WorldWideScience

Sample records for mining industry practical

  1. Pollution minimisation practices in the Australian mining and mineral processing industries

    Energy Technology Data Exchange (ETDEWEB)

    Catherine Driussi; Janis Jansz [Edith Cowan University, Joondalup, WA (Australia)

    2006-07-01

    Research was conducted to identify some of the current pollution minimisation practices adopted in Australia's mining and mineral processing industries. Initially, 84 mining and mineral processing companies were approached for inclusion in the study, with request only made for information that was available to the company stakeholders and the wider general community. Among the responses received, BHP Billiton, BlueScope Steel, Newmont Australia Limited and AngloGold Australia provided the information requested and/or a substantial quantity of information through reports on their company website. Analysis of the data collected for these companies indicated that improvements were made, and that policies had been implemented over the previous few years. The pollution minimisation and policy practices adopted at the operations of these companies include environmental management systems, advanced pollution control technologies, environmental awareness training for employees, and requirement - from company stakeholders - for increased accountability of environmental impacts.

  2. Evaluation of the current practices of noise-induced hearing loss (NIHL) awareness training in the South African mining industry

    CSIR Research Space (South Africa)

    Edwards, AL

    2015-01-01

    Full Text Available This study aimed to evaluate the current practices in relation to best practice criteria and make recommendations for improvements to noise-induced hearing loss (NIHL) awareness training in the South African mining industry. A survey tool based...

  3. Exclusion, exemption and clearance in the mining and minerals industry: Practical application to South African operations

    International Nuclear Information System (INIS)

    Wymer, D.G.

    1997-01-01

    Although South Africa has no primary uranium mines, a major portion of its very large mining industry involves minerals with moderately elevated levels of naturally-occurring radionuclides, typical of elevated levels found in similar mineral deposits worldwide. Evidence both locally and internationally suggests that, where radioactive elements are not concentrated or extracted, such operations cannot normally give rise to undue radiological risks. The concept of exclusion should therefore play the major role in establishing which minerals-related operations should be subject to regulatory control, but exclusion criteria, which tend to be numerical rather than descriptive, vary widely between countries - in South Africa, very little is excluded and opportunities for granting exemptions are limited. The need for exemptions and clearance would be reduced if more extensive use of the exclusion concept were made, but it is nevertheless important to have better guidance on determining appropriate numerical exemption and clearance criteria - again, there are currently wide variations between countries, one example being the surface activity clearance levels for the reuse or recycling of uranium-contaminated items. Two examples, relating to gold mining tailings disposal and recycling of contaminated scrap steel respectively, are used to illustrate the difficulties that have arisen in South Africa on the clearance of low activity materials from the mining and minerals industry. Radon is identified as requiring separate consideration, and is the one area where more specific international guidance, based on action levels for intervention, is available. The action level for workplaces recommended by the IAEA would appear to represent a common basis for exclusion and exemption with respect to radon exposures from mining and minerals operations. For public exposures, the corresponding action level for homes, although not specifically intended for dealing with radon from nearby

  4. Principles of adoption of the successful environmental practices used in developed countries into mining industry in developing countries.

    Science.gov (United States)

    Masaitis, Alexandra

    2013-04-01

    The successful implementation of the environmental practices in the mining industry is of a paramount importance, as it not only prevents both local and trans-border pollution but also guarantees clean and healthy environment for the people regardless of their place of habitation. It is especially important to encourage the progress of the environmental practices implementation in developing countries because such countries have resource-oriented economy based on exploitation of nonrenewable resources. Poor environmental practices in developing countries will lead to local environmental crises that could eventually spill into surrounding countries including the most economically advanced. This abstract is a summary of a two-year research project attempted (1) to determine deficiencies of the mining sector ecological practices in developing countries and (2) to suggest substitute practices from developed countries that could be adapted to the developing countries reality. The following research methods were used: 1. The method of the system analysis, where the system is an interaction of the sets of environmental practices with the global mining sector; 2. The comparative method of inquiry, where the comparison was made between environmental protection practices as implemented in the US (developed country) and the developing countries such as RF, Mongolia mining sectors; 3. Quantitative date analysis, where date was collected from "The collection of statistic data", Russian Geographic Society Annual reports, the US EPA open reports, and the USGS Reports; The following results were obtained: Identified the systemic crisis of the ecological environmental policies and practices in the mining sector in developing countries based on the exploitation of nonrenewable resources, absence of the ecological interest by the mining companies that lack mechanisms of environmental and public health protection, the lack of insurance policy, the lack of risk assistance, and in the

  5. Ontario's uranium mining industry

    International Nuclear Information System (INIS)

    Runnalls, O.J.C.

    1981-01-01

    This report traces the Ontario uranium mining industry from the first discovery of uranium north of Sault Ste. Marie through the uranium boom of the 1950's when Elliot Lake and Bancroft were developed, the cutbacks of the 1960s, the renewed enthusiasm in exploration and development of the 1970s to the current position when continued production for the domestic market is assured. Ontario, with developed mines and operational expertise, will be in a position to compete for export markets as they reopen. The low level of expenditures for uranium exploration and the lack of new discoveries are noted. The report also reviews and places in perspective the development of policies and regulations governing the industry and the jurisdictional relationships of the Federal and Provincial governments

  6. Special survey: mining industry

    International Nuclear Information System (INIS)

    Preece, H.

    1981-01-01

    South Africa is now the world's second biggest producer of non-oil minerals after the United States and far ahead of Canada and Australia, according to the author. South Africa's economic growth prospects over the 1980's are inevitably crucially dependent on the mining industry. The production and economics of various minerals are discussed, with special reference to gold, coal, diamonds, uranium, platinum, manganese, copper and asbestos

  7. Internet technologies in the mining industry. Towards unattended mining systems

    Energy Technology Data Exchange (ETDEWEB)

    Krzykawski, Michal [FAMUR Group, Katowice (Poland)

    2009-08-27

    Global suppliers of longwall systems focus mainly on maximising the efficiency of the equipment they manufacture. Given the fact that, since 2004, coal demand on world markets has been constantly on the increase, even during an economic downturn, this endeavour seems fully justified. However, it should be remembered that maximum efficiency must be accompanied by maximum safety of all underground operations. This statement is based on the belief that the mining industry, which exploits increasingly deep and dangerous coal beds, faces the necessity to implement comprehensive IT systems for managing all mining processes and, in the near future, to use unmanned mining systems, fully controllable from the mine surface. The computerisation of mines is an indispensable element of the development of the world mining industry, a belief which has been put into practice with e-mine, developed by the FAMUR Group. (orig.)

  8. Industrial practices

    International Nuclear Information System (INIS)

    Velasquez Torrez, Patricia Irma

    1999-01-01

    This document reports the industrial practices carried out by the author viewing the requirements fulfilled for obtention the academic degree in chemical engineering of the San Andres University - Bolivia

  9. CEA and mining industry

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The French atomic energy commission (CEA) is involved in the mining industry in several ways: - in the front-end of the nuclear industry through its daughter companies and participations in the exploration and exploitation of uranium ores, but also of gold and alloy metals with a 26% participation in Eramet company, the world leader of manganese and nickel. This activity is the main occupation of Cogema daughter company, via the Areva holding; - in the back-end of the nuclear fuel cycle with the delicate problem of the management of radioactive wastes; - in parallel with the nuclear industry through an important activity in semiconductor materials (FCI and SMTElectronics); - and finally through various research works on several mineral compounds. This article focusses on the fuel cycle aspects of the CEA activities and concludes with the research works carried out today on thermonuclear fusion. (J.S.)

  10. Evaluating Water Management Practice for Sustainable Mining

    OpenAIRE

    Xiangfeng Zhang; Lei Gao; Damian Barrett; Yun Chen

    2014-01-01

    To move towards sustainable development, the mining industry needs to identify better mine water management practices for reducing raw water use, increasing water use efficiency, and eliminating environmental impacts in a precondition of securing mining production. However, the selection of optimal mine water management practices is technically challenging due to the lack of scientific tools to comprehensively evaluate management options against a set of conflicting criteria. This work has pr...

  11. Evaluation of the current practices of noise-induced hearing loss (NIHL) awareness training in the South African mining industry

    CSIR Research Space (South Africa)

    Edwards, AL

    2015-01-01

    Full Text Available on findings of a literature review on best practice for NIHL awareness training was developed for use in interviews, with managers responsible for NIHL awareness training at the mines. Thirty managers were interviewed in the survey at mines representative...

  12. Evaluating Water Management Practice for Sustainable Mining

    Directory of Open Access Journals (Sweden)

    Xiangfeng Zhang

    2014-02-01

    Full Text Available To move towards sustainable development, the mining industry needs to identify better mine water management practices for reducing raw water use, increasing water use efficiency, and eliminating environmental impacts in a precondition of securing mining production. However, the selection of optimal mine water management practices is technically challenging due to the lack of scientific tools to comprehensively evaluate management options against a set of conflicting criteria. This work has provided a solution to aid the identification of more sustainable mine water management practices. The solution includes a conceptual framework for forming a decision hierarchy; an evaluation method for assessing mine water management practices; and a sensitivity analysis in view of different preferences of stakeholders or managers. The solution is applied to a case study of the evaluation of sustainable water management practices in 16 mines located in the Bowen Basin in Queensland, Australia. The evaluation results illustrate the usefulness of the proposed solution. A sensitivity analysis is performed according to preference weights of stakeholders or managers. Some measures are provided for assessing sensitivity of strategy ranking outcomes if the weight of an indicator changes. Finally, some advice is given to improve the mine water management in some mines.

  13. Practical selection and method of operation of the sedimentation settling tanks in the clay mining industry; Praktische Auswahl und Betriebsart der Sedimentationsklaerbecken im Tonbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Groborz, Withold-Simon [Sibelco Deutschland GmbH, Ransbach-Baumbach (Germany)

    2009-10-22

    The application of the ''linear principles as optimisation basis for the technical planning of the sedimentation tanks in the clay mining industry'' described in GLUeCKAUF 143 (2007), No. 10 permits rapid and simplified planning of the settling tanks required for this purpose, which is fully dependent on the size of the dirty water pump used. The geometrical tank size is specified in advance. The course of the sedimentation process can be clearly improved, if there is more than one settling tank in operation, whereby selection of the method of operation of the tanks can basically be left to the mine operator. Nevertheless practical experience in this field has proved that connection of the tanks in series can be regarded as more effective for the sedimentation process. (orig.)

  14. Mining and sustainable development: environmental policies and programmes of mining industry associations

    International Nuclear Information System (INIS)

    Miller, C.G.

