WorldWideScience

Sample records for model programs guide

  1. Using Runtime Analysis to Guide Model Checking of Java Programs

    Science.gov (United States)

    Havelund, Klaus; Norvig, Peter (Technical Monitor)

    2001-01-01

    This paper describes how two runtime analysis algorithms, an existing data race detection algorithm and a new deadlock detection algorithm, have been implemented to analyze Java programs. Runtime analysis is based on the idea of executing the program once. and observing the generated run to extract various kinds of information. This information can then be used to predict whether other different runs may violate some properties of interest, in addition of course to demonstrate whether the generated run itself violates such properties. These runtime analyses can be performed stand-alone to generate a set of warnings. It is furthermore demonstrated how these warnings can be used to guide a model checker, thereby reducing the search space. The described techniques have been implemented in the b e grown Java model checker called PathFinder.

  2. Managing problem employees: a model program and practical guide.

    Science.gov (United States)

    Miller, Laurence

    2010-01-01

    This article presents a model program for managing problem employees that includes a description ofthe basic types of problem employees and employee problems, as well as practical recommendations for. (1) selection and screening, (2) education and training, (3) coaching and counseling, (4) discipline, (5) psychological fitness-for-duty evaluations, (6) mental health services, (7) termination, and (8) leadership and administrative strategies. Throughout, the emphasis on balancing the need for order and productivity in the workplace with fairness and concern for employee health and well-being.

  3. Environmental Horticulture Program Guide.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This program guide contains the standard environmental horticulture curriculum for technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the environmental horticulture field. The general information section contains the following: purpose and objectives; program description,…

  4. Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user's guide

    International Nuclear Information System (INIS)

    1995-11-01

    This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ''big picture'' and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a '' top down'' approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ''top down'' approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers

  5. A Model for Infusing Energy Concepts into Vocational Education Programs. Solar Energy Curriculum Guide.

    Science.gov (United States)

    Delta Vocational Technical School, Marked Tree, AR.

    This solar energy curriculum guide is designed to assist teachers in infusing energy concepts into vocational education programs. It consists of 31 competency-based instructional units organized into 10 sections. Covered in the sections are the following topics: related instructions (history and development; human relations; general safety;…

  6. Extreme Programming Pocket Guide

    CERN Document Server

    Chromatic

    2003-01-01

    Extreme Programming (XP) is a radical new approach to software development that has been accepted quickly because its core practices--the need for constant testing, programming in pairs, inviting customer input, and the communal ownership of code--resonate with developers everywhere. Although many developers feel that XP is rooted in commonsense, its vastly different approach can bring challenges, frustrations, and constant demands on your patience. Unless you've got unlimited time (and who does these days?), you can't always stop to thumb through hundreds of pages to find the piece of info

  7. User's guide for GSMP, a General System Modeling Program. [In PL/I

    Energy Technology Data Exchange (ETDEWEB)

    Cook, J. M.

    1979-10-01

    GSMP is designed for use by systems analysis teams. Given compiled subroutines that model the behavior of components plus instructions as to how they are to be interconnected, this program links them together to model a complete system. GSMP offers a fast response to management requests for reconfigurations of old systems and even initial configurations of new systems. Standard system-analytic services are provided: parameter sweeps, graphics, free-form input and formatted output, file storage and recovery, user-tested error diagnostics, component model and integration checkout and debugging facilities, sensitivity analysis, and a multimethod optimizer with nonlinear constraint handling capability. Steady-state or cyclic time-dependence is simulated directly, initial-value problems only indirectly. The code is written in PL/I, but interfaces well with FORTRAN component models. Over the last five years GSMP has been used to model theta-pinch, tokamak, and heavy-ion fusion power plants, open- and closed-cycle magneto-hydrodynamic power plants, and total community energy systems.

  8. Hospitality Management. Florida Vocational Program Guide.

    Science.gov (United States)

    Florida State Univ., Tallahassee. Center for Instructional Development and Services.

    This program guide is intended for the implementation of a hospitality management program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, describes jobs under the program, and includes a curriculum framework and student performance standards for…

  9. ABCASH plotting program users guide

    International Nuclear Information System (INIS)

    Troyer, G.L.

    1995-01-01

    The Automated Bar Coding of Air Samples at Hanford (ABCASH) system provides an integrated data collection, sample tracking, and data reporting system for radioactive particulate air filter samples. The ABCASH plotting program provides a graphical trend report for ABCASH of the performance of air sample results. This document provides an operational guide for using the program. Based on sample location identifier and date range, a trend chart of the available data is generated. The trend chart shows radiological activity versus time. General indications of directional trend of the concentrations in air over time may be discerned. Comparison limit set point values are also shown as derived from the ABCASH data base

  10. OpenCL programming guide

    CERN Document Server

    Munshi, Aaftab; Mattson, Timothy G; Fung, James; Ginsburg, Dan

    2011-01-01

    Using the new OpenCL (Open Computing Language) standard, you can write applications that access all available programming resources: CPUs, GPUs, and other processors such as DSPs and the Cell/B.E. processor. Already implemented by Apple, AMD, Intel, IBM, NVIDIA, and other leaders, OpenCL has outstanding potential for PCs, servers, handheld/embedded devices, high performance computing, and even cloud systems. This is the first comprehensive, authoritative, and practical guide to OpenCL 1.1 specifically for working developers and software architects. Written by five leading OpenCL authorities, OpenCL Programming Guide covers the entire specification. It reviews key use cases, shows how OpenCL can express a wide range of parallel algorithms, and offers complete reference material on both the API and OpenCL C programming language. Through complete case studies and downloadable code examples, the authors show how to write complex parallel programs that decompose workloads across many different devices. They...

  11. Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ``big picture`` and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a `` top down`` approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ``top down`` approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers.

  12. User's guide to Model Viewer, a program for three-dimensional visualization of ground-water model results

    Science.gov (United States)

    Hsieh, Paul A.; Winston, Richard B.

    2002-01-01

    Model Viewer is a computer program that displays the results of three-dimensional groundwater models. Scalar data (such as hydraulic head or solute concentration) may be displayed as a solid or a set of isosurfaces, using a red-to-blue color spectrum to represent a range of scalar values. Vector data (such as velocity or specific discharge) are represented by lines oriented to the vector direction and scaled to the vector magnitude. Model Viewer can also display pathlines, cells or nodes that represent model features such as streams and wells, and auxiliary graphic objects such as grid lines and coordinate axes. Users may crop the model grid in different orientations to examine the interior structure of the data. For transient simulations, Model Viewer can animate the time evolution of the simulated quantities. The current version (1.0) of Model Viewer runs on Microsoft Windows 95, 98, NT and 2000 operating systems, and supports the following models: MODFLOW-2000, MODFLOW-2000 with the Ground-Water Transport Process, MODFLOW-96, MOC3D (Version 3.5), MODPATH, MT3DMS, and SUTRA (Version 2D3D.1). Model Viewer is designed to directly read input and output files from these models, thus minimizing the need for additional postprocessing. This report provides an overview of Model Viewer. Complete instructions on how to use the software are provided in the on-line help pages.

  13. Basic Automotive Mechanics. Florida Vocational Program Guide.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This program guide identifies primary concerns in the organization, operation, and evaluation of a basic automotive mechanics program. It is designed for local school district and community college administrators, instructors, program advisory committees, and regional coordinating councils. The guide begins with the Dictionary of Occupational…

  14. Building Maintenance. Florida Vocational Program Guide.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This program guide identifies primary concerns in the organization, operation, and evaluation of a building maintenance program. It is designed for local school district and community college administrators, instructors, program advisory committees, and regional coordinating councils. The guide begins with the Dictionary of Occupational Titles…

  15. A user's guide for the program NAMMU

    International Nuclear Information System (INIS)

    Rae, J.; Robinson, P.C.; Wickens, L.M.

    1981-06-01

    The computer program NAMMU was written to model heat and groundwater flow problems arising from underground disposal of high-level radioactive waste. At present the program handles two-dimensional time-dependent flow in permeable rock. A general description of NAMMU and the first attempts at validating the code have already been published. Since then it has begun to be applied to flows in real geological regions and it is clear that some form of user's guide has become necessary. The program will certainly undergo further extensions and modifications so this guide will not necessarily cover all aspects of later versions. The code for NAMMU is built on a very general and flexible library of finite-element subprograms written at Harwell over several years. This flexibility, and the fact that many transport problems can be expressed in substantially the same mathematical form has led already to close relatives of NAMMU being written for other transport problems. A recent example is the program MISCFLO which computes solute transport in a form appropriate to miscible displacement flow in oil reservoirs. The NAMMU user's guide applies equally to such close relatives. (author)

  16. Model Curriculum And Trainer's Guide for Programs to Combat White-Collar Crime.

    Science.gov (United States)

    Karchmer, Clifford L.

    This model curriculum is addressed to the training needs of personnel working in general white-collar crime assignments located in state and local police or prosecutors' offices. It is designed intentionally to orient personnel to the requirements of building a case as it moves along the enforcement process. Materials on trainer use and…

  17. Designing Aquatic Exercise Programs--Three Guiding Principles.

    Science.gov (United States)

    White, Sue W.; Landis, Larry M.

    1989-01-01

    Three guiding principles provide the planner of aquatic exercise programs with a model that helps to ensure an effective program: principles of resource availability and allocation; the principle of fit, which involves matching instructor leadership style with program objectives; and the principle of attitude and perception modification. (IAH)

  18. User's guide to the MESOI diffusion model and to the utility programs UPDATE and LOGRVU

    Energy Technology Data Exchange (ETDEWEB)

    Athey, G.F.; Allwine, K.J.; Ramsdell, J.V.

    1981-11-01

    MESOI is an interactive, Lagrangian puff trajectory diffusion model. The model is documented separately (Ramsdell and Athey, 1981); this report is intended to provide MESOI users with the information needed to successfully conduct model simulations. The user is also provided with guidance in the use of the data file maintenance and review programs; UPDATE and LOGRVU. Complete examples are given for the operaton of all three programs and an appendix documents UPDATE and LOGRVU.

  19. Gasoline Engine Mechanics. Florida Vocational Program Guide.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This vocational program guide is intended to assist in the organization, operation, and evaluation of a program in gasoline engine mechanics in school districts, area vocational centers, and community colleges. The following topics are covered: job duties of small-engine mechanics; program content (curriculum framework and student performance…

  20. Fashion Marketing. Florida Vocational Program Guide.

    Science.gov (United States)

    Florida State Univ., Tallahassee. Center for Instructional Development and Services.

    This vocational program guide is intended to assist in the organization, operation, and evaluation of a program in fashion marketing in school districts, area vocational centers, and community colleges. The following topics are covered: program content (job duties of wholesale and retail clothing salespersons and curriculum framework and student…

  1. User's guide to program RCN

    International Nuclear Information System (INIS)

    Cowan, R.D.; Rajnak, K.; Renard, P.

    1976-06-01

    This is a set of three Fortran IV programs, RCN29, HFMOD7, and RCN229, based on the Herman--Skillman and Charlotte Froese Fischer programs, with extensive modifications and additions. The programs compute self-consistent-field radial wave functions and the various radial integrals involved in the computation of atomic energy levels and spectra

  2. School Administrator's Guide to Implementing Language Programming

    Science.gov (United States)

    Alberta Education, 2007

    2007-01-01

    The "School Administrator's Guide to Implementing Language Programming" serves as a starting point to plan for and implement language programming. It provides a general overview; suggests practical strategies for working with students, parents, teachers and the surrounding community; and includes details on areas to address in selecting…

  3. Teen Drinking Prevention Program. Event Action Guide.

    Science.gov (United States)

    Substance Abuse and Mental Health Services Administration (DHHS/PHS), Rockville, MD. Center for Substance Abuse Prevention.

    Underage drinking presents a serious health risk not only to young people themselves but to entire communities. This program guide is designed to help communities establish their own underage drinking prevention programs. Community norms, actions, and attitudes toward alcohol affect young people, as do the ways in which alcohol is promoted.…

  4. Guided Synthesis of Control Programs Using UPPAAL

    DEFF Research Database (Denmark)

    Hune, T.; Larsen, Kim Guldstrand; Pettersson, P.

    2000-01-01

    the transitions with extra guards. Applying this technique have made synthesis of control programs feasible for a plant producing as many as 60 batches. In comparison, we could only handle plants producing two batches without using guides. The synthesized control programs have been executed in a physical plant...

  5. Commercial Refrigeration Technology. Florida Vocational Program Guide.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    The program guide for commercial refrigeration technology courses in Florida identifies primary considerations for the organization, operation, and evaluation of a vocational education program. Following an occupational description for the job title for refrigeration mechanic, and its Dictionary of Occupational Titles code, are six sections…

  6. LISA package user guide. Part III: SPOP (Statistical POst Processor). Uncertainty and sensitivity analysis for model output. Program description and user guide

    International Nuclear Information System (INIS)

    Saltelli, A.; Homma, T.

    1992-01-01

    This manual is subdivided into three parts. In the third part, the SPOP (Statistical POst Processor) code is described as a tool to perform Uncertainty and Sensitivity Analyses on the output of a User implemented model. It has been developed at the joint Research Centre of Ispra as part of the LISA package. SPOP performs Sensitivity Analysis (SA) and Uncertainty Analysis (UA) on a sample output from a Monte Carlo simulation. The sample is generated by the User and contains values of the output variable (in the form of a time series) and values of the input variables for a set of different simulations (runs), which are realised by varying the model input parameters. The User may generate the Monte Carlo sample with the PREP pre-processor, another module of the LISA package. The SPOP code is completely written in FORTRAN 77 using structured programming. Among the tasks performed by the code are the computation of Tchebycheff and Kolmogorov confidence bounds on the output variable (UA), and the use of effective non-parametric statistics to rank the influence of model input parameters (SA). The statistics employed are described in the present manual. 19 refs., 16 figs., 2 tabs. Note: This PART III is a revised version of the previous EUR report N.12700EN (1990)

  7. Modeling of complex melting and solidification behavior in laser-irradiated materials [a description and users guide to the LASER8 computer program

    International Nuclear Information System (INIS)

    Geist, G.A.; Wood, R.F.

    1985-11-01

    The conceptual foundation of a computational model and a computer program based on it have been developed for treating various aspects of the complex melting and solidification behavior observed in pulsed laser-irradiated materials. A particularly important feature of the modeling is the capability of allowing melting and solidification to occur at temperatures other than the thermodynamic phase change temperatures. As a result, interfacial undercooling and overheating can be introduced and various types of nucleation events can be simulated. Calculations on silicon with the model have shown a wide variety of behavior, including the formation and propagation of multiple phase fronts. Although originally developed as a tool for studying certain problems arising in the field of laser annealing of semiconductors, the program should be useful in treating many types of systems in which phase changes and nucleation phenomena play important roles. This report describes the underlying physical and mathematical ideas and the basic relations used in LASER8. It also provides enough specific and detailed information on the program to serve as a guide for its use; a listing of one version of the program is given

  8. The chaos cookbook a practical programming guide

    CERN Document Server

    Pritchard, Joe

    2014-01-01

    The Chaos Cookbook: A Practical Programming Guide discusses the use of chaos in computer programming. The book is comprised of 11 chapters that tackle various topics relevant to chaos and programming. Chapter 1 reviews the concept of chaos, and Chapter 2 discusses the iterative functions. Chapters 3 and 4 cover differential and Lorenz equations. Chapter 5 talks about strange attractors, while Chapter 6 deals with the fractal link. The book also discusses the Mandelbrot set, and then covers the Julia sets. The other fractal systems and the cellular automata are also explained. The last chapter

  9. FORSPAN Model Users Guide

    Science.gov (United States)

    Klett, T.R.; Charpentier, Ronald R.

    2003-01-01

    The USGS FORSPAN model is designed for the assessment of continuous accumulations of crude oil, natural gas, and natural gas liquids (collectively called petroleum). Continuous (also called ?unconventional?) accumulations have large spatial dimensions and lack well defined down-dip petroleum/water contacts. Oil and natural gas therefore are not localized by buoyancy in water in these accumulations. Continuous accumulations include ?tight gas reservoirs,? coalbed gas, oil and gas in shale, oil and gas in chalk, and shallow biogenic gas. The FORSPAN model treats a continuous accumulation as a collection of petroleumcontaining cells for assessment purposes. Each cell is capable of producing oil or gas, but the cells may vary significantly from one another in their production (and thus economic) characteristics. The potential additions to reserves from continuous petroleum resources are calculated by statistically combining probability distributions of the estimated number of untested cells having the potential for additions to reserves with the estimated volume of oil and natural gas that each of the untested cells may potentially produce (total recovery). One such statistical method for combination of number of cells with total recovery, used by the USGS, is called ACCESS.

  10. Basic Gasoline Engine Mechanics. Florida Vocational Program Guide.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a basic gasoline engine mechanics program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes a…

  11. Revised user's guide to the 'DISPOSALS' model

    International Nuclear Information System (INIS)

    Laundy, R.S.; James, A.R.; Groom, M.S.; LeJeune, S.R.

    1985-04-01

    This report provides a User's Guide to the 'DISPOSALS' computer model and includes instructions on how to set up and run a specific problem together with details of the scope, theoretical basis, data requirements and capabilities of the model. The function of the 'DISPOSALS' model is to make assignments of nuclear waste material in an optimum manner to a number of disposal sites each subject to a number of constraints such as limits on the volume and activity. The user is able to vary the number of disposal sites, the range and limits of the constraints to be applied to each disposal site and the objective function for optimisation. The model is based on the Linear Programming technique and uses CAP Scientific's LAMPS and MAGIC packages. Currently the model has been implemented on CAP Scientific's VAX 11/750 minicomputer. (author)

  12. User's guide to the 'DISPOSALS' model

    International Nuclear Information System (INIS)

    Groom, M.S.; James, A.R.; Laundy, R.S.

    1984-03-01

    This report provides a User's Guide to the 'DISPOSALS' computer model and includes instructions on how to set up and run a specific problem together with details of the scope, theoretical basis, data requirements and capabilities of the model. The function of the 'DISPOSALS' model is to make assignments of nuclear waste material in an optimum manner to a number of disposal sites each subject to a number of constraints such as limits on the volume and activity. The user is able to vary the number of disposal sites, the range and limits of the constraints to be applied to each disposal site and the objective function for optimisation. The model is based on the Linear Programming technique and uses CAP Scientific's LAMPS and MAGIC packages. Currently the model has been implemented on CAP Scientific's VAX 11/750 minicomputer. (author)

  13. Building Maintenance and Utilities Management. Florida Vocational Program Guide.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This program guide identifies primary concerns in the organization, operation, and evaluation of a building maintenance and utilities management program. It is designed for local school district and community college administrators, instructors, program advisory committees, and regional coordinating councils. The guide begins with the Dictionary…

  14. Elements of programming interviews the insider's guide

    CERN Document Server

    Aziz, Adnan; Prakash, Amit

    2015-01-01

    This is a larger-format version of Elements of Programming Interviews. The language is C++. Specifically, the font size is larger, and the page size is 7"x10" (the regular format uses 6"x9"). The content is identical. Have you ever... Wanted to work at an exciting futuristic company? Struggled with an interview problem that could have been solved in 15 minutes? Wished you could study real-world computing problems? If so, you need to read Elements of Programming Interviews (EPI). EPI is your comprehensive guide to interviewing for software development roles. The core of EPI is a collection of over 250 problems with detailed solutions. The problems are representative of interview questions asked at leading software companies. The problems are illustrated with 200 figures, 300 tested programs, and 150 additional variants. The book begins with a summary of the nontechnical aspects of interviewing, such as strategies for a great interview, common mistakes, perspectives from the other side of the table,...

  15. Huntington II Simulation Program-POLUT. Teacher's Guide.

    Science.gov (United States)

    Braun, L.; And Others

    This teacher's guide is written to accompany the Huntington II Simulation Program - POLUT. POLUT is a program written in BASIC which provides simulation of the interaction between water and waste. It creates a context within which the user can control specific variables which effect the quality of a water resource. The teacher's guide provides…

  16. Drunk Driving Public Information Program Strategies and Planning Guide.

    Science.gov (United States)

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    This guide, designed to accompany a videocassette of selected television spots is a compendium of specific drunk driving topics and issues for each of the major planning steps of a public information program. The guide is organized around these steps, which are (1) select program strategies, (2) select target audiences, (3) select media channels,…

  17. Automatic detection of the carotid artery boundary on cross-sectional MR image sequences using a circle model guided dynamic programming

    Directory of Open Access Journals (Sweden)

    Brambs Hans

    2011-04-01

    Full Text Available Abstract Background Systematic aerobe training has positive effects on the compliance of dedicated arterial walls. The adaptations of the arterial structure and function are associated with the blood flow-induced changes of the wall shear stress which induced vascular remodelling via nitric oxide delivered from the endothelial cell. In order to assess functional changes of the common carotid artery over time in these processes, a precise measurement technique is necessary. Before this study, a reliable, precise, and quick method to perform this work is not present. Methods We propose a fully automated algorithm to analyze the cross-sectional area of the carotid artery in MR image sequences. It contains two phases: (1 position detection of the carotid artery, (2 accurate boundary identification of the carotid artery. In the first phase, we use intensity, area size and shape as features to discriminate the carotid artery from other tissues and vessels. In the second phase, the directional gradient, Hough transform, and circle model guided dynamic programming are used to identify the boundary accurately. Results We test the system stability using contrast degraded images (contrast resolutions range from 50% to 90%. The unsigned error ranges from 2.86% ± 2.24% to 3.03% ± 2.40%. The test of noise degraded images (SNRs range from 16 to 20 dB shows the unsigned error ranging from 2.63% ± 2.06% to 3.12% ± 2.11%. The test of raw images has an unsigned error 2.56% ± 2.10% compared to the manual tracings. Conclusions We have proposed an automated system which is able to detect carotid artery cross sectional boundary in MRI sequences during heart cycles. The accuracy reaches 2.56% ± 2.10% compared to the manual tracings. The system is stable, reliable and results are reproducible.

  18. Wake Vortex Inverse Model User's Guide

    Science.gov (United States)

    Lai, David; Delisi, Donald

    2008-01-01

    NorthWest Research Associates (NWRA) has developed an inverse model for inverting landing aircraft vortex data. The data used for the inversion are the time evolution of the lateral transport position and vertical position of both the port and starboard vortices. The inverse model performs iterative forward model runs using various estimates of vortex parameters, vertical crosswind profiles, and vortex circulation as a function of wake age. Forward model predictions of lateral transport and altitude are then compared with the observed data. Differences between the data and model predictions guide the choice of vortex parameter values, crosswind profile and circulation evolution in the next iteration. Iterations are performed until a user-defined criterion is satisfied. Currently, the inverse model is set to stop when the improvement in the rms deviation between the data and model predictions is less than 1 percent for two consecutive iterations. The forward model used in this inverse model is a modified version of the Shear-APA model. A detailed description of this forward model, the inverse model, and its validation are presented in a different report (Lai, Mellman, Robins, and Delisi, 2007). This document is a User's Guide for the Wake Vortex Inverse Model. Section 2 presents an overview of the inverse model program. Execution of the inverse model is described in Section 3. When executing the inverse model, a user is requested to provide the name of an input file which contains the inverse model parameters, the various datasets, and directories needed for the inversion. A detailed description of the list of parameters in the inversion input file is presented in Section 4. A user has an option to save the inversion results of each lidar track in a mat-file (a condensed data file in Matlab format). These saved mat-files can be used for post-inversion analysis. A description of the contents of the saved files is given in Section 5. An example of an inversion input

  19. Defense programs beryllium good practice guide

    International Nuclear Information System (INIS)

    Herr, M.

    1997-07-01

    Within the DOE, it has recently become apparent that some contractor employees who have worked (or are currently working) with and around beryllium have developed chronic beryllium disease (CBD), an occupational granulomatous lung disorder. Respiratory exposure to aerosolized beryllium, in susceptible individuals, causes an immunological reaction that can result in granulomatous scarring of the lung parenchyma, shortness of breath, cough, fatigue, weight loss, and, ultimately, respiratory failure. Beryllium disease was originally identified in the 1940s, largely in the fluorescent light industry. In 1950, the Atomic Energy Commission (AEC) introduced strict exposure standards that generally curtailed both the acute and chronic forms of the disease. Beginning in 1984, with the identification of a CBD case in a DOE contractor worker, there was increased scrutiny of both industrial hygiene practices and individuals in this workforce. To date, over 100 additional cases of beryllium-specific sensitization and/or CBD have been identified. Thus, a disease previously thought to be largely eliminated by the adoption of permissible exposure standards 45 years ago is still a health risk in certain workforces. This good practice guide forms the basis of an acceptable program for controlling workplace exposure to beryllium. It provides (1) Guidance for minimizing worker exposure to beryllium in Defense Programs facilities during all phases of beryllium-related work, including the decontamination and decommissioning (D ampersand D) of facilities. (2) Recommended controls to be applied to the handling of metallic beryllium and beryllium alloys, beryllium oxide, and other beryllium compounds. (3) Recommendations for medical monitoring and surveillance of workers exposed (or potentially exposed) to beryllium, based on the best current understanding of beryllium disease and medical diagnostic tests available. (4) Site-specific safety procedures for all processes of beryllium that is

  20. Users' guide for the Accelerated Leach Test Computer Program

    International Nuclear Information System (INIS)

    Fuhrmann, M.; Heiser, J.H.; Pietrzak, R.; Franz, Eena-Mai; Colombo, P.

    1990-11-01

    This report is a step-by-step guide for the Accelerated Leach Test (ALT) Computer Program developed to accompany a new leach test for solidified waste forms. The program is designed to be used as a tool for performing the calculations necessary to analyze leach test data, a modeling program to determine if diffusion is the operating leaching mechanism (and, if not, to indicate other possible mechanisms), and a means to make extrapolations using the diffusion models. The ALT program contains four mathematical models that can be used to represent the data. The leaching mechanisms described by these models are: (1) diffusion through a semi-infinite medium (for low fractional releases), (2) diffusion through a finite cylinder (for high fractional releases), (3) diffusion plus partitioning of the source term, (4) solubility limited leaching. Results are presented as a graph containing the experimental data and the best-fit model curve. Results can also be output as LOTUS 1-2-3 files. 2 refs

  1. Defense programs beryllium good practice guide

    Energy Technology Data Exchange (ETDEWEB)

    Herr, M.

    1997-07-01

    Within the DOE, it has recently become apparent that some contractor employees who have worked (or are currently working) with and around beryllium have developed chronic beryllium disease (CBD), an occupational granulomatous lung disorder. Respiratory exposure to aerosolized beryllium, in susceptible individuals, causes an immunological reaction that can result in granulomatous scarring of the lung parenchyma, shortness of breath, cough, fatigue, weight loss, and, ultimately, respiratory failure. Beryllium disease was originally identified in the 1940s, largely in the fluorescent light industry. In 1950, the Atomic Energy Commission (AEC) introduced strict exposure standards that generally curtailed both the acute and chronic forms of the disease. Beginning in 1984, with the identification of a CBD case in a DOE contractor worker, there was increased scrutiny of both industrial hygiene practices and individuals in this workforce. To date, over 100 additional cases of beryllium-specific sensitization and/or CBD have been identified. Thus, a disease previously thought to be largely eliminated by the adoption of permissible exposure standards 45 years ago is still a health risk in certain workforces. This good practice guide forms the basis of an acceptable program for controlling workplace exposure to beryllium. It provides (1) Guidance for minimizing worker exposure to beryllium in Defense Programs facilities during all phases of beryllium-related work, including the decontamination and decommissioning (D&D) of facilities. (2) Recommended controls to be applied to the handling of metallic beryllium and beryllium alloys, beryllium oxide, and other beryllium compounds. (3) Recommendations for medical monitoring and surveillance of workers exposed (or potentially exposed) to beryllium, based on the best current understanding of beryllium disease and medical diagnostic tests available. (4) Site-specific safety procedures for all processes of beryllium that is likely to

  2. Standard Guide for Radiation Protection Program for Decommissioning Operations

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1987-01-01

    1.1 This guide provides instruction to the individual charged with the responsibility for developing and implementing the radiation protection program for decommissioning operations. 1.2 This guide provides a basis for the user to develop radiation protection program documentation that will support both the radiological engineering and radiation safety aspects of the decommissioning project. 1.3 This guide presents a description of those elements that should be addressed in a specific radiation protection plan for each decommissioning project. The plan would, in turn, form the basis for development of the implementation procedures that execute the intent of the plan. 1.4 This guide applies to the development of radiation protection programs established to control exposures to radiation and radioactive materials associated with the decommissioning of nuclear facilities. The intent of this guide is to supplement existing radiation protection programs as they may pertain to decommissioning workers, members of...

  3. A student's guide to Python for physical modeling

    CERN Document Server

    Kinder, Jesse M

    2015-01-01

    Python is a computer programming language that is rapidly gaining popularity throughout the sciences. A Student’s Guide to Python for Physical Modeling aims to help you, the student, teach yourself enough of the Python programming language to get started with physical modeling. You will learn how to install an open-source Python programming environment and use it to accomplish many common scientific computing tasks: importing, exporting, and visualizing data; numerical analysis; and simulation. No prior programming experience is assumed. This tutorial focuses on fundamentals and introduces a wide range of useful techniques, including: Basic Python programming and scripting Numerical arrays Two- and three-dimensional graphics Monte Carlo simulations Numerical methods, including solving ordinary differential equations Image processing Animation Numerous code samples and exercises—with solutions—illustrate new ideas as they are introduced. A website that accompanies this guide provides additional resourc...

  4. Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide

    Science.gov (United States)

    Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.

    1993-01-01

    A Nuclear Thermal Propulsion (NTP) engine system design analysis tool is required to support current and future Space Exploration Initiative (SEI) propulsion and vehicle design studies. Currently available NTP engine design models are those developed during the NERVA program in the 1960's and early 1970's and are highly unique to that design or are modifications of current liquid propulsion system design models. To date, NTP engine-based liquid design models lack integrated design of key NTP engine design features in the areas of reactor, shielding, multi-propellant capability, and multi-redundant pump feed fuel systems. Additionally, since the SEI effort is in the initial development stage, a robust, verified NTP analysis design tool could be of great use to the community. This effort developed an NTP engine system design analysis program (tool), known as the Nuclear Engine System Simulation (NESS) program, to support ongoing and future engine system and stage design study efforts. In this effort, Science Applications International Corporation's (SAIC) NTP version of the Expanded Liquid Engine Simulation (ELES) program was modified extensively to include Westinghouse Electric Corporation's near-term solid-core reactor design model. The ELES program has extensive capability to conduct preliminary system design analysis of liquid rocket systems and vehicles. The program is modular in nature and is versatile in terms of modeling state-of-the-art component and system options as discussed. The Westinghouse reactor design model, which was integrated in the NESS program, is based on the near-term solid-core ENABLER NTP reactor design concept. This program is now capable of accurately modeling (characterizing) a complete near-term solid-core NTP engine system in great detail, for a number of design options, in an efficient manner. The following discussion summarizes the overall analysis methodology, key assumptions, and capabilities associated with the NESS presents an

  5. A guide to the TWIGS program for the North Central United States.

    Science.gov (United States)

    Cynthia L. Miner; Nancy R. Walters; Monique L. Belli

    1988-01-01

    This is a complete reference to TWIGS, a forest growth-and-yield program with management and economic components developed for Lake and Central States tree species. The guide describes how TWIGS models growth and yield and how the model can be applied to obtain the best results. Step-by-step operating instructions are provided for TWIGS and its companion program,...

  6. Model Commissioning Plan and Guide Specifications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The objectives of Model Commissioning Plan and Guide Specifications are to ensure that the design team applies commissioning concepts to the design and prepares commissioning specifications and a commission plan for inclusion in the bid construction documents.

  7. Florida Vocational Program Guide for Basic Precision Machining, Precision Machining.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This program guide has been developed to provide information that will be useful to local school district and community college administrators, instructors, program advisory committee members, regional coordinating councils, and others charged with the responsibility of offering vocational education programs in Florida. It identifies the major…

  8. Natural Resources and Forest Ecology. Florida Vocational Program Guide.

    Science.gov (United States)

    Florida State Univ., Tallahassee. Center for Instructional Development and Services.

    This program guide identifies primary considerations in the organization, operation, and evaluation of a natural resources and forest ecology program. Program content is presented first. A curriculum framework specifies the exact course title, course number, levels of instruction, major course content, laboratory activities, special notes, major…

  9. Guide to APA-Based Models

    Science.gov (United States)

    Robins, Robert E.; Delisi, Donald P.

    2008-01-01

    In Robins and Delisi (2008), a linear decay model, a new IGE model by Sarpkaya (2006), and a series of APA-Based models were scored using data from three airports. This report is a guide to the APA-based models.

  10. Federal Smart Cities and Communities Programs Resource Guide

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The Federal Smart Cities and Communities Task Force created the " Federal Smart Cities and Communities Programs Resource Guide " to facilitate collaboration and...

  11. Programming Models in HPC

    Energy Technology Data Exchange (ETDEWEB)

    Shipman, Galen M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-06-13

    These are the slides for a presentation on programming models in HPC, at the Los Alamos National Laboratory's Parallel Computing Summer School. The following topics are covered: Flynn's Taxonomy of computer architectures; single instruction single data; single instruction multiple data; multiple instruction multiple data; address space organization; definition of Trinity (Intel Xeon-Phi is a MIMD architecture); single program multiple data; multiple program multiple data; ExMatEx workflow overview; definition of a programming model, programming languages, runtime systems; programming model and environments; MPI (Message Passing Interface); OpenMP; Kokkos (Performance Portable Thread-Parallel Programming Model); Kokkos abstractions, patterns, policies, and spaces; RAJA, a systematic approach to node-level portability and tuning; overview of the Legion Programming Model; mapping tasks and data to hardware resources; interoperability: supporting task-level models; Legion S3D execution and performance details; workflow, integration of external resources into the programming model.

  12. Modeling EERE deployment programs

    Energy Technology Data Exchange (ETDEWEB)

    Cort, K. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hostick, D. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Belzer, D. B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Livingston, O. V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2007-11-01

    The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address possible improvements to the modeling process, and note gaps in knowledge for future research.

  13. Monte Carlo program for the cold neutron beam guide

    International Nuclear Information System (INIS)

    Yoshiki, H.

    1985-02-01

    A Monte Carlo program for the transport of cold neutrons through beam guides has been developed assuming that the neutrons follow the specular reflections. Cold neutron beam guides are normally used to transport cold neutrons (4 ∼ 10 Angstrom) to experimental equipments such as small angle scattering apparatus, TOF measuring devices, polarized neutron spectrometers, and ultra cold neutron generators, etc. The beam guide is about tens of meters in length and is composed from a meter long guide elements made up from four pieces of Ni coated rectangular optical glass. This report describes mathematics and algorithm employed in the Monte Carlo program together with the display of the results. The source program and input data listings are also attached. (Aoki, K.)

  14. SHEDS-Multimedia Model Version 3 (a) Technical Manual; (b) User Guide; and (c) Executable File to Launch SAS Program and Install Model

    Science.gov (United States)

    Reliable models for assessing human exposures are important for understanding health risks from chemicals. The Stochastic Human Exposure and Dose Simulation model for multimedia, multi-route/pathway chemicals (SHEDS-Multimedia), developed by EPA’s Office of Research and Developm...

  15. The complete guide to blender graphics computer modeling and animation

    CERN Document Server

    Blain, John M

    2014-01-01

    Smoothly Leads Users into the Subject of Computer Graphics through the Blender GUIBlender, the free and open source 3D computer modeling and animation program, allows users to create and animate models and figures in scenes, compile feature movies, and interact with the models and create video games. Reflecting the latest version of Blender, The Complete Guide to Blender Graphics: Computer Modeling & Animation, 2nd Edition helps beginners learn the basics of computer animation using this versatile graphics program. This edition incorporates many new features of Blender, including developments

  16. TEACHER'S GUIDE FOR THE TRAINABLE PROGRAM.

    Science.gov (United States)

    Baltimore City Public Schools, MD.

    THE TRAINABLE PROGRAM IS DISCUSSED IN TERMS OF CONTENT, SCHEDULING, PLANNING, AND RECORDS. PROGRAM CONTENT IS OUTLINED UNDER THE MAIN CATEGORIES OF BASIC HABITS AND ATTITUDES, CLASSROOM ACTIVITIES, SENSE TRAINING ACTIVITIES, SOCIAL LIVING ACTIVITIES, HEALTH-SAFETY-SCIENCE, MUSIC ACTIVITIES, AND HANDICRAFT ACTIVITIES. SCHEDULING A DAILY PROGRAM IS…

  17. NORTRIP emission model user guide

    Energy Technology Data Exchange (ETDEWEB)

    Denby, Rolstad Bruce

    2012-07-01

    The NORTRIP emission model has been developed at NILU, in conjunction with other Nordic institutes, to model non-exhaust traffic induced emissions. This short summary document explains how to run the NORTRIP model from the MATLAB environment or by using the executable user interface version. It also provides brief information on input files and the model architecture.(Author)

  18. Celebrate the Constitution: A Guide for Public Programs in the Humanities, 1987-1991.

    Science.gov (United States)

    Federation of State Humanities Councils, Washington, DC.

    With the Bicentennial Bookshelf as a foundation stone, communities will be able to stimulate public discourse on the meaning of constitutionalism in the United States through the use of this guide. Guidelines and model programs are provided for initiating reading and discussion programs, conferences, lectures series, and seminars and institutes.…

  19. Industrial Machinery Maintenance and Repair. Florida Vocational Program Guide.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This vocational program guide is intended to assist in the organization, operation, and evaluation of a program in industrial machinery maintenance and repair in school districts, area vocational centers, and community colleges. The following topics are covered: job duties of millwrights, maintenance mechanics, and machinery erectors; program…

  20. User guide of the QCB26 program

    International Nuclear Information System (INIS)

    Perusquia C, R.; Sanchez H, L.

    1992-06-01

    This procedure will be used for the Fuel Management group of the Laguna Verde Nuclear Power station as the basic instructive that allows to use the QCB26.EXE program. This program allows to administer the information of the patterns of bars and thermal hydraulics parameters of the Pl reports of the computer process, to generate impressions of the captured base, to form data enter for the PRESTO program and to print PT type reports. (Author)

  1. Interactive data manipulation program. FAWTEK user guide

    International Nuclear Information System (INIS)

    Boyer, W.B.; Sauer, S.

    1980-02-01

    This report describes the interactive data acquisition and manipulation program FAWTEK.'The program allows users of the electron beam data acquisition facility to control the R7912 digitizers and to perform a variety of mathematical operations on data arrays. Commands are entered in a high level language via a Tektronix 4010 terminal console. Each command directive and associated parameters is described in detail

  2. Modeling EERE Deployment Programs

    Energy Technology Data Exchange (ETDEWEB)

    Cort, K. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hostick, D. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Belzer, D. B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Livingston, O. V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2007-11-01

    This report compiles information and conclusions gathered as part of the “Modeling EERE Deployment Programs” project. The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address possible improvements to the modeling process, and note gaps in knowledge in which future research is needed.

  3. Interactive data manipulation program FAWTEK user guide

    International Nuclear Information System (INIS)

    Boyer, W.B.

    1977-02-01

    The interactive data acquisitio and manipulation program FAWTEK is described. The program allows users of the electron beam data acquisition facility to control the R7912 digitizers and to perform a variety of mathematical operations on data arrays. Commands are entered in a high-level language via a Tektronix 4010 terminal console. Each command directive, aling with its associated parameters, is described in detail

  4. Los Alamos Programming Models

    Energy Technology Data Exchange (ETDEWEB)

    Bergen, Benjamin Karl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-07-07

    This is the PDF of a powerpoint presentation from a teleconference on Los Alamos programming models. It starts by listing their assumptions for the programming models and then details a hierarchical programming model at the System Level and Node Level. Then it details how to map this to their internal nomenclature. Finally, a list is given of what they are currently doing in this regard.

  5. EPRI Guide to Managing Nuclear Utility Protective Clothing Programs

    International Nuclear Information System (INIS)

    Kelly, J.J.; Kelly, D.M.

    1993-10-01

    The Electric Power Research Institute (EPRI) commissioned a radioactive waste related project (RP2414-34) in 1989 to produce a guide for developing and managing nuclear plant protective clothing programs. Every nuclear facility must coordinate some type of protective clothing program for its radiation workers to ensure proper and safe protection for the wearer and to maintain control over the spread of contamination. Yet, every nuclear facility has developed its own unique program for managing such clothing. Accordingly, a need existed for a reference guide to assist with standardizing protective clothing programs and in controlling the potentially escalating economics of such programs. The initial Guide to Managing Nuclear Utility Protective Clothing Programs, NP-7309, was published in May 1991. Since that time, a number of utilities have reviewed and/or used the report to enhance their protective clothing programs. Some of these utilities requested that a computer program be developed to assist utilities in evaluating the economics of protective clothing programs consistent with the guidance in NP-7309. The PCEVAL computer code responds to that industry need. This report, the PCEVAL User's Manual, provides detailed instruction on use of the software

  6. RCRA corrective action program guide (Interim)

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The US Department of Energy (DOE) is responsible for compliance with an increasingly complex spectrum of environmental regulations. One of the most complex programs is the corrective action program proposed by the US Environmental Protection Agency (EPA) under the authority of the Resource Conservation and Recovery Act (RCRA) as amended by the Hazardous and Solid Waste Amendments (HSWA). The proposed regulations were published on July 27, 1990. The proposed Subpart S rule creates a comprehensive program for investigating and remediating releases of hazardous wastes and hazardous waste constituents from solid waste management units (SWMUs) at facilities permitted to treat, store, or dispose of hazardous wastes. This proposed rule directly impacts many DOE facilities which conduct such activities. This guidance document explains the entire RCRA Corrective Action process as outlined by the proposed Subpart S rule, and provides guidance intended to assist those persons responsible for implementing RCRA Corrective Action at DOE facilities.

  7. Language Teaching Models in Teacher Training Programs

    OpenAIRE

    Aslan, Alper

    2016-01-01

    Any language teacher who has gone through some kind of training program for the teaching of English should be familiar with various specific language teaching models that constitute the core of the training process. A language teaching model is a guide that helps the trainee to sequence the activities designed for the expectations and needs of learners in a lesson. This paper reviews the common language teaching models in teacher training programs (PPP, OHE, III, TTT, TBLT, ESA, ARC) and disc...

  8. SEAFOOD MERCHANDISING, A GUIDE FOR TRAINING PROGRAMS.

    Science.gov (United States)

    BEAUMONT, JOHN A.

    GUIDELINES ARE SUGGESTED FOR THE PROMOTION AND ORGANIZATION OF TRAINING PROGRAMS THAT WILL AID IN THE ORDERLY DISTRIBUTION OF FISHERY PRODUCTS TO THE CONSUMER. THE MATERIAL WAS DEVELOPED AS A RESULT OF A RESEARCH PROJECT CONDUCTED BY THE EDUCATIONAL SERVICE BUREAU AND THE DISTRIBUTIVE EDUCATION SERVICE OF TEMPLE UNIVERSITY. CHAPTERS IN THE GUIDE…

  9. Safety in Riding Programs: A Director's Guide.

    Science.gov (United States)

    Kpachavi, Teresa

    1996-01-01

    Camp riding programs should be examined regularly for liability and risk management issues. Elements of a basic safety assessment include requiring proper safety apparel, removing obstructions from riding rings, ensuring doors and gates are closed, requiring use of lead ropes, securing equine medications, banning smoking, posting written…

  10. Financial Management Guide: Child Care Food Program.

    Science.gov (United States)

    Kentucky State Dept. of Education, Frankfort.

    Intended for day care providers in Kentucky, this publication contains sample forms and guidelines for filling out the forms required by the Division of School Food Services of the Kentucky Department of Education. Topics covered include allowable expenditures during the month, program income, records, auditing, reimbursement for sponsors of child…

  11. Clinical ladder program implementation: a project guide.

    Science.gov (United States)

    Ko, Yu Kyung; Yu, Soyoung

    2014-11-01

    This article describes the development of a clinical ladder program (CLP) implementation linked to a promotion system for nurses. The CLP task force developed criteria for each level of performance and a performance evaluation tool reflecting the self-motivation of the applicant for professional development. One year after implementation, the number of nurses taking graduate courses increased, and 7 nurses were promoted to nurse manager positions.

  12. EQ6, a computer program for reaction path modeling of aqueous geochemical systems: Theoretical manual, user`s guide, and related documentation (Version 7.0); Part 4

    Energy Technology Data Exchange (ETDEWEB)

    Wolery, T.J.; Daveler, S.A.

    1992-10-09

    EQ6 is a FORTRAN computer program in the EQ3/6 software package (Wolery, 1979). It calculates reaction paths (chemical evolution) in reacting water-rock and water-rock-waste systems. Speciation in aqueous solution is an integral part of these calculations. EQ6 computes models of titration processes (including fluid mixing), irreversible reaction in closed systems, irreversible reaction in some simple kinds of open systems, and heating or cooling processes, as well as solve ``single-point`` thermodynamic equilibrium problems. A reaction path calculation normally involves a sequence of thermodynamic equilibrium calculations. Chemical evolution is driven by a set of irreversible reactions (i.e., reactions out of equilibrium) and/or changes in temperature and/or pressure. These irreversible reactions usually represent the dissolution or precipitation of minerals or other solids. The code computes the appearance and disappearance of phases in solubility equilibrium with the water. It finds the identities of these phases automatically. The user may specify which potential phases are allowed to form and which are not. There is an option to fix the fugacities of specified gas species, simulating contact with a large external reservoir. Rate laws for irreversible reactions may be either relative rates or actual rates. If any actual rates are used, the calculation has a time frame. Several forms for actual rate laws are programmed into the code. EQ6 is presently able to model both mineral dissolution and growth kinetics.

  13. EQ6, a computer program for reaction path modeling of aqueous geochemical systems: Theoretical manual, user's guide, and related documentation (Version 7.0)

    International Nuclear Information System (INIS)

    Wolery, T.J.; Daveler, S.A.

    1992-01-01

    EQ6 is a FORTRAN computer program in the EQ3/6 software package (Wolery, 1979). It calculates reaction paths (chemical evolution) in reacting water-rock and water-rock-waste systems. Speciation in aqueous solution is an integral part of these calculations. EQ6 computes models of titration processes (including fluid mixing), irreversible reaction in closed systems, irreversible reaction in some simple kinds of open systems, and heating or cooling processes, as well as solve ''single-point'' thermodynamic equilibrium problems. A reaction path calculation normally involves a sequence of thermodynamic equilibrium calculations. Chemical evolution is driven by a set of irreversible reactions (i.e., reactions out of equilibrium) and/or changes in temperature and/or pressure. These irreversible reactions usually represent the dissolution or precipitation of minerals or other solids. The code computes the appearance and disappearance of phases in solubility equilibrium with the water. It finds the identities of these phases automatically. The user may specify which potential phases are allowed to form and which are not. There is an option to fix the fugacities of specified gas species, simulating contact with a large external reservoir. Rate laws for irreversible reactions may be either relative rates or actual rates. If any actual rates are used, the calculation has a time frame. Several forms for actual rate laws are programmed into the code. EQ6 is presently able to model both mineral dissolution and growth kinetics

  14. Enticing Viewers: Sex and Violence in TV Guide Program Advertisements.

    Science.gov (United States)

    Williams, Gilbert A.

    1989-01-01

    Examines advertisements in TV Guide for the years 1980 to 1985 to determine whether the presence of sex and violence in program advertisements affects audiences' viewing habits. Finds that sex and violence are prevalent in the advertisements but that the effect on the ratings is mixed. (RS)

  15. Guide to accelerator physics program SYNCH: VAX version 1987. 2

    Energy Technology Data Exchange (ETDEWEB)

    Parsa, Z.; Courant, E.

