Design and synthesis of N-(4-aminopyridin-2-yl)amides as B-Raf(V600E) inhibitors.

Science.gov (United States)

Li, Xiaokai; Shen, Jiayi; Tan, Li; Zhang, Zhang; Gao, Donglin; Luo, Jinfeng; Cheng, Huimin; Zhou, Xiaoping; Ma, Jie; Ding, Ke; Lu, Xiaoyun

2016-06-15

B-Raf(V600E) was an effective target for the treatment of human cancers. Based on a pan-Raf inhibitor TAK-632, a series of N-(4-aminopyridin-2-yl)amide derivatives were designed as novel B-Raf(V600E) inhibitors. Detailed structure-activity studies of the compounds revealed that most of the compounds displayed potent enzymatic activity against B-Raf(V600E), and good selectivity over B-Raf(WT). One of the most promising compound 4l exhibited potent inhibitory activity with an IC50 value of 38nM for B-raf(V600E), and displayed antiproliferative activities against colo205 and HT29 cells with IC50 values of 0.136 and 0.094μM, respectively. It also displayed good selectivity on both enzymatic and cellular assays over B-Raf(WT). These inhibitors may serve as lead compounds for further developing novel B-Raf(V600E) inhibitors as anticancer drugs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Coherent pion production induced by 300 MeV and 600 MeV deuterons

International Nuclear Information System (INIS)

Aslanides, E.; Bergdolt, A.M.; Bing, O.; Fassnacht, P.; Hibou, F.

1982-01-01

Experimental data on (d,π - ) reactions at 300 and 600 MeV incident energy are presented. Inclusive spectra on 6 Li, 9 Be and 10 B targets near the kinematical limit do not show the usual scaling behaviour. For the two-body reaction 6 Li (d,π - ) 8 B the lowest-energy discrete states of the final nucleus were clearly resolved and the cross sections for pion production leading to those states have been determined. (orig.)

34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

Science.gov (United States)

2010-07-01

... assessments 300.320(a)(6)(i). • State level activities in support of 300.704(b)(4)(x). ACT (Definition) 300.4... definition of “Secondary school” 300.36. • State-level activities regarding charter schools 300.704(b)(4)(ix... determination • Lack of instruction in reading or math (see § 300.306(b)(1)(i), (b)(1)(ii)) • Limited English...

10 CFR Appendix B to Part 600 - Audit Report Distributees

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Audit Report Distributees B Appendix B to Part 600 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES Pt. 600, App. B Appendix B to Part 600—Audit Report Distributees Distributee: Manager, Eastern Region, Office of Inspector...

76 FR 4260 - Airworthiness Directives; Airbus Model A300 and A310 Series Airplanes, and Model A300 B4-600, B4...

Science.gov (United States)

2011-01-25

... after receipt. FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, International Branch... ensure the continued damage tolerance of the affected structure. The FAA has provided guidance for this... after April 3, 2007. Corrective Actions (j) Damaged, cracked, or corroded structure detected during any...

77 FR 24137 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-04-23

... Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule... Register. That AD applies to all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, Model... Airbus Model A300 B4-600, B4- 600R, and F4-600R series airplanes, Model A300 C4-605R Variant F airplanes...

75 FR 7942 - Airworthiness Directives; Airbus Model A310-203, -221, -222 Airplanes; and Model A300 F4-605R and...

Science.gov (United States)

2010-02-23

... Airworthiness Directives; Airbus Model A310-203, -221, -222 Airplanes; and Model A300 F4-605R and -622R...-222 airplanes, all serial numbers. (2) Airbus Model A300 F4-605R and A300 F4-622R airplanes, all...

78 FR 70207 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2013-11-25

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... Airbus Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4- 600R series airplanes; and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This AD was...

78 FR 9787 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2013-02-12

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300- 600 series airplanes); and Airbus [[Page 9788

Discovery of EBI-907: A highly potent and orally active B-Raf(V600E) inhibitor for the treatment of melanoma and associated cancers.

Science.gov (United States)

Lu, Biao; Cao, Hu; Cao, Jingsong; Huang, Song; Hu, Qiyue; Liu, Dong; Shen, Ru; Shen, Xiaodong; Tao, Weikang; Wan, Hong; Wang, Dan; Yan, Yinfa; Yang, Liuqing; Zhang, Jiayin; Zhang, Lei; Zhang, Lianshan; Zhang, Minsheng

2016-02-01

A novel series of pyrazolo[3,4-c]isoquinoline derivatives was discovered as B-Raf(V600E) inhibitors through scaffold hopping based on a literature lead PLX4720. Further SAR exploration and optimization led to the discovery of potent B-Raf(V600E) inhibitors with good oral bioavailability in rats and dogs. One of the compounds EBI-907 (13g) demonstrated excellent in vivo efficacy in B-Raf(V600E) dependent Colo-205 tumor xenograft models in mouse and is under preclinical studies for the treatment of melanoma and B-Raf(V600E) associated cancers. Copyright © 2015 Elsevier Ltd. All rights reserved.

JNC results of BN-600 benchmark calculation (phase 4)

International Nuclear Information System (INIS)

Ishikawa, Makoto

2003-01-01

The present work is the results of JNC, Japan, for the Phase 4 of the BN-600 core benchmark problem (Hex-Z fully MOX fuelled core model) organized by IAEA. The benchmark specification is based on 1) the RCM report of IAEA CRP on 'Updated Codes and Methods to Reduce the Calculational Uncertainties of LMFR Reactivity Effects, Action 3.12' (Calculations for BN-600 fully fuelled MOX core for subsequent transient analyses). JENDL-3.2 nuclear data library was used for calculating 70 group ABBN-type group constants. Cell models for fuel assembly and control rod calculations were applied: homogeneous and heterogeneous (cylindrical supercell) model. Basic diffusion calculation was three-dimensional Hex-Z model, 18 group (Citation code). Transport calculations were 18 group, three-dimensional (NSHEC code) based on Sn-transport nodal method developed at JNC. The generated thermal power per fission was based on Sher's data corrected on the basis of ENDF/B-IV data library. Calculation results are presented in Tables for intercomparison

78 FR 28159 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2013-05-14

...-0418; Directorate Identifier 2012-NM-200-AD] RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes...: We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes...

75 FR 74610 - Airworthiness Directives; Airbus Model A300 B2-1C, B2K-3C, B2-203, B4-2C, B4-103, and B4-203...

Science.gov (United States)

2010-12-01

... require repetitive inspections and, as terminating action, the embodiment of Airbus Service Bulletins (SB... terminating action, the embodiment of Airbus Service Bulletins (SB) A300-57-0235 and A300-57-6088...

78 FR 70003 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2013-11-22

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: We propose to adopt a new airworthiness directive (AD) for all Airbus Model A300 series airplanes; Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model...

Relaxation response of A533B steel from 25 to 600/degree/C

International Nuclear Information System (INIS)

Swindeman, R.W.; Bolling, E.

1989-01-01

Relaxation tests were performed on A533B steel over the range 25 to 600/degree/C in order to examine the general features of time- dependent deformation. It was found that the relaxation strength increased with the flow stress at low temperatures and was relatively independent of history at high temperatures. In the temperature range 400 to 600/degree/C the inelastic strain rates calculated from the relaxation rates followed stress dependencies that were consistent with expectations based on a model proposed by Hart and coworkers for matrix deformation. 21 refs., 10 figs

78 FR 9581 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2013-02-11

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F...-03-11 Airbus: Amendment 39-17346. Docket No. FAA-2012-1002; Directorate Identifier 2012-NM-052-AD. (a...

78 FR 15874 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2013-03-13

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F... ground threat avoidance, an Airbus A310 aeroplane experienced an uncommanded slide back of the co-pilot...

77 FR 40485 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-07-10

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... (AD) for all Airbus Model A300 series airplanes; all Model A300 B4-600, B4-600R, and F4-600R series... new AD: 2012-13-06 Airbus: Amendment 39-17108. Docket No. FAA-2012-0040; Directorate Identifier 2011...

76 FR 36387 - Airworthiness Directives; Airbus Model A300 Series Airplanes; Model A310 Series Airplanes; and...

Science.gov (United States)

2011-06-22

... pieces unit with 3 welds (old design) as pictured in Appendix 1 of this [EASA] AD. The welding process of... pre-modification 02447.. Blue and Green. A300 airplanes post-modification 02447. Blue. A300-600 airplanes Blue. A310 airplanes Green. Table 2--Applicable service information Airbus mandatory service...

77 FR 64701 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-10-23

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... Airbus Model A300 series airplanes; Model A310 series airplanes; and Model A300 B4-600, B4-600R, and F4... that the AD be effective after Airbus completes certifying the improved design for the fuel pump half...

75 FR 37994 - Airworthiness Directives; Bombardier, Inc. Model CL-600-1A11 (CL-600), CL-600-2A12 (CL-601), CL...

Science.gov (United States)

2010-07-01

... provides data for replacement of the accumulators. The commenter requests that stronger language be... numbers 1004 through 1085 inclusive; (2) Bombardier, Inc. CL-600-2A12 (CL-601) airplanes, serial numbers 3001 through 3066 inclusive; and (3) Bombardier, Inc. CL-600-2B16 (CL-601-3A, CL-601-3R, and CL- 604...

KAERI results for BN600 full MOX benchmark (Phase 4)

International Nuclear Information System (INIS)

Lee, Kibog Lee

2003-01-01

The purpose of this document is to report the results of KAERI's calculation for the Phase-4 of BN-600 full MOX fueled core benchmark analyses according to the RCM report of IAEA CRP Action on U pdated Codes and Methods to Reduce the Calculational Uncertainties of the LMFR Reactivity Effects. T he BN-600 full MOX core model is based on the specification in the document, F ull MOX Model (Phase4. doc ) . This document addresses the calculational methods employed in the benchmark analyses and benchmark results carried out by KAERI

34 CFR 300.601 - State performance plans and data collection.

Science.gov (United States)

2010-07-01

... Monitoring, Technical Assistance, and Enforcement § 300.601 State performance plans and data collection. (a... 34 Education 2 2010-07-01 2010-07-01 false State performance plans and data collection. 300.601... described in § 300.600(d). (b) Data collection. (1) Each State must collect valid and reliable information...

34 CFR 300.4 - Act.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Act. 300.4 Section 300.4 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES... Definitions Used in This Part § 300.4 Act. Act means the Individuals with Disabilities Education Act, as...

Strength of metallic glasses at 4.2-300 K

International Nuclear Information System (INIS)

Tabachnikova, E.D.

1987-01-01

Investigation into temperature dependence of metallic glass strength (Ni 78 Si 8 B 14 ; Fe 40 Ni 38 Mo 4 B 18 ; Fe 25 Ni 55 Si 10 B 1 0 ; Fe 61 Co 20 Si 4 B 15 ) is conducted within 300-4.2 K temperature interval. By the character of σ (T) x dependence and fracture mode the alloys investigated are subdivided into two groups. In 1 group alloys the fracture up to 4.2 K has the character typical of ductile fracture. In the second group alloys fracture acquires brittle character with the temperature decrease

Small molecules against B-RAF (BRAF Val600Glu (V600E single mutation

Directory of Open Access Journals (Sweden)

Zaharie F

2015-07-01

Full Text Available Florin Zaharie,1,* Roxana Cojocneanu-Petric,1,* Mihai Muresan,1 Ioana Frinc,2 Delia Dima,2 Bobe Petrushev,3 Alina Tanase,4 Cristian Berce,1 Mariana Chitic,2 Ioana Berindan-Neagoe,1 Valentina Pileczki,1 Alexandru Irimie,5 Ciprian Tomuleasa2 1Iuliu Hatieganu University of Medicine and Pharmacy, 2Department of Hematology, Ion Chiricuta Oncology Institute, 3Department of Pathology, Emergency University Hospital, Cluj Napoca, 4Department of Stem Cell Transplantation, Fundeni Clinical Institute, Bucharest, 5Department of Surgery, Ion Chiricuta Oncology Institute, Cluj Napoca, Romania *These authors contributed equally to this communicationWe have read with great interest the paper by Tang and Chen1 published in the most recent issue of the International Journal of Nanomedicine, in which the authors describe the protocol by which scientists constructed the ideal BRAF (V600E-modeled structure through homology modeling and introduced the method of structure-based docking or virtual screening from a large compound database. They concluded that BRAF (V600E has a quite prominent structural or conformational variation when compared to the wild-type BRAF protein by matrix of root mean square fluctuation and principal component analysis. On the basis of structure-based virtual screening, ligand-based quantitative structure activity relationship models, and molecular dynamics simulation, we recommend aknadicine and 16beta-hydroxy-19s-vindolinine N-oxide as potent compounds for developing novel inhibitors in the future. Read the original article 

77 FR 16430 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-03-21

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model C4-605R Variant F airplanes.../N A5231007000600. This [EASA] AD has been corrected to make clear that the use of Airbus SB A310...

300,000 IU or 600,000 IU of oral vitamin D3 for treatment of nutritional rickets: a randomized controlled trial.

Science.gov (United States)

Mittal, Hema; Rai, Sunita; Shah, Dheeraj; Madhu, S V; Mehrotra, Gopesh; Malhotra, Rajeev Kumar; Gupta, Piyush

2014-04-01

To evaluate the non-inferiority of a lower therapeutic dose (300,000 IU) in comparison to standard dose (600,000) IU of Vitamin D for increasing serum 25(OH) D levels and achieving radiological recovery in nutritional rickets. Randomized, open-labeled, controlled trial. Tertiary care hospital. 76 children (median age 12 mo) with clinical and radiologically confirmed rickets. Oral vitamin D3 as 300,000 IU (Group 1; n=38) or 600,000 IU (Group 2; n=38) in a single day. Primary: Serum 25(OH)D, 12 weeks after administration of vitamin D3; Secondary: Radiological healing and serum parathormone at 12 weeks; and clinical and biochemical adverse effects. Serum 25(OH)D levels [geometric mean (95% CI)] increased significantly from baseline to 12 weeks after therapy in both the groups [Group 1: 7.58 (5.50–10.44) to 16.06 (12.71– 20.29) ng/mL, Prickets in under-five children although there is an unacceptably high risk of hypercalcemia in both groups. None of the regime is effective in normalization of vitamin D status in majority of patients, 3 months after administering the therapeutic dose.

21 CFR 522.1660b - Oxytetracycline solution, 300 milligrams/milliliter.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Oxytetracycline solution, 300 milligrams... FORM NEW ANIMAL DRUGS § 522.1660b Oxytetracycline solution, 300 milligrams/milliliter. (a) Specifications. Each milliliter (mL) of solution contains 300 milligrams (mg) oxytetracycline base. (b) Sponsor...

21 CFR 558.600 - Tiamulin.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Tiamulin. 558.600 Section 558.600 Food and Drugs... Animal Feeds § 558.600 Tiamulin. (a) Specifications. Type A article containing 5, 10, or 113.4 grams of tiamulin (as tiamulin hydrogen fumarate) per pound. (b) Approvals. See No. 058198 in § 510.600(c) of this...

76 FR 41653 - Airworthiness Directives; Bombardier, Inc. Model CL-600-2A12 (CL-601) and CL-600-2B16 (CL-601-3A...

Science.gov (United States)

2011-07-15

... p.m., Monday through Friday, except Federal holidays. The AD docket contains the NPRM, the.... Model CL-600-2A12 (CL-601) airplanes, serial numbers 3001 through 3066 inclusive on which Bombardier... Variants) airplanes, serial numbers 5001 through 5194 inclusive on which Bombardier Service Bulletin 601...

Design and discovery of thioether and nicotinamide containing sorafenib analogues as multikinase inhibitors targeting B-Raf, B-RafV600E and VEGFR-2.

Science.gov (United States)

Sun, Shaofeng; He, Zuopeng; Huang, Mindong; Wang, Ningning; He, Zongzhong; Kong, Xiangkai; Yao, Jianwen

2018-04-03

New sorafenib derivatives containing thioether and nicotinamide moiety were designed and synthesized as B-Raf, B-Raf V600E and VEGFR-2 multikinase inhibitors. Their in vitro enzymatic inhibitory activities against B-Raf, B-Raf V600E and VEGFR-2 and their antiproliferative activities against HCT-116 and B16BL6 cell lines were evaluated and described. Most of the compounds showed potent activities against both cell lines and specific kinases. Compounds a1, b1 and c4, which exhibited the most potent inhibitory activities against B-Raf with IC 50 of 21 nM, 27 nM and 17 nM, B-Raf V600E with IC 50 of 29 nM, 28 nM and 16 nM, VEGFR-2 with IC 50 of 84 nM, 46 nM and 63 nM, respectively, and good antiproliferative activities, also demonstrated competitive antiangiogenic activities to sorafenib in in vitro HUVEC tube formation assay. Copyright © 2018 Elsevier Ltd. All rights reserved.

34 CFR 600.4 - Institution of higher education.

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Institution of higher education. 600.4 Section 600.4 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION INSTITUTIONAL ELIGIBILITY UNDER THE HIGHER EDUCATION ACT OF 1965, AS...

Oxide Morphology of a FeCrAl Alloy, Kanthal APMT, following Extended Aging at 300-600C

Energy Technology Data Exchange (ETDEWEB)

Li, Nan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Parker, Stephen Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Wood, Elizabeth Sooby [Univ. of Texas, San Antonio, TX (United States)

2017-09-19

Iron-chromium-aluminum (FeCrAl) alloys are of interest to the nuclear materials community due to their resistance to high temperature steam oxidation under accident conditions. The present work investigates oxide formation at temperatures relevant to light water reactor cladding operation following extended aging to assess growth kinetics, chemical composition, and microstructure of oxide formation on a commercial FeCrAl alloy, Fe-21wt.%Cr-5wt.%Al-3wt.%Mo (Kanthal APMT). Aging treatments were performed for 100-1000 hours in stagnant air at 300, 400, 500, and 600 °C, respectively. Oxide growth behavior under the investigated conditions follows a logarithmic time dependence. When the oxidization temperature is 400 °C or below, the oxide is amorphous. At 500 °C, isolated crystalline regions start to appear during short period aging time and expand with extended exposures. Crystalline α-Al2O3 oxide film develops at 600 °C and the correlated logarithmic rate constant decreases significantly, indicating enhanced oxidation resistance of the formed oxide film. In addition, Mo segregation at grain boundaries has been observed when the aging temperature exceeds 500 °C. The results of this study can be viewed as an upper bounding result for potential oxide coarsening during reactor operation.

Identification of novel B-RafV600E inhibitors employing FBDD strategy.

Science.gov (United States)

Wang, Peng-Fei; Qiu, Han-Yue; Wang, Ze-Feng; Zhang, Yong-Jiao; Wang, Zhong-Chang; Li, Dong-Dong; Zhu, Hai-Liang

2017-05-15

B-Raf kinase is the key point in a main branch of mitogen-activated protein kinase pathways and some of its mutations, such as the V600E mutation, lead to the persistent activation of ERK signaling and the trigger of severe diseases, including melanoma and other somatic cancers. Several potent drugs have been approved to treat B-Raf-related tumors, however, cases of resistance and relapse have been reported universally. Hence, differential scaffolds are in need to alleviate the scarcity of drugs and benefit the therapy of B-Raf-mutant cancers. Herein we report our recent work on the construction of novel B-Raf V600E inhibitors employing fragment-based drug design strategy. In this research, we decomposed known inhibitors to fragments and rebuilt new candidates using these blocks according to the evaluation of their potential. Lead compounds were synthesized after selection by means of virtual screening and molecular dynamics validation. Afterwards, we tested the pharmacological efficiency of these entities both in vitro and in vivo utilizing A375 xenograft model. The results favored our rational design intention and hinted this new kind of inhibitors might be helpful in the further explorations of potent agents. Copyright © 2017 Elsevier Inc. All rights reserved.

The 600 °C and 450 °C isothermal sections of the Zn–Fe–B system

Energy Technology Data Exchange (ETDEWEB)

Yin, Fucheng, E-mail: fuchengyin@xtu.edu.cn; Ruan, Xinglong; Zhao, Manxiu; Liu, Yongxiong; Li, Zhi

2013-07-15

Highlights: •The 600°C and 450°C isothermal sections of the Zn-Fe-B system are determined. •The solubility of Zn in Fe{sub 2}B and FeB at 600°C is 1.8 at.% and 2.5 at.%, respectively. •The solubility of Zn in Fe{sub 2}B and FeB at 450°C is 1.7 at.% and 2.1 at.%, respectively. •All Fe-Zn compounds can be in equilibrium with Fe{sub 2}B at 450°C. •Both FeB and Fe{sub 2}B are in equilibrium with the liquid phase at 600°C. -- Abstract: The isothermal sections of Zn–Fe–B ternary system at 600 °C and 450 °C have been determined experimentally using scanning electron microscopy, electron probe microanalysis and X-ray diffraction. Five three-phase regions exist in the isothermal section at 600 °C, seven three-phase regions exist at 450 °C. The experimental results indicate that B is almost insoluble in Fe–Zn compounds and α-Fe. The solubility of Zn in Fe{sub 2}B and FeB at 600 °C is 1.8 at.% and 2.5 at.%, respectively, and that at 450 °C is 1.7 at.% and 2.1 at.%, respectively. All Fe–Zn compounds can be in equilibrium with Fe{sub 2}B, the equilibrium between FeB and ζ prohibits the coexistence of Fe{sub 2}B and liquid at 450 °C. Both FeB and Fe{sub 2}B are in equilibrium with the liquid phase at 600 °C.

76 FR 71241 - Airworthiness Directives; Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440...

Science.gov (United States)

2011-11-17

... of the hydraulic system No. 1 with a new reducer in accordance with Part B of Bombardier Service... reducer of the hydraulic system No. 1 with a new reducer, paragraph (q) of this AD does. Other FAA AD... of on-ground hydraulic accumulator screw cap/end cap failure have been experienced on CL-600-2B19...

Sputtering characteristics of B4C-overlaid graphite for keV energy deuterium ion irradiation

International Nuclear Information System (INIS)

Gotoh, Y.; Yamaki, T.; Ando, T.; Jimbou, R.; Ogiwara, N.; Saidoh, M.; Teruyama, K.

1992-01-01

Two types of B 4 C-overlaid graphite (CFC), conversion and CVD B 4 C, together with bare CFC (PCC-2S) and/or HP B 4 C, were investigated with respect to erosion yields for 1 keV D + , D 2 /CD 4 TDS after 1 keV D + implantation, and thermal diffusivity/conductivity, in a temperature range from 300 to 1400 K. The erosion yields of both conversion and CVD B 4 C were found to be much lower than that of the bare CFC (PCC-2S), in both chemical sputtering (600-1100 K) and RES (1200-1400 K) temperature regions. The D 2 TDS peak of the conversion B 4 C was found to be located at nearly 200 K lower temperature than that of the bare CFC (PCC-2S), indicating much lower activation energy for detrapping/recombination of trapped D in the conversion B 4 C and in the CFC. The CD 4 TDS peak of the conversion B 4 C was found to be much weaker in intensity than that of the bare CFC (PCC-2S), in agreement with the present erosion yield results. Thermal diffusivities and conductivities of both the conversion B 4 C/PCC-2S and the CVD B 4 C, were measured to be nearly 1/10 of that of the bare CFC (PCC-2S), and to decrease with increasing temperatures. (orig.)

A 500-600 MHz GaN power amplifier with RC-LC stability network

Science.gov (United States)

Ma, Xinyu; Duan, Baoxing; Yang, Yintang

2017-08-01

A 500-600 MHz high-efficiency, high-power GaN power amplifier is designed and realized on the basis of the push-pull structure. The RC-LC stability network is proposed and applied to the power amplifier circuit for the first time. The RC-LC stability network can significantly reduce the high gain out the band, which eliminates the instability of the power amplifier circuit. The developed power amplifier exhibits 58.5 dBm (700 W) output power with a 17 dB gain and 85% PAE at 500-600 MHz, 300 μs, 20% duty cycle. It has the highest PAE in P-band among the products at home and abroad. Project supported by the National Key Basic Research Program of China (No. 2014CB339901).

78 FR 40069 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2013-07-03

...-0539; Directorate Identifier 2012-NM-145-AD] RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes... B4-600 and Model A300 B4-600R series airplanes. That AD currently requires repetitive inspections to... information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on...

IGA/SCC propagation rate measurements on alloy 600 steam generator tubing using a side stream model boiler

International Nuclear Information System (INIS)

Takamatsu, H.; Matsueda, K.; Matsunaga, T.; Kitera, T.; Arioka, K.; Tsuruta, T.; Okamoto, S.

1993-01-01

IGA/SCC crack propagation rate measurements using various types of IGA/SCC predefected ALloy 600 tubing were tested in model boilers, a side stream model boiler at Ohi Unit 1 and similar model boilers in the laboratory. Types of IGA/SCC predefects introduced from the outside of the tubing were as follows. (1) Actual IGA/SCC predefect introduced by high temperature caustic environments; (2) Longitudinal predefect by electrodischarge machining (EDM) method, and then crack tip fatigue was introduced to serve as the marker on the fractured surface (EDM slit + fatigue). IGA/SCC crack propagation rate was measured after the destructive examination by Cr concentration profile on fracture surface for (1), and observation of intergranular fractured surface propagated from the marked fatigue was employed for (2) and (3) after the model boiler tests. As for the water chemistry conditions, mainly AVT (high N 2 H 4 ) + boric acid (5-10ppm as B in SGs) treatment for both model boilers, and some of the tests for the model boiler in the laboratory employed AVT (high N 2 H 4 ) without boric acid. The results of IGA/SCC crack propagation rate measurements were compared with each other, and the three methods employed showed a good coincidence with the rate of ca. 1 x 10 -5 mm/Hr for AVT (high N 2 H 4 ) + boric acid treatment condition, in the case that crack tip boron intensity (B/O value by IMMA analysis) of more than 1 was observed

NR4A nuclear receptors mediate carnitine palmitoyltransferase 1A gene expression by the rexinoid HX600

Energy Technology Data Exchange (ETDEWEB)

Ishizawa, Michiyasu [Division of Biochemistry, Department of Biomedical Sciences, Nihon University School of Medicine, 30-1 Oyaguchi-kamicho, Itabashi-ku, Tokyo 173-8610 (Japan); Kagechika, Hiroyuki [Graduate School of Biomedical Science, Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University, 2-3-10 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-0062 (Japan); Makishima, Makoto, E-mail: makishima.makoto@nihon-u.ac.jp [Division of Biochemistry, Department of Biomedical Sciences, Nihon University School of Medicine, 30-1 Oyaguchi-kamicho, Itabashi-ku, Tokyo 173-8610 (Japan)

2012-02-24

Highlights: Black-Right-Pointing-Pointer The function of RXR heterodimers with NR4 receptors remains unknown. Black-Right-Pointing-Pointer The RXR ligand HX600 induces expression of carnitine palmitoyltransferase 1A (CPT1A). Black-Right-Pointing-Pointer HX600-induced CPT1A expression is mediated by the NR4 receptors, Nur77 and NURR1. Black-Right-Pointing-Pointer CPT1A induction by HX600 is not mediated by de novo protein synthesis. Black-Right-Pointing-Pointer CPT1A could be a target of the Nur77-RXR and NURR1-RXR heterodimers. -- Abstract: Retinoid X receptors (RXRs) are members of the nuclear receptor superfamily and can be activated by 9-cis retinoic acid (9CRA). RXRs form homodimers and heterodimers with other nuclear receptors such as the retinoic acid receptor and NR4 subfamily nuclear receptors, Nur77 and NURR1. Potential physiological roles of the Nur77-RXR and NURR1-RXR heterodimers have not been elucidated. In this study, we identified a gene regulated by these heterodimers utilizing HX600, a selective RXR agonist for Nur77-RXR and NURR1-RXR. While 9CRA induced many genes, including RAR-target genes, HX600 effectively induced only carnitine palmitoyltransferase 1A (CPT1A) in human teratocarcinoma NT2/D1 cells, which express RXR{alpha}, Nur77 and NURR1. HX600 also increased CPT1A expression in human embryonic kidney (HEK) 293 cells and hepatocyte-derived HepG2 cells. Although HX600 induced CPT1A less effectively than 9CRA, overexpression of Nur77 or NURR1 increased the HX600 response to levels similar to 9CRA in NT2/D1 and HEK293 cells. A dominant-negative form of Nur77 or NURR1 repressed the induction of CPT1A by HX600. A protein synthesis inhibitor did not alter HX600-dependent CPT1A induction. Thus, the rexinoid HX600 directly induces expression of CPT1A through a Nur77 or NURR1-mediated mechanism. CPT1A, a gene involved in fatty acid {beta}-oxidation, could be a target of RXR-NR4 receptor heterodimers.

76 FR 68671 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2011-11-07

...-1170; Directorate Identifier 2010-NM-264-AD] RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes...: We propose to adopt a new airworthiness directive (AD) for all Airbus Model A300 B4-600, B4-600R, and... Friday, except Federal holidays. For Airbus service information identified in this proposed AD, contact...

77 FR 73343 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-12-10

...-1224; Directorate Identifier 2012-NM-112-AD] RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes...: We propose to adopt a new airworthiness directive (AD) for all Airbus Model A300 B4-600, B4-600R, and... holidays. For Airbus service information identified in this proposed AD, contact Airbus SAS-EAW...

Production of a thermostable 1,3-1,4-β-glucanase mutant in Bacillus subtilis WB600 at a high fermentation capacity and its potential application in the brewing industry.

Science.gov (United States)

Niu, Chengtuo; Liu, Chunfeng; Li, Yongxian; Zheng, Feiyun; Wang, Jinjing; Li, Qi

2018-02-01

1,3-1,4-β-glucanase was an important biotechnological aid in the brewing industry. In a previous research, a Bacillus BglTO mutant (BglTO) with high tolerance towards high temperature and low-pH conditions was constructed and expressed in Escherichia coli. However, E. coli was not a suitable host for enzyme production in food industry. Therefore, the present work aimed to achieve the high-level expression of BglTO in Bacillus subtilis WB600 and to test its effect in Congress mashing. The β-glucanase mutant was successfully expressed in B. subtilis WB600 and favorable plasmid segregation and structural stability were observed. The maximal extracellular activity of β-glucanase in recombinant B. subtilis WB600 reached 4840.4UmL -1 after cultivation condition optimization, which was 1.94-fold higher than that before optimization. The fermentation capacity of recombinant B. subtilis reached 242.02UmL -1 h -1 , which was the highest among all reported β-glucanases. The addition of BglTO in Congress mashing significantly reduced the filtration time and viscosity of mash by 29.7% and 12.3%, respectively, which was superior to two commercial enzymes. These favorable properties indicated that B. subtilis WB600 was a suitable host for production of BglTO, which was promising for application in the brewing industry. Copyright © 2017 Elsevier B.V. All rights reserved.

77 FR 59149 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-09-26

...-1002; Directorate Identifier 2012-NM-052-AD] RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes...: We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A300 B4-600, B4-600R...: Airbus: Docket No. FAA-2012-1002; Directorate Identifier 2012-NM- 052-AD. (a) Comments Due Date We must...

10 CFR 300.4 - Selecting organizational boundaries.

Science.gov (United States)

2010-01-01

... determining their organizational boundaries, with financial control meaning the ability to direct the... control. (2) Entities may establish organizational boundaries using approaches other than financial... 10 Energy 3 2010-01-01 2010-01-01 false Selecting organizational boundaries. 300.4 Section 300.4...

50 CFR 600.325 - National Standard 4-Allocations.

Science.gov (United States)

2010-10-01

... promote conservation (in the sense of wise use) by optimizing the yield in terms of size, value, market... Section 600.325 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND....325 National Standard 4—Allocations. (a) Standard 4. Conservation and management measures shall not...

Effect of nanostructure on thermoelectric properties of La0.7Sr0.3MnO3 in 300–600 K temperature range

Science.gov (United States)

Singh, Saurabh; Srivastav, Simant Kumar; Patel, Ashutosh; Chatterjee, Ratnamala; Pandey, Sudhir K.

2018-05-01

In oxide materials, nanostructuring effect has been found a very promising approach for the enhancement of figure-of-merit, ZT. In the present work, we have synthesized La0.7Sr0.3MnO3 (LSMO) compound using sol-gel method and samples of crystallite size of ∼20, ∼41, and ∼49 nm were obtained by giving different heat treatment. Seebeck coefficient (α), electrical resistivity (ρ), and thermal conductivity (κ) measurements were carried out in 300–600 K temperature range. The systematic change in the values of α from ∼‑19 μV/K to ∼‑24 μV/K and drastic reduction in the values of κ from ∼0.88 W/mK to ∼0.23 W/mK are observed as crystallite size is reduced from 49 nm to 20 nm at ∼600 K. Also, fall in the values of ρ in the paramagnetic (PM) insulator phase (400–600 K) are effectively responsible for the increasing trend in the values of ZT at high temperature. For the crystallite size of 41 nm, the value of ZT at 600 K was found to be ∼0.017.

Topological sigma B model in 4-dimensions

International Nuclear Information System (INIS)

Jun, Hyun-Keun; Park, Jae-Suk

2008-01-01

We propose a 4-dimensional version of topological sigma B-model, governing maps from a smooth compact 4-manifold M to a Calabi-Yau target manifold X. The theory depends on complex structure of X, while is independent of Kaehler metric of X. The theory is also a 4-dimensional topological field theory in the sense that the theory is independent of variation of Riemannian metric of the source 4-manifold M, potentially leading to new smooth invariant of 4-manifolds. We argue that the theory also comes with a topological family parametrized by the extended moduli space of complex structures.

Analysis of the B-RAFV600E mutation in cutaneous melanoma patients with occupational sun exposure

Science.gov (United States)

CANDIDO, SAVERIO; RAPISARDA, VENERANDO; MARCONI, ANDREA; MALAPONTE, GRAZIA; BEVELACQUA, VALENTINA; GANGEMI, PIETRO; SCALISI, AURORA; McCUBREY, JAMES A.; MAESTRO, ROBERTA; SPANDIDOS, DEMETRIOS A.; FENGA, CONCETTINA; LIBRA, MASSIMO

2014-01-01

Sun-exposure is one of the risk factors associated with the development of a cutaneous neoplasm. In melanoma, the Ras-Raf-MEK-ERK (MAPK) signaling pathway is constitutively activated through multiple mechanisms, including B-RAF mutation. It has been hypothesized that B-RAF mutations in melanocytic lesions arise from DNA damage induced by ultraviolet (UV) radiation. However, it is still discussed if B-RAF mutations are associated with melanoma patients exposed to the sun. Therefore, in the present study, the known B-RAFV600E mutation was analysed in melanoma samples from 30 indoor and 38 outdoor workers. B-RAFV600E mutation was detected in 52 and 73% of outdoor workers and indoor workers, respectively. Of note, this mutation was identified in 12 of 14 (85%) melanoma of the trunk diagnosed in indoor workers and in 9 of 19 (47%) samples from outdoor workers (p=0.03). By analyzing melanomas of other body sites, no statistical difference in the frequency of B-RAFV600E mutation was identified between the groups of workers. It appears that the mutation detected among indoor workers may be associated with a recreational or intermittent exposure to the sun, as usually the trunk is a sun-protected body site. Overall, these data indicate that the B-RAFV600E mutation detected in melanoma is not associated with a chronic exposure to the sun. Mutations detected in other genes may also contribute to melanoma development in the subset of patients exposed to UV radiation. PMID:24424406

75 FR 34657 - Airworthiness Directives; Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440...

Science.gov (United States)

2010-06-18

... ``dry'' ADG [air driven generator] (Hamilton Sundstrand part number in the 761339 series), in the aft area of the strut and generator housing assembly, have been reported on CL-600-2B19 aircraft. The same... typically 45 days, which is consistent with the comment period for domestic transport ADs. We will post all...

Molecular Basis of Inactive B-RAF(WT) and B-RAF(V600E) Ligand Inhibition, Selectivity and Conformational Stability: An in Silico Study

DEFF Research Database (Denmark)

Fratev, Filip Filipov; Jonsdottir, Svava Osk; Mihaylova, E.

2009-01-01

-PBSA and local-binding energy (LBE) approaches. The conformational stability of the unbounded kinases and in particular the processes of the B-RAF(V600E) mutant activation were analyzed. A unique salt bridge network formed mainly by the catalytic residues was identified in the unbounded B...... effects on B-RAF(V600E) was revealed, which can explain the low mutant selectivity observed for numerous inhibitors. Our results suggest that the interactions between the activation segment and the alpha C-helix, as well as between the residues in the salt bridge network, are the major mechanism of the B...