    1997-01-01

    Mining industry policies and practices have evolved rapidly in the environmental area, and more recently in the social area as well. Mining industry associations are using a variety of methods to stimulate and assist their member companies as they improve their environmental, social and economic performance. These associations provide opportunities for companies to use collaborative approaches in developing and applying improved technology, systems and practices (author)

  15. Industrial Mining's flexibility aids in customer satisfaction

    Energy Technology Data Exchange (ETDEWEB)

    1985-08-01

    Mining flexibility and customer specification keeps Industrial Mining of Youngstown, Ohio competitive in a tough environment. The company fills the needs of the small customer who requires a special blend or sized product. Industrial Mining works terrain that was uneconomical to mine before but is now profitable. Draglines and mobile equipment are used for overburden removal for economical and flexible mining with most mining by the contour method. Industrial Mining's preparation plant was constructed in 1979 to enable the company to wash and screen different stoker products and utility coal with a modern on-site lab a quality product can be constantly maintained. A wheel loader is used to feed the hopper from selective stockpiles and this allows blending on the raw side or within the plant.

  16. Energy efficient technologies for the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Klein, B.; Bamber, A.; Weatherwax, T.; Dozdiak, J.; Nadolski, S.; Roufail, R.; Parry, J.; Roufail, R.; Tong, L.; Hall, R. [British Columbia Univ., Vancouver, BC (Canada). Centre for Environmental Research in Minerals, Metals and Materials, Norman B. Keevil Inst. of Mining Engineering

    2010-07-01

    Mining in British Columbia is the second largest industrial electricity consumer. This presentation highlighted methods to help the mining industry reduce their energy requirements by limiting waste and improving efficiency. The measures are aimed at optimizing energy-use and efficiency in mining and processing and identifying opportunities and methods of improving this efficiency. Energy conservation in comminution and beneficiation is a primary focus of research activities at the University of British Columbia (UBC). The objective is to reduce energy usage in metal mines by 20 per cent overall. Open pit copper, gold and molybdenum mines are being targeted. Projects underway at UBC were outlined, with particular reference to energy usage, recovery and alternative energy sources; preconcentration; reducing energy usage from comminution in sorting, high pressure grinding rolls and high speed stirred mills; Hydromet; other energy efficient technologies such as control and flotation; and carbon dioxide sequestration. Studies were conducted at various mining facilities, including mines in Sudbury, Ontario. tabs., figs.

  17. Applied data mining for business and industry

    CERN Document Server

    Giudici, Paolo

    2009-01-01

    The increasing availability of data in our current, information overloaded society has led to the need for valid tools for its modelling and analysis. Data mining and applied statistical methods are the appropriate tools to extract knowledge from such data. This book provides an accessible introduction to data mining methods in a consistent and application oriented statistical framework, using case studies drawn from real industry projects and highlighting the use of data mining methods in a variety of business applications. Introduces data mining methods and applications.Covers classical and Bayesian multivariate statistical methodology as well as machine learning and computational data mining methods.Includes many recent developments such as association and sequence rules, graphical Markov models, lifetime value modelling, credit risk, operational risk and web mining.Features detailed case studies based on applied projects within industry.Incorporates discussion of data mining software, with case studies a...

  18. The South African mining industry

    International Nuclear Information System (INIS)

    Langton, G.

    1982-01-01

    This paper covers six of the many mining and associated developments in South Africa. These are: (1) Deep level gold mining at Western Deep Levels Limited - (2) Palabora Mining Company Limited - SA's unique copper mine - (3) Production of steel and vanadium-rich slag at Highveld Steel and Vanadium Corporation - (4) Coal mining at Kriel and Kleinkopje Collieries - (5) A mass mining system for use below the Gabbro Sill at Premier Diamond Mine - (6) Uranium production - joint metallurgical scheme- Orange Free State Gold Mines. - For publication in this journal the original paper has been summarised. Should any reader wish to have the full text in English he should write to the author at the address below. (orig.) [de

  19. ASEAN mining industry`s development

    Energy Technology Data Exchange (ETDEWEB)

    Simatupang, M [ASEAN Federation of Mining Associations (AFMA), Jakarta (Indonesia)

    1994-12-31

    A report is presented on the potential and challenges of mining in the ASEAN region. Legal and financial provision, the and business climate for future investment is also discussed. One problem is the small scale of many of the mining operations, so special guidance is needed, especially in environmental matters. Specific discussion is presented of mining in Indonesia, Malaysia, Thailand, the Philippines, Brunei, and Vietnam and Myanmar. 8 refs., 3 figs.

  20. An investigation on natural radioactivity from mining industry ...

    African Journals Online (AJOL)

    An investigation on natural radioactivity from mining industry # ... PROMOTING ACCESS TO AFRICAN RESEARCH ... Mining originating industries such as the coal industries, petroleum extraction and processing and natural gas, mining enrichment waste, phosphate, ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  1. Practical graph mining with R

    CERN Document Server

    Hendrix, William; Jenkins, John; Padmanabhan, Kanchana; Chakraborty, Arpan

    2014-01-01

    Practical Graph Mining with R presents a "do-it-yourself" approach to extracting interesting patterns from graph data. It covers many basic and advanced techniques for the identification of anomalous or frequently recurring patterns in a graph, the discovery of groups or clusters of nodes that share common patterns of attributes and relationships, the extraction of patterns that distinguish one category of graphs from another, and the use of those patterns to predict the category of new graphs. Hands-On Application of Graph Data Mining Each chapter in the book focuses on a graph mining task, such as link analysis, cluster analysis, and classification. Through applications using real data sets, the book demonstrates how computational techniques can help solve real-world problems. The applications covered include network intrusion detection, tumor cell diagnostics, face recognition, predictive toxicology, mining metabolic and protein-protein interaction networks, and community detection in social networks. De...

  2. Impacts of Canada's uranium mining industry

    International Nuclear Information System (INIS)

    Holman, G.J.

    1982-05-01

    This study examines economic and environmental impacts of uranium mining in Canada and compares these impacts with those of other extractive and energy industries. The uranium industry generates taxes and royalties, income, employment, foreign exchange earnings, security of energy supply, and technological spinoffs. The indirect impacts of the industry as measured by employment and income multipliers are lower than those for other types of mining and comparable to oil and gas because of the high proportion of costs withdrawn from the economy in the form of taxes and operator margin. Social costs are primarily occupational hazards. Uranium mining probably has a lower non-health environmental impact than other mining industries due to much smaller throughputs and transportation requirements. Residents of the area surrounding the mine bear a disproportionate share of the social costs, while non-residents receive most of the benefits

  3. Fatal accidents analysis in Peruvian mining industry

    International Nuclear Information System (INIS)

    Candia, R. C.; Hennies, W. T.; Azevedo, R. c.; Almeida, I.G.; Soto, J. F.

    2010-01-01

    Although reductions in the tax of injuries and accidents have been observed in recent years, Mining is still one of the highest risks industries. The basic causes for occurrence of fatalities can be attributed to unsafe conditions and unsafe acts. In this scene is necessary to identify safety problems and to aim the effective solutions. On the other hand, the developing countries dependence on primary industries as mining is evident. In the Peruvian economy, approximately 16% of the GNP and more than 50% of the exportations are due to the mining sector, detaching its competitive position in the worldwide mining. This paper presents fatal accidents analysis in the Peruvian mining industry, having as basis the register of occurred fatal accidents since year 2000 until 2007, identifying the main types of accidents occurred. The source of primary information is the General Mining Direction (DGM) of the Peruvian Mining and Energy Ministry (MEM). The majority of victims belongs to tertiary contractor companies that render services for mine companies. The results of the analysis show also that the majority of accidents happened in the underground mines, and that it is necessary to propose effective solutions to manage risks, aiming at reducing the fatal accidents taxes. (Author)

  4. Future needs for improvement of noise-induced hearing loss awareness training and hearing protection device practices in the South African mining industry

    CSIR Research Space (South Africa)

    Edwards, AL

    2012-08-01

    Full Text Available ) in order to identify the future needs of the industry with regards to improvement of NIHL awareness training to target audiences in the mining industry. This paper outlines the results of the study that interviewed 143 employees from a wide range...

  5. High safety in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    1987-08-01

    Presents an interview in question and answer format with the deputy chairman of Gosgortekhnadzor (Committee for Supervision of Industrial Work Safety and Mining Supervision) in which he discusses two recent fatal accidents in the Yasinovskaya-Glubokaya and Chaikino coal mines and identifies areas where safety needs to be improved (more automation, protective devices, ventilation etc.). Discusses the particular problems involved with deep mining (20% of mines are now deeper than 700 m and 27 mines are deeper than 1000 m), such as fires, dust, methane, rock falls, insufficient maintenance and strata control and poor ventilation. Confirms that a large number of accidents is due to poor organization and stresses the fact the coal industry must be subjected to perestroika (restructuring) as much as other areas of society.

  6. Future needs for improvement of NIHL awareness training and HPD practices in the South African mining industry

    CSIR Research Space (South Africa)

    Edwards, A

    2012-08-01

    Full Text Available around the ears. ? Custom moulded for individuals ear-some of the brand names are Variphone, Noise Ban, Noise Clipper 7 Methodology ? Literature review ? Survey mines- interview managers ? Interview employees ? Observe employees 8... like?...continued 6. Training methods - Adult education - own language, visually stimulating, interactive, perceptions of susceptibility, touch emotions 7. Essential content of awareness training-cause of NIHL, effect of NIHL, methods to mitigate...

  7. Self-regulation in the mining industry

    DEFF Research Database (Denmark)

    Sinding, Knud; Peck, Philip

    2013-01-01

    Many industries have established their own systems for self-regulation. They often do so when companies involved in the industry operate in countries where financial, technical, environmental and social regulation is weak and when the industry is challenged by legitimacy issues related to behaviour...... in one of these areas. One industry that has progressed unevenly down the road of self-regulation in these areas is mining. Developing self-regulation for mines and mining companies involves difficult questions of scope, rules, membership, assessment criteria and performance evaluation. While self-regulation...... may bring benefits to members, they are likely to take a long time coming; but when they do arrive they may be substantial. Using a range of theoretical and empirical results from research on self-regulation, performance rating and corporate strategy, this paper analyses the strategic and operational...