    1987-01-01

    This guide is written to accommodate users of Accelerator Physics Data Base BNLDAG::DUAO:(PARSA1). It describes the contents of the on line Accelerator Physics data base DUAO:(PARSA1.SYNCH). SYNCH is a computer program used for the design and analysis of synchrotrons, storage rings and beamlines.

  16. Mathematics Program for Grade 1, De Soto Parish Curriculum Guide.

    Science.gov (United States)

    Elam, Helen; And Others

    A program of mathematics instruction for grade one is provided in this curriculum guide. The teaching goal of each lesson is stated in the Purpose section. Visual aids and manipulative materials useful in developing each lesson are suggested and additional teaching aids are listed. Suggestions for teaching the lessons are separated into three…

  17. Standard guide for use of modeling for passive gamma measurements

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This guide addresses the use of models with passive gamma-ray measurement systems. Mathematical models based on physical principles can be used to assist in calibration of gamma-ray measurement systems and in analysis of measurement data. Some nondestructive assay (NDA) measurement programs involve the assay of a wide variety of item geometries and matrix combinations for which the development of physical standards are not practical. In these situations, modeling may provide a cost-effective means of meeting user’s data quality objectives. 1.2 A scientific knowledge of radiation sources and detectors, calibration procedures, geometry and error analysis is needed for users of this standard. This guide assumes that the user has, at a minimum, a basic understanding of these principles and good NDA practices (see Guide C1592), as defined for an NDA professional in Guide C1490. The user of this standard must have at least a basic understanding of the software used for modeling. Instructions or further train...

  18. Model Checker for Java Programs

    Science.gov (United States)

    Visser, Willem

    2007-01-01

    Java Pathfinder (JPF) is a verification and testing environment for Java that integrates model checking, program analysis, and testing. JPF consists of a custom-made Java Virtual Machine (JVM) that interprets bytecode, combined with a search interface to allow the complete behavior of a Java program to be analyzed, including interleavings of concurrent programs. JPF is implemented in Java, and its architecture is highly modular to support rapid prototyping of new features. JPF is an explicit-state model checker, because it enumerates all visited states and, therefore, suffers from the state-explosion problem inherent in analyzing large programs. It is suited to analyzing programs less than 10kLOC, but has been successfully applied to finding errors in concurrent programs up to 100kLOC. When an error is found, a trace from the initial state to the error is produced to guide the debugging. JPF works at the bytecode level, meaning that all of Java can be model-checked. By default, the software checks for all runtime errors (uncaught exceptions), assertions violations (supports Java s assert), and deadlocks. JPF uses garbage collection and symmetry reductions of the heap during model checking to reduce state-explosion, as well as dynamic partial order reductions to lower the number of interleavings analyzed. JPF is capable of symbolic execution of Java programs, including symbolic execution of complex data such as linked lists and trees. JPF is extensible as it allows for the creation of listeners that can subscribe to events during searches. The creation of dedicated code to be executed in place of regular classes is supported and allows users to easily handle native calls and to improve the efficiency of the analysis.

  19. Modeling EERE Deployment Programs

    Energy Technology Data Exchange (ETDEWEB)

    Cort, Katherine A.; Hostick, Donna J.; Belzer, David B.; Livingston, Olga V.

    2007-11-08

    The purpose of this report is to compile information and conclusions gathered as part of three separate tasks undertaken as part of the overall project, “Modeling EERE Deployment Programs,” sponsored by the Planning, Analysis, and Evaluation office within the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE). The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address improvements to modeling in the near term, and note gaps in knowledge where future research is needed.

  20. User guide for computer program food

    International Nuclear Information System (INIS)

    Baker, D.A.

    1977-02-01

    An interactive code, FOOD, has been written in BASIC for the UNIVAC 1108 to facilitate calculation of internal radiation doses to man from radionuclides in food products. In the dose model, vegetation may be contaminated by either air or irrigation water containing radionuclides. The model considers two mechanisms for radionuclide contamination of vegetation: direct deposition of leaves, and uptake from soil through the root system. The user may select up to 14 food categories with corresponding consumption rates, growing periods, and either irrigation rates or atmospheric deposition rates. These foods include various kinds of produce, grains, and animal products. At present, doses may be calculated for the total body and six internal organs from 186 radionuclides. Dose summaries can be displayed at the local terminal. Further details on percent contribution to dose by nuclide and by food type are available from an auxiliary high-speed printer. This output also includes estimated radionuclide concentrations in soil, plants, and animal products

  1. [Possible actions to guide international cooperation programs].

    Science.gov (United States)

    Beauplet, A

    2006-09-01

    Transfusion is an essential element of health services. French HCO's are thriving to sustain the transfusional system throughout the world, especially to support low income countries. This article evokes several tentative cooperation experiences and proposes to think over conditions which would make it possible for such actions to become more efficient. The author sets out different aspects making the undertaken restructurizing and implemented support successful operations. First is about the definition of responsibilities, supervision and management as dedicated to the public authorities. Second deals with the management of disposable resources, whatever they be of human, equipment or material nature. A third item is devoted to contributions (supports) that may help the implementation of the product itself. The article finally stresses the importance of the action (program) quality assessment and continuous improvement. Further to his reporting on the cooperation methods, the author presents some of the actions undertaken by the Etablissement Français du Sang (National Blood Agency) in the last few years in Afghanistan, Latin America and Africa.

  2. Linear mixed models a practical guide using statistical software

    CERN Document Server

    West, Brady T; Galecki, Andrzej T

    2006-01-01

    Simplifying the often confusing array of software programs for fitting linear mixed models (LMMs), Linear Mixed Models: A Practical Guide Using Statistical Software provides a basic introduction to primary concepts, notation, software implementation, model interpretation, and visualization of clustered and longitudinal data. This easy-to-navigate reference details the use of procedures for fitting LMMs in five popular statistical software packages: SAS, SPSS, Stata, R/S-plus, and HLM. The authors introduce basic theoretical concepts, present a heuristic approach to fitting LMMs based on bo

  3. State Articulated Instructional Objectives Guide for Occupational Education Programs. State Pilot Model for Automotive Mechanics (DCC V-003) and Automotive Mechanics (High School).

    Science.gov (United States)

    North Carolina State Dept. of Community Colleges, Raleigh.

    This articulation instructional objective guide for automotive mechanics contains summary information on fifteen blocks (courses) of instruction. They are introduction to automotive technology; lubrication and vehicle operating maintenance; cooling system maintenance and repair; automobile heater maintenance and repair; braking system maintenance…

  4. Toward Continuous Program Improvement: Using a Logic Model for Professional Development School Program Evaluation

    Science.gov (United States)

    He, Ye; Rohr, Jean; Miller, Samuel D.; Levin, Barbara B.; Mercier, Susan

    2010-01-01

    The purpose of this study was to develop a model for evaluating a professional development school program to enact an evidence-based model for a continuous cycle of program improvement. Guided by the logic model for program evaluation, we developed three survey instruments based on the professional development school standards of the National…

  5. Self-Study and Evaluation Guide/1968 Edition. Section D-2B: Orientation on Mobility Services. (Dog Guide Program Only).

    Science.gov (United States)

    National Accreditation Council for Agencies Serving the Blind and Visually Handicapped, New York, NY.

    This self-study and evaluation guide on orientation and mobility services (dog guide program emphasis) is one of 28 guides designed for organizations undertaking a self-study as part of the process for accreditation from the National Accreditation Council (NAC) for agencies serving the blind and visually handicapped. Provided are lists of…

  6. GEOS-5 Chemistry Transport Model User's Guide

    Science.gov (United States)

    Kouatchou, J.; Molod, A.; Nielsen, J. E.; Auer, B.; Putman, W.; Clune, T.

    2015-01-01

    The Goddard Earth Observing System version 5 (GEOS-5) General Circulation Model (GCM) makes use of the Earth System Modeling Framework (ESMF) to enable model configurations with many functions. One of the options of the GEOS-5 GCM is the GEOS-5 Chemistry Transport Model (GEOS-5 CTM), which is an offline simulation of chemistry and constituent transport driven by a specified meteorology and other model output fields. This document describes the basic components of the GEOS-5 CTM, and is a user's guide on to how to obtain and run simulations on the NCCS Discover platform. In addition, we provide information on how to change the model configuration input files to meet users' needs.

  7. Solid Waste Projection Model: Model user's guide

    International Nuclear Information System (INIS)

    Stiles, D.L.; Crow, V.L.

    1990-08-01

    The Solid Waste Projection Model (SWPM) system is an analytical tool developed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford company (WHC) specifically to address solid waste management issues at the Hanford Central Waste Complex (HCWC). This document, one of six documents supporting the SWPM system, contains a description of the system and instructions for preparing to use SWPM and operating Version 1 of the model. 4 figs., 1 tab

  8. Interactive Rapid Dose Assessment Model (IRDAM): user's guide

    International Nuclear Information System (INIS)

    Poeton, R.W.; Moeller, M.P.; Laughlin, G.J.; Desrosiers, A.E.

    1983-05-01

    As part of the continuing emphasis on emergency preparedness the US Nuclear Regulatory Commission (NRC) sponsored the development of a rapid dose assessment system by Pacific Northwest Laboratory (PNL). This system, the Interactive Rapid Dose Assessment Model (IRDAM) is a micro-computer based program for rapidly assessing the radiological impact of accidents at nuclear power plants. This User's Guide provides instruction in the setup and operation of the equipment necessary to run IRDAM. Instructions are also given on how to load the magnetic disks and access the interactive part of the program. Two other companion volumes to this one provide additional information on IRDAM. Reactor Accident Assessment Methods (NUREG/CR-3012, Volume 2) describes the technical bases for IRDAM including methods, models and assumptions used in calculations. Scenarios for Comparing Dose Assessment Models (NUREG/CR-3012, Volume 3) provides the results of calculations made by IRDAM and other models for specific accident scenarios

  9. Introducing Program Evaluation Models

    Directory of Open Access Journals (Sweden)

    Raluca GÂRBOAN

    2008-02-01

    Full Text Available Programs and project evaluation models can be extremely useful in project planning and management. The aim is to set the right questions as soon as possible in order to see in time and deal with the unwanted program effects, as well as to encourage the positive elements of the project impact. In short, different evaluation models are used in order to minimize losses and maximize the benefits of the interventions upon small or large social groups. This article introduces some of the most recently used evaluation models.

  10. Waste treatability guidance program. User`s guide. Revision 0

    Energy Technology Data Exchange (ETDEWEB)

    Toth, C.

    1995-12-21

    DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatability groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User`s Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan.

  11. Waste treatability guidance program. User's guide. Revision 0

    International Nuclear Information System (INIS)

    Toth, C.

    1995-01-01

    DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatability groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User's Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan

  12. Outdoor Program Models: Placing Cooperative Adventure and Adventure Education Models on the Continuum.

    Science.gov (United States)

    Guthrie, Steven P.

    In two articles on outdoor programming models, Watters distinguished four models on a continuum ranging from the common adventure model, with minimal organizational structure and leadership control, to the guide service model, in which leaders are autocratic and trips are highly structured. Club programs and instructional programs were in between,…

  13. A Review and Critique of "Guiding Questions: Guidelines for Leadership Education Programs"

    Science.gov (United States)

    Sowcik, Matthew

    2012-01-01

    The International Leadership Association's "Guiding Questions: Guidelines for Leadership Education Programs" (Ritch & Mengel, 2009) provides a framework to attend to leadership program development, redesign, evaluation, organized program review, questions concerning academic legitimacy and developing common program benchmarks. This article…

  14. The International Coal Statistics Data Base program maintenance guide

    International Nuclear Information System (INIS)

    1991-06-01

    The International Coal Statistics Data Base (ICSD) is a microcomputer-based system which contains information related to international coal trade. This includes coal production, consumption, imports and exports information. The ICSD is a secondary data base, meaning that information contained therein is derived entirely from other primary sources. It uses dBase III+ and Lotus 1-2-3 to locate, report and display data. The system is used for analysis in preparing the Annual Prospects for World Coal Trade (DOE/EIA-0363) publication. The ICSD system is menu driven and also permits the user who is familiar with dBase and Lotus operations to leave the menu structure to perform independent queries. Documentation for the ICSD consists of three manuals -- the User's Guide, the Operations Manual, and the Program Maintenance Manual. This Program Maintenance Manual provides the information necessary to maintain and update the ICSD system. Two major types of program maintenance documentation are presented in this manual. The first is the source code for the dBase III+ routines and related non-dBase programs used in operating the ICSD. The second is listings of the major component database field structures. A third important consideration for dBase programming, the structure of index files, is presented in the listing of source code for the index maintenance program. 1 fig

  15. Using the Context, Input, Process, and Product Evaluation Model (CIPP) as a Comprehensive Framework to Guide the Planning, Implementation, and Assessment of Service-Learning Programs

    Science.gov (United States)

    Zhang, Guili; Zeller, Nancy; Griffith, Robin; Metcalf, Debbie; Williams, Jennifer; Shea, Christine; Misulis, Katherine

    2011-01-01

    Planning, implementing, and assessing a service-learning project can be a complex task because service-learning projects often involve multiple constituencies and aim to meet both the needs of service providers and community partners. In this article, Stufflebeam's Context, Input, Process, and Product (CIPP) evaluation model is recommended as a…

  16. The art of appropriate evaluation : a guide for highway safety program managers

    Science.gov (United States)

    2008-08-01

    The guide, updated from its original release in 1999, is intended for project managers who will oversee the evaluation of traffic safety programs. It describes the benefits of evaluation and provides an overview of the steps involved. The guide inclu...

  17. Implementing a citizen's DWI reporting program using the Extra Eyes model

    Science.gov (United States)

    2008-09-01

    This manual is a guide for law enforcement agencies and community organizations in creating and implementing a citizens DWI reporting program in their communities modeling the Operation Extra Eyes program. Extra Eyes is a program that engages volu...

  18. Model Program Evaluations. Fact Sheet

    Science.gov (United States)

    Arkansas Safe Schools Initiative Division, 2002

    2002-01-01

    There are probably thousands of programs and courses intended to prevent or reduce violence in this nation's schools. Evaluating these many programs has become a problem or goal in itself. There are now many evaluation programs, with many levels of designations, such as model, promising, best practice, exemplary and noteworthy. "Model program" is…

  19. A users guide to the SIMULATION data assembler program

    International Nuclear Information System (INIS)

    Goodill, D.R.; Tymons, B.J.

    1984-09-01

    SIMULATION is a computer program that has been developed by Central Technical Services, UKAEA, Risley, to provide a method of analysis for any radioactive waste management system. The program models a complete system by taking any number of raw waste streams through any sequence of operations, such as treatment or conditioning, packaging or transport. Results are produced in terms of the quantity of waste in each store and the waste throughput of each process on a year by year basis. (author)

  20. Insider safeguards effectiveness model (ISEM). User's guide

    International Nuclear Information System (INIS)

    Boozer, D.D.; Engi, D.

    1977-11-01

    A comprehensive presentation of the ISEM computer program is provided. ISEM was designed to evaluate the effectiveness of a fixed-site facility safeguards system in coping with the theft, sabotage, or dispersal of radiological material by a single person who has authorized access to the facility. This insider may be aided by a group of insiders who covertly degrade sensor systems. Each ISEM run evaluates safeguards system performance for a particular scenario specified by the user. The dispatching of guards following alarms and their interaction with the insider are explicitly treated by the model

  1. AMEM-ADL Polymer Migration Estimation Model User's Guide

    Science.gov (United States)

    The user's guide of the Arthur D. Little Polymer Migration Estimation Model (AMEM) provides the information on how the model estimates the fraction of a chemical additive that diffuses through polymeric matrices.

  2. Using Built-In Domain-Specific Modeling Support to Guide Model-Based Test Generation

    Directory of Open Access Journals (Sweden)

    Teemu Kanstrén

    2012-02-01

    Full Text Available We present a model-based testing approach to support automated test generation with domain-specific concepts. This includes a language expert who is an expert at building test models and domain experts who are experts in the domain of the system under test. First, we provide a framework to support the language expert in building test models using a full (Java programming language with the help of simple but powerful modeling elements of the framework. Second, based on the model built with this framework, the toolset automatically forms a domain-specific modeling language that can be used to further constrain and guide test generation from these models by a domain expert. This makes it possible to generate a large set of test cases covering the full model, chosen (constrained parts of the model, or manually define specific test cases on top of the model while using concepts familiar to the domain experts.

  3. Drycleaning and Laundering: A Suggested Program Guide. Fashion Industry Series No. 5.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The drycleaning and laundering guide is the last of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. The job-preparatory guide is intended to provide youth and adults with intensive preparation for initial entry employment and also with career advancement opportunities within…

  4. Fashion Merchandising: A Suggested Program Guide. Fashion Industry Series No. 4.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The fashion merchandising guide is the fourth of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. The job-preparatory guide is intended to provide youths and adults with intensive preparation for initial entry employment and also with career advancement opportunities within the…

  5. Textile Design: A Suggested Program Guide. Fashion Industry Series No. 3.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The textile design guide is the third of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. The job-preparatory guide is conceived to provide youth and adults with intensive preparation for initial entry employment and also with career advancement opportunities within specific…

  6. User's guide to the LIRAQ model: an air pollution model for the San Francisco Bay Area

    International Nuclear Information System (INIS)

    MacCracken, M.C.

    1975-01-01

    The Livermore Regional Air Quality (LIRAQ) model comprises a set of computer programs that have been integrated into an easily used tool for the air quality planner. To assemble and modify the necessary data files and to direct model execution, a problem formulation program has been developed that makes possible the setup of a wide variety of studies involving perturbation of the emission inventory, changes to the initial and boundary conditions, and different choices of grid size and problem domain. In addition to describing the types of air quality problems for which the LIRAQ model may be used, this User's Guide provides detailed information on how to set up and conduct model simulations. Also included are descriptions of the formats of input data files so that the LIRAQ model may be applied to regions other than the San Francisco Bay Area

  7. Model Year 2012 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2011-11-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles.

  8. Model Year 2011 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-11-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles.

  9. Model Year 2013 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-12-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles.

  10. Model Year 2017 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-11-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles.

  11. Model Year 2018 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2017-12-07

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles.

  12. The 1991 version of the plume impingement computer program. Volume 2: User's input guide

    Science.gov (United States)

    Bender, Robert L.; Somers, Richard E.; Prendergast, Maurice J.; Clayton, Joseph P.; Smith, Sheldon D.

    1991-01-01

    The Plume Impingement Program (PLIMP) is a computer code used to predict impact pressures, forces, moments, heating rates, and contamination on surfaces due to direct impingement flowfields. Typically, it has been used to analyze the effects of rocket exhaust plumes on nearby structures from ground level to the vacuum of space. The program normally uses flowfields generated by the MOC, RAMP2, SPF/2, or SFPGEN computer programs. It is capable of analyzing gaseous and gas/particle flows. A number of simple subshapes are available to model the surfaces of any structure. The original PLIMP program has been modified many times of the last 20 years. The theoretical bases for the referenced major changes, and additional undocumented changes and enhancements since 1988 are summarized in volume 1 of this report. This volume is the User's Input Guide and should be substituted for all previous guides when running the latest version of the program. This version can operate on VAX and UNIX machines with NCAR graphics ability.

  13. 75 FR 66411 - Small Entity Compliance Guide: Women-Owned Small Business Program

    Science.gov (United States)

    2010-10-28

    ... participation in the WOSB program, and is intended to help small businesses understand the regulation and how it... SMALL BUSINESS ADMINISTRATION Small Entity Compliance Guide: Women-Owned Small Business Program AGENCY: Small Business Administration. ACTION: Notice: Availability of Compliance Guide. SUMMARY: The...

  14. Career Exploration in the Fashion Industry: A Suggested Program Guide. Fashion Industry Series No. 1.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The career exploration guide is the first of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. The series is intended to provide an information source for establishing, expanding, or evaluating secondary and adult vocational instructional programs related to the broad field of…

  15. 77 FR 33253 - Regulatory Guide 8.33, Quality Management Program

    Science.gov (United States)

    2012-06-05

    ... NUCLEAR REGULATORY COMMISSION [NRC-2012-0126] Regulatory Guide 8.33, Quality Management Program... Regulatory Commission (NRC or Commission) is withdrawing Regulatory Guide (RG) 8.33, ``Quality Management... Quality Management Program was deleted from the regulations as part of an overall revision in 2002 of the...

  16. 78 FR 16532 - Certain Products Containing Interactive Program Guide and Parental Controls Technology...

    Science.gov (United States)

    2013-03-15

    ... Interactive Program Guide and Parental Controls Technology; Commission Determination Not To Review an Initial... States after importation of certain products containing interactive program guide and parental controls... confidential versions of the motion to terminate and the settlement agreement. On January 8, 2013, the ALJ...

  17. Nuclear Engine System Simulation (NESS). Version 2.0: Program user's guide

    Science.gov (United States)

    Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman

    1993-01-01

    This Program User's Guide discusses the Nuclear Thermal Propulsion (NTP) engine system design features and capabilities modeled in the Nuclear Engine System Simulation (NESS): Version 2.0 program (referred to as NESS throughout the remainder of this document), as well as its operation. NESS was upgraded to include many new modeling capabilities not available in the original version delivered to NASA LeRC in Dec. 1991, NESS's new features include the following: (1) an improved input format; (2) an advanced solid-core NERVA-type reactor system model (ENABLER 2); (3) a bleed-cycle engine system option; (4) an axial-turbopump design option; (5) an automated pump-out turbopump assembly sizing option; (6) an off-design gas generator engine cycle design option; (7) updated hydrogen properties; (8) an improved output format; and (9) personal computer operation capability. Sample design cases are presented in the user's guide that demonstrate many of the new features associated with this upgraded version of NESS, as well as design modeling features associated with the original version of NESS.

  18. Nuclear Engine System Simulation (NESS). Version 2.0: Program user's guide. Final Report

    International Nuclear Information System (INIS)

    Pelaccio, D.G.; Scheil, C.M.; Petrosky, L.

    1993-03-01

    This Program User's Guide discusses the Nuclear Thermal Propulsion (NTP) engine system design features and capabilities modeled in the Nuclear Engine System Simulation (NESS): Version 2.0 program (referred to as NESS throughout the remainder of this document), as well as its operation. NESS was upgraded to include many new modeling capabilities not available in the original version delivered to NASA LeRC in Dec. 1991, NESS's new features include the following: (1) an improved input format; (2) an advanced solid-core NERVA-type reactor system model (ENABLER 2); (3) a bleed-cycle engine system option; (4) an axial-turbopump design option; (5) an automated pump-out turbopump assembly sizing option; (6) an off-design gas generator engine cycle design option; (7) updated hydrogen properties; (8) an improved output formnd (9) personal computer operation capability. Sample design cases are presented in the user's guide that demonstrate many of the new features associated with this upgraded version of NESS, as well as design modeling features associated with the original version of NESS

  19. Linear mixed models a practical guide using statistical software

    CERN Document Server

    West, Brady T; Galecki, Andrzej T

    2014-01-01

    Highly recommended by JASA, Technometrics, and other journals, the first edition of this bestseller showed how to easily perform complex linear mixed model (LMM) analyses via a variety of software programs. Linear Mixed Models: A Practical Guide Using Statistical Software, Second Edition continues to lead readers step by step through the process of fitting LMMs. This second edition covers additional topics on the application of LMMs that are valuable for data analysts in all fields. It also updates the case studies using the latest versions of the software procedures and provides up-to-date information on the options and features of the software procedures available for fitting LMMs in SAS, SPSS, Stata, R/S-plus, and HLM.New to the Second Edition A new chapter on models with crossed random effects that uses a case study to illustrate software procedures capable of fitting these models Power analysis methods for longitudinal and clustered study designs, including software options for power analyses and suggest...

  20. User’s Guide for the Longitudinal Scalogram Analysis Program

    Science.gov (United States)

    1991-01-01

    Total n = 791. 0 = not passed, I = passed. Items am legal drugs , cannabis, pills, psychedelics , cocaine, and heroin. Asterisks denote longitudinal...ALERT to model stages of drug use involvement in adolescents. This revision of the original Note adds new information about the computation of...necessarily reflect the views of the sponsor or RAND. The program and this manual benefited from insightful comments by RAND colleagues John Uebersax

  1. Using diffusion of innovations theory to guide diabetes management program development: an illustrative example.

    Science.gov (United States)

    De Civita, Mirella; Dasgupta, Kaberi

    2007-09-01

    Optimal management of type 2 diabetes requires achievement of optimal glucose, blood pressure and lipid targets through promotion of prudent diet, regular physical activity and adherence to necessary medication. This may require the development of new programs for the coordination of required multidisciplinary services. Diffusion of innovations theory offers a conceptual framework that may facilitate the implementation of such programs. To illustrate this, we have re-examined the implementation experiences previously reported by the developers of an actual diabetes management pilot program in Montreal, with an eye toward identifying potentially important process factors that could effectively increase adoption and sustainability. Physician participation in the program appeared to be influenced by perceived advantages of participation, compatibility of the program with own perspective and perceived barriers to participation. Organizational features that may have influenced participation included the extent of the program's integration within the existing health care system. A thorough consideration of process factors that impact system and team integration must equally include a focus on ensuring ongoing partnerships among the producers of the model, governments, nongovernmental organizations, private industry, user professionals and patients. This can only be achieved when a knowledge transfer action plan is developed to guide program development, implementation and sustainability.

  2. Parallel community climate model: Description and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Drake, J.B.; Flanery, R.E.; Semeraro, B.D.; Worley, P.H. [and others

    1996-07-15

    This report gives an overview of a parallel version of the NCAR Community Climate Model, CCM2, implemented for MIMD massively parallel computers using a message-passing programming paradigm. The parallel implementation was developed on an Intel iPSC/860 with 128 processors and on the Intel Delta with 512 processors, and the initial target platform for the production version of the code is the Intel Paragon with 2048 processors. Because the implementation uses a standard, portable message-passing libraries, the code has been easily ported to other multiprocessors supporting a message-passing programming paradigm. The parallelization strategy used is to decompose the problem domain into geographical patches and assign each processor the computation associated with a distinct subset of the patches. With this decomposition, the physics calculations involve only grid points and data local to a processor and are performed in parallel. Using parallel algorithms developed for the semi-Lagrangian transport, the fast Fourier transform and the Legendre transform, both physics and dynamics are computed in parallel with minimal data movement and modest change to the original CCM2 source code. Sequential or parallel history tapes are written and input files (in history tape format) are read sequentially by the parallel code to promote compatibility with production use of the model on other computer systems. A validation exercise has been performed with the parallel code and is detailed along with some performance numbers on the Intel Paragon and the IBM SP2. A discussion of reproducibility of results is included. A user`s guide for the PCCM2 version 2.1 on the various parallel machines completes the report. Procedures for compilation, setup and execution are given. A discussion of code internals is included for those who may wish to modify and use the program in their own research.

  3. HYDROCARBON SPILL SCREENING MODEL (HSSM) VOLUME 1: USER'S GUIDE

    Science.gov (United States)

    This users guide describes the Hydrocarbon Spill Screening Model (HSSM). The model is intended for simulation of subsurface releases of light nonaqueous phase liquids (LNAPLs). The model consists of separate modules for LNAPL flow through the vadose zone, spreading in the capil...

  4. Developing robotic behavior using a genetic programming model

    International Nuclear Information System (INIS)

    Pryor, R.J.

    1998-01-01

    This report describes the methodology for using a genetic programming model to develop tracking behaviors for autonomous, microscale robotic vehicles. The use of such vehicles for surveillance and detection operations has become increasingly important in defense and humanitarian applications. Through an evolutionary process similar to that found in nature, the genetic programming model generates a computer program that when downloaded onto a robotic vehicle's on-board computer will guide the robot to successfully accomplish its task. Simulations of multiple robots engaged in problem-solving tasks have demonstrated cooperative behaviors. This report also discusses the behavior model produced by genetic programming and presents some results achieved during the study

  5. Integrated Baseline System (IBS) Version 2.0: Models guide

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Integrated Baseline System (IBS) is an emergency management planning and analysis tool being developed under the direction of the US Army Nuclear and Chemical Agency. This Models Guide summarizes the IBS use of several computer models for predicting the results of emergency situations. These include models for predicting dispersion/doses of airborne contaminants, traffic evacuation, explosion effects, heat radiation from a fire, and siren sound transmission. The guide references additional technical documentation on the models when such documentation is available from other sources. The audience for this manual is chiefly emergency management planners and analysts, but also data managers and system managers.

  6. Gravel roads management : volume 3, gravel roads management : programming guide.

    Science.gov (United States)

    2010-10-01

    This report establishes procedures for managing dirt and gravel roads, with a primary focus on smaller agencies, such as Wyoming counties, that must manage their roads with very limited resources. The report strives, first, to guide and assist smalle...

  7. Application of Survival Analysis and Multistate Modeling to Understand Animal Behavior: Examples from Guide Dogs

    Science.gov (United States)

    Asher, Lucy; Harvey, Naomi D.; Green, Martin; England, Gary C. W.

    2017-01-01

    Epidemiology is the study of patterns of health-related states or events in populations. Statistical models developed for epidemiology could be usefully applied to behavioral states or events. The aim of this study is to present the application of epidemiological statistics to understand animal behavior where discrete outcomes are of interest, using data from guide dogs to illustrate. Specifically, survival analysis and multistate modeling are applied to data on guide dogs comparing dogs that completed training and qualified as a guide dog, to those that were withdrawn from the training program. Survival analysis allows the time to (or between) a binary event(s) and the probability of the event occurring at or beyond a specified time point. Survival analysis, using a Cox proportional hazards model, was used to examine the time taken to withdraw a dog from training. Sex, breed, and other factors affected time to withdrawal. Bitches were withdrawn faster than dogs, Labradors were withdrawn faster, and Labrador × Golden Retrievers slower, than Golden Retriever × Labradors; and dogs not bred by Guide Dogs were withdrawn faster than those bred by Guide Dogs. Multistate modeling (MSM) can be used as an extension of survival analysis to incorporate more than two discrete events or states. Multistate models were used to investigate transitions between states of training to qualification as a guide dog or behavioral withdrawal, and from qualification as a guide dog to behavioral withdrawal. Sex, breed (with purebred Labradors and Golden retrievers differing from F1 crosses), and bred by Guide Dogs or not, effected movements between states. We postulate that survival analysis and MSM could be applied to a wide range of behavioral data and key examples are provided. PMID:28804710

  8. Application of Survival Analysis and Multistate Modeling to Understand Animal Behavior: Examples from Guide Dogs

    Directory of Open Access Journals (Sweden)

    Lucy Asher

    2017-07-01

    Full Text Available Epidemiology is the study of patterns of health-related states or events in populations. Statistical models developed for epidemiology could be usefully applied to behavioral states or events. The aim of this study is to present the application of epidemiological statistics to understand animal behavior where discrete outcomes are of interest, using data from guide dogs to illustrate. Specifically, survival analysis and multistate modeling are applied to data on guide dogs comparing dogs that completed training and qualified as a guide dog, to those that were withdrawn from the training program. Survival analysis allows the time to (or between a binary event(s and the probability of the event occurring at or beyond a specified time point. Survival analysis, using a Cox proportional hazards model, was used to examine the time taken to withdraw a dog from training. Sex, breed, and other factors affected time to withdrawal. Bitches were withdrawn faster than dogs, Labradors were withdrawn faster, and Labrador × Golden Retrievers slower, than Golden Retriever × Labradors; and dogs not bred by Guide Dogs were withdrawn faster than those bred by Guide Dogs. Multistate modeling (MSM can be used as an extension of survival analysis to incorporate more than two discrete events or states. Multistate models were used to investigate transitions between states of training to qualification as a guide dog or behavioral withdrawal, and from qualification as a guide dog to behavioral withdrawal. Sex, breed (with purebred Labradors and Golden retrievers differing from F1 crosses, and bred by Guide Dogs or not, effected movements between states. We postulate that survival analysis and MSM could be applied to a wide range of behavioral data and key examples are provided.

  9. Application of Survival Analysis and Multistate Modeling to Understand Animal Behavior: Examples from Guide Dogs.

    Science.gov (United States)

    Asher, Lucy; Harvey, Naomi D; Green, Martin; England, Gary C W

    2017-01-01

    Epidemiology is the study of patterns of health-related states or events in populations. Statistical models developed for epidemiology could be usefully applied to behavioral states or events. The aim of this study is to present the application of epidemiological statistics to understand animal behavior where discrete outcomes are of interest, using data from guide dogs to illustrate. Specifically, survival analysis and multistate modeling are applied to data on guide dogs comparing dogs that completed training and qualified as a guide dog, to those that were withdrawn from the training program. Survival analysis allows the time to (or between) a binary event(s) and the probability of the event occurring at or beyond a specified time point. Survival analysis, using a Cox proportional hazards model, was used to examine the time taken to withdraw a dog from training. Sex, breed, and other factors affected time to withdrawal. Bitches were withdrawn faster than dogs, Labradors were withdrawn faster, and Labrador × Golden Retrievers slower, than Golden Retriever × Labradors; and dogs not bred by Guide Dogs were withdrawn faster than those bred by Guide Dogs. Multistate modeling (MSM) can be used as an extension of survival analysis to incorporate more than two discrete events or states. Multistate models were used to investigate transitions between states of training to qualification as a guide dog or behavioral withdrawal, and from qualification as a guide dog to behavioral withdrawal. Sex, breed (with purebred Labradors and Golden retrievers differing from F1 crosses), and bred by Guide Dogs or not, effected movements between states. We postulate that survival analysis and MSM could be applied to a wide range of behavioral data and key examples are provided.

  10. Apparel Design and Production: A Suggested Program Guide. Fashion Industry Series No. 2.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The apparel design and production guide is the second of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. Designed to provide youths and adults with intensive preparation for initial entry employment and also with career advancement opportunities within specific categories of jobs,…

  11. User's Guide to Biome Information from the United States International Biological Program (IBP). First Edition.

    Science.gov (United States)

    Hinckley, A. Dexter; Haug, Peter T.

    This publication is a guide to the biome research conducted under the International Biological Program. The guide lists biome researchers by interest and by biome as well as a central list. A site list, map, information sources section reporting abstracts, bibliographies, journals, books, evaluations, and data books are also included. Three…

  12. Collection Development for the School Library Media Program: A Beginner's Guide

    Science.gov (United States)

    Kerby, Mona

    2006-01-01

    A valuable resource for new or experienced school librarians, "Collection Development for the School Library Media Program: A Beginner's Guide" is an easy-to-use guide to collection development. It provides practical and relevant information about collection development issues such as: the school users, policies, selection criteria and sources,…

  13. A Guide for Planning Facilities for Occupational Preparation Programs in Metallurgy Technology. Interim Report. Research 28.

    Science.gov (United States)

    German, Carl, Jr.

    The major purpose of this guide is to elicit the information necessary for writing educational specifications for facilities to house technical education programs in metallurgy. It is organized in these parts: (1) Part I discusses the major purpose, underlying assumptions, recent instructional trends, and guiding principles utilized in the…

  14. Program Analysis as Model Checking

    DEFF Research Database (Denmark)

    Olesen, Mads Chr.

    and abstract interpretation. Model checking views the program as a finite automaton and tries to prove logical properties over the automaton model, or present a counter-example if not possible — with a focus on precision. Abstract interpretation translates the program semantics into abstract semantics...... are considered, among others numerical analysis of c programs, and worst-case execution time analysis of ARM programs. It is shown how lattice automata allow automatic and manual tuning of the precision and efficiency of the verification procedure. In the case of worst-case execution time analysis a sound......Software programs are proliferating throughout modern life, to a point where even the simplest appliances such as lightbulbs contain software, in addition to the software embedded in cars and airplanes. The correct functioning of these programs is therefore of the utmost importance, for the quality...

  15. Downstream fish passage guide walls: A hydraulic scale model analysis

    Science.gov (United States)

    Mulligan, Kevin; Towler, Brett; Haro, Alexander J.; Ahlfeld, David P.

    2018-01-01

    Partial-depth guide walls are used to improve passage efficiency and reduce the delay of out-migrating anadromous fish species by guiding fish to a bypass route (i.e. weir, pipe, sluice gate) that circumvents the turbine intakes, where survival is usually lower. Evaluation and monitoring studies, however, indicate a high propensity for some fish to pass underneath, rather than along, the guide walls, compromising their effectiveness. In the present study we evaluated a range of guide wall structures to identify where/if the flow field shifts from sweeping (i.e. flow direction primarily along the wall and towards the bypass) to downward-dominant. Many migratory fish species, particularly juveniles, are known to drift with the flow and/or exhibit rheotactic behaviour during their migration. When these behaviours are present, fish follow the path of the flow field. Hence, maintaining a strong sweeping velocity in relation to the downward velocity along a guide wall is essential to successful fish guidance. Nine experiments were conducted to measure the three-dimensional velocity components upstream of a scale model guide wall set at a wide range of depths and angles to flow. Results demonstrated how each guide wall configuration affected the three-dimensional velocity components, and hence the downward and sweeping velocity, along the full length of the guide wall. In general, the velocities produced in the scale model were sweeping dominant near the water surface and either downward dominant or close to the transitional depth near the bottom of the guide wall. The primary exception to this shift from sweeping do downward flow was for the minimum guide wall angle tested in this study (15°). At 15° the flow pattern was fully sweeping dominant for every cross-section, indicating that a guide wall with a relatively small angle may be more likely to produce conditions favorable to efficient guidance. A critical next step is to evaluate the behaviour of migratory fish as

  16. Insider's Guide to Graduate Programs in Clinical and Counseling Psychology. 2006/2007 Edition

    Science.gov (United States)

    Mayne, Tracy J.; Norcross, John C.; Sayette, Michael A.

    2006-01-01

    Now in its 2006-2007 edition, this perennial bestseller is the resource students count on for the most current information on applying to doctoral programs in clinical or counseling psychology. The Insider's Guide presents up-to-date facts on 300 accredited programs in the United States and Canada. Each program's profile includes admissions…

  17. An Analysis of the Selection and Training of Guiding Teachers in an Urban Teacher Education Program

    Science.gov (United States)

    Lopez, Carmen Lizette

    2012-01-01

    In response to a growing trend towards alternative teacher education programs, this study aims to direct the focus on traditional teacher preparation programs. The purpose of this study is to analyze the processes of how classroom teachers are selected, trained, and supported as guiding teachers in one urban teacher education program. The…

  18. Model Year 2014 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-12-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

  19. Model Year 2010 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-10-14

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

  20. Model Year 2016 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-11-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

  1. Model Year 2015 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-12-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

  2. Model Year 2005 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2004-11-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

  3. Model Year 2006 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2005-11-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

  4. Model Year 2009 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-10-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

  5. Model Year 2008 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2007-10-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

  6. Model Year 2007 Fuel Economy Guide: EPA Fuel Economy Estimates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2007-10-01

    The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

  7. Dynamic programming models and applications

    CERN Document Server

    Denardo, Eric V

    2003-01-01

    Introduction to sequential decision processes covers use of dynamic programming in studying models of resource allocation, methods for approximating solutions of control problems in continuous time, production control, more. 1982 edition.

  8. The Open Academic Model for the Systems Engineering Graduate Program at Stevens Institute of Technology

    Science.gov (United States)

    Lasfer, Kahina

    2012-01-01

    The Systems Engineering Program at Stevens Institute of Technology has developed the Open Academic Model (OAM) to guide its strategic planning and operations since its founding in 2001. Guided by OAM, the Stevens Systems Engineering Program (SSEP) has grown from inception in 2001 into one of the largest in the US. The main objectives of the…

  9. Modular Engine Noise Component Prediction System (MCP) Program Users' Guide

    Science.gov (United States)

    Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.

    2004-01-01

    This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).

  10. Library Programs for Teens: Mystery Theater. VOYA Guides

    Science.gov (United States)

    Siwak, Karen J.

    2010-01-01

    It's no mystery that fun and exciting programs bring teens into the library. Theater programs provide a venue for teens to express themselves creatively, encourage their participation in library programming, and offer them the opportunity for lively interaction with peers and adults. In "Library Programs for Teens: Mystery Theater," Karen Siwak…

  11. The Development of a National Curriculum Guide for Persian: Themes, Genres, Standards-based Goals, and Models

    Directory of Open Access Journals (Sweden)

    Nicole Mills

    2014-08-01

    Full Text Available Wang (2009 has challenged foreign language scholars to “engage in rigorous discussions to develop language-specific examples and performance indicators to guide program development and decision-making for less commonly taught language (LCTL instructors” (p. 284. The 2011-2012 STARTALK programs in Persian aimed to encourage such rigorous discussion through the development of a National Curriculum Guide in Persian. Persian professionals explored current theories in second language acquisition, examined curricular resources and models, and shared successful teaching materials. This article describes the rationale, procedures, and outcomes of a series of faculty development events that aimed to create a model for curriculum development for the LCTLs and, perhaps, also for other language programs in the context of higher education. The final curriculum guide produced by the program participants includes overarching themes and genres, Standards-based goals, strategies for authentic assessment, and model unit plans.

  12. Users guide for ENVSTD program Version 2. 0 and LTGSTD program Version 2. 0

    Energy Technology Data Exchange (ETDEWEB)

    Crawley, D.B.; Riesen, P.K.; Briggs, R.S.

    1989-02-01

    On January 30, 1989, the US Department of Energy (DOE) promulgated 10 CFR Part 435, Subpart A, an Interim Rule entitled ''Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings.'' As a consequence, federal agencies must design all future federal commercial and multifamily high rise residential buildings in accordance with the Standards, or show that their current standards already meet or exceed the energy-efficiency requirements of the Standards. Although these newly enacted Standards do not regulate the design of nonfederal buildings, DOE recommends that all design professionals use the Standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the Standards were presented in the January 30, 1989, Federal Register in the format typical of commercial standards rather than a federal regulation. As a further help, DOE supported the development of various microcomputer programs to ease the use of the Standards. Two of these programs/emdash/ENVSTD (Version 2.0) and LTGSTD (Version 2.0)/emdash/are detailed in this users guide and provided on the accompanying diskette. This package, developed by Pacific Northwest Laboratory (PNL), is intended to facilitate the designer's use of the Standards dealing specifically with a building's envelope and lighting system designs. Using these programs will greatly simplify the designer's task of performing the sometimes complex calculations needed to determine a design's compliance with the Standards. 3 refs., 6 figs.

  13. Illinois School Bus Driver Instructional Program. Trainee Guide. Revised.

    Science.gov (United States)

    Illinois State Board of Education, Springfield.

    This trainee guide contains six units of materials for use by those studying to become school bus drivers in the State of Illinois. Covered in the units are the following topics: school bus driver role and responsibility, passenger control, first aid, driving fundamentals, accidents and emergencies, and detecting hazards. Each unit contains a…

  14. A ''model'' geophysics program

    International Nuclear Information System (INIS)

    Nyquist, J.E.

    1994-01-01

    In 1993, I tested a radio-controlled airplane designed by Jim Walker of Brigham Young University for low-elevation aerial photography. Model-air photography retains most of the advantages of standard aerial photography --- the photographs can be used to detect lineaments, to map roads and buildings, and to construct stereo pairs to measure topography --- and it is far less expensive. Proven applications on the Oak Ridge Reservation include: updating older aerial records to document new construction; using repeated overflights of the same area to capture seasonal changes in vegetation and the effects of major storms; and detecting waste trench boundaries from the color and character of the overlying grass. Aerial photography is only one of many possible applications of radio-controlled aircraft. Currently, I am funded by the Department of Energy's Office of Technology Development to review the state of the art in microavionics, both military and civilian, to determine ways this emerging technology can be used for environmental site characterization. Being particularly interested in geophysical applications, I am also collaborating with electrical engineers at Oak Ridge National Laboratory to design a model plane that will carry a 3-component flux-gate magnetometer and a global positioning system, which I hope to test in the spring of 1994

  15. Sea ice biogeochemistry: a guide for modellers.

    Directory of Open Access Journals (Sweden)

    Letizia Tedesco

    Full Text Available Sea ice is a fundamental component of the climate system and plays a key role in polar trophic food webs. Nonetheless sea ice biogeochemical dynamics at large temporal and spatial scales are still rarely described. Numerical models may potentially contribute integrating among sparse observations, but available models of sea ice biogeochemistry are still scarce, whether their relevance for properly describing the current and future state of the polar oceans has been recently addressed. A general methodology to develop a sea ice biogeochemical model is presented, deriving it from an existing validated model application by extension of generic pelagic biogeochemistry model parameterizations. The described methodology is flexible and considers different levels of ecosystem complexity and vertical representation, while adopting a strategy of coupling that ensures mass conservation. We show how to apply this methodology step by step by building an intermediate complexity model from a published realistic application and applying it to analyze theoretically a typical season of first-year sea ice in the Arctic, the one currently needing the most urgent understanding. The aim is to (1 introduce sea ice biogeochemistry and address its relevance to ocean modelers of polar regions, supporting them in adding a new sea ice component to their modelling framework for a more adequate representation of the sea ice-covered ocean ecosystem as a whole, and (2 extend our knowledge on the relevant controlling factors of sea ice algal production, showing that beyond the light and nutrient availability, the duration of the sea ice season may play a key-role shaping the algal production during the on going and upcoming projected changes.

  16. A practical guide for operational validation of discrete simulation models

    Directory of Open Access Journals (Sweden)

    Fabiano Leal

    2011-04-01

    Full Text Available As the number of simulation experiments increases, the necessity for validation and verification of these models demands special attention on the part of the simulation practitioners. By analyzing the current scientific literature, it is observed that the operational validation description presented in many papers does not agree on the importance designated to this process and about its applied techniques, subjective or objective. With the expectation of orienting professionals, researchers and students in simulation, this article aims to elaborate a practical guide through the compilation of statistical techniques in the operational validation of discrete simulation models. Finally, the guide's applicability was evaluated by using two study objects, which represent two manufacturing cells, one from the automobile industry and the other from a Brazilian tech company. For each application, the guide identified distinct steps, due to the different aspects that characterize the analyzed distributions

  17. Jobs and Economic Development Impact (JEDI) User Reference Guide: Fast Pyrolysis Biorefinery Model

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yimin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goldberg, Marshall [MRG and Associates, Nevada City, CA (United States)

    2015-02-01

    This guide -- the JEDI Fast Pyrolysis Biorefinery Model User Reference Guide -- was developed to assist users in operating and understanding the JEDI Fast Pyrolysis Biorefinery Model. The guide provides information on the model's underlying methodology, as well as the parameters and data sources used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the JEDI Fast Pyrolysis Biorefinery Model estimates local (e.g., county- or state-level) job creation, earnings, and output from total economic activity for a given fast pyrolysis biorefinery. These estimates include the direct, indirect and induced economic impacts to the local economy associated with the construction and operation phases of biorefinery projects.Local revenue and supply chain impacts as well as induced impacts are estimated using economic multipliers derived from the IMPLAN software program. By determining the local economic impacts and job creation for a proposed biorefinery, the JEDI Fast Pyrolysis Biorefinery Model can be used to field questions about the added value biorefineries might bring to a local community.

  18. Estimating Supplies Program (ESP), Version 1.00, User's Guide

    National Research Council Canada - National Science Library

    Tropeano, Anne

    2000-01-01

    The Estimating Supplies Program (ESP) is an easy to use Windows(TM)-based software program for military medical providers, planners, and trainers that calculates the amount of supplies and equipment required to treat a patient stream...

