WorldWideScience

Sample records for model production systems

  1. Conceptual Modelling of Complex Production Systems

    Directory of Open Access Journals (Sweden)

    Nenad Perši

    2008-12-01

    Full Text Available Complex system dynamics, structure and behaviour performances call for a wide range of methods, algorithms and tools to reach a model capable of finding optimal performing parameters. In the modelling process, it is up to the analyst to select the appropriate combination of methods, algorithms and tools to express significant system performances. Such a methodology for designing complex systems should be based upon conceptual modelling to perform a sensitive analysis of different system levels and views, allowing system representations for developing computer models.Complex systems, such as business systems with a continuous-discrete production process, require a well organised supply chain highly reactive to production assortment changes. Aligning two different production components distinctive in their behaviour is especially delicate at the production parameters transition point. Such system performances require distinctive designing methods that can follow the double nature of the production process behaviour in accordance with their entities dynamics caused by assortment changes. Consequently, such systems need different conceptual presentations for their purpose to be realized from different views and aspects.

  2. Oxygen production System Models for Lunar ISRU

    Science.gov (United States)

    Santiago-Maldonado, Edgardo

    2007-01-01

    In-Situ Resource Utilization (ISRU) seeks to make human space exploration feasible; by using available resources from a planet or the moon to produce consumables, parts, and structures that otherwise would be brought from Earth. Producing these in situ reduces the mass of such that must be launched and doing so allows more payload mass' for each mission. The production of oxygen from lunar regolith, for life support and propellant, is one of the tasks being studied under ISRU. NASA is currently funding three processes that have shown technical merit for the production of oxygen from regolith: Molten Salt Electrolysis, Hydrogen Reduction of Ilmenite, and Carbothermal Reduction. The ISRU program is currently developing system models of, the , abovementioned processes to: (1) help NASA in the evaluation process to select the most cost-effective and efficient process for further prototype development, (2) identify key parameters, (3) optimize the oxygen production process, (4) provide estimates on energy and power requirements, mass and volume.of the system, oxygen production rate, mass of regolith required, mass of consumables, and other important parameters, and (5) integrate into the overall end-to-end ISRU system model, which could be integrated with mission architecture models. The oxygen production system model is divided into modules that represent unit operations (e.g., reactor, water electrolyzer, heat exchanger). Each module is modeled theoretically using Excel and Visual Basic for Applications (VBA), and will be validated using experimental data from on-going laboratory work. This modularity (plug-n-play) feature of each unit operation allows the use of the same model on different oxygen production systems simulations resulting in comparable results. In this presentation, preliminary results for mass, power, volume will be presented along with brief description of the oxygen production system model.

  3. Modelling Product Families for Product Configuration Systems with Product Variant Master

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

    2010-01-01

    -cards for modelling and visualising the parts and properties of a complete product family. The modelling techniques include: Customer, engineering and part views on the product assortment to model the properties, functions and structure of the product family. This also makes it possible to map the links between......This article presents an evaluation of applying a suggested method for modelling product families for product configuration based on theory for modelling mechanical products,systems theory and object-oriented modelling. The modelling technique includes a so-called product variant master and CRC...... the three views. Modelling of characteristics of the product variants in a product family Modelling of constraints between parts in the product family Visualisation of the entire product family on a poster e.g. 1x2 meters The product variant master and CRC-cards are means to bridge the gap between domain...

  4. Design, product structuring and modelling of mechatronic products and systems

    DEFF Research Database (Denmark)

    Conrad, Finn; Sørensen, Torben

    2003-01-01

    Information Technology offers software and hardware for improvement of the engineering design, structuring and control systems, and industrial applications. The latest progress in IT makes integration of an overall design and manufacturing IT- concept feasible and commercially attractive. An IT......-tool concept for modelling, simulation and design of mechatronic products and systems is proposed in this paper. It built on results from a Danish mechatronic research program on intelligent motion control as well as from the Esprit project SWING on IT-tools for rapid prototyping of fluid power components...

  5. Description, Modelling and Design of Production Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Rudolph, Carsten

    1997-01-01

    Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better ma...

  6. Conceptual Modelling for Product Configuration Systems

    DEFF Research Database (Denmark)

    Shafiee, Sara

    Product Configuration Systems (PCS), have been proposed as the solution both by researchers and practitioners and various benefits are mentioned from utilizing PCSs. Based on the latest literature, there are challenges reported in all phases of PCS projects including planning, development......, and documentation. Moreover, the challenges become more serious when it involves complicated products/processes in engineer-to-order (ETO) companies. The purpose of this thesis is to contribute to the existing knowledge of managing PCS projects by proposing frameworks and tools to address some of the main...... challenges. First, this research focuses on the reported benefits and challenges in different phases of PCS projects aligned with the gaps in the current literature. Second, the study presents a survey in order to have a comprehensive overview to assess the most important challenges in the area. Third...

  7. An integrated production, inventory and preventive maintenance model for a multi-product production system

    International Nuclear Information System (INIS)

    Liu, Xuejuan; Wang, Wenbin; Peng, Rui

    2015-01-01

    This paper considers a production system that can produce multiple products alternately. Products go through the system in a sequence and a complete run of all products forms a production cycle. An integrated production, inventory and preventive maintenance model is constructed, which is characterized by the delay-time concept. Two different situations are studied based on whether the unqualified products and downtime caused by the failures of the system, set-up and preventive maintenance can be ignored or not. Three cases are considered for each situation, depending on the position of the preventive maintenance epochs: the first case, where preventive maintenance is carried out at the end of each production cycle; the second case, where preventive maintenance is carried out at each set-up time of the products; and the third case, where preventive maintenance is carried out at some set-up times only, since it may not always be optimal to carry out preventive maintenance at the end of the production cycle or at each set-up time. The modeling objectives are to find the optimal number of production cycles per year and the optimal position of preventive maintenance that will maximize the expected profit per unit time. Numerical examples, using real data, are presented to illustrate the model. - Highlights: • We propose an integrated economic production quantity and preventive maintenance model. • The situation that multiple products are produced on the same system alternately is studied. • Two situations are studied based on whether the downtime and the product quality can be ignored or not. • We use enumeration method and analytical method to select the optimal preventive maintenance policy, respectively. • We use the delay-time concept to model the preventive maintenance policy

  8. REVIEW OF AQUACULTURAL PRODUCTION SYSTEM MODELS

    African Journals Online (AJOL)

    user

    The success and profitability of aquaculture production is highly dependent on the proper management employed during the culture period. This management is synonymous with water management since water of suitable quality and quantity is a pre-requisite for any successful aquacultural production. The knowledge of ...

  9. REVIEW OF AQUACULTURAL PRODUCTION SYSTEM MODELS ...

    African Journals Online (AJOL)

    The success and profitability of aquaculture production is highly dependent on the proper management employed during the culture period. This management is synonymous with water management since water of suitable quality and quantity is a pre-requisite for any successful aquacultural production. The knowledge of ...

  10. A proposed computer system on Kano model for new product ...

    African Journals Online (AJOL)

    A case study is conducted for system verification by an attractive attribute regarding Kano model about an automobile. Keywords: Kano Model, Attributes of Product, New Product Development and Innovation, Monte-Carlo Simulation International Journal of Engineering, Science and Technology, Vol. 2, No. 9, 2010, pp. 1-12 ...

  11. Technology Model of Aquaculture Production System

    Science.gov (United States)

    Hor, K. W.; Salleh, S. M.; Abdullah; Ezree, Mohd; Zaman, I.; Hatta, M. H.; Ahmad, S.; Ismail, A. E.; Mahmud, W. A. W.

    2017-10-01

    The high market demand has led to the rapid growth in fish farming. The young generation are inexperienced in determining the estimated results of fish farming and the preparation of fish pond during the period of fish farming. These need a complete guide as their reference which includes the knowledge of fish farming. The main objective of this project is to develop a practical design of real pond appropriate with aquaculture technology and fish farming production. There are three parts of study in this project which include fish farming cage, growth of fish and water quality of fish farming pond. Few of experiments were carried out involved the collection data in terms of growth of fish and parameters of water quality.

  12. Systems Engineering Metrics: Organizational Complexity and Product Quality Modeling

    Science.gov (United States)

    Mog, Robert A.

    1997-01-01

    Innovative organizational complexity and product quality models applicable to performance metrics for NASA-MSFC's Systems Analysis and Integration Laboratory (SAIL) missions and objectives are presented. An intensive research effort focuses on the synergistic combination of stochastic process modeling, nodal and spatial decomposition techniques, organizational and computational complexity, systems science and metrics, chaos, and proprietary statistical tools for accelerated risk assessment. This is followed by the development of a preliminary model, which is uniquely applicable and robust for quantitative purposes. Exercise of the preliminary model using a generic system hierarchy and the AXAF-I architectural hierarchy is provided. The Kendall test for positive dependence provides an initial verification and validation of the model. Finally, the research and development of the innovation is revisited, prior to peer review. This research and development effort results in near-term, measurable SAIL organizational and product quality methodologies, enhanced organizational risk assessment and evolutionary modeling results, and 91 improved statistical quantification of SAIL productivity interests.

  13. Integrate System Modeling for Design and Production Planning of High Quality Products Considering Failure Data

    Science.gov (United States)

    Aoyama, Kazuhiro; Koga, Tsuyoshi

    2009-07-01

    Since the product recall problem is recently observed, realizing design and production activities that can prevent occurrences of a product failure has been becoming a serious issue. This paper proposes "the Synthetic design approach of a product and a production process which enables to reduce occurrences of a product failure from the initial stage of a product development." In order to realize this proposed concept as a specific system, the integrated model of the failure information in the design and production is introduced. This paper shows some examples of design and production for a circuit breaker and an automobile with considering a design error and a production failure using developed prototype system.

  14. Sustainable economic production quantity models for inventory systems with shortage

    DEFF Research Database (Denmark)

    Taleizadeh, Ata Allah; Soleymanfar, Vahid Reza; Govindan, Kannan

    2018-01-01

    (EPQ). The theoretical sustainable EOQ and EPQ models are basic models that ignore many real-life conditions such as the possibility of stock-out in inventory systems. In this paper, we develop four new sustainable economic production quantity models that consider different shortage situations. To find...... optimal values of inventory system variables, we solve four independent profit maximization problems for four different situations. These proposed models include a basic model in which shortages are not allowed, and when shortages are allowed, the lost sale, full backordering and partial backordering...... models can be selected by operations managers depending on the manufacturer's motivation to improve service levels. We have also proposed an algorithm for determining optimum values of the decision variables for these sustainable economic production quantity models. Finally, the formulated models...

  15. A Product Development Decision Model for Cockpit Weather Information System

    Science.gov (United States)

    Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin; Johnson, Edward J., Jr. (Technical Monitor)

    2003-01-01

    There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

  16. A Product Development Decision Model for Cockpit Weather Information Systems

    Science.gov (United States)

    Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin

    2003-01-01

    There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

  17. An inventory control model for biomass dependent production systems

    International Nuclear Information System (INIS)

    Grado, S.C.; Strauss, C.H.

    1993-01-01

    The financial performance of a biomass dependent production system was critiqued based on the development and validation of an inventory control model. Dynamic programming was used to examine the constraints and capabilities of producing ethanol from various biomass crops. In particular, the model evaluated the plantation, harvest, and manufacturing components of a woody biomass supply system. The optimum wood to ethanol production scheme produced 38 million litres of ethanol in the harvest year, at 13.6 million litre increase over the least optimal policy as demonstrated in the dynamic programming results. The system produced ethanol at a delivered cost of $0.38 L -1 which was consistent with the unit costs from other studies. Nearly 60% of the delivered costs were in ethanol production. The remaining costs were attributed to growing biomass (14%), harvest and shipment of the crop (18%), storage of the raw material and finished product (7%) and open-quotes lost salesclose quotes (2%). Inventory control, in all phases of production, proved to be an important cost consideration throughout the model. The model also analyzed the employment of alternative harvesting policies and the use of different or multiple feedstocks. A comparison between the least cost wood system and an even cut wood system further revealed the benefits of using an inventory control system

  18. Modelling production system architectures in the early phases of product development

    DEFF Research Database (Denmark)

    Guðlaugsson, Tómas Vignir; Ravn, Poul Martin; Mortensen, Niels Henrik

    2016-01-01

    on – leading to an improved basis for prioritizing activities in the project. Requirements for the contents of the framework are presented, and literature on production and system models is reviewed. The production system architecture modelling framework is founded on methods and approaches in literature......This article suggests a framework for modelling a production system architecture in the early phases of product development.The challenge in these phases is that the products to be produced are not completely defined and yet decisions need to be made early in the process on what investments...... are needed and appropriate to enable determination of obtainable product quality. In order to meet this challenge, it is suggested that a visual modelling framework be adopted that clarifies which product and production features are known at a specific time of the project and which features will be worked...

  19. Biotechonomy System Dynamics Modelling: Sustainability of Pellet Production

    OpenAIRE

    Andra Blumberga; Armands Gravelsins; Haralds Vigants; Dagnija Blumberga

    2017-01-01

    The paper discovers biotechonomy development analysis by use of system dynamics modelling. The research is connected with investigations of biomass application for production of bioproducts with higher added value. The most popular bioresource is wood, and therefore, the main question today is about future development and eco-design of products. The paper emphasizes and evaluates energy sector which is open for use of wood logs, wood chips, wood pellets and so on. The main aim for this resear...

  20. Product Lifecycle Management Architecture: A Model Based Systems Engineering Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Noonan, Nicholas James [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-07-01

    This report is an analysis of the Product Lifecycle Management (PLM) program. The analysis is centered on a need statement generated by a Nuclear Weapons (NW) customer. The need statement captured in this report creates an opportunity for the PLM to provide a robust service as a solution. Lifecycles for both the NW and PLM are analyzed using Model Based System Engineering (MBSE).

  1. Next Generation Agricultural System Data, Models and Knowledge Products: Introduction

    Science.gov (United States)

    Antle, John M.; Jones, James W.; Rosenzweig, Cynthia E.

    2016-01-01

    Agricultural system models have become important tools to provide predictive and assessment capability to a growing array of decision-makers in the private and public sectors. Despite ongoing research and model improvements, many of the agricultural models today are direct descendants of research investments initially made 30-40 years ago, and many of the major advances in data, information and communication technology (ICT) of the past decade have not been fully exploited. The purpose of this Special Issue of Agricultural Systems is to lay the foundation for the next generation of agricultural systems data, models and knowledge products. The Special Issue is based on a 'NextGen' study led by the Agricultural Model Intercomparison and Improvement Project (AgMIP) with support from the Bill and Melinda Gates Foundation.

  2. ISRU System Model Tool: From Excavation to Oxygen Production

    Science.gov (United States)

    Santiago-Maldonado, Edgardo; Linne, Diane L.

    2007-01-01

    In the late 80's, conceptual designs for an in situ oxygen production plant were documented in a study by Eagle Engineering [1]. In the "Summary of Findings" of this study, it is clearly pointed out that: "reported process mass and power estimates lack a consistent basis to allow comparison." The study goes on to say: "A study to produce a set of process mass, power, and volume requirements on a consistent basis is recommended." Today, approximately twenty years later, as humans plan to return to the moon and venture beyond, the need for flexible up-to-date models of the oxygen extraction production process has become even more clear. Multiple processes for the production of oxygen from lunar regolith are being investigated by NASA, academia, and industry. Three processes that have shown technical merit are molten regolith electrolysis, hydrogen reduction, and carbothermal reduction. These processes have been selected by NASA as the basis for the development of the ISRU System Model Tool (ISMT). In working to develop up-to-date system models for these processes NASA hopes to accomplish the following: (1) help in the evaluation process to select the most cost-effective and efficient process for further prototype development, (2) identify key parameters, (3) optimize the excavation and oxygen production processes, and (4) provide estimates on energy and power requirements, mass and volume of the system, oxygen production rate, mass of regolith required, mass of consumables, and other important parameters. Also, as confidence and high fidelity is achieved with each component's model, new techniques and processes can be introduced and analyzed at a fraction of the cost of traditional hardware development and test approaches. A first generation ISRU System Model Tool has been used to provide inputs to the Lunar Architecture Team studies.

  3. Product State Models in Holonic shop floor control systems

    DEFF Research Database (Denmark)

    Langer, Gilad; Sørensen, Christian; Larsen, Michael Holm

    1999-01-01

    This paper reviews the concepts of the product state models as an integrated database for Holonic Shop Floor Control. One of the requirements of agility is to be able to realise real-time control of manufacturing systems based on the actual state of the system and especially the state of its...... workpieces. The Product State Model (PSM) is an integrated object oriented database, which contains the dynamic data concerning the actual state of the workpieces during the manufacturing processing. It is integrated in the HoMuCS architecture by aggregating a PSM in each order holon. The paper outlines...... this as well as the general concepts of the PSM and the important parts of the HoMuCS system architecture. Finally the integration of a PSM is illustrated in a case study based on an industrial case at the Odense Steel Shipyard Ltd....

  4. Performance modelling for product development of advanced window systems

    DEFF Research Database (Denmark)

    Appelfeld, David

    The research presented in this doctoral thesis shows how the product development (PD) of Complex Fenestration Systems (CFSs) can be facilitated by computer-based analysis to improve the energy efficiency of fenestration systems as well as to improve the indoor environment. The first chapter defines...... and methods,which can address interrelated performance parameters of CFS, are sought. It is possible to evaluate such systems by measurements, however the high cost and complexity of the measurements are limiting factors. The studies in this thesis confirmed that the results from the performance measurements...... of CFSs can be interpreted by simulations and hence simulations can be used for the performance analysis of new CFSs. An advanced simulation model must be often developed and needs to be validated by measurements before the model can be reused. The validation of simulations against the measurements proved...

  5. Product Service Systems

    DEFF Research Database (Denmark)

    Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

  6. A study for production simulation model generation system based on data model at a shipyard

    Directory of Open Access Journals (Sweden)

    Myung-Gi Back

    2016-09-01

    Full Text Available Simulation technology is a type of shipbuilding product lifecycle management solution used to support production planning or decision-making. Normally, most shipbuilding processes are consisted of job shop production, and the modeling and simulation require professional skills and experience on shipbuilding. For these reasons, many shipbuilding companies have difficulties adapting simulation systems, regardless of the necessity for the technology. In this paper, the data model for shipyard production simulation model generation was defined by analyzing the iterative simulation modeling procedure. The shipyard production simulation data model defined in this study contains the information necessary for the conventional simulation modeling procedure and can serve as a basis for simulation model generation. The efficacy of the developed system was validated by applying it to the simulation model generation of the panel block production line. By implementing the initial simulation model generation process, which was performed in the past with a simulation modeler, the proposed system substantially reduced the modeling time. In addition, by reducing the difficulties posed by different modeler-dependent generation methods, the proposed system makes the standardization of the simulation model quality possible.

  7. Architecture Descriptions. A Contribution to Modeling of Production System Architecture

    DEFF Research Database (Denmark)

    Jepsen, Allan Dam; Hvam, Lars

    a proper understanding of the architecture phenomenon and the ability to describe it in a manner that allow the architecture to be communicated to and handled by stakeholders throughout the company. Despite the existence of several design philosophies in production system design such as Lean, that focus......The subject of this PhD dissertation is architecture-centric design and the description of production system architecture. Companies are facing demands for the development and production of new products at an ever increasing rate, as the market life of products decreases and the rate at which...... customers demand new product features and performance accelerates. Many of these companies are seeking to keep pace with market demands and the pressures of low cost production in other countries by adopting an architecture-centric or platform based approach to the design of their production systems...

  8. Improving Power System Modeling. A Tool to Link Capacity Expansion and Production Cost Models

    Energy Technology Data Exchange (ETDEWEB)

    Diakov, Victor [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cole, Wesley [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sullivan, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-11-01

    Capacity expansion models (CEM) provide a high-level long-term view at the prospects of the evolving power system. In simulating the possibilities of long-term capacity expansion, it is important to maintain the viability of power system operation in the short-term (daily, hourly and sub-hourly) scales. Production-cost models (PCM) simulate routine power system operation on these shorter time scales using detailed load, transmission and generation fleet data by minimizing production costs and following reliability requirements. When based on CEM 'predictions' about generating unit retirements and buildup, PCM provide more detailed simulation for the short-term system operation and, consequently, may confirm the validity of capacity expansion predictions. Further, production cost model simulations of a system that is based on capacity expansion model solution are 'evolutionary' sound: the generator mix is the result of logical sequence of unit retirement and buildup resulting from policy and incentives. The above has motivated us to bridge CEM with PCM by building a capacity expansion - to - production cost model Linking Tool (CEPCoLT). The Linking Tool is built to onset capacity expansion model prescriptions onto production cost model inputs. NREL's ReEDS and Energy Examplar's PLEXOS are the capacity expansion and the production cost models, respectively. Via the Linking Tool, PLEXOS provides details of operation for the regionally-defined ReEDS scenarios.

  9. Fuzzy production planning models for an unreliable production system with fuzzy production rate and stochastic/fuzzy demand rate

    Directory of Open Access Journals (Sweden)

    K. A. Halim

    2011-01-01

    Full Text Available In this article, we consider a single-unit unreliable production system which produces a single item. During a production run, the production process may shift from the in-control state to the out-of-control state at any random time when it produces some defective items. The defective item production rate is assumed to be imprecise and is characterized by a trapezoidal fuzzy number. The production rate is proportional to the demand rate where the proportionality constant is taken to be a fuzzy number. Two production planning models are developed on the basis of fuzzy and stochastic demand patterns. The expected cost per unit time in the fuzzy sense is derived in each model and defuzzified by using the graded mean integration representation method. Numerical examples are provided to illustrate the optimal results of the proposed fuzzy models.

  10. Agricultural production systems modelling and software: Current status and future prospects

    NARCIS (Netherlands)

    Holzworth, D.P.; Snow, V.; Janssen, S.J.C.; Athanasiadis, I.N.; Donatelli, M.; Hoogenboom, G.; White, J.W.; Thorburn, P.

    2015-01-01

    During the past decade, the application of agricultural production systems modelling has rapidly expanded while there has been less emphasis on model improvement. Cropping systems modelling has become agricultural modelling, incorporating new capabilities enabling analyses in the domains of

  11. PRODUCTION SYSTEM MODELING AND SIMULATION USING DEVS FORMALISM

    Directory of Open Access Journals (Sweden)

    Darío Amaya Hurtado

    Full Text Available This article presents the Discrete Event System Specification (DEVS formalism, in their atomic and coupled configurations; it is used for discrete event systems modeling and simulation. Initially this work describes the analysis of discrete event systems concepts and its applicability. Then a comprehensive description of the DEVS formalism structure is presented, in order to model and simulate an industrial process, taking into account changes in parameters such as process service time, each station storage systems structure and process tasks coupling. For the MatLab® simulation, the Simevents Toolbox was used for theoretical developments validation.

  12. Modeling methane emissions by cattle production systems in Mexico

    Science.gov (United States)

    Castelan-Ortega, O. A.; Ku Vera, J.; Molina, L. T.

    2013-12-01

    Methane emissions from livestock is one of the largest sources of methane in Mexico. The purpose of the present paper is to provide a realistic estimate of the national inventory of methane produced by the enteric fermentation of cattle, based on an integrated simulation model, and to provide estimates of CH4 produced by cattle fed typical diets from the tropical and temperate climates of Mexico. The Mexican cattle population of 23.3 million heads was divided in two groups. The first group (7.8 million heads), represents cattle of the tropical climate regions. The second group (15.5 million heads), are the cattle in the temperate climate regions. This approach allows incorporating the effect of diet on CH4 production into the analysis because the quality of forages is lower in the tropics than in temperate regions. Cattle population in every group was subdivided into two categories: cows (COW) and other type of cattle (OTHE), which included calves, heifers, steers and bulls. The daily CH4 production by each category of animal along an average production cycle of 365 days was simulated, instead of using a default emission factor as in Tier 1 approach. Daily milk yield, live weight changes associated with the lactation, and dry matter intake, were simulated for the entire production cycle. The Moe and Tyrrell (1979) model was used to simulate CH4 production for the COW category, the linear model of Mills et al. (2003) for the OTHE category in temperate regions and the Kurihara et al. (1999) model for the OTHE category in the tropical regions as it has been developed for cattle fed tropical diets. All models were integrated with a cow submodel to form an Integrated Simulation Model (ISM). The AFRC (1993) equations and the lactation curve model of Morant and Gnanasakthy (1989) were used to construct the cow submodel. The ISM simulates on a daily basis the CH4 production, milk yield, live weight changes associated with lactation and dry matter intake. The total daily CH

  13. Product/Service-Systems: Proposal for models and terminology

    DEFF Research Database (Denmark)

    Matzen, Detlef; Tan, Adrian; Andreasen, Mogens Myrup

    2005-01-01

    the environmental impacts of human consumption activity or optimise a company’s ability to cope with the influences arising from the emerging globalisation of economic and business activities. Since there has not been worked on a coherent terminology for the terms and concepts used in PSS research, the area remains...... very blurred and ill defined. This paper will try to identify the fundamental characteristics of PSS and propose a system of concepts that can be used to describe and discuss the phenomenon, for the purpose of developing new PSS solutions. Coming from a tradition of product development research...

  14. Production Planning and Measuring Method for Non Patterned Production System Using Stock Cutting Model

    OpenAIRE

    S. Homrossukon; D. Aromstain

    2009-01-01

    The simple methods used to plan and measure non patterned production system are developed from the basic definition of working efficiency. Processing time is assigned as the variable and used to write the equation of production efficiency. Consequently, such equation is extensively used to develop the planning method for production of interest using one-dimensional stock cutting problem. The application of the developed method shows that production efficiency and producti...

  15. Visual product architecture modelling for structuring data in a PLM system

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik

    2012-01-01

    The goal of this paper is to determine the role of a product architecture model to support communication and to form the basis for developing and maintaining information of product structures in a PLM system. This paper contains descriptions of a modelling tool to represent a product architecture...... in a company to support the development of a family of products, as well as the reasons leading to the use of the specific model and its terminology. The fundamental idea for using the architecture model is that an improved understanding of the whole product system, will lead to better decision making....... Moreover, it is discussed how the sometimes intangible elements and phenomena within an architecture model can be visually modeled in order to form the basis for a data model in a PLM system. © 2012 International Federation for Information Processing....

  16. New frontiers in information and production systems modelling and analysis incentive mechanisms, competence management, knowledge-based production

    CERN Document Server

    Novikov, Dmitry; Bakhtadze, Natalia; Zaikin, Oleg

    2016-01-01

    This book demonstrates how to apply modern approaches to complex system control in practical applications involving knowledge-based systems. The dimensions of knowledge-based systems are extended by incorporating new perspectives from control theory, multimodal systems and simulation methods.  The book is divided into three parts: theory, production system and information system applications. One of its main focuses is on an agent-based approach to complex system analysis. Moreover, specialised forms of knowledge-based systems (like e-learning, social network, and production systems) are introduced with a new formal approach to knowledge system modelling.   The book, which offers a valuable resource for researchers engaged in complex system analysis, is the result of a unique cooperation between scientists from applied computer science (mainly from Poland) and leading system control theory researchers from the Russian Academy of Sciences’ Trapeznikov Institute of Control Sciences.

  17. The formation models logistics management systems product distribution company

    OpenAIRE

    Palchyk, Ihor

    2014-01-01

    In the article describes the peculiarities of the management of the logistics systems, levels of logistic management. Formed scheme logistics-grid companies on the basis of different distribution channels and options sales - the sale of goods by the manufacturer (direct sales) and sales of goods intermediaries. The proposed direction (stages) management of the logistics system of the distribution system associated with the use of the individual management functions. Built client-oriented mode...

  18. Examining the impacts of increased corn production on groundwater quality using a coupled modeling system

    Science.gov (United States)

    This study demonstrates the value of a coupled chemical transport modeling system for investigating groundwater nitrate contamination responses associated with nitrogen (N) fertilizer application and increased corn production. The coupled Community Multiscale Air Quality Bidirect...

  19. Visual Product Architecture Modelling for Structuring Data in a PLM System

    OpenAIRE

    Bruun, Hans; Mortensen, Niels,

    2012-01-01

    The goal of this paper is to determine the role of a product architecture model to support communication and to form the basis for developing and maintaining information of product structures in a PLM system. This paper contains descriptions of a modelling tool to represent a product architecture in a company to support the development of a family of products, as well as the reasons leading to the use of the specific model and its terminology. The fundamental idea for using the architecture m...

  20. Unitary input DEA model to identify beef cattle production systems typologies

    Directory of Open Access Journals (Sweden)

    Eliane Gonçalves Gomes

    2012-08-01

    Full Text Available The cow-calf beef production sector in Brazil has a wide variety of operating systems. This suggests the identification and the characterization of homogeneous regions of production, with consequent implementation of actions to achieve its sustainability. In this paper we attempted to measure the performance of 21 livestock modal production systems, in their cow-calf phase. We measured the performance of these systems, considering husbandry and production variables. The proposed approach is based on data envelopment analysis (DEA. We used unitary input DEA model, with apparent input orientation, together with the efficiency measurements generated by the inverted DEA frontier. We identified five modal production systems typologies, using the isoefficiency layers approach. The results showed that the knowledge and the processes management are the most important factors for improving the efficiency of beef cattle production systems.

  1. Optimized production planning model for a multi-plant cultivation system under uncertainty

    Science.gov (United States)

    Ke, Shunkui; Guo, Doudou; Niu, Qingliang; Huang, Danfeng

    2015-02-01

    An inexact multi-constraint programming model under uncertainty was developed by incorporating a production plan algorithm into the crop production optimization framework under the multi-plant collaborative cultivation system. In the production plan, orders from the customers are assigned to a suitable plant under the constraints of plant capabilities and uncertainty parameters to maximize profit and achieve customer satisfaction. The developed model and solution method were applied to a case study of a multi-plant collaborative cultivation system to verify its applicability. As determined in the case analysis involving different orders from customers, the period of plant production planning and the interval between orders can significantly affect system benefits. Through the analysis of uncertain parameters, reliable and practical decisions can be generated using the suggested model of a multi-plant collaborative cultivation system.

  2. ABOUT THE INFORMATIZATION MANAGING OF THE PRODUCTION SYSTEM BASED ON THE MATRIX MODEL

    Directory of Open Access Journals (Sweden)

    Aleksandr V. Romanenko

    2016-06-01

    Full Text Available Introduction. The problem of formation and information management systems management of manufacturing system businesses is analyzed in the article. Existing schemes of the Russian economy increased demands for its efficiency. Stability integrative model business entity lifecycle requires a search for solutions based on new technologies in the organization and operation of information management systems. Results. On the basis of the analysis of their importance for sustainability of the entity components of its life cycle conclusions are made about the applicability of the matrix model to the production system management. Contradiction in the application of this management model are solved by separating the information on the basis of the state of product and process state. This division contributes to a better organization of the distribution of responsibility between the profit centers and cost centers. As an indicator of the efficiency of profit centers, it is proposed to use the ratio revenue net from the sale of products to the current value of the planned costs of its production. To assess the effectiveness of cost centers used index that is similar to profitability of fixed assets taking into account the cost of resources utilized by each cost center separately. Discussion and Conclusions. We analyze the relationship between goals management of the production system with the role of profit centers and cost centers. The proposed basis of the formation model information ensures the management of the production system, contributing to improve the quality of managerial decisions in implementing the competitive advantages of business entity.

  3. EFFECTIVE FACTORS AND MODEL SYSTEMS IN THE INDUSTRIAL PRODUCTION OF NISIN

    Directory of Open Access Journals (Sweden)

    Ömer ŞİMŞEK

    2007-01-01

    Full Text Available Nisin is the first bacteriocin identified in Lactococcus lactis and belongs to type 1 lanthibiotic group. High nisin production in cultured media is related with the composition of fermentation medium, pH, produced nisin concentration and most importantly growth amount of cell. For industrial purpose, batch, fed-batch and continue fermentation systems were developed by regarding these factors. Maintaining efficient production of nisin having important potential at preservation of foods is important for both industrial production and using as starter culture. In this review the fermentation factors at nisin production were outlined and constructed model systems were compared.

  4. Exploring agricultural production systems and their fundamental components with system dynamics modeling

    Science.gov (United States)

    Agricultural production in the United States is undergoing marked changes due to rapid shifts in consumer demands, input costs, and concerns for food safety and environmental impact. Agricultural production systems are comprised of multidimensional components and drivers that interact in complex wa...

  5. An Update on the Conceptual-Production Systems Model of Apraxia: Evidence from Stroke

    Science.gov (United States)

    Stamenova, Vessela; Black, Sandra E.; Roy, Eric A.

    2012-01-01

    Limb apraxia is a neurological disorder characterized by an inability to pantomime and/or imitate gestures. It is more commonly observed after left hemisphere damage (LHD), but has also been reported after right hemisphere damage (RHD). The Conceptual-Production Systems model (Roy, 1996) suggests that three systems are involved in the control of…

  6. Towards a New Generation of Agricultural System Data, Models and Knowledge Products: Design and Improvement

    Science.gov (United States)

    Antle, John M.; Basso, Bruno; Conant, Richard T.; Godfray, H. Charles J.; Jones, James W.; Herrero, Mario; Howitt, Richard E.; Keating, Brian A.; Munoz-Carpena, Rafael; Rosenzweig, Cynthia

    2016-01-01

    This paper presents ideas for a new generation of agricultural system models that could meet the needs of a growing community of end-users exemplified by a set of Use Cases. We envision new data, models and knowledge products that could accelerate the innovation process that is needed to achieve the goal of achieving sustainable local, regional and global food security. We identify desirable features for models, and describe some of the potential advances that we envisage for model components and their integration. We propose an implementation strategy that would link a "pre-competitive" space for model development to a "competitive space" for knowledge product development and through private-public partnerships for new data infrastructure. Specific model improvements would be based on further testing and evaluation of existing models, the development and testing of modular model components and integration, and linkages of model integration platforms to new data management and visualization tools.

  7. A cost prediction model for machine operation in multi-field production systems

    Directory of Open Access Journals (Sweden)

    Alessandro Sopegno

    Full Text Available ABSTRACT Capacity planning in agricultural field operations needs to give consideration to the operational system design which involves the selection and dimensioning of production components, such as machinery and equipment. Capacity planning models currently onstream are generally based on average norm data and not on specific farm data which may vary from year to year. In this paper a model is presented for predicting the cost of in-field and transport operations for multiple-field and multiple-crop production systems. A case study from a real production system is presented in order to demonstrate the model’s functionalities and its sensitivity to parameters known to be somewhat imprecise. It was shown that the proposed model can provide operation cost predictions for complex cropping systems where labor and machinery are shared between the various operations which can be individually formulated for each individual crop. By so doing, the model can be used as a decision support system at the strategic level of management of agricultural production systems and specifically for the mid-term design process of systems in terms of labor/machinery and crop selection conforming to the criterion of profitability.

  8. Thermal Heat and Power Production with Models for Local and Regional Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Saether, Sturla

    1999-07-01

    The primary goal of this thesis is the description and modelling of combined heat and power systems as well as analyses of thermal dominated systems related to benefits of power exchange. Large power plants with high power efficiency (natural gas systems) and heat production in local heat pumps can be favourable in areas with low infrastructure of district heating systems. This system is comparable with typical combined heat and power (CHP) systems based on natural gas with respect to efficient use of fuel energy. The power efficiency obtainable from biomass and municipal waste is relatively low and the advantage of CHP for this system is high compared to pure power production with local heat pumps for heat generation. The advantage of converting pure power systems into CHP systems is best for power systems with low power efficiency and heat production at low temperature. CHP systems are divided into two main groups according to the coupling of heat and power production. Some CHP systems, especially those with strong coupling between heat and power production, may profit from having a thermal heat storage subsystem. District heating temperatures direct the heat to power ratio of the CHP units. The use of absorption chillers driven by district heating systems are also evaluated with respect to enhancing the utilisation of district heating in periods of low heat demand. Power exchange between a thermal dominated and hydropower system is found beneficial. Use of hydropower as a substitute for peak power production in thermal dominated systems is advantageous. Return of base load from the thermal dominated system to the hydropower system can balance in the net power exchange.

  9. Fuzzy linear model for production optimization of mining systems with multiple entities

    Science.gov (United States)

    Vujic, Slobodan; Benovic, Tomo; Miljanovic, Igor; Hudej, Marjan; Milutinovic, Aleksandar; Pavlovic, Petar

    2011-12-01

    Planning and production optimization within multiple mines or several work sites (entities) mining systems by using fuzzy linear programming (LP) was studied. LP is the most commonly used operations research methods in mining engineering. After the introductory review of properties and limitations of applying LP, short reviews of the general settings of deterministic and fuzzy LP models are presented. With the purpose of comparative analysis, the application of both LP models is presented using the example of the Bauxite Basin Niksic with five mines. After the assessment, LP is an efficient mathematical modeling tool in production planning and solving many other single-criteria optimization problems of mining engineering. After the comparison of advantages and deficiencies of both deterministic and fuzzy LP models, the conclusion presents benefits of the fuzzy LP model but is also stating that seeking the optimal plan of production means to accomplish the overall analysis that will encompass the LP model approaches.

  10. PRODUCTION SYSTEM MODELING OF THE GAS LIFTED WELL BY MEANS OF THE PROGRAM PROSPER

    Directory of Open Access Journals (Sweden)

    Sonja Koščak Kolin

    2009-12-01

    Full Text Available A production system analysis was made for the well Šandrovac-136 equipped with a continuous gas lift. The analysis was based on the test data which served as the foundation for creating a production well model in computer program ‘PROSPER’ (Version 10.3, License 2681. The importance of the measured data in well modeling is accuracy and reliability in predicting future developments of the production system. The model design can be divided in six steps among which the most important are: calculation of the IPR curve, calculation of the gas lift system and matching of VLP and IPR curves based on the well testing. The aim of the VLP/IPR matching is to choose an appropriate method for calculating the pressure drop gradient by applying the nonlinear regression method, which results in the system working point adjusted to the measured data. This model was applied in sensitivity analysis of the well, in which three key variables are selected to predict their effect on future system changes, primarily on changes of the production and bottom dynamic pressure (the paper is published in Croatian.

  11. Model business intelligence system design of quality products by using data mining in R Bakery Company

    Science.gov (United States)

    Fitriana, R.; Saragih, J.; Luthfiana, N.

    2017-12-01

    R Bakery company is a company that produces bread every day. Products that produced in that company have many different types of bread. Products are made in the form of sweet bread and wheat bread which have different tastes for every types of bread. During the making process, there were defects in the products which the defective product turns into reject product. Types of defects that are produced include burnt, sodden bread and shapeless bread. To find out the information about the defects that have been produced then by applying a designed model business intelligence system to create database and data warehouse. By using model business Intelligence system, it will generate useful information such as how many defect that produced by each of the bakery products. To make it easier to obtain such information, it can be done by using data mining method which data that we get is deep explored. The method of data mining is using k-means clustering method. The results of this intelligence business model system are cluster 1 with little amount of defect, cluster 2 with medium amount of defect and cluster 3 with high amount of defect. From OLAP Cube method can be seen that the defect generated during the 7 months period of 96,744 pieces.

  12. Production models

    DEFF Research Database (Denmark)

    Svensson, Carsten

    2002-01-01

    The Project is co-financed with Nilpeter A/S and investigates the industrialization of build to order production. Project content: - Enterprise engineering - Specification processes - Mass Customization/ Build To Order - Knowledge/information management - Configuration - Supply Chain Management...

  13. What Happens to Integrated Product Development Models with Product/Service-System Approaches?

    DEFF Research Database (Denmark)

    Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

    2006-01-01

    value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...... would buy a product because it represented potential valuable benefits. Several researchers [MOR-03] have pointed to the problems of this business strategy as: 1) it links companies’ economic growth with the consumption of natural resources; 2) it delegates the responsibility of a product’s use...

  14. Towards Continuous Integration in Model-Based Engineering of Automated Production Systems

    OpenAIRE

    Jakob Mund, Iman Badr, Safa Bougouffa, Birgit Vogel-Heuser

    2017-01-01

    Continuous integration (CI) is widely used in software engineering. The observed benefits include reduced efforts for system integration, which is particularly appealing for engineering automated production systems (aPS) due to the different disciplines involved. Yet, while many individual quality assurance means for aPS have been proposed, their adequacy for and systematic use in CI remains unclear. In this article, we provide two key contributions: First, we propose a quality model for mode...

  15. Production versus environmental impact trade-offs for Swiss cropping systems: a model-based approach

    Science.gov (United States)

    Necpalova, Magdalena; Lee, Juhwan; Six, Johan

    2017-04-01

    There is a growing need to improve sustainability of agricultural systems. The key focus remains on optimizing current production systems in order to deliver food security at low environmental costs. It is therefore essential to identify and evaluate agricultural management practices for their potential to maintain or increase productivity and mitigate climate change and N pollution. Previous research on Swiss cropping systems has been concentrated on increasing crop productivity and soil fertility. Thus, relatively little is known about management effects on net soil greenhouse gas (GHG) emissions and environmental N losses in the long-term. The aim of this study was to extrapolate findings from Swiss long-term field experiments and to evaluate the system-level sustainability of a wide range of cropping systems under conditions beyond field experimentation by comparing their crop productivity and impacts on soil carbon, net soil GHG emissions, NO3 leaching and soil N balance over 30 years. The DayCent model was previously parameterized for common Swiss crops and crop-specific management practices and evaluated for productivity, soil carbon dynamics and N2O emissions from Swiss cropping systems. Based on a prediction uncertainty criterion for crop productivity and soil carbon (rRMSEstatistical analyses, the systems were grouped into the following categories: (a) farming system: organic (ORG), integrated (IN) and mineral (MIN); (b) tillage: conventional (CT), reduced (RT) and no-till (NT); (c) cover cropping: no cover cropping (NCC), winter cover cropping (CC) and winter green manuring (GM). The productivity of Swiss cropping systems was mainly driven by total N inputs to the systems. The GWP of systems ranged from -450 to 1309 kg CO2 eq ha-1 yr-1. All studied systems, except for ORG-RT-GM systems, acted as a source of net soil GHG emissions with the relative contribution of soil N2O emissions to GWP of more than 60%. The GWP of systems with CT decreased

  16. Modeling of a production system using the multi-agent approach

    Science.gov (United States)

    Gwiazda, A.; Sękala, A.; Banaś, W.

    2017-08-01

    The method that allows for the analysis of complex systems is a multi-agent simulation. The multi-agent simulation (Agent-based modeling and simulation - ABMS) is modeling of complex systems consisting of independent agents. In the case of the model of the production system agents may be manufactured pieces set apart from other types of agents like machine tools, conveyors or replacements stands. Agents are magazines and buffers. More generally speaking, the agents in the model can be single individuals, but you can also be defined as agents of collective entities. They are allowed hierarchical structures. It means that a single agent could belong to a certain class. Depending on the needs of the agent may also be a natural or physical resource. From a technical point of view, the agent is a bundle of data and rules describing its behavior in different situations. Agents can be autonomous or non-autonomous in making the decision about the types of classes of agents, class sizes and types of connections between elements of the system. Multi-agent modeling is a very flexible technique for modeling and model creating in the convention that could be adapted to any research problem analyzed from different points of views. One of the major problems associated with the organization of production is the spatial organization of the production process. Secondly, it is important to include the optimal scheduling. For this purpose use can approach multi-purposeful. In this regard, the model of the production process will refer to the design and scheduling of production space for four different elements. The program system was developed in the environment NetLogo. It was also used elements of artificial intelligence. The main agent represents the manufactured pieces that, according to previously assumed rules, generate the technological route and allow preprint the schedule of that line. Machine lines, reorientation stands, conveyors and transport devices also represent the

  17. Modeling European ruminant production systems: facing the challenges of climate change

    DEFF Research Database (Denmark)

    Kipling, Richard Philip; Bannink, Andre; Bellocchi, Gianni

    2016-01-01

    changes affect a range of economic and environmental variables at regional, national and European scales. Models at larger scales generally utilise more empirical approaches than those applied at animal, field and farm-scales and include assumptions which may not be valid under climate change conditions......Ruminant production systems are important producers of food, support rural communities and culture, and help to maintain a range of ecosystem services including the sequestering of carbon in grassland soils. However, these systems also contribute significantly to climate change through greenhouse...... gas (GHG) emissions, while intensification of production has driven biodiversity and nutrient loss, and soil degradation. Modeling can offer insights into the complexity underlying the relationships between climate change, management and policy choices, food production, and the maintenance...

  18. Evaluation of Sustainability of Brazilian Ethanol Production: A model in System Dynamics

    Directory of Open Access Journals (Sweden)

    Arnoldo Jose de Hoyos Guevara

    2017-01-01

    Full Text Available System dynamics is an approach to analyze the behavior of complex systems, such as the productive chains, strictly considering the inherent characteristics. This approach is based on mathematical concepts of nonlinear processes developed in mathematics and physics and consolidated in engineering. The concepts inherent in this approach assists in creating a mathematical model that represents a production chain by using computer simulation. Thus, the main objective of this paper is to present the formalization of the dynamic model of assessing the sustainability of Brazilian ethanol production. We analyzed the external environment and the scenarios needed for a deeper understanding of relation of cause and effect, causal loops and diagrams of flows and stocks because of the awareness stage, with regard to understanding the problems involved, according to methodology known as design science.

  19. Development of a System Model for Determining Optimal Personnel Interaction Strategy in a Production Industry

    Directory of Open Access Journals (Sweden)

    B. Kareem

    2017-03-01

    Full Text Available Manufacturing organizations have become more complex in recent time as a result of technological advances. Communication among production workers operating in an environment marked by increased organizational complexity may require planning for the economically appropriate selection of network channels/media with enhanced productivity. This paper examines traditional and modern communication channels (media and their comparative advantages over one another in their adoption in manufacturing organizations. In this framework, six media (human messengers, mobile-phones, intranet, fixed-internet, mobile-internet, and private branch exchange [PBX] phone systems were subjected to analyses using five identified network patterns (all-channel, chain, Y, wheel, and circle of interactions in manufacturing organizations. Costs, benefits, and the utility of the channels were integrated into the model and utilized to determine the most sustainable media that could enhance productivity in industry. The developed model was implemented using expert data/information collected from the plastic production industry. The results of an availability assessment showed that the enhancement of productivity could be fully achieved by utilizing mobile phones and internet networks, but when considering overall utility, only mobile phones could bring about the desired productivity with 0.59 probability. The findings suggest that the system developed is robust in revealing how productivity might be affected by means of communication among industrial workers.

  20. Development of JPSS VIIRS Global Gridded Vegetation Index products for NOAA NCEP Environmental Modeling Systems

    Science.gov (United States)

    Vargas, Marco; Miura, Tomoaki; Csiszar, Ivan; Zheng, Weizhong; Wu, Yihua; Ek, Michael

    2017-04-01

    The first Joint Polar Satellite System (JPSS) mission, the Suomi National Polar-orbiting Partnership (S-NPP) satellite, was successfully launched in October, 2011, and it will be followed by JPSS-1, slated for launch in 2017. JPSS provides operational continuity of satellite-based observations and products for NOAA's Polar Operational Environmental Satellites (POES). Vegetation products derived from satellite measurements are used for weather forecasting, land modeling, climate research, and monitoring the environment including drought, the health of ecosystems, crop monitoring and forest fires. The operationally produced S-NPP VIIRS Vegetation Index (VI) Environmental Data Record (EDR) includes two vegetation indices: the Top of the Atmosphere (TOA) Normalized Difference Vegetation Index (NDVI), and the Top of the Canopy (TOC) Enhanced Vegetation Index (EVI). For JPSS-1, the S-NPP Vegetation Index EDR algorithm has been updated to include the TOC NDV. The current JPSS operational VI products are generated in granule style at 375 meter resolution at nadir, but these products in granule format cannot be ingested into NOAA operational monitoring and decision making systems. For that reason, the NOAA JPSS Land Team is developing a new global gridded Vegetation Index (VI) product suite for operational use by the NOAA National Centers for Environmental Prediction (NCEP). The new global gridded VIs will be used in the Multi-Physics (MP) version of the Noah land surface model (Noah-MP) in NCEP NOAA Environmental Modeling System (NEMS) for plant growth and data assimilation and to describe vegetation coverage and density in order to model the correct surface energy partition. The new VI 4km resolution global gridded products (TOA NDVI, TOC NDVI and TOC EVI) are being designed to meet the needs of directly ingesting vegetation index variables without the need to develop local gridding and compositing procedures. These VI products will be consistent with the already

  1. MODEL BASED BIOMASS SYSTEM DESIGN OF FEEDSTOCK SUPPLY SYSTEMS FOR BIOENERGY PRODUCTION

    Energy Technology Data Exchange (ETDEWEB)

    David J. Muth, Jr.; Jacob J. Jacobson; Kenneth M. Bryden

    2013-08-01

    Engineering feedstock supply systems that deliver affordable, high-quality biomass remains a challenge for the emerging bioenergy industry. Cellulosic biomass is geographically distributed and has diverse physical and chemical properties. Because of this feedstock supply systems that deliver cellulosic biomass resources to biorefineries require integration of a broad set of engineered unit operations. These unit operations include harvest and collection, storage, preprocessing, and transportation processes. Design decisions for each feedstock supply system unit operation impact the engineering design and performance of the other system elements. These interdependencies are further complicated by spatial and temporal variances such as climate conditions and biomass characteristics. This paper develops an integrated model that couples a SQL-based data management engine and systems dynamics models to design and evaluate biomass feedstock supply systems. The integrated model, called the Biomass Logistics Model (BLM), includes a suite of databases that provide 1) engineering performance data for hundreds of equipment systems, 2) spatially explicit labor cost datasets, and 3) local tax and regulation data. The BLM analytic engine is built in the systems dynamics software package PowersimTM. The BLM is designed to work with thermochemical and biochemical based biofuel conversion platforms and accommodates a range of cellulosic biomass types (i.e., herbaceous residues, short- rotation woody and herbaceous energy crops, woody residues, algae, etc.). The BLM simulates the flow of biomass through the entire supply chain, tracking changes in feedstock characteristics (i.e., moisture content, dry matter, ash content, and dry bulk density) as influenced by the various operations in the supply chain. By accounting for all of the equipment that comes into contact with biomass from the point of harvest to the throat of the conversion facility and the change in characteristics, the

  2. Adapting Agricultural Production Systems to Climate Change—What’s the Use of Models?

    Directory of Open Access Journals (Sweden)

    Annelie Holzkämper

    2017-10-01

    Full Text Available Climate change poses a challenge to agricultural production and its impacts vary depending on regional focus and on the type of production system. To avoid production losses and make use of emerging potentials, adaptations in agricultural management will inevitably be required. Adaptation responses can broadly be distinguished into (1 short-term incremental responses that farmers often choose autonomously in response to observed changes and based on local knowledge and experiences, and (2 long-term transformative responses that require strategic planning, and which are usually implemented at a larger spatial scale. Models can be used to support decision making at both response levels; thereby, different features of models prove more or less valuable depending on the type of adaptation response. This paper presents a systematic literature review on the state-of-the-art in modelling for adaptation planning in agricultural production systems, investigating the question of which model types can be distinguished and how these types differ in the way they support decision making in agricultural adaptation planning. Five types of models are distinguished: (1 empirical crop models; (2 regional suitability models; (3 biophysical models; (4 meta-models; and (5 decision models. The potential and limitations of these model types for providing decision-support to short- and long-term adaptation planning are discussed. The risk of maladaptation—adaptation that implies negative consequences either in the long term or in a wider context—is identified as a key challenge of adaptation planning that needs more attention. Maladaptation is not only a risk of decision making in the face of incomplete knowledge of future climate impacts on the agricultural production system; but it can also be a threat if the connectedness of the agroecosystem is not sufficiently acknowledged when management adaptations are implemented. Future research supporting climate change

  3. Prediction of Pig Trade Movements in Different European Production Systems Using Exponential Random Graph Models.

    Science.gov (United States)

    Relun, Anne; Grosbois, Vladimir; Alexandrov, Tsviatko; Sánchez-Vizcaíno, Jose M; Waret-Szkuta, Agnes; Molia, Sophie; Etter, Eric Marcel Charles; Martínez-López, Beatriz

    2017-01-01

    In most European countries, data regarding movements of live animals are routinely collected and can greatly aid predictive epidemic modeling. However, the use of complete movements' dataset to conduct policy-relevant predictions has been so far limited by the massive amount of data that have to be processed (e.g., in intensive commercial systems) or the restricted availability of timely and updated records on animal movements (e.g., in areas where small-scale or extensive production is predominant). The aim of this study was to use exponential random graph models (ERGMs) to reproduce, understand, and predict pig trade networks in different European production systems. Three trade networks were built by aggregating movements of pig batches among premises (farms and trade operators) over 2011 in Bulgaria, Extremadura (Spain), and Côtes-d'Armor (France), where small-scale, extensive, and intensive pig production are predominant, respectively. Three ERGMs were fitted to each network with various demographic and geographic attributes of the nodes as well as six internal network configurations. Several statistical and graphical diagnostic methods were applied to assess the goodness of fit of the models. For all systems, both exogenous (attribute-based) and endogenous (network-based) processes appeared to govern the structure of pig trade network, and neither alone were capable of capturing all aspects of the network structure. Geographic mixing patterns strongly structured pig trade organization in the small-scale production system, whereas belonging to the same company or keeping pigs in the same housing system appeared to be key drivers of pig trade, in intensive and extensive production systems, respectively. Heterogeneous mixing between types of production also explained a part of network structure, whichever production system considered. Limited information is thus needed to capture most of the global structure of pig trade networks. Such findings will be useful

  4. Production of Modularised Product Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter

    2004-01-01

    but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...

  5. Model based fleet optimisation and master control of a power production system

    International Nuclear Information System (INIS)

    Joergensen, C.; Mortensen, J.H.; Nielsen, E.O.; Moelbak, T.

    2006-01-01

    This paper discussed an optimization concept for power plants operated by the Danish power company Elsam. The power company operates a distributed power production system with fossil fuel thermal plants, biomass-fired thermal plants, waste incineration plants, on- and offshore wind power, and district heating storage units. Power and regulation power are traded on an hourly basis, while trading of district heating resources is conducted using bilateral contracts. System and plant level case studies on optimization and control were presented. A system control level was developed to ensure compliance with power market requirements. Dynamic constraints were posed by environmental regulations, grid capabilities, and fuel and district heating contracts. System components included a short-term load scheduler; a power controller; a frequency control scheduler; a marginal cost calculator; and a master control. The scheduler consisted of an optimization algorithm and a set of steady-state models designed to minimize fuel, load, and maintenance costs. Quadratic programming and mixed integer programming methods were used to minimize deviations between the total electrical power production reference value and actual power production values. The study showed that control levels can be optimized using advanced modelling and control methods. However, integration and coordination between the various levels is needed to obtain improved performance. It was concluded that a bottom-up approach starting at the lowest possible level can ensure the performance of an optimization scheme. 6 refs., 9 figs

  6. A system simulation model applied to the production schedule of a fish processing facility

    Directory of Open Access Journals (Sweden)

    Carla Roberta Pereira

    2012-11-01

    Full Text Available The simulation seeks to import the reality to a controlled environment, where it is possible to study it behavior, under several conditions, without involving physical risks and/or high costs. Thus, the system simulation becomes a useful and powerful technique in emergence markets, as the tilapiculture sector that needs to expand its business. The main purpose of this study was the development of a simulation model to assist the decisions making of the production scheduling of a fish processing facility. It was applied, as research method, the case study and the modeling/simulation, including in this set the SimuCAD methodology and the development phases of a simulation model. The model works with several alternative scenarios, testing different working shifts, types of flows and production capacity, besides variations of the ending inventory and sales. The result of this research was a useful and differentiated model simulation to assist the decision making of the production scheduling of fish processing facility studied.

  7. Towards a new generation of agricultural system data, models and knowledge products: Information and communication technology.

    Science.gov (United States)

    Janssen, Sander J C; Porter, Cheryl H; Moore, Andrew D; Athanasiadis, Ioannis N; Foster, Ian; Jones, James W; Antle, John M

    2017-07-01

    Agricultural modeling has long suffered from fragmentation in model implementation. Many models are developed, there is much redundancy, models are often poorly coupled, model component re-use is rare, and it is frequently difficult to apply models to generate real solutions for the agricultural sector. To improve this situation, we argue that an open, self-sustained, and committed community is required to co-develop agricultural models and associated data and tools as a common resource. Such a community can benefit from recent developments in information and communications technology (ICT). We examine how such developments can be leveraged to design and implement the next generation of data, models, and decision support tools for agricultural production systems. Our objective is to assess relevant technologies for their maturity, expected development, and potential to benefit the agricultural modeling community. The technologies considered encompass methods for collaborative development and for involving stakeholders and users in development in a transdisciplinary manner. Our qualitative evaluation suggests that as an overall research challenge, the interoperability of data sources, modular granular open models, reference data sets for applications and specific user requirements analysis methodologies need to be addressed to allow agricultural modeling to enter in the big data era. This will enable much higher analytical capacities and the integrated use of new data sources. Overall agricultural systems modeling needs to rapidly adopt and absorb state-of-the-art data and ICT technologies with a focus on the needs of beneficiaries and on facilitating those who develop applications of their models. This adoption requires the widespread uptake of a set of best practices as standard operating procedures.

  8. A Model-Based Systems Engineering Methodology for Employing Architecture In System Analysis: Developing Simulation Models Using Systems Modeling Language Products to Link Architecture and Analysis

    Science.gov (United States)

    2016-06-01

    Filling Designs for Complex System Simulations.” Ph.D. Dissertation, Naval Postgraduate School. MacCalman, Alex, Hyangshim Kwak, Mary McDonald, and...Michael, Peter Bryant, Mike Wilkinson, Paul King, Ady James, and Stuart Arnold. 2012. “Interpreting ‘Systems Architecting.’” Systems Engineering 15(4...Hyangshim Kwak, Mary McDonald, and Stephen Upton. 2015. “Capturing experimental design insights in support of the model-based systems engineering approach

  9. Model for Environmental Assessment of Industrial Production Systems: A Case Study in a Plastic Manufacturing Firm

    Directory of Open Access Journals (Sweden)

    Francine Comunello

    2017-05-01

    Full Text Available The environmental issue has been discussed sharply in the organizational environment, as consumers, and society in general, have been increasingly concerned about the environment. In this sense, the companies, especially the factories, seek to minimize the environmental impact caused by its production processes through actions that combine the organization's economic interests with environmental concerns. Thus, this article aims to analyze how environmental management of the productive sector is being carried out at Industria Beta Chapecó/SC. Therefore, we developed a qualitative and descriptive research in order to apply the Model for Environmental Assessment of Industrial Production Systems (MAASPI in the production of Industria Beta sector. The results showed the main environmental interventions caused by the production process of the organization, particularly the interventions for the consumption of electricity, plant location and chip storage. As main proposals to minimize negative environmental impacts, we have the installation of translucent tiles in the production environment, a study on energy efficiency, construction of water and soil testing, construction of waste storage terminals and implementation of the pre-selection of the raw material. The realization of the suggested adjustments enables Industria Beta to foresee the legal environmental requirements, to aim for enviromental certifications and seals and to strengthen its image as environment-friendly with collaborators and society in general.

  10. A QFD-Based Evaluation Method for Business Models of Product Service Systems

    Directory of Open Access Journals (Sweden)

    Tianyang Li

    2016-01-01

    Full Text Available Organizations have been approaching Product Service Systems (PSS in unoptimized business model fashions. This is partially because there is ineffective evaluation of PSS business models. Therefore, a more sufficient evaluation method might advance the evaluation of PSS business models and assist organizations that are considering a servitisation strategy. In this paper, we develop a value oriented method by using the Quality Function Deployment (QFD technique to employ correlations derived from the design information of PSS business models to evaluate these PSS business models. We describe the method applying steps and its practical application in a real life case study. This method improves the formulation of an evaluation step within a design process of PSS business models based on correlations of different dimensions of the PSS value and PSS business models; it allows a balance between the customer value and organization value that are delivered by PSS business models to be made quantitatively. Finally, it fosters the effective utilization of the design information accumulated in the earlier part of the design process to quantitatively evaluate whether a PSS business model is optimized for providing appropriate values for customers and organizations.

  11. Innovation Production Models

    Directory of Open Access Journals (Sweden)

    Tamam N. Guseinova

    2016-01-01

    Full Text Available The article is dedicated to the study of the models of production of innovations at enterprise and state levels. The shift towards a new technology wave induces a change in systems of division of labour as well as establishment of new forms of cooperation that are reflected both in theory and practice of innovation policy and management. Within the scope of the research question we have studied different generation of innovation process, starting with simple linear models - "technology push" and "market pull" - and ending with a complex integrated model of open innovations. There are two organizational models of innovation production at the enterprise level: start-ups in the early stages of their development and ambidextrous organizations. The former are prone to linear models of innovation process, while the latter create innovation within more sophisticated inclusive processes. Companies that effectuate reciprocal ambidexterity stand out from all the rest, since together with start-ups, research and development centres, elements of innovation infrastructure and other economic agents operating in the same value chain they constitute the core of most advanced forms of national innovation systems, namely Triple Helix and Quadruple Helix systems. National innovation systems - models of innovation production at the state level - evolve into systems with a more profound division of labour that enable "line production" of innovations. These tendencies are closely related to the advent and development of the concept of serial entrepreneurship that transforms entrepreneurship into a new type of profession. International experience proves this concept to be efficient in various parts of the world. Nevertheless, the use of above mentioned models and concepts in national innovation system should be justified by socioeconomic conditions of economic regions, since they determine the efficiency of implementation of certain innovation processes and

  12. Root production method system

    Science.gov (United States)

    Wayne Lovelace

    2002-01-01

    The RPM system (Root Production Method) is a multistep production system of container tree production that places primary emphasis on the root system because the root system ultimately determines the tree's survival and performance in its outplanted environment. This particular container production system has been developed to facilitate volume production, in a...

  13. Modeling and analysing storage systems in agricultural biomass supply chain for cellulosic ethanol production

    International Nuclear Information System (INIS)

    Ebadian, Mahmood; Sowlati, Taraneh; Sokhansanj, Shahab; Townley-Smith, Lawrence; Stumborg, Mark

    2013-01-01

    Highlights: ► Studied the agricultural biomass supply chain for cellulosic ethanol production. ► Evaluated the impact of storage systems on different supply chain actors. ► Developed a combined simulation/optimization model to evaluate storage systems. ► Compared two satellite storage systems with roadside storage in terms of costs and emitted CO 2 . ► SS would lead to a more cost-efficient supply chain compared to roadside storage. -- Abstract: In this paper, a combined simulation/optimization model is developed to better understand and evaluate the impact of the storage systems on the costs incurred by each actor in the agricultural biomass supply chain including farmers, hauling contractors and the cellulosic ethanol plant. The optimization model prescribes the optimum number and location of farms and storages. It also determines the supply radius, the number of farms required to secure the annual supply of biomass and also the assignment of farms to storage locations. Given the specific design of the supply chain determined by the optimization model, the simulation model determines the number of required machines for each operation, their daily working schedule and utilization rates, along with the capacities of storages. To evaluate the impact of the storage systems on the delivered costs, three storage systems are molded and compared: roadside storage (RS) system and two satellite storage (SS) systems including SS with fixed hauling distance (SF) and SS with variable hauling distance (SV). In all storage systems, it is assumed the loading equipment is dedicated to storage locations. The obtained results from a real case study provide detailed cost figures for each storage system since the developed model analyses the supply chain on an hourly basis and considers time-dependence and stochasticity of the supply chain. Comparison of the storage systems shows SV would outperform SF and RS by reducing the total delivered cost by 8% and 6%, respectively

  14. Development of an Innovation Model Based on a Service-Oriented Product Service System (PSS

    Directory of Open Access Journals (Sweden)

    Seungkyum Kim

    2015-10-01

    Full Text Available Recently, there have been many attempts to cope with increasingly-diversified and ever-changing customer needs by combining products and services that are critical components of innovation models. Although not only manufacturers, but also service providers, try to integrate products and services, most of the previous studies on Product Service System (PSS development deal with how to effectively integrate services into products from the product-centric point of view. Services provided by manufacturers’ PSSes, such as delivery services, training services, disposal services, and so on, offer customers ancillary value, whereas products of service providers’ PSSes enrich core value by enhancing the functionality and quality of the service. Thus, designing an effective PSS development process from the service-centric point of view is an important research topic. Accordingly, the purpose of this paper is to propose a service-oriented PSS development process, which consists of four stages: (1 strategic planning; (2 idea generation and selection; (3 service design; and (4 product development. In the proposed approach, the PSS development project is initiated and led by a service provider from a service-centric point of view. From the perspective of methodology, customer needs are converted into product functions according to Quality Function Deployment (QFD, while Analytic Hierarchy Process (AHP is employed to prioritize the functions. Additionally, this paper illustrates a service-oriented PSS development that demonstrates the application of the proposed process. The proposed process and illustration are expected to serve as a foundation for research on service-oriented PSS development and as a useful guideline for service providers who are considering the development of a service-oriented PSS.

  15. A model-based systems approach to pharmaceutical product-process design and analysis

    DEFF Research Database (Denmark)

    Gernaey, Krist; Gani, Rafiqul

    2010-01-01

    This is a perspective paper highlighting the need for systematic model-based design and analysis in pharmaceutical product-process development. A model-based framework is presented and the role, development and use of models of various types are discussed together with the structure of the models...... for the product and the process. The need for a systematic modelling framework is highlighted together with modelling issues related to model identification, adaptation and extension. In the area of product design and analysis, predictive models are needed with a wide application range. In the area of process...... synthesis and design, the use of generic process models from which specific process models can be generated, is highlighted. The use of a multi-scale modelling approach to extend the application range of the property models is highlighted as well. Examples of different types of process models, model...

  16. Development of Energy Models for Production Systems and Processes to Inform Environmentally Benign Decision-Making

    Science.gov (United States)

    Diaz-Elsayed, Nancy

    Between 2008 and 2035 global energy demand is expected to grow by 53%. While most industry-level analyses of manufacturing in the United States (U.S.) have traditionally focused on high energy consumers such as the petroleum, chemical, paper, primary metal, and food sectors, the remaining sectors account for the majority of establishments in the U.S. Specifically, of the establishments participating in the Energy Information Administration's Manufacturing Energy Consumption Survey in 2006, the non-energy intensive" sectors still consumed 4*109 GJ of energy, i.e., one-quarter of the energy consumed by the manufacturing sectors, which is enough to power 98 million homes for a year. The increasing use of renewable energy sources and the introduction of energy-efficient technologies in manufacturing operations support the advancement towards a cleaner future, but having a good understanding of how the systems and processes function can reduce the environmental burden even further. To facilitate this, methods are developed to model the energy of manufacturing across three hierarchical levels: production equipment, factory operations, and industry; these methods are used to accurately assess the current state and provide effective recommendations to further reduce energy consumption. First, the energy consumption of production equipment is characterized to provide machine operators and product designers with viable methods to estimate the environmental impact of the manufacturing phase of a product. The energy model of production equipment is tested and found to have an average accuracy of 97% for a product requiring machining with a variable material removal rate profile. However, changing the use of production equipment alone will not result in an optimal solution since machines are part of a larger system. Which machines to use, how to schedule production runs while accounting for idle time, the design of the factory layout to facilitate production, and even the

  17. Production planning and control for semiconductor wafer fabrication facilities modeling, analysis, and systems

    CERN Document Server

    Mönch, Lars; Mason, Scott J

    2012-01-01

    Over the last fifty-plus years, the increased complexity and speed of integrated circuits have radically changed our world. Today, semiconductor manufacturing is perhaps the most important segment of the global manufacturing sector. As the semiconductor industry has become more competitive, improving planning and control has become a key factor for business success. This book is devoted to production planning and control problems in semiconductor wafer fabrication facilities. It is the first book that takes a comprehensive look at the role of modeling, analysis, and related information systems

  18. A spatial model for the economic evaluation of biomass production systems

    International Nuclear Information System (INIS)

    Wei Liu; Phillips, V.D.; Singh, Devindar

    1992-01-01

    A system model for estimating short-rotation, intensive-culture woody biomass production costs, including establishment, maintenance, harvesting, and transport costs, was developed and applied to the island of Kauai. Using data from existing large-plot field trials, biomass yield of the tropical hardwood Eucalyptus saligna was predicted from site-specific factors such as local weather and soil conditions and management strategies. Possible harvesting systems were identified and associated harvesting costs were estimated. The distances from the plantation sites to a bio-conversion plant located at the Lihue sugar mill were calculated based on existing road networks. The delivered cost of biomass on a dollar per dry metric ton (Mg) basis was then calculated using a discounted cash flow method. A geographic information system was interfaced with the biomass system model to access a database and present results in map form. Under the most favorable management strategy modeled, approximately 330 x 10 3 dry Mg year -1 of Eucalyptus saligna could be produced from 12,000 ha at a delivered cost of $25-38 per dry Mg chips. (author)

  19. The feasibility assessment of a U.S. natural gas production reporting system uniform production reporting model. Final report, July 1993--June 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-01

    The Uniform Production Reporting Model (UPRM) project was charged with identifying the best practices and procedures of the natural gas producing states related to the gathering, management, and dissemination of production data. It is recommended that the producing states begin the process of upgrading state systems using the concepts embodied in the UPRM model.

  20. What controls biological production in coastal upwelling systems? Insights from a comparative modeling study

    Directory of Open Access Journals (Sweden)

    Z. Lachkar

    2011-10-01

    Full Text Available The magnitude of net primary production (NPP in Eastern Boundary Upwelling Systems (EBUS is traditionally viewed as directly reflecting the wind-driven upwelling intensity. Yet, different EBUS show different sensitivities of NPP to upwelling-favorable winds (Carr and Kearns, 2003. Here, using a comparative modeling study of the California Current System (California CS and Canary Current System (Canary CS, we show how physical and environmental factors, such as light, temperature and cross-shore circulation modulate the response of NPP to upwelling strength. To this end, we made a series of eddy-resolving simulations of the two upwelling systems using the Regional Oceanic Modeling System (ROMS, coupled to a nitrogen-based Nutrient-Phytoplankton-Zooplankton-Detritus (NPZD ecosystem model. Using identical ecological/biogeochemical parameters, our coupled model simulates a level of NPP in the California CS that is 50 % smaller than that in the Canary CS, in agreement with observationally based estimates. We find this much lower NPP in the California CS despite phytoplankton in this system having nearly 20 % higher nutrient concentrations available to fuel their growth. This conundrum can be explained by: (1 phytoplankton having a faster nutrient-replete growth in the Canary CS relative to the California CS; a consequence of more favorable light and temperature conditions in the Canary CS, and (2 the longer nearshore water residence times in the Canary CS, which permit a larger buildup of biomass in the upwelling zone, thereby enhancing NPP. The longer residence times in the Canary CS appear to be a result of the wider continental shelves and the lower mesoscale activity characterizing this upwelling system. This results in a weaker offshore export of nutrients and organic matter, thereby increasing local nutrient recycling and reducing the spatial decoupling between new and export production in the Canary CS. Our results suggest that climate change

  1. PermVeg: A model to design crop sequences for permanent vegetable production systems in the Red River Delta, Vietnam

    NARCIS (Netherlands)

    Pham Thi Thu Huong, Huong; Everaarts, A.P.; Berg, van den W.; Neeteson, J.J.; Struik, P.C.

    2014-01-01

    The constraints in current vegetable production systems in the Red River Delta, Vietnam, in which vegetables are rotated with flooded rice, called for the design of alternative systems of permanent vegetable production. The practical model, PermVeg, was developed to generate vegetable crop sequences

  2. Expanding the Role of Systems Modeling: Considering Byproduct Generation from Biofuel Production

    Directory of Open Access Journals (Sweden)

    Kurt A. Rosentrater

    2006-06-01

    Full Text Available The bioethanol industry has been experiencing rapid growth over the past several years, and is expected to continue to increase production for the foreseeable future. A vital component to the success of this industry is the sales and marketing of processing residues, which are primarily sold as dried distillers grains with solubles (DDGS. Systems modeling, a technique that has been used to predict future demand for bioethanol, can also be used to determine potential byproduct generation rates. This paper discusses the development of one such model, and presents predicted generation of DDGS as well as carbon dioxide emissions from this industry through 2100. These simulation results underscore the growing need to actively pursue research focused on value-added alternatives for the use of bioethanol byproduct streams.

  3. Quantitative modelling to estimate the transfer of pharmaceuticals through the food production system

    NARCIS (Netherlands)

    Chitescu, C.L.; Nicolau, A.I.; Romkens, P.F.A.M.; Fels-Klerx, van der H.J.

    2014-01-01

    Use of pharmaceuticals in animal production may cause an indirect route of contamination of food products of animal origin. This study aimed to assess, through mathematical modelling, the transfer of pharmaceuticals from contaminated soil, through plant uptake, into the dairy food production chain.

  4. Statistical Analysis and ETAS Modeling of Seismicity Induced by Production of Geothermal Energy from Hydrothermal Systems

    Science.gov (United States)

    Dinske, C.; Langenbruch, C.; Shapiro, S. A.

    2017-12-01

    We investigate seismicity related to hydrothermal systems in Germany and Italy, focussing on temporal changes of seismicity rates. Our analysis was motivated by numerical simulations The modeling of stress changes caused by the injection and production of fluid revealed that seismicity rates decrease on a long-term perspective which is not observed in the considered case studies. We analyze the waiting time distributions of the seismic events in both time domain (inter event times) and fluid volume domain (inter event volume). We find clear indications that the observed seismicity comprises two components: (1) seismicity that is directly triggered by production and re-injection of fluid, i.e. induced events, and (2) seismicity that is triggered by earthquake interactions, i.e. aftershock triggering. In order to better constrain our numerical simulations using the observed induced seismicity we apply catalog declustering to seperate the two components. We use the magnitude-dependent space-time windowing approach introduced by Gardner and Knopoff (1974) and test several published algorithms to calculate the space-time windows. After declustering, we conclude that the different hydrothermal reservoirs show a comparable seismic response to the circulation of fluid and additional triggering by earthquake interactions. The declustered catalogs contain approximately 50 per cent of the number of events in the original catalogs. We then perform ETAS (Epidemic Type Aftershock; Ogata, 1986, 1988) modeling for two reasons. First, we want to know whether the different reservoirs are also comparable regarding earthquake interaction patterns. Second, if we identify systematic patterns, ETAS modeling can contribute to forecast seismicity during production of geothermal energy. We find that stationary ETAS models cannot accurately capture real seismicity rate changes. One reason for this finding is given by the rate of observed induced events which is not constant over time. Hence

  5. Computer modelling of the influences of a subsystems’ interaction on energetic efficiency of biofuel production systems

    Directory of Open Access Journals (Sweden)

    Wasiak Andrzej

    2017-01-01

    Full Text Available Energetic efficiency of biofuel production systems, as well as that of other fuels production systems, can be evaluated on the basis of modified EROEI indicator. In earlier papers, a new definition of the EROEI indicator was introduced. This approach enables the determination of this indicator separately for individual subsystems of a chosen production system, and therefore enables the studies of the influence of every subsystem on the energetic efficiency of the system as a whole. The method has been applied to the analysis of interactions between agricultural, internal transport subsystems, as well as preliminary studies of the effect of industrial subsystem.

  6. Automatic generation of computer models through the integration of production systems design software tools

    OpenAIRE

    Dias, Luís M. S.; Vik, Pavel; Pereira, Guilherme; Oliveira, José A.

    2010-01-01

    The design of production and logistic systems is a process of managing both technical and organizational variants in order to identify the best solution for a given system. This is a very well-known industrial engineering issue, where the objectives for designing such a system have been changing over the last decades. Former approaches were concerned about material handling costs only but more recent works include re-layout and product mix costs, together with a great concern on processes – h...

  7. Modeling ecological synergies and trade-offs in livestock production systems in Kenya

    Science.gov (United States)

    Kowal, V. A.; Chaplin-Kramer, R.; Hamel, P.

    2016-12-01

    Livestock production is critical to maintaining livelihoods in many of the world's rural economies, and interacts with complex ecological processes in ways that present both opportunities and risks for ecosystems and the benefits they provide to people. We present a new dynamic simulation model to examine cattle production in the savannas of East Africa, and its synergies and trade-offs with co-benefits such as wildlife conservation and related tourism. The InVEST rangeland production model couples biomass production from the CENTURY model with diet selection and herbivore physiology from the GRAZPLAN animal biology model. This powerful and flexible model demonstrates that through their interactions mediated by forage availability and tick-borne disease, cattle and wildlife may benefit from integration.

  8. Fate of Staphylococcus aureus in radiation sterilized model food systems simulating dairy products

    International Nuclear Information System (INIS)

    Sulebele, G.A.; Kamat, M.Y.

    1976-01-01

    Gamma irradiation was successfully employed for the development of sterile model food systems simulating dairy products such as pedha and cottage cheese which were inoculated with enterotoxigenic S.aureus S-6 and FR1-100 either individually or in association with S.epidermids and other mixed flora comprising of gram-positive, gram-negative and lactic bacteria and stored at 4 and 35 degC for 6-8 weeks. Pedha failed to support growth of S.aureus while cottage cheese favoured profuse growth of the pathogen. S.epidermidis exhibited a synergistic effect on the growth of S.aureus in cottage cheese. Baired-Parker's medium showed very poor recovery of S.aureus which necessitated the development of a new selective medium for the enumeration of staphylococci in processed foods. (author)

  9. APEX user`s guide - (Argonne production, expansion, and exchange model for electrical systems), version 3.0

    Energy Technology Data Exchange (ETDEWEB)

    VanKuiken, J.C.; Veselka, T.D.; Guziel, K.A.; Blodgett, D.W.; Hamilton, S.; Kavicky, J.A.; Koritarov, V.S.; North, M.J.; Novickas, A.A.; Paprockas, K.R. [and others

    1994-11-01

    This report describes operating procedures and background documentation for the Argonne Production, Expansion, and Exchange Model for Electrical Systems (APEX). This modeling system was developed to provide the U.S. Department of Energy, Division of Fossil Energy, Office of Coal and Electricity with in-house capabilities for addressing policy options that affect electrical utilities. To meet this objective, Argonne National Laboratory developed a menu-driven programming package that enables the user to develop and conduct simulations of production costs, system reliability, spot market network flows, and optimal system capacity expansion. The APEX system consists of three basic simulation components, supported by various databases and data management software. The components include (1) the investigation of Costs and Reliability in Utility Systems (ICARUS) model, (2) the Spot Market Network (SMN) model, and (3) the Production and Capacity Expansion (PACE) model. The ICARUS model provides generating-unit-level production-cost and reliability simulations with explicit recognition of planned and unplanned outages. The SMN model addresses optimal network flows with recognition of marginal costs, wheeling charges, and transmission constraints. The PACE model determines long-term (e.g., longer than 10 years) capacity expansion schedules on the basis of candidate expansion technologies and load growth estimates. In addition, the Automated Data Assembly Package (ADAP) and case management features simplify user-input requirements. The ADAP, ICARUS, and SMN modules are described in detail. The PACE module is expected to be addressed in a future publication.

  10. Forecast model for a water table control system in cranberry production

    Science.gov (United States)

    Racine, Cintia; José Gumiere, Silvio; Paniconi, Claudio; Dupuis, Christian; Lafond, Jonathan; Scudeler, Carlotta; Camporese, Matteo

    2017-04-01

    Water table control is gaining popularity in cranberry production. Cranberry plants require specific soil moisture conditions to enhance crop yields. In fact, water table control systems installed in the fields allow the plants to respond efficiently to the daily demand for evapotranspiration by capillarity rise and also regulate the soil water excess in drainage conditions. The scope of this study is to develop a forecast hydrological model at the field scale, able to simulate water level for water table control operations. In this work, the finite element CATHY (CATchment Hydrology) model associated with sequential data assimilation with an ensemble Kalman filter (EnKF) method will be used to simulated the soil water dynamics and perform model calibration in real-time. The study is conducted in cranberry fields located in Québec, Canada. During the last five years, these fields were extensive characterized regarding hydrological, pedological, and geological processes. Data collected from LIDAR and Ground Penetrating Radar (GPR) surveys and in-situ soil sampling have been used to define the domain geometry and initial soil properties. First results are promising and in agreement the in-situ water table measurements.

  11. An integrated prediction and optimization model of biogas production system at a wastewater treatment facility.

    Science.gov (United States)

    Akbaş, Halil; Bilgen, Bilge; Turhan, Aykut Melih

    2015-11-01

    This study proposes an integrated prediction and optimization model by using multi-layer perceptron neural network and particle swarm optimization techniques. Three different objective functions are formulated. The first one is the maximization of methane percentage with single output. The second one is the maximization of biogas production with single output. The last one is the maximization of biogas quality and biogas production with two outputs. Methane percentage, carbon dioxide percentage, and other contents' percentage are used as the biogas quality criteria. Based on the formulated models and data from a wastewater treatment facility, optimal values of input variables and their corresponding maximum output values are found out for each model. It is expected that the application of the integrated prediction and optimization models increases the biogas production and biogas quality, and contributes to the quantity of electricity production at the wastewater treatment facility. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Product Configuration Systems and Productivity

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard; Edwards, Kasper

    2004-01-01

    Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

  13. Lean production in improving supply chain performance through hybrid model SCOR 11.0 - system dynamics

    Science.gov (United States)

    Saleh, Chairul; Fatcha Mubiena, Ghaida; Immawan, Taufiq; Hassan, Azmi

    2016-02-01

    Supply Chain Operation Reference (SCOR) is a method to measure supply chain serving the business process framework, performance indicators and unique technologies to support communication and collaboration among supply chain partners. The objective of this paper is to measure Supply Chain Management performance by using SCOR version 11.0 for production typology of MTS-MTO in Indonesian Batik Industry. This research combines SCOR's model and System Dynamics in order to predict the complex activities on batik industry. The hybrid SCOR-SD could identify the interaction among five attributes with the associated variables simultaneously. The results are obtained after the performance of lean production application is increased and the targets are achieved, even exceeding the target. For reliability attributes that associated with perfect order fulfilment started from 2015 to 2019 respectively are calculated as 80.06%, 103.53%, 105.58%, 93.76%, and 72.17%. Responsiveness attributes associated with the order fulfilment cycle time, respectively 122.45%, 149.10%, 159.26%, 131.53%, and 119.36%. Attributes associated with the total cost of service charge respectively 93.46%, 93.53%, 93.45%, 93.49, and 93.49%. Attributes associated with cash management assets to cash cycle time in a row were 160%, 153%, 146.3%, 150%, and 126.7%. The latter attribute is agility attributes associated with supply chain flexibility upside respectively 100%, 87.2%, 100%, 82%, and 82%.

  14. Security Viewpoint in a Reference Architecture Model for Cyber-Physical Production Systems

    OpenAIRE

    Ma, Zhendong; Hudic, Aleksandar; Shaaban, Abdelkader; Plosz, Sandor

    2017-01-01

    Cyber-physical Production Systems (CPPS) are one of the technical driving forces behind the transformation of industrial production towards "digital factory of the future" in the context of Industry 4.0. Security is a major concern for such systems as they become more intelligent, interconnected, and coupled with physical devices. For various security activities from security analysis to designing security controls and architecture, a systematic and structured view and presentation of securit...

  15. Innovation in Integrated Chemical Product-Process Design - Development through a Model-based Systems Approach

    DEFF Research Database (Denmark)

    Conte, Elisa

    in which experiments are planned and a third stage in which experiments are performed to validate the final product formula. The main focus of the project is on the development of the computer-aided stage of the methodology described above. The methodology considers two different scenarios: the design...... appropriate model-based screening techniques are employed. In the verification scenario, a shortlist of candidate ingredients is provided, therefore the problem size is much smaller and rigorous property models can be employed/developed. When using computer-aided tools for product design, several issues need...... to be addressed: new property models may need to be developed and/or the application range of existing property models may need to be extended (that is, new model parameters are needed), new and more efficient methods and tools for the application of the models may need to be developed, together with a flexible...

  16. Looking Past Primary Productivity: Benchmarking System Processes that Drive Ecosystem Level Responses in Models

    Science.gov (United States)

    Cowdery, E.; Dietze, M.

    2017-12-01

    As atmospheric levels of carbon dioxide levels continue to increase, it is critical that terrestrial ecosystem models can accurately predict ecological responses to the changing environment. Current predictions of net primary productivity (NPP) in response to elevated atmospheric CO2 concentration are highly variable and contain a considerable amount of uncertainty. Benchmarking model predictions against data are necessary to assess their ability to replicate observed patterns, but also to identify and evaluate the assumptions causing inter-model differences. We have implemented a novel benchmarking workflow as part of the Predictive Ecosystem Analyzer (PEcAn) that is automated, repeatable, and generalized to incorporate different sites and ecological models. Building on the recent Free-Air CO2 Enrichment Model Data Synthesis (FACE-MDS) project, we used observational data from the FACE experiments to test this flexible, extensible benchmarking approach aimed at providing repeatable tests of model process representation that can be performed quickly and frequently. Model performance assessments are often limited to traditional residual error analysis; however, this can result in a loss of critical information. Models that fail tests of relative measures of fit may still perform well under measures of absolute fit and mathematical similarity. This implies that models that are discounted as poor predictors of ecological productivity may still be capturing important patterns. Conversely, models that have been found to be good predictors of productivity may be hiding error in their sub-process that result in the right answers for the wrong reasons. Our suite of tests have not only highlighted process based sources of uncertainty in model productivity calculations, they have also quantified the patterns and scale of this error. Combining these findings with PEcAn's model sensitivity analysis and variance decomposition strengthen our ability to identify which processes

  17. Quantitative modelling to estimate the transfer of pharmaceuticals through the food production system.

    Science.gov (United States)

    Chiţescu, Carmen Lidia; Nicolau, Anca Ioana; Römkens, Paul; Van Der Fels-Klerx, H J

    2014-01-01

    Use of pharmaceuticals in animal production may cause an indirect route of contamination of food products of animal origin. This study aimed to assess, through mathematical modelling, the transfer of pharmaceuticals from contaminated soil, through plant uptake, into the dairy food production chain. The scenarios, model parameters, and values refer to contaminants in emission slurry production, storage time, immission into soil, plant uptake, bioaccumulation in the animal's body, and transfer to meat and milk. Modelling results confirm the possibility of contamination of dairy cow's meat and milk due the ingestion of contaminated feed by the cattle. The estimated concentration of pharmaceutical residues obtained for meat ranged from 0 to 6 ng kg(-1) for oxytetracycline, from 0.011 to 0.181 μg kg(-1) for sulfamethoxazole, and from 4.70 to 11.86 μg kg(-1) for ketoconazole. The estimated concentrations for milk were: zero for oxytetracycline, lower than 40 ng L(-1) for sulfamethoxazole, and from 0.98 to 2.48 μg L(-1) for ketoconazole. Results obtained for the three selected pharmaceuticals indicate a minor risk for human health. This study showed that supply chain modelling could be an effective tool in assessing the indirect contamination of feedstuff and animal products by residues of pharmaceuticals. The model can easily be adjusted to other contaminants and supply chain and, in this way, present a valuable tool to underpin decision making.

  18. The browning value changes and spectral analysis on the Maillard reaction product from glucose and methionine model system

    Science.gov (United States)

    Al-Baarri, A. N.; Legowo, A. M.; Widayat

    2018-01-01

    D-glucose has been understood to provide the various effect on the reactivity in Maillard reaction resulting in the changes in physical performance of food product. Therefore this research was done to analyse physical appearance of Maillard reaction product made of D-glucose and methionine as a model system. The changes in browning value and spectral analysis model system were determined. The glucose-methionine model system was produced through the heating treatment at 50°C and RH 70% for 24 hours. The data were collected for every three hour using spectrophotometer. As result, browning value was elevated with the increase of heating time and remarkably high if compare to the D-glucose only. Furthermore, the spectral analysis showed that methionine turned the pattern of peak appearance. As conclusion, methionine raised the browning value and changed the pattern of spectral analysis in Maillard reaction model system.

  19. Creation and evaluation of a database of renewable production time series and other data for energy system modelling

    International Nuclear Information System (INIS)

    Janker, Karl Albert

    2015-01-01

    This thesis describes a model which generates renewable power generation time series as input data for energy system models. The focus is on photovoltaic systems and wind turbines. The basis is a high resolution global raster data set of weather data for many years. This data is validated, corrected and preprocessed. The composition of the hourly generation data is done via simulation of the respective technology. The generated time series are aggregated for different regions and are validated against historical production time series.

  20. Controls on terrestrial carbon feedbacks by productivity versus turnover in the CMIP5 Earth System Models

    Science.gov (United States)

    Koven, C. D.; Chambers, J. Q.; Georgiou, K.; Knox, R.; Negron-Juarez, R.; Riley, W. J.; Arora, V. K.; Brovkin, V.; Friedlingstein, P.; Jones, C. D.

    2015-09-01

    To better understand sources of uncertainty in projections of terrestrial carbon cycle feedbacks, we present an approach to separate the controls on modeled carbon changes. We separate carbon changes into four categories using a linearized, equilibrium approach: those arising from changed inputs (productivity-driven changes), and outputs (turnover-driven changes), of both the live and dead carbon pools. Using Coupled Model Intercomparison Project Phase 5 (CMIP5) simulations for five models, we find that changes to the live pools are primarily explained by productivity-driven changes, with only one model showing large compensating changes to live carbon turnover times. For dead carbon pools, the situation is more complex as all models predict a large reduction in turnover times in response to increases in productivity. This response arises from the common representation of a broad spectrum of decomposition turnover times via a multi-pool approach, in which flux-weighted turnover times are faster than mass-weighted turnover times. This leads to a shift in the distribution of carbon among dead pools in response to changes in inputs, and therefore a transient but long-lived reduction in turnover times. Since this behavior, a reduction in inferred turnover times resulting from an increase in inputs, is superficially similar to priming processes, but occurring without the mechanisms responsible for priming, we call the phenomenon "false priming", and show that it masks much of the intrinsic changes to dead carbon turnover times as a result of changing climate. These patterns hold across the fully coupled, biogeochemically coupled, and radiatively coupled 1 % yr-1 increasing CO2 experiments. We disaggregate inter-model uncertainty in the globally integrated equilibrium carbon responses to initial turnover times, initial productivity, fractional changes in turnover, and fractional changes in productivity. For both the live and dead carbon pools, inter-model spread in

  1. PRODUCT STRUCTURE DIGITAL MODEL

    Directory of Open Access Journals (Sweden)

    V.M. Sineglazov

    2005-02-01

    Full Text Available  Research results of representation of product structure made by means of CADDS5 computer-aided design (CAD system, Product Data Management Optegra (PDM system and Product Life Cycle Management Wind-chill system (PLM, are examined in this work. Analysis of structure component development and its storage in various systems is carried out. Algorithms of structure transformation required for correct representation of the structure are considered. Management analysis of electronic mockup presentation of the product structure is carried out for Windchill system.

  2. Toward a New Generation of Agricultural System Data, Models, and Knowledge Products: State of Agricultural Systems Science

    Science.gov (United States)

    Jones, James W.; Antle, John M.; Basso, Bruno; Boote, Kenneth J.; Conant, Richard T.; Foster, Ian; Godfray, H. Charles J.; Herrero, Mario; Howitt, Richard E.; Janssen, Sander; hide

    2016-01-01

    We review the current state of agricultural systems science, focusing in particular on the capabilities and limitations of agricultural systems models. We discuss the state of models relative to five different Use Cases spanning field, farm, landscape, regional, and global spatial scales and engaging questions in past, current, and future time periods. Contributions from multiple disciplines have made major advances relevant to a wide range of agricultural system model applications at various spatial and temporal scales. Although current agricultural systems models have features that are needed for the Use Cases, we found that all of them have limitations and need to be improved. We identified common limitations across all Use Cases, namely 1) a scarcity of data for developing, evaluating, and applying agricultural system models and 2) inadequate knowledge systems that effectively communicate model results to society. We argue that these limitations are greater obstacles to progress than gaps in conceptual theory or available methods for using system models. New initiatives on open data show promise for addressing the data problem, but there also needs to be a cultural change among agricultural researchers to ensure that data for addressing the range of Use Cases are available for future model improvements and applications. We conclude that multiple platforms and multiple models are needed for model applications for different purposes. The Use Cases provide a useful framework for considering capabilities and limitations of existing models and data.

  3. An Array-based Approach to Modelling Production Management System Architectures

    DEFF Research Database (Denmark)

    Falster, Peter

    2000-01-01

    Several proposals to a conceptual framework for production management architecture are briefly reviewed. It is suggested that an array-based approach and a classic engineering-economic model, is used as tools for a conceptualisation of ideas. Traditional architectural design is usually based...

  4. Model description of bactrial 3-methylcatechol production in one- and two-phase systems

    NARCIS (Netherlands)

    Husken, L.E.; Hoogakker, J.; Bont, de J.A.M.; Tramper, J.; Beeftink, H.H.

    2003-01-01

    Pseudomonas putida MC2 produces 3-methylcatechol from toluene in aqueous medium. A second phase of 1-octanol may improve total product accumulation. To optimise the design of such a biphasic process, a process model was developed, both for one- and two-phase applications. The insights obtained by

  5. A system dynamics modelling approach to assess the impact of launching a new nicotine product on population health outcomes.

    Science.gov (United States)

    Hill, Andrew; Camacho, Oscar M

    2017-06-01

    In 2012 the US FDA suggested the use of mathematical models to assess the impact of releasing new nicotine or tobacco products on population health outcomes. A model based on system dynamics methodology was developed to project the potential effects of a new nicotine product at a population level. A model representing traditional smoking populations (never, current and former smokers) and calibrated using historical data was extended to a two-product model by including electronic cigarettes use statuses. Smoking mechanisms, such as product initiation, switching, transition to dual use, and cessation, were represented as flows between smoking statuses (stocks) and the potential effect of smoking renormalisation through a feedback system. Mortality over a 50-year period (2000-2050) was the health outcome of interest, and was compared between two scenarios, with and without e-cigarettes being introduced. The results suggest that by 2050, smoking prevalence in adults was 12.4% in the core model and 9.7% (including dual users) in the counterfactual. Smoking-related mortality was 8.4% and 8.1%, respectively. The results suggested an overall beneficial effect from launching e-cigarettes and that system dynamics could be a useful approach to assess the potential population health effects of nicotine products when epidemiological data are not available. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  6. Neural network modeling of energy use and greenhouse gas emissions of watermelon production systems

    Directory of Open Access Journals (Sweden)

    Ashkan Nabavi-Pelesaraei

    2016-01-01

    Full Text Available This study was conducted in order to determine energy consumption, model and analyze the input–output, energy efficiencies and GHG emissions for watermelon production using artificial neural networks (ANNs in the Guilan province of Iran, based on three different farm sizes. For this purpose, the initial data was collected from 120 watermelon producers in Langroud and Chaf region, two small cities in the Guilan province. The results indicated that total average energy input for watermelon production was 40228.98 MJ ha–1. Also, chemical fertilizers (with 76.49% were the highest energy inputs for watermelon production. Moreover, the share of non-renewable energy (with 96.24% was more than renewable energy (with 3.76% in watermelon production. The rate of energy use efficiency, energy productivity and net energy was calculated as 1.29, 0.68 kg MJ−1 and 11733.64 MJ ha−1, respectively. With respect to GHG analysis, the average of total GHG emissions was calculated about 1015 kgCO2eq. ha−1. The results illustrated that share of nitrogen (with 54.23% was the highest in GHG emissions for watermelon production, followed by diesel fuel (with 16.73% and electricity (with 15.45%. In this study, Levenberg–Marquardt learning Algorithm was used for training ANNs based on data collected from watermelon producers. The ANN model with 11–10–2 structure was the best one for predicting the watermelon yield and GHG emissions. In the best topology, the coefficient of determination (R2 was calculated as 0.969 and 0.995 for yield and GHG emissions of watermelon production, respectively. Furthermore, the results of sensitivity analysis revealed that the seed and human labor had the highest sensitivity in modeling of watermelon yield and GHG emissions, respectively.

  7. Pesticide Product Label System

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Pesticide Product Label System (PPLS) provides a collection of pesticide product labels (Adobe PDF format) that have been approved by EPA under Section 3 of the...

  8. The Toyota product development system applied to a design management workshop model

    DEFF Research Database (Denmark)

    Thyssen, Mikael Hygum; Emmitt, Stephen; Bonke, Sten

    2008-01-01

    reports the early findings of a research project which aims to develop a workshop method for lean design management in construction through a deeper understanding of the Toyota product development system (TPDS) and value theory in general. Results from a case-study will be presented and a theoretical......Within a lean framework the goal is to enhance productivity by maximizing client value and minimizing waste known as muda. In the construction industry focus has mainly been on minimizing waste within the construction site production process. However, research has shown that a great amount...... of the waste experienced during site assembly can be traced back to the early design phase. In addition minimizing waste does not guarantee overall project success if client values are not fully under-stood. Indeed it is possible to effectively produce a product that the client does not value. This paper...

  9. The Toyota product development system applied to a design management workshop model

    DEFF Research Database (Denmark)

    Thyssen, Mikael Hygum; Emmitt, Stephen; Bonke, Sten

    2008-01-01

    reports the early findings of a research project which aims to develop a workshop method for lean design management in construction through a deeper understanding of the Toyota product development system (TPDS) and value theory in general. Results from a case-study will be presented and a theoretical...

  10. A model of lost habits : towards a strategy to improve the acceptance of product service systems

    NARCIS (Netherlands)

    Schotman, H.; Ludden, Geke Dina Simone

    2015-01-01

    User acceptance is one of the largest barriers for the success of product-service systems (PSS). Often, PSS require a user to change his or her behaviour, which may conflict with existing habits. This results in non-acceptance of the PSS, which is disappointing for designers who aim to develop

  11. Synthesis, Modelling and Evaluation of Pretreatment Technologies for Biofuels Production Systems

    DEFF Research Database (Denmark)

    Rodrigues Gurgel da Silva, Andrè

    2017-01-01

    was developed for process synthesis of a second generation bioethanol production process. The methodology was used to generate a set of alternatives for organosolv and ammonia fiber explosion (AFEX) pretreatment methods, and to evaluate hotspots in the systems for enhanced and more integrated setups....

  12. A optimization model for product returns using genetic algorithms and artificial immune system

    DEFF Research Database (Denmark)

    Diabat, Ali; Kannan, Devika; Kaliyan, Mathiyazhagan

    2013-01-01

    is developed to find out the number and location of initial collection points and centralized return centers required for an effective return and collection system, and also the maximum holding time (collection frequency) for aggregation of small volumes of returned products into large shipments. Two solution...

  13. Optimizing eukaryotic cell hosts for protein production through systems biotechnology and genome-scale modeling.

    Science.gov (United States)

    Gutierrez, Jahir M; Lewis, Nathan E

    2015-07-01

    Eukaryotic cell lines, including Chinese hamster ovary cells, yeast, and insect cells, are invaluable hosts for the production of many recombinant proteins. With the advent of genomic resources, one can now leverage genome-scale computational modeling of cellular pathways to rationally engineer eukaryotic host cells. Genome-scale models of metabolism include all known biochemical reactions occurring in a specific cell. By describing these mathematically and using tools such as flux balance analysis, the models can simulate cell physiology and provide targets for cell engineering that could lead to enhanced cell viability, titer, and productivity. Here we review examples in which metabolic models in eukaryotic cell cultures have been used to rationally select targets for genetic modification, improve cellular metabolic capabilities, design media supplementation, and interpret high-throughput omics data. As more comprehensive models of metabolism and other cellular processes are developed for eukaryotic cell culture, these will enable further exciting developments in cell line engineering, thus accelerating recombinant protein production and biotechnology in the years to come. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Optimised formation of blue Maillard reaction products of xylose and glycine model systems and associated antioxidant activity.

    Science.gov (United States)

    Yin, Zi; Sun, Qian; Zhang, Xi; Jing, Hao

    2014-05-01

    A blue colour can be formed in the xylose (Xyl) and glycine (Gly) Maillard reaction (MR) model system. However, there are fewer studies on the reaction conditions for the blue Maillard reaction products (MRPs). The objective of this study is to investigate characteristic colour formation and antioxidant activities in four different MR model systems and to determine the optimum reaction conditions for the blue colour formation in a Xyl-Gly MR model system, using the random centroid optimisation program. The blue colour with an absorbance peak at 630 nm appeared before browning in the Xyl-Gly MR model system, while no blue colour formation but only browning was observed in the xylose-alanine, xylose-aspartic acid and glucose-glycine MR model systems. The Xyl-Gly MR model system also showed higher antioxidant activity than the other three model systems. The optimum conditions for blue colour formation were as follows: xylose and glycine ratio 1:0.16 (M:M), 0.20 mol L⁻¹ NaHCO₃, 406.1 mL L⁻¹ ethanol, initial pH 8.63, 33.7°C for 22.06 h, which gave a much brighter blue colour and a higher peak at 630 nm. A characteristic blue colour could be formed in the Xyl-Gly MR model system and the optimum conditions for the blue colour formation were proposed and confirmed. © 2013 Society of Chemical Industry.

  15. RAMI modeling of plant systems for proposed tritium production and extraction facilities

    International Nuclear Information System (INIS)

    Blanchard, A.

    2000-01-01

    The control of life-cycle cost is a primary concern during the development, construction, operation, and decommissioning of DOE systems and facilities. An effective tool that can be used to control these costs, beginning with the design stage, is called a reliability, availability, maintainability, and inspectability analysis or, simply, RAMI for short. In 1997, RAMI technology was introduced to the Savannah River Site with applications at the conceptual design stage beginning with the Accelerator Production of Tritium (APT) Project and later extended to the Commercial Light Water Reactor (CLWR) Tritium Extraction Facility (TEF) Project. More recently it has been applied to the as-build Water Treatment Facilities designed for ground water environmental restoration. This new technology and database was applied to the assessment of balance-of-plant systems for the APT Conceptual Design Report. Initial results from the Heat Removal System Assessment revealed that the system conceptual design would cause the APT to fall short of its annual production goal. Using RAM technology to immediately assess this situation, it was demonstrated that the product loss could be gained back by upgrading the system's chiller unit capacity at a cost of less than $1.3 million. The reclaimed production is worth approximately $100 million. The RAM technology has now been extended to assess the conceptual design for the CLWR-TEF Project. More specifically, this technology and database is being used to translate high level availability goals into lower level system design requirements that will ensure the TEF meets its production goal. Results, from the limited number of system assessments performed to date, have already been used to modify the conceptual design for a remote handling system, improving its availability to the point that a redundant system, with its associated costs of installation and operation may no longer be required. RAMI results were also used to justify the elimination

  16. A general model of resource production and exchange in systems of interdependent specialists.

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, Stephen Hamilton; Finley, Patrick D.; Beyeler, Walter Eugene; Brown, Theresa Jean; Glass, Robert John, Jr.; Breen, Peter; Kuypers, Marshall; Norton, Matthew David; Quach, Tu-Thach; Antognoli, Matthew; Mitchell, Michael David

    2011-11-01

    Infrastructures are networks of dynamically interacting systems designed for the flow of information, energy, and materials. Under certain circumstances, disturbances from a targeted attack or natural disasters can cause cascading failures within and between infrastructures that result in significant service losses and long recovery times. Reliable interdependency models that can capture such multi-network cascading do not exist. The research reported here has extended Sandia's infrastructure modeling capabilities by: (1) addressing interdependencies among networks, (2) incorporating adaptive behavioral models into the network models, and (3) providing mechanisms for evaluating vulnerability to targeted attack and unforeseen disruptions. We have applied these capabilities to evaluate the robustness of various systems, and to identify factors that control the scale and duration of disruption. This capability lays the foundation for developing advanced system security solutions that encompass both external shocks and internal dynamics.

  17. Amino acid catabolism-directed biofuel production in Clostridium sticklandii: An insight into model-driven systems engineering

    Directory of Open Access Journals (Sweden)

    C Sangavai

    2017-12-01

    Full Text Available Model-driven systems engineering has been more fascinating process for the microbial production of biofuel and bio-refineries in chemical and pharmaceutical industries. Genome-scale modeling and simulations have been guided for metabolic engineering of Clostridium species for the production of organic solvents and organic acids. Among them, Clostridium sticklandii is one of the potential organisms to be exploited as a microbial cell factory for biofuel production. It is a hyper-ammonia producing bacterium and is able to catabolize amino acids as important carbon and energy sources via Stickland reactions and the development of the specific pathways. Current genomic and metabolic aspects of this bacterium are comprehensively reviewed herein, which provided information for learning about protein catabolism-directed biofuel production. It has a metabolic potential to drive energy and direct solventogenesis as well as acidogenesis from protein catabolism. It produces by-products such as ethanol, acetate, n-butanol, n-butyrate and hydrogen from amino acid catabolism. Model-driven systems engineering of this organism would improve the performance of the industrial sectors and enhance the industrial economy by using protein-based waste in environment-friendly ways. Keywords: Biofuel, Amino acid catabolism, Genome-scale model, Metabolic engineering, Systems biology, ABE fermentation, Clostridium sticklandii

  18. Aflatoxin production in a meat mix model system in the presence of Pediococcus and Lactobacillus

    International Nuclear Information System (INIS)

    Luchese, R.H.; Martins, J.F.P.; Harrigan, W.F.

    1992-01-01

    The effect on aflatoxin production by Aspergillus parasiticus of eight individual strains of Pediococcus and Lactobacillus was determined. The study was conducted in an axenic cultural system in which irradiated meat was employed in the formulation of a meat medium. The medium composition and incubation temperatures were simulations of Brazilian salami processing conditions. All single cultures of A. parasiticus supported aflatoxin production. More aflatoxin was produced in samples treated by the addition of lactic acid than in nontreated ones. Aflatoxin was not detected when A. parasiticus was grown with lactic acid bacteria, although visible mold growth was observed in all such cultures

  19. Production Systems and Supplier Selection

    DEFF Research Database (Denmark)

    Pedraza-Acosta, Isabel; Pilkington, Alan; Barnes, David

    2016-01-01

    Purpose: This paper presents a combined multi-phase supplier selection model. The process repeatedly revisits the criteria and sourcing decision as the development process continues. This enables a structured adoption of product and production system innovation from strategic suppliers, where...... strategic stamping suppliers. Findings: Our contribution is the multi-phased production and product innovation process. This is an advance from traditional supplier selection and also an extension of ideas of supplier-located product development as it includes production system development, and complements...... the literature on working with strategic suppliers. Specifically, we explicitly articulate the previously unreported issue of whether a supplier chosen for its innovation capabilities at the start of the new product development process will also be the most appropriate supplier during the production system...

  20. Product and Process Modelling

    DEFF Research Database (Denmark)

    Cameron, Ian T.; Gani, Rafiqul

    This book covers the area of product and process modelling via a case study approach. It addresses a wide range of modelling applications with emphasis on modelling methodology and the subsequent in-depth analysis of mathematical models to gain insight via structural aspects of the models....... These approaches are put into the context of life cycle modelling, where multiscale and multiform modelling is increasingly prevalent in the 21st century. The book commences with a discussion of modern product and process modelling theory and practice followed by a series of case studies drawn from a variety...... to biotechnology applications, food, polymer and human health application areas. The book highlights to important nature of modern product and process modelling in the decision making processes across the life cycle. As such it provides an important resource for students, researchers and industrial practitioners....

  1. Modelling a demand driven biogas system for production of electricity at peak demand and for production of biomethane at other times.

    Science.gov (United States)

    O'Shea, R; Wall, D; Murphy, J D

    2016-09-01

    Four feedstocks were assessed for use in a demand driven biogas system. Biomethane potential (BMP) assays were conducted for grass silage, food waste, Laminaria digitata and dairy cow slurry. Semi-continuous trials were undertaken for all feedstocks, assessing biogas and biomethane production. Three kinetic models of the semi-continuous trials were compared. A first order model most accurately correlated with gas production in the pulse fed semi-continuous system. This model was developed for production of electricity on demand, and biomethane upgrading. The model examined a theoretical grass silage digester that would produce 435kWe in a continuous fed system. Adaptation to demand driven biogas required 187min to produce sufficient methane to run a 2MWe combined heat and power (CHP) unit for 60min. The upgrading system was dispatched 71min following CHP shutdown. Of the biogas produced 21% was used in the CHP and 79% was used in the upgrading system. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Product-Process-Machine” System Modeling: Approach and Industrial Case Studies

    OpenAIRE

    Smirnov, Alexander; Sandkuhl, Kurt; Shilov, Nikolay; Kashevnik, Alexey

    2013-01-01

    Part 6: Enterprise Modelling Cases; International audience; Global trends in the worldwide economy lead to new challenges for manufacturing enterprises and to new requirements regarding modeling industrial organizations, like integration of real-time information from operations and information about neighboring enterprises in the value network. Consequently, there is a need to design new, knowledge-based workflows and supporting software systems to increase efficiency of designing and maintai...

  3. Construction and Application of an LP Farm Model with an Integrated Life Cycle Assessment for the Determination of Sustainable Milk Production Systems

    OpenAIRE

    Mohring, Anke; Zimmermann, Albert

    2005-01-01

    The increasingly stringent conditions underlying Swiss dairy production demand sustainable milk production systems that are economically optimized but also meet the ecological requirements of society. To determine such systems, a comparative-static LP model was constructed at farm level. Realistic production systems are reproduced in the model by means of binary variables. An Life Cycle Assessment (LCA) was integrated into the model to determine the environmental impacts of the farm. To this ...

  4. Innovativeness in production systems

    DEFF Research Database (Denmark)

    Blichfeldt, Henrik; Knudsen, Mette Præst

    a positive influence of the ability of the manufacturing system to provide specific capabilities that enables the entire production system to positively influence the competitiveness. A comparative case study of three SMEs shows that competitive advantages are obtained through innovative technologies......Alignment of market demand and manufacturing capabilities are directly linked to the potential competitive advantage. Pressure for manufacturing companies to customize increase the need for productions systems to handle innovations, especially in SMEs. The paper claims that innovativeness has...

  5. Product Platform Modeling

    DEFF Research Database (Denmark)

    Pedersen, Rasmus

    on the notion that reuse and encapsulation of platform elements are fundamental characteristics of a product platform. Reuse covers the desire to reuse and share certain assets across a family of products and/or across generations of products. Product design solutions and principles are often regarded...... as important assets in a product platform, yet activities, working patterns, processes and knowledge can also be reused in a platform approach. Encapsulation is seen as a process in which the different elements of a platform are grouped into well defined and self-contained units which are decoupled from each...... support decision makers during a product platform project. The reaction from stakeholders in the case companies indicates that the decision base is improved by means of visual models. Another finding is that the sometimes rather theoretical and intangible phenomena can be instantiated in models...

  6. Amino acid catabolism-directed biofuel production inClostridium sticklandii:An insight into model-driven systems engineering.

    Science.gov (United States)

    Sangavai, C; Chellapandi, P

    2017-12-01

    Model-driven systems engineering has been more fascinating process for the microbial production of biofuel and bio-refineries in chemical and pharmaceutical industries. Genome-scale modeling and simulations have been guided for metabolic engineering of Clostridium species for the production of organic solvents and organic acids. Among them, Clostridium sticklandii is one of the potential organisms to be exploited as a microbial cell factory for biofuel production. It is a hyper-ammonia producing bacterium and is able to catabolize amino acids as important carbon and energy sources via Stickland reactions and the development of the specific pathways. Current genomic and metabolic aspects of this bacterium are comprehensively reviewed herein, which provided information for learning about protein catabolism-directed biofuel production. It has a metabolic potential to drive energy and direct solventogenesis as well as acidogenesis from protein catabolism. It produces by-products such as ethanol, acetate, n -butanol, n -butyrate and hydrogen from amino acid catabolism. Model-driven systems engineering of this organism would improve the performance of the industrial sectors and enhance the industrial economy by using protein-based waste in environment-friendly ways.

  7. Strategic system development toward biofuel, desertification, and crop production monitoring in continental scales using satellite-based photosynthesis models

    Science.gov (United States)

    Kaneko, Daijiro

    2013-10-01

    The author regards fundamental root functions as underpinning photosynthesis activities by vegetation and as affecting environmental issues, grain production, and desertification. This paper describes the present development of monitoring and near real-time forecasting of environmental projects and crop production by approaching established operational monitoring step-by-step. The author has been developing a thematic monitoring structure (named RSEM system) which stands on satellite-based photosynthesis models over several continents for operational supports in environmental fields mentioned above. Validation methods stand not on FLUXNET but on carbon partitioning validation (CPV). The models demand continuing parameterization. The entire frame system has been built using Reanalysis meteorological data, but model accuracy remains insufficient except for that of paddy rice. The author shall accomplish the system that incorporates global environmental forces. Regarding crop production applications, industrialization in developing countries achieved through direct investment by economically developed nations raises their income, resulting in increased food demand. Last year, China began to import rice as it had in the past with grains of maize, wheat, and soybeans. Important agro-potential countries make efforts to cultivate new crop lands in South America, Africa, and Eastern Europe. Trends toward less food sustainability and stability are continuing, with exacerbation by rapid social and climate changes. Operational monitoring of carbon sequestration by herbaceous and bore plants converges with efforts at bio-energy, crop production monitoring, and socio-environmental projects such as CDM A/R, combating desertification, and bio-diversity.

  8. Modelling for an improved integrated multi-trophic aquaculture system for the production of highly valued marine species

    Directory of Open Access Journals (Sweden)

    Luana Granada

    2014-05-01

    Full Text Available Integrated multi-trophic aquaculture (IMTA is regarded as a suitable approach to limit aquaculture nutrients and organic matter outputs through biomitigation. Here, species from different trophic or nutritional levels are connected through water transfer. The co-cultured species are used as biofilters, and each level has its own independent commercial value, providing both economic and environmental sustainability. In order to better understand and optimize aquaculture production systems, dynamic modelling has been developed towards the use of models for analysis and simulation of aquacultures. Several models available determine the carrying capacity of farms and the environmental effects of bivalve and fish aquaculture. Also, in the last two decades, modelling strategies have been designed in order to predict the dispersion and deposition of organic fish farm waste, usually using the mean settling velocity of faeces and feed pellets. Cultured organisms growth, effects of light and temperature on algae growth, retention of suspended solids, biodegradation of nitrogen and wastewater treatment are examples of other modelled parameters in aquaculture. Most modelling equations have been developed for monocultures, despite the increasing importance of multi-species systems, such as polyculture and IMTA systems. The main reason for the development of multi-species models is to maximize the production and optimize species combinations in order to reduce the environmental impacts of aquaculture. Some multi-species system models are available, including from the polyculture of different species of bivalves with fish to more complex systems with four trophic levels. These can incorporate ecosystem models and use dynamic energy budgets for each trophic group. In the proposed IMTA system, the bioremediation potential of the marine seaweed Gracilaria vermiculophylla (nutrient removal performance and the Mediterranean filter-feeding polychaete Sabella

  9. Process based system models for detecting opportunities and threats : the case of World Cement Production

    OpenAIRE

    Isaksson, Raine

    2016-01-01

    Background Visualising change needs could be complex. One way of sense - making is to use process based system models. G lobal warming require s major changes in many fields and especially for cement manufacturing, which represents a growing portion of manmade carbon emissions . The industry has proposed measures for change , but it is diff icult to assess how good these are and more sense - making is needed to clarify the situation. Purpose The purpose is to visualise opportunities and threa...

  10. Investigation of heat induced reactions between lipid oxidation products and amino acids in lipid rich model systems and hazelnuts.

    Science.gov (United States)

    Karademir, Yeşim; Göncüoğlu, Neslihan; Gökmen, Vural

    2013-07-01

    This study aimed to investigate the contribution of lipid oxidation to non-enzymatic browning reactions in lipid rich model and actual food systems. Hazelnut oil and model reaction mixtures consisting of different amino acids were heated under certain conditions to determine possible lipid oxidation and non-enzymatic browning reaction products. In model systems, the Schiff base of 2,4-decadienal, its decarboxylated form, and reaction products formed after hydrolytic cleavage of the Schiff base or decarboxylated form were identified by high resolution mass spectrometry. No furosine was detected in hazelnuts after roasting at 160 °C while the concentration of free amino acids significantly decreased. 2,4-Decadienal reacted effectively with all amino acids studied through a Maillard type carbonyl-amine condensation pathway. (2E,4E)-Deca-2,4-dien-1-amine was identified as a typical reaction product in model systems and roasted hazelnuts. In lipid-rich foods like hazelnuts, lipid-derived carbonyls might be responsible for potential modifications of free and protein bound amino acids during heating.

  11. High-intensity ultrasound production of Maillard reaction flavor compounds in a cysteine-xylose model system.

    Science.gov (United States)

    Ong, Olivia X H; Seow, Yi-Xin; Ong, Peter K C; Zhou, Weibiao

    2015-09-01

    Application of high intensity ultrasound has shown potential in the production of Maillard reaction odor-active flavor compounds in model systems. The impact of initial pH, sonication duration, and ultrasound intensity on the production of Maillard reaction products (MRPs) by ultrasound processing in a cysteine-xylose model system were evaluated using Response Surface Methodology (RSM) with a modified mathematical model. Generation of selected MRPs, 2-methylthiophene and tetramethyl pyrazine, was optimal at an initial pH of 6.00, accompanied with 78.1 min of processing at an ultrasound intensity of 19.8 W cm(-2). However, identification of volatiles using gas chromatography-mass spectrometry (GC/MS) revealed that ultrasound-assisted Maillard reactions generated fewer sulfur-containing volatile flavor compounds as compared to conventional heat treatment of the model system. Likely reasons for this difference in flavor profile include the expulsion of H2S due to ultrasonic degassing and inefficient transmission of ultrasonic energy. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. Evaluation of Simulated Marine Aerosol Production Using the WaveWatchIII Prognostic Wave Model Coupled to the Community Atmosphere Model within the Community Earth System Model

    Energy Technology Data Exchange (ETDEWEB)

    Long, M. S. [Harvard Univ., Cambridge, MA (United States). School of Engineering and Applied Sciences; Keene, William C. [Univ. of Virginia, Charlottesville, VA (United States). Dept. of Environmental Sciences; Zhang, J. [Univ. of North Dakota, Grand Forks, ND (United States). Dept. of Atmospheric Sciences; Reichl, B. [Univ. of Rhode Island, Narragansett, RI (United States). Graduate School of Oceanography; Shi, Y. [Univ. of North Dakota, Grand Forks, ND (United States). Dept. of Atmospheric Sciences; Hara, T. [Univ. of Rhode Island, Narragansett, RI (United States). Graduate School of Oceanography; Reid, J. S. [Naval Research Lab. (NRL), Monterey, CA (United States); Fox-Kemper, B. [Brown Univ., Providence, RI (United States). Earth, Environmental and Planetary Sciences; Craig, A. P. [National Center for Atmospheric Research, Boulder, CO (United States); Erickson, D. J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Computer Science and Mathematics Division; Ginis, I. [Univ. of Rhode Island, Narragansett, RI (United States). Graduate School of Oceanography; Webb, A. [Univ. of Tokyo (Japan). Dept. of Ocean Technology, Policy, and Environment

    2016-11-08

    Primary marine aerosol (PMA) is emitted into the atmosphere via breaking wind waves on the ocean surface. Most parameterizations of PMA emissions use 10-meter wind speed as a proxy for wave action. This investigation coupled the 3rd generation prognostic WAVEWATCH-III wind-wave model within a coupled Earth system model (ESM) to drive PMA production using wave energy dissipation rate – analogous to whitecapping – in place of 10-meter wind speed. The wind speed parameterization did not capture basin-scale variability in relations between wind and wave fields. Overall, the wave parameterization did not improve comparison between simulated versus measured AOD or Na+, thus highlighting large remaining uncertainties in model physics. Results confirm the efficacy of prognostic wind-wave models for air-sea exchange studies coupled with laboratory- and field-based characterizations of the primary physical drivers of PMA production. No discernible correlations were evident between simulated PMA fields and observed chlorophyll or sea surface temperature.

  13. Prediction of China's coal production-environmental pollution based on a hybrid genetic algorithm-system dynamics model

    International Nuclear Information System (INIS)

    Yu Shiwei; Wei Yiming

    2012-01-01

    This paper proposes a hybrid model based on genetic algorithm (GA) and system dynamics (SD) for coal production–environmental pollution load in China. GA has been utilized in the optimization of the parameters of the SD model to reduce implementation subjectivity. The chain of “Economic development–coal demand–coal production–environmental pollution load” of China in 2030 was predicted, and scenarios were analyzed. Results show that: (1) GA performs well in optimizing the parameters of the SD model objectively and in simulating the historical data; (2) The demand for coal energy continuously increases, although the coal intensity has actually decreased because of China's persistent economic development. Furthermore, instead of reaching a turning point by 2030, the environmental pollution load continuously increases each year even under the scenario where coal intensity decreased by 20% and investment in pollution abatement increased by 20%; (3) For abating the amount of “three types of wastes”, reducing the coal intensity is more effective than reducing the polluted production per tonne of coal and increasing investment in pollution control. - Highlights: ► We propos a GA-SD model for China's coal production-pollution prediction. ► Genetic algorithm (GA) can objectively and accurately optimize parameters of system dynamics (SD) model. ► Environmental pollution in China is projected to grow in our scenarios by 2030. ► The mechanism of reducing waste production per tonne of coal mining is more effective than others.

  14. Vegetable Production System (Veggie)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Vegetable Production System (Veggie) was developed to be a simple, easily stowed, high growth volume, low resource facility capable of producing fresh vegetables...

  15. Leaf chlorophyll constraint on model simulated gross primary productivity in agricultural systems

    KAUST Repository

    Houborg, Rasmus

    2015-05-05

    Leaf chlorophyll content (Chll) may serve as an observational proxy for the maximum rate of carboxylation (Vmax), which describes leaf photosynthetic capacity and represents the single most important control on modeled leaf photosynthesis within most Terrestrial Biosphere Models (TBMs). The parameterization of Vmax is associated with great uncertainty as it can vary significantly between plants and in response to changes in leaf nitrogen (N) availability, plant phenology and environmental conditions. Houborg et al. (2013) outlined a semi-mechanistic relationship between V max 25 (Vmax normalized to 25 °C) and Chll based on inter-linkages between V max 25 , Rubisco enzyme kinetics, N and Chll. Here, these relationships are parameterized for a wider range of important agricultural crops and embedded within the leaf photosynthesis-conductance scheme of the Community Land Model (CLM), bypassing the questionable use of temporally invariant and broadly defined plant functional type (PFT) specific V max 25 values. In this study, the new Chll constrained version of CLM is refined with an updated parameterization scheme for specific application to soybean and maize. The benefit of using in-situ measured and satellite retrieved Chll for constraining model simulations of Gross Primary Productivity (GPP) is evaluated over fields in central Nebraska, U.S.A between 2001 and 2005. Landsat-based Chll time-series records derived from the Regularized Canopy Reflectance model (REGFLEC) are used as forcing to the CLM. Validation of simulated GPP against 15 site-years of flux tower observations demonstrate the utility of Chll as a model constraint, with the coefficient of efficiency increasing from 0.91 to 0.94 and from 0.87 to 0.91 for maize and soybean, respectively. Model performances particularly improve during the late reproductive and senescence stage, where the largest temporal variations in Chll (averaging 35–55 μg cm−2 for maize and 20–35 μg cm−2 for soybean) are

  16. Models and methods for design and implementation of computer based control and monitoring systems for production cells

    DEFF Research Database (Denmark)

    Lynggaard, Hans Jørgen Birk

    based control and monitoring systems for production cells.The manufacturing environment and the current practice for engineering of cells control systems are described and automation software enablers are discussed. A number of problems related to these issues are identified. In order to support......This dissertation is concerned with the engineering, i.e. the designing and making, of industrial cell control systems. The focus is on automated robot welding cells in the shipbuilding industry. The industrial research project defines models and methods for design and implementation of computer...... engineering of cell control systems by the use of enablers, a generic cell control data model and an architecture are defined. Further, an engineering methodology is defined. The three element enablers, architecture and methodology consitutes the Cell Control Engineering concept which is defined and evaluated...

  17. Energy production systems engineering

    CERN Document Server

    Blair, Thomas Howard

    2017-01-01

    Energy Production Systems Engineering presents IEEE, Electrical Apparatus Service Association (EASA), and International Electrotechnical Commission (IEC) standards of engineering systems and equipment in utility electric generation stations. Electrical engineers that practice in the energy industry must understand the specific characteristics of electrical and mechanical equipment commonly applied to energy production and conversion processes, including the mechanical and chemical processes involved, in order to design, operate and maintain electrical systems that support and enable these processes. To aid this understanding, Energy Production Systems Engineeringdescribes the equipment and systems found in various types of utility electric generation stations. This information is accompanied by examples and practice problems. It also addresses common issues of electrical safety that arise in electric generation stations.

  18. Poly-N-acetylglucosamine production in Staphylococcus aureus is essential for virulence in murine models of systemic infection.

    Science.gov (United States)

    Kropec, Andrea; Maira-Litran, Tomas; Jefferson, Kimberly K; Grout, Martha; Cramton, Sarah E; Götz, Friedrich; Goldmann, Donald A; Pier, Gerald B

    2005-10-01

    The contribution of the Staphylococcus aureus surface polysaccharide poly-N-acetylglucosamine (PNAG) to virulence was evaluated in three mouse models of systemic infection: bacteremia, renal abscess formation, and lethality following high-dose intraperitoneal (i.p.) infection. Deletion of the intercellular adhesin (ica) locus that encodes the biosynthetic enzymes for PNAG production in S. aureus strains Mn8, Newman, and NCTC 10833 resulted in mutant strains with significantly reduced abilities to maintain bacterial levels in blood following intravenous or i.p. injection, to spread systemically to the kidneys following i.p. injection, or to induce a moribund/lethal state following i.p. infection. In the bacteremia model, neither growth phase nor growth medium used to prepare the S. aureus inoculum affected the conclusion that PNAG production was needed for full virulence. As the SarA regulatory protein has been shown to affect ica transcription, PNAG synthesis, and biofilm formation, we also evaluated S. aureus strains Mn8 and 10833 deleted for the sarA gene in the renal infection model. A decrease in PNAG production was seen in sarA mutants using immunoblots of cell surface extracts but was insufficient to reduce the virulence of sarA-deleted strains in this model. S. aureus strains deleted for the ica genes were much more susceptible to antibody-independent opsonic killing involving human peripheral blood leukocytes and rabbit complement. Thus, PNAG confers on S. aureus resistance to killing mediated by these innate host immune mediators. Overall, PNAG production by S. aureus appears to be a critical virulence factor as assessed in murine models of systemic infection.

  19. MASS CUSTOMIZATION and PRODUCT MODELS

    DEFF Research Database (Denmark)

    Svensson, Carsten; Malis, Martin

    2003-01-01

    to the product. Through the application of a mass customization strategy, companies have a unique opportunity to create increased customer satisfaction. In a customized production, knowledge and information have to be easily accessible since every product is a unique combination of information. If the dream......When dealing with complex product models, efficient knowledge distribution is essential to obtain success. This paper describes how product models can be applied to support the knowledge distribution. The change towards individualization will radically affect the knowledge application in relation...... of a customized alternative instead of a uniform mass-produced product shall become a reality, then the cross-organizational efficiency must be kept at a competitive level. This is the real challenge for mass customization. A radical restructuring of both the internal and the external knowledge management systems...

  20. Defining product service systems

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles; Andreasen, Mogens Myrup

    2002-01-01

    artefact and instead provides what the customer really wants the actual functionality from the product. This enables a series of potential improvements to the product´s performance throughout its lifecycle. The ideal of product service system (PSS) development is that all three stakeholder groups customer......, for example, a factor 20 improvement in our environmental performance. One attempt, however, has recently emerged, which combines the product as an artefact with the service that the product provides to the user. Through the combination of these two facets, the company retains ownership of the physical......, company and society benefit from the service systems related to each one of these dimensions, rather than simply one of the above. There are existing examples of the enhancement of business and market share by focusing on PSS, but this is often not a result of upfront strategy and ambitious goals. We...

  1. Macro-System Model: A Federated Object Model for Cross-Cutting Analysis of Hydrogen Production, Delivery, Consumption and Associated Emissions; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, M.; Diakov, V.; Goldsby, M. E.; Sa, T. J.

    2010-12-01

    It is commonly accepted that the introduction of hydrogen as an energy carrier for light-duty vehicles involves concomitant technological development of infrastructure elements, such as production, delivery, and consumption, all associated with certain emission levels. To analyze these at a system level, the suite of corresponding models developed by the United States Department of Energy and involving several national laboratories is combined in one macro-system model (MSM). The macro-system model is being developed as a cross-cutting analysis tool that combines a set of hydrogen technology analysis models. Within the MSM, a federated simulation framework is used for consistent data transfer between the component models. The framework is built to suit cross-model as well as cross-platform data exchange and involves features of 'over-the-net' computation.

  2. Belle II production system

    Science.gov (United States)

    Miyake, Hideki; Grzymkowski, Rafal; Ludacka, Radek; Schram, Malachi

    2015-12-01

    The Belle II experiment will record a similar quantity of data to LHC experiments and will acquire it at similar rates. This requires considerable computing, storage and network resources to handle not only data created by the experiment but also considerable amounts of simulated data. Consequently Belle II employs a distributed computing system to provide the resources coordinated by the the DIRAC interware. DIRAC is a general software framework that provides a unified interface among heterogeneous computing resources. In addition to the well proven DIRAC software stack, Belle II is developing its own extension called BelleDIRAC. BelleDIRAC provides a transparent user experience for the Belle II analysis framework (basf2) on various environments and gives access to file information managed by LFC and AMGA metadata catalog. By unifying DIRAC and BelleDIRAC functionalities, Belle II plans to operate an automated mass data processing framework named a “production system”. The Belle II production system enables large-scale raw data transfer from experimental site to raw data centers, followed by massive data processing, and smart data delivery to each remote site. The production system is also utilized for simulated data production and data analysis. Although development of the production system is still on-going, recently Belle II has prepared prototype version and evaluated it with a large scale simulated data production. In this presentation we will report the evaluation of the prototype system and future development plans.

  3. RAMI modeling of selected balance of plant systems for the proposed Accelerator Production of Tritium (APT) project

    International Nuclear Information System (INIS)

    Radder, J.A.; Cramer, D.S.

    1997-01-01

    In order to meet Department of Energy (DOE) Defense Program requirements for tritium in the 2005-2007 time frame, new production capability must be made available. The Accelerator Production of Tritium (APT) Plant is being considered as an alternative to nuclear reactor production of tritium, which has been the preferred method in the past. The proposed APT plant will use a high-power proton accelerator to generate thermal neutrons that will be captured in 3 He to produce tritium (3H). It is expected that the APT Plant will be built and operated at the DOE's Savannah River Site (SRS) in Aiken, South Carolina. Discussion is focused on Reliability, Availability, Maintainability, and Inspectability (RAMI) modeling of recent conceptual designs for balance of plant (BOP) systems in the proposed APT Plant. In the conceptual designs for balance of plant (BOP) systems in the proposed APT Plant. In the conceptual design phase, system RAMI estimates are necessary to identify the best possible system alternative and to provide a valid picture of the cost effectiveness of the proposed system for comparison with other system alternatives. RAMI estimates in the phase must necessarily be based on generic data. The objective of the RAMI analyses at the conceptual design stage is to assist the designers in achieving an optimum design which balances the reliability and maintainability requirements among the subsystems and components

  4. Modeling ecohydrological dynamics of smallholder strategies for food production in dryland agricultural systems

    Science.gov (United States)

    Gower, Drew B.; Dell'Angelo, Jampel; McCord, Paul F.; Caylor, Kelly K.; Evans, Tom P.

    2016-11-01

    In dryland environments, characterized by low and frequently variable rainfall, smallholder farmers must take crop water sensitivity into account along with other characteristics like seed availability and market price when deciding what to plant. In this paper we use the results of surveys conducted among smallholders located near Mount Kenya to identify clusters of farmers devoting different fractions of their land to subsistence and market crops. Additionally, we explore the tradeoffs between water-insensitive but low-value subsistence crops and a water-sensitive but high-value market crop using a numerical model that simulates soil moisture dynamics and crop production over multiple growing seasons. The cluster analysis shows that most farmers prefer to plant either only subsistence crops or only market crops, with a minority choosing to plant substantial fractions of both. The model output suggests that the value a farmer places on a successful growing season, a measure of risk aversion, plays a large role in whether the farmer chooses a subsistence or market crop strategy. Furthermore, access to irrigation, makes market crops more appealing, even to very risk-averse farmers. We then conclude that the observed clustering may result from different levels of risk aversion and access to irrigation.

  5. Biodiesel and electrical power production through vegetable oil extraction and byproducts gasification: modeling of the system.

    Science.gov (United States)

    Allesina, Giulio; Pedrazzi, Simone; Tebianian, Sina; Tartarini, Paolo

    2014-10-01

    Aim of this work is to introduce an alternative to the standard biodiesel production chain, presenting an innovative in situ system. It is based on the chemical conversion of vegetable oil from oleaginous crops in synergy with the gasification of the protein cake disposed by the seed press. The syngas from the gasifier is here used to produce electrical power while part of it is converted into methanol. The methanol is finally used to transform the vegetable oil into biodiesel. Through a coupled use of ASPEN PLUS(TM) and MATLAB(TM) codes, a rapeseed, soy and sunflower rotation, with a duration of three year, was simulated considering 15ha of soil. This surface resulted sufficient to feed a 7kWel power plant. Simulation outputs proven the system to be self-sustainable. In addition, economical NPV of the investment is presented. Finally the environmental, economical and social advantages related to this approach are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. A systems biology approach to reconcile metabolic network models with application to Synechocystis sp. PCC 6803 for biofuel production.

    Science.gov (United States)

    Mohammadi, Reza; Fallah-Mehrabadi, Jalil; Bidkhori, Gholamreza; Zahiri, Javad; Javad Niroomand, Mohammad; Masoudi-Nejad, Ali

    2016-07-19

    Production of biofuels has been one of the promising efforts in biotechnology in the past few decades. The perspective of these efforts can be reduction of increasing demands for fossil fuels and consequently reducing environmental pollution. Nonetheless, most previous approaches did not succeed in obviating many big challenges in this way. In recent years systems biology with the help of microorganisms has been trying to overcome these challenges. Unicellular cyanobacteria are widespread phototrophic microorganisms that have capabilities such as consuming solar energy and atmospheric carbon dioxide for growth and thus can be a suitable chassis for the production of valuable organic materials such as biofuels. For the ultimate use of metabolic potential of cyanobacteria, it is necessary to understand the reactions that are taking place inside the metabolic network of these microorganisms. In this study, we developed a Java tool to reconstruct an integrated metabolic network of a cyanobacterium (Synechocystis sp. PCC 6803). We merged three existing reconstructed metabolic networks of this microorganism. Then, after modeling for biofuel production, the results from flux balance analysis (FBA) disclosed an increased yield in biofuel production for ethanol, isobutanol, 3-methyl-1-butanol, 2-methyl-1-butanol, and propanol. The numbers of blocked reactions were also decreased for 2-methyl-1-butanol production. In addition, coverage of the metabolic network in terms of the number of metabolites and reactions was increased in the new obtained model.

  7. ATLAS production system

    CERN Document Server

    Borodin, Mikhail; The ATLAS collaboration; De, Kaushik; Klimentov, Alexei; Golubkov, Dmitry; Maeno, Tadashi; Mashinistov, Ruslan; Wenaus, Torre; Padolski, Siarhei

    2016-01-01

    The second generation of the ATLAS production system called ProdSys2 is a distributed workload manager which used by thousands of physicists to analyze the data remotely, with the volume of processed data is beyond the exabyte scale, across a more than hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based on many criterias, such as input and output size, memory requirements and CPU consumption with manageable scheduling policies and by supporting different kind of computational resources, such as GRID, clouds, supercomputers and volunteering computers. Besides jobs definition Production System also includes flexible web user interface, which implements user-friendly environment for main ATLAS workflows, e.g. simple way of combining different data flows, and real-time monitoring, optimised for using with huge amount of information to present. We present an overview of the ATLAS Production System major components: job and task definition, workflow manager web user i...

  8. Virtual modelling of components of a production system as the tool of lean engineering

    Science.gov (United States)

    Monica, Z.

    2015-11-01

    Between the most effective techniques of manufacturing management is considered the Lean Engineering. The term “lean engineering” was created by Japanese manufacturers. The high efficiency of this method resulted in a meaningful growth in concern in the philosophy of Lean among European companies, and consequently the use of its European markets. Lean philosophy is an approach to manufacturing to minimize the use of all resources, including time. These are resources that are used in the company for a variety of activities. This implies, first identify and then eliminate activities which does not generate added value in the field of design, manufacturing, supply chain management, and customer relations. The producers of these principles not only employ teams multi-professional employees at all levels of the organization, but also use a more automated machines to produce large quantities of products with a high degree of diversity. Lean Engineering is to use a number of principles and practical guidelines that allow you to reduce costs by eliminating absolute extravagance, and also simplification of all manufacturing processes and maintenance. Nowadays it could be applied the powerful engineering programs to realize the concept of Lean Engineering. They could be described using the term CAD/CAM/CAE. They consist of completely different packages for both the design of elements, as well process design. Their common feature is generally considered with their application area. They are used for computer programs assisting the design, development and manufacturing phases of a manufacturing process. The idea of the presented work is to use the Siemens NX software for aiding the process of Lean Engineering system creating. The investigated system is a robotized workcell. In the NX system are created the components of the designed workcell such as machine tools, as industrial robot, as conveyors and buffers. The system let to functionally link these components to

  9. Towards a new generation of agricultural system data, models and knowledge products

    NARCIS (Netherlands)

    Janssen, Sander J.C.; Porter, Cheryl H.; Moore, Andrew D.; Athanasiadis, Ioannis N.; Foster, Ian; Jones, James W.; Antle, John M.

    2017-01-01

    Agricultural modeling has long suffered from fragmentation in model implementation. Many models are developed, there is much redundancy, models are often poorly coupled, model component re-use is rare, and it is frequently difficult to apply models to generate real solutions for the agricultural

  10. Development of Production Systems

    DEFF Research Database (Denmark)

    Christiansen, Thomas Bøhm

    1997-01-01

    This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

  11. Simulated Leaching (Migration) Study for a Model Container-Closure System Applicable to Parenteral and Ophthalmic Drug Products.

    Science.gov (United States)

    Jenke, Dennis; Egert, Thomas; Hendricker, Alan; Castner, James; Feinberg, Tom; Houston, Christopher; Hunt, Desmond G; Lynch, Michael; Nicholas, Kumudini; Norwood, Daniel L; Paskiet, Diane; Ruberto, Michael; Smith, Edward J; Holcomb, Frank; Markovic, Ingrid

    2017-01-01

    A simulating leaching (migration) study was performed on a model container-closure system relevant to parenteral and ophthalmic drug products. This container-closure system consisted of a linear low-density polyethylene bottle (primary container), a polypropylene cap and an elastomeric cap liner (closure), an adhesive label (labeling), and a foil overpouch (secondary container). The bottles were filled with simulating solvents (aqueous salt/acid mixture at pH 2.5, aqueous buffer at pH 9.5, and 1/1 v/v isopropanol/water), a label was affixed to the filled and capped bottles, the filled bottles were placed into the foil overpouch, and the filled and pouched units were stored either upright or inverted for up to 6 months at 40 °C. After storage, the leaching solutions were tested for leached substances using multiple complementary analytical techniques to address volatile, semi-volatile, and non-volatile organic and inorganic extractables as potential leachables.The leaching data generated supported several conclusions, including that (1) the extractables (leachables) profile revealed by a simulating leaching study can qualitatively be correlated with compositional information for materials of construction, (2) the chemical nature of both the extracting medium and the individual extractables (leachables) can markedly affect the resulting profile, and (3) while direct contact between a drug product and a system's material of construction may exacerbate the leaching of substances from that material by the drug product, direct contact is not a prerequisite for migration and leaching to occur. LAY ABSTRACT: The migration of container-related extractables from a model pharmaceutical container-closure system and into simulated drug product solutions was studied, focusing on circumstances relevant to parenteral and ophthalmic drug products. The model system was constructed specifically to address the migration of extractables from labels applied to the outside of the

  12. Waste management facilities cost information: System cost model product description. Revision 2

    International Nuclear Information System (INIS)

    Lundeen, A.S.; Hsu, K.M.; Shropshire, D.E.

    1996-02-01

    In May of 1994, Lockheed Idaho Technologies Company (LITCO) in Idaho Falls, Idaho and subcontractors developed the System Cost Model (SCM) application. The SCM estimates life-cycle costs of the entire US Department of Energy (DOE) complex for designing; constructing; operating; and decommissioning treatment, storage, and disposal (TSD) facilities for mixed low-level, low-level, transuranic, and mixed transuranic waste. The SCM uses parametric cost functions to estimate life-cycle costs for various treatment, storage, and disposal modules which reflect planned and existing facilities at DOE installations. In addition, SCM can model new facilities based on capacity needs over the program life cycle. The SCM also provides transportation costs for DOE wastes. Transportation costs are provided for truck and rail and include transport of contact-handled, remote-handled, and alpha (transuranic) wastes. The user can provide input data (default data is included in the SCM) including the volume and nature of waste to be managed, the time period over which the waste is to be managed, and the configuration of the waste management complex (i.e., where each installation's generated waste will be treated, stored, and disposed). Then the SCM uses parametric cost equations to estimate the costs of pre-operations (designing), construction costs, operation management, and decommissioning these waste management facilities

  13. Antioxidant and chelating capacity of Maillard reaction products in amino acid-sugar model systems: applications for food processing.

    Science.gov (United States)

    Mondaca-Navarro, Blanca A; Ávila-Villa, Luz A; González-Córdova, Aarón F; López-Cervantes, Jaime; Sánchez-Machado, Dalia I; Campas-Baypoli, Olga N; Rodríguez-Ramírez, Roberto

    2017-08-01

    Maillard reaction products (MRP) have gained increasing interest owing to their both positive and negative effects on human health. Aqueous amino acid-sugar model systems were studied in order to evaluate the antioxidant and chelating activity of MRP under conditions similar to those of food processing. Amino acids (cysteine, glycine, isoleucine and lysine) combined with different sugars (fructose or glucose) were heated to 100 and 130 °C for 30, 60 and 90 min. Antioxidant capacity was evaluated via ABTS and DPPH free radical scavenging assays, in addition to Fe 2+ and Cu 2+ ion chelating capacity. In the ABTS assay, the cysteine-fructose model system presented the highest antioxidant activity at 7.05 µmol mL -1 (130 °C, 60 min), expressed in Trolox equivalents. In the DPPH assay, the cysteine-glucose system presented the highest antioxidant activity at 3.79 µmol mL -1 (100 °C, 90 min). The maximum rate of chelation of Fe 2+ and Cu 2+ was 96.31 and 59.44% respectively in the lysine-fructose and cysteine-glucose systems (100 °C, 30 min). The model systems presented antioxidant and chelating activity under the analyzed temperatures and heating times, which are similar to the processing conditions of some foods. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  14. Modelling the metabolic characteristics of proteins in dairy cattle from co-products of bioethanol processing: comparison of the NRC 2001 model with the DVE/OEB system.

    Science.gov (United States)

    Nuez-Ortín, Waldo G; Yu, Peiqiang

    2011-02-01

    Co-products from bioethanol processing include wheat dried distillers grains with solubles (DDGS), corn DDGS, blend DDGS (e.g. wheat/corn at 70:30, 60:40 or 50:50 w/w), triticale DDGS, barley DDGS and pea DDGS. The objective of this study was to compare two systems, the DVE/OEB system versus the NRC 2001 model, in modelling the metabolic characteristics of proteins in dairy cattle from different types of co-products (DDGS) from different bioethanol processing plants. The predicted values from the NRC 2001 model were 10% higher (P 0.05). The sensitivity of the two models in detecting differences among DDGS types and between bioethanol plants was similar. The two models coincided in the superior protein value of blend DDGS as well as in the more optimal degraded protein balance (DPB) for corn DDGS. Although the differences between the DVE/OEB system and the NRC 2001 model were significant (P < 0.05) for most outputs owing to differences in some of the concepts and factors used in modelling, the correlations between total truly absorbed protein (DVE) and metabolisable protein (MP) values and between degraded protein balances (DPB(OEB) vs DPB(NRC) ) were also significant (P < 0.05). 2010 Society of Chemical Industry.

  15. Production Systems. Laboratory Activities.

    Science.gov (United States)

    Gallaway, Ann, Ed.

    This production systems guide provides teachers with learning activities for secondary students. Introductory materials include an instructional planning outline and worksheet, an outline of essential elements, domains and objectives, a course description, and a content outline. The guide contains 30 modules on the following topics: production…

  16. Independence and Product Systems

    OpenAIRE

    Skeide, Michael

    2003-01-01

    Starting from elementary considerations about independence and Markov processes in classical probability we arrive at the new concept of conditional monotone independence (or operator-valued monotone independence). With the help of product systems of Hilbert modules we show that monotone conditional independence arises naturally in dilation theory.

  17. Application of integrated production and economic models to estimate the impact of Schmallenberg virus for various beef suckler production systems in France and the United Kingdom.

    Science.gov (United States)

    Raboisson, Didier; Waret-Szkuta, Agnès; Rushton, Jonathan; Häsler, Barbara; Alarcon, Pablo

    2014-10-26

    Schmallenberg virus (SBV) was first detected in November 2011 in Germany and then rapidly spread throughout Europe. In beef suckler farms, clinical signs are mainly associated with reproductive disorders, particularly in late gestation, and intransient and non-specific symptoms, namely diarrhea, inappetence and fever. The objectives of this study were to develop models that simulate the production of different beef suckler systems in the United Kingdom (UK) and France and to use these models to estimate, through partial budget analyses, the farm-level economic cost of SBV under two disease impact scenarios, namely high and low impact. The probability for a farm to be in the high or low scenario depends, among other, on the high, low or nil vectorial activity for a given period and location and on the period(s) of sensitivity of the animals to the disease. Under the high impact scenario, the estimated SBV impact ranged from 26€ to 43€ per cow per year in France and from 29€ to 36€ per cow per year in the UK. It was approximately half of this amount in the low impact scenario. These financial impacts represent 5 to 16% of the gross margin, depending on the country, impact scenario and livestock system considered. Most of the SBV impact originates from the costs of the steers and heifers not produced. Differences identified between the systems studied mainly stem from differences among the value of the steers or heifers sold: SBV impact is higher for British autumn calving systems compared to spring calving, and for French farms with calving and fattening activities compared to farms with only a single, annual calving activity. This study shows the usefulness of integrated production and economic models to accurately evaluate the costs of diseases and understand which factors have major impacts in the different systems. The models stand as a useful basis for animal health professionals when considering alternative disease control measures. They are also a farm

  18. Examining the impacts of increased corn production on groundwater quality using a coupled modeling system

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset was used to create graphics associated with manuscript: Garcia et al., Examining the impacts of increased corn production on groundwater quality using a...

  19. The role of mycelium production and a MAPK-mediated immune response in the C. elegans-Fusarium model system

    Science.gov (United States)

    Muhammed, Maged; Fuchs, Beth Burgwyn; WU, Michael P.; Breger, Julia; Coleman, Jeffrey J.; Mylonakis, Eleftherios

    2013-01-01

    Fusariosis is an emerging infectious complication of immune deficiency, but models to study this infection are lacking. The use of the soil nematode Caenorhabditis elegans as a model host to study the pathogenesis of Fusarium spp. was investigated. We observed that Fusarium conidia consumed by C. elegans can cause a lethal infection and result in more than 90% killing of the host within 120 hours, and the nematode had a significantly longer survival when challenged with Fusarium proliferatum compared to other species. Interestingly, mycelium production appears to be a major contributor in nematode killing in this model system, and C. elegans mutant strains with the immune response genes, tir-1 (encoding a protein containing a TIR domain that functions upstream of PMK-1) and pmk-1 (the homolog of the mammalian p38 MAPK) lived significantly shorter when challenged with Fusarium compared to the wild type strain. Furthermore, we used the C. elegans model to assess the efficacy and toxicity of various compounds against Fusarium. We demonstrated that amphotericin B, voriconazole, mancozeb, and phenyl mercury acetate significantly prolonged the survival of Fusarium-infected C. elegans, although mancozeb was toxic at higher concentrations. In conclusion, we describe a new model system for the study of Fusarium pathogenesis and evolutionarily preserved host responses to this important fungal pathogen. PMID:22225407

  20. Feasibility of waste to Bio-diesel production via Nuclear-Biomass hybrid model. System dynamics analysis

    International Nuclear Information System (INIS)

    Nam, Hoseok; Kasada, Ryuta; Konishi, Satoshi

    2017-01-01

    Nuclear-Biomass hybrid system which takes waste biomass from municipal, agricultural area, and forest as feedstock produces Bio-diesel fuel from synthesis gas generated by endothermic pyrolytic gasification using high temperature nuclear heat. Over 900 degree Celsius of exterior thermal heat from nuclear reactors, Very High Temperature Reactor (VHTR) and some other heat sources, bring about waste biomass gasification to produce maximum amount of chemical energy from feedstock. Hydrogen from Biomass gasification or Bio-diesel as the product of Fischer-Tropsch reaction following it provide fuels for transport sector. Nuclear-Biomass hybrid system is a new alternatives to produce more energy generating synergy effects by efficiently utilizing the high temperature heat from nuclear reactor that might be considerably wasted by thermal cycle, and also energy loss from biomass combustion or biochemical processes. System Dynamics approach is taken to analyze low-carbon synthesis fuel, Bio-diesel, production with combination of carbon monoxide and hydrogen from biomass gasification. Feedstock cost considering collection, transportation, storage and facility for biomass gasification impacts the economic feasibility of this model. This paper provides the implication of practical nuclear-biomass hybrid system application with feedstock supply chain through evaluation of economic feasibility. (author)

  1. Product Knowledge Modelling and Management

    DEFF Research Database (Denmark)

    Zhang, Y.; MacCallum, K. J.; Duffy, Alex

    1996-01-01

    .A scheme is presented in this paper to model, i.e. classify, structure and formalise the product knowledge for the purpose of supporting function-oriented design. The product design specification and four types of required attributes of a specific product have been identified to form the Specific Product......The term, Product Knowledge is used to refer to two related but distinct concepts; the knowledge of a specific product (Specific Product Knowledge) and the knowledge of a product domain (Product Domain Knowledge). Modelling and managing Product Knowlege is an essential part of carrying out design...... Knowledge involved in the product generation process and therefore modelled in a PDS unit and four viewpoint models. Further, product domain knowledge model consists of four types of basic product domain knowledge and product family knowledge. They are considered as necessary and sufficient to support...

  2. Multi crop model climate risk country-level management design: case study on the Tanzanian maize production system

    Science.gov (United States)

    Chavez, E.

    2015-12-01

    Future climate projections indicate that a very serious consequence of post-industrial anthropogenic global warming is the likelihood of the greater frequency and intensity of extreme hydrometeorological events such as heat waves, droughts, storms, and floods. The design of national and international policies targeted at building more resilient and environmentally sustainable food systems needs to rely on access to robust and reliable data which is largely absent. In this context, the improvement of the modelling of current and future agricultural production losses using the unifying language of risk is paramount. In this study, we use a methodology that allows the integration of the current understanding of the various interacting systems of climate, agro-environment, crops, and the economy to determine short to long-term risk estimates of crop production loss, in different environmental, climate, and adaptation scenarios. This methodology is applied to Tanzania to assess optimum risk reduction and maize production increase paths in different climate scenarios. The simulations carried out use inputs from three different crop models (DSSAT, APSIM, WRSI) run in different technological scenarios and thus allowing to estimate crop model-driven risk exposure estimation bias. The results obtained also allow distinguishing different region-specific optimum climate risk reduction policies subject to historical as well as RCP2.5 and RCP8.5 climate scenarios. The region-specific risk profiles obtained provide a simple framework to determine cost-effective risk management policies for Tanzania and allow to optimally combine investments in risk reduction and risk transfer.

  3. An Integrated Modeling System for Estimating Glacier and Snow Melt Driven Streamflow from Remote Sensing and Earth System Data Products in the Himalayas

    Science.gov (United States)

    Brown, M. E.; Racoviteanu, A. E.; Tarboton, D. G.; Sen Gupta, A.; Nigro, J.; Policelli, F.; Habib, S.; Tokay, M.; Shrestha, M. S.; Bajracharya, S.

    2014-01-01

    Quantification of the contribution of the hydrologic components (snow, ice and rain) to river discharge in the Hindu Kush Himalayan (HKH) region is important for decision-making in water sensitive sectors, and for water resources management and flood risk reduction. In this area, access to and monitoring of the glaciers and their melt outflow is challenging due to difficult access, thus modeling based on remote sensing offers the potential for providing information to improve water resources management and decision making. This paper describes an integrated modeling system developed using downscaled NASA satellite based and earth system data products coupled with in-situ hydrologic data to assess the contribution of snow and glaciers to the flows of the rivers in the HKH region. Snow and glacier melt was estimated using the Utah Energy Balance (UEB) model, further enhanced to accommodate glacier ice melt over clean and debris-covered tongues, then meltwater was input into the USGS Geospatial Stream Flow Model (Geo- SFM). The two model components were integrated into Better Assessment Science Integrating point and Nonpoint Sources modeling framework (BASINS) as a user-friendly open source system and was made available to countries in high Asia. Here we present a case study from the Langtang Khola watershed in the monsoon-influenced Nepal Himalaya, used to validate our energy balance approach and to test the applicability of our modeling system. The snow and glacier melt model predicts that for the eight years used for model evaluation (October 2003-September 2010), the total surface water input over the basin was 9.43 m, originating as 62% from glacier melt, 30% from snowmelt and 8% from rainfall. Measured streamflow for those years were 5.02 m, reflecting a runoff coefficient of 0.53. GeoSFM simulated streamflow was 5.31 m indicating reasonable correspondence between measured and model confirming the capability of the integrated system to provide a quantification

  4. Advanced Production Planning Models

    Energy Technology Data Exchange (ETDEWEB)

    JONES,DEAN A.; LAWTON,CRAIG R.; KJELDGAARD,EDWIN A.; WRIGHT,STEPHEN TROY; TURNQUIST,MARK A.; NOZICK,LINDA K.; LIST,GEORGE F.

    2000-12-01

    >This report describes the innovative modeling approach developed as a result of a 3-year Laboratory Directed Research and Development project. The overall goal of this project was to provide an effective suite of solvers for advanced production planning at facilities in the nuclear weapons complex (NWC). We focused our development activities on problems related to operations at the DOE's Pantex Plant. These types of scheduling problems appear in many contexts other than Pantex--both within the NWC (e.g., Neutron Generators) and in other commercial manufacturing settings. We successfully developed an innovative and effective solution strategy for these types of problems. We have tested this approach on actual data from Pantex, and from Org. 14000 (Neutron Generator production). This report focuses on the mathematical representation of the modeling approach and presents three representative studies using Pantex data. Results associated with the Neutron Generator facility will be published in a subsequent SAND report. The approach to task-based scheduling described here represents a significant addition to the literature for large-scale, realistic scheduling problems in a variety of production settings.

  5. Absorbing Markov Chain Models to Determine Optimum Process Target Levels in Production Systems with Dual Correlated Quality Characteristics

    Directory of Open Access Journals (Sweden)

    Mohammad Saber Fallah Nezhad

    2012-03-01

    Full Text Available For a manufacturing organization to compete effectively in the global marketplace, cutting costs and improving overall efficiency is essential.  A single-stage production system with two independent quality characteristics and different costs associated with each quality characteristic that falls below a lower specification limit (scrap or above an upper specification limit (rework is presented in this paper. The amount of reworks and scraps are assumed to be depending on the process parameters such as process mean and standard deviation thus the expected total profit is significantly dependent on the process parameters. This paper develops a Markovian decision making model for determining the process means. Sensitivity analyzes is performed to validate, and a numerical example is given to illustrate the proposed model. The results showed that the optimal process means extremely effects on the quality characteristics’ parameters.

  6. Multi-disciplinary engineering for cyber-physical production systems data models and software solutions for handling complex engineering projects

    CERN Document Server

    Lüder, Arndt; Gerhard, Detlef

    2017-01-01

    This book discusses challenges and solutions for the required information processing and management within the context of multi-disciplinary engineering of production systems. The authors consider methods, architectures, and technologies applicable in use cases according to the viewpoints of product engineering and production system engineering, and regarding the triangle of (1) product to be produced by a (2) production process executed on (3) a production system resource. With this book industrial production systems engineering researchers will get a better understanding of the challenges and requirements of multi-disciplinary engineering that will guide them in future research and development activities. Engineers and managers from engineering domains will be able to get a better understanding of the benefits and limitations of applicable methods, architectures, and technologies for selected use cases. IT researchers will be enabled to identify research issues related to the development of new methods, arc...

  7. Diagnostic Evaluation of Ozone Production and Horizontal Transport in a Regional Photochemical Air Quality Modeling System

    Science.gov (United States)

    A diagnostic model evaluation effort has been performed to focus on photochemical ozone formation and the horizontal transport process since they strongly impact the temporal evolution and spatial distribution of ozone (O3) within the lower troposphere. Results from th...

  8. Production of fuel range oxygenates by supercritical hydrothermal liquefaction of lignocellulosic model systems

    DEFF Research Database (Denmark)

    Pedersen, Thomas Helmer; Rosendahl, Lasse Aistrup

    2015-01-01

    Lignocellulosic model compounds and aspen wood are processed at supercritical hydrothermal conditions to study and understand feedstock impact on biocrude formation and characteristics. Glucose and xylose demonstrate similar yield of biocrude and biochar, similar biocrude characteristics, and it ......Lignocellulosic model compounds and aspen wood are processed at supercritical hydrothermal conditions to study and understand feedstock impact on biocrude formation and characteristics. Glucose and xylose demonstrate similar yield of biocrude and biochar, similar biocrude characteristics...

  9. Radical production in biological systems

    International Nuclear Information System (INIS)

    Johnson, J.R.; Akabani, G.

    1994-10-01

    This paper describes our effort to develop a metric for radiation exposure that is more fundamental than adsorbed dose and upon which a metric for exposure to chemicals could be based. This metric is based on the production of radicals by the two agents. Radicals produced by radiation in biological systems commonly assumed to be the same as those produced in water despite the presence of a variety of complex molecules. This may explain why the extensive efforts to describe the relationship between energy deposition (track structure) and molecular damage to DNA, based on the spectrum of radicals produced, have not been successful in explaining simple biological effects such as cell killing. Current models assume that DNA and its basic elements are immersed in water-like media and only model the production and diffusion of water-based radicals and their interaction with DNA structures; these models lack the cross sections associated with each macro-component of DNA and only treat water-based radicals. It has been found that such models are not realistic because DNA is not immersed in pure water. A computer code capable of simulating electron tracks, low-energy electrons, energy deposition in small molecules, and radical production and diffusion in water like media has been developed. This code is still in at a primitive stage and development is continuing. It is being used to study radical production by radiation, and radical diffusion and interactions in simple molecular systems following their production. We are extending the code to radical production by chemicals to complement our PBPK modeling efforts. It therefore has been developed primarily for use with radionuclides that are in biological materials, and not for radiation fields

  10. Integrating the production functions of Liebig, Michaelis-Menten, Mitscherlich and Liebscher into one system dynamics model

    NARCIS (Netherlands)

    Nijland, G.O.; Schouls, J.; Goudriaan, J.

    2008-01-01

    Any agricultural production process is characterized by input¿output relations. In this paper we show that the production functions of Liebig, Mitscherlich and Liebscher for the relation between nutrient supply and crop production can be regarded as special variants of one 'integrated model'. The

  11. A procedure for Building Product Models

    DEFF Research Database (Denmark)

    Hvam, Lars

    1999-01-01

    activities. A basic assumption is that engineers have to take the responsability for building product models to be used in their domain. To do that they must be able to carry out the modeling task on their own without any need for support from computer science experts. This paper presents a set of simple......The application of product modeling in manufacturing companies raises the important question of how to model product knowledge in a comprehensible and efficient way. An important challenge is to qualify engineers to model and specify IT-systems (product models) to support their specification......, easily adaptable concepts and methods from data modeling (object oriented analysis) and domain modeling (product modeling). The concepts are general and can be used for modeling all types of specifications in the different phases in the product life cycle. The modeling techniques presented have been...

  12. Framework for product knowledge and product related knowledge which supports product modelling for mass customization

    DEFF Research Database (Denmark)

    Riis, Jesper; Hansen, Benjamin Loer; Hvam, Lars

    2003-01-01

    and personalization. The framework for product knowledge and product related knowledge is based on the following theories: axiomatic design, technical systems, theory of domains, theory of structuring, theory of properties and the framework for the content of product and product related models. The framework is built...... and product related knowledge which should be or should not be included in the model. This demarcation will have a large influence on the structure of the IT systems (for example the configurator system, the CAD system or the PDM system). • The use of the framework can help achieve more structured models......The article presents a framework for product knowledge and product related knowledge which can be used to support the product modelling process which is needed for developing IT systems. These IT systems are important tools for many companies when they aim at achieving mass customization...

  13. Small oilfield integrated production management model

    Directory of Open Access Journals (Sweden)

    Danilović Dušan

    2016-01-01

    Full Text Available In this paper is presented the concept of integrated oil production management model. The model's main objective is to provide more efficient tool for oil production process management in terms of the technological and economical aspects. Integrated oil production management model implies multidisciplinary approach which connects oil reservoir development and production with application of risk analysis. Model's task is to simulate behavior of the whole production system, enabling overcoming the weaknesses of conventional deterministic analysis and significantly enhancing oil production, as well as an investment decision making. In the article is presented shortly the application of integrated oil production management model at the oilfield 'K'. The ultimate goal was techno-economic analysis of managing production process, i.e. determination of production economic limit based on production history data, decline analysis and operating costs.

  14. Policy-Relevant Systematic Reviews to Strengthen Health Systems: Models and Mechanisms to Support Their Production

    Science.gov (United States)

    Oliver, Sandra; Dickson, Kelly

    2016-01-01

    Support for producing systematic reviews about health systems is less well developed than for those about clinical practice. From interviewing policy makers and systematic reviewers we identified institutional mechanisms which bring systematic reviews and policy priorities closer by harnessing organisational and individual motivations, emphasising…

  15. HIGH PRODUCTIVITY VACUUM BLASTING SYSTEM

    International Nuclear Information System (INIS)

    McPhee, William S.

    1999-01-01

    The objective of this project is to improve the productivity and lower the expense of existing vacuum blasting technology. This technology is used to remove radioactive contamination, PCBs, and lead-based paint and provides worker protection by continuously recycling the material and dust for the decontamination tasks. The proposed work would increase the cleaning rate and provide safe and cost-effective decontamination of the DOE sites. This work focuses on redesigning and improving existing vacuum blasting technology including blast head nozzles, ergonomic handling of the blast head by reducing its weight; brush-ring design, vacuum level regulator, efficiency of the dust separator, and operational control sensors. The redesign is expected to enhance the productivity and economy of the vacuum blasting system by at least 50% over current vacuum blasting systems. There are three phases in the project. Phase I consists of developing and testing mathematical models. Phase II consists of pre-prototype design and fabrication and pre-prototype unit testing. Phase III consists of prototype design and field verification testing. In phase I, mathematical models are developed and analyzed for the nozzle, blast head, wind curtain, and dust separator, first as individual devices and then combined as an integrated model. This allows study of respective airflow and design parameters. The Contractor shall, based on the results of the mathematical modeling studies, design experimental models of the components and test these models. In addition, the Contractor shall develop sensors to detect the relationship of the blast head to the blast surfaces and controls to minimize the dependency on an operator's skill and judgment to obtain optimum positioning, as well as real-time characterization sensors to determine as the blast head is moving the depth to which coatings must be removed, thereby improving production and minimizing waste. In phase II, the Contractor shall design and

  16. Pesticide Product Information System (PPIS)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Pesticide Product Information System contains information concerning all pesticide products registered in the United States. It includes registrant name and...

  17. Globalisation, Productive Systems, and Inequalities

    OpenAIRE

    Gilles Duranton

    1998-01-01

    Using the idea that the division of labor is limited not only by the extent of the market but also by its heterogeneity, it is proposed in this paper that ''globalisation'' is redrawing the lines of division within and between countries. Our model builds on the concept of productive systems. Our results indicate that progressive trade integration among ''similar'' countries lead first to disparities between countries and then to convergence between nations but also to inequalities within nati...

  18. Formal Information Model for Representing Production Resources

    OpenAIRE

    Siltala, Niko; Järvenpää, Eeva; Lanz, Minna

    2017-01-01

    Part 2: Intelligent Manufacturing Systems; International audience; This paper introduces a concept and associated descriptions to formally describe physical production resources for modular and reconfigurable production systems. These descriptions are source of formal information for (automatic) production system design and (re-)configuration. They can be further utilized during the system deployment and execution. The proposed concept and the underlying formal resource description model is c...

  19. MODEL SYSTEM EVALUATIONS OF MEAT EMULSIONS PREPARED WITH DIFFERENT EDIBLE BEEF BY PRODUCTS AND FATS AND OIL

    Directory of Open Access Journals (Sweden)

    Mustafa KARAKAYA

    1997-02-01

    Full Text Available Emulsion parameters of different meat by-products (beef head-meat, beef heart and liver and animal fats and oil (beef fat, mutton fat, sheep tail-fat and corn oil were studied in a model system. The results of the study showed that the highest emulsion capacity (EC was with the heart meat and beef fat emulsion while the lowest EC was measured in the beef head-meat and sheep tail-fat combination. Corn oil gave the best emulsification with beef head-meat and liver, and beef fat resulted the second best results. Beef head-meat gave the most stable emulsion with all fats, but the emulsions prepared with heart and liver were generally unstable.

  20. In vitro antioxidant and cytoprotective properties of Maillard reaction products from phloridzin-amino acid model systems.

    Science.gov (United States)

    Han, Linna; Li, Feng; Yu, Qijian; Li, Dapeng

    2018-01-01

    The aim of this study was to investigate in vitro antioxidant activities and cytoprotective effect of Maillard reaction products (MRPs) from phloridzin (Pz)-amino acid model systems. Their structures were also characterised by Fourier transform-infrared spectroscopy (FTIR). MRPs were prepared from the Pz-methionine (Met), Pz-lysine (Lys), Pz-isoleucine (Ile), Pz-histidine (His) or Pz-glutamic acid (Glu) model system. The Pz-Lys MRPs, rich in antioxidant potency, were subjected to ultrafiltration to yield four MRPs fractions with different molecular weights (Mw). The fraction with Mw 30-50 kDa had significantly (P Maillard reaction. The results obtained in this study may provide some basis for the purported health-promoting effects of MRPs and their potential application as antioxidant agents in food industry. Also, it is important for our understanding of the variation of bioactive substances in food during thermal processing. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  1. Models for estimation of the presence of non-regulated disinfection by-products in small drinking water systems.

    Science.gov (United States)

    Guilherme, Stéphanie; Rodriguez, Manuel J

    2017-10-23

    Among all the organic disinfection by-products (DBPs), only trihalomethanes (THMs) and haloacetic acids (HAAs) are regulated in drinking water, while most DBPs are not. Very little information exists on the occurrence of non-regulated DBPs, particularly in small water systems (SWS). Paradoxically, SWS are more vulnerable to DBPs because of a low capacity to implement adequate treatment technologies to remove DBP precursors. Since DBP analyses are expensive, usually SWS have difficulties to implement a rigorous characterization of these contaminants. The purpose of this study was to estimate non-regulated DBP levels in SWS from easy measurements of relevant parameters regularly monitored. Since no information on non-regulated DBPs in SWS was available, a sampling program was carried out in 25 SWS in two provinces of Canada. Five DBP families were investigated: THMs, HAAs, haloacetonitriles (HANs), halonitromethanes (HNMs), and haloketones (HKs). Multivariate linear mixed regression models were developed to estimate HAN, HK, and HNM levels from water quality characteristics in the water treatment plant, concentrations of regulated DBPs, and residual disinfectant levels. The models obtained have a good explanatory capacity since R 2 varies from 0.77 to 0.91 according to compounds and conditions for application (season and type of treatment). Model validation with an independent database suggested their ability for generalization in similar SWS in North America.

  2. Damage of polyesters by the atmospheric free radical oxidant NO3•: a product study involving model systems

    Directory of Open Access Journals (Sweden)

    Catrin Goeschen

    2013-09-01

    Full Text Available Manufactured polymer materials are used in increasingly demanding applications, but their lifetime is strongly influenced by environmental conditions. In particular, weathering and ageing leads to dramatic changes in the properties of the polymers, which results in decreased service life and limited usage. Despite the heavy reliance of our society on polymers, the mechanism of their degradation upon exposure to environmental oxidants is barely understood. In this work, model systems of important structural motifs in commercial high-performing polyesters were used to study the reaction with the night-time free radical oxidant NO3• in the absence and presence of other radical and non-radical oxidants. Identification of the products revealed ‘hot spots’ in polyesters that are particularly vulnerable to attack by NO3• and insight into the mechanism of oxidative damage by this environmentally important radical. It is suggested that both intermediates as well as products of these reactions are potentially capable of promoting further degradation processes in polyesters under environmental conditions.

  3. A procedure for building product models

    DEFF Research Database (Denmark)

    Hvam, Lars; Riis, Jesper; Malis, Martin

    2001-01-01

    This article presents a procedure for building product models to support the specification processes dealing with sales, design of product variants and production preparation. The procedure includes, as the first phase, an analysis and redesign of the business processes, which are to be supported...... with product models. The next phase includes an analysis of the product assortment, and the set up of a so-called product master. Finally the product model is designed and implemented using object oriented modelling. The procedure is developed in order to ensure that the product models constructed are fit...... for the business processes they support, and properly structured and documented, in order to facilitate that the systems can be maintained continually and further developed. The research has been carried out at the Centre for Industrialisation of Engineering, Department of Manufacturing Engineering, Technical...

  4. Production monitoring system for understanding product robustness

    DEFF Research Database (Denmark)

    Boorla, Srinivasa Murthy; Howard, Thomas J.

    2016-01-01

    study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality...... to be seven days. Using the monitoring system for the PRECI‐IN case, similar corrective action would have been achieved almost immediately.......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...

  5. Amplification of global warming through pH dependence of DMS production simulated with a fully coupled Earth system model

    Science.gov (United States)

    Schwinger, Jörg; Tjiputra, Jerry; Goris, Nadine; Six, Katharina D.; Kirkevåg, Alf; Seland, Øyvind; Heinze, Christoph; Ilyina, Tatiana

    2017-08-01

    We estimate the additional transient surface warming ΔTs caused by a potential reduction of marine dimethyl sulfide (DMS) production due to ocean acidification under the high-emission scenario RCP8.5 until the year 2200. Since we use a fully coupled Earth system model, our results include a range of feedbacks, such as the response of marine DMS production to the additional changes in temperature and sea ice cover. Our results are broadly consistent with the findings of a previous study that employed an offline model set-up. Assuming a medium (strong) sensitivity of DMS production to pH, we find an additional transient global warming of 0.30 K (0.47 K) towards the end of the 22nd century when DMS emissions are reduced by 7.3 Tg S yr-1 or 31 % (11.5 Tg S yr-1 or 48 %). The main mechanism behind the additional warming is a reduction of cloud albedo, but a change in shortwave radiative fluxes under clear-sky conditions due to reduced sulfate aerosol load also contributes significantly. We find an approximately linear relationship between reduction of DMS emissions and changes in top of the atmosphere radiative fluxes as well as changes in surface temperature for the range of DMS emissions considered here. For example, global average Ts changes by -0. 041 K per 1 Tg S yr-1 change in sea-air DMS fluxes. The additional warming in our model has a pronounced asymmetry between northern and southern high latitudes. It is largest over the Antarctic continent, where the additional temperature increase of 0.56 K (0.89 K) is almost twice the global average. We find that feedbacks are small on the global scale due to opposing regional contributions. The most pronounced feedback is found for the Southern Ocean, where we estimate that the additional climate change enhances sea-air DMS fluxes by about 9 % (15 %), which counteracts the reduction due to ocean acidification.

  6. Amplification of global warming through pH dependence of DMS production simulated with a fully coupled Earth system model

    Directory of Open Access Journals (Sweden)

    J. Schwinger

    2017-08-01

    Full Text Available We estimate the additional transient surface warming ΔTs caused by a potential reduction of marine dimethyl sulfide (DMS production due to ocean acidification under the high-emission scenario RCP8.5 until the year 2200. Since we use a fully coupled Earth system model, our results include a range of feedbacks, such as the response of marine DMS production to the additional changes in temperature and sea ice cover. Our results are broadly consistent with the findings of a previous study that employed an offline model set-up. Assuming a medium (strong sensitivity of DMS production to pH, we find an additional transient global warming of 0.30 K (0.47 K towards the end of the 22nd century when DMS emissions are reduced by 7.3 Tg S yr−1 or 31 % (11.5 Tg S yr−1 or 48 %. The main mechanism behind the additional warming is a reduction of cloud albedo, but a change in shortwave radiative fluxes under clear-sky conditions due to reduced sulfate aerosol load also contributes significantly. We find an approximately linear relationship between reduction of DMS emissions and changes in top of the atmosphere radiative fluxes as well as changes in surface temperature for the range of DMS emissions considered here. For example, global average Ts changes by −0. 041 K per 1 Tg S yr−1 change in sea–air DMS fluxes. The additional warming in our model has a pronounced asymmetry between northern and southern high latitudes. It is largest over the Antarctic continent, where the additional temperature increase of 0.56 K (0.89 K is almost twice the global average. We find that feedbacks are small on the global scale due to opposing regional contributions. The most pronounced feedback is found for the Southern Ocean, where we estimate that the additional climate change enhances sea–air DMS fluxes by about 9 % (15 %, which counteracts the reduction due to ocean acidification.

  7. The oleic acid-ozone heterogeneous reaction system: products, kinetics, secondary chemistry, and atmospheric implications of a model system – a review

    Directory of Open Access Journals (Sweden)

    J. Zahardis

    2007-01-01

    Full Text Available The heterogeneous processing of organic aerosols by trace oxidants has many implications to atmospheric chemistry and climate regulation. This review covers a model heterogeneous reaction system (HRS: the oleic acid-ozone HRS and other reaction systems featuring fatty acids, and their derivatives. The analysis of the commonly observed aldehyde and organic acid products of ozonolysis (azelaic acid, nonanoic acid, 9-oxononanoic acid, nonanal is described. The relative product yields are noted and explained by the observation of secondary chemical reactions. The secondary reaction products arising from reactive Criegee intermediates are mainly peroxidic, notably secondary ozonides and α-acyloxyalkyl hydroperoxide oligomers and polymers, and their formation is in accord with solution and liquid-phase ozonolysis. These highly oxygenated products are of low volatility and hydrophilic which may enhance the ability of particles to act as cloud condensation nuclei (CCN. The kinetic description of this HRS is critically reviewed. Most kinetic studies suggest this oxidative processing is either a near surface reaction that is limited by the diffusion of ozone or a surface based reaction. Internally mixed particles and coatings represent the next stage in the progression towards more realistic proxies of tropospheric organic aerosols and a description of the products and the kinetics resulting from the ozonolysis of these proxies, which are based on fatty acids or their derivatives, is presented. Finally, the main atmospheric implications of oxidative processing of particulate containing fatty acids are presented. These implications include the extended lifetime of unsaturated species in the troposphere facilitated by the presence of solids, semi-solids or viscous phases, and an enhanced rate of ozone uptake by particulate unsaturates compared to corresponding gas-phase organics. Ozonolysis of oleic acid enhances its CCN activity, which implies that

  8. Modelling and using product architectures in mechatronic product development

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik

    The objective for the paper is to determine the role of a product architecture modelling tool to support communication and to form the basis for developing and maintaining product structures for improving development practices of complex products. This paper contains descriptions, observations...... product system, will lead to better decision making. Moreover, it is discussed how the sometimes intangible product structures within a architecture can be visually modeled based on the assumption that knowledge about a product’s architecture has to be tangibly instantiated, in order for people......, and lessons learned from a case study in which the author tested a modelling tool to represent a product’s architecture during product development in a larger Danish company. The reasons leading to the use of the specific model and it’s terminology is described and illustrated. The paper supports two...

  9. Changeability of production management systems

    NARCIS (Netherlands)

    Hoogenraad, M. S.; Wortmann, J. C.; Olhager, J; Persson, F

    2007-01-01

    Modem production management systems consist of transaction processing systems and decision enhancement systems. A clear example of two such components are an ERP systems and APS systems. These systems are often standard software systems, and therefore suitable for many different situations. This

  10. Mitigation strategies for greenhouse gas emissions from animal production systems: synergy between measuring and modelling at different scales

    NARCIS (Netherlands)

    Groenigen, van J.W.; Schils, R.L.M.; Velthof, G.L.; Kuikman, P.J.; Oudendag, D.A.; Oenema, O.

    2008-01-01

    Animal production systems are large and complex sources of greenhouse gases (GHG), especially nitrous oxide (N2O) and methane (CH4). Emissions from these systems are expected to rise over the coming decades due to the increasing global population and shifting diets, unless appropriate mitigation

  11. Energy efficiency analysis method based on fuzzy DEA cross-model for ethylene production systems in chemical industry

    International Nuclear Information System (INIS)

    Han, Yongming; Geng, Zhiqiang; Zhu, Qunxiong; Qu, Yixin

    2015-01-01

    DEA (data envelopment analysis) has been widely used for the efficiency analysis of industrial production process. However, the conventional DEA model is difficult to analyze the pros and cons of the multi DMUs (decision-making units). The DEACM (DEA cross-model) can distinguish the pros and cons of the effective DMUs, but it is unable to take the effect of the uncertainty data into account. This paper proposes an efficiency analysis method based on FDEACM (fuzzy DEA cross-model) with Fuzzy Data. The proposed method has better objectivity and resolving power for the decision-making. First we obtain the minimum, the median and the maximum values of the multi-criteria ethylene energy consumption data by the data fuzzification. On the basis of the multi-criteria fuzzy data, the benchmark of the effective production situations and the improvement directions of the ineffective of the ethylene plants under different production data configurations are obtained by the FDEACM. The experimental result shows that the proposed method can improve the ethylene production conditions and guide the efficiency of energy utilization during ethylene production process. - Highlights: • This paper proposes an efficiency analysis method based on FDEACM (fuzzy DEA cross-model) with data fuzzification. • The proposed method is more efficient and accurate than other methods. • We obtain an energy efficiency analysis framework and process based on FDEACM in ethylene production industry. • The proposed method is valid and efficient in improvement of energy efficiency in the ethylene plants

  12. CRC-cards for Product Modelling

    DEFF Research Database (Denmark)

    Hvam, Lars; Riis, Jesper; Hansen, Benjamin Loer

    2003-01-01

    , transportation, service and decommissioning. A main challenge when building product models is to collect and document the product related data, information and knowledge in a structured way. CRC cards are index cards (or computerized versions of these) which are used to record proposed classes, the behavior...... of the classes, their responsibilities, and their relationship to other classes (collaboration). CRC modelling gives an effective, low-tech method for domain-experts, programmers and users to work closely together to identify, structure, understand and document a product model. CRC cards were originally......This paper describes the CRC (class, responsibility, collaboration) modelling process for building product models. A product model is normally represented in an IT system which contains data, information and knowledge on industrial products and their life cycle properties e.g. manufacturing...

  13. Typology of Product Configuration Systems

    DEFF Research Database (Denmark)

    Jensen, Klaes Ladeby; Edwards, Kasper; Haug, Anders

    2007-01-01

    Many organisations are moving from mass production to mass customization. Product configuration systems (PCS) are increasingly seen as an interesting option for firms who wish to pursue a strategy with a high degree of product variance while retaining a low cost of specifying the product. To become...

  14. Bacteriophage treatment significantly reduces viable Clostridium difficile and prevents toxin production in an in vitro model system.

    Science.gov (United States)

    Meader, Emma; Mayer, Melinda J; Gasson, Michael J; Steverding, Dietmar; Carding, Simon R; Narbad, Arjan

    2010-12-01

    Clostridium difficile is primarily a nosocomial pathogen, causing thousands of cases of antibiotic-associated diarrhoea in the UK each year. In this study, we used a batch fermentation model of a C. difficile colonised system to evaluate the potential of a prophylactic and a remedial bacteriophage treatment regime to control the pathogen. It is shown that the prophylaxis regime was effective at preventing the growth of C. difficile (p = viable C. difficile cells (p = <0.0001), but still resulted in a lower level of toxin production relative to the control. The numbers of commensal bacteria including total aerobes and anaerobes, Bifidobacterium sp., Bacteroides sp., Lactobacillus sp., total Clostridium sp., and Enterobacteriaceae were not significantly decreased by this therapy, whereas significant detrimental effects were observed with metronidazole treatment. Our study indicates that phage therapy has potential to be used for the control of C. difficile; it highlights the main benefits of this approach, and some future challenges. Copyright © 2010 Elsevier Ltd. All rights reserved.

  15. Integrated Monitoring System of Production Processes

    Directory of Open Access Journals (Sweden)

    Oborski Przemysław

    2016-12-01

    Full Text Available Integrated monitoring system for discrete manufacturing processes is presented in the paper. The multilayer hardware and software reference model was developed. Original research are an answer for industry needs of the integration of information flow in production process. Reference model corresponds with proposed data model based on multilayer data tree allowing to describe orders, products, processes and save monitoring data. Elaborated models were implemented in the integrated monitoring system demonstrator developed in the project. It was built on the base of multiagent technology to assure high flexibility and openness on applying intelligent algorithms for data processing. Currently on the base of achieved experience an application integrated monitoring system for real production system is developed. In the article the main problems of monitoring integration are presented, including specificity of discrete production, data processing and future application of Cyber-Physical-Systems. Development of manufacturing systems is based more and more on taking an advantage of applying intelligent solutions into machine and production process control and monitoring. Connection of technical systems, machine tools and manufacturing processes monitoring with advanced information processing seems to be one of the most important areas of near future development. It will play important role in efficient operation and competitiveness of the whole production system. It is also important area of applying in the future Cyber-Physical-Systems that can radically improve functionally of monitoring systems and reduce the cost of its implementation.

  16. Products in fusion systems

    DEFF Research Database (Denmark)

    Henke, Ellen

    2013-01-01

    We revisit the notion of a product of a normal subsystem with a p-subgroup as defined by Aschbacher (2011) [Asc11, Chapter 8]. In particular, we give a previously unknown, more transparent construction....

  17. Processed Products Database System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection of annual data on processed seafood products. The Division provides authoritative advice, coordination and guidance on matters related to the collection,...

  18. Coupled analysis of floating production systems

    Energy Technology Data Exchange (ETDEWEB)

    Garrett, D.L. [Stress Engineering Services, Houston, TX (United States)

    2005-05-01

    Fully coupled global analysis of Floating Production Systems, including the vessel, the mooring system and the riser system is described. Design of the system can be a daunting task, involving more than 1000 load cases for global analysis. The primary driver for the mooring system and for the riser system is motion of the vessel. Vessel motions are driven by environmental forces, but are restrained by forces from the mooring and riser systems. Numerical models and procedures that provide accurate and efficient global modeling of the Floating Production System are presented. Both Time Domain and Frequency Domain procedures are included. The accuracy and efficiency of the procedures are illustrated in an example: a large semi with 16 mooring lines and 20 risers. The procedures provide the accuracy and efficiency for use of fully coupled analysis in design of Floating Production Systems from concept selection to final design, installation and operation. (Author)

  19. Production ecology of agroforestry systems: A minimal mechanistic model and analytical derivation of the land equivalent ratio

    NARCIS (Netherlands)

    Keesman, K.J.; Werf, van der W.; Keulen, van H.

    2007-01-01

    In this paper, the yield and the land equivalent ratio (LER) of a silvo-arable agroforestry (SAF) system, containing one tree and one crop species, is analyzed analytically using a minimal mechanistic model describing the system dynamics. Light competition between tree and crop is considered using

  20. The Development of Sugar Beet Production and Processing Simulation Model – a System Dynamics Approach to Support Decision-Making Processes

    Directory of Open Access Journals (Sweden)

    Rozman Črtomir

    2014-05-01

    Full Text Available Background: The sugar beet is the main field crop used for sugar production in the temperate climatic zone. The abolishment of the quota system will open new investment opportunities in countries that were forced to abandon sugar industry as the result of the reform in 2006. Present paper describes the modeling of sugar beet production and its processing into sugar for purpose of decision support.

  1. Mudular Product Families and Assembly Systems

    DEFF Research Database (Denmark)

    Thyssen, Jesper

    , articulates a system model incorporating both structural and performance elements. The extensive and detailed case analysis provides the necessary insight into the specific variables associated with the complex configuration of modular products and assembly systems.   Based upon the system model a number......  The main objective of this thesis is to investigate the phenomenon of product modularization as an apparently both powerful and complex means. The focal research objective is to obtain an improved insight and understanding of the relationship between variables associated with configuration...... of modular product families and the interacting assembly system.   The thesis reviews extant theory and provides various classifications and discussions guided by the overall theme of product modularity and assembly systems. The empirical system analysis, based upon a longitudinal single case study...

  2. Model checking sum and product

    NARCIS (Netherlands)

    van Ditmarsch, H; Ruan, H; Verbrugge, L.C.; Zhang, S.; Jarvis, R.

    2005-01-01

    We model the well-known Sum-and-Product problem in a modal logic, and verify its solution in a model checker. The modal logic is public announcement logic. The riddle is then implemented and its solution verified in the epistemic model checker DEMO.

  3. Production control system specified quality sausage products

    Directory of Open Access Journals (Sweden)

    A. V. Tokarev

    2016-01-01

    Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

  4. European oil product supply modelling

    International Nuclear Information System (INIS)

    Saint-Antonin, V.

    1998-01-01

    Over the last few years, trends in European oil product consumption (in terms of level as structure and quality) has important implications of the refining industry. In this context, the purpose of this thesis consists in building a mathematical programming model applied to the European refineries in order to determine oil product supply prices, European refining industry investments and oil product exchanges of the European Union. The first part presents the reason for our choice for a long-term aggregate multi-refineries linear programming model, based on European refineries characteristics and the objectives of our model. Its dual properties are studied in detail and we focus particularly on the European exchange modelling. In the second part, an analysis of the European refining trends leads us to identify parameters and variables of the model that are essential to the aggregate representation of the European oil product supply. The third part is devoted to the use of this model, regarding two scenarios of increasingly stringent specifications for gasoline and diesel oil. Our interest for these products is due to their important share of the European oil product consumption and the not insignificant responsibility of the transport sector for atmospheric pollution. Finally, in order to have the use of an overall picture of the European refining industry, we build a regression model summarizing, though a few equations, the main relations between the major endogenous and exogenous variables o the LP model. Based on pseudo-data, this kind of model provides a simple and robust representation of the oil product supply. But a more specialized analysis of the refining industry operations, turning on a technical assessment of processing units, is reliant on the use of an optimization model such as the model we have built. (author)

  5. A model for the development of a power production system in Greece, Part I: Where RES do not meet EU targets

    International Nuclear Information System (INIS)

    Kalampalikas, Nikolaos G.; Pilavachi, Petros A.

    2010-01-01

    This paper studies the electricity production system of the Greek Interconnected Electric Production System using a model created with the software package WASP-IV. The period of study is from 2009 to 2030. It consists of three scenarios using three different criteria: energy, environmental and economic. The three scenarios are the business as usual, the lignite and the natural gas. Subsequently, a sensitivity analysis is carried out for the annual growth rate of electricity consumption and load demand. The paper examines how the three criteria change, when there are no other energy sources beyond those already in use (lignite, oil, natural gas, biomass, solar, wind and hydropower) with no CO 2 capture policies and with the electricity production from Renewable Energy Sources not to reach the targets of the European Union for 2020. In a second paper, three other scenarios examine production with the Renewable Energy Sources to reach the targets of the European Union for 2020.

  6. The system Around the Product

    DEFF Research Database (Denmark)

    Morelli, Nicola

          The design discipline has traditionally focused on products physical aspects, giving for granted that the context of services, infrastructures and technology will support the product life. A systemic perspective would revise such a focus, in order to project design competences over systemic...... aspects usually neglected by designers. This perspective shift is a challenge for designers, who have very efficient methods and tools to handle physical aspects of product design, but need to define an ?operative paradigm? to operate in a systemic context. An operative paradigm consists of a set of tools...... and methods to handle immaterial aspects such as time sequences, actors? role and logical links in a product service system (PSS). Tools and methods can be borrowed from other disciplinary contexts, their relevance, though, derives from their adaptation to this specific study area: designing in a systemic...

  7. A Regular Production-Remanufacturing Inventory Model for a Two-Echelon System with Price-dependent Return Rate and Environmental Effects Investigation

    Science.gov (United States)

    Dwicahyani, A. R.; Jauhari, W. A.; Jonrinaldi

    2017-06-01

    Product take-back recovery has currently became a promising effort for companies in order to create a sustainable supply chain. In addition, some restrictions including government regulations, social-ethical responsibilities, and up to economic factors have contributed to the reasons for the importance of product take-back recovery. This study aims to develop an inventory model in a system of reverse logistic management consisting of a manufacturer and a collector. Recycle dealer collects used products from the market and ships it to manufacturer. Manufacturer then recovers the used products and sell it eventually to the market. Some recovered products that can not be recovered as good as new one will be sold to the secondary market. In this study, we investigate the effects of environmental factors including GHG emissions and energy usage from transportation, regular production, and remanufacturing operations conducted by manufacturer and solve the model to get the maximum annual joint total profit for both parties. The model also considers price-dependent return rate and determine it as a decision variable as well as number of shipments from collector to manufacturer and optimal cycle period. An iterative procedure is proposed to determine the optimal solutions. We present a numerical example to illustrate the application of the model and perform a sensitivity analysis to study the effects of the changes in environmental related costs on the model’s decision.

  8. Modular Product Families and Assembly Systems

    DEFF Research Database (Denmark)

    Thyssen, Jesper

    2005-01-01

    of the rela-tionship between variables associated with configuration of modular product families and the interacting assembly system. One core result is the development of a system model based on the longitudinal case study incorporating both structural and performance elements. Based on the system model......This research centres on assembly systems designed for utilizing product modularization. Altogether, the task for companies has become an issue of managing the overall trade-off between the external market’s desire for variety and the internal efficiency and effectiveness. Product modularization...... is often claimed to be the answer to this trade-off in the extant literature. The overall research purpose has been to investigate the phenomena of product modularization as an apparently both powerful and com-plex means. The focal research objective is to obtain an improved insight and understanding...

  9. AN EVOLUTIONARY STUDY ON CROP PRODUCTION IN SMALL FARM SYSTEMS IN THE MID-WEST REGION OF BRAZIL BASED ON A LINEAR PROGRAMMING MODEL

    Directory of Open Access Journals (Sweden)

    Maria Amelia Biagio

    2014-05-01

    Full Text Available Based on an agro-technical study for the mid-west region of Brazil, and considering financial conditions like monthly expenses and long-term investments, a mixed integer and dynamic linear model has been proposed for representing crop production systems. This model establishes a monthly dynamic treatment of production and financial activities over a long-term planning horizon for small and medium farm systems. In this paper, by considering more recent government financial policies for the Brazilian agricultural sector related to the Pronaf and Proger credit lines, a mathematical model is updated for distinct situations derived from the use of short and long-term loans which were defined for small and medium farmers. In this way, new versions of the original model are obtained by separately implementing into the production systems economic and financial conditions of credit lines for the years 2006 and 2009. Computational tests are performed and the results obtained are presented in several scenarios. Also, an evolutionary analysis on the socio-economic and financial feasibility of the agricultural farm system is drawn over the last decade by comparing the results obtained to one known from the year 2002.

  10. Experimental model for the study of the human immune system: production and monitoring of "human immune system" Rag2-/-gamma c-/- mice

    NARCIS (Netherlands)

    Legrand, Nicolas; Weijer, Kees; Spits, Hergen

    2008-01-01

    Since the late 1980s, the study of the function and development of the human immune system has made intensive use of humanized animal models, among which mouse models have been proven extremely efficient and handy. Recent advances have lead to the establishment of new models with improved

  11. Review on Biomass Torrefaction Process and Product Properties and Design of Moving Bed Torrefaction System Model Development

    Energy Technology Data Exchange (ETDEWEB)

    Jaya Shankar Tumuluru; Christopher T. Wright; Shahab Sokhansanj

    2011-08-01

    A Review on Torrefaction Process and Design of Moving Bed Torrefaction System for Biomass Processing Jaya Shankar Tumuluru1, Shahab Sokhansanj2 and Christopher T. Wright1 Idaho National Laboratory Biofuels and Renewable Energy Technologies Department Idaho Falls, Idaho 83415 Oak Ridge National Laboratory Bioenergy Resource and Engineering Systems Group Oak Ridge, TN 37831 Abstract Torrefaction is currently developing as an important preprocessing step to improve the quality of biomass in terms of physical properties, and proximate and ultimate composition. Torrefaction is a slow heating of biomass in an inert or reduced environment to a maximum temperature of 300 C. Torrefaction can also be defined as a group of products resulting from the partially controlled and isothermal pyrolysis of biomass occurring in a temperature range of 200-230 C and 270-280 C. Thus, the process can also be called a mild pyrolysis as it occurs at the lower temperature range of the pyrolysis process. At the end of the torrefaction process, a solid uniform product with lower moisture content and higher energy content than raw biomass is produced. Most of the smoke-producing compounds and other volatiles are removed during torrefaction, which produces a final product that will have a lower mass but a higher heating value. There is a lack of literature on the design aspects of torrefaction reactor and a design sheet for estimating the dimensions of the torrefier based on capacity. This study includes (a) conducting a detailed review on the torrefaction of biomass in terms of understanding the process, product properties, off-gas compositions, and methods used, and (b) to design a moving bed torrefier, taking into account the basic fundamental heat and mass transfer calculations. Specific objectives include calculating the dimensions like diameter and height of the moving packed bed torrefier for different capacities ranging from 25-1000 kg/hr, designing the heat loads and gas flow rates, and

  12. Models and Modelling Tools for Chemical Product and Process Design

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    2016-01-01

    -process design. Illustrative examples highlighting the need for efficient model-based systems will be presented, where the need for predictive models for innovative chemical product-process design will be highlighted. The examples will cover aspects of chemical product-process design where the idea of the grand......The design, development and reliability of a chemical product and the process to manufacture it, need to be consistent with the end-use characteristics of the desired product. One of the common ways to match the desired product-process characteristics is through trial and error based experiments......, which can be expensive and time consuming. An alternative approach is the use of a systematic model-based framework according to an established work-flow in product-process design, replacing some of the time consuming and/or repetitive experimental steps. The advantages of the use of a model...

  13. Capability Maturity Model Integration (CMMISM), Version 1.1 CMMISM for Systems Engineering, Software Engineering, Integrated Product and Process Development, and Supplier Sourcing (CMMI-SE/SW/IPPD/SS, V1.1). Staged Representation

    National Research Council Canada - National Science Library

    2002-01-01

    .... Concepts covered by this model include systems engineering, software engineering, integrated product and process development, and supplier sourcing as well as traditional CMM concepts such as process...

  14. The SPOOKI post production system

    Science.gov (United States)

    Beauchemin, M.; Klasa, M.; Fortier, S.; Fortin, F.; Hardy, G.; Pelletier, L.; Edouard, S.; Archambault, B.; Yazidi, H.

    2010-09-01

    The Canadian Meteorological Centre (CMC) delivers a large number of numerical weather prediction products to the various weather offices and clients throughout Canada and abroad. The current post production system was built according to the needs and ideology of the 1980's and it is becoming obsolete with time. Its cumbersome architecture is difficult to maintain and requires a lot of human and computing resources. The "Weather Elements" section of CMC is aware of the problems associated with its maintenance in the long term and has therefore decided to review in depth the whole approach to the operational post production. The analysis of present and future needs have led to the development of an innovative concept in the operational production field inspired by the "Plug and Play" process. SPOOKI (Système de Production Orienté-Objet contennant une Kyrielle d'Informations - Object oriented production system containing a myriad of information) was created in its present form in 2007. It is based on a modular approach where each plug-in component is specialized, reusable and autonomous. These object oriented programming characteristics greatly simplify the maintenance of the system. Particular attention was also given to create a user-friendly system for novice users. An experimental version of SPOOKI is currently running in development mode and an operational one is planned to be implemented in the coming year. The poster presentation will describe SPOOKI, the future CMC operational post production system. Several examples of usage will be shown.

  15. Optimization of the Production of Sludge in an Activated Sludge System Through the Calibration of the ASM1 Model

    Directory of Open Access Journals (Sweden)

    Espinosa-Rodríguez M.A

    2015-01-01

    Full Text Available Recently several protocols have been proposed for the calibration the ASM1 model and each one of them emphasizes obtaining a good adjustment in the production of sludge. Precisely here is where the discrepancies are evaluated and adjustments made to data, through a mass balance. The objective of this work was to conduct first a balance of flows in the wastewater treatment plant "Dulces Nombres" in Monterrey, Nuevo Leon, Mexico, and then adjust them until closing properly the mass balance for the total phosphorus, total suspended solids, and inorganic suspended solids (ISS. On might say that to calibrate the biological model was important to determine reliably the flow of sludge (QWAS since on it depends the cell retention mean time (θC in the reactor; this was accomplished successfully through the balance of the ISS and using of GPS-X software for the simulation of scenarios of optimization.

  16. Production economic models of fisheries

    DEFF Research Database (Denmark)

    Andersen, Jesper Levring

    The overall purpose of this PhD thesis is to investigate different aspects of fishermen’s behaviour using production economic models at the individual and industry levels. Three parts make up this thesis. The first part provides an overview of the thesis. The second part consists of four papers a...... in relation to an ITQ system, including concentration, specialisation, market activity and price changes. Finally, plausible consequences of exogenous chocks and changes in management practice in the form of mesh size increases are considered....... via individual learning and adjustments in output mix. All the papers included in Part II: Modelling and Evaluating Fishermen’s Behaviour consider factors influencing fishermen’s behaviour. Knowledge about these factors is important to give a correct description of fishermen’s behaviour. However....... They concern the ability to learn best-practice (catch-up) and the ability to change the input and output composition (mix). The framework is then adapted to a dataset from the Danish fishery. Not surprisingly, the gains rise with increased behavioural flexibility. Under the most restrictive assumptions...

  17. The system around the product

    DEFF Research Database (Denmark)

    Morelli, Nicola

    2006-01-01

    The design discipline has traditionally focused on products’ physical aspects, giving for granted that the context of services, infrastructures and technology will support the product life. A systemic perspective would revise such a focus, in order to project design competences over systemic...... aspects usually neglected by designers. This perspective shift is a challenge for designers, who have very efficient methods and tools to handle physical aspects of product design, but need to define an ‘operative paradigm’ to operate in a systemic context. An operative paradigm consists of a set of tools...... and methods to handle immaterial aspects such as time sequences, actors’ role and logical links in a product service system (PSS). Tools and methods can be borrowed from other disciplinary contexts, their relevance, though, derives from their adaptation to this specific study area: designing in a systemic...

  18. Modelling Configuration Knowledge in Heterogeneous Product Families

    DEFF Research Database (Denmark)

    Queva, Matthieu Stéphane Benoit; Männistö, Tomi; Ricci, Laurent

    2011-01-01

    the variability in such heterogeneous product families. Our approach is based on a framework that aims to cater for the different stakeholders involved in the modelling and management of the product family. The modelling approach is centred around the concepts of views, types and constraints and is illustrated...... by a motivation example. Furthermore, as a proof of concept, a prototype has been implemented for configuring a non-trivial heterogeneous product family.......Product configuration systems play an important role in the development of Mass Customisation. The configuration of complex product families may nowadays involve multiple design disciplines, e.g. hardware, software and services. In this paper, we present a conceptual approach for modelling...

  19. Modeling, Analysis and Simulation of Simple One Machine-Two Product System Using Petri Nets = Basit Bir Makine-İki Ürün Sisteminin Petri Ağları Kullanılarak Modellenmesi, Analizi ve Simulasyonu

    Directory of Open Access Journals (Sweden)

    Özgür ARMANERİ

    2006-01-01

    Full Text Available As in many engineering fields, the design of manufacturing systems can be carried out using models. Petri nets have been used extensively to model and analyze manufacturing systems. Petri Nets, as graphical and mathematical tools, provide a uniform environment for modeling, format analysis and design of discrete event systems. The modeling, simulation and analysis of simple one machine-two product systems using Petri nets will be presented in this paper. Behavioral and structural properties of the Petri net model will be considered in details. Then, the Petri net model of one machine-two product system will be simulated using a simulation program.

  20. Hybrid simulation models of production networks

    CERN Document Server

    Kouikoglou, Vassilis S

    2001-01-01

    This book is concerned with a most important area of industrial production, that of analysis and optimization of production lines and networks using discrete-event models and simulation. The book introduces a novel approach that combines analytic models and discrete-event simulation. Unlike conventional piece-by-piece simulation, this method observes a reduced number of events between which the evolution of the system is tracked analytically. Using this hybrid approach, several models are developed for the analysis of production lines and networks. The hybrid approach combines speed and accuracy for exceptional analysis of most practical situations. A number of optimization problems, involving buffer design, workforce planning, and production control, are solved through the use of hybrid models.

  1. Model of the distribution of functional tasks in a decentralized system of information processing and management of an oil and gas production administration

    Energy Technology Data Exchange (ETDEWEB)

    Abdullayev, A.A.; Kaplan, G.A.; Shakhnazarov, I.V.

    1982-01-01

    Examined are questions about the creation of a decentralized control system for an oil and gas production admininstration. To determine the composition and the locations of the equipment, the number and quality of the functions fulfilled by them, the presence of communications channels with the required throughputs, a mathematic model of Boolean program is proposed. Examined in the model are the variables which determine the relation of the task being solved to the technical equipment and to the solution level in a heirarchical control system, as well as the variables which describe the presence of a specific class of linkage between levels. Used as the target function is the maximum of effectivness of the decentralized system, which is the difference between the effect from the functioning of the system (with consideration of losses formed as a result of a break down of the technical equipment and the communications channels, as well as expenditures for its creation.

  2. Product Tax Modelling in INFORGE

    OpenAIRE

    Mönnig, Anke

    2008-01-01

    In this paper, the application of INFORGE as an analyzing tool for fiscal policy shocks is introduced by using the example of taxes on products. In recent times, variations of tax rates on product taxes have become rather popular because it is a simple method to consolidate state budget. A detailed modelling of taxes on products is important for further two reasons: (i) they are an important component for the transition from demand at purchasers’ prices to demand at basic prices. (ii) Taxes o...

  3. Performance test results of mock-up model test facility with a full-scale reaction tube for HTTR hydrogen production system. Contract research

    Energy Technology Data Exchange (ETDEWEB)

    Inagaki, Yoshiyuki; Hayashi, Koji; Kato, Michio [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment] [and others

    2003-03-01

    Research on a hydrogen production system by steam reforming of methane, chemical reaction; CH{sub 4} + H{sub 2}O {yields} 3H{sub 2}O + CO, has been carried out to couple with the HTTR for establishment of high-temperature nuclear heat utilization technology and contribution to hydrogen energy society in future. The mock-up test facility with a full-scale reaction tube test facility, a model simulating one reaction tube of a steam reformer of the HTTR hydrogen production system in full scale, was fabricated to perform tests on controllability, hydrogen production performance etc. under the same pressure and temperature conditions as those of the HTTR hydrogen production system. The design and fabrication of the test facility started from 1997, and the all components were installed until September in 2001. In a performance test conducted from October in 2001 to February in 2002, performance of each component was examined and hydrogen of 120m{sup 3}{sub N}/h was successfully produced with high-temperature helium gas. This report describes the performance test results on components performance, hydrogen production characteristics etc., and main troubles and countermeasures. (author)

  4. The Influence of Climate, Soil and Pasture Type on Productivity and Greenhouse Gas Emissions Intensity of Modeled Beef Cow-Calf Grazing Systems in Southern Australia.

    Science.gov (United States)

    Bell, Matthew J; Cullen, Brendan R; Eckard, Richard J

    2012-10-01

    A biophysical whole farm system model was used to simulate the interaction between the historical climate, soil and pasture type at sites in southern Australia and assess the balance between productivity and greenhouse gas emissions (expressed in carbon dioxide equivalents, CO₂-eq.) intensity of beef cow-calf grazing systems. Four sites were chosen to represent a range of climatic zones, soil and pasture types. Poorer feed quality and supply limited the annual carrying capacity of the kikuyu pasture compared to phalaris pastures, with an average long-term carrying capacity across sites estimated to be 0.6 to 0.9 cows/ha. A relative reduction in level of feed intake to productivity of calf live weight/ha at weaning by feeding supplementary feed reduced the average CO₂-eq. emissions/kg calf live weight at weaning of cows on the kikuyu pasture (18.4 and 18.9 kg/kg with and without supplementation, respectively), whereas at the other sites studied an increase in intake level to productivity and emission intensity was seen (between 10.4 to 12.5 kg/kg without and with supplementary feed, respectively). Enteric fermentation and nitrous oxide emissions from denitrification were the main sources of annual variability in emissions intensity, particularly at the lower rainfall sites. Emissions per unit product of low input systems can be minimized by efficient utilization of pasture to maximize the annual turnoff of weaned calves and diluting resource input per unit product.

  5. Development of an image converter of radical design. [employing solid state electronics towards the production of an advanced engineering model camera system

    Science.gov (United States)

    Irwin, E. L.; Farnsworth, D. L.

    1972-01-01

    A long term investigation of thin film sensors, monolithic photo-field effect transistors, and epitaxially diffused phototransistors and photodiodes to meet requirements to produce acceptable all solid state, electronically scanned imaging system, led to the production of an advanced engineering model camera which employs a 200,000 element phototransistor array (organized in a matrix of 400 rows by 500 columns) to secure resolution comparable to commercial television. The full investigation is described for the period July 1962 through July 1972, and covers the following broad topics in detail: (1) sensor monoliths; (2) fabrication technology; (3) functional theory; (4) system methodology; and (5) deployment profile. A summary of the work and conclusions are given, along with extensive schematic diagrams of the final solid state imaging system product.

  6. An Observing System Simulation Experiment (OSSE) Investigating the OMI Aerosol Products Using Simulated Aerosol and Atmospheric Fields from the NASA GEOS-5 Model

    Science.gov (United States)

    Colarco, P. R.; Gasso, S.; Jethva, H. T.; Buchard, V.; Ahn, C.; Torres, O.; daSilva, A.

    2016-12-01

    Output from the NASA Goddard Earth Observing System, version 5 (GEOS-5) Earth system model is used to simulate the top-of-atmosphere 354 and 388 nm radiances observed by the Ozone Monitoring Instrument (OMI) onboard the Aura spacecraft. The principle purpose of developing this simulator tool is to compute from the modeled fields the so-called OMI Aerosol Index (AI), which is a more fundamental retrieval product than higher level products such as the aerosol optical depth (AOD) or absorbing aerosol optical depth (AAOD). This lays the groundwork for eventually developing a capability to assimilate either the OMI AI or its radiances, which would provide further constraint on aerosol loading and absorption properties for global models. We extend the use of the simulator capability to understand the nature of the OMI aerosol retrieval algorithms themselves in an Observing System Simulation Experiment (OSSE). The simulated radiances are used to calculate the AI from the modeled fields. These radiances are also provided to the OMI aerosol algorithms, which return their own retrievals of the AI, AOD, and AAOD. Our assessment reveals that the OMI-retrieved AI can be mostly harmonized with the model-derived AI given the same radiances provided a common surface pressure field is assumed. This is important because the operational OMI algorithms presently assume a fixed pressure field, while the contribution of molecular scattering to the actual OMI signal in fact responds to the actual atmospheric pressure profile, which is accounted for in our OSSE by using GEOS-5 produced atmospheric reanalyses. Other differences between the model and OMI AI are discussed, and we present a preliminary assessment of the OMI AOD and AAOD products with respect to the known inputs from the GEOS-5 simulation.

  7. Evaluation of the Cornell Net Carbohydrate and Protein System model on the prediction of dry matter intake and milk production of grazing crossbred cows

    Directory of Open Access Journals (Sweden)

    Mirton José Frota Morenz

    2012-02-01

    Full Text Available The Cornel Net Carbohydrate and Protein System model version 5.0 was assessed as for its prediction of dry matter intake and milk production of grazing lactating Holstein × Zebu cows. Eight lactating cows grazing elephant grass (Pennisetum purpureum, Schum., cv. Napier were used in two experiments of 30 days each. The experimental design was of randomized blocks (subplots. Dry matter intake was estimated using the chromium oxide and in vitro dry matter digestibility techniques. The estimated dry matter intake was compared with the values predicted by the model. Extrusa samples of the elephant grass pasture were obtained from a cow with esophageal fistula during nine days in each experimental period. Carbohydrate and nitrogenous fractions were analyzed and the degradation rate of carbohydrate was estimated by the gas production technique. The inputs referring to the animals (body weight, age, milk production, milk composition and breed type, to the environment (temperature, relative humidity of air and management condition and to feeds chemical composition in each experimental period were inserted in the model. The model was accurate on the prediction of dry matter intake, considering that the mean values obtained by the chromium oxide technique and predicted by model (2.45 and 2.46% of body weight, respectively did not differ significantly from each other. However, the model underestimated the observed milk production in 62.4%, where the metabolizable energy was the first limiting. These results demonstrate the need for studies that provide the development of a database for tropical foods (chemical composition and dynamics of rumen fermentation and fitting of the model to the tropical conditions, for its appropriate application in formulation of diets and supplements in these regions.

  8. Simulation Based Optimization for World Line Card Production System

    Directory of Open Access Journals (Sweden)

    Sinan APAK

    2012-07-01

    Full Text Available Simulation based decision support system is one of the commonly used tool to examine complex production systems. The simulation approach provides process modules which can be adjusted with certain parameters by using data relatively easily obtainable in production process. World Line Card production system simulation is developed to evaluate the optimality of existing production line via using discrete event simulation model with variaty of alternative proposals. The current production system is analysed by a simulation model emphasizing the bottlenecks and the poorly utilized production line. Our analysis identified some improvements and efficient solutions for the existing system.

  9. The ATLAS Production System Evolution

    CERN Document Server

    Borodin, Mikhail; The ATLAS collaboration

    2017-01-01

    The second generation of the ATLAS Production System called ProdSys2 is a distributed workload manager that runs daily hundreds of thousands of jobs, from dozens of different ATLAS-specific workflows, across more than a hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based upon many criteria, such as input and output size, memory requirements and CPU consumption, with manageable scheduling policies and by supporting different kinds of computational resources, such as GRID, clouds, supercomputers and volunteer computers. The system dynamically assigns a group of jobs (task) to a group of geographically distributed computing resources. Dynamic assignment and resource utilization is one of the major features of the system. The Production System has a sophisticated job fault recovery mechanism, which efficiently allows running multi-terabyte tasks without human intervention. We have implemented new features which allow automatic task submission and chaining of differe...

  10. Product State Modelling based on a Meta Production

    DEFF Research Database (Denmark)

    Larsen, Michael Holm; Sørensen, Christian; Langer, Gilad

    1999-01-01

    ) is a product model that contains continuously updated data regarding the outcome of the production processes. The main contribution of this paper is a definition and a description of a Production Meta Product State Model (Production Meta PSM), using the Unified Modelling Language (UML). The meta model......As products often deviate from their original design and specifications when being produced, adjustments of the product or process are required in order to meet specifications. A prerequisite for this adjustment, is appropriate and effectively collected shop floor data. The Product State Model (PSM...... incorporates a set of characteristics associated to the (1) scope or application domain of the PSM, (2) the artefact or product, and (3) the events transforming the product and trigging product state changes. Moreover, the paper provides guidelines for a specialisation of the meta model with respect...

  11. Development of a production meta Product State Model

    DEFF Research Database (Denmark)

    Larsen, Michael Holm; Sørensen, Christian; Langer, Gilad

    1999-01-01

    ) is a product model that contains continuously updated data regarding the outcome of the production processes. The main contribution of this paper is a definition and a description of a Production Meta Product State Model (Production Meta PSM), using the Unified Modelling Language (UML). The meta model......As products often deviate from their original design and specifications when being produced, adjustments of the product or process are required in order to meet specifications. A prerequisite for this adjustment, is appropriate and effectively collected shop floor data. The Product State Model (PSM...... incorporates a set of characteristics associated to the (1) scope or application domain of the PSM, (2) the artefact or product, and (3) the events transforming the product and trigging product state changes. Moreover, the paper provides guidelines for a specialisation of the meta model with respect...

  12. Entanglement production in quantized chaotic systems

    Indian Academy of Sciences (India)

    Quantum chaos is a subject whose major goal is to identify and to investigate different quantum signatures of classical chaos. Here we study entanglement production in coupled chaotic systems as a possible quantum indicator of classical chaos. We use coupled kicked tops as a model for our extensive numerical studies.

  13. Characterizing the emission implications of future natural gas production and use in the U.S. and Rocky Mountain region: A scenario-based energy system modeling approach

    Science.gov (United States)

    McLeod, Jeffrey

    The recent increase in U.S. natural gas production made possible through advancements in extraction techniques including hydraulic fracturing has transformed the U.S. energy supply landscape while raising questions regarding the balance of environmental impacts associated with natural gas production and use. Impact areas at issue include emissions of methane and criteria pollutants from natural gas production, alongside changes in emissions from increased use of natural gas in place of coal for electricity generation. In the Rocky Mountain region, these impact areas have been subject to additional scrutiny due to the high level of regional oil and gas production activity and concerns over its links to air quality. Here, the MARKAL (MArket ALlocation) least-cost energy system optimization model in conjunction with the EPA-MARKAL nine-region database has been used to characterize future regional and national emissions of CO 2, CH4, VOC, and NOx attributed to natural gas production and use in several sectors of the economy. The analysis is informed by comparing and contrasting a base case, business-as-usual scenario with scenarios featuring variations in future natural gas supply characteristics, constraints affecting the electricity generation mix, carbon emission reduction strategies and increased demand for natural gas in the transportation sector. Emission trends and their associated sensitivities are identified and contrasted between the Rocky Mountain region and the U.S. as a whole. The modeling results of this study illustrate the resilience of the short term greenhouse gas emission benefits associated with fuel switching from coal to gas in the electric sector, but also call attention to the long term implications of increasing natural gas production and use for emissions of methane and VOCs, especially in the Rocky Mountain region. This analysis can help to inform the broader discussion of the potential environmental impacts of future natural gas production

  14. Expert system for estimating LWR plutonium production

    International Nuclear Information System (INIS)

    Sandquist, G.M.

    1988-01-01

    An Artificial Intelligence-Expert System called APES (Analysis of Proliferation by Expert System) has been developed and tested to permit a non proliferation expert to evaluate the capability and capacity of a specified LWR reactor and PUREX reprocessing system for producing and separating plutonium even when system information may be limited and uncertain. APES employs an expert system coded in LISP and based upon an HP-RL (Hewlett Packard-Representational Language) Expert System Shell. The user I/O interface communicates with a blackboard and the knowledge base which contains the quantitative models required to describe the reactor, selected fission product production and radioactive decay processes, Purex reprocessing and ancillary knowledge

  15. Ventilation system for 99Mo production apparatus

    International Nuclear Information System (INIS)

    Izumo, Mishiroku; Okane, Shougo; Sorita, Takami; Aoyama, Saburou

    1978-04-01

    In production of 20 Ci 99 Mo from 235 U fission, about 120 Ci of radioiodine ( 131 I, 132 I, and 133 I) is involved. To remove airborne radioiodine from the exhaust air from production apparatus and minimize radioiodine release to the atmosphere, the ventilation system is equipped with 2 units of Model-FD charcoal filter (KI 3 -Impregnated charcoal 2 inch thick of Barnebey-Cheney Co.). From September 1976 to December 1977, 21 runs of 99 Mo production involving airborne radioiodine were carried out. The ventilation system was operated continuously for the whole 15 months period; variation in removal efficiency of airborne radioiodine from the exhaust air stream was observed. In the runs valuable experiences were gained in operation and maintenance of the ventilation system including activated charcoal filter and health-physics management of such facility. Following are the results: (1) Airborne radioiodine from 99 Mo production apparatus is reduced to 10 -3 % of the original quantity. (2) When the ventilation system is operated at a maximum air flow rate through the filter, the average efficiency during 15 months is over 98%. (3) Airborne radioiodine released from 99 Mo production apparatus to the ventilation system is less than 5% particulate iodine and alkyl iodines and more than 95% inorganic iodine. (4) Airborne radioiodine released from the stack is less than 28 μCi/run, which is below the limit in regulations on Radioisotope Production Laboratory. (auth.)

  16. Plant and safety system model

    International Nuclear Information System (INIS)

    Beltracchi, Leo

    1999-01-01

    The design and development of a digital computer-based safety system for a nuclear power plant is a complex process. The process of design and product development must result in a final product free of critical errors; operational safety of nuclear power plants must not be compromised. This paper focuses on the development of a safety system model to assist designers, developers, and regulators in establishing and evaluating requirements for a digital computer-based safety system. The model addresses hardware, software, and human elements for use in the requirements definition process. The purpose of the safety system model is to assist and serve as a guide to humans in the cognitive reasoning process of establishing requirements. The goals in the use of the model are to: (1) enhance the completeness of the requirements and (2) reduce the number of errors associated with the requirements definition phase of a project

  17. Effect of Inspection Policies and Residual Value of Collected Used Products: A Mathematical Model and Genetic Algorithm for a Closed-Loop Green Manufacturing System

    Directory of Open Access Journals (Sweden)

    Byung Duk Song

    2017-09-01

    Full Text Available In the green manufacturing system that pursues the reuse of used products, the residual value of collected used products (CUP hugely affects a variety of managerial decisions to construct profitable and environmental remanufacturing plans. This paper deals with a closed-loop green manufacturing system for companies which perform both manufacturing with raw materials and remanufacturing with collected used products (CUP. The amount of CUP is assumed as a function of buy-back cost while the quality level of CUP, which means the residual value, follows a known distribution. In addition, the remanufacturing cost can differ according to the quality of the CUP. Moreover, nowadays companies are subject to existing environment-related laws such as Extended Producer Responsibility (EPR. Therefore, a company should collect more used products than its obligatory take-back quota or face fines from the government for not meeting its quota. Through the development of mathematical models, two kinds of inspection policies are examined to validate the efficiency of two different operation processes. To find a managerial solution, a genetic algorithm is proposed and tested with numerical examples.

  18. Productivity raising approaches in the logistic production system

    Directory of Open Access Journals (Sweden)

    Miroslav Rakyta

    2001-01-01

    Full Text Available This paper deals with the productivity of the logistic production system. The aim is to define the intermediate state of the production machines and equipment (OOE, identification of the material flows, idle time and breakdown forecasting, with the following purchase of the required spare parts. The goal of the system is the satisfaction of the customer´s needs and the minimalisation of not fulfilling the required terms for delivery with simultaneous increasing of the logistic production system productivity.

  19. Analytical filtration model for nonlinear viscoplastic oil in the theory of oil production stimulation and heating of oil reservoir in a dual-well system

    Science.gov (United States)

    Ivanovich Astafev, Vladimir; Igorevich Gubanov, Sergey; Alexandrovna Olkhovskaya, Valeria; Mikhailovna Sylantyeva, Anastasia; Mikhailovich Zinovyev, Alexey

    2018-02-01

    Production of high-viscosity oil and design of field development systems for such oil is one of the most promising directions in the development of world oil industry. The ability of high-viscosity oil to show in filtration process properties typical for non-Newtonian systems is proven by experimental studies. Nonlinear relationship between the pressure gradient and the rate of oil flow is due to interaction of high-molecular substances, in particular, asphaltenes and tars that form a plastic structure in it. The authors of this article have used the analytical model of stationary influx of nonlinear viscoplastic oil to the well bottom in order to provide rationale for the intensifying impact on a reservoir. They also have analyzed the method of periodic heating of productive reservoir by means of dual-wells. The high-temperature source is placed at the bottom of the vertical well, very close to the reservoir; at the same time the side well, located outside the zone of expected rock damage, is used for production. Suggested method of systemic treatment of reservoirs with dual wells can be useful for small fields of high-viscosity oil. The effect is based on the opportunity to control the structural and mechanical properties of high-viscosity oil and to increase depletion of reserves.

  20. The Influence of Climate, Soil and Pasture Type on Productivity and Greenhouse Gas Emissions Intensity of Modeled Beef Cow-Calf Grazing Systems in Southern Australia

    Directory of Open Access Journals (Sweden)

    Richard J. Eckard

    2012-10-01

    Full Text Available A biophysical whole farm system model was used to simulate the interaction between the historical climate, soil and pasture type at sites in southern Australia and assess the balance between productivity and greenhouse gas emissions (expressed in carbon dioxide equivalents, CO2-eq. intensity of beef cow-calf grazing systems. Four sites were chosen to represent a range of climatic zones, soil and pasture types. Poorer feed quality and supply limited the annual carrying capacity of the kikuyu pasture compared to phalaris pastures, with an average long-term carrying capacity across sites estimated to be 0.6 to 0.9 cows/ha. A relative reduction in level of feed intake to productivity of calf live weight/ha at weaning by feeding supplementary feed reduced the average CO2-eq. emissions/kg calf live weight at weaning of cows on the kikuyu pasture (18.4 and 18.9 kg/kg with and without supplementation, respectively, whereas at the other sites studied an increase in intake level to productivity and emission intensity was seen (between 10.4 to 12.5 kg/kg without and with supplementary feed, respectively. Enteric fermentation and nitrous oxide emissions from denitrification were the main sources of annual variability in emissions intensity, particularly at the lower rainfall sites. Emissions per unit product of low input systems can be minimized by efficient utilization of pasture to maximize the annual turnoff of weaned calves and diluting resource input per unit product.

  1. Solar based hydrogen production systems

    CERN Document Server

    Dincer, Ibrahim

    2013-01-01

    This book provides a comprehensive analysis of various solar based hydrogen production systems. The book covers first-law (energy based) and second-law (exergy based) efficiencies and provides a comprehensive understanding of their implications. It will help minimize the widespread misuse of efficiencies among students and researchers in energy field by using an intuitive and unified approach for defining efficiencies. The book gives a clear understanding of the sustainability and environmental impact analysis of the above systems. The book will be particularly useful for a clear understanding

  2. Management systems in production operations

    International Nuclear Information System (INIS)

    Walters, K.B.; Henderson, G.

    1993-01-01

    The Cullen Enquiry into the Piper Alpha disaster in the U.K. North Sea recommended that an operator should formally present it's company Management System and demonstrate how safety is achieved throughout the life cycle of a platform, from design through operation to abandonment. Brunei Shell Petroleum has prepared a corporate level Safety Management System. As part of Safety Case work, the corporate system is being extended to include the development of specific Management Systems with particular emphasis on offshore production operations involving integrated oil and gas facilities. This paper will describe the development of Management Systems, which includes an intensive Business Process Analysis and will comment upon it's applicability and relationship to ISO 9000. The paper will further describe the applicability and benefits of Management Systems and offer guidance on required effort. The paper will conclude that development of structured Management Systems for safety critical business processes is worthwhile but prioritization of effort will be necessary. As such the full adoption of Management Systems will be directional in nature

  3. In vitro exposure systems and dosimetry assessment tools for inhaled tobacco products: Workshop proceedings, conclusions and paths forward for in vitro model use.

    Science.gov (United States)

    Behrsing, Holger; Hill, Erin; Raabe, Hans; Tice, Raymond; Fitzpatrick, Suzanne; Devlin, Robert; Pinkerton, Kent; Oberdörster, Günter; Wright, Chris; Wieczorek, Roman; Aufderheide, Michaela; Steiner, Sandro; Krebs, Tobias; Asgharian, Bahman; Corley, Richard; Oldham, Michael; Adamson, Jason; Li, Xiang; Rahman, Irfan; Grego, Sonia; Chu, Pei-Hsuan; McCullough, Shaun; Curren, Rodger

    2017-07-01

    In 2009, the passing of the Family Smoking Prevention and Tobacco Control Act facilitated the establishment of the FDA Center for Tobacco Products (CTP), and gave it regulatory authority over the marketing, manufacture and distribution of tobacco products, including those termed 'modified risk'. On 4-6 April 2016, the Institute for In Vitro Sciences, Inc. (IIVS) convened a workshop conference entitled, In Vitro Exposure Systems and Dosimetry Assessment Tools for Inhaled Tobacco Products, to bring together stakeholders representing regulatory agencies, academia and industry to address the research priorities articulated by the FDA CTP. Specific topics were covered to assess the status of current in vitro smoke and aerosol/vapour exposure systems, as well as the various approaches and challenges to quantifying the complex exposures in in vitro pulmonary models developed for evaluating adverse pulmonary events resulting from tobacco product exposures. The four core topics covered were: a) Tobacco Smoke and E-Cigarette Aerosols; b) Air-Liquid Interface-In Vitro Exposure Systems; c) Dosimetry Approaches for Particles and Vapours/In Vitro Dosimetry Determinations; and d) Exposure Microenvironment/Physiology of Cells. The 2.5-day workshop included presentations from 20 expert speakers, poster sessions, networking discussions, and breakout sessions which identified key findings and provided recommendations to advance these technologies. Here, we will report on the proceedings, recommendations, and outcome of the April 2016 technical workshop, including paths forward for developing and validating non-animal test methods for tobacco product smoke and next generation tobacco product aerosol/vapour exposures. With the recent FDA publication of the final deeming rule for the governance of tobacco products, there is an unprecedented necessity to evaluate a very large number of tobacco-based products and ingredients. The questionable relevance, high cost, and ethical

  4. Alternative methods of modeling wind generation using production costing models

    International Nuclear Information System (INIS)

    Milligan, M.R.; Pang, C.K.

    1996-08-01

    This paper examines the methods of incorporating wind generation in two production costing models: one is a load duration curve (LDC) based model and the other is a chronological-based model. These two models were used to evaluate the impacts of wind generation on two utility systems using actual collected wind data at two locations with high potential for wind generation. The results are sensitive to the selected wind data and the level of benefits of wind generation is sensitive to the load forecast. The total production cost over a year obtained by the chronological approach does not differ significantly from that of the LDC approach, though the chronological commitment of units is more realistic and more accurate. Chronological models provide the capability of answering important questions about wind resources which are difficult or impossible to address with LDC models

  5. A model for optimizing the production of pharmaceutical products

    Directory of Open Access Journals (Sweden)

    Nevena Gospodinova

    2017-05-01

    Full Text Available The problem associated with the optimal production planning is especially relevant in modern industrial enterprises. The most commonly used optimality criteria in this context are: maximizing the total profit; minimizing the cost per unit of production; maximizing the capacity utilization; minimizing the total production costs. This article aims to explore the possibility for optimizing the production of pharmaceutical products through the construction of a mathematical model that can be viewed in two ways – as a single-product model and a multi-product model. As an optimality criterion it is set the minimization of the cost per unit of production for a given planning period. The author proposes an analytical method for solving the nonlinear optimization problem. An optimal production plan of Tylosin tartrate is found using the single-product model.

  6. Global manure nitrogen production and application in cropland during 1860–2014: a 5 arcmin gridded global dataset for Earth system modeling

    Directory of Open Access Journals (Sweden)

    B. Zhang

    2017-09-01

    Full Text Available Given the important role of nitrogen input from livestock systems in terrestrial nutrient cycles and the atmospheric chemical composition, it is vital to have a robust estimation of the magnitude and spatiotemporal variation in manure nitrogen production and its application to cropland across the globe. In this study, we used the dataset from the Global Livestock Impact Mapping System (GLIMS in conjunction with country-specific annual livestock populations to reconstruct the manure nitrogen production during 1860–2014. The estimated manure nitrogen production increased from 21.4 Tg N yr−1 in 1860 to 131.0 Tg N yr−1 in 2014 with a significant annual increasing trend (0.7 Tg N yr−1, p < 0.01. Changes in manure nitrogen production exhibited high spatial variability and concentrated in several hotspots (e.g., Western Europe, India, northeastern China, and southeastern Australia across the globe over the study period. In the 1860s, the northern midlatitude region was the largest manure producer, accounting for ∼ 52 % of the global total, while low-latitude regions became the largest share (∼ 48 % in the most recent 5 years (2010–2014. Among all the continents, Asia accounted for over one-fourth of the global manure production during 1860–2014. Cattle dominated the manure nitrogen production and contributed ∼ 44 % of the total manure nitrogen production in 2014, followed by goats, sheep, swine, and chickens. The manure nitrogen application to cropland accounts for less than one-fifth of the total manure nitrogen production over the study period. The 5 arcmin gridded global dataset of manure nitrogen production generated from this study could be used as an input for global or regional land surface and ecosystem models to evaluate the impacts of manure nitrogen on key biogeochemical processes and water quality. To ensure food security and environmental sustainability, it is necessary to implement

  7. Chemical production processes and systems

    Science.gov (United States)

    Holladay, Johnathan E.; Muzatko, Danielle S.; White, James F.; Zacher, Alan H.

    2014-06-17

    Hydrogenolysis systems are provided that can include a reactor housing an Ru-comprising hydrogenolysis catalyst and wherein the contents of the reactor is maintained at a neutral or acidic pH. Reactant reservoirs within the system can include a polyhydric alcohol compound and a base, wherein a weight ratio of the base to the compound is less than 0.05. Systems also include the product reservoir comprising a hydrogenolyzed polyhydric alcohol compound and salts of organic acids, and wherein the moles of base are substantially equivalent to the moles of salts or organic acids. Processes are provided that can include an Ru-comprising catalyst within a mixture having a neutral or acidic pH. A weight ratio of the base to the compound can be between 0.01 and 0.05 during exposing.

  8. Ultra-Deepwater Production Systems

    Energy Technology Data Exchange (ETDEWEB)

    Ken L. Smith; Marc E. Leveque

    2005-05-31

    The report herein is a summary of the work performed on three projects to demonstrate hydrocarbon drilling and production methods applicable to deep and ultra deepwater field developments in the Gulf of Mexico and other like applications around the world. This work advances technology that could lead to more economic development and exploitation of reserves in ultra-deep water or remote areas. The first project is Subsea Processing. Its scope includes a review of the ''state of the art'' in subsea components to enable primary production process functions such as first stage liquids and gas separation, flow boosting, chemical treatment, flow metering, etc. These components are then combined to allow for the elimination of costly surface production facilities at the well site. A number of studies were then performed on proposed field development projects to validate the economic potential of this technology. The second project involved the design and testing of a light weight production riser made of composite material. The proposed design was to meet an actual Gulf of Mexico deepwater development project. The various engineering and testing work is reviewed, including test results. The third project described in this report encompasses the development and testing of a close tolerance liner drilling system, a new technology aimed at reducing deepwater drilling costs. The design and prototype testing in a test well are described in detail.

  9. Alignment of Product Models and Product State Models - Integration of the Product Lifecycle Phases

    DEFF Research Database (Denmark)

    Larsen, Michael Holm; Kirkby, Lars Phillip; Vesterager, Johan

    1999-01-01

    The purpose of this paper is to discuss the integration of the Product Model (PM) and the Product State Model (PCM). Focus is on information exchange from the PSM to the PM within the manufacturing of a single ship. The paper distinguishes between information and knowledge integration. The paper...

  10. Effects of beetroot (Beta vulgaris) preparations on the Maillard reaction products in milk and meat-protein model systems

    NARCIS (Netherlands)

    Rackauskienea, I.; Pukalskas, A.; Rimantas Venskutonis, P.; Fiore, A.M.; Troise, A.D.; Fogliano, V.

    2015-01-01

    The effects of beetroots (Beta vulgaris) on the formation of Maillard reaction (MR) products possessing health, nutritional and sensory implications were studied. The effect of dried beetroot juice on the formation of Ne-(carboxymethyl)lysine (CML) and Ne-(2-furoylmethyl)-L-lysine (furosine) was

  11. Modeling of System Families

    National Research Council Canada - National Science Library

    Feiler, Peter

    2007-01-01

    .... The Society of Automotive Engineers (SAE) Architecture Analysis & Design Language (AADL) is an industry-standard, architecture-modeling notation specifically designed to support a component- based approach to modeling embedded systems...

  12. Modelling Railway Interlocking Systems

    DEFF Research Database (Denmark)

    Lindegaard, Morten Peter; Viuf, P.; Haxthausen, Anne Elisabeth

    2000-01-01

    In this report we present a model of interlocking systems, and describe how the model may be validated by simulation. Station topologies are modelled by graphs in which the nodes denote track segments, and the edges denote connectivity for train traÆc. Points and signals are modelled by annotatio...

  13. development of an integrated production inventory model for a ...

    African Journals Online (AJOL)

    ... production inventory system is extended for non-instantaneous production and integrated with concept of inventory models with cost changes. Integer multiple parameters are used as a check factor for cost minimization. A numerical example is also presented. KeyWords Inventory, Production, Optimization, Modeling

  14. Infusion of Atmospheric Dust Model Outputs into a Public Health Decision Support System: The Integration of Open Geospatial Consortium Service Products Into the New Mexico Environmental Public Health Tracking System

    Science.gov (United States)

    Hudspeth, W. B.; Cavner, J. A.

    2009-12-01

    New Mexico's Environmental Public Health Tracking System (EPHTS), funded by the Centers for Disease Control (CDC) Environmental Public Health Tracking Network (EPHTN), aims to improve health awareness and services by linking health effects data with levels and frequency of environmental exposure. As a public health web-based decision-support system, EPHTS systems include: state-of-the-art statistical analysis tools; geospatial visualization tools; data discovery, extraction, and delivery tools; and environmental/public health linkage information. As part of its mandate, EPHTS issues public health advisories and forecasts of environmental conditions that have consequences for human health. Through a NASA-funded partnership between the University of New Mexico and the University of Arizona, efforts have been underway to infuse NASA Earth Science results, as well as meteorological forecast data, into two existing models (the Dust Regional Atmospheric Model (DREAM) and the Community Multiscale Air Quality (CMAQ) model) in order to improve forecasts of atmospheric dust, ozone, and aerosols. The goal of this work has been to develop services that can be integrated into existing public health decision support systems (DSS) to provide enhanced environmental data (i.e. ground surface particulate concentration estimates) for use in epidemiological analysis, public health warning systems, and syndromic surveillance systems. The results and products derived from the outputs of these models are made available to the New Mexico EPHTS. In particular, these products are integrated into existing clients within the larger framework of the EPHTS Service Oriented Architecture (SOA). The SOA can be described as an multi-tiered architecture of interacting services, each providing a specific function. They include SOAP (Simple Object Access Protocol) and OGC (Open Geospatial Consortium) services to deliver maps, data, and analytical capabilities. This paper reviews the SOA developed as

  15. Sustainable Industrial Product Systems. Integration of Life Cycle Assessment in Product development and Optimization of Product Systems

    Energy Technology Data Exchange (ETDEWEB)

    Hanssen, Ole Joergen

    1997-12-31

    This thesis contributes to the development and testing of environmental life cycle assessment (LCA) in product development and management in industry. It is based on systems theory and systems engineering. It develops a method for sustainable product development that has been successfully tested in the Nordic project called NEP. The LCA method is also a basis for an optimization model, where life cycle economy and environmental impacts from product systems are optimized with a non-linear model. A more complete mathematical model for LCA, based on the functional requirements on a product system, is also developed. The statistical properties of emission factors are studied using a data set from the Swedish Kraft Mill industry. It is shown that emission factors may be assumed constants in the LCA model, but with rather large variations within a population of Kraft mills. It is shown that there are a few environmental impacts which are important for most types of products under Scandinavian conditions, especially global warming potential, acidification, human toxicity and fossil energy depletion. There are significant differences between the contribution to these impacts from different life cycle stages, where raw material processing and use of products are generally more important than the other stages. Test cases indicate that there are no large conflicts between improvements in environmental impacts and customer requirements. Environmental improvements seem to increase purchase cost of products in some cases, but the life cycle cost of the products seem in most cases to be reduced. It is concluded that there are opportunities for 30-50% improvements in product system, based on relatively simple modifications of the systems. 246 refs., 63 figs., 19 tabs.

  16. Sterile Product Packaging and Delivery Systems.

    Science.gov (United States)

    Akers, Michael J

    2015-01-01

    Both conventional and more advanced product container and delivery systems are the focus of this brief article. Six different product container systems will be discussed, plus advances in primary packaging for special delivery systems and needle technology.

  17. Product Family Modelling for Manufacturing Planning

    DEFF Research Database (Denmark)

    Jørgensen, Kaj Asbjørn; Petersen, Thomas Ditlev; Nielsen, Kjeld

    2011-01-01

    dependent on the specific assembly structure of the configured product, i.e. the combination of modules. In this paper, issues of how to create manufacturing structures and related planning data in product family models are presented. Primarily, the more complicated multi-level manufacturing structures......To enable product configuration of a product family, it is important to develop a model of the selected product family. From such a model, an often performed practice is to make a product configurator from which customers can specify individual products from the family. To get further utilisation...... of the product family model, however, the model should be enriched with data for planning and execution of the manufacturing processes. The idea is that, when any individual product is specified using the product configurator, a product model can be extracted with all data necessary for planning...

  18. Modeling a Sustainable Salt Tolerant Grass-Livestock Production System under Saline Conditions in the Western San Joaquin Valley of California

    Directory of Open Access Journals (Sweden)

    Stephen R. Kaffka

    2013-09-01

    Full Text Available Salinity and trace mineral accumulation threaten the sustainability of crop production in many semi-arid parts of the world, including California’s western San Joaquin Valley (WSJV. We used data from a multi-year field-scale trial in Kings County and related container trials to simulate a forage-grazing system under saline conditions. The model uses rainfall and irrigation water amounts, irrigation water quality, soil, plant, and atmospheric variables to predict Bermuda grass (Cynodon dactylon (L. Pers. growth, quality, and use by cattle. Simulations based on field measurements and a related container study indicate that although soil chemical composition is affected by irrigation water quality, irrigation timing and frequency can be used to mitigate salt and trace mineral accumulation. Bermuda grass yields of up to 12 Mg dry matter (DM·ha−1 were observed at the field site and predicted by the model. Forage yield and quality supports un-supplemented cattle stocking rates of 1.0 to 1.2 animal units (AU·ha−1. However, a balance must be achieved between stocking rate, desired average daily gain, accumulation of salts in the soil profile, and potential pollution of ground water from drainage and leaching. Using available weather data, crop-specific parameter values and field scale measurements of soil salinity and nitrogen levels, the model can be used by farmers growing forages on saline soils elsewhere, to sustain forage and livestock production under similarly marginal conditions.

  19. Entropy Production in Convective Hydrothermal Systems

    Science.gov (United States)

    Boersing, Nele; Wellmann, Florian; Niederau, Jan

    2016-04-01

    Exploring hydrothermal reservoirs requires reliable estimates of subsurface temperatures to delineate favorable locations of boreholes. It is therefore of fundamental and practical importance to understand the thermodynamic behavior of the system in order to predict its performance with numerical studies. To this end, the thermodynamic measure of entropy production is considered as a useful abstraction tool to characterize the convective state of a system since it accounts for dissipative heat processes and gives insight into the system's average behavior in a statistical sense. Solving the underlying conservation principles of a convective hydrothermal system is sensitive to initial conditions and boundary conditions which in turn are prone to uncertain knowledge in subsurface parameters. There exist multiple numerical solutions to the mathematical description of a convective system and the prediction becomes even more challenging as the vigor of convection increases. Thus, the variety of possible modes contained in such highly non-linear problems needs to be quantified. A synthetic study is carried out to simulate fluid flow and heat transfer in a finite porous layer heated from below. Various two-dimensional models are created such that their corresponding Rayleigh numbers lie in a range from the sub-critical linear to the supercritical non-linear regime, that is purely conductive to convection-dominated systems. Entropy production is found to describe the transient evolution of convective processes fairly well and can be used to identify thermodynamic equilibrium. Additionally, varying the aspect ratio for each Rayleigh number shows that the variety of realized convection modes increases with both larger aspect ratio and higher Rayleigh number. This phenomenon is also reflected by an enlarged spread of entropy production for the realized modes. Consequently, the Rayleigh number can be correlated to the magnitude of entropy production. In cases of moderate

  20. Greenhouse production systems for people

    NARCIS (Netherlands)

    Giacomelli, G.A.; Sase, S.; Cramer, R.; Hoogeboom, J.; McKenzie, A.; Parbst, K.; Sacrascia-Mugnozza, G.; Selina, P.; Sharp, D.A.; Voogt, J.O.; Weel, van P.A.; Mears, D.

    2012-01-01

    Environmentally sound greenhouse production requires that: demand for market products is understood; greenhouse design addresses the climate circum-stances; input resources are available and consumed efficiently, and; there must be a reasonable balance of production products to the environmental

  1. The economic production lot size model with several production rates

    DEFF Research Database (Denmark)

    Larsen, Christian

    We study an extension of the economic production lot size model, where more than one production rate can be used during a cycle. The production rates and their corresponding runtimes are decision variables. We decompose the problem into two subproblems. First, we show that all production rates...

  2. Ultra-Deepwater Production Systems

    Energy Technology Data Exchange (ETDEWEB)

    K. L. Smith; M. E. Leveque

    2004-09-30

    This report includes technical progress made during the period October, 2003 through September, 2004. At the end of the last technical progress report, the subsea processing aspects of the work program had been dropped due to the lack of commercial opportunity within ConocoPhillips, and the program had been redirected towards two other promising deepwater technologies: the development and demonstration of a composite production riser, and the development and testing of a close-tolerance liner drilling system. This report focuses on these two technologies.

  3. A Genetic System for Clostridium ljungdahlii: a Chassis for Autotrophic Production of Biocommodities and a Model Homoacetogen

    Energy Technology Data Exchange (ETDEWEB)

    Leang, C; Ueki, T; Nevin, KP; Lovley, DR

    2013-02-04

    Methods for genetic manipulation of Clostridium ljungdahlii are of interest because of the potential for production of fuels and other biocommodities from carbon dioxide via microbial electrosynthesis or more traditional modes of autotrophy with hydrogen or carbon monoxide as the electron donor. Furthermore, acetogenesis plays an important role in the global carbon cycle. Gene deletion strategies required for physiological studies of C. ljungdahlii have not previously been demonstrated. An electroporation procedure for introducing plasmids was optimized, and four different replicative origins for plasmid propagation in C. ljungdahlii were identified. Chromosomal gene deletion via double-crossover homologous recombination with a suicide vector was demonstrated initially with deletion of the gene for FliA, a putative sigma factor involved in flagellar biogenesis and motility in C. ljungdahlii. Deletion of fliA yielded a strain that lacked flagella and was not motile. To evaluate the potential utility of gene deletions for functional genomic studies and to redirect carbon and electron flow, the genes for the putative bifunctional aldehyde/alcohol dehydrogenases, adhE1 and adhE2, were deleted individually or together. Deletion of adhE1, but not adhE2, diminished ethanol production with a corresponding carbon recovery in acetate. The double deletion mutant had a phenotype similar to that of the adhE1-deficient strain. Expression of adhE1 in trans partially restored the capacity for ethanol production. These results demonstrate the feasibility of genetic investigations of acetogen physiology and the potential for genetic manipulation of C. ljungdahlii to optimize autotrophic biocommodity production.

  4. A new approach for measuring the environmental sustainability of renewable energy production systems : Focused on the modelling of green gas production pathways

    NARCIS (Netherlands)

    Pierie, F.; Bekkering, J.; Benders, R. M. J.; van Gemert, W. J. Th; Moll, H. C.

    2016-01-01

    A transparent and comparable understanding of the energy efficiency, carbon footprint, and environmental impacts of renewable resources are required in the decision making and planning process towards a more sustainable energy system. Therefore, a new approach is proposed for measuring the

  5. Extending product modeling methods for integrated product development

    DEFF Research Database (Denmark)

    Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

    2013-01-01

    Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...

  6. A grand model for chemical product design

    DEFF Research Database (Denmark)

    Fung, Ka Y.; Ng, Ka M.; Zhang, Lei

    2016-01-01

    , ingredients and structure. Market and competitive analysis, government policies and regulations have to be explicitly considered in product design. All these considerations are accounted for in the Grand Product Design Model, which consists of a process model, a property model, a quality model, a cost model......Chemical engineering has been expanding its focus from primarily business-to-business products (B2B) to business-to-consumer (B2C) products. The production of B2B products generally emphasizes on process design and optimization, whereas the production of B2C products focuses on product quality...... product composition changes with market conditions. Another is a hand lotion that illustrates how product quality affects the profit.(C) 2016 Elsevier Ltd. All rights reserved....

  7. Modelling and using product architectures in mechatronic product development

    OpenAIRE

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik

    2012-01-01

    The objective for the paper is to determine the role of a product architecture modelling tool to support communication and to form the basis for developing and maintaining product structures for improving development practices of complex products. This paper contains descriptions, observations, and lessons learned from a case study in which the author tested a modelling tool to represent a product’s architecture during product development in a larger Danish company. The reasons leading to the...

  8. A Multilevel Design Model : The mutual relationship between product-service system development and societal change processes

    NARCIS (Netherlands)

    Joore, J.P.; Brezet, J.C.

    2014-01-01

    Change actors like designers play a strategic role in innovation and transition processes towards a sustainable society. They act at all levels of society and need help to find their way through increasingly interrelated innovation systems. To support their efforts, there is a need for a design

  9. Coordinated supply chain dynamic production planning model

    Science.gov (United States)

    Chandra, Charu; Grabis, Janis

    2001-10-01

    Coordination of different and often contradicting interests of individual supply chain members is one of the important issues in supply chain management because the individual members can not succeed without success of the supply chain and vice versa. This paper investigates a supply chain dynamic production planning problem with emphasis on coordination. A planning problem is formally described using a supply chain kernel, which defines supply chain configuration, management policies, available resources and objectives both at supply chain or macro and supply chain member or micro levels. The coordinated model is solved in order to balance decisions made at the macro and micro levels and members' profitability is used as the coordination criterion. The coordinated model is used to determine inventory levels and production capacity across the supply chain. Application of the coordinated model distributes costs burden uniformly among supply chain members and preserves overall efficiency of the supply chain. Influence of the demand series uncertainty is investigated. The production planning model is a part of the integrated supply chain decision modeling system, which is shared among the supply chain members across the Internet.

  10. Pebble Bed Reactor Dust Production Model

    Energy Technology Data Exchange (ETDEWEB)

    Abderrafi M. Ougouag; Joshua J. Cogliati

    2008-09-01

    The operation of pebble bed reactors, including fuel circulation, can generate graphite dust, which in turn could be a concern for internal components; and to the near field in the remote event of a break in the coolant circuits. The design of the reactor system must, therefore, take the dust into account and the operation must include contingencies for dust removal and for mitigation of potential releases. Such planning requires a proper assessment of the dust inventory. This paper presents a predictive model of dust generation in an operating pebble bed with recirculating fuel. In this preliminary work the production model is based on the use of the assumption of proportionality between the dust production and the normal force and distance traveled. The model developed in this work uses the slip distances and the inter-pebble forces computed by the authors’ PEBBLES. The code, based on the discrete element method, simulates the relevant static and kinetic friction interactions between the pebbles as well as the recirculation of the pebbles through the reactor vessel. The interaction between pebbles and walls of the reactor vat is treated using the same approach. The amount of dust produced is proportional to the wear coefficient for adhesive wear (taken from literature) and to the slip volume, the product of the contact area and the slip distance. The paper will compare the predicted volume with the measured production rates. The simulation tallies the dust production based on the location of creation. Two peak production zones from intra pebble forces are predicted within the bed. The first zone is located near the pebble inlet chute due to the speed of the dropping pebbles. The second peak zone occurs lower in the reactor with increased pebble contact force due to the weight of supported pebbles. This paper presents the first use of a Discrete Element Method simulation of pebble bed dust production.

  11. Sensorially important aldehyde production from amino acids in model wine systems: impact of ascorbic acid, erythorbic acid, glutathione and sulphur dioxide.

    Science.gov (United States)

    Grant-Preece, Paris; Fang, Hongjuan; Schmidtke, Leigh M; Clark, Andrew C

    2013-11-01

    The efficiency of different white wine antioxidant systems in preventing aldehyde production from amino acids by oxidative processes is not well understood. The aim of this study was to assess the efficiency of sulphur dioxide alone and in combination with either glutathione, ascorbic acid or its stereoisomer erythorbic acid, in preventing formation of the sensorially important compounds methional and phenylacetaldehyde from methionine and phenylalanine in model white wine. UHPLC, GC-MS/MS, LC-MS/MS, flow injection analysis and luminescence sensors determined both compositional changes during storage, and sulphur dioxide-aldehyde apparent equilibrium constants. Depending on temperature (25 or 45°C) or extent of oxygen supply, sulphur dioxide was equally or more efficient in impeding the production of methional compared to the other antioxidant systems. For phenylacetaldehyde, erythorbic acid or glutathione with sulphur dioxide provided improved inhibition compared to sulphur dioxide alone, in conditions of limited oxygen consumption. The results also demonstrate the extent to which sulphur dioxide addition can lower the free aldehyde concentrations to below their aroma thresholds. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. RSMASS system model development

    International Nuclear Information System (INIS)

    Marshall, A.C.; Gallup, D.R.

    1998-01-01

    RSMASS system mass models have been used for more than a decade to make rapid estimates of space reactor power system masses. This paper reviews the evolution of the RSMASS models and summarizes present capabilities. RSMASS has evolved from a simple model used to make rough estimates of space reactor and shield masses to a versatile space reactor power system model. RSMASS uses unique reactor and shield models that permit rapid mass optimization calculations for a variety of space reactor power and propulsion systems. The RSMASS-D upgrade of the original model includes algorithms for the balance of the power system, a number of reactor and shield modeling improvements, and an automatic mass optimization scheme. The RSMASS-D suite of codes cover a very broad range of reactor and power conversion system options as well as propulsion and bimodal reactor systems. Reactor choices include in-core and ex-core thermionic reactors, liquid metal cooled reactors, particle bed reactors, and prismatic configuration reactors. Power conversion options include thermoelectric, thermionic, Stirling, Brayton, and Rankine approaches. Program output includes all major component masses and dimensions, efficiencies, and a description of the design parameters for a mass optimized system. In the past, RSMASS has been used as an aid to identify and select promising concepts for space power applications. The RSMASS modeling approach has been demonstrated to be a valuable tool for guiding optimization of the power system design; consequently, the model is useful during system design and development as well as during the selection process. An improved in-core thermionic reactor system model RSMASS-T is now under development. The current development of the RSMASS-T code represents the next evolutionary stage of the RSMASS models. RSMASS-T includes many modeling improvements and is planned to be more user-friendly. RSMASS-T will be released as a fully documented, certified code at the end of

  13. Production Management System for AMS Computing Centres

    Science.gov (United States)

    Choutko, V.; Demakov, O.; Egorov, A.; Eline, A.; Shan, B. S.; Shi, R.

    2017-10-01

    The Alpha Magnetic Spectrometer [1] (AMS) has collected over 95 billion cosmic ray events since it was installed on the International Space Station (ISS) on May 19, 2011. To cope with enormous flux of events, AMS uses 12 computing centers in Europe, Asia and North America, which have different hardware and software configurations. The centers are participating in data reconstruction, Monte-Carlo (MC) simulation [2]/Data and MC production/as well as in physics analysis. Data production management system has been developed to facilitate data and MC production tasks in AMS computing centers, including job acquiring, submitting, monitoring, transferring, and accounting. It was designed to be modularized, light-weighted, and easy-to-be-deployed. The system is based on Deterministic Finite Automaton [3] model, and implemented by script languages, Python and Perl, and the built-in sqlite3 database on Linux operating systems. Different batch management systems, file system storage, and transferring protocols are supported. The details of the integration with Open Science Grid are presented as well.

  14. Systemic resilience model

    International Nuclear Information System (INIS)

    Lundberg, Jonas; Johansson, Björn JE

    2015-01-01

    It has been realized that resilience as a concept involves several contradictory definitions, both for instance resilience as agile adjustment and as robust resistance to situations. Our analysis of resilience concepts and models suggest that beyond simplistic definitions, it is possible to draw up a systemic resilience model (SyRes) that maintains these opposing characteristics without contradiction. We outline six functions in a systemic model, drawing primarily on resilience engineering, and disaster response: anticipation, monitoring, response, recovery, learning, and self-monitoring. The model consists of four areas: Event-based constraints, Functional Dependencies, Adaptive Capacity and Strategy. The paper describes dependencies between constraints, functions and strategies. We argue that models such as SyRes should be useful both for envisioning new resilience methods and metrics, as well as for engineering and evaluating resilient systems. - Highlights: • The SyRes model resolves contradictions between previous resilience definitions. • SyRes is a core model for envisioning and evaluating resilience metrics and models. • SyRes describes six functions in a systemic model. • They are anticipation, monitoring, response, recovery, learning, self-monitoring. • The model describes dependencies between constraints, functions and strategies

  15. Modeling Multi-Level Systems

    CERN Document Server

    Iordache, Octavian

    2011-01-01

    This book is devoted to modeling of multi-level complex systems, a challenging domain for engineers, researchers and entrepreneurs, confronted with the transition from learning and adaptability to evolvability and autonomy for technologies, devices and problem solving methods. Chapter 1 introduces the multi-scale and multi-level systems and highlights their presence in different domains of science and technology. Methodologies as, random systems, non-Archimedean analysis, category theory and specific techniques as model categorification and integrative closure, are presented in chapter 2. Chapters 3 and 4 describe polystochastic models, PSM, and their developments. Categorical formulation of integrative closure offers the general PSM framework which serves as a flexible guideline for a large variety of multi-level modeling problems. Focusing on chemical engineering, pharmaceutical and environmental case studies, the chapters 5 to 8 analyze mixing, turbulent dispersion and entropy production for multi-scale sy...

  16. Selected System Models

    Science.gov (United States)

    Schmidt-Eisenlohr, F.; Puñal, O.; Klagges, K.; Kirsche, M.

    Apart from the general issue of modeling the channel, the PHY and the MAC of wireless networks, there are specific modeling assumptions that are considered for different systems. In this chapter we consider three specific wireless standards and highlight modeling options for them. These are IEEE 802.11 (as example for wireless local area networks), IEEE 802.16 (as example for wireless metropolitan networks) and IEEE 802.15 (as example for body area networks). Each section on these three systems discusses also at the end a set of model implementations that are available today.

  17. Streamlining environmental product declarations: a stage model

    Science.gov (United States)

    Lefebvre, Elisabeth; Lefebvre, Louis A.; Talbot, Stephane; Le Hen, Gael

    2001-02-01

    General public environmental awareness and education is increasing, therefore stimulating the demand for reliable, objective and comparable information about products' environmental performances. The recently published standard series ISO 14040 and ISO 14025 are normalizing the preparation of Environmental Product Declarations (EPDs) containing comprehensive information relevant to a product's environmental impact during its life cycle. So far, only a few environmentally leading manufacturing organizations have experimented the preparation of EPDs (mostly from Europe), demonstrating its great potential as a marketing weapon. However the preparation of EPDs is a complex process, requiring collection and analysis of massive amounts of information coming from disparate sources (suppliers, sub-contractors, etc.). In a foreseeable future, the streamlining of the EPD preparation process will require product manufacturers to adapt their information systems (ERP, MES, SCADA) in order to make them capable of gathering, and transmitting the appropriate environmental information. It also requires strong functional integration all along the product supply chain in order to ensure that all the information is made available in a standardized and timely manner. The goal of the present paper is two fold: first to propose a transitional model towards green supply chain management and EPD preparation; second to identify key technologies and methodologies allowing to streamline the EPD process and subsequently the transition toward sustainable product development

  18. Simulated influence of postweaning production system on performance of different biological types of cattle: I. Estimation of model parameters.

    Science.gov (United States)

    Williams, C B; Bennett, G L; Keele, J W

    1995-03-01

    Breed parameters for a computer model that simulated differences in the composition of empty-body gain of beef cattle, resulting from differences in postweaning level of nutrition that are not associated with empty BW, were estimated for 17 biological types of cattle (steers from F1 crosses of 16 sire breeds [Hereford, Angus, Jersey, South Devon, Limousin, Simmental, Charolais, Red Poll, Brown Swiss, Gelbvieh, Maine Anjou, Chianina, Brahman, Sahiwal, Pinzgauer, and Tarentaise] mated to Hereford and Angus dams). One value for the maximum fractional growth rate of fat-free matter (KMAX) was estimated and used across all breed types. Mature fat-free matter (FFMmat) was estimated from data on mature cows for each of the 17 breed types. Breed type values for a fattening parameter (THETA) were estimated from growth and composition data at slaughter on steers of the 17 breed types, using the previously estimated constant KMAX and breed values for FFMmat. For each breed type, THETA values were unique for given values of KMAX, FFMmat, and composition at slaughter. The results showed that THETA was most sensitive to KMAX and had similar sensitivity to FFMmat and composition at slaughter. Values for THETA were most sensitive for breed types with large THETA values (Chianina, Charolais, and Limousin crossbred steers) and least sensitive for breed types with small THETA values (purebred Angus, crossbred Jersey, and Red Poll steers).(ABSTRACT TRUNCATED AT 250 WORDS)

  19. Kanban simulation model for production process optimization

    Directory of Open Access Journals (Sweden)

    Golchev Riste

    2015-01-01

    Full Text Available A long time has passed since the KANBAN system has been established as an efficient method for coping with the excessive inventory. Still, the possibilities for its improvement through its integration with other different approaches should be investigated further. The basic research challenge of this paper is to present benefits of KANBAN implementation supported with Discrete Event Simulation (DES. In that direction, at the beginning, the basics of KANBAN system are presented with emphasis on the information and material flow, together with a methodology for implementation of KANBAN system. Certain analysis on combining the simulation with this methodology is presented. The paper is concluded with a practical example which shows that through understanding the philosophy of the implementation methodology of KANBAN system and the simulation methodology, a simulation model can be created which can serve as a basis for a variety of experiments that can be conducted within a short period of time, resulting with production process optimization.

  20. A system for multiattribute drug product comparison.

    Science.gov (United States)

    Lambert, Bruce L; Yu, Clement; Thirumalai, Mohanraj

    2004-02-01

    We describe a system for multiattribute drug product searching. We then demonstrate the system's performance on sample queries, and evaluate the name-based similarity searching component. Ten drug names were used to query a database of existing drug names using five different retrieval methods. Retrieved names were merged into master lists and presented to 15 pharmacists. Pharmacists rated the similarity between the query name and each retrieved names on a scale of 1-5. We report the precision of our five different retrieval methods at 11 levels of recall. The best single measure was editex, with a precision of 17.4% averaged across 11 levels of recall. A regression model using four objective measures of similarity as predictors accounted for 40.6% of the variance in observed mean similarity ratings. Automated, multiattribute drug product searching may improve the effectiveness and efficiency of preapproval screening processes and thereby prevent medication errors.

  1. Application of a software system of finite-element analysis ANSYS for computer modelling of cylindrical products stress state at exposure to local heat sources

    Directory of Open Access Journals (Sweden)

    Сергій Володимирович Гулаков

    2015-11-01

    Full Text Available Developing manufacturing techniques of compound items it is necessary to consider the factors influencing the distribution of welding stresses resulting from local heating source in the considered conjugation interface under consideration and the nature of the changes in it. Using real products in research results in high financial and energy costs as well as possible crashes. Distribution of heat when exposed to a local heating source as well as structural, phase, chemical transformations and other technological factors can be thoroughly studied at simulating materials and processes models. The purpose of this modeling is to develop methodology for calculating the stress-strain state of compound parts structure under the influence of a local heating source using numerical finite element method (FEM. This is accomplished using numerical simulation algorithms, that is the finite element method as the most powerful and functional means of numerical analysis in a wide variety of engineering problems. Classic FEM algorithm is implemented in several steps: sampling the area under consideration, the choice of the variational principle for determining the basic unknown functions, the choice of approximating functions, the implementation of the variational principle, the introduction of boundary conditions, solution of algebraic equations using standard numerical methods. After determining the nodal displacements in accordance with the known theory of elasticity ratios the strain and stress state is calculated. Using finite-element calculations ANSYS system a method that makes it possible to perform with great efficiency modeling the stress-strain state of structural components and to predict the distribution of strains in order to ensure conditions of regulated assembling of compound products

  2. Modeling cellular systems

    CERN Document Server

    Matthäus, Franziska; Pahle, Jürgen

    2017-01-01

    This contributed volume comprises research articles and reviews on topics connected to the mathematical modeling of cellular systems. These contributions cover signaling pathways, stochastic effects, cell motility and mechanics, pattern formation processes, as well as multi-scale approaches. All authors attended the workshop on "Modeling Cellular Systems" which took place in Heidelberg in October 2014. The target audience primarily comprises researchers and experts in the field, but the book may also be beneficial for graduate students.

  3. Product Configuration Systems - Implications for Product Innovation and Development

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

  4. Modeling Consumer Learning from Online Product Reviews

    OpenAIRE

    Yi Zhao; Sha Yang; Vishal Narayan; Ying Zhao

    2013-01-01

    We propose a structural model to study the effect of online product reviews on consumer purchases of experiential products. Such purchases are characterized by limited repeat purchase behavior of the same product item (such as a book title) but significant past usage experience with other products of the same type (such as books of the same genre). To cope with the uncertainty in quality of the product item, we posit that consumers may learn from their experience with the same type of product...

  5. Models for multimegawatt space power systems

    Energy Technology Data Exchange (ETDEWEB)

    Edenburn, M.W.

    1990-06-01

    This report describes models for multimegawatt, space power systems which Sandia's Advanced Power Systems Division has constructed to help evaluate space power systems for SDI's Space Power Office. Five system models and models for associated components are presented for both open (power system waste products are exhausted into space) and closed (no waste products) systems: open, burst mode, hydrogen cooled nuclear reactor -- turboalternator system; open, hydrogen-oxygen combustion turboalternator system; closed, nuclear reactor powered Brayton cycle system; closed, liquid metal Rankine cycle system; and closed, in-core, reactor therminonic system. The models estimate performance and mass for the components in each of these systems. 17 refs., 8 figs., 15 tabs.

  6. Pesticide Product Information System (PPIS)

    Science.gov (United States)

    PPIS includes registrant name and address, chemical ingredients, toxicity category, product names, distributor brand names, site/pest uses, pesticidal type, formulation code, and registration status for all products registered in the U.S.

  7. Testing Software Development Project Productivity Model

    Science.gov (United States)

    Lipkin, Ilya

    Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control

  8. Metabolic Engineering of the Regulators in Nitrogen Catabolite Repression To Reduce the Production of Ethyl Carbamate in a Model Rice Wine System

    Science.gov (United States)

    Zhao, Xinrui; Zou, Huijun; Fu, Jianwei; Chen, Jian

    2014-01-01

    Rice wine has been one of the most popular traditional alcoholic drinks in China. However, the presence of potentially carcinogenic ethyl carbamate (EC) in rice wine has raised a series of food safety issues. During rice wine production, the key reason for EC formation is urea accumulation, which occurs because of nitrogen catabolite repression (NCR) in Saccharomyces cerevisiae. NCR represses urea utilization by retaining Gln3p in the cytoplasm when preferred nitrogen sources are present. In order to increase the nuclear localization of Gln3p, some possible phosphorylation sites on the nuclear localization signal were mutated and the nuclear localization regulation signal was truncated, and the disruption of URE2 provided an additional method of reducing urea accumulation. By combining these strategies, the genes involved in urea utilization (DUR1,2 and DUR3) could be significantly activated in the presence of glutamine. During shake flask fermentations of the genetically modified strains, very little urea accumulated in the medium. Furthermore, the concentrations of urea and EC were reduced by 63% and 72%, respectively, in a model rice wine system. Examination of the normal nutrients in rice wine indicated that there were few differences in fermentation characteristics between the wild-type strain and the genetically modified strain. These results show that metabolic engineering of the NCR regulators has great potential as a method for eliminating EC during rice wine production. PMID:24185848

  9. A novel mathematical model for a multi-period, multi-product optimal ordering problem considering expiry dates in a FEFO system

    DEFF Research Database (Denmark)

    Sazvar, Z.; Mirzapour Al-e-hashem, S. M J; Govindan, K.

    2016-01-01

    One of the main challenges of retail units is to determine the order quantities of different types of products, each with a specific expiry date, so that the system cost including shortage cost is minimized. We study a new multi-product multi-period replenishment problem for a First Expired-First...

  10. Design models in the development of mechatronic products

    DEFF Research Database (Denmark)

    Habib, Tufail; Brunø, Thomas Ditlev; Nielsen, Kjeld

    2012-01-01

    In view of widespread application of mechatronic systems and the competition to offer customized products at high quality and low cost, there has been considerable attention to introduce new methods and models in this regard. This paper explores design process of mechatronic product development...... with the aid of models. The role of software not only as part of the product but also in the development process. These models contribute to product structuring and evaluation of design process by reducing the complexity and their use for product customization....

  11. Observed benefits from product configuration systems

    DEFF Research Database (Denmark)

    Hvam, Lars; Haug, Anders; Mortensen, Niels Henrik

    2013-01-01

    This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...... affected by the use of product configu-ration systems e.g. increased sales, decrease in the number of SKU's, improved ability to introduce new products, and cost reductions....

  12. Estimating New Product Success with the Use of Intelligent Systems

    Directory of Open Access Journals (Sweden)

    Relich Marcin

    2014-12-01

    Full Text Available The paper presents identifying success factors in new product development and selecting new product portfolio. The critical success factors are identified on the basis of an enterprise system, including the fields of project management, marketing and customer’s comments concerning the previous products. The model of measuring the success of a product includes the indicators such as duration and cost of product development, and net profit from a product. The proposed methodology is based on identification of the relationships between product success and project environment parameters with the use of artificial neural networks and fuzzy neural system that is compared with the results from linear model. The presented method contains the stages of knowledge discovery process such as data selection, data preprocessing, and data mining in the context of an enterprise resource planning system database. The illustrative example enhances a performance comparison of intelligent systems in the context of data preprocessing.

  13. Modelling shape distortions in composite products

    NARCIS (Netherlands)

    Lamers, E.A.D.; Wijskamp, Sebastiaan; Akkerman, Remko; Storen, A.

    2004-01-01

    Shape distortions often occur after the forming of woven fabric reinforced composite products. The thermomechanical behaviour of the product must be known in order to predict these product distortions. A two-step strategy is proposed to model the thermomechanical behaviour of a product. First, the

  14. Product with service, technology with business model

    DEFF Research Database (Denmark)

    Sakao, Tomohiko; McAloone, Tim C.

    2011-01-01

    Looking back over the last decade, the importance of an expanded understanding of engineering design has been shared within the engineering design community. Presented concepts and methods to support such expansion include Functional Product Development, Service Engineering, and Product/Service-S...... promising concept beyond PSS design; via an integrated development of technology and business model. This can be of particular interest for further research, especially due to its high freedom for designers.......Looking back over the last decade, the importance of an expanded understanding of engineering design has been shared within the engineering design community. Presented concepts and methods to support such expansion include Functional Product Development, Service Engineering, and Product....../Service-Systems (PSS) design. This paper first explains PSS design as a type of an expansion of the engineering design of a physical product. Secondly, it gives a review of PSS research and a projection of future research issues, also ranging out into untraditional fields of research. Finally, it presents a new...

  15. Proactive Modeling of Market, Product and Production Architectures

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hansen, Christian Lindschou; Hvam, Lars

    2011-01-01

    This paper presents an operational model that allows description of market, products and production architectures. The main feature of this model is the ability to describe both structural and functional aspect of architectures. The structural aspect is an answer to the question: What constitutes...... the architecture, e.g. standard designs, design units and interfaces? The functional aspect is an answer to the question: What is the behaviour or the architecture, what is it able to do, i.e. which products at which performance levels can be derived from the architecture? Among the most important benefits...... of this model is the explicit ability to describe what the architecture is prepared for, and what it is not prepared for - concerning development of future derivative products. The model has been applied in a large scale global product development project. Among the most important benefits is contribution to...

  16. An Optimization Model for Product Placement on Product Listing Pages

    Directory of Open Access Journals (Sweden)

    Yan-Kwang Chen

    2014-01-01

    Full Text Available The design of product listing pages is a key component of Website design because it has significant influence on the sales volume on a Website. This study focuses on product placement in designing product listing pages. Product placement concerns how venders of online stores place their products over the product listing pages for maximization of profit. This problem is very similar to the offline shelf management problem. Since product information sources on a Web page are typically communicated through the text and image, visual stimuli such as color, shape, size, and spatial arrangement often have an effect on the visual attention of online shoppers and, in turn, influence their eventual purchase decisions. In view of the above, this study synthesizes the visual attention literature and theory of shelf-space allocation to develop a mathematical programming model with genetic algorithms for finding optimal solutions to the focused issue. The validity of the model is illustrated with example problems.

  17. Modelling of wastewater systems

    DEFF Research Database (Denmark)

    Bechmann, Henrik

    Oxygen Demand) flux and SS flux in the inlet to the WWTP. COD is measured by means of a UV absorption sensor while SS is measured by a turbidity sensor. These models include a description of the deposit of COD and SS amounts, respectively, in the sewer system, and the models can thus be used to quantify......In this thesis, models of pollution fluxes in the inlet to 2 Danish wastewater treatment plants (WWTPs) as well as of suspended solids (SS) concentrations in the aeration tanks of an alternating WWTP and in the effluent from the aeration tanks are developed. The latter model is furthermore used...... to analyze and quantify the effect of the Aeration Tank Settling (ATS) operating mode, which is used during rain events. Furthermore, the model is used to propose a control algorithm for the phase lengths during ATS operation. The models are mainly formulated as state space model in continuous time...

  18. Towards Optimization of Cyclic Production Systems

    OpenAIRE

    Chauvet, Fabrice; Herrmann, Jeffrey W.; Proth, Jean-Marie

    1999-01-01

    In this paper, the expression "production systems" refers to flow-shops, job-shops, assembly systems, Kanban systems and, in general, to any Discrete Event System (DES) which transforms raw material and/or components into products and/or components. Such a system is said to be cyclic if it provides indefinitely the same sequence of products. A schedule of a cyclic production system is defined as soon as the starting time of each operation on the related resource is known. It has been showed t...

  19. Architecture of the Product State Model Environment

    DEFF Research Database (Denmark)

    Holm Larsen, Michael; Lynggaard, Hans Jørgen B.

    2003-01-01

    This paper addresses the issue of using product models to support product lifecycle activities withparticular focus on the production phase. The motivation of the research is that products are producedmore costly and with longer lead-time than necessary.The paper provides a review of product...... modelling technologies and approaches, and the overallarchitecture for the Product State Model (PSM) Environment as a basis for quality monitoring.Especially, the paper focuses on the circumstances prevailing in a one-of-a-kind manufacturingenvironment like the shipbuilding industry, where product modelling...... technologies already haveproved their worth in the design and engineering phases of shipbuilding and in the operation phase.However, the handling of product information on the shop floor is not yet equally developed.The paper reports from the Brite-Euram project (No. BE97-4510) QualiGlobe focusing...

  20. BOREAS TE-17 Production Efficiency Model Images

    Data.gov (United States)

    National Aeronautics and Space Administration — A BOREAS version of the Global Production Efficiency Model(www.inform.umd.edu/glopem) was developed by TE-17 to generate maps of gross and net primary production,...

  1. Modeling of Kefir Production with Fuzzy Logic

    Directory of Open Access Journals (Sweden)

    Hüseyin Nail Akgül

    2014-06-01

    Full Text Available The fermentation is ended with pH 4.6 values in industrial production of kefir. In this study, the incubation temperature, the incubation time and inoculums of culture were chose as variable parameters of kefir. In conventional control systems, the value of pH can be found by trial method. In these systems, if the number of input parameters is greater, the method of trial and error creates a system dependent on the person as well as troublesome. Fuzzy logic can be used in such cases. Modeling studies with this fuzzy logic control are examined in two portions. The first part consists of fuzzy rules and membership functions, while the second part consists of clarify. Kefir incubation temperature between 20 and 25°C, the incubation period between 18 to 22 hours and the inoculum ratio of culture between 1-5% are selected for optimum production conditions. Three separate fuzzy sets (triangular membership function are used to blur the incubation temperature, the incubation time and the inoculum ratio of culture. Because the membership function numbers belonging to the the input parameters are 3 units, 3x3x3=27 line rule is obtained by multiplying these numbers. The table of fuzzy rules was obtained using the method of Mamdani. The membership function values were determined by the method of average weight using three trapezoidal area of membership functions created for clarification. The success of the system will be found, comparing the numerical values obtained with pH values that should be. Eventually, to achieve the desired pH value of 4.6 in the production of kefir, with the using of fuzzy logic, the workload of people will be decreased and the productivity of business can be increased. In this case, it can be provided savings in both cost and time.

  2. Production System Design for Multiple Brands

    DEFF Research Database (Denmark)

    Karlsson, Christer; Christensen, Irene

    Production systems enabling both cost efficiency and flexibility in terms of high product variation are explored. The study follows an explorative longitudinal field study approach. The database consists of three large global corporations, each consisting of several companies producing household ......-outs, worker skills, integration of distribution channels, after sales service and degree of servitization. Three production system design principles called VXY emerge....

  3. Production System Design for Multiple Brands

    DEFF Research Database (Denmark)

    Karlsson, Christer; Christensen, Irene

    appliances, cars, and trucks but also other products. An important denominator for the production system design is flow structures. Important dependent factors come from brand distinction, architectural characteristics, technology levels, supplier competence, process choice, process flow patterns, lay......-outs, worker skills, integration of distribution channels, after sales service and degree of servitization. Three production system design principles called VXY emerge....

  4. Modeling Complex Systems

    CERN Document Server

    Boccara, Nino

    2010-01-01

    Modeling Complex Systems, 2nd Edition, explores the process of modeling complex systems, providing examples from such diverse fields as ecology, epidemiology, sociology, seismology, and economics. It illustrates how models of complex systems are built and provides indispensable mathematical tools for studying their dynamics. This vital introductory text is useful for advanced undergraduate students in various scientific disciplines, and serves as an important reference book for graduate students and young researchers. This enhanced second edition includes: . -recent research results and bibliographic references -extra footnotes which provide biographical information on cited scientists who have made significant contributions to the field -new and improved worked-out examples to aid a student’s comprehension of the content -exercises to challenge the reader and complement the material Nino Boccara is also the author of Essentials of Mathematica: With Applications to Mathematics and Physics (Springer, 2007).

  5. Product/Service-System Development

    DEFF Research Database (Denmark)

    Tan, Adrian; McAloone, Timothy Charles; Gall, Catherine

    2007-01-01

    Product/service-systems’ (PSS) are innovation strategies where instead of focusing on the value of selling physical products, one focuses on the value of the utility of products and services throughout the product’s life period. This approach enables companies to provide customers with offerings...... that continuously deliver value and create a strong competitive advantage. PSS attempts to transcend the old industrial credo that value is embedded in products and the consideration of ‘cost-quality-time’ relates to the physical artefact. While there is increasing interest in PSS, limited research has been done...... in the design and development aspects of PSS. The objective of this paper is to explore how a global manufacturing company is developing an offering to their customers that is focused on the utility of their products throughout their life time. The paper describes the process of how a company is shifting from...

  6. Modeling Complex Systems

    International Nuclear Information System (INIS)

    Schreckenberg, M

    2004-01-01

    This book by Nino Boccara presents a compilation of model systems commonly termed as 'complex'. It starts with a definition of the systems under consideration and how to build up a model to describe the complex dynamics. The subsequent chapters are devoted to various categories of mean-field type models (differential and recurrence equations, chaos) and of agent-based models (cellular automata, networks and power-law distributions). Each chapter is supplemented by a number of exercises and their solutions. The table of contents looks a little arbitrary but the author took the most prominent model systems investigated over the years (and up until now there has been no unified theory covering the various aspects of complex dynamics). The model systems are explained by looking at a number of applications in various fields. The book is written as a textbook for interested students as well as serving as a comprehensive reference for experts. It is an ideal source for topics to be presented in a lecture on dynamics of complex systems. This is the first book on this 'wide' topic and I have long awaited such a book (in fact I planned to write it myself but this is much better than I could ever have written it!). Only section 6 on cellular automata is a little too limited to the author's point of view and one would have expected more about the famous Domany-Kinzel model (and more accurate citation!). In my opinion this is one of the best textbooks published during the last decade and even experts can learn a lot from it. Hopefully there will be an actualization after, say, five years since this field is growing so quickly. The price is too high for students but this, unfortunately, is the normal case today. Nevertheless I think it will be a great success! (book review)

  7. Modernizing the Regulatory System for Biotechnology Products

    Science.gov (United States)

    This Web page describes the continuing effort to modernize the federal regulatory system for biotechnology products as well as clarify various roles of EPA, FDA and USDA in evaluating new biotechnology products.

  8. A model for implementation of HACCP system for prevention and control of mycotoxins during the production of red dried chili pepper

    Directory of Open Access Journals (Sweden)

    Sebnem OZTURKOGLU-BUDAK

    Full Text Available Abstract Hazard analysis and critical control points (HACCP is a process control system describes the potential hazards during food production flow chart. In contrast to the conventional way of ensuring product safety by end-product testing, HACCP establishes control systems, focuses mainly on preventive measures. Quality of red dried chili pepper (RDCP should be assured by taking special care from harvesting of the peppers to retailing of the packaged product. RDCP is susceptible to fungi growth and mycotoxin contamination depending on the atmospheric and processing conditions such as humidity, temperature, storage and drying. Mycotoxins, are toxic metabolites to human health and strict control measures are required for preventing their occurrence in RDCP. In this study, HACCP system was implemented during the production of RDCP to ensure the food safety and quality characteristics of products and to expand the market. The most important critical control points (CCPs during the production of RDCP was determined as sorting and drying. It is evident that development and use of the GMP, GAP, GSP and hygienic rules as well as HACCP during handling and processing of dry chili pepper are a must for processing plants.

  9. Modeling the earth system

    Energy Technology Data Exchange (ETDEWEB)

    Ojima, D. [ed.

    1992-12-31

    The 1990 Global Change Institute (GCI) on Earth System Modeling is the third of a series organized by the Office for Interdisciplinary Earth Studies to look in depth at particular issues critical to developing a better understanding of the earth system. The 1990 GCI on Earth System Modeling was organized around three themes: defining critical gaps in the knowledge of the earth system, developing simplified working models, and validating comprehensive system models. This book is divided into three sections that reflect these themes. Each section begins with a set of background papers offering a brief tutorial on the subject, followed by working group reports developed during the institute. These reports summarize the joint ideas and recommendations of the participants and bring to bear the interdisciplinary perspective that imbued the institute. Since the conclusion of the 1990 Global Change Institute, research programs, nationally and internationally, have moved forward to implement a number of the recommendations made at the institute, and many of the participants have maintained collegial interactions to develop research projects addressing the needs identified during the two weeks in Snowmass.

  10. Generic modeling propositions for configuring, sale, product and production

    OpenAIRE

    Zhang , L.; Vareilles , Élise; Aldanondo , Michel; Helo , P.

    2012-01-01

    IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), HONG KONG, DEC 10-13, 2012; International audience; Facilitating product customization, configuration has attracted much attention from both academia and industry alike. However, the available studies and the reported systems focus on sales or product configuration while leaving other important issues in developing customized products unaddressed. In this study, we propose a new configuration concept: i...

  11. Developing and promoting OKP production system: a JIT production planning approach

    Science.gov (United States)

    Samavati, Mehran

    2011-10-01

    The role of production in competitive system of market on one hand and the changing conditions of market on the other hand has caused the need for more developed planning in such environments. The general purpose of the present research is to realize One-of- a- Kind- Product model (OKP) that is developed in two stages. In OKP model presented in 1994 only one sample of each product is produced and only one production method is considered for each product. In order to make OKP model more real and to use it in promoting more production methods, the following developments were made in this research: 1-First Development: Considering various methods for producing each product. 2-Second Development: Producing more than one sample of each product, while considering various production methods for each product. These models promoted OKP model of 1994. They can be used in more diversified production methods in order to promote them. In present model, while describing the main OKP model new models are provided as well. The significance of OKP has been described in Introduction

  12. NOAA Soil Moisture Products System (SMOPS) Daily Blended Products

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Soil Moisture Operational Products System (SMOPS) combines soil moisture retrievals from multiple satellite sensors to provide a global soil moisture map with...

  13. Robust Medical Isotope Production System

    Energy Technology Data Exchange (ETDEWEB)

    Klein, Steven Karl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kimpland, Robert Herbert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-06-15

    The success of this theoretical undertaking provided confidence that the behavior of new and evolving designs of fissile solution systems may be accurately estimated. Scaled up versions of SUPO, subcritical acceleratordriven systems, and other evolutionary designs have been examined.

  14. TESS Ground System Operations and Data Products

    Science.gov (United States)

    Glidden, Ana; Guerrero, Natalia; Fausnaugh, Michael; TESS Team

    2018-01-01

    We describe the ground system operations for processing data from the Transiting Exoplanet Survey Satellite (TESS), highlighting the role of the Science Operations Center (SOC). TESS is a spaced-based (nearly) all-sky mission, designed to find small planets around nearby bright stars using the transit method. We detail the flow of data from pixel measurements on the instrument to final products available at the Mikulski Archive for Space Telescopes (MAST). The ground system relies on a host of players to process the data, including the Payload Operations Center at MIT, the Science Processing Operation Center at NASA Ames, and the TESS Science Office, led by the Harvard-Smithsonian Center for Astrophysics and MIT. Together, these groups will deliver TESS Input Catalog, instrument calibration models, calibrated target pixels and full frame images, threshold crossing event reports, two-minute light curves, and the TESS Objects of Interest List.

  15. Modeling the potential effects of new tobacco products and policies: a dynamic population model for multiple product use and harm.

    Directory of Open Access Journals (Sweden)

    Eric D Vugrin

    Full Text Available Recent declines in US cigarette smoking prevalence have coincided with increases in use of other tobacco products. Multiple product tobacco models can help assess the population health impacts associated with use of a wide range of tobacco products.We present a multi-state, dynamical systems population structure model that can be used to assess the effects of tobacco product use behaviors on population health. The model incorporates transition behaviors, such as initiation, cessation, switching, and dual use, related to the use of multiple products. The model tracks product use prevalence and mortality attributable to tobacco use for the overall population and by sex and age group. The model can also be used to estimate differences in these outcomes between scenarios by varying input parameter values. We demonstrate model capabilities by projecting future cigarette smoking prevalence and smoking-attributable mortality and then simulating the effects of introduction of a hypothetical new lower-risk tobacco product under a variety of assumptions about product use. Sensitivity analyses were conducted to examine the range of population impacts that could occur due to differences in input values for product use and risk. We demonstrate that potential benefits from cigarette smokers switching to the lower-risk product can be offset over time through increased initiation of this product. Model results show that population health benefits are particularly sensitive to product risks and initiation, switching, and dual use behaviors.Our model incorporates the variety of tobacco use behaviors and risks that occur with multiple products. As such, it can evaluate the population health impacts associated with the introduction of new tobacco products or policies that may result in product switching or dual use. Further model development will include refinement of data inputs for non-cigarette tobacco products and inclusion of health outcomes such as morbidity

  16. Modeling the Potential Effects of New Tobacco Products and Policies: A Dynamic Population Model for Multiple Product Use and Harm

    Science.gov (United States)

    Vugrin, Eric D.; Rostron, Brian L.; Verzi, Stephen J.; Brodsky, Nancy S.; Brown, Theresa J.; Choiniere, Conrad J.; Coleman, Blair N.; Paredes, Antonio; Apelberg, Benjamin J.

    2015-01-01

    Background Recent declines in US cigarette smoking prevalence have coincided with increases in use of other tobacco products. Multiple product tobacco models can help assess the population health impacts associated with use of a wide range of tobacco products. Methods and Findings We present a multi-state, dynamical systems population structure model that can be used to assess the effects of tobacco product use behaviors on population health. The model incorporates transition behaviors, such as initiation, cessation, switching, and dual use, related to the use of multiple products. The model tracks product use prevalence and mortality attributable to tobacco use for the overall population and by sex and age group. The model can also be used to estimate differences in these outcomes between scenarios by varying input parameter values. We demonstrate model capabilities by projecting future cigarette smoking prevalence and smoking-attributable mortality and then simulating the effects of introduction of a hypothetical new lower-risk tobacco product under a variety of assumptions about product use. Sensitivity analyses were conducted to examine the range of population impacts that could occur due to differences in input values for product use and risk. We demonstrate that potential benefits from cigarette smokers switching to the lower-risk product can be offset over time through increased initiation of this product. Model results show that population health benefits are particularly sensitive to product risks and initiation, switching, and dual use behaviors. Conclusion Our model incorporates the variety of tobacco use behaviors and risks that occur with multiple products. As such, it can evaluate the population health impacts associated with the introduction of new tobacco products or policies that may result in product switching or dual use. Further model development will include refinement of data inputs for non-cigarette tobacco products and inclusion of health

  17. Modeling the potential effects of new tobacco products and policies: a dynamic population model for multiple product use and harm.

    Science.gov (United States)

    Vugrin, Eric D; Rostron, Brian L; Verzi, Stephen J; Brodsky, Nancy S; Brown, Theresa J; Choiniere, Conrad J; Coleman, Blair N; Paredes, Antonio; Apelberg, Benjamin J

    2015-01-01

    Recent declines in US cigarette smoking prevalence have coincided with increases in use of other tobacco products. Multiple product tobacco models can help assess the population health impacts associated with use of a wide range of tobacco products. We present a multi-state, dynamical systems population structure model that can be used to assess the effects of tobacco product use behaviors on population health. The model incorporates transition behaviors, such as initiation, cessation, switching, and dual use, related to the use of multiple products. The model tracks product use prevalence and mortality attributable to tobacco use for the overall population and by sex and age group. The model can also be used to estimate differences in these outcomes between scenarios by varying input parameter values. We demonstrate model capabilities by projecting future cigarette smoking prevalence and smoking-attributable mortality and then simulating the effects of introduction of a hypothetical new lower-risk tobacco product under a variety of assumptions about product use. Sensitivity analyses were conducted to examine the range of population impacts that could occur due to differences in input values for product use and risk. We demonstrate that potential benefits from cigarette smokers switching to the lower-risk product can be offset over time through increased initiation of this product. Model results show that population health benefits are particularly sensitive to product risks and initiation, switching, and dual use behaviors. Our model incorporates the variety of tobacco use behaviors and risks that occur with multiple products. As such, it can evaluate the population health impacts associated with the introduction of new tobacco products or policies that may result in product switching or dual use. Further model development will include refinement of data inputs for non-cigarette tobacco products and inclusion of health outcomes such as morbidity and disability.

  18. Marketing Modeling for New Products

    NARCIS (Netherlands)

    C. Hernández-Mireles (Carlos)

    2010-01-01

    textabstractThis thesis addresses the analysis of new or very recent marketing data and the introduction of new marketing models. We present a collection of models that are useful to analyze (1) the optimal launch time of new and dominant technologies, (2) the triggers, speed and timing of new

  19. Ethanol production method and system

    Science.gov (United States)

    Chen, M.J.; Rathke, J.W.

    1983-05-26

    Ethanol is selectively produced from the reaction of methanol with carbon monoxide and hydrogen in the presence of a transition metal carbonyl catalyst. Methanol serves as a solvent and may be accompanied by a less volatile co-solvent. The solution includes the transition metal carbonyl catalysts and a basic metal salt such as an alkali metal or alkaline earth metal formate, carbonate or bicarbonate. A gas containing a high carbon monoxide to hydrogen ratio, as is present in a typical gasifer product, is contacted with the solution for the preferential production of ethanol with minimal water as a byproduct. Fractionation of the reaction solution provides substantially pure ethanol product and allows return of the catalysts for reuse.

  20. Methanol production method and system

    Science.gov (United States)

    Chen, Michael J.; Rathke, Jerome W.

    1984-01-01

    Ethanol is selectively produced from the reaction of methanol with carbon monoxide and hydrogen in the presence of a transition metal carbonyl catalyst. Methanol serves as a solvent and may be accompanied by a less volatile co-solvent. The solution includes the transition metal carbonyl catalysts and a basic metal salt such as an alkali metal or alkaline earth metal formate, carbonate or bicarbonate. A gas containing a high carbon monoxide to hydrogen ratio, as is present in a typical gasifer product, is contacted with the solution for the preferential production of ethanol with minimal water as a byproduct. Fractionation of the reaction solution provides substantially pure ethanol product and allows return of the catalysts for reuse.

  1. Order and disorder in product innovation models

    NARCIS (Netherlands)

    Pina e Cunha, Miguel; Gomes, Jorge F.S.; Gomes, J.F.

    2003-01-01

    This article argues that the conceptual development of product innovation models goes hand in hand with paradigmatic changes in the field of organization science. Remarkable similarities in the change of organizational perspectives and product innovation models are noticeable. To illustrate how

  2. Product Configuration Systems and Consequences for Productivity and Quality

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard; Edwards, Kasper

    2004-01-01

    Product Configuration Systems (PCS) are systems to produce quotations to potential buyers of the products an enterprise produces. Typically the products are complex and will first be produced according to specific needs from the customers. From twelve case studies in Danish industry...... with informations about expected and realised costs and benefits in implemented PCS's we have the following results: the three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, and 3)using less resources.The results achieved are in accordance...

  3. Mars Integrated Propellant Production System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Integrated Mars In-Situ Propellant Production System (IMISPPS) is an end-to-end system that will produce rocket propellant on Mars from CO2 in the Martian...

  4. Mars Integrated Propellant Production System, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The Integrated Mars In-Situ Propellant Production System (IMISPPS) is an end-to-end system that will produce rocket propellant on Mars from CO2 in the Martian...

  5. High productivity vacuum blasting system

    International Nuclear Information System (INIS)

    Ebadian, M.A.

    2000-01-01

    The purpose of the project is to increase the productivity and economics of existing vacuum blasting technology. This technology is used to remove radioactive contamination, PCB's and lead-base paint and provides worker and environmental protection by continuously recycling the blast media and the full containment of the dust generated in the process

  6. System of Natural Health Products

    Directory of Open Access Journals (Sweden)

    Angelica Paoletti

    2011-01-01

    Full Text Available Introduction. The safety of vitamin K antagonists (VKA use can be compromised by many popular herbal supplements taken by individuals. The literature reports that 30% of warfarin-treated patients self-medicates with herbs. Possible interactions represent an health risk. We aimed to identify all herbs-oral anticoagulants interactions collected in the Italian database of suspected adverse reactions to “natural health” products. Methods. The Italian database of spontaneous reports of suspected adverse reactions to natural products was analyzed to address herb-VKAs interactions. Results. From 2002 to 2009, we identified 12 reports with 7 cases of INR reduction in patients treated with warfarin (n=3 and acenocoumarol (n=4, and 5 cases of INR increase (all warfarin associated. It was reported 8 different herbal products as possibly interacting. Discussion. Our study confirms the risk of interactions, highlighting the difficulty to characterize them and their mechanisms and, finally, prevent their onset. The reported data underline the urgent need of healthcare providers being aware of the possible interaction between natural products and VKA, also because of the critical clinical conditions affecting patients. This is the first step to have the best approach to understand possible INR alterations linked to herb-VKA interaction and to rightly educate patients in treatment with VKA.

  7. Alert Systems for production Plants

    DEFF Research Database (Denmark)

    Nielsen, Thomas Dyhre; Jensen, Finn Verner

    2005-01-01

    notably, there was a lack of both knowledge and data concerning possible faults, and it therefore turned out to be infeasible to learn/construct a standard classification model for doing fault detection. As an alternative we propose a method for doing on-line fault detection using only a model of normal...

  8. Dynamic modeling of the INAPRO aquaponic system

    NARCIS (Netherlands)

    Karimanzira, Divas; Keesman, Karel J.; Kloas, Werner; Baganz, Daniela; Rauschenbach, Thomas

    2016-01-01

    The use of modeling techniques to analyze aquaponics systems is demonstrated with an example of dynamic modeling for the production of Nile tilapia (Oreochromis niloticus) and tomatoes (Solanum lycopersicon) using the innovative double recirculating aquaponic system ASTAF-PRO. For the management

  9. PLM system support for modular product development

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf

    2015-01-01

    is the description of an empirical tested approach using a visual product architecture representation in combination with a PLM system to support the development of a product family of products. The results from the study encompass new PLM capabilities for handling multiple product structures, visualising multiple......A modular design strategy both enables, but also demands, parallelism in design activities and collaboration between a diversity of disciplines in companies, which often involves supporting computer-based tools for enhancing interaction, design management, and communication. Product data management...... (PDM) and product lifecycle management (PLM) systems offer support by automating and managing some of the operational complexity of modular design activities. PLM system tools are used for handling a variety of product definitions, to manage workflow of development activities, and to measure relational...

  10. Modeling pure culture heterotrophic production of polyhydroxybutyrate (PHB).

    Science.gov (United States)

    Mozumder, Md Salatul Islam; Goormachtigh, Laurens; Garcia-Gonzalez, Linsey; De Wever, Heleen; Volcke, Eveline I P

    2014-03-01

    In this contribution a mechanistic model describing the production of polyhydroxybutyrate (PHB) through pure-culture fermentation was developed, calibrated and validated for two different substrates, namely glucose and waste glycerol. In both cases, non-growth-associated PHB production was triggered by applying nitrogen limitation. The occurrence of some growth-associated PHB production besides non-growth-associated PHB production was demonstrated, although it is inhibited in the presence of nitrogen. Other phenomena observed experimentally and described by the model included biomass growth on PHB and non-linear product inhibition of PHB production. The accumulated impurities from the waste substrate negatively affected the obtained maximum PHB content. Overall, the developed mathematical model provided an accurate prediction of the dynamic behavior of heterotrophic biomass growth and PHB production in a two-phase pure culture system. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. Model based process-product design and analysis

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    This paper gives a perspective on modelling and the important role it has within product-process design and analysis. Different modelling issues related to development and application of systematic model-based solution approaches for product-process design is discussed and the need for a hybrid......, forms and complexity, together with their associated parameters. An example of a model-based system for design of chemicals based formulated products is also given....... model-based framework is highlighted. This framework should be able to manage knowledge-data, models, and associated methods and tools integrated with design work-flows and data-flows for specific product-process design problems. In particular, the framework needs to manage models of different types...

  12. Global manure nitrogen production and application in cropland during 1860-2014: a 5 arcmin gridded global dataset for Earth system modeling

    Science.gov (United States)

    Zhang, Bowen; Tian, Hanqin; Lu, Chaoqun; Dangal, Shree R. S.; Yang, Jia; Pan, Shufen

    2017-09-01

    Given the important role of nitrogen input from livestock systems in terrestrial nutrient cycles and the atmospheric chemical composition, it is vital to have a robust estimation of the magnitude and spatiotemporal variation in manure nitrogen production and its application to cropland across the globe. In this study, we used the dataset from the Global Livestock Impact Mapping System (GLIMS) in conjunction with country-specific annual livestock populations to reconstruct the manure nitrogen production during 1860-2014. The estimated manure nitrogen production increased from 21.4 Tg N yr-1 in 1860 to 131.0 Tg N yr-1 in 2014 with a significant annual increasing trend (0.7 Tg N yr-1, p management practices on cropland across the globe. Datasets are available at style="" class="text">https://doi.org/10.1594/PANGAEA.871980 (Zhang et al., 2017).

  13. Entanglement production in quantized chaotic systems

    Indian Academy of Sciences (India)

    we have also considered the effect of different coupling strengths on entanglement production. Most of the earlier studies have considered the effect of chaos on en- tanglement production for the case of initially pure state of the overall system. A basic assumption of these studies is that the initial state of the overall system is.

  14. Expected energy production evaluation for photovoltaic systems

    DEFF Research Database (Denmark)

    Ding, Yi; Østergaard, Jacob; Peng, Wang

    2011-01-01

    A photovoltaic (PV) system consists of many solar panels, which are connected in series, parallel or a combination of both. Energy production for the PV system with various configurations is different. In this paper, a methodology is developed to evaluate and analyze the expected energy production...

  15. HIGH PRODUCTIVITY VACUUM BLASTING SYSTEM

    International Nuclear Information System (INIS)

    McPhee, William S.

    2001-01-01

    The Department of Energy (DOE) needs improved technologies to decontaminate large areas of both concrete and steel surfaces. The technology should have high operational efficiency, minimize exposures to workers, and produce low levels of secondary waste. In order to meet the DOE's needs, an applied research and development project for the improvement of a current decontamination technology, Vacuum Blasting, is proposed. The objective of this project is to improve the productivity and lower the expense of the existing vacuum blasting technology which has been widely used in DOE sites for removing radioactive contamination, PCBs, and lead-based paint. The proposed work would increase the productivity rate and provide safe and cost-effective decontamination of the DOE sites

  16. Information Systems Efficiency Model

    Directory of Open Access Journals (Sweden)

    Milos Koch

    2017-07-01

    Full Text Available This contribution discusses the basic concept of creating a new model for the efficiency and effectiveness assessment of company information systems. The present trends in this field are taken into account, and the attributes are retained of measuring the optimal solutions for a company’s ICT (the implementation, functionality, service, innovations, safety, relationships, costs, etc.. The proposal of a new model of assessment comes from our experience with formerly implemented and employed methods, methods which we have modified in time and adapted to companies’ needs but also to the necessaries of our research that has been done through the ZEFIS portal. The most noteworthy of them is the HOS method that we have discussed in a number of forums. Its main feature is the fact that it respects the complexity of an information system in correlation with the balanced state of its individual parts.

  17. NDSI products system based on Hadoop platform

    Science.gov (United States)

    Zhou, Yan; Jiang, He; Yang, Xiaoxia; Geng, Erhui

    2015-12-01

    Snow is solid state of water resources on earth, and plays an important role in human life. Satellite remote sensing is significant in snow extraction with the advantages of cyclical, macro, comprehensiveness, objectivity, timeliness. With the continuous development of remote sensing technology, remote sensing data access to the trend of multiple platforms, multiple sensors and multiple perspectives. At the same time, in view of the remote sensing data of compute-intensive applications demand increase gradually. However, current the producing system of remote sensing products is in a serial mode, and this kind of production system is used for professional remote sensing researchers mostly, and production systems achieving automatic or semi-automatic production are relatively less. Facing massive remote sensing data, the traditional serial mode producing system with its low efficiency has been difficult to meet the requirements of mass data timely and efficient processing. In order to effectively improve the production efficiency of NDSI products, meet the demand of large-scale remote sensing data processed timely and efficiently, this paper build NDSI products production system based on Hadoop platform, and the system mainly includes the remote sensing image management module, NDSI production module, and system service module. Main research contents and results including: (1)The remote sensing image management module: includes image import and image metadata management two parts. Import mass basis IRS images and NDSI product images (the system performing the production task output) into HDFS file system; At the same time, read the corresponding orbit ranks number, maximum/minimum longitude and latitude, product date, HDFS storage path, Hadoop task ID (NDSI products), and other metadata information, and then create thumbnails, and unique ID number for each record distribution, import it into base/product image metadata database. (2)NDSI production module: includes

  18. Batch Cultivation Model for Biopolymer Production

    Directory of Open Access Journals (Sweden)

    C. E. Torres-Cerna

    2017-04-01

    Full Text Available This paper presents a mathematical model to evaluate the kinetics of two different Pseudomonas putida strains, wild and mutant-type for the microbial production of polyhydroxyalkanoates (PHAs. Model parameters were estimated to represent adequately experimental data from the batch reactor using the differential evolution algorithm. Based on the mathematical model with the best-fit parameter values, simulations suggested that the high production of PHA by the mutant strain can be attributed not only to the higher production of PHA but also to a reduction in the consumption rate of the substrates of approximately 66 %. Remarkably, the cell growth rate value is higher for the wild type than the mutant type, suggesting that the PHA increase is not only to an increase in the production rate but also to the metabolism of the cells. This mathematical model advances comprehension of the PHA production capacity by P. putida paving the road towards environmentally friendly plastics.

  19. Test-driven modeling of embedded systems

    DEFF Research Database (Denmark)

    Munck, Allan; Madsen, Jan

    2015-01-01

    To benefit maximally from model-based systems engineering (MBSE) trustworthy high quality models are required. From the software disciplines it is known that test-driven development (TDD) can significantly increase the quality of the products. Using a test-driven approach with MBSE may have...... a similar positive effect on the quality of the system models and the resulting products and may therefore be desirable. To define a test-driven model-based systems engineering (TD-MBSE) approach, we must define this approach for numerous sub disciplines such as modeling of requirements, use cases......, scenarios, behavior, architecture, etc. In this paper we present a method that utilizes the formalism of timed automatons with formal and statistical model checking techniques to apply TD-MBSE to the modeling of system architecture and behavior. The results obtained from applying it to an industrial case...

  20. Development of a Virtual Maintenance System for Complex Mechanical Product

    Directory of Open Access Journals (Sweden)

    Xin-hua Liu

    2013-01-01

    Full Text Available In order to improve the maintenance training effect of complex mechanical product, a virtual maintenance system was developed. The system framework was proposed, and the main functional modules were elaborated. A multilevel information representation model for complex mechanical product was put forward, and the flowchart of model transformation technology was designed. Moreover, a collision detection method based on hierarchical bounding volume was proposed, and the maintainability analysis and evaluation solution based on maintenance knowledge was presented. Finally, a prototype system was developed, and the proposed system was provedto be efficient through an example of hydraulic winch.

  1. Group decision support system for customer-driven product design

    Science.gov (United States)

    Lin, Zhihang; Chen, Hang; Chen, Kuen; Che, Ada

    2000-10-01

    This paper describes the work on the development of a group decision support system for customer driven product design. The customer driven is to develop products, which meet all customer requirements in whole life cycle of products. A process model of decision during product primary design is proposed to formulate the structured, semi-structured and unstructured decision problems. The framework for the decision support system is presented that integrated both advances in the group decision making and distributed artificial intelligent. The system consists of the product primary design tool kit and the collaborative platform with multi-agent structure. The collaborative platform of the system and the product primary design tool kit, including the VOC (Voice of Customer) tool, QFD (Quality Function Deployment) tool, the Conceptual design tool, Reliability analysis tool and the cost and profit forecasting tool, are indicated.

  2. Ultra-Deepwater Production Systems

    Energy Technology Data Exchange (ETDEWEB)

    K. L. Smith; M. E. Leveque

    2003-09-30

    This report includes technical progress made during the period October, 2002 through September, 2003. At the end of the second technical progress report, the ConocoPhillips opportunities to apply subsea processing in the Gulf of Mexico had been exhausted, and an alternative site was identified in Norway. This was a non-ConocoPhillips operated field, and the subsea processing was proposed as a phased development approach with 2-phase separation at the field, and then gas and liquids exported via pipeline to remote platform locations for processing. Although the unrisked economics were quite favorable, the risked economic evaluation compelled the operator to develop the field with the more conventional and proven Floating Production, Storage and Offloading (FPSO) option. Work on the subsea processing was suspended at this time. Discussions with DOE regarding two other step-change deepwater technologies ensued. One was an effort to develop a light-weight, high pressure composite production riser. A field demonstration of the design would then be performed by deploying a limited number of composite joints in a Gulf of Mexico deepwater development. The other was to begin the process of taking drilling with casing technology to the deepwater. This is called, ''close-tolerance liner drilling''. It was agreed that both technologies should be pursued, and the work began. During this reporting period, the initial production riser design had been completed and preliminary test sample components were being fabricated. Regarding the liner drilling, the sub-contractors were selected, the design basis was agreed and designs progressed towards meeting a projected first quarter, 2004 onshore test program.

  3. Environmental issues for intensive biomass production systems

    International Nuclear Information System (INIS)

    Tattersall Smith, C.

    1998-01-01

    The aim of IEA Bioenergy Task XII Activity 4.2 'Environmental Issues' was to evaluate environmental sustainability of intensive biomass systems and develop guidelines to ensure environmental soundness of such systems. Eight countries participated in the work: Austria, Canada, Denmark, Finland, New Zealand, Sweden, U.S.A. and U.K. During the period 1995-1997, collaborators have: evaluated environmental sustainability of intensive biomass production systems; assessed environmental sustainability of utilizing biosolids, e.g., wastewater sludge and wood ash, and effluents, to increase productivity of conventional and short rotation forestry systems; and evaluated and developed environmental guidelines for deployment of bioenergy production systems. The forestry and bioenergy industrial sectors were active participants in all Activity field study tours and workshops. This paper reviews achievements of Task XII Activity 4.2 and suggests where future international collaboration is required to achieve sustainable forestry bioenergy production systems 62 refs, 1 fig, 1 tab

  4. C-11 cyanide production system

    Science.gov (United States)

    Kim, Dohyun; Alexoff, David; Kim, Sung Won; Hooker, Jacob M.; Ferrieri, Richard A.

    2017-11-21

    A method for providing .sup.11C-labeled cyanides from .sup.11C labeled oxides in a target gas stream retrieved from an irradiated high pressure gaseous target containing O.sub.2, wherein .sup.11C labeled oxides are reduced with H.sub.2 in the presence of a nickel catalyst under a pressure and a temperature sufficient to form a product stream comprising at least about 95% .sup.11CH.sub.4, the .sup.11CH.sub.4 is then combined with an excess of NH.sub.3 in a carrier/reaction stream flowing at an accelerated velocity and the combined .sup.11CH4 carrier/reaction stream is then contacted with a platinum (Pt) catalyst particulate supported on a substantially-chemically-nonreactive heat-stable support at a temperature of at least about 900.degree. C., whereby a product stream comprising at least about 60% H.sup.11CN is provided in less than 10 minutes from retrieval of the .sup.11C labeled oxide.

  5. A physiological production model for cacao : results of model simulations

    NARCIS (Netherlands)

    Zuidema, P.A.; Leffelaar, P.A.

    2002-01-01

    CASE2 is a physiological model for cocoa (Theobroma cacao L.) growth and yield. This report introduces the CAcao Simulation Engine for water-limited production in a non-technical way and presents simulation results obtained with the model.

  6. Mars oxygen production system design

    Science.gov (United States)

    Cotton, Charles E.; Pillow, Linda K.; Perkinson, Robert C.; Brownlie, R. P.; Chwalowski, P.; Carmona, M. F.; Coopersmith, J. P.; Goff, J. C.; Harvey, L. L.; Kovacs, L. A.

    1989-01-01

    The design and construction phase is summarized of the Mars oxygen demonstration project. The basic hardware required to produce oxygen from simulated Mars atmosphere was assembled and tested. Some design problems still remain with the sample collection and storage system. In addition, design and development of computer compatible data acquisition and control instrumentation is ongoing.

  7. Improvement of Artistic Cast Production System

    Directory of Open Access Journals (Sweden)

    Władysiak R.

    2017-09-01

    Full Text Available The paper presents the technology and organization of the artistic cast production. On the basis of the actual cast production system, the manufacturing process was shown, in particular sand–piece moulding, which is a very important process and a time-consuming part of the entire manufacture of the casts. The current state of the production process as well as the organization of the work and production technology were analysed with the use of methods and techniques of production improvement, the Lean Manufacturing concept and computer systems. The results of the analysis and studies were shown with use of schemes and graphs of the layout of the production resources, a flow chart of the production process, value stream mapping, and a costs table for the production and modernization of the moulding stage. The work has shown that there are possibilities to improve the artistic cast production system. This improvement leads to increased productivity, lower production costs of artistic casts and increased competitiveness of the foundry.

  8. Bacterial systems for production of heterologous proteins.

    Science.gov (United States)

    Zerbs, Sarah; Frank, Ashley M; Collart, Frank R

    2009-01-01

    Proteins are the working molecules of all biological systems and participate in a majority of cellular chemical reactions and biological processes. Knowledge of the properties and function of these molecules is central to an understanding of chemical and biological processes. In this context, purified proteins are a starting point for biophysical and biochemical characterization methods that can assist in the elucidation of function. The challenge for production of proteins at the scale and quality required for experimental, therapeutic and commercial applications has led to the development of a diverse set of methods for heterologous protein production. Bacterial expression systems are commonly used for protein production as these systems provide an economical route for protein production and require minimal technical expertise to establish a laboratory protein production system.

  9. Toyota production system beyond large-scale production

    CERN Document Server

    Ohno, Taiichi

    1998-01-01

    In this classic text, Taiichi Ohno--inventor of the Toyota Production System and Lean manufacturing--shares the genius that sets him apart as one of the most disciplined and creative thinkers of our time. Combining his candid insights with a rigorous analysis of Toyota's attempts at Lean production, Ohno's book explains how Lean principles can improve any production endeavor. A historical and philosophical description of just-in-time and Lean manufacturing, this work is a must read for all students of human progress. On a more practical level, it continues to provide inspiration and instruction for those seeking to improve efficiency through the elimination of waste.

  10. Observed benefits from product configuration systems

    DEFF Research Database (Denmark)

    Hvam, Lars; Haug, Anders; Mortensen, Niels Henrik

    2013-01-01

    This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...... affected by the use of product configu-ration systems e.g. increased sales, decrease in the number of SKU's, improved ability to introduce new products, and cost reductions.......This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...... systems in industry companies and partly to assess if the objectives suggested are appropriate for describing the impact of product configuration systems and identifying other possible objectives. The empirical study of the com-panies also gives an indication of more overall performance indicators being...

  11. Production system rationalisation on the example of iron foundry

    Directory of Open Access Journals (Sweden)

    S. Kukla

    2010-04-01

    Full Text Available The present paper presents a systemic approach to foundry management. Thanks to production process modelling and simulation techniques, an attempt was made to synthesise many interconnected devices and numerous manufacturing stages into one production system. In the beginning, a factor analysis was carried out of the research object, which is a system of iron castings manufacture on automated foundry lines. On the basis of a simulation experiment, use the accessible production resources and manufacturing own cost of castings were analysed, depending on batch content and melting order, choice of an automatic line and the model of line fed with cast iron, sequence of order realization and the size of production lots. Simulation experiments were carried out on a computer simulation model prepared in the Arena packet produced by Rockwell Automation. Cost was estimated on the basis of additional calculation according to cost centres basing on factory spreadsheet.

  12. Animal production systems in the industrialised world.

    Science.gov (United States)

    Sørensen, J T; Edwards, S; Noordhuizen, J; Gunnarsson, S

    2006-08-01

    The production of food from animal origin is relatively stable in the industrialised world. However, animal production systems are changing dramatically with respect to location, herd size and specialisation. Increased pressure from a critical public is moving animal-based production towards systems such as organic production and loose-housing systems which allow the animals to better express normal behaviour. The focus on food safety promotes systems with a high degree of biosecurity, often associated with an increase in herd size and self-containment. The globalisation of agricultural trade and increased competition also favours an increase in herd size and specialisation. These trends also lead to regions with livestock-dense areas, giving rise to environmental concerns. Therefore, good farming practice regulations and systems to provide a higher level of transparency, such as quality risk management programmes, are being developed.

  13. Statistical Model Checking for Product Lines

    DEFF Research Database (Denmark)

    ter Beek, Maurice H.; Legay, Axel; Lluch Lafuente, Alberto

    2016-01-01

    We report on the suitability of statistical model checking for the analysis of quantitative properties of product line models by an extended treatment of earlier work by the authors. The type of analysis that can be performed includes the likelihood of specific product behaviour, the expected...... average cost of products (in terms of the attributes of the products’ features) and the probability of features to be (un)installed at runtime. The product lines must be modelled in QFLan, which extends the probabilistic feature-oriented language PFLan with novel quantitative constraints among features...... behaviour converge in a discrete-time Markov chain semantics, enabling the analysis of quantitative properties. Technically, a Maude implementation of QFLan, integrated with Microsoft’s SMT constraint solver Z3, is combined with the distributed statistical model checker MultiVeStA, developed by one...

  14. Multivariate optimization of production systems

    International Nuclear Information System (INIS)

    Carroll, J.A.; Horne, R.N.

    1992-01-01

    This paper reports that mathematically, optimization involves finding the extreme values of a function. Given a function of several variables, Z = ∫(rvec x 1 , rvec x 2 ,rvec x 3 ,→x n ), an optimization scheme will find the combination of these variables that produces an extreme value in the function, whether it is a minimum or a maximum value. Many examples of optimization exist. For instance, if a function gives and investor's expected return on the basis of different investments, numerical optimization of the function will determine the mix of investments that will yield the maximum expected return. This is the basis of modern portfolio theory. If a function gives the difference between a set of data and a model of the data, numerical optimization of the function will produce the best fit of the model to the data. This is the basis for nonlinear parameter estimation. Similar examples can be given for network analysis, queuing theory, decision analysis, etc

  15. A production inventory model with deteriorating items and shortages

    Directory of Open Access Journals (Sweden)

    Samanta G.P.

    2004-01-01

    Full Text Available A continuous production control inventory model for deteriorating items with shortages is developed. A number of structural properties of the inventory system are studied analytically. The formulae for the optimal average system cost, stock level, backlog level and production cycle time are derived when the deterioration rate is very small. Numerical examples are taken to illustrate the procedure of finding the optimal total inventory cost, stock level, backlog level and production cycle time. Sensitivity analysis is carried out to demonstrate the effects of changing parameter values on the optimal solution of the system.

  16. Measuring productivity differences in equilibrium search models

    DEFF Research Database (Denmark)

    Lanot, Gauthier; Neumann, George R.

    1996-01-01

    Equilibrium search models require unobserved heterogeneity in productivity to fit observed wage distribution data, but provide no guidance about the location parameter of the heterogeneity. In this paper we show that the location of the productivity heterogeneity implies a mode in a kernel density...

  17. Mathematical modeling of fructose production by immobilised ...

    African Journals Online (AJOL)

    Production of fructose from glucose isomerisation process using commercial immobilized glucose isomerase (IGI) was conducted in a batch type of stirred tank bioreactor. A mathematical model was developed to describe the effect of temperature and pH on the kinetic parameters of fructose production. Modified Santos ...

  18. A model for persistency of egg production

    NARCIS (Netherlands)

    Grossman, M.; Gossman, T.N.; Koops, W.J.

    2000-01-01

    The objectives of our study were to propose a new definition for persistency of egg production and to develop a mathematical model to describe the egg production curve, one that includes a new measure for persistency, based on the proposed definition, for use as a selection criterion to improve

  19. Alternative wind power modeling methods using chronological and load duration curve production cost models

    Energy Technology Data Exchange (ETDEWEB)

    Milligan, M R

    1996-04-01

    As an intermittent resource, capturing the temporal variation in windpower is an important issue in the context of utility production cost modeling. Many of the production cost models use a method that creates a cumulative probability distribution that is outside the time domain. The purpose of this report is to examine two production cost models that represent the two major model types: chronological and load duration cure models. This report is part of the ongoing research undertaken by the Wind Technology Division of the National Renewable Energy Laboratory in utility modeling and wind system integration.

  20. Systems Thinking, Lean Production and Action Learning

    Science.gov (United States)

    Seddon, John; Caulkin, Simon

    2007-01-01

    Systems thinking underpins "lean" management and is best understood through action-learning as the ideas are counter-intuitive. The Toyota Production System is just that--a system; the failure to appreciate that starting-place and the advocacy of "tools" leads many to fail to grasp what is, without doubt, a significant…

  1. Modeling Fission Product Sorption in Graphite Structures

    International Nuclear Information System (INIS)

    Szlufarska, Izabela; Morgan, Dane; Allen, Todd

    2013-01-01

    The goal of this project is to determine changes in adsorption and desorption of fission products to/from nuclear-grade graphite in response to a changing chemical environment. First, the project team will employ principle calculations and thermodynamic analysis to predict stability of fission products on graphite in the presence of structural defects commonly observed in very high-temperature reactor (VHTR) graphites. Desorption rates will be determined as a function of partial pressure of oxygen and iodine, relative humidity, and temperature. They will then carry out experimental characterization to determine the statistical distribution of structural features. This structural information will yield distributions of binding sites to be used as an input for a sorption model. Sorption isotherms calculated under this project will contribute to understanding of the physical bases of the source terms that are used in higher-level codes that model fission product transport and retention in graphite. The project will include the following tasks: Perform structural characterization of the VHTR graphite to determine crystallographic phases, defect structures and their distribution, volume fraction of coke, and amount of sp2 versus sp3 bonding. This information will be used as guidance for ab initio modeling and as input for sorptivity models; Perform ab initio calculations of binding energies to determine stability of fission products on the different sorption sites present in nuclear graphite microstructures. The project will use density functional theory (DFT) methods to calculate binding energies in vacuum and in oxidizing environments. The team will also calculate stability of iodine complexes with fission products on graphite sorption sites; Model graphite sorption isotherms to quantify concentration of fission products in graphite. The binding energies will be combined with a Langmuir isotherm statistical model to predict the sorbed concentration of fission products

  2. Modeling Fission Product Sorption in Graphite Structures

    Energy Technology Data Exchange (ETDEWEB)

    Szlufarska, Izabela [University of Wisconsin, Madison, WI (United States); Morgan, Dane [University of Wisconsin, Madison, WI (United States); Allen, Todd [University of Wisconsin, Madison, WI (United States)

    2013-04-08

    The goal of this project is to determine changes in adsorption and desorption of fission products to/from nuclear-grade graphite in response to a changing chemical environment. First, the project team will employ principle calculations and thermodynamic analysis to predict stability of fission products on graphite in the presence of structural defects commonly observed in very high- temperature reactor (VHTR) graphites. Desorption rates will be determined as a function of partial pressure of oxygen and iodine, relative humidity, and temperature. They will then carry out experimental characterization to determine the statistical distribution of structural features. This structural information will yield distributions of binding sites to be used as an input for a sorption model. Sorption isotherms calculated under this project will contribute to understanding of the physical bases of the source terms that are used in higher-level codes that model fission product transport and retention in graphite. The project will include the following tasks: Perform structural characterization of the VHTR graphite to determine crystallographic phases, defect structures and their distribution, volume fraction of coke, and amount of sp2 versus sp3 bonding. This information will be used as guidance for ab initio modeling and as input for sorptivity models; Perform ab initio calculations of binding energies to determine stability of fission products on the different sorption sites present in nuclear graphite microstructures. The project will use density functional theory (DFT) methods to calculate binding energies in vacuum and in oxidizing environments. The team will also calculate stability of iodine complexes with fission products on graphite sorption sites; Model graphite sorption isotherms to quantify concentration of fission products in graphite. The binding energies will be combined with a Langmuir isotherm statistical model to predict the sorbed concentration of fission

  3. Model Predictive Control Based on System Re-Identification (MPC-SRI) to Control Bio-H2 Production from Biomass

    Science.gov (United States)

    Wahid, A.; Taqwallah, H. M. H.

    2018-03-01

    Compressors and a steam reformer are the important units in biohydrogen from biomass plant. The compressors are useful for achieving high-pressure operating conditions while the steam reformer is the main process to produce H2 gas. To control them, in this research used a model predictive control (MPC) expected to have better controller performance than conventional controllers. Because of the explicit model empowerment in MPC, obtaining a better model is the main objective before employing MPC. The common way to get the empirical model is through the identification system, so that obtained a first-order plus dead-time (FOPDT) model. This study has already improved that way since used the system re-identification (SRI) based on closed loop mode. Based on this method the results of the compressor pressure control and temperature control of steam reformer were that MPC based on system re-identification (MPC-SRI) has better performance than MPC without system re-identification (MPCWSRI) and the proportional-integral (PI) controller, by % improvement of 73% against MPCWSRI and 75% against the PI controller.

  4. Joint Optimization Approach of Maintenance and Production Planning for a Multiple-Product Manufacturing System

    Directory of Open Access Journals (Sweden)

    Lahcen Mifdal

    2015-01-01

    Full Text Available This paper deals with the problem of maintenance and production planning for randomly failing multiple-product manufacturing system. The latter consists of one machine which produces several types of products in order to satisfy random demands corresponding to every type of product. At any given time, the machine can only produce one type of product and then switches to another one. The purpose of this study is to establish sequentially an economical production plan and an optimal maintenance strategy, taking into account the influence of the production rate on the system’s degradation. Analytical models are developed in order to find the production plan and the preventive maintenance strategy which minimizes sequentially the total production/inventory cost and then the total maintenance cost. Finally, a numerical example is presented to illustrate the usefulness of the proposed approach.

  5. Equations of state for explosive detonation products: The PANDA model

    Energy Technology Data Exchange (ETDEWEB)

    Kerley, G.I.

    1994-05-01

    This paper discusses a thermochemical model for calculating equations of state (EOS) for the detonation products of explosives. This model, which was first presented at the Eighth Detonation Symposium, is available in the PANDA code and is referred to here as ``the Panda model``. The basic features of the PANDA model are as follows. (1) Statistical-mechanical theories are used to construct EOS tables for each of the chemical species that are to be allowed in the detonation products. (2) The ideal mixing model is used to compute the thermodynamic functions for a mixture of these species, and the composition of the system is determined from assumption of chemical equilibrium. (3) For hydrocode calculations, the detonation product EOS are used in tabular form, together with a reactive burn model that allows description of shock-induced initiation and growth or failure as well as ideal detonation wave propagation. This model has been implemented in the three-dimensional Eulerian code, CTH.

  6. Novel Hydrogen Production Systems Operative at Thermodynamic Extremes

    Energy Technology Data Exchange (ETDEWEB)

    Gunsalus, Robert

    2012-11-30

    We have employed a suite of molecular, bioinformatics, and biochemical tools to interrogate the thermodynamically limiting steps of H{sub 2} production from fatty acids in syntrophic communities. We also developed a new microbial model system that generates high H{sub 2} concentrations (over 17% of the gas phase) with high H{sub 2} yields of over 3 moles H{sub 2} per mole glucose. Lastly, a systems-based study of biohydrogen production in model anaerobic consortia was performed to begin identifying key regulated steps as a precursor to modeling co-metabolism. The results of these studies significantly expand our ability to predict and model systems for H{sub 2} production in novel anaerobes that are currently very poorly documented or understood.

  7. High Production Volume Information System (HPVIS)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The High Production Volume Information System (HPVIS) provides access to select health and environmental effect information on chemicals that are manufactured in...

  8. GATING SYSTEMS FOR PRODUCTION OF HYDRODISTRIBUTORS

    Directory of Open Access Journals (Sweden)

    D. A. Volkov

    2010-01-01

    Full Text Available Gating systems of the first group of special ways of casting into shell molds, casting in lined chill mold as more effective for production of hydrodistributors were developed and studied.

  9. Pig Production System, Marketing Chain and Cysticercosis ...

    African Journals Online (AJOL)

    Publications on pig production and cysticercosis in The Gambia and Senegal are very scant. Hence, this survey was implemented to characterise the pig production systems and marketing chain, and to assess people's awareness of cysticercosis. The survey sites were Western region and Kanifing Municipality of The ...

  10. Conceptual frames for changing production system design

    DEFF Research Database (Denmark)

    Jensen, Per Langå; Broberg, Ole

    2003-01-01

    In order to integrate ergonomic aspects into the design of products and production systems many tools and procedures are available. For the ergonomists, however, it is a question of recognizing the organizational context and the role to play for making integration possible. Based on an understand...

  11. A systems perspective on nursing productivity.

    Science.gov (United States)

    North, Nicola; Hughes, Frances

    2012-01-01

    Recent New Zealand reports have identified the nursing workforce for its potential to make a significant contribution to increased productivity in health services. The purpose of this paper is to review critically the recent and current labour approaches to improve nursing productivity in New Zealand, in a context of international research and experience. An examination of government documents regarding productivity, and a review of New Zealand and international literature and research on nursing productivity and its measurement form the basis of the paper. It is found that productivity improvement strategies are influenced by theories of labour economics and scientific management that conceptualise a nurse as a labour unit and a cost to the organisation. Nursing productivity rose significantly with the health reforms of the 1990s that reduced nursing input costs but impacts on patient safety and nurses were negative. Current approaches to increasing nursing productivity, including the "productive ward" and reconfiguration of nursing teams, also draw on manufacturing innovations. Emerging thinking considers productivity in the context of the work environment and changing professional roles, and proposes reconceptualising the nurse as an intellectual asset to knowledge-intensive health organisations. Strategies that take a systems approach to nursing productivity, that view nursing as a capital asset, that focus on the interface between nurse and working environment and measure patient and nurse outcomes are advocated. The paper shows that reframing nursing productivity brings into focus management strategies to raise productivity while protecting nursing and patient outcomes.

  12. Anaerobic digestion for methane generation and ammonia reforming for hydrogen production: A thermodynamic energy balance of a model system to demonstrate net energy feasibility

    International Nuclear Information System (INIS)

    Babson, David M.; Bellman, Karen; Prakash, Shaurya; Fennell, Donna E.

    2013-01-01

    During anaerobic digestion, organic matter is converted to carbon dioxide and methane, and organic nitrogen is converted to ammonia. Generally, ammonia is recycled as a fertilizer or removed via nitrification–denitrification in treatment systems; alternatively it could be recovered and catalytically converted to hydrogen, thus supplying additional fuel. To provide a basis for further investigation, a theoretical energy balance for a model system that incorporates anaerobic digestion, ammonia separation and recovery, and conversion of the ammonia to hydrogen is reported. The model Anaerobic Digestion-Bioammonia to Hydrogen (ADBH) system energy demands including heating, pumping, mixing, and ammonia reforming were subtracted from the total energy output from methane and hydrogen to create an overall energy balance. The energy balance was examined for the ADBH system operating with a fixed feedstock loading rate with C:N ratios (gC/gN) ranging from 136 to 3 which imposed corresponding total ammonia nitrogen (TAN) concentrations of 20–10,000 mg/L. Normalizing total energy potential to the methane potential alone indicated that at a C:N ratio of 17, the energy output was greater for the ADBH system than from anaerobic digestion generating only methane. Decreasing the C:N ratio increased the methane content of the biogas comprising primarily methane to >80% and increased the ammonia stripping energy demand. The system required 23–34% of the total energy generated as parasitic losses with no energy integration, but when internally produced heat and pressure differentials were recovered, parasitic losses were reduced to between 8 and 17%. -- Highlights: •Modeled an integrated Anaerobic Digestion-Bioammonia to Hydrogen (ADBH) system. •Demonstrated positive net energy produced over a range of conditions by ADBH. •Demonstrated significant advantages of dual fuel recovery for energy gain by >20%. •Suggested system design considerations for energy recovery with

  13. Thermodynamic modeling of complex systems

    DEFF Research Database (Denmark)

    Liang, Xiaodong

    . Contrary to earlier theories, the oil is not only present on the surface, but also in great volumes both in the water column and on the seafloor, which indicates that we do not know enough about how oil behaves in water and interacts with it. Sonar detection is one of the most important and necessary...... after an oil spill. Engineering thermodynamics could be applied in the state-of-the-art sonar products through advanced artificial technology, if the speed of sound, solubility and density of oil-seawater systems could be satisfactorily modelled. The addition of methanol or glycols into unprocessed well...... streams during subsea pipelines is necessary to inhibit gas hydrate formation, and the offshore reservoirs often mean complicated temperature and pressure conditions. Accurate description of the phase behavior and thermalphysical properties of complex systems containing petroleum fluids and polar...

  14. Modelling Fungal Fermentations for Enzyme Production

    DEFF Research Database (Denmark)

    Albæk, Mads Orla; Gernaey, Krist; Hansen, Morten S.

    We have developed a process model of fungal fed-batch fermentations for enzyme production. In these processes, oxygen transfer rate is limiting and controls the substrate feeding rate. The model has been shown to describe cultivations of both Aspergillus oryzae and Trichoderma reesei strains in 550...

  15. A deterministic aggregate production planning model considering quality of products

    International Nuclear Information System (INIS)

    Madadi, Najmeh; Wong, Kuan Yew

    2013-01-01

    Aggregate Production Planning (APP) is a medium-term planning which is concerned with the lowest-cost method of production planning to meet customers' requirements and to satisfy fluctuating demand over a planning time horizon. APP problem has been studied widely since it was introduced and formulated in 1950s. However, in several conducted studies in the APP area, most of the researchers have concentrated on some common objectives such as minimization of cost, fluctuation in the number of workers, and inventory level. Specifically, maintaining quality at the desirable level as an objective while minimizing cost has not been considered in previous studies. In this study, an attempt has been made to develop a multi-objective mixed integer linear programming model that serves those companies aiming to incur the minimum level of operational cost while maintaining quality at an acceptable level. In order to obtain the solution to the multi-objective model, the Fuzzy Goal Programming approach and max-min operator of Bellman-Zadeh were applied to the model. At the final step, IBM ILOG CPLEX Optimization Studio software was used to obtain the experimental results based on the data collected from an automotive parts manufacturing company. The results show that incorporating quality in the model imposes some costs, however a trade-off should be done between the cost resulting from producing products with higher quality and the cost that the firm may incur due to customer dissatisfaction and sale losses.

  16. Life cycle assessment and the resilience of product systems

    DEFF Research Database (Denmark)

    Pizzol, Massimo

    2015-01-01

    assessment (LCA), which main objective is determining the eco-efficiency of a product system with limited focus on its structure. The question is whether a product system which structure is improved or designed to be more resilient will result in being not only inefficient, but also eco-inefficient, when...... assessed by means of LCA. This study proposes a theoretical modelling approach to compare vulnerable and resilient product systems within the framework of LCA, consisting of assessment of disturbance and system expansion. Examples are provided where the theory is made operational. The structure......Resilience is the capacity of systems to withstand and recover from disturbance, depends on the structure and architecture of a system, and plays a key role for the sustainability of complex systems. Despite its importance, resilience is not explicitly taken into account by studies of life cycle...

  17. Aspect-Oriented Model-Driven Software Product Line Engineering

    Science.gov (United States)

    Groher, Iris; Voelter, Markus

    Software product line engineering aims to reduce development time, effort, cost, and complexity by taking advantage of the commonality within a portfolio of similar products. The effectiveness of a software product line approach directly depends on how well feature variability within the portfolio is implemented and managed throughout the development lifecycle, from early analysis through maintenance and evolution. This article presents an approach that facilitates variability implementation, management, and tracing by integrating model-driven and aspect-oriented software development. Features are separated in models and composed of aspect-oriented composition techniques on model level. Model transformations support the transition from problem to solution space models. Aspect-oriented techniques enable the explicit expression and modularization of variability on model, template, and code level. The presented concepts are illustrated with a case study of a home automation system.

  18. Sum rule limitations of kinetic particle-production models

    International Nuclear Information System (INIS)

    Knoll, J.; CEA Centre d'Etudes Nucleaires de Grenoble, 38; Guet, C.

    1988-04-01

    Photoproduction and absorption sum rules generalized to systems at finite temperature provide a stringent check on the validity of kinetic models for the production of hard photons in intermediate energy nuclear collisions. We inspect such models for the case of nuclear matter at finite temperature employed in a kinetic regime which copes those encountered in energetic nuclear collisions, and find photon production rates which significantly exceed the limits imposed by the sum rule even under favourable concession. This suggests that coherence effects are quite important and the production of photons cannot be considered as an incoherent addition of individual NNγ production processes. The deficiencies of present kinetic models may also apply for the production of probes such as the pion which do not couple perturbatively to the nuclear currents. (orig.)

  19. A MICROCOMPUTER MODEL FOR IRRIGATION SYSTEM EVALUATION

    OpenAIRE

    Williams, Jeffery R.; Buller, Orlan H.; Dvorak, Gary J.; Manges, Harry L.

    1988-01-01

    ICEASE (Irrigation Cost Estimator and System Evaluator) is a microcomputer model designed and developed to meet the need for conducting economic evaluation of adjustments to irrigation systems and management techniques to improve the use of irrigated water. ICEASE can calculate the annual operating costs for irrigation systems and has five options that can be used to economically evaluate improvements in the pumping plant or the way the irrigation system is used for crop production.

  20. Production Flexibility in Extensive Beef Farming Systems

    Directory of Open Access Journals (Sweden)

    Laura Astigarraga

    2011-03-01

    Full Text Available The aim of this work is to assess the flexibility of production allowed by extensive production conditions faced with variations in the environment, i.e., market variations and climatic fluctuations, of Limousin beef systems. The study used a case-based methodology in which seven beef farms with less than 1 LU/ha were chosen. Data collection was based on three interviews using a semistructured questionnaire and on the analysis of productive and economic results over a 15-year period (1991-2005. The main evolution of these farms is related to a rise in work productivity associated with an increase in herd size. Herd increase was made possible by enlarging the area, the margin of intensification being limited in these regions. To take advantage of the enlarged land area, females were reared for fattening or for reproduction instead of selling them at weaning. The Limousin female provides a wide product mix because of its plasticity, as has been studied by several researchers. This mix flexibility is achieved by delaying product differentiation, a form of production flexibility that can reduce the risk of under-producing or over-producing varied product configurations. On the other hand, calves sold to the Italian market after weaning are generic products, associated with a flexible production process to overcome fluctuations in forage availability due to climatic variations. The introduction of maize silage for feeding acts as an alternative route, actual and potential, through the system to overcome unexpected forage shortage from natural grasslands as a result of droughts. The study shows that extensive farming systems have developed types of flexibility to match different factors of uncertainty from the environment. Finally, the issue of farm system performance is thus not so much a question of whether a farm is fit at a specific moment in time, but whether it transforms into a less or more sustainable orientation.

  1. Integrable systems on semidirect product Lie groups

    Science.gov (United States)

    Capriotti, S.; Montani, H.

    2014-05-01

    We study integrable systems on the semidirect product of a Lie group and its Lie algebra as the representation space of the adjoint action. Regarding the tangent bundle of a Lie group as phase space endowed with this semidirect product Lie group structure, we construct a class of symplectic submanifolds equipped with a Dirac bracket on which integrable systems (in the Adler-Kostant-Symes sense) are naturally built through collective dynamics. In doing so, we address other issues such as factorization, Poisson-Lie structures and dressing actions. We show that the procedure becomes recursive for some particular Hamilton functions, giving rise to a tower of nested integrable systems.

  2. PRODUCTION OPTIMIZATION USING AGENT-BASED SYSTEM

    Directory of Open Access Journals (Sweden)

    Aleksandar Vujovic

    2016-03-01

    Full Text Available Production systems suffer frequent changes due to the growing demand and need for providing market competitiveness. Therefore, the application of intelligent systems can greatly increase the level of flexibility and efficiency, but also reduce the overall costs. On example of system for the production of irregular and variable shaped parts by cutting the wooden flat surfaces, it is discussed the possibility of applying intelligent agent-based system. In order to implement it in the production process, it was necessary to firstly performed an analysis and assessment of the initial situation. Then, we spotted a weak points and gave some suggestions to improve process by application of agents. The obtained solution has reduced the number of engaged workers, reduced the scope of their duties, made faster flow of materials, improved its utilization and we finally introduced the scheme of the new agent-based manufacturing process that achieves the foregoing benefits.

  3. Review of existing landfill leachate production models

    International Nuclear Information System (INIS)

    Khan, T.A.

    2000-01-01

    The protection of water resources is a fundamental consideration in managing landfill operations. Landfill sites should be designed and operated so as to control leachate production and hence minimize the risk of surface and ground water pollution. A further important development is the use of computer models to estimate the production of leachate from landfill sites. It is revealed from the literature that a number of landfill leachate management model lave been development in recent years. These models allow different engineering schemes to be evaluated and are essential tools for design and operation managements of modern landfills. This paper describes a review of such models mainly focused on their theory, practicability, data requirements, suitability to real situation and usefulness. An evaluation of these models identifies. (author)

  4. Systems of attitudes towards production in the pork industry

    DEFF Research Database (Denmark)

    Sørensen, Bjarne Taulo; Dutra de Barcellos, Marcia; Veflen Olsen, Nina

    2012-01-01

    search algorithms and structural equation models. The results suggest that evaluative judgments of the importance of pork production system attributes are generated in a schematic manner, driven by personal value orientations. The effect of personal value orientations was strong and largely unmediated......, understanding them as embedded into a wider attitude system that consists of attitudes towards objects of different abstraction levels, ranging from personal value orientations over general socio-political attitudes to evaluations of specific characteristics of agricultural production systems. It is assumed...... production systems was modelled. The analysis was based on data from a cross-national survey involving 1931 participants from Belgium, Denmark, Germany and Poland. The survey questionnaire contained measures of personal value orientations and attitudes towards environment and nature, industrial food...

  5. Banana production systems: identification of alternative systems for more sustainable production.

    Science.gov (United States)

    Bellamy, Angelina Sanderson

    2013-04-01

    Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension workers/researchers were interviewed; and a review of field experiments conducted by the National Banana Corporation between 1997 and 2002 was made. Correspondence analysis showed that there is no structured variation in large-scale banana producers' practices, but two other banana production systems were identified: a small-scale organic system and a small-scale conventional coffee-banana intercropped system. Field-scale research may reveal ways that these practices can be scaled up to achieve a productive and profitable system producing high-quality export bananas with fewer or no pesticides.

  6. Brief History of Agricultural Systems Modeling

    Science.gov (United States)

    Jones, James W.; Antle, John M.; Basso, Bruno O.; Boote, Kenneth J.; Conant, Richard T.; Foster, Ian; Godfray, H. Charles J.; Herrrero, Mario; Howitt, Richard E.; Janssen, Sandor; hide

    2016-01-01

    Agricultural systems science generates knowledge that allows researchers to consider complex problems or take informed agricultural decisions. The rich history of this science exemplifies the diversity of systems and scales over which they operate and have been studied. Modeling, an essential tool in agricultural systems science, has been accomplished by scientists from a wide range of disciplines, who have contributed concepts and tools over more than six decades. As agricultural scientists now consider the next generation models, data, and knowledge products needed to meet the increasingly complex systems problems faced by society, it is important to take stock of this history and its lessons to ensure that we avoid re-invention and strive to consider all dimensions of associated challenges. To this end, we summarize here the history of agricultural systems modeling and identify lessons learned that can help guide the design and development of next generation of agricultural system tools and methods. A number of past events combined with overall technological progress in other fields have strongly contributed to the evolution of agricultural system modeling, including development of process-based bio-physical models of crops and livestock, statistical models based on historical observations, and economic optimization and simulation models at household and regional to global scales. Characteristics of agricultural systems models have varied widely depending on the systems involved, their scales, and the wide range of purposes that motivated their development and use by researchers in different disciplines. Recent trends in broader collaboration across institutions, across disciplines, and between the public and private sectors suggest that the stage is set for the major advances in agricultural systems science that are needed for the next generation of models, databases, knowledge products and decision support systems. The lessons from history should be considered

  7. Carbon footprint and ammonia emissions of California beef production systems.

    Science.gov (United States)

    Stackhouse-Lawson, K R; Rotz, C A; Oltjen, J W; Mitloehner, F M

    2012-12-01

    Beef production is a recognized source of greenhouse gas (GHG) and ammonia (NH(3)) emissions; however, little information exists on the net emissions from beef production systems. A partial life cycle assessment (LCA) was conducted using the Integrated Farm System Model (IFSM) to estimate GHG and NH(3) emissions from representative beef production systems in California. The IFSM is a process-level farm model that simulates crop growth, feed production and use, animal growth, and the return of manure nutrients back to the land to predict the environmental impacts and economics of production systems. Ammonia emissions are determined by summing the emissions from animal housing facilities, manure storage, field applied manure, and direct deposits of manure on pasture and rangeland. All important sources and sinks of methane, nitrous oxide, and carbon dioxide are predicted from primary and secondary emission sources. Primary sources include enteric fermentation, manure, cropland used in feed production, and fuel combustion. Secondary emissions occur during the production of resources used on the farm, which include fuel, electricity, machinery, fertilizer, and purchased animals. The carbon footprint is the net exchange of all GHG in carbon dioxide equivalent (CO(2)e) units per kg of HCW produced. Simulated beef production systems included cow-calf, stocker, and feedlot phases for the traditional British beef breeds and calf ranch and feedlot phases for Holstein steers. An evaluation of differing production management strategies resulted in ammonia emissions ranging from 98 ± 13 to 141 ± 27 g/kg HCW and carbon footprints of 10.7 ± 1.4 to 22.6 ± 2.0 kg CO(2)e/kg HCW. Within the British beef production cycle, the cow-calf phase was responsible for 69 to 72% of total GHG emissions with 17 to 27% from feedlot sources. Holstein steers that entered the beef production system as a by-product of dairy production had the lowest carbon footprint because the emissions

  8. Power plant productivity and reliability information system

    Energy Technology Data Exchange (ETDEWEB)

    Pazos, R.; Lizarraga, E.

    1988-04-01

    This article describes an information system for handling equipment failure information of fossil fuel plants. This system produces 33 different reports, which contain failure statistics, plant availability, unavailability classified by cause, plant reliability indices, and maintenance productivity indices. Some of the innovations introduced by this system are: (1) event partition into any number of subevents for accurate description of event evolution, (2) separation of equipment and event cause for easy reporting, and (3) failure-mode information for better event description.

  9. Module-based quality system functionality evaluation in production logistics

    Energy Technology Data Exchange (ETDEWEB)

    Khabbazi, M.R.; Wikander, J.; Onori, M.; Maffei, A.; Chen, D.

    2016-07-01

    This paper addresses a comprehensive modeling and functionality evaluation of a module-based quality system in production logistics at the highest domain abstract level of business processes. All domain quality business processes and quality data transactions are modeled using BPMN and UML tools and standards at the business process and data modeling. A modular web-based prototype is developed to evaluate the models addressing the quality information system functionality requirements and modularity in production logistics through data scenarios and data queries. Using the object-oriented technique in design at the highest domain level, the proposed models are subject further development in the lower levels for the implementing case. The models are specifically able to manipulate all quality operations including remedy and control in a lot-based make-to-order production logistics system as an individual module. Due to the specification of system as domain design structure, all proposed BPMs, data models, and the actual database prototype are seen referential if not a solution as a practical “to-be” quality business process re-engineering template. This paper sets out to provide an explanatory approach using different practical technique at modeling steps as well as the prototype implementation. (Author)

  10. PLACE OF PRODUCTION COSTS SYSTEM ANALYSIS IN SYSTEM ANALYSIS

    Directory of Open Access Journals (Sweden)

    Mariia CHEREDNYCHENKO

    2016-12-01

    Full Text Available Current economic conditions require the development and implementation of an adequate system of production costs, which would ensure a steady profit growth and production volumes in a highly competitive, constantly increasing input prices and tariffs. This management system must be based on an integrated production costs system analysis (PCSA, which would provide all operating costs management subsystems necessary information to design and make better management decisions. It provides a systematic analysis of more opportunities in knowledge, creating conditions of integrity mechanism knowledge object consisting of elements that show intersystem connections, each of which has its own defined and limited objectives, relationship with the environment.

  11. A neurocomputational model of automatic sequence production.

    Science.gov (United States)

    Helie, Sebastien; Roeder, Jessica L; Vucovich, Lauren; Rünger, Dennis; Ashby, F Gregory

    2015-07-01

    Most behaviors unfold in time and include a sequence of submovements or cognitive activities. In addition, most behaviors are automatic and repeated daily throughout life. Yet, relatively little is known about the neurobiology of automatic sequence production. Past research suggests a gradual transfer from the associative striatum to the sensorimotor striatum, but a number of more recent studies challenge this role of the BG in automatic sequence production. In this article, we propose a new neurocomputational model of automatic sequence production in which the main role of the BG is to train cortical-cortical connections within the premotor areas that are responsible for automatic sequence production. The new model is used to simulate four different data sets from human and nonhuman animals, including (1) behavioral data (e.g., RTs), (2) electrophysiology data (e.g., single-neuron recordings), (3) macrostructure data (e.g., TMS), and (4) neurological circuit data (e.g., inactivation studies). We conclude with a comparison of the new model with existing models of automatic sequence production and discuss a possible new role for the BG in automaticity and its implication for Parkinson's disease.

  12. Modelling preparation and consumption of pork products

    DEFF Research Database (Denmark)

    Swart, Arno; Nauta, Maarten; Evers, Eric

    This poster describes the retail and consumer phase of the EFSA Salmonella in Pork QMRA (Quantitative Microbiological Risk Assessment, funded under an Article 36 grant to support the scientific opinion required by EFS). The food chain is modelled from retail to ingestion by the consumer. Three...... on daily life food handling practices are hard to obtain. We performed a literature survey and parametrised the model including the inherent variability in consumer behaviour. The output is the number of Salmonellae ingested per person per day, for each pig meat product. This output will in feed...... into the final model, where the risk of illness is modelled using a dose-response relation....

  13. System Advisor Model: Flat Plate Photovoltaic Performance Modeling Validation Report

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, Janine [National Renewable Energy Lab. (NREL), Golden, CO (United States); Whitmore, Jonathan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kaffine, Leah [National Renewable Energy Lab. (NREL), Golden, CO (United States); Blair, Nate [National Renewable Energy Lab. (NREL), Golden, CO (United States); Dobos, Aron P. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-12-01

    The System Advisor Model (SAM) is a free software tool that performs detailed analysis of both system performance and system financing for a variety of renewable energy technologies. This report provides detailed validation of the SAM flat plate photovoltaic performance model by comparing SAM-modeled PV system generation data to actual measured production data for nine PV systems ranging from 75 kW to greater than 25 MW in size. The results show strong agreement between SAM predictions and field data, with annualized prediction error below 3% for all fixed tilt cases and below 8% for all one axis tracked cases. The analysis concludes that snow cover and system outages are the primary sources of disagreement, and other deviations resulting from seasonal biases in the irradiation models and one axis tracking issues are discussed in detail.

  14. Consumer attitudes to different pig production systems

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Grunert, Klaus G; Zhou, Yanfeng

    2013-01-01

    In many Western countries, consumers have shown an increasing interest to the way in which food products are being produced. This study investigates Chinese consumers' attitudes towards different pig production systems by means of a conjoint analysis. While there has been a range of studies...... on Western consumers' attitudes to various forms of food production, little is known about the level of Chinese consumers' attitudes. A cross-sectional survey was carried out with 472 participants in six Chinese cities. Results indicate that Chinese consumers prefer industrial pig production systems, where...... traditional pig breeds are raised, over large-scale and small family farms. Farms with maximum attention to food safety which furthermore can provide lean meat with consistent quality are also preferred. Imported pig breeds and tasty, but variable meat were rejected. A 3-cluster solution found that consumers...

  15. Integrated Ceramic Membrane System for Hydrogen Production

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, Joseph; Lim, Hankwon; Drnevich, Raymond

    2010-08-05

    Phase I was a technoeconomic feasibility study that defined the process scheme for the integrated ceramic membrane system for hydrogen production and determined the plan for Phase II. The hydrogen production system is comprised of an oxygen transport membrane (OTM) and a hydrogen transport membrane (HTM). Two process options were evaluated: 1) Integrated OTM-HTM reactor – in this configuration, the HTM was a ceramic proton conductor operating at temperatures up to 900°C, and 2) Sequential OTM and HTM reactors – in this configuration, the HTM was assumed to be a Pd alloy operating at less than 600°C. The analysis suggested that there are no technical issues related to either system that cannot be managed. The process with the sequential reactors was found to be more efficient, less expensive, and more likely to be commercialized in a shorter time than the single reactor. Therefore, Phase II focused on the sequential reactor system, specifically, the second stage, or the HTM portion. Work on the OTM portion was conducted in a separate program. Phase IIA began in February 2003. Candidate substrate materials and alloys were identified and porous ceramic tubes were produced and coated with Pd. Much effort was made to develop porous substrates with reasonable pore sizes suitable for Pd alloy coating. The second generation of tubes showed some improvement in pore size control, but this was not enough to get a viable membrane. Further improvements were made to the porous ceramic tube manufacturing process. When a support tube was successfully coated, the membrane was tested to determine the hydrogen flux. The results from all these tests were used to update the technoeconomic analysis from Phase I to confirm that the sequential membrane reactor system can potentially be a low-cost hydrogen supply option when using an existing membrane on a larger scale. Phase IIB began in October 2004 and focused on demonstrating an integrated HTM/water gas shift (WGS) reactor to

  16. Managing complexity of product mix and production flow in configure-to-order production systems

    DEFF Research Database (Denmark)

    Myrodia, Anna; Bonev, Martin; Hvam, Lars

    2014-01-01

    In designing configure-to-order production systems for a growing product variety, companies are challenged with an increased complexity for obtaining high productivity levels and cost-effectiveness. In academia several optimization methods and conceptual frameworks for substituting components...... sizing and capacity utilization, while maintaining the production capacity as well as the external product variety......., or increasing lot sizes and storage capacity have been proposed. Our study presents a practical framework for quantifying the impact of a two-way substitution at different production stages and its impact on storage and machinery utilization. In a case study we quantify the relation between substitution, lot...

  17. Method and system for ethanol production

    Science.gov (United States)

    Feder, H.M.; Chen, M.J.

    1980-05-21

    A transition metal carbonyl and a tertiary amine are employed as a homogeneous catalytic system in methanol or a less volatile solvent to react methanol with carbon monoxide and hydrogen gas producing ethanol and carbon dioxide. The gas contains a high carbon monoxide to hydrogen ratio as is present in a typical gasifier product. The reaction has potential for anhydrous ethanol production as carbon dioxide rather than water is produced. The only other significant by-product is methane. Selected transition metal carbonyls include those of iron, ruthenium and possibly manganese and osmium. Selected amines include trimethylamine, N-Methylpyrrolidine, 24-diazabicyclooctane, dimethyneopentylamine and 2-pryidinol.

  18. Method and system for ethanol production

    Science.gov (United States)

    Feder, Harold M.; Chen, Michael J.

    1981-01-01

    A transition metal carbonyl and a tertiary amine are employed as a homogeneous catalytic system in methanol or a less volatile solvent to react methanol with carbon monoxide and hydrogen gas producing ethanol and carbon dioxide. The gas contains a high carbon monoxide to hydrogen ratio as is present in a typical gasifier product. The reaction has potential for anhydrous ethanol production as carbon dioxide rather than water is produced. The only other significant by product is methane. Selected transition metal carbonyls include those of iron, ruthenium and possibly manganese and osmium. Selected amines include trimethylamine, N-Methylpyrrolidine, 24-diazabicyclooctane, dimethyneopentylamine and 2-pryidinol.

  19. Business cases for product configuration systems

    DEFF Research Database (Denmark)

    Shafiee, Sara; Kristjansdottir, Katrin; Hvam, Lars

    In the recent years, product configuration systems (PCSs) have received greater attention from industries providing customized products as a response to increased demand to fulfil diverse customers’ needs for customized products. Before developing a PCS, a well-established business case has...... to be made in order to secure the success and delivery of the project as it will increase the commitment from the business side. This paper presents a framework for supporting the development of business cases for PCSs and discusses the experiences from multiple case studies benefiting from the suggested...

  20. Degradation Modelling for Health Monitoring Systems

    International Nuclear Information System (INIS)

    Stetter, R; Witczak, M

    2014-01-01

    Condition-monitoring plays an increasingly important role for technical processes in order to improve reliability, availability, maintenance and lifetime of equipment. With increasing demands for efficiency and product quality, plus progress in the integration of automatic control systems in high-cost mechatronic and critical safety processes, the field of health monitoring is gaining interest. A similar research field is concerned with an estimation of the remaining useful life. A central question in these fields is the modelling of degradation; degradation is a process of a gradual and irreversible accumulation of damage which will finally result in a failure of the system. This paper is based on a current research project and explores various degradation modelling techniques. These results are explained on the basis of an industrial product – a system for the generation of health status information for pump systems. The result of this fuzzy-logic based system is a single number indicating the current health of a pump system

  1. Corrosion products in power generating systems

    International Nuclear Information System (INIS)

    Lister, D.H.

    1980-06-01

    The important mechanisms of corrosion and corrosion product movement and fouling in the heat transport systems of thermal electric generating stations are reviewed. Oil- and coal-fired boilers are considered, along with nuclear power systems - both direct and indirect cycle. Thus, the fireside and waterside in conventional plants, and the primary coolant and steam-raising circuits in water-cooled reactors, are discussed. Corrosion products in organic- and liquid-metal-cooled reactors also are shown to cause problems if not controlled, while their beneficial effects on the cooling water side of condensers are described. (auth)

  2. Marginal cost calculation of energy production in hydro thermoelectric systems considering the transmission system

    International Nuclear Information System (INIS)

    Pereira, M.V.F.; Gorenstin, B.G.; Alvarenga Filho, S.

    1989-01-01

    The alternatives for calculation of energy marginal cost in hydroelectric systems, considering the transmission one, was analysed, including fundamental concepts; generation/transmission systems, represented by linear power flow model; production marginal costs in hydrothermal systems and computation aspects. (C.G.C.). 11 refs, 5 figs

  3. World energy projection system: Model documentation

    International Nuclear Information System (INIS)

    1992-06-01

    The World Energy Project System (WEPS) is an accounting framework that incorporates projects from independently documented models and assumptions about the future energy intensity of economic activity (ratios of total energy consumption divided by gross domestic product) and about the rate of incremental energy requirements met by hydropower, geothermal, coal, and natural gas to produce projections of world energy consumption published annually by the Energy Information Administration (EIA) in the International Energy Outlook (IEO) (Figure 1). Two independently documented models presented in Figure 1, the Oil Market Simulation (OMS) model and the World Integrated Nuclear Evaluation System (WINES) provide projections of oil and nuclear power consumption published in the IEO. Output from a third independently documented model, and the International Coal Trade Model (ICTM), is not published in the IEO but is used in WEPS as a supply check on projections of world coal consumption produced by WEPS and published in the IEO. A WEPS model of natural gas production documented in this report provides the same type of implicit supply check on the WEPS projections of world natural gas consumption published in the IEO. Two additional models are included in Figure 1, the OPEC Capacity model and the Non-OPEC Oil Production model. These WEPS models provide inputs to the OMS model and are documented in this report

  4. Product modelling: '20 years of stalemate'?

    DEFF Research Database (Denmark)

    Galle, Per

    1998-01-01

    In a recent special issue of Design Studies Michael Ramscar, John Lee, and Helen Pain level a severe criticism against a field of research known as product modeling; a criticism that would be rather damaging if it were based on cogent arguments. I shall argue in this paper that it is not....

  5. Kinetic model for polyhydroxybutyrate (PHB) production by ...

    African Journals Online (AJOL)

    A kinetic model that describes microbial growth, biopolymer production and substrate consumption is used to predict the performance of batch fermentation of Hydrogenophaga pseudoflava. H. pseudoflava DSMZ 1034 is useful in synthesizing polyhydroxyalkanoates (PHAs).The experimental data was also fitted with the ...

  6. A Production Model for Construction: A Theoretical Framework

    Directory of Open Access Journals (Sweden)

    Ricardo Antunes

    2015-03-01

    Full Text Available The building construction industry faces challenges, such as increasing project complexity and scope requirements, but shorter deadlines. Additionally, economic uncertainty and rising business competition with a subsequent decrease in profit margins for the industry demands the development of new approaches to construction management. However, the building construction sector relies on practices based on intuition and experience, overlooking the dynamics of its production system. Furthermore, researchers maintain that the construction industry has no history of the application of mathematical approaches to model and manage production. Much work has been carried out on how manufacturing practices apply to construction projects, mostly lean principles. Nevertheless, there has been little research to understand the fundamental mechanisms of production in construction. This study develops an in-depth literature review to examine the existing knowledge about production models and their characteristics in order to establish a foundation for dynamic production systems management in construction. As a result, a theoretical framework is proposed, which will be instrumental in the future development of mathematical production models aimed at predicting the performance and behaviour of dynamic project-based systems in construction.

  7. Modeling and estimating system availability

    International Nuclear Information System (INIS)

    Gaver, D.P.; Chu, B.B.

    1976-11-01

    Mathematical models to infer the availability of various types of more or less complicated systems are described. The analyses presented are probabilistic in nature and consist of three parts: a presentation of various analytic models for availability; a means of deriving approximate probability limits on system availability; and a means of statistical inference of system availability from sparse data, using a jackknife procedure. Various low-order redundant systems are used as examples, but extension to more complex systems is not difficult

  8. The model for estimation production cost of embroidery handicraft

    Science.gov (United States)

    Nofierni; Sriwana, IK; Septriani, Y.

    2017-12-01

    Embroidery industry is one of type of micro industry that produce embroidery handicraft. These industries are emerging in some rural areas of Indonesia. Embroidery clothing are produce such as scarves and clothes that show cultural value of certain region. The owner of an enterprise must calculate the cost of production before making a decision on how many products are received from the customer. A calculation approach to production cost analysis is needed to consider the feasibility of each order coming. This study is proposed to design the expert system (ES) in order to improve production management in the embroidery industry. The model will design used Fuzzy inference system as a model to estimate production cost. Research conducted based on survey and knowledge acquisitions from stakeholder of supply chain embroidery handicraft industry at Bukittinggi, West Sumatera, Indonesia. This paper will use fuzzy input where the quality, the complexity of the design and the working hours required and the result of the model are useful to manage production cost on embroidery production.

  9. Task management in the new ATLAS production system

    International Nuclear Information System (INIS)

    De, K; Golubkov, D; Klimentov, A; Potekhin, M; Vaniachine, A

    2014-01-01

    This document describes the design of the new Production System of the ATLAS experiment at the LHC [1]. The Production System is the top level workflow manager which translates physicists' needs for production level processing and analysis into actual workflows executed across over a hundred Grid sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. In the new design, the main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, DEFT manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. The JEDI component then dynamically translates the task definitions from DEFT into actual workload jobs executed in the PanDA Workload Management System [2]. We present the requirements, design parameters, basics of the object model and concrete solutions utilized in building the new Production System and its components.

  10. The Next Generation ATLAS Production System

    CERN Document Server

    Borodin, Mikhail; The ATLAS collaboration; Golubkov, Dmitry; Klimentov, Alexei; Maeno, Tadashi; Mashinistov, Ruslan; Vaniachine, Alexandre

    2015-01-01

    The ATLAS experiment at LHC data processing and simulation grows continuously, as more data and more use cases emerge. For data processing the ATLAS experiment adopted the data transformation approach, where software applications transform the input data into outputs. In the ATLAS production system, each data transformation is represented by a task, a collection of many jobs, dynamically submitted by the ATLAS workload management system (PanDA/JEDI) and executed on the Grid, clouds and supercomputers. Patterns in ATLAS data transformation workflows composed of many tasks provided a scalable production system framework for template definitions of the many-tasks workflows. User interface and system logic of these workflows are being implemented in the Database Engine for Tasks (DEFT). Such development required using modern computing technologies and approaches. We report technical details of this development: database implementation, server logic and Web user interface technologies.

  11. Development of Souvenir Production Transaction Processing System

    Science.gov (United States)

    Rumambi, H.; Kaparang, R.; Lintong, J.

    2018-01-01

    This research aims to design a souvenir production transaction processing system for the craftsmen in North Sulawesi. The craftsmen make very simple recordings about souvenir production transactions and use documents that are not in accordance with the generally accepted accounting practices. This research uses qualitative method. The data is collected through interviews, observations, documents and literatures studies. The research stages are conducted in preliminary studies, data collection, data analyzed and system design. The design of system is built from chart of account, accounting cycle and documents as input and get processed in accounting recording. The outputs are financial statements. The system design provides benefits for the craftsmen in assessing the financial performance and getting financing from bank.

  12. New design competences for localized production systems

    DEFF Research Database (Denmark)

    Eriksen, Kaare Riise; Morelli, Nicola

    2005-01-01

    This paper discusses the current development in production culture, based on local production networks. The role of the designer is put in perspective and outlined through a research project, Den Grønne Møbel (DGM), where different design areas were coordinated in a business concept...... and an organization involving different stakeholders. For several years now, DGM has been producing furniture from local materials, hereby aiming to create a new culture for well designed and environmentally sound furniture with a ‘story’. Although not totally new, this organizational model is particularly innovative...... in fully industrialized countries such as Denmark and represents an interesting alternative to globalized industrial production. Furthermore this case is an interesting opportunity to re-discuss the role and competences of designers in such new models. Tools and methods of the design profession...

  13. Life cycle assessment of agricultural biogas production systems

    International Nuclear Information System (INIS)

    Lansche, J.; Muller, J.

    2010-01-01

    Agricultural activities are large contributors to anthropogenic greenhouse gas emissions. This paper discussed the effectiveness of reducing agricultural emissions by using liquid manure to produce biogas. When using this technique, greenhouse gas emissions from manure storage are avoided and renewable energy is generated as heat and electricity in combined heat and power plants. The purpose of this study was to evaluate the environmental impacts of biogas production systems based on the methods of life cycle assessment. The traditional use of agricultural manures was compared with conventional energy production. The Gabi 4.3 software was used to create a model to evaluate the biogas production systems according to their environmental impact. In addition to the global warming potential, other impact categories were also used to evaluate the effects of the systems in eutrophication and acidification. It was concluded that environmental benefits can be obtained in terms of greenhouse gas emissions compared to electricity production from biogas with the typical German marginal electricity mix.

  14. Life cycle assessment of agricultural biogas production systems

    Energy Technology Data Exchange (ETDEWEB)

    Lansche, J.; Muller, J. [Hohenheim Univ., Stuttgart (Germany). Inst. of Agricultural Engineering, Tropical and Subtropical Group

    2010-07-01

    Agricultural activities are large contributors to anthropogenic greenhouse gas emissions. This paper discussed the effectiveness of reducing agricultural emissions by using liquid manure to produce biogas. When using this technique, greenhouse gas emissions from manure storage are avoided and renewable energy is generated as heat and electricity in combined heat and power plants. The purpose of this study was to evaluate the environmental impacts of biogas production systems based on the methods of life cycle assessment. The traditional use of agricultural manures was compared with conventional energy production. The Gabi 4.3 software was used to create a model to evaluate the biogas production systems according to their environmental impact. In addition to the global warming potential, other impact categories were also used to evaluate the effects of the systems in eutrophication and acidification. It was concluded that environmental benefits can be obtained in terms of greenhouse gas emissions compared to electricity production from biogas with the typical German marginal electricity mix.

  15. Fuel cell systems and production aspects

    Energy Technology Data Exchange (ETDEWEB)

    Blomen, L.J.M.J. [Blomenco, Rumpt (Netherlands)

    1995-02-01

    Attention is paid to some system integration and production aspects of fuel cell systems. After an introduction of the main performance differences of fuel cell systems with different types of fuel cells, and the causes for such differences, a few aspects of building up sub-systems towards large and small capacity fuel cell systems are being discussed. Subsequently, some production aspects are being highlighted: the concept of an automated plant and automated plant contracting, the trends towards greater simplicity m reactors, and a systematic evaluation of the differences in fuel processing steps required in systems with different types of fuel cells. In this section also the cost aspects of a total plant contracting project are being discussed. As a next step, some emphasis has been placed on system integration aspects, explaining that hydrogen purification does not always `destroy` system efficiency, and can be used in dispersed hydrogen generation concepts. Advanced system integration concepts include simplified flow sheet design, in which instead of special dedicated rotating equipment standard gas turbine rotary components are being employed. As an example, it is claimed that gas turbine - fuel cell combinations can be made with very high electrical efficiencies. 5 figs., 2 tabs.

  16. An anaerobic bioreactor system for biobutanol production

    Energy Technology Data Exchange (ETDEWEB)

    Paekkilae, J.; Hillukkala, T.; Myllykoski, L.; Keiski, R.L. (Univ. of Oulu, Dept. of Process and Environmental Engineering (Finland)). email: johanna.pakkila@oulu.fi

    2009-07-01

    evaporation, perstraction, pervaporation and reverse osmosis with high selectivity are the most promising product recovery techniques despite of the tendency for clogging and fouling. Process development to achieve an economical and efficient production process have been done also by genetic strain manipulation, regulation of substrate utilization and butanol production, by using cell immobilization or cell recycling, and by using different kinds of product recovery techniques. The aim of this research was to design and build a system for the anaerobic bacteria cultivation. The purpose was to discover suitable cultivation conditions for strict anaerobic clostridia bacteria

  17. Modeling the effects of ultrasound power and reactor dimension on the biodiesel production yield: Comparison of prediction abilities between response surface methodology (RSM) and adaptive neuro-fuzzy inference system (ANFIS)

    International Nuclear Information System (INIS)

    Mostafaei, Mostafa; Javadikia, Hossein; Naderloo, Leila

    2016-01-01

    Biodiesel is as an alternative petro-diesel fuel produced from the renewable resources. The use of novel technologies such as ultrasound technology for biodiesel production intensifies the reaction and reduces the process cost. The present study is aimed to evaluate and compare the prediction and simulating efficiency of the response surface methodology (RSM) and adaptive Neuro-fuzzy inference system (ANFIS) approaches for modeling the transesterification yield achieved in ultrasonic reactor. The influence of independent variables (reactor diameter, liquid height and ultrasound intensity) on the conversion of fatty acid methyl esters (FAME) was investigated by Box-Behnken design of RSM and two ANFIS approaches (hybrid and back-propagation optimization methods). All models were compared statistically based on the training and validation data set by the coefficient of determination (R2), root mean squares error (RMSE), mean absolute percentage error (MAPE), mean absolute error (MAE) and mean relative percent deviation (MRPD). The calculated R2 for RSM and two ANFIS models were 0.9669, 0.9812 and 0.9808, respectively. All models indicated good predictions, however, the ANFIS models were more precise compared to the RSM model, which proves that the ANFIS is a powerful tool for modeling and optimizing FAME production in ultrasound reactor. - Highlights: • The ultrasound assisted FAME conversion was modelled using RSM and ANFIS approaches. • The scatter diagrams indicate the models accurately predicted the reaction yield. • The ANFIS model (hybrid) has higher R 2 (0.9812) compared to the RSM model. • The predicted deviations and residual values are relatively small for ANFIS model. • ANFIS model was more accurate for predicting ultrasound assisted FAME conversion.

  18. Towards unification of product and enterprise system descriptions

    CSIR Research Space (South Africa)

    Erasmus, J

    2015-06-01

    Full Text Available An argument is presented for the unification of descriptions of product systems and enterprise systems. Product systems are developed and produced by enterprises, thus forming an integral part of the enterprise's architecture. However, many products...

  19. TAXATION SYSTEM AT INTRA PRODUCTION LEVEL

    Directory of Open Access Journals (Sweden)

    L. I. Podderegina

    2006-01-01

    Full Text Available The paper presents results of the analysis concerning taxation in the country at the level of an enteфrise and its structural sub-divisions in the period of transforming economy.Recommendations are given on the following aspects: modernization of income taxation system for natural persons; tax payment in case of wage computation; exclusion of tax payments and assignments fi-om production cost value which are not connected with the production process; tax computation for real property; evaluation of enterprise taxation level.The paper shows the possible cases concerning formation of tax payments and assignments of an enterprise and its structural sub-divisions.Taxation system is shown at the level of enterprise structural sub-divisions (shop, department, at the level of shop structural sub-divisions (section, team, for works to be executed by an individual person of the production process (operation, product, works, services. This system promotes to efficient functioning of intra-production economical relations.The paper provides possible variants of formation of taxation payments and assignments for an enterprise and its structural sub-divisions.

  20. Reference model for apparel product development

    Directory of Open Access Journals (Sweden)

    Isabel Cristina Moretti

    2017-03-01

    Full Text Available The purpose of this paper was to develop a reference model for the implementation of the process of product development (PDP for apparel. The tool was developed through an interactive process of comparison between theoretical. Managers in companies and professionals working in this market can utilize the reference model as a source for the organization and improvement of the PDP for apparel and the universities as a reference source for systematized teaching of this process. This model represents the first comprehensive attempt to develop an instrument at a detailed level (macro phases, phases, activities, inputs and outputs at each stage and at the gates to systematize the PDP process for fashion products and to consider its particularities.

  1. Use of the sensitivity analysis for multi-attributes decision models for oil exploration and production systems; Uso da analise de sensibilidade em modelos de decisao multiatributos para sistemas de exploracao e producao de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Furtado, Ricardo

    2000-07-01

    Today, oil companies must be able to survive in a hostile and competitive environment. Such environment involves volatility of oil prices, the narrow margins of profitability, and ever increasing environmental restrictions. In order to survive, firms must have the appropriate tools to consider the tradeoffs involving the financial, environmental, technological and of market parameters which are the key elements within the investment decision-making process. The aim of the present work is to analyze the behavior of the weights (relative importance) of the attributes int the multi-criteria decision model through a high dimension sensitivity analysis. Among the benefits of such method are: provide the analyst (decision-maker) with a better characterization and control of the weights of the attributes, providing the user with a clear view of the entire decision process. The methodology suggested in this dissertation was applied in two oil exploration and production case studies. The first case involved the selection of an exploratory target among three options. In this case, there is interaction of the objectives of the company, where financial, technological and of market parameters interact. In the second case, a hypothetical production project is suggested. For this second study, the decision-maker has the option of using one of the following production systems: a FPSO (Floating, Production, Storage and Offloading); a TLP (Tension Leg Platform); or a SS (Semi Submersible). The attributes for each one of the production systems are financial, technological and environmental. In this second case, the model makes it possible to simulate several options, providing the manager with the choice of the most appropriate production system to this objectives and preferences. (author)

  2. Multiscale simulation approach for battery production systems

    CERN Document Server

    Schönemann, Malte

    2017-01-01

    Addressing the challenge of improving battery quality while reducing high costs and environmental impacts of the production, this book presents a multiscale simulation approach for battery production systems along with a software environment and an application procedure. Battery systems are among the most important technologies of the 21st century since they are enablers for the market success of electric vehicles and stationary energy storage solutions. However, the performance of batteries so far has limited possible applications. Addressing this challenge requires an interdisciplinary understanding of dynamic cause-effect relationships between processes, equipment, materials, and environmental conditions. The approach in this book supports the integrated evaluation of improvement measures and is usable for different planning horizons. It is applied to an exemplary battery cell production and module assembly in order to demonstrate the effectiveness and potential benefits of the simulation.

  3. Assessing carbon footprints of dairy production systems

    Science.gov (United States)

    The farm-gate carbon footprint of milk quantifies the net greenhouse gas emissions of a dairy production system. Published values vary widely depending upon farm management practices and the calculation method used. Standard procedures for calculating the carbon footprint of milk are now established...

  4. Carbon footprint of dairy production systems

    Science.gov (United States)

    Greenhouse gas (GHG) emissions and their potential impact on global warming has become an important national and international concern. Dairy production systems along with all other types of animal agriculture are recognized as a source of GHG. Although little information exists on the net GHG emiss...

  5. Organic and conventional production systems, microbial fertilization ...

    African Journals Online (AJOL)

    A common belief among consumers is the superior quality of organically grown tomato fruits over their conventionally grown counterparts. The present study was performed to evaluate the quality characteristics of tomatoes grown using organic and conventional production systems and to determine the effects of microbial ...

  6. It is generally appreciated that estuaries are productive systems that ...

    African Journals Online (AJOL)

    spamer

    estuary types, i.e. permanently open and temporarily open/closed estuaries revealed a steeper regression slope and therefore greater productivity for the permanently open systems. Estuary size (ha) and type (five) were used to explain catches within the warm temperate and subtropical regions using general linear models.

  7. Modelling of reverberation enhancement systems

    OpenAIRE

    ROUCH , Jeremy; Schmich , Isabelle; Galland , Marie-Annick

    2012-01-01

    International audience; Electroacoustic enhancement systems are increasingly specified by acoustic consultants to address the requests for a multi-purpose use of performance halls. However, there is still a lack of simple models to predict the effect induced by these systems on the acoustic field. Two models are introduced to establish the impulse responses of a room equipped with a reverberation enhancement system. These models are based on passive impulse responses according to the modified...

  8. MODELLING OF MATERIAL FLOW SYSTEMS

    OpenAIRE

    PÉTER TELEK

    2012-01-01

    Material flow systems are in generally very complex processes. During design, building and operation of complex systems there are many different problems. If these complex processes can be described in a simple model, the tasks will be clearer, better adaptable and easier solvable. As the material flow systems are very different, so using models is a very important aid to create uniform methods and solutions. This paper shows the details of the application possibilities of modelling in the ma...

  9. Dynamic Modeling of ALS Systems

    Science.gov (United States)

    Jones, Harry

    2002-01-01

    The purpose of dynamic modeling and simulation of Advanced Life Support (ALS) systems is to help design them. Static steady state systems analysis provides basic information and is necessary to guide dynamic modeling, but static analysis is not sufficient to design and compare systems. ALS systems must respond to external input variations and internal off-nominal behavior. Buffer sizing, resupply scheduling, failure response, and control system design are aspects of dynamic system design. We develop two dynamic mass flow models and use them in simulations to evaluate systems issues, optimize designs, and make system design trades. One model is of nitrogen leakage in the space station, the other is of a waste processor failure in a regenerative life support system. Most systems analyses are concerned with optimizing the cost/benefit of a system at its nominal steady-state operating point. ALS analysis must go beyond the static steady state to include dynamic system design. All life support systems exhibit behavior that varies over time. ALS systems must respond to equipment operating cycles, repair schedules, and occasional off-nominal behavior or malfunctions. Biological components, such as bioreactors, composters, and food plant growth chambers, usually have operating cycles or other complex time behavior. Buffer sizes, material stocks, and resupply rates determine dynamic system behavior and directly affect system mass and cost. Dynamic simulation is needed to avoid the extremes of costly over-design of buffers and material reserves or system failure due to insufficient buffers and lack of stored material.

  10. Modeling soft interface dominated systems

    NARCIS (Netherlands)

    Lamorgese, A.; Mauri, R.; Sagis, L.M.C.

    2017-01-01

    The two main continuum frameworks used for modeling the dynamics of soft multiphase systems are the Gibbs dividing surface model, and the diffuse interface model. In the former the interface is modeled as a two dimensional surface, and excess properties such as a surface density, or surface energy

  11. Validation of systems biology models

    NARCIS (Netherlands)

    Hasdemir, D.

    2015-01-01

    The paradigm shift from qualitative to quantitative analysis of biological systems brought a substantial number of modeling approaches to the stage of molecular biology research. These include but certainly are not limited to nonlinear kinetic models, static network models and models obtained by the

  12. From Numeric Models to Granular System Modeling

    Directory of Open Access Journals (Sweden)

    Witold Pedrycz

    2015-03-01

    To make this study self-contained, we briefly recall the key concepts of granular computing and demonstrate how this conceptual framework and its algorithmic fundamentals give rise to granular models. We discuss several representative formal setups used in describing and processing information granules including fuzzy sets, rough sets, and interval calculus. Key architectures of models dwell upon relationships among information granules. We demonstrate how information granularity and its optimization can be regarded as an important design asset to be exploited in system modeling and giving rise to granular models. With this regard, an important category of rule-based models along with their granular enrichments is studied in detail.

  13. Structural system identification: Structural dynamics model validation

    Energy Technology Data Exchange (ETDEWEB)

    Red-Horse, J.R.

    1997-04-01

    Structural system identification is concerned with the development of systematic procedures and tools for developing predictive analytical models based on a physical structure`s dynamic response characteristics. It is a multidisciplinary process that involves the ability (1) to define high fidelity physics-based analysis models, (2) to acquire accurate test-derived information for physical specimens using diagnostic experiments, (3) to validate the numerical simulation model by reconciling differences that inevitably exist between the analysis model and the experimental data, and (4) to quantify uncertainties in the final system models and subsequent numerical simulations. The goal of this project was to develop structural system identification techniques and software suitable for both research and production applications in code and model validation.

  14. Coastal Modeling System Advanced Topics

    Science.gov (United States)

    2012-06-18

    22 June 2012 - Day 5  Debugging and Problem solving  Model Calibration  Post-processing Coastal and Hydraulics Laboratory Focus of...Efficiently: • The setup process is fast and without wasted time or effort 3 Coastal and Hydraulics Laboratory 4 Coastal Modeling System (CMS) What...is the CMS? Integrated wave, current, and morphology change model in the Surface- water Modeling System (SMS). Why CMS? Operational at 10

  15. The Models for Analysis of Interrelations between the Indicators of Investment Activity and the System of Indicators of Efficiency of Using the Potential of the Regional Meat and Meat Products Market

    Directory of Open Access Journals (Sweden)

    Pilko Andriy D.

    2017-03-01

    Full Text Available The aim of the publication is to provide the results of the analysis of existing approaches to the formulation and solution of the problem of evaluating the level of efficiency of using investment, production and consumption components of the potential of the regional market for meat and meat products in the context of its territorial systems as well as development of an own scientific and methodological approach to evaluating and analyzing the linkages between the effectiveness of using the components of the regional market for this food type and its determining factors, based on the development and use of possibilities of applied econometric models. With regard to the available statistical base, taking into account the results of studying management of the food and investment components of economic security, namely the works aimed at determining the indicators of investment activity, investment attractiveness and efficiency of using the investment climate of the territorial systems of the region, the investment attractiveness of economic activities, and the consumer and production potentials of the regional market for meat and meat products, there carried out an appropriate analysis of the effectiveness of the factors facilitating the food component of regional development security based on the evaluation of the parameters of the simulative econometric models.

  16. Safeguards system effectiveness modeling

    International Nuclear Information System (INIS)

    Bennett, H.A.; Boozer, D.D.; Chapman, L.D.; Daniel, S.L.; Engi, D.; Hulme, B.L.; Varnado, G.B.

    1976-01-01

    A general methodology for the comparative evaluation of physical protection system effectiveness at nuclear facilities is presently under development. The approach is applicable to problems of sabotage or theft at fuel cycle facilities. The overall methodology and the primary analytic techniques used to assess system effectiveness are briefly outlined

  17. Safeguards system effectiveness modeling

    International Nuclear Information System (INIS)

    Bennett, H.A.; Boozer, D.D.; Chapman, L.D.; Daniel, S.L.; Engi, D.; Hulme, B.L.; Varnado, G.B.

    1976-01-01

    A general methodology for the comparative evaluation of physical protection system effectiveness at nuclear facilities is presently under development. The approach is applicable to problems of sabotage or theft at fuel cycle facilities. In this paper, the overall methodology and the primary analytic techniques used to assess system effectiveness are briefly outlined

  18. Habitat connectivity and ecosystem productivity: implications from a simple model.

    Science.gov (United States)

    Cloern, J.E.

    2007-01-01

    The import of resources (food, nutrients) sustains biological production and food webs in resource-limited habitats. Resource export from donor habitats subsidizes production in recipient habitats, but the ecosystem-scale consequences of resource translocation are generally unknown. Here, I use a nutrient-phytoplankton-zooplankton model to show how dispersive connectivity between a shallow autotrophic habitat and a deep heterotrophic pelagic habitat can amplify overall system production in metazoan food webs. This result derives from the finite capacity of suspension feeders to capture and assimilate food particles: excess primary production in closed autotrophic habitats cannot be assimilated by consumers; however, if excess phytoplankton production is exported to food-limited heterotrophic habitats, it can be assimilated by zooplankton to support additional secondary production. Transport of regenerated nutrients from heterotrophic to autotrophic habitats sustains higher system primary production. These simulation results imply that the ecosystem-scale efficiency of nutrient transformation into metazoan biomass can be constrained by the rate of resource exchange across habitats and that it is optimized when the transport rate matches the growth rate of primary producers. Slower transport (i.e., reduced connectivity) leads to nutrient limitation of primary production in autotrophic habitats and food limitation of secondary production in heterotrophic habitats. Habitat fragmentation can therefore impose energetic constraints on the carrying capacity of aquatic ecosystems. The outcomes of ecosystem restoration through habitat creation will be determined by both functions provided by newly created aquatic habitats and the rates of hydraulic connectivity between them.

  19. Production planning and control of less emitting production systems

    Energy Technology Data Exchange (ETDEWEB)

    Haasis, H.D. [Bremen Univ. (Germany)

    1995-12-31

    The concept of integral environmental protection has been growing in importance within Western Europe in recent years. Increasingly, it has come to be recognized that no one part of the environment is separate from any other, it functions as a whole. Yet, pollution control was until recently, usually based on an approach which considers emissions to air, water, and land separately. That has begun to change, particularly since the 1987 report by the World Commission on Environment and Development. This can be recognized, for example, within the proposal for a Directive of the Council of the European Union on Integrated Pollution Prevention and Control. By this, the environmental media are placed on an equal legislative footing so that the final result will be that the way in which an installation is operated will be better for the whole environment. In other words, less emission production systems are obtained. Realization of an integral concept or of less emission production systems initially requires technical measures for the avoidance and the minimization of emissions, as well as recovery and recycling of materials and substances

  20. Systems Biology in Animal Production and Health

    DEFF Research Database (Denmark)

    for improved animal production and health. The book will contain online resources where additional data and programs can be accessed. Some chapters also come with computer programming codes and example datasets to provide readers hands-on (computer) exercises. This second volume deals with integrated modeling...... and analyses of multi-omics datasets from theoretical and computational approaches and presents their applications in animal production and health as well as veterinary medicine to improve diagnosis, prevention and treatment of animal diseases. This book is suitable for both students and teachers in animal...

  1. Constructed wetlands as biofuel production systems

    Science.gov (United States)

    Liu, Dong; Wu, Xu; Chang, Jie; Gu, Baojing; Min, Yong; Ge, Ying; Shi, Yan; Xue, Hui; Peng, Changhui; Wu, Jianguo

    2012-03-01

    Clean biofuel production is an effective way to mitigate global climate change and energy crisis. Progress has been made in reducing greenhouse-gas (GHG) emissions and nitrogen fertilizer consumption through biofuel production. Here we advocate an alternative approach that efficiently produces cellulosic biofuel and greatly reduces GHG emissions using waste nitrogen through wastewater treatment with constructed wetlands in China. Our combined experimental and literature data demonstrate that the net life-cycle energy output of constructed wetlands is higher than that of corn, soybean, switchgrass, low-input high-diversity grassland and algae systems. Energy output from existing constructed wetlands is ~237% of the input for biofuel production and can be enhanced through optimizing the nitrogen supply, hydrologic flow patterns and plant species selection. Assuming that all waste nitrogen in China could be used by constructed wetlands, biofuel production can account for 6.7% of national gasoline consumption. We also find that constructed wetlands have a greater GHG reduction than the existing biofuel production systems in a full life-cycle analysis. This alternative approach is worth pursuing because of its great potential for straightforward operation, its economic competitiveness and many ecological benefits.

  2. A prototype of a documentation system that supports the development and maintenance of product configuration systems

    DEFF Research Database (Denmark)

    Haug, Anders; Degn, Anders; Poulsen, Bjarne

    2007-01-01

    Product configuration systems (PCSs) can be defined as product-oriented expert systems that allow users to specify products while restricting how different elements and properties may be combined. For several companies the use of PCSs has led to improvements of product specification processes......, no software exists which supports all three techniques in an integrated fashion. This means that when developing PCSs based on this procedure there is no automatic integration between the created models. Therefore, for some years, researchers have worked on creating a basis for developing a documentation...

  3. Evolution of tsunami warning systems and products.

    Science.gov (United States)

    Bernard, Eddie; Titov, Vasily

    2015-10-28

    Each year, about 60 000 people and $4 billion (US$) in assets are exposed to the global tsunami hazard. Accurate and reliable tsunami warning systems have been shown to provide a significant defence for this flooding hazard. However, the evolution of warning systems has been influenced by two processes: deadly tsunamis and available technology. In this paper, we explore the evolution of science and technology used in tsunami warning systems, the evolution of their products using warning technologies, and offer suggestions for a new generation of warning products, aimed at the flooding nature of the hazard, to reduce future tsunami impacts on society. We conclude that coastal communities would be well served by receiving three standardized, accurate, real-time tsunami warning products, namely (i) tsunami energy estimate, (ii) flooding maps and (iii) tsunami-induced harbour current maps to minimize the impact of tsunamis. Such information would arm communities with vital flooding guidance for evacuations and port operations. The advantage of global standardized flooding products delivered in a common format is efficiency and accuracy, which leads to effectiveness in promoting tsunami resilience at the community level. © 2015 The Authors.

  4. MILK PRODUCTION IN INTEGRATED SYSTEMS: REVIEW

    Directory of Open Access Journals (Sweden)

    H. A. Z. Biavatti

    2014-09-01

    Full Text Available The pasture degradation and thermic stress are in economic trouble for milk producers. The use of silvopastoral system (SSP is an important tool to minimize this loss, since it combines the production and conservation of natural resources, furthermore, provides the producer the potential to diversify the source of income of rural property, it is possible sale or own use of the products generated by the trees as timber, firewood and fruit. With the implementation of the SSP is possible to attenuate the effects of high temperatures caused by direct solar incidence on the animals, providing an ideal thermal comfort zone, resulting in increased production, it will expend less energy so that the animals are able to be as close as possible the necessary thermal comfort. Besides, with the adoption of this system, occurs a minor pasture degradation by promoting the formation of a microclimate favoring their establishment and maintenance, in addition to stabilizing soils, unpacked action of roots and preventing erosion. The purpose of this work was study the main aspects that affect the production of milk, proposing the use of integrated systems to minimize losses from thermal stress and degradation of pastures.

  5. Evolution of tsunami warning systems and products

    Science.gov (United States)

    Bernard, Eddie; Titov, Vasily

    2015-01-01

    Each year, about 60 000 people and $4 billion (US$) in assets are exposed to the global tsunami hazard. Accurate and reliable tsunami warning systems have been shown to provide a significant defence for this flooding hazard. However, the evolution of warning systems has been influenced by two processes: deadly tsunamis and available technology. In this paper, we explore the evolution of science and technology used in tsunami warning systems, the evolution of their products using warning technologies, and offer suggestions for a new generation of warning products, aimed at the flooding nature of the hazard, to reduce future tsunami impacts on society. We conclude that coastal communities would be well served by receiving three standardized, accurate, real-time tsunami warning products, namely (i) tsunami energy estimate, (ii) flooding maps and (iii) tsunami-induced harbour current maps to minimize the impact of tsunamis. Such information would arm communities with vital flooding guidance for evacuations and port operations. The advantage of global standardized flooding products delivered in a common format is efficiency and accuracy, which leads to effectiveness in promoting tsunami resilience at the community level. PMID:26392620

  6. Terahertz spectroscopy applied to food model systems

    DEFF Research Database (Denmark)

    Møller, Uffe

    Water plays a crucial role in the quality of food. Apart from the natural water content of a food product, the state of that water is very important. Water can be found integrated into the biological material or it can be added during production of the product. Currently it is difficult to differ......Water plays a crucial role in the quality of food. Apart from the natural water content of a food product, the state of that water is very important. Water can be found integrated into the biological material or it can be added during production of the product. Currently it is difficult...... to differentiate between these types of water in subsequent quality controls. This thesis describes terahertz time-domain spectroscopy applied on aqueous food model systems, with particular focus on ethanol-water mixtures and confined water pools in inverse micelles....

  7. Conception of Self-Construction Production Scheduling System

    Science.gov (United States)

    Xue, Hai; Zhang, Xuerui; Shimizu, Yasuhiro; Fujimura, Shigeru

    With the high speed innovation of information technology, many production scheduling systems have been developed. However, a lot of customization according to individual production environment is required, and then a large investment for development and maintenance is indispensable. Therefore now the direction to construct scheduling systems should be changed. The final objective of this research aims at developing a system which is built by it extracting the scheduling technique automatically through the daily production scheduling work, so that an investment will be reduced. This extraction mechanism should be applied for various production processes for the interoperability. Using the master information extracted by the system, production scheduling operators can be supported to accelerate the production scheduling work easily and accurately without any restriction of scheduling operations. By installing this extraction mechanism, it is easy to introduce scheduling system without a lot of expense for customization. In this paper, at first a model for expressing a scheduling problem is proposed. Then the guideline to extract the scheduling information and use the extracted information is shown and some applied functions are also proposed based on it.

  8. GASCAP: Wellhead Gas Productive Capacity Model documentation, June 1993

    International Nuclear Information System (INIS)

    1993-01-01

    The Wellhead Gas Productive Capacity Model (GASCAP) has been developed by EIA to provide a historical analysis of the monthly productive capacity of natural gas at the wellhead and a projection of monthly capacity for 2 years into the future. The impact of drilling, oil and gas price assumptions, and demand on gas productive capacity are examined. Both gas-well gas and oil-well gas are included. Oil-well gas productive capacity is estimated separately and then combined with the gas-well gas productive capacity. This documentation report provides a general overview of the GASCAP Model, describes the underlying data base, provides technical descriptions of the component models, diagrams the system and subsystem flow, describes the equations, and provides definitions and sources of all variables used in the system. This documentation report is provided to enable users of EIA projections generated by GASCAP to understand the underlying procedures used and to replicate the models and solutions. This report should be of particular interest to those in the Congress, Federal and State agencies, industry, and the academic community, who are concerned with the future availability of natural gas

  9. Hydrogen production from biomass by biological systems

    International Nuclear Information System (INIS)

    Sharifan, H.R.; Qader, S.

    2009-01-01

    Hydrogen gas is seen as a future energy carrier, not involved in 'greenhouse' gas and its released energy in combustion can be converted to electric power. Biological system with low energy can produce hydrogen compared to electrochemical hydrogen production via solar battery-based water splitting which requires the use of solar batteries with high energy requirements. The biological hydrogen production occurs in microalgae and cyanobacteria by photosynthesis. They consume biochemical energy to produce molecular hydrogen. Hydrogen in some algae is an anaerobic production in the absence of light. In cyanobacteria the hydrogen production simultaneously happens with nitrogen fixation, and also catalyzed by nitrogenase as a side reaction. Hydrogen production by photosynthetic bacteria is mediated by nitrogenase activity, although hydrogenases may be active for both hydrogen production and hydrogen uptake under some conditions. Genetic studies on photosynthetic microorganisms have markedly increased in recent times, relatively few genetic engineering studies have focused on altering the characteristics of these microorganisms, particularly with respect to enhancing the hydrogen-producing capabilities of photosynthetic bacteria and cyanobacteria. (author)

  10. Auditing Information System : Delivery Product Service

    Directory of Open Access Journals (Sweden)

    Purwoko Purwoko

    2011-05-01

    Full Text Available Purpose of the research is to ensure the securities of information system asset and to ensure if informa-tion system support the operational and data collected was valid. Research method that used in this research were library studies and field studies. Field studies such an observation, questioner, and inter-view. the expected result are founding the weakness of security management control, operational man-agement control, input control, and output control of risk happened in the company. Conclusion of this research are the system on the company work good and there’s no potential risk happened and make an impact to the delivery process of information system.Index Terms - Auditing Information system, Delivery product process.

  11. Model of the Product Development Lifecycle.

    Energy Technology Data Exchange (ETDEWEB)

    He, Sunny L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Roe, Natalie H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wood, Evan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nachtigal, Noel M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Helms, Jovana [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    While the increased use of Commercial Off-The-Shelf information technology equipment has presented opportunities for improved cost effectiveness and flexibility, the corresponding loss of control over the product's development creates unique vulnerabilities and security concerns. Of particular interest is the possibility of a supply chain attack. A comprehensive model for the lifecycle of hardware and software products is proposed based on a survey of existing literature from academic, government, and industry sources. Seven major lifecycle stages are identified and defined: (1) Requirements, (2) Design, (3) Manufacturing for hardware and Development for software, (4) Testing, (5) Distribution, (6) Use and Maintenance, and (7) Disposal. The model is then applied to examine the risk of attacks at various stages of the lifecycle.

  12. Models of complex attitude systems

    DEFF Research Database (Denmark)

    Sørensen, Bjarne Taulo

    Existing research on public attitudes towards agricultural production systems is largely descriptive, abstracting from the processes through which members of the general public generate their evaluations of such systems. The present paper adopts a systems perspective on such evaluations, understa......Existing research on public attitudes towards agricultural production systems is largely descriptive, abstracting from the processes through which members of the general public generate their evaluations of such systems. The present paper adopts a systems perspective on such evaluations......, understanding them as embedded into a wider attitude system that consists of attitudes towards objects of different abstraction levels, ranging from personal value orientations over general socio-political attitudes to evaluations of specific characteristics of agricultural production systems. It is assumed...... that evaluative affect propagates through the system in such a way that the system becomes evaluatively consistent and operates as a schema for the generation of evaluative judgments. In the empirical part of the paper, the causal structure of an attitude system from which people derive their evaluations of pork...

  13. Sustainable crop models for fruit, vegetable and flower quality productions.

    Directory of Open Access Journals (Sweden)

    Inglese Paolo

    2011-02-01

    Full Text Available Sustainable development is a paradigm that has evolved over the time, since the ideas of socially acceptable and compatible development, on which it was originally based, are now supported by the more recent notions of ecological equilibria and production process economy, both of which need to be also preserved. Environmental and health safety, rational use of the natural resources and technological tools, upkeep of high social growth rates and respect of a social equity are the basis of the sustainability for any production process, including the agriculture. The new globalization framework has penalized small farms and, at the same time, has put serious constraints to the development of stronger economic systems (medium/large farms, as well. As consequence, the EU has outlined several strategic programs to support small agricultural systems in marginal areas by: 1 strengthening all the quality- related aspects of agricultural production, including nutritional and cultural traits associated to local, typical and in some cases to neglected crops; 2 improving traditional cultural practices by adapting the cropping cycles and fomenting new partnerships between the different parts of the production chain, as for example; promotion of small horticultural chains. Specific political actions for the horticultural production sector have also been developed. Some of these policies are specifically addressed to preserve the biodiversity and to create quality labels certifying typical and/or organic products. All of these are possible strategies that may counteract and cope with the globalization process and increase the competitiveness of many production systems especially those performed by local and small entrepreneurs. New sustainable development models are required by both the market and the implicit requirements of the production system, inside a context on which Europe must face with new emerging economies with lower production costs, by increasing

  14. Bioelectrochemical Systems for Indirect Biohydrogen Production

    KAUST Repository

    Regan, John M.

    2014-01-01

    Bioelectrochemical systems involve the use of exoelectrogenic (i.e., anode-reducing) microbes to produce current in conjunction with the oxidation of reduced compounds. This current can be used directly for power in a microbial fuel cell, but there are alternate uses of this current. One such alternative is the production of hydrogen in a microbial electrolysis cell (MEC), which accomplishes cathodic proton reduction with a slight applied potential by exploiting the low redox potential produced by exoelectrogens at the anode. As an indirect approach to biohydrogen production, these systems are not subject to the hydrogen yield constraints of fermentative processes and have been proven to work with virtually any biodegradable organic substrate. With continued advancements in reactor design to reduce the system internal resistance, increase the specific surface area for anode biofilm development, and decrease the material costs, MECs may emerge as a viable alternative technology for biohydrogen production. Moreover, these systems can also incorporate other value-added functionalities for applications in waste treatment, desalination, and bioremediation.

  15. Constraining supergravity models from gluino production

    International Nuclear Information System (INIS)

    Barbieri, R.; Gamberini, G.; Giudice, G.F.; Ridolfi, G.

    1988-01-01

    The branching ratios for gluino decays g tilde → qanti qΧ, g tilde → gΧ into a stable undetected neutralino are computed as functions of the relevant parameters of the underlying supergravity theory. A simple way of constraining supergravity models from gluino production emerges. The effectiveness of hadronic versus e + e - colliders in the search for supersymmetry can be directly compared. (orig.)

  16. Systems Biology in Animal Production and Health

    DEFF Research Database (Denmark)

    This two-volume work provides an overview on various state of the art experimental and statistical methods, modeling approaches and software tools that are available to generate, integrate and analyze multi-omics datasets in order to detect biomarkers, genetic markers and potential causal genes...... for improved animal production and health. The book will contain online resources where additional data and programs can be accessed. Some chapters also come with computer programming codes and example datasets to provide readers hands-on (computer) exercises. This second volume deals with integrated modeling...... and analyses of multi-omics datasets from theoretical and computational approaches and presents their applications in animal production and health as well as veterinary medicine to improve diagnosis, prevention and treatment of animal diseases. This book is suitable for both students and teachers in animal...

  17. Territory, competitive advantages and local productive systems

    OpenAIRE

    Monarca U.

    2007-01-01

    This work aims at analyzing if, as often indicated by theoretical and empirical literature, the "territory" variable shows local development dynamics. A review of the districts phenomenon has favoured the attempt to integrate modern economical trends in this consolidated productive model, with particular emphasis on firm internationalization, market globalisation and the IT developments, including business services as well. The work underlines two implication of this innovative approach: the ...

  18. Systems biology of microbial exopolysaccharides production

    Directory of Open Access Journals (Sweden)

    Ozlem eAtes

    2015-12-01

    Full Text Available Exopolysaccharides (EPS produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture and medicine. EPSs are mainly associated with high-value applications and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore a systems-based approach constitutes an important step towards understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan and dextran.

  19. Systems Biology of Microbial Exopolysaccharides Production.

    Science.gov (United States)

    Ates, Ozlem

    2015-01-01

    Exopolysaccharides (EPSs) produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture, and medicine. EPSs are mainly associated with high-value applications, and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However, only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover, a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore, a systems-based approach constitutes an important step toward understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism, and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan, and dextran.

  20. Particle size distribution of selected electronic nicotine delivery system products.

    Science.gov (United States)

    Oldham, Michael J; Zhang, Jingjie; Rusyniak, Mark J; Kane, David B; Gardner, William P

    2018-03-01

    Dosimetry models can be used to predict the dose of inhaled material, but they require several parameters including particle size distribution. The reported particle size distributions for aerosols from electronic nicotine delivery system (ENDS) products vary widely and don't always identify a specific product. A low-flow cascade impactor was used to determine the particle size distribution [mass median aerodynamic diameter (MMAD); geometric standard deviation (GSD)] from 20 different cartridge based ENDS products. To assess losses and vapor phase amount, collection efficiency of the system was measured by comparing the collected mass in the impactor to the difference in ENDS product mass. The levels of nicotine, glycerin, propylene glycol, water, and menthol in the formulations of each product were also measured. Regardless of the ENDS product formulation, the MMAD of all tested products was similar and ranged from 0.9 to 1.2 μm with a GSD ranging from 1.7 to 2.2. There was no consistent pattern of change in the MMAD and GSD as a function of number of puffs (cartridge life). The collection efficiency indicated that 9%-26% of the generated mass was deposited in the collection system or was in the vapor phase. The particle size distribution data are suitable for use in aerosol dosimetry programs. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  1. Hybrid Energy System Modeling in Modelica

    Energy Technology Data Exchange (ETDEWEB)

    William R. Binder; Christiaan J. J. Paredis; Humberto E. Garcia

    2014-03-01

    In this paper, a Hybrid Energy System (HES) configuration is modeled in Modelica. Hybrid Energy Systems (HES) have as their defining characteristic the use of one or more energy inputs, combined with the potential for multiple energy outputs. Compared to traditional energy systems, HES provide additional operational flexibility so that high variability in both energy production and consumption levels can be absorbed more effectively. This is particularly important when including renewable energy sources, whose output levels are inherently variable, determined by nature. The specific HES configuration modeled in this paper include two energy inputs: a nuclear plant, and a series of wind turbines. In addition, the system produces two energy outputs: electricity and synthetic fuel. The models are verified through simulations of the individual components, and the system as a whole. The simulations are performed for a range of component sizes, operating conditions, and control schemes.

  2. Mechanical Systems, Classical Models

    CERN Document Server

    Teodorescu, Petre P

    2007-01-01

    All phenomena in nature are characterized by motion; this is an essential property of matter, having infinitely many aspects. Motion can be mechanical, physical, chemical or biological, leading to various sciences of nature, mechanics being one of them. Mechanics deals with the objective laws of mechanical motion of bodies, the simplest form of motion. In the study of a science of nature mathematics plays an important role. Mechanics is the first science of nature which was expressed in terms of mathematics by considering various mathematical models, associated to phenomena of the surrounding nature. Thus, its development was influenced by the use of a strong mathematical tool; on the other hand, we must observe that mechanics also influenced the introduction and the development of many mathematical notions. In this respect, the guideline of the present book is precisely the mathematical model of mechanics. A special accent is put on the solving methodology as well as on the mathematical tools used; vectors, ...

  3. Stochastic Modelling of Energy Systems

    DEFF Research Database (Denmark)

    Andersen, Klaus Kaae

    2001-01-01

    In this thesis dynamic models of typical components in Danish heating systems are considered. Emphasis is made on describing and evaluating mathematical methods for identification of such models, and on presentation of component models for practical applications. The thesis consists of seven...... of component models, such as e.g. heat exchanger and valve models, adequate for system simulations. Furthermore, the thesis demonstrates and discusses the advantages and disadvantages of using statistical methods in conjunction with physical knowledge in establishing adequate component models of heating...... research papers (case studies) together with a summary report. Each case study takes it's starting point in typical heating system components and both, the applied mathematical modelling methods and the application aspects, are considered. The summary report gives an introduction to the scope...

  4. Multi-Sensor Aerosol Products Sampling System

    Science.gov (United States)

    Petrenko, M.; Ichoku, C.; Leptoukh, G.

    2011-01-01

    Global and local properties of atmospheric aerosols have been extensively observed and measured using both spaceborne and ground-based instruments, especially during the last decade. Unique properties retrieved by the different instruments contribute to an unprecedented availability of the most complete set of complimentary aerosol measurements ever acquired. However, some of these measurements remain underutilized, largely due to the complexities involved in analyzing them synergistically. To characterize the inconsistencies and bridge the gap that exists between the sensors, we have established a Multi-sensor Aerosol Products Sampling System (MAPSS), which consistently samples and generates the spatial statistics (mean, standard deviation, direction and rate of spatial variation, and spatial correlation coefficient) of aerosol products from multiple spacebome sensors, including MODIS (on Terra and Aqua), MISR, OMI, POLDER, CALIOP, and SeaWiFS. Samples of satellite aerosol products are extracted over Aerosol Robotic Network (AERONET) locations as well as over other locations of interest such as those with available ground-based aerosol observations. In this way, MAPSS enables a direct cross-characterization and data integration between Level-2 aerosol observations from multiple sensors. In addition, the available well-characterized co-located ground-based data provides the basis for the integrated validation of these products. This paper explains the sampling methodology and concepts used in MAPSS, and demonstrates specific examples of using MAPSS for an integrated analysis of multiple aerosol products.

  5. Fully automatic CNC machining production system

    Directory of Open Access Journals (Sweden)

    Lee Jeng-Dao

    2017-01-01

    Full Text Available Customized manufacturing is increasing years by years. The consumption habits change has been cause the shorter of product life cycle. Therefore, many countries view industry 4.0 as a target to achieve more efficient and more flexible automated production. To develop an automatic loading and unloading CNC machining system via vision inspection is the first step in industrial upgrading. CNC controller is adopted as the main controller to command to the robot, conveyor, and other equipment in this study. Moreover, machine vision systems are used to detect position of material on the conveyor and the edge of the machining material. In addition, Open CNC and SCADA software will be utilized to make real-time monitor, remote system of control, alarm email notification, and parameters collection. Furthermore, RFID has been added to employee classification and management. The machine handshaking has been successfully proposed to achieve automatic vision detect, edge tracing measurement, machining and system parameters collection for data analysis to accomplish industrial automation system integration with real-time monitor.

  6. Factors affecting production of an antilisterial bacteriocin by Carnobacterium piscicola strain A9b in laboratory media and model fish systems

    DEFF Research Database (Denmark)

    Himelbloom, B.; Nilsson, Lilian; Gram, Lone

    2001-01-01

    in APT broth when a low inoculum level (0.001%) was used. In contrast, inoculum level did not influence bacteriocin production in BHI and MRS7 without glucose. Bacteriocin production in APT was induced by the presence of an extracellular compound present in the sterile, filtered, cell- free supernatant...... fluid of a stationary-phase culture. Increasing concentrations of NaCl (2-7%) reduced bacteriocin production and maximum cell density of C. piscicola A9b when grown in cooked fish juice at VC. Conclusions: Media composition, inoculum level and sodium chloride concentration affected production...

  7. Rice production model based on the concept of ecological footprint

    Science.gov (United States)

    Faiz, S. A.; Wicaksono, A. D.; Dinanti, D.

    2017-06-01

    Pursuant to what had been stated in Region Spatial Planning (RTRW) of Malang Regency for period 2010-2030, Malang Regency was considered as the center of agricultural development, including districts bordered with Malang City. To protect the region functioning as the provider of rice production, then the policy of sustainable food farming-land (LP2B) was made which its implementation aims to protect rice-land. In the existing condition, LP2B system was not maximally executed, and it caused a limited extend of rice-land to deliver rice production output. One cause related with the development of settlements and industries due to the effect of Malang City that converted land-function. Location of research focused on 30 villages with direct border with Malang City. Review was conducted to develop a model of relation between farming production output and ecological footprint variables. These variables include rice-land area (X1), built land percentage (X2), and number of farmers (X3). Analysis technique was regression. Result of regression indicated that the model of rice production output Y=-207,983 + 10.246X1. Rice-land area (X1) was the most influential independent variable. It was concluded that of villages directly bordered with Malang City, there were 11 villages with higher production potential because their rice production yield was more than 1,000 tons/year, while 12 villages were threatened with low production output because its rice production yield only attained 500 tons/year. Based on the model and the spatial direction of RTRW, it can be said that the direction for the farming development policy must be redesigned to maintain rice-land area on the regions on which agricultural activity was still dominant. Because rice-land area was the most influential factor to farming production. Therefore, the wider the rice-land is, the higher rice production output is on each village.

  8. Satellite-based terrestrial production efficiency modeling

    Directory of Open Access Journals (Sweden)

    Obersteiner Michael

    2009-09-01

    Full Text Available Abstract Production efficiency models (PEMs are based on the theory of light use efficiency (LUE which states that a relatively constant relationship exists between photosynthetic carbon uptake and radiation receipt at the canopy level. Challenges remain however in the application of the PEM methodology to global net primary productivity (NPP monitoring. The objectives of this review are as follows: 1 to describe the general functioning of six PEMs (CASA; GLO-PEM; TURC; C-Fix; MOD17; and BEAMS identified in the literature; 2 to review each model to determine potential improvements to the general PEM methodology; 3 to review the related literature on satellite-based gross primary productivity (GPP and NPP modeling for additional possibilities for improvement; and 4 based on this review, propose items for coordinated research. This review noted a number of possibilities for improvement to the general PEM architecture - ranging from LUE to meteorological and satellite-based inputs. Current PEMs tend to treat the globe similarly in terms of physiological and meteorological factors, often ignoring unique regional aspects. Each of the existing PEMs has developed unique methods to estimate NPP and the combination of the most successful of these could lead to improvements. It may be beneficial to develop regional PEMs that can be combined under a global framework. The results of this review suggest the creation of a hybrid PEM could bring about a significant enhancement to the PEM methodology and thus terrestrial carbon flux modeling. Key items topping the PEM research agenda identified in this review include the following: LUE should not be assumed constant, but should vary by plant functional type (PFT or photosynthetic pathway; evidence is mounting that PEMs should consider incorporating diffuse radiation; continue to pursue relationships between satellite-derived variables and LUE, GPP and autotrophic respiration (Ra; there is an urgent need for

  9. Satellite-based terrestrial production efficiency modeling.

    Science.gov (United States)

    McCallum, Ian; Wagner, Wolfgang; Schmullius, Christiane; Shvidenko, Anatoly; Obersteiner, Michael; Fritz, Steffen; Nilsson, Sten

    2009-09-18

    Production efficiency models (PEMs) are based on the theory of light use efficiency (LUE) which states that a relatively constant relationship exists between photosynthetic carbon uptake and radiation receipt at the canopy level. Challenges remain however in the application of the PEM methodology to global net primary productivity (NPP) monitoring. The objectives of this review are as follows: 1) to describe the general functioning of six PEMs (CASA; GLO-PEM; TURC; C-Fix; MOD17; and BEAMS) identified in the literature; 2) to review each model to determine potential improvements to the general PEM methodology; 3) to review the related literature on satellite-based gross primary productivity (GPP) and NPP modeling for additional possibilities for improvement; and 4) based on this review, propose items for coordinated research.This review noted a number of possibilities for improvement to the general PEM architecture - ranging from LUE to meteorological and satellite-based inputs. Current PEMs tend to treat the globe similarly in terms of physiological and meteorological factors, often ignoring unique regional aspects. Each of the existing PEMs has developed unique methods to estimate NPP and the combination of the most successful of these could lead to improvements. It may be beneficial to develop regional PEMs that can be combined under a global framework. The results of this review suggest the creation of a hybrid PEM could bring about a significant enhancement to the PEM methodology and thus terrestrial carbon flux modeling.Key items topping the PEM research agenda identified in this review include the following: LUE should not be assumed constant, but should vary by plant functional type (PFT) or photosynthetic pathway; evidence is mounting that PEMs should consider incorporating diffuse radiation; continue to pursue relationships between satellite-derived variables and LUE, GPP and autotrophic respiration (Ra); there is an urgent need for satellite-based biomass

  10. Modeling population exposures to silver nanoparticles present in consumer products

    Science.gov (United States)

    Royce, Steven G.; Mukherjee, Dwaipayan; Cai, Ting; Xu, Shu S.; Alexander, Jocelyn A.; Mi, Zhongyuan; Calderon, Leonardo; Mainelis, Gediminas; Lee, KiBum; Lioy, Paul J.; Tetley, Teresa D.; Chung, Kian Fan; Zhang, Junfeng; Georgopoulos, Panos G.

    2014-11-01

    Exposures of the general population to manufactured nanoparticles (MNPs) are expected to keep rising due to increasing use of MNPs in common consumer products (PEN 2014). The present study focuses on characterizing ambient and indoor population exposures to silver MNPs (nAg). For situations where detailed, case-specific exposure-related data are not available, as in the present study, a novel tiered modeling system, Prioritization/Ranking of Toxic Exposures with GIS (geographic information system) Extension (PRoTEGE), has been developed: it employs a product life cycle analysis (LCA) approach coupled with basic human life stage analysis (LSA) to characterize potential exposures to chemicals of current and emerging concern. The PRoTEGE system has been implemented for ambient and indoor environments, utilizing available MNP production, usage, and properties databases, along with laboratory measurements of potential personal exposures from consumer spray products containing nAg. Modeling of environmental and microenvironmental levels of MNPs employs probabilistic material flow analysis combined with product LCA to account for releases during manufacturing, transport, usage, disposal, etc. Human exposure and dose characterization further employ screening microenvironmental modeling and intake fraction methods combined with LSA for potentially exposed populations, to assess differences associated with gender, age, and demographics. Population distributions of intakes, estimated using the PRoTEGE framework, are consistent with published individual-based intake estimates, demonstrating that PRoTEGE is capable of capturing realistic exposure scenarios for the US population. Distributions of intakes are also used to calculate biologically relevant population distributions of uptakes and target tissue doses through human airway dosimetry modeling that takes into account product MNP size distributions and age-relevant physiological parameters.

  11. In Vitro Exposure Systems and Dosimetry Assessment Tools for Inhaled Tobacco Products: Workshop Proceedings, Conclusions, and Paths Forward for In Vitro Model Use

    Science.gov (United States)

    In 2009, the passing of The Family Smoking Prevention and Tobacco Control Act facilitated the establishment of the FDA Center for Tobacco Products (CTP) and gave it regulatory authority over the marketing, manufacture and distribution of tobacco products, including those termed &...

  12. SYSTEMS MODELING OF PROSTATE REGULATION AND ...

    Science.gov (United States)

    The prostate is an androgen-dependent tissue that is an important site of disease in human males as well as an important indicator of androgen status in animals. The rat prostate is used for studying antiandrogenic drugs as well as for evaluation of endocrine disruption (e.g., Hershberger Assay). Pubertal changes in the prostate have been observed to be as sensitive to environmental antiandrogens as in utero effects. The goal of this research is to model the biology of prostate androgen function on a systems level to determine the factors responsible for the dose-response observable with androgens and antiandrogens in the male rat. This includes investigation of the roles of positive and negative feedback loops in prostatic response following castration and dosing with testosterone and/or antiandrogens. A biologically-based, systems-level model will be developed describing the regulation of the prostate by androgens. The model will extend an existing model for the male rat central axis, which describes feedback between luteinizing hormone and testosterone production in the testes, to include the prostate and conversion of testosterone to dihydrotestosterone (DHT). The prostate model will describe binding of androgens to the androgen receptor, 5α-reductase catalyzed production of DHT, and gene regulation affecting cell proliferation, apoptosis, and prostatic fluid production. The model will combine pharmacokinetic models for endogenous hormones (i.e., testost

  13. Model Reduction of Hybrid Systems

    DEFF Research Database (Denmark)

    Shaker, Hamid Reza

    for model reduction of switched systems is based on the switching generalized gramians. The reduced order switched system is guaranteed to be stable for all switching signal in this method. This framework uses stability conditions which are based on switching quadratic Lyapunov functions which are less...... conservative than the stability conditions based on common quadratic Lyapunov functions. The stability conditions which are used for this method are very useful in model reduction and design problems because they have slack variables in the conditions. Similar conditions for a class of switched nonlinear......High-Technological solutions of today are characterized by complex dynamical models. A lot of these models have inherent hybrid/switching structure. Hybrid/switched systems are powerful models for distributed embedded systems design where discrete controls are applied to continuous processes...

  14. Systemic representation of a production system: the Sagace method

    International Nuclear Information System (INIS)

    Benkhannouche, S.; Penalva, J.M.

    1993-01-01

    The systemic approach used in this study is devoted at a high level radioactive waste vitrification pilot. The Sagace method permits to realize a global view of this pilot plant taking in account the process, the production subsystems and the control process subsystems. 4 figs., 4 refs

  15. Entanglement production in quantized chaotic systems

    Indian Academy of Sciences (India)

    eigenangles of UT , is Wigner distributed which is typical of any quantized chaotic systems [7,8]. Therefore, it is quite reasonable to expect that the statistical bound on entanglement can be estimated by random matrix modeling. The two RDMs, corresponding to two subsystems, have the structures A†A and AA†, where A is.

  16. Distribution system modeling and analysis

    CERN Document Server

    Kersting, William H

    2001-01-01

    For decades, distribution engineers did not have the sophisticated tools developed for analyzing transmission systems-often they had only their instincts. Things have changed, and we now have computer programs that allow engineers to simulate, analyze, and optimize distribution systems. Powerful as these programs are, however, without a real understanding of the operating characteristics of a distribution system, engineers using the programs can easily make serious errors in their designs and operating procedures. Distribution System Modeling and Analysis helps prevent those errors. It gives readers a basic understanding of the modeling and operating characteristics of the major components of a distribution system. One by one, the author develops and analyzes each component as a stand-alone element, then puts them all together to analyze a distribution system comprising the various shunt and series devices for power-flow and short-circuit studies. He includes the derivation of all models and includes many num...

  17. DWPF waste glass Product Composition Control System

    Energy Technology Data Exchange (ETDEWEB)

    Brown, K.G.; Postles, R.L.

    1992-01-01

    The Defense Waste Processing Facility (DWPF) will be used to blend aqueous radwaste (PHA) with solid radwaste (Sludge) in a waste receipt vessel (the SRAT). The resulting SRAT material is transferred to the SME an there blended with ground glass (Frit) to produce a batch of melter feed slurry. The SME material is passed to a hold tank (the MFT) which is used to continuously feed the DWPF melter. The melter. The melter produces a molten glass wasteform which is poured into stainless steel canisters for cooling and, ultimately, shipment to and storage in a geologic repository. The Product Composition Control System (PCCS) is the system intended to ensure that the melt will be processible and that the glass wasteform will be acceptable. This document provides a description of this system.

  18. DWPF waste glass Product Composition Control System

    Energy Technology Data Exchange (ETDEWEB)

    Brown, K.G.; Postles, R.L.

    1992-07-01

    The Defense Waste Processing Facility (DWPF) will be used to blend aqueous radwaste (PHA) with solid radwaste (Sludge) in a waste receipt vessel (the SRAT). The resulting SRAT material is transferred to the SME an there blended with ground glass (Frit) to produce a batch of melter feed slurry. The SME material is passed to a hold tank (the MFT) which is used to continuously feed the DWPF melter. The melter. The melter produces a molten glass wasteform which is poured into stainless steel canisters for cooling and, ultimately, shipment to and storage in a geologic repository. The Product Composition Control System (PCCS) is the system intended to ensure that the melt will be processible and that the glass wasteform will be acceptable. This document provides a description of this system.

  19. TECHNICAL PRODUCT RISK ASSESSMENT: STANDARDS, INTEGRATION IN THE ERM MODEL AND UNCERTAINTY MODELING

    Directory of Open Access Journals (Sweden)

    Mirko Djapic

    2016-03-01

    Full Text Available European Union has accomplished, through introducing New Approach to technical harmonization and standardization, a breakthrough in the field of technical products safety and in assessing their conformity, in such a manner that it integrated products safety requirements into the process of products development. This is achieved by quantifying risk levels with the aim of determining the scope of the required safety measures and systems. The theory of probability is used as a tool for modeling uncertainties in the assessment of that risk. In the last forty years are developed new mathematical theories have proven to be better at modeling uncertainty when we have not enough data about uncertainty events which is usually the case in product development. Bayesian networks based on modeling of subjective probability and Evidence networks based on Dempster-Shafer theory of belief functions proved to be an excellent tool for modeling uncertainty when we do not have enough information about all events aspect.

  20. Evaluation of Nuclear Hydrogen Production System

    International Nuclear Information System (INIS)

    Park, Won Seok; Park, C. K.; Park, J. K. and others

    2006-04-01

    The major objective of this work is tow-fold: one is to develop a methodology to determine the best VHTR types for the nuclear hydrogen demonstration project and the other is to evaluate the various hydrogen production methods in terms of the technical feasibility and the effectiveness for the optimization of the nuclear hydrogen system. Both top-tier requirements and design requirements have been defined for the nuclear hydrogen system. For the determination of the VHTR type, a comparative study on the reference reactors, PBR and PBR, was conducted. Based on the analytic hierarchy process (AHP) method, a systematic methodology has been developed to compare the two VHTR types. Another scheme to determine the minimum reactor power was developed as well. Regarding the hydrogen production methods, comparison indices were defined and they were applied to the IS (Iodine-Sulfur) scheme, Westinghouse process, and the, high-temperature electrolysis method. For the HTE, IS, and MMI cycle, the thermal efficiency of hydrogen production were systematically evaluated. For the IS cycle, an overall process was identified and the functionality of some key components was identified. The economy of the nuclear hydrogen was evaluated, relative to various primary energy including natural gas coal, grid-electricity, and renewable. For the international collaborations, two joint research centers were established: NH-JRC between Korea and China and NH-JDC between Korea and US. Currently, several joint researches are underway through the research centers

  1. Hydronic distribution system computer model

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, J.W.; Strasser, J.J.

    1994-10-01

    A computer model of a hot-water boiler and its associated hydronic thermal distribution loop has been developed at Brookhaven National Laboratory (BNL). It is intended to be incorporated as a submodel in a comprehensive model of residential-scale thermal distribution systems developed at Lawrence Berkeley. This will give the combined model the capability of modeling forced-air and hydronic distribution systems in the same house using the same supporting software. This report describes the development of the BNL hydronics model, initial results and internal consistency checks, and its intended relationship to the LBL model. A method of interacting with the LBL model that does not require physical integration of the two codes is described. This will provide capability now, with reduced up-front cost, as long as the number of runs required is not large.

  2. Modelling and optimization of integrated system to energy production for sustainable development of fruits agrobusiness; Modelagem e otimizacao do sistema integrado da producao de energia para desenvolvimento sustentavel do agronegocio de frutas

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa, Daniely de Barros [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Engenharia Eletrica; Andrade, Rodrigo Freitas; Ourique, Jorge Eduardo da Silva [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Engenharia Quimica; Selvam, P.V. Pannir [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Engenharia Ambiental

    2004-07-01

    Great problems are found by who need to get a power plant capable to mostly make possible the deriving food production of the fruits. The use of the electric energy of the plants and micron-plant is one of the main factors for the rise in the cost of the production. The use of alternative sources of energy sells at a loss a little this cost. Of this form, this project of integrated system of production of energy for agroindustry, supported for the CNPq, becomes advantageous all the investments that come to be made in this direction. The objective of the research is to develop a new synthesis of processes for use of vegetal biomass (wood) for production of the applied electric energy in the process of manufacture of jelly of fruits with co-production of activated coal. Our project of residual biomass produces energy from the wood saw pyrolysis and gasification. And also uses the substitution of the glucose found in the sugar for the pectin, proceeding from the rinds of fruits. Comparative results indicate that this substantiates (pectin) is sufficiently efficient in the control of the cholesterol level of the blood and also is very rich in the energy supply for the people who consume them. After carried through bibliographical research on the current state of the technology of the production of energy based on the vegetal biomass of firewood, processes of term conversion, reactor of activation and equipment, to leave of this had been developed engineering projects, with the use of the tool Super ProDesigner 4.9. Some simulations of processes of fast pyrolysis, gasification, separation of bio oil, generation of energy including system of integration of energy production as innovation of the considered work had been made. To leave of this, two scenes had been developed: one, the current process of production and the other, our innovation, being studied at great length the project of investment and costs, analysis of viability and cash flux using software Orcamento

  3. Employment, Production and Consumption model: Patterns of phase transitions

    Science.gov (United States)

    Lavička, H.; Lin, L.; Novotný, J.

    2010-04-01

    We have simulated the model of Employment, Production and Consumption (EPC) using Monte Carlo. The EPC model is an agent based model that mimics very basic rules of industrial economy. From the perspective of physics, the nature of the interactions in the EPC model represents multi-agent interactions where the relations among agents follow the key laws for circulation of capital and money. Monte Carlo simulations of the stochastic model reveal phase transition in the model economy. The two phases are the phase with full unemployment and the phase with nearly full employment. The economy switches between these two states suddenly as a reaction to a slight variation in the exogenous parameter, thus the system exhibits strong non-linear behavior as a response to the change of the exogenous parameters.

  4. Innovation of food production systems : product quality and consumer acceptance

    OpenAIRE

    Jongen, W.M.F.; Meulenberg, M.T.G.

    1998-01-01

    he quality of food products, as perceived by consumers, is a main driving force behind today's innovations in the food industry. Product development represents large investments of companies both in money and human resources and has to be accomplished in a highly competitive market situation. Consequently, product innovation should be considered in this context. In order to be successful, all aspects of product development should be put into proportion in a balanced and structured way. Intern...

  5. Entanglement property in matrix product spin systems

    International Nuclear Information System (INIS)

    Zhu Jingmin

    2012-01-01

    We study the entanglement property in matrix product spin-ring systems systemically by von Neumann entropy. We find that: (i) the Hilbert space dimension of one spin determines the upper limit of the maximal value of the entanglement entropy of one spin, while for multiparticle entanglement entropy, the upper limit of the maximal value depends on the dimension of the representation matrices. Based on the theory, we can realize the maximum of the entanglement entropy of any spin block by choosing the appropriate control parameter values. (ii) When the entanglement entropy of one spin takes its maximal value, the entanglement entropy of an asymptotically large spin block, i.e. the renormalization group fixed point, is not likely to take its maximal value, and so only the entanglement entropy S n of a spin block that varies with size n can fully characterize the spin-ring entanglement feature. Finally, we give the entanglement dynamics, i.e. the Hamiltonian of the matrix product system. (author)

  6. Intrusion detection: systems and models

    Science.gov (United States)

    Sherif, J. S.; Dearmond, T. G.

    2002-01-01

    This paper puts forward a review of state of the art and state of the applicability of intrusion detection systems, and models. The paper also presents a classfication of literature pertaining to intrusion detection.

  7. Predictive Model of Energy Consumption in Beer Production

    Directory of Open Access Journals (Sweden)

    Tiecheng Pu

    2013-07-01

    Full Text Available The predictive model of energy consumption is presented based on subtractive clustering and Adaptive-Network-Based Fuzzy Inference System (for short ANFIS in the beer production. Using the subtractive clustering on the historical data of energy consumption, the limit of artificial experience is conquered while confirming the number of fuzzy rules. The parameters of the fuzzy inference system are acquired by the structure of adaptive network and hybrid on-line learning algorithm. The method can predict and guide the energy consumption of the factual production process. The reducing consumption scheme is provided based on the actual situation of the enterprise. Finally, using concrete examples verified the feasibility of this method comparing with the Radial Basis Functions (for short RBF neural network predictive model.

  8. Application of product modelling - seen from a work preparation viewpoint

    DEFF Research Database (Denmark)

    Hvam, Lars

    the specification work. The theoretical fundament of the project include four elements. The first element (work preparation) consider methods for analysing and preparing the direct work in the production, pointing to an analogy between analysing the direct work in the production and the work in the planning systems......, over building a model, and to the final programming of an application. It has been stressed out to carry out all the phases in the outline of procedure in the empirical work, one of the reasons being to prove that it is possible, with a reasonable consumption of resources, to build an application...

  9. A TWO-PRODUCT INVENTORY SYSTEM WITH PRODUCT INTERACTION

    Directory of Open Access Journals (Sweden)

    J. Yadavalli

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: In this paper, we study a two-component continuous review inventory system. We assume that demand occurs according to a Poisson process and that a demand can be satisfied only if both the components are available in the inventory. Back-orders are not permitted. We assume that the lead-time distribution of one product is arbitrary and the other is exponential. Identifying the underlying process as a semi-regeneration process we find the stationary distribution of the inventory level, the performance measures such as mean stationary rate of number of lost demands, the demands and the reorders made. A numerical example illustrates the results.

    AFRIKAANSE OPSOMMING: Die artikel ondersoek 'n tweekomponent- deurlopende oorsigvoorraadstelsel. Daar word aanvaar dat aanvraag 'n Poissonproses is en dat aanvraag slegs bevredig kan word indien beide die komponente in die voorraad beskikbaar is. Agterstallige bestellings word nie toegelaat nie. Daar word aanvaar dat die lewertydverdeling van die een produk arbitrêr en die ander eksponensieël is. Indien die onderliggende proses as 'n semigenerasieproses geïdentifiseer word, kan die stasionêre verspreiding van die voorraadvlak bepaal word. Maatstawwe van vertoning soos mediaan- stasionêre koers van die hoeveelheid verlore aanvraag, die aanvraag en herbestellings wat gedoen is word bepaal. 'n Numeriese voorbeeld illustreer die resultate.

  10. Climate Model Diagnostic Analyzer Web Service System

    Science.gov (United States)

    Lee, S.; Pan, L.; Zhai, C.; Tang, B.; Kubar, T. L.; Li, J.; Zhang, J.; Wang, W.

    2015-12-01

    Both the National Research Council Decadal Survey and the latest Intergovernmental Panel on Climate Change Assessment Report stressed the need for the comprehensive and innovative evaluation of climate models with the synergistic use of global satellite observations in order to improve our weather and climate simulation and prediction capabilities. The abundance of satellite observations for fundamental climate parameters and the availability of coordinated model outputs from CMIP5 for the same parameters offer a great opportunity to understand and diagnose model biases in climate models. In addition, the Obs4MIPs efforts have created several key global observational datasets that are readily usable for model evaluations. However, a model diagnostic evaluation process requires physics-based multi-variable comparisons that typically involve large-volume and heterogeneous datasets, making them both computationally- and data-intensive. In response, we have developed a novel methodology to diagnose model biases in contemporary climate models and implementing the methodology as a web-service based, cloud-enabled, provenance-supported climate-model evaluation system. The evaluation system is named Climate Model Diagnostic Analyzer (CMDA), which is the product of the research and technology development investments of several current and past NASA ROSES programs. The current technologies and infrastructure of CMDA are designed and selected to address several technical challenges that the Earth science modeling and model analysis community faces in evaluating and diagnosing climate models. In particular, we have three key technology components: (1) diagnostic analysis methodology; (2) web-service based, cloud-enabled technology; (3) provenance-supported technology. The diagnostic analysis methodology includes random forest feature importance ranking, conditional probability distribution function, conditional sampling, and time-lagged correlation map. We have implemented the

  11. Statistical modelling of fine red wine production

    Directory of Open Access Journals (Sweden)

    María Rosa Castro

    2010-01-01

    Full Text Available Producing wine is a very important economic activity in the province of San Juan in Argentina; it is therefore most important to predict production regarding the quantity of raw material needed. This work was aimed at obtaining a model relating kilograms of crushed grape to the litres of wine so produced. Such model will be used for predicting precise future values and confidence intervals for determined quantities of crushed grapes. Data from a vineyard in the province of San Juan was thus used in this work. The sampling coefficient of correlation was calculated and a dispersion diagram was then constructed; this indicated a li- neal relationship between the litres of wine obtained and the kilograms of crushed grape. Two lineal models were then adopted and variance analysis was carried out because the data came from normal populations having the same variance. The most appropriate model was obtained from this analysis; it was validated with experimental values, a good approach being obtained.

  12. Modeling Electric Discharges with Entropy Production Rate Principles

    Directory of Open Access Journals (Sweden)

    Thomas Christen

    2009-12-01

    Full Text Available Under which circumstances are variational principles based on entropy production rate useful tools for modeling steady states of electric (gas discharge systems far from equilibrium? It is first shown how various different approaches, as Steenbeck’s minimum voltage and Prigogine’s minimum entropy production rate principles are related to the maximum entropy production rate principle (MEPP. Secondly, three typical examples are discussed, which provide a certain insight in the structure of the models that are candidates for MEPP application. It is then thirdly argued that MEPP, although not being an exact physical law, may provide reasonable model parameter estimates, provided the constraints contain the relevant (nonlinear physical effects and the parameters to be determined are related to disregarded weak constraints that affect mainly global entropy production. Finally, it is additionally conjectured that a further reason for the success of MEPP in certain far from equilibrium systems might be based on a hidden linearity of the underlying kinetic equation(s.

  13. A solar pond driven distillation and power production system

    Science.gov (United States)

    Johnson, D. H.; Leboeuf, C. M.; Waddington, D.

    In this paper a solar pond driven distillation and power production system is described. The storage layer of the solar pond serves as the holding tank for the concentrated brine effluent from the distillation process as well as the collector and storage medium for solar energy used to heat incoming salty river water. Steam from the distillation process expands through a turbine/generator combination to provide power for the water circulation and vacuum pumps of the system. Water from the surface mixed layer of the pond is used to condense the steam. The closely integrated distillation and power production system converts an incoming stream of brackish or saline water into an outlet stream of the required purity. Salt and power are also products of the system. A thermodynamic analysis of the energy and mass balances of the system has been performed and a performance model of the system has been developed. This has been used to size the system for the application of desalting saline tributaries of the Colorado River.

  14. Mathematical modeling of aeroelastic systems

    Science.gov (United States)

    Velmisov, Petr A.; Ankilov, Andrey V.; Semenova, Elizaveta P.

    2017-12-01

    In the paper, the stability of elastic elements of a class of designs that are in interaction with a gas or liquid flow is investigated. The definition of the stability of an elastic body corresponds to the concept of stability of dynamical systems by Lyapunov. As examples the mathematical models of flowing channels (models of vibration devices) at a subsonic flow and the mathematical models of protective surface at a supersonic flow are considered. Models are described by the related systems of the partial differential equations. An analytic investigation of stability is carried out on the basis of the construction of Lyapunov-type functionals, a numerical investigation is carried out on the basis of the Galerkin method. The various models of the gas-liquid environment (compressed, incompressible) and the various models of a deformable body (elastic linear and elastic nonlinear) are considered.

  15. Metoder for Modellering, Simulering og Regulering af Større Termiske Processer anvendt i Sukkerproduktion. Methods for Modelling, Simulation and Control of Large Scale Thermal Systems Applied in Sugar Production

    DEFF Research Database (Denmark)

    Nielsen, Kirsten Mølgaard; Nielsen, Jens Frederik Dalsgaard

    The subject of this Ph.D. thesis is to investigate and develop methods for modelling, simulation and control applicable in large scale termal industrial plants. An ambition has been to evaluate the results in a physical process. Sugar production is well suited for the purpose. In collaboration...... with The Danish Sugar Corporation two subsystems in the production have been chosen for application - the evaporation process and the crystallization process. In order to obtain information about the static and dynamic behaviour of the subsystems, field measurements have been performed. A realtime evaporator...... of a computer, a data terminal and an electric interface corresponding to the interface at the sugar plant. The simulator is operating in realtime and thus a realistic test of controllers is possible. The idiomatic control methodology has been investigated developing a control concept for the evaporation...

  16. ABSTRACT MODELS FOR SYSTEM VIRTUALIZATION

    Directory of Open Access Journals (Sweden)

    M. G. Koveshnikov

    2015-05-01

    Full Text Available The paper is dedicated to issues of system objects securing (system files and user system or application configuration files against unauthorized access including denial of service attacks. We have suggested the method and developed abstract system virtualization models, which are used toresearch attack scenarios for different virtualization modes. Estimation for system tools virtualization technology effectiveness is given. Suggested technology is based on redirection of access requests to system objects shared among access subjects. Whole and partial system virtualization modes have been modeled. The difference between them is the following: in the whole virtualization mode all copies of access system objects are created whereon subjects’ requests are redirected including corresponding application objects;in the partial virtualization mode corresponding copies are created only for part of a system, for example, only system objects for applications. Alternative solutions effectiveness is valued relating to different attack scenarios. We consider proprietary and approved technical solution which implements system virtualization method for Microsoft Windows OS family. Administrative simplicity and capabilities of correspondingly designed system objects security tools are illustrated on this example. Practical significance of the suggested security method has been confirmed.

  17. Aerodynamic and Mechanical System Modelling

    DEFF Research Database (Denmark)

    Jørgensen, Martin Felix

    This thesis deals with mechanical multibody-systems applied to the drivetrain of a 500 kW wind turbine. Particular focus has been on gearbox modelling of wind turbines. The main part of the present project involved programming multibody systems to investigate the connection between forces, moments...

  18. Systems biology solutions for biochemical production challenges

    DEFF Research Database (Denmark)

    Hansen, Anne Sofie Lærke; Lennen, Rebecca M; Sonnenschein, Nikolaus

    2017-01-01

    characterization, genome-scale metabolic modeling, and adaptive laboratory evolution can be readily deployed in metabolic engineering projects. However, high performance strains usually carry tens of genetic modifications and need to operate in challenging environmental conditions. This additional complexity......There is an urgent need to significantly accelerate the development of microbial cell factories to produce fuels and chemicals from renewable feedstocks in order to facilitate the transition to a biobased society. Methods commonly used within the field of systems biology including omics...

  19. Yield-SAFE: A parameter-sparse process-based dynamic model for predicting resource capture, growth and production in agroforestry systems

    NARCIS (Netherlands)

    Werf, van der W.; Keesman, K.J.; Burgess, P.J.; Graves, A.R.; Pilbeam, D.; Incoll, L.D.; Metselaar, K.; Mayus, M.M.; Stappers, R.J.J.; Keulen, van H.; Palma, J.H.N.; Dupraz, C.

    2007-01-01

    1. Silvoarable agroforestry (SAF) is the cultivation of trees and arable crops on the same parcel of land. SAF may contribute to modern diversified land use objectives in Europe, such as enhanced biodiversity and productivity, reduced leaching of nitrogen, protection against flooding and erosion,

  20. Intelligent Systems Approaches to Product Sound Quality Analysis

    Science.gov (United States)

    Pietila, Glenn M.

    As a product market becomes more competitive, consumers become more discriminating in the way in which they differentiate between engineered products. The consumer often makes a purchasing decision based on the sound emitted from the product during operation by using the sound to judge quality or annoyance. Therefore, in recent years, many sound quality analysis tools have been developed to evaluate the consumer preference as it relates to a product sound and to quantify this preference based on objective measurements. This understanding can be used to direct a product design process in order to help differentiate the product from competitive products or to establish an impression on consumers regarding a product's quality or robustness. The sound quality process is typically a statistical tool that is used to model subjective preference, or merit score, based on objective measurements, or metrics. In this way, new product developments can be evaluated in an objective manner without the laborious process of gathering a sample population of consumers for subjective studies each time. The most common model used today is the Multiple Linear Regression (MLR), although recently non-linear Artificial Neural Network (ANN) approaches are gaining popularity. This dissertation will review publicly available published literature and present additional intelligent systems approaches that can be used to improve on the current sound quality process. The focus of this work is to address shortcomings in the current paired comparison approach to sound quality analysis. This research will propose a framework for an adaptive jury analysis approach as an alternative to the current Bradley-Terry model. The adaptive jury framework uses statistical hypothesis testing to focus on sound pairings that are most interesting and is expected to address some of the restrictions required by the Bradley-Terry model. It will also provide a more amicable framework for an intelligent systems approach