  8. UST-IDRC national symposium on the mining industry and the environment: programme and abstracts

    International Nuclear Information System (INIS)

    1997-04-01

    The National Symposium on the mining industry and the environment was organized by the UST/IDRC Environmental Research Group in the Department of Chemistry of the University of Science and Technology, Kumasi, Ghana. The symposium generally covered strategies for the development of the mining industry as well as solutions to the environmental problems associated with the industry in Ghana. The publication contains the programme and abstracts of scientific sessions of the Symposium. The abstracts covered the following topics among others: multi-element analysis of mineral ores samples, review of environmental studies related to gold mining in Ghana, local sulphooxidizing bacteria for environmentally friendly gold mining, arsenic pollution in streams and sediments, rainfall erositivity and soil loss from degraded lands and mine spoils, the impact of surface mining on forest structure and environment, current environmental practices in the mining industry, and the role of the mining industry in the economy of Ghana

  9. Mining industry in Republic of Macedonia

    International Nuclear Information System (INIS)

    Vrentsovski, Angele

    1996-01-01

    Mining production has a special significance in the economy of the Republic of Macedonia. The mining comprises 6% of national earnings in the Republic of Macedonia and accounts for 16% of all people employed in industry. Mining products include coal which assures over 80% of all electrical energy as well as raw materials for metallurgy, the refractory and clay industry, decorative stones, etc. Given the conditions of the fixed economy in the former Yugoslavia, the State controlled the prices associated with mining. Following the break up of Yugoslavia and the independence of the Republic of Macedonia, a new period was entered, one dictated by a market economy and massive privatization - a period of transition. This new period was hindered by the blockades on both north and south borders and resulted in negative repercussions for mining production, especially raw materials which were intended for export. This paper intends to describe the current situation of mining production and to evaluate the realistic economic opportunities regarding the new market conditions. (author). 5 refs., 2 tabs

  10. Domestic uranium mining and milling industry 1991

    International Nuclear Information System (INIS)

    1992-12-01

    This report was prepared by the Energy Information Administration to provide the Secretary of Energy with basic data and analyses for ninth annual determination of the viability of the domestic uranium mining and milling industry. A viability determination is required annually, for the years 1983 through 1992, by Section 170B of the Nuclear Regulatory Commission (NRC) Authorization Act of 1983, Public Law 97-415, which amend the Atomic Energy Act of 1954. Topics include: evolution of the U.S. uranium industry; nuclear power requirements and uranium industry projections; and attributes of industry viability

  11. Aggregate and Mineral Resources - Industrial Mineral Mining Operations

    Data.gov (United States)

    NSGIC Education | GIS Inventory — An Industrial Mineral Mining Operation is a DEP primary facility type related to the Industrial Mineral Mining Program. The sub-facility types are listed below:Deep...

  12. Restoration Practices Used on Post Mining Sites and Industrial Deposits in the Czech Republic with an Example of Natural Restoration of Granodiorite Quarries and Spoil Heaps

    Directory of Open Access Journals (Sweden)

    Chuman Tomáš

    2015-11-01

    Full Text Available Mining of minerals that have significant impact on landscape and landscape functions affects 1% of the land surface worldwide. In the Czech Republic the extent of mining sites is estimated to be more than 800 km2 and according to the state legislation the land affected by mining should be reclaimed. There are several approaches to land restoration, which are shortly reviewed in this article, from pure technical approach to one adopting natural processes. The review shows increasing appeal of scientist and conservationist to use natural processes e.g. natural or directed succession as an alternative method of post-mining sites or industrial deposits restoration due to growing evidence of conservational value of such sites in human dominated landscapes. The natural processes used for land restoration are often argued to be slow therefore the rate of spontaneous vegetation succession was assessed in stone quarries and on spoil heaps using a sequence of panchromatic aerial images. The results showed that natural processes act fast and vegetation can reach 100% cover within 10-15 years in granodiorite quarries and on spoil heaps.

  13. Public consent for mining: An industry viewpoint

    International Nuclear Information System (INIS)

    Zelms, J.L.

    1990-01-01

    The predominance of the mining industry was never intentionally destructive to the environment. Even when laws and regulations were far more relaxed than they are today, our operations were conducted professionally, But when change came, mining companies took a noncooperative attitude. We knew that we were the mining experts and that regulators or lawmakers were not. And it became accepted in our industry to stonewall change -- not to work with regulators and lawmakers but to resist change. This same attitude spilled over into attitudes with the media. Reporters were percieved as the enemy and many felt the press misrepresented their views. So we didn't work with the media unless we absolutely had to. In the process, industry did not participate in establishing guidelines and criteria for environmental regulation. Business ceded the environmental agenda to others and we have ended up with laws that forced billions of dollars of expenditures without ensuring that those expenditures had maximum impact on environmental problems. New rules are written by people less knowledgeable about the industry, consequently they cost more than they should and may not even have the desired result. Companies end up spending more than if they had addressed the problem themselves originally. It is no longer enough merely to be mining professionals. Today, it's only a threshold requirement for enduring success. We will best earn public consent to operate by anticipating what society will expect of us and by working to meet those expectations. We must set our own public policy before they become law or regulation and before we are branded as nonresponsive and noncaring

  14. The crisis in the uranium mining industry

    International Nuclear Information System (INIS)

    Ballery, J.L.

    1993-01-01

    For over ten years, the uranium mining industry within the OECD and elsewhere has been undergoing its worst ever crisis. At a time when it seemed assured of a promising future, the economic recession of the 1980s took the wind out of its sails. This paper describes the factors causing the crisis, strikes the balance of production, demand and stocks and gives forecasts for the next years. 3 figs., 9 refs

  15. Uranium mining industry: the challenges and opportunities

    International Nuclear Information System (INIS)

    Dhar, B.B.

    2009-01-01

    In the global power generation nuclear industry plays a vital role in this modern era which is wholly energy driven. While the demand for nuclear power generation has been growing worldwide, concerns about supply of critical nuclear equipment is one of the key areas which supports the growth of the nuclear industry. As the reemergence of nuclear industry in the global energy arena indicates a significant growth of nuclear power, forecasting the demand for various critical equipment components is critical to industry's growth together with the supply of enriched/processed uranium and related services. India is stepping in this industry in a big way and with Indo-US Nuclear deal, it is going to be a world player in its own right. The basic raw material for nuclear energy is the uranium which has the potential to be highly dangerous substance when not treated in the proper manner, remaining radioactive for hundreds and thousand of years. Uranium mining could permanently damage the environment for tens of thousand of years, if not properly mined and managed

  16. Managing Communities – Mining MNEs’ Community Risk Management Practices

    DEFF Research Database (Denmark)

    Taarup Esbensen, Jacob

    This PhD reflects the effort to close a gap in the multinational enterprise (MNE) risk management literature on the identification and mitigation of risk arising from local communities. Small villages and towns that are situated geographically close to the MNEs’ place of operation have increasingly......-to-date information about mining MNE operations. This improved outreach has meant that mines have been closed due to conflicts with local communities and therefor a need had arisen for MNEs to implement management practices that can effectively mitigate these types of risks....... been identified as a source of risk (BSR, 2003; ICMM, 2015). The mining industry is one of the most exposed to risks from local communities, where there historically have been many conflicts between mine owners on one side and the people living close to the mine on the other (Godoy, 1985; Hoskin, 1912...

  17. Domestic uranium mining and milling industry 1989

    International Nuclear Information System (INIS)

    1990-01-01

    Section 170B of the Atomic Energy Act of 1954, as amended by Public Law 97-415, requires that the Secretary of Energy submit to Congress an annual assessment of the viability of the domestic uranium mining and milling industry. The Energy Information Administration (EIA) of the Department of Energy (DOE) was assigned the responsibility to develop the criteria for use in estimating the viability of the industry. These criteria include four major attributes of industry viability - resource capability, supply response capability, financial capability, and import commitment dependency. Having established these criteria, the Secretary of Energy is required to monitor the industry and make an annual assessment of its viability for 1983 through 1992. The first six assessments were issued in the years 1984 through 1989 based on information available for 1983 through 1988, respectively. The current report provides the data and analyses, based on the information available through the end of the calendar year 1989, supporting the seventh annual assessment of the uranium industry's viability. It presents information on the four major attributes. Data on past and present industry behavior, as well as projections of the future status of the industry (assuming current market conditions), were used to examine the industry's ability to respond, over a 10-year period, to two hypothetical supply disruption scenarios. 20 figs., 23 tabs

  18. Barriers to green supply chain management in Indian mining industries

    DEFF Research Database (Denmark)

    Muduli, K.; Govindan, Kannan; Barve, A.

    2013-01-01

    industries are increasingly implementing environmental management systems (EMS), cleaner production (CP), and adopting green supply chain management (GSCM) practices. GSCM focuses on a reduction of the adverse impacts of supply chain activities as well as a minimization of energy and material usage......A country's mining industry, despite its significant contributions to the country's economic growth, generally has a very poor public image because it is considered as a major environmental polluter. To acquire an improved social image, as well as to comply with government regulations, mining...... strength of the barriers will help decision makers rank them and decide a course of action that will make an optimum utilization of available resources during times of resource scarcity....

  19. Team based risk assessment in the South African mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Turner, J.; Ashworth, G.; Webger, S.; Protheroe, B. [CSIR, Auckland Park (South Africa). MineRisk Africa Division

    1996-12-31

    Improved health and safety for the large mining workforce in South Africa is a priority. Risk Assessments will be mandatory following the promulgation of the new health and safety act, due out in mid 1996. There is also a strong demand for employee organizations for participation in regulating the work process, particularly in the aspects of health and safety. The concept of system safety is that safe production is achieved through four ingredients, being, competent and trained personnel working according to appropriate standard operating practices using fit-for-purpose equipment in a well-controlled environment. A deficiency in any one of these areas will lead to an increased chance of operating problems and consequently accidents. The Mine Risk processes for risk assessment and management provide a mechanism for adopting this concept in practical mining operations; they provide a framework for identifying the root cause of safety problems as a basis for defining changes which will contribute significantly towards improving safety. The Mine Risk processes are applied practively and systematically to identify hazards and evaluate the magnitude of the associated risk in a defined aspect of the mining operation using a participative team based approach. The team, whose membership consists of highly experienced personnel drawn from all relevant departments and from positions ranging from manager to operator, then determines practical controls to reduce priority risks to acceptable levels. Team building is a natural product of this process, and should lead to higher productivity levels which is also a cause for concern. By using this process, a number of objectives of all the stakeholders in the South African Mining industry are addressed. 3 tabs.

  20. Possibilities of professional career in the German coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Gierhardt, H; Mader, S

    1977-06-01

    Development and age structure of the labor force. Possibilities and courses of professional training in the German coal mining industry. Choice of profession and possibilities of promotion. More advertising campaigns necessary to obtain recruits for mining work.