Preliminary Economic Assessment of KALIMER-600

International Nuclear Information System (INIS)

Moon, Kee-Hwan; Kim, Seung-Su; Hahn, Do-Hee

2008-01-01

The GIF(GEN IV International Forum) established an Economic Modelling Working Group(EMWG) in 2003 to create economic models and guidelines to facilitate in a future evaluation of the Generation IV nuclear energy systems and assess progress toward the GIF economic goals. These goals are to have a life cycle cost advantage over other energy sources, and to have a level of financial risk comparable to other energy projects. To do this, EMWG has been developed the G4-ECONS model, which is a generic EXCEL-based model for computation of the projected levelized unit electricity cost and/or levelized non-electricity unit product cost from GEN IV energy systems. KALIMER-600 has been developed as a new design concept based on the KALIMER-150 design. KALIMER-600 is a unique design concept which has a potential to achieve GEN IV technology goals even though there is a room for a design improvement in order to make the KALIMER-600 more competitive with future generation reactors. The objective of this study is to the assess economics of KALIMER-600 by using the G4-ECONS model

Design concept of KALIMER-600

International Nuclear Information System (INIS)

Hahn, Dohee; Kim, Yeong-Il; Kim, Seong-O; Lee, Jae-Han; Lee, Yong-Bum

2005-01-01

KALIMER-600 is a pool-type sodium-cooled reactor loaded with U-TRU-10%Zr metal fuels generating the net electricity output of 600 MWe. In order to enhance the proliferation resistance, no blanket assemblies are loaded in the core. To suppress the high power peaking factor, some of the fuel rods are replaced with B 4 C rods and dummy rods. The heat transport system is comprised of two independent loops of IHTS and SGS and the safety-grade residual heat removal system, PDRC, is a completely passive system. Main features of the mechanical structure design of KALIMER-600 are the seismically isolated reactor building, the reduced total pipe length of the IHTS, the simplified reactor support, and the compact reactor internal structures. From the safety analyses, the KALIMER-600 design is verified to be capable of accommodating all the analyzed ATWS events. This self-regulation capability of the KALIMER-600 is mainly due to the inherent reactivity feedback mechanisms and completely passive PDRC system. (author)

Dabrafenib in patients with Val600Glu or Val600Lys BRAF-mutant melanoma metastatic to the brain (BREAK-MB): a multicentre, open-label, phase 2 trial.

Science.gov (United States)

Long, Georgina V; Trefzer, Uwe; Davies, Michael A; Kefford, Richard F; Ascierto, Paolo A; Chapman, Paul B; Puzanov, Igor; Hauschild, Axel; Robert, Caroline; Algazi, Alain; Mortier, Laurent; Tawbi, Hussein; Wilhelm, Tabea; Zimmer, Lisa; Switzky, Julie; Swann, Suzanne; Martin, Anne-Marie; Guckert, Mary; Goodman, Vicki; Streit, Michael; Kirkwood, John M; Schadendorf, Dirk

2012-11-01

Brain metastases are common in patients with metastatic melanoma and median overall survival from their diagnosis is typically 17-22 weeks. We assessed dabrafenib in patients with Val600Glu or Val600Lys BRAF-mutant melanoma metastatic to the brain. We undertook a multicentre, open-label, phase 2 trial in 24 centres in six countries. We enrolled patients with histologically confirmed Val600Glu or Val600Lys BRAF-mutant melanoma and at least one asymptomatic brain metastasis (≥5 mm and ≤40 mm in diameter). Eligible patients were aged 18 years or older, had an Eastern Cooperative Oncology Group performance status of 0 or 1, and had adequate organ function. Patients were split into two cohorts: those in cohort A had not received previous local treatment for brain metastases and those in cohort B had progressive brain metastases after previous local treatments. Patients received 150 mg oral dabrafenib twice a day until disease progression, death, or unacceptable adverse events. The primary endpoint was the proportion of patients with Val600Glu BRAF-mutant melanoma who achieved an overall intracranial response, which was defined as a complete response or partial response assessed with a modified form of Response Evaluation Criteria in Solid Tumors (RECIST 1.1). We included patients who received at least one dose of dabrafenib in efficacy and safety analyses. This study is registered with ClinicalTrials.gov, number NCT01266967. Between Feb 2, 2011, and Aug 5, 2011, we enrolled 172 patients: 89 (52%) in cohort A and 83 (48%) in cohort B. 139 (81%) had Val600Glu BRAF-mutant melanoma. 29 (39·2%, 95% CI 28·0-51·2) of 74 patients with Val600Glu BRAF-mutant melanoma in cohort A achieved an overall intracranial response, as did 20 (30·8%, 19·9-43·4) of 65 in cohort B. One (6·7%, 0·2-31·9) of 15 patients with Val600Lys BRAF-mutant melanoma achieved an overall intracranial response in cohort A, as did four (22·2%, 6·4-47·6) of 18 such patients in cohort B. Treatment

The phosphorylation specificity of B-RAF(WT), B-RAF(D594V), B-RAF(V600E) and B-RAF(K601E) kinases: An in silico study

DEFF Research Database (Denmark)

Fratev, Filip Filipov; Jonsdottir, Svava Osk

2010-01-01

Phosphorylation of the B-RAF kinase is an essential process in tumour induction and maintenance in several cancers. Herein the phosphorylation specificity of the activation segment of the wild type B-RAF kinase and the B-RAF(D594V), B-RAF(V600E) and B-RAF(K601E) mutants was examined by molecular ...

A HRM assay for identification of low level BRAF V600E and V600K mutations using the CADMA principle in FFPE specimens.

Science.gov (United States)

Huebner, Claudia; Weber, Remeny; Lloydd, Richard

2017-12-01

Melanoma patients with BRAF V600E and V600K mutations show complete or partial response to vemurafenib. Detection assays often scan for the common V600E mutation rather than the rare V600K variant, although this mutation can be found in a high proportion of melanoma patients in the South Pacific. Herein, we describe a BRAF high resolution melting (HRM) assay that can differentiate low level of V600E and V600K mutations using formalin fixed, paraffin embedded (FFPE) reference standards for assay validation. The assay is based on the competitive amplification of differentially melting amplicons (CADMA principle) and has a limit of detection of 0.8% mutant allele for V600K and 1.4% mutant allele for V600E. A differentiation between the two mutations based on the melting profile is possible even at low mutation level. Sixty FFPE specimens were scanned and mutations could be scored correctly as confirmed by castPCR. In summary, the developed HRM assay is suitable for detection of V600K and V600E mutations and proved to be reliable and cost effective in a diagnostic environment. Copyright © 2017 Royal College of Pathologists of Australasia. Published by Elsevier B.V. All rights reserved.

Chemical interaction of B4C, B, and C with Mo/Si layered structures

International Nuclear Information System (INIS)

Rooij-Lohmann, V. I. T. A. de; Veldhuizen, L. W.; Zoethout, E.; Yakshin, A. E.; Kruijs, R. W. E. van de; Thijsse, B. J.; Gorgoi, M.; Schaefers, F.; Bijkerk, F.

2010-01-01

To enhance the thermal stability, B 4 C diffusion barrier layers are often added to Mo/Si multilayer structures for extreme ultraviolet optics. Knowledge about the chemical interaction between B 4 C and Mo or Si, however is largely lacking. Therefore, the chemical processes during annealing up to 600 deg. C of a Mo/B 4 C/Si layered structure have been investigated in situ with hard x-ray photoelectron spectroscopy and ex situ with depth profiling x-ray photoelectron spectroscopy. Mo/B/Si and Mo/C/Si structures have also been analyzed as reference systems. The chemical processes in these systems have been identified, with two stages being distinguished. In the first stage, B and C diffuse and react predominantly with Mo. MoSi x forms in the second stage. If the diffusion barrier consists of C or B 4 C, a compound forms that is stable up to the maximum probed temperature and annealing time. We suggest that the diffusion barrier function of B 4 C interlayers as reported in literature can be caused by the stability of the formed compound, rather than by the stability of B 4 C itself.

Determination of surface oxide compositions on Alloy 600 using Rutherford backscattering

International Nuclear Information System (INIS)

Hanson, A.L.; Isaacs, H.S.; Kraner, H.W.

1984-01-01

The surface composition of oxides formed on Alloy 600 under conditions similar to those in the primary side of PWR heat exchangers has been studied as a function of potential using Rutherford backscattering and proton inelastic scattering. Electropolished samples of Alloy 600 were exposed at several potentials to a solution of 0.18M H 3 BO 3 (2000 ppM B) with 0.28M LiOH (1.4 ppM Li) at 300 0 C for 450 hours. The potentials relative to an internal hydrogen electrode ranged from -.09 to 750 mV. RBS analysis showed little or no oxide formation on samples exposed at 0 mV. Above 0 mV oxide layers formed whose thicknesses increased with potential. In addition the RBS showed a significantly enhanced concentration of aluminum and silicon in oxide. Both the oxygen and the sum of the aluminum and silicon content appeared to maintain a fixed surface concentration independent of the oxide thickness. Boron and lithium concentration were analyzed with proton inelastic scattering. No lithium was found in any sample. The boron concentration was found to follow the thickness of the oxide

Protective Effect of Zingiber Officinale against CCl4-Induced Liver Fibrosis Is Mediated through Downregulating the TGF-β1/Smad3 and NF-ĸB/IĸB Pathways.

Science.gov (United States)

Hasan, Iman H; El-Desouky, M A; Hozayen, Walaa G; Abd el Aziz, Ghada M

2016-01-01

No ideal hepatoprotective agents are available in modern medicine to effectively prevent liver disorders. In this study, we aimed at evaluating the potential of Zingiber officinale in the regression of liver fibrosis and its underlining mechanism of action. To induce liver fibrosis, male Wistar rats received CCl4 (2 ml/kg/2 times/week; i.p.), with and without 300 or 600 mg/kg Z. officinale extract daily through oral gavage. To assess the protective effect of Z. officinale, liver function parameters, histopathology, inflammatory markers and gene expression of transforming growth factor-beta 1 (TGF-β1)/Smad3 and nuclear factor-kappa B (NF-ĸB)/IĸB pathways were analyzed. Results demonstrate that Z. officinale extract markedly prevented liver injury as evident by the decreased liver marker enzymes. Concurrent administration of Z. officinale significantly protected against the CCl4-induced inflammation as showed by the decreased pro-inflammatory cytokine levels as well as the downregulation of the NF-ĸB)/IĸB and TGF-β1/Smad3 pathways in CCl4-administered rats. In conclusion, our study provides evidence that the protective effect of Z. officinale against rat liver fibrosis could be explained through its ability to modulate the TGF-β1/Smad3 and NF-ĸB)/IĸB signaling pathways. © 2015 S. Karger AG, Basel.

40 CFR 600.109-08 - EPA driving cycles.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false EPA driving cycles. 600.109-08 Section... Model Year Automobiles-Test Procedures § 600.109-08 EPA driving cycles. (a) The FTP driving cycle is prescribed in § 86.115 of this chapter. (b) The highway fuel economy driving cycle is specified in this...

Diffusion-controlled intergranular penetration and embrittlement of copper by liquid bismuth between 300 and 600 Celsius degrees; Penetration intergranulaire fragilisante du cuivre par le bismuth liquide: identification de la cinetique et du mecanisme de type diffusionnel entre 300 et 600 deg

Energy Technology Data Exchange (ETDEWEB)

Laporte, V

2005-02-15

Hybrid reactors are a new concept for energy production and nuclear waste treatment. Among other requirements, structural materials have to withstand liquid metal embrittlement. This thesis aimed therefore to identify the controlling mechanism for the intergranular embrittlement of copper in contact with liquid bismuth. Scanning electron microscopy, Auger electron spectroscopy, X-ray photoelectron spectroscopy and Rutherford backscattering spectroscopy have been used to analyze fracture surfaces of both copper polycrystals and a copper bicrystal (symmetric tilt boundary 50 degrees <100>). These analyses reveal both parabolic intergranular penetration kinetics and a maximal intergranular bismuth concentration that is less than two monolayers equivalent. These two results allow us to identify grain boundary diffusion as the controlling mechanism for the intergranular penetration of copper by liquid bismuth between 300 and 600 Celsius degrees, showing the absence of perfect grain boundary wetting. (author)

Changes in the expression of Hepatic Cytochrome P450 Isoenzymes 2E1, 2B1/2, 4A, and 2C6 in mice infected with different levels of Schistosoma Mansoni Cercariae

International Nuclear Information System (INIS)

Sheweita, Salah A.

2005-01-01

Most xenobiotic agents are metabolized by cytochrome P450 system. In the present study, Western blotting was used to investigate the effect of different levels of Schistosoma Mansoni infection on the expression of somr cytochrome P450 isozymes (CYP 2E1, 2B1/2, 2C6, 4A) and to enzyme assay their related metabolic functions in mouse liver microsomes. Male mice were infected with 60, 120, 180, 300 and 600 Schistosoma Mansoni cercariae per mouse for 33 days and 60, 120, 180 and 300 cercariae/mouse with no change at the last level of Schistosoma Mansoni infection. Also the expression of CYP 4A was potentially induced at all levels of Schistosoma Mansoni infection. A significant induction of CYP 2B1/2 expression was observed at all levels of Schistosoma Mansoni infection with loss of signal at 180 cercariaea/mouse. In contrast, CYP 2C6 expression was induced at the first two levels and such expression was decreased at the last three levels. In addition, the infection of the mouse with 60, 120 and 180 cercariae/mouse decreased; [1] 7-methoxycoumarin O-demethylase activity by 36, 54 and 58% respectively; [2] 7-ethoxycoumarin O-deethylase activity by 33, 40 and 57% respectively; [3] coumarin hydroxlase activity by 33, 45 and 55% respectively. However, 300 and 600 cercariae/mouse induced: [1] 7-methoxycoumarin O-demethylase activity by 45 and 97% respectively: [2] 7-ethoxycoumarin O-deethylase activity by 26 and 90% respectively; [3] coumarin hydroxylase activity by 100 and 200% respectively. In addition, all levels of Schistosoma Mansoni infection decreased the sleeping time caused by hexobarital. It is concluded that different levels of Schistosoma Mansoni infection change the expression of different CYPisozymes and that these alterations could enhance the carcinogenicity of N-nitrosamines which is mainly dependent on CYP 2E1. The alterations in the expression of CYP 2E1, 4A and 2B1/2 isozymes as a result of Schistosoma Mansoni infection may change the therapeutic actions

NF-κB suppresses HIF-1α response by competing for P300 binding

International Nuclear Information System (INIS)

Mendonca, Daniela B.S.; Mendonca, Gustavo; Aragao, Francisco J.L.; Cooper, Lyndon F.

2011-01-01

Research highlights: → p65 completely blocked HIF-1α activity at the HRE on different cell lines. → p65 caused minor changes in HIF-1α and HIF-1α target genes mRNA expression. → p65 reduced transcription of VEGF promoter. → p65 competes with HIF-1α for p300. -- Abstract: Hypoxia has emerged as a key determinant of osteogenesis. HIF-1α is the transcription factor mediating hypoxia responses that include induction of VEGF and related bone induction. Inflammatory signals antagonize bone repair via the NF-κB pathway. The present investigation explored the functional relationship of hypoxia (HIF-1α function) and inflammatory signaling (NF-κB) in stem like and osteoprogenitor cell lines. The potential interaction between HIF-1α and NF-κB signaling was explored by co-transfection studies in hFOB with p65, HIF-1α and 9x-HRE-luc or HIF-1α target genes reporter plasmids. Nuclear cross-talk was directly tested using the mammalian Gal4/VP16 two-hybrid, and confirmed by co-immunoprecipitation/western blotting assays. The results show that inflammatory stimulation (TNF-α treatment) causes a marked inhibition of HIF-1α function at the HRE in all cell lines studied. Also, co-transfection with p65 expression vector leads to reduced hVEGFp transcription after DFO-induced hypoxia. However, TNF-α treatment had little effect on HIF-1α mRNA levels. The functional interaction of Gal4-HIF-1α and VP16-p300 fusion proteins is effectively blocked by expression of p65 in a dose dependent manner. It was concluded that NF-κB-mediated inflammatory signaling is able to block HIF-1α transactivation at HRE-encoding genes by direct competition for p300 binding at the promoter. Inflammation may influence the stem cell niche and tissue regeneration by influencing cellular responses to hypoxia.

Thermodynamic comparision of R744/R600a and R744/R600 used in mid-high temperature heat pump system

Directory of Open Access Journals (Sweden)

Fan Xiao-Wei

2014-01-01

Full Text Available The mid-high temperature heat pump provides hot water at a relatively high temperature using some industrial waste heat as its source. Now, the main refrigerants in this application are CFC114, HCFC123, and HCFC142b, etc., which are scheduled to be phased out due to their high ozone depletion potential and global warmth potential. Some studies have been conducted to find an eco-friendly alternative. In this paper, the natural non-azeotropic mixtures R744/R600a and R744/R600 are analyzed as alternatives. The performance of the heat pump system using new mixture is discussed and compared with those with CFC114, HCFC123, and HCFC142b. Under the given operating conditions, the maximum heating COP should occur at the mass fractions of 18/82 for R744/R600a and 10/90 for R744/R600. Both of their COP are higher than those with the refrigerants of CFC114, HCFC123, and HCFC142b. The COP and volumetric heating capacity of the system with R744/R600a are superior to those with R744/R600.

Air oxidation of Zircaloy-4 in the 600-1000 °C temperature range: Modeling for ASTEC code application

Science.gov (United States)

Coindreau, O.; Duriez, C.; Ederli, S.

2010-10-01

Progress in the treatment of air oxidation of zirconium in severe accident (SA) codes are required for a reliable analysis of severe accidents involving air ingress. Air oxidation of zirconium can actually lead to accelerated core degradation and increased fission product release, especially for the highly-radiotoxic ruthenium. This paper presents a model to simulate air oxidation kinetics of Zircaloy-4 in the 600-1000 °C temperature range. It is based on available experimental data, including separate-effect experiments performed at IRSN and at Forschungszentrum Karlsruhe. The kinetic transition, named "breakaway", from a diffusion-controlled regime to an accelerated oxidation is taken into account in the modeling via a critical mass gain parameter. The progressive propagation of the locally initiated breakaway is modeled by a linear increase in oxidation rate with time. Finally, when breakaway propagation is completed, the oxidation rate stabilizes and the kinetics is modeled by a linear law. This new modeling is integrated in the severe accident code ASTEC, jointly developed by IRSN and GRS. Model predictions and experimental data from thermogravimetric results show good agreement for different air flow rates and for slow temperature transient conditions.

Phase diagram of Ti-B-C system in the temperature range of 300-3500 K

International Nuclear Information System (INIS)

Gusev, A.I.

1996-01-01

Calculation of phase equilibrium in the ternary system Ti-B-C in the areas of the TiC y -TiB 2 and B 4 C y -TiB 2 cross sections as well as partial construction of three-dimensional (spatial)diagram of the Ti-B-C system within the temperature range of 300-3500 K is carried out. The form of the isothermal cross section of the ternary system remains almost unchanged up to 1900 K. The most essential change is related to disordering of the low-temperature ordered phases Ti 2 C, Ti 3 C and Ti 6 C 5 of the titanium carbide at T > 950 K [ru

Cyclophilin B is involved in p300-mediated degradation of CHOP in tumor cell adaptation to hypoxia.

Science.gov (United States)

Jeong, K; Kim, H; Kim, K; Kim, S-J; Hahn, B-S; Jahng, G-H; Yoon, K-S; Kim, S S; Ha, J; Kang, I; Choe, W

2014-03-01

The regulation of CCAAT/enhancer-binding protein-homologous protein (CHOP), an endoplasmic reticulum (ER) stress-response factor, is key to cellular survival. Hypoxia is a physiologically important stress that induces cell death in the context of the ER, especially in solid tumors. Although our previous studies have suggested that Cyclophilin B (CypB), a molecular chaperone, has a role in ER stress, currently, there is no direct information supporting its mechanism under hypoxia. Here, we demonstrate for the first time that CypB is associated with p300 E4 ligase, induces ubiquitination and regulates the proteasomal turnover of CHOP, one of the well-known pro-apoptotic molecules under hypoxia. Our findings show that CypB physically interacts with the N-terminal α-helix domain of CHOP under hypoxia and cooperates with p300 to modulate the ubiquitination of CHOP. We also show that CypB is transcriptionally induced through ATF6 under hypoxia. Collectively, these findings demonstrate that CypB prevents hypoxia-induced cell death through modulation of ubiquitin-mediated CHOP protein degradation, suggesting that CypB may have an important role in the tight regulation of CHOP under hypoxia.

40 CFR 600.313-01 - Timetable for data and information submittal and review.

Science.gov (United States)

2010-07-01

... constraints (except for manufacturers designated under § 600.312(a)(4) who shall submit the information no... running changes (as required under § 600.314(b)), the submission must be made at least five working days before the date of implementation of the running change. (b) A manufacturer may not proceed with any...

40 CFR 600.313-86 - Timetable for data and information submittal and review.

Science.gov (United States)

2010-07-01

... constraints (except for manufacturers designated under § 600.312(a)(4) who shall submit the information no... running changes (as required under § 600.314(b)), the submission must be made at least five working days before the date of implementation of the running change. (b) A manufacturer may not proceed with any...

Real-time PCR quantification of human complement C4A and C4B genes

Directory of Open Access Journals (Sweden)

Fust George

2006-01-01

Full Text Available Abstract Background The fourth component of human complement (C4, an essential factor of the innate immunity, is represented as two isoforms (C4A and C4B in the genome. Although these genes differ only in 5 nucleotides, the encoded C4A and C4B proteins are functionally different. Based on phenotypic determination, unbalanced production of C4A and C4B is associated with several diseases, such as systemic lupus erythematosus, type 1 diabetes, several autoimmune diseases, moreover with higher morbidity and mortality of myocardial infarction and increased susceptibility for bacterial infections. Despite of this major clinical relevance, only low throughput, time and labor intensive methods have been used so far for the quantification of C4A and C4B genes. Results A novel quantitative real-time PCR (qPCR technique was developed for rapid and accurate quantification of the C4A and C4B genes applying a duplex, TaqMan based methodology. The reliable, single-step analysis provides the determination of the copy number of the C4A and C4B genes applying a wide range of DNA template concentration (0.3–300 ng genomic DNA. The developed qPCR was applied to determine C4A and C4B gene dosages in a healthy Hungarian population (N = 118. The obtained data were compared to the results of an earlier study of the same population. Moreover a set of 33 samples were analyzed by two independent methods. No significant difference was observed between the gene dosages determined by the employed techniques demonstrating the reliability of the novel qPCR methodology. A Microsoft Excel worksheet and a DOS executable are also provided for simple and automated evaluation of the measured data. Conclusion This report describes a novel real-time PCR method for single-step quantification of C4A and C4B genes. The developed technique could facilitate studies investigating disease association of different C4 isotypes.

Epstein-Barr Virus Nuclear Antigen Leader Protein Coactivates EP300.

Science.gov (United States)

Wang, Chong; Zhou, Hufeng; Xue, Yong; Liang, Jun; Narita, Yohei; Gerdt, Catherine; Zheng, Amy Y; Jiang, Runsheng; Trudeau, Stephen; Peng, Chih-Wen; Gewurz, Benjamin E; Zhao, Bo

2018-05-01

Epstein-Barr virus nuclear antigen (EBNA) leader protein (EBNALP) is one of the first viral genes expressed upon B-cell infection. EBNALP is essential for EBV-mediated B-cell immortalization. EBNALP is thought to function primarily by coactivating EBNA2-mediated transcription. Chromatin immune precipitation followed by deep sequencing (ChIP-seq) studies highlight that EBNALP frequently cooccupies DNA sites with host cell transcription factors (TFs), in particular, EP300, implicating a broader role in transcription regulation. In this study, we investigated the mechanisms of EBNALP transcription coactivation through EP300. EBNALP greatly enhanced EP300 transcription activation when EP300 was tethered to a promoter. EBNALP coimmunoprecipitated endogenous EP300 from lymphoblastoid cell lines (LCLs). EBNALP W repeat serine residues 34, 36, and 63 were required for EP300 association and coactivation. Deletion of the EP300 histone acetyltransferase (HAT) domain greatly reduced EBNALP coactivation and abolished the EBNALP association. An EP300 bromodomain inhibitor also abolished EBNALP coactivation and blocked the EP300 association with EBNALP. EBNALP sites cooccupied by EP300 had significantly higher ChIP-seq signals for sequence-specific TFs, including SPI1, RelA, EBF1, IRF4, BATF, and PAX5. EBNALP- and EP300-cooccurring sites also had much higher H3K4me1 and H3K27ac signals, indicative of activated enhancers. EBNALP-only sites had much higher signals for DNA looping factors, including CTCF and RAD21. EBNALP coactivated reporters under the control of NF-κB or SPI1. EP300 inhibition abolished EBNALP coactivation of these reporters. Clustered regularly interspaced short palindromic repeat interference targeting of EBNALP enhancer sites significantly reduced target gene expression, including that of EP300 itself. These data suggest a previously unrecognized mechanism by which EBNALP coactivates transcription through subverting of EP300 and thus affects the expression of

Modeling the 6,300-angstrom low-latitude nightglow

International Nuclear Information System (INIS)

Fesen, C.G.; Abreu, V.J.

1987-01-01

Observations of the 6,300-angstrom nightglow form the Visible Airglow Experiment (VAE) instrument on AE-E are presented for spring equinox, solar cycle maximum conditions. The data comprise altitude profiles and integrated column brightness maps from ∼1,800 to 0400 LT and within ±30 degrees of the dip equator. The data clearly show near-midnight enhancements of the 6,300-angstrom emission. Attempts to model the column brightness maps indicated that these enhancements are due to tidal effects: the enhancements were only reproduced in the theoretical calculations which included upward propagating tidal components in the neutral winds. Further, low equatorial intensities were observed by the VCAE which could only be simulated by assuming that the phase of the E x B drift by shifted 1 hour LT; i.e., upward drift persists until 2,000 LT instead of 1,900 LT. The VAE observations could be reasonably simulated with the phase shift in the E x B drift and with the dip and geographic equators offset. The major discrepancy is in the magnitude of the nightglow maxima: the calculated intensities are a maximum of 2 times too large. Possible sources are uncertainties in the neutral densities, chemistry, and rate coefficients and in the neutral winds

Oxide Morphology of a FeCrAl Alloy, Kanthal APMT, Following Extended Aging in Air at 300 °C to 600 °C

Science.gov (United States)

Li, Nan; Parker, Stephen S.; Wood, Elizabeth S.; Nelson, Andrew T.

2018-05-01

Iron-chromium-aluminum (FeCrAl) alloys are of interest to the nuclear materials community due to their resistance to high-temperature steam oxidation under accident conditions. The present work investigates oxide formation at temperatures relevant to light water reactor cladding operation following extended aging to assess growth kinetics, chemical composition, and microstructure of oxide formation on a commercial FeCrAl alloy, Fe-21 wt pct Cr-5 wt pct Al-3 wt pct Mo (Kanthal APMT). Aging treatments were performed for 100 to 1000 hours in stagnant air at 300 °C, 400 °C, 500 °C, and 600 °C, respectively. Oxide growth behavior under the investigated conditions follows a logarithmic time dependence. When the oxidization temperature is 400 °C or below, the oxide is amorphous. At 500 °C, isolated crystalline regions start to appear during short period aging time and expand with extended exposures. Crystalline α-Al2O3 oxide film develops at 600 °C and the correlated logarithmic rate constant decreases significantly, indicating enhanced oxidation resistance of the formed oxide film. In addition, Mo segregation at grain boundaries has been observed when the aging temperature exceeds 500 °C. The results of this study can be viewed as an upper bounding result for potential oxide coarsening during reactor operation.

Fatigue-creep life prediction for a notched specimen of 2[1]/[4]Cr-1Mo steel at 600 C

International Nuclear Information System (INIS)

Inoue, Tatsuo; Sakane, Masao; Fukuda, Yoshio; Igari, Toshihide; Miyahara, Mitsuo; Okazaki, Masakazu

1994-01-01

This paper presents the life prediction of 2[1]/[4]Cr-1Mo notched specimens subjected to fast-fast, slow-slow and hold-time loadings at 600 C. The crack initiation lives of notched specimens were estimated based on the local stress-strain calculated by inelastic finite element analyses. For the life prediction, combinations of seven different constitutive models and five fatigue-creep damage laws were used. The applicability of the constitutive model and damage law is discussed. The constitutive models predict similar stress-strain relations at the notch root, leading to similar predicted lives. The damage model, however, has a much larger influence on the life prediction. ((orig.))

Influence of photosynthetically active radiation and spectral quality on UV-B-induced polyamine accumulation in soybean

International Nuclear Information System (INIS)

Kramer, G.F.; Krizek, D.T.; Mirecki, R.M.

1992-01-01

UV-B-sensitive (Essex) and -insensitive (Williams) cultivars of soybean (Glycine max) were grown in growth chambers at photosynthetically active radiation (PAR) levels of 300 or 600 μmol m −2 sec −1 provided by either red- and far-red-deficient (MH) or blue-deficient (HPS/DX) lamps or a combination of both. The combined treatment provided a balanced output, similar to that provided by fluorescent plus incandescent lighting across the visible spectrum. Under the combined lamps, plants were exposed to 12 kJ m −2 day −1 of biologically effective UV-B (UV-B BE ) with 6-hr irradiance periods centred midway through the photoperiod. This irradiance corresponded to a decrease in stratospheric ozone of ca 20% for clear sky conditions at Beltsville, MD on 21 June. Plant growth was significantly inhibited by UV-B at 300 but not at 600 μmol m −2 sec −1 PAR. No cultivar differences were noted in the UV-B-induced inhibition of growth, although visible injury was less in Williams than in Essex. PAR had a large effect on polyamine levels in leaves, with higher levels of putrescine (Put) and spermidine observed at 600 than at 300 μmol m −2 sec −1 in both cultivars. UV-B-induced polyamine accumulation was observed primarily in Williams. Under MH or HPS/DX lamps alone, plants were exposed to two different UV-B levels, 9.9 and 12 kJ m −2 day −1 , corresponding to stratospheric ozone reductions of ca 9 and 20%. UV-B inhibited growth at both 300 and 600 μmol m −2 sec −1 PAR under either radiation source. There was no effect of PAR on the UV-B-induced growth inhibition with the HPS/DX lamps, but a partial amelioration of this inhibition occurred in Williams at 600 μmol m −2 sec −1 PAR under MH lamps. Dose-dependent UV-B-induced polyamine accumulation was also observed in both cultivars. PAR increased Put levels under MH but not HPS/DX lamps. These results indicate that the inhibition of UV-B stress by high PAR may require a balance of red and blue

Influence of 17β-estradiol treatment on the expression of NF-κB in complete hydatidiform mole culture

Directory of Open Access Journals (Sweden)

Tatit Nurseta

2013-12-01

Full Text Available Background:  Genetic evidence has established a role of nuclear factor kappa B (NF-κB signaling in oncogenesis. However, activity of NF-κB in complete hydatidiform mole (CHM cell culture under 17β-estradiol (E2 treatment is not yet known. Recently, a positive cross-talk between estrogen receptor (ER and NF-κB to promote survival and progress of cancer cells to a more aggressive phenotype was established. In the present study, we examined the influence of E2 treatment on the NF-κB expression in CHM’s culture.Methods:  This experimental study measured the expression of NF-κB in CHM culture treated with E2: 10, 100, 300, 600, and 1000 pg/mL and without E2. Imunohistochemistry staining was used to assess the expression of NF-κB. Microphotographs were taken using 400x magnification. Adobe photoshop CS2 was used to assess the NF-κB expression in cell nucleus. The lower the color intensity of cell RGBbv, is the higher the expression of NF-κB in cells. ANOVA test was performed to compare the expression of NF-κB.Results: NF-κB expression as indicated by color intensity in control group was 114.84 ± 9.02. NF-κB expression in E2 treatment groups were respectively: E2 10 pg/mL: 106.30 ± 13.95; E2 100 pg/mL: 82.47 ± 4.72; E2 300 pg/mL: 82.24 ± 2.67; E2 600 pg/mL: 69.05 ± 6.47; E2 1000 pg/mL: 68.49 ± 2.37. There was progressive decline in color intensity of cells with E2 treatment indicating the increase expression of NF-κB. Significant differences with the control group occurred in doses of E2 100, 300, 600, dan 1000 pg/mL.Conclusion: Treatment of CHM trophoblast culture with escalating doses of E2 was associated with the increase of NF-κB expression in a dose dependent manner. (Med J Indones. 2013;22:197-201. doi: 10.13181/mji.v22i4.599Keywords: 17-β Estradiol, Hydatidiform mole, NF-κB

Detailed analysis for a control rod worth of the gas turbine high temperature reactor (GTHTR300)

Energy Technology Data Exchange (ETDEWEB)

Nakata, Tetsuo; Katanishi, Shoji; Takada, Shoji; Yan, Xing; Kunitomi, Kazuhiko [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

2002-11-01

GTHTR300 is composed of a simplified and economical power plant based on an inherent safe 600 MWt reactor and a nearly 50% high efficiency gas turbine power conversion cycle. GTHTR300 core consist of annular fuel region, center and outer side reflectors because of cooling it effectively in depressurized accident conditions, and all control rods are located in both side reflectors of annular core. As a thermal neutron spectrum is strongly distorted in reflector regions, an accurate calculation is especially required for the control rod worth evaluation. In this study, we applied the detailed Monte Carlo calculations of a full core model, and confirmed that our design method has enough accuracy. (author)

46 CFR 118.300 - Fire pumps.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Fire pumps. 118.300 Section 118.300 Shipping COAST GUARD... Fire pumps. (a) A self priming, power driven fire pump must be installed on each vessel. (b) On a..., the fire pump must be capable of delivering a single hose stream from the highest hydrant, through the...

A low-temperature (4-300K) constant volume gas thermometer

International Nuclear Information System (INIS)

Combarieu, A. de

1976-01-01

A constant volume gas thermometer was built to calibrate the various secondary thermometers used at low temperature. This gas thermometer is placed in a cryostat where any stable temperature between 4 and 300K may be obtained. The principle is outlined, then the gas thermometer and its auxiliary equipment are briefly described; the corrections to be applied to the results are given and a table shows the values obtained [fr

FORWARD AND INVERSE MODELING OF THE EMISSION AND TRANSMISSION SPECTRUM OF GJ 436B: INVESTIGATING METAL ENRICHMENT, TIDAL HEATING, AND CLOUDS

Energy Technology Data Exchange (ETDEWEB)

Morley, Caroline V. [Department of Astronomy, Harvard University, 60 Garden Street, Cambridge, MA 02138 (United States); Knutson, Heather [Division of Geological and Planetary Sciences, California Institute of Technology, 1200 East California Boulevard, Pasadena, CA 91125 (United States); Line, Michael [School of Earth and Space Exploration, Arizona State University, 781 South Terrace Road, Tempe, AZ 85281 (United States); Fortney, Jonathan J.; Teal, Dillon [Department of Astronomy and Astrophysics, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States); Thorngren, Daniel [Department of Physics, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States); Marley, Mark S.; Lupu, Roxana, E-mail: caroline.morley@cfa.harvard.edu [NASA Ames Research Center, Moffett Field, CA 94035 (United States)

2017-02-01

The Neptune-mass GJ 436b is one of the most studied transiting exoplanets with repeated measurements of its thermal emission and transmission spectra. We build on previous studies to answer outstanding questions about this planet, including its potentially high metallicity and tidal heating of its interior. We present new observations of GJ 436b’s thermal emission at 3.6 and 4.5 μ m, which reduce uncertainties in estimates of GJ 436b’s flux at those wavelengths and demonstrate consistency between Spitzer observations spanning more than 7 yr. We analyze the Spitzer thermal emission photometry and Hubble WFC3 transmission spectrum. We use a dual-pronged modeling approach of both self-consistent and retrieval models. We vary the metallicity, intrinsic luminosity from tidal heating, disequilibrium chemistry, and heat redistribution. We also study clouds and photochemical hazes, but do not find strong evidence for either. The self-consistent and retrieval models combine to suggest that GJ 436b has a high atmospheric metallicity, with best fits at or above several hundred times solar metallicity, tidal heating warming its interior with best-fit intrinsic effective temperatures around 300–350 K, and disequilibrium chemistry. High metal enrichments (>600× solar) occur from the accretion of rocky, rather than icy, material. Assuming the interior temperature T {sub int} ∼ 300–350 K, we find a dissipation factor Q ′ ∼ 2 × 10{sup 5}–10{sup 6}, larger than Neptune’s Q ′, implying a long tidal circularization timescale for the orbit. We suggest that Neptune-mass planets may be more diverse than imagined, with metal enhancements spanning several orders of magnitude, to perhaps over 1000× solar metallicity. High-fidelity observations with instruments like the James Webb Space Telescope will be critical for characterizing this diversity.

40 CFR 600.209-08 - Calculation of vehicle-specific 5-cycle fuel economy values for a model type.

Science.gov (United States)

2010-07-01

...-cycle fuel economy values for a model type. 600.209-08 Section 600.209-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1977 and Later Model Year Automobiles-Procedures for...

The F4/AS01B HIV-1 Vaccine Candidate Is Safe and Immunogenic, But Does Not Show Viral Efficacy in Antiretroviral Therapy-Naive, HIV-1-Infected Adults: A Randomized Controlled Trial.

