific Northwest Laboratory (PNL). This system, the Interactive Rapid Dose Assessment Model (IRDAM) is a micro-computer based program for rapidly assessing the radiological impact of accidents at nuclear power plants. This User's Guide provides instruction in the setup and operation of the equipment necessary to run IRDAM. Instructions are also given on how to load the magnetic disks and access the interactive part of the program. Two other companion volumes to this one provide additional information on IRDAM. Reactor Accident Assessment Methods (NUREG/CR-3012, Volume 2) describes the technical bases for IRDAM including methods, models and assumptions used in calculations. Scenarios for Comparing Dose Assessment Models (NUREG/CR-3012, Volume 3) provides the results of calculations made by IRDAM and other models for specific accident scenarios

  18. CRACUK user's guide

    International Nuclear Information System (INIS)

    Egan, M.J.; Nixon, W.; Brearley, I.R.

    1986-08-01

    The CRACUK computer code is a revised version of the US consequence modelling code CRAC2, adapted to suit UK applications. Modifications to various models within the code have led to certain changes in the input data requirements for CRACUK in comparison with CRAC2. This guide, written in the form of an Appendix to the CRAC2 User Guide, includes descriptions of the input data layout as it has been altered for use in CRACUK. Used in conjunction with the CRAC2 User Guide, this publication should allow easy use of the CRACUK code. (author)

  19. VISION User Guide - VISION (Verifiable Fuel Cycle Simulation) Model

    Energy Technology Data Exchange (ETDEWEB)

    Jacob J. Jacobson; Robert F. Jeffers; Gretchen E. Matthern; Steven J. Piet; Benjamin A. Baker; Joseph Grimm

    2009-08-01

    The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R&D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating “what if” scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level for U.S. nuclear power. The model is not intended as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., “reactor types” not individual reactors and “separation types” not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation of disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. Note that recovered uranium is itself often partitioned: some RU flows with recycled transuranic elements, some flows with wastes, and the rest is designated RU. RU comes out of storage if needed to correct the U/TRU ratio in new recycled fuel. Neither RU nor DU are designated as wastes. VISION is comprised of several

  20. VISION User Guide - VISION (Verifiable Fuel Cycle Simulation) Model

    International Nuclear Information System (INIS)

    Jacobson, Jacob J.; Jeffers, Robert F.; Matthern, Gretchen E.; Piet, Steven J.; Baker, Benjamin A.; Grimm, Joseph

    2009-01-01

    The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R and D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating 'what if' scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level for U.S. nuclear power. The model is not intended as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., 'reactor types' not individual reactors and 'separation types' not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation of disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. Note that recovered uranium is itself often partitioned: some RU flows with recycled transuranic elements, some flows with wastes, and the rest is designated RU. RU comes out of storage if needed to correct the U/TRU ratio in new recycled fuel. Neither RU nor DU are designated as wastes. VISION is comprised of several Microsoft

  1. Hanford Soil Inventory Model (SIM) Rev. 1 Users Guide

    International Nuclear Information System (INIS)

    Simpson, Brett C.; Corbin, Rob A.; Anderson, Michael J.; Kincaid, Charles T.

    2006-01-01

    The focus of the development and application of a soil inventory model as part of the Remediation and Closure Science (RCS) Project managed by PNNL was to develop a probabilistic approach to estimate comprehensive, mass balanced-based contaminant inventories for the Hanford Site post-closure setting. The outcome of this effort was the Hanford Soil Inventory Model (SIM). This document is a user's guide for the Hanford SIM. The principal project requirement for the SIM was to provide comprehensive quantitative estimates of contaminant inventory and its uncertainty for the various liquid waste sites, unplanned releases, and past tank farm leaks as a function of time and location at Hanford. The majority, but not all of these waste sites are in the 200 Areas of Hanford where chemical processing of spent fuel occurred. A computer model capable of performing these calculations and providing satisfactory quantitative output representing a robust description of contaminant inventory and uncertainty for use in other subsequent models was determined to be satisfactory to address the needs of the RCS Project. The ability to use familiar, commercially available software on high-performance personal computers for data input, modeling, and analysis, rather than custom software on a workstation or mainframe computer for modeling, was desired

  2. Hanford Soil Inventory Model (SIM) Rev. 1 Users Guide

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Brett C.; Corbin, Rob A.; Anderson, Michael J.; Kincaid, Charles T.

    2006-09-25

    The focus of the development and application of a soil inventory model as part of the Remediation and Closure Science (RCS) Project managed by PNNL was to develop a probabilistic approach to estimate comprehensive, mass balanced-based contaminant inventories for the Hanford Site post-closure setting. The outcome of this effort was the Hanford Soil Inventory Model (SIM). This document is a user's guide for the Hanford SIM. The principal project requirement for the SIM was to provide comprehensive quantitative estimates of contaminant inventory and its uncertainty for the various liquid waste sites, unplanned releases, and past tank farm leaks as a function of time and location at Hanford. The majority, but not all of these waste sites are in the 200 Areas of Hanford where chemical processing of spent fuel occurred. A computer model capable of performing these calculations and providing satisfactory quantitative output representing a robust description of contaminant inventory and uncertainty for use in other subsequent models was determined to be satisfactory to address the needs of the RCS Project. The ability to use familiar, commercially available software on high-performance personal computers for data input, modeling, and analysis, rather than custom software on a workstation or mainframe computer for modeling, was desired.

  3. Simplified analytical model of penetration with lateral loading -- User`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Young, C.W.

    1998-05-01

    The SAMPLL (Simplified Analytical Model of Penetration with Lateral Loading) computer code was originally developed in 1984 to realistically yet economically predict penetrator/target interactions. Since the code`s inception, its use has spread throughout the conventional and nuclear penetrating weapons community. During the penetrator/target interaction, the resistance of the material being penetrated imparts both lateral and axial loads on the penetrator. These loads cause changes to the penetrator`s motion (kinematics). SAMPLL uses empirically based algorithms, formulated from an extensive experimental data base, to replicate the loads the penetrator experiences during penetration. The lateral loads resulting from angle of attack and trajectory angle of the penetrator are explicitly treated in SAMPLL. The loads are summed and the kinematics calculated at each time step. SAMPLL has been continually improved, and the current version, Version 6.0, can handle cratering and spall effects, multiple target layers, penetrator damage/failure, and complex penetrator shapes. Version 6 uses the latest empirical penetration equations, and also automatically adjusts the penetrability index for certain target layers to account for layer thickness and confinement. This report describes the SAMPLL code, including assumptions and limitations, and includes a user`s guide.

  4. NPAS Users Guide

    International Nuclear Information System (INIS)

    1984-01-01

    This NPAS Users Guide is primarily intended as a source of information about policies, procedures, and facilities appropriate for users in the program of Nuclear Physics at SLAC (NPAS). General policies and practices are described, the preparation of proposals is discussed, and the services for users is outlined. SLAC experimental facilities are described, and contacts are listed

  5. GCFM Users Guide Revision for Model Version 5.0

    Energy Technology Data Exchange (ETDEWEB)

    Keimig, Mark A.; Blake, Coleman

    1981-08-10

    This paper documents alterations made to the MITRE/DOE Geothermal Cash Flow Model (GCFM) in the period of September 1980 through September 1981. Version 4.0 of GCFM was installed on the computer at the DOE San Francisco Operations Office in August 1980. This Version has also been distributed to about a dozen geothermal industry firms, for examination and potential use. During late 1980 and 1981, a few errors detected in the Version 4.0 code were corrected, resulting in Version 4.1. If you are currently using GCFM Version 4.0, it is suggested that you make the changes to your code that are described in Section 2.0. User's manual changes listed in Section 3.0 and Section 4.0 should then also be made.

  6. Accelerator facilities users' guide

    International Nuclear Information System (INIS)

    Walter, H.C.; Adrion, L.; Frosch, R.; Salzmann, M.

    1994-07-01

    In 1981 the ''Green Book'' of SIN was distributed, a User Handbook serving the needs of people already working at SIN as well as informing new users about our installations. An update of the Green Book is necessary because many beams have disappeared, been modified or added, and the installation has been upgraded in intensity and versatility quite considerably. The spectrum of users has shifted away from nuclear and particle physics; applications in medicine, solid state physics and materials science have gained in importance. This Users' Guide is intended to inform our users about the changes, and to interest potential new users in coming to PSI. (author) figs., tabs

  7. VOLTTRON: User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Lutes, Robert G.; Katipamula, Srinivas; Akyol, Bora A.; Tenney, Nathan D.; Haack, Jereme N.; Monson, Kyle E.; Carpenter, Brandon J.

    2014-04-24

    This document is a user guide for the deployment of the Transactional Network platform and agent/application development within the VOLTTRON. The intent of this user guide is to provide a description of the functionality of the Transactional Network Platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

  8. EURALERT-89 user's guide

    International Nuclear Information System (INIS)

    Mueller, H.; Friedland, W.; Proehl, G.; Paretzke, H.G.

    1990-09-01

    EURALERT-89 is a dose assessment program system including countermeasures which has been developed in the framework of the C.E.C. research programme 'Radiological aspects of nuclear accident scenarios'. For this purpose the ECOSYS model for calculating the transfer of radionuclides through the environment, the contamination of foodstuffs and potential doses has been adapted to real-time use in the different European countries. In this user's guide the file names are given in the form SUBD/FNAM; this means that the data file with name FNAM is in the subdirectory SUBD. Remember that writing the path of a file depends on the computer used. With EURALERT-89 it is relatively simple to get an estimate of the most important informations (deposition, maximum specific activities in foodstuffs, most important dose values) for all locations which are included in the input file. This goal can be achieved with only a few commands. (orig./HP)

  9. Petroleum Refinery Jobs and Economic Development Impact (JEDI) Model User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Marshall [MRG and Associates, Nevada City, CA (United States)

    2013-12-31

    The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are user-friendly tools utilized to estimate the economic impacts at the local level of constructing and operating fuel and power generation projects for a range of conventional and renewable energy technologies. The JEDI Petroleum Refinery Model User Reference Guide was developed to assist users in employing and understanding the model. This guide provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the model estimates job creation, earning and output (total economic activity) for a given petroleum refinery. This includes the direct, indirect and induced economic impacts to the local economy associated with the refinery's construction and operation phases. Project cost and job data used in the model are derived from the most current cost estimations available. Local direct and indirect economic impacts are estimated using economic multipliers derived from IMPLAN software. By determining the regional economic impacts and job creation for a proposed refinery, the JEDI Petroleum Refinery model can be used to field questions about the added value refineries may bring to the local community.

  10. The OSIRIS user guide

    CERN Document Server

    Telling, M T F

    2003-01-01

    This user guide contains all the information necessary to perform a successful neutron scattering experiment on the OSIRIS spectrometer at ISIS, RAL, UK. Since OSIRIS is a continually evolving and improving instrument some information contained within this manual may become redundant. However, the basic instrument operating procedures should remain essentially unchanged. While updated manuals will be produced when appropriate, the most comprehensive source of information concerning OSIRIS is the Instrument Scientist/Local Contact. It would be appreciated, however, if this user guide were the first point of call should problems arise

  11. Solar Advisor Model User Guide for Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Gilman, P.; Blair, N.; Mehos, M.; Christensen, C.; Janzou, S.; Cameron, C.

    2008-08-01

    The Solar Advisor Model (SAM) provides a consistent framework for analyzing and comparing power system costs and performance across the range of solar technologies and markets, from photovoltaic systems for residential and commercial markets to concentrating solar power and large photovoltaic systems for utility markets. This manual describes Version 2.0 of the software, which can model photovoltaic and concentrating solar power technologies for electric applications for several markets. The current version of the Solar Advisor Model does not model solar heating and lighting technologies.

  12. User's guide to the LIRAQ model: an air pollution model for the San Francisco Bay Area

    International Nuclear Information System (INIS)

    MacCracken, M.C.

    1975-01-01

    The Livermore Regional Air Quality (LIRAQ) model comprises a set of computer programs that have been integrated into an easily used tool for the air quality planner. To assemble and modify the necessary data files and to direct model execution, a problem formulation program has been developed that makes possible the setup of a wide variety of studies involving perturbation of the emission inventory, changes to the initial and boundary conditions, and different choices of grid size and problem domain. In addition to describing the types of air quality problems for which the LIRAQ model may be used, this User's Guide provides detailed information on how to set up and conduct model simulations. Also included are descriptions of the formats of input data files so that the LIRAQ model may be applied to regions other than the San Francisco Bay Area

  13. User's guide for waste tank corrosion data model code

    International Nuclear Information System (INIS)

    Mackey, D.B.; Divine, J.R.

    1986-12-01

    Corrosion tests were conducted on A-516 and A-537 carbon steel in simulated Double Shell Slurry, Future PUREX, and Hanford Facilities wastes. The corrosion rate data, gathered between 25 and 180 0 C, were statistically ''modeled'' for each waste; a fourth model was developed that utilized the combined data. The report briefly describes the modeling procedure and details on how to access information through a computerized data system. Copies of the report and operating information may be obtained from the author (DB Mackey) at 509-376-9844 of FTS 444-9844

  14. Jobs and Economic Development Impact (JEDI) User Reference Guide: Fast Pyrolysis Biorefinery Model

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yimin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goldberg, Marshall [MRG and Associates, Nevada City, CA (United States)

    2015-02-01

    This guide -- the JEDI Fast Pyrolysis Biorefinery Model User Reference Guide -- was developed to assist users in operating and understanding the JEDI Fast Pyrolysis Biorefinery Model. The guide provides information on the model's underlying methodology, as well as the parameters and data sources used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the JEDI Fast Pyrolysis Biorefinery Model estimates local (e.g., county- or state-level) job creation, earnings, and output from total economic activity for a given fast pyrolysis biorefinery. These estimates include the direct, indirect and induced economic impacts to the local economy associated with the construction and operation phases of biorefinery projects.Local revenue and supply chain impacts as well as induced impacts are estimated using economic multipliers derived from the IMPLAN software program. By determining the local economic impacts and job creation for a proposed biorefinery, the JEDI Fast Pyrolysis Biorefinery Model can be used to field questions about the added value biorefineries might bring to a local community.

  15. Mars Global Reference Atmospheric Model 2010 Version: Users Guide

    Science.gov (United States)

    Justh, H. L.

    2014-01-01

    This Technical Memorandum (TM) presents the Mars Global Reference Atmospheric Model 2010 (Mars-GRAM 2010) and its new features. Mars-GRAM is an engineering-level atmospheric model widely used for diverse mission applications. Applications include systems design, performance analysis, and operations planning for aerobraking, entry, descent and landing, and aerocapture. Additionally, this TM includes instructions on obtaining the Mars-GRAM source code and data files as well as running Mars-GRAM. It also contains sample Mars-GRAM input and output files and an example of how to incorporate Mars-GRAM as an atmospheric subroutine in a trajectory code.

  16. Offshore and coastal dispersion (OCD) model. Users guide

    International Nuclear Information System (INIS)

    Hanna, S.R.; Schulman, L.L.; Paine, R.J.; Pleim, J.E.

    1984-09-01

    The Offshore and Coastal Dispersion (OCD) model was adapted from the EPA guideline model MPTER to simulate the effect of offshore emissions from point sources in coastal regions. Modifications were made to incorporate overwater plume transport and dispersion as well as changes that occur as the plume crosses the shoreline. Hourly meteorological data are needed from overwater and overland locations. Turbulence intensities are used but are not mandatory. For overwater dispersion, the turbulence intensities are parameterized from boundary-layer similarity relationships if they are not measured. Specifications of emission characteristics and receptor locations are the same as for MPTER; 250 point sources and 180 receptors may be used

  17. Toolkit for Conceptual Modeling (TCM): User's Guide and Reference

    NARCIS (Netherlands)

    Dehne, F.; Wieringa, Roelf J.

    1997-01-01

    The Toolkit for Conceptual Modeling (TCM) is a suite of graphical editors for a number of graphical notation systems that are used in software specification methods. The notations can be used to represent the conceptual structure of the software - hence the name of the suite. This manual describes

  18. Users guide for the hydroacoustic coverage assessment model (HydroCAM)

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, T., LLNL

    1997-12-01

    A model for predicting the detection and localization performance of hydroacoustic monitoring networks has been developed. The model accounts for major factors affecting global-scale acoustic propagation in the ocean. including horizontal refraction, travel time variability due to spatial and temporal fluctuations in the ocean, and detailed characteristics of the source. Graphical user interfaces are provided to setup the models and visualize the results. The model produces maps of network detection coverage and localization area of uncertainty, as well as intermediate results such as predicted path amplitudes, travel time and travel time variance. This Users Guide for the model is organized into three sections. First a summary of functionality available in the model is presented, including example output products. The second section provides detailed descriptions of each of models contained in the system. The last section describes how to run the model, including a summary of each data input form in the user interface.

  19. SALOME. User's guide

    International Nuclear Information System (INIS)

    Zastrow, K.D.

    1994-01-01

    A user's guide for a least squares fit analysis program is presented, which has been developed for VUV and visible plasma spectroscopy on the Extrap-T1 experiment. The program can be used for line and multiplet identification, multiplet intensity and line width measurements. Atomic data are used extensively to aid the interpretation of the spectra. 7 figs

  20. Transmission Line Jobs and Economic Development Impact (JEDI) Model User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, M.; Keyser, D.

    2013-10-01

    The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are freely available, user-friendly tools that estimate the potential economic impacts of constructing and operating power generation projects for a range of conventional and renewable energy technologies. The Transmission Line JEDI model can be used to field questions about the economic impacts of transmission lines in a given state, region, or local community. This Transmission Line JEDI User Reference Guide was developed to provide basic instruction on operating the model and understanding the results. This guide also provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data contained in the model.

  1. Jobs and Economic Development Impact (JEDI) Model: Offshore Wind User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, E.; Goldberg, M.; Keyser, D.

    2013-06-01

    The Offshore Wind Jobs and Economic Development Impact (JEDI) model, developed by NREL and MRG & Associates, is a spreadsheet based input-output tool. JEDI is meant to be a user friendly and transparent tool to estimate potential economic impacts supported by the development and operation of offshore wind projects. This guide describes how to use the model as well as technical information such as methodology, limitations, and data sources.

  2. Raspberry Pi user guide

    CERN Document Server

    Upton, Eben

    2013-01-01

    The essential guide to getting started with the Raspberry Pi ® The Raspberry Pi has been a success beyond the dream of its creators. Their goal, to encourage a new generation of computer programmers who understand how computers work, is well under way. Raspberry Pi User Guide 2e is the newest edition of the runaway bestseller written by the Pi's co-creator, Eben Upton, and tech writer Gareth Halfacree. It contains everything you need to know to get the Pi up and running, including how to: Connect a keyboard, mouse, monitor and other peripheralsInstall software and configure your Raspberry

  3. Raspberry Pi user guide

    CERN Document Server

    Halfacree, Gareth

    2012-01-01

    Make the most out of the world’s first truly compact computer It's the size of a credit card, it can be charged like a smartphone, it runs on open-source Linux, and it holds the promise of bringing programming and playing to millions at low cost. And now you can learn how to use this amazing computer from its co-creator, Eben Upton, in Raspberry Pi User Guide. Cowritten with Gareth Halfacree, this guide gets you up and running on Raspberry Pi, whether you're an educator, hacker, hobbyist, or kid. Learn how to connect your Pi to other hardware, install software, write basic programs, an

  4. COLETTE users' guide

    International Nuclear Information System (INIS)

    Heenan, R.W.; King, S.M.; Osborn, R.; Stanley, H.B.

    1989-12-01

    This guide describes the computer program COLETTE. It has been purposely designed to reduce the small-angle data collected on the ISIS small-angle neutron camera LOQ in an interactive and user-friendly manner. This not only gives the LOQ user an opportunity to inspect data rapidly and comprehensively during the course of an experiment but also provides the instrument scientists with a flexible diagnostic tool with which they can monitor the performance of the instrument. After the experiment is completed, COLETTE may be used to provide the final I(Q) versus Q following subtraction of a sample background run and normalisation to a scattering standard. By limiting the range of azimuthal angles included in the analysis the program may take sections through an anisotropic scattering pattern from an ordered system. A completely two dimensional I(Q x ,Q y ) map may also be generated. (author)

  5. Wilmar Planning Tool, user guide

    International Nuclear Information System (INIS)

    Larsen, Helge V.

    2006-01-01

    This is a short user guide to the Wilmar Planning Tool developed in the project Wind Power Integration in Liberalised Electricity Markets (WILMAR) supported by EU (Contract No. ENK5-CT-2002-00663). A User Shell implemented in an Excel workbook controls the Wilmar Planning Tool. All data are contained in Access databases that communicate with various sub-models through text files that are exported from or imported to the databases. In the User Shell various scenario variables and control parameters are set, and export of model data from the input database, activation of the models, as well as import of model results to the output database are triggered from the shell. (au)

  6. COATING ALTERNATIVES GUIDE (CAGE) USER'S GUIDE

    Science.gov (United States)

    The guide provides instructions for using the Coating Alternatives GuidE (CAGE) software program, version 1.0. It assumes that the user is familiar with the fundamentals of operating an IBM-compatible personal computer (PC) under the Microsoft disk operating system (MS-DOS). CAGE...

  7. Tracking and Analysis Framework (TAF) model documentation and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Bloyd, C.; Camp, J.; Conzelmann, G. [and others

    1996-12-01

    With passage of the 1990 Clean Air Act Amendments, the United States embarked on a policy for controlling acid deposition that has been estimated to cost at least $2 billion. Title IV of the Act created a major innovation in environmental regulation by introducing market-based incentives - specifically, by allowing electric utility companies to trade allowances to emit sulfur dioxide (SO{sub 2}). The National Acid Precipitation Assessment Program (NAPAP) has been tasked by Congress to assess what Senator Moynihan has termed this {open_quotes}grand experiment.{close_quotes} Such a comprehensive assessment of the economic and environmental effects of this legislation has been a major challenge. To help NAPAP face this challenge, the U.S. Department of Energy (DOE) has sponsored development of an integrated assessment model, known as the Tracking and Analysis Framework (TAF). This section summarizes TAF`s objectives and its overall design.

  8. Dynamic energy conservation model REDUCE. Extension with experience curves, energy efficiency indicators and user's guide

    International Nuclear Information System (INIS)

    Uyterlinde, M.A.; Rijkers, F.A.M.

    1999-12-01

    The main objective of the energy conservation model REDUCE (Reduction of Energy Demand by Utilization of Conservation of Energy) is the evaluation of the effectiveness of economical, financial, institutional, and regulatory measures for improving the rational use of energy in end-use sectors. This report presents the results of additional model development activities, partly based on the first experiences in a previous project. Energy efficiency indicators have been added as an extra tool for output analysis in REDUCE. The methodology is described and some examples are given. The model has been extended with a method for modelling the effects of technical development on production costs, by means of an experience curve. Finally, the report provides a 'users guide', by describing in more detail the input data specification as well as all menus and buttons. 19 refs

  9. User's Guide for the Agricultural Non-Point Source (AGNPS) Pollution Model Data Generator

    Science.gov (United States)

    Finn, Michael P.; Scheidt, Douglas J.; Jaromack, Gregory M.

    2003-01-01

    BACKGROUND Throughout this user guide, we refer to datasets that we used in conjunction with developing of this software for supporting cartographic research and producing the datasets to conduct research. However, this software can be used with these datasets or with more 'generic' versions of data of the appropriate type. For example, throughout the guide, we refer to national land cover data (NLCD) and digital elevation model (DEM) data from the U.S. Geological Survey (USGS) at a 30-m resolution, but any digital terrain model or land cover data at any appropriate resolution will produce results. Another key point to keep in mind is to use a consistent data resolution for all the datasets per model run. The U.S. Department of Agriculture (USDA) developed the Agricultural Nonpoint Source (AGNPS) pollution model of watershed hydrology in response to the complex problem of managing nonpoint sources of pollution. AGNPS simulates the behavior of runoff, sediment, and nutrient transport from watersheds that have agriculture as their prime use. The model operates on a cell basis and is a distributed parameter, event-based model. The model requires 22 input parameters. Output parameters are grouped primarily by hydrology, sediment, and chemical output (Young and others, 1995.) Elevation, land cover, and soil are the base data from which to extract the 22 input parameters required by the AGNPS. For automatic parameter extraction, follow the general process described in this guide of extraction from the geospatial data through the AGNPS Data Generator to generate input parameters required by the pollution model (Finn and others, 2002.)

  10. Documentation and user's guide for DOSTOMAN: a pathways computer model of radionuclide movement

    International Nuclear Information System (INIS)

    Root, R.W. Jr.

    1980-01-01

    This report documents the mathematical development and the computer implementation of the Savannah River Laboratory computer code used to simulate radonuclide movement in the environment. The user's guide provides all the necessary information for the prospective user to input the required data, execute the computer program, and display the results

  11. User Guide for VISION 3.4.7 (Verifiable Fuel Cycle Simulation) Model

    Energy Technology Data Exchange (ETDEWEB)

    Jacob J. Jacobson; Robert F. Jeffers; Gretchen E. Matthern; Steven J. Piet; Wendell D. Hintze

    2011-07-01

    The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters and options; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R&D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating 'what if' scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level. The model is not intended as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., 'reactor types' not individual reactors and 'separation types' not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation or disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. VISION is comprised of several Microsoft Excel input files, a Powersim Studio core, and several Microsoft Excel output files. All must be co-located in the same folder on a PC to function. You must use Powersim Studio 8 or better. We have tested VISION with the Studio 8 Expert, Executive, and Education versions

  12. PST user's guide

    International Nuclear Information System (INIS)

    Rempe, J.L.; Cebull, M.J.; Gilbert, B.G.

    1996-10-01

    The Parametric Source Term (PST) software allows estimation of radioactivity release fractions for Level 2 Probabilistic Safety Assessments (PSAs). PST was developed at the Idaho National Engineering Laboratory (INEL) for the Nuclear Regulatory Commission's (NRC's) Accident Sequence Precursor (ASP) Program. PST contains a framework of equations that model activity transport between volumes in the release pathway from the core, through the vessel, through the containment, and to the environment. PST quickly obtains exact solutions to differential equations for activity transport in each volume for each time interval. PST provides a superior method for source term estimation because it: ensures conservation of activity transported across various volumes in the release pathway; provides limited consideration of the time-dependent behavior of input parameter uncertainty distributions; allows input to be quantified using state-of-the-art severe accident analysis code results; increases modeling flexibility because linkage between volumes is specified by user input; and allows other types of Light Water Reactor (LWR) plant designs to be evaluated with minimal modifications. PST is a microcomputer-based system that allows the analyst more flexibility than a mainframe system. PST has been developed to run with both MS DOS and MS Windows 95/NT operating systems. PST has the capability to load ASP Source Term Vector (STV) information, import pre-specified default input for the 6 Pressurized Water Reactors (PWRs) initially analyzed in the NRC ASP program, allow input value modifications for release fraction sensitivity studies, export user-specified default input for the LWR being modeled, report results of radioactivity release calculations at each time interval, and generate formatted results that can interface with other risk assessment codes. This report describes the PST model and provides guidelines for using PST

  13. TAILSIM Users Guide

    Science.gov (United States)

    Hiltner, Dale W.

    2000-01-01

    The TAILSIM program uses a 4th order Runge-Kutta method to integrate the standard aircraft equations-of-motion (EOM). The EOM determine three translational and three rotational accelerations about the aircraft's body axis reference system. The forces and moments that drive the EOM are determined from aerodynamic coefficients, dynamic derivatives, and control inputs. Values for these terms are determined from linear interpolation of tables that are a function of parameters such as angle-of-attack and surface deflections. Buildup equations combine these terms and dimensionalize them to generate the driving total forces and moments. Features that make TAILSIM applicable to studies of tailplane stall include modeling of the reversible control System, modeling of the pilot performing a load factor and/or airspeed command task, and modeling of vertical gusts. The reversible control system dynamics can be described as two hinged masses connected by a spring. resulting in a fifth order system. The pilot model is a standard form of lead-lag with a time delay applied to an integrated pitch rate and/or airspeed error feedback. The time delay is implemented by a Pade approximation, while the commanded pitch rate is determined by a commanded load factor. Vertical gust inputs include a single 1-cosine gust and a continuous NASA Dryden gust model. These dynamic models. coupled with the use of a nonlinear database, allow the tailplane stall characteristics, elevator response, and resulting aircraft response, to be modeled. A useful output capability of the TAILSIM program is the ability to display multiple post-run plot pages to allow a quick assessment of the time history response. There are 16 plot pages currently available to the user. Each plot page displays 9 parameters. Each parameter can also be displayed individually. on a one plot-per-page format. For a more refined display of the results the program can also create files of tabulated data. which can then be used by other

  14. OpenEIS. Users Guide

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Woohyun [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lutes, Robert G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Katipamula, Srinivas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Haack, Jereme N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carpenter, Brandon J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Akyol, Bora A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Monson, Kyle E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Allwardt, Craig H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kang, Timothy [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sharma, Poorva [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-02-28

    This document is a users guide for OpenEIS, a software code designed to provide standard methods for authoring, sharing, testing, using and improving algorithms for operational building energy efficiency.

  15. PREDICTING ATTENUATION OF VIRUSES DURING PERCOLATION IN SOILS: 2. USER'S GUIDE TO THE VIRULO 1.0 COMPUTER MODEL

    Science.gov (United States)

    In the EPA document Predicting Attenuation of Viruses During Percolation in Soils 1. Probabilistic Model the conceptual, theoretical, and mathematical foundations for a predictive screening model were presented. In this current volume we present a User's Guide for the computer mo...

  16. User Guide for the International Jobs and Economic Development Impacts Model

    Energy Technology Data Exchange (ETDEWEB)

    Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Uriarte, Caroline [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cox, Sadie [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    The International Jobs and Economic Development Impacts (I-JEDI) model is a freely available economic model that estimates gross economic impacts from wind, solar, and geothermal energy projects for several different countries. Building on the original JEDI model, which was developed for the United States, I-JEDI was developed under the USAID Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program to support countries in assessing economic impacts of LEDS actions in the energy sector. I-JEDI estimates economic impacts by characterizing the construction and operation of energy projects in terms of expenditures and the portion of these expenditures made within the country of analysis. These data are then used in a country-specific input-output (I-O) model to estimate employment, earnings, gross domestic product (GDP), and gross output impacts. Total economic impacts are presented as well as impacts by industry. This user guide presents general information about how to use I-JEDI and interpret results as well as detailed information about methodology and model limitations.

  17. Description of the new version 4.0 of the tritium model UFOTRI including user guide

    International Nuclear Information System (INIS)

    Raskob, W.

    1993-08-01

    In view of the future operation of fusion reactors the release of tritium may play a dominant role during normal operation as well as after accidents. Because of its physical and chemical properties which differ significantly from those of other radionuclides, the model UFOTRI for assessing the radiological consequences of accidental tritium releases has been developed. It describes the behaviour of tritium in the biosphere and calculates the radiological impact on individuals and the population due to the direct exposure and by the ingestion pathways. Processes such as the conversion of tritium gas into tritiated water (HTO) in the soil, re-emission after deposition and the conversion of HTO into organically bound tritium, are considered. The use of UFOTRI in its probabilistic mode shows the spectrum of the radiological impact together with the associated probability of occurrence. A first model version was established in 1991. As the ongoing work on investigating the main processes of the tritium behaviour in the environment shows up new results, the model has been improved in several points. The report describes the changes incorporated into the model since 1991. Additionally provides the up-dated user guide for handling the revised UFOTRI version which will be distributed to interested organizations. (orig.) [de

  18. User's guide for simulation of waste treatment (SWAT) model

    Energy Technology Data Exchange (ETDEWEB)

    Macal, C.M.

    1979-04-01

    This document is a user's guide for the Simulation of Waste Treatment (SWAT) model computer code. (A detailed description of the logic and assumptions of the model was published previously.) A flow diagram depicting the logic of the SWAT computer code is included. Several river basins or regions can be simulated in a single computer run, with each region having numerous treatment plants. Treatment plants are simulated sequentially to reduce computer storage requirements. All input to the model is in the form of cards and all output is to a line printer. The code is written in FORTRAN IV and consists of approximately 3000 statements. Using the IBM 370/195 under OS, a Gl compiler requires a region of 220K. Execution time is under two minutes for a typical run for a river basin with 23 treatment plants, with each plant having an average of one technology modification over a simulation period of 25 years. In the first section of this report a brief description of the subroutines in the model is given along with an explanation of how the subroutines function in the context of the whole program. The third section indicates formatting for input data; sample input data for a test problem are also presented. Section 4 describes the output resulting from the sample input data. A program listing appears in the appendix.

  19. Drush User's Guide

    CERN Document Server

    Requena, Juan Pablo Novillo

    2012-01-01

    A practical guide full of examples and step-by-step instructions to start using Drush right from chapter 1. Drupal developers or themers who understand Drupal administration's basic concepts. Drush can make building any kind of website quicker and easier, no matter if it is a development environment, beta, a simple blog or a complex system.

  20. CONSUME: users guide.

    Science.gov (United States)

    R.D. Ottmar; M.F. Burns; J.N. Hall; A.D. Hanson

    1993-01-01

    CONSUME is a user-friendly computer program designed for resource managers with some working knowledge of IBM-PC applications. The software predicts the amount of fuel consumption on logged units based on weather data, the amount and fuel moisture of fuels, and a number of other factors. Using these predictions, the resource manager can accurately determine when and...

  1. User's guide for ICE

    International Nuclear Information System (INIS)

    Fraley, S.K.

    1976-07-01

    ICE is a cross-section mixing code which will accept cross sections from an AMPX working library and produce mixed cross sections in the AMPX working library format, ANISN format, and the group-independent ANISN format. User input is in the free-form or fixed-form FIDO structure. The code is operable as a module in the AMPX system

  2. TEBASCO user's guide

    International Nuclear Information System (INIS)

    Pearlstein, L.D.; Kaiser, T.B.; LoDestro, L.; Maron, N.; Nevins, W.M.; Willmann, P.A.

    1983-01-01

    TEBASCO is a Tandem mirror Equilibrium and BAllooning Stability COde. TEBASCO allows you to compute tandem-mirror MHD equilibria and to analyze both the flute-averaged and ballooning-mode stability of these equilibria. This stability analysis is directed toward the computation of marginal stability boundaries. Users of TEBASCO require a binary output file from the EFFI code which describes the vacuum magnetic field. In making this EFFI file the user will have defined a system of units for lengths (e.g., meters) and magnetic field (e.g., Tesla). In TEBASCO, all magnetic field strengths are normalized to the vacuum center-cell midplane value, and times are defined in units of the time for an Alfven wave in this field to transit one EFFI unit of length

  3. UAL user guide.

    CERN Document Server

    Malitsky, N

    2003-01-01

    The Unified Accelerator Libraries (UAL) provide a modularized environment for applying diverse accelerator simulation codes. Development of UAL is strongly prejudiced toward1 importing existing codes rather than developing new ones. This guide provides instructions for using this environment. This includes instructions for acquiring and building the codes, then for launching and interpreting some of the examples included with the distribution. In some cases the examples are general enough to be applied to different accelerators by mimicking input files and input parameters. The intention is to provide just enough computer language discussion (C++ and Perl) to support the use and understanding of the examples and to help the reader gain a general understanding of the overall architecture. Otherwise the manual is ''documentation by example.'' Except for an appendix concerning maps, discussion of physics is limited to comments accompanying the numerous code examples. Importation of codes into UAL is an ongoing e...

  4. User`s guide to MIDAS

    Energy Technology Data Exchange (ETDEWEB)

    Tisue, S.A.; Williams, N.B.; Huber, C.C. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.; Chun, K.C. [Argonne National Lab., IL (United States). Environmental Assessment Div.

    1995-12-01

    Welcome to the MIDAS User`s Guide. This document describes the goals of the Munitions Items Disposition Action System (MIDAS) program and documents the MIDAS software. The main text first describes the equipment and software you need to run MIDAS and tells how to install and start it. It lists the contents of the database and explains how it is organized. Finally, it tells how to perform various functions, such as locating, entering, viewing, deleting, changing, transferring, and printing both textual and graphical data. Images of the actual computer screens accompany these explanations and guidelines. Appendix A contains a glossary of names for the various abbreviations, codes, and chemicals; Appendix B is a list of modem names; Appendix C provides a database dictionary and rules for entering data; and Appendix D describes procedures for troubleshooting problems associated with connecting to the MIDAS server and using MIDAS.

  5. UAL USER GUIDE.

    Energy Technology Data Exchange (ETDEWEB)

    MALITSKY,N.; TALMAN,R.

    2003-01-09

    The Unified Accelerator Libraries (UAL) provide a modularized environment for applying diverse accelerator simulation codes. Development of UAL is strongly prejudiced toward1 importing existing codes rather than developing new ones. This guide provides instructions for using this environment. This includes instructions for acquiring and building the codes, then for launching and interpreting some of the examples included with the distribution. In some cases the examples are general enough to be applied to different accelerators by mimicking input files and input parameters. The intention is to provide just enough computer language discussion (C++ and Perl) to support the use and understanding of the examples and to help the reader gain a general understanding of the overall architecture. Otherwise the manual is ''documentation by example.'' Except for an appendix concerning maps, discussion of physics is limited to comments accompanying the numerous code examples. Importation of codes into UAL is an ongoing enterprise and when a code is said to have been Imported it does not necessarily mean that all features are supported. Other than this, the original documentation remains applicable (and is not duplicated here.)

  6. UAL USER GUIDE

    International Nuclear Information System (INIS)

    MALITSKY, N.; TALMAN, R.

    2003-01-01

    The Unified Accelerator Libraries (UAL) provide a modularized environment for applying diverse accelerator simulation codes. Development of UAL is strongly prejudiced toward1 importing existing codes rather than developing new ones. This guide provides instructions for using this environment. This includes instructions for acquiring and building the codes, then for launching and interpreting some of the examples included with the distribution. In some cases the examples are general enough to be applied to different accelerators by mimicking input files and input parameters. The intention is to provide just enough computer language discussion (C++ and Perl) to support the use and understanding of the examples and to help the reader gain a general understanding of the overall architecture. Otherwise the manual is ''documentation by example.'' Except for an appendix concerning maps, discussion of physics is limited to comments accompanying the numerous code examples. Importation of codes into UAL is an ongoing enterprise and when a code is said to have been Imported it does not necessarily mean that all features are supported. Other than this, the original documentation remains applicable (and is not duplicated here.)

  7. Network user's guide

    International Nuclear Information System (INIS)

    McGrady, P.W.

    1994-12-01

    NETWORK is a FORTRAN code used to model process flow systems in the gaseous diffusion plants at Portsmouth, Ohio and Paducah, Kentucky, operated by the United States Enrichment Corporation. It can handle a wide range of components and several different types of controllers. NETWORK can be run in either a steady-state mode or a transient mode. In the transient mode many different types of perturbations may be modeled. It is currently being used to model taking a cell off-stream in a gaseous diffusion plant. A brief description of the code is given, and process equipment models and input data are discussed

  8. APEX user`s guide - (Argonne production, expansion, and exchange model for electrical systems), version 3.0

    Energy Technology Data Exchange (ETDEWEB)

    VanKuiken, J.C.; Veselka, T.D.; Guziel, K.A.; Blodgett, D.W.; Hamilton, S.; Kavicky, J.A.; Koritarov, V.S.; North, M.J.; Novickas, A.A.; Paprockas, K.R. [and others

    1994-11-01

    This report describes operating procedures and background documentation for the Argonne Production, Expansion, and Exchange Model for Electrical Systems (APEX). This modeling system was developed to provide the U.S. Department of Energy, Division of Fossil Energy, Office of Coal and Electricity with in-house capabilities for addressing policy options that affect electrical utilities. To meet this objective, Argonne National Laboratory developed a menu-driven programming package that enables the user to develop and conduct simulations of production costs, system reliability, spot market network flows, and optimal system capacity expansion. The APEX system consists of three basic simulation components, supported by various databases and data management software. The components include (1) the investigation of Costs and Reliability in Utility Systems (ICARUS) model, (2) the Spot Market Network (SMN) model, and (3) the Production and Capacity Expansion (PACE) model. The ICARUS model provides generating-unit-level production-cost and reliability simulations with explicit recognition of planned and unplanned outages. The SMN model addresses optimal network flows with recognition of marginal costs, wheeling charges, and transmission constraints. The PACE model determines long-term (e.g., longer than 10 years) capacity expansion schedules on the basis of candidate expansion technologies and load growth estimates. In addition, the Automated Data Assembly Package (ADAP) and case management features simplify user-input requirements. The ADAP, ICARUS, and SMN modules are described in detail. The PACE module is expected to be addressed in a future publication.

  9. SPORTS (version 1) user's guide

    International Nuclear Information System (INIS)

    Chatoorgoon, V.; Thibeault, P.R.

    1985-06-01

    SPORTS is a transient one-dimensional thermalhydraulic code formulated from the non-linear time dependent conservation equations and designed to investigate two-phase flow stability. The SPORTS Users' Guide contains some features of the code, a brief description of the program environment and access, and a description of the input data complete with a sample problem

  10. SILMUSCEN and CLIGEN User`s Guide

    Energy Technology Data Exchange (ETDEWEB)

    Carter, T.; Tuomenvirta, H. [Finnish Meteorological Inst., Helsinki (Finland); Posch, M. [Water and Environment Research Inst., Helsinki (Finland)

    1995-12-31

    This User`s Guide has been prepared to provide recommendations for the selection and application of climatic scenarios in the Finnish Research Programme on Climate Change (SILMU). These scenarios are required for conducting impact studies in SILMU. They should reflect the current range of estimates of future climate in the Finnish region. In addition, they should be consistent with other projections of importance in impact studies, such as future atmospheric composition and sea level. Section 2 provides some background information about the types of scenarios required in SILMU and Section 3 offers a general description of the scenarios. In Section 4 there is some advice on applying sensitivity studies to complement the use of scenarios. Section 5 explains the installation of the SILMUSCEN program and Section 6 guides the user through some examples to illustrate how SILMUSCEN can be used. Section 7 offers some recommendations on which scenarios to adopt for different impact assessments. In order to ensure some compatibility between impact studies in SILMU, it is very important that the recommendations in this section are followed as far as possible. Section 8 addresses important omissions from the computer program and suggests procedures to adopt in their absence. Section 9 explores alternative methods of specifying the baseline climate, and shows how scenario adjustments to the baseline can be made. in Section 10, the stochastic weather generator, CLIGEN, is described and its use illustrated by means of examples. Finally, possible refinements of the programs are outlined in Section 11, along with contact names and addresses for obtaining further information. (36 refs.)

  11. Paracousti User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Preston, Leiph A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Geophysics

    2016-09-01

    Paracousti is a parallelized acoustic wave propagation simulation package developed at Sandia National Laboratories. It solves the linearized coupled set of acousto-dynamic partial differential equations using finite-difference approximations that are second order accurate in time and fourth order accurate in space. Paracousti simulates sound wave propagation within realistic 3-D earth, static atmosphere and hydroacoustic models, including 3-D variations in medium densities and acoustic sound speeds and topography or bathymetry. It can also incorporate attenuative media such as would be expected from physical mechanisms such as molecular dissipation. This report explains the usage of the Paracousti algorithm.

  12. SharePoint User's Guide

    CERN Document Server

    Corporation, Infusion Development

    2009-01-01

    This straightforward guide shows SharePoint users how to create and use web sites for sharing and collaboration. Learn to use the document and picture libraries for adding and editing content, add discussion boards and surveys, receive alerts when documents and information have been added or changed, and enhance security. Designed to help you find answers quickly, the book shows how to make the most of SharePoint for productivity and collaboration.

  13. Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ``big picture`` and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a `` top down`` approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ``top down`` approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers.

  14. FACSIM/MRS (Monitored Retrievable Storage)-2: Storage and shipping model documentation and user's guide

    Energy Technology Data Exchange (ETDEWEB)

    Huber, H.D.; Chockie, A.D.; Hostick, C.J.; Otis, P.T.; Sovers, R.A.

    1987-06-01

    The Pacific Northwest Laboratory (PNL) has developed a stochastic computer model, FACSIM/MRS, to assist in assessing the operational performance of the Monitored Retrievable Storage (MRS) waste-handling facility. This report provides the documentation and user's guide for FACSIM/MRS-2, which is also referred to as the back-end model. The FACSIM/MRS-2 model simulates the MRS storage and shipping operations, which include handling canistered spent fuel and secondary waste in the shielded canyon cells, in onsite yard storage, and in repository shipping cask loading areas.

  15. LISA package user guide. Part III: SPOP (Statistical POst Processor). Uncertainty and sensitivity analysis for model output. Program description and user guide

    International Nuclear Information System (INIS)

    Saltelli, A.; Homma, T.

    1992-01-01

    This manual is subdivided into three parts. In the third part, the SPOP (Statistical POst Processor) code is described as a tool to perform Uncertainty and Sensitivity Analyses on the output of a User implemented model. It has been developed at the joint Research Centre of Ispra as part of the LISA package. SPOP performs Sensitivity Analysis (SA) and Uncertainty Analysis (UA) on a sample output from a Monte Carlo simulation. The sample is generated by the User and contains values of the output variable (in the form of a time series) and values of the input variables for a set of different simulations (runs), which are realised by varying the model input parameters. The User may generate the Monte Carlo sample with the PREP pre-processor, another module of the LISA package. The SPOP code is completely written in FORTRAN 77 using structured programming. Among the tasks performed by the code are the computation of Tchebycheff and Kolmogorov confidence bounds on the output variable (UA), and the use of effective non-parametric statistics to rank the influence of model input parameters (SA). The statistics employed are described in the present manual. 19 refs., 16 figs., 2 tabs. Note: This PART III is a revised version of the previous EUR report N.12700EN (1990)

  16. User's guide to the weather model: a component of the western spruce budworm modeling system.

    Science.gov (United States)

    W. P. Kemp; N. L. Crookston; P. W. Thomas

    1989-01-01

    A stochastic model useful in simulating daily maximum and minimum temperature and precipitation developed by Bruhn and others has been adapted for use in the western spruce budworm modeling system. This document describes how to use the weather model and illustrates some aspects of its behavior.

  17. SNAP Operating System (SOS) user's guide

    International Nuclear Information System (INIS)

    Sabuda, J.D.; Polito, J.; Walker, J.L.; Grant, F.H. III.

    1982-03-01

    The SNAP Operating System (SOS) is a FORTRAN 77 program which provides assistance to the safeguards analyst who uses the Safeguards Automated Facility Evaluation (SAFE) and the Safeguards Network Analysis Procedure (SNAP) techniques. Features offered by SOS are a data base system for storing a library of SNAP applications, computer graphics representation of SNAP models, a computer graphics editor to develop and modify SNAP models, a SAFE-to-SNAP interface, automatic generation of SNAP input data, and a computer graphics postprocessor for SNAP. The SOS User's Guide is designed to provide the user with the information necessary to use SOS effectively. Examples are used throughout to illustrate the concepts. The format of the user's guide follows the same sequence as would be used in executing an actual application

  18. EpiPOD : community vaccination and dispensing model user's guide.

    Energy Technology Data Exchange (ETDEWEB)

    Berry, M.; Samsa, M.; Walsh, D.; Decision and Information Sciences

    2009-01-09

    EpiPOD is a modeling system that enables local, regional, and county health departments to evaluate and refine their plans for mass distribution of antiviral and antibiotic medications and vaccines. An intuitive interface requires users to input as few or as many plan specifics as are available in order to simulate a mass treatment campaign. Behind the input interface, a system dynamics model simulates pharmaceutical supply logistics, hospital and first-responder personnel treatment, population arrival dynamics and treatment, and disease spread. When the simulation is complete, users have estimates of the number of illnesses in the population at large, the number of ill persons seeking treatment, and queuing and delays within the mass treatment system--all metrics by which the plan can be judged.

  19. Radon transport modelling: User's guide to RnMod3d

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, C.E

    2000-08-01

    RnMod3d is a numerical computer model of soil-gas and radon transport in porous media. It can be used, for example, to study radon entry from soil into houses in response to indoor-outdoor pressure differences or changes in atmospheric pressure. It can also be used for flux calculations of radon from the soil surface or to model radon exhalation from building materials such as concrete. The finite-volume model is a technical research tool, and it cannot be used meaningfully without good understanding of the involved physical equations. Some understanding of numerical mathematics and the programming language Pascal is also required. Originally, the code was developed for internal use at Risoe only. With this guide, however, it should be possible for others to use the model. Three-dimensional steady-state or transient problems with Darcy flow of soil gas and combined generation, radioactive decay, diffusion and advection of radon can be solved. Moisture is included in the model, and partitioning of radon between air, water and soil grains (adsorption) is taken into account. Most parameters can change in time and space, and transport parameters (diffusivity and permeability) may be anisotropic. This guide includes benchmark tests based on simple problems with known solutions. RnMod3d has also been part of an international model intercomparison exercise based on more complicated problems without known solutions. All tests show that RnMod3d gives results of good quality. (au)

  20. Radon transport modelling: User's guide to RnMod3d

    International Nuclear Information System (INIS)

    Andersen, C.E.

    2000-08-01

    RnMod3d is a numerical computer model of soil-gas and radon transport in porous media. It can be used, for example, to study radon entry from soil into houses in response to indoor-outdoor pressure differences or changes in atmospheric pressure. It can also be used for flux calculations of radon from the soil surface or to model radon exhalation from building materials such as concrete. The finite-volume model is a technical research tool, and it cannot be used meaningfully without good understanding of the involved physical equations. Some understanding of numerical mathematics and the programming language Pascal is also required. Originally, the code was developed for internal use at Risoe only. With this guide, however, it should be possible for others to use the model. Three-dimensional steady-state or transient problems with Darcy flow of soil gas and combined generation, radioactive decay, diffusion and advection of radon can be solved. Moisture is included in the model, and partitioning of radon between air, water and soil grains (adsorption) is taken into account. Most parameters can change in time and space, and transport parameters (diffusivity and permeability) may be anisotropic. This guide includes benchmark tests based on simple problems with known solutions. RnMod3d has also been part of an international model intercomparison exercise based on more complicated problems without known solutions. All tests show that RnMod3d gives results of good quality. (au)

  1. Integrating Model of the Project Independence Evaluation System. Volume III. User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, M.L.; Hutzler, M.J.

    1979-03-01

    Volume III of the six-volume series documenting the Integrating Model of PIES provides a potential PIES user with a description of how PIES operates with particular emphasis on the possible variations in assumptions and data that can be made in specifying alternative scenarios. PIES is described as it existed on January 1, 1978. The introductory chapter is followed by Section II, an overview of the structure and components of PIES. Section III discusses each of the PIES components in detail; describes the Demand Model; contains a description of the models, assumptions, and data which provide supply side inputs to the PIES Integrating Model; and concludes with a discussion of those aspects of PIES which extend the scope of the analysis beyond the national energy market. Section IV discusses two reports produced by the PIES Integrating Model: the PIES Integrating Model Report and the Coal Transportation Report. (MCW)

  2. Mars Global Reference Atmospheric Model 2000 Version (Mars-GRAM 2000): Users Guide

    Science.gov (United States)

    Justus, C. G.; James, B. F.

    2000-01-01

    This report presents Mars Global Reference Atmospheric Model 2000 Version (Mars-GRAM 2000) and its new features. All parameterizations for temperature, pressure, density, and winds versus height, latitude, longitude, time of day, and L(sub s) have been replaced by input data tables from NASA Ames Mars General Circulation Model (MGCM) for the surface through 80-km altitude and the University of Arizona Mars Thermospheric General Circulation Model (MTGCM) for 80 to 170 km. A modified Stewart thermospheric model is still used for higher altitudes and for dependence on solar activity. "Climate factors" to tune for agreement with GCM data are no longer needed. Adjustment of exospheric temperature is still an option. Consistent with observations from Mars Global Surveyor, a new longitude-dependent wave model is included with user input to specify waves having 1 to 3 wavelengths around the planet. A simplified perturbation model has been substituted for the earlier one. An input switch allows users to select either East or West longitude positive. This memorandum includes instructions on obtaining Mars-GRAM source code and data files and for running the program. It also provides sample input and output and an example for incorporating Mars-GRAM as an atmospheric subroutine in a trajectory code.

  3. Radon transport modelling: User's guide to RnMod3d

    DEFF Research Database (Denmark)

    Andersen, Claus Erik

    2000-01-01

    decay, diffusion and advection of radon can be solved. Moisture is included in the model, and partitioning ofradon between air, water and soil grains (adsorption) is taken into account. Most parameters can change in time and space, and transport parameters (diffusivity and permeability) may......RnMod3d is a numerical computer model of soil-gas and radon transport in porous media. It can be used, for example, to study radon entry from soil into houses in response to indoor-outdoor pressure differences or changes in atmospheric pressure. It canalso be used for flux calculations of radon...... be anisotropic. This guide includes benchmark tests based on simpleproblems with known solutions. RnMod3d has also been part of an international model intercomparison exercise based on more complicated problems without known solutions. All tests show that RnMod3d gives results of good quality....

  4. Technical documentation and user's guide for City-County Allocation Model (CCAM). Version 1.0

    International Nuclear Information System (INIS)

    Clark, L.T. Jr.; Scott, M.J.; Hammer, P.

    1986-05-01

    The City-County Allocation Model (CCAM) was developed as part of the Monitored Retrievable Storage (MRS) Program. The CCAM model was designed to allocate population changes forecasted by the MASTER model to specific local communities within commuting distance of the MRS facility. The CCAM model was designed to then forecast the potential changes in demand for key community services such as housing, police protection, and utilities for these communities. The CCAM model uses a flexible on-line data base on demand for community services that is based on a combination of local service levels and state and national service standards. The CCAM model can be used to quickly forecast the potential community service consequence of economic development for local communities anywhere in the country. The remainder of this document is organized as follows. The purpose of this manual is to assist the user in understanding and operating the City-County Allocation Model (CCAM). The annual explains the data sources for the model and code modifications as well as the operational procedures

  5. SAGE 2.1: SOLVENT ALTERNATIVES GUIDE: USER'S GUIDE

    Science.gov (United States)

    The guide provides instruction for using the SAGE (Solvent Alternatives GuidE) software system, version 2.1. SAGE recommends solvent replacements in cleaning and degreasing operations. It leads the user through a question-and-answer session. The user's responses allow the system ...

  6. Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user's guide

    International Nuclear Information System (INIS)

    1995-11-01

    This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ''big picture'' and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a '' top down'' approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ''top down'' approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers

  7. MicroPRIS user's guide

    International Nuclear Information System (INIS)

    1991-01-01

    MicroPRIS is a new service of the IAEA Power Reactor Information System (PRIS) for the Member States of IAEA. MicroPRIS makes the IAEA database on nuclear power plants and their operating experience available to Member States on computer diskettes in a form readily accessible by standard commercially available personal computer packages. The aim of this publication is to provide the users of the PC version of PRIS data with description of the subset of the full PRIS database contained in MicroPRIS (release 1990), description of files and file structures, field descriptions and definitions, extraction and selection guide and with the method of calculation of a number of important performance indicators used by the IAEA

  8. User's guide for GSMP, a General System Modeling Program. [In PL/I

    Energy Technology Data Exchange (ETDEWEB)

    Cook, J. M.

    1979-10-01

    GSMP is designed for use by systems analysis teams. Given compiled subroutines that model the behavior of components plus instructions as to how they are to be interconnected, this program links them together to model a complete system. GSMP offers a fast response to management requests for reconfigurations of old systems and even initial configurations of new systems. Standard system-analytic services are provided: parameter sweeps, graphics, free-form input and formatted output, file storage and recovery, user-tested error diagnostics, component model and integration checkout and debugging facilities, sensitivity analysis, and a multimethod optimizer with nonlinear constraint handling capability. Steady-state or cyclic time-dependence is simulated directly, initial-value problems only indirectly. The code is written in PL/I, but interfaces well with FORTRAN component models. Over the last five years GSMP has been used to model theta-pinch, tokamak, and heavy-ion fusion power plants, open- and closed-cycle magneto-hydrodynamic power plants, and total community energy systems.

  9. SILMUSCEN and CLIGEN User's Guide

    International Nuclear Information System (INIS)

    Carter, T.; Tuomenvirta, H.; Posch, M.

    1995-01-01

    This User's Guide has been prepared to provide recommendations for the selection and application of climatic scenarios in the Finnish Research Programme on Climate Change (SILMU). These scenarios are required for conducting impact studies in SILMU. They should reflect the current range of estimates of future climate in the Finnish region. In addition, they should be consistent with other projections of importance in impact studies, such as future atmospheric composition and sea level. Section 2 provides some background information about the types of scenarios required in SILMU and Section 3 offers a general description of the scenarios. In Section 4 there is some advice on applying sensitivity studies to complement the use of scenarios. Section 5 explains the installation of the SILMUSCEN program and Section 6 guides the user through some examples to illustrate how SILMUSCEN can be used. Section 7 offers some recommendations on which scenarios to adopt for different impact assessments. In order to ensure some compatibility between impact studies in SILMU, it is very important that the recommendations in this section are followed as far as possible. Section 8 addresses important omissions from the computer program and suggests procedures to adopt in their absence. Section 9 explores alternative methods of specifying the baseline climate, and shows how scenario adjustments to the baseline can be made. in Section 10, the stochastic weather generator, CLIGEN, is described and its use illustrated by means of examples. Finally, possible refinements of the programs are outlined in Section 11, along with contact names and addresses for obtaining further information. (36 refs.)

  10. Pandora technical description and user guide

    Energy Technology Data Exchange (ETDEWEB)

    Astrand, P.-G.; Breed, R. [Facilia AB, Bromma (Sweden); Jones, J. [Svensk Karnbranslehantering AB, Stockholm (Finland)

    2005-11-15

    Pandora is an extension of the well-known technical computing and simulation software MATLAB and Simulink of The Mathworks Inc. Pandora was developed to simplify development of models resulting in large systems of differential equations where decay of radionuclides is included in the model and to enhance the graphical user interface to be more suitable for radioecological modelling. MATLAB is a programming language and a computing environment. It provides core mathematics and advanced graphical tools for data analysis, visualisation, application development etc. Simulink is mainly targeted at modelling and simulating dynamic systems. Simulink provides a block diagram interface for MATLAB. Pandora facilitates effective use of them for radionuclide transport modelling. In the report the technical solutions of Pandora are outlined through a presentation of the key elements and a step-by-step sample case serving also as a user guide. (orig.)

  11. Pandora technical description and user guide

    International Nuclear Information System (INIS)

    Astrand, P.-G.; Breed, R.; Jones, J.

    2005-11-01

    Pandora is an extension of the well-known technical computing and simulation software MATLAB and Simulink of The Mathworks Inc. Pandora was developed to simplify development of models resulting in large systems of differential equations where decay of radionuclides is included in the model and to enhance the graphical user interface to be more suitable for radioecological modelling. MATLAB is a programming language and a computing environment. It provides core mathematics and advanced graphical tools for data analysis, visualisation, application development etc. Simulink is mainly targeted at modelling and simulating dynamic systems. Simulink provides a block diagram interface for MATLAB. Pandora facilitates effective use of them for radionuclide transport modelling. In the report the technical solutions of Pandora are outlined through a presentation of the key elements and a step-by-step sample case serving also as a user guide. (orig.)

  12. WELCST: engineering cost model of geothermal wells. Description and user's guide

    Energy Technology Data Exchange (ETDEWEB)

    Entingh, D.J.; Lopez, A.

    1979-02-01

    WELCST, a FORTRAN code for estimating the effects of R and D project results upon the future cost of geothermal wells is described. The code simulates the drilling and completion of a well at 27 specific US geothermal prospects, given assumptions about well design and casing plan, formation drillability, and selected engineering and cost characteristics of today's drilling technology. The user may change many of the assumptions about engineering and cost characteristics to allow WELCST to simulate impacts of specific R and D projects on the estimated cost of wells at the prospects. An important capability of WELCST is that it simulates rates and costs of major drilling mishaps, based on drilling incident data from the Imperial Valley and Geysers geothermal fields. WELCST is capable of estimating geothermal well costs at liquid-dominated (hydrothermal) sites, vapor-dominated sites, geopressured sites, and Hot Dry Rock sites. The model can contribute to many system-optimization studies, and could be easily adapted to estimate well costs outside of the United States.

  13. A user's manual to the PMBOK guide

    CERN Document Server

    Stackpole Snyder, Cynthia

    2013-01-01

    The must-have manual to understand and use the latest edition of the Fifth Edition The professional standard in the field of project management, A Guide to the Project Management Body of Knowledge (PMBOK® Guide-Fifth Edition) published by the Project Management Institute (PMI) serves as the ultimate resource for professionals and as a valuable studying and training device for students taking the PMP® Exam. A User''s Manual to the PMBOK® Guide takes the next logical step to act as a true user''s manual. With an accessible format and easy-to-understand language, it helps to not only distill es

  14. User's guide to the biosphere code ECOS

    International Nuclear Information System (INIS)

    Kane, P.; Thorne, M.C.

    1984-10-01

    This report constitutes the user's guide to the biosphere model ECOS and provides a detailed description of the processes modelled and mathematical formulations used. The FORTRAN code ECOS is an equilibrium-type compartmental biosphere code. ECOS was designed with the objective of producing a general but comprehensive code for use in the assessment of the radiological impact of unspecified geological repositories for radioactive waste. ECOS transforms the rate of release of activity from the geosphere to the rate of accumulation of weighted committed effective dose equivalent (dose). Both maximum individual dose (critical group dose) and collective dose rates may be computed. (author)

  15. Grammar-Guided Writing for AAC Users

    Science.gov (United States)

    Hunnicutt, Sheri; Magnuson, Tina

    2007-01-01

    A method of grammar-guided writing has been devised to guide graphic sign users through the construction of text messages for use in e-mail and other applications with a remote receiver. The purpose is to promote morphologically and syntactically correct sentences. The available grammatical structures in grammar-guided writing are the highest…

  16. A Functional Approach to User Guides

    DEFF Research Database (Denmark)

    Nielsen, Sandro

    2007-01-01

    draw the user's attention to the different types of use-situations in which the dictionary can help him. When the dictionary functions have been established and the relevant user group has been profiled, the lexicographers will have an excellent basis on which to select the types of information needed...... on lexicography and lexicographic products is the writing of a really crafted and valuable user guide for instance by giving increased consideration to the user perspective. This involves the identification of the functions of the dictionary in terms of communication-oriented and cognitive functions, which helps...... to fulfil the requirements of users. By applying the functional approach lexicographers are forced to reconsider the scope of the user guide. The user guide has traditionally centred on the structures of entries - and consequently on the word list - but its scope should be widened, so as to include all...

  17. EAACI Molecular Allergology User's Guide.

    Science.gov (United States)

    Matricardi, P M; Kleine-Tebbe, J; Hoffmann, H J; Valenta, R; Hilger, C; Hofmaier, S; Aalberse, R C; Agache, I; Asero, R; Ballmer-Weber, B; Barber, D; Beyer, K; Biedermann, T; Bilò, M B; Blank, S; Bohle, B; Bosshard, P P; Breiteneder, H; Brough, H A; Caraballo, L; Caubet, J C; Crameri, R; Davies, J M; Douladiris, N; Ebisawa, M; EIgenmann, P A; Fernandez-Rivas, M; Ferreira, F; Gadermaier, G; Glatz, M; Hamilton, R G; Hawranek, T; Hellings, P; Hoffmann-Sommergruber, K; Jakob, T; Jappe, U; Jutel, M; Kamath, S D; Knol, E F; Korosec, P; Kuehn, A; Lack, G; Lopata, A L; Mäkelä, M; Morisset, M; Niederberger, V; Nowak-Węgrzyn, A H; Papadopoulos, N G; Pastorello, E A; Pauli, G; Platts-Mills, T; Posa, D; Poulsen, L K; Raulf, M; Sastre, J; Scala, E; Schmid, J M; Schmid-Grendelmeier, P; van Hage, M; van Ree, R; Vieths, S; Weber, R; Wickman, M; Muraro, A; Ollert, M

    2016-05-01

    The availability of allergen molecules ('components') from several protein families has advanced our understanding of immunoglobulin E (IgE)-mediated responses and enabled 'component-resolved diagnosis' (CRD). The European Academy of Allergy and Clinical Immunology (EAACI) Molecular Allergology User's Guide (MAUG) provides comprehensive information on important allergens and describes the diagnostic options using CRD. Part A of the EAACI MAUG introduces allergen molecules, families, composition of extracts, databases, and diagnostic IgE, skin, and basophil tests. Singleplex and multiplex IgE assays with components improve both sensitivity for low-abundance allergens and analytical specificity; IgE to individual allergens can yield information on clinical risks and distinguish cross-reactivity from true primary sensitization. Part B discusses the clinical and molecular aspects of IgE-mediated allergies to foods (including nuts, seeds, legumes, fruits, vegetables, cereal grains, milk, egg, meat, fish, and shellfish), inhalants (pollen, mold spores, mites, and animal dander), and Hymenoptera venom. Diagnostic algorithms and short case histories provide useful information for the clinical workup of allergic individuals targeted for CRD. Part C covers protein families containing ubiquitous, highly cross-reactive panallergens from plant (lipid transfer proteins, polcalcins, PR-10, profilins) and animal sources (lipocalins, parvalbumins, serum albumins, tropomyosins) and explains their diagnostic and clinical utility. Part D lists 100 important allergen molecules. In conclusion, IgE-mediated reactions and allergic diseases, including allergic rhinoconjunctivitis, asthma, food reactions, and insect sting reactions, are discussed from a novel molecular perspective. The EAACI MAUG documents the rapid progression of molecular allergology from basic research to its integration into clinical practice, a quantum leap in the management of allergic patients. © 2016 John Wiley

  18. FLOWTRAN-TF user guide

    Energy Technology Data Exchange (ETDEWEB)

    Flach, G.P.; Lee, S.Y.; Aleman, S.E.

    1993-02-01

    This document is a set of detailed instructions and guidelines to aid users in constructing and interpreting FLOWTRAN-TF input and output files for version 1.2 of the source code. The document assumes the user is familiar with the FLOWTRAN-TF Software Design report, SRS fuel assembly hardware, and two-phase flow. General code capabilities and input options are summarized. Then, detailed instructions for creating and interpreting code input files are given next. A sample input deck and corresponding output files are listed for reference and illustration. FLOWTRAN-TF is a two-phase thermal-hydraulics code of similar technology to existing commercial reactor codes such as RELAP and TRAC but customized for Savannah River Site applications. The code may be used to simulate solid components, fluid coolant flow and solid-fluid heat transfer, or fluid flow only (adiabatic flow channels). Pure component water or two-component air-water flows may be modeled. A variety of materials may be chosen for the solid tubes separating flow channels. FLOWTRAN-TF is fundamentally a transient analysis tool.

  19. Disk Operating System User's Guide

    Science.gov (United States)

    1972-05-01

    This document serves the purpose of bringing together in one place most of the information a user needs to use the DDP-516 Disk Operating System, (DOS). DOS is a core resident, one user, console-oriented operating system which allows the user to cont...

  20. RADTRAN 4: User guide. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    Neuhauser, K S [Sandia National Labs., Albuquerque, NM (United States); Kanipe, F L [GRAM, Inc., Albuquerque, NM (United States)

    1992-01-01

    RADTRAN 4 is used to evaluate radiological consequences of incident-free transportation, as well as the radiological risks from vehicular accidents occurring during transportation. This User Guide is Volume 3 in a series of four volume of the documentation of the RADTRAN 4 computer code for transportation risk analysis. The other three volumes are Volume 1, the Executive Summary; Volume 2, the Technical Manual; and Volume 4, the Programmer`s Manual. The theoretical and calculational basis for the operations performed by RADTRAN 4 are discussed in Volume 2. Throughout this User Guide the reader will be referred to Volume 2 for detailed discussions of certain RADTRAN features. This User Guide supersedes the document ``RADTRAN III`` by Madsen et al. (1983). This RADTRAN 4 User Guide specifies and describes the required data, control inputs, input sequences, user options, program limitations, and other activities necessary for execution of the RADTRAN 4 computer code.

  1. A user's guide for the program NAMMU

    International Nuclear Information System (INIS)

    Rae, J.; Robinson, P.C.; Wickens, L.M.

    1981-06-01

    The computer program NAMMU was written to model heat and groundwater flow problems arising from underground disposal of high-level radioactive waste. At present the program handles two-dimensional time-dependent flow in permeable rock. A general description of NAMMU and the first attempts at validating the code have already been published. Since then it has begun to be applied to flows in real geological regions and it is clear that some form of user's guide has become necessary. The program will certainly undergo further extensions and modifications so this guide will not necessarily cover all aspects of later versions. The code for NAMMU is built on a very general and flexible library of finite-element subprograms written at Harwell over several years. This flexibility, and the fact that many transport problems can be expressed in substantially the same mathematical form has led already to close relatives of NAMMU being written for other transport problems. A recent example is the program MISCFLO which computes solute transport in a form appropriate to miscible displacement flow in oil reservoirs. The NAMMU user's guide applies equally to such close relatives. (author)

  2. A user's guide to the combined stand prognosis and Douglas-fir tussock moth outbreak model

    Science.gov (United States)

    Robert A. Monserud; Nicholas L. Crookston

    1982-01-01

    Documentation is given for using a simulation model combining the Stand Prognosis Model and the Douglas-fir Tussock Moth Outbreak Model. Four major areas are addressed: (1) an overview and discussion of the combined model; (2) description of input options; (3) discussion of model output, and (4) numerous examples illustrating model behavior and sensitivity.

  3. User's guide to the Yucca Mountain Integrating Model (YMIM) Version 2.1

    International Nuclear Information System (INIS)

    Gansemer, J.; Lamont, A.

    1995-04-01

    The Yucca Mountain Integrating Model (YMIM) is an integrated model of the engineered barrier system. It contains models of the processes of waste container failure and nuclide release from the fuel rods. YMIM is driven by scenarios of container and rod temperature, near-field chemistry, and near-field hydrology provided by other modules. It is designed to be highly modular so that a model of an individual process can be easily modified to replaced without interfering with the models of other processes. This manual describes the process models and provides instructions for setting up and running YMIM Version 2.1

  4. SPRAYTRAN USER'S GUIDE: A GIS-BASED ATMOSPHERIC SPRAY DROPLET DISPERSION MODELING SYSTEM

    Science.gov (United States)

    The offsite drift of pesticide from spray operations is an ongoing source of concern. The SPRAY TRANsport (SPRAYTRAN) system, documented in this report, incorporates the near-field spray application model, AGDISP, into a meso-scale atmospheric transport model. The AGDISP model ...

  5. VOLTTRON 3.0: User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Lutes, Robert G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Haack, Jereme N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Katipamula, Srinivas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Monson, Kyle E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Akyol, Bora A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carpenter, Brandon J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-11-30

    This document is a user guide for the deployment of the transactional network platform and agent/application development within VOLTTRON. The intent of this user guide is to provide a description of the functionality of the transactional network platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

  6. VOLTTRON 2.0: User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Lutes, Robert G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Haack, Jereme N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Katipamula, Srinivas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Monson, Kyle E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Akyol, Bora A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carpenter, Brandon J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tenney, Nathan D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-11-30

    This document is a user guide for the deployment of the transactional network platform and agent/application development within VOLTTRON. The intent of this user guide is to provide a description of the functionality of the transactional network platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

  7. ETARA PC version 3.3 user's guide: Reliability, availability, maintainability simulation model

    Science.gov (United States)

    Hoffman, David J.; Viterna, Larry A.

    1991-01-01

    A user's manual describing an interactive, menu-driven, personal computer based Monte Carlo reliability, availability, and maintainability simulation program called event time availability reliability (ETARA) is discussed. Given a reliability block diagram representation of a system, ETARA simulates the behavior of the system over a specified period of time using Monte Carlo methods to generate block failure and repair intervals as a function of exponential and/or Weibull distributions. Availability parameters such as equivalent availability, state availability (percentage of time as a particular output state capability), continuous state duration and number of state occurrences can be calculated. Initial spares allotment and spares replenishment on a resupply cycle can be simulated. The number of block failures are tabulated both individually and by block type, as well as total downtime, repair time, and time waiting for spares. Also, maintenance man-hours per year and system reliability, with or without repair, at or above a particular output capability can be calculated over a cumulative period of time or at specific points in time.

  8. First Order Fire Effects Model: FOFEM 4.0, user's guide

    Science.gov (United States)

    Elizabeth D. Reinhardt; Robert E. Keane; James K. Brown

    1997-01-01

    A First Order Fire Effects Model (FOFEM) was developed to predict the direct consequences of prescribed fire and wildfire. FOFEM computes duff and woody fuel consumption, smoke production, and fire-caused tree mortality for most forest and rangeland types in the United States. The model is available as a computer program for PC or Data General computer.

  9. Hydrogen Macro System Model User Guide, Version 1.2.1

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, M.; Diakov, V.; Sa, T.; Goldsby, M.; Genung, K.; Hoseley, R.; Smith, A.; Yuzugullu, E.

    2009-07-01

    The Hydrogen Macro System Model (MSM) is a simulation tool that links existing and emerging hydrogen-related models to perform rapid, cross-cutting analysis. It allows analysis of the economics, primary energy-source requirements, and emissions of hydrogen production and delivery pathways.

  10. National Center for Electron Microscopy users' guide

    International Nuclear Information System (INIS)

    1987-01-01

    The National Center for Electron Microscopy (NCEM) in the Materials and Molecular Research Division of the Lawrence Berkeley Laboratory is a high voltage electron microscope facility for ultra-high resolution or dynamic in-situ studies. This guide describes the instruments and their specifications, support instrumentation, and user policies. Advice as to travel and accommodations is provided in the guide. (FI)

  11. National Ignition Facility User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Keane, C J [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-09-03

    This user manual is intended to provide sufficient information to allow researchers to become familiar with NIF and develop preliminary plans for NIF experiments. It also provides references to further detail that will allow detailed experiment planning.

  12. EBT time-dependent point model code: description and user's guide

    International Nuclear Information System (INIS)

    Roberts, J.F.; Uckan, N.A.

    1977-07-01

    A D-T time-dependent point model has been developed to assess the energy balance in an EBT reactor plasma. Flexibility is retained in the model to permit more recent data to be incorporated as they become available from the theoretical and experimental studies. This report includes the physics models involved, the program logic, and a description of the variables and routines used. All the files necessary for execution are listed, and the code, including a post-execution plotting routine, is discussed

  13. Integrated Mode Choice, Small Aircraft Demand, and Airport Operations Model User's Guide

    Science.gov (United States)

    Yackovetsky, Robert E. (Technical Monitor); Dollyhigh, Samuel M.

    2004-01-01

    A mode choice model that generates on-demand air travel forecasts at a set of GA airports based on changes in economic characteristics, vehicle performance characteristics such as speed and cost, and demographic trends has been integrated with a model to generate itinerate aircraft operations by airplane category at a set of 3227 airports. Numerous intermediate outputs can be generated, such as the number of additional trips diverted from automobiles and schedule air by the improved performance and cost of on-demand air vehicles. The total number of transported passenger miles that are diverted is also available. From these results the number of new aircraft to service the increased demand can be calculated. Output from the models discussed is in the format to generate the origin and destination traffic flow between the 3227 airports based on solutions to a gravity model.

  14. User Guide for GoldSim Model to Calculate PA/CA Doses and Limits

    International Nuclear Information System (INIS)

    Smith, F.

    2016-01-01

    A model to calculate doses for solid waste disposal at the Savannah River Site (SRS) and corresponding disposal limits has been developed using the GoldSim commercial software. The model implements the dose calculations documented in SRNL-STI-2015-00056, Rev. 0 ''Dose Calculation Methodology and Data for Solid Waste Performance Assessment (PA) and Composite Analysis (CA) at the Savannah River Site''.

  15. China Macroeconomic Model. Specification Report, User’s Guide, Scenario Report, Trade Data Sources Report.

    Science.gov (United States)

    1984-11-01

    printing the results of all the modeling spreadsheets. It is configured to run on an Epson MX-80 or compatible printer . To run PRINT... or any of the...output commands in 0 each of the macros. These control codes are for generating compressed mode printing with Epson printers , allowing the model tables to...natural fiber textiles become a less important part of consumer manufactures, the-- coefficient of agricultural raw materials into consumer manufactures

  16. User Guide for GoldSim Model to Calculate PA/CA Doses and Limits

    Energy Technology Data Exchange (ETDEWEB)

    Smith, F. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-10-31

    A model to calculate doses for solid waste disposal at the Savannah River Site (SRS) and corresponding disposal limits has been developed using the GoldSim commercial software. The model implements the dose calculations documented in SRNL-STI-2015-00056, Rev. 0 “Dose Calculation Methodology and Data for Solid Waste Performance Assessment (PA) and Composite Analysis (CA) at the Savannah River Site”.

  17. User's guide to Model Viewer, a program for three-dimensional visualization of ground-water model results

    Science.gov (United States)

    Hsieh, Paul A.; Winston, Richard B.

    2002-01-01

    Model Viewer is a computer program that displays the results of three-dimensional groundwater models. Scalar data (such as hydraulic head or solute concentration) may be displayed as a solid or a set of isosurfaces, using a red-to-blue color spectrum to represent a range of scalar values. Vector data (such as velocity or specific discharge) are represented by lines oriented to the vector direction and scaled to the vector magnitude. Model Viewer can also display pathlines, cells or nodes that represent model features such as streams and wells, and auxiliary graphic objects such as grid lines and coordinate axes. Users may crop the model grid in different orientations to examine the interior structure of the data. For transient simulations, Model Viewer can animate the time evolution of the simulated quantities. The current version (1.0) of Model Viewer runs on Microsoft Windows 95, 98, NT and 2000 operating systems, and supports the following models: MODFLOW-2000, MODFLOW-2000 with the Ground-Water Transport Process, MODFLOW-96, MOC3D (Version 3.5), MODPATH, MT3DMS, and SUTRA (Version 2D3D.1). Model Viewer is designed to directly read input and output files from these models, thus minimizing the need for additional postprocessing. This report provides an overview of Model Viewer. Complete instructions on how to use the software are provided in the on-line help pages.

  18. PARFUME User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Kurt Hamman

    2010-09-01

    PARFUME, a fuel performance analysis and modeling code, is being developed at the Idaho National Laboratory for evaluating gas reactor coated particle fuel assemblies for prismatic, pebble bed, and plate type fuel geometries. The code is an integrated mechanistic analysis tool that evaluates the thermal, mechanical, and physico-chemical behavior of coated fuel particles (TRISO) and the probability for fuel failure given the particle-to-particle statistical variations in physical dimensions and material properties that arise during the fuel fabrication process. Using a robust finite difference numerical scheme, PARFUME is capable of performing steady state and transient heat transfer and fission product diffusion analyses for the fuel. Written in FORTRAN 90, PARFUME is easy to read, maintain, and modify. Currently, PARFUME is supported only on MS Windows platforms. This document represents the initial version of the PARFUME User Guide, a supplement to the PARFUME Theory and Model Basis Report which describes the theoretical aspects of the code. User information is provided including: 1) code development, 2) capabilities and limitations, 3) installation and execution, 4) user input and output, 5) sample problems, and 6) error messages. In the near future, the INL plans to release a fully benchmarked and validated beta version of PARFUME.

  19. Modeling user navigation

    NARCIS (Netherlands)

    Herder, E.; Brusilovsky, Peter; Corbett, Albert; de Rosis, Fiorella

    2003-01-01

    For providing users with navigation aids that best serve their needs, user models for adaptive hypermedia should include user navigation patterns. This paper describes elements needed and how these elements can be gathered.

  20. Mars Global Reference Atmospheric Model (Mars-GRAM) Version 3.8: Users Guide

    Science.gov (United States)

    Justus, C. G.; James, B. F.

    1999-01-01

    Mars Global Reference Atmospheric Model (Mars-GRAM) Version 3.8 is presented and its new features are discussed. Mars-GRAM uses new values of planetary reference ellipsoid radii, gravity term, and rotation rate (consistent with current JPL values) and includes centrifugal effects on gravity. The model now uses NASA Ames Global Circulation Model low resolution topography. Curvature corrections are applied to winds and limits based on speed of sound are applied. Altitude of the F1 ionization peak and density scale height, including effects of change of molecular weight with altitude are computed. A check is performed to disallow temperatures below CO2 sublimination. This memorandum includes instructions on obtaining Mars-GRAM source code and data files and running the program. Sample input and output are provided. An example of incorporating Mars-GRAM as an atmospheric subroutine in a trajectory code is also given.

  1. Users' guide to system dynamics model describing Coho salmon survival in Olema Creek, Point Reyes National Seashore, Marin County, California

    Science.gov (United States)

    Woodward, Andrea; Torregrosa, Alicia; Madej, Mary Ann; Reichmuth, Michael; Fong, Darren

    2014-01-01

    starting point, for other watersheds. This report describes each of the model elements with sufficient detail to guide the primary target audience, the NPS resource specialist, to run the model, interpret the results, change the input data to explore hypotheses, and ultimately modify and improve the model. Running the model and interpreting the results does not require modeling expertise on the part of the user. Additional companion publications will highlight other aspects of the model, such as its development, the rationale behind the methodological approach, scenario testing, and discussions of its use. System dynamics models consist of three basic elements: stocks, flows, and converters. Stocks are measurable quantities that can change over time, such as animal populations. Flows are any processes or conditions that change the quantity in a stock over time (Ford, 1999), are expressed in the model as a rate of change, and are diagrammed as arrows to or from stocks. Converters are processes or conditions that change the rate of flows. A converter is connected to a flow with an arrow indicating that it alters the rate of change. Anything that influences the rate of change (such as different environmental conditions, other external factors, or feedbacks from other stocks or flows) is modeled as a converter. For example, the number of fish in a population is appropriately modeled as a stock. Mortality is modeled as a flow because it is a rate of change over time used to determine the number of fish in the population. The density-dependent effect on mortality is modeled as a converter because it influences the rate of morality. Together, the flow and converter change the number, or stock, of juvenile coho. The instructions embedded in the stocks, flows, converters, and the sequence in which they are linked are processed by the simulation software with each completed sequence composing a model run. At each modeled time step within the model run, the stock counts will go up

  2. LANDFILL GAS EMISSIONS MODEL (LANDGEM) VERSION 3.02 USER'S GUIDE

    Science.gov (United States)

    The Landfill Gas Emissions Model (LandGEM) is an automated estimation tool with a Microsoft Excel interface that can be used to estimate emission rates for total landfill gas, methane, carbon dioxide, nonmethane organic compounds, and individual air pollutants from municipal soli...

  3. SAGE 2.0 SOLVENT ALTERNATIVES GUIDE - USER'S GUIDE

    Science.gov (United States)

    The guide provides instruction for using the SAGE (Solvent Alternatives Guide) software system, version 2.O. It assumes that the user is familiar with the fundamentals of operating a personal computer under the Microsoft disk operating system (MS-DOS). AGE recommends solvent repl...

  4. Army Sustainability Modelling Analysis and Reporting Tool Phase 1: User Manual and Results Interpretation Guide

    Science.gov (United States)

    2009-11-01

    Force Sustainability Modelling Tool Prototype GB Gigabyte GRES General Reserve HQ Headquarters HTA Hardening the Army JOLTS Joint Operational...Hardening the Army ( HTA ) proposed force structure.1 Following this work, the Director General Preparedness and Plans – Army (DGPP-A) approached DSTO to...that the different elements of the results for the corps have been identified, we can turn our attention to what the results say about the

  5. Mars Global Reference Atmospheric Model 2001 Version (Mars-GRAM 2001): Users Guide

    Science.gov (United States)

    Justus, C. G.; Johnson, D. L.

    2001-01-01

    This document presents Mars Global Reference Atmospheric Model 2001 Version (Mars-GRAM 2001) and its new features. As with the previous version (mars-2000), all parameterizations fro temperature, pressure, density, and winds versus height, latitude, longitude, time of day, and season (Ls) use input data tables from NASA Ames Mars General Circulation Model (MGCM) for the surface through 80-km altitude and the University of Arizona Mars Thermospheric General Circulation Model (MTGCM) for 80 to 70 km. Mars-GRAM 2001 is based on topography from the Mars Orbiter Laser Altimeter (MOLA) and includes new MGCM data at the topographic surface. A new auxiliary program allows Mars-GRAM output to be used to compute shortwave (solar) and longwave (thermal) radiation at the surface and top of atmosphere. This memorandum includes instructions on obtaining Mars-GRAN source code and data files and for running the program. It also provides sample input and output and an example for incorporating Mars-GRAM as an atmospheric subroutine in a trajectory code.

  6. User guide for MODPATH version 6 - A particle-tracking model for MODFLOW

    Science.gov (United States)

    Pollock, David W.

    2012-01-01

    MODPATH is a particle-tracking post-processing model that computes three-dimensional flow paths using output from groundwater flow simulations based on MODFLOW, the U.S. Geological Survey (USGS) finite-difference groundwater flow model. This report documents MODPATH version 6. Previous versions were documented in USGS Open-File Reports 89-381 and 94-464. The program uses a semianalytical particle-tracking scheme that allows an analytical expression of a particle's flow path to be obtained within each finite-difference grid cell. A particle's path is computed by tracking the particle from one cell to the next until it reaches a boundary, an internal sink/source, or satisfies another termination criterion. Data input to MODPATH consists of a combination of MODFLOW input data files, MODFLOW head and flow output files, and other input files specific to MODPATH. Output from MODPATH consists of several output files, including a number of particle coordinate output files intended to serve as input data for other programs that process, analyze, and display the results in various ways. MODPATH is written in FORTRAN and can be compiled by any FORTRAN compiler that fully supports FORTRAN-2003 or by most commercially available FORTRAN-95 compilers that support the major FORTRAN-2003 language extensions.

  7. GELCOM: a geothermal levelized busbar cost model. Description and user's guide

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, J.N.; Leigh, J.G.

    1978-01-01

    The model described is designed to project the costs of electricity generated from liquid dominated hydrothermal resources. It is presented in the form of an interactive computer program called GELCOM, written in Fortran IV, together with an analytic explanation of the methodology. GELCOM starts from resource data and estimates the capital and operating costs for the production field and electrical generating plant. The methodology implemented in GELCOM to determine the engineering cost, operating parameter estimates, and the levelized busbar cost is described. The output displayed by GELCOM for one prospect is explained. The input data files maintained in the computer system and the input data card formats are included. A sample session with GELCOM and the economic reports which may be generated from the GELCOM are illustrated. A completed listing of the computer program is given in an appendix. (MHR)

  8. Solid Waste Projection Model: Database user's guide (Version 1.3)

    International Nuclear Information System (INIS)

    Blackburn, C.L.

    1991-11-01

    The Solid Waste Projection Model (SWPM) system is an analytical tool developed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford Company (WHC) specifically to address Hanford solid waste management issues. This document is one of a set of documents supporting the SWPM system and providing instructions in the use and maintenance of SWPM components. This manual contains instructions for preparing to use Version 1.3 of the SWPM database, for entering and maintaining data, and for performing routine database functions. This document supports only those operations which are specific to SWPM database menus and functions and does not provide instruction in the use of Paradox, the database management system in which the SWPM database is established

  9. User's guide to the MESOI diffusion model and to the utility programs UPDATE and LOGRVU

    Energy Technology Data Exchange (ETDEWEB)

    Athey, G.F.; Allwine, K.J.; Ramsdell, J.V.

    1981-11-01

    MESOI is an interactive, Lagrangian puff trajectory diffusion model. The model is documented separately (Ramsdell and Athey, 1981); this report is intended to provide MESOI users with the information needed to successfully conduct model simulations. The user is also provided with guidance in the use of the data file maintenance and review programs; UPDATE and LOGRVU. Complete examples are given for the operaton of all three programs and an appendix documents UPDATE and LOGRVU.

  10. ABCASH plotting program users guide

    International Nuclear Information System (INIS)

    Troyer, G.L.

    1995-01-01

    The Automated Bar Coding of Air Samples at Hanford (ABCASH) system provides an integrated data collection, sample tracking, and data reporting system for radioactive particulate air filter samples. The ABCASH plotting program provides a graphical trend report for ABCASH of the performance of air sample results. This document provides an operational guide for using the program. Based on sample location identifier and date range, a trend chart of the available data is generated. The trend chart shows radiological activity versus time. General indications of directional trend of the concentrations in air over time may be discerned. Comparison limit set point values are also shown as derived from the ABCASH data base

  11. A user's guide to ellipsometry

    CERN Document Server

    Tompkins, Harland G

    1992-01-01

    This book is specifically designed for the user who wishes expanded use of ellipsometry beyond the relatively limited number of turn-key applications. The book provides a concise discussion of theory and instrumentation before describing how to use optical parameters to determine material properties and optical parameters for inaccessible substrates and unknown films, and how to measure extremely thin films. The book also addresses polysilicon, a material commonly used in the microelectronics industry, and the effect of substrate roughness. This book's concepts and applications are reinforced

  12. NASA AVOSS Fast-Time Models for Aircraft Wake Prediction: User's Guide (APA3.8 and TDP2.1)

    Science.gov (United States)

    Ahmad, Nash'at N.; VanValkenburg, Randal L.; Pruis, Matthew J.; Limon Duparcmeur, Fanny M.

    2016-01-01

    NASA's current distribution of fast-time wake vortex decay and transport models includes APA (Version 3.8) and TDP (Version 2.1). This User's Guide provides detailed information on the model inputs, file formats, and model outputs. A brief description of the Memphis 1995, Dallas/Fort Worth 1997, and the Denver 2003 wake vortex datasets is given along with the evaluation of models. A detailed bibliography is provided which includes publications on model development, wake field experiment descriptions, and applications of the fast-time wake vortex models.

  13. Reactive Geochemical Transport Modeling of Concentrated AqueousSolutions: Supplement to TOUGHREACT User's Guide for the PitzerIon-Interaction Model

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Guoxiang; Spycher, Nicolas; Xu, Tianfu; Sonnenthal, Eric; Steefel , Carl

    2006-12-15

    In this report, we present: -- The Pitzer ion-interactiontheory and models -- Input file requirements for using the TOUGHREACTPitzer ion-interaction model and associated databases -- Run-time errormessages -- Verification test cases and application examples. For themain code structure, features, overall solution methods, description ofinput/output files for parameters other than those specific to theimplemented Pitzer model, and error messages, see the TOUGHREACT User'sGuide (Xu et al., 2005). The TOUGHREACT Pitzer version runs on aDEC-alpha architecture CPU, under OSF1 V5.1, with Compaq Digital FortranCompiler. The compiler run-time libraries are required for execution aswell as compilation. The code also runs on Intel Pentium IV andhigher-version CPU-based machines with Compaq Visual Fortran Compiler orIntel Fortran Compiler (integrated with the Microsoft DevelopmentEnvironment). The minimum hardware configuration should include 1 GB RAMand 1 GB (2 GB recommended) of available disk space.

  14. Airport Information Retrieval System (AIRS) User's Guide

    Science.gov (United States)

    1973-08-01

    The handbook is a user's guide for a prototype air traffic flow control automation system developed for the FAA's System Command Center. The system is implemented on a time-sharing computer and is designed to provide airport traffic load predictions ...

  15. Screening and Evaluation Tool (SET) Users Guide

    Energy Technology Data Exchange (ETDEWEB)

    Pincock, Layne [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-10-01

    This document is the users guide to using the Screening and Evaluation Tool (SET). SET is a tool for comparing multiple fuel cycle options against a common set of criteria and metrics. It does this using standard multi-attribute utility decision analysis methods.

  16. NATIONAL STORMWATER CALCULATOR USER'S GUIDE ...

    Science.gov (United States)

    The National Stormwater Calculator is a simple to use tool for computing small site hydrology for any location within the US. It estimates the amount of stormwater runoff generated from a site under different development and control scenarios over a long term period of historical rainfall. The analysis takes into account local soil conditions, slope, land cover and meteorology. Different types of low impact development (LID) practices (also known as green infrastructure) can be employed to help capture and retain rainfall on-site. Future climate change scenarios taken from internationally recognized climate change projections can also be considered. The calculator provides planning level estimates of capital and maintenance costs which will allow planners and managers to evaluate and compare effectiveness and costs of LID controls.The calculator’s primary focus is informing site developers and property owners on how well they can meet a desired stormwater retention target. It can be used to answer such questions as:• What is the largest daily rainfall amount that can be captured by a site in either its pre-development, current, or post-development condition?• To what degree will storms of different magnitudes be captured on site?• What mix of LID controls can be deployed to meet a given stormwater retention target?• How well will LID controls perform under future meteorological projections made by global climate change models?• What are the relativ

  17. Projection models for health effects assessment in populations exposed to radioactive and nonradioactive pollutants. Volume IV. SPAHR user's guide

    International Nuclear Information System (INIS)

    Collins, J.J.; Lundy, R.T.

    1982-09-01

    The Simulation Package for the Analysis of Health Risk (SPAHR) is a computer software package based upon a demographic model for health risk projections. The model extends several health risk projection models by making realistic assumptions about the population at risk, and thus represents a distinct improvement over previous models. Complete documentation for use of SPAHR is contained in this five-volume publication. The demographic model in SPAHR estimates population response to environmental toxic exposures. Latency of response, changing dose level over time, competing risks from other causes of death, and population structure can be incorporated into SPAHR to project health risks. Risks are measured by morbid years, number of deaths, and loss of life expectancy. Comparisons of estimates of excess deaths demonstrate that previous health risk projection models may have underestimated excess deaths by a factor of from 2 to 10, depending on the pollutant and the exposure scenario. The software supporting the use of the demographic model is designed to be user oriented. Complex risk projections are made by responding to a series of prompts generated by the package. The flexibility and ease of use of SPAHR make it an important contribution to existing models and software packages. This volume gives the more advanced user of the SPAHR computer package the information required to create tailor-made programs for addressing specific issues not covered by the three interactive packages. It assumes that the user is familiar with the concepts and terms relating to demography and health risk assessment

  18. RELAP-7 User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hongbin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhao, Haihua [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zou, Ling [Idaho National Lab. (INL), Idaho Falls, ID (United States); Andrs, David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Berry, Ray Alden [Idaho National Lab. (INL), Idaho Falls, ID (United States); Martineau, Richard Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-12-01

    The document contains a user's guide on how to run the RELAP-7 code. The RELAP-7 code is the next generation nuclear reactor system safety analysis code being developed at the Idaho National Laboratory. RELAP-7 will become the main reactor systems simulation toolkit for the LWRS (Light Water Reactor Sustainability) program’s RISMC (Risk Informed Safety Margin Characterization) effort and the next generation tool in the RELAP reactor safety/systems analysis application series. RELAP-7 is written with object oriented programming language C++. A number of example problems and their associated input files are presented in this document to guide users to run the RELAP-7 code starting with simple pipe problems to problems with increasing complexity.

  19. LAPACK users` guide: Release 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, E.; Bai, Z.; Bischof, C.; Demmel, J.; Dongarra, J.; Du Croz, J.; Greenbaum, A.; Hammarling, S.; McKenney, A.; Ostrouchov, S.; Sorensen, D.

    1992-01-31

    LAPACK is a transportable library of Fortran 77 subroutines for solving the most common problems in numerical linear algebra: systems of linear equations, linear least squares problems, eigenvalue problems and singular value problems. LAPACK is designed to supersede LINPACK and EISPACK, principally by restructuring the software to achieve much greater efficiency on vector processors, high-performance ``superscalar`` workstations, and shared-memory multi-processors. LAPACK also adds extra functionality, uses some new or improved algorithms, and integrates the two sets of algorithms into a unified package. The LAPACK Users` Guide gives an informal introduction to the design of the algorithms and software, summarizes the contents of the package, describes conventions used in the software and documentation, and includes complete specifications for calling the routines. This edition of the Users` guide describes Release 1.0 of LAPACK.

  20. Waste treatability guidance program. User`s guide. Revision 0

    Energy Technology Data Exchange (ETDEWEB)

    Toth, C.

    1995-12-21

    DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatability groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User`s Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan.

  1. National Stormwater Calculator User's Guide – VERSION 1.1

    Science.gov (United States)

    This document is the user's guide for running EPA's National Stormwater Calculator (http://www.epa.gov/nrmrl/wswrd/wq/models/swc/). The National Stormwater Calculator is a simple to use tool for computing small site hydrology for any location within the US.

  2. Guide to user modification of a three-dimensional digital ground-water model for Salt Lake Valley, Utah

    Science.gov (United States)

    Seiler, R.L.; Waddell, K.M.

    1986-01-01

    A digital-computer model was calibrated to simulate, in three dimensions, the ground-water flow in the principal and shallow-unconfined aquifers in Salt Lake Valley, Utah. The model can be used to predict water-level and waterbudget changes that would be caused by changes in well recharge or discharge. This report shows how a user can revise the input data so that recharging or discharging wells may be simulated and how stress-period intervals can be varied to simulate different periods of recharge or discharge.

  3. Hearing aid user guides: suitability for older adults.

    Science.gov (United States)

    Caposecco, Andrea; Hickson, Louise; Meyer, Carly

    2014-02-01

    The aim of this study was to analyse the content, design, and readability of printed hearing aid user guides to determine their suitability for older adults, who are the main users of hearing aids. Hearing aid user guides were assessed using four readability formulae and a standardized tool to assess content and design (SAM - Suitability Assessment of Materials). A sample of 36 hearing aid user guides (four user guides from nine different hearing aid manufacturers) were analysed. Sixty nine percent of user guides were rated 'not suitable' and 31% were rated 'adequate' for their suitability. Many scored poorly for scope, vocabulary, aspects of layout and typography, and learning stimulation and motivation. The mean reading grade level for all user guides was grade 9.6 which is too high for older adults. The content, design, and readability of hearing aid user guides are not optimal for older adults and thus may serve as a barrier to successful hearing aid outcomes for this population.

  4. TOUGH2 User's Guide Version 2

    International Nuclear Information System (INIS)

    Pruess, K.; Oldenburg, C.M.; Moridis, G.J.

    1999-01-01

    TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, and unsaturated and saturated zone hydrology. TOUGH2 was first released to the public in 1991; the 1991 code was updated in 1994 when a set of preconditioned conjugate gradient solvers was added to allow a more efficient solution of large problems. The current Version 2.0 features several new fluid property modules and offers enhanced process modeling capabilities, such as coupled reservoir-wellbore flow, precipitation and dissolution effects, and multiphase diffusion. Numerous improvements in previously released modules have been made and new user features have been added, such as enhanced linear equation solvers, and writing of graphics files. The T2VOC module for three-phase flows of water, air and a volatile organic chemical (VOC), and the T2DM module for hydrodynamic dispersion in 2-D flow systems have been integrated into the overall structure of the code and are included in the Version 2.0 package. Data inputs are upwardly compatible with the previous version. Coding changes were generally kept to a minimum, and were only made as needed to achieve the additional functionalities desired. TOUGH2 is written in standard FORTRAN77 and can be run on any platform, such as workstations, PCs, Macintosh, mainframe and supercomputers, for which appropriate FORTRAN compilers are available. This report is a self-contained guide to application of TOUGH2 to subsurface flow problems. It gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used. Illustrative sample problems are presented along with detailed instructions for preparing input data

  5. Miro V3.0: user guide and reference manual

    International Nuclear Information System (INIS)

    Donnat, Ph.; Treimany, C.; Morice, O.; Ribeyre, X.

    1998-06-01

    This paper contains the user's guide and reference manual of Miro software. This software is used for simulating propagation and amplification of laser beams in laser devices as Megajoules or NIF. The physical effects taken into account ar essentially: saturated amplification, absorption, Kerr effect, birefringence and aberrations. The models of propagation are either geometrical optics of parallel beams, or Fresnel diffraction. A graphic user interface as been included to allow interactive management of optical devices and results. A Unix environment with X-Window and Motif is required to run Miro. The user's guide gives a short insight of the software. The reference manual details the physical models and the way they are implanted in Miro. (author)

  6. RADTRAN 6/RadCat 6 user guide.

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F.; Hinojosa, Daniel; Heames, Terence John; Farnum, Cathy Ottinger; Kalinina, Elena Arkadievna

    2013-09-01

    This document provides a detailed discussion and a guide for the use of the RadCat 6.0 Graphical User Interface input file generator for the RADTRAN code, Version 6. RadCat 6.0 integrates the newest analysis capabilities of RADTRAN 6.0, including an economic model, updated loss-of-lead shielding model, a new ingestion dose model, and unit conversion. As of this writing, the RADTRAN version in use is RADTRAN 6.02.

  7. HyRAM V1.0 User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Groth, Katrina M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zumwalt, Hannah Ruth [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clark, Andrew Jordan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-03-01

    Hydrogen Risk Assessment Models (HyRAM) is a prototype software toolkit that integrates data and methods relevant to assessing the safety of hydrogen fueling and storage infrastructure. The HyRAM toolkit integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing the impact of hydrogen hazards, including thermal effects from jet fires and thermal pressure effects from deflagration. HyRAM version 1.0 incorporates generic probabilities for equipment failures for nine types of components, and probabilistic models for the impact of heat flux on humans and structures, with computationally and experimentally validated models of various aspects of gaseous hydrogen release and flame physics. This document provides an example of how to use HyRAM to conduct analysis of a fueling facility. This document will guide users through the software and how to enter and edit certain inputs that are specific to the user-defined facility. Description of the methodology and models contained in HyRAM is provided in [1]. This User’s Guide is intended to capture the main features of HyRAM version 1.0 (any HyRAM version numbered as 1.0.X.XXX). This user guide was created with HyRAM 1.0.1.798. Due to ongoing software development activities, newer versions of HyRAM may have differences from this guide.

  8. TBCODE (release 2.1) user guide

    International Nuclear Information System (INIS)

    Morris, S.

    1998-01-01

    This report is the User Guide for the Turning Bands program 'TBCODE' for generating realizations of normally-distributed correlated multidimensional random fields. The report describes the capabilities of the program, and explains how to install and run the program on a UNIX workstation. The input required from the user is explained in detail, together with the format of the output files produced by the program. An illustrative example is given, including a complete listing of all input and output files used. The quality system under which the software has been developed is described. The report also includes a specification of the subroutines SIM2D and SIM3D used to generate the random fields. These subroutines may be used separately from TBCODE. (author)

  9. ORA User’s Guide 2011

    Science.gov (United States)

    2011-06-13

    reports to generate. Please note the following general guidelines for the script: 1. camel case capitalization is used for element names: therefore...Meta-Matrix (MM), texts are coded in AutoMap according to a taxonomy or ontology (e.g. meta- matrix, while are ontologies can be specified by the user...and edges represent emails and mental models. In type 5, nodes represent the categories of the taxonomy as specified by the user, and the edges

  10. EQ6, a computer program for reaction path modeling of aqueous geochemical systems: Theoretical manual, user`s guide, and related documentation (Version 7.0); Part 4

    Energy Technology Data Exchange (ETDEWEB)

    Wolery, T.J.; Daveler, S.A.

    1992-10-09

    EQ6 is a FORTRAN computer program in the EQ3/6 software package (Wolery, 1979). It calculates reaction paths (chemical evolution) in reacting water-rock and water-rock-waste systems. Speciation in aqueous solution is an integral part of these calculations. EQ6 computes models of titration processes (including fluid mixing), irreversible reaction in closed systems, irreversible reaction in some simple kinds of open systems, and heating or cooling processes, as well as solve ``single-point`` thermodynamic equilibrium problems. A reaction path calculation normally involves a sequence of thermodynamic equilibrium calculations. Chemical evolution is driven by a set of irreversible reactions (i.e., reactions out of equilibrium) and/or changes in temperature and/or pressure. These irreversible reactions usually represent the dissolution or precipitation of minerals or other solids. The code computes the appearance and disappearance of phases in solubility equilibrium with the water. It finds the identities of these phases automatically. The user may specify which potential phases are allowed to form and which are not. There is an option to fix the fugacities of specified gas species, simulating contact with a large external reservoir. Rate laws for irreversible reactions may be either relative rates or actual rates. If any actual rates are used, the calculation has a time frame. Several forms for actual rate laws are programmed into the code. EQ6 is presently able to model both mineral dissolution and growth kinetics.

  11. Training Requirements and Information Management System. Software user guide

    Energy Technology Data Exchange (ETDEWEB)

    Cillan, T.F.; Hodgson, M.A.

    1992-05-01

    This is the software user`s guide for the Training Requirements and Information Management System. This guide defines and describes the software operating procedures as they apply to the end user of the software program. This guide is intended as a reference tool for the user who already has an indepth knowledge of the Training Requirements and Information Management System functions and data reporting requirement.

  12. METEOR v1.0 - User's Guide

    International Nuclear Information System (INIS)

    Palomo, E.

    1994-01-01

    This script is a User's Guide for the software package METEOR for statistical analysis of meteorological data series. The original version of METEOR have been developed by Ph.D. Elena Palomo, CIEMAT-IER, GIMASE. It is built by linking programs and routines written in FORTRAN 77 and it adds the graphical capabilities of GNUPLOT. The shape of this toolbox was designed following the criteria of modularity, flexibility and agility criteria. All the input, output and analysis options are structured in three main menus: i) the first is aimed to evaluate the quality of the data set; ii) the second is aimed for pre-processing of the data; and iii) the third is aimed towards the statistical analyses and for creating the graphical outputs. Actually the information about METEOR is constituted by three documents written in spanish: 1) METEOR v1.0: User's guide; 2) METEOR v1.0: A usage example; 3) METEOR v1.0: Design and structure of the software package. (Author)

  13. A guide to MATLAB for beginners and experienced users

    CERN Document Server

    Hunt, Brian R; Rosenberg, Jonathan M

    2014-01-01

    Now in its third edition, this outstanding textbook explains everything you need to get started using MATLAB®. It contains concise explanations of essential MATLAB commands, as well as easily understood instructions for using MATLAB's programming features, graphical capabilities, simulation models, and rich desktop interface. MATLAB 8 and its new user interface is treated extensively in the book. New features in this edition include: a complete treatment of MATLAB's publish feature; new material on MATLAB graphics, enabling the user to master quickly the various symbolic and numerical plotting routines; and a robust presentation of MuPAD® and how to use it as a stand-alone platform. The authors have also updated the text throughout, reworking examples and exploring new applications. The book is essential reading for beginners, occasional users and experienced users wishing to brush up their skills. Further resources are available from the authors' website at www-math.umd.edu/schol/a-guide-to-matlab.html.

  14. Presto 4.18 user's guide.

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, Benjamin Whiting

    2010-09-01

    Presto is a Lagrangian, three-dimensional explicit, transient dynamics code that is used to analyze solids subjected to large, suddenly applied loads. The code is designed for a parallel computing environment and for problems with large deformations, nonlinear material behavior, and contact. Presto also has a versatile element library that incorporates both continuum elements and structural elements. This user's guide describes the input for Presto that gives users access to all the current functionality in the code. The environment in which Presto is built allows it to be coupled with other engineering analysis codes. Using a concept called scope, the input structure reflects the fact that Presto can be used in a coupled environment. The user's guide describes how scope is implemented from the outermost to the innermost scopes. Within a given scope, the descriptions of input commands are grouped based on functionality of the code. For example, all material input command lines are described in a chapter of the user's guide for all the material models that can be used in Presto.

  15. Presto 2.9 user's guide.

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Joseph

    2008-05-01

    Presto is a Lagrangian, three-dimensional explicit, transient dynamics code that is used to analyze solids subjected to large, suddenly applied loads. The code is designed for a parallel computing environment and for problems with large deformations, nonlinear material behavior, and contact. Presto also has a versatile element library that incorporates both continuum elements and structural elements. This user's guide describes the input for Presto that gives users access to all the current functionality in the code. The environment in which Presto is built allows it to be coupled with other engineering analysis codes. Using a concept called scope, the input structure reflects the fact that Presto can be used in a coupled environment. The user's guide describes how scope is implemented from the outermost to the innermost scopes. Within a given scope, the descriptions of input commands are grouped based on functionality of the code. For example, all material input command lines are described in a chapter of the user's guide for all the material models that can be used in Presto.

  16. Zeiss ΣIGMA VP-FE-SEM User Guide

    Science.gov (United States)

    User guide for analyzing carbon based nanomaterials on a Zeiss Sigma microscope. The guide includes helpful steps for sample preparation and loading. Specific topics utilizing the scanning electron microscope are instrumentation startup and imagining. A variety of detectors in...

  17. ITOUGH2 user`s guide version 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Finsterle, S.

    1993-08-01

    ITOUGH2 is a program to estimate hydrogeologic model parameters for the numerical simulator TOUGH2. TOUGH2 was developed by Karsten Pruess at Lawrence Berkeley Laboratory for simulating non-isothermal flows of multicomponent, multiphase fluids in porous and fractured media. ITOUGH2 solves the inverse problem by automatic model calibration based on an indirect approach, in which some function of the difference between observed and model-predicted system response and appropriately weighted prior information about the parameters is minimized using standard optimization techniques. ITOUGH2 also provides a detailed error analysis of the estimated parameter set, and employs some procedures to study error propagation for prediction runs. This report includes a review of the inverse modeling theory, and a detailed description of the program architecture, input language, and the various user features provided by ITOUGH2. A sample problem is given to illustrate code application.

  18. SE Requirements Development Tool User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Benson, Faith Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-13

    The LANL Systems Engineering Requirements Development Tool (SERDT) is a data collection tool created in InfoPath for use with the Los Alamos National Laboratory’s (LANL) SharePoint sites. Projects can fail if a clear definition of the final product requirements is not performed. For projects to be successful requirements must be defined early in the project and those requirements must be tracked during execution of the project to ensure the goals of the project are met. Therefore, the focus of this tool is requirements definition. The content of this form is based on International Council on Systems Engineering (INCOSE) and Department of Defense (DoD) process standards and allows for single or collaborative input. The “Scoping” section is where project information is entered by the project team prior to requirements development, and includes definitions and examples to assist the user in completing the forms. The data entered will be used to define the requirements and once the form is filled out, a “Requirements List” is automatically generated and a Word document is created and saved to a SharePoint document library. SharePoint also includes the ability to download the requirements data defined in the InfoPath from into an Excel spreadsheet. This User Guide will assist you in navigating through the data entry process.

  19. User's Guide for RESRAD-OFFSITE

    International Nuclear Information System (INIS)

    Gnanapragasam, E.; Yu, C.

    2015-01-01

    The RESRAD-OFFSITE code can be used to model the radiological dose or risk to an offsite receptor. This User's Guide for RESRAD-OFFSITE Version 3.1 is an update of the User's Guide for RESRAD-OFFSITE Version 2 contained in the Appendix A of the User's Manual for RESRAD-OFFSITE Version 2 (ANL/EVS/TM/07-1, DOE/HS-0005, NUREG/CR-6937). This user's guide presents the basic information necessary to use Version 3.1 of the code. It also points to the help file and other documents that provide more detailed information about the inputs, the input forms and features/tools in the code; two of the features (overriding the source term and computing area factors) are discussed in the appendices to this guide. Section 2 describes how to download and install the code and then verify the installation of the code. Section 3 shows ways to navigate through the input screens to simulate various exposure scenarios and to view the results in graphics and text reports. Section 4 has screen shots of each input form in the code and provides basic information about each parameter to increase the user's understanding of the code. Section 5 outlines the contents of all the text reports and the graphical output. It also describes the commands in the two output viewers. Section 6 deals with the probabilistic and sensitivity analysis tools available in the code. Section 7 details the various ways of obtaining help in the code.

  20. Personal lifelong user model clouds

    DEFF Research Database (Denmark)

    Dolog, Peter; Kay, Judy; Kummerfeld, Bob

    This paper explores an architecture for very long term user modelling, based upon personal user model clouds. These ensure that the individual's applications can access their model whenever it is needed. At the same time, the user can control the use of their user model. So, they can ensure...... which combines both. Finally we discuss implications of our approach for consistency and freshness of the user model information....... it is accessed only when and where they wish, by applications that they wish. We consider the challenges of representing user models so that they can be reused by multiple applications. We indicate potential synergies between distributed and centralised user modelling architectures, proposing an architecture...

  1. Observing the user experience a practitioner's guide to user research

    CERN Document Server

    Kuniavsky, Mike; Goodman, Elizabeth

    2012-01-01

    The gap between who designers and developers imagine their users are, and who those users really are can be the biggest problem with product development. Observing the User Experience will help you bridge that gap to understand what your users want and need from your product, and whether they'll be able to use what you've created. Filled with real-world experience and a wealth of practical information, this book presents a complete toolbox of techniques to help designers and developers see through the eyes of their users. It provides in-depth coverage of 13 user experience research techniques

  2. I and C functional test facility user guide

    International Nuclear Information System (INIS)

    Kwon, Ki Chun

    1996-07-01

    The objective of I and C functional test facility (FTF) is to validate newly developed digital control and protection algorithm, alarm reduction algorithm and the function of operator support system and so on. Test facility is divided into three major parts; software, hardware and graphic user interface. Software consists of mathematical modeling which simulates 3 loop pressurizer water reactor, 993 MWe Westinghouse plant and supervisory module which interpret user instructions and data interface program. FTF is implemented in HP747I workstation using FORTRAN77 and ''C'' language under UNIX operating system. This User Guide provides file structure, instructions and program modification method and provides initial data, malfunction list, process variables list and simulation diagram as an appendix to test developed prototype. 12 figs. (Author)

  3. DOE-1: users guide. [Single-story building in Chicago

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    DOE-1 is a public-domain computer program that allows users to explore the energy behavior of proposed and existing buildings and their associated heating, ventilation, and air-conditioning systems. Incorporating mathematical models and utilizing hourly weather data, DOE-1 calculates the hour-by-hour performance and response of a building whose description has been provided by the user. In addition, DOE-1 can produce an economic analysis of the energy use and the costs and benefits of making alternation in design. DOE-1 is intended to be used by architects, engineers, and others concerned with the energy analysis of buildings and with the consequent economic implications. The source program is available from NESC and DOE-1 can be run in this manner on any CDC computer. The Users Guide example is a single-story office building located in Chicago.

  4. I and C functional test facility user guide

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Ki Chun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-07-01

    The objective of I and C functional test facility (FTF) is to validate newly developed digital control and protection algorithm, alarm reduction algorithm and the function of operator support system and so on. Test facility is divided into three major parts; software, hardware and graphic user interface. Software consists of mathematical modeling which simulates 3 loop pressurizer water reactor, 993 MWe Westinghouse plant and supervisory module which interpret user instructions and data interface program. FTF is implemented in HP747I workstation using FORTRAN77 and ``C`` language under UNIX operating system. This User Guide provides file structure, instructions and program modification method and provides initial data, malfunction list, process variables list and simulation diagram as an appendix to test developed prototype. 12 figs. (Author).

  5. Adagio 4.14 users guide.

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, Benjamin Whiting

    2009-10-01

    This document is a user's guide for the code Adagio. Adagio is a three-dimensional, implicit solid mechanics code with a versatile element library, nonlinear material models, and capabilities for modeling large deformation and contact. Adagio is a parallel code, and its nonlinear solver and contact capabilities enable scalable solutions of large problems. It is built on the SIERRA Framework [1, 2]. SIERRA provides a data management framework in a parallel computing environment that allows the addition of capabilities in a modular fashion. The Adagio 4.14 User's Guide provides information about the functionality in Adagio and the command structure required to access this functionality in a user input file. This document is divided into chapters based primarily on functionality. For example, the command structure related to the use of various element types is grouped in one chapter; descriptions of material models are grouped in another chapter. The input and usage of Adagio is similar to that of the code Presto [3]. Presto, like Adagio, is a solid mechanics code built on the SIERRA Framework. The primary difference between the two codes is that Presto uses explicit time integration for transient dynamics analysis, whereas Adagio is an implicit code. Because of the similarities in input and usage between Adagio and Presto, the user's guides for the two codes are structured in the same manner and share common material. (Once you have mastered the input structure for one code, it will be easy to master the syntax structure for the other code.) To maintain the commonality between the two user's guides, we have used a variety of techniques. For example, references to Presto may be found in the Adagio user's guide and vice versa, and the chapter order across the two guides is the same. On the other hand, each of the two user's guides is expressly tailored to the features of the specific code and documents the particular functionality for that

  6. STMVOC User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Falta, R.W.; Pruess, K.

    1991-06-01

    This report contains instructions for using the STMVOC numerical simulator. This code, which was developed at Lawrence Berkeley Laboratory, is an extension of the TOUGH geothermal code for use in problems involving subsurface contamination by nonaqueous phase liquids (NAPLs). The code is used for modeling the nonisothermal transport of air, water, and an organic chemical in three fluid phases. A discussion of the physical processes included in the simulator is given along with a brief outline of the mathematical formulation. A detailed guide to preparing the STMVOC input file with several illustrative examples is provided. 22 refs., 27 figs., 3 tabs.

  7. Time Projection Compton Spectrometer (TPCS). User`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Landron, C.O. [Sandia National Labs., Albuquerque, NM (United States); Baldwin, G.T. [International Atomic Energy Agency, Vienna (Austria)

    1994-04-01

    The Time Projection Compton Spectrometer (TPCS) is a radiation diagnostic designed to determine the time-integrated energy spectrum between 100 keV -- 2 MeV of flash x-ray sources. This guide is intended as a reference for the routine operator of the TPCS. Contents include a brief overview of the principle of operation, detailed component descriptions, detailed assembly and disassembly procedures, guide to routine operations, and troubleshooting flowcharts. Detailed principle of operation, signal analysis and spectrum unfold algorithms are beyond the scope of this guide; however, the guide makes reference to sources containing this information.

  8. Evaluation of a Modified User Guide for Hearing Aid Management.

    Science.gov (United States)

    Caposecco, Andrea; Hickson, Louise; Meyer, Carly; Khan, Asaduzzaman

    2016-01-01

    This study investigated if a hearing aid user guide modified using best practice principles for health literacy resulted in superior ability to perform hearing aid management tasks, compared with the user guide in the original form. This research utilized a two-arm study design to compare the original manufacturer's user guide with a modified user guide for the same hearing aid--an Oticon Acto behind-the-ear aid with an open dome. The modified user guide had a lower reading grade level (4.2 versus 10.5), used a larger font size, included more graphics, and had less technical information. Eighty-nine adults ages 55 years and over were included in the study; none had experience with hearing aid use or management. Participants were randomly assigned either the modified guide (n = 47) or the original guide (n = 42). All participants were administered the Hearing Aid Management test, designed for this study, which assessed their ability to perform seven management tasks (e.g., change battery) with their assigned user guide. The regression analysis indicated that the type of user guide was significantly associated with performance on the Hearing Aid Management test, adjusting for 11 potential covariates. In addition, participants assigned the modified guide required significantly fewer prompts to perform tasks and were significantly more likely to perform four of the seven tasks without the need for prompts. The median time taken by those assigned the modified guide was also significantly shorter for three of the tasks. Other variables associated with performance on the Hearing Aid Management test were health literacy level, finger dexterity, and age. Findings indicate that the need to design hearing aid user guides in line with best practice principles of health literacy as a means of facilitating improved hearing aid management in older adults.

  9. Numerical simulation of dynamics of brushless dc motors for aerospace and other applications. Volume 2: User's guide to computer EMA model

    Science.gov (United States)

    Demerdash, N. A. O.; Nehl, T. W.

    1979-01-01

    A description and user's guide of the computer program developed to simulate the dynamics of an electromechanical actuator for aerospace applications are presented. The effects of the stator phase currents on the permanent magnets of the rotor are examined. The voltage and current waveforms present in the power conditioner network during the motoring, regenerative braking, and plugging modes of operation are presented and discussed.

  10. OSIRIS (the first step). A user guide

    International Nuclear Information System (INIS)

    Engberg, D.

    1999-01-01

    The OSIRIS Project will explore the instrumental horizons available with the cold neutrons from a pulsed source and especially the totally new avenues available to polarised neutrons on these sources. On pulsed sources, polarisation techniques offer great potential for high resolution studies, and only lack of opportunity has left the field unexploited. On OSIRIS, the fundamentally novel methods developed on IRIS will be combined with proven and extended neutron polarising techniques. The high flux available at ISIS, coupled to the advanced design of the OSIRIS guide, will provide the means to take this field to its next evolutionary stage. By exploiting the combination of sharp pulses, white beams and cold neutrons from ISIS, high resolution measurements, both dynamic and structural, can be carried out using both unpolarised and polarised neutrons. The OSIRIS Project is an international collaboration involving India, Italy, Spain, Sweden, Switzerland and the United Kingdom. The project has three well-defined phases; phase 1: Extraction of a second cold beam guide from the IRIS beam line; phase 2: large d-spacing powder diffraction, incident beam polarised powder diffraction; phase 3: high resolution spectroscopy, spectroscopy polarisation analysis, diffraction polarisation analysis. This is the user manual for the first step of the OSIRIS project, which means that phase 2 is now almost finished, i.e. we have a high resolution large d-spacing diffractometer, but the incident beam polarisation is as of yet only used for tests. You can find more information on the Osiris web-pages at . This document is also available in an html version at that address. This document is divided into five different parts. First, this short introduction, then what you need to think about before your arrive at ISIS, thereafter, the different parts of the instrument are described, together with some examples of sample environments. Fourthly, the actual running of an experiment is dealt

  11. Users guide for the ANL IBM SPx

    Energy Technology Data Exchange (ETDEWEB)

    Gropp, W.; Lusk, E.

    1994-12-01

    This guide presents the features of the IBM SPx installed in the Mathematics and Computer Science Division at Argonne National Laboratory. The guide describes the available hardware and software, access policies, and hints for using the system productively.

  12. A user's guide to the GoldSim/BLT-MS integrated software package:a low-level radioactive waste disposal performance assessment model.

    Energy Technology Data Exchange (ETDEWEB)

    Knowlton, Robert G.; Arnold, Bill Walter; Mattie, Patrick D.

    2007-03-01

    Sandia National Laboratories (Sandia), a U.S. Department of Energy National Laboratory, has over 30 years experience in the assessment of radioactive waste disposal and at the time of this publication is providing assistance internationally in a number of areas relevant to the safety assessment of radioactive waste disposal systems. In countries with small radioactive waste programs, international technology transfer program efforts are often hampered by small budgets, schedule constraints, and a lack of experienced personnel. In an effort to surmount these difficulties, Sandia has developed a system that utilizes a combination of commercially available software codes and existing legacy codes for probabilistic safety assessment modeling that facilitates the technology transfer and maximizes limited available funding. Numerous codes developed and endorsed by the United States Nuclear Regulatory Commission (NRC) and codes developed and maintained by United States Department of Energy are generally available to foreign countries after addressing import/export control and copyright requirements. From a programmatic view, it is easier to utilize existing codes than to develop new codes. From an economic perspective, it is not possible for most countries with small radioactive waste disposal programs to maintain complex software, which meets the rigors of both domestic regulatory requirements and international peer review. Therefore, revitalization of deterministic legacy codes, as well as an adaptation of contemporary deterministic codes, provides a credible and solid computational platform for constructing probabilistic safety assessment models. This document is a reference users guide for the GoldSim/BLT-MS integrated modeling software package developed as part of a cooperative technology transfer project between Sandia National Laboratories and the Institute of Nuclear Energy Research (INER) in Taiwan for the preliminary assessment of several candidate low

  13. A user's guide to the GoldSim/BLT-MS integrated software package:a low-level radioactive waste disposal performance assessment model

    International Nuclear Information System (INIS)

    Knowlton, Robert G.; Arnold, Bill Walter; Mattie, Patrick D.

    2007-01-01

    Sandia National Laboratories (Sandia), a U.S. Department of Energy National Laboratory, has over 30 years experience in the assessment of radioactive waste disposal and at the time of this publication is providing assistance internationally in a number of areas relevant to the safety assessment of radioactive waste disposal systems. In countries with small radioactive waste programs, international technology transfer program efforts are often hampered by small budgets, schedule constraints, and a lack of experienced personnel. In an effort to surmount these difficulties, Sandia has developed a system that utilizes a combination of commercially available software codes and existing legacy codes for probabilistic safety assessment modeling that facilitates the technology transfer and maximizes limited available funding. Numerous codes developed and endorsed by the United States Nuclear Regulatory Commission (NRC) and codes developed and maintained by United States Department of Energy are generally available to foreign countries after addressing import/export control and copyright requirements. From a programmatic view, it is easier to utilize existing codes than to develop new codes. From an economic perspective, it is not possible for most countries with small radioactive waste disposal programs to maintain complex software, which meets the rigors of both domestic regulatory requirements and international peer review. Therefore, revitalization of deterministic legacy codes, as well as an adaptation of contemporary deterministic codes, provides a credible and solid computational platform for constructing probabilistic safety assessment models. This document is a reference users guide for the GoldSim/BLT-MS integrated modeling software package developed as part of a cooperative technology transfer project between Sandia National Laboratories and the Institute of Nuclear Energy Research (INER) in Taiwan for the preliminary assessment of several candidate low

  14. User guide for computer program food

    International Nuclear Information System (INIS)

    Baker, D.A.

    1977-02-01

    An interactive code, FOOD, has been written in BASIC for the UNIVAC 1108 to facilitate calculation of internal radiation doses to man from radionuclides in food products. In the dose model, vegetation may be contaminated by either air or irrigation water containing radionuclides. The model considers two mechanisms for radionuclide contamination of vegetation: direct deposition of leaves, and uptake from soil through the root system. The user may select up to 14 food categories with corresponding consumption rates, growing periods, and either irrigation rates or atmospheric deposition rates. These foods include various kinds of produce, grains, and animal products. At present, doses may be calculated for the total body and six internal organs from 186 radionuclides. Dose summaries can be displayed at the local terminal. Further details on percent contribution to dose by nuclide and by food type are available from an auxiliary high-speed printer. This output also includes estimated radionuclide concentrations in soil, plants, and animal products

  15. A User's Guide for the Fabulous Abacus.

    Science.gov (United States)

    Hausrath, Alan R.

    A guide for using an abacus is accompanied by a heavy-duty paper abacus. The guide includes instruction in how to represent numbers on an abacus as well as in place value, addition, carrying, subtraction, and borrowing. Diagrams are used throughout the guide and a brief English-Spanish vocabulary list specific to the use of the abacus is included.…

  16. Presto 4.14 users guide.

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, Benjamin Whiting

    2009-10-01

    Presto is a three-dimensional transient dynamics code with a versatile element library, nonlinear material models, large deformation capabilities, and contact. It is built on the SIERRA Framework [1, 2]. SIERRA provides a data management framework in a parallel computing environment that allows the addition of capabilities in a modular fashion. Contact capabilities are parallel and scalable. The Presto 4.14 User's Guide provides information about the functionality in Presto and the command structure required to access this functionality in a user input file. This document is divided into chapters based primarily on functionality. For example, the command structure related to the use of various element types is grouped in one chapter; descriptions of material models are grouped in another chapter. The input and usage of Presto is similar to that of the code Adagio [3]. Adagio is a three-dimensional quasi-static code with a versatile element library, nonlinear material models, large deformation capabilities, and contact. Adagio, like Presto, is built on the SIERRA Framework [1]. Contact capabilities for Adagio are also parallel and scalable. A significant feature of Adagio is that it offers a multilevel, nonlinear iterative solver. Because of the similarities in input and usage between Presto and Adagio, the user's guides for the two codes are structured in the same manner and share common material. (Once you have mastered the input structure for one code, it will be easy to master the syntax structure for the other code.) To maintain the commonality between the two user's guides, we have used a variety of techniques. For example, references to Adagio may be found in the Presto user's guide and vice versa, and the chapter order across the two guides is the same. On the other hand, each of the two user's guides is expressly tailored to the features of the specific code and documents the particular functionality for that code. For example

  17. Adagio 4.16 users guide.

    Energy Technology Data Exchange (ETDEWEB)

    2010-05-01

    Adagio is a three-dimensional, implicit solid mechanics code with a versatile element library, nonlinear material models, and capabilities for modeling large deformation and contact. Adagio is a parallel code, and its nonlinear solver and contact capabilities enable scalable solutions of large problems. It is built on the SIERRA Framework [1, 2]. SIERRA provides a data management framework in a parallel computing environment that allows the addition of capabilities in a modular fashion. The Adagio 4.16 User's Guide provides information about the functionality in Adagio and the command structure required to access this functionality in a user input file. This document is divided into chapters based primarily on functionality. For example, the command structure related to the use of various element types is grouped in one chapter; descriptions of material models are grouped in another chapter. The input and usage of Adagio is similar to that of the code Presto [3]. Presto, like Adagio, is a solid mechanics code built on the SIERRA Framework. The primary difference between the two codes is that Presto uses explicit time integration for transient dynamics analysis, whereas Adagio is an implicit code. Because of the similarities in input and usage between Adagio and Presto, the user's guides for the two codes are structured in the same manner and share common material. (Once you have mastered the input structure for one code, it will be easy to master the syntax structure for the other code.) To maintain the commonality between the two user's guides, we have used a variety of techniques. For example, references to Presto may be found in the Adagio user's guide and vice versa, and the chapter order across the two guides is the same. On the other hand, each of the two user's guides is expressly tailored to the features of the specific code and documents the particular functionality for that code. For example, though both Presto and Adagio have

  18. Presto 4.16 users guide.

    Energy Technology Data Exchange (ETDEWEB)

    2010-05-01

    Presto is a three-dimensional transient dynamics code with a versatile element library, nonlinear material models, large deformation capabilities, and contact. It is built on the SIERRA Framework [1, 2]. SIERRA provides a data management framework in a parallel computing environment that allows the addition of capabilities in a modular fashion. Contact capabilities are parallel and scalable. The Presto 4.16 User's Guide provides information about the functionality in Presto and the command structure required to access this functionality in a user input file. This document is divided into chapters based primarily on functionality. For example, the command structure related to the use of various element types is grouped in one chapter; descriptions of material models are grouped in another chapter. The input and usage of Presto is similar to that of the code Adagio [3]. Adagio is a three-dimensional quasi-static code with a versatile element library, nonlinear material models, large deformation capabilities, and contact. Adagio, like Presto, is built on the SIERRA Framework [1]. Contact capabilities for Adagio are also parallel and scalable. A significant feature of Adagio is that it offers a multilevel, nonlinear iterative solver. Because of the similarities in input and usage between Presto and Adagio, the user's guides for the two codes are structured in the same manner and share common material. (Once you have mastered the input structure for one code, it will be easy to master the syntax structure for the other code.) To maintain the commonality between the two user's guides, we have used a variety of techniques. For example, references to Adagio may be found in the Presto user's guide and vice versa, and the chapter order across the two guides is the same. On the other hand, each of the two user's guides is expressly tailored to the features of the specific code and documents the particular functionality for that code. For example

  19. LADTAP II: technical reference and user guide

    International Nuclear Information System (INIS)

    Strenge, D.L.; Peloquin, R.A.; Whelan, G.

    1986-04-01

    This report describes the US Nuclear Regulatory Commission computer program LADTAP II, which performs environmental dose analyses for releases of radioactive effluents from nuclear power plants into surface waters. The analyses estimate radiation dose to individuals, population groups, and biota from ingestion (aquatic foods, water, and terrestrial irrigated foods) and external exposure (shoreline, swimming, and boating) pathways. The calculated doses provide information for National Environmental Policy Act (NEPA) evaluations and for determining compliance with Appendix I of 10 CFR 50 (the ''ALARA'' philosophy). The report also instructs the user in preparing input to the program, describes the mathematical models that are used, and supplies detailed information on program structure and parameters used to modify the program

  20. LADTAP II: technical reference and user guide

    Energy Technology Data Exchange (ETDEWEB)

    Strenge, D.L.; Peloquin, R.A.; Whelan, G.

    1986-04-01

    This report describes the US Nuclear Regulatory Commission computer program LADTAP II, which performs environmental dose analyses for releases of radioactive effluents from nuclear power plants into surface waters. The analyses estimate radiation dose to individuals, population groups, and biota from ingestion (aquatic foods, water, and terrestrial irrigated foods) and external exposure (shoreline, swimming, and boating) pathways. The calculated doses provide information for National Environmental Policy Act (NEPA) evaluations and for determining compliance with Appendix I of 10 CFR 50 (the ''ALARA'' philosophy). The report also instructs the user in preparing input to the program, describes the mathematical models that are used, and supplies detailed information on program structure and parameters used to modify the program.

  1. GASPAR II: Technical reference and user guide

    Energy Technology Data Exchange (ETDEWEB)

    Strenge, D.L.; Bander, T.J.; Soldat, J.K.

    1987-03-01

    This report describes the computer program GASPAR II used by the staff of the US Nuclear Regulatory Commission to perform environmental dose analyses for releases of radioactive effluents from nuclear power plants into the atmosphere. The analyses estimate radiation dose to individuals and population groups from inhalation, ingestion (terrestrial foods), and external-exposure (ground and plume) pathways. The calculated doses provide information for National Environmental Policy Act (NEPA) evaluations and for determining compliance with Appendix I of 10 CFR 50 (the ''ALARA'' philosophy). The report also instructs the user in preparing input to the program, describes the mathematical models that are used, and supplies detailed information on program structure and parameters used to modify the program. 20 refs., 11 figs., 77 tabs.

  2. GASPAR II: Technical reference and user guide

    International Nuclear Information System (INIS)

    Strenge, D.L.; Bander, T.J.; Soldat, J.K.

    1987-03-01

    This report describes the computer program GASPAR II used by the staff of the US Nuclear Regulatory Commission to perform environmental dose analyses for releases of radioactive effluents from nuclear power plants into the atmosphere. The analyses estimate radiation dose to individuals and population groups from inhalation, ingestion (terrestrial foods), and external-exposure (ground and plume) pathways. The calculated doses provide information for National Environmental Policy Act (NEPA) evaluations and for determining compliance with Appendix I of 10 CFR 50 (the ''ALARA'' philosophy). The report also instructs the user in preparing input to the program, describes the mathematical models that are used, and supplies detailed information on program structure and parameters used to modify the program. 20 refs., 11 figs., 77 tabs

  3. LANDIS 4.0 users guide. LANDIS: a spatially explicit model of forest landscape disturbance, management, and succession

    Science.gov (United States)

    Hong S. He; Wei Li; Brian R. Sturtevant; Jian Yang; Bo Z. Shang; Eric J. Gustafson; David J. Mladenoff

    2005-01-01

    LANDIS 4.0 is new-generation software that simulates forest landscape change over large spatial and temporal scales. It is used to explore how disturbances, succession, and management interact to determine forest composition and pattern. Also describes software architecture, model assumptions and provides detailed instructions on the use of the model.

  4. Audio Development Laboratory (ADL) User Test Planning Guide

    Science.gov (United States)

    Romero, Andy

    2012-01-01

    Test process, milestones and inputs are unknowns to first-time users of the ADL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  5. ImSET 3.1: Impact of Sector Energy Technologies Model Description and User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Scott, Michael J.; Livingston, Olga V.; Balducci, Patrick J.; Roop, Joseph M.; Schultz, Robert W.

    2009-05-22

    This 3.1 version of the Impact of Sector Energy Technologies (ImSET) model represents the next generation of the previously-built ImSET model (ImSET 2.0) that was developed in 2005 to estimate the macroeconomic impacts of energy-efficient technology in buildings. In particular, a special-purpose version of the Benchmark National Input-Output (I-O) model was designed specifically to estimate the national employment and income effects of the deployment of Office of Energy Efficiency and Renewable Energy (EERE)–developed energy-saving technologies. In comparison with the previous versions of the model, this version features the use of the U.S. Bureau of Economic Analysis 2002 national input-output table and the central processing code has been moved from the FORTRAN legacy operating environment to a modern C++ code. ImSET is also easier to use than extant macroeconomic simulation models and incorporates information developed by each of the EERE offices as part of the requirements of the Government Performance and Results Act. While it does not include the ability to model certain dynamic features of markets for labor and other factors of production featured in the more complex models, for most purposes these excluded features are not critical. The analysis is credible as long as the assumption is made that relative prices in the economy would not be substantially affected by energy efficiency investments. In most cases, the expected scale of these investments is small enough that neither labor markets nor production cost relationships should seriously affect national prices as the investments are made. The exact timing of impacts on gross product, employment, and national wage income from energy efficiency investments is not well-enough understood that much special insight can be gained from the additional dynamic sophistication of a macroeconomic simulation model. Thus, we believe that this version of ImSET is a cost-effective solution to estimating the economic

  6. User's Guide for Tactical Thinking Behaviorally Anchored Rating Scales

    National Research Council Canada - National Science Library

    Phillips, Jennifer K; Ross, Karol G; Shadrick, Scott B

    2006-01-01

    .... In conjunction, measurement techniques must be developed to assess tactical thinking skills. This research product is a user's guide for the Tactical Thinking Behaviorally Anchored Rating Scales (T-BARS...

  7. Tripoli-4 version 4 user guide

    International Nuclear Information System (INIS)

    Petit, O.; Hugot, F.X.; Lee, Y.K.; Jouanne, C.; Mazzolo, A.

    2008-01-01

    TRIPOLI-4 is a general purpose radiation transport code. It uses the Monte Carlo method to simulate neutron and photon behaviour in three-dimensional geometries. The main areas of applications include but are not restricted to: radiation protection and shielding, nuclear criticality safety, fission and fusion reactor design, nuclear instrumentation. Any pointwise cross-section data in ENDF/B format may be used: JEF2, ENDF/B-VI, JEFF3, ENDF/B-VII, JENDL3.3 etc. As for thermal neutrons, both free gas and S(alpha, beta) models are available. Easy-to-use powerful variance-reduction tools help the user to solve deep penetration problems. TRIPOLI-4 features a versatile and robust parallel operation mode, for heterogeneous network of workstations, or massively parallel machines. TRIPOLI-4 is supported by a range of graphics and algorithmic productivity tools which means that checking for geometry and input deck errors is easy. As for the qualification, TRIPOLI-4 benefits from an extensive range of benchmarks and comparisons with real measurements, and is therefore qualified for R and D, teaching as well as industrial use. (authors)

  8. WISE - User Guide and Implementation Notes

    CERN Document Server

    Hagen, P

    2008-01-01

    The goal of WISE is to prepare as accurately as possible the description of the LHC magnetic and geometric properties for use by the MAD-X model of the machine. WISE is designed to take into account the best estimate of uncertainties. The reason being that magnetic and geometric measurements have error bars associated with them, like calibration and resolution. Therefore WISE produces a number of instances of the most likely LHC machine that may be used to predict ranges of beam parameters. Magnetic and geometric data are downloaded from the different databases, missing information is completed, and uncertainties are added. This report contains a short section on how using the code and a detailed description of how data relative to magnetic and geometric imperfections, and slot allocation are prepared. The code is built as a transparent box, thus allowing inspection of all the information acquired during the production and test of the LHC magnets. The user interface offers a range of options that allow testin...

  9. User's guide : pavement marking management system database.

    Science.gov (United States)

    2011-12-01

    Pavement markings play a critical role in maintaining a safe and efficient driving environment for road users, especially during nighttime conditions. The Texas Department of Transportation (TxDOT) spends millions of dollars each year for installatio...

  10. Waste Management Information System (WMIS) User Guide

    Energy Technology Data Exchange (ETDEWEB)

    R. E. Broz

    2008-12-22

    This document provides the user of the Waste Management Information System (WMIS) instructions on how to use the WMIS software. WMIS allows users to initiate, track, and close waste packages. The modular design supports integration and utilization of data throuh the various stages of waste management. The phases of the waste management work process include generation, designation, packaging, container management, procurement, storage, treatment, transportation, and disposal.

  11. Waste Management Information System (WMIS) User Guide

    International Nuclear Information System (INIS)

    Broz, R.E.

    2008-01-01

    This document provides the user of the Waste Management Information System (WMIS) instructions on how to use the WMIS software. WMIS allows users to initiate, track, and close waste packages. The modular design supports integration and utilization of data through the various stages of waste management. The phases of the waste management work process include generation, designation, packaging, container management, procurement, storage, treatment, transportation, and disposal

  12. SAGE FOR MACINTOSH (MSAGE) VERSION 1.0 SOLVENT ALTERNATIVES GUIDE - USER'S GUIDE

    Science.gov (United States)

    The guide provides instructions for using the Solvent Alternatives Guide (SAGE) for Macintosh, version 1.0. The guide assumes that the user is familiar with the fundamentals of operating aMacintosh personal computer under the System 7.0 (or higher) operating system. SAGE for ...

  13. SAGE FOR WINDOWS (WSAGE) VERSION 1.0 SOLVENT ALTERNATIVES GUIDE - USER'S GUIDE

    Science.gov (United States)

    The guide provides instructions for using the Solvent Alternatives Guide (SAGE) for Windows, version 1.0. The guide assumes that the user is familiar with the fundamentals of operating Windows 3.1 (or higher) on a personal computer under the DOS 5.0 (or higher) operating system. ...

  14. My fuel treatment planner: a user guide.

    Science.gov (United States)

    Robin L. Biesecker; Roger D. Fight

    2006-01-01

    My Fuel Treatment Planner (MyFTP) is a tool for calculating and displaying the financial costs and potential revenues associated with forest fuel reduction treatments. It was designed for fuel treatment planners including those with little or no background in economics, forest management, or timber sales. This guide provides the information needed to acquire, load, and...

  15. The Chaco user`s guide. Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Hendrickson, B.; Leland, R.

    1993-11-01

    Graph partitioning is a fundamental problem in many scientific settings. This document describes the capabilities and operation of Chaco, a software package designed to partition graphs. Chaco allows for recursive application of any of several different methods for finding small edge separators in weighted graphs. These methods include inertial, spectral, Kernighan-Lin and multilevel methods in addition to several simpler strategies. Each of these methods can be used to partition the graph into two, four or eight pieces at each level of recursion. In addition, the Kernighan-Lin method can be used to improve partitions generated by any of the other methods. Brief descriptions of these methods are provided, along with references to relevant literature. The user interface, input/output formats and appropriate settings for a variety of code parameters are discussed in detail, and some suggestions on algorithm selection are offered.

  16. RadCat 3.0 user guide.

    Energy Technology Data Exchange (ETDEWEB)

    Hinojosa, Daniel; Penisten, Janelle J.; Dennis, Matthew L.; Osborn, Douglas M.; Weiner, Ruth F.; Heames, Terence John; Marincel, Michelle K.

    2009-05-01

    RADTRAN is an internationally accepted program and code for calculating the risks of transporting radioactive materials. The first versions of the program, RADTRAN I and II, were developed for NUREG-0170 (USNRC, 1977), the first environmental statement on transportation of radioactive materials. RADTRAN and its associated software have undergone a number of improvements and advances consistent with improvements in both available data and computer technology. The version of RADTRAN currently bundled with RadCat is RADTRAN 6.0. This document provides a detailed discussion and a guide for the use of the RadCat 3.0 Graphical User Interface input file generator for the RADTRAN code. RadCat 3.0 integrates the newest analysis capabilities of RADTRAN 6.0 which includes an economic model, updated loss-of-lead shielding model, and unit conversion. As of this writing, the RADTRAN version in use is RADTRAN 6.0.

  17. Interactive data manipulation program. FAWTEK user guide

    International Nuclear Information System (INIS)

    Boyer, W.B.; Sauer, S.

    1980-02-01

    This report describes the interactive data acquisition and manipulation program FAWTEK.'The program allows users of the electron beam data acquisition facility to control the R7912 digitizers and to perform a variety of mathematical operations on data arrays. Commands are entered in a high level language via a Tektronix 4010 terminal console. Each command directive and associated parameters is described in detail

  18. Murt user's guide: A hybrid Lagrangian-Eulerian finite element model of multiple-pore-region solute transport through subsurface media

    International Nuclear Information System (INIS)

    Gwo, J.P.; Jardine, P.M.; Yeh, G.T.; Wilson, G.V.

    1995-04-01

    Matrix diffusion, a diffusive mass transfer process,in the structured soils and geologic units at ORNL, is believe to be an important subsurface mass transfer mechanism; it may affect off-site movement of radioactive wastes and remediation of waste disposal sites by locally exchanging wastes between soil/rock matrix and macropores/fractures. Advective mass transfer also contributes to waste movement but is largely neglected by researchers. This report presents the first documented 2-D multiregion solute transport code (MURT) that incorporates not only diffusive but also advective mass transfer and can be applied to heterogeneous porous media under transient flow conditions. In this report, theoretical background is reviewed and the derivation of multiregion solute transport equations is presented. Similar to MURF (Gwo et al. 1994), a multiregion subsurface flow code, multiplepore domains as suggested by previous investigators (eg, Wilson and Luxmoore 1988) can be implemented in MURT. Transient or steady-state flow fields of the pore domains can be either calculated by MURF or by modelers. The mass transfer process is briefly discussed through a three-pore-region multiregion solute transport mechanism. Mass transfer equations that describe mass flux across pore region interfaces are also presented and parameters needed to calculate mass transfer coefficients detailed. Three applications of MURT (tracer injection problem, sensitivity analysis of advective and diffusive mass transfer, hillslope ponding infiltration and secondary source problem) were simulated and results discussed. Program structure of MURT and functions of MURT subroutiness are discussed so that users can adapt the code; guides for input data preparation are provided in appendices

  19. A user's guide to functional diversity indices

    OpenAIRE

    Schleuter , D.; Daufresne , M.; Massol , F.; Argillier , C.

    2010-01-01

    Functional diversity is the diversity of species traits in ecosystems. This concept is increasingly used in ecological research, yet its formal definition and measurements are currently under discussion. As the overall behaviour and consistency of functional diversity indices have not been described so far, the novice user risks choosing an inaccurate index or a set of redundant indices to represent functional diversity. In our study we closely examine functional diversity indices to clari...

  20. Interactive data manipulation program FAWTEK user guide

    International Nuclear Information System (INIS)

    Boyer, W.B.

    1977-02-01

    The interactive data acquisitio and manipulation program FAWTEK is described. The program allows users of the electron beam data acquisition facility to control the R7912 digitizers and to perform a variety of mathematical operations on data arrays. Commands are entered in a high-level language via a Tektronix 4010 terminal console. Each command directive, aling with its associated parameters, is described in detail

  1. Wheelchair users: a guide for the GDP.

    Science.gov (United States)

    Ramirez, L; Dickinson, C

    2018-03-23

    The number of wheelchair users in the UK is increasing, and it may be more convenient and appropriate for many of these individuals to receive their dental care in a general dental practice rather than in a community or tertiary facility. This article is intended to provide the average general dental practitioner (GDP) with the basic tools and increased confidence to effectively triage this cohort of the population, and accept them for treatment or refer appropriately.

  2. User's guide to the MESOI diffusion model: Version 1. 1 (for Data General Eclipse S/230 with AFOS)

    Energy Technology Data Exchange (ETDEWEB)

    Athey, G.F.; Ramsdell, J.V.

    1982-09-01

    MESOI is an interactive, Langrangian puff trajectory model. The model theory is documented separately (Ramsdell and Athey, 1981). Version 1.1 is a modified form of the original 1.0. It is designed to run on a Data General Eclipse computer. The model has improved support features which make it useful as an emergency response tool. This report is intended to provide the user with the information necessary to successfully conduct model simulations using MESOI Version 1.1 and to use the support programs STAPREP and EXPLT. The user is also provided information on the use of the data file maintenance and review program UPDATE. Examples are given for the operation of the program. Test data sets are described which allow the user to practice with the programs and to confirm proper implementation and execution.

  3. Dose calibrator user and quality control guide

    International Nuclear Information System (INIS)

    Blanchis, Philippe; Amiot, Marie-Noelle; Moune, Muriel; Bellanger, Anne-Christine; Chauvenet, Bruno; Verdeau, Eric; Gardin, Isabelle; Martineau, Antoine; Ricard, Marcel; Caselles, Olivier; Guilhem, Marie-Therese; Hapdey, Sebastien; Lisbona, Albert; Bonnot-Lours, Sophie; Dumont, Agnes; Lemercier, Valerie; Rizzo-Padoin, Nathalie

    2006-06-01

    This document is a practical guide for the use and control of dose calibrators which are instruments used for radioactivity measurements. After a recall of the calibrator operation principle, the authors describe all the operations performed on this apparatus all along its lifetime: controls to be performed for device acceptance, aspects to be addressed during installation, controls to be performed before any use, daily controls, more detailed controls, and operations to be performed for maintenance, in case of dysfunctions or for re-calibration

  4. Powernext futuresTM front office user's guide

    International Nuclear Information System (INIS)

    2004-07-01

    The introduction of a power exchange in France is a direct response to the opening up of the European electricity markets. Powernext SA is a Multilateral Trading Facility in charge of managing the French power exchange through an optional and anonymous organised exchange offering: - Day-ahead contracts for the management of volume risk on Powernext Day-Ahead TM since 21 November 2001, - Medium term contracts for the management of price risk on Powernext Futures TM since 18 June 2004. This document is the front office user's guide, it presents: the market model (characteristics, regulation, contractual framework), the members (traders, clearers, quotation providers, fees structure), the products (specifications, use, liquidity and market efficiency), the trading system (architecture, hardware and software requirements, installation process and connecting to server), the trading (session, screen, sending an order, order execution). Contracts codifications and a glossary are given in the appendix. (J.S.)

  5. Development and user guide for GSI

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dong Young; Kim, Jeong Taek; Hwang, In Ku; Ham, Chang Sik; Kwon, Ki Chun

    1997-05-01

    ADIOS(Alarm Diagnosis and Integrated Operator Support) is designed to improve the operation performance of the man-machine interface system by giving dynamic alarm priority according to plant situation, and implemented with G2 real-time expert shell. It processes alarm priority in G2 using the plant data which is received from simulator, and sends the processed alarm signals to the alarm tile through TCP/IP communication link. This report includes some experiences about the GSI(G2 Standard Interface) configuration and user programming, and describes about how to build on-line ADIOS system. (author).

  6. DarcyTools, Version 2.1. User's guide

    International Nuclear Information System (INIS)

    Svensson, Urban; Ferry, Michel

    2004-03-01

    DarcyTools is a computer code for simulation of flow and transport in porous and/or fractured media. The fractured media in mind is a fractured rock and the porous media the soil cover on the top of the rock; it is hence groundwater flows, which is the class of flows in mind.The User's Guide for DarcyTools V2.1 is intended to assist new users of DarcyTools. The Guide is far from complete and it has not been the ambition to write a manual that answers all questions a user may have. The objectives of the Guide can be stated as follows: - Give an overview of the code structure and how DarcyTools is used. - Get familiar with the 'Compact Input File', which is the main way to specify input data. - Get familiar with the 'Fortran Input File', which is the more advanced way to specify input data

  7. Specialized Environmental Chamber Test Complex: User Test Planning Guide

    Science.gov (United States)

    Montz, Michael E.

    2011-01-01

    Test process, milestones and inputs are unknowns to first-time users of the Specialized Environmental Test Complex. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  8. DART 7.0 User Guide

    International Nuclear Information System (INIS)

    Enders, Alexander L.; Lousteau, Angela L.

    2016-01-01

    The Desktop Analysis Reporting Tool (DART) is a software package that allows users to easily view and analyze daily files that span long periods. DART gives users the capability to quickly determine the state of health of a radiation portal monitor (RPM), troubleshoot and diagnose problems, and view data in various time frames to perform trend analysis. In short, it converts the data strings written in the daily files into meaningful tables and plots. The standalone version of DART (''soloDART'') utilizes a database engine that is included with the application; no additional installations are necessary. There is also a networked version of DART (''polyDART'') that is designed to maximize the benefit of a centralized data repository while distributing the workload to individual desktop machines. This networked approach requires a more complex database manager Structured Query Language (SQL) Server; however, SQL Server is not currently provided with DART. Regardless of which version is used, DART will import daily files from RPMs, store the relevant data in its database, and it can produce reports for status, trend analysis, and reporting purposes.

  9. DART 7.0 User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Enders, Alexander L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lousteau, Angela L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-06-01

    The Desktop Analysis Reporting Tool (DART) is a software package that allows users to easily view and analyze daily files that span long periods. DART gives users the capability to quickly determine the state of health of a radiation portal monitor (RPM), troubleshoot and diagnose problems, and view data in various time frames to perform trend analysis. In short, it converts the data strings written in the daily files into meaningful tables and plots. The standalone version of DART (“soloDART”) utilizes a database engine that is included with the application; no additional installations are necessary. There is also a networked version of DART (“polyDART”) that is designed to maximize the benefit of a centralized data repository while distributing the workload to individual desktop machines. This networked approach requires a more complex database manager Structured Query Language (SQL) Server; however, SQL Server is not currently provided with DART. Regardless of which version is used, DART will import daily files from RPMs, store the relevant data in its database, and it can produce reports for status, trend analysis, and reporting purposes.

  10. Peridynamics with LAMMPS : a user guide.

    Energy Technology Data Exchange (ETDEWEB)

    Lehoucq, Richard B.; Silling, Stewart Andrew; Seleson, Pablo (University of Texas at Austin, Austin, TX); Plimpton, Steven James; Parks, Michael L.

    2011-11-01

    Peridynamics is a nonlocal extension of classical continuum mechanics. The discrete peridynamic model has the same computational structure as a molecular dynamics model. This document provides a brief overview of the peridynamic model of a continuum, then discusses how the peridynamic model is discretized within LAMMPS. An example problem is also included.

  11. Lunar and Planetary Webcam User's Guide

    CERN Document Server

    Mobberley, Martin

    2006-01-01

    Inexpensive webcams are revolutionizing imaging in amateur astronomy by providing an affordable alternative to cooled-chip astronomical CCD cameras, for photographing the brighter astronomical objects. Webcams – costing only a few tens of dollars – are capable of more advanced high resolution work than "normal" digital cameras because their rapid image download speed can freeze fine planetary details, even through the Earth's turbulent atmosphere. Also, their simple construction makes it easy to remove the lens, allowing them to be used at high power at the projected focus of an astronomical telescope. Webcams also connect direct to a PC, so that software can be used to "stack" multiple images, providing a stunning increase in image quality. In the Lunar and Planetary Webcam User’s Guide Martin Mobberley de-mystifies the jargon of webcams and computer processing, and provides detailed hints and tips for imaging the Sun, Moon and planets with a webcam. He looks at each observing target separately, descri...

  12. Section 8(d) Health Safety Data Reporting User Guide – Primary Support

    Science.gov (United States)

    This document presents the user guide for the Office of Pollution Prevention and Toxics (OPPT) Section 8(d) Health & Safety Data Reporting application. This document is the user guide for the Primary Support user.

  13. Code manual for MACCS2: Volume 1, user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Chanin, D.I.; Young, M.L.

    1997-03-01

    This report describes the use of the MACCS2 code. The document is primarily a user`s guide, though some model description information is included. MACCS2 represents a major enhancement of its predecessor MACCS, the MELCOR Accident Consequence Code System. MACCS, distributed by government code centers since 1990, was developed to evaluate the impacts of severe accidents at nuclear power plants on the surrounding public. The principal phenomena considered are atmospheric transport and deposition under time-variant meteorology, short- and long-term mitigative actions and exposure pathways, deterministic and stochastic health effects, and economic costs. No other U.S. code that is publicly available at present offers all these capabilities. MACCS2 was developed as a general-purpose tool applicable to diverse reactor and nonreactor facilities licensed by the Nuclear Regulatory Commission or operated by the Department of Energy or the Department of Defense. The MACCS2 package includes three primary enhancements: (1) a more flexible emergency-response model, (2) an expanded library of radionuclides, and (3) a semidynamic food-chain model. Other improvements are in the areas of phenomenological modeling and new output options. Initial installation of the code, written in FORTRAN 77, requires a 486 or higher IBM-compatible PC with 8 MB of RAM.

  14. Rad Toolbox User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Eckerman, Keith F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sjoreen, Andrea L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2013-05-01

    The Radiological Toolbox software developed by Oak Ridge National Laboratory (ORNL) for U. S. Nuclear Regulatory Commission (NRC) is designed to provide electronic access to the vast and varied data that underlies the field of radiation protection. These data represent physical, chemical, anatomical, physiological, and mathematical parameters detailed in various handbooks which a health physicist might consult while in his office. The initial motivation for the software was to serve the needs of the health physicist away from his office and without access to his handbooks; e.g., NRC inspectors. The earlier releases of the software were widely used and accepted around the world by not only practicing health physicist but also those within educational programs. This release updates the software to accommodate changes in Windows operating systems and, in some aspects, radiation protection. This release has been tested on Windows 7 and 8 and on 32- and 64-bit machines. The nuclear decay data has been updated and thermal neutron capture cross sections and cancer risk coefficients have been included. This document and the software’s user’s guide provide further details and documentation of the information captured within the Radiological Toolbox.

  15. WOFOST 7.1; user's guide for the WOFOST 7.1 crop growth simulation model and WOFOST Control Center 1.5

    NARCIS (Netherlands)

    Boogaard, H.L.; Diepen, van C.A.; Rotter, R.P.; Cabrera, J.M.C.A.; Laar, van H.H.

    1998-01-01

    WOFOST version 7.1 is a computer model that simulates the growth and production of annual field crops. All the run options are operational through a graphical user interface named WOFOST Control Center version 1.5 (WCC). WCC facilitates selecting the production level, and input data sets on crop,

  16. TRIPOLI-4R Version 8 User Guide

    International Nuclear Information System (INIS)

    Brun, Emeric; Damian, Frederic; Dumonteil, Eric; Hugot, Francois-Xavier; Lee, Yi-Kang; Malvagi, Fausto; Mazzolo, Alain; Petit, Odile; Trama, Jean-Christophe; Visonneau, Thierry; Zoia, Andrea

    2013-02-01

    TRIPOLI-4 R solves the linear Boltzmann equation for neutrons, photons, electrons and positrons, with the Monte Carlo method, in any 3D geometry. The code uses ENDF format continuous energy cross-sections, from various international evaluations including JEFF-3.1.1, ENDF/B-VII.0, JENDL4 and FENDL2.1. Its official nuclear data library for applications, named CEAV5.1.1, is mainly based on the European evaluation JEFF-3.1.1. TRIPOLI-4 R solves fixed source as well as eigenvalue problems. It has advanced variance reduction methods to address deep penetration issues. Thanks to its robust and efficient parallelism capability, calculations are easily performed on multi-core single units, heterogeneous networks of workstations and massively parallel machines. Additional productivity tools, graphical as well as algorithmic, allow the user to efficiently set its input decks. With its large V and V data base, TRIPOLI-4 R is used as a reference code for industrial purposes, as well as a R and D and teaching tool, for radiation protection and shielding, core physics, nuclear criticality-safety and nuclear instrumentation. TRIPOLI-4 R is a registered trademark of CEA. (authors)

  17. PCGAP: Users Guide and Algorithm Description

    Energy Technology Data Exchange (ETDEWEB)

    Killian, Elmo Wayne

    2000-06-01

    PCGAP is a software package, which was written to provide gamma-ray pulse height spectrum analysis on a personal computer platform using the Windows NT operating system. It is a collection of programs, which provide a wide range of operability extending from the single user environment to the general purpose counting room. Included in the package are necessary data structures and libraries used to compute quantitative radionuclide concentrations. PCGAP also contains techniques to decontaminate photopeak interferences; determine activity concentrations for radionuclides independent of their associated spectral photopeak size; and three methods to determine the energy scale of a spectrum. PCGAP performs a non-linear least squares fitting of a Gaussian function to spectral photopeaks. The fitting algorithm can fit up to five concurrent photopeaks using a common spectral background. The package includes a program that will automatically locate spectral photopeaks, fit them to a Gaussian function, identify the radionuclides associated with the found photopeaks, and compute a net activity concentration, and for an 8K spectrum do it in less than 30 seconds on a reasonably configured PC. PCGAP also includes a program which allows the operator to manually (using mouse clicks) identify photopeak locations, fit limits and background positions, initiate a fit to the photopeaks and then display the resulting Gaussian function forms. This interactive display function is particularly useful to resolve or properly fit photopeaks with complex adjacent structure and for photopeaks that are near the limit of detection.

  18. PCGAP: Users Guide and Algorithm Description

    Energy Technology Data Exchange (ETDEWEB)

    Killian, E.W.; Hartwell, J.K.

    2000-09-30

    PCGAP is a software package, which was written to provide gamma-ray pulse height spectrum analysis on a personal computer platform using the Windows NT operating system. It is a collection of programs, which provide a wide range of operability extending from the single user environment to the general purpose counting room. Included in the package are necessary data structures and libraries used to compute quantitative radionuclide concentrations. PCGAP also contains techniques to decontaminate photopeak interferences; determine activity concentrations for radionuclides independent of their associated spectral photopeak size; and three methods to determine the energy scale of a spectrum. PCGAP performs a non-linear least squares fitting of a Gaussian function to spectral photopeaks. The fitting algorithm can fit up to five concurrent photopeaks using a common spectral background. The package includes a program that will automatically locate spectral photopeaks, fit them to a Gaussian fu nction, identify the radionuclides associated with the found photopeaks, and compute a net activity concentration, and for an 8K spectrum do it in less than 30 seconds on a reasonably configured PC. PCGAP also includes a program which allows the operator to manually (using mouse clicks) identify photopeak locations, fit limits and background positions, initiate a fit to the photopeaks and then display the resulting Gaussian function forms. This interactive display function is particularly useful to resolve or properly fit photopeaks with complex adjacent structure and for photopeaks that are near the limit of detection.

  19. HTGR Application Economic Model Users' Manual

    International Nuclear Information System (INIS)

    Gandrik, A.M.

    2012-01-01

    The High Temperature Gas-Cooled Reactor (HTGR) Application Economic Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Application Economic Model calculates either the required selling price of power and/or heat for a given internal rate of return (IRR) or the IRR for power and/or heat being sold at the market price. The user can generate these economic results for a range of reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for up to 16 reactor modules; and for module ratings of 200, 350, or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Application Economic Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Application Economic Model. This model was designed for users who are familiar with the HTGR design and Excel and engineering economics. Modification of the HTGR Application Economic Model should only be performed by users familiar with the HTGR and its applications, Excel, and Visual Basic.

  20. HTGR Cost Model Users' Manual

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooler Reactor (HTGR) Cost Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Cost Model calculates an estimate of the capital costs, annual operating and maintenance costs, and decommissioning costs for a high-temperature gas-cooled reactor. The user can generate these costs for multiple reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for a single or four-pack configuration; and for a reactor size of 350 or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Cost Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Cost Model. This model was design for users who are familiar with the HTGR design and Excel. Modification of the HTGR Cost Model should only be performed by users familiar with Excel and Visual Basic.

  1. Understanding your users a practical guide to user requirements methods, tools, and techniques

    CERN Document Server

    Baxter, Kathy

    2005-01-01

    Today many companies are employing a user-centered design (UCD) process, but for most companies, usability begins and ends with the usability test. Although usability testing is a critical part of an effective user-centered life cycle, it is only one component of the UCD process. This book is focused on the requirements gathering stage, which often receives less attention than usability testing, but is equally as important. Understanding user requirements is critical to the development of a successful product. Understanding Your Users is an easy to read, easy to implement, how-to guide on

  2. SIMPPLLE, version 2.5 user's guide

    Science.gov (United States)

    Jimmie D. Chew; Kirk Moeller; Christine Stalling

    2012-01-01

    SIMPPLLE is a spatially-interactive, dynamic landscape modeling system for projecting temporal changes in the spatial distribution of vegetation in response to insects, disease, wildland fire, and other natural and management-caused disturbances. SIMPPLLE is designed to provide a balance between incorporating enough complexity and interactions in modeling ecosystem...

  3. SIMGRO 4.1.2; user's guide

    NARCIS (Netherlands)

    Dik, P.E.

    2004-01-01

    The regional hydrologic model SIMGRO is used for investigating various kinds of water management problems, specifically those where the interaction between groundwater and surface waters plays a crucial role. This manual contains comprehensive information regarding the way theoretical concepts

  4. Turbsim User's Guide: Version 1.50

    Energy Technology Data Exchange (ETDEWEB)

    Jonkman, B. J.

    2009-09-01

    This report is a user's guide for the TurbSim code. TurbSim stochastic inflow turbulence code is a wind turbine design code that simulates a full-field flow containing coherent turbulence associated with nocturnal boundary layer flows.

  5. A User's Guide to the Federal Theater Project.

    Science.gov (United States)

    Sheridan, Frank; Leslie, Linda

    1997-01-01

    Presents a lesson plan constructed around materials found in the User's Guide to the Federal Project. The Federal Theater Project produced radical and populist plays during the Great Depression before being de-funded by a conservative Congress. The lessons include activities and discussion built around the original plays. (MJP)

  6. Basic user guide for the radwaste treatment plant computer system

    International Nuclear Information System (INIS)

    Keel, A.

    1990-07-01

    This guide has been produced as an aid to using the Radwaste Treatment Plant computer system. It is designed to help new users to use the database menu system. Some of the forms can be used in ways different from those explained and more complex queries can be performed. (UK)

  7. Code manual for MACCS2: Volume 1, user's guide

    International Nuclear Information System (INIS)

    Chanin, D.I.; Young, M.L.

    1997-03-01

    This report describes the use of the MACCS2 code. The document is primarily a user's guide, though some model description information is included. MACCS2 represents a major enhancement of its predecessor MACCS, the MELCOR Accident Consequence Code System. MACCS, distributed by government code centers since 1990, was developed to evaluate the impacts of severe accidents at nuclear power plants on the surrounding public. The principal phenomena considered are atmospheric transport and deposition under time-variant meteorology, short- and long-term mitigative actions and exposure pathways, deterministic and stochastic health effects, and economic costs. No other U.S. code that is publicly available at present offers all these capabilities. MACCS2 was developed as a general-purpose tool applicable to diverse reactor and nonreactor facilities licensed by the Nuclear Regulatory Commission or operated by the Department of Energy or the Department of Defense. The MACCS2 package includes three primary enhancements: (1) a more flexible emergency-response model, (2) an expanded library of radionuclides, and (3) a semidynamic food-chain model. Other improvements are in the areas of phenomenological modeling and new output options. Initial installation of the code, written in FORTRAN 77, requires a 486 or higher IBM-compatible PC with 8 MB of RAM

  8. Mental models and user training

    Directory of Open Access Journals (Sweden)

    Saša Zupanič

    1997-01-01

    Full Text Available One of the functions of the reference service is user training which means teaching users how to use the library and it's information sorces (nowadays mainly computerized systems. While the scientific understanding of teaching/learning process is shifting, changes also affect the methods of user training in libraries.Human-computer interaction (HCI is an interdisciplinary and a very active research area which studies how humans use computers - their mental and behavioral characteristics. The application of psychological theories to HCI are especially great on three areas: psychological (mental, conceptual models, individual differences, and error behavior.The mental models theory is powerful tool for understanding the ways in which users interact with an information system. Claims, based on this theory can affect the methods (conceptualization of user training and the overall design of information systems.

  9. SIMGRO 4.1.2; user's guide

    OpenAIRE

    Dik, P.E.

    2004-01-01

    The regional hydrologic model SIMGRO is used for investigating various kinds of water management problems, specifically those where the interaction between groundwater and surface waters plays a crucial role. This manual contains comprehensive information regarding the way theoretical concepts relate to practical water management issues, technical features of the modules, installation, program use and error handling

  10. EnKF-C user guide

    OpenAIRE

    Sakov, Pavel

    2014-01-01

    EnKF-C provides a compact generic framework for off-line data assimilation into large-scale layered geophysical models with the ensemble Kalman filter (EnKF). It is coded in C for GNU/Linux platform and can work either in EnKF or ensemble optimal interpolation (EnOI) mode.

  11. Java PathFinder User Guide

    Science.gov (United States)

    Havelund, Klaus

    1999-01-01

    The JAVA PATHFINDER, JPF, is a translator from a subset of JAVA 1.0 to PROMELA, the programming language of the SPIN model checker. The purpose of JPF is to establish a framework for verification and debugging of JAVA programming based on model checking. The main goal is to automate program verification such that a programmer can apply it in the daily work without the need for a specialist to manually reformulate a program into a different notation in order to analyze the program. The system is especially suited for analyzing multi-threaded JAVA applications, where normal testing usually falls short. The system can find deadlocks and violations of boolean assertions stated by the programmer in a special assertion language. This document explains how to Use JPF.

  12. ORA User’s Guide 2009

    Science.gov (United States)

    2009-05-01

    Detects potential errors in agent to agent interactions based on the expected interactions from cognitive similarity and expertise. QAP Analysis...Computes QAP Correlation and Regression (Dekker and Y-Permutation methods) on input matrices. QAP is designed as a bivariate test (only two variables...Generally, QAP is perfectly fine for almost any bivariate network problem. Semantic Network - Analyzes one or more mental map models, computing the

  13. A User Guide to PARET/ANL

    Energy Technology Data Exchange (ETDEWEB)

    Olson, A. P. [Argonne National Lab. (ANL), Argonne, IL (United States); Dionne, B. [Argonne National Lab. (ANL), Argonne, IL (United States); Marin-Lafleche, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Kalimullah, M. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-01-01

    PARET was originally created in 1969 at what is now Idaho National Laboratory (INL), to analyze reactivity insertion events in research and test reactor cores cooled by light or heavy water, with fuel composed of either plates or pins. The use of PARET is also appropriate for fuel assemblies with curved fuel plates when their radii of curvatures are large with respect to the fuel plate thickness. The PARET/ANL version of the code has been developed at Argonne National Laboratory (ANL) under the sponsorship of the U.S. Department of Energy/NNSA, and has been used by the Reactor Conversion Program to determine the expected transient behavior of a large number of reactors. PARET/ANL models the various fueled regions of a reactor core as channels. Each of these channels consists of a single flat fuel plate/pin (including cladding and, optionally, a gap) with water coolant on each side. In slab geometry the coolant channels for a given fuel plate are of identical dimensions (mirror symmetry), but they can be of different thickness in each channel. There can be many channels, but each channel is independent and coupled only through reactivity feedback effects to the whole core. The time-dependent differential equations that represent the system are replaced by an equivalent set of finite-difference equations in space and time, which are integrated numerically. PARET/ANL uses fundamentally the same numerical scheme as RELAP5 for the time-integration of the point-kinetics equations. The one-dimensional thermal-hydraulic model includes temperature-dependent thermal properties of the solid materials, such as heat capacity and thermal conductivity, as well as the transient heat production and heat transfer from the fuel meat to the coolant. Temperature- and pressure-dependent thermal properties of the coolant such as enthalpy, density, thermal conductivity, and viscosity are also used in determining parameters such as friction factors and heat transfer coefficients. The code

  14. Unobtrusive user modeling for adaptive hypermedia

    NARCIS (Netherlands)

    Holz, H.J.; Hofmann, K.; Reed, C.; Uchyigit, G.; Ma, M.Y.

    2008-01-01

    We propose a technique for user modeling in Adaptive Hypermedia (AH) that is unobtrusive at both the level of observable behavior and that of cognition. Unobtrusive user modeling is complementary to transparent user modeling. Unobtrusive user modeling induces user models appropriate for Educational

  15. In-circuit fault injector user's guide

    Science.gov (United States)

    Padilla, Peter A.

    1987-06-01

    A fault injector system, called an in-circuit injector, was designed and developed to facilitate fault injection experiments performed at NASA-Langley's Avionics Integration Research Lab (AIRLAB). The in-circuit fault injector (ICFI) allows fault injections to be performed on electronic systems without special test features, e.g., sockets. The system supports stuck-at-zero, stuck-at-one, and transient fault models. The ICFI system is interfaced to a VAX-11/750 minicomputer. An interface program has been developed in the VAX. The computer code required to access the interface program is presented. Also presented is the connection procedure to be followed to connect the ICFI system to a circuit under test and the ICFI front panel controls which allow manual control of fault injections.

  16. The SWAN coupling code: user's guide

    International Nuclear Information System (INIS)

    Litaudon, X.; Moreau, D.

    1988-11-01

    Coupling of slow waves in a plasma near the lower hybrid frequency is well known and linear theory with density step followed by a constant gradient can be used with some confidence. With the aid of the computer code SWAN, which stands for 'Slow Wave Antenna', the following parameters can be numerically calculated: n parallel power spectrum, directivity (weighted by the current drive efficiency), reflection coefficients (amplitude and phase) both before and after the E-plane junctions, scattering matrix at the plasma interface, scattering matrix at the E-plane junctions, maximum electric fields in secondary waveguides and location where it occurs, effect of passive waveguides on each side of the antenna, and the effect of a finite magnetic field in front of the antenna (for homogeneous plasma). This manual gives the basic information on the main assumptions of the coupling theory and on the use and general structure of the code itself. It answers the questions what are the main assumptions of the physical model? how to execute a job? what are the input parameters of the code? and what are the output results and where are they written? (author)

  17. User`s Guide for the NREL Force and Loads Analysis Program. Version 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A D

    1992-08-01

    The following report gives the reader an overview of and instructions on the proper use of the National Renewable Energy Laboratory Force and Loads Analysis Program (FLAP, version 2.2). It is intended as a tool for prediction of rotor and blade loads and response for two- or three-bladed rigid hub wind turbines. The effects of turbulence are accounted for. The objectives of the report are to give an overview of the code and also show the methods of data input and correct code execution steps in order to model an example two-bladed rigid hub turbine. A large portion of the discussion (Sections 6.0, 7.0, and 8.0) is devoted to the subject of inputting and running the code for wind turbulence effects. The ability to include turbulent wind effects is perhaps the biggest change in the code since the release of FLAP version 2.01 in 1988. This report is intended to be a user`s guide. It does not contain a theoretical discussion on equations of motion, assumptions, underlying theory, etc. It is intended to be used in conjunction with Wright, Buhl, and Thresher (1988).

  18. Users guide to the inelastic rotor spectrometer (IRS)

    International Nuclear Information System (INIS)

    Bunce, L.J.

    1987-11-01

    The paper is a users guide to the inelastic rotor spectrometer installed on the Harwell 136 Mev electron linear accelerator HELIOS. The spectrometer is designed to measure neutron inelastic scattering for energy transfers from 50 meV to 400 meV and covering a range of Q values from 1 to 15 A 0-1 . The guide contains a description of:- time-of-flight scales, run and sample changer control units, sample environment, detectors, rotor system, 600 Hz operation of rotor, a run, and data processing. (U.K.)

  19. AVS user's guide on the basis of practice

    International Nuclear Information System (INIS)

    Masuko, Kenji; Kato, Katsumi; Kume, Etsuo; Fujii, Minoru.

    1997-07-01

    The special guides for the use of visualization software AVS have been developed at Japan Atomic Energy Research Institute (JAERI). The purpose of these guides is to help the AVS users understand easily the use of the one, due to the fact that it is so difficult for beginners to understand the original manuals. In this report, 'Transportation Evacuation Simulation' is taken up as an object of visualization, and the procedure of visualization and images recording by using the AVS are described. By using the AVS according to this report, a series of the procedure which are necessary for use of the AVS can be acquired. (author)

  20. Security for small computer systems a practical guide for users

    CERN Document Server

    Saddington, Tricia

    1988-01-01

    Security for Small Computer Systems: A Practical Guide for Users is a guidebook for security concerns for small computers. The book provides security advice for the end-users of small computers in different aspects of computing security. Chapter 1 discusses the security and threats, and Chapter 2 covers the physical aspect of computer security. The text also talks about the protection of data, and then deals with the defenses against fraud. Survival planning and risk assessment are also encompassed. The last chapter tackles security management from an organizational perspective. The bo

  1. Aviation System Analysis Capability Quick Response System Report Server User's Guide

    Science.gov (United States)

    Roberts, Eileen R.; Villani, James A.; Wingrove, Earl R., III

    1996-01-01

    This report is a user's guide for the Aviation System Analysis Capability Quick Response System (ASAC QRS) Report Server. The ASAC QRS is an automated online capability to access selected ASAC models and data repositories. It supports analysis by the aviation community. This system was designed by the Logistics Management Institute for the NASA Ames Research Center. The ASAC QRS Report Server allows users to obtain information stored in the ASAC Data Repositories.

  2. LAPACK users' guide: Release 1. 0

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, E.; Bai, Z.; Bischof, C.; Demmel, J.; Dongarra, J.; Du Croz, J.; Greenbaum, A.; Hammarling, S.; McKenney, A.; Ostrouchov, S.; Sorensen, D.

    1992-01-31

    LAPACK is a transportable library of Fortran 77 subroutines for solving the most common problems in numerical linear algebra: systems of linear equations, linear least squares problems, eigenvalue problems and singular value problems. LAPACK is designed to supersede LINPACK and EISPACK, principally by restructuring the software to achieve much greater efficiency on vector processors, high-performance superscalar'' workstations, and shared-memory multi-processors. LAPACK also adds extra functionality, uses some new or improved algorithms, and integrates the two sets of algorithms into a unified package. The LAPACK Users' Guide gives an informal introduction to the design of the algorithms and software, summarizes the contents of the package, describes conventions used in the software and documentation, and includes complete specifications for calling the routines. This edition of the Users' guide describes Release 1.0 of LAPACK.

  3. PMU Data Event Detection: A User Guide for Power Engineers

    Energy Technology Data Exchange (ETDEWEB)

    Allen, A.; Singh, M.; Muljadi, E.; Santoso, S.

    2014-10-01

    This user guide is intended to accompany a software package containing a Matrix Laboratory (MATLAB) script and related functions for processing phasor measurement unit (PMU) data. This package and guide have been developed by the National Renewable Energy Laboratory and the University of Texas at Austin. The objective of this data processing exercise is to discover events in the vast quantities of data collected by PMUs. This document attempts to cover some of the theory behind processing the data to isolate events as well as the functioning of the MATLAB scripts. The report describes (1) the algorithms and mathematical background that the accompanying MATLAB codes use to detect events in PMU data and (2) the inputs required from the user and the outputs generated by the scripts.

  4. Miro V4.0: user's guide; Miro V4.0: guide utilisateur

    Energy Technology Data Exchange (ETDEWEB)

    Morice, O.; Ribeyre, X. [CEA/CESTA, Dept. des Lasers de Puissance, DLP, 33 - Le Barp (France); Donnat, Ph.; Porcher, Th.; Treimany, C. [CEA/CESTA, DCSA/MLS, 33 - Le Barp (France); Nassiet, D.; Gallice, G. [CEA/CESTA, DEV/SIS, 33 - Le Barp (France); Rivoire, V.; L' hullier, N. [CISI, 33 (France)

    2000-07-01

    This paper contains the user's guide of Miro software. This software is used for simulating propagation and amplification of laser beams in laser devices as Megajoule or NIF. The physical effects taken into account are essentially: saturated amplification, absorption, Kerr effect, frequency conversion, birefringence and aberrations. The models of propagation are either geometrical optics of parallel beams, or Fresnel diffraction and broadband pulse propagation. A graphic user interface has been included to allow interactive management of optical devices and results. A Unix environment with X-Window and Motif or a Windows 95, Windows 98 or Windows NT environment is required to run Miro. The User's guide gives a short insight of the software. (authors)

  5. RadCat 2.0 User Guide.

    Energy Technology Data Exchange (ETDEWEB)

    Osborn, Douglas.; Weiner, Ruth F.; Mills, George Scott; Hamp, Steve C.; O' Donnell, Brandon, M.; Orcutt, David J.; Heames, Terence J.; Hinojosa, Daniel

    2005-01-01

    This document provides a detailed discussion and a guide for the use of the RadCat 2.0 Graphical User Interface input file generator for the RADTRAN 5.5 code. The differences between RadCat 2.0 and RadCat 1.0 can be attributed to the differences between RADTRAN 5 and RADTRAN 5.5 as well as clarification for some of the input parameters. 3

  6. Powernext futuresTM back office user's guide

    International Nuclear Information System (INIS)

    2005-05-01

    The introduction of a power exchange in France is a direct response to the opening up of the European electricity markets. Powernext SA is a Multilateral Trading Facility in charge of managing the French power exchange through an optional and anonymous organised exchange offering: - Day-ahead contracts for the management of volume risk on Powernext Day-Ahead TM since 21 November 2001, - Medium term contracts for the management of price risk on Powernext Futures TM since 18 June 2004. This document is the back office user's guide, it presents: the market model (specifications, regulation, legal framework), the members (traders, clearers, quotation providers, fees structure), the products (specifications, use, liquidity and market efficiency), the clearing (recording transactions, risk management before delivery period, last settlement of contracts, risk management during delivery, additional margin, examples, default management), the LCH.Clearnet Ltd clearing system (hardware and software requirements, setup of the VPN client software, functionalities, market information disclosure), the delivery (nomination, file characteristics and transmission), the payment (financial flows, eligible assets provided to cover margin requirements). ECS reports, treasury documents, contracts codification, FTP server arborescence, latent and carried-out margins and a glossary are given in the appendix. (J.S.)

  7. EFDC1D - A ONE DIMENSIONAL HYDRODYNAMIC AND SEDIMENT TRANSPORT MODEL FOR RIVER AND STREAM NETWORKS: MODEL THEORY AND USERS GUIDE

    Science.gov (United States)

    This technical report describes the new one-dimensional (1D) hydrodynamic and sediment transport model EFDC1D. This model that can be applied to stream networks. The model code and two sample data sets are included on the distribution CD. EFDC1D can simulate bi-directional unstea...

  8. Models accounting for intention-behavior discordance in the physical activity domain: a user's guide, content overview, and review of current evidence.

    Science.gov (United States)

    Rhodes, Ryan E; Yao, Christopher A

    2015-02-07

    There is a growing concern among researchers with the limited effectiveness and yet subsequent stagnation of theories applied to physical activity (PA). One of the most highlighted areas of concern is the established gap between intention and PA, yet the considerable use of models that assume intention is the proximal antecedent of PA. The objective of this review was to: 1) provide a guide and thematic analysis of the available models that include constructs that address intention-behavior discordance and 2) highlight the evidence for these structures in the PA domain. A literature search was conducted among 13 major databases to locate relevant models and PA studies published before August 2014. Sixteen models were identified and nine overall themes for post-intentional constructs were created. Of the 16 models, eight were applied to 36 PA studies. Early evidence supported maintenance self-efficacy, behavioral regulation strategies, affective judgments, perceived control/opportunity, habit, and extraversion as reliable predictors of post-intention PA. Several intention-behavior discordance models exist within the literature, but are not used frequently. Further efforts are needed to test these models, preferably with experimental designs.

  9. A buyer's and user's guide to astronomical telescopes & binoculars

    CERN Document Server

    Mullaney, James

    2007-01-01

    This exciting, upbeat new guide provides an extensive overview of binoculars and telescopes. It includes detailed up-to-date information on sources, selection and use of virtually every major type, brand and model of such instruments on today's market.

  10. SAPHIRE 8 Volume 3 - Users' Guide

    Energy Technology Data Exchange (ETDEWEB)

    C. L. Smith; K. Vedros; K. J. Kvarfordt

    2011-03-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer. SAPHIRE is funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory (INL). The INL's primary role in this project is that of software developer. However, the INL also plays an important role in technology transfer by interfacing and supporting SAPHIRE users comprised of a wide range of PRA practitioners from the NRC, national laboratories, the private sector, and foreign countries. SAPHIRE can be used to model a complex system’s response to initiating events, quantify associated damage outcome frequencies, and identify important contributors to this damage (Level 1 PRA) and to analyze containment performance during a severe accident and quantify radioactive releases (Level 2 PRA). It can be used for a PRA evaluating a variety of operating conditions, for example, for a nuclear reactor at full power, low power, or at shutdown conditions. Furthermore, SAPHIRE can be used to analyze both internal and external initiating events and has special features for transforming models built for internal event analysis to models for external event analysis. It can also be used in a limited manner to quantify risk in terms of release consequences to both the public and the environment (Level 3 PRA). This reference guide will introduce the SAPHIRE Version 8.0 software. A brief discussion of the purpose and history of the software is included along with general information such as installation instructions, starting and stopping the program, and some pointers on how to get around inside the program. Next, database concepts and structure are discussed. Following that discussion are nine sections, one for each of the menu options on the SAPHIRE main menu, wherein the purpose and general capabilities for each option are

  11. CalTOX (registered trademark), A multimedia total exposure model spreadsheet user's guide. Version 4.0(Beta)

    Energy Technology Data Exchange (ETDEWEB)

    McKone, T.E.; Enoch, K.G.

    2002-08-01

    CalTOX has been developed as a set of spreadsheet models and spreadsheet data sets to assist in assessing human exposures from continuous releases to multiple environmental media, i.e. air, soil, and water. It has also been used for waste classification and for setting soil clean-up levels at uncontrolled hazardous wastes sites. The modeling components of CalTOX include a multimedia transport and transformation model, multi-pathway exposure scenario models, and add-ins to quantify and evaluate uncertainty and variability. All parameter values used as inputs to CalTOX are distributions, described in terms of mean values and a coefficient of variation, rather than as point estimates or plausible upper values such as most other models employ. This probabilistic approach allows both sensitivity and uncertainty analyses to be directly incorporated into the model operation. This manual provides CalTOX users with a brief overview of the CalTOX spreadsheet model and provides instructions for using the spreadsheet to make deterministic and probabilistic calculations of source-dose-risk relationships.

  12. SHEDS-Multimedia Model Version 3 (a) Technical Manual; (b) User Guide; and (c) Executable File to Launch SAS Program and Install Model

    Science.gov (United States)

    Reliable models for assessing human exposures are important for understanding health risks from chemicals. The Stochastic Human Exposure and Dose Simulation model for multimedia, multi-route/pathway chemicals (SHEDS-Multimedia), developed by EPA’s Office of Research and Developm...

  13. TOUGH2 User's Guide Version 2

    Energy Technology Data Exchange (ETDEWEB)

    Pruess, K.; Oldenburg, C.M.; Moridis, G.J.

    1999-11-01

    TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, and unsaturated and saturated zone hydrology. TOUGH2 was first released to the public in 1991; the 1991 code was updated in 1994 when a set of preconditioned conjugate gradient solvers was added to allow a more efficient solution of large problems. The current Version 2.0 features several new fluid property modules and offers enhanced process modeling capabilities, such as coupled reservoir-wellbore flow, precipitation and dissolution effects, and multiphase diffusion. Numerous improvements in previously released modules have been made and new user features have been added, such as enhanced linear equation solvers, and writing of graphics files. The T2VOC module for three-phase flows of water, air and a volatile organic chemical (VOC), and the T2DM module for hydrodynamic dispersion in 2-D flow systems have been integrated into the overall structure of the code and are included in the Version 2.0 package. Data inputs are upwardly compatible with the previous version. Coding changes were generally kept to a minimum, and were only made as needed to achieve the additional functionalities desired. TOUGH2 is written in standard FORTRAN77 and can be run on any platform, such as workstations, PCs, Macintosh, mainframe and supercomputers, for which appropriate FORTRAN compilers are available. This report is a self-contained guide to application of TOUGH2 to subsurface flow problems. It gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used. Illustrative sample problems are presented along with detailed instructions for preparing input data.

  14. Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide

    Science.gov (United States)

    Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.

    1993-01-01

    example problem, and compares the results to related NTP engine system designs. Initial installation instructions and program disks are in Volume 2 of the NESS Program User's Guide.

  15. Guiding Users to Sea Level Change Data Through Content

    Science.gov (United States)

    Quach, N.; Abercrombie, S. P.; Boening, C.; Brennan, H. P.; Gill, K. M.; Greguska, F. R., III; Huang, T.; Jackson, R.; Larour, E. Y.; Shaftel, H.; Tenenbaum, L. F.; Zlotnicki, V.; Boeck, A.; Moore, B.; Moore, J.

    2017-12-01

    The NASA Sea Level Change Portal (https://sealevel.nasa.gov) is an immersive and innovative web portal for sea level change research that addresses the needs of diverse audiences, from scientists across disparate disciplines to the general public to policy makers and businesses. Since sea level change research involves vast amounts of data from multiple fields, it becomes increasingly important to come up with novel and effective ways to guide users to the data they need. News articles published on the portal contains links to relevant data. The Missions section highlights missions and projects as well as provide a logical grouping of the data. Tools available on the portal, such as the Data Analysis Tool, a data visualization and high-performance environment for sea level analysis, and the Virtual Earth System Laboratory, a 3D simulation application, describes and links to the source data. With over 30K Facebook followers and over 23K Twitter follower, the portal outreach team also leverages social media to guide users to relevant data. This presentation focuses on how the portal uses news articles, mission and project pages, tools, and social media to connect users to the data.

  16. Modeling of complex melting and solidification behavior in laser-irradiated materials [a description and users guide to the LASER8 computer program

    International Nuclear Information System (INIS)

    Geist, G.A.; Wood, R.F.

    1985-11-01

    The conceptual foundation of a computational model and a computer program based on it have been developed for treating various aspects of the complex melting and solidification behavior observed in pulsed laser-irradiated materials. A particularly important feature of the modeling is the capability of allowing melting and solidification to occur at temperatures other than the thermodynamic phase change temperatures. As a result, interfacial undercooling and overheating can be introduced and various types of nucleation events can be simulated. Calculations on silicon with the model have shown a wide variety of behavior, including the formation and propagation of multiple phase fronts. Although originally developed as a tool for studying certain problems arising in the field of laser annealing of semiconductors, the program should be useful in treating many types of systems in which phase changes and nucleation phenomena play important roles. This report describes the underlying physical and mathematical ideas and the basic relations used in LASER8. It also provides enough specific and detailed information on the program to serve as a guide for its use; a listing of one version of the program is given

  17. USERS MANUAL: LANDFILL GAS EMISSIONS MODEL - VERSION 2.0

    Science.gov (United States)

    The document is a user's guide for a computer model, Version 2.0 of the Landfill Gas Emissions Model (LandGEM), for estimating air pollution emissions from municipal solid waste (MSW) landfills. The model can be used to estimate emission rates for methane, carbon dioxide, nonmet...

  18. Application for TJ-II Signals Visualization: User's Guide

    International Nuclear Information System (INIS)

    Sanchez, E.; Portas, A. B.; Cremy, C.; Vega, J.

    2000-01-01

    In this documents are described the functionalities of the application developed by the Data Acquisition Group for TJ-II signal visualization. There are two versions of the application, the On-line version, used for signal visualization during TJ-II operation, and the Off-line version, used for signal visualization without TJ-II operation. Both versions of the application consist in a graphical user interface developed for X/Motif, in which most of the actions can be done using the mouse buttons. The functionalities of both versions of the application are described in this user's guide, beginning at the application start-up and explaining in detail all the options that it provides and the actions that can be done with each graphic control. (Author) 8 refs

  19. User's guide to the repository intrusion risk evaluation code INTRUDE

    International Nuclear Information System (INIS)

    Nancarrow, D.J.; Thorne, M.C.

    1986-05-01

    The report, commissioned by the Department of the Environment as part of its radioactive waste management research programme, constitutes the user's guide to the repository intrusion risk evaluation code INTRUDE. It provides an explanation of the mathematical basis of the code, the database used and the operation of the code. INTRUDE is designed to facilitate the estimation of individual risks arising from the possibility of intrusion into shallow land burial facilities for radioactive wastes. It considers a comprehensive inventory of up to 65 long-lived radionuclides and produces risk estimates for up to 20 modes of intrusion and up to 50 times of evaluation. (author)

  20. User's guide to the radionuclide inventory and hazard code INVENT

    International Nuclear Information System (INIS)

    Nancarrow, D.J.; Thorne, M.C.

    1986-05-01

    This report constitutes the user's guide to the radionuclide inventory and hazard index code INVENT and provides an explanation of the mathematical basis of the code, the database used and operation of the code. INVENT was designed to facilitate the post-closure radiological assessment of land-based repositories for low and intermediate-level wastes. For those radionuclides identified to be of potential significance, it allows the calculation of time-dependent radionuclide activities, hazard indices for both inhalation and ingestion of activity, and photon spectra. (author)

  1. EQ6, a computer program for reaction path modeling of aqueous geochemical systems: Theoretical manual, user's guide, and related documentation (Version 7.0)

    International Nuclear Information System (INIS)

    Wolery, T.J.; Daveler, S.A.

    1992-01-01

    EQ6 is a FORTRAN computer program in the EQ3/6 software package (Wolery, 1979). It calculates reaction paths (chemical evolution) in reacting water-rock and water-rock-waste systems. Speciation in aqueous solution is an integral part of these calculations. EQ6 computes models of titration processes (including fluid mixing), irreversible reaction in closed systems, irreversible reaction in some simple kinds of open systems, and heating or cooling processes, as well as solve ''single-point'' thermodynamic equilibrium problems. A reaction path calculation normally involves a sequence of thermodynamic equilibrium calculations. Chemical evolution is driven by a set of irreversible reactions (i.e., reactions out of equilibrium) and/or changes in temperature and/or pressure. These irreversible reactions usually represent the dissolution or precipitation of minerals or other solids. The code computes the appearance and disappearance of phases in solubility equilibrium with the water. It finds the identities of these phases automatically. The user may specify which potential phases are allowed to form and which are not. There is an option to fix the fugacities of specified gas species, simulating contact with a large external reservoir. Rate laws for irreversible reactions may be either relative rates or actual rates. If any actual rates are used, the calculation has a time frame. Several forms for actual rate laws are programmed into the code. EQ6 is presently able to model both mineral dissolution and growth kinetics

  2. Model Manipulation for End-User Modelers

    DEFF Research Database (Denmark)

    Acretoaie, Vlad

    End-user modelers are domain experts who create and use models as part of their work. They are typically not Software Engineers, and have little or no programming and meta-modeling experience. However, using model manipulation languages developed in the context of Model-Driven Engineering often...... of these proposals. To achieve its first goal, the thesis presents the findings of a Systematic Mapping Study showing that human factors topics are scarcely and relatively poorly addressed in model transformation research. Motivated by these findings, the thesis explores the requirements of end-user modelers......, and transformations using their modeling notation and editor of choice. The VM* languages are implemented via a single execution engine, the VM* Runtime, built on top of the Henshin graph-based transformation engine. This approach combines the benefits of flexibility, maturity, and formality. To simplify model editor...

  3. Pollution Prevention Successes Database (P2SDb) user guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    When Pollution Prevention Opportunity Assessments (P2OAs) were launched at the Hanford Site during the summer of 1994, the first comment received from those using them expressed the desire for a method to report assessments electronically. As a temporary measure, macros were developed for use on word processing systems, but a more formal database was obviously needed. Additionally, increased DOE and Washington state reporting requirements for pollution prevention suggested that a database system would streamline the reporting process. The Pollution Prevention Group of Westinghouse Hanford Company (WHC) contracted with the Data Automation Engineering Department from ICF Kaiser Hanford Company (ICFKH) to develop the system. The scope was to develop a database that will track P2OAs conducted by the facilities and contractors at the Hanford Site. It will also track pollution prevention accomplishments that are not the result of P2OAs and document a portion of the Process Waste Assessments conducted in the past. To accommodate the above criteria, yet complete the system in a timely manner, the Pollution Prevention Successes Database (P2SDb) is being implemented in three phases. The first phase will automate the worksheets to provide both input and output of the data associated with the worksheets. The second phase will automate standard summary reports and ad hoc reports. The third phase will provide automated searching of the database to facilitate the sharing of pollution prevention experiences among various users. This User`s Guide addresses only the Phase 1 system.

  4. Nuclear computerized library for assessing reactor reliability (NUCLARR): Part 2, Guide to operations: User's guide

    International Nuclear Information System (INIS)

    Gilmore, W.E.; Gentillon, C.D.; Gertman, D.I.; Beers, G.H.; Galyean, W.J.; Gilbert, B.G.

    1988-06-01

    The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. NUCLARR can be used by the end user to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume IV of this series is the User's Guide for operating the NUCLARR software and is presented in three parts. This volume, Part 2: Guide to Operations, contains the instructions and basic procedures for using the NUCLARR software. Part 2 provides guidance and information for getting started, performing the desired functions, and making the most efficient use of the system's features

  5. Electronic Field Guides and User Communities in the Eco-informatics Revolution

    Directory of Open Access Journals (Sweden)

    R. D. Stevenson

    2003-07-01

    Full Text Available The recognition that taxonomy is central to the conservation of biodiversity has reestablished the critical role of taxonomy in biology. However, many of the tools taxonomists produce for the identification and characterization of species, e.g., dichotomous keys, have been difficult to use and largely ignored by the general public in favor of field guides, which are essentially browsable picture guides. We review the role of field guides in species identification and discuss the application of a host of digital technologies to produce user-friendly tools for identification that are likely to greatly enhance species identification in the field by nonspecialists. We suggest that wider adoption of the citizen science model and the use of electronic field guides will enhance public understanding and participation in biodiversity monitoring.

  6. OP-Yield Version 1.00 user's guide

    Science.gov (United States)

    Martin W. Ritchie; Jianwei Zhang

    2018-01-01

    OP-Yield is a Microsoft Excel™ spreadsheet with 14 specified user inputs to derive custom yield estimates using the original Oliver and Powers (1978) functions as the foundation. It presents yields for ponderosa pine (Pinus ponderosa Lawson & C. Lawson) plantations in northern California. The basic model forms for dominantand...

  7. A user`s guide to LHS: Sandia`s Latin Hypercube Sampling Software

    Energy Technology Data Exchange (ETDEWEB)

    Wyss, G.D.; Jorgensen, K.H. [Sandia National Labs., Albuquerque, NM (United States). Risk Assessment and Systems Modeling Dept.

    1998-02-01

    This document is a reference guide for LHS, Sandia`s Latin Hypercube Sampling Software. This software has been developed to generate either Latin hypercube or random multivariate samples. The Latin hypercube technique employs a constrained sampling scheme, whereas random sampling corresponds to a simple Monte Carlo technique. The present program replaces the previous Latin hypercube sampling program developed at Sandia National Laboratories (SAND83-2365). This manual covers the theory behind stratified sampling as well as use of the LHS code both with the Windows graphical user interface and in the stand-alone mode.

  8. Sierra/SolidMechanics 4.48 User's Guide: Addendum for Shock Capabilities.

    Energy Technology Data Exchange (ETDEWEB)

    Plews, Julia A.; Crane, Nathan K; de Frias, Gabriel Jose; Le, San; Littlewood, David John; Merewether, Mark Thomas; Mosby, Matthew David; Pierson, Kendall H.; Porter, Vicki L.; Shelton, Timothy; Thomas, Jesse David; Tupek, Michael R.; Veilleux, Michael; Xavier, Patrick G.

    2018-03-01

    This is an addendum to the Sierra/SolidMechanics 4.48 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export-control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export-control requirements. The ITAR enhancements to Sierra/SM in- clude material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. Since this is an addendum to the standard Sierra/SM user's guide, please refer to that document first for general descriptions of code capability and use.

  9. Miro V3.0: user guide and reference manual; Miro V3.0: guide utilisateur et manuel de reference

    Energy Technology Data Exchange (ETDEWEB)

    Donnat, Ph.; Treimany, C.; Morice, O.; Ribeyre, X

    1998-06-01

    This paper contains the user`s guide and reference manual of Miro software. This software is used for simulating propagation and amplification of laser beams in laser devices as Megajoules or NIF. The physical effects taken into account ar essentially: saturated amplification, absorption, Kerr effect, birefringence and aberrations. The models of propagation are either geometrical optics of parallel beams, or Fresnel diffraction. A graphic user interface as been included to allow interactive management of optical devices and results. A Unix environment with X-Window and Motif is required to run Miro. The user`s guide gives a short insight of the software. The reference manual details the physical models and the way they are implanted in Miro. (author) 33 refs.

  10. User guide to the SRS data logging facility

    International Nuclear Information System (INIS)

    Tyson, B.E.

    1979-02-01

    The state of the SRS is recorded every two minutes, thus providing a detailed History of its parameters. Recording of History is done via the SRS Computer Network. This consists of a Master Computer, an Interdata 7/32, and three Minicomputers, Interdata 7/16s. Each of the Minicomputers controls one of the accelerators, Linac, Booster and Storage Ring. The Master Computer is connected to the Central Computer, an IBM 370/165, for jobs where greater computing power and storage are required. The Master Computer has a total of 20 Megabytes of fixed and movable disc space but only about 5 Megabytes are available for History storage. The Minicomputers have no storage facilities. The user guide is set out as follows: History filing system, History storage on the Master Computer, transfer of the History to the Central Computer, transferring History to tapes, job integrity, the SRS tape catalogue system. (author)

  11. Waste treatability guidance program. User's guide. Revision 0

    International Nuclear Information System (INIS)

    Toth, C.

    1995-01-01

    DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatability groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User's Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan

  12. Refinery energy profile: User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Maier, R.W.; Olivent, W.P.; Brandt, D.L.; Golden, T.G.

    1979-01-01

    Energy profiles are essentially detailed energy balances of refineries showing all inputs and losses for the total refinery and for each of the individual processing units. By showing the losses from each individual heater, exchanger, etc., the items with the greatest potential for saving energy are pinpointed for further evaluation. This User's Guide contains the step-by-step procedure that has been developed for preparing energy profiles at any refinery. The guide is written for people familiar with refinery equipment and operations and should provide sufficient guidance so that problems in preparing an energy profile at any refinery can be resolved. The technique is presented as four parts covering preparation, data gathering, performing calculations, and preparing the profiles. Section 2 on preparation gives the steps to take in starting the project and the procedures to follow in making preparations for gathering the raw data needed to calculate the various energy balances that are used in developing refinery energy profiles. Section 3 gives the procedures for gathering the raw data at a refinery. Section 4 gives the procedures for calculating the various energy balances. Section 5 gives the procedures for preparing the profiles once the various calculations have been completed.

  13. Pollution Prevention Successes Database (P2SDb) user guide

    International Nuclear Information System (INIS)

    1995-07-01

    When Pollution Prevention Opportunity Assessments (P2OAs) were launched at the Hanford Site during the summer of 1994, the first comment received from those using them expressed the desire for a method to report assessments electronically. As a temporary measure, macros were developed for use on word processing systems, but a more formal database was obviously needed. Additionally, increased DOE and Washington state reporting requirements for pollution prevention suggested that a database system would streamline the reporting process. The Pollution Prevention Group of Westinghouse Hanford Company (WHC) contracted with the Data Automation Engineering Department from ICF Kaiser Hanford Company (ICFKH) to develop the system. The scope was to develop a database that will track P2OAs conducted by the facilities and contractors at the Hanford Site. It will also track pollution prevention accomplishments that are not the result of P2OAs and document a portion of the Process Waste Assessments conducted in the past. To accommodate the above criteria, yet complete the system in a timely manner, the Pollution Prevention Successes Database (P2SDb) is being implemented in three phases. The first phase will automate the worksheets to provide both input and output of the data associated with the worksheets. The second phase will automate standard summary reports and ad hoc reports. The third phase will provide automated searching of the database to facilitate the sharing of pollution prevention experiences among various users. This User's Guide addresses only the Phase 1 system

  14. Distributed Bayesian Networks for User Modeling

    DEFF Research Database (Denmark)

    Tedesco, Roberto; Dolog, Peter; Nejdl, Wolfgang

    2006-01-01

    The World Wide Web is a popular platform for providing eLearning applications to a wide spectrum of users. However – as users differ in their preferences, background, requirements, and goals – applications should provide personalization mechanisms. In the Web context, user models used...... by such adaptive applications are often partial fragments of an overall user model. The fragments have then to be collected and merged into a global user profile. In this paper we investigate and present algorithms able to cope with distributed, fragmented user models – based on Bayesian Networks – in the context...... of Web-based eLearning platforms. The scenario we are tackling assumes learners who use several systems over time, which are able to create partial Bayesian Networks for user models based on the local system context. In particular, we focus on how to merge these partial user models. Our merge mechanism...

  15. Advanced space system analysis software. Technical, user, and programmer guide

    Science.gov (United States)

    Farrell, C. E.; Zimbelman, H. F.

    1981-01-01

    The LASS computer program provides a tool for interactive preliminary and conceptual design of LSS. Eight program modules were developed, including four automated model geometry generators, an associated mass properties module, an appendage synthesizer module, an rf analysis module, and an orbital transfer analysis module. The existing rigid body controls analysis module was modified to permit analysis of effects of solar pressure on orbital performance. A description of each module, user instructions, and programmer information are included.

  16. Modular Engine Noise Component Prediction System (MCP) Program Users' Guide

    Science.gov (United States)

    Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.

    2004-01-01

    This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).

  17. User`s guide for the irradiation of experiments in the FTR. Revision 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-07-01

    This document provides Revision 3 updates the FTR Users Guide. Revision 3 updates Appendix 1 (FFTF Technical Specifications) to include the following: Documentation of the acceptability of handling metal fuel assemblies in the Closed Loop Ex-Vessel Handling Machine (CLEM) and storing them in the Interim Decay Storage (IDS) vessel. Reactivity limit version (utilizing existing FSAR analysis bounds) to allow for the larger beta-effective associated with the addition of enriched uranium metal and oxide experiments to the core. Operational temperature limits for Open Test Assemblies (OTAs) have been expanded to differentiate between 40-foot experiment test articles, 28-foot Post Irradiation Open Test Assemblies (PIOTAs) and the 28-foot Loose Parts Monitor Assemblies (LMPAs) operating under FFTF core Engineering cognizance.

  18. User's Guide for RESRAD-OFFSITE

    Energy Technology Data Exchange (ETDEWEB)

    Gnanapragasam, E. [Argonne National Lab. (ANL), Argonne, IL (United States); Yu, C. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-04-01

    The RESRAD-OFFSITE code can be used to model the radiological dose or risk to an offsite receptor. This User’s Guide for RESRAD-OFFSITE Version 3.1 is an update of the User’s Guide for RESRAD-OFFSITE Version 2 contained in the Appendix A of the User’s Manual for RESRAD-OFFSITE Version 2 (ANL/EVS/TM/07-1, DOE/HS-0005, NUREG/CR-6937). This user’s guide presents the basic information necessary to use Version 3.1 of the code. It also points to the help file and other documents that provide more detailed information about the inputs, the input forms and features/tools in the code; two of the features (overriding the source term and computing area factors) are discussed in the appendices to this guide. Section 2 describes how to download and install the code and then verify the installation of the code. Section 3 shows ways to navigate through the input screens to simulate various exposure scenarios and to view the results in graphics and text reports. Section 4 has screen shots of each input form in the code and provides basic information about each parameter to increase the user’s understanding of the code. Section 5 outlines the contents of all the text reports and the graphical output. It also describes the commands in the two output viewers. Section 6 deals with the probabilistic and sensitivity analysis tools available in the code. Section 7 details the various ways of obtaining help in the code.

  19. Assessment of Dog Guides by Users in Japan and Suggestions for Improvement

    Science.gov (United States)

    Koda, Naoko; Kubo, Masumi; Ishigami, Tomomi; Furuhashi, Hiroaki

    2011-01-01

    Dog guide users in Japan were mostly satisfied with and used their dogs frequently; however, they requested some improvements in training and in basic guiding work. The findings of the study suggest the need for further improvement of training methods, considering cultural factors and individual users' needs. (Contains 3 tables.)

  20. SALOME. Software for the analysis of lines or multiplets from Extrap. User's guide

    International Nuclear Information System (INIS)

    Zastrow, K.D.

    1994-01-01

    This user's guide describes the centre piece of spectral analysis programs for Extrap-T1. The method for spectral analysis is presented theoretically. It also presents the actual use of the program PROBESCHUSS and how to work on the multiplet library. The present user's guide is about PROBESCHUSS 2.1 and MULTIFIT 2.0. 7 figs, 5 appendices

  1. The cervical vertebral maturation method: A user's guide.

    Science.gov (United States)

    McNamara, James A; Franchi, Lorenzo

    2018-03-01

    The cervical vertebral maturation (CVM) method is used to determine the craniofacial skeletal maturational stage of an individual at a specific time point during the growth process. This diagnostic approach uses data derived from the second (C2), third (C3), and fourth (C4) cervical vertebrae, as visualized in a two-dimensional lateral cephalogram. Six maturational stages of those three cervical vertebrae can be determined, based on the morphology of their bodies. The first step is to evaluate the inferior border of these vertebral bodies, determining whether they are flat or concave (ie, presence of a visible notch). The second step in the analysis is to evaluate the shape of C3 and C4. These vertebral bodies change in shape in a typical sequence, progressing from trapezoidal to rectangular horizontal, to square, and to rectangular vertical. Typically, cervical stages (CSs) 1 and CS 2 are considered prepubertal, CS 3 and CS 4 circumpubertal, and CS 5 and CS 6 postpubertal. Criticism has been rendered as to the reproducibility of the CVM method. Diminished reliability may be observed at least in part due to the lack of a definitive description of the staging procedure in the literature. Based on the now nearly 20 years of experience in staging cervical vertebrae, this article was prepared as a "user's guide" that describes the CVM stages in detail in attempt to help the reader use this approach in everyday clinical practice.

  2. Documentation and user guides for SPBLOB: a computer simulation model of the join population dynamics for loblolly pine and the southern pine beetle

    Science.gov (United States)

    John Bishir; James Roberds; Brian Strom; Xiaohai Wan

    2009-01-01

    SPLOB is a computer simulation model for the interaction between loblolly pine (Pinus taeda L.), the economically most important forest crop in the United States, and the southern pine beetle (SPB: Dendroctonus frontalis Zimm.), the major insect pest for this species. The model simulates loblolly pine stands from time of planting...

  3. User's guide to the Reliability Estimation System Testbed (REST)

    Science.gov (United States)

    Nicol, David M.; Palumbo, Daniel L.; Rifkin, Adam

    1992-01-01

    The Reliability Estimation System Testbed is an X-window based reliability modeling tool that was created to explore the use of the Reliability Modeling Language (RML). RML was defined to support several reliability analysis techniques including modularization, graphical representation, Failure Mode Effects Simulation (FMES), and parallel processing. These techniques are most useful in modeling large systems. Using modularization, an analyst can create reliability models for individual system components. The modules can be tested separately and then combined to compute the total system reliability. Because a one-to-one relationship can be established between system components and the reliability modules, a graphical user interface may be used to describe the system model. RML was designed to permit message passing between modules. This feature enables reliability modeling based on a run time simulation of the system wide effects of a component's failure modes. The use of failure modes effects simulation enhances the analyst's ability to correctly express system behavior when using the modularization approach to reliability modeling. To alleviate the computation bottleneck often found in large reliability models, REST was designed to take advantage of parallel processing on hypercube processors.

  4. iTOUGH2-IFC: An Integrated Flow Code in Support of Nagra's Probabilistic Safety Assessment: User's Guide and Model Description

    International Nuclear Information System (INIS)

    Finsterle, Stefan A.

    2009-01-01

    This document describes the development and use of the Integrated Flow Code (IFC), a numerical code and related model to be used for the simulation of time-dependent, two-phase flow in the near field and geosphere of a gas-generating nuclear waste repository system located in an initially fully water-saturated claystone (Opalinus Clay) in Switzerland. The development of the code and model was supported by the Swiss National Cooperative for the Disposal of Radioactive Waste (Nagra), Wettingen, Switzerland. Gas generation (mainly H 2 , but also CH 4 and CO 2 ) may affect repository performance by (1) compromising the engineered barriers through excessive pressure build-up, (2) displacing potentially contaminated pore water, (3) releasing radioactive gases (e.g., those containing 14 C and 3 H), (4) changing hydrogeologic properties of the engineered barrier system and the host rock, and (5) altering the groundwater flow field and thus radionuclide migration paths. The IFC aims at providing water and gas flow fields as the basis for the subsequent radionuclide transport simulations, which are performed by the radionuclide transport code (RTC). The IFC, RTC and a waste-dissolution and near-field transport model (STMAN) are part of the Integrated Radionuclide Release Code (IRRC), which integrates all safety-relevant features, events, and processes (FEPs). The IRRC is embedded into a Probabilistic Safety Assessment (PSA) computational tool that (1) evaluates alternative conceptual models, scenarios, and disruptive events, and (2) performs Monte-Carlo sampling to account for parametric uncertainties. The preliminary probabilistic safety assessment concept and the role of the IFC are visualized in Figure 1. The IFC was developed based on Nagra's PSA concept. Specifically, as many phenomena as possible are to be directly simulated using a (simplified) process model, which is at the core of the IRRC model. Uncertainty evaluation (scenario uncertainty, conceptualization

  5. KAYENTA: Theory and User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Brannon, Rebecca Moss [Univ. of Utah, Salt Lake City, UT (United States); Fuller, Timothy Jesse [Orbital ATK Inc., Magna, UT (United States); Strack, Otto Eric [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Fossum, Arlo Frederick [BP America, Inc., Houston, TX (United States); Sanchez, Jason James [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    The physical foundations and domain of applicability of the Kayenta constitutive model are presented along with descriptions of the source code and user instructions. Kayenta, which is an outgrowth of the Sandia GeoModel, includes features and fitting functions appropriate to a broad class of materials including rocks, rock-like engineered materials (such as concretes and ceramics), and metals. Fundamentally, Kayenta is a computational framework for generalized plasticity models. As such, it includes a yield surface, but the term (3z(Byield(3y (Bis generalized to include any form of inelastic material response (including microcrack growth and pore collapse) that can result in non-recovered strain upon removal of loads on a material element. Kayenta supports optional anisotropic elasticity associated with joint sets, as well as optional deformation-induced anisotropy through kinematic hardening (in which the initially isotropic yield surface is permitted to translate in deviatoric stress space to model Bauschinger effects). The governing equations are otherwise isotropic. Because Kayenta is a unification and generalization of simpler models, it can be run using as few as 2 parameters (for linear elasticity) to as many as 40 material and control parameters in the exceptionally rare case when all features are used. For high-strain-rate applications, Kayenta supports rate dependence through an overstress model. Isotropic damage is modeled through loss of stiffness and strength.

  6. KAYENTA : theory and user's guide.

    Energy Technology Data Exchange (ETDEWEB)

    Brannon, Rebecca Moss (University of Utah, Salt Lake City, UT); Fossum, Arlo Frederick (BP America, Inc., Houston, TX); Strack, Otto Eric

    2009-03-01

    The physical foundations and domain of applicability of the Kayenta constitutive model are presented along with descriptions of the source code and user instructions. Kayenta, which is an outgrowth of the Sandia GeoModel, includes features and fitting functions appropriate to a broad class of materials including rocks, rock-like engineered materials (such as concretes and ceramics), and metals. Fundamentally, Kayenta is a computational framework for generalized plasticity models. As such, it includes a yield surface, but the term 'yield' is generalized to include any form of inelastic material response including microcrack growth and pore collapse. Kayenta supports optional anisotropic elasticity associated with ubiquitous joint sets. Kayenta supports optional deformation-induced anisotropy through kinematic hardening (in which the initially isotropic yield surface is permitted to translate in deviatoric stress space to model Bauschinger effects). The governing equations are otherwise isotropic. Because Kayenta is a unification and generalization of simpler models, it can be run using as few as 2 parameters (for linear elasticity) to as many as 40 material and control parameters in the exceptionally rare case when all features are used. For high-strain-rate applications, Kayenta supports rate dependence through an overstress model. Isotropic damage is modeled through loss of stiffness and strength.

  7. Users' guide for the Accelerated Leach Test Computer Program

    International Nuclear Information System (INIS)

    Fuhrmann, M.; Heiser, J.H.; Pietrzak, R.; Franz, Eena-Mai; Colombo, P.

    1990-11-01

    This report is a step-by-step guide for the Accelerated Leach Test (ALT) Computer Program developed to accompany a new leach test for solidified waste forms. The program is designed to be used as a tool for performing the calculations necessary to analyze leach test data, a modeling program to determine if diffusion is the operating leaching mechanism (and, if not, to indicate other possible mechanisms), and a means to make extrapolations using the diffusion models. The ALT program contains four mathematical models that can be used to represent the data. The leaching mechanisms described by these models are: (1) diffusion through a semi-infinite medium (for low fractional releases), (2) diffusion through a finite cylinder (for high fractional releases), (3) diffusion plus partitioning of the source term, (4) solubility limited leaching. Results are presented as a graph containing the experimental data and the best-fit model curve. Results can also be output as LOTUS 1-2-3 files. 2 refs

  8. MELCOR computer code manuals: Primer and user`s guides, Version 1.8.3 September 1994. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A.; Hyman, C.R.; Sanders, R.L. [Oak Ridge National Lab., TN (United States)

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the US Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users` Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.

  9. Steam explosion simulation code JASMINE v.3 user's guide

    International Nuclear Information System (INIS)

    Moriyama, Kiyofumi; Maruyama, Yu; Nakamura, Hideo

    2008-07-01

    A steam explosion occurs when hot liquid contacts with cold volatile liquid. In this phenomenon, fine fragmentation of the hot liquid causes extremely rapid heat transfer from the hot liquid to the cold volatile liquid, and explosive vaporization, bringing shock waves and destructive forces. The steam explosion due to the contact of the molten core material and coolant water during severe accidents of light water reactors has been regarded as a potential threat to the integrity of the containment vessel. We developed a mechanistic steam explosion simulation code, JASMINE, that is applicable to plant scale assessment of the steam explosion loads. This document, as a manual for users of JASMINE code, describes the models, numerical solution methods, and also some verification and example calculations, as well as practical instructions for input preparation and usage of the code. (author)

  10. User's guide for the PWR LOCA analysis capability of the WRAP-EM system

    Energy Technology Data Exchange (ETDEWEB)

    Beranek, F; Gregory, M V

    1980-02-01

    The Water Reactor Analysis Package (WRAP) has been expanded to provide the capability to analyze loss-of-coolant accidents (LOCAs) in both pressurized water reactors (PWRs) and boiling water reactors (BWRs) by using evaluation models (EMs). The input specifications for modules in the WRAP-EM system are presented in this document along with the JOSHUA input templates. This document, along with the WRAP user's guide, provides a step-by-step procedure for setting up a PWR data base for the WRAP-EM system. 12 refs.

  11. Nuclear Engine System Simulation (NESS). Version 2.0: Program user's guide

    Science.gov (United States)

    Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman

    1993-01-01

    This Program User's Guide discusses the Nuclear Thermal Propulsion (NTP) engine system design features and capabilities modeled in the Nuclear Engine System Simulation (NESS): Version 2.0 program (referred to as NESS throughout the remainder of this document), as well as its operation. NESS was upgraded to include many new modeling capabilities not available in the original version delivered to NASA LeRC in Dec. 1991, NESS's new features include the following: (1) an improved input format; (2) an advanced solid-core NERVA-type reactor system model (ENABLER 2); (3) a bleed-cycle engine system option; (4) an axial-turbopump design option; (5) an automated pump-out turbopump assembly sizing option; (6) an off-design gas generator engine cycle design option; (7) updated hydrogen properties; (8) an improved output format; and (9) personal computer operation capability. Sample design cases are presented in the user's guide that demonstrate many of the new features associated with this upgraded version of NESS, as well as design modeling features associated with the original version of NESS.

  12. Nuclear Engine System Simulation (NESS). Version 2.0: Program user's guide. Final Report

    International Nuclear Information System (INIS)

    Pelaccio, D.G.; Scheil, C.M.; Petrosky, L.

    1993-03-01

    This Program User's Guide discusses the Nuclear Thermal Propulsion (NTP) engine system design features and capabilities modeled in the Nuclear Engine System Simulation (NESS): Version 2.0 program (referred to as NESS throughout the remainder of this document), as well as its operation. NESS was upgraded to include many new modeling capabilities not available in the original version delivered to NASA LeRC in Dec. 1991, NESS's new features include the following: (1) an improved input format; (2) an advanced solid-core NERVA-type reactor system model (ENABLER 2); (3) a bleed-cycle engine system option; (4) an axial-turbopump design option; (5) an automated pump-out turbopump assembly sizing option; (6) an off-design gas generator engine cycle design option; (7) updated hydrogen properties; (8) an improved output formnd (9) personal computer operation capability. Sample design cases are presented in the user's guide that demonstrate many of the new features associated with this upgraded version of NESS, as well as design modeling features associated with the original version of NESS

  13. Hanford ground-water data base management guide and user's manual

    International Nuclear Information System (INIS)

    Mitchell, P.J.; Argo, R.S.; Bradymire, S.L.; Newbill, C.A.

    1985-05-01

    This management guide and user's manual is a working document for the computerized Hanford Ground-water Data Base maintained by the Geosciences Research and Engineering Department at Pacific Northwest Laboratory for the Hanford Ground-Water Surveillance Program. The program is managed by the Occupational and Environmental Protection Department for the US Department of Energy. The data base is maintained to provide rapid access to data that are rountinely collected from ground-water monitoring wells at the Hanford site. The data include water levels, sample analyses, geologic descriptions and well construction information of over 3000 existing or destroyed wells. These data are used to monitor water quality and for the evaluation of ground-water flow and pollutant transport problems. The management guide gives instructions for maintenance of the data base on the Digital Equipment Corporation PDP 11/70 Computer using the CIRMIS (Comprehensive Information Retrieval and Model Input Sequence) data base management software developed at Pacific Northwest Laboratory. Maintenance activities include inserting, modifying and deleting data, making back-up copies of the data base, and generating tables for annual monitoring reports. The user's guide includes instructions for running programs to retrieve the data in the form of listings of graphical plots. 3 refs

  14. Six-Degree-of-Freedom Dynamic Test System (SDTS) User Test Planning Guide

    Science.gov (United States)

    Stokes, LeBarian

    2012-01-01

    Test process, milestones and inputs are unknowns to first-time users of the SDTS. The User Test Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  15. A user's guide to the atmospheric dispersion module NECTAR-ATMOS

    International Nuclear Information System (INIS)

    Barker, C.D.

    1982-02-01

    The NECTAR environmental computer code has been developed to meet the increasing demand for comprehensive calculations of the radiological consequences due to atmospheric releases of radioactivity. The code contains five calculational modules and this report presents a user's guide to the atmospheric dispersion and individual dose evaluation module NECTAR-ATMOS. The mathematical models employed in NECTAR-ATMOS are briefly described and a complete specification of the input data required for the module is given. The program includes facilities for reading in the source terms, for specifying the atmospheric dispersion parameters, for identifying the dose calculations required and for controlling output from the program to lineprinters and to output utility files. Three sample cases are included in an appendix to demonstrate some of the different ways in which the program may be used and also to provide examples for the prospective user. (author)

  16. TIM Version 3.0 beta Technical Description and User Guide - Appendix B - Example input file for TIMv3.0

    Science.gov (United States)

    Terrestrial Investigation Model, TIM, has several appendices to its user guide. This is the appendix that includes an example input file in its preserved format. Both parameters and comments defining them are included.

  17. User`s guide and documentation manual for ``PC-Gel`` simulator

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Ming-Ming; Gao, Hong W.

    1993-10-01

    PC-GEL is a three-dimensional, three-phase (oil, water, and gas) permeability modification simulator developed by incorporating an in-situ gelation model into a black oil simulator (BOAST) for personal computer application. The features included in the simulator are: transport of each chemical species of the polymer/crosslinker system in porous media, gelation reaction kinetics of the polymer with crosslinking agents, rheology of the polymer and gel, inaccessible pore volume to macromolecules, adsorption of chemical species on rock surfaces, retention of gel on the rock matrix, and permeability reduction caused by the adsorption of polymer and gel. The in-situ gelation model and simulator were validated against data reported in the literature. The simulator PC-GEL is useful for simulating and optimizing any combination of primary production, waterflooding, polymer flooding, and permeability modification treatments. A general background of permeability modification using crosslinked polymer gels is given in Section I and the governing equations, mechanisms, and numerical solutions of PC-GEL are given in Section II. Steps for preparing an input data file with reservoir and gel-chemical transport data, and recurrent data are described in Sections III and IV, respectively. Example data inputs are enclosed after explanations of each input line to help the user prepare data files. Major items of the output files are reviewed in Section V. Finally, three sample problems for running PC-GEL are described in Section VI, and input files and part of the output files of these problems are listed in the appendices. For the user`s reference a copy of the source code of PC-GEL computer program is attached in Appendix A.

  18. Sierra/SolidMechanics 4.22 user's guide : addendum for shock capabilities.

    Energy Technology Data Exchange (ETDEWEB)

    2011-10-01

    This is an addendum to the Sierra/SolidMechanics 4.22 User's Guide to document additional capabilities that are available for use in the Presto{_}ITAR code that are not available for use in the standard version of Sierra/SolidMechanics (Sierra/SM). Presto{_}ITAR is an enhanced version of Sierra/SM that provides capabilities that make it regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export-control rules. This code is part of the Vivace product, and is only distributed to entities that comply with ITAR regulations. The enhancements primarily focus on material models that include an energy-dependent pressure response, appropriate for very large deformations and strain rates. Since this is an addendum to the standard Sierra/SolidMechanics User's Guide, please refer to that document first for general descriptions of code capability and use. This addendum documents material models and element features that support energy-dependent material models.

  19. Presto 4.20 user's guide : addendum for shock capabilities.

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, Benjamin Whiting

    2011-06-01

    This is an addendum to the Presto 4.20 User's Guide to document additional capabilities that are available for use in the Presto{_}ITAR code that are not available for use in the standard version of Presto. Presto{_}ITAR is an enhanced version of Presto that provides capabilities that make it regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export-control rules. This code is part of the Vivace product, and is only distributed to entities that comply with ITAR regulations. The enhancements primarily focus on material models that include an energy-dependent pressure response, appropriate for very large deformations and strain rates. Since this is an addendum to the standard Presto User's Guide, please refer to that document first for general descriptions of code capability and use. This addendum documents material models and element features that support energy-dependent material models.

  20. User's guide for remote access of the Performance Assessment Center

    International Nuclear Information System (INIS)

    Peterson, C.R.; Kostelnik, K.M.

    1991-03-01

    The Performance Assessment Center (PAC) was established by the Department of Energy's National Low-Level Waste Management Program to provide technical assistance to support the development of low-level radioactive waste disposal facilities. This user's manual provides guidance to remote users of the PAC. Information is presented on how remote users may most effectively access and use the systems available at the Performance Assessment Center in Idaho Falls, Idaho. Access requirements and operating procedures are presented to assist the first-time PAC user. This manual also provides brief descriptions of each code available on the system

  1. HTGR Application Economic Model Users' Manual

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooled Reactor (HTGR) Application Economic Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Application Economic Model calculates either the required selling price of power and/or heat for a given internal rate of return (IRR) or the IRR for power and/or heat being sold at the market price. The user can generate these economic results for a range of reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for up to 16 reactor modules; and for module ratings of 200, 350, or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Application Economic Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Application Economic Model. This model was designed for users who are familiar with the HTGR design and Excel and engineering economics. Modification of the HTGR Application Economic Model should only be performed by users familiar with the HTGR and its applications, Excel, and Visual Basic.

  2. Do recommender systems benefit users? a modeling approach

    Science.gov (United States)

    Yeung, Chi Ho

    2016-04-01

    Recommender systems are present in many web applications to guide purchase choices. They increase sales and benefit sellers, but whether they benefit customers by providing relevant products remains less explored. While in many cases the recommended products are relevant to users, in other cases customers may be tempted to purchase the products only because they are recommended. Here we introduce a model to examine the benefit of recommender systems for users, and find that recommendations from the system can be equivalent to random draws if one always follows the recommendations and seldom purchases according to his or her own preference. Nevertheless, with sufficient information about user preferences, recommendations become accurate and an abrupt transition to this accurate regime is observed for some of the studied algorithms. On the other hand, we find that high estimated accuracy indicated by common accuracy metrics is not necessarily equivalent to high real accuracy in matching users with products. This disagreement between estimated and real accuracy serves as an alarm for operators and researchers who evaluate recommender systems merely with accuracy metrics. We tested our model with a real dataset and observed similar behaviors. Finally, a recommendation approach with improved accuracy is suggested. These results imply that recommender systems can benefit users, but the more frequently a user purchases the recommended products, the less relevant the recommended products are in matching user taste.

  3. A User’s Guide to IDEA in the CCBS System,

    Science.gov (United States)

    to colloborate with a library of programmed heuristics in the process of uncovering and representing the structure in his data. This user’s guide is designed to assist in behavioral studies. (Author)

  4. NASIS data base management system: IBM 360 TSS implementation. Volume 8: Data base administrator user's guide

    Science.gov (United States)

    1973-01-01

    The Data Base Administrator User's Guide for the NASA Aerospace Safety Information System is presented. The subjects discussed are: (1) multi-terminal tasking, (2) data base executive, (3) utilities, (4) maintenance, (5) terminal support, and (6) retrieval subsystem.

  5. DEVELOPMENT OF A NATURAL GAS SYSTEMS ANALYSIS MODEL (GSAM) VOLUME I - SUMMARY REPORT VOLUME II - USER'S GUIDE VOLUME IIIA - RP PROGRAMMER'S GUIDE VOLUME IIIB - SRPM PROGRAMMER'S GUIDE VOLUME IIIC - E and P PROGRAMMER'S GUIDE VOLUME IIID - D and I PROGRAMMER'S GUIDE

    International Nuclear Information System (INIS)

    2001-01-01

    This report summarizes work completed on DOE Contract DE-AC21-92MC28138, Development of a Natural Gas Systems Analysis Model (GSAM). The products developed under this project directly support the National Energy Technology Laboratory (NETL) in carrying out its natural gas R and D mission. The objective of this research effort has been to create a comprehensive, non-proprietary, microcomputer model of the North American natural gas market. GSAM has been developed to explicitly evaluate components of the natural gas system, including the entire in-place gas resource base, exploration and development technologies, extraction technology and performance parameters, transportation and storage factors, and end-use demand issues. The system has been fully tested and calibrated and has been used for multiple natural gas metrics analyses at NETL in which metric associated with NETL natural gas upstream R and D technologies and strategies under the direction of NETL has been evaluated. NETL's Natural Gas Strategic Plan requires that R and D activities be evaluated for their ability to provide adequate supplies of reasonably priced natural gas. GSAM provides the capability to assess potential and on-going R and D projects using a full fuel cycle, cost-benefit approach. This method yields realistic, market-based assessments of benefits and costs of alternative or related technology advances. GSAM is capable of estimating both technical and commercial successes, quantifying the potential benefits to the market, as well as to other related research. GSAM, therefore, represents an integration of research activities and a method for planning and prioritizing efforts to maximize benefits and minimize costs. Without an analytical tool like GSAM, NETL natural gas upstream R and D activities cannot be appropriately ranked or focused on the most important aspects of natural gas extraction efforts or utilization considerations

  6. DEVELOPMENT OF A NATURAL GAS SYSTEMS ANALYSIS MODEL (GSAM) VOLUME I - SUMMARY REPORT VOLUME II - USER'S GUIDE VOLUME IIIA - RP PROGRAMMER'S GUIDE VOLUME IIIB - SRPM PROGRAMMER'S GUIDE VOLUME IIIC - E&P PROGRAMMER'S GUIDE VOLUME IIID - D&I PROGRAMMER'S GUIDE

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2001-02-01

    This report summarizes work completed on DOE Contract DE-AC21-92MC28138, Development of a Natural Gas Systems Analysis Model (GSAM). The products developed under this project directly support the National Energy Technology Laboratory (NETL) in carrying out its natural gas R&D mission. The objective of this research effort has been to create a comprehensive, non-proprietary, microcomputer model of the North American natural gas market. GSAM has been developed to explicitly evaluate components of the natural gas system, including the entire in-place gas resource base, exploration and development technologies, extraction technology and performance parameters, transportation and storage factors, and end-use demand issues. The system has been fully tested and calibrated and has been used for multiple natural gas metrics analyses at NETL in which metric associated with NETL natural gas upstream R&D technologies and strategies under the direction of NETL has been evaluated. NETL's Natural Gas Strategic Plan requires that R&D activities be evaluated for their ability to provide adequate supplies of reasonably priced natural gas. GSAM provides the capability to assess potential and on-going R&D projects using a full fuel cycle, cost-benefit approach. This method yields realistic, market-based assessments of benefits and costs of alternative or related technology advances. GSAM is capable of estimating both technical and commercial successes, quantifying the potential benefits to the market, as well as to other related research. GSAM, therefore, represents an integration of research activities and a method for planning and prioritizing efforts to maximize benefits and minimize costs. Without an analytical tool like GSAM, NETL natural gas upstream R&D activities cannot be appropriately ranked or focused on the most important aspects of natural gas extraction efforts or utilization considerations.

  7. User's guide for the KBERT 2.0 code

    International Nuclear Information System (INIS)

    Washington, K. E.; Murata, K. K.; Browitt, D. S.; Brockmann, J. E.; Griffith, R. O.; Gelbard, F.; Heames, T. J.

    2000-01-01

    The possibility of worker exposure to radioactive materials during accidents at nuclear facilities is a principal concern of the DOE. The KBERT analysis tool has been developed at Sandia National Laboratories under DOE support to address this issue by assisting in the estimation of risks posed by accidents at chemical and nuclear facilities. KBERT is an acronym for Knowledge-Based system for Estimating hazards of Radioactive material release Transients. KBERT's primary purpose is to predict doses to in-facility workers due to accidental releases of radioactivity. Models are also in KBERT for predicting doses to the public based upon plume dispersal models. This report gives detailed instructions on how a user, starting with knowledge of design, layout and potential hazards of a facility, can use KBERT to assess the risks to workers in that facility and to the public as a result of releases from the facility. A key feature of KBERT is the inclusion of the non-facility-specific material release, radioactive decay, and dose databases (i.e., knowledge bases) that might also be needed for such an assessment. The material release characteristics are based on the 1994 DOE Handbook for airborne release fractions/rates and respirable fractions for nonreactor nuclear facilities. Another important feature of KBERTis the inclusion of a transparent interface between KBERTand the Nuclear Regulatory Commission's CONTAIN code. This interface enables KBERT to use the validated and proven flow models in CONTAIN to predict inter-room airflows. Potential applications of KBERT include the evaluation of the consequences of evacuation practices, the effect of personal protection equipment, and the degree of containment of hazardous materials

  8. Integrated Reliability and Risk Analysis System (IRRAS) Version 2.0 user's guide

    International Nuclear Information System (INIS)

    Russell, K.D.; Sattison, M.B.; Rasmuson, D.M.

    1990-06-01

    The Integrated Reliability and Risk Analysis System (IRRAS) is a state-of-the-art, microcomputer-based probabilistic risk assessment (PRA) model development and analysis tool to address key nuclear plant safety issues. IRRAS is an integrated software tool that gives the user the ability to create and analyze fault trees and accident sequences using a microcomputer. This program provides functions that range from graphical fault tree construction to cut set generation and quantification. Also provided in the system is an integrated full-screen editor for use when interfacing with remote mainframe computer systems. Version 1.0 of the IRRAS program was released in February of 1987. Since that time, many user comments and enhancements have been incorporated into the program providing a much more powerful and user-friendly system. This version has been designated IRRAS 2.0 and is the subject of this user's guide. Version 2.0 of IRRAS provides all of the same capabilities as Version 1.0 and adds a relational data base facility for managing the data, improved functionality, and improved algorithm performance. 9 refs., 292 figs., 4 tabs

  9. A buyer's and user's guide to astronomical telescopes and binoculars

    CERN Document Server

    Mullaney, James

    2014-01-01

    Amateur astronomers of all skill levels are always contemplating their next telescope, and this book points the way to the most suitable instruments. Similarly, those who are buying their first telescopes – and these days not necessarily a low-cost one – will be able to compare and contrast different types and manufacturers. This revised new guide provides an extensive overview of binoculars and telescopes. It includes detailed up-to-date information on sources, selection and use of virtually every major type, brand, and model on today’s market, a truly invaluable treasure-trove of information and helpful advice for all amateur astronomers. Originally written in 2006, much of the first edition is inevitably now out of date, as equipment advances and manufacturers come and go. This second edition not only updates all the existing sections but adds two new ones: Astro-imaging and Professional-Amateur collaboration. Thanks to the rapid and amazing developments that have been made in digital cameras it is...

  10. Total System Performance Assessment Code (TOSPAC); Volume 2, User`s guide: Yucca Mountain Site Characterization Project

    Energy Technology Data Exchange (ETDEWEB)

    Gauthier, J.H.; Dudley, A.L; Skinner, L.H. [Spectra Research Inst., Albuquerque, NM (United States); Wilson, M.L.; Peters, R.R. [Sandia National Labs., Albuquerque, NM (United States)

    1992-07-01

    TOSPAC is a computer program that calculates partially saturated groundwater flow with the transport of water-soluble contaminants. TOSPAC Version 1 is restricted to calculations involving one-dimensional, vertical columns of one or more media. TOSPAC was developed to help answer questions surrounding the burial of toxic wastes in arid regions. Burial of wastes in arid regions is attractive because of generally low population densities and little groundwater flow, in the unsaturated zone, to disturb the waste. TOSPAC helps to quantify groundwater flow and the spread of contamination, offering an idea of what could happen in the distant future. Figure 1.1 illustrates the problem TOSPAC was designed to investigate. For groundwater flow, TOSPAC can provide saturations, velocities, and and travel tunes for water in the rock matrix or the fractures in the unsaturated zone. TOSPAC can determine how hydrologic conditions vary when the rate of infiltration changes. For contaminant transport, TOSPAC can compute how much of a contaminant is dissolved in the water and how it is distributed. TOSPAC can determine how fast the solute is moving and the shape of the concentration front. And TOSPAC can be used to investigate how much of the contaminant remains in the inventory of a repository, how much is adsorbed onto the soil or rock matrix, and how much reaches the water table. Effective use of TOSPAC requires knowledge in a number of diverse disciplines, including real groundwater flow and transport, the mathematical models of groundwater flow and transport, real-world data required for the models, and the numerical solution of differential equations. Equally important is a realization of the limitations intrinsic to a computer model of complex physical phenomena. This User`s Guide not only describes the mechanics of executing TOSPAC on a computer, but also examines these other topics.

  11. User Interactive Guided Search Design Environment, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Phoenix Integration's vision is to create an intuitive human-in-the-loop engineering design environment called Guided Search that leverages recent advances in...

  12. User's guide for Reactor Incident Root Cause Coding Tree

    International Nuclear Information System (INIS)

    Busch, D.A.; Paradies, M.W.

    1986-01-01

    The Reactor Incident (RI) Cause Coding Tree is designed to allow identification of root causes of RI's, thereby leading to trending of useful information and developing of corrective actions to prevent recurrence. This guide explains the terminology of the RI Cause Coding Tree and how to use the tree. Using this guide for cause coding is stressed to allow consistency of coding among all RI investigators. 8 figs

  13. Xyce parallel electronic simulator : users' guide.

    Energy Technology Data Exchange (ETDEWEB)

    Mei, Ting; Rankin, Eric Lamont; Thornquist, Heidi K.; Santarelli, Keith R.; Fixel, Deborah A.; Coffey, Todd Stirling; Russo, Thomas V.; Schiek, Richard Louis; Warrender, Christina E.; Keiter, Eric Richard; Pawlowski, Roger Patrick

    2011-05-01

    This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: (1) Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). Note that this includes support for most popular parallel and serial computers; (2) Improved performance for all numerical kernels (e.g., time integrator, nonlinear and linear solvers) through state-of-the-art algorithms and novel techniques. (3) Device models which are specifically tailored to meet Sandia's needs, including some radiation-aware devices (for Sandia users only); and (4) Object-oriented code design and implementation using modern coding practices that ensure that the Xyce Parallel Electronic Simulator will be maintainable and extensible far into the future. Xyce is a parallel code in the most general sense of the phrase - a message passing parallel implementation - which allows it to run efficiently on the widest possible number of computing platforms. These include serial, shared-memory and distributed-memory parallel as well as heterogeneous platforms. Careful attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows. The development of Xyce provides a platform for computational research and development aimed specifically at the needs of the Laboratory. With Xyce, Sandia has an 'in-house' capability with which both new electrical (e.g., device model development) and algorithmic (e.g., faster time-integration methods, parallel solver algorithms) research and development can be performed. As a result, Xyce is

  14. Entity Resolution Workflow Installation Process and User Guide

    Science.gov (United States)

    2013-07-01

    PostgreSQL Service on Windows OS. ...............................................................3 Figure 2. Starting Global Graph REST Service on...Otherwise, users can use the pre-configured and pre- installed virtual machines to test the ERW components. Installation Sequence 1. Start PostgreSQL ...Service on ERDP-Win7 (figure 1). • Log in to ERDP-Win7 as the “arl” user/administrator. • Use Windows Services Manager to start the PostgreSQL

  15. WorkZoneQ user guide for two-lane freeway work zones.

    Science.gov (United States)

    2013-06-01

    WorkZoneQ was developed in Visual Basic for Applications (VBA) to implement the results of the previous study, : Queue and Users Costs in Highway Work Zones. This report contains the WorkZoneQ user guide. WorkZoneQ : consists of eight Excel ...

  16. Computer-Aided Authoring System (AUTHOR) User's Guide. Volume I. Final Report.

    Science.gov (United States)

    Guitard, Charles R.

    This user's guide for AUTHOR, an automatic authoring system which produces programmed texts for teaching symbol recognition, provides detailed instructions to help the user construct and enter the information needed to create the programmed text, run the AUTHOR program, and edit the automatically composed paper. Major sections describe steps in…

  17. XRLSim model specifications and user interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Young, K.D.; Breitfeller, E.; Woodruff, J.P.

    1989-12-01

    The two chapters in this manual document the engineering development leading to modification of XRLSim -- an Ada-based computer program developed to provide a realistic simulation of an x-ray laser weapon platform. Complete documentation of the FY88 effort to develop XRLSim was published in April 1989, as UCID-21736:XRLSIM Model Specifications and User Interfaces, by L. C. Ng, D. T. Gavel, R. M. Shectman. P. L. Sholl, and J. P. Woodruff. The FY89 effort has been primarily to enhance the x-ray laser weapon-platform model fidelity. Chapter 1 of this manual details enhancements made to XRLSim model specifications during FY89. Chapter 2 provides the user with changes in user interfaces brought about by these enhancements. This chapter is offered as a series of deletions, replacements, and insertions to the original document to enable XRLSim users to implement enhancements developed during FY89.

  18. Presto users guide version 2.6.

    Energy Technology Data Exchange (ETDEWEB)

    Gullerud, Arne S.; Koteras, James Richard; Hales, Jason Dean; Crane, Nathan Karl

    2006-10-01

    Presto is a Lagrangian, three-dimensional explicit, transient dynamics code for the analysis of solids subjected to large, suddenly applied loads. Presto is designed for problems with large deformations, nonlinear material behavior, and contact. There is a versatile element library incorporating both continuum and structural elements. The code is designed for a parallel computing environment. This document describes the input for the code that gives users access to all of the current functionality in the code. Presto is built in an environment that allows it to be coupled with other engineering analysis codes. The input structure for the code, which uses a concept called scope, reflects the fact that Presto can be used in a coupled environment. This guide describes the scope concept and the input from the outermost to the innermost input scopes. Within a given scope, the descriptions of input commands are grouped based on code functionality. For example, all material input command lines are described in a section of the user's guide for all of the material models in the code.

  19. LISA package user guide. Part II: LISA (Long Term Isolation Safety Assessment) program description and user guide

    International Nuclear Information System (INIS)

    Prado, P.; Saltelli, A.; Homma, T.

    1992-01-01

    This manual is subdivided into three parts. In this second part, this document describes the LISA (Long term Isolation Safety Assessment) Code and its submodels. LISA is a tool for analysis of the safety of an underground disposal of nuclear waste. It has the capability to handle nuclide chain of arbitrary length and to evaluate the migration of nuclide through a geosphere medium composed of an arbitrary number of segments. LISA makes use of Monte Carlo methodology to evaluate the uncertainty in the quantity being assessed (eg dose) arising from the uncertainty in the model input parameters. In the present version LISA is equipped with a very simple source term submodel, a relatively complex geosphere and a simplified biosphere. The code is closely associated with its statistical pre-processor code (PREP), which generates the input Monte Carlo sample from the assigned parameter probability density functions and with its post-processor code (SPOP) which provides useful statistics on the output sample (uncertainty and sensitivity analysis). This report describes the general structure of LISA, its subroutines and submodels, the code input ant output files. It is intended to provide the user with enough information to know and run the code as well as the capacity to incorporate different submodels. 15 refs., 6 figs

  20. Users' guide to the positron camera DDP516 computer system

    International Nuclear Information System (INIS)

    Bracher, B.H.

    1979-08-01

    This publication is a guide to the operation, use and software for a DDP516 computer system provided by the Data Handling Group primarily for the development of a Positron Camera. The various sections of the publication fall roughly into three parts. (1) Sections forming the Operators Guide cover the basic operation of the machine, system utilities and back-up procedures. Copies of these sections are kept in a 'Nyrex' folder with the computer. (2) Sections referring to the software written particularly for Positron Camera Data Collection describe the system in outline and lead to details of file formats and program source files. (3) The remainder of the guide, describes General-Purpose Software. Much of this has been written over some years by various members of the Data Handling Group, and is available for use in other applications besides the positron camera. (UK)

  1. Elevation Difference and Bouguer Anomaly Analysis Tool (EDBAAT) User's Guide

    Science.gov (United States)

    Smittle, Aaron M.; Shoberg, Thomas G.

    2017-06-16

    This report describes a software tool that imports gravity anomaly point data from the Gravity Database of the United States (GDUS) of the National Geospatial-Intelligence Agency and University of Texas at El Paso along with elevation data from The National Map (TNM) of the U.S. Geological Survey that lie within a user-specified geographic area of interest. Further, the tool integrates these two sets of data spatially and analyzes the consistency of the elevation of each gravity station from the GDUS with TNM elevation data; it also evaluates the consistency of gravity anomaly data within the GDUS data repository. The tool bins the GDUS data based on user-defined criteria of elevation misfit between the GDUS and TNM elevation data. It also provides users with a list of points from the GDUS data, which have Bouguer anomaly values that are considered outliers (two standard deviations or greater) with respect to other nearby GDUS anomaly data. “Nearby” can be defined by the user at time of execution. These outputs should allow users to quickly and efficiently choose which points from the GDUS would be most useful in reconnaissance studies or in augmenting and extending the range of individual gravity studies.

  2. PEDRO (Petroleum Electronic Data Reporting Option) user guide

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-01

    PEDRO is an electronic data communications product that simplifies filing and transmission of petroleum survey data. Your burden is significantly reduced as PEDRO eliminates paperwork, provides immediate onsite correction of data errors, and reduces the need for followup calls and survey resubmission. PEDRO provides an online error-checking process that highlights discrepancies. This permits you to enter and check data before transmitting to EIA. EIA then combines and reformats the data from different users for use by analytical and reporting programs. PEDRO is available at no cost to the user. Formal training is not required since installation, data processing, and transmission are done by interactive, user-friendly menu options. The PEDRO system is divided into three functions: (1) data processing, (2) transmitting data to EIA, and (3) EIA processing. 28 figs.

  3. User's guide for the small-angle neutron scattering facility

    International Nuclear Information System (INIS)

    Vlak, W.A.H.M.; Werkhoven, E.J.

    1989-04-01

    This report serves as a manual for the users of the small-angle neutron scattering instrument located at beamport HB3 of the High Flux Reactor in Petten. The main part of the text is devoted to the control of the facility and the data handling by means of a μVAX computer. Also, the various possibilities to access the facility across computer networks are discussed. A collection of menu-driven and command-driven programs, which utilize the flexibility of the VMS operating system without requiring detailed knowledge of the user about the computer environment, enables to control the instrument. For the convenience of the experienced user, who might wish to update or extend the software, a technical supplement is included. 15 figs.; 8 refs

  4. User's guide for the triple-axis spectrometer HB3

    International Nuclear Information System (INIS)

    Vlak, W.A.H.M.; Frikkee, E.

    1986-11-01

    This report serves as a manual for the users of the triple-axis spectrometer installed at beamport HB3 of the High Flux Reactor in Petten. The main part of the text is devoted to the control of the spectrometer operation and the data handling by means of a PDP 11/23 computer. The various options are implemented in a collection of menu-driven and command-driven programs which utilise the flexibility of the RSX-11M operating system without requiring detailed knowledge of the user about this system. For the convenience of the experienced user, who might wish to update or extend the software, a technical supplement is included. (Auth.)

  5. Users guide for seeds of western trees and shrubs.

    Science.gov (United States)

    William I. Stein; Rodger Danielson; Nancy Shaw; Scott Wolff; David. Gerdes

    1986-01-01

    Because the role of tree and shrub seed is indispensable in the renewal of forests and ranges, their identity and quality are critically important. This guide briefly covers recommended practices for maintaining the identity of seeds, for sampling them, and for testing them for quality. Practices associated with the testing and use of tree seed have developed over many...

  6. FANS-3D Users Guide (ESTEP Project ER 201031)

    Science.gov (United States)

    2016-08-01

    TECHNICAL DOCUMENT 3293 August 2016 FANS -3D User’s Guide (ESTEP Project ER-201031) Pei-Fang Wang SSC Pacific Hamn-Ching...1.1 THEORY AND NUMERICAL ALGORITHM OF FANS CODE ............................................. 1 2. FANS -3D SOFTWARE DOCUMENTATION AND EXECUTION...5 3. FANS -3D CODE PARALLELIZATION

  7. Users Guide for the Strategic Thinking Mindset Test (STMT)

    Science.gov (United States)

    2017-06-01

    judgment test, intellectual flexibility, intellectual humility, intellectual inclusiveness, assessment, talent management SECURITY...38 vi 1 User’s Guide for the Strategic Thinking Mindset Test Overview Talent management ...thinking. The scenario-based assessment features complex and ambiguous problem scenarios from real events in the experience of Army leaders. The

  8. Xyce Parallel Electronic Simulator Users Guide Version 6.2.

    Energy Technology Data Exchange (ETDEWEB)

    Keiter, Eric R.; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Sholander, Peter E.; Thornquist, Heidi K.; Verley, Jason C.; Baur, David Gregory

    2014-09-01

    This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been de- signed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: Capability to solve extremely large circuit problems by supporting large-scale parallel com- puting platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. Device models that are specifically tailored to meet Sandia's needs, including some radiation- aware devices (for Sandia users only). Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase -- a message passing parallel implementation -- which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows. Trademarks The information herein is subject to change without notice. Copyright c 2002-2014 Sandia Corporation. All rights reserved. Xyce TM Electronic Simulator and Xyce TM are trademarks of Sandia Corporation. Portions of the Xyce TM code are: Copyright c 2002, The Regents of the University of California. Produced at the Lawrence Livermore National Laboratory. Written by Alan Hindmarsh, Allan Taylor, Radu Serban. UCRL-CODE-2002-59 All rights reserved. Orcad, Orcad Capture, PSpice and Probe are

  9. Xyce Parallel Electronic Simulator Users Guide Version 6.4

    Energy Technology Data Exchange (ETDEWEB)

    Keiter, Eric R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mei, Ting [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Russo, Thomas V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schiek, Richard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sholander, Peter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Thornquist, Heidi K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Verley, Jason [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Baur, David Gregory [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been de- signed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: Capability to solve extremely large circuit problems by supporting large-scale parallel com- puting platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. Device models that are specifically tailored to meet Sandia's needs, including some radiation- aware devices (for Sandia users only). Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase -- a message passing parallel implementation -- which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows. Trademarks The information herein is subject to change without notice. Copyright c 2002-2015 Sandia Corporation. All rights reserved. Xyce TM Electronic Simulator and Xyce TM are trademarks of Sandia Corporation. Portions of the Xyce TM code are: Copyright c 2002, The Regents of the University of California. Produced at the Lawrence Livermore National Laboratory. Written by Alan Hindmarsh, Allan Taylor, Radu Serban. UCRL-CODE-2002-59 All rights reserved. Orcad, Orcad Capture, PSpice and Probe are

  10. User acceptance testing a step-by-step guide

    CERN Document Server

    Hambling, Brian

    2013-01-01

    Every information system brought into service in every type of organisation requires user acceptance testing. This book is a hands-on manual for non-testing specialists to plan and carry out an effective acceptance test of an information system. It also identifies ways of making the process as simple and cost-effective as possible.

  11. CATO--A Guided User Interface for Different CAS

    Science.gov (United States)

    Janetzko, Hans-Dieter

    2017-01-01

    CATO is a new user interface, written in Java and developed by the author as a response to the significant difficulties faced by students who only sporadically use computer algebra systems (CAS). The usage of CAS in mathematical lectures should be an integral part of mathematical instruction. However, difficulties arise for those students who have…

  12. Acceptance of Dog Guides and Daily Stress Levels of Dog Guide Users and Nonusers

    Science.gov (United States)

    Matsunaka, Kumiko; Koda, Naoko

    2008-01-01

    The degree of acceptance of dog guides at public facilities, which is required by law in Japan, was investigated, and evidence of rejection was found. Japanese people with visual impairments who used dog guides reported higher daily stress levels than did those who did not use dog guides. (Contains 3 tables and 1 figure.)

  13. Federal Information Exchange (FEDIX) user`s guide: Fall 1993, Version 5.0/Release 1.0

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    FEDIX is an on-line information service that links the educational community and the federal government to facilitate research, education, and services. The system provides accurate and timely federal agency information to colleges, universities, and other research organizations. This guide is intended to help users access and utilize the FEDIX system. Because the system is frequently updated, however, some menus and tables used as examples in this text may not exactly match those displayed on the live system.

  14. PdWriter. Technical Reference and User’s Guide

    Science.gov (United States)

    1994-05-01

    Assistant Labor Relations Assistant Employee Development Assistant Add (Typing), ( Stenography ), (Data Transcribing), or (Office Automation(OA)) when...Procedural functions. B. Administrative functions. C. Typing. D. Stenography . E. Supervision of 1 or 2 other employees. Evaluation Data: The automated...after the series title, e.g., Supply Clerk (Typing). Typing work is evaluated using the Typing and Stenography Grade Evaluation Guide, which is

  15. User guide to power management for PCs and monitors

    Energy Technology Data Exchange (ETDEWEB)

    Nordman, B.; Piette, M.A.; Kinney, K.; Webber, C. [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technologies Div.

    1997-01-01

    Power management of personal computers (PCs) and monitors has the potential to save significant amounts of electricity as well as deliver other economic and environmental benefits. The Environmental Protection Agency`s ENERGY STAR{reg_sign} program has transformed the PC market so that equipment capable of power management is now widely available. However, previous studies have found that many Energy Star compliant computer systems are not accomplishing energy savings. The principal reasons for this are systems not being enabled for power management or a circumstance that prevents power management from operating. This guide is intended to provide information to computer support workers to increase the portion of systems that successfully power manage. The guide introduces power management concepts and the variety of benefits that power management can bring. It then explains how the parts of a computer system work together to enter and leave power management states. Several common computer system types are addressed, as well as the complications that networks bring to power management. Detailed instructions for checking and configuring several system types are provided, along with trouble shooting advice. The guide concludes with a discussion of how to purchase Energy Star compliant systems and future directions for power management of PCs and related equipment.

  16. The complete guide to blender graphics computer modeling and animation

    CERN Document Server

    Blain, John M

    2014-01-01

    Smoothly Leads Users into the Subject of Computer Graphics through the Blender GUIBlender, the free and open source 3D computer modeling and animation program, allows users to create and animate models and figures in scenes, compile feature movies, and interact with the models and create video games. Reflecting the latest version of Blender, The Complete Guide to Blender Graphics: Computer Modeling & Animation, 2nd Edition helps beginners learn the basics of computer animation using this versatile graphics program. This edition incorporates many new features of Blender, including developments

  17. Eye tracking the user experience a practical guide to research

    CERN Document Server

    Bojko, Aga

    2013-01-01

    Eye tracking is a widely used research method, but there are many questions and misconceptions about how to effectively apply it. Eye Tracking the User Experience the first how-to book about eye tracking for UX practitioners offers step-by-step advice on how to plan, prepare, and conduct eye tracking studies; how to analyze and interpret eye movement data; and how to successfully communicate eye tracking findings.

  18. IceT users' guide and reference.

    Energy Technology Data Exchange (ETDEWEB)

    Moreland, Kenneth D.

    2009-06-01

    The Image Composition Engine for Tiles (IceT) is a high-performance sort-last parallel rendering library. In addition to providing accelerated rendering for a standard display, IceT provides the unique ability to generate images for tiled displays. The overall resolution of the display may be several times larger than any viewport that may be rendered by a single machine. This document is an overview of the user interface to IceT.

  19. IceT users' guide and reference.

    Energy Technology Data Exchange (ETDEWEB)

    Moreland, Kenneth D.

    2011-01-01

    The Image Composition Engine for Tiles (IceT) is a high-performance sort-last parallel rendering library. In addition to providing accelerated rendering for a standard display, IceT provides the unique ability to generate images for tiled displays. The overall resolution of the display may be several times larger than any viewport that may be rendered by a single machine. This document is an overview of the user interface to IceT.

  20. Guide to user facilities at the Lawrence Berkeley Laboratory

    International Nuclear Information System (INIS)

    1984-04-01

    Lawrence Berkeley Laboratories' user facilities are described. Specific facilities include: the National Center for Electron Microscopy; the Bevalac; the SuperHILAC; the Neutral Beam Engineering Test Facility; the National Tritium Labeling Facility; the 88 inch Cyclotron; the Heavy Charged-Particle Treatment Facility; the 2.5 MeV Van de Graaff; the Sky Simulator; the Center for Computational Seismology; and the Low Background Counting Facility

  1. Users and Programmers Guide for HPC Platforms in CIEMAT

    International Nuclear Information System (INIS)

    Munoz Roldan, A.

    2003-01-01

    This Technical Report presents a description of the High Performance Computing platforms available to researchers in CIEMAT and dedicated mainly to scientific computing. It targets to users and programmers and tries to help in the processes of developing new code and porting code across platforms. A brief review is also presented about historical evolution in the field of HPC, ie, the programming paradigms and underlying architectures. (Author) 32 refs

  2. Prediction of Wind Energy Resources (PoWER) Users Guide

    Science.gov (United States)

    2016-01-01

    ARL-TR-7573● JAN 2016 US Army Research Laboratory Prediction of Wind Energy Resources ( PoWER ) User’s Guide by David P Sauter...not return it to the originator. ARL-TR-7573 ● JAN 2016 US Army Research Laboratory Prediction of Wind Energy Resources ( PoWER ...2016 2. REPORT TYPE Final 3. DATES COVERED (From - To) 09/2015–11/2015 4. TITLE AND SUBTITLE Prediction of Wind Energy Resources ( PoWER ) User’s

  3. AutoMap User’s Guide 2009

    Science.gov (United States)

    2009-06-01

    Inflectional morphology describes predictable changes a word undergoes as a result of syntax (the plural and possessive form for nouns, and the past tense...after pluralizations). Derivational morphology may or may not affect a word’s meaning (e.g.; ’-ise’, ’-ship’). Although English is a relatively...COVERED 00-00-2009 to 00-00-2009 4. TITLE AND SUBTITLE AutoMap User’s Guide 2009 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER

  4. PC-1D installation manual and user's guide

    Energy Technology Data Exchange (ETDEWEB)

    Basore, P.A.

    1991-05-01

    PC-1D is a software package for personal computers that uses finite-element analysis to solve the fully-coupled two-carrier semiconductor transport equations in one dimension. This program is particularly useful for analyzing the performance of optoelectronic devices such as solar cells, but can be applied to any bipolar device whose carrier flows are primarily one-dimensional. This User's Guide provides the information necessary to install PC-1D, define a problem for solution, solve the problem, and examine the results. Example problems are presented which illustrate these steps. The physical models and numerical methods utilized are presented in detail. This document supports version 3.1 of PC-1D, which incorporates faster numerical algorithms with better convergence properties than previous versions of the program. 51 refs., 17 figs., 5 tabs.

  5. Modeling Users' Experiences with Interactive Systems

    CERN Document Server

    Karapanos, Evangelos

    2013-01-01

    Over the past decade the field of Human-Computer Interaction has evolved from the study of the usability of interactive products towards a more holistic understanding of how they may mediate desired human experiences.  This book identifies the notion of diversity in usersʼ experiences with interactive products and proposes methods and tools for modeling this along two levels: (a) interpersonal diversity in usersʽ responses to early conceptual designs, and (b) the dynamics of usersʼ experiences over time. The Repertory Grid Technique is proposed as an alternative to standardized psychometric scales for modeling interpersonal diversity in usersʼ responses to early concepts in the design process, and new Multi-Dimensional Scaling procedures are introduced for modeling such complex quantitative data. iScale, a tool for the retrospective assessment of usersʼ experiences over time is proposed as an alternative to longitudinal field studies, and a semi-automated technique for the analysis of the elicited exper...

  6. User's guide to DOE facilities

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    The Department of Energy's research laboratories represent valuable, often unique, resources for university and industrial scientists. It is DOE policy to make these laboratories and facilities available to qualified scientists. The answers to such questions as who are eligible, what and where are the facilities, what is the cost, when can they be used, are given. Data sheets are presented for each facility to provide information such as location, user contact, description of research, etc. A subject index refers to areas of research and equipment available.

  7. User Guide for Automated Wetland Determination Data Sheets

    Science.gov (United States)

    2017-07-25

    profile, as indicated by a ferrous iron test or by the presence of a soil that changes color upon exposure to the air. “X” generated from Profile...above. Application of the ADS requires users to start at a depth of zero. Soil color and contrast: Soil matrix and redox feature colors should be...entered using the format hue[space]value/chroma (e.g., 10YR 3/1). Soil colors on the gley pages have the hue chromas ranging from zero to two. For

  8. A users guide to the radioactive waste inventory program 'DATABASE'

    International Nuclear Information System (INIS)

    Prince, G.A.; Tymons, B.J.

    1984-09-01

    The program computes an inventory of radioactive waste accumulation in a form such that a variety of interrogation, collation and summary functions can be used to access the stored information. Database is designed to be used online, that is the user will communicate with it at a computer terminal, and the program will display the result of each enquiry. It has the potential to automate much of the searching and adding up which was involved in compiling and using waste inventories in the past. (author)

  9. User's guide for the REBUS-3 fuel cycle analysis capability

    International Nuclear Information System (INIS)

    Toppel, B.J.

    1983-03-01

    REBUS-3 is a system of programs designed for the fuel-cycle analysis of fast reactors. This new capability is an extension and refinement of the REBUS-3 code system and complies with the standard code practices and interface dataset specifications of the Committee on Computer Code Coordination (CCCC). The new code is hence divorced from the earlier ARC System. In addition, the coding has been designed to enhance code exportability. Major new capabilities not available in the REBUS-2 code system include a search on burn cycle time to achieve a specified value for the multiplication constant at the end of the burn step; a general non-repetitive fuel-management capability including temporary out-of-core fuel storage, loading of fresh fuel, and subsequent retrieval and reloading of fuel; significantly expanded user input checking; expanded output edits; provision of prestored burnup chains to simplify user input; option of fixed-or free-field BCD input formats; and, choice of finite difference, nodal or spatial flux-synthesis neutronics in one-, two-, or three-dimensions

  10. AirShow 1.0 CFD Software Users' Guide

    Science.gov (United States)

    Mohler, Stanley R., Jr.

    2005-01-01

    AirShow is visualization post-processing software for Computational Fluid Dynamics (CFD). Upon reading binary PLOT3D grid and solution files into AirShow, the engineer can quickly see how hundreds of complex 3-D structured blocks are arranged and numbered. Additionally, chosen grid planes can be displayed and colored according to various aerodynamic flow quantities such as Mach number and pressure. The user may interactively rotate and translate the graphical objects using the mouse. The software source code was written in cross-platform Java, C++, and OpenGL, and runs on Unix, Linux, and Windows. The graphical user interface (GUI) was written using Java Swing. Java also provides multiple synchronized threads. The Java Native Interface (JNI) provides a bridge between the Java code and the C++ code where the PLOT3D files are read, the OpenGL graphics are rendered, and numerical calculations are performed. AirShow is easy to learn and simple to use. The source code is available for free from the NASA Technology Transfer and Partnership Office.

  11. Considering the effects purchase food balance guide utilizing cable television has on the user.

    Science.gov (United States)

    Sato, Kimiko; Hosokawa, Atsushi; Sugiyama, Masumi; Moriwaki, Hiroko; Nakamura, Masaru; Takenori, Tatsuaki; Mikami, Hiroshi; Kihara, Kazumitsu; Ono, Takeya

    2014-01-01

    The aim of this study was to empirically investigate the needfulness of the Purchased Foodstuffs Balance Guide as designed for its users and also consider its influence on better dietary habits. The participants included 89 students who attended City A's Senior Citizens' College, and the reality of their ICT and dietary habits were surveyed. Next, 27 cable television subscribers were asked to be monitors for testing the Guide. The study took place during a period of September 2013 to March 2014. The results indicated that, for the senior citizens, ICT use was centred on communication with their families and that their awareness or desire was a low in terms of the functions of information transmission, entertainment and receipt of services. Next, after using the Purchased Foodstuffs Balance Guide, its needfulness and its influence on better food habits were examined. As a result, the most frequent response by the participants was that they 'understood [their own] purchasing tendencies' (36.0%), followed by the three items: 'The Guide is useful for managing my nutrition', 'The Guide enabled me to know what foodstuffs are required to supplement my diet' and 'I became more careful about purchasing foodstuffs in a balanced way.' The study showed that 70% of the participants felt that the Purchased Foodstuffs Balance Guide was useful and make decisions when purchasing food using the Guide. This indicates the possibility that the Guide exerts a positive influence on users' awareness of nutritional balance, foodstuff purchasing choices and dietary habits.

  12. Propulsion Diagnostic Method Evaluation Strategy (ProDiMES) User's Guide

    Science.gov (United States)

    Simon, Donald L.

    2010-01-01

    This report is a User's Guide for the Propulsion Diagnostic Method Evaluation Strategy (ProDiMES). ProDiMES is a standard benchmarking problem and a set of evaluation metrics to enable the comparison of candidate aircraft engine gas path diagnostic methods. This Matlab (The Mathworks, Inc.) based software tool enables users to independently develop and evaluate diagnostic methods. Additionally, a set of blind test case data is also distributed as part of the software. This will enable the side-by-side comparison of diagnostic approaches developed by multiple users. The Users Guide describes the various components of ProDiMES, and provides instructions for the installation and operation of the tool.

  13. User guide for the POLARIS powder diffractometer at ISIS

    International Nuclear Information System (INIS)

    Hull, S.; Mayers, J.

    1989-11-01

    The POLARIS spectrometer at ISIS is currently being scheduled for use as a high intensity, medium resolution powder diffractometer. The particularly high neutron flux on POLARIS enables experiments to be performed with comparatively short counting times or on small sample volumes. This ability has been exploited during kinetic experiments of phase changes, where diffraction data is collected whilst the furnace is heating up. The provision of a large detector bank at 2 θ ∼ 90 0 is particularly important for studies of powder samples at high pressures. This scattering geometry has significant advantages for experiments of this kind, as suitable collimation of the incident and outgoing beams eliminates scattering from the surrounding pressure transmitting medium. This guide is intended to give a short description of the POLARIS powder diffractometer and to provide the basic information required to perform a powder diffraction experiment. (author)

  14. A user's guide of a plotting program PLTJOINT

    International Nuclear Information System (INIS)

    Sasaki, Makoto; Sato, Wakaei; Nakagawa, Masayuki; Mori, Takamasa

    1988-02-01

    A plotting program PLTJOINT is able to plot various types of input and output data from neutronics calculations with two dimensional coordinates. These data include cross sections, neutron flux or spectrum, reaction rate distribution and auxiliary data. These are read from the input and output files of the JOINT system and the transport code system using double differential form cross section, and from arbitrary BCD input file. General purpose option is also available. Much care is taken in lettering such as types of characters (italic, Greek letters and characters), super and subscript of alphabet and numeral. Users can design their own characters by using a program IGDRASIL. Most of input data can be read in free format. The code has been programed so flexibly that new functions can be easily added to. (author)

  15. Replacement Energy Cost Analysis Package (RECAP): User's guide. Revision 1

    International Nuclear Information System (INIS)

    VanKuiken, J.C.; Willing, D.L.

    1994-07-01

    A microcomputer program called the Replacement Energy Cost Analysis Package (RECAP) has been developed to assist the US Nuclear Regulatory Commission (NRC) in determining the replacement energy costs associated with short-term shutdowns or deratings of one or more nuclear reactors. The calculations are based on the seasonal, unit-specific cost estimates for 1993--1996 previously published in NRC Report NUREG/CR--4012, Vol. 3 (1992), for all 112 US reactors. Because the RECAP program is menu-driven, the user can define specific case studies in terms of such parameters as the units to be included, the length and timing of the shutdown or derating period, the unit capacity factors, and the reference year for reporting cost results. In addition to simultaneous shutdown cases, more complicated situations, such as overlapping shutdown periods or shutdowns that occur in different years, can be examined through the use of a present-worth calculation option

  16. Evidence of absence (v2.0) software user guide

    Science.gov (United States)

    Dalthorp, Daniel; Huso, Manuela; Dail, David

    2017-07-06

    Evidence of Absence software (EoA) is a user-friendly software application for estimating bird and bat fatalities at wind farms and for designing search protocols. The software is particularly useful in addressing whether the number of fatalities is below a given threshold and what search parameters are needed to give assurance that thresholds were not exceeded. The software also includes tools (1) for estimating carcass persistence distributions and searcher efficiency parameters ( and ) from field trials, (2) for projecting future mortality based on past monitoring data, and (3) for exploring the potential consequences of various choices in the design of long-term incidental take permits for protected species. The software was designed specifically for cases where tolerance for mortality is low and carcass counts are small or even 0, but the tools also may be used for mortality estimates when carcass counts are large.

  17. State criminal justice telecommunications (STACOM). Volume 4: Network design software user's guide

    Science.gov (United States)

    Lee, J. J.

    1977-01-01

    A user's guide to the network design program is presented. The program is written in FORTRAN V and implemented on a UNIVAC 1108 computer under the EXEC-8 operating system which enables the user to construct least-cost network topologies for criminal justice digital telecommunications networks. A complete description of program features, inputs, processing logic, and outputs is presented, and a sample run and a program listing are included.

  18. Standard guide for use of modeling for passive gamma measurements

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This guide addresses the use of models with passive gamma-ray measurement systems. Mathematical models based on physical principles can be used to assist in calibration of gamma-ray measurement systems and in analysis of measurement data. Some nondestructive assay (NDA) measurement programs involve the assay of a wide variety of item geometries and matrix combinations for which the development of physical standards are not practical. In these situations, modeling may provide a cost-effective means of meeting user’s data quality objectives. 1.2 A scientific knowledge of radiation sources and detectors, calibration procedures, geometry and error analysis is needed for users of this standard. This guide assumes that the user has, at a minimum, a basic understanding of these principles and good NDA practices (see Guide C1592), as defined for an NDA professional in Guide C1490. The user of this standard must have at least a basic understanding of the software used for modeling. Instructions or further train...

  19. Establishing user needs for a stability assessment tool to guide wheelchair prescription.

    Science.gov (United States)

    Moody, Louise; Evans, Jill; Fielden, Simon; Heelis, Mike; Dryer, Paul; Shapcott, Nigel; Magee, Paul; Stefanov, Dimitar

    2017-01-01

    The WheelSense project aims to develop a system for assessing the stability and performance of wheelchairs through a user-centred design process. This study sought to capture user needs and define the specification for the system. A mixed methods approach was adopted. An online survey was completed by 98 participants working in wheelchair provision. The results were built upon through 10 semi-structured interviews and one focus group (n = 5) with professionals working in wheelchair provision in three NHS Trusts in the UK. The results provided a picture of the current UK practice in stability testing. Issues with the reliability and usefulness of the existing methods used to assess the stability and performance of wheelchairs were highlighted. Requirements for a new system were ascertained. These included improved accuracy of tipping angles, features to support record keeping, improved client/carer education support and ability to model or predict client-wheelchair system performance in different configurations. The paper concludes that there is a need for improved tools to determine the stability of the client-wheelchair system and support the prescription process, to ensure client safety and optimum equipment performance. A list of requirements has been produced to guide the future development of WheelSense. Implications for Rehabilitation The results of this survey and interview-based study present a picture of wheelchair stability testing practices in the UK, and highlight the need for new, more informative methods for guiding wheelchair prescription. The requirements for the design of a new system, or further development of existing tools to support the stability testing and prescription of wheelchairs have been established.

  20. OVIS 3.2 user's guide.

    Energy Technology Data Exchange (ETDEWEB)

    Mayo, Jackson R.; Gentile, Ann C.; Brandt, James M.; Houf, Catherine A.; Thompson, David C.; Roe, Diana C.; Wong, Matthew H.; Pebay, Philippe Pierre

    2010-10-01

    This document describes how to obtain, install, use, and enjoy a better life with OVIS version 3.2. The OVIS project targets scalable, real-time analysis of very large data sets. We characterize the behaviors of elements and aggregations of elements (e.g., across space and time) in data sets in order to detect meaningful conditions and anomalous behaviors. We are particularly interested in determining anomalous behaviors that can be used as advance indicators of significant events of which notification can be made or upon which action can be taken or invoked. The OVIS open source tool (BSD license) is available for download at ovis.ca.sandia.gov. While we intend for it to support a variety of application domains, the OVIS tool was initially developed for, and continues to be primarily tuned for, the investigation of High Performance Compute (HPC) cluster system health. In this application it is intended to be both a system administrator tool for monitoring and a system engineer tool for exploring the system state in depth. OVIS 3.2 provides a variety of statistical tools for examining the behavior of elements in a cluster (e.g., nodes, racks) and associated resources (e.g., storage appliances and network switches). It provides an interactive 3-D physical view in which the cluster elements can be colored by raw or derived element values (e.g., temperatures, memory errors). The visual display allows the user to easily determine abnormal or outlier behaviors. Additionally, it provides search capabilities for certain scheduler logs. The OVIS capabilities were designed to be highly interactive - for example, the job search may drive an analysis which in turn may drive the user generation of a derived value which would then be examined on the physical display. The OVIS project envisions the capabilities of its tools applied to compute cluster monitoring. In the future, integration with the scheduler or resource manager will be included in a release to enable intelligent

  1. The 1991 version of the plume impingement computer program. Volume 2: User's input guide

    Science.gov (United States)

    Bender, Robert L.; Somers, Richard E.; Prendergast, Maurice J.; Clayton, Joseph P.; Smith, Sheldon D.

    1991-01-01

    The Plume Impingement Program (PLIMP) is a computer code used to predict impact pressures, forces, moments, heating rates, and contamination on surfaces due to direct impingement flowfields. Typically, it has been used to analyze the effects of rocket exhaust plumes on nearby structures from ground level to the vacuum of space. The program normally uses flowfields generated by the MOC, RAMP2, SPF/2, or SFPGEN computer programs. It is capable of analyzing gaseous and gas/particle flows. A number of simple subshapes are available to model the surfaces of any structure. The original PLIMP program has been modified many times of the last 20 years. The theoretical bases for the referenced major changes, and additional undocumented changes and enhancements since 1988 are summarized in volume 1 of this report. This volume is the User's Input Guide and should be substituted for all previous guides when running the latest version of the program. This version can operate on VAX and UNIX machines with NCAR graphics ability.

  2. User guide for luminescence sampling in archaeological and geological contexts

    Science.gov (United States)

    Nelson, Michelle S.; Gray, Harrison J.; Johnson, Jack A.; Rittenour, Tammy M.; Feathers, James K.; Mahan, Shannon

    2015-01-01

    Luminescence dating provides a direct age estimate of the time of last exposure of quartz or feldspar minerals to light or heat and has been successfully applied to deposits, rock surfaces, and fired materials in a number of archaeological and geological settings. Sampling strategies are diverse and can be customized depending on local circumstances, although all sediment samples need to include a light-safe sample and material for dose-rate determination. The accuracy and precision of luminescence dating results are directly related to the type and quality of the material sampled and sample collection methods in the field. Selection of target material for dating should include considerations of adequacy of resetting of the luminescence signal (optical and thermal bleaching), the ability to characterize the radioactive environment surrounding the sample (dose rate), and the lack of evidence for post-depositional mixing (bioturbation in soils and sediment). Sample strategies for collection of samples from sedimentary settings and fired materials are discussed. This paper should be used as a guide for luminescence sampling and is meant to provide essential background information on how to properly collect samples and on the types of materials suitable for luminescence dating.

  3. User's guide for the Uranium Ore Reserve Calculation System (URAD)

    International Nuclear Information System (INIS)

    1988-12-01

    The URAD (Uranium Reserves and Data) system consists of four computer programs designed to facilitate the evaluation of uranium ore reserves analysis and the handling of basic uranium assay data. URAD is designed specifically as a training tool for anyone unfamiliar with the methodology, data requirements, and/or general computer applications in the field of uranium ore reserves analysis. However, it can effectively be used in a 'production' environment involving considerable amounts of data. The resulting programs are written in Microsoft FORTRAN (Version 3.1) and may be run on any IBM-compatible microcomputer under DOS 2.1 (or later). Only a basic working knowledge of DOS 2.1 is needed to maintain the system and run the programs. This guide includes the overview of the URAD system, the review of sample data and a complete description of the file structure and sample type formats of the basic sample data files. Program URDAT explains the initial processing of the primary UDAT files to obtain standard output listings and gamma-log interpretations of radiometric data, and to create intermediate UDAT files which are used by the ore reserves programs - RESUV, ORSAC, and SCOR. Figs and tabs

  4. Internet User Behaviour Model Discovery Process

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The Academy of Economic Studies has more than 45000 students and about 5000 computers with Internet access which are connected to AES network. Students can access internet on these computers through a proxy server which stores information about the way the Internet is accessed. In this paper, we describe the process of discovering internet user behavior models by analyzing proxy server raw data and we emphasize the importance of such models for the e-learning environment.

  5. User's guide for West Valley feed preparation code (RECIPE)

    International Nuclear Information System (INIS)

    Faletti, D.W.; Erb, T.A.; Harty, H.; LoPresti, C.A.

    1988-02-01

    The RECIPE code was developed by Pacific Northwest Laboratory under the West Valley Support Task of the Nuclear Waste Treatment Program. Additional chemicals must be added to the high-level wastes to produce an acceptable glass. To maintain the composition of the glass within the targeted compositional region, the chemical additions must be carefully controlled. The amounts and kinds of chemicals that will be required will vary from waste batch to waste batch because the composition and amount of waste will vary among batches, and because the composition of the additives will vary among additive batches. The RECIPE code was developed: to enable accurate computation of the amounts of additives required for a given batch of waste; and to determine whether a batch of slurry will indeed give an acceptable glass composition when mixed with the batch of waste created from the additives. In addition, RECIPE can conduct computations necessary for determining the amount and type of additives required to return an off-specification batch of feed or the melter contents to tolerance levels. This report provides the user with an overview of the glass-making process and RECIPE's role in it, and sufficient information that, when combined with the extensive documentation within the source code, the RECIPE code can be used, maintained, and modified. 3 tabs

  6. Mustafa environment description and users' guide with applications to CLIC

    CERN Document Server

    Guignard, Gilbert

    1998-01-01

    In the main linacs of future linear colliders, the control of the emittances and the stability of a train of bunches are critical. It was therefore important for the Compact Linear Collider study (CLIC) to have a tool allowing numerical investigations of these questions. An interactive environment called MUSTAFA (MUltibunch Simulation and Tracking Algorithm for Future Accelerators) has been created and different tools have been developed over the time according to the needs. Progressively, these code and interactive facilities evolved into two main features, their portability on PCs independent from the main frame computers and their analysis capability using animated graphics. All the codes have been written under the MS-DOS operating system. The main application MBTR has been written in FORTRAN, the animated graphics facility MOVIE and the so-called MBUNCH utility program in QUICKBASIC (MS V4.5). The MBUNCH code was created in order to manage in a user friendly set-up the other two mentioned as well as the ...

  7. Hanford Environmental Information System (HEIS). Volume 1, User`s guide

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-14

    The Hanford Environmental Information System (HEIS) is a consolidated set of automated resources that effectively manage the data gathered during environmental monitoring and restoration of the Hanford Site. HEIS includes an integrated database that provides consistent and current data to all users and promotes sharing of data by the entire user community. HEIS is an information system with an inclusive database. Although the database is the nucleus of the system, HEIS also provides user access software: query-by-form data entry, extraction, and browsing facilities; menu-driven reporting facilities; an ad hoc query facility; and a geographic information system (GIS). These features, with the exception of the GIS, are described in this manual set. Because HEIS contains data from the entire Hanford Site, many varieties of data are included and have.been divided into subject areas. Related subject areas comprise several volumes of the manual set. The manual set includes a data dictionary that lists all of the fields in the HEIS database, with their definitions and a cross reference of their locations in the database; definitions of data qualifiers for analytical results; and a mapping between the HEIS software functions and the keyboard keys for each of the supported terminals or terminal emulators.

  8. A User Guide for Smoothing Air Traffic Radar Data

    Science.gov (United States)

    Bach, Ralph E.; Paielli, Russell A.

    2014-01-01

    Matlab software was written to provide smoothing of radar tracking data to simulate ADS-B (Automatic Dependent Surveillance-Broadcast) data in order to test a tactical conflict probe. The probe, called TSAFE (Tactical Separation-Assured Flight Environment), is designed to handle air-traffic conflicts left undetected or unresolved when loss-of-separation is predicted to occur within approximately two minutes. The data stream that is down-linked from an aircraft equipped with an ADS-B system would include accurate GPS-derived position and velocity information at sample rates of 1 Hz. Nation-wide ADS-B equipage (mandated by 2020) should improve surveillance accuracy and TSAFE performance. Currently, position data are provided by Center radar (nominal 12-sec samples) and Terminal radar (nominal 4.8-sec samples). Aircraft ground speed and ground track are estimated using real-time filtering, causing lags up to 60 sec, compromising performance of a tactical resolution tool. Offline smoothing of radar data reduces wild-point errors, provides a sample rate as high as 1 Hz, and yields more accurate and lag-free estimates of ground speed, ground track, and climb rate. Until full ADS-B implementation is available, smoothed radar data should provide reasonable track estimates for testing TSAFE in an ADS-B-like environment. An example illustrates the smoothing of radar data and shows a comparison of smoothed-radar and ADS-B tracking. This document is intended to serve as a guide for using the smoothing software.

  9. Plan recognition in modelling of users

    International Nuclear Information System (INIS)

    Hollnagel, E.

    1988-01-01

    In order for an Intelligent Decision Support System to interact properly with a user, it must know what the user is doing. Accident Sequence Modelling (ASM) provides a possible frame of reference for monitoring operator activities, but it cannot be used directly: (1) operators may deviate from the scenario described in ASM, (2) the actual situation may develop differently from the scenario, (3) operators are normally involved in several activities at the same time, and (4) modelling of operator activities must focus on the level of individual actions, while the ASM only addresses the global view. The reference provided by the ASM scenario must therefore be supplemented by a more direct modelling of what the operator does. This requires a recognition of the operator's current plans, i.e. his goals and the strategies he employs to reach them. The paper describes a programme to develop an expert system that does this, within the ESPRIT project Graphical Dialogue Environment. (author)

  10. Visiting cultural heritage with a tour guide robot : a user evaluation study in-the-wild

    NARCIS (Netherlands)

    Karreman, Daphne; Ludden, Geke; Evers, Vanessa; Tapus, Adriana; André, Elisabeth; Martin, Jean-Claude; Ferland, François; Ammi, Mehdi

    2015-01-01

    In this paper we present a user evaluation study on location at the Royal Alcázar in Seville, Spain, with the fully autonomous tour guide robot FROG. In this robot, technological innovations in navigation and vision were integrated with state-of-the-art design for robot behavior in order to provide

  11. Contraception for the first time users: a problem-orientated guide to ...

    African Journals Online (AJOL)

    Contraception for the first time users: a problem-orientated guide to product selection and safe prescription. W M Kruger, O S Steyn. Abstract. No Abstract South African Family Practice Vol. 49 (8) 2007: pp.44-50. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL ...

  12. The 2009 High School Transcript Study User's Guide. NCES 2011-465

    Science.gov (United States)

    Nord, C.; Hicks, L.; Hoover, K.; Jones, M.; Lin, A.; Lyons, M.; Perkins, R.; Roey, S.; Rust, K.; Sickles, D.

    2011-01-01

    This user's guide documents the procedures used to collect, process, and summarize data from the 2009 High School Transcript Study (HSTS 2009). Chapters detail the sampling of schools and graduates (chapters 2 and 3), data collection procedures (chapter 4), data processing procedures (chapter 5), and weighting procedures (chapter 6). Chapter 7…

  13. U.S. TIMSS and PIRLS 2011 Technical Report and User's Guide. NCES 2013-046

    Science.gov (United States)

    Kastberg, David; Roey, Stephen; Ferraro, David; Lemanski, Nita; Erberber, Ebru

    2013-01-01

    The "U.S. TIMSS and PIRLS 2011 Technical Report and User's Guide" provides an overview of the design and implementation of the Trends in International Mathematics and Science Study (TIMSS) 2011 and the Progress in International Reading Literacy Study (PIRLS) 2011 in the United States and the nine participating benchmarking states:…

  14. TIMSS 2011 User Guide for the International Database. Supplement 2: National Adaptations of International Background Questionnaires

    Science.gov (United States)

    Foy, Pierre, Ed.; Arora, Alka, Ed.; Stanco, Gabrielle M., Ed.

    2013-01-01

    This supplement describes national adaptations made to the international version of the TIMSS 2011 background questionnaires. This information provides users with a guide to evaluate the availability of internationally comparable data for use in secondary analyses involving the TIMSS 2011 background variables. Background questionnaire adaptations…

  15. A users guide for the radioactive waste management code 'SIMULATION 2'

    International Nuclear Information System (INIS)

    Moore, D.; Tymons, B.J.

    1984-09-01

    This report is a users' guide to the radioactive waste management program SIMULATION. It gives a complete description of the calculational method used (with worked examples) a specification of the input data requirements, and samples of printout from the program. (author)

  16. Scheduling language and algorithm development study. Volume 2, phase 2: Introduction to plans programming. [user guide

    Science.gov (United States)

    Cochran, D. R.; Ishikawa, M. K.; Paulson, R. E.; Ramsey, H. R.

    1975-01-01

    A user guide for the Programming Language for Allocation and Network Scheduling (PLANS) is presented. Information is included for the construction of PLANS programs. The basic philosophy of PLANS is discussed, and access and update reference techniques are described along with the use of tree structures.

  17. Patriot Script 1.0.13 User Guide for PEM 1.3.2

    Energy Technology Data Exchange (ETDEWEB)

    Cleland, Timothy James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kubicek, Deborah Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Stroud, Phillip David [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cuellar-Hengartner, Leticia [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mathis, Mark [Descartes Labs, Inc., Los Alamos, NM (United States)

    2015-11-02

    This document provides an updated user guide for Patriot Script Version 1.0.13, for release with PEM 1.3.1 (LAUR-1422817) that adds description and instructions for the new excursion capability (see section 4.5.1).

  18. User`s guide for SDDS toolkit Version 1.4

    Energy Technology Data Exchange (ETDEWEB)

    Borland, M. [Argonne National Lab., IL (United States). Advanced Photon Source

    1995-07-06

    The Self Describing Data Sets (SDDS) file protocol is the basis for a powerful and expanding toolkit of over 40 generic programs. These programs are used for simulation postprocessing, graphics, data preparation, program interfacing, and experimental data analysis. This document describes Version 1.4 of the SDDS commandline toolkit. Those wishing to write programs using SDDS should consult the Application Programmer`s Guide for SDDS Version 1.4. The first section of the present document is shared with this reference. This document does not describe SDDS-compliant EPICS applications, of which there are presently 25.

  19. Evaluation of user-guided semi-automatic decomposition tool for hexahedral mesh generation

    Directory of Open Access Journals (Sweden)

    Jean Hsiang-Chun Lu

    2017-10-01

    Full Text Available Volumetric decomposition is essential for all-hexahedral mesh generation. Because fully automatic decomposition methods that can generate high-quality hexahedral meshes for arbitrary volumes have yet to be realized, manual decomposition is still required frequently. Manual decomposition is a laborious process and requires a high level of user expertise. Therefore, a user-guided semi-automatic tool to reduce the human effort and lower the requirement of expertise is necessary. To date, only a few of these approaches have been proposed, and a lack of user evaluation makes it difficult to improve upon this approach. Based on our previous work, we present a user evaluation of a user-guided semi-automatic tool that provides visual guidance to assist users in determining decomposition solutions, accepts sketch-based inputs to create decomposition surfaces, and simplifies the decomposition commands. This user evaluation investigated (1 the usability of the visual guidance, (2 the types of visual guidance essential for decomposition, (3 the effectiveness of the sketch-based decomposition, and (4 the performance differences between beginner and experienced users using the sketch-based decomposition. The result and user feedback indicate that the tool enables users who have limited prior experience or familiarity with the computer-aided engineering software to perform volumetric decomposition more efficiently. The visual guidance increases the success rate of the user’s decomposition solution by 28%. The sketch-based decomposition significantly reduces 46% of the user’s time on creating decomposition surfaces and setting up decomposition commands.

  20. Development of a user interface style guide for the reactor protection system cabinet operator module

    International Nuclear Information System (INIS)

    Lee, Hyun-Chul; Lee, Dong-Young; Lee, Jung-Woon

    2004-01-01

    The reactor protection system (RPS) plays the roles of generating the reactor trip signal and the engineered safety features (ESF) actuation signal when the monitored plant processes reach the predefined limits. A Korean project group is developing a new digitalized RPS and the Cabinet Operator Module (COM) of the RPS is used for the RPS integrity testing and monitoring by an equipment operator. A flat panel display (FPD) with a touch screen capability is provided as a main user interface for the RPS operation. To support the RPS COM user interface design, actually the FPD screen design, we developed a user interface style guide because the system designer could not properly deal with the many general human factors design guidelines. To develop the user interface style guide, various design guideline gatherings, a walk-though with a video recorder, guideline selection with respect to user interface design elements, determination of the properties of the design elements, discussion with system designers, and a conversion of the properties into the screen design were carried out. This paper describes the process details and the findings in the course of the style guide development. (Author)

  1. PRIM System: AN/UYK-20 User Guide and User Reference Manual

    Science.gov (United States)

    1977-10-01

    National Software Works) and the USC-ISIC 11 NCX system, which is a server system on the ARPANET. The user of PRIM is assumed to have access to one...register 1 should have been compared and found to be less than 80 (register 1). Consequently , the subroutine should now search the interval between...location of the trace. #Hre.ik (at) 0l23i:Q23i5o*<’ ( altar doing) Xecuta «"r f^/ode /nstructlon ^r mT’ypa fi>PC()IMcr if if 11 &PC <> 0I2M**C

  2. Flight Deck Interval Management Display. [Elements, Information and Annunciations Database User Guide

    Science.gov (United States)

    Lancaster, Jeff; Dillard, Michael; Alves, Erin; Olofinboba, Olu

    2014-01-01

    The User Guide details the Access Database provided with the Flight Deck Interval Management (FIM) Display Elements, Information, & Annunciations program. The goal of this User Guide is to support ease of use and the ability to quickly retrieve and select items of interest from the Database. The Database includes FIM Concepts identified in a literature review preceding the publication of this document. Only items that are directly related to FIM (e.g., spacing indicators), which change or enable FIM (e.g., menu with control buttons), or which are affected by FIM (e.g., altitude reading) are included in the database. The guide has been expanded from previous versions to cover database structure, content, and search features with voiced explanations.

  3. Generic Software Architecture for Prognostics (GSAP) User Guide

    Science.gov (United States)

    Teubert, Christopher Allen; Daigle, Matthew John; Watkins, Jason; Sankararaman, Shankar; Goebel, Kai

    2016-01-01

    The Generic Software Architecture for Prognostics (GSAP) is a framework for applying prognostics. It makes applying prognostics easier by implementing many of the common elements across prognostic applications. The standard interface enables reuse of prognostic algorithms and models across systems using the GSAP framework.

  4. Watershed Management Optimization Support Tool (WMOST) v3: User Guide

    Science.gov (United States)

    The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of management decisions in a watershed context that is, accou...

  5. The Johnson Space Center management information systems: User's guide to JSCMIS

    Science.gov (United States)

    Bishop, Peter C.; Erickson, Lloyd

    1990-01-01

    The Johnson Space Center Management Information System (JSCMIS) is an interface to computer data bases at the NASA Johnson Space Center which allows an authorized user to browse and retrieve information from a variety of sources with minimum effort. The User's Guide to JSCMIS is the supplement to the JSCMIS Research Report which details the objectives, the architecture, and implementation of the interface. It is a tutorial on how to use the interface and a reference for details about it. The guide is structured like an extended JSCMIS session, describing all of the interface features and how to use them. It also contains an appendix with each of the standard FORMATs currently included in the interface. Users may review them to decide which FORMAT most suits their needs.

  6. A users guide to the SIMULATION data assembler program

    International Nuclear Information System (INIS)

    Goodill, D.R.; Tymons, B.J.

    1984-09-01

    SIMULATION is a computer program that has been developed by Central Technical Services, UKAEA, Risley, to provide a method of analysis for any radioactive waste management system. The program models a complete system by taking any number of raw waste streams through any sequence of operations, such as treatment or conditioning, packaging or transport. Results are produced in terms of the quantity of waste in each store and the waste throughput of each process on a year by year basis. (author)

  7. User’s Guide for the Longitudinal Scalogram Analysis Program

    Science.gov (United States)

    1991-01-01

    Total n = 791. 0 = not passed, I = passed. Items am legal drugs , cannabis, pills, psychedelics , cocaine, and heroin. Asterisks denote longitudinal...ALERT to model stages of drug use involvement in adolescents. This revision of the original Note adds new information about the computation of...necessarily reflect the views of the sponsor or RAND. The program and this manual benefited from insightful comments by RAND colleagues John Uebersax

  8. The ORNL Modulating Heat Pump Design Tool User's Guide; TOPICAL

    International Nuclear Information System (INIS)

    Rice, C.K.

    2001-01-01

    The ORNL Modulating Heat Pump Design Tool consists of a Modulating HPDM (Heat Pump Design Model) and a parametric-analysis (contour-data generating) front-end. Collectively the program is also referred to as MODCON which is in reference to the modulating and the contour data generating capabilities. The program was developed by Oak Ridge National Laboratory for the Department of Energy to provide a publicly-available system design tool for variable- and single-speed heat pumps

  9. Adagio 4.18 user's guide.

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, Benjamin Whiting

    2010-09-01

    Adagio is a Lagrangian, three-dimensional, implicit code for the analysis of solids and structures. It uses a multi-level iterative solver, which enables it to solve problems with large deformations, nonlinear material behavior, and contact. It also has a versatile library of continuum and structural elements, and an extensive library of material models. Adagio is written for parallel computing environments, and its solvers allow for scalable solutions of very large problems. Adagio uses the SIERRA Framework, which allows for coupling with other SIERRA mechanics codes. This document describes the functionality and input structure for Adagio.

  10. TurbSim User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Jonkman, B. J.; Buhl, M. L., Jr.

    2005-09-01

    The TurbSim stochastic inflow turbulence code was developed to provide a numerical simulation of a full-field flow that contains coherent turbulence structures that reflect the proper spatiotemporal turbulent velocity field relationships seen in instabilities associated with nocturnal boundary layer flows that are not represented well by the IEC Normal Turbulence Models (NTM). Its purpose is to provide the wind turbine designer with the ability to drive design code (FAST or MSC.ADAMS) simulations of advanced turbine designs with simulated inflow turbulence environments that incorporate many of the important fluid dynamic features known to adversely affect turbine aeroelastic response and loading.

  11. Adagio 2.9 user's guide.

    Energy Technology Data Exchange (ETDEWEB)

    2008-05-01

    Adagio is a Lagrangian, three-dimensional, implicit code for the analysis of solids and structures. It uses a multi-level iterative solver, which enables it to solve problems with large deformations, nonlinear material behavior, and contact. It also has a versatile library of continuum and structural elements, and an extensive library of material models. Adagio is written for parallel computing environments, and its solvers allow for scalable solutions of very large problems. Adagio uses the SIERRA Framework, which allows for coupling with other SIERRA mechanics codes. This document describes the functionality and input structure for Adagio.

  12. Quantify uncertain emergency search techniques (QUEST) -- Theory and user's guide

    International Nuclear Information System (INIS)

    Johnson, M.M.; Goldsby, M.E.; Plantenga, T.D.; Porter, T.L.; West, T.H.; Wilcox, W.B.; Hensley, W.K.

    1998-01-01

    As recent world events show, criminal and terrorist access to nuclear materials is a growing national concern. The national laboratories are taking the lead in developing technologies to counter these potential threats to the national security. Sandia National laboratories, with support from Pacific Northwest National Laboratory and the Bechtel Nevada, Remote Sensing Laboratory, has developed QUEST (a model to Quantify Uncertain Emergency Search Techniques), to enhance the performance of organizations in the search for lost or stolen nuclear material. In addition, QUEST supports a wide range of other applications, such as environmental monitoring, nuclear facilities inspections, and searcher training. QUEST simulates the search for nuclear materials and calculates detector response for various source types and locations. The probability of detecting a radioactive source during a search is a function of many different variables, including source type, search location and structure geometry (including shielding), search dynamics (path and speed), and detector type and size. Through calculation of dynamic detector response, QUEST makes possible quantitative comparisons of various sensor technologies and search patterns. The QUEST model can be used as a tool to examine the impact of new detector technologies, explore alternative search concepts, and provide interactive search/inspector training

  13. Replacement Energy Cost Analysis Package (RECAP): User`s guide. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    VanKuiken, J.C.; Willing, D.L. [Argonne National Lab., IL (United States)

    1994-07-01

    A microcomputer program called the Replacement Energy Cost Analysis Package (RECAP) has been developed to assist the US Nuclear Regulatory Commission (NRC) in determining the replacement energy costs associated with short-term shutdowns or deratings of one or more nuclear reactors. The calculations are based on the seasonal, unit-specific cost estimates for 1993--1996 previously published in NRC Report NUREG/CR--4012, Vol. 3 (1992), for all 112 US reactors. Because the RECAP program is menu-driven, the user can define specific case studies in terms of such parameters as the units to be included, the length and timing of the shutdown or derating period, the unit capacity factors, and the reference year for reporting cost results. In addition to simultaneous shutdown cases, more complicated situations, such as overlapping shutdown periods or shutdowns that occur in different years, can be examined through the use of a present-worth calculation option.

  14. Darcy Tools version 3.4. User's Guide

    International Nuclear Information System (INIS)

    Svensson, Urban; Ferry, Michel

    2010-12-01

    DarcyTools is a computer code for simulation of flow and transport in porous and/or fractured media. The fractured media in mind is a fractured rock and the porous media the soil cover on the top of the rock; it is hence groundwater flows, which is the class of flows in mind. DarcyTools is developed by a collaborative effort by SKB (The Swedish Nuclear Fuel and Waste Management Company ), MFRDC (Michel Ferry RandD Consulting) and CFE AB (Computer-aided Fluid Engineering AB). It builds upon earlier development of groundwater models, carried out by CFE during the last twenty years. In the earlier work the CFD code PHOENICS (Spalding 1981) was used as an equation solver. DarcyTools is based on a solver called MIGAL (Ferry 2002). It has however been carefully evaluated that the two solvers produce very similar solutions and the earlier work is thus still valid as a background for DarcyTools. The present report will focus on the software that constitutes DarcyTools. Two accompanying reports cover other aspects: - Concepts, Methods and Equations. (Svensson et al. 2010) (Hereafter denoted Report 1). - Verification, Validation and Demonstration (Svensson 2010) (Hereafter denoted Report 2). Two basic approaches in groundwater modelling can be identified; in one we define grid cell conductivities (sometimes called the continuum porous-medium (CPM) approach, i.e. Jackson et al. 2000), in the other we calculate the flow through the fracture network directly (DFN approach). Both approaches have their merits and drawbacks, which however will not be discussed here (for a discussion, see Sahimi 1995). In DarcyTools the two approaches are combined, meaning that we first generate a fracture network and then represent the network as grid cell properties. Further background information is given in the two reports mentioned

  15. User's and reference guide to the INEL RML/analytical radiochemistry sample tracking database version 1.00

    International Nuclear Information System (INIS)

    Femec, D.A.

    1995-09-01

    This report discusses the sample tracking database in use at the Idaho National Engineering Laboratory (INEL) by the Radiation Measurements Laboratory (RML) and Analytical Radiochemistry. The database was designed in-house to meet the specific needs of the RML and Analytical Radiochemistry. The report consists of two parts, a user's guide and a reference guide. The user's guide presents some of the fundamentals needed by anyone who will be using the database via its user interface. The reference guide describes the design of both the database and the user interface. Briefly mentioned in the reference guide are the code-generating tools, CREATE-SCHEMA and BUILD-SCREEN, written to automatically generate code for the database and its user interface. The appendices contain the input files used by the these tools to create code for the sample tracking database. The output files generated by these tools are also included in the appendices

  16. User's guide for the BNW-III optimization code for modular dry/wet-cooled power plants

    Energy Technology Data Exchange (ETDEWEB)

    Braun, D.J.; Faletti, D.W.

    1984-09-01

    This user's guide describes BNW-III, a computer code developed by the Pacific Northwest Laboratory (PNL) as part of the Dry Cooling Enhancement Program sponsored by the US Department of Energy (DOE). The BNW-III code models a modular dry/wet cooling system for a nuclear or fossil fuel power plant. The purpose of this guide is to give the code user a brief description of what the BNW-III code is and how to use it. It describes the cooling system being modeled and the various models used. A detailed description of code input and code output is also included. The BNW-III code was developed to analyze a specific cooling system layout. However, there is a large degree of freedom in the type of cooling modules that can be selected and in the performance of those modules. The costs of the modules are input to the code, giving the user a great deal of flexibility.

  17. FIRINPC and FIRACPC graphics post-processor support user's guide and programmer's reference

    International Nuclear Information System (INIS)

    Hensel, E.

    1992-03-01

    FIRIN is a computer program used by DOE fire protection engineers to simulate hypothetical fire accidents in compartments at DOE facilities. The FIRIN code is typically used in conjunction with a ventilation system code such as FIRAC, which models the impact of the fire compartment upon the rest of the system. The code described here, FIRINPC is a PC based implementation of the full mainframe code FIRIN. In addition, FIRINPC contains graphics support for monitoring the progress of the simulation during execution and for reviewing the complete results of the simulation upon completion of the run. This document describes how to install, test, and subsequently use the code FIRINPC, and addresses differences in usage between the PC version of the code and its mainframe predecessor. The PC version contains all of the modeling capabilities of the earlier version, with additional graphics support. This user's guide is a supplement to the original FIRIN report published by the NRC. FIRAC is a computer program used by DOE fire protection engineers to simulate the transient response of complete ventilation system to fire induced transients. FIRAC has the ability to use the FIRIN code as the driving function or source term for the ventilation system response. The current version of FIRAC does not contain interactive graphics capabilities. A third program, called POST, is made available for reviewing the results of a previous FIRIN or FIRAC simulation, without having to recompute the numerical simulation. POST uses the output data files created by FIRINPC and FIRACPC to avoid recomputation

  18. User's guide for the GSMP/OCMHD system code

    Energy Technology Data Exchange (ETDEWEB)

    Dennis, C. B.; Berry, G. F.

    1980-12-01

    The Systems Analysis group of the ANL Engineering Division conducts overall system studies for various power plant concepts, utilizing a computer simulation code. Analytical investigations explore a range of possible performance variables, in order to determine the sensitivity of a specific plant design to variation in key system parameters and, ultimately, to establish probable system performance limits. To accomplish this task, a Generalized System Modeling Program (GSMP) has been developed that will analyze and simulate the particular system of interest for any number of different configurations, automatically holding constraints while conducting either sensitivity studies or optimizations. One system investigated, while developing the ANL/GSMP code, is an open-cycle magneto-hydrodynamic (OCMHD) power plant. By linking mathematical models representing these OCMHD power plant components to the executive level GSMP driver the resulting system code, GSMP/OCMHD, can be used to simulate any OCMHD power plant configuration. This report, a user's guide for GSMP/OCMHD, describes the process for setting up an OCMHD configuration, preparing the input defining that configuration, running the computer code and interpreting the results generated.

  19. Geothermal loan guaranty cash flow model: description and users' manual

    Energy Technology Data Exchange (ETDEWEB)

    Keimig, M.A.; Rosenberg, J.I.; Entingh, D.J.

    1980-11-01

    This is the users guide for the Geothermal Loan Guaranty Cash Flow Model (GCFM). GCFM is a Fortran code which designs and costs geothermal fields and electric power plants. It contains a financial analysis module which performs life cycle costing analysis taking into account various types of taxes, costs and financial structures. The financial module includes a discounted cash flow feature which calculates a levelized breakeven price for each run. The user's guide contains descriptions of the data requirements and instructions for using the model.

  20. Low-Speed Fingerprint Image Capture System User`s Guide, June 1, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Whitus, B.R.; Goddard, J.S.; Jatko, W.B.; Manges, W.W.; Treece, D.A.

    1993-06-01

    The Low-Speed Fingerprint Image Capture System (LS-FICS) uses a Sun workstation controlling a Lenzar ElectroOptics Opacity 1000 imaging system to digitize fingerprint card images to support the Federal Bureau of Investigation`s (FBI`s) Automated Fingerprint Identification System (AFIS) program. The system also supports the operations performed by the Oak Ridge National Laboratory- (ORNL-) developed Image Transmission Network (ITN) prototype card scanning system. The input to the system is a single FBI fingerprint card of the agreed-upon standard format and a user-specified identification number. The output is a file formatted to be compatible with the National Institute of Standards and Technology (NIST) draft standard for fingerprint data exchange dated June 10, 1992. These NIST compatible files contain the required print and text images. The LS-FICS is designed to provide the FBI with the capability of scanning fingerprint cards into a digital format. The FBI will replicate the system to generate a data base of test images. The Host Workstation contains the image data paths and the compression algorithm. A local area network interface, disk storage, and tape drive are used for the image storage and retrieval, and the Lenzar Opacity 1000 scanner is used to acquire the image. The scanner is capable of resolving 500 pixels/in. in both x and y directions. The print images are maintained in full 8-bit gray scale and compressed with an FBI-approved wavelet-based compression algorithm. The text fields are downsampled to 250 pixels/in. and 2-bit gray scale. The text images are then compressed using a lossless Huffman coding scheme. The text fields retrieved from the output files are easily interpreted when displayed on the screen. Detailed procedures are provided for system calibration and operation. Software tools are provided to verify proper system operation.

  1. RELAP5/MOD3 code manual: User`s guide and input requirements. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    The RELAP5 code has been developed for best estimate transient simulation of light water reactor coolant systems during postulated accidents. The code models the coupled behavior of the reactor coolant system and the core for loss-of-coolant accidents, and operational transients, such as anticipated transient without scram, loss of offsite power, loss of feedwater, and loss of flow. A generic modeling approach is used that permits simulating a variety of thermal hydraulic systems. Control system and secondary system components are included to permit modeling of plant controls, turbines, condensers, and secondary feedwater systems. Volume II contains detailed instructions for code application and input data preparation.

  2. The high resolution powder diffractometer at ISIS - an introductory user's guide

    International Nuclear Information System (INIS)

    David, W.I.F.; Akporiaye, D.E.; Ibberson, R.M.; Wilson, C.C.

    1988-12-01

    This manual is intended to fulfil the role of an introductory users' guide for High Resolution Powder Diffractometer (HRPD). We hope, in addition to providing a general overview of the machine, that the manual will help users to run the instrument routinely and handle most aspects of data assessment and analysis. The contents are divided into six sections including: HRPD at ISIS, the experimental running of HRPD, Neutron Powder Diffraction data analysis at ISIS-practical and scientific aspects, data assessment and crystal structure plotting programs. (author)

  3. An Ontology-Based Framework for Modeling User Behavior

    DEFF Research Database (Denmark)

    Razmerita, Liana

    2011-01-01

    This paper focuses on the role of user modeling and semantically enhanced representations for personalization. This paper presents a generic Ontology-based User Modeling framework (OntobUMf), its components, and its associated user modeling processes. This framework models the behavior of the users...... and classifies its users according to their behavior. The user ontology is the backbone of OntobUMf and has been designed according to the Information Management System Learning Information Package (IMS LIP). The user ontology includes a Behavior concept that extends IMS LIP specification and defines....... The results of this research may contribute to the development of other frameworks for modeling user behavior, other semantically enhanced user modeling frameworks, or other semantically enhanced information systems....

  4. Combination of Bayesian Network and Overlay Model in User Modeling

    Directory of Open Access Journals (Sweden)

    Loc Nguyen

    2009-12-01

    Full Text Available The core of adaptive system is user model containing personal information such as knowledge, learning styles, goals… which is requisite for learning personalized process. There are many modeling approaches, for example: stereotype, overlay, plan recognition… but they don’t bring out the solid method for reasoning from user model. This paper introduces the statistical method that combines Bayesian network and overlay modeling so that it is able to infer user’s knowledge from evidences collected during user’s learning process.

  5. ModelMate - A graphical user interface for model analysis

    Science.gov (United States)

    Banta, Edward R.

    2011-01-01

    ModelMate is a graphical user interface designed to facilitate use of model-analysis programs with models. This initial version of ModelMate supports one model-analysis program, UCODE_2005, and one model software program, MODFLOW-2005. ModelMate can be used to prepare input files for UCODE_2005, run UCODE_2005, and display analysis results. A link to the GW_Chart graphing program facilitates visual interpretation of results. ModelMate includes capabilities for organizing directories used with the parallel-processing capabilities of UCODE_2005 and for maintaining files in those directories to be identical to a set of files in a master directory. ModelMate can be used on its own or in conjunction with ModelMuse, a graphical user interface for MODFLOW-2005 and PHAST.

  6. Network intrusion detector: NID user`s guide V 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Palasek, R. [ed.

    1994-04-01

    The NID suite of software tools was developed to help detect and analyze intrusive behavior over networks. NID combines and uses three techniques of intrusion detection: attack signature recognition, anomaly detection, and a vulnerability risk model. The authors have found from experience that the signature recognition component has been the most effective in detecting network based attacks. The underlying assumption of NID is that there is a security domain that you are interested in protecting. NID monitors traffic that crosses the boundary of that domain, looking for signs of intrusion and abnormal activity.

  7. Quantify uncertain emergency search techniques (QUEST) -- Theory and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, M.M.; Goldsby, M.E.; Plantenga, T.D.; Porter, T.L.; West, T.H.; Wilcox, W.B. [Sandia National Labs., Livermore, CA (United States). Systems Studies Dept.; Hensley, W.K. [Pacific Northwest National Lab., Richland, WA (United States). Nuclear Chemistry Section

    1998-01-01

    As recent world events show, criminal and terrorist access to nuclear materials is a growing national concern. The national laboratories are taking the lead in developing technologies to counter these potential threats to the national security. Sandia National laboratories, with support from Pacific Northwest National Laboratory and the Bechtel Nevada, Remote Sensing Laboratory, has developed QUEST (a model to Quantify Uncertain Emergency Search Techniques), to enhance the performance of organizations in the search for lost or stolen nuclear material. In addition, QUEST supports a wide range of other applications, such as environmental monitoring, nuclear facilities inspections, and searcher training. QUEST simulates the search for nuclear materials and calculates detector response for various source types and locations. The probability of detecting a radioactive source during a search is a function of many different variables, including source type, search location and structure geometry (including shielding), search dynamics (path and speed), and detector type and size. Through calculation of dynamic detector response, QUEST makes possible quantitative comparisons of various sensor technologies and search patterns. The QUEST model can be used as a tool to examine the impact of new detector technologies, explore alternative search concepts, and provide interactive search/inspector training.

  8. User's Guide for TOUGH2-MP - A Massively Parallel Version of the TOUGH2 Code

    Energy Technology Data Exchange (ETDEWEB)

    Earth Sciences Division; Zhang, Keni; Zhang, Keni; Wu, Yu-Shu; Pruess, Karsten

    2008-05-27

    TOUGH2-MP is a massively parallel (MP) version of the TOUGH2 code, designed for computationally efficient parallel simulation of isothermal and nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. In recent years, computational requirements have become increasingly intensive in large or highly nonlinear problems for applications in areas such as radioactive waste disposal, CO2 geological sequestration, environmental assessment and remediation, reservoir engineering, and groundwater hydrology. The primary objective of developing the parallel-simulation capability is to significantly improve the computational performance of the TOUGH2 family of codes. The particular goal for the parallel simulator is to achieve orders-of-magnitude improvement in computational time for models with ever-increasing complexity. TOUGH2-MP is designed to perform parallel simulation on multi-CPU computational platforms. An earlier version of TOUGH2-MP (V1.0) was based on the TOUGH2 Version 1.4 with EOS3, EOS9, and T2R3D modules, a software previously qualified for applications in the Yucca Mountain project, and was designed for execution on CRAY T3E and IBM SP supercomputers. The current version of TOUGH2-MP (V2.0) includes all fluid property modules of the standard version TOUGH2 V2.0. It provides computationally efficient capabilities using supercomputers, Linux clusters, or multi-core PCs, and also offers many user-friendly features. The parallel simulator inherits all process capabilities from V2.0 together with additional capabilities for handling fractured media from V1.4. This report provides a quick starting guide on how to set up and run the TOUGH2-MP program for users with a basic knowledge of running the (standard) version TOUGH2 code, The report also gives a brief technical description of the code, including a discussion of parallel methodology, code structure, as well as mathematical and numerical methods used

  9. User's Guide for TOUGH2-MP - A Massively Parallel Version of the TOUGH2 Code

    International Nuclear Information System (INIS)

    Earth Sciences Division; Zhang, Keni; Zhang, Keni; Wu, Yu-Shu; Pruess, Karsten

    2008-01-01

    TOUGH2-MP is a massively parallel (MP) version of the TOUGH2 code, designed for computationally efficient parallel simulation of isothermal and nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. In recent years, computational requirements have become increasingly intensive in large or highly nonlinear problems for applications in areas such as radioactive waste disposal, CO2 geological sequestration, environmental assessment and remediation, reservoir engineering, and groundwater hydrology. The primary objective of developing the parallel-simulation capability is to significantly improve the computational performance of the TOUGH2 family of codes. The particular goal for the parallel simulator is to achieve orders-of-magnitude improvement in computational time for models with ever-increasing complexity. TOUGH2-MP is designed to perform parallel simulation on multi-CPU computational platforms. An earlier version of TOUGH2-MP (V1.0) was based on the TOUGH2 Version 1.4 with EOS3, EOS9, and T2R3D modules, a software previously qualified for applications in the Yucca Mountain project, and was designed for execution on CRAY T3E and IBM SP supercomputers. The current version of TOUGH2-MP (V2.0) includes all fluid property modules of the standard version TOUGH2 V2.0. It provides computationally efficient capabilities using supercomputers, Linux clusters, or multi-core PCs, and also offers many user-friendly features. The parallel simulator inherits all process capabilities from V2.0 together with additional capabilities for handling fractured media from V1.4. This report provides a quick starting guide on how to set up and run the TOUGH2-MP program for users with a basic knowledge of running the (standard) version TOUGH2 code. The report also gives a brief technical description of the code, including a discussion of parallel methodology, code structure, as well as mathematical and numerical methods used

  10. National Synchrotron Light Source users manual: Guide to the VUV and x-ray beam lines

    International Nuclear Information System (INIS)

    Gmuer, N.F.; White-DePace, S.M.

    1987-08-01

    The success of the National Synchrotron Light Source in the years to come will be based, in large part, on the size of the users community and the diversity of the scientific disciplines represented by these users. In order to promote this philosophy, this National Synchrotron Light Source (NSLS) Users Manual: Guide to the VUV and X-Ray Beam Lines, has been published. This manual serves a number of purposes. In an effort to attract new research, it will present to the scientific community-at-large the current and projected architecture and capabilities of the various VUV and x-ray beam lines and storage rings. We anticipate that this publication will be updated periodically in order to keep pace with the constant changes at the NSLS

  11. Model Commissioning Plan and Guide Specifications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The objectives of Model Commissioning Plan and Guide Specifications are to ensure that the design team applies commissioning concepts to the design and prepares commissioning specifications and a commission plan for inclusion in the bid construction documents.

  12. Multiphase integral reacting flow computer code (ICOMFLO): User`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Chang, S.L.; Lottes, S.A.; Petrick, M.

    1997-11-01

    A copyrighted computational fluid dynamics computer code, ICOMFLO, has been developed for the simulation of multiphase reacting flows. The code solves conservation equations for gaseous species and droplets (or solid particles) of various sizes. General conservation laws, expressed by elliptic type partial differential equations, are used in conjunction with rate equations governing the mass, momentum, enthalpy, species, turbulent kinetic energy, and turbulent dissipation. Associated phenomenological submodels of the code include integral combustion, two parameter turbulence, particle evaporation, and interfacial submodels. A newly developed integral combustion submodel replacing an Arrhenius type differential reaction submodel has been implemented to improve numerical convergence and enhance numerical stability. A two parameter turbulence submodel is modified for both gas and solid phases. An evaporation submodel treats not only droplet evaporation but size dispersion. Interfacial submodels use correlations to model interfacial momentum and energy transfer. The ICOMFLO code solves the governing equations in three steps. First, a staggered grid system is constructed in the flow domain. The staggered grid system defines gas velocity components on the surfaces of a control volume, while the other flow properties are defined at the volume center. A blocked cell technique is used to handle complex geometry. Then, the partial differential equations are integrated over each control volume and transformed into discrete difference equations. Finally, the difference equations are solved iteratively by using a modified SIMPLER algorithm. The results of the solution include gas flow properties (pressure, temperature, density, species concentration, velocity, and turbulence parameters) and particle flow properties (number density, temperature, velocity, and void fraction). The code has been used in many engineering applications, such as coal-fired combustors, air

  13. Guide to APA-Based Models

    Science.gov (United States)

    Robins, Robert E.; Delisi, Donald P.

    2008-01-01

    In Robins and Delisi (2008), a linear decay model, a new IGE model by Sarpkaya (2006), and a series of APA-Based models were scored using data from three airports. This report is a guide to the APA-based models.

  14. Longitudinal Surveys of Australian Youth (LSAY) 2009 Cohort User Guide: Data Elements B2--Education (Post-School). Technical Paper 74B2

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2012

    2012-01-01

    This is a support document to the "Longitudinal Surveys of Australian Youth (LSAY) 2009 Cohort User Guide" report. Developed for users of LSAY, the user guide consolidates information about the LSAY 2009 cohort into one document. This support document provides post-school information for the guide. [For the main report,…

  15. Longitudinal Surveys of Australian Youth (LSAY) 2009 Cohort User Guide: Data Elements B1--Education (School and School Transition). Technical Paper 74B1

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2012

    2012-01-01

    This is a support document to the "Longitudinal Surveys of Australian Youth (LSAY) 2009 Cohort User Guide" report. Developed for users of LSAY, the user guide consolidates information about the LSAY 2009 cohort into one document. This support document provides school and school transition information for the guide. [For the main report,…

  16. User's guide to HYPOINVERSE-2000, a Fortran program to solve for earthquake locations and magnitudes

    Science.gov (United States)

    Klein, Fred W.

    2002-01-01

    Hypoinverse is a computer program that processes files of seismic station data for an earthquake (like p wave arrival times and seismogram amplitudes and durations) into earthquake locations and magnitudes. It is one of a long line of similar USGS programs including HYPOLAYR (Eaton, 1969), HYPO71 (Lee and Lahr, 1972), and HYPOELLIPSE (Lahr, 1980). If you are new to Hypoinverse, you may want to start by glancing at the section “SOME SIMPLE COMMAND SEQUENCES” to get a feel of some simpler sessions. This document is essentially an advanced user’s guide, and reading it sequentially will probably plow the reader into more detail than he/she needs. Every user must have a crust model, station list and phase data input files, and glancing at these sections is a good place to begin. The program has many options because it has grown over the years to meet the needs of one the largest seismic networks in the world, but small networks with just a few stations do use the program and can ignore most of the options and commands. History and availability. Hypoinverse was originally written for the Eclipse minicomputer in 1978 (Klein, 1978). A revised version for VAX and Pro-350 computers (Klein, 1985) was later expanded to include multiple crustal models and other capabilities (Klein, 1989). This current report documents the expanded Y2000 version and it supercedes the earlier documents. It serves as a detailed user's guide to the current version running on unix and VAX-alpha computers, and to the version supplied with the Earthworm earthquake digitizing system. Fortran-77 source code (Sun and VAX compatible) and copies of this documentation is available via anonymous ftp from computers in Menlo Park. At present, the computer is swave.wr.usgs.gov and the directory is /ftp/pub/outgoing/klein/hyp2000. If you are running Hypoinverse on one of the Menlo Park EHZ or NCSN unix computers, the executable currently is ~klein/hyp2000/hyp2000. New features. The Y2000 version of

  17. A qualitative case study of LifeGuide: users' experiences of software for developing Internet-based behaviour change interventions.

    Science.gov (United States)

    Williams, Sarah; Yardley, Lucy; Wills, Gary B

    2013-03-01

    Previously, behavioural scientists seeking to create Internet-based behaviour change interventions have had to rely on computer scientists to actually develop and modify web interventions. The LifeGuide software was designed to enable behavioural researchers to develop and adapt Internet-based behavioural interventions themselves. This article reports a qualitative case study of users' experiences and perceptions of the LifeGuide software. The aim was to explore users' experiences and their perceptions of the benefits and limitations of this approach to intervention development. Twenty LifeGuide users took part in semi-structured interviews and one provided feedback via email. Thematic analysis identified three overarching themes: 'Recognising LifeGuide's potential', 'I'm not a programmer' and 'Knowledge sharing - the future of LifeGuide'. Users valued LifeGuide's potential to allow them to flexibly develop and modify interventions at little cost. However, users noted that their lack of programming experience meant that they needed to learn new skills for using the software, and they varied in the extent to which they felt able to develop interventions without any input from programmers. Respondents saw the potential of using the LifeGuide Community Website to share technical support and examples of intervention components to support their use of LifeGuide.

  18. NASIS data base management system - IBM 360/370 OS MVT implementation. 7: Data base administrator user's guide

    Science.gov (United States)

    1973-01-01

    The Data Base Administrator User's Guide for the NASA Aerospace Safety information system is presented. The subjects discussed are: (1) multi-terminal tasking, (2) data base executive, (3) utilities, (4) maintenance, and (5) update mode functions.

  19. Visual Sample Plan Version 7.0 User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Matzke, Brett D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Newburn, Lisa LN [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hathaway, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bramer, Lisa M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wilson, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dowson, Scott T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sego, Landon H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pulsipher, Brent A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-03-01

    User's guide for VSP 7.0 This user's guide describes Visual Sample Plan (VSP) Version 7.0 and provides instructions for using the software. VSP selects the appropriate number and location of environmental samples to ensure that the results of statistical tests performed to provide input to risk decisions have the required confidence and performance. VSP Version 7.0 provides sample-size equations or algorithms needed by specific statistical tests appropriate for specific environmental sampling objectives. It also provides data quality assessment and statistical analysis functions to support evaluation of the data and determine whether the data support decisions regarding sites suspected of contamination. The easy-to-use program is highly visual and graphic. VSP runs on personal computers with Microsoft Windows operating systems (XP, Vista, Windows 7, and Windows 8). Designed primarily for project managers and users without expertise in statistics, VSP is applicable to two- and three-dimensional populations to be sampled (e.g., rooms and buildings, surface soil, a defined layer of subsurface soil, water bodies, and other similar applications) for studies of environmental quality. VSP is also applicable for designing sampling plans for assessing chem/rad/bio threat and hazard identification within rooms and buildings, and for designing geophysical surveys for unexploded ordnance (UXO) identification.

  20. The USEtox story: A survey of model developer visions and user requirements

    DEFF Research Database (Denmark)

    Westh, Torbjørn Bochsen; Hauschild, Michael Zwicky; Birkved, Morten

    2015-01-01

    into LCA software and methods, (4) improve update/testing procedures, (5) strengthen communication between developers and users, and (6) extend model scope. By generalizing our recommendations to guide scientific model development in a broader context, we emphasize to acknowledge different levels of user......, we analyzed user expectations and experiences and compared them with the developers’ visions. Methods We applied qualitative and quantitative data collection methods including an online questionnaire, semistructured user and developer interviews, and review of scientific literature. Questionnaire...... and interview results were analyzed in an actor-network perspective in order to understand user needs and to compare these with the developers’ visions. Requirement engineering methods, more specifically function tree, system context, and activity diagrams, were iteratively applied and structured to develop...

  1. A condensed review of the intelligent user modeling of information retrieval system

    International Nuclear Information System (INIS)

    Choi, Kwang

    2001-10-01

    This study discussed theoretical aspects of user modeling, modeling cases of commecial systems and elements that need consideration when constructing user models. The results of this study are 1) Comprehensive and previous analysis of system users is required to bulid user model. 2) User information is collected from users directly and inference. 3) Frame structure is compatible to build user model. 4) Prototype user model is essential to bulid a user model and based on previous user analysis. 5) User model builder has interactive information collection, inference, flexibility, model updating functions. 6) User model builder has to reflect user's feedback

  2. LISA package user guide. Part I: PREP (Statistical PRE Processor) preparation of input sample for Monte Carlo simulations. Program description and user guide

    International Nuclear Information System (INIS)

    Saltelli, A.; Homma, T.

    1992-01-01

    This manual is subdivided into three parts. In the first part, the PREP utility (Statistical Pre Processor) assists in the preparation of a Monte Carlo Analysis of the behaviour of a model encoded into a computer program. The ultimate goal of this type of analysis is to determine the model response to variation in its input parameters, to assess the uncertainties in the model prediction and to correlate these uncertainties with the most influential model parameters. The part of the analysis dealt with by PREP is the preparation of the input stochastic sample for the analysis given the distribution of the input parameters. PREP tries to ease the transformation of the user model from deterministic (one execution corresponding to one set of values for the input parameters) to stochastic (many executions to cover assigned value distributions for the input parameters). PREP is described with reference to two alternative applications: within the LISA package (for the analysis of the risk of a nuclear waste disposal) and with a user supplied model. 8 refs., 1 fig., 15 tabs

  3. SCDAP/RELAP5/MOD 3.1 code manual: User`s guide and input manual. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    Coryell, E.W.; Johnsen, E.C. [eds.; Allison, C.M. [and others

    1995-06-01

    The SCDAP/RELAP5 code has been developed for best estimate transient simulation of light water reactor coolant systems during a severe accident. The code models the coupled behavior of the reactor coolant system, core, fission product released during a severe accident transient as well as large and small break loss of coolant accidents, operational transients such as anticipated transient without SCRAM, loss of offsite power, loss of feedwater, and loss of flow. A generic modeling approach is used that permits as much of a particular system to be modeled as necessary. Control system and secondary system components are included to permit modeling of plant controls, turbines, condensers, and secondary feedwater conditioning systems. This volume provides guidelines to code users based upon lessons learned during the developmental assessment process. A description of problem control and the installation process is included. Appendix a contains the description of the input requirements.

  4. An Integrated User Interface Style Guide for the ESF-CCS, RPS and CPCS display design

    International Nuclear Information System (INIS)

    Park, Jae Kyu; Lee, Hyun Chul; Hwang, Seong Hwan; Jang, Tong Il; Kang, Suk Ho; Lee, Jung Woon; Lee, Yong Hee

    2009-01-01

    The human machine interface (HMI) design process is important to enhance the safety and reliability of a Nuclear Power Plant (NPP) operation. Various MMI activities are achieved with progress of MMI and environment of NPP. These activities are impossible to utilize when upgrade of environment because most of these activities emphasize hardware aspect. Also, the human factors guidelines mostly describe the human factors principles so the designer has to adapt them to apply them to his design. The design-specific guideline that is specially dedicated to a unique system and derived from the general guidelines is called style guide. The style guide provides easy to use templates to help the user interface design, and these templates help ensure a consistent look and behavior throughout the design products. However, it could be difficult for a designer to select the human factors guideline items related to a target system and to derive a style guide from the items. This paper describes human factors activities carried out to develop a style guide for the ESF-CCS, RPS and CPCS system

  5. USER'S GUIDE TO THE PERSONAL COMPUTER VERSION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (PC-BEIS2)

    Science.gov (United States)

    The document is a user's guide for an updated Personal Computer version of the Biogenic Emissions Inventory System (PC-BEIS2), allowing users to estimate hourly emissions of biogenic volatile organic compounds (BVOCs) and soil nitrogen oxide emissions for any county in the contig...

  6. Nuclear computerized library for assessing reactor reliability (NUCLARR): User's guide: Part 3, NUCLARR system description

    International Nuclear Information System (INIS)

    Gilmore, W.E.; Gentillon, C.D.; Gertman, D.I.; Beers, G.H.; Galyean, W.J.; Gilbert, B.G.

    1988-06-01

    The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. NUCLARR can be used by the end user to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume IV of this series is the User's Guide for operating the NUCLARR software and is presented in three parts. This document, Part 3: NUCLARR System Description, provides an in-depth discussion of the design characteristics and special features of the NUCLARR software. Part 3 also presents the organization of the data base structures and techniques used to manipulate the data

  7. User's guide of DETRAS system-2. Setup of DETRAS system and its startup

    International Nuclear Information System (INIS)

    Yamaguchi, Yukichi

    2007-01-01

    DETRAS system is a PWR reactor simulator system for operation training whose distinguished feature is that it can be operated from the remote place of the simulator site. The document which is the second one of a series of three volumes of the user's guide of DETRAS describes a startup procedure of the DETRAS system over the simulator area, the local network involving the simulator and then gives explanation about the procedure of remote access for startup and shutdown of the simulator outside of the simulator area. (author)

  8. User's Guide Virtual Hydropower Prospector Version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Douglas G. Hall; Sera E. White; Julie A. Brizzee; Randy D. Lee

    2005-11-01

    The Virtual Hydropower Prospector is a web-based geographic information system (GIS) application for displaying U.S. water energy resource sites on hydrologic region maps. The application assists the user in locating sites of interest and performing preliminary, development feasibility assessments. These assessments are facilitated by displaying contextual features in addition to the water energy resource sites such as hydrograpy, roads, power infrastructure, populated places, and land use and control. This guide provides instructions for operating the application to select what features are displayed and the extent of the map view. It also provides tools for selecting features of particular interest and displaying their attribute information.

  9. User's Guide to the Energy Charting and Metrics Tool (ECAM)

    Energy Technology Data Exchange (ETDEWEB)

    Taasevigen, Danny J.; Koran, William

    2012-02-28

    The intent of this user guide is to provide a brief description of the functionality of the Energy Charting and Metrics (ECAM) tool, including the expanded building re-tuning functionality developed for Pacific Northwest National laboratory (PNNL). This document describes the tool's general functions and features, and offers detailed instructions for PNNL building re-tuning charts, a feature in ECAM intended to help building owners and operators look at trend data (recommended 15-minute time intervals) in a series of charts (both time series and scatter) to analyze air-handler, zone, and central plant information gathered from a building automation system (BAS).

  10. xLPR Sim Editor 1.0 User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Mariner, Paul

    2017-03-01

    The United States Nuclear Regulatory Commission in cooperation with the Electric Power Research Institute contracted Sandia National Laboratories to develop the framework of a probabilistic fracture mechanics assessment code called xLPR ( Extremely Low Probability of Rupture) Version 2.0 . The purpose of xLPR is to evaluate degradation mechanisms in piping systems at nuclear power plants and to predict the probability of rupture. This report is a user's guide for xLPR Sim Editor 1.0 , a graphical user interface for creating and editing the xLPR Version 2.0 input file and for creating, editing, and using the xLPR Version 2.0 database files . The xLPR Sim Editor, provides a user - friendly way for users to change simulation options and input values, s elect input datasets from xLPR data bases, identify inputs needed for a simulation, and create and modify an input file for xLPR.

  11. A user experience model for tangible interfaces for children

    NARCIS (Netherlands)

    Reidsma, Dennis; van Dijk, Elisabeth M.A.G.; van der Sluis, Frans; Volpe, G; Camurri, A.; Perloy, L.M.; Nijholt, Antinus

    2015-01-01

    Tangible user interfaces allow children to take advantage of their experience in the real world when interacting with digital information. In this paper we describe a model for tangible user interfaces specifically for children that focuses mainly on the user experience during interaction and on how

  12. Towards a new Role of Agent Technology in User Modelling

    OpenAIRE

    Lorenz, A.

    2003-01-01

    This paper discusses resent attempts to employ multi-agent technologies for user modelling purposes. Based on the analysis of recent implemented systems, this contribution provides a general agent definition representing a flexible implementation to employ highly specialized entities for user modelling tasks, and illustrates communication and cooperation approaches. In the overall solution, agent teams cooperate to fulfill the requirements of user modelling in a more appropriate way.

  13. A Grammar-based Approach for Modeling User Interactions and Generating Suggestions During the Data Exploration Process.

    Science.gov (United States)

    Dabek, Filip; Caban, Jesus J

    2017-01-01

    Despite the recent popularity of visual analytics focusing on big data, little is known about how to support users that use visualization techniques to explore multi-dimensional datasets and accomplish specific tasks. Our lack of models that can assist end-users during the data exploration process has made it challenging to learn from the user's interactive and analytical process. The ability to model how a user interacts with a specific visualization technique and what difficulties they face are paramount in supporting individuals with discovering new patterns within their complex datasets. This paper introduces the notion of visualization systems understanding and modeling user interactions with the intent of guiding a user through a task thereby enhancing visual data exploration. The challenges faced and the necessary future steps to take are discussed; and to provide a working example, a grammar-based model is presented that can learn from user interactions, determine the common patterns among a number of subjects using a K-Reversible algorithm, build a set of rules, and apply those rules in the form of suggestions to new users with the goal of guiding them along their visual analytic process. A formal evaluation study with 300 subjects was performed showing that our grammar-based model is effective at capturing the interactive process followed by users and that further research in this area has the potential to positively impact how users interact with a visualization system.

  14. User-oriented and cognitive models of information retrieval

    DEFF Research Database (Denmark)

    Järvelin, Kalervo; Ingwersen, Peter

    2010-01-01

    The domain of user-oriented and cognitive IR is first discussed, followed by a discussion on the dimensions and types of models one may build for the domain.  The focus of the present entry is on the models of user-oriented and cognitive IR, not on their empirical applications. Several models wit...

  15. User's guide to SERICPAC: A computer program for calculating electric-utility avoided costs rates

    Energy Technology Data Exchange (ETDEWEB)

    Wirtshafter, R.; Abrash, M.; Koved, M.; Feldman, S.

    1982-05-01

    SERICPAC is a computer program developed to calculate average avoided cost rates for decentralized power producers and cogenerators that sell electricity to electric utilities. SERICPAC works in tandem with SERICOST, a program to calculate avoided costs, and determines the appropriate rates for buying and selling of electricity from electric utilities to qualifying facilities (QF) as stipulated under Section 210 of PURA. SERICPAC contains simulation models for eight technologies including wind, hydro, biogas, and cogeneration. The simulations are converted in a diversified utility production which can be either gross production or net production, which accounts for an internal electricity usage by the QF. The program allows for adjustments to the production to be made for scheduled and forced outages. The final output of the model is a technology-specific average annual rate. The report contains a description of the technologies and the simulations as well as complete user's guide to SERICPAC.

  16. LDA-Based Unified Topic Modeling for Similar TV User Grouping and TV Program Recommendation.

    Science.gov (United States)

    Pyo, Shinjee; Kim, Eunhui; Kim, Munchurl

    2015-08-01

    Social TV is a social media service via TV and social networks through which TV users exchange their experiences about TV programs that they are viewing. For social TV service, two technical aspects are envisioned: grouping of similar TV users to create social TV communities and recommending TV programs based on group and personal interests for personalizing TV. In this paper, we propose a unified topic model based on grouping of similar TV users and recommending TV programs as a social TV service. The proposed unified topic model employs two latent Dirichlet allocation (LDA) models. One is a topic model of TV users, and the other is a topic model of the description words for viewed TV programs. The two LDA models are then integrated via a topic proportion parameter for TV programs, which enforces the grouping of similar TV users and associated description words for watched TV programs at the same time in a unified topic modeling framework. The unified model identifies the semantic relation between TV user groups and TV program description word groups so that more meaningful TV program recommendations can be made. The unified topic model also overcomes an item ramp-up problem such that new TV programs can be reliably recommended to TV users. Furthermore, from the topic model of TV users, TV users with similar tastes can be grouped as topics, which can then be recommended as social TV communities. To verify our proposed method of unified topic-modeling-based TV user grouping and TV program recommendation for social TV services, in our experiments, we used real TV viewing history data and electronic program guide data from a seven-month period collected by a TV poll agency. The experimental results show that the proposed unified topic model yields an average 81.4% precision for 50 topics in TV program recommendation and its performance is an average of 6.5% higher than that of the topic model of TV users only. For TV user prediction with new TV programs, the average

  17. Modeling and clustering users with evolving profiles in usage streams

    KAUST Repository

    Zhang, Chongsheng

    2012-09-01

    Today, there is an increasing need of data stream mining technology to discover important patterns on the fly. Existing data stream models and algorithms commonly assume that users\\' records or profiles in data streams will not be updated or revised once they arrive. Nevertheless, in various applications such asWeb usage, the records/profiles of the users can evolve along time. This kind of streaming data evolves in two forms, the streaming of tuples or transactions as in the case of traditional data streams, and more importantly, the evolving of user records/profiles inside the streams. Such data streams bring difficulties on modeling and clustering for exploring users\\' behaviors. In this paper, we propose three models to summarize this kind of data streams, which are the batch model, the Evolving Objects (EO) model and the Dynamic Data Stream (DDS) model. Through creating, updating and deleting user profiles, these models summarize the behaviors of each user as a profile object. Based upon these models, clustering algorithms are employed to discover interesting user groups from the profile objects. We have evaluated all the proposed models on a large real-world data set, showing that the DDS model summarizes the data streams with evolving tuples more efficiently and effectively, and provides better basis for clustering users than the other two models. © 2012 IEEE.

  18. Spud and FLML: generalising and automating the user interfaces of scientific computer models

    Science.gov (United States)

    Ham, D. A.; Farrell, P. E.; Maddison, J. R.; Gorman, G. J.; Wilson, C. R.; Kramer, S. C.; Shipton, J.; Collins, G. S.; Cotter, C. J.; Piggott, M. D.

    2009-04-01

    The interfaces by which users specify the scenarios to be simulated by scientific computer models are frequently primitive, under-documented and ad-hoc text files which make using the model in question difficult and error-prone and significantly increase the development cost of the model. We present a model-independent system, Spud[1], which formalises the specification of model input formats in terms of formal grammars. This is combined with an automatically generated graphical user interface which guides users to create valid model inputs based on the grammar provided, and a generic options reading module which minimises the development cost of adding model options. We further present FLML, the Fluidity Markup Language. FLML applies Spud to the Imperial College Ocean Model (ICOM) resulting in a graphically driven system which radically improves the usability of ICOM. As well as a step forward for ICOM, FLML illustrates how the Spud system can be applied to an existing complex ocean model highlighting the potential of Spud as a user interface for other codes in the ocean modelling community. [1] Ham, D. A. et.al, Spud 1.0: generalising and automating the user interfaces of scientific computer models, Geosci. Model Dev. Discuss., 1, 125-146, 2008.

  19. User guide for the farm process (FMP1) for the U.S. Geological Survey's modular three-dimensional finite-difference ground-water flow model, MODFLOW-2000

    Science.gov (United States)

    Schmid, Wolfgang; Hanson, R.T.; Maddock, Thomas; Leake, S.A.

    2006-01-01

    There is a need to estimate dynamically integrated supply-and-demand components of irrigated agriculture as part of the simulation of surface-water and ground-water flow. To meet this need, a computer program called the Farm Process (FMP1) was developed for the U.S. Geological Survey three-dimensional finite-difference modular ground-water flow model, MODFLOW- 2000 (MF2K). The FMP1 allows MF2K users to simulate conjunctive use of surface- and ground water for irrigated agriculture for historical and future simulations, water-rights issues and operational decisions, nondrought and drought scenarios. By dynamically integrating farm delivery requirement, surface- and ground-water delivery, as well as irrigation-return flow, the FMP1 allows for the estimation of supplemental well pumpage. While farm delivery requirement and irrigation return flow are simulated by the FMP1, the surface-water delivery to the farm can be simulated optionally by coupling the FMP1 with the Streamflow Routing Package (SFR1) and the farm well pumping can be simulated optionally by coupling the FMP1 to the Multi-Node Well (MNW) Package. In addition, semi-routed deliveries can be specified that are associated with points of diversion in the SFR1 stream network. Nonrouted surface-water deliveries can be specified independently of any stream network. The FMP1 maintains a dual mass balance of a farm budget and as part of the ground-water budget. Irrigation demand, supply, and return flow are in part subject to head-dependent sources and sinks such as evapotranspiration from ground water and leakage between the conveyance system and the aquifer. Farm well discharge and farm net recharge are source/sink terms in the FMP1, which depend on transpiration uptake from ground water and other head dependent consumptive use components. For heads rising above the bottom of the root zone, the actual transpiration is taken to vary proportionally with the depth of the active root zone, which can be restricted

  20. Integrated Baseline Bystem (IBS) Version 1.03: Models guide

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-01

    The Integrated Baseline System)(IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planning and analysis. This document is the models guide for the IBS and explains how to use the emergency related computer models. This document provides information for the experienced system user, and is the primary reference for the computer modeling software supplied with the system. It is designed for emergency managers and planners, and others familiar with the concepts of computer modeling. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other IBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary.

  1. Guide for prepare the plan for radiological emergency by the users of ionizing radiation sources

    International Nuclear Information System (INIS)

    1992-01-01

    The Radiological Emergency Plan foresees all the possible radiological accidents with the ionizing sources the entity is using. The measures should be adopted by every factor is supped to take part in the emergencies created. The effectiveness of the guaranteed. THis guide establishes the model for elaborating the radiological Emergency Plans

  2. Scout and Guides, Key Users of Astronomy & Planetary Sciences Outreach that Support Education

    Science.gov (United States)

    Brumfitt, A.; Thompson, L.

    Few people outside of the Scouting and Guide movement would appreciate that these world wide organisations have an active youth membership of over 40 million children and young adults. These two organisations rely on external specialist expert knowledge for the effective delivery of their education and award schemes. The high membership and established program delivery pathways make these organisations excellent vehicles for outreach programs. In particular Scouts and Guides are able to introduce astronomy and planetary sciences into their informal education programs at a timing that best suits the child and not one constrained by the schedule of formal education. It is the global voluntary nature of membership of these organisations that make them extremely effective learning vehicles. The members both youth and leader are highly motivated. These two organisations have a structured education program for youth members based on both individual pursuits or targets and group projects. The organisations has as part of their infra structure benchmarks for the measure of excellence in achievement and education at all levels. Scouts and Guides are a way of encompassing knowledge and lighting candles for life long learning. Scouts and guides address all year groups of formal education from primary through to tertiary levels, from cubs and brownies through various levels to Rovers and Rangers. Space is seen as relevant to Scouting and Guides, the Guide movement UK has recently adopted a "Go for it" challenge award for youth members to investigate space science. Similar awards exist in the Scouting movement in Europe, USA and Australia. The ready adoption of Space science fits well with scouting principles as Space is perceived as the "New Frontier of Discovery". In October 2007, Scouts and Guides from Europe will gather at Tidbinbilla deep space Tracking Station, Australia for the first Scout and Guide International Space Camp. The model used for this camp was based on a

  3. 75 FR 54627 - ICLUS v1.3 User's Manual: ArcGIS Tools and Datasets for Modeling U.S. Housing Density Growth

    Science.gov (United States)

    2010-09-08

    ... AGENCY ICLUS v1.3 User's Manual: ArcGIS Tools and Datasets for Modeling U.S. Housing Density Growth... (GIS) tool and final user's guide titled, ``ICLUS v1.3 User's Manual: ArcGIS Tools and Datasets for.... ADDRESSES: ``ICLUS v1.3 User's Manual: ArcGIS Tools and Datasets for Modeling U.S. Housing Density Growth...

  4. User-Oriented and Cognitive Models of Information Retrieval

    DEFF Research Database (Denmark)

    Ingwersen, Peter; Järvelin, Kalervo; Skov, Mette

    2017-01-01

    The domain of user-oriented and cognitive information retrieval (IR) is first discussed, followed by a discussion on the dimensions and types of models one may build for the domain. The focus of the present entry is on the models of user-oriented and cognitive IR, not on their empirical...

  5. Nuclear Detection Figure Of Merit (NDFOM) Version 1.2 User's Guide

    International Nuclear Information System (INIS)

    Stroud, Phillip D.; Dufresne, Thomas A.

    2012-01-01

    NDFOM is a detector database and detector evaluation system, accessible as a web service. It runs on the same server as the Patriot service, but uses port 8081. In this user's guide, we will use the example case that the patriot service is running on http://patriot.lanl.gov. Then the NDFOM service would be accessible at the URL http://patriot.lanl.gov:8081/ndfom. In addition to local server installations, common server locations are 1) a patriot server running on a virtual machine (use the virtual machine URL with :8081/ndfom), and 2) a patriot server running on a local machine (use http://localhost:8081/ndfom or http://127.0.0.1:8081/ndfom). The home screen provides panels to select detectors, a scenario, and a figure-of-merit. It also has an 'analyze' button, which will evaluate the selected figure-of-merit for the selected detectors, for the scenario selected by the user. The detector effectiveness evaluations are presented through the browser in a ranked list of detectors. The user does not need to log in to perform analysis with pre-supplied detectors, scenarios, and FOMs. The homepage view is shown in Figure 1. The first panel displays a list of the detectors in the current detector database. The user can select one, some, or all detectors to evaluate. On the right of each listed detector, there is a star icon. Clicking that icon will open a panel that displays the details about that detector, such as detector material, dimensions, thresholds, etc. The center panel displays the pre-supplied scenarios that are in the database. A scenario specifies the source of interest, the spectrum of the radiation, the background radiation spectrum, the distance or distance of closest approach, the allowable false positive rate, and the dwell time or speed. Scenario details can be obtained by clicking the star to the right of a scenario. A scenario can be selected by clicking it.

  6. Modeling characteristics of location from user photos

    NARCIS (Netherlands)

    V. Kumar (Vikas); S. Bakhshi (Saeideh); L. Kennedy (Lyndon); D.A. Shamma (David)

    2017-01-01

    textabstractIn the past decade, location-based services have grown through geo-tagging and place-tagging. Proliferation of GPS-enabled mobile devices further enabled exponential growth in geotagged user content. On the other hand, location-based applications harness the abundance of geo-tagged

  7. Modeling User Behavior and Attention in Search

    Science.gov (United States)

    Huang, Jeff

    2013-01-01

    In Web search, query and click log data are easy to collect but they fail to capture user behaviors that do not lead to clicks. As search engines reach the limits inherent in click data and are hungry for more data in a competitive environment, mining cursor movements, hovering, and scrolling becomes important. This dissertation investigates how…

  8. User Instructions for the Policy Analysis Modeling System (PAMS)

    Energy Technology Data Exchange (ETDEWEB)

    McNeil, Michael A.; Letschert, Virginie E.; Van Buskirk, Robert D.

    2018-03-13

    PAMS uses country-specific and product-specific data to calculate estimates of impacts of a Minimum Efficiency Performance Standard (MEPS) program. The analysis tool is self-contained in a Microsoft Excel spreadsheet, and requires no links to external data, or special code additions to run. The analysis can be customized to a particular program without additional user input, through the use of the pull-down menus located on the Summary page. In addition, the spreadsheet contains many areas into which user-generated input data can be entered for increased accuracy of projection. The following is a step-by-step guide for using and customizing the tool.

  9. User's Guide to the Weighted-Multiple-Linear Regression Program (WREG version 1.0)

    Science.gov (United States)

    Eng, Ken; Chen, Yin-Yu; Kiang, Julie.E.

    2009-01-01

    Streamflow is not measured at every location in a stream network. Yet hydrologists, State and local agencies, and the general public still seek to know streamflow characteristics, such as mean annual flow or flood flows with different exceedance probabilities, at ungaged basins. The goals of this guide are to introduce and familiarize the user with the weighted multiple-linear regression (WREG) program, and to also provide the theoretical background for program features. The program is intended to be used to develop a regional estimation equation for streamflow characteristics that can be applied at an ungaged basin, or to improve the corresponding estimate at continuous-record streamflow gages with short records. The regional estimation equation results from a multiple-linear regression that relates the observable basin characteristics, such as drainage area, to streamflow characteristics.

  10. L2TTMON Monitoring Program for L2 Topological Trigger in H1 Experiment - User's Guide

    International Nuclear Information System (INIS)

    Banas, E.; Ducorps, A.

    1999-01-01

    Monitoring software for the L2 Topological Trigger in H1 experiment consists of two parts working on two different computers. The hardware read-out and data processing is done on a fast FIC 8234 computer working with the OS9 real time operating system. The Macintosh Quadra is used as a Graphic User Interface for accessing the OS9 trigger monitoring software. The communication between both computers is based on the parallel connection between the Macintosh and the VME crate, where the FIC computer is placed. The special designed protocol (client-server) is used to communicate between both nodes. The general scheme of monitoring for the L2 Topological Trigger and detailed description of using of the monitoring software in both nodes are given in this guide. (author)

  11. Users guide for NRC145-2 accident assessment computer code

    International Nuclear Information System (INIS)

    Pendergast, M.M.

    1982-08-01

    An accident assessment computer code has been developed for use at the Savannah River Plant. This computer code is based upon NRC Regulatory Guide 1.145 which provides guidence for accident assessements for power reactors. The code contains many options so that the user may utilize the code for many different assessments. For example the code can be used for non-nuclear assessments such as Sulpher Dioxide which may be required by the EPA. A discription of the code is contained in DP-1646. This document is a compilation of step-by-step instructions on how to use the code on the SRP IBM 3308 computer. This document consists of a number of tables which contain copies of computer listings. Some of the computer listings are copies of input; other listings give examples of computer output

  12. Computer System for Monitoring Environmental Campaigns. User's Guide. Version 1.0

    International Nuclear Information System (INIS)

    Bailador, M.A.; Barcala, M.; Blanco, F.; Gonzalez, C.; Perez, J. M.; Sanchez, A.; Sanchez, E.; Willmot, C.

    2012-01-01

    CIEMAT has an environmental mobile unit to carry out the execution of environmental measures at diverse environments. During the last years, this unit has been involved in changes relative to its instrumentation, being necessary to developed an informatics system, SiSCA Informatics System for the monitoring of environmental campaigns, that is able to: Acquiring in a synchronized way the data from the environmental mobile unit instruments. Showing in a georrefential way these data by means of GIS technology. Transmitting in a secure way and in real time the data to a centralized data base repository This document is the user guide that picks up all the necessary information to use SiSCA when UMA environmental campaigns are carrying out. (Author)

  13. A New User Segmentation Model for E-Government

    OpenAIRE

    Ran Tang; Zhenji Zhang; Xiaolan Guan; Lida Wang

    2013-01-01

    E-government in China has entered the development stage of personalized services, and user segmentation has become an urgent demand. On the basis of systematic interpretation of e-government development stages, in this article, the authors introduce CRM and customer segmentation concept into e-government areas, construct e-government user segmentation model, and obtain user segmentation results by empirical analysis. Comparing with existing segmentation methods based on experience, because of...

  14. Model driven development of user interface prototypes

    DEFF Research Database (Denmark)

    Störrle, Harald

    2010-01-01

    the whole UI development life cycle, connect all stakeholders involved, and support a wide range of levels of granularity and abstraction. This is achieved by using Window/Event-Diagrams (WEDs), a UI specification notation based on UML 2 state machines. It affords closer collaboration between different user......Many approaches to interface development apply only to isolated aspects of the development of user interfaces (UIs), e.g., exploration during the early phases, design of visual appearance, or implementation in some technology. In this paper we explore an _integrated_ approach to incorporate...... groups like graphic designers and software developers by integrating traditional pen-and-paper based methods with contemporary MDA-based CASE tools. We have implemented our approach in the Advanced Interaction Design Environemnt (AIDE), an application to support WEDs....

  15. End Users and ERP Systems� Success. Three Models

    Directory of Open Access Journals (Sweden)

    Gianina MIHAI

    2017-06-01

    Full Text Available Information systems (IS have an enormous impact on organizations, individual work, and performance in general. As a result, many research works in the field of IS are focused on the interrelationship between individual performance and IS performance. During the last 20 to 30 years many models have been developed and tested by researchers. Their main objective was to investigate IS success and user performance in different environments. Therefore, a number of models appeared, their goal being the studying of the success, usefulness, end user adoption and utilization of IS, and other user and IS-related aspects in different organizations. This research paper presents three of the most important models developed in specialized literature, which deal with measuring IS success and end user adoption of the IS: the TAM model, the D&M model, and the TTF model. The research also provides an overview of some studies that have applied these models in the field of ERP systems.

  16. Artificial intelligence techniques for modeling database user behavior

    Science.gov (United States)

    Tanner, Steve; Graves, Sara J.

    1990-01-01

    The design and development of the adaptive modeling system is described. This system models how a user accesses a relational database management system in order to improve its performance by discovering use access patterns. In the current system, these patterns are used to improve the user interface and may be used to speed data retrieval, support query optimization and support a more flexible data representation. The system models both syntactic and semantic information about the user's access and employs both procedural and rule-based logic to manipulate the model.

  17. Characterizing mobility from the prosthetic limb user's perspective: Use of focus groups to guide development of the Prosthetic Limb Users Survey of Mobility.

    Science.gov (United States)

    Hafner, Brian J; Morgan, Sara J; Abrahamson, Daniel C; Amtmann, Dagmar

    2016-10-01

    Input from target respondents in the development of patient-reported outcome measures is necessary to ensure that the instrument is meaningful. To solicit perspectives of prosthetic limb users about their mobility experiences and to inform development of the Prosthetic Limb Users Survey of Mobility. Qualitative study. Four focus groups of lower limb prosthesis users were held in different regions of the United States. Focus group transcripts were coded, and themes were identified. Feedback from participants was used to develop a framework for measuring mobility with a lower limb prosthesis. Focus group participants (N = 37) described mobility as a confluence of factors that included characteristics of the individual, activity, and environment. Identified themes were defined as individual characteristics, forms of movement, and environmental situations. Prosthetic mobility was conceptualized as movement activities performed in an environmental or situational context. Respondent feedback used to guide development of Prosthetic Limb Users Survey of Mobility established a foundation for a new person-centered measure of mobility with a prosthetic limb. Perspectives of target respondents are needed to guide development of instruments intended to measure health outcomes. Focus groups of prosthetic limb users were conducted to solicit experiences related to mobility with a lower limb prosthesis. Results were used to inform development of a clinically meaningful, person-centered instrument. © The International Society for Prosthetics and Orthotics 2015.

  18. Emphasis/Nevada STDEM : user's guide : version 1.0.

    Energy Technology Data Exchange (ETDEWEB)

    Seidel, David Bruce; Coats, Rebecca Sue; Pasik, Michael Francis

    2005-04-01

    STDEM is the structured mesh time-domain electromagnetic and plasma physics component of Emphasis/Nevada. This report provides a guide on using STDEM. Emphasis, the electromagnetic physics analysis system, is a suite of codes for the simulation of electromagnetic and plasma physics phenomena. The time-dependent components of Emphasis have been implemented using the Nevada framework [1]. The notation Emphasis/Nevada is used to highlight this relationship and/or distinguish the time-dependent components of Emphasis. In theory the underlying framework should have little influence on the user's interaction with the application. In practice the framework tends to be more invasive as it provides key services such as input parsing and defines fundamental concepts and terminology. While the framework offers many technological advancements from a software development point of view, from a user's perspective the key benefits of the underlying framework are the common interface for all framework physics modules as well as the ability to perform coupled physics simulations. STDEM is the structured time-domain electromagnetic and plasma physics component of Emphasis/Nevada. STDEM provides for the full-wave solution to Maxwell's equations on multi-block three-dimensional structured grids using finite-difference time-domain (FDTD) algorithms. Additionally STDEM provides for the fully relativistic, self-consistent simulation of charged particles using particle-in-cell (PIC) algorithms.

  19. GRAFLAB 2.3 for UNIX - A MATLAB database, plotting, and analysis tool: User`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, W.N.

    1998-03-01

    This report is a user`s manual for GRAFLAB, which is a new database, analysis, and plotting package that has been written entirely in the MATLAB programming language. GRAFLAB is currently used for data reduction, analysis, and archival. GRAFLAB was written to replace GRAFAID, which is a FORTRAN database, analysis, and plotting package that runs on VAX/VMS.

  20. VMTL: a language for end-user model transformation

    DEFF Research Database (Denmark)

    Acretoaie, Vlad; Störrle, Harald; Strüber, Daniel

    2016-01-01

    Model transformation is a key enabling technology of Model-Driven Engineering (MDE). Existing model transformation languages are shaped by and for MDE practitioners—a user group with needs and capabilities which are not necessarily characteristic of modelers in general. Consequently, these langua......Model transformation is a key enabling technology of Model-Driven Engineering (MDE). Existing model transformation languages are shaped by and for MDE practitioners—a user group with needs and capabilities which are not necessarily characteristic of modelers in general. Consequently......, these languages are largely ill-equipped for adoption by end-user modelers in areas such as requirements engineering, business process management, or enterprise architecture. We aim to introduce a model transformation language addressing the skills and requirements of end-user modelers. With this contribution, we...... hope to broaden the application scope of model transformation and MDE technology in general. We discuss the profile of end-user modelers and propose a set of design guidelines for model transformation languages addressing them. We then introduce Visual Model Transformation Language (VMTL) following...

  1. WASTES II: Waste System Transportation and Economic Simulation. Version II. User's guide

    International Nuclear Information System (INIS)

    Shay, M.R.; Buxbaum, M.E.

    1986-02-01

    The WASTES II model was developed to provide detailed analyses beyond the capabilities of other available models. WASTES uses discrete event simulation techniques to model the generation of commercial spent nuclear fuel, the buildup of spent fuel inventories within the system, and the transportation requirements for the movement of radioactive waste throughout the system. The model is written in FORTRAN 77 as an extension to the SLAM commercial simulation language package. In addition to the pool storage and dry storage located at the reactors, the WASTES model provides a choice of up to ten other storage facilities of four different types. The simulation performed by WASTES may be controlled by a combination of source- and/or destination-controlled transfers that are requested by the code user. The user supplies shipping cask characteristics for truck or rail shipment casks. As part of the facility description, the user specifies which casks the facility can use. Shipments within the system can be user specified to occur optimally, or proximally. Optimized shipping can be used when exactly two destination facilities of the same facility type are open for receipt of fuel. Optimized shipping selects source/destination pairs so that the total shipping distance or total shipping costs in a given year are minimized when both facilities are fully utilized. Proximity shipping sequentially fills the closest facility to the source according to the shipment priorities without regard for the total annual shipments. This results in sub-optimal routing of waste material but can be used to approximate an optimal shipping strategy when more than two facilities of the same type are available to receive waste. WASTES is currently able to analyze each of the commercial spent fuel logistics scenarios specified in the 1985 DOE Mission Plan

  2. hiv prevention among drug and alcohol users: models of ...

    African Journals Online (AJOL)

    Administrator

    HIV PREVENTION AMONG DRUG AND ALCOHOL USERS: MODELS. OF INTERVENTION IN KENYA. Clement S. Deveau. Academy for Educational Development (AED). Capable Partners Program (CAP). Nairobi, Kenya. ABSTRACT. The spread of HIV among drug and alcohol users, as a high-risk group, is a significant ...

  3. Site Structure and User Navigation: Models, Measures and Methods

    NARCIS (Netherlands)

    Herder, E.; van Dijk, Elisabeth M.A.G.; Chen, S.Y; Magoulas, G.D.

    2004-01-01

    The analysis of the structure of Web sites and patterns of user navigation through these sites is gaining attention from different disciplines, as it enables unobtrusive discovery of user needs. In this chapter we give an overview of models, measures, and methods that can be used for analysis

  4. Model driven development of user interface prototypes

    DEFF Research Database (Denmark)

    Störrle, Harald

    2010-01-01

    the whole UI development life cycle, connect all stakeholders involved, and support a wide range of levels of granularity and abstraction. This is achieved by using Window/Event-Diagrams (WEDs), a UI specification notation based on UML 2 state machines. It affords closer collaboration between different user...... groups like graphic designers and software developers by integrating traditional pen-and-paper based methods with contemporary MDA-based CASE tools. We have implemented our approach in the Advanced Interaction Design Environemnt (AIDE), an application to support WEDs....

  5. Decay of super-heavy particles: user guide of the SHdecay program

    Science.gov (United States)

    Barbot, C.

    2004-02-01

    I give here a detailed user guide for the C++ program SHdecay, which has been developed for computing the final spectra of stable particles (protons, photons, LSPs, electrons, neutrinos of the three species and their antiparticles) arising from the decay of a super-heavy X particle. It allows to compute in great detail the complete decay cascade for any given decay mode into particles of the Minimal Supersymmetric Standard Model (MSSM). In particular, it takes into account all interactions of the MSSM during the perturbative cascade (including not only QCD, but also the electroweak and 3rd generation Yukawa interactions), and includes a detailed treatment of the SUSY decay cascade (for a given set of parameters) and of the non-perturbative hadronization process. All these features allow us to ensure energy conservation over the whole cascade up to a numerical accuracy of a few per mille. Yet, this program also allows to restrict the computation to QCD or SUSY-QCD frameworks. I detail the input and output files, describe the role of each part of the program, and include some advice for using it best. Program summaryTitle of program: SHdecay Catalogue identifier:ADSL Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADSL Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Computer and operating system: Program tested on PC running Linux KDE and Suse 8.1 Programming language used: C with STL C++ library and using the standard gnu g++ compiler No. lines in distributed program: 14 955 No. of bytes in distributed program, including test data, etc.: 624 487 Distribution format: tar gzip file Keywords: Super-heavy particles, fragmentation functions, DGLAP equations, supersymmetry, MSSM, UHECR Nature of physical problem: Obtaining the energy spectra of the final stable decay products (protons, photons, electrons, the three species of neutrinos and the LSPs) of a decaying super-heavy X particle, within the framework of the Minimal

  6. Manufacturing Cost Levelization Model – A User’s Guide

    Energy Technology Data Exchange (ETDEWEB)

    Morrow, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shehabi, Arman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Smith, Sarah Josephine [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-08-01

    The Manufacturing Cost Levelization Model is a cost-performance techno-economic model that estimates total large-scale manufacturing costs for necessary to produce a given product. It is designed to provide production cost estimates for technology researchers to help guide technology research and development towards an eventual cost-effective product. The model presented in this user’s guide is generic and can be tailored to the manufacturing of any product, including the generation of electricity (as a product). This flexibility, however, requires the user to develop the processes and process efficiencies that represents a full-scale manufacturing facility. The generic model is comprised of several modules that estimate variable costs (material, labor, and operating), fixed costs (capital & maintenance), financing structures (debt and equity financing), and tax implications (taxable income after equipment and building depreciation, debt interest payments, and expenses) of a notional manufacturing plant. A cash-flow method is used to estimate a selling price necessary for the manufacturing plant to recover its total cost of production. A levelized unit sales price ($ per unit of product) is determined by dividing the net-present value of the manufacturing plant’s expenses ($) by the net present value of its product output. A user defined production schedule drives the cash-flow method that determines the levelized unit price. In addition, an analyst can increase the levelized unit price to include a gross profit margin to estimate a product sales price. This model allows an analyst to understand the effect that any input variables could have on the cost of manufacturing a product. In addition, the tool is able to perform sensitivity analysis, which can be used to identify the key variables and assumptions that have the greatest influence on the levelized costs. This component is intended to help technology researchers focus their research attention on tasks

  7. User experience & user-centered design : Health games user research model

    NARCIS (Netherlands)

    Jef Folkerts

    2014-01-01

    This poster sketches the outlines of a theoretical research framework to assess whether and on what grounds certain behavioral effects may be attributed to particular game mechanics and game play aspects. It is founded on the Elaboration Likelihood Model of Persuasion (ELM), which is quite

  8. Nuclear Detection Figure Of Merit (NDFOM) Version 1.2 User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Stroud, Phillip D [Los Alamos National Laboratory; Dufresne, Thomas A. [Los Alamos National Laboratory

    2012-08-27

    NDFOM is a detector database and detector evaluation system, accessible as a web service. It runs on the same server as the Patriot service, but uses port 8081. In this user's guide, we will use the example case that the patriot service is running on http://patriot.lanl.gov. Then the NDFOM service would be accessible at the URL http://patriot.lanl.gov:8081/ndfom. In addition to local server installations, common server locations are 1) a patriot server running on a virtual machine (use the virtual machine URL with :8081/ndfom), and 2) a patriot server running on a local machine (use http://localhost:8081/ndfom or http://127.0.0.1:8081/ndfom). The home screen provides panels to select detectors, a scenario, and a figure-of-merit. It also has an 'analyze' button, which will evaluate the selected figure-of-merit for the selected detectors, for the scenario selected by the user. The detector effectiveness evaluations are presented through the browser in a ranked list of detectors. The user does not need to log in to perform analysis with pre-supplied detectors, scenarios, and FOMs. The homepage view is shown in Figure 1. The first panel displays a list of the detectors in the current detector database. The user can select one, some, or all detectors to evaluate. On the right of each listed detector, there is a star icon. Clicking that icon will open a panel that displays the details about that detector, such as detector material, dimensions, thresholds, etc. The center panel displays the pre-supplied scenarios that are in the database. A scenario specifies the source of interest, the spectrum of the radiation, the background radiation spectrum, the distance or distance of closest approach, the allowable false positive rate, and the dwell time or speed. Scenario details can be obtained by clicking the star to the right of a scenario. A scenario can be selected by clicking it.

  9. SBexpert users guide (version 2.0): a knowledge-based decision-support system for spruce beetle management.

    Science.gov (United States)

    Keith M. Reynolds; Edward H. Holsten

    1997-01-01

    SBexpert version 2.0 is a knowledge-based decision-support system for spruce beetle (Dendroctonus rufipennis (Kby.)) management developed for use in Microsoft (MS) Windows with the KnowledgePro Windows development language. Version 2.0 is a significant enhancement of version 1.0. The SBexpert users guide provides detailed instructions on the use of...

  10. SBexpert users guide (version 1.0): a knowledge-based decision-support system for spruce beetle management.

    Science.gov (United States)

    Keith M. Reynolds; Edward H. Holsten; Richard A. Werner

    1994-01-01

    SBexpert version 1.0 is a knowledge-based decision-support system for spruce beetle (Dendroctonus rutipennis (Kby.)) management developed for use in Microsoft Windows with the KnowledgePro Windows development language. The SBexpert users guide provides detailed instructions on the use of all SBexpert features. SBexpert has four main topics (...

  11. Research on potential user identification model for electric energy substitution

    Science.gov (United States)

    Xia, Huaijian; Chen, Meiling; Lin, Haiying; Yang, Shuo; Miao, Bo; Zhu, Xinzhi

    2018-01-01

    The implementation of energy substitution plays an important role in promoting the development of energy conservation and emission reduction in china. Energy service management platform of alternative energy users based on the data in the enterprise production value, product output, coal and other energy consumption as a potential evaluation index, using principal component analysis model to simplify the formation of characteristic index, comprehensive index contains the original variables, and using fuzzy clustering model for the same industry user’s flexible classification. The comprehensive index number and user clustering classification based on constructed particle optimization neural network classification model based on the user, user can replace electric potential prediction. The results of an example show that the model can effectively predict the potential of users’ energy potential.

  12. Dynamic Trust Models between Users over Social Networks

    Science.gov (United States)

    2016-03-30

    the- art hTrust and its variants for solving the trust -link prediction problem. In addition to the above main research results, we developed a...AFRL-AFOSR-JP-TR-2016-0039 Dynamic Trust Models between Users over Social Networks Kazumi Saito University Of Shizuoka Final Report 04/05/2016...2013 to 30-03-2016 4. TITLE AND SUBTITLE (134042) Dynamic Trust Models between Users over Social Networks 5a. CONTRACT NUMBER FA2386-13-1

  13. Precipitation-runoff modeling system; user's manual

    Science.gov (United States)

    Leavesley, G.H.; Lichty, R.W.; Troutman, B.M.; Saindon, L.G.

    1983-01-01

    The concepts, structure, theoretical development, and data requirements of the precipitation-runoff modeling system (PRMS) are described. The precipitation-runoff modeling system is a modular-design, deterministic, distributed-parameter modeling system developed to evaluate the impacts of various combinations of precipitation, climate, and land use on streamflow, sediment yields, and general basin hydrology. Basin response to normal and extreme rainfall and snowmelt can be simulated to evaluate changes in water balance relationships, flow regimes, flood peaks and volumes, soil-water relationships, sediment yields, and groundwater recharge. Parameter-optimization and sensitivity analysis capabilites are provided to fit selected model parameters and evaluate their individual and joint effects on model output. The modular design provides a flexible framework for continued model system enhancement and hydrologic modeling research and development. (Author 's abstract)

  14. User's Guide for Hysteretic Capillary Pressure and Relative Permeability Functions in iTOUGH2

    Energy Technology Data Exchange (ETDEWEB)

    Doughty, C.A.

    2009-08-01

    The precursor of TOUGH2, TOUGH, was originally developed with non-hysteretic characteristic curves. Hysteretic capillary pressure functions were implemented in TOUGH in the late 1980s by Niemi and Bodvarsson (1988), and hysteretic capillary pressure and relative permeability functions were added to iTOUGH2 about ten years later by Finsterle et al. (1998). Recently, modifications were made to the iTOUGH2 hysteretic formulation to make it more robust and efficient (Doughty, 2007). Code development is still underway, with the ultimate goal being a hysteretic module that fits into the standard TOUGH2 (Pruess et al., 1991) framework. This document provides a user's guide for the most recent version of the hysteretic code, which runs within iTOUGH2 (Finsterle, 1999a,b,c). The current code differs only slightly from what was presented in Doughty (2007), hence that document provides the basic information on the processes being modeled and how they are conceptualized. This document focuses on a description of the user-specified parameters required to run hysteretic iTOUGH2. In the few instances where the conceptualization differs from that of Doughty (2007), the features described here are the current ones. Sample problems presented in this user's guide use the equation-of-state module ECO2N (Pruess, 2005). The components present in ECO2N are H{sub 2}O, NaCl, and CO{sub 2}. Two fluid phases and one solid phase are considered: an aqueous phase, which primarily consists of liquid H2O and may contain dissolved NaCl and CO{sub 2}; a supercritical phase which primarily consists of CO{sub 2}, but also includes a small amount of gaseous H{sub 2}O; and a solid phase consisting of precipitated NaCl. Details of the ECO2N formulation may be found in Pruess (2005). The aqueous phase is the wetting phase and is denoted ''liquid'', whereas the supercritical phase is the non-wetting phase and is denoted ''gas''. The hysteretic formalism

  15. Comp23/Nuctran user's guide. Proper version 1.1.6

    International Nuclear Information System (INIS)

    Romero, L.; Thompson, A.; Moreno, L.; Neretnieks, I.; Widen, H.; Boghammar, A.

    1999-10-01

    NUCTRAN is a fast multiple path model that calculates nuclide transport in the near field of a repository as occurring through a network of resistances and capacitances coupled together like an electrical circuit network. The model, which is a very coarsely discretized integrated finite difference model, was devised to be very fast and compact by embedding analytical solutions at sensitive zones. The code allows the user to simultaneously consider a multitude of pathways by which the nuclides are transported by diffusion to the flowing water in fractures surrounding the barrier system. The nuclide dissolution may be calculated using two approaches, a solubility limit approach or a congruent dissolution approach. The conceptual model used in NUCTRAN can be represented by three bodies. The bodies are the source, the barrier system, and the sinks. The source is defined as a well-mixed compartment. The barrier system is the physical medium by which the nuclides migrate to reach the sinks located in the surrounding system or outside of the region considered as the barrier system. The sinks, considered as recipients where the water flows, are fully defined by a local equivalent flow rate. The purpose of this document is to assist the user in managing problems with NUCTRAN. An overview of the theory, numerical method, and the code designed to solve the problem are presented. Finally, an example is handled in detail

  16. A user's guide to coping with estuarine management bureaucracy: An Estuarine Planning Support System (EPSS) tool.

    Science.gov (United States)

    Lonsdale, Jemma; Nicholson, Rose; Weston, Keith; Elliott, Michael; Birchenough, Andrew; Sühring, Roxana

    2018-02-01

    Estuaries are amongst the most socio-economically and ecologically important environments however, due to competing and conflicting demands, management is often challenging with a complex legislative framework managed by multiple agencies. To facilitate the understanding of this legislative framework, we have developed a GISbased Estuarine Planning Support System tool. The tool integrates the requirements of the relevant legislation and provides a basis for assessing the current environmental state of an estuary as well as informing and assessing new plans to ensure a healthy estuarine state. The tool ensures that the information is easily accessible for regulators, managers, developers and the public. The tool is intended to be adaptable, but is assessed using the Humber Estuary, United Kingdom as a case study area. The successful application of the tool for complex socio-economic and environmental systems demonstrates that the tool can efficiently guide users through the complex requirements needed to support sustainable development. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  17. Users guide for ENVSTD program Version 2. 0 and LTGSTD program Version 2. 0

    Energy Technology Data Exchange (ETDEWEB)

    Crawley, D.B.; Riesen, P.K.; Briggs, R.S.

    1989-02-01

    On January 30, 1989, the US Department of Energy (DOE) promulgated 10 CFR Part 435, Subpart A, an Interim Rule entitled ''Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings.'' As a consequence, federal agencies must design all future federal commercial and multifamily high rise residential buildings in accordance with the Standards, or show that their current standards already meet or exceed the energy-efficiency requirements of the Standards. Although these newly enacted Standards do not regulate the design of nonfederal buildings, DOE recommends that all design professionals use the Standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the Standards were presented in the January 30, 1989, Federal Register in the format typical of commercial standards rather than a federal regulation. As a further help, DOE supported the development of various microcomputer programs to ease the use of the Standards. Two of these programs/emdash/ENVSTD (Version 2.0) and LTGSTD (Version 2.0)/emdash/are detailed in this users guide and provided on the accompanying diskette. This package, developed by Pacific Northwest Laboratory (PNL), is intended to facilitate the designer's use of the Standards dealing specifically with a building's envelope and lighting system designs. Using these programs will greatly simplify the designer's task of performing the sometimes complex calculations needed to determine a design's compliance with the Standards. 3 refs., 6 figs.

  18. User's guide for LTGSTD24 program, Version 2. 4

    Energy Technology Data Exchange (ETDEWEB)

    Hanlon, R.L.; Connell, L.M.

    1993-05-01

    On January 30, 1989, the US Department of Energy (DOE) promulgated an interim rule entitled [open quotes]Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings[close quotes] (10 CFR Part 435, Subpart A). These standards require federal agencies to design all future federal commercial and multifamily high-rise residential buildings in accordance with the standards, or demonstrate that their current requirements already meet or exceed the energy-efficiency requirements of the standards. Although these newly enacted standards do not regulate the design of non-federal buildings, the DOE recommends that all design professionals use the standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the DOE published the standards in the January 30, 1989, Federal Register in the format typical of commercial standards. The Pacific Northwest Laboratory developed several computer programs for the DOE to make it easier for designers to comply with the standards. One of the programs, LTGSTD24 (Version 2.4), is detailed in this user's guide and is provided on the accompanying diskettes. The program will facilitate the designer's use of the standards dealing specifically with building lighting design. Using this program will greatly simplify the designer's task of performing the calculations needed to determine if a design complies with the standards.

  19. Sequence Coding and Search System for licensee event reports: user's guide. Volume 1, Revision 1

    International Nuclear Information System (INIS)

    Greene, N.M.; Mays, G.T.; Johnson, M.P.

    1985-04-01

    Operating experience data from nuclear power plants are essential for safety and reliability analyses, especially analyses of trends and patterns. The licensee event reports (LERs) that are submitted to the Nuclear Regulatory Commission (NRC) by the nuclear power plant utilities contain much of this data. The NRC's Office for Analysis and Evaluation of Operational Data (AEOD) has developed, under contract with NSIC, a system for codifying the events reported in the LERs. The primary objective of the Sequence Coding and Search System (SCSS) is to reduce the descriptive text of the LERs to coded sequences that are both computer-readable and computer-searchable. This system provides a structured format for detailed coding of component, system, and unit effects as well as personnel errors. The database contains all current LERs submitted by nuclear power plant utilities for events occurring since 1981 and is updated on a continual basis. This four volume report documents and describes SCSS in detail. Volume 1 is a User's Guide for searching the SCSS database. This volume contains updated material through February 1985 of the working version of ORNL/NSIC-223, Vol. 1

  20. The NexStar evolution and SkyPortal user's guide

    CERN Document Server

    Chen, James L

    2016-01-01

    This book serves as a comprehensive guide for using a Nexstar Evolution mount with WiFi SkyPortal control, walking the reader through the process for aligning and operating the system from a tablet or smartphone. The next generation Go-To mount from Celestron, this is compatible not only with the Nextstar Evolution but also with older mounts. It is the ideal resource for anyone who owns, or is thinking of owning, a Nexstar Evolution telescope, or adapting their existing Celestron mount. Pros and cons of the system are thoroughly covered with a critical depth that addresses any possible question by users. Beginning with a brief history of Go-To telescopes and the genesis of this still new technology, the author covers every aspect of the newly expanding capability in observing. This includes the associated Sky Portal smartphone and tablet application, the transition from the original Nexstar GoTo system to the new SkyPortal system, the use of the Sky Portal application with its Sky Safari 4 basic software and ...

  1. User verification of the FRBR conceptual model

    OpenAIRE

    Pisanski, Jan; Žumer, Maja

    2015-01-01

    Purpose - The paper aims to build on of a previous study of mental model s of the bibliographic universe, which found that the Functional Requirements for Bibliographic Records (FRBR) conceptual model is intuitive. Design/ methodology/approach - A total 120 participants were presented with a list of bibliographic entities and six graphs each. They were asked to choose the graph they thought best represented the relationships between entities described. Findings - The graph bas ed on the FRBR ...

  2. INTERLINE, a railroad routing model: program description and user's manual

    International Nuclear Information System (INIS)

    Peterson, B.E.

    1985-11-01

    INTERLINE is an interactive computer program that finds likely routes for shipments over the US railroad system. It is based on a shortest path algorithm modified both to reflect the nature of railroad company operations and to accommodate computer resource limitations in dealing with a large transportation network. The first section of the report discusses the nature of railroad operations and routing practices in the United States, including the tendency to concentrate traffic on a limited number of mainlines, the competition for traffic by different companies operating in the same corridors, and the tendency of originating carriers to retain traffic on their systems before transferring it to terminating carriers. The theoretical foundation and operation of shortest path algorithms are described, as well as the techniques used to simulate actual operating practices within this framework. The second section is a user's guide that describes the program operation and data structures, program features, and user access. 11 refs., 11 figs

  3. Discrete Feature Model (DFM) User Documentation

    International Nuclear Information System (INIS)

    Geier, Joel

    2008-06-01

    This manual describes the Discrete-Feature Model (DFM) software package for modelling groundwater flow and solute transport in networks of discrete features. A discrete-feature conceptual model represents fractures and other water-conducting features around a repository as discrete conductors surrounded by a rock matrix which is usually treated as impermeable. This approximation may be valid for crystalline rocks such as granite or basalt, which have very low permeability if macroscopic fractures are excluded. A discrete feature is any entity that can conduct water and permit solute transport through bedrock, and can be reasonably represented as a piecewise-planar conductor. Examples of such entities may include individual natural fractures (joints or faults), fracture zones, and disturbed-zone features around tunnels (e.g. blasting-induced fractures or stress-concentration induced 'onion skin' fractures around underground openings). In a more abstract sense, the effectively discontinuous nature of pathways through fractured crystalline bedrock may be idealized as discrete, equivalent transmissive features that reproduce large-scale observations, even if the details of connective paths (and unconnected domains) are not precisely known. A discrete-feature model explicitly represents the fundamentally discontinuous and irregularly connected nature of systems of such systems, by constraining flow and transport to occur only within such features and their intersections. Pathways for flow and solute transport in this conceptualization are a consequence not just of the boundary conditions and hydrologic properties (as with continuum models), but also the irregularity of connections between conductive/transmissive features. The DFM software package described here is an extensible code for investigating problems of flow and transport in geological (natural or human-altered) systems that can be characterized effectively in terms of discrete features. With this software, the

  4. Discrete Feature Model (DFM) User Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Geier, Joel (Clearwater Hardrock Consulting, Corvallis, OR (United States))

    2008-06-15

    This manual describes the Discrete-Feature Model (DFM) software package for modelling groundwater flow and solute transport in networks of discrete features. A discrete-feature conceptual model represents fractures and other water-conducting features around a repository as discrete conductors surrounded by a rock matrix which is usually treated as impermeable. This approximation may be valid for crystalline rocks such as granite or basalt, which have very low permeability if macroscopic fractures are excluded. A discrete feature is any entity that can conduct water and permit solute transport through bedrock, and can be reasonably represented as a piecewise-planar conductor. Examples of such entities may include individual natural fractures (joints or faults), fracture zones, and disturbed-zone features around tunnels (e.g. blasting-induced fractures or stress-concentration induced 'onion skin' fractures around underground openings). In a more abstract sense, the effectively discontinuous nature of pathways through fractured crystalline bedrock may be idealized as discrete, equivalent transmissive features that reproduce large-scale observations, even if the details of connective paths (and unconnected domains) are not precisely known. A discrete-feature model explicitly represents the fundamentally discontinuous and irregularly connected nature of systems of such systems, by constraining flow and transport to occur only within such features and their intersections. Pathways for flow and solute transport in this conceptualization are a consequence not just of the boundary conditions and hydrologic properties (as with continuum models), but also the irregularity of connections between conductive/transmissive features. The DFM software package described here is an extensible code for investigating problems of flow and transport in geological (natural or human-altered) systems that can be characterized effectively in terms of discrete features. With this

  5. NATO Reference Mobility Model. Edition I. Users Guide. Volume I

    Science.gov (United States)

    1979-10-01

    be resolved by considering the locations of the two roots of F = cnv 2 + bnv + (an - RTki) = 0. As long as the quadratic on the left hand side...CISTANCE PER MONTH C RDFCG FEET WEATHER RECOGNITION CISTANCE C RCIC(1) RCI SGIL STRENGHT DRY C RCIC(21 RCI SOIL STRENGIHT - AVERAGE C KCIC(31 RCI SOIL

  6. WASP7 BENTHIC ALGAE - MODEL THEORY AND USER'S GUIDE

    Science.gov (United States)

    The standard WASP7 eutrophication module includes nitrogen and phosphorus cycling, dissolved oxygen-organic matter interactions, and phytoplankton kinetics. In many shallow streams and rivers, however, the attached algae (benthic algae, or periphyton, attached to submerged substr...

  7. Designing user models in a virtual cave environment

    Energy Technology Data Exchange (ETDEWEB)

    Brown-VanHoozer, S. [Argonne National Lab., Idaho Falls, ID (United States); Hudson, R. [Argonne National Lab., IL (United States); Gokhale, N. [Madge Networks, San Jose, CA (United States)

    1995-12-31

    In this paper, the results of a first study into the use of virtual reality for human factor studies and design of simple and complex models of control systems, components, and processes are described. The objective was to design a model in a virtual environment that would reflect more characteristics of the user`s mental model of a system and fewer of the designer`s. The technology of a CAVE{trademark} virtual environment and the methodology of Neuro Linguistic Programming were employed in this study.

  8. XRLSim model specifications and user interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ng, L.C.; Gavel, D.T.; Shectman, R.M.; Sholl, P.L.; Woodruff, J.P.

    1989-04-01

    This report summarizes our FY88 engineering development effort of XRLSim --- an Ada-based computer program developed to provide a realistic simulation of an x-ray laser weapon platform. XRLSim can be used to assess platform requirements in track handoff, target acquisition, tracking, and pointing as well as engagement time line. Development effort continues in FY89 to enhance the model fidelity of the platform and to improve the performance of the tracking algorithms. Simulated targets available in XRLSim include midcourse reentry vehicles and orbiting satellites. At this time, the current version of XRLSim can only simulate a one-on-one engagement scenario. 8 refs., 26 figs.

  9. Long-term pavement performance pavement loading user guide (LTPP PLUG).

    Science.gov (United States)

    2013-10-01

    "This guide addresses the selection and use of axle loading defaults for Mechanistic-Empirical Pavement Design : Guide (MEPDG) applications. The defaults were developed based on weigh-in-motion (WIM) data from the Long- : Term Pavement Performance (L...

  10. Modeling mutual feedback between users and recommender systems

    Science.gov (United States)

    Zeng, An; Yeung, Chi Ho; Medo, Matúš; Zhang, Yi-Cheng

    2015-07-01

    Recommender systems daily influence our decisions on the Internet. While considerable attention has been given to issues such as recommendation accuracy and user privacy, the long-term mutual feedback between a recommender system and the decisions of its users has been neglected so far. We propose here a model of network evolution which allows us to study the complex dynamics induced by this feedback, including the hysteresis effect which is typical for systems with non-linear dynamics. Despite the popular belief that recommendation helps users to discover new things, we find that the long-term use of recommendation can contribute to the rise of extremely popular items and thus ultimately narrow the user choice. These results are supported by measurements of the time evolution of item popularity inequality in real systems. We show that this adverse effect of recommendation can be tamed by sacrificing part of short-term recommendation accuracy.

  11. Modeling and evaluating user behavior in exploratory visual analysis

    Energy Technology Data Exchange (ETDEWEB)

    Reda, Khairi; Johnson, Andrew E.; Papka, Michael E.; Leigh, Jason

    2016-07-25

    Empirical evaluation methods for visualizations have traditionally focused on assessing the outcome of the visual analytic process as opposed to characterizing how that process unfolds. There are only a handful of methods that can be used to systematically study how people use visualizations, making it difficult for researchers to capture and characterize the subtlety of cognitive and interaction behaviors users exhibit during visual analysis. To validate and improve visualization design, however, it is important for researchers to be able to assess and understand how users interact with visualization systems under realistic scenarios. This paper presents a methodology for modeling and evaluating the behavior of users in exploratory visual analysis. We model visual exploration using a Markov chain process comprising transitions between mental, interaction, and computational states. These states and the transitions between them can be deduced from a variety of sources, including verbal transcripts, videos and audio recordings, and log files. This model enables the evaluator to characterize the cognitive and computational processes that are essential to insight acquisition in exploratory visual analysis, and reconstruct the dynamics of interaction between the user and the visualization system. We illustrate this model with two exemplar user studies, and demonstrate the qualitative and quantitative analytical tools it affords.

  12. MWIR-1995 DOE national mixed and TRU waste database users guide

    International Nuclear Information System (INIS)

    1995-11-01

    The Department of Energy (DOE) National 1995 Mixed Waste Inventory Report (MWIR-1995) Database Users Guide provides information on computer system requirements and describes installation, operation, and navigation through the database. The MWIR-1995 database contains a detailed, nationwide compilation of information on DOE mixed waste streams and treatment systems. In addition, the 1995 version includes data on non- mixed, transuranic (TRU) waste streams. These were added to the data set as a result of coordination of the 1995 update with the National Transuranic Program Office's (NTPO's) data needs to support the Waste Isolation Pilot Plant (WIPP) TRU Waste Baseline Inventory Report (WTWBIR). However, the information on the TRU waste streams is limited to that associated with the core mixed waste data requirements. The additional, non-core data on TRU streams collected specifically to support the WTWBIR is not included in the MWIR-1995 database. With respect to both the mixed and TRU waste stream data, the data set addresses open-quotes storedclose quotes streams. In this instance, open-quotes storedclose quotes streams are defined as (a) streams currently in storage at both EM-30 and EM-40 sites and (b) streams that have yet to be generated but are anticipated within the next five years from sources other than environmental restoration and decontamination and decommissioning (ER/D ampersand D) activities. Information on future ER/D ampersand D streams is maintained in the EM-40 core database. The MWIR-1995 database also contains limited information for both waste streams and treatment systems that have been removed or deleted since the 1994 MWIR. Data on these is maintained only through Section 2, Waste Stream Identification/Tracking/Source, to document the reason for removal from the data set

  13. Earthquake Early Warning Beta Users: Java, Modeling, and Mobile Apps

    Science.gov (United States)

    Strauss, J. A.; Vinci, M.; Steele, W. P.; Allen, R. M.; Hellweg, M.

    2014-12-01

    Earthquake Early Warning (EEW) is a system that can provide a few to tens of seconds warning prior to ground shaking at a user's location. The goal and purpose of such a system is to reduce, or minimize, the damage, costs, and casualties resulting from an earthquake. A demonstration earthquake early warning system (ShakeAlert) is undergoing testing in the United States by the UC Berkeley Seismological Laboratory, Caltech, ETH Zurich, University of Washington, the USGS, and beta users in California and the Pacific Northwest. The beta users receive earthquake information very rapidly in real-time and are providing feedback on their experiences of performance and potential uses within their organization. Beta user interactions allow the ShakeAlert team to discern: which alert delivery options are most effective, what changes would make the UserDisplay more useful in a pre-disaster situation, and most importantly, what actions users plan to take for various scenarios. Actions could include: personal safety approaches, such as drop cover, and hold on; automated processes and procedures, such as opening elevator or fire stations doors; or situational awareness. Users are beginning to determine which policy and technological changes may need to be enacted, and funding requirements to implement their automated controls. The use of models and mobile apps are beginning to augment the basic Java desktop applet. Modeling allows beta users to test their early warning responses against various scenarios without having to wait for a real event. Mobile apps are also changing the possible response landscape, providing other avenues for people to receive information. All of these combine to improve business continuity and resiliency.

  14. Modeling Users, Context and Devices for Ambient Assisted Living Environments

    Science.gov (United States)

    Castillejo, Eduardo; Almeida, Aitor; López-de-Ipiña, Diego; Chen, Liming

    2014-01-01

    The participation of users within AAL environments is increasing thanks to the capabilities of the current wearable devices. Furthermore, the significance of considering user's preferences, context conditions and device's capabilities help smart environments to personalize services and resources for them. Being aware of different characteristics of the entities participating in these situations is vital for reaching the main goals of the corresponding systems efficiently. To collect different information from these entities, it is necessary to design several formal models which help designers to organize and give some meaning to the gathered data. In this paper, we analyze several literature solutions for modeling users, context and devices considering different approaches in the Ambient Assisted Living domain. Besides, we remark different ongoing standardization works in this area. We also discuss the used techniques, modeled characteristics and the advantages and drawbacks of each approach to finally draw several conclusions about the reviewed works. PMID:24643006

  15. User Experience document on VRC Design Guide - D6.1

    OpenAIRE

    Kale Namrata; Haug Kenneth; Moreno Pablo

    2015-01-01

    This document is a comprehensive report on the first user experience (UX) workshop hosted to ensure a user centric design and usability of the PhenoMeNal Virtual Research Environment (VRE), aka. Virtual Research Community (VRC).

  16. A user's guide to the programs ITRAP-A, ITRAP-B, ITRAP-S and ITRAP-L

    International Nuclear Information System (INIS)

    Manley, A.J.

    1979-03-01

    The four programs ITRAP-A, ITRAP-B, ITRAP-S and ITRAP-L are designed to calculate parameters required for assessing the performance of iodine trapping plant installed in the ventilation systems of enclosures in which radioactive materials are handled. This guide sets out the input to and output from these programs for plant managers and gives sufficient program details to enable the users to assess the accuracy of the methods used. (author)

  17. User's Guide for the NREL Force and Loads Analysis Program. [National Renewable Energy Laboratory (NREL)

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A.D.

    1992-08-01

    The following report gives the reader an overview of and instructions on the proper use of the National Renewable Energy Laboratory Force and Loads Analysis Program (FLAP, version 2.2). It is intended as a tool for prediction of rotor and blade loads and response for two- or three-bladed rigid hub wind turbines. The effects of turbulence are accounted for. The objectives of the report are to give an overview of the code and also show the methods of data input and correct code execution steps in order to model an example two-bladed rigid hub turbine. A large portion of the discussion (Sections 6.0, 7.0, and 8.0) is devoted to the subject of inputting and running the code for wind turbulence effects. The ability to include turbulent wind effects is perhaps the biggest change in the code since the release of FLAP version 2.01 in 1988. This report is intended to be a user's guide. It does not contain a theoretical discussion on equations of motion, assumptions, underlying theory, etc. It is intended to be used in conjunction with Wright, Buhl, and Thresher (1988).

  18. Evaluating intersectoral collaboration: a model for assessment by service users

    Directory of Open Access Journals (Sweden)

    Bengt Ahgren

    2009-02-01

    Full Text Available Introduction: DELTA was launched as a project in 1997 to improve intersectoral collaboration in the rehabilitation field. In 2005 DELTA was transformed into a local association for financial co-ordination between the institutions involved. Based on a study of the DELTA service users, the purpose of this article is to develop and to validate a model that can be used to assess the integration of welfare services from the perspective of the service users. Theory: The foundation of integration is a well functioning structure of integration. Without such structural conditions, it is difficult to develop a process of integration that combines the resources and competences of the collaborating organisations to create services advantageous for the service users. In this way, both the structure and the process will contribute to the outcome of integration. Method: The study was carried out as a retrospective cross-sectional survey during two weeks, including all the current service users of DELTA. The questionnaire contained 32 questions, which were derived from the theoretical framework and research on service users, capturing perceptions of integration structure, process and outcome. Ordinal scales and open questions where used for the assessment. Results: The survey had a response rate of 82% and no serious biases of the results were detected. The study shows that the users of the rehabilitation services perceived the services as well integrated, relevant and adapted to their needs. The assessment model was tested for reliability and validity and a few modifications were suggested. Some key measurement themes were derived from the study. Conclusion: The model developed in this study is an important step towards an assessment of service integration from the perspective of the service users. It needs to be further refined, however, before it can be used in other evaluations of collaboration in the provision of integrated welfare services.

  19. A FORTRAN 77 Program and User's Guide for the Statistical Analyses of Scatterplots to Identify Important Factors in Large-Scale Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Helton, Jon C.; Shortencarier, Maichael J.

    1999-08-01

    A description and user's guide are given for a computer program, PATTRN, developed at Sandia National Laboratories for use in sensitivity analyses of complex models. This program is intended for use in the analysis of input-output relationships in Monte Carlo analyses when the input has been selected using random or Latin hypercube sampling. Procedures incorporated into the program are based upon attempts to detect increasingly complex patterns in scatterplots and involve the detection of linear relationships, monotonic relationships, trends in measures of central tendency, trends in measures of variability, and deviations from randomness. The program was designed to be easy to use and portable.

  20. Estimating Spoken Dialog System Quality with User Models

    CERN Document Server

    Engelbrecht, Klaus-Peter

    2013-01-01

    Spoken dialog systems have the potential to offer highly intuitive user interfaces, as they allow systems to be controlled using natural language. However, the complexity inherent in natural language dialogs means that careful testing of the system must be carried out from the very beginning of the design process.   This book examines how user models can be used to support such early evaluations in two ways:  by running simulations of dialogs, and by estimating the quality judgments of users. First, a design environment supporting the creation of dialog flows, the simulation of dialogs, and the analysis of the simulated data is proposed.  How the quality of user simulations may be quantified with respect to their suitability for both formative and summative evaluation is then discussed. The remainder of the book is dedicated to the problem of predicting quality judgments of users based on interaction data. New modeling approaches are presented, which process the dialogs as sequences, and which allow knowl...