  1. Best Practice in Environmental Management of Uranium Mining

    International Nuclear Information System (INIS)

    2010-01-01

    The modern uranium mining industry was born in the middle of the 20th century at a time of rapid industrial and social change and in an atmosphere of concern over the development of nuclear weapons. At many uranium mining operations, the need to produce uranium far outweighed the need to ensure that there were any more than vestigial efforts made in protecting the workers, the public and the environment from the impacts of the mining, both radiological and non-radiological. In the last quarter of the 20th century, the world began to take greater care of the total environment with the introduction of legislation and the development of operating procedures that took environmental protection into account. The uranium mining industry was part of this change, and standards of environmental management began to become of significance in corporate planning strategies. However, by the 1980s, as uranium mining companies began to address the issues of environment protection, the industry began to suffer a cyclical slowdown. By the 1990s, the industry was at a nadir, but the surviving uranium producers continued to develop and implement a series of procedures in environmental management that were regarded as best practices. This, in part, was necessary as a means to demonstrate to the regulators, governments and the public that the mining operations were being run with the intention of minimizing adverse impacts on the workers, people and the environment. This ensured that mining would be allowed to continue. The decline in uranium mining activity bottomed out in the 1990s, but a resurgence of activity began in the new century that is likely to continue for some time. This has been, in part, due to market conditions and concerns about the shortfall of current production from primary sources (uranium mines) against current reactor fuel demands; the anticipated decrease in future availability of secondary sources such as stockpiles; and the increased interest in nuclear power

  2. The future of the uranium mining industry

    International Nuclear Information System (INIS)

    Capus, G.; Galaud, G.

    1993-01-01

    This paper presents the state of natural Uranium market today. In a first part, the author gives a brief history about nuclear programs history in Usa and Europe and describes natural Uranium demand and supply (Uranium mines, recycling, excessive civil stocks, military stocks using). In a second part, evolutions and futures of Uranium industry is studied: using of excessive stocks in Western Europe, using of military stocks, recycling of Uranium from spent fuels reprocessing, uranium deposits, future natural uranium market. 6 refs., 4 figs., 3 tabs., 3 photos

  3. Requirements and opportunities for mining engineers in the mining industry abroad

    Energy Technology Data Exchange (ETDEWEB)

    Albrecht, E

    1987-04-09

    The decline of the German mining industry and the increasing industrialization of mining is forcing ever greater numbers of young German mining graduates to build their careers abroad. The requirements for this - apart from the technical qualifications are a good knowledge of foreign languages and a readiness to leave Germany for a long time, even for ever. If the young mining graduate accepts these conditions, numerous professional opportunities will open up for him, both with German mining companies with interests abroad, in mining supply companies and consultancy firms and with foreign companies. 6 references.

  4. The role of public consultation in leading practice uranium mining

    International Nuclear Information System (INIS)

    Vance, R.

    2014-01-01

    As the raw material used to fuel nuclear power plants to generate significant amounts of electricity with life cycle carbon emissions as low as renewable energy sources, uranium is a valuable energy commodity. Yet the mining of uranium remains controversial, principally because of the environmental and health impacts created in the early years of the industry when uranium mining was conducted by governments to meet military requirements during the Cold War. At the time, maximising production in the face of rapidly rising demand was the principal goal and little concern was given to properly managing environmental and health impacts or community relations. Uranium mining is now conducted under significantly different circumstances than those in the early era of production for military purposes. Since then, societal expectations of environmental protection and the safety of workers and the public have evolved as the outcomes of the early era of mining became apparent, driving changes in regulatory oversight and mining practices. Leading practice uranium mining is now the most regulated and arguably one of the safest forms of mining in the world. Public consultation was seldom, if ever, undertaken in the early stages of uranium mining. As with other forms of mining, societal attitudes about health and safety and environmental protection have been accompanied by an expectation that public participation should be an integral part of planning and approval processes for uranium mines along with transparency and assurances of performance throughout the entire life cycle of the facility. Leading practice uranium mining includes repeated opportunities for public consultation throughout the life of a mining facility. Major milestones for public consultation in the mine life cycle include the environmental impact assessment process that engages the interested public and special interest groups, such as local native and aboriginal populations. In order to demonstrate that

  5. Aggregate and Mineral Resources - MO 2014 Industrial Mineral Mines (SHP)

    Data.gov (United States)

    NSGIC State | GIS Inventory — This data set contains names, locations and additional data for active Industrial Mineral Mines permitted with the Missouri Department of Natural Resources, Division...

  6. Alexandra Masaitis, UNR NV, USA. PhD Grad St. Principles of Adoption of the Successful Environmental Policies and Practices Used in Developed Countries into the Russian Mining Industry

    Science.gov (United States)

    Masaitis, A.

    2012-12-01

    The successful implementation of the environmental policies in the mining industry is of a paramount importance, as it not only prevents both local and trans-border pollution but also guarantees a clean and healthy environment for the people regardless of their place of habitation. It is especially important to encourage the progress of the environmental policy implementation in less regulated countries such as the Russia because such countries have resource-oriented economy based on development of nonrenewable resources. Poor environmental practices in such countries will lead to local environmental crises that could eventually spill into surrounding countries including the most economically advanced. This abstract is a summary of a two-year research project attempted (1) to determine deficiencies of the Russian mining sector ecological policies and (2) to suggest substitute policies from developed countries that could be adapted to the Russian reality. The following research methods were used: 1. The method of the system analysis, where the system is an interaction of the sets of environmental policies; 2. The comparative method of inquiry, 3. Quantitative data analysis, where data was collected from "The collection of statistic data", the US EPA open reports, and the USGS Reports; 4. Review of the Norilsk Nickel Company annual reports. The following results were obtained: Identified the systemic crisis of the ecological environmental policies in the Russian mining sector based on the development of nonrenewable resources, in the absence of the ecological interest by the mining companies that lack mechanisms of environmental and public health protection, the lack of insurance policy, the lack of risk assessment, and in the presence of the audit and monitoring that do not address the local conditions. Based on the above, the following concepts were thought of to improve the environmental conditions in the Russian mining sector: 1. Was developed the Regional

  7. Restoration Practices Used on Post Mining Sites and Industrial Deposits in the Czech Republic with an Example of Natural Restoration of Granodiorite Quarries and Spoil Heaps

    OpenAIRE

    Chuman Tomáš

    2015-01-01

    Mining of minerals that have significant impact on landscape and landscape functions affects 1% of the land surface worldwide. In the Czech Republic the extent of mining sites is estimated to be more than 800 km2 and according to the state legislation the land affected by mining should be reclaimed. There are several approaches to land restoration, which are shortly reviewed in this article, from pure technical approach to one adopting natural processes. The review shows increasing appeal of ...

  8. Africa's Mining Sector Development: An Industry Perspective ...

    African Journals Online (AJOL)

    Open Access DOWNLOAD FULL TEXT ... major mining destination for mining companies from Europe, North America, China, and of course South Africa. ... interest in Africa, because the continent is clearly a significant potential source of raw ...

  9. Image of mining impacts future of US industry

    International Nuclear Information System (INIS)

    Beebe, R.R.

    1993-01-01

    The US mining industry has taken its licks over the years but remains economically viable and able to meet global demands, says R.R. Beebe, a retired executive with Homestake Mining Company in San Francisco. Despite a new-found environmental sensitivity, one of the industry's major problems is its negative public image, Beebe admits. open-quotes Mining's record of environmental insensitivity and demands for low-cost access to public lands has burdened an industry now largely committed to doing business fairly, responsibly, and with minimum environmental disturbance,close quotes he asserts. Another part of its image problem deals with the place of mining in the economic scheme of things. Too many people view mining as a open-quotes sunset industry,close quotes he says, making it difficult for the industry to get a fair hearing on the public stage. open-quotes Even the industry's top executives seem to prefer a low profile, rarely serving in government posts...and almost never seeking public platforms from which to expound their views,close quotes Beebe complains. The size of the US mining industry and the importance of the minerals it supplies to domestic industry make it a significant contributor to the nation's standard of living, Beebe emphasizes. This makes it an industry worth saving

  10. Metal Separations and Recovery in the Mining Industry

    Science.gov (United States)

    Izatt, Steven R.; Bruening, Ronald L.; Izatt, Neil E.

    2012-11-01

    Molecular Recognition Technology (MRT) plays an important role in the hydrometallurgical processing dissolved entities in solutions in the mining industry. The status of this industry with respect to sustainability and environmental issues is presented and discussed. The roles of MRT and ion exchange in metal separation and recovery processes in the mining industry are discussed and evaluated. Examples of MRT separation processes of interest to the mining community are given involving gold, cobalt purification by extraction of trace cadmium, rhenium, and platinum group metals (PGMs). MRT processes are shown to be sustainable, economically viable, energy efficient, and environmentally friendly, and to have a low carbon footprint.

  11. Best practice in situ recovery uranium mining in Australia

    International Nuclear Information System (INIS)

    Lambert, I.B.; McKay, A.D.; Carson, L.J.

    2010-01-01

    The Australian Government policy is to ensure that uranium mining, milling and rehabilitation is based on world best practice standards. A best practice guide for in situ recovery (ISR) uranium mining has been developed to communicate the Australian Government's expectations with a view to achieving greater certainty that ISR mining projects meet Australian Government policy and consistency in the assessment of ISR mine proposals within multiple government regulatory processes. The guide focuses on the main perceived risks; impacts on groundwaters, disposal of mining residues, and radiation protection. World best practice does not amount to a universal template for ISR mining because the characteristics of individual ore bodies determine the best practice. (author)

  12. Applications of radio frequency identification systems in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Hind, D [Davis Derby Limited (United Kingdom)

    1994-12-31

    The paper describes the application of Radio Frequency Identification (RFID) systems in the mining industry for both surface and underground mines. The history of the RFID system, types available, the transponder, and the various techniques used are described and compared. The design and certification of a system for use in a hazardous area are described, noting the hazard of inadvertent detonator ignition. 2 refs.

  13. Usage of Safety Gloves in the Gold Mining Industry

    CSIR Research Space (South Africa)

    Scheepers, JCE

    1978-10-01

    Full Text Available The safety departments of 31 mines were visited, and the data obtained was used to determine to what extent safety gloves were being used in the gold mining industry. The frequency of occurrence of hand injuries amongst black workers of the gold...

  14. Hearing conservation in the South African mining industry [Notes

    CSIR Research Space (South Africa)

    Edwards, A

    2010-09-01

    Full Text Available This paper deals with noise-induced hearing loss protection in the South African mining industry. I deals with several issues, including standards and regulations, medical issues and compensation...

  15. Practical lubrication for industrial facilities

    CERN Document Server

    Bloch, Heinz

    2016-01-01

    Now completely revised and updated, this definitive, hands-on reference provides a comprehensive resource on the fundamental principles of lubricant application, what products are available, and which lubricants are most effective for specific applications. It also offers a detailed and highly practical discussion of lubrication delivery systems. You'll gain a clearer understanding of the "why" of relevant industrial lubrication practices, and, importantly, how these practices will facilitate optimized results. Lubricant applications covered include bearings and machine elements in earthbound

  16. Queensland's mining industry vital to state and national economies

    Energy Technology Data Exchange (ETDEWEB)

    Austin, B

    1987-04-01

    Queensland's multi-billion dollar mining industry, and the industries it supports, continues to play a vital role in the economy of the State and the nation. According to Australian Bureau of Statistics figures, Queenland produces nearly half of the black coal mined in Australia, 70% of the copper, 54% of the silver, 42% of the lead, 31% of the zinc, 40% of the tungsten, 25% of the bauxite and tin, 46% of the rutile, and 9% of the gold.