  19. Building integral projection models: a user's guide.

    Science.gov (United States)

    Rees, Mark; Childs, Dylan Z; Ellner, Stephen P

    2014-05-01

    In order to understand how changes in individual performance (growth, survival or reproduction) influence population dynamics and evolution, ecologists are increasingly using parameterized mathematical models. For continuously structured populations, where some continuous measure of individual state influences growth, survival or reproduction, integral projection models (IPMs) are commonly used. We provide a detailed description of the steps involved in constructing an IPM, explaining how to: (i) translate your study system into an IPM; (ii) implement your IPM; and (iii) diagnose potential problems with your IPM. We emphasize how the study organism's life cycle, and the timing of censuses, together determine the structure of the IPM kernel and important aspects of the statistical analysis used to parameterize an IPM using data on marked individuals. An IPM based on population studies of Soay sheep is used to illustrate the complete process of constructing, implementing and evaluating an IPM fitted to sample data. We then look at very general approaches to parameterizing an IPM, using a wide range of statistical techniques (e.g. maximum likelihood methods, generalized additive models, nonparametric kernel density estimators). Methods for selecting models for parameterizing IPMs are briefly discussed. We conclude with key recommendations and a brief overview of applications that extend the basic model. The online Supporting Information provides commented R code for all our analyses. © 2014 The Authors. Journal of Animal Ecology published by John Wiley & Sons Ltd on behalf of British Ecological Society.

  20. A practical guide to SysML the systems modeling language

    CERN Document Server

    Friendenthal,Sanford; Steiner, Rick

    2009-01-01

    This book is the bestselling, authoritative guide to SysML for systems and software engineers, providing a comprehensive and practical resource for modeling systems with SysML. Fully updated to cover newly released version 1.3, it includes a full description of the modeling language along with a quick reference guide, and shows how an organization or project can transition to model-based systems engineering using SysML, with considerations for processes, methods, tools, and training. Numerous examples help readers understand how SysML can be used in practice, while reference material facilitates studying for the OMG Systems Modeling Professional (OCSMP) Certification Program, designed to test candidates' knowledge of SysML and their ability to use models to represent real-world systems.

  1. Mars Global Reference Atmospheric Model (Mars-GRAM 3.34): Programmer's Guide

    Science.gov (United States)

    Justus, C. G.; James, Bonnie F.; Johnson, Dale L.

    1996-01-01

    This is a programmer's guide for the Mars Global Reference Atmospheric Model (Mars-GRAM 3.34). Included are a brief history and review of the model since its origin in 1988 and a technical discussion of recent additions and modifications. Examples of how to run both the interactive and batch (subroutine) forms are presented. Instructions are provided on how to customize output of the model for various parameters of the Mars atmosphere. Detailed descriptions are given of the main driver programs, subroutines, and associated computational methods. Lists and descriptions include input, output, and local variables in the programs. These descriptions give a summary of program steps and 'map' of calling relationships among the subroutines. Definitions are provided for the variables passed between subroutines through common lists. Explanations are provided for all diagnostic and progress messages generated during execution of the program. A brief outline of future plans for Mars-GRAM is also presented.

  2. Career Preparation Program Curriculum Guide for: Hospitality/Tourism Industry (Tourist Services).

    Science.gov (United States)

    British Columbia Dept. of Education, Victoria. Curriculum Development Branch.

    This career preparation curriculum outline for the hospitality/tourism industry is intended to provide secondary and postsecondary learning outcomes for completion of program requirements. The guide is organized into four sections. Section one presents an overview of the program, of the philosophy of career education, and of the organization and…

  3. Urban Tree Risk Management:A Community Guide to Program Design and Implementation

    Science.gov (United States)

    Jill Pokorny; Joseph O' Brien; Richard Hauer; Gary Johnson; Jana Albers; Peter Bedker; Manfred Mielke

    2003-01-01

    Urban Tree Risk Management: A Community Guide to Program Design and Implementation is a fully illustrated, easy to read training manual written for community leaders, administrators, city foresters, parks and public works staff, and private tree care practitioners. The manual is designed to assist communities design, adopt and implement tree risk management programs,...

  4. The Comer School Development Program. Education Research Consumer Guide, Number 6.

    Science.gov (United States)

    Zimmermann, Jacquelyn, Ed.

    This consumer guide describes what the James Comer School Development Program is, how it got started, and its goals and principles; and presents an evaluation of its success. The program, which was started 25 years ago by a child psychiatrist (James Comer), is designed to improve the educational experience of poor minority youth. It works on the…

  5. Scheduling language and algorithm development study. Volume 2, phase 2: Introduction to plans programming. [user guide

    Science.gov (United States)

    Cochran, D. R.; Ishikawa, M. K.; Paulson, R. E.; Ramsey, H. R.

    1975-01-01

    A user guide for the Programming Language for Allocation and Network Scheduling (PLANS) is presented. Information is included for the construction of PLANS programs. The basic philosophy of PLANS is discussed, and access and update reference techniques are described along with the use of tree structures.

  6. John Tracy Clinic Correspondence Learning Program for Parents of Preschool Deaf-Blind Children. Teacher's Guide.

    Science.gov (United States)

    Thielman, Virginia B.; And Others

    The teacher's guide outlines lessons from a correspondence learning program for parents of preschool deaf blind children. Learning steps and objectives are listed for eight areas covered by the program: communication, gross motor development, fine motor development, eating, sleeping, toilet training, dressing/undressing, and personal hygiene.…

  7. Sensitivity-Based Guided Model Calibration

    Science.gov (United States)

    Semnani, M.; Asadzadeh, M.

    2017-12-01

    A common practice in automatic calibration of hydrologic models is applying the sensitivity analysis prior to the global optimization to reduce the number of decision variables (DVs) by identifying the most sensitive ones. This two-stage process aims to improve the optimization efficiency. However, Parameter sensitivity information can be used to enhance the ability of the optimization algorithms to find good quality solutions in a fewer number of solution evaluations. This improvement can be achieved by increasing the focus of optimization on sampling from the most sensitive parameters in each iteration. In this study, the selection process of the dynamically dimensioned search (DDS) optimization algorithm is enhanced by utilizing a sensitivity analysis method to put more emphasis on the most sensitive decision variables for perturbation. The performance of DDS with the sensitivity information is compared to the original version of DDS for different mathematical test functions and a model calibration case study. Overall, the results show that DDS with sensitivity information finds nearly the same solutions as original DDS, however, in a significantly fewer number of solution evaluations.

  8. Guide for Conducting Benefit-Cost Evaluation of Realized Impacts of Public R&D Programs

    Energy Technology Data Exchange (ETDEWEB)

    Ruegg, Rosalie [TIA Consulting, Inc., Emerald Isle, NC (United States); Jordan, Gretchen B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2011-08-01

    This document provides guidance for evaluators who conduct impact assessments to determine the “realized” economic benefits and costs, energy, environmental benefits, and other impacts of the Office of Energy Efficiency and Renewable Energy’s (EERE) R&D programs. The focus of this Guide is on realized outcomes or impacts of R&D programs actually experienced by American citizens, industry, and others. Retrospective evaluations may be contrasted to prospective evaluations that reflect expected or potential outcomes only if assumptions hold. The retrospective approach described in this Guide is based on realized results only and the extent they can be attributed to the efforts of an R&D program. While it has been prepared specifically to guide retrospective benefit-cost analysis of EERE R&D Programs, this report may be used for similar analysis of other public R&D organizations.

  9. Guide for developing conceptual models for ecological risk assessments

    Energy Technology Data Exchange (ETDEWEB)

    Suter, G.W., II

    1996-05-01

    Ecological conceptual models are the result of the problem formulation phase of an ecological risk assessment, which is an important component of the Remedial Investigation process. They present hypotheses of how the site contaminants might affect the site ecology. The contaminant sources, routes, media, routes, and endpoint receptors are presented in the form of a flow chart. This guide is for preparing the conceptual models; use of this guide will standardize the models so that they will be of high quality, useful to the assessment process, and sufficiently consistent so that connections between sources of exposure and receptors can be extended across operable units (OU). Generic conceptual models are presented for source, aquatic integrator, groundwater integrator, and terrestrial OUs.

  10. Guide for developing conceptual models for ecological risk assessments

    International Nuclear Information System (INIS)

    Suter, G.W., II.

    1996-05-01

    Ecological conceptual models are the result of the problem formulation phase of an ecological risk assessment, which is an important component of the Remedial Investigation process. They present hypotheses of how the site contaminants might affect the site ecology. The contaminant sources, routes, media, routes, and endpoint receptors are presented in the form of a flow chart. This guide is for preparing the conceptual models; use of this guide will standardize the models so that they will be of high quality, useful to the assessment process, and sufficiently consistent so that connections between sources of exposure and receptors can be extended across operable units (OU). Generic conceptual models are presented for source, aquatic integrator, groundwater integrator, and terrestrial OUs

  11. Solid Waste Projection Model: Database User's Guide

    International Nuclear Information System (INIS)

    Blackburn, C.L.

    1993-10-01

    The Solid Waste Projection Model (SWPM) system is an analytical tool developed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford Company (WHC) specifically to address Hanford solid waste management issues. This document is one of a set of documents supporting the SWPM system and providing instructions in the use and maintenance of SWPM components. This manual contains instructions for using Version 1.4 of the SWPM database: system requirements and preparation, entering and maintaining data, and performing routine database functions. This document supports only those operations which are specific to SWPM database menus and functions and does not Provide instruction in the use of Paradox, the database management system in which the SWPM database is established

  12. Macro System Model (MSM) User Guide, Version 1.3

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, M.; Diakov, V.; Sa, T.; Goldsby, M.

    2011-09-01

    This user guide describes the macro system model (MSM). The MSM has been designed to allow users to analyze the financial, environmental, transitional, geographical, and R&D issues associated with the transition to a hydrogen economy. Basic end users can use the MSM to answer cross-cutting questions that were previously difficult to answer in a consistent and timely manner due to various assumptions and methodologies among different models.

  13. Career Education Program for Exceptional Students: An Implementation Guide.

    Science.gov (United States)

    London, Samuel B.; Cole, Jack

    This document provides guidelines for designing, implementing, and evaluating the effectiveness of a district-specific career education program for special education students. Part I lists 10 activities to design, implement, and evaluate a cost-effective career education program. Examples are included of the outcome of each activity. Activities…

  14. Interactive differential equations modeling program

    International Nuclear Information System (INIS)

    Rust, B.W.; Mankin, J.B.

    1976-01-01

    Due to the recent emphasis on mathematical modeling, many ecologists are using mathematics and computers more than ever, and engineers, mathematicians and physical scientists are now included in ecological projects. However, the individual ecologist, with intuitive knowledge of the system, still requires the means to critically examine and adjust system models. An interactive program was developed with the primary goal of allowing an ecologist with minimal experience in either mathematics or computers to develop a system model. It has also been used successfully by systems ecologists, engineers, and mathematicians. This program was written in FORTRAN for the DEC PDP-10, a remote terminal system at Oak Ridge National Laboratory. However, with relatively minor modifications, it can be implemented on any remote terminal system with a FORTRAN IV compiler, or equivalent. This program may be used to simulate any phenomenon which can be described as a system of ordinary differential equations. The program allows the user to interactively change system parameters and/or initial conditions, to interactively select a set of variables to be plotted, and to model discontinuities in the state variables and/or their derivatives. One of the most useful features to the non-computer specialist is the ability to interactively address the system parameters by name and to interactively adjust their values between simulations. These and other features are described in greater detail

  15. Tank waste remediation system privatization infrastructure program requirements and document management process guide

    International Nuclear Information System (INIS)

    ROOT, R.W.

    1999-01-01

    This guide provides the Tank Waste Remediation System Privatization Infrastructure Program management with processes and requirements to appropriately control information and documents in accordance with the Tank Waste Remediation System Configuration Management Plan (Vann 1998b). This includes documents and information created by the program, as well as non-program generated materials submitted to the project. It provides appropriate approval/control, distribution and filing systems

  16. Using Career Pathways to Guide Students through Programs of Study

    Science.gov (United States)

    Bragg, Debra D.; Krismer, Marianne

    2016-01-01

    This chapter describes career pathways that evolved through a Trade Adjustment Assistance Community College and Career Training consortium grant designed to help students complete programs of study and enter health care careers.

  17. Federal Aviation Administration Curriculum Guide for Aviation Magnet Schools Programs

    Science.gov (United States)

    1994-01-01

    Prepared ca. 1994. This publication is designed to provide: : - a brief history of the role of aviation in motivating young : people to learn. : - examples of aviation magnet activities, programs, projects and : school curriculums. : - documentation ...

  18. A Guide for Understanding Health Education and Promotion Programs.

    Science.gov (United States)

    Kim, Richard W; Nahar, Vinayak K

    2018-03-01

    Planning, Implementing & Evaluating Health Promotion Programs: A Primer is a versatile and comprehensive resource on the theoretical and practical underpinnings of successful health promotion programs. The requirements for effective health promotion program development are presented with frequent use of practical planning examples, pedagogical devices, and expert rationale. Ideal for undergraduate and graduate students in health education, promotion, and planning courses, this 15-chapter textbook is organized in a manner that specifically addresses the responsibilities and competencies required of health education specialists as published in the Health Education Specialist Practice Analysis of 2015. The authors of this textbook are leaders in the field and provide readers with the skills necessary to carry out the full process of health promotion program execution, while also offering direct preparation for CHES and MCHES licensing exams.

  19. From Guide to Practice: Improving Your After School Science Program to Increase Student Academic Achievement

    Science.gov (United States)

    Taylor, J.

    2013-12-01

    Numerous science organizations, such as NASA, offer educational outreach activities geared towards after school. For some programs, the primary goal is to grow students' love of science. For others, the programs are also intended to increase academic achievement. For those programs looking to support student learning in out-of-school time environments, aligning the program with learning during the classroom day can be a challenge. The Institute for Education Sciences, What Works Clearinghouse, put together a 'Practice Guide' for maximizing learning time beyond the regular school day. These practice guides provide concrete recommendations for educators supported by research. While this guide is not specific to any content or subject-area, the recommendations provided align very well with science education. After school science is often viewed as a fun, dynamic environment for students. Indeed, one of the recommendations to ensure time is structured according to students' needs is to provide relevant and interesting experiences. Given that our after school programs provide such creative environments for students, what other components are needed to promote increased academic achievement? The recommendations provided to academic achievement, include: 1. Align Instruction, 2. Maximize Attendance and Participation, 3. Adapt Instruction, 4. Provide Engaging Experiences, and 5. Evaluate Program. In this session we will examine these five recommendations presented in the Practice Guide, discuss how these strategies align with science programs, and examine what questions each program should address in order to provide experiences that lend themselves to maximizing instruction. Roadblocks and solutions for overcoming challenges in each of the five areas will be presented. Jessica Taylor will present this research based on her role as an author on the Practice Guide, 'Improving Academic Achievement in Out-of-School Time' and her experience working in various informal science

  20. 78 FR 35642 - Certain TV Programs, Literary Works for TV Production and Episode Guides Pertaining to Same...

    Science.gov (United States)

    2013-06-13

    ... INTERNATIONAL TRADE COMMISSION [Docket No 2959] Certain TV Programs, Literary Works for TV... Certain TV Programs, Literary Works for TV Production and Episode Guides Pertaining to Same, DN 2959; the... importation of certain TV programs, literary works for TV production and episode guides pertaining to same...

  1. Development and Implementation of an Ultrasound-Guided Peripheral Intravenous Catheter Program for Emergency Nurses.

    Science.gov (United States)

    Edwards, Courtney; Jones, Jodi

    2018-01-01

    Emergency medical care often necessitates placement of peripheral intravenous (PIV) catheters. When traditional methods for obtaining PIV access are not successful, ultrasound guidance is a rescue technique for peripheral vascular placement that improves the quality of patient care. The aim of this training program was to develop a process where emergency nurses would be competent to perform ultrasound guided PIV to improve the quality of patient care delivered while reducing throughput time. Administrative program development required creating a nursing practice statement, procedure guideline, operational plan, and competency validation. A training program comprising both didactic and hands-on training was developed and provided by emergency medicine physicians with formal ultrasound fellowship training. In determining whether the training program was adequate in preparing the student to place an ultrasound-guided PIV, 92.9% of students "agreed" or "strongly agreed." In having confidence in their ability to obtain an ultrasound guided PIV catheter placement, 35.7% of respondents "agreed" and 64.3% "strongly agreed." In finding it difficult to be successful in achieving ultrasound guided PIV catheter placement, 71.4% of students "strongly disagreed" and 14.3% "disagreed." All students (100%) felt it was a feasible task to train nurses to successfully place ultrasound-guided PIV catheters and 71.4% of students strongly support continuing to provide this training program and competency validation. Establishment of an effective didactic and hands-on training program resulted in emergency department nurses becoming competent in placement of ultrasound guided PIV catheters to provide optimal patient care. Copyright © 2017 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

  2. A user's guide of a plotting program PLTJOINT

    International Nuclear Information System (INIS)

    Sasaki, Makoto; Sato, Wakaei; Nakagawa, Masayuki; Mori, Takamasa

    1988-02-01

    A plotting program PLTJOINT is able to plot various types of input and output data from neutronics calculations with two dimensional coordinates. These data include cross sections, neutron flux or spectrum, reaction rate distribution and auxiliary data. These are read from the input and output files of the JOINT system and the transport code system using double differential form cross section, and from arbitrary BCD input file. General purpose option is also available. Much care is taken in lettering such as types of characters (italic, Greek letters and characters), super and subscript of alphabet and numeral. Users can design their own characters by using a program IGDRASIL. Most of input data can be read in free format. The code has been programed so flexibly that new functions can be easily added to. (author)

  3. Stochastic linear programming models, theory, and computation

    CERN Document Server

    Kall, Peter

    2011-01-01

    This new edition of Stochastic Linear Programming: Models, Theory and Computation has been brought completely up to date, either dealing with or at least referring to new material on models and methods, including DEA with stochastic outputs modeled via constraints on special risk functions (generalizing chance constraints, ICC’s and CVaR constraints), material on Sharpe-ratio, and Asset Liability Management models involving CVaR in a multi-stage setup. To facilitate use as a text, exercises are included throughout the book, and web access is provided to a student version of the authors’ SLP-IOR software. Additionally, the authors have updated the Guide to Available Software, and they have included newer algorithms and modeling systems for SLP. The book is thus suitable as a text for advanced courses in stochastic optimization, and as a reference to the field. From Reviews of the First Edition: "The book presents a comprehensive study of stochastic linear optimization problems and their applications. … T...

  4. Standard guide for establishing a quality assurance program for analytical chemistry laboratories within the nuclear industry

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This guide covers the establishment of a quality assurance (QA) program for analytical chemistry laboratories within the nuclear industry. Reference to key elements of ANSI/ISO/ASQC Q9001, Quality Systems, provides guidance to the functional aspects of analytical laboratory operation. When implemented as recommended, the practices presented in this guide will provide a comprehensive QA program for the laboratory. The practices are grouped by functions, which constitute the basic elements of a laboratory QA program. 1.2 The essential, basic elements of a laboratory QA program appear in the following order: Section Organization 5 Quality Assurance Program 6 Training and Qualification 7 Procedures 8 Laboratory Records 9 Control of Records 10 Control of Procurement 11 Control of Measuring Equipment and Materials 12 Control of Measurements 13 Deficiencies and Corrective Actions 14

  5. Automated particulate sampler field test model operations guide

    Energy Technology Data Exchange (ETDEWEB)

    Bowyer, S.M.; Miley, H.S.

    1996-10-01

    The Automated Particulate Sampler Field Test Model Operations Guide is a collection of documents which provides a complete picture of the Automated Particulate Sampler (APS) and the Field Test in which it was evaluated. The Pacific Northwest National Laboratory (PNNL) Automated Particulate Sampler was developed for the purpose of radionuclide particulate monitoring for use under the Comprehensive Test Ban Treaty (CTBT). Its design was directed by anticipated requirements of small size, low power consumption, low noise level, fully automatic operation, and most predominantly the sensitivity requirements of the Conference on Disarmament Working Paper 224 (CDWP224). This guide is intended to serve as both a reference document for the APS and to provide detailed instructions on how to operate the sampler. This document provides a complete description of the APS Field Test Model and all the activity related to its evaluation and progression.

  6. A users guide to the radioactive waste inventory program 'DATABASE'

    International Nuclear Information System (INIS)

    Prince, G.A.; Tymons, B.J.

    1984-09-01

    The program computes an inventory of radioactive waste accumulation in a form such that a variety of interrogation, collation and summary functions can be used to access the stored information. Database is designed to be used online, that is the user will communicate with it at a computer terminal, and the program will display the result of each enquiry. It has the potential to automate much of the searching and adding up which was involved in compiling and using waste inventories in the past. (author)

  7. The Guided System Development Framework: Modeling and Verifying Communication Systems

    DEFF Research Database (Denmark)

    Carvalho Quaresma, Jose Nuno; Probst, Christian W.; Nielson, Flemming

    2014-01-01

    . The Guided System Development framework contributes to more secure communication systems by aiding the development of such systems. The framework features a simple modelling language, step-wise refinement from models to implementation, interfaces to security verification tools, and code generation from...... the verified specification. The refinement process carries thus security properties from the model to the implementation. Our approach also supports verification of systems previously developed and deployed. Internally, the reasoning in our framework is based on the Beliefs and Knowledge tool, a verification...

  8. A Guide for Planning Programs in Agricultural Education.

    Science.gov (United States)

    Eichelberger, A. E.; And Others

    The general information necessary for planning a high school program in agricultural educated is provided, based on the following briefly described occupational areas: agricultural production, agricultural supplied/services, agricultural mechanics, agricultural products (processing, inspection, and marketing), agricultural resources (conversation,…

  9. Soft Skills Training: An Annotated Guide to Selected Programs.

    Science.gov (United States)

    Leigh, Wilhelmina A.; Lee, Deitra H.; Lindquist, Malinda A.

    This guidebook presents data from a two-part study that reviewed existing literature on soft work skills, defined soft skills, and determined their importance to employers. The study also identified programs that were teaching those skills. Researchers contacted 90 organizations, asking for detailed written materials about themselves. The 53 that…

  10. Wider Opportunities for Women Nontraditional Work Programs: A Guide.

    Science.gov (United States)

    Wider Opportunities for Women, Inc., Washington, DC.

    Since 1970, Wider Opportunities for Women (WOW), in Washington, D.C., has conducted programs to train and place disadvantaged women in nontraditional jobs. The results have been record-breaking: high placement rates, high job retention rates, good starting salaries, and upward mobility for women who seemed doomed to a life of poverty and…

  11. DSDP5 user guide - software for semidefinite programming.

    Energy Technology Data Exchange (ETDEWEB)

    Benson, S. J.; Ye, Y.; Mathematics and Computer Science

    2006-01-24

    DSDP implements the dual-scaling algorithm for semidefinite programming. The source code of this interior-point solver, written entirely in ANSI C, is freely available. The solver can be used as a subroutine library, as a function within the Matlab environment, or as an executable that reads and writes to files. Initiated in 1997, DSDP has developed into an efficient and robust general-purpose solver for semidefinite programming. Although the solver is written with semidefinite programming in mind, it can also be used for linear programming and other constraint cones. The features of DSDP include the following: a robust algorithm with a convergence proof and polynomially bounded complexity under mild assumptions on the data, primal and dual solutions, feasible solutions when they exist or approximate certificates of infeasibility, initial points that can be feasible or infeasible, relatively low memory requirements for an interior-point method, sparse and low-rank data structures, extensibility that allows applications to customize the solver and improve its performance, a subroutine library that enables it to be linked to larger applications, scalable performance for large problems on parallel architectures, and a well-documented interface and examples of its use. The package has been used in many applications and tested for efficiency, robustness, and ease of use. We welcome and encourage further use under the terms of the license included in the distribution.

  12. Mentoring Former Prisoners: A Guide for Reentry Programs

    Science.gov (United States)

    Fletcher, Renata Cobbs; Sherk, Jerry

    2009-01-01

    Few social programs have attempted to provide high-risk adults--and, particularly, former prisoners--with mentors. And thus there are few resources that offer practical advice and recommendations for mentoring this population, given its distinct needs, assets and challenges. While much remains to be tested and learned, this manual draws on the…

  13. The Impact of Specialized Telephonic Guides on Employee Engagement in Corporate Well-Being Programs.

    Science.gov (United States)

    Boerger, Nicholas L; Barleen, Nathan A; Marzec, Mary L; Moloney, Daniel P; Dobro, Jeff

    2018-02-01

    Employer-sponsored well-being programs have been growing in popularity as a means to control rising health care costs and increase workplace productivity. Engagement by employees is necessary for these programs to achieve their desired effects. Extrinsic motivators in the form of incentives and surcharges are commonly introduced by employer program sponsors to promote meaningful engagement. Although these may be successful in achieving a degree of engagement, individuals benefit by being intrinsically motivated as they modify behaviors and improve short- and long-term well-being. Telephonic guides equipped with motivational interviewing and other behavioral strategies to improve engagement may bridge the gap between extrinsic and intrinsic motivation. The objectives of this study are to determine characteristics associated with employee utilization of these guides when offered and to compare subsequent program engagement rates between utilizers to a propensity score matched group of employees who were not offered the service. The data were retrieved from a well-being program provider's database. The study examined 166,258 employees across 35 employers. It found utilizers were older, proportionally more female, in the manufacturing industry, incented to use the guide service, offered a larger incentive for program participation, had healthier self-reported behaviors, and had a higher perception of their employer's focus on well-being. The study found that guide utilizers were significantly more likely to engage in telephonic coaching, digital coaching, and activity tracking up to 6 months. The study's findings suggest telephonic guides using a range of behavioral techniques are an effective strategy to drive well-being program engagement.

  14. Decay of super-heavy particles: user guide of the SHdecay program

    Science.gov (United States)

    Barbot, C.

    2004-02-01

    I give here a detailed user guide for the C++ program SHdecay, which has been developed for computing the final spectra of stable particles (protons, photons, LSPs, electrons, neutrinos of the three species and their antiparticles) arising from the decay of a super-heavy X particle. It allows to compute in great detail the complete decay cascade for any given decay mode into particles of the Minimal Supersymmetric Standard Model (MSSM). In particular, it takes into account all interactions of the MSSM during the perturbative cascade (including not only QCD, but also the electroweak and 3rd generation Yukawa interactions), and includes a detailed treatment of the SUSY decay cascade (for a given set of parameters) and of the non-perturbative hadronization process. All these features allow us to ensure energy conservation over the whole cascade up to a numerical accuracy of a few per mille. Yet, this program also allows to restrict the computation to QCD or SUSY-QCD frameworks. I detail the input and output files, describe the role of each part of the program, and include some advice for using it best. Program summaryTitle of program: SHdecay Catalogue identifier:ADSL Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADSL Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Computer and operating system: Program tested on PC running Linux KDE and Suse 8.1 Programming language used: C with STL C++ library and using the standard gnu g++ compiler No. lines in distributed program: 14 955 No. of bytes in distributed program, including test data, etc.: 624 487 Distribution format: tar gzip file Keywords: Super-heavy particles, fragmentation functions, DGLAP equations, supersymmetry, MSSM, UHECR Nature of physical problem: Obtaining the energy spectra of the final stable decay products (protons, photons, electrons, the three species of neutrinos and the LSPs) of a decaying super-heavy X particle, within the framework of the Minimal

  15. NASA AVOSS Fast-Time Wake Prediction Models: User's Guide

    Science.gov (United States)

    Ahmad, Nash'at N.; VanValkenburg, Randal L.; Pruis, Matthew

    2014-01-01

    The National Aeronautics and Space Administration (NASA) is developing and testing fast-time wake transport and decay models to safely enhance the capacity of the National Airspace System (NAS). The fast-time wake models are empirical algorithms used for real-time predictions of wake transport and decay based on aircraft parameters and ambient weather conditions. The aircraft dependent parameters include the initial vortex descent velocity and the vortex pair separation distance. The atmospheric initial conditions include vertical profiles of temperature or potential temperature, eddy dissipation rate, and crosswind. The current distribution includes the latest versions of the APA (3.4) and the TDP (2.1) models. This User's Guide provides detailed information on the model inputs, file formats, and the model output. An example of a model run and a brief description of the Memphis 1995 Wake Vortex Dataset is also provided.

  16. Gelatin model for training ultrasound-guided puncture

    Directory of Open Access Journals (Sweden)

    Alexandre Campos Moraes Amato

    2015-09-01

    Full Text Available BACKGROUND: It is indispensable that members of the medical profession receive the technical training needed to enable them to rapidly obtain effective vascular access. Training procedures should be used judiciously to familiarize students with the technique. However, existing models are expensive or ineffective, and models need to be developed that are similar to what will be encountered in real patients.OBJECTIVES: To demonstrate creation and application of a gelatin model for training ultrasound-guided puncture.METHOS: The model was made using a mixture of colorless gelatin and water in a transparent plastic receptacle with two pairs of orifices of different diameters, through which two plastic tubes were inserted, to simulate blood vessels.RESULTS: The model was a close approximation to the real medical procedure in several aspects, since gelatin has a similar consistency to human tissues, providing a more faithful reproduction of the tactile sensation at the moment when the needle reaches the interior of a vessel and its contents are aspirated.CONCLUSIONS: The method proposed here can be used to easily construct a low-cost model using everyday materials that is suitable for large-scale training of ultrasound-guided puncture.

  17. User's guide to SERICPAC: A computer program for calculating electric-utility avoided costs rates

    Energy Technology Data Exchange (ETDEWEB)

    Wirtshafter, R.; Abrash, M.; Koved, M.; Feldman, S.

    1982-05-01

    SERICPAC is a computer program developed to calculate average avoided cost rates for decentralized power producers and cogenerators that sell electricity to electric utilities. SERICPAC works in tandem with SERICOST, a program to calculate avoided costs, and determines the appropriate rates for buying and selling of electricity from electric utilities to qualifying facilities (QF) as stipulated under Section 210 of PURA. SERICPAC contains simulation models for eight technologies including wind, hydro, biogas, and cogeneration. The simulations are converted in a diversified utility production which can be either gross production or net production, which accounts for an internal electricity usage by the QF. The program allows for adjustments to the production to be made for scheduled and forced outages. The final output of the model is a technology-specific average annual rate. The report contains a description of the technologies and the simulations as well as complete user's guide to SERICPAC.

  18. Advancing population ecology with integral projection models: a practical guide

    DEFF Research Database (Denmark)

    Merow, Cory; Dahlgren, Johan; Metcall, C. Jessica E.

    2014-01-01

    Integral Projection Models (IPMs) use information on how an individual's state influences its vital rates - survival, growth and reproduction - to make population projections. IPMs are constructed from regression models predicting vital rates from state variables (e.g., size or age) and covariates...... a comprehensive guide, with extensive R code, for their construction. IPMs can be applied to any stage-structured population; here we illustrate IPMs for a series of plant life histories of increasing complexity and biological realism, highlighting the utility of various regression methods for capturing...

  19. Guide to energy R and D programs for universities and other research groups

    International Nuclear Information System (INIS)

    1984-06-01

    The purpose of this guide to provide researchers in universities and other research institutions with summary-level information on the various research and development programs supported by the Department. Collectively, DOE programs support a wide range of research activities - from studies on the fundamental nature of matter and energy to exploratory and advanced research on the development of new technical approaches leading to new energy technologies. The guide summarizes, in one source, basic information on DOE's energy research and development and related programs, interests and needs. It supplies information on current Federal and DOE grant and contract policies and procedures and lists the names of DOE staff, by program area, from whom additional information may be obtained

  20. Integrated Baseline Bystem (IBS) Version 1.03: Models guide

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-01

    The Integrated Baseline System)(IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planning and analysis. This document is the models guide for the IBS and explains how to use the emergency related computer models. This document provides information for the experienced system user, and is the primary reference for the computer modeling software supplied with the system. It is designed for emergency managers and planners, and others familiar with the concepts of computer modeling. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other IBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary.

  1. Career Mobility: A Guide for Program Planning in Health Occupations; and Career Mobility Profiles.

    Science.gov (United States)

    American Hospital Association, Chicago, IL.

    One means of dealing with manpower problems is to develop career mobility programs which give employees the opportunity to advance, in terms of responsibility and income, to jobs where there are manpower shortages. The material developed in this publication is designed to guide health care institutions, educational institutions, and other…

  2. A Practitioner's Guide: Strategies, Programs, and Resources for Youth Employability Development. Revised Edition.

    Science.gov (United States)

    Smith, Thomas J.; And Others

    This guide to youth unemployment problems is based on the belief that a comprehensive system of program initiatives offers the best solutions. The principal focus is on vocationally at-risk youth. The first chapter defines and describes the target group, and outlines needs and appropriate responses. The second section describes the following eight…

  3. The Golden Age of Radio and Television Programming: A Guide to Reference Sources.

    Science.gov (United States)

    Block, Eleanor S.

    1993-01-01

    Describes reference works that are devoted to the content, background, criticism, history, and scheduling of U.S. television and radio programs from the beginnings of broadcasting through 1960. Works are divided into six categories: general encyclopedias, specific genres, chronology, catalogs and archives, criticism, and "TV Guide." (42…

  4. Natural Resources Technologies: A Suggested Post High School Program Development Guide.

    Science.gov (United States)

    Soles, Robert L.

    This post high school program development guide considers the following natural resources technological areas: air pollution control, forest, rangeland, minerals and mineral fuels, geological, outdoor recreation, soil, urban-regional planning, landscape, water, wastewater, oceanography, wildlife, fish, and marine life. Within each area, the…

  5. Urban Stormwater Runoff. Instructor Guide. Working for Clean Water: An Information Program for Advisory Groups.

    Science.gov (United States)

    Simko, Robert A.

    Urban stormwater runoff collects pollutants from many parts of a city and is an important consideration in water quality planning. Presented is an instructor's guide for a learning session covering various aspects of urban runoff including pollutant sources, management practices, and regulatory programs. Intended for citizen advisory groups, this…

  6. Woodworking Guide for Visually Handicapped Students. A Five County Vocational Skills Training Program for the Blind.

    Science.gov (United States)

    Gaver, Wayne

    Presented is an industrial arts curriculum guide for woodworking which developed out of a 3 year program designed to meet the unmet vocational education needs of visually impaired students enrolled in junior high, secondary, and community colleges in a five county region of California, and to provide inservice training to regular vocational…

  7. Guide to accelerator physics program SYNCH: VAX version 1987.2

    International Nuclear Information System (INIS)

    Parsa, Z.; Courant, E.

    1987-01-01

    This guide is written to accommodate users of Accelerator Physics Data Base BNLDAG::DUAO:[PARSA1]. It describes the contents of the on line Accelerator Physics data base DUAO:[PARSA1.SYNCH]. SYNCH is a computer program used for the design and analysis of synchrotrons, storage rings and beamlines

  8. Enhanced Semantic TV-Show Representation for Personalized Electronic Program Guides

    NARCIS (Netherlands)

    Musto, C.; Narducci, F.; Lops, P.; Semeraro, G.; Gemmis, M. de; Barbieri, M.; Korst, J.H.M.; Pronk, S.P.P.; Clout, R.A.W.

    2012-01-01

    Personalized electronic program guides help users overcome information overload in the TV and video domain by exploiting recommender systems that automatically compile lists of novel and diverse video assets, based on implicitly or explicitly defined user preferences. Inthis context, we assume that

  9. 78 FR 37570 - Certain Products Containing Interactive Program Guide and Parental Control Technology; Notice of...

    Science.gov (United States)

    2013-06-21

    ... Interactive Program Guide and Parental Control Technology; Notice of Request for Statements on the Public... Bonding in the above-captioned investigation. The ALJ found no violation in this investigation, however... exclude the articles concerned from the United States: unless, after considering the effect of such...

  10. Audit Guide: Audits of Federal Student Financial Assistance Programs at Participating Institutions and Institution Servicers.

    Science.gov (United States)

    Office of Inspector General (ED), Washington, DC.

    All institutions participating in the Federal Student Financial Assistance Programs must have an annual financial aid compliance audit performed by an independent auditor. This guide is effective for fiscal years ending December 31, 1999, and thereafter, for institutions preparing for their yearly audit. The purpose of the document is to assist…

  11. User's guide to the Sandia Mathematical Program Library at Livermore

    Energy Technology Data Exchange (ETDEWEB)

    Huddleston, R.E.; Jefferson, T.H.

    1976-03-01

    The Sandia Mathematical Program Library is a collection of general-purpose mathematical subroutines which are maintained within Sandia on a quick service basis. This document is intended to be a reference guide for using the library at Sandia Laboratories, Livermore. (auth)

  12. What We Know about Guided Pathways: Helping Students to Complete Programs Faster. Research Overview

    Science.gov (United States)

    Bailey, Thomas; Jaggars, Shanna Smith; Jenkins, Davis

    2015-01-01

    The idea behind guided pathways is straightforward. College students are more likely to complete a degree in a timely fashion if they choose a program and develop an academic plan early on, have a clear road map of the courses they need to take to complete a credential, and receive guidance and support to help them stay on plan. However, most…

  13. Municipal Wastewater Processes. Instructor Guide. Working for Clean Water: An Information Program for Advisory Groups.

    Science.gov (United States)

    Stoltzfus, Lorna

    Described is a one-hour overview of the unit processes which comprise a municipal wastewater treatment system. Topics covered in this instructor's guide include types of pollutants encountered, treatment methods, and procedures by which wastewater treatment processes are selected. A slide-tape program is available to supplement this component of…

  14. Life Values as an Intrinsic Guide for Cardiopulmonary Rehabilitation Program Engagement: A QUALITATIVE ANALYSIS.

    Science.gov (United States)

    Ellis, Jordan M; Whited, Matthew C; Freeman, John Taylor; Corson, Ansley T; Jameson, John Paul; Greenway, Stacey; Sager, David M; Midgette, Emily P; Varju, Eliza V

    2017-11-08

    Participation in cardiovascular and pulmonary rehabilitation (CVPR) programs can lead to improved functional abilities and improved quality of life, but attendance and adherence to these programs remain suboptimal. Behavioral therapies have emphasized the importance of life value identification as a guide for goal setting and behavior change for both psychological and physical health conditions. Individuals who choose to engage in behaviors that align with their life values are thought to be intrinsically reinforced. The purpose of the following qualitative study was to interview patients enrolled in CVPR about their own life values and motivating factors related to healthy behavior changes. Thirty cardiac or pulmonary patients were recruited from a CVPR program and participated in a semistructured interview about their life values and motivating factors related to program engagement. The data were transcribed and analyzed thematically. Participants identified a wide range of values related to program engagement, and only half of the participants endorsed health as a value. The most frequently endorsed life values included being active, family, and independence. The interviews indicated that, although patients make lifestyle changes in the program to improve their physical health, there are often other values that primarily guide their choice to engage in and maintain lifestyle behaviors. Life values can serve as a powerful guide for individual behavior change. The present study suggests that the piloting of brief values interventions early in CVPR treatment is warranted and has the potential to improve patient outcomes.

  15. OPTIMIZING ANTIMICROBIAL PHARMACODYNAMICS: A GUIDE FOR YOUR STEWARDSHIP PROGRAM

    Directory of Open Access Journals (Sweden)

    Joseph L. Kuti, PharmD

    2016-09-01

    Full Text Available Pharmacodynamic concepts should be applied to optimize antibiotic dosing regimens, particularly in the face of some multidrug resistant bacterial infections. Although the pharmacodynamics of most antibiotic classes used in the hospital setting are well described, guidance on how to select regimens and implement them into an antimicrobial stewardship program in one's institution are more limited. The role of the antibiotic MIC is paramount in understanding which regimens might benefit from implementation as a protocol or use in individual patients. This review article outlines the pharmacodynamics of aminoglycosides, beta-lactams, fluoroquinolones, tigecycline, vancomycin, and polymyxins with the goal of providing a basis for strategy to select an optimized antibiotic regimen in your hospital setting.

  16. Physiological approach to optimal stereographic game programming: a technical guide

    Science.gov (United States)

    Martens, William L.; McRuer, Robert; Childs, C. Timothy; Viirree, Erik

    1996-04-01

    With the advent of mass distribution of consumer VR games comes an imperative to set health and safety standards for the hardware and software used to deliver stereographic content. This is particularly important for game developers who intend to present this stereographic content via head-mounted display (HMD). The visual discomfort that is commonly reported by the user of HMD-based VR games presumably could be kept to a minimum if game developers were provided with standards for the display of stereographic imagery. In this paper, we draw upon both results of research in binocular vision and practical methods from clinical optometry to develop some technical guidelines for programming stereographic games that have the end user's comfort and safety in mind. This paper will provide generate strategies for user- centered implementation of 3D virtual worlds, as well as pictorial examples demonstrating a natural means for rendering stereographic imagery more comfortable to view in games employing first-person perspective.

  17. A guide to Bayesian model selection for ecologists

    Science.gov (United States)

    Hooten, Mevin B.; Hobbs, N.T.

    2015-01-01

    The steady upward trend in the use of model selection and Bayesian methods in ecological research has made it clear that both approaches to inference are important for modern analysis of models and data. However, in teaching Bayesian methods and in working with our research colleagues, we have noticed a general dissatisfaction with the available literature on Bayesian model selection and multimodel inference. Students and researchers new to Bayesian methods quickly find that the published advice on model selection is often preferential in its treatment of options for analysis, frequently advocating one particular method above others. The recent appearance of many articles and textbooks on Bayesian modeling has provided welcome background on relevant approaches to model selection in the Bayesian framework, but most of these are either very narrowly focused in scope or inaccessible to ecologists. Moreover, the methodological details of Bayesian model selection approaches are spread thinly throughout the literature, appearing in journals from many different fields. Our aim with this guide is to condense the large body of literature on Bayesian approaches to model selection and multimodel inference and present it specifically for quantitative ecologists as neutrally as possible. We also bring to light a few important and fundamental concepts relating directly to model selection that seem to have gone unnoticed in the ecological literature. Throughout, we provide only a minimal discussion of philosophy, preferring instead to examine the breadth of approaches as well as their practical advantages and disadvantages. This guide serves as a reference for ecologists using Bayesian methods, so that they can better understand their options and can make an informed choice that is best aligned with their goals for inference.

  18. 78 FR 42106 - Certain TV Programs, Literary Works for TV Production and Episode Guides Pertaining to Same...

    Science.gov (United States)

    2013-07-15

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-886] Certain TV Programs, Literary Works for TV Production and Episode Guides Pertaining to Same; Institution of Investigation Pursuant to 19 U... of certain TV programs, literary works for TV production and episode guides pertaining to same by...

  19. Guide for licensing evaluations using CRAC2: A computer program for calculating reactor accident consequences

    International Nuclear Information System (INIS)

    White, J.E.; Roussin, R.W.; Gilpin, H.

    1988-12-01

    A version of the CRAC2 computer code applicable for use in analyses of consequences and risks of reactor accidents in case work for environmental statements has been implemented for use on the Nuclear Regulatory Commission Data General MV/8000 computer system. Input preparation is facilitated through the use of an interactive computer program which operates on an IBM personal computer. The resulting CRAC2 input deck is transmitted to the MV/8000 by using an error-free file transfer mechanism. To facilitate the use of CRAC2 at NRC, relevant background material on input requirements and model descriptions has been extracted from four reports - ''Calculations of Reactor Accident Consequences,'' Version 2, NUREG/CR-2326 (SAND81-1994) and ''CRAC2 Model Descriptions,'' NUREG/CR-2552 (SAND82-0342), ''CRAC Calculations for Accident Sections of Environmental Statements, '' NUREG/CR-2901 (SAND82-1693), and ''Sensitivity and Uncertainty Studies of the CRAC2 Computer Code,'' NUREG/CR-4038 (ORNL-6114). When this background information is combined with instructions on the input processor, this report provides a self-contained guide for preparing CRAC2 input data with a specific orientation toward applications on the MV/8000. 8 refs., 11 figs., 10 tabs

  20. Conceptual Modeling via Logic Programming

    Science.gov (United States)

    1990-01-01

    CONCEPTUAL MODELING VIA LOGIC PROGRAMaNG 12. PERSONAL AUTHOR(S) John Burge, Bill Noah, Las Smith 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF...interpreter and named it Prolog for middle. He found that his program got into an "Programmation en logique ." It provided the infinite loop unless he used... lA N C I WA v Cruse Mle Submartine 44 0 0 0 0 0835 I 9 33 ICC 33 High F.e cruise Misaile 640 0 8S S44 0 0 High Post cruise missile 840 2 7S 440 too

  1. Hazard screening application guide. Safety Analysis Report Update Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1992-06-01

    The basic purpose of hazard screening is to group precesses, facilities, and proposed modifications according to the magnitude of their hazards so as to determine the need for and extent of follow on safety analysis. A hazard is defined as a material, energy source, or operation that has the potential to cause injury or illness in human beings. The purpose of this document is to give guidance and provide standard methods for performing hazard screening. Hazard screening is applied to new and existing facilities and processes as well as to proposed modifications to existing facilities and processes. The hazard screening process evaluates an identified hazards in terms of the effects on people, both on-site and off-site. The process uses bounding analyses with no credit given for mitigation of an accident with the exception of certain containers meeting DOT specifications. The process is restricted to human safety issues only. Environmental effects are addressed by the environmental program. Interfaces with environmental organizations will be established in order to share information.

  2. Perbandingan antara Keefektifan Model Guided Discovery Learning dan Project-Based Learning pada Matakuliah Geometri

    Directory of Open Access Journals (Sweden)

    Okky Riswandha Imawan

    2015-12-01

    Abstract This research aims to describe the effectiveness and effectiveness differences of the Guided Discovery Learning (GDL Model and the Project Based Learning (PjBL Model in terms of achievement, self-confidence, and critical thinking skills of students on the Solid Geometry subjects. This research was quasi experimental. The research subjects were two undergraduate classes of Mathematics Education Program, Ahmad Dahlan University, in their second semester, established at random. The data analysis to test the effectiveness of the GDL and PjBL Models in terms of each of the dependent variables used the t-test. The data analysis to test differences between effectiveness of the GDL and that of the PjBL Model used the MANOVA test. The results of this research show that viewed from achievement, self confidence, and critical thinking skills of the students are the application of the GDL Model on Solid Geometry subject is effective, the application of the PjBL Model on Solid Geometry subject is effective, and there is no difference in the effectiveness of GDL and PjBL Models on Solid Geometry subject in terms of achievement, self confidence, and critical thinking skills of the students. Keywords: guided discovery learning model, project-based learning model, achievement, self-confidence, critical thinking skills

  3. Neural field model of memory-guided search.

    Science.gov (United States)

    Kilpatrick, Zachary P; Poll, Daniel B

    2017-12-01

    Many organisms can remember locations they have previously visited during a search. Visual search experiments have shown exploration is guided away from these locations, reducing redundancies in the search path before finding a hidden target. We develop and analyze a two-layer neural field model that encodes positional information during a search task. A position-encoding layer sustains a bump attractor corresponding to the searching agent's current location, and search is modeled by velocity input that propagates the bump. A memory layer sustains persistent activity bounded by a wave front, whose edges expand in response to excitatory input from the position layer. Search can then be biased in response to remembered locations, influencing velocity inputs to the position layer. Asymptotic techniques are used to reduce the dynamics of our model to a low-dimensional system of equations that track the bump position and front boundary. Performance is compared for different target-finding tasks.

  4. Neural field model of memory-guided search

    Science.gov (United States)

    Kilpatrick, Zachary P.; Poll, Daniel B.

    2017-12-01

    Many organisms can remember locations they have previously visited during a search. Visual search experiments have shown exploration is guided away from these locations, reducing redundancies in the search path before finding a hidden target. We develop and analyze a two-layer neural field model that encodes positional information during a search task. A position-encoding layer sustains a bump attractor corresponding to the searching agent's current location, and search is modeled by velocity input that propagates the bump. A memory layer sustains persistent activity bounded by a wave front, whose edges expand in response to excitatory input from the position layer. Search can then be biased in response to remembered locations, influencing velocity inputs to the position layer. Asymptotic techniques are used to reduce the dynamics of our model to a low-dimensional system of equations that track the bump position and front boundary. Performance is compared for different target-finding tasks.

  5. Doctor role modelling in medical education: BEME Guide No. 27.

    Science.gov (United States)

    Passi, Vimmi; Johnson, Samantha; Peile, Ed; Wright, Scott; Hafferty, Fred; Johnson, Neil

    2013-09-01

    The aim of this review is to summarise the evidence currently available on role modelling by doctors in medical education. A systematic search of electronic databases was conducted (PubMed, Psyc- Info, Embase, Education Research Complete, Web of Knowledge, ERIC and British Education Index) from January 1990 to February 2012. Data extraction was completed by two independent reviewers and included a quality assessment of each paper. A thematic analysis was conducted on all the included papers. Thirty-nine studies fulfilled the inclusion criteria for the review. Six main themes emerged from the content of high and medium quality papers: 1) the attributes of positive doctor role models; 2) the personality profiles of positive role models; 3) the influence of positive role models on students' career choice; 4) the process of positive role modelling; 5) the influence of negative role modelling; 6) the influence of culture, diversity and gender in the choice of role model. This systematic review highlights role modelling as an important process for the professional development of learners. Excellence in role modelling involves demonstration of high standards of clinical competence, excellence in clinical teaching skills and humanistic personal qualities. Positive role models not only help to shape the professional development of our future physicians, they also influence their career choices. This review has highlighted two main challenges in doctor role modelling: the first challenge lies in our lack of understanding of the complex phenomenon of role modelling. Second, the literature draws attention to negative role modelling and this negative influence requires deeper exploration to identify ways to mitigate adverse effects. This BEME review offers a preliminary guide to future discovery and progress in the area of doctor role modelling.

  6. Evidence in promoting positive parenting through the Program-Guide to Develop Emotional Competences

    Directory of Open Access Journals (Sweden)

    Raquel-Amaya Martínez-González

    2016-07-01

    Full Text Available This study aims at providing evidence of the effectiveness of the Program-Guide to Develop Emotional Competences in promoting positive parenting. Contextual, institutional, methodological and professional issues were taken into account to develop a social innovation experience to support parenting as a preventive measure to family conflicts. The study describes both the contents of the Program-Guide and the methodological and evaluation issues that trained professionals need to consider when delivering the Program-Guide to families in natural contexts. Information was gathered and analyzed from 259 parents with children of ages 1-18 who participated in 26 parent training groups. A pre- and post-test design showed that after finishing the sessions parents perceived themselves more competent as parents according to the five dimensions of parenting competences considered: (1 emotional self-regulation abilities; (2 self-esteem and assertiveness; (3 communication strategies; (4 strategies to solve conflicts and to negotiate; and (5 strategies to establish coherent norms, limits and consequences to promote positive discipline. The study presents a discussion on these results from evidence-based parenting programs, as well as some strengths and limitations of the study, together with some suggestions for further research.

  7. Modelling Organizational Preservation Goals to Guide Digital Preservation

    Directory of Open Access Journals (Sweden)

    Angela Dappert

    2009-10-01

    Full Text Available This paper is an extended and updated version of the work reported at iPres 2008. Digital preservation activities can only succeed if they go beyond the technical properties of digital objects. They must consider the strategy, policy, goals, and constraints of the institution that undertakes them and take into account the cultural and institutional framework in which data, documents and records are preserved. Furthermore, because organizations differ in many ways, a one-size-fits-all approach cannot be appropriate. Fortunately, organizations involved in digital preservation have created documents describing their policies, strategies, work-flows, plans, and goals to provide guidance. They also have skilled staff who are aware of sometimes unwritten considerations. Within Planets (Farquhar & Hockx-Yu, 2007, a four-year project co-funded by the European Union to address core digital preservation challenges, we have analyzed preservation guiding documents and interviewed staff from libraries, archives, and data centres that are actively engaged in digital preservation. This paper introduces a conceptual model for expressing the core concepts and requirements that appear in preservation guiding documents. It defines a specific vocabulary that institutions can reuse for expressing their own policies and strategies. In addition to providing a conceptual framework, the model and vocabulary support automated preservation planning tools through an XML representation.

  8. Manufacturing Cost Levelization Model – A User’s Guide

    Energy Technology Data Exchange (ETDEWEB)

    Morrow, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shehabi, Arman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Smith, Sarah Josephine [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-08-01

    The Manufacturing Cost Levelization Model is a cost-performance techno-economic model that estimates total large-scale manufacturing costs for necessary to produce a given product. It is designed to provide production cost estimates for technology researchers to help guide technology research and development towards an eventual cost-effective product. The model presented in this user’s guide is generic and can be tailored to the manufacturing of any product, including the generation of electricity (as a product). This flexibility, however, requires the user to develop the processes and process efficiencies that represents a full-scale manufacturing facility. The generic model is comprised of several modules that estimate variable costs (material, labor, and operating), fixed costs (capital & maintenance), financing structures (debt and equity financing), and tax implications (taxable income after equipment and building depreciation, debt interest payments, and expenses) of a notional manufacturing plant. A cash-flow method is used to estimate a selling price necessary for the manufacturing plant to recover its total cost of production. A levelized unit sales price ($ per unit of product) is determined by dividing the net-present value of the manufacturing plant’s expenses ($) by the net present value of its product output. A user defined production schedule drives the cash-flow method that determines the levelized unit price. In addition, an analyst can increase the levelized unit price to include a gross profit margin to estimate a product sales price. This model allows an analyst to understand the effect that any input variables could have on the cost of manufacturing a product. In addition, the tool is able to perform sensitivity analysis, which can be used to identify the key variables and assumptions that have the greatest influence on the levelized costs. This component is intended to help technology researchers focus their research attention on tasks

  9. User`s Guide for the NREL Force and Loads Analysis Program. Version 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A D

    1992-08-01

    The following report gives the reader an overview of and instructions on the proper use of the National Renewable Energy Laboratory Force and Loads Analysis Program (FLAP, version 2.2). It is intended as a tool for prediction of rotor and blade loads and response for two- or three-bladed rigid hub wind turbines. The effects of turbulence are accounted for. The objectives of the report are to give an overview of the code and also show the methods of data input and correct code execution steps in order to model an example two-bladed rigid hub turbine. A large portion of the discussion (Sections 6.0, 7.0, and 8.0) is devoted to the subject of inputting and running the code for wind turbulence effects. The ability to include turbulent wind effects is perhaps the biggest change in the code since the release of FLAP version 2.01 in 1988. This report is intended to be a user`s guide. It does not contain a theoretical discussion on equations of motion, assumptions, underlying theory, etc. It is intended to be used in conjunction with Wright, Buhl, and Thresher (1988).

  10. VISION User Guide - VISION (Verifiable Fuel Cycle Simulation) Model

    Energy Technology Data Exchange (ETDEWEB)

    Jacob J. Jacobson; Robert F. Jeffers; Gretchen E. Matthern; Steven J. Piet; Benjamin A. Baker; Joseph Grimm

    2009-08-01

    The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R&D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating “what if” scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level for U.S. nuclear power. The model is not intended as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., “reactor types” not individual reactors and “separation types” not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation of disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. Note that recovered uranium is itself often partitioned: some RU flows with recycled transuranic elements, some flows with wastes, and the rest is designated RU. RU comes out of storage if needed to correct the U/TRU ratio in new recycled fuel. Neither RU nor DU are designated as wastes. VISION is comprised of several

  11. VISION User Guide - VISION (Verifiable Fuel Cycle Simulation) Model

    International Nuclear Information System (INIS)

    Jacobson, Jacob J.; Jeffers, Robert F.; Matthern, Gretchen E.; Piet, Steven J.; Baker, Benjamin A.; Grimm, Joseph

    2009-01-01

    The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R and D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating 'what if' scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level for U.S. nuclear power. The model is not intended as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., 'reactor types' not individual reactors and 'separation types' not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation of disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. Note that recovered uranium is itself often partitioned: some RU flows with recycled transuranic elements, some flows with wastes, and the rest is designated RU. RU comes out of storage if needed to correct the U/TRU ratio in new recycled fuel. Neither RU nor DU are designated as wastes. VISION is comprised of several Microsoft

  12. A guide to numerical modelling in systems biology

    CERN Document Server

    Deuflhard, Peter

    2015-01-01

    This book is intended for students of computational systems biology with only a limited background in mathematics. Typical books on systems biology merely mention algorithmic approaches, but without offering a deeper understanding. On the other hand, mathematical books are typically unreadable for computational biologists. The authors of the present book have worked hard to fill this gap. The result is not a book on systems biology, but on computational methods in systems biology. This book originated from courses taught by the authors at Freie Universität Berlin. The guiding idea of the courses was to convey those mathematical insights that are indispensable for systems biology, teaching the necessary mathematical prerequisites by means of many illustrative examples and without any theorems. The three chapters cover the mathematical modelling of biochemical and physiological processes, numerical simulation of the dynamics of biological networks, and identification of model parameters by means of comparisons...

  13. Autonomous guided vehicles methods and models for optimal path planning

    CERN Document Server

    Fazlollahtabar, Hamed

    2015-01-01

      This book provides readers with extensive information on path planning optimization for both single and multiple Autonomous Guided Vehicles (AGVs), and discusses practical issues involved in advanced industrial applications of AGVs. After discussing previously published research in the field and highlighting the current gaps, it introduces new models developed by the authors with the goal of reducing costs and increasing productivity and effectiveness in the manufacturing industry. The new models address the increasing complexity of manufacturing networks, due for example to the adoption of flexible manufacturing systems that involve automated material handling systems, robots, numerically controlled machine tools, and automated inspection stations, while also considering the uncertainty and stochastic nature of automated equipment such as AGVs. The book discusses and provides solutions to important issues concerning the use of AGVs in the manufacturing industry, including material flow optimization with A...

  14. Interpretation of medical images by model guided analysis

    International Nuclear Information System (INIS)

    Karssemeijer, N.

    1989-01-01

    Progress in the development of digital pictorial information systems stimulates a growing interest in the use of image analysis techniques in medicine. Especially when precise quantitative information is required the use of fast and reproducable computer analysis may be more appropriate than relying on visual judgement only. Such quantitative information can be valuable, for instance, in diagnostics or in irradiation therapy planning. As medical images are mostly recorded in a prescribed way, human anatomy guarantees a common image structure for each particular type of exam. In this thesis it is investigated how to make use of this a priori knowledge to guide image analysis. For that purpose models are developed which are suited to capture common image structure. The first part of this study is devoted to an analysis of nuclear medicine images of myocardial perfusion. In ch. 2 a model of these images is designed in order to represent characteristic image properties. It is shown that for these relatively simple images a compact symbolic description can be achieved, without significant loss of diagnostically importance of several image properties. Possibilities for automatic interpretation of more complex images is investigated in the following chapters. The central topic is segmentation of organs. Two methods are proposed and tested on a set of abdominal X-ray CT scans. Ch. 3 describes a serial approach based on a semantic network and the use of search areas. Relational constraints are used to guide the image processing and to classify detected image segments. In teh ch.'s 4 and 5 a more general parallel approach is utilized, based on a markov random field image model. A stochastic model used to represent prior knowledge about the spatial arrangement of organs is implemented as an external field. (author). 66 refs.; 27 figs.; 6 tabs

  15. Hanford Soil Inventory Model (SIM) Rev. 1 Users Guide

    International Nuclear Information System (INIS)

    Simpson, Brett C.; Corbin, Rob A.; Anderson, Michael J.; Kincaid, Charles T.

    2006-01-01

    The focus of the development and application of a soil inventory model as part of the Remediation and Closure Science (RCS) Project managed by PNNL was to develop a probabilistic approach to estimate comprehensive, mass balanced-based contaminant inventories for the Hanford Site post-closure setting. The outcome of this effort was the Hanford Soil Inventory Model (SIM). This document is a user's guide for the Hanford SIM. The principal project requirement for the SIM was to provide comprehensive quantitative estimates of contaminant inventory and its uncertainty for the various liquid waste sites, unplanned releases, and past tank farm leaks as a function of time and location at Hanford. The majority, but not all of these waste sites are in the 200 Areas of Hanford where chemical processing of spent fuel occurred. A computer model capable of performing these calculations and providing satisfactory quantitative output representing a robust description of contaminant inventory and uncertainty for use in other subsequent models was determined to be satisfactory to address the needs of the RCS Project. The ability to use familiar, commercially available software on high-performance personal computers for data input, modeling, and analysis, rather than custom software on a workstation or mainframe computer for modeling, was desired

  16. Hanford Soil Inventory Model (SIM) Rev. 1 Users Guide

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Brett C.; Corbin, Rob A.; Anderson, Michael J.; Kincaid, Charles T.

    2006-09-25

    The focus of the development and application of a soil inventory model as part of the Remediation and Closure Science (RCS) Project managed by PNNL was to develop a probabilistic approach to estimate comprehensive, mass balanced-based contaminant inventories for the Hanford Site post-closure setting. The outcome of this effort was the Hanford Soil Inventory Model (SIM). This document is a user's guide for the Hanford SIM. The principal project requirement for the SIM was to provide comprehensive quantitative estimates of contaminant inventory and its uncertainty for the various liquid waste sites, unplanned releases, and past tank farm leaks as a function of time and location at Hanford. The majority, but not all of these waste sites are in the 200 Areas of Hanford where chemical processing of spent fuel occurred. A computer model capable of performing these calculations and providing satisfactory quantitative output representing a robust description of contaminant inventory and uncertainty for use in other subsequent models was determined to be satisfactory to address the needs of the RCS Project. The ability to use familiar, commercially available software on high-performance personal computers for data input, modeling, and analysis, rather than custom software on a workstation or mainframe computer for modeling, was desired.

  17. Radon transport modelling: User's guide to RnMod3d

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, C.E

    2000-08-01

    RnMod3d is a numerical computer model of soil-gas and radon transport in porous media. It can be used, for example, to study radon entry from soil into houses in response to indoor-outdoor pressure differences or changes in atmospheric pressure. It can also be used for flux calculations of radon from the soil surface or to model radon exhalation from building materials such as concrete. The finite-volume model is a technical research tool, and it cannot be used meaningfully without good understanding of the involved physical equations. Some understanding of numerical mathematics and the programming language Pascal is also required. Originally, the code was developed for internal use at Risoe only. With this guide, however, it should be possible for others to use the model. Three-dimensional steady-state or transient problems with Darcy flow of soil gas and combined generation, radioactive decay, diffusion and advection of radon can be solved. Moisture is included in the model, and partitioning of radon between air, water and soil grains (adsorption) is taken into account. Most parameters can change in time and space, and transport parameters (diffusivity and permeability) may be anisotropic. This guide includes benchmark tests based on simple problems with known solutions. RnMod3d has also been part of an international model intercomparison exercise based on more complicated problems without known solutions. All tests show that RnMod3d gives results of good quality. (au)

  18. Radon transport modelling: User's guide to RnMod3d

    International Nuclear Information System (INIS)

    Andersen, C.E.

    2000-08-01

    RnMod3d is a numerical computer model of soil-gas and radon transport in porous media. It can be used, for example, to study radon entry from soil into houses in response to indoor-outdoor pressure differences or changes in atmospheric pressure. It can also be used for flux calculations of radon from the soil surface or to model radon exhalation from building materials such as concrete. The finite-volume model is a technical research tool, and it cannot be used meaningfully without good understanding of the involved physical equations. Some understanding of numerical mathematics and the programming language Pascal is also required. Originally, the code was developed for internal use at Risoe only. With this guide, however, it should be possible for others to use the model. Three-dimensional steady-state or transient problems with Darcy flow of soil gas and combined generation, radioactive decay, diffusion and advection of radon can be solved. Moisture is included in the model, and partitioning of radon between air, water and soil grains (adsorption) is taken into account. Most parameters can change in time and space, and transport parameters (diffusivity and permeability) may be anisotropic. This guide includes benchmark tests based on simple problems with known solutions. RnMod3d has also been part of an international model intercomparison exercise based on more complicated problems without known solutions. All tests show that RnMod3d gives results of good quality. (au)

  19. A FORTRAN 77 Program and User's Guide for the Statistical Analyses of Scatterplots to Identify Important Factors in Large-Scale Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Helton, Jon C.; Shortencarier, Maichael J.

    1999-08-01

    A description and user's guide are given for a computer program, PATTRN, developed at Sandia National Laboratories for use in sensitivity analyses of complex models. This program is intended for use in the analysis of input-output relationships in Monte Carlo analyses when the input has been selected using random or Latin hypercube sampling. Procedures incorporated into the program are based upon attempts to detect increasingly complex patterns in scatterplots and involve the detection of linear relationships, monotonic relationships, trends in measures of central tendency, trends in measures of variability, and deviations from randomness. The program was designed to be easy to use and portable.

  20. Head First Programming A learner's guide to programming using the Python language

    CERN Document Server

    Griffiths, David

    2009-01-01

    Looking for a reliable way to learn how to program on your own, without being overwhelmed by confusing concepts? Head First Programming introduces the core concepts of writing computer programs -- variables, decisions, loops, functions, and objects -- which apply regardless of the programming language. This book offers concrete examples and exercises in the dynamic and versatile Python language to demonstrate and reinforce these concepts. Learn the basic tools to start writing the programs that interest you, and get a better understanding of what software can (and cannot) do. When you're fi

  1. A Unified Approach to Modeling and Programming

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann; Møller-Pedersen, Birger

    2010-01-01

    of this paper is to go back to the future and get inspiration from SIMULA and propose a unied approach. In addition to reintroducing the contributions of SIMULA and the Scandinavian approach to object-oriented programming, we do this by discussing a number of issues in modeling and programming and argue3 why we......SIMULA was a language for modeling and programming and provided a unied approach to modeling and programming in contrast to methodologies based on structured analysis and design. The current development seems to be going in the direction of separation of modeling and programming. The goal...

  2. H2A Production Model, Version 2 User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Steward, D.; Ramsden, T.; Zuboy, J.

    2008-09-01

    The H2A Production Model analyzes the technical and economic aspects of central and forecourt hydrogen production technologies. Using a standard discounted cash flow rate of return methodology, it determines the minimum hydrogen selling price, including a specified after-tax internal rate of return from the production technology. Users have the option of accepting default technology input values--such as capital costs, operating costs, and capacity factor--from established H2A production technology cases or entering custom values. Users can also modify the model's financial inputs. This new version of the H2A Production Model features enhanced usability and functionality. Input fields are consolidated and simplified. New capabilities include performing sensitivity analyses and scaling analyses to various plant sizes. This User Guide helps users already familiar with the basic tenets of H2A hydrogen production cost analysis get started using the new version of the model. It introduces the basic elements of the model then describes the function and use of each of its worksheets.

  3. User's guide to HYPOINVERSE-2000, a Fortran program to solve for earthquake locations and magnitudes

    Science.gov (United States)

    Klein, Fred W.

    2002-01-01

    Hypoinverse is a computer program that processes files of seismic station data for an earthquake (like p wave arrival times and seismogram amplitudes and durations) into earthquake locations and magnitudes. It is one of a long line of similar USGS programs including HYPOLAYR (Eaton, 1969), HYPO71 (Lee and Lahr, 1972), and HYPOELLIPSE (Lahr, 1980). If you are new to Hypoinverse, you may want to start by glancing at the section “SOME SIMPLE COMMAND SEQUENCES” to get a feel of some simpler sessions. This document is essentially an advanced user’s guide, and reading it sequentially will probably plow the reader into more detail than he/she needs. Every user must have a crust model, station list and phase data input files, and glancing at these sections is a good place to begin. The program has many options because it has grown over the years to meet the needs of one the largest seismic networks in the world, but small networks with just a few stations do use the program and can ignore most of the options and commands. History and availability. Hypoinverse was originally written for the Eclipse minicomputer in 1978 (Klein, 1978). A revised version for VAX and Pro-350 computers (Klein, 1985) was later expanded to include multiple crustal models and other capabilities (Klein, 1989). This current report documents the expanded Y2000 version and it supercedes the earlier documents. It serves as a detailed user's guide to the current version running on unix and VAX-alpha computers, and to the version supplied with the Earthworm earthquake digitizing system. Fortran-77 source code (Sun and VAX compatible) and copies of this documentation is available via anonymous ftp from computers in Menlo Park. At present, the computer is swave.wr.usgs.gov and the directory is /ftp/pub/outgoing/klein/hyp2000. If you are running Hypoinverse on one of the Menlo Park EHZ or NCSN unix computers, the executable currently is ~klein/hyp2000/hyp2000. New features. The Y2000 version of

  4. Starting a new residency program: a step-by-step guide for institutions, hospitals, and program directors

    Directory of Open Access Journals (Sweden)

    Michelle Barajaz

    2016-08-01

    Full Text Available Although our country faces a looming shortage of doctors, constraints of space, funding, and patient volume in many existing residency programs limit training opportunities for medical graduates. New residency programs need to be created for the expansion of graduate medical education training positions. Partnerships between existing academic institutions and community hospitals with a need for physicians can be a very successful means toward this end. Baylor College of Medicine and The Children's Hospital of San Antonio were affiliated in 2012, and subsequently, we developed and received accreditation for a new categorical pediatric residency program at that site in 2014. We share below a step-by-step guide through the process that includes building of the infrastructure, educational development, accreditation, marketing, and recruitment. It is our hope that the description of this process will help others to spur growth in graduate medical training positions.

  5. Changing community health behaviors: a model for program development and management.

    Science.gov (United States)

    Hargreaves, M R; Laitakari, J K; Huff, F; Rautaharju, P M

    1986-01-01

    A model has been proposed to improve program development and management of behavior change programs with large-scale community impact. It can be applied to epidemiologic problems of which lifestyle is an important component, such as heart disease, adolescent pregnancy, hypertension, weight control, and cancer control and prevention programs. The model combines two previously existing models: one indicating that program development is an ongoing cyclical process which starts with uncertainty yet can progress to institutionalization with suitable testing; and the second model indicating that program management within each developmental cycle progresses through specific phases which can be hampered by plateaus and setbacks. Nine systems are essential for program development and operations: education (philosophy, objectives, and content), communications, reward, intervention, program process, program development, and program evaluation. These systems can be used as a guide to facilitate selection from the many guidelines recommended in the literature, and to ensure coordination of innovative program elements.

  6. A Type Graph Model for Java Programs

    NARCIS (Netherlands)

    Rensink, Arend; Zambon, Eduardo

    2009-01-01

    In this report we present a type graph that models all executable constructs of the Java programming language. Such a model is useful for any graph-based technique that relies on a representation of Java programs as graphs. The model can be regarded as a common representation to which all Java

  7. A Type Graph Model for Java Programs

    NARCIS (Netherlands)

    Rensink, Arend; Zambon, Eduardo; Lee, D.; Lopes, A.; Poetzsch-Heffter, A.

    2009-01-01

    In this work we present a type graph that models all executable constructs of the Java programming language. Such a model is useful for any graph-based technique that relies on a representation of Java programs as graphs. The model can be regarded as a common representation to which all Java syntax

  8. Program Guide for Basic Precision Machining 8754000 (IN48.052300) and Precision Machining MTR0470 (IN48.050300).

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This competency-based program guide provides course content information and procedures for secondary schools, postsecondary vocational schools, and community colleges in Florida that conduct programs in basic precision machining and precision machining. The first section is on legal authority, which applies to all vocational education programs in…

  9. Strawberry Square. Thirty-Three Programs in Music Education for Children in Kindergarten and First Grade. Teacher's Guide.

    Science.gov (United States)

    Brown, Sheila; Griffin, Nancy

    This teacher's guide accompanies a series of television programs in music education for kindergarten and first-grade children. The story line of the programs centers around the revitalization of a once run down neighborhood called Strawberry Square where people had forgotten how to sing, dance, and live joyful lives. The program builds upon the…

  10. The Theory and Practice of Programmed Instruction; A Guide for Teachers.

    Science.gov (United States)

    Pocztar, Jerry

    A historical sketch which traces behavioral theory from Pavlov to Skinner and explains the application of Skinner's theory to teaching begins this introduction to programed instruction. Next, three models of programed courses, Skinner's, Crowder's, and skip-branching, are described. The third section, techniques for elaborating programed courses,…

  11. Educational Program Evaluation Using CIPP Model

    OpenAIRE

    Warju, Warju

    2016-01-01

    There are many models of evaluation that can be used to evaluate a program. However, the most commonly used is the context, input, process, output (CIPP) evaluation models. CIPP evaluation model developed by Stufflebeam and Shinkfield in 1985. The evaluation context is used to give a rational reason a selected program or curriculum to be implemented. A wide scale, context can be evaluated on: the program's objectives, policies that support the vision and mission of the institution, the releva...

  12. Building Program Models Incrementally from Informal Descriptions.

    Science.gov (United States)

    1979-10-01

    AD-AOB6 50 STANFORD UNIV CA DEPT OF COMPUTER SCIENCE F/G 9/2 BUILDING PROGRAM MODELS INCREMENTALLY FROM INFORMAL DESCRIPTION--ETC(U) OCT 79 B P...port SCI.ICS.U.79.2 t Building Program Models Incrementally from Informal Descriptions by Brian P. McCune Research sponsored by Defense Advanced...TYPE OF REPORT & PERIOD COVERED Building Program Models Incrementally from Informal Descriptions. , technical, October 1979 6. PERFORMING ORG

  13. Planning and environment linkages program : a guide to measuring progress in linking transportation planning and environmental analysis

    Science.gov (United States)

    2009-12-01

    Transportation agencies use a variety of metrics to document progress toward achieving specific goals and objectives. This guide, developed by Federal Highway Administration (FHWA) Planning and Environmental Linkages (PEL) program, is intended to hel...

  14. Environmental Restoration Program pollution prevention checklist guide for the feasibility study project phase

    International Nuclear Information System (INIS)

    1993-09-01

    Feasibility studies (FS) determine what remedial alternatives are presented to regulators for site cleanup. A key consideration in this process is the waste to be generated. Minimizing the volume and toxicity of this waste will ultimately contribute to the selection of the best remedial option. The purpose of this checklist guide is to assist the user in incorporating pollution prevention/waste minimization (PP/WM) in all FS phase projects of the Environmental Restoration (ER) Program. This guide will help users document PP/WM activities for technology transfer and reporting requirements. Automated computer screens will be created from the checklist data to assist users with implementing and evaluating waste reduction. Users can then establish numerical performance measures to measure progress in planning, training, self-assessments, field implementation, documentation, and technology transfer. Cost savings result as users train and assess themselves and perform preliminary waste assessments

  15. Understanding groundwater - students' pre-conceptions and conceptual change by means of a theory-guided multimedia learning program

    Science.gov (United States)

    Unterbruner, Ulrike; Hilberg, Sylke; Schiffl, Iris

    2016-06-01

    Education on the subject of groundwater is crucial for sustainability. Nevertheless, international studies with students across different age groups have shown that the basic hydrogeological concept of groundwater defined as water within porous and permeable rocks is not an established everyday notion. Drawing from international research, a multimedia learning program Zwischen Regenwolke und Wasserhahn (between the rain cloud and the tap) was developed, which incorporates specific insights from the fields of conceptual change research, multimedia research, and the model of educational reconstruction. The effectiveness of the learning program was ascertained by means of two studies with Austrian seventh grade pupils as well as teacher-training students from the fields of biology and geography in order to ascertain the effectiveness of the learning program. Using a quasi-experimental research design, the participants' conceptions and knowledge of groundwater were determined in a pre- and post-test. The pupils and students greatly benefitted from working through the learning software independently. Their knowledge of groundwater increased significantly compared to the control group and there was a highly significant increase in the number of scientifically correct notions of groundwater. The acceptance of the program was also generally very high. The results indicate that theory-guided multimedia learning programs can play an important role in the transfer of research results to classroom settings, especially in science education.

  16. User's Guide to the Weighted-Multiple-Linear Regression Program (WREG version 1.0)

    Science.gov (United States)

    Eng, Ken; Chen, Yin-Yu; Kiang, Julie.E.

    2009-01-01

    Streamflow is not measured at every location in a stream network. Yet hydrologists, State and local agencies, and the general public still seek to know streamflow characteristics, such as mean annual flow or flood flows with different exceedance probabilities, at ungaged basins. The goals of this guide are to introduce and familiarize the user with the weighted multiple-linear regression (WREG) program, and to also provide the theoretical background for program features. The program is intended to be used to develop a regional estimation equation for streamflow characteristics that can be applied at an ungaged basin, or to improve the corresponding estimate at continuous-record streamflow gages with short records. The regional estimation equation results from a multiple-linear regression that relates the observable basin characteristics, such as drainage area, to streamflow characteristics.

  17. Standard guide for establishing a quality assurance program for uranium conversion facilities

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2004-01-01

    1.1 This guide provides guidance and recommended practices for establishing a comprehensive quality assurance program for uranium conversion facilities. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use. 1.3 The basic elements of a quality assurance program appear in the following order: FUNCTION SECTION Organization 5 Quality Assurance Program 6 Design Control 7 Instructions, Procedures & Drawings 8 Document Control 9 Procurement 10 Identification and Traceability 11 Processes 12 Inspection 13 Control of Measuring and Test Equipment 14 Handling, Storage and Shipping 15 Inspection, Test and Operating Status 16 Control of Nonconforming Items 17 Corrective Actions 18 Quality Assurance Records 19 Audits 20 TABLE 1 NQA-1 Basic Requirements Relat...

  18. Guide to federal water quality programs and information: A guide with computer software developed by the interagency work group on water quality

    International Nuclear Information System (INIS)

    1993-02-01

    The publication makes key Federal information on water quality available to environmental analysts. The Guide includes information on (1) underlying demographic pressures; (2) the use of land, water, and resources; (3) pollutant loadings; (4) ambient water quality; (5) other effects of water pollution; and (6) a listing of programs established to preserve, protect and restore water quality

  19. Petrogenetic Modeling with a Spreadsheet Program.

    Science.gov (United States)

    Holm, Paul Eric

    1988-01-01

    Describes how interactive programs for scientific modeling may be created by using spreadsheet software such as LOTUS 1-2-3. Lists the advantages of using this method. Discusses fractional distillation, batch partial melting, and combination models as examples. (CW)

  20. Applied Integer Programming Modeling and Solution

    CERN Document Server

    Chen, Der-San; Dang, Yu

    2011-01-01

    An accessible treatment of the modeling and solution of integer programming problems, featuring modern applications and software In order to fully comprehend the algorithms associated with integer programming, it is important to understand not only how algorithms work, but also why they work. Applied Integer Programming features a unique emphasis on this point, focusing on problem modeling and solution using commercial software. Taking an application-oriented approach, this book addresses the art and science of mathematical modeling related to the mixed integer programming (MIP) framework and

  1. Programs to increase high school completion: a community guide systematic health equity review.

    Science.gov (United States)

    Hahn, Robert A; Knopf, John A; Wilson, Sandra Jo; Truman, Benedict I; Milstein, Bobby; Johnson, Robert L; Fielding, Jonathan E; Muntaner, Carles J M; Jones, Camara Phyllis; Fullilove, Mindy T; Moss, Regina Davis; Ueffing, Erin; Hunt, Pete C

    2015-05-01

    High school completion (HSC) is an established predictor of long-term morbidity and mortality. U.S. rates of HSC are substantially lower among students from low-income families and most racial/ethnic minority populations than students from high-income families and the non-Hispanic white population. This systematic review assesses the effectiveness of programs to increase HSC and the potential of these programs to improve lifelong health among at-risk students. A search located a meta-analysis (search period 1985-2010/2011) on the effects of programs to increase HSC or General Educational Development (GED) diploma receipt; the meta-analysis was concordant with Community Guide definitions and methodologic standards. Programs were assessed separately for the general student population (152 studies) and students who were parents or pregnant (15 studies). A search for studies published between 2010 and August 2012 located ten more recent studies, which were assessed for consistency with the meta-analysis. Analyses were conducted in 2013. The review focused on the meta-analysis. Program effectiveness was measured as the increased rate of HSC (or GED receipt) by the intervention group compared with controls. All assessed program types were effective in increasing HSC in the general student population: vocational training, alternative schooling, social-emotional skills training, college-oriented programming, mentoring and counseling, supplemental academic services, school and class restructuring, multiservice packages, attendance monitoring and contingencies, community service, and case management. For students who had children or were pregnant, attendance monitoring and multiservice packages were effective. Ten studies published after the search period for the meta-analysis were consistent with its findings. There is strong evidence that a variety of HSC programs can improve high school or GED completion rates. Because many programs are targeted to high-risk students and

  2. Development of a Program Logic Model and Evaluation Plan for a Participatory Ergonomics Intervention in Construction

    Science.gov (United States)

    Jaegers, Lisa; Dale, Ann Marie; Weaver, Nancy; Buchholz, Bryan; Welch, Laura; Evanoff, Bradley

    2013-01-01

    Background Intervention studies in participatory ergonomics (PE) are often difficult to interpret due to limited descriptions of program planning and evaluation. Methods In an ongoing PE program with floor layers, we developed a logic model to describe our program plan, and process and summative evaluations designed to describe the efficacy of the program. Results The logic model was a useful tool for describing the program elements and subsequent modifications. The process evaluation measured how well the program was delivered as intended, and revealed the need for program modifications. The summative evaluation provided early measures of the efficacy of the program as delivered. Conclusions Inadequate information on program delivery may lead to erroneous conclusions about intervention efficacy due to Type III error. A logic model guided the delivery and evaluation of our intervention and provides useful information to aid interpretation of results. PMID:24006097

  3. Model Checking JAVA Programs Using Java Pathfinder

    Science.gov (United States)

    Havelund, Klaus; Pressburger, Thomas

    2000-01-01

    This paper describes a translator called JAVA PATHFINDER from JAVA to PROMELA, the "programming language" of the SPIN model checker. The purpose is to establish a framework for verification and debugging of JAVA programs based on model checking. This work should be seen in a broader attempt to make formal methods applicable "in the loop" of programming within NASA's areas such as space, aviation, and robotics. Our main goal is to create automated formal methods such that programmers themselves can apply these in their daily work (in the loop) without the need for specialists to manually reformulate a program into a different notation in order to analyze the program. This work is a continuation of an effort to formally verify, using SPIN, a multi-threaded operating system programmed in Lisp for the Deep-Space 1 spacecraft, and of previous work in applying existing model checkers and theorem provers to real applications.

  4. Mental Models and Programming Aptitude

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard; Bennedsen, Jens; Larsen, Kasper Dalgaard

    2007-01-01

    Predicting the success of students participating in introductory programming courses has been an active research area for more than 25 years. Until recently, no variables or tests have had any significant predictive power. However, Dehnadi and Bornat claim to have found a simple test for programm...

  5. User's guide for simulation of waste treatment (SWAT) model

    Energy Technology Data Exchange (ETDEWEB)

    Macal, C.M.

    1979-04-01

    This document is a user's guide for the Simulation of Waste Treatment (SWAT) model computer code. (A detailed description of the logic and assumptions of the model was published previously.) A flow diagram depicting the logic of the SWAT computer code is included. Several river basins or regions can be simulated in a single computer run, with each region having numerous treatment plants. Treatment plants are simulated sequentially to reduce computer storage requirements. All input to the model is in the form of cards and all output is to a line printer. The code is written in FORTRAN IV and consists of approximately 3000 statements. Using the IBM 370/195 under OS, a Gl compiler requires a region of 220K. Execution time is under two minutes for a typical run for a river basin with 23 treatment plants, with each plant having an average of one technology modification over a simulation period of 25 years. In the first section of this report a brief description of the subroutines in the model is given along with an explanation of how the subroutines function in the context of the whole program. The third section indicates formatting for input data; sample input data for a test problem are also presented. Section 4 describes the output resulting from the sample input data. A program listing appears in the appendix.

  6. Programmer's guide to FFE: a fast front-end data-acquisition program

    International Nuclear Information System (INIS)

    Million, D.L.

    1983-05-01

    The Large Coil Test Facility project of the Fusion Energy Division has a data acquisition system which includes a large host computer and several small, peripheral front-end computers. The front-end processors handle details of data acquisition under the control of the host and pass data back to the host for storage. Some of the front ends are known as fast front ends and are required to collect a maximum of 64,000 samples each second. This speed and other hardware constraints resulted in a need for a stand-alone, assembly language task which could be downline loaded from the host system into the fast front ends. FFE (Fast Front End) was written to satisfy this need. It was written in the PDP-11 MACRO-11 assembly language for an LSI-11/23 processor. After the host loads the task into the front end, it controls the data acquisition process with a series of commands and parameters. This Programmer's Guide describes the structure and operation of FFE in detail from a programming point of view. A companion User's guide provides more information on the use of the program from the host system

  7. Una Guia Para Los Tutores del Programa de Alfabetizacion en Espanol (Guide for Spanish Literacy Program Tutors).

    Science.gov (United States)

    Schildgen, Emilia G., Comp.

    Ideas and guidance for literacy program tutors are offered. This guide presents the characteristics of an adult learner, in contrast to a student from elementary or high school, and describes how the relationship between the tutor and the student should be established and maintained. Goals should be set up at the beginning of the program, keeping…

  8. Autism Program Quality Indicators: A Self-Review and Quality Improvement Guide for Schools and Programs Serving Students with Autism Spectrum Disorders.

    Science.gov (United States)

    Crimmins, Daniel B.; Durand, V. Mark; Theurer-Kaufman, Karin; Everett, Jessica

    This publication provides Autism Program Quality Indicators (APQI), intended as a self-review and quality improvement guide for schools and programs serving students with autism spectrum disorders. The APQI were developed by the New York Autism Network at the request of the New York State Education Department. The APQI promote the goal that all…

  9. Object-oriented design and programming with C++ your hands-on guide to C++ programming, with special emphasis on design, testing, and reuse

    CERN Document Server

    Leach, Ronald

    2014-01-01

    Object-Oriented Design and Programming with C++: Your Hands-On Guide to C++ Programming, with Special Emphasis on Design, Testing, and Reuse provides a list of software engineering principles to guide the software development process. This book presents the fundamentals of the C++ language.Organized into two parts encompassing 10 chapters, this book begins with an overview of C++ and describes object-oriented programming and the history of C++. This text then introduces classes, polymorphism, inheritance, and overloading. Other chapters consider the C++ preprocessor and organization of class l

  10. A guide for estimating dynamic panel models: the macroeconomics models specifiness

    International Nuclear Information System (INIS)

    Coletta, Gaetano

    2005-10-01

    The aim of this paper is to review estimators for dynamic panel data models, a topic in which the interest has grown recently. As a consequence 01 this late interest, different estimation techniques have been proposed in the last few years and, given the last development of the subject, there is still a lack 01 a comprehensive guide for panel data applications, and for macroeconomics panel data models in particular. Finally, we also provide some indications about the Stata software commands to estimate dynamic panel data models with the techniques illustrated in the paper [it

  11. Evaluation of a guided continuous quality improvement program in community pharmacies.

    Science.gov (United States)

    Chinthammit, Chanadda; Rupp, Michael T; Armstrong, Edward P; Modisett, Tara; Snead, Rebecca P; Warholak, Terri L

    2017-01-01

    The importance of creating and sustaining a strong culture of patient safety has been recognized as a critical component of safe medication use. This study aims to assess changes in attitudes toward patient safety culture and frequency of quality-related event (QRE) reporting after guided implementation of a continuous quality improvement (CQI) program in a panel of community pharmacies in the United States (U.S.). Twenty-one community pharmacies volunteered to participate in the project and were randomly assigned to intervention or control groups. Pharmacy staff in the intervention group received guided training to ensure full implementation of a CQI program while those in the control group partially implemented the program. Pharmacy staff in both groups completed retrospective pre-post safety culture questionnaires and reported medication errors and near misses that occurred in their practices. Rasch analysis was applied to assess questionnaire validity and reliability and to confirm if the ordinal level data approximated interval level measures. Paired t-tests and repeated measure analysis of covariance tests were subsequently used to compare observed changes in the attitudes of subjects and frequency of QREs reporting in intervention and control groups. Sixty-nine employees completed the questionnaire, a 43.9% response rate. Improvement in attitudes toward patient safety was statistically significant in the intervention group in six domains: staff, training, and skill ( p  = 0.017); patient counseling ( p  = 0.043); communication about mistakes ( p  continuous improvement ( p  < 0.001); and overall patient safety perceptions ( p  = 0.033). No significant differences were observed in QRE reporting rates between intervention and control groups. However, differences were observed in the types of QREs reported (e.g., incorrect safety cap) and the point in the prescription processing workflow where a QRE was detected (e.g., partner check station, and drug

  12. Measurement control program at model facility

    International Nuclear Information System (INIS)

    Schneider, R.A.

    1984-01-01

    A measurement control program for the model plant is described. The discussion includes the technical basis for such a program, the application of measurement control principles to each measurement, and the use of special experiments to estimate measurement error parameters for difficult-to-measure materials. The discussion also describes the statistical aspects of the program, and the documentation procedures used to record, maintain, and process the basic data

  13. User's guide for LTGSTD24 program, Version 2. 4

    Energy Technology Data Exchange (ETDEWEB)

    Hanlon, R.L.; Connell, L.M.

    1993-05-01

    On January 30, 1989, the US Department of Energy (DOE) promulgated an interim rule entitled [open quotes]Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings[close quotes] (10 CFR Part 435, Subpart A). These standards require federal agencies to design all future federal commercial and multifamily high-rise residential buildings in accordance with the standards, or demonstrate that their current requirements already meet or exceed the energy-efficiency requirements of the standards. Although these newly enacted standards do not regulate the design of non-federal buildings, the DOE recommends that all design professionals use the standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the DOE published the standards in the January 30, 1989, Federal Register in the format typical of commercial standards. The Pacific Northwest Laboratory developed several computer programs for the DOE to make it easier for designers to comply with the standards. One of the programs, LTGSTD24 (Version 2.4), is detailed in this user's guide and is provided on the accompanying diskettes. The program will facilitate the designer's use of the standards dealing specifically with building lighting design. Using this program will greatly simplify the designer's task of performing the calculations needed to determine if a design complies with the standards.

  14. Selecting electrode configurations for image-guided cochlear implant programming using template matching.

    Science.gov (United States)

    Zhang, Dongqing; Zhao, Yiyuan; Noble, Jack H; Dawant, Benoit M

    2018-04-01

    Cochlear implants (CIs) are neural prostheses that restore hearing using an electrode array implanted in the cochlea. After implantation, the CI processor is programmed by an audiologist. One factor that negatively impacts outcomes and can be addressed by programming is cross-electrode neural stimulation overlap (NSO). We have proposed a system to assist the audiologist in programming the CI that we call image-guided CI programming (IGCIP). IGCIP permits using CT images to detect NSO and recommend deactivation of a subset of electrodes to avoid NSO. We have shown that IGCIP significantly improves hearing outcomes. Most of the IGCIP steps are robustly automated but electrode configuration selection still sometimes requires manual intervention. With expertise, distance-versus-frequency curves, which are a way to visualize the spatial relationship learned from CT between the electrodes and the nerves they stimulate, can be used to select the electrode configuration. We propose an automated technique for electrode configuration selection. A comparison between this approach and one we have previously proposed shows that our method produces results that are as good as those obtained with our previous method while being generic and requiring fewer parameters.

  15. Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide. Final Report

    International Nuclear Information System (INIS)

    Pelaccio, D.G.; Scheil, C.M.; Petrosky, L.J.

    1993-03-01

    A Nuclear Thermal Propulsion (NTP) engine system design analysis tool is required to support current and future Space Exploration Initiative (SEI) propulsion and vehicle design studies. Currently available NTP engine design models are those developed during the NERVA program in the 1960's and early 1970's and are highly unique to that design or are modifications of current liquid propulsion system design models. To date, NTP engine-based liquid design models lack integrated design of key NTP engine design features in the areas of reactor, shielding, multi-propellant capability, and multi-redundant pump feed fuel systems. Additionally, since the SEI effort is in the initial development stage, a robust, verified NTP analysis design tool could be of great use to the community. This effort developed an NTP engine system design analysis program (tool), known as the Nuclear Engine System Simulation (NESS) program, to support ongoing and future engine system and stage design study efforts. In this effort, Science Applications International Corporation's (SAIC) NTP version of the Expanded Liquid Engine Simulation (ELES) program was modified extensively to include Westinghouse Electric Corporation's near-term solid-core reactor design model. The ELES program has extensive capability to conduct preliminary system design analysis of liquid rocket systems and vehicles. The program is modular in nature and is versatile in terms of modeling state-of-the-art component and system options as discussed. The Westinghouse reactor design model, which was integrated in the NESS program, is based on the near-term solid-core ENABLER NTP reactor design concept. This program is now capable of accurately modeling (characterizing) a complete near-term solid-core NTP engine system in great detail, for a number of design options, in an efficient manner

  16. A user's guide to the programs ITRAP-A, ITRAP-B, ITRAP-S and ITRAP-L

    International Nuclear Information System (INIS)

    Manley, A.J.

    1979-03-01

    The four programs ITRAP-A, ITRAP-B, ITRAP-S and ITRAP-L are designed to calculate parameters required for assessing the performance of iodine trapping plant installed in the ventilation systems of enclosures in which radioactive materials are handled. This guide sets out the input to and output from these programs for plant managers and gives sufficient program details to enable the users to assess the accuracy of the methods used. (author)

  17. User Guide for the International Jobs and Economic Development Impacts Model

    Energy Technology Data Exchange (ETDEWEB)

    Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Uriarte, Caroline [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cox, Sadie [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    The International Jobs and Economic Development Impacts (I-JEDI) model is a freely available economic model that estimates gross economic impacts from wind, solar, and geothermal energy projects for several different countries. Building on the original JEDI model, which was developed for the United States, I-JEDI was developed under the USAID Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program to support countries in assessing economic impacts of LEDS actions in the energy sector. I-JEDI estimates economic impacts by characterizing the construction and operation of energy projects in terms of expenditures and the portion of these expenditures made within the country of analysis. These data are then used in a country-specific input-output (I-O) model to estimate employment, earnings, gross domestic product (GDP), and gross output impacts. Total economic impacts are presented as well as impacts by industry. This user guide presents general information about how to use I-JEDI and interpret results as well as detailed information about methodology and model limitations.

  18. Integer Programming Models for Sales Resource Allocation

    OpenAIRE

    Andris A. Zoltners; Prabhakant Sinha

    1980-01-01

    A practical conceptual framework for sales resource allocation modeling is presented in this paper. A literature review of sales resource allocation models is described in terms of this framework. The conceptual framework also lends itself to several integer programming models which may be used to address the variety of sales resource allocation decisions faced by every sales organization. A general model for sales resource allocation is developed which incorporates multiple sales resources, ...

  19. Environmental restoration program pollution prevention checklist guide for the evaluation of alternatives project phase

    International Nuclear Information System (INIS)

    1993-09-01

    Evaluation of alternative studies determine what decontamination and decommissioning (D ampersand D) alternatives are presented to regulators for facility and site cleanup. A key consideration in this process is the waste to be generated. Minimizing the volume and toxicity of this waste will ultimately contribute to the selection of the best clean-up option. The purpose of this checklist guide is to assist the user with incorporating pollution prevention/waste minimization (PP/WM) in all Evaluation of Alternatives (EV) phase projects of the Environmental Restoration (ER) Program. This guide will assist users with documenting PP/WM activities for technology transfer and reporting requirements. Automated computer screens will be created from the checklist data to help users implement and evaluate waste reduction. Users can then establish numerical performance measures to measure progress in planning, training, self-assessments, field implementation, documentation, and technology transfer. Cost savings result as users train and assess themselves, eliminating expensive process waste assessments and audit teams

  20. Environmental Restoration Program pollution prevention checklist guide for the facility characterization project phase

    International Nuclear Information System (INIS)

    1993-09-01

    A facility characterization (FC) is conducted to determine the nature and extent contamination at a potential hazardous facility waste site. The information gathered during an FC includes (1) data on the volume and chemical nature of the waste, (2) information on the extent of contamination and the migration potential of the contaminants, (3) preliminary information on evaluation of alternative concepts that can or cannot be considered, and (4)supportive technical and cost data. For the purposes of identification, the following operational phases will be used for definition for this phase of the decommissioning and decontamination process (1) facility characterization before clean up, (2) characterization during clean up, (3) characterization of waste materials, and (4) site characterization after clean up. A key consideration in this process is the prevention of any waste to be generated from these characterization activities. The purpose of this checklist guide is to assist users with incorporating pollution prevention/waste minimization (PP/WM) in all FC phase projects of the Environmental Restoration (ER) Program. This guide will help users document PP/WM activities for technology transfer and reporting requirements. Automated computer screens will be created from the checklist data to assist users with implementing and evaluating waste reduction

  1. Ecotourism, sustainable development, and conservation education: Development of a tour guide training program in Tortuguero, Costa Rica

    Science.gov (United States)

    Jacobson, Susan K.; Robles, Rafael

    1992-11-01

    A tour guide training program was developed for rural communities near Costa Rica's Tortuguero National Park to respond to the impacts of the 24-fold increase in park visitation in the past decade, to involve local communities in resource management, and to provide regional environmental education. The development of the training course involved a survey of scientists and park managers to ascertain resource management needs, priorities for information to be disseminated, and impacts of tourism on the resource base. Current and potential tour guides were surveyed to identify their information needs, solicit their input in the training program, and to determine their knowledge and skills. Written questionnaires were developed and given to 400 tourists to determine their activities and environmental information needs, and hotel owners were censused to examine the economic feasibility of a local guide program. A pilot training course and guide program involving 12 Tortuguero residents demonstrated that a tour guide program: (1) helped mitigate negative tourism impacts on Tortuguero National Park's natural resources, particularly by regulating tourists on the park's 35-km beach used for nesting by endangered sea turtles; (2) provided environmental education to an important segment of the local community not traditionally reached through school or government development projects; (3) provided environmental information to tourists, thus enhancing their visit; and (4) provided local economic benefits through lucrative part-time employment, thereby allowing local people to participate more fully in the tourism system. An extended training course is being planned to provide further environmental education programming and to increase year-round employment opportunities for the tour guides.

  2. Supporting universal prevention programs: a two-phased coaching model.

    Science.gov (United States)

    Becker, Kimberly D; Darney, Dana; Domitrovich, Celene; Keperling, Jennifer Pitchford; Ialongo, Nicholas S

    2013-06-01

    Schools are adopting evidence-based programs designed to enhance students' emotional and behavioral competencies at increasing rates (Hemmeter et al. in Early Child Res Q 26:96-109, 2011). At the same time, teachers express the need for increased support surrounding implementation of these evidence-based programs (Carter and Van Norman in Early Child Educ 38:279-288, 2010). Ongoing professional development in the form of coaching may enhance teacher skills and implementation (Noell et al. in School Psychol Rev 34:87-106, 2005; Stormont et al. 2012). There exists a need for a coaching model that can be applied to a variety of teacher skill levels and one that guides coach decision-making about how best to support teachers. This article provides a detailed account of a two-phased coaching model with empirical support developed and tested with coaches and teachers in urban schools (Becker et al. 2013). In the initial universal coaching phase, all teachers receive the same coaching elements regardless of their skill level. Then, in the tailored coaching phase, coaching varies according to the strengths and needs of each teacher. Specifically, more intensive coaching strategies are used only with teachers who need additional coaching supports, whereas other teachers receive just enough support to consolidate and maintain their strong implementation. Examples of how coaches used the two-phased coaching model when working with teachers who were implementing two universal prevention programs (i.e., the PATHS curriculum and PAX Good Behavior Game [PAX GBG]) provide illustrations of the application of this model. The potential reach of this coaching model extends to other school-based programs as well as other settings in which coaches partner with interventionists to implement evidence-based programs.

  3. A GUIDED SWAT MODEL APPLICATION ON SEDIMENT YIELD MODELING IN PANGANI RIVER BASIN: LESSONS LEARNT

    Directory of Open Access Journals (Sweden)

    Preksedis Marco Ndomba

    2008-12-01

    Full Text Available The overall objective of this paper is to report on the lessons learnt from applying Soil and Water Assessment Tool (SWAT in a well guided sediment yield modelling study. The study area is the upstream of Pangani River Basin (PRB, the Nyumba Ya Mungu (NYM reservoir catchment, located in the North Eastern part of Tanzania. It should be noted that, previous modeling exercises in the region applied SWAT with preassumption that inter-rill or sheet erosion was the dominant erosion type. In contrast, in this study SWAT model application was guided by results of analysis of high temporal resolution of sediment flow data and hydro-meteorological data. The runoff component of the SWAT model was calibrated from six-years (i.e. 1977–1982 of historical daily streamflow data. The sediment component of the model was calibrated using one-year (1977–1988 daily sediment loads estimated from one hydrological year sampling programme (between March and November, 2005 rating curve. A long-term period over 37 years (i.e. 1969–2005 simulation results of the SWAT model was validated to downstream NYM reservoir sediment accumulation information. The SWAT model captured 56 percent of the variance (CE and underestimated the observed daily sediment loads by 0.9 percent according to Total Mass Control (TMC performance indices during a normal wet hydrological year, i.e., between November 1, 1977 and October 31, 1978, as the calibration period. SWAT model predicted satisfactorily the long-term sediment catchment yield with a relative error of 2.6 percent. Also, the model has identified erosion sources spatially and has replicated some erosion processes as determined in other studies and field observations in the PRB. This result suggests that for catchments where sheet erosion is dominant SWAT model may substitute the sediment-rating curve. However, the SWAT model could not capture the dynamics of sediment load delivery in some seasons to the catchment outlet.

  4. A GUIDED SWAT MODEL APPLICATION ON SEDIMENT YIELD MODELING IN PANGANI RIVER BASIN: LESSONS LEARNT

    Directory of Open Access Journals (Sweden)

    Preksedis M. Ndomba

    2008-01-01

    Full Text Available The overall objective of this paper is to report on the lessons learnt from applying Soil and Water Assessment Tool (SWAT in a well guided sediment yield modelling study. The study area is the upstream of Pangani River Basin (PRB, the Nyumba Ya Mungu (NYM reservoir catchment, located in the North Eastern part of Tanzania. It should be noted that, previous modeling exercises in the region applied SWAT with preassumption that inter-rill or sheet erosion was the dominant erosion type. In contrast, in this study SWAT model application was guided by results of analysis of high temporal resolution of sediment flow data and hydro-meteorological data. The runoff component of the SWAT model was calibrated from six-years (i.e. 1977¿1982 of historical daily streamflow data. The sediment component of the model was calibrated using one-year (1977-1988 daily sediment loads estimated from one hydrological year sampling programme (between March and November, 2005 rating curve. A long-term period over 37 years (i.e. 1969-2005 simulation results of the SWAT model was validated to downstream NYM reservoir sediment accumulation information. The SWAT model captured 56 percent of the variance (CE and underestimated the observed daily sediment loads by 0.9 percent according to Total Mass Control (TMC performance indices during a normal wet hydrological year, i.e., between November 1, 1977 and October 31, 1978, as the calibration period. SWAT model predicted satisfactorily the long-term sediment catchment yield with a relative error of 2.6 percent. Also, the model has identified erosion sources spatially and has replicated some erosion processes as determined in other studies and field observations in the PRB. This result suggests that for catchments where sheet erosion is dominant SWAT model may substitute the sediment-rating curve. However, the SWAT model could not capture the dynamics of sediment load delivery in some seasons to the catchment outlet.

  5. T sub E Xnical typesetting: A guide through the TEX typesetting program

    Energy Technology Data Exchange (ETDEWEB)

    Ketterer, S.P.

    1989-10-01

    This manual is designed as a comprehensive hands-on instructional manual for learning the T{sub E}X* computer typesetting program in a classroom environment. Each section presents a new concept in careful detail, concluding with an exercise (T{sub E}Xercise) to reinforce the learning of the concept. The manual introduces the novice T{sub E}X user to the program's basic command structure, along with the concepts of grouping, producing accents, making font changes, and generating mathematical symbols. The T{sub E}Xercises guide the new user in generating text containing footnotes, multilevel lists, and hanging indentations, as well as in magnifying text for viewgraphs. Once the basic text generation is defined, the more advanced topics of formatting math equations and tables are explained. A full range of math capabilities is presented --- beginning with simple one-line equations, progressing through complex numbered and aligned equations, and concluding with matrices. The sections on table generation present the basic concepts in T{sub E}X's table-formatting program and then build on them. The new user first learns to construct simple tables, and with careful explanations and guidance, learns to add one new table enhancement at a time. By the conclusion of these sections, the user can construct tables with horizontal and vertical rules and with column entries that are paragraphs. 1 ref.

  6. Early Site Permit Demonstration Program: Siting Guide, Site selection and evaluation criteria for an early site permit application

    International Nuclear Information System (INIS)

    1993-01-01

    In August 1991, the Joint Contractors came to agreement with Sandia National Laboratories (SNL) and the Department of Energy (DOE) on a workscope for the cost-shared Early Site Permit Demonstration Program. One task within the scope was the development of a guide for site selection criteria and procedures. A generic Siting Guide his been prepared that is a roadmap and tool for applicants to use developing detailed siting plans for their specific region of the country. The guide presents three fundamental principles that, if used, ensure a high degree of success for an ESP applicant. First, the site selection process should take into consideration environmentally diverse site locations within a given region of interest. Second, the process should contain appropriate opportunities for input from the public. Third, the process should be applied so that it is clearly reasonable to an impartial observer, based on appropriately selected criteria, including criteria which demonstrate that the site can host an advanced light water reactor (ALWR). The Siting Guide provides for a systematic, comprehensive site selection process in which three basic types of criteria (exclusionary, avoidance, and suitability) are presented via a four-step procedure. It provides a check list of the criteria for each one of these steps. Criteria are applied qualitatively, as well as presented numerically, within the guide. The applicant should use the generic guide as an exhaustive checklist, customizing the guide to his individual situation

  7. Early Site Permit Demonstration Program: Siting Guide, Site selection and evaluation criteria for an early site permit application. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-24

    In August 1991, the Joint Contractors came to agreement with Sandia National Laboratories (SNL) and the Department of Energy (DOE) on a workscope for the cost-shared Early Site Permit Demonstration Program. One task within the scope was the development of a guide for site selection criteria and procedures. A generic Siting Guide his been prepared that is a roadmap and tool for applicants to use developing detailed siting plans for their specific region of the country. The guide presents three fundamental principles that, if used, ensure a high degree of success for an ESP applicant. First, the site selection process should take into consideration environmentally diverse site locations within a given region of interest. Second, the process should contain appropriate opportunities for input from the public. Third, the process should be applied so that it is clearly reasonable to an impartial observer, based on appropriately selected criteria, including criteria which demonstrate that the site can host an advanced light water reactor (ALWR). The Siting Guide provides for a systematic, comprehensive site selection process in which three basic types of criteria (exclusionary, avoidance, and suitability) are presented via a four-step procedure. It provides a check list of the criteria for each one of these steps. Criteria are applied qualitatively, as well as presented numerically, within the guide. The applicant should use the generic guide as an exhaustive checklist, customizing the guide to his individual situation.

  8. Multiple models guide strategies for agricultural nutrient reductions

    Science.gov (United States)

    Scavia, Donald; Kalcic, Margaret; Muenich, Rebecca Logsdon; Read, Jennifer; Aloysius, Noel; Bertani, Isabella; Boles, Chelsie; Confesor, Remegio; DePinto, Joseph; Gildow, Marie; Martin, Jay; Redder, Todd; Robertson, Dale M.; Sowa, Scott P.; Wang, Yu-Chen; Yen, Haw

    2017-01-01

    In response to degraded water quality, federal policy makers in the US and Canada called for a 40% reduction in phosphorus (P) loads to Lake Erie, and state and provincial policy makers in the Great Lakes region set a load-reduction target for the year 2025. Here, we configured five separate SWAT (US Department of Agriculture's Soil and Water Assessment Tool) models to assess load reduction strategies for the agriculturally dominated Maumee River watershed, the largest P source contributing to toxic algal blooms in Lake Erie. Although several potential pathways may achieve the target loads, our results show that any successful pathway will require large-scale implementation of multiple practices. For example, one successful pathway involved targeting 50% of row cropland that has the highest P loss in the watershed with a combination of three practices: subsurface application of P fertilizers, planting cereal rye as a winter cover crop, and installing buffer strips. Achieving these levels of implementation will require local, state/provincial, and federal agencies to collaborate with the private sector to set shared implementation goals and to demand innovation and honest assessments of water quality-related programs, policies, and partnerships.

  9. Public health program planning logic model for community engaged type 2 diabetes management and prevention.

    Science.gov (United States)

    West, Joseph F

    2014-02-01

    Diabetes remains a growing epidemic with widening health inequity gaps in disease management, self-management knowledge, access to care and outcomes. Yet there is a paucity of evaluation tools for community engaged interventions aimed at closing the gaps and improving health. The Guide to Community Preventive Services (the Community Guide) developed by the Task Force on Community Preventive Services (the Task Force) at the Centers for Disease Control and Prevention (CDC) recommends two healthcare system level interventions, case management interventions and disease management programs, to improve glycemic control. However, as a public health resource guide for diabetes interventions a model for community engagement is a glaringly absent component of the Community Guide recommendations. In large part there are few evidence-based interventions featuring community engagement as a practice and system-level focus of chronic disease and Type 2 diabetes management. The central argument presented in this paper is that the absence of these types of interventions is due to the lack of tools for modeling and evaluating such interventions, especially among disparate and poor populations. A conceptual model emphasizing action-oriented micro-level community engagement is needed to complement the Community Guide and serve as the basis for testing and evaluation of these kinds of interventions. A unique logic model advancing the Community Guide diabetes recommendations toward measureable and sustainable community engagement for improved Type 2 diabetes outcomes is presented. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. A Practical Guide to Molecular Docking and Homology Modelling for Medicinal Chemists.

    Science.gov (United States)

    Lohning, Anna E; Levonis, Stephan M; Williams-Noonan, Billy; Schweiker, Stephanie S

    2017-01-01

    Elucidating details of the relationship between molecular structure and a particular biological end point is essential for successful, rational drug discovery. Molecular docking is a widely accepted tool for lead identification however, navigating the intricacies of the software can be daunting. Our objective was therefore to provide a step-by-step guide for those interested in incorporating contemporary basic molecular docking and homology modelling into their design strategy. Three molecular docking programs, AutoDock4, SwissDock and Surflex-Dock, were compared in the context of a case study where a set of steroidal and non-steroidal ligands were docked into the human androgen receptor (hAR) using both rigid and flexible target atoms. Metrics for comparison included how well each program predicted the X-ray structure orientation via root mean square deviation (rmsd), predicting known actives via ligand ranking and comparison to biological data where available. Benchmarking metrics were discussed in terms of identifying accurate and reliable results. For cases where no three dimensional structure exists, we provided a practical example for creating a homology model using Swiss-Model. Results showed an rmsd between X-ray ligands from wild-type and mutant receptors and docked poses were 4.15Å and 0.83Å (SwissDock), 2.69Å and 8.80Å (AutoDock4) and 0.39Å and 0.71Å (Surflex-Dock) respectively. Surflex-Dock performed consistently well in pose prediction (less than 2Å) while Auto- Dock4 predicted known active non-steroidal antiandrogens most accurately. Introducing flexibility into target atoms produced the largest degree of change in ligand ranking in Surflex-Dock. We produced a viable homology model of the P2X1 purireceptor for subsequent docking analysis. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  11. Cultural Adaptation of a Cognitive Behavior Therapy Guided Self-Help Program for Mexican American Women with Binge Eating Disorders

    Science.gov (United States)

    Shea, Munyi; Cachelin, Fary; Uribe, Luz; Striegel, Ruth H.; Thompson, Douglas; Wilson, G. Terence

    2012-01-01

    Data on the compatibility of evidence-based treatment in ethnic minority groups are limited. This study utilized focus group interviews to elicit Mexican American women's (N = 12) feedback on a cognitive behavior therapy guided self-help program for binge eating disorders. Findings revealed 6 themes to be considered during the cultural adaptation…

  12. Healthy Kids Make Better Learners: A Guide to School-Based Enrollment in State-Sponsored Health Insurance Programs.

    Science.gov (United States)

    Schwarz, Carolyn; Chavez, Elena; Imholz, Betsy; Lui, Earl

    Recognizing the relationship between child health and success in school and the importance of health insurance in remaining healthy, the Healthy Kids, Healthy Schools project of Consumers Union works to connect children in schools with California's state-sponsored health insurance program. This guide provides ideas on how a school and community…

  13. Schoolwide Programs: Parents' Guide & Capacity-Building Materials = Programas Schoolwide: Una Guia para Padres y Materias de Capacitacion.

    Science.gov (United States)

    WestEd, San Francisco, CA.

    The reauthorization of Title I (Improving America's Schools Act--IASA) made the Schoolwide Program (Schoolwide) a major strategy for schools with high poverty rates and stressed the importance of parent involvement. This guide was developed to provide professional development and parent education on Schoolwide implementation in California. The…

  14. Academic program models for undergraduate biomedical engineering.

    Science.gov (United States)

    Krishnan, Shankar M

    2014-01-01

    There is a proliferation of medical devices across the globe for the diagnosis and therapy of diseases. Biomedical engineering (BME) plays a significant role in healthcare and advancing medical technologies thus creating a substantial demand for biomedical engineers at undergraduate and graduate levels. There has been a surge in undergraduate programs due to increasing demands from the biomedical industries to cover many of their segments from bench to bedside. With the requirement of multidisciplinary training within allottable duration, it is indeed a challenge to design a comprehensive standardized undergraduate BME program to suit the needs of educators across the globe. This paper's objective is to describe three major models of undergraduate BME programs and their curricular requirements, with relevant recommendations to be applicable in institutions of higher education located in varied resource settings. Model 1 is based on programs to be offered in large research-intensive universities with multiple focus areas. The focus areas depend on the institution's research expertise and training mission. Model 2 has basic segments similar to those of Model 1, but the focus areas are limited due to resource constraints. In this model, co-op/internship in hospitals or medical companies is included which prepares the graduates for the work place. In Model 3, students are trained to earn an Associate Degree in the initial two years and they are trained for two more years to be BME's or BME Technologists. This model is well suited for the resource-poor countries. All three models must be designed to meet applicable accreditation requirements. The challenges in designing undergraduate BME programs include manpower, facility and funding resource requirements and time constraints. Each academic institution has to carefully analyze its short term and long term requirements. In conclusion, three models for BME programs are described based on large universities, colleges, and

  15. Extending Basic Education to the Elderly: A Guide to Program Development.

    Science.gov (United States)

    Spore, Melissa

    Based on a study by the Institute of Study for Older Adults of the language needs, program models, and learning dynamics of older adults lacking English skills, this manual provides guidelines for establishing language courses for older adults. After definitions of common terms and concepts are provided, Section I describes the literacy needs,…

  16. Curriculum Model. Teacher's Guide. Preparing for Tomorrow's World.

    Science.gov (United States)

    Iozzi, Louis A.

    "Preparing for Tomorrow's World" (PTW) is an interdisciplinary, future-oriented program incorporating information from the sciences/social sciences and addressing societal concerns which interface science/technology/society. The program promotes responsible citizenry with increased abilities in critical thinking, problem-solving,…

  17. Documentation and user's guide for DOSTOMAN: a pathways computer model of radionuclide movement

    International Nuclear Information System (INIS)

    Root, R.W. Jr.

    1980-01-01

    This report documents the mathematical development and the computer implementation of the Savannah River Laboratory computer code used to simulate radonuclide movement in the environment. The user's guide provides all the necessary information for the prospective user to input the required data, execute the computer program, and display the results

  18. Logic integer programming models for signaling networks.

    Science.gov (United States)

    Haus, Utz-Uwe; Niermann, Kathrin; Truemper, Klaus; Weismantel, Robert

    2009-05-01

    We propose a static and a dynamic approach to model biological signaling networks, and show how each can be used to answer relevant biological questions. For this, we use the two different mathematical tools of Propositional Logic and Integer Programming. The power of discrete mathematics for handling qualitative as well as quantitative data has so far not been exploited in molecular biology, which is mostly driven by experimental research, relying on first-order or statistical models. The arising logic statements and integer programs are analyzed and can be solved with standard software. For a restricted class of problems the logic models reduce to a polynomial-time solvable satisfiability algorithm. Additionally, a more dynamic model enables enumeration of possible time resolutions in poly-logarithmic time. Computational experiments are included.

  19. Description of mathematical models and computer programs

    International Nuclear Information System (INIS)

    1977-01-01

    The paper gives a description of mathematical models and computer programs for analysing possible strategies for spent fuel management, with emphasis on economic analysis. The computer programs developed, describe the material flows, facility construction schedules, capital investment schedules and operating costs for the facilities used in managing the spent fuel. The computer programs use a combination of simulation and optimization procedures for the economic analyses. Many of the fuel cycle steps (such as spent fuel discharges, storage at the reactor, and transport to the RFCC) are described in physical and economic terms through simulation modeling, while others (such as reprocessing plant size and commissioning schedules, interim storage facility commissioning schedules etc.) are subjected to economic optimization procedures to determine the approximate lowest-cost plans from among the available feasible alternatives

  20. Programmer's guide for the CC3 computer models of the concept for disposal of Canada's nuclear fuel waste

    International Nuclear Information System (INIS)

    Dougan, K.D.

    1996-11-01

    Atomic Energy of Canada Limited (AECL) is assessing a concept for disposing of CANDU reactor fuel waste in a vault deep in plutonic rock of the Canadian Shield. A computer program called the Systems Variability Analysis Code (SYVAC) was developed as an analytical tool for the postclosure (long-term) assessment of the concept, and for environmental assessments of other systems. SYVAC3, the third generation of the code, is an executive program that directs repeated simulation of the disposal system, which is described by the CC3 (Canadian Concept, generation 3) model. The CC3 model is comprised of the disposal vault submodel, the local geosphere submodel and the biosphere submodel. The CC3 Proarammer's Guide describes the programming philosophy and programming conventions not covered in the project standards. The guide includes a description of the overall logic for the CC3 vault, geosphere, and biosphere submodels. Each of the CC3 submodels is also isolated from the other two submbdels to create autonomous or 'stand-alone' submodels. The techniques used to isolate a CC3 submodel, and in particular to determine the submodells input and output data interface, are described. Structure charts are provided for the CC3 model and stand-alone submodels. This guide is meant as a companion document to the CC3 User's Manual. This guide does not describe how to use the CC3 software. The user should consult the CC3 User's Manual to determine how to configure, compile, link, and run the CC3 source code, as well as how to modify the data in the input files. It is intended that the CC3 code version CC305 be executed with SYVAC3 version SV309 and the Modelling Algorithm Library (ML3) version ML303, both developed for the assessment of the concept. SYVAC3-CC3-ML3 (also referred to as 'SC3') can be run on any platform containing an ANSI FORTRAN 77 compliant compiler. Recommended hardware environments are specified in the CC3 User's Manual. (author)

  1. Guidance for implementing an environmental, safety, and health-assurance program. Volume 15. A model plan for line organization environmental, safety, and health-assurance programs

    Energy Technology Data Exchange (ETDEWEB)

    Ellingson, A.C.; Trauth, C.A. Jr.

    1982-01-01

    This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. This particular document presents a model operational-level ES and H Assurance Program that may be used as a guide by an operational-level organization in developing its own plan. The model presented here reflects the guidance given in the total series of 15 documents.

  2. Data-driven modelling of structured populations a practical guide to the integral projection model

    CERN Document Server

    Ellner, Stephen P; Rees, Mark

    2016-01-01

    This book is a “How To” guide for modeling population dynamics using Integral Projection Models (IPM) starting from observational data. It is written by a leading research team in this area and includes code in the R language (in the text and online) to carry out all computations. The intended audience are ecologists, evolutionary biologists, and mathematical biologists interested in developing data-driven models for animal and plant populations. IPMs may seem hard as they involve integrals. The aim of this book is to demystify IPMs, so they become the model of choice for populations structured by size or other continuously varying traits. The book uses real examples of increasing complexity to show how the life-cycle of the study organism naturally leads to the appropriate statistical analysis, which leads directly to the IPM itself. A wide range of model types and analyses are presented, including model construction, computational methods, and the underlying theory, with the more technical material in B...

  3. Generic precise augmented reality guiding system and its calibration method based on 3D virtual model.

    Science.gov (United States)

    Liu, Miao; Yang, Shourui; Wang, Zhangying; Huang, Shujun; Liu, Yue; Niu, Zhenqi; Zhang, Xiaoxuan; Zhu, Jigui; Zhang, Zonghua

    2016-05-30

    Augmented reality system can be applied to provide precise guidance for various kinds of manual works. The adaptability and guiding accuracy of such systems are decided by the computational model and the corresponding calibration method. In this paper, a novel type of augmented reality guiding system and the corresponding designing scheme are proposed. Guided by external positioning equipment, the proposed system can achieve high relative indication accuracy in a large working space. Meanwhile, the proposed system is realized with a digital projector and the general back projection model is derived with geometry relationship between digitized 3D model and the projector in free space. The corresponding calibration method is also designed for the proposed system to obtain the parameters of projector. To validate the proposed back projection model, the coordinate data collected by a 3D positioning equipment is used to calculate and optimize the extrinsic parameters. The final projecting indication accuracy of the system is verified with subpixel pattern projecting technique.

  4. Equivalence Problem Solvability in Biparametric Gateway Program Models

    Directory of Open Access Journals (Sweden)

    A. E. Molchanov

    2014-01-01

    Full Text Available Algebraic program models with procedures are designed to analyze program semantic properties on their models called program schemes. Procedural liberisation problem and equivalence problem are stated for program models with procedures in which both defining parameters are chosen independently. Program models with procedures built over a given program model without procedures are investigated. Algorithms for both stated tasks are proposed for models where an additional restriction is applied: the intersection emptiness problem is solvable in the program model without procedures. Polynomial estimates for the complexity of the algorithms are shown. Some topics for further investigation are proposed.

  5. PDDP, A Data Parallel Programming Model

    Directory of Open Access Journals (Sweden)

    Karen H. Warren

    1996-01-01

    Full Text Available PDDP, the parallel data distribution preprocessor, is a data parallel programming model for distributed memory parallel computers. PDDP implements high-performance Fortran-compatible data distribution directives and parallelism expressed by the use of Fortran 90 array syntax, the FORALL statement, and the WHERE construct. Distributed data objects belong to a global name space; other data objects are treated as local and replicated on each processor. PDDP allows the user to program in a shared memory style and generates codes that are portable to a variety of parallel machines. For interprocessor communication, PDDP uses the fastest communication primitives on each platform.

  6. ZATPAC: a model consortium evaluates teen programs.

    Science.gov (United States)

    Owen, Kathryn; Murphy, Dana; Parsons, Chris

    2009-09-01

    How do we advance the environmental literacy of young people, support the next generation of environmental stewards and increase the diversity of the leadership of zoos and aquariums? We believe it is through ongoing evaluation of zoo and aquarium teen programming and have founded a consortium to pursue those goals. The Zoo and Aquarium Teen Program Assessment Consortium (ZATPAC) is an initiative by six of the nation's leading zoos and aquariums to strengthen institutional evaluation capacity, model a collaborative approach toward assessing the impact of youth programs, and bring additional rigor to evaluation efforts within the field of informal science education. Since its beginning in 2004, ZATPAC has researched, developed, pilot-tested and implemented a pre-post program survey instrument designed to assess teens' knowledge of environmental issues, skills and abilities to take conservation actions, self-efficacy in environmental actions, and engagement in environmentally responsible behaviors. Findings from this survey indicate that teens who join zoo/aquarium programs are already actively engaged in many conservation behaviors. After participating in the programs, teens showed a statistically significant increase in their reported knowledge of conservation and environmental issues and their abilities to research, explain, and find resources to take action on conservation issues of personal concern. Teens also showed statistically significant increases pre-program to post-program for various conservation behaviors, including "I talk with my family and/or friends about things they can do to help the animals or the environment," "I save water...," "I save energy...," "When I am shopping I look for recycled products," and "I help with projects that restore wildlife habitat."

  7. Guiding principles for conceptual model creation in manufacturing simulation

    NARCIS (Netherlands)

    Van der Zee, Durk-Jouke; Van der Vorst, Jack G. A. J.; Henderson, S.G.; Biller, B.; Hsieh, M.-H.; Shortle, J.; Tew, J.D.; Barton, R.R.

    2007-01-01

    Conceptual models serve as abstractions of user's perceptions of a system. The choice and detailing of these abstractions are key to model use and understanding for analyst and project stakeholders. In this article we consider guidance for the analyst in his creative job of conceptual modeling. More

  8. A model for firm-specific strategic wisdom : including illustrations and 49 guiding questions

    NARCIS (Netherlands)

    van Straten, Roeland Peter

    2017-01-01

    This PhD thesis provides an answer to the question ‘How may one think strategically’. It does so by presenting a new prescriptive ‘Model for Firm-Specific Strategic Wisdom’. This Model aims to guide any individual strategist in his or her thinking from a state of firm-specific ‘ignorance’ to a state

  9. The Performance of Academic Identity as Pedagogical Model and Guide in/through Lecture Discourse

    Science.gov (United States)

    McInnes, David

    2013-01-01

    This article argues that lecture discourse has the capacity to support students in their transition into modes of social critique and that the lecturer, through an enactment of an academic identity in lecture discourse, plays a crucial role as both model and guide. Certain crucial phases and sub-phases of lectures are used to model an engagement…

  10. Analysing empowerment-oriented email consultation for parents : development of the Guiding the Empowerment Process model

    NARCIS (Netherlands)

    dr. Christa C.C. Nieuwboer

    2014-01-01

    Online consultation is increasingly offered by parenting practitioners, but it is not clear if it is feasible to provide empowerment-oriented support in a single session email consultation. Based on the empowerment theory, we developed the Guiding the Empowerment Process model (GEP model) to

  11. Database structure for plasma modeling programs

    International Nuclear Information System (INIS)

    Dufresne, M.; Silvester, P.P.

    1993-01-01

    Continuum plasma models often use a finite element (FE) formulation. Another approach is simulation models based on particle-in-cell (PIC) formulation. The model equations generally include four nonlinear differential equations specifying the plasma parameters. In simulation a large number of equations must be integrated iteratively to determine the plasma evolution from an initial state. The complexity of the resulting programs is a combination of the physics involved and the numerical method used. The data structure requirements of plasma programs are stated by defining suitable abstract data types. These abstractions are then reduced to data structures and a group of associated algorithms. These are implemented in an object oriented language (C++) as object classes. Base classes encapsulate data management into a group of common functions such as input-output management, instance variable updating and selection of objects by Boolean operations on their instance variables. Operations are thereby isolated from specific element types and uniformity of treatment is guaranteed. Creation of the data structures and associated functions for a particular plasma model is reduced merely to defining the finite element matrices for each equation, or the equations of motion for PIC models. Changes in numerical method or equation alterations are readily accommodated through the mechanism of inheritance, without modification of the data management software. The central data type is an n-relation implemented as a tuple of variable internal structure. Any finite element program may be described in terms of five relational tables: nodes, boundary conditions, sources, material/particle descriptions, and elements. Equivalently, plasma simulation programs may be described using four relational tables: cells, boundary conditions, sources, and particle descriptions

  12. Transnational nursing programs: models, advantages and challenges.

    Science.gov (United States)

    Wilson, Michael

    2002-07-01

    Conducting transnational programs can be a very rewarding activity for a School, Faculty or University. Apart from increasing the profile of the university, the conduct of transnational programs can also provide the university with openings for business opportunities, consultative activities, and collaborative research. It can also be a costly exercise placing an enormous strain on limited resources with little reward for the provider. Transnational ventures can become nonviable entities in a very short period of time due to unanticipated global economic trends. Transnational courses offered by Faculties of Business and Computing are commonplace, however, there is a growing number of health science programs, particularly nursing that are being offered transnational. This paper plans an overview of several models employed for the delivery of transnational nursing courses and discusses several key issues pertaining to conducting courses outside the host university's country.

  13. The NIAID Radiation Countermeasures Program business model.

    Science.gov (United States)

    Hafer, Nathaniel; Maidment, Bert W; Hatchett, Richard J

    2010-12-01

    The National Institute of Allergy and Infectious Diseases (NIAID) Radiation/Nuclear Medical Countermeasures Development Program has developed an integrated approach to providing the resources and expertise required for the research, discovery, and development of radiation/nuclear medical countermeasures (MCMs). These resources and services lower the opportunity costs and reduce the barriers to entry for companies interested in working in this area and accelerate translational progress by providing goal-oriented stewardship of promising projects. In many ways, the radiation countermeasures program functions as a "virtual pharmaceutical firm," coordinating the early and mid-stage development of a wide array of radiation/nuclear MCMs. This commentary describes the radiation countermeasures program and discusses a novel business model that has facilitated product development partnerships between the federal government and academic investigators and biopharmaceutical companies.

  14. Information structure design for databases a practical guide to data modelling

    CERN Document Server

    Mortimer, Andrew J

    2014-01-01

    Computer Weekly Professional Series: Information Structure Design for Databases: A Practical Guide to Data modeling focuses on practical data modeling covering business and information systems. The publication first offers information on data and information, business analysis, and entity relationship model basics. Discussions cover degree of relationship symbols, relationship rules, membership markers, types of information systems, data driven systems, cost and value of information, importance of data modeling, and quality of information. The book then takes a look at entity relationship mode

  15. Stellar Atmospheric Modelling for the ACCESS Program

    Science.gov (United States)

    Morris, Matthew; Kaiser, Mary Elizabeth; Bohlin, Ralph; Kurucz, Robert; ACCESS Team

    2018-01-01

    A goal of the ACCESS program (Absolute Color Calibration Experiment for Standard Stars) is to enable greater discrimination between theoretical astrophysical models and observations, where the comparison is limited by systematic errors associated with the relative flux calibration of the targets. To achieve these goals, ACCESS has been designed as a sub-orbital rocket borne payload and ground calibration program, to establish absolute flux calibration of stellar targets at high resolution spectra in addition to the HST/CALSPEC data, we have generated stellar atmosphere models for ACCESS flight candidates, as well as a selection of A and G stars from the CALSPEC database. Stellar atmosphere models were generated using Atlas 9 and Atlas 12 Kurucz stellar atmosphere software. The effective temperature, log(g), metallicity, and redenning were varied and the chi-squared statistic was minimized to obtain a best-fit model. A comparison of these models and the results from interpolation between grids of existing models will be presented. The impact of the flexibility of the Atlas 12 input parameters (e.g. solar metallicity fraction, abundances, microturbulent velocity) is being explored.

  16. Structure-guided development of a high-affinity human Programmed Cell Death-1: Implications for tumor immunotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Lázár-Molnár, Eszter; Scandiuzzi, Lisa; Basu, Indranil; Quinn, Thomas; Sylvestre, Eliezer; Palmieri, Edith; Ramagopal, Udupi A.; Nathenson, Stanley G.; Guha, Chandan; Almo, Steven C.

    2017-03-01

    Programmed Cell Death-1 (PD-1) is an inhibitory immune receptor, which plays critical roles in T cell co-inhibition and exhaustion upon binding to its ligands PD-L1 and PD-L2. We report the crystal structure of the human PD-1 ectodomain and the mapping of the PD-1 binding interface. Mutagenesis studies confirmed the crystallographic interface, and resulted in mutant PD-1 receptors with altered affinity and ligand-specificity. In particular, a high-affinity mutant PD-1 (HA PD-1) exhibited 45 and 30-fold increase in binding to PD-L1 and PD-L2, respectively, due to slower dissociation rates. This mutant (A132L) was used to engineer a soluble chimeric Ig fusion protein for cell-based and in vivo studies. HA PD-1 Ig showed enhanced binding to human dendritic cells, and increased T cell proliferation and cytokine production in a mixed lymphocyte reaction (MLR) assay. Moreover, in an experimental model of murine Lewis lung carcinoma, HA PD-1 Ig treatment synergized with radiation therapy to decrease local and metastatic tumor burden, as well as in the establishment of immunological memory responses. Our studies highlight the value of structural considerations in guiding the design of a high-affinity chimeric PD-1 Ig fusion protein with robust immune modulatory properties, and underscore the power of combination therapies to selectively manipulate the PD-1 pathway for tumor immunotherapy.

  17. Structure-guided development of a high-affinity human Programmed Cell Death-1: Implications for tumor immunotherapy

    Directory of Open Access Journals (Sweden)

    Eszter Lázár-Molnár

    2017-03-01

    Full Text Available Programmed Cell Death-1 (PD-1 is an inhibitory immune receptor, which plays critical roles in T cell co-inhibition and exhaustion upon binding to its ligands PD-L1 and PD-L2. We report the crystal structure of the human PD-1 ectodomain and the mapping of the PD-1 binding interface. Mutagenesis studies confirmed the crystallographic interface, and resulted in mutant PD-1 receptors with altered affinity and ligand-specificity. In particular, a high-affinity mutant PD-1 (HA PD-1 exhibited 45 and 30-fold increase in binding to PD-L1 and PD-L2, respectively, due to slower dissociation rates. This mutant (A132L was used to engineer a soluble chimeric Ig fusion protein for cell-based and in vivo studies. HA PD-1 Ig showed enhanced binding to human dendritic cells, and increased T cell proliferation and cytokine production in a mixed lymphocyte reaction (MLR assay. Moreover, in an experimental model of murine Lewis lung carcinoma, HA PD-1 Ig treatment synergized with radiation therapy to decrease local and metastatic tumor burden, as well as in the establishment of immunological memory responses. Our studies highlight the value of structural considerations in guiding the design of a high-affinity chimeric PD-1 Ig fusion protein with robust immune modulatory properties, and underscore the power of combination therapies to selectively manipulate the PD-1 pathway for tumor immunotherapy.

  18. User's Guide for the NREL Force and Loads Analysis Program. [National Renewable Energy Laboratory (NREL)

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A.D.

    1992-08-01

    The following report gives the reader an overview of and instructions on the proper use of the National Renewable Energy Laboratory Force and Loads Analysis Program (FLAP, version 2.2). It is intended as a tool for prediction of rotor and blade loads and response for two- or three-bladed rigid hub wind turbines. The effects of turbulence are accounted for. The objectives of the report are to give an overview of the code and also show the methods of data input and correct code execution steps in order to model an example two-bladed rigid hub turbine. A large portion of the discussion (Sections 6.0, 7.0, and 8.0) is devoted to the subject of inputting and running the code for wind turbulence effects. The ability to include turbulent wind effects is perhaps the biggest change in the code since the release of FLAP version 2.01 in 1988. This report is intended to be a user's guide. It does not contain a theoretical discussion on equations of motion, assumptions, underlying theory, etc. It is intended to be used in conjunction with Wright, Buhl, and Thresher (1988).

  19. Ecological Modeling Guide for Ecosystem Restoration and Management

    Science.gov (United States)

    2012-08-01

    model. Then, identify a series of intermediate developmental models ( IDM ) that will be quantified sequentially until the final model has been...attack has been outlined, the next step is to begin quantifying and evaluating the series of IDMs (Grant and Swannack 2008). There is not a particular...order in which IDMs should be developed – in general, the first IDM should be trivially simple and subsequent IDMs should be increasingly complex

  20. Solar Advisor Model User Guide for Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Gilman, P.; Blair, N.; Mehos, M.; Christensen, C.; Janzou, S.; Cameron, C.

    2008-08-01

    The Solar Advisor Model (SAM) provides a consistent framework for analyzing and comparing power system costs and performance across the range of solar technologies and markets, from photovoltaic systems for residential and commercial markets to concentrating solar power and large photovoltaic systems for utility markets. This manual describes Version 2.0 of the software, which can model photovoltaic and concentrating solar power technologies for electric applications for several markets. The current version of the Solar Advisor Model does not model solar heating and lighting technologies.

  1. Model for behavior observation training programs

    International Nuclear Information System (INIS)

    Berghausen, P.E. Jr.

    1987-01-01

    Continued behavior observation is mandated by ANSI/ANS 3.3. This paper presents a model for behavior observation training that is in accordance with this standard and the recommendations contained in US NRC publications. The model includes seventeen major topics or activities. Ten of these are discussed: Pretesting of supervisor's knowledge of behavior observation requirements, explanation of the goals of behavior observation programs, why behavior observation training programs are needed (legal and psychological issues), early indicators of emotional instability, use of videotaped interviews to demonstrate significant psychopathology, practice recording behaviors, what to do when unusual behaviors are observed, supervisor rationalizations for noncompliance, when to be especially vigilant, and prevention of emotional instability

  2. High Five: A Nutrition Program for High School Youth. Teacher Guide.

    Science.gov (United States)

    James, Delores C. S.; Rienzo, Barbara A.

    This teacher's guide is part of a multiculturally sensitive teaching package to promote health-enhancing nutrition concepts for Florida public high school students. These nutrition promotion materials are intended to be incorporated into life skills management, home economics, physical education, or life science classes. The guide includes…

  3. Marketing Agricultural Products. Curriculum Guide Developed for Secondary and Post Secondary Agriculture Programs.

    Science.gov (United States)

    Miller, W. Wade; And Others

    This curriculum guide can be used by secondary and postsecondary agriculture instructors for a semester course in marketing agricultural products or individual units can be incorporated in other courses. The curriculum guide consists of six units of study made up of two to eight lessons each. The units cover the following topics: (1) marketing…

  4. Water 'n Kids. Instructor Guide and Coloring Book. Boating Safety Programs for Children and Youth.

    Science.gov (United States)

    Coast Guard Auxiliary, St. Louis, MO. Dept. of Education.

    This packet contains a coloring book on water safety and a guide for Coast Guard Auxiliary members making brief presentations to preschool and elementary school students through Grade 4. The guide discusses school or site contact and approval, equipment and teaching aids to bring to the classroom, and suggestions to the beginning instructor on…

  5. Compulsory Education in Italian Middle School Music Departments and the Music Education Act : Textbooks Associated with the 1963 Program and Guide to Music Education

    OpenAIRE

    Onouchi, Ai

    2015-01-01

    This paper aims to clarify the requirements for music education as part of general education in Italy through an assessment of the 1963 program, the music textbooks published by Ricordi during the implementation of that program, and the Guide to Music Education textbooks. I found that the textbooks focused on music theory, although the 1963 program emphasized practical training of students with a love of music. Further, the Guide to Music Education series was published specifically for use in...

  6. Generalized data stacking programming model with applications

    OpenAIRE

    Hala Samir Elhadidy; Rawya Yehia Rizk; Hassen Taher Dorrah

    2016-01-01

    Recent researches have shown that, everywhere in various sciences the systems are following stacked-based stored change behavior when subjected to events or varying environments “on and above” their normal situations. This paper presents a generalized data stack programming (GDSP) model which is developed to describe the system changes under varying environment. These changes which are captured with different ways such as sensor reading are stored in matrices. Extraction algorithm and identif...

  7. Can Household Benefit from Stochastic Programming Models?

    DEFF Research Database (Denmark)

    Rasmussen, Kourosh Marjani; Madsen, Claus A.; Poulsen, Rolf

    2014-01-01

    The Danish mortgage market is large and sophisticated. However, most Danish mortgage banks advise private home-owners based on simple, if sensible, rules of thumb. In recent years a number of papers (from Nielsen and Poulsen in J Econ Dyn Control 28:1267–1289, 2004 over Rasmussen and Zenios in J...... Risk 10:1–18, 2007 to Pedersen et al. in Ann Oper Res, 2013) have suggested a model-based, stochastic programming approach to mortgage choice. This paper gives an empirical comparison of performance over the period 2000–2010 of the rules of thumb to the model-based strategies. While the rules of thumb...

  8. A teaching resource using the GUIDE environment: simplified model of the eye for secondary school students

    Science.gov (United States)

    Gómez-Varela, A. I.; Salvado-Vara, F.; Bao-Varela, C.

    2014-07-01

    Nowadays, new technologies have great influence on our lives and how we access to the information. The new generations have never known a world without them and make use of these new technologies in practically all facets of their day-to-day. Education systems have also evolved rapidly and frequently make use of learning strategies based on interactive tools. In this work we have created a graphical user interface with GUIDE, a development environment of MATLAB, to show, in a simple way, how the eye works. This interactive program is addressed to the first courses of secondary education and designed to introduce them to the basic concepts of the normal refractive condition of the eye and the most common refractive errors, as myopia and hyperopia. The graphic interface makes use of the simplified model of the eye, where the optic system of the visual organ is represented by a converging lens (cornea and crystalline) and a screen (retina). Emmetropic, myopic and hyperopic eye operation is shown graphically to the students, as well as how these focusing errors can be solved with a diverging and converging lens, respectively. This teaching tool was used this academic course in the Colegio Hogar de Santa Margarita (A Coruña) for a better understanding of the students in this matter and to catch their attention to the world of Optics and its importance.

  9. MR-guided transcranial brain HIFU in small animal models

    Energy Technology Data Exchange (ETDEWEB)

    Larrat, B; Pernot, M; Aubry, J-F; Sinkus, R; Fink, M; Tanter, M [Institut Langevin, ESPCI ParisTech, CNRS UMR 7587, INSERM U979, Universite Paris VII, Laboratoire Ondes et Acoustique, 10 rue Vauquelin, 75 231 Paris Cedex 05 (France); Dervishi, E; Boch, A-L [Hopital de la Pitie-Salpetriere-INSERM, U495, 47 Boulevard de l' Hopital, 75651 Paris Cedex 13 (France); Seilhean, D [Hopital de la Pitie-Salpetriere-Neuropathology Department, 47 Boulevard de l' Hopital, 75651 Paris Cedex 13 (France); Marie, Y [Hopital de la Pitie-Salpetriere-Neurosurgery Department, 47 Boulevard de l' Hopital, 75651 Paris Cedex 13 (France)], E-mail: benoit.larrat@espci.fr

    2010-01-21

    Recent studies have demonstrated the feasibility of transcranial high-intensity focused ultrasound (HIFU) therapy in the brain using adaptive focusing techniques. However, the complexity of the procedures imposes provision of accurate targeting, monitoring and control of this emerging therapeutic modality in order to ensure the safety of the treatment and avoid potential damaging effects of ultrasound on healthy tissues. For these purposes, a complete workflow and setup for HIFU treatment under magnetic resonance (MR) guidance is proposed and implemented in rats. For the first time, tissue displacements induced by the acoustic radiation force are detected in vivo in brain tissues and measured quantitatively using motion-sensitive MR sequences. Such a valuable target control prior to treatment assesses the quality of the focusing pattern in situ and enables us to estimate the acoustic intensity at focus. This MR-acoustic radiation force imaging is then correlated with conventional MR-thermometry sequences which are used to follow the temperature changes during the HIFU therapeutic session. Last, pre- and post-treatment magnetic resonance elastography (MRE) datasets are acquired and evaluated as a new potential way to non-invasively control the stiffness changes due to the presence of thermal necrosis. As a proof of concept, MR-guided HIFU is performed in vitro in turkey breast samples and in vivo in transcranial rat brain experiments. The experiments are conducted using a dedicated MR-compatible HIFU setup in a high-field MRI scanner (7 T). Results obtained on rats confirmed that both the MR localization of the US focal point and the pre- and post-HIFU measurement of the tissue stiffness, together with temperature control during HIFU are feasible and valuable techniques for efficient monitoring of HIFU in the brain. Brain elasticity appears to be more sensitive to the presence of oedema than to tissue necrosis.

  10. MR-guided transcranial brain HIFU in small animal models

    Science.gov (United States)

    Larrat, B.; Pernot, M.; Aubry, J.-F.; Dervishi, E.; Sinkus, R.; Seilhean, D.; Marie, Y.; Boch, A.-L.; Fink, M.; Tanter, M.

    2010-01-01

    Recent studies have demonstrated the feasibility of transcranial high-intensity focused ultrasound (HIFU) therapy in the brain using adaptive focusing techniques. However, the complexity of the procedures imposes provision of accurate targeting, monitoring and control of this emerging therapeutic modality in order to ensure the safety of the treatment and avoid potential damaging effects of ultrasound on healthy tissues. For these purposes, a complete workflow and setup for HIFU treatment under magnetic resonance (MR) guidance is proposed and implemented in rats. For the first time, tissue displacements induced by the acoustic radiation force are detected in vivo in brain tissues and measured quantitatively using motion-sensitive MR sequences. Such a valuable target control prior to treatment assesses the quality of the focusing pattern in situ and enables us to estimate the acoustic intensity at focus. This MR-acoustic radiation force imaging is then correlated with conventional MR-thermometry sequences which are used to follow the temperature changes during the HIFU therapeutic session. Last, pre- and post-treatment magnetic resonance elastography (MRE) datasets are acquired and evaluated as a new potential way to non-invasively control the stiffness changes due to the presence of thermal necrosis. As a proof of concept, MR-guided HIFU is performed in vitro in turkey breast samples and in vivo in transcranial rat brain experiments. The experiments are conducted using a dedicated MR-compatible HIFU setup in a high-field MRI scanner (7 T). Results obtained on rats confirmed that both the MR localization of the US focal point and the pre- and post-HIFU measurement of the tissue stiffness, together with temperature control during HIFU are feasible and valuable techniques for efficient monitoring of HIFU in the brain. Brain elasticity appears to be more sensitive to the presence of oedema than to tissue necrosis.

  11. Real-time Social Internet Data to Guide Forecasting Models

    Energy Technology Data Exchange (ETDEWEB)

    Del Valle, Sara Y. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-20

    Our goal is to improve decision support by monitoring and forecasting events using social media, mathematical models, and quantifying model uncertainty. Our approach is real-time, data-driven forecasts with quantified uncertainty: Not just for weather anymore. Information flow from human observations of events through an Internet system and classification algorithms is used to produce quantitatively uncertain forecast. In summary, we want to develop new tools to extract useful information from Internet data streams, develop new approaches to assimilate real-time information into predictive models, validate approaches by forecasting events, and our ultimate goal is to develop an event forecasting system using mathematical approaches and heterogeneous data streams.

  12. User's guide for waste tank corrosion data model code

    International Nuclear Information System (INIS)

    Mackey, D.B.; Divine, J.R.

    1986-12-01

    Corrosion tests were conducted on A-516 and A-537 carbon steel in simulated Double Shell Slurry, Future PUREX, and Hanford Facilities wastes. The corrosion rate data, gathered between 25 and 180 0 C, were statistically ''modeled'' for each waste; a fourth model was developed that utilized the combined data. The report briefly describes the modeling procedure and details on how to access information through a computerized data system. Copies of the report and operating information may be obtained from the author (DB Mackey) at 509-376-9844 of FTS 444-9844

  13. Framatome experience and programs in relation to guide tube support pin cracking

    International Nuclear Information System (INIS)

    Benhamou, C.; Poitrenaud, P.

    1989-01-01

    Guide tube support pins installed in the upper internals of pressurized water reactors (PWR) have failed by stress corrosion cracking (SCC). Typical pin crack locations are in the first thread area, shank-to-shoulder transition, and at the end of the leaves. The support pins were made of Inconel X-750 with a solution treatment between 885 degree C (1625 degree F) and 1150 degree C (2100 degree F), followed by a single or double aging, depending on the material supplier. EDF and Framatome initiated an extensive program to address the concern for the potential of support pin cracking in 21 operating units. Short-term actions identified the cause of cracking as a combination of inherent high design stress and a material susceptible to stress corrosion cracking. Long-range objectives are to determine the relation between metallurgy and SCC resistance and to decrease the operating stress. Second-generation design improvements to increase SCC resistance included a revised heat treatment of solution annealing at 1093 degree C (2000 degree F) followed by aging at 704 degree C (1300 degree F), and use of a parabolic radius in the shank/shoulder area, and decreasing the installation torque. Third generation changes included an improved torquing procedure, polishing of crack-sensitive areas, and tighter dimensional control. Fourth-generation pin modifications required the use of Inconel X-750 water quenched from the solution-annealing temperature to improve resistance to SCC with thread rolling after aging. Stress corrosion cracking tests of Inconel X-750, 718, and A286 in a PWR environment were performed. Smooth tensile data on Inconel X-750 with the second-generation heat treatment allowed a life prediction of 80,000 hours or 11 years for a stress level about yield strength. The effect of grain size, grain boundary phases, and precipitate morphology on resistance to stress corrosion cracking were also evaluated

  14. Cultural Adaptation of a Cognitive Behavior Therapy Guided Self-Help Program for Mexican American Women With Binge Eating Disorders.

    Science.gov (United States)

    Shea, Munyi; Cachelin, Fary; Uribe, Luz; Striegel, Ruth H; Thompson, Douglas; Wilson, G Terence

    2012-07-01

    Data on the compatibility of evidence-based treatment in ethnic minority groups are limited. This study utilized focus group interviews to elicit Mexican American women's ( N = 12) feedback on a cognitive behavior therapy guided self-help program for binge eating disorders. Findings revealed 6 themes to be considered during the cultural adaptation process and highlighted the importance of balancing the fidelity and cultural relevance of evidence-based treatment when disseminating it across diverse racial/ethnic groups.

  15. Genetic Programming for Automatic Hydrological Modelling

    Science.gov (United States)

    Chadalawada, Jayashree; Babovic, Vladan

    2017-04-01

    One of the recent challenges for the hydrologic research community is the need for the development of coupled systems that involves the integration of hydrologic, atmospheric and socio-economic relationships. This poses a requirement for novel modelling frameworks that can accurately represent complex systems, given, the limited understanding of underlying processes, increasing volume of data and high levels of uncertainity. Each of the existing hydrological models vary in terms of conceptualization and process representation and is the best suited to capture the environmental dynamics of a particular hydrological system. Data driven approaches can be used in the integration of alternative process hypotheses in order to achieve a unified theory at catchment scale. The key steps in the implementation of integrated modelling framework that is influenced by prior understanding and data, include, choice of the technique for the induction of knowledge from data, identification of alternative structural hypotheses, definition of rules, constraints for meaningful, intelligent combination of model component hypotheses and definition of evaluation metrics. This study aims at defining a Genetic Programming based modelling framework that test different conceptual model constructs based on wide range of objective functions and evolves accurate and parsimonious models that capture dominant hydrological processes at catchment scale. In this paper, GP initializes the evolutionary process using the modelling decisions inspired from the Superflex framework [Fenicia et al., 2011] and automatically combines them into model structures that are scrutinized against observed data using statistical, hydrological and flow duration curve based performance metrics. The collaboration between data driven and physical, conceptual modelling paradigms improves the ability to model and manage hydrologic systems. Fenicia, F., D. Kavetski, and H. H. Savenije (2011), Elements of a flexible approach

  16. Nine key principles to guide youth mental health: development of service models in New South Wales.

    Science.gov (United States)

    Howe, Deborah; Batchelor, Samantha; Coates, Dominiek; Cashman, Emma

    2014-05-01

    Historically, the Australian health system has failed to meet the needs of young people with mental health problems and mental illness. In 2006, New South Wales (NSW) Health allocated considerable funds to the reform agenda of mental health services in NSW to address this inadequacy. Children and Young People's Mental Health (CYPMH), a service that provides mental health care for young people aged 12-24 years, with moderate to severe mental health problems, was chosen to establish a prototype Youth Mental Health (YMH) Service Model for NSW. This paper describes nine key principles developed by CYPMH to guide the development of YMH Service Models in NSW. A literature review, numerous stakeholder consultations and consideration of clinical best practice were utilized to inform the development of the key principles. Subsequent to their development, the nine key principles were formally endorsed by the Mental Health Program Council to ensure consistency and monitor the progress of YMH services across NSW. As a result, between 2008 and 2012 YMH Services across NSW regularly reported on their activities against each of the nine key principles demonstrating how each principle was addressed within their service. The nine key principles provide mental health services a framework for how to reorient services to accommodate YMH and provide a high-quality model of care. [Corrections added on 29 November 2013, after first online publication: The last two sentences of the Results section have been replaced with "As a result, between 2008 and 2012 YMH Services across NSW regularly reported on their activities against each of the nine key principles demonstrating how each principle was addressed within their service."]. © 2013 Wiley Publishing Asia Pty Ltd.

  17. Guided Inquiry and Consensus-Building Used to Construct Cellular Models

    Directory of Open Access Journals (Sweden)

    Joel I. Cohen

    2015-02-01

    Full Text Available Using models helps students learn from a “whole systems” perspective when studying the cell. This paper describes a model that employs guided inquiry and requires consensus building among students for its completion. The model is interactive, meaning that it expands upon a static model which, once completed, cannot be altered and additionally relates various levels of biological organization (molecular, organelle, and cellular to define cell and organelle function and interaction. Learning goals are assessed using data summed from final grades and from images of the student’s final cell model (plant, bacteria, and yeast taken from diverse seventh grade classes. Instructional figures showing consensus-building pathways and seating arrangements are discussed. Results suggest that the model leads to a high rate of participation, facilitates guided inquiry, and fosters group and individual exploration by challenging student understanding of the living cell.

  18. Petroleum Refinery Jobs and Economic Development Impact (JEDI) Model User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Marshall [MRG and Associates, Nevada City, CA (United States)

    2013-12-31

    The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are user-friendly tools utilized to estimate the economic impacts at the local level of constructing and operating fuel and power generation projects for a range of conventional and renewable energy technologies. The JEDI Petroleum Refinery Model User Reference Guide was developed to assist users in employing and understanding the model. This guide provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the model estimates job creation, earning and output (total economic activity) for a given petroleum refinery. This includes the direct, indirect and induced economic impacts to the local economy associated with the refinery's construction and operation phases. Project cost and job data used in the model are derived from the most current cost estimations available. Local direct and indirect economic impacts are estimated using economic multipliers derived from IMPLAN software. By determining the regional economic impacts and job creation for a proposed refinery, the JEDI Petroleum Refinery model can be used to field questions about the added value refineries may bring to the local community.

  19. Comparison of Building Energy Modeling Programs: Building Loads

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Dandan [Tsinghua Univ., Beijing (China); Hong, Tianzhen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yan, Da [Tsinghua Univ., Beijing (China); Wang, Chuang [Tsinghua Univ., Beijing (China)

    2012-06-01

    This technical report presented the methodologies, processes, and results of comparing three Building Energy Modeling Programs (BEMPs) for load calculations: EnergyPlus, DeST and DOE-2.1E. This joint effort, between Lawrence Berkeley National Laboratory, USA and Tsinghua University, China, was part of research projects under the US-China Clean Energy Research Center on Building Energy Efficiency (CERC-BEE). Energy Foundation, an industrial partner of CERC-BEE, was the co-sponsor of this study work. It is widely known that large discrepancies in simulation results can exist between different BEMPs. The result is a lack of confidence in building simulation amongst many users and stakeholders. In the fields of building energy code development and energy labeling programs where building simulation plays a key role, there are also confusing and misleading claims that some BEMPs are better than others. In order to address these problems, it is essential to identify and understand differences between widely-used BEMPs, and the impact of these differences on load simulation results, by detailed comparisons of these BEMPs from source code to results. The primary goal of this work was to research methods and processes that would allow a thorough scientific comparison of the BEMPs. The secondary goal was to provide a list of strengths and weaknesses for each BEMP, based on in-depth understandings of their modeling capabilities, mathematical algorithms, advantages and limitations. This is to guide the use of BEMPs in the design and retrofit of buildings, especially to support China’s building energy standard development and energy labeling program. The research findings could also serve as a good reference to improve the modeling capabilities and applications of the three BEMPs. The methodologies, processes, and analyses employed in the comparison work could also be used to compare other programs. The load calculation method of each program was analyzed and compared to

  20. Ecotourism, sustainable development, and conservation education: Development of a tour guide training program in Tortuguero, Coast Rica

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, S.K. (Univ. of Florida, Gainesville (United States)); Robles, R. (Caribbean Conservation Corp., San Jose (Costa Rica))

    A tour guide training program was developed for rural communities near Costa Rica's Tortuguero National Park to respond to the impacts of the 24-fold increase in park visitation in the past decade, to involve local communities in resource management, and to provide regional environmental education. The development of the training course involved a survey of scientists and park managers, to determine resource management and information needs, and economic feasibility. A pilot training course and guide program involving 12 Tortuguero residents demonstrated that a tour guide program: (1) helped mitigate negative tourism impacts on Tortuguero National Park's natural resources, particularly by regulating tourists on the park's 35-km beach used for nesting by endangered sea turtles; (2) provided environmental education to an important segment of the local community not traditionally reached through school or government development projects; (3) provided environmental information to tourists, thus enhancing their visit; and (4) provided local economic benefits through lucrative part-time employment, thereby allowing local people to participate more fully in the tourism system.

  1. Accounting for methodological, structural, and parameter uncertainty in decision-analytic models: a practical guide.

    Science.gov (United States)

    Bilcke, Joke; Beutels, Philippe; Brisson, Marc; Jit, Mark

    2011-01-01

    Accounting for uncertainty is now a standard part of decision-analytic modeling and is recommended by many health technology agencies and published guidelines. However, the scope of such analyses is often limited, even though techniques have been developed for presenting the effects of methodological, structural, and parameter uncertainty on model results. To help bring these techniques into mainstream use, the authors present a step-by-step guide that offers an integrated approach to account for different kinds of uncertainty in the same model, along with a checklist for assessing the way in which uncertainty has been incorporated. The guide also addresses special situations such as when a source of uncertainty is difficult to parameterize, resources are limited for an ideal exploration of uncertainty, or evidence to inform the model is not available or not reliable. for identifying the sources of uncertainty that influence results most are also described. Besides guiding analysts, the guide and checklist may be useful to decision makers who need to assess how well uncertainty has been accounted for in a decision-analytic model before using the results to make a decision.

  2. IEA Implementing Agreements and Annexes: A Guide for Building Technologies Program Managers

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Meredydd; Meier, Alan; Runci, Paul J.

    2008-08-05

    This guide presents insights and guidance from DOE’s gathered through longstanding and extensive participation in IEA implementing agreements (IAs) and annexes. Even though DOE has been a key participant in international research activities through the IEA since the 1970s, the experience, knowledge, and institutional memory associated with these activities can be lost or forgotten easily as key DOE managers retire or leave the department. The guide seeks to assemble in a single reference some of the learning that has occurred through participation in IEA IAs as a guide for BTP managers currently responsible for IAs and for those who might consider entering into new IEA activities in the future.

  3. Urban energy management: a course on the administration of public energy programs. An instructor's guide

    Energy Technology Data Exchange (ETDEWEB)

    Mandelbaum, Dr., Len; Olsen, Dr., Marvin; Hyman, Dr., Barry; Sheridan, Mimi; Dahlberg, Judy; O' Brien, Jeremy

    1980-12-01

    The course provides local government administrators, staff, and students with the background knowledge to deal with a broad range of energy management concerns and is not to train technical energy conservation specialists. Section II contains the Instructor's Guide and Section III provides the Student Outlines and Handouts on the following subjects: The Energy Problem; National Energy Politics and Programs; State and Local Energy Programs; Techniques of Energy Planning; Techniques of Energy Conservation; Techniques of Renewable Energy Production; Strategies for Voluntary Energy Management; Strategies for Finan. Energy Management; and Strategies for Mandatory Energy Management. (MCW)

  4. Combustion of hydrogen-air jets in local chemical equilibrium: A guide to the CHARNAL computer program

    Science.gov (United States)

    Spalding, D. B.; Launder, B. E.; Morse, A. P.; Maples, G.

    1974-01-01

    A guide to a computer program, written in FORTRAN 4, for predicting the flow properties of turbulent mixing with combustion of a circular jet of hydrogen into a co-flowing stream of air is presented. The program, which is based upon the Imperial College group's PASSA series, solves differential equations for diffusion and dissipation of turbulent kinetic energy and also of the R.M.S. fluctuation of hydrogen concentration. The effective turbulent viscosity for use in the shear stress equation is computed. Chemical equilibrium is assumed throughout the flow.

  5. Advancing population ecology with integral projection models: a practical guide

    DEFF Research Database (Denmark)

    Merow, Cory; Dahlgren, Johan; Metcall, C. Jessica E.

    2014-01-01

    (e.g., environment). By combining regressions of vital rates, an IPM provides mechanistic insight into emergent ecological patterns such as population dynamics, species geographic distributions, or life history strategies. Here, we review important resources for building IPMs and provide...... of regression models. Many subtleties arise when scaling from vital rate regressions to population-level patterns, so we provide a set of diagnostics and guidelines to ensure that models are biologically plausible. Moreover, IPMs can exploit a large existing suite of analytical tools developed for Matrix...

  6. Mars Global Reference Atmospheric Model 2010 Version: Users Guide

    Science.gov (United States)

    Justh, H. L.

    2014-01-01

    This Technical Memorandum (TM) presents the Mars Global Reference Atmospheric Model 2010 (Mars-GRAM 2010) and its new features. Mars-GRAM is an engineering-level atmospheric model widely used for diverse mission applications. Applications include systems design, performance analysis, and operations planning for aerobraking, entry, descent and landing, and aerocapture. Additionally, this TM includes instructions on obtaining the Mars-GRAM source code and data files as well as running Mars-GRAM. It also contains sample Mars-GRAM input and output files and an example of how to incorporate Mars-GRAM as an atmospheric subroutine in a trajectory code.

  7. Offshore and coastal dispersion (OCD) model. Users guide

    International Nuclear Information System (INIS)

    Hanna, S.R.; Schulman, L.L.; Paine, R.J.; Pleim, J.E.

    1984-09-01

    The Offshore and Coastal Dispersion (OCD) model was adapted from the EPA guideline model MPTER to simulate the effect of offshore emissions from point sources in coastal regions. Modifications were made to incorporate overwater plume transport and dispersion as well as changes that occur as the plume crosses the shoreline. Hourly meteorological data are needed from overwater and overland locations. Turbulence intensities are used but are not mandatory. For overwater dispersion, the turbulence intensities are parameterized from boundary-layer similarity relationships if they are not measured. Specifications of emission characteristics and receptor locations are the same as for MPTER; 250 point sources and 180 receptors may be used

  8. Guiding and Modelling Quality Improvement in Higher Education Institutions

    Science.gov (United States)

    Little, Daniel

    2015-01-01

    The article considers the process of creating quality improvement in higher education institutions from the point of view of current organisational theory and social-science modelling techniques. The author considers the higher education institution as a functioning complex of rules, norms and other organisational features and reviews the social…

  9. Toolkit for Conceptual Modeling (TCM): User's Guide and Reference

    NARCIS (Netherlands)

    Dehne, F.; Wieringa, Roelf J.

    1997-01-01

    The Toolkit for Conceptual Modeling (TCM) is a suite of graphical editors for a number of graphical notation systems that are used in software specification methods. The notations can be used to represent the conceptual structure of the software - hence the name of the suite. This manual describes

  10. Modeling the shape hierarchy for visually guided grasping

    CSIR Research Space (South Africa)

    Rezai, O

    2014-10-01

    Full Text Available The monkey anterior intraparietal area (AIP) encodes visual information about three-dimensional object shape that is used to shape the hand for grasping. We modeled shape tuning in visual AIP neurons and its relationship with curvature and gradient...

  11. A simple tissue model for practicing ultrasound guided vascular ...

    African Journals Online (AJOL)

    Introduction: The use of ultrasound in anaesthetic practice continues to be more established and the use of ultrasound guidance in establishing vascular access is recommended by various groups. We have developed a tissue model for the practice and skills development in ultrasound vascular access. Method: The tissue ...

  12. Symmetry-guided large-scale shell-model theory

    Czech Academy of Sciences Publication Activity Database

    Launey, K. D.; Dytrych, Tomáš; Draayer, J. P.

    2016-01-01

    Roč. 89, JUL (2016), s. 101-136 ISSN 0146-6410 R&D Projects: GA ČR GA16-16772S Institutional support: RVO:61389005 Keywords : Ab intio shell-model theory * Symplectic symmetry * Collectivity * Clusters * Hoyle state * Orderly patterns in nuclei from first principles Subject RIV: BE - Theoretical Physics Impact factor: 11.229, year: 2016

  13. Guide for Operational Configuration Management Program including the adjunct programs of design reconstitution and material condition and aging management

    International Nuclear Information System (INIS)

    1993-11-01

    This standard presents program criteria and implementation guidance for an operational configuration management program for DOE nuclear and non-nuclear facilities in the operational phase. Portions of this standard are also useful for other DOE processes, activities, and programs. This Part 1 contains foreword, glossary, acronyms, bibliography, and Chapter 1 on operational configuration management program principles. Appendices are included on configuration management program interfaces, and background material and concepts for operational configuration management

  14. Transmission Line Jobs and Economic Development Impact (JEDI) Model User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, M.; Keyser, D.

    2013-10-01

    The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are freely available, user-friendly tools that estimate the potential economic impacts of constructing and operating power generation projects for a range of conventional and renewable energy technologies. The Transmission Line JEDI model can be used to field questions about the economic impacts of transmission lines in a given state, region, or local community. This Transmission Line JEDI User Reference Guide was developed to provide basic instruction on operating the model and understanding the results. This guide also provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data contained in the model.

  15. WebQuests for Reflection and Conceptual Change: Variations on a Popular Model for Guided Inquiry.

    Science.gov (United States)

    Young, David L.; Wilson, Brent G.

    WebQuests have become a popular form of guided inquiry using Web resources. The goal of WebQuests is to help students think and reason at higher levels,and use information to solve problems. This paper presents modifications to the WebQuest model drawing on primarily on schema theory. It is believed that these changes will further enhance student…

  16. Analyzing empowerment oriented email consultation for parents : Development of the Guiding the Empowerment Process model

    NARCIS (Netherlands)

    dr. Christa C.C. Nieuwboer

    2014-01-01

    Background. Online consultation is increasingly offered by parenting practitioners, but it is not clear if it is feasible to provide empowerment oriented support in single session email consultation. Method. Based on empowerment theory we developed the Guiding the Empowerment Process model (GEP

  17. Designing a bone health and soy focus group discussion guide based on the health belief model

    Science.gov (United States)

    Focus groups were used to assess the knowledge and skills of women in order to support curricula development. The Health Belief Model was applied to the discussion guide to enhance focus group findings and applications. Constructs related to perceived susceptibility, severity, benefits, and barriers...

  18. Predictive models in cancer management: A guide for clinicians.

    Science.gov (United States)

    Kazem, Mohammed Ali

    2017-04-01

    Predictive tools in cancer management are used to predict different outcomes including survival probability or risk of recurrence. The uptake of these tools by clinicians involved in cancer management has not been as common as other clinical tools, which may be due to the complexity of some of these tools or a lack of understanding of how they can aid decision-making in particular clinical situations. The aim of this article is to improve clinicians' knowledge and understanding of predictive tools used in cancer management, including how they are built, how they can be applied to medical practice, and what their limitations may be. Literature review was conducted to investigate the role of predictive tools in cancer management. All predictive models share similar characteristics, but depending on the type of the tool its ability to predict an outcome will differ. Each type has its own pros and cons, and its generalisability will depend on the cohort used to build the tool. These factors will affect the clinician's decision whether to apply the model to their cohort or not. Before a model is used in clinical practice, it is important to appreciate how the model is constructed, what its use may add over and above traditional decision-making tools, and what problems or limitations may be associated with it. Understanding all the above is an important step for any clinician who wants to decide whether or not use predictive tools in their practice. Copyright © 2016 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

  19. Modelling the shape hierarchy for visually guided grasping

    Directory of Open Access Journals (Sweden)

    Omid eRezai

    2014-10-01

    Full Text Available The monkey anterior intraparietal area (AIP encodes visual information about three-dimensional object shape that is used to shape the hand for grasping. We modelled shape tuning in visual AIP neurons and its relationship with curvature and gradient information from the caudal intraparietal area (CIP. The main goal was to gain insight into the kinds of shape parameterizations that can account for AIP tuning and that are consistent with both the inputs to AIP and the role of AIP in grasping. We first experimented with superquadric shape parameters. We considered superquadrics because they occupy a role in robotics that is similar to AIP, in that superquadric fits are derived from visual input and used for grasp planning. We also experimented with an alternative shape parameterization that was based on an Isomap dimension reduction of spatial derivatives of depth (i.e. distance from the observer to the object surface. We considered an Isomap-based model because its parameters lacked discontinuities between similar shapes. When we matched the dimension of the Isomap to the number of superquadric parameters, the superquadric model fit the AIP data somewhat more closely. However, higher-dimensional Isomaps provided excellent fits. Also, we found that the Isomap parameters could be approximated much more accurately than superquadric parameters by feedforward neural networks with CIP-like inputs. We conclude that Isomaps, or perhaps alternative dimension reductions of visual inputs to AIP, provide a promising model of AIP electrophysiology data. However (in contrast with superquadrics further work is needed to test whether such shape parameterizations actually provide an effective basis for grasp control.

  20. Python Program to Select HII Region Models

    Science.gov (United States)

    Miller, Clare; Lamarche, Cody; Vishwas, Amit; Stacey, Gordon J.

    2016-01-01

    HII regions are areas of singly ionized Hydrogen formed by the ionizing radiaiton of upper main sequence stars. The infrared fine-structure line emissions, particularly Oxygen, Nitrogen, and Neon, can give important information about HII regions including gas temperature and density, elemental abundances, and the effective temperature of the stars that form them. The processes involved in calculating this information from observational data are complex. Models, such as those provided in Rubin 1984 and those produced by Cloudy (Ferland et al, 2013) enable one to extract physical parameters from observational data. However, the multitude of search parameters can make sifting through models tedious. I digitized Rubin's models and wrote a Python program that is able to take observed line ratios and their uncertainties and find the Rubin or Cloudy model that best matches the observational data. By creating a Python script that is user friendly and able to quickly sort through models with a high level of accuracy, this work increases efficiency and reduces human error in matching HII region models to observational data.

  1. Cross-link guided molecular modeling with ROSETTA.

    Directory of Open Access Journals (Sweden)

    Abdullah Kahraman

    Full Text Available Chemical cross-links identified by mass spectrometry generate distance restraints that reveal low-resolution structural information on proteins and protein complexes. The technology to reliably generate such data has become mature and robust enough to shift the focus to the question of how these distance restraints can be best integrated into molecular modeling calculations. Here, we introduce three workflows for incorporating distance restraints generated by chemical cross-linking and mass spectrometry into ROSETTA protocols for comparative and de novo modeling and protein-protein docking. We demonstrate that the cross-link validation and visualization software Xwalk facilitates successful cross-link data integration. Besides the protocols we introduce XLdb, a database of chemical cross-links from 14 different publications with 506 intra-protein and 62 inter-protein cross-links, where each cross-link can be mapped on an experimental structure from the Protein Data Bank. Finally, we demonstrate on a protein-protein docking reference data set the impact of virtual cross-links on protein docking calculations and show that an inter-protein cross-link can reduce on average the RMSD of a docking prediction by 5.0 Å. The methods and results presented here provide guidelines for the effective integration of chemical cross-link data in molecular modeling calculations and should advance the structural analysis of particularly large and transient protein complexes via hybrid structural biology methods.

  2. A Guide for the Management of Special Education Programs. 3.0 Educational Simulations. Newday Operations Guide for Drug Dependent Minor Programs.

    Science.gov (United States)

    Santa Cruz County Superintendent of Schools, CA.

    Presented is the third component, Educational Simulations, of a special day class educational program for drug dependent minors. One objective of the project is said to have been the identification of instructional methods and materials suited to drug dependent minors. Educational games and simulations designed to provide practice in reading and…

  3. A computational fluid dynamics modeling study of guide walls for downstream fish passage

    Science.gov (United States)

    Mulligan, Kevin; Towler, Brett; Haro, Alexander J.; Ahlfeld, David P.

    2017-01-01

    A partial-depth, impermeable guidance structure (or guide wall) for downstream fish passage is typically constructed as a series of panels attached to a floating boom and anchored across a water body (e.g. river channel, reservoir, or power canal). The downstream terminus of the wall is generally located nearby to a fish bypass structure. If guidance is successful, the fish will avoid entrainment in a dangerous intake structure (i.e. turbine intakes) while passing from the headpond to the tailwater of a hydroelectric facility through a safer passage route (i.e. the bypass). The goal of this study is to determine the combination of guide wall design parameters that will most likely increase the chance of surface-oriented fish being successfully guided to the bypass. To evaluate the flow field immediately upstream of a guide wall, a parameterized computational fluid dynamics model of an idealized power canal was constructed in © ANSYS Fluent v 14.5 (ANSYS Inc., 2012). The design parameters investigated were the angle and depth of the guide wall and the average approach velocity in the power canal. Results call attention to the importance of the downward to sweeping flow ratio and demonstrate how a change in guide wall depth and angle can affect this important hydraulic cue to out-migrating fish. The key findings indicate that a guide wall set at a small angle (15° is the minimum in this study) and deep enough such that sweeping flow dominant conditions prevail within the expected vertical distribution of fish approaching the structure will produce hydraulic conditions that are more likely to result in effective passage.

  4. LISA package user guide. Part II: LISA (Long Term Isolation Safety Assessment) program description and user guide

    International Nuclear Information System (INIS)

    Prado, P.; Saltelli, A.; Homma, T.

    1992-01-01

    This manual is subdivided into three parts. In this second part, this document describes the LISA (Long term Isolation Safety Assessment) Code and its submodels. LISA is a tool for analysis of the safety of an underground disposal of nuclear waste. It has the capability to handle nuclide chain of arbitrary length and to evaluate the migration of nuclide through a geosphere medium composed of an arbitrary number of segments. LISA makes use of Monte Carlo methodology to evaluate the uncertainty in the quantity being assessed (eg dose) arising from the uncertainty in the model input parameters. In the present version LISA is equipped with a very simple source term submodel, a relatively complex geosphere and a simplified biosphere. The code is closely associated with its statistical pre-processor code (PREP), which generates the input Monte Carlo sample from the assigned parameter probability density functions and with its post-processor code (SPOP) which provides useful statistics on the output sample (uncertainty and sensitivity analysis). This report describes the general structure of LISA, its subroutines and submodels, the code input ant output files. It is intended to provide the user with enough information to know and run the code as well as the capacity to incorporate different submodels. 15 refs., 6 figs

  5. Programming for adults a guide for small- and medium-sized libraries

    CERN Document Server

    Ranier, Raymond

    2005-01-01

    This book addresses all aspects of the programming process, from idea to execution, from crafts and entertainment to film, arts and science. Included are sources of funding, contracts and agreements, programming to meet the library's mission, and program evaluation.

  6. LDA-Based Unified Topic Modeling for Similar TV User Grouping and TV Program Recommendation.

    Science.gov (United States)

    Pyo, Shinjee; Kim, Eunhui; Kim, Munchurl

    2015-08-01

    Social TV is a social media service via TV and social networks through which TV users exchange their experiences about TV programs that they are viewing. For social TV service, two technical aspects are envisioned: grouping of similar TV users to create social TV communities and recommending TV programs based on group and personal interests for personalizing TV. In this paper, we propose a unified topic model based on grouping of similar TV users and recommending TV programs as a social TV service. The proposed unified topic model employs two latent Dirichlet allocation (LDA) models. One is a topic model of TV users, and the other is a topic model of the description words for viewed TV programs. The two LDA models are then integrated via a topic proportion parameter for TV programs, which enforces the grouping of similar TV users and associated description words for watched TV programs at the same time in a unified topic modeling framework. The unified model identifies the semantic relation between TV user groups and TV program description word groups so that more meaningful TV program recommendations can be made. The unified topic model also overcomes an item ramp-up problem such that new TV programs can be reliably recommended to TV users. Furthermore, from the topic model of TV users, TV users with similar tastes can be grouped as topics, which can then be recommended as social TV communities. To verify our proposed method of unified topic-modeling-based TV user grouping and TV program recommendation for social TV services, in our experiments, we used real TV viewing history data and electronic program guide data from a seven-month period collected by a TV poll agency. The experimental results show that the proposed unified topic model yields an average 81.4% precision for 50 topics in TV program recommendation and its performance is an average of 6.5% higher than that of the topic model of TV users only. For TV user prediction with new TV programs, the average

  7. Alcohol Abuse Prevention: A Comprehensive Guide for Youth Organizations.

    Science.gov (United States)

    Boys' Clubs of America, New York, NY.

    This guide, the culmination of a three year Project TEAM effort by the Boys' Clubs of America, describes numerous strategies for developing an alcohol abuse prevention program. The core of this guide consists of program models developed by the Boys' Club project at seven pilot sites. The models presented cover the following areas: peer leadership,…

  8. Unified Program Design: Organizing Existing Programming Models, Delivery Options, and Curriculum

    Science.gov (United States)

    Rubenstein, Lisa DaVia; Ridgley, Lisa M.

    2017-01-01

    A persistent problem in the field of gifted education has been the lack of categorization and delineation of gifted programming options. To address this issue, we propose Unified Program Design as a structural framework for gifted program models. This framework defines gifted programs as the combination of delivery methods and curriculum models.…

  9. Program Partitioning using Dynamic Trust Models

    DEFF Research Database (Denmark)

    Søndergaard, Dan; Probst, Christian W.; Jensen, Christian D.

    2006-01-01

    Developing distributed applications is a difficult task. It is further complicated if system-wide security policies shall be specified and enforced, or if both data and hosts are owned by principals that do not fully trust each other, as is typically the case in service-oriented or grid-based sce......Developing distributed applications is a difficult task. It is further complicated if system-wide security policies shall be specified and enforced, or if both data and hosts are owned by principals that do not fully trust each other, as is typically the case in service-oriented or grid......-based scenarios. Language-based technologies have been suggested to support developers of those applications---the \\$\\backslash\\$emph{Decentralized Label Model} and \\$\\backslash\\$emph{Secure Program Partitioning} allow to annotate programs with security specifications, and to partition the annotated program...... across a set of hosts, obeying both the annotations and the trust relation between the principals. The resulting applications guarantee \\$\\backslash\\$emph{by construction} that safety and confidentiality of both data and computations are ensured. In this work, we develop a generalised version...

  10. Use of the FAR Guide to Present a Pedagogical Analogical Model of Gel Electrophoresis in Year 10 Science

    Science.gov (United States)

    Davis, James

    2013-01-01

    This paper is a qualitative, practice based study describing the use of the Focus-Action-Reflection (FAR) Guide (Harrison & Treagust, 2000) to address the shortcomings of a pedagogical analogical model in Year 10 Science. The aim of this paper is to present my experience of the FAR Guide in relation to an analogical model that gave rise to…

  11. Finite element modeling of guided wave scattering at delaminations in composite panels

    Science.gov (United States)

    Murat, B. I. S.; Fromme, P.

    2016-04-01

    Carbon fiber laminate composites, consisting of layers of polymer matrix reinforced with high strength carbon fibers, are increasingly employed for aerospace structures. They offer advantages for aerospace applications, e.g., good strength to weight ratio. However, impact during the operation and servicing of the aircraft can lead to barely visible and difficult to detect damage. Depending on the severity of the impact, delaminations can occur, reducing the load carrying capacity of the structure. Efficient structural health monitoring of composite panels can be achieved using guided ultrasonic waves propagating along the structure. The guided ultrasonic wave (A0 Lamb wave mode) scattering at delaminations was modelled using full three-dimensional Finite Element (FE) simulations. The influence of the delamination size was systematically investigated from a parameter study. The angular dependency of the scattered guided wave amplitude was calculated using a baseline subtraction method. A significant influence of the delamination width on the guided wave scattering was found. The sensitivity of guided waves for the detection of barely visible impact damage in composite panels has been predicted.

  12. Programmer's guide to the Argonne Coal Market Model. [USA; mathematical models

    Energy Technology Data Exchange (ETDEWEB)

    Guziel, K.A.; Krohm, G.C.; VanKuiken, J.C.; Macal, C.M.

    1980-02-01

    The Argonne Coal Market Model was developed as part of a comprehensive DOE study of coal-related environmental, health, and safety impacts. The model includes a high degree of regional detail on both supply and demand. Coal demand is input separately for industrial and utility users in each region, and coal supply in each region is characterized by a linearly increasing function relating increments of new mine capacity to the marginal cost of extraction. Rail transportation costs and control technology costs are estimated for each supply-demand link. A quadratic programming algorithm is used to optimize flow patterns for the system. This report documents the model for programmers and users interested in technical details of the computer code.

  13. GCFM Users Guide Revision for Model Version 5.0

    Energy Technology Data Exchange (ETDEWEB)

    Keimig, Mark A.; Blake, Coleman

    1981-08-10

    This paper documents alterations made to the MITRE/DOE Geothermal Cash Flow Model (GCFM) in the period of September 1980 through September 1981. Version 4.0 of GCFM was installed on the computer at the DOE San Francisco Operations Office in August 1980. This Version has also been distributed to about a dozen geothermal industry firms, for examination and potential use. During late 1980 and 1981, a few errors detected in the Version 4.0 code were corrected, resulting in Version 4.1. If you are currently using GCFM Version 4.0, it is suggested that you make the changes to your code that are described in Section 2.0. User's manual changes listed in Section 3.0 and Section 4.0 should then also be made.

  14. Jobs and Economic Development Impact (JEDI) Model: Offshore Wind User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, E.; Goldberg, M.; Keyser, D.

    2013-06-01

    The Offshore Wind Jobs and Economic Development Impact (JEDI) model, developed by NREL and MRG & Associates, is a spreadsheet based input-output tool. JEDI is meant to be a user friendly and transparent tool to estimate potential economic impacts supported by the development and operation of offshore wind projects. This guide describes how to use the model as well as technical information such as methodology, limitations, and data sources.

  15. A preoperative mathematic model for computed tomographic guided microwave ablation treatment of hepatic dome tumors.

    Science.gov (United States)

    Gao, Fei; Wang, Guo-Bao; Xiang, Zhan-Wang; Yang, Bin; Xue, Jing-Bing; Mo, Zhi-Qiang; Zhong, Zhi-Hui; Zhang, Tao; Zhang, Fu-Jun; Fan, Wei-Jun

    2016-05-03

    This study sought to prospectively evaluate the feasibility and safety of a preoperative mathematic model for computed tomographic(CT) guided microwave(MW) ablation treatment of hepatic dome tumors. This mathematic model was a regular cylinder quantifying appropriate puncture routes from the bottom up. A total of 103 patients with hepatic dome tumors were enrolled and randomly divided into 2 groups based on whether this model was used or not: Group A (using the model; n = 43) versus Group B (not using the model; n = 60). All tumors were treated by CT-guided MW ablation and follow-up contrast CT were reviewed. The average number of times for successful puncture, average ablation time, and incidence of right shoulder pain were less in Group A than Group B (1.4 vs. 2.5, P = 0.001; 8.8 vs. 11.1 minutes, P = 0.003; and 4.7% vs. 20%, P = 0.039). The technical success rate was higher in Group A than Group B (97.7% vs. 85.0%, P = 0.032). There were no significant differences between the two groups in primary and secondary technique efficacy rates (97.7% vs. 88.3%, P = 0.081; 90.0% vs. 72.7%, P = 0.314). No major complications occurred in both groups. The mathematic model of regular cylinder is feasible and safe for CT-guided MW ablation in treating hepatic dome tumors.

  16. FROM ADAPTATION-GUIDED RETRIEVAL TO REUSE-GUIDED RETRIEVAL: APPLICATION TO CASE RETRIEVAL NET MEMORY MODEL

    OpenAIRE

    NABILA NOUAOURIA; MOUNIR BOUKADOUM

    2013-01-01

    In Case-Based Reasoning (CBR), case retrieval is generally guided by similarity. However, the most similar case may not be the easiest one to reuse (hard to adapt). As recommended by Smyth and Keane, it might be more efficient to use an adaptability criterion to guide the retrieval process (adaptation-guided retrieval or AGR). In the same trend but with the goal of optimizing case reuse, our approach is to consider what is similar to copy and what is different to adapt during the retrieval st...

  17. The information systems security officer's guide establishing and managing an information protection program

    CERN Document Server

    Kovacich, Gerald L

    2003-01-01

    Information systems security continues to grow and change based on new technology and Internet usage trends. In order to protect your organization's confidential information, you need information on the latest trends and practical advice from an authority you can trust. The new ISSO Guide is just what you need. Information Systems Security Officer's Guide, Second Edition, from Gerald Kovacich has been updated with the latest information and guidance for information security officers. It includes more information on global changes and threats, managing an international information secur

  18. An ecological model of workplace bullying: a guide for intervention and research.

    Science.gov (United States)

    Johnson, Susan L

    2011-01-01

    The origins and outcomes of workplace bullying can be understood through the use of a conceptual model which is based on the ecological perspective. This model portrays the work environment as a series of nested, interconnected layers that exist within society as a whole. These layers are society (macrosystem), the corporation (exosystem), the co-workers and managers of the bully and target (mesosystem), and the bully and target (microsystem). Workplace bullying does not occur in isolation. Elements at each of these levels serve as antecedents to bullying, and the outcomes of bullying are manifested at each of these levels. These antecedents and outcomes need to be considered when developing interventions that target workplace bullying. The model can be used as a theoretical framework to guide intervention planning and evaluation, and can also be used to guide the formulation of questions for empirical research. © 2011 Wiley Periodicals, Inc.

  19. A model-guided symbolic execution approach for network protocol implementations and vulnerability detection.

    Directory of Open Access Journals (Sweden)

    Shameng Wen

    Full Text Available Formal techniques have been devoted to analyzing whether network protocol specifications violate security policies; however, these methods cannot detect vulnerabilities in the implementations of the network protocols themselves. Symbolic execution can be used to analyze the paths of the network protocol implementations, but for stateful network protocols, it is difficult to reach the deep states of the protocol. This paper proposes a novel model-guided approach to detect vulnerabilities in network protocol implementations. Our method first abstracts a finite state machine (FSM model, then utilizes the model to guide the symbolic execution. This approach achieves high coverage of both the code and the protocol states. The proposed method is implemented and applied to test numerous real-world network protocol implementations. The experimental results indicate that the proposed method is more effective than traditional fuzzing methods such as SPIKE at detecting vulnerabilities in the deep states of network protocol implementations.

  20. A model-guided symbolic execution approach for network protocol implementations and vulnerability detection.

    Science.gov (United States)

    Wen, Shameng; Meng, Qingkun; Feng, Chao; Tang, Chaojing

    2017-01-01

    Formal techniques have been devoted to analyzing whether network protocol specifications violate security policies; however, these methods cannot detect vulnerabilities in the implementations of the network protocols themselves. Symbolic execution can be used to analyze the paths of the network protocol implementations, but for stateful network protocols, it is difficult to reach the deep states of the protocol. This paper proposes a novel model-guided approach to detect vulnerabilities in network protocol implementations. Our method first abstracts a finite state machine (FSM) model, then utilizes the model to guide the symbolic execution. This approach achieves high coverage of both the code and the protocol states. The proposed method is implemented and applied to test numerous real-world network protocol implementations. The experimental results indicate that the proposed method is more effective than traditional fuzzing methods such as SPIKE at detecting vulnerabilities in the deep states of network protocol implementations.

  1. Comparison of Mathematical Resilience among Students with Problem Based Learning and Guided Discovery Learning Model

    Science.gov (United States)

    Hafiz, M.; Darhim; Dahlan, J. A.

    2017-09-01

    Mathematical resilience is very important thing in learning mathematics. It is a positive attitude in order to make student not easily give up in the face of adversity when solving mathematics problems through discussion and research about mathematics. The purpose of this study was to examine comparison of mathematical resilience among students receiving problem based learning model and the students who received guided discovery learning model. This research was conducted at one junior high school in Jakarta. The method was used in this study is quasi-experimental with 66 students as the samples. The instrument which was used in this research is mathematical resilience scale with 24 items of statements. The result of this research is mathematical resilience between the students who received problem based learning model is better than the students who received guided discovery learning model. According to this study result the authors presented some suggestions that: 1) problem based learning and guided discovery learning model can both develop mathematical resilience, but problem based learning is more recommended to use, 2) in order to achieve mathematical resilience better than this findings, it needs to do the next research that combine problem based learning with other treatment.

  2. Keys to the House: Unlocking Residential Savings With Program Models for Home Energy Upgrades

    Energy Technology Data Exchange (ETDEWEB)

    Grevatt, Jim [Energy Futures Group (United States); Hoffman, Ian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hoffmeyer, Dale [US Department of Energy, Washington, DC (United States)

    2017-07-05

    After more than 40 years of effort, energy efficiency program administrators and associated contractors still find it challenging to penetrate the home retrofit market, especially at levels commensurate with state and federal goals for energy savings and emissions reductions. Residential retrofit programs further have not coalesced around a reliably successful model. They still vary in design, implementation and performance, and they remain among the more difficult and costly options for acquiring savings in the residential sector. If programs are to contribute fully to meeting resource and policy objectives, administrators need to understand what program elements are key to acquiring residential savings as cost effectively as possible. To that end, the U.S. Department of Energy (DOE) sponsored a comprehensive review and analysis of home energy upgrade programs with proven track records, focusing on those with robustly verified savings and constituting good examples for replication. The study team reviewed evaluations for the period 2010 to 2014 for 134 programs that are funded by customers of investor-owned utilities. All are programs that promote multi-measure retrofits or major system upgrades. We paid particular attention to useful design and implementation features, costs, and savings for nearly 30 programs with rigorous evaluations of performance. This meta-analysis describes program models and implementation strategies for (1) direct install retrofits; (2) heating, ventilating and air-conditioning (HVAC) replacement and early retirement; and (3) comprehensive, whole-home retrofits. We analyze costs and impacts of these program models, in terms of both energy savings and emissions avoided. These program models can be useful guides as states consider expanding their strategies for acquiring energy savings as a resource and for emissions reductions. We also discuss the challenges of using evaluations to create program models that can be confidently applied in

  3. User's guide to program MAD: a computer program for the organization and manipulation of magnetic tape directories

    International Nuclear Information System (INIS)

    Gray, W.H.

    1979-05-01

    MAD is a computer program for the organization and manipulation of the information contained in magnetic tape directories. Program MAD creates, updates, and interrogates a set of four random access files collectively called the MAD unified data base. Although program MAD was originally intended as an information compression mechanism, it has evolved into an organization system with the added feature of an approximately 60% reduction in the space required to store the data. This program is easy to use, relatively fast, efficient in its use of disk space, and available to all users of the Fusion Energy Division DECsystem-10

  4. A Computer Oriented Problem Solving Unit, Consume. Student Guide. Computer Technology Program Environmental Education Units.

    Science.gov (United States)

    Northwest Regional Educational Lab., Portland, OR.

    This is the student guide in a set of five computer-oriented environmental/energy education units. Contents are organized into the following parts or lessons: (1) introduction to power and energy; (2) energy consumption and supply; (3) energy conservation and distribution; (4) energy flow and the question of transportation; and (5) computer models…

  5. K9 Buddies: A Program of Guide Dogs for the Blind

    Science.gov (United States)

    Ritter, Joanne

    2007-01-01

    Today, exceptional dogs that have been specially bred and socialized are paired with children who are blind or visually impaired. These dogs, called "K9 Buddies," are from Guide Dogs for the Blind, a national nonprofit organization with a mission to offer skilled mobility dogs and training free-of-charge to adults with visual impairments…

  6. 76 FR 46841 - Certain Products Containing Interactive Program Guides and Parental Controls Technology; Notice...

    Science.gov (United States)

    2011-08-03

    ... Rovi Corp. (f/k/a Macrovision Solutions Corp.) of Santa Clara, California; its wholly- owned subsidiary..., California; and Rovi Guides' wholly-owned subsidiaries United Video Properties of Santa Clara, California... subsidiaries Toshiba America, Inc. of New York, New York; Toshiba America Consumer Products, LLC of Wayne, New...

  7. Programa de lengua espanola: Guia para el profesor, 1 (Spanish Language Program; Teacher's Guide 1).

    Science.gov (United States)

    Martinez, Emiliano; And Others

    This teacher's guide is designed for use with the following textbooks in the Spanish language reading series: "Mira,""Mira y Lee,""Lee y Trabaja," and "Trabaja y Aprende." It contains lesson plans for each text and illustrations from the books themselves. (SK)

  8. Programa de lengua espanola: Guia para el profesor, 2 (Spanish Language Program: Teacher's Guide 2).

    Science.gov (United States)

    Martinez, Emiliano; And Others

    This teacher's guide is designed for use with "La Ciudad" and "Otros Amigos, Otras Culturas," two textbooks in the second part of the Spanish language series of readers. It contains lesson plans to enable the teacher to make better use of the texts and includes illustrations taken from each of the books themselves. (SK)

  9. Operation of Wastewater Treatment Plants: A Field Study Training Program. Volume I, Instructor's Guide. Second Edition.

    Science.gov (United States)

    California State Univ., Sacramento. Dept. of Civil Engineering.

    The objective of this instructor's guide is to help provide students with knowledge and skills for employment in the field of wastewater treatment. Included in each chapter outline are: (1) objectives, (2) instructional approach, (3) answers to the objective test in the student's text, and (4) an explanation of these answers. The material…

  10. Operation of Wastewater Treatment Plants: A Field Study Training Program. Volume III, Instructor's Guide. Second Edition.

    Science.gov (United States)

    California State Univ., Sacramento. Dept. of Civil Engineering.

    The objective of this instructor's guide is to help provide students with knowledge and skills for employment in the field of wastewater treatment. Included in each chapter outline are: (1) objectives, (2) instructional approach, (3) answers to the objective test in the student's text, and (4) an explanation of these answers. The material…

  11. Operation of Wastewater Treatment Plants: A Field Study Training Program. Volume II, Instructor's Guide. Second Edition.

    Science.gov (United States)

    California State Univ., Sacramento. Dept. of Civil Engineering.

    The objective of this instructor's guide is to help provide students with knowledge and skills for employment in the field of wastewater treatment. Included in each chapter outline are: (1) objectives, (2) instructional approach, (3) answers to the objective test in the student's text, and (4) an explanation of these answers. The material…

  12. Solar Powering Your Community: A Guide for Local Governments, (Revised) August 2009

    Energy Technology Data Exchange (ETDEWEB)

    2009-08-01

    DOE has developed this guide to help local governments design and implement local solar plans. This guide includes examples and models tested in cities. Many of the examples are results of DOE's Solar America Cities Program.

  13. Human factors engineering program review model

    International Nuclear Information System (INIS)

    1994-07-01

    The staff of the Nuclear Regulatory Commission is performing nuclear power plant design certification reviews based on a design process plan that describes the human factors engineering (HFE) program elements that are necessary and sufficient to develop an acceptable detailed design specification and an acceptable implemented design. There are two principal reasons for this approach. First, the initial design certification applications submitted for staff review did not include detailed design information. Second, since human performance literature and industry experiences have shown that many significant human factors issues arise early in the design process, review of the design process activities and results is important to the evaluation of an overall design. However, current regulations and guidance documents do not address the criteria for design process review. Therefore, the HFE Program Review Model (HFE PRM) was developed as a basis for performing design certification reviews that include design process evaluations as well as review of the final design. A central tenet of the HFE PRM is that the HFE aspects of the plant should be developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The HFE PRM consists of ten component elements. Each element in divided into four sections: Background, Objective, Applicant Submittals, and Review Criteria. This report describes the development of the HFE PRM and gives a detailed description of each HFE review element

  14. Human factors engineering program review model

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The staff of the Nuclear Regulatory Commission is performing nuclear power plant design certification reviews based on a design process plan that describes the human factors engineering (HFE) program elements that are necessary and sufficient to develop an acceptable detailed design specification and an acceptable implemented design. There are two principal reasons for this approach. First, the initial design certification applications submitted for staff review did not include detailed design information. Second, since human performance literature and industry experiences have shown that many significant human factors issues arise early in the design process, review of the design process activities and results is important to the evaluation of an overall design. However, current regulations and guidance documents do not address the criteria for design process review. Therefore, the HFE Program Review Model (HFE PRM) was developed as a basis for performing design certification reviews that include design process evaluations as well as review of the final design. A central tenet of the HFE PRM is that the HFE aspects of the plant should be developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The HFE PRM consists of ten component elements. Each element in divided into four sections: Background, Objective, Applicant Submittals, and Review Criteria. This report describes the development of the HFE PRM and gives a detailed description of each HFE review element.

  15. Neural Network Program Package for Prosody Modeling

    Directory of Open Access Journals (Sweden)

    J. Santarius

    2004-04-01

    Full Text Available This contribution describes the programme for one part of theautomatic Text-to-Speech (TTS synthesis. Some experiments (for example[14] documented the considerable improvement of the naturalness ofsynthetic speech, but this approach requires completing the inputfeature values by hand. This completing takes a lot of time for bigfiles. We need to improve the prosody by other approaches which useonly automatically classified features (input parameters. Theartificial neural network (ANN approach is used for the modeling ofprosody parameters. The program package contains all modules necessaryfor the text and speech signal pre-processing, neural network training,sensitivity analysis, result processing and a module for the creationof the input data protocol for Czech speech synthesizer ARTIC [1].

  16. Teaching model of problem solving Programming Fundamentals

    Directory of Open Access Journals (Sweden)

    Iván Darwin Tutillo-Arcentales

    2016-10-01

    Full Text Available The formation process has been studied by several authors in those last years, although not always focusing in the technology careers which requires of a pedagogical and didactic point of view, which promotes behaviouring changes in the teachers with impact in the quality of graduates. The purposes of this paper is: to value the pedagogical fundamentals of the formation in the career Analysis of systems,in order to promote qualitative and quantitative improvements  in the students learning. The questioner applied to students and teachers proved the difficulties in the contents related to the algorithmic procedures, which constitutes a necessary content in their formation and to them contributes other syllabus of the first level. So it is necessary to model a theoretical construction which express the new relationships established from the psychological and didactic point of view in order to solving those situations from the programing.

  17. Generalized data stacking programming model with applications

    Directory of Open Access Journals (Sweden)

    Hala Samir Elhadidy

    2016-09-01

    Full Text Available Recent researches have shown that, everywhere in various sciences the systems are following stacked-based stored change behavior when subjected to events or varying environments “on and above” their normal situations. This paper presents a generalized data stack programming (GDSP model which is developed to describe the system changes under varying environment. These changes which are captured with different ways such as sensor reading are stored in matrices. Extraction algorithm and identification technique are proposed to extract the different layers between images and identify the stack class the object follows; respectively. The general multi-stacking network is presented including the interaction between various stack-based layering of some applications. The experiments prove that the concept of stack matrix gives average accuracy of 99.45%.

  18. Modeling Weather Impact on Ground Delay Programs

    Science.gov (United States)

    Wang, Yao; Kulkarni, Deepak

    2011-01-01

    Scheduled arriving aircraft demand may exceed airport arrival capacity when there is abnormal weather at an airport. In such situations, Federal Aviation Administration (FAA) institutes ground-delay programs (GDP) to delay flights before they depart from their originating airports. Efficient GDP planning depends on the accuracy of prediction of airport capacity and demand in the presence of uncertainties in weather forecast. This paper presents a study of the impact of dynamic airport surface weather on GDPs. Using the National Traffic Management Log, effect of weather conditions on the characteristics of GDP events at selected busy airports is investigated. Two machine learning methods are used to generate models that map the airport operational conditions and weather information to issued GDP parameters and results of validation tests are described.

  19. Users guide for the hydroacoustic coverage assessment model (HydroCAM)

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, T., LLNL

    1997-12-01

    A model for predicting the detection and localization performance of hydroacoustic monitoring networks has been developed. The model accounts for major factors affecting global-scale acoustic propagation in the ocean. including horizontal refraction, travel time variability due to spatial and temporal fluctuations in the ocean, and detailed characteristics of the source. Graphical user interfaces are provided to setup the models and visualize the results. The model produces maps of network detection coverage and localization area of uncertainty, as well as intermediate results such as predicted path amplitudes, travel time and travel time variance. This Users Guide for the model is organized into three sections. First a summary of functionality available in the model is presented, including example output products. The second section provides detailed descriptions of each of models contained in the system. The last section describes how to run the model, including a summary of each data input form in the user interface.

  20. Parametrically Guided Generalized Additive Models with Application to Mergers and Acquisitions Data.

    Science.gov (United States)

    Fan, Jianqing; Maity, Arnab; Wang, Yihui; Wu, Yichao

    2013-01-01

    Generalized nonparametric additive models present a flexible way to evaluate the effects of several covariates on a general outcome of interest via a link function. In this modeling framework, one assumes that the effect of each of the covariates is nonparametric and additive. However, in practice, often there is prior information available about the shape of the regression functions, possibly from pilot studies or exploratory analysis. In this paper, we consider such situations and propose an estimation procedure where the prior information is used as a parametric guide to fit the additive model. Specifically, we first posit a parametric family for each of the regression functions using the prior information (parametric guides). After removing these parametric trends, we then estimate the remainder of the nonparametric functions using a nonparametric generalized additive model, and form the final estimates by adding back the parametric trend. We investigate the asymptotic properties of the estimates and show that when a good guide is chosen, the asymptotic variance of the estimates can be reduced significantly while keeping the asymptotic variance same as the unguided estimator. We observe the performance of our method via a simulation study and demonstrate our method by applying to a real data set on mergers and acquisitions.

  1. Development of a Postnatal Educational Program for Breastfeeding Mothers in Community Settings: Intervention Mapping a useful guide

    DEFF Research Database (Denmark)

    Kronborg, Hanne; Kok, Gerjo

    2011-01-01

    in producing enough milk, and handle breastfeeding problems. Theory-based methods—such as individualization, skills training with guided practice, reattribution, planning coping responses, and mobilizing social support—were built into a health visitor–delivered program. An 18-hour training course addressed...... most often occurred in the first weeks among mothers with low selfefficacy, low confidence, or limited previous breastfeeding experience. Besides learning effective breastfeeding techniques, mothers needed to learn how to recognize their baby’s cues, let the baby regulate meals, gain confidence...

  2. Building and implementing a security certification and accreditation program official (ISC)2 guide to the CAPCM CBK

    CERN Document Server

    Howard, Patrick D

    2004-01-01

    Building and Implementing a Security Certification and Accreditation Program: Official (ISC)2 Guide to the CAP CBK demonstrates the practicality and effectiveness of certification and accreditation (C&A) as a risk management methodology for IT systems in both public and private organizations. It provides security professionals with an overview of C&A components, enabling them to document the status of the security controls of their IT systems, and learn how to secure systems via standard, repeatable processes.  This book consists of four main sections. It begins with a description of what it

  3. Tribal CCDF Guide to "Financial Management, Grants Administration, and Program Accountability"

    Science.gov (United States)

    Child Care Bureau, 2009

    2009-01-01

    Tribal managers and staff working with Federal grants must be fully knowledgeable of all applicable Federal requirements and skilled in applying these requirements to the daily operation of their programs, whether starting a new program or striving to maintain a quality program which meets the intent of the enacting legislation. It is the…

  4. Career Preparation Program Curriculum Guide for: Hospitality/Tourism Industry (Food Services).

    Science.gov (United States)

    British Columbia Dept. of Education, Victoria. Curriculum Development Branch.

    This curriculum outline provides secondary and postsecondary instructors with detailed information on student learning outcomes for completion of the food services program requirements in the hospitality/tourism industry. A program overview discusses the aims of education; secondary school philosophy; and career preparation programs and their…

  5. School's Out . . . Let's Eat. FRAC's Guide to Organizing a Summer Food Program. Second Edition.

    Science.gov (United States)

    Sandifer, Michael S.

    The Summer Food Program (SFP) is a federally funded program designed to feed needy children during school vacations from May through September. Children may be fed breakfasts, lunches, and suppers, plus two snacks, up to seven days a week. All meals must be served free to all children. The program provides an opportunity to simultaneously improve…

  6. Guide to the Canadian nuclear fuel waste management program. 2.ed

    International Nuclear Information System (INIS)

    Rosinger, E.L.J.; Lyon, R.B.; Gillespie, P.; Tamm, J.

    1983-02-01

    This document describes the administrative structure and major research and development components of the Canadian Nuclear Fuel Waste Management Program. It outlines the participating organizations, summarizes the program statistics, and describes the international cooperation and external review aspects of the program

  7. Processing system of jaws tomograms for pathology identification and surgical guide modeling

    International Nuclear Information System (INIS)

    Putrik, M. B.; Ivanov, V. Yu.; Lavrentyeva, Yu. E.

    2015-01-01

    The aim of the study is to create an image processing system, which allows dentists to find pathological resorption and to build surgical guide surface automatically. X-rays images of jaws from cone beam tomography or spiral computed tomography are the initial data for processing. One patient’s examination always includes up to 600 images (or tomograms), that’s why the development of processing system for fast automation search of pathologies is necessary. X-rays images can be useful not for only illness diagnostic but for treatment planning too. We have studied the case of dental implantation – for successful surgical manipulations surgical guides are used. We have created a processing system that automatically builds jaw and teeth boundaries on the x-ray image. After this step, obtained teeth boundaries used for surgical guide surface modeling and jaw boundaries limit the area for further pathologies search. Criterion for the presence of pathological resorption zones inside the limited area is based on statistical investigation. After described actions, it is possible to manufacture surgical guide using 3D printer and apply it in surgical operation

  8. The Use of Molecular Modeling Programs in Medicinal Chemistry Instruction.

    Science.gov (United States)

    Harrold, Marc W.

    1992-01-01

    This paper describes and evaluates the use of a molecular modeling computer program (Alchemy II) in a pharmaceutical education program. Provided are the hardware requirements and basic program features as well as several examples of how this program and its features have been applied in the classroom. (GLR)

  9. Systems-based guiding principles for risk modeling, planning, assessment, management, and communication.

    Science.gov (United States)

    Haimes, Yacov Y

    2012-09-01

    This article is grounded on the premise that the complex process of risk assessment, management, and communication, when applied to systems of systems, should be guided by universal systems-based principles. It is written from the perspective of systems engineering with the hope and expectation that the principles introduced here will be supplemented and complemented by principles from the perspectives of other disciplines. Indeed, there is no claim that the following 10 guiding principles constitute a complete set; rather, the intent is to initiate a discussion on this important subject that will incrementally lead us to a more complete set of guiding principles. The 10 principles are as follows: First Principle: Holism is the common denominator that bridges risk analysis and systems engineering. Second Principle: The process of risk modeling, assessment, management, and communication must be systemic and integrated. Third Principle: Models and state variables are central to quantitative risk analysis. Fourth Principle: Multiple models are required to represent the essence of the multiple perspectives of complex systems of systems. Fifth Principle: Meta-modeling and subsystems integration must be derived from the intrinsic states of the system of systems. Sixth Principle: Multiple conflicting and competing objectives are inherent in risk management. Seventh Principle: Risk analysis must account for epistemic and aleatory uncertainties. Eighth Principle: Risk analysis must account for risks of low probability with extreme consequences. Ninth Principle: The time frame is central to quantitative risk analysis. Tenth Principle: Risk analysis must be holistic, adaptive, incremental, and sustainable, and it must be supported with appropriate data collection, metrics with which to measure efficacious progress, and criteria on the basis of which to act. The relevance and efficacy of each guiding principle is demonstrated by applying it to the U.S. Federal Aviation

  10. User's Guide for the Agricultural Non-Point Source (AGNPS) Pollution Model Data Generator

    Science.gov (United States)

    Finn, Michael P.; Scheidt, Douglas J.; Jaromack, Gregory M.

    2003-01-01

    BACKGROUND Throughout this user guide, we refer to datasets that we used in conjunction with developing of this software for supporting cartographic research and producing the datasets to conduct research. However, this software can be used with these datasets or with more 'generic' versions of data of the appropriate type. For example, throughout the guide, we refer to national land cover data (NLCD) and digital elevation model (DEM) data from the U.S. Geological Survey (USGS) at a 30-m resolution, but any digital terrain model or land cover data at any appropriate resolution will produce results. Another key point to keep in mind is to use a consistent data resolution for all the datasets per model run. The U.S. Department of Agriculture (USDA) developed the Agricultural Nonpoint Source (AGNPS) pollution model of watershed hydrology in response to the complex problem of managing nonpoint sources of pollution. AGNPS simulates the behavior of runoff, sediment, and nutrient transport from watersheds that have agriculture as their prime use. The model operates on a cell basis and is a distributed parameter, event-based model. The model requires 22 input parameters. Output parameters are grouped primarily by hydrology, sediment, and chemical output (Young and others, 1995.) Elevation, land cover, and soil are the base data from which to extract the 22 input parameters required by the AGNPS. For automatic parameter extraction, follow the general process described in this guide of extraction from the geospatial data through the AGNPS Data Generator to generate input parameters required by the pollution model (Finn and others, 2002.)

  11. Using the theoretical domains framework to guide the development of a self-management program for individuals with spinal cord injury: Results from a national stakeholder advisory group.

    Science.gov (United States)

    Munce, Sarah E P; Allin, Sonya; Wolfe, Dalton L; Anzai, Karen; Linassi, Gary; Noonan, Vanessa K; Jaglal, Susan B

    2017-11-01

    To determine the implementation considerations for a targeted self-management program for individuals with spinal cord injury (SCI) from the perspective of a national stakeholder advisory group using the Theoretical Domains Framework (TDF) as a guide. Qualitative descriptive approach. Two focus groups held at the 6 th National Spinal Cord Injury Conference (October 2-4 th , 2014) in Toronto, Ontario, Canada. A total of 25 stakeholders from across Canada participated in focus groups or "brainstorming sessions". The stakeholders included 5 clinicians, 14 researchers, 3 policy makers, and 3 individuals with SCI. Not applicable. Not applicable. All 14 theoretical domains were identified in the brainstorming sessions. No new themes or domains were identified. The need to consider the theoretical domains of Knowledge, Skills, Reinforcement, Intentions, Goals (e.g. the readiness of the individual with SCI), Environmental Context and Resources (e.g. considerations for governance and ownership of the program and a business model for sustainability), as well as Social Influences (e.g. issues of privacy and security in the context of on-line delivery) was identified. The current study provides complementary results to our previous series of studies on the implementation considerations for the development of a targeted self-management program for individuals with SCI by emphasizing the health care professional/health policy perspective. It is anticipated that such a program could not only reduce secondary complications and subsequent inappropriate health care use but it may also improve the quality of life for individuals with SCI and their caregivers.

  12. The role of personal practice in therapist skill development: a model to guide therapists, educators, supervisors and researchers.

    Science.gov (United States)

    Bennett-Levy, James; Finlay-Jones, Amy

    2018-05-01

    Prior to 2000, personal practice (PP) for therapists mostly meant personal therapy. Recently a new landscape of PPs has emerged, with meditation-based programs and therapy self-practice/self-reflection (SP/SR) programs playing an increasing role in training and personal/professional development. The challenge now for practitioners and researchers is to refocus on the role of PPs in training and professional development. Are PPs of value - or not? Do they have a role in therapist development? How might PPs enhance therapist skilfulness? Do different PPs act in similar or different ways? Currently, the PP literature lacks a theoretical framework to guide practitioners in their choice of PPs or researchers in their choice of research questions and measures. The purpose of this article is to provide such a framework, the Personal Practice (PP) model. The PP model proposes primary impacts of PPs in four domains: personal development/wellbeing, self-awareness, interpersonal beliefs/attitudes/skills and reflective skills. The model also suggests a secondary impact on therapists' conceptual/technical skills when therapists use reflection to consider the implications of their PP for their "therapist self". We offer some suggestions to enhance the quality of future research, and conclude that PPs may play an important and perhaps unique role in therapist training.

  13. Affordance-based perception-action dynamics: A model of visually guided braking.

    Science.gov (United States)

    Harrison, Henry S; Turvey, Michael T; Frank, Till D

    2016-04-01

    Behavioral dynamics is a framework for understanding adaptive behavior as arising from the self-organizing interaction between animal and environment. The methods of nonlinear dynamics provide a language for describing behavior that is both stable and flexible. Behavioral dynamics has been criticized for ignoring the animal's sensitivity to its own capabilities, leading to the development of an alternative framework: affordance-based control. Although it is theoretically sound and empirically motivated, affordance-based control has resisted characterization in terms of nonlinear dynamics. Here, we provide a dynamical description of affordance-based control, extending behavioral dynamics to meet its criticisms. We propose a general modeling strategy consistent with both theories. We use visually guided braking as a representative behavior and construct a novel dynamical model. This model demonstrates the possibility of understanding visually guided action as respecting the limits of the actor's capabilities, while still being guided by informational variables associated with desired states of affairs. In addition to such "hard" constraints on behavior, our framework allows for the influence of "soft" constraints such as preference and comfort, opening a new area of inquiry in perception-action dynamics. (c) 2016 APA, all rights reserved).

  14. Light Water Reactor Sustainability Program: Digital Technology Business Case Methodology Guide

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lawrie, Sean [ScottMadden, Inc., Raleigh, NC (United States); Hart, Adam [ScottMadden, Inc., Raleigh, NC (United States); Vlahoplus, Chris [ScottMadden, Inc., Raleigh, NC (United States)

    2014-09-01

    The Department of Energy’s (DOE’s) Light Water Reactor Sustainability Program aims to develop and deploy technologies that will make the existing U.S. nuclear fleet more efficient and competitive. The program has developed a standard methodology for determining the impact of new technologies in order to assist nuclear power plant (NPP) operators in building sound business cases. The Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway is part of the DOE’s Light Water Reactor Sustainability (LWRS) Program. It conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. This work involves two major goals: (1) to ensure that legacy analog II&C systems are not life-limiting issues for the LWR fleet and (2) to implement digital II&C technology in a manner that enables broad innovation and business improvement in the NPP operating model. Resolving long-term operational concerns with the II&C systems contributes to the long-term sustainability of the LWR fleet, which is vital to the nation’s energy and environmental security. The II&C Pathway is conducting a series of pilot projects that enable the development and deployment of new II&C technologies in existing nuclear plants. Through the LWRS program, individual utilities and plants are able to participate in these projects or otherwise leverage the results of projects conducted at demonstration plants. Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on

  15. GRPAUT: a program for Pu isotopic analysis (a user's guide). ISPO task A. 76

    Energy Technology Data Exchange (ETDEWEB)

    Fleissner, J G

    1981-01-30

    GRPAUT is a modular program for performing automated Pu isotopic analysis supplied to the International Atomic Energy Agency (IAEA) per ISPO Task A.76. Section I of this user's guide for GRPAUT presents an overview of the various programs and disk files that are used in performing a Pu isotopic analysis. Section II describes the program GRFEDT which is used in creating and editing the analysis parameter file that contains all the spectroscopic information needed at runtime by GRPAUT. An example of the dialog and output of GRFEDT is shown in Appendix B. Section III describes the operation of the various GRPAUT modules: GRPNL2, the peak stripping module; EFFCH2, the efficiency calculation module; and ISOAUT, the isotopic calculation module. (A description of the peak fitting methodology employed by GRPNL2 is presented in Appendix A.) Finally, Section IV outlines the procedure for determining the peak shape constants for a detector system and describes the operation of the program used to create and edit the peak shape parameter files. An output of GRPAUT, showing an example of a complete isotopic analysis, is presented in Appendix C. Source listings of all the Fortran programs supplied to the Agency under ISPO Task A.76 are contained in Appendix E.

  16. Building Subsurface Velocity Models with Sharp Interfaces Using Interface-Guided Seismic Full-Waveform Inversion

    Science.gov (United States)

    Lin, Youzuo; Huang, Lianjie

    2017-11-01

    Reverse-time migration has the potential to image complex subsurface structures, including steeply-dipping fault zones, but the method requires an accurate velocity model. Acoustic- and elastic-waveform inversion is a promising tool for high-resolution velocity model building. Because of the ill-posedness of acoustic- and elastic-waveform inversion, it is a great challenge to obtain accurate velocity models containing sharp interfaces. To improve velocity model building, we develop an acoustic- and elastic-waveform inversion method with an interface-guided modified total-variation regularization scheme to improve the inversion accuracy and robustness, particularly for models with sharp interfaces and steeply-dipping fault zones with widths much smaller than the seismic wavelength. The new regularization scheme incorporates interface information into seismic full-waveform inversion. The interface information of subsurface interfaces is obtained iteratively using migration imaging during waveform inversion. Seismic migration is robust for subsurface imaging. Our new acoustic- and elastic-waveform inversion takes advantage of the robustness of migration imaging to improve velocity estimation. We use synthetic seismic data for a complex model containing sharp interfaces and several steeply-dipping fault zones to validate the improved capability of our new acoustic- and elastic-waveform inversion method. Our inversion results are much better than those produced without using interface-guided regularization. Acoustic- and elastic-waveform inversion with an interface-guided modified total-variation regularization scheme has the potential to accurately build subsurface velocity models with sharp interfaces and/or steep fault zones.

  17. The Eatwell Guide: Modelling the Health Implications of Incorporating New Sugar and Fibre Guidelines.

    Directory of Open Access Journals (Sweden)

    Linda J Cobiac

    Full Text Available To model population health impacts of dietary changes associated with the redevelopment of the UK food-based dietary guidelines (the 'Eatwell Guide'.Using multi-state lifetable methods, we modelled the impact of dietary changes on cardiovascular disease, diabetes and cancers over the lifetime of the current UK population. From this model, we determined change in life expectancy and disability-adjusted life years (DALYs that could be averted.Changing the average diet to that recommended in the new Eatwell Guide, without increasing total energy intake, could increase average life expectancy by 5.4 months (95% uncertainty interval: 4.7 to 6.2 for men and 4.0 months (3.4 to 4.6 for women; and avert 17.9 million (17.6 to 18.2 DALYs over the lifetime of the current population. A large proportion of the health benefits are from prevention of type 2 diabetes, with 440,000 (400,000 to 480,000 new cases prevented in men and 340,000 (310,000 to 370,000 new cases prevented in women, over the next ten years. Prevention of cardiovascular diseases and colorectal cancer is also large. However, if the diet recommended in the new Eatwell Guide is achieved with an accompanying increase in energy intake (and thus an increase in body mass index, around half the potential improvements in population health will not be realised.The dietary changes required to meet recommendations in the Eatwell Guide, which include eating more fruits and vegetables and less red and processed meats and dairy products, are large. However, the potential population health benefits are substantial.

  18. Program Guide for Diesel Engine Mechanics 8742000 (IN47.060500) and Heavy Duty Truck and Bus Mechanics DIM0991 (IN47.060501).

    Science.gov (United States)

    University of South Florida, Tampa. Coll. of Education.

    This competency-based program guide provides course content information and procedures for secondary schools, postsecondary vocational schools, and community colleges in Florida that conduct programs in diesel engine mechanics and heavy duty truck and bus mechanics. The first section is on legal authority, which applies to all vocational education…

  19. Raza de Tesoros. Programa de Lectura y Ensenanza del Lenguaje, Unidad B. Guia para el Maestro (Race of Treasures. Reading and Language Learning Program, Unit B. Teacher's Guide).

    Science.gov (United States)

    Dissemination and Assessment Center for Bilingual Education, Austin, TX.

    This is the teacher's guide accompanying a reader and a workbook that are part of an ungraded language arts and reading program that can be used in classes from upper elementary through high school. The program is designed around reading selections which present aspects of history, culture, and present-day experiences of special relevance to the…

  20. Escaparate. Programa de lectura y ensenanza del lenguaje, Unidad C. Guia Para El Maestro (Show Window. Reading and Language Learning Program, Unit C. Teacher's Guide).

    Science.gov (United States)

    Dissemination and Assessment Center for Bilingual Education, Austin, TX.

    Instructions for use of "Escaparate," the third of eight Spanish reading and language instruction units developed by Edgewood School District's Bilingual Program, San Antonio, Texas, are given in this teacher guide. Originally intended for grades four through six, the program may be used from fourth grade to secondary school in Spanish reading and…

  1. Hanford site guide for preparing and maintaining generator group pollution prevention program documentation

    International Nuclear Information System (INIS)

    1995-12-01

    This manual provides the necessary guidance to contractor generator groups for developing and maintaining documentation of their pollution prevention (P2) program activities. Preparation of program documentation will demonstrate compliance with contractor and U.S. Department of Energy (DOE) requirements, as well as state and federal regulations. Contractor waste generator groups are no longer required to prepare and update facility waste minimization plans. Developing and maintaining program documentation replace this requirement

  2. User’s Guide: Computer Program for Three-Dimensional Analysis of Building Systems (CTABS80).

    Science.gov (United States)

    1981-08-01

    computer program TABS (1,2,3) was the direct " feedback " from the profession in the use of these programs. The first of these programs, FRMSTC, is a static...II. ~ gil a gilt eig gggg go gte *,0 glee 10 eeC ’MO * eel a 10 III. * il - C a iii - - egg’ a *. - let 4 0 a gill tel 4 C - - tie 10 lii

  3. User guide of the QCB26 program; Guia para el usuario del programa QCB26

    Energy Technology Data Exchange (ETDEWEB)

    Perusquia C, R. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Sanchez H, L. [CFE, Veracruz (Mexico)

    1992-06-15

    This procedure will be used for the Fuel Management group of the Laguna Verde Nuclear Power station as the basic instructive that allows to use the QCB26.EXE program. This program allows to administer the information of the patterns of bars and thermal hydraulics parameters of the Pl reports of the computer process, to generate impressions of the captured base, to form data enter for the PRESTO program and to print PT type reports. (Author)

  4. Navy Planning, Programming, Budgeting, and Execution: A Reference Guide for Senior Leaders, Managers, and Action Officers

    Science.gov (United States)

    2016-01-01

    Secretariat , including the Sec- retary of the Navy (who owns the department POM) and his or her deputy; the Assis- tant Secretary for Research, Development, and...Planning, Programming, Budgeting, and Execution processes, particularly the Navy’s process. We have taken their com- ments to heart , and the document is...requirements, programming, and acquisition. Acquisition has been the responsibility of the Navy Secretariat ,2 through the SYSCOMs, PEOs, program offices

  5. A Component-based Programming Model for Composite, Distributed Applications

    Science.gov (United States)

    Eidson, Thomas M.; Bushnell, Dennis M. (Technical Monitor)

    2001-01-01

    The nature of scientific programming is evolving to larger, composite applications that are composed of smaller element applications. These composite applications are more frequently being targeted for distributed, heterogeneous networks of computers. They are most likely programmed by a group of developers. Software component technology and computational frameworks are being proposed and developed to meet the programming requirements of these new applications. Historically, programming systems have had a hard time being accepted by the scientific programming community. In this paper, a programming model is outlined that attempts to organize the software component concepts and fundamental programming entities into programming abstractions that will be better understood by the application developers. The programming model is designed to support computational frameworks that manage many of the tedious programming details, but also that allow sufficient programmer control to design an accurate, high-performance application.

  6. BLAKE - A Thermodynamics Code Based on TIGER: Users' Guide to the Revised Program

    National Research Council Canada - National Science Library

    Freedman, Eli

    1998-01-01

    .... This code, which was derived from the original version of SRI's TIGER program, is intended primarily for making calculations on the combustion products from conventional military and electrically...

  7. Practitioner's guide to laser pulse propagation models and simulation

    Energy Technology Data Exchange (ETDEWEB)

    Couairon, A. [Centre de Physique Theorique, CNRS, Ecole Polytechnique, 91128 Palaiseau (France); Brambilla, E.; Corti, T. [Department of Physics and Mathematics, University of Insubria, via Vallegio 11, 22100 Como (Italy); Majus, D. [Department of Quantum Electronics, Vilnius University, Sauletekio Avenue 9, Bldg. 3, 10222 Vilnius (Lithuania); Ramirez-Congora, O. de [Departamento de Ciencias Naturales y Matematicas, Pontificia Universidad Javeriana-Cali, Avenida Canas Gordas no 118-250 Cali (Colombia); Kolesik, M. [College of Optical Sciences, Tucson 85721 AZ (United States); Department of Physics, Constantine the Philosopher Uninversity, Nitra (Slovakia)

    2011-11-15

    The purpose of this article is to provide practical introduction into numerical modeling of ultrashort optical pulses in extreme nonlinear regimes. The theoretic background section covers derivation of modern pulse propagation models starting from Maxwell's equations, and includes both envelope-based models and carrier-resolving propagation equations. We then continue with a detailed description of implementation in software of Nonlinear Envelope Equations as an example of a mixed approach which combines finite-difference and spectral techniques. Fully spectral numerical solution methods for the Unidirectional Pulse Propagation Equation are discussed next. The modeling part of this guide concludes with a brief introduction into efficient implementations of nonlinear medium responses. Finally, we include several worked-out simulation examples. These are mini-projects designed to highlight numerical and modeling issues, and to teach numerical-experiment practices. They are also meant to illustrate, first and foremost for a non-specialist, how tools discussed in this guide can be applied in practical numerical modeling. (authors)

  8. A cluster randomized theory-guided oral hygiene trial in adolescents-A latent growth model.

    Science.gov (United States)

    Aleksejūnienė, J; Brukienė, V

    2018-05-01

    (i) To test whether theory-guided interventions are more effective than conventional dental instruction (CDI) for changing oral hygiene in adolescents and (ii) to examine whether such interventions equally benefit both genders and different socio-economic (SES) groups. A total of 244 adolescents were recruited from three schools, and cluster randomization allocated adolescents to one of the three types of interventions: two were theory-based interventions (Precaution Adoption Process Model or Authoritative Parenting Model) and CDI served as an active control. Oral hygiene levels % (OH) were assessed at baseline, after 3 months and after 12 months. A complete data set was available for 166 adolescents (the total follow-up rate: 69%). There were no significant differences in baseline OH between those who participated throughout the study and those who dropped out. Bivariate and multivariate analyses showed that theory-guided interventions produced significant improvements in oral hygiene and that there were no significant gender or socio-economic differences. Theory-guided interventions produced more positive changes in OH than CDI, and these changes did not differ between gender and SES groups. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. The IGNITE (investigation to guide new insight into translational effectiveness trial: Protocol for a translational study of an evidenced-based wellness program in fire departments

    Directory of Open Access Journals (Sweden)

    MacKinnon David P

    2010-10-01

    Full Text Available Abstract Background Worksites are important locations for interventions to promote health. However, occupational programs with documented efficacy often are not used, and those being implemented have not been studied. The research in this report was funded through the American Reinvestment and Recovery Act Challenge Topic 'Pathways for Translational Research,' to define and prioritize determinants that enable and hinder translation of evidenced-based health interventions in well-defined settings. Methods The IGNITE (investigation to guide new insights for translational effectiveness trial is a prospective cohort study of a worksite wellness and injury reduction program from adoption to final outcomes among 12 fire departments. It will employ a mixed methods strategy to define a translational model. We will assess decision to adopt, installation, use, and outcomes (reach, individual outcomes, and economic effects using onsite measurements, surveys, focus groups, and key informant interviews. Quantitative data will be used to define the model and conduct mediation analysis of each translational phase. Qualitative data will expand on, challenge, and confirm survey findings and allow a more thorough understanding and convergent validity by overcoming biases in qualitative and quantitative methods used alone. Discussion Findings will inform worksite wellness in fire departments. The resultant prioritized influences and model of effective translation can be validated and manipulated in these and other settings to more efficiently move science to service.

  10. Selection of terrestrial transfer factors for radioecological assessment models and regulatory guides

    International Nuclear Information System (INIS)

    Ng, Y.C.; Hoffman, F.O.

    1983-01-01

    A parameter value for a radioecological assessment model is not a single value but a distribution of values about a central value. The sources that contribute to the variability of transfer factors to predict foodchain transport of radionuclides are enumerated. Knowledge of these sources, judgement in interpreting the available data, consideration of collateral information, and established criteria that specify the desired level of conservatism in the resulting predictions are essential elements when selecting appropriate parameter values for radioecological assessment models and regulatory guides. 39 references, 4 figures, 5 tables

  11. Selection of terrestrial transfer factors for radioecological assessment models and regulatory guides

    Energy Technology Data Exchange (ETDEWEB)

    Ng, Y.C.; Hoffman, F.O.

    1983-01-01

    A parameter value for a radioecological assessment model is not a single value but a distribution of values about a central value. The sources that contribute to the variability of transfer factors to predict foodchain transport of radionuclides are enumerated. Knowledge of these sources, judgement in interpreting the available data, consideration of collateral information, and established criteria that specify the desired level of conservatism in the resulting predictions are essential elements when selecting appropriate parameter values for radioecological assessment models and regulatory guides. 39 references, 4 figures, 5 tables.

  12. Legal Guide for Senior Citizens: Laws and Programs Affecting Kansas Senior Citizens.

    Science.gov (United States)

    Hollinger, Judith A., Ed.

    This booklet is intended to inform (not advise) older Kansans about eligibility requirements and benefits provided by state and federal programs. Financial assistance programs discussed are Social Security, railroad retirements, veterans' benefits, unrestricted general assistance, Employee Retirement Income Security Act, food stamps, Low Income…

  13. Guide to reducing energy use. budget costs. Volume II. Local energy management program

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, S O; Wood, E S; Guenther, S; Graves, T

    1979-10-01

    Information is presented to aid communities tailor an energy conservation program specifically to themselves. Existing and new buildings, procurement, employee transportation programs, street lighting systems, and energy resource recovery are discussed. Examples are given on what can and has been done in communities. (MCW)

  14. A five-year research program in one book : Reading guide

    NARCIS (Netherlands)

    Kothuis, B.L.M.; Kothuis, Baukje; Kok, Matthijs

    2017-01-01

    Dr. Baukje Kothuis was a Postdoc in the STW-MFFD program at the Faculty of Technology, Policy & Management, TU Delft in the project ‘Integrated design’. Currently she works at the Faculty of Civil Engineering & Geosciences as a researcher in the NWO Program ‘Integral & sustainable design

  15. Left-Turning Vehicle Trajectory Modeling and Guide Line Setting at the Intersection

    Directory of Open Access Journals (Sweden)

    Fulu Wei

    2014-01-01

    Full Text Available When left-turning vehicles are released from the multiple left-turning lanes at the signalized intersection, there will be conflicts among them, and the conflicts will affect the traffic operation and safety. In order to solve the problem, by extracting running trajectories of left-turning vehicles and analyzing distribution characteristics of trajectories, velocity changing characteristics, and flow changing characteristics, the left-turning vehicle’s trajectory model was established. On the basis of the above research, taking an example of quadruple left-turning lanes, the idea of setting left-turning guide line at the intersection was proposed. Through instance verification, we could get the conclusion that the method of using left-turning guide line to control vehicles’ turning process can effectively reduce traffic conflicts and delay and improve traffic efficiency.

  16. Resource Review: Youth and Adult Leaders for Program Excellence: A Practical Guide for Program Assessment and Action Planning

    Directory of Open Access Journals (Sweden)

    Hartley Hobson

    2007-03-01

    Full Text Available The Youth and Adult Leaders for Program Excellence (YALPE Resource Kit was developed to assist groups working to promote positive youth development. The Kit includes a variety of assessment tools and templates for data analysis and report writing. The tools are grounded in research on youth development and are user-friendly for adults and youth.

  17. Using Research Literature To Guide Programming Decisions: The Case of the Eldora Building Academic and Social Skills Program.

    Science.gov (United States)

    Miller, Diane Teel; Bales, Diane W.

    2001-01-01

    A collaborative initiative to help elementary children succeed by providing them with a high-quality, enriching after-school experience was based on principles of developmentally appropriate environment, child centeredness, computer technology, and parent involvement. Preliminary evidence indicates that the program had positive effects on reading…

  18. Use of the FAR Guide in Alternative Teaching Models Developed on Structuring the Topic of Energy

    Directory of Open Access Journals (Sweden)

    Hilal Aktamış

    2012-06-01

    Full Text Available The objective of this study is to determine the impact of the use of alternative teaching models, under the leadership of the FAR Guide, on the ability of students to comprehend the topic of energy. After the experiment done related to each subject, modelling was performed to provide the students to configure such an abstract concept as ‘energy’ in their minds. The participants of the research was consisted of ninth grade students (n=52 existing in Aydin Province, Turkey. In the research, the pre-test post-test experimental model with a control group was used. The data collection tools were interview questions about energy, multiple choice energy achievement scale and the role of scientific models scale. At the end of the research, it was found that there is an increase in the physics achievement level and scientific models attitudes of students

  19. Online Obsessive-Compulsive Disorder Treatment: Preliminary Results of the "OCD? Not Me!" Self-Guided Internet-Based Cognitive Behavioral Therapy Program for Young People.

    Science.gov (United States)

    Rees, Clare Samantha; Anderson, Rebecca Anne; Kane, Robert Thomas; Finlay-Jones, Amy Louise

    2016-07-05

    The development and evaluation of Internet-delivered cognitive behavioral therapy (iCBT) interventions provides a potential solution for current limitations in the acceptability, availability, and accessibility of mental health care for young people with obsessive-compulsive disorder (OCD). Preliminary results support the effectiveness of therapist-assisted iCBT for young people with OCD; however, no previous studies have examined the effectiveness of completely self-guided iCBT for OCD in young people. We aimed to conduct a preliminary evaluation of the effectiveness of the OCD? Not Me! program for reducing OCD-related psychopathology in young people (12-18 years). This program is an eight-stage, completely self-guided iCBT treatment for OCD, which is based on exposure and response prevention. These data were early and preliminary results of a longer study in which an open trial design is being used to evaluate the effectiveness of the OCD? Not Me! Participants were required to have at least subclinical levels of OCD to be offered the online program. Participants with moderate-high suicide/self-harm risk or symptoms of eating disorder or psychosis were not offered the program. OCD symptoms and severity were measured at pre- and posttest, and at the beginning of each stage of the program. Data was analyzed using generalized linear mixed models. A total of 334 people were screened for inclusion in the study, with 132 participants aged 12 to 18 years providing data for the final analysis. Participants showed significant reductions in OCD symptoms (P<.001) and severity (P<.001) between pre- and posttest. These preliminary results suggest that fully automated iCBT holds promise as a way of increasing access to treatment for young people with OCD; however, further research needs to be conducted to replicate the results and to determine the feasibility of the program. Australian New Zealand Clinical Trials Registry (ANZCTR): ACTRN12613000152729; https://www

  20. Automation of program model developing for complex structure control objects

    International Nuclear Information System (INIS)

    Ivanov, A.P.; Sizova, T.B.; Mikhejkina, N.D.; Sankovskij, G.A.; Tyufyagin, A.N.

    1991-01-01

    A brief description of software for automated developing the models of integrating modular programming system, program module generator and program module library providing thermal-hydraulic calcualtion of process dynamics in power unit equipment components and on-line control system operation simulation is given. Technical recommendations for model development are based on experience in creation of concrete models of NPP power units. 8 refs., 1 tab., 4 figs

  1. Programming models for energy-aware systems

    Science.gov (United States)

    Zhu, Haitao

    Energy efficiency is an important goal of modern computing, with direct impact on system operational cost, reliability, usability and environmental sustainability. This dissertation describes the design and implementation of two innovative programming languages for constructing energy-aware systems. First, it introduces ET, a strongly typed programming language to promote and facilitate energy-aware programming, with a novel type system design called Energy Types. Energy Types is built upon a key insight into today's energy-efficient systems and applications: despite the popular perception that energy and power can only be described in joules and watts, real-world energy management is often based on discrete phases and modes, which in turn can be reasoned about by type systems very effectively. A phase characterizes a distinct pattern of program workload, and a mode represents an energy state the program is expected to execute in. Energy Types is designed to reason about energy phases and energy modes, bringing programmers into the optimization of energy management. Second, the dissertation develops Eco, an energy-aware programming language centering around sustainability. A sustainable program built from Eco is able to adaptively adjusts its own behaviors to stay on a given energy budget, avoiding both deficit that would lead to battery drain or CPU overheating, and surplus that could have been used to improve the quality of the program output. Sustainability is viewed as a form of supply and demand matching, and a sustainable program consistently maintains the equilibrium between supply and demand. ET is implemented as a prototyped compiler for smartphone programming on Android, and Eco is implemented as a minimal extension to Java. Programming practices and benchmarking experiments in these two new languages showed that ET can lead to significant energy savings for Android Apps and Eco can efficiently promote battery awareness and temperature awareness in real

  2. Quality assurance in diagnostic radiology: a guide for state program implementation

    International Nuclear Information System (INIS)

    1981-01-01

    Efforts to reduce unnecessary radiation exposure in the healing arts and minimize health care costs have been stressed by Federal agencies, professional societies and individual States for the past several years. A method to achieve this goal was developed in the early 1970's and tested extensively since then. This method is referred to as 'Quality Assurance,' (Q.A.). Realizing the potential benefits of implementing quality assurance in diagnostic x-ray facilities, the Conference of Radiation Control Program Directors' Executive Board authorized the formation of a task force in 1976 to study various aspects of Q.A. The specific changes given the task force were: To define the areas that use diagnostic x-ray which require quality assurance and to describe the basic factors to be included in quality assurance programs. To examine current diagnostic x-ray quality assurance programs in Federal agencies and serve as a focal point for State input into these programs. To report to the Conference on quality assurance programs and techniques that could be utilized by the State radiation programs. This document is designed to educate State program personnel in the concepts of Q.A. and to encourage them to assist medical diagnostic x-ray facilities in implementing Q.A

  3. Modified social ecological model: a tool to guide the assessment of the risks and risk contexts of HIV epidemics.

    Science.gov (United States)

    Baral, Stefan; Logie, Carmen H; Grosso, Ashley; Wirtz, Andrea L; Beyrer, Chris

    2013-05-17

    Social and structural factors are now well accepted as determinants of HIV vulnerabilities. These factors are representative of social, economic, organizational and political inequities. Associated with an improved understanding of multiple levels of HIV risk has been the recognition of the need to implement multi-level HIV prevention strategies. Prevention sciences research and programming aiming to decrease HIV incidence requires epidemiologic studies to collect data on multiple levels of risk to inform combination HIV prevention packages. Proximal individual-level risks, such as sharing injection devices and unprotected penile-vaginal or penile-anal sex, are necessary in mediating HIV acquisition and transmission. However, higher order social and structural-level risks can facilitate or reduce HIV transmission on population levels. Data characterizing these risks is often far more actionable than characterizing individual-level risks. We propose a modified social ecological model (MSEM) to help visualize multi-level domains of HIV infection risks and guide the development of epidemiologic HIV studies. Such a model may inform research in epidemiology and prevention sciences, particularly for key populations including men who have sex with men (MSM), people who inject drugs (PID), and sex workers. The MSEM builds on existing frameworks by examining multi-level risk contexts for HIV infection and situating individual HIV infection risks within wider network, community, and public policy contexts as well as epidemic stage. The utility of the MSEM is demonstrated with case studies of HIV risk among PID and MSM. The MSEM is a flexible model for guiding epidemiologic studies among key populations at risk for HIV in diverse sociocultural contexts. Successful HIV prevention strategies for key populations require effective integration of evidence-based biomedical, behavioral, and structural interventions. While the focus of epidemiologic studies has traditionally been on

  4. A user's guide to the disease management literature: recommendations for reporting and assessing program outcomes.

    Science.gov (United States)

    Linden, Ariel; Roberts, Nancy

    2005-02-01

    Recently there has been tremendous growth in the number of lay-press articles and peer-reviewed journal articles reporting extraordinary improvements in health status and financial outcomes due to disease management (DM) interventions. However, closer scrutiny of these reports reveals serious flaws in research design and/or analysis, leaving many to question the veracity of the claims. In recent years, there have been numerous contributions to the literature on how to assess the quality of medical research papers. However, these guidelines focus primarily on randomized controlled trials, with little attention given to the observational study designs typically used in DM outcome studies. As such, general guides to evaluating the medical literature are inadequate in their utility to assist authors and readers of DM outcomes research. The purpose of this paper is to provide authors with a clear and comprehensive guide to the reporting of DM outcomes, as well as to educate readers of the DM literature (both lay and peer reviewed) in how to assess the quality of the findings presented.