Science.gov (United States)

Dinges, Warren; Girard, Pierre-Marie; Podzamczer, Daniel; Brockmeyer, Norbert H; García, Felipe; Harrer, Thomas; Lelievre, Jean-Daniel; Frank, Ian; Colin De Verdière, Nathalie; Yeni, Guy-Patrick; Ortega Gonzalez, Enrique; Rubio, Rafael; Clotet Sala, Bonaventura; DeJesus, Edwin; Pérez-Elias, Maria Jesus; Launay, Odile; Pialoux, Gilles; Slim, Jihad; Weiss, Laurence; Bouchaud, Olivier; Felizarta, Franco; Meurer, Anja; Raffi, François; Esser, Stefan; Katlama, Christine; Koletar, Susan L; Mounzer, Karam; Swindells, Susan; Baxter, John D; Schneider, Stefan; Chas, Julie; Molina, Jean-Michel; Koutsoukos, Marguerite; Collard, Alix; Bourguignon, Patricia; Roman, François

2016-02-01

The impact of the investigational human immunodeficiency virus type 1 (HIV-1) F4/AS01B vaccine on HIV-1 viral load (VL) was evaluated in antiretroviral therapy (ART)-naive HIV-1 infected adults.This phase IIb, observer-blind study (NCT01218113), included ART-naive HIV-1 infected adults aged 18 to 55 years. Participants were randomized to receive 2 (F4/AS01B_2 group, N = 64) or 3 (F4/AS01B_3 group, N = 62) doses of F4/AS01B or placebo (control group, N = 64) at weeks 0, 4, and 28. Efficacy (HIV-1 VL, CD4 T-cell count, ART initiation, and HIV-related clinical events), safety, and immunogenicity (antibody and T-cell responses) were evaluated during 48 weeks.At week 48, based on a mixed model, no statistically significant difference in HIV-1 VL change from baseline was demonstrated between F4/AS01B_2 and control group (0.073 log10 copies/mL [97.5% confidence interval (CI): -0.088; 0.235]), or F4/AS01B_3 and control group (-0.096 log10 copies/mL [97.5% CI: -0.257; 0.065]). No differences between groups were observed in HIV-1 VL change, CD4 T-cell count, ART initiation, or HIV-related clinical events at intermediate timepoints. Among F4/AS01B recipients, the most frequent solicited symptoms were pain at injection site (252/300 doses), fatigue (137/300 doses), myalgia (105/300 doses), and headache (90/300 doses). Twelve serious adverse events were reported in 6 participants; 1 was considered vaccine-related (F4/AS01B_2 group: angioedema). F4/AS01B induced polyfunctional F4-specific CD4 T-cells, but had no significant impact on F4-specific CD8 T-cell and anti-F4 antibody levels.F4/AS01B had a clinically acceptable safety profile, induced F4-specific CD4 T-cell responses, but did not reduce HIV-1 VL, impact CD4 T-cells count, delay ART initiation, or prevent HIV-1 related clinical events.

A study of long term ageing effects in A533B Class 1 and A508 Class 3 steels

International Nuclear Information System (INIS)

Druce, S.G.

1981-08-01

The effects of long term thermal ageing treatments on notched impact fracture properties has been studied in two commercially produced PWR pressure vessel steels, A533B Class 1 and A508 Class 3. Heat treatments of up to 10,000h duration at temperatures between 300 and 600 0 C have been investigated. Additionally the effects of specimen size, specimen orientation, specimen position from within the plate and the effect of a prior post weld heat treatment on subsequent fracture behaviour following thermal ageing have been evaluated for the A533B Class 1 material. The susceptibility of both materials to temper embrittlement effects is relatively low, the maximum increase in transition temperature following thermal ageing treatments in the temperature range 300 to 500 0 C being about 40 to 45 0 C. Thermal ageing at 600 0 C for times in excess of 100h produces microstructural changes resulting in larger increases in transition temperature. For the A533B material, specimen position and orientation are found to have a large influence on impact behaviour but do not affect the susceptibility to temper embrittlement. Post weld heat treatment has little or no influence on impact fracture behaviour before further isothermal ageing treatments nor on susceptibility to temper embrittlement. (author)

Magnesium diboride(MgB2) wires for applications

International Nuclear Information System (INIS)

Patel, Dipak; Kim, Jung Ho

2016-01-01

Field and temperature dependence of the critical current density, Jc, were measured for both un-doped and carbon doped MgB 2 /Nb/Monel wires manufactured by Hyper Tech Research, Inc. In particular, carbon incorporation into the MgB 2 structure using malic acid additive and a chemical solution method can be advantageous because of the highly uniform mixing between the carbon and boron powders. At 4.2 K and 10 T, Jc was estimated to be 25,000 - 25,300 Acm -2 for the wire sintered at 600 degrees C for 4 hours. The irreversibility field, Birr, of the malic acid doped wire was approximately 21.0 - 21.8 T, as obtained from a linear extrapolation of the J-B characteristic. Interestingly enough, the Jc of the malic acid doped sample exceeds 10 5 Acm -2 at 6 T and 4.2 K, which is comparable to that of commercial Nb-Ti wires

Performance of scientific computing platforms with MCNP4B

International Nuclear Information System (INIS)

McLaughlin, H.E.; Hendricks, J.S.

1998-01-01

Several computing platforms were evaluated with the MCNP4B Monte Carlo radiation transport code. The DEC AlphaStation 500/500 was the fastest to run MCNP4B. Compared to the HP 9000-735, the fastest platform 4 yr ago, the AlphaStation is 335% faster, the HP C180 is 133% faster, the SGI Origin 2000 is 82% faster, the Cray T94/4128 is 1% faster, the IBM RS/6000-590 is 93% as fast, the DEC 3000/600 is 81% as fast, the Sun Sparc20 is 57% as fast, the Cray YMP 8/8128 is 57% as fast, the sun Sparc5 is 33% as fast, and the Sun Sparc2 is 13% as fast. All results presented are reproducible and allow for comparison to computer platforms not included in this study. Timing studies are seen to be very problem dependent. The performance gains resulting from advances in software were also investigated. Various compilers and operating systems were seen to have a modest impact on performance, whereas hardware improvements have resulted in a factor of 4 improvement. MCNP4B also ran approximately as fast as MCNP4A

Magnesium diboride(MgB{sub 2}) wires for applications

Energy Technology Data Exchange (ETDEWEB)

Patel, Dipak; Kim, Jung Ho [Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong, North Wollongong (Australia)

2016-03-15

Field and temperature dependence of the critical current density, Jc, were measured for both un-doped and carbon doped MgB{sub 2}/Nb/Monel wires manufactured by Hyper Tech Research, Inc. In particular, carbon incorporation into the MgB{sub 2} structure using malic acid additive and a chemical solution method can be advantageous because of the highly uniform mixing between the carbon and boron powders. At 4.2 K and 10 T, Jc was estimated to be 25,000 - 25,300 Acm{sup -2} for the wire sintered at 600 degrees C for 4 hours. The irreversibility field, Birr, of the malic acid doped wire was approximately 21.0 - 21.8 T, as obtained from a linear extrapolation of the J-B characteristic. Interestingly enough, the Jc of the malic acid doped sample exceeds 10{sup 5} Acm{sup -2} at 6 T and 4.2 K, which is comparable to that of commercial Nb-Ti wires.

Murine model of acute myocarditis and cerebral cortical neuron edema induced by coxsackievirus B4

Directory of Open Access Journals (Sweden)

Zhao-Peng Dong

2018-01-01

Full Text Available Globally, coxsackievirus B4 (CV-B4 has been continuously isolated and evidence suggests an association with the development of pancreatitis and type I diabetes. In addition, CV-B4 is also associated with myocarditis and severe central nervous system (CNS complications, which remain poorly studied and understood. In the present study, we established an ICR mouse model of CV-B4 infection and examined whether CV-B4 infection resulted in a predisposition to myocarditis and CNS infection. We found high survival in both the treatment and control group, with no significant differences in clinical outcomes observed. However, pathological lesions were evident in both brain and heart tissue of the CV-B4-infected mice. In addition, high viral loads were found in the neural and cardiac tissues as early as 2 d postinfection. Expressions of IFN-γ and IL-6 in sera were significantly higher in CV-B4-infected mice compared to uninfected negative controls, suggesting the involvement of these cytokines in the development of histopathological lesions. Our murine model successfully reproduced the acute myocarditis and cerebral cortical neuron edema induced by CV-B4, and may be useful for the evaluation of vaccine candidates and potential antivirals against CV-B4 infection.

A giant enhancement of CMR in Eu{sub 0.6}Ca{sub 0.4}B{sub 6}

Energy Technology Data Exchange (ETDEWEB)

Glushkov, V V; Bogach, A V; Demishev, S V; Sluchanko, N E [A.M.Prokhorov General Physics Institute of RAS, 38, Vavilov str., Moscow 119991 (Russian Federation); Anisimov, M A [Moscow Institute of Physics and Technology, 9, Institutskii per., Dolgoprudny, Moscow Region 141700 (Russian Federation); Churkin, O A; Kuznetsov, A V [Moscow Engineering Physics Institute, 31, Kashirskoe Shosse, Moscow 115409 (Russian Federation); Filipov, V B; Levchenko, A V; Shitsevalova, N Yu [I. Frantsevich Institute for Problems of Materials Science NAS, 3, Krzhyzhanovsky str., Kiev 03680 (Ukraine); Flachbart, K, E-mail: glushkov@lt.gpi.r [Centre of Low Temperature Physics, IEP SAS and IPS FS UPJS, Kosice SK-04001 (Slovakia)

2010-01-15

The transport and magnetic properties of Eu{sub 0.6}Ca{sub 0.4}B{sub 6} single crystals have been studied at temperatures 1.8-300 K in magnetic fields up to 80 kOe. It was found that lowering of temperature results in a drastic increase of magnetoresistance up to the values of {rho}(0)/{rho}(H){approx}7{center_dot}10{sup 5} detected below 6K. The Hall and Seebeck effect measurements showed that colossal magnetoresistance (CMR) observed in Eu{sub 0.6}Ca{sub 0.4}B{sub 6} is accompanied by a crossover from hole-like to electron-like regime of charge transport induced by applied magnetic field. Hall mobility values {mu}{sub H{approx}}200-350 cm{sup 2}/(Vs) estimated for the high conductive state of Eu{sub 0.6}Ca{sub 0.4}B{sub 6} in the presence of strong substitutional disorder were proved to be comparable with these ones measured for undoped EuB{sub 6}. The anomalous behaviour of transport and magnetic parameters is discussed in terms of metal-insulator transition earlier predicted for this low carrier density system within double exchange model by V M Pereira et al., Phys. Rev. Lett. 93 147202 (2004).

OPT13B and OPTIM4 - computer codes for optical model calculations

International Nuclear Information System (INIS)

Pal, S.; Srivastava, D.K.; Mukhopadhyay, S.; Ganguly, N.K.

1975-01-01

OPT13B is a computer code in FORTRAN for optical model calculations with automatic search. A summary of different formulae used for computation is given. Numerical methods are discussed. The 'search' technique followed to obtain the set of optical model parameters which produce best fit to experimental data in a least-square sense is also discussed. Different subroutines of the program are briefly described. Input-output specifications are given in detail. A modified version of OPT13B specifications are given in detail. A modified version of OPT13B is OPTIM4. It can be used for optical model calculations where the form factors of different parts of the optical potential are known point by point. A brief description of the modifications is given. (author)

Progress on B4C control rod modeling in RELAP/SCDAPSIM with application to quench and Phebus

International Nuclear Information System (INIS)

Kawahara, Keisuke; Hohorst, Judith K.; Allison, Chris M.

2014-01-01

The RELAP/SCDAPSIM code is designed to predict the behavior of reactor systems during normal and accident conditions. RELAP/SCDAPSIM/MOD3.5 is an experimental version of the code with the most advanced fuel and severe accident behavior models and correlations. It includes modeling improvements that were specifically added to support (a) the ongoing experimental severe accident programs in Europe and Japan and (b) the analysis and assessment activities related to the accident at the Fukushima Daiichi NPS. One of the improved models describes the behavior of cylindrical B 4 C control rods used in selected PWR designs and in integral experiments used to assess the heating and melting of PWR, BWR, and VVER assemblies. It replaces an older model that was originally developed by the US Nuclear Regulatory Commission in the mid- 1980's. It includes a combination of new and improved models and correlations to more accurately describe (a) eutectic reactions between Zircaloy, B 4 C, and stainless steel, (b) oxidation for B 4 C, Zircaloy, and stainless steel, and (c) the effects of the gap between the Zircaloy guide tube and the stainless steel sheath surrounding B 4 C pellets used in many control rod designs. This paper will discuss the development of the new model and validation of the model using the PHEBUS B 4 C test, FPT-3, and the KIT quench experiments with a central B 4 C control rod. (authors)

Thermal Power Of The TS-300B Refrigerator in the Aspects of Statistical Research / Moc Cieplna Chłodziarki TS-300B W Aspekcie Badań Statystycznych

Science.gov (United States)

Nowak, Bernard; Łuczak, Rafał

2015-09-01

The article discusses the improvement of thermal working conditions in underground mine workings, using local refrigeration systems. It considers the efficiency of air cooling with direct action air compression refrigerator of the TS-300B type. As a result of a failure to meet the required operating conditions of the aforementioned air cooling system, frequently there are discrepancies between the predicted (and thus the expected) effects of its work and the reality. Therefore, to improve the operating efficiency of this system, in terms of effective use of the evaporator cooling capacity, quality criteria were developed, which are easy in practical application. They were obtained in the form of statistical models, describing the effect of independent variables, i.e. the parameters of the inlet air to the evaporator (temperature, humidity and volumetric flow rate), as well as the parameters of the water cooling the condenser (temperature and volumetric flow rate), on the thermal power of air cooler, treated as the dependent variable. Statistical equations describing the performance of the analyzed air cooling system were determined, based on the linear and nonlinear multiple regression. The obtained functions were modified by changing the values of the coefficients in the case of linear regression, and of the coefficients and exponents in the case of non-linear regression, with the independent variables. As a result, functions were obtained, which were more convenient in practical applications. Using classical statistics methods, the quality of fitting the regression function to the experimental data was evaluated. Also, the values of the evaporator thermal power of the refrigerator, which were obtained on the basis of the measured air parameters, were compared with the calculated ones, by using the obtained regression functions. These statistical models were built on the basis of the results of measurements in different operating conditions of the TS-300B

PWSCC Growth Assessment Model Considering Stress Triaxiality Factor for Primary Alloy 600 Components

Directory of Open Access Journals (Sweden)

Jong-Sung Kim

2016-08-01

Full Text Available We propose a primary water stress corrosion cracking (PWSCC initiation model of Alloy 600 that considers the stress triaxiality factor to apply to finite element analysis. We investigated the correlation between stress triaxiality effects and PWSCC growth behavior in cold-worked Alloy 600 stream generator tubes, and identified an additional stress triaxiality factor that can be added to Garud's PWSCC initiation model. By applying the proposed PWSCC initiation model considering the stress triaxiality factor, PWSCC growth simulations based on the macroscopic phenomenological damage mechanics approach were carried out on the PWSCC growth tests of various cold-worked Alloy 600 steam generator tubes and compact tension specimens. As a result, PWSCC growth behavior results from the finite element prediction are in good agreement with the experimental results.

76 FR 64798 - Airworthiness Directives; Airbus Model A300 B4-103, B4-203, and B4-2C Airplanes

Science.gov (United States)

2011-10-19

... to introduce a greasing action at the level of the pick-up jack fitting. Consequently, this AD also...-hours per product to comply with the basic requirements of this AD. The average labor rate is $85 per... government and the States, or on the distribution of power and responsibilities among the various levels of...

76 FR 33176 - Airworthiness Directives; Airbus Model A300 B4-103, B4-203, and B4-2C Airplanes

Science.gov (United States)

2011-06-08

... Document (MPD) task 321112-0505-1) has been revised to introduce a greasing action at the level of the pick... with the new basic requirements of this proposed AD. The average labor rate is $85 per work-hour. Based... Government and the States, or on the distribution of power and responsibilities among the various levels of...

Measurements of cross section of e+e−→pp¯π0 at center-of-mass energies between 4.008 and 4.600 GeV

Directory of Open Access Journals (Sweden)

M. Ablikim

2017-08-01

Full Text Available Based on e+e− annihilation data samples collected with the BESIII detector at the BEPCII collider at 13 center-of-mass energies from 4.008 to 4.600 GeV, measurements of the Born cross section of e+e−→pp¯π0 are performed. No significant resonant structure is observed in the measured energy dependence of the cross section. The upper limit on the Born cross section of e+e−→Y(4260→pp¯π0 at the 90% C.L. is determined to be 0.01 pb. The upper limit on the ratio of the branching fractions B(Y(4260→pp¯π0B(Y(4260→π+π−J/ψ at the 90% C.L. is determined to be 0.02%.

Comparison of Dextran Perfusion and GSI-B4 Isolectin Staining in a Mouse Model of Oxygen-induced Retinopathy.

Science.gov (United States)

Huang, Shaofen; Liang, Jiajian; Yam, Gary Hin-Fai; Lu, Zhihao; Pang, Chi Pui; Chen, Haoyu

2015-06-01

Oxygen-induced retinopathy (OIR) is a robust and widely used animal model for the study of retinal neovascularization (NV). Dextran perfusion and Griffonia simplicifolia isolectin B4 (GSI-B4) staining are two common methods for examining the occurrence and extent of OIR. This study provides a quantitative comparison of the two for OIR detection. At postnatal day 7 (PN7), fifteen C57BL/6J mice were exposed to a 75% hyperoxic condition for 5 days and then returned to room air conditions. At PN17, the mice received intravitreal injection of GSI-B4 Alexa Fluor 568 conjugate. After 10 hours, they were infused with FITC-dextran conjugate via the left ventricle. Retinal flat mounts were photographed by confocal microscopy. Areas with fluorescent signals and the total retinal areas were quantified by Image J software. Both GSI-B4 and dextran detected the peripheral neovascular area. The mean hyper fluorescence area was 0.33 ± 0.14% of whole retinal area determined by GSI-B4 staining and 0.25 ± 0.28% determined by dextran perfusion. The difference between the two measures was 0.08% (95% CI:-0.59%, 0.43%). The Pearson correlation coefficient between the two methods was 0.386,P =0.035. The mean coincidence rates were 14.3 ± 13.4% and 24.9 ± 18.5% for GSI-B4 and dextran staining, respectively. Both methods can complement each other in demonstrating and quantitatively evaluating retinal NV. A poor agreement was found between the two methods; GSI-B4 isolectin was more effective than FITC-dextran perfusion in evaluating the extent of retinal NV in a mouse model of OIR.

Model calculations for a 600 A laser based on photopumping of Mo6+ by a spectral line of Mo11+

International Nuclear Information System (INIS)

Klapisch, M.; Cohen, M.; Goldstein, W.H.; Feldman, U.

1990-01-01

We assess aspects of the feasibility of a recent proposal to use the coincidence between a Mo 11+ , 136.499 A, line and a 4p 6 -(4p 5 ) 1/2 6s, J=1, transition of Mo 6+ , to obtain amplified spontaneous emission around 600 A. A collisional-radiative model for the Mo 6+ ion, including resonant photoexcitation of the 4p 5 1/2 6s level, was constructed using the HULLAC atomic physics package. The model included the 4s 2 4p 6 ; 4p 5 4d, 4f; 4p 5 5s, 5p, 5d; 4p 5 6s, 6p, 6d; 4s4p 6 4d, 4f; 4p 6 4d 2 and 4s 2 4p 4 4d 2 configurations, amounting to 193 levels. All configuration interactions and collisional mixing were taken into account. A gain of 3 cm -1 is obtained for the 4p 5 6s(J = 1)-4p 5 5p(J = 2) transition at 645 A with T e = 5 eV, n e = 10 18 cm -3 , and an effective radiation temperature of T rad > 40 eV for the pump transition. Other transitions exhibit lower gains. (orig.)

12 CFR 600.10 - Service of Process.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Service of Process. 600.10 Section 600.10 Banks... Procedures for Service Upon the Farm Credit Administration § 600.10 Service of Process. (a) Except as... Administration Board, 1501 Farm Credit Drive, McLean, Virginia 22102-5090. (b) Service of process upon the...

Processing of Mo-Si-B intermetallics by extrusion and oxidation properties of the extruded Tl-MoSi2-MoB Systems

International Nuclear Information System (INIS)

Summers, Eric

1999-01-01

An extrusion process was developed that is able to consistently produce large quantities of Mo-Si-B rods without the presence of defects. Binder removal from the extruded rods was studied in detail and it was determined that heating rates on the order of 0.02degree/minute (1.2degree/hour) are necessary to remove the binder without the formation of defects. This low heating rate resulted in debinding times in excess of 70 hours (∼ 3 days). Wicking was investigated as a means to decrease the time necessary for binder removal. Using 0.05microm alumina powder as a wicking agent, binder removal times were reduced to 10 hours with heating rates up to 1degree/minute employed without defect formation. Once the extrusion process was complete the oxidation properties of the Tl-MoSi 2 -MoB extruded phase assemblage was investigated. It was determined that this composition exhibits catastrophic oxidation or pesting in the temperature range of 660--760 C, resulting in the material turning to dust. Outside of this temperature range the composition is oxidatively stable. Continuous mass measurements were taken at 1,300, 1,450, and 1,600 C to determine the oxidation rate constants of this material. Parabolic rate constants of 6.9 x 10 -3 , 1.3 x 10 -3 , and 9.1 x 10 -3 mg 2 /cm 4 /hr were determined for 1,300, 1,450, and 1,600 C respectively

The Cu-Te-Sb phase system at temperatures between 300 and 1000 degree C

DEFF Research Database (Denmark)

Karup-Møller, Sven

1997-01-01

Phase relations were determined in the Cu-Te-Sb phase system at 300, 350, 400, 500, 600, 700, 800, 900 and 1000 degree C. At temperatures between 400 and 900 degree C a cubic primitive ternary phase A exists. It has the empirical formula Cu(10.32-0.97x)Te(x)Sb(4-x) (Z=2, a=7.682 Å). A small liquid...

The F4/AS01B HIV-1 Vaccine Candidate Is Safe and Immunogenic, But Does Not Show Viral Efficacy in Antiretroviral Therapy-Naive, HIV-1-Infected Adults

Science.gov (United States)

Dinges, Warren; Girard, Pierre-Marie; Podzamczer, Daniel; Brockmeyer, Norbert H.; García, Felipe.; Harrer, Thomas; Lelievre, Jean-Daniel; Frank, Ian; Colin De Verdière, Nathalie; Yeni, Guy-Patrick; Ortega Gonzalez, Enrique; Rubio, Rafael; Clotet Sala, Bonaventura; DeJesus, Edwin; Pérez-Elias, Maria Jesus; Launay, Odile; Pialoux, Gilles; Slim, Jihad; Weiss, Laurence; Bouchaud, Olivier; Felizarta, Franco; Meurer, Anja; Raffi, François; Esser, Stefan; Katlama, Christine; Koletar, Susan L.; Mounzer, Karam; Swindells, Susan; Baxter, John D.; Schneider, Stefan; Chas, Julie; Molina, Jean-Michel; Koutsoukos, Marguerite; Collard, Alix; Bourguignon, Patricia; Roman, François

2016-01-01

Abstract The impact of the investigational human immunodeficiency virus type 1 (HIV-1) F4/AS01B vaccine on HIV-1 viral load (VL) was evaluated in antiretroviral therapy (ART)-naive HIV-1 infected adults. This phase IIb, observer-blind study (NCT01218113), included ART-naive HIV-1 infected adults aged 18 to 55 years. Participants were randomized to receive 2 (F4/AS01B_2 group, N = 64) or 3 (F4/AS01B_3 group, N = 62) doses of F4/AS01B or placebo (control group, N = 64) at weeks 0, 4, and 28. Efficacy (HIV-1 VL, CD4+ T-cell count, ART initiation, and HIV-related clinical events), safety, and immunogenicity (antibody and T-cell responses) were evaluated during 48 weeks. At week 48, based on a mixed model, no statistically significant difference in HIV-1 VL change from baseline was demonstrated between F4/AS01B_2 and control group (0.073 log10 copies/mL [97.5% confidence interval (CI): −0.088; 0.235]), or F4/AS01B_3 and control group (−0.096 log10 copies/mL [97.5% CI: −0.257; 0.065]). No differences between groups were observed in HIV-1 VL change, CD4+ T-cell count, ART initiation, or HIV-related clinical events at intermediate timepoints. Among F4/AS01B recipients, the most frequent solicited symptoms were pain at injection site (252/300 doses), fatigue (137/300 doses), myalgia (105/300 doses), and headache (90/300 doses). Twelve serious adverse events were reported in 6 participants; 1 was considered vaccine-related (F4/AS01B_2 group: angioedema). F4/AS01B induced polyfunctional F4-specific CD4+ T-cells, but had no significant impact on F4-specific CD8+ T-cell and anti-F4 antibody levels. F4/AS01B had a clinically acceptable safety profile, induced F4-specific CD4+ T-cell responses, but did not reduce HIV-1 VL, impact CD4+ T-cells count, delay ART initiation, or prevent HIV-1 related clinical events. PMID:26871794

Phase equilibria in the KFeS2-Fe-S system at 300-600 °C and bartonite stability

Science.gov (United States)

Osadchii, Valentin O.; Voronin, Mikhail V.; Baranov, Alexander V.

2018-05-01

The article deals with phase relations in the KFeS2-Fe-S system studied by the dry synthesis method in the range of 300-600 °C and at a pressure of 1 bar. At the temperature below 513 ± 3 °C, pyrite coexists with rasvumite and there are pyrite-rasvumite-KFeS2 and pyrite-rasvumite-pyrrhotite equilibria established. Above 513 ± 3 °C pyrite and rasvumite react to form KFeS2 and pyrrhotite, limiting the pyrite-rasvumite association to temperatures below this in nature. The experiments also outline the compositional stability range of the copper-free analog of murunskite (K x Fe2- y S2) and suggest that mineral called bartonite is not stable in the Cl-free system, at least at atmospheric pressure and the temperature in the experiments. Chlorbartonite could be easily produced after adding KCl in the experiment. Possible parageneses in the quaternary K-Fe-S-Cl system were described based on the data obtained in this research and found in the previous studies. The factors affecting the formation of potassium-iron sulfides in nature were discussed.

INFLUENCE OF ELEMENTAL SULFUR AND/OR INOCULATION WITH SULFUR OXIDIZING BACTERIA ON GROWTH, AND NUTRIENT CONTENT OF SORGHUM PLANTS GROWN ON DIFFERENT SOILS

Directory of Open Access Journals (Sweden)

Hala Kandil

2011-12-01

Full Text Available A pot experiment was conducted to study the effect of elemental sulfur(E.S rates (300 and 600 ppm and/or sulfur oxidizing bacteria (S.O.B. ATCC 8158 on growth and nutrients content of sorghum plants grown on different soils (sandy soils(I & II and clay loam soil.The obtained results could be summarized in the followings:Sorghum plants:Significant increases over the control were observed in fresh and dry weights of sorghum plant as well as its content of SO4=, N, P, K, Fe, Mn, Zn and Cu by using all the sulfur and/or the oxidizing bacteria treatments. Addition of E.S (300 & 600 ppm in combination with S.O.B. ATCC 8158 significantly increased both fresh and dry weights as well as SO4=, N, P, K, Fe, Mn, Zn and Cu contents of sorghum plants grown on the used soils as compared with either of them alone.E.S rates (300 & 600 ppm significantly increased the fresh and dry weights as well as all the studied nutrients content (SO4=, N, P, K, Fe, Mn, Zn and Cu of sorghum plants grown on the different soils as compared with S.O.B. ATCC 8158 treatment alone. The highest rate of E.S (600 ppm significantly increased all the previous parameters under study as compared with the lower rate (300 ppm. The highest values of fresh and dry weights as well as nutrients content (SO4=, N, P, K, Fe, Mn, Zn and Cu of sorghum plants grown on the used soils were obtained by 600 ppm E.S + S.O.B. ATCC 8158 treatment followed by 600 ppm E.S; 300 ppm E.S + S.O.B. ATCC 8158; 300 ppm E.S; S.O.B. ATCC 8158 and control treatments in decreasing order.The used soils:E.S rates (300 & 600 ppm and/or S.O.B. ATCC 8158 decreased pH values of the used soils after 3, 6 and 9 weeks from sowing as compared with their corresponding control treatments. The values of pH of sand soil (I and clay loam soil slightly decreased by time i.e they decreased from 3 weeks to 9 weeks from plantation. E.S rates (300 & 600 ppm with or without inoculation the used soils with S.O.B. ATCC 8158 significantly

Modeling of grain boundary stresses in Alloy 600

Energy Technology Data Exchange (ETDEWEB)

Kozaczek, K.J. [Oak Ridge National Lab., TN (United States); Sinharoy, A.; Ruud, C.O. [Pennsylvania State Univ., University Park, PA (United States); Mcllree, A.R. [Electric Power Research Inst., Palo Alto, CA (United States)

1995-04-01

Corrosive environments combined with high stress levels and susceptible microstructures can cause intergranular stress corrosion cracking (IGSCC) of Alloy 600 components on both primary and secondary sides of pressurized water reactors. One factor affecting the IGSCC is intergranular carbide precipitation controlled by heat treatment of Alloy 600. This study is concerned with analysis of elastic stress fields in vicinity of M{sub 7}C{sub 3} and M{sub 23}C{sub 6} carbides precipitated in the matrix and at a grain boundary triple point. The local stress concentration which can lead to IGSCC initiation was studied using a two-dimensional finite element model. The intergranular precipitates are more effective stress raisers than the intragranular precipitates. The combination of the elastic property mismatch and the precipitate shape can result in a local stress field substantially different than the macroscopic stress. The maximum local stresses in the vicinity of the intergranular precipitate were almost twice as high as the applied stress.

Continuous Lake-Sediment Records of Glaciation in the Sierra Nevada between 52,600 and 12,500 14C yr B.P

Science.gov (United States)

Benson, Larry V.; May, Howard M.; Antweiler, Ronald C.; Brinton, Terry I.; Kashgarian, Michaele; Smoot, Joseph P.; Lund, Steve P.

1998-09-01

The chemistry of the carbonate-free clay-size fraction of Owens Lake sediments supports the use of total organic carbon and magnetic susceptibility as indicators of stadial-interstadial oscillations. Owens Lake records of total organic carbon, magnetic susceptibility, and chemical composition of the carbonate-free, clay-size fraction indicate that Tioga glaciation began ˜24,500 and ended by ˜13,600 14C yr B.P. Many of the components of glacial rock flour (e.g., TiO 2, MnO, BaO) found in Owens Lake sediments achieved maximum values during the Tioga glaciation when valley glaciers reached their greatest extent. Total organic carbon and SiO 2(amorphous) concentrations reached minimum values during Tioga glaciation, resulting from decreases in productivity that accompanied the introduction of rock flour into the surface waters of Owens Lake. At least 20 stadial-interstadial oscillations occurred in the Sierra Nevada between 52,600 and 14,000 14C yr B.P. Total organic carbon data from a Pyramid Lake sediment core also indicate oscillations in glacier activity between >39,500 and ˜13,600 14C yr B.P. Alpine glacier oscillations occurred on a frequency of ≤1900 yr in both basins, suggesting that millennial-scale oscillations occurred in California and Nevada during most of the past 52,600 yr.

50 CFR 600.1012 - Reduction loan.

Science.gov (United States)

2010-10-01

... annual rate, that shall be determined by subsequent events, of simple interest on the reduction loan's... deposit and disburse the fee revenue in accordance with § 600.1014. (b) Principal amount, interest rate... § 600.1014. (c) Effect of prospective interest rate. Any difference between a prospective interest rate...

Space imaging of a 300 years old cooling magma chamber: Timanfaya volcano (Lanzarote, Canary Islands)

Science.gov (United States)

Gonzalez, P. J.; Tiampo, K. F.

2010-12-01

Multitemporal space radar interferometry analysis between 1992 and 2000 revealed significantly deforming areas with a magnitude of 4-6 mm/yr of lengthening in the radar line of sight at Timanfaya volcano (Lanzarote, Canary Island). Timanfaya volcano erupted almost 300 years ago (1730-1736), along a 15 km-long fissure-feeding magmatic system, resulting in the longest and largest historical eruption of the Canarian archipelago to date, with >1 km3 of erupted basaltic lavas covering 200 km2. High surficial temperature (600 degrees-C at 13 m) and high heat flux measurements (150 mW/m2) suggest that the remnants of the magmatic chamber that fed the 1730-1736 are still partly molten. Here, we present preliminary models of the subsidence taking into account all available data, including geophysical data (heat flux, seismic, magnetotelluric and gravity), the geochemistry of freshly erupted lavas, upper mantle and crustal xenoliths, and structural geology.

Comparative Study of SSVEP- and P300-Based Models for the Telepresence Control of Humanoid Robots.

Directory of Open Access Journals (Sweden)

Jing Zhao

Full Text Available In this paper, we evaluate the control performance of SSVEP (steady-state visual evoked potential- and P300-based models using Cerebot-a mind-controlled humanoid robot platform. Seven subjects with diverse experience participated in experiments concerning the open-loop and closed-loop control of a humanoid robot via brain signals. The visual stimuli of both the SSVEP- and P300- based models were implemented on a LCD computer monitor with a refresh frequency of 60 Hz. Considering the operation safety, we set the classification accuracy of a model over 90.0% as the most important mandatory for the telepresence control of the humanoid robot. The open-loop experiments demonstrated that the SSVEP model with at most four stimulus targets achieved the average accurate rate about 90%, whereas the P300 model with the six or more stimulus targets under five repetitions per trial was able to achieve the accurate rates over 90.0%. Therefore, the four SSVEP stimuli were used to control four types of robot behavior; while the six P300 stimuli were chosen to control six types of robot behavior. Both of the 4-class SSVEP and 6-class P300 models achieved the average success rates of 90.3% and 91.3%, the average response times of 3.65 s and 6.6 s, and the average information transfer rates (ITR of 24.7 bits/min 18.8 bits/min, respectively. The closed-loop experiments addressed the telepresence control of the robot; the objective was to cause the robot to walk along a white lane marked in an office environment using live video feedback. Comparative studies reveal that the SSVEP model yielded faster response to the subject's mental activity with less reliance on channel selection, whereas the P300 model was found to be suitable for more classifiable targets and required less training. To conclude, we discuss the existing SSVEP and P300 models for the control of humanoid robots, including the models proposed in this paper.

Steps to Advanced CANDU 600

International Nuclear Information System (INIS)

Oh, Yongshick; Brooks, G. L.

1988-01-01

The CANDU nuclear power system was developed from merging of AECL heavy water reactor technology with Ontario Hydro electrical power station expertise. The original four units of Ontario Hydro's Pickering Generating Station are the first full-scale commercial application of the CANDU system. AECL and Ontario Hydro then moved to the next evolutionary step, a more advanced larger scale design for four units at the Bruce Generating Station. CANDU 600 followed as a single unit nuclear electric power station design derived from an amalgam of features of the multiple unit Pickering and Bruce designs. The design of the CANDU 600 nuclear steam supply system is based on the Pickering design with improvements derived from the Bruce design. For example, most CANDU 600 auxiliary systems are based on Bruce systems, whereas the fuel handling system is based on the Pickering system. Four CANDU 600 units are in operation, and five are under construction in Romania. For the additional four units at Pickering Generating Station 'B', Ontario Hydro selected a replica of the Pickering 'A' design with limited design changes to maintain a high level of standardization across all eight units. Ontario Hydro applied a similar policy for the additional four units at Bruce Generating Station 'B'. For the four unit Darlington station, Ontario Hydro selected a design based on Bruce with improvements derived from operating experience, the CANDU 600 design and development programs

Magnetic and crystallographic properties of TbCo4B

International Nuclear Information System (INIS)

Caspi, E.N.; Dubman, M.; Ettedgui, H.; Shaked, H.; Melamud, M.; Keller, L.; Avdeev, M.

2006-01-01

The compound TbCo 4 B was studied using measurements of AC magnetic susceptibility, magnetization and neutron powder diffraction. It is found that this compound orders at T C ∼450 K. Each of the two Tb and two Co sublattices orders ferromagnetically. The coupling is ferromagnetic within each pair and ferrimagnetic between pairs. A compensation point at ∼300 K and a spin reorientation between 400 and 430 K were found

Effect of the Total Extract of Averrhoacarambola (Oxalidaceae Root on the Expression Levels of TLR4 and NF-κB in Streptozotocin-Induced Diabetic Mice

Directory of Open Access Journals (Sweden)

Xiaohui Xu

2015-07-01

Full Text Available Background: Averrhoacarambola L., which is a folk medicine used in diabetes mellitus (DM in ancient China, has been reported to have anti-diabetic efficacy. Aims: The aim of this study was to evaluate the hypoglycemic effect of the extract of Averrhoacarambola L. root (EACR on the regulation of the Toll-like receptor 4 (TLR4-Nuclear-factor kappa B (NF-κB pathway in B pathway in streptozotocin (STZ-induced diabetic mice. Methods: the mice were injected with STZ (120 mg/kg body weight via a tail vein. After 72 h, the mice with FBG = 11.1 mmol/L were confirmed as having diabetes. Subsequently, the mice were treated intragastrically with EACR (300, 600, 1200 mg/kg body weight/d and metformin (320 mg/kg body weight/d for 14 days. Results: As a result the serum fasting blood glucose (FBG, interleukin-6 (IL-6 and tumor necrosis factor-a (TNF-a levels were decreased following EACR administration. Immunohistochemical analysis revealed that the pancreatic tissue expression levels of TLR4 and NF-κB were downregulated after EACR administration. EACR suppressed pancreatic mRNA expression level of TLR4 and blocked the downstream NF-κB pathway in the pancreas. According to Western blot analysis EACR suppressed pancreatic TLR4 and NF-κB protein expression levels. Histopathological examination of the pancreas showed that STZ-induced pancreas lesions were alleviated by the EACR treatment. Conclusion: These findings suggest that the modulation of the IL-6 and TNF-a inflammatory cytokines and the suppression of the TLR4-NF-κB pathway are most likely involved in the anti-hyperglycemic effect of EACR in STZ-induced diabetic mice.

Determination of surface oxide compositions on Alloy 600 using Rutherford backscattering

International Nuclear Information System (INIS)

Hanson, A.L.; Kraner, H.W.

1984-01-01

The surface composition of oxides formed on Alloy 600 under conditions similar to those in the primary side of PWR heat exchangers has been studied as a function of potential using Rutherford backscattering and proton inelastic scattering. Electropolished samples of Alloy 600 were exposed at several potentials to a solution of 0.18M H 3 BO 3 (2000ppm B) with 0.21mM LiOH (1.5ppm Li) at 300 0 C for 450 hours. The potentials relative to an internal hydrogen electrode ranged from -.09 to 750 mV. RBS analysis showed little or no oxide formation on samples exposed at 0 mV. Above 0 mV oxide layers formed whose thicknesses increased with potential. In addition the RBS showed a significantly enhanced concentration of aluminum and silicon in oxide. Both the oxygen and the sum of the aluminum and silicon content appeared to maintain a fixed surface concentration independent of the oxide thickness. Boron and lithium concentrations were analyzed with proton inelastic scattering. No lithium was detected in any sample. The boron concentration was found to follow the thickness of the oxide

78 FR 52107 - Special Conditions: Boeing Model 777-200, -300, and -300ER Series Airplanes; Rechargeable Lithium...

Science.gov (United States)

2013-08-22

... passengers. The Model 777-200, -300, and -300ER series airplanes have fly-by-wire controls, fully software... lead acid batteries and nickel cadmium batteries. These special conditions provide an equivalent level... characteristics that differ significantly from those of the nickel cadmium and lead acid rechargeable batteries...

Development and use of a predictive model of crack propagation in 304/316L, A533B/A508 and Inconel 600/182 alloys in 2880C water

International Nuclear Information System (INIS)

Ford, F.P.; Andresen, P.L.

1988-01-01

Environmentally assisted cracking (i.e., stress corrosion cracking and corrosion fatigue) continues to present a potential safety and economic problem to both the nuclear and non-nuclear power generation industries. Efforts to develop adequate mitigation actions have been vigorous in the former industry but, of necessity, these have been based primarily on accelerated tests covering a limited fraction of the wide combination of material, environment and stressing conditions that are pertinent to the operation of light water reactors. Previous articles have stressed the potential value of combining these phenomenologically oriented studies of stress corrosion and corrosion fatigue with a mechanistically based model of environmentally assisted cracking. Quite apart from conferring some scientific assurance of the validity of the empirically derived data vis a vis plant performance, the mechanistic knowledge offers the potential of interpreting the isolated experimental data and forming a methodology for making decisions regarding life prediction and life extension. This article briefly reviews the mechanistic basis for predicting the cracking behavior of 304/316 stainless steel, A508/A533B low alloy steels and Inconel 600/182 nickel-base alloys in high temperature water, and then develops the argument for the practical use of this mechanistic knowledge in conjunction with crack monitoring and environmental sensing capabilities

The hexatron, a six-sided 4-GeV 300-μA CW microtron

International Nuclear Information System (INIS)

Colton, E.P.; Crosbie, E.A.; Foss, M.

1984-01-01

The use of microtron accelerators to provide intense CW beams of electrons with energies in the 1-5 GeV range is discussed. Principles of operation are reviewed and a design is presented for a six-sided hexagonal microtron, a Hexatron, which is capable of furnishing 300 μA of electrons in 3 extracted beams whose energies can be varied individually from injection energy to 4.0 GeV. Results of prototype studies of the hexatron sector magnets are discussed. Two configurations of beam optics, are shown to provide good beam containment. Options for operating the Hexatron at energies above 4 GeV are also discussed. (author)

10 CFR 600.152 - Financial reporting.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Financial reporting. 600.152 Section 600.152 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES Uniform Administrative... Nonprofit Organizations Post-Award Requirements § 600.152 Financial reporting. (a) The following forms or...

Hanford 300 Area Development Plan

International Nuclear Information System (INIS)

Daly, K.S.; Seiler, S.W.; Hail, J.C.

1991-09-01

The purpose of the Hanford 300 Area Development Plan (Development Plan) is to guide the physical development of the 300 Area in accordance with US Department of Energy (DOE) Order 4320.1B (DOE 1991b) by performing the following: (1) Establishing a land use plan, setting land use categories that meet the needs of existing and proposed activities; (2) Coordinating existing, 5-yr, and long-range development plans and guiding growth in accordance with those plans; (3) Establishing development guidelines to encourage cost-effective development and minimize conflicts between adjacent activities; (4) Identifying site development issues that need further analysis; Integrating program plans with development plans to ensure a logical progression of development; and, (6) Integrating DOE plans with local agency plans (i.e., city, country, state, and Tri-Cities Science and Technology Park plans)

12 CFR 308.600 - Scope.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Scope. 308.600 Section 308.600 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF PRACTICE RULES OF PRACTICE AND PROCEDURE Removal, Suspension, and Debarment of Accountants From Performing Audit Services § 308.600 Scope...

40 CFR 600.111-08 - Test procedures.

Science.gov (United States)

2010-07-01

... § 600.109(b) while sampling the exhaust gas. (viii) Sampling must begin two seconds before beginning the... convenience of the user, the revised text is set forth as follows: § 600.111-08 Test procedures. (f) Special...

Interaction of the transactivation domain of B-Myb with the TAZ2 domain of the coactivator p300: molecular features and properties of the complex.

Directory of Open Access Journals (Sweden)

Ojore Oka

Full Text Available The transcription factor B-Myb is a key regulator of the cell cycle in vertebrates, with activation of transcription involving the recognition of specific DNA target sites and the recruitment of functional partner proteins, including the coactivators p300 and CBP. Here we report the results of detailed studies of the interaction between the transactivation domain of B-Myb (B-Myb TAD and the TAZ2 domain of p300. The B-Myb TAD was characterized using circular dichroism, fluorescence and NMR spectroscopy, which revealed that the isolated domain exists as a random coil polypeptide. Pull-down and spectroscopic experiments clearly showed that the B-Myb TAD binds to p300 TAZ2 to form a moderately tight (K(d ~1.0-10 µM complex, which results in at least partial folding of the B-Myb TAD. Significant changes in NMR spectra of p300 TAZ2 suggest that the B-Myb TAD binds to a relatively large patch on the surface of the domain (~1200 Å(2. The apparent B-Myb TAD binding site on p300 TAZ2 shows striking similarity to the surface of CBP TAZ2 involved in binding to the transactivation domain of the transcription factor signal transducer and activator of transcription 1 (STAT1, which suggests that the structure of the B-Myb TAD-p300 TAZ2 complex may share many features with that reported for STAT1 TAD-p300 TAZ2.

RAMONA-4B a computer code with three-dimensional neutron kinetics for BWR and SBWR system transient - models and correlations

Energy Technology Data Exchange (ETDEWEB)

Rohatgi, U.S.; Cheng, H.S.; Khan, H.J.; Mallen, A.N.; Neymotin, L.Y.

1998-03-01

This document describes the major modifications and improvements made to the modeling of the RAMONA-3B/MOD0 code since 1981, when the code description and assessment report was completed. The new version of the code is RAMONA-4B. RAMONA-4B is a systems transient code for application to different versions of Boiling Water Reactors (BWR) such as the current BWR, the Advanced Boiling Water Reactor (ABWR), and the Simplified Boiling Water Reactor (SBWR). This code uses a three-dimensional neutron kinetics model coupled with a multichannel, non-equilibrium, drift-flux, two-phase flow formulation of the thermal hydraulics of the reactor vessel. The code is designed to analyze a wide spectrum of BWR core and system transients and instability issues. Chapter 1 is an overview of the code`s capabilities and limitations; Chapter 2 discusses the neutron kinetics modeling and the implementation of reactivity edits. Chapter 3 is an overview of the heat conduction calculations. Chapter 4 presents modifications to the thermal-hydraulics model of the vessel, recirculation loop, steam separators, boron transport, and SBWR specific components. Chapter 5 describes modeling of the plant control and safety systems. Chapter 6 presents and modeling of Balance of Plant (BOP). Chapter 7 describes the mechanistic containment model in the code. The content of this report is complementary to the RAMONA-3B code description and assessment document. 53 refs., 81 figs., 13 tabs.

Modelling and simulation of containment on full scope simulator for Qinshan 300 MW Nuclear Power Unit

International Nuclear Information System (INIS)

Zou Tingyun

1996-01-01

A multi-node containment thermal-hydraulic model has been developed and adapted in Full Scope Simulator for Qinshan 300 MW Nuclear Power Unit with good realtime simulation effects. Containment pressure for LBLOCA calculated by the model is well agreed with those of CONTEMPT-4/MOD3

A new stress corrosion cracking model for Inconel 600 in PWR media

International Nuclear Information System (INIS)

Magnin, T.

1993-01-01

A model of cracking in corrosion under stress, based on corrosion-plasticity interactions at cracking points, is proposed to describe the generally intergranular breakage of Inconel 600 in PWR medium. It is shown by calculation, and verified experimentally by observations in SEM, that a pseudo-intergranular breakage connected to the formation of micro facets in zigzags along the joints is possible, as well as a completely intergranular breakage. This allows us to assume that a continuity of mechanisms exists between the trans- and intergranular cracking by corrosion under material stress. (author)

Effects of Intermittent Altitude Exposures on Acclimatization of 4,300 M

National Research Council Canada - National Science Library

Beidleman, Beth

2001-01-01

This study examined the effects of 3 wk of intermittent exposures (4 h/d, 5 d/wk) to 4,300 m altitude-equivalent, in combination with either passive sitting or exercise training, on the process of altitude acclimatization...

Modelling of the interactions between B4C and stainless steel at high temperatures

International Nuclear Information System (INIS)

Veshchunov, M.S.

1995-01-01

Results of detailed chemical-analytical examinations of B 4 C/stainless steel (s.s.) reaction couples obtained at temperatures of 1000, 1100 and 1200 C, and a theoretical model developed on the basis of these results, which describes the reaction layers growth kinetics, are presented. The examinations were carried out by AES and XMA methods to measure concentration profiles of different elements in the various phases and the thicknesses of the formed reaction layers as function of time to determine the growth kinetics. A new approach for modelling of diffusion mass transfer through a two-phase zone in multicomponent systems is further developed for the description of the growth kinetics of the reaction layer consisting of Me 2 B (Me≡Fe, Cr, Ni) precipitates in the stainless steel matrix. Diffusion coefficients of Cr in all phases of the reaction zone are calculated. These data together with the measured boundary concentrations of the elements allow the complete description of the B 4 C/s.s. interaction kinetics at the examined test temperatures by the proposed model. (orig.)

41 CFR 300-80.4 - How many test programs may be authorized by GSA throughout the government?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false How many test programs may be authorized by GSA throughout the government? 300-80.4 Section 300-80.4 Public Contracts and... TEST PROGRAMS § 300-80.4 How many test programs may be authorized by GSA throughout the government? No...

10 CFR 600.124 - Program income.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Program income. 600.124 Section 600.124 Energy DEPARTMENT... Nonprofit Organizations Post-Award Requirements § 600.124 Program income. (a) The standards set forth in this section shall be used to account for program income related to projects financed in whole or in...

50 CFR 600.740 - Enforcement policy.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Enforcement policy. 600.740 Section 600... § 600.740 Enforcement policy. (a) The Magnuson-Stevens Act provides four basic enforcement remedies for... and its catch. (4) Criminal prosecution of the owner or operator for some offenses. It shall be the...

300 Area D4 Project 4th Quarter Fiscal Year 2006 Building Completion Report

International Nuclear Information System (INIS)

D. S. Smith

2007-01-01

This report documents the deactivation, decontamination, decommissioning, and demolition (D4) of nine buildings in the 300 Area of the Hanford Site. The D4 of these facilities included characterization, engineering, removal of hazardous and radiologically contaminated materials, equipment removal, utility disconnection, deactivation, decontamination, demolition of the structure, and stabilization or removal of the remaining slab and foundation, as appropriate

46 CFR 118.600 - Fire axe.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Fire axe. 118.600 Section 118.600 Shipping COAST GUARD... OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS FIRE PROTECTION EQUIPMENT Additional Equipment § 118.600 Fire axe. A vessel of more than 19.8 meters (65 feet) in length must have at least one fire axe...

34 CFR 300.506 - Mediation.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Mediation. 300.506 Section 300.506 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.506 Mediation. (a... due process complaint, to resolve disputes through a mediation process. (b) Requirements. The...

75 FR 8551 - Airworthiness Directives; Airbus Model A300, A300-600, and A310 Airplanes

Science.gov (United States)

2010-02-25

... 2008- 0166. An updated list of suspect check valves with P/N 2S2794-1 has now been issued by Crissair... actions. (1) At the applicable compliance time specified in Table 1 of this AD: For Crissair check valves... Affected check valve installation, identified by FIN (functional item Compliance time number) (i) Airplanes...

Biblis 1,300 MW unit B in operation for thirty years

International Nuclear Information System (INIS)

Lauer, H.

2006-01-01

Over the past thirty years, unit B of the Biblis nuclear power station has contributed towards safe, reliable and non-polluting electricity generation. Unit B was the first 1,300 MW unit in the world confirming the good experience accumulated in the construction and operation of plants this size. It laid the foundation for the advanced development of nuclear power plants up to the convoy line. The good availability this plant has achieved in its operating cycles proves the mature state of technology and the high level of qualification and motivation of the power plant staff and the personnel of external firms contracted to work for Biblis. Biblis B has served as a reference plant in German nuclear safety research, demonstrating that units this size can be operated safely. Unit B is also living proof of the possibility to raise nuclear power plants built in the seventies to the current state of the art by implementing the appropriate backfitting and modernization measures. Today, Biblis B is operated at a safety level clearly higher than that to be achieved for new plants internationally. This is also evident from comparison with the guiding values for the safety of new facilities as published by the International Atomic Energy Agency (IAEA). (orig.)

300 MWe Burner Core Design with two Enrichment Zoning

International Nuclear Information System (INIS)

Song, Hoon; Kim, Sang Ji; Kim, Yeong Il

2008-01-01

KAERI has been developing the KALIMER-600 core design with a breakeven fissile conversion ratio. The core is loaded with a ternary metallic fuel (TRU-U-10Zr), and the breakeven characteristics are achieved without any blanket assembly. As an alternative plan, a KALIMER-600 burner core design has been also performed. In the early stage of the development of a fast reactor, the main purpose is an economical use of a uranium resource but nowadays in addition to the maximum utilization of a uranium resource, the burning of a high level radioactive waste is taken as an additional interest for the harmony of the environment. In way of constructing the commercial size reactor which has the power level ranging from 800 MWe to 1600 MWe, the demonstration reactor which has the power level ranging from 200 MWe to 600 MWe was usually constructed for the midterm stage to commercial size reactor. In this paper, a 300 MWe burner core design was performed with purpose of demonstration reactor for KALIMER-600 burner of 600 MWe. As a means to flatten the power distribution, instead of a single fuel enrichment scheme adapted in design of KALIMER-600 burner, the 2 enrichment zoning approach was adapted

Analysis of the AP600 core makeup tank experiments using the NOTRUMP code

International Nuclear Information System (INIS)

Cunningham, J.C.; Haberstroh, R.C.; Hochreiter, L.E.; Jaroszewicz, J.

1995-01-01

The AP600 design utilizes passive methods to perform core and containment cooling functions for a postulated loss of coolant. The core makeup tank (CMT) is an important feature of the AP600 passive safety system. The NOTRUMP code has been compared to the 300-series core makeup tank experiments. It has been observed that the code will capture the correct thermal-hydraulic behavior observed in the experiments. The correlations used for wall film condensation and convective heat transfer to the heated CMT liquid appear to be appropriate for these applications. The code will predict the rapid condensation and mixing thermal-hydraulic behavior observed in the 300-series tests. The NOTRUMP predictions can be noding-dependent since the condensation is extremely dependent on the amount of cold CMT liquid that mixes with the incoming steam flow

Qatar Exoplanet Survey : Qatar-3b, Qatar-4b, and Qatar-5b

Science.gov (United States)

Alsubai, Khalid; Mislis, Dimitris; Tsvetanov, Zlatan I.; Latham, David W.; Bieryla, Allyson; Buchhave, Lars A.; Esquerdo, Gilbert A.; Bramich, D. M.; Pyrzas, Stylianos; Vilchez, Nicolas P. E.; Mancini, Luigi; Southworth, John; Evans, Daniel F.; Henning, Thomas; Ciceri, Simona

2017-04-01

We report the discovery of Qatar-3b, Qatar-4b, and Qatar-5b, three new transiting planets identified by the Qatar Exoplanet Survey. The three planets belong to the hot Jupiter family, with orbital periods of {P}{{Q}3{{b}}} = 2.50792 days, {P}{{Q}4{{b}}} = 1.80539 days, and {P}{{Q}5{{b}}} = 2.87923 days. Follow-up spectroscopic observations reveal the masses of the planets to be {M}{{Q}3{{b}}} = 4.31 ± 0.47 {M}{{J}}, {M}{{Q}4{{b}}} = 6.10 ± 0.54 {M}{{J}}, and {M}{{Q}5{{b}}} = 4.32 ± 0.18 {M}{{J}}, while model fits to the transit light curves yield radii of {R}{{Q}3{{b}}} = 1.096 ± 0.14 {R}{{J}}, {R}{{Q}4{{b}}} = 1.135 ± 0.11 {R}{{J}}, and {R}{{Q}5{{b}}} = 1.107 ± 0.064 {R}{{J}}. The host stars are low-mass main sequence stars with masses and radii M Q3 = 1.145 ± 0.064 M ⊙, M Q4 = 0.896 ± 0.048 M ⊙, M Q5 = 1.128 ± 0.056 M ⊙ and R Q3 = 1.272 ± 0.14 R ⊙, R Q4 = 0.849 ± 0.063 R ⊙, and R Q5 = 1.076 ± 0.051 R ⊙ for Qatar-3, 4, and 5 respectively. The V magnitudes of the three host stars are V Q3 = 12.88, V Q4 = 13.60, and V Q5 = 12.82. All three new planets can be classified as heavy hot Jupiters (M > 4 M J).

Preliminary analyses of AP600 using RELAP5

International Nuclear Information System (INIS)

Modro, S.M.; Beelman, R.J.; Fisher, J.E.

1991-01-01

This paper presents results of preliminary analyses of the proposed Westinghouse Electric Corporation AP600 design. AP600 is a two loop, 600 MW (e) pressurized water reactor (PWR) arranged in a two hot leg, four cold leg nuclear steam supply system (NSSS) configuration. In contrast to the present generation of PWRs it is equipped with passive emergency core coolant (ECC) systems. Also, the containment and the safety systems of the AP600 interact with the reactor coolant system and each other in a more integral fashion than present day PWRs. The containment in this design is the ultimate heat sink for removal of decay heat to the environment. Idaho National Engineering Laboratory (INEL) has studied applicability of the RELAP5 code to AP600 safety analysis and has developed a model of the AP600 for the Nuclear Regulatory Commission. The model incorporates integral modeling of the containment, NSSS and passive safety systems. Best available preliminary design data were used. Nodalization sensitivity studies were conducted to gain experience in modeling of systems and conditions which are beyond the applicability of previously established RELAP5 modeling guidelines or experience. Exploratory analyses were then undertaken to investigate AP600 system response during postulated accident conditions. Four small break LOCA calculations and two large break LOCA calculations were conducted

Enhanced extracellular production of L-asparaginase from Bacillus subtilis 168 by B. subtilis WB600 through a combined strategy.

Science.gov (United States)

Feng, Yue; Liu, Song; Jiao, Yun; Gao, Hui; Wang, Miao; Du, Guocheng; Chen, Jian

2017-02-01

L-asparaginase (EC 3.5.1.1, ASN) exhibits great commercial value due to its uses in the food and medicine industry. In this study, we reported the enhanced expression of type II ASN from Bacillus subtilis 168 in B. subtilis WB600 through a combined strategy. First, eight signal peptides (the signal peptide of the ASN, ywbN, yvgO, amyE, oppA, vpr, lipA, and wapA) were used for ASN secretion in B. subtilis by using Hpa II promoter, respectively. The signal peptide wapA achieved the highest extracellular ASN activity (28.91 U/mL). Second, Hpa II promoter was replaced by a strong promoter, P43 promoter, resulting in 38.1 % enhanced ASN activity. By two rounds of error-prone PCR mutation, the P43 promoter variants with remarkably enhanced strength (D7, E2, H6, B2, and F3) were identified. B2 (-28: A → G, -13: A → G) achieved ASN activity up to 51.13 U/mL. Third, after deletion of the N-terminal 25-residues, ASN activity reached 102.41 U/mL, which was 100 % higher than that of the intact ASN. At last, the extracellular ASN of the B. subtilis arrived at 407.6 U/mL (2.5 g/L of ASN protein) in a 3-L bioreactor by using a fed-batch strategy. The purified ASN showed maximal activity at 65 °C and its half-life at 65 °C was 61 min. The K m and k cat of the ASN were 5.29 mM and 54.4 s -1 , respectively. To the best of our knowledge, we obtained the highest yield of ASN in a food-grade host ever reported, which may benefit the industrial production and application of ASN.

DUSP4/MKP2 overexpression is associated with BRAFV600E mutation and aggressive behavior of papillary thyroid cancer

Directory of Open Access Journals (Sweden)

Ma B

2016-04-01

Full Text Available Ben Ma,1,2,* Rongliang Shi,1–3,* Shuwen Yang,1,2 Li Zhou,1,2 Ning Qu,1,2 Tian Liao,1,2 Yu Wang,1,2 Yulong Wang,1,2 Qinghai Ji1,2 1Department of Head and Neck Surgery, Fudan University Shanghai Cancer Center, 2Department of Oncology, Shanghai Medical College, 3Department of General Surgery, Fudan University, Minhang Hospital, Shanghai, People’s Republic of China *These authors contributed equally to this work Abstract: The study was performed to retrospectively analyze the correlation of dual specificity phosphatase 4 (DUSP4 expression with clinicopathological variables and BRAFV600E mutation to better characterize the potential role of DUSP4 as a biomarker in papillary thyroid cancer (PTC. Patients (n=120 who underwent surgery for PTC at Fudan University Shanghai Cancer Center (FUSCC were enrolled in this study, and a validation cohort from The Cancer Genome Atlas (TCGA database was identified to confirm the preliminary findings in our study. We investigated DUSP4 expression at the mRNA level in PTC tissues and adjacent normal tissues using real-time quantitative reverse transcription-polymerase chain reaction (qRT-PCR. BRAFV600E mutation analysis was also performed in PTC tissues using Sanger sequencing. Initially, we compared PTC tissues with paired normal tissues in DUSP4 expression using Student’s t-test, and then analyzed the correlation of DUSP4 with clinicopathological variables and BRAFV600E mutation in PTC using Mann–Whitney U, Kruskal–Wallis, χ2, and Fisher’s exact tests. Human-derived thyroid cell lines were also used to verify our findings. DUSP4 was significantly overexpressed in PTC tissues compared with the adjacent normal tissues (P<0.001. High DUSP4 expression showed a significant association with lymph node metastasis and extrathyroidal extension in both FUSCC and TCGA cohorts, and DUSP4 overexpression was an independent risk factor for lymph node metastasis in multivariate analysis. Additionally, DUSP4 expression

10 CFR 600.244 - Termination for convenience.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Termination for convenience. 600.244 Section 600.244 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES Uniform... Requirements § 600.244 Termination for convenience. Except as provided in § 600.443 awards may be terminated in...

10 CFR 600.233 - Supplies.

Science.gov (United States)

2010-01-01

... supplies exceeding $5,000 in total aggregate fair market value upon termination or completion of the award... 10 Energy 4 2010-01-01 2010-01-01 false Supplies. 600.233 Section 600.233 Energy DEPARTMENT OF... Supplies. (a) Title. Title to supplies acquired under a grant or subgrant will vest, upon acquisition, in...

Development of Predictive Relationships for Flood Hazard Assessments in Ungaged Basins

Science.gov (United States)

2016-02-01

Bombardelli 2002). To estimate runoff in ungaged catchments, existing process-based hydrodynamic models can be applied in a distributed form to solve the...characterize precipitation , elevation, soil type, and land use. PRECIPITATION : The Tropical Rainfall Measuring Mission (TRMM) Version 7 was the source...b) (c) Precipitation (mm/day) 10 - 250 - 10 25 - 50 50 - 100 100 - 200 200 - 300 300 - 400 400 - 500 500 - 600 600 - 750 750 - 1,000

24 CFR 1003.600 - Faith-based activities.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Faith-based activities. 1003.600 Section 1003.600 Housing and Urban Development Regulations Relating to Housing and Urban Development... Requirements § 1003.600 Faith-based activities. (a) Religious organizations are eligible, on the same basis as...

10 CFR 600.324 - Supplies.

Science.gov (United States)

2010-01-01

... unused supplies. If the inventory of unused supplies exceeds $5,000 in total aggregate value and the... 10 Energy 4 2010-01-01 2010-01-01 false Supplies. 600.324 Section 600.324 Energy DEPARTMENT OF... Supplies. (a) Title vests in the recipient upon acquisition of supplies acquired with Federal funds under...

Cavitation problems in mixing devices of SNR-300 fuel elements

International Nuclear Information System (INIS)

Benemann, A.

1976-01-01

Because of a complex flow path within the mixing device developed for the fuel elements of the SNR-300, in order to determine the minimum allowable interval to the beginning of cavitation, experimental tests with the original geometry are necessary. These conclusions show that for cavitation values CV>=1,3 - in the model and prototype - no cavitation zones can form. For reactor conditions a maximum velocity of Vsub(max)=4,7m/sec is therefore allowable in the free annular space of the compensator unit which corresponds to a massflow of M=22,5kg/sec. A cavitation value of CV=1,5 can be figured for the 120% load factor (M=20,4kg/sec,T=560 0 C). The mixing device developed is free of cavitation under the present conditions in the SNR-300. The condition of the fully developed cavitation is evidenced by a white noise with frequencies of at least 2.000 - 300.000cps and a signal/noise ratio S/R>40dB. The pressure amplitudes dependent on frequency are propagated in the streaming fluid and are severely damped by the locally existing two-phase flow. The unstable range at the beginning of cavitation is characterized by frequencies of about f=15.000cps

Genomic and transcriptomic differences in community acquired methicillin resistant Staphylococcus aureus USA300 and USA400 strains.

Science.gov (United States)

Jones, Marcus B; Montgomery, Christopher P; Boyle-Vavra, Susan; Shatzkes, Kenneth; Maybank, Rosslyn; Frank, Bryan C; Peterson, Scott N; Daum, Robert S

2014-12-19

Staphylococcus aureus is a human pathogen responsible for substantial morbidity and mortality through its ability to cause a number of human infections including bacteremia, pneumonia and soft tissue infections. Of great concern is the emergence and dissemination of methicillin-resistant Staphylococcus aureus strains (MRSA) that are resistant to nearly all β-lactams. The emergence of the USA300 MRSA genetic background among community associated S. aureus infections (CA-MRSA) in the USA was followed by the disappearance of USA400 CA-MRSA isolates. To gain a greater understanding of the potential fitness advantages and virulence capacity of S. aureus USA300 clones, we performed whole genome sequencing of 15 USA300 and 4 USA400 clinical isolates. A comparison of representative genomes of the USA300 and USA400 pulsotypes indicates a number of differences in mobile genome elements. We examined the in vitro gene expression profiles by microarray hybridization and the in vivo transcriptomes during lung infection in mice of a USA300 and a USA400 MRSA strain by performing complete genome qRT-PCR analysis. The unique presence and increased expression of 6 exotoxins in USA300 (12- to 600-fold) compared to USA400 may contribute to the increased virulence of USA300 clones. Importantly, we also observed the up-regulation of prophage genes in USA300 (compared with USA400) during mouse lung infection (including genes encoded by both prophages ΦSa2usa and ΦSa3usa), suggesting that these prophages may play an important role in vivo by contributing to the elevated virulence characteristic of the USA300 clone. We observed differences in the genetic content of USA300 and USA400 strains, as well as significant differences of in vitro and in vivo gene expression of mobile elements in a lung pneumonia model. This is the first study to document the global transcription differences between USA300 and USA400 strains during both in vitro and in vivo growth.

Design-reliability assurance program application to ACP600

International Nuclear Information System (INIS)

Zhichao, Huang; Bo, Zhao

2012-01-01

ACP600 is a newly nuclear power plant technology made by CNNC in China and it is based on the Generation III NPPs design experience and general safety goals. The ACP600 Design Reliability Assurance Program (D-RAP) is implemented as an integral part of the ACP600 design process. A RAP is a formal management system which assures the collection of important characteristic information about plant performance throughout each phase of its life and directs the use of this information in the implementation of analytical and management process which are specifically designed to meet two specific objects: confirm the plant goals and cost effective improvements. In general, typical reliability assurance program have 4 broad functional elements: 1) Goals and performance criteria; 2) Management system and implementing procedures; 3) Analytical tools and investigative methods; and 4) Information management. In this paper we will use the D-RAP technical and Risk-Informed requirements, and establish the RAM and PSA model to optimize the ACP600 design. Compared with previous design process, the D-RAP is more competent for the higher design targets and requirements, enjoying more creativity through an easier implementation of technical breakthroughs. By using D-RAP, the plants goals, system goals, performance criteria and safety criteria can be easier to realize, and the design can be optimized and more rational

Histatin 5 binds to Porphyromonas gingivalis hemagglutinin B (HagB) and alters HagB-induced chemokine responses

Science.gov (United States)

Borgwardt, Derek S.; Martin, Aaron D.; van Hemert, Jonathan R.; Yang, Jianyi; Fischer, Carol L.; Recker, Erica N.; Nair, Prashant R.; Vidva, Robinson; Chandrashekaraiah, Shwetha; Progulske-Fox, Ann; Drake, David; Cavanaugh, Joseph E.; Vali, Shireen; Zhang, Yang; Brogden, Kim A.

2014-01-01

Histatins are human salivary gland peptides with anti-microbial and anti-inflammatory activities. In this study, we hypothesized that histatin 5 binds to Porphyromonas gingivalis hemagglutinin B (HagB) and attenuates HagB-induced chemokine responses in human myeloid dendritic cells. Histatin 5 bound to immobilized HagB in a surface plasmon resonance (SPR) spectroscopy-based biosensor system. SPR spectroscopy kinetic and equilibrium analyses, protein microarray studies, and I-TASSER structural modeling studies all demonstrated two histatin 5 binding sites on HagB. One site had a stronger affinity with a KD1 of 1.9 μM and one site had a weaker affinity with a KD2 of 60.0 μM. Binding has biological implications and predictive modeling studies and exposure of dendritic cells both demonstrated that 20.0 μM histatin 5 attenuated (p < 0.05) 0.02 μM HagB-induced CCL3/MIP-1α, CCL4/MIP-1β, and TNFα responses. Thus histatin 5 is capable of attenuating chemokine responses, which may help control oral inflammation.

50 CFR 600.910 - Definitions and word usage.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Definitions and word usage. 600.910..., Consultation, and Recommendations § 600.910 Definitions and word usage. (a) Definitions. In addition to the... undertaken by a state agency. (b) Word usage. The terms “must”, “shall”, “should”, “may”, “may not”, “will...

17 CFR Appendix B to Part 190 - Special Bankruptcy Distributions

Science.gov (United States)

2010-04-01

... Conversion rate Claim in U.S. dollars A $50 1.0 $50 B €50 1.0 50 C €50 1.0 50 D £300 1.5 450 Total 600.00... Conversion rate Assets in U.S. dollars Shortfall due to sovereign action percentage Actual shortfall due to... Note: Conversion Rates: €1=$1. Reduction in Claims for General Shortfall There is a shortfall in the...

Polarimetry of 600 pulsars from observations at 1.4 GHz with the Parkes radio telescope

Science.gov (United States)

Johnston, Simon; Kerr, Matthew

2018-03-01

Over the past 13 yr, the Parkes radio telescope has observed a large number of pulsars using digital filter bank backends with high time and frequency resolution and the capability for Stokes recording. Here, we use archival data to present polarimetry data at an observing frequency of 1.4 GHz for 600 pulsars with spin-periods ranging from 0.036 to 8.5 s. We comment briefly on some of the statistical implications from the data and highlight the differences between pulsars with high and low spin-down energy. The data set, images and table of properties for all 600 pulsars are made available in a public data archive maintained by the CSIRO.

34 CFR 300.516 - Civil action.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Civil action. 300.516 Section 300.516 Education... DISABILITIES Procedural Safeguards Due Process Procedures for Parents and Children § 300.516 Civil action. (a... aggrieved by the findings and decision under § 300.514(b), has the right to bring a civil action with...

12 CFR 411.600 - Semi-annual compilation.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Semi-annual compilation. 411.600 Section 411.600 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES NEW RESTRICTIONS ON LOBBYING Agency Reports § 411.600 Semi-annual compilation. (a) The head of each agency shall collect and compile the...

The 600 MeV Saclay electron linac: 40000 hour operation

International Nuclear Information System (INIS)

Netter, F.

1977-01-01

After 40000 hours of operation, the 600 MeV Saclay's electron linac (ALS) does appear as an efficient and versatile tool, for high resolution work (20 μA in ΔE = 40 keV at E = 200MeV), for high power pion production (300 μA in 20 μs pulses at 1000 Hz and 400 MeV or 240 μA in 4 μs pulses at 3000 Hz and 390 MeV), for highly reliable positron beams acceleration, a.s.o. Main improvements made in the recent years are described in particular the automatic beam switching between any two ways among the beam handling system; and the computer newly installed in the control room with a powerful visual display allowing an easy and flexible dialogue of the operators with the computer [fr

X-ray photoelectron spectroscopy study of Schottky barrier formation and thermal stability of the LaB6/GaAs(001) c (4 x 4) interface

International Nuclear Information System (INIS)

Yokotsuka, T.; Narusawa, T.; Uchida, Y.; Nakashima, H.

1987-01-01

Schottky barrier formation and thermal stability of the LaB 6 /GaAs(001) c (4 x 4) interface were investigated by x-ray photoelectron spectroscopy. Results show an excellent thermal stability without any appreciable interface reactions such as interdiffusion. Band bending induced by LaB 6 deposition is found to depend on the evaporation condition. However, the Fermi level pinning position does not change due to heat treatments between 300 and 700 0 C. This indicates that LaB 6 is a promising gate material for GaAs integrated circuits

50 CFR 600.810 - Definitions and word usage.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Definitions and word usage. 600.810...) § 600.810 Definitions and word usage. (a) Definitions. In addition to the definitions in the Magnuson...-Stevens Act. (b) Word usage. The terms “must”, “shall”, “should”, “may”, “may not”, “will”, “could”, and...

Magnetoresistance of samarium in the 4.2-300 K range

International Nuclear Information System (INIS)

Trubitsyn, V.A.; Shalashov, V.F.

1980-01-01

Electric conductivity, transverse and longitudinal magnetoresistance of polycrystalline samarium with the purity of 99.9% in the 4.2-300 K temperature range and in magnetic fields up to 50 ke, are measured. The constituent of specific electric conductivity caused by spin disorder is 30.7 μOhmxcm, m*/m=2.6, the exchange parameter is G=3.1 eVxA 3 . Both transverse and longitudinal magnetoresistance are positive at 4.2 K; and the increase of temperature reveals a number of anomalies, evidently conditioned by the alteration of samarium magnetic structure

10 CFR 600.241 - Financial reporting.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Financial reporting. 600.241 Section 600.241 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES Uniform Administrative....241 Financial reporting. (a) General. (1) Except as provided in paragraphs (a) (2) and (5) of this...

Use of a Green Familiar Faces Paradigm Improves P300-Speller Brain-Computer Interface Performance.