  17. Recent developments in Australia's uranium mining industry

    International Nuclear Information System (INIS)

    McKay, A.D.

    2001-01-01

    Uranium is produced at two mining/milling operations in Australia - Ranger in the Alligator Rivers Region of the Northern Territory, and Olympic Dam in South Australia. In 1996, Ranger produced 4138 tonnes (t) U 3 O 8 from stockpiled ore mined from Ranger No. 1 Orebody. The capacity of the Ranger mill is being expanded to 5000 tonnes per annum (tpa) U 3 O 8 to coincide with the commencement of mining from No. 3 Orebody in mid-1997. The Olympic Dam copper-uranium-gold-silver deposit is the world's largest deposit of low cost uranium. The operation currently has an annual production of 85,000 t copper, 1700 t U 3 O 8 and associated gold and silver. WMC Ltd proposes to expand annual production to 200 000 t copper and approximately 4600 t U 3 O 8 by end of 1999. The environmental impact of the expansion is being assessed jointly by both Commonwealth and South Australian Governments. A draft Environmental Impact Statement (EIS) was released in May. Since its election in March 1996, the Liberal/National Party Coalition Government has made a number of changes to the Commonwealth Government's policies relating to uranium mining, including removal of the former Government's 'three mines' policy, and relaxation of the guidelines for foreign investment in Australian uranium mines. These changes, together with an improved outlook for the uranium market, have resulted in proposals to develop new mines at Jabiluka (Northern Territory), Kintyre (Western Australia) and Beverley (South Australia). Energy Resources of Australia Ltd proposes to develop an underground mine at Jabiluka with the ore to be processed at Ranger mill. Initial production will be 1800 tpa U 3 O 8 which will increase to 4000 tpa U 3 O 8 by the 14th year. The draft EIS was released for public comment in October 1996, and the final EIS is to be released in June 1997. Canning Resources Ltd proposes to mine the Kintyre deposit by open cut methods commencing in 1999 with an annual production of 1200 tpa U 3 O 8

  18. Instrumentation for the uranium mining industry

    International Nuclear Information System (INIS)

    Gray, R.A.

    1978-01-01

    Brief descriptions are presented concerning instruments used in uranium mining, including R meter, radon daughter working level counter, radon gas detectors, alpha contamination monitors, air samplers, ore grade evaluators and gamma energy analyzers

  19. Nuclear regulation of South African mines: An industry perspective

    International Nuclear Information System (INIS)

    Wymer, D.G.

    2001-01-01

    South African mines have become subject to a rigid and prescriptive system of nuclear regulation that has its roots in the past when South Africa embarked upon a period of nuclear development spanning the full nuclear fuel cycle, and in which the South African gold mining industry once played a major part in the supply of uranium as a low grade by-product. Radiation hazards in the mines are generally very moderate, even in the few gold mines associated with uranium by-product, and to not warrant the type of regulatory attention normally applied to nuclear installations, or even to uranium mines. The continued imposition of strict nuclear regulatory requirements has caused severe financial hardship and threatens the survival of certain mining operations, while seemingly having little or no health benefits to workers or the public. With the development of modern, comprehensive mine health and safety legislation, a more appropriate, effective, and far less costly vehicle for controlling radiation hazards in mines now exists, utilizing the resources of the Mine Health and Safety Inspectorate. This approach is now being proposed, in the drafting of new legislation, as constituting a better alternative to the nuclear regulation of mines. (author)

  20. Economical Recovery of By-products in the Mining Industry

    Energy Technology Data Exchange (ETDEWEB)

    Berry, J.B.

    2001-12-05

    The U.S. Department of Energy (DOE) Office of Industrial Technologies, Mining Industry of the Future Program, works with the mining industry to further the industry's advances toward environmental and economic goals. Two of these goals are (1) responsible emission and by-product management and (2) low-cost and efficient production (DOE 1998). DOE formed an alliance with the National Mining Association (NMA) to strengthen the basis for research projects conducted to benefit the mining industry. NMA and industry representatives actively participate in this alliance by evaluating project proposals and by recommending research project selection to DOE. Similarly, the National Research Council (NRC) has recently and independently recommended research and technology development opportunities in the mining industry (NRC 2001). The Oak Ridge National Laboratory (ORNL) and Colorado School of Mines engineers conducted one such project for DOE regarding by -product recovery from mining process residue. The results of this project include this report on mining industry process residue and waste with opportunity for by-product recovery. The U.S. mineral processing industry produces over 30,000,000 metric tons per year of process residue and waste that may contain hazardous species as well as valuable by-products. This study evaluates the copper, lead, and zinc commodity sectors which generate between 23,300,000 and 24,000,000 metric tons per year. The distribution of residual elements in process residues and wastes varies over wide ranges* because of variations in the original ore content as it is extracted from the earth's crust. In the earth's crust, the elements of interest to mining fall into two general geochemical classifications, lithophiles and chalcophiles** (Cox 1997). Groups of elements are almost always present together in a given geochemical classification, but the relative amounts of each element are unique to a particular ore body. This paper

  1. Social license to operate: case from brazilian mining industry

    Science.gov (United States)

    Santiago, Ana Lúcia F.; Demajorovic, Jacques; Aledo, Antonio

    2015-04-01

    The approach of the Social License to Operate (SLO) emerges as an important element in academic discussions and business practices related to extractive industries. It appears that in productive activities with great potential to produce economic, social and environmental impacts, conventional approaches based on legal compliance no longer sufficient to legitimize the actions of companies and engagement stakeholders. Studies highlight the need of mining activities receiving a SLO "issued" by companies stakeholders, including society, government, non-governmental organizations, media and communities. However, local communities appears as major stakeholders in governance arrangements, by virtue of its proximity to extractive areas and ability to affect the company's results. Stakeholders with unmet expectations can generate conflicts and risks to the company, the knowledge of these expectations and an awareness of company managers of the importance of Social License to Operate (SLO), can generate strategies and mitigating actions to prevent and or minimize possible conflicts. The concept of SLO arises in engineering extractive industry, when you need to respond to social challenges, beyond the usual environmental challenges, technological and management. According to Franks and Cohen (2012) there is a tendency of engineering sectors, sustainability, environmental, safety and especially in risk mappings, treat the technological issues in a neutral manner, separating the technological research projects of social influences. I want to contribute to the advancement of the debate on stakeholder engagement and adopting as focus on the company's relationship with the community, the aim of this study was to understand how a social project held by one of the largest mining companies in Brazil contributed to the process of SLO. This methodological procedure adopted was a qualitative, descriptive, and exploratory interviews with the communities located in rural areas of direct

  2. Recent developments in Australia's uranium mining industry

    International Nuclear Information System (INIS)

    Lambert, I.B.; McKay, A.D.

    1998-01-01

    Australia's economic, demonstrated resources of uranium (U) at the end of 1996 amounted to 622,000 tonnes U, the largest of any country. Uranium is currently produced at two mining/milling operations in Australia - Ranger in the Alligator Rivers Region of the Northern Territory, and Olympic Dam in South Australia. Improved market conditions and recent changes to Government policies have encouraged Australian companies to commit to the expansion of existing operations and the development of new uranium mines. Australia's annual production is likely to increase from its present level of 6000 tonncs (t) U 3 O 8 to approximately 12 000 t U 3 O 8 by the year 2000. (author)

  3. Radiological protection in the mining industry

    International Nuclear Information System (INIS)

    O'Riordan, M.C.

    1976-01-01

    The information contained in the National Radiological Protection Board's report (Strong, J.C., Laidlaw, A.J. and O'Riordan, M.C., Radon and its daughters in various British mines, NRPB-R39 (1975), HMSO) is updated with data collected between October 1975 and January 1976, and certain aspects of the work highlighted. The latest results in the continuing survey, which now covers more than 60 non-coal mines employing nearly 2000 men underground, reflect the corrective actions taken in a number of mines by improvements in ventilation management. The survey is now carried out by means of radon flasks supplied by post and returned to the NRPB for measurement. An empirical relationship is used to relate the radon gas and daughter concentrations at different ventilation rates. The results show that there has been a marked decrease (from 42% to 24%) in the number of men exposed above 4 working level months (WLM) in a year, the category requiring supervision (1 to 4 WLM in a year) has increased from 15% to 28%, and the lowest exposure category has increased from 43% to 48%. Although excessive exposures are still a problem, particularly in some tin mines in Cornwall, general compliance with the exposure limit seems possible in the near future. (U.K.)

  4. Cubis AG - for the mining industry and for new markets

    International Nuclear Information System (INIS)

    Hamm, E.

    1994-01-01

    In Germany the research funds for the mining industry will again be cut drastically in future. Cubis must plan and use the remaining research funds in an optimum manner in conjunction with the mining industry itself and also the mining supply industry. Close cooperation and continuous coordination between the research institutes and industrial partners will continue to be necessary for this purpose. Transfer of technology between research and industrial application must take place more smoothly. It is not a question of marketing the implementation of results of individual research and development projects; on the contrary system solutions from one source are required and offered. Long-term business relationships with industrial partners, within the framework of which contract research, advice, engineering, training, etc. can be realised, are desirable. Cubis has undertaken the responsibility to make available services to the mining industry and involve itself in new markets with the released capacities. The success so far achieved by the new company shows that competence and potential to face up to the large tasks exist. Cubis is equipped to tackle the continuous challenge of technology and safety at work, but also the tasks in the raw material and environment sectors in the nineties and is the suitable partner for solution of problems. (orig.)

  5. Nucleonic gauges in the Australian mining and exploration industries

    International Nuclear Information System (INIS)

    Charbucinski, J.

    2000-01-01

    On-line and in-situ nucleonic analysis systems have found widespread application in the Australian metalliferous mineral and coal industries. The rapid and reliable response of these systems has led to improved exploration and better control of mining and mineral processing. This paper reviews both types of nucleonic control system (on-line and in-situ) available in Australian exploration and mining market. (author)

  6. How the environmental community views the mining industry

    International Nuclear Information System (INIS)

    Maest, A.

    1990-01-01

    Working with the Environmental Mining Network, a coalition of ∼75 environmental groups nationwide formed to encourage environmentally-sound hard-rock mining. Emphasis is on changing the industrial process so that wastes are not created in the first place, instead of creating the wastes and dealing with them as an afterthought. The tradition of pollution control is slowly being replaced with prevention. Objectives of pollution prevention for mining include: Reduction of the volume of material extracted, beneficiated, processed, and removed for exploration by improving techniques for these processes, mining less, and encouraging remining and use of scrap materials; Reduction of the toxicity and environmental impact of wastes that are nonetheless generated by employing techniques that minimize the release of contaminants to the environment; Identifying current and developing technologies for pollution prevention in the mining industry and distribute this among the regulated community. Pollution prevention should be incorporated in design and performance standards. Assessment and demonstration of pollution prevention should be part of the permit application. Implementation of serious non-rhetorical pollution prevention by the mining industry has the potential to give miners and environmentalists a common ground and common goals where we could truely be in a win-win situation in terms of encouraging both environmental and economic robustness

  7. Environmental and community issues and the mining industry

    International Nuclear Information System (INIS)

    Crowson, P.

    1998-01-01

    Much has been said and written in recent years about the greatly increased difficulties faced by the mining industry in meeting the expectations of local communities and in adequately protecting the natural environment. The impression is often given that the industry was completely oblivious of such concerns and needs until the present decade, and that it is now struggling to make up for past neglect. Certainly the standards required by society as a whole have risen, and there is more public discussion that in earlier times, but the management of many major mining companies have long been fully aware of their obligations to the environment and local communities. To argue otherwise would be to misread the history of the industry and to perform a grave disservice to many dedicated managers of the mining projects of former years. (author)

  8. The US uranium mining industry: 1980 and today

    International Nuclear Information System (INIS)

    Stover, D.E.

    1991-01-01

    In 1980, 16 800 tonnes of uranium were produced in the United States, making it the largest producing nation with about 40% of Western World (WOCA) production. By 1990, US production had fallen to approximately 3500 tonnes U, representing only about 10% of WOCA production. Clearly the US uranium mining industry was strongly altered by the events of the intervening years. Widespread focus on declining prices overshadowed a second important set of events. Namely, the rapidly changing regulatory and environmental atmosphere in the United States which continues adversely to affect conventional uranium mining. As a result of these events, the size and structure of the US uranium mining industry was irrevocably changed. Within this altered industry is a rapidly maturing technology that provides a more efficient and lower-cost means of uranium production, in-situ leaching (ISL). By exploiting the advantages of relatively low capital investments, shorter development times, reduced labour costs, and increased production flexibility of ISL mining, the US uranium mining industry will be a competitive component of the world's uranium supply for the 1990s. (author)

  9. US uranium mining industry: background information on economics and emissions

    International Nuclear Information System (INIS)

    Bruno, G.A.; Dirks, J.A.; Jackson, P.O.; Young, J.K.

    1984-03-01

    A review of the US uranium mining industry has revealed a generally depressed industry situation. The 1982 U 3 O 8 production from both open-pit and underground mines declined to 3800 and 6300 tons respectively with the underground portion representing 46% of total production. US exploration and development has continued downward in 1982. Employment in the mining and milling sectors has dropped 31% and 17% respectively in 1982. Representative forecasts were developed for reactor fuel demand and U 3 O 8 production for the years 1983 and 1990. Reactor fuel demand is estimated to increase from 15,900 tons to 21,300 tons U 3 O 8 respectively. U 3 O 8 production, however, is estimated to decrease from 10,600 tons to 9600 tons respectively. A field examination was conducted of 29 selected underground uranium mines that represent 84% of the 1982 underground production. Data was gathered regarding population, land ownership and private property valuation. An analysis of the increased cost to production resulting from the installation of 20-meter high exhaust borehole vent stacks was conducted. An assessment was made of the current and future 222 Rn emission levels for a group of 27 uranium mines. It is shown that 222 Rn emission rates are increasing from 10 individual operating mines through 1990 by 1.2 to 3.8 times. But for the group of 27 mines as a whole, a reduction of total 222 Rn emissions is predicted due to 17 of the mines being shutdown and sealed. The estimated total 222 Rn emission rate for this group of mines will be 105 Ci/yr by year end 1983 or 70% of the 1978-79 measured rate and 124 Ci/yr by year end 1990 or 83% of the 1978-79 measured rate

  10. US uranium mining industry: background information on economics and emissions

    Energy Technology Data Exchange (ETDEWEB)

    Bruno, G.A.; Dirks, J.A.; Jackson, P.O.; Young, J.K.

    1984-03-01

    A review of the US uranium mining industry has revealed a generally depressed industry situation. The 1982 U/sub 3/O/sub 8/ production from both open-pit and underground mines declined to 3800 and 6300 tons respectively with the underground portion representing 46% of total production. US exploration and development has continued downward in 1982. Employment in the mining and milling sectors has dropped 31% and 17% respectively in 1982. Representative forecasts were developed for reactor fuel demand and U/sub 3/O/sub 8/ production for the years 1983 and 1990. Reactor fuel demand is estimated to increase from 15,900 tons to 21,300 tons U/sub 3/O/sub 8/ respectively. U/sub 3/O/sub 8/ production, however, is estimated to decrease from 10,600 tons to 9600 tons respectively. A field examination was conducted of 29 selected underground uranium mines that represent 84% of the 1982 underground production. Data was gathered regarding population, land ownership and private property valuation. An analysis of the increased cost to production resulting from the installation of 20-meter high exhaust borehole vent stacks was conducted. An assessment was made of the current and future /sup 222/Rn emission levels for a group of 27 uranium mines. It is shown that /sup 222/Rn emission rates are increasing from 10 individual operating mines through 1990 by 1.2 to 3.8 times. But for the group of 27 mines as a whole, a reduction of total /sup 222/Rn emissions is predicted due to 17 of the mines being shutdown and sealed. The estimated total /sup 222/Rn emission rate for this group of mines will be 105 Ci/yr by year end 1983 or 70% of the 1978-79 measured rate and 124 Ci/yr by year end 1990 or 83% of the 1978-79 measured rate.

  11. Role of behavioural factors in green supply chain management implementation in Indian mining industries

    DEFF Research Database (Denmark)

    Muduli, K.; Govindan, Kannan; Barve, A.

    2013-01-01

    Green supply chain management (GSCM) integrates ecological concepts with those of supply chain management in order to minimize energy and material usage and to reduce adverse impacts of supply chain activities on the environment. GSCM implementation in mining industries depends largely upon certain...... be taken as a reference by the decision makers while deciding the hierarchy of action necessary for effective implementation of green practices in mining supply chains. The present research attempts to explore various behavioural factors affecting GCSM practices and their interactions which help to attain...... green-enabled needs. Interpretive structural modelling (ISM) is employed in this research to extract the interrelationships among the identified behavioural factors....

  12. Radiation safety needs for the resurgent uranium mining industry

    International Nuclear Information System (INIS)

    Waggitt, Peter

    2008-01-01

    Full text: After many years in the economic doldrums the world's uranium industry is undergoing a renaissance. The recent rapid price increase for the product and the anticipated market shortfalls in supply of yellowcake have are responsible for this. There is now a rush of new activity: abandoned mines from a previous era are being re-examined for their potential to be re-opened; planning for exploitation of known but undeveloped uranium deposits is proceeding at a rapid pace in many countries new to uranium mining; and finally worldwide exploration activity for uranium is expanding at a great rate with more than 400 companies now claiming to be involved in the uranium mining market. All of there activities have significant implications the radiation protection profession. At every stage of the uranium production cycle, from exploration to mining and processing through to remediation there are requirements for proper radiation protection procedures and regulation. The long period of reduced activity in uranium mining has meant that few young people have been joining the industry over the past 20 years. There is now a shortage of trained and experienced radiation protection professionals associated with the mining industry that cannot be overcome overnight. The paper discusses the development of this situation and the various strategies that are being put in place around the world to improve the situation. In particular the International Atomic Energy Agency has been working with radiation protection authorities and uranium mining industry representatives from around the world to address the issue. The latest developments in this project will be described and the future plans described. (author)

  13. Biotechnological processes in the Canadian mining industry

    International Nuclear Information System (INIS)

    McCready, R.G.L.

    1991-01-01

    Since the initiation of the Federal Government's National Strategy on Biotechnology in 1983, CANMET has coordinated the development of numerous biotechnological processes both for economical metal recovery and for the protection of the environment. This presentation will give a brief overview of the development of in-place, underground bacterial leaching of uranium, the development of in-situ bacterial leaching of copper and zinc, bio recovery of metallic selenium from smelter effluents, the degradation of an organic pollutant from a metal smelter and biological treatment of acidic mine drainage. (author)

  14. Ground engineering principles and practices for underground coal mining

    CERN Document Server

    Galvin, J M

    2016-01-01

    This book teaches readers ground engineering principles and related mining and risk management practices associated with underground coal mining. It establishes the basic elements of risk management and the fundamental principles of ground behaviour and then applies these to the essential building blocks of any underground coal mining system, comprising excavations, pillars, and interactions between workings. Readers will also learn about types of ground support and reinforcement systems and their operating mechanisms. These elements provide the platform whereby the principles can be applied to mining practice and risk management, directed primarily to bord and pillar mining, pillar extraction, longwall mining, sub-surface and surface subsidence, and operational hazards. The text concludes by presenting the framework of risk-based ground control management systems for achieving safe workplaces and efficient mining operations. In addition, a comprehensive reference list provides additional sources of informati...

  15. Ototoxicity in the South African mining industry: a position paper

    CSIR Research Space (South Africa)

    Edwards, AL

    2013-02-01

    Full Text Available Despite the attention that Noise-induced hearing loss (NIHL) prevention has received in the mining industry since 2003 when the milestone to eliminate NIHL was set, the statistics show that NIHL persists as one of the most common occupational...

  16. Ototoxicity in the South African mining industry: a position paper

    CSIR Research Space (South Africa)

    Edwards, AL

    2013-02-01

    Full Text Available This position paper asserts that exposure to chemicals in certain occupations and work activities in the mining industry can lead to ototoxicity which accentuates the problem of noise-induced hearing loss (NIHL). Increased awareness of all factors...

  17. Simulation of Industrial Wastewater Treatment from the Suspended Impurities into the Flooded Waste Mining Workings

    Science.gov (United States)

    Bondareva, L.; Zakharov, Yu; Goudov, A.

    2017-04-01

    The paper is dedicated to the mathematical model of slurry wastewater treatment and disposal in a flooded mine working. The goal of the research is to develop and analyze the mathematical model of suspended impurities flow and distribution. Impurity sedimentation model is under consideration. Due to the sediment compaction problem solution domain can be modified. The model allows making a forecast whether volley emission is possible. Numerical simulation results for “Kolchuginskaya” coal mine presented. Impurity concentration diagrams in outflow corresponding to the real full-scale data obtained. Safely operation time mine workings like a wastewater treatment facility are estimated. The carried out calculations demonstrate that the method of industrial wastewater treatment in flooded waste mine workings can be put into practice but it is very important to observe all the processes going on to avoid volley emission of accumulated impurities.

  18. 30 CFR 785.13 - Experimental practices mining.

    Science.gov (United States)

    2010-07-01

    ... practices granting variances from the special environmental protection performance standards of sections 515... INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS REQUIREMENTS FOR PERMITS FOR SPECIAL CATEGORIES OF MINING § 785.13 Experimental practices...

  19. The Practice of Industrial Policy

    DEFF Research Database (Denmark)

    Much of the information relevant to policy formulation for industrial development is held by the private sector, not by public officials. There is, therefore, fairly broad agreement in the development literature that some form of structured engagement—often referred to as close or strategic...... of poverty reduction. In 2014, the Korea International Cooperation Agency (KOICA) and United Nations University World Institute for Development Economics Research (UNU-WIDER) launched a joint research project: The Practice of Industrial Policy. The aim is to help African policy makers develop better...... coordination between public and private sectors in order to identify the constraints to faster structural transformation and design, implement, and monitor policies to remove them. This book, written by national researchers and international experts, presents the results of that research by combining a set...

  20. Implications of the 1990 ICRP recommendations for the mining industry

    International Nuclear Information System (INIS)

    Fry, R.M.

    1992-01-01

    Significant radiological protection problems arise in the mining and processing of uranium and thorium bearing ores, beach sands and other materials that have enhanced levels of uranium (e.g. phosphate). They are at their most extreme in the underground mining of uranium. Under the new ICRP 60 occupational dose limits it may be necessary to subject virtually all mining operations to some degree of radiological surveillance. There are three principal modes of radiation exposure in uranium mining operations: gamma rays, an external whole body radiation hazard; the inhalation of radon daughter products; and the inhalation of ore dust containing the long-lived alpha emitting daughter products of uranium, principally 230Th and 226Ra. A number of the new recommendations in ICRP60 considered to have significant implications for the mining industry in general and the above mentioned issues in particular are discussed. These include the definition of occupational exposure occupational dose limit, the review of the radon dose limits, the system of radiological protection. The major conclusions and recommendation of the IAEA Technical Committee to Explore the Impact of the new ICRP Occupational Dose Limits in the operation of underground mines are also summarized. 18 refs., 1 tab

  1. Multiplier Accounting of Indian Mining Industry: The Application

    Science.gov (United States)

    Hussain, Azhar; Karmakar, Netai Chandra

    2017-10-01

    In the previous paper (Hussain and Karmakar in Inst Eng India Ser, 2014. doi: 10.1007/s40033-014-0058-0), the concepts of input-output transaction matrix and multiplier were explained in detail. Input-output multipliers are indicators used for predicting the total impact on an economy due to changes in its industrial demand and output which is calculated using transaction matrix. The aim of this paper is to present an application of the concepts with respect to the mining industry, showing progress in different sectors of mining with time and explaining different outcomes from the results obtained. The analysis shows that a few mineral industries saw a significant growth in their multiplier values over the years.

  2. Data Mining Practical Machine Learning Tools and Techniques

    CERN Document Server

    Witten, Ian H; Hall, Mark A

    2011-01-01

    Data Mining: Practical Machine Learning Tools and Techniques offers a thorough grounding in machine learning concepts as well as practical advice on applying machine learning tools and techniques in real-world data mining situations. This highly anticipated third edition of the most acclaimed work on data mining and machine learning will teach you everything you need to know about preparing inputs, interpreting outputs, evaluating results, and the algorithmic methods at the heart of successful data mining. Thorough updates reflect the technical changes and modernizations that have taken place

  3. Public Consultation Processes in Greenland Regarding the Mining Industry

    Directory of Open Access Journals (Sweden)

    Maria Ackrén

    2016-05-01

    Full Text Available Since the Greenland Self-Government Act came into force in 2009, economic development and the right to utilize natural resources in Greenland lies in the hands of the Self-Government. Earlier efforts to establish this authority were made back in the 1970s, when discussions on Home Rule were first on the agenda. Mining industries are not a new activity in Greenland. During the Second World War, Greenlandic cryolite was used to produce aluminum for the North American aircraft industry. Other essential natural resources, such as gold and gemstones, have also received international interest over the years. Greenland's new development aim is to build up a large-scale mining industry. This article elucidates the form of public consultation processes followed in Greenland in connection with two large-scale mining projects and the different views various actors have regarding these events. How did the deliberative democratic process unfold in Greenland regarding these projects? Was the process followed an effective way to manage these kinds of projects? The article shows that two projects that received a lot of media attention: the 2005 iron ore mine project in Isukasia, and the 2001 TANBREEZ-project to extract rare earth elements, used highly different approaches when it comes to deliberative democracy. In the former case, a limited degree of deliberative democracy was used, while in the latter case, the opposite applies.

  4. Global gene mining and the pharmaceutical industry

    DEFF Research Database (Denmark)

    Knudsen, Lisbeth Ehlert

    2005-01-01

    for the Evaluation of Medicinal Products (EMEA) having issued a position paper, the Council for International Organizations of Medical Sciences (CIOMS) having a working group on this issue, and the European Society of Human Genetics preparing background paper on 'Polymorphic sequence variants in medicine: Technical...... may stigmatize patients leading to poor quality of life. This has raised the issue of 'genetic exceptionalism' justifying specific regulation of use of genetic information. Discussions on how to handle sampling and data are ongoing within the industry and the regulatory sphere, the European Agency......, social, legal and ethical issues. Pharmacogenetics as an example'. Within the European project Privacy in Research Ethics and Law (PRIVIREAL), recommendations for common European guidelines for membership in research ethical committees have been discussed, balancing the interests and assuring...

  5. Regulatory and legal aspects in industrial mining industries

    International Nuclear Information System (INIS)

    Magalhaes, Maisa Haiidamus

    2016-01-01

    The regulation between the Brazilian Nuclear Energy Commission - CNEN performance and the mineral industries that produces NORM is presented. Besides the legal aspects, some comments from the point of view of the supervisory and licensing body about their performance in the radiation protection area are pointed out

  6. The South Manchurian Railway Company and the Mining Industry: The Case of the Fushun Coal Mine

    Directory of Open Access Journals (Sweden)

    Tsu-yu Chen

    2015-09-01

    Full Text Available Following the Japanese victory over Czarist Russia in the Russo-Japanese War and the signing of the Treaty of Portsmouth in 1905, the southernmost section of the southern branch of the China Far East Railway (Changchun–Port Arthur was transferred to Japanese control. A new, semi-privately held company, the South Manchuria Railway Company (SMR, Mantetsu, was established with 85.6 percent capitalization by the Japanese government and foreign bonds to operate the railroad and to develop settlements (including highways, public health facilities, educational institutions, and industries (coal mines, harbor facilities, electrical power plants, shale oil plants, chemical plants, and restaurants along its route. SMR nonetheless emphasized railway and mining investment. The centerpiece of its mining interests was the Fushun Coal Mine. Starting in 1917, SMR began to prosper, with most profits coming from its coal mines, and it soon spun off subsidiary companies. In this sense, although the factors that influenced development of the Fushun Coal Mine in each period were different, this development still shows continuity of the business management.

  7. Balancing environmental and industry sustainability: a case study of the US gold mining industry.

    Science.gov (United States)

    Finnie, Bruce; Stuart, Jeffrey; Gibson, Linda; Zabriskie, Fern

    2009-09-01

    Mandatory insurance requirements and/or mitigation fees (royalties) for mining companies may help reduce environmental risk exposure for the federal government. Mining is examined since the Environmental Protection Agency (EPA) Toxic Release Inventory reveals that this sector produces more hazardous waste than any other industrial sector. Although uncommon, environmental expense can exceed hundreds of millions of dollars per development. Of particular concern is the potential for mines to become unfunded Superfund sites. Monte Carlo simulation of risk exposure is used to establish a plausible range of unfunded federal liabilities associated with cyanide-leach gold mining. A model is developed to assess these costs and their impact on both the federal budget and corporate profitability (i.e., industry sustainability), particularly if such costs are borne by offending firms.

  8. Global gene mining and the pharmaceutical industry

    International Nuclear Information System (INIS)

    Knudsen, Lisbeth E.

    2005-01-01

    Worldwide efforts are ongoing in optimizing medical treatment by searching for the right medicine at the right dose for the individual. Metabolism is regulated by polymorphisms, which may be tested by relatively simple SNP analysis, however requiring DNA from the test individuals. Target genes for the efficiency of a given medicine or predisposition of a given disease are also subject to population studies, e.g., in Iceland, Estonia, Sweden, etc. For hypothesis testing and generation, several bio-banks with samples from patients and healthy persons within the pharmaceutical industry have been established during the past 10 years. Thus, more than 100,000 samples are stored in the freezers of either the pharmaceutical companies or their contractual partners at universities and test institutions. Ethical issues related to data protection of the individuals providing samples to bio-banks are several: nature and extent of information prior to consent, coverage of the consent given by the study person, labeling and storage of the sample and data (coded or anonymized). In general, genetic test data, once obtained, are permanent and cannot be changed. The test data may imply information that is not beneficial to the patient and his/her family (e.g., employment opportunities, insurance, etc.). Furthermore, there may be a long latency between the analysis of the genetic test and the clinical expression of the disease and wide differences in the disease patterns. Consequently, information about some genetic test data may stigmatize patients leading to poor quality of life. This has raised the issue of 'genetic exceptionalism' justifying specific regulation of use of genetic information. Discussions on how to handle sampling and data are ongoing within the industry and the regulatory sphere, the European Agency for the Evaluation of Medicinal Products (EMEA) having issued a position paper, the Council for International Organizations of Medical Sciences (CIOMS) having a working

  9. Development and implementation of the Good Neighbor Agreement (GNA) practice in the USA sustainable mining development.

    Science.gov (United States)

    Masaitis, Alexandra

    2014-05-01

    New economic, environmental and social challenges for the mining industry in the USA show the need to implement "responsible" mining practices that include improved community involvement. Conflicts which occur in the US territory and with US mining companies around the world are now common between the mining proponents, NGO's and communities. These conflicts can sometimes be alleviated by early development of modes of communication, and a formal discussion format that allows airing of concerns and potential resolution of problems. One of the methods that can formalize this process is to establish a Good Neighbor Agreement (GNA), which deals specifically with challenges in relationships between mining operations and the local communities. It is a new practice related to mining operations that are oriented toward social needs and concerns of local communities that arise during the normal life of a mine, which can achieve sustainable mining practices. The GNA project being currently developed at the University of Nevada, USA in cooperation with the Newmont Mining Corporation has a goal of creating an open company/community dialog that will help identify and address sociological and environmental concerns associated with mining. Discussion: The Good Neighbor Agreement currently evolving will address the following: 1. Identify spheres of possible cooperation between mining companies, government organizations, and NGO's. 2. Provide an economically viable mechanism for developing a partnership between mining operations and the local communities that will increase mining industry's accountability and provide higher levels of confidence for the community that a mine is operated in a safe and sustainable manner. Implementation of the GNA can help identify and evaluate conflict criteria in mining/community relationships; determine the status of concerns; determine the role and responsibilities of stakeholders; analyze problem resolution feasibility; maintain the community

  10. Lean management implementation in mining industries

    Directory of Open Access Journals (Sweden)

    ALTAIR FLAMARION KLIPPEL

    2008-01-01

    Full Text Available Entre las alternativas para asegurar su supervivencia, una particularmente pertinente para las Organizaciones es la innovación. La innovación tiene varias dimensiones entre que es posible incluir: i materia prima; ii producto; iii proceso; iv mercado; v la manera cómo es realizada la administración. Este artículo tiene el objetivo de mostrar la posibilidad de llevar a cabo una nueva manera de dirección en las industrias de extracción de mineral a través del uso integrado de los conceptos desarrollados en la construcción del Sistema de Producción Toyota (SPT / el Sistema de Producción Lean, y los conceptos y técnicas tradicionales que se originan de la Ingeniería Minera y la Ingeniería Industrial. El artículo muestra esta integración en dos situaciones de la minería (fluorita y amatista. Los resultados indican la reducción del costo de la producción y aumento de la productividad y la mejora de la Calidad de Vida de Trabajadores.

  11. Companies closely concerned with the mining industry have a training requirement

    International Nuclear Information System (INIS)

    Grossekemper, H.J.; Schmidt, B.; Schulenberg, F.

    1994-01-01

    In view of the serious economic situation the future decisions are extremely difficult for some companies closely concerned with the mining industry. The required orientation of the company towards new markets and new products requires not less, but more training and rethinking in all company divisions: from business management via personnel management to plant organisation and from marketing via development to quality assurance. This is proved by practical examples. An analysis by the ''Training'' working group has produced valuable information on the actual training requirement in the North Rhine-Westphalian engineering industry. It has worked out the concrete situation of the companies closely concerned with the mining industry in North Rhine-Westphalia from the point of view of their own training requirements. It is now the task of each individual company to analyse and reflect its concrete situation against the mirror of the results and to base the specific training requirement on the company aim. (orig.)

  12. A Long-Term Mathematical Model for Mining Industries

    OpenAIRE

    Achdou , Yves; Giraud , Pierre-Noel; Lasry , Jean-Michel; Lions , Pierre-Louis

    2016-01-01

    International audience; A parcimonious long term model is proposed for a mining industry. Knowing the dynamics of the global reserve, the strategy of each production unit consists of an optimal control problem with two controls, first the flux invested into prospection and the building of new extraction facilities, second the production rate. In turn, the dynamics of the global reserve depends on the individual strategies of the producers, so the models leads to an equilibrium, which is descr...

  13. What the coal industry requires from young mining engineers

    Energy Technology Data Exchange (ETDEWEB)

    Zilligen, K H

    1986-04-24

    A colliery manager gives his opinions on the requirements of the industry from young graduates of the Technical College of Mining in the Federal Republic of Germany. He suggests that there is a need for young, well educated graduates from colleges and universities; that all young engineers should start their careers in line management; and that technical college education should be operationally relevant. Suggestions are given for improving the current trainee programme at Minster Achenbach colliery.

  14. A review of the environmental management practices in the Indian mining sector

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, S.P.

    2005-06-01

    The article, by the former director of the Indian school of Mines, Dhanbad, covers the major environmental management issues common to the majority of India's mining projects and gives recommendations for further improving practices, such as mine planning, fly ash utilization and conversion of mined lands to agriculture. India is likely to expand activities in mining of coal, iron ores, limestone and bauxite, mostly through opencast mining. The article mentions the regulations controlling environmental impacts of mining, the 1986 Environmental Protection Act and other measures. The 1994 Environmental Impact Assessment process was modified in 1997 to include the concept of public hearing. In 2003 the requirement of public hearing was limited to mines with lease area above 25 ha. In 2003 the Mineral Conservation and Development rules were amended to improve protection of the environment, reclamation and rehabilitation measures. Further deforestation cannot be avoided but the industry record for creating new forests on mined areas is improving. Issues of waste water treatment and dust abatement are outlined. 8 refs.

  15. Occupational dermatoses in the uranium mining and processing industry

    Energy Technology Data Exchange (ETDEWEB)

    Sevcova, M [Zavodni Ustav Narodniho Zdravi Uranoveho Prumyslu, Pribram (Czechoslovakia)

    1978-04-01

    Experience gained so far by the Department of Dermatovenerology in the uranium industry discloses that the incidence of occupational dermatoses is relatively low in this industry. It represents about 1% of all newly ascertained skin diseases per year. Allergic contact eczemas after having been in contact with rubber products, chiefly rubber boots, predominate. Under the working conditions in mining and preparing uranium ore, ionizing radiation cannot induce non-stochastic effects of the type of radiation dermatitis on the skin. A higher incidence was, however, ascertained in uranium miners of basaliomas, which agrees with the estimation of the dose of external alpha radiation in the basal epidermis layer.

  16. Domestic uranium mining and milling industry: 1986 viability assessment

    International Nuclear Information System (INIS)

    1987-01-01

    This report presents the fourth annual assessment of the domestic uranium mining and milling industry's resource capability, supply response capability, financial capability, and import commitment dependency. The data and analysis in support of this assessment and the report itself have been developed pursuant to Public Law 97-415, the Nuclear Regulatory Commission (NRC) Authorization Act of 1982. The report provides information on recent uranium supply, demand, and marketing conditions, as well as projections of the domestic uranium industry's ability to continue to supply the needs of the domestic nuclear power industry through the year 2000. Industry capability is assessed under a variety of assumed conditions with respect to hypothetical disruptions of uranium imports. 13 refs., 26 figs., 37 tabs

  17. Domestic uranium mining and milling industry. 1984 viability assessment

    International Nuclear Information System (INIS)

    1985-01-01

    This report presents the second annual assessment of the domestic uranium mining and milling industry's resource capability, supply response capability, financial capability, and import commitment dependency. The data and analysis in support of this assessment and the report itself have been developed pursuant to requirements set forth in Section 23(b) of Public Law 97-415, the Nuclear Regulatory Commission (NRC) Authorization Act, which was enacted on January 4, 1983. The report provides information on recent uranium supply, demand, and marketing conditions and projections of the domestic uranium industry's ability to continue to supply the needs of the domestic nuclear power industry through the year 2000. Industry capability is assessed under a variety of assumed conditions with respect to hypothetical disruptions of uranium imports

  18. Physical capacity of rescue personnel in the mining industry

    Directory of Open Access Journals (Sweden)

    Hunt Andrew P

    2008-10-01

    Full Text Available Abstract Background The mining industry has one of the highest occupational rates of serious injury and fatality. Mine staff involved with rescue operations are often required to respond to physically challenging situations. This paper describes the physical attributes of mining rescue personnel. Methods 91 rescue personnel (34 ± 8.6 yrs, 1.79 ± 0.07 m, 90 ± 15.0 kg participating in the Queensland Mines Rescue Challenge completed a series of health-related and rescue-related fitness tasks. Health-related tasks comprised measurements of aerobic capacity (VO2max, abdominal endurance, abdominal strength, flexibility, lower back strength, leg strength, elbow flexion strength, shoulder strength, lower back endurance, and leg endurance. Rescue-related tasks comprised an incremental carry (IC, coal shovel (CS, and a hose drag (HD, completed in this order. Results Cardiovascular (VO2max and muscular endurance was average or below average compared with the general population. Isometric strength did not decline with age. The rescue-related tasks were all extremely demanding with heart rate responses averaging greater than 88% of age predicted maximal heart rates. Heart rate recovery responses were more discriminating than heart rates recorded during the tasks, indicating the hose drag as the most physically demanding of the tasks. Conclusion Relying on actual rescues or mining related work to provide adequate training is generally insufficient to maintain, let alone increase, physical fitness. It is therefore recommended that standards of required physical fitness be developed and mines rescue personnel undergo regularly training (and assessment in order to maintain these standards.

  19. The role of waste sorting in the South African gold-mining industry

    International Nuclear Information System (INIS)

    Freer, J.S.; Boehme, R.C.

    1985-01-01

    The absolute potential for sorting waste from run-of-mine Witwatersrand gold ores normally lies between 60 and 90 per cent by mass. At present, the practical potential lies between 40 and 50 per cent. Yet few mines achieve a waste rejection of even 30 per cent. The average waste rejection for industry, including underground sorting, fell from 19,6 per cent in 1959 to 10,1 per cent in 1983, as industry moved from labour-intensive, multistage comminution, incorporating washing, screening, and sorting, to single-stage run-of-mine milling. Most of the sorting is still being done by hand; yet photometric and radiometric sorting machines of high capacity are available. More recently, a sorter based on neutron activation and the subsequent isomeric radioactive decay of gold itself was designed. This paper examines the case for an increased role for sorting in the South African gold-mining industry brought about by the increasing cost of power for milling and the possibility of extracting gold from low-grade reject fractions by heap leaching

  20. Strategic Implications of Water Usage: an Analysis in Brazilian Mining Industries

    Directory of Open Access Journals (Sweden)

    Roberto Schoproni Bichueti

    2014-04-01

    Full Text Available This study aims at identifying the practices of water use management and the business performance in industries in the Brazilian mineral sector. To this end, a descriptive and quantitative study was developed, using the survey method, in industries associated with the Brazilian Mining Institute – IBRAM. The water use management practices were identified based in a model addressing the following aspects: water accounting, risk assessment, direct operations, supply chain, and stakeholders engagement. The business performance was measured from a model involving the following dimensions: economic, environmental and social. Among the results, the risks assessment involved and the direct operations practices stand out, in order to reduce the amount of water used and waste discharges. The need for greater engagement of industries with the stakeholders and the supply chain, through a more integrated and collaborative management, was also evident.

  1. Guidebook on good practice in the management of uranium mining and mill operations and the preparation for their closure

    International Nuclear Information System (INIS)

    1998-12-01

    Over the past fifty years the uranium industry has moved from a labor-intensive industry to a 'high-tech' and capital intensive industry. Organization of knowledge, manpower and material had to change to meet the demands of several stakeholders inherent to any project and to constantly adapt to technological innovations. Today, the mission of a uranium operation is not only to make a profit while selling yellow cake to electrical power stations but also to address issues regarding safety, health, environment and demands of the regulators and the public and assure the sustainability of the operations. Good mining practice begins with the proper planning and forecasting from the discovery of a deposit to decommissioning of a mine. This report describes and defines what is considered as good practice in the various activities of a mining operation and provides an overview of the management of a single operation. As technologies are progