WorldWideScience

Sample records for model results depicting

  1. Using the Stereotype Content Model to examine group depictions in Fascism: An Archival Approach.

    Science.gov (United States)

    Durante, Federica; Volpato, Chiara; Fiske, Susan T

    2010-04-01

    The Stereotype Content Model (SCM) suggests potentially universal intergroup depictions. If universal, they should apply across history in archival data. Bridging this gap, we examined social groups descriptions during Italy's Fascist era. In Study 1, articles published in a Fascist magazine- La Difesa della Razza -were content analyzed, and results submitted to correspondence analysis. Admiration prejudice depicted ingroups; envious and contemptuous prejudices depicted specific outgroups, generally in line with SCM predictions. No paternalistic prejudice appeared; historical reasons might explain this finding. Results also fit the recently developed BIAS Map of behavioral consequences. In Study 2, ninety-six undergraduates rated the content-analysis traits on warmth and competence, without knowing their origin. They corroborated SCM's interpretations of the archival data.

  2. [Evaluation of Vessel Depictability in Compressed Sensing MR Angiography Using Numerical Phantom Model].

    Science.gov (United States)

    Saito, Toshiki; Machida, Yoshio; Miyamoto, Kota; Ichinoseki, Yuki

    2015-11-01

    As an acceleration technique for use with magnetic resonance imaging (MRI), compressed sensing MRI (CSMRI) was introduced recently to obtain MR images from under sampled k-space data. Images generated using a nonlinear iterative procedure based on sophisticated theory in informatics using data sparsity have complicated characteristics. Therefore, the factors affecting image quality (IQ) in CS-MRI must be elucidated. This article specifically describes the examination of the IQ of clinically important MR angiography (MRA). For MRA, the depictability of thin blood vessels is extremely important, but quantitative evaluation of thin blood vessel depictability is difficult. Therefore, we conducted numerical experiments using a simple numerical phantom model mimicking the cerebral arteries so that the experimental conditions, including the thin vessel positions, can be given. Results show that vessel depictability changed depending on the noise intensity when the wavelet transform was used as the sparsifying transform. Decreased vessel depictability might present difficulties at the clinical signal-to-noise ratio (SNR) level. Therefore, selecting data acquisition and reconstruction conditions carefully in terms of the SNR is crucially important for CS-MRI study.

  3. Depicting reading ability as an information literacy model.

    Directory of Open Access Journals (Sweden)

    Aurora Cuevas Cerveró

    2008-02-01

    Full Text Available Readers’ world has been lately challenged by significant changes, such as the increase on reading supply, the diversification of documentary media and the new types of reading, writing and communicating through the Internet. Such situation specially affects 21st century schools, which are evolving too slowly and so being relegated from their corresponding pre-eminent place as reading teachers and knowledge transmitters. The main goal of this article is to contribute mitigating such adverse effects on schools by proposing an information literacy skills model aimed for improving reading competency from the school library, which is considered a key element capable of turning reading again into an indispensable instrument in knowledge construction.

  4. User testing of an adaptation of fishbone diagrams to depict results of systematic reviews

    Directory of Open Access Journals (Sweden)

    Gerald Gartlehner

    2017-12-01

    Full Text Available Abstract Background Summary of findings tables in systematic reviews are highly informative but require epidemiological training to be interpreted correctly. The usage of fishbone diagrams as graphical displays could offer researchers an effective approach to simplify content for readers with limited epidemiological training. In this paper we demonstrate how fishbone diagrams can be applied to systematic reviews and present the results of an initial user testing. Methods Findings from two systematic reviews were graphically depicted in the form of the fishbone diagram. To test the utility of fishbone diagrams compared with summary of findings tables, we developed and pilot-tested an online survey using Qualtrics. Respondents were randomized to the fishbone diagram or a summary of findings table presenting the same body of evidence. They answered questions in both open-ended and closed-answer formats; all responses were anonymous. Measures of interest focused on first and second impressions, the ability to find and interpret critical information, as well as user experience with both displays. We asked respondents about the perceived utility of fishbone diagrams compared to summary of findings tables. We analyzed quantitative data by conducting t-tests and comparing descriptive statistics. Results Based on real world systematic reviews, we provide two different fishbone diagrams to show how they might be used to display complex information in a clear and succinct manner. User testing on 77 students with basic epidemiological training revealed that participants preferred summary of findings tables over fishbone diagrams. Significantly more participants liked the summary of findings table than the fishbone diagram (71.8% vs. 44.8%; p < .01; significantly more participants found the fishbone diagram confusing (63.2% vs. 35.9%, p < .05 or indicated that it was difficult to find information (65.8% vs. 45%; p < .01. However, more than half

  5. Computed tomography depiction of small pediatric vessels with model-based iterative reconstruction

    International Nuclear Information System (INIS)

    Koc, Gonca; Courtier, Jesse L.; Phelps, Andrew; Marcovici, Peter A.; MacKenzie, John D.

    2014-01-01

    Computed tomography (CT) is extremely important in characterizing blood vessel anatomy and vascular lesions in children. Recent advances in CT reconstruction technology hold promise for improved image quality and also reductions in radiation dose. This report evaluates potential improvements in image quality for the depiction of small pediatric vessels with model-based iterative reconstruction (Veo trademark), a technique developed to improve image quality and reduce noise. To evaluate Veo trademark as an improved method when compared to adaptive statistical iterative reconstruction (ASIR trademark) for the depiction of small vessels on pediatric CT. Seventeen patients (mean age: 3.4 years, range: 2 days to 10.0 years; 6 girls, 11 boys) underwent contrast-enhanced CT examinations of the chest and abdomen in this HIPAA compliant and institutional review board approved study. Raw data were reconstructed into separate image datasets using Veo trademark and ASIR trademark algorithms (GE Medical Systems, Milwaukee, WI). Four blinded radiologists subjectively evaluated image quality. The pulmonary, hepatic, splenic and renal arteries were evaluated for the length and number of branches depicted. Datasets were compared with parametric and non-parametric statistical tests. Readers stated a preference for Veo trademark over ASIR trademark images when subjectively evaluating image quality criteria for vessel definition, image noise and resolution of small anatomical structures. The mean image noise in the aorta and fat was significantly less for Veo trademark vs. ASIR trademark reconstructed images. Quantitative measurements of mean vessel lengths and number of branches vessels delineated were significantly different for Veo trademark and ASIR trademark images. Veo trademark consistently showed more of the vessel anatomy: longer vessel length and more branching vessels. When compared to the more established adaptive statistical iterative reconstruction algorithm, model

  6. Using agent-based modeling to depict basin closure in the Naivasha basin, Kenya: a framework of analysis

    NARCIS (Netherlands)

    van Oel, P.R.; van der Veen, A.

    2011-01-01

    A spatially-explicit agent-based modeling (ABM) approach is applied for depicting the processes leading to basin closure in the Naivasha basin by representing interdependencies between water availability and water use. Modeling the dynamics of water use and water availability yields patterns of

  7. Model depiction of the atmospheric flows of radioactive cesium emitted from the Fukushima Daiichi Nuclear Power Station accident

    Science.gov (United States)

    Nakajima, Teruyuki; Misawa, Shota; Morino, Yu; Tsuruta, Haruo; Goto, Daisuke; Uchida, Junya; Takemura, Toshihiko; Ohara, Toshimasa; Oura, Yasuji; Ebihara, Mitsuru; Satoh, Masaki

    2017-12-01

    In this study, a new method is proposed for the depiction of the atmospheric transportation of the 137Cs emitted from the Fukushima Daiichi Nuclear Power Station accident. This method employs a combination of the results of two aerosol model ensembles and the hourly observed atmospheric 137Cs concentration at surface level during 14-23 March 2011 at 90 sites in the suspended particulate matter monitoring network. The new method elucidates accurate transport routes and the distribution of the surface-level atmospheric 137Cs relevant to eight plume events that were previously identified. The model ensemble simulates the main features of the observed distribution of surface-level atmospheric 137Cs. However, significant differences were found in some cases, and this suggests the need to improve the modeling of the emission scenario, plume height, wet deposition process, and plume propagation in the Abukuma Mountain region. The contributions of these error sources differ in the early and dissipating phases of each event, depending on the meteorological conditions.

  8. 3. Depiction and Intention

    OpenAIRE

    Blumson, Ben

    2016-01-01

    Whereas the analysis of meaning in terms of intention is orthodoxy in the philosophy of language, it is highly controversial in the philosophy of art. So even if it is agreed that inserting resemblance into the analysis of speaker meaning in terms of intention escapes counterexamples to the sufficiency of resemblance for depiction, it’s likely to be argued that defining depiction as a kind of intentional representation draws too close an analogy between depiction and description. Counterexamp...

  9. Wildlife Species, Potential habitat layer for Forest Interior Dwelling Species in the State of Maryland. These data are only the results of a model depicting where FIDS habitat might occur based on certain criteria. These polygons have NOT been field tested or field verifi, Published in 2006, 1:63360 (1in=1mile) scale, Maryland Department of Natural Resources (DNR).

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Wildlife Species dataset current as of 2006. Potential habitat layer for Forest Interior Dwelling Species in the State of Maryland. These data are only the results...

  10. Redox models in chemistry :  A depiction of the conceptions held by secondary school students of redox reactions

    OpenAIRE

    Österlund, Lise-Lotte

    2010-01-01

    According to previous research, students show difficulties in learning redox reactions. By the historical development different redox models exist to explain redox reactions, the oxygen model, the hydrogen model, the electron model and the oxidation number model. This thesis reports about three studies concerning conceptions held by secondary school students of redox reactions. A textbook analysis is also included in the thesis. The first study was an investigation of the students’ use of red...

  11. Complex structure of the lithospheric slab beneath the Banda arc, eastern Indonesia depicted by a seismic tomographic model

    Directory of Open Access Journals (Sweden)

    Sri Widiyantoro

    2011-10-01

    Full Text Available Seismic tomography with a non-linear approach has been successfully applied to image the P-wave velocity structure beneath the Banda arc in detail. Nearly one million compressional phases including the surfacereflected depth phases pP and pwP from events within the Indonesian region have been used. The depth phases have been incorporated in order to improve the sampling of the uppermantle structure, particularly below the Banda Sea in the back-arc regions. For the model parameterization, we have combined a highresolution regional inversion with a low-resolution global inversion to allow detailed images of slab structures within the study region and to minimize the mapping of distant aspherical mantle structure into the volume under study. In this paper, we focus our discussion on the upper mantle and transition zone structure beneath the curved Banda arc. The tomographic images confirm previous observations of the twisting of the slab in the upper mantle, forming a spoon-shaped structure beneath the Banda arc. A slab lying flat on the 660 km discontinuity beneath the Banda Sea is also well imaged. Further interpretations of the resulting tomograms and seismicity data support the scenario of the Banda arc subduction rollback.

  12. Methods for Creating and Animating a Computer Model Depicting the Structure and Function of the Sarcoplasmic Reticulum Calcium ATPase Enzyme.

    Science.gov (United States)

    Chen, Alice Y.; McKee, Nancy

    1999-01-01

    Describes the developmental process used to visualize the calcium ATPase enzyme of the sarcoplasmic reticulum which involves evaluating scientific information, consulting scientists, model making, storyboarding, and creating and editing in a computer medium. (Author/CCM)

  13. Atmospheric Deposition Modeling Results

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset provides data on model results for dry and total deposition of sulfur, nitrogen and base cation species. Components include deposition velocities, dry...

  14. Eastern Han's Cunning Depiction

    Science.gov (United States)

    Chiu, B. C.

    1998-09-01

    It is still only speculation, but an earlier visit to a Han dynasty (202 BC - 220 AD) tomb has started the idea, and a recently found study of another Han tomb has convinced me it is worth pursuing. What it is is that the ancient Chinese Sky Animal which represents North was not the turtle or tortoise until about the time of Han. My own visit was to an Eastern (later period) Han tomb which had been moved to a museum near the ancient capital of Luoyang. The ceiling of the inner chamber was rounded, made of brick. Drawings of a tiger and a red bird were clear to the west and south. A rounded object was at the north. Outside the tomb was a sign which said it was 'cun,' which means village. Chinese characters often have homonyms, but 'cun' has few. I have also visited the neolithic village of Banpo, near the Yellow River in the north. It has noticeably large and deep trenches to keep out wild animals, and one separates the residential area from the business area. This village is dated earlier than 4000 BC. The trenches definitely remind me of later depictions of the turtle with a snake wound about it. The recent findings of a tomb at Puyang with shapes of tiger and dragon have dated it to 3000 BC. Nothing was placed at the south side. Something was at the north, but one might argue about that. Finally, I found this article in Chinese Studies in Archaeology (1979), translated by S. Cahill of UC, Berkeley, called "Analysis of the Western Han Murals in the Luouyang Tomb of Bo Qianqiu" by Sun Zuoyun. Although Western Han is earlier than Eastern, the pictures in the tomb were well preserved. There were tiger, dragon, vermilion bird, and other animals, but no tortoise. Instead, there was a sun with a bird inside, and the moon with a frog. Several hundred miles north of the Yellow River, there is the Amur River. The natives there had robes decorated with snakes, lizards, and frogs, and other animals, but no turtle. Later reasons for having the turtle or tortoise is a separate

  15. Depicted serving size: cereal packaging pictures exaggerate serving sizes and promote overserving

    Directory of Open Access Journals (Sweden)

    Aner Tal

    2017-02-01

    Full Text Available Abstract Background Extensive work has focused on the effects of nutrition label information on consumer behavior on the one hand, and on the effects of packaging graphics on the other hand. However, little work has examined how serving suggestion depictions - graphics relating to serving size - influence the quantity consumers serve themselves. The current work examines the prevalence of exaggerated serving size depictions on product packaging (study 1 and its effects on food serving in the context of cereal (study 2. Methods Study 1 was an observational field survey of cereal packaging. Study 2 was a mixed experimental cross-sectional design conducted at a U.S. university, with 51 student participants. Study 1 coded 158 US breakfast cereals and compared the serving sizes depicted on the front of the box with the suggested serving size stated on the nutrition facts panel. Study 2 measured the amount of cereal poured from exaggerated or accurate serving size depictions. Study 1 compared average servings via t-tests. Study 2 used a mixed model with cereal type as the repeated measure and a compound symmetry covariance matrix. Results Study 1 demonstrated that portion size depictions on the front of 158 cereal boxes were 64.7% larger (221 vs. 134 calories than the recommended portions on nutrition facts panels of those cereals. Study 2 showed that boxes that depicted exaggerated serving sizes led people to pour 17.8% more cereal compared to pouring from modified boxes that depicted a single-size portion of cereal matching suggested serving size. This was 42% over the suggested serving size. Conclusions Biases in depicted serving size depicted on cereal packaging are prevalent in the marketplace. Such biases may lead to overserving, which may consequently lead to overeating. Companies should depict the recommended serving sizes, or otherwise indicate that the depicted portion represents an exaggerated serving size.

  16. An animated depiction of major depression epidemiology

    Directory of Open Access Journals (Sweden)

    Patten Scott B

    2007-06-01

    Full Text Available Abstract Background Epidemiologic estimates are now available for a variety of parameters related to major depression epidemiology (incidence, prevalence, etc.. These estimates are potentially useful for policy and planning purposes, but it is first necessary that they be synthesized into a coherent picture of the epidemiology of the condition. Several attempts to do so have been made using mathematical modeling procedures. However, this information is not easy to communicate to users of epidemiological data (clinicians, administrators, policy makers. Methods In this study, up-to-date data on major depression epidemiology were integrated using a discrete event simulation model. The mathematical model was animated in Virtual Reality Modeling Language (VRML to create a visual, rather than mathematical, depiction of the epidemiology. Results Consistent with existing literature, the model highlights potential advantages of population health strategies that emphasize access to effective long-term treatment. The paper contains a web-link to the animation. Conclusion Visual animation of epidemiological results may be an effective knowledge translation tool. In clinical practice, such animations could potentially assist with patient education and enhanced long-term compliance.

  17. A Study of Birnbaum's Theory of the Relationship between the Constructs of Leadership and Organization as Depicted in His Higher Education Models of Organizational Functioning: A Contextual Leadership Paradigm for Higher Education

    Science.gov (United States)

    Douglas, Pamela A.

    2013-01-01

    This quantitative, nonexperimental study used survey research design and nonparametric statistics to investigate Birnbaum's (1988) theory that there is a relationship between the constructs of leadership and organization, as depicted in his five higher education models of organizational functioning: bureaucratic, collegial, political,…

  18. Promise(s of mesenchymal stem cells as an in vitro model system to depict pre-diabetic/diabetic milieu in WNIN/GR-Ob mutant rats.

    Directory of Open Access Journals (Sweden)

    Soundarya L Madhira

    Full Text Available BACKGROUND: Development of model systems have helped to a large extent, in bridging gap to understand the mechanism(s of disease including diabetes. Interestingly, WNIN/GR-Ob rats (Mutants, established at National Centre for Laboratory Animals (NCLAS of National Institute of Nutrition (NIN, form a suitable model system to study obesity with Type 2 diabetes (T2D demonstrating several secondary complications (cataract, cardiovascular complications, infertility, nephropathy etc. The present study has been carried out to explore the potent application(s of multipotent stem cells such as bone marrow mesenchymal stem cells (BM-MSCs, to portray features of pre-diabetic/T2D vis-à-vis featuring obesity, with impaired glucose tolerance (IGT, hyperinsulinemia (HI and insulin resistance (IR seen with Mutant rats akin to human situation. METHODOLOGY/PRINCIPAL FINDINGS: Primary cultures of BM-MSCs (third passage from Mutants, its lean littermate (Lean and parental control (Control were characterized for: proliferation markers, disease memory to mark obesity/T2D/HI/IR which included phased gene expression studies for adipogenic/pancreatic lineages, inflammatory markers and differentiation ability to form mature adipocytes/Insulin-like cellular aggregates (ILCAs. The data showed that BM-MSCs from Mutant demonstrated a state of disease memory, depicted by an upregulated expression of inflammatory markers (IL-6, TNFα; increased stem cell recruitment (Oct-4, Sox-2 and proliferation rates (CD90+/CD29+, PDA, 'S' phase of cell cycle by FACS and BrdU incorporation; accelerated preadipocyte induction (Dact-1, PPARγ2 with a quantitative increase in mature adipocyte formation (Leptin; ILCAs, which were non-responsive to high glucose did confer the Obese/T2D memory in Mutants. Further, these observations were in compliance with the anthropometric data. CONCLUSIONS: Given the ease of accessibility and availability of MSCs, the present study form the basis to report for

  19. The Perception of Depicted Motion

    Directory of Open Access Journals (Sweden)

    Livio Dobrez

    2013-12-01

    Full Text Available Everyone knows that you can read a galloping horse in a still image as galloping. This paper asks how it is that we perceive motion in pictures. It considers perception of real motion in point-light experiments and the perception of motion in stills via the work of various psychologists, in the course of which it raises theoretical questions about the nature of visual perception. It then offers a detailed examination of knowledge regarding neural substrates for both real and depicted motion perception. Finally, it combines psychological and neurophysiological perspectives with phenomenologically-oriented observation of pictures, discussing both frontoparallel motion and motion in depth (in particular the phenomenon of “looming” in terms of two kinds of depictions, the “narrative” and the “performative”. Examples are drawn from all kinds of pictures, but focus is on world rock art, whose time depth is especially amenable to the universalist approach adopted by the paper.

  20. Distribution of Nitrosomonas europaea and Nitrobacter winogradskyi in an autotrophic nitrifying biofilm reactor as depicted by molecular analyses and mathematical modelling.

    Science.gov (United States)

    Montràs, Anna; Pycke, Benny; Boon, Nico; Gòdia, Francesc; Mergeay, Max; Hendrickx, Larissa; Pérez, Julio

    2008-03-01

    The autotrophic two-species biofilm from the packed bed reactor of a life-support system, containing Nitrosomonas europaea ATCC 19718 and Nitrobacter winogradskyi ATCC 25391, was analysed after 4.8 years of continuous operation performing complete nitrification. Real-time quantitative polymerase chain reaction (Q-PCR) was used to quantify N. europaea and N. winogradskyi along the vertical axis of the reactor, revealing a spatial segregation of N. europaea and N. winogradskyi. The main parameters influencing the spatial segregation of both nitrifiers along the bed were assessed through a multi-species one-dimensional biofilm model generated with AQUASIM software. The factor that contributed the most to this distribution profile was a small deviation from the flow pattern of a perfectly mixed tank towards plug-flow. The results indicate that the model can estimate the impact of specific biofilm parameters and predict the nitrification efficiency and population dynamics of a multispecies biofilm.

  1. Reader responses to literary depictions of rape

    NARCIS (Netherlands)

    E.M. Koopman (Emy); M. Hilscher (Michelle); G.C. Cupchik (Gerald)

    2012-01-01

    textabstractThis study explored reader responses to different literary depictions of rape. Four literary excerpts were used and divided as aesthetic versus nonaesthetic (style) and allusive versus explicit (detail). The general question was how readers would react to literary fragments depicting

  2. How well do environmental archives of atmospheric mercury deposition in the Arctic reproduce rates and trends depicted by atmospheric models and measurements?

    Science.gov (United States)

    Goodsite, M E; Outridge, P M; Christensen, J H; Dastoor, A; Muir, D; Travnikov, O; Wilson, S

    2013-05-01

    This review compares the reconstruction of atmospheric Hg deposition rates and historical trends over recent decades in the Arctic, inferred from Hg profiles in natural archives such as lake and marine sediments, peat bogs and glacial firn (permanent snowpack), against those predicted by three state-of-the-art atmospheric models based on global Hg emission inventories from 1990 onwards. Model veracity was first tested against atmospheric Hg measurements. Most of the natural archive and atmospheric data came from the Canadian-Greenland sectors of the Arctic, whereas spatial coverage was poor in other regions. In general, for the Canadian-Greenland Arctic, models provided good agreement with atmospheric gaseous elemental Hg (GEM) concentrations and trends measured instrumentally. However, there are few instrumented deposition data with which to test the model estimates of Hg deposition, and these data suggest models over-estimated deposition fluxes under Arctic conditions. Reconstructed GEM data from glacial firn on Greenland Summit showed the best agreement with the known decline in global Hg emissions after about 1980, and were corroborated by archived aerosol filter data from Resolute, Nunavut. The relatively stable or slowly declining firn and model GEM trends after 1990 were also corroborated by real-time instrument measurements at Alert, Nunavut, after 1995. However, Hg fluxes and trends in northern Canadian lake sediments and a southern Greenland peat bog did not exhibit good agreement with model predictions of atmospheric deposition since 1990, the Greenland firn GEM record, direct GEM measurements, or trends in global emissions since 1980. Various explanations are proposed to account for these discrepancies between atmosphere and archives, including problems with the accuracy of archive chronologies, climate-driven changes in Hg transfer rates from air to catchments, waters and subsequently into sediments, and post-depositional diagenesis in peat bogs

  3. Sectional depiction of the pelvic floor by CT, MR imaging and sheet plastination: computer-aided correlation and 3D model

    Energy Technology Data Exchange (ETDEWEB)

    Beyersdorff, D.; Taupitz, M.; Hamm, B. [Dept. of Radiology, Humboldt Univ., Berlin (Germany); Schiemann, T. [Inst. for Mathematics and Computer Science in Medicine, University of Hamburg (Germany); Kooijman, H. [Philips Medical Systems, Hamburg (Germany); Nicolas, V. [Dept. of Radiology and Nuclear Medicine, BG Kliniken Bergmannsheil, Bochum (Germany)

    2001-04-01

    The structures of the pelvic floor are clinically important but difficult to assess. To facilitate the understanding of the complicated pelvic floor anatomy on sectional images obtained by CT and MR imaging, and to make the representation more vivid, a computer-aided 3D model was created from a male and a female torso to develop a teaching tool. A male and a female cadaver torso were investigated by means of CT, MR imaging, and serial-section sheet plastination. A 3D reconstruction of the pelvic floor and adjacent structures was performed by fusion of CT and MR imaging data sets with sheet plastination sections. Corresponding sections from all three methods could be compared and visualized in their 3D context. Sheet plastination allows distinction of connective tissue, muscles, and pelvic organs down to a microscopic level. In combination with CT, MR imaging, and sheet plastination a 3D model of the pelvic floor offers a better understanding of the complex pelvic anatomy. This knowledge may be applied in the diagnostic imaging of urinary incontinence or prolapse and prior to prostate surgery. (orig.)

  4. VEMAP 1: Selected Model Results

    Data.gov (United States)

    National Aeronautics and Space Administration — The Vegetation/Ecosystem Modeling and Analysis Project (VEMAP) was a multi-institutional, international effort addressing the response of biogeography and...

  5. VEMAP 1: Selected Model Results

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: The Vegetation/Ecosystem Modeling and Analysis Project (VEMAP) was a multi-institutional, international effort addressing the response of biogeography and...

  6. Women's Depiction by the Mass Media.

    Science.gov (United States)

    Tuchman, Gaye

    1979-01-01

    The distorted representation of women and other minority groups in the media is the subject of this essay. It is argued that underrepresentation of women, including their stereotypic portrayals, reflect a woman's real lack of power in society. Suggestions are made for improving the media's depiction of women. (EB)

  7. Os sustentaculi: depiction on MR images

    International Nuclear Information System (INIS)

    Bencardino, J.; Rosenberg, Z.S.; Beltran, J.; Sheskier, S.

    1997-01-01

    We describe a 14-year old patient with pain in the medial ankle. The MR study depicted a rare accessory ossicle called the os sustentaculi. This accessory bone should not be confused with a fracture of the sustentaculum tali of the calcaneus. (orig.). With 1 fig

  8. Os sustentaculi: depiction on MR images

    Energy Technology Data Exchange (ETDEWEB)

    Bencardino, J. [Department of Radiology, Hospital for Joint Diseases, Orthopaedic Institute, 305 E. 17th. Street, New York, NY 10003 (United States); Rosenberg, Z.S. [Department of Radiology, Hospital for Joint Diseases, Orthopaedic Institute, 305 E. 17th. Street, New York, NY 10003 (United States); Beltran, J. [Department of Radiology, Hospital for Joint Diseases, Orthopaedic Institute, 305 E. 17th. Street, New York, NY 10003 (United States); Sheskier, S. [Department of Orthopaedics, St. Vincent Hospital, New York, NY (United States)

    1997-08-01

    We describe a 14-year old patient with pain in the medial ankle. The MR study depicted a rare accessory ossicle called the os sustentaculi. This accessory bone should not be confused with a fracture of the sustentaculum tali of the calcaneus. (orig.). With 1 fig.

  9. Identifying Depiction in American Sign Language Presentations

    Science.gov (United States)

    Thumann, Mary Agnes

    2010-01-01

    This dissertation examines depiction in American Sign Language (ASL) presentations. The impetus for this study came from my work as an instructor in an interpreter education program. The majority of ASL/English interpreters are second language learners of ASL, and many of them find some features of ASL challenging to learn. These features are…

  10. Production and Comprehension of Pantomimes Used to Depict Objects

    Directory of Open Access Journals (Sweden)

    Karin van Nispen

    2017-07-01

    Full Text Available Pantomime, gesture in absence of speech, has no conventional meaning. Nevertheless, individuals seem to be able to produce pantomimes and derive meaning from pantomimes. A number of studies has addressed the use of co-speech gesture, but little is known on pantomime. Therefore, the question of how people construct and understand pantomimes arises in gesture research. To determine how people use pantomimes, we asked participants to depict a set of objects using pantomimes only. We annotated what representation techniques people produced. Furthermore, using judgment tasks, we assessed the pantomimes' comprehensibility. Analyses showed that similar techniques were used to depict objects across individuals. Objects with a default depiction method were better comprehended than objects for which there was no such default. More specifically, tools and objects depicted using a handling technique were better understood. The open-answer experiment showed low interpretation accuracy. Conversely, the forced-choice experiment showed ceiling effects. These results suggest that across individuals, similar strategies are deployed to produce pantomime, with the handling technique as the apparent preference. This might indicate that the production of pantomimes is based on mental representations which are intrinsically similar. Furthermore, pantomime conveys semantically rich, but ambiguous, information, and its interpretation is much dependent on context. This pantomime database is available online: https://dataverse.nl/dataset.xhtml?persistentId=hdl:10411/QZHO6M. This can be used as a baseline with which we can compare clinical groups.

  11. Reach Out and Eat: Food and Beverages Depicted in Books for Preschoolers

    Science.gov (United States)

    England, Jessica L.; Linchey, Jennifer; Madsen, Kristine A.; Patel, Anisha I.

    2015-01-01

    Objective To examine food and beverage depictions in books for preschoolers. Methods Books for preschoolers from Reach Out and Read (ROR; n = 42), public library (n = 27), and Publisher's Weekly booklists (n = 31) were examined for nutritive and empty-calorie food and beverage depictions. Results It was found that 66% of books depicted at least I food or beverage. More books depicted nutritive items than empty-calorie items (87.5% vs 54.7%, P branding. With regard to messaging, approximately a third of books with the most empty-calorie depictions promoted unhealthy foods. Conclusions When selecting books for ROR, it may be important to consider food and beverage depictions and messages. PMID:25715825

  12. THE DEPICTION OF HOMOSEXUALITY IN AMERICAN MOVIES

    Directory of Open Access Journals (Sweden)

    Rudy Rudy

    2016-06-01

    Full Text Available This study focuses on the depiction of homosexuality in American films. It is intended to identify the images of gays depicted in American films as well as the characteristics of American gay movies. It incorporates library research by applying an analytical descriptive approach in analyzing the data. The symbol and reflective theory is used to analyze 18 American movies and 14 gay films from other countries in the early 2000s. It shows that gay films can attract audiences by describing gays as the objects for laughs; gays revealing their sexual identities; sexual scenes of gays; masculine gay men; and violence in gay life. They appear in genres like drama, comedy, romance, detective, western, and horror/mystery with two images of gay people shown in American gay movies; they are the portrait of gays as a minority and the pessimism. However, it also shows that some American gay films picture good gay life, happy gay couples, gay marriage, etc.

  13. Depicted serving size: cereal packaging pictures exaggerate serving sizes and promote overserving.

    Science.gov (United States)

    Tal, Aner; Niemann, Stina; Wansink, Brian

    2017-02-06

    Extensive work has focused on the effects of nutrition label information on consumer behavior on the one hand, and on the effects of packaging graphics on the other hand. However, little work has examined how serving suggestion depictions - graphics relating to serving size - influence the quantity consumers serve themselves. The current work examines the prevalence of exaggerated serving size depictions on product packaging (study 1) and its effects on food serving in the context of cereal (study 2). Study 1 was an observational field survey of cereal packaging. Study 2 was a mixed experimental cross-sectional design conducted at a U.S. university, with 51 student participants. Study 1 coded 158 US breakfast cereals and compared the serving sizes depicted on the front of the box with the suggested serving size stated on the nutrition facts panel. Study 2 measured the amount of cereal poured from exaggerated or accurate serving size depictions. Study 1 compared average servings via t-tests. Study 2 used a mixed model with cereal type as the repeated measure and a compound symmetry covariance matrix. Study 1 demonstrated that portion size depictions on the front of 158 cereal boxes were 65.84% larger (221 vs. 134 calories) than the recommended portions on nutrition facts panels of those cereals. Study 2 showed that boxes that depicted exaggerated serving sizes led people to pour 20% more cereal compared to pouring from modified boxes that depicted a single-size portion of cereal matching suggested serving size. This was 45% over the suggested serving size. Biases in depicted serving size depicted on cereal packaging are prevalent in the marketplace. Such biases may lead to overserving, which may consequently lead to overeating. Companies should depict the recommended serving sizes, or otherwise indicate that the depicted portion represents an exaggerated serving size.

  14. Depiction of global trends in publications on mobile health

    Directory of Open Access Journals (Sweden)

    Shahla Foozonkhah

    2017-07-01

    Full Text Available Background: Variety of mobile health initiatives in different levels have been undertaken across many countries. Trends of these initiatives can be reflected in the research published in m-health domain. Aim: This paper aims to depict global trends in the published works on m-health topic. Materials and Methods: The Web of Science database was used to identify all relevant published papers on mobile health domain worldwide. The search was conducted on documents published from January 1898 to December 2014. The criteria for searching were set to be “mHealth” or “Mobile health” or “m health” or “m_health” or “m-health” in topics. Results: Findings revealed an increasing trend of citations and publications on m-health research since 2012. English was the first most predominant language of the publication. The US had the highest number of publication with 649 papers; however, the Netherlands ranked first after considering publication number in terms of countries population. “Studies in Health Technology and Informatics” was the source title with highest number of publications on mobile health topics. Conclusion: Trend of research observed in this study indicates the continuing growth is happening in mobile health domain. This may imply that the new model of health-care delivery is emerging. Further research is needed to specify directions of mobile health research. It is necessary to identify and prioritize the research gaps in this domain.

  15. Depicting educational content repurposing context and inheritance.

    Science.gov (United States)

    Kaldoudi, Eleni; Dovrolis, Nikolas; Konstantinidis, Stathis Th; Bamidis, Panagiotis D

    2011-01-01

    Educational content is often shared among different educators and is enriched, adapted, and, in general, repurposed so that it can be reused in different contexts. This paper discusses educational content and content repurposing in medical education, presenting different repurposing contexts. Finally, it proposes a novel approach to content repurposing via Web 2.0 social networking of learning resources. The proposed social network is augmented by a graphical representation module in order to capture and depict the relationships among different repurposed medical educational resources, based on educational resource "families" and inheritance. The ultimate goal is to provide a conceptually different approach to educational resource organization and retrieval via "social" associations among learning resources.

  16. Do artists use linear perspective to depict visual space?

    Science.gov (United States)

    Pepperell, Robert; Haertel, Manuela

    2014-01-01

    The question of how to accurately depict visual space has fascinated artists, architects, scientists, and philosophers for hundreds of years. Many have argued that linear perspective, which is based on well-understood laws of optics and geometry, is the correct way to record visual space. Others have argued that linear perspective projections fail to account for important features of visual experience, and have proposed various curvilinear, subjective, and hyperbolic forms of perspective instead. In this study we compare three sets of artistic depictions of real-world scenes with linear perspective versions (photographs) of the same scenes. They include a series of paintings made by one of the authors, a selection of landscape paintings by Paul Cézanne, and a set of drawings made as part of a controlled experiment by people with art training. When comparing the artworks with the photographs depicting the same visual space, we found consistent differences. In the artworks the part of the scene corresponding to the central visual field was enlarged compared with the photograph, and the part corresponding to the peripheral field was compressed. We consider a number of factors that could explain these results.

  17. Healthy depictions? Depicting adoption and adoption news events on broadcast news.

    Science.gov (United States)

    Kline, Susan L; Chatterjee, Karishma; Karel, Amanda I

    2009-01-01

    Given that the public uses the media to learn about adoption as a family form, this study analyzes U.S. television news coverage of adoption between 2001 and 2005 (N = 309 stories), to identify the types of news events covered about adoption. A majority of news stories covered fraud, crime, legal disputes, and negative international adoption cases. Adoptees as defective or unhealthy were depicted more in negative news event stories, birth parents appeared less overall, and adoptive parents were most likely to have healthy depictions in positively oriented adoption experience, big family, and reunion stories. Although three quarters of the stories used primary adoption participants as news sources, one-third of the negative event stories did not contain healthy depictions of adoption participants. The authors discuss ways journalists and researchers might improve adoption news coverage.

  18. Empathy-Related Responses to Depicted People in Art Works

    Science.gov (United States)

    Kesner, Ladislav; Horáček, Jiří

    2017-01-01

    Existing theories of empathic response to visual art works postulate the primacy of automatic embodied reaction to images based on mirror neuron mechanisms. Arguing for a more inclusive concept of empathy-related response and integrating four distinct bodies of literature, we discuss contextual, and personal factors which modulate empathic response to depicted people. We then present an integrative model of empathy-related responses to depicted people in art works. The model assumes that a response to empathy-eliciting figural artworks engages the dynamic interaction of two mutually interlinked sets of processes: socio-affective/cognitive processing, related to the person perception, and esthetic processing, primarily concerned with esthetic appreciation and judgment and attention to non-social aspects of the image. The model predicts that the specific pattern of interaction between empathy-related and esthetic processing is co-determined by several sets of factors: (i) the viewer's individual characteristics, (ii) the context variables (which include various modes of priming by narratives and other images), (iii) multidimensional features of the image, and (iv) aspects of a viewer's response. Finally we propose that the model is implemented by the interaction of functionally connected brain networks involved in socio-cognitive and esthetic processing. PMID:28286487

  19. Science versus the Humanities: Hyman on Wollhein on Depiction

    OpenAIRE

    Kemp, Gary

    2016-01-01

    I criticize John Hyman’s criticism of Richard Wollheim’s account of depiction or pictorial representation. The underlying issue appears to be fundamental: do we go with Hyman’s account of the essence of depiction as straightforwardly geometrical, or do we agree with Wollheim that depiction must be understood as proceeding through the human mind?

  20. Depicting CH4 fluxes and drivers dynamics

    Science.gov (United States)

    Dengel, S.; Billesbach, D. P.; Hughes, H.; Humphreys, E.; Lee, J.; Noormets, A.; Verfaillie, J. G.

    2016-12-01

    Since the advancement in CH4 eddy covariance flux measurements, monitoring of CH4 emissions is becoming more widespread. Since CH4 fluxes are not as predictable or as easily interpretable as CO2 fluxes, understanding their emission patterns often still challenging. As these are spatially (ecosystem and latitudinal) and temporal very divers and often event based, a better understanding or interpretation of results is required. An improvement in understanding does also increase the reliability of gap-filling methods as annual greenhouse gas budgets rely on high quality data. There are generalised additive models (Wood 2001) that can easily be applied to sites, models where a relationship between the response variable, in this case CH4 and explanatory variables (drivers) is established. Relevant for CH4flux dynamics are the smoothing function that is applied, where each predictor variable is separated into sections and a polynomial function fitted. On the one hand such models are rarely used as they are difficult to interpret since no parameter values are retuned. On the other hand, such models are very good for prediction and explanatory analysis in estimating the functional nature of a response. Applying such models to CH4 eddy flux data does improve our understanding of the dynamics of CH4 emissions and the respective meteorological drivers. Furthermore, such models combined with tree models (interactions between the explanatory variables), can visualise precise dynamics and easily applied to individual sites. These models are simple tools in understanding of these complex fluxes, as they can include a variety of drivers, and their relevance tested by the model. Model input variables should be as independent as possible (avoiding cross-correlation), avoiding redundant inputs, as models should follow the principle of parsimony of being simple but not too simple. Wood SN (2001). mgcv: GAMs and generalized ridge regression for R. R news.

  1. Depicting Occlusion in Early Renaissance Art

    Science.gov (United States)

    Gillam, Barbara

    2011-01-01

    The artist attempting to give the impression of three-dimensional relationships must convey somehow that one surface is in front of another. There is a large and venerable literature in Psychology on this subject, showing how figure-ground, border ownership and amodal completion and continuation are determined but there is almost no discussion of how artist's have recruited these and other principles to create convincing impressions of occlusion. Even Gombrich (Art & Illusion 1960) only considers the situation in which a figure has to be imagined from very partial cues, not how juxtaposed elements in art are parsed perceptually into occluding and occluded surfaces. In this paper I shall discuss approaches to occlusion present in early Renaissance art and the degree to which the principles now well-known to Psychologists were discovered and used, as artists increasingly depicted naturalistic scenes. Among the preoccupations of these artists, as indicated by their work, were whether and how much to occlude faces (and the related issue of the management of haloes), occlusion of and by architectural features, and the importance or otherwise of transitivity in occlusion relationships within the scene. They also clearly used the ground plane, high viewpoints and arrangements of contour terminations, as well as more conventional figural cues, to disambiguate perceived occlusion or to avoid the confusion of multiple surfaces.

  2. Depicting Occlusion in Early Renaissance Art

    Directory of Open Access Journals (Sweden)

    Barbara Gillam

    2011-05-01

    Full Text Available The artist attempting to give the impression of three-dimensional relationships must convey somehow that one surface is in front of another. There is a large and venerable literature in Psychology on this subject, showing how figure-ground, border ownership and amodal completion and continuation are determined but there is almost no discussion of how artist's have recruited these and other principles to create convincing impressions of occlusion. Even Gombrich (Art & Illusion 1960 only considers the situation in which a figure has to be imagined from very partial cues, not how juxtaposed elements in art are parsed perceptually into occluding and occluded surfaces. In this paper I shall discuss approaches to occlusion present in early Renaissance art and the degree to which the principles now well-known to Psychologists were discovered and used, as artists increasingly depicted naturalistic scenes. Among the preoccupations of these artists, as indicated by their work, were whether and how much to occlude faces (and the related issue of the management of haloes, occlusion of and by architectural features, and the importance or otherwise of transitivity in occlusion relationships within the scene. They also clearly used the ground plane, high viewpoints and arrangements of contour terminations, as well as more conventional figural cues, to disambiguate perceived occlusion or to avoid the confusion of multiple surfaces.

  3. Memory and Oblivion. Testimonies and Depictions

    Directory of Open Access Journals (Sweden)

    Meyer, Eugenia

    2012-05-01

    Full Text Available If everything is history, then, in his work, the historian acknowledges both memory and oblivion when creating those depictions that constitute his never-ending commitment, and hence assumes the responsibility of creating and preserving new sources for a new history. Recovering memory and combating oblivion signify a challenge to ceaselessly denounce injustices. One endeavors to write a history that recovers and preserves different versions of the facts, seen from the most diverse viewpoints and in the light of all manner of interests, and this implies carrying out a task that precedes that of deconstruction, so as to subsequently embark on the heroic feat of splitting hairs, while taking into account different opinions and viewpoints that express the events themselves in many ways. In short, the historian is both a witness of -and a protagonist in- his times.

    Si todo es historia, el oficio de historiar reconoce tanto la memoria como el olvido en la construcción de representaciones que se signifiquen como compromiso permanente del historiador. En consecuencia, asume la responsabilidad de generar y salvaguardar nuevas fuentes para una nueva historia. Recuperar la memoria y luchar en contra del olvido presuponen un desafío que se significa como denuncia permanente. Se intenta una historia que recupere y salvaguarde las diferentes versiones de los hechos, desde las ópticas e intereses más diversos. Ello conlleva una tarea previa de deconstrucción, para luego dar paso a la hazaña de hilar fino, atendiendo a voces y miradas diversas que expresan en formas múltiples el propio acontecer. A fin de cuentas, el historiador como testigo y protagonista de su tiempo.

  4. Results of steel containment vessel model test

    International Nuclear Information System (INIS)

    Luk, V.K.; Ludwigsen, J.S.; Hessheimer, M.F.; Komine, Kuniaki; Matsumoto, Tomoyuki; Costello, J.F.

    1998-05-01

    A series of static overpressurization tests of scale models of nuclear containment structures is being conducted by Sandia National Laboratories for the Nuclear Power Engineering Corporation of Japan and the US Nuclear Regulatory Commission. Two tests are being conducted: (1) a test of a model of a steel containment vessel (SCV) and (2) a test of a model of a prestressed concrete containment vessel (PCCV). This paper summarizes the conduct of the high pressure pneumatic test of the SCV model and the results of that test. Results of this test are summarized and are compared with pretest predictions performed by the sponsoring organizations and others who participated in a blind pretest prediction effort. Questions raised by this comparison are identified and plans for posttest analysis are discussed

  5. Facebook dethroned: Revealing the more likely social media destinations for college students' depictions of underage drinking.

    Science.gov (United States)

    Boyle, Sarah C; Earle, Andrew M; LaBrie, Joseph W; Ballou, Kayla

    2017-02-01

    Studies examining representations of college drinking on social media have almost exclusively focused on Facebook. However, recent research suggests college students may be more influenced by peers' alcohol-related posts on Instagram and Snapchat, two image-based platforms popular among this demographic. One potential explanation for this differential influence is that qualitative distinctions in the types of alcohol-related content posted by students on these three platforms may exist. Informed by undergraduate focus groups, this study examined the hypothesis that, of the three platforms, students tend to use Instagram most often for photos glamourizing drinking and Snapchat for incriminating photos of alcohol misuse and negative consequences. Undergraduate research assistants aided investigators in developing hypothetical vignettes and photographic examples of posts both glamorizing and depicting negative consequences associated with college drinking. In an online survey, vignette and photo stimuli were followed by counterbalanced paired comparisons that presented each possible pair of social media platforms. Undergraduates (N=196) selected the platform from each pair on which they would be more likely to see each post. Generalized Bradley-Terry models examined the probabilities of platform selections. As predicted, Instagram was seen as the most probable destination (and Facebook least probable) for photos depicting alcohol use as attractive and glamorous. Conversely, Snapchat was selected as the most probable destination (and Facebook least probable) for items depicting negative consequences associated with heavy drinking. Results suggest researchers aiming to mitigate the potential influences associated with college students' glamorous and consequential alcohol-related photos posted social media posts should shift their focus from Facebook to Instagram and Snapchat. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Facebook dethroned: Revealing the more likely social media destinations for college students’ depictions of underage drinking

    Science.gov (United States)

    Boyle, Sarah C.; Earle, Andrew M.; LaBrie, Joseph W.; Ballou, Kayla

    2016-01-01

    Studies examining representations of college drinking on social media have almost exclusively focused on Facebook. However, recent research suggests college students may be more influenced by peers’ alcohol-related posts on Instagram and Snapchat, two image-based platforms popular among this demographic. One potential explanation for this differential influence is that qualitative distinctions in the types of alcohol-related content posted by students on these three platforms may exist. Informed by undergraduate focus groups, this study examined the hypothesis that, of the three platforms, students tend to use Instagram most often for photos glamourizing drinking and Snapchat for incriminating photos of alcohol misuse and negative consequences. Undergraduate research assistants aided investigators in developing hypothetical vignettes and photographic examples of posts both glamorizing and depicting negative consequences associated with college drinking. In an online survey, vignette and photo stimuli were followed by counterbalanced paired comparisons that presented each possible pair of social media platforms. Undergraduates (N=196) selected the platform from each pair on which they would be more likely to see each post. Generalized Bradley-Terry models examined the probabilities of platform selections. As predicted, Instagram was seen as the most probable destination (and Facebook least probable) for photos depicting alcohol use as attractive and glamorous. Conversely, Snapchat was selected as the most probable destination (and Facebook least probable) for items depicting negative consequences associated with heavy drinking. Results suggest researchers aiming to mitigate the potential influences associated with college students’ glamorous and consequential alcohol-related photos posted social media posts should shift their focus from Facebook to Instagram and Snapchat. PMID:27776267

  7. A physiological production model for cacao : results of model simulations

    NARCIS (Netherlands)

    Zuidema, P.A.; Leffelaar, P.A.

    2002-01-01

    CASE2 is a physiological model for cocoa (Theobroma cacao L.) growth and yield. This report introduces the CAcao Simulation Engine for water-limited production in a non-technical way and presents simulation results obtained with the model.

  8. Interpreting Results from the Multinomial Logit Model

    DEFF Research Database (Denmark)

    Wulff, Jesper

    2015-01-01

    This article provides guidelines and illustrates practical steps necessary for an analysis of results from the multinomial logit model (MLM). The MLM is a popular model in the strategy literature because it allows researchers to examine strategic choices with multiple outcomes. However, there seem...... to be systematic issues with regard to how researchers interpret their results when using the MLM. In this study, I present a set of guidelines critical to analyzing and interpreting results from the MLM. The procedure involves intuitive graphical representations of predicted probabilities and marginal effects...... suitable for both interpretation and communication of results. The pratical steps are illustrated through an application of the MLM to the choice of foreign market entry mode....

  9. The semantics of depictive secondary predication in chiShona ...

    African Journals Online (AJOL)

    It will be argued that in the chiShona language the subject and object orientation of the depictives is influenced by the overt agreement marking system. While in other languages, like English, it is argued that object-oriented depictives of activity verbs are ungrammatical, chiShona provides evidence as one of the languages ...

  10. Focal Length Affects Depicted Shape and Perception of Facial Images.

    Directory of Open Access Journals (Sweden)

    Vít Třebický

    Full Text Available Static photographs are currently the most often employed stimuli in research on social perception. The method of photograph acquisition might affect the depicted subject's facial appearance and thus also the impression of such stimuli. An important factor influencing the resulting photograph is focal length, as different focal lengths produce various levels of image distortion. Here we tested whether different focal lengths (50, 85, 105 mm affect depicted shape and perception of female and male faces. We collected three portrait photographs of 45 (22 females, 23 males participants under standardized conditions and camera setting varying only in the focal length. Subsequently, the three photographs from each individual were shown on screen in a randomized order using a 3-alternative forced-choice paradigm. The images were judged for attractiveness, dominance, and femininity/masculinity by 369 raters (193 females, 176 males. Facial width-to-height ratio (fWHR was measured from each photograph and overall facial shape was analysed employing geometric morphometric methods (GMM. Our results showed that photographs taken with 50 mm focal length were rated as significantly less feminine/masculine, attractive, and dominant compared to the images taken with longer focal lengths. Further, shorter focal lengths produced faces with smaller fWHR. Subsequent GMM revealed focal length significantly affected overall facial shape of the photographed subjects. Thus methodology of photograph acquisition, focal length in this case, can significantly affect results of studies using photographic stimuli perhaps due to different levels of perspective distortion that influence shapes and proportions of morphological traits.

  11. The Danish national passenger modelModel specification and results

    DEFF Research Database (Denmark)

    Rich, Jeppe; Hansen, Christian Overgaard

    2016-01-01

    , the paper provides a description of a large-scale forecast model with a discussion of the linkage between population synthesis, demand and assignment. Secondly, the paper gives specific attention to model specification and in particular choice of functional form and cost-damping. Specifically we suggest...... a family of logarithmic spline functions and illustrate how it is applied in the model. Thirdly and finally, we evaluate model sensitivity and performance by evaluating the distance distribution and elasticities. In the paper we present results where the spline-function is compared with more traditional...... function types and it is indicated that the spline-function provides a better description of the data. Results are also provided in the form of a back-casting exercise where the model is tested in a back-casting scenario to 2002....

  12. Body shape and size depictions of African American women in JET magazine, 1953-2006.

    Science.gov (United States)

    Dawson-Andoh, Nana A; Gray, James J; Soto, José A; Parker, Scott

    2011-01-01

    Depictions of Caucasian women in the mainstream media have become increasingly thinner in size and straighter in shape. These changes may be inconsistent with the growing influence of African American beauty ideals, which research has established as more accepting of larger body sizes and more curvaceous body types than Caucasians. The present study looked at trends in the portrayal of African American women featured in JET magazine from 1953 to 2006. Beauty of the Week (BOW) images were collected and analyzed to examine body size (estimated by independent judges) and body shape (estimated by waist-to-hip ratio). We expected body sizes to increase and body shapes to become more curvaceous. Results revealed a rise in models' body size consistent with expectations, but an increase in waist-to-hip ratio, contrary to prediction. Our findings suggest that the African American feminine beauty ideal reflects both consistencies with and departures from mainstream cultural ideals. Copyright © 2010 Elsevier Ltd. All rights reserved.

  13. Food depictions in picture books for preschool children: Frequency, centrality, and affect.

    Science.gov (United States)

    Goldman, Jane A; Descartes, Lara

    2016-01-01

    The food content and messages depicted in popular children's picture books were examined using a set of 100 "Favorite Books for Preschoolers." Sixty-nine of these books depicted food and comprised the sample. Examined were: the types and frequencies of food depicted in the text and/or illustrations of the books; the centrality (central, background); and the affect (positive, neutral, or negative) of those depictions. Each food item was counted, categorized by type, and where possible, coded for centrality and affect. Fruit was the most frequently depicted food, followed by sweetened baked goods, dairy, and vegetables. However, centrality and affect differed for these foods. For example, sweet baked goods were high in both centrality and affect. In contrast vegetables were relatively high in centrality but most often neutral in affect. Ice cream, although not in many books, always was associated with positive outcomes. Results were compared to findings in the literature on food messages presented in children's television programs. The ratio of healthy foods to nutrient-poor foods was higher in the books. However, as in television, the books emphasized the desirability of sweetened foods. The results point to the need for detailed analyses of the types of presentations associated with different foods presented in books for children, as well as for continued investigations into food messages in the growing range of media available to young children. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Scale Model Thruster Acoustic Measurement Results

    Science.gov (United States)

    Vargas, Magda; Kenny, R. Jeremy

    2013-01-01

    The Space Launch System (SLS) Scale Model Acoustic Test (SMAT) is a 5% scale representation of the SLS vehicle, mobile launcher, tower, and launch pad trench. The SLS launch propulsion system will be comprised of the Rocket Assisted Take-Off (RATO) motors representing the solid boosters and 4 Gas Hydrogen (GH2) thrusters representing the core engines. The GH2 thrusters were tested in a horizontal configuration in order to characterize their performance. In Phase 1, a single thruster was fired to determine the engine performance parameters necessary for scaling a single engine. A cluster configuration, consisting of the 4 thrusters, was tested in Phase 2 to integrate the system and determine their combined performance. Acoustic and overpressure data was collected during both test phases in order to characterize the system's acoustic performance. The results from the single thruster and 4- thuster system are discussed and compared.

  15. CMS standard model Higgs boson results

    Directory of Open Access Journals (Sweden)

    Garcia-Abia Pablo

    2013-11-01

    Full Text Available In July 2012 CMS announced the discovery of a new boson with properties resembling those of the long-sought Higgs boson. The analysis of the proton-proton collision data recorded by the CMS detector at the LHC, corresponding to integrated luminosities of 5.1 fb−1 at √s = 7 TeV and 19.6 fb−1 at √s = 8 TeV, confirm the Higgs-like nature of the new boson, with a signal strength associated with vector bosons and fermions consistent with the expectations for a standard model (SM Higgs boson, and spin-parity clearly favouring the scalar nature of the new boson. In this note I review the updated results of the CMS experiment.

  16. Revisiting Runoff Model Calibration: Airborne Snow Observatory Results Allow Improved Modeling Results

    Science.gov (United States)

    McGurk, B. J.; Painter, T. H.

    2014-12-01

    Deterministic snow accumulation and ablation simulation models are widely used by runoff managers throughout the world to predict runoff quantities and timing. Model fitting is typically based on matching modeled runoff volumes and timing with observed flow time series at a few points in the basin. In recent decades, sparse networks of point measurements of the mountain snowpacks have been available to compare with modeled snowpack, but the comparability of results from a snow sensor or course to model polygons of 5 to 50 sq. km is suspect. However, snowpack extent, depth, and derived snow water equivalent have been produced by the NASA/JPL Airborne Snow Observatory (ASO) mission for spring of 20013 and 2014 in the Tuolumne River basin above Hetch Hetchy Reservoir. These high-resolution snowpack data have exposed the weakness in a model calibration based on runoff alone. The U.S. Geological Survey's Precipitation Runoff Modeling System (PRMS) calibration that was based on 30-years of inflow to Hetch Hetchy produces reasonable inflow results, but modeled spatial snowpack location and water quantity diverged significantly from the weekly measurements made by ASO during the two ablation seasons. The reason is that the PRMS model has many flow paths, storages, and water transfer equations, and a calibrated outflow time series can be right for many wrong reasons. The addition of a detailed knowledge of snow extent and water content constrains the model so that it is a better representation of the actual watershed hydrology. The mechanics of recalibrating PRMS to the ASO measurements will be described, and comparisons in observed versus modeled flow for both a small subbasin and the entire Hetch Hetchy basin will be shown. The recalibrated model provided a bitter fit to the snowmelt recession, a key factor for water managers as they balance declining inflows with demand for power generation and ecosystem releases during the final months of snow melt runoff.

  17. Immersive visualization of dynamic CFD model results

    International Nuclear Information System (INIS)

    Comparato, J.R.; Ringel, K.L.; Heath, D.J.

    2004-01-01

    With immersive visualization the engineer has the means for vividly understanding problem causes and discovering opportunities to improve design. Software can generate an interactive world in which collaborators experience the results of complex mathematical simulations such as computational fluid dynamic (CFD) modeling. Such software, while providing unique benefits over traditional visualization techniques, presents special development challenges. The visualization of large quantities of data interactively requires both significant computational power and shrewd data management. On the computational front, commodity hardware is outperforming large workstations in graphical quality and frame rates. Also, 64-bit commodity computing shows promise in enabling interactive visualization of large datasets. Initial interactive transient visualization methods and examples are presented, as well as development trends in commodity hardware and clustering. Interactive, immersive visualization relies on relevant data being stored in active memory for fast response to user requests. For large or transient datasets, data management becomes a key issue. Techniques for dynamic data loading and data reduction are presented as means to increase visualization performance. (author)

  18. Linkage of PRA models. Phase 1, Results

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C.L.; Knudsen, J.K.; Kelly, D.L.

    1995-12-01

    The goal of the Phase I work of the ``Linkage of PRA Models`` project was to postulate methods of providing guidance for US Nuclear Regulator Commission (NRC) personnel on the selection and usage of probabilistic risk assessment (PRA) models that are best suited to the analysis they are performing. In particular, methods and associated features are provided for (a) the selection of an appropriate PRA model for a particular analysis, (b) complementary evaluation tools for the analysis, and (c) a PRA model cross-referencing method. As part of this work, three areas adjoining ``linking`` analyses to PRA models were investigated: (a) the PRA models that are currently available, (b) the various types of analyses that are performed within the NRC, and (c) the difficulty in trying to provide a ``generic`` classification scheme to groups plants based upon a particular plant attribute.

  19. Engineering Glass Passivation Layers -Model Results

    Energy Technology Data Exchange (ETDEWEB)

    Skorski, Daniel C.; Ryan, Joseph V.; Strachan, Denis M.; Lepry, William C.

    2011-08-08

    The immobilization of radioactive waste into glass waste forms is a baseline process of nuclear waste management not only in the United States, but worldwide. The rate of radionuclide release from these glasses is a critical measure of the quality of the waste form. Over long-term tests and using extrapolations of ancient analogues, it has been shown that well designed glasses exhibit a dissolution rate that quickly decreases to a slow residual rate for the lifetime of the glass. The mechanistic cause of this decreased corrosion rate is a subject of debate, with one of the major theories suggesting that the decrease is caused by the formation of corrosion products in such a manner as to present a diffusion barrier on the surface of the glass. Although there is much evidence of this type of mechanism, there has been no attempt to engineer the effect to maximize the passivating qualities of the corrosion products. This study represents the first attempt to engineer the creation of passivating phases on the surface of glasses. Our approach utilizes interactions between the dissolving glass and elements from the disposal environment to create impermeable capping layers. By drawing from other corrosion studies in areas where passivation layers have been successfully engineered to protect the bulk material, we present here a report on mineral phases that are likely have a morphological tendency to encrust the surface of the glass. Our modeling has focused on using the AFCI glass system in a carbonate, sulfate, and phosphate rich environment. We evaluate the minerals predicted to form to determine the likelihood of the formation of a protective layer on the surface of the glass. We have also modeled individual ions in solutions vs. pH and the addition of aluminum and silicon. These results allow us to understand the pH and ion concentration dependence of mineral formation. We have determined that iron minerals are likely to form a complete incrustation layer and we plan

  20. Modeling and Field Results from Seismic Stimulation

    International Nuclear Information System (INIS)

    Majer, E.; Pride, S.; Lo, W.; Daley, T.; Nakagawa, Seiji; Sposito, Garrison; Roberts, P.

    2006-01-01

    Modeling the effect of seismic stimulation employing Maxwell-Boltzmann theory shows that the important component of stimulation is mechanical rather than fluid pressure effects. Modeling using Biot theory (two phases) shows that the pressure effects diffuse too quickly to be of practical significance. Field data from actual stimulation will be shown to compare to theory

  1. Possible Halo Depictions in the Prehistoric Rock Art of Utah

    Science.gov (United States)

    Sassen, Kenneth

    1994-01-01

    In western American rock art the concentric circle symbol, which is widely regarded as a sun symbol, is ubiquitous. We provide evidence from Archaic and Fremont Indian rock art sites in northwestern Utah that at least one depiction was motivated by an observation of a complex halo display. Cirrus cloud optical displays are linked in both folklore and meteorology to precipitation-producing weather situations, which, in combination with an abundance of weather-related rock art symbolism, indicate that such images reflected the ceremonial concerns of the indigenous cultures for ensuring adequate precipitation. As has been shown to be the case with rock art rainbows, conventionalization of the halo image may have resulted in simple patterns that lacked recognizable details of atmospheric optical phenomena. However, in one case in which an Archaic-style petroglyph (probably 1500 yr or more old) satisfactorily reproduced a complicated halo display that contained parhelia and tangent arcs, sufficient geometric information is rendered to indicate a solar elevation angle of approx. 40 deg. at the time of observation.

  2. Coupled Michigan MHD - Rice Convection Model Results

    Science.gov (United States)

    de Zeeuw, D.; Sazykin, S.; Wolf, D.; Gombosi, T.; Powell, K.

    2002-12-01

    A new high performance Rice Convection Model (RCM) has been coupled to the adaptive-grid Michigan MHD model (BATSRUS). This fully coupled code allows us to self-consistently simulate the physics in the inner and middle magnetosphere. A study will be presented of the basic characteristics of the inner and middle magnetosphere in the context of a single coupled-code run for idealized storm inputs. The analysis will include region-2 currents, shielding of the inner magnetosphere, partial ring currents, pressure distribution, magnetic field inflation, and distribution of pV^gamma.

  3. Graphical interpretation of numerical model results

    International Nuclear Information System (INIS)

    Drewes, D.R.

    1979-01-01

    Computer software has been developed to produce high quality graphical displays of data from a numerical grid model. The code uses an existing graphical display package (DISSPLA) and overcomes some of the problems of both line-printer output and traditional graphics. The software has been designed to be flexible enough to handle arbitrarily placed computation grids and a variety of display requirements

  4. Ignalina NPP Safety Analysis: Models and Results

    International Nuclear Information System (INIS)

    Uspuras, E.

    1999-01-01

    Research directions, linked to safety assessment of the Ignalina NPP, of the scientific safety analysis group are presented: Thermal-hydraulic analysis of accidents and operational transients; Thermal-hydraulic assessment of Ignalina NPP Accident Localization System and other compartments; Structural analysis of plant components, piping and other parts of Main Circulation Circuit; Assessment of RBMK-1500 reactor core and other. Models and main works carried out last year are described. (author)

  5. Modeling clicks beyond the first result page

    NARCIS (Netherlands)

    Chuklin, A.; Serdyukov, P.; de Rijke, M.

    2013-01-01

    Most modern web search engines yield a list of documents of a fixed length (usually 10) in response to a user query. The next ten search results are usually available in one click. These documents either replace the current result page or are appended to the end. Hence, in order to examine more

  6. Nelson Rholihlahla Mandela: Personality traits as depicted in ...

    African Journals Online (AJOL)

    This article investigates the depiction of Nelson Mandela's personality traits in selected isiXhosa poetry. The aspects of Mandela's personality that feature prominently include his bravery, determination, humility, goodness, peace, and tactical skills. The theoretical framework that underpins this study will be discussed briefly ...

  7. Microplasticity of MMC. Experimental results and modelling

    Energy Technology Data Exchange (ETDEWEB)

    Maire, E. (Groupe d' Etude de Metallurgie Physique et de Physique des Materiaux, INSA, 69 Villeurbanne (France)); Lormand, G. (Groupe d' Etude de Metallurgie Physique et de Physique des Materiaux, INSA, 69 Villeurbanne (France)); Gobin, P.F. (Groupe d' Etude de Metallurgie Physique et de Physique des Materiaux, INSA, 69 Villeurbanne (France)); Fougeres, R. (Groupe d' Etude de Metallurgie Physique et de Physique des Materiaux, INSA, 69 Villeurbanne (France))

    1993-11-01

    The microplastic behavior of several MMC is investigated by means of tension and compression tests. This behavior is assymetric : the proportional limit is higher in tension than in compression but the work hardening rate is higher in compression. These differences are analysed in terms of maxium of the Tresca's shear stress at the interface (proportional limit) and of the emission of dislocation loops during the cooling (work hardening rate). On another hand, a model is proposed to calculate the value of the yield stress, describing the composite as a material composed of three phases : inclusion, unaffected matrix and matrix surrounding the inclusion having a gradient in the density of the thermally induced dilocations. (orig.).

  8. The depiction of electroconvulsive therapy in Hindi cinema.

    Science.gov (United States)

    Andrade, Chittaranjan; Shah, Nilesh; Venkatesh, Basappa K

    2010-03-01

    There is little literature on the depiction of electroconvulsive therapy (ECT) in movies. In India, Hindi cinema is an important source of public information and misinformation about ECT. We identified depictions of ECT in Hindi cinema through inquiries with e-communities, video libraries, and other sources. We also searched the PubMed database using search terms related to ECT and movies. Between 1967 and 2008, 13 Hindi movies contained referrals to or depictions of ECT. By and large, the depictions were inaccurate, distorted, and dramatized. Electroconvulsive therapy was administered to punish, to obliterate identity, to induce insanity, and for other rarely clinically valid indications. Electroconvulsive therapy was almost always administered by force. Premedication was rare. Genuine ECT devices were uncommonly used. Electroconvulsive therapy stimulation almost invariably appeared to cause pain. Multiple shocks were frequently delivered in the same session. The convulsions were usually bizarre. The treatment caused mental disturbance, amnesia, weakness, and even a zombielike state, thought not mortality; clinical improvement was rare. There was no pattern of increasing accuracy of depiction of ECT with recency of movie release. We examine the extent to which the identified inaccuracies are practically important and offer reasons for the inaccuracies. Although the inaccuracies are a cause for concern, we suggest that because Hindi cinema is generally hyperbolic, the public may be willing to distinguish real life from reel life when facing clinical decisions about ECT. Nevertheless, considering the potential for harm in the dissemination of misinformation, filmmakers should exhibit a greater sense of ethics when creating impressions that might adversely influence health.

  9. Graphic Depictions: Portrayals of Mental Illness in Video Games.

    Science.gov (United States)

    Shapiro, Samuel; Rotter, Merrill

    2016-11-01

    Although studies have examined portrayals of mental illness in the mass media, little attention has been paid to such portrayals in video games. In this descriptive study, the fifty highest-selling video games in each year from 2011 to 2013 were surveyed through application of search terms to the Wikia search engine, with subsequent review of relevant footage on YouTube. Depiction categories were then assigned based on the extent of portrayal and qualitative characteristics compared against mental illness stereotypes in cinema. Twenty-three of the 96 surveyed games depicted at least one character with mental illness. Forty-two characters were identified as portraying mental illness, with most characters classified under a "homicidal maniac" stereotype, although many characters did not clearly reflect cinema stereotypes and were subcategorized based on the shared traits. Video games contain frequent and varied portrayals of mental illness, with depictions most commonly linking mental illness to dangerous and violent behaviors. © 2016 American Academy of Forensic Sciences.

  10. Judgments toward male and transgendered victims in a depicted stranger rape.

    Science.gov (United States)

    Davies, Michelle; Hudson, Jenefer

    2011-01-01

    There has been an increasing amount of research interest into perceptions of male rape in recent years. However, no research has assessed how people react when a transgendered person is raped. The aim of this study was to investigate the effects of transgendered status and sexuality on victim blame and perceived severity in a depicted rape scenario. The sexuality of the victim was manipulated to include a heterosexual, homosexual, cross-dresser, female-to-male transsexual, and male-to-female transsexual. It was predicted that the heterosexual victims would be judged the most positively and that heterosexual male participants would make the most anti-victim judgments. One hundred thirty-three lesbian, gay male, and heterosexual members of the general population read a scenario depicting a rape and then completed a questionnaire measuring victim blame and perceived severity of the assault. Results conformed to the predictions. Results are discussed in relation to traditional gender roles and homophobia.

  11. Towards a More Realistic Depiction of the Earth's Surface on Maps

    Science.gov (United States)

    Drachal, Jacek; Dębowska, Anna

    2014-06-01

    In 2000, the shuttle radar topography mission (SRTM) produced the most complete, highest resolution digital elevation model (DEM) of the Earth. These data were used to create global 3″ DEM and to correct 30″ DEM which are both available on the internet. After a careful survey in the Institute of Geodesy and Cartography, Poland, these elevation data were recognized as extremely valuable and worth developing a unique form of visualization. As a result, a new design of a physical map of Europe at scale of 1:10 million was developed. For depicting the shape of the terrain, an original modification of combined shaded relief was employed, to reveal all the nuances of elevation data. True colors of the Earth's surface represented on the map originated from MODIS satellite image. The combination of true colors and terrain features made a realistic map, showing the landscapes as if from a point above the Earth. The image of the terrain is extremely detailed as it is based on the abundance of data defining the elevation of each point of land.

  12. Life imitating art: depictions of the hidden curriculum in medical television programs.

    Science.gov (United States)

    Stanek, Agatha; Clarkin, Chantalle; Bould, M Dylan; Writer, Hilary; Doja, Asif

    2015-09-26

    The hidden curriculum represents influences occurring within the culture of medicine that indirectly alter medical professionals' interactions, beliefs and clinical practices throughout their training. One approach to increase medical student awareness of the hidden curriculum is to provide them with readily available examples of how it is enacted in medicine; as such the purpose of this study was to examine depictions of the hidden curriculum in popular medical television programs. One full season of ER, Grey's Anatomy and Scrubs were selected for review. A summative content analysis was performed to ascertain the presence of depictions of the hidden curriculum, as well as to record the type, frequency and quality of examples. A second reviewer also viewed a random selection of episodes from each series to establish coding reliability. The most prevalent themes across all television programs were: the hierarchical nature of medicine; challenges during transitional stages in medicine; the importance of role modeling; patient dehumanization; faking or overstating one's capabilities; unprofessionalism; the loss of idealism; and difficulties with work-life balance. The hidden curriculum is frequently depicted in popular medical television shows. These examples of the hidden curriculum could serve as a valuable teaching resource in undergraduate medical programs.

  13. Improved Depiction of Pterygopalatine Fossa Anatomy Using Ultrahigh-Resolution Magnetic Resonance Imaging at 7 Tesla

    Directory of Open Access Journals (Sweden)

    K. P. Q. Oomen

    2012-01-01

    Full Text Available Purpose. To study the anatomy of the pterygopalatine fossa (PPF using ultrahigh-resolution magnetic resonance imaging. Methods. A human cadaveric tissue block containing the pterygopalatine fossa was examined on a clinical 7-Tesla magnetic resonance imaging system. Subsequently, cryosections of the tissue block were created in a coronal plane. The cryosections were photographed and collected on adhesive tape. The on-tape sections were stained for Mallory-Cason, in order to detail the anatomic structures within the fossa. Magnetic resonance images were compared with surface photos of the tissue block and on-tape sections. Results. High-resolution magnetic resonance images demonstrated the common macroscopic structures in the PPF. Smaller structures, best viewed at the level of the operation microscope, which have previously been obscured on magnetic resonance imaging, could be depicted. Some of the orbital pterygopalatine ganglion branches and the pharyngeal nerve were clearly viewed. Conclusions. In our experience with one human cadaver specimen, magnetic resonance imaging at 7 Tesla seems effective in depicting pterygopalatine fossa anatomy and provides previously unseen details through its demonstration of the pharyngeal nerve and the orbital pterygopalatine ganglion branches. The true viability of depicting the pterygopalatine fossa with ultrahigh-resolution MR will depend on confirmation of our results in larger studies.

  14. The depiction of marketing and marketers in the news media

    OpenAIRE

    Cluley, Robert

    2016-01-01

    Purpose – In an effort to explain the high level of scepticism and distrust towards marketing and marketers, paper explores how marketing practice and practitioners are depicted in the mass media.\\ud Design/methodology/approach – The paper analyses 6,877 news reports that discuss “marketing” across two one-year time periods from three UK newspapers. A systematic content analysis is presented through N-Grams and K-Grams, close readings of individual cases and manual coding.\\ud Findings – The p...

  15. Video-Game-Like Engine for Depicting Spacecraft Trajectories

    Science.gov (United States)

    Upchurch, Paul R.

    2009-01-01

    GoView is a video-game-like software engine, written in the C and C++ computing languages, that enables real-time, three-dimensional (3D)-appearing visual representation of spacecraft and trajectories (1) from any perspective; (2) at any spatial scale from spacecraft to Solar-system dimensions; (3) in user-selectable time scales; (4) in the past, present, and/or future; (5) with varying speeds; and (6) forward or backward in time. GoView constructs an interactive 3D world by use of spacecraft-mission data from pre-existing engineering software tools. GoView can also be used to produce distributable application programs for depicting NASA orbital missions on personal computers running the Windows XP, Mac OsX, and Linux operating systems. GoView enables seamless rendering of Cartesian coordinate spaces with programmable graphics hardware, whereas prior programs for depicting spacecraft trajectories variously require non-Cartesian coordinates and/or are not compatible with programmable hardware. GoView incorporates an algorithm for nonlinear interpolation between arbitrary reference frames, whereas the prior programs are restricted to special classes of inertial and non-inertial reference frames. Finally, whereas the prior programs present complex user interfaces requiring hours of training, the GoView interface provides guidance, enabling use without any training.

  16. Reach Out and Eat: Food and Beverages Depicted in Books for Preschoolers.

    Science.gov (United States)

    England, Jessica L; Linchey, Jennifer; Madsen, Kristine A; Patel, Anisha I

    2015-11-01

    To examine food and beverage depictions in books for preschoolers. Books for preschoolers from Reach Out and Read (ROR; n = 42), public library (n = 27), and Publisher's Weekly booklists (n = 31) were examined for nutritive and empty-calorie food and beverage depictions. It was found that 66% of books depicted at least 1 food or beverage. More books depicted nutritive items than empty-calorie items (87.5% vs 54.7%, P books than in other booklists. Yet nearly half of ROR books depicted at least 1 empty-calorie item. ROR books also accounted for 5 of 10 books with the most empty-calorie item depictions and 3 of 4 books with branding. With regard to messaging, approximately a third of books with the most empty-calorie depictions promoted unhealthy foods. When selecting books for ROR, it may be important to consider food and beverage depictions and messages. © The Author(s) 2015.

  17. Surgically repaired cleft lips depicted in paintings of the late Gothic period and the Renaissance.

    Science.gov (United States)

    Pirsig, W; Haase, S; Palm, F

    2001-04-01

    Paintings and drawings by Lucas Moser, Leonardo da Vinci, Albrecht Dürer, and Jacob Cornelisz van Oostsanen suggest that they employed people who had had cleft lips operated on as models for their works of art. Created between 1431 and 1520, the portraits show diagnostic facial profiles with a curved nasal dorsum, short columella, maxillary retrusion, and pseudoprogenia. The first medical illustration of cleft lip surgery was published in 1564 by Ambroise Paré. It was therefore late Gothic and Renaissance artists who depicted the conspicuous signs of surgically treated patients with cleft lip more than 130 years before the surgeons. Copyright 2001 The British Association of Oral and Maxillofacial Surgeons.

  18. Depicted welfare recipient stereotypes in Norway and Denmark

    DEFF Research Database (Denmark)

    Dencker-Larsen, Sofie; Lundberg, Kjetil G.

    2016-01-01

    Welfare recipients are continuously subjected to media debates and governmental campaigns drawing on images and symbols encouraging improved work ethic and individual responsibility. Only few studies, however, have analysed how welfare recipients as ‘othered’ citizens react to these often...... stereotypical symbols and images targeting them. In this study we have investigated how welfare recipients in Norway and Denmark, and caseworkers in Denmark, understand and account for images which, through the use of stereotypes, directly or indirectly may question welfare recipients’ work ethic...... and deservedness. Analysing photo-elicitation interview data, we have uncovered a variety of reactions characterized by ‘problematization’. The interviewees problematize the image and depicted stereotypes, which they link both with motif and symbols and with surrounding public debates on the work ethic...

  19. Depicted welfare-recipient stereotypes in Norway and Denmark

    DEFF Research Database (Denmark)

    Dencker-Larsen, Sofie; Lundberg, Kjetil G.

    2016-01-01

    Welfare recipients are continuously subjected to media debates and governmental campaigns drawing on images and symbols encouraging improved work ethic and individual responsibility. Only few studies, however, have analysed how welfare recipients as ‘othered’ citizens react to these often...... stereotypical symbols and images targeting them. In this study we have investigated how welfare recipients in Norway and Denmark, and caseworkers in Denmark, understand and account for images which, through the use of stereotypes, directly or indirectly may question welfare recipients’ work ethic...... and deservedness. Analysing photo-elicitation interview data, we have uncovered a variety of reactions characterized by ‘problematization’. The interviewees problematize the image and depicted stereotypes, which they link both with motif and symbols and with surrounding public debates on the work ethic...

  20. Some results regarding the comparison of the Earth's atmospheric models

    Directory of Open Access Journals (Sweden)

    Šegan S.

    2005-01-01

    Full Text Available In this paper we examine air densities derived from our realization of aeronomic atmosphere models based on accelerometer measurements from satellites in a low Earth's orbit (LEO. Using the adapted algorithms we derive comparison parameters. The first results concerning the adjustment of the aeronomic models to the total-density model are given.

  1. Verification of aseismic design model by using experimental results

    International Nuclear Information System (INIS)

    Mizuno, N.; Sugiyama, N.; Suzuki, T.; Shibata, Y.; Miura, K.; Miyagawa, N.

    1985-01-01

    A lattice model is applied as an analysis model for an aseismic design of the Hamaoka nuclear reactor building. With object to verify an availability of this design model, two reinforced concrete blocks are constructed on the ground and the forced vibration tests are carried out. The test results are well followed by simulation analysis using the lattice model. Damping value of the ground obtained from the test is more conservative than the design value. (orig.)

  2. Recent Global Warming as Observed by AIRS and Depicted in GISSTEMP and MERRA-2

    Science.gov (United States)

    Susskind, Joel; Lee, Jae; Iredell, Lena

    2017-01-01

    AIRS Version-6 monthly mean level-3 surface temperature products confirm the result, depicted in the GISSTEMP dataset, that the earth's surface temperature has been warming since early 2015, though not before that. AIRS is at a higher spatial resolution than GISSTEMP, and produces sharper spatial features which are otherwise in excellent agreement with those of GISSTEMP. Version-6 AO Ts anomalies are consistent with those of Version-6 AIRS/AMSU. Version-7 AO anomalies should be even more accurate, especially at high latitudes. ARCs of MERRA-2 Ts anomalies are spurious as a result of a discontinuity which occurred somewhere between 2007 and 2008. This decreases global mean trends.

  3. Steel Containment Vessel Model Test: Results and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Costello, J.F.; Hashimote, T.; Hessheimer, M.F.; Luk, V.K.

    1999-03-01

    A high pressure test of the steel containment vessel (SCV) model was conducted on December 11-12, 1996 at Sandia National Laboratories, Albuquerque, NM, USA. The test model is a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of an improved Mark II boiling water reactor (BWR) containment. A concentric steel contact structure (CS), installed over the SCV model and separated at a nominally uniform distance from it, provided a simplified representation of a reactor shield building in the actual plant. The SCV model and contact structure were instrumented with strain gages and displacement transducers to record the deformation behavior of the SCV model during the high pressure test. This paper summarizes the conduct and the results of the high pressure test and discusses the posttest metallurgical evaluation results on specimens removed from the SCV model.

  4. Identifiability Results for Several Classes of Linear Compartment Models.

    Science.gov (United States)

    Meshkat, Nicolette; Sullivant, Seth; Eisenberg, Marisa

    2015-08-01

    Identifiability concerns finding which unknown parameters of a model can be estimated, uniquely or otherwise, from given input-output data. If some subset of the parameters of a model cannot be determined given input-output data, then we say the model is unidentifiable. In this work, we study linear compartment models, which are a class of biological models commonly used in pharmacokinetics, physiology, and ecology. In past work, we used commutative algebra and graph theory to identify a class of linear compartment models that we call identifiable cycle models, which are unidentifiable but have the simplest possible identifiable functions (so-called monomial cycles). Here we show how to modify identifiable cycle models by adding inputs, adding outputs, or removing leaks, in such a way that we obtain an identifiable model. We also prove a constructive result on how to combine identifiable models, each corresponding to strongly connected graphs, into a larger identifiable model. We apply these theoretical results to several real-world biological models from physiology, cell biology, and ecology.

  5. Modifying exposure to smoking depicted in movies: a novel approach to preventing adolescent smoking.

    Science.gov (United States)

    Sargent, James D; Dalton, Madeline A; Heatherton, Todd; Beach, Mike

    2003-07-01

    Most behavioral approaches to adolescent smoking address the behavior directly. We explore an indirect approach: modifying exposure to portrayals of smoking in movies. To describe adolescents' exposure to smoking in movies and to examine factors that could modify such exposure. Occurrences of smoking were counted in each of 601 popular movies. Four thousand nine hundred ten northern New England junior high school students were asked to report which movies they had seen from a randomly generated subsample of 50 films, and responses were used to estimate exposure to the entire sample. Analysis The outcome variable was exposure to movie smoking, defined as the number of smoking occurrences seen. Risk factors for exposure included access to movies (movie channels, videotape use, and movie theater); parenting (R [restricted]-rated movie restrictions, television restrictions, parenting style); and characteristics of the child (age, sex, school performance, sensation-seeking propensity, rebelliousness, and self-esteem). We used multiple regression to assess the association between risk factors and exposure to movie smoking. Subjects had seen an average of 30% of the movie sample (interquartile range, 20%-44%), from which they were exposed to 1160 (interquartile range, 640-1970) occurrences of smoking. In a multivariate model, exposure to movie smoking increased (all P values Parent restriction on viewing R-rated movies resulted in a 50% reduction in exposure to movie smoking. There was no association between parenting style and exposure to movie smoking. Much of the protective effect of parent R-rated movie restriction on adolescent smoking was mediated through lower exposure to movie smoking. Adolescents see thousands of smoking depictions in movies, and this influences their attitudes and behavior. Exposure to movie smoking is reduced when parents limit movie access. Teaching parents to monitor and enforce movie access guidelines could reduce adolescent smoking in an

  6. A tool to characterize the components of pharmacist interventions in clinical pharmacy services: the DEPICT project.

    Science.gov (United States)

    Correr, Cassyano Januario; Melchiors, Ana Carolina; de Souza, Thais T; Rotta, Inajara; Salgado, Teresa M; Fernandez-Llimos, Fernando

    2013-01-01

    The complexity of clinical pharmacy services usually leads to an inconsistent or even poor description of their interventions in scientific reports. To ensure comparability and reproducibility of the evidence, an in-depth description of pharmacist interventions is required. To validate a new tool called DEPICT (Descriptive Elements of Pharmacist Intervention Characterization Tool) to characterize clinical pharmacy services. We developed a 3-phase study. First, to create a theoretical framework, an overview of systematic reviews was performed in PubMed between 2000 and 2010. Then, an in-depth analysis of the included studies was carried out to identify a list of components in order to create the instrument. Finally, 2 independent raters separately applied the tool to a random sample of 28 randomized clinical trials extracted from the systematic reviews. Interrater agreement was evaluated using PABAK (prevalence-adjusted bias-adjusted κ) coefficient or intraclass correlation coefficient (ICC). We included 49 systematic reviews in our overview. Analysis of these studies resulted in 58 intervention components, with 57 dichotomous variables and 1 discrete variable. These items resulted in a preliminary version of the instrument. The reliability analysis showed that 8 binary items of this version had a PABAK less than or equal to 0.60. These items were then excluded or modified, resulting in a final version of the tool, with 54 items organized into 12 domains. DEPICT showed an average PABAK of 0.85 (95% CI 0.81 to 0.88) and an ICC of 1.0. Twenty items presented a PABAK value between 0.61 and 0.80 (substantial agreement) and 33 had a value between 0.81 and 1.0 (almost perfect agreement). DEPICT is a reproducible instrument for describing the components of pharmacist interventions performed as part of clinical pharmacy services. It allows retrospective analysis of published studies and can be used as a reference guide to report pharmacist interventions in future studies.

  7. Results of the Marine Ice Sheet Model Intercomparison Project, MISMIP

    Directory of Open Access Journals (Sweden)

    F. Pattyn

    2012-05-01

    Full Text Available Predictions of marine ice-sheet behaviour require models that are able to robustly simulate grounding line migration. We present results of an intercomparison exercise for marine ice-sheet models. Verification is effected by comparison with approximate analytical solutions for flux across the grounding line using simplified geometrical configurations (no lateral variations, no effects of lateral buttressing. Unique steady state grounding line positions exist for ice sheets on a downward sloping bed, while hysteresis occurs across an overdeepened bed, and stable steady state grounding line positions only occur on the downward-sloping sections. Models based on the shallow ice approximation, which does not resolve extensional stresses, do not reproduce the approximate analytical results unless appropriate parameterizations for ice flux are imposed at the grounding line. For extensional-stress resolving "shelfy stream" models, differences between model results were mainly due to the choice of spatial discretization. Moving grid methods were found to be the most accurate at capturing grounding line evolution, since they track the grounding line explicitly. Adaptive mesh refinement can further improve accuracy, including fixed grid models that generally perform poorly at coarse resolution. Fixed grid models, with nested grid representations of the grounding line, are able to generate accurate steady state positions, but can be inaccurate over transients. Only one full-Stokes model was included in the intercomparison, and consequently the accuracy of shelfy stream models as approximations of full-Stokes models remains to be determined in detail, especially during transients.

  8. Results on the symmetries of integrable fermionic models on chains

    International Nuclear Information System (INIS)

    Dolcini, F.; Montorsi, A.

    2001-01-01

    We investigate integrable fermionic models within the scheme of the graded quantum inverse scattering method, and prove that any symmetry imposed on the solution of the Yang-Baxter equation reflects on the constants of motion of the model; generalizations with respect to known results are discussed. This theorem is shown to be very effective when combined with the polynomial R-matrix technique (PRT): we apply both of them to the study of the extended Hubbard models, for which we find all the subcases enjoying several kinds of (super)symmetries. In particular, we derive a geometrical construction expressing any gl(2,1)-invariant model as a linear combination of EKS and U-supersymmetric models. Further, we use the PRT to obtain 32 integrable so(4)-invariant models. By joint use of the Sutherland's species technique and η-pairs construction we propose a general method to derive their physical features, and we provide some explicit results

  9. The Depiction of Native Americans in Recent (1991-2004) Secondary American History Textbooks: How Far Have We Come?

    Science.gov (United States)

    Sanchez, Tony R.

    2007-01-01

    This study examined 15 secondary American history textbooks to evaluate their accuracy in depicting Native Americans as a follow-up to studies by Costo and Henry (1970) and Loewen (1995). The criteria embodied an authenticity guideline based upon the Five Great Values with a rating scale between 1 (lowest) and 5 (highest). The results indicate…

  10. Susceptibility weighted imaging depicts retinal hemorrhages in abusive head trauma

    Energy Technology Data Exchange (ETDEWEB)

    Zuccoli, Giulio [Children' s Hospital of Pittsburgh of UPMC, Department of Pediatric Radiology, Pittsburgh, PA (United States); Children' s Hospital of Pittsburgh of UPMC, Department of Radiology, Pittsburgh, PA (United States); Panigrahy, Ashok; Haldipur, Anshul; Willaman, Dennis [Children' s Hospital of Pittsburgh of UPMC, Department of Pediatric Radiology, Pittsburgh, PA (United States); Squires, Janet; Wolford, Jennifer [Children' s Hospital of Pittsburgh of UPMC, Division of Child Advocacy, Pittsburgh, PA (United States); Sylvester, Christin; Mitchell, Ellen; Lope, Lee Ann [Children' s Hospital of Pittsburgh of UPMC, Eye Center, Pittsburgh, PA (United States); Nischal, Ken K. [Children' s Hospital of Pittsburgh of UPMC, Eye Center, Pittsburgh, PA (United States); Children' s Hospital of Pittsburgh of UPMC, Division of Pediatric Ophthalmology, Strabismus, and Adult Motility, Eye Center, Pittsburgh, PA (United States); Berger, Rachel P. [Children' s Hospital of Pittsburgh of UPMC, Division of Child Advocacy, Pittsburgh, PA (United States); University of Pittsburgh Medical Center, Safar Center for Resuscitation Research, Pittsburgh, PA (United States)

    2013-07-15

    This study aims to evaluate the capability of magnetic resonance imaging (MRI) susceptibility weighted images (SWI) in depicting retinal hemorrhages (RH) in abusive head trauma (AHT) compared to the gold standard dilated fundus exam (DFE). This is a retrospective, single institution, observational study on 28 patients with suspected AHT, who had a DFE and also underwent brain MRI-SWI as part of routine diagnostic protocol. Main outcome measures involved evaluation of patients to determine whether the RH could be identified on standard and high-resolution SWI sequences. Of the 21 subjects with RH on DFE, 13 (62 %) were identified by using a standard SWI sequence performed as part of brain MRI protocols. Of the 15 patients who also underwent an orbits SWI protocol, 12 (80 %) were positive for RH. None of the seven patients without RH on of DFE had RH on either standard or high-resolution SWI. Compared with DFE, the MRI standard protocol showed a sensitivity of 75 % which increased to 83 % for the orbits SWI protocol. Our study suggests the usefulness of a tailored high-resolution orbits protocol to detect RH in AHT. (orig.)

  11. Susceptibility weighted imaging depicts retinal hemorrhages in abusive head trauma

    International Nuclear Information System (INIS)

    Zuccoli, Giulio; Panigrahy, Ashok; Haldipur, Anshul; Willaman, Dennis; Squires, Janet; Wolford, Jennifer; Sylvester, Christin; Mitchell, Ellen; Lope, Lee Ann; Nischal, Ken K.; Berger, Rachel P.

    2013-01-01

    This study aims to evaluate the capability of magnetic resonance imaging (MRI) susceptibility weighted images (SWI) in depicting retinal hemorrhages (RH) in abusive head trauma (AHT) compared to the gold standard dilated fundus exam (DFE). This is a retrospective, single institution, observational study on 28 patients with suspected AHT, who had a DFE and also underwent brain MRI-SWI as part of routine diagnostic protocol. Main outcome measures involved evaluation of patients to determine whether the RH could be identified on standard and high-resolution SWI sequences. Of the 21 subjects with RH on DFE, 13 (62 %) were identified by using a standard SWI sequence performed as part of brain MRI protocols. Of the 15 patients who also underwent an orbits SWI protocol, 12 (80 %) were positive for RH. None of the seven patients without RH on of DFE had RH on either standard or high-resolution SWI. Compared with DFE, the MRI standard protocol showed a sensitivity of 75 % which increased to 83 % for the orbits SWI protocol. Our study suggests the usefulness of a tailored high-resolution orbits protocol to detect RH in AHT. (orig.)

  12. Pig liver sectorization and segmentation and virtual reality depiction

    Directory of Open Access Journals (Sweden)

    Zanchet Dinamar José

    2002-01-01

    Full Text Available OBJECTIVE: To determine pig liver sectorization and segmentation through the representation of their correlation to portal and hepatic veins, and through the development of virtual reality (VR animation. METHODS: Twenty models were obtained by injection of portal and hepatic veins from Landrace pig livers with a methyl methacrylate solution, and by corrosion of the hepatic parenchyma with chloride acid 35%. VR animation of one of these models was conducted through graphic software (3D Studio Max 3.0. RESULTS: Constant presence of eight segments and six venous drainage sectors was observed. Pig portal vein bifurcation was not noticed. Hepatic veins were named according to their embryological origin. Correlation between venous system and hepatic parenchyma was established by means of VR animation. CONCLUSION: These models facilitated both the study of pig hepatic sectors and segments, and the proposal of hepatic veins nomenclature. These models have also been used for the development of VR animated models which show the correlation between the hepatic parenchyma and the pig liver venous system as well as the observation of them from several points of view.

  13. Injury prevention practices as depicted in G-rated and PG-rated movies.

    Science.gov (United States)

    Pelletier, A R; Quinlan, K P; Sacks, J J; Van Gilder, T J; Gilchrist, J; Ahluwalia, H K

    2000-03-01

    Previous studies on alcohol, tobacco, and violence suggest that children's behavior can be influenced by mass media; however, little is known about the effect of media on unintentional injuries, the leading cause of death among young persons in the United States. To determine how injury prevention practices are depicted in G-rated (general audience) and PG-rated (parental guidance recommended) movies. Observational study. The 25 movies with the highest domestic box-office grosses and a rating of G or PG for each year from 1995 through 1997. Movies that were predominantly animated or not set in the present day were excluded from analysis. Movie characters with speaking roles. Safety belt use by motor vehicle occupants, use of a crosswalk and looking both ways by pedestrians crossing a street, helmet use by bicyclists, personal flotation device use by boaters, and selected other injury prevention practices. Fifty nonanimated movies set in the present day were included in the study. A total of 753 person-scenes involving riding in a motor vehicle, crossing the street, bicycling, and boating were shown (median, 13.5 person-scenes per movie). Forty-two person-scenes (6%) involved falls or crashes, which resulted in 4 injuries and 2 deaths. Overall, 119 (27%) of 447 motor vehicle occupants wore safety belts, 20 (18%) of 109 pedestrians looked both ways before crossing the street and 25 (16%) of 160 used a crosswalk, 4 (6%) of 64 bicyclists wore helmets, and 14 (17%) of 82 boaters wore personal flotation devices. In scenes depicting everyday life in popular movies likely to be seen by children, characters were infrequently portrayed practicing recommended safe behaviors. The consequences of unsafe behaviors were rarely shown. The entertainment industry should improve its depiction of injury prevention practices in G-rated and PG-rated movies.

  14. The Beautiful and Dangerous: A New Depiction of Heroines in North American Television Drama Series

    Directory of Open Access Journals (Sweden)

    Irena Sever Globan

    2016-06-01

    Full Text Available Television drama series are nowadays one of the most common television formats in the entertainment program genre. On the one hand, heroes and heroines of these series mirror social and cultural realities and changes, whereas on the other, they offer imitation models and shape ideas about, among other things, what being male and female means. While in the first three decades of their existence television series predominantly showed stereotypical male-female relationships through active heroes and passive housewives, in the last two decades we have witnessed changes which question the stereotypical depiction of gender roles. Television started presenting new main heroines that are equally courageous, independent, intelligent and violent as their male partners although they continue to perpetuate the stereotypical depiction in terms of physical attractiveness and sex appeal. This primarily refers to the protagonists of North American series such as Buffy, Nikita, Xena, Alias, Revenge, Rogue, etc. This paper discusses the characteristics of these new heroines in the leading roles and their potential to redefine the female character.

  15. Depiction of seizure first aid management in medical television dramas.

    Science.gov (United States)

    Moeller, Andrew D; Moeller, Jeremy J; Rahey, Susan R; Sadler, R Mark

    2011-09-01

    The objective of this study was to investigate whether medical television dramas portray proper seizure first aid. Episodes of the four highest-rated US medical dramas ("Grey's Anatomy," "House M.D.", "Private Practice," and "ER") were screened for the presence of seizures. "Patient" age, sex, semiology, and etiology were recorded. The appropriateness of seizure first aid management was determined by comparison to the Epilepsy Foundation of America (EFA) guidelines. Among 364 television programs, 65 seizures (in 59 individuals) were identified (30 males; 29 females). Seizures were primary or secondarily generalized tonic-clonic in 53 (81.5%) cases. Other seizure types included complex partial (5, 7.7%), simple partial (1, 1.5%), myoclonic (1, 1.5%), absence (1, 1.5%), and psychogenic (1, 1.5%). On 63 occasions (96.9%), first aid was performed by a health care professional. First aid management was judged appropriate in 21 (32.3%) seizures, inappropriate in 28 (43.1%), and indeterminate in 16 (24.6%). Inappropriate practices included holding the person down (17, 26.2%), trying to stop the involuntary movements (10, 15.4%) and putting something in the person's mouth (11, 16.9%). The first aid management of seizures performed by actors portraying health care professionals was inappropriate in nearly half of all cases. Inaccurate depiction of seizure first aid management may contribute to misinformation of the general public. The television industry could easily incorporate the simple first aid EFA seizure guidelines as a public service without sacrificing dramatic impact.

  16. Convergence models for cylindrical caverns and the resulting ground subsidence

    Energy Technology Data Exchange (ETDEWEB)

    Haupt, W.; Sroka, A.; Schober, F.

    1983-02-01

    The authors studied the effects of different convergence characteristics on surface soil response for the case of narrow, cylindrical caverns. Maximum ground subsidence - a parameter of major importance in this type of cavern - was calculated for different convergence models. The models were established without considering the laws of rock mechanics and rheology. As a result, two limiting convergence models were obtained that describe an interval of expectation into which all other models fit. This means that ground movements over cylindrical caverns can be calculated ''on the safe side'', correlating the trough resulting on the surface with the convergence characterisitcs of the cavern. Among other applications, the method thus permits monitoring of caverns.

  17. Meteorological Uncertainty of atmospheric Dispersion model results (MUD)

    DEFF Research Database (Denmark)

    Havskov Sørensen, Jens; Amstrup, Bjarne; Feddersen, Henrik

    . However, recent developments in numerical weather prediction (NWP) include probabilistic forecasting techniques, which can be utilised also for atmospheric dispersion models. The ensemble statistical methods developed and applied to NWP models aim at describing the inherent uncertainties......The MUD project addresses assessment of uncertainties of atmospheric dispersion model predictions, as well as optimum presentation to decision makers. Previously, it has not been possible to estimate such uncertainties quantitatively, but merely to calculate the 'most likely' dispersion scenario...... of the meteorological model results. These uncertainties stem from e.g. limits in meteorological obser-vations used to initialise meteorological forecast series. By perturbing the initial state of an NWP model run in agreement with the available observa-tional data, an ensemble of meteorological forecasts is produced...

  18. Meteorological Uncertainty of atmospheric Dispersion model results (MUD)

    DEFF Research Database (Denmark)

    Havskov Sørensen, Jens; Amstrup, Bjarne; Feddersen, Henrik

    ’ dispersion scenario. However, recent developments in numerical weather prediction (NWP) include probabilistic forecasting techniques, which can be utilised also for long-range atmospheric dispersion models. The ensemble statistical methods developed and applied to NWP models aim at describing the inherent......The MUD project addresses assessment of uncertainties of atmospheric dispersion model predictions, as well as possibilities for optimum presentation to decision makers. Previously, it has not been possible to estimate such uncertainties quantitatively, but merely to calculate the ‘most likely...... uncertainties of the meteorological model results. These uncertainties stem from e.g. limits in meteorological observations used to initialise meteorological forecast series. By perturbing e.g. the initial state of an NWP model run in agreement with the available observational data, an ensemble...

  19. The 2013 European Seismic Hazard Model: key components and results

    OpenAIRE

    Jochen Woessner; Danciu Laurentiu; Domenico Giardini; Helen Crowley; Fabrice Cotton; G. Grünthal; Gianluca Valensise; Ronald Arvidsson; Roberto Basili; Mine Betül Demircioglu; Stefan Hiemer; Carlo Meletti; Roger W. Musson; Andrea N. Rovida; Karin Sesetyan

    2015-01-01

    The 2013 European Seismic Hazard Model (ESHM13) results from a community-based probabilistic seismic hazard assessment supported by the EU-FP7 project “Seismic Hazard Harmonization in Europe” (SHARE, 2009–2013). The ESHM13 is a consistent seismic hazard model for Europe and Turkey which overcomes the limitation of national borders and includes a through quantification of the uncertainties. It is the first completed regional effort contributing to the “Global Earthquake Model” initiative. It m...

  20. Hydroclimatology of the Nile: results from a regional climate model

    Directory of Open Access Journals (Sweden)

    Y. A. Mohamed

    2005-01-01

    Full Text Available This paper presents the result of the regional coupled climatic and hydrologic model of the Nile Basin. For the first time the interaction between the climatic processes and the hydrological processes on the land surface have been fully coupled. The hydrological model is driven by the rainfall and the energy available for evaporation generated in the climate model, and the runoff generated in the catchment is again routed over the wetlands of the Nile to supply moisture for atmospheric feedback. The results obtained are quite satisfactory given the extremely low runoff coefficients in the catchment. The paper presents the validation results over the sub-basins: Blue Nile, White Nile, Atbara river, the Sudd swamps, and the Main Nile for the period 1995 to 2000. Observational datasets were used to evaluate the model results including radiation, precipitation, runoff and evaporation data. The evaporation data were derived from satellite images over a major part of the Upper Nile. Limitations in both the observational data and the model are discussed. It is concluded that the model provides a sound representation of the regional water cycle over the Nile. The sources of atmospheric moisture to the basin, and location of convergence/divergence fields could be accurately illustrated. The model is used to describe the regional water cycle in the Nile basin in terms of atmospheric fluxes, land surface fluxes and land surface-climate feedbacks. The monthly moisture recycling ratio (i.e. locally generated/total precipitation over the Nile varies between 8 and 14%, with an annual mean of 11%, which implies that 89% of the Nile water resources originates from outside the basin physical boundaries. The monthly precipitation efficiency varies between 12 and 53%, and the annual mean is 28%. The mean annual result of the Nile regional water cycle is compared to that of the Amazon and the Mississippi basins.

  1. Results of a model for premixed combustion oscillations

    Energy Technology Data Exchange (ETDEWEB)

    Janus, M.C.; Richards, G.A.

    1996-09-01

    Combustion oscillations are receiving renewed research interest due to increasing use of lean premix (LPM) combustion to gas turbines. A simple, nonlinear model for premixed combustion is described in this paper. The model was developed to help explain specific experimental observations and to provide guidance for development of active control schemes based on nonlinear concepts. The model can be used to quickly examine instability trends associated with changes in equivalence ratio, mass flow rate, geometry, ambient conditions, etc. The model represents the relevant processes occurring in a fuel nozzle and combustor which are analogous to current LPM turbine combustors. Conservation equations for the fuel nozzle and combustor are developed from simple control volume analysis, providing a set of ordinary differential equations that can be solved on a personal computer. Combustion is modeled as a stirred reactor, with a bimolecular reaction rate between fuel and air. A variety of numerical results and comparisons to experimental data are presented to demonstrate the utility of the model. Model results are used to understand the fundamental mechanisms which drive combustion oscillations, effects of inlet air temperature and nozzle geometry on instability, and effectiveness of open loop control schemes.

  2. Summary of FY15 results of benchmark modeling activities

    Energy Technology Data Exchange (ETDEWEB)

    Arguello, J. Guadalupe [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    Sandia is participating in the third phase of an is a contributing partner to a U.S.-German "Joint Project" entitled "Comparison of current constitutive models and simulation procedures on the basis of model calculations of the thermo-mechanical behavior and healing of rock salt." The first goal of the project is to check the ability of numerical modeling tools to correctly describe the relevant deformation phenomena in rock salt under various influences. Achieving this goal will lead to increased confidence in the results of numerical simulations related to the secure storage of radioactive wastes in rock salt, thereby enhancing the acceptance of the results. These results may ultimately be used to make various assertions regarding both the stability analysis of an underground repository in salt, during the operating phase, and the long-term integrity of the geological barrier against the release of harmful substances into the biosphere, in the post-operating phase.

  3. Askew Positions—Schieflagen: Depictions of Children in German Terrorism Films

    Directory of Open Access Journals (Sweden)

    Maria Stehle

    2016-02-01

    Full Text Available This essay discusses the appearance of children in films that negotiate the legacies of West left-wing German and global terrorism. The four films discussed in this essay depict children in Schieflagen (askew positions, but use these images to create rather different political messages. InDeutschland im Herbst (1978, Die bleierene Zeit(1981 and Innere Sicherheit (2000, children are melodramatic devices that convey a sense of national tragedy, nostalgia for “innocence,” and/or a nationally coded sense of hope. As opposed to representing such an uncanny mixture between melodramatic victim and national symbol, children in the recent film collaborationDeutschland 09 (2009 are the face of the present. Deutschland 09 depicts children as disconnected from German history, which relieves them of the burden of national representation and, as a result, offers a potential for a less normative and more diverse perspective on Germany’s history and present. While their missing connection to national history leaves them to appear detached and confused, this confusion can be read as a search for different understandings of history and belonging in twenty-first century Germany.

  4. Vertebral artery loop formation depicted on oblique sagittal MR imaging: A case report

    Energy Technology Data Exchange (ETDEWEB)

    Bang, Sun Woo; Han, Kyung Ream; Lee, Mi Kyung; Kim, Hyung Nam; Han, Jae Il; Park, Mi Na; Kim, Chan [Kim Chan Hospital, Suwon (Korea, Republic of)

    2015-02-15

    Vertebral artery loop formation is an anatomic variation that possibly causes cervical nerve root compression, leading to cervical radiculopathy. A few cases of vertebral artery loop formation depicted with conventional sagittal magnetic resonance imaging (MRI) have been reported, but cases of vertebral artery loop formation depicted with oblique sagittal MRI have been less frequently reported. We present a case of vertebral artery loop formation depicted on oblique sagittal MRI.

  5. Vertebral artery loop formation depicted on oblique sagittal MR imaging: A case report

    International Nuclear Information System (INIS)

    Bang, Sun Woo; Han, Kyung Ream; Lee, Mi Kyung; Kim, Hyung Nam; Han, Jae Il; Park, Mi Na; Kim, Chan

    2015-01-01

    Vertebral artery loop formation is an anatomic variation that possibly causes cervical nerve root compression, leading to cervical radiculopathy. A few cases of vertebral artery loop formation depicted with conventional sagittal magnetic resonance imaging (MRI) have been reported, but cases of vertebral artery loop formation depicted with oblique sagittal MRI have been less frequently reported. We present a case of vertebral artery loop formation depicted on oblique sagittal MRI.

  6. Dvylikos Olimpo dievų vaizdavimas Enijaus Analuose. Depiction of twelve Olympian gods in Ennius’ Annales

    Directory of Open Access Journals (Sweden)

    Tomas Veteikis

    2008-01-01

    establish the most characteristical features of each in Ennian depiction and compare with the evidence of his / her contemporary cult and degree of syncretization.In the course of analysis, a somewhat parallel attempt is also made to verify Cicero’s message concerning Ennius’ belief in gods in general (Div. 1, 58. The analysis shows quite divergent result resting upon incomplete status of our sources: some gods are depicted as participants of human actions, some remain mere vague representatives of natural phenomena.The bulk of conclusions deals with national dependance, hierarchy and stylistic variation of Ennius’ dodekatheon. Material of this paper clearly indicates the national priority in Annales: the most honoured both statistically and virtually are the four ancestral Roman gods (di genitales – Juppiter, Juno, Venus and Mars. Each of them also appears in certain non-Roman context (Trojan, Greek, Carthaginian or Sabinian, where their Roman priority is not emphasized, unless their Latin name is taken into account. The latter fact combined with Ennian technics of Homer’s imitation and hellenistic erudition enables him to rewrite ancient history from the Roman point. This actually happens on the theological level when Roman state gods become continuators of variously reinterpreted homeric greco-trojan gods. Annals of Ennius thus attest the absorbtion of Greek Olympic pantheon into Roman state pantheon. Depiction of gods in the poem also has certain “expurgatory” mark, since very few traces of obscenity in gods’ portrayal are present (with exception of Mars, called homo pulcer with possibly euhemeric hint. On the other hand, the sublimity of Ennian gods is moderate: there are several indications of their humanly sensitive and not indifferent stance in their contacts with people (esp. Juno, Juppiter and Venus.A considerable group of Olympian gods in the current fragmentary shape of Annals remains not clearly presented: some produce no material for deeper

  7. Relationship Marketing results: proposition of a cognitive mapping model

    Directory of Open Access Journals (Sweden)

    Iná Futino Barreto

    2015-12-01

    Full Text Available Objective - This research sought to develop a cognitive model that expresses how marketing professionals understand the relationship between the constructs that define relationship marketing (RM. It also tried to understand, using the obtained model, how objectives in this field are achieved. Design/methodology/approach – Through cognitive mapping, we traced 35 individual mental maps, highlighting how each respondent understands the interactions between RM elements. Based on the views of these individuals, we established an aggregate mental map. Theoretical foundation – The topic is based on a literature review that explores the RM concept and its main elements. Based on this review, we listed eleven main constructs. Findings – We established an aggregate mental map that represents the RM structural model. Model analysis identified that CLV is understood as the final result of RM. We also observed that the impact of most of the RM elements on CLV is brokered by loyalty. Personalization and quality, on the other hand, proved to be process input elements, and are the ones that most strongly impact others. Finally, we highlight that elements that punish customers are much less effective than elements that benefit them. Contributions - The model was able to insert core elements of RM, but absent from most formal models: CLV and customization. The analysis allowed us to understand the interactions between the RM elements and how the end result of RM (CLV is formed. This understanding improves knowledge on the subject and helps guide, assess and correct actions.

  8. Marginal production in the Gulf of Mexico - II. Model results

    International Nuclear Information System (INIS)

    Kaiser, Mark J.; Yu, Yunke

    2010-01-01

    In the second part of this two-part article on marginal production in the Gulf of Mexico, we estimate the number of committed assets in water depth less than 1000 ft that are expected to be marginal over a 60-year time horizon. We compute the expected quantity and value of the production and gross revenue streams of the gulf's committed asset inventory circa. January 2007 using a probabilistic model framework. Cumulative hydrocarbon production from the producing inventory is estimated to be 1056 MMbbl oil and 13.3 Tcf gas. Marginal production from the committed asset inventory is expected to contribute 4.1% of total oil production and 5.4% of gas production. A meta-evaluation procedure is adapted to present the results of sensitivity analysis. Model results are discussed along with a description of the model framework and limitations of the analysis. (author)

  9. Marginal production in the Gulf of Mexico - II. Model results

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, Mark J.; Yu, Yunke [Center for Energy Studies, Louisiana State University, Baton Rouge, LA 70803 (United States)

    2010-08-15

    In the second part of this two-part article on marginal production in the Gulf of Mexico, we estimate the number of committed assets in water depth less than 1000 ft that are expected to be marginal over a 60-year time horizon. We compute the expected quantity and value of the production and gross revenue streams of the gulf's committed asset inventory circa. January 2007 using a probabilistic model framework. Cumulative hydrocarbon production from the producing inventory is estimated to be 1056 MMbbl oil and 13.3 Tcf gas. Marginal production from the committed asset inventory is expected to contribute 4.1% of total oil production and 5.4% of gas production. A meta-evaluation procedure is adapted to present the results of sensitivity analysis. Model results are discussed along with a description of the model framework and limitations of the analysis. (author)

  10. A prospective study to evaluate the depictability of the hepatic veins on abdominal contrast-enhanced CT in small children

    International Nuclear Information System (INIS)

    Nakagawa, Motoo; Hara, Masaki; Shibamoto, Yuta

    2009-01-01

    The optimal conditions for abdominal contrast-enhanced (CE) CT, especially with respect to depiction of the hepatic veins (HVs), have not been well studied in small children. We compared the depiction of the HVs in small children using scan delay times of 50 s and 60 s and a power injector. The degree of contrast enhancement of the HVs according to body weight was also evaluated. A total of 50 CT studies in 31 children ages 2 days to 3 years 4 months (median 12 months) with a body weight less than 15 kg were prospectively evaluated. Nonionic contrast medium (300 mgI/ml) at a dose of 2 ml/kg and an injection rate calculated as (body weight in kilograms x 0.1) ml/s was injected through a 24-gauge intravenous catheter. Scan delay time was randomly chosen at 50 s or 60 s (25 times each). Subjective assessment of HV depiction was performed and the difference in CT number between the HV and hepatic parenchyma (HV-HP value) was calculated. In all cases, subjective assessment of HV depiction was good and the HV-HP value was greater than 20 HU. The mean±SD HV-HP value was 47.7±13.2 HU. There were no differences in the mean HV-HP values between scan delay times of 50 s and 60 s (P=0.58). For small children, this protocol for pediatric abdominal CECT resulted in good depiction of the HVs with no difference between scan delay times of 50 s and 60 s. (orig.)

  11. Modeling Results For the ITER Cryogenic Fore Pump. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Pfotenhauer, John M. [University of Wisconsin, Madison, WI (United States); Zhang, Dongsheng [University of Wisconsin, Madison, WI (United States)

    2014-03-31

    A numerical model characterizing the operation of a cryogenic fore-pump (CFP) for ITER has been developed at the University of Wisconsin – Madison during the period from March 15, 2011 through June 30, 2014. The purpose of the ITER-CFP is to separate hydrogen isotopes from helium gas, both making up the exhaust components from the ITER reactor. The model explicitly determines the amount of hydrogen that is captured by the supercritical-helium-cooled pump as a function of the inlet temperature of the supercritical helium, its flow rate, and the inlet conditions of the hydrogen gas flow. Furthermore the model computes the location and amount of hydrogen captured in the pump as a function of time. Throughout the model’s development, and as a calibration check for its results, it has been extensively compared with the measurements of a CFP prototype tested at Oak Ridge National Lab. The results of the model demonstrate that the quantity of captured hydrogen is very sensitive to the inlet temperature of the helium coolant on the outside of the cryopump. Furthermore, the model can be utilized to refine those tests, and suggests methods that could be incorporated in the testing to enhance the usefulness of the measured data.

  12. Fuel assembly bow: analytical modeling and resulting design improvements

    International Nuclear Information System (INIS)

    Stabel, J.; Huebsch, H.P.

    1995-01-01

    The bowing of fuel assemblies may result in a contact between neighbouring fuel assemblies and in connection with a vibration to a resulting wear or even perforation at the corners of the spacer grids of neighbouring assemblies. Such events allowed reinsertion of a few fuel assemblies in Germany only after spacer repair. In order to identify the most sensitive parameters causing the observed bowing of fuel assemblies a new computer model was develop which takes into a account the highly nonlinear behaviour of the interaction between fuel rods and spacers. As a result of the studies performed with this model, design improvements such as a more rigid connection between guide thimbles and spacer grids, could be defined. First experiences with this improved design show significantly better fuel behaviour. (author). 5 figs., 1 tabs

  13. Methodology and Results of Mathematical Modelling of Complex Technological Processes

    Science.gov (United States)

    Mokrova, Nataliya V.

    2018-03-01

    The methodology of system analysis allows us to draw a mathematical model of the complex technological process. The mathematical description of the plasma-chemical process was proposed. The importance the quenching rate and initial temperature decrease time was confirmed for producing the maximum amount of the target product. The results of numerical integration of the system of differential equations can be used to describe reagent concentrations, plasma jet rate and temperature in order to achieve optimal mode of hardening. Such models are applicable both for solving control problems and predicting future states of sophisticated technological systems.

  14. Modeling vertical loads in pools resulting from fluid injection. [BWR

    Energy Technology Data Exchange (ETDEWEB)

    Lai, W.; McCauley, E.W.

    1978-06-15

    Table-top model experiments were performed to investigate pressure suppression pool dynamics effects due to a postulated loss-of-coolant accident (LOCA) for the Peachbottom Mark I boiling water reactor containment system. The results guided subsequent conduct of experiments in the /sup 1///sub 5/-scale facility and provided new insight into the vertical load function (VLF). Model experiments show an oscillatory VLF with the download typically double-spiked followed by a more gradual sinusoidal upload. The load function contains a high frequency oscillation superimposed on a low frequency one; evidence from measurements indicates that the oscillations are initiated by fluid dynamics phenomena.

  15. Modeling vertical loads in pools resulting from fluid injection

    International Nuclear Information System (INIS)

    Lai, W.; McCauley, E.W.

    1978-01-01

    Table-top model experiments were performed to investigate pressure suppression pool dynamics effects due to a postulated loss-of-coolant accident (LOCA) for the Peachbottom Mark I boiling water reactor containment system. The results guided subsequent conduct of experiments in the 1 / 5 -scale facility and provided new insight into the vertical load function (VLF). Model experiments show an oscillatory VLF with the download typically double-spiked followed by a more gradual sinusoidal upload. The load function contains a high frequency oscillation superimposed on a low frequency one; evidence from measurements indicates that the oscillations are initiated by fluid dynamics phenomena

  16. Some results on the dynamics generated by the Bazykin model

    Directory of Open Access Journals (Sweden)

    Georgescu, R M

    2006-07-01

    Full Text Available A predator-prey model formerly proposed by A. Bazykin et al. [Bifurcation diagrams of planar dynamical systems (1985] is analyzed in the case when two of the four parameters are kept fixed. Dynamics and bifurcation results are deduced by using the methods developed by D. K. Arrowsmith and C. M. Place [Ordinary differential equations (1982], S.-N. Chow et al. [Normal forms and bifurcation of planar fields (1994], Y. A. Kuznetsov [Elements of applied bifurcation theory (1998], and A. Georgescu [Dynamic bifurcation diagrams for some models in economics and biology (2004]. The global dynamic bifurcation diagram is constructed and graphically represented. The biological interpretation is presented, too.

  17. Results of the eruptive column model inter-comparison study

    Science.gov (United States)

    Costa, Antonio; Suzuki, Yujiro; Cerminara, M.; Devenish, Ben J.; Esposti Ongaro, T.; Herzog, Michael; Van Eaton, Alexa; Denby, L.C.; Bursik, Marcus; de' Michieli Vitturi, Mattia; Engwell, S.; Neri, Augusto; Barsotti, Sara; Folch, Arnau; Macedonio, Giovanni; Girault, F.; Carazzo, G.; Tait, S.; Kaminski, E.; Mastin, Larry G.; Woodhouse, Mark J.; Phillips, Jeremy C.; Hogg, Andrew J.; Degruyter, Wim; Bonadonna, Costanza

    2016-01-01

    This study compares and evaluates one-dimensional (1D) and three-dimensional (3D) numerical models of volcanic eruption columns in a set of different inter-comparison exercises. The exercises were designed as a blind test in which a set of common input parameters was given for two reference eruptions, representing a strong and a weak eruption column under different meteorological conditions. Comparing the results of the different models allows us to evaluate their capabilities and target areas for future improvement. Despite their different formulations, the 1D and 3D models provide reasonably consistent predictions of some of the key global descriptors of the volcanic plumes. Variability in plume height, estimated from the standard deviation of model predictions, is within ~ 20% for the weak plume and ~ 10% for the strong plume. Predictions of neutral buoyancy level are also in reasonably good agreement among the different models, with a standard deviation ranging from 9 to 19% (the latter for the weak plume in a windy atmosphere). Overall, these discrepancies are in the range of observational uncertainty of column height. However, there are important differences amongst models in terms of local properties along the plume axis, particularly for the strong plume. Our analysis suggests that the simplified treatment of entrainment in 1D models is adequate to resolve the general behaviour of the weak plume. However, it is inadequate to capture complex features of the strong plume, such as large vortices, partial column collapse, or gravitational fountaining that strongly enhance entrainment in the lower atmosphere. We conclude that there is a need to more accurately quantify entrainment rates, improve the representation of plume radius, and incorporate the effects of column instability in future versions of 1D volcanic plume models.

  18. Initial CGE Model Results Summary Exogenous and Endogenous Variables Tests

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, Brian Keith [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Boero, Riccardo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rivera, Michael Kelly [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-08-07

    The following discussion presents initial results of tests of the most recent version of the National Infrastructure Simulation and Analysis Center Dynamic Computable General Equilibrium (CGE) model developed by Los Alamos National Laboratory (LANL). The intent of this is to test and assess the model’s behavioral properties. The test evaluated whether the predicted impacts are reasonable from a qualitative perspective. This issue is whether the predicted change, be it an increase or decrease in other model variables, is consistent with prior economic intuition and expectations about the predicted change. One of the purposes of this effort is to determine whether model changes are needed in order to improve its behavior qualitatively and quantitatively.

  19. Interaction between subducting plates: results from numerical and analogue modeling

    Science.gov (United States)

    Kiraly, Agnes; Capitanio, Fabio A.; Funiciello, Francesca; Faccenna, Claudio

    2016-04-01

    The tectonic setting of the Alpine-Mediterranean area is achieved during the late Cenozoic subduction, collision and suturing of several oceanic fragments and continental blocks. In this stage, processes such as interactions among subducting slabs, slab migrations and related mantle flow played a relevant role on the resulting tectonics. Here, we use numerical models to first address the mantle flow characteristic in 3D. During the subduction of a single plate the strength of the return flow strongly depends on the slab pull force, that is on the plate's buoyancy, however the physical properties of the slab, such as density, viscosity or width, do not affect largely the morphology of the toroidal cell. Instead, dramatic effects on the geometry and the dynamics of the toroidal cell result in models where the thickness of the mantle is varied. The vertical component of the vorticity vector is used to define the characteristic size of the toroidal cell, which is ~1.2-1.3 times the mantle depth. This latter defines the range of viscous stress propagation through the mantle and consequent interactions with other slabs. We thus further investigate on this setup where two separate lithospheric plates subduct in opposite sense, developing opposite polarities and convergent slab retreat, and model different initial sideways distance between the plates. The stress profiles in time illustrate that the plates interacts when slabs are at the characteristic distance and the two slabs toroidal cells merge. Increased stress and delayed slab migrations are the results. Analogue models of double-sided subduction show similar maximum distance and allow testing the additional role of stress propagated through the plates. We use a silicon plate subducting on its two opposite margins, which is either homogeneous or comprises oceanic and continental lithospheres, differing in buoyancy. The modeling results show that the double-sided subduction is strongly affected by changes in plate

  20. First experiments results about the engineering model of Rapsodie

    International Nuclear Information System (INIS)

    Chalot, A.; Ginier, R.; Sauvage, M.

    1964-01-01

    This report deals with the first series of experiments carried out on the engineering model of Rapsodie and on an associated sodium facility set in a laboratory hall of Cadarache. It conveys more precisely: 1/ - The difficulties encountered during the erection and assembly of the engineering model and a compilation of the results of the first series of experiments and tests carried out on this installation (loading of the subassemblies preheating, thermal chocks...). 2/ - The experiments and tests carried out on the two prototypes control rod drive mechanisms which brought to the choice for the design of the definitive drive mechanism. As a whole, the results proved the validity of the general design principles adopted for Rapsodie. (authors) [fr

  1. Workshop to transfer VELMA watershed model results to ...

    Science.gov (United States)

    An EPA Western Ecology Division (WED) watershed modeling team has been working with the Snoqualmie Tribe Environmental and Natural Resources Department to develop VELMA watershed model simulations of the effects of historical and future restoration and land use practices on streamflow, stream temperature, and other habitat characteristics affecting threatened salmon populations in the 100 square mile Tolt River watershed in Washington state. To date, the WED group has fully calibrated the watershed model to simulate Tolt River flows with a high degree of accuracy under current and historical conditions and practices, and is in the process of simulating long-term responses to specific watershed restoration practices conducted by the Snoqualmie Tribe and partners. On July 20-21 WED Researchers Bob McKane, Allen Brookes and ORISE Fellow Jonathan Halama will be attending a workshop at the Tolt River site in Carnation, WA, to present and discuss modeling results with the Snoqualmie Tribe and other Tolt River watershed stakeholders and land managers, including the Washington Departments of Ecology and Natural Resources, U.S. Forest Service, City of Seattle, King County, and representatives of the Northwest Indian Fisheries Commission. The workshop is being co-organized by the Snoqualmie Tribe, EPA Region 10 and WED. The purpose of this 2-day workshop is two-fold. First, on Day 1, the modeling team will perform its second site visit to the watershed, this time focus

  2. Meteorological uncertainty of atmospheric dispersion model results (MUD)

    International Nuclear Information System (INIS)

    Havskov Soerensen, J.; Amstrup, B.; Feddersen, H.

    2013-08-01

    The MUD project addresses assessment of uncertainties of atmospheric dispersion model predictions, as well as possibilities for optimum presentation to decision makers. Previously, it has not been possible to estimate such uncertainties quantitatively, but merely to calculate the 'most likely' dispersion scenario. However, recent developments in numerical weather prediction (NWP) include probabilistic forecasting techniques, which can be utilised also for long-range atmospheric dispersion models. The ensemble statistical methods developed and applied to NWP models aim at describing the inherent uncertainties of the meteorological model results. These uncertainties stem from e.g. limits in meteorological observations used to initialise meteorological forecast series. By perturbing e.g. the initial state of an NWP model run in agreement with the available observational data, an ensemble of meteorological forecasts is produced from which uncertainties in the various meteorological parameters are estimated, e.g. probabilities for rain. Corresponding ensembles of atmospheric dispersion can now be computed from which uncertainties of predicted radionuclide concentration and deposition patterns can be derived. (Author)

  3. Some results on hyperscaling in the 3D Ising model

    Energy Technology Data Exchange (ETDEWEB)

    Baker, G.A. Jr. [Los Alamos National Lab., NM (United States). Theoretical Div.; Kawashima, Naoki [Univ. of Tokyo (Japan). Dept. of Physics

    1995-09-01

    The authors review exact studies on finite-sized 2 dimensional Ising models and show that the point for an infinite-sized model at the critical temperature is a point of nonuniform approach in the temperature-size plane. They also illuminate some strong effects of finite-size on quantities which do not diverge at the critical point. They then review Monte Carlo studies for 3 dimensional Ising models of various sizes (L = 2--100) at various temperatures. From these results they find that the data for the renormalized coupling constant collapses nicely when plotted against the correlation length, determined in a system of edge length L, divided by L. They also find that {zeta}{sub L}/L {ge} 0.26 is definitely too large for reliable studies of the critical value, g*, of the renormalized coupling constant. They have reasonable evidence that {zeta}{sub L}/L {approx} 0.1 is adequate for results that are within one percent of those for the infinite system size. On this basis, they have conducted a series of Monte Carlo calculations with this condition imposed. These calculations were made practical by the development of improved estimators for use in the Swendsen-Wang cluster method. The authors found from these results, coupled with a reversed limit computation (size increases with the temperature fixed at the critical temperature), that g* > 0, although there may well be a sharp downward drop in g as the critical temperature is approached in accord with the predictions of series analysis. The results support the validity of hyperscaling in the 3 dimensional Ising model.

  4. Presenting results of software model checker via debugging interface

    OpenAIRE

    Kohan, Tomáš

    2012-01-01

    Title: Presenting results of software model checker via debugging interface Author: Tomáš Kohan Department: Department of Software Engineering Supervisor of the master thesis: RNDr. Ondřej Šerý, Ph.D., Department of Distributed and Dependable Systems Abstract: This thesis is devoted to design and implementation of the new debugging interface of the Java PathFinder application. As a suitable inte- face container was selected the Eclipse development environment. The created interface should vis...

  5. Review of Current Standard Model Results in ATLAS

    CERN Document Server

    Brandt, Gerhard; The ATLAS collaboration

    2018-01-01

    This talk highlights results selected from the Standard Model research programme of the ATLAS Collaboration at the Large Hadron Collider. Results using data from $p-p$ collisions at $\\sqrt{s}=7,8$~TeV in LHC Run-1 as well as results using data at $\\sqrt{s}=13$~TeV in LHC Run-2 are covered. The status of cross section measurements from soft QCD processes and jet production as well as photon production are presented. The presentation extends to vector boson production with associated jets. Precision measurements of the production of $W$ and $Z$ bosons, including a first measurement of the mass of the $W$ bosons, $m_W$, are discussed. The programme to measure electroweak processes with di-boson and tri-boson final states is outlined. All presented measurements are compatible with Standard Model descriptions and allow to further constrain it. In addition they allow to probe new physics which would manifest through extra gauge couplings, or Standard Model gauge couplings deviating from their predicted value.

  6. Big Breasts and Bad Guys: Depictions of Gender and Race in Video Games

    Science.gov (United States)

    Dickerman, Charles; Christensen, Jeff; Kerl-McClain, Stella Beatriz

    2008-01-01

    Video games have become a powerful force in the culture. Depictions of women in video games are scarce and highly stereotypical. Women are usually minor characters, are seen as victims rather than heroines, and are depicted in highly sexualized ways. Whereas early games had only a few representations of people of color, people of color were often…

  7. Challenges in validating model results for first year ice

    Science.gov (United States)

    Melsom, Arne; Eastwood, Steinar; Xie, Jiping; Aaboe, Signe; Bertino, Laurent

    2017-04-01

    In order to assess the quality of model results for the distribution of first year ice, a comparison with a product based on observations from satellite-borne instruments has been performed. Such a comparison is not straightforward due to the contrasting algorithms that are used in the model product and the remote sensing product. The implementation of the validation is discussed in light of the differences between this set of products, and validation results are presented. The model product is the daily updated 10-day forecast from the Arctic Monitoring and Forecasting Centre in CMEMS. The forecasts are produced with the assimilative ocean prediction system TOPAZ. Presently, observations of sea ice concentration and sea ice drift are introduced in the assimilation step, but data for sea ice thickness and ice age (or roughness) are not included. The model computes the age of the ice by recording and updating the time passed after ice formation as sea ice grows and deteriorates as it is advected inside the model domain. Ice that is younger than 365 days is classified as first year ice. The fraction of first-year ice is recorded as a tracer in each grid cell. The Ocean and Sea Ice Thematic Assembly Centre in CMEMS redistributes a daily product from the EUMETSAT OSI SAF of gridded sea ice conditions which include "ice type", a representation of the separation of regions between those infested by first year ice, and those infested by multi-year ice. The ice type is parameterized based on data for the gradient ratio GR(19,37) from SSMIS observations, and from the ASCAT backscatter parameter. This product also includes information on ambiguity in the processing of the remote sensing data, and the product's confidence level, which have a strong seasonal dependency.

  8. Thermal-Chemical Model Of Subduction: Results And Tests

    Science.gov (United States)

    Gorczyk, W.; Gerya, T. V.; Connolly, J. A.; Yuen, D. A.; Rudolph, M.

    2005-12-01

    Seismic structures with strong positive and negative velocity anomalies in the mantle wedge above subduction zones have been interpreted as thermally and/or chemically induced phenomena. We have developed a thermal-chemical model of subduction, which constrains the dynamics of seismic velocity structure beneath volcanic arcs. Our simulations have been calculated over a finite-difference grid with (201×101) to (201×401) regularly spaced Eulerian points, using 0.5 million to 10 billion markers. The model couples numerical thermo-mechanical solution with Gibbs energy minimization to investigate the dynamic behavior of partially molten upwellings from slabs (cold plumes) and structures associated with their development. The model demonstrates two chemically distinct types of plumes (mixed and unmixed), and various rigid body rotation phenomena in the wedge (subduction wheel, fore-arc spin, wedge pin-ball). These thermal-chemical features strongly perturb seismic structure. Their occurrence is dependent on the age of subducting slab and the rate of subduction.The model has been validated through a series of test cases and its results are consistent with a variety of geological and geophysical data. In contrast to models that attribute a purely thermal origin for mantle wedge seismic anomalies, the thermal-chemical model is able to simulate the strong variations of seismic velocity existing beneath volcanic arcs which are associated with development of cold plumes. In particular, molten regions that form beneath volcanic arcs as a consequence of vigorous cold wet plumes are manifest by > 20% variations in the local Poisson ratio, as compared to variations of ~ 2% expected as a consequence of temperature variation within the mantle wedge.

  9. Contrast enema depiction of small-bowel volvulus in complicated neonatal bowel obstruction

    International Nuclear Information System (INIS)

    Navarro, Oscar M.; Daneman, Alan; Miller, Stephen F.

    2004-01-01

    About one-half of patients with meconium ileus (MI) present with a complication such as volvulus, atresia, meconium peritonitis or giant cystic meconium peritonitis. The treatment of these complications requires surgery. However, the preoperative diagnosis of complicated MI is difficult. We describe two neonates with complicated small-bowel obstruction, one with MI related to cystic fibrosis and the other not related to cystic fibrosis. In both, contrast enema depicted a spiral appearance of the distal small bowel, which at surgery proved to be the result of volvulus associated with antenatal bowel perforation. This appearance of the small bowel on contrast enema in this clinical setting has not been previously described. The recognition of this spiral appearance of the distal small bowel suggests the need for surgery. (orig.)

  10. Contrast enema depiction of small-bowel volvulus in complicated neonatal bowel obstruction

    Energy Technology Data Exchange (ETDEWEB)

    Navarro, Oscar M.; Daneman, Alan; Miller, Stephen F. [Hospital for Sick Children, Department of Diagnostic Imaging, Toronto, ON (Canada)

    2004-12-01

    About one-half of patients with meconium ileus (MI) present with a complication such as volvulus, atresia, meconium peritonitis or giant cystic meconium peritonitis. The treatment of these complications requires surgery. However, the preoperative diagnosis of complicated MI is difficult. We describe two neonates with complicated small-bowel obstruction, one with MI related to cystic fibrosis and the other not related to cystic fibrosis. In both, contrast enema depicted a spiral appearance of the distal small bowel, which at surgery proved to be the result of volvulus associated with antenatal bowel perforation. This appearance of the small bowel on contrast enema in this clinical setting has not been previously described. The recognition of this spiral appearance of the distal small bowel suggests the need for surgery. (orig.)

  11. A Snapshot of the Depiction of Electronic Cigarettes in YouTube Videos.

    Science.gov (United States)

    Romito, Laura M; Hurwich, Risa A; Eckert, George J

    2015-11-01

    To assess the depiction of e-cigarettes in YouTube videos. The sample (N = 63) was selected from the top 20 search results for "electronic cigarette," and "e-cig" with each term searched twice by the filters "Relevance" and "View Count." Data collected included title, length, number of views, "likes," "dislikes," comments, and inferred demographics of individuals appearing in the videos. Seventy-six percent of videos included at least one man, 62% included a Caucasian, and 50% included at least one young individual. Video content connotation was coded as positive (76%), neutral (18%), or negative (6%). Videos were categorized as advertisement (33%), instructional (17%), news clip (19%), product review (13%), entertainment (11%), public health (3%), and personal testimonial (3%). Most e-cigarette YouTube videos are non-traditional or covert advertisements featuring young Caucasian men.

  12. Measurement model choice influenced randomized controlled trial results.

    Science.gov (United States)

    Gorter, Rosalie; Fox, Jean-Paul; Apeldoorn, Adri; Twisk, Jos

    2016-11-01

    In randomized controlled trials (RCTs), outcome variables are often patient-reported outcomes measured with questionnaires. Ideally, all available item information is used for score construction, which requires an item response theory (IRT) measurement model. However, in practice, the classical test theory measurement model (sum scores) is mostly used, and differences between response patterns leading to the same sum score are ignored. The enhanced differentiation between scores with IRT enables more precise estimation of individual trajectories over time and group effects. The objective of this study was to show the advantages of using IRT scores instead of sum scores when analyzing RCTs. Two studies are presented, a real-life RCT, and a simulation study. Both IRT and sum scores are used to measure the construct and are subsequently used as outcomes for effect calculation. The bias in RCT results is conditional on the measurement model that was used to construct the scores. A bias in estimated trend of around one standard deviation was found when sum scores were used, where IRT showed negligible bias. Accurate statistical inferences are made from an RCT study when using IRT to estimate construct measurements. The use of sum scores leads to incorrect RCT results. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. Loss of spent fuel pool cooling PRA: Model and results

    Energy Technology Data Exchange (ETDEWEB)

    Siu, N.; Khericha, S.; Conroy, S.; Beck, S.; Blackman, H.

    1996-09-01

    This letter report documents models for quantifying the likelihood of loss of spent fuel pool cooling; models for identifying post-boiling scenarios that lead to core damage; qualitative and quantitative results generated for a selected plant that account for plant design and operational practices; a comparison of these results and those generated from earlier studies; and a review of available data on spent fuel pool accidents. The results of this study show that for a representative two-unit boiling water reactor, the annual probability of spent fuel pool boiling is 5 {times} 10{sup {minus}5} and the annual probability of flooding associated with loss of spent fuel pool cooling scenarios is 1 {times} 10{sup {minus}3}. Qualitative arguments are provided to show that the likelihood of core damage due to spent fuel pool boiling accidents is low for most US commercial nuclear power plants. It is also shown that, depending on the design characteristics of a given plant, the likelihood of either: (a) core damage due to spent fuel pool-associated flooding, or (b) spent fuel damage due to pool dryout, may not be negligible.

  14. SR-Site groundwater flow modelling methodology, setup and results

    Energy Technology Data Exchange (ETDEWEB)

    Selroos, Jan-Olof (Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)); Follin, Sven (SF GeoLogic AB, Taeby (Sweden))

    2010-12-15

    As a part of the license application for a final repository for spent nuclear fuel at Forsmark, the Swedish Nuclear Fuel and Waste Management Company (SKB) has undertaken three groundwater flow modelling studies. These are performed within the SR-Site project and represent time periods with different climate conditions. The simulations carried out contribute to the overall evaluation of the repository design and long-term radiological safety. Three time periods are addressed; the Excavation and operational phases, the Initial period of temperate climate after closure, and the Remaining part of the reference glacial cycle. The present report is a synthesis of the background reports describing the modelling methodology, setup, and results. It is the primary reference for the conclusions drawn in a SR-Site specific context concerning groundwater flow during the three climate periods. These conclusions are not necessarily provided explicitly in the background reports, but are based on the results provided in these reports. The main results and comparisons presented in the present report are summarised in the SR-Site Main report.

  15. Loss of spent fuel pool cooling PRA: Model and results

    International Nuclear Information System (INIS)

    Siu, N.; Khericha, S.; Conroy, S.; Beck, S.; Blackman, H.

    1996-09-01

    This letter report documents models for quantifying the likelihood of loss of spent fuel pool cooling; models for identifying post-boiling scenarios that lead to core damage; qualitative and quantitative results generated for a selected plant that account for plant design and operational practices; a comparison of these results and those generated from earlier studies; and a review of available data on spent fuel pool accidents. The results of this study show that for a representative two-unit boiling water reactor, the annual probability of spent fuel pool boiling is 5 x 10 -5 and the annual probability of flooding associated with loss of spent fuel pool cooling scenarios is 1 x 10 -3 . Qualitative arguments are provided to show that the likelihood of core damage due to spent fuel pool boiling accidents is low for most US commercial nuclear power plants. It is also shown that, depending on the design characteristics of a given plant, the likelihood of either: (a) core damage due to spent fuel pool-associated flooding, or (b) spent fuel damage due to pool dryout, may not be negligible

  16. Results of the benchmark for blade structural models, part A

    DEFF Research Database (Denmark)

    Lekou, D.J.; Chortis, D.; Belen Fariñas, A.

    2013-01-01

    Task 2.2 of the InnWind.Eu project. The benchmark is based on the reference wind turbine and the reference blade provided by DTU [1]. "Structural Concept developers/modelers" of WP2 were provided with the necessary input for a comparison numerical simulation run, upon definition of the reference blade......A benchmark on structural design methods for blades was performed within the InnWind.Eu project under WP2 “Lightweight Rotor” Task 2.2 “Lightweight structural design”. The present document is describes the results of the comparison simulation runs that were performed by the partners involved within...

  17. Preliminary results of steel containment vessel model test

    International Nuclear Information System (INIS)

    Matsumoto, T.; Komine, K.; Arai, S.

    1997-01-01

    A high pressure test of a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of a steel containment vessel (SCV), representing an improved boiling water reactor (BWR) Mark II containment, was conducted on December 11-12, 1996 at Sandia National Laboratories. This paper describes the preliminary results of the high pressure test. In addition, the preliminary post-test measurement data and the preliminary comparison of test data with pretest analysis predictions are also presented

  18. Depiction of experimental findings for a cloud enterprise architecture

    CSIR Research Space (South Africa)

    Mvelase, PS

    2015-12-01

    Full Text Available Research and commercial efforts are currently addressing challenges and providing solutions in cloud computing. Business models are emerging to address different use scenarios of cloud computing. In this paper, we present a virtual enterprise (VE...

  19. Evaluating metropolitan spatial development: a method for identifying settlement types and depicting growth patterns

    Directory of Open Access Journals (Sweden)

    Mehdi Pourpeikari Heris

    2017-01-01

    Full Text Available This research developed a method to explore density and growth rates in the 50 largest metropolitan areas in the United States. The outcomes of this method enable planners to understand the growth pattern of a region and compare it with other regions in the country. The main objectives of this research were: (1 to identify settlement types (high, medium and low density, suburbs, and urban fringes in each metropolitan area; (2 to depict and compare general metropolitan structures across the nation; and (3 to evaluate the location of recently developed dwellings in relation to settlement types and structures and estimate growth trends. The paper combined the percentage of impervious surface raster dataset (30-m cell size produced by the US Geological Survey (USGS and block-level housing unit data produced by the Census Bureau to map housing density across the lower 48 states in 2000 and 2010. Neighbourhood density profiles were used to identify the settlement types (high, medium and low density, suburbs, and urban fringes. The paper then compared density-decay functions of 50 metropolitan areas to depict urban growth patterns and to quantify the number of housing units developed in each settlement type. This method effectively distinguishes regions with higher densification (infill development rates versus regions with high-paced sprawl. The results showed that Los Angeles, New York and San Francisco metropolitan areas had high percentages of housing units developed in high-density areas between 2000 and 2010, while during the same period Birmingham, Nashville and Charlotte had high percentages of housing development in areas identified as suburbs.

  20. Impact Flash Physics: Modeling and Comparisons With Experimental Results

    Science.gov (United States)

    Rainey, E.; Stickle, A. M.; Ernst, C. M.; Schultz, P. H.; Mehta, N. L.; Brown, R. C.; Swaminathan, P. K.; Michaelis, C. H.; Erlandson, R. E.

    2015-12-01

    horizontal. High-speed radiometer measurements were made of the time-dependent impact flash at wavelengths of 350-1100 nm. We will present comparisons between these measurements and the output of APL's model. The results of this validation allow us to determine basic relationships between observed optical signatures and impact conditions.

  1. Portrayals in Print: Media Depictions of the Informal Sector’s Involvement in Managing E-Waste in India

    Directory of Open Access Journals (Sweden)

    Verena Radulovic

    2018-03-01

    Full Text Available For over a decade, media stories have exposed health and environmental harm caused by informal electronics recycling in less industrialized countries. Greater awareness of these risks helped inform regulations across the globe and the development of recycling standards. Yet, media depictions also shape public perceptions of informal workers and their role in handling electronic waste, or e-waste. This paper examines how mainstream print media describes the informal sector’s involvement in handling e-waste in India, especially as policymakers and other stakeholders currently grapple with how to integrate informal workers into formal, more transparent e-waste management schemes. This study evaluates depictions of the informal sector in print articles from both non-Indian and Indian news media outlets, employing controversy mapping principles and digital research tools. Findings may help inform stakeholder agendas seeking to influence public awareness on how to integrate informal workers into viable e-waste management solutions. Subsequent research based on these results could also help stakeholders understand the actors and networks that shape such media depictions. Results from the dataset show that most news articles describe informal workers negatively or problematically due to activities causing health risks and environmental damage, but usually do not discern which activities in the value chain (e.g., collection, dismantling, metals extraction represent the greatest risks. Comparatively fewer articles portray informal workers positively or as contributing to e-waste solutions. Most articles also do not explain challenges that arise when working with informal workers. As such, media depictions today often lag behind policy debates and obscure multiple facets—good and bad—of the informal sector’s involvement in managing e-waste. Thus, an opportunity exists for policymakers, manufacturers, and advocacy groups to bridge the gap between

  2. Depicting and Researching Disciplines: Strong and Moderate Essentialist Approaches

    Science.gov (United States)

    Trowler, Paul

    2014-01-01

    This paper considers how the idea of "discipline" can best be conceptualised, both in general and particular terms. Much previous research has employed a strong essentialist approach, a model of disciplines which exaggerates the homogeneity of specific disciplinary features and accords disciplines generative powers which they rarely…

  3. Position-sensitive transition edge sensor modeling and results

    Energy Technology Data Exchange (ETDEWEB)

    Hammock, Christina E-mail: chammock@milkyway.gsfc.nasa.gov; Figueroa-Feliciano, Enectali; Apodaca, Emmanuel; Bandler, Simon; Boyce, Kevin; Chervenak, Jay; Finkbeiner, Fred; Kelley, Richard; Lindeman, Mark; Porter, Scott; Saab, Tarek; Stahle, Caroline

    2004-03-11

    We report the latest design and experimental results for a Position-Sensitive Transition-Edge Sensor (PoST). The PoST is motivated by the desire to achieve a larger field-of-view without increasing the number of readout channels. A PoST consists of a one-dimensional array of X-ray absorbers connected on each end to a Transition Edge Sensor (TES). Position differentiation is achieved through a comparison of pulses between the two TESs and X-ray energy is inferred from a sum of the two signals. Optimizing such a device involves studying the available parameter space which includes device properties such as heat capacity and thermal conductivity as well as TES read-out circuitry parameters. We present results for different regimes of operation and the effects on energy resolution, throughput, and position differentiation. Results and implications from a non-linear model developed to study the saturation effects unique to PoSTs are also presented.

  4. Comparison of blade-strike modeling results with empirical data

    Energy Technology Data Exchange (ETDEWEB)

    Ploskey, Gene R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, Thomas J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2004-03-01

    This study is the initial stage of further investigation into the dynamics of injury to fish during passage through a turbine runner. As part of the study, Pacific Northwest National Laboratory (PNNL) estimated the probability of blade strike, and associated injury, as a function of fish length and turbine operating geometry at two adjacent turbines in Powerhouse 1 of Bonneville Dam. Units 5 and 6 had identical intakes, stay vanes, wicket gates, and draft tubes, but Unit 6 had a new runner and curved discharge ring to minimize gaps between the runner hub and blades and between the blade tips and discharge ring. We used a mathematical model to predict blade strike associated with two Kaplan turbines and compared results with empirical data from biological tests conducted in 1999 and 2000. Blade-strike models take into consideration the geometry of the turbine blades and discharges as well as fish length, orientation, and distribution along the runner. The first phase of this study included a sensitivity analysis to consider the effects of difference in geometry and operations between families of turbines on the strike probability response surface. The analysis revealed that the orientation of fish relative to the leading edge of a runner blade and the location that fish pass along the blade between the hub and blade tip are critical uncertainties in blade-strike models. Over a range of discharges, the average prediction of injury from blade strike was two to five times higher than average empirical estimates of visible injury from shear and mechanical devices. Empirical estimates of mortality may be better metrics for comparison to predicted injury rates than other injury measures for fish passing at mid-blade and blade-tip locations.

  5. Sexually explicit racialised media targeting men who have sex with men online: a content analysis of high-risk behaviour depicted in online advertisements.

    Science.gov (United States)

    White, Jaclyn M; Dunham, Emilia; Rowley, Blake; Reisner, Sari L; Mimiaga, Matthew J

    2015-01-01

    Sexually explicit media may perpetuate racial and sexual norms among men who have sex with men. While men may be exposed to sexually explicit media in the online settings where they seek sex with other men, no studies to our knowledge have explored the relationship between the racial and sexual content of advertisements appearing in these spaces. In 2011, using a detailed codebook, 217 sexually explicit advertisements on a male sex-seeking website were coded for themes, actor characteristics and sexual acts depicted. Multivariable logistic regression models examined the association between skin colour, theme, sexual acts and condomless sex acts. Nearly half (45%) featured a 'thug' theme (a style emphasising Black masculinity/hip-hop culture), 21% featured a college theme and 44% featured condomless sex. Advertisements featuring only Black men, advertisements featuring Black men with men of other skin tones and advertisements depicting a thug theme were positively associated with depictions of condomless sex. Online sexually explicit advertisements featuring Black themes and actors more frequently depicted condomless sex than advertisements with White men alone. Future research should examine whether depictions of Black men engaging in condomless sex in online advertisements influence the sexual norms and cognitions of Black men who have sex with men and their partners.

  6. Utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information

    Science.gov (United States)

    2009-04-28

    A study was conducted to explore the utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information, such as electronic charts and moving map displays. The goal of this research is to support t...

  7. Depiction of minute structures of the lung parenchyma using new super fine resolution CT

    Energy Technology Data Exchange (ETDEWEB)

    Moriya, Hiroshi; Toshima, Masamichi; Suzuki, Kenji; Katakura, Toshihiko [Fukushima Medical Coll. (Japan). Hospital; Miyashita, Souji [Azabu Hospital, Sapporo (Japan); Okumura, Miwa; Rifu, Toshihiro [Toshiba Corp., Otawara, Tochigi (Japan). Nasu Works

    2003-01-01

    The secondary pulmonary lobule is a structural unit that is composed of pulmonary parenchyma measuring 1 cm or less in size and has been the basis for the morphological evaluation of many pulmonary diseases. However, it is difficult to clearly visualize the structures in the conventional CT scanner. The objective of this study is to depict the pulmonary lobular structures using a new super fine resolution CT with a high contrast resolution of 0.25 mm. In the volunteer study, small pulmonary veins, centrilobular pulmonary arterioles and some bronchioles were depicted. In the fixed lung specimen study, bronchioles were depicted. With regard to bronchi peripheral, a larger number of bronchi could be depicted compared with the non-amended MSCT scanner. These technological advances permit pulmonary diseases to be accurately diagnosed based on the evaluation of the lobular structure. (author)

  8. Examination of muscularity and body fat depictions in magazines that target heterosexual and gay men.

    Science.gov (United States)

    Lanzieri, Nicholas; Cook, Brian J

    2013-03-01

    Previous content analyses of magazine images have typically examined within genres but failed to include comparisons between publications intended for various populations. The purpose of this study was to examine depictions of muscularity and thinness of male images in several widely distributed magazines that target male audiences from a variety of genres. Twenty-three magazine titles with the highest circulation rates that targeted heterosexual men, gay men, and general audiences were selected for image analyses. We found that magazines that target gay male audiences depicted images of men who were thinner in comparison to magazines targeting heterosexual men. Both gay and heterosexual magazines depicted male images with greater muscularity than magazines intended for general audiences. Differences in male image depictions in magazines may contribute to the promotion of an unattainable body ideal in some subgroups of gay culture. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information

    Science.gov (United States)

    2009-01-01

    This report describes a study conducted to explore the utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information. The study gathered data from a large number of pilots who conduct all type...

  10. Results of EPRI/ANL DCH investigations and model development

    International Nuclear Information System (INIS)

    Spencer, B.W.; Sienicki, J.J.; Sehgal, B.R.; Merilo, M.

    1988-01-01

    The results of a series of five experiments are described addressing the severity and mitigation of direct containment heating. The tests were performed in a 1:30 linear scale mockup of the Zion PWR containment system using a reactor-material corium melt consisting of 60% UO 2 , 16% ZrO 2 , 24% SSt at nominally 2800C initial temperature. A ''worst-case'' type test involving unimpeded corium dispersal through an air atmosphere in a closed vessel produced an atmosphere heatup of 323K, equivalent to a DCH efficiency of 62%. With the addition of structural features which impeded the corium dispersal, representative of dispersal pathway features at Zion, the DCH efficiency was reduced to 1--5%. (This important result is scale dependent and requires larger scale tests such as the SURTSEY program at SNL plus mechanistic modeling for application to the reactor system.) With the addition of water in the cavity region, there was no measurable heatup of the atmosphere. This was attributable to the vigorous codispersal of water with corium which prevented the temperature of the atmosphere from significantly exceeding T/sub sat/. In this case the DCH load was replaced by the more benign ''steam spike'' from corium quench. Significant oxidation of the corium constituents occurred in the tests, adding chemical energy to the system and producing hydrogen. Overall, the results suggest that with consideration of realistic, plant specific, mitigating features, DCH may be no worse and possibly far less severe than the previously examined steam spike. Implications for accident management are addressed. 17 refs., 7 figs., 4 tabs

  11. Depictions of tobacco use in 2007 broadcast television programming popular among US youth.

    Science.gov (United States)

    Cullen, Jennifer; Sokol, Natasha A; Slawek, Deepika; Allen, Jane A; Vallone, Donna; Healton, Cheryl

    2011-02-01

    To determine the quantity of tobacco use in network television programming popular among US youth and to examine variation in tobacco depictions by TV Parental Guidelines system rating and television network. A content analysis was conducted of broadcast network television programming popular among youth. Nielsen viewership rating data were used to identify a sample of top-rated television series for youth aged 12 to 17 years during the fall 2007 television season. Depictions of tobacco use per television episode were examined by TV Parental Guidelines rating and television network. χ(2) testing was used to examine differences in proportions of tobacco depictions across television episode ratings and networks. Data collection and analysis were conducted at the American Legacy Foundation (now known as Legacy). Broadcast television viewers in 2007. Tobacco use depictions on broadcast television were examined. Forty percent of television episodes examined had at least 1 depiction of tobacco use. Of these depictions, 89% were of cigarettes. Among episodes rated TV-PG (ie, parental guidance suggested) (N = 73), 50% showed 1 or more incidents of cigarette use, in contrast to 26% of TV-14 (ie, parents strongly cautioned) episodes. The percentage of episodes with any tobacco use depictions was highest on the FOX network (44%; n = 32), followed closely by The CW (CBS-Warner Brothers) (41%; n = 30). Substantial tobacco use was observed in television shows popular among youth. It is projected that almost 1 million youth were exposed to tobacco depictions through the programming examined. Tobacco use on television should be a cause for concern, particularly because of the high volume of television viewing among younger audiences.

  12. A Duality Result for the Generalized Erlang Risk Model

    Directory of Open Access Journals (Sweden)

    Lanpeng Ji

    2014-11-01

    Full Text Available In this article, we consider the generalized Erlang risk model and its dual model. By using a conditional measure-preserving correspondence between the two models, we derive an identity for two interesting conditional probabilities. Applications to the discounted joint density of the surplus prior to ruin and the deficit at ruin are also discussed.

  13. Waste glass corrosion modeling: Comparison with experimental results

    International Nuclear Information System (INIS)

    Bourcier, W.L.

    1994-01-01

    Models for borosilicate glass dissolution must account for the processes of (1) kinetically-controlled network dissolution, (2) precipitation of secondary phases, (3) ion exchange, (4) rate-limiting diffusive transport of silica through a hydrous surface reaction layer, and (5) specific glass surface interactions with dissolved cations and anions. Current long-term corrosion models for borosilicate glass employ a rate equation consistent with transition state theory embodied in a geochemical reaction-path modeling program that calculates aqueous phase speciation and mineral precipitation/dissolution. These models are currently under development. Future experimental and modeling work to better quantify the rate-controlling processes and validate these models are necessary before the models can be used in repository performance assessment calculations

  14. Argonne Fuel Cycle Facility ventilation system -- modeling and results

    International Nuclear Information System (INIS)

    Mohr, D.; Feldman, E.E.; Danielson, W.F.

    1995-01-01

    This paper describes an integrated study of the Argonne-West Fuel Cycle Facility (FCF) interconnected ventilation systems during various operations. Analyses and test results include first a nominal condition reflecting balanced pressures and flows followed by several infrequent and off-normal scenarios. This effort is the first study of the FCF ventilation systems as an integrated network wherein the hydraulic effects of all major air systems have been analyzed and tested. The FCF building consists of many interconnected regions in which nuclear fuel is handled, transported and reprocessed. The ventilation systems comprise a large number of ducts, fans, dampers, and filters which together must provide clean, properly conditioned air to the worker occupied spaces of the facility while preventing the spread of airborne radioactive materials to clean am-as or the atmosphere. This objective is achieved by keeping the FCF building at a partial vacuum in which the contaminated areas are kept at lower pressures than the other worker occupied spaces. The ventilation systems of FCF and the EBR-II reactor are analyzed as an integrated totality, as demonstrated. We then developed the network model shown in Fig. 2 for the TORAC code. The scope of this study was to assess the measured results from the acceptance/flow balancing testing and to predict the effects of power failures, hatch and door openings, single-failure faulted conditions, EBR-II isolation, and other infrequent operations. The studies show that the FCF ventilation systems am very controllable and remain stable following off-normal events. In addition, the FCF ventilation system complex is essentially immune to reverse flows and spread of contamination to clean areas during normal and off-normal operation

  15. ExEP yield modeling tool and validation test results

    Science.gov (United States)

    Morgan, Rhonda; Turmon, Michael; Delacroix, Christian; Savransky, Dmitry; Garrett, Daniel; Lowrance, Patrick; Liu, Xiang Cate; Nunez, Paul

    2017-09-01

    EXOSIMS is an open-source simulation tool for parametric modeling of the detection yield and characterization of exoplanets. EXOSIMS has been adopted by the Exoplanet Exploration Programs Standards Definition and Evaluation Team (ExSDET) as a common mechanism for comparison of exoplanet mission concept studies. To ensure trustworthiness of the tool, we developed a validation test plan that leverages the Python-language unit-test framework, utilizes integration tests for selected module interactions, and performs end-to-end crossvalidation with other yield tools. This paper presents the test methods and results, with the physics-based tests such as photometry and integration time calculation treated in detail and the functional tests treated summarily. The test case utilized a 4m unobscured telescope with an idealized coronagraph and an exoplanet population from the IPAC radial velocity (RV) exoplanet catalog. The known RV planets were set at quadrature to allow deterministic validation of the calculation of physical parameters, such as working angle, photon counts and integration time. The observing keepout region was tested by generating plots and movies of the targets and the keepout zone over a year. Although the keepout integration test required the interpretation of a user, the test revealed problems in the L2 halo orbit and the parameterization of keepout applied to some solar system bodies, which the development team was able to address. The validation testing of EXOSIMS was performed iteratively with the developers of EXOSIMS and resulted in a more robust, stable, and trustworthy tool that the exoplanet community can use to simulate exoplanet direct-detection missions from probe class, to WFIRST, up to large mission concepts such as HabEx and LUVOIR.

  16. Final model independent result of DAMA/LIBRA-phase1

    Energy Technology Data Exchange (ETDEWEB)

    Bernabei, R.; D' Angelo, S.; Di Marco, A. [Universita di Roma ' ' Tor Vergata' ' , Dipartimento di Fisica, Rome (Italy); INFN, sez. Roma ' ' Tor Vergata' ' , Rome (Italy); Belli, P. [INFN, sez. Roma ' ' Tor Vergata' ' , Rome (Italy); Cappella, F.; D' Angelo, A.; Prosperi, D. [Universita di Roma ' ' La Sapienza' ' , Dipartimento di Fisica, Rome (Italy); INFN, sez. Roma, Rome (Italy); Caracciolo, V.; Castellano, S.; Cerulli, R. [INFN, Laboratori Nazionali del Gran Sasso, Assergi (Italy); Dai, C.J.; He, H.L.; Kuang, H.H.; Ma, X.H.; Sheng, X.D.; Wang, R.G. [Chinese Academy, IHEP, Beijing (China); Incicchitti, A. [INFN, sez. Roma, Rome (Italy); Montecchia, F. [INFN, sez. Roma ' ' Tor Vergata' ' , Rome (Italy); Universita di Roma ' ' Tor Vergata' ' , Dipartimento di Ingegneria Civile e Ingegneria Informatica, Rome (Italy); Ye, Z.P. [Chinese Academy, IHEP, Beijing (China); University of Jing Gangshan, Jiangxi (China)

    2013-12-15

    The results obtained with the total exposure of 1.04 ton x yr collected by DAMA/LIBRA-phase1 deep underground at the Gran Sasso National Laboratory (LNGS) of the I.N.F.N. during 7 annual cycles (i.e. adding a further 0.17 ton x yr exposure) are presented. The DAMA/LIBRA-phase1 data give evidence for the presence of Dark Matter (DM) particles in the galactic halo, on the basis of the exploited model independent DM annual modulation signature by using highly radio-pure NaI(Tl) target, at 7.5{sigma} C.L. Including also the first generation DAMA/NaI experiment (cumulative exposure 1.33 ton x yr, corresponding to 14 annual cycles), the C.L. is 9.3{sigma} and the modulation amplitude of the single-hit events in the (2-6) keV energy interval is: (0.0112{+-}0.0012) cpd/kg/keV; the measured phase is (144{+-}7) days and the measured period is (0.998{+-}0.002) yr, values well in agreement with those expected for DM particles. No systematic or side reaction able to mimic the exploited DM signature has been found or suggested by anyone over more than a decade. (orig.)

  17. Innovation ecosystem model for commercialization of research results

    Directory of Open Access Journals (Sweden)

    Vlăduţ Gabriel

    2017-07-01

    Full Text Available Innovation means Creativity and Added value recognise by the market. The first step in creating a sustainable commercialization of research results, Technological Transfer – TT mechanism, on one hand is to define the “technology” which will be transferred and on other hand to define the context in which the TT mechanism work, the ecosystem. The focus must be set on technology as an entity, not as a science or a study of the practical industrial arts and certainly not any specific applied science. The transfer object, the technology, must rely on a subjectively determined but specifiable set of processes and products. Focusing on the product is not sufficient to the transfer and diffusion of technology. It is not merely the product that is transferred but also knowledge of its use and application. The innovation ecosystem model brings together new companies, experienced business leaders, researchers, government officials, established technology companies, and investors. This environment provides those new companies with a wealth of technical expertise, business experience, and access to capital that supports innovation in the early stages of growth.

  18. Coastal and rain-induced wind variability depicted by scatterometers

    Science.gov (United States)

    Portabella, M.; Lin, W.; Stoffelen, A.; Turiel, A.; Verhoef, A.; Verspeek, J.; Ballabrera, J.; Vogelzang, J.

    2012-04-01

    A detailed knowledge of local wind variability near the shore is very important since it strongly affects the weather and microclimate in coastal regions. Since coastal areas are densely populated and most activity at sea occurs near the shore, sea-surface wind field information is important for a number of applications. In the vicinity of land sea-breeze, wave fetch, katabatic and current effects are more likely than in the open ocean, thus enhancing air-sea interaction. Also very relevant for air-sea interaction are the rain-induced phenomena, such as downbursts and convergence. Relatively cold and dry air is effectively transported to the ocean surface and surface winds are enhanced. In general, both coastal and rain-induced wind variability are poorly resolved by Numerical Weather Prediction (NWP) models. Satellite real aperture radars (i.e., scatterometers) are known to provide accurate mesoscale (25-50 km resolution) sea surface wind field information used in a wide variety of applications. Nowadays, there are two operating scatterometers in orbit, i.e., the C-band Advanced Scatterometer (ASCAT) onboard Metop-A and the Ku-band scatterometer (OSCAT) onboard Oceansat-2. The EUMETSAT Ocean and Sea Ice Satellite Application Facility (OSI SAF) delivers several ASCAT level 2 wind products with 25 km and 12.5 km Wind Vector Cell (WVC) spacing, including a pre-operational coastal wind product as well as an OSCAT level 2 wind product with 50 km spacing in development status. Rain is known to both attenuate and scatter the microwave signal. In addition, there is a "splashing" effect. The roughness of the sea surface is increased because of splashing due to rain drops. The so-called "rain contamination" is larger for Ku-band scatterometer systems than for C-band systems. Moreover, the associated downdrafts lead to variable wind speeds and directions, further complicating the wind retrieval. The C-band ASCAT high resolution wind processing is validated under rainy

  19. Blade element momentum modeling of inflow with shear in comparison with advanced model results

    DEFF Research Database (Denmark)

    Aagaard Madsen, Helge; Riziotis, V.; Zahle, Frederik

    2012-01-01

    shear is present in the inflow. This gives guidance to how the BEM modeling of shear should be implemented. Another result from the advanced vortex model computations is a clear indication of influence of the ground, and the general tendency is a speed up effect of the flow through the rotor giving...

  20. Regionalization of climate model results for the North Sea

    Energy Technology Data Exchange (ETDEWEB)

    Kauker, F.

    1999-07-01

    A dynamical downscaling is presented that allows an estimation of potential effects of climate change on the North Sea. Therefore, the ocean general circulation model OPYC is adapted for application on a shelf by adding a lateral boundary formulation and a tide model. In this set-up the model is forced, first, with data from the ECMWF reanalysis for model validation and the study of the natural variability, and, second, with data from climate change experiments to estimate the effects of climate change on the North Sea. (orig.)

  1. PHOTOGRAPHY AS A MEANS OF DEPICTING GENIUS LOCI?

    Directory of Open Access Journals (Sweden)

    Iulia DOROFTEI

    2016-10-01

    Full Text Available The paper aims to explore the concept of genius loci (spirit of a place starting from Christian Norberg-Schulz’s notable work “Genius Loci: Towards a Phenomenology of Architecture” and to reflect on the possibility of capturing the spirit of a place through photography. The problem arises in the context of a predominantly visual culture, where photography has become an accesible and omnipresent means of experiencing the world and, therefore, considered a convenient tool for gaining (a type of knowledge. A photographic method of exploring the spirirt of the place could serve in understanding local characteristics, in identifying the elements that make a place unique and recognizible. Norberg-Schulz’s position and other views on the concept of genius loci have been analysed. A photo-essay was employed in order to explore the spirit of the old town of Chefchaouen in Morocco and the ambiguity and dual nature of the concept. A critical reflection was conducted with respect to the results.

  2. Depicting the Orient in Wilkie Collins’ The Moonstone

    Directory of Open Access Journals (Sweden)

    Amna Matar Al-Neyadi

    2015-11-01

    Full Text Available Nineteenth century Britain witnessed an increased interest with the Orient, largely as a result of the imperial expansion that reached its peak during that time. India was one of the main Oriental interests of the Victorians because of the political, commercial, religious and scientific passion of the nineteenth century people in India. For that reason, various Victorian authors who wrote about India were mostly characterized as being orientalist and writing in a biased way. One such example of this was Joseph Rudyard Kipling. This, as Edward Said explains, was because nineteenth century writers were aware of the empire’s authority. However, I propose that Wilkie Collins tended to have a positive attitude towards the Orient in his novel The Moonstone and towards the Brahmins specifically, which is an attitude that deviates from what is currently known about him. To argue this, the paper will analyse the narrative techniques and the reflection of some of the characters’ attitudes towards the Orient that Collins adopts in his novel in order to allow Victorian readers to challenge the stereotyped beliefs of the Orient. It will also comment on Collins’s employment of the sensational sub-genre particularly to draw his own attitude of the Orient.

  3. Effect of geometry of rice kernels on drying modeling results

    Science.gov (United States)

    Geometry of rice grain is commonly represented by sphere, spheroid or ellipsoid shapes in the drying models. Models using simpler shapes are easy to solve mathematically, however, deviation from the true grain shape might lead to large errors in predictions of drying characteristics such as, moistur...

  4. Spinal cord stimulation: modeling results and clinical data

    NARCIS (Netherlands)

    Struijk, Johannes J.; Struijk, J.J.; Holsheimer, J.; Barolat, Giancarlo; He, Jiping

    1992-01-01

    The potential distribution in volume couductor models of the spinal cord at cervical, midthoracic and lowthoracic levels, due to epidural stimulation, was calculated. Treshold stimuli of modeled myelhated dorsal column and dorsal root fibers were calculated and were compared with perception

  5. Quark cluster model of nuclei and lepton scattering results

    International Nuclear Information System (INIS)

    Vary, J.P.; Iowa State Univ. of Science and Technology, Ames

    1984-01-01

    A review of the quark cluster model (QCM) of nuclei is presented along with applications to deep inelastic lepton scattering and elastic lepton scattering experiments. In addition a sample comparison is made with high momentum transfer (p, π) data. The QCM prediction for the ratio of nuclear structure functions in the x > 1 domain is discussed as a critical test of the model

  6. How to: understanding SWAT model uncertainty relative to measured results

    Science.gov (United States)

    Watershed models are being relied upon to contribute to most policy-making decisions of watershed management, and the demand for an accurate accounting of complete model uncertainty is rising. Generalized likelihood uncertainty estimation (GLUE) is a widely used method for quantifying uncertainty i...

  7. results

    Directory of Open Access Journals (Sweden)

    Salabura Piotr

    2017-01-01

    Full Text Available HADES experiment at GSI is the only high precision experiment probing nuclear matter in the beam energy range of a few AGeV. Pion, proton and ion beams are used to study rare dielectron and strangeness probes to diagnose properties of strongly interacting matter in this energy regime. Selected results from p + A and A + A collisions are presented and discussed.

  8. Depicting mass flow rate of R134a /LPG refrigerant through straight and helical coiled adiabatic capillary tubes of vapor compression refrigeration system using artificial neural network approach

    Science.gov (United States)

    Gill, Jatinder; Singh, Jagdev

    2018-02-01

    In this work, an experimental investigation is carried out with R134a and LPG refrigerant mixture for depicting mass flow rate through straight and helical coil adiabatic capillary tubes in a vapor compression refrigeration system. Various experiments were conducted under steady-state conditions, by changing capillary tube length, inner diameter, coil diameter and degree of subcooling. The results showed that mass flow rate through helical coil capillary tube was found lower than straight capillary tube by about 5-16%. Dimensionless correlation and Artificial Neural Network (ANN) models were developed to predict mass flow rate. It was found that dimensionless correlation and ANN model predictions agreed well with experimental results and brought out an absolute fraction of variance of 0.961 and 0.988, root mean square error of 0.489 and 0.275 and mean absolute percentage error of 4.75% and 2.31% respectively. The results suggested that ANN model shows better statistical prediction than dimensionless correlation model.

  9. Wave-current interactions: model development and preliminary results

    Science.gov (United States)

    Mayet, Clement; Lyard, Florent; Ardhuin, Fabrice

    2013-04-01

    The coastal area concentrates many uses that require integrated management based on diagnostic and predictive tools to understand and anticipate the future of pollution from land or sea, and learn more about natural hazards at sea or activity on the coast. The realistic modelling of coastal hydrodynamics needs to take into account various processes which interact, including tides, surges, and sea state (Wolf [2008]). These processes act at different spatial scales. Unstructured-grid models have shown the ability to satisfy these needs, given that a good mesh resolution criterion is used. We worked on adding a sea state forcing in a hydrodynamic circulation model. The sea state model is the unstructured version of WAVEWATCH III c (Tolman [2008]) (which version is developed at IFREMER, Brest (Ardhuin et al. [2010]) ), and the hydrodynamic model is the 2D barotropic module of the unstructured-grid finite element model T-UGOm (Le Bars et al. [2010]). We chose to use the radiation stress approach (Longuet-Higgins and Stewart [1964]) to represent the effect of surface waves (wind waves and swell) in the barotropic model, as previously done by Mastenbroek et al. [1993]and others. We present here some validation of the model against academic cases : a 2D plane beach (Haas and Warner [2009]) and a simple bathymetric step with analytic solution for waves (Ardhuin et al. [2008]). In a second part we present realistic application in the Ushant Sea during extreme event. References Ardhuin, F., N. Rascle, and K. Belibassakis, Explicit wave-averaged primitive equations using a generalized Lagrangian mean, Ocean Modelling, 20 (1), 35-60, doi:10.1016/j.ocemod.2007.07.001, 2008. Ardhuin, F., et al., Semiempirical Dissipation Source Functions for Ocean Waves. Part I: Definition, Calibration, and Validation, J. Phys. Oceanogr., 40 (9), 1917-1941, doi:10.1175/2010JPO4324.1, 2010. Haas, K. A., and J. C. Warner, Comparing a quasi-3D to a full 3D nearshore circulation model: SHORECIRC and

  10. New analytic results for speciation times in neutral models.

    Science.gov (United States)

    Gernhard, Tanja

    2008-05-01

    In this paper, we investigate the standard Yule model, and a recently studied model of speciation and extinction, the "critical branching process." We develop an analytic way-as opposed to the common simulation approach-for calculating the speciation times in a reconstructed phylogenetic tree. Simple expressions for the density and the moments of the speciation times are obtained. Methods for dating a speciation event become valuable, if for the reconstructed phylogenetic trees, no time scale is available. A missing time scale could be due to supertree methods, morphological data, or molecular data which violates the molecular clock. Our analytic approach is, in particular, useful for the model with extinction, since simulations of birth-death processes which are conditioned on obtaining n extant species today are quite delicate. Further, simulations are very time consuming for big n under both models.

  11. Box photosynthesis modeling results for WRF/CMAQ LSM

    Data.gov (United States)

    U.S. Environmental Protection Agency — Box Photosynthesis model simulations for latent heat and ozone at 6 different FLUXNET sites. This dataset is associated with the following publication: Ran, L., J....

  12. New Results in Optical Modelling of Quantum Well Solar Cells

    Directory of Open Access Journals (Sweden)

    Silvian Fara

    2012-01-01

    Full Text Available This project brought further advancements to the quantum well solar cell concept proposed by Keith Barnham. In this paper, the optical modelling of MQW solar cells was analyzed and we focussed on the following topics: (i simulation of the refraction index and the reflectance, (ii simulation of the absorption coefficient, (iii simulation of the quantum efficiency for the absorption process, (iv discussion and modelling of the quantum confinement effect, and (v evaluation of datasheet parameters of the MQW cell.

  13. Some Econometric Results for the Blanchard-Watson Bubble Model

    DEFF Research Database (Denmark)

    Johansen, Soren; Lange, Theis

    The purpose of the present paper is to analyse a simple bubble model suggested by Blanchard and Watson. The model is defined by y(t) =s(t)¿y(t-1)+e(t), t=1,…,n, where s(t) is an i.i.d. binary variable with p=P(s(t)=1), independent of e(t) i.i.d. with mean zero and finite variance. We take ¿>1 so ...

  14. The animal model determines the results of Aeromonas virulence factors

    Directory of Open Access Journals (Sweden)

    Alejandro Romero

    2016-10-01

    Full Text Available The selection of an experimental animal model is of great importance in the study of bacterial virulence factors. Here, a bath infection of zebrafish larvae is proposed as an alternative model to study the virulence factors of A. hydrophila. Intraperitoneal infections in mice and trout were compared with bath infections in zebrafish larvae using specific mutants. The great advantage of this model is that bath immersion mimics the natural route of infection, and injury to the tail also provides a natural portal of entry for the bacteria. The implication of T3SS in the virulence of A. hydrophila was analysed using the AH-1::aopB mutant. This mutant was less virulent than the wild-type strain when inoculated into zebrafish larvae, as described in other vertebrates. However, the zebrafish model exhibited slight differences in mortality kinetics only observed using invertebrate models. Infections using the mutant AH-1∆vapA lacking the gene coding for the surface S-layer suggested that this protein was not totally necessary to the bacteria once it was inside the host, but it contributed to the inflammatory response. Only when healthy zebrafish larvae were infected did the mutant produce less mortality than the wild type. Variations between models were evidenced using the AH-1∆rmlB, which lacks the O-antigen lipopolysaccharide (LPS, and the AH-1∆wahD, which lacks the O-antigen LPS and part of the LPS outer-core. Both mutants showed decreased mortality in all of the animal models, but the differences between them were only observed in injured zebrafish larvae, suggesting that residues from the LPS outer core must be important for virulence. The greatest differences were observed using the AH-1ΔFlaB-J (lacking polar flagella and unable to swim and the AH-1::motX (non-motile but producing flagella. They were as pathogenic as the wild-type strain when injected into mice and trout, but no mortalities were registered in zebrafish larvae. This study

  15. Results from Development of Model Specifications for Multifamily Energy Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Brozyna, K.

    2012-08-01

    Specifications, modeled after CSI MasterFormat, provide the trade contractors and builders with requirements and recommendations on specific building materials, components and industry practices that comply with the expectations and intent of the requirements within the various funding programs associated with a project. The goal is to create a greater level of consistency in execution of energy efficiency retrofits measures across the multiple regions a developer may work. IBACOS and Mercy Housing developed sample model specifications based on a common building construction type that Mercy Housing encounters.

  16. Results From Development of Model Specifications for Multifamily Energy Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Brozyna, Kevin [IBACOS, Inc., Pittsburgh, PA (United States)

    2012-08-01

    Specifications, modeled after CSI MasterFormat, provide the trade contractors and builders with requirements and recommendations on specific building materials, components and industry practices that comply with the expectations and intent of the requirements within the various funding programs associated with a project. The goal is to create a greater level of consistency in execution of energy efficiency retrofits measures across the multiple regions a developer may work. IBACOS and Mercy Housing developed sample model specifications based on a common building construction type that Mercy Housing encounters.

  17. Networks Depicting the Fine-Scale Co-Occurrences of Fungi in Soil Horizons.

    Directory of Open Access Journals (Sweden)

    Hirokazu Toju

    Full Text Available Fungi in soil play pivotal roles in nutrient cycling, pest controls, and plant community succession in terrestrial ecosystems. Despite the ecosystem functions provided by soil fungi, our knowledge of the assembly processes of belowground fungi has been limited. In particular, we still have limited knowledge of how diverse functional groups of fungi interact with each other in facilitative and competitive ways in soil. Based on the high-throughput sequencing data of fungi in a cool-temperate forest in northern Japan, we analyzed how taxonomically and functionally diverse fungi showed correlated fine-scale distributions in soil. By uncovering pairs of fungi that frequently co-occurred in the same soil samples, networks depicting fine-scale co-occurrences of fungi were inferred at the O (organic matter and A (surface soil horizons. The results then led to the working hypothesis that mycorrhizal, endophytic, saprotrophic, and pathogenic fungi could form compartmentalized (modular networks of facilitative, antagonistic, and/or competitive interactions in belowground ecosystems. Overall, this study provides a research basis for further understanding how interspecific interactions, along with sharing of niches among fungi, drive the dynamics of poorly explored biospheres in soil.

  18. Diagnostic value to depict branch pancreatic ducts dilatation by MR cholangiopancreatography

    International Nuclear Information System (INIS)

    Li Liang; Yuan Jiachang; Jin Erhu

    2009-01-01

    Objective: To evaluate the diagnostic value of depicting dilatation of branch pancreatic ducts (BPD) in patients with chronic pancreatitis and pancreatic carcinomas in MR cholangiopancreatography. Methods: Forty-five patients with chronic pancreatitis and thirty patients with pancreatic carcinomas were enrolled in the study. All the patients underwent MRI using axial T 1 weighted imaging, T 2 weighted imaging and MR cholangiopancreatography in a 3.0 T MR unit. and dilatation of BPD was analyse by which their morphology, location and extent of dilatation. Results: Morphologically, dilatation of BPD in cystic, dendroid manner or both of them were seen in 19, 42 and 16 cases in chronic pancreatitis, and 6, 29 and 5 cases in pancreatic carcinomas, respectively. In location, dilatation of BPD in proximal, distal or full coverage of main pancreatic duct were seen in 0, 10 and 35 cases in chronic pancreatitis, and 1, 12 and 17 cases in pancreatic carcinomas, respectively. Conclusion: Dilatation of BPD and main pancreatic duct could be well visualized in MR cholangiopancreatography at 3.0 T. It is helpful in differentiating chronic pancreatitis and pancreatic cancinoma to be familiar with features of dilatation of BPD. (authors)

  19. "More Closeted Than Gayness Itself": The Depiction of Same-Sex Couple Violence in Newspaper Media.

    Science.gov (United States)

    Estes, Michelle L; Webber, Gretchen R

    2017-10-01

    Same-sex intimate partner violence (IPV) lacks mainstream news media coverage. News media report on those stories that are most prominent, and these stories are often shaped and presented within a White, heterosexual, upper-class, male framework. This framework largely ignores or misrepresents those that do not fit these characteristics, resulting in a gap in research and coverage of same-sex IPV. This article explores whether U.S. newspapers cover same-sex IPV, how often, and how same-sex couple violence is portrayed in newspapers when covered. Twenty-five newspaper articles published from 2005 to 2015, 10 years prior to the U.S. Supreme Court decision that legalized same-sex marriage, were located and analyzed. Findings indicate sparse newspaper coverage of IPV in same-sex couples. Ten articles highlight the lack of coverage and knowledge related to same-sex couple IPV. Eighteen articles address same-sex IPV as a social issue and highlight resource concerns, police involvement, and heteronormativity and heterosexism. Sixteen articles depict specific instances of IPV in same-sex couples. The overall lack of coverage and how same-sex IPV is covered remains problematic and limited. More mainstream and accurate coverage is needed to effectively address this social issue. Limitations and directions for future research are also discussed.

  20. Analysis of inelastic neutron scattering results on model compounds ...

    Indian Academy of Sciences (India)

    J Tomkinson heterobicyclic molecules could form a reasonable base of model compounds to un- derstand the eigenvectors of one interesting molecular system; the nitrogenous het- erocyclic bases of the nucleotides. Low energy molecular vibrational eigenvectors involve atomic displacements over the molecule as a whole ...

  1. Delta-tilde interpretation of standard linear mixed model results

    DEFF Research Database (Denmark)

    Brockhoff, Per Bruun; Amorim, Isabel de Sousa; Kuznetsova, Alexandra

    2016-01-01

    data set and compared to actual d-prime calculations based on Thurstonian regression modeling through the ordinal package. For more challenging cases we offer a generic "plug-in" implementation of a version of the method as part of the R-package SensMixed. We discuss and clarify the bias mechanisms...

  2. Some Results On The Modelling Of TSS Manufacturing Lines

    Directory of Open Access Journals (Sweden)

    Viorel MÎNZU

    2000-12-01

    Full Text Available This paper deals with the modelling of a particular class of manufacturing lines, governed by a decentralised control strategy so that they balance themselves. Such lines are known as “bucket brigades” and also as “TSS lines”, after their first implementation, at Toyota, in the 70’s. A first study of their behaviour was based upon modelling as stochastic dynamic systems, which emphasised, in the frame of the so-called “Normative Model”, a sufficient condition for self-balancing, that means for autonomous functioning at a steady production rate (stationary behaviour. Under some particular conditions, a simulation analysis of TSS lines could be made on non-linear block diagrams, showing that the state trajectories are piecewise continuous in between occurrences of certain discrete events, which determine their discontinuity. TSS lines may therefore be modelled as hybrid dynamic systems, more specific, with autonomous switching and autonomous impulses (jumps. A stability analysis of such manufacturing lines is allowed by modelling them as hybrid dynamic systems with discontinuous motions.

  3. Some results for the dynamic (s, S) inventory model *

    NARCIS (Netherlands)

    H.C. Tijms

    1971-01-01

    textabstractSummary The periodic review, single item, stationary (s, S) inventory model is considered. There is a fixed lead time, a linear purchase cost, a fixed set‐up cost, a holding and shortage cost function, a discount factor 0 < α≤ 1 and backlogging of unfilled demand. The solution for the

  4. Recent numerical results on the two dimensional Hubbard model

    Energy Technology Data Exchange (ETDEWEB)

    Parola, A.; Sorella, S.; Baroni, S.; Car, R.; Parrinello, M.; Tosatti, E. (SISSA, Trieste (Italy))

    1989-12-01

    A new method for simulating strongly correlated fermionic systems, has been applied to the study of the ground state properties of the 2D Hubbard model at various fillings. Comparison has been made with exact diagonalizations in the 4 x 4 lattices where very good agreement has been verified in all the correlation functions which have been studied: charge, magnetization and momentum distribution. (orig.).

  5. Analytical results for the Sznajd model of opinion formation

    Czech Academy of Sciences Publication Activity Database

    Slanina, František; Lavička, H.

    2003-01-01

    Roč. 35, - (2003), s. 279-288 ISSN 1434-6028 R&D Projects: GA ČR GA202/01/1091 Institutional research plan: CEZ:AV0Z1010914 Keywords : agent models * sociophysics Subject RIV: BE - Theoretical Physics Impact factor: 1.457, year: 2003

  6. Regionalization of climate model results for the North Sea

    Energy Technology Data Exchange (ETDEWEB)

    Kauker, F. [Alfred-Wegener-Institut fuer Polar- und Meeresforschung, Bremerhaven (Germany); Storch, H. von [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Hydrophysik

    2000-07-01

    A dynamical downscaling for the North Sea is presented. The numerical model used for the study is the coupled ice-ocean model OPYC. In a hindcast of the years 1979 to 1993 it was forced with atmospheric forcing of the ECMWF reanalysis. The models capability in simulating the observed mean state and variability in the North Sea is demonstrated by the hindcast. Two time scale ranges, from weekly to seasonal and the longer-than-seasonal time scales are investigated. Shorter time scales, for storm surges, are not captured by the model formulation. The main modes of variability of sea level, sea-surface circulation, sea-surface temperature, and sea-surface salinity are described and connections to atmospheric phenomena, like the NAO, are discussed. T106 ''time-slice'' simulations with a ''2 x CO{sub 2}'' horizon are used to estimate the effects of a changing climate on the shelf sea ''North Sea''. The ''2 x CO{sub 2}'' changes in the surface forcing are accompanied by changes in the lateral oceanic boundary conditions taken from a global coupled climate model. For ''2 x CO{sub 2}'' the time mean sea level increases up to 25 cm in the German Bight in the winter, where 15 cm are due to the surface forcing and 10 cm due to thermal expansion. This change is compared to the ''natural'' variability as simulated in the ECMWF integration and found to be not outside the range spanned by it. The variability of sea level on the weekly-to-seasonal time-scales is significantly reduced in the scenario integration. The variability on the longer-than-seasonal time-scales in the control and scenario runs is much smaller then in the ECMWF integration. This is traced back to the use of ''time-slice'' experiments. Discriminating between locally forced changes and changes induced at the lateral oceanic boundaries of the model in the circulation and

  7. Dynamic model of the electrorheological fluid based on measurement results

    International Nuclear Information System (INIS)

    Krivenkov, K; Ulrich, S; Bruns, R

    2013-01-01

    To develop modern applications for vibration decoupling based on electrorheological fluids with suitable control strategies, an appropriate mathematical model of the ERF is necessary. The devices mostly used have annular-shape electrorheological valves. This requires the use of flow channels to measure the static and dynamic properties of the electrorheological fluids in similar flow conditions. Particularly for the identification of the dynamic behavior of the fluids, the influences of the non-electrorheological properties on the overall system must be taken into account. In this contribution three types of parameters with several nonlinear dependencies for the mapping of the static and dynamic properties of the ERF are considered: electro-rheological, hydraulic and electrical. The mathematical model introduced can precisely demonstrate the static and dynamic behavior of the electrorheological fluid and can be used for the future design of real systems for vibration decoupling or other systems with high dynamic requirements.

  8. 1-g model loading tests: methods and results

    Czech Academy of Sciences Publication Activity Database

    Feda, Jaroslav

    1999-01-01

    Roč. 2, č. 4 (1999), s. 371-381 ISSN 1436-6517. [Int.Conf. on Soil - Structure Interaction in Urban Civ. Engineering. Darmstadt, 08.10.1999-09.10.1999] R&D Projects: GA MŠk OC C7.10 Keywords : shallow foundation * model tests * sandy subsoil * bearing capacity * subsoil failure * volume deformation Subject RIV: JM - Building Engineering

  9. Perceptions of family relations when mothers and fathers are depicted with different parenting styles.

    Science.gov (United States)

    McGillicuddy-De Lisi, Ann V; De Lisi, Richard

    2007-12-01

    College students (N = 125) reported their perceptions of family relations in response to vignettes that presented 5 different parenting styles. Participants viewed family relations as most positive when parents were portrayed as authoritative or permissive and as most negative when parents were portrayed as uninvolved-neglecting or authoritarian. Student gender and parent gender effects qualified these findings. Female students reported family relations to be less positive than did male students when parents were depicted as authoritarian or as uninvolved-neglecting, and they rated family relations more positively than did male students when parents were depicted as permissive. Participants viewed family relations as more positive when mothers rather than fathers were presented as permissive and when fathers rather than mothers were depicted as authoritarian. The authors discuss the findings of the study in relation to theories of beliefs about children and implications for future parenting styles of male and female college students.

  10. Sharing brain mapping statistical results with the neuroimaging data model

    Science.gov (United States)

    Maumet, Camille; Auer, Tibor; Bowring, Alexander; Chen, Gang; Das, Samir; Flandin, Guillaume; Ghosh, Satrajit; Glatard, Tristan; Gorgolewski, Krzysztof J.; Helmer, Karl G.; Jenkinson, Mark; Keator, David B.; Nichols, B. Nolan; Poline, Jean-Baptiste; Reynolds, Richard; Sochat, Vanessa; Turner, Jessica; Nichols, Thomas E.

    2016-01-01

    Only a tiny fraction of the data and metadata produced by an fMRI study is finally conveyed to the community. This lack of transparency not only hinders the reproducibility of neuroimaging results but also impairs future meta-analyses. In this work we introduce NIDM-Results, a format specification providing a machine-readable description of neuroimaging statistical results along with key image data summarising the experiment. NIDM-Results provides a unified representation of mass univariate analyses including a level of detail consistent with available best practices. This standardized representation allows authors to relay methods and results in a platform-independent regularized format that is not tied to a particular neuroimaging software package. Tools are available to export NIDM-Result graphs and associated files from the widely used SPM and FSL software packages, and the NeuroVault repository can import NIDM-Results archives. The specification is publically available at: http://nidm.nidash.org/specs/nidm-results.html. PMID:27922621

  11. DISCRETE DEFORMATION WAVE DYNAMICS IN SHEAR ZONES: PHYSICAL MODELLING RESULTS

    Directory of Open Access Journals (Sweden)

    S. A. Bornyakov

    2016-01-01

    Full Text Available Observations of earthquake migration along active fault zones [Richter, 1958; Mogi, 1968] and related theoretical concepts [Elsasser, 1969] have laid the foundation for studying the problem of slow deformation waves in the lithosphere. Despite the fact that this problem has been under study for several decades and discussed in numerous publications, convincing evidence for the existence of deformation waves is still lacking. One of the causes is that comprehensive field studies to register such waves by special tools and equipment, which require sufficient organizational and technical resources, have not been conducted yet.The authors attempted at finding a solution to this problem by physical simulation of a major shear zone in an elastic-viscous-plastic model of the lithosphere. The experiment setup is shown in Figure 1 (A. The model material and boundary conditions were specified in accordance with the similarity criteria (described in detail in [Sherman, 1984; Sherman et al., 1991; Bornyakov et al., 2014]. The montmorillonite clay-and-water paste was placed evenly on two stamps of the installation and subject to deformation as the active stamp (1 moved relative to the passive stamp (2 at a constant speed. The upper model surface was covered with fine sand in order to get high-contrast photos. Photos of an emerging shear zone were taken every second by a Basler acA2000-50gm digital camera. Figure 1 (B shows an optical image of a fragment of the shear zone. The photos were processed by the digital image correlation method described in [Sutton et al., 2009]. This method estimates the distribution of components of displacement vectors and strain tensors on the model surface and their evolution over time [Panteleev et al., 2014, 2015].Strain fields and displacements recorded in the optical images of the model surface were estimated in a rectangular box (220.00×72.17 mm shown by a dot-and-dash line in Fig. 1, A. To ensure a sufficient level of

  12. MCNP Modeling Results for Location of Buried TRU Waste Drums

    International Nuclear Information System (INIS)

    Steinman, D K; Schweitzer, J S

    2006-01-01

    In the 1960's, fifty-five gallon drums of TRU waste were buried in shallow pits on remote U.S. Government facilities such as the Idaho National Engineering Laboratory (now split into the Idaho National Laboratory and the Idaho Completion Project [ICP]). Subsequently, it was decided to remove the drums and the material that was in them from the burial pits and send the material to the Waste Isolation Pilot Plant in New Mexico. Several technologies have been tried to locate the drums non-intrusively with enough precision to minimize the chance for material to be spread into the environment. One of these technologies is the placement of steel probe holes in the pits into which wireline logging probes can be lowered to measure properties and concentrations of material surrounding the probe holes for evidence of TRU material. There is also a concern that large quantities of volatile organic compounds (VOC) are also present that would contaminate the environment during removal. In 2001, the Idaho National Engineering and Environmental Laboratory (INEEL) built two pulsed neutron wireline logging tools to measure TRU and VOC around the probe holes. The tools are the Prompt Fission Neutron (PFN) and the Pulsed Neutron Gamma (PNG), respectively. They were tested experimentally in surrogate test holes in 2003. The work reported here estimates the performance of the tools using Monte-Carlo modelling prior to field deployment. A MCNP model was constructed by INEEL personnel. It was modified by the authors to assess the ability of the tools to predict quantitatively the position and concentration of TRU and VOC materials disposed around the probe holes. The model was used to simulate the tools scanning the probe holes vertically in five centimetre increments. A drum was included in the model that could be placed near the probe hole and at other locations out to forty-five centimetres from the probe-hole in five centimetre increments. Scans were performed with no chlorine in the

  13. NASA Air Force Cost Model (NAFCOM): Capabilities and Results

    Science.gov (United States)

    McAfee, Julie; Culver, George; Naderi, Mahmoud

    2011-01-01

    NAFCOM is a parametric estimating tool for space hardware. Uses cost estimating relationships (CERs) which correlate historical costs to mission characteristics to predict new project costs. It is based on historical NASA and Air Force space projects. It is intended to be used in the very early phases of a development project. NAFCOM can be used at the subsystem or component levels and estimates development and production costs. NAFCOM is applicable to various types of missions (crewed spacecraft, uncrewed spacecraft, and launch vehicles). There are two versions of the model: a government version that is restricted and a contractor releasable version.

  14. Solar activity variations of ionosonde measurements and modeling results

    Czech Academy of Sciences Publication Activity Database

    Altadill, D.; Arrazola, D.; Blanch, E.; Burešová, Dalia

    2008-01-01

    Roč. 42, č. 4 (2008), s. 610-616 ISSN 0273-1177 R&D Projects: GA AV ČR 1QS300120506 Grant - others:MCYT(ES) REN2003-08376-C02-02; CSIC(XE) 2004CZ0002; AGAUR(XE) 2006BE00112; AF Research Laboratory(XE) FA8718-L-0072 Institutional research plan: CEZ:AV0Z30420517 Keywords : mid-latitude ionosphere * bottomside modeling * ionospheric variability Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 0.860, year: 2008 http://www.sciencedirect.com/science/journal/02731177

  15. Combining forming results via weld models to powerful numerical assemblies

    NARCIS (Netherlands)

    Kose, K.; Rietman, Bert

    2004-01-01

    Forming simulations generally give satisfying results with respect to thinning, stresses, changed material properties and, with a proper springback calculation, the geometric form. The joining of parts by means of welding yields an extra change of the material properties and the residual stresses.

  16. The Multipole Plasma Trap-PIC Modeling Results

    Science.gov (United States)

    Hicks, Nathaniel; Bowman, Amanda; Godden, Katarina

    2017-10-01

    A radio-frequency (RF) multipole structure is studied via particle-in-cell computer modeling, to assess the response of quasi-neutral plasma to the imposed RF fields. Several regimes, such as pair plasma, antimatter plasma, and conventional (ion-electron) plasma are considered. In the case of equal charge-to-mass ratio of plasma species, the effects of the multipole field are symmetric between positive and negative particles. In the case of a charge-to-mass disparity, the multipole RF parameters (frequency, voltage, structure size) may be chosen such that the light species (e.g. electrons) is strongly confined, while the heavy species (e.g. positive ions) does not respond to the RF field. In this case, the trapped negative space charge creates a potential well that then traps the positive species. 2D and 3D particle-in-cell simulations of this concept are presented, to assess plasma response and trapping dependences on multipole order, consequences of the formation of an RF plasma sheath, and the effects of an axial magnetic field. The scalings of trapped plasma parameters are explored in each of the mentioned regimes, to guide the design of prospective experiments investigating each. Supported by U.S. NSF/DOE Partnership in Basic Plasma Science and Engineering Grant PHY-1619615.

  17. Modeling Framework and Results to Inform Charging Infrastructure Investments

    Energy Technology Data Exchange (ETDEWEB)

    Melaina, Marc W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wood, Eric W [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-01

    The plug-in electric vehicle (PEV) market is experiencing rapid growth with dozens of battery electric (BEV) and plug-in hybrid electric (PHEV) models already available and billions of dollars being invested by automotive manufacturers in the PEV space. Electric range is increasing thanks to larger and more advanced batteries and significant infrastructure investments are being made to enable higher power fast charging. Costs are falling and PEVs are becoming more competitive with conventional vehicles. Moreover, new technologies such as connectivity and automation hold the promise of enhancing the value proposition of PEVs. This presentation outlines a suite of projects funded by the U.S. Department of Energy's Vehicle Technology Office to conduct assessments of the economic value and charging infrastructure requirements of the evolving PEV market. Individual assessments include national evaluations of PEV economic value (assuming 73M PEVs on the road in 2035), national analysis of charging infrastructure requirements (with community and corridor level resolution), and case studies of PEV ownership in Columbus, OH and Massachusetts.

  18. Results from the coupled Michigan MHD model and the Rice Convection Model

    Science.gov (United States)

    de Zeeuw, D.; Sazykin, S.; Wolf, R.; Gombosi, T.; Powell, K.

    A new high performance Rice Convection Model (RCM) has been coupled to the adaptive-grid Michigan MHD model (BATSRUS). This fully coupled code allows us to self-consistently simulate the physics in the inner and middle magnetosphere. A study will be presented of the basic characteristics of the inner and middle magnetosphere in the context of a single coupled-code run with steady inputs. The analysis will include region-2 currents, shielding of the inner magnetosphere, partial ring currents, pressure distribution, magnetic field inflation, and distribution of pV^gamma. The coupled-code simulation will be compared with results from RCM runs and algorithms.

  19. Localized intrahepatic bile duct dilatation without a visible mass or stone as depicted on CT images: findings of malignancy prediction

    International Nuclear Information System (INIS)

    Choi, Ju Wan; Kim, Gab Chul; Jeong, Han Young; Lee, Hui Joong; Lee, Jae Hyuck; Ryeom, Hun Kyu; Kim, Jong Yeol

    2008-01-01

    This study was preformed to evaluate factors that can predict the presence of a malignancy for localized intrahepatic bile duct dilatation without a visible mass or stone as depicted on CT images. A total of 29 patients (male: 16, female: 13) who had localized intrahepatic bile duct dilatation without a visible mass, stone or injury as depicted on CT images were included in the study. A history of extrahepatic malignancy and biliary stone disease, tumor marker levels, CT findings of the intrahepatic bile duct and associated findings were reviewed. The findings were analyzed between two groups (patients with a malignancy and patients with benign disease) on follow-up. In 29 patient, 11 patients had malignant lesions (four metastases and seven cholangiocarcinomas). The history of an extrahepatic malignancy and the shape of an intrahepatic duct obstruction or stenosis as seen on CT were significantly correlated with the results between the benign and malignant group of patients. The follow-up results of the malignant group of patients indicated that for six patients who had developed a new mass, one patient each showed aggravation of ductal dilatation and thickening of the ductal wall. When a patient with localized intrahepatic bile duct dilatation without a definite cause has a history of an extrahepatic malignancy or shows abrupt tapering or irregular narrowing on CT images, short-term follow-up should be performed. The patient should be investigated carefully for mass formation or a change of the dilated bile duct due to a possibility of malignant ductal dilatation

  20. Depictive and metric body size estimation in anorexia nervosa and bulimia nervosa: A systematic review and meta-analysis.

    Science.gov (United States)

    Mölbert, Simone Claire; Klein, Lukas; Thaler, Anne; Mohler, Betty J; Brozzo, Chiara; Martus, Peter; Karnath, Hans-Otto; Zipfel, Stephan; Giel, Katrin Elisabeth

    2017-11-01

    A distorted representation of one's own body is a diagnostic criterion and core psychopathology of both anorexia nervosa (AN) and bulimia nervosa (BN). Despite recent technical advances in research, it is still unknown whether this body image disturbance is characterized by body dissatisfaction and a low ideal weight and/or includes a distorted perception or processing of body size. In this article, we provide an update and meta-analysis of 42 articles summarizing measures and results for body size estimation (BSE) from 926 individuals with AN, 536 individuals with BN and 1920 controls. We replicate findings that individuals with AN and BN overestimate their body size as compared to controls (ES=0.63). Our meta-regression shows that metric methods (BSE by direct or indirect spatial measures) yield larger effect sizes than depictive methods (BSE by evaluating distorted pictures), and that effect sizes are larger for patients with BN than for patients with AN. To interpret these results, we suggest a revised theoretical framework for BSE that accounts for differences between depictive and metric BSE methods regarding the underlying body representations (conceptual vs. perceptual, implicit vs. explicit). We also discuss clinical implications and argue for the importance of multimethod approaches to investigate body image disturbance. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Fiber crossing in human brain depicted with diffusion tensor MR imaging

    DEFF Research Database (Denmark)

    Wiegell, M.R.; Larsson, H.B.; Wedeen, V.J.

    2000-01-01

    Human white matter fiber crossings were investigated with use of the full eigenstructure of the magnetic resonance diffusion tensor. Intravoxel fiber dispersions were characterized by the plane spanned by the major and medium eigenvectors and depicted with three-dimensional graphics. This method...

  2. 36 CFR 13.1188 - Where to get charts depicting closed waters.

    Science.gov (United States)

    2010-07-01

    ... closed waters. 13.1188 Section 13.1188 Parks, Forests, and Public Property NATIONAL PARK SERVICE... and Preserve Vessel Operating Restrictions § 13.1188 Where to get charts depicting closed waters. Closed waters and islands within Glacier Bay as described in §§ 13.1174-13.1180 of this subpart are...

  3. Tradesmen, Traitors, Pirates, and Prostitutes: Depictions of the Flemish in Later Medieval England

    Science.gov (United States)

    Schwamb, Sara M. B.

    2010-01-01

    This study examines the depictions of the Flemish in Chaucer's "The Canterbury Tales", Langland's "Piers Plowman", several historical chronicles including The Brut continuations, poetic works such as "The Libelle of Englysh Polycye", additional short poems dealing directly with events of the Hundred Years' War, and…

  4. Depictions and Gaps: Portrayal of U.S. Poverty in Realistic Fiction Children's Picture Books

    Science.gov (United States)

    Kelley, Jane E.; Darragh, Janine J.

    2011-01-01

    Researchers conducted a critical multicultural analysis of 58 realistic fiction children's picture books that portray people living in poverty and compared these depictions to recent statistics from the United States Census Bureau. The picture books were examined for the following qualities: main character, geographic locale and time era, focal…

  5. 39 CFR Appendix A to Part 121 - Tables Depicting Service Standard Day Ranges

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Tables Depicting Service Standard Day Ranges A Appendix A to Part 121 Postal Service UNITED STATES POSTAL SERVICE POST OFFICE SERVICES [DOMESTIC MAIL] SERVICE STANDARDS FOR MARKET-DOMINANT MAIL PRODUCTS Pt. 121, App. A Appendix A to Part 121—Tables...

  6. The Depiction of Native Americans in Recent (1991-1998) Secondary American History Textbooks.

    Science.gov (United States)

    Sanchez, Antonio R.

    As a follow-up to studies by R. Costo and J. Henry (1970) and J. Loewen (1995), this study examined 12 current secondary level U.S. history textbooks to evaluate their accuracy in depicting Native Americans. The criteria embodied an authenticity guideline based upon the "Five Great Values" (generosity and sharing, respect for elders and…

  7. Wave-Particle Duality and Uncertainty Principle: Phenomenographic Categories of Description of Tertiary Physics Students' Depictions

    Science.gov (United States)

    Ayene, Mengesha; Kriek, Jeanne; Damtie, Baylie

    2011-01-01

    Quantum mechanics is often thought to be a difficult subject to understand, not only in the complexity of its mathematics but also in its conceptual foundation. In this paper we emphasize students' depictions of the uncertainty principle and wave-particle duality of quantum events, phenomena that could serve as a foundation in building an…

  8. The effect of static versus dynamic depictions of actions in verb and sentence production in aphasia

    NARCIS (Netherlands)

    Blankestijn-Wilmsen, Joyce; Damen, Ilona; Voorbraak-Timmerman, Vicky; Hurkmans, Joost; Brouwer de Koning, Janneke; Pross, Anne; Jonkers, Roel

    2017-01-01

    Background: There is a shortage of material for the treatment of verb and sentence production in persons with aphasia (PWAs). In therapy, pictures or photographs depicting actions are often used, even though the meaning of certain verbs clearly involves movement. This aspect of movement is difficult

  9. Stirling cryocooler test results and design model verification

    International Nuclear Information System (INIS)

    Shimko, M.A.; Stacy, W.D.; McCormick, J.A.

    1990-01-01

    This paper reports on progress in developing a long-life Stirling cycle cryocooler for space borne applications. It presents the results from tests on a preliminary breadboard version of the cryocooler used to demonstrate the feasibility of the technology and to validate the regenerator design code used in its development. This machine achieved a cold-end temperature of 65 K while carrying a 1/2 Watt cooling load. The basic machine is a double-acting, flexure-bearing, split Stirling design with linear electromagnetic drives for the expander and compressors. Flat metal diaphragms replace pistons for both sweeping and sealing the machine working volumes. In addition, the double-acting expander couples to a laminar-channel counterflow recuperative heat exchanger for regeneration. A PC compatible design code was developed for this design approach that calculates regenerator loss including heat transfer irreversibilities, pressure drop, and axial conduction in the regenerator walls

  10. Stress Resultant Based Elasto-Viscoplastic Thick Shell Model

    Directory of Open Access Journals (Sweden)

    Pawel Woelke

    2012-01-01

    Full Text Available The current paper presents enhancement introduced to the elasto-viscoplastic shell formulation, which serves as a theoretical base for the finite element code EPSA (Elasto-Plastic Shell Analysis [1–3]. The shell equations used in EPSA are modified to account for transverse shear deformation, which is important in the analysis of thick plates and shells, as well as composite laminates. Transverse shear forces calculated from transverse shear strains are introduced into a rate-dependent yield function, which is similar to Iliushin's yield surface expressed in terms of stress resultants and stress couples [12]. The hardening rule defined by Bieniek and Funaro [4], which allows for representation of the Bauschinger effect on a moment-curvature plane, was previously adopted in EPSA and is used here in the same form. Viscoplastic strain rates are calculated, taking into account the transverse shears. Only non-layered shells are considered in this work.

  11. Error statistics of hidden Markov model and hidden Boltzmann model results

    Directory of Open Access Journals (Sweden)

    Newberg Lee A

    2009-07-01

    Full Text Available Abstract Background Hidden Markov models and hidden Boltzmann models are employed in computational biology and a variety of other scientific fields for a variety of analyses of sequential data. Whether the associated algorithms are used to compute an actual probability or, more generally, an odds ratio or some other score, a frequent requirement is that the error statistics of a given score be known. What is the chance that random data would achieve that score or better? What is the chance that a real signal would achieve a given score threshold? Results Here we present a novel general approach to estimating these false positive and true positive rates that is significantly more efficient than are existing general approaches. We validate the technique via an implementation within the HMMER 3.0 package, which scans DNA or protein sequence databases for patterns of interest, using a profile-HMM. Conclusion The new approach is faster than general naïve sampling approaches, and more general than other current approaches. It provides an efficient mechanism by which to estimate error statistics for hidden Markov model and hidden Boltzmann model results.

  12. Modeling results for a linear simulator of a divertor

    Energy Technology Data Exchange (ETDEWEB)

    Hooper, E.B.; Brown, M.D.; Byers, J.A.; Casper, T.A.; Cohen, B.I.; Cohen, R.H.; Jackson, M.C.; Kaiser, T.B.; Molvik, A.W.; Nevins, W.M.; Nilson, D.G.; Pearlstein, L.D.; Rognlien, T.D.

    1993-06-23

    A divertor simulator, IDEAL, has been proposed by S. Cohen to study the difficult power-handling requirements of the tokamak program in general and the ITER program in particular. Projections of the power density in the ITER divertor reach {approximately} 1 Gw/m{sup 2} along the magnetic fieldlines and > 10 MW/m{sup 2} on a surface inclined at a shallow angle to the fieldlines. These power densities are substantially greater than can be handled reliably on the surface, so new techniques are required to reduce the power density to a reasonable level. Although the divertor physics must be demonstrated in tokamaks, a linear device could contribute to the development because of its flexibility, the easy access to the plasma and to tested components, and long pulse operation (essentially cw). However, a decision to build a simulator requires not just the recognition of its programmatic value, but also confidence that it can meet the required parameters at an affordable cost. Accordingly, as reported here, it was decided to examine the physics of the proposed device, including kinetic effects resulting from the intense heating required to reach the plasma parameters, and to conduct an independent cost estimate. The detailed role of the simulator in a divertor program is not explored in this report.

  13. Modeling results for a linear simulator of a divertor

    International Nuclear Information System (INIS)

    Hooper, E.B.; Brown, M.D.; Byers, J.A.; Casper, T.A.; Cohen, B.I.; Cohen, R.H.; Jackson, M.C.; Kaiser, T.B.; Molvik, A.W.; Nevins, W.M.; Nilson, D.G.; Pearlstein, L.D.; Rognlien, T.D.

    1993-01-01

    A divertor simulator, IDEAL, has been proposed by S. Cohen to study the difficult power-handling requirements of the tokamak program in general and the ITER program in particular. Projections of the power density in the ITER divertor reach ∼ 1 Gw/m 2 along the magnetic fieldlines and > 10 MW/m 2 on a surface inclined at a shallow angle to the fieldlines. These power densities are substantially greater than can be handled reliably on the surface, so new techniques are required to reduce the power density to a reasonable level. Although the divertor physics must be demonstrated in tokamaks, a linear device could contribute to the development because of its flexibility, the easy access to the plasma and to tested components, and long pulse operation (essentially cw). However, a decision to build a simulator requires not just the recognition of its programmatic value, but also confidence that it can meet the required parameters at an affordable cost. Accordingly, as reported here, it was decided to examine the physics of the proposed device, including kinetic effects resulting from the intense heating required to reach the plasma parameters, and to conduct an independent cost estimate. The detailed role of the simulator in a divertor program is not explored in this report

  14. Children's reaction to depictions of healthy foods in fast-food television advertisements.

    Science.gov (United States)

    Bernhardt, Amy M; Wilking, Cara; Gottlieb, Mark; Emond, Jennifer; Sargent, James D

    2014-05-01

    Since 2009, quick-service restaurant chains, or fast-food companies, have agreed to depict healthy foods in their advertising targeted at children. To determine how children interpreted depictions of milk and apples in television advertisements for children's meals by McDonald's and Burger King (BK) restaurants. Descriptive qualitative study in a rural pediatric practice setting in Northern New England. A convenience sample of 99 children (age range, 3-7 years) was shown depictions of healthy foods in fast-food advertisements that aired from July 1, 2010, through June 30, 2011. The images from McDonald's and BK showed milk and apples. Children were asked what they saw and not prompted to respond specifically to any aspect of the images. Two still images drawn from advertisements for healthy meals at McDonald's and BK. Children's responses were independently content coded to food category by 2 researchers. Among the 99 children participating, only 51 (52%) and 69 (70%) correctly identified milk from the McDonald's and BK images, respectively, with a significantly greater percentage correct (P = .02 for both) among older children. The children's recall of apples was significantly different by restaurant, with 79 (80%) mentioning apples when describing the McDonald's image and only 10 (10%) for the BK image (P children (81%) recalled french fries after viewing the BK advertisement. Of the 4 healthy food images, only depiction of apples by McDonald's was communicated adequately to the target audience. Representations of milk were inadequately communicated to preliterate children. Televised depictions of apple slices by BK misled the children in this study, although no action was taken by government or self-regulatory bodies.

  15. [Colloquial terminology in German depicting mentally ill and odd people. Etymologic-sociolinguistic review].

    Science.gov (United States)

    Carius, D; Steinberg, H

    2000-10-01

    This paper investigates the picture of the mentally ill in German colloquial language. The empirically collected single words and phrases were subject to systematic semantical, linguo-historical as well as etymological investigations, the results of which were then contrasted with selected psychiatric concepts of the 18th/19th century. Most of the words found aim at the head or brain which are often compared with a mechanism and regarded as the actual starting point of the disease. Other terms refer to blows or other mechanical impressions as the cause of mental illnesses. There is another group of words depicting weakness or even total loss of mind. Some of the ideas expressed by the words or structures analysed coincide with concepts psychiatrists had in the past. Many of the words even had been terms in psychiatric theory before they became part of the everyday language after having been loaded with negative connotative meanings making them inappropriate for being a scientific term. Some lexemes have been taken over from other languages, above all from English. Language mirrors stigmatisation of mentally ill people by society in an extraordinarily drastic way. Thus the colloquial names for them share the same fate as the words for other--ethnic, sexual, whatsoever--minorities: by pure means of language those people are regarded as somewhat strange, not belonging, something negative one does not wish to have contact with. On the other hand however, there have always been attempts to counter this by replacing negatively connotated words by other, neutral or even positive ones. Thus was the introduction of the new word nervenkrank ("ill in the nerves", cf English brainsick) in the 19th century, making mentally ill people even to bodily ill ones, what meant an enormous enhancement in value for both the patients and the psychiatrists. Today's name Betroffene ("affect-ed") is another example for those attempts. As can be seen from the historical retrospective this had

  16. A video depicting resuscitation did not impact upon patients' decision-making

    Directory of Open Access Journals (Sweden)

    Richardson-Royer C

    2018-02-01

    Full Text Available Caitlin Richardson-Royer,1 Imran Naqvi,1 Christopher Riffel,1 Lawrence Harvey,1 Domonique Smith,1 Dagmawe Ayalew,1 Nasim Motayar,1 Yaw Amoateng-Adjepong,1,2 Constantine A Manthous3 1The Jewish Hospital of Cincinnati, Cincinnati, OH, USA; 2Yale University School of Medicine, New Haven, CT, USA; 3Lawrence & Memorial Hospital, New London, CT, USA Background: Previous studies have demonstrated that video of and scripted information about cardiopulmonary resuscitation (CPR can be deployed during clinician–patient end-of-life discussions. Few studies, however, examine whether video adds to verbal information-sharing. We hypothesized that video augments script-only decision-making. Methods: Patients aged >65 years admitted to hospital wards were randomized to receive evidence-based information (“script” vs. script plus video of simulated CPR and intubation. Patients’ decisions registered in the hospital record, by hospital discharge were compared for the two groups. Results: Fifty script-only intervention patients averaging 77.7 years were compared to 50 script+video patients with a mean age of 74.7 years. Eleven of 50 (22% in each group declined CPR; and an additional three (script vs. four (script+video refused intubation for respiratory failure. There were no differences in sex, self-reported health trajectory, functional limitations, length of stay, or mortality associated with decisions. Conclusion: The rate at which verbally informed hospitalized elders opted out of resuscitation was not impacted by adding a video depiction of CPR. Keywords: end of life, cardiopulmonary resuscitation, CPR, intubation, mechanical ventilation, autonomy

  17. Depictions of 'brain death' in the media: medical and ethical implications.

    Science.gov (United States)

    Daoust, Ariane; Racine, Eric

    2014-04-01

    Debates and controversies have shaped the understanding and the practices related to death determined by neurological criterion (DNC). Confusion about DNC in the public domain could undermine this notion. This confusion could further jeopardise confidence in rigorous death determination procedures, and raise questions about the integrity, sustainability, and legitimacy of modern organ donation practices. We examined the depictions of 'brain death' in major American and Canadian print media to gain insights into possible common sources of confusion about DNC and the relationship between expert and lay views on this crucial concept. We gathered 940 articles, available in electronic databases, published between 2005 and 2009 from high-circulation Canadian and American newspapers containing keywords 'brain dead' or 'brain death'. Articles were systematically examined for content (eg, definitions of brain death and criteria for determination of death) using the NVivo 8 software. Our results showed problematic aspects in American and Canadian media, with some salient differences. DNC was used colloquially in 39% (N=366) of the articles and its medical meaning infrequently defined (2.7%; N=14 in the USA and 3.6%; N=15 in Canada). The neurological criterion for determination of death was mentioned in less than 10% of the articles, and life support in about 20% of the articles. Organ donation issues related to DNC were raised more often in Canadian articles than in American articles (33.5% vs 21.2%; p<0.0001). Further discussion is needed to develop innovative strategies to bridge media representations of DNC with experts' views in connection with organ donation practices.

  18. Comparison of the performance of two indices of trophic status for depicting the status of Pulicat lagoon ecosystem.

    Science.gov (United States)

    Santhanam, Harini; Raj, S Amal; Thanasekaran, K

    2011-10-01

    In the recent years, several indices of trophic status of coastal ecosytems are being used worldwide. However, not all of them can be applied successfully to depict the true trophic status of shallow coastal ecosystems due to their inherent complexities in nutrient circulation and interactions between biotic organisms. The most widely used index is Carlson's Trophic State Index (TSI), while more recently, several environmental indices have been constructed using soft computing techniques such as fuzzy logic. In the present investigation, a comparison of the performances of a conventional trophic state index and a newly developed fuzzy-based trophic state index has been presented in detail. The aim of the work was to highlight the advantages of the newer technique over the existing techniques in light of the inherent variability of both data as well as the sampling procedures undertaken for studying a coastal lagoon ecosystem called Pulicat lagoon in the southeast coast of India. The results of the study have shown that while there are discrepancies in depicting the trophic status of the lagoon using Carlson's index, the newer logic-based index predicted the trophic status accurately which was verified by field assessments. Thus the successful application of a more reliable index to estimate trophic status has been presented.

  19. Ensuring consistent reporting of clinical pharmacy services to enhance reproducibility in practice: an improved version of DEPICT.

    Science.gov (United States)

    Rotta, Inajara; Salgado, Teresa M; Felix, Daniel C; Souza, Thais T; Correr, Cassyano J; Fernandez-Llimos, Fernando

    2015-08-01

    DEPICT (Descriptive Elements of Pharmacist Intervention Characterization Tool) was created in response to the frequently reported issue of poor intervention description across studies assessing the impact of clinical pharmacy activities. The aim of this study was to create an improved version of DEPICT (i.e. DEPICT 2) to better characterize clinical pharmacy services in order to ensure consistent reporting, therefore enhancing reproducibility of interventions in practice. A qualitative approach through a thematic content analysis was performed to identify components of pharmacist interventions described in 269 randomized controlled trials. A preliminary version of DEPICT 2 was applied independently by two authors to a random sample of 85 of the 269 RCTs and reliability determined by the prevalence-adjusted bias-adjusted kappa (PABAK) or the intraclass correlation coefficient (ICC). The final version of DEPICT 2 was compared against DEPICT 1. The final version of DEPICT 2 comprised 146 items and 11 domains. The inter-rater agreement analysis showed that DEPICT presented good to optimal reproducibility, with a mean PABAK value of 0.87 (95% CI 0.85-0.89) and a mean ICC value of 0.88 (95% CI 0.62-1.14). The mean difference between items checked in the two versions (DEPICT 2 - DEPICT 1) was 10.58 (95% CI 9.55-11.61), meaning that approximately 11 more components were identified in the new version of DEPICT. DEPICT 2 is a reliable tool to characterize components of clinical pharmacy services, which should be used to ensure consistent reporting of interventions to allow their reproducibility in practice. © 2015 John Wiley & Sons, Ltd.

  20. PV Performance Modeling Methods and Practices: Results from the 4th PV Performance Modeling Collaborative Workshop.

    Energy Technology Data Exchange (ETDEWEB)

    Stein, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-03-01

    In 2014, the IEA PVPS Task 13 added the PVPMC as a formal activity to its technical work plan for 2014-2017. The goal of this activity is to expand the reach of the PVPMC to a broader international audience and help to reduce PV performance modeling uncertainties worldwide. One of the main deliverables of this activity is to host one or more PVPMC workshops outside the US to foster more international participation within this collaborative group. This report reviews the results of the first in a series of these joint IEA PVPS Task 13/PVPMC workshops. The 4th PV Performance Modeling Collaborative Workshop was held in Cologne, Germany at the headquarters of TÜV Rheinland on October 22-23, 2015.

  1. 3D radiation belt diffusion model results using new empirical models of whistler chorus and hiss

    Science.gov (United States)

    Cunningham, G.; Chen, Y.; Henderson, M. G.; Reeves, G. D.; Tu, W.

    2012-12-01

    3D diffusion codes model the energization, radial transport, and pitch angle scattering due to wave-particle interactions. Diffusion codes are powerful but are limited by the lack of knowledge of the spatial & temporal distribution of waves that drive the interactions for a specific event. We present results from the 3D DREAM model using diffusion coefficients driven by new, activity-dependent, statistical models of chorus and hiss waves. Most 3D codes parameterize the diffusion coefficients or wave amplitudes as functions of magnetic activity indices like Kp, AE, or Dst. These functional representations produce the average value of the wave intensities for a given level of magnetic activity; however, the variability of the wave population at a given activity level is lost with such a representation. Our 3D code makes use of the full sample distributions contained in a set of empirical wave databases (one database for each wave type, including plasmaspheric hiss, lower and upper hand chorus) that were recently produced by our team using CRRES and THEMIS observations. The wave databases store the full probability distribution of observed wave intensity binned by AE, MLT, MLAT and L*. In this presentation, we show results that make use of the wave intensity sample probability distributions for lower-band and upper-band chorus by sampling the distributions stochastically during a representative CRRES-era storm. The sampling of the wave intensity probability distributions produces a collection of possible evolutions of the phase space density, which quantifies the uncertainty in the model predictions caused by the uncertainty of the chorus wave amplitudes for a specific event. A significant issue is the determination of an appropriate model for the spatio-temporal correlations of the wave intensities, since the diffusion coefficients are computed as spatio-temporal averages of the waves over MLT, MLAT and L*. The spatiotemporal correlations cannot be inferred from the

  2. Models og International Entrepreneurship

    DEFF Research Database (Denmark)

    Rask, Morten; Servais, Per

    2015-01-01

    on International Entrepreneurship, and specifically but not exclusively, International New Ventures (INVs). The three resulting ‘meta-models’ depict the activities and loci of such firms, the motivating factors that give rise to such firms and their growth modalities and strategies. These models reflect the merger...... of entrepreneurship and international business into the field of international entrepreneurship....

  3. Depictions of females and males in Mozambican and Victorian (Australia primary mathematics textbooks

    Directory of Open Access Journals (Sweden)

    Adelino Evaristo Murimo

    2007-10-01

    Full Text Available The depiction of females and males in Mozambican Primary Mathematics textbooks for grades 6 and 7 were examined, and comparisons made with Victorian  (Australia textbooks for years 5 and 6. It was found that mathematics learning was portrayed as a  male domain in the Mozambican textbooks, reflecting what used to be the case with Australian texts of the 1970s, although there are some differences between the two countries that may be culturally based. The Victorian textbooks depicted mathematics learning as a domain for all children, and in the majority of categories examined, females and males were distributed fairly evenly. Compared to earlier reported findings, there was a general improvement in the portrayal of females in Victorian textbooks.

  4. Women’s stories implying aspects of anti-Judaism with Christological depiction in Matthew

    Directory of Open Access Journals (Sweden)

    In-Cheol Shin

    2014-10-01

    Full Text Available This study focuses on the women’s stories that imply aspects of anti-Judaism within Matthew’s depiction of Christology, which is called Matthew’s theology. In fact, Matthew’s community opposed the Jewish system and Jewish leaders and parted from its parent body. Even though Matthew’s community was still similar to the Jewish system, it had significant differences as well. The study discusses these aspects of anti-Judaism that appear in the woman’s stories that include the genealogy of Jesus, the haemorrhaging woman, the Canaanite woman, and the women at the cross and Jesus’ tomb. This study shows proof and examples of anti-Judaism within the stories and thoroughly analyses them. Therefore, it can be confirmed that the women’s stories imply aspects of anti-Judaism with Christological depictions by Matthew’s theological tendency.

  5. "What's wrong with grandma?": depictions of Alzheimer's disease in children's storybooks.

    Science.gov (United States)

    Sakai, Erin Y; Carpenter, Brian D; Rieger, Rebecca E

    2012-12-01

    Alzheimer's disease (AD) affects the entire family system, including young children. Yet there are few resources to help children understand AD. Storybooks are used to educate children about other diseases and may be useful in AD as well. In this study, we examined the depiction of AD in 33 English-language children's storybooks written specifically about AD. As a group, storybooks present AD as a brain disease, but provide little information about the diagnostic process or treatments. Clinical presentations are diverse among characters with AD, and no single book presents a comprehensive depiction of the cognitive, behavioral, affective, and functional symptoms of the disease. In fact, the prevalence of some symptoms in this "population" of storybook characters diverges substantially from epidemiological reports. Books designed to familiarize children about AD should be comprehensive and accurate. Current resources, while useful, could be improved to ensure health literacy about AD in young children.

  6. Depiction of the martyrdom of Saint Ignatius Theophorus in the prothesis of Novo Hopovo

    Directory of Open Access Journals (Sweden)

    Popović Milica

    2015-01-01

    Full Text Available In the art of the Christian East, the depictions of the martyrdom of Saint Ignatius Theophorus, bishop of Antioch, can usually be found among the illustrations of the Menologion. The scene from the monastery of Novo Hopovo, dated to the 1600s, is one of the rare independent depictions of Saint Ignatius’s martyrdom. The paper discusses the iconography of this scene and possible reasons for placing it in the prothesis of the katholikon of Novo Hopovo. The inclusion of a scene showing the martyrdom of the bishop of Antioch into the thematic repertoire of this compartment is a solitary example in Serbian medieval and Byzantine monumental painting. [Projekat Ministarstva nauke Republike Srbije, br. 177036: Srpska srednjovekovna umetnost i njen evropski kontekst

  7. Maria Angelina Doukaina Palaiologina and her depictions in post-byzantine mural paintings

    OpenAIRE

    Agoritsas Demetrios C.

    2014-01-01

    The Serbian Despot of Ioannina Thomas Preljubović and his wife Maria Angelina Doukaina Palaiologina were frequently connected with religious endowments and artefacts that were donated in churches and monasteries. One of them, an icon of the “Doubting Thomas” with the depiction of Maria Palaiologina among the Apostles, was donated by Maria to the monastery of Metamorphosis (Great Meteoron) most probably in the memory of her husband Thomas. This rare iconogra...

  8. Is exposure to online content depicting risky behavior related to viewers' own risky behavior offline?

    OpenAIRE

    Branley, Dawn; Covey, Judith

    2017-01-01

    There are public and governmental concerns that social media may encourage risky behavior in the offline environment. Using international survey data from 412 young adults aged between 18 and 25 years of age (M = 21.20 years, SD = 2.31 years), this study demonstrates that there is a relationship between exposure to online content depicting risky behavior and users’ own offline risky behavior. This relationship was found for six behaviors: drug use, excessive alcohol use, disordered eating, se...

  9. Framing Mass Shootings: Fictional Depictions of Real-life Gun Massacres in American Cinema

    OpenAIRE

    Tryggeseid, Ane Johannessen

    2017-01-01

    This thesis examines the concept of real-life mass shootings and its depiction in American fictional cinema. The issue of mass shootings is a highly controversial subject of discussion, both within the public and political sphere, as it necessarily touches upon rigid perceptions of civil liberties – specifically those of the Second Amendment – which further permeates the field of fictional cinema. As opposed to assessing the issue of mass shootings as a product of a prevailing culture of guns...

  10. Methodological issues in the study of the depiction of cast shadows

    OpenAIRE

    Casati, Roberto

    2003-01-01

    The relationships between art and cognition constitute a very wide set of largely unexplored and at times undefined or much too speculative problems. The field is narrowed down by imposing some constraints. It is proposed that the depiction of cast shadows, in its early history, could provide an ideal case study which conforms to the constraints. This paper addresses some methodological problems of the study of this case. A sample of relevant Renaissance images is discussed. A typology of dep...

  11. Double-bundle depiction of the anterior cruciate ligament at 3 Tesla

    Energy Technology Data Exchange (ETDEWEB)

    Adriaensen, M.E.A.P.M. [Atrium Medical Center Parkstad, Department of Radiology, Heerlen (Netherlands); Hogan, B. [Sports Surgery Clinic, Department of Radiology, Dublin (Ireland); Al-Bulushi, H.I.J. [Armed Forces Hospital, Department of Radiology, Muscat (Oman); Kavanagh, E.C. [Mater Misericordiae Hospital, Department of Radiology, Dublin (Ireland)

    2012-07-15

    Magnetic resonance imaging on 3 Tesla (3T MRI) with arthroscopic correlation has proven to adequately identify the anteromedial bundle (AMB) and posterolateral bundle (PLB) in cadaver knees. The purpose of this study was to describe the depiction of ACL bundle anatomy on 3T MRI in daily practice. In a retrospective cohort study, we included 50 consecutive patients who underwent standard 3T MRI of the knee and had an intact ACL. Two musculoskeletal radiologists independently reviewed all scans for depiction of ACL bundle anatomy using standardized forms. Descriptive statistics were used. Twenty-three right knees (46%) and 27 left knees (54%) were included in the study. Mean age of the patients was 35 years (range 12 to 68 years); 37 patients were male (74%). ACL bundle anatomy was best depicted in the axial plane in 44 knees (88%) and in the coronal plane in six knees (12%). Two bundles were seen in 47 knees (94%). The AMB was completely seen in 45 knees (90%). The PLB was completely seen in 40 knees (80%). Both bundles were completely seen in 37 knees (76%). The double-bundle anatomy of the ACL is visualized in 94% of patients on 3T MRI. Because of potentially associated clinical benefits, we advocate to report separately on the anteromedial bundle and posterolateral bundle in case of anterior cruciate ligament injury of the knee. (orig.)

  12. Moonstruck: How Realistic Is The Moon Depicted In Classic Science Fiction Films?

    Science.gov (United States)

    Jalufka, Dona A.; Koeberl, Christian

    Classical science fiction films have been depicting space voyages, aliens, trips to the moon, the sun, Mars, and other planets, known and unknown. While it is difficult to critique the depiction of fantastic places, or planets about which little was known at the time, the situation is different for the moon, about which a lot of facts were known from astronomical observations even at the turn of the century. Here we discuss the grade of realism with which the lunar surface has been depicted in a number of movies, beginning with George Méliés' 1902 classic Le Voyage dans la lune and ending, just before the first manned landing on the moon, with Stanley Kubrick's 2001: A Space Odyssey. Many of the movies present thoughtful details regarding the actual space travel (rockets), but none of the movies discussed here is entirely realistic in its portrayal of the lunar surface. The blunders range from obvious mistakes, such as the presence of a breathable atmosphere, or spiders and other lunar creatures, to the persistent vertical exaggeration of the height and roughness of lunar mountains. This is surprising, as the lunar topography was already well understood even early in the 20th century.

  13. Reflexivity and exploring the meaning of delirium through media depictions: Methodological insights from a phenomenological study.

    Science.gov (United States)

    Day, Jenny; Higgins, Isabel

    2016-03-01

    In the course of a phenomenological study that explored the experiences of family members during their older loved one's delirium, a range of delirium experiences depicted in artistic, creative, and linguistic media were reviewed. The search for, and compilation of, media sources for reflection during data analysis is described in this paper. In doing so, the researcher reveals how attentiveness and openness to varied depictions of lived experiences, as well as a valuing attitude toward challenging subjective perspectives, can enhance researcher reflexivity and appreciation of interpretive meanings. Turning to media depictions of delirium offered alternative perspectives on the experience. It challenged the researcher's assumptions, enhanced phenomenological reflection, promoted critique of evolving interpretations, and suggested meanings that might not have otherwise been realized. The approach used is a potent, although often overlooked, way to differentiate the nature of phenomena shared through lived experience data. Media-based methods and their use in phenomenology continue to be explored. Illustrations of how to integrate media sources, as well as discussion about the benefits and alternatives to more common uses, are needed. © 2015 Wiley Publishing Asia Pty Ltd.

  14. Effects of Photo-Depicted Pupil Diameter on Judgments of Others' Attentiveness and on Facial Recognition Memory.

    Science.gov (United States)

    Watier, Nicholas; Healy, Christopher; Armstrong, Heather

    2017-04-01

    Occasionally, individuals perceive that someone is no longer paying attention to the discussion at hand even when there are no overt cues of inattentiveness. As a preliminary study of this phenomenon, we examined whether pupil diameter might be implicitly used to infer others' attentiveness. Forty participants (27 women, 13 men, M age = 19.7 year, SD = 2.8) were presented with images of male faces with either large or small pupils, and, in the context of a personnel selection scenario, participants then judged the attentiveness of the person in the image. Images of faces with large pupils were judged as more attentive, compared with images of faces with small pupils. Face recognition memory performance was not affected by depicted pupil size. Our results are consistent with the proposal that pupillary fluctuations can be an index of perceived attention, and they provide preliminary evidence that pupil dilation may be implicitly relied upon to infer attentional states.

  15. Constraining performance assessment models with tracer test results: a comparison between two conceptual models

    Science.gov (United States)

    McKenna, Sean A.; Selroos, Jan-Olof

    Tracer tests are conducted to ascertain solute transport parameters of a single rock feature over a 5-m transport pathway. Two different conceptualizations of double-porosity solute transport provide estimates of the tracer breakthrough curves. One of the conceptualizations (single-rate) employs a single effective diffusion coefficient in a matrix with infinite penetration depth. However, the tracer retention between different flow paths can vary as the ratio of flow-wetted surface to flow rate differs between the path lines. The other conceptualization (multirate) employs a continuous distribution of multiple diffusion rate coefficients in a matrix with variable, yet finite, capacity. Application of these two models with the parameters estimated on the tracer test breakthrough curves produces transport results that differ by orders of magnitude in peak concentration and time to peak concentration at the performance assessment (PA) time and length scales (100,000 years and 1,000 m). These differences are examined by calculating the time limits for the diffusive capacity to act as an infinite medium. These limits are compared across both conceptual models and also against characteristic times for diffusion at both the tracer test and PA scales. Additionally, the differences between the models are examined by re-estimating parameters for the multirate model from the traditional double-porosity model results at the PA scale. Results indicate that for each model the amount of the diffusive capacity that acts as an infinite medium over the specified time scale explains the differences between the model results and that tracer tests alone cannot provide reliable estimates of transport parameters for the PA scale. Results of Monte Carlo runs of the transport models with varying travel times and path lengths show consistent results between models and suggest that the variation in flow-wetted surface to flow rate along path lines is insignificant relative to variability in

  16. MSFC Stream Model Preliminary Results: Modeling Recent Leonid and Perseid Encounters

    Science.gov (United States)

    Cooke, William J.; Moser, Danielle E.

    2004-01-01

    The cometary meteoroid ejection model of Jones and Brown (1996b) was used to simulate ejection from comets 55P/Tempel-Tuttle during the last 12 revolutions, and the last 9 apparitions of 109P/Swift-Tuttle. Using cometary ephemerides generated by the Jet Propulsion Laboratory s (JPL) HORIZONS Solar System Data and Ephemeris Computation Service, two independent ejection schemes were simulated. In the first case, ejection was simulated in 1 hour time steps along the comet s orbit while it was within 2.5 AU of the Sun. In the second case, ejection was simulated to occur at the hour the comet reached perihelion. A 4th order variable step-size Runge-Kutta integrator was then used to integrate meteoroid position and velocity forward in time, accounting for the effects of radiation pressure, Poynting-Robertson drag, and the gravitational forces of the planets, which were computed using JPL s DE406 planetary ephemerides. An impact parameter was computed for each particle approaching the Earth to create a flux profile, and the results compared to observations of the 1998 and 1999 Leonid showers, and the 1993 and 2004 Perseids.

  17. Dermal uptake of phthalates from clothing: Comparison of model to human participant results

    DEFF Research Database (Denmark)

    Morrison, G. C.; Weschler, Charles J.; Beko, G.

    2017-01-01

    In this research, we extend a model of transdermal uptake of phthalates to include a layer of clothing. When compared with experimental results, this model better estimates dermal uptake of diethylphthalate and di-n-butylphthalate (DnBP) than a previous model. The model predictions are consistent...

  18. Da vinci coding? Using renaissance artists' depictions of the brain to engage student interest in neuroanatomy.

    Science.gov (United States)

    Watson, Todd D

    2013-01-01

    This report describes a pair of brief, interactive classroom exercises utilizing Renaissance artists' depictions of the brain to help increase student interest in learning basic neuroanatomy. Undergraduate students provided anonymous quantitative evaluations of both exercises. The feedback data suggest that students found both exercises engaging. The data also suggest that the first exercise increased student interest in learning more about neuroanatomy in general, while the second provided useful practice in identifying major neuroanatomical structures. Overall, the data suggest that these exercises may be a useful addition to courses that introduce or review neuroanatomical concepts.

  19. Mary Queen of Scots as Feminine and National Icon: Depictions in Film and Fiction

    OpenAIRE

    Ágústsdóttir, Ingibjörg

    2013-01-01

    This article focuses on twentieth and twenty-first century depictions of Mary Queen of Scots in film and fiction. It examines the ways in which Mary’s story is presented and in what manner the myths surrounding her personality and actions are either upheld or deconstructed. While the article demonstrates that modern portrayals of Mary tend to follow the long tradition of seeing her as a version of femininity, Mary’s position as a symbol of the victimization of Scotland by England is also disc...

  20. Extended duration orbiter (EDO) with spacelab module depicted in art concept

    Science.gov (United States)

    1992-01-01

    This cutaway drawing depicts a typical Extended Duration Orbiter (EDO) configuration with the EDO cryogenic (CRYO) pallet mounted in the aft end of the payload bay (PLB) behind the Spacelab (SL) module. This pallet carries the extra cryogenic fuel (hydrogen and oxygen) required to extend the space shuttle orbiter's stay time onorbit to 16 days plus two weather days. Also shown directly behind the crew cabin and in front of the SL module is an expanded tunnel adapter which is a possible option on how to increase available stowage volume for extended missions.

  1. Da Vinci Coding? Using Renaissance Artists’ Depictions of the Brain to Engage Student Interest in Neuroanatomy

    Science.gov (United States)

    Watson, Todd D.

    2013-01-01

    This report describes a pair of brief, interactive classroom exercises utilizing Renaissance artists’ depictions of the brain to help increase student interest in learning basic neuroanatomy. Undergraduate students provided anonymous quantitative evaluations of both exercises. The feedback data suggest that students found both exercises engaging. The data also suggest that the first exercise increased student interest in learning more about neuroanatomy in general, while the second provided useful practice in identifying major neuroanatomical structures. Overall, the data suggest that these exercises may be a useful addition to courses that introduce or review neuroanatomical concepts. PMID:23805058

  2. Regression mixture models : Does modeling the covariance between independent variables and latent classes improve the results?

    NARCIS (Netherlands)

    Lamont, A.E.; Vermunt, J.K.; Van Horn, M.L.

    2016-01-01

    Regression mixture models are increasingly used as an exploratory approach to identify heterogeneity in the effects of a predictor on an outcome. In this simulation study, we tested the effects of violating an implicit assumption often made in these models; that is, independent variables in the

  3. Modeling drifting snow in Antarctica with a regional climate model: 2. Results

    NARCIS (Netherlands)

    Lenaerts, J.T.M.; van den Broeke, M.R.

    2012-01-01

    This paper presents a model study of the impact of drifting snow on the lower atmosphere, surface snow characteristics, and surface mass balance of Antarctica. We use the regional atmospheric climate model RACMO2.1/ANT with a high horizontal resolution (27 km), equipped with a drifting snow routine

  4. Comparison of model results obtained with several European regional air quality models

    NARCIS (Netherlands)

    Hass, H.; Builtjes, P.J.H.; Simpson, D.; Stern, R.

    1997-01-01

    An intercomparison study has been performed with four photo-oxidant dispersion models (EMEP, EURAD, LOTOS and REM3) which are currently capable of performing photo-oxidant formation calculations over larger path of Europe. The models, in principle, were run in the mode in which they are normally

  5. The MARINA model (Model to Assess River Inputs of Nutrients to seAs): Model description and results for China.

    Science.gov (United States)

    Strokal, Maryna; Kroeze, Carolien; Wang, Mengru; Bai, Zhaohai; Ma, Lin

    2016-08-15

    Chinese agriculture has been developing fast towards industrial food production systems that discharge nutrient-rich wastewater into rivers. As a result, nutrient export by rivers has been increasing, resulting in coastal water pollution. We developed a Model to Assess River Inputs of Nutrients to seAs (MARINA) for China. The MARINA Nutrient Model quantifies river export of nutrients by source at the sub-basin scale as a function of human activities on land. MARINA is a downscaled version for China of the Global NEWS-2 (Nutrient Export from WaterSheds) model with an improved approach for nutrient losses from animal production and population. We use the model to quantify dissolved inorganic and organic nitrogen (N) and phosphorus (P) export by six large rivers draining into the Bohai Gulf (Yellow, Hai, Liao), Yellow Sea (Yangtze, Huai) and South China Sea (Pearl) in 1970, 2000 and 2050. We addressed uncertainties in the MARINA Nutrient model. Between 1970 and 2000 river export of dissolved N and P increased by a factor of 2-8 depending on sea and nutrient form. Thus, the risk for coastal eutrophication increased. Direct losses of manure to rivers contribute to 60-78% of nutrient inputs to the Bohai Gulf and 20-74% of nutrient inputs to the other seas in 2000. Sewage is an important source of dissolved inorganic P, and synthetic fertilizers of dissolved inorganic N. Over half of the nutrients exported by the Yangtze and Pearl rivers originated from human activities in downstream and middlestream sub-basins. The Yellow River exported up to 70% of dissolved inorganic N and P from downstream sub-basins and of dissolved organic N and P from middlestream sub-basins. Rivers draining into the Bohai Gulf are drier, and thus transport fewer nutrients. For the future we calculate further increases in river export of nutrients. The MARINA Nutrient model quantifies the main sources of coastal water pollution for sub-basins. This information can contribute to formulation of

  6. Report on the results of studies on revised ECCS evaluation models for LWR power plants

    International Nuclear Information System (INIS)

    1978-01-01

    For evaluating the function and performance of emergency core cooling systems of LWR power plants, the use of the ECCS evaluation models of GE and westinghouse are permitted. For the models, however, the formulae of correlation with higher accuracy were developed along with the accumulation of results of experimental and theoretical studies in the field. Revision to the models has thus been proposed on the basis of the results of researches both in Japan and abroad. Such alterations and the results of the studies thereon are described. The following matters are described: on the evaluation models for BWR ECCS, CCFL model, low flow rate film boiling heat transfer coefficient, radiation heat transfer model, and critical flow model; on the evaluation models, for PWR ECCS, heat radiation, between fuel rods, accumulator injection pressure loss in reflooding, rupture of cladding tubes, hot wall delay, model of steam cooling in reflooding 17 x 17 core ELECHT correlation, and temperature at reactor vessel top. (Mori, K.)

  7. The Latest Battle: Depictions of the Calormen in The Chronicles of Narnia

    Directory of Open Access Journals (Sweden)

    Howe Andrew

    2017-12-01

    Full Text Available Two books in C.S. Lewis’s young adult fantasy series Chronicles of Narnia - The Horse and His Boy and The Last Battle - paint an uncomfortable portrait of the Calormen, the traditional foil for the Narnians. Throughout the text, the Calormen are clearly marked both culturally and racially as Middle Eastern, perhaps specifically as Turkish or Arab in their socio-political power structure with harems, arranged marriages, and facial hair designating status. Even Tashbaan, the capital city of Calormen, reads somewhat like a description of Istanbul. Throughout these two books, the Calormen are portrayed as a sinister and conquest-driven culture threatening the freedom enjoyed by Narnia. This textual indictment is fairly consistent. In demonizing this group, Lewis took part in a literary tradition extending back hundreds of years, a tradition that has enjoyed renewed resonance with increased fears over the growth of Islam. From Sir John Mandeville to post-9/11 concerns over terrorism, western depictions of Islam have often revolved around fear and distrust. The Last Battle is particularly problematic in its allegorical depictions of Islam, as Lewis seems to suggest that salvation is only reserved for those who follow the lion Aslan, clearly marked throughout the series as a stand-in for Jesus Christ.

  8. Contemporary Japanese view of life and death as depicted in the film Departures (Okuribito).

    Science.gov (United States)

    Asai, Atsushi; Fukuyama, Miki; Kobayashi, Yasunori

    2010-06-01

    Through films, we can see many aspects of a country and its times: culture, morality and religion, and views on life and death. The best films can both entertain audiences and provide viewers with opportunities to think about fundamental human problems. In this article, we use Departures (Okuribito) to examine the contemporary Japanese view of life and death. All sorts of deaths are depicted and each scene provides an insight into the contemporary Japanese view of death. We use the medium of film to consider the issue of death: what death is, the relationship that exists between life and death, and how the impurity and dignity of the dead are recognised by contemporary Japanese people. The ritual of 'encoffinment' will also be discussed, and what it suggests and reveals about Japanese views on what happens to a person when they die, and what requirements exist for someone to be able to depart from this world to the afterlife. The view of death depicted in Departures is thought to accept and even hope for a worldview that postulates continuity between life and death, wherein not only the soul but also personal individuality continues on as it existed in life. The rite of encoffinment is required to relieve the family's grief as well as to wipe away the impurity of the dead. The Japanese traditional view that the 'dead are impure' seems to die hard. It is also suggested that complicated and ambivalent attitudes towards the dead exist among contemporary Japanese people.

  9. Channel Verification Results for the SCME models in a Multi-Probe Based MIMO OTA Setup

    DEFF Research Database (Denmark)

    Fan, Wei; Carreño, Xavier; S. Ashta, Jagjit

    2013-01-01

    , where the focus is on comparing results from various proposed methods. Channel model verification is necessary to ensure that the target channel models are correctly implemented inside the test area. This paper shows that the all the key parameters of the SCME models, i.e., power delay profile, temporal...

  10. Photovoltaic Grid-Connected Modeling and Characterization Based on Experimental Results

    Science.gov (United States)

    Humada, Ali M.; Hojabri, Mojgan; Sulaiman, Mohd Herwan Bin; Hamada, Hussein M.; Ahmed, Mushtaq N.

    2016-01-01

    A grid-connected photovoltaic (PV) system operates under fluctuated weather condition has been modeled and characterized based on specific test bed. A mathematical model of a small-scale PV system has been developed mainly for residential usage, and the potential results have been simulated. The proposed PV model based on three PV parameters, which are the photocurrent, IL, the reverse diode saturation current, Io, the ideality factor of diode, n. Accuracy of the proposed model and its parameters evaluated based on different benchmarks. The results showed that the proposed model fitting the experimental results with high accuracy compare to the other models, as well as the I-V characteristic curve. The results of this study can be considered valuable in terms of the installation of a grid-connected PV system in fluctuated climatic conditions. PMID:27035575

  11. Capturing change: the duality of time-lapse imagery to acquire data and depict ecological dynamics

    Science.gov (United States)

    Brinley Buckley, Emma M.; Allen, Craig R.; Forsberg, Michael; Farrell, Michael; Caven, Andrew J.

    2017-01-01

    We investigate the scientific and communicative value of time-lapse imagery by exploring applications for data collection and visualization. Time-lapse imagery has a myriad of possible applications to study and depict ecosystems and can operate at unique temporal and spatial scales to bridge the gap between large-scale satellite imagery projects and observational field research. Time-lapse data sequences, linking time-lapse imagery with data visualization, have the ability to make data come alive for a wider audience by connecting abstract numbers to images that root data in time and place. Utilizing imagery from the Platte Basin Timelapse Project, water inundation and vegetation phenology metrics are quantified via image analysis and then paired with passive monitoring data, including streamflow and water chemistry. Dynamic and interactive time-lapse data sequences elucidate the visible and invisible ecological dynamics of a significantly altered yet internationally important river system in central Nebraska.

  12. Adversarial Framing: President Bashar al-Assad’s Depiction of the Armed Syrian Opposition

    Directory of Open Access Journals (Sweden)

    Fabien Merz

    2014-06-01

    Full Text Available 'This paper evaluates how Syrian president Bashar al-Assad is framing his opponents in the context of the Syrian civil war. The question is addressed by conducting a qualitative thematic analysis of 13 interviews he gave to international television news networks and newspapers between March and November 2013. It is found that Al-Assad consequently labels the armed opposition as “terrorists” preponderantly composed of groups affiliated to Al-Qaeda. The “terrorists” are framed as posing a threat to the region as well as to international security on a global scale. Furthermore, Al-Assad denies the armed opposition its Syrian grassroots by portraying them as outside aggressors fighting for foreign interests. They are also depicted as “enemies of the Syrian people”, responsible for all the atrocities and human suffering committed during the Syrian civil war.' ' '

  13. Maria Angelina Doukaina Palaiologina and her depictions in post-byzantine mural paintings

    Directory of Open Access Journals (Sweden)

    Agoritsas Demetrios C.

    2014-01-01

    Full Text Available The Serbian Despot of Ioannina Thomas Preljubović and his wife Maria Angelina Doukaina Palaiologina were frequently connected with religious endowments and artefacts that were donated in churches and monasteries. One of them, an icon of the “Doubting Thomas” with the depiction of Maria Palaiologina among the Apostles, was donated by Maria to the monastery of Metamorphosis (Great Meteoron most probably in the memory of her husband Thomas. This rare iconographic type is traced in post-byzantine painted monuments in Epirus, Thessaly and Macedonia from the sixteenth to the eighteenth century. The transmis­sion of the above iconography is due to the spiritual and artistic influence of two important monastic centers, the Philanthropenos monastery in Ioannina and the Varlaam monastery in Meteora region, whose founders - the Philanthropenos and Apsaras families - were strongly connected to the Serbian rulers of Ioannina and especially Maria Palaiologina.

  14. Capturing change: the duality of time-lapse imagery to acquire data and depict ecological dynamics

    Directory of Open Access Journals (Sweden)

    Emma M. Brinley Buckley

    2017-09-01

    Full Text Available We investigate the scientific and communicative value of time-lapse imagery by exploring applications for data collection and visualization. Time-lapse imagery has a myriad of possible applications to study and depict ecosystems and can operate at unique temporal and spatial scales to bridge the gap between large-scale satellite imagery projects and observational field research. Time-lapse data sequences, linking time-lapse imagery with data visualization, have the ability to make data come alive for a wider audience by connecting abstract numbers to images that root data in time and place. Utilizing imagery from the Platte Basin Timelapse Project, water inundation and vegetation phenology metrics are quantified via image analysis and then paired with passive monitoring data, including streamflow and water chemistry. Dynamic and interactive time-lapse data sequences elucidate the visible and invisible ecological dynamics of a significantly altered yet internationally important river system in central Nebraska.

  15. Norfolk Harbor and Channels Deepening Study. Report 1. Physical Model Results. Chesapeake Bay Hydraulic Model Investigation.

    Science.gov (United States)

    1983-06-01

    These mechanisms consist of a feedback system that is entirely self-contained and is not dependent on computer feedback for adjustment. The system...reproducing a variable hydro- graph freshwater inflow through the use of positive feedback control of river discharges. Fresh water normally enters the model...juni of the I IOW patter-1 it Lte in, aI t he )Jillls . ’Ihe othle r t o .Lames ranges , JN02 arnd JG63 , show s I i gilt dt-( I 1ae 1. IAm If I I iti

  16. A regional climate model for northern Europe: model description and results from the downscaling of two GCM control simulations

    Science.gov (United States)

    Rummukainen, M.; Räisänen, J.; Bringfelt, B.; Ullerstig, A.; Omstedt, A.; Willén, U.; Hansson, U.; Jones, C.

    This work presents a regional climate model, the Rossby Centre regional Atmospheric model (RCA1), recently developed from the High Resolution Limited Area Model (HIRLAM). The changes in the HIRLAM parametrizations, necessary for climate-length integrations, are described. A regional Baltic Sea ocean model and a modeling system for the Nordic inland lake systems have been coupled with RCA1. The coupled system has been used to downscale 10-year time slices from two different general circulation model (GCM) simulations to provide high-resolution regional interpretation of large-scale modeling. A selection of the results from the control runs, i.e. the present-day climate simulations, are presented: large-scale free atmospheric fields, the surface temperature and precipitation results and results for the on-line simulated regional ocean and lake surface climates. The regional model modifies the surface climate description compared to the GCM simulations, but it is also substantially affected by the biases in the GCM simulations. The regional model also improves the representation of the regional ocean and the inland lakes, compared to the GCM results.

  17. A regional climate model for northern Europe: model description and results from the downscaling of two GCM control simulations

    Energy Technology Data Exchange (ETDEWEB)

    Rummukainen, M.; Raeisaenen, J.; Bringfelt, B.; Ullerstig, A.; Omstedt, A.; Willen, U.; Hansson, U.; Jones, C. [Rossby Centre, Swedish Meteorological and Hydrological Inst., Norrkoeping (Sweden)

    2001-03-01

    This work presents a regional climate model, the Rossby Centre regional Atmospheric model (RCA1), recently developed from the High Resolution Limited Area Model (HIRLAM). The changes in the HIRLAM parametrizations, necessary for climate-length integrations, are described. A regional Baltic Sea ocean model and a modeling system for the Nordic inland lake systems have been coupled with RCA1. The coupled system has been used to downscale 10-year time slices from two different general circulation model (GCM) simulations to provide high-resolution regional interpretation of large-scale modeling. A selection of the results from the control runs, i.e. the present-day climate simulations, are presented: large-scale free atmospheric fields, the surface temperature and precipitation results and results for the on-line simulated regional ocean and lake surface climates. The regional model modifies the surface climate description compared to the GCM simulations, but it is also substantially affected by the biases in the GCM simulations. The regional model also improves the representation of the regional ocean and the inland lakes, compared to the GCM results. (orig.)

  18. Study on driver model for hybrid truck based on driving simulator experimental results

    Directory of Open Access Journals (Sweden)

    Dam Hoang Phuc

    2018-04-01

    Full Text Available In this paper, a proposed car-following driver model taking into account some features of both the compensatory and anticipatory model representing the human pedal operation has been verified by driving simulator experiments with several real drivers. The comparison between computer simulations performed by determined model parameters with the experimental results confirm the correctness of this mathematical driver model and identified model parameters. Then the driver model is joined to a hybrid vehicle dynamics model and the moderate car following maneuver simulations with various driver parameters are conducted to investigate influences of driver parameters on vehicle dynamics response and fuel economy. Finally, major driver parameters involved in the longitudinal control of drivers are clarified. Keywords: Driver model, Driver-vehicle closed-loop system, Car Following, Driving simulator/hybrid electric vehicle (B1

  19. Automated detection and analysis of fluorescent in situ hybridization spots depicted in digital microscopic images of Pap-smear specimens

    Science.gov (United States)

    Wang, Xingwei; Zheng, Bin; Li, Shibo; Zhang, Roy; Mulvihill, John J.; Chen, Wei R.; Liu, Hong

    2009-03-01

    Fluorescence in situ hybridization (FISH) technology has been widely recognized as a promising molecular and biomedical optical imaging tool to screen and diagnose cervical cancer. However, manual FISH analysis is time-consuming and may introduce large inter-reader variability. In this study, a computerized scheme is developed and tested. It automatically detects and analyzes FISH spots depicted on microscopic fluorescence images. The scheme includes two stages: (1) a feature-based classification rule to detect useful interphase cells, and (2) a knowledge-based expert classifier to identify splitting FISH spots and improve the accuracy of counting independent FISH spots. The scheme then classifies detected analyzable cells as normal or abnormal. In this study, 150 FISH images were acquired from Pap-smear specimens and examined by both an experienced cytogeneticist and the scheme. The results showed that (1) the agreement between the cytogeneticist and the scheme was 96.9% in classifying between analyzable and unanalyzable cells (Kappa=0.917), and (2) agreements in detecting normal and abnormal cells based on FISH spots were 90.5% and 95.8% with Kappa=0.867. This study demonstrated the feasibility of automated FISH analysis, which may potentially improve detection efficiency and produce more accurate and consistent results than manual FISH analysis.

  20. Some important results from the air pollution distribution model STACKS (1988-1992)

    International Nuclear Information System (INIS)

    Erbrink, J.J.

    1993-01-01

    Attention is paid to the results of the study on the distribution of air pollutants by high chimney-stacks of electric power plants. An important product of the study is the integrated distribution model STACKS (Short Term Air-pollutant Concentrations Kema modelling System). The improvements and the extensions of STACKS are described in relation to the National Model, which has been used to estimate the environmental effects of individual chimney-stacks. The National Model shows unacceptable variations for high pollutant sources. Based on the results of STACKS revision of the National model has been taken into consideration. By means of the revised National Model a more realistic estimation of the environmental effects of electric power plants can be carried out

  1. Radiative effects of a CO2 increase: Results of a model comparison

    International Nuclear Information System (INIS)

    Luther, F.M.

    1992-01-01

    Many infrared (IR) radiative transfer models have been developed that range in complexity from line-by-line calculations to simplified parameterizations used in climate models and general circulation models. Assessment of the potential climatic effects of trace gases such as carbon dioxide requires first an evaluation of the radiative properties of each gas and determination of the perturbation to the radiative fluxes. The most detailed radiative transfer models are well suited for this application. The perturbed radiative fluxes lead to climatic effects that are evaluated using models that couple radiative, dynamic transport, and hydrological processes. Recently, chemical interactions have also been included in the assessments. It is desirable that a better understanding be developed of the differences in model approaches used by various modeling groups and how these differences affect model sensitivity to perturbations such as increased carbon dioxide. Since many factors affect model sensitivity, a practical approach is to start with a comparison of the basic physical processes without feedbacks and couplings, then to build in complexity. Because increases in carbon dioxide leads to radiative forcing, the treatment of radiative processes is a natural starting point for comparison. A comparison of infrared radiative transfer models has begun under the auspices of the US Department of Energy's Carbon Dioxide Research Program. The results of the IR model comparison will be included in the state-of-the-art report on climate modeling

  2. Results and Comparison from the SAM Linear Fresnel Technology Performance Model: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, M. J.

    2012-04-01

    This paper presents the new Linear Fresnel technology performance model in NREL's System Advisor Model. The model predicts the financial and technical performance of direct-steam-generation Linear Fresnel power plants, and can be used to analyze a range of system configurations. This paper presents a brief discussion of the model formulation and motivation, and provides extensive discussion of the model performance and financial results. The Linear Fresnel technology is also compared to other concentrating solar power technologies in both qualitative and quantitative measures. The Linear Fresnel model - developed in conjunction with the Electric Power Research Institute - provides users with the ability to model a variety of solar field layouts, fossil backup configurations, thermal receiver designs, and steam generation conditions. This flexibility aims to encompass current market solutions for the DSG Linear Fresnel technology, which is seeing increasing exposure in fossil plant augmentation and stand-alone power generation applications.

  3. An outcome-based learning model to identify emerging threats : experimental and simulation results.

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Moyano, I. J.; Conrad, S. H.; Andersen, D. F.; Decision and Information Sciences; SNL; Univ. at Albany

    2007-01-01

    The authors present experimental and simulation results of an outcome-based learning model as it applies to the identification of emerging threats. This model integrates judgment, decision making, and learning theories to provide an integrated framework for the behavioral study of emerging threats.

  4. The European Integrated Tokamak Modelling (ITM) effort: achievements and first physics results

    NARCIS (Netherlands)

    G.L. Falchetto,; Coster, D.; Coelho, R.; Scott, B. D.; Figini, L.; Kalupin, D.; Nardon, E.; Nowak, S.; L.L. Alves,; Artaud, J. F.; Basiuk, V.; João P.S. Bizarro,; C. Boulbe,; Dinklage, A.; Farina, D.; B. Faugeras,; Ferreira, J.; Figueiredo, A.; Huynh, P.; Imbeaux, F.; Ivanova-Stanik, I.; Jonsson, T.; H.-J. Klingshirn,; Konz, C.; Kus, A.; Marushchenko, N. B.; Pereverzev, G.; M. Owsiak,; Poli, E.; Peysson, Y.; R. Reimer,; Signoret, J.; Sauter, O.; Stankiewicz, R.; Strand, P.; Voitsekhovitch, I.; Westerhof, E.; T. Zok,; Zwingmann, W.; ITM-TF contributors,; ASDEX Upgrade team,; JET-EFDA Contributors,

    2014-01-01

    A selection of achievements and first physics results are presented of the European Integrated Tokamak Modelling Task Force (EFDA ITM-TF) simulation framework, which aims to provide a standardized platform and an integrated modelling suite of validated numerical codes for the simulation and

  5. The Plumbing of Land Surface Models: Is Poor Performance a Result of Methodology or Data Quality?

    Science.gov (United States)

    Haughton, Ned; Abramowitz, Gab; Pitman, Andy J.; Or, Dani; Best, Martin J.; Johnson, Helen R.; Balsamo, Gianpaolo; Boone, Aaron; Cuntz, Matthais; Decharme, Bertrand; hide

    2016-01-01

    The PALS Land sUrface Model Benchmarking Evaluation pRoject (PLUMBER) illustrated the value of prescribing a priori performance targets in model intercomparisons. It showed that the performance of turbulent energy flux predictions from different land surface models, at a broad range of flux tower sites using common evaluation metrics, was on average worse than relatively simple empirical models. For sensible heat fluxes, all land surface models were outperformed by a linear regression against downward shortwave radiation. For latent heat flux, all land surface models were outperformed by a regression against downward shortwave, surface air temperature and relative humidity. These results are explored here in greater detail and possible causes are investigated. We examine whether particular metrics or sites unduly influence the collated results, whether results change according to time-scale aggregation and whether a lack of energy conservation in fluxtower data gives the empirical models an unfair advantage in the intercomparison. We demonstrate that energy conservation in the observational data is not responsible for these results. We also show that the partitioning between sensible and latent heat fluxes in LSMs, rather than the calculation of available energy, is the cause of the original findings. Finally, we present evidence suggesting that the nature of this partitioning problem is likely shared among all contributing LSMs. While we do not find a single candidate explanation forwhy land surface models perform poorly relative to empirical benchmarks in PLUMBER, we do exclude multiple possible explanations and provide guidance on where future research should focus.

  6. Modelling of water potential and water uptake rate of tomato plants in the greenhouse: preliminary results.

    NARCIS (Netherlands)

    Bruggink, G.T.; Schouwink, H.E.; Gieling, Th.H.

    1988-01-01

    A dynamic model is presented which predicts water potential and water uptake rate of greenhouse tomato plants using transpiration rate as input. The model assumes that water uptake is the resultant of water potential and hydraulic resistance, and that water potential is linearly related to water

  7. Mobile satellite propagation measurements and modeling: A review of results for systems engineers

    Science.gov (United States)

    Stutzman, W. L. (Editor); Barts, R. M.; Bostian, C. W.; Butterworth, J. S.; Campbell, R.; Goldhirsh, J.; Vogel, W. J.

    1988-01-01

    An overview of Mobile Satellite System (MSS) propagation measurements and modeling is given, including a summary of results. The simple models presented should be of some use to systems engineers. A complete summary of propagation experiments with literature references is included.

  8. Predicting ecosystem functioning from plant traits: Results from a multi-scale ecophsiological modeling approach

    NARCIS (Netherlands)

    Wijk, van M.T.

    2007-01-01

    Ecosystem functioning is the result of processes working at a hierarchy of scales. The representation of these processes in a model that is mathematically tractable and ecologically meaningful is a big challenge. In this paper I describe an individual based model (PLACO¿PLAnt COmpetition) that

  9. User's guide to Model Viewer, a program for three-dimensional visualization of ground-water model results

    Science.gov (United States)

    Hsieh, Paul A.; Winston, Richard B.

    2002-01-01

    Model Viewer is a computer program that displays the results of three-dimensional groundwater models. Scalar data (such as hydraulic head or solute concentration) may be displayed as a solid or a set of isosurfaces, using a red-to-blue color spectrum to represent a range of scalar values. Vector data (such as velocity or specific discharge) are represented by lines oriented to the vector direction and scaled to the vector magnitude. Model Viewer can also display pathlines, cells or nodes that represent model features such as streams and wells, and auxiliary graphic objects such as grid lines and coordinate axes. Users may crop the model grid in different orientations to examine the interior structure of the data. For transient simulations, Model Viewer can animate the time evolution of the simulated quantities. The current version (1.0) of Model Viewer runs on Microsoft Windows 95, 98, NT and 2000 operating systems, and supports the following models: MODFLOW-2000, MODFLOW-2000 with the Ground-Water Transport Process, MODFLOW-96, MOC3D (Version 3.5), MODPATH, MT3DMS, and SUTRA (Version 2D3D.1). Model Viewer is designed to directly read input and output files from these models, thus minimizing the need for additional postprocessing. This report provides an overview of Model Viewer. Complete instructions on how to use the software are provided in the on-line help pages.

  10. AFSC/RACE/GAP/Laman: Model Results of Aleutian Island POP distributions

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data supporting the "Model Results of Aleutian Island POP distributions" manuscript are distribution and abundance of Pacific ocean perch from RACEBase,...

  11. Modeling the radiation transfer of discontinuous canopies: results for gap probability and single-scattering contribution

    Science.gov (United States)

    Zhao, Feng; Zou, Kai; Shang, Hong; Ji, Zheng; Zhao, Huijie; Huang, Wenjiang; Li, Cunjun

    2010-10-01

    In this paper we present an analytical model for the computation of radiation transfer of discontinuous vegetation canopies. Some initial results of gap probability and bidirectional gap probability of discontinuous vegetation canopies, which are important parameters determining the radiative environment of the canopies, are given and compared with a 3- D computer simulation model. In the model, negative exponential attenuation of light within individual plant canopies is assumed. Then the computation of gap probability is resolved by determining the entry points and exiting points of the ray with the individual plants via their equations in space. For the bidirectional gap probability, which determines the single-scattering contribution of the canopy, a gap statistical analysis based model was adopted to correct the dependence of gap probabilities for both solar and viewing directions. The model incorporates the structural characteristics, such as plant sizes, leaf size, row spacing, foliage density, planting density, leaf inclination distribution. Available experimental data are inadequate for a complete validation of the model. So it was evaluated with a three dimensional computer simulation model for 3D vegetative scenes, which shows good agreement between these two models' results. This model should be useful to the quantification of light interception and the modeling of bidirectional reflectance distributions of discontinuous canopies.

  12. Planck intermediate results XXIX. All-sky dust modelling with Planck, IRAS, and WISE observations

    DEFF Research Database (Denmark)

    Ade, P. A. R.; Aghanim, N.; Alves, M. I. R.

    2016-01-01

    . The present work extends the DL dust modelling carried out on nearby galaxies using Herschel and Spitzer data to Galactic dust emission. We employ the DL dust model to generate maps of the dust mass surface density Sigma(Md), the dust optical extinction A(V), and the starlight intensity heating the bulk...... grains per unit A(V), and not only in the starlight intensity. These results show that some of the physical assumptions of the DL model will need to be revised. To circumvent the model deficiency, we propose an empirical renormalization of the DL A(V) estimate, dependent of U-min, which compensates...

  13. An annotation of cuts, depicted locations, and temporal progression in the motion picture "Forrest Gump" [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Christian O. Häusler

    2016-09-01

    Full Text Available Here we present an annotation of locations and temporal progression depicted in the movie “Forrest Gump”, as an addition to a large public functional brain imaging dataset (http://studyforrest.org. The annotation provides information about the exact timing of each of the 870 shots, and the depicted location after every cut with a high, medium, and low level of abstraction. Additionally, four classes are used to distinguish the differences of the depicted time between shots. Each shot is also annotated regarding the type of location (interior/exterior and time of day. This annotation enables further studies of visual perception, memory of locations, and the perception of time under conditions of real-life complexity using the studyforrest dataset.

  14. Numerical modelling of radon-222 entry into houses: An outline of techniques and results

    DEFF Research Database (Denmark)

    Andersen, C.E.

    2001-01-01

    Numerical modelling is a powerful tool for studies of soil gas and radon-222 entry into houses. It is the purpose of this paper to review some main techniques and results. In the past, modelling has focused on Darcy flow of soil gas (driven by indoor–outdoor pressure differences) and combined......, fractures, moisture, non-uniform soil temperature, non-Darcy flow of gas, and flow caused by changes in the atmospheric pressure. Numerical models can be used to estimate the importance of specific factors for radon entry. Models are also helpful when results obtained in special laboratory or test structure...... experiments need to be extrapolated to more general situations (e.g. to real houses or even to other soil–gas pollutants). Finally, models provide a cost-effective test bench for improved designs of radon prevention systems. The paper includes a summary of transport equations and boundary conditions...

  15. Modelling lung cancer due to radon and smoking in WISMUT miners: Preliminary results

    International Nuclear Information System (INIS)

    Bijwaard, H.; Dekkers, F.; Van Dillen, T.

    2011-01-01

    A mechanistic two-stage carcinogenesis model has been applied to model lung-cancer mortality in the largest uranium-miner cohort available. Models with and without smoking action both fit the data well. As smoking information is largely missing from the cohort data, a method has been devised to project this information from a case-control study onto the cohort. Model calculations using 256 projections show that the method works well. Preliminary results show that if an explicit smoking action is absent in the model, this is compensated by the values of the baseline parameters. This indicates that in earlier studies performed without smoking information, the results obtained for the radiation parameters are still valid. More importantly, the inclusion of smoking-related parameters shows that these mainly influence the later stages of lung-cancer development. (authors)

  16. RELATIONSHIP BETWEEN ISO 9001 CERTIFICATION MATURITY AND EFQM BUSINESS EXCELLENCE MODEL RESULTS

    Directory of Open Access Journals (Sweden)

    Luis Miguel Fonseca

    2015-07-01

    Full Text Available Purpose: This exploratory research evaluates if there a relationship between the number of years since an organization has achieved ISO 9001 certification and the highest level of recognition received by the same organization with the EFQM Business Excellence Model.Methodology/Approach: After state of the art review a detailed comparison between both models was made. Fifty two Portuguese organizations were considered and Correlation coefficient Spearman Rho was used to investigate the possible relationships.Findings: Conclusion is that there is indeed a moderate positive correlation between these two variables, the higher the number of years of ISO 9001 certification, the higher the results of the organization EFQM model evaluation and recognition. This supports the assumption that ISO 9001 International Standard by incorporating many of the principles present in the EFQM Business Excellence Model is consistent with this model and can be considered as a step towards that direction.Research Limitation/implication: Due to the dynamic nature of these models that might change over time and the possible time delays between implementation and results, more in-depth studies like experimental design or a longitudinal quasi-experimental design could be used to confirm the results of this investigation.Originality/Value of paper: This research gives additional insights on conjunct studies of both models. The use of external evaluation results carried out by the independent EFQM assessors minimizes the possible bias of previous studies accessing the value of ISO 9001 certification.

  17. Radiation Transfer Model Intercomparison (RAMI) exercise: Results from the second phase

    Science.gov (United States)

    Pinty, B.; Widlowski, J.-L.; Taberner, M.; Gobron, N.; Verstraete, M. M.; Disney, M.; Gascon, F.; Gastellu, J.-P.; Jiang, L.; Kuusk, A.; Lewis, P.; Li, X.; Ni-Meister, W.; Nilson, T.; North, P.; Qin, W.; Su, L.; Tang, S.; Thompson, R.; Verhoef, W.; Wang, H.; Wang, J.; Yan, G.; Zang, H.

    2004-03-01

    The Radiation Transfer Model Intercomparison (RAMI) initiative is a community-driven exercise to benchmark the models of radiation transfer (RT) used to represent the reflectance of terrestrial surfaces. Systematic model intercomparisons started in 1999 as a self-organized, open-access, voluntary activity of the RT modeling community. The results of the first phase were published by [2001]. The present paper describes the benchmarking protocol and the results achieved during the second phase, which took place during 2002. This second phase included two major components: The first one included a rerun of all direct-mode tests proposed during the first phase, to accommodate the evaluation of models that have been upgraded since, and the participation of new models into the entire exercise. The second component was designed to probe the performance of three-dimensional models in complex heterogeneous environments, which closely mimic the observations of actual space instruments operating at various spatial resolutions over forest canopy systems. Phases 1 and 2 of RAMI both confirm not only that a majority of the radiation transfer models participating in RAMI are in good agreement between themselves for relatively simple radiation transfer problems but also that these models exhibit significant discrepancies when considering more complex but nevertheless realistic geophysical scenarios. Specific recommendations are provided to guide the future of this benchmarking program (Phase 3 and beyond).

  18. [Analysis of the model OPM3®application and results for health area].

    Science.gov (United States)

    Augusto Dos Santos, Luis; de Fátima Marin, Heimar

    2011-01-01

    This research sought to analyze if a questionnaire model created by an international community of project management is applicable to health organizations. The model OPM3 ® (Organizational Project Management Maturity Model) was created in order that organizations of any area or size can identify the presence or absence of good management practices. The aim of applying this model is to always evaluate the organization and not the interviewee. In this paper, one presents the results of employing this model in an organization that has information technology products and services applied to health area. This study verified that the model is rapidly applicable and that the analyzed organization has an expressive number of good practices.

  19. A New Explanation and Proof of the Paradoxical Scoring Results in Multidimensional Item Response Models.

    Science.gov (United States)

    Jordan, Pascal; Spiess, Martin

    2017-10-13

    In multidimensional item response models, paradoxical scoring effects can arise, wherein correct answers are penalized and incorrect answers are rewarded. For the most prominent class of IRT models, the class of linearly compensatory models, a general derivation of paradoxical scoring effects based on the geometry of item discrimination vectors is given, which furthermore corrects an error in an established theorem on paradoxical results. This approach highlights the very counterintuitive way in which item discrimination parameters (and also factor loadings) have to be interpreted in terms of their influence on the latent ability estimate. It is proven that, despite the error in the original proof, the key result concerning the existence of paradoxical effects remains true-although the actual relation to the item parameters is shown to be a more complicated function than previous results suggested. The new proof enables further insights into the actual mathematical causation of the paradox and generalizes the findings within the class of linearly compensatory models.

  20. Influence of delayed neutron parameter calculation accuracy on results of modeled WWER scram experiments

    International Nuclear Information System (INIS)

    Artemov, V.G.; Gusev, V.I.; Zinatullin, R.E.; Karpov, A.S.

    2007-01-01

    Using modeled WWER cram rod drop experiments, performed at the Rostov NPP, as an example, the influence of delayed neutron parameters on the modeling results was investigated. The delayed neutron parameter values were taken from both domestic and foreign nuclear databases. Numerical modeling was carried out on the basis of SAPFIR 9 5andWWERrogram package. Parameters of delayed neutrons were acquired from ENDF/B-VI and BNAB-78 validated data files. It was demonstrated that using delay fraction data from different databases in reactivity meters led to significantly different reactivity results. Based on the results of numerically modeled experiments, delayed neutron parameters providing the best agreement between calculated and measured data were selected and recommended for use in reactor calculations (Authors)

  1. A Tower Model for Lightning Overvoltage Studies Based on the Result of an FDTD Simulation

    Science.gov (United States)

    Noda, Taku

    This paper describes a method for deriving a transmission tower model for EMTP lightning overvoltage studies from a numerical electromagnetic simulation result obtained by the FDTD (Finite Difference Time Domain) method. The FDTD simulation carried out in this paper takes into account the following items which have been ignored or over-simplified in previously-presented simulations: (i) resistivity of the ground soil; (ii) arms, major slant elements, and foundations of the tower; (iii) development speed of the lightning return stroke. For validation purpose a pulse test of a 500-kV transmission tower is simulated, and a comparison with the measured result shows that the present FDTD simulation gives a sufficiently accurate result. Using this validated FDTD-based simulation method the insulator-string voltages of a tower for a lightning stroke are calculated, and based on the simulation result the parameter values of the proposed tower model for EMTP studies are determined in a systematic way. Since previously-presented models include trial-and-error process in the parameter determination, it can be said that the proposed model is more general in this regard. As an illustrative example, the 500-kV transmission tower mentioned above is modeled, and it is shown that the derived model closely reproduces the FDTD simulation result.

  2. A hierarchy of models for simulating experimental results from a 3D heterogeneous porous medium

    Science.gov (United States)

    Vogler, Daniel; Ostvar, Sassan; Paustian, Rebecca; Wood, Brian D.

    2018-04-01

    In this work we examine the dispersion of conservative tracers (bromide and fluorescein) in an experimentally-constructed three-dimensional dual-porosity porous medium. The medium is highly heterogeneous (σY2 = 5.7), and consists of spherical, low-hydraulic-conductivity inclusions embedded in a high-hydraulic-conductivity matrix. The bimodal medium was saturated with tracers, and then flushed with tracer-free fluid while the effluent breakthrough curves were measured. The focus for this work is to examine a hierarchy of four models (in the absence of adjustable parameters) with decreasing complexity to assess their ability to accurately represent the measured breakthrough curves. The most information-rich model was (1) a direct numerical simulation of the system in which the geometry, boundary and initial conditions, and medium properties were fully independently characterized experimentally with high fidelity. The reduced-information models included; (2) a simplified numerical model identical to the fully-resolved direct numerical simulation (DNS) model, but using a domain that was one-tenth the size; (3) an upscaled mobile-immobile model that allowed for a time-dependent mass-transfer coefficient; and, (4) an upscaled mobile-immobile model that assumed a space-time constant mass-transfer coefficient. The results illustrated that all four models provided accurate representations of the experimental breakthrough curves as measured by global RMS error. The primary component of error induced in the upscaled models appeared to arise from the neglect of convection within the inclusions. We discuss the necessity to assign value (via a utility function or other similar method) to outcomes if one is to further select from among model options. Interestingly, these results suggested that the conventional convection-dispersion equation, when applied in a way that resolves the heterogeneities, yields models with high fidelity without requiring the imposition of a more

  3. Do dental stem cells depict distinct characteristics? - Establishing their "phenotypic fingerprint"

    Directory of Open Access Journals (Sweden)

    Deepa Ponnaiyan

    2014-01-01

    Full Text Available Dental tissues provide an alternate source of stem cells compared with bone marrow and have a similar potency as that of bone marrow derived mesenchymal stem cells. It has been established there are six types of dental stem cells: Dental pulp stem cells, stem cells from human exfoliated deciduous teeth, stem cells from apical papilla, periodontal ligament stem cells, dental follicle progenitor cells, oral periosteum stem cells and recently gingival connective tissue stem cells . Most of the dental tissues have a common developmental pathway; thus, it is relevant to understand whether stem cells derived from these closely related tissues are programmed differently. The present review analyzes whether stem cells form dental tissues depict distinct characteristics by gaining insight into differences in their immunophenotype. In addition, to explore the possibility of establishing a unique phenotypic fingerprint of these stem cells by identifying the unique markers that can be used to isolate these stem cells. This, in future will help in developing better techniques and markers for identification and utilization of these stem cells for regenerative therapy.

  4. Adapting the design of Anesthesia Information Management Systems to innovations depicted in Industrial Property documents.

    Science.gov (United States)

    Spyropoulos, B; Tzavaras, A; Zogogianni, D; Botsivaly, M

    2013-01-01

    The purpose of this paper is to present the design and the current development status of an Anesthesia Information Management System (AIMS). For this system, the physical and technical advances, depicted in relevant, recently published Industrial Property documents, have been taken into account. Additional innovative sensors create further data-load to be managed. Novel wireless data-transmission modes demand eventually compliance to further proper standards, so that interoperability between AIMS and the existing Hospital Information Systems is being sustained. We attempted to define, the state-of-the-art concerning the functions, the design-prerequisites and the relevant standards and of an "emerging" AIMS that is combining hardware innovation, real-time data acquisition, processing and displaying and lastly enabling the necessary interoperability with the other components of the existing Hospital Information Systems. Finally, we report based on this approach, about the design and implementation status, of our "real-world" system under development and discuss the multifarious obstacles encountered during this still on-going project.

  5. A Consideration of Breast Imagery in Art as Depicted through Western Painting

    Directory of Open Access Journals (Sweden)

    Kun Hwang

    2015-03-01

    Full Text Available The aim of this study is to consider breast imagery in art as depicted through western painting. Twenty western art paintings were collated. Most of the sample paintings were created from the mid-nineteenth century to the late twentieth century and some are from the Renaissance period. Ten anthropometric items were used to measure 15 distances between two landmarks and 3 angles between three points. The distance from the nipple to the sternal notch and to the midclavicular point was the same and they were 0.46 of the distance from the sternal notch to the umbilicus. The shape of the projection of the breast was almost an isosceles triangle and the altitude of the triangle was at a proportion of 0.45 of the bottom length and 0.16 of the distance from the sternal notch to the umbilicus. The distance between the lateral ends of the breasts was 2.14 times the facial width and the distance between nipples was 1.36 times the facial width. Proportions from works of art are more ideal and attractive than clinically measured proportions. The desirable ratios measured from historical paintings might be useful in planning breast surgeries.

  6. Media depictions of mental illness: an analysis of the use of dangerousness.

    Science.gov (United States)

    Allen, R; Nairn, R G

    1997-06-01

    To explore how the commonsense understanding, that those with a mental illness are dangerous, is deployed in a small sample of print media. The print media sample was subjected to a discourse analysis informed by knowledge of media practices. Materials were read closely and references to mental illness were identified, classified and analysed. This non-sensational material was shown to provide repeated confirmations of the commonsense understanding that mental illnesses make people unpredictable and dangerous. Close study of the lead article suggested that it was written so that readers had to draw on such understandings to make sense of the account it presented. The study challenges the notion that media present negative depictions of mental illnesses either because journalists are poorly informed or because 'sensation sells'. It is concluded that media practices directed at engaging readers require the use of cases and a style of writing that forces readers to draw upon commonsense knowledge of mental illness to understand the text. It is argued that this is a deliberate effort to enlist readers as co-creators of the text and thereby increase their interest.

  7. Transcranial Doppler ultrasound during galvanic labyrinth polarization depicts central vestibular processing, demonstrating bilateral vestibular projection.

    Science.gov (United States)

    Schlosser, Hans-Georg; Guldin, Wolfgang; Fritzsche, Danny; Clarke, Andrew H

    2008-07-01

    The combination of galvanic labyrinth polarization and transcranial Doppler ultrasound was employed to depict the neurovascular coupling in the cerebral vestibular areas. For galvanic stimulation, surface electrodes were attached to the right and left mastoid and two further electrodes were fixed near to each shoulder blade. Thus, each pair of electrodes (mastoid to shoulder) facilitated unilateral stimulation of the ipsilateral vestibular labyrinth. Blood flow in the middle cerebral artery and the internal carotid artery in both hemispheres was measured by means of Doppler ultrasound. The transcranial Doppler ultrasound system was head-fixed and allowed continuous monitoring of the blood flow throughout the trials. Using a series of different stimulation modes (bilateral, unilateral left, unilateral right and sham), the changes in mean blood flow velocity were evaluated by comparing baseline blood flow under resting conditions to blood flow during stimulation. A total of 18 trials were performed with each of seven volunteer subjects. Galvanic labyrinth polarization elicited a clear sensation of pendular body movement in all subjects. Significant blood flow increase (P < 0.05) in both hemispheres was observed during bilateral stimulation. Of more interest is that unilateral stimulation also elicited a significant increase in flow in both the ipsilateral and the contralateral hemispheres, demonstrating the existence of bilateral projections from each vestibular labyrinth. The combination of galvanic labyrinth polarization with transcranial Doppler ultrasound blood flow measurement provides a novel approach to the functional assessment of the vestibular system (deep cerebral structures and cortical areas). This novel technique provides a useful tool for clinical examinations.

  8. Combined multi-kernel head computed tomography images optimized for depicting both brain parenchyma and bone.

    Science.gov (United States)

    Takagi, Satoshi; Nagase, Hiroyuki; Hayashi, Tatsuya; Kita, Tamotsu; Hayashi, Katsumi; Sanada, Shigeru; Koike, Masayuki

    2014-01-01

    The hybrid convolution kernel technique for computed tomography (CT) is known to enable the depiction of an image set using different window settings. Our purpose was to decrease the number of artifacts in the hybrid convolution kernel technique for head CT and to determine whether our improved combined multi-kernel head CT images enabled diagnosis as a substitute for both brain (low-pass kernel-reconstructed) and bone (high-pass kernel-reconstructed) images. Forty-four patients with nondisplaced skull fractures were included. Our improved multi-kernel images were generated so that pixels of >100 Hounsfield unit in both brain and bone images were composed of CT values of bone images and other pixels were composed of CT values of brain images. Three radiologists compared the improved multi-kernel images with bone images. The improved multi-kernel images and brain images were identically displayed on the brain window settings. All three radiologists agreed that the improved multi-kernel images on the bone window settings were sufficient for diagnosing skull fractures in all patients. This improved multi-kernel technique has a simple algorithm and is practical for clinical use. Thus, simplified head CT examinations and fewer images that need to be stored can be expected.

  9. Looking at the Camp: Paleolithic Depiction of a Hunter-Gatherer Campsite.

    Directory of Open Access Journals (Sweden)

    Marcos García-Diez

    Full Text Available Landscapes and features of the everyday world were scarcely represented in Paleolithic art, especially those features associated with the human landscape (huts and campsites. On the contrary, other figurative motifs (especially animals and signs, traditionally linked to the magic or religious conceptions of these hunter-gatherer societies, are the predominant themes of Upper Paleolithic art. This paper seeks to present an engraved schist slab recently found in the Molí del Salt site (North-eastern Iberia and dated at the end of the Upper Paleolithic, ca. 13,800 years ago. This slab displays seven semicircular motifs that may be interpreted as the representation of dome-shaped huts. The analysis of individual motifs and the composition, as well as the ethnographic and archeological contextualization, suggests that this engraving is a naturalistic depiction of a hunter-gatherer campsite. Campsites can be considered the first human landscape, the first area of land whose visible features were entirely constructed by humans. Given the social meaning of campsites in hunter-gatherer life-styles, this engraving may be considered one of the first representations of the domestic and social space of a human group.

  10. Looking at the Camp: Paleolithic Depiction of a Hunter-Gatherer Campsite.

    Science.gov (United States)

    García-Diez, Marcos; Vaquero, Manuel

    2015-01-01

    Landscapes and features of the everyday world were scarcely represented in Paleolithic art, especially those features associated with the human landscape (huts and campsites). On the contrary, other figurative motifs (especially animals) and signs, traditionally linked to the magic or religious conceptions of these hunter-gatherer societies, are the predominant themes of Upper Paleolithic art. This paper seeks to present an engraved schist slab recently found in the Molí del Salt site (North-eastern Iberia) and dated at the end of the Upper Paleolithic, ca. 13,800 years ago. This slab displays seven semicircular motifs that may be interpreted as the representation of dome-shaped huts. The analysis of individual motifs and the composition, as well as the ethnographic and archeological contextualization, suggests that this engraving is a naturalistic depiction of a hunter-gatherer campsite. Campsites can be considered the first human landscape, the first area of land whose visible features were entirely constructed by humans. Given the social meaning of campsites in hunter-gatherer life-styles, this engraving may be considered one of the first representations of the domestic and social space of a human group.

  11. Constrained spherical deconvolution-based tractography to depict and characterize a case of "hyperplastic fornix dorsalis".

    Science.gov (United States)

    Contarino, Valeria Elisa; Bulgheroni, Sara; Savoiardo, Mario; Annunziata, Silvia; Aquino, Domenico; Riva, Daria; Erbetta, Alessandra

    2014-12-01

    The authors report the relevance of Constrained Spherical Deconvolution (CSD)-based tractography in demonstrating and quantitatively assessing a complex midline structure malformation in a 9-year-old girl with moderate intellectual disability and thickening of corpus callosum (CC) body discovered through conventional MRI (cMRI). Color-encoded fractional anisotropy (FA) maps clearly demonstrated what the cMRI showed as a thicknening of CC: a green, longitudinal bundle running dorsally to the body of CC. A more complex midline maldevelopmental disorder was suspected. CSD-based tractography was performed to virtually dissect the anomalous supracallosal longitudinal bundle (SLB), CC, fornix, anterior commissure (AC) and cingula. In addition, DTI-derived metrics were calculated for each virtually dissected fiber tract. The tractography study evidenced projections of the anomalous SLB in left forceps minor and to parietal regions, and projections of the fornix in right forceps minor. CC virtual dissection showed no gross abnormality, and cingula appeared slightly less extended than normal. The considerable thinning of AC hampered its virtual dissection. DTI-derived metrics suggested alterations in fornix microstructure, attributable to higher fiber density. In investigating white matter, cMRI may not be sufficient in addressing and assessing possible anomalies, while advanced CSD-based tractography and DTI-derived metrics may prove helpful in depicting and characterizing white matter anomalies in developmental disorders. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. SOCIALIST REALISM IN LITERARY DEPICTIONS OF WAR (THE CASE OF CROATIAN PROSE NARRATIVE

    Directory of Open Access Journals (Sweden)

    Maciej Czerwiński

    2017-01-01

    Full Text Available In this article paradigms of socialist realist poetics in prose narrative on World WarTwo are taken into consideration. Some key ideologemes of socialist realism and communist worldview are underlined, such as absence of ambiguity (unequivocalness, simplifi cations, consistent mimeticism (truthful and historically concrete representation of reality, class awareness, militancy and heroism in war. Alongside theoretical and official directives, formulated by dogmatic theoreticians of socijalist realist doctrine (like Jure Franičević-Pločar who based his understandings of literature on the Soviet principles, created by Zhdanov and Stalin, there are given analyses of some literary texts written by Josip Barković, Joža Horvat, Ivo Andrić i Mate Beretin. The author focuses on literary construction of characters – the prototype illegal partisans who ruthlessly struggle against the occupiers as well as chronotopic settings which enable for the action to be set within schematized confl ict of good and evil. Including the new communist man, that is created during the revolution, there are given crucial political orientations concerning the canonized vision of the war, such as the principle of symmetry (meaning that all peoples’ traitors are fascists and the vision of the liberation from fascism as the victory of the communist revolution (in this perspective, communists are depicted as the sole antifascists.

  13. Ex-plant consequence assessment for NUREG-1150: models, typical results, uncertainties

    International Nuclear Information System (INIS)

    Sprung, J.L.

    1988-01-01

    The assessment of ex-plant consequences for NUREG-1150 source terms was performed using the MELCOR Accident Consequence Code System (MACCS). This paper briefly discusses the following elements of MACCS consequence calculations: input data, phenomena modeled, computational framework, typical results, controlling phenomena, and uncertainties. Wherever possible, NUREG-1150 results will be used to illustrate the discussion. 28 references

  14. Deriving user-informed climate information from climate model ensemble results

    Directory of Open Access Journals (Sweden)

    H. Huebener

    2017-07-01

    Full Text Available Communication between providers and users of climate model simulation results still needs to be improved. In the German regional climate modeling project ReKliEs-De a midterm user workshop was conducted to allow the intended users of the project results to assess the preliminary results and to streamline the final project results to their needs. The user feedback highlighted, in particular, the still considerable gap between climate research output and user-tailored input for climate impact research. Two major requests from the user community addressed the selection of sub-ensembles and some condensed, easy to understand information on the strengths and weaknesses of the climate models involved in the project.

  15. Use of the LQ model with large fraction sizes results in underestimation of isoeffect doses

    International Nuclear Information System (INIS)

    Sheu, Tommy; Molkentine, Jessica; Transtrum, Mark K.; Buchholz, Thomas A.; Withers, Hubert Rodney; Thames, Howard D.; Mason, Kathy A.

    2013-01-01

    Purpose: To test the appropriateness of the linear-quadratic (LQ) model to describe survival of jejunal crypt clonogens after split doses with variable (small 1–6 Gy, large 8–13 Gy) first dose, as a model of its appropriateness for both small and large fraction sizes. Methods: C3Hf/KamLaw mice were exposed to whole body irradiation using 300 kVp X-rays at a dose rate of 1.84 Gy/min, and the number of viable jejunal crypts was determined using the microcolony assay. 14 Gy total dose was split into unequal first and second fractions separated by 4 h. Data were analyzed using the LQ model, the lethal potentially lethal (LPL) model, and a repair-saturation (RS) model. Results: Cell kill was greater in the group receiving the larger fraction first, creating an asymmetry in the plot of survival vs size of first dose, as opposed to the prediction of the LQ model of a symmetric response. There was a significant difference in the estimated βs (higher β after larger first doses), but no significant difference in the αs, when large doses were given first vs small doses first. This difference results in underestimation (based on present data by approximately 8%) of isoeffect doses using LQ model parameters based on small fraction sizes. While the LPL model also predicted a symmetric response inconsistent with the data, the RS model results were consistent with the observed asymmetry. Conclusion: The LQ model underestimates doses for isoeffective crypt-cell survival with large fraction sizes (in the present setting, >9 Gy)

  16. Updating the CHAOS series of field models using Swarm data and resulting candidate models for IGRF-12

    DEFF Research Database (Denmark)

    Finlay, Chris; Olsen, Nils; Tøffner-Clausen, Lars

    Ten months of data from ESA's Swarm mission, together with recent ground observatory monthly means, are used to update the CHAOS series of geomagnetic field models with a focus on time-changes of the core field. As for previous CHAOS field models quiet-time, night-side, data selection criteria......th order spline representation with knot points spaced at 0.5 year intervals. The resulting field model is able to consistently fit data from six independent low Earth orbit satellites: Oersted, CHAMP, SAC-C and the three Swarm satellites. As an example, we present comparisons of the excellent model...... fit obtained to both the Swarm data and the CHAMP data. The new model also provides a good description of observatory secular variation, capturing rapid field evolution events during the past decade. Maps of the core surface field and its secular variation can already be extracted in the Swarm-era. We...

  17. Assessing flood risk at the global scale: model setup, results, and sensitivity

    International Nuclear Information System (INIS)

    Ward, Philip J; Jongman, Brenden; Weiland, Frederiek Sperna; Winsemius, Hessel C; Bouwman, Arno; Ligtvoet, Willem; Van Beek, Rens; Bierkens, Marc F P

    2013-01-01

    Globally, economic losses from flooding exceeded $19 billion in 2012, and are rising rapidly. Hence, there is an increasing need for global-scale flood risk assessments, also within the context of integrated global assessments. We have developed and validated a model cascade for producing global flood risk maps, based on numerous flood return-periods. Validation results indicate that the model simulates interannual fluctuations in flood impacts well. The cascade involves: hydrological and hydraulic modelling; extreme value statistics; inundation modelling; flood impact modelling; and estimating annual expected impacts. The initial results estimate global impacts for several indicators, for example annual expected exposed population (169 million); and annual expected exposed GDP ($1383 billion). These results are relatively insensitive to the extreme value distribution employed to estimate low frequency flood volumes. However, they are extremely sensitive to the assumed flood protection standard; developing a database of such standards should be a research priority. Also, results are sensitive to the use of two different climate forcing datasets. The impact model can easily accommodate new, user-defined, impact indicators. We envisage several applications, for example: identifying risk hotspots; calculating macro-scale risk for the insurance industry and large companies; and assessing potential benefits (and costs) of adaptation measures. (letter)

  18. Comparison of the 1981 INEL dispersion data with results from a number of different models

    Energy Technology Data Exchange (ETDEWEB)

    Lewellen, W S; Sykes, R I; Parker, S F

    1985-05-01

    The results from simulations by 12 different dispersion models are compared with observations from an extensive field experiment conducted by the Nuclear Regulatory Commission at the Idaho National Engineering Laboratory in July, 1981. Comparisons were made on the bases of hourly SF/sub 6/ samples taken at the surface, out to approximately 10 km from the 46 m release tower, both during and following 7 different 8-hour releases. Comparisons are also made for total integrated doses collected out to approximately 40 km. Three classes of models are used. Within the limited range appropriate for Class A models this data comparison shows that neither the puff models or the transport and diffusion models agree with the data any better than the simple Gaussian plume models. The puff and transport and diffusion models do show a slight edge in performance in comparison with the total dose over the extended range approximate for class B models. The best model results for the hourly samples show approximately 40% calculated within a factor of two when a 15/sup 0/ uncertainty in plume position is permitted and it is assumed that higher data samples may occur at stations between the actual sample sites. This is increased to 60% for the 12 hour integrated dose and 70% for the total integrated dose when the same performance measure is used. None of the models reproduce the observed patchy dose patterns. This patchiness is consistent with the discussion of the inherent uncertainty associated with time averaged plume observations contained in our companion reports on the scientific critique of available models.

  19. Comprehensive process model of clinical information interaction in primary care: results of a "best-fit" framework synthesis.

    Science.gov (United States)

    Veinot, Tiffany C; Senteio, Charles R; Hanauer, David; Lowery, Julie C

    2017-09-02

    To describe a new, comprehensive process model of clinical information interaction in primary care (Clinical Information Interaction Model, or CIIM) based on a systematic synthesis of published research. We used the "best fit" framework synthesis approach. Searches were performed in PubMed, Embase, the Cumulative Index to Nursing and Allied Health Literature (CINAHL), PsycINFO, Library and Information Science Abstracts, Library, Information Science and Technology Abstracts, and Engineering Village. Two authors reviewed articles according to inclusion and exclusion criteria. Data abstraction and content analysis of 443 published papers were used to create a model in which every element was supported by empirical research. The CIIM documents how primary care clinicians interact with information as they make point-of-care clinical decisions. The model highlights 3 major process components: (1) context, (2) activity (usual and contingent), and (3) influence. Usual activities include information processing, source-user interaction, information evaluation, selection of information, information use, clinical reasoning, and clinical decisions. Clinician characteristics, patient behaviors, and other professionals influence the process. The CIIM depicts the complete process of information interaction, enabling a grasp of relationships previously difficult to discern. The CIIM suggests potentially helpful functionality for clinical decision support systems (CDSSs) to support primary care, including a greater focus on information processing and use. The CIIM also documents the role of influence in clinical information interaction; influencers may affect the success of CDSS implementations. The CIIM offers a new framework for achieving CDSS workflow integration and new directions for CDSS design that can support the work of diverse primary care clinicians. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All

  20. The use of the k - {epsilon} turbulence model within the Rossby Centre regional ocean climate model: parameterization development and results

    Energy Technology Data Exchange (ETDEWEB)

    Markus Meier, H.E. [Swedish Meteorological and Hydrological Inst., Norrkoeping (Sweden). Rossby Centre

    2000-09-01

    As mixing plays a dominant role for the physics of an estuary like the Baltic Sea (seasonal heat storage, mixing in channels, deep water mixing), different mixing parameterizations for use in 3D Baltic Sea models are discussed and compared. For this purpose two different OGCMs of the Baltic Sea are utilized. Within the Swedish regional climate modeling program, SWECLIM, a 3D coupled ice-ocean model for the Baltic Sea has been coupled with an improved version of the two-equation k - {epsilon} turbulence model with corrected dissipation term, flux boundary conditions to include the effect of a turbulence enhanced layer due to breaking surface gravity waves and a parameterization for breaking internal waves. Results of multi-year simulations are compared with observations. The seasonal thermocline is simulated satisfactory and erosion of the halocline is avoided. Unsolved problems are discussed. To replace the controversial equation for dissipation the performance of a hierarchy of k-models has been tested and compared with the k - {epsilon} model. In addition, it is shown that the results of the mixing parameterization depend very much on the choice of the ocean model. Finally, the impact of two mixing parameterizations on Baltic Sea climate is investigated. In this case the sensitivity of mean SST, vertical temperature and salinity profiles, ice season and seasonal cycle of heat fluxes is quite large.

  1. Satellite data for systematic validation of wave model results in the Black Sea

    Science.gov (United States)

    Behrens, Arno; Staneva, Joanna

    2017-04-01

    The Black Sea is with regard to the availability of traditional in situ wave measurements recorded by usual waverider buoys a data sparse semi-enclosed sea. The only possibility for systematic validations of wave model results in such a regional area is the use of satellite data. In the frame of the COPERNICUS Marine Evolution System for the Black Sea that requires wave predictions, the third-generation spectral wave model WAM is used. The operational system is demonstrated based on four years' systematic comparisons with satellite data. The aim of this investigation was to answer two questions. Is the wave model able to provide a reliable description of the wave conditions in the Black Sea and are the satellite measurements suitable for validation purposes on such a regional scale ? Detailed comparisons between measured data and computed model results for the Black Sea including yearly statistics have been done for about 300 satellite overflights per year. The results discussed the different verification schemes needed to review the forecasting skills of the operational system. The good agreement between measured and modeled data supports the expectation that the wave model provides reasonable results and that the satellite data is of good quality and offer an appropriate validation alternative to buoy measurements. This is the required step towards further use of those satellite data for assimilation into the wave fields to improve the wave predictions. Additional support for the good quality of the wave predictions is provided by comparisons between ADCP measurements that are available for a short time period in February 2012 and the corresponding model results at a location near the Bulgarian coast in the western Black Sea. Sensitivity tests with different wave model options and different driving wind fields have been done which identify the appropriate model configuration that provides the best wave predictions. In addition to the comparisons between measured

  2. SModelS: A Tool for Making Systematic Use of Simplified Models Results

    Science.gov (United States)

    Waltenberger, Wolfgang; SModelS Group

    2016-10-01

    We present an automated software tool ”SModelS” to systematically confront theories Beyond the Standard Model (BSM) with experimental data. The tool consists of a general procedure to decompose such BSM theories into their Simplified Models Spectra (SMS). In addition, SModelS features a database containing the majority of the published SMS results of CMS and ATLAS. These results consist of the 95% confidence level upper limits on signal production cross sections. The two components together allow us to quickly confront any BSM model with LHC results. As a show-case example we will briefly discuss an application of our procedure to a specific supersymmetric model. It is one of our ongoing efforts to extend the framework to include also efficiency maps produced either by the experimental collaborations, by efforts performed within the phenomenological groups, or possibly also by ourselves. While the current implementation can handle null results only, it is our ultimate goal to build the Next Standard Model in a bottom-up fashion from both negative and positive results of several experiments. The implementation is open source, written in python, and available from http://smodels.hephy.at.

  3. Updating Finite Element Model of a Wind Turbine Blade Section Using Experimental Modal Analysis Results

    Directory of Open Access Journals (Sweden)

    Marcin Luczak

    2014-01-01

    Full Text Available This paper presents selected results and aspects of the multidisciplinary and interdisciplinary research oriented for the experimental and numerical study of the structural dynamics of a bend-twist coupled full scale section of a wind turbine blade structure. The main goal of the conducted research is to validate finite element model of the modified wind turbine blade section mounted in the flexible support structure accordingly to the experimental results. Bend-twist coupling was implemented by adding angled unidirectional layers on the suction and pressure side of the blade. Dynamic test and simulations were performed on a section of a full scale wind turbine blade provided by Vestas Wind Systems A/S. The numerical results are compared to the experimental measurements and the discrepancies are assessed by natural frequency difference and modal assurance criterion. Based on sensitivity analysis, set of model parameters was selected for the model updating process. Design of experiment and response surface method was implemented to find values of model parameters yielding results closest to the experimental. The updated finite element model is producing results more consistent with the measurement outcomes.

  4. Soil gas and radon entry into a simple test structure: Comparison of experimental and modelling results

    DEFF Research Database (Denmark)

    Andersen, C.E.; Søgaard-Hansen, J.; Majborn, B.

    1994-01-01

    A radon test structure has been established at a field site at Riso National Laboratory. Measurements have been made of soil gas entry rates, pressure couplings and radon depletion. The experimental results have been compared with results obtained from measured soil parameters and a two......-dimensional steady-state numerical model of Darcy flow and combined diffusive and advective transport of radon. For most probe locations, the calculated values of the pressure couplings and the radon depletion agree well with the measured values, thus verifying important elements of the Darcy flow approximation......, and the ability of the model to treat combined diffusive and advective transport of radon. However, the model gives an underestimation of the soil gas entry rate. Even if it is assumed that the soil has a permeability equal to the highest of the measured values, the model underestimates the soil gas entry rate...

  5. Mathematical Modeling in Tobacco Control Research: Initial Results From a Systematic Review.

    Science.gov (United States)

    Feirman, Shari P; Donaldson, Elisabeth; Glasser, Allison M; Pearson, Jennifer L; Niaura, Ray; Rose, Shyanika W; Abrams, David B; Villanti, Andrea C

    2016-03-01

    The US Food and Drug Administration has expressed interest in using mathematical models to evaluate potential tobacco policies. The goal of this systematic review was to synthesize data from tobacco control studies that employ mathematical models. We searched five electronic databases on July 1, 2013 to identify published studies that used a mathematical model to project a tobacco-related outcome and developed a data extraction form based on the ISPOR-SMDM Modeling Good Research Practices. We developed an organizational framework to categorize these studies and identify models employed across multiple papers. We synthesized results qualitatively, providing a descriptive synthesis of included studies. The 263 studies in this review were heterogeneous with regard to their methodologies and aims. We used the organizational framework to categorize each study according to its objective and map the objective to a model outcome. We identified two types of study objectives (trend and policy/intervention) and three types of model outcomes (change in tobacco use behavior, change in tobacco-related morbidity or mortality, and economic impact). Eighteen models were used across 118 studies. This paper extends conventional systematic review methods to characterize a body of literature on mathematical modeling in tobacco control. The findings of this synthesis can inform the development of new models and the improvement of existing models, strengthening the ability of researchers to accurately project future tobacco-related trends and evaluate potential tobacco control policies and interventions. These findings can also help decision-makers to identify and become oriented with models relevant to their work. © The Author 2015. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  6. Dermal uptake of phthalates from clothing: comparison of model to human participant results

    DEFF Research Database (Denmark)

    Morrison, Glenn; Weschler, Charles J.; Bekö, Gabriel

    2016-01-01

    In this research, we extend a model of transdermal uptake of phthalates to include a layer of clothing. When compared with experimental results, this model better estimates dermal uptake of diethylphthalate (DEP) and di-n-butylphthalate (DnBP) than a previous model. It also demonstrates that uptake...... is sensitive to both the gap between skin and clothing and the time clothing is allowed to adsorb phthalates. The model predictions are consistent with the observation that exposed clothing increases dermal uptake when compared with uptake observed in bare-skin participants. Extension of this model beyond...... the cotton-phthalate system will be challenging until data on partition coefficients are quantified for other combinations of SVOCs, fabric materials and environmental conditions....

  7. A Calibration of the Wierzbicki-Xue Damage Model Using Charpy Test Results

    Directory of Open Access Journals (Sweden)

    Kim Jong-Bong

    2015-01-01

    Full Text Available Damage models are frequently used to predict fractures in large deformation problems such as penetration of a projectile into a target. Though many damage models have been proposed so far, coefficients of each model have been provided for only a few materials. In this study, the coefficients of the Wierzbicki-Xue (2005 damage model for tungsten heavy alloy (DX2HCMF are determined using the Charpy impact test. The Wierzbicki-Xue fracture criterion is implemented into NET3D code in which a node-split algorithm is built in. By comparing the energy absorbed in the Charpy test with the results of finite element analysis, the fracture model coefficients are determined.

  8. Quantifying Uncertainty in Model Predictions for the Pliocene (Plio-QUMP): Initial results

    Science.gov (United States)

    Pope, J.O.; Collins, M.; Haywood, A.M.; Dowsett, H.J.; Hunter, S.J.; Lunt, D.J.; Pickering, S.J.; Pound, M.J.

    2011-01-01

    Examination of the mid-Pliocene Warm Period (mPWP; ~. 3.3 to 3.0. Ma BP) provides an excellent opportunity to test the ability of climate models to reproduce warm climate states, thereby assessing our confidence in model predictions. To do this it is necessary to relate the uncertainty in model simulations of mPWP climate to uncertainties in projections of future climate change. The uncertainties introduced by the model can be estimated through the use of a Perturbed Physics Ensemble (PPE). Developing on the UK Met Office Quantifying Uncertainty in Model Predictions (QUMP) Project, this paper presents the results from an initial investigation using the end members of a PPE in a fully coupled atmosphere-ocean model (HadCM3) running with appropriate mPWP boundary conditions. Prior work has shown that the unperturbed version of HadCM3 may underestimate mPWP sea surface temperatures at higher latitudes. Initial results indicate that neither the low sensitivity nor the high sensitivity simulations produce unequivocally improved mPWP climatology relative to the standard. Whilst the high sensitivity simulation was able to reconcile up to 6 ??C of the data/model mismatch in sea surface temperatures in the high latitudes of the Northern Hemisphere (relative to the standard simulation), it did not produce a better prediction of global vegetation than the standard simulation. Overall the low sensitivity simulation was degraded compared to the standard and high sensitivity simulations in all aspects of the data/model comparison. The results have shown that a PPE has the potential to explore weaknesses in mPWP modelling simulations which have been identified by geological proxies, but that a 'best fit' simulation will more likely come from a full ensemble in which simulations that contain the strengths of the two end member simulations shown here are combined. ?? 2011 Elsevier B.V.

  9. Insight into collision zone dynamics from topography: numerical modelling results and observations

    OpenAIRE

    A. D. Bottrill; J. van Hunen; M. B. Allen

    2012-01-01

    Dynamic models of subduction and continental collision are used to predict dynamic topography changes on the overriding plate. The modelling results show a distinct evolution of topography on the overriding plate, during subduction, continental collision and slab break-off. A prominent topographic feature is a temporary (few Myrs) deepening in the area of the back arc-basin after initial collision. This collisional mantle dynamic basin (CMDB) is caused by slab steepening drawing material away...

  10. Ares I Scale Model Acoustic Test Above Deck Water Sound Suppression Results

    Science.gov (United States)

    Counter, Douglas D.; Houston, Janice D.

    2011-01-01

    The Ares I Scale Model Acoustic Test (ASMAT) program test matrix was designed to determine the acoustic reduction for the Liftoff acoustics (LOA) environment with an above deck water sound suppression system. The scale model test can be used to quantify the effectiveness of the water suppression system as well as optimize the systems necessary for the LOA noise reduction. Several water flow rates were tested to determine which rate provides the greatest acoustic reductions. Preliminary results are presented.

  11. The role of fear and disgust in predicting the effectiveness of television advertisements that graphically depict the health harms of smoking.

    Science.gov (United States)

    Jónsdóttir, Harpa Lind; Holm, Jeffrey E; Poltavski, Dmitri; Vogeltanz-Holm, Nancy

    2014-12-11

    Antismoking television advertisements that depict the graphic health harms of smoking are increasingly considered best practices, as exemplified by the Centers for Disease Control and Prevention's current national campaign. Evaluation of responses to these widely used advertisements is important to determine advertisements that are most effective and their mechanisms of action. Our study tested the hypothesis that advertisements rated highest in fear- and disgust-eliciting imagery would be rated as the most effective. Our laboratory study included 144 women and men aged 18 to 33; 84% were current nonsmokers. All participants viewed 6 antismoking television advertisements that depicted the health harms of smoking; they rated their responses of fear and disgust and the effectiveness of the advertisements. We used multilevel modeling to test the effects of the following in predicting effectiveness: fear, disgust, the fear-disgust interaction, the advertisement, and the participant's sex and smoking status. Follow-up analyses examined differences in ratings of fear, disgust, and effectiveness. Advertisement, fear, disgust, and the fear-disgust interaction were each significant predictors of effectiveness. Smoking status and sex were not significant predictors. The 3 advertisements that elicited the highest ratings of fear and disgust were rated the most effective. Our findings support the hypothesis that antismoking advertisements of health harms that elicit the greatest responses of fear or disgust are the most effective. When advertisements elicit high ratings of both fear and disgust, advertisements with graphic imagery are effective, whereas advertisements without graphic imagery are not.

  12. New weather depiction technology for night vision goggle (NVG) training: 3D virtual/augmented reality scene-weather-atmosphere-target simulation

    Science.gov (United States)

    Folaron, Michelle; Deacutis, Martin; Hegarty, Jennifer; Vollmerhausen, Richard; Schroeder, John; Colby, Frank P.

    2007-04-01

    US Navy and Marine Corps pilots receive Night Vision Goggle (NVG) training as part of their overall training to maintain the superiority of our forces. This training must incorporate realistic targets; backgrounds; and representative atmospheric and weather effects they may encounter under operational conditions. An approach for pilot NVG training is to use the Night Imaging and Threat Evaluation Laboratory (NITE Lab) concept. The NITE Labs utilize a 10' by 10' static terrain model equipped with both natural and cultural lighting that are used to demonstrate various illumination conditions, and visual phenomena which might be experienced when utilizing night vision goggles. With this technology, the military can safely, systematically, and reliably expose pilots to the large number of potentially dangerous environmental conditions that will be experienced in their NVG training flights. A previous SPIE presentation described our work for NAVAIR to add realistic atmospheric and weather effects to the NVG NITE Lab training facility using the NVG - WDT(Weather Depiction Technology) system (Colby, et al.). NVG -WDT consist of a high end multiprocessor server with weather simulation software, and several fixed and goggle mounted Heads Up Displays (HUDs). Atmospheric and weather effects are simulated using state-of-the-art computer codes such as the WRF (Weather Research μ Forecasting) model; and the US Air Force Research Laboratory MODTRAN radiative transport model. Imagery for a variety of natural and man-made obscurations (e.g. rain, clouds, snow, dust, smoke, chemical releases) are being calculated and injected into the scene observed through the NVG via the fixed and goggle mounted HUDs. This paper expands on the work described in the previous presentation and will describe the 3D Virtual/Augmented Reality Scene - Weather - Atmosphere - Target Simulation part of the NVG - WDT. The 3D virtual reality software is a complete simulation system to generate realistic

  13. The design, results and future development of the National Energy Strategy Environmental Analysis Model (NESEAM)

    International Nuclear Information System (INIS)

    Fisher, R.E.; Boyd, G.A.; Breed, W.S.

    1991-01-01

    The National Energy Strategy Environmental Model (NESEAM) has been developed to project emissions for the National Energy Strategy (NES). Two scenarios were evaluated for the NES, a Current Policy Base Case and a NES Action Case. The results from the NES Actions Case project much lower emissions than the Current Policy Base Case. Future enhancements to NESEAM will focus on fuel cycle analysis, including future technologies and additional pollutants to model. NESEAM's flexibility will allow it to model other future legislative issues. 7 refs., 4 figs., 2 tabs

  14. [DESCRIPTION AND PRESENTATION OF THE RESULTS OF ELECTROENCEPHALOGRAM PROCESSING USING AN INFORMATION MODEL].

    Science.gov (United States)

    Myznikov, I L; Nabokov, N L; Rogovanov, D Yu; Khankevich, Yu R

    2016-01-01

    The paper proposes to apply the informational modeling of correlation matrix developed by I.L. Myznikov in early 1990s in neurophysiological investigations, such as electroencephalogram recording and analysis, coherence description of signals from electrodes on the head surface. The authors demonstrate information models built using the data from studies of inert gas inhalation by healthy human subjects. In the opinion of the authors, information models provide an opportunity to describe physiological processes with a high level of generalization. The procedure of presenting the EEG results holds great promise for the broad application.

  15. Building a Global Groundwater Model fromScratch - Concepts and Results

    Science.gov (United States)

    Reinecke, R.; Song, Q.; Foglia, L.; Mehl, S.; Doll, P. M.

    2016-12-01

    To represent groundwater-surface water interactions as well as the impact of capillary rise on evapotranspiration in global-scale hydrological models, it is necessary to simulate the location and temporal variation of the groundwater table. This requires to replace simulation of groundwater dynamics by calculating groundwater storage variations in individual grid cells (independent from the storage variation in neighboring cells) by hydraulic head gradient-based groundwater modeling. Based on the experience of two research groups who have published different approaches for global-scale groundwater modeling, we present first results of our effort to develop a transient global groundwater model that is to replace the simple storage-based ground-water module of the global hydrological model WaterGAP. The following three technical and conceptual aspects of this endeavour arediscussed: (1) A software engineering approach to build a new hydraulic head based global groundwater model from scratch with the goal of maximizing performance and extensibility. (2) Comparison to other model approaches and their inherent problems. (3) Global-data deficits and how to deal with them. Furthermore, this poster presents and discusses first results and provides an outlook on future developments.

  16. Exploring the uncertainties of early detection results: model-based interpretation of mayo lung project

    Directory of Open Access Journals (Sweden)

    Berman Barbara

    2011-03-01

    Full Text Available Abstract Background The Mayo Lung Project (MLP, a randomized controlled clinical trial of lung cancer screening conducted between 1971 and 1986 among male smokers aged 45 or above, demonstrated an increase in lung cancer survival since the time of diagnosis, but no reduction in lung cancer mortality. Whether this result necessarily indicates a lack of mortality benefit for screening remains controversial. A number of hypotheses have been proposed to explain the observed outcome, including over-diagnosis, screening sensitivity, and population heterogeneity (initial difference in lung cancer risks between the two trial arms. This study is intended to provide model-based testing for some of these important arguments. Method Using a micro-simulation model, the MISCAN-lung model, we explore the possible influence of screening sensitivity, systematic error, over-diagnosis and population heterogeneity. Results Calibrating screening sensitivity, systematic error, or over-diagnosis does not noticeably improve the fit of the model, whereas calibrating population heterogeneity helps the model predict lung cancer incidence better. Conclusions Our conclusion is that the hypothesized imperfection in screening sensitivity, systematic error, and over-diagnosis do not in themselves explain the observed trial results. Model fit improvement achieved by accounting for population heterogeneity suggests a higher risk of cancer incidence in the intervention group as compared with the control group.

  17. Comparison of analytical models and experimental results for single-event upset in CMOS SRAMs

    International Nuclear Information System (INIS)

    Mnich, T.M.; Diehl, S.E.; Shafer, B.D.

    1983-01-01

    In an effort to design fully radiation-hardened memories for satellite and deep-space applications, a 16K and a 2K CMOS static RAM were modeled for single-particle upset during the design stage. The modeling resulted in the addition of a hardening feedback resistor in the 16K remained tentatively unaltered. Subsequent experiments, using the Lawrence Berkeley Laboratories' 88-inch cyclotron to accelerate krypton and oxygen ions, established an upset threshold for the 2K and the 16K without resistance added, as well as a hardening threshold for the 16K with feedback resistance added. Results for the 16K showed it to be hardenable to the higher level than previously published data for other unhardened 16K RAMs. The data agreed fairly well with the modeling results; however, a close look suggests that modification of the simulation methodology is required to accurately predict the resistance necessary to harden the RAM cell

  18. Phase Partitioning of Common Alcohols With BTEX Compounds in Water: Comparison Between Modeling and Experimental Results

    Science.gov (United States)

    Lee, K. Y.

    2007-12-01

    This study compares the modeling and experimental results on the equilibrium phase partitioning behavior of three common alcohols (ethanol, isopropanol, and methanol) in a two-phase system consisting of water and a BTEX compound. A previously developed computer program is used to generate ternary phase diagrams for each alcohol-water-NAPL mixture combination, where the required activity coefficients are estimated using the UNIFAC model. A set of laboratory experiments is conducted to determine the maximum single-phase water content for every alcohol-water-NAPL mixture combination considered in this study, where the initial volume composition is 85 percent alcohol and 15 percent NAPL. Comparison of experimental results against UNIFAC- derived modeling results shows good agreement for mixtures containing ethanol and methanol, but relatively poor agreement for mixtures containing isopropanol.

  19. Latest results from the EU project AVATAR: Aerodynamic modelling of 10 MW wind turbines

    DEFF Research Database (Denmark)

    Schepers O. Ceyhan, J. G.; Boorsma, K.; Gonzalez, A.

    2016-01-01

    This paper presents the most recent results from the EU project AVATAR in which aerodynamic models are improved and validated for wind turbines on a scale of 10 MW and more. Measurements on a DU 00-W-212 airfoil are presented which have been taken in the pressurized DNW-HDG wind tunnel up...... to a Reynolds number of 15 Million. These measurements are compared with measurements in the LM wind tunnel for Reynolds numbers of 3 and 6 Million and with calculational results. In the analysis of results special attention is paid to high Reynolds numbers effects. CFD calculations on airfoil performance...... results from 3D rotor models where a comparison is made between results from vortex wake methods and BEM methods at yawed conditions....

  20. THE EFFECTS OF COOPERATIVE LEARNING MODEL GROUP INVESTIGATION AND MOTIVATION TOWARD PHYSICS LEARNING RESULTS MAN TANJUNGBALAI

    Directory of Open Access Journals (Sweden)

    Amalia Febri Aristi

    2014-12-01

    Full Text Available This study aimed to determine: (1 Is there a difference in student's learning outcomes with the application of learning models Investigation Group and Direct Instruction teaching model. (2 Is there a difference in students' motivation with the application of learning models Investigation Group and Direct Instruction teaching model, (3 Is there an interaction between learning models Investigation Group and Direct Instruction to improve students' motivation in learning outcomes Physics. This research is a quasi experimental. The study population was a student of class XII Tanjung Balai MAN. Random sample selection is done by randomizing the class. The instrument used consisted of: (1 achievement test (2 students' motivation questionnaire. The tests are used to obtain the data is shaped essay. The data in this study were analyzed using ANOVA analysis of two paths. The results showed that: (1 there were differences in learning outcomes between students who used the physics model of Group Investigation learning compared with students who used the Direct Instruction teaching model. (2 There was a difference in student's learning outcomes that had a low learning motivation and high motivation to learn both in the classroom and in the classroom Investigation Group Direct Instruction. (3 There was interaction between learning models Instruction Direct Group Investigation and motivation to learn in improving learning outcomes Physics.

  1. Involving lay and professional stakeholders in the development of a research intervention for the DEPICTED study.

    Science.gov (United States)

    Lowes, Lesley; Robling, Michael R; Bennert, Kristina; Crawley, Charlotte; Hambly, Helen; Hawthorne, Kamila; Gregory, John W

    2011-09-01

    AIM This paper focuses on stakeholders' active involvement at key stages of the research as members of a Stakeholder Action Group (SAG), particularly in the context of lay stakeholder involvement. Some challenges that can arise and wider issues (e.g. empowerment, the impact of user involvement) are identified and explored within the literature on service user involvement in health care research, reflecting on the implications for researchers. BACKGROUND In the DEPICTED study, lay and professional stakeholders were actively involved in developing a complex research intervention. Lay stakeholders comprised teenage and adult patients with diabetes, parents and patient organization representatives. Professional stakeholders were from a range of disciplines. METHODS Three 1-day research meetings were attended by 13-17 lay stakeholders and 10-11 professional stakeholders (plus researchers). The SAG was responsible for reviewing evidence, advising on developing ideas for the research intervention and guiding plans for evaluation of the intervention in a subsequent trial. Formal evaluations were completed by stakeholders following each SAG meeting. RESULTS  Throughout the first (developmental) stage of this two-stage study, lay and professional stakeholders participated or were actively involved in activities that provided data to inform the research intervention. Lay stakeholders identified the need for and contributed to the design of a patient-held tool, strongly influenced the detailed design and content of the research intervention and outcome questionnaire, thus making a major contribution to the trial design. CONCLUSION Stakeholders, including teenagers, can be actively involved in designing a research intervention and impact significantly on study outcomes. © 2010 Blackwell Publishing Ltd.

  2. Results of the first tests of the SIDRA satellite-borne instrument breadboard model

    International Nuclear Information System (INIS)

    Dudnik, O.V.; Kurbatov, E.V.; Avilov, A.M.; Titov, K.G.; Prieto, M; Sanchez, S.; Spassky, A.V.; Sylwester, J.; Gburek, S.; Podgorski, P.

    2013-01-01

    In this work, the results of the calibration of the solid-state detectors and electronic channels of the SIDRA satellite borne energetic charged particle spectrometer-telescope breadboard model are presented. The block schemes and experimental equipment used to conduct the thermal vacuum and electromagnetic compatibility tests of the assemblies and modules of the compact satellite equipment are described. The results of the measured thermal conditions of operation of the signal analog and digital processing critical modules of the SIDRA instrument prototype are discussed. Finally, the levels of conducted interference generated by the instrument model in the primary vehicle-borne power circuits are presented.

  3. Lattice Hamiltonian approach to the Schwinger model. Further results from the strong coupling expansion

    International Nuclear Information System (INIS)

    Szyniszewski, Marcin; Manchester Univ.; Cichy, Krzysztof; Poznan Univ.; Kujawa-Cichy, Agnieszka

    2014-10-01

    We employ exact diagonalization with strong coupling expansion to the massless and massive Schwinger model. New results are presented for the ground state energy and scalar mass gap in the massless model, which improve the precision to nearly 10 -9 %. We also investigate the chiral condensate and compare our calculations to previous results available in the literature. Oscillations of the chiral condensate which are present while increasing the expansion order are also studied and are shown to be directly linked to the presence of flux loops in the system.

  4. The Presence and Depiction of Women on the Front Pages of Croatian Daily Newspapers: In the Service of Promoting Gender Stereotypes?

    Directory of Open Access Journals (Sweden)

    Dunja Majstorović

    2017-12-01

    Full Text Available In accordance with its traditional role of creating and cultivating public opinion, one should not neglect the fact that the media also serves as a tool in promoting or eradicating prejudices and stereotypes. In terms of the representation of women (their presence and the way they are portrayed in the media, this paper presents the results of a study focused on the portrayal of women on the front pages of two of Croatia’s national daily newspapers – Jutarnji list and Večernji list. The results show that men overwhelmingly dominate the fold, both as the subjects of texts and the subjects of photographs. Women, though rarely present, appeared more often than men as subjects in texts related to “lighter topics”, e.g., entertainment. Both newspapers promoted stereotyped depictions of women such as their depiction only through the lens of motherhood, family and home, the division of “feminine” and “masculine” labor, women as the weaker sex, and an emphasis placed solely on their bodies.

  5. Observation of Depictive Versus Tracing Gestures Selectively Aids Verbal Versus Visual-Spatial Learning in Primary School Children

    NARCIS (Netherlands)

    van Wermeskerken, Margot; Fijan, Nathalie; Eielts, Charly; Pouw, Wim T. J. L.

    2016-01-01

    Previous research has established that gesture observation aids learning in children. The current study examined whether observation of gestures (i.e. depictive and tracing gestures) differentially affected verbal and visual-spatial retention when learning a route and its street names. Specifically,

  6. The Changing Face of War in Textbooks: Depictions of World War II and Vietnam, 1970-2009

    Science.gov (United States)

    Lachmann, Richard; Mitchell, Lacy

    2014-01-01

    How have U.S. high school textbook depictions of World War II and Vietnam changed since the 1970s? We examined 102 textbooks published from 1970 to 2009 to see how they treated U.S. involvement in World War II and Vietnam. Our content analysis of high school history textbooks finds that U.S. textbooks increasingly focus on the personal experiences…

  7. The Turtle Mountain Reservation in North Dakota: Its History as Depicted in Louise Erdrich's "Love Medicine" and "Beet Queen."

    Science.gov (United States)

    Maristuen-Rodakowski, Julie

    1988-01-01

    Traces the history of the Chippewa tribe of Turtle Mountain Reservation, and relates it to Louise Erdrich's fictional depiction of assimilation over four generations. Discusses the French heritage of reservation families; development of Michif, a mixture of Cree and French; and effects of land allotment and BIA schooling. (SV)

  8. Depictions of Alcohol Use in a UK Government Partnered Online Social Marketing Campaign: "Hollyoaks" "The Morning after the Night before"

    Science.gov (United States)

    Atkinson, Amanda Marie; Sumnall, Harry; Measham, Fiona

    2011-01-01

    Aims: This study analysed the depiction of alcohol in an online government partnered social marketing campaign: Hollyoaks "The Morning After the Night Before". This was a new initiative, providing Internet-delivered episodes of a popular terrestrial drama targeted at young people. Methods: All the 12 episodes were coded for "visual…

  9. When Names and Schools Collide: Critically Analyzing Depictions of Culturally and Linguistically Diverse Children Negotiating Their Names in Picture Books

    Science.gov (United States)

    Keller, Tina; Franzak, Judith K.

    2016-01-01

    Names and experiences in schools are often tied together in a child's identity formation. This is true for all children, but becomes an increasingly important topic as classrooms in the United States are becoming more diverse. In this study, we seek to explore the idea of names as identity in picture books depicting minority children. In doing so,…

  10. Depiction of priority light-vehicle pre-crash scenarios for safety applications based on vehicle-to-vehicle communications

    Science.gov (United States)

    2013-04-30

    A template of pre-crash scenarios is presented to depict national crash statistics and kinematic information of time-to-collision for the design of appropriate crash countermeasures based on vehicle-to-vehicle (V2V) communications. This template serv...

  11. Use of paired management action grids for ease in depicting differences between users' and managers' perceptions of problems

    Science.gov (United States)

    R. J. Steele; James E. Fletcher

    1992-01-01

    This research was to determine whether differences exist between users and managers concerning perceptions of actual and perceived problems in parks and primarily to present a method of graphically depicting the differing perceptions of problems which exist between users and park managers which can be easily employed by area managers and related to the public, upper...

  12. Viewing Pornography Depicting Unprotected Anal Intercourse: Are There Implications for HIV Prevention among Men Who Have Sex with Men?

    Science.gov (United States)

    Stein, Dylan J; Silvera, Richard J; Hagerty, Robert; Marmor, Michael

    2011-01-01

    We used an Internet-based questionnaire to investigate whether viewing pornography depicting unprotected anal intercourse (UAI) was associated with engaging in UAI in a sample of 821 non-monogamous men who have sex with men (MSM). In the three months prior to interview, 77.2% viewed pornography depicting UAI, 42.6% engaged in insertive UAI, and 38.9% engaged in receptive UAI. Polytomous logistic regression of the 751 subjects who provided data on pornography viewing showed significantly elevated odds ratios for having engaged in receptive UAI, insertive UAI, and both receptive and insertive UAI associated with increasing percentage of pornography viewed that depicted UAI. We also found independently significant associations of engaging in UAI with age, use of inhalant nitrites, and HIV status. Although the data cannot establish causality, our findings indicate that viewing pornography depicting UAI and engaging in UAI are correlated. Further research is needed to determine if this observation may have utility for HIV prevention. PMID:21755381

  13. Comparison of Experimental Surface and Flow Field Measurements to Computational Results of the Juncture Flow Model

    Science.gov (United States)

    Roozeboom, Nettie H.; Lee, Henry C.; Simurda, Laura J.; Zilliac, Gregory G.; Pulliam, Thomas H.

    2016-01-01

    Wing-body juncture flow fields on commercial aircraft configurations are challenging to compute accurately. The NASA Advanced Air Vehicle Program's juncture flow committee is designing an experiment to provide data to improve Computational Fluid Dynamics (CFD) modeling in the juncture flow region. Preliminary design of the model was done using CFD, yet CFD tends to over-predict the separation in the juncture flow region. Risk reduction wind tunnel tests were requisitioned by the committee to obtain a better understanding of the flow characteristics of the designed models. NASA Ames Research Center's Fluid Mechanics Lab performed one of the risk reduction tests. The results of one case, accompanied by CFD simulations, are presented in this paper. Experimental results suggest the wall mounted wind tunnel model produces a thicker boundary layer on the fuselage than the CFD predictions, resulting in a larger wing horseshoe vortex suppressing the side of body separation in the juncture flow region. Compared to experimental results, CFD predicts a thinner boundary layer on the fuselage generates a weaker wing horseshoe vortex resulting in a larger side of body separation.

  14. Robustness of life cycle assessment results : influence of data variation and modelling choices on results for beverage packaging materials

    NARCIS (Netherlands)

    Harst-Wintraecken, van der E.J.M.

    2015-01-01

    Life cycle assessment (LCA) is a well-established method to evaluate the potential environmental impacts of product and service systems throughout their life cycles. However, it can happen that LCAs for the same product have different and even conflicting outcomes. LCA results need to be robust and

  15. Comparison of TS and ANN Models with the Results of Emission Scenarios in Rainfall Prediction

    Directory of Open Access Journals (Sweden)

    S. Babaei Hessar

    2016-02-01

    Full Text Available Introduction: Precipitation is one of the most important and sensitive parameters of the tropical climate that influence the catchments hydrological regime. The prediction of rainfall is vital for strategic planning and water resources management. Despite its importance, statistical rainfall forecasting, especially for long-term, has been proven to be a great challenge due to the dynamic nature of climate phenomena and random fluctuations involved in the process. Various methods, such as time series and artificial neural network models, have been proposed to predict the level of rainfall. But there is not enough attention to global warming and climate change issues. The main aim of this study is to investigate the conformity of artificial neural network and time series models with climate scenarios. Materials and Methods: For this study, 50 years of daily rainfall data (1961 to 2010 of the synoptic station of Urmia, Tabriz and Khoy was investigated. Data was obtained from Meteorological Organization of Iran. In the present study, the results of two Artificial Neural Network (ANN and Time Seri (TS methods were compared with the result of the Emission Scenarios (A2 & B1. HadCM3 model in LARS-WG software was used to generate rainfall for the next 18 years (2011-2029. The results of models were compared with climate scenarios over the next 18 years in the three synoptic stations located in the basin of the Lake Urmia. At the first stage, the best model of time series method was selected. The precipitation was estimated for the next 18 years using these models. For the same period, precipitation was forecast using artificial neural networks. Finally, the results of two models were compared with data generated under two scenarios (B1 and A2 in LARS-WG. Results and Discussion: Different order of AR, MA and ARMA was examined to select the best model of TS The results show that AR(1 was suitable for Tabriz and Khoy stations .In the Urmia station MA(1 was

  16. Exact results for quantum chaotic systems and one-dimensional fermions from matrix models

    International Nuclear Information System (INIS)

    Simons, B.D.; Lee, P.A.; Altshuler, B.L.

    1993-01-01

    We demonstrate a striking connection between the universal parametric correlations of the spectra of quantum chaotic systems and a class of integrable quantum hamiltonians. We begin by deriving a non-perturbative expression for the universal m-point correlation function of the spectra of random matrix ensembles in terms of a non-linear supermatrix σ-model. These results are shown to coincide with those from previous studies of weakly disordered metallic systems. We then introduce a continuous matrix model which describes the quantum mechanics of the Sutherland hamiltonian describing particles interacting through an inverse-square pairwise potential. We demonstrate that a field theoretic approach can be employed to determine exact analytical expressions for correlations of the quantum hamiltonian. The results, which are expressed in terms of a non-linear σ-model, are shown to coincide with those for analogous correlation functions of random matrix ensembles after an appropriate change of variables. We also discuss possible generalizations of the matrix model to higher dimensions. These results reveal a common mathematical structure which underlies branches of theoretical physics ranging from continuous matrix models to strongly interacting quantum hamiltonians, and universalities in the spectra of quantum chaotic systems. (orig.)

  17. Computations for the 1:5 model of the THTR pressure vessel compared with experimental results

    International Nuclear Information System (INIS)

    Stangenberg, F.

    1972-01-01

    In this report experimental results measured at the 1:5-model of the prestressed concrete pressure vessel of the THTR-nuclear power station Schmehausen in 1971, are compared with the results of axis-symmetrical computations. Linear-elastic computations were performed as well as approximate computations for overload pressures taking into consideration the influences of the load history (prestressing, temperature, creep) and the effects of the steel components. (orig.) [de

  18. Modelling of the earth atmosphere contamination as result of cesium 137 deflation from contaminated territories

    International Nuclear Information System (INIS)

    Zhmura, G.M.; Zhmura, N.V.

    1998-01-01

    The results of calculation of cesium 137 average annual ground atmosphere concentrations on the Belarus territory in the knots of net (50*50) km are given. The calculations were made on the base of a model notions about dusting area sources. Analysis of the results shows that cesium 137 average annual ground atmosphere concentrations on the Belarus territory are varied more than two orders depending on a point of calculation from 1 to 400 micro Bq/m 3

  19. Army Sustainability Modelling Analysis and Reporting Tool Phase 1: User Manual and Results Interpretation Guide

    Science.gov (United States)

    2009-11-01

    Force Sustainability Modelling Tool Prototype GB Gigabyte GRES General Reserve HQ Headquarters HTA Hardening the Army JOLTS Joint Operational...Hardening the Army ( HTA ) proposed force structure.1 Following this work, the Director General Preparedness and Plans – Army (DGPP-A) approached DSTO to...that the different elements of the results for the corps have been identified, we can turn our attention to what the results say about the

  20. Model unspecific search in CMS. Results at 8 TeV

    Energy Technology Data Exchange (ETDEWEB)

    Albert, Andreas; Duchardt, Deborah; Hebbeker, Thomas; Knutzen, Simon; Lieb, Jonas; Meyer, Arnd; Pook, Tobias; Roemer, Jonas [III. Physikalisches Institut A, RWTH Aachen University (Germany)

    2016-07-01

    In the year 2012, CMS collected a total data set of approximately 20 fb{sup -1} in proton-proton collisions at √(s)=8 TeV. Dedicated searches for physics beyond the standard model are commonly designed with the signatures of a given theoretical model in mind. While this approach allows for an optimised sensitivity to the sought-after signal, it may cause unexpected phenomena to be overlooked. In a complementary approach, the Model Unspecific Search in CMS (MUSiC) analyses CMS data in a general way. Depending on the reconstructed final state objects (e.g. electrons), collision events are sorted into classes. In each of the classes, the distributions of selected kinematic variables are compared to standard model simulation. An automated statistical analysis is performed to quantify the agreement between data and prediction. In this talk, the analysis concept is introduced and selected results of the analysis of the 2012 CMS data set are presented.

  1. Evidence for Symplectic Symmetry in Ab Initio No-Core Shell Model Results for Light Nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Dytrych, Tomas; Sviratcheva, Kristina D.; Bahri, Chairul; Draayer, Jerry P.; /Louisiana State U.; Vary, James P.; /Iowa State U. /LLNL, Livermore /SLAC

    2007-04-24

    Clear evidence for symplectic symmetry in low-lying states of {sup 12}C and {sup 16}O is reported. Eigenstates of {sup 12}C and {sup 16}O, determined within the framework of the no-core shell model using the JISP16 NN realistic interaction, typically project at the 85-90% level onto a few of the most deformed symplectic basis states that span only a small fraction of the full model space. The results are nearly independent of whether the bare or renormalized effective interactions are used in the analysis. The outcome confirms Elliott's SU(3) model which underpins the symplectic scheme, and above all, points to the relevance of a symplectic no-core shell model that can reproduce experimental B(E2) values without effective charges as well as deformed spatial modes associated with clustering phenomena in nuclei.

  2. Global Monthly CO2 Flux Inversion Based on Results of Terrestrial Ecosystem Modeling

    Science.gov (United States)

    Deng, F.; Chen, J.; Peters, W.; Krol, M.

    2008-12-01

    Most of our understanding of the sources and sinks of atmospheric CO2 has come from inverse studies of atmospheric CO2 concentration measurements. However, the number of currently available observation stations and our ability to simulate the diurnal planetary boundary layer evolution over continental regions essentially limit the number of regions that can be reliably inverted globally, especially over continental areas. In order to overcome these restrictions, a nested inverse modeling system was developed based on the Bayesian principle for estimating carbon fluxes of 30 regions in North America and 20 regions for the rest of the globe. Inverse modeling was conducted in monthly steps using CO2 concentration measurements of 5 years (2000 - 2005) with the following two models: (a) An atmospheric transport model (TM5) is used to generate the transport matrix where the diurnal variation n of atmospheric CO2 concentration is considered to enhance the use of the afternoon-hour average CO2 concentration measurements over the continental sites. (b) A process-based terrestrial ecosystem model (BEPS) is used to produce hourly step carbon fluxes, which could minimize the limitation due to our inability to solve the inverse problem in a high resolution, as the background of our inversion. We will present our recent results achieved through a combination of the bottom-up modeling with BEPS and the top-down modeling based on TM5 driven by offline meteorological fields generated by the European Centre for Medium Range Weather Forecast (ECMFW).

  3. Modelling analysis and prediction of women javelin throw results in the years I946 — 2013

    Directory of Open Access Journals (Sweden)

    P Grycmann

    2016-01-01

    Full Text Available The main goals of our study of the women's javelin throw were twofold; first, to analyse the dynamics of female javelin throw results variability as a function of time (time period 1946-2014, second, to create a predictive model of the results during the upcoming 4 years. The study material consisted of databases covering the female track and field events obtained from the International Association of Athletics Federations. Prior to predicting the magnitude of results change dynamics in the time to follow, the adjustment of trend function to empirical data was tested using the coefficients of convergence. Phase ll of the investigation consisted of the construction of predictive models. The greatest decreases in result indexes were noted in 2000 (9.4%, 2005-2006 (8.7% and Z009 (7.4%. The trend increase was only noted in the years 2006-2008. In general, until 1998 the mean result improved by 54.6% (100% - results of 1946 whereas from 1999 through 2011 the result only increased by 1.3%. Based on data and results variability analysis it might be presumed that, in the nearest future (2015-2018, results variability will increase by approximately 9.7%. Percent improvement of javelin throw distance calculated on the basis of the 1999 raw input data is 1.4% (end of 2014.

  4. The Witten-Sakai-Sugimoto model: A brief review and some recent results

    Science.gov (United States)

    Rebhan, Anton

    2015-05-01

    A brief review of the Witten-Sakai-Sugimoto model is given, which is a top-down holographic model of low-energy QCD with chiral quarks derived from type-IIA superstring theory. The main predictions of the model, in particular concerning meson spectra, the gluon condensate, the QCD string tension, the mass of the η' and of baryons are discussed and compared quantitatively with available experimental and/or lattice results. Then some recent results of potential interest to the physics program at the future FAIR facility are presented: The spectrum of glueballs and their decay rates into pions, and the phase diagram of QCD at finite temperature, density, and magnetic field strength.

  5. The Witten-Sakai-Sugimoto model: A brief review and some recent results

    Directory of Open Access Journals (Sweden)

    Rebhan Anton

    2015-01-01

    Full Text Available A brief review of the Witten-Sakai-Sugimoto model is given, which is a top-down holographic model of low-energy QCD with chiral quarks derived from type-IIA superstring theory. The main predictions of the model, in particular concerning meson spectra, the gluon condensate, the QCD string tension, the mass of the η′ and of baryons are discussed and compared quantitatively with available experimental and/or lattice results. Then some recent results of potential interest to the physics program at the future FAIR facility are presented: The spectrum of glueballs and their decay rates into pions, and the phase diagram of QCD at finite temperature, density, and magnetic field strength.

  6. Comparative Results on 3D Navigation of Quadrotor using two Nonlinear Model based Controllers

    Science.gov (United States)

    Bouzid, Y.; Siguerdidjane, H.; Bestaoui, Y.

    2017-01-01

    Recently the quadrotors are being increasingly employed in both military and civilian areas where a broad range of nonlinear flight control techniques are successfully implemented. With this advancement, it has become necessary to investigate the efficiency of these flight controllers by studying theirs features and compare their performance. In this paper, the control of Unmanned Aerial Vehicle (UAV) quadrotor, using two different approaches, is presented. The first controller is Nonlinear PID (NLPID) whilst the second one is Nonlinear Internal Model Control (NLIMC) that are used for the stabilization as well as for the 3D trajectory tracking. The numerical simulations have shown satisfactory results using nominal system model or disturbed model for both of them. The obtained results are analyzed with respect to several criteria for the sake of comparison.

  7. Influence of Different Modeling Strategies for CFRP on Finite Element Simulation Results

    Directory of Open Access Journals (Sweden)

    Liu Xueshu

    2016-01-01

    Full Text Available Numerical simulation is used to predict the behavior and response of carbon fiber reinforced plastic (CFRP. Sometimes zero thickness of interface layer is introduced into the numerical model to investigate the inter-layer behavior like delamination. To investigate the influence of critical volume-type defect like void, usually appeared in matrix rich region at the interface between layers, on mechanical properties of CFRP, numerical models with different interface thickness were created and tensile property and three-point bending simulation results were compared to experimental ones. It is found that accurate result is obtained with increasing of the interface thickness and up to 20% that of layer thickness is recommended to model the matrix rich region.

  8. Technogenic Rock Dumps Physical Properties' Prognosis via Results of the Structure Numerical Modeling

    Directory of Open Access Journals (Sweden)

    Markov Sergey

    2017-01-01

    Full Text Available Understanding of internal structure of the technogenic rock dumps (gob dumps is required condition for estimation of using ones as filtration massifs for treatment of mine wastewater. Internal structure of gob piles greatly depends on dumping technology to applying restrictions for use them as filtration massifs. Numerical modelling of gob dumps allows adequately estimate them physical parameters, as a filtration coefficient, density, etc. The gob dumps numerical modelling results given in this article, in particular was examined grain size distribution of determined fractions depend on dump height. Shown, that filtration coefficient is in a nonlinear dependence on amount of several fractions of rock in gob dump. The numerical model adequacy both the gob structure and the dependence of filtration coefficient from gob height acknowledged equality of calculated and real filtration coefficient values. The results of this research can be apply to peripheral dumping technology.

  9. Results of an interactively coupled atmospheric chemistry - general circulation model. Comparison with observations

    Energy Technology Data Exchange (ETDEWEB)

    Hein, R.; Dameris, M.; Schnadt, C. [and others

    2000-01-01

    An interactively coupled climate-chemistry model which enables a simultaneous treatment of meteorology and atmospheric chemistry and their feedbacks is presented. This is the first model, which interactively combines a general circulation model based on primitive equations with a rather complex model of stratospheric and tropospheric chemistry, and which is computational efficient enough to allow long-term integrations with currently available computer resources. The applied model version extends from the Earth's surface up to 10 hPa with a relatively high number (39) of vertical levels. We present the results of a present-day (1990) simulation and compare it to available observations. We focus on stratospheric dynamics and chemistry relevant to describe the stratospheric ozone layer. The current model version ECHAM4.L39(DLR)/CHEM can realistically reproduce stratospheric dynamics in the Arctic vortex region, including stratospheric warming events. This constitutes a major improvement compared to formerly applied model versions. However, apparent shortcomings in Antarctic circulation and temperatures persist. The seasonal and interannual variability of the ozone layer is simulated in accordance with observations. Activation and deactivation of chlorine in the polar stratospheric vortices and their interhemispheric differences are reproduced. The consideration of the chemistry feedback on dynamics results in an improved representation of the spatial distribution of stratospheric water vapor concentrations, i.e., the simulated meriodional water vapor gradient in the stratosphere is realistic. The present model version constitutes a powerful tool to investigate, for instance, the combined direct and indirect effects of anthropogenic trace gas emissions, and the future evolution of the ozone layer. (orig.)

  10. Depiction of normal gastrointestinal anatomy with MDCT: Comparison of low- and high-attenuation oral contrast media

    International Nuclear Information System (INIS)

    Erturk, Sukru Mehmet; Mortele, Koenraad J.; Oliva, Maria-Raquel; Ichikawa, Tomoaki; Silverman, Stuart G.; Cantisani, Vito; Pagliara, Elisa; Ros, Pablo R.

    2008-01-01

    Purpose: To compare low- and high-attenuation oral contrast media for depiction of normal gastrointestinal anatomy with multidetector-row computed tomography (MDCT). Materials and methods: A prospective, randomized study of 90 consecutive patients without known or suspected gastrointestinal disease was conducted after the approval of our Institutional Review Board. All patients underwent IV contrast-enhanced abdominal and pelvic CT scans after oral administration of 900 ml of either low- or high-attenuation barium sulphate suspension. Using a five-point scale, two radiologists independently graded distention and wall visualization of stomach, duodenum, jejunum, and ileum. The degree of distention and wall visualization was compared using Mann-Whitney U-test. Results: Duodenal, jejunal and ileal distention (p < 0.05, <0.001, <0.001, respectively) and wall visualization (p < 0.05, <0.01, <0.05, respectively) scores with low-attenuation contrast medium were significantly higher than those with high-attenuation barium sulphate preparation, for reader 1. Duodenal and jejunal wall visualization scores with low-attenuation contrast medium (p < 0.05, <0.01, respectively) were significantly higher than those with high-attenuation contrast medium, for reader 2. Interobserver agreement was fair to good for both distention (κ-range: 0.41-0.74) and wall visualization (κ-range: 0.48-0.71). Conclusion: MDCT with low-attenuation contrast medium provides distention and wall visualization of the GI tract that is equal or better than high-attenuation contrast medium

  11. Identifying the volcanic eruption depicted in a neolithic painting at Çatalhöyük, Central Anatolia, Turkey.

    Directory of Open Access Journals (Sweden)

    Axel K Schmitt

    Full Text Available A mural excavated at the Neolithic Çatalhöyük site (Central Anatolia, Turkey has been interpreted as the oldest known map. Dating to ∼6600 BCE, it putatively depicts an explosive summit eruption of the Hasan Dağı twin-peaks volcano located ∼130 km northeast of Çatalhöyük, and a birds-eye view of a town plan in the foreground. This interpretation, however, has remained controversial not least because independent evidence for a contemporaneous explosive volcanic eruption of Hasan Dağı has been lacking. Here, we document the presence of andesitic pumice veneer on the summit of Hasan Dağı, which we dated using (U-Th/He zircon geochronology. The (U-Th/He zircon eruption age of 8.97±0.64 ka (or 6960±640 BCE; uncertainties 2σ overlaps closely with (14C ages for cultural strata at Çatalhöyük, including level VII containing the "map" mural. A second pumice sample from a surficial deposit near the base of Hasan Dağı records an older explosive eruption at 28.9±1.5 ka. U-Th zircon crystallization ages in both samples range from near-eruption to secular equilibrium (>380 ka. Collectively, our results reveal protracted intrusive activity at Hasan Dağı punctuated by explosive venting, and provide the first radiometric ages for a Holocene explosive eruption which was most likely witnessed by humans in the area. Geologic and geochronologic lines of evidence thus support previous interpretations that residents of Çatalhöyük artistically represented an explosive eruption of Hasan Dağı volcano. The magmatic longevity recorded by quasi-continuous zircon crystallization coupled with new evidence for late-Pleistocene and Holocene explosive eruptions implicates Hasan Dağı as a potential volcanic hazard.

  12. Identifying the Volcanic Eruption Depicted in a Neolithic Painting at Çatalhöyük, Central Anatolia, Turkey

    Science.gov (United States)

    Schmitt, Axel K.; Danišík, Martin; Aydar, Erkan; Şen, Erdal; Ulusoy, İnan; Lovera, Oscar M.

    2014-01-01

    A mural excavated at the Neolithic Çatalhöyük site (Central Anatolia, Turkey) has been interpreted as the oldest known map. Dating to ∼6600 BCE, it putatively depicts an explosive summit eruption of the Hasan Dağı twin-peaks volcano located ∼130 km northeast of Çatalhöyük, and a birds-eye view of a town plan in the foreground. This interpretation, however, has remained controversial not least because independent evidence for a contemporaneous explosive volcanic eruption of Hasan Dağı has been lacking. Here, we document the presence of andesitic pumice veneer on the summit of Hasan Dağı, which we dated using (U-Th)/He zircon geochronology. The (U-Th)/He zircon eruption age of 8.97±0.64 ka (or 6960±640 BCE; uncertainties 2σ) overlaps closely with 14C ages for cultural strata at Çatalhöyük, including level VII containing the “map” mural. A second pumice sample from a surficial deposit near the base of Hasan Dağı records an older explosive eruption at 28.9±1.5 ka. U-Th zircon crystallization ages in both samples range from near-eruption to secular equilibrium (>380 ka). Collectively, our results reveal protracted intrusive activity at Hasan Dağı punctuated by explosive venting, and provide the first radiometric ages for a Holocene explosive eruption which was most likely witnessed by humans in the area. Geologic and geochronologic lines of evidence thus support previous interpretations that residents of Çatalhöyük artistically represented an explosive eruption of Hasan Dağı volcano. The magmatic longevity recorded by quasi-continuous zircon crystallization coupled with new evidence for late-Pleistocene and Holocene explosive eruptions implicates Hasan Dağı as a potential volcanic hazard. PMID:24416270

  13. Latest results from the EU project AVATAR : Aerodynamic modelling of 10 MW wind turbines

    NARCIS (Netherlands)

    Ceyhan, J. G Schepers O; Ceyhan, O; Boorsma, K; Gonzalez, A; Munduate, X; Pires, O; Sørensen, Jens Nørkær; Simao Ferreira, C.; Sieros, G; Madsen, J.; Voutsinas, S.; Lutz, T.; Barakos, G.; Colonia, S.; Heißelmann, H.; Meng, F.; Croce, A.

    2016-01-01

    This paper presents the most recent results from the EU project AVATAR in which aerodynamic models are improved and validated for wind turbines on a scale of 10 MW and more. Measurements on a DU 00-W-212 airfoil are presented which have been taken in the pressurized DNW-HDG wind tunnel up to a

  14. Social Approval of the Community Assessment Model for Odor Dispersal: Results from a Citizen Survey

    Science.gov (United States)

    Tyndall, John C.; Grudens-Schuck, Nancy; Harmon, Jay D.; Hoff, Steve J.

    2012-08-01

    Odors emitted from US Midwest hog production facilities present farmers, residents, and state regulatory agencies with a set of complex challenges. To predict odor exposure from multiple swine production sources simultaneously, and to determine siting recommendations for proposed new or enlarged hog facilities, researchers at Iowa State University designed the community assessment model for odor dispersion (CAM). A three-county citizen survey conducted in Iowa examined the level of hypothetical social acceptance of the modeling process, and level of trust in CAM results. While 69 % of respondents approved of modeling as a way to determine the most socially appropriate location for production sites, only 35 % would trust the results if potential odor exposure from a new facility were proposed to be built near their home. We analyzed approval of the CAM model, and level of trust, across a number of demographic, attitudinal, and belief factors regarding environmental quality and the hog industry. Overall, trust in CAM was uneven and varied across respondents. Those residents who would not trust CAM tended to be more concerned with environmental quality and less inclined to believe that the hog industry is critically important economically. Those who would not trust CAM results also had significantly more direct experience with odors. Findings point to predominantly positive, yet equivocal acceptance of CAM results among the citizenry, which is not unexpected given conflict typical of siting decisions in industry and waste disposal arenas. Recommendations are offered regarding the interaction of trust, beliefs and attitudes and the utility of CAM.

  15. Evaluation of the WAMME model surface fluxes using results from the AMMA land-surface model intercomparison project

    Energy Technology Data Exchange (ETDEWEB)

    Boone, Aaron Anthony [GAME-CNRM, Meteo-France, Toulouse (France); Poccard-Leclercq, Isabelle [Universite de Nantes, LETG-Geolittomer, Nantes (France); Xue, Yongkang; Feng, Jinming [University of California at Los Angeles, Los Angeles, CA (United States); Rosnay, Patricia de [European Centre for Medium Range Weather Forecasting, Reading (United Kingdom)

    2010-07-15

    The West African monsoon (WAM) circulation and intensity have been shown to be influenced by the land surface in numerous numerical studies using regional scale and global scale atmospheric climate models (RCMs and GCMs, respectively) over the last several decades. The atmosphere-land surface interactions are modulated by the magnitude of the north-south gradient of the low level moist static energy, which is highly correlated with the steep latitudinal gradients of the vegetation characteristics and coverage, land use, and soil properties over this zone. The African Multidisciplinary Monsoon Analysis (AMMA) has organised comprehensive activities in data collection and modelling to further investigate the significance land-atmosphere feedbacks. Surface energy fluxes simulated by an ensemble of land surface models from AMMA Land-surface Model Intercomparison Project (ALMIP) have been used as a proxy for the best estimate of the ''real world'' values in order to evaluate GCM and RCM simulations under the auspices of the West African Monsoon Modelling Experiment (WAMME) project, since such large-scale observations do not exist. The ALMIP models have been forced in off-line mode using forcing based on a mixture of satellite, observational, and numerical weather prediction data. The ALMIP models were found to agree well over the region where land-atmosphere coupling is deemed to be most important (notably the Sahel), with a high signal to noise ratio (generally from 0.7 to 0.9) in the ensemble and a inter-model coefficient of variation between 5 and 15%. Most of the WAMME models simulated spatially averaged net radiation values over West Africa which were consistent with the ALMIP estimates, however, the partitioning of this energy between sensible and latent heat fluxes was significantly different: WAMME models tended to simulate larger (by nearly a factor of two) monthly latent heat fluxes than ALMIP. This results due to a positive precipitation

  16. Characteristics of the Inner and Middle Magnetosphere: Results From the Coupled Michigan MHD Model and the Rice Convection Model

    Science.gov (United States)

    De Zeeuw, D.; Sazykin, S.; Wolf, D.; Gombosi, T.; Powell, K.

    2002-05-01

    A new high performance Rice Convection Model (RCM) has been coupled to the adaptive-grid Michigan MHD model (BATSRUS). This fully coupled code allows us to self-consistently simulate the physics in the inner and middle magnetosphere. A study will be presented of the basic characteristics of the inner and middle magnetosphere in the context of a single coupled-code run with steady inputs. The analysis will include region-2 currents, shielding of the inner magnetosphere, partial ring currents, pressure distribution, magnetic field inflation, and distribution of pV**gamma. The coupled-code simulation will be compared with results from RCM runs and algorithms.

  17. Assessment of Energy Removal Impacts on Physical Systems: Hydrodynamic Model Domain Expansion and Refinement, and Online Dissemination of Model Results

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Zhaoqing; Khangaonkar, Tarang; Wang, Taiping

    2010-08-01

    In this report we describe the 1) the expansion of the PNNL hydrodynamic model domain to include the continental shelf along the coasts of Washington, Oregon, and Vancouver Island; and 2) the approach and progress in developing the online/Internet disseminations of model results and outreach efforts in support of the Puget Sound Operational Forecast System (PS-OPF). Submittal of this report completes the work on Task 2.1.2, Effects of Physical Systems, Subtask 2.1.2.1, Hydrodynamics, for fiscal year 2010 of the Environmental Effects of Marine and Hydrokinetic Energy project.

  18. Assessment of Energy Removal Impacts on Physical Systems: Hydrodynamic Model Domain Expansion and Refinement, and Online Dissemination of Model Results

    International Nuclear Information System (INIS)

    Yang, Zhaoqing; Khangaonkar, Tarang; Wang, Taiping

    2010-01-01

    In this report we describe the (1) the expansion of the PNNL hydrodynamic model domain to include the continental shelf along the coasts of Washington, Oregon, and Vancouver Island; and (2) the approach and progress in developing the online/Internet disseminations of model results and outreach efforts in support of the Puget Sound Operational Forecast System (PS-OPF). Submittal of this report completes the work on Task 2.1.2, Effects of Physical Systems, Subtask 2.1.2.1, Hydrodynamics, for fiscal year 2010 of the Environmental Effects of Marine and Hydrokinetic Energy project.

  19. The impact of using a veterinary medicine activity book in the classroom on fifth- and sixth-grade students' depictions of veterinarians.

    Science.gov (United States)

    San Miguel, Sandra F; Burgess, Wilella; Cipriani Davis, Kauline S; Reed, Dorothy; Adedokun, Omolola

    2013-01-01

    Efforts to develop a diverse, future veterinary workforce must start as early as elementary school, when children begin to form perceptions about careers. The objective of the current project was to determine the impact of the Veterinary Medicine Activity Book: Grade 5 on fifth- and sixth-grade students' depictions of veterinarians. The book was delivered as part of the curriculum in four classrooms. Students were asked to draw a veterinarian and describe the veterinarian's activities before and after being exposed to the book. Drawings were evaluated for the gender and race/ethnicity of the illustrated veterinarian, the description of the veterinarian's activity, and animals portrayed. Significant differences were detected within three of four classrooms. In one class, after exposure to the activity book, more students drew male veterinarians and veterinarians performing an activity specifically mentioned in the book. In a second class, more students drew large animals after exposure to the activity book. In a third class, after exposure to the activity book, more students drew large animals and veterinarians performing an activity specifically mentioned in the book. Results provide preliminary evidence that children's depictions of veterinarians can be altered through use of educational materials delivered in classrooms through teacher-led discussion or formal lesson plans.

  20. Dynamic analysis of ITER tokamak. Based on results of vibration test using scaled model

    International Nuclear Information System (INIS)

    Takeda, Nobukazu; Kakudate, Satoshi; Nakahira, Masataka

    2005-01-01

    The vibration experiments of the support structures with flexible plates for the ITER major components such as toroidal field coil (TF coil) and vacuum vessel (VV) were performed using small-sized flexible plates aiming to obtain its basic mechanical characteristics such as dependence of the stiffness on the loading angle. The experimental results were compared with the analytical ones in order to estimate an adequate analytical model for ITER support structure with flexible plates. As a result, the bolt connection of the flexible plates on the base plate strongly affected on the stiffness of the flexible plates. After studies of modeling the connection of the bolts, it is found that the analytical results modeling the bolts with finite stiffness only in the axial direction and infinite stiffness in the other directions agree well with the experimental ones. Based on this, numerical analysis regarding the actual support structure of the ITER VV and TF coil was performed. The support structure composed of flexible plates and connection bolts was modeled as a spring composed of only two spring elements simulating the in-plane and out-of-plane stiffness of the support structure with flexible plates including the effect of connection bolts. The stiffness of both spring models for VV and TF coil agree well with that of shell models, simulating actual structures such as flexible plates and connection bolts based on the experimental results. It is therefore found that the spring model with the only two values of stiffness enables to simplify the complicated support structure with flexible plates for the dynamic analysis of the VV and TF coil. Using the proposed spring model, the dynamic analysis of the VV and TF coil for the ITER were performed to estimate the integrity under the design earthquake. As a result, it is found that the maximum relative displacement of 8.6 mm between VV and TF coil is much less than 100 mm, so that the integrity of the VV and TF coil of the

  1. Furthering our Understanding of Land Surface Interactions using SVAT modelling: Results from SimSphere's Validation

    Science.gov (United States)

    North, Matt; Petropoulos, George; Ireland, Gareth; Rendal, Daisy; Carlson, Toby

    2015-04-01

    With current predicted climate change, there is an increased requirement to gain knowledge on the terrestrial biosphere, for numerous agricultural, hydrological and meteorological applications. To this end, Soil Vegetation Atmospheric Transfer (SVAT) models are quickly becoming the preferred scientific tool to monitor, at fine temporal and spatial resolutions, detailed information on numerous parameters associated with Earth system interactions. Validation of any model is critical to assess its accuracy, generality and realism to distinctive ecosystems and subsequently acts as important step before its operational distribution. In this study, the SimSphere SVAT model has been validated to fifteen different sites of the FLUXNET network, where model performance was statistically evaluated by directly comparing the model predictions vs in situ data, for cloud free days with a high energy balance closure. Specific focus is given to the models ability to simulate parameters associated with the energy balance, namely Shortwave Incoming Solar Radiation (Rg), Net Radiation (Rnet), Latent Heat (LE), Sensible Heat (H), Air Temperature at 1.3m (Tair 1.3m) and Air temperature at 50m (Tair 50m). Comparisons were performed for a number distinctive ecosystem types and for 150 days in total using in-situ data from ground observational networks acquired from the year 2011 alone. Evaluation of the models' coherence to reality was evaluated on the basis of a series of statistical parameters including RMSD, R2, Scatter, Bias, MAE , NASH index, Slope and Intercept. Results showed good to very good agreement between predicted and observed datasets, particularly so for LE, H, Tair 1.3m and Tair 50m where mean error distribution values indicated excellent model performance. Due to the systematic underestimation, poorer simulation accuracies were exhibited for Rg and Rnet, yet all values reported are still analogous to other validatory studies of its kind. In overall, the model

  2. The depiction of America on Martin Waldseemüller’s world map from 1507—Humanistic geography in the service of political propaganda

    OpenAIRE

    Martin Lehmann

    2016-01-01

    This paper demonstrates that the depiction of America on Waldseemüller’s world map of 1507, regardless of its apparently modern depiction, was not a rendering based primarily on geographical knowledge of new discoveries across the Atlantic Ocean. On the contrary, this depiction of America should instead be considered to have been much more influenced by the extremely powerful political and economic interests of the Portuguese Crown and the southern German-trading houses in the impending confl...

  3. Results from a 2 x CO2 simulation with the Canadian Climate Centre general circulation model

    International Nuclear Information System (INIS)

    Boer, G.J.

    1990-01-01

    The Canadian Climate Centre's general circulation model (GCM), GCMII, was used to simulate a doubling of atmospheric carbon dioxide concentration. The experiment was a standard greenhouse gas climate change study, using a three-dimensional atmospheric circulation model coupled to a simple 'slab' ocean and a thermodynamic ice model. This standard experiment retains the sophistication and generality of an atmospheric GCM, is straightforward in its use of simplified ocean and ice models, is comparatively economical of computer time, and permits comparison of results from different models. Features of the second generation GCMII include: higher resolution at T32L10 with a transform grid of 3.75 x 3.75 degree; full diurnal and annual cycles; ocean and sea ice treatment involving specification of ocean transports; modified treatment of land surface processes and hydrology; a parameterization of cloud optical feedback; and a retention of the special application data sets of surface parameters for North America and Europe. Results of the simulation were a globally averaged surface temperature increase of 3.5 degree C; a precipitation and evaporation increase of 3%; an average decrease in soil moisture of 6.6%; a decrease in cloud cover of 2.2%; a 66% decrease in mass of sea ice; and marked changes in other quantities in the polar region. 2 refs., 2 figs., 2 tabs

  4. Implementing a continuum of care model for older people - results from a Swedish case study

    Directory of Open Access Journals (Sweden)

    Anna Duner

    2011-11-01

    Full Text Available Introduction: There is a need for integrated care and smooth collaboration between care-providing organisations and professions to create a continuum of care for frail older people. However, collaboration between organisations and professions is often problematic. The aim of this study was to examine the process of implementing a new continuum of care model in a complex organisational context, and illuminate some of the challenges involved. The introduced model strived to connect three organisations responsible for delivering health and social care to older people: the regional hospital, primary health care and municipal eldercare.Methods: The actions of the actors involved in the process of implementing the model were understood to be shaped by the actors' understanding, commitment and ability. This article is based on 44 qualitative interviews performed on four occasions with 26 key actors at three organisational levels within these three organisations.Results and conclusions: The results point to the importance of paying regard to the different cultures of the organisations when implementing a new model. The role of upper management emerged as very important. Furthermore, to be accepted, the model has to be experienced as effectively dealing with real problems in the everyday practice of the actors in the organisations, from the bottom to the top.

  5. Response of a laminar premixed flame to flow oscillations: A kinematic model and thermoacoustic instability results

    Energy Technology Data Exchange (ETDEWEB)

    Fleifil, M.; Annaswamy, A.M.; Ghoneim, A.F. [Massachusetts Inst. of Technology, Cambridge, MA (United States); Ghoneim, Z.A. [Ain Shams Univ., Abassia (Egypt)

    1996-09-01

    Combustion instability is a resonance phenomenon that arises due to the coupling between the system acoustics and the unsteady heat release. The constructive feedback between the two processes, which is known to occur as a certain phase relationship between the pressure and the unsteady heat release rate is satisfied, depends on many parameters among which is the acoustic mode, the flame holder characteristics, and the dominant burning pattern. In this paper, the authors construct an analytical model to describe the dynamic response of a laminar premixed flame stabilized on the rim of a tube to velocity oscillation. They consider uniform and nonuniform velocity perturbations superimposed on a pipe flow velocity profile. The model results show that the magnitude of heat release perturbation and its phase with respect to the dynamic perturbation dependent primarily on the flame Strohal number, representing the ratio of the dominant frequency times the tube radius to the laminar burning velocity. In terms of this number, high-frequency perturbations pass through the flame while low frequencies lead to a strong response. The phase with respect to the velocity perturbation behaves in the opposite way. Results of this model are shown to agree with experimental observations and to be useful in determining how the combustion excited model is selected among all the acoustic unstable modes. The model is then used to obtain a time-domain differential equation describing the relationship between the velocity perturbation and the heat release response over the entire frequency range.

  6. The Agricultural Model Intercomparison and Improvement Project (AgMIP): Progress and Preliminary Results

    Science.gov (United States)

    Rosenzweig, C.

    2011-12-01

    The Agricultural Model Intercomparison and Improvement Project (AgMIP) is a distributed climate-scenario simulation exercise for historical model intercomparison and future climate change conditions with participation of multiple crop and agricultural trade modeling groups around the world. The goals of AgMIP are to improve substantially the characterization of risk of hunger and world food security due to climate change and to enhance adaptation capacity in both developing and developed countries. Recent progress and the current status of AgMIP will be presented, highlighting three areas of activity: preliminary results from crop pilot studies, outcomes from regional workshops, and emerging scientific challenges. AgMIP crop modeling efforts are being led by pilot studies, which have been established for wheat, maize, rice, and sugarcane. These crop-specific initiatives have proven instrumental in testing and contributing to AgMIP protocols, as well as creating preliminary results for aggregation and input to agricultural trade models. Regional workshops are being held to encourage collaborations and set research activities in motion for key agricultural areas. The first of these workshops was hosted by Embrapa and UNICAMP and held in Campinas, Brazil. Outcomes from this meeting have informed crop modeling research activities within South America, AgMIP protocols, and future regional workshops. Several scientific challenges have emerged and are currently being addressed by AgMIP researchers. Areas of particular interest include geospatial weather generation, ensemble methods for climate scenarios and crop models, spatial aggregation of field-scale yields to regional and global production, and characterization of future changes in climate variability.

  7. Results of an interactively coupled atmospheric chemistry – general circulation model: Comparison with observations

    Directory of Open Access Journals (Sweden)

    R. Hein

    2001-04-01

    Full Text Available The coupled climate-chemistry model ECHAM4.L39(DLR/CHEM is presented which enables a simultaneous treatment of meteorology and atmospheric chemistry and their feedbacks. This is the first model which interactively combines a general circulation model with a chemical model, employing most of the important reactions and species necessary to describe the stratospheric and upper tropospheric ozone chemistry, and which is computationally fast enough to allow long-term integrations with currently available computer resources. This is possible as the model time-step used for the chemistry can be chosen as large as the integration time-step for the dynamics. Vertically the atmosphere is discretized by 39 levels from the surface up to the top layer which is centred at 10 hPa, with a relatively high vertical resolution of approximately 700 m near the extra-tropical tropopause. We present the results of a control simulation representing recent conditions (1990 and compare it to available observations. The focus is on investigations of stratospheric dynamics and chemistry relevant to describe the stratospheric ozone layer. ECHAM4.L39(DLR/CHEM reproduces main features of stratospheric dynamics in the arctic vortex region, including stratospheric warming events. This constitutes a major improvement compared to earlier model versions. However, apparent shortcomings in Antarctic circulation and temperatures persist. The seasonal and interannual variability of the ozone layer is simulated in accordance with observations. Activation and deactivation of chlorine in the polar stratospheric vortices and their inter-hemispheric differences are reproduced. Considering methane oxidation as part of the dynamic-chemistry feedback results in an improved representation of the spatial distribution of stratospheric water vapour concentrations. The current model constitutes a powerful tool to investigate, for instance, the combined direct and indirect effects of anthropogenic

  8. Results of an interactively coupled atmospheric chemistry – general circulation model: Comparison with observations

    Directory of Open Access Journals (Sweden)

    R. Hein

    Full Text Available The coupled climate-chemistry model ECHAM4.L39(DLR/CHEM is presented which enables a simultaneous treatment of meteorology and atmospheric chemistry and their feedbacks. This is the first model which interactively combines a general circulation model with a chemical model, employing most of the important reactions and species necessary to describe the stratospheric and upper tropospheric ozone chemistry, and which is computationally fast enough to allow long-term integrations with currently available computer resources. This is possible as the model time-step used for the chemistry can be chosen as large as the integration time-step for the dynamics. Vertically the atmosphere is discretized by 39 levels from the surface up to the top layer which is centred at 10 hPa, with a relatively high vertical resolution of approximately 700 m near the extra-tropical tropopause. We present the results of a control simulation representing recent conditions (1990 and compare it to available observations. The focus is on investigations of stratospheric dynamics and chemistry relevant to describe the stratospheric ozone layer. ECHAM4.L39(DLR/CHEM reproduces main features of stratospheric dynamics in the arctic vortex region, including stratospheric warming events. This constitutes a major improvement compared to earlier model versions. However, apparent shortcomings in Antarctic circulation and temperatures persist. The seasonal and interannual variability of the ozone layer is simulated in accordance with observations. Activation and deactivation of chlorine in the polar stratospheric vortices and their inter-hemispheric differences are reproduced. Considering methane oxidation as part of the dynamic-chemistry feedback results in an improved representation of the spatial distribution of stratospheric water vapour concentrations. The current model constitutes a powerful tool to investigate, for instance, the combined direct and indirect effects of anthropogenic

  9. Simple Stellar Population Modeling of Quasar Host Galaxies with Diffusion K-Means Test Results

    Science.gov (United States)

    Mosby, Gregory; Moravec, E. A.; Tremonti, C. A.; Wolf, M. J.

    2013-01-01

    In the last decade, the correlation of the masses of supermassive black holes (SMBHs) and their host galaxy stellar spheroid velocity dispersions (the M-sigma relation) was greeted as clear evidence for the co-evolution of host galaxies and their SMBHs. However, studies in the last five years have posited that this relation could arise from central-limit properties of hierarchical formation alone. To address the question of whether and how often the SMBHs evolve with their host galaxies, it is necessary to look at galaxies whose SMBHs are actively growing—quasars—and determine the host galaxy properties. The central nuclei of quasar host galaxies complicate this type of study because their high luminosity tends to wash out their host galaxies. But, by using 3-D spectroscopy with the integral field unit (IFU) Sparsepak on the WIYN telescope, we have shown that the quasar light can be mostly isolated to one fiber in order to obtain the spectra of the quasar and the host galaxy concurrently. We can then model simultaneously the scattered quasar light and the stellar populations in the host galaxy fiber using a new simple stellar population (SSP) modeling method called diffusion k-means (DFK). The objectives of the research presented in this poster are to model synthetic quasar host galaxies using a DFK basis and a more traditional basis, compare the accuracy of both modeling methods, and test the affects of various prescriptions for masking the quasar lines in the host galaxy fiber. We present results from our SSP modeling and Markov Chain Monte Carlo (MCMC) results for DFK and traditional modeling schemes using synthetic data. By determining and then using the more robust stellar population modeling method, we can more confidently study quasar host galaxies to answer remaining questions in galaxy evolution. This work was partially supported by a National Science Foundation Graduate Fellowship (NSF Grant DGE-0718123) and through the NSF's REU program (NSF Award

  10. Depiction of Trends in Administrative Healthcare Data from Hospital Information System.

    Science.gov (United States)

    Kalankesh, Leila R; Pourasghar, Faramarz; Jafarabadi, Mohammad Asghari; Khanehdan, Negar

    2015-06-01

    administrative healthcare data are among main components of hospital information system. Such data can be analyzed and deployed for a variety of purposes. The principal aim of this research was to depict trends of administrative healthcare data from HIS in a general hospital from March 2011 to March 2014. data set used for this research was extracted from the SQL database of the hospital information system in Razi general hospital located in Marand. The data were saved as CSV (Comma Separated Values) in order to facilitate data cleaning and analysis. The variables of data set included patient's age, gender, final diagnosis, final diagnosis code based on ICD-10 classification system, date of hospitalization, date of discharge, LOS(Length of Stay), ward, and survival status of the patient. Data were analyzed and visualized after applying appropriate cleansing and preparing techniques. morbidity showed a constant trend over three years. Pregnancy, childbirth and the puerperium were the leading category of final diagnosis (about 32.8 %). The diseases of the circulatory system were the second class accounting for 13 percent of the hospitalization cases. The diseases of the digestive system had the third rank (10%). Patients aged between 14 and 44 constituted a higher proportion of total cases. Diseases of the circulatory system was the most common class of diseases among elderly patients (age≥65). The highest rate of mortality was observed among patients with final diagnosis of the circulatory system diseases followed by those with diseases of the respiratory system, and neoplasms. Mortality rate for the ICU and the CCU patients were 62% and 33% respectively. The longest average of LOS (7.3 days) was observed among patients hospitalized in the ICU while patients in the Obstetrics and Gynecology ward had the shortest average of LOS (2.4 days). Multiple regression analysis revealed that LOS was correlated with variables of surgery, gender, and type of payment, ward, the

  11. A Compact Synchronous Cellular Model of Nonlinear Calcium Dynamics: Simulation and FPGA Synthesis Results.

    Science.gov (United States)

    Soleimani, Hamid; Drakakis, Emmanuel M

    2017-06-01

    Recent studies have demonstrated that calcium is a widespread intracellular ion that controls a wide range of temporal dynamics in the mammalian body. The simulation and validation of such studies using experimental data would benefit from a fast large scale simulation and modelling tool. This paper presents a compact and fully reconfigurable cellular calcium model capable of mimicking Hopf bifurcation phenomenon and various nonlinear responses of the biological calcium dynamics. The proposed cellular model is synthesized on a digital platform for a single unit and a network model. Hardware synthesis, physical implementation on FPGA, and theoretical analysis confirm that the proposed cellular model can mimic the biological calcium behaviors with considerably low hardware overhead. The approach has the potential to speed up large-scale simulations of slow intracellular dynamics by sharing more cellular units in real-time. To this end, various networks constructed by pipelining 10 k to 40 k cellular calcium units are compared with an equivalent simulation run on a standard PC workstation. Results show that the cellular hardware model is, on average, 83 times faster than the CPU version.

  12. Solar Deployment System (SolarDS) Model: Documentation and Sample Results

    Energy Technology Data Exchange (ETDEWEB)

    Denholm, P.; Drury, E.; Margolis, R.

    2009-09-01

    The Solar Deployment System (SolarDS) model is a bottom-up, market penetration model that simulates the potential adoption of photovoltaics (PV) on residential and commercial rooftops in the continental United States through 2030. NREL developed SolarDS to examine the market competitiveness of PV based on regional solar resources, capital costs, electricity prices, utility rate structures, and federal and local incentives. The model uses the projected financial performance of PV systems to simulate PV adoption for building types and regions then aggregates adoption to state and national levels. The main components of SolarDS include a PV performance simulator, a PV annual revenue calculator, a PV financial performance calculator, a PV market share calculator, and a regional aggregator. The model simulates a variety of installed PV capacity for a range of user-specified input parameters. PV market penetration levels from 15 to 193 GW by 2030 were simulated in preliminary model runs. SolarDS results are primarily driven by three model assumptions: (1) future PV cost reductions, (2) the maximum PV market share assumed for systems with given financial performance, and (3) PV financing parameters and policy-driven assumptions, such as the possible future cost of carbon emissions.

  13. Tabulation of Mie scattering calculation results for microwave radiative transfer modeling

    Science.gov (United States)

    Yeh, Hwa-Young M.; Prasad, N.

    1988-01-01

    In microwave radiative transfer model simulations, the Mie calculations usually consume the majority of the computer time necessary for the calculations (70 to 86 percent for frequencies ranging from 6.6 to 183 GHz). For a large array of atmospheric profiles, the repeated calculations of the Mie codes make the radiative transfer computations not only expensive, but sometimes impossible. It is desirable, therefore, to develop a set of Mie tables to replace the Mie codes for the designated ranges of temperature and frequency in the microwave radiative transfer calculation. Results of using the Mie tables in the transfer calculations show that the total CPU time (IBM 3081) used for the modeling simulation is reduced by a factor of 7 to 16, depending on the frequency. The tables are tested by computing the upwelling radiance of 144 atmospheric profiles generated by a 3-D cloud model (Tao, 1986). Results are compared with those using Mie quantities computed from the Mie codes. The bias and root-mean-square deviation (RMSD) of the model results using the Mie tables, in general, are less than 1 K except for 37 and 90 GHz. Overall, neither the bias nor RMSD is worse than 1.7 K for any frequency and any viewing angle.

  14. Energy consumption and economic growth in New Zealand: Results of trivariate and multivariate models

    International Nuclear Information System (INIS)

    Bartleet, Matthew; Gounder, Rukmani

    2010-01-01

    This study examines the energy consumption-growth nexus in New Zealand. Causal linkages between energy and macroeconomic variables are investigated using trivariate demand-side and multivariate production models. Long run and short run relationships are estimated for the period 1960-2004. The estimated results of demand model reveal a long run relationship between energy consumption, real GDP and energy prices. The short run results indicate that real GDP Granger-causes energy consumption without feedback, consistent with the proposition that energy demand is a derived demand. Energy prices are found to be significant for energy consumption outcomes. Production model results indicate a long run relationship between real GDP, energy consumption and employment. The Granger-causality is found from real GDP to energy consumption, providing additional evidence to support the neoclassical proposition that energy consumption in New Zealand is fundamentally driven by economic activities. Inclusion of capital in the multivariate production model shows short run causality from capital to energy consumption. Also, changes in real GDP and employment have significant predictive power for changes in real capital.

  15. Deposition and removal of fugitive dust in the arid southwestern United States: measurements and model results.

    Science.gov (United States)

    Etyemezian, Vic; Ahonen, Sean; Nikolic, Djordje; Gillies, John; Kuhns, Hampden; Gillette, Dale; Veranth, John

    2004-09-01

    This work was motivated by the need to better reconcile emission factors for fugitive dust with the amount of geologic material found on ambient filter samples. The deposition of particulate matter with aerodynamic diameter less than or equal to 10 microm (PM10), generated by travel over an unpaved road, over the first 100 m of transport downwind of the road was examined at Ft. Bliss, near El Paso, TX. The field conditions, typical for warm days in the arid southwestern United States, represented sparsely vegetated terrain under neutral to unstable atmospheric conditions. Emission fluxes of PM10 dust were obtained from towers downwind of the unpaved road at 7, 50, and 100 m. The horizontal flux measurements at the 7 m and 100 m towers indicated that PM10 deposition to the vegetation and ground was too small to measure. The data indicated, with 95% confidence, that the loss of PM10 between the source of emission at the unpaved road, represented by the 7 m tower, and a point 100 m downwind was less than 9.5%. A Gaussian model was used to simulate the plume. Values of the vertical standard deviation sigma(z) and the deposition velocity Vd were similar to the U.S. Environmental Protection Agency (EPA) ISC3 model. For the field conditions, the model predicted that removal of PM10 unpaved road dust by deposition over the distance between the point of emission and 100 m downwind would be less than 5%. However, the model results also indicated that particles larger than 10 microm (aerodynamic diameter) would deposit more appreciably. The model was consistent with changes observed in size distributions between 7 m and 100 m downwind, which were measured with optical particle counters. The Gaussian model predictions were also compared with another study conducted over rough terrain and stable atmospheric conditions. Under such conditions, measured PM10 removal rates over 95 m of downwind transport were reported to be between 86% and 89%, whereas the Gaussian model predicted

  16. Financial analysis and forecasting of the results of small businesses performance based on regression model

    Directory of Open Access Journals (Sweden)

    Svetlana O. Musienko

    2017-03-01

    Full Text Available Objective to develop the economicmathematical model of the dependence of revenue on other balance sheet items taking into account the sectoral affiliation of the companies. Methods using comparative analysis the article studies the existing approaches to the construction of the company management models. Applying the regression analysis and the least squares method which is widely used for financial management of enterprises in Russia and abroad the author builds a model of the dependence of revenue on other balance sheet items taking into account the sectoral affiliation of the companies which can be used in the financial analysis and prediction of small enterprisesrsquo performance. Results the article states the need to identify factors affecting the financial management efficiency. The author analyzed scientific research and revealed the lack of comprehensive studies on the methodology for assessing the small enterprisesrsquo management while the methods used for large companies are not always suitable for the task. The systematized approaches of various authors to the formation of regression models describe the influence of certain factors on the company activity. It is revealed that the resulting indicators in the studies were revenue profit or the company relative profitability. The main drawback of most models is the mathematical not economic approach to the definition of the dependent and independent variables. Basing on the analysis it was determined that the most correct is the model of dependence between revenues and total assets of the company using the decimal logarithm. The model was built using data on the activities of the 507 small businesses operating in three spheres of economic activity. Using the presented model it was proved that there is direct dependence between the sales proceeds and the main items of the asset balance as well as differences in the degree of this effect depending on the economic activity of small

  17. Recent results of searches for beyond Standard Model physics in ATLAS

    CERN Document Server

    Serkin, Leonid; The ATLAS collaboration

    2017-01-01

    Recent results of searches for beyond Standard Model physics in ATLAS are presented, with particular focus on searches for new phenomena in high jet multiplicity final states. These include searches for charged Higgs boson in the $H^{+} \\to tb $ decay channel, vector-like quark pair production, four-top-quark production in different signal benchmark scenarios and associated heavy Higgs boson production. No significant excess are observed in data and exclusion limits on cross sections and masses are given for the signal models in a number of benchmark scenarios, in most cases significantly extending the reach of previous searches.

  18. First Test Results of the 150 mm Aperture IR Quadrupole Models for the High Luminosity LHC

    Energy Technology Data Exchange (ETDEWEB)

    Ambrosio, G. [Fermilab; Chlachidze, G. [Fermilab; Wanderer, P. [Brookhaven; Ferracin, P. [CERN; Sabbi, G. [LBNL, Berkeley

    2016-10-06

    The High Luminosity upgrade of the LHC at CERN will use large aperture (150 mm) quadrupole magnets to focus the beams at the interaction points. The high field in the coils requires Nb3Sn superconductor technology, which has been brought to maturity by the LHC Accelerator Re-search Program (LARP) over the last 10 years. The key design targets for the new IR quadrupoles were established in 2012, and fabrication of model magnets started in 2014. This paper discusses the results from the first single short coil test and from the first short quadrupole model test. Remaining challenges and plans to address them are also presented and discussed.

  19. First Test Results of the 150 mm Aperture IR Quadrupole Models for the High Luminosity LHC

    CERN Document Server

    Ambrosio, G; Wanderer, P; Ferracin, P; Sabbi, G

    2017-01-01

    The High Luminosity upgrade of the LHC at CERN will use large aperture (150 mm) quadrupole magnets to focus the beams at the interaction points. The high field in the coils requires Nb3Sn superconductor technology, which has been brought to maturity by the LHC Accelerator Re-search Program (LARP) over the last 10 years. The key design targets for the new IR quadrupoles were established in 2012, and fabrication of model magnets started in 2014. This paper discusses the results from the first single short coil test and from the first short quadrupole model test. Remaining challenges and plans to address them are also presented and discussed.

  20. A Module for Graphical Display of Model Results with the CBP Toolbox

    Energy Technology Data Exchange (ETDEWEB)

    Smith, F. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-04-21

    This report describes work performed by the Savannah River National Laboratory (SRNL) in fiscal year 2014 to add enhanced graphical capabilities to display model results in the Cementitious Barriers Project (CBP) Toolbox. Because Version 2.0 of the CBP Toolbox has just been released, the graphing enhancements described in this report have not yet been integrated into a new version of the Toolbox. Instead they have been tested using a standalone GoldSim model and, while they are substantially complete, may undergo further refinement before full implementation. Nevertheless, this report is issued to document the FY14 development efforts which will provide a basis for further development of the CBP Toolbox.

  1. Exact results for survival probability in the multistate Landau-Zener model

    International Nuclear Information System (INIS)

    Volkov, M V; Ostrovsky, V N

    2004-01-01

    An exact formula is derived for survival probability in the multistate Landau-Zener model in the special case where the initially populated state corresponds to the extremal (maximum or minimum) slope of a linear diabatic potential curve. The formula was originally guessed by S Brundobler and V Elzer (1993 J. Phys. A: Math. Gen. 26 1211) based on numerical calculations. It is a simple generalization of the expression for the probability of diabatic passage in the famous two-state Landau-Zener model. Our result is obtained via analysis and summation of the entire perturbation theory series

  2. AG Channel Measurement and Modeling Results for Over-Sea Conditions

    Science.gov (United States)

    Matolak, David; Sun, Rouyu

    2014-01-01

    This report describes results from flight tests conducted in an over-sea environment, for the purpose of characterizing the air-to-ground (AG) channel, for future unmanned aircraft system (UAS) communication system analysis and design. These results are for the first of a set of several flight tests conducted in different ground site (GS) environments. An ultimate aim of all these tests is the development of models for the AG channel that can be used in communication system evaluation. In this report we provide measured results for propagation path loss, root-mean square delay spread (RMS-DS), and the correlation coefficient of the primary received signal components on the four antennas (two antennas for C-band, two for L-band). For path loss, the curved-earth two-ray model provides a reasonable fit to the measured data, altered by several dB at the shortest link distances by aircraft antenna pattern effects. This two-ray model also accounts for the majority of measured RMS-DS results of a few tens of nanoseconds, except for the occasional intermittent reflections from surface objects. These intermittent reflections yield RMS-DS values up to several hundred nanoseconds. For portions of the flight path that were over a harbor area highly populated with boats, the channel was found to be more "continuously dispersive," with RMS-DS reaching approximately 250 ns. A separate model will be developed for this over-harbor setting. The correlation coefficient results are still undergoing analysis; preliminary observations are that correlation between signals on the same-band antennas is generally large (>0.6) for the C-band straight flight paths, whereas for the L-band signals and for the oval-shaped flight paths the correlation is generally small (below 0.4). Inter-band correlations are typically very small, and are well modeled as zero-mean Gaussian in distribution, with a standard deviation less than 0.2. Hence the over-sea channel effects in the two bands can be

  3. Preliminary Results from Electric Arc Furnace Off-Gas Enthalpy Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Nimbalkar, Sachin U [ORNL; Thekdi, Arvind [E3M Inc; Keiser, James R [ORNL; Storey, John Morse [ORNL

    2015-01-01

    This article describes electric arc furnace (EAF) off-gas enthalpy models developed at Oak Ridge National Laboratory (ORNL) to calculate overall heat availability (sensible and chemical enthalpy) and recoverable heat values (steam or power generation potential) for existing EAF operations and to test ORNL s new EAF waste heat recovery (WHR) concepts. ORNL s new EAF WHR concepts are: Regenerative Drop-out Box System and Fluidized Bed System. The two EAF off-gas enthalpy models described in this paper are: 1.Overall Waste Heat Recovery Model that calculates total heat availability in off-gases of existing EAF operations 2.Regenerative Drop-out Box System Model in which hot EAF off-gases alternately pass through one of two refractory heat sinks that store heat and then transfer it to another gaseous medium These models calculate the sensible and chemical enthalpy of EAF off-gases based on the off-gas chemical composition, temperature, and mass flow rate during tap to tap time, and variations in those parameters in terms of actual values over time. The models provide heat transfer analysis for the aforementioned concepts to confirm the overall system and major component sizing (preliminary) to assess the practicality of the systems. Real-time EAF off-gas composition (e.g., CO, CO2, H2, and H2O), volume flow, and temperature data from one EAF operation was used to test the validity and accuracy of the modeling work. The EAF off-gas data was used to calculate the sensible and chemical enthalpy of the EAF off-gases to generate steam and power. The article provides detailed results from the modeling work that are important to the success of ORNL s EAF WHR project. The EAF WHR project aims to develop and test new concepts and materials that allow cost-effective recovery of sensible and chemical heat from high-temperature gases discharged from EAFs.

  4. Atmosphere and permafrost in the Arctic: results from a new regional coupled atmosphere-land model

    Science.gov (United States)

    Matthes, Heidrun; Rinke, Annette; Zhou, Xu; Dethloff, Klaus

    2017-04-01

    Frozen ground is one of the key components of the land part of the Arctic climate system. A reliable representation of the exchanges of energy, water and gases (CO2 and CH4) between frozen ground and the atmosphere is essential for simulating the present day Arctic coupled climate system realistically and its future changes with some confidence. Regional atmosphere-snow-permafrost interactions can be best studied with Regional Climate Models (RCMs) due to their high horizontal resolution compared to Global Climate Models. For this purpose, the sophisticated land model CLM4 was integrated into the Arctic regional climate model HIRHAM5 (HIRHAM5-CLM4). To validate this model, it was run over the ERAInterim period (1979-2014) and the model results were compared to a similar simulation of HIRHAM5, using the inbuilt land model, as well as to station observations. The comparison focuses on the models ability to represent observations on permafrost like permafrost extent, active layer thickness (ALT) and soil temperature profiles, as well as on the representation of the Arctic atmosphere. The representation of ALT and soil temperature profiles is significantly improved in HIRHAM5-CLM4 compared to HIRHAM5. Averaged over the period 2000-2011, the bias to station observations of ALT is reduced from -1.3 m to -0.3 m, the Arctic wide winter soil temperature root mean square is reduced from up to 14.4K to a maximum of 5K. Arctic climatology of 2m air temperature and mean sea level pressure are well represented in both HIRHAM5-CLM4 and HIRHAM5, HIRHAM5-CLM4 reduces the air temperature bias averaged over 1979-2014 over Eastern and Central Siberia in winter by 0.5K. Using CLM4 in HIRHAM5 impacts the simulation of local circulation patterns and influences the occurrence of baroclinic cyclones.

  5. Citrus species and hybrids depicted by near- and mid-infrared spectroscopy.

    Science.gov (United States)

    Páscoa, Ricardo Nmj; Moreira, Silvana; Lopes, João A; Sousa, Clara

    2018-01-31

    Citrus trees are among the most cultivated plants in the world, with a high economic impact. The wide sexual compatibility among relatives gave rise to a large number of hybrids that are difficult to discriminate. This work sought to explore the ability of infrared spectroscopy to discriminate among Citrus species and/or hybrids and to contribute to the elucidation of its relatedness. Adult leaves of 18 distinct Citrus plants were included in this work. Near- and mid-infrared (NIR and FTIR) spectra were acquired from leaves after harvesting and a drying period of 1 month. Spectra were modelled by principal component analysis and partial least squares discriminant analysis. Both techniques revealed a high discrimination potential (78.5-95.9%), being the best results achieved with NIR spectroscopy and air-dried leaves (95.9%). Infrared spectroscopy was able to successfully discriminate several Citrus species and/or hybrids. Our results contributed also to enhance insights regarding the studied Citrus species and/or hybrids. Despite the benefit of including additional samples, the results herein obtained clearly pointed infrared spectroscopy as a reliable technique for Citrus species and/or hybrid discrimination. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

  6. Impact of Photocatalysis on Fungal Cells: Depiction of Cellular and Molecular Effects on Saccharomyces cerevisiae

    Science.gov (United States)

    Thabet, Sana; Simonet, France; Lemaire, Marc; Guillard, Chantal

    2014-01-01

    We have investigated the antimicrobial effects of photocatalysis on the yeast model Saccharomyces cerevisiae. To accurately study the antimicrobial mechanisms of the photocatalytic process, we focused our investigations on two questions: the entry of the nanoparticles in treated cells and the fate of the intracellular environment. Transmission electronic microscopy did not reveal any entry of nanoparticles within the cells, even for long exposure times, despite degradation of the cell wall space and deconstruction of cellular compartments. In contrast to proteins located at the periphery of the cells, intracellular proteins did not disappear uniformly. Disappearance or persistence of proteins from the pool of oxidized intracellular isoforms was not correlated to their functions. Altogether, our data suggested that photocatalysis induces the establishment of an intracellular oxidative environment. This hypothesis was sustained by the detection of an increased level of superoxide ions (O2°−) in treated cells and by greater cell cultivability for cells expressing oxidant stress response genes during photocatalytic exposure. The increase in intracellular ROS, which was not connected to the entry of nanoparticles within the cells or to a direct contact with the plasma membrane, could be the result of an imbalance in redox status amplified by chain reactions. Moreover, we expanded our study to other yeast and filamentous fungi and pointed out that, in contrast to the laboratory model S. cerevisiae, some environmental strains are very resistant to photocatalysis. This could be related to the cell wall composition and structure. PMID:25261515

  7. Inflation or deflation? New results for Mayon Volcano applying elastic-gravitational modeling

    Science.gov (United States)

    Fernández, J.; Tiampo, K. F.; Jentzsch, G.; Charco, M.; Rundle, J. B.

    Volcanic activity produces deformation and gravity changes that many times can be used as precursors of future eruptions. Applying geodetic techniques to monitoring activity involves interpretation using deformation models. Usually, the observed changes of the deformation and gravity fields are interpreted seperately, not in a joint inversion. It can be difficult, if not impossible, to interpret the data coherently or correctly in terms of the characteristics of the intrusion or the deflation derived from the gravity changes with purely elastic models, as in the case of Mayon Volcano, Phillipines. We show that elastic-gravitational models can be used to interpret these cases simultaneously leading to a result that is more plausible on the basis of the available information. Thus, we may need to change the philosophy normally used to interpret geodetic observations. Interpretation as proposed in this work can significantly improve the possibility of predicting future eruptions.

  8. The impact of air traffic in the NAFC. Model results and measurements

    Energy Technology Data Exchange (ETDEWEB)

    Wauben, W.M.F.; Velthoven, P.F.J. van; Kelder, H.M. [Koninklijk Nederlands Meteorologisch Inst., De Bilt (Netherlands)

    1997-12-31

    The impact of aircraft emissions on the atmospheric composition has been investigated with a global chemistry transport model. The model calculations show that aircraft emissions of nitrogen oxides contribute to about 40-80% of the background values of nitrogen oxides in the North Atlantic Flight Corridor (NAFC), and lead to an increase of the background ozone concentrations by about 3-4% in winter and 5-7% in summer. The three-dimensional distributions of ozone, nitrogen oxides and nitric acid, calculated by using analysed meteorological data, have been compared with airborne measurements performed in the North Atlantic Flight Corridor as part of the EC POLINAT project. The agreement between modelled results and observations is reasonably good for ozone, but worse for nitrogen oxides and nitric acid. (author) 12 refs.

  9. Sea ice thermohaline dynamics and biogeochemistry in the Arctic Ocean: Empirical and model results

    Science.gov (United States)

    Duarte, Pedro; Meyer, Amelie; Olsen, Lasse M.; Kauko, Hanna M.; Assmy, Philipp; Rösel, Anja; Itkin, Polona; Hudson, Stephen R.; Granskog, Mats A.; Gerland, Sebastian; Sundfjord, Arild; Steen, Harald; Hop, Haakon; Cohen, Lana; Peterson, Algot K.; Jeffery, Nicole; Elliott, Scott M.; Hunke, Elizabeth C.; Turner, Adrian K.

    2017-07-01

    Large changes in the sea ice regime of the Arctic Ocean have occurred over the last decades justifying the development of models to forecast sea ice physics and biogeochemistry. The main goal of this study is to evaluate the performance of the Los Alamos Sea Ice Model (CICE) to simulate physical and biogeochemical properties at time scales of a few weeks and to use the model to analyze ice algal bloom dynamics in different types of ice. Ocean and atmospheric forcing data and observations of the evolution of the sea ice properties collected from 18 April to 4 June 2015, during the Norwegian young sea ICE expedition, were used to test the CICE model. Our results show the following: (i) model performance is reasonable for sea ice thickness and bulk salinity; good for vertically resolved temperature, vertically averaged Chl a concentrations, and standing stocks; and poor for vertically resolved Chl a concentrations. (ii) Improving current knowledge about nutrient exchanges, ice algal recruitment, and motion is critical to improve sea ice biogeochemical modeling. (iii) Ice algae may bloom despite some degree of basal melting. (iv) Ice algal motility driven by gradients in limiting factors is a plausible mechanism to explain their vertical distribution. (v) Different ice algal bloom and net primary production (NPP) patterns were identified in the ice types studied, suggesting that ice algal maximal growth rates will increase, while sea ice vertically integrated NPP and biomass will decrease as a result of the predictable increase in the area covered by refrozen leads in the Arctic Ocean.

  10. alpha-pinene oxidation by OH : Box model simulation of experimental results

    Science.gov (United States)

    Capouet, M.; Fantechi, G.; Peeters, J.; Noziere, B.; Muller, J.-F.

    2003-04-01

    A detailed gas-phase mechanism for the oxidation of alpha-pinene and pinonaldehyde by OH in the presence of NOx (Peeters et al., 2001; Fantechi et al., 2002) has been implemented in a box model. A module describing the gas/particle partitioning of the semi-volatile products has been developed and coupled to the gas-phase model. The estimation of the gas/particle partitioning coefficients requires the prediction of the saturation vapour pressures for the compounds produced in the mechanism. The method developed in this work is outlined and compared with two published methods : The Marrero and Gani (2001) and the UNIFAC ( Asher et al, 2002) methods. In order to validate the gas-phase mechanism and the partitioning model, we present comparisons of simulations results with time-dependent product concentrations measured in a series of laboratories experiments performed by Noziere et al. (1999). In these experiments, gaseous products as well as total secondary organic aerosol were measured in a variety of conditions (initial alpha-pinene, NOx, type of lamp and radical precursor). The results of these comparisons are discussed. An excellent agreement is generally observed for most gaseous products, in contrast with a very poor match between modelled and observed aerosol concentrations, pointing to the existence of missing heterogeneous processes.

  11. Results from flamelet and non-flamelet models for supersonic combustion

    Science.gov (United States)

    Ladeinde, Foluso; Li, Wenhai

    2017-11-01

    Air-breathing propulsion systems (scramjets) have been identified as a viable alternative to rocket engines for improved efficiency. A scramjet engine, which operates at flight Mach numbers around 7 or above, is characterized by the existence of supersonic flow conditions in the combustor. In a dual-mode scramjet, this phenomenon is possible because of the relatively low value of the equivalence ratio and high stagnation temperature, which, together, inhibits thermal choking downstream of transverse injectors. The flamelet method has been our choice for turbulence-combustion interaction modeling and we have extended the basic approach in several dimensions, with a focus on the way the pressure and progress variable are modeled. Improved results have been obtained. We have also examined non-flamelet models, including laminar chemistry (QL), eddy dissipation concept (EDC), and partially-stirred reactor (PaSR). The pressure/progress variable-corrected simulations give better results compared with the original model, with reaction rates that are lower than those from EDC and PaSR. In general, QL tends to over-predict the reaction rate for the supersonic combustion problems investigated in our work.

  12. Our Electron Model vindicates Schr"odinger's Incomplete Results and Require Restatement of Heisenberg's Uncertainty Principle

    Science.gov (United States)

    McLeod, David; McLeod, Roger

    2008-04-01

    The electron model used in our other joint paper here requires revision of some foundational physics. That electron model followed from comparing the experimentally proved results of human vision models using spatial Fourier transformations, SFTs, of pincushion and Hermann grids. Visual systems detect ``negative'' electric field values for darker so-called ``illusory'' diagonals that are physical consequences of the lens SFT of the Hermann grid, distinguishing this from light ``illusory'' diagonals. This indicates that oppositely directed vectors of the separate illusions are discretely observable, constituting another foundational fault in quantum mechanics, QM. The SFT of human vision is merely the scaled SFT of QM. Reciprocal space results of wavelength and momentum mimic reciprocal relationships between space variable x and spatial frequency variable p, by the experiment mentioned. Nobel laureate physicist von B'ek'esey, physiology of hearing, 1961, performed pressure input Rect x inputs that the brain always reports as truncated Sinc p, showing again that the brain is an adjunct built by sight, preserves sign sense of EMF vectors, and is hard wired as an inverse SFT. These require vindication of Schr"odinger's actual, but incomplete, wave model of the electron as having physical extent over the wave, and question Heisenberg's uncertainty proposal.

  13. Application of the IPCC model to a Brazilian landfill: First results

    International Nuclear Information System (INIS)

    Penteado, Roger; Cavalli, Massimo; Magnano, Enrico; Chiampo, Fulvia

    2012-01-01

    The Intergovernmental Panel on Climate Change gave a methodology to estimate the methane emissions from Municipal Solid Wastes landfills, based on a First Order Decay (FOD) model that assumes biodegradation kinetics depending on the type of wastes. This model can be used to estimate both the National greenhouse gas emissions in the industrialized countries as well as the reductions of these emissions in the developing ones when the Clean Development Mechanism, as defined by the Kyoto Protocol, is implemented. In this paper, the FOD model has been use to evaluate the biogas flow rates emitted by a Brazilian landfill and the results have been compared to the extracted ones: some first results can be useful to evidence the weight of key parameters and do a correct use of the model. - Highlights: ► Landfill biogas is greenhouse gas and fuel at the same time. ► In developing countries its collection can implement Kyoto Protocol mechanisms. ► Biogas collection and exploiting become part of energy policy. ► Project economical balance is based on reliable estimates of generated quantities.

  14. An analytical model for nanoparticles concentration resulting from infusion into poroelastic brain tissue.

    Science.gov (United States)

    Pizzichelli, G; Di Michele, F; Sinibaldi, E

    2016-02-01

    We consider the infusion of a diluted suspension of nanoparticles (NPs) into poroelastic brain tissue, in view of relevant biomedical applications such as intratumoral thermotherapy. Indeed, the high impact of the related pathologies motivates the development of advanced therapeutic approaches, whose design also benefits from theoretical models. This study provides an analytical expression for the time-dependent NPs concentration during the infusion into poroelastic brain tissue, which also accounts for particle binding onto cells (by recalling relevant results from the colloid filtration theory). Our model is computationally inexpensive and, compared to fully numerical approaches, permits to explicitly elucidate the role of the involved physical aspects (tissue poroelasticity, infusion parameters, NPs physico-chemical properties, NP-tissue interactions underlying binding). We also present illustrative results based on parameters taken from the literature, by considering clinically relevant ranges for the infusion parameters. Moreover, we thoroughly assess the model working assumptions besides discussing its limitations. While not laying any claims of generality, our model can be used to support the development of more ambitious numerical approaches, towards the preliminary design of novel therapies based on NPs infusion into brain tissue. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. National Fire Fuels and Risks Assessment Using Remote Sensing and Ecological Modeling: Prototype Results

    Science.gov (United States)

    Zhu, Z.; Rollins, M.

    2003-12-01

    Hazardous fuel reduction, ecosystem rehabilitation and restoration, and firefighting safety, are land management priorities emphasized by recent national fire policies such as the National Fire Plan. Implementation of these policies requires geospatial data of vegetation conditions, fire fuels, risks, and ecosystem status developed consistently nationwide that can be used at multiple scales (i.e., local, regional, and national). A new research and development project called LANDFIRE has been conducted to develop an integrated methodology to produce geospatial fire data and predictive models for the land management community and a broad range of other applications. Main deliverables include mapped potential and existing vegetation types and structure variables, various biophysical data layers, fire fuels models, fire risk layers, as well as state-of-the-art computer models for assessing fire risk, behavior and effects. In this presentation, we will review research results and findings of the LANDFIRE project using results from a prototype study covering central Utah Uinta and Wasatch ecosystems. Particularly we will describe how a consistent and operational vegetation mapping component may be achieved by integrating machine-learning algorithms, field reference data, satellite imagery, and ecologically significant biophysical variables. We will discuss how remotely sensed vegetation cover types and structure can be successfully converted to fire fuel classes and risk layers which are necessary input into fire behavior and fire effect models. Finally we will discuss challenges and opportunities for national implementation of the methodology.

  16. EQUATIONS OF NONLINEAR SOIL DAMAGE BASED ON RESULTS OF TESTING OF LATERALLY LOADED PILE MODELS

    Directory of Open Access Journals (Sweden)

    Buslov Anatoliy Semenovich

    2012-12-01

    Full Text Available Results of testing of laterally loaded pile models demonstrate that the "load -to-displacement" dependency has a nonlinear character. This dependency may be regarded as linear within the interval of (0.2…0.3 Pul only. Tests were performed in a box with displacement indicators and power equipment. The pile model length was 200 mm, and its diameter was 40 mm. A hollow steel tube was used as the material for tested piles. Based on the analysis of testing results, a pattern of the non-linear damage of the base was formulated. According to the pattern, the increase of the load intensity (damage factor m=Ph/Pul involves an increase in the damage of the continuity, or the rebuff ability of the soil foundation.

  17. Non-SUSY Beyond Standard Model Searches: Recent Results from ATLAS and CMS

    CERN Document Server

    Malek, Fairouz; The ATLAS collaboration

    2015-01-01

    The Standard Model of particle physics is a sensational success, especially since the discovery of the 125 GeV Higgs boson. However, there are still numerous unanswered questions. Why is the Higgs so light? Do the interactions couplings unify and how can gravity be included? Why three fermion generations? What is dark matter? Theories Beyond the Standard Model (BSM), such as Grand Unified Theories, Extra Dimensions or Technicolour are trying to answer these questions. In this proceedings, we will focus on the most recent results obtained by the ATLAS and CMS experiments at the LHC for BSM searches, excluding Higgs and supersymmetry searches. New results on Dark matter, heavy narrow bosons, new heavy quarks and third generation leptoquarks are presented. A summary of the prospects at 14 TeV and at the High Luminosity LHC period is given.

  18. Turbulence modeling with fractional derivatives: Derivation from first principles and initial results

    Science.gov (United States)

    Epps, Brenden; Cushman-Roisin, Benoit

    2017-11-01

    Fluid turbulence is an outstanding unsolved problem in classical physics, despite 120+ years of sustained effort. Given this history, we assert that a new mathematical framework is needed to make a transformative breakthrough. This talk offers one such framework, based upon kinetic theory tied to the statistics of turbulent transport. Starting from the Boltzmann equation and ``Lévy α-stable distributions'', we derive a turbulence model that expresses the turbulent stresses in the form of a fractional derivative, where the fractional order is tied to the transport behavior of the flow. Initial results are presented herein, for the cases of Couette-Poiseuille flow and 2D boundary layers. Among other results, our model is able to reproduce the logarithmic Law of the Wall in shear turbulence.

  19. SAMI2 model results for the quiet time low latitude ionosphere over India

    Science.gov (United States)

    Rao, S. S.; Sharma, Shweta; Pandey, R.

    2018-04-01

    Efficacy of SAMI2 model for the Indian low latitude region around 75°E longitudes has been tested for different levels of solar flux. With a slight modification of the plasma drift velocity the SAMI2 model has been successful in reproducing quiet time ionospheric low latitude features like Equatorial Ionization Anomaly. We have also showed the formation of electron hole in the topside equatorial ionosphere in the Indian sector. Simulation results show the formation of electron hole in the altitude range 800-2500 km over the magnetic equator. Indian zone results reveal marked differences with regard to the time of occurrence, seasonal appearances and strength of the electron hole vis-a-vis those reported for the American equatorial region.

  20. Deep Learning Based Solar Flare Forecasting Model. I. Results for Line-of-sight Magnetograms

    Science.gov (United States)

    Huang, Xin; Wang, Huaning; Xu, Long; Liu, Jinfu; Li, Rong; Dai, Xinghua

    2018-03-01

    Solar flares originate from the release of the energy stored in the magnetic field of solar active regions, the triggering mechanism for these flares, however, remains unknown. For this reason, the conventional solar flare forecast is essentially based on the statistic relationship between solar flares and measures extracted from observational data. In the current work, the deep learning method is applied to set up the solar flare forecasting model, in which forecasting patterns can be learned from line-of-sight magnetograms of solar active regions. In order to obtain a large amount of observational data to train the forecasting model and test its performance, a data set is created from line-of-sight magnetogarms of active regions observed by SOHO/MDI and SDO/HMI from 1996 April to 2015 October and corresponding soft X-ray solar flares observed by GOES. The testing results of the forecasting model indicate that (1) the forecasting patterns can be automatically reached with the MDI data and they can also be applied to the HMI data; furthermore, these forecasting patterns are robust to the noise in the observational data; (2) the performance of the deep learning forecasting model is not sensitive to the given forecasting periods (6, 12, 24, or 48 hr); (3) the performance of the proposed forecasting model is comparable to that of the state-of-the-art flare forecasting models, even if the duration of the total magnetograms continuously spans 19.5 years. Case analyses demonstrate that the deep learning based solar flare forecasting model pays attention to areas with the magnetic polarity-inversion line or the strong magnetic field in magnetograms of active regions.

  1. Model unspecific search in CMS. First results at 13 TeV

    Energy Technology Data Exchange (ETDEWEB)

    Roemer, Jonas; Albert, Andreas; Duchardt, Deborah; Hebbeker, Thomas; Knutzen, Simon; Lieb, Jonas; Meyer, Arnd; Pook, Tobias [III. Physikalisches Institut A, RWTH Aachen University (Germany)

    2016-07-01

    Following an upgrade in center of mass energy from √(s) = 8 TeV to 13 TeV, the LHC delivered first proton-proton collisions at this unprecedented energy in 2015. The CMS experiment recorded data corresponding to an integrated luminosity of 3.7 fb{sup -1}. Since many theoretical models predict signal cross sections to increase strongly with the center of mass energy, the data taken at √(s) = 13 TeV are competitive to the previous data taking period even with a lower recorded integrated luminosity. The Model Unspecific Search in CMS (MUSiC) searches for physics beyond the standard model independent of theoretical models. Using an automatic method, kinematic distributions of the data are compared with the standard model expectation in every final state. Therefore, MUSiC reduces the chance of overlooking new physics, since even distributions not covered by dedicated analyses are investigated. This talk outlines changes to the analysis made necessary by the increased center of mass energy and first results with lepton triggered events.

  2. Dermal uptake of phthalates from clothing: Comparison of model to human participant results.

    Science.gov (United States)

    Morrison, G C; Weschler, C J; Bekö, G

    2017-05-01

    In this research, we extend a model of transdermal uptake of phthalates to include a layer of clothing. When compared with experimental results, this model better estimates dermal uptake of diethylphthalate and di-n-butylphthalate (DnBP) than a previous model. The model predictions are consistent with the observation that previously exposed clothing can increase dermal uptake over that observed in bare-skin participants for the same exposure air concentrations. The model predicts that dermal uptake from clothing of DnBP is a substantial fraction of total uptake from all sources of exposure. For compounds that have high dermal permeability coefficients, dermal uptake is increased for (i) thinner clothing, (ii) a narrower gap between clothing and skin, and (iii) longer time intervals between laundering and wearing. Enhanced dermal uptake is most pronounced for compounds with clothing-air partition coefficients between 10 4 and 10 7 . In the absence of direct measurements of cotton cloth-air partition coefficients, dermal exposure may be predicted using equilibrium data for compounds in equilibrium with cellulose and water, in combination with computational methods of predicting partition coefficients. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  3. Computer simulation of Gumboro disease outbreak. II. Results obtained with models G-1 and G-2.

    Science.gov (United States)

    Takizawa, T; Ito, T; Kosuge, M; Tanaka, T; Mizumura, Y

    1978-01-01

    The authors conducted a computer simulation with their Models G-1 and G-2 for Gumboro disease ten times in each of the following initial conditions: (1) size of population, 50, 100, and 1,000 chickens; (2) age of housing, 1, 7, 14, and 21 days; (3) nine levels of parentally conferred immunity in one-day-old chicks; (4) four levels of virus contamination; and (5) three steps of coefficient for aggravating morbid status. Every simulation was operated up to the age when all the birds of a flock turned to be insusceptible so as to yield the daily numbers of chickens (1) susceptible, (2) diseased, (3) immunized, and (4) removed, and (5) the accumulation of diseased chickens. The innate resistance, parentally conferred immunity, virus contamination, and morbid status were expressed in such values that they could be compared with one another. As a result, Model G-2 produced a more realistic epizootic pattern than Model G-1, but both models concealed the effect of differences in size of population and in age of housing. Notwithstanding the incompleteness of the models, the computer simulation gave valuable information for a further advancement in this series of studies.

  4. Compilation of publication and results from project C2: Modelling of microclimates in collectors

    Energy Technology Data Exchange (ETDEWEB)

    Holck, O. [ed.

    1999-08-01

    It is important to avoid condensation in solar collectors, most of all because wetness of the absorber can damage the selective surface and cause corrosion on the absorber plate. During night time the cover of collectors will cool below ambient temperature due to thermal radiation to the cold sky. In climates where the air during night time becomes saturated with humidity (the relative humidity is 100%), condensation will form on the outside and inside of the collector glazing. If too much condensation takes place on the inside of the glazing, it will start to fall off on to the absorber surface. The intent of the present work is improvement of a existing computer model for calculation of microclimates data in collectors. Calculations with the model give insight in the humidity and temperature for artificial or realistic climatic data. This design tool makes it possible to calculate the effect of ventilation and insulation materials. Results from investigation of ventilation rates together with a model of the moisture inside the collector are built into the computer program. It has been found that modelling of the moisture transfer in backside insulation is essential to determine the humidity in the air gap of the collector. The objective is to develop guidelines for solar collector design to achieve the most favourable microclimates condition for materials. As a tool the computer model will be useful to fulfil this. Guidelines for collectors will be essential for manufactures to improve the long-term durability of solar collectors. (au)

  5. Optimising The Available Scarce Water Resources At European Scale In A Modelling Environment: Results And Challenges

    Science.gov (United States)

    de Roo, Ad; Burek, Peter; Gentile, Alessandro; Udias, Angel; Bouraoui, Faycal

    2013-04-01

    sector, the manufacturing-industry sector, the energy-production sector and the domestic sector. Also, potential flood damage of a 100-year return period flood has been used as an indicator. The study has shown that technically this modelling software environment can deliver optimum scenario combinations of packages of measures that improve various water quantity and water quality indicators, but that additional work is needed before final conclusions can be made using the tool. Further work is necessary, especially in the economic loss estimations, the water prices and price-elasticity, as well as the implementation and maintenance costs of individual scenarios. First results and challenges will be presented and discussed.

  6. Verification of simulation model with COBRA-IIIP code by confrontment of experimental results

    International Nuclear Information System (INIS)

    Silva Galetti, M.R. da; Pontedeiro, A.C.; Oliveira Barroso, A.C. de

    1985-01-01

    It is presented an evaluation of the COBRA IIIP/MIT code (of thermal hydraulic analysis by subchannels), comparing their results with experimental data obtained in stationary and transient regimes. It was done a study to calculate the spatial and temporal critical heat flux. It is presented a sensitivity study of simulation model related to the turbulent mixture and the number of axial intervals. (M.C.K.) [pt

  7. Analytical results for entanglement in the five-qubit anisotropic Heisenberg model

    International Nuclear Information System (INIS)

    Wang Xiaoguang

    2004-01-01

    We solve the eigenvalue problem of the five-qubit anisotropic Heisenberg model, without use of Bethe's ansatz, and give analytical results for entanglement and mixedness of two nearest-neighbor qubits. The entanglement takes its maximum at Δ=1 (Δ>1) for the case of zero (finite) temperature with Δ being the anisotropic parameter. In contrast, the mixedness takes its minimum at Δ=1 (Δ>1) for the case of zero (finite) temperature

  8. Fuel models and results from the TRAC-PF1/MIMAS TMI-2 accident calculation

    International Nuclear Information System (INIS)

    Schwegler, E.C.; Maudlin, P.J.

    1983-01-01

    A brief description of several fuel models used in the TRAC-PF1/MIMAS analysis of the TMI-2 accident is presented, and some of the significant fuel-rod behavior results from this analysis are given. Peak fuel-rod temperatures, oxidation heat production, and embrittlement and failure behavior calculated for the TMI-2 accident are discussed. Other aspects of fuel behavior, such as cladding ballooning and fuel-cladding eutectic formation, were found not to significantly affect the accident progression

  9. Additional Model Datasets and Results to Accelerate the Verification and Validation of RELAP-7

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Jun Soo [Idaho National Lab. (INL), Idaho Falls, ID (United States); Choi, Yong Joon [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-11-01

    The RELAP-7 code verification and validation activities are ongoing under the code assessment plan proposed in the previous document (INL-EXT-16-40015). Among the list of V&V test problems in the ‘RELAP-7 code V&V RTM (Requirements Traceability Matrix)’, the RELAP-7 7-equation model has been tested with additional demonstration problems and the results of these tests are reported in this document. In this report, we describe the testing process, the test cases that were conducted, and the results of the evaluation.

  10. Gamma spectroscopy modelization intercomparison of the modelization results using two different codes (MCNP, and Pascalys-mercure)

    International Nuclear Information System (INIS)

    Luneville, L.; Chiron, M.; Toubon, H.; Dogny, S.; Huver, M.; Berger, L.

    2001-01-01

    The research performed in common these last 3 years by the French Atomic Commission CEA, COGEMA and Eurisys Mesures had for main subject the realization of a complete tool of modelization for the largest range of realistic cases, the Pascalys modelization software. The main purpose of the modelization was to calculate the global measurement efficiency, which delivers the most accurate relationship between the photons emitted by the nuclear source in volume, punctual or deposited form and the germanium hyper pure detector, which detects and analyzes the received photons. It has been stated since long time that experimental global measurement efficiency becomes more and more difficult to address especially for complex scene as we can find in decommissioning and dismantling or in case of high activities for which the use of high activity reference sources become difficult to use for both health physics point of view and regulations. The choice of a calculation code is fundamental if accurate modelization is searched. MCNP represents the reference code but its use is long time calculation consuming and then not practicable in line on the field. Direct line-of-sight point kernel code as the French Atomic Commission 3-D analysis Mercure code can represent the practicable compromise between the most accurate MCNP reference code and the realistic performances needed in modelization. The comparison between the results of Pascalys-Mercure and MCNP code taking in account the last improvements of Mercure in the low energy range where the most important errors can occur, is presented in this paper, Mercure code being supported in line by the recent Pascalys 3-D modelization scene software. The incidence of the intrinsic efficiency of the Germanium detector is also approached for the total efficiency of measurement. (authors)

  11. Disparity of outcomes: the limits of modeling amyotrophic lateral sclerosis in murine models and translating results clinically

    Directory of Open Access Journals (Sweden)

    Pierre Zwiegers

    2015-08-01

    Full Text Available Amyotrophic lateral sclerosis (ALS is a devastatingly progressive neurodegenerative disorder with multiple underlying etiological factors contributing to disease pathogenesis. Despite intensive research efforts and therapeutic development, disease presentation in ALS remains largely intractable to intervention. To date, the most common rodent model used in pre-clinical drug development accounts for a small proportion of the affected patient population and is predicated upon the significant overexpression of a mutant form of the human antioxidant protein, superoxide dismutase 1 (mSOD1. After more than 50 clinical trials, there is an alarming paucity of positive outcomes at the clinical level of ALS therapeutics with strong supporting pre-clinical data in mSOD1 models. Potential reasons for the negative clinical results are multifactorial in nature and include an overly reductionist model system that is heavily influenced by individual transgene level variation, as well as attempting to widely apply findings derived from a model of specific genetic causality to a patient population where the majority of cases are of unknown etiology. With such a tremendous disease burden and a lack of therapeutic options, it is critical that the research community re-evaluate the dependence on mSOD1 pre-clinical models as the gold standard prior to translating findings at the clinical level. Here we briefly review both the clinical and pre-clinical findings of select therapeutics, discuss the limitations of pre-clinical mSOD1 models, and suggest future stratagems that could aid in the clinical translation of efficacious therapeutic agents. Supplementary files: The supplementary files of this article are found under 'Article Tools' at the right  side bar.

  12. Mercury Studies around the Mediterranean Sea Basin: Ten years of Measurements and Modeling results

    Directory of Open Access Journals (Sweden)

    Sprovieri F.

    2013-04-01

    Full Text Available Only a few years ago the presence of Reactive Gaseous Mercury (RGM was believed to be almost exclusively the result of anthropogenic emissions and that sustained high RGM concentrations in the MBL were not considered likely. During the past ten years, an in-depth investigation was carried out in the Marine Boundary Layer (MBL of the Mediterranean Sea to quantify and possibly explain spatial and temporal patterns of Hg-species concentrations. This paper provides an overview of modeling results and atmospheric measurements performed during several cruise campaigns performed aboard the Research Vessel (RV URANIA of the CNR over the Mediterranean sea basin. RGM concentrations have been modelled using a photochemical box model of the MBL and compared to measured data obtained during the research cruises. The comparison results supports the hypothesis that there are daytime mercury oxidation reactions occurring which have not yet been identified. Major findings of key studies carried out during ten years of ship-borne activities have been highlighted.

  13. Results from ITMIX - the Ice Thickness Models Intercomparison eXperiment

    Science.gov (United States)

    Farinotti, Daniel; Itmix Consortium, The

    2017-04-01

    Knowledge about the ice thickness distribution of a given glacier or ice cap is essential for a number of glaciological and hydrological applications. Yet, the ice thickness of the majority of worlds' ice masses remains poorly constrained. Recently, significant advances have been made in numerical methods that infer glacier ice thickness from surface characteristics, and a number of approaches have been proposed. A comprehensive assessment of their performance, however, is missing to date. Here, we present results from ITMIX - the Ice Thickness Models Intercomparison eXperiment - which was the first coordinated effort to assess the relative strengths and weaknesses of individual approaches. Operating in a working group of the International Association of Cryospheric Sciences, we present results from a total of 17 different models, applied over 21 test cases including glaciers, ice caps, and synthetic geometries. We show that the results from individual approaches can differ largely, but that combining them into an ensemble-estimate can yield significantly improvements. Comparison against direct ice thickness measurements reveals that ensemble solution can achieve accuracies in the order of 10 ± 24 % of the mean ice thickness. We additionally highlight how input-data quality can affect the estimates, and argue that better accounting for input-data uncertainty will be a key for an improved next generation of ice thickness estimation models.

  14. Comprehensive Interpretation of the Laboratory Experiments Results to Construct Model of the Polish Shale Gas Rocks

    Science.gov (United States)

    Jarzyna, Jadwiga A.; Krakowska, Paulina I.; Puskarczyk, Edyta; Wawrzyniak-Guz, Kamila; Zych, Marcin

    2018-03-01

    More than 70 rock samples from so-called sweet spots, i.e. the Ordovician Sa Formation and Silurian Ja Member of Pa Formation from the Baltic Basin (North Poland) were examined in the laboratory to determine bulk and grain density, total and effective/dynamic porosity, absolute permeability, pore diameters size, total surface area, and natural radioactivity. Results of the pyrolysis, i.e., TOC (Total Organic Carbon) together with S1 and S2 - parameters used to determine the hydrocarbon generation potential of rocks, were also considered. Elemental composition from chemical analyses and mineral composition from XRD measurements were also included. SCAL analysis, NMR experiments, Pressure Decay Permeability measurements together with water immersion porosimetry and adsorption/ desorption of nitrogen vapors method were carried out along with the comprehensive interpretation of the outcomes. Simple and multiple linear statistical regressions were used to recognize mutual relationships between parameters. Observed correlations and in some cases big dispersion of data and discrepancies in the property values obtained from different methods were the basis for building shale gas rock model for well logging interpretation. The model was verified by the result of the Monte Carlo modelling of spectral neutron-gamma log response in comparison with GEM log results.

  15. Testing the AGN unification model in the infrared. First results with GTC/CanariCam

    Science.gov (United States)

    Ramos Almeida, C.

    2015-05-01

    The unified model for Active Galactic Nuclei (AGN) accounts for a variety of observational differences in terms of viewing geometry alone. However, from the fitting of high spatial resolution infrared (IR) data with clumpy torus models, it has been hinted that the immediate dusty surroundings of Type-1 and 2 Seyfert nuclei might be intrinsically different in terms of covering factor (torus width and number of clouds). Moreover, these torus covering factors also showed variations among objects belonging to the same type, in contradiction with simple unification. Interestingly, these intrinsic differences in Seyfert tori could explain, for example, the lack of broad optical lines in the polarized spectra of about half of the brightest Seyfert 2 galaxies. On the other hand, recent IR interferometry studies have revealed that, in at least four Seyfert galaxies, the mid-IR emission is elongated in the polar direction. These results are difficult to reconcile with unified models, which claim that the bulk of the mid-IR emission comes from the torus. In this invited contribution I summarize the latest results on high angular resolution IR studies of AGN, which constitute a crucial test for AGN unification. These results include those from the mid-infrared instrument CanariCam on the 10.4 m Gran Telescopio CANARIAS (GTC), which are starting to be published by the CanariCam AGN team, Los Piratas (https://sites.google.com/site/piratasrelatedpublications).

  16. Symmetry breaking in frustrated XY models: Results from new self-consistent fluctuation approach and simulations

    Science.gov (United States)

    Behzadi, Azad Esmailov

    1999-10-01

    The critical behavior of the fully frustrated XY model has remained controversial in spite of almost two decades of related research. In this study, we have developed a new method inspired by Netz and Berker's hard-spin mean- field theory. Our approach for XY models yields results consistent with Monte Carlo simulations as the ratio of antiferromagnetic to ferromagnetic interactions is varied. The method captures two phase transitions clearly separated in temperature for ratios of 0.5, 0.6, and 1.5, with these transitions moving closer together in temperature as the interaction ratio approaches 1.0, the fully frustrated case. From the system's chirality as a function of temperature in the critical region, we calculate the critical exponent β in agreement with an Ising transition for all of the interaction ratios studied, including 1.0. This result provides support for the view that there are two transitions, rather than one transition in a new universality class, occurring in the fully frustrated XY model. Finite size effects in this model can be essentially eliminated by rescaling the local magnetization, the quantity retained self- consistently in our computations. This rescaling scheme also shows excellent results when tested on the two- dimensional Ising model, and the method, as generalized, provides a framework for an analytical approach to complex systems. Monte Carlo simulations of the fully frustrated XY model in a magnetic field provide further evidence of two transitions. The magnetic field breaks the rotational symmetry of the model, but the two-fold chiral degeneracy of the ground state persists in the field. This lower degeneracy with the field present makes Monte Carlo simulations converge more rapidly. The critical exponent δ determined from the sublattice magnetizations as a function of field agrees with the value expected for a Kosterlitz-Thouless transition. Further, the zero-field specific heat obtained by extrapolation from simulations in a

  17. Modelling the effects of phase change materials on the energy use in buildings. Results of Experiments and System Dynamics Modelling

    Energy Technology Data Exchange (ETDEWEB)

    Prins, J.

    2012-02-15

    The current era is in need for more and more sustainable energy solutions. Phase Change Materials (PCM's) are a solution for a more sustainable build environment because they can help to reduce the energy use of buildings during heating and cooling of the indoor air. This paper presents the results of recent experiments that have been executed with test boxes. In addition a System Dynamics model has been developed to find out how PCM's can be used efficiently without testing in reality. The first experiment, in which PCM's were applied in a concrete floor, shows a reduction of peak temperatures with 4C {+-} 0.7C on maximum temperatures and over 1.5C {+-} 0.7C on minimum temperatures during warm periods. The model confirmed these findings, although the predicted reductions were slightly. During the second experiment more PCM's were applied by mounting them into the walls using gypsum plasterboard to increase the latent heat capacity. Remarkably, both the experimental set-up as the model showed that the increase of PCM's (of almost 98%) causes hardly any difference compared to the first situation. Adapting the exterior in a way to absorb more solar energy, increases the average indoor temperature but decreases the reduction of peak temperatures. Again the model confirmed these findings of the experiment. These results show that the effect of PCM's varies on different climatological contexts and with different construction components physics. This means no straight forward advice on the use of PCM's for a building design can be given. The solution for this problem is provided by the model, showing that the effects of PCM's can be modelled in order to use PCM's in an effective way in different climatological contexts and with different characteristics of construction components. The research shows that a simple model is already capable of predicting PCM performance in test boxes with reasonable accuracy. Therefore it can be

  18. The UNITE-DSS Modelling System: Risk Simulation and Decision Conferencing

    DEFF Research Database (Denmark)

    Salling, Kim Bang; Barfod, Michael Bruhn

    This presentation introduces the brand new approach of integrating risk simulation and decision conferencing within transport project appraisal (UNITE-DSS model). The modelling approach is divided into various modules respectively as point estimates (cost-benefit analysis), stochastic interval...... results (quantitative risk analysis and Monte Carlo simulation) and finally framed within stakeholder involvement (decision conferencing) as depicted in the figure....

  19. Universal Principles of Depicting Oneself across the Centuries: From Renaissance Self-Portraits to Selfie-Photographs.

    Science.gov (United States)

    Carbon, Claus-Christian

    2017-01-01

    Selfie-photography is generally thought of as a cultural mass phenomenon of the early 21st century, inseparably related to the development and triumph of the smartphone with integrated camera. Western culture, however, has been highly familiar with self-depictions since the Renaissance days. Putting the contemporary selfie into this historic context covering more than five centuries of cultural development from Dürer's (1500) famous "Self-Portrait at 28" (also known as "Selbstbildnis im Pelzrock") to today's Instagram galleries allows for identifying central parallels concerning the technical and social antecedents as well as common underlying psychological factors and shared properties of different kinds of self-depiction. The article provides an overview of the types of contemporary photographic selfies and compares them with painted self-portraits. Finally, this historic perspective leads us to the insight that self-portraits as well as selfies are both referring to nothing less than the "conditio humana."

  20. Discrete Element Modeling Results of Proppant Rearrangement in the Cooke Conductivity Cell

    Energy Technology Data Exchange (ETDEWEB)

    Earl Mattson; Hai Huang; Michael Conway; Lisa O' Connell

    2014-02-01

    The study of propped fracture conductivity began in earnest with the development of the Cooke cell which later became part of the initial API standard. Subsequent developments included a patented multicell design to conduct 4 tests in a press at the same time. Other modifications have been used by various investigators. Recent studies by the Stim-Lab proppant consortium have indicated that the flow field across a Cooke proppant conductivity testing cell may not be uniform as initially believed which resulted is significantly different conductivity results. Post test analysis of low temperature metal alloy injections at the termination of proppant testing prior to the release of the applied stress suggest that higher flow is to be expected along the sides and top of the proppant pack than compared to the middle of the pack. To evaluate these experimental findings, a physics-based two-dimensional (2-D) discrete element model (DEM) was developed and applied to simulate proppant rearrangement during stress loading in the Cooke conductivity cell and the resulting porosity field. Analysis of these simulations are critical to understanding the impact of modification to the testing cell as well as understanding key proppant conductivity issues such as how these effects are manifested in proppant concentration testing results. The 2-D DEM model was constructed to represent a realistic cross section of the Cooke cell with a distribution of four material properties, three that represented the Cooke cell (steel, sandstone,square rings), and one representing the proppant. In principle, Cooke cell materials can be approximated as assemblies of independent discrete elements (particles) of various sizes and material properties that interact via cohesive interactions, repulsive forces, and frictional forces. The macroscopic behavior can then be modeled as the collective behavior of many interacting discrete elements. This DEM model is particularly suitable for modeling proppant

  1. OCAM - A CELSS modeling tool: Description and results. [Object-oriented Controlled Ecological Life Support System Analysis and Modeling

    Science.gov (United States)

    Drysdale, Alan; Thomas, Mark; Fresa, Mark; Wheeler, Ray

    1992-01-01

    Controlled Ecological Life Support System (CELSS) technology is critical to the Space Exploration Initiative. NASA's Kennedy Space Center has been performing CELSS research for several years, developing data related to CELSS design. We have developed OCAM (Object-oriented CELSS Analysis and Modeling), a CELSS modeling tool, and have used this tool to evaluate CELSS concepts, using this data. In using OCAM, a CELSS is broken down into components, and each component is modeled as a combination of containers, converters, and gates which store, process, and exchange carbon, hydrogen, and oxygen on a daily basis. Multiple crops and plant types can be simulated. Resource recovery options modeled include combustion, leaching, enzyme treatment, aerobic or anaerobic digestion, and mushroom and fish growth. Results include printouts and time-history graphs of total system mass, biomass, carbon dioxide, and oxygen quantities; energy consumption; and manpower requirements. The contributions of mass, energy, and manpower to system cost have been analyzed to compare configurations and determine appropriate research directions.

  2. Health and budget impact of combined HIV prevention - first results of the BELHIVPREV model.

    Science.gov (United States)

    Vermeersch, Sebastian; Callens, Steven; De Wit, Stéphane; Goffard, Jean-Christophe; Laga, Marie; Van Beckhoven, Dominique; Annemans, Lieven

    2018-02-01

    We developed a pragmatic modelling approach to estimate the impact of treatment as prevention (TasP); outreach testing strategies; and pre-exposure prophylaxis (PrEP) on the epidemiology of HIV and its associated pharmaceutical expenses. Our model estimates the incremental health (in terms of new HIV diagnoses) and budget impact of two prevention scenarios (outreach+TasP and outreach+TasP+PrEP) against a 'no additional prevention' scenario. Model parameters were estimated from reported Belgian epidemiology and literature data. The analysis was performed from a healthcare payer perspective with a 15-year-time horizon. It considers subpopulation differences, HIV infections diagnosed in Belgium having occurred prior to migration, and the effects of an ageing HIV population. Without additional prevention measures, the annual number of new HIV diagnoses rises to over 1350 new diagnoses in 2030 as compared to baseline, resulting in a budget expenditure of €260.5 million. Implementation of outreach+TasP and outreach+TasP+PrEP results in a decrease in the number of new HIV diagnoses to 865 and 663 per year, respectively. Respective budget impacts decrease by €20.6 million and €33.7 million. Foregoing additional investments in prevention is not an option. An approach combining TasP, outreach and PrEP is most effective in reducing the number of new HIV diagnoses and the HIV treatment budget. Our model is the first pragmatic HIV model in Belgium estimating the consequences of a combined preventive approach on the HIV epidemiology and its economic burden assuming other prevention efforts such as condom use and harm reduction strategies remain the same.

  3. Development of pictographs depicting medication use instructions for low-literacy medical clinic ambulatory patients.

    Science.gov (United States)

    Chuang, Mei-Hua; Lin, Chin-Lon; Wang, Yuh-Feng; Cham, Thau-Ming

    2010-06-01

    chose "do not understand" was significantly higher than the percentage of medical staff choosing this item. The 3 patient age groups were 60 years or younger (43.2%), aged 61 to 70 years (26.4%), and aged 71 years or older (30.4%). Preference was found to be significantly different among the 3 patient age groups in pictographs for medication administration time "before meals" (P = 0.002), "after meals" (P = 0.007), "with meals"(P = 0.037), and in the pictographs representing "half tablet" (P = 0.012) in the category of administration quantity. Comprehension was found to differ among the 3 patient age groups in pictographs representing "at bedtime" (P = 0.040), "before meal" (P = 0.022), "after meals" (P = 0.025), and "with meals" (P = 0.014) and for "one, two, or three tablets" (P = 0.041). Patients and medical staff had significant differences in preference for all categories of medical instruction pictographs and had significant differences in comprehension for the pictographs in the categories of medication administration time of day and medication administration associated with meals. Patients' preferences for and comprehension RESEARCH of the medical instruction pictographs were age-related. For successful development of a comprehensible prescription drug label, a diverse sample of patients should be consulted to ensure that the pictographs depicting medication use instructions are useful to all individuals, including those with low literacy.

  4. Introducing tropical lianas in a vegetation model, methods and first results

    Science.gov (United States)

    Verbeeck, Hans; di Porcia, Manfredo; Kearsley, Elizabeth; Longo, Marcos

    2017-04-01

    Lianas are an important component of tropical forests, commonly constituting up to 40% of the woody stems and about 35% of the woody species and contributing substantially to forest leaf biomass. Lianas compete strongly with trees for both above- and below-ground resources. Their indirect impact on the carbon balance, due to their influence on tree community dynamics (by increasing mortality and suppressing tree growth), is far larger than their direct contribution to biomass. Currently tropical forests are experiencing large-scale structural changes, including an increase in liana abundance and biomass. This may eventually reduce the projected carbon sink of tropical forests. Despite their crucial role no single terrestrial ecosystem model has included lianas so far. The goal of this work is to include lianas in a vegetation model and to test it against experimental data. For the purpose we chose ED2 (Ecosystem Demography model version 2), a model that occupies the midpoint on the continuum from gap models that contain individual trees, to area-based global models. ED2 explicitly tracks horizontal and vertical heterogeneity in canopy structure making it very suitable to study liana impacts at a large scale. At the same time, the very inner structure of the model, that is its spatial implicitness, constraints the programming design of this new liana PFT. The first part of the presentation will focus on the current representation of lianas in ED2 and the parameterization that has been used. We will provide reference to the available literature to justify the choices made for parameters and allometries. In the second part first results will be shown where we compare the output of the model with data collected in the Paracou site (French Guiana). The data comes from both inventories and fluxtowers. We will focus mainly on plant density, diameter distributions (demography) and carbon/water fluxes. By comparing runs starting from bare ground, rus starting from observed

  5. Tracer simulation using a global general circulation model: Results from a midlatitude instantaneous source experiment

    International Nuclear Information System (INIS)

    Mahlman, J.D.; Moxim, W.J.

    1978-01-01

    An 11-level general circulation model with seasonal variation is used to perform an experiment on the dispersion of passive tracers. Specially constructed time-dependent winds from this model are used as input to a separate tracer model. The methodologies employed to construct the tracer model are described.The experiment presented is the evolution of a hypothetical instantaneous source of tracer on 1 Janaury with maximum initial concentration at 65 mb, 36 0 N, 180 0 E. The tracer is assumed to have no sources or sinks in the stratosphere, but is subject to removal processes in the lower troposphere.The experimental results reveal a number of similarities to observed tracer behavior, including the average poleward-downward slope of mixing ratio isopleths, strong tracer gradients across the tropopause, intrusion of tracer into the Southern Hemisphere lower stratosphere, and the long-term interhemispheric exchange rate. The model residence times show behavior intermediate to those exhibited for particulate radioactive debris and gaseous C 14 O 2 . This suggests that caution should be employed when either radioactive debris or C 14 O 2 data are used to develop empirical models for prediction of gaseous tracers which are efficiently removed in the troposphere.In this experiment, the tracer mixing ratio and potential vorticity evolve to very high correlations. Mechanisms for this correlation are discussed. The zonal mean tracer balances exhibit complex behavior among the various transport terms. At early stages, the tracer evolution is dominated by eddy effects. Later, a very large degree of self-cancellation between mean cell and eddy effects is observed. During seasonal transitions, however, this self-cancellation diminishes markedly, leading to significant changes in the zonal mean tracer distribution. A possible theoretical explanation is presented

  6. Uncertainty and variability of infiltration at Yucca Mountain: Part 2. Model results and corroboration

    Science.gov (United States)

    Stothoff, Stuart A.

    2013-06-01

    The U.S. Nuclear Regulatory Commission actively investigated climate and infiltration at Yucca Mountain for two decades to (i) understand important controls and uncertainties influencing percolation through the unsaturated zone on multimillennial time scales and (ii) provide flux boundary conditions for up to 1 million years in performance assessment models of the proposed Yucca Mountain repository. This second part of a two-part series describes site-scale model results for present and potential future conditions and confirmatory analyses for present-day conditions. At both the grid-cell and site-average scale, the calculated uncertainty distribution for net infiltration is approximately lognormal, and the coefficient of variation decreases with increasing net infiltration. Smaller relative but larger absolute responses to climate change occur where net infiltration is large. Comparisons of distributed model estimates with temperature and geochemical observations from the unsaturated zone suggest that average estimates are generally consistent but exhibit significant variability. An observed seepage event in the South Ramp of the Exploratory Studies Facility, combined with related subsurface observations across the site, suggests that subsurface spreading from zones of high infiltration to zones of low infiltration may occur in stratabound fractures, laterally extensive discontinuities, or at transitions between welded and nonwelded tuff units. Two conceptual models for unsaturated-zone flow each explain the subsurface observations, collectively providing bounding estimates for net infiltration. Model-predicted uncertainty distribution for decadal-average site-scale net infiltration is generally consistent with estimated percolation fluxes using the bounding hypotheses, suggesting that the model-calculated uncertainty is reasonably consistent with the uncertainty in interpreting site observations.

  7. U.S. Department of Energy Reference Model Program RM1: Experimental Results.

    Energy Technology Data Exchange (ETDEWEB)

    Hill, Craig [Univ. of Minnesota, Minneapolis, MN (United States); Neary, Vincent Sinclair [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gunawan, Budi [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Guala, Michele [Univ. of Minnesota, Minneapolis, MN (United States); Sotiropoulos, Fotis [Univ. of Minnesota, Minneapolis, MN (United States)

    2017-08-01

    The Reference Model Project (RMP), sponsored by the U.S. Department of Energy’s (DOE) Wind and Water Power Technologies Program within the Office of Energy Efficiency & Renewable Energy (EERE), aims at expediting industry growth and efficiency by providing nonproprietary Reference Models (RM) of MHK technology designs as study objects for opensource research and development (Neary et al. 2014a,b). As part of this program, MHK turbine models were tested in a large open channel facility at the University of Minnesota’s St. Anthony Falls Laboratory (UMN-SAFL). Reference Model 1 (RM1) is a 1:40 geometric scale dual-rotor axial flow horizontal axis device with counter-rotating rotors, each with a rotor diameter dT = 0.5m. Precise blade angular position and torque measurements were synchronized with three acoustic Doppler velocimeters (ADVs) aligned with each rotor and the midpoint for RM1. Flow conditions for each case were controlled such that depth, h = 1m, and volumetric flow rate, Qw = 2.425m3s-1, resulting in a hub height velocity of approximately Uhub = 1.05ms-1 and blade chord length Reynolds numbers of Rec ≈ 3.0x105. Vertical velocity profiles collected in the wake of each device from 1 to 10 rotor diameters are used to estimate the velocity recovery and turbulent characteristics in the wake, as well as the interaction of the counter-rotating rotor wakes. The development of this high resolution laboratory investigation provides a robust dataset that enables assessing turbulence performance models and their ability to accurately predict device performance metrics, including computational fluid dynamics (CFD) models that can be used to predict turbulent inflow environments, reproduce wake velocity deficit, recovery and higher order turbulent statistics, as well as device performance metrics.

  8. U.S. Department of Energy Reference Model Program RM1: Experimental Results

    Energy Technology Data Exchange (ETDEWEB)

    Hill, Craig [Univ. of Minnesota, Minneapolis, MN (United States); Neary, Vincent Sinclair [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gunawan, Budi [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Guala, Michele [Univ. of Minnesota, Minneapolis, MN (United States); Sotiropoulos, Fotis [Univ. of Minnesota, Minneapolis, MN (United States)

    2014-10-01

    The Reference Model Project (RMP), sponsored by the U.S. Department of Energy’s (DOE) Wind and Water Power Technologies Program within the Office of Energy Efficiency & Renewable Energy (EERE), aims at expediting industry growth and efficiency by providing non-proprietary Reference Models (RM) of MHK technology designs as study objects for open-source research and development (Neary et al. 2014a,b). As part of this program, MHK turbine models were tested in a large open channel facility at the University of Minnesota’s St. Anthony Falls Laboratory (UMN-SAFL). Reference Model 1 (RM2) is a 1:40 geometric scale dual-rotor axial flow horizontal axis device with counter-rotating rotors, each with a rotor diameter dT = 0.5m. Precise blade angular position and torque measurements were synchronized with three acoustic Doppler velocimeters (ADVs) aligned with each rotor and the midpoint for RM1. Flow conditions for each case were controlled such that depth, h = 1m, and volumetric flow rate, Qw = 2.425m3s-1, resulting in a hub height velocity of approximately Uhub = 1.05ms-1 and blade chord length Reynolds numbers of Rec ≈ 3.0x105. Vertical velocity profiles collected in the wake of each device from 1 to 10 rotor diameters are used to estimate the velocity recovery and turbulent characteristics in the wake, as well as the interaction of the counter-rotating rotor wakes. The development of this high resolution laboratory investigation provides a robust dataset that enables assessing turbulence performance models and their ability to accurately predict device performance metrics, including computational fluid dynamics (CFD) models that can be used to predict turbulent inflow environments, reproduce wake velocity deficit, recovery and higher order turbulent statistics, as well as device performance metrics.

  9. Resolving Tropical Cyclone Intensity in Models

    Science.gov (United States)

    Davis, C. A.

    2018-02-01

    In recent years, global weather forecast models and global climate models have begun to depict intense tropical cyclones, even up to category 5 on the Saffir-Simpson scale. In light of the limitation of horizontal resolution in such models, the author performs calculations, using the extended Best Track data for Atlantic tropical cyclones, to estimate the ability of models with differing grid spacing to represent Atlantic tropical cyclone intensity statistically. Results indicate that, under optimistic assumptions, models with horizontal grid spacing of one fourth degree or coarser should not produce a realistic number of category 4 and 5 storms unless there are errors in spatial attributes of the wind field. Furthermore, the case of Irma (2017) is used to demonstrate the importance of a realistic depiction of angular momentum and to motivate the use of angular momentum in model evaluation.

  10. The Formation of the Model of Diagnosing the Results Implementation of of Consulting Projects for Enterprises

    Directory of Open Access Journals (Sweden)

    Kuzmin Oleh Ye.

    2017-11-01

    Full Text Available In the article the graphic-analytical model of diagnostics of results of implementation of consulting projects is formed, which allows to: take into consideration interests of participants to the project on choice of methods and methodologies of diagnosing; allocate alternative sets of business indicators for each object of impact in terms of consulting project; establish economic and non-economic criteria for evaluating the effectiveness of consulting, as well as monitoring of indicators and automated processing of diagnostic results to control deviations from the optimal values of the diagnosed project results. A structural-logical model of formation of alternative sets of indicators and choice of indicators for diagnostics of results of consulting projects has been developed. The elements of the enterprise management system have been codified to harmonize the corresponding indicators with their subsequent combination within the proposed sets. The control system objects and their elements have been allocated. The groups of indicators according to the technology of Balanced Score Card (BSC have been presented. The prospect of further research is the economic assessment of implementation of the diagnosed consulting projects, which will reveal the links between the parameters of production-economic activity and the assessment of projects, and allows choose the most significant ones.

  11. QCD thermodynamics from an imaginary μB: Results on the four flavor lattice model

    International Nuclear Information System (INIS)

    D'Elia, Massimo; Lombardo, Maria-Paola

    2004-01-01

    We study four flavor QCD at nonzero temperature and density by analytic continuation from an imaginary chemical potential. The explored region is T=0.95T c c , and the baryochemical potentials range from 0 to ≅500 MeV. Observables include the number density, the order parameter for chiral symmetry, and the pressure, which is calculated via an integral method at fixed temperature and quark mass. The simulations are carried out on a 16 3 x4 lattice, and the mass dependence of the results is estimated by exploiting the Maxwell relations. In the hadronic region, we confirm that the results are consistent with a simple resonance hadron gas model, and we estimate the critical density by combining the results for the number density with those for the critical line. In the hot phase, above the end point of the Roberge-Weiss transition T E ≅1.1T c , the results are consistent with a free lattice model with a fixed effective number of flavor slightly different from four. We confirm that confinement and chiral symmetry are coincident by a further analysis of the critical line, and we discuss the interrelation between thermodynamics and critical behavior. We comment on the strength and weakness of the method, and propose further developments

  12. Stress phase angle depicts differences in arterial stiffness: phantom and in vivo study

    Science.gov (United States)

    Niu, Lili; Meng, Long; Xu, Lisheng; Liu, Jia; Wang, Qiwen; Xiao, Yang; Qian, Ming; Zheng, Hairong

    2015-06-01

    The endothelial cells (ECs) lining of a blood vessel wall are exposed to both the wall shear stress (WSS) of blood flow and the circumferential strain (CS) of pulsing artery wall motion. Both WSS and CS keep involved in the modulation of ECs’ biochemical response and function and the temporal phase angle between the two is called stress phase angle (SPA). Previous studies at the cellular level have indicated that SPA is highly negative at sites that are prone to atherosclerosis, and hypothesized that large SPA may contribute to atherogenesis. Till now, there is no experimental data to support this hypothesis, probably due to the lack of a proper tool for measuring WSS and CS simultaneously and real time. In this study, a non-invasive ultrasonic biomechanics method was utilized to quantitatively calculate the SPA and experimentally evaluate the role of SPA in predicting early atherosclerosis. Three silicon tubes with a stiffness of 1.15, 3.62, 9.38 MPa were assembled in a pulsatile flow circuit and the values of SPA were measured to be -101.86 ± 3.65°,-170.19 ± 17.77° and -260.63 ± 18.62°, respectively. For the PVA-c phantoms, stiffness was 162.45, 235.68 and 374.24 kPa, the SPA corresponding to -170.32 ± 17.55°,-207.56 ± 10.78° and -261.08 ± 10.90°, respectively. Both phantom studies results demonstrated that SPA was highly negative in stiffer arteries. Further, experiments were taken in healthy living rats as control group (n = 3), atherosclerotic model group (n = 3), and drug treated group (n = 3), and the results showed that SPA was most negative in the model group, and SPA was least negative in the control group. Together, this study suggested that highly negative SPA appeared to be a prominent mechanical feature of vessels prone to atherosclerotic disease.

  13. A Summary of the NASA Lightning Nitrogen Oxides Model (LNOM) and Recent Results

    Science.gov (United States)

    Koshak, William; Peterson, Harld

    2011-01-01

    The NASA Marshall Space Flight Center introduced the Lightning Nitrogen Oxides Model (LNOM) a couple of years ago to combine routine state-of-the-art measurements of lightning with empirical laboratory results of lightning NOx production. The routine measurements included VHF lightning source data [such as from the North Alabama Lightning Mapping Array (LMA)], and ground flash location, peak current, and stroke multiplicity data from the National Lightning Detection Network(TradeMark) (NLDN). Following these initial runs of LNOM, the model was updated to include several non-return stroke lightning NOx production mechanisms, and provided the impact of lightning NOx on an August 2006 run of CMAQ. In this study, we review the evolution of the LNOM in greater detail and discuss the model?s latest upgrades and applications. Whereas previous applications were limited to five summer months of data for North Alabama thunderstorms, the most recent LNOM analyses cover several years. The latest statistics of ground and cloud flash NOx production are provided.

  14. SEMI-ANALYTIC GALAXY EVOLUTION (SAGE): MODEL CALIBRATION AND BASIC RESULTS

    Energy Technology Data Exchange (ETDEWEB)

    Croton, Darren J.; Stevens, Adam R. H.; Tonini, Chiara; Garel, Thibault; Bernyk, Maksym; Bibiano, Antonio; Hodkinson, Luke; Mutch, Simon J.; Poole, Gregory B.; Shattow, Genevieve M. [Centre for Astrophysics and Supercomputing, Swinburne University of Technology, P.O. Box 218, Hawthorn, Victoria 3122 (Australia)

    2016-02-15

    This paper describes a new publicly available codebase for modeling galaxy formation in a cosmological context, the “Semi-Analytic Galaxy Evolution” model, or sage for short.{sup 5} sage is a significant update to the 2006 model of Croton et al. and has been rebuilt to be modular and customizable. The model will run on any N-body simulation whose trees are organized in a supported format and contain a minimum set of basic halo properties. In this work, we present the baryonic prescriptions implemented in sage to describe the formation and evolution of galaxies, and their calibration for three N-body simulations: Millennium, Bolshoi, and GiggleZ. Updated physics include the following: gas accretion, ejection due to feedback, and reincorporation via the galactic fountain; a new gas cooling–radio mode active galactic nucleus (AGN) heating cycle; AGN feedback in the quasar mode; a new treatment of gas in satellite galaxies; and galaxy mergers, disruption, and the build-up of intra-cluster stars. Throughout, we show the results of a common default parameterization on each simulation, with a focus on the local galaxy population.

  15. Evolution in performance assessment modeling as a result of regulatory review

    Energy Technology Data Exchange (ETDEWEB)

    Rowat, J.H.; Dolinar, G.M.; Stephens, M.E. [AECL Chalk River Labs., Ontario (Canada)] [and others

    1995-12-31

    AECL is planning to build the IRUS (Intrusion Resistant Underground Structure) facility for near-surface disposal of LLRW. The PSAR (preliminary safety assessment report) was subject to an initial regulatory review during mid-1992. The regulatory authority provided comments on many aspects of the safety assessment documentation including a number of questions on specific PA (Performance Assessment) modelling assumptions. As a result of these comments as well as a separate detailed review of the IRUS disposal concept, changes were made to the conceptual and mathematical models. The original disposal concept included a non-sorbing vault backfill, with a strong reliance on the wasteform as a barrier. This concept was altered to decrease reliance on the wasteform by replacing the original backfill with a sand/clinoptilolite mix, which is a better sorber of metal cations. This change lead to changes in the PA models which in turn altered the safety case for the facility. This, and other changes that impacted performance assessment modelling are the subject of this paper.

  16. Recent results of full-spatial scale modeling of fast ignition and shock ignition

    Science.gov (United States)

    Tonge, J.; May, J.; Mori, W. B.; Fiuza, F.; Marti, M.; Fonseca, R. A.; Davies, J. R.; Silva, L. O.

    2010-11-01

    We show recent results of full-spatial scale modeling of fast ignition and shock ignition, from both full-PIC and the recently developed hybrid-PIC capability of OSIRIS 2.0. Our results show full-scale modeling of fast ignition over full density and time scales, where laser absorption, electron beam divergence, and energy deposition in the compressed core will be addressed in a self-consistent manner. Full-PIC and hybrid-PIC simulations of isolated targets will be presented, illustrating the importance of this type of modeling in order to accurately infer the beam divergence and transport properties. We will also demonstrate the possibility of performing full-scale simulations of shock ignition with the new hybrid-PIC capability, using compressed target profiles from hydrodynamic simulations, and studying the self-consistent laser absorption, electron transport, and energy deposition that can lead to the generation of the shock required for ignition. Work supported by DOE under DE-FC02-04-ER54789 and DE-FG52-09NA29552, and NSF under NSF-Phy-0904039, FCT (Portugal), and the HiPER project. Simulations performed on Hoffman at UCLA, Thresher at SDSC, and Intrepid at ANL supported by Incite grant FastIgnitionPIC.

  17. Latitudinal variation of perturbation electric fields during magnetically disturbed periods - 1986 Sundial observations and model results

    Science.gov (United States)

    Fejer, B. G.; Spiro, R. W.; Wolf, R. A.; Foster, J. C.

    1990-01-01

    F-region incoherent scatter radar drift observations from Millstone Hill and Jicamarca, h-prime F observations from Huancayo, and high latitude ground-magnetometer measurements taken during the Sundial 1986 campaign are used to study the relationship between plasmaspheric electric field perturbations and high latitude currents during disturbed periods. The observations are in good agreement with numerical results from a Rice Covection Model run that involved a sharp increase in the polar cap potential drop followed by a subsequent decrease. The zonal disturbance electric field pattern is latitude independent, and the corresponding amplitudes change approximately as L exp n (where n is about 1.5). The meridional electric field patterns and amplitudes have larger latitudinal variations. The mid-, low, and equatorial electric fields from the Rice Convection Model are in good agreement with previous results from the semianalytic, Senior-Blanc (1987) model. Also discussed are three physical mechanisms (over-shielding, fossil winds, and magnetic reconfiguration) that contribute to the long lasting (1-2 h) equatorial zonal electric field perturbations associated with a sudden northward turning of the IMF. It is predicted that the penetration of high latitude electric fields to low latitudes should, in general, be closely related to the rate of motion of the shielding layer and the equatorward edge of the diffuse aurora.

  18. Fugacity based modeling for pollutant fate and transport during floods. Preliminary results

    Science.gov (United States)

    Deda, M.; Fiorini, M.; Massabo, M.; Rudari, R.

    2010-09-01

    Fugacity based modeling for pollutant fate and transport during floods. Preliminary results Miranda Deda, Mattia Fiorini, Marco Massabò, Roberto Rudari One of the concerns that arises during floods is whether the wide-spreading of chemical contamination is associated with the flooding. Many potential sources of toxics releases during floods exists in cities or rural area; hydrocarbons fuel storage system, distribution facilities, commercial chemical storage, sewerage system are only few examples. When inundated homes and vehicles can also be source of toxics contaminants such as gasoline/diesel, detergents and sewage. Hazardous substances released into the environment are transported and dispersed in complex environmental systems that include air, plant, soil, water and sediment. Effective environmental models demand holistic modelling of the transport and transformation of the materials in the multimedia arena. Among these models, fugacity-based models are distribution based models incorporating all environmental compartments and are based on steady-state fluxes of pollutants across compartment interfaces (Mackay "Multimedia Environmental Models" 2001). They satisfy the primary objective of environmental chemistry which is to forecast the concentrations of pollutants in the environments with respect to space and time variables. Multimedia fugacity based-models has been used to assess contaminant distribution at very different spatial and temporal scales. The applications range from contaminant leaching to groundwater, runoff to surface water, partitioning in lakes and streams, distribution at regional and even global scale. We developped a two-dimensional fugacity based model for fate and transport of chemicals during floods. The model has three modules: the first module estimates toxins emission rates during floods; the second modules is the hydrodynamic model that simulates the water flood and the third module simulate the dynamic distribution of chemicals in

  19. The impact of basin heterogeneity on modeling results of two tributaries of the Okavango River

    Science.gov (United States)

    Baumberg, V.; Goehmann, H.; Steudel, T.; Fluegel, W.; Helmschrot, J.

    2013-12-01

    The two river systems Cuito (57.300 km2) and Cubango (103.800 km2) drain the south-eastern parts of Angola forming the Okavango River after their confluence and thus providing ca. 95 % of the Okavango River discharge. Although located side by side and therefore exposed to similar climatic and environmental conditions, runoff records indicate that both basins differ regarding their hydrological system dynamics. The Cubango is known for rapid discharges with comparatively high runoff peaks during the rainy season and low base flow during the dry season whereas the runoff of the Cuito appears more balanced. The differences in the runoff dynamics of both basins are mainly caused by heterogeneous geological conditions or terrain features. While the headwater region of the Cubango is underlain by igneous bedrock, the Cuito catchment is covered with thick Kalahari sand layers. The headwaters of the Cubango system are characterized by steep valleys carved into the crystalline bedrock. Thus, storage capacities are low and a higher percentage of the precipitation is transferred to direct runoff. In contrast, the meandering rivers of the Cuito system are embedded in wide valleys with alluvial swamps and floodplains that offer high water storage capacities. This spatial pattern generating different hydrological dynamics in both basins was neglected in previous modeling studies focusing on the Okavango River basin system. To better understand and assess the influence of geological structures, terrain, climate, soils, and land cover on the spatio-temporal variability of hydrological components and runoff generation mechanisms, the distributed J2000g model and the concept of Hydrological Response Units (HRU) were applied to both tributaries. Model exercises were carried out on a monthly basis for the period 1962-1975. Both models provide sufficient results of the spatio-temporal runoff pattern in both tributaries for the entire period. Good fits for dry and moderate conditions

  20. Silent game as Model for Examining Student Online Creativity - Preliminary Results from an Experiment

    DEFF Research Database (Denmark)

    Sørensen, Jannick Kirk

    2016-01-01

    -called “Silent game” (Habraken & Gross, 1988). But where Habraken et al.’s research in design games focussed on how professional architects and designers collaborate, we examine the potential of Silent game as model for researching online creative collaboration among students. This paper presents the results...... of the experiment and a tentative analysis. The aim is to discuss the possibilities in using Silent game as a model for examining and improving online creativity.......The ERASMUS+ project “OnCreate” aims at improving online mediated creative collaboration among students. But what are the differences between collaboration online and in a face-to-face setting in terms of creative processes? Theories on media richness and collaborative creativity can provide...

  1. Measurements of entanglement over a kilometric distance to test superluminal models of Quantum Mechanics: preliminary results.

    Science.gov (United States)

    Cocciaro, B.; Faetti, S.; Fronzoni, L.

    2017-08-01

    As shown in the EPR paper (Einstein, Podolsky e Rosen, 1935), Quantum Mechanics is a non-local Theory. The Bell theorem and the successive experiments ruled out the possibility of explaining quantum correlations using only local hidden variables models. Some authors suggested that quantum correlations could be due to superluminal communications that propagate isotropically with velocity vt > c in a preferred reference frame. For finite values of vt and in some special cases, Quantum Mechanics and superluminal models lead to different predictions. So far, no deviations from the predictions of Quantum Mechanics have been detected and only lower bounds for the superluminal velocities vt have been established. Here we describe a new experiment that increases the maximum detectable superluminal velocities and we give some preliminary results.

  2. Field studies of submerged-diffuser thermal plumes with comparisons to predictive model results

    International Nuclear Information System (INIS)

    Frigo, A.A.; Paddock, R.A.; Ditmars, J.D.

    1976-01-01

    Thermal plumes from submerged discharges of cooling water from two power plants on Lake Michigan were studied. The system for the acquisition of water temperatures and ambient conditions permitted the three-dimensional structure of the plumes to be determined. The Zion Nuclear Power Station has two submerged discharge structures separated by only 94 m. Under conditions of flow from both structures, interaction between the two plumes resulted in larger thermal fields than would be predicted by the superposition of single non-interacting plumes. Maximum temperatures in the near-field region of the plume compared favorably with mathematical model predictions. A comparison of physical-model predictions for the plume at the D. C. Cook Nuclear Plant with prototype measurements indicated good agreement in the near-field region, but differences in the far-field occurred as similitude was not preserved there

  3. Model of a realistic InP surface quantum dot extrapolated from atomic force microscopy results

    Science.gov (United States)

    Barettin, Daniele; De Angelis, Roberta; Prosposito, Paolo; Auf der Maur, Matthias; Casalboni, Mauro; Pecchia, Alessandro

    2014-05-01

    We report on numerical simulations of a zincblende InP surface quantum dot (QD) on \\text{I}{{\\text{n}}_{0.48}}\\text{G}{{\\text{a}}_{0.52}}\\text{P} buffer. Our model is strictly based on experimental structures, since we extrapolated a three-dimensional dot directly by atomic force microscopy results. Continuum electromechanical, \\vec{k}\\;\\cdot \\;\\vec{p} bandstructure and optical calculations are presented for this realistic structure, together with benchmark calculations for a lens-shape QD with the same radius and height of the extrapolated dot. Interesting similarities and differences are shown by comparing the results obtained with the two different structures, leading to the conclusion that the use of a more realistic structure can provide significant improvements in the modeling of QDs fact, the remarkable splitting for the electron p-like levels of the extrapolated dot seems to prove that a realistic experimental structure can reproduce the right symmetry and a correct splitting usually given by atomistic calculations even within the multiband \\vec{k}\\;\\cdot \\;\\vec{p} approach. Moreover, the energy levels and the symmetry of the holes are strongly dependent on the shape of the dot. In particular, as far as we know, their wave function symmetries do not seem to resemble to any results previously obtained with simulations of zincblende ideal structures, such as lenses or truncated pyramids. The magnitude of the oscillator strengths is also strongly dependent on the shape of the dot, showing a lower intensity for the extrapolated dot, especially for the transition between the electrons and holes ground state, as a result of a relevant reduction of the wave functions overlap. We also compare an experimental photoluminescence spectrum measured on an homogeneous sample containing about 60 dots with a numerical ensemble average derived from single dot calculations. The broader energy range of the numerical spectrum motivated us to perform further

  4. Model of a realistic InP surface quantum dot extrapolated from atomic force microscopy results.

    Science.gov (United States)

    Barettin, Daniele; De Angelis, Roberta; Prosposito, Paolo; Auf der Maur, Matthias; Casalboni, Mauro; Pecchia, Alessandro

    2014-05-16

    We report on numerical simulations of a zincblende InP surface quantum dot (QD) on In₀.₄₈Ga₀.₅₂ buffer. Our model is strictly based on experimental structures, since we extrapolated a three-dimensional dot directly by atomic force microscopy results. Continuum electromechanical, [Formula: see text] bandstructure and optical calculations are presented for this realistic structure, together with benchmark calculations for a lens-shape QD with the same radius and height of the extrapolated dot. Interesting similarities and differences are shown by comparing the results obtained with the two different structures, leading to the conclusion that the use of a more realistic structure can provide significant improvements in the modeling of QDs fact, the remarkable splitting for the electron p-like levels of the extrapolated dot seems to prove that a realistic experimental structure can reproduce the right symmetry and a correct splitting usually given by atomistic calculations even within the multiband [Formula: see text] approach. Moreover, the energy levels and the symmetry of the holes are strongly dependent on the shape of the dot. In particular, as far as we know, their wave function symmetries do not seem to resemble to any results previously obtained with simulations of zincblende ideal structures, such as lenses or truncated pyramids. The magnitude of the oscillator strengths is also strongly dependent on the shape of the dot, showing a lower intensity for the extrapolated dot, especially for the transition between the electrons and holes ground state, as a result of a relevant reduction of the wave functions overlap. We also compare an experimental photoluminescence spectrum measured on an homogeneous sample containing about 60 dots with a numerical ensemble average derived from single dot calculations. The broader energy range of the numerical spectrum motivated us to perform further verifications, which have clarified some aspects of the experimental

  5. Impact of the volume of gaseous phase in closed reactors on ANC results and modelling

    Science.gov (United States)

    Drapeau, Clémentine; Delolme, Cécile; Lassabatere, Laurent; Blanc, Denise

    2016-04-01

    The understanding of the geochemical behavior of polluted solid materials is often challenging and requires huge expenses of time and money. Nevertheless, given the increasing amounts of polluted solid materials and related risks for the environment, it is more and more crucial to understand the leaching of majors and trace metals elements from these matrices. In the designs of methods to quantify pollutant solubilization, the combination of experimental procedures with modeling approaches has recently gained attention. Among usual methods, some rely on the association of ANC and geochemical modeling. ANC experiments - Acid Neutralization Capacity - consists in adding known quantities of acid or base to a mixture of water and contaminated solid materials at a given liquid / solid ratio in closed reactors. Reactors are agitated for 48h and then pH, conductivity, redox potential, carbon, majors and heavy metal solubilized are quantified. However, in most cases, the amounts of matrix and water do not reach the total volume of reactors, leaving some space for air (gaseous phase). Despite this fact, no clear indication is given in standard procedures about the effect of this gaseous phase. Even worse, the gaseous phase is never accounted for when exploiting or modeling ANC data. The gaseous phase may exchange CO2 with the solution, which may, in turn, impact both pH and element release. This study lies within the most general framework for the use of geochemical modeling for the prediction of ANC results for the case of pure phases to real phase assemblages. In this study, we focus on the effect of the gaseous phase on ANC experiments on different mineral phases through geochemical modeling. To do so, we use PHREEQC code to model the evolution of pH and element release (including majors and heavy metals) when several matrices are put in contact with acid or base. We model the following scenarios for the gaseous phase: no gas, contact with the atmosphere (open system

  6. Equilibrium resurfacing of Venus: Results from new Monte Carlo modeling and implications for Venus surface histories

    Science.gov (United States)

    Bjonnes, E. E.; Hansen, V. L.; James, B.; Swenson, J. B.

    2012-02-01

    Venus' impact crater population imposes two observational constraints that must be met by possible model surface histories: (1) near random spatial distribution of ˜975 craters, and (2) few obviously modified impact craters. Catastrophic resurfacing obviously meets these constraints, but equilibrium resurfacing histories require a balance between crater distribution and modification to be viable. Equilibrium resurfacing scenarios with small incremental resurfacing areas meet constraint 1 but not 2, whereas those with large incremental resurfacing areas meet constraint 2 but not 1. Results of Monte Carlo modeling of equilibrium resurfacing ( Strom et al., 1994) is widely cited as support for catastrophic resurfacing hypotheses and as evidence against hypotheses of equilibrium resurfacing. However, the Monte Carlo models did not consider intermediate-size incremental resurfacing areas, nor did they consider histories in which the era of impact crater formation outlasts an era of equilibrium resurfacing. We construct three suites of Monte Carlo experiments that examine incremental resurfacing areas not previously considered (5%, 1%, 0.7%, and 0.1%), and that vary the duration of resurfacing relative to impact crater formation time (1:1 [suite A], 5:6 [suite B], and 2:3 [suite C]). We test the model results against the two impact crater constraints. Several experiments met both constraints. The shorter the time period of equilibrium resurfacing, or the longer the time of crater formation following the cessation of equilibrium resurfacing, the larger the possible areas of incremental resurfacing that satisfy both constraints. Equilibrium resurfacing is statistically viable for suite A at 0.1%, suite B at 0.1%, and suite C for 1%, 0.7%, and 0.1% areas of incremental resurfacing.

  7. Mesoscopic models for DNA stretching under force: New results and comparison with experiments.

    Science.gov (United States)

    Manghi, Manoel; Destainville, Nicolas; Palmeri, John

    2012-10-01

    Single-molecule experiments on double-stranded B-DNA stretching have revealed one or two structural transitions, when increasing the external force. They are characterized by a sudden increase of DNA contour length and a decrease of the bending rigidity. The nature and the critical forces of these transitions depend on DNA base sequence, loading rate, salt conditions and temperature. It has been proposed that the first transition, at forces of 60-80 pN, is a transition from B to S-DNA, viewed as a stretched duplex DNA, while the second one, at stronger forces, is a strand peeling resulting in single-stranded DNAs (ssDNA), similar to thermal denaturation. But due to experimental conditions these two transitions can overlap, for instance for poly(dA-dT). In an attempt to propose a coherent picture compatible with this variety of experimental observations, we derive an analytical formula using a coupled discrete worm-like chain-Ising model. Our model takes into account bending rigidity, discreteness of the chain, linear and non-linear (for ssDNA) bond stretching. In the limit of zero force, this model simplifies into a coupled model already developed by us for studying thermal DNA melting, establishing a connection with previous fitting parameter values for denaturation profiles. Our results are summarized as follows: i) ssDNA is fitted, using an analytical formula, over a nano-Newton range with only three free parameters, the contour length, the bending modulus and the monomer size; ii) a surprisingly good fit on this force range is possible only by choosing a monomer size of 0.2 nm, almost 4 times smaller than the ssDNA nucleobase length; iii) mesoscopic models are not able to fit B to ssDNA (or S to ss) transitions; iv) an analytical formula for fitting B to S transitions is derived in the strong force approximation and for long DNAs, which is in excellent agreement with exact transfer matrix calculations; v) this formula fits perfectly well poly(dG-dC) and

  8. Practical models to estimate horizontal irradiance in clear sky conditions: Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, German A.; Hernandez, Alejandro L.; Saravia, Luis R. [Department of Physics, School of Exact Sciences, National University of Salta, Bolivia Avenue 5150, 4400 Salta Capital (Argentina); INENCO (Institute of Non Conventional Energy Research), Bolivia Avenue 5150, 4400 Salta Capital (Argentina)

    2010-11-15

    The Argentinean Northwest (ANW) is a high altitude region located alongside Los Andes Mountains. The ANW is also one of the most insolated regions in the world due to its altitude and particular climate. However, the characterization of the solar resource in the region is incomplete as there are no stations to measure solar radiation continuously and methodically. With irradiance data recently having been measured at three sites in the Salta Province, a study was carried out that resulted in a practical model to quickly and efficiently estimate the horizontal irradiance in high altitude sites in clear sky conditions. This model uses the altitude above sea level (A) as a variable and generates a representative clearness index as a result (k{sub t-R}) that is calculated for each site studied. This index k{sub t-R} is then used with the relative optical air mass and the extraterrestrial irradiance to estimate the instantaneous clearness index (k{sub t}). Subsequently, the index k{sub t-R} is corrected by introducing the atmospheric pressure in the definition of relative optical air mass proposed by Kasten. The results are satisfactory as errors in the irradiance estimations with respect to measured values do not exceed 5% for pressure corrected air masses AM{sub c} < 2. This model will be used in a feasibility study to locate sites for the installation of solar thermal power plants in the ANW. A prototype of a CLFR solar power plant is being built in the INENCO Campus, at the National University of Salta. (author)

  9. Targeted screening of individuals at high risk for pancreatic cancer: results of a simulation model.

    Science.gov (United States)

    Pandharipande, Pari V; Heberle, Curtis; Dowling, Emily C; Kong, Chung Yin; Tramontano, Angela; Perzan, Katherine E; Brugge, William; Hur, Chin

    2015-04-01

    To identify when, from the standpoint of relative risk, magnetic resonance (MR) imaging-based screening may be effective in patients with a known or suspected genetic predisposition to pancreatic cancer. The authors developed a Markov model of pancreatic ductal adenocarcinoma (PDAC). The model was calibrated to National Cancer Institute Surveillance, Epidemiology, and End Results registry data and informed by the literature. A hypothetical screening strategy was evaluated in which all population individuals underwent one-time MR imaging screening at age 50 years. Screening outcomes for individuals with an average risk for PDAC ("base case") were compared with those for individuals at an increased risk to assess for differential benefits in populations with a known or suspected genetic predisposition. Effects of varying key inputs, including MR imaging performance, surgical mortality, and screening age, were evaluated with a sensitivity analysis. RESULTS In the base case, screening resulted in a small number of cancer deaths averted (39 of 100 000 men, 38 of 100 000 women) and a net decrease in life expectancy (-3 days for men, -4 days for women), which was driven by unnecessary pancreatic surgeries associated with false-positive results. Life expectancy gains were achieved if an individual's risk for PDAC exceeded 2.4 (men) or 2.7 (women) times that of the general population. When relative risk increased further, for example to 30 times that of the general population, averted cancer deaths and life expectancy gains increased substantially (1219 of 100 000 men, life expectancy gain: 65 days; 1204 of 100 000 women, life expectancy gain: 71 days). In addition, results were sensitive to MR imaging specificity and the surgical mortality rate. Although PDAC screening with MR imaging for the entire population is not effective, individuals with even modestly increased risk may benefit. © RSNA, 2014 Online supplemental material is available for this article.

  10. Results from the direct search for the Standard Model Higgs boson at LEP

    CERN Document Server

    Marco, Jesus

    2001-01-01

    The direct search for the Standard Model Higgs boson at LEP, using 2.5 fb−1 of e+e− collision data collected and analyzed by the four LEP collaborations, ALEPH, DELPHI, L3 and OPAL, at center-of-mass energies between 189 and 209 GeV, is pre- sented. The combination of their results by the LEP Higgs Working Group sets a lower bound for the SM Higgs boson mass of 114.1 GeV/c2 at the 95% confidence level. The excess observed in the higher mass zone, with a significance at the 2 σ level, is described.

  11. Vertical Instability in EAST: Comparison of Model Predictions with Experimental Results

    International Nuclear Information System (INIS)

    Qian Jinping; Wan Baonian; Shen Biao; Xiao Bingjia; Sun Youwen; Shi Yuejiang; Lin Shiyao; Li Jiangang; Gong Xianzu

    2008-01-01

    Growth rates of the axisymmetric mode in elongated plasmas in the experimental advanced superconducting tokamak (EAST) are measured with zero feedback gains and then compared with numerically calculated growth rates for the reconstructed shapes. The comparison is made after loss of vertical position control. The open-loop growth rates were scanned with the number of vessel eigenmodes, which up to 20 is enough to make the growth rates settled. The agreement between the growth rates measured experimentally and the growth rates determined numerically is good. The results show that a linear RZIP model is essentially good enough for the vertical position feedback control.

  12. Snpdat: Easy and rapid annotation of results from de novo snp discovery projects for model and non-model organisms

    Directory of Open Access Journals (Sweden)

    Doran Anthony G

    2013-02-01

    Full Text Available Abstract Background Single nucleotide polymorphisms (SNPs are the most abundant genetic variant found in vertebrates and invertebrates. SNP discovery has become a highly automated, robust and relatively inexpensive process allowing the identification of many thousands of mutations for model and non-model organisms. Annotating large numbers of SNPs can be a difficult and complex process. Many tools available are optimised for use with organisms densely sampled for SNPs, such as humans. There are currently few tools available that are species non-specific or support non-model organism data. Results Here we present SNPdat, a high throughput analysis tool that can provide a comprehensive annotation of both novel and known SNPs for any organism with a draft sequence and annotation. Using a dataset of 4,566 SNPs identified in cattle using high-throughput DNA sequencing we demonstrate the annotations performed and the statistics that can be generated by SNPdat. Conclusions SNPdat provides users with a simple tool for annotation of genomes that are either not supported by other tools or have a small number of annotated SNPs available. SNPdat can also be used to analyse datasets from organisms which are densely sampled for SNPs. As a command line tool it can easily be incorporated into existing SNP discovery pipelines and fills a niche for analyses involving non-model organisms that are not supported by many available SNP annotation tools. SNPdat will be of great interest to scientists involved in SNP discovery and analysis projects, particularly those with limited bioinformatics experience.

  13. PBT assessment and prioritization by PBT Index and consensus modeling: comparison of screening results from structural models.

    Science.gov (United States)

    Gramatica, Paola; Cassani, Stefano; Sangion, Alessandro

    2015-04-01

    The limited availability of comprehensive data for Persistence, Bioaccumulation and Toxicity (PBT) of chemicals is a serious hindrance to the assignment of compounds to the categories of PBT and vPvB; REACH regulation requires authorization for the use of such chemicals, and additionally plans for safer alternatives. In the context of screening and priority-setting tools for PBT-assessment, the cumulative PBT Index model, implemented in QSARINS (QSAR-INSUBRIA), new software tool for the development and validation of multiple linear regression QSAR models, offers a new holistic approach for the identification of chemicals with cumulative PBT properties directly from their molecular structure. In this study the Insubria PBT Index in QSARINS is applied to the screening and prioritization of various data sets, containing a large variety of chemicals of heterogeneous molecular structure, previously screened by various authors by different methods, for their potential PBT behavior. Particular attention is devoted to the model Applicability Domain, using different approaches such as Descriptor Range, Leverage, and Principal Component Analysis (PCA) of the modeling molecular descriptors, in order to discriminate between interpolated and extrapolated predictions. The results of this screening, which is based only on the molecular structure features and is not dependent on single threshold values for P, B and T, are compared with those obtained by the on-line US-EPA PBT Profiler. Good agreement between the various approaches is found, supporting the utility of a consensus approach in priority-setting studies. The main discrepancies are highlighted and commented on. Moreover, a priority list containing the most hazardous compounds identified in agreement between the two tools is drafted. The PBT Index, implemented in QSARINS, which was demonstrated to be a practical, precautionary and reliable screening tool for PBT-behavior directly from the molecular structure, can be

  14. Modeling of Particle Acceleration at Multiple Shocks via Diffusive Shock Acceleration: Preliminary Results

    Science.gov (United States)

    Parker, L. Neergaard; Zank, G. P.

    2013-01-01

    Successful forecasting of energetic particle events in space weather models require algorithms for correctly predicting the spectrum of ions accelerated from a background population of charged particles. We present preliminary results from a model that diffusively accelerates particles at multiple shocks. Our basic approach is related to box models in which a distribution of particles is diffusively accelerated inside the box while simultaneously experiencing decompression through adiabatic expansion and losses from the convection and diffusion of particles outside the box. We adiabatically decompress the accelerated particle distribution between each shock by either the method explored in Melrose and Pope (1993) and Pope and Melrose (1994) or by the approach set forth in Zank et al. (2000) where we solve the transport equation by a method analogous to operator splitting. The second method incorporates the additional loss terms of convection and diffusion and allows for the use of a variable time between shocks. We use a maximum injection energy (E(sub max)) appropriate for quasi-parallel and quasi-perpendicular shocks and provide a preliminary application of the diffusive acceleration of particles by multiple shocks with frequencies appropriate for solar maximum (i.e., a non-Markovian process).

  15. RC Beams Strengthened with Mechanically Fastened Composites: Experimental Results and Numerical Modeling

    Directory of Open Access Journals (Sweden)

    Enzo Martinelli

    2014-03-01

    Full Text Available The use of mechanically-fastened fiber-reinforced polymer (MF-FRP systems has recently emerged as a competitive solution for the flexural strengthening of reinforced concrete (RC beams and slabs. An overview of the experimental research has proven the effectiveness and the potentiality of the MF-FRP technique which is particularly suitable for emergency repairs or when the speed of installation and immediacy of use are imperative. A finite-element (FE model has been recently developed by the authors with the aim to simulate the behavior of RC beams strengthened in bending by MF-FRP laminates; such a model has also been validated by using a wide experimental database collected from the literature. By following the previous study, the FE model and the assembled database are considered herein with the aim of better exploring the influence of some specific aspects on the structural response of MF-FRP strengthened members, such as the bearing stress-slip relationship assumed for the FRP-concrete interface, the stress-strain law considered for reinforcing steel rebars and the cracking process in RC members resulting in the well-known tension stiffening effect. The considerations drawn from this study will be useful to researchers for the calibration of criteria and design rules for strengthening RC beams through MF-FRP laminates.

  16. Insight into collision zone dynamics from topography: numerical modelling results and observations

    Directory of Open Access Journals (Sweden)

    A. D. Bottrill

    2012-11-01

    Full Text Available Dynamic models of subduction and continental collision are used to predict dynamic topography changes on the overriding plate. The modelling results show a distinct evolution of topography on the overriding plate, during subduction, continental collision and slab break-off. A prominent topographic feature is a temporary (few Myrs basin on the overriding plate after initial collision. This "collisional mantle dynamic basin" (CMDB is caused by slab steepening drawing, material away from the base of the overriding plate. Also, during this initial collision phase, surface uplift is predicted on the overriding plate between the suture zone and the CMDB, due to the subduction of buoyant continental material and its isostatic compensation. After slab detachment, redistribution of stresses and underplating of the overriding plate cause the uplift to spread further into the overriding plate. This topographic evolution fits the stratigraphy found on the overriding plate of the Arabia-Eurasia collision zone in Iran and south east Turkey. The sedimentary record from the overriding plate contains Upper Oligocene-Lower Miocene marine carbonates deposited between terrestrial clastic sedimentary rocks, in units such as the Qom Formation and its lateral equivalents. This stratigraphy shows that during the Late Oligocene–Early Miocene the surface of the overriding plate sank below sea level before rising back above sea level, without major compressional deformation recorded in the same area. Our modelled topography changes fit well with this observed uplift and subsidence.

  17. Model predictions and experimental results on self-heating prevention of stockpiled coals

    Energy Technology Data Exchange (ETDEWEB)

    Fierro, V.; Miranda, J.L.; Romero, C.; Andres, J.M.; Arriaga, A.; Schmal, D. [Instituto de Carboquimica, Zaragoza (Spain)

    2001-01-01

    The spontaneous combustion of coal stockpiles is a serious economic and safety problem. This phenomenon is analysed using a TNO-model modified to predict the spontaneous heating behaviour of coal piles built with 'Mezcla', a mixture of low rank coals from Teruel (Spain). The simulation carried out with the mathematical model for this coal showed that the pile porosity or voidage and wind speed play an important role, although voidage is decisive and controls the effect of the wind velocity. To reduce the negative effects of both factors, five test coal piles (2000-3000 t) were built and several measures were applied to four of them: periodic compaction, use of a low angle slope, protection of the stockpiled coal with an artificial wind barrier and covering it with an ash-water slurry. The heat losses were experimentally determined and it was found that the mathematical model gave predictions of the right order of magnitude of time, site of spontaneous combustion and magnitude of calorific losses. All the methods of protection applied to decrease the self-heating of coal were effective, but the experimental results indicate that the most economical way to avoid the heat losses is the use of an ash-water slurry to cover the coal pile. 28 refs., 8 figs., 5 tabs.

  18. MELMRK 2. 0: A description of computer models and results of code testing

    Energy Technology Data Exchange (ETDEWEB)

    Wittman, R.S. (ed.) (Westinghouse Savannah River Co., Aiken, SC (United States)); Denny, V.; Mertol, A. (Science Applications International Corp., Los Atlos, CA (United States))

    1992-05-31

    An advanced version of the MELMRK computer code has been developed that provides detailed models for conservation of mass, momentum, and thermal energy within relocating streams of molten metallics during meltdown of Savannah River Site (SRS) reactor assemblies. In addition to a mechanistic treatment of transport phenomena within a relocating stream, MELMRK 2.0 retains the MOD1 capability for real-time coupling of the in-depth thermal response of participating assembly heat structure and, further, augments this capability with models for self-heating of relocating melt owing to steam oxidation of metallics and fission product decay power. As was the case for MELMRK 1.0, the MOD2 version offers state-of-the-art numerics for solving coupled sets of nonlinear differential equations. Principal features include application of multi-dimensional Newton-Raphson techniques to accelerate convergence behavior and direct matrix inversion to advance primitive variables from one iterate to the next. Additionally, MELMRK 2.0 provides logical event flags for managing the broad range of code options available for treating such features as (1) coexisting flow regimes, (2) dynamic transitions between flow regimes, and (3) linkages between heatup and relocation code modules. The purpose of this report is to provide a detailed description of the MELMRK 2.0 computer models for melt relocation. Also included are illustrative results for code testing, as well as an integrated calculation for meltdown of a Mark 31a assembly.

  19. MELMRK 2.0: A description of computer models and results of code testing

    Energy Technology Data Exchange (ETDEWEB)

    Wittman, R.S. [ed.] [Westinghouse Savannah River Co., Aiken, SC (United States); Denny, V.; Mertol, A. [Science Applications International Corp., Los Atlos, CA (United States)

    1992-05-31

    An advanced version of the MELMRK computer code has been developed that provides detailed models for conservation of mass, momentum, and thermal energy within relocating streams of molten metallics during meltdown of Savannah River Site (SRS) reactor assemblies. In addition to a mechanistic treatment of transport phenomena within a relocating stream, MELMRK 2.0 retains the MOD1 capability for real-time coupling of the in-depth thermal response of participating assembly heat structure and, further, augments this capability with models for self-heating of relocating melt owing to steam oxidation of metallics and fission product decay power. As was the case for MELMRK 1.0, the MOD2 version offers state-of-the-art numerics for solving coupled sets of nonlinear differential equations. Principal features include application of multi-dimensional Newton-Raphson techniques to accelerate convergence behavior and direct matrix inversion to advance primitive variables from one iterate to the next. Additionally, MELMRK 2.0 provides logical event flags for managing the broad range of code options available for treating such features as (1) coexisting flow regimes, (2) dynamic transitions between flow regimes, and (3) linkages between heatup and relocation code modules. The purpose of this report is to provide a detailed description of the MELMRK 2.0 computer models for melt relocation. Also included are illustrative results for code testing, as well as an integrated calculation for meltdown of a Mark 31a assembly.

  20. Modeling the Capacity and Emissions Impacts of Reduced Electricity Demand. Part 1. Methodology and Preliminary Results

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, Katie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Shen, Hongxia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Chan, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; McDevitt, Brian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Sturges, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

    2013-02-07

    Policies aimed at energy conservation and efficiency have broad environmental and economic impacts. Even if these impacts are relatively small, they may be significant compared to the cost of implementing the policy. Methodologies that quantify the marginal impacts of reduced demand for energy have an important role to play in developing accurate measures of both the benefits and costs of a given policy choice. This report presents a methodology for estimating the impacts of reduced demand for electricity on the electric power sector as a whole. The approach uses the National Energy Modeling System (NEMS), a mid-range energy forecast model developed and maintained by the U.S. Department of Energy, Energy Information Administration (EIA)(DOE EIA 2013). The report is organized as follows: In the rest of this section the traditional NEMS-BT approach is reviewed and an outline of the new reduced form NEMS methodology is presented. Section 2 provides an overview of how the NEMS model works, and describes the set of NEMS-BT runs that are used as input to the reduced form approach. Section 3 presents our NEMS-BT simulation results and post-processing methods. In Section 4 we show how the NEMS-BT output can be generalized to apply to a broader set of end-uses. In Section 5 we disuss the application of this approach to policy analysis, and summarize some of the issues that will be further investigated in Part 2 of this study.

  1. Results from the long-term interaction and modeling of SRL-131 glass with aqueous solutions

    International Nuclear Information System (INIS)

    Strachan, D.M.; Pederson, L.R.; Lokken, R.O.

    1985-11-01

    Leaching studies on SRL-131 simulated defense waste glass have been carried out for a duration of two years. This glass contained nonradioactive elements and depleted uranium to simulate the waste content. The leachants used in this study were deionized water, a sodium bicarbonate/silicic acid solution (silicate water), a synthetic groundwater, and a high ionic strength K-Mg-Na-Cl brine. Two temperatures were used: 40 0 C and 90 0 C. The long-term results were in fair agreement with modeling calculations performed using the PHREEQE geochemical code. The leachability of SRL-131 glass from results up to two years followed the trend: deionized water > silicate water > synthetic groundwater > salt brine at 40 0 C and deionized water approx. = synthetic groundwater > silicate water > salt brine at 90 0 C. Solid state analyses are reported along with an Appendix containing a complete data set

  2. Deconstruction of archaeal genome depict strategic consensus in core pathways coding sequence assembly.

    Directory of Open Access Journals (Sweden)

    Ayon Pal

    Full Text Available A comprehensive in silico analysis of 71 species representing the different taxonomic classes and physiological genre of the domain Archaea was performed. These organisms differed in their physiological attributes, particularly oxygen tolerance and energy metabolism. We explored the diversity and similarity in the codon usage pattern in the genes and genomes of these organisms, emphasizing on their core cellular pathways. Our thrust was to figure out whether there is any underlying similarity in the design of core pathways within these organisms. Analyses of codon utilization pattern, construction of hierarchical linear models of codon usage, expression pattern and codon pair preference pointed to the fact that, in the archaea there is a trend towards biased use of synonymous codons in the core cellular pathways and the Nc-plots appeared to display the physiological variations present within the different species. Our analyses revealed that aerobic species of archaea possessed a larger degree of freedom in regulating expression levels than could be accounted for by codon usage bias alone. This feature might be a consequence of their enhanced metabolic activities as a result of their adaptation to the relatively O2-rich environment. Species of archaea, which are related from the taxonomical viewpoint, were found to have striking similarities in their ORF structuring pattern. In the anaerobic species of archaea, codon bias was found to be a major determinant of gene expression. We have also detected a significant difference in the codon pair usage pattern between the whole genome and the genes related to vital cellular pathways, and it was not only species-specific but pathway specific too. This hints towards the structuring of ORFs with better decoding accuracy during translation. Finally, a codon-pathway interaction in shaping the codon design of pathways was observed where the transcription pathway exhibited a significantly different coding

  3. Deconstruction of archaeal genome depict strategic consensus in core pathways coding sequence assembly.

    Science.gov (United States)

    Pal, Ayon; Banerjee, Rachana; Mondal, Uttam K; Mukhopadhyay, Subhasis; Bothra, Asim K

    2015-01-01

    A comprehensive in silico analysis of 71 species representing the different taxonomic classes and physiological genre of the domain Archaea was performed. These organisms differed in their physiological attributes, particularly oxygen tolerance and energy metabolism. We explored the diversity and similarity in the codon usage pattern in the genes and genomes of these organisms, emphasizing on their core cellular pathways. Our thrust was to figure out whether there is any underlying similarity in the design of core pathways within these organisms. Analyses of codon utilization pattern, construction of hierarchical linear models of codon usage, expression pattern and codon pair preference pointed to the fact that, in the archaea there is a trend towards biased use of synonymous codons in the core cellular pathways and the Nc-plots appeared to display the physiological variations present within the different species. Our analyses revealed that aerobic species of archaea possessed a larger degree of freedom in regulating expression levels than could be accounted for by codon usage bias alone. This feature might be a consequence of their enhanced metabolic activities as a result of their adaptation to the relatively O2-rich environment. Species of archaea, which are related from the taxonomical viewpoint, were found to have striking similarities in their ORF structuring pattern. In the anaerobic species of archaea, codon bias was found to be a major determinant of gene expression. We have also detected a significant difference in the codon pair usage pattern between the whole genome and the genes related to vital cellular pathways, and it was not only species-specific but pathway specific too. This hints towards the structuring of ORFs with better decoding accuracy during translation. Finally, a codon-pathway interaction in shaping the codon design of pathways was observed where the transcription pathway exhibited a significantly different coding frequency signature.

  4. U.S. Department of Energy Reference Model Program RM2: Experimental Results

    Energy Technology Data Exchange (ETDEWEB)

    Hill, Craig [Univ. of Minnesota, Minneapolis, MN (United States). St. Anthony Falls Laboratory (UMN-SAFL); Neary, Vincent Sinclair [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Gunawan, Budi [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Guala, Michele [Univ. of Minnesota, Minneapolis, MN (United States). St. Anthony Falls Laboratory (UMN-SAFL); Sotiropoulos, Fotis [Univ. of Minnesota, Minneapolis, MN (United States). St. Anthony Falls Laboratory (UMN-SAFL)

    2014-08-01

    The Reference Model Project (RMP), sponsored by the U.S. Department of Energy’s (DOE) Wind and Water Power Technologies Program within the Office of Energy Efficiency & Renewable Energy (EERE), aims at expediting industry growth and efficiency by providing non-proprietary Reference Models (RM) of MHK technology designs as study objects for open-source research and development (Neary et al. 2014a,b). As part of this program, MHK turbine models were tested in a large open channel facility at the University of Minnesota’s St. Anthony Falls Laboratory (UMN - SAFL) . Reference Model 2 (RM2) is a 1:15 geometric scale dual - rotor cross flow vertical axis device with counter - rotating rotors, each with a rotor diameter dT = 0.43m and rotor height, hT = 0.323 m. RM2 is a river turbine designed for a site modeled after a reach in the lower Mississippi River near Baton Rouge, Louisiana (Barone et al. 2014) . Precise blade angular position and torque measurements were synchronized with three acoustic Doppler velocimeters (ADV) aligned with each rotor and the midpoint for RM2 . Flow conditions for each case were controlled such that depth, h = 1m, and volumetric flow rate, Qw = 2. 35m3s-1 , resulting in a hub height velocity of approximately Uhub = 1. 2 ms-1 and blade chord length Reynolds numbers of Rec = 6 .1x104. Vertical velocity profiles collected in the wake of each device from 1 to 10 rotor diameters are used to estimate the velocity recovery and turbulent characteristics in the wake, as well as the interaction of the counter-rotating rotor wakes. The development of this high resolution laboratory investigation provides a robust dataset that enables assessing computational fluid dynamics (CFD) models and their ability to accurately simulate turbulent inflow environments, device performance metrics, and to reproduce wake velocity deficit, recovery and higher order

  5. Vascular patterns in nodules of intraductal papillary mucinous neoplasms depicted under contrast-enhanced ultrasonography are helpful for evaluating malignant potential

    International Nuclear Information System (INIS)

    Kurihara, Naoko; Kawamoto, Hirofumi; Kobayashi, Yoshiyuki; Okamoto, Yuko; Yamamoto, Naoki; Tsutsumi, Koichiro; Fujii, Masakuni; Kato, Hironari; Yamamoto, Kazuhide

    2012-01-01

    Objectives: The purpose of this study is to evaluate the feasibility of contrast-enhanced ultrasonography (CE-US) to differentiate between benign and malignant intraductal papillary mucinous neoplasms (IPMN). Patients and methods: Contrast-enhanced ultrasonography with a contrast agent was performed on 22 consecutive patients with IPMN suspected of being malignant. This revealed 10 carcinomas, 1 borderline lesion and 11 adenomas. All patients underwent surgery, and the histological diagnosis was confirmed by examination of resected specimens. CE-US was performed using a contrast agent. The detection rates of mural nodules were compared between CE-US and contrast-enhanced computed tomography (CE-CT), and the imaging of mural nodules depicted under CE-US was analyzed. Results: Seventeen of 22 resected specimens (77.3%) had mural nodules. There was no significant difference in the detection rate between CE-US (n = 15; 88.2%) and CE-CT (n = 12; 70.6%). In 12 (80.0%) of these patients, CE-US revealed small vessels in the mural nodule. The spotty or linear-shaped pattern was detected in 4 patients and the branch-shaped pattern in 8. The branch-shaped pattern lesion was associated with carcinoma. These mural nodules were 10 mm or more in height. In the perfusion image phase, cystic walls and mural nodules were also enhanced in all cases. Conclusion: The vessel shapes of the mural nodules depicted under CE-US were associated with size and pathological findings. These results suggested that CE-US with a contrast agent is a powerful modality with which to evaluate the malignant potential of IPMN.

  6. A two-step convolutional neural network based computer-aided detection scheme for automatically segmenting adipose tissue volume depicting on CT images.

    Science.gov (United States)

    Wang, Yunzhi; Qiu, Yuchen; Thai, Theresa; Moore, Kathleen; Liu, Hong; Zheng, Bin

    2017-06-01

    Accurately assessment of adipose tissue volume inside a human body plays an important role in predicting disease or cancer risk, diagnosis and prognosis. In order to overcome limitation of using only one subjectively selected CT image slice to estimate size of fat areas, this study aims to develop and test a computer-aided detection (CAD) scheme based on deep learning technique to automatically segment subcutaneous fat areas (SFA) and visceral fat areas (VFA) depicting on volumetric CT images. A retrospectively collected CT image dataset was divided into two independent training and testing groups. The proposed CAD framework consisted of two steps with two convolution neural networks (CNNs) namely, Selection-CNN and Segmentation-CNN. The first CNN was trained using 2,240 CT slices to select abdominal CT slices depicting SFA and VFA. The second CNN was trained with 84,000pixel patches and applied to the selected CT slices to identify fat-related pixels and assign them into SFA and VFA classes. Comparing to the manual CT slice selection and fat pixel segmentation results, the accuracy of CT slice selection using the Selection-CNN yielded 95.8%, while the accuracy of fat pixel segmentation using the Segmentation-CNN was 96.8%. This study demonstrated the feasibility of applying a new deep learning based CAD scheme to automatically recognize abdominal section of human body from CT scans and segment SFA and VFA from volumetric CT data with high accuracy or agreement with the manual segmentation results. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Light Penetration in Seawater Polluted by Dispersed Oil: Results of Radiative Transfer Modelling

    Science.gov (United States)

    Haule, K.; Darecki, M.; Toczek, H.

    2015-11-01

    The downwelling light in seawater is shaped by natural seawater constituents as well as by some external substances which can occur locally and temporally. In this study we focused on dispersed oil droplets which can be found in seawater after an oil spill or in the consequence of intensive shipping, oil extraction and transportation. We applied our modified radiative transfer model based on Monte Carlo code to evaluate the magnitude of potential influence of dispersed oil droplets on the downwelling irradiance and the depth of the euphotic zone. Our model was validated on the basis of in situ measurements for natural (unpolluted) seawater in the Southern Baltic Sea, resulting in less than 5% uncertainty. The optical properties of dispersed Petrobaltic crude oil were calculated on the basis of Mie theory and involved into radiative transfer model. We found that the changes in downwelling light caused by dispersed oil depend on several factors such as oil droplet concentration, size distribution, and the penetration depth (i.e. vertical range of oil droplets occurrence below sea surface). Petrobaltic oil droplets of submicron sizes and penetration depth of 5 m showed a potentially detectable reduction in the depth of the euphotic zone of 5.5% at the concentration of only 10 ppb. Micrometer-sized droplets needed 10 times higher concentration to give a similar effect. Our radiative transfer model provided data to analyse and discuss the influence of each factor separately. This study contributes to the understanding of the change in visible light penetration in seawater affected by dispersed oil.

  8. Dynamics of dual prism adaptation: relating novel experimental results to a minimalistic neural model.

    Directory of Open Access Journals (Sweden)

    Orlando Arévalo

    Full Text Available In everyday life, humans interact with a dynamic environment often requiring rapid adaptation of visual perception and motor control. In particular, new visuo-motor mappings must be learned while old skills have to be kept, such that after adaptation, subjects may be able to quickly change between two different modes of generating movements ('dual-adaptation'. A fundamental question is how the adaptation schedule determines the acquisition speed of new skills. Given a fixed number of movements in two different environments, will dual-adaptation be faster if switches ('phase changes' between the environments occur more frequently? We investigated the dynamics of dual-adaptation under different training schedules in a virtual pointing experiment. Surprisingly, we found that acquisition speed of dual visuo-motor mappings in a pointing task is largely independent of the number of phase changes. Next, we studied the neuronal mechanisms underlying this result and other key phenomena of dual-adaptation by relating model simulations to experimental data. We propose a simple and yet biologically plausible neural model consisting of a spatial mapping from an input layer to a pointing angle which is subjected to a global gain modulation. Adaptation is performed by reinforcement learning on the model parameters. Despite its simplicity, the model provides a unifying account for a broad range of experimental data: It quantitatively reproduced the learning rates in dual-adaptation experiments for both direct effect, i.e. adaptation to prisms, and aftereffect, i.e. behavior after removal of prisms, and their independence on the number of phase changes. Several other phenomena, e.g. initial pointing errors that are far smaller than the induced optical shift, were also captured. Moreover, the underlying mechanisms, a local adaptation of a spatial mapping and a global adaptation of a gain factor, explained asymmetric spatial transfer and generalization of prism

  9. Cladding oxidation during air ingress. Part II: Synthesis of modelling results

    International Nuclear Information System (INIS)

    Beuzet, E.; Haurais, F.; Bals, C.; Coindreau, O.; Fernandez-Moguel, L.; Vasiliev, A.; Park, S.

    2016-01-01

    Highlights: • A state-of-the-art for air oxidation modelling in the frame of severe accident is done. • Air oxidation models from main severe accident codes are detailed. • Simulations from main severe accident codes are compared against experimental results. • Perspectives in terms of need for further model development and experiments are given. - Abstract: Air ingress is a potential risk in some low probable situations of severe accidents in a nuclear power plant. Air is a highly oxidizing atmosphere that can lead to an enhanced Zr-based cladding oxidation and core degradation affecting the release of fission products. This is particularly true speaking about ruthenium release, due to its high radiotoxicity and its ability to form highly volatile oxides in a significant manner in presence of air. The oxygen affinity is decreasing from the Zircaloy cladding, fuel and ruthenium inclusions. It is consequently of great need to understand the phenomena governing cladding oxidation by air as a prerequisite for the source term issues in such scenarios. In the past years, many works have been done on cladding oxidation by air under severe accident conditions. This paper with in addition the paper “Cladding oxidation during air ingress – Part I: Synthesis of experimental results” of this journal issue aim at assessing the state of the art on this phenomenon. In this paper, the modelling of air ingress phenomena in the main severe accident codes (ASTEC, ATHLET-CD, MAAP, MELCOR, RELAP/SCDAPSIM, SOCRAT) is described in details, as well as the validation against the integral experiments QUENCH-10, QUENCH-16 and PARAMETER-SF4. A full review of cladding oxidation by air is thus established.

  10. Hawaii Solar Integration Study: Solar Modeling Developments and Study Results; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Orwig, K.; Corbus, D.; Piwko, R.; Schuerger, M.; Matsuura, M.; Roose, L.

    2012-12-01

    The Hawaii Solar Integration Study (HSIS) is a follow-up to the Oahu Wind Integration and Transmission Study completed in 2010. HSIS focuses on the impacts of higher penetrations of solar energy on the electrical grid and on other generation. HSIS goes beyond the island of Oahu and investigates Maui as well. The study examines reserve strategies, impacts on thermal unit commitment and dispatch, utilization of energy storage, renewable energy curtailment, and other aspects of grid reliability and operation. For the study, high-frequency (2-second) solar power profiles were generated using a new combined Numerical Weather Prediction model/ stochastic-kinematic cloud model approach, which represents the 'sharp-edge' effects of clouds passing over solar facilities. As part of the validation process, the solar data was evaluated using a variety of analysis techniques including wavelets, power spectral densities, ramp distributions, extreme values, and cross correlations. This paper provides an overview of the study objectives, results of the solar profile validation, and study results.

  11. Modeling and Results for Creating Oblique Fields in a Magnetic Flux Leakage Survey Tool

    Science.gov (United States)

    Simek, James C.

    2010-02-01

    Integrity management programs designed to maintain safe pipeline systems quite often will use survey results from In line inspection (ILI) tools in addition to data from other sources. Commonly referred to a "smart pigs," one of the most widely used types are those based upon the magnetic flux leakage technique, typically used to detect and quantify metal loss zones. The majority of pipelines surveyed to date have used tools with the magnetic field direction axially aligned with the length of the pipeline. In order to enable detection and quantification of extremely narrow metal loss features or certain types of weld zone anomalies, tools employing magnetic circuits directing the magnetic fields around the pipe circumference have been designed and are use in segments where these feature categories are a primary concern. Modeling and laboratory test data of metal loss features will be used to demonstrate the response of extremely narrow metal loss zones as the features are rotated relative to the induced field direction. Based upon these results, the basis for developing a magnetizer capable of creating fields oblique to either pipeline axis will be presented along with the magnetic field profile models of several configurations.

  12. Energy and exergy analysis of an indirect solar cabinet dryer based on mathematical modeling results

    International Nuclear Information System (INIS)

    Sami, Samaneh; Etesami, Nasrin; Rahimi, Amir

    2011-01-01

    In the present study, using a previously developed dynamic mathematical model for performance analysis of an indirect cabinet solar dryer , a microscopic energy and exergy analysis for an indirect solar cabinet dryer is carried out. To this end, appropriate energy and exergy models are developed and using the predicted values for temperature and enthalpy of gas stream and the temperature, enthalpy and moisture content of the drying solid, the energy and exergy efficiencies are estimated. The validity of the model for predicting variations in gas and solid characteristics along the time and the length of the solar collector and/or dryer length was examined against some existing experimental data. The results show that in spite of high energy efficiency, the indirect solar cabinet dryer has relatively low exergy efficiency. Results show that the maximum exergy losses are in midday. Also the minimums of total exergy efficiency are 32.3% and 47.2% on the first and second days, respectively. Furthermore, the effect of some operating parameters, including length of the collector, its surface, and air flow rate was investigated on the exergy destruction and efficiency. -- Highlights: → In the literature, there are few studies on the energy and exergy analysis of solar cabinet dryers. → In the present study a microscopic energy and exergy analysis for an indirect solar cabinet dryer is carried out. → Effect of operating parameters, including collector length, and air flow rate was investigated on the exergy destruction and efficiency. → For collector section, the maximum values for outlet air temperature, outlet exergy and energy are 69 o C, 2.5 kW and 1.12 kW, respectively. → Increasing the air flow rate decreases the exergy efficiency of solar collector.

  13. Ozone precursor levels and responses to emissions reductions: Analysis of regional oxidant model results

    Science.gov (United States)

    Milford, Jana B.; Gao, Dongfen; Zafirakou, Antigoni; Pierce, Thomas E.

    An analysis of results from the Regional Oxidant Modeling for Northeast Transport (ROMNET) study ( U.S. EPA, 1991, EPA-450/4-91-002a) has investigated the chemical conditions under which air quality was predicted to improve with reductions in ROG and/or NO ξ emissions, or with changes in the composition of ROG emissions. The ROMNET simulations used emissions projected to the year 2005, with meteorological conditions from July 1988. Predicted concentrations of PAN, HNO 3, H 2O 2 and HCHO are shown along with O 3 for the 2005 base case, allowing limited comparisons to be made with field observations and results from other modeling studies. Predicted secondary pollutant concentrations indicate an unusual degree of photochemical activity over much of the model domain, directionally consistent with the extreme nature of the July 1988 episode. Reducing NO ξ emissions was predicted to reduce O 3 in grid cells in which reactive nitrogen (NO y) concentrations were below about 25 ppb, but to be counterproductive for some cells with higher NO y. The New York City area where NO ξ control was predicted to be counterproductive was characterized by very high NO ξ to NO y ratios. Ozone was relatively insensitive to ROG controls in grid cells with NO y concentrations below 5-10 ppb. Comparison of unweighted ROG concentrations with concentrations weighted by HO rate constants (i.e. reactivity) showed that the latter varied less across locations. Predicted spatial gradients of NO y were generally sharper than those of reactivity-weighted ROG, supporting a dominant role for variations in NO y in controlling the sensitivity of ozone to its precursors. Reductions in reactivity-weighted ROG achieved with composition changes were similar to reductions achieved with ROG emissions cuts, explaining the similar response of ozone to these two control strategies.

  14. Predictive models of tree-growth: preliminary results in the French Alps

    Science.gov (United States)

    Tessier, Lucien; Keller, Thierry; Guiot, Joel; Edouard, Jean-Louis; Guibal, Frédéric

    The analysis of tree-ring-climate relationships provides models (response functions) of tree-growth calibrated on the inter-annual variability of climate. Output of GCMs can be used as inputs of these models in order to evaluate the change in radial growth induced by climatic change. A spatiotemporal approach applied to a large data set of ring-width chronologies and meteorological data allows the response of trees to be evaluated for different populations of various species in numerous habitats. Such a study was carried out, firstly on ten populations in south-eastern France, then on populations at high-altitude sites. The species involved were Larix decidua, Mill., Pinus sylvestris, L., Abies alba, Mill., and Picea abies Karst. The calibration of tree ring to climate relationships was based on the monthly values of precipitation and temperature provided by meteorological stations more or less distant from the tree sites. Outputs of GCMs were obtained from the ARPEGE model of Météo-France with a simulation on a large grid (2°79 in latitude and 3° in longitude) for the hypothesis of a CO2 doubling. Results show that climatic change can induce either an increase or a decrease in the mean radial growth. For most of the tree-populations, no significant change was apparent. The results suffer from insufficient data related to the spatial representation of climate (i.e. stations that are too far from the tree populations, only two grid points available from the GCMs, etc.).

  15. Compound analysis of gallstones using dual energy computed tomography-Results in a phantom model

    International Nuclear Information System (INIS)

    Bauer, Ralf W.; Schulz, Julian R.; Zedler, Barbara; Graf, Thomas G.; Vogl, Thomas J.

    2010-01-01

    Purpose: The potential of dual energy computed tomography (DECT) for the analysis of gallstone compounds was investigated. The main goal was to find parameters, that can reliably define high percentage (>70%) cholesterol stones without calcium components. Materials and methods: 35 gallstones were analyzed with DECT using a phantom model. Stone samples were put into specimen containers filled with formalin. Containers were put into a water-filled cylindrical acrylic glass phantom. DECT scans were performed using a tube voltage/current of 140 kV/83 mAs (tube A) and 80 kV/340 mAs (tube B). ROI-measurements to determine CT attenuation of each sector of the stones that had different appearance on the CT images were performed. Finally, semi-quantitative infrared spectroscopy (FTIR) of these sectors was performed for chemical analysis. Results: ROI-measurements were performed in 45 different sectors in 35 gallstones. Sectors containing >70% of cholesterol and no calcium component (n = 20) on FTIR could be identified with 95% sensitivity and 100% specificity on DECT. These sectors showed typical attenuation of -8 ± 4 HU at 80 kV and +22 ± 3 HU at 140 kV. Even the presence of a small calcium component (<10%) hindered the reliable identification of cholesterol components as such. Conclusion: Dual energy CT allows for reliable identification of gallstones containing a high percentage of cholesterol and no calcium component in this pre-clinical phantom model. Results from in vivo or anthropomorphic phantom trials will have to confirm these results. This may enable the identification of patients eligible for non-surgical treatment options in the future.

  16. Effects of stream topology on ecological community results from neutral models

    Science.gov (United States)

    While neutral theory and models have stimulated considerable literature, less well investigated is the effect of topology on neutral metacommunity model simulations. We implemented a neutral metacommunity model using two different stream network topologies, a widely branched netw...

  17. Blood Pool Segmentation Results in Superior Virtual Cardiac Models than Myocardial Segmentation for 3D Printing.

    Science.gov (United States)

    Farooqi, Kanwal M; Lengua, Carlos Gonzalez; Weinberg, Alan D; Nielsen, James C; Sanz, Javier

    2016-08-01

    The method of cardiac magnetic resonance (CMR) three-dimensional (3D) image acquisition and post-processing which should be used to create optimal virtual models for 3D printing has not been studied systematically. Patients (n = 19) who had undergone CMR including both 3D balanced steady-state free precession (bSSFP) imaging and contrast-enhanced magnetic resonance angiography (MRA) were retrospectively identified. Post-processing for the creation of virtual 3D models involved using both myocardial (MS) and blood pool (BP) segmentation, resulting in four groups: Group 1-bSSFP/MS, Group 2-bSSFP/BP, Group 3-MRA/MS and Group 4-MRA/BP. The models created were assessed by two raters for overall quality (1-poor; 2-good; 3-excellent) and ability to identify predefined vessels (1-5: superior vena cava, inferior vena cava, main pulmonary artery, ascending aorta and at least one pulmonary vein). A total of 76 virtual models were created from 19 patient CMR datasets. The mean overall quality scores for Raters 1/2 were 1.63 ± 0.50/1.26 ± 0.45 for Group 1, 2.12 ± 0.50/2.26 ± 0.73 for Group 2, 1.74 ± 0.56/1.53 ± 0.61 for Group 3 and 2.26 ± 0.65/2.68 ± 0.48 for Group 4. The numbers of identified vessels for Raters 1/2 were 4.11 ± 1.32/4.05 ± 1.31 for Group 1, 4.90 ± 0.46/4.95 ± 0.23 for Group 2, 4.32 ± 1.00/4.47 ± 0.84 for Group 3 and 4.74 ± 0.56/4.63 ± 0.49 for Group 4. Models created using BP segmentation (Groups 2 and 4) received significantly higher ratings than those created using MS for both overall quality and number of vessels visualized (p 3D printers with good quality and accurate representation of the virtual 3D models. We recommend using BP segmentation with either MRA or bSSFP source datasets to create virtual 3D models for 3D printing. Desktop 3D printers can offer good quality printed models with accurate representation of anatomic detail.

  18. Uncertainty into statistical landslide susceptibility models resulting from terrain mapping units and landslide input data

    Science.gov (United States)

    Zêzere, José Luis; Pereira, Susana; Melo, Raquel; Oliveira, Sérgio; Garcia, Ricardo

    2017-04-01

    There are multiple sources of uncertainty within statistically-based landslide susceptibility assessment that needs to be accounted and monitored. In this work we evaluate and discuss differences observed on landslide susceptibility maps resulting from the selection of the terrain mapping unit and the selection of the feature type to represent landslides (polygon vs point). The work is performed in the Silveira Basin (18.2 square kilometres) located north of Lisbon, Portugal, using a unique database of geo-environmental landslide predisposing factors and an inventory of 81 shallow translational slides. The Logistic Regression is the statistical method selected to combine the predictive factors with the dependent variable. Four landslide susceptibility models were computed using the complete landslide inventory and considering the total landslide area over four different terrain mapping units: Slope Terrain Units (STU), Geo-Hydrological Terrain Units (GHTU), Census Terrain Units (CTU) and Grid Cell Terrain Units (GCTU). Four additional landslide susceptibility models were made over the same four terrain mapping units using a landslide training group (50% of the inventory randomly selected). These models were independently validated with the other 50% of the landslide inventory (landslide test group). Lastly, two additional landslide susceptibility models were computed over GCTU, one using the landslide training group represented as point features corresponding to the centroid of landslide, and other using the centroid of landslide rupture zone. In total, 10 landslide susceptibility maps were constructed and classified in 10 classes of equal number of terrain units to allow comparison. The evaluation of the prediction skills of susceptibility models was made using ROC metrics and Success and Prediction rate curves. Lastly, the landslide susceptibility maps computed over GCTU were compared using the Kappa statistics. With this work we conclude that large differences

  19. Uranium dioxide-sodium interactions. Development of a theoretical model. Fitting of this model to the experimental results

    International Nuclear Information System (INIS)

    Syrmalenios, Panayotis

    1973-01-01

    This research thesis addresses the issue of safety of fast neutron reactors, and more particularly is a contribution of the study of mechanisms of interaction between molten fuel and sodium. It aims at developing tools of prediction of consequences of three main types of accidents: local fusion of a fuel rod and contact of the fuel with the surrounding sodium, failure of an assembly due to the fusion of several rods and fuel-coolant interaction within the assembly, and fuel-coolant interaction at the level of the reactor core. The author first proposes a bibliographical analysis of experimental and theoretical studies related to this issue of interaction between a hot body and a cold liquid, and of its consequences. Then, he introduces a mathematical model and its resolution method, and reports the use of the associated code (Corfou) for the interpretation of experimental results: expulsion of cold sodium column by expansion of an overheated sodium mass, fusion of a rod by Joule effect, interaction between UO 2 molten by high frequency with liquid sodium. Finally, the author discusses a comparison between the Corfou code and other models which are being currently developed [fr

  20. Confirmation of ACRU model results for applications in land use and climate change studies

    Directory of Open Access Journals (Sweden)

    G. P. W. Jewitt

    2010-12-01

    Full Text Available The hydrological responses of a catchment are sensitive to, and strongly coupled to, land use and climate, and changes thereof. The hydrological responses to the impacts of changing land use and climate will be the result of complex interactions, where the change in one may moderate or exacerbate the effects of the other. Further difficulties in assessing these interactions are that dominant drivers of the hydrological system may vary at different spatial and temporal scales. To assess these interactions, a process-based hydrological model, sensitive to land use and climate, and changes thereof, needs to be used. For this purpose the daily time step ACRU model was selected. However, to be able to use a hydrological model such as ACRU with confidence its representation of reality must be confirmed by comparing simulated output against observations across a range of climatic conditions. Comparison of simulated against observed streamflow was undertaken in three climatically diverse South African catchments, ranging from the semi-arid, sub-tropical Luvuvhu catchment, to the winter rainfall Upper Breede catchment and the sub-humid Mgeni catchment. Not only do the climates of the catchments differ, but their primary land uses also vary. In the upper areas of the Mgeni catchment commercial plantation forestry is dominant, while in the middle reaches there are significant areas of commercial plantation sugarcane and urban areas, while the lower reaches are dominated by urban areas. The Luvuvhu catchment has a large proportion of subsistence agriculture and informal residential areas. In the Upper Breede catchment in the Western Cape, commercial orchards and vineyards are the primary land uses. Overall the ACRU model was able to represent the high, low and total flows, with satisfactory Nash-Sutcliffe efficiency indexes obtained for the selected catchments. The study concluded that the ACRU model can be used with confidence to simulate the streamflows

  1. Confirmation of ACRU model results for applications in land use and climate change studies

    Science.gov (United States)

    Warburton, M. L.; Schulze, R. E.; Jewitt, G. P. W.

    2010-12-01

    The hydrological responses of a catchment are sensitive to, and strongly coupled to, land use and climate, and changes thereof. The hydrological responses to the impacts of changing land use and climate will be the result of complex interactions, where the change in one may moderate or exacerbate the effects of the other. Further difficulties in assessing these interactions are that dominant drivers of the hydrological system may vary at different spatial and temporal scales. To assess these interactions, a process-based hydrological model, sensitive to land use and climate, and changes thereof, needs to be used. For this purpose the daily time step ACRU model was selected. However, to be able to use a hydrological model such as ACRU with confidence its representation of reality must be confirmed by comparing simulated output against observations across a range of climatic conditions. Comparison of simulated against observed streamflow was undertaken in three climatically diverse South African catchments, ranging from the semi-arid, sub-tropical Luvuvhu catchment, to the winter rainfall Upper Breede catchment and the sub-humid Mgeni catchment. Not only do the climates of the catchments differ, but their primary land uses also vary. In the upper areas of the Mgeni catchment commercial plantation forestry is dominant, while in the middle reaches there are significant areas of commercial plantation sugarcane and urban areas, while the lower reaches are dominated by urban areas. The Luvuvhu catchment has a large proportion of subsistence agriculture and informal residential areas. In the Upper Breede catchment in the Western Cape, commercial orchards and vineyards are the primary land uses. Overall the ACRU model was able to represent the high, low and total flows, with satisfactory Nash-Sutcliffe efficiency indexes obtained for the selected catchments. The study concluded that the ACRU model can be used with confidence to simulate the streamflows of the three selected

  2. The thermochemical, two-phase dynamics of subduction zones: results from new, fully coupled models

    Science.gov (United States)

    Rees Jones, D. W.; Katz, R. F.; May, D.; Tian, M.; Rudge, J. F.

    2017-12-01

    Subduction zones are responsible for most of Earth's subaerial volcanism. However, previous geodynamic modelling of subduction zones has largely neglected magmatism. We previously showed that magmatism has a significant thermal impact, by advecting sensible heat into the lithosphere beneath arc volcanos [1]. Inclusion of this effect helps reconcile subduction zone models with petrological and heat flow observations. Many important questions remain, including how magma-mantle dynamics of subduction zones affects the position of arc volcanos and the character of their lavas. In this presentation, we employ a fully coupled, thermochemical, two-phase flow theory to investigate the dynamics of subduction zones. We present the first results from our new software (SubFUSc), which solves the coupled equations governing conservation of mass, momentum, energy and chemical species. The presence and migration of partial melts affect permeability and mantle viscosity (both directly and through their thermal impact); these, in turn, feed back on the magma-mantle flow. Thus our fully coupled modelling improves upon previous two-phase models that decoupled the governing equations and fixed the thermal structure [2]. To capture phase change, we use a novel, simplified model of the mantle melting in the presence of volatile species. As in the natural system, volatiles are associated with low-degree melting at temperatures beneath the anhydrous solidus; dehydration reactions in the slab supply volatiles into the wedge, triggering silicic melting. We simulate the migration of melts under buoyancy forces and dynamic pressure gradients. We thereby demonstrate the dynamical controls on the pattern of subduction-zone volcanism (particularly its location, magnitude, and chemical composition). We build on our previous study of the thermal consequences of magma genesis and segregation. We address the question of what controls the location of arc volcanoes themselves [3]. [1] Rees Jones, D. W

  3. Investigation of sonar transponders for offshore wind farms: modeling approach, experimental setup, and results.

    Science.gov (United States)

    Fricke, Moritz B; Rolfes, Raimund

    2013-11-01

    The installation of offshore wind farms in the German Exclusive Economic Zone requires the deployment of sonar transponders to prevent collisions with submarines. The general requirements for these systems have been previously worked out by the Research Department for Underwater Acoustics and Marine Geophysics of the Bundeswehr. In this article, the major results of the research project "Investigation of Sonar Transponders for Offshore Wind Farms" are presented. For theoretical investigations a hybrid approach was implemented using the boundary element method to calculate the source directivity and a three-dimensional ray-tracing algorithm to estimate the transmission loss. The angle-dependence of the sound field as well as the weather-dependence of the transmission loss are compared to experimental results gathered at the offshore wind farm alpha ventus, located 45 km north of the island Borkum. While theoretical and experimental results are in general agreement, the implemented model slightly underestimates scattering at the rough sea surface. It is found that the source level of 200 dB re 1 μPa at 1 m is adequate to satisfy the detectability of the warning sequence at distances up to 2 NM (≈3.7 km) within a horizontal sector of ±60° if realistic assumptions about signal-processing and noise are made. An arrangement to enlarge the angular coverage is discussed.

  4. Updated comparison of groundwater flow model results and isotopic data in the Leon Valley, Mexico

    Science.gov (United States)

    Hernandez-Garcia, G. D.

    2015-12-01

    Northwest of Mexico City, the study area is located in the State of Guanajuato. Leon Valley has covered with groundwater its demand of water, estimated in 20.6 cubic meters per second. The constant increase of population and economic activities in the region, mainly in cities and automobile factories, has also a constant growth in water needs. Related extraction rate has produced an average decrease of approximately 1.0 m per year over the past two decades. This suggests that the present management of the groundwater should be checked. Management of groundwater in the study area involves the possibility of producing environmental impacts by extraction. This vital resource under stress becomes necessary studying its hydrogeological functioning to achieve scientific management of groundwater in the Valley. This research was based on the analysis and integration of existing information and the field generated by the authors. On the base of updated concepts like the geological structure of the area, the hydraulic parameters and the composition of deuterium-delta and delta-oxygen -18, this research has new results. This information has been fully analyzed by applying a groundwater flow model with particle tracking: the result has also a similar result in terms of travel time and paths derived from isotopic data.

  5. Effects of naloxone distribution to likely bystanders: Results of an agent-based model.

    Science.gov (United States)

    Keane, Christopher; Egan, James E; Hawk, Mary

    2018-03-07

    Opioid overdose deaths in the US rose dramatically in the past 16 years, creating an urgent national health crisis with no signs of immediate relief. In 2017, the President of the US officially declared the opioid epidemic to be a national emergency and called for additional resources to respond to the crisis. Distributing naloxone to community laypersons and people at high risk for opioid overdose can prevent overdose death, but optimal distribution methods have not yet been pinpointed. We conducted a sequential exploratory mixed methods design using qualitative data to inform an agent-based model to improve understanding of effective community-based naloxone distribution to laypersons to reverse opioid overdose. The individuals in the model were endowed with cognitive and behavioral variables and accessed naloxone via community sites such as pharmacies, hospitals, and urgent-care centers. We compared overdose deaths over a simulated 6-month period while varying the number of distribution sites (0, 1, and 10) and number of kits given to individuals per visit (1 versus 10). Specifically, we ran thirty simulations for each of thirteen distribution models and report average overdose deaths for each. The baseline comparator was no naloxone distribution. Our simulations explored the effects of distribution through syringe exchange sites with and without secondary distribution, which refers to distribution of naloxone kits by laypersons within their social networks and enables ten additional laypersons to administer naloxone to reverse opioid overdose. Our baseline model with no naloxone distribution predicted there would be 167.9 deaths in a six month period. A single distribution site, even with 10 kits picked up per visit, decreased overdose deaths by only 8.3% relative to baseline. However, adding secondary distribution through social networks to a single site resulted in 42.5% fewer overdose deaths relative to baseline. That is slightly higher than the 39

  6. A Neighborhood-Scale Green Infrastructure Retrofit: Experimental Results, Model Simulations, and Resident Perspectives

    Science.gov (United States)

    Jefferson, A.; Avellaneda, P. M.; Jarden, K. M.; Turner, V. K.; Grieser, J.

    2016-12-01

    Distributed green infrastructure approaches to stormwater management that can be retrofit into existing development are of growing interest, but questions remain about their effectiveness at the watershed-scale. In suburban northeastern Ohio, homeowners on a residential street with 55% impervious surface were given the opportunity for free rain barrels, rain gardens, and bioretention cells. Of 163 parcels, only 22 owners (13.5%) chose to participate, despite intense outreach efforts. After pre-treatment monitoring, 37 rain barrels, 7 rain gardens, and 16 street-side bioretention cells were installed in 2013-2014. Using a paired watershed approach, a reduction in up to 33% of peak flow and 40% of total runoff volume per storm was measured in the storm sewer. Using the monitoring data, a calibrated and validated SWMM model was built to explore the long-term effectiveness of the green infrastructure against a wider range of hydrological conditions. Model results confirm the effectiveness of green infrastructure in reducing surface runoff and increasing infiltration and evaporation. Based on 20 years of historical precipitation data, the model shows that the green infrastructure is capable of reducing flows by >40% at the 1, 2, and 5 year return period, suggesting some resilience to projected increases in precipitation intensity in a changing climate. Further, in this project, more benefit is derived from the street-side bioretention cells than from the rain barrels and gardens that treat rooftop runoff. Substantial hydrological gains were achieved despite low homeowner participation. Surveys indicate that many residents viewed stormwater as the city's problem and had negative perceptions of green infrastructure, despite slightly pro-environment values generally. Overall, this study demonstrates green infrastructure's hydrological effectiveness but raises challenging questions about overcoming social barriers retrofits at the neighborhood scale.

  7. Recent Progress in Understanding Natural-Hazards-Generated TEC Perturbations: Measurements and Modeling Results

    Science.gov (United States)

    Komjathy, A.; Yang, Y. M.; Meng, X.; Verkhoglyadova, O. P.; Mannucci, A. J.; Langley, R. B.

    2015-12-01

    Natural hazards, including earthquakes, volcanic eruptions, and tsunamis, have been significant threats to humans throughout recorded history. The Global Positioning System satellites have become primary sensors to measure signatures associated with such natural hazards. These signatures typically include GPS-derived seismic deformation measurements, co-seismic vertical displacements, and real-time GPS-derived ocean buoy positioning estimates. Another way to use GPS observables is to compute the ionospheric total electron content (TEC) to measure and monitor post-seismic ionospheric disturbances caused by earthquakes, volcanic eruptions, and tsunamis. Research at the University of New Brunswick (UNB) laid the foundations to model the three-dimensional ionosphere at NASA's Jet Propulsion Laboratory by ingesting ground- and space-based GPS measurements into the state-of-the-art Global Assimilative Ionosphere Modeling (GAIM) software. As an outcome of the UNB and NASA research, new and innovative GPS applications have been invented including the use of ionospheric measurements to detect tiny fluctuations in the GPS signals between the spacecraft and GPS receivers caused by natural hazards occurring on or near the Earth's surface.We will show examples for early detection of natural hazards generated ionospheric signatures using ground-based and space-borne GPS receivers. We will also discuss recent results from the U.S. Real-time Earthquake Analysis for Disaster Mitigation Network (READI) exercises utilizing our algorithms. By studying the propagation properties of ionospheric perturbations generated by natural hazards along with applying sophisticated first-principles physics-based modeling, we are on track to develop new technologies that can potentially save human lives and minimize property damage. It is also expected that ionospheric monitoring of TEC perturbations might become an integral part of existing natural hazards warning systems.

  8. Comparison of experimental data with results of some drying models for regularly shaped products

    Energy Technology Data Exchange (ETDEWEB)

    Kaya, Ahmet [Aksaray University, Department of Mechanical Engineering, Aksaray (Turkey); Aydin, Orhan [Karadeniz Technical University, Department of Mechanical Engineering, Trabzon (Turkey); Dincer, Ibrahim [University of Ontario Institute of Technology, Faculty of Engineering and Applied Science, Oshawa, ON (Canada)

    2010-05-15

    This paper presents an experimental and theoretical investigation of drying of moist slab, cylinder and spherical products to study dimensionless moisture content distributions and their comparisons. Experimental study includes the measurement of the moisture content distributions of slab and cylindrical carrot, slab and cylindrical pumpkin and spherical blueberry during drying at various temperatures (e.g., 30, 40, 50 and 60 C) at specific constant velocity (U = 1 m/s) and the relative humidity {phi}=30%. In theoretical analysis, two moisture transfer models are used to determine drying process parameters (e.g., drying coefficient and lag factor) and moisture transfer parameters (e.g., moisture diffusivity and moisture transfer coefficient), and to calculate the dimensionless moisture content distributions. The calculated results are then compared with the experimental moisture data. A considerably high agreement is obtained between the calculations and experimental measurements for the cases considered. The effective diffusivity values were evaluated between 0.741 x 10{sup -5} and 5.981 x 10{sup -5} m{sup 2}/h for slab products, 0.818 x 10{sup -5} and 6.287 x 10{sup -5} m{sup 2}/h for cylindrical products and 1.213 x 10{sup -7} and 7.589 x 10{sup -7} m{sup 2}/h spherical products using the model-I and 0.316 x 10{sup -5}-5.072 x 10{sup -5} m{sup 2}/h for slab products, 0.580 x 10{sup -5}-9.587 x 10{sup -5} m{sup 2}/h for cylindrical products and 1.408 x 10{sup -7}-13.913 x 10{sup -7} m{sup 2}/h spherical products using the model-II. (orig.)

  9. Photospheric Current Spikes And Their Possible Association With Flares - Results from an HMI Data Driven Model

    Science.gov (United States)

    Goodman, M. L.; Kwan, C.; Ayhan, B.; Eric, S. L.

    2016-12-01

    A data driven, near photospheric magnetohydrodynamic model predicts spikes in the horizontal current density, and associated resistive heating rate. The spikes appear as increases by orders of magnitude above background values in neutral line regions (NLRs) of active regions (ARs). The largest spikes typically occur a few hours to a few days prior to M or X flares. The spikes correspond to large vertical derivatives of the horizontal magnetic field. The model takes as input the photospheric magnetic field observed by the Helioseismic & Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO) satellite. This 2.5 D field is used to determine an analytic expression for a 3 D magnetic field, from which the current density, vector potential, and electric field are computed in every AR pixel for 14 ARs. The field is not assumed to be force-free. The spurious 6, 12, and 24 hour Doppler periods due to SDO orbital motion are filtered out of the time series of the HMI magnetic field for each pixel. The subset of spikes analyzed at the pixel level are found to occur on HMI and granulation scales of 1 arcsec and 12 minutes. Spikes are found in ARs with and without M or X flares, and outside as well as inside NLRs, but the largest spikes are localized in the NLRs of ARs with M or X flares. The energy to drive the heating associated with the largest current spikes comes from bulk flow kinetic energy, not the electromagnetic field, and the current density is highly non-force free. The results suggest that, in combination with the model, HMI is revealing strong, convection driven, non-force free heating events on granulation scales, and it is plausible these events are correlated with subsequent M or X flares. More and longer time series need to be analyzed to determine if such a correlation exists.

  10. Estimating the lifetime cost of childhood obesity in Germany: Results of a Markov Model.

    Science.gov (United States)

    Sonntag, D; Ali, S; Lehnert, T; Konnopka, A; Riedel-Heller, S; König, H-H

    2015-12-01

    Child obesity is a growing public health concern. Excess weight in childhood is known to be associated with a high risk of obesity and obesity-related comorbidities in adulthood. This study quantifies lifetime excess costs of overweight and obese adults in Germany taking the history of obesity in childhood into account. A two-stage Markov cohort state transition model was developed. At stage 1, the distribution of body mass index (BMI) categories was tracked from childhood (ages 3-17) to adulthood (age 17 and up). Based on these results, it was distinguished whether adults had been normal in weight or overweight/obese as child. At stage 2, age-specific and lifetime costs from age 18 onwards were simulated in two further Markov cohort models, one for each of the two BMI groups. Model parameter values were obtained from the German Interview and Examination Survey for Children and Adolescents (KiGGS), the German Microcensus 2009 and published literature. When compared with normal weight adults, lifetime excess costs are higher among adults who had been overweight or obese at any point during childhood. For 18-year-old women (men), who have been overweight/obese during their childhood (ages 3-17), undiscounted lifetime excess costs are estimated at €19,479 (€14,524), with 60% (67%) occurring beyond age 60. Discounted (3%) lifetime excess costs are considerably lower, amounting to €4262 for men and €7028 for women. Because childhood obesity determines healthcare costs occurring in adulthood, interventions preventing the persistence of child obesity and obesity-related comorbidities during adulthood could have a substantial impact on reducing the burden of the obesity epidemic. © 2015 World Obesity.

  11. AN ANIMAL MODEL OF SCHIZOPHRENIA BASED ON CHRONIC LSD ADMINISTRATION: OLD IDEA, NEW RESULTS

    Science.gov (United States)

    Marona-Lewicka, Danuta; Nichols, Charles D.; Nichols, David E.

    2011-01-01

    Many people who take LSD experience a second temporal phase of LSD intoxication that is qualitatively different, and was described by Daniel Freedman as “clearly a paranoid state.” We have previously shown that the discriminative stimulus effects of LSD in rats also occur in two temporal phases, with initial effects mediated by activation of 5-HT2A receptors (LSD30), and the later temporal phase mediated by dopamine D2-like receptors (LSD90). Surprisingly, we have now found that non-competitive NMDA antagonists produced full substitution in LSD90 rats, but only in older animals, whereas in LSD30, or in younger animals, these drugs did not mimic LSD. Chronic administration of low doses of LSD (>3 months, 0.16 mg/kg every other day) induces a behavioral state characterized by hyperactivity and hyperirritability, increased locomotor activity, anhedonia, and impairment in social interaction that persists at the same magnitude for at least three months after cessation of LSD treatment. These behaviors, which closely resemble those associated with psychosis in humans, are not induced by withdrawal from LSD; rather, they are the result of neuroadaptive changes occurring in the brain during the chronic administration of LSD. These persistent behaviors are transiently reversed by haloperidol and olanzapine, but are insensitive to MDL-100907. Gene expression analysis data show that chronic LSD treatment produced significant changes in multiple neurotransmitter system-related genes, including those for serotonin and dopamine. Thus, we propose that chronic treatment of rats with low doses of LSD can serve as a new animal model of psychosis that may mimic the development and progression of schizophrenia, as well as model the established disease better than current acute drug administration models utilizing amphetamine or NMDA antagonists such as PCP. PMID:21352832

  12. Spreading of intolerance under economic stress: Results from a reputation-based model

    Science.gov (United States)

    Martinez-Vaquero, Luis A.; Cuesta, José A.

    2014-08-01

    When a population is engaged in successive prisoner's dilemmas, indirect reciprocity through reputation fosters cooperation through the emergence of moral and action rules. A simplified model has recently been proposed where individuals choose between helping others or not and are judged good or bad for it by the rest of the population. The reputation so acquired will condition future actions. In this model, eight strategies (referred to as "leading eight") enforce a high level of cooperation, generate high payoffs, and are therefore resistant to invasions by other strategies. Here we show that, by assigning each individual one of two labels that peers can distinguish (e.g., political ideas, religion, and skin color) and allowing moral and action rules to depend on the label, intolerant behaviors can emerge within minorities under sufficient economic stress. We analyze the sets of conditions where this can happen and also discuss the circumstances under which tolerance can be restored. Our results agree with empirical observations that correlate intolerance and economic stress and predict a correlation between the degree of tolerance of a population and its composition and ethical stance.

  13. Cost-Utility Analysis of Bariatric Surgery in Italy: Results of Decision-Analytic Modelling

    Directory of Open Access Journals (Sweden)

    Marcello Lucchese

    2017-06-01

    Full Text Available Objective: To evaluate the cost-effectiveness of bariatric surgery in Italy from a third-party payer perspective over a medium-term (10 years and a long-term (lifetime horizon. Methods: A state-transition Markov model was developed, in which patients may experience surgery, post-surgery complications, diabetes mellitus type 2, cardiovascular diseases or die. Transition probabilities, costs, and utilities were obtained from the Italian and international literature. Three types of surgeries were considered: gastric bypass, sleeve gastrectomy, and adjustable gastric banding. A base-case analysis was performed for the population, the characteristics of which were obtained from surgery candidates in Italy. Results: In the base-case analysis, over 10 years, bariatric surgery led to cost increment of EUR 2,661 and generated additional 1.1 quality-adjusted life years (QALYs. Over a lifetime, surgery led to savings of EUR 8,649, additional 0.5 life years and 3.2 QALYs. Bariatric surgery was cost-effective at 10 years with an incremental cost-effectiveness ratio of EUR 2,412/QALY and dominant over conservative management over a lifetime. Conclusion: In a comprehensive decision analytic model, a current mix of surgical methods for bariatric surgery was cost-effective at 10 years and cost-saving over the lifetime of the Italian patient cohort considered in this analysis.

  14. Demand for seasonal gas storage in northwest Europe until 2030. Simulation results with a dynamic model

    International Nuclear Information System (INIS)

    De Joode, J.; Oezdemir, Oe.

    2010-01-01

    The fact that depletion of indigenous gas production increases gas import dependency is widely known and accepted. However, there is considerable less attention for the implications of indigenous resource depletion for the provision of seasonal flexibility. The traditionally largest source of seasonal flexibility in Europe is indigenous gas production, mainly based in the Netherlands and the United Kingdom. With the depletion of indigenous sources the market increasingly needs to rely on other sources for seasonal flexibility, such as gas storage facilities. We investigate the future need for gas storage as a source for seasonal flexibility provision using a dynamic gas market model (GASTALE) in which different potential sources for seasonal flexibility - gas production, imports via pipeline, LNG imports and storage facilities - compete with each other in a market-based environment. The inclusion of seasonal flexibility properties in a gas market model allows a more complex analysis of seasonal flexibility issues than previously documented in literature. This is demonstrated in an analysis of the future demand for gas storage in northwestern Europe until 2030. Our results indicate that there is substantial need for additional gas storage facilities and thus supports current project proposals for new investment in gas storage facilities. (author)

  15. First results from the use of the relativistic and slim disc model SLIMULX in XSPEC

    Science.gov (United States)

    Caballero-Garcia, M. D.; Bursa, M.; Dovčiak, M.; Fabrika, S.; Castro-Tirado, A. J.; Karas, V.

    2017-07-01

    Ultra-Luminous X-ray sources (ULXs) are accreting black holes for which their X-ray properties have been seen to be different to the case of stellar-mass black hole binaries. For most of the cases their intrinsic energy spectra are well described by a cold accretion disc (thermal) plus a curved high-energy emission components. The mass of the black hole (BH) derived from the thermal disc component is usually in the range of 100-1000 solar masses, which have led to the idea that this might represent strong evidence of the Intermediate Mass Black Holes (IMBH), proposed to exist by theoretical studies but with no firm detection (as a class) so far. Recent theoretical and observational developments are leading towards the idea that these sources are instead stellar-mass BHs accreting at an unusual super-Eddington regime. In this paper we briefly describe the model SLIMULX that can be used in XSPEC for the fit of thermal spectra of slim discs around stellar mass BHs in the super-Eddington regime. This model consistently takes all relativistic effects into account. We present the obtained results from the fit of the X-ray spectra from NGC 5408 X—1.

  16. Encouraging Sustainable Transport Choices in American Households: Results from an Empirically Grounded Agent-Based Model

    Directory of Open Access Journals (Sweden)

    Davide Natalini

    2013-12-01

    Full Text Available The transport sector needs to go through an extended process of decarbonisation to counter the threat of climate change. Unfortunately, the International Energy Agency forecasts an enormous growth in the number of cars and greenhouse gas emissions by 2050. Two issues can thus be identified: (1 the need for a new methodology that could evaluate the policy performances ex-ante and (2 the need for more effective policies. To help address these issues, we developed an Agent-Based Model called Mobility USA aimed at: (1 testing whether this could be an effective approach in analysing ex-ante policy implementation in the transport sector; and (2 evaluating the effects of alternative policy scenarios on commuting behaviours in the USA. Particularly, we tested the effects of two sets of policies, namely market-based and preference-change ones. The model results suggest that this type of agent-based approach will provide a useful tool for testing policy interventions and their effectiveness.

  17. Following a trend with an exponential moving average: Analytical results for a Gaussian model

    Science.gov (United States)

    Grebenkov, Denis S.; Serror, Jeremy

    2014-01-01

    We investigate how price variations of a stock are transformed into profits and losses (P&Ls) of a trend following strategy. In the frame of a Gaussian model, we derive the probability distribution of P&Ls and analyze its moments (mean, variance, skewness and kurtosis) and asymptotic behavior (quantiles). We show that the asymmetry of the distribution (with often small losses and less frequent but significant profits) is reminiscent to trend following strategies and less dependent on peculiarities of price variations. At short times, trend following strategies admit larger losses than one may anticipate from standard Gaussian estimates, while smaller losses are ensured at longer times. Simple explicit formulas characterizing the distribution of P&Ls illustrate the basic mechanisms of momentum trading, while general matrix representations can be applied to arbitrary Gaussian models. We also compute explicitly annualized risk adjusted P&L and strategy turnover to account for transaction costs. We deduce the trend following optimal timescale and its dependence on both auto-correlation level and transaction costs. Theoretical results are illustrated on the Dow Jones index.

  18. Test results from Fermilab 1.5 m model SSC collider dipole magnets

    International Nuclear Information System (INIS)

    Koska, W.; Bossert, R.; Carson, J.; Coulter, K.J.; Delchamps, S.; Gourlay, S.; Jaffery, T.S.; Kinney, W.; Lamm, M.J.; Ozelis, J.P.; Strait, J.; Wake, M.

    1991-09-01

    We will present results from tests of 1.5 m model SSC collider dipole magnets. These R ampersand D magnets are identical to the 15 m full length dipoles currently being assembled at Fermilab in all important aspects except length. Because of their small size they can be built faster and tested more extensively than the long magnets. The model magnets are used to optimize design parameters for, and to indicate the performance which can be expected from, the 15 m magnets. The are instrumented with voltage taps over the first two current blocks for quench localization and with several arrays of strain gauge transducers for the study of mechanical behavior. The stress at the poles of the inner and outer coils is monitored during construction and, along with end force and shell strain, during excitation. Magnetic measurements are made several times during each magnet's lifetime, including at operating temperature and field. We will report on studies of the quench performance, mechanical behavior and magnetic field of these magnets

  19. Quilt: Preliminary Measurement and Model Results From The Arctic For Winter 2001/2002

    Science.gov (United States)

    Arlander, D. W.; van Roozendael, M.; Burrows, J. P.; Goutail, F.; Pfeilsticker, K.; Chipperfield, M.; Roscoe, H. K.; Gil, M.; Landgraf, J.; Ravegnani, F.

    QUILT (Quantification and Interpretation of Long-Term UV-Vis Observations of the Stratosphere) is an EU-funded project devoted to the improvement and development of GOME data products, NDSC UV/Vis ground-based and balloon-borne data, 3D-CTM optimisation and internet-based near real-time (NRT) data dissemination. QUILT a three-year project, now in its second year, aims toward the improvement of our under- standing of global concentrations and quantifying trends of stratospheric ozone and related trace gas species. The entire data record of the global NDSC UV/Vis network will be reanalysed and improvements in GOME analyses with the purpose of deter- mining ozone loss in the past, monitoring its development in the present and investi- gating its relation to active halogen and nitrogen species. Active interaction with 3-D CT modelling groups within the project ensure a quick assessment of current knowl- edge within the field. Examples of measurement and modelled results from several specific episodes of interest from the 2001/2002 winter will be shown.

  20. Critical manifold of the Potts model: Exact results and homogeneity approximation

    Science.gov (United States)

    Wu, F. Y.; Guo, Wenan

    2012-08-01

    The q-state Potts model has stood at the frontier of research in statistical mechanics for many years. In the absence of a closed-form solution, much of the past effort has focused on locating its critical manifold, trajectory in the parameter {q,eJ} space where J is the reduced interaction, along which the free energy is singular. However, except in isolated cases, antiferromagnetic (AF) models with J0. We also locate its critical frontier for JLondon Ser. A 388, 43 (1982)]. For the honeycomb lattice we show that the known critical frontier holds for all J, and determine its critical qc=(1)/(2)(3+5)=2.61803 beyond which there is no transition. For the triangular lattice we confirm the known critical frontier to hold only for J>0. More generally we consider the centered-triangle (CT) and Union-Jack (UJ) lattices consisting of mixed J and K interactions, and deduce critical manifolds under homogeneity hypotheses. For K=0 the CT lattice is the diced lattice, and we determine its critical manifold for all J and find qc=3.32472. For K=0 the UJ lattice is the square lattice and from this we deduce both the J>0 and J<0 critical manifolds and qc=3. Our theoretical predictions are compared with recent numerical results.