WorldWideScience

Sample records for model system roms

  1. Regional Ocean Modeling System (ROMS): Samoa

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 7-day, 3-hourly forecast for the region surrounding the islands of Samoa at approximately 3-km resolution. While considerable...

  2. Regional Ocean Modeling System (ROMS): CNMI

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 7-day, 3-hourly forecast for the region surrounding the Commonwealth of the Northern Mariana Islands (CNMI) at approximately...

  3. Regional Ocean Modeling System (ROMS): CNMI: Data Assimilating

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 3-day, 3-hourly data assimilating hindcast for the region surrounding the Commonwealth of the Northern Mariana Islands (CNMI)...

  4. Regional Ocean Modeling System (ROMS): Oahu South Shore

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 2-day, 3-hourly forecast for the region surrounding the south shore of the island of Oahu at approximately 200-m resolution....

  5. Regional Ocean Modeling System (ROMS): Main Hawaiian Islands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 7-day, 3-hourly forecast for the region surrounding the main Hawaiian islands at approximately 4-km resolution. While...

  6. Regional Ocean Modeling System (ROMS): Samoa: Data Assimilating

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 3-day, 3-hourly data assimilating hindcast for the region surrounding the islands of Samoa at approximately 3-km resolution....

  7. Regional Ocean Modeling System (ROMS): Main Hawaiian Islands: Data Assimilating

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 3-day, 3-hourly data assimilating hindcast for the region surrounding the main Hawaiian islands at approximately 4-km...

  8. Parallel Computation of the Regional Ocean Modeling System (ROMS)

    Energy Technology Data Exchange (ETDEWEB)

    Wang, P; Song, Y T; Chao, Y; Zhang, H

    2005-04-05

    The Regional Ocean Modeling System (ROMS) is a regional ocean general circulation modeling system solving the free surface, hydrostatic, primitive equations over varying topography. It is free software distributed world-wide for studying both complex coastal ocean problems and the basin-to-global scale ocean circulation. The original ROMS code could only be run on shared-memory systems. With the increasing need to simulate larger model domains with finer resolutions and on a variety of computer platforms, there is a need in the ocean-modeling community to have a ROMS code that can be run on any parallel computer ranging from 10 to hundreds of processors. Recently, we have explored parallelization for ROMS using the MPI programming model. In this paper, an efficient parallelization strategy for such a large-scale scientific software package, based on an existing shared-memory computing model, is presented. In addition, scientific applications and data-performance issues on a couple of SGI systems, including Columbia, the world's third-fastest supercomputer, are discussed.

  9. Tidal simulation using regional ocean modeling systems (ROMS)

    Science.gov (United States)

    Wang, Xiaochun; Chao, Yi; Li, Zhijin; Dong, Changming; Farrara, John; McWilliams, James C.; Shum, C. K.; Wang, Yu; Matsumoto, Koji; Rosenfeld, Leslie K.; Paduan, Jeffrey D.

    2006-01-01

    The purpose of our research is to test the capability of ROMS in simulating tides. The research also serves as a necessary exercise to implement tides in an operational ocean forecasting system. In this paper, we emphasize the validation of the model tide simulation. The characteristics and energetics of tides of the region will be reported in separate publications.

  10. A review of modeling applications using ROMS model and COAWST system in the Adriatic sea region

    CERN Document Server

    Carniel, Sandro

    2013-01-01

    From the first implementation in its purely hydrodynamic configuration, to the last configuration under the Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST) system, several specific modelling applications of the Regional Ocean Modelling Systems (ROMS, www.myroms.org) have been put forward within the Adriatic Sea (Italy) region. Covering now a wide range of spatial and temporal scales, they developed in a growing number of fields supporting Integrated Coastal Zone Management (ICZM) and Marine Spatial Planning (MSP) activities in this semi-enclosed sea of paramount importance including the Gulf of Venice. Presently, a ROMS operational implementation provides every day hydrodynamic and sea level 3-days forecasts, while a second one models the most relevant biogeochemical properties, and a third one (two-way coupled with the Simulating Waves Nearshore (SWAN) model) deals with extreme waves forecast. Such operational models provide support to civil and environmental protection activities (e.g., driving su...

  11. A Community Terrain-Following Ocean Modeling System (ROMS)

    Science.gov (United States)

    2015-09-30

    coarser DOPPIO grid-a with an averaged resolution of 7km is the donor to the Hudson Canyon grid-b and the Chesapeake-Delaware Bays grid-d. The...ROMS nested grid application for the U.S. East Coast: (a) DOPPIO coarse grid, (b) Hudson Canyon refinement grid (1:3 ratio from a), (c) PIONEER array...temperature (upper panel; Celsius) and surface salinity (lower panel) for 31-Jan-2014. The refined solution for the Hudson Canyon grid is overlaid on

  12. STUDY OF CHLOROPHYLL-A DISTRIBUTIONS IN LOMBOK STRAIT USING BIOGEOCHEMICAL MODEL BASED ON REGIONAL OCEAN MODELLING SYSTEM (ROMS

    Directory of Open Access Journals (Sweden)

    KADEK ARY ANGGRAENI

    2015-06-01

    Full Text Available Regional Ocean Modelling System (ROMS has been intended to be a multi-purpose, multi-disciplinary oceanic modeling tool. The Biogeochemical model have coupled to ROMS consists of a system of seven coupled partial differential equations that include: nitrate, ammonium, small and large detritus, phytoplanJ..'ton, zooplankton, and a dynamic phytoplanJ..-ton carbon to chlorophyll ratio. The study of distribution patterns of chlorophyll-a in Lombok Strait (-7 °N - ·10 •sand 114 "E - 117 °E in 2006 was analyzed using the Biogeochemical model based on ROMS. The results show that low chlorophyll-a distributions (0.20 mgChl-a/m3 observed in Lombok Strait in ,January. Chlorophyll-a estimated around the southern part of Bali Strait and low chlorophyll-a distribution in upper layer of the Lomhok Strait. Chlorophyll-a of the booming (0.32 mgChl-a/m3 observed in August. The northeast current direction moves to the west and southern part of research area through Lombok Strait. The highest chlorophyll-a concentration estimated in the northern and southwestern part of Bali Tsland and also in the southern part of Lombok Island. During dry monsoon, southeasterly wind blow from Australia generates upwelling process (low temperature and nutrient-rich water near the surface also estimated from ROMS.

  13. STUDY OF CHLOROPHYLL-A DISTRIBUTIONS IN LOMBOK STRAIT USING BIOGEOCHEMICAL MODEL BASED ON REGIONAL OCEAN MODELLING SYSTEM (ROMS

    Directory of Open Access Journals (Sweden)

    KADEK ARY ANGGRENI

    2015-05-01

    Full Text Available Regional Ocean Modelling System atau Sistem Pemodelan Laut Regional (ROMS telah digunakan untuk bermacam keperluan, bermacam pemodelan kelautan. Model Biogeokimia yang dipasangkan dengan ROMS terdiri dari tujuh pasang bagian persamaan yang berbeda-beda mencakup: nitrat, amonium, detritus kecil dan besar, fitoplankton, zooplankton, dan karbon fitoplankton yang dinamis menjadi suatu rasio klorofi.1. Studi pola penyebaran klorofil-a di Selat Lombok (-7 °N - -10 °5 dan 114 °E - 117 °E pada tahun 2006 telah dianalisis menggunakan model Biogeokimia berdasar pada ROMS. Hasil penelitian menunjukkan bahwa sebaran klorofil-a teramati rendah (0,20 mgChl-a/m3 di Selat Lombok pada bulan Januari. Klorofil-a diperkirakan di bagian sebelah selatan Selat Bali dan penyebaran klorofil-a rendah pada lapisan atas dari Selat Lombok. Klorofil-a berlimpah (0,32 mgChl-a/m3 teramati di bulan Agustus. Arah arus timur laut bergerak kearah barat clan bagian selatan di daerah penelitian melalui Selat Lombok. Konsentrasi klorofil-a tertinggi diperkirakan di sebelah utara hingga bagian barat daya Pulau Bali clan juga di bagian selatan Pulau Lombok. Selama musim kering, angin arah tenggara berhembus dari Australia memicu terjadinya proses upwelling ( temperatur rendah clan air yang kaya nutrien di dekat permukaan juga diperkirakan berdasarkan ROMS.

  14. A Data-Assimilative Modeling System for the Gulf of Alaska based on the Regional Ocean Modeling System (ROMS)

    Science.gov (United States)

    Farrara, J.; Chao, Y.; Li, Z.; Wang, X.; Jin, X.; Li, P.

    2010-12-01

    A ROMS-based data-assimilative modeling system for the Gulf of Alaska (GoA) has been developed. A three-level, nested ROMS configuration is used: the largest level (L0) covers an extended region of the GoA at a horizontal resolution of 9km; the next level (L1) is nested in L0 and covers the northern GoA at a horizontal resolution of 3km; the last level (L2) is nested in L1 and focuses on the region around the Prince William Sound at a horizontal resolution of 1km. The system is forced at the ocean surface by output from regional and global atmospheric models and by freshwater runoff from land obtained via real-time execution of a digital elevation model forced by air temperature and precipitation data from the regional and global atmospheric models.. In-situ and satellite measurements are assimilated using a multi-scale 3-dimensional variational (MS-3DVAR) data assimilation scheme. In addition, parallel real-time runs of the system coupled with the COSINE ecosystem model have been performed. The performance of the system has recently been evaluated using data gathered during the Sound Predictions field experiment held in the Prince William Sound (PWS) region during summer 2009. During the experiment, the system was run daily in near real-time. Nowcasts were produced every 6 hours and a 48-hr forecast was run once per day.The overall flow pattern within the PWS as revealed by HF radar surface current observations and surface drifters was realistically reproduced by the ROMS model. In addition, a comparison of the model temperature and salinity profiles with those gathered by ship CTD, glider and Remus AUV show overall excellent agreement. For the temperature, the overall bias was found to be small (-0.12C) and the RMS difference was also reasonably small (0.83C) with good agreement across all temperatures (depths) sampled. For the salinity, there was good agreement at the higher salinities (larger depths), but there was a salty bias at lower salinities (shallower

  15. Simulation of Lake Victoria Circulation Patterns Using the Regional Ocean Modeling System (ROMS).

    Science.gov (United States)

    Nyamweya, Chrispine; Desjardins, Christopher; Sigurdsson, Sven; Tomasson, Tumi; Taabu-Munyaho, Anthony; Sitoki, Lewis; Stefansson, Gunnar

    2016-01-01

    Lake Victoria provides important ecosystem services including transport, water for domestic and industrial uses and fisheries to about 33 million inhabitants in three East African countries. The lake plays an important role in modulating regional climate. Its thermodynamics and hydrodynamics are also influenced by prevailing climatic and weather conditions on diel, seasonal and annual scales. However, information on water temperature and circulation in the lake is limited in space and time. We use a Regional Oceanographic Model System (ROMS) to simulate these processes from 1st January 2000 to 31st December 2014. The model is based on real bathymetry, river runoff and atmospheric forcing data using the bulk flux algorithm. Simulations show that the water column exhibits annual cycles of thermo-stratification (September-May) and mixing (June-August). Surface water currents take different patterns ranging from a lake-wide northward flow to gyres that vary in size and number. An under flow exists that leads to the formation of upwelling and downwelling regions. Current velocities are highest at the center of the lake and on the western inshore waters indicating enhanced water circulation in those areas. However, there is little exchange of water between the major gulfs (especially Nyanza) and the open lake, a factor that could be responsible for the different water quality reported in those regions. Findings of the present study enhance understanding of the physical processes (temperature and currents) that have an effect on diel, seasonal, and annual variations in stratification, vertical mixing, inshore-offshore exchanges and fluxes of nutrients that ultimately influence the biotic distribution and trophic structure. For instance information on areas/timing of upwelling and vertical mixing obtained from this study will help predict locations/seasons of high primary production and ultimately fisheries productivity in Lake Victoria.

  16. Simulation of Lake Victoria Circulation Patterns Using the Regional Ocean Modeling System (ROMS.

    Directory of Open Access Journals (Sweden)

    Chrispine Nyamweya

    Full Text Available Lake Victoria provides important ecosystem services including transport, water for domestic and industrial uses and fisheries to about 33 million inhabitants in three East African countries. The lake plays an important role in modulating regional climate. Its thermodynamics and hydrodynamics are also influenced by prevailing climatic and weather conditions on diel, seasonal and annual scales. However, information on water temperature and circulation in the lake is limited in space and time. We use a Regional Oceanographic Model System (ROMS to simulate these processes from 1st January 2000 to 31st December 2014. The model is based on real bathymetry, river runoff and atmospheric forcing data using the bulk flux algorithm. Simulations show that the water column exhibits annual cycles of thermo-stratification (September-May and mixing (June-August. Surface water currents take different patterns ranging from a lake-wide northward flow to gyres that vary in size and number. An under flow exists that leads to the formation of upwelling and downwelling regions. Current velocities are highest at the center of the lake and on the western inshore waters indicating enhanced water circulation in those areas. However, there is little exchange of water between the major gulfs (especially Nyanza and the open lake, a factor that could be responsible for the different water quality reported in those regions. Findings of the present study enhance understanding of the physical processes (temperature and currents that have an effect on diel, seasonal, and annual variations in stratification, vertical mixing, inshore-offshore exchanges and fluxes of nutrients that ultimately influence the biotic distribution and trophic structure. For instance information on areas/timing of upwelling and vertical mixing obtained from this study will help predict locations/seasons of high primary production and ultimately fisheries productivity in Lake Victoria.

  17. Numerical Modeling of ROM Panel Closures at WIPP

    Science.gov (United States)

    Herrick, C. G.

    2016-12-01

    The Waste Isolation Pilot Plant (WIPP) in New Mexico is a U.S. DOE geologic repository for permanent disposal of defense-related transuranic (TRU) waste. Waste is emplaced in panels excavated in a bedded salt formation (Salado Fm.) at 655 m bgs. In 2014 the U.S. EPA approved the new Run-of-Mine Panel Closure System (ROMPCS) for WIPP. The closure system consists of 100 feet of run-of-mine (ROM) salt sandwiched between two barriers. Nuclear Waste Partnership LLC (the M&O contractor for WIPP) initiated construction of the ROMPCS. The design calls for three horizontal ROM salt layers at different compaction levels ranging from 70-85% intact salt density. Due to panel drift size constraints and equipment availability the design was modified. Three prototype panel closures were constructed: two having two layers of compacted ROM salt (one closure had 1% water added) and a third consisting of simply ROM salt with no layering or added water. Sampling of the prototype ROMPCS layers was conducted to determine the following ROM salt parameters: thickness, moisture content, emplaced density, and grain-size distribution. Previous modeling efforts were performed without knowledge of these ROM salt parameters. This modeling effort incorporates them. The program-accepted multimechanism deformation model is used to model intact salt room creep closure. An advanced crushed salt model is used to model the ROM salt. Comparison of the two models' results with the prototypes' behavior is given. Our goal is to develop a realistic, reliable model that can be used for ROM salt applications at WIPP. Sandia National Laboratories is a multi-program laboratory operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U. S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. This research is funded by WIPP programs administered by the Office of Environmental Management (EM) of the U.S Department of Energy SAND

  18. Introducing students to ocean modeling via a web-based implementation for the Regional Ocean Modeling System (ROMS) river plume case study

    Science.gov (United States)

    Harris, C. K.; Overeem, I.; Hutton, E.; Moriarty, J.; Wiberg, P.

    2016-12-01

    Numerical models are increasingly used for both research and applied sciences, and it is important that we train students to run models and analyze model data. This is especially true within oceanographic sciences, many of which use hydrodynamic models to address oceanographic transport problems. These models, however, often require a fair amount of training and computer skills before a student can run the models and analyze the large data sets produced by the models. One example is the Regional Ocean Modeling System (ROMS), an open source, three-dimensional primitive equation hydrodynamic ocean model that uses a structured curvilinear horizontal grid. It currently has thousands of users worldwide, and the full model includes modules for sediment transport and biogeochemistry, and several options for turbulence closures and numerical schemes. Implementing ROMS can be challenging to students, however, in part because the code was designed to provide flexibility for the choice of model parameterizations and processes, and to run on a variety of High Performance Computing (HPC) platforms. To provide a more accessible tool for classroom use, we have modified an existing idealized ROMS implementation to be run on a High Performance Computer (HPC) via the WMT (Web Modeling Toolkit), and developed a series of lesson plans that explore sediment transport within the idealized model domain. This has addressed our goal to provide a relatively easy introduction to the numerical modeling process that can be used within upper level undergraduate and graduate classes to explore sediment transport on continental shelves. The model implementation includes wave forcing, along-shelf currents, a riverine source, and suspended sediment transport. The model calculates suspended transport and deposition of sediment delivered to the continental shelf by a riverine flood. Lesson plans lead the students through running the model on a remote HPC, modifying the standard model. The lesson

  19. A Community Terrain-Following Ocean Modeling System (ROMS/TOMS)

    Science.gov (United States)

    2013-09-30

    derived from the adjoint of 4D-Var, Mon. Weather Rev., 140, 3183-3203. Zavala -Garay, J., J.L. Wilkin, and H.G. Arango, 2012: Predictability of...Edwards, K.W. Bruland, E. Di Lorenzo , C.V.W Lewis, T.M. Powell, E. Curchitser, and K. Hedstrom, 2009: Modeling iron limitation of primary production in...press (online early view). Haidvogel, D.B., H. Arango, W.P. Budgell, B.D. Cornuelle, E. Curchitser, E. Di Lorenzo , K. Fennel, W.R. Geyer, A.J. Hermann

  20. CAI System of Obunsha Co., Ltd. Using CD-ROM

    Science.gov (United States)

    Todokoro, Shigeru; Mukai, Yoshihiro

    This paper introduces the present status of R & D on CAI teaching materials in Obunsha Co., Ltd. Characteristics of CAI using CD-ROM as well as Culture-in CAI Teaching Materials System for junior high school English are described. The system consists of CD-ROM driver XM-2000 and Pasopia 700 of Toshiba Corporation having both features of CD-ROM and FD. CD-ROM stores vast amount of voice data while FD does text and graphics data. It is a frame-oriented mode system enabling to raise learning effect.

  1. Regionally coupled atmosphere-ocean-sea ice-marine biogeochemistry model ROM: 1. Description and validation

    Science.gov (United States)

    Sein, Dmitry V.; Mikolajewicz, Uwe; Gröger, Matthias; Fast, Irina; Cabos, William; Pinto, Joaquim G.; Hagemann, Stefan; Semmler, Tido; Izquierdo, Alfredo; Jacob, Daniela

    2015-03-01

    The general circulation models used to simulate global climate typically feature resolution too coarse to reproduce many smaller-scale processes, which are crucial to determining the regional responses to climate change. A novel approach to downscale climate change scenarios is presented which includes the interactions between the North Atlantic Ocean and the European shelves as well as their impact on the North Atlantic and European climate. The goal of this paper is to introduce the global ocean-regional atmosphere coupling concept and to show the potential benefits of this model system to simulate present-day climate. A global ocean-sea ice-marine biogeochemistry model (MPIOM/HAMOCC) with regionally high horizontal resolution is coupled to an atmospheric regional model (REMO) and global terrestrial hydrology model (HD) via the OASIS coupler. Moreover, results obtained with ROM using NCEP/NCAR reanalysis and ECHAM5/MPIOM CMIP3 historical simulations as boundary conditions are presented and discussed for the North Atlantic and North European region. The validation of all the model components, i.e., ocean, atmosphere, terrestrial hydrology, and ocean biogeochemistry is performed and discussed. The careful and detailed validation of ROM provides evidence that the proposed model system improves the simulation of many aspects of the regional climate, remarkably the ocean, even though some biases persist in other model components, thus leaving potential for future improvement. We conclude that ROM is a powerful tool to estimate possible impacts of climate change on the regional scale.

  2. Integrated CD-ROM and WORM Optical Disk Systems on the Navy's Paperless Ship.

    Science.gov (United States)

    Thiel, Thomas J.

    1992-01-01

    The integration of optical disk systems employing WORM (Write Once Read Many) technology with CD-ROM systems can enhance information management. Two integrated system applications are the Paperless Ship Project of the U.S. Navy and the FEDLOG (Federal Logistics Data on CD-ROM) of the Defense Logistics Agency. These initiatives are described and…

  3. Enhancing Your CD-ROM Services with Signage Systems.

    Science.gov (United States)

    Ekhaml, Leticia

    1994-01-01

    Describes how to use effective signage, or visual guidance, for more efficient use of CD-ROM technology in elementary and secondary school library media centers. Setting CD-ROM policies and procedures is considered; the use of posters, brochures, flowcharts, and other formats is discussed; and examples are included. (LRW)

  4. Open boundary conditions for tidally and subtidally forced circulation in a limited-area coastal model using the Regional Ocean Modeling System (ROMS)

    Science.gov (United States)

    Liu, Zhiqiang; Gan, Jianping

    2016-08-01

    In limited-area ocean models, open boundary conditions (OBCs) often create dynamic inconsistencies and perform poorly in resolving tidal or subtidal flow when both forces exist. Orlanski-type radiation OBCs are reasonably efficient at treating the subtidally forced flow, and Flather-type OBCs are commonly adapted for the tidally forced flow. However, neither of them performs well when tidal and subtidal forces simultaneously drive the flows. We have developed a novel OBC that integrates the active OBC in Gan and Allen (2005) and a Flather-type OBC. This new OBC accommodates the concurrent Tidal and Subtidal (TST) forcing, and the respective tidal or subtidal forcing, at the open boundary of a limited-area model. This new TST-OBC treats the tidal component with a Flather-type OBC, and it separates subtidal barotropic and baroclinic components into local (forced) and global (unforced) components. Then an unforced Orlanski-type OBC can be applied to the global part. We applied the TST-OBC to all model variables to reduce dynamic inconsistence. Using the Regional Ocean Modeling System, we applied the TST-OBC to the shallow East China Sea shelf where strong tidal and subtidal forces over complex topography govern the circulation. Our numerical experiments and analyses suggest that the TST-OBC was robust for both concurrent tidal-subtidal forcing and solely tidal or subtidal forcing at the open boundary. It reduced spurious energy reflection, and, overall, it performed better than an Orlanski-type or Flather-type OBC in reproducing realistic tidal and subtidal shelf circulation.

  5. Development and test of a model for designing interactive CD-ROMs for teaching nursing skills.

    Science.gov (United States)

    Jeffries, P R

    2000-01-01

    The use of interactive multimedia is well documented in the education literature as a medium for learning. Many schools of nursing and healthcare agencies purchase commercially-made CD-ROM products, and, in other cases, educators develop their own. Since nurses are increasingly designing CD-ROMs, they must be aware of the instructional design needed to develop comprehensive and effective CD-ROMs that do not compromise the quality of education. This article describes a process for developing and testing an interactive, multimedia CD-ROM on oral medication administration, using an instructional design model based on Chickering and Gamson's Principles of Good Practices in Education. Results from testing the model are reported. The findings can be used to guide the work of nurse educators who are interested in developing educational software.

  6. The Intelligent Reference Information System Project. A Merger of CD-ROM LAN and Expert System Technologies.

    Science.gov (United States)

    Bailey, Charles W., Jr.

    1992-01-01

    Describes the development of a prototype Intelligent Reference Information System (IRIS) at the University of Houston library which integrated a CD-ROM local area network (LAN) and expert system technologies. Evaluations of the CD-ROM LAN performance and user reactions are reported, and possible future developments are discussed. (13 references)…

  7. Comparing a quasi-3D to a full 3D nearshore circulation model: SHORECIRC and ROMS

    Science.gov (United States)

    Haas, K.A.; Warner, J.C.

    2009-01-01

    Predictions of nearshore and surf zone processes are important for determining coastal circulation, impacts of storms, navigation, and recreational safety. Numerical modeling of these systems facilitates advancements in our understanding of coastal changes and can provide predictive capabilities for resource managers. There exists many nearshore coastal circulation models, however they are mostly limited or typically only applied as depth integrated models. SHORECIRC is an established surf zone circulation model that is quasi-3D to allow the effect of the variability in the vertical structure of the currents while maintaining the computational advantage of a 2DH model. Here we compare SHORECIRC to ROMS, a fully 3D ocean circulation model which now includes a three dimensional formulation for the wave-driven flows. We compare the models with three different test applications for: (i) spectral waves approaching a plane beach with an oblique angle of incidence; (ii) monochromatic waves driving longshore currents in a laboratory basin; and (iii) monochromatic waves on a barred beach with rip channels in a laboratory basin. Results identify that the models are very similar for the depth integrated flows and qualitatively consistent for the vertically varying components. The differences are primarily the result of the vertically varying radiation stress utilized by ROMS and the utilization of long wave theory for the radiation stress formulation in vertical varying momentum balance by SHORECIRC. The quasi-3D model is faster, however the applicability of the fully 3D model allows it to extend over a broader range of processes, temporal, and spatial scales. ?? 2008 Elsevier Ltd.

  8. Modelling the Caspian Sea and its catchment area using a coupled regional atmosphere-ocean model (RegCM4-ROMS: model design and preliminary results

    Directory of Open Access Journals (Sweden)

    U. U. Turuncoglu

    2013-03-01

    Full Text Available We describe the development of a coupled regional atmosphere-ocean model (RegCM4-ROMS and its implementation over the Caspian Sea basin. The coupled model is run for the period 1999–2008 (after a spin up of 4 yr and it is compared to corresponding stand alone model simulations and a simulation in which a distributed 1d lake model is run for the Caspian Sea. All model versions show a good performance in reproducing the climatology of the Caspian Sea basin, with relatively minor differences across them. The coupled ROMS produces realistic, although somewhat overestimated, Caspian Sea Surface Temperature (SST, with a considerable improvement compared to the use of the simpler coupled lake model. Simulated near surface salinity and sea currents are also realistic, although the upwelling over the eastern coastal regions is underestimated. The sea ice extent over the shallow northern shelf of the Caspian Sea and its seasonal evolution are well reproduced, however, a significant negative bias in sea-ice fraction exists due to the relatively poor representation of the bathymetry. ROMS also calculates the Caspian Sea Level (CSL, showing that for the present experiment excessive evaporation over the lake area leads to a drift in estimated CSL. Despite this problem, which requires further analysis due to many uncertainties in the estimation of CSL, overall the coupled RegCM4-ROMS system shows encouraging results in reproducing both the climatology of the region and the basic characteristics of the Caspian Sea.

  9. Modeling the Caspian Sea and its catchment area using a coupled regional atmosphere-ocean model (RegCM-ROMS: model design and preliminary results

    Directory of Open Access Journals (Sweden)

    U. U. Turuncoglu

    2012-11-01

    Full Text Available We describe the development of a coupled regional atmosphere-ocean model (RegCM-ROMS and its implementation over the Caspian Sea basin. The coupled model is run for the period 1999–2008 (after a spin up of 4 yr and it is compared to corresponding stand alone model simulations and a simulation in which a distributed 1d lake model is run for the Caspian Sea. All model versions show a good performance in reproducing the climatology of the Caspian Sea basin, with relatively minor differences across them. The coupled ROMS produces realistic, although somewhat overestimated, lake surface temperatures (LSTs, with a considerable improvement compared to the use of the simpler coupled lake model. Simulated near surface salinity and sea currents are also realistic, although the upwelling over the eastern coastal regions is underestimated. The distribution of sea ice over the shallow northern shelf of the Caspian Sea and its seasonal evolution are well reproduced. ROMS also calculates the Caspian Sea Level (CSL, showing that for the present experiment excessive evaporation over the lake area leads to a drift in estimated CSL. Despite this problem which requires further analysis due to many uncertainties in the estimation of CSL, overall the coupled RegCM-ROMS system shows encouraging results in reproducing both the climatology of the region and the basic characteristics of the Caspian Sea.

  10. Hybrid finite-volume-ROM approach to non-linear aerospace fluid-structure interaction modelling

    CSIR Research Space (South Africa)

    Mowat, AGB

    2011-06-01

    Full Text Available frame, describe the fluid domain while the structure is represented by a quadratic modal reduced order model (ROM). A Runge-Kutta dual-timestepping method is employed for the fluid solver, and three upwind schemes are considered viz. AUSM+ -up, HLLC...

  11. Computational Vibroacoustics in Low- and Medium- Frequency Bands: Damping, ROM, and UQ Modeling

    Directory of Open Access Journals (Sweden)

    Roger Ohayon

    2017-06-01

    Full Text Available Within the framework of the state-of-the-art, this paper presents a summary of some common research works carried out by the authors concerning computational methods for the prediction of the responses in the frequency domain of general linear dissipative vibroacoustics (structural-acoustic systems for liquid and gas in the low-frequency (LF and medium-frequency (MF domains, including uncertainty quantification (UQ that plays an important role in the MF domain. The system under consideration consists of a deformable dissipative structure, coupled with an internal dissipative acoustic fluid including a wall acoustic impedance, and surrounded by an infinite acoustic fluid. The system is submitted to given internal and external acoustic sources and to prescribed mechanical forces. An efficient reduced-order computational model (ROM is constructed using a finite element discretization (FEM for the structure and the internal acoustic fluid. The external acoustic fluid is treated using a symmetric boundary element method (BEM in the frequency domain. All the required modeling aspects required for the analysis in the MF domain have been introduced, in particular the frequency-dependent damping phenomena and model uncertainties. An industrial application to a complex computational vibroacoustic model of an automobile is presented.

  12. Development and evaluation of a high-resolution reanalysis of the East Australian Current region using the Regional Ocean Modelling System (ROMS 3.4) and Incremental Strong-Constraint 4-Dimensional Variational (IS4D-Var) data assimilation

    Science.gov (United States)

    Kerry, Colette; Powell, Brian; Roughan, Moninya; Oke, Peter

    2016-10-01

    As with other Western Boundary Currents globally, the East Australian Current (EAC) is highly variable making it a challenge to model and predict. For the EAC region, we combine a high-resolution state-of-the-art numerical ocean model with a variety of traditional and newly available observations using an advanced variational data assimilation scheme. The numerical model is configured using the Regional Ocean Modelling System (ROMS 3.4) and takes boundary forcing from the BlueLink ReANalysis (BRAN3). For the data assimilation, we use an Incremental Strong-Constraint 4-Dimensional Variational (IS4D-Var) scheme, which uses the model dynamics to perturb the initial conditions, atmospheric forcing, and boundary conditions, such that the modelled ocean state better fits and is in balance with the observations. This paper describes the data assimilative model configuration that achieves a significant reduction of the difference between the modelled solution and the observations to give a dynamically consistent "best estimate" of the ocean state over a 2-year period. The reanalysis is shown to represent both assimilated and non-assimilated observations well. It achieves mean spatially averaged root mean squared (rms) residuals with the observations of 7.6 cm for sea surface height (SSH) and 0.4 °C for sea surface temperature (SST) over the assimilation period. The time-mean rms residual for subsurface temperature measured by Argo floats is a maximum of 0.9 °C between water depths of 100 and 300 m and smaller throughout the rest of the water column. Velocities at several offshore and continental shelf moorings are well represented in the reanalysis with complex correlations between 0.8 and 1 for all observations in the upper 500 m. Surface radial velocities from a high-frequency radar array are assimilated and the reanalysis provides surface velocity estimates with complex correlations with observed velocities of 0.8-1 across the radar footprint. A comparison with

  13. The ROMS IAS Data Assimilation And Prediction System: Quantifying Uncertainty

    Science.gov (United States)

    2009-09-30

    experience in applying sophisticated 4D-Var methods in mesoscale coastal circulation environments (Di Lorenzo et al., 2007; Haidvogel et al., 2008...Di Lorenzo , E., A.M. Moore, H.G. Arango, B.D. Cornuelle, A.J. Miller, B. Powell, B.S. Chua and A.F. Bennett, 2007: Weak and strong constraint data...adjoint system. Tellus, 56A, 189-201. Moore, A.M., H.G. Arango, G. Broquet, B.S. Powell, J. Zavala -Garay and A.T. Weaver, 2009a: The Regional Ocean

  14. An historical analysis of the California Current circulation using ROMS 4D-Var: System configuration and diagnostics

    Science.gov (United States)

    Neveu, Emilie; Moore, Andrew M.; Edwards, Christopher A.; Fiechter, Jérôme; Drake, Patrick; Crawford, William J.; Jacox, Michael G.; Nuss, Emma

    2016-03-01

    The Regional Ocean Modeling System (ROMS) 4-dimensional variational (4D-Var) data assimilation tool has been used to compute two sequences of circulation analyses for the U.S. west coast. One sequence of analyses spans the period 1980-2010 and is subject to surface forcing derived from relatively low resolution atmospheric products from the Cross-Calibrated Multi-Platform wind product (CCMP) and the European Centre for Medium Range Weather Forecasts (ECMWF) reanalysis project. The second sequence spans the shorter period 1999-2012 and is subject to forcing derived from a high resolution product from the Naval Research Laboratory Coupled Ocean Atmosphere Mesoscale Prediction System (COAMPS). The two analysis periods are divided into eight day windows, and all available satellite observations of sea surface temperature and sea surface height, as well as in situhydrographic profiles are assimilated into ROMS using 4D-Var. The performance of the system is monitored in terms of the cost function and the statistics of the innovations, and the impact of data assimilated on the circulation is assessed by comparing the posterior circulation estimates with the prior circulation and the circulation from a run of the model without data assimilation, with particular emphasis on eddy kinetic energy. This is part I of a two part series, and the circulation variability of the 4D-Var analyses will be documented in part II.

  15. Nonlinear Aerodynamic ROM-Structural ROM Methodology for Inflatable Aeroelasticity in Hypersonic Atmospheric Entry Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ZONA Technology proposes to develop an innovative nonlinear structural reduced order model (ROM) - nonlinear aerodynamic ROM methodology for the inflatable...

  16. Evaluation and application of the ROMS 1-way embedding procedure to the central california upwelling system

    Science.gov (United States)

    Penven, Pierrick; Debreu, Laurent; Marchesiello, Patrick; McWilliams, James C.

    What most clearly distinguishes near-shore and off-shore currents is their dominant spatial scale, O (1-30) km near-shore and O (30-1000) km off-shore. In practice, these phenomena are usually both measured and modeled with separate methods. In particular, it is infeasible for any regular computational grid to be large enough to simultaneously resolve well both types of currents. In order to obtain local solutions at high resolution while preserving the regional-scale circulation at an affordable computational cost, a 1-way grid embedding capability has been integrated into the Regional Oceanic Modeling System (ROMS). It takes advantage of the AGRIF (Adaptive Grid Refinement in Fortran) Fortran 90 package based on the use of pointers. After a first evaluation in a baroclinic vortex test case, the embedding procedure has been applied to a domain that covers the central upwelling region off California, around Monterey Bay, embedded in a domain that spans the continental U.S. Pacific Coast. Long-term simulations (10 years) have been conducted to obtain mean-seasonal statistical equilibria. The final solution shows few discontinuities at the parent-child domain boundary and a valid representation of the local upwelling structure, at a CPU cost only slightly greater than for the inner region alone. The solution is assessed by comparison with solutions for the whole US Pacific Coast at both low and high resolutions and to solutions for only the inner region at high resolution with mean-seasonal boundary conditions.

  17. Reduced Order Model Basis Vector Generation: Generates Basis Vectors fro ROMs

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-03

    libROM is a library that implements order reduction via singular value decomposition (SVD) of sampled state vectors. It implements 2 parallel, incremental SVD algorithms and one serial, non-incremental algorithm. It also provides a mechanism for adaptive sampling of basis vectors.

  18. Producing CD-ROMs.

    Science.gov (United States)

    Hyams, Peter, Ed.

    1992-01-01

    This issue presents 11 articles that address issues relating to the production of CD-ROMs. Highlights include current uses of CD-ROM; standards; steps involved in producing CD-ROMs, including data capture, conversion, and tagging, product design, and indexing; authoring; selecting indexing and retrieval software; costs; multimedia CD-ROMs; and…

  19. Development and Utilization of the Regional Oceanic Modeling System (ROMS)

    Science.gov (United States)

    2008-09-30

    Oceanography, 19, 46-59. Gruber, N., H. Frenzel , S.C. Doney, P. Marchesiello, J.C. McWilliams, J.R. Moisan, J. Oram, G.K. Plattner, and K.D...Phys. 227, 3429-3430, doi:10.1016/j.jcp.2007.01.016 Jin, X., N. Gruber, H. Frenzel , S.C. Doney, and J.C. McWilliams, 2008: The impact on

  20. New Development of CD-ROM Database Retrieval System%光盘数据库检索方式的新发展

    Institute of Scientific and Technical Information of China (English)

    郑燕华

    2000-01-01

    The main changes in the three commonly-used CD-ROM retrieval systems are introduced,including the enhancement of the window functions,the change of the field index function in SP software and the new saving and reusing functions of ProQuest for its retrieval strategies.

  1. CD-ROM-aided Databases

    Science.gov (United States)

    Nakaike, Shin'ichi; Tanaka, Masao

    The authors describe present status of patent information service by JAPIO, new on-line system project (PATOLIS-III), Paperless Project by the Patent Office and input of domestic gazettes for patent into optical disks. They also describe CD-ROM created by using image information of the gazettes for patent which is produced under the Paperless Project, its production method, and the terminals and their functions. Some problems found in CD-ROM of JAPIO, such as time lag for the issuance, treatment of the multiple copies, and countermeasures against them are mentioned.

  2. Developing Virtual CD-ROM Collections: The Voyager Company Publications

    Directory of Open Access Journals (Sweden)

    Geoffrey Brown

    2012-12-01

    Full Text Available Over the past 20 years, many thousands of CD-ROM titles were published; many of these have lasting cultural significance, yet present a difficult challenge for libraries due to obsolescence of the supporting software and hardware, and the consequent decline in the technical knowledge required to support them. The current trend appears to be one of abandonment – for example, the Indiana University Libraries no longer maintain machines capable of accessing early CD-ROM titles.In previous work, we proposed an access model based upon networked ‘virtual collections’ of CD-ROMs which can enable consortia of libraries to pool the technical expertise necessary to provide continued access to such materials for a geographically sparse base of patrons, who may have limited technical knowledge.In this paper, we extend this idea to CD-ROMs designed to operate on ‘classic’ Macintosh systems with an extensive case study – the catalog of the Voyager Company publications, which was the first major innovator in interactive CD-ROMs. The work described includes emulator extensions to support obsolete CD formats and to enable networked access to the virtual collection.

  3. Creating Virtual CD-ROM Collections

    Directory of Open Access Journals (Sweden)

    Kam Woods

    2009-10-01

    Full Text Available Over the past 20 years, more than 100,000 CD-ROM titles have been published including thousands of collections of government documents and data. CD-ROMs present preservation challenges at the bit level and in ensuring usability of the preserved artifact. We present techniques we have developed to archive and support user access to a collection of approximately 2,900 CD-ROMs published under the Federal Depository Library Program (FDLP by the United States Government Printing Office (GPO. The project provides web-based access to CD-ROM contents using both migration and emulation and supports remote execution of the raw CD-ROM images. Our project incorporates off-the-shelf, primarily open-source software. The raw data and (METS metadata are made available through AFS, a standard distributed file system, to encourage sharing among libraries.

  4. Rom II-forordningen

    DEFF Research Database (Denmark)

    Pii, Tine; Nielsen, Peter Arnt

    2008-01-01

    Artiklen redegør for de vigtigste regler i Europaparlamentets og Rådets forordning om lovvalgsregler for forpligtelser uden for kontraktforhold (Rom II) og sammenligner dem med dansk ret.......Artiklen redegør for de vigtigste regler i Europaparlamentets og Rådets forordning om lovvalgsregler for forpligtelser uden for kontraktforhold (Rom II) og sammenligner dem med dansk ret....

  5. Support-Vector-Machine-Based Reduced-Order Model for Limit Cycle Oscillation Prediction of Nonlinear Aeroelastic System

    Directory of Open Access Journals (Sweden)

    Gang Chen

    2012-01-01

    Full Text Available It is not easy for the system identification-based reduced-order model (ROM and even eigenmode based reduced-order model to predict the limit cycle oscillation generated by the nonlinear unsteady aerodynamics. Most of these traditional ROMs are sensitive to the flow parameter variation. In order to deal with this problem, a support vector machine- (SVM- based ROM was investigated and the general construction framework was proposed. The two-DOF aeroelastic system for the NACA 64A010 airfoil in transonic flow was then demonstrated for the new SVM-based ROM. The simulation results show that the new ROM can capture the LCO behavior of the nonlinear aeroelastic system with good accuracy and high efficiency. The robustness and computational efficiency of the SVM-based ROM would provide a promising tool for real-time flight simulation including nonlinear aeroelastic effects.

  6. Environmental Factor(tm) system: Superfund site information from five EPA databases (on cd-rom). Database

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    Environmental Factor puts today`s technology to work to provide a better, more cost-efficient and time-saving way to access EPA information on hazardous waste sites. Environmental consultants, insurers, and reinsurers, corporate risk assessors and companies actively involved in the generation, transport, storage or cleanup of hazardous waste materials can use its user-friendly information retrieval system to gain rapid access to vital information in immediately-usable form. Search, retrieve, and export information in real time. No more waiting for the mail or overnight delivery services to deliver hard copies of voluminous listings and individual site reports. More than 200,000 pages of EPA hazardous waste site information are contained in 5 related databases: (1) Site data from the National Priority List (NPL) and CERCLIS databases, Potentially Responsible Parties (PRP) and Records of Decision (RODs) summaries; (2) Complete PRP information; (3) EPA Records of Decision (Full Text); (4) entire Civil Enforcement Docket; and (5) Glossary of EPA terms, abbreviations and acronyms. Environmental Factor`s powerful database management engine gives even the most inexperienced computer user extensive search capabilities, including wildcard, phonetic and direct cross reference searches across multiple databases. The first menu option delivers information from the NPL, CERCLIS site data, PRP and RODs summary information. Enter a set of search criteria and then immediately access displays containing information from all of these databases. Get full PRP information and Full Text RODs by using their respective menu options. If your search turns up multiple items, a list of site names appears. To bring up the data, highlight the specific site you want and hit Enter. That`s how easy it is to access the vast amount of data stored in the Environmental Factor CD-ROM.

  7. Evaluation and application of the ROMS 1-way embedding procedure to the central california upwelling system

    OpenAIRE

    2006-01-01

    What most clearly distinguishes near-shore and off shore currents is their dominant spatial scale, O (1-30) km near-shore and O (30-1000) km off shore. In practice, these phenomena are usually both measured and modeled with separate methods. In particular, it is infeasible for any regular computational grid to be large enough to simultaneously resolve well both types of currents. In order to obtain local solutions at high resolution while preserving the regional-scale circulation at an afford...

  8. Interpolation-based reduced-order models to predict transient thermal output for enhanced geothermal systems

    CERN Document Server

    Mudunuru, M K; Harp, D R; Guthrie, G D; Viswanathan, H S

    2016-01-01

    The goal of this paper is to assess the utility of Reduced-Order Models (ROMs) developed from 3D physics-based models for predicting transient thermal power output for an enhanced geothermal reservoir while explicitly accounting for uncertainties in the subsurface system and site-specific details. Numerical simulations are performed based on Latin Hypercube Sampling (LHS) of model inputs drawn from uniform probability distributions. Key sensitive parameters are identified from these simulations, which are fracture zone permeability, well/skin factor, bottom hole pressure, and injection flow rate. The inputs for ROMs are based on these key sensitive parameters. The ROMs are then used to evaluate the influence of subsurface attributes on thermal power production curves. The resulting ROMs are compared with field-data and the detailed physics-based numerical simulations. We propose three different ROMs with different levels of model parsimony, each describing key and essential features of the power production cu...

  9. Modeling and simulation for RF system design

    CERN Document Server

    Frevert, Ronny; Jancke, Roland; Knöchel, Uwe; Schwarz, Peter; Kakerow, Ralf; Darianian, Mohsen

    2005-01-01

    Focusing on RF specific modeling and simulation methods, and system and circuit level descriptions, this work contains application-oriented training material. Accompanied by a CD- ROM, it combines the presentation of a mixed-signal design flow, an introduction into VHDL-AMS and Verilog-A, and the application of commercially available simulators.

  10. Regional Model Studies Nested in HYCOM. Application to the West Florida Shelf and the Cariaco Basin using ROMS

    Science.gov (United States)

    2007-09-30

    Marchesiello, P. (1995). Thermal forcing for global ocean circulation model using a 3-year climatology of ECMWF analyses. Journal of Marine Systems 6...R. (2007). The HYCOM (Hybrid Coordinate Ocean Model) Data Assimilative System. Journal of Marine Systems 65 (1-4), 60–83. Ducet, N., Le Traon, P

  11. Syd for Rom

    DEFF Research Database (Denmark)

    Frandsen, Steen Bo

    Bogen fortæller historien om et af Europas mest berømte vildnisser, De Pontinske Sumpe, der strakte sig i kystlandet umiddelbart syd for Rom fra romertiden til tørlægningen og forvandlingen til landbrugsland i 1930'erne. Allerede under romerne vandt sumpen uophørligt terræn og forvandlede det flade...... fascistiske regimes undergang forsøgte det med nye oversvømmelser at ødelægge sit symbolske landskab. Efter krigen blev landbruget genopbygget, men selv om det i en vis forstand blev Roms køkkenhave som leverandør til metropolens grøntsagsmarkeder, lå virkeligheden fjernt fra fascismens planlagte...... mønsterlandbrugsland. Byerne voksede, statssubventioneret industri vandt indpas og badeturismen erobrede strandene. I vore dage venter landskabet lige uden for Rom på at blive opdaget som et historisk landskab, rigt på spor fra fortiden og især fra det tyvende århundredes ofte oversete italienske historie....

  12. Serials Information on CD-ROM: A Reference Perspective.

    Science.gov (United States)

    Karch, Linda S.

    1990-01-01

    Describes Ulrich's PLUS (a CD-ROM version of Ulrich's serials directories) and EBSCO's CD-ROM version of "The Serials Directory," and compares the two in terms of their use as reference tools. Areas discussed include database content, user aids, system features, search features, and a comparison of search results. Equipment requirements for both…

  13. Serials Information on CD-ROM: A Reference Perspective.

    Science.gov (United States)

    Karch, Linda S.

    1990-01-01

    Describes Ulrich's PLUS (a CD-ROM version of Ulrich's serials directories) and EBSCO's CD-ROM version of "The Serials Directory," and compares the two in terms of their use as reference tools. Areas discussed include database content, user aids, system features, search features, and a comparison of search results. Equipment requirements…

  14. Small Area ROM Design for Embedded Applications

    Institute of Scientific and Technical Information of China (English)

    CUI Wei; WU Si-liang

    2007-01-01

    The compact full custom layout design of a 16 kbit mask-programmable compl ementary metal oxide semiconductor (CMOS) read only memory (ROM) with low power dissip ation is introduced. By optimizing storage cell size and peripheral circuit stru cture, the ROM has a small area of 0.050 mm2 with a power-delay product of 0.011 pJ/bit at +1.8 V. The high packing density and the excellent power-delay product have been achieved by using SMIC 0.18 μm 1P6M CMOS technology. A novel and simple sense amplifier/driver structure is presented which restores th e signal full swing efficiently and reduces the signal rising time by 2.4 ns , as well as the memory access time. The ROM has a fast access time of 8.6 n s. As a consequence, the layout design not only can be embedded into microprocessor system as its program memory, but also can be fabricated individually as ROM ASIC .

  15. Reduced Order Modeling for Prediction and Control of Large-Scale Systems.

    Energy Technology Data Exchange (ETDEWEB)

    Kalashnikova, Irina [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Computational Mathematics; Arunajatesan, Srinivasan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Aerosciences Dept.; Barone, Matthew Franklin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Aerosciences Dept.; van Bloemen Waanders, Bart Gustaaf [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Uncertainty Quantification and Optimization Dept.; Fike, Jeffrey A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Component Science and Mechanics Dept.

    2014-05-01

    This report describes work performed from June 2012 through May 2014 as a part of a Sandia Early Career Laboratory Directed Research and Development (LDRD) project led by the first author. The objective of the project is to investigate methods for building stable and efficient proper orthogonal decomposition (POD)/Galerkin reduced order models (ROMs): models derived from a sequence of high-fidelity simulations but having a much lower computational cost. Since they are, by construction, small and fast, ROMs can enable real-time simulations of complex systems for onthe- spot analysis, control and decision-making in the presence of uncertainty. Of particular interest to Sandia is the use of ROMs for the quantification of the compressible captive-carry environment, simulated for the design and qualification of nuclear weapons systems. It is an unfortunate reality that many ROM techniques are computationally intractable or lack an a priori stability guarantee for compressible flows. For this reason, this LDRD project focuses on the development of techniques for building provably stable projection-based ROMs. Model reduction approaches based on continuous as well as discrete projection are considered. In the first part of this report, an approach for building energy-stable Galerkin ROMs for linear hyperbolic or incompletely parabolic systems of partial differential equations (PDEs) using continuous projection is developed. The key idea is to apply a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. It is shown that, for many PDE systems including the linearized compressible Euler and linearized compressible Navier-Stokes equations, the desired transformation is induced by a special inner product, termed the “symmetry inner product”. Attention is then turned to nonlinear conservation laws. A new transformation and corresponding energy-based inner product for the full nonlinear compressible Navier

  16. A wetting and drying scheme for ROMS

    Science.gov (United States)

    Warner, John C.; Defne, Zafer; Haas, Kevin; Arango, Hernan G.

    2013-01-01

    The processes of wetting and drying have many important physical and biological impacts on shallow water systems. Inundation and dewatering effects on coastal mud flats and beaches occur on various time scales ranging from storm surge, periodic rise and fall of the tide, to infragravity wave motions. To correctly simulate these physical processes with a numerical model requires the capability of the computational cells to become inundated and dewatered. In this paper, we describe a method for wetting and drying based on an approach consistent with a cell-face blocking algorithm. The method allows water to always flow into any cell, but prevents outflow from a cell when the total depth in that cell is less than a user defined critical value. We describe the method, the implementation into the three-dimensional Regional Oceanographic Modeling System (ROMS), and exhibit the new capability under three scenarios: an analytical expression for shallow water flows, a dam break test case, and a realistic application to part of a wetland area along the Georgia Coast, USA.

  17. Arkitekturen, Roms moderne bygningsværker

    DEFF Research Database (Denmark)

    Hansen, Peter Mandal

    2012-01-01

    Artikel om Roms moderne og nutidige arkitektur med beskrivelse og analyse af et udvalg af Roms markante bygningsværker.......Artikel om Roms moderne og nutidige arkitektur med beskrivelse og analyse af et udvalg af Roms markante bygningsværker....

  18. Arkitekturen, Roms moderne bygningsværker

    DEFF Research Database (Denmark)

    Hansen, Peter Mandal

    2012-01-01

    Artikel om Roms moderne og nutidige arkitektur med beskrivelse og analyse af et udvalg af Roms markante bygningsværker.......Artikel om Roms moderne og nutidige arkitektur med beskrivelse og analyse af et udvalg af Roms markante bygningsværker....

  19. Biogeochemical validation of an interannual simulation of the ROMS-PISCES coupled model in the Southeast Pacific

    Directory of Open Access Journals (Sweden)

    Dante Espinoza-Morriberon

    2016-08-01

    Full Text Available Currently biogeochemical models are used to understand and quantify key biogeochemical processes in the ocean. The objective of the present study was to validate predictive ability of a regional configuration of the PISCES biogeochemical model on main biogeochemical variables in Humboldt Current Large Marine Ecosystem (HCLME. The statistical indicators used to evaluate the model were the bias, root-mean-square error, correlation coefficient and, graphically, the Taylor’s diagram. The results showed that the model reproduces the dynamics of the main biogeochemical variables (chlorophyll, dissolved oxygen and nutrients; in particular, the impact of El Niño 1997-1998 in the chlorophyll (decrease and oxygen minimum zone depth (increase. However, it is necessary to carry out sensitivity studies of the PISCES model with different key parameters values to obtain a more accurate representation of the properties of the Ocean.

  20. "Augenheilkunde" - Lern-CD-Rom [

    Directory of Open Access Journals (Sweden)

    Gruber, Anna

    2006-02-01

    Full Text Available [english] Problem: At present there is in general an essential improvement in the study of medicine (both in the acquisition of material as well as in examinations, including the subject "ophthalmology" in the 3rd oral examination. Method: Production of an "ophthalmology" learning CD-ROM with concomitant website within the framework of the Master of Medical Education (MME Study course in Bern, Switzerland. Results: As a result of continuing evaluation among students (since 10/2004, the enormous popularity of these additional, new teaching methods has been shown. Conclusion: A meaningful combination of the theoretical acquisition of the clinical images by means of books, lecture scripts, learning CD-ROM and the provision of material in the internet. Key terms: e-learning, students, internet, medical training. [german] Problemstellung: Es besteht derzeit eine allgemein notwendige Verbesserung des Medizinstudiums (sowohl im Erlernen des Stoffgebietes als auch bei der Prüfung, einschließlich Fach "Augenheilkunde" im 3. Rigorosum. Methode: Produktion einer "Augenheilkunde" -Lern-CD-ROM mit gleichzeitiger Website im Rahmen des Master of Medical Education (MME Studiums in Bern, Schweiz. Ergebnisse: Aufgrund laufender Evaluation unter den Studierenden (seit 10/2004 zeigt sich eine große Beliebtheit dieser zusätzlich neuen Lernmethoden. Schlussfolgerung: Es ergibt sich eine sinnvolle Kombination des theoretischen Erlernens der Krankheitsbilder mittels Bücher, Vorlesungsskripten, Lern-CD-ROM und Anbietung des Stoffes im Internet.

  1. Cern DD4424 ROM Diode Matrix

    CERN Multimedia

    A diode matrix is an extremely low-density form of read-only memory. It's one of the earliest forms of ROMs (dating back to the 1950s). Each bit in the ROM is represented by the presence or absence of one diode. The ROM is easily user-writable using a soldering iron and pair of wire cutters.This diode matrix board is a floppy disk boot ROM for a PDP-11, and consists of 32 16-bit words. When you access an address on the ROM, the circuit returns the represented data from that address.

  2. Delicacy, Imprecision, and Uncertainty of Oceanic Simulations: An Investigation with the Regional Oceanic Modeling System (ROMS)

    Science.gov (United States)

    2013-09-30

    Continental Shelf Research, 63, S193-S208, doi:10.1016/j.csr.2012.11.008. Gula . J., M. J. Molemaker, and J. C. McWilliams, 2013a: Mean dynamic balances...in the Gulf Stream in high-resolution numerical simulations, in preparation. Gula . J., M. J. Molemaker, and J. C. McWilliams, 2013b: Gulf Stream...dynamics and frontal eddies along the Southeast U.S. continental shelf, in preparation. Gula . J., M. J. Molemaker, and J. C. McWilliams, 2013c

  3. Submesoscale Flows and Mixing in the Ocean Surface Layer Using the Regional Oceanic Modeling System (ROMS)

    Science.gov (United States)

    2013-09-30

    2012.11.008. Gula . J., M. J. Molemaker, and J. C. McWilliams, 2013a: Mean dynamic balances in the Gulf Stream in high-resolution numerical...simulations, in preparation. Gula . J., M. J. Molemaker, and J. C. McWilliams, 2013b: Gulf Stream dynamics and frontal eddies along the Southeast U.S...continental shelf, in preparation. Gula . J., M. J. Molemaker, and J. C. McWilliams, 2013c: Submesoscale cold filaments in the Gulf Stream, in preparation

  4. Submesoscale Flows and Mixing in the Oceanic Surface Layer Using the Regional Oceanic Modeling System (ROMS)

    Science.gov (United States)

    2014-09-30

    a few days in duration, from intensification to instability to dissipation (Fig. 1). These results are reported in Gula et al.(2014). Frontal...published, refereed] Gula . J., M. J. Molemaker, and J. C. McWilliams, 2013a: Gulf Stream dynamics and frontal eddies along the Southeast U.S...continental shelf. J. Phys. Ocean. [submitted] Gula . J., M. J. Molemaker, and J. C. McWilliams, 2013b: Submesoscale cold filaments in the Gulf Stream. J

  5. ROM a primera vista = ROM at first sight

    Directory of Open Access Journals (Sweden)

    Hugo Ricardo, D

    2006-09-01

    Full Text Available RESUMEN Objetivo:Es por todos conocida la importancia en la medición delROM (Range of motion: Rango de movimiento de una articulación, como elemento diagnóstico y evolutivo, pero, falta de uniformidad existe respecto a como debería ser registrado el ROM, de manera tal que otros profesionales pudieran interpretar los mismos resultados. Es objetivo de este trabajo, presentar una nueva técnica, rápida y eficaz para medir el ROM activo de las articulaciones de muñeca y dedos, sin necesidad de recurrir a un goniómetro o sistema similar.Material y métodos: La técnica se basa en darle a cada rango articular, desde la posición extrema, un valor máximo de 1 y un mínimo de 0 . Por ejemplo, si la extensión de muñeca es total, entonces corresponde valor 1; si la extensión de muñeca, no existe, entonces corresponde un valor de 0. Si la extensión llega a un 25% , se considera valor¼. Si la extensión llega a un 50%, se considera valor ½ .Si la extensión llega a un 75%, se considera valor ¾. Además, si al valor del ROM obtenido, le adosamos luego de un guión el valor 0, indicaráausencia de dolor. Si adosamos el valor 1, indicará presencia de dolor.Discusión: Esta técnica tiene evidentemente ciertas ventajas respecto a los métodos convencionales: Es más rápida, más cómoda, más simple, más fácil de aprender y recordar, y otros profesionales pueden apropiadamente interpretar los mismos resultados ABSTRACTObjective: we all are aware of the importance of the measuring of ROM in an articulation, as an element for diagnosis and evolution. Notwithstanding, there is a lack of uniformity concerning its registration to facilitate theinterpretation of the same results by other professionals.So that, the aim of this work is presenting a new, quick and effective technique to measure the active ROM of wrist and fingers joints without resorting to a goniometer or similar device.Material and methods: this technique consists of giving each

  6. The Basic Economics of CD-ROM Pricing.

    Science.gov (United States)

    Erkkila, John E.

    1991-01-01

    This explanation of how the basic economic model of pricing applies to the CD-ROM industry considers the supply and demand sides of the market and compares three distinct pricing strategies: (1) pricing to maximize profits; (2) average cost pricing; and (3) marginal cost pricing. (EAM)

  7. Crocodile Mathematics 1.1. [CD-ROM].

    Science.gov (United States)

    2002

    This CD-ROM consists of software that allows both teachers and students to create and experiment with mathematical models by linking shapes, graphs, numbers, and equations. It is usable for demonstrations, home learning, reinforcing concepts, illustrating concepts that are difficult to visualize, further pupil investigations, and project work.…

  8. The Market Place: An Internal View of the Future of CD-ROM--The Perspective of the H. W. Wilson Company.

    Science.gov (United States)

    Miller, Frank W.; Loeding, Deborah Voigt

    1989-01-01

    Discussion of technological developments in library reference services focuses on contributions of the H. W. Wilson Company and highlights CD-ROM technology. Topics discussed include online access; menu-driven systems; CD-ROM hardware and software concerns; user response to CD-ROM; quality control of databases; pricing considerations; and future…

  9. A model-based insight into the coupling of nitrogen and sulfur cycles in a coastal upwelling system

    DEFF Research Database (Denmark)

    Muchamad, Al Azhar; Canfield, Donald Eugene; Fennel, Katja;

    2014-01-01

    detritus, to quantify the nitrogen and sulfur cycles in the Chilean OMZ. A new biogeochemical submodule was developed and coupled to the Regional Ocean Model System (ROMS). The model results generally agree with the observed distribution of reactive species and the measured process rates. Modeled...

  10. Simplified Predictive Models for CO2 Sequestration Performance Assessment: Research Topical Report on Task #4 - Reduced-Order Method (ROM) Based Models

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, Srikanta; Jin, Larry; He, Jincong; Durlofsky, Louis

    2015-06-30

    Reduced-order models provide a means for greatly accelerating the detailed simulations that will be required to manage CO2 storage operations. In this work, we investigate the use of one such method, POD-TPWL, which has previously been shown to be effective in oil reservoir simulation problems. This method combines trajectory piecewise linearization (TPWL), in which the solution to a new (test) problem is represented through a linearization around the solution to a previously-simulated (training) problem, with proper orthogonal decomposition (POD), which enables solution states to be expressed in terms of a relatively small number of parameters. We describe the application of POD-TPWL for CO2-water systems simulated using a compositional procedure. Stanford’s Automatic Differentiation-based General Purpose Research Simulator (AD-GPRS) performs the full-order training simulations and provides the output (derivative matrices and system states) required by the POD-TPWL method. A new POD-TPWL capability introduced in this work is the use of horizontal injection wells that operate under rate (rather than bottom-hole pressure) control. Simulation results are presented for CO2 injection into a synthetic aquifer and into a simplified model of the Mount Simon formation. Test cases involve the use of time-varying well controls that differ from those used in training runs. Results of reasonable accuracy are consistently achieved for relevant well quantities. Runtime speedups of around a factor of 370 relative to full- order AD-GPRS simulations are achieved, though the preprocessing needed for POD-TPWL model construction corresponds to the computational requirements for about 2.3 full-order simulation runs. A preliminary treatment for POD-TPWL modeling in which test cases differ from training runs in terms of geological parameters (rather than well controls) is also presented. Results in this case involve only small differences between

  11. Building the Portes ouvertes CD-ROM.

    Science.gov (United States)

    Jones, Christopher M.; Frommer, Judith

    1999-01-01

    Describes the development of the "Portes ouvertes" CD-ROM, which was produced as an integrated part of a first-year method for elementary French. Details the design and production of the CD-ROM with reference to video and textbook elements where such reference is indispensable to an understanding of pedagogical foundations. (Author/VWL)

  12. A numerical investigation of the Southern Gyre using ROMS

    Science.gov (United States)

    Gamoyo, Majambo; Reason, Chris J. C.; Collins, Charine

    2017-05-01

    A numerical model (The Regional Ocean Modelling System-ROMS), configured over the western Indian Ocean and driven by monthly climatology winds and heat fluxes, is applied to examine the Southern Gyre in the Somali Current system during the Southwest Monsoon. Despite the Southern Gyre playing a role in transporting water masses and other properties northwards across the equator, it has not been much studied. The model results indicate that the Southern Gyre appears in early June in the upper ocean as a result of instability in the northward flowing Somali Current. The arrival of downwelling Rossby wave energy at the East African coast intensifies the recirculation of the Southern Gyre and causes its northward movement. The Southern Gyre is characterized as a shallow feature which deepens from 100 m in June to 300 m in July-August. The average spatial scale of the gyre is about 400 km with subsequent development of positive vorticity bursts which are identified as potential contributors to the decay of the Southern Gyre. Cool and fresh waters observed in the gyre resulted from advection via the South Equatorial Current and then through the Somali Current (SC).

  13. IDC Reengineering Phase 2 & 3 Rough Order of Magnitude (ROM) Cost Estimate Summary (Leveraged NDC Case).

    Energy Technology Data Exchange (ETDEWEB)

    Harris, James M.; Prescott, Ryan; Dawson, Jericah M.; Huelskamp, Robert M.

    2014-11-01

    Sandia National Laboratories has prepared a ROM cost estimate for budgetary planning for the IDC Reengineering Phase 2 & 3 effort, based on leveraging a fully funded, Sandia executed NDC Modernization project. This report provides the ROM cost estimate and describes the methodology, assumptions, and cost model details used to create the ROM cost estimate. ROM Cost Estimate Disclaimer Contained herein is a Rough Order of Magnitude (ROM) cost estimate that has been provided to enable initial planning for this proposed project. This ROM cost estimate is submitted to facilitate informal discussions in relation to this project and is NOT intended to commit Sandia National Laboratories (Sandia) or its resources. Furthermore, as a Federally Funded Research and Development Center (FFRDC), Sandia must be compliant with the Anti-Deficiency Act and operate on a full-cost recovery basis. Therefore, while Sandia, in conjunction with the Sponsor, will use best judgment to execute work and to address the highest risks and most important issues in order to effectively manage within cost constraints, this ROM estimate and any subsequent approved cost estimates are on a 'full-cost recovery' basis. Thus, work can neither commence nor continue unless adequate funding has been accepted and certified by DOE.

  14. The Boreal Virtual Forest. [CD-ROM].

    Science.gov (United States)

    Indiana Univ.-Purdue Univ., Indianapolis.

    This CD-ROM is an educational CD-ROM aimed at classroom audiences in 5th grade and above. Using QuickTime Virtual Reality (QTVR), the Boreal Virtual Forest is designed so that students are able to see views from inside the central hardwood forest and look up or down or spin around 360 degrees. The program allows students to become familiar with…

  15. Hypertext markup language as an authoring tool for CD-ROM production.

    Science.gov (United States)

    Lynch, P J; Horton, S

    1998-01-01

    The Hypertext Markup Language (HTML) used to create Web pages is an attractive alternative to the proprietary authoring software that is now widely used to produce multimedia content for CD-ROMs. This paper describes the advantages and limitations of HTML as a non-proprietary and cross-platform CD-ROM authoring system, and the more general advantages of HTML as data standard for biocommunications content.

  16. Analysis of reactive oxygen metabolites (ROMs) after cardiovascular surgery as a marker of oxidative stress.

    Science.gov (United States)

    Kanaoka, Yuji; Inagaki, Ei-ichirou; Hamanaka, Souhei; Masaki, Hisao; Tanemoto, Kazuo

    2010-10-01

    The transient systemic low perfusion that occurs during cardiovascular surgery leads to oxidative stress and the production of free radicals. A systemic increase of various markers of oxidative stress has been shown to occur during cardiopulmonary bypass (CPB). However, these markers have not been adequately evaluated because they seem to be reactive and short-lived. Here, oxidative stress was measured using the free radical analytical system (FRAS 4) assessing the derivatives of reactive oxygen metabolites (d-ROMs) and biological antioxidant potential (BAP). Blood samples were taken from 21 patients undergoing elective cardiovascular surgery. CPB was used in 15 patients, and abdominal aortic aneurysm (AAA) surgery without CPB was performed in 6. Measurements of d-ROMs and BAP were taken before surgery, 1 day, 1 week, and 2 weeks after surgery, and oxidative stress was evaluated. The d-ROM level increased gradually after cardiovascular surgery up to 2 weeks. Over time, the d-ROM level after surgery involving CPB became higher than that after AAA surgery. This difference reached statistical significance at 1 week and lasted to 2 weeks. The prolongation of CPB was prone to elevate the d-ROM level whereas the duration of the aortic clamp in AAA surgery had no relation to the d-ROM level. The BAP was also elevated after surgery, and was positively correlated with the level of d-ROMs. In this study, patients who underwent cardiovascular surgery involving CPB had significant oxidative damage. The production of ROMs was shown to depend on the duration of CPB. Damage can be reduced if CPB is avoided. When CPB must be used, shortening the CPB time may be effective in reducing oxidative stress.

  17. Data on the environment. Accompanying brochure of the CD ROM; Daten zur Umwelt. Begleitbroschuere zur CD-ROM

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-15

    During the past 25 years, the Federal Environmental Office (UBA) has been publishing annual data on the environmental situation in Germany. This is the most recent publication; it contains data on climate protection, resources management, environment, health and quality of life, natural cycles and environmental media, and the economic importance of environmental protection. The CD-ROM contains data and facts on all of these subjects. It provides detailed and comprehensive information on the current condition of the environment in Germany, strategies and goals of environmental policy, books and other publications for further reading, and links. The CD-ROM also contains a system of key environmental indicators which illustrates successful activities and needs for action of environmental policy. Integrated internet access ensures access to current information on the internet. (orig.)

  18. Model Systems

    Directory of Open Access Journals (Sweden)

    Francisco Rodríguez-Trelles

    1998-12-01

    Full Text Available Current efforts to study the biological effects of global change have focused on ecological responses, particularly shifts in species ranges. Mostly ignored are microevolutionary changes. Genetic changes may be at least as important as ecological ones in determining species' responses. In addition, such changes may be a sensitive indicator of global changes that will provide different information than that provided by range shifts. We discuss potential candidate systems to use in such monitoring programs. Studies of Drosophila subobscura suggest that its chromosomal inversion polymorphisms are responding to global warming. Drosophila inversion polymorphisms can be useful indicators of the effects of climate change on populations and ecosystems. Other species also hold the potential to become important indicators of global change. Such studies might significantly influence ecosystem conservation policies and research priorities.

  19. ENERDATA CD-ROM Full data service

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The CD-ROM contains energy statistics for the years 1970 to 2000 for all countries of the world. It has detailed statistics on oil, gas electricity, coal and renewables. It give energy prices, capacities and reserves and macro-economic data, energy indicators and balances by sources, and country profiles. The data is available as sub-sets at various prices. The service is also available on the Internet. The CD-ROM can be purchased as a twice yearly, quarterly or monthly update.

  20. Understanding Childhood Cancer. [CD-ROM].

    Science.gov (United States)

    2001

    This interactive multimedia CD-ROM presentation is intended for the parents and families of children who have recently been diagnosed with cancer. It begins with an introduction by a pediatric oncologist. It features menus that include over 200 questions commonly asked about childhood cancer, with answers in a slide presentation format. Menus…

  1. Rationales for Challenged Books. [CD-ROM].

    Science.gov (United States)

    National Council of Teachers of English, Urbana, IL.

    This CD-ROM presents a collection of over 200 rationales for over 170 works (mainly novels but a few films) for use by teachers combating censorship. Some rationales on the disc are from published sources; others are student papers. Although the materials in the collection range from kindergarten through grade 12, the emphasis is on the middle…

  2. Pricing Strategies for CD-ROM Products.

    Science.gov (United States)

    Rowley, J. E.

    1994-01-01

    Pricing strategies for subscriptions and licenses for CD-ROMs are different for single users and networks. The basic components of pricing strategies are charges for subscription, connect line, display/print, telecommunication, session rate, special commands, and special services. Highlights selected supplier pricing strategies for single users…

  3. 經由校園網路存取圖書館光碟資料庫之研究 Studies on Multiuser Access Library CD-ROM Database via Campus Network

    Directory of Open Access Journals (Sweden)

    Ruey-shun Chen

    1992-06-01

    Full Text Available 無Library CD-ROM with its enormous storage, retrieval capabilities and reasonable price. It has been gradually replacing some of its printed counterpart. But one of the greatest limitation on the use of stand-alone CD-ROM workstation is that only one user can access the CD-ROM database at a time. This paper is proposed a new method to solve this problem. The method use personal computer via standard network system Ethernet high speed fiber network FADDY and standard protocol TCP/IP can access library CD-ROM database and perform a practical CD-ROM campus network system. Its advantage reduce redundant CD-ROM purchase fee and reduce damage by handed in and out and allows multiuser to access the same CD-ROM disc simultaneously.

  4. Parameterized reduced-order models using hyper-dual numbers.

    Energy Technology Data Exchange (ETDEWEB)

    Fike, Jeffrey A.; Brake, Matthew Robert

    2013-10-01

    The goal of most computational simulations is to accurately predict the behavior of a real, physical system. Accurate predictions often require very computationally expensive analyses and so reduced order models (ROMs) are commonly used. ROMs aim to reduce the computational cost of the simulations while still providing accurate results by including all of the salient physics of the real system in the ROM. However, real, physical systems often deviate from the idealized models used in simulations due to variations in manufacturing or other factors. One approach to this issue is to create a parameterized model in order to characterize the effect of perturbations from the nominal model on the behavior of the system. This report presents a methodology for developing parameterized ROMs, which is based on Craig-Bampton component mode synthesis and the use of hyper-dual numbers to calculate the derivatives necessary for the parameterization.

  5. 嵌入式系统的Flash ROM读写方法研究%Research on the Read-write of Flash ROM in Embedded System

    Institute of Scientific and Technical Information of China (English)

    杜文蛟

    2012-01-01

    This article proposed and confirmed a kind of method that read and write Flashrom of Lpc2136 in embedded system. It can be used to save important parameters. The transition procedure of the global variables between Ram and Flash is discussed in detail.%为提高微控制器的应用性能,以菲利普LPC2100系列微控制器为例,提出一种在嵌入式系统中读写LPC2136的Flash ROM方法,详细讨论全局变量在RAM和Flash之间的传送过程。

  6. Un posibil model de evaluare a durabilității exploatațiilor agricole din zona de nord vest a Românie

    Directory of Open Access Journals (Sweden)

    Ioan LAZĂR

    2007-12-01

    Full Text Available The article aims to identify those indicators that can be used for evaluating the sustainability of the Romanian agricultural uses. The three main domains: ecology, economy and sociology influence the development process of these indicators, which also relies upon the wellrecognized methods IDEA and IDERICA. Some of the assumptions used for constructing the sustainable development model of the Romanian agricultural uses are: the complex and competitive managerial techniques that foster ecological protection of the natural environment, as well as of the consumers, the flexibility, the size of the agricultural use that has to correspond to its specialization, the long term profitability and the economic efficiency.

  7. Making holograms: an educational CD-ROM

    Science.gov (United States)

    John, Pearl; Poche, Elaine J.

    2004-06-01

    The Columbia Career Center high school SPIE chapter has created an educational CD-ROM to teach holography to students on the threshold of a career path in Photonics. This paper examines the development of the CD-ROM as an educational project from the perspectives of both teacher and student. Holography has been used successfully in educational institutions as a motivational tool for students and a vehicle for the teaching of a wide variety of skills. These include problem solving, teamwork, safety, communication, research, mathematics, analysis of data, documentation, equipment handling, and knowledge of light theory, which involves the principals of reflection, refraction, diffraction, interference and polarization. All of these skills are essential to the photonics industry and, as a result, holography is considered by the Center for Occupational Research and Development (CORD)1 to be a national photonics skill standard for Laser Electro-optical Technicians (LEOTs). Thus, training in holography - using both simple and advanced techniques and equipment - prepares students for a variety of vocations involving laser technology. However, the teaching of holography can be beneficial at many different levels of education, including middle and high school students, college students and interested adults. The educational CD-ROM, "Making Holograms," is the first of its kind. It includes both simple, single beam holography using a laser pointer, and more advanced split-beam setups using helium neon lasers. This paper outlines both the benefits and challenges involved in the production of an educational CD-ROM on holography by high school students and their advisor in an SPIE high school chapter.

  8. Innledningsartikkel til temanummer om Barn og rom

    Directory of Open Access Journals (Sweden)

    Ellen Beate Sandseter

    2015-07-01

    Full Text Available I lys av utviklingen av barnehagens posisjon i det norske samfunnet og debatten om effekter av barnehagens fysiske miljø og organisering, dannet en gruppe tverrfaglige og tverrinstitusjonelle barnehageforskere i 2004 forskningsnettverket Barn og Rom. Nettverkets mål har vært å "skape ny og forskningsbasert kunnskap om det fysiske miljøets betydning for barn, og samtidig være et forum for kunnskapsdeling, utvikling av felles forskningsprosjekter, formidling og publisering, samt internasjonalt samarbeid med andre aktører og forskningsgrupper". Forskningsnettverket opererer med en definisjon av "Barn og Rom" som i vid forstand omfatter hele det fysiske miljøet barn vokser opp i. Dette inkluderer ulike landskap, for eksempel byen og naturen, steder, bygninger, ute- og innerom, innredning, møbler, utstyr, installasjoner og lekeapparater. Likevel har nettverket hatt et særlig fokus på barnehagens fysiske miljø og dets betydning for barn, personalet og den pedagogiske virksomheten og hvordan miljøet forstås, organiseres, skapes og endres av personalet og barn i barnehagen. Dette temanummeret er et resultat av noen av nettverksmedlemmenes arbeid de siste årene og presenterer en stor bredde både i metodisk tilnærming så vel som tematisk tilnærming til temaet "Barn og rom".

  9. Energy-Smart Choices for Schools. An HVAC Comparison Tool. [CD-ROM].

    Science.gov (United States)

    Geothermal Heat Pump Consortium, Inc., Washington, DC.

    A CD ROM program provides comparison construction cost capabilities for heating, ventilation, and air conditioning (HVAC) systems in educational facilities. The program combines multiple types of systems with square footage data on low and high construction cost and school size to automatically calculate HVAC comparative construction costs. (GR)

  10. Energy-Smart Choices for Schools. An HVAC Comparison Tool. [CD-ROM].

    Science.gov (United States)

    Geothermal Heat Pump Consortium, Inc., Washington, DC.

    A CD ROM program provides comparison construction cost capabilities for heating, ventilation, and air conditioning (HVAC) systems in educational facilities. The program combines multiple types of systems with square footage data on low and high construction cost and school size to automatically calculate HVAC comparative construction costs. (GR)

  11. Modeling and control of flow-induced vibrations of a flexible hydrofoil in viscous flow

    Science.gov (United States)

    Caverly, Ryan James; Li, Chenyang; Chae, Eun Jung; Forbes, James Richard; Young, Yin Lu

    2016-06-01

    In this paper, a reduced-order model (ROM) of the flow-induced vibrations of a flexible cantilevered hydrofoil is developed and used to design an active feedback controller. The ROM is developed using data from high-fidelity viscous fluid-structure interaction (FSI) simulations and includes nonlinear terms to accurately capture the effect of lock-in. An active linear quadratic Gaussian (LQG) controller is designed based on a linearization of the ROM and is implemented in simulation with the ROM and the high-fidelity viscous FSI model. A controller saturation method is also presented that ensures that the control force applied to the system remains within a prescribed range. Simulation results demonstrate that the LQG controller successfully suppresses vibrations in both the ROM and viscous FSI simulations using a reasonable amount of control force.

  12. Continuous system modeling

    Science.gov (United States)

    Cellier, Francois E.

    1991-01-01

    A comprehensive and systematic introduction is presented for the concepts associated with 'modeling', involving the transition from a physical system down to an abstract description of that system in the form of a set of differential and/or difference equations, and basing its treatment of modeling on the mathematics of dynamical systems. Attention is given to the principles of passive electrical circuit modeling, planar mechanical systems modeling, hierarchical modular modeling of continuous systems, and bond-graph modeling. Also discussed are modeling in equilibrium thermodynamics, population dynamics, and system dynamics, inductive reasoning, artificial neural networks, and automated model synthesis.

  13. Crocodile Technology. [CD-ROM].

    Science.gov (United States)

    2000

    This high school physics computer software resource is a systems and control simulator that covers the topics of electricity, electronics, mechanics, and programming. Circuits can easily be simulated on the screen and electronic and mechanical components can be combined. In addition to those provided in Crocodile Technology, a student can create…

  14. The CD-ROM experience at Loma Linda: the issues of training, logistics, and creative financing.

    Science.gov (United States)

    Abella, G V; Kittle, P W

    1992-01-01

    Since the end of 1987, the Medical Center and University libraries at Loma Linda have progressed from stand-alone CD-ROM-based workstations for access to MEDLINE to networked CD-ROM access to a variety of databases. T.O.M.M.I. (Total Online Medical Material Integration) is a CD-ROM-based wide area network linking the Loma Linda University Medical Center, Loma Linda University, and other entities in Loma Linda, California. T.O.M.M.I., a microcomputer-based system, represents the implementation of IAIMS at Loma Linda. In addition to discussing the issue of "downsizing" campus-wide information networks, this article focuses on the issues of training, handling of logistical problems, and the use of creative financing.

  15. Modeled water velocity, sea surface height, WATER TEMPERATURE, salinity, and others in the Caribbean Sea from 2007-01-01 to 2009-12-31 (NCEI Accession 0143929)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data was produced with the Regional Oceanic Modeling System (ROMS). The model resolved tides, and was forced by the North American Regional Reanalysis (NARR)...

  16. CD-ROM technology at the EROS data center

    Science.gov (United States)

    Madigan, Michael E.; Weinheimer, Mary C.

    1993-01-01

    The vast amount of digital spatial data often required by a single user has created a demand for media alternatives to 1/2" magnetic tape. One such medium that has been recently adopted at the U.S. Geological Survey's EROS Data Center is the compact disc (CD). CD's are a versatile, dynamic, and low-cost method for providing a variety of data on a single media device and are compatible with various computer platforms. CD drives are available for personal computers, UNIX workstations, and mainframe systems, either directly connected, or through a network. This medium furnishes a quick method of reproducing and distributing large amounts of data on a single CD. Several data sets are already available on CD's, including collections of historical Landsat multispectral scanner data and biweekly composites of Advanced Very High Resolution Radiometer data for the conterminous United States. The EROS Data Center intends to provide even more data sets on CD's. Plans include specific data sets on a customized disc to fulfill individual requests, and mass production of unique data sets for large-scale distribution. Requests for a single compact disc-read only memory (CD-ROM) containing a large volume of data either for archiving or for one-time distribution can be addressed with a CD-write once (CD-WO) unit. Mass production and large-scale distribution will require CD-ROM replication and mastering.

  17. Reduced order models for thermal analysis : final report : LDRD Project No. 137807.

    Energy Technology Data Exchange (ETDEWEB)

    Hogan, Roy E., Jr.; Gartling, David K.

    2010-09-01

    This LDRD Senior's Council Project is focused on the development, implementation and evaluation of Reduced Order Models (ROM) for application in the thermal analysis of complex engineering problems. Two basic approaches to developing a ROM for combined thermal conduction and enclosure radiation problems are considered. As a prerequisite to a ROM a fully coupled solution method for conduction/radiation models is required; a parallel implementation is explored for this class of problems. High-fidelity models of large, complex systems are now used routinely to verify design and performance. However, there are applications where the high-fidelity model is too large to be used repetitively in a design mode. One such application is the design of a control system that oversees the functioning of the complex, high-fidelity model. Examples include control systems for manufacturing processes such as brazing and annealing furnaces as well as control systems for the thermal management of optical systems. A reduced order model (ROM) seeks to reduce the number of degrees of freedom needed to represent the overall behavior of the large system without a significant loss in accuracy. The reduction in the number of degrees of freedom of the ROM leads to immediate increases in computational efficiency and allows many design parameters and perturbations to be quickly and effectively evaluated. Reduced order models are routinely used in solid mechanics where techniques such as modal analysis have reached a high state of refinement. Similar techniques have recently been applied in standard thermal conduction problems e.g. though the general use of ROM for heat transfer is not yet widespread. One major difficulty with the development of ROM for general thermal analysis is the need to include the very nonlinear effects of enclosure radiation in many applications. Many ROM methods have considered only linear or mildly nonlinear problems. In the present study a reduced order model is

  18. Oxidative stress, d-ROMs test, and ceruloplasmin.

    Science.gov (United States)

    Colombini, Francesco; Carratelli, Mauro; Alberti, Angelo

    2016-01-01

    Human serum samples were evaluated for oxidative stress with the d-ROMs test. The ceruloplasmin (CP) and copper contents of the samples was independently measured and compared to those calculated on the basis of the d-ROMs test results for pure CP solutions. The d-ROMs readings did not show any significant correlation with either the CP or copper contents of the samples. Critical interference of CP on the d-ROMs test was therefore excluded and the usefulness of the test in the evaluation of global oxidative status of a biological sample could be reassessed.

  19. Technology Applications Group Multimedia CD-ROM Project

    Science.gov (United States)

    McRacken, Kristi D.

    1995-01-01

    To produce a multimedia CD-ROM for the Technology Applications Group which would present the Technology Opportunity Showcase (TOPS) exhibits and Small Business Innovative Research (SBIR) projects to interested companies. The CD-ROM format is being used and developed especially for those companies who do not have Internet access, and cannot directly visit Langley through the World Wide Web. The CD-ROM will include text, pictures, sound, and movies. The information for the CD-ROM will be stored in a database from which the users can query and browse the information, and future CD's can be maintained and updated.

  20. Historisk roman fra det gamle Rom

    DEFF Research Database (Denmark)

    Kaarsted, Thomas

    2011-01-01

    Er historikere de bedst egnede til at skrive historiske romaner? Spørgsmålet er relevant i forbindelse med den på Fyn bosiddende Jo Hermann. Hun er fagperson per excellence, latin-og klassiskkyndig over en kam, og hendes " Kejserens klarsyn" om kejser Domitian, der i et længe opsparet anfald af r...... realpolitisk paranoia vil sin familie til livs, udspiller sig år 95-96 i det antikke Rom med alle de politiske og personlige intriger, man kan forestille sig....

  1. Methodology for determining rom size distribution

    OpenAIRE

    Silva, Christiane Ribeiro da; Souza, Vládia Cristina Gonçalves de; Koppe, Jair Carlos

    2014-01-01

    A metodologia para determinar a curva granulométrica de ROM foi desenvolvida em uma mina de ferro localizada no Brasil. O tamanho dos blocos maiores foi determinado a partir de fotografias, por meio das quais foi definida uma escala para analisar as dimensões dos blocos (comprimento e área). Isso foi implementado de acordo com um protocolo de amostragem específico, que envolve etapas de divisão e de homogeneização in situ de uma considerável quantidade de minério (cerca de 259 toneladas). Dur...

  2. Approximate Deconvolution Reduced Order Modeling

    CERN Document Server

    Xie, Xuping; Wang, Zhu; Iliescu, Traian

    2015-01-01

    This paper proposes a large eddy simulation reduced order model(LES-ROM) framework for the numerical simulation of realistic flows. In this LES-ROM framework, the proper orthogonal decomposition(POD) is used to define the ROM basis and a POD differential filter is used to define the large ROM structures. An approximate deconvolution(AD) approach is used to solve the ROM closure problem and develop a new AD-ROM. This AD-ROM is tested in the numerical simulation of the one-dimensional Burgers equation with a small diffusion coefficient(10^{-3})

  3. Catmull-Rom Curve Fitting and Interpolation Equations

    Science.gov (United States)

    Jerome, Lawrence

    2010-01-01

    Computer graphics and animation experts have been using the Catmull-Rom smooth curve interpolation equations since 1974, but the vector and matrix equations can be derived and simplified using basic algebra, resulting in a simple set of linear equations with constant coefficients. A variety of uses of Catmull-Rom interpolation are demonstrated,…

  4. NASA educational CD-ROMs: research and evaluation

    Science.gov (United States)

    Knudsen, R.

    2002-01-01

    Since the introduction of educational technology in the K-12 classroom, educators have been flooded with a seemingly endless flow of educational CD-ROMs. NASA has contributed to this new trend in educational technology by developing a wide range of some of the lastest, most high-tech CD-ROMs in the industry.

  5. Acquisition of CD-ROM Databases for Local Area Networks.

    Science.gov (United States)

    Davis, Trisha L.

    1993-01-01

    Discusses the acquisition of CD-ROM products for local area networks based on experiences at the Ohio State University libraries. Topics addressed include the historical development of CD-ROM acquisitions; database selection, including pricing and subscription options; the ordering process; and network licensing issues. (six references) (LRW)

  6. NASA educational CD-ROMs: research and evaluation

    Science.gov (United States)

    Knudsen, R.

    2002-01-01

    Since the introduction of educational technology in the K-12 classroom, educators have been flooded with a seemingly endless flow of educational CD-ROMs. NASA has contributed to this new trend in educational technology by developing a wide range of some of the lastest, most high-tech CD-ROMs in the industry.

  7. Catmull-Rom Curve Fitting and Interpolation Equations

    Science.gov (United States)

    Jerome, Lawrence

    2010-01-01

    Computer graphics and animation experts have been using the Catmull-Rom smooth curve interpolation equations since 1974, but the vector and matrix equations can be derived and simplified using basic algebra, resulting in a simple set of linear equations with constant coefficients. A variety of uses of Catmull-Rom interpolation are demonstrated,…

  8. Experiences of Dissemination of UNESCO Databases on CD-ROM.

    Science.gov (United States)

    Pelissier, Denise

    1996-01-01

    To increase availability of specialized databases and information services to national institutions, UNESCO (United Nations Educational, Scientific, and Cultural Organization) developed a CD-ROM prototype and mailed it to 267 sites in 80 countries. A follow-up questionnaire determined individual sites' CD-ROM holdings, other media offerings,…

  9. Modelling Railway Interlocking Systems

    DEFF Research Database (Denmark)

    Lindegaard, Morten Peter; Viuf, P.; Haxthausen, Anne Elisabeth

    2000-01-01

    In this report we present a model of interlocking systems, and describe how the model may be validated by simulation. Station topologies are modelled by graphs in which the nodes denote track segments, and the edges denote connectivity for train traÆc. Points and signals are modelled by annotatio...

  10. de Román Chalbaud

    Directory of Open Access Journals (Sweden)

    Irida García de Molero

    2005-01-01

    Full Text Available Esta investigación muestra cómo el autor cinematográfico construye el texto/discurso fílmico como objeto cultural, en un proceso mediador interpretante, en el cual crea por operaciones, bien de apropiación o de transgresión, su propia retórica gramatical. Tiene como objetivo establecer las huellas de la retórica gramatical en el conjunto de materia significante filmográfico del cineasta venezolano Román Chalbaud. El método utilizado es el semiótico, soportado por los fundamentos teóricometodológicos de las semióticas de la producción significante (Bettetini, 1977; 1984; 1996, de la cultura y el texto (Lotman, 1996; 1998; 1999; 2000 y semiosis social (Verón, 1996. Se analiza un corpus de ocho filmes: Caín adolescente (1959, Cuentos para mayores (1963, La quema de Judas (1974, Sagrado y obsceno (1976, El pez que fuma (1977, El rebaño de los ángeles (1979, La oveja negra (1987 y Pandemónium (1997.Comoconclusión general se infiere que la retórica gramatical del cine de Román Chalbaud está inscrita en las materias significantes de su filmografía, en un sistema institucional propio, que privilegia el género cinematográfico de ficción/crónica.

  11. FPGA Based Low Power ROM Design Using Capacitance Scaling

    DEFF Research Database (Denmark)

    Bansal, Meenakshi; Bansal, Neha; Saini, Rishita

    2015-01-01

    An ideal capacitor will not dissipate any power, but a real capacitor wil l have some power dissipation. In this work, we are going to design capacitance scaling based low power ROM design. In order to test the compatibility of this ROM design with latest i7 Processor, we are operating this ROM w...... in I/O Power, saving of 0.2% occur in Leakage Power, there will be a saving of 11.54% occur in Total Power. This design is implemented on Virtex-5 FPGA using Xilinx ISE and Verilog....

  12. Regularized Reduced Order Models

    CERN Document Server

    Wells, David; Xie, Xuping; Iliescu, Traian

    2015-01-01

    This paper puts forth a regularization approach for the stabilization of proper orthogonal decomposition (POD) reduced order models (ROMs) for the numerical simulation of realistic flows. Two regularized ROMs (Reg-ROMs) are proposed: the Leray ROM (L-ROM) and the evolve-then-filter ROM (EF-ROM). These new Reg-ROMs use spatial filtering to smooth (regularize) various terms in the ROMs. Two spatial filters are used: a POD projection onto a POD subspace (Proj) and a new POD differential filter (DF). The four Reg-ROM/filter combinations are tested in the numerical simulation of the one-dimensional Burgers equation with a small diffusion coefficient and the three-dimensional flow past a circular cylinder at a low Reynolds number (Re = 100). Overall, the most accurate Reg-ROM/filter combination is EF-ROM-DF. Furthermore, the DF generally yields better results than Proj. Finally, the four Reg-ROM/filter combinations are computationally efficient and generally more accurate than the standard Galerkin ROM.

  13. Selected System Models

    Science.gov (United States)

    Schmidt-Eisenlohr, F.; Puñal, O.; Klagges, K.; Kirsche, M.

    Apart from the general issue of modeling the channel, the PHY and the MAC of wireless networks, there are specific modeling assumptions that are considered for different systems. In this chapter we consider three specific wireless standards and highlight modeling options for them. These are IEEE 802.11 (as example for wireless local area networks), IEEE 802.16 (as example for wireless metropolitan networks) and IEEE 802.15 (as example for body area networks). Each section on these three systems discusses also at the end a set of model implementations that are available today.

  14. CD-ROM for teaching astronomy at school

    Science.gov (United States)

    Frede, V.; Balanca, C.

    Paris observatory and Toulouse institute of teachers' training (IUFM) have decided to develop multimedia supports for astronomy lessons. The goal of this project is to provide additional didactical material as CD-ROMs to elementary and high school teachers, to be used by children in classroom. In order to develop and improve the CD-ROMs, we are interested in two points : i) Measuring the use of the CD-ROM in term of acceptability and utilisability. ii) Measuring the impact of multimedia material on the understanding of children. Indeed several studies show that children have difficulties to learn astronomical concepts from standard teaching based on textbook. We want to see if their understanding improves when using those CD-ROM. This project is a part of "Astronomie sur Mesure", a broader project hold by Paris Observatory, showing the will to imply astronomers into pedagogical material productions.

  15. Programmable Nonlinear ADC Using Optimal-Sized ROM

    OpenAIRE

    K Dinesh; Anvekar, *; Sonde, BE

    1991-01-01

    A new programmable successive approximation ADC useful for realizing nonlinear transfer characteristics often required in instrumentation and communications is presented. This nonlinear ADC (NADC) requires a much smaller sized ROM than an NADC reported earlier

  16. A proposed Fast algorithm to construct the system matrices for a reduced-order groundwater model

    Science.gov (United States)

    Ushijima, Timothy T.; Yeh, William W.-G.

    2017-04-01

    Past research has demonstrated that a reduced-order model (ROM) can be two-to-three orders of magnitude smaller than the original model and run considerably faster with acceptable error. A standard method to construct the system matrices for a ROM is Proper Orthogonal Decomposition (POD), which projects the system matrices from the full model space onto a subspace whose range spans the full model space but has a much smaller dimension than the full model space. This projection can be prohibitively expensive to compute if it must be done repeatedly, as with a Monte Carlo simulation. We propose a Fast Algorithm to reduce the computational burden of constructing the system matrices for a parameterized, reduced-order groundwater model (i.e. one whose parameters are represented by zones or interpolation functions). The proposed algorithm decomposes the expensive system matrix projection into a set of simple scalar-matrix multiplications. This allows the algorithm to efficiently construct the system matrices of a POD reduced-order model at a significantly reduced computational cost compared with the standard projection-based method. The developed algorithm is applied to three test cases for demonstration purposes. The first test case is a small, two-dimensional, zoned-parameter, finite-difference model; the second test case is a small, two-dimensional, interpolated-parameter, finite-difference model; and the third test case is a realistically-scaled, two-dimensional, zoned-parameter, finite-element model. In each case, the algorithm is able to accurately and efficiently construct the system matrices of the reduced-order model.

  17. Modeling cellular systems

    CERN Document Server

    Matthäus, Franziska; Pahle, Jürgen

    2017-01-01

    This contributed volume comprises research articles and reviews on topics connected to the mathematical modeling of cellular systems. These contributions cover signaling pathways, stochastic effects, cell motility and mechanics, pattern formation processes, as well as multi-scale approaches. All authors attended the workshop on "Modeling Cellular Systems" which took place in Heidelberg in October 2014. The target audience primarily comprises researchers and experts in the field, but the book may also be beneficial for graduate students.

  18. Multiscale Cloud System Modeling

    Science.gov (United States)

    Tao, Wei-Kuo; Moncrieff, Mitchell W.

    2009-01-01

    The central theme of this paper is to describe how cloud system resolving models (CRMs) of grid spacing approximately 1 km have been applied to various important problems in atmospheric science across a wide range of spatial and temporal scales and how these applications relate to other modeling approaches. A long-standing problem concerns the representation of organized precipitating convective cloud systems in weather and climate models. Since CRMs resolve the mesoscale to large scales of motion (i.e., 10 km to global) they explicitly address the cloud system problem. By explicitly representing organized convection, CRMs bypass restrictive assumptions associated with convective parameterization such as the scale gap between cumulus and large-scale motion. Dynamical models provide insight into the physical mechanisms involved with scale interaction and convective organization. Multiscale CRMs simulate convective cloud systems in computational domains up to global and have been applied in place of contemporary convective parameterizations in global models. Multiscale CRMs pose a new challenge for model validation, which is met in an integrated approach involving CRMs, operational prediction systems, observational measurements, and dynamical models in a new international project: the Year of Tropical Convection, which has an emphasis on organized tropical convection and its global effects.

  19. Dynamic Systems Modeling

    Directory of Open Access Journals (Sweden)

    Sorin Dan ŞANDOR

    2003-01-01

    Full Text Available System Dynamics was introduced by Jay W. Forrester in the 1960s. Since then the methodology was adopted in many areas of natural or social sciences. This article tries to present briefly how this methodology works, both as Systems Thinking and as Modelling with Vensim computer software.

  20. Multi-Fidelity Framework for Modeling Combustion Instability

    Science.gov (United States)

    2016-07-27

    by integrating a reduced- order model (ROM) for combustion response into the linearized Euler equations. The ROM is developed from CFD simulations...distinguishable instability behaviors. The coupling between the ROM and the Euler equations requires two-way information transfer between the two...established by integrating a reduced-order model (ROM) for combustion response into the linearized Euler equations. The ROM is developed from CFD

  1. Modeling Sustainable Food Systems

    Science.gov (United States)

    Allen, Thomas; Prosperi, Paolo

    2016-05-01

    The processes underlying environmental, economic, and social unsustainability derive in part from the food system. Building sustainable food systems has become a predominating endeavor aiming to redirect our food systems and policies towards better-adjusted goals and improved societal welfare. Food systems are complex social-ecological systems involving multiple interactions between human and natural components. Policy needs to encourage public perception of humanity and nature as interdependent and interacting. The systemic nature of these interdependencies and interactions calls for systems approaches and integrated assessment tools. Identifying and modeling the intrinsic properties of the food system that will ensure its essential outcomes are maintained or enhanced over time and across generations, will help organizations and governmental institutions to track progress towards sustainability, and set policies that encourage positive transformations. This paper proposes a conceptual model that articulates crucial vulnerability and resilience factors to global environmental and socio-economic changes, postulating specific food and nutrition security issues as priority outcomes of food systems. By acknowledging the systemic nature of sustainability, this approach allows consideration of causal factor dynamics. In a stepwise approach, a logical application is schematized for three Mediterranean countries, namely Spain, France, and Italy.

  2. High performance algorithms in the Sparse Matrix Operator Kernel Emissions (SMOKE) modeling system

    Energy Technology Data Exchange (ETDEWEB)

    Coats, C.J. Jr. [MCNC Environmental Programs, Research Triangle Park, NC (United States)

    1996-12-31

    As part of MCNC`s Environmental Decision Support System (EDSS) project, the author has constructed the area-source and point source (exclusive of plume rise) emissions model components of a new emissions model--the Sparse Matrix Operator Kernel Emissions (SMOKE) Modeling System using the new paradigm. As of this August 1995 writing, the author is working on a generalized-vertical-coordinate formulation of plume rise (so that the model can be used for multiple AQMs--UAM, ROM, RADM, RAMS, and his own EDSS AQMs), and plan to start work soon on the mobile and biogenic emissions components. The initial prototype takes the same input files as EPS, but has extensions such as time zone support for each source to support regional modeling. For each category of emissions, SMOKE splits into specific components.

  3. Modeling Complex Systems

    CERN Document Server

    Boccara, Nino

    2010-01-01

    Modeling Complex Systems, 2nd Edition, explores the process of modeling complex systems, providing examples from such diverse fields as ecology, epidemiology, sociology, seismology, and economics. It illustrates how models of complex systems are built and provides indispensable mathematical tools for studying their dynamics. This vital introductory text is useful for advanced undergraduate students in various scientific disciplines, and serves as an important reference book for graduate students and young researchers. This enhanced second edition includes: . -recent research results and bibliographic references -extra footnotes which provide biographical information on cited scientists who have made significant contributions to the field -new and improved worked-out examples to aid a student’s comprehension of the content -exercises to challenge the reader and complement the material Nino Boccara is also the author of Essentials of Mathematica: With Applications to Mathematics and Physics (Springer, 2007).

  4. Distributed generation systems model

    Energy Technology Data Exchange (ETDEWEB)

    Barklund, C.R.

    1994-12-31

    A slide presentation is given on a distributed generation systems model developed at the Idaho National Engineering Laboratory, and its application to a situation within the Idaho Power Company`s service territory. The objectives of the work were to develop a screening model for distributed generation alternatives, to develop a better understanding of distributed generation as a utility resource, and to further INEL`s understanding of utility concerns in implementing technological change.

  5. Modeling the earth system

    Energy Technology Data Exchange (ETDEWEB)

    Ojima, D. [ed.

    1992-12-31

    The 1990 Global Change Institute (GCI) on Earth System Modeling is the third of a series organized by the Office for Interdisciplinary Earth Studies to look in depth at particular issues critical to developing a better understanding of the earth system. The 1990 GCI on Earth System Modeling was organized around three themes: defining critical gaps in the knowledge of the earth system, developing simplified working models, and validating comprehensive system models. This book is divided into three sections that reflect these themes. Each section begins with a set of background papers offering a brief tutorial on the subject, followed by working group reports developed during the institute. These reports summarize the joint ideas and recommendations of the participants and bring to bear the interdisciplinary perspective that imbued the institute. Since the conclusion of the 1990 Global Change Institute, research programs, nationally and internationally, have moved forward to implement a number of the recommendations made at the institute, and many of the participants have maintained collegial interactions to develop research projects addressing the needs identified during the two weeks in Snowmass.

  6. Hypermedia in the classroom using Earth and space science CD-ROMs.

    Science.gov (United States)

    Adams, P. E.

    The production of hypermedia CD-ROMs has greatly increased during the last five years. Many of these CD-ROMs have applications for use in the K-16 classroom. CD-ROMs have the potential to enhance student learning, motivation and metacognition. CD-ROMs can also help facilitate constructivist-based learning strategies. Commercial vendors (such as Marius Multimedia Ltd. and Expert Software) and US Government agencies (such as NASA and the US Geological Survey) are two possible sources for hypermedia CD-ROMs that are designed for the classroom. Five such CD-ROMs (Welcome to the Planets; GeoMedia 2-Interactive Multimedia CD-ROM on Global Environmental Change; The Mars Educational Multimedia CD-ROM; Redshift Multimedia Astronomy; and Expert Astronomer CD-ROM for Windows), and ideas for their use in the classroom, are discussed in this article.

  7. Explaining School Science in Book and CD-ROM Formats: Using Semiotic Analyses To Compare the Textual Construction of Knowledge.

    Science.gov (United States)

    Unsworth, Len

    1999-01-01

    Discussion of how the nature and use of visual and verbal meaning-making systems vary across formats. Focuses on a comparative study of CD-ROMs and printed books dealing with scientific concepts in upper primary grades. Topics include linguistic and visual semiosis; the use of images; and meanings in images. (Author/LRW)

  8. Modelling shelf-ocean exchange and its biogeochemical consequences in coastal upwelling systems

    DEFF Research Database (Denmark)

    Muchamad, Al Azhar

    reactions and biological respiration of marine organic matter (remineralization) under oxic and anoxic conditions. The developed model was coupled into a three-dimensional physical circulation model called the Regional Ocean Modeling System (ROMS). Then, the coupled model was employed and calibrated...... to relatively wide shelf areas because more sinking organic matter reach the shelf sea-floor and remineralize there, enhancing the nutrient trapping effect of the shelf circulation system. These results highlight the important role of the continental shelf bathymetry in modulating the shelf–ocean exchange......The biogeochemical cycles of organic carbon, nutrients, oxygen, and sulfur in the oceans have been suggested to dominantly occur across the shelf–ocean transition over the continental margin, although this zone represents only a small percentage of the global ocean area. Coastal upwelling zones...

  9. Scrisul epistolar românesc: o perspectivă cultural-retorică (II

    Directory of Open Access Journals (Sweden)

    Gabriela-Iuliana Morcov

    2016-08-01

    Full Text Available Articolul se concentrează asupra particularităților ce definesc scrisul epistolar românesc în perioada sa de formare și de consolidare. Analiza structurii și trăsăturilor stilistice ale textului epistolar are în vedere compoziția vechilor documente românești, în conformitate cu standardele impuse de formularul creat după model slavon, dar și raportarea textelor vechi la doctrina celor trei ipostaze ale elocuției – stilul simplu, stilul moderat și stilul înalt. Descrierea vechiului stil epistolar românesc este întregită prin propunerea unei clasificări funcționale a documentelor pe baza modelului comunicativ dezvoltat de Roman Jakobson (1964; într-un cadru delimitat de cei șase factori ai comunicării, scrierile epistolare sînt organizate în diferite categorii, în funcție de aparteneța socio-culturală a emițătorului și de competența comunicativă a acestuia și, respectiv, a receptorului, precum și în funcție de raportarea mesajului epistolar la context, la codul lingvistic utilizat și la specificul canalului comunicativ.

  10. NASA space and Earth science data on CD-ROM

    Science.gov (United States)

    Towheed, Syed S.

    1993-01-01

    The National Space Science Data Center (NSSDC) is very interested in facilitating the widest possible use of the scientific data acquired through NASA spaceflight missions. Therefore, NSSDC has participated with projects and data management elements throughout the NASA science environment in the creation, archiving, and dissemination of data using Compact Disk-Read Only Memory (CD-ROM). This CD-ROM technology has the potential to enable the dissemination of very large data volumes at very low prices to a great many researchers, students and their teachers, and others. This catalog identifies and describes the scientific CD-ROM's now available from NSSDC including the following data sets: Einstein Observatory CD-ROM, Galileo Cruise Imaging on CD-ROM, International Halley Watch, IRAS Sky Survey Atlas, Infrared Thermal Mapper (IRTM), Magellan (MIDR), Magellan (ARCDR's), Magellan (GxDR's), Mars Digital Image Map (MDIM), Outer Planets Fields & Particles Data, Pre-Magellan, Selected Astronomical Catalogs, TOMS Gridded Ozone Data, TOMS Ozone Image Data, TOMS Update, Viking Orbiter Images of Mars, and Voyager Image.

  11. Public census data on CD-ROM at Lawrence Berkeley Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, D.W.

    1993-01-16

    The Comprehensive Epidemiologic Data Resource (CEDR) and Populations at Risk to Environmental Pollution (PAREP) projects, of the Information and Computing Sciences Division (ICSD) at Lawrence Berkeley Laboratory (LBL), are using public socioeconomic and geographic data files which are available to CEDR and PAREP collaborators via LBL's computing network. At this time 72 CD-ROM diskettes (approximately 37 gigabytes) are on line via the Unix file server cedrcd.lbl.gov''. Most of the files are from the US Bureau of the Census, and many of these pertain to the 1990 Census of Population and Housing. All the CD-ROM diskettes contain documentation in the form of ASCII text files. In addition, printed documentation for most files is available for inspection at University of California Data and Technical Assistance (UC DATA), tel. (510) 642-6571, or the UC Documents Library, tel. (510) 642-2569, both located on the UC Berkeley Campus. Many of the CD-ROM diskettes distributed by the Census Bureau contain software for PC compatible computers, for easily accessing the data. Shared access to the data is maintained through a collaboration among the CEDR and PAREP projects at LBL, and UC DATA, and the UC Documents Library. LBL is grateful to UC DATA and the UC Documents Library for the use of their CD-ROM diskettes. Shared access to LBL facilities may be restricted in the future if costs become prohibitive. Via the Sun Network File System (NFS), these data can be exported to Internet computers for direct access by the user's application program(s). Due to the size of the files, this access method is preferred over File Transfer Protocol (FTP) access. Please contact Deane Merrill (dwmerrill lbl.gov) if you wish to make use of the data.

  12. Public census data on CD-ROM at Lawrence Berkeley Laboratory. Revision 4

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, D.W.

    1993-03-12

    The Comprehensive Epidemiologic Data Resource (CEDR) and Populations at Risk to Environmental Pollution (PAREP) projects, of the Information and Computing sciences Division (ICSD) at Lawrence Berkeley Laboratory (LBL), are using public socioeconomic and geographic data files which are available to CEDR and PAREP collaborators via LBL`s computing network. At this time 89 CD-ROM diskettes (approximately 45 gigabytes) are on line via the Unix file server cedrcd.lbl.gov. Most of the files are from the US Bureau of the Census, and many of these pertain to the 1990 Census of Population and Housing. All the CD-ROM diskettes contain documentation in the form of ASCII text files. In addition, printed documentation for most files is available for inspection at University of California Data and Technical Assistance (UC DATA), tel. (510) 642-6571, or the UC Documents Library, tel. (510) 642-2569, both located on the UC Berkeley Campus. Many of the CD-ROM diskettes distributed by the Census Bureau contain software for PC compatible computers, for easily accessing the data. Shared access to the data is maintained through a collaboration among the CEDR and PAREP projects at LBL, and UC DATA, and the UC Documents Library. LBL is grateful to UC DATA and the UC Documents Library for the use of their CD-ROM diskettes. Shared access to LBL facilities may be restricted in the future if costs become prohibitive. Via the Sun Network File System (NFS), these data can be exported to Internet computers for direct access by the user`s application program(s). Due to the size of the files, this access method is preferred over File Transfer Protocol (FTP) access.

  13. Public census data on CD-ROM at Lawrence Berkeley Laboratory. Revision 3

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, D.W.

    1993-01-16

    The Comprehensive Epidemiologic Data Resource (CEDR) and Populations at Risk to Environmental Pollution (PAREP) projects, of the Information and Computing Sciences Division (ICSD) at Lawrence Berkeley Laboratory (LBL), are using public socioeconomic and geographic data files which are available to CEDR and PAREP collaborators via LBL`s computing network. At this time 72 CD-ROM diskettes (approximately 37 gigabytes) are on line via the Unix file server ``cedrcd.lbl.gov``. Most of the files are from the US Bureau of the Census, and many of these pertain to the 1990 Census of Population and Housing. All the CD-ROM diskettes contain documentation in the form of ASCII text files. In addition, printed documentation for most files is available for inspection at University of California Data and Technical Assistance (UC DATA), tel. (510) 642-6571, or the UC Documents Library, tel. (510) 642-2569, both located on the UC Berkeley Campus. Many of the CD-ROM diskettes distributed by the Census Bureau contain software for PC compatible computers, for easily accessing the data. Shared access to the data is maintained through a collaboration among the CEDR and PAREP projects at LBL, and UC DATA, and the UC Documents Library. LBL is grateful to UC DATA and the UC Documents Library for the use of their CD-ROM diskettes. Shared access to LBL facilities may be restricted in the future if costs become prohibitive. Via the Sun Network File System (NFS), these data can be exported to Internet computers for direct access by the user`s application program(s). Due to the size of the files, this access method is preferred over File Transfer Protocol (FTP) access. Please contact Deane Merrill (dwmerrill@lbl.gov) if you wish to make use of the data.

  14. Public census data on CD-ROM at Lawrence Berkeley Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, D.W.

    1992-10-01

    The Comprehensive Epidemiologic Data Resource (CEDR) and Populations at Risk to Environmental Pollution (PAREP) projects, of the Information and Computing Sciences Division (ICSD) at Lawrence Berkeley Laboratory (LBL), are using public socio-economic and geographic data files which are available to CEDR and PAREP collaborators via LBL`s computing network. At this time 70 CD-ROM diskettes (approximately 36 gigabytes) are on line via the Unix file server cedrcd. lbl. gov. Most of the files are from the US Bureau of the Census, and most pertain to the 1990 Census of Population and Housing. All the CD-ROM diskettes contain documentation in the form of ASCII text files. Printed documentation for most files is available for inspection at University of California Data and Technical Assistance (UC DATA), or the UC Documents Library. Many of the CD-ROM diskettes distributed by the Census Bureau contain software for PC compatible computers, for easily accessing the data. Shared access to the data is maintained through a collaboration among the CEDR and PAREP projects at LBL, and UC DATA, and the UC Documents Library. Via the Sun Network File System (NFS), these data can be exported to Internet computers for direct access by the user`s application program(s).

  15. Public census data on CD-ROM at Lawrence Berkeley Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, D.W.

    1992-10-01

    The Comprehensive Epidemiologic Data Resource (CEDR) and Populations at Risk to Environmental Pollution (PAREP) projects, of the Information and Computing Sciences Division (ICSD) at Lawrence Berkeley Laboratory (LBL), are using public socio-economic and geographic data files which are available to CEDR and PAREP collaborators via LBL's computing network. At this time 70 CD-ROM diskettes (approximately 36 gigabytes) are on line via the Unix file server cedrcd. lbl. gov. Most of the files are from the US Bureau of the Census, and most pertain to the 1990 Census of Population and Housing. All the CD-ROM diskettes contain documentation in the form of ASCII text files. Printed documentation for most files is available for inspection at University of California Data and Technical Assistance (UC DATA), or the UC Documents Library. Many of the CD-ROM diskettes distributed by the Census Bureau contain software for PC compatible computers, for easily accessing the data. Shared access to the data is maintained through a collaboration among the CEDR and PAREP projects at LBL, and UC DATA, and the UC Documents Library. Via the Sun Network File System (NFS), these data can be exported to Internet computers for direct access by the user's application program(s).

  16. Mechanical Systems, Classical Models

    CERN Document Server

    Teodorescu, Petre P

    2009-01-01

    This third volume completes the Work Mechanical Systems, Classical Models. The first two volumes dealt with particle dynamics and with discrete and continuous mechanical systems. The present volume studies analytical mechanics. Topics like Lagrangian and Hamiltonian mechanics, the Hamilton-Jacobi method, and a study of systems with separate variables are thoroughly discussed. Also included are variational principles and canonical transformations, integral invariants and exterior differential calculus, and particular attention is given to non-holonomic mechanical systems. The author explains in detail all important aspects of the science of mechanics, regarded as a natural science, and shows how they are useful in understanding important natural phenomena and solving problems of interest in applied and engineering sciences. Professor Teodorescu has spent more than fifty years as a Professor of Mechanics at the University of Bucharest and this book relies on the extensive literature on the subject as well as th...

  17. NEP systems model

    Science.gov (United States)

    George, Jeffrey A.

    A new nuclear electric propulsion (NEP) systems analysis code is discussed. The new code is modular and consists of a driver code and various subsystem models. The code models five different subsystems: (1) reactor/shield; (2) power conversion; (3) heat rejection; (4) power management and distribution (PMAD); and (5) thrusters. The code optimizes for the following design criteria: minimum mass; minimum radiator area; and low mass/low area. The code also optimizes the following parameters: separation distance; temperature ratio; pressure ratio; and transmission frequency. The discussion is presented in vugraph form.

  18. National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    Skinner, C.W. (Energy Information Administration, Washington, DC (United States))

    1993-01-01

    The Energy Information Administration is developing a new National Energy Modeling System to provide annual forecasts of energy supply, demand, and prices on a regional basis in the United States and, to a limited extent, in the rest of the world. The design for the system was based on a requirements analysis, a comparison of requirements with existing modeling capabilities, and a series of widely circulated issue papers defining the choices and tradeoffs for 13 key design decisions. An initial prototpye of the new NEMS was implemented in late 1992, with a more complete, operational version in 1993. NEMS is expected to provide EIA and other users with a greatly enhanced ability to illustrate quickly and effectively the effects of a wide range of energy policy proposals.

  19. Modeling Novo Nordisk Production Systems

    DEFF Research Database (Denmark)

    Miller, Thomas Dedenroth

    1997-01-01

    This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'.......This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'....

  20. Aksum-Rom tur/retur - de sidste hundrede meter af en senantik steles rejse

    DEFF Research Database (Denmark)

    Friis, Ib

    2010-01-01

    Beskriver genopstillingen i Aksum, Etiopien, af en senantik stele, der under Mussolini blev flyttet til Rom.......Beskriver genopstillingen i Aksum, Etiopien, af en senantik stele, der under Mussolini blev flyttet til Rom....

  1. System of systems modeling and analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, James E.; Anderson, Dennis James; Longsine, Dennis E. (Intera, Inc., Austin, TX); Shirah, Donald N.

    2005-01-01

    This report documents the results of an LDRD program entitled 'System of Systems Modeling and Analysis' that was conducted during FY 2003 and FY 2004. Systems that themselves consist of multiple systems (referred to here as System of Systems or SoS) introduce a level of complexity to systems performance analysis and optimization that is not readily addressable by existing capabilities. The objective of the 'System of Systems Modeling and Analysis' project was to develop an integrated modeling and simulation environment that addresses the complex SoS modeling and analysis needs. The approach to meeting this objective involved two key efforts. First, a static analysis approach, called state modeling, has been developed that is useful for analyzing the average performance of systems over defined use conditions. The state modeling capability supports analysis and optimization of multiple systems and multiple performance measures or measures of effectiveness. The second effort involves time simulation which represents every system in the simulation using an encapsulated state model (State Model Object or SMO). The time simulation can analyze any number of systems including cross-platform dependencies and a detailed treatment of the logistics required to support the systems in a defined mission.

  2. Using CD-ROMs as a Pedagogical Tool

    Science.gov (United States)

    White, Andrew

    2007-01-01

    Purpose: This paper aims to explore the potential uses of CD-ROMs in multicultural education through an analysis of the development of a digital archive of political posters relating to the Northern Irish conflict. Design/methodology/approach: The author draws on literature on the relationship between new media platforms and the construction of…

  3. Stretching & Flexibility: An Interactive Encyclopedia of Stretching. [CD-ROM].

    Science.gov (United States)

    2002

    This CD-ROM offers 140 different stretches in full-motion video sequences. It focuses on the proper techniques for overall physical fitness, injury prevention and rehabilitation, and 23 different sports (e.g., golf, running, soccer, skiing, climbing, football, and baseball). Topics include stretching for sports; stretching awareness and education…

  4. Conserving Earth's Biodiversity. [CD-ROM and] Instructor's Manual.

    Science.gov (United States)

    2000

    This CD-ROM is designed as an interactive learning tool to support teaching in highly interdisciplinary fields such as conservation of biodiversity. Topics introduced in the software include the impact of humans on natural landscapes, threats to biodiversity, methods and theories of conservation biology, environmental laws, and relevant economic…

  5. Nuevos Destinos: A CD-ROM for Advanced Beginning Spanish.

    Science.gov (United States)

    Blake, Robert J.

    1999-01-01

    Provides a description of the Nuevos Destinos CD-ROM, a joint production for students learning Spanish at the advanced-beginning, intermediate-low, or native-speaker level. Nuevos Destinos involves students in meaningful ways by asking them to solve real-world problems encountered in law offices. (Author/VWL)

  6. Assessment of CD-ROM Technology in Classroom Teaching.

    Science.gov (United States)

    Shellhart, W. Craig; Oesterle, Larry J.

    1997-01-01

    A study compared learning outcomes in an orthodontic biomechanics course when a CD-ROM was used in one group and photographic slides were used in another. Students in both groups performed at similar levels on a written examination and responded similarly to a statement reflecting how they understood the material. However, students felt the…

  7. Reading a CD-ROM without a photodiode

    Science.gov (United States)

    Wishon, Michael J.; Mourozeau, G.; Ng, K.; Sahai, A. A.; Locquet, Alexandre; Citrin, D. S.

    2016-04-01

    We use a laser diode from a commercial CD/DVD-ROM drive to detect changes in the surface of a diffraction grating without a photodiode. Specifically, we exploit the changing terminal voltage in the laser-diode due to changing feedback strength as the laser is rastered across the grating's surface.

  8. Stratford Studios Proudly Liberates Romeo & Juliet [CD-ROM].

    Science.gov (United States)

    1997

    This CD-ROM product is an interactive supplement to Shakespeare's text of "Romeo and Juliet." It contains an interactive cast of characters and the entire script of the play with an accessible audio performance. Other features include: "Dr. Wacko"--a feature that calls the student's attention to the more subtle nuances of the plot by asking…

  9. Stretching & Flexibility: An Interactive Encyclopedia of Stretching. [CD-ROM].

    Science.gov (United States)

    2002

    This CD-ROM offers 140 different stretches in full-motion video sequences. It focuses on the proper techniques for overall physical fitness, injury prevention and rehabilitation, and 23 different sports (e.g., golf, running, soccer, skiing, climbing, football, and baseball). Topics include stretching for sports; stretching awareness and education…

  10. Learn about Earth Science: Weather. [CD-ROM].

    Science.gov (United States)

    2000

    This CD-ROM, designed for students in grades K-2, explores the world of weather. Students investigate weather to learn about climate and the seasons, how animals adapt to weather changes, how clouds tell us about conditions, and how weather plays a part in our everyday lives. The weather calendar lets students record and write about conditions…

  11. Databases on CD-ROM: Comparative Factors for Purchase.

    Science.gov (United States)

    Peters, Charles

    1987-01-01

    Describes databases available on optical disks, compares the databases with their print and online analogs, and suggests that the librarian should call such products to the attention of users needing information available in CD-ROM format. Five features desirable to most libraries are listed. (Author/CLB)

  12. CPU--Constructing Physics Understanding[TM]. [CD-ROM].

    Science.gov (United States)

    2000

    This CD-ROM consists of simulation software that allows students to conduct countless experiments using 20 Java simulators and curriculum units that explore light and color, forces and motion, sound and waves, static electricity and magnetism, current electricity, the nature of matter, and a unit on underpinnings. Setups can be designed by the…

  13. CD-ROM Multimodal Affordances: Classroom Interaction Perspectives in the Malaysian English Literacy Hour

    Science.gov (United States)

    Gardner, Sheena; Yaacob, Aizan

    2009-01-01

    CD-ROM affordances are explored in this article through participation in classroom interaction. CD-ROMs for shared reading of animated stories and language work were introduced to all Malaysian primary schools in 2003 for the Year 1 English Literacy Hour. We present classroom interaction extracts that show how the same CD-ROMs offer different…

  14. Questions to Answer before You Branch out on a CD-ROM Network.

    Science.gov (United States)

    Simpson, Carol Mann

    1992-01-01

    Examines issues that librarians must address when purchasing databases on CD-ROM for networking. Highlights include network licenses; costs; restrictions on network rights; ownership of CD-ROMs; hardware requirements; fees for upgrading software; CD-ROM servers; pricing options; training materials; and disk drives. (LRW)

  15. Reduced-order modeling for rotating rotor-bearing systems with cracked impellers using three-dimensional finite element models

    Science.gov (United States)

    Wang, Shuai; Wang, Yu; Zi, Yanyang; Li, Bing; He, Zhengjia

    2015-10-01

    A novel reduced-order modeling method is presented in this paper for dynamics analysis of rotating impeller-shaft-bearing assembly with cracked impellers. Based on three-dimensional finite element model, the complex component mode synthesis (CMS) method is employed to generate an efficient reduced-order model (ROM) for studying the effects of crack on the global vibration of the rotating assembly. First, a modeling framework for impeller-shaft-bearing systems in rotating frame is presented. Rotational effects, including Coriolis matrix and centrifugal softening, have been taken into account. Then, the governing equation of motion of the damped gyroscopic system is reduced by the complex CMS method. Finally, the obtained ROM is employed to study the effects of crack on assembly's vibration. During the steady-state response analysis, external excitations on the impeller due to rotor-stator interactions have been taken into account, which was however neglected in previous investigations on rotordynamics. Numerical results show that the lower-order eigenvalues and the unbalance response of the assembly are not sensitive to the local crack on impeller. Nevertheless, the flexible coupling between impeller and shaft becomes more complex when the air flow-induced excitations are considered. Under EO1 traveling wave excitations, a crack leads to slight changes in the assembly's response. In contrast, the effect of crack becomes significant when the assembly is excited by EO2 and higher EO excitations. Moreover, the nonlinear crack breathing effects affect the assembly's response obviously. Finally, a potential technique for detecting the crack on impeller during operation is discussed.

  16. Providing Access to CD-ROM Databases in a Campus Setting. Part II: Networking CD-ROMs via a LAN.

    Science.gov (United States)

    Koren, Judy

    1992-01-01

    The second part of a report on CD-ROM networking in libraries describes LAN (local area network) technology; networking software and towers; gateway software for connecting to campuswide networks; Macintosh LANs; and network licenses. Several product and software reviews are included, and a sidebar lists vendor addresses. (NRP)

  17. Biases of the Arctic climate in a regional ocean-sea ice-atmosphere coupled model:an annual validation

    Institute of Scientific and Technical Information of China (English)

    LIU Xiying

    2014-01-01

    The Coupling of three model components, WRF/PCE (polar climate extension version of weather research and forecasting model ( WRF)), ROMS (regional ocean modeling system), and CICE (community ice code), has been implemented, and the regional atmosphere-ocean-sea ice coupled model named WRF/PCE-ROMS-CICE has been validated against ERA-interim reanalysis data sets for 1989. To better understand the reasons that generate model biases, the WRF/PCE-ROMS-CICE results were compared with those of its components, the WRF/PCE and the ROMS-CICE. There are cold biases in surface air temperature (SAT) over the Arctic Ocean, which contribute to the sea ice concentration (SIC) and sea surface temperature (SST) biases in the results of the WRF/PCE-ROMS-CICE. The cold SAT biases also appear in results of the atmo-spheric component with a mild temperature in winter and similar temperature in summer. Compared to results from the WRF/PCE, due to influences of different distributions of the SIC and the SST and inclusion of interactions of air-sea-sea ice in the WRF/PCE-ROMS-CICE, the simulated SAT has new features. These influences also lead to apparent differences at higher levels of the atmosphere, which can be thought as responses to biases in the SST and sea ice extent. There are similar atmospheric responses in feature of distribution to sea ice biases at 700 and 500 hPa, and the strength of responses weakens when the pressure decreases in January. The atmospheric responses in July reach up to 200 hPa. There are surplus sea ice ex-tents in the Greenland Sea, the Barents Sea, the Davis Strait and the Chukchi Sea in winter and in the Beau-fort Sea, the Chukchi Sea, the East Siberian Sea and the Laptev Sea in summer in the ROMS-CICE. These differences in the SIC distribution can all be explained by those in the SST distributions. These features in the simulated SST and SIC from ROMS-CICE also appear in the WRF/PCE-ROMS-CICE. It is shown that the performance of the WRF/PCE-ROMS-CICE is

  18. CD-ROM optics for flying height measurement in hard disk drives

    Science.gov (United States)

    Tunstall, Glen; Jenkins, David F. L.; Clegg, Warwick W.; Li, Amei; Davey, Paul

    2001-12-01

    One of the most critical and effective parameters in increasing areal density is the flying height or spacing between the read-write head and the recording disk medium. As the flying height reduces to near contact, the head flies around 5 nm about the disk surface. To date, optical interferometry has been the major means for the characterization of this parameter. However, it is difficult to use it directly to measure the flying height on a sealed drive. To circumvent this limitation, a system based upon CD-ROM optics has been designed. The results from the system are correlated to measurements of suspension arm movement and disk flutter using poly-vinylidine-flouride (PVdF) strain sensors. A CD-ROM drive utilizes a laser with photodiodes to read data from the disk. The photo detector output responds linearly to changes in the lens-disk separation. In our system two CD-ROM heads are located within a rig that allows independent positioning in all three planes. The optics are configured to reflect off of a typical hard disk drive disk and the slider. To validate its performance a thin (110 micron) sheet of poly vinylidine flouride (PVdF) piezoelectric material is bonded to the suspension arm to measure the average induced strain. A further PVdF sensor was used to measure the edge displacement of the disk due to disk bending. The sensor used was in a cantilever configuration, with one end rigidly bonded to the drive chassis in a manner that pre-tensions the cantilever against the disk. Any movement of the disk would change the strain induced in the cantilever.

  19. Comparative evaluation of plasma ROM levels in chronic periodontitis patients before and after non-surgical and surgical periodontal therapy: A clinical trial

    Directory of Open Access Journals (Sweden)

    Sohini Chaudhary

    2014-01-01

    Full Text Available Objective: Chronic periodontitis (CP is associated with increased levels of blood reactive oxygen species (ROS. So, treatment of CP may lead to decrease in blood ROS. However, not much literature is available comparing the effect of surgical and non-surgical periodontal treatment on blood ROS levels. Reactive oxygen metabolites (ROMs are a useful measure of blood ROS. The aim of this study was to investigate the effect of periodontal treatment on plasma ROM levels in CP patients. Materials and Methods: Thirty CP patients and 15 controls were monitored. Plasma samples were collected at baseline and the clinical parameters were recorded. The CP patients were randomly divided into two groups: Scaling and root planing (Group II and periodontal flap surgery (Group III. Both groups were re-evaluated 1 and 2 months after therapy. Clinical parameters were reviewed, plasma samples collected, and ROM levels were determined using a spectrophotometric technique. Results: At baseline, the ROM levels for Group II and Group III were 519.8 ± 62.4 and 513.4 ± 74.7 CARR U, respectively, which were higher than Group I value (282.9 ± 23.9, P < 0.001. Periodontal treatment in CP patients resulted in improvement of clinical parameters and a highly significant reduction in plasma ROM level (P < 0.001 after 2 months. Also, there was a more significant reduction in plasma ROM levels in Group III as compared to Group II (P < 0.05. Conclusions: In CP patients, surgical periodontal treatment was more effective in lowering the plasma ROM levels than when non-surgical periodontal treatment was performed alone and, therefore, may be more beneficial in reducing systemic oxidative stress.

  20. Nanomechanical recognition of prognostic biomarker suPAR with DVD-ROM optical technology

    DEFF Research Database (Denmark)

    Bache, Michael; Bosco, Filippo; Brøgger, Anna Line

    2013-01-01

    In this work the use of a high-throughput nanomechanical detection system based on a DVD-ROM optical drive and cantilever sensors is presented for the detection of urokinase plasminogen activator receptor inflammatory biomarker (uPAR). Several large scale studies have linked elevated levels...... of soluble uPAR (suPAR) to infectious diseases, such as HIV, and certain types of cancer. Using hundreds of cantilevers and a DVD-based platform, cantilever deflection response from antibody–antigen recognition is investigated as a function of suPAR concentration. The goal is to provide a cheap and portable...

  1. ECO-BIOLOGICAL SYSTEM MODELING

    Directory of Open Access Journals (Sweden)

    T. I. Burak

    2015-01-01

    Full Text Available The methodology for computer modeling of complex eco-biological models is presented in this paper. It is based on system approach of J. Forrester. Developed methodology is universal for complex ecological and biological systems. Modeling algorithm considers specialties of eco-biological systems and shows adequate and accurate results in practice. 

  2. Mathematical System Theory and System Modeling

    OpenAIRE

    1980-01-01

    Choosing models related effectively to the questions to be addressed is a central issue in the craft of systems analysis. Since the mathematical description the analyst chooses constrains the types of issues he candeal with, it is important for these models to be selected so as to yield limitations that are acceptable in view of the questions the systems analysis seeks to answer. In this paper, the author gives an overview of the central issues affecting the question of model choice. To ...

  3. Comparative evaluation of plasma ROM levels in chronic periodontitis patients before and after non-surgical and surgical periodontal therapy: A clinical trial

    Science.gov (United States)

    Chaudhary, Sohini; Gowda, Triveni M.; Mehta, Dhoom S.; Kumar, Tarun A. B.

    2014-01-01

    Objective: Chronic periodontitis (CP) is associated with increased levels of blood reactive oxygen species (ROS). So, treatment of CP may lead to decrease in blood ROS. However, not much literature is available comparing the effect of surgical and non-surgical periodontal treatment on blood ROS levels. Reactive oxygen metabolites (ROMs) are a useful measure of blood ROS. The aim of this study was to investigate the effect of periodontal treatment on plasma ROM levels in CP patients. Materials and Methods: Thirty CP patients and 15 controls were monitored. Plasma samples were collected at baseline and the clinical parameters were recorded. The CP patients were randomly divided into two groups: Scaling and root planing (Group II) and periodontal flap surgery (Group III). Both groups were re-evaluated 1 and 2 months after therapy. Clinical parameters were reviewed, plasma samples collected, and ROM levels were determined using a spectrophotometric technique. Results: At baseline, the ROM levels for Group II and Group III were 519.8 ± 62.4 and 513.4 ± 74.7 CARR U, respectively, which were higher than Group I value (282.9 ± 23.9, P surgical periodontal treatment was more effective in lowering the plasma ROM levels than when non-surgical periodontal treatment was performed alone and, therefore, may be more beneficial in reducing systemic oxidative stress. PMID:24872618

  4. Impacts of air-sea interactions on regional air quality predictions using WRF/Chem v3.6.1 coupled with ROMS v3.7: southeastern US example

    Science.gov (United States)

    He, J.; He, R.; Zhang, Y.

    2015-11-01

    Air-sea interactions have significant impacts on coastal convection and surface fluxes exchange, which are important for the spatial and vertical distributions of air pollutants that affect public health, particularly in densely populated coastal areas. To understand the impacts of air-sea interactions on coastal air quality predictions, sensitivity simulations with different cumulus parameterization schemes and atmosphere-ocean coupling are conducted in this work over southeastern US in July 2010 using the Weather Research and Forecasting Model with Chemistry (WRF/Chem). The results show that different cumulus parameterization schemes can result in an 85 m difference in the domain averaged planetary boundary layer height (PBLH), and 4.8 mm difference in the domain averaged daily precipitation. Comparing to WRF/Chem without air-sea interactions, WRF/Chem with a 1-D ocean mixed layer model (WRF/Chem-OML) and WRF/Chem coupled with a 3-D Regional Ocean Modeling System (WRF/Chem-ROMS) predict the domain averaged changes in the sea surface temperature of 0.1 and 1.0 °C, respectively. The simulated differences in the surface concentrations of ozone (O3) and PM2.5 between WRF/Chem-ROMS and WRF/Chem can be as large as 17.3 ppb and 7.9 μg m-3, respectively. The largest changes simulated from WRF/Chem-ROMS in surface concentrations of O3 and particulate matter with diameter less than and equal to 2.5 μm (PM2.5) occur not only along coast and remote ocean, but also over some inland areas. Extensive validations against observations, show that WRF/Chem-ROMS improves the predictions of most cloud and radiative variables, and surface concentrations of some chemical species such as sulfur dioxide, nitric acid, maximum 1 h and 8 h O3, sulfate, ammonium, nitrate, and particulate matter with diameter less than and equal to 10 μm (PM10). This illustrates the benefits and needs of using coupled atmospheric-ocean model with advanced model representations of air-sea interactions for

  5. Model Reduction of Hybrid Systems

    DEFF Research Database (Denmark)

    Shaker, Hamid Reza

    systems are derived in this thesis. The results are used for output feedback control of switched nonlinear systems. Model reduction of piecewise affine systems is also studied in this thesis. The proposed method is based on the reduction of linear subsystems inside the polytopes. The methods which......High-Technological solutions of today are characterized by complex dynamical models. A lot of these models have inherent hybrid/switching structure. Hybrid/switched systems are powerful models for distributed embedded systems design where discrete controls are applied to continuous processes...... of hybrid systems, designing controllers and implementations is very high so that the use of these models is limited in applications where the size of the state space is large. To cope with complexity, model reduction is a powerful technique. This thesis presents methods for model reduction and stability...

  6. Modelling on fuzzy control systems

    Institute of Scientific and Technical Information of China (English)

    LI; Hongxing(李洪兴); WANG; Jiayin(王加银); MIAO; Zhihong(苗志宏)

    2002-01-01

    A kind of modelling method for fuzzy control systems is first proposed here, which is calledmodelling method based on fuzzy inference (MMFI). It should be regarded as the third modelling method thatis different from two well-known modelling methods, that is, the first modelling method, mechanism modellingmethod (MMM), and the second modelling method, system identification modelling method (SlMM). Thismethod can, based on the interpolation mechanism on fuzzy logic system, transfer a group of fuzzy inferencerules describing a practice system into a kind of nonlinear differential equation with variable coefficients, calledHX equations, so that the mathematical model of the system can be obtained. This means that we solve thedifficult problem of how to get a model represented as differential equations on a complicated or fuzzy controlsystem.

  7. Comparison of Intervertebral ROM in Multi-Level Cadaveric Lumbar Spines Using Distinct Pure Moment Loading Approaches

    Science.gov (United States)

    Santoni, Brandon; Cabezas, Andres F; Cook, Daniel J; Yeager, Matthew S; Billys, James B; Whiting, Benjamin

    2015-01-01

    Background Pure-moment loading is the test method of choice for spinal implant evaluation. However, the apparatuses and boundary conditions employed by laboratories in performing spine flexibility testing vary. The purpose of this study was to quantify the differences, if they exist, in intervertebral range of motion (ROM) resulting from different pure-moment loading apparatuses used in two laboratories. Methods Twenty-four (laboratory A) and forty-two (laboratory B) intact L1-S1 specimens were loaded using pure moments (±7.5 Nm) in flexion-extension (FE), lateral bending (LB) and axial torsion (AT). At laboratory A, pure moments were applied using a system of cables, pulleys and suspended weights in 1.5 Nm increments. At laboratory B, specimens were loaded in a pneumatic biaxial test frame mounted with counteracting stepper-motor-driven biaxial gimbals. ROM was obtained in both labs using identical optoelectronic systems and compared. Results In FE, total L1-L5 ROM was similar, on average, between the two laboratories (lab A: 37.4° ± 9.1°; lab B: 35.0° ± 8.9°, p=0.289). Larger apparent differences, on average, were noted between labs in AT (lab A: 19.4° ± 7.3°; lab B: 15.7° ± 7.1°, p=0.074), and this finding was significant for combined right and left LB (lab A: 45.5° ± 11.4°; lab B: 35.3° ± 8.5°, p < 0.001). Conclusions To our knowledge, this is the first study comparing ROM of multi-segment lumbar spines between laboratories utilizing different apparatuses. The results of this study show that intervertebral ROM in multi-segment lumbar spine constructs are markedly similar in FE loading. Differences in boundary conditions are likely the source of small and sometimes statistically significant differences between the two techniques in LB and AT ROM. The relative merits of each testing strategy with regard to the physiologic conditions that are to be simulated should be considered in the design of a study including LB and AT modes of loading. An

  8. Computer aided systems human engineering: A hypermedia tool

    Science.gov (United States)

    Boff, Kenneth R.; Monk, Donald L.; Cody, William J.

    1992-01-01

    The Computer Aided Systems Human Engineering (CASHE) system, Version 1.0, is a multimedia ergonomics database on CD-ROM for the Apple Macintosh II computer, being developed for use by human system designers, educators, and researchers. It will initially be available on CD-ROM and will allow users to access ergonomics data and models stored electronically as text, graphics, and audio. The CASHE CD-ROM, Version 1.0 will contain the Boff and Lincoln (1988) Engineering Data Compendium, MIL-STD-1472D and a unique, interactive simulation capability, the Perception and Performance Prototyper. Its features also include a specialized data retrieval, scaling, and analysis capability and the state of the art in information retrieval, browsing, and navigation.

  9. Energy System Modeling with REopt

    Energy Technology Data Exchange (ETDEWEB)

    Simpkins, Travis; Anderson, Kate; Cutler, Dylan; Olis, Dan; Elgqvist, Emma; DiOrio, Nick; Walker, Andy

    2016-07-15

    This poster details how REopt - NREL's software modeling platform for energy systems integration and optimization - can help to model energy systems. Some benefits of modeling with REopt include optimizing behind the meter storage for cost and resiliency, optimizing lab testing, optimizing dispatch of utility scale storage, and quantifying renewable energy impact on outage survivability.

  10. Multimedia Educational CD-ROM - The Living Universe

    Science.gov (United States)

    Rosen, Ralev

    2002-01-01

    I and the other members of the team Celestial Generation dedicate this interactive CD-ROM to our Physics, Astronomy, Biology and English teachers. The members of the team that created the project are Rosen Ralev, Nadezhda Radeva, Iliyan Darganov and Yana Radeva from Technical University of Sofia, the English High schools - Varna, Technical University of Varna and Connecticut College. The leader of the project is Mrs. Veselka Radeva - an astronomer from the Astronomical Observatory in Varna. The main idea of the project " The Living Universe" is that water is a cradle of life in the Universe. As water so abundant in the Universe, life. The project has 4 main themes, combining knowledge from the fields of Biology and Astronomy, one Gallery with our photographs and one amusing theme with interesting and curious facts about life on the Earth and in the Universe. The statistics of our project is: 152 pages and 425 pictures. Over 2/3 from the pictures are ours and we used the rest of them with the kind permission of their authors.The theme Living Water starts with a lyric poem by Petya Dubarova. In the first under-theme- "Water-the cradle of life" introduce you graphics of the structure of the water molecule and its important biological properties. The thesis continues following out the origin and development of life in the oceans on our planet. The next to the last under-theme - sensitive life in water is devoted to dolphins. The third under-theme is " Water in the Universe". Here two of the themes show results from the observations with the space telescope Submillimeter Wave Astronomy Satellite, that found water steams in the interstellar space and around a star in the constellation Leo ( it is supposed that this is a huge comet cloud). This third theme is the most extensive one in this section- it examines the possibility of water being available on each planet in the Solar system: Mercury-most likely there is ice on the polar areas that are the coolest .On Venus it

  11. Modeling soft interface dominated systems

    NARCIS (Netherlands)

    Lamorgese, A.; Mauri, R.; Sagis, L.M.C.

    2017-01-01

    The two main continuum frameworks used for modeling the dynamics of soft multiphase systems are the Gibbs dividing surface model, and the diffuse interface model. In the former the interface is modeled as a two dimensional surface, and excess properties such as a surface density, or surface energy

  12. Validation of systems biology models

    NARCIS (Netherlands)

    Hasdemir, D.

    2015-01-01

    The paradigm shift from qualitative to quantitative analysis of biological systems brought a substantial number of modeling approaches to the stage of molecular biology research. These include but certainly are not limited to nonlinear kinetic models, static network models and models obtained by the

  13. Modeling of deterministic chaotic systems

    Energy Technology Data Exchange (ETDEWEB)

    Lai, Y. [Department of Physics and Astronomy and Department of Mathematics, The University of Kansas, Lawrence, Kansas 66045 (United States); Grebogi, C. [Institute for Plasma Research, University of Maryland, College Park, Maryland 20742 (United States); Grebogi, C.; Kurths, J. [Department of Physics and Astrophysics, Universitaet Potsdam, Postfach 601553, D-14415 Potsdam (Germany)

    1999-03-01

    The success of deterministic modeling of a physical system relies on whether the solution of the model would approximate the dynamics of the actual system. When the system is chaotic, situations can arise where periodic orbits embedded in the chaotic set have distinct number of unstable directions and, as a consequence, no model of the system produces reasonably long trajectories that are realized by nature. We argue and present physical examples indicating that, in such a case, though the model is deterministic and low dimensional, statistical quantities can still be reliably computed. {copyright} {ital 1999} {ital The American Physical Society}

  14. Modelling of wastewater systems

    DEFF Research Database (Denmark)

    Bechmann, Henrik

    In this thesis, models of pollution fluxes in the inlet to 2 Danish wastewater treatment plants (WWTPs) as well as of suspended solids (SS) concentrations in the aeration tanks of an alternating WWTP and in the effluent from the aeration tanks are developed. The latter model is furthermore used...

  15. Modelling Epistemic Systems

    CERN Document Server

    Martins, Andre C R

    2012-01-01

    In this Chapter, I will explore the use of modeling in order to understand how Science works. I will discuss the modeling of scientific communities, providing a general, non-comprehensive overview of existing models, with a focus on the use of the tools of Agent-Based Modeling and Opinion Dynamics. A special attention will be paid to models inspired by a Bayesian formalism of Opinion Dynamics. The objective of this exploration is to better understand the effect that different conditions might have on the reliability of the opinions of a scientific community. We will see that, by using artificial worlds as exploring grounds, we can prevent some epistemological problems with the definition of truth and obtain insights on the conditions that might cause the quest for more reliable knowledge to fail.

  16. From Numeric Models to Granular System Modeling

    Directory of Open Access Journals (Sweden)

    Witold Pedrycz

    2015-03-01

    To make this study self-contained, we briefly recall the key concepts of granular computing and demonstrate how this conceptual framework and its algorithmic fundamentals give rise to granular models. We discuss several representative formal setups used in describing and processing information granules including fuzzy sets, rough sets, and interval calculus. Key architectures of models dwell upon relationships among information granules. We demonstrate how information granularity and its optimization can be regarded as an important design asset to be exploited in system modeling and giving rise to granular models. With this regard, an important category of rule-based models along with their granular enrichments is studied in detail.

  17. Pluralistic Modeling of Complex Systems

    CERN Document Server

    Helbing, Dirk

    2010-01-01

    The modeling of complex systems such as ecological or socio-economic systems can be very challenging. Although various modeling approaches exist, they are generally not compatible and mutually consistent, and empirical data often do not allow one to decide what model is the right one, the best one, or most appropriate one. Moreover, as the recent financial and economic crisis shows, relying on a single, idealized model can be very costly. This contribution tries to shed new light on problems that arise when complex systems are modeled. While the arguments can be transferred to many different systems, the related scientific challenges are illustrated for social, economic, and traffic systems. The contribution discusses issues that are sometimes overlooked and tries to overcome some frequent misunderstandings and controversies of the past. At the same time, it is highlighted how some long-standing scientific puzzles may be solved by considering non-linear models of heterogeneous agents with spatio-temporal inte...

  18. Assessment of oxidative stress in serum by d-ROMs test.

    Science.gov (United States)

    Kilk, K; Meitern, R; Härmson, O; Soomets, U; Hõrak, P

    2014-08-01

    Assessment of oxidative stress is an important but technically challenging procedure in medical and biological research. The reactive oxygen metabolites (d-ROMs) test is a simple assay marketed for analyzing the total amount of hydroperoxides in serum via the Fenton's reaction. Earlier reports have raised a suspicion that a part of the signal detected in the assay comes from sources other than metabolites generated by oxidative stress. The aim of this study was to identify which serum components interfere with the d-ROMs signal. By application of sodium azide, ethylenediaminetetraacetic acid, sodium dodecylsulphate, varying temperature, and spiking endogenous substances we demonstrate that in the case of mammalian sera the assay determines ceruloplasmin (CP) activity with potential interferences from hydroperoxides, iron level, thiols, and albumin. In sera of avian species hydroperoxides contribute more to the test outcome, but the CP part is insensitive to inhibition by azide. In conclusion, this assay has deficiencies in terms of detecting realistic concentrations of hydroperoxides, is mostly measuring CP and is also interfered with other serum components, making it very difficult to interpret in most biological systems.

  19. Accomplishment of Blu-ray disc ROM by electron beam recording: dual layer with 50-GB capacity

    Science.gov (United States)

    Tsukuda, Masahiko; Ito, Eiichi; Tomiyama, Morio; Abe, Shinya; Ohno, Eiji; David, Stephane; Dubs, Martin; Bayliss, Chris; Dix, Colin; Ogilvie, Nick; Proffitt, Simon; Scott-Maxwell, David; Fantin, Bernard; Eisenhammer, Thomas

    2004-09-01

    A BD-ROM production-capable Electron Beam Recorder (EBR) has been developed, resulting from an optimization program conducted on a prior prototype. The key technical improvements are a comprehensive upgrade of the mechanical master driving system to reduce the track pitch deviations and the implementation of a dynamic focus system, including an axial run-out checker to obtain a uniform jitter. And the multi-pulse write strategy was adopted to control the pit shapes. The resulting masters show a typical radial track pitch variation comprised in the range +/-6.6nm across the entire recorded area. The corresponding push-pull signal deviation is found to be less than 18% on the whole disc and less than 14% in one revolution. The signal jitter of dual layered BD-ROM disc less than 6.1% on layer 0, and less than 6.7% on layer 1 with large enough push-pull amplitude through the whole radius. These results are fully compliant with the requirements for the dual layered BD-ROM disc of 50GB capacity.

  20. Analysis on Business Model choice and Emerging Capital Allocation f rom the Viewpoint of Enterprise Growth%商业模式选择与新兴资本配置研究--基于企业成长视角

    Institute of Scientific and Technical Information of China (English)

    许秀梅

    2015-01-01

    Under new economic environment ,technology ,information and knowledge replace traditional factors such as hu‐man ,property and material and become the fundamental driving force to enterprise growth .The business model is the bridge and tie to connect the emerging capital and enterprise grow th .According to different core strategy capital ,the busi‐ness model can be divided into three types such as technology dominance ,information dominance and know ledge domi‐nance .Based on different grow th stage of enterprise ,the paper analyzes business model choices and emerging capital allo‐cation problems .%在新经济环境下,技术、信息与知识已开始取代传统人、财、物要素,成为企业成长的根本动力。商业模式是连接新兴资本与企业成长的桥梁和纽带。按照所选择的核心战略资本,商业模式可分为技术主导、信息主导与知识主导3种类型。基于企业不同成长阶段,分析了商业模式选择与新兴资本的配置问题。

  1. Reduced order models, inertial manifolds, and global bifurcations: searching instability boundaries in nuclear power systems

    Energy Technology Data Exchange (ETDEWEB)

    Suarez-Antola, Roberto, E-mail: roberto.suarez@miem.gub.u, E-mail: rsuarez@ucu.edu.u [Universidad Catolica del Uruguay, Montevideo (Uruguay). Fac. de Ingenieria y Tecnologias. Dept. de Matematica; Ministerio de Industria, Energia y Mineria, Montevideo (Uruguay). Direccion General de Secretaria

    2011-07-01

    One of the goals of nuclear power systems design and operation is to restrict the possible states of certain critical subsystems to remain inside a certain bounded set of admissible states and state variations. In the framework of an analytic or numerical modeling process of a BWR power plant, this could imply first to find a suitable approximation to the solution manifold of the differential equations describing the stability behavior, and then a classification of the different solution types concerning their relation with the operational safety of the power plant. Inertial manifold theory gives a foundation for the construction and use of reduced order models (ROM's) of reactor dynamics to discover and characterize meaningful bifurcations that may pass unnoticed during digital simulations done with full scale computer codes of the nuclear power plant. The March-Leuba's BWR ROM is generalized and used to exemplify the analytical approach developed here. A nonlinear integral-differential equation in the logarithmic power is derived. Introducing a KBM Ansatz, a coupled set of two nonlinear ordinary differential equations is obtained. Analytical formulae are derived for the frequency of oscillation and the parameters that determine the stability of the steady states, including sub- and supercritical PAH bifurcations. A Bautin's bifurcation scenario seems possible on the power-flow plane: near the boundary of stability, a region where stable steady states are surrounded by unstable limit cycles surrounded at their turn by stable limit cycles. The analytical results are compared with recent digital simulations and applications of semi-analytical bifurcation theory done with reduced order models of BWR. (author)

  2. Integrated Modeling Systems

    Science.gov (United States)

    1989-01-01

    American Economic Review , 71:1 (March 1981). 181 J.M. Jones and F. Zufryden. "Adding Explanatory Variables to a Consumer Purchase Behavior Model: An...McCall. "An Operational Measure of Liquidity," The American Economic Review , 761 (March 1986). WMSI Working Paper 329. 212 Nelson, R., R. Sarin, and R

  3. Robust Disaster Recovery System Model

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Highly security-critical system should possess features of continuous service. We present a new Robust Disaster Recovery System Model (RDRSM). Through strengthening the ability of safe communications, RDRSM guarantees the secure and reliable command on disaster recovery. Its self-supervision capability can monitor the integrality and security of disaster recovery system itself. By 2D and 3D real-time visible platform provided by GIS, GPS and RS, the model makes the using, management and maintenance of disaster recovery system easier. RDRSM possesses predominant features of security, robustness and controllability. And it can be applied to highly security-critical environments such as E-government and bank. Conducted by RDRSM, an important E-government disaster recovery system has been constructed successfully. The feasibility of this model is verified by practice. We especially emphasize the significance of some components of the model, such as risk assessment, disaster recovery planning, system supervision and robust communication support.

  4. Mechanical Systems, Classical Models

    CERN Document Server

    Teodorescu, Petre P

    2007-01-01

    All phenomena in nature are characterized by motion; this is an essential property of matter, having infinitely many aspects. Motion can be mechanical, physical, chemical or biological, leading to various sciences of nature, mechanics being one of them. Mechanics deals with the objective laws of mechanical motion of bodies, the simplest form of motion. In the study of a science of nature mathematics plays an important role. Mechanics is the first science of nature which was expressed in terms of mathematics by considering various mathematical models, associated to phenomena of the surrounding nature. Thus, its development was influenced by the use of a strong mathematical tool; on the other hand, we must observe that mechanics also influenced the introduction and the development of many mathematical notions. In this respect, the guideline of the present book is precisely the mathematical model of mechanics. A special accent is put on the solving methodology as well as on the mathematical tools used; vectors, ...

  5. Multimedia Fluid Mechanics - Multilingual Version CD-ROM

    Science.gov (United States)

    Homsy, G. M.; Aref, H.; Breuer, K. S.; Hochgreb, S.; Koseff, J. R.; Munson, B. R.; Powell, K. G.; Robertson, C. R.; Thoroddsen, S. T.

    2004-07-01

    This CD-ROM offers an interactive tool for teaching undergraduate fluid mechanics. It features experiments that demonstrate fluid mechanical phenomena, animations of important principles and concepts, virtual laboratories in which students acquire data from the images, interactive computational exercises in which parameters can be varied, and other descriptive and illuminating material on applications. The material may be accessed randomly through a hyperlinked text, a search engine, a video library, and a glossary of terms. The new edition has been thoroughly updated and includes versions in English, Spanish and French.

  6. Studies of Catalytic Model Systems

    DEFF Research Database (Denmark)

    Holse, Christian

    The overall topic of this thesis is within the field of catalysis, were model systems of different complexity have been studied utilizing a multipurpose Ultra High Vacuum chamber (UHV). The thesis falls in two different parts. First a simple model system in the form of a ruthenium single crystal...... is investigated. Second the development of a complex Cu/ZnO nanoparticle model system is described and gas-induced dynamical changes in the model system is investigated. The ruthenium crystal serves as an extremely simple model for studying CO dissociation which is the rate limiting step of the methanation...... process. The Ru(0 1 54) surface is studied by means of Scanning Tunneling Microscopy (STM), Temperature Programmed Desoprtion (TPD), and Oxygen Titration (OT) experiments. Real space evidence of periodic features on every second monatomic step is observed via STM when the a clean ruthenium surface...

  7. Relocatable Coastal Modeling System

    Science.gov (United States)

    2016-06-07

    These relationships are stored on a variable-resolution grid (illustrated in figure 1b below) with sampling of 1 degree in deep water (and in data...version is referred to as MODAS2.1, which is now operational at NAVO. The NOMADS interface is being replaced by a system-independent, web -based version...inside the user’s web browser plus Perl CGI scripts which ran on a webserver. This permitted the user to run MODAS (and POM and other modules as they are

  8. Experimental study on gamma irradiation effects of floating gate ROMs The ROM is stated for Read-only Memory

    CERN Document Server

    He Chao Hui; Chen Xiao Hua; Wang Yan Ping; Peng Hong Lun

    2002-01-01

    Experimental results of gamma irradiation effects are given for Floating gate ROMs. There is an accumulated dose threshold. Errors occur when accumulated dose is above the threshold, no error occurs when below the threshold. The errors go up with the increase of the accumulated dose. Errors occur in devices that are measured during irradiation and irradiated in power on, moreover, new data cannot be written in these devices with programmer. However, under more accumulated dose, there is no error in devices in power off mode and new data can be written in these devices with programmer

  9. Hydronic distribution system computer model

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, J.W.; Strasser, J.J.

    1994-10-01

    A computer model of a hot-water boiler and its associated hydronic thermal distribution loop has been developed at Brookhaven National Laboratory (BNL). It is intended to be incorporated as a submodel in a comprehensive model of residential-scale thermal distribution systems developed at Lawrence Berkeley. This will give the combined model the capability of modeling forced-air and hydronic distribution systems in the same house using the same supporting software. This report describes the development of the BNL hydronics model, initial results and internal consistency checks, and its intended relationship to the LBL model. A method of interacting with the LBL model that does not require physical integration of the two codes is described. This will provide capability now, with reduced up-front cost, as long as the number of runs required is not large.

  10. Data management system performance modeling

    Science.gov (United States)

    Kiser, Larry M.

    1993-01-01

    This paper discusses analytical techniques that have been used to gain a better understanding of the Space Station Freedom's (SSF's) Data Management System (DMS). The DMS is a complex, distributed, real-time computer system that has been redesigned numerous times. The implications of these redesigns have not been fully analyzed. This paper discusses the advantages and disadvantages for static analytical techniques such as Rate Monotonic Analysis (RMA) and also provides a rationale for dynamic modeling. Factors such as system architecture, processor utilization, bus architecture, queuing, etc. are well suited for analysis with a dynamic model. The significance of performance measures for a real-time system are discussed.

  11. Tassara: Romántico, burlador y ateo

    Directory of Open Access Journals (Sweden)

    Sebold, Russell P.

    2012-12-01

    Full Text Available Impassioned romantic with a classical soul, definer and teacher of romantic poetics, minister of Spain in Washington and London, handsome seducer, adored by the elegant ladies he dishonored, anguished atheist but in persistent dialogue with God, Gabriel García y Tassara (1817- 1875 is probably the most neglected of the great Spanish poets of his time. For the study of these facets of his figure, the principal documents utilized are his own verse, his extensive prolog to his Poems of 1872 and the Poetic Crown [necrology] that was offered him in 1878.Romántico exaltado de alma clásica, definidor y maestro de la poética romántica, ministro de España en Washington y Londres, guapo burlador, adorado de las elegantes damas que deshonraba, angustiado ateo pero persistente dialogante con Dios, Gabriel García y Tassara (1817- 1875 es probablemente el más descuidado de los grandes poetas españoles de su tiempo. Para el estudio de estas facetas de su figura, los principales documentos utilizados son su propio verso, su extenso prólogo a sus Poesías de 1872 y la Corona poética que se le ofreció en 1878.

  12. SM-ROM-GL (Strong Motion Romania Ground Level Database

    Directory of Open Access Journals (Sweden)

    Ioan Sorin BORCIA

    2015-07-01

    Full Text Available The SM-ROM-GL database includes data obtained by the processing of records performed at ground level by the Romanian seismic networks, namely INCERC, NIEP, NCSRR and ISPH-GEOTEC, during recent seismic events with moment magnitude Mw ≥ 5 and epicenters located in Romania. All the available seismic records were re-processed using the same basic software and the same procedures and options (filtering and baseline correction, in order to obtain a consistent dataset. The database stores computed parameters of seismic motions, i.e. peak values: PGA, PGV, PGD, effective peak values: EPA, EPV, EPD, control periods, spectral values of absolute acceleration, relative velocity and relative displacement, as well as of instrumental intensity (as defined bz Sandi and Borcia in 2011. The fields in the database include: coding of seismic events, stations and records, a number of associated fields (seismic event source parameters, geographical coordinates of seismic stations, links to the corresponding ground motion records, charts of the response spectra of absolute acceleration, relative velocity, relative displacement and instrumental intensity, as well as some other representative parameters of seismic motions. The conception of the SM-ROM-GL database allows for an easy maintenance; such that elementary knowledge of Microsoft Access 2000 is sufficient for its operation.

  13. 核电站温排水分布卫星遥感监测及验证%Monitoring the Thermal Plume f rom Coastal Nuclear Power Plant Using Satellite Remote Sensing Data:Modeling and Validation

    Institute of Scientific and Technical Information of China (English)

    朱利; 赵利民; 王桥; 张爱玲; 吴传庆; 李家国; 石继香

    2014-01-01

    Thermal plume from coastal nuclear power plant is a small-scale human activity ,mornitoring of which requires high-frequency and high-spatial remote sensing data .The infrared scanner (IRS) ,on board of HJ-1B ,has an infrared channel IRS4 with 300 m and 4-days as its spatial and temporal resolution .Remote sensing data aquired using IRS4 is an available source for mornitoring thermal plume .Retrieval pattern for coastal sea surface temperature (SST) was built to monitor the thermal plume from nuclear power plant .The research area is located near Guangdong Daya Bay Nuclear Power Station (GNPS) ,where syn-chronized validations were also implemented .The National Centers for Environmental Prediction (NCEP) data was interpolated spatially and temporally .The interpolated data as well as surface weather conditions were subsequently employed into radiative transfer model for the atmospheric correction of IRS4 thermal image .A look-up-table (LUT) was built for the inversion between IRS4 channel radiance and radiometric temperature ,and a fitted function was also built from the LUT data for the same purpose . The SST was finally retrieved based on those preprocessing procedures mentioned above .The bulk temperature (BT) of 84 sam-ples distributed near GNPS was shipboard collected synchronically using salinity-temperature-deepness (CTD) instruments .The discrete sample data was surface interpolated and compared with the satellite retrieved SST .Results show that the average BT o-ver the study area is 0.47 ℃ higher than the retrieved skin temperature (ST) .For areas far away from outfall ,the ST is higher than BT ,with differences less than 1.0 ℃ .The main driving force for temperature variations in these regions is solar radiation . For areas near outfall ,on the contrary ,the retrieved ST is lower than BT ,and greater differences between the two (meaning >1.0 ℃) happen when it gets closer to the outfall .Unlike the former case ,the convective heat transfer resulting

  14. Reduced-Order Model for Leakage Through an Open Wellbore from the Reservoir due to Carbon Dioxide Injection

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Lehua [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Oldenburg, Curtis M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-07-26

    Potential CO2 leakage through existing open wellbores is one of the most significant hazards that need to be addressed in geologic carbon sequestration (GCS) projects. In the framework of the National Risk Assessment Partnership (NRAP) which requires fast computations for uncertainty analysis, rigorous simulation of the coupled wellbore-reservoir system is not practical. We have developed a 7,200-point look-up table reduced-order model (ROM) for estimating the potential leakage rate up open wellbores in response to CO2 injection nearby. The ROM is based on coupled simulations using T2Well/ECO2H which was run repeatedly for representative conditions relevant to NRAP to create a look-up table response-surface ROM. The ROM applies to a wellbore that fully penetrates a 20-m thick reservoir that is used for CO2 storage. The radially symmetric reservoir is assumed to have initially uniform pressure, temperature, gas saturation, and brine salinity, and it is assumed these conditions are held constant at the far-field boundary (100 m away from the wellbore). In such a system, the leakage can quickly reach quasi-steady state. The ROM table can be used to estimate both the free-phase CO2 and brine leakage rates through an open well as a function of wellbore and reservoir conditions. Results show that injection-induced pressure and reservoir gas saturation play important roles in controlling leakage. Caution must be used in the application of this ROM because well leakage is formally transient and the ROM lookup table was populated using quasi-steady simulation output after 1000 time steps which may correspond to different physical times for the various parameter combinations of the coupled wellbore-reservoir system.

  15. Frequency domain reduced order model of aligned-spin effective-one-body waveforms with generic mass ratios and spins

    Science.gov (United States)

    Pürrer, Michael

    2016-03-01

    I provide a frequency domain reduced order model (ROM) for the aligned-spin effective-one-body model "SEOBNRv2" for data analysis with second- and third-generation ground-based gravitational wave (GW) detectors. SEOBNRv2 models the dominant mode of the GWs emitted by the coalescence of black hole binaries. The large physical parameter space (dimensionless spins -1 ≤χi≤0.99 and symmetric mass ratios 0.01 ≤η ≤0.25 ) requires sophisticated reduced order modeling techniques, including patching in the parameter space and in frequency. I find that the time window over which the inspiral-plunge and the merger-ringdown waveform in SEOBNRv2 are connected has a discontinuous dependence on the parameters when the spin parameter χ =0.8 or the symmetric mass ratio η ˜0.083 . This discontinuity increases resolution requirements for the ROM. The ROM can be used for compact binary systems with total masses of 2 M⊙ or higher for the Advanced LIGO design sensitivity and a 10 Hz lower cutoff frequency. The ROM has a worst mismatch against SEOBNRv2 of ˜1 %, but in general mismatches are better than ˜0.1 %. The ROM is crucial for key data analysis applications for compact binaries, such as GW searches and parameter estimation carried out within the LIGO Scientific Collaboration.

  16. National Energy Outlook Modelling System

    Energy Technology Data Exchange (ETDEWEB)

    Volkers, C.M. [ECN Policy Studies, Petten (Netherlands)

    2013-12-15

    For over 20 years, the Energy research Centre of the Netherlands (ECN) has been developing the National Energy Outlook Modelling System (NEOMS) for Energy projections and policy evaluations. NEOMS enables 12 energy models of ECN to exchange data and produce consistent and detailed results.

  17. ABSTRACT MODELS FOR SYSTEM VIRTUALIZATION

    Directory of Open Access Journals (Sweden)

    M. G. Koveshnikov

    2015-05-01

    Full Text Available The paper is dedicated to issues of system objects securing (system files and user system or application configuration files against unauthorized access including denial of service attacks. We have suggested the method and developed abstract system virtualization models, which are used toresearch attack scenarios for different virtualization modes. Estimation for system tools virtualization technology effectiveness is given. Suggested technology is based on redirection of access requests to system objects shared among access subjects. Whole and partial system virtualization modes have been modeled. The difference between them is the following: in the whole virtualization mode all copies of access system objects are created whereon subjects’ requests are redirected including corresponding application objects;in the partial virtualization mode corresponding copies are created only for part of a system, for example, only system objects for applications. Alternative solutions effectiveness is valued relating to different attack scenarios. We consider proprietary and approved technical solution which implements system virtualization method for Microsoft Windows OS family. Administrative simplicity and capabilities of correspondingly designed system objects security tools are illustrated on this example. Practical significance of the suggested security method has been confirmed.

  18. Design and Implementation of a Multimedia CD-ROM-Based Directed Study Preservice Teacher Education Course.

    Science.gov (United States)

    Morse, Timothy

    This paper discusses the development and implementation of a computer-based directed study preservice teacher education course. Specifically, it explains the procedures followed to create the ten multimedia CD-ROMs that comprise the course, and how preservice teachers use the CD-ROMs. Topics to be covered include (1) rationale for course creation;…

  19. Evaluation of Two CD-ROMs from a Series on Cell Biology

    Science.gov (United States)

    Sander, Uwe; Kerlen, Gertraude; Steinke, Mattias; Huk, Thomas; Floto, Christian

    2003-01-01

    Two CD-ROMs from a series dealing with various major aspects of cell biology are evaluated in this paper using quantitative and qualitative approaches. The findings delimit similarities and differences of the two CD-ROMs and shed light on how the programs could be used in the learning process and how they should not be. The overall impression, as…

  20. Evaluation of constipation in older adults: radioopaque markers (ROMs) versus wireless motility capsule (WMC).

    Science.gov (United States)

    Rao, S S C; Coss-Adame, E; Valestin, J; Mysore, K

    2012-01-01

    There is scarce information regarding assessment of constipation in older subjects. We examined regional and whole-gut transit time (WGTT) with wireless motility capsule (WMC) and compared this with radioopaque markers (ROM) transit. 39 constipated and 11 healthy older subjects (≥ 65 years) ingested a ROM capsule and WMC, wore a data receiver and kept stool diaries for 5 days. WMC recordings were analyzed for colonic transit time (CTT), WGTT and gastric emptying time (GET). Radiographs obtained on day 5 assessed ROM transit. Results for each device were compared. The CTT (p = ROM colonic transit was also slower (p = ROM). Device agreement for slow colonic transit was 88% with good correlation between WMC and ROM (CTT r=0.718, p=0.0001, WGTT r=0.693, p=0.0001). Slow transit constipation was identified in 28% with ROM and 32% with WMC. No adverse events were recorded. WMC is a safe and useful device that provides objective diagnosis of delayed colonic and whole gut transit in older constipated adults. It is a radiation-free, physiologic and ambulatory technique that provides additional diagnostic information than ROM.

  1. Independent Reading of CD-ROM Storybooks: Measuring Comprehension with Oral Retellings

    Science.gov (United States)

    Pearman, Cathy J.

    2008-01-01

    CD-ROM storybooks may facilitate reading comprehension for students who are struggling with reading comprehension. Therefore, the use of CD-ROM storybooks in the classroom as part of a reading instruction program, literacy center, or for independent reading time could benefit young readers. (Contains 2 tables and 1 figure.)

  2. CD-ROMs review 1995-1997: a multicentre pilot trial.

    Science.gov (United States)

    Grey-Lloyd, J

    1998-03-01

    This article describes an evaluation of CD-ROMs carried out at four NHS Trust Libraries in Wales. It covers interactive CD-ROMs which take the form of either computer assisted learning programs, encyclopaedia or well-known text books.

  3. Qanimarisaj Qano'jib'alil--Engrandezcamos Nuestro Pensamiento (Let's Broaden Our Thinking). [CD-ROM].

    Science.gov (United States)

    Academy for Educational Development, Washington, DC.

    This CD-ROM is part of an interactive and dynamic multimedia package of information and games for learning K'iche' and Ixil. The CD-ROMs help bilingual pre-service teachers improve their reading, writing, and listening comprehension skills in their own Mayan language. After a musical and colorful introduction, users may choose introductions to…

  4. Qanimarisaj Qano'jib'alil--Engrandezcamos Nuestro Pensamiento (Let's Broaden Our Thinking). [CD-ROM].

    Science.gov (United States)

    Academy for Educational Development, Washington, DC.

    This CD-ROM is part of an interactive and dynamic multimedia package of information and games for learning K'iche' and Ixil. The CD-ROMs help bilingual pre-service teachers improve their reading, writing, and listening comprehension skills in their own Mayan language. After a musical and colorful introduction, users may choose introductions to…

  5. NODC Standard Product: NODC Taxonomic Code on CD-ROM (NODC Accession 0050418)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The content of the NODC Taxonomic Code, Version 8 CD-ROM (CD-ROM NODC-68) distributed by NODC is archived in this accession. Version 7 of the NODC Taxonomic Code...

  6. Type 1 Diabetes in Children: A Passport to Knowledge. [CD-ROM].

    Science.gov (United States)

    2001

    This educational CD-ROM is designed to provide a working knowledge of diabetes and its effect on children. It is intended for parents, health care professionals, pharmacists, teachers, coaches, and child care providers. The CD-ROM examines issues related to diabetes management (food, insulin, monitoring, hypoglycemia, and illness); lifestyle; and…

  7. Keys to Successful Publishing of Technical Documentation on CD-ROM.

    Science.gov (United States)

    Kersten, Amy

    1992-01-01

    Discusses softcopy information publishing on CD-ROM and describes how to use it successfully for technical documentation. Four main areas are addressed: (1) characteristics of technical documentation; (2) goals for the information product, including access methods; (3) steps involved in publishing technical documentation on CD-ROM, including…

  8. Type 1 Diabetes in Children: A Passport to Knowledge. [CD-ROM].

    Science.gov (United States)

    2001

    This educational CD-ROM is designed to provide a working knowledge of diabetes and its effect on children. It is intended for parents, health care professionals, pharmacists, teachers, coaches, and child care providers. The CD-ROM examines issues related to diabetes management (food, insulin, monitoring, hypoglycemia, and illness); lifestyle; and…

  9. Reta'maxik Qatzij--Conociendo Nuestro Idioma (Knowing Our Language). [CD-ROM].

    Science.gov (United States)

    Academy for Educational Development, Washington, DC.

    This CD-ROM is part of an interactive and dynamic multimedia package of information and games for learning K'iche' and Ixil. This CD-ROM includes six books in electronic format with interactive exercises that support improved bilingual and intercultural education and teacher training, specifically in the languages of K'iche' and Ixil. Books…

  10. Undergraduate Use of CD-ROM Databases: Observations of Human-Computer Interaction and Relevance Judgments.

    Science.gov (United States)

    Shaw, Debora

    1996-01-01

    Describes a study that observed undergraduates as they searched bibliographic databases on a CD-ROM local area network. Topics include related research, information needs, evolution of search topics, database selection, search strategies, relevance judgments, CD-ROM interfaces, and library instruction. (Author/LRW)

  11. Reta'maxik Qatzij--Conociendo Nuestro Idioma (Knowing Our Language). [CD-ROM].

    Science.gov (United States)

    Academy for Educational Development, Washington, DC.

    This CD-ROM is part of an interactive and dynamic multimedia package of information and games for learning K'iche' and Ixil. This CD-ROM includes six books in electronic format with interactive exercises that support improved bilingual and intercultural education and teacher training, specifically in the languages of K'iche' and Ixil. Books…

  12. Aerodynamic and Mechanical System Modelling

    DEFF Research Database (Denmark)

    Jørgensen, Martin Felix

    This thesis deals with mechanical multibody-systems applied to the drivetrain of a 500 kW wind turbine. Particular focus has been on gearbox modelling of wind turbines. The main part of the present project involved programming multibody systems to investigate the connection between forces, moments...

  13. Experimental Modeling of Dynamic Systems

    DEFF Research Database (Denmark)

    Knudsen, Morten Haack

    2006-01-01

    An engineering course, Simulation and Experimental Modeling, has been developed that is based on a method for direct estimation of physical parameters in dynamic systems. Compared with classical system identification, the method appears to be easier to understand, apply, and combine with physical...

  14. An extensible analysable system model

    DEFF Research Database (Denmark)

    Probst, Christian W.; Hansen, Rene Rydhof

    2008-01-01

    , this does not hold for real physical systems. Approaches such as threat modelling try to target the formalisation of the real-world domain, but still are far from the rigid techniques available in security research. Many currently available approaches to assurance of critical infrastructure security...... allows for easy development of analyses for the abstracted systems. We briefly present one application of our approach, namely the analysis of systems for potential insider threats....

  15. Educational use of World Wide Web pages on CD-ROM.

    Science.gov (United States)

    Engel, Thomas P; Smith, Michael

    2002-01-01

    The World Wide Web is increasingly important for medical education. Internet served pages may also be used on a local hard disk or CD-ROM without a network or server. This allows authors to reuse existing content and provide access to users without a network connection. CD-ROM offers several advantages over network delivery of Web pages for several applications. However, creating Web pages for CD-ROM requires careful planning. Issues include file names, relative links, directory names, default pages, server created content, image maps, other file types and embedded programming. With care, it is possible to create server based pages that can be copied directly to CD-ROM. In addition, Web pages on CD-ROM may reference Internet served pages to provide the best features of both methods.

  16. Modeling Multi-Level Systems

    CERN Document Server

    Iordache, Octavian

    2011-01-01

    This book is devoted to modeling of multi-level complex systems, a challenging domain for engineers, researchers and entrepreneurs, confronted with the transition from learning and adaptability to evolvability and autonomy for technologies, devices and problem solving methods. Chapter 1 introduces the multi-scale and multi-level systems and highlights their presence in different domains of science and technology. Methodologies as, random systems, non-Archimedean analysis, category theory and specific techniques as model categorification and integrative closure, are presented in chapter 2. Chapters 3 and 4 describe polystochastic models, PSM, and their developments. Categorical formulation of integrative closure offers the general PSM framework which serves as a flexible guideline for a large variety of multi-level modeling problems. Focusing on chemical engineering, pharmaceutical and environmental case studies, the chapters 5 to 8 analyze mixing, turbulent dispersion and entropy production for multi-scale sy...

  17. Reduced-Order Model for the Geochemical Impacts of Carbon Dioxide, Brine and Trace Metal Leakage into an Unconfined, Oxidizing Carbonate Aquifer, Version 2.1

    Energy Technology Data Exchange (ETDEWEB)

    Bacon, Diana H.

    2013-03-31

    The National Risk Assessment Partnership (NRAP) consists of 5 U.S DOE national laboratories collaborating to develop a framework for predicting the risks associated with carbon sequestration. The approach taken by NRAP is to divide the system into components, including injection target reservoirs, wellbores, natural pathways including faults and fractures, groundwater and the atmosphere. Next, develop a detailed, physics and chemistry-based model of each component. Using the results of the detailed models, develop efficient, simplified models, termed reduced order models (ROM) for each component. Finally, integrate the component ROMs into a system model that calculates risk profiles for the site. This report details the development of the Groundwater Geochemistry ROM for the Edwards Aquifer at PNNL. The Groundwater Geochemistry ROM for the Edwards Aquifer uses a Wellbore Leakage ROM developed at LANL as input. The detailed model, using the STOMP simulator, covers a 5x8 km area of the Edwards Aquifer near San Antonio, Texas. The model includes heterogeneous hydraulic properties, and equilibrium, kinetic and sorption reactions between groundwater, leaked CO2 gas, brine, and the aquifer carbonate and clay minerals. Latin Hypercube sampling was used to generate 1024 samples of input parameters. For each of these input samples, the STOMP simulator was used to predict the flux of CO2 to the atmosphere, and the volume, length and width of the aquifer where pH was less than the MCL standard, and TDS, arsenic, cadmium and lead exceeded MCL standards. In order to decouple the Wellbore Leakage ROM from the Groundwater Geochemistry ROM, the response surface was transformed to replace Wellbore Leakage ROM input parameters with instantaneous and cumulative CO2 and brine leakage rates. The most sensitive parameters proved to be the CO2 and brine leakage rates from the well, with equilibrium coefficients for calcite and dolomite, as well as the number of illite and kaolinite

  18. Distribution system modeling and analysis

    CERN Document Server

    Kersting, William H

    2002-01-01

    For decades, distribution engineers did not have the sophisticated tools developed for analyzing transmission systems-often they had only their instincts. Things have changed, and we now have computer programs that allow engineers to simulate, analyze, and optimize distribution systems. Powerful as these programs are, however, without a real understanding of the operating characteristics of a distribution system, engineers using the programs can easily make serious errors in their designs and operating procedures.Distribution System Modeling and Analysis helps prevent those errors. It gives re

  19. Stirling Engine Dynamic System Modeling

    Science.gov (United States)

    Nakis, Christopher G.

    2004-01-01

    The Thermo-Mechanical systems branch at the Glenn Research Center focuses a large amount time on Stirling engines. These engines will be used on missions where solar power is inefficient, especially in deep space. I work with Tim Regan and Ed Lewandowski who are currently developing and validating a mathematical model for the Stirling engines. This model incorporates all aspects of the system including, mechanical, electrical and thermodynamic components. Modeling is done through Simplorer, a program capable of running simulations of the model. Once created and then proven to be accurate, a model is used for developing new ideas for engine design. My largest specific project involves varying key parameters in the model and quantifying the results. This can all be done relatively trouble-free with the help of Simplorer. Once the model is complete, Simplorer will do all the necessary calculations. The more complicated part of this project is determining which parameters to vary. Finding key parameters depends on the potential for a value to be independently altered in the design. For example, a change in one dimension may lead to a proportional change to the rest of the model, and no real progress is made. Also, the ability for a changed value to have a substantial impact on the outputs of the system is important. Results will be condensed into graphs and tables with the purpose of better communication and understanding of the data. With the changing of these parameters, a more optimal design can be created without having to purchase or build any models. Also, hours and hours of results can be simulated in minutes. In the long run, using mathematical models can save time and money. Along with this project, I have many other smaller assignments throughout the summer. My main goal is to assist in the processes of model development, validation and testing.

  20. Model Development and Hindcast Simulations of NOAA’s Gulf of Maine Operational Forecast System

    Directory of Open Access Journals (Sweden)

    Zizang Yang

    2016-11-01

    Full Text Available The National Ocean Service (NOS of National Oceanic and Atmospheric Administration is developing an operational nowcast/forecast system for the Gulf of Maine (GoMOFS. The system aims to produce real-time nowcasts and short-range forecast guidance for water levels, 3-dimensional currents, water temperature, and salinity over the broad GoM region. GoMOFS will be implemented using the Regional Ocean Model System (ROMS. This paper describes the system setup and results from a one-year (2012 hindcast simulation. The hindcast performance was evaluated using the NOS standard skill assessment software. The results indicate favorable agreement between observations and model forecasts. The root-mean-squared errors are about 0.12 m for water level, less than 1.5 °C for temperature, less than 1.5 psu for salinity, and less than 0.2 m/s for currents. It is anticipated to complete the system development and the transition into operations in fiscal year 2017.

  1. A Correlative Study of CD-ROM Picture Books in Classrooms and School Children's Formation of Descriptive Concepts

    Science.gov (United States)

    Lu, Chow-Chin; Chen, Yueh-Yun; Chen, Chen-Wei

    2011-01-01

    The central focus of this study was the development, use and evaluation of CD-ROM picture books in elementary school science teaching. Three CD-ROM picture books based on the Campus Insects unit from the new elementary school science curriculum in Taiwan were developed. A quasi-experimental method was used to compare the use of the CD-ROMs and…

  2. Using Video and CD-ROM Technology in a Job Preference Inventory for Youth with Severe Disabilities.

    Science.gov (United States)

    Morgan, Robert L.; Gerity, Brent P.; Ellerd, David A.

    2000-01-01

    This article describes a motion video CD-ROM program designed to assist youth with severe disabilities in the selection of job preferences. Traditional vocational interest inventories for individuals with disabilities and video and CD-ROM career exploration programs for typical youth are presented, then the specialized CD-ROM program is described.…

  3. 东芝迷你型DVD-ROM/Video机

    Institute of Scientific and Technical Information of China (English)

    陈玮

    2001-01-01

    @@ 日前,日本东芝公司推出了一款迷你型MED300AS DVDROM/Video机.该机不仅是带有15cm 16:9液晶屏的掌上型DVD机,还是一款4倍速的DVD-ROM和24倍速的CD-ROM,既可以单独欣赏也可以与电脑连接,同时还是世界上第一款拥有D2 P-Scan输出端子的掌上型DVD机,不但内含3-2 Pull down还原处理功能,而且P-Scan视频信号还可切换为YPrPb或RGB的形式,可以与电视、投影机及PC显示器连接.

  4. Kinetic Modeling of Biological Systems

    Energy Technology Data Exchange (ETDEWEB)

    Resat, Haluk; Petzold, Linda; Pettigrew, Michel F.

    2009-04-21

    The dynamics of how its constituent components interact define the spatio-temporal response of a natural system to stimuli. Modeling the kinetics of the processes that represent a biophysical system has long been pursued with the aim of improving our understanding of the studied system. Due to the unique properties of biological systems, in addition to the usual difficulties faced in modeling the dynamics of physical or chemical systems, biological simulations encounter difficulties that result from intrinsic multiscale and stochastic nature of the biological processes. This chapter discusses the implications for simulation of models involving interacting species with very low copy numbers, which often occur in biological systems and give rise to significant relative fluctuations. The conditions necessitating the use of stochastic kinetic simulation methods and the mathematical foundations of the stochastic simulation algorithms are presented. How the well-organized structural hierarchies often seen in biological systems can lead to multiscale problems, and possible ways to address the encountered computational difficulties are discussed. We present the details of the existing kinetic simulation methods, and discuss their strengths and shortcomings. A list of the publicly available kinetic simulation tools and our reflections for future prospects are also provided.

  5. Provocarea Facebook pentru bibliotecile publice din România

    Directory of Open Access Journals (Sweden)

    Octavia-Luciana Madge

    2014-01-01

    Full Text Available Reţelele sociale şi-au câştigat rapid un loc în viaţa noastră şi în activitatea multor organizaţii şi instituţii publice şi private. La nivelul bibliotecilor, reţelele sociale şi-au demonstrat utilitatea şi rolul în calitate de instrumente de marketing pentru o mai bună comunicare cu utilizatorii. Bibliotecile publice din România au cunoscut în ultimul timp transformări mari în ceea ce priveşte modul de abordare a relaţiei cu utilizatorii şi îmbunătăţirea activităţii lor. Au lansat, de asemenea, o serie de noi servicii pentru a răspunde nevoilor comunităţii pe care o servesc şi pentru a atrage noi utilizatori. Implementarea şi utilizarea de noi aplicaţii precum reţelele de socializare online, mai exact Facebook, a fost una dintre aceste dezvoltări recente. Această lucrare analizează modul în care reţelele sociale sunt utilizate la nivelul bibliotecilor publice din România prin exemplul a trei biblioteci publice mari şi a modului în care aceste biblioteci îşi promovează serviciile prin intermediul reţelei Facebook.

  6. Executive Information Systems' Multidimensional Models

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available Executive Information Systems are design to improve the quality of strategic level of management in organization through a new type of technology and several techniques for extracting, transforming, processing, integrating and presenting data in such a way that the organizational knowledge filters can easily associate with this data and turn it into information for the organization. These technologies are known as Business Intelligence Tools. But in order to build analytic reports for Executive Information Systems (EIS in an organization we need to design a multidimensional model based on the business model from the organization. This paper presents some multidimensional models that can be used in EIS development and propose a new model that is suitable for strategic business requests.

  7. Numerical Modeling of Microelectrochemical Systems

    DEFF Research Database (Denmark)

    Adesokan, Bolaji James

    for the reactants in the bulk electrolyte that are traveling waves. The first paper presents the mathematical model which describes an electrochemical system and simulates an electroanalytical technique called cyclic voltammetry. The model is governed by a system of advection–diffusion equations with a nonlinear...... reaction term at the boundary. We investigate the effect of flow rates, scan rates, and concentration on the cyclic voltammetry. We establish that high flow rates lead to the reduced hysteresis in the cyclic voltammetry curves and increasing scan rates lead to more pronounced current peaks. The final part...... of the paper shows that the response current in a cyclic voltammetry increases proportionally to the electrolyte concentration. In the second paper we present an experiment of an electrochemical system in a microfluidc system and compare the result to the numerical solutions. We investigate how the position...

  8. East China Sea Storm Surge Modeling and Visualization System: The Typhoon Soulik Case

    Directory of Open Access Journals (Sweden)

    Zengan Deng

    2014-01-01

    Full Text Available East China Sea (ECS Storm Surge Modeling System (ESSMS is developed based on Regional Ocean Modeling System (ROMS. Case simulation is performed on the Typhoon Soulik, which landed on the coastal region of Fujian Province, China, at 6 pm of July 13, 2013. Modeling results show that the maximum tide level happened at 6 pm, which was also the landing time of Soulik. This accordance may lead to significant storm surge and water level rise in the coastal region. The water level variation induced by high winds of Soulik ranges from −0.1 to 0.15 m. Water level generally increases near the landing place, in particular on the left hand side of the typhoon track. It is calculated that 0.15 m water level rise in this region can cause a submerge increase of ~0.2 km2, which could be catastrophic to the coastal environment and the living. Additionally, a Globe Visualization System (GVS is realized on the basis of World Wind to better provide users with the typhoon/storm surge information. The main functions of GVS include data indexing, browsing, analyzing, and visualization. GVS is capable of facilitating the precaution and mitigation of typhoon/storm surge in ESC in combination with ESSMS.

  9. Quark Model and multiquark system

    CERN Document Server

    da Silva, Cristiane Oldoni

    2010-01-01

    The discovery of many particles, especially in the 50's, when the firsts accelerators appeared, caused the searching for a model that would describe in a simple form the whole of known particles. The Quark Model, based in the mathematical structures of group theory, provided in the beginning of the 60's a simplified description of hadronic matter already known, proposing that three particles, called quarks, would originate all the observed hadrons. This model was able to preview the existence of particles that were later detected, confirming its consistency. Extensions of the Quark Model were made in the beginning of the 70's, focusing in describing observed particles that were excited states of the fundamental particles and others that presented new quantum numbers (flavors). Recently, exotic states as tetraquarks and pentaquarks types, also called multiquarks systems, previewed by the model, were observed, what renewed the interest in the way as quarks are confined inside the hadrons. In this article we pre...

  10. Reservoir and civil engineering geophysics (CD-Rom); Geophysique de gisement et de genie civil (CD-Rom)

    Energy Technology Data Exchange (ETDEWEB)

    Mari, J.L.; Chapellier, D.

    1999-07-01

    This CD-Rom is a pedagogical tool developed from the book 'field and civil engineering geophysics' (Technip ed., 1998). It presents the geophysical methods (surface and well geophysical surveys, radar surveys and well logging) and their application in the study of oil fields and also in civil engineering. Several cartoons illustrate the principle of methods, their domain of use and their limitations. It covers the following topics: surface seismic surveys (waves propagation, equipments, reflexion and refraction seismic surveys, surface waves); well seismic surveys (operation, data processing, imaging); well logging (acoustic, nuclear,electrical and others, methods of interpretation); radar surveys (principle, surface, wells, possibilities and limitations). (J.S.)

  11. A numerical study on seasonal variations of the thermocline in the South China Sea based on the ROMS

    Institute of Scientific and Technical Information of China (English)

    FAN Wei; SONG Jinbao; LI Shuang

    2014-01-01

    On the basis of the regional ocean modeling system (ROMS), the seasonal variations of the thermocline in the South China Sea (SCS) were numerically investigated. The simulated hydrodynamics are in accordance with previous studies:the circulation pattern in the SCS is cyclonic in winter and anticyclonic in summer, and such a change is mostly driven by the monsoon winds. The errors between the modeled temperature profiles and the observations obtained by cruises are quite small in the upper layers of the ocean, indicating that the ocean status is reasonably simulated. On the basis of the shapes of the vertical temperature profiles, five thermocline types (shallow thermocline, deep thermocline, hybrid thermocline, double thermocline, and multiple thermocline) are defined herein. In winter, when the northeasterly monsoon prevails, most shallow shelf seas in the northwest of the SCS are well mixed, and there is no obvious thermocline. The deep region generally has a deep thermocline, and the hybrid or double thermocline often occurs in the areas near the cold eddy in the south of the SCS. In summer, when the southwesterly monsoon prevails, the shelf sea area with a shallow thermocline greatly expands. The distribution of different thermocline types shows a relationship with ocean bathymetry:from shallow to deep waters, the thermocline types generally change from shallow or hybrid to deep thermocline, and the double or multiple thermocline usually occurs in the steep regions. The seasonal variations of the three major thermocline characteristics (the upper bound depth, thickness, and intensity) are also discussed. Since the SCS is also an area where tropical cyclones frequently occur, the response of thermocline to a typhoon process in a short time scale is also analyzed.

  12. GENERIC model for multiphase systems

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2010-01-01

    GENERIC is a nonequilibrium thermodynamic formalism in which the dynamic behavior of a system is described by a single compact equation involving two types of brackets: a Poisson bracket and a dissipative bracket. This formalism has proved to be a very powerful instrument to model the dynamic behavi

  13. Real-time solution of linear computational problems using databases of parametric reduced-order models with arbitrary underlying meshes

    Science.gov (United States)

    Amsallem, David; Tezaur, Radek; Farhat, Charbel

    2016-12-01

    A comprehensive approach for real-time computations using a database of parametric, linear, projection-based reduced-order models (ROMs) based on arbitrary underlying meshes is proposed. In the offline phase of this approach, the parameter space is sampled and linear ROMs defined by linear reduced operators are pre-computed at the sampled parameter points and stored. Then, these operators and associated ROMs are transformed into counterparts that satisfy a certain notion of consistency. In the online phase of this approach, a linear ROM is constructed in real-time at a queried but unsampled parameter point by interpolating the pre-computed linear reduced operators on matrix manifolds and therefore computing an interpolated linear ROM. The proposed overall model reduction framework is illustrated with two applications: a parametric inverse acoustic scattering problem associated with a mockup submarine, and a parametric flutter prediction problem associated with a wing-tank system. The second application is implemented on a mobile device, illustrating the capability of the proposed computational framework to operate in real-time.

  14. A multimedia CD-ROM tool to improve student understanding of bile salts and bilirubin metabolism: evaluation of its use in a medical hybrid PBL course.

    Science.gov (United States)

    Azer, Samy A

    2005-03-01

    participants. Students agreed that the PBL cases in the CD-ROM kept them engaged, were useful to their learning, and matched with the overall philosophy of the program. Compared with graduate-entry students (those with a prior university degree), school leavers (those with no prior university degree) showed a more positive attitude toward the PBL cases included in the multimedia CD-ROM and agreed that cases kept them engaged (P = 0.033). Students who completed the test after using the multimedia CD-ROM scored higher compared with those who completed the test before using the multimedia CD-ROM (P < 0.001). In conclusion, using bile salts, bilirubin metabolism, and their hepatobiliary transport as an example, the incorporation of a multimedia CD-ROM into the first-year medical course has the potential to improve student understanding of the main concepts in a variety of body systems.

  15. Cotangent Models for Integrable Systems

    Science.gov (United States)

    Kiesenhofer, Anna; Miranda, Eva

    2017-03-01

    We associate cotangent models to a neighbourhood of a Liouville torus in symplectic and Poisson manifolds focusing on b-Poisson/ b-symplectic manifolds. The semilocal equivalence with such models uses the corresponding action-angle theorems in these settings: the theorem of Liouville-Mineur-Arnold for symplectic manifolds and an action-angle theorem for regular Liouville tori in Poisson manifolds (Laurent- Gengoux et al., IntMath Res Notices IMRN 8: 1839-1869, 2011). Our models comprise regular Liouville tori of Poisson manifolds but also consider the Liouville tori on the singular locus of a b-Poisson manifold. For this latter class of Poisson structures we define a twisted cotangent model. The equivalence with this twisted cotangent model is given by an action-angle theorem recently proved by the authors and Scott (Math. Pures Appl. (9) 105(1):66-85, 2016). This viewpoint of cotangent models provides a new machinery to construct examples of integrable systems, which are especially valuable in the b-symplectic case where not many sources of examples are known. At the end of the paper we introduce non-degenerate singularities as lifted cotangent models on b-symplectic manifolds and discuss some generalizations of these models to general Poisson manifolds.

  16. La presencia de la arquitectura: la arquitectura románica del Valle del rio Sousa

    OpenAIRE

    Malheiro, Davide Miguel Guimarães

    2012-01-01

    Esta tesis doctoral ha pretendido ampliar el conocimiento de la arquitectura románica en Portugal, a través de un nuevo enfoque, y tiene como tema el estudio, análisis y documentación de veintiún monumentos románicos que constituyen la Ruta del Románico del Valle de Sousa, que fueron configurando la región y su paisaje desde la Edad Media, reflejando sobre las intenciones estéticas que están subyacentes a esas arquitecturas, abordando los temas, contenidos y conceptos que consideramos relevan...

  17. Dea Computrix - another deity for the Roman Pantheon? Journeys in the Roman Empire CD-Rom

    Directory of Open Access Journals (Sweden)

    T. Sam N. Moorhead

    2002-08-01

    Full Text Available This article outlines a personal view on the content and production of a CD-Rom on the Roman world produced by The British Museum, Channel 4, Verulamium Museum and Braunarts: Journeys in the Roman Empire. I discuss some of the benefits of and problems with multimedia production and outline feedback from various evaluation projects of the CD-Rom. I also briefly discuss the future of CD-Roms in the face of a rapidly expanding internet with reference to other multimedia projects at The British Museum.

  18. INTEGRATED HYDROGEN STORAGE SYSTEM MODEL

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, B

    2007-11-16

    Hydrogen storage is recognized as a key technical hurdle that must be overcome for the realization of hydrogen powered vehicles. Metal hydrides and their doped variants have shown great promise as a storage material and significant advances have been made with this technology. In any practical storage system the rate of H2 uptake will be governed by all processes that affect the rate of mass transport through the bed and into the particles. These coupled processes include heat and mass transfer as well as chemical kinetics and equilibrium. However, with few exceptions, studies of metal hydrides have focused primarily on fundamental properties associated with hydrogen storage capacity and kinetics. A full understanding of the complex interplay of physical processes that occur during the charging and discharging of a practical storage system requires models that integrate the salient phenomena. For example, in the case of sodium alanate, the size of NaAlH4 crystals is on the order of 300nm and the size of polycrystalline particles may be approximately 10 times larger ({approx}3,000nm). For the bed volume to be as small as possible, it is necessary to densely pack the hydride particles. Even so, in packed beds composed of NaAlH{sub 4} particles alone, it has been observed that the void fraction is still approximately 50-60%. Because of the large void fraction and particle to particle thermal contact resistance, the thermal conductivity of the hydride is very low, on the order of 0.2 W/m-{sup o}C, Gross, Majzoub, Thomas and Sandrock [2002]. The chemical reaction for hydrogen loading is exothermic. Based on the data in Gross [2003], on the order of 10{sup 8}J of heat of is released for the uptake of 5 kg of H{sub 2}2 and complete conversion of NaH to NaAlH{sub 4}. Since the hydride reaction transitions from hydrogen loading to discharge at elevated temperatures, it is essential to control the temperature of the bed. However, the low thermal conductivity of the hydride

  19. Two-way nesting in split-explicit ocean models: Algorithms, implementation and validation

    Science.gov (United States)

    Debreu, Laurent; Marchesiello, Patrick; Penven, Pierrick; Cambon, Gildas

    2012-06-01

    A full two-way nesting approach for split-explicit, free surface ocean models is presented. It is novel in three main respects: the treatment of grid refinement at the fast mode (barotropic) level; the use of scale selective update schemes; the conservation of both volume and tracer contents via refluxing. An idealized application to vortex propagation on a β plane shows agreement between nested and high resolution solutions. A realistic application to the California Current System then confirm these results in a complex configuration. The selected algorithm is now part of ROMS_AGRIF. It is fully consistent with ROMS parallel capabilities on both shared and distributed memory architectures. The nesting implementation authorizes several nesting levels and several grids at any particular level. This operational capability, combined with the inner qualities of our two-way nesting algorithm and generally high-order accuracy of ROMS numerics, allow for realistic simulation of coastal and ocean dynamics at multiple, interacting scales.

  20. Modelling the upwelling offthe east Hainan Island coast in summer 2010

    Science.gov (United States)

    Bai, Peng; Gu, Yanzhen; Li, Peiliang; Wu, Kejian

    2016-11-01

    A synoptic-scale upwelling event that developed offthe east coast of the Hainan Island (EHIU) in the summer of 2010 is defined well via processing the Moderate Resolution Imaging Spectroradiometer (MODIS) sea surface temperature (SST) data. The Regional Ocean Modeling System (ROMS) with high spatial resolution has been used to investigate this upwelling event. By comparing the ROMS results against tide station data, Argo float profiles and MODIS SST, it is confirmed that the ROMS reproduces the EHIU well. The cooler-water core (CWC) distinguished by waters wind stress curl that dominated the east Qiongzhou Strait mouth area suppressed the intensity of the CWC by 0.2-0.4°C. Further, nonlinear interaction between tidal currents and wind stress enhanced vertical mixing greatly, which would benefit the development of the CWC.

  1. Probabilistic models for feedback systems.

    Energy Technology Data Exchange (ETDEWEB)

    Grace, Matthew D.; Boggs, Paul T.

    2011-02-01

    In previous work, we developed a Bayesian-based methodology to analyze the reliability of hierarchical systems. The output of the procedure is a statistical distribution of the reliability, thus allowing many questions to be answered. The principal advantage of the approach is that along with an estimate of the reliability, we also can provide statements of confidence in the results. The model is quite general in that it allows general representations of all of the distributions involved, it incorporates prior knowledge into the models, it allows errors in the 'engineered' nodes of a system to be determined by the data, and leads to the ability to determine optimal testing strategies. In this report, we provide the preliminary steps necessary to extend this approach to systems with feedback. Feedback is an essential component of 'complexity' and provides interesting challenges in modeling the time-dependent action of a feedback loop. We provide a mechanism for doing this and analyze a simple case. We then consider some extensions to more interesting examples with local control affecting the entire system. Finally, a discussion of the status of the research is also included.

  2. Modeling Advance Life Support Systems

    Science.gov (United States)

    Pitts, Marvin; Sager, John; Loader, Coleen; Drysdale, Alan

    1996-01-01

    Activities this summer consisted of two projects that involved computer simulation of bioregenerative life support systems for space habitats. Students in the Space Life Science Training Program (SLSTP) used the simulation, space station, to learn about relationships between humans, fish, plants, and microorganisms in a closed environment. One student complete a six week project to modify the simulation by converting the microbes from anaerobic to aerobic, and then balancing the simulation's life support system. A detailed computer simulation of a closed lunar station using bioregenerative life support was attempted, but there was not enough known about system restraints and constants in plant growth, bioreactor design for space habitats and food preparation to develop an integrated model with any confidence. Instead of a completed detailed model with broad assumptions concerning the unknown system parameters, a framework for an integrated model was outlined and work begun on plant and bioreactor simulations. The NASA sponsors and the summer Fell were satisfied with the progress made during the 10 weeks, and we have planned future cooperative work.

  3. Minisuperspace models of discrete systems

    CERN Document Server

    Baytaş, Bekir

    2016-01-01

    A discrete quantum spin system is presented in which several modern methods of canonical quantum gravity can be tested with promising results. In particular, features of interacting dynamics are analyzed with an emphasis on homogeneous configurations and the dynamical building-up and stability of long-range correlations. Different types of homogeneous minisuperspace models are introduced for the system, including one based on condensate states, and shown to capture different aspects of the discrete system. They are evaluated with effective methods and by means of continuum limits, showing good agreement with operator calculations whenever the latter are available. As a possibly quite general result, it is concluded that an analysis of the building-up of long-range correlations in discrete systems requires non-perturbative solutions of the dynamical equations. Some questions related to stability can be analyzed perturbatively, but suggest that matter couplings may be relevant for this question in the context o...

  4. Numerical model of the circulation and dispersion in the east Adriatic coastal waters

    Science.gov (United States)

    Beg Paklar, Gordana; Dzoic, Tomislav; Koracin, Darko; Matijevic, Slavica; Grbec, Branka; Ivatek-Sahdan, Stjepan

    2017-04-01

    The Regional Ocean Modeling System (ROMS) was implemented to reproduce physical properties of the area around submarine outlet Stobrec in the middle Adriatic coastal area. ROMS model run was forced with realistic atmospheric fields obtained from meteorological model Aladin, climatological river discharges, tides and dynamics of the surrounding area imposed at the open boundaries. Atmospheric forcing included momentum, heat and water fluxes calculated interactively from the Aladin surface fields during ROMS model simulations. Simulated fields from the Adriatic and shelf scale models were used to prescribe the initial and open boundary conditions for fine resolution coastal domain. Model results were compared with available CTD measurements and discussed in the light of the climatological circulation and thermohaline properties of the middle Adriatic coastal area. Variability in the circulation is related to the prevailing atmospheric conditions, changes in the hydrological conditions and water mass exchange at the open boundaries. Basic features of the coastal circulation are well reproduced by the ROMS model, as well as temperatures and salinities which are within corresponding seasonal intervals, although with lower stratification than measured ones. In order to reproduce dispersion of the passive tracer the ROMS model was coupled with Lagrangian dispersion model. Multiyear monitoring of the physical, chemical and biological parameters around the sewage outlet was used to assess the quality of the dispersion model results. Among measured parameters, redox potential of the surface sediment layer was selected to be compared with model results as its negative values are direct consequence of increased organic matter input that can be attributed to the sewage system inflow.

  5. Review of World of Money CD-ROM for PC/Mac [CD-ROM

    Directory of Open Access Journals (Sweden)

    Philip de Jersey

    1998-12-01

    Full Text Available Following on from the impressive development of the new HSBC Money Gallery in 1997, the British Museum has launched into the world of electronic publishing with the World of Money, an "interactive exploration of money worldwide from ancient times to the present day". Intended for ages ten to adult, the CD promises "a mine of information about the use, form, history and importance of money around the globe", and "fun and information for all the family". Reviewing in a Mac-unfriendly environment, I have been able to run the CD only on a PC. On a 166Mhz MMX with 32Mb RAM and a 12x CD it runs impressively quickly, with no more than two or three seconds of the "loading new page" display when switching between different parts of the program. Minimum requirements are listed as a 486 with 8Mb RAM, 40Mb free hard disk space, Windows 3.11 or Windows 95, 4x CD drive, 1Mb 256 colours graphics card, 16-bit Sound Blaster compatible sound card, and a VGA monitor. Minimum requirements for the Mac are listed as System 7, 603e processor, 16Mb RAM, 40MB free hard disk space, 6x CD drive, 1Mb video card and Apple monitor or Multisync with adaptor. The CD opens with an image of the British Museum portico, through which we are taken into the foyer, complete with the sound effects of massed ranks of tourists. We have four options available on a lectern, or by turning left, right or going upstairs: History of Money, Information Centre, Activities, and Options. Clicking on a large question mark brings up the Help screens (Figure 1.

  6. Construction of energy-stable Galerkin reduced order models.

    Energy Technology Data Exchange (ETDEWEB)

    Kalashnikova, Irina; Barone, Matthew Franklin; Arunajatesan, Srinivasan; van Bloemen Waanders, Bart Gustaaf

    2013-05-01

    This report aims to unify several approaches for building stable projection-based reduced order models (ROMs). Attention is focused on linear time-invariant (LTI) systems. The model reduction procedure consists of two steps: the computation of a reduced basis, and the projection of the governing partial differential equations (PDEs) onto this reduced basis. Two kinds of reduced bases are considered: the proper orthogonal decomposition (POD) basis and the balanced truncation basis. The projection step of the model reduction can be done in two ways: via continuous projection or via discrete projection. First, an approach for building energy-stable Galerkin ROMs for linear hyperbolic or incompletely parabolic systems of PDEs using continuous projection is proposed. The idea is to apply to the set of PDEs a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The resulting ROM will be energy-stable for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special weighted L2 inner product, termed the %E2%80%9Csymmetry inner product%E2%80%9D. Attention is then turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, a weighted L2 inner product termed the %E2%80%9CLyapunov inner product%E2%80%9D, is derived. The weighting matrix that defines the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system arising from the discretization of a system of PDEs in space. It is shown that a ROM constructed via discrete projection using the Lyapunov inner product will be energy-stable for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. Comparisons are also made between the symmetry inner product and the Lyapunov inner product. The performance of ROMs constructed

  7. The Control System Modeling Language

    CERN Document Server

    Zagar, K; Sekoranja, M; Tkacik, G; Vodovnik, A; Zagar, Klemen; Plesko, Mark; Sekoranja, Matej; Tkacik, Gasper; Vodovnik, Anze

    2001-01-01

    The well-known Unified Modeling Language (UML) describes software entities, such as interfaces, classes, operations and attributes, as well as relationships among them, e.g. inheritance, containment and dependency. The power of UML lies in Computer Aided Software Engineering (CASE) tools such as Rational Rose, which are also capable of generating software structures from visual object definitions and relations. UML also allows add-ons that define specific structures and patterns in order to steer and automate the design process. We have developed an add-on called Control System Modeling Language (CSML). It introduces entities and relationships that we know from control systems, such as "property" representing a single controllable point/channel, or an "event" specifying that a device is capable of notifying its clients through events. Entities can also possess CSML-specific characteristics, such as physical units and valid ranges for input parameters. CSML is independent of any specific language or technology...

  8. Contextual Modelling of Collaboration System

    Directory of Open Access Journals (Sweden)

    Wafaa DACHRY

    2012-03-01

    Full Text Available Faced with new environmental constraints, firms decide to collaborate in collective entities and adopt new patterns of behavior. So, this firms’ collaboration becomes an unavoidable approach. Indeed, our aim interest in our study is to propose a collaborative information system for supply chain. Our proposed platform ensures cooperation and information sharing between partners in real time. In fact, several questions have to be asked: What is the information nature may be shared between partners? What processes are implemented between actors? What functional services are supported by the platform? In order to answer these questions, we present, in this article, our methodological approach of modelling, called CMCS (Contextual Modelling of Collaborative System

  9. [CD-ROM and pharmacy: a new means of accessing information. I. Characteristics and analysis of CD-ROMs of interest to pharmacy].

    Science.gov (United States)

    Couvreux, J; Bador, P; Locher, F

    1995-01-01

    CD-ROMs represent a new data medium which is not used enough by health professionals. This survey aimed to list current CD-ROMs useful in pharmacy field with their main characteristics. Thus, databases and directories from health information providers were consulted. A database was then made in order to exploit data collected as well as possible. The following section detailed the results of the survey: 205 CD-ROMs were selected, 95% are bibliographic or full-text data, 94% use English language, 84% present international information, 82% allow us previous years information retrieval, 65% are updated at least every three months, 97% work on PC computers, 74% are provided by american companies.

  10. Moving Towards Dynamic Ocean Management: How Well Do Modeled Ocean Products Predict Species Distributions?

    Directory of Open Access Journals (Sweden)

    Elizabeth A. Becker

    2016-02-01

    Full Text Available Species distribution models are now widely used in conservation and management to predict suitable habitat for protected marine species. The primary sources of dynamic habitat data have been in situ and remotely sensed oceanic variables (both are considered “measured data”, but now ocean models can provide historical estimates and forecast predictions of relevant habitat variables such as temperature, salinity, and mixed layer depth. To assess the performance of modeled ocean data in species distribution models, we present a case study for cetaceans that compares models based on output from a data assimilative implementation of the Regional Ocean Modeling System (ROMS to those based on measured data. Specifically, we used seven years of cetacean line-transect survey data collected between 1991 and 2009 to develop predictive habitat-based models of cetacean density for 11 species in the California Current Ecosystem. Two different generalized additive models were compared: one built with a full suite of ROMS output and another built with a full suite of measured data. Model performance was assessed using the percentage of explained deviance, root mean squared error (RMSE, observed to predicted density ratios, and visual inspection of predicted and observed distributions. Predicted distribution patterns were similar for models using ROMS output and measured data, and showed good concordance between observed sightings and model predictions. Quantitative measures of predictive ability were also similar between model types, and RMSE values were almost identical. The overall demonstrated success of the ROMS-based models opens new opportunities for dynamic species management and biodiversity monitoring because ROMS output is available in near real time and can be forecast.

  11. Stochastic Models of Polymer Systems

    Science.gov (United States)

    2016-01-01

    field limit of a dynamical model for polymer systems, Science China Mathematics , (11 2012): 0. doi: TOTAL: 1 Number of Non Peer-Reviewed Conference...4.0 (4.0 max scale): Number of graduating undergraduates funded by a DoD funded Center of Excellence grant for Education , Research and Engineering...undergraduates funded by your agreement who graduated during this period and will receive scholarships or fellowships for further studies in science

  12. Land and Marine Gravity Data on CD-ROM - 1999 Edition

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Land and Marine Gravity 1999 Edition 2-volume CD-ROM set contains observed and derived land and marine gravity data contributed by many national and...

  13. Model reduction of parametrized systems

    CERN Document Server

    Ohlberger, Mario; Patera, Anthony; Rozza, Gianluigi; Urban, Karsten

    2017-01-01

    The special volume offers a global guide to new concepts and approaches concerning the following topics: reduced basis methods, proper orthogonal decomposition, proper generalized decomposition, approximation theory related to model reduction, learning theory and compressed sensing, stochastic and high-dimensional problems, system-theoretic methods, nonlinear model reduction, reduction of coupled problems/multiphysics, optimization and optimal control, state estimation and control, reduced order models and domain decomposition methods, Krylov-subspace and interpolatory methods, and applications to real industrial and complex problems. The book represents the state of the art in the development of reduced order methods. It contains contributions from internationally respected experts, guaranteeing a wide range of expertise and topics. Further, it reflects an important effor t, carried out over the last 12 years, to build a growing research community in this field. Though not a textbook, some of the chapters ca...

  14. Computational models of complex systems

    CERN Document Server

    Dabbaghian, Vahid

    2014-01-01

    Computational and mathematical models provide us with the opportunities to investigate the complexities of real world problems. They allow us to apply our best analytical methods to define problems in a clearly mathematical manner and exhaustively test our solutions before committing expensive resources. This is made possible by assuming parameter(s) in a bounded environment, allowing for controllable experimentation, not always possible in live scenarios. For example, simulation of computational models allows the testing of theories in a manner that is both fundamentally deductive and experimental in nature. The main ingredients for such research ideas come from multiple disciplines and the importance of interdisciplinary research is well recognized by the scientific community. This book provides a window to the novel endeavours of the research communities to present their works by highlighting the value of computational modelling as a research tool when investigating complex systems. We hope that the reader...

  15. Computer Based Radiation Protection- A New Cd-Rom

    Energy Technology Data Exchange (ETDEWEB)

    Geringer, T.; Bammer, M.; Ablber, M.

    2004-07-01

    Within the next few years, there'll be a lot of new challenges required from radiation protection. According to EU regulation[1] and the new austrian radiation protection law [2] regular additional training are requested. Patients protection in diagnostic and therapeutic usage of ionising radiation gains also more and more importance.[3] Not really surprisingly, the general population is definitely highly aware of the risks coming with the usage of radionuclides and x-rays in medicine. Furthermore, the nuclear power plant in Temelin, near the austrian border initiated a lively discussion about risks, necessity and use of ionising radiation in medicine and industry. It turned out to be a really hard job handling these topics in public. A brilliant didactics based on independent information and viewpoints was required. ARC Seibersdorf Research GmbH, represented by the department of medical technical applications and the radiation protection academy, developed an interactive CD-ROM covering several applications: Basics on radiation protection for medical and technical personnel ; preparation for a radiation protection training. Repetition of the main topics for graduates of a radiation protection training. Basics on radiation protection and emergency management for medical staff as well as for the general public. (Author)

  16. Identification and Modelling of Linear Dynamic Systems

    Directory of Open Access Journals (Sweden)

    Stanislav Kocur

    2006-01-01

    Full Text Available System identification and modelling are very important parts of system control theory. System control is only as good as good is created model of system. So this article deals with identification and modelling problems. There are simple classification and evolution of identification methods, and then the modelling problem is described. Rest of paper is devoted to two most known and used models of linear dynamic systems.

  17. A novel ROM compression architecture for DDFS utilizing the parabolic approximation of equi-section division.

    Science.gov (United States)

    Jeng, Shiann-Shiun; Lin, Hsing-Chen; Lin, Chi-Huei

    2012-12-01

    In this paper, we propose the parabolic approximation of equi-section division (PAESD) utilizing the symmetry property and amplitude approximation of a sinusoidal waveform to design a direct digital frequency synthesizer (DDFS). The sinusoidal phase of a one-quarter period is divided into equi-sections. The proposed method utilizes the curvature equivalence to derive each parabolic curve function, and then the value of the error function between each parabolic curve function and the sinusoidal function is stored in an error-compensation ROM to reconstruct the real sinusoidal waveform. The upper/lower bound of the maximum error value stored in the error-compensation ROM is derived to determine the minimum required memory word length relative to the number of bits of the equi-sections. Thus, the minimum size of the total ROMs of the DDFS using the PAESD without error-compensation ROM is compressed to 544 bits; the total compression ratio, compared with the minimum size of the total ROMs of the DDFS using the basic look-up table (LUT), is approximately 843:1, achieved by consuming additional circuits [71 adaptive look-up tables (ALUTs), 3 digital signal processor (DSP) block 9-bit elements]. Consequently, the results show that the proposed ROM compression method can effectively achieve a better compression ratio than the state-of-the-art solutions without affecting the spectrum performance of an average spurious-free dynamic range (SFDR) of -85 dBc.

  18. ISSM: Ice Sheet System Model

    Science.gov (United States)

    Larour, Eric; Schiermeier, John E.; Seroussi, Helene; Morlinghem, Mathieu

    2013-01-01

    In order to have the capability to use satellite data from its own missions to inform future sea-level rise projections, JPL needed a full-fledged ice-sheet/iceshelf flow model, capable of modeling the mass balance of Antarctica and Greenland into the near future. ISSM was developed with such a goal in mind, as a massively parallelized, multi-purpose finite-element framework dedicated to ice-sheet modeling. ISSM features unstructured meshes (Tria in 2D, and Penta in 3D) along with corresponding finite elements for both types of meshes. Each finite element can carry out diagnostic, prognostic, transient, thermal 3D, surface, and bed slope simulations. Anisotropic meshing enables adaptation of meshes to a certain metric, and the 2D Shelfy-Stream, 3D Blatter/Pattyn, and 3D Full-Stokes formulations capture the bulk of the ice-flow physics. These elements can be coupled together, based on the Arlequin method, so that on a large scale model such as Antarctica, each type of finite element is used in the most efficient manner. For each finite element referenced above, ISSM implements an adjoint. This adjoint can be used to carry out model inversions of unknown model parameters, typically ice rheology and basal drag at the ice/bedrock interface, using a metric such as the observed InSAR surface velocity. This data assimilation capability is crucial to allow spinning up of ice flow models using available satellite data. ISSM relies on the PETSc library for its vectors, matrices, and solvers. This allows ISSM to run efficiently on any parallel platform, whether shared or distrib- ISSM: Ice Sheet System Model NASA's Jet Propulsion Laboratory, Pasadena, California uted. It can run on the largest clusters, and is fully scalable. This allows ISSM to tackle models the size of continents. ISSM is embedded into MATLAB and Python, both open scientific platforms. This improves its outreach within the science community. It is entirely written in C/C++, which gives it flexibility in its

  19. Integrated Modeling for Flood Hazard Mapping Using Watershed Modeling System

    National Research Council Canada - National Science Library

    Seyedeh S. Sadrolashrafi; Thamer A. Mohamed; Ahmad R.B. Mahmud; Majid K. Kholghi; Amir Samadi

    2008-01-01

    ...) with the Watershed Modeling System (WMS) for flood modeling is developed. It also interconnects the terrain models and the GIS software, with commercial standard hydrological and hydraulic models, including HEC-1, HEC-RAS, etc...

  20. Accelerating transient simulation of linear reduced order models.

    Energy Technology Data Exchange (ETDEWEB)

    Thornquist, Heidi K.; Mei, Ting; Keiter, Eric Richard; Bond, Brad

    2011-10-01

    Model order reduction (MOR) techniques have been used to facilitate the analysis of dynamical systems for many years. Although existing model reduction techniques are capable of providing huge speedups in the frequency domain analysis (i.e. AC response) of linear systems, such speedups are often not obtained when performing transient analysis on the systems, particularly when coupled with other circuit components. Reduced system size, which is the ostensible goal of MOR methods, is often insufficient to improve transient simulation speed on realistic circuit problems. It can be shown that making the correct reduced order model (ROM) implementation choices is crucial to the practical application of MOR methods. In this report we investigate methods for accelerating the simulation of circuits containing ROM blocks using the circuit simulator Xyce.

  1. Impact of boundary regions on the interior circulation of the California Current System in a regional modeling framework

    Science.gov (United States)

    Veneziani, M.; Edwards, C.; Moore, A.

    2008-12-01

    We use the Regional Ocean Modeling System (ROMS) to model the circulation of the California Current System (CCS) using ECCO-GODAE products to force the model at the open boundaries of the domain. We investigate the impact that lateral boundary forcing (and the boundary region in general) has on particular metrics of the interior circulation by adopting both an adjoint model and a traditional sensitivity approach. Adjoint methods are naturally suited to sensitivity studies as they provide the direct dependencies of circulation metrics on uncertainties of the model initial conditions, surface and lateral external forcing, and model parameters, but their results are only valid within the time scale during which the linearity assumption underlying adjoint models can be considered to hold. More traditional sensitivity studies must be conducted to investigate longer time scales. We describe the adjoint model results for two metrics that represent the upwelling processes of the Central California region and the mean sea level field of the coastal circulation, respectively. The spatial distribution of the adjoint sensitivity fields allows us to quantify the contribution of the boundary regions over a biweekly time scale. We investigate longer time scales by adopting two methods: 1) apply different ECCO products at the open boundaries and evaluate mean stratification changes in the CalCOFI coastal region; 2) release passive tracers at the boundaries and calculate ventilation time scales and pathways from the boundary areas to the CCS interior.

  2. Preliminary results of assessing the mixing of wave transport flux residualin the upper ocean with ROMS

    Science.gov (United States)

    Shi, Yongfang; Wu, Kejian; Yang, Yongzeng

    2016-04-01

    The effects of the mixing of wave transport flux residual (Bvl) on the upper ocean is studied through carrying out the control run (CR) and a series of sensitive runs (SR) with ROMS model. In this study, the important role of Bvl is revealed by comparing the ocean temperature, statistical analysis of errors and evaluating the mixed layer depth. It is shown that the overestimated SST is improved effectively when the wave-induced mixing is incorporated to the vertical mixing scheme. As can be seen from the vertical structure of temperature 28°C isotherm changes from 20 min CR to 35 m in SR3, which is more close to the observation. Statistic analysis shows that the root-mean-square errors of the temperature in 10 m are reduced and the correlation between model results and observation data are increased after considering the effect of Bvl. The numerical results of the ocean temperature show improvement in summer and in tropical zones in winter, especially in the strong current regions in summer. In August the mixed layer depth (MLD) which is defined as the depth that the temperature has changed 0.5°C from the reference depth of 10 m is further analyzed. The simulation results have a close relationship with undetermined coefficient of Bvl, sensitivity studies show that a coefficient about 0.1 is reasonable value in the model.

  3. Network models in anatomical systems.

    Science.gov (United States)

    Esteve-Altava, Borja; Marugán-Lobón, Jesús; Botella, Héctor; Rasskin-Gutman, Diego

    2011-01-01

    Network theory has been extensively used to model the underlying structure of biological processes. From genetics to ecology, network thinking is changing our understanding of complex systems, specifically how their internal structure determines their overall behavior. Concepts such as hubs, scale-free or small-world networks, common in the complexity literature, are now used more and more in sociology, neurosciences, as well as other anthropological fields. Even though the use of network models is nowadays so widely applied, few attempts have been carried out to enrich our understanding in the classical morphological sciences such as in comparative anatomy or physical anthropology. The purpose of this article is to introduce the usage of network tools in morphology; specifically by building anatomical networks, dealing with the most common analyses and problems, and interpreting their outcome.

  4. Thermodynamic modeling of complex systems

    DEFF Research Database (Denmark)

    Liang, Xiaodong

    Offshore reservoirs represent one of the major growth areas of the oil and gas industry, and environmental safety is one of the biggest challenges for the offshore exploration and production. The oil accidents in the Gulf of Mexico in 1979 and 2010 were two of the biggest disasters in history...... after an oil spill. Engineering thermodynamics could be applied in the state-of-the-art sonar products through advanced artificial technology, if the speed of sound, solubility and density of oil-seawater systems could be satisfactorily modelled. The addition of methanol or glycols into unprocessed well...

  5. Models for Gaze Tracking Systems

    Directory of Open Access Journals (Sweden)

    Villanueva Arantxa

    2007-01-01

    Full Text Available One of the most confusing aspects that one meets when introducing oneself into gaze tracking technology is the wide variety, in terms of hardware equipment, of available systems that provide solutions to the same matter, that is, determining the point the subject is looking at. The calibration process permits generally adjusting nonintrusive trackers based on quite different hardware and image features to the subject. The negative aspect of this simple procedure is that it permits the system to work properly but at the expense of a lack of control over the intrinsic behavior of the tracker. The objective of the presented article is to overcome this obstacle to explore more deeply the elements of a video-oculographic system, that is, eye, camera, lighting, and so forth, from a purely mathematical and geometrical point of view. The main contribution is to find out the minimum number of hardware elements and image features that are needed to determine the point the subject is looking at. A model has been constructed based on pupil contour and multiple lighting, and successfully tested with real subjects. On the other hand, theoretical aspects of video-oculographic systems have been thoroughly reviewed in order to build a theoretical basis for further studies.

  6. Models for Gaze Tracking Systems

    Directory of Open Access Journals (Sweden)

    Arantxa Villanueva

    2007-10-01

    Full Text Available One of the most confusing aspects that one meets when introducing oneself into gaze tracking technology is the wide variety, in terms of hardware equipment, of available systems that provide solutions to the same matter, that is, determining the point the subject is looking at. The calibration process permits generally adjusting nonintrusive trackers based on quite different hardware and image features to the subject. The negative aspect of this simple procedure is that it permits the system to work properly but at the expense of a lack of control over the intrinsic behavior of the tracker. The objective of the presented article is to overcome this obstacle to explore more deeply the elements of a video-oculographic system, that is, eye, camera, lighting, and so forth, from a purely mathematical and geometrical point of view. The main contribution is to find out the minimum number of hardware elements and image features that are needed to determine the point the subject is looking at. A model has been constructed based on pupil contour and multiple lighting, and successfully tested with real subjects. On the other hand, theoretical aspects of video-oculographic systems have been thoroughly reviewed in order to build a theoretical basis for further studies.

  7. Area Logistics System Based on System Dynamics Model

    Institute of Scientific and Technical Information of China (English)

    GUI Shouping; ZHU Qiang; LU Lifang

    2005-01-01

    At present, there are few effective ways to analyze area logistics systems. This paper uses system dynamics to analyze the area logistics system and establishes a system dynamics model for the area logistics system based on the characteristics of the area logistics system and system dynamics. Numerical simulations with the system dynamic model were used to analyze a logistic system. Analysis of the Guangzhou economy shows that the model can reflect the actual state of the system objectively and can be used to make policy and harmonize environment.

  8. Evaluation of model simulated and MODIS-Aqua retrieved sea surface chlorophyll in the eastern Arabian Sea

    Science.gov (United States)

    Chakraborty, Kunal; Gupta, Anubhav; Lotliker, Aneesh A.; Tilstone, Gavin

    2016-11-01

    In this study we assess the accuracy of sea surface Chlorophyll-a (Chla) retrieved from satellite (MODIS-Aqua), using standard OC3M algorithm, and from a Regional Ocean Modelling System (ROMS) biophysical model against in situ data, measured in surface waters of the eastern Arabian Sea, from April 2009 to December 2012. MODIS-Aqua OC3M Chla concentrations showed a high correlation with the in situ data with slope close to unity and low root mean square error. In comparison, the ROMS model underestimated Chla, though the correlation was significant indicating that the model is capable of reproducing the trend in in situ Chla. Time Series trends in Chla were examined against wind driven Upwelling Indices (UIW) from April 2009 to December 2012 in north-eastern (Gujarat) and south-eastern (Kochi) coastal waters of the Arabian Sea. The annual peak in Chla along the Kochi coast during the summer monsoon was adequately captured by the model. It is well known that the peak in surface Chla along the Kochi and Gujarat coasts during the summer monsoon is the result of coastal upwelling, which the ROMS model was able to reproduce accurately. The maximum surface Chla along the Gujarat coast during the winter monsoon is due to convective mixing, which was also significantly captured by ROMS biophysical model. There was a lag of approximately one week between the maximum surface Chla and the peak in the Upwelling Index.

  9. What controls biological productivity in coastal upwelling systems? Insights from a comparative modeling study

    Science.gov (United States)

    Lachkar, Z.; Gruber, N.

    2011-06-01

    The magnitude of the biological productivity in Eastern Boundary Upwelling Systems (EBUS) is traditionally viewed as directly reflecting the upwelling intensity. Yet, different EBUS show different sensitivities of productivity to upwelling-favorable winds (Carr and Kearns, 2003). Here, using a comparative modeling study of the California Current System (California CS) and Canary Current System (Canary CS), we show how physical and environmental factors, such as light, temperature and cross-shore circulation modulate the response of biological productivity to upwelling strength. To this end, we made a series of eddy-resolving simulations of the California CS and Canary CS using the Regional Ocean Modeling System (ROMS), coupled to a nitrogen based Nutrient-Phytoplankton-Zooplankton-Detritus (NPZD) ecosystem model. We find the nutrient content of the euphotic zone to be 20 % smaller in the Canary CS relative to the California CS. Yet, the biological productivity is 50 % smaller in the latter. This is due to: (1) a faster nutrient-replete growth in the Canary CS relative to the California CS, related to a more favorable light and temperature conditions in the Canary CS, and (2) the longer nearshore water residence times in the Canary CS which lead to larger buildup of biomass in the upwelling zone, thereby enhancing the productivity. The longer residence times in the Canary CS appear to be associated with the wider continental shelves and the lower eddy activity characterizing this upwelling system. This results in a weaker offshore export of nutrients and organic matter, thereby increasing local nutrient recycling and enhancing the coupling between new and export production in the Northwest African system. Our results suggest that climate change induced perturbations such as upwelling favorable wind intensification might lead to contrasting biological responses in the California CS and the Canary CS, with major implications for the biogeochemical cycles and fisheries

  10. What controls biological productivity in coastal upwelling systems? Insights from a comparative modeling study

    Directory of Open Access Journals (Sweden)

    Z. Lachkar

    2011-06-01

    Full Text Available The magnitude of the biological productivity in Eastern Boundary Upwelling Systems (EBUS is traditionally viewed as directly reflecting the upwelling intensity. Yet, different EBUS show different sensitivities of productivity to upwelling-favorable winds (Carr and Kearns, 2003. Here, using a comparative modeling study of the California Current System (California CS and Canary Current System (Canary CS, we show how physical and environmental factors, such as light, temperature and cross-shore circulation modulate the response of biological productivity to upwelling strength. To this end, we made a series of eddy-resolving simulations of the California CS and Canary CS using the Regional Ocean Modeling System (ROMS, coupled to a nitrogen based Nutrient-Phytoplankton-Zooplankton-Detritus (NPZD ecosystem model. We find the nutrient content of the euphotic zone to be 20 % smaller in the Canary CS relative to the California CS. Yet, the biological productivity is 50 % smaller in the latter. This is due to: (1 a faster nutrient-replete growth in the Canary CS relative to the California CS, related to a more favorable light and temperature conditions in the Canary CS, and (2 the longer nearshore water residence times in the Canary CS which lead to larger buildup of biomass in the upwelling zone, thereby enhancing the productivity. The longer residence times in the Canary CS appear to be associated with the wider continental shelves and the lower eddy activity characterizing this upwelling system. This results in a weaker offshore export of nutrients and organic matter, thereby increasing local nutrient recycling and enhancing the coupling between new and export production in the Northwest African system. Our results suggest that climate change induced perturbations such as upwelling favorable wind intensification might lead to contrasting biological responses in the California CS and the Canary CS, with major implications for the biogeochemical cycles

  11. Enterprise Modelling supported by Manufacturing Systems Theory

    OpenAIRE

    MYKLEBUST, Odd

    2002-01-01

    There exist today a large number of enterprise models or enterprise modelling approaches. In a study of standards and project developed models there are two approaches: CIMOSA “The Open Systems Architecture for CIM” and GERAM, “Generalised Enterprise Reference Architecture”, which show a system orientation that can be further followed as interesting research topics for a system theory oriented approach for enterprise models. In the selection of system theories, manufacturing system theory...

  12. Modeling learning technology systems as business systems

    NARCIS (Netherlands)

    Avgeriou, Paris; Retalis, Symeon; Papaspyrou, Nikolaos

    2003-01-01

    The design of Learning Technology Systems, and the Software Systems that support them, is largely conducted on an intuitive, ad hoc basis, thus resulting in inefficient systems that defectively support the learning process. There is now justifiable, increasing effort in formalizing the engineering o

  13. Modeling learning technology systems as business systems

    NARCIS (Netherlands)

    Avgeriou, Paris; Retalis, Symeon; Papaspyrou, Nikolaos

    2003-01-01

    The design of Learning Technology Systems, and the Software Systems that support them, is largely conducted on an intuitive, ad hoc basis, thus resulting in inefficient systems that defectively support the learning process. There is now justifiable, increasing effort in formalizing the engineering

  14. Nonlinear System Identification and Behavioral Modeling

    CERN Document Server

    Huq, Kazi Mohammed Saidul; Kabir, A F M Sultanul

    2010-01-01

    The problem of determining a mathematical model for an unknown system by observing its input-output data pair is generally referred to as system identification. A behavioral model reproduces the required behavior of the original analyzed system, such as there is a one-to-one correspondence between the behavior of the original system and the simulated system. This paper presents nonlinear system identification and behavioral modeling using a work assignment.

  15. A View of Earth System Model Development

    Institute of Scientific and Technical Information of China (English)

    ZHOU Tianjun; YU Yongqiang; WANG Bin

    2009-01-01

    This paper gives a definition of earth system model and shows three development phases of it, including physical climate system model, earth climate system model, and earth system model, based on an inves-tigation of climate system models in the world. It provides an expatiation on the strategic significance of future development of earth system model, an introduction of some representative scientific research plans on development of earth system model home and abroad, and a review of its status and trends based on the models of the fourth assessment report (AR4) of the Intergovernmental Panel on Climate Change (IPCC).Some suggestions on future development of earth system model in China are given, which are expected to be helpful to advance the development.

  16. System identification application using Hammerstein model

    Indian Academy of Sciences (India)

    SABAN OZER; HASAN ZORLU; SELCUK METE

    2016-06-01

    Generally, memoryless polynomial nonlinear model for nonlinear part and finite impulse response (FIR) model or infinite impulse response model for linear part are preferred in Hammerstein models in literature. In this paper, system identification applications of Hammerstein model that is cascade of nonlinear second order volterra and linear FIR model are studied. Recursive least square algorithm is used to identify the proposed Hammerstein model parameters. Furthermore, the results are compared to identify the success of proposed Hammerstein model and different types of models

  17. Validation of newly designed regional earth system model (RegESM) for Mediterranean Basin

    Science.gov (United States)

    Turuncoglu, Ufuk Utku; Sannino, Gianmaria

    2017-05-01

    We present a validation analysis of a regional earth system model system (RegESM) for the Mediterranean Basin. The used configuration of the modeling system includes two active components: a regional climate model (RegCM4) and an ocean modeling system (ROMS). To assess the performance of the coupled modeling system in representing the climate of the basin, the results of the coupled simulation (C50E) are compared to the results obtained by a standalone atmospheric simulation (R50E) as well as several observation datasets. Although there is persistent cold bias in fall and winter, which is also seen in previous studies, the model reproduces the inter-annual variability and the seasonal cycles of sea surface temperature (SST) in a general good agreement with the available observations. The analysis of the near-surface wind distribution and the main circulation of the sea indicates that the coupled model can reproduce the main characteristics of the Mediterranean Sea surface and intermediate layer circulation as well as the seasonal variability of wind speed and direction when it is compared with the available observational datasets. The results also reveal that the simulated near-surface wind speed and direction have poor performance in the Gulf of Lion and surrounding regions that also affects the large positive SST bias in the region due to the insufficient horizontal resolution of the atmospheric component of the coupled modeling system. The simulated seasonal climatologies of the surface heat flux components are also consistent with the CORE.2 and NOCS datasets along with the overestimation in net long-wave radiation and latent heat flux (or evaporation, E), although a large observational uncertainty is found in these variables. Also, the coupled model tends to improve the latent heat flux by providing a better representation of the air-sea interaction as well as total heat flux budget over the sea. Both models are also able to reproduce the temporal evolution of

  18. Validation of newly designed regional earth system model (RegESM) for Mediterranean Basin

    Science.gov (United States)

    Turuncoglu, Ufuk Utku; Sannino, Gianmaria

    2016-06-01

    We present a validation analysis of a regional earth system model system (RegESM) for the Mediterranean Basin. The used configuration of the modeling system includes two active components: a regional climate model (RegCM4) and an ocean modeling system (ROMS). To assess the performance of the coupled modeling system in representing the climate of the basin, the results of the coupled simulation (C50E) are compared to the results obtained by a standalone atmospheric simulation (R50E) as well as several observation datasets. Although there is persistent cold bias in fall and winter, which is also seen in previous studies, the model reproduces the inter-annual variability and the seasonal cycles of sea surface temperature (SST) in a general good agreement with the available observations. The analysis of the near-surface wind distribution and the main circulation of the sea indicates that the coupled model can reproduce the main characteristics of the Mediterranean Sea surface and intermediate layer circulation as well as the seasonal variability of wind speed and direction when it is compared with the available observational datasets. The results also reveal that the simulated near-surface wind speed and direction have poor performance in the Gulf of Lion and surrounding regions that also affects the large positive SST bias in the region due to the insufficient horizontal resolution of the atmospheric component of the coupled modeling system. The simulated seasonal climatologies of the surface heat flux components are also consistent with the CORE.2 and NOCS datasets along with the overestimation in net long-wave radiation and latent heat flux (or evaporation, E), although a large observational uncertainty is found in these variables. Also, the coupled model tends to improve the latent heat flux by providing a better representation of the air-sea interaction as well as total heat flux budget over the sea. Both models are also able to reproduce the temporal evolution of

  19. Modeling of economic systems with Petri nets

    Directory of Open Access Journals (Sweden)

    Pavel Valeryevich Skorodumov

    2014-09-01

    Full Text Available Modeling is one of the most important tools to study complex systems. Components of both continuous and discrete nature are present in the behavior of contemporary economic systems. The article uses formalism of nested hybrid Petri nets as a tool to study complex economic systems. The author describes basic approaches of simulation modelling, concepts of classical Petri nets, modified means of nested hybrid Petri nets, benefits of their use for systems modeling. The article presents the concept of a universal system of simulation modeling. On the basis of considered approaches the article proposes to develop a universal system of simulation modeling on the basis of the modified machine Petri nets

  20. Different coupled atmosphere-recharge oscillator Low Order Models for ENSO: a projection approach.

    Science.gov (United States)

    Bianucci, Marco; Mannella, Riccardo; Merlino, Silvia; Olivieri, Andrea

    2016-04-01

    El Ninõ-Southern Oscillation (ENSO) is a large scale geophysical phenomenon where, according to the celebrated recharge oscillator model (ROM), the Ocean slow variables given by the East Pacific Sea Surface Temperature (SST) and the average thermocline depth (h), interact with some fast "irrelevant" ones, representing mostly the atmosphere (the westerly wind burst and the Madden-Julian Oscillation). The fast variables are usually inserted in the model as an external stochastic forcing. In a recent work (M. Bianucci, "Analytical probability density function for the statistics of the ENSO phenomenon: asymmetry and power law tail" Geophysical Research Letters, under press) the author, using a projection approach applied to general deterministic coupled systems, gives a physically reasonable explanation for the use of stochastic models for mimicking the apparent random features of the ENSO phenomenon. Moreover, in the same paper, assuming that the interaction between the ROM and the fast atmosphere is of multiplicative type, i.e., it depends on the SST variable, an analytical expression for the equilibrium density function of the anomaly SST is obtained. This expression fits well the data from observations, reproducing the asymmetry and the power law tail of the histograms of the NINÕ3 index. Here, using the same theoretical approach, we consider and discuss different kind of interactions between the ROM and the other perturbing variables, and we take into account also non linear ROM as a low order model for ENSO. The theoretical and numerical results are then compared with data from observations.

  1. Modeling Power Systems as Complex Adaptive Systems

    Energy Technology Data Exchange (ETDEWEB)

    Chassin, David P.; Malard, Joel M.; Posse, Christian; Gangopadhyaya, Asim; Lu, Ning; Katipamula, Srinivas; Mallow, J V.

    2004-12-30

    Physical analogs have shown considerable promise for understanding the behavior of complex adaptive systems, including macroeconomics, biological systems, social networks, and electric power markets. Many of today's most challenging technical and policy questions can be reduced to a distributed economic control problem. Indeed, economically based control of large-scale systems is founded on the conjecture that the price-based regulation (e.g., auctions, markets) results in an optimal allocation of resources and emergent optimal system control. This report explores the state-of-the-art physical analogs for understanding the behavior of some econophysical systems and deriving stable and robust control strategies for using them. We review and discuss applications of some analytic methods based on a thermodynamic metaphor, according to which the interplay between system entropy and conservation laws gives rise to intuitive and governing global properties of complex systems that cannot be otherwise understood. We apply these methods to the question of how power markets can be expected to behave under a variety of conditions.

  2. Neuman systems model in holland: an update.

    Science.gov (United States)

    Merks, André; Verberk, Frans; de Kuiper, Marlou; Lowry, Lois W

    2012-10-01

    The authors of this column, leading members of the International Neuman Systems Model Association, provide an update on the use of Neuman systems model in Holland and document the various changes in The Netherlands that have influenced the use of the model in that country. The model's link to systems theory and stress theory are discussed, as well as a shift to greater emphasis on patient self-management. The model is also linked to healthcare quality improvement and interprofessional collaboration in Holland.

  3. Data assimilation of physical and chlorophyll a observations in the California Current System using two biogeochemical models

    Science.gov (United States)

    Mattern, Jann Paul; Song, Hajoon; Edwards, Christopher A.; Moore, Andrew M.; Fiechter, Jerome

    2017-01-01

    Biogeochemical numerical models coupled to physical ocean circulation models are commonly combined with data assimilation in order to improve the models' state or parameter estimates. Yet much still needs to be learned about important aspects of biogeochemical data assimilation, such as the effect of model complexity and the importance of more realistic model formulations on assimilation results. In this study, 4D-Var-based state estimation is applied to two biogeochemical ocean models: a simple NPZD model with 4 biogeochemical variables (including 1 phytoplankton, 1 zooplankton) and the more complex NEMURO model, containing 11 biogeochemical variables (including 2 phytoplankton, 3 zooplankton). Both models are coupled to a 3-dimensional physical ocean circulation model of the U.S. west coast based on the Regional Ocean Modelling System (ROMS). Chlorophyll satellite observations and physical observations are assimilated into the model, yielding substantial improvements in state estimates for the observed physical and biogeochemical variables in both model formulations. In comparison to the simpler NPZD model, NEMURO shows a better overall fit to the observations. The assimilation also results in small improvements for simulated nitrate concentrations in both models and no apparent degradation of the output for other unobserved variables. The forecasting skill of the biogeochemical models is strongly linked to model performance without data assimilation: for both models, the improved fit obtained through assimilation degrades at similar relative rates, but drops to different absolute levels. Despite the better performance of NEMURO in our experiments, the choice of model and desired level of complexity should depend on the model application and the data available for assimilation.

  4. New model systems for experimental evolution.

    Science.gov (United States)

    Collins, Sinéad

    2013-07-01

    Microbial experimental evolution uses a few well-characterized model systems to answer fundamental questions about how evolution works. This special section highlights novel model systems for experimental evolution, with a focus on marine model systems that can be used to understand evolutionary responses to global change in the oceans.

  5. Performance modeling of automated manufacturing systems

    Science.gov (United States)

    Viswanadham, N.; Narahari, Y.

    A unified and systematic treatment is presented of modeling methodologies and analysis techniques for performance evaluation of automated manufacturing systems. The book is the first treatment of the mathematical modeling of manufacturing systems. Automated manufacturing systems are surveyed and three principal analytical modeling paradigms are discussed: Markov chains, queues and queueing networks, and Petri nets.

  6. Modeling human operator involvement in robotic systems

    NARCIS (Netherlands)

    Wewerinke, P.H.

    1991-01-01

    A modeling approach is presented to describe complex manned robotic systems. The robotic system is modeled as a (highly) nonlinear, possibly time-varying dynamic system including any time delays in terms of optimal estimation, control and decision theory. The role of the human operator(s) is modeled

  7. Visual computing model for immune system and medical system.

    Science.gov (United States)

    Gong, Tao; Cao, Xinxue; Xiong, Qin

    2015-01-01

    Natural immune system is an intelligent self-organizing and adaptive system, which has a variety of immune cells with different types of immune mechanisms. The mutual cooperation between the immune cells shows the intelligence of this immune system, and modeling this immune system has an important significance in medical science and engineering. In order to build a comprehensible model of this immune system for better understanding with the visualization method than the traditional mathematic model, a visual computing model of this immune system was proposed and also used to design a medical system with the immune system, in this paper. Some visual simulations of the immune system were made to test the visual effect. The experimental results of the simulations show that the visual modeling approach can provide a more effective way for analyzing this immune system than only the traditional mathematic equations.

  8. Externalizing Behaviour for Analysing System Models

    NARCIS (Netherlands)

    Ivanova, Marieta Georgieva; Probst, Christian W.; Hansen, René Rydhof; Kammüller, Florian

    Systems models have recently been introduced to model organisationsandevaluate their vulnerability to threats and especially insiderthreats. Especially for the latter these models are very suitable, since insiders can be assumed to have more knowledge about the attacked organisation than outside

  9. Nanomechanical recognition of prognostic biomarker suPAR with DVD-ROM optical technology

    Science.gov (United States)

    Bache, Michael; Bosco, Filippo G.; Brøgger, Anna L.; Frøhling, Kasper B.; Sonne Alstrøm, Tommy; Hwu, En-Te; Chen, Ching-Hsiu; Eugen-Olsen, Jesper; Hwang, Ing-Shouh; Boisen, Anja

    2013-11-01

    In this work the use of a high-throughput nanomechanical detection system based on a DVD-ROM optical drive and cantilever sensors is presented for the detection of urokinase plasminogen activator receptor inflammatory biomarker (uPAR). Several large scale studies have linked elevated levels of soluble uPAR (suPAR) to infectious diseases, such as HIV, and certain types of cancer. Using hundreds of cantilevers and a DVD-based platform, cantilever deflection response from antibody-antigen recognition is investigated as a function of suPAR concentration. The goal is to provide a cheap and portable detection platform which can carry valuable prognostic information. In order to optimize the cantilever response the antibody immobilization and unspecific binding are initially characterized using quartz crystal microbalance technology. Also, the choice of antibody is explored in order to generate the largest surface stress on the cantilevers, thus increasing the signal. Using optimized experimental conditions the lowest detectable suPAR concentration is currently around 5 nM. The results reveal promising research strategies for the implementation of specific biochemical assays in a portable and high-throughput microsensor-based detection platform.

  10. CONTROL SYSTEM IDENTIFICATION THROUGH MODEL MODULATION METHODS

    Science.gov (United States)

    identification has been achieved by using model modulation techniques to drive dynamic models into correspondence with operating control systems. The system ... identification then proceeded from examination of the model and the adaptive loop. The model modulation techniques applied to adaptive control

  11. Advanced Supermarket Refrigeration / Heat Recovery Systems. Annex 26

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    This CD-ROM contains the proceedings (16 papers) of a workshop (held in Stockholm, Sweden, 2-3 October 2000) on Advanced Supermarket Refrigeration/ Heat Recovery Systems. Sessions at the workshop discussed: The supermarket as a system, Analysis and modelling, Field experiences and Energy-efficient equipment. The 16 papers presented at the workshop provide a useful information source for all involved in supermarket refrigeration.

  12. Two sustainable energy system analysis models

    DEFF Research Database (Denmark)

    Lund, Henrik; Goran Krajacic, Neven Duic; da Graca Carvalho, Maria

    2005-01-01

    This paper presents a comparative study of two energy system analysis models both designed with the purpose of analysing electricity systems with a substantial share of fluctuating renewable energy.......This paper presents a comparative study of two energy system analysis models both designed with the purpose of analysing electricity systems with a substantial share of fluctuating renewable energy....

  13. A novel model reduction method based on balanced truncation

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The main goal of this paper is to construct an efficient reduced-order model (ROM) for unsteady aerodynamic force modeling. Balanced truncation (BT) is presented to address the problem. For conventional BT method, it is necessary to compute exact controllability and observability grammians. Although it is relatively straightforward to compute these matrices in a control setting where the system order is moderate, the technique does not extend easily to high order systems. In response to the challenge, snapshots-BT (S-BT) method is introduced for high order system ROM construction. The outline idea of the S-BT method is that snapshots of primary and dual system approximate the controllability and observability matrices in the frequency domain. The method has been demonstrated for 3 high order systems: (1) unsteady motion of a two-dimensional airfoil in response to gust, (2) AGARD 445.6 wing aeroelastic system, and (3) BACT (benchmark active control technology) standard aeroservoelastic system. All the results indicate that S-BT based ROM is efficient and accurate enough to provide a powerful tool for unsteady aerodynamic force modeling.

  14. Graphical Model Debugger Framework for Embedded Systems

    DEFF Research Database (Denmark)

    Zeng, Kebin; Guo, Yu; Angelov, Christo K.

    2010-01-01

    Model Driven Software Development has offered a faster way to design and implement embedded real-time software by moving the design to a model level, and by transforming models to code. However, the testing of embedded systems has remained at the code level. This paper presents a Graphical Model...... Debugger Framework, providing an auxiliary avenue of analysis of system models at runtime by executing generated code and updating models synchronously, which allows embedded developers to focus on the model level. With the model debugger, embedded developers can graphically test their design model...

  15. Particle Tracking Model (PTM) with Coastal Modeling System (CMS)

    Science.gov (United States)

    2014-10-31

    System ( CMS ) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER...www.erdc.usace.army.mil/Missions/WaterResources/CIRP.aspx Coastal Inlets Research Program Particle Tracking Model (PTM) with Coastal Modeling System ( CMS ) The...System ( CMS ), which provides coupled wave and current forcing for PTM simulations. CMS -PTM is implemented in the Surface-water Modeling System, a

  16. Analysis hierarchical model for discrete event systems

    Science.gov (United States)

    Ciortea, E. M.

    2015-11-01

    The This paper presents the hierarchical model based on discrete event network for robotic systems. Based on the hierarchical approach, Petri network is analysed as a network of the highest conceptual level and the lowest level of local control. For modelling and control of complex robotic systems using extended Petri nets. Such a system is structured, controlled and analysed in this paper by using Visual Object Net ++ package that is relatively simple and easy to use, and the results are shown as representations easy to interpret. The hierarchical structure of the robotic system is implemented on computers analysed using specialized programs. Implementation of hierarchical model discrete event systems, as a real-time operating system on a computer network connected via a serial bus is possible, where each computer is dedicated to local and Petri model of a subsystem global robotic system. Since Petri models are simplified to apply general computers, analysis, modelling, complex manufacturing systems control can be achieved using Petri nets. Discrete event systems is a pragmatic tool for modelling industrial systems. For system modelling using Petri nets because we have our system where discrete event. To highlight the auxiliary time Petri model using transport stream divided into hierarchical levels and sections are analysed successively. Proposed robotic system simulation using timed Petri, offers the opportunity to view the robotic time. Application of goods or robotic and transmission times obtained by measuring spot is obtained graphics showing the average time for transport activity, using the parameters sets of finished products. individually.

  17. Aeroservoelastic modeling with proper orthogonal decomposition

    Science.gov (United States)

    Carlson, Henry A.; Verberg, Rolf; Harris, Charles A.

    2017-02-01

    A physics-based, reduced-order, aeroservoelastic model of an F-18 aircraft has been developed using the method of proper orthogonal decomposition (POD), introduced to the field of fluid mechanics by Lumley. The model is constructed with data from high-dimensional, high-fidelity aeroservoelastic computational fluid dynamics (CFD-ASE) simulations that couple equations of motion of the flow to a modal model of the aircraft structure. Through POD modes, the reduced-order model (ROM) predicts both the structural dynamics and the coupled flow dynamics, offering much more information than typically employed, low-dimensional models based on system identification are capable of providing. ROM accuracy is evaluated through direct comparisons between predictions of the flow and structural dynamics with predictions from the parent, the CFD-ASE model. The computational overhead of the ROM is six orders of magnitude lower than that of the CFD-ASE model—accurately predicting the coupled dynamics from simulations of an F-18 fighter aircraft undergoing flutter testing over a wide range of transonic and supersonic flight speeds on a single processor in 1.073 s.

  18. Dual-layered Blu-ray disc ROM fabricated by all-spin method

    Science.gov (United States)

    Hisada, Kazuya; Hayashi, Kazuhiro; Nishikiori, Keiji; Ohno, Eiji

    2004-09-01

    We developed fabrication process using "all spin method" for dual layered Blu-ray Disc ROM. All of the light transmitting layer consisting of a space layer, a cover layer and a hard coat are formed by spin-coating method. Regarding the cover layer, the cycle time is less than 15 seconds and the efficiency of usage of the UV curable resin is 59%. The fabricated disc has sufficient property of thickness variation of the light transmitting layer for all disc area. The disc also has good performances of tilt characteristics including tilt transition caused by environmental sudden change due to the moisture control layer although the substrate material is conventional poly-carbonate. We confirmed the feasibility of the dual layered BD-ROM by "all spin method" and it shows the possibility of low cost BD-ROM disc.

  19. Modelling an alkenone-like proxy record in the NW African upwelling

    OpenAIRE

    2006-01-01

    A regional biogeochemical model is applied to the NW African coastal upwelling between 19° N and 27° N to investigate how a water temperature proxy is produced at the sea surface and recorded in the slope sediments. The biological model has two phytoplankton groups, to distinguish an alkenone producer group (considered as coccolithophores) from other phytoplankton. The Regional Ocean Modelling System (ROMS) is used to simulate the ocean circulation, and takes advantage of the ...

  20. Extensions in model-based system analysis

    OpenAIRE

    Graham, Matthew R.

    2007-01-01

    Model-based system analysis techniques provide a means for determining desired system performance prior to actual implementation. In addition to specifying desired performance, model-based analysis techniques require mathematical descriptions that characterize relevant behavior of the system. The developments of this dissertation give ex. tended formulations for control- relevant model estimation as well as model-based analysis conditions for performance requirements specified as frequency do...

  1. Inductive modelling of an entrepreneurial system

    OpenAIRE

    Yearworth, M

    2010-01-01

    We describe the development of a novel approach to generating theory about the behaviour of an entrepreneurial or start-up system. The new technology business creation system in and around the cities of Bath and Bristol in the UK was analysed using an inductive modelling approach that hybridises grounded theory with system dynamics, a technique we have called grounded systems modelling. Three models that represent the stages of development of an idea through to successful exploitation have be...

  2. Control model for reconfigurable assembly systems

    Institute of Scientific and Technical Information of China (English)

    Yu Jianfeng; Yin Yuehong; Chen Zhaoneng

    2005-01-01

    This paper proposes knowledge based object-oriented timed colored Petri net, a modeling method for reconfigurable assembly systems. Combining knowledge and object-oriented method into timed colored Petri net, a comprehensive and powerful representation model for control of RAS is obtained. With object-oriented method the whole system can be decomposed into concrete objects explicitly, and their relationships are constructed according to the system assembly requirements. Finally, a simple assembly system modeled by the KTCOPN is presented.

  3. Modelling Immune System: Principles, Models,Analysis and Perspectives

    Institute of Scientific and Technical Information of China (English)

    Xiang-hua Li; Zheng-xuan Wang; Tian-yang Lu; Xiang-jiu Che

    2009-01-01

    The biological immune system is a complex adaptive system. There are lots of benefits for building the model of the immune system. For biological researchers, they can test some hypotheses about the infection process or simulate the responses of some drugs. For computer researchers, they can build distributed, robust and fault tolerant networks inspired by the functions of the immune system. This paper provides a comprehensive survey of the literatures on modelling the immune system. From the methodology perspective, the paper compares and analyzes the existing approaches and models, and also demonstrates the focusing research effort on the future immune models in the next few years.

  4. Efficient computation of bifurcation diagrams via adaptive ROMs

    Energy Technology Data Exchange (ETDEWEB)

    Terragni, F [Gregorio Millán Institute for Fluid Dynamics, Nanoscience and Industrial Mathematics, Universidad Carlos III de Madrid, E-28911 Leganés (Spain); Vega, J M, E-mail: fterragn@ing.uc3m.es [E.T.S.I. Aeronáuticos, Universidad Politécnica de Madrid, E-28040 Madrid (Spain)

    2014-08-01

    Various ideas concerning model reduction based on proper orthogonal decomposition are discussed, exploited, and suited to the approximation of complex bifurcations in some dissipative systems. The observation that the most energetic modes involved in these low dimensional descriptions depend only weakly on the actual values of the problem parameters is firstly highlighted and used to develop a simple strategy to capture the transitions occurring over a given bifurcation parameter span. Flexibility of the approach is stressed by means of some numerical experiments. A significant improvement is obtained by introducing a truncation error estimate to detect when the approximation fails. Thus, the considered modes are suitably updated on demand, as the bifurcation parameter is varied, in order to account for possible changes in the phase space of the system that might be missed. A further extension of the method to more complex (quasi-periodic and chaotic) attractors is finally outlined by implementing a control of truncation instabilities, which leads to a general, adaptive reduced order model for the construction of bifurcation diagrams. Illustration of the ideas and methods in the complex Ginzburg–Landau equation (a paradigm of laminar flows on a bounded domain) evidences a fairly good computational efficiency. (paper)

  5. Efficient computation of bifurcation diagrams via adaptive ROMs

    Science.gov (United States)

    Terragni, F.; Vega, J. M.

    2014-08-01

    Various ideas concerning model reduction based on proper orthogonal decomposition are discussed, exploited, and suited to the approximation of complex bifurcations in some dissipative systems. The observation that the most energetic modes involved in these low dimensional descriptions depend only weakly on the actual values of the problem parameters is firstly highlighted and used to develop a simple strategy to capture the transitions occurring over a given bifurcation parameter span. Flexibility of the approach is stressed by means of some numerical experiments. A significant improvement is obtained by introducing a truncation error estimate to detect when the approximation fails. Thus, the considered modes are suitably updated on demand, as the bifurcation parameter is varied, in order to account for possible changes in the phase space of the system that might be missed. A further extension of the method to more complex (quasi-periodic and chaotic) attractors is finally outlined by implementing a control of truncation instabilities, which leads to a general, adaptive reduced order model for the construction of bifurcation diagrams. Illustration of the ideas and methods in the complex Ginzburg-Landau equation (a paradigm of laminar flows on a bounded domain) evidences a fairly good computational efficiency.

  6. Comparison of Photovoltaic Models in the System Advisor Model: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Blair, N. J.; Dobos, A. P.; Gilman, P.

    2013-08-01

    The System Advisor Model (SAM) is free software developed by the National Renewable Energy Laboratory (NREL) for predicting the performance of renewable energy systems and analyzing the financial feasibility of residential, commercial, and utility-scale grid-connected projects. SAM offers several options for predicting the performance of photovoltaic (PV) systems. The model requires that the analyst choose from three PV system models, and depending on that choice, possibly choose from three module and two inverter component models. To obtain meaningful results from SAM, the analyst must be aware of the differences between the model options and their applicability to different modeling scenarios. This paper presents an overview the different PV model options and presents a comparison of results for a 200-kW system using different model options.

  7. Graphical Model Debugger Framework for Embedded Systems

    DEFF Research Database (Denmark)

    Zeng, Kebin

    2010-01-01

    Debugger Framework, providing an auxiliary avenue of analysis of system models at runtime by executing generated code and updating models synchronously, which allows embedded developers to focus on the model level. With the model debugger, embedded developers can graphically test their design model......Model Driven Software Development has offered a faster way to design and implement embedded real-time software by moving the design to a model level, and by transforming models to code. However, the testing of embedded systems has remained at the code level. This paper presents a Graphical Model...... and check the running status of the system, which offers a debugging capability on a higher level of abstraction. The framework intends to contribute a tool to the Eclipse society, especially suitable for model-driven development of embedded systems....

  8. Modeling and Identification of Multirate Systems

    Institute of Scientific and Technical Information of China (English)

    Feng DING; Tongwen CHEN

    2005-01-01

    Multirate systems are abundant in industry; for example, many soft-sensor design problems are related to modeling, parameter identification, or state estimation involving multirate systems. The study of multirate systems goes back to the early 1950's, and has become an active research area in systems and control. This paper briefly surveys the history of development in the area of multirate systems, and introduces some basic concepts and latest results on multirate systems, including a polynomial transformation technique and the lifting technique as tools for handling multirate systems, lifted state space models, parameter identification of dual-rate systems, how to determine fast single-rate models from dual-rate models and directly from dual-rate data, and a hierarchical identification method for general multirate systems. Finally, some further research topics for multirate systems are given.

  9. On Problems of Multicomponent System Maintenance Modelling

    Institute of Scientific and Technical Information of China (English)

    Tomasz Nowakowski; Sylwia Werbinka

    2009-01-01

    We present an overview of some recent developments in the area of mathematical modeling of maintenance decisions for multi-unit systems. The emphasis is on three main groups of multicomponent maintenance optimization models: the block replacement models, group maintenance models, and opportunistic maintenance models. Moreover, an example of a two-unit system maintenance process is provided in order to compare various maintenance policies.

  10. Traffic Modeling in WCDMA System Level Simulations

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Traffic modeling is a crucial element in WCDMA system level simulations. A clear understanding of the nature of traffic in the WCDMA system and subsequent selection of an appropriate random traffic model are critical to the success of the modeling enterprise. The resultant performances will evidently be of a function that our design has been well adapted to the traffic, channel and user mobility models, and these models are also accurate. In this article, our attention will be focused on modeling voice and WWW data traffic with the SBBP model and Victor model respectively.

  11. Causas y caracterización de las etapas del duelo romántico

    OpenAIRE

    Sánchez Aragón, Rozzana; Martínez Cruz,Rebeca

    2014-01-01

    Aun cuando la experiencia romántica trae al individuo sensaciones agradables, perder al ser amado acarrea sentimientos de dolor, desesperación y enojo ante la decepción de afrontar una realidad en la cual las expectativas que habían sido colocadas en la ex pareja no resultaron posibles (Argyle & Furnham, 1983). Durante el duelo romántico, el individuo puede vivir bajo el tormento de la esperanza del retorno y por ende, la constante reactivación de emociones dolorosas (Zaragoza-Toscano, 20...

  12. Experimental study on x-rays dose enhancement effects for floating gate ROMs

    CERN Document Server

    Guo Hong Xia; Chen Yu Sheng; Han Fu Bin; He Chao Hui; Zhao Hui

    2002-01-01

    Experimental results of x-ray dose enhancement effects are given for floating gate read-only memory (ROMs) irradiated in the Beijing Synchrotron Radiation Facility. The wrong byte numbers vs. total irradiation dose have been tested and the equivalent relation of total dose damage is provided compared the response of devices irradiated with sup 6 sup 0 Co gamma-ray source. The x-ray dose enhancement factors for floating gate ROMs are obtained firstly in China. These results can be an effective evaluation data for x-rays radiation hardening technology

  13. Public census data on CD-ROM at Lawrence Berkeley Laboratory. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, D.W.

    1992-07-02

    In connection with the Comprehensive Epidemiologic Data Resource (CEDR) and Populations at Risk to Environmental Pollution (PAREP) projects, of the Information and Computing Sciences Division (ICSD) at Lawrence Berkeley Laboratory (LBL), are using public socioeconomic and geographic data files which are available to CEDR and PAREP collaborators via LBL`s computing network. At this time 67 CD-ROM diskettes (approximately 35 gigabytes) are on line via the Unix file server cedrcd.lbl.gov. Most of the files are from the US Bureau of the Census, and most pertain to the 1990 Census of Population and Housing. This paper contains a list of the CD-ROMs available.

  14. Public census data on CD-ROM at Lawrence Berkeley Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, D.W.

    1992-07-02

    In connection with the Comprehensive Epidemiologic Data Resource (CEDR) and Populations at Risk to Environmental Pollution (PAREP) projects, of the Information and Computing Sciences Division (ICSD) at Lawrence Berkeley Laboratory (LBL), are using public socioeconomic and geographic data files which are available to CEDR and PAREP collaborators via LBL's computing network. At this time 67 CD-ROM diskettes (approximately 35 gigabytes) are on line via the Unix file server cedrcd.lbl.gov. Most of the files are from the US Bureau of the Census, and most pertain to the 1990 Census of Population and Housing. This paper contains a list of the CD-ROMs available.

  15. Towards Modelling of Hybrid Systems

    DEFF Research Database (Denmark)

    Wisniewski, Rafal

    2006-01-01

    The article is an attempt to use methods of category theory and topology for analysis of hybrid systems. We use the notion of a directed topological space; it is a topological space together with a set of privileged paths. Dynamical systems are examples of directed topological spaces. A hybrid...... system consists of a number of dynamical systems that are glued together according to information encoded in the discrete part of the system. We develop a definition of a hybrid system as a functor from the category generated by a transition system to the category of directed topological spaces. Its...... directed homotopy colimit (geometric realization) is a single directed topological space. The behavior of hybrid systems can be then understood in terms of the behavior of dynamical systems through the directed homotopy colimit....

  16. Service systems concepts, modeling, and programming

    CERN Document Server

    Cardoso, Jorge; Poels, Geert

    2014-01-01

    This SpringerBrief explores the internal workings of service systems. The authors propose a lightweight semantic model for an effective representation to capture the essence of service systems. Key topics include modeling frameworks, service descriptions and linked data, creating service instances, tool support, and applications in enterprises.Previous books on service system modeling and various streams of scientific developments used an external perspective to describe how systems can be integrated. This brief introduces the concept of white-box service system modeling as an approach to mo

  17. Hydrological modelling in forested systems

    Science.gov (United States)

    This chapter provides a brief overview of forest hydrology modelling approaches for answering important global research and management questions. Many hundreds of hydrological models have been applied globally across multiple decades to represent and predict forest hydrological p...

  18. Modeling, Control and Coordination of Helicopter Systems

    CERN Document Server

    Ren, Beibei; Chen, Chang; Fua, Cheng-Heng; Lee, Tong Heng

    2012-01-01

    Modeling, Control and Coordination of Helicopter Systems provides a comprehensive treatment of helicopter systems, ranging from related nonlinear flight dynamic modeling and stability analysis to advanced control design for single helicopter systems, and also covers issues related to the coordination and formation control of multiple helicopter systems to achieve high performance tasks. Ensuring stability in helicopter flight is a challenging problem for nonlinear control design and development. This book is a valuable reference on modeling, control and coordination of helicopter systems,providing readers with practical solutions for the problems that still plague helicopter system design and implementation. Readers will gain a complete picture of helicopters at the systems level, as well as a better understanding of the technical intricacies involved. This book also: Presents a complete picture of modeling, control and coordination for helicopter systems Provides a modeling platform for a general class of ro...

  19. Electronic Education System Model-2

    Science.gov (United States)

    Güllü, Fatih; Kuusik, Rein; Laanpere, Mart

    2015-01-01

    In this study we presented new EES Model-2 extended from EES model for more productive implementation in e-learning process design and modelling in higher education. The most updates were related to uppermost instructional layer. We updated learning processes object of the layer for adaptation of educational process for young and old people,…

  20. Network and adaptive system of systems modeling and analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Craig R.; Campbell, James E. Dr. (.; .); Anderson, Dennis James; Eddy, John P.

    2007-05-01

    This report documents the results of an LDRD program entitled ''Network and Adaptive System of Systems Modeling and Analysis'' that was conducted during FY 2005 and FY 2006. The purpose of this study was to determine and implement ways to incorporate network communications modeling into existing System of Systems (SoS) modeling capabilities. Current SoS modeling, particularly for the Future Combat Systems (FCS) program, is conducted under the assumption that communication between the various systems is always possible and occurs instantaneously. A more realistic representation of these communications allows for better, more accurate simulation results. The current approach to meeting this objective has been to use existing capabilities to model network hardware reliability and adding capabilities to use that information to model the impact on the sustainment supply chain and operational availability.

  1. On Verification Modelling of Embedded Systems

    NARCIS (Netherlands)

    Brinksma, Ed; Mader, Angelika

    2004-01-01

    Computer-aided verification of embedded systems hinges on the availability of good verification models of the systems at hand. Such models must be much simpler than full design models or specifications to be of practical value, because of the unavoidable combinatorial complexities in the verificatio

  2. Applying Modeling Tools to Ground System Procedures

    Science.gov (United States)

    Di Pasquale, Peter

    2012-01-01

    As part of a long-term effort to revitalize the Ground Systems (GS) Engineering Section practices, Systems Modeling Language (SysML) and Business Process Model and Notation (BPMN) have been used to model existing GS products and the procedures GS engineers use to produce them.

  3. System Level Modelling and Performance Estimation of Embedded Systems

    DEFF Research Database (Denmark)

    Tranberg-Hansen, Anders Sejer

    is simulation based and allows performance estimation to be carried out throughout all design phases ranging from early functional to cycle accurate and bit true descriptions of the system, modelling both hardware and software components in a unied way. Design space exploration and performance estimation...... an efficient system level design methodology, a modelling framework for performance estimation and design space exploration at the system level is required. This thesis presents a novel component based modelling framework for system level modelling and performance estimation of embedded systems. The framework...... is performed by having the framework produce detailed quantitative information about the system model under investigation. The project is part of the national Danish research project, Danish Network of Embedded Systems (DaNES), which is funded by the Danish National Advanced Technology Foundation. The project...

  4. Maternal and neonatal evaluation of derivated reactive oxygen metabolites (d-ROMs) and biological antioxidant potential in the horse.

    Science.gov (United States)

    Sgorbini, M; Bonelli, F; Marmorini, P; Biagi, G; Corazza, M; Pasquini, A

    2015-01-01

    The aim of the present work was to evaluate derivated reactive oxygen metabolites (d-ROMs) and biological antioxidant potential (BAP) in mares and foals to study perinatal oxidative status. A total of 60 animals were included in the present study. Maternal and foal venous blood samples were collected immediately after delivery along with a sample drawn from one of the umbilical arteries, and plasma samples were evaluated for lactatemia, d-ROMs, and BAP. The t test for unpaired data was applied between mares versus umbilical artery blood versus foals, both for d-ROMs and BAP. The Pearson test with two-tailed P value and a confidence interval of 95% was performed between d-ROMs and BAP and between d-ROMs and lactatemia, both for mares and foals. Finally, the t test for unpaired data was performed between fillies and colts. The t test showed differences between mares versus their own foals versus umbilical artery blood but not foals versus. umbilical artery blood, both for d-ROMs and BAP. A positive correlation was found both in mares and foals between BAP and d-ROMs and in mares between lactatemia and d-ROM. No differences in gender were found in BAP concentration. Our data are in line to previous studies performed in women and cattle.

  5. MULTIMEDIA COLLECTION TO AN ORGANIZATIONAL GUIDE TO POLLUTION PREVENTION ( DVD-ROM ); WORKSHOP SERIES, MANUAL, SUPPLEMENTAL CD

    Science.gov (United States)

    This Multimedia Collection to An Organizational Guide to Pollution Prevention (DVD-ROM) provides videos and slides of a three-day workshop series conducted in each of the ten US EPA Regions, and is based on the publication An Organizational Guide to Pollution Prevention CD-ROM (E...

  6. Oyster Reef Communities in the Chesapeake Bay. Virginia Institute of Marine Science Educational Series. [CD-ROM].

    Science.gov (United States)

    Harding, Juliana M.; Mann, Roger; Clark, Vicki P.

    This CD-ROM, Oyster Reef Communities in the Chesapeake Bay, describes oyster reefs, reef communities, and their roles in the Chesapeake Bay ecosystem. Detailed descriptions of scientific research methods and techniques used to monitor and describe oyster reef communities as well as applications of the resulting data are provided. The CD-ROM was…

  7. Analysis of the Acceptance Behaviour of Medical Librarians and Their Patrons with Regards to Medline on CD-ROM.

    Science.gov (United States)

    Eger, A. J.

    1988-01-01

    Two questionnaires sent to medical librarians and users of the Core Medline/Ebsco CD-ROM disc in the Netherlands gathered data on librarians' attitudes toward the various forms in which Medline is offered--i.e., printed, online, and CD-ROM. Tables and graphs present data on product attributes, availability, use, relevance, subjects searched,…

  8. EXPOSURE ANALYSIS MODELING SYSTEM (EXAMS): USER MANUAL AND SYSTEM DOCUMENTATION

    Science.gov (United States)

    The Exposure Analysis Modeling System, first published in 1982 (EPA-600/3-82-023), provides interactive computer software for formulating aquatic ecosystem models and rapidly evaluating the fate, transport, and exposure concentrations of synthetic organic chemicals - pesticides, ...

  9. Novas tecnologias no ensino de Paleontologia: Cd-rom sobre os fósseis de Sergipe

    Directory of Open Access Journals (Sweden)

    Mário André Trindade Dantas

    2006-12-01

    Full Text Available The teaching of Natural Sciences in secundary schools in Brazil, still made in a descriptive way with excess of terminologies, contributing to reinforce just encyclopedic and theoric teaching, stimulating the passivity, and presenting as main objective the vestibular exam, that requires irrelevants and fragmentary knowledge. The Nacional Curriculars Parameters to the secundary schools suggests the adoption of methodologies of active and interactive learning that permit the students their emancipation. This way, escaping from the tradicional models of teaching, was created an educational Cd-rom about the Sergipe fossils, this resource has as main objective, transmit to the students of secundary schools the contents about Paleontology and Sergipe fossils in a ludic and interactive way.

  10. Pǎun's systems as models of economic systems

    Institute of Scientific and Technical Information of China (English)

    Waldemar Korczynski

    2007-01-01

    In the paper a concept for modeling the economic systems by the formalism of Pǎun's systems is proposed. The main idea is to represent economic systems as homomorphic images of Petri nets corresponding to the (super) cells of Pǎun's systems.

  11. The Use of LDOCE4 on CD-ROM in EFL Students’Writing:a Case Study

    Institute of Scientific and Technical Information of China (English)

    柳轶群; 赵鹏

    2013-01-01

    This case study examines the use of LDOCE4 on CD-ROM in EFL students’writing. Four participants at different proficiency levels were invited to write a composition on a given title. They were then asked to revise their compositions twice, first using the paper dictionary, and secondly using the CD-ROM. Based on a comparison of the two versions, the following conclusions were drawn:1 The CD-ROM is generally more beneficial to EFL students’writing than the paper dictionary. 2 Al-though the CD-ROM is helpful, it is not a panacea. 3 The CD-ROM can provide little help to lower intermediate learners.

  12. Modeling Control Situations in Power System Operations

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten; Singh, Sri Niwas

    2010-01-01

    Increased interconnection and loading of the power system along with deregulation has brought new challenges for electric power system operation, control and automation. Traditional power system models used in intelligent operation and control are highly dependent on the task purpose. Thus, a model...... for intelligent operation and control must represent system features, so that information from measurements can be related to possible system states and to control actions. These general modeling requirements are well understood, but it is, in general, difficult to translate them into a model because of the lack...... of explicit principles for model construction. This paper presents a work on using explicit means-ends model based reasoning about complex control situations which results in maintaining consistent perspectives and selecting appropriate control action for goal driven agents. An example of power system...

  13. Modeling Control Situations in Power System Operations

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten; Singh, Sri Niwas

    2010-01-01

    Increased interconnection and loading of the power system along with deregulation has brought new challenges for electric power system operation, control and automation. Traditional power system models used in intelligent operation and control are highly dependent on the task purpose. Thus, a model...... for intelligent operation and control must represent system features, so that information from measurements can be related to possible system states and to control actions. These general modeling requirements are well understood, but it is, in general, difficult to translate them into a model because of the lack...... of explicit principles for model construction. This paper presents a work on using explicit means-ends model based reasoning about complex control situations which results in maintaining consistent perspectives and selecting appropriate control action for goal driven agents. An example of power system...

  14. Modeling noisy resonant system response

    Science.gov (United States)

    Weber, Patrick Thomas; Walrath, David Edwin

    2017-02-01

    In this paper, a theory-based model replicating empirical acoustic resonant signals is presented and studied to understand sources of noise present in acoustic signals. Statistical properties of empirical signals are quantified and a noise amplitude parameter, which models frequency and amplitude-based noise, is created, defined, and presented. This theory-driven model isolates each phenomenon and allows for parameters to be independently studied. Using seven independent degrees of freedom, this model will accurately reproduce qualitative and quantitative properties measured from laboratory data. Results are presented and demonstrate success in replicating qualitative and quantitative properties of experimental data.

  15. Generic Model Host System Design

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Chungming; /SLAC; Wu, Juhao; /SLAC; Qiang, Ji; /LBL, Berkeley; Shen, Guobao; /Brookhaven

    2012-06-22

    There are many simulation codes for accelerator modelling; each one has some strength but not all. A platform which can host multiple modelling tools would be ideal for various purposes. The model platform along with infrastructure support can be used not only for online applications but also for offline purposes. Collaboration is formed for the effort of providing such a platform. In order to achieve such a platform, a set of common physics data structure has to be set. Application Programming Interface (API) for physics applications should also be defined within a model data provider. A preliminary platform design and prototype is discussed.

  16. Four MATLAB-Simulink models ofphotovoltaic system

    Directory of Open Access Journals (Sweden)

    Jawad Radhi Mahmood, Nasir Hussein Selman

    2016-01-01

    Full Text Available This paper presents four different MATLAB models to simulate the output I-V and P-V characteristics of photovoltaic (PV cells or systems. All of the models are implemented with Matlab-Simulink. Detailed modeling procedure for one-diode equivalent circuit model with all equations and numerical values is presented. The parameters required for the modeling have been taken from manufacturer's datasheet for 240W SOLIMPEKS solar panel. I-V and P-V characteristics of a typical 1.92 kW PV system have been simulated using the proposed models. The simulation took into account the sunlight insolation and temperature effect. Results of the models are validated with I-V and P-V curves provided by the manufacturer(s. The proposed models are very useful for those interested in working in the field of solar systems because they emulate and analyze the characteristics of all the solar systems easily.

  17. CTL Model Update for System Modifications

    CERN Document Server

    Ding, Yulin; Zhang, Yan; Zhang, Y; 10.1613/jair.2420

    2011-01-01

    Model checking is a promising technology, which has been applied for verification of many hardware and software systems. In this paper, we introduce the concept of model update towards the development of an automatic system modification tool that extends model checking functions. We define primitive update operations on the models of Computation Tree Logic (CTL) and formalize the principle of minimal change for CTL model update. These primitive update operations, together with the underlying minimal change principle, serve as the foundation for CTL model update. Essential semantic and computational characterizations are provided for our CTL model update approach. We then describe a formal algorithm that implements this approach. We also illustrate two case studies of CTL model updates for the well-known microwave oven example and the Andrew File System 1, from which we further propose a method to optimize the update results in complex system modifications.

  18. Computational Models for Nonlinear Aeroelastic Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Clear Science Corp. and Duke University propose to develop and demonstrate new and efficient computational methods of modeling nonlinear aeroelastic systems. The...

  19. Model Updating Nonlinear System Identification Toolbox Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ZONA Technology (ZONA) proposes to develop an enhanced model updating nonlinear system identification (MUNSID) methodology that utilizes flight data with...

  20. Modeling and analysis of biomass production systems

    Energy Technology Data Exchange (ETDEWEB)

    Mishoe, J.W.; Lorber, M.N.; Peart, R.M.; Fluck, R.C.; Jones, J.W.

    1984-01-01

    BIOMET is an interactive simulation model that is used to analyze specific biomass and methane production systems. The system model is composed of crop growth models, harvesting, transportation, conversion and economic submodels. By use of menus the users can configure the structure and set selected parameters of the system to analyze the effects of variables within the component models. For example, simulations of a water hyacinth system resulted in yields of 63, 48 and 37 mg/ha/year for different harvest schedules. For napier grass, unit methane costs were $3.04, $2.86 and $2.98 for various yields of biomass. 10 references.

  1. Error Propagation in a System Model

    Science.gov (United States)

    Schloegel, Kirk (Inventor); Bhatt, Devesh (Inventor); Oglesby, David V. (Inventor); Madl, Gabor (Inventor)

    2015-01-01

    Embodiments of the present subject matter can enable the analysis of signal value errors for system models. In an example, signal value errors can be propagated through the functional blocks of a system model to analyze possible effects as the signal value errors impact incident functional blocks. This propagation of the errors can be applicable to many models of computation including avionics models, synchronous data flow, and Kahn process networks.

  2. Hydrological modeling in forested systems

    Science.gov (United States)

    H.E. Golden; G.R. Evenson; S. Tian; Devendra Amatya; Ge Sun

    2015-01-01

    Characterizing and quantifying interactions among components of the forest hydrological cycle is complex and usually requires a combination of field monitoring and modelling approaches (Weiler and McDonnell, 2004; National Research Council, 2008). Models are important tools for testing hypotheses, understanding hydrological processes and synthesizing experimental data...

  3. Stochastic Modelling of Energy Systems

    DEFF Research Database (Denmark)

    Andersen, Klaus Kaae

    2001-01-01

    equations are expressed in terms of stochastic differential equations. From a theoretical viewpoint the techniques for experimental design, parameter estimation and model validation are considered. From the practical viewpoint emphasis is put on how this methods can be used to construct models adequate...

  4. Stochastic Modelling of Hydrologic Systems

    DEFF Research Database (Denmark)

    Jonsdottir, Harpa

    2007-01-01

    In this PhD project several stochastic modelling methods are studied and applied on various subjects in hydrology. The research was prepared at Informatics and Mathematical Modelling at the Technical University of Denmark. The thesis is divided into two parts. The first part contains an introduct......In this PhD project several stochastic modelling methods are studied and applied on various subjects in hydrology. The research was prepared at Informatics and Mathematical Modelling at the Technical University of Denmark. The thesis is divided into two parts. The first part contains...... an introduction and an overview of the papers published. Then an introduction to basic concepts in hydrology along with a description of hydrological data is given. Finally an introduction to stochastic modelling is given. The second part contains the research papers. In the research papers the stochastic methods...

  5. Hypervirial Models of Stellar Systems

    CERN Document Server

    Evans, N W

    2005-01-01

    A family of cusped potential-density pairs is introduced for modelling galaxies and dark haloes. The density profile is cusped like 1/r^(2-p) at small radii. The distribution function takes the simple form L^(p-2) E^([3p+1]/2) (where E is the binding energy and L is the angular momentum). The models all possess the remarkable property that the virial theorem holds locally, from which they earn their name as the hypervirial family. Famously, this property was first discovered by Eddington to hold for the Plummer model in 1916. In fact, the seductive properties of the Plummer model extend to the whole hypervirial family, including the members possessing the cosmologically important cusps with density behaving like 1/r or 1/r^1.5 or 1/r^1.33. The intrinsic and projected properties of the family of models are discussed in some detail.

  6. Semantic models for adaptive interactive systems

    CERN Document Server

    Hussein, Tim; Lukosch, Stephan; Ziegler, Jürgen; Calvary, Gaëlle

    2013-01-01

    Providing insights into methodologies for designing adaptive systems based on semantic data, and introducing semantic models that can be used for building interactive systems, this book showcases many of the applications made possible by the use of semantic models.Ontologies may enhance the functional coverage of an interactive system as well as its visualization and interaction capabilities in various ways. Semantic models can also contribute to bridging gaps; for example, between user models, context-aware interfaces, and model-driven UI generation. There is considerable potential for using

  7. Model reduction of linear conservative mechanical systems

    NARCIS (Netherlands)

    Schaft, van der A.J.; Oeloff, J.E.

    1990-01-01

    An approach for model reduction of linear conservative or weakly damped mechanical systems is proposed. It is based on the balancing of an associated gradient system. It uses the joint knowledge of the system matrix and the input and output matrices of the Hamiltonian system. The key idea is to asso

  8. Modeling complex work systems - method meets reality

    OpenAIRE

    Veer, van der, C.G.; Hoeve, Machteld; Lenting, Bert F.

    1996-01-01

    Modeling an existing task situation is often a first phase in the (re)design of information systems. For complex systems design, this model should consider both the people and the organization involved, the work, and situational aspects. Groupware Task Analysis (GTA) as part of a method for the design of complex systems, has been applied in a situation of redesign of a Dutch public administration system. The most feasible method to collect information in this case was ethnography, the resulti...

  9. Modeling of power electronic systems with EMTP

    Science.gov (United States)

    Tam, Kwa-Sur; Dravid, Narayan V.

    1989-01-01

    In view of the potential impact of power electronics on power systems, there is need for a computer modeling/analysis tool to perform simulation studies on power systems with power electronic components as well as to educate engineering students about such systems. The modeling of the major power electronic components of the NASA Space Station Freedom Electric Power System is described along with ElectroMagnetic Transients Program (EMTP) and it is demonstrated that EMTP can serve as a very useful tool for teaching, design, analysis, and research in the area of power systems with power electronic components. EMTP modeling of power electronic circuits is described and simulation results are presented.

  10. Models of the venous system

    DEFF Research Database (Denmark)

    Mehlsen, J

    2000-01-01

    of the venous system require at least three elements: a resistor, a capacitor and an inductor, with the latter being of more importance in the venous than in the arterial system. Non-linearities must be considered in pressure/flow relations in the small venules, during venous collapse, or low flow conditions...

  11. Serum concentrations of the derivatives of reactive oxygen metabolites (d-ROMs) in dogs with leishmaniosis.

    Science.gov (United States)

    Paltrinieri, Saverio; Ravicini, Sara; Rossi, Gabriele; Roura, Xavier

    2010-12-01

    Leishmania infantum interferes with the oxidative metabolism of phagocytes. In order to assess whether derivatives of reactive oxygen metabolites (d-ROMs) decrease due to infection or increase due to inflammation, d-ROMs were measured in serum collected from control dogs (Group 1; n = 12), from dogs seropositive for Leishmania either symptomatic (Group 2; n = 27) or not (Group 3; n = 14), and from dogs with other diseases (Group 4; n = 16). The concentrations of d-ROMs in the four groups, expressed in Carratelli Units (U CARR) were, respectively, 75.4 ± 39.5 (median, 81.6), 108.2 ± 96.3 (73.4), 73.5 ± 62.2 (62.0), 127.7 ± 97.3 (94.3). There were no significant differences between groups, but dogs with values higher than the reference interval were found, mostly in Groups 2 and 4 (which had serum C-reactive protein levels consistent with inflammation), whilst low values were occasionally found in Groups 2 and 3. Inflammation may mask decreases in d-ROMs induced by Leishmania infection.

  12. Criteria Affecting Pre-Service TESOLTeachers' Attitudes towards Using CD-ROM Dictionaries

    Science.gov (United States)

    Issa, Jinan Hatem; Jamil, Hazri

    2012-01-01

    Undoubtedly, CD-ROM dictionaries assist in removing the fear of inadequacy in language usage and ameliorating the panic of being-on-the-spot especially with the rapid development of information technology. This research was conducted to find out whether there is a relationship between pre-service TESOL teachers' attitudes towards using CD-ROM…

  13. A Leader's Guide to What Do You Stand for? For Kids CD-ROM

    Science.gov (United States)

    Lewis, Barbara A.

    2010-01-01

    Kids of any age can learn the basics of good character and figure out what they stand for. This leader's guide is a companion to the children's book, "What Do You Stand For? For Kids". The 11 lessons on the CD-ROM provide a complete course for kids on caring, citizenship, cooperation, fairness, forgiveness, honesty, relationships, respect,…

  14. Review of Discovering Craven, Richard Harland Collection and Craven Museum Lithics Collections CD-Roms

    Directory of Open Access Journals (Sweden)

    Gail Falkingham

    2003-07-01

    Full Text Available Discovering Craven is aimed at the general reader, and provides a beautifully illustrated and presented interactive CD-Rom, created with Illuminatus Interactive. Craven is one of the seven districts within the county of North Yorkshire, a large area of which falls within the Yorkshire Dales National Park.

  15. Trainer's Guide to Building Blocks for Teaching Preschoolers with Special Needs [CD-ROM

    Science.gov (United States)

    Joseph, Gail E.; Sandall, Susan R.; Schwartz, Ilene S.

    2010-01-01

    An essential teaching companion for instructors of pre-K educators, this convenient CD-ROM is a vivid blueprint for effective inclusive education using the popular "Building Blocks" approach. Following the structure of the bestselling textbook, this comprehensive guide helps teacher educators provide effective instruction on the three types of…

  16. Students Working with an English Learners' Dictionary on CD-ROM.

    Science.gov (United States)

    Winkler, Birgit

    This paper examines the growing literature on pedagogical lexicography and the growing focus on how well the learner uses the dictionary in second language learning. Dictionaries are becoming more user-friendly. This study used the writing task to reveal new insights into how students use a CD-ROM dictionary. It found a lack of dictionary-using…

  17. Ambient Temperature Based Thermal Aware Energy Efficient ROM Design on FPGA

    DEFF Research Database (Denmark)

    Saini, Rishita; Bansal, Neha; Bansal, Meenakshi

    2015-01-01

    Thermal aware design is currently gaining importance in VLSI research domain. In this work, we are going to design thermal aware energy efficient ROM on Virtex-5 FPGA. Ambient Temperature, airflow, and heat sink profile play a significant role in thermal aware hardware design life cycle. Ambient...

  18. Integreret cd-rom- og Internet-koncept til elektronisk referenceværk

    DEFF Research Database (Denmark)

    Almind, Richard; Bergenholtz, Henning

    1998-01-01

    Der foreslås en teoretisk ramme for en elektronisk ordbog, der integrerer internettets dynamiske formidlingskanaler med en cd-roms statiske lagre af information. Formålet er at formindske søgetiderne, løbende at kunne opdatere den tilgængelige viden og at sikre et acceptabelt brugerniveau. Samtid...

  19. RADIUS: Research Archive on Disability in the United States. [CD-ROMs].

    Science.gov (United States)

    Sociometrics Corp., Los Altos, CA.

    This Research Archive on Disability in the United States (RADIUS), a database on CD-ROM, contains 19 data sets on the prevalence, incidence, correlates, and consequences of disability in the United States. The 19 data sets are: (1) 1991 National Maternal and Infant Health Follow-Up Survey; (2) National Pediatric Trauma Registry, 1988-1994; (3)…

  20. CD-ROMs: Volumes of Books on a Single 4 3/4-Inch Disk.

    Science.gov (United States)

    Angle, Melanie

    1992-01-01

    Summarizes the storage capacity, advantages, disadvantages, hardware configurations, and costs of CD-ROMs. Several available titles are described, including "Books in Print," literature study guides, the works of Shakespeare, a historical almanac of "Time Magazine" articles, a scientific dictionary and encyclopedia, and a…

  1. EP and CD-ROM products - Current trends of production and market development -

    Science.gov (United States)

    Watanabe, Kazuhiko

    The printed books and magazines/journals have been, and still even now are, dominant materials for public reading and reference usage. Microform publications have been also adopted for library collection build-up, but it is still within a very limited scale and coverage. As the first "new media" product, we should approve the fact that "CD-ROM" keeps amazingly large information storage capacity and also quite flexible application utility. So far, among the firstly released CD-ROMS, bibliographic databases, both for Japanese and English publications, look already quite widely purchased and now installed in many workstations of libraries. The users should evaluate its cost-effectiveness not only by its great data storage capacity but also by its frequent usage merit for library work rationalization. Multiple applied usage of CD-ROM will surely serve to such library routine works as searching, cataloguing, reading list preparation, inventory checking and new order placing, etc. 'CD-ROM' is the first EP product for quite wide usage.

  2. Two Months to a CD-ROM: We Did It and So Can You!

    Science.gov (United States)

    Lo, Amanda Siewling; And Others

    1991-01-01

    Outlines the process of a CD-ROM desktop publishing project at Simmons College Graduate School of Library and Information Science. Highlights include the planning process; data generation and database development; data preparation, including data conversion and indexing; full text retrieval; assembly and production; and distribution. (three…

  3. Two CD-ROM Products for Social Studies Classrooms. Instructional Technology.

    Science.gov (United States)

    White, Charles

    1995-01-01

    Provides reviews of two CD-ROM products currently available for social studies education. Describes the content, technical requirements, and instructional strategies of "Who Built America?" and "The Revolutionary War." Also contains a review of a videotape about the internment of Japanese Americans during World War II. (CFR)

  4. The Phenomenal World of Physics. The Science Club. Ages 10-14. [CD-ROM].

    Science.gov (United States)

    1999

    This CD-ROM allows students to learn about physics principles and the scientists who discovered them through genius or luck. The simplicity of these physical laws and how the discovery of these laws has improved the daily lives of humans is discussed. The computer program explores the physics behind the earth's rotation, Archimedes' Principles,…

  5. Our Crowded Shores: Balancing Growth and Resource Protection. [CD-ROM].

    Science.gov (United States)

    National Oceanic and Atmospheric Administration (DOC), Washington, DC. Environmental Data Service.

    This interactive educational CD-ROM is designed for the general public and examines the extent of coastal population growth and development and their impact on coastal resources. High schools will find it a useful complement to environmental sciences curricula while science and visitors centers, museums, and aquariums will discover it to be a…

  6. Mixed Media: A Roundup of CD-ROM and Electronic Products.

    Science.gov (United States)

    Bruno, Frank Alan

    2001-01-01

    Highlights multicultural materials that are useful for teaching students of all ages (elementary through college level). These include such CD-ROM products as "The Ellis Island Experience" and "The Civil Rights Movement in the United States" and such World Wide Web-based products as "Diversify Your World,""American Slavery: A Complete…

  7. The New York Trade Publishers and CD-ROM: Where Are They Heading?

    Science.gov (United States)

    Newmark, Eileen

    1994-01-01

    Discusses the strategies top trade publishers, including Putnam New Media, Paramount Communications, Random House, Penguin USA, and Reader's Digest, are taking toward CD-ROM publishing. Strategies include purchasing electronic media companies; setting up an independent business; and building a new media business by integrating new efforts into the…

  8. Access Education Literature with ERIC on CD-ROM: An Introductory Workshop.

    Science.gov (United States)

    Roberts, Deanna

    This report provides instructional materials for a voluntary introductory workshop in the use of the Educational Resources and Information Clearinghouse (ERIC) database on CD-ROM. The workshop instruction is based on Leslie J. Brigg's Theories of Instructional Design with instructional objectives based on Robert Gagne's Learning Taxonomy. Library…

  9. First Encounters: Native Americans and Europeans in the Mississippi Valley. [CD-ROM].

    Science.gov (United States)

    Sabo, George, III; Restrepo, Luis Fernando; Jones, Linda

    This CD-ROM provides interactive, multimedia software that enables students to investigate many aspects of Native American and European encounters in the Mississippi Valley through study of original historical sources, including texts, maps, artworks, and archaeological finds. The Lower Mississippi Valley was chosen as the study area because of…

  10. Content Evaluation of Textual CD-ROM and Web Databases. Database Searching Series.

    Science.gov (United States)

    Jacso, Peter

    This book provides guidelines for evaluating a variety of database types, including abstracting and indexing, directory, full-text, and page-image databases available in online and/or CD-ROM formats. The book discusses the purpose and techniques of comparing and evaluating the most important characteristics of textual databases, such as their…

  11. S.Meijeres romāna "Krēsla" popularitātes fenomens

    OpenAIRE

    Jurgevica, Ineta

    2010-01-01

    Šī bakalaura darba mērķis is atklāt romāna “Krēsla” popularitātes iemeslus, salīdzināt to ar citiem populāriem un klasiskiem darbiem, kā arī analizēt romānu “Krēsla” no struktūras elementu parauga viedokļa. Pētījuma pamatā izmantoti teorētiskie materiāli par intertekstualitāti un strukturālo analīzi. Bakalaura darbā tika izmantota romānam “Krēsla” veltīto kritikas materiālu analīze, pētīšana un salīdzināšana ar Dž. Ostinas “Lepnums un aiszpriedumi “, E. Brontē “Kalnu aukas”, V. Šekspīra “Rom...

  12. Factors Affecting Pre-Service TESOL Teachers' Attitudes towards Using CD-ROM Dictionary

    Science.gov (United States)

    Issa, Jinan Hatem; Jamil, Hazri

    2011-01-01

    Rapid technological advances in communication technologies and computational power are altering the nature of knowledge, skills, talents and the know-how of individuals. A CD-ROM dictionary is an interesting and effective teaching tool, which captures pre-service teachers' interest and does much more than just translates especially with the…

  13. Kino'jib'alil ri Qati't Qamam--El Pensamiento de Nuestros Abuelos (Our Grandparents' Thinking). [CD-ROM].

    Science.gov (United States)

    Academy for Educational Development, Washington, DC.

    This CD-ROM is part of an interactive and dynamic multimedia package of information and games for learning K'iche' and Ixil. Groups of students from each of the four teacher training schools re-enacted various Mayan traditions and documented them in this multimedia CD-ROM. The following presentations are included on the CD-ROM: Uxe'al nutinamit…

  14. Kino'jib'alil ri Qati't Qamam--El Pensamiento de Nuestros Abuelos (Our Grandparents' Thinking). [CD-ROM].

    Science.gov (United States)

    Academy for Educational Development, Washington, DC.

    This CD-ROM is part of an interactive and dynamic multimedia package of information and games for learning K'iche' and Ixil. Groups of students from each of the four teacher training schools re-enacted various Mayan traditions and documented them in this multimedia CD-ROM. The following presentations are included on the CD-ROM: Uxe'al nutinamit…

  15. Learning Markov models for stationary system behaviors

    DEFF Research Database (Denmark)

    Chen, Yingke; Mao, Hua; Jaeger, Manfred

    2012-01-01

    Establishing an accurate model for formal verification of an existing hardware or software system is often a manual process that is both time consuming and resource demanding. In order to ease the model construction phase, methods have recently been proposed for automatically learning accurate...... system models from data in the form of observations of the target system. Common for these approaches is that they assume the data to consist of multiple independent observation sequences. However, for certain types of systems, in particular many running embedded systems, one would only have access...... the learned model. Experiments demonstrate that system properties (formulated as stationary probabilities of LTL formulas) can be reliably identified using the learned model....

  16. Unsteady aerodynamic modeling based on POD-observer method

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    A new hybrid approach to constructing reduced-order models(ROM)of unsteady aerodynamics applicable to aeroelastic analysis is presented by using proper orthogonal decomposition(POD)in combination with observer techniques.Fluid modes are generated through POD by sampling observations of solutions derived from the full-order model.The response in the POD training is projected onto the fluid modes to determine the time history of the modal amplitudes.The resulting data are used to extract the Markov parameters of the low-dimensional model for modal amplitudes using a related deadbeat observer.The state-space realization is synthesized from the system’s Markov parameters that are processed with the eigensystem realization algorithm.The POD-observer method is applied to a two-dimensional airfoil system in subsonic flow field.The results predicted by the ROM are in general agreement with those from the full-order system.The ROM obtained by the hybrid approach captures the essence of a fluid system and produces vast reduction in both degrees of freedom and computational time relative to the full-order model.

  17. Integrating systems biology models and biomedical ontologies

    Directory of Open Access Journals (Sweden)

    de Bono Bernard

    2011-08-01

    Full Text Available Abstract Background Systems biology is an approach to biology that emphasizes the structure and dynamic behavior of biological systems and the interactions that occur within them. To succeed, systems biology crucially depends on the accessibility and integration of data across domains and levels of granularity. Biomedical ontologies were developed to facilitate such an integration of data and are often used to annotate biosimulation models in systems biology. Results We provide a framework to integrate representations of in silico systems biology with those of in vivo biology as described by biomedical ontologies and demonstrate this framework using the Systems Biology Markup Language. We developed the SBML Harvester software that automatically converts annotated SBML models into OWL and we apply our software to those biosimulation models that are contained in the BioModels Database. We utilize the resulting knowledge base for complex biological queries that can bridge levels of granularity, verify models based on the biological phenomenon they represent and provide a means to establish a basic qualitative layer on which to express the semantics of biosimulation models. Conclusions We establish an information flow between biomedical ontologies and biosimulation models and we demonstrate that the integration of annotated biosimulation models and biomedical ontologies enables the verification of models as well as expressive queries. Establishing a bi-directional information flow between systems biology and biomedical ontologies has the potential to enable large-scale analyses of biological systems that span levels of granularity from molecules to organisms.

  18. Integrating systems biology models and biomedical ontologies

    Science.gov (United States)

    2011-01-01

    Background Systems biology is an approach to biology that emphasizes the structure and dynamic behavior of biological systems and the interactions that occur within them. To succeed, systems biology crucially depends on the accessibility and integration of data across domains and levels of granularity. Biomedical ontologies were developed to facilitate such an integration of data and are often used to annotate biosimulation models in systems biology. Results We provide a framework to integrate representations of in silico systems biology with those of in vivo biology as described by biomedical ontologies and demonstrate this framework using the Systems Biology Markup Language. We developed the SBML Harvester software that automatically converts annotated SBML models into OWL and we apply our software to those biosimulation models that are contained in the BioModels Database. We utilize the resulting knowledge base for complex biological queries that can bridge levels of granularity, verify models based on the biological phenomenon they represent and provide a means to establish a basic qualitative layer on which to express the semantics of biosimulation models. Conclusions We establish an information flow between biomedical ontologies and biosimulation models and we demonstrate that the integration of annotated biosimulation models and biomedical ontologies enables the verification of models as well as expressive queries. Establishing a bi-directional information flow between systems biology and biomedical ontologies has the potential to enable large-scale analyses of biological systems that span levels of granularity from molecules to organisms. PMID:21835028

  19. Very Large System Dynamics Models - Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Jacob J. Jacobson; Leonard Malczynski

    2008-10-01

    This paper provides lessons learned from developing several large system dynamics (SD) models. System dynamics modeling practice emphasize the need to keep models small so that they are manageable and understandable. This practice is generally reasonable and prudent; however, there are times that large SD models are necessary. This paper outlines two large SD projects that were done at two Department of Energy National Laboratories, the Idaho National Laboratory and Sandia National Laboratories. This paper summarizes the models and then discusses some of the valuable lessons learned during these two modeling efforts.

  20. Precipitation-runoff modeling system; user's manual

    Science.gov (United States)

    Leavesley, G.H.; Lichty, R.W.; Troutman, B.M.; Saindon, L.G.

    1983-01-01

    The concepts, structure, theoretical development, and data requirements of the precipitation-runoff modeling system (PRMS) are described. The precipitation-runoff modeling system is a modular-design, deterministic, distributed-parameter modeling system developed to evaluate the impacts of various combinations of precipitation, climate, and land use on streamflow, sediment yields, and general basin hydrology. Basin response to normal and extreme rainfall and snowmelt can be simulated to evaluate changes in water balance relationships, flow regimes, flood peaks and volumes, soil-water relationships, sediment yields, and groundwater recharge. Parameter-optimization and sensitivity analysis capabilites are provided to fit selected model parameters and evaluate their individual and joint effects on model output. The modular design provides a flexible framework for continued model system enhancement and hydrologic modeling research and development. (Author 's abstract)

  1. Network model of security system

    Directory of Open Access Journals (Sweden)

    Adamczyk Piotr

    2016-01-01

    Full Text Available The article presents the concept of building a network security model and its application in the process of risk analysis. It indicates the possibility of a new definition of the role of the network models in the safety analysis. Special attention was paid to the development of the use of an algorithm describing the process of identifying the assets, vulnerability and threats in a given context. The aim of the article is to present how this algorithm reduced the complexity of the problem by eliminating from the base model these components that have no links with others component and as a result and it was possible to build a real network model corresponding to reality.

  2. Evaluation Model of System Survivability

    Institute of Scientific and Technical Information of China (English)

    LIU Yuling; PAN Shiying; TIAN Junfeng

    2006-01-01

    This paper puts forward a survivability evaluation model, SQEM(Survivability Quantitative Evaluation Model), based on lucubrating the main method existed. Then it defines the measurement factors and parses the survivability mathematically, introduces state change probability and the idea of setting the weights of survivability factors dynamically into the evaluating process of SQEM, which improved the accuracy of evaluation. An example is presented to illustrate the way SQEM works, which demonstrated the validity and feasibility of the method.

  3. Brief history of agricultural systems modeling.

    Science.gov (United States)

    Jones, James W; Antle, John M; Basso, Bruno; Boote, Kenneth J; Conant, Richard T; Foster, Ian; Godfray, H Charles J; Herrero, Mario; Howitt, Richard E; Janssen, Sander; Keating, Brian A; Munoz-Carpena, Rafael; Porter, Cheryl H; Rosenzweig, Cynthia; Wheeler, Tim R

    2017-07-01

    Agricultural systems science generates knowledge that allows researchers to consider complex problems or take informed agricultural decisions. The rich history of this science exemplifies the diversity of systems and scales over which they operate and have been studied. Modeling, an essential tool in agricultural systems science, has been accomplished by scientists from a wide range of disciplines, who have contributed concepts and tools over more than six decades. As agricultural scientists now consider the "next generation" models, data, and knowledge products needed to meet the increasingly complex systems problems faced by society, it is important to take stock of this history and its lessons to ensure that we avoid re-invention and strive to consider all dimensions of associated challenges. To this end, we summarize here the history of agricultural systems modeling and identify lessons learned that can help guide the design and development of next generation of agricultural system tools and methods. A number of past events combined with overall technological progress in other fields have strongly contributed to the evolution of agricultural system modeling, including development of process-based bio-physical models of crops and livestock, statistical models based on historical observations, and economic optimization and simulation models at household and regional to global scales. Characteristics of agricultural systems models have varied widely depending on the systems involved, their scales, and the wide range of purposes that motivated their development and use by researchers in different disciplines. Recent trends in broader collaboration across institutions, across disciplines, and between the public and private sectors suggest that the stage is set for the major advances in agricultural systems science that are needed for the next generation of models, databases, knowledge products and decision support systems. The lessons from history should be

  4. Information modeling system for blast furnace control

    Science.gov (United States)

    Spirin, N. A.; Gileva, L. Y.; Lavrov, V. V.

    2016-09-01

    Modern Iron & Steel Works as a rule are equipped with powerful distributed control systems (DCS) and databases. Implementation of DSC system solves the problem of storage, control, protection, entry, editing and retrieving of information as well as generation of required reporting data. The most advanced and promising approach is to use decision support information technologies based on a complex of mathematical models. The model decision support system for control of blast furnace smelting is designed and operated. The basis of the model system is a complex of mathematical models created using the principle of natural mathematical modeling. This principle provides for construction of mathematical models of two levels. The first level model is a basic state model which makes it possible to assess the vector of system parameters using field data and blast furnace operation results. It is also used to calculate the adjustment (adaptation) coefficients of the predictive block of the system. The second-level model is a predictive model designed to assess the design parameters of the blast furnace process when there are changes in melting conditions relative to its current state. Tasks for which software is developed are described. Characteristics of the main subsystems of the blast furnace process as an object of modeling and control - thermal state of the furnace, blast, gas dynamic and slag conditions of blast furnace smelting - are presented.

  5. MODELING AND ANALYSIS OF REGIONAL BOUNDARY SYSTEM

    Institute of Scientific and Technical Information of China (English)

    YAN Guangle; WANG Huanchen

    2001-01-01

    In this paper, the problems of modeling and analyzing the system with change able boundary are researched. First, a kind of expanding system is set up, in which the changeable boundary is dealt with as a regional boundary. Then some relative models are developed to describe the regional boundary system. Next, the transition or the driftage of bifurcation points in the system is discussed. A fascinating case is studied in which two or more than two classes of chaotic attractive points coexist together or exist alternatively in the same system. Lastly, an effective new method of chaos avoidance for the system is put forward.

  6. Formal heterogeneous system modeling with SystemC

    DEFF Research Database (Denmark)

    Niaki, Seyed Hosein Attarzadeh; Jakobsen, Mikkel Koefoed; Sulonen, Tero;

    2012-01-01

    Electronic System Level (ESL) design of embedded systems proposes raising the abstraction level of the design entry to cope with the increasing complexity of such systems. To exploit the benefits of ESL, design languages should allow specification of models which are a) heterogeneous, to describe...... different aspects of systems; b) formally defined, for application of analysis and synthesis methods; c) executable, to enable early detection of specification; and d) parallel, to exploit the multi- and many-core platforms for simulation and implementation. We present a modeling library on top of System......C, targeting heterogeneous embedded system design, based on four models of computation. The library has a formal basis where all elements are well defined and lead in construction of analyzable models. The semantics of communication and computation are implemented by the library, which allows the designer...

  7. Grey Box Modelling of Hydrological Systems

    DEFF Research Database (Denmark)

    Thordarson, Fannar Ørn

    The main topic of the thesis is grey box modelling of hydrologic systems, as well as formulation and assessment of their embedded uncertainties. Grey box model is a combination of a white box model, a physically-based model that is traditionally formulated using deterministic ordinary differential...... the lack of fit in state space formulation, and further support decisions for a model expansion. By using stochastic differential equations to formulate the dynamics of the hydrological system, either the complexity of the model can be increased by including the necessary hydrological processes...... in the model, or formulation of process noise can be considered so that it meets the physical limits of the hydrological system and give an adequate description of the embedded uncertainty in model structure. The thesis consists of two parts: a summary report and a part which contains six scientific papers...

  8. An Interactive Multimedia Based Instruction in Experimental Modelling

    DEFF Research Database (Denmark)

    Knudsen, Morten; Nielsen, J.N.; Østergaard, J.

    1997-01-01

    A CD-ROM based interactive multimedia instruction in experimental modelling for Danish Engineering School teachers is described. The content is based on a new sensitivity approach for direct estimation of physical parameters in linear and nonlinear dynamic systems. The presentation is inspired...... of Solomans=s inventory of learning styles. To enhance active learning and motivation by real life problems, the simulation tool Matlab is integrated in the authoring program Medi8or....

  9. A Model-Based Systems Engineering Methodology for Employing Architecture In System Analysis: Developing Simulation Models Using Systems Modeling Language Products to Link Architecture and Analysis

    Science.gov (United States)

    2016-06-01

    ENGINEERING METHODOLOGY FOR EMPLOYING ARCHITECTURE IN SYSTEM ANALYSIS: DEVELOPING SIMULATION MODELS USING SYSTEMS MODELING LANGUAGE PRODUCTS TO LINK... ENGINEERING METHODOLOGY FOR EMPLOYING ARCHITECTURE IN SYSTEM ANALYSIS: DEVELOPING SIMULATION MODELS USING SYSTEMS MODELING LANGUAGE PRODUCTS TO LINK...to model-based systems engineering (MBSE) by formally defining an MBSE methodology for employing architecture in system analysis (MEASA) that presents

  10. En teoretisk utdyping av rom og materialitet som pedagogisk ressurs i barnehagen

    Directory of Open Access Journals (Sweden)

    Solveig Nordtømme

    2015-07-01

    Full Text Available Abstract: This article is a theoretical exploration with the aim of discussing an ontological basis for space and materiality as educational resources in kindergarten. Attention is directed on children’s play experiences interacting with space and materiality, and how children use and create space. The metaphors front stage, space in between, and backstage (inspired from Erving Goffman, 1969, which form the study's main findings, are used as the backdrop for the issue and analyzes. The empirical material used in this exploration has been collected with an ethnographic methodological approach in two kindergartens. Maurice Merleau-Ponty’s (1962 focus on bodily experience and presence in space, along with concepts from Latour’s (2005 actor-network theory, is used to explore the data. The article contributes with theoretical tools for professionals in kindergarten teaching, to shed light on the importance of space, materiality and play in children's everyday life in kindergarten.Sammendrag: Denne artikkelen diskuterer et ontologisk grunnlag og er en teoretisk utforskning av rom og materialitet som en pedagogisk ressurs i barnehagen. Oppmerksomheten er rettet mot barns lekeerfaringer i samspill med rom og materialitet, og hvordan barn bruker og skaper rom. Metaforene hovedrom, mellomrom, og bakrom (inspirert fra Erving Goffman, 1969, som danner studiens hovedfunn, blir brukt som et bakteppe for problemstilling og analyser av det empiriske materialet fra to barnehager. Maurice Merleau-Ponty publikasjoner The Phenomenology of Perception (Merleau-Ponty, 1962 med sitt fokus på kroppslig erfaring i levd rom, blir brukt sammen med begreper fra Latours aktør-nettverksteori (Latour 2005 til å utforske hvordan rom og materialitet kan være pedagogiske ressurser. Artikkelens kunnskapsbidrag er å presentere et teoretisk verktøy for barnehageprofesjonen og kunnskaper om lekens betydning i barns hverdag i barnehagen.

  11. System Advisor Model: Flat Plate Photovoltaic Performance Modeling Validation Report

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, J.; Whitmore, J.; Kaffine, L.; Blair, N.; Dobos, A. P.

    2013-12-01

    The System Advisor Model (SAM) is a free software tool that performs detailed analysis of both system performance and system financing for a variety of renewable energy technologies. This report provides detailed validation of the SAM flat plate photovoltaic performance model by comparing SAM-modeled PV system generation data to actual measured production data for nine PV systems ranging from 75 kW to greater than 25 MW in size. The results show strong agreement between SAM predictions and field data, with annualized prediction error below 3% for all fixed tilt cases and below 8% for all one axis tracked cases. The analysis concludes that snow cover and system outages are the primary sources of disagreement, and other deviations resulting from seasonal biases in the irradiation models and one axis tracking issues are discussed in detail.

  12. Community Sediment Transport Model

    Science.gov (United States)

    2007-01-01

    are used to determine that model results are consistent across compilers, platforms, and computer architectures , and to ensure that changes in code do...Mississippi State University: Bhate During the early months of this project, the focus was on understanding ROMS-CSTM model, architecture , and...Marchesiello, J.C. McWilliams, & K.D. Stolzenbach, 2007: Sediment transport modeling on Southern Californian shelves: A ROMS case study. Continental

  13. Modeling Cytoskeletal Active Matter Systems

    Science.gov (United States)

    Blackwell, Robert

    Active networks of filamentous proteins and crosslinking motor proteins play a critical role in many important cellular processes. One of the most important microtubule-motor protein assemblies is the mitotic spindle, a self-organized active liquid-crystalline structure that forms during cell division and that ultimately separates chromosomes into two daughter cells. Although the spindle has been intensively studied for decades, the physical principles that govern its self-organization and function remain mysterious. To evolve a better understanding of spindle formation, structure, and dynamics, I investigate course-grained models of active liquid-crystalline networks composed of microtubules, modeled as hard spherocylinders, in diffusive equilibrium with a reservoir of active crosslinks, modeled as hookean springs that can adsorb to microtubules and and translocate at finite velocity along the microtubule axis. This model is investigated using a combination of brownian dynamics and kinetic monte carlo simulation. I have further refined this model to simulate spindle formation and kinetochore capture in the fission yeast S. pombe. I then make predictions for experimentally realizable perturbations in motor protein presence and function in S. pombe.

  14. El proyecto Shere Rom. Fundamentos de una comunidad de prácticas para la inclusión educativa

    Directory of Open Access Journals (Sweden)

    Marta Padrós

    2015-02-01

    Full Text Available En este artículo se analizan los fundamentos de la sostenibilidad del Proyecto Shere Rom, una red de comunidades de prácticas basadas en el modelo de la Quinta Dimensión. Esta red, coordinada por un servicio de Psicología aplicada de la Universidad Autónoma de Barcelona, cuenta con diversos centros de actividad fuera y dentro de la escuela, en entornos con alto riesgo de exclusión social, y con participantes pertenecientes a minorías culturales entre las que predomina la de los gitanos. Desde una perspectiva propia de la Psicología Cultural, se identifican cinco elementos que dotan de sentido a la participación en las actividades del proyecto y que explican su continuidad a lo largo de los últimos 15 años: adecuación tecnológica, carácter colaborativo, apropiabilidad, narratividad y agentividad. // This article describes the basics of sustainability of Shere Rom's Project, a network of practice communities based on Fifth Dimension model. This network, coordinated by a service of Applied Psychology at Universitat Autònoma de Barcelona, has several activity centers in and outside school, in environments with high risk of social exclusion, with participants from cultural minorities -being Roma community the predominant group-. From a cultural psychology perspective, are identified five elements that give meaning to participation in project activities and explain its continuity over the last 15 years: technological adaptation, collaborative nature, appropriability, narrativity and agentivity.

  15. Systemic change increases model projection uncertainty

    NARCIS (Netherlands)

    Verstegen, Judith; Karssenberg, Derek; van der Hilst, Floortje; Faaij, André

    2014-01-01

    Most spatio-temporal models are based on the assumption that the relationship between system state change and its explanatory processes is stationary. This means that model structure and parameterization are usually kept constant over time, ignoring potential systemic changes in this relationship re

  16. Dynamic modeling of the INAPRO aquaponic system

    NARCIS (Netherlands)

    Karimanzira, Divas; Keesman, Karel J.; Kloas, Werner; Baganz, Daniela; Rauschenbach, Thomas

    2016-01-01

    The use of modeling techniques to analyze aquaponics systems is demonstrated with an example of dynamic modeling for the production of Nile tilapia (Oreochromis niloticus) and tomatoes (Solanum lycopersicon) using the innovative double recirculating aquaponic system ASTAF-PRO. For the management and

  17. Modeling complex work systems - method meets reality

    NARCIS (Netherlands)

    van der Veer, Gerrit C.; Hoeve, Machteld; Lenting, Bert

    1996-01-01

    Modeling an existing task situation is often a first phase in the (re)design of information systems. For complex systems design, this model should consider both the people and the organization involved, the work, and situational aspects. Groupware Task Analysis (GTA) as part of a method for the

  18. Modeling complex work systems - method meets reality

    NARCIS (Netherlands)

    Veer, van der Gerrit C.; Hoeve, Machteld; Lenting, Bert F.

    1996-01-01

    Modeling an existing task situation is often a first phase in the (re)design of information systems. For complex systems design, this model should consider both the people and the organization involved, the work, and situational aspects. Groupware Task Analysis (GTA) as part of a method for the desi

  19. System dynamics modelling of situation awareness

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2015-11-01

    Full Text Available . The feedback loops and delays in the Command and Control system also contribute to the complex dynamic behavior. This paper will build on existing situation awareness models to develop a System Dynamics model to support a qualitative investigation through...

  20. Statistical Model Checking for Stochastic Hybrid Systems

    DEFF Research Database (Denmark)

    David, Alexandre; Du, Dehui; Larsen, Kim Guldstrand

    2012-01-01

    This paper presents novel extensions and applications of the UPPAAL-SMC model checker. The extensions allow for statistical model checking of stochastic hybrid systems. We show how our race-based stochastic semantics extends to networks of hybrid systems, and indicate the integration technique ap...

  1. Models of the venous system

    DEFF Research Database (Denmark)

    Mehlsen, J

    2000-01-01

    Cardiac output is largely controlled by venous return, the driving force of which is the energy remaining at the postcapillary venous site. This force is influenced by forces acting close to the right atrium, and internally or externally upon the veins along their course. Analogue models....... The venous capacitance is also non-linear, but may be considered linear under certain conditions. The models have to include time varying pressure sources created by respiration and skeletal muscles, and if the description includes the upright position, the partly unidirectional flow through the venous...

  2. Operational ocean models in the Adriatic Sea: a skill assessment

    Directory of Open Access Journals (Sweden)

    J. Chiggiato

    2008-02-01

    Full Text Available In the framework of the Mediterranean Forecasting System (MFS project, the performance of regional numerical ocean forecasting systems is assessed by means of model-model and model-data comparison. Three different operational systems considered in this study are: the Adriatic REGional Model (AREG; the Adriatic Regional Ocean Modelling System (AdriaROMS and the Mediterranean Forecasting System General Circulation Model (MFS-GCM. AREG and AdriaROMS are regional implementations (with some dedicated variations of POM and ROMS, respectively, while MFS-GCM is an OPA based system. The assessment is done through standard scores. In situ and remote sensing data are used to evaluate the system performance. In particular, a set of CTD measurements collected in the whole western Adriatic during January 2006 and one year of satellite derived sea surface temperature measurements (SST allow to asses a full three-dimensional picture of the operational forecasting systems quality during January 2006 and to draw some preliminary considerations on the temporal fluctuation of scores estimated on surface quantities between summer 2005 and summer 2006.

    The regional systems share a negative bias in simulated temperature and salinity. Nonetheless, they outperform the MFS-GCM in the shallowest locations. Results on amplitude and phase errors are improved in areas shallower than 50 m, while degraded in deeper locations, where major models deficiencies are related to vertical mixing overestimation. In a basin-wide overview, the two regional models show differences in the local displacement of errors. In addition, in locations where the regional models are mutually correlated, the aggregated mean squared error was found to be smaller, that is a useful outcome of having several operational systems in the same region.

  3. Systematic modelling and simulation of refrigeration systems

    DEFF Research Database (Denmark)

    Rasmussen, Bjarne D.; Jakobsen, Arne

    1998-01-01

    The task of developing a simulation model of a refrigeration system can be very difficult and time consuming. In order for this process to be effective, a systematic method for developing the system model is required. This method should aim at guiding the developer to clarify the purpose of the s......The task of developing a simulation model of a refrigeration system can be very difficult and time consuming. In order for this process to be effective, a systematic method for developing the system model is required. This method should aim at guiding the developer to clarify the purpose...... of the simulation, to select appropriate component models and to set up the equations in a well-arranged way. In this paper the outline of such a method is proposed and examples showing the use of this method for simulation of refrigeration systems are given....

  4. Heating, ventilation and air conditioning system modelling

    Energy Technology Data Exchange (ETDEWEB)

    Whalley, R.; Abdul-Ameer, A. [British University in Dubai (United Arab Emirates)

    2011-03-15

    Heating, ventilation and air conditioning modelling methods, for large scale, spatially dispersed systems are considered. Existing techniques are discussed and proposals for the application of novel analysis approaches are outlined. The use of distributed-lumped parameter procedures enabling the incorporation of the relatively concentrated and significantly dispersed, system element characteristics, is advocated. A dynamic model for a heating, ventilation and air conditioning system comprising inlet and exhaust fans, with air recirculation, heating/cooling and filtration units is presented. Pressure, airflow and temperature predictions within the system are computed following input, disturbance changes and purging operations. The generalised modelling advancements adopted and the applicability of the model for heating, ventilation and air conditioning system simulation, re-configuration and diagnostics is emphasised. The employment of the model for automatic, multivariable controller design purposes is commented upon. (author)

  5. Model Driven Development of Data Sensitive Systems

    DEFF Research Database (Denmark)

    Olsen, Petur

    2014-01-01

    Model-driven development strives to use formal artifacts during the development process. Formal artifacts enables automatic analyses of some aspects of the system under development. This serves to increase the understanding of the (intended) behavior of the system as well as increasing error...... detection and pushing error detection to earlier stages of development. The complexity of modeling and the size of systems which can be analyzed is severely limited when introducing data variables. The state space grows exponentially in the number of variable and the domain size of the variables...... to the values of variables. This theses strives to improve model-driven development of such data-sensitive systems. This is done by addressing three research questions. In the first we combine state-based modeling and abstract interpretation, in order to ease modeling of data-sensitive systems, while allowing...

  6. Modeling and analysis of stochastic systems

    CERN Document Server

    Kulkarni, Vidyadhar G

    2011-01-01

    Based on the author's more than 25 years of teaching experience, Modeling and Analysis of Stochastic Systems, Second Edition covers the most important classes of stochastic processes used in the modeling of diverse systems, from supply chains and inventory systems to genetics and biological systems. For each class of stochastic process, the text includes its definition, characterization, applications, transient and limiting behavior, first passage times, and cost/reward models. Along with reorganizing the material, this edition revises and adds new exercises and examples. New to the second edi

  7. What controls biological production in coastal upwelling systems? Insights from a comparative modeling study

    Directory of Open Access Journals (Sweden)

    Z. Lachkar

    2011-10-01

    Full Text Available The magnitude of net primary production (NPP in Eastern Boundary Upwelling Systems (EBUS is traditionally viewed as directly reflecting the wind-driven upwelling intensity. Yet, different EBUS show different sensitivities of NPP to upwelling-favorable winds (Carr and Kearns, 2003. Here, using a comparative modeling study of the California Current System (California CS and Canary Current System (Canary CS, we show how physical and environmental factors, such as light, temperature and cross-shore circulation modulate the response of NPP to upwelling strength. To this end, we made a series of eddy-resolving simulations of the two upwelling systems using the Regional Oceanic Modeling System (ROMS, coupled to a nitrogen-based Nutrient-Phytoplankton-Zooplankton-Detritus (NPZD ecosystem model. Using identical ecological/biogeochemical parameters, our coupled model simulates a level of NPP in the California CS that is 50 % smaller than that in the Canary CS, in agreement with observationally based estimates. We find this much lower NPP in the California CS despite phytoplankton in this system having nearly 20 % higher nutrient concentrations available to fuel their growth. This conundrum can be explained by: (1 phytoplankton having a faster nutrient-replete growth in the Canary CS relative to the California CS; a consequence of more favorable light and temperature conditions in the Canary CS, and (2 the longer nearshore water residence times in the Canary CS, which permit a larger buildup of biomass in the upwelling zone, thereby enhancing NPP. The longer residence times in the Canary CS appear to be a result of the wider continental shelves and the lower mesoscale activity characterizing this upwelling system. This results in a weaker offshore export of nutrients and organic matter, thereby increasing local nutrient recycling and reducing the spatial decoupling between new and export production in the Canary CS. Our results suggest that climate change

  8. System Convergence in Transport Modelling

    DEFF Research Database (Denmark)

    Rich, Jeppe; Nielsen, Otto Anker; Cantarella, Guilio E.

    2010-01-01

    -of-successive-averages (MSA) have been proposed. Convergence of the MSA under fairly weak regularity conditions was shown in Robbins and Monro (1951). The iteration between demand and assignment ? the external equilibrium ? are in many models either decoupled or follow a very simple iteration pattern. However, as demand...

  9. Models of the venous system

    DEFF Research Database (Denmark)

    Mehlsen, J

    2000-01-01

    . The venous capacitance is also non-linear, but may be considered linear under certain conditions. The models have to include time varying pressure sources created by respiration and skeletal muscles, and if the description includes the upright position, the partly unidirectional flow through the venous...

  10. Systems Engineering Model for ART Energy Conversion

    Energy Technology Data Exchange (ETDEWEB)

    Mendez Cruz, Carmen Margarita [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rochau, Gary E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wilson, Mollye C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-02-01

    The near-term objective of the EC team is to establish an operating, commercially scalable Recompression Closed Brayton Cycle (RCBC) to be constructed for the NE - STEP demonstration system (demo) with the lowest risk possible. A systems engineering approach is recommended to ensure adequate requirements gathering, documentation, and mode ling that supports technology development relevant to advanced reactors while supporting crosscut interests in potential applications. A holistic systems engineering model was designed for the ART Energy Conversion program by leveraging Concurrent Engineering, Balance Model, Simplified V Model, and Project Management principles. The resulting model supports the identification and validation of lifecycle Brayton systems requirements, and allows designers to detail system-specific components relevant to the current stage in the lifecycle, while maintaining a holistic view of all system elements.

  11. Building multivariate systems biology models

    NARCIS (Netherlands)

    Kirwan, G.M.; Johansson, E.; Kleemann, R.; Verheij, E.R.; Wheelock, A.M.; Goto, S.; Trygg, J.; Wheelock, C.E.

    2012-01-01

    Systems biology methods using large-scale "omics" data sets face unique challenges: integrating and analyzing near limitless data space, while recognizing and removing systematic variation or noise. Herein we propose a complementary multivariate analysis workflow to both integrate "omics" data from

  12. Models of complex attitude systems

    DEFF Research Database (Denmark)

    Sørensen, Bjarne Taulo

    production, food and the environment, technological progress, animal welfare, local employment and the local economy. In addition, the survey included a conjoint task by which participants’ evaluations of the importance of production system attributes were measured. The data were analysed by means of causal...

  13. Adsorption Rate Models for Multicomponent Adsorption Systems

    Institute of Scientific and Technical Information of China (English)

    姚春才

    2004-01-01

    Three adsorption rate models are derived for multicomponent adsorption systems under either pore diffusion or surface diffusion control. The linear driving force (LDF) model is obtained by assuming a parabolic intraparticle concentration profile. Models I and Ⅱ are obtained from the parabolic concentration layer approximation. Examples are presented to demonstrate the usage and accuracy of these models. It is shown that Model I is suitable for batch adsorption calculations and Model Ⅱ provides a good approximation in fixed-bed adsorption processes while the LDF model should not be used in batch adsorption and may be considered acceptable in fixed-bed adsorption where the parameter Ti is relatively large.

  14. Modeling approach suitable for energy system

    Energy Technology Data Exchange (ETDEWEB)

    Goetschel, D. V.

    1979-01-01

    Recently increased attention has been placed on optimization problems related to the determination and analysis of operating strategies for energy systems. Presented in this paper is a nonlinear model that can be used in the formulation of certain energy-conversion systems-modeling problems. The model lends itself nicely to solution approaches based on nonlinear-programming algorithms and, in particular, to those methods falling into the class of variable metric algorithms for nonlinearly constrained optimization.

  15. Development and application of earth system models

    OpenAIRE

    Prinn, Ronald G.

    2012-01-01

    The global environment is a complex and dynamic system. Earth system modeling is needed to help understand changes in interacting subsystems, elucidate the influence of human activities, and explore possible future changes. Integrated assessment of environment and human development is arguably the most difficult and most important “systems” problem faced. To illustrate this approach, we present results from the integrated global system model (IGSM), which consists of coupled submodels address...

  16. Statistical Model Checking for Stochastic Hybrid Systems

    DEFF Research Database (Denmark)

    David, Alexandre; Du, Dehui; Larsen, Kim Guldstrand

    2012-01-01

    This paper presents novel extensions and applications of the UPPAAL-SMC model checker. The extensions allow for statistical model checking of stochastic hybrid systems. We show how our race-based stochastic semantics extends to networks of hybrid systems, and indicate the integration technique...... applied for implementing this semantics in the UPPAAL-SMC simulation engine. We report on two applications of the resulting tool-set coming from systems biology and energy aware buildings....

  17. A model for international border management systems.

    Energy Technology Data Exchange (ETDEWEB)

    Duggan, Ruth Ann

    2008-09-01

    To effectively manage the security or control of its borders, a country must understand its border management activities as a system. Using its systems engineering and security foundations as a Department of Energy National Security Laboratory, Sandia National Laboratories has developed such an approach to modeling and analyzing border management systems. This paper describes the basic model and its elements developed under Laboratory Directed Research and Development project 08-684.

  18. A Conceptual Data Model of Datum Systems

    Science.gov (United States)

    McCaleb, Michael R.

    1999-01-01

    A new conceptual data model that addresses the geometric dimensioning and tolerancing concepts of datum systems, datums, datum features, datum targets, and the relationships among these concepts, is presented. Additionally, a portion of a related data model, Part 47 of STEP (ISO 10303-47), is reviewed and a comparison is made between it and the new conceptual data model.

  19. Modelling of Generic Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; La Cour-Harbo, Anders

    2006-01-01

    This paper presents the result of modelling and verification of a generic slung load system using a small-scale helicopter. The model is intended for use in simulation, pilot training, estimation, and control. The model is derived using a redundant coordinate formulation based on Gauss Principle ...

  20. Human performance modeling for system of systems analytics.

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Kevin R.; Lawton, Craig R.; Basilico, Justin Derrick; Longsine, Dennis E. (INTERA, Inc., Austin, TX); Forsythe, James Chris; Gauthier, John Henry; Le, Hai D.

    2008-10-01

    A Laboratory-Directed Research and Development project was initiated in 2005 to investigate Human Performance Modeling in a System of Systems analytic environment. SAND2006-6569 and SAND2006-7911 document interim results from this effort; this report documents the final results. The problem is difficult because of the number of humans involved in a System of Systems environment and the generally poorly defined nature of the tasks that each human must perform. A two-pronged strategy was followed: one prong was to develop human models using a probability-based method similar to that first developed for relatively well-understood probability based performance modeling; another prong was to investigate more state-of-art human cognition models. The probability-based modeling resulted in a comprehensive addition of human-modeling capability to the existing SoSAT computer program. The cognitive modeling resulted in an increased understanding of what is necessary to incorporate cognition-based models to a System of Systems analytic environment.

  1. Complex system modelling for veterinary epidemiology.

    Science.gov (United States)

    Lanzas, Cristina; Chen, Shi

    2015-02-01

    The use of mathematical models has a long tradition in infectious disease epidemiology. The nonlinear dynamics and complexity of pathogen transmission pose challenges in understanding its key determinants, in identifying critical points, and designing effective mitigation strategies. Mathematical modelling provides tools to explicitly represent the variability, interconnectedness, and complexity of systems, and has contributed to numerous insights and theoretical advances in disease transmission, as well as to changes in public policy, health practice, and management. In recent years, our modelling toolbox has considerably expanded due to the advancements in computing power and the need to model novel data generated by technologies such as proximity loggers and global positioning systems. In this review, we discuss the principles, advantages, and challenges associated with the most recent modelling approaches used in systems science, the interdisciplinary study of complex systems, including agent-based, network and compartmental modelling. Agent-based modelling is a powerful simulation technique that considers the individual behaviours of system components by defining a set of rules that govern how individuals ("agents") within given populations interact with one another and the environment. Agent-based models have become a recent popular choice in epidemiology to model hierarchical systems and address complex spatio-temporal dynamics because of their ability to integrate multiple scales and datasets.

  2. Review of Yanomamö Interactive: The Ax Fight. Peter Biella, Napoleon A. Chagnon and Gary Seaman. Harcourt Brace and Company, 1997 [ISBN 0-15-507653-1] [CD-ROM

    OpenAIRE

    2000-01-01

    In an as yet unpublished paper on computer-assisted visual anthropology, Michael D Fischer and David Zeitlyn [1] describe a 'book model' approach to multimedia, not strictly sequenced, but essentially consisting of a main text with hyperlinks to supporting information. At first glance this CD-ROM appears to conform to this model: a dominant text, in this case a complete digitization of Tim Asch and Napoleon Chagnon's 1974 film The Ax Fight, supplemented with a variety of additional informatio...

  3. Using Interaction Scenarios to Model Information Systems

    DEFF Research Database (Denmark)

    Bækgaard, Lars; Bøgh Andersen, Peter

    The purpose of this paper is to define and discuss a set of interaction primitives that can be used to model the dynamics of socio-technical activity systems, including information systems, in a way that emphasizes structural aspects of the interaction that occurs in such systems. The primitives...

  4. Port-based modeling of mechatronic systems

    NARCIS (Netherlands)

    Breedveld, Peter C.

    2004-01-01

    Many engineering activities, including mechatronic design, require that a multidomain or ‘multi-physics’ system and its control system be designed as an integrated system. This contribution discusses the background and tools for a port-based approach to integrated modeling and simulation of physical

  5. Lattice models of ionic systems

    Science.gov (United States)

    Kobelev, Vladimir; Kolomeisky, Anatoly B.; Fisher, Michael E.

    2002-05-01

    A theoretical analysis of Coulomb systems on lattices in general dimensions is presented. The thermodynamics is developed using Debye-Hückel theory with ion-pairing and dipole-ion solvation, specific calculations being performed for three-dimensional lattices. As for continuum electrolytes, low-density results for simple cubic (sc), body-centered cubic (bcc), and face-centered cubic (fcc) lattices indicate the existence of gas-liquid phase separation. The predicted critical densities have values comparable to those of continuum ionic systems, while the critical temperatures are 60%-70% higher. However, when the possibility of sublattice ordering as well as Debye screening is taken into account systematically, order-disorder transitions and a tricritical point are found on sc and bcc lattices, and gas-liquid coexistence is suppressed. Our results agree with recent Monte Carlo simulations of lattice electrolytes.

  6. Data assimilation in a coupled physical-biogeochemical model of the California Current System using an incremental lognormal 4-dimensional variational approach: Part 1-Model formulation and biological data assimilation twin experiments

    Science.gov (United States)

    Song, Hajoon; Edwards, Christopher A.; Moore, Andrew M.; Fiechter, Jerome

    2016-10-01

    A quadratic formulation for an incremental lognormal 4-dimensional variational assimilation method (incremental L4DVar) is introduced for assimilation of biogeochemical observations into a 3-dimensional ocean circulation model. L4DVar assumes that errors in the model state are lognormally rather than Gaussian distributed, and implicitly ensures that state estimates are positive definite, making this approach attractive for biogeochemical variables. The method is made practical for a realistic implementation having a large state vector through linear assumptions that render the cost function quadratic and allow application of existing minimization techniques. A simple nutrient-phytoplankton-zooplankton-detritus (NPZD) model is coupled to the Regional Ocean Modeling System (ROMS) and configured for the California Current System. Quadratic incremental L4DVar is evaluated in a twin model framework in which biological fields only are in error and compared to G4DVar which assumes Gaussian distributed errors. Five-day assimilation cycles are used and statistics from four years of model integration analyzed. The quadratic incremental L4DVar results in smaller root-mean-squared errors and better statistical agreement with reference states than G4DVar while maintaining a positive state vector. The additional computational cost and implementation effort are trivial compared to the G4DVar system, making quadratic incremental L4DVar a practical and beneficial option for realistic biogeochemical state estimation in the ocean.

  7. Archive of mass spectral data files on recordable CD-ROMs and creation and maintenance of a searchable computerized database.

    Science.gov (United States)

    Amick, G D

    1999-01-01

    A database containing names of mass spectral data files generated in a forensic toxicology laboratory and two Microsoft Visual Basic programs to maintain and search this database is described. The data files (approximately 0.5 KB/each) were collected from six mass spectrometers during routine casework. Data files were archived on 650 MB (74 min) recordable CD-ROMs. Each recordable CD-ROM was given a unique name, and its list of data file names was placed into the database. The present manuscript describes the use of search and maintenance programs for searching and routine upkeep of the database and creation of CD-ROMs for archiving of data files.

  8. On the Feasibility of Using LDOCE4 on CD-ROM to Assist EFL Students’Writing

    Institute of Scientific and Technical Information of China (English)

    柳轶群; 赵鹏

    2013-01-01

    Various kinds of paper dictionaries cannot satisfy the productive needs of EFL/ESL learners. With this in mind, McAlp-ine and Myles designed a new type of monolingual electronic dictionary. Coincidentally, the fourth edition of the Longman Dic-tionary of Contemporary English (LDOCE) (Summers 2003) was published with a supporting CD-ROM in 2003. The per-ceived guiding principle of the CD-ROM design was remarkably similar to that of McAlpine and Myles ’design. It can be as-sumed that the CD-ROM will provide EFL/ESL learners with strong support in their writing.

  9. Quantitative Models and Analysis for Reactive Systems

    DEFF Research Database (Denmark)

    Thrane, Claus

    phones and websites. Acknowledging that now more than ever, systems come in contact with the physical world, we need to revise the way we construct models and verification algorithms, to take into account the behavior of systems in the presence of approximate, or quantitative information, provided...... by the environment in which they are embedded. This thesis studies the semantics and properties of a model-based framework for re- active systems, in which models and specifications are assumed to contain quantifiable information, such as references to time or energy. Our goal is to develop a theory of approximation......, by studying how small changes to our models affect the verification results. A key source of motivation for this work can be found in The Embedded Systems Design Challenge [HS06] posed by Thomas A. Henzinger and Joseph Sifakis. It contains a call for advances in the state-of-the-art of systems verification...

  10. Simulation Model of Brushless Excitation System

    Directory of Open Access Journals (Sweden)

    Ahmed N.A.  Alla

    2007-01-01

    Full Text Available Excitation system is key element in the dynamic performance of electric power systems, accurate excitation models are of great importance in simulating and investigating the power system transient phenomena. Parameter identification of the Brushless excitation system was presented. First a block diagram for the EXS parameter was proposed based on the documents and maps in the power station. To identify the parameters of this model, a test procedure to obtain step response, was presented. Using the Genetic Algorithm with the Matlab-software it was possible to identify all the necessary parameters of the model. Using the same measured input signals the response from the standard model showed nearly the same behavior as the excitation system.

  11. Mechatronic Systems Design Methods, Models, Concepts

    CERN Document Server

    Janschek, Klaus

    2012-01-01

    In this textbook, fundamental methods for model-based design of mechatronic systems are presented in a systematic, comprehensive form. The method framework presented here comprises domain-neutral methods for modeling and performance analysis: multi-domain modeling (energy/port/signal-based), simulation (ODE/DAE/hybrid systems), robust control methods, stochastic dynamic analysis, and quantitative evaluation of designs using system budgets. The model framework is composed of analytical dynamic models for important physical and technical domains of realization of mechatronic functions, such as multibody dynamics, digital information processing and electromechanical transducers. Building on the modeling concept of a technology-independent generic mechatronic transducer, concrete formulations for electrostatic, piezoelectric, electromagnetic, and electrodynamic transducers are presented. More than 50 fully worked out design examples clearly illustrate these methods and concepts and enable independent study of th...

  12. Improvements in continuum modeling for biomolecular systems

    CERN Document Server

    Qiao, Yu

    2015-01-01

    Modeling of biomolecular systems plays an essential role in understanding biological processes, such as ionic flow across channels, protein modification or interaction, and cell signaling. The continuum model described by the Poisson-Boltzmann (PB)/Poisson-Nernst-Planck (PNP) equations has made great contributions towards simulation of these processes. However, the model has shortcomings in its commonly used form and cannot capture (or cannot accurately capture) some important physical properties of biological systems. Considerable efforts have been made to improve the continuum model to account for discrete particle interactions and to make progress in numerical methods to provide accurate and efficient simulation. This review will summarize recent main improvements in continuum modeling for biomolecular systems, with focus on the size-modified models, the coupling of the classical density functional theory and PNP equations, the coupling of polar and nonpolar interactions, and numerical progress.

  13. Structural system identification: Structural dynamics model validation

    Energy Technology Data Exchange (ETDEWEB)

    Red-Horse, J.R.

    1997-04-01

    Structural system identification is concerned with the development of systematic procedures and tools for developing predictive analytical models based on a physical structure`s dynamic response characteristics. It is a multidisciplinary process that involves the ability (1) to define high fidelity physics-based analysis models, (2) to acquire accurate test-derived information for physical specimens using diagnostic experiments, (3) to validate the numerical simulation model by reconciling differences that inevitably exist between the analysis model and the experimental data, and (4) to quantify uncertainties in the final system models and subsequent numerical simulations. The goal of this project was to develop structural system identification techniques and software suitable for both research and production applications in code and model validation.

  14. FSM Model of a Simple Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Martina Latkova

    2015-01-01

    Full Text Available The paper describes a simulation model of a simple photovoltaic system intended as a tool for testing the use of finite state machines for simulations representing a long-term operation of renewable energy sources. The mathematical model of the photovoltaic system is described first. Then it is used to build a finite state machine model that calculates a power output of the photovoltaic system for changing values of a solar irradiance and a temperature. Data measured on a real photovoltaic installation are used to verify model’s accuracy through its comparison with a previously created and verified Matlab model. The finite state machine model presented in this paper was created using Ptolemy II software.

  15. Simulation-based Manufacturing System Modeling

    Institute of Scientific and Technical Information of China (English)

    卫东; 金烨; 范秀敏; 严隽琪

    2003-01-01

    In recent years, computer simulation appears to be very advantageous technique for researching the resource-constrained manufacturing system. This paper presents an object-oriented simulation modeling method, which combines the merits of traditional methods such as IDEF0 and Petri Net. In this paper, a four-layer-one-angel hierarchical modeling framework based on OOP is defined. And the modeling description of these layers is expounded, such as: hybrid production control modeling and human resource dispatch modeling. To validate the modeling method, a case study of an auto-product line in a motor manufacturing company has been carried out.

  16. Modelling of Generic Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; La Cour-Harbo, Anders

    2006-01-01

    of Least Constraint using the Udwadia-Kalaba equation and can be used to model all body to body slung load suspension types. The model gives an intuitive and easy-to-use way of modelling and simulating di erent slung load suspension types and it includes detection and response of wire slacking......This paper presents the result of modelling and verification of a generic slung load system using a small-scale helicopter. The model is intended for use in simulation, pilot training, estimation, and control. The model is derived using a redundant coordinate formulation based on Gauss Principle...

  17. HVDC System Characteristics and Simulation Models

    Energy Technology Data Exchange (ETDEWEB)

    Moon, S.I.; Han, B.M.; Jang, G.S. [Electric Enginnering and Science Research Institute, Seoul (Korea)

    2001-07-01

    This report deals with the AC-DC power system simulation method by PSS/E and EUROSTAG for the development of a strategy for the reliable operation of the Cheju-Haenam interconnected system. The simulation using both programs is performed to analyze HVDC simulation models. In addition, the control characteristics of the Cheju-Haenam HVDC system as well as Cheju AC system characteristics are described in this work. (author). 104 figs., 8 tabs.

  18. Nonlinear model predictive control for chemical looping process

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, Abhinaya; Lei, Hao; Lou, Xinsheng

    2017-08-22

    A control system for optimizing a chemical looping ("CL") plant includes a reduced order mathematical model ("ROM") that is designed by eliminating mathematical terms that have minimal effect on the outcome. A non-linear optimizer provides various inputs to the ROM and monitors the outputs to determine the optimum inputs that are then provided to the CL plant. An estimator estimates the values of various internal state variables of the CL plant. The system has one structure adapted to control a CL plant that only provides pressure measurements in the CL loops A and B, a second structure adapted to a CL plant that provides pressure measurements and solid levels in both loops A, and B, and a third structure adapted to control a CL plant that provides full information on internal state variables. A final structure provides a neural network NMPC controller to control operation of loops A and B.

  19. O reto-românico: unidade e fragmentação

    Directory of Open Access Journals (Sweden)

    Mário Eduardo Viaro

    2011-07-01

    Full Text Available Resumo: Os manuais de linguística ou filologia românica costumam incluir o reto-românico como uma das principais línguas neolatinas, ao lado do português, espanhol, francês, italiano e romeno. No entanto, tal denominação refere-se na verdade a um conjunto extremamente heterogêneo de línguas, com uma profunda fragmentação dialetal. Acresce-se a isso o recente problema da padronização da norma escrita. Este artigo  pretende especificamente apresentar a situação linguística atual dos Grisões e o problema da convivência do romanche com os dialetos alemães e o italianos. Palavras-chave: Reto-românico; dialetologia; contato linguístico. Resumen: Los manuales de linguística o filología románica costumbran incluir el reto-románico como una de las principales lenguas neolatinas, al lado del portugués, español, francés, italiano y rumano. Pero tal denominación se refere en la realidad a un conjunto extremamente heterogéneo de lenguas, con una profunda fragmentación dialectal. Se añade a eso el reciente problema de la estandarización de la norma escrita. Este artículo pretende especificamente presentar la situación linguística actual de los Grisones y el problema de la convivencia del romanche con los dialectos alemanes e italianos.Palabras-clave: Reto-románico; dialectología; contacto linguístico. Abstract: Raeto-Romance is usually included, as well as Portuguese, Spanish, French, Italian and Rumanian, among the main Neolatin languages in the handbooks about Romance Philology or Linguistics. However, an extremely heterogeneous set of very different languages, with a huge dialect splitting is meant by such denomination. The problem is also increased with the recent standardization of the written language. The current linguistic situation of the Grisons is specifically dealt in this paper, as well as the coexistence of the Rumantsch language together with the German and the Italian dialects.Keywords: Rhaeto

  20. Modeling the Dynamics of an Information System

    Directory of Open Access Journals (Sweden)

    Jacek Unold

    2003-11-01

    Full Text Available The article concentrates on the nature of a social subsystem of an information system. It analyzes the nature of information processes of collectivity within an IS and introduces a model of IS dynamics. The model is based on the assumption that a social subsystem of an information system works as a nonlinear dynamic system. The model of IS dynamics is verified on the indexes of the stock market. It arises from the basic assumption of the technical analysis of the markets, that is, the index chart reflects the play of demand and supply, which in turn represents the crowd sentiment on the market.

  1. Systematic modelling and simulation of refrigeration systems

    DEFF Research Database (Denmark)

    Rasmussen, Bjarne D.; Jakobsen, Arne

    1998-01-01

    The task of developing a simulation model of a refrigeration system can be very difficult and time consuming. In order for this process to be effective, a systematic method for developing the system model is required. This method should aim at guiding the developer to clarify the purpose...... of the simulation, to select appropriate component models and to set up the equations in a well-arranged way. In this paper the outline of such a method is proposed and examples showing the use of this method for simulation of refrigeration systems are given....

  2. MODEL DRIVEN DEVELOPMENT OF ONLINE BANKING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Bresfelean Vasile Paul

    2011-07-01

    Full Text Available In case of online applications the cycle of software development varies from the routine. The online environment, the variety of users, the treatability of the mass of information created by them, the reusability and the accessibility from different devices are all factors of these systems complexity. The use of model drive approach brings several advantages that ease up the development process. Working prototypes that simplify client relationship and serve as the base of model tests can be easily made from models describing the system. These systems make possible for the banks clients to make their desired actions from anywhere. The user has the possibility of accessing information or making transactions.

  3. Development and Integration of Control System Models

    Science.gov (United States)

    Kim, Young K.

    1998-01-01

    The computer simulation tool, TREETOPS, has been upgraded and used at NASA/MSFC to model various complicated mechanical systems and to perform their dynamics and control analysis with pointing control systems. A TREETOPS model of Advanced X-ray Astrophysics Facility - Imaging (AXAF-1) dynamics and control system was developed to evaluate the AXAF-I pointing performance for Normal Pointing Mode. An optical model of Shooting Star Experiment (SSE) was also developed and its optical performance analysis was done using the MACOS software.

  4. Models for the study of whole systems.

    Science.gov (United States)

    Bell, Iris R; Koithan, Mary

    2006-12-01

    This article summarizes a network and complex systems science model for research on whole systems of complementary and alternative medicine (CAM) such as homeopathy and traditional Chinese medicine. The holistic concepts of networks and nonlinear dynamical complex systems are well matched to the global and interactive perspectives of whole systems of CAM, whereas the reductionistic science model is well matched to the isolated local organ, cell, and molecular mechanistic perspectives of pharmaceutically based biomedicine. Whole systems of CAM are not drugs with specific actions. The diagnostic and therapeutic approaches of whole systems of CAM produce effects that involve global and patterned shifts across multiple subsystems of the person as a whole. For homeopathy, several characteristics of complex systems, including the probabilistic nature of attractor patterns, variable sensitivity of complex systems to initial conditions, and emergent behaviors in the evolution of a system in its full environmental context over time, could help account for the mixed basic science and controlled clinical trial research findings, in contrast with the consistently positive outcomes of observational studies in the literature. Application of theories and methods from complex systems and network science can open a new era of advances in understanding factors that lead to good versus poor individual global outcome patterns and to rational triage of patients to one type of care over another. The growing reliance on complex systems thinking and systems biology for cancer research affords a unique opportunity to bridge between the CAM and conventional medical worlds with some common language and conceptual models.

  5. Use of an operational model evaluation system for model intercomparison

    Energy Technology Data Exchange (ETDEWEB)

    Foster, K. T., LLNL

    1998-03-01

    The Atmospheric Release Advisory Capability (ARAC) is a centralized emergency response system used to assess the impact from atmospheric releases of hazardous materials. As part of an on- going development program, new three-dimensional diagnostic windfield and Lagrangian particle dispersion models will soon replace ARAC`s current operational windfield and dispersion codes. A prototype model performance evaluation system has been implemented to facilitate the study of the capabilities and performance of early development versions of these new models relative to ARAC`s current operational codes. This system provides tools for both objective statistical analysis using common performance measures and for more subjective visualization of the temporal and spatial relationships of model results relative to field measurements. Supporting this system is a database of processed field experiment data (source terms and meteorological and tracer measurements) from over 100 individual tracer releases.

  6. Evaluation of SystemC Modelling of Reconfigurable Embedded Systems

    CERN Document Server

    Rissa, Tero; Luk, Wayne

    2011-01-01

    This paper evaluates the use of pin and cycle accurate SystemC models for embedded system design exploration and early software development. The target system is MicroBlaze VanillaNet Platform running MicroBlaze uClinux operating system. The paper compares Register Transfer Level (RTL) Hardware Description Language (HDL) simulation speed to the simulation speed of several different SystemC models. It is shown that simulation speed of pin and cycle accurate models can go up to 150 kHz, compared to 100 Hz range of HDL simulation. Furthermore, utilising techniques that temporarily compromise cycle accuracy, effective simulation speed of up to 500 kHz can be obtained.

  7. Modeling of Generic Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; la Cour-Harbo, Anders

    2009-01-01

    This paper presents the result of the modelling and verification of a generic slung load system using a small-scale helicopter. The model is intended for use in simulation, pilot training, estimation, and control. The model is derived using a redundant coordinate formulation based on Gauss......' Principle of Least Constraint using the Udwadia-Kalaba equation and can be used to model all body to body slung load suspension types. The model provides intuitive and easy-to-use means of modelling and simulating different slung load suspension types. It includes detection of, and response to, wire...... slackening and tightening as well as aerodynamic coupling between the helicopter and the load. Furthermore, it is shown how the model can be easily used for multi-lift systems either with multiple helicopters or multiple loads. A numerical stabilisation algorithm is introduced and finally the use...

  8. Systems Evaluation Methods, Models, and Applications

    CERN Document Server

    Liu, Siefeng; Xie, Naiming; Yuan, Chaoqing

    2011-01-01

    A book in the Systems Evaluation, Prediction, and Decision-Making Series, Systems Evaluation: Methods, Models, and Applications covers the evolutionary course of systems evaluation methods, clearly and concisely. Outlining a wide range of methods and models, it begins by examining the method of qualitative assessment. Next, it describes the process and methods for building an index system of evaluation and considers the compared evaluation and the logical framework approach, analytic hierarchy process (AHP), and the data envelopment analysis (DEA) relative efficiency evaluation method. Unique

  9. Analytical performance modeling for computer systems

    CERN Document Server

    Tay, Y C

    2013-01-01

    This book is an introduction to analytical performance modeling for computer systems, i.e., writing equations to describe their performance behavior. It is accessible to readers who have taken college-level courses in calculus and probability, networking and operating systems. This is not a training manual for becoming an expert performance analyst. Rather, the objective is to help the reader construct simple models for analyzing and understanding the systems that they are interested in.Describing a complicated system abstractly with mathematical equations requires a careful choice of assumpti

  10. Modeling the variation trends of glacier systems

    Directory of Open Access Journals (Sweden)

    Z. Xie

    2013-01-01

    Full Text Available The basic principles and methods for a functional glacier systems model are introduced and applied for glaciers of Northwest China. When running the model we assume that a glacier system is under steady state conditions in the initial year. The median size of a glacier system is used as representative for the system. The curve of glacier area distribution against elevation is used to compute the increase in equilibrium line altitude (ELA, and the annual glacier ablation is calculated using a global formula a = 1.33(9.66 + ts².⁸⁵ [4, p. 96]. The net mass balance near the ELA under steady state conditions represents the net mass balance of the whole glacier system, and the time required for glacier runoff to return to the initial year level is calculated according to the law of glacier runoff variation, and used to calculate the variation of glacier area. The variation of glacier runoff is modeled according to ablation at the ELA, and the variation of glacier volume is modeled according to the absolute value of the mass balance. The observed changes in surveyed glaciers in China over recent decades were broadly consistent with predictions of the glacier system model. The model therefore offers a reliable method for the prediction of changes in glacier systems in response to changing climate.

  11. Photovoltaic System Modeling. Uncertainty and Sensitivity Analyses

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Clifford W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Martin, Curtis E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    We report an uncertainty and sensitivity analysis for modeling AC energy from ph otovoltaic systems . Output from a PV system is predicted by a sequence of models. We quantify u ncertainty i n the output of each model using empirical distribution s of each model's residuals. We propagate uncertainty through the sequence of models by sampli ng these distributions to obtain a n empirical distribution of a PV system's output. We consider models that: (1) translate measured global horizontal, direct and global diffuse irradiance to plane - of - array irradiance; (2) estimate effective irradiance; (3) predict cell temperature; (4) estimate DC voltage, current and power ; (5) reduce DC power for losses due to inefficient maximum power point tracking or mismatch among modules; and (6) convert DC to AC power . O ur analysis consider s a notional PV system com prising an array of FirstSolar FS - 387 modules and a 250 kW AC inverter ; we use measured irradiance and weather at Albuquerque, NM. We found the uncertainty in PV syste m output to be relatively small, on the order of 1% for daily energy. We found that unce rtainty in the models for POA irradiance and effective irradiance to be the dominant contributors to uncertainty in predicted daily energy. Our analysis indicates that efforts to reduce the uncertainty in PV system output predictions may yield the greatest improvements by focusing on the POA and effective irradiance models.

  12. Advanced Supermarket Refrigeration/ Heat Recovery Systems - Workshop Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Lundqvist, P.

    2001-06-15

    This CD ROM brings together proceedings of the Annex 26 Workshop 'Advanced Supermarket Refrigeration/ Heat Recovery Systems' held in Sweden, 2-3 October 2000. Sessions at the workshop were: Session 1: The supermarket as a system, Session 2: Analysis and modeling, Session 3: Field experiences, Session 4: Energy-efficient equipment. Annex 26 investigates candidate advanced system design approaches to determine their potential to reduce refrigerant usage and energy consumption for both refrigeration and heating/ air conditioning in supermarkets. Advanced supermarket refrigeration system concepts to be considered include, but are not limited to secondary loop systems, distributed compressors systems, and self-contained display cases.

  13. Climate Model Diagnostic Analyzer Web Service System

    Science.gov (United States)

    Lee, S.; Pan, L.; Zhai, C.; Tang, B.; Kubar, T. L.; Li, J.; Zhang, J.; Wang, W.

    2015-12-01

    Both the National Research Council Decadal Survey and the latest Intergovernmental Panel on Climate Change Assessment Report stressed the need for the comprehensive and innovative evaluation of climate models with the synergistic use of global satellite observations in order to improve our weather and climate simulation and prediction capabilities. The abundance of satellite observations for fundamental climate parameters and the availability of coordinated model outputs from CMIP5 for the same parameters offer a great opportunity to understand and diagnose model biases in climate models. In addition, the Obs4MIPs efforts have created several key global observational datasets that are readily usable for model evaluations. However, a model diagnostic evaluation process requires physics-based multi-variable comparisons that typically involve large-volume and heterogeneous datasets, making them both computationally- and data-intensive. In response, we have developed a novel methodology to diagnose model biases in contemporary climate models and implementing the methodology as a web-service based, cloud-enabled, provenance-supported climate-model evaluation system. The evaluation system is named Climate Model Diagnostic Analyzer (CMDA), which is the product of the research and technology development investments of several current and past NASA ROSES programs. The current technologies and infrastructure of CMDA are designed and selected to address several technical challenges that the Earth science modeling and model analysis community faces in evaluating and diagnosing climate models. In particular, we have three key technology components: (1) diagnostic analysis methodology; (2) web-service based, cloud-enabled technology; (3) provenance-supported technology. The diagnostic analysis methodology includes random forest feature importance ranking, conditional probability distribution function, conditional sampling, and time-lagged correlation map. We have implemented the

  14. CTBT integrated verification system evaluation model supplement

    Energy Technology Data Exchange (ETDEWEB)

    EDENBURN,MICHAEL W.; BUNTING,MARCUS; PAYNE JR.,ARTHUR C.; TROST,LAWRENCE C.

    2000-03-02

    Sandia National Laboratories has developed a computer based model called IVSEM (Integrated Verification System Evaluation Model) to estimate the performance of a nuclear detonation monitoring system. The IVSEM project was initiated in June 1994, by Sandia's Monitoring Systems and Technology Center and has been funded by the U.S. Department of Energy's Office of Nonproliferation and National Security (DOE/NN). IVSEM is a simple, ''top-level,'' modeling tool which estimates the performance of a Comprehensive Nuclear Test Ban Treaty (CTBT) monitoring system and can help explore the impact of various sensor system concepts and technology advancements on CTBT monitoring. One of IVSEM's unique features is that it integrates results from the various CTBT sensor technologies (seismic, in sound, radionuclide, and hydroacoustic) and allows the user to investigate synergy among the technologies. Specifically, IVSEM estimates the detection effectiveness (probability of detection), location accuracy, and identification capability of the integrated system and of each technology subsystem individually. The model attempts to accurately estimate the monitoring system's performance at medium interfaces (air-land, air-water) and for some evasive testing methods such as seismic decoupling. The original IVSEM report, CTBT Integrated Verification System Evaluation Model, SAND97-25 18, described version 1.2 of IVSEM. This report describes the changes made to IVSEM version 1.2 and the addition of identification capability estimates that have been incorporated into IVSEM version 2.0.

  15. CTBT integrated verification system evaluation model supplement

    Energy Technology Data Exchange (ETDEWEB)

    EDENBURN,MICHAEL W.; BUNTING,MARCUS; PAYNE JR.,ARTHUR C.; TROST,LAWRENCE C.

    2000-03-02

    Sandia National Laboratories has developed a computer based model called IVSEM (Integrated Verification System Evaluation Model) to estimate the performance of a nuclear detonation monitoring system. The IVSEM project was initiated in June 1994, by Sandia's Monitoring Systems and Technology Center and has been funded by the U.S. Department of Energy's Office of Nonproliferation and National Security (DOE/NN). IVSEM is a simple, ''top-level,'' modeling tool which estimates the performance of a Comprehensive Nuclear Test Ban Treaty (CTBT) monitoring system and can help explore the impact of various sensor system concepts and technology advancements on CTBT monitoring. One of IVSEM's unique features is that it integrates results from the various CTBT sensor technologies (seismic, in sound, radionuclide, and hydroacoustic) and allows the user to investigate synergy among the technologies. Specifically, IVSEM estimates the detection effectiveness (probability of detection), location accuracy, and identification capability of the integrated system and of each technology subsystem individually. The model attempts to accurately estimate the monitoring system's performance at medium interfaces (air-land, air-water) and for some evasive testing methods such as seismic decoupling. The original IVSEM report, CTBT Integrated Verification System Evaluation Model, SAND97-25 18, described version 1.2 of IVSEM. This report describes the changes made to IVSEM version 1.2 and the addition of identification capability estimates that have been incorporated into IVSEM version 2.0.

  16. Model Updating Nonlinear System Identification Toolbox Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ZONA Technology proposes to develop an enhanced model updating nonlinear system identification (MUNSID) methodology by adopting the flight data with state-of-the-art...

  17. Model and method for optimizing heterogeneous systems

    Science.gov (United States)

    Antamoshkin, O. A.; Antamoshkina, O. A.; Zelenkov, P. V.; Kovalev, I. V.

    2016-11-01

    Methodology of distributed computing performance boost by reduction of delays number is proposed. Concept of n-dimentional requirements triangle is introduced. Dynamic mathematical model of resource use in distributed computing systems is described.

  18. Modelling the evolution of human trail systems

    Science.gov (United States)

    Helbing, Dirk; Keltsch, Joachim; Molnár, Péter

    1997-07-01

    Many human social phenomena, such as cooperation, the growth of settlements, traffic dynamics and pedestrian movement, appear to be accessible to mathematical descriptions that invoke self-organization. Here we develop a model of pedestrian motion to explore the evolution of trails in urban green spaces such as parks. Our aim is to address such questions as what the topological structures of these trail systems are, and whether optimal path systems can be predicted for urban planning. We use an `active walker' model that takes into account pedestrian motion and orientation and the concomitant feedbacks with the surrounding environment. Such models have previously been applied to the study of complex structure formation in physical, chemical and biological systems. We find that our model is able to reproduce many of the observed large-scale spatial features of trail systems.

  19. Power system coherency and model reduction

    CERN Document Server

    Chow, Joe H

    2014-01-01

    This book provides a comprehensive treatment for understanding interarea modes in large power systems and obtaining reduced-order models using the coherency concept and selective modal analysis method.

  20. Propulsion System Models for Rotorcraft Conceptual Design

    Science.gov (United States)

    Johnson, Wayne

    2014-01-01

    The conceptual design code NDARC (NASA Design and Analysis of Rotorcraft) was initially implemented to model conventional rotorcraft propulsion systems, consisting of turboshaft engines burning jet fuel, connected to one or more rotors through a mechanical transmission. The NDARC propulsion system representation has been extended to cover additional propulsion concepts, including electric motors and generators, rotor reaction drive, turbojet and turbofan engines, fuel cells and solar cells, batteries, and fuel (energy) used without weight change. The paper describes these propulsion system components, the architecture of their implementation in NDARC, and the form of the models for performance and weight. Requirements are defined for improved performance and weight models of the new propulsion system components. With these new propulsion models, NDARC can be used to develop environmentally-friendly rotorcraft designs.

  1. Spinal Cord Injury Model System Information Network

    Science.gov (United States)

    ... Go New to Website Managing Bowel Function After Spinal Cord Injury Resilience, Depression and Bouncing Back after SCI Getting ... the UAB-SCIMS Contact the UAB-SCIMS UAB Spinal Cord Injury Model System Newly Injured Health Daily Living Consumer ...

  2. Systemic Therapy: A New Brief Intervention Model.

    Science.gov (United States)

    Searight, H. Russell; Openlander, Patrick

    1984-01-01

    Describes a newly developing mode of problem-oriented brief therapy. The systemic therapy model emphasizes the interactional context of clients' problems and represents an efficient intervention paradigm. (Author/JAC)

  3. Computational Models for Nonlinear Aeroelastic Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Clear Science Corp. and Duke University propose to develop and demonstrate a new and efficient computational method of modeling nonlinear aeroelastic systems. The...

  4. Forecasting Models in the State Education System

    Directory of Open Access Journals (Sweden)

    Gintautas DZEMYDA

    2003-04-01

    Full Text Available This paper presents model-based assessment and forecasting of the Lithuanian education system in the period of 2001-2010. In order to obtain satisfactory forecasting results, constructing of models used for these aims should be grounded on some interactive data mining. Data mining of data stored in the system of the Lithuanian teacher's database and of data from other sources representing the state of education system and the demographic changes in Lithuania was used. The models cover the estimation of data quality in the databases, the analysis of flow of teachers and pupils, the clustering of schools, the model of dynamics of pedagogical staff and pupils, and the quality analysis of teachers. The main results of forecasting and integrated analysis of the Lithuanian teachers' database with other data reflecting the state of the education system and demographic changes in Lithuania are presented.

  5. System Identification, Environmental Modelling, and Control System Design

    CERN Document Server

    Garnier, Hugues

    2012-01-01

    System Identification, Environmetric Modelling, and Control Systems Design is dedicated to Professor Peter Young on the occasion of his seventieth birthday. Professor Young has been a pioneer in systems and control, and over the past 45 years he has influenced many developments in this field. This volume is comprised of a collection of contributions by leading experts in system identification, time-series analysis, environmetric modelling and control system design – modern research in topics that reflect important areas of interest in Professor Young’s research career. Recent theoretical developments in and relevant applications of these areas are explored treating the various subjects broadly and in depth. The authoritative and up-to-date research presented here will be of interest to academic researcher in control and disciplines related to environmental research, particularly those to with water systems. The tutorial style in which many of the contributions are composed also makes the book suitable as ...

  6. Heuristic approaches to models and modeling in systems biology

    NARCIS (Netherlands)

    MacLeod, Miles

    2016-01-01

    Prediction and control sufficient for reliable medical and other interventions are prominent aims of modeling in systems biology. The short-term attainment of these goals has played a strong role in projecting the importance and value of the field. In this paper I identify the standard models must m

  7. Model of the Human Sleep Wake System

    CERN Document Server

    Rogers, Lisa

    2012-01-01

    A model and analysis of the human sleep/wake system is presented. The model is derived using the known neuronal groups, and their various projections, involved with sleep and wake. Inherent in the derivation is the existence of a slow time scale associated with homeostatic regulation, and a faster time scale associated with the dynamics within the sleep phase. A significant feature of the model is that it does not contain a periodic forcing term, common in other models, reflecting the fact that sleep/wake is not dependent upon a diurnal stimulus. Once derived, the model is analyzed using a linearized stability analysis. We then use experimental data from normal sleep-wake systems and orexin knockout systems to verify the physiological validity of the equations.

  8. Modelling of Signal - Level Crossing System

    Directory of Open Access Journals (Sweden)

    Daniel Novak

    2006-01-01

    Full Text Available The author presents an object-oriented model of a railway level-crossing system created for the purpose of functional requirements specification. Unified Modelling Language (UML, version 1.4, which enables specification, visualisation, construction and documentation of software system artefacts, was used. The main attention was paid to analysis and design phases. The former phase resulted in creation of use case diagrams and sequential diagrams, the latter in creation of class/object diagrams and statechart diagrams.

  9. A Prison/Parole System Simulation Model,

    Science.gov (United States)

    parole system on future prison and parole populations. A simulation model is presented, viewing a prison / parole system as a feedback process for...ciminal offenders . Transitions among the states in which an offender might be located, imprisoned, paroled , and discharged, are assumed to be in...accordance with a discrete time semi-Markov process. Projected prison and parole populations for sample data and applications of the model are discussed. (Author)

  10. Constructing a systems psychodynamic wellness model

    OpenAIRE

    Sanchen Henning; Frans Cilliers

    2012-01-01

    Orientation: The researchers constructed a Systems Psychodynamic Wellness Model (SPWM) by merging theory and concepts from systems psychodynamics and positive psychology. They then refined the model for application in organisations during a Listening Post (LP) that comprised experienced subject experts.Research purpose: The purpose of the research was to construct and refine the SPWM in order to understand psychological wellness at the individual, group and organisational levels.Motivation fo...

  11. New Directions in Modeling the Lighting Systems

    Directory of Open Access Journals (Sweden)

    P. Fiala

    2004-12-01

    Full Text Available This paper presents information about new directions in the modelingof lighting systems, and an overview of methods for the modeling oflighting systems. The new R-FEM method is described, which is acombination of the Radiosity method and the Finite Elements Method. Thepaper contains modeling results and their verification by experimentalmeasurements and by the Matlab simulation for this R-FEM method.

  12. Quantitative Models and Analysis for Reactive Systems

    DEFF Research Database (Denmark)

    Thrane, Claus

    phones and websites. Acknowledging that now more than ever, systems come in contact with the physical world, we need to revise the way we construct models and verification algorithms, to take into account the behavior of systems in the presence of approximate, or quantitative information, provided......, allowing verification procedures to quantify judgements, on how suitable a model is for a given specification — hence mitigating the usual harsh distinction between satisfactory and non-satisfactory system designs. This information, among other things, allows us to evaluate the robustness of our framework......, by studying how small changes to our models affect the verification results. A key source of motivation for this work can be found in The Embedded Systems Design Challenge [HS06] posed by Thomas A. Henzinger and Joseph Sifakis. It contains a call for advances in the state-of-the-art of systems verification...

  13. Hybrid Energy System Modeling in Modelica

    Energy Technology Data Exchange (ETDEWEB)

    William R. Binder; Christiaan J. J. Paredis; Humberto E. Garcia

    2014-03-01

    In this paper, a Hybrid Energy System (HES) configuration is modeled in Modelica. Hybrid Energy Systems (HES) have as their defining characteristic the use of one or more energy inputs, combined with the potential for multiple energy outputs. Compared to traditional energy systems, HES provide additional operational flexibility so that high variability in both energy production and consumption levels can be absorbed more effectively. This is particularly important when including renewable energy sources, whose output levels are inherently variable, determined by nature. The specific HES configuration modeled in this paper include two energy inputs: a nuclear plant, and a series of wind turbines. In addition, the system produces two energy outputs: electricity and synthetic fuel. The models are verified through simulations of the individual components, and the system as a whole. The simulations are performed for a range of component sizes, operating conditions, and control schemes.

  14. Model Reduction of Fuzzy Logic Systems

    Directory of Open Access Journals (Sweden)

    Zhandong Yu

    2014-01-01

    Full Text Available This paper deals with the problem of ℒ2-ℒ∞ model reduction for continuous-time nonlinear uncertain systems. The approach of the construction of a reduced-order model is presented for high-order nonlinear uncertain systems described by the T-S fuzzy systems, which not only approximates the original high-order system well with an ℒ2-ℒ∞ error performance level γ but also translates it into a linear lower-dimensional system. Then, the model approximation is converted into a convex optimization problem by using a linearization procedure. Finally, a numerical example is presented to show the effectiveness of the proposed method.

  15. Assimilating the along-track sea level anomaly into the regional ocean modeling system using the ensemble optimal interpolation

    Institute of Scientific and Technical Information of China (English)

    LYU Guokun; WANG Hui; ZHU Jiang; WANG Dakui; XIE Jiping; LIU Guimei

    2014-01-01

    The ensemble optimal interpolation (EnOI) is applied to the regional ocean modeling system (ROMS) with the ability to assimilate the along-track sea level anomaly (TSLA). This system is tested with an eddy-resolv-ing system of the South China Sea (SCS). Background errors are derived from a running seasonal ensemble to account for the seasonal variability within the SCS. A fifth-order localization function with a 250 km lo-calization radius is chosen to reduce the negative effects of sampling errors. The data assimilation system is tested from January 2004 to December 2006. The results show that the root mean square deviation (RMSD) of the sea level anomaly decreased from 10.57 to 6.70 cm, which represents a 36.6%reduction of error. The data assimilation reduces error for temperature within the upper 800 m and for salinity within the upper 200 m, although error degrades slightly at deeper depths. Surface currents are in better agreement with tra-jectories of surface drifters after data assimilation. The variance of sea level improves significantly in terms of both the amplitude and position of the strong and weak variance regions after assimilating TSLA. Results with AGE error (AGE) perform better than no AGE error (NoAGE) when considering the improvements of the temperature and the salinity. Furthermore, reasons for the extremely strong variability in the northern SCS in high resolution models are investigated. The results demonstrate that the strong variability of sea level in the high resolution model is caused by an extremely strong Kuroshio intrusion. Therefore, it is demonstrated that it is necessary to assimilate the TSLA in order to better simulate the SCS with high resolution models.

  16. Economic model of pipeline transportation systems

    Energy Technology Data Exchange (ETDEWEB)

    Banks, W. F.

    1977-07-29

    The objective of the work reported here was to develop a model which could be used to assess the economic effects of energy-conservative technological innovations upon the pipeline industry. The model is a dynamic simulator which accepts inputs of two classes: the physical description (design parameters, fluid properties, and financial structures) of the system to be studied, and the postulated market (throughput and price) projection. The model consists of time-independent submodels: the fluidics model which simulates the physical behavior of the system, and the financial model which operates upon the output of the fluidics model to calculate the economics outputs. Any of a number of existing fluidics models can be used in addition to that developed as a part of this study. The financial model, known as the Systems, Science and Software (S/sup 3/) Financial Projection Model, contains user options whereby pipeline-peculiar characteristics can be removed and/or modified, so that the model can be applied to virtually any kind of business enterprise. The several dozen outputs are of two classes: the energetics and the economics. The energetics outputs of primary interest are the energy intensity, also called unit energy consumption, and the total energy consumed. The primary economics outputs are the long-run average cost, profit, cash flow, and return on investment.

  17. A high-performance MUX-direct digital frequency synthesizer with quarter ROMs

    Institute of Scientific and Technical Information of China (English)

    Hao Zhikun; Zhang Qiang; Ni Weining; Shi Yin

    2012-01-01

    This paper presents a detailed description of a high-performance direct digital frequency synthesizer (DDFS) using optimized quarter ROMs.To improve the working frequency and spectral purity,an original quarter ROMs structure in 0.13 μm CMOS is brought forward and implemented.The working frequency is increased by 40% compared with Yuan Ling's method[1] of implementing a segmented DAC based DDFS.It has been implemented in 0.13 μm CMOS technology.The DDFS has a resolution of 10 bits with a measured SFDR 54 dBc.Its maximum operating frequency is 1.2 GHz by using six pipelining stages.Analytical investigation of improving spectral performances by using dual-slope approximation and pipeline is also presented.

  18. Adolescencia, relaciones románticas y actividad sexual: una revisión

    Directory of Open Access Journals (Sweden)

    Elvia Vargas

    2002-01-01

    Full Text Available Se presenta una revisión de algunas de las investigaciones más recientes sobre la adolescencia y los factores asociados a las relaciones románticas y la actividad sexual durante la adolescencia. Se parte de la premisa de que el análisis de la iniciación romántica y sexual durante la adolescencia requiere de modelos de causalidad múltiple que permitan dar cuenta, conjuntamente, de los factores que se encuentran en los contextos individual, familiar y social asociados con estos dos procesos. Se destaca el papel de los padres en el desarrollo de hijos adolescentes autónomos, capaces de manejar la influencia negativa del grupo de pares. Se hacen algunas recomendaciones a los responsables de diseñar programas de prevención y a los interesados en el estudio de la adolescencia y en el desarrollo de la disciplina

  19. Using CD-ROM technology to increase folic acid knowledge among physician assistant students.

    Science.gov (United States)

    Morgan, Christine; Klein, Diane Austrin; Selbst, Melissa

    2004-01-01

    The purpose of this study was to examine the effectiveness of incorporating CD-ROM technology to increase the knowledge of folic acid among physician assistant students. Participants included 76 first-year physician assistant students enrolled in a Women's Health course. A pretest and posttest was used to evaluate the knowledge gain after viewing the CD-ROM over a 2-week period. Of the 76 students in the course, 73 completed the pretest and the post-test. Posttest scores were significantly better than pretest scores (t = -11.83; p folic acid information in a clear and effective manner, (2) adequately covered the folic acid information, (3) increased student awareness and knowledge about folic acid, and (4) may promote early commitment by students to recommend daily folic acid intake to their patients.

  20. Relaciones románticas en el trabajo: una revisión

    Directory of Open Access Journals (Sweden)

    DAVID MARTÍNEZ-IÑIGO

    2000-01-01

    Full Text Available El artículo recoge los resultados de las investigaciones realizadas sobre las relaciones románticas en el trabajo. La revisión incluye aspectos como la definición de las relaciones citadas, los datos disponibles sobre su incidencia y las distintas tipologías y clasificaciones. Además se analizan los factores que promueven su formación y desarrollo, así como las consecuencias, individuales, grupales y organizacionales que se derivan de las relaciones románticas. Finalmente, se describen las estrategias y políticas para su manejo y se incluyen una serie de recomendaciones para futuros trabajos de investigación en este área.

  1. A forma do paradoxo: Friedrich Schlegel e a ironia romântica

    Directory of Open Access Journals (Sweden)

    Constantino Luz de Medeiros

    2014-04-01

    Full Text Available Definida como beleza lógica e forma do paradoxo, a ironia romântica de Friedrich Schlegel (1772-1829 assimila a antiga ironia socrática e a reinterpreta, inserindo-a como elemento central de sua teorização crítico-literária. O presente artigo analisa a ironia romântica, buscando situar sua alteração e abrangência no final do século XVIII, quando o conceito passa a significar metacrítica, reflexão filosófica, ruptura ficcional, distância estética e forma de exposição da arte literária.

  2. A multilingual programming model for coupled systems.

    Energy Technology Data Exchange (ETDEWEB)

    Ong, E. T.; Larson, J. W.; Norris, B.; Tobis, M.; Steder, M.; Jacob, R. L.; Mathematics and Computer Science; Univ. of Wisconsin; Univ. of Chicago; The Australian National Univ.

    2008-01-01

    Multiphysics and multiscale simulation systems share a common software requirement-infrastructure to implement data exchanges between their constituent parts-often called the coupling problem. On distributed-memory parallel platforms, the coupling problem is complicated by the need to describe, transfer, and transform distributed data, known as the parallel coupling problem. Parallel coupling is emerging as a new grand challenge in computational science as scientists attempt to build multiscale and multiphysics systems on parallel platforms. An additional coupling problem in these systems is language interoperability between their constituent codes. We have created a multilingual parallel coupling programming model based on a successful open-source parallel coupling library, the Model Coupling Toolkit (MCT). This programming model's capabilities reach beyond MCT's native Fortran implementation to include bindings for the C++ and Python programming languages. We describe the method used to generate the interlanguage bindings. This approach enables an object-based programming model for implementing parallel couplings in non-Fortran coupled systems and in systems with language heterogeneity. We describe the C++ and Python versions of the MCT programming model and provide short examples. We report preliminary performance results for the MCT interpolation benchmark. We describe a major Python application that uses the MCT Python bindings, a Python implementation of the control and coupling infrastructure for the community climate system model. We conclude with a discussion of the significance of this work to productivity computing in multidisciplinary computational science.

  3. The Guided System Development Framework: Modeling and Verifying Communication Systems

    DEFF Research Database (Denmark)

    Carvalho Quaresma, Jose Nuno; Probst, Christian W.; Nielson, Flemming

    2014-01-01

    In a world that increasingly relies on the Internet to function, application developers rely on the implementations of protocols to guarantee the security of data transferred. Whether a chosen protocol gives the required guarantees, and whether the implementation does the same, is usually unclear....... The Guided System Development framework contributes to more secure communication systems by aiding the development of such systems. The framework features a simple modelling language, step-wise refinement from models to implementation, interfaces to security verification tools, and code generation from...

  4. Total hip arthroplasty (S-ROM stem and subtrochanteric osteotomy for Crowe type IV developmental dysplasia of the hip

    Directory of Open Access Journals (Sweden)

    Liangtao Li

    2016-01-01

    Conclusions: In the primary THA for the treatment of irreducible DDH, subtrochanteric oblique osteotomy combined with the freely-rotatable S-ROM stem provided favorable short term outcomes by affording both morphological and functional advantages.

  5. Human performance modeling for system of systems analytics :soldier fatigue.

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Craig R.; Campbell, James E.; Miller, Dwight Peter

    2005-10-01

    The military has identified Human Performance Modeling (HPM) as a significant requirement and challenge of future systems modeling and analysis initiatives as can be seen in the Department of Defense's (DoD) Defense Modeling and Simulation Office's (DMSO) Master Plan (DoD 5000.59-P 1995). To this goal, the military is currently spending millions of dollars on programs devoted to HPM in various military contexts. Examples include the Human Performance Modeling Integration (HPMI) program within the Air Force Research Laboratory, which focuses on integrating HPMs with constructive models of systems (e.g. cockpit simulations) and the Navy's Human Performance Center (HPC) established in September 2003. Nearly all of these initiatives focus on the interface between humans and a single system. This is insufficient in the era of highly complex network centric SoS. This report presents research and development in the area of HPM in a system-of-systems (SoS). Specifically, this report addresses modeling soldier fatigue and the potential impacts soldier fatigue can have on SoS performance.

  6. On modeling and controlling intelligent systems

    Energy Technology Data Exchange (ETDEWEB)

    Dress, W.B.

    1993-11-01

    The aim of this paper is to show how certain diverse and advanced techniques of information processing and system theory might be integrated into a model of an intelligent, complex entity capable of materially enhancing an advanced information management system. To this end, we first examine the notion of intelligence and ask whether a semblance thereof can arise in a system consisting of ensembles of finite-state automata. Our goal is to find a functional model of intelligence in an information-management setting that can be used as a tool. The purpose of this tool is to allow us to create systems of increasing complexity and utility, eventually reaching the goal of an intelligent information management system that provides and anticipates needed data and information. We base our attempt on the ideas of general system theory where the four topics of system identification, modeling, optimization, and control provide the theoretical framework for constructing a complex system that will be capable of interacting with complex systems in the real world. These four key topics are discussed within the purview of cellular automata, neural networks, and evolutionary programming. This is a report of ongoing work, and not yet a success story of a synthetic intelligent system.

  7. On modeling and controlling intelligent systems

    Energy Technology Data Exchange (ETDEWEB)

    Dress, W.B.

    1993-11-01

    The aim of this paper is to show how certain diverse and advanced techniques of information processing and system theory might be integrated into a model of an intelligent, complex entity capable of materially enhancing an advanced information management system. To this end, we first examine the notion of intelligence and ask whether a semblance thereof can arise in a system consisting of ensembles of finite-state automata. Our goal is to find a functional model of intelligence in an information-management setting that can be used as a tool. The purpose of this tool is to allow us to create systems of increasing complexity and utility, eventually reaching the goal of an intelligent information management system that provides and anticipates needed data and information. We base our attempt on the ideas of general system theory where the four topics of system identification, modeling, optimization, and control provide the theoretical framework for constructing a complex system that will be capable of interacting with complex systems in the real world. These four key topics are discussed within the purview of cellular automata, neural networks, and evolutionary programming. This is a report of ongoing work, and not yet a success story of a synthetic intelligent system.

  8. Behavioral Reference Model for Pervasive Healthcare Systems.

    Science.gov (United States)

    Tahmasbi, Arezoo; Adabi, Sahar; Rezaee, Ali

    2016-12-01

    The emergence of mobile healthcare systems is an important outcome of application of pervasive computing concepts for medical care purposes. These systems provide the facilities and infrastructure required for automatic and ubiquitous sharing of medical information. Healthcare systems have a dynamic structure and configuration, therefore having an architecture is essential for future development of these systems. The need for increased response rate, problem limited storage, accelerated processing and etc. the tendency toward creating a new generation of healthcare system architecture highlight the need for further focus on cloud-based solutions for transfer data and data processing challenges. Integrity and reliability of healthcare systems are of critical importance, as even the slightest error may put the patients' lives in danger; therefore acquiring a behavioral model for these systems and developing the tools required to model their behaviors are of significant importance. The high-level designs may contain some flaws, therefor the system must be fully examined for different scenarios and conditions. This paper presents a software architecture for development of healthcare systems based on pervasive computing concepts, and then models the behavior of described system. A set of solutions are then proposed to improve the design's qualitative characteristics including, availability, interoperability and performance.

  9. XML Model of Planning System in Foundry

    Directory of Open Access Journals (Sweden)

    A. Stawowy

    2007-07-01

    Full Text Available Contemporary enterprises (including those manufacturing iron castings have at their disposal advanced computer resources for the management of production processes. The disadvantage of these solutions is an incoherent language for writing production planning and scheduling problems. The lack of the standard for data exchange and model description makes the work on designing, development and implementation difficult. Various dialects of XML language, among others for production planning purposes, which may change this situation have been developed for the last several years. The paper describes a PSLX language, which can be viewed first of all as an ontology and communication protocol inside and outside of the Advanced Planning and Scheduling (APS system, as well as an XML standard for production planning and scheduling. This language has been then used to develop a model of planning system in a foundry. The model consists of customer’s order model, resources model and scheduling model.

  10. Externalizing Behaviour for Analysing System Models

    DEFF Research Database (Denmark)

    Ivanova, Marieta Georgieva; Probst, Christian W.; Hansen, René Rydhof

    2013-01-01

    attackers. Therefore, many attacks are considerably easier to be performed for insiders than for outsiders. However, current models do not support explicit specification of different behaviours. Instead, behaviour is deeply embedded in the analyses supported by the models, meaning that it is a complex......, if not impossible task to change behaviours. Especially when considering social engineering or the human factor in general, the ability to use different kinds of behaviours is essential. In this work we present an approach to make the behaviour a separate component in system models, and explore how to integrate......System models have recently been introduced to model organisations and evaluate their vulnerability to threats and especially insider threats. Especially for the latter these models are very suitable, since insiders can be assumed to have more knowledge about the attacked organisation than outside...

  11. Reusing knowledge in embedded system modelling

    NARCIS (Netherlands)

    Marincic, J.; Mader, Angelika H.; Wieringa, Roelf J.; Lucas, Yan

    2013-01-01

    Model-based design is a promising technique to improve the quality of software and the efficiency of the software development process. We are investigating how to efficiently model embedded software and its environment to verify the requirements for the system controlled by the software. The softwar

  12. Complex Systems and Human Performance Modeling

    Science.gov (United States)

    2013-12-01

    constitute a cognitive architecture or decomposing the work flows and resource constraints that characterize human-system interactions, the modeler...also explored the generation of so-called “ fractal ” series from simple task network models where task times are the calculated by way of a moving

  13. Immune System Model Calibration by Genetic Algorithm

    NARCIS (Netherlands)

    Presbitero, A.; Krzhizhanovskaya, V.; Mancini, E.; Brands, R.; Sloot, P.

    2016-01-01

    We aim to develop a mathematical model of the human immune system for advanced individualized healthcare where medication plan is fine-tuned to fit a patient's conditions through monitored biochemical processes. One of the challenges is calibrating model parameters to satisfy existing experimental

  14. Test-driven modeling of embedded systems

    DEFF Research Database (Denmark)

    Munck, Allan; Madsen, Jan

    2015-01-01

    To benefit maximally from model-based systems engineering (MBSE) trustworthy high quality models are required. From the software disciplines it is known that test-driven development (TDD) can significantly increase the quality of the products. Using a test-driven approach with MBSE may have a sim...

  15. A system dynamics model for communications networks

    Science.gov (United States)

    Awcock, A. J.; King, T. E. G.

    1985-09-01

    An abstract model of a communications network in system dynamics terminology is developed as implementation of this model by a FORTRAN program package developed at RSRE is discussed. The result of this work is a high-level simulation package in which the performance of adaptive routing algorithms and other network controls may be assessed for a network of arbitrary topology.

  16. System level modelling with open source tools

    DEFF Research Database (Denmark)

    Jakobsen, Mikkel Koefoed; Madsen, Jan; Niaki, Seyed Hosein Attarzadeh;

    , called ForSyDe. ForSyDe is available under the open Source approach, which allows small and medium enterprises (SME) to get easy access to advanced modeling capabilities and tools. We give an introduction to the design methodology through the system level modeling of a simple industrial use case, and we...

  17. CD-ROM (Compact Disc Read Only Memory) Library of the Future

    Science.gov (United States)

    1988-06-01

    The external CD-ROM drive sells for $705 and the internal one for $610. 10. Danton Caccuum, Inc. has the DiscLine-500. It can reportedly metalise 500...and design criteria branch at WESTDIV was used primarily because of its proximity to the Naval Postgraduate School. Mr. George Rauch and Mr. Gary...Interview between Mr. Scott Day of Engineering Manage- ment Concepts, Inc., and authors, 18 February 1988. 25. Telephone conversation between George Thomas

  18. Metathesis Cascade Strategies (ROM-RCM-CM): A DOS approach to Skeletally Diverse Sultams

    OpenAIRE

    Jeon, Kyu Ok; Rayabarapu, Dinesh; Rolfe, Alan; Volp, Kelly; Omar, Iman; Hanson, Paul R.

    2009-01-01

    The development of a ring-opening metathesis/ring-closing metathesis/cross metathesis (ROM-RCM-CM) cascade strategy to the synthesis of a diverse collection of bi- and tricyclic sultams is reported. In this study, functionalized sultam scaffolds derived from intramolecular Diels-Alder (IMDA) reactions undergo metathesis cascades to yield a collection tricyclic sultams. Additional appendage based diversity was achieved by utilizing a variety of CM partners.

  19. O andarilho e o romântico: o mito do Judeu Errante em Castro Alves

    Directory of Open Access Journals (Sweden)

    Kenia Maria de Almeida Pereira

    2014-11-01

    Full Text Available O poema “Ahasverus e o gênio”, de Castro Alves dá relevo à lenda do Judeu Errante. Este artigo analisará esse poema e outros textos que apresentem temas judaicos. Levaremos também em consideração alguns estudos anteriores que retomam as questões românticas relacionadas ao poeta gênio e vate de um povo.

  20. Probabilistic modeling of solar power systems

    Science.gov (United States)

    Safie, Fayssal M.

    1989-01-01

    The author presents a probabilistic approach based on Markov chain theory to model stand-alone photovoltaic power systems and predict their long-term service performance. The major advantage of this approach is that it allows designers and developers of these systems to analyze the system performance as well as the battery subsystem performance in the long run and determine the system design requirements that meet a specified service performance level. The methodology presented is illustrated by using data for a radio repeater system for the Boston, Massachusetts, location.