  5. SYNCH: A program for design and analysis of synchrotrons and beamlines -- user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Garren, A.A.; Kenney, A.S.; Courant, E.D.; Russell, A.D.; Syphers, M.J.

    1993-12-31

    SYNCH is a computer program for use in the design and analysis of synchrotrons, storage rings, and beamlines. It has a large repertoire of commands that can be accessed in a flexible way. The input statements and the results of the calculations they invoke are saved in an internal database so that this information may be shared by other statements. SYNCH is the first accelerator program to organize its input in the form of a language. The statements, which resemble sentences, provide a natural way of describing lattices and invoking relevant calculations. The organization of the program is modular, so that it has been possible to expand its capabilities progressively.

  6. Hanford Site Guide for Preparing and Maintaining Fenerator Group Pollution Prevention Program Documentation

    International Nuclear Information System (INIS)

    PLACE, B.G.

    1999-01-01

    This document provides guidance to generator groups for preparing and maintaining documentation of Pollution Prevention/Waste Minimization (P2/WMin) Program activities. The guidance is one of a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan (DOE-RL, 1998a) and Prime Contractor implementation plans describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and (300501) (RCRA and EPA, 1994). Documentation guidance for the following five P2/WMin elements are discussed: Fiscal Year (FY) Goals; Budget and Staffing; Waste Minimization (WMinn ) Assessments (WMAs); Pollution Prevention (P2) Reporting; WMin Certification

  7. Hanford Site guide for preparing and maintaining generator group pollution prevention program documentation

    International Nuclear Information System (INIS)

    Place, B.G.

    1998-01-01

    This document provides guidance to generator groups for preparing and maintaining documentation of Pollution Prevention Waste Minimization (P2/WMin) Program activities. The guidance is one of a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan (DOE-RL, 1998a) and Prime contractor implementation plans describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and 3005(h) (RCRA and EPA, 1994). Documentation guidance for the following five P2/WMin elements are discussed: Fiscal Year (FY) Goals; Budget and Staffing; Waste Minimization (WMin) Assessments (WMAs); Quarterly Pollution Prevention (P2) Reporting WMin Certification

  8. A Guided Online and Mobile Self-Help Program for Individuals With Eating Disorders: An Iterative Engagement and Usability Study.

    Science.gov (United States)

    Nitsch, Martina; Dimopoulos, Christina N; Flaschberger, Edith; Saffran, Kristina; Kruger, Jenna F; Garlock, Lindsay; Wilfley, Denise E; Taylor, Craig B; Jones, Megan

    2016-01-11

    Numerous digital health interventions have been developed for mental health promotion and intervention, including eating disorders. Efficacy of many interventions has been evaluated, yet knowledge about reasons for dropout and poor adherence is scarce. Most digital health intervention studies lack appropriate research design and methods to investigate individual engagement issues. User engagement and program usability are inextricably linked, making usability studies vital in understanding and improving engagement. The aim of this study was to explore engagement and corresponding usability issues of the Healthy Body Image Program-a guided online intervention for individuals with body image concerns or eating disorders. The secondary aim was to demonstrate the value of usability research in order to investigate engagement. We conducted an iterative usability study based on a mixed-methods approach, combining cognitive and semistructured interviews as well as questionnaires, prior to program launch. Two separate rounds of usability studies were completed, testing a total of 9 potential users. Thematic analysis and descriptive statistics were used to analyze the think-aloud tasks, interviews, and questionnaires. Participants were satisfied with the overall usability of the program. The average usability score was 77.5/100 for the first test round and improved to 83.1/100 after applying modifications for the second iteration. The analysis of the qualitative data revealed five central themes: layout, navigation, content, support, and engagement conditions. The first three themes highlight usability aspects of the program, while the latter two highlight engagement issues. An easy-to-use format, clear wording, the nature of guidance, and opportunity for interactivity were important issues related to usability. The coach support, time investment, and severity of users' symptoms, the program's features and effectiveness, trust, anonymity, and affordability were relevant to

  9. Understanding Unix/Linux programming a guide to theory and practice

    CERN Document Server

    Molay, Bruce

    2003-01-01

    This book explains in a clear and coherent manner how Unix works, how to understand existing Unix programs, and how to design and create new Unix programs. The book is organized by subsystem, each presented in visual terms and explained using vivid metaphors. It breaks the information into manageable parts that can be presented, explained, and mastered. By using case studies and an extremely reader-friendly manner to illustrate complex ideas and concepts, the book covers the basics of systems programming, users, files and manuals, how to read a directory, using 1S, writing PWD, studying STTY, writing a video game, studying SH, environment and shell variables, I/O redirection and pipes, servers and sockets, writing a web server, license servers, and concurrent functions. For Unix system administrators and programmers, network programmers, and others who have used other operating systems and need to learn Unix programming to expand their skill sets.

  10. [Michigan Technological University Pre-Service Teacher Enhancement Program]. [Includes a copy of the Student Guide

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, C.S.; Yarroch, W.L.

    1993-04-27

    The Michigan Technological University Teacher Education Program received funding from the US Department of Energy for the purpose of providing capable and suitably inclined, MTU Engineering and Science students a chance to explore high school level science and mathematics teaching as a career option. Ten undergraduate students were selected from nominations and were paired with mentor teachers for the study. This report covers the experience of the first ten nominees and their participation in the program.

  11. Site-specific induction of lymphatic malformations in a rat model for image-guided therapy

    International Nuclear Information System (INIS)

    Short, Robert F.; Shiels, William E.; Sferra, Thomas J.; Nicol, Kathleen K.; Schofield, Minka; Wiet, Gregory J.

    2007-01-01

    Lymphatic malformation is a common benign mass in children and adults and is representative of a derangement in lymphangiogenesis. These lesions have high recurrence rates and significant morbidity associated with surgery. Several sclerotherapy regimens have been developed clinically to treat lymphatic malformations; however, an animal model has not been developed that is adequate to test the efficacy of image-guided therapeutic interventions. To develop an animal model suitable for evaluation of percutaneous treatments of lymphatic malformations. Male Harlan Sprague-Dawley rats (n = 9) received two US-guided injections of Incomplete Freund's Adjuvant (IFA) over a 2-week period. All nine rats were injected twice into the peritoneum (IP); a subgroup (n = 3) received additional injections into the neck. Three animals that received IP injections of saline were used as controls. The injection sites were monitored for the development of lesions by high-resolution ultrasonography at 2-week intervals for 100 days. High-resolution (4.7 Tesla) magnetic resonance imaging was then performed on two animals noted to have developed masses. The rats were sacrificed and histologic examination of the identified lesions was performed, including immunohistochemical staining for vascular (CD31) and lymphatic (Flt-4 and Prox-1) endothelium. All animals injected with IFA developed cystic lesions. The three animals injected at dual sites were noted to have both microcystic and macrocystic malformations in the neck and microcystic plaque-like lesions in the peritoneum. The macrocystic malformations (≥5 mm) in the neck were detected by ultrasonography and grossly later during necropsy. Histopathologic analysis revealed the cystic spaces to be lined by lymphatic endothelium supported by a connective tissue stroma. Control animals did not exhibit detectable lesions with either ultrasonography or necropsy. This model represents a promising tool for translational development of image-guided

  12. COATING ALTERNATIVES GUIDE (CAGE) USER'S GUIDE

    Science.gov (United States)

    The guide provides instructions for using the Coating Alternatives GuidE (CAGE) software program, version 1.0. It assumes that the user is familiar with the fundamentals of operating an IBM-compatible personal computer (PC) under the Microsoft disk operating system (MS-DOS). CAGE...

  13. Model Teacher - School Dental Hygiene Program.

    Science.gov (United States)

    Smith, Lowell W.

    The purpose of this study, which was carried out during the 1972-73 school year at three parochial schools in the Houston area, was to determine the effectiveness of the Toothkeeper Program, a multimedia program of oral hygiene training carefully developed and packaged to establish effective long-term dental hygiene practice. The study population…

  14. Visual Teaching Model for Introducing Programming Languages

    Science.gov (United States)

    Shehane, Ronald; Sherman, Steven

    2014-01-01

    This study examines detailed usage of online training videos that were designed to address specific course problems that were encountered in an online computer programming course. The study presents the specifics of a programming course where training videos were used to provide students with a quick start path to learning a new programming…

  15. A Model Program for International Commerce Education.

    Science.gov (United States)

    Funston, Richard

    To address the economy's growing reliance on international business, San Diego State University has recently introduced a program in international commerce. The program was developed by packaging coursework in three existing areas: business administration, language training, and area studies. Although still in its infancy, the international…

  16. User's guide of parallel program development environment (PPDE). The 2nd edition

    International Nuclear Information System (INIS)

    Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio; Ohta, Hirofumi

    2000-03-01

    The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a parallelizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

  17. User's guide of parallel program development environment (PPDE). The 2nd edition

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, Hirokazu; Takemiya, Hiroshi; Imamura, Toshiyuki; Koide, Hiroshi; Matsuda, Katsuyuki; Higuchi, Kenji; Hirayama, Toshio [Center for Promotion of Computational Science and Engineering, Japan Atomic Energy Research Institute, Tokyo (Japan); Ohta, Hirofumi [Hitachi Ltd., Tokyo (Japan)

    2000-03-01

    The STA basic system has been enhanced to accelerate support for parallel programming on heterogeneous parallel computers, through a series of R and D on the technology of parallel processing. The enhancement has been made through extending the function of the PPDF, Parallel Program Development Environment in the STA basic system. The extended PPDE has the function to make: 1) the automatic creation of a 'makefile' and a shell script file for its execution, 2) the multi-tools execution which makes the tools on heterogeneous computers to execute with one operation a task on a computer, and 3) the mirror composition to reflect editing results of a file on a computer into all related files on other computers. These additional functions will enhance the work efficiency for program development on some computers. More functions have been added to the PPDE to provide help for parallel program development. New functions were also designed to complement a HPF translator and a paralleilizing support tool when working together so that a sequential program is efficiently converted to a parallel program. This report describes the use of extended PPDE. (author)

  18. A guide to PICKER - a data selection program for the geochemical code PHREEQE

    International Nuclear Information System (INIS)

    Tweed, C.J.

    1988-10-01

    Program PICKER is a data-selection program for the geochemical code PHREEQE. It enables the PHREEQE code to be used in conjunction with a fully documented master database, such as the Nirex HATCHES database without the need to amend the program to store unnecessarily large amounts of data. The program PICKER performs data selection prior to each run, or set of runs, using the program PHREEQE. The user supplies a list of the elements to be included in a particular series of calculations, and the program scans the large database and selects all the possible species and minerals which the elements may form. These data are then converted into the format required by the original, verified PHREEQE code. No other selection criteria such as data quality or kinetic constraints are introduced. Thus use of the PICKER code for data selection does not bias the calculation in any way. The method combines the versatility of a large thermodynamic database with the efficiency of the original, well-verified PHREEQE code. (author)

  19. LISA package user guide. Part I: PREP (Statistical PRE Processor) preparation of input sample for Monte Carlo simulations. Program description and user guide

    International Nuclear Information System (INIS)

    Saltelli, A.; Homma, T.

    1992-01-01

    This manual is subdivided into three parts. In the first part, the PREP utility (Statistical Pre Processor) assists in the preparation of a Monte Carlo Analysis of the behaviour of a model encoded into a computer program. The ultimate goal of this type of analysis is to determine the model response to variation in its input parameters, to assess the uncertainties in the model prediction and to correlate these uncertainties with the most influential model parameters. The part of the analysis dealt with by PREP is the preparation of the input stochastic sample for the analysis given the distribution of the input parameters. PREP tries to ease the transformation of the user model from deterministic (one execution corresponding to one set of values for the input parameters) to stochastic (many executions to cover assigned value distributions for the input parameters). PREP is described with reference to two alternative applications: within the LISA package (for the analysis of the risk of a nuclear waste disposal) and with a user supplied model. 8 refs., 1 fig., 15 tabs

  20. Flexible Fitting of Atomic Models into Cryo-EM Density Maps Guided by Helix Correspondences.

    Science.gov (United States)

    Dou, Hang; Burrows, Derek W; Baker, Matthew L; Ju, Tao

    2017-06-20

    Although electron cryo-microscopy (cryo-EM) has recently achieved resolutions of better than 3 Å, at which point molecular modeling can be done directly from the density map, analysis and annotation of a cryo-EM density map still primarily rely on fitting atomic or homology models to the density map. In this article, we present, to our knowledge, a new method for flexible fitting of known or modeled protein structures into cryo-EM density maps. Unlike existing methods that are guided by local density gradients, our method is guided by correspondences between the α-helices in the density map and model, and does not require an initial rigid-body fitting step. Compared with current methods on both simulated and experimental density maps, our method not only achieves greater accuracy for proteins with large deformations but also runs as fast or faster than many of the other flexible fitting routines. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  1. Dynamic energy conservation model REDUCE. Extension with experience curves, energy efficiency indicators and user's guide

    International Nuclear Information System (INIS)

    Uyterlinde, M.A.; Rijkers, F.A.M.

    1999-12-01

    The main objective of the energy conservation model REDUCE (Reduction of Energy Demand by Utilization of Conservation of Energy) is the evaluation of the effectiveness of economical, financial, institutional, and regulatory measures for improving the rational use of energy in end-use sectors. This report presents the results of additional model development activities, partly based on the first experiences in a previous project. Energy efficiency indicators have been added as an extra tool for output analysis in REDUCE. The methodology is described and some examples are given. The model has been extended with a method for modelling the effects of technical development on production costs, by means of an experience curve. Finally, the report provides a 'users guide', by describing in more detail the input data specification as well as all menus and buttons. 19 refs

  2. A roller chain drive model including contact with guide-bars

    DEFF Research Database (Denmark)

    Pedersen, Sine Leergaard; Hansen, John Michael; Ambrósio, J. A. C.

    2004-01-01

    as continuous force. The model of the roller-chain drive now proposed departs from an earlier model where two contact/impact methods are proposed to describe the contact between the rollers of the chain and the teeth of the sprockets. These different formulations are based on unilateral constraints....... In the continuous force method the roller-sprocket contact, is represented by forces applied on each seated roller and in the respective sprocket teeth. These forces are functions of the pseudo penetrations between roller and sprocket, impacting velocities and a restitution coefficient. In the continuous force......A model of a roller chain drive is developed and applied to the simulation and analysis of roller chain drives of large marine diesel engines. The model includes the impact with guide-bars that are the motion delimiter components on the chain strands between the sprockets. The main components...

  3. Penentuan Posisi Hiposenter Gempabumi dengan Menggunakan Metoda Guided Grid Search dan Model Struktur Kecepatan Tiga Dimensi

    Directory of Open Access Journals (Sweden)

    Hendro Nugroho

    2014-04-01

    Full Text Available Salah satu penelitian ilmu kebumian yang perlu dilakukan untuk membantu upaya mitigasi bencana gempabumi adalah menentukan pusat gempa dengan presisi tinggi. Dalam hal ini ketelitian sangat diperlukan oleh karena adanya heterogenitas materi bumi yang dilewati gelombang gempa dari hiposenter ke stasiun pencatat. Oleh karena itu dengan bantuan model geotomografi (model struktur 3D kecepatan rambat gelombang gempa diharapkan akan dapat diperoleh posisi sumber gempa yang lebih baik. Untuk studi ini daerah penelitian yang diambil adalah Jawa dan sekitarnya, yaitu : 7° LS - 11° LS dan 105° BT - 114° BT. Data yang digunakan adalah waktu tiba gelombang P dari seismogram yang direkam pada seismograf broadband di Indonesia. Penentuan hiposenter menggunakan metoda guided grid search dengan model kecepatan 3D untuk busur Sunda. Hasil penentuan hiposenter gempa dengan pendekatan ini memberikan tingkat kesalahan yang lebih kecil dibandingkan dengan jika digunakan model kecepatan 1D.

  4. L2TTMON Monitoring Program for L2 Topological Trigger in H1 Experiment - User's Guide

    International Nuclear Information System (INIS)

    Banas, E.; Ducorps, A.

    1999-01-01

    Monitoring software for the L2 Topological Trigger in H1 experiment consists of two parts working on two different computers. The hardware read-out and data processing is done on a fast FIC 8234 computer working with the OS9 real time operating system. The Macintosh Quadra is used as a Graphic User Interface for accessing the OS9 trigger monitoring software. The communication between both computers is based on the parallel connection between the Macintosh and the VME crate, where the FIC computer is placed. The special designed protocol (client-server) is used to communicate between both nodes. The general scheme of monitoring for the L2 Topological Trigger and detailed description of using of the monitoring software in both nodes are given in this guide. (author)

  5. The 1995 Ratings of Doctoral Programs: A Hedonic Model.

    Science.gov (United States)

    Ehrenberg, Ronald G.; Hurst, Peter J.

    1998-01-01

    Describes how to employ multivariate regression models and National Research Council data (used to rank doctoral programs) to analyze how measures of program size, faculty seniority, and faculty research and doctoral-degree productivity influence subjective ratings of doctoral programs in 35 academic fields. Illustrates how to compute the effects…

  6. Energy efficiency in nonprofit agencies: Creating effective program models

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.A.; Prindle, B.; Scherr, M.I.; White, D.L.

    1990-08-01

    Nonprofit agencies are a critical component of the health and human services system in the US. It has been clearly demonstrated by programs that offer energy efficiency services to nonprofits that, with minimal investment, they can educe their energy consumption by ten to thirty percent. This energy conservation potential motivated the Department of Energy and Oak Ridge National Laboratory to conceive a project to help states develop energy efficiency programs for nonprofits. The purpose of the project was two-fold: (1) to analyze existing programs to determine which design and delivery mechanisms are particularly effective, and (2) to create model programs for states to follow in tailoring their own plans for helping nonprofits with energy efficiency programs. Twelve existing programs were reviewed, and three model programs were devised and put into operation. The model programs provide various forms of financial assistance to nonprofits and serve as a source of information on energy efficiency as well. After examining the results from the model programs (which are still on-going) and from the existing programs, several replicability factors'' were developed for use in the implementation of programs by other states. These factors -- some concrete and practical, others more generalized -- serve as guidelines for states devising program based on their own particular needs and resources.

  7. NASA Handbook for Models and Simulations: An Implementation Guide for NASA-STD-7009

    Science.gov (United States)

    Steele, Martin J.

    2013-01-01

    The purpose of this Handbook is to provide technical information, clarification, examples, processes, and techniques to help institute good modeling and simulation practices in the National Aeronautics and Space Administration (NASA). As a companion guide to NASA-STD- 7009, Standard for Models and Simulations, this Handbook provides a broader scope of information than may be included in a Standard and promotes good practices in the production, use, and consumption of NASA modeling and simulation products. NASA-STD-7009 specifies what a modeling and simulation activity shall or should do (in the requirements) but does not prescribe how the requirements are to be met, which varies with the specific engineering discipline, or who is responsible for complying with the requirements, which depends on the size and type of project. A guidance document, which is not constrained by the requirements of a Standard, is better suited to address these additional aspects and provide necessary clarification. This Handbook stems from the Space Shuttle Columbia Accident Investigation (2003), which called for Agency-wide improvements in the "development, documentation, and operation of models and simulations"' that subsequently elicited additional guidance from the NASA Office of the Chief Engineer to include "a standard method to assess the credibility of the models and simulations."2 General methods applicable across the broad spectrum of model and simulation (M&S) disciplines were sought to help guide the modeling and simulation processes within NASA and to provide for consistent reporting ofM&S activities and analysis results. From this, the standardized process for the M&S activity was developed. The major contents of this Handbook are the implementation details of the general M&S requirements ofNASA-STD-7009, including explanations, examples, and suggestions for improving the credibility assessment of an M&S-based analysis.

  8. Structures, processes and outcomes of the Aussie Heart Guide Program: A nurse mentor supported, home based cardiac rehabilitation program for rural patients with acute coronary syndrome.

    Science.gov (United States)

    Frohmader, Terence J; Lin, Frances; Chaboyer, Wendy P

    2018-03-01

    Cardiac rehabilitation has a number of benefits for patients, yet participation in it is sub-optimal, especially in regional Australia. Innovative models of cardiac rehabilitation are needed to improve participation. Providing nurse mentors to support patients transitioning from hospital to home represents a new model of service delivery in Australia. To explore the impact of a home-based cardiac rehabilitation program in assisting patients to recover from Acute Coronary Syndrome and meeting the expectations of nurse mentors delivering the program. This case study was underpinned by the structure, process and outcomes model and occurred in three Australian hospitals 2008-2011. Thirteen patients recovering from acute coronary syndrome were interviewed by telephone and seven nurse mentors completed a survey after completing the program. Mentor perceptions concerning the structures of the home-based CR program included the timely recruitment of patients, mentor training to operationalise the program, commitment to development of the mentor role, and the acquisition of knowledge and skills about cognitive behavioural therapy and patient centred care. Processes included the therapeutic relationship between mentors and patients, suitability of the program and the promotion of healthier lifestyle behaviours. Outcomes identified that patients were satisfied with the program's audiovisual resources, and the level of support and guidance provided by their nurse mentors. Mentors believed that the program was easy to use in terms of its delivery. Patients believed the program assisted their recovery and were satisfied with the information, guidance and support received from mentors. There were positive signs that the program influenced patients' decisions to change unhealthy lifestyle behaviours. Outcomes highlighted both rewards and barriers associated with mentoring patients in their homes by telephone. Experience gained from developing a therapeutic relationship with

  9. Optimization of an Image-Guided Laser-Induced Choroidal Neovascularization Model in Mice.

    Directory of Open Access Journals (Sweden)

    Yan Gong

    Full Text Available The mouse model of laser-induced choroidal neovascularization (CNV has been used in studies of the exudative form of age-related macular degeneration using both the conventional slit lamp and a new image-guided laser system. A standardized protocol is needed for consistent results using this model, which has been lacking. We optimized details of laser-induced CNV using the image-guided laser photocoagulation system. Four lesions with similar size were consistently applied per eye at approximately double the disc diameter away from the optic nerve, using different laser power levels, and mice of various ages and genders. After 7 days, the mice were sacrificed and retinal pigment epithelium/choroid/sclera was flat-mounted, stained with Isolectin B4, and imaged. Quantification of the area of the laser-induced lesions was performed using an established and constant threshold. Exclusion criteria are described that were necessary for reliable data analysis of the laser-induced CNV lesions. The CNV lesion area was proportional to the laser power levels. Mice at 12-16 weeks of age developed more severe CNV than those at 6-8 weeks of age, and the gender difference was only significant in mice at 12-16 weeks of age, but not in those at 6-8 weeks of age. Dietary intake of omega-3 long-chain polyunsaturated fatty acid reduced laser-induced CNV in mice. Taken together, laser-induced CNV lesions can be easily and consistently applied using the image-guided laser platform. Mice at 6-8 weeks of age are ideal for the laser-induced CNV model.

  10. Approaches to highly parameterized inversion: A guide to using PEST for model-parameter and predictive-uncertainty analysis

    Science.gov (United States)

    Doherty, John E.; Hunt, Randall J.; Tonkin, Matthew J.

    2010-01-01

    these highly parameterized modeling contexts. Availability of these utilities is particularly important because, in many cases, a significant proportion of the uncertainty associated with model parameters-and the predictions that depend on them-arises from differences between the complex properties of the real world and the simplified representation of those properties that is expressed by the calibrated model. This report is intended to guide intermediate to advanced modelers in the use of capabilities available with the PEST suite of programs for evaluating model predictive error and uncertainty. A brief theoretical background is presented on sources of parameter and predictive uncertainty and on the means for evaluating this uncertainty. Applications of PEST tools are then discussed for overdetermined and underdetermined problems, both linear and nonlinear. PEST tools for calculating contributions to model predictive uncertainty, as well as optimization of data acquisition for reducing parameter and predictive uncertainty, are presented. The appendixes list the relevant PEST variables, files, and utilities required for the analyses described in the document.

  11. Modeling, Specification and Construction of PLC-programs

    Directory of Open Access Journals (Sweden)

    E. V. Kuzmin

    2013-01-01

    Full Text Available A new approach to construction of reliable discrete PLC-programs with timers — programming based on specification and verification — is proposed. Timers are modelled in a discrete way. For the specification of a program behavior we use the linear-time temporal logic LTL. Programming is carried out in the ST-language according to a LTLspecification. A new approach to programming of PLC is shown by an example. The proposed programming approach provides an ability of a correctness analysis of PLC-programs using the model checking method. The programming requires fulfillment of the following two conditions: 1 a value of each variable should be changed not more than once per one full PLC-program implementation (per one full working cycle of PLC; 2 a value of each variable should only be changed in one place of a PLC-program. Under the proposed approach the change of the value of each program variable is described by a pair of LTL-formulas. The first LTL-formula describes situations that increase the value of the corresponding variable, the second LTL-formula specifies conditions leading to a decrease of the variable value. The LTL-formulas (used for specification of the corresponding variable behavior are constructive in the sense that they construct the PLC-program, which satisfies temporal properties expressed by these formulas. Thus, the programming of PLC is reduced to the construction of LTL-specification of the behavior of each program variable.

  12. International Energy Agency Implementing Agreements and Annexes: A Guide for Building Technologies Program Managers

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Meredydd; Runci, Paul; Meier, Alan

    2008-08-01

    This report presents results from a program evaluation of the U.S. Department of Energy?s Buildings Technologies Program (BTP) participation in collaborative international technology implementing agreements. The evaluation was conducted by researchers from the Pacific Northwest National Laboratory and the Lawrence Berkeley National Laboratory in the fall of 2007 and winter 2008 and was carried out via interviews with stakeholders in four implementing agreements in which BTP participates, reviews of relevant program reports, websites and other published materials. In addition to these findings, the report includes a variety of supporting materials such that aim to assist BTP managers who currently participate in IEA implementing agreements or who may be considering participation.

  13. Hanford Site Guide for Preparing and Maintaining Generator Group Pollution Prevention Program Documentation

    Energy Technology Data Exchange (ETDEWEB)

    PLACE, B.G.

    2000-11-01

    This document provides guidance to generator groups for preparing and maintaining documentation of Pollution Prevention/Waste Minimization (P2/WMin) Program activities. The guidance is one of a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan (DOE-RL, 2000) and Prime Contractor implementation plans describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and 3005(h) (RCRA and EPA, 1994) and Department of Energy Acquisition Regulations (DEAR) (48 CFR 970.5204-2 and 48 CFR 970.5204-78). Documentation guidance for the following five P2/WMin elements is discussed: Fiscal Year (FY) Goals; Budget and Staffing; Pollution Prevention (P2) Reporting; WMin Certification; and Waste Minimization (WMin) Assessments (WMAs).

  14. High engagement, high quality: A guiding framework for developing empirically informed asynchronous e-learning programs for health professional educators.

    Science.gov (United States)

    Sinclair, Peter M; Levett-Jones, Tracey; Morris, Amanda; Carter, Ben; Bennett, Paul N; Kable, Ashley

    2017-03-01

    E-learning involves the transfer of skills and knowledge via technology so that learners can access meaningful and authentic educational materials. While learner engagement is important, in the context of healthcare education, pedagogy must not be sacrificed for edu-tainment style instructional design. Consequently, health professional educators need to be competent in the use of current web-based educational technologies so that learners are able to access relevant and engaging e-learning materials without restriction. The increasing popularity of asynchronous e-learning programs developed for use outside of formal education institutions has made this need more relevant. In these contexts, educators must balance design and functionality to deliver relevant, cost-effective, sustainable, and accessible programs that overcome scheduling and geographic barriers for learners. This paper presents 10 guiding design principles and their application in the development of an e-learning program for general practice nurses focused on behavior change. Consideration of these principles will assist educators to develop high quality, pedagogically sound, engaging, and interactive e-learning resources. © 2017 John Wiley & Sons Australia, Ltd.

  15. First Order Fire Effects Model: FOFEM 4.0, user's guide

    Science.gov (United States)

    Elizabeth D. Reinhardt; Robert E. Keane; James K. Brown

    1997-01-01

    A First Order Fire Effects Model (FOFEM) was developed to predict the direct consequences of prescribed fire and wildfire. FOFEM computes duff and woody fuel consumption, smoke production, and fire-caused tree mortality for most forest and rangeland types in the United States. The model is available as a computer program for PC or Data General computer.

  16. Drug efficiency: a new concept to guide lead optimization programs towards the selection of better clinical candidates.

    Science.gov (United States)

    Braggio, Simone; Montanari, Dino; Rossi, Tino; Ratti, Emiliangelo

    2010-07-01

    As a result of their wide acceptance and conceptual simplicity, drug-like concepts are having a major influence on the drug discovery process, particularly in the selection of the 'optimal' absorption, distribution, metabolism, excretion and toxicity and physicochemical parameters space. While they have an undisputable value when assessing the potential of lead series or in evaluating inherent risk of a portfolio of drug candidates, they result much less useful in weighing up compounds for the selection of the best potential clinical candidate. We introduce the concept of drug efficiency as a new tool both to guide the drug discovery program teams during the lead optimization phase and to better assess the developability potential of a drug candidate.

  17. Structural Equation Modeling with Mplus Basic Concepts, Applications, and Programming

    CERN Document Server

    Byrne, Barbara M

    2011-01-01

    Modeled after Barbara Byrne's other best-selling structural equation modeling (SEM) books, this practical guide reviews the basic concepts and applications of SEM using Mplus Versions 5 & 6. The author reviews SEM applications based on actual data taken from her own research. Using non-mathematical language, it is written for the novice SEM user. With each application chapter, the author "walks" the reader through all steps involved in testing the SEM model including: an explanation of the issues addressed illustrated and annotated testing of the hypothesized and post hoc models expl

  18. Improving Web Learning through model Optimization using Bootstrap for a Tour-Guide Robot

    Directory of Open Access Journals (Sweden)

    Rafael León

    2012-09-01

    Full Text Available We perform a review of Web Mining techniques and we describe a Bootstrap Statistics methodology applied to pattern model classifier optimization and verification for Supervised Learning for Tour-Guide Robot knowledge repository management. It is virtually impossible to test thoroughly Web Page Classifiers and many other Internet Applications with pure empirical data, due to the need for human intervention to generate training sets and test sets. We propose using the computer-based Bootstrap paradigm to design a test environment where they are checked with better reliability

  19. Hydro-economic modeling with aquifer-river interactions to guide sustainable basin management

    Science.gov (United States)

    Kahil, Mohamed Taher; Ward, Frank A.; Albiac, Jose; Eggleston, Jack; Sanz, David

    2016-08-01

    Policymakers in arid and semiarid basins face hard choices on water policies needed for adaptation to climate change. Hydro-economic modeling is a state-of-the art approach that can be used to guide the design and implementation of these policies in basins. A major gap in developments of hydro-economic modeling to date has been the weak integration of physically-based representations of water sources and uses such as the interaction between ground and surface water resources, to inform complex basin scale policy choices. This paper presents an integrated hydro-economic modeling framework to address this gap with application to an important and complex river basin in Spain, the Jucar basin, for the assessment of a range of climate change scenarios and policy choices. Results indicate that in absence of adequate policies protecting water resources and natural ecosystems, water users will strategically deplete reservoirs, aquifers and river flows for short-term adaptation to climate change, disregarding the impacts on the environment and future human activities. These impacts can be addressed by implementing sustainable management policies. However, these policies could have disproportionate costs for some stakeholders groups, and their opposition may undermine attempts at sustainable policy. These tradeoffs among water policy choices are important guides to the design of policies aimed at basin-wide adaptation to climate change.

  20. Parameter-free methods distinguish Wnt pathway models and guide design of experiments

    KAUST Repository

    MacLean, Adam L.

    2015-02-17

    The canonical Wnt signaling pathway, mediated by β-catenin, is crucially involved in development, adult stem cell tissue maintenance, and a host of diseases including cancer. We analyze existing mathematical models of Wnt and compare them to a new Wnt signaling model that targets spatial localization; our aim is to distinguish between the models and distill biological insight from them. Using Bayesian methods we infer parameters for each model from mammalian Wnt signaling data and find that all models can fit this time course. We appeal to algebraic methods (concepts from chemical reaction network theory and matroid theory) to analyze the models without recourse to specific parameter values. These approaches provide insight into aspects of Wnt regulation: the new model, via control of shuttling and degradation parameters, permits multiple stable steady states corresponding to stem-like vs. committed cell states in the differentiation hierarchy. Our analysis also identifies groups of variables that should be measured to fully characterize and discriminate between competing models, and thus serves as a guide for performing minimal experiments for model comparison.

  1. Dynamic Model for Hydro-Turbine Generator Units Based on a Database Method for Guide Bearings

    Directory of Open Access Journals (Sweden)

    Yong Xu

    2013-01-01

    Full Text Available A suitable dynamic model of rotor system is of great significance not only for supplying knowledge of the fault mechanism, but also for assisting in machine health monitoring research. Many techniques have been developed for properly modeling the radial vibration of large hydro-turbine generator units. However, an applicable dynamic model has not yet been reported in literature due to the complexity of the boundary conditions and exciting forces. In this paper, a finite element (FE rotor dynamic model of radial vibration taking account of operating conditions is proposed. A brief and practical database method is employed to model the guide bearing. Taking advantage of the method, rotating speed and bearing clearance can be considered in the model. A novel algorithm, which can take account of both transient and steady-state analysis, is proposed to solve the model. Dynamic response for rotor model of 125 MW hydro-turbine generator units in Gezhouba Power Station is simulated. Field data from Optimal Maintenance Information System for Hydro power plants (HOMIS are analyzed compared with the simulation. Results illustrate the application value of the model in providing knowledge of the fault mechanism and in failure diagnosis.

  2. Mathematical programming model for the optimization of nutritional ...

    African Journals Online (AJOL)

    The use of a mathematical programming model for determining optimal nutritional strategy for a dairy cow is described. Mixed Integer Programming (MIP) may be used to fit curvilinear functions, such as the changes in the nutrient requirements of the cow, into a standard mathematical programme. The model determines the.

  3. Modeling the effects of study abroad programs on college students

    Science.gov (United States)

    Alvin H. Yu; Garry E. Chick; Duarte B. Morais; Chung-Hsien Lin

    2009-01-01

    This study explored the possibility of modeling the effects of a study abroad program on students from a university in the northeastern United States. A program effect model was proposed after conducting an extensive literature review and empirically examining a sample of 265 participants in 2005. Exploratory factor analysis (EFA), confirmatory factor analysis (CFA),...

  4. Process of a cyclotron modeling with SNOP program

    International Nuclear Information System (INIS)

    Smirnov, V.L.

    2015-01-01

    The description of the SNOP program developed in JINR and intended for numerical modeling of a beam dynamics in accelerating setups of cyclotron type is presented. The main methods of work with program components, and also stages of numerical modeling of a cyclotron, the analysis of the main characteristics of the accelerated bunch by means of the SNOP are given. The explanation of some algorithms and procedures used in the program is given. [ru

  5. Prevention That Works! A Guide for Developing School-Based Drug and Violence Prevention Programs.

    Science.gov (United States)

    Knowles, Cynthia R.

    This book helps educators produce assessments of their schools' drug and violence prevention programs. It contains over 30 separate resources that can be adapted to specific evaluations (e.g., sample youth and adult participant feedback sheets, sample classroom observation sheets and teacher implementation logs, sample en-route participant…

  6. Louis L'Amour's American West. A Sound Filmstrip Program. Study Guide.

    Science.gov (United States)

    Peters, John; Peters, Frances

    Adapted from the motion picture based on two of Louis L'Amour's novels of the American West, "The Daybreakers" and "Sackett," this filmstrip program will help secondary students interpret the meaning of the frontier experience in American history. In the first three filmstrips--"Heading West,""Staking…

  7. Smallfry Smiles: A Guide for Teaching Dental Health in Community Care Programs.

    Science.gov (United States)

    Johnson, Alice; And Others

    This publication has been designed to help nurses, teachers, volunteers, health administrators, social workers, and other individuals in the community in improving dental care instruction for the children in a community dental care program. The publication is based on the premise that availability of dental care services does not necessarily…

  8. Marketing and Retailing. A Curriculum Guide for a Two-Year Postsecondary Program.

    Science.gov (United States)

    Overton, R. Jean; Proffitt, Sally

    This manual was developed to provide a comprehensive curriculum guideline for postsecondary marketing and retailing programs. It contains competence-based materials and integrates the Interstate Distributive Education Curriculum Consortium (IDECC) Learning Activity Packages into the curriculum. The first of seven chapters in this manual presents…

  9. Guide to development of a scalar massive parallel programming on Paragon

    Energy Technology Data Exchange (ETDEWEB)

    Ueshima, Yutaka; Arakawa, Takuya; Sasaki, Akira [Japan Atomic Energy Research Inst., Neyagawa, Osaka (Japan). Kansai Research Establishment; Yokota, Hisasi

    1998-10-01

    Parallel calculations using more than hundred computers had begun in Japan only several years ago. The Intel Paragon XP/S 15GP256 , 75MP834 were introduced as pioneers in Japan Atomic Energy Research Institute (JAERI) to pursue massive parallel simulations for advanced photon and fusion researches. Recently, large number of parallel programs have been transplanted or newly produced to perform the parallel calculations with those computers. However, these programs are developed based on software technologies for conventional super computer, therefore they sometimes cause troubles in the massive parallel computing. In principle, when programs are developed under different computer and operating system (OS), prudent directions and knowledge are needed. However, integration of knowledge and standardization of environment are quite difficult because number of Paragon system and Paragon`s users are very small in Japan. Therefore, we summarized information which was got through the process of development of a massive parallel program in the Paragon XP/S 75MP834. (author)

  10. A Guide for the Management of Special Education Programs. 3.0 Task Data Tables.

    Science.gov (United States)

    Santa Cruz County Superintendent of Schools, CA.

    The third document in an eight-part series on a task-based management system for special education programs presented field-gathered data (organized in the form of summary tables) on task time distribution, reported responsibility distribution, and suggested responsibility distribution for a wide range of tasks. Task time distribution charts…

  11. Groundwater Contamination. Instructor Guide. Working for Clean Water: An Information Program for Advisory Groups.

    Science.gov (United States)

    Cole, Charles A.

    Described is a presentation and learning session on groundwater, which is intended to educate advisory groups interested in improving water quality decision making. Among the areas addressed are the importance of groundwater, sources of contamination, and groundwater pollution control programs. These materials are part of the Working for Clean…

  12. A free plate model can predict guided modes propagating in tubular bone-mimicking phantoms.

    Science.gov (United States)

    Minonzio, Jean-Gabriel; Foiret, Josquin; Moilanen, Petro; Pirhonen, Jalmari; Zhao, Zuomin; Talmant, Maryline; Timonen, Jussi; Laugier, Pascal

    2015-01-01

    The goal of this work was to show that a non-absorbing free plate model can predict with a reasonable accuracy guided modes measured in bone-mimicking phantoms that have circular cross-section. Experiments were carried out on uncoated and coated phantoms using a clinical axial transmission setup. Adjustment of the plate model to the experimental data yielded estimates for the waveguide characteristics (thickness, bulk wave velocities). Fair agreement was achieved over a frequency range of 0.4 to 1.6 MHz. A lower accuracy observed for the thinnest bone-mimicking phantoms was caused by limitations in the wave number measurements rather than by the model itself.

  13. Radon transport modelling: User's guide to RnMod3d

    DEFF Research Database (Denmark)

    Andersen, Claus Erik

    2000-01-01

    decay, diffusion and advection of radon can be solved. Moisture is included in the model, and partitioning ofradon between air, water and soil grains (adsorption) is taken into account. Most parameters can change in time and space, and transport parameters (diffusivity and permeability) may......RnMod3d is a numerical computer model of soil-gas and radon transport in porous media. It can be used, for example, to study radon entry from soil into houses in response to indoor-outdoor pressure differences or changes in atmospheric pressure. It canalso be used for flux calculations of radon...... be anisotropic. This guide includes benchmark tests based on simpleproblems with known solutions. RnMod3d has also been part of an international model intercomparison exercise based on more complicated problems without known solutions. All tests show that RnMod3d gives results of good quality....

  14. INTERLINE, a railroad routing model: program description and user's manual

    International Nuclear Information System (INIS)

    Peterson, B.E.

    1985-11-01

    INTERLINE is an interactive computer program that finds likely routes for shipments over the US railroad system. It is based on a shortest path algorithm modified both to reflect the nature of railroad company operations and to accommodate computer resource limitations in dealing with a large transportation network. The first section of the report discusses the nature of railroad operations and routing practices in the United States, including the tendency to concentrate traffic on a limited number of mainlines, the competition for traffic by different companies operating in the same corridors, and the tendency of originating carriers to retain traffic on their systems before transferring it to terminating carriers. The theoretical foundation and operation of shortest path algorithms are described, as well as the techniques used to simulate actual operating practices within this framework. The second section is a user's guide that describes the program operation and data structures, program features, and user access. 11 refs., 11 figs

  15. User's Guide to Handlens - A Computer Program that Calculates the Chemistry of Minerals in Mixtures

    Science.gov (United States)

    Eberl, D.D.

    2008-01-01

    HandLens is a computer program, written in Excel macro language, that calculates the chemistry of minerals in mineral mixtures (for example, in rocks, soils and sediments) for related samples from inputs of quantitative mineralogy and chemistry. For best results, the related samples should contain minerals having the same chemical compositions; that is, the samples should differ only in the proportions of minerals present. This manual describes how to use the program, discusses the theory behind its operation, and presents test results of the program's accuracy. Required input for HandLens includes quantitative mineralogical data, obtained, for example, by RockJock analysis of X-ray diffraction (XRD) patterns, and quantitative chemical data, obtained, for example, by X-ray florescence (XRF) analysis of the same samples. Other quantitative data, such as sample depth, temperature, surface area, also can be entered. The minerals present in the samples are selected from a list, and the program is started. The results of the calculation include: (1) a table of linear coefficients of determination (r2's) which relate pairs of input data (for example, Si versus quartz weight percents); (2) a utility for plotting all input data, either as pairs of variables, or as sums of up to eight variables; (3) a table that presents the calculated chemical formulae for minerals in the samples; (4) a table that lists the calculated concentrations of major, minor, and trace elements in the various minerals; and (5) a table that presents chemical formulae for the minerals that have been corrected for possible systematic errors in the mineralogical and/or chemical analyses. In addition, the program contains a method for testing the assumption of constant chemistry of the minerals within a sample set.

  16. Procedural guide for modelling and analyzing the flight characteristics of a helicopter design using Flightlab

    OpenAIRE

    McVaney, Gary P.

    1993-01-01

    Approved for public release; distribution is unlimited. This thesis presents one method for modelling and analyzing a helicopter design using Flightlab. Flightlab is a computer program that provides for engineering design, analysis and simulation of aircraft using non-linear dynamic modeling techniques. The procedure to model a single main rotor helicopter is outlined using the sample helicopter design in the book 'Helicopter Performance, Stability, and Control' by Ray Prouty. The analysis...

  17. Adaptive dose-finding studies: a review of model-guided phase I clinical trials.

    Science.gov (United States)

    Iasonos, Alexia; O'Quigley, John

    2014-08-10

    We provide a comprehensive review of adaptive phase I clinical trials in oncology that used a statistical model to guide dose escalation to identify the maximum-tolerated dose (MTD). We describe the clinical setting, practical implications, and safety of such applications, with the aim of understanding how these designs work in practice. We identified 53 phase I trials published between January 2003 and September 2013 that used the continual reassessment method (CRM), CRM using escalation with overdose control, or time-to-event CRM for late-onset toxicities. Study characteristics, design parameters, dose-limiting toxicity (DLT) definition, DLT rate, patient-dose allocation, overdose, underdose, sample size, and trial duration were abstracted from each study. In addition, we examined all studies in terms of safety, and we outlined the reasons why escalations occur and under what circumstances. On average, trials accrued 25 to 35 patients over a 2-year period and tested five dose levels. The average DLT rate was 18%, which is lower than in previous reports, whereas all levels above the MTD had an average DLT rate of 36%. On average, 39% of patients were treated at the MTD, and 74% were treated at either the MTD or an adjacent level (one level above or below). This review of completed phase I studies confirms the safety and generalizability of model-guided, adaptive dose-escalation designs, and it provides an approach for using, interpreting, and understanding such designs to guide dose escalation in phase I trials. © 2014 by American Society of Clinical Oncology.

  18. Redefining leadership education in graduate public health programs: prioritization, focus, and guiding principles.

    Science.gov (United States)

    Lachance, Jennifer A; Oxendine, Jeffrey S

    2015-03-01

    Public health program graduates need leadership skills to be effective in the complex, changing public health environment. We propose a new paradigm for schools of public health in which technical and leadership skills have equal priority as core competencies for graduate students. Leadership education should focus on the foundational skills necessary to effect change independent of formal authority, with activities offered at varying levels of intensity to engage different students. Leadership development initiatives should be practice based, process focused, interdisciplinary, diversity based, adaptive, experimental, innovative, and empowering, and they should encourage authenticity. Leadership training in graduate programs will help lay the groundwork for public health professionals to have an immediate impact in the workforce and to prioritize continuous leadership development throughout their careers.

  19. Redefining Leadership Education in Graduate Public Health Programs: Prioritization, Focus, and Guiding Principles

    Science.gov (United States)

    Oxendine, Jeffrey S.

    2015-01-01

    Public health program graduates need leadership skills to be effective in the complex, changing public health environment. We propose a new paradigm for schools of public health in which technical and leadership skills have equal priority as core competencies for graduate students. Leadership education should focus on the foundational skills necessary to effect change independent of formal authority, with activities offered at varying levels of intensity to engage different students. Leadership development initiatives should be practice based, process focused, interdisciplinary, diversity based, adaptive, experimental, innovative, and empowering, and they should encourage authenticity. Leadership training in graduate programs will help lay the groundwork for public health professionals to have an immediate impact in the workforce and to prioritize continuous leadership development throughout their careers. PMID:25706021

  20. A heterogeneous tissue model for treatment planning for magnetic resonance-guided laser interstitial thermal therapy.

    Science.gov (United States)

    Mitchell, Drew; Fahrenholtz, Samuel; MacLellan, Christopher; Bastos, Dhiego; Rao, Ganesh; Prabhu, Sujit; Weinberg, Jeffrey; Hazle, John; Stafford, Jason; Fuentes, David

    2018-02-05

    We evaluated a physics-based model for planning for magnetic resonance-guided laser interstitial thermal therapy for focal brain lesions. Linear superposition of analytical point source solutions to the steady-state Pennes bioheat transfer equation simulates laser-induced heating in brain tissue. The line integral of the photon attenuation from the laser source enables computation of the laser interaction with heterogeneous tissue. Magnetic resonance thermometry data sets (n = 31) were used to calibrate and retrospectively validate the model's thermal ablation prediction accuracy, which was quantified by the Dice similarity coefficient (DSC) between model-predicted and measured ablation regions (T > 57 °C). A Gaussian mixture model was used to identify independent tissue labels on pre-treatment anatomical magnetic resonance images. The tissue-dependent optical attenuation coefficients within these labels were calibrated using an interior point method that maximises DSC agreement with thermometry. The distribution of calibrated tissue properties formed a population model for our patient cohort. Model prediction accuracy was cross-validated using the population mean of the calibrated tissue properties. A homogeneous tissue model was used as a reference control. The median DSC values in cross-validation were 0.829 for the homogeneous model and 0.840 for the heterogeneous model. In cross-validation, the heterogeneous model produced a DSC higher than that produced by the homogeneous model in 23 of the 31 brain lesion ablations. Results of a paired, two-tailed Wilcoxon signed-rank test indicated that the performance improvement of the heterogeneous model over that of the homogeneous model was statistically significant (p < 0.01).