Science.gov (United States)

Li, Qi; Liu, Shuai; Li, Jian; Bai, Ou

2015-01-01

A recent study showed improved performance of the P300-speller when the flashing row or column was overlaid with translucent pictures of familiar faces (FF spelling paradigm). However, the performance of the P300-speller is not yet satisfactory due to its low classification accuracy and information transfer rate. To investigate whether P300-speller performance is further improved when the chromatic property and the FF spelling paradigm are combined. We proposed a new spelling paradigm in which the flashing row or column is overlaid with translucent green pictures of familiar faces (GFF spelling paradigm). We analyzed the ERP waveforms elicited by the FF and proposed GFF spelling paradigms and compared P300-speller performance between the two paradigms. Significant differences in the amplitudes of four ERP components (N170, VPP, P300, and P600f) were observed between both spelling paradigms. Compared to the FF spelling paradigm, the GFF spelling paradigm elicited ERP waveforms of higher amplitudes and resulted in improved P300-speller performance. Combining the chromatic property (green color) and the FF spelling paradigm led to better classification accuracy and an increased information transfer rate. These findings demonstrate a promising new approach for improving the performance of the P300-speller.

Al-Si/B{sub 4}C composite coatings on Al-Si substrate by plasma spray technique

Energy Technology Data Exchange (ETDEWEB)

Sarikaya, Ozkan [Sakarya University, Faculty of Engineering, Department of Mechanical Engineering, Esentepe Campus, Sakarya 54187 (Turkey); Anik, Selahaddin [Sakarya University, Faculty of Engineering, Department of Mechanical Engineering, Esentepe Campus, Sakarya 54187 (Turkey); Aslanlar, Salim [Sakarya University, Faculty of Technical Education, Department of Mechanical Engineering, Esentepe Campus, Sakarya 54187 (Turkey); Cem Okumus, S. [Sakarya University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, Esentepe Campus, Sakarya 54187 (Turkey); Celik, Erdal [Dokuz Eylul University, Engineering Faculty, Department of Metallurgical and Materials Engineering, Buca, Izmir 35160 (Turkey)]. E-mail: erdal.celik@deu.edu.tr

2007-07-01

Plasma-sprayed coatings of Al-Si/B{sub 4}C have been prepared on Al-Si piston alloys for diesel engine motors. The Al-Si/B{sub 4}C composite powders including 5-25 wt% B{sub 4}C were prepared by mixing and ball-milling processes. These powders were deposited on Al-Si substrate using an atmospheric plasma spray technique. The coatings have been characterised with respect to phase composition, microstructure, microhardness, bond strength and thermal expansion. It was found that Al, Si, B{sub 4}C and Al{sub 2}O{sub 3} phases were determined in the coatings with approximately 600 {mu}m thick by using X-ray diffraction analysis. Scanning electron microscope observation revealed that boron carbide particles were uniformly distributed in composite coatings and B{sub 4}C particles were fully wetted by Al-Si alloy. Also, no reaction products were observed in Al-Si/B{sub 4}C composite coatings. It was found that surface roughness, porosity, bond strength and thermal expansion coefficient of composite coatings decreased with increasing fraction of the boron carbide particle. It was demonstrated that the higher the B{sub 4}C content, the higher the hardness of coatings because the hardness of B{sub 4}C is higher than that of Al-Si.

10 CFR 600.500 - Purpose and scope.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Purpose and scope. 600.500 Section 600.500 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES Eligibility Determination for Certain Financial Assistance Programs-General Statement of Policy § 600.500 Purpose and scope...

Changes of cell growth and magnetosome biomineralization in Magnetospirillum magneticum AMB-1 after ultraviolet-B irradiation

Directory of Open Access Journals (Sweden)

Yinzhao eWang

2013-12-01

Full Text Available Effects of ultraviolet radiation on microorganisms are of great interest in field of microbiology and planetary sciences. In the present study, we used Magnetospirillum magneticum AMB-1 as a model organism to examine the influence of ultraviolet-B (UV-B radiation on cell growth and magnetite biomineralization of magnetotactic bacteria. Live AMB-1 cells were exposed to UV-B radiation for 60 s, 300 s and 900 s, which correspond to radiation doses of 120 J/m2, 600 J/m2 and 1800 J/m2, respectively. After irradiation, the amounts of cyclobutane pyrimidine dimers and reactive oxygen species of the cells were increased, and cell growth was stunted up to ~170 h, depending on the UV-B radiation doses. The UV-B irradiated cells also produced on average more magnetite crystals with larger grain sizes and longer chains, which results in changes of their magnetic properties.

A 600kV 15mA Cockcroft-Walton high-voltage power supply with high stability and low-ripple voltage

International Nuclear Information System (INIS)

Su Tongling; Zhang Yimin; Chen Shangwen; Liu Yantong; Lv Huiyi; Liu Jiangtao

2006-01-01

A Cockcroft-Walton high-voltage power supply with high stability and low-ripple voltage has been developed. This power supply has been operated in a ns pulse neutron generator. The maximum non-load voltage is 600kV while the working voltage and load current are 550kV and 15mA, respectively. The tested results indicate that when the power supply is operated at 300kV, 6.7mA and the input voltage varies +/-10%, the long-term stability of the output voltage is S=(0.300-1.006)x10 -3 . The ripple voltage is δU P-P =6.2V at 300kV, 6.8-8.3mA and the ratio of δU P-P to the output voltage V H is δU P-P /V H =2.1x10 -5

B2B Models for DoD Acquisition

Science.gov (United States)

2007-07-30

product design, demand forecasting, asset management, and sales and marketing plans 35 Proctor & Gamble’s Private Industrial Network SOURCE: Laudon... B2B Models for DoD Acquisition 30 July 2007 by Magdi N. Kamel, Associate Professor Graduate School of Operational & Information Sciences...number. 1. REPORT DATE 30 JUL 2007 2. REPORT TYPE 3. DATES COVERED 00-00-2007 to 00-00-2007 4. TITLE AND SUBTITLE B2B Models for DoD

Ag{sub 3}PO{sub 4} nanocrystals deposited on monoclinic olive-like BiVO{sub 4} with efficient photodegradation of organic dyes under visible light irradiation

Energy Technology Data Exchange (ETDEWEB)

Chen, Jingshuai, E-mail: chen-jshuai@ahu.edu.cn; Jiang, Liang-Liang; Liu, Xing-Pei; Mao, Chang-Jie, E-mail: maochangjie@sina.com; Song, Ji-Ming; Niu, Helin; Zhang, Shengyi [Anhui University, School of Chemistry and Chemical Engineering (China)

2017-05-15

Olive-like BiVO{sub 4} microstructures with lengths of 600–1000 nm and widths of 300–600 nm have been synthesized via a facile and additive-free solvothermal method. Studies find that the type of solvent plays an important role in the morphology of the final products. Furthermore, Ag{sub 3}PO{sub 4} nanocrystals are successfully deposited on monoclinic olive-like BiVO{sub 4} via in situ precipitation method. The as-synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), photoluminescence (PL) spectra, and UV–vis diffuse reflectance spectra (DRS). The photocatalytic activities of the catalysts are evaluated by degradation of rhodamine B (RhB) and methylene blue (MB) under visible light (≥420 nm) irradiation. The experimental results suggest that catalytic activity of the composite photocatalysts is greatly influenced by the loading level of Ag{sub 3}PO{sub 4}. The molar ratio of 0.8:1.0 Ag{sub 3}PO{sub 4}-loaded BiVO{sub 4} exhibits higher photocatalytic activity in both the decolorization of RhB and MB than that of individual BiVO{sub 4} and P25. The observed improvement in photocatalytic activity is associated with the extended absorption in the visible light region resulting from the Ag{sub 3}PO{sub 4} nanoparticles, and the effective separation of photogenerated carriers at the Ag{sub 3}PO{sub 4}/BiVO{sub 4} interfaces through the formation of heterojunction structure. The study provides a general and effective method in the fabrication of composite with sound heterojunctions that may show a variety of applications.

Põhivõrgu investeerimisplaan ületas inspektsiooni otsust 300 mln krooniga / Andris Feldmanis

Index Scriptorium Estoniae

Feldmanis, Andris, 1982-

2004-01-01

Energiaturu inspektsioon nõustus OÜ Põhivõrk poolt kavandatud 600 miljoni kroonise investeerimisplaani asemel poole väiksema summaga. Ettevõte hindab seadusega sätestatud nõuete täitmist 300 miljoni krooniga ebareaalseks

40 CFR 600.316-78 - Multistage manufacture.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Multistage manufacture. 600.316-78 Section 600.316-78 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY... and Later Model Year Automobiles-Labeling § 600.316-78 Multistage manufacture. Where more than one...

50 CFR 300.104 - Scientific research.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Scientific research. 300.104 Section 300... REGULATIONS Antarctic Marine Living Resources § 300.104 Scientific research. (a) The management measures... vessel for research purposes, unless otherwise indicated. (b) Catches taken by any vessel for research...

Pressure effect on structural, elastic, and thermodynamic properties of tetragonal B4C4

Directory of Open Access Journals (Sweden)

Baobing Zheng

2015-03-01

Full Text Available The compressibility, elastic anisotropy, and thermodynamic properties of the recently proposed tetragonal B4C4 (t-B4C4 are investigated under high temperature and high pressure by using of first-principles calculations method. The elastic constants, bulk modulus, shear modulus, Young’s modulus, Vickers hardness, Pugh’s modulus ratio, and Poisson’s ratio for t-B4C4 under various pressures are systematically explored, the obtained results indicate that t-B4C4 is a stiffer material. The elastic anisotropies of t-B4C4 are discussed in detail under pressure from 0 GPa to 100 GPa. The thermodynamic properties of t-B4C4, such as Debye temperature, heat capacity, and thermal expansion coefficient are investigated by the quasi-harmonic Debye model.

BRAFV600 mutations in solid tumors, other than metastatic melanoma and papillary thyroid cancer, or multiple myeloma: a screening study

Directory of Open Access Journals (Sweden)

Cohn AL

2017-02-01

Full Text Available Allen L Cohn,1 Bann-Mo Day,2 Sarang Abhyankar,3 Edward McKenna,2 Todd Riehl,4 Igor Puzanov5 1Medical Research, Rocky Mountain Cancer Centers, Denver, CO, 2US Medical Affairs, 3Global Safety and Risk Management, 4Product Development Oncology, Genentech, Inc., South San Francisco, CA, 5Melanoma Section, Division of Hematology-Oncology, Department of Medicine, Vanderbilt University Medical Center, Nashville, TN, USA Background: Mutations in the BRAF gene have been implicated in several human cancers. The objective of this screening study was to identify patients with solid tumors (other than metastatic melanoma or papillary thyroid cancer or multiple myeloma harboring activating BRAFV600 mutations for enrollment in a vemurafenib clinical study.Methods: Formalin-fixed, paraffin-embedded tumor samples were collected and sent to a central laboratory to identify activating BRAFV600 mutations by bidirectional direct Sanger sequencing.Results: Overall incidence of BRAFV600E mutation in evaluable patients (n=548 was 3% (95% confidence interval [CI], 1.7–4.7: 11% in colorectal tumors (n=75, 6% in biliary tract tumors (n=16, 3% in non-small cell lung cancers (n=71, 2% in other types of solid tumors (n=180, and 3% in multiple myeloma (n=31. There were no BRAFV600 mutations in this cohort of patients with ovarian tumors (n=68, breast cancer (n=86, or prostate cancer (n=21.Conclusion: This multicenter, national screening study confirms previously reported incidences of BRAFV600 mutations from single-center studies. Patients identified with BRAFV600 mutations were potentially eligible for enrollment in the VE-BASKET study. Keywords: genetic testing, proto-oncogene proteins B-raf, PLX4032

A microwave paraphoton and axion detection experiment with 300 dB electromagnetic shielding at 3 GHz

CERN Document Server

Betz, M

2012-01-01

For the microwave equivalent of “light shining through the wall” (LSW) experiments, a sensitive microwave detector and very high electromagnetic shielding is required. The screening attenuation between the axion generating cavity and the nearby detection cavity should be greater than 300 dB, in order to improve over presently existing exclusion limits. To achieve these goals in practice, a “box in a box” concept was utilized for shielding the detection cavity, while a vector signal analyzer was used as a microwave receiver with a very narrow resolution bandwidth in the order of a few micro-Hz. This contribution will present the experimental layout and the results to date.

Thermoelastic properties of ScB2, TiB2, YB4 and HoB4

DEFF Research Database (Denmark)

Waskowska, A.; Gerward, L.; Staun Olsen, J.

2011-01-01

(4)GPa). No pressure-induced phase transformations are observed in any of the above borides up to about 20GPa. A continuous temperature-driven orthorhombic distortion is observed for HoB4 below 285K. Values of the thermal expansion coefficient are reported for ScB2 and HoB4 at 293, 200 and 100K...

10 CFR 600.314 - Program income.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Program income. 600.314 Section 600.314 Energy DEPARTMENT... Program income. (a) DOE must apply the standards in this section to the disposition of program income from... program income earned: (1) From license fees and royalties for copyrighted material, patents, patent...

10 CFR 600.225 - Program income.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Program income. 600.225 Section 600.225 Energy DEPARTMENT....225 Program income. (a) General. Grantees are encouraged to earn income to defray program costs. Program income includes income from fees for services performed, from the use or rental of real or...

KALIMER-600 Conceptual Design Report

Energy Technology Data Exchange (ETDEWEB)

Hahn, Do Hee; Kim, Yeong Il; Kim, Young Gyun (and others)

2007-02-15

This report, which summarizes the design concepts developed during Phase 4, follows the format of a safety analysis report. The purpose of publishing this report is to gather all of design information developed, so far in a systematic way, so that KALIMER-600 designers have a common and consistent source of for design information necessary for their future design and technology development activities on a SFR. Chapter 1 describes the KALIMER-600 Project. Chapter 2 includes the top-tier design requirements of KALIMER-600 and a general plant description. Chapter 3 summarizes the designs of the structures, components, equipment and systems. And the remaining chapters present the results of the design and safety analysis.

KALIMER-600 Conceptual Design Report

International Nuclear Information System (INIS)

Hahn, Do Hee; Kim, Yeong Il; Kim, Young Gyun

2007-02-01

This report, which summarizes the design concepts developed during Phase 4, follows the format of a safety analysis report. The purpose of publishing this report is to gather all of design information developed, so far in a systematic way, so that KALIMER-600 designers have a common and consistent source of for design information necessary for their future design and technology development activities on a SFR. Chapter 1 describes the KALIMER-600 Project. Chapter 2 includes the top-tier design requirements of KALIMER-600 and a general plant description. Chapter 3 summarizes the designs of the structures, components, equipment and systems. And the remaining chapters present the results of the design and safety analysis

Value of TIRADS, BSRTC and FNA-BRAF V600E mutation analysis in differentiating high-risk thyroid nodules.

Science.gov (United States)

Zhang, Yu-zhi; Xu, Ting; Cui, Dai; Li, Xiao; Yao, Qing; Gong, Hai-yan; Liu, Xiao-yun; Chen, Huan-huan; Jiang, Lin; Ye, Xin-hua; Zhang, Zhi-hong; Shen, Mei-ping; Duan, Yu; Yang, Tao; Wu, Xiao-hong

2015-11-24

The thyroid imaging reporting and data system (TIRADS) and Bethesda system for reporting thyroid cytopathology (BSRTC) have been used for interpretation of ultrasound and fine-needle aspiration cytology (FNAC) results of thyroid nodules. BRAF(V600E) mutation analysis is a molecular tool in diagnosing thyroid carcinoma. Our objective was to compare the diagnostic value of these methods in differentiating high-risk thyroid nodules. Total 220 patients with high-risk thyroid nodules were recruited in this prospective study. They all underwent ultrasound, FNAC and BRAF(V600E) mutation analysis. The sensitivity and specificity of TIRADS were 73.1% and 88.4%. BSRTC had higher specificity (97.7%) and similar sensitivity (77.6%) compared with TIRADS. The sensitivity and specificity of BRAF(V600E) mutation (85.1%, 100%) were the highest. The combination of BSRTC and BRAF(V600E) mutation analysis significantly increased the efficiency, with 97.8% sensitivity, 97.7% specificity. In patients with BSRTC I-III, the mutation rate of BRAF(V600E) was 64.5% in nodules with TIRADS 4B compared with 8.4% in nodules with TIRADS 3 or 4A (P value in differentiating high-risk thyroid nodules. The TIRADS is useful in selecting high-risk patients for FNAB and patients with BSRTC I-III for BRAF(V600E) mutation analysis.

Heat release from B4C oxidation in steam and air

International Nuclear Information System (INIS)

Belovsky, L.

1996-01-01

BWR and some PWR cores contain boron carbide (B 4 C) as neutron absorber. During a severe accident, the B 4 C can potentially react with steam under release of heat and hydrogen. Although models for B 4 C oxidation already exist in MELCOR and SCDAP/RELAP5, a development of a new model for another computer code seems to be difficult due to a missing comprehensive description of the current modelling methodology and scarce experimental data. The aim of this paper is to highlight the key points of the B 4 C oxidation using the existing available experimental data and to perform a simple heat balance analysis of the B 4 C/steam and B 4 C/air chemical reactions. The analysis of literature data shows that the B 4 C oxidation phenomenon is qualitatively well described below 1000 deg. C. However, no reliable data exist for the reaction kinetics especially above this temperature. It was found that the experimental results strongly depend on the experimental arrangement. The reaction heats, calculated in this study, indicate that the B 4 C oxidation is an exothermic reaction, releasing more heat in air than in steam. The formation of boric acids from the boron oxide increases the heat release from B 4 C by ∼ 10%, in the worst case. Although the total heat, released in a PWR core from the B 4 C oxidation, is probably much smaller than the heat released from the Zr/steam reaction, it is not excluded that the B 4 C oxidation can locally contribute to the damage of the control elements due to local overheating. Modelling of these phenomena is, however, very difficult due to the complex geometry of the liquefied control elements and due to absence of suitable data on the reaction kinetics. (author). 25 refs, 2 figs, 3 tabs

Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment.

Science.gov (United States)

Taniguchi, Naoya; Fujibayashi, Shunsuke; Takemoto, Mitsuru; Sasaki, Kiyoyuki; Otsuki, Bungo; Nakamura, Takashi; Matsushita, Tomiharu; Kokubo, Tadashi; Matsuda, Shuichi

2016-02-01

Selective laser melting (SLM) is an additive manufacturing technique with the ability to produce metallic scaffolds with accurately controlled pore size, porosity, and interconnectivity for orthopedic applications. However, the optimal pore structure of porous titanium manufactured by SLM remains unclear. In this study, we evaluated the effect of pore size with constant porosity on in vivo bone ingrowth in rabbits into porous titanium implants manufactured by SLM. Three porous titanium implants (with an intended porosity of 65% and pore sizes of 300, 600, and 900μm, designated the P300, P600, and P900 implants, respectively) were manufactured by SLM. A diamond lattice was adapted as the basic structure. Their porous structures were evaluated and verified using microfocus X-ray computed tomography. Their bone-implant fixation ability was evaluated by their implantation as porous-surfaced titanium plates into the cortical bone of the rabbit tibia. Bone ingrowth was evaluated by their implantation as cylindrical porous titanium implants into the cancellous bone of the rabbit femur for 2, 4, and 8weeks. The average pore sizes of the P300, P600, and P900 implants were 309, 632, and 956μm, respectively. The P600 implant demonstrated a significantly higher fixation ability at 2weeks than the other implants. After 4weeks, all models had sufficiently high fixation ability in a detaching test. Bone ingrowth into the P300 implant was lower than into the other implants at 4weeks. Because of its appropriate mechanical strength, high fixation ability, and rapid bone ingrowth, our results indicate that the pore structure of the P600 implant is a suitable porous structure for orthopedic implants manufactured by SLM. Copyright © 2015 Elsevier B.V. All rights reserved.

Clinical Trial Assessing the Efficacy of Gabapentin Plus B Complex (B1/B12 versus Pregabalin for Treating Painful Diabetic Neuropathy

Directory of Open Access Journals (Sweden)

Alberto Mimenza Alvarado

2016-01-01

Full Text Available Introduction. Painful diabetic neuropathy (PDN is a prevalent and impairing disorder. The objective of this study was to show the efficacy and safety of gabapentin (GBP plus complex B vitamins: thiamine (B1 and cyanocobalamine (B12 compared to pregabalin in patients with moderate to severe intensity PDN. Method. Multicenter, randomized, blind study. Two hundred and seventy patients were evaluated, 147 with GBP/B1/B12 and 123 with PGB, with a 7/10 pain intensity on the Visual Analog Scale (VAS. Five visits (12 weeks were scheduled. The GBP/B1 (100 mg/B12 (20 mg group started with 300 mg at visit 1 to 3600 mg at visit 5. The PGB group started with 75 mg/d at visit 1 to 600 mg/d at visit 5. Different safety and efficacy scales were applied, as well as adverse event assessment. Results. Both drugs showed reduction of pain intensity, without significant statistical difference (P=0.900. In the GBP/B1/B12 group, an improvement of at least 30% on VAS correlated to a 900 mg/d dose, compared with PGB 300 mg/d. Likewise, occurrence of vertigo was lower in the GBP/B1-B12 group, with a significant statistical difference, P=0.014. Conclusions. Our study shows that GPB/B1-B12 combination is as effective as PGB. Nonetheless, pain intensity reduction is achieved with 50% of the minimum required gabapentin dose alone (800 to 1600 mg/d in classic NDD trials. Less vertigo and dizziness occurrence was also observed in the GBP/B1/B12 group. This trial is registered with ClinicalTrials.gov NCT01364298.

Excitation energy of /sup 3/B/sub 1/ state of H/sub 2/O calculated from generalized oscillator strengths

Energy Technology Data Exchange (ETDEWEB)

Klump, K N; Lassettre, E N

1975-01-01

Generalized oscillator strengths have been determined for the 7.4 eV excitation in H/sub 2/O at initial electron kinetic energies from 300 to 600 eV and squared momentum changes (of the colliding electron) to 4.5 a.u. These data are employed, in an approximate formula developed by Lassettre and Dillon, to calculate the excitation energy of the lowest /sup 3/B/sub 1/ state of H/sub 2/O. The value obtained, 7.0 eV, is in good agreement with accurate quantum chemical calculations and with experiment. The estimated uncertainty, based on errors found for CO and He, is 0.1 eV. This is a plausible estimate, not an upper bound.

EphB4 as a therapeutic target in mesothelioma

International Nuclear Information System (INIS)

Liu, Ren; Ferguson, Benjamin D; Zhou, Yue; Naga, Kranthi; Salgia, Ravi; Gill, Parkash S; Krasnoperov, Valery

2013-01-01

Malignant pleural mesothelioma (MPM) often develops decades following exposure to asbestos. Current best therapy produces a response in only half of patients, and the median survival with this therapy remains under a year. A search for novel targets and therapeutics is underway, and recently identified targets include VEGF, Notch, and EphB4-Ephrin-B2. Each of these targets has dual activity, promoting tumor cell growth as well as tumor angiogenesis. We investigated EphB4 expression in 39 human mesothelioma tissues by immunohistochemistry. Xenograft tumors established with human mesothelioma cells were treated with an EphB4 inhibitor (monomeric soluble EphB4 fused to human serum albumin, or sEphB4-HSA). The combinatorial effect of sEphB4-HSA and biologic agent was also studied. EphB4 was overexpressed in 72% of mesothelioma tissues evaluated, with 85% of epithelioid and 38% of sarcomatoid subtypes demonstrating overexpression. The EphB4 inhibitor sEphB4-HSA was highly active as a single agent to inhibit tumor growth, accompanied by tumor cell apoptosis and inhibition of PI3K and Src signaling. Combination of sEphB4-HSA and the anti-VEGF antibody (Bevacizumab) was superior to each agent alone and led to complete tumor regression. EphB4 is a potential therapeutic target in mesothelioma. Clinical investigation of sEphB4-HSA as a single agent and in combination with VEGF inhibitors is warranted

BRAFV600E mutation and its association with clinicopathological features of colorectal cancer: a systematic review and meta-analysis.

Science.gov (United States)

Chen, Dong; Huang, Jun-Fu; Liu, Kai; Zhang, Li-Qun; Yang, Zhao; Chuai, Zheng-Ran; Wang, Yun-Xia; Shi, Da-Chuan; Huang, Qing; Fu, Wei-Ling

2014-01-01

Colorectal cancer (CRC) is a heterogeneous disease with multiple underlying causative genetic mutations. The B-type Raf proto-oncogene (BRAF) plays an important role in the mitogen-activated protein kinase (MAPK) signaling cascade during CRC. The presence of BRAFV600E mutation can determine the response of a tumor to chemotherapy. However, the association between the BRAFV600E mutation and the clinicopathological features of CRC remains controversial. We performed a systematic review and meta-analysis to estimate the effect of BRAFV600E mutation on the clinicopathological characteristics of CRC. We identified studies that examined the effect of BRAFV600E mutation on CRC within the PubMed, ISI Science Citation Index, and Embase databases. The effect of BRAFV600E on outcome parameters was estimated by odds ratios (ORs) with 95% confidence intervals (CIs) for each study using a fixed effects or random effects model. 25 studies with a total of 11,955 CRC patients met inclusion criteria. The rate of BRAFV600 was 10.8% (1288/11955). The BRAFV600E mutation in CRC was associated with advanced TNM stage, poor differentiation, mucinous histology, microsatellite instability (MSI), CpG island methylator phenotype (CIMP). This mutation was also associated with female gender, older age, proximal colon, and mutL homolog 1 (MLH1) methylation. This meta-analysis demonstrated that BRAFV600E mutation was significantly correlated with adverse pathological features of CRC and distinct clinical characteristics. These data suggest that BRAFV600E mutation could be used to supplement standard clinical and pathological staging for the better management of individual CRC patients, and could be considered as a poor prognostic marker for CRC.

Spectroscopy of V4+ and V3+ ions in a forsterite crystal

International Nuclear Information System (INIS)

Veremeichik, T F; Gaister, A V; Subbotin, Kirill A; Zharikov, Evgeny V; Protopopov, V N; Smirnov, Valerii A

2000-01-01

The absorption spectra of impurity vanadium ions in forsterite crystals are studied in the wavelength range from 600 to 2000 nm. It is found that the V 4+ ion in the tetrahedral coordination in crystals grown by the Czochralski technique exhibits strong absorption in the range from 600 to 1200 nm. The intense electron-vibrational progressions in the absorption spectra of impurity d-ions in crystals were observed for the first time at temperatures 300 and 77 K. In the authors' opinion, these progressions appear due to the formation of the oxovanadate complex and distortions of the structural tetrahedron. The forsterite crystal doped with V 4+ ions has a very high absorption cross section (up to 2.1x10 -18 cm 2 ) and a continuous broad absorption band, which makes this crystal promising as a passive laser switch in the range between 600 and 1200 nm. At the same time, the V 4+ ions in the forsterite crystal do not emit luminescence because of a high probability of the nonradiative relaxation of their excited state. It is shown that luminescence of a V:Mg 2 SiO 4 crystal is related to the tetrahedral V 3+ ion. (laser applications and other topics in quantum electronics)

40 CFR 600.507-86 - Running change data requirements.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Running change data requirements. 600... Passenger Automobiles)-Procedures for Determining Manufacturer's Average Fuel Economy § 600.507-86 Running... shall submit additional running change fuel economy data as specified in paragraph (b) of this section...

40 CFR 600.507-08 - Running change data requirements.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Running change data requirements. 600... Passenger Automobiles)-Procedures for Determining Manufacturer's Average Fuel Economy § 600.507-08 Running... shall submit additional running change fuel economy data as specified in paragraph (b) of this section...

Combination of Dll4/Notch and Ephrin-B2/EphB4 targeted therapy is highly effective in disrupting tumor angiogenesis

International Nuclear Information System (INIS)

Djokovic, Dusan; Gill, Parkash S; Duarte, Antonio; Trindade, Alexandre; Gigante, Joana; Badenes, Marina; Silva, Lilliana; Liu, Ren; Li, Xiuqing; Gong, Ming; Krasnoperov, Valery

2010-01-01

Dll4/Notch and Ephrin-B2/EphB4 pathways play critical roles in tumor vessel development and maturation. This study evaluates the efficacy of the inhibition of both signaling pathways, alone and in combination, in reducing the growth of an autochthonous mouse tumor and assesses potential adverse effects. We used the transgenic RIP1-Tag2 tumor model to study the effects of 1) inhibition of Dll4/Notch by either Dll4 allelic deletion or use of a soluble extracellular Dll4 (sDll4), 2) inhibition of Ephrin-B2/EphB4 signaling by a soluble extracellular EphB4 fused to albumin (sEphB4-Alb), and 3) inhibition of both pathways by sEphB4-Alb combined with either Dll4 allelic deletion or sDll4. To investigate adverse effects, we used inducible endothelial-specific Dll4 knock-out mice, treated with sEphB4-Alb, and carried out histopathological analysis. Dll4 allele deletion or soluble Dll4 treatment resulted in increased tumor vessel density, reduced mural cell recruitment and vessel perfusion which resulted in reduced tumor size. The soluble EphB4 instead reduced vessel density and vessel perfusion, leading to reduction of tumor size. Greater efficacy was observed when sEphB4-Alb was combined with either Dll4 allele deletion or sDll4 in regards to tumor size, vessel perfusion and mural cell recruitment. Induced endothelial specific Dll4 loss-of-function caused hepatic vascular alterations, which were prevented by concomitant sEphB4-Alb treatment. Combination targeting of Dll4/Notch and Ephrin-B2/EphB4 has potential for clinical investigation, providing cumulative efficacy and increased safety over Dll4/Notch inhibition alone

WARM SPITZER OBSERVATIONS OF THREE HOT EXOPLANETS: XO-4b, HAT-P-6b, AND HAT-P-8b

Energy Technology Data Exchange (ETDEWEB)

Todorov, Kamen O. [Department of Astronomy and Astrophysics, The Pennsylvania State University, University Park, PA 16802 (United States); Deming, Drake [Planetary Systems Laboratory, NASA' s Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Knutson, Heather A. [Division of Geological and Planetary Sciences, California Institute of Technology, Pasadena, CA 91125 (United States); Burrows, Adam [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 05844 (United States); Sada, Pedro V. [Department of Physics and Mathematics, University of Monterrey, Monterrey (Mexico); Cowan, Nicolas B. [Department of Physics and Astronomy, Northwestern University, Evanston, IL 60208 (United States); Agol, Eric [Department of Astronomy, University of Washington, Box 351580, Seattle, WA 98195 (United States); Desert, Jean-Michel; Charbonneau, David [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA 02138 (United States); Fortney, Jonathan J.; Laughlin, Gregory [Department of Astronomy and Astrophysics, University of California at Santa Cruz, Santa Cruz, CA 95064 (United States); Langton, Jonathan [Department of Physics, Principia College, Elsah, IL 62028 (United States); Showman, Adam P.; Lewis, Nikole K. [Lunar and Planetary Laboratory, University of Arizona, Tucson, AZ 85721 (United States)

2012-02-10

We analyze Warm Spitzer/Infrared Array Camera observations of the secondary eclipses of three planets, XO-4b, HAT-P-6b, and HAT-P-8b. We measure secondary eclipse amplitudes at 3.6 {mu}m and 4.5 {mu}m for each target. XO-4b exhibits a stronger eclipse depth at 4.5 {mu}m than at 3.6 {mu}m, which is consistent with the presence of a temperature inversion. HAT-P-8b shows a stronger eclipse amplitude at 3.6 {mu}m and is best described by models without a temperature inversion. The eclipse depths of HAT-P-6b can be fitted with models with a small or no temperature inversion. We consider our results in the context of a postulated relationship between stellar activity and temperature inversion and a relationship between irradiation level and planet dayside temperature, as discussed by Knutson et al. and Cowan and Agol, respectively. Our results are consistent with these hypotheses, but do not significantly strengthen them. To measure accurate secondary eclipse central phases, we require accurate ephemerides. We obtain primary transit observations and supplement them with publicly available observations to update the orbital ephemerides of the three planets. Based on the secondary eclipse timing, we set upper boundaries for ecos ({omega}) for HAT-P-6b, HAT-P-8b, and XO-4b and find that the values are consistent with circular orbits.

Validation of SCALE-4 criticality sequences using ENDF/B-V data

International Nuclear Information System (INIS)

Bowman, S.M.; Wright, R.Q.; DeHart, M.D.; Taniuchi, H.

1993-01-01

The SCALE code system developed at Oak Ridge National Laboratory contains criticality safety analysis sequences that include the KENO V.a Monte Carlo code for calculation of the effective multiplication factor. These sequences are widely used for criticality safety analyses performed both in the United States and abroad. The purpose of the current work is to validate the SCALE-4 criticality sequences with an ENDF/B-V cross-section library for future distribution with SCALE-4. The library used for this validation is a broad-group library (44 groups) collapsed from the 238-group SCALE library. Extensive data testing of both the 238-group and the 44-group libraries included 10 fast and 18 thermal CSEWG benchmarks and 5 other fast benchmarks. Both libraries contain approximately 300 nuclides and are, therefore, capable of modeling most systems, including those containing spent fuel or radioactive waste. The validation of the broad-group library used 93 critical experiments as benchmarks. The range of experiments included 60 light-water-reactor fuel rod lattices, 13 mixed-oxide fuel rod lattice, and 15 other low- and high-enriched uranium critical assemblies

Scale-up operations of CuSOB4B-NaB2BSOB4B electrolytic ...

African Journals Online (AJOL)

Scale-up techniques were established for an Inclined Cathode Electrochemical Cell (ICEC) for the removal of copper ions from a CuSOB4B-NaB2BSOB4B solution at reduced operation power consumption. The scale-up relationshi-ps were derived and applied in conjunction with scale-up factors. With a scale-up factor of 2, ...

Three-Dimensional Groundwater Models of the 300 Area at the Hanford Site, Washington State

Energy Technology Data Exchange (ETDEWEB)

Williams, Mark D.; Rockhold, Mark L.; Thorne, Paul D.; Chen, Yousu

2008-09-01

Researchers at Pacific Northwest National Laboratory developed field-scale groundwater flow and transport simulations of the 300 Area to support the 300-FF-5 Operable Unit Phase III Feasibility Study. The 300 Area is located in the southeast portion of the U.S. Department of Energy’s Hanford Site in Washington State. Historical operations involving uranium fuel fabrication and research activities at the 300 Area have contaminated engineered liquid-waste disposal facilities, the underlying vadose zone, and the uppermost aquifer with uranium. The main objectives of this research were to develop numerical groundwater flow and transport models to help refine the site conceptual model, and to assist assessment of proposed alternative remediation technologies focused on the 300 Area uranium plume.

GTHTR 300 economic calculation with Mini G4ECONS as a basis for generation cost of GTHTR 10 MWe calculation

International Nuclear Information System (INIS)

Mochamad Nasrullah; Nurlaila

2014-01-01

The government plan to build Experimental Power Reactor (EPR) requires measurable economic assessment. The purpose of the study was to recalculate Gas Turbine High Temperature Reactor of 300 MWe (GTHTR 300) and compare the results with reference data. Then calculate generation cost of GTHTR 3, 5 and 10 MWe using the scale factor calculation. The methodology used is covered the generation cost calculation using the Mini G4Econs spread sheet models published by IAEA. Result of the verification calculation showed that a relatively similar, which means that the calculation model could be used to calculate for same other cases. Afterward, using scale factor, smaller scale reactor could be calculated. The calculation result show that electricity generation cost of SMR-HTR type with load factor 90% and discount rate 10% for power capacity 3, 5 and 10 MWe are 29.5, 22.68 and 16.17 cents$/kWh respectively. However, because the EPR is planning to be built as a non-commercial power reactors, then 5 % and 3 % of discount rate could be chosen, each of those discount rate will result electricity generation cost of 10.37 cents$/kWh and 8.56 cents$/kWh respectively. These result could be considered by the government for developing SMR type of HTR. (author)

Prophylactic single-dose administration of 600 mg clindamycin versus 4-time administration of 600 mg clindamycin in orthognathic surgery: A prospective randomized study in bilateral mandibular sagittal ramus osteotomies

NARCIS (Netherlands)

Lindeboom, Jerôme A. H.; Baas, Eric M.; Kroon, Frans H. M.

2003-01-01

Objective. The purpose of this study was to compare a single 600-mg dose of preoperative intravenously administered clindamycin with a 24-hour 600-mg regimen of clindamycin as prophylaxis for postoperative infections in bilateral sagittal ramus osteotomies. Study design. Seventy patients were

Cutting Edge: 2B4-Mediated Coinhibition of CD4+ T Cells Underlies Mortality in Experimental Sepsis.

Science.gov (United States)

Chen, Ching-Wen; Mittal, Rohit; Klingensmith, Nathan J; Burd, Eileen M; Terhorst, Cox; Martin, Greg S; Coopersmith, Craig M; Ford, Mandy L

2017-09-15

Sepsis is a leading cause of death in the United States, but the mechanisms underlying sepsis-induced immune dysregulation remain poorly understood. 2B4 (CD244, SLAM4) is a cosignaling molecule expressed predominantly on NK cells and memory CD8 + T cells that has been shown to regulate T cell function in models of viral infection and autoimmunity. In this article, we show that 2B4 signaling mediates sepsis lymphocyte dysfunction and mortality. 2B4 expression is increased on CD4 + T cells in septic animals and human patients at early time points. Importantly, genetic loss or pharmacologic inhibition of 2B4 significantly increased survival in a murine cecal ligation and puncture model. Further, CD4-specific conditional knockouts showed that 2B4 functions on CD4 + T cell populations in a cell-intrinsic manner and modulates adaptive and innate immune responses during sepsis. Our results illuminate a novel role for 2B4 coinhibitory signaling on CD4 + T cells in mediating immune dysregulation. Copyright © 2017 by The American Association of Immunologists, Inc.

Modeling of wear behavior of Al/B_4C composites produced by powder metallurgy

International Nuclear Information System (INIS)

Sahin, Ismail; Bektas, Asli; Guel, Ferhat; Cinci, Hanifi

2017-01-01

Wear characteristics of composites, Al matrix reinforced with B_4C particles percentages of 5, 10,15 and 20 produced by the powder metallurgy method were studied in this study. For this purpose, a mixture of Al and B_4C powders were pressed under 650 MPa pressure and then sintered at 635 C. The analysis of hardness, density and microstructure was performed. The produced samples were worn using a pin-on-disk abrasion device under 10, 20 and 30 N load through 500, 800 and 1200 mesh SiC abrasive papers. The obtained wear values were implemented in an artificial neural network (ANN) model having three inputs and one output using feed forward backpropagation Levenberg-Marquardt algorithm. Thus, the optimum wear conditions and hardness values were determined.

40 CFR 600.007-80 - Vehicle acceptability.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Vehicle acceptability. 600.007-80... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1977 and Later Model Year Automobiles-General Provisions § 600.007-80 Vehicle acceptability. (a) All...

40 CFR 600.007-08 - Vehicle acceptability.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Vehicle acceptability. 600.007-08... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1977 and Later Model Year Automobiles-General Provisions § 600.007-08 Vehicle acceptability. (a) All...

BRAFV600E mutation and its association with clinicopathological features of colorectal cancer: a systematic review and meta-analysis.

Directory of Open Access Journals (Sweden)

Dong Chen

Full Text Available BACKGROUND: Colorectal cancer (CRC is a heterogeneous disease with multiple underlying causative genetic mutations. The B-type Raf proto-oncogene (BRAF plays an important role in the mitogen-activated protein kinase (MAPK signaling cascade during CRC. The presence of BRAFV600E mutation can determine the response of a tumor to chemotherapy. However, the association between the BRAFV600E mutation and the clinicopathological features of CRC remains controversial. We performed a systematic review and meta-analysis to estimate the effect of BRAFV600E mutation on the clinicopathological characteristics of CRC. METHODS: We identified studies that examined the effect of BRAFV600E mutation on CRC within the PubMed, ISI Science Citation Index, and Embase databases. The effect of BRAFV600E on outcome parameters was estimated by odds ratios (ORs with 95% confidence intervals (CIs for each study using a fixed effects or random effects model. RESULTS: 25 studies with a total of 11,955 CRC patients met inclusion criteria. The rate of BRAFV600 was 10.8% (1288/11955. The BRAFV600E mutation in CRC was associated with advanced TNM stage, poor differentiation, mucinous histology, microsatellite instability (MSI, CpG island methylator phenotype (CIMP. This mutation was also associated with female gender, older age, proximal colon, and mutL homolog 1 (MLH1 methylation. CONCLUSIONS: This meta-analysis demonstrated that BRAFV600E mutation was significantly correlated with adverse pathological features of CRC and distinct clinical characteristics. These data suggest that BRAFV600E mutation could be used to supplement standard clinical and pathological staging for the better management of individual CRC patients, and could be considered as a poor prognostic marker for CRC.

10 CFR 600.323 - Property management system.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Property management system. 600.323 Section 600.323 Energy....323 Property management system. The recipient's property management system must include the following... existence, current utilization, and continued need for the property. (d) A control system must be in effect...

Passive safety design characteristics of the KALIMER-600 burner reactor

International Nuclear Information System (INIS)

Kwon, Young-Min; Jeong, Hae-Yong; Cho, Chung-Ho; Ha, Ki-Seok; Kim, Sang-Ji

2009-01-01

The Korea Atomic Energy Research Institute (KAERI) has recently studied several burner core designs for a transuranics (TRU) transmutation based on the breakeven core geometry of KALIMER-600. The KALIMER-600 is a net electrical rating of 600MWe, sodium-cooled, metallic-fueled, pool-type reactor. For the burner core concept selected for the present analysis, the smearing fractions of the fuel rods in three fuel zones are changed while maintaining the cladding outer diameter and cladding thickness. The resulting fuel slug smearing fractions of the inner, middle, and outer core zones are 36%, 40%, and 48%, respectively. The TRU conversion ratio is 0.57 and the TRU enrichment of the driver fuel is set to 30.0 w/o because of the current practical limitation of the U-TRU-10%Zr metal fuel database. The purpose of this paper is to evaluate the safety performance characteristics provided by the passive safety design features in the KALIMER-600 burner reactor by using a system-wide safety analysis code. The present scoping analysis focuses on an assessment of the enhanced safety design features that provide passive and self-regulating responses to transient conditions and an evaluation of the safety margin during unprotected overpower, unprotected loss of flow, and unprotected loss of heat sink events. The analysis results show that the KALIMER-600 burner reactor provides larger safety margins with respect to the sodium boiling, fuel rod integrity, and structural integrity. The overall inherent safety can be enhanced by accounting for the reactivity feedback mechanisms in the design process. (author)

76 FR 24356 - Airworthiness Directives; Airbus Model A300 B4-601, B4-603, B4-605R, C4-605R Variant F, and F4...

Science.gov (United States)

2011-05-02

... specified products. The MCAI states: Airbus, in the frame of the Extended Service Goal (ESG) exercise, has...) states: Airbus, in the frame of the Extended Service Goal (ESG) exercise, has demonstrated by post... aviation product. The MCAI describes the unsafe condition as: Airbus, in the frame of the Extended Service...

Large scale FCI experiments in subassembly geometry. Test facility and model experiments

International Nuclear Information System (INIS)

Beutel, H.; Gast, K.

A program is outlined for the study of fuel/coolant interaction under SNR conditions. The program consists of a) under water explosion experiments with full size models of the SNR-core, in which the fuel/coolant system is simulated by a pyrotechnic mixture. b) large scale fuel/coolant interaction experiments with up to 5kg of molten UO 2 interacting with liquid sodium at 300 deg C to 600 deg C in a highly instrumented test facility simulating an SNR subassembly. The experimental results will be compared to theoretical models under development at Karlsruhe. Commencement of the experiments is expected for the beginning of 1975

50 CFR 600.1410 - Registry process.

Science.gov (United States)

2010-10-01

... United States § 600.1410 Registry process. (a) A person may register through the NMFS web site at www... state registration or U.S. Coast Guard documentation number; home port or principal area of operation... website. (b) Individuals must submit their name; address; telephone number; date of birth; region(s) of...

40 CFR 300.110 - National Response Team.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 27 2010-07-01 2010-07-01 false National Response Team. 300.110... PLAN Responsibility and Organization for Response § 300.110 National Response Team. National planning... agencies named in § 300.175(b). Each agency shall designate a member to the team and sufficient alternates...

Directional crystallization of B4C-NbB2 and B4C-MoB2 eutectic compositions

International Nuclear Information System (INIS)

Paderno, Varvara; Paderno, Y.B.; Filippov, Vladimir; Liashchenko, Alfred

2004-01-01

We studied the directional crystallization of different compositions in B 4 C-NbB 2 and B 4 C-MoB 2 systems. The eutectic compositions for both systems are evaluated. It is shown that in the first system the rod-like eutectic structure is formed, in second, the 'Chinese hieroglyphics'. In both cases high hardness and high microplasticity are observed, which are much more than for individual component phases. These compositions may be considered as a new kind of self-strengthening composite materials

On assessing electromagnetic field (300 kmhz – 300mhz in a large industrial city on the basis of 3d modeling and instrumental measuring

Directory of Open Access Journals (Sweden)

I.V. May

2017-09-01

Full Text Available The article dwells on issues of modeling electromagnetic fields levels (EMF with frequency equal to 300 KMHz - 300 MHz which are created by television and radio broadcasting objects, radiolocation, and mobile communication in a large regional cen-ter, in geoinformation system environment. Our task was to estimate EMF levels on areas where apartment blocks were located; to assess energy flows at various floors, to determine zones in a city as per EMF levels; to verify the obtained results with the direct factor measuring. Our calculation included data on 2,011 EMF sources located on a city territory. We allowed for bulk parameters of 31,949 buildings including 17,307 apartment blocks, 3,160 administrative buildings, 307 pre-school children facilities and 105 secondary schools. We performed our calculations in city coordinate system at 109 thousand points. Each calculation created a picture of EMF spread in a plane at a set height which allowed us to determine exposure level at a control point as per "slice" re-sults and to build up a 3D contamination model. Approximately 80% of all the calculated results had EMF parameters within 0.1-10 safety criterion range. We spotted zones with maximum calculated EMF levels at 18-25 meters. Instrumental research proved high factor levels in these zones including those where levels exceeded safety criterion 4-6 times; it makes for certain vigilance in judgments on environmental safety for people who live on the examined territory permanently. The obtained data can be used for foundation of instrumental research points within the frameworks of specific research or social-hygienic monitoring as well as for consequent exposure and health risk assessment. The materials can be used in epidemiologic research for conjugate spatial analysis of energy flows and children and adults mortality.

Calculation of criticality of the AP600 reactor with KENO V.a code

Energy Technology Data Exchange (ETDEWEB)

Krumbein, A; Caner, M; Shapira, M [Israel Atomic Energy Commission, Yavne (Israel). Soreq Nuclear Research Center

1996-12-01

The Westinghouse AP600 PWR has been modeled using the KENO V.a three dimensional Monte Carlo criticality program of the SCALE-PC code system. These calculations and the use of a Monte Carlo neutron transport code such as KENO will provide us with an independent check on our WIMS/CITATION calculations for the AP600 as well as for other reactors. It will also enable us to model more complicated geometries. (authors).

Toward the identification of a reliable 3D-QSAR model for the protein tyrosine phosphatase 1B inhibitors

Science.gov (United States)

Wang, Fangfang; Zhou, Bo

2018-04-01

Protein tyrosine phosphatase 1B (PTP1B) is an intracellular non-receptor phosphatase that is implicated in signal transduction of insulin and leptin pathways, thus PTP1B is considered as potential target for treating type II diabetes and obesity. The present article is an attempt to formulate the three-dimensional quantitative structure-activity relationship (3D-QSAR) modeling of a series of compounds possessing PTP1B inhibitory activities using comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) techniques. The optimum template ligand-based models are statistically significant with great CoMFA (R2cv = 0.600, R2pred = 0.6760) and CoMSIA (R2cv = 0.624, R2pred = 0.8068) values. Molecular docking was employed to elucidate the inhibitory mechanisms of this series of compounds against PTP1B. In addition, the CoMFA and CoMSIA field contour maps agree well with the structural characteristics of the binding pocket of PTP1B active site. The knowledge of structure-activity relationship and ligand-receptor interactions from 3D-QSAR model and molecular docking will be useful for better understanding the mechanism of ligand-receptor interaction and facilitating development of novel compounds as potent PTP1B inhibitors.

Dosimetry characteristics of thermoluminescent Li2B4O7:Cu phosphor

International Nuclear Information System (INIS)

Lakshmanan, A.R.; Chandra, B.; Bhatt, R.C.

1981-01-01

Preliminary investigations on the radiation dosimetry characteristics of Li 2 B 4 O 7 :Cu TLD phosphor are described. The major TL peak in this phosphor occurs at 230 0 C and its TL sensitivity to gamma radiation is two to three times higher than that of LiF TLD-100. The gamma dose Vs TL response of this peak is linear (within +- 20%) in the dose range 0.3 mGy-3x10 2 Gy above which saturation sets in. Its TL response for 30 keV X-rays is about 20% lower than that for 60 Coγ-rays. On annealing at 300 0 C, the phosphor gets slightly discoloured (brownish). This results in the reduction of the TL sensitivity by about 20 - 25%. The phosphor does not exhibit either sensitization or damage even after a gamma dose of 10 3 Gy. The TL emission spectrum has a broad peak at 360 nm. The intrinsic TL sensitivity of virgin Li 2 B 4 O 7 :Cu to 253.7 nm UV radiation is nearly 50 times higher than that of CaSO 4 :Dy. The post-irradiation fading in Li 2 B 4 O 7 :Cu at ambient temperature and humidity conditions is, however, less than 10% in 17 days. These characteristics indicate that Li 2 B 4 O 7 :Cu is a promising phosphor for ionizing as well as UV radiation dosimetry. (author)

Gigantic optical magnetoelectric effect in CuB2O4

International Nuclear Information System (INIS)

Saito, Mitsuru; Taniguchi, Kouji; Arima, Taka-hisa

2008-01-01

Although it has been well known that materials in which both space inversion and time reversal symmetries are broken can host optical magneto-electric effect, i.e., change in optical constants with the reversal of propagating direction of light, the largest change in absorption ever reported on this effect was 0.2%. Here we show that optical absorption in noncentrosymmetric weak ferromagnetic material CuB 2 O 4 changes by more than 100% with reversal of a low magnetic field of 300 Oe. The gigantic optical magneto-electric effect is ascribed to the canted antiferromagnetic spin ordering of square-coordinated Cu 2+ sites, where the local inversion is slightly broken. (author)

The activation of p38 MAPK primarily contributes to UV-induced RhoB expression by recruiting the c-Jun and p300 to the distal CCAAT box of the RhoB promoter

International Nuclear Information System (INIS)

Ahn, Jiwon; Choi, Jeong-Hae; Won, Misun; Kang, Chang-Mo; Gyun, Mi-Rang; Park, Hee-Moon; Kim, Chun-Ho; Chung, Kyung-Sook

2011-01-01

Highlights: → Regulation of transcriptional activation of RhoB is still unclear. → We examine the effect of p38 MAPK inhibition, and c-Jun and RhoB depletion on UV-induced RhoB expression and apoptosis. → We identify the regions of RhoB promoter necessary to confer UV responsiveness using pRhoB-luciferase reporter assays. → c-Jun, ATF2 and p300 are dominantly associated with NF-Y on the distal CCAAT box. → The activation of p38 MAPK primarily contribute to UV-induced RhoB expression by recruiting the c-Jun and p300 proteins on distal CCAAT box of RhoB promoter. -- Abstract: The Ras-related small GTP-binding protein RhoB is rapidly induced in response to genotoxic stresses caused by ionizing radiation. It is known that UV-induced RhoB expression results from the binding of activating transcription factor 2 (ATF2) via NF-Y to the inverted CCAAT box (-23) of the RhoB promoter. Here, we show that the association of c-Jun with the distal CCAAT box (-72) is primarily involved in UV-induced RhoB expression and p38 MAPK regulated RhoB induction through the distal CCAAT box. UV-induced RhoB expression and apoptosis were markedly attenuated by pretreatment with the p38 MAPK inhibitor. siRNA knockdown of RhoB, ATF2 and c-Jun resulted in decreased RhoB expression and eventually restored the growth of UV-irradiated Jurkat cells. In the reporter assay using luciferase under the RhoB promoter, inhibition of RhoB promoter activity by the p38 inhibitor and knockdown of c-Jun using siRNA occurred through the distal CCAAT box. Immunoprecipitation and DNA affinity protein binding assays revealed the association of c-Jun and p300 via NF-YA and the dissociation of histone deacetylase 1 (HDAC1) via c-Jun recruitment to the CCAAT boxes of the RhoB promoter. These results suggest that the activation of p38 MAPK primarily contributes to UV-induced RhoB expression by recruiting the c-Jun and p300 proteins to the distal CCAAT box of the RhoB promoter in Jurkat cells.

Evaluation of inelastic constitutive models under plasticity-creep interaction for 2 1/4 Cr-1 Mo steel: Results of joint work (A)

International Nuclear Information System (INIS)

Inoue, T.; Ohno, N.; Suzuki, A.; Igari, T.

1987-01-01

The authorization of constitutive models under plasticity-creep condition and life estimation methods in fatigue-creep regime is expected to be achieved from the viewpoint of design purposes of high temperature components of reactor structures. The present Subcommittee has performed the cooperative project consisting of the following two parts: (A) To review and evaluate inelastic constitutive models relevant to the material response under plasticity-creep interaction and (B) to recommend some adequate methods to estimate material life under fatigue-creep interaction by taking account of the effect of plasticity-creep interaction on the stress-strain hysteresis loops. The material treated is normalized and tempered 2 1/4 Cr-1Mo steel at 600 0 C. The part (A) plays a preliminary role for the part (B), since the constitutive models examined in the part (A) were used to describe the stress-strain hysteresis loops necessary to predict analytically the lives under fatigue-creep interaction. In the part (A), thererfore, it is important to check how accurately the constitutive models simulate the stress-strain hysteresis loops especially by taking account of the effect of plasticity-creep interaction. (orig./GL)

Prevalence of the B Type Raf Kinase V600E Mutation in Cytologically Indeterminate Thyroid Nodules: Correlation with Ultrasonographic and Pathologic Features

Energy Technology Data Exchange (ETDEWEB)

Kim, Chae Hyun; Choi, Yoon Jung; Choi, Seon Hyeong; Rho, Myong Ho Kook Shin Ho; Chung, Eun Chul [Dept. of Radiology, Kangbuk Samsung Hospital, Sungkyunkwan University College of Medicine, Seoul (Korea, Republic of); Chae, Seoung Wan; Kim, Dong Hoon; Sohn, Jin Hee [Dept. of Radiology, Kangbuk Samsung Hospital, Sungkyunkwan University College of Medicine, Seoul (Korea, Republic of); Yun, Ji Sup [Dept. of Radiology, Kangbuk Samsung Hospital, Sungkyunkwan University College of Medicine, Seoul (Korea, Republic of)

2012-01-15

To study the prevalence of B type Raf kinase (BRAF) mutations, and to evaluate the ultrasonographic and clinicopathological features associated with thyroid cytology of indeterminate nodules. We assessed the presence or absence of BRAF mutation in 44 specimens from patients with cytologically indeterminate thyroid nodules according to two consecutive preoperative fine needle aspiration cytology procedures. In 9 specimens, the test for BRAF mutation was not possible due to scant cellularity. DNA was extracted from the atypical cells and then analyzed for the BRAF V600E mutation by pyrosequencing. The ultrasonographic and clinicopathological features of the patients were characterized according to their mutation status. The BRAF V600E mutation was present in 17 (48.6%) of 35 patients with indeterminate cytology results and in 17 (54.8%) of the 31 patients with papillary thyroid cancer (PTC). Twenty two of 35 cytologically indeterminate nodules had calcifications, and among them 14 cases were proven to be positive for BRAF V600E mutations. Extrathyroid extension was significantly more frequent in the presence of the BRAF V600E mutation (p = 0.027), while tumor size, lympho-vascular invasion, or lymph node metastasis were not associated with the mutation. Screening for BRAF V600E mutations in conjunction with cytology may increase the diagnostic accuracy for PTC with indeterminate cytology results.

Prevalence of the B Type Raf Kinase V600E Mutation in Cytologically Indeterminate Thyroid Nodules: Correlation with Ultrasonographic and Pathologic Features

International Nuclear Information System (INIS)

Kim, Chae Hyun; Choi, Yoon Jung; Choi, Seon Hyeong; Rho, Myong Ho Kook Shin Ho; Chung, Eun Chul; Chae, Seoung Wan; Kim, Dong Hoon; Sohn, Jin Hee; Yun, Ji Sup

2012-01-01

To study the prevalence of B type Raf kinase (BRAF) mutations, and to evaluate the ultrasonographic and clinicopathological features associated with thyroid cytology of indeterminate nodules. We assessed the presence or absence of BRAF mutation in 44 specimens from patients with cytologically indeterminate thyroid nodules according to two consecutive preoperative fine needle aspiration cytology procedures. In 9 specimens, the test for BRAF mutation was not possible due to scant cellularity. DNA was extracted from the atypical cells and then analyzed for the BRAF V600E mutation by pyrosequencing. The ultrasonographic and clinicopathological features of the patients were characterized according to their mutation status. The BRAF V600E mutation was present in 17 (48.6%) of 35 patients with indeterminate cytology results and in 17 (54.8%) of the 31 patients with papillary thyroid cancer (PTC). Twenty two of 35 cytologically indeterminate nodules had calcifications, and among them 14 cases were proven to be positive for BRAF V600E mutations. Extrathyroid extension was significantly more frequent in the presence of the BRAF V600E mutation (p = 0.027), while tumor size, lympho-vascular invasion, or lymph node metastasis were not associated with the mutation. Screening for BRAF V600E mutations in conjunction with cytology may increase the diagnostic accuracy for PTC with indeterminate cytology results.

10 CFR 600.120 - Purpose of financial and program management.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Purpose of financial and program management. 600.120 Section 600.120 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES... financial and program management. Sections 600.121 through 600.128 prescribe standards for financial...

Behaviour of filamentary MgB2 wires subjected to tensile stress at 4.2 K

International Nuclear Information System (INIS)

Kováč, P; Kopera, L; Melišek, T; Hušek, I; Rindfleisch, M; Haessler, W

2013-01-01

Different filamentary MgB 2 wires have been subjected to tensile stress at 4.2 K. Stress–strain and critical current versus stress and strain characteristics of wires differing by filament architecture, sheath materials, deformation and heat treatment were measured and compared. It was found that the linear increase of critical current due to the pre-compression effect (ranging from 5% up to ≈20%) is affected by thermal expansion and the strength of used metallic sheaths. The values of irreversible strain ε irr and stress σ irr depend dominantly on the applied outer sheath and its final heat treatment conditions. Consequently, the strain-tolerance of MgB 2 wires is influenced by several parameters and it is difficult to see a clear relation between I c (ε) and σ(ε) characteristics. The lowest ε irr was measured for Monel sheathed wires (0.3–0.6%), medium for GlidCop ® sheath (0.48–0.6%), and the highest ε irr = 0.6–0.9% were obtained for MgB 2 wires reinforced by the stainless steel 316L annealed at temperature between 600 and 800 ° C. The highest ε irr = 0.9% and σ irr = 900 MPa were measured for the work-hardened steel, which is not considerably softened by the heat treatment at 600 ° C/2.5 h. (paper)

12 CFR Appendix B to Subpart B of... - Article 4A, Funds Transfers

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Article 4A, Funds Transfers B Appendix B to...—Article 4A, Funds Transfers Part 1—Subject Matter and Definitions Section 4A-101. Short Title This Article... otherwise provided in section 4A-108, this Article applies to funds transfers defined in section 4A-104...

Low-temperature thermometry. Use of a gas thermometer as a calibration standard between 4 and 300 K

International Nuclear Information System (INIS)

Combarieu, A. de

1978-01-01

A constant volume gas thermometer was built to calibrate the various secondary thermometers used at low temperature. This gas thermometer is placed in a cryostat where any stable temperature between 4 and 300 K may be obtained. After some words about low temperature thermometry, the gas thermometer and its auxiliary equipment are described briefly; the corrections to be applied to the results are given and the article ends with a table showing the values obtained [fr

Thiacalix[4]arene derivatives containing multiple aromatic groups ...

Indian Academy of Sciences (India)

treatment processes have been developed, such as pre- cipitation, extraction ... extraction is seen as an effective method due to its ad- vantages of selective .... ammonia. The extraction data of compound 4 are cited from reference.22. 300. 400. 500. 600 .... cation(JA11044) and the Program for Innovative. Research Team in ...

50 CFR 300.66 - Prohibitions.

Science.gov (United States)

2010-10-01

... accordance with the annual management measures published pursuant to 50 CFR 300.62. (b) Fish for halibut except in accordance with the catch sharing plans and domestic management measures implemented under 50... while commercial fishing or from sport fishing, as defined at § 300.61, except that persons authorized...

Listeria monocytogenes serovar 4a is a possible evolutionary intermediate between L. monocytogenes serovars 1/2a and 4b and L. innocua.

Science.gov (United States)

Chen, Jianshun; Jiang, Lingli; Chen, Xueyan; Luo, Xiaokai; Chen, Yang; Yu, Ying; Tian, Guoming; Liu, Dongyou; Fang, Weihuan

2009-03-01

The genus Listeria consists of six closely related species and forms three phylogenetic groups: L. monocytogenes- L. innocua, L. ivanovii-L. seeligeri-L. welshimeri, and L. grayi. In this report, we attempted to examine the evolutionary relationship in the L. monocytogenes-L. innocua group by probing the nucleotide sequences of 23S rRNA and 16S rRNA, and the gene clusters lmo0029-lmo0042, ascBdapE, rplS-infC, and prs-ldh in L. monocytogenes serovars 1/2a, 4a, and 4b, and L. innocua. Additionally, we assessed the status of L. monocytogenes-specific inlA and inlB genes and 10 L. innocua-specific genes in these species/serovars, together with phenotypic characterization by using in vivo and in vitro procedures. The results indicate that L. monocytogenes serovar 4a strains are genetically similar to L. innocua in the lmo0035-lmo0042, ascB-dapE, and rplS-infC regions and also possess L. innocua-specific genes lin0372 and lin1073. Furthermore, both L. monocytogenes serovar 4a and L. innocua exhibit impaired intercellular spread ability and negligible pathogenicity in mouse model. On the other hand, despite resembling L. monocytogenes serovars 1/2a and 4b in having a nearly identical virulence gene cluster, and inlA and inlB genes, these serovar 4a strains differ from serovars 1/2a and 4b by harboring notably altered actA and plcB genes, displaying strong phospholipase activity and subdued in vivo and in vitro virulence. Thus, by possessing many genes common to L. monocytogenes serovars 1/2a and 4b, and sharing many similar gene deletions with L. innocua, L. monocytogenes serovar 4a represents a possible evolutionary intermediate between L. monocytogenes serovars 1/2a and 4b and L. innocua.

Workshop UNK-600 (proceedings); Materialy rabochego soveshchaniya UNK-600

Energy Technology Data Exchange (ETDEWEB)

Zajtsev, A M; Bitykov, S I [eds.

1994-12-31

Proceedings are presented of the workshop devoted to the accelerating storage complex of IHEP (UNK-600). In the first section is given the information on the present status of the UNK-600 and particle channels design and on the adopted experiment NEPTUN-A. In the papers of the second section are discussed hadron physics investigations at 600 GeV. Experiments in the neutrino and muon beams are analyzed. A possible program of studying the charged kaon rare decays is described.

EphB4 promotes or suppresses Ras/MEK/ERK pathway in a context-dependent manner: Implications for EphB4 as a cancer target.

Science.gov (United States)

Xiao, Zhan; Carrasco, Rosa; Kinneer, Krista; Sabol, Darrin; Jallal, Bahija; Coats, Steve; Tice, David A

2012-06-01

EphB4 is a member of the Eph receptor tyrosine kinase family shown to act in neuronal guidance and mediate venal/arterial separation. In contrast to these more established roles, EphB4's function in cancer is much less clear. Here we illustrate both tumor promoting as well as suppressing roles of EphB4, by showing that its activation resulted in inhibition of the Ras/ERK pathway in endothelial cells but activation of the same pathway in MCF-7 breast cancer cells. This was true if EphB4 was stimulated with EphrinB2, its natural ligand, or an agonistic monoclonal antibody for EphB4. Correspondingly, EphB4 activation stimulated MCF7 growth while inhibiting HUVEC cell proliferation. The reason for these dramatic differences is due to functional coupling of EphB4 to different downstream effectors. Reduction of p120 RasGAP in HUVEC cells attenuated the inhibitory effect of EphB4 activation on the ERK pathway, whereas knockdown of PP2A in MCF7 cells attenuated EphB4 activation of the ERK pathway. This represents the first time a functional coupling between Eph receptor and PP2A has been demonstrated leading to activation of an oncogenic pathway. Our study illustrates the caveats and potential challenges of targeting EphB4 for cancer therapy due to the conflicting effects on cancer cell and endothelial cell compartments.

A multi-slot surface coil for MRI of dual-rat imaging at 4 T

International Nuclear Information System (INIS)

Solis, S E; Rodriguez, A O; Wang, R; Tomasi, D

2011-01-01

A slotted surface coil inspired by the hole-and-slot cavity magnetron was developed for magnetic resonance imaging of obese rats at 4 T. Full-wave analysis of the magnetic field was carried out at 170 MHz for both the slotted and circular-shaped coils. The noise figure values of two coils were investigated via the numerical calculation of the quality factors. Fat simulated phantoms to mimic overweight rats were included in the analysis with weights ranging from 300 to 900 g. The noise figures were 1.2 dB for the slotted coil and 2.4 dB for the circular coil when loaded with 600 g of simulated phantom. A slotted surface coil with eight circular slots and a circular coil with similar dimensions were built and operated in the transceiver mode, and their performances were experimentally compared. The imaging tests in phantoms demonstrated that the slotted surface coil has a deeper RF-sensitivity and better field uniformity than the single-loop RF-coil. High quality images of two overweight Zucker rats were acquired simultaneously with the slotted surface coil using standard spin-echo pulse sequences. Experimental results showed that the slotted surface coil outperformed the circular coil for imaging considerably overweight rats. Thus, the slotted surface coil can be a good tool for MRI experiments in rats on a human whole-body 4 T scanner.

A multi-slot surface coil for MRI of dual-rat imaging at 4T

Energy Technology Data Exchange (ETDEWEB)

Solis, S.E.; Tomasi, D.; Solis, S.E.; Wang, R.; Tomasi, D.; Rodriguez, A.O.

2011-07-01

A slotted surface coil inspired by the hole-and-slot cavity magnetron was developed for magnetic resonance imaging of obese rats at 4 T. Full-wave analysis of the magnetic field was carried out at 170 MHz for both the slotted and circular-shaped coils. The noise figure values of two coils were investigated via the numerical calculation of the quality factors. Fat simulated phantoms to mimic overweight rats were included in the analysis with weights ranging from 300 to 900 g. The noise figures were 1.2 dB for the slotted coil and 2.4 dB for the circular coil when loaded with 600 g of simulated phantom. A slotted surface coil with eight circular slots and a circular coil with similar dimensions were built and operated in the transceiver mode, and their performances were experimentally compared. The imaging tests in phantoms demonstrated that the slotted surface coil has a deeper RF-sensitivity and better field uniformity than the single-loop RF-coil. High quality images of two overweight Zucker rats were acquired simultaneously with the slotted surface coil using standard spin-echo pulse sequences. Experimental results showed that the slotted surface coil outperformed the circular coil for imaging considerably overweight rats. Thus, the slotted surface coil can be a good tool for MRI experiments in rats on a human whole-body 4 T scanner.

A multi-slot surface coil for MRI of dual-rat imaging at 4 T

Energy Technology Data Exchange (ETDEWEB)

Solis, S E; Rodriguez, A O [Departamento de Ingenieria Electrica, Universidad Autonoma Metropolitana Iztapalapa, Mexico, DF 09340 (Mexico); Wang, R; Tomasi, D, E-mail: arog@xanum.uam.mx [Medical Department, Brookhaven National Laboratory, Upton, NY 11973 (United States)

2011-06-21

A slotted surface coil inspired by the hole-and-slot cavity magnetron was developed for magnetic resonance imaging of obese rats at 4 T. Full-wave analysis of the magnetic field was carried out at 170 MHz for both the slotted and circular-shaped coils. The noise figure values of two coils were investigated via the numerical calculation of the quality factors. Fat simulated phantoms to mimic overweight rats were included in the analysis with weights ranging from 300 to 900 g. The noise figures were 1.2 dB for the slotted coil and 2.4 dB for the circular coil when loaded with 600 g of simulated phantom. A slotted surface coil with eight circular slots and a circular coil with similar dimensions were built and operated in the transceiver mode, and their performances were experimentally compared. The imaging tests in phantoms demonstrated that the slotted surface coil has a deeper RF-sensitivity and better field uniformity than the single-loop RF-coil. High quality images of two overweight Zucker rats were acquired simultaneously with the slotted surface coil using standard spin-echo pulse sequences. Experimental results showed that the slotted surface coil outperformed the circular coil for imaging considerably overweight rats. Thus, the slotted surface coil can be a good tool for MRI experiments in rats on a human whole-body 4 T scanner.

Postirradiation tensile properties of Mo and Mo alloys irradiated with 600 MeV protons

International Nuclear Information System (INIS)

Mueller, G.V.; Gavillet, D.; Victoria, M.; Martin, J.L.

1994-01-01

Tensile specimens of pure Mo and Mo-5 Re, Mo-41 Re and TZM alloys have been irradiated with 600 MeV protons in the PIREX facility at 300 and 660 K to 0.5 dpa. Results of the postirradiation tensile testing show a strong radiation hardening and a severe loss of ductility for all the materials tested at room temperature. ((orig.))

Functional requirements for inhibitory signal transmission by the immunomodulatory receptor CD300a.

Science.gov (United States)

DeBell, Karen E; Simhadri, Venkateswara R; Mariano, John L; Borrego, Francisco

2012-04-26

Activation signals can be negatively regulated by cell surface receptors bearing immunoreceptor tyrosine-based inhibitory motifs (ITIMs). CD300a, an ITIM bearing type I transmembrane protein, is expressed on many hematopoietic cells, including subsets of lymphocytes. We have taken two approaches to further define the mechanism by which CD300a acts as an inhibitor of immune cell receptor signaling. First, we have expressed in Jurkat T cells a chimeric receptor consisting of the extracellular domains of killer-cell immunoglobulin-like receptor (KIR)2DL2 fused to the transmembrane and cytoplasmic segments of CD300a (KIR-CD300a) to explore surrogate ligand-stimulated inhibition of superantigen stimulated T cell receptor (TCR) mediated cell signaling. We found that intact CD300a ITIMs were essential for inhibition and that the tyrosine phosphorylation of these ITIMs required the src tyrosine kinase Lck. Tyrosine phosphorylation of the CD300a ITIMs created docking sites for both src homology 2 domain containing protein tyrosine phosphatase (SHP)-1 and SHP-2. Suppression of SHP-1 and SHP-2 expression in KIR-CD300a Jurkat T cells with siRNA and the use of DT40 chicken B cell lines expressing CD300a and deficient in several phosphatases revealed that SHP-1, but not SHP-2 or the src homology 2 domain containing inositol 5' phosphatase SHIP, was utilized by CD300a for its inhibitory activity. These studies provide new insights into the function of CD300a in tuning T and B cell responses.

10 CFR 600.310 - Purpose of financial and program management.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Purpose of financial and program management. 600.310... Requirements § 600.310 Purpose of financial and program management. Sections 600.311 through 600.318 prescribe standards for financial management systems; methods for making payments; and rules for cost sharing and...

10 CFR 600.15 - Authorized uses of information.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Authorized uses of information. 600.15 Section 600.15....15 Authorized uses of information. (a) General. Information contained in applications shall be used... and/or privileged or confidential commercial or financial information, which the applicant does not...

Formalin-inactivated EV71 vaccine candidate induced cross-neutralizing antibody against subgenotypes B1, B4, B5 and C4A in adult volunteers.

Directory of Open Access Journals (Sweden)

Ai-Hsiang Chou

Full Text Available Enterovirus 71 (EV71 has caused several epidemics of hand, foot and mouth diseases (HFMD in Asia. No effective EV71 vaccine is available. A randomized and open-label phase I clinical study registered with ClinicalTrials.gov #NCT01268787, aims to evaluate the safety, reactogenicity and immunogenicity of a formalin-inactivated EV71 vaccine candidate (EV71vac at 5- and 10-µg doses. In this study we report the cross-neutralizing antibody responses from each volunteer against different subgenotypes of EV71 and CVA16.Sixty eligible healthy adults were recruited and vaccinated. Blood samples were obtained on day 0, 21 and 42 and tested against B1, B4, B5, C2, C4A, C4B and CVA16 for cross-neutralizing antibody responses.The immunogenicity of both 5- and 10- µg doses were found to be very similar. Approximately 45% of the participants had 4-fold increase in Nt, but there was no further increase in Nt after the second dose. EV71vac induced very strong cross-neutralizing antibody responses in >85% of volunteers without pre-existing Nt against subgenotype B1, B5 and C4A. EV71vac elicited weak cross-neutralizing antibody responses (∼20% of participants against a C4B and Coxsackie virus A16. Over 90% of vaccinated volunteers did not develop cross-neutralizing antibody responses (Nt<8 against a C2 strain. EV71vac can boost and significantly enhance the neutralizing antibody responses in volunteers who already had pre-vaccination antibodies against EV71 and/or CVA16.EV71vac is efficient in eliciting cross-neutralizing antibody responses against EV71 subgenotypes B1, B4, B5, and C4A, and provides the rationale for its evaluation in phase II clinical trials.ClinicalTrials.gov NCT01268787.

Irradiation creep of the martensitic steel no. 1.4914 between 400 deg C and 600 deg C (Mol 5B)

International Nuclear Information System (INIS)

Herschbach, K.; Doser, W.

1983-01-01

The irradiation induced creep of the martensitic steel DIN No. 1.4914 was investigated in the temperature range from 400 to 600 deg C for stresses up to 200 Mpa using the Mol 5B irradiation rig. The results point to a behavior quite different from that observed in the austenitic steels as will be discussed in detail. The creep is thermally activated and non-linearly dependent upon the applied stress. (author)

Applicability of RELAP5 for safety analysis of AP600 and PIUS reactors

International Nuclear Information System (INIS)

Motloch, C.G.; Modro, S.M.

1990-01-01

An assessment of the applicability of using RELAP5 for performing safety analyses of the AP600 and PIUS advanced reactor concepts is being performed. This ongoing work is part of a larger safety assessment of advanced reactors sponsored by the United States Nuclear Regulatory Commission. RELAP5 models and correlations are being reviewed from the perspective of the new AP600 and PIUS phenomena and features that could be important to reactor safety. The purpose is to identify those areas in which new mathematical models of physical phenomena would be required to be added to RELAP5. In most cases, the AP600 and PIUS designs and systems and the planned and off-normal operations are similar enough to current Pressurized Water Reactors (PWR) that RELAP5 safety analysis applicability is unchanged. However, for AP600 the single most important systemic and phenomenological difference between it and current PWRs is in the close coupling between the reactor system and the containment during postulated Loss of Coolant Accident (LOCA) events. This close coupling may require the addition of some thermal-hydraulic models to RELAP5. And for PIUS, the most important new feature is the thermal density locks. These and other important safety-related features are discussed. This document presents general descriptions of RELAP5, AP600, and PIUS, describes the new features and phenomena of the reactors, and discusses the code/reactors safety-related issues. 32 refs., 4 figs., 2 tabs

Unaxial stress relaxation and creep behaviour in weldments of the pressure vessel steel A533B between 600 and 640 degree C

International Nuclear Information System (INIS)

Otterberg, R.

1979-10-01

In order to predict the stress reduction during stress relief heat treatment in welded joints of the pressure vessel steel A533B, uniaxial stress relaxation as well as creep tests have been performed. The specimens were isothermally stress relaxed between 600 and 640 degree C from initial stresses corresponding to specimen elongations of 0.25, 0.5 and 0.2 percent. The stress relaxation results are excellently described by a Norton relationship. The magnitude of the initial stress has been found to affect the stress relaxation in the beginning of the tests, but at times longer than one hour the effect is very small. Creep strain data from creep tests in the actual temperature interval was converted to describe stress relaxation behaviour as well. The results will be used in a forthcoming study to predict the multiaxial stress reduction in thick weldments of A533B. (author)

Modeling of wear behavior of Al/B{sub 4}C composites produced by powder metallurgy

Energy Technology Data Exchange (ETDEWEB)

Sahin, Ismail; Bektas, Asli [Gazi Univ., Ankara (Turkey). Dept. of Industrial Design Engineering; Guel, Ferhat; Cinci, Hanifi [Gazi Univ., Ankara (Turkey). Dept. of Materials and Metallurgy Engineering

2017-06-01

Wear characteristics of composites, Al matrix reinforced with B{sub 4}C particles percentages of 5, 10,15 and 20 produced by the powder metallurgy method were studied in this study. For this purpose, a mixture of Al and B{sub 4}C powders were pressed under 650 MPa pressure and then sintered at 635 C. The analysis of hardness, density and microstructure was performed. The produced samples were worn using a pin-on-disk abrasion device under 10, 20 and 30 N load through 500, 800 and 1200 mesh SiC abrasive papers. The obtained wear values were implemented in an artificial neural network (ANN) model having three inputs and one output using feed forward backpropagation Levenberg-Marquardt algorithm. Thus, the optimum wear conditions and hardness values were determined.

EXPERIMENTAL INVESTIGATION OF R-134a AND R-600a ...

African Journals Online (AJOL)

Preet khandelwal

performance of blends of two existing refrigerant, R-134a and R-600a, blended together at ratios of 11%/89%, ... blending ratios, estimated GWPs ≤ 150 using Ali's model. .... series are less flammable among other HCs and its .... Figure 2: Variation of Evaporator Temperature with Time at an Ambient Temperature of 37oC.

Analysis of the glow curve of SrB 4O 7:Dy compounds employing the GOT model

Science.gov (United States)

Ortega, F.; Molina, P.; Santiago, M.; Spano, F.; Lester, M.; Caselli, E.

2006-02-01

The glow curve of SrB 4O 7:Dy phosphors has been analysed with the general one trap model (GOT). To solve the differential equation describing the GOT model a novel algorithm has been employed, which reduces significantly the deconvolution time with respect to the time required by usual integration algorithms, such as the Runge-Kutta method.

Analysis of the glow curve of SrB4O7:Dy compounds employing the GOT model

International Nuclear Information System (INIS)

Ortega, F.; Molina, P.; Santiago, M.; Spano, F.; Lester, M.; Caselli, E.

2006-01-01

The glow curve of SrB 4 O 7 :Dy phosphors has been analysed with the general one trap model (GOT). To solve the differential equation describing the GOT model a novel algorithm has been employed, which reduces significantly the deconvolution time with respect to the time required by usual integration algorithms, such as the Runge-Kutta method

Johnson-Cook Strength Model Constants for VascoMax 300 and 1080 Steels

International Nuclear Information System (INIS)

Cinnamon, J. D.; Palazotto, A. N.; Kennan, Z.; Brar, N. S.; Bajaj, D.

2006-01-01

High strength steels, VascoMax 300 and 1080, are characterized under tension at strain rates of ∼1/s, ∼500/s, ∼1000/s, and ∼1500/s and at high temperatures using the quasi-static and split Hopkinson bar techniques. The data on 1080 steel exhibited a typical strain hardening response, whereas Vasco-Max 300 steel showed diminishing flow stress beyond yielding because of localized necking in gauge section of the tested specimens. The tension data are analyzed to determine the Johnson-Cook (J-C) strength model constants for the two steels. The flow stress values for VascoMax are adjusted to account for necking, and the corrected J-C model is developed

Modification, biological evaluation and 3D QSAR studies of novel 2-(1,3-diaryl- 4,5-dihydro-1H-pyrazol-5-ylphenol derivatives as inhibitors of B-Raf kinase.

Directory of Open Access Journals (Sweden)

Yu-Shun Yang

Full Text Available A series of novel 2-(1,3-diaryl- 4,5-dihydro-1H-pyrazol-5-ylphenol derivatives (C1-C24 have been synthesized. The B-Raf inhibitory activity and anti-proliferation activity of these compounds have been tested. Compound C6 displayed the most potent biological activity against B-RafV600E (IC50 = 0.15 µM and WM266.4 human melanoma cell line (GI50 = 1.75 µM, being comparable with the positive control (Vemurafenib and Erlotinib and more potent than our previous best compounds. The docking simulation was performed to analyze the probable binding models and poses while the QSAR model was built to check the previous work as well as to introduce new directions. This work aimed at seeking more potent inhibitors as well as discussing some previous findings. As a result, the introduction of ortho-hydroxyl group on 4,5-dihydro-1H-pyrazole skeleton did reinforce the anti-tumor activity while enlarging the group on N-1 of pyrazoline was also helpful.

10 CFR 600.341 - Monitoring and reporting program and financial performance.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Monitoring and reporting program and financial performance. 600.341 Section 600.341 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL... Organizations Post-Award Requirements § 600.341 Monitoring and reporting program and financial performance. (a...

A 600 MWe advanced PWR for the 1990's

International Nuclear Information System (INIS)

Lemon, J.E.; Malloy, J.D.; Allen, R.E.

1987-01-01

The Babcock and Wilcox Company (B and W) and United Engineers and Constructors (UE and C) have prepared a conceptual design of an advanced 600 MWe Presurized Water Nuclear Power Plant. This design utilizes the large body of design and operating experience on PWRs in the U.S. and abroad and incorporates improvements emphasizing simplicity, safety, licensability, ease of construction, operability, reliability and maintainability. Cost and schedule estimates based on U.S. utility experience indicate that this plant design should be competitive with alternate options

Conduction electron spin resonance in the α-Yb1−xFexAlB4 (0 ⩽ x ⩽ 0.50) and α-LuAlB4 compounds

International Nuclear Information System (INIS)

Holanda, L M; Lesseux, G G; Urbano, R R; Rettori, C; Pagliuso, P G; Magnavita, E T; Ribeiro, R A; Nakatsuji, S; Kuga, K; Fisk, Z; Oseroff, S B

2015-01-01

β-YbAlB 4 has become one of the most studied heavy fermion systems since its discovery due to its remarkable physical properties. This system is the first reported Yb-based heavy-fermion superconductor (HFS) for which the low-T superconducting state emerges from a non-fermi-liquid (NFL) normal state associated with quantum criticality Nakatsuji et al 2008 Nature 4 603. Additionally, it presents a striking and unprecedented electron spin resonance (ESR) signal which behaves as a conduction electron spin resonance (CESR) at high temperatures and acquires features of the Yb 3+ local moment ESR at low temperatures. The latter, also named Kondo quasiparticles spin resonance (KQSR), has been defined as a 4f-ce strongly coupled ESR mode that behaves as a local probe of the Kondo quasiparticles in a quantum critical regime, Holanda et al 2011 Phys. Rev. Lett. 107 026402. Interestingly, β-YbAlB 4 possesses a previously known structural variant, namely the α-YbAlB 4 , phase which is a paramagnetic Fermi liquid (FL) at low temperatures Macaluso et al 2007 Chem. Mater. 19 1918. However, it has been recently suggested that the α-YbAlB 4 phase may be tuned to NFL behavior and/or magnetic ordering as the compound is doped with Fe. Here we report ESR studies on the α-Yb 1−x Fe x AlB 4 (0 ⩽ x ⩽ 0.50) series as well as on the reference compound α-LuAlB 4 . For all measured samples, the observed ESR signal behaves as a CESR in the entire temperature range (10 K ≲ T ≲ 300 K) in clear contrast with what has been observed for β-YbAlB 4 . This striking result indicates that the proximity to a quantum critical point is crucial to the occurrence of a KQSR signal. (paper)

Ablating ErbB4 in PV neurons attenuates synaptic and cognitive deficits in an animal model of Alzheimer's disease.

Science.gov (United States)

Zhang, Heng; Zhang, Ling; Zhou, Dongming; He, Xiao; Wang, Dongpi; Pan, Hongyu; Zhang, Xiaoqin; Mei, Yufei; Qian, Qi; Zheng, Tingting; Jones, Frank E; Sun, Binggui

2017-10-01

Accumulation of amyloid β (Aβ) induces neuronal, synaptic, and cognitive deficits in patients and animal models of Alzheimer's disease (AD). The underlying mechanisms, however, remain to be fully elucidated. In the present study, we found that Aβ interacted with ErbB4, a member of the receptor tyrosine kinase family and mainly expressed in GABAergic interneurons. Deleting ErbB4 in parvalbumin-expressing neurons (PV neurons) significantly attenuated oligomeric Aβ-induced suppression of long term potentiation (LTP). Furthermore, specific ablation of ErbB4 in PV neurons via Cre/loxP system greatly improved spatial memory and synaptic plasticity in the hippocampus of hAPP-J20 mice. The deposition of Aβ detected by 3D6 and Thioflavin S staining and the proteolytic processing of hAPP analyzed by western blotting were not affected in the hippocampus of hAPP-J20 mice by deleting ErbB4 in PV neurons. Our data suggested that ErbB4 in PV neurons mediated Aβ-induced synaptic and cognitive dysfunctions without affecting Aβ levels. Copyright © 2017 Elsevier Inc. All rights reserved.

300 kWt core conceptual model thermal/hydraulic characteristics

International Nuclear Information System (INIS)

Moody, E.

1971-01-01

The 300 kW(t), 199 element NASA-Lewis/AEC core conceptual model, has been analyzed to determine it's thermal-hydraulic characteristics using the GEOM-3 code. Stack-ups of tolerances and fuel rod asymmetry patterns were used to ascertain cross element Δ T's. Both zoned and uniform spacing were analyzed with a somewhat lower fuel temperature and cross element ΔT found for zoned spacing. With the models considered, the core design appears adequate to limit thermal gradients to approximately 32 0 F. Bypass flow should be controlled to prevent excessive edge element ΔT's. 11 references. (U.S.)

40 CFR 600.109-78 - EPA driving cycles.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false EPA driving cycles. 600.109-78 Section... Model Year Automobiles-Test Procedures § 600.109-78 EPA driving cycles. (a) The driving cycle to be... driving cycle to be utilized for generation of the highway fuel economy data is specified in this...

10 CFR 600.200 - Purpose and scope of this subpart.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Purpose and scope of this subpart. 600.200 Section 600.200 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES Uniform Administrative Requirements for Grants and Cooperative Agreements to State and Local Governments General § 600...

(4bS,8aS-1-Isopropyl-4b,8,8-trimethyl-4b,5,6,7,8,8a,9,10-octahydrophenanthren-2-yl acetate

Directory of Open Access Journals (Sweden)

Radouane Oubabi

2014-03-01

Full Text Available The hemisynthesis of the title compound, C22H32O2, was carried out through direct acetylation reaction of the naturally occurring diterpene totarol [systematic name: (4bS,8aS-4b,8,8-trimethyl-1-propan-2-yl-5,6,7,8a,9,10-hexahydrophenanthren-2-ol]. The molecule is built up from three fused six membered rings, one saturated and two unsaturated. The central unsaturated ring has a half-chair conformation, whereas the other unsaturated ring displays a chair conformation. The absolute configuration is deduced from the chemical pathway. The value of the Hooft parameter [−0.10 (6] allowed this absolute configuration to be confirmed.

33 CFR 157.600 - Purpose and applicability.

Science.gov (United States)

2010-07-01

... (CONTINUED) POLLUTION RULES FOR THE PROTECTION OF THE MARINE ENVIRONMENT RELATING TO TANK VESSELS CARRYING...-Petroleum Oil § 157.600 Purpose and applicability. (a) The purpose of this subpart is to establish mandatory... non-petroleum oil. (b) This subpart applies to each tank vessel specified in § 157.01 of this part...

SU(3)xSU(2) color symmetry and Usub(B)(1)xSUsub(f)(4) quark model of hadrons

International Nuclear Information System (INIS)

Khrushchov, V.V.

1982-01-01

A quark model with a generalized color group SUsub(c)(3)xSU'sub(c)(2) is treated in the framework of the SUsub(f)(4)xUsub(B)(1) symnetry of strong interactions. The model contains twelve standard u, d, s, c quarks and new quarks belonging to representation 6 of the SU(4) group. The properties of new quarks are considered with respect to the color group and some properties of the exotic states, predicted by the model are presented

The CVD ZrB2 as a selective solar absorber

Science.gov (United States)

Randich, E.; Allred, D. D.

Coatings of ZrB2 and TiB2 for photothermal solar absorber applications were prepared using chemical vapor deposition (CVD) techniques. Oxidation tests suggest a maximum temperature limit for air exposure of 600 K for TiB2 and 800 K for Z4B2. Both materials exhibit innate spectral selectivity with emittance at 375 K ranging from 0.06 to 0.09 and solar absorptance for ZrB2 ranging from 0.67 to 0.77 and solar absorptance for TiB2 ranging from 0.46 to 0.58. ZrB2 has better solar selectivity and more desirable oxidation behavior than TiB2. A 0.071 micrometer antireflection coating of Si3N4 deposited on the ZrB2 coating leads to an increase in absorptance from 0.77 to 0.93, while the emittance remains unchanged.

10 CFR 600.311 - Standards for financial management systems.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Standards for financial management systems. 600.311... Requirements § 600.311 Standards for financial management systems. (a) Recipients are encouraged to use existing financial management systems to the extent that the systems comply with Generally Accepted...

10 CFR 600.121 - Standards for financial management systems.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Standards for financial management systems. 600.121... financial management systems. (a) Recipients shall relate financial data to performance data and develop....121(f) and 600.181, recipients' financial management systems shall provide for the following: (1...

Nuclear design for high temperature gas cooled reactor (GTHTR300C) using MOX fuel

International Nuclear Information System (INIS)

Mouri, Tomoaki; Kunitomi, Kazuhiko

2008-01-01

A design study of the hydrogen cogeneration high temperature gas cooled reactor (GTHTR300C) that can produce both electricity and hydrogen has been carried out in Japan Atomic Energy Agency. The GTHTR300C is the system with thermal power of 600MW and reactor outlet temperature of 950degC, which is expected to supply the hydrogen to fuel cell vehicles after 2020s. In future, the full deployment of fast reactor cycle without natural uranium will demand the use of Mixed-Oxide (MOX) fuels in the GTHTR300C. Therefore, a nuclear design was performed to confirm the feasibility of the reactor core using MOX fuels. The designed reactor core has high performance and meets safety requirements. In this paper, the outline of the GTHTR300C and the nuclear design of the reactor core using MOX fuels are described. (author)

Short syntheses of enantiopure calystegine B-2, B-3, and B-4

DEFF Research Database (Denmark)

Skaanderup, Philip Robert; Madsen, Robert

2001-01-01

Calystegine B-2 B-3, and B-4 have been prepared in 5 steps from the benzyl protected methyl 6-iodoglycopyranosides of glucose, galactose and mannose, respectively, by using a zinc-mediated domino reaction followed by ring-closing olefin metathesis as the key steps.......Calystegine B-2 B-3, and B-4 have been prepared in 5 steps from the benzyl protected methyl 6-iodoglycopyranosides of glucose, galactose and mannose, respectively, by using a zinc-mediated domino reaction followed by ring-closing olefin metathesis as the key steps....

Model of Dees and Rotco for the 600 MeV SC

CERN Multimedia

CERN PhotoLab

1978-01-01

The accelerating frequency of the 600 MeV Synchro-Cyclotron (SC) was modulated by the varying capacity of a rotating condenser ("Rotco", the most delicate component of the SC). A 1/5-scale model, dating from the design-period of the SC, was used to study improvements to the SC RF-system, and also the acceleration of ions, first Helium and, at the time of this picture, Carbon. In the middle of the picture is the case containing the Dees. To the left, at the wide end of the cone, a rotco. Reinhold Hohbach is busy with measurements. See also 7805235 (Annual Report 1978, p.110).

Ruling out exotic models of b quark decay

International Nuclear Information System (INIS)

Chen, A.; Goldberg, M.; Horwitz, N.; Jawahery, A.; Jibaly, M.; Kooy, H.; Lipari, P.; Moneti, G.C.; Van Hecke, H.; Alam, M.S.; Csorna, S.E.; Fridman, A.; Mestayer, M.; Panvini, R.S.; Andrews, D.; Avery, P.; Berkelman, K.; Cassel, D.G.; DeWire, J.W.; Ehrlich, R.; Ferguson, T.; Galik, R.; Gilchriese, M.G.D.; Gittelman, B.; Hartill, D.L.; Herrup, D.; Herzlinger, M.; Holner, S.; Ito, M.; Kandaswamy, J.; Kistiakowsky, V.; Kreinick, D.L.; Kubota, Y.; Mistry, N.B.; Morrow, F.; Nordberg, E.; Ogg, M.; Perchonok, R.; Plunckett, R.; Silverman, A.; Stein, P.C.; Stone, S.; Weber, D.; Wilcke, R.; Sadoff, A.J.; Bebek, C.; Haggerty, J.; Hassard, J.; Hempstead, M.; Izen, J.M.; MacKay, W.W.; Pipkin, F.M.; Rohlf, J.; Wilson, R.; Kagan, H.; Chadwick, K.; Chauveau, J.; Ganci, P.; Gentile, T.; Guida, J.A.; Kass, R.; Melissinos, A.C.; Olsen, S.L.; Parkhurst, G.; Poling, R.; Rosenfeld, C.; Rucinski, G.; Thorndike, E.H.; Green, J.; Hicks, R.G.; Sannes, F.; Skubic, P.; Snyder, A.; Stone, R.

1983-01-01

We consider three broad classes of nonstandard models for b quark decay: (1) b->llq with charged or neutral leptons of arbitrary flavor; (2) b->lanti qanti q; and (3) b->qa - where a - is a Higgs boson or hyperpion. For these classes of models we have calculated the charged energy fraction and the inclusive yields of electrons, muons, protons, and lambdas. We demonstrate that these model predictions are inconsistent with CLEO measurements at the T(4S). (orig.)

LASER APPLICATIONS AND OTHER TOPICS IN QUANTUM ELECTRONICS: Spectroscopy of V4+ and V3+ ions in a forsterite crystal

Science.gov (United States)

Veremeichik, T. F.; Gaister, A. V.; Zharikov, Evgeny V.; Protopopov, V. N.; Smirnov, Valerii A.; Subbotin, Kirill A.

2000-05-01

The absorption spectra of impurity vanadium ions in forsterite crystals are studied in the wavelength range from 600 to 2000 nm. It is found that the V4+ ion in the tetrahedral coordination in crystals grown by the Czochralski technique exhibits strong absorption in the range from 600 to 1200 nm. The intense electron-vibrational progressions in the absorption spectra of impurity d-ions in crystals were observed for the first time at temperatures 300 and 77 K. In the authors' opinion, these progressions appear due to the formation of the oxovanadate complex and distortions of the structural tetrahedron. The forsterite crystal doped with V4+ ions has a very high absorption cross section (up to 2.1×10-18 cm2) and a continuous broad absorption band, which makes this crystal promising as a passive laser switch in the range between 600 and 1200 nm. At the same time, the V4+ ions in the forsterite crystal do not emit luminescence because of a high probability of the nonradiative relaxation of their excited state. It is shown that luminescence of a V:Mg2SiO4 crystal is related to the tetrahedral V3+ ion.

Safety and risk assessments for the SNR 300

International Nuclear Information System (INIS)

Maschek, W.; Froehlich, R.; Jacobs, H.; Schikorr, M.; Heusener, G.; Caldarola, L.; Royl, P.; Struwe, D.

1983-01-01

Under the official inquiry ''Future Nuclear Energy Policies'', KfK have carried out a number of studies concerning the hazards arising from core-destructive accidents at the SNR-300 reactor. Among these, there was the so-called ''Upper Limit Study'' providing a critical evaluation of literature on all research done on core-destructive accidents (Bethe-Tait excursion) with a high mechanic energy release potential; the other one was the so-called ''SAI Study'' (a cooperation of KfK, Science Applications, Inc. (SAI) and Interatom (IA)) which investigated the hazards of an uncontrolled coolant flow rate disturbance occurring in the SNR-300 reactor. KfK also took part in the analysis of hazards comparing the SNR-300 reactor with an LWR-type reactor like the one at Biblis B, ordered by the Federal Ministry of Research and Technology (BMFT). These studies have already been dealt with KfK-Nachrichten, 14th annual set issue 4/1982. The article on hand summarizes and evaluates once more the most important results. (orig./RW) [de

Thermophysical properties of the ionic liquids [EMIM][B(CN)4] and [HMIM][B(CN)4].

Science.gov (United States)

Koller, Thomas M; Rausch, Michael H; Ramos, Javier; Schulz, Peter S; Wasserscheid, Peter; Economou, Ioannis G; Fröba, Andreas P

2013-07-18

In the present study, the thermophysical properties of the tetracyanoborate-based ionic liquids (ILs) 1-ethyl-3-methylimidazolium tetracyanoborate ([EMIM][B(CN)4]) and 1-hexyl-3-methylimidazolium tetracyanoborate ([HMIM][B(CN)4]) obtained by both experimental methods and molecular dynamics (MD) simulations are presented. Conventional experimental techniques were applied for the determination of refractive index, density, interfacial tension, and self-diffusion coefficients for [HMIM][B(CN)4] at atmospheric pressure in the temperature range from 283.15 to 363.15 K. In addition, surface light scattering (SLS) experiments provided accurate viscosity and interfacial tension data. As no complete molecular parametrization was available for the MD simulations of [HMIM][B(CN)4], our recently developed united-atom force field for [EMIM][B(CN)4] was partially transferred to the homologous IL [HMIM][B(CN)4]. Deviations between our simulated and experimental data for the equilibrium properties are less than ±0.3% in the case of density and less than ±8% in the case of interfacial tension for both ILs. Furthermore, the calculated and measured data for the transport properties viscosity and self-diffusion coefficient are in good agreement, with deviations of less than ±30% over the whole temperature range. In addition to a comparison with the literature, the influence of varying cation chain length on thermophysical properties of [EMIM][B(CN)4] and [HMIM][B(CN)4] is discussed.

33 CFR 207.600 - Rochester (Charlotte) Harbor, N.Y.; use, administration, and navigation.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Rochester (Charlotte) Harbor, N.Y.; use, administration, and navigation. 207.600 Section 207.600 Navigation and Navigable Waters CORPS OF... (Charlotte) Harbor, N.Y.; use, administration, and navigation. (a)-(b) [Reserved] (c) No vessel shall moor or...

40 CFR 600.113-78 - Fuel economy calculations.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Fuel economy calculations. 600.113-78... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1978 and Later Model Year Automobiles-Test Procedures § 600.113-78 Fuel economy calculations. The...

40 CFR 600.113-88 - Fuel economy calculations.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Fuel economy calculations. 600.113-88... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1978 and Later Model Year Automobiles-Test Procedures § 600.113-88 Fuel economy calculations. The...

40 CFR 600.113-93 - Fuel economy calculations.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Fuel economy calculations. 600.113-93... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1978 and Later Model Year Automobiles-Test Procedures § 600.113-93 Fuel economy calculations. The...

Characterization of B4C-composite-reinforced aluminum alloy composites

Science.gov (United States)

Singh, Ram; Rai, R. N.

2018-04-01

Dry sliding wear tests conducted on Pin-on-disk wear test machine. The rotational speed of disc is ranging from (400-600rpm) and under loads ranging from (30-70 N) the contact time between the disc and pin is constant for each pin specimen of composites is 15 minute. In all manufacturing industries the uses of composite materials has been increasing globally, In the present study, an aluminum 5083 alloy is used as the matrix and 5% of weight percentage of Boron Carbide (B4C) as the reinforcing material. The composite is produced using stir casting technique. This is cost effective method. The aluminum 5083 matrix can be strengthened by reinforcing with hard ceramic particles like silicon carbide and boron carbide. In this experiment, aluminum 5083 alloy is selected as one of main material for making parts of the ship it has good mechanical properties, good corrosion resistance and it is can welded very easily and does have good strength. The samples are tested for hardness and tensile strength. The mechanical properties like Hardness can be increased by reinforcing aluminum 5083alloy 5% boron carbide (B4C) particles and tensile strength. Finally the Scanning Electron Microscope (SEM) analysis and EDS is done, which helps to study topography of composites and it produces images of a sample by scanning it with a focused beam of electrons and the presence of composition found in the matrix.

MR diffusion weighted imaging of gastric cancer: b-value determination and comparison with routine sequences

International Nuclear Information System (INIS)

Zhao Xiaopeng; Tang Lei; Sun Yingshi; Li Jie; Cao Kun

2007-01-01

Objective: To choose the optimal b-values for the DWI of gastric cancer (GC), and investigate the value of DWI in the diagnosis of GCs. Methods: MRI examinations (T 1 WI, T 2 WI, and DWI) were performed on 31 patients with gastric cancer. Three diffusion-weighted sequences were designed with different b values, including 300 s/mm 2 (low), 600 s/mm 2 (intermediate), and 1000 s/mm 2 (high). Free water grade was used to evaluate the suppression of content in gastric lumen. Background contrast grade was used to evaluate the discriminating ability of different sequences between GC and nearby tissues. The ADCs of GCs, nearby gastric wall region, and free water in gastric lumen were measured. SNR Ca , CNR Ca-GW and SIR CaGW of high b-value DWI and routine MRI sequences were evaluated and compared. Results: The signal intensity of free water in gastric lumen decreased as b-value increased, and the SIR were 8.11± 0.77 (b=300 s/mm 2 ), 2.70±0.35 (b=600 s/mm 2 ), and 1.13±0.22 (b=1000 s/mm 2 ) (F55.368, P 2 =16.692, P 2 =9.923, P -3 mm 2 /s, (1.43±0.41) x 10 -3 mm 2 /s, and (1.18±0.25) x 10 -3 mm 2 /s; (F=12.066, P 1 WI (CNR: 12.46 vs. 2.35, Z=-3.746, P 2 WI (CNR: 12.46 vs. 3.92, Z=-3.518, P 2 ) is reasonable for DWI of GCs, which can reflect diffusion condition of water molecules more accurately, suppress signal of content in gastric lumen, and possess higher contrast. DWI can be a supplementary method of routine MRI examination for better demonstration of gastric cancers. (authors)

A 600 MeV cyclotron for radioactive beam production

International Nuclear Information System (INIS)

Clark, D.J.

1993-01-01

The magnetic field design for a 600 MeV proton cyclotron is described. The cyclotron has a single stage, a normal conducting magnet coil and a 9.8 m outside yoke diameter. It has 8 sectors, with a transition to 4 sectors in the center region. The magnetic field design was done using 1958 Harwell rectangular ridge system measurements and was compared with recent 3-dimensional field calculations with the program TOSCA at NSCL. The center region 4--8 sector transition focussing was also checked with TOSCA

77 FR 75833 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-12-26

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of...) for certain Airbus Model A300 B4-2C, B4-103, and B4-203 airplanes; and Model A300 B4-601, B4-603, B4... accordance with Airbus SB A300-57-6053 (Mod. 10453). Therefore and pending completion of the full analysis...

18 CFR 300.11 - Technical support for the rate schedule.

Science.gov (United States)

2010-04-01

... expenses; and (C) Replacements made during the historic period and replacements projected to be made during... replacement costs. (4) Statement D—Interest Expenses; Repayment of Investments and Debt Capital. (i) For each... the last five years of the historic period, as defined in section 300.1(b)(3); (ii) For the rate test...

10 CFR 600.135 - Supplies and other expendable property.

Science.gov (United States)

2010-01-01

... acquisition. If there is a residual inventory of unused supplies exceeding $5000 in total aggregate value upon... 10 Energy 4 2010-01-01 2010-01-01 false Supplies and other expendable property. 600.135 Section... Education, Hospitals, and Other Nonprofit Organizations Post-Award Requirements § 600.135 Supplies and other...

FLiNaK compatibility studies with Inconel 600 and silicon carbide

Energy Technology Data Exchange (ETDEWEB)

Yoder, Graydon L., E-mail: yodergljr@ornl.gov [Oak Ridge National Laboratory, Bldg. 5700, MS 6167 Bethel Valley Rd., Oak Ridge, TN 37831 (United States); Heatherly, Dennis; Wilson, Dane [Oak Ridge National Laboratory, Bldg. 5700, MS 6167 Bethel Valley Rd., Oak Ridge, TN 37831 (United States); Caja, Mario [Electrochemical Systems, Inc. (ESI), 9320 Collingwood Rd., Knoxville, TN 37922 (United States)

2016-10-15

Highlights: • A versatile experimental design has been developed to examine liquid fluoride salt materials compatibility behavior. • Samples of silicon carbide and a grafoil/nickel spiral wound gasket were exposed to FLiNaK salt at 700 °C for 90 days and showed no degradation. • Alloy 600 showed material effects penetrating up to 300 μm below the salt interface after exposure to the salt for 90 days at 700 °C. • Comparison of the Alloy 600 corrosion results with existing data indicated that results were comparable to the few corrosion results available for Alloy 600. • Sapphire viewing windows incorporated in the experiment showed fogging by condensed salt components at the highest test temperatures. - Abstract: A small liquid fluoride salt test apparatus has been constructed and testing has been conducted to examine the compatibility of silicon carbide (SiC), Inconel 600 and a spiral wound gasket material in FLiNaK, the ternary eutectic alkaline metal fluoride salt mixture. These tests were conducted to evaluate materials and sealing systems that could be used in fluoride salt systems. Three months of testing at 700 °C was conducted to assure that these materials and seals would be acceptable when operating under prototypic operating conditions. The SiC specimens showed little or no change over the test period, while the spiral wound gasket material did not show any degradation except that salt might have been seeping into the outermost spirals of the gasket. The Inconel 600 specimens showed regions of voiding which penetrated the specimen surface to about 250 μm in depth. Analysis indicated that the salt had leached chrome from the Inconel surface, as was expected for this material.

Inhalation Toxicology of Fog Oil Smoke

Science.gov (United States)

1986-12-01

PROLO) program (Russell et al., 1977). The 2.0-hr data suffered from heterogeneity of variance. The 6.0-hr data reflected too high an index of...CcwartiuLcWt fcrs, rtio lw x ur aptct Vtitv , klci utbhj" ctt. U S ft vtttltp 350 4) 3--0 Study AF J5--4 Study B 250 A-Combined Studies Aand B*. 150 1 300 -600

300-FF-1 remedial design report/remedial action work plan

Energy Technology Data Exchange (ETDEWEB)

Gustafson, F.W.

1997-02-01

The 300 Area has been divided into three operable units 300-FF-1, 300-FF-2, and 300-FF-5 all of which are in various stages of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) process. The 300-FF-1 Operable Unit, the subject of this report, includes liquid waste disposal sites, landfills, and a burial ground. This Remedial Design Report/Remedial Action Work Plan (RDR/RAWP) provides a summary description of each waste site included in the 300-FF-1 Operable Unit, the basis for remedial actions to be taken, and the remedial action approach and management process for implementing these actions. The remedial action approach and management sections provide a description of the remedial action process description, the project schedule, the project team, required planning documentation, the remedial action change process, the process for verifying attainment of the remedial action goals, and the required CERCLA and RCRA closeout documentation. Appendix A provides additional details on each waste site. In addition to remediation of the waste sites, waste generated during the remedial investigation/feasibility study portions of the project will also be disposed at the Environmental Restoration Disposal Facility (ERDF). Appendix B provides a summary of the modeling performed in the 300-FF-1 Phase 3 FS and a description of the modeling effort to be used to show attainment of the remedial action goals. Appendix C provides the sampling and analysis plan (SAP) for all sampling and field-screening activities performed during remediation and for verification of attainment with the remedial action goals. Appendix D provides the public involvement plan, prepared to ensure information is provided to the public during remedial design and remedial action processes.

300-FF-1 remedial design report/remedial action work plan

International Nuclear Information System (INIS)

Gustafson, F.W.

1997-02-01

The 300 Area has been divided into three operable units 300-FF-1, 300-FF-2, and 300-FF-5 all of which are in various stages of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) process. The 300-FF-1 Operable Unit, the subject of this report, includes liquid waste disposal sites, landfills, and a burial ground. This Remedial Design Report/Remedial Action Work Plan (RDR/RAWP) provides a summary description of each waste site included in the 300-FF-1 Operable Unit, the basis for remedial actions to be taken, and the remedial action approach and management process for implementing these actions. The remedial action approach and management sections provide a description of the remedial action process description, the project schedule, the project team, required planning documentation, the remedial action change process, the process for verifying attainment of the remedial action goals, and the required CERCLA and RCRA closeout documentation. Appendix A provides additional details on each waste site. In addition to remediation of the waste sites, waste generated during the remedial investigation/feasibility study portions of the project will also be disposed at the Environmental Restoration Disposal Facility (ERDF). Appendix B provides a summary of the modeling performed in the 300-FF-1 Phase 3 FS and a description of the modeling effort to be used to show attainment of the remedial action goals. Appendix C provides the sampling and analysis plan (SAP) for all sampling and field-screening activities performed during remediation and for verification of attainment with the remedial action goals. Appendix D provides the public involvement plan, prepared to ensure information is provided to the public during remedial design and remedial action processes

Stress Corrosion Cracking of alloy 600 in high temperature water: a study of mechanisms

International Nuclear Information System (INIS)

Boursier, J.M.; Bouvier, O. de; Gras, J.M.; Noel, D.; Vaillant, F.; Rios, R.

1992-12-01

Investigations of the stress corrosion cracking behaviour of Alloy 600 tubing in high temperature water were performed in order to get a precise knowledge of the different stages of the cracking and their dependence on various parameters. The compatibility of the results with the main mechanisms to be considered was examined. Results showed three stages in the cracking: a true incubation time, a slow-rate propagation period followed by a rapid-propagation stage. Tests separating stress and strain rate contributions show that the strain rate is the main parameter which controls the crack propagation. The hydrogen overpressure was found to increase the crack growth rate up to 1-4 bar, but a strong decrease is observed from 4 to 20 bar. Analysis of the hydrogen ingress in the metal showed that it is neither correlated to the hydrogen overpressure nor to the severity of cracking; so cracking resulting from an hydrogen-model is unlikely. No detrimental effect of oxygen (4 bar) was noticed both in the mill-annealed and the sensitized conditions. Finally, none of the classical mechanisms, neither hydrogen-assisted cracking nor slip-step dissolution, can correctly describe the observed behaviour. Some fractographic examinations, and an influence of primary water on the creep rate of Alloy 600, lead to consider that other recent mechanisms, involving an interaction between dissolution and plasticity, have to be considered

Effect of hot-dip galvanizing processes on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel

Science.gov (United States)

Kuang, Chun-fu; Zheng, Zhi-wang; Wang, Min-li; Xu, Quan; Zhang, Shen-gen

2017-12-01

A C-Mn dual-phase steel was soaked at 800°C for 90 s and then either rapidly cooled to 450°C and held for 30 s (process A) or rapidly cooled to 350°C and then reheated to 450°C (process B) to simulate the hot-dip galvanizing process. The influence of the hot-dip galvanizing process on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel (DP600) was investigated using optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and tensile tests. The results showed that, in the case of process A, the microstructure of DP600 was composed of ferrite, martensite, and a small amount of bainite. The granular bainite was formed in the hot-dip galvanizing stage, and martensite islands were formed in the final cooling stage after hot-dip galvanizing. By contrast, in the case of process B, the microstructure of the DP600 was composed of ferrite, martensite, bainite, and cementite. In addition, compared with the yield strength (YS) of the DP600 annealed by process A, that for the DP600 annealed by process B increased by approximately 50 MPa because of the tempering of the martensite formed during rapid cooling. The work-hardening coefficient ( n value) of the DP600 steel annealed by process B clearly decreased because the increase of the YS affected the computation result for the n value. However, the ultimate tensile strength (UTS) and elongation ( A 80) of the DP600 annealed by process B exhibited less variation compared with those of the DP600 annealed by process A. Therefore, DP600 with excellent comprehensive mechanical properties (YS = 362 MPa, UTS = 638 MPa, A 80 = 24.3%, n = 0.17) was obtained via process A.

10 CFR 600.340 - Purpose of reports and records.

Science.gov (United States)

2010-01-01

... and reporting financial and program performance and for records retention. ... 10 Energy 4 2010-01-01 2010-01-01 false Purpose of reports and records. 600.340 Section 600.340 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES Administrative...

P300 change and cognitive behavioral therapy in subjects with Internet addiction disorder A 3-month follow-up study

Institute of Scientific and Technical Information of China (English)

Ling Ge; Xiuchun Ge; Yong Xu; Kerang Zhang; Jing Zhao; Xin Kong

2011-01-01

Event-related potential studies of cognitive function in addiction behaviors have focused on the P300 event-related potential component. The current study investigated the association between P300 component and Internet addiction disorder. We found that individuals with Internet addiction disorder exhibited significantly longer P300 latencies than controls (N2: P = 0.035; P3a: P = 0.031; P3b: P = 0.043) and similar P300 amplitudes compared to control participants. After 3 months of cognitive behavioral therapy, P300 latencies decreased significantly in the P3a and P3b (P3a: P = 0.045; P3b: P = 0.062). These results suggest that deficits in cognitive function may be involved in Internet addiction disorder, and that clinical psychological treatment may be effective.

A new hybrid BCI paradigm based on P300 and SSVEP.

Science.gov (United States)

Wang, Minjue; Daly, Ian; Allison, Brendan Z; Jin, Jing; Zhang, Yu; Chen, Lanlan; Wang, Xingyu

2015-04-15

P300 and steady-state visual evoked potential (SSVEP) approaches have been widely used for brain-computer interface (BCI) systems. However, neither of these approaches can work for all subjects. Some groups have reported that a hybrid BCI that combines two or more approaches might provide BCI functionality to more users. Hybrid P300/SSVEP BCIs have only recently been developed and validated, and very few avenues to improve performance have been explored. The present study compares an established hybrid P300/SSVEP BCIs paradigm to a new paradigm in which shape changing, instead of color changing, is adopted for P300 evocation to decrease the degradation on SSVEP strength. The result shows that the new hybrid paradigm presented in this paper yields much better performance than the normal hybrid paradigm. A performance increase of nearly 20% in SSVEP classification is achieved using the new hybrid paradigm in comparison with the normal hybrid paradigm. All the paradigms except the normal hybrid paradigm used in this paper obtain 100% accuracy in P300 classification. The new hybrid P300/SSVEP BCIs paradigm in which shape changing, instead of color changing, could obtain as high classification accuracy of SSVEP as the traditional SSVEP paradigm and could obtain as high classification accuracy of P300 as the traditional P300 paradigm. P300 did not interfere with the SSVEP response using the new hybrid paradigm presented in this paper, which was superior to the normal hybrid P300/SSVEP paradigm. Copyright © 2014 Elsevier B.V. All rights reserved.

SEIR model simulation for Hepatitis B

Science.gov (United States)

Side, Syafruddin; Irwan, Mulbar, Usman; Sanusi, Wahidah

2017-09-01

Mathematical modelling and simulation for Hepatitis B discuss in this paper. Population devided by four variables, namely: Susceptible, Exposed, Infected and Recovered (SEIR). Several factors affect the population in this model is vaccination, immigration and emigration that occurred in the population. SEIR Model obtained Ordinary Differential Equation (ODE) non-linear System 4-D which then reduces to 3-D. SEIR model simulation undertaken to predict the number of Hepatitis B cases. The results of the simulation indicates the number of Hepatitis B cases will increase and then decrease for several months. The result of simulation using the number of case in Makassar also found the basic reproduction number less than one, that means, Makassar city is not an endemic area of Hepatitis B.

Toxicological Effects of Nickel Chloride on IgA+ B Cells and sIgA, IgA, IgG, IgM in the Intestinal Mucosal Immunity in Broilers

Directory of Open Access Journals (Sweden)

Bangyuan Wu

2014-08-01

Full Text Available The objective of this study was to investigate the toxicological effects of dietary NiCl2 on IgA+ B cells and the immunoglobulins including sIgA, IgA, IgG and IgM in the small intestine and cecal tonsil of broilers by the methods of immunohistochemistry and enzyme-linked immunosorbent assay (ELISA. Two hundred and forty one-day-old avian broilers were randomly divided into four groups and fed on a control diet and three experimental diets supplemented with 300, 600, and 900 mg/kg NiCl2 for 42 days. Compared with the control group, the IgA+ B cell number and the sIgA, IgA, IgG, and IgM contents in the NiCl2-treated groups were significantly decreased (p < 0.05 or p < 0.01. It was concluded that dietary NiCl2 in the excess of 300 mg/kg had negative effects on the IgA+ B cell number and the abovementioned immunoglobulin contents in the small intestine and the cecal tonsil. NiCl2-reduced sIgA, IgA, IgG and IgM contents is due to decrease in the population and/or the activation of B cell. The results suggest that NiCl2 at high levels has intestinal mucosal humoral immunotoxicity in animals.

Recording visual evoked potentials and auditory evoked P300 at 9.4T static magnetic field.

Science.gov (United States)

Arrubla, Jorge; Neuner, Irene; Hahn, David; Boers, Frank; Shah, N Jon

2013-01-01

Simultaneous recording of electroencephalography (EEG) and functional magnetic resonance imaging (fMRI) has shown a number of advantages that make this multimodal technique superior to fMRI alone. The feasibility of recording EEG at ultra-high static magnetic field up to 9.4 T was recently demonstrated and promises to be implemented soon in fMRI studies at ultra high magnetic fields. Recording visual evoked potentials are expected to be amongst the most simple for simultaneous EEG/fMRI at ultra-high magnetic field due to the easy assessment of the visual cortex. Auditory evoked P300 measurements are of interest since it is believed that they represent the earliest stage of cognitive processing. In this study, we investigate the feasibility of recording visual evoked potentials and auditory evoked P300 in a 9.4 T static magnetic field. For this purpose, EEG data were recorded from 26 healthy volunteers inside a 9.4 T MR scanner using a 32-channel MR compatible EEG system. Visual stimulation and auditory oddball paradigm were presented in order to elicit evoked related potentials (ERP). Recordings made outside the scanner were performed using the same stimuli and EEG system for comparison purposes. We were able to retrieve visual P100 and auditory P300 evoked potentials at 9.4 T static magnetic field after correction of the ballistocardiogram artefact using independent component analysis. The latencies of the ERPs recorded at 9.4 T were not different from those recorded at 0 T. The amplitudes of ERPs were higher at 9.4 T when compared to recordings at 0 T. Nevertheless, it seems that the increased amplitudes of the ERPs are due to the effect of the ultra-high field on the EEG recording system rather than alteration in the intrinsic processes that generate the electrophysiological responses.

Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment

Energy Technology Data Exchange (ETDEWEB)

Taniguchi, Naoya, E-mail: tani110@kuhp.kyoto-u.ac.jp [Department of Orthopaedic Surgery, Kyoto University Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo, Kyoto 606-8507 (Japan); Fujibayashi, Shunsuke, E-mail: shfuji@kuhp.kyoto-u.ac.jp [Department of Orthopaedic Surgery, Kyoto University Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo, Kyoto 606-8507 (Japan); Takemoto, Mitsuru, E-mail: m.take@kuhp.kyoto-u.ac.jp [Department of Orthopaedic Surgery, Kyoto University Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo, Kyoto 606-8507 (Japan); Sasaki, Kiyoyuki, E-mail: kiy-sasaki@spcom.co.jp [Sagawa Printing Co., Ltd., 5-3, Inui, Morimoto-Cho, Mukou-Shi, Kyoto 617-8588 (Japan); Otsuki, Bungo, E-mail: bungo@kuhp.kyoto-u.ac.jp [Department of Orthopaedic Surgery, Kyoto University Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo, Kyoto 606-8507 (Japan); Nakamura, Takashi, E-mail: ntaka@kuhp.kyoto-u.ac.jp [National Hospital Organization Kyoto Medical Center, 1-1, Mukaihatacho, Hukakusa, Hushimi, Kyoto 612-8555 (Japan); Matsushita, Tomiharu, E-mail: matsushi@isc.chubu.ac.jp [Department of Biomedical Sciences, College of Life and Health Sciences, Chubu University, 1200 Matsumoto-cho, Kasugai, Aichi 487-8501 (Japan); Kokubo, Tadashi, E-mail: kokubo@isc.chubu.ac.jp [Department of Biomedical Sciences, College of Life and Health Sciences, Chubu University, 1200 Matsumoto-cho, Kasugai, Aichi 487-8501 (Japan); Matsuda, Shuichi, E-mail: smat522@kuhp.kyoto-u.ac.jp [Department of Orthopaedic Surgery, Kyoto University Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo, Kyoto 606-8507 (Japan)

2016-02-01

Selective laser melting (SLM) is an additive manufacturing technique with the ability to produce metallic scaffolds with accurately controlled pore size, porosity, and interconnectivity for orthopedic applications. However, the optimal pore structure of porous titanium manufactured by SLM remains unclear. In this study, we evaluated the effect of pore size with constant porosity on in vivo bone ingrowth in rabbits into porous titanium implants manufactured by SLM. Three porous titanium implants (with an intended porosity of 65% and pore sizes of 300, 600, and 900 μm, designated the P300, P600, and P900 implants, respectively) were manufactured by SLM. A diamond lattice was adapted as the basic structure. Their porous structures were evaluated and verified using microfocus X-ray computed tomography. Their bone–implant fixation ability was evaluated by their implantation as porous-surfaced titanium plates into the cortical bone of the rabbit tibia. Bone ingrowth was evaluated by their implantation as cylindrical porous titanium implants into the cancellous bone of the rabbit femur for 2, 4, and 8 weeks. The average pore sizes of the P300, P600, and P900 implants were 309, 632, and 956 μm, respectively. The P600 implant demonstrated a significantly higher fixation ability at 2 weeks than the other implants. After 4 weeks, all models had sufficiently high fixation ability in a detaching test. Bone ingrowth into the P300 implant was lower than into the other implants at 4 weeks. Because of its appropriate mechanical strength, high fixation ability, and rapid bone ingrowth, our results indicate that the pore structure of the P600 implant is a suitable porous structure for orthopedic implants manufactured by SLM. - Highlights: • We studied the effect of pore size on bone tissue in-growth in a rabbit in vivo model. • Titanium samples with 300/600/900 μm pore size in three-dimensionally controlled shapes were fabricated by additive manufacturing. • Samples were

Thermal expansion studies on Inconel-600[reg] by high temperature X-ray diffraction

International Nuclear Information System (INIS)

Raju, S.; Sivasubramanian, K.; Divakar, R.; Panneerselvam, G.; Banerjee, A.; Mohandas, E.; Antony, M.P.

2004-01-01

The lattice thermal expansion characteristics of Inconel-600[reg] have been studied by high temperature X-ray diffraction (HT-XRD) technique in the temperature range 298-1200 K. Altogether four experimental runs were conducted on thin foils of about 75-100 μm thickness. The diffraction profiles have been accurately calibrated to offset the shift in 2θ values introduced by sample buckling at elevated temperatures. The corrected lattice parameter data have been used to estimate the instantaneous and mean linear thermal expansion coefficients as a function of temperature. The thermal expansion values estimated in the present study show a fair degree of agreement with other existing dilatometer based bulk thermal expansion estimates. The lattice parameter for this alloy at 300 K is found to be 0.3549(1) nm. The mean linear thermal expansivity is found to be 11.4 x 10 -6 K -1

300 Area D4 Project 2nd Quarter FY06 Building Completion Report

International Nuclear Information System (INIS)

Smith, David S.

2006-01-01

This report documents the deactivation, decontamination, decommissioning, and demolition of 16 buildings in the 300 Area of the Hanford Site. The D4 of these facilities included characterization, engineering, removal of hazardous and radiologically contaminated materials, equipment removal, utility disconnection, deactivation, decontamination, demolition of the structure, and stabilization or removal of the remaining slab and foundation as appropriate.

50 CFR 600.805 - Purpose and scope.

Science.gov (United States)

2010-10-01

..., DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Essential Fish Habitat (EFH) § 600.805 Purpose and... enhance EFH. (b) Scope—(1) Species covered. An EFH provision in an FMP must include all fish species in the fishery management unit (FMU). An FMP may describe, identify, and protect the habitat of species...

Depleted Reactor Analysis With MCNP-4B

International Nuclear Information System (INIS)

Caner, M.; Silverman, L.; Bettan, M.

2004-01-01

Monte Carlo neutronics calculations are mostly done for fresh reactor cores. There is today an ongoing activity in the development of Monte Carlo plus burnup code systems made possible by the fast gains in computer processor speeds. In this work we investigate the use of MCNP-4B for the calculation of a depleted core of the Soreq reactor (IRR-1). The number densities as function of burnup were taken from the WIMS-D/4 cell code calculations. This particular code coupling has been implemented before. The Monte Carlo code MCNP-4B calculates the coupled transport of neutrons and photons for complicated geometries. We have done neutronics calculations of the IRR-1 core with the WIMS and CITATION codes in the past Also, we have developed an MCNP model of the IRR-1 standard fuel for a criticality safety calculation of a spent fuel storage pool

MEK-ERK inhibition potentiates WAY-600-induced anti-cancer efficiency in preclinical hepatocellular carcinoma (HCC) models

Energy Technology Data Exchange (ETDEWEB)

Wang, Kaifeng, E-mail: kaifeng_wangdr@sina.com [Cancer center, the Affiliated Hospital of Hangzhou Normal University, Hangzhou (China); Fan, Yaohua [Oncology Department, No. 1 Hospital of Jiaxing, Zhejiang Province, Jiaxing (China); Chen, Gongying [Oncology Department, The Affiliated Hospital Hangzhou Normal University, Hangzhou (China); Wang, Zhengrong [Taizhou Hospital, Zhejiang Province, Taizhou (China); Kong, Dexin; Zhang, Peng [Oncology Department, Sir Run Run Shaw Hospital, Medical School, Zhejiang University, Hangzhou (China)

2016-05-27

The search for novel anti-hepatocellular carcinoma (HCC) agents is important. Mammalian target of rapamycin (mTOR) hyper-activation plays a pivotal role in promoting HCC tumorigenesis and chemoresistance. The current preclinical study evaluated the potential anti-HCC activity by a potent mTOR kinase inhibitor, WAY-600. We showed that WAY-600 inhibited survival and proliferation of HCC cell lines (HepG2 and Huh7) and primary human HCC cells. Caspase-dependent apoptosis was activated by WAY-600 in above HCC cells. Reversely, caspase inhibitors largely attenuated WAY-600's lethality against HCC cells. At the signaling level, WAY-600 blocked mTOR complex 1/2 (mTORC1/2) assemble and activation, yet activated MEK-ERK pathway in HCC cells. MEK-ERK inhibitors, PD-98059 and MEK-162, or MEK1/2 shRNA significantly potentiated WAY-600's cytotoxicity in HCC cells. Further studies showed that WAY-600 intraperitoneal (i.p.) administration in nude mice inhibited p-AKT Ser-473 and displayed significant anti-cancer activity against HepG2 xenografts. Remarkably, co-administration of MEK-162 further potentiated WAY-600's anti-HCC activity in vivo. These preclinical results demonstrate the potent anti-HCC activity by WAY-600, either alone or with MEK-ERK inhibitors. -- Highlights: •WAY-600 inhibits HCC cell survival and proliferation in vitro. •WAY-600 activates caspase-dependent apoptosis in HCC cells. •WAY-600 blocks mTORC1/2 activation, but activates MEK-ERK in HCC cells. •MEK-ERK inhibitors or MEK1/2 shRNA enhances WAY-600's cytotoxicity against HCC cells. •MEK-162 co-administration potentiates WAY-600-induced the anti-HepG2 tumor efficacy.

A study on the cerebral dominance and the origin of P300 using acoustic P300 and single photon emission computed tomography in normal volunteers

International Nuclear Information System (INIS)

Sato, Kenichi

1994-01-01

P300 is one of the late positive component of event related potentials. Its latency is around 300 ms following in frequent stimuli. P300 components are evident only in response to the target stimuli and are thought to reflect the speed of stimulus evaluation and categorization. Thus, abnormalities of P300 component may be expected in disorders which are characterised by cognitive slowing. Recently, P300 has been used in the assessment of cognitive function for many diseases such as dementia or cerebrovascular disease. However, the origin of P300 is still unknown. In this study, to investigate the superiority of hemisphere and the origin of P300, P300 assessment and SPECT were performed in normal subjects. An auditory oddball paradigm was used to elicit the P300 components in 40 normal volunteers (15 to 77 years). P300 peak latency and peak-to-peak amplitude of N200 and P300 were measured from Cz (midline), C3 (left side), and C4 (right side) using the International 10-20 System. 123 I-IMP-SPECT was studied in 7 normal volunteers (26 to 56 years) in conjunction with auditory P300 stimulation. Right-Left ratios of count rates of both hemispheres and ROI (region of interest) setting in frontal lobe, temporal lobe, basal ganglia, and cerebellum were calculated, and the following results were obtained. P300 latency was significantly decreased in Cz and C4 compared with C3. P300 amplitude was significantly increased in Cz and C4 compared with C3. Cerebral blood flow increase in the right hemisphere was observed in 5 of the 7 subjects that underwent auditory P300 stimulation. Right-Left ratio of count rates showed over 1 in the temporal lobe and basal ganglia. The above results suggested that auditory P300 showed right hemisphere superiority, and that the temporal lobe and basal ganglia may be especially important to the origin of P300. (author)

A General Model of the Atmospheric Scattering in the Wavelength Interval 300 - 1100nm

Directory of Open Access Journals (Sweden)

K. Dimitrov

2009-12-01

Full Text Available We have presented and developed new theoretic-empirical models of the extinction coefficients of the molecular scattering in the lower, close to the ground troposphere. We have included the indicatrices of backscattering. The models have been presented using general analytical functions valid for the whole wavelength interval 300-1100 nm and for the whole interval of visibility from 0.1 km up to 50 km. The results have been compared in quantity with the model and experimental data of other authors. The modeling of troposphere scattering is necessary for the analysis and design of all optoelectronic free space systems: atmospheric optical communication systems, location systems for atmospheric research (LIDAR, optical radiometric systems.

Localization of the native Chinese speakers language cortex by magnetic source imaging

International Nuclear Information System (INIS)

Sun Jilin; Wu Jie; Li Sumin; Wu Jing; Zhao Huadong; Wu Yujin; Liu Lianxiang

2003-01-01

Objective: To localize the language cortex associated with Chinese word processing by magnetic source imaging (MSI). Methods: Eight right handed and one left handed healthy native Chinese speakers, including 5 men and 4 women, aged from 14 to 32 years, were examined by magnetoencephalography (MEG) and 1.5 T MR unit. All subjects were given 50 times pure tone stimuli (intensity was 80 dB sound pressure level), then 150 pairs of Chinese words (the meaning of the words was related or not related) auditory stimuli (intensity was 80 dB sound pressure level), and then 50 times pure tone stimuli at last (intensity was 80 dB sound pressure level). Evoked response fields (ERFs) time locked to the pure tone and Chinese words were recorded in a magnetically shielded room using a whole-head neuromagnetometer (Model Vectorview 306, made by 4-D Neuroimaging company, Finland) in real-time. The acquired data were averaged by the acquisition computer according to the response to the pure tone, related pairs of words and not related pairs of words. The data obtained by the MEG could be superimposed on MRI. Results: There were two obvious higher magnetic waves named M50 and M100 (two peaks occurred about 50 ms and 100 ms after giving the subjects binaurally stimuli). M50 and M100 in all subjects were localized in the bilateral transverse temporal gyri. The responses to the pairs of Chinese words (the meaning of the words was related or not related) were similar in the same hemisphere of the same subjects. There was a higher peak during 300-600 ms in the right hemisphere in the left handed subject, but there was no peak during 300-600 ms in his left hemisphere. It indicated that the language dominant hemisphere localized in the right hemisphere. Superimposing the MEG data on MRI, the language area was localized in the Wernicke's areas. There were two 300-600 ms response peaks in the bilateral hemispheres (the amplitude of the 300-600 ms response peaks in the bilateral hemisphere was

Search for space charge effects in the ICARUS T600 LAr-TPC

Science.gov (United States)

Torti, Marta

2016-11-01

Space charge in Liquid Argon Time Projection Chamber is due to the accumu- lation of positive ions, produced by ionizing tracks crossing the detector, which slowly flow toward the cathode. As a consequence, electric field distortions may arise, thus hindering the possibility to produce faithful 3D images of the ionizing events. The presence of space charge becomes relevant for large TPCs operating at surface or at shallow depths, where cosmic ray flux is high. These effects could interest the next phase of the ICARUS T600 detector, which will be deployed at shallow depths as a Far Detector for Short Baseline Neutrino experiment at FNAL dedicated to sterile neutrino searches. In 2001, the first ICARUS T600 module (T300) operated at surface in Pavia (Italy), recording cosmic ray data. In this work, a sample of cosmic muon tracks from the 2001 run was analyzed and results on space charge effects in LAr-TPCs are shown.

Search for space charge effects in the ICARUS T600 LAr-TPC

International Nuclear Information System (INIS)

Torti, Marta

2016-01-01

Space charge in Liquid Argon Time Projection Chamber is due to the accumu- lation of positive ions, produced by ionizing tracks crossing the detector, which slowly flow toward the cathode. As a consequence, electric field distortions may arise, thus hindering the possibility to produce faithful 3D images of the ionizing events. The presence of space charge becomes relevant for large TPCs operating at surface or at shallow depths, where cosmic ray flux is high. These effects could interest the next phase of the ICARUS T600 detector, which will be deployed at shallow depths as a Far Detector for Short Baseline Neutrino experiment at FNAL dedicated to sterile neutrino searches. In 2001, the first ICARUS T600 module (T300) operated at surface in Pavia (Italy), recording cosmic ray data. In this work, a sample of cosmic muon tracks from the 2001 run was analyzed and results on space charge effects in LAr-TPCs are shown

DESIGNING STUDY FOR A FAMILY FARM WITH 600 GOATS

Directory of Open Access Journals (Sweden)

I. PĂDEANU

2007-10-01

Full Text Available In the hilly and plains area of Banat region, goat rearing for milk production haschances to become a profitable business. After Romania integration into the EUmarket there will be no quotas for goat milk and meat production. Also, importantlow-production arable land areas (over 3 million hectares will be laying fallow inthe next years, spectacularly increasing the fodder area for ruminants. There a fewgoat family farms having an efficient technological flow and with possibilities toprocess the milk in Romania. In this paper the bases are laid down for projecting afarm with 600 indigenous goats, to be exploited in an intensive system andgenetically improved with Sannen or French Alpine he-goats. The followingreproduction indices were planned for the 600 goats: goats in estrus per season96%, fecundity 95%, goats that keep the pregnancy 98%, kidding goats 90%,prolificacy 170%, and birth rate 152 kids for 100 dam goats. The total populationafter weaning the kids is 600 goats, 24 he-goats, and 173 reproduction female kids.For feeding this population 66.8 ha are required out of which 43.1 ha with grassespasture, 2.1 ha alfalfa, 10.2 ha corn, 4.2 ha barley, and 6.6 ha oats. Goats arehoused in 4 shelters, in 12 group pens of 48 heads. Goats will be fed year-round withgrass haylage, oats straw and concentrate mixtures. This farm will produce 2250 Hlmilk per year (mechanical milking, 150 reproduction female kids for selling at 8-9months of age, 500 fattening kids, and 120 culled goats sold for meat. The annuallyestimated gross income will be 34000 EUR.

10 CFR 600.150 - Purpose of reports and records.

Science.gov (United States)

2010-01-01

... recipient's financial and program performance and the necessary standard reporting forms. They also set... 10 Energy 4 2010-01-01 2010-01-01 false Purpose of reports and records. 600.150 Section 600.150 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES Uniform...

29 CFR 1471.600 - How do suspension and debarment actions start?

Science.gov (United States)

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false How do suspension and debarment actions start? 1471.600 Section 1471.600 Labor Regulations Relating to Labor (Continued) FEDERAL MEDIATION AND CONCILIATION... and Debarment Actions § 1471.600 How do suspension and debarment actions start? When we receive...

46 CFR 116.300 - Structural design.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Structural design. 116.300 Section 116.300 Shipping... Structure § 116.300 Structural design. Except as otherwise allowed by this subpart, a vessel must comply with the structural design requirements of one of the standards listed below for the hull material of...

46 CFR 175.600 - Incorporation by reference.

Science.gov (United States)

2010-10-01

... Vessels Under 61 Meters (200 feet) in Length, 1983 (“ABS Steel Vessel Rules (Meters)”) 177.300. Rules..., Standard Practice for Operating Salt Spray (Fog) Apparatus (“ASTM B 117”) 175.400. ASTM B 122/B 122M-95... (“ASTM D 93”) 175.400. ASTM D 635-97, Standard test Method for Rate of Burning and or Extent and Time of...

76 FR 72858 - Airworthiness Directives; The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500...

Science.gov (United States)

2011-11-28

... Model 737-100, -200, -300, -400, and -500 series airplanes, a one-time detailed inspection is added to... Information Initial Compliance Time (i) For all Model 737-100, -200, -200C, -300, -400, and -500 series... by paragraph (r) of this AD. If any fastener is missing, before further flight, repair using a method...

Modelling of zircaloy-4 corrosion in nitrogen and oxygen mixtures at high temperature

International Nuclear Information System (INIS)

Lasserre, M.; Peres, V.; Pijolat, M.; Coindreau, O.; Duriez, C.; Mardon, J.P.

2015-01-01

Previous studies of zircaloy-4 corrosion in air have shown accelerated corrosion in the 600-1000 Celsius degrees temperature range with Zr nitrides precipitating near the metal/oxide surface. The aim of this series of slides is to assess the influence of N 2 and O 2 partial pressures on the kinetic rate of growth of a new phase and to propose a kinetic modelling of zircaloy-4 corrosion

10 CFR 300.7 - Net emission reductions.

Science.gov (United States)

2010-01-01

... the likely direct and indirect effects of the actions taken to reduce greenhouse gas emissions. (d... DEPARTMENT OF ENERGY CLIMATE CHANGE VOLUNTARY GREENHOUSE GAS REPORTING PROGRAM: GENERAL GUIDELINES § 300.7... gases listed in the definition of “greenhouse gases” in § 300.2 are eligible for registration. (b...

Predictive methodology to address PWSCC of Alloy 600 locations in PWRS

International Nuclear Information System (INIS)

Rao, G.V.

1992-01-01

Contributing factors to primary water stress corrosion cracking (PWSCC) are susceptible microstructure, temperature, and residual and applied stresses. In order to predict PWSCC of Inconel 600 components in PWR type reactors, a number of steps were taken. All Inconel 600 components were located, fabrication history, weld procedures and material properties were identified. Service temperatures and approximate stresses were determined. Precise service stress evaluations of Inconel 600 locations by Finite Element and other analytical evaluations were made. Using data analysis, relative PWSCC susceptibility evaluations of Inconel 600 locations were made on the basis of the Westinghouse RSI model. Finally, a prioritized inspection plan for Inconel 600 locations was developed and recommendations provided. 11 figs., 2 tabs

Optimization of two-phase R600a ejector geometries using a non-equilibrium CFD model

International Nuclear Information System (INIS)

Lee, Moon Soo; Lee, Hoseong; Hwang, Yunho; Radermacher, Reinhard; Jeong, Hee-Moon

2016-01-01

Highlights: • Empirical mass transfer coefficient correlation is built based on Weber number. • Developed model is validated in terms of the e and DP. • A set of Pareto solutions is obtained from MOGA based OAAO method. • DP is improved up to 10,379 Pa with the same e of the baseline. • e is enhanced up to 0.782 with the same DP of the baseline case. - Abstract: A vapor compression cycle, which is typically utilized for the heat pump, air conditioning and refrigeration systems, has inherent thermodynamic losses associated with expansion and compression processes. To minimize these losses and improve the energy efficiency of the vapor compression cycle, an ejector can be applied. However, due to the occurrence of complex physics i.e., non-equilibrium flashing compressible flow in the nozzle with possible shock interactions, it has not been feasible to model or optimize the design of a two-phase ejector. In this study, a homogeneous, non-equilibrium, two-phase flow computational fluid dynamics (CFD) model in a commercial code is used with an in-house empirical correlation for the mass transfer coefficient and real gas properties to perform a geometric optimization of a two-phase ejector. The model is first validated with experimental data of an ejector with R600a as the working fluid. After that, the design parameters of the ejector are optimized using multi-objective genetic algorithm (MOGA) based online approximation-assisted optimization (OAAO) approaches to find the maximum performance.

Estimating the Cost-Effectiveness of HIV Prevention Programmes in Vietnam, 2006-2010: A Modelling Study.

Directory of Open Access Journals (Sweden)

Quang Duy Pham

Full Text Available Vietnam has been largely reliant on international support in its HIV response. Over 2006-2010, a total of US$480 million was invested in its HIV programmes, more than 70% of which came from international sources. This study investigates the potential epidemiological impacts of these programmes and their cost-effectiveness.We conducted a data synthesis of HIV programming, spending, epidemiological, and clinical outcomes. Counterfactual scenarios were defined based on assumed programme coverage and behaviours had the programmes not been implemented. An epidemiological model, calibrated to reflect the actual epidemiological trends, was used to estimate plausible ranges of programme impacts. The model was then used to estimate the costs per averted infection, death, and disability adjusted life-year (DALY.Based on observed prevalence reductions amongst most population groups, and plausible counterfactuals, modelling suggested that antiretroviral therapy (ART and prevention programmes over 2006-2010 have averted an estimated 50,600 [95% uncertainty bound: 36,300-68,900] new infections and 42,600 [36,100-54,100] deaths, resulting in 401,600 [312,200-496,300] fewer DALYs across all population groups. HIV programmes in Vietnam have cost an estimated US$1,972 [1,447-2,747], US$2,344 [1,843-2,765], and US$248 [201-319] for each averted infection, death, and DALY, respectively.Our evaluation suggests that HIV programmes in Vietnam have most likely had benefits that are cost-effective. ART and direct HIV prevention were the most cost-effective interventions in reducing HIV disease burden.

Estimating the Cost-Effectiveness of HIV Prevention Programmes in Vietnam, 2006-2010: A Modelling Study

Science.gov (United States)

Pham, Quang Duy; Wilson, David P.; Kerr, Cliff C.; Shattock, Andrew J.; Do, Hoa Mai; Duong, Anh Thuy; Nguyen, Long Thanh; Zhang, Lei

2015-01-01

Introduction Vietnam has been largely reliant on international support in its HIV response. Over 2006-2010, a total of US$480 million was invested in its HIV programmes, more than 70% of which came from international sources. This study investigates the potential epidemiological impacts of these programmes and their cost-effectiveness. Methods We conducted a data synthesis of HIV programming, spending, epidemiological, and clinical outcomes. Counterfactual scenarios were defined based on assumed programme coverage and behaviours had the programmes not been implemented. An epidemiological model, calibrated to reflect the actual epidemiological trends, was used to estimate plausible ranges of programme impacts. The model was then used to estimate the costs per averted infection, death, and disability adjusted life-year (DALY). Results Based on observed prevalence reductions amongst most population groups, and plausible counterfactuals, modelling suggested that antiretroviral therapy (ART) and prevention programmes over 2006-2010 have averted an estimated 50,600 [95% uncertainty bound: 36,300–68,900] new infections and 42,600 [36,100–54,100] deaths, resulting in 401,600 [312,200–496,300] fewer DALYs across all population groups. HIV programmes in Vietnam have cost an estimated US$1,972 [1,447–2,747], US$2,344 [1,843–2,765], and US$248 [201–319] for each averted infection, death, and DALY, respectively. Conclusions Our evaluation suggests that HIV programmes in Vietnam have most likely had benefits that are cost-effective. ART and direct HIV prevention were the most cost-effective interventions in reducing HIV disease burden. PMID:26196290

P300 development across the lifespan: a systematic review and meta-analysis.

Directory of Open Access Journals (Sweden)

Rik van Dinteren

Full Text Available BACKGROUND: The P300 component of the event-related potential is a large positive waveform that can be extracted from the ongoing electroencephalogram using a two-stimuli oddball paradigm, and has been associated with cognitive information processing (e.g. memory, attention, executive function. This paper reviews the development of the auditory P300 across the lifespan. METHODOLOGY/PRINCIPAL FINDINGS: A systematic review and meta-analysis on the P300 was performed including 75 studies (n = 2,811. Scopus was searched for studies using healthy subjects and that reported means of P300 latency and amplitude measured at Pz and mean age. These findings were validated in an independent, existing cross-sectional dataset including 1,572 participants from ages 6-87. Curve-fitting procedures were applied to obtain a model of P300 development across the lifespan. In both studies logarithmic Gaussian models fitted the latency and amplitude data best. The P300 latency and amplitude follow a maturational path from childhood to adolescence, resulting in a period that marks a plateau, after which degenerative effects begin. We were able to determine ages that mark a maximum (in P300 amplitude or trough (in P300 latency segregating maturational from degenerative stages. We found these points of deflection occurred at different ages. CONCLUSIONS/SIGNIFICANCE: It is hypothesized that latency and amplitude index different aspects of brain maturation. The P300 latency possibly indexes neural speed or brain efficiency. The P300 amplitude might index neural power or cognitive resources, which increase with maturation.

7 CFR 300.4 - Reference Manual B.

Science.gov (United States)

2010-01-01

..., 2001, by the National Seed Health System (NSHS), has been approved for incorporation by reference in 7... inspection at the APHIS Library, U.S. Department of Agriculture, 4700 River Road, Riverdale, MD or at the... the APHIS Web site at http://www.aphis.usda.gov/ppq/pim/accreditation. ...

Isopiestic determination of the osmotic coefficients and Pitzer model representation for Li{sub 2}B{sub 4}O{sub 7}(aq) at T=298.15 K

Energy Technology Data Exchange (ETDEWEB)

Zhang Aiyun [Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining 810008 (China); Hei Long Jiang Science and Technology College, Ha' erbin (China); Yao Yan [Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining 810008 (China)]. E-mail: yanyao@pub.xaonline.com; Li Lijuan [Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining 810008 (China); Song Pengsheng [Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining 810008 (China)

2005-02-01

Isopiestic molalities and water activities have been measured for aqueous Li{sub 2}B{sub 4}O{sub 7} solutions from (0.0275 to 2.9397) mol.kg{sup -1} at T=298.15 K by isopiestic method, using an improved apparatus. These measurements have extended into the very dilute and the supersaturated molality region. Two types of osmotic coefficients of {phi}{sub S} and {phi}{sub E} were determined. {phi}{sub S} is based on the stoichiometric molalities of the solute Li{sub 2}B{sub 4}O{sub 7}(aq), and {phi}{sub E} is based on equilibrium molalities based on consideration of the equilibrium speciation of H3BO3,B(OH)4-,B3O3(OH)4-,andB4O5(OH)42- in the Li{sub 2}B{sub 4}O{sub 7}(aq) solutions. The stoichiometric equilibrium constants K{sub mi} for the aqueous speciation reactions were estimated. Three types of representations of the osmotic coefficients for the (Li{sub 2}B{sub 4}O{sub 7}+H{sub 2}O) system with the ion-interaction models based on Pitzer's equations of osmotic coefficients with minor modifications were presented: the model (I) for representation of the data of {phi}{sub S} with four parameters based on considering the ion-interactions between two ionic species of Li+andB4O72-, the model (II) for representation of the data of {phi}{sub E} based on considering the equilibrium speciation with 18 parameters, and the model (III) simplified from model (II) with six ion-interaction parameters estimated. The reasonable agreements between the experimental osmotic coefficient data and those calculated using the models above were obtained with the standard deviations of 0.0215, 0.0055, and 0.0150 for the three models, respectively. The thermodynamic osmotic coefficient properties for the complex system containing polymetric boron anions and lithium may be explained by use of the Pitzer ion-interaction model with minor modifications in combination with speciation reaction equilibria.

Observation of e+e-→ϕ χc 1 and ϕ χc 2 at √{s }=4.600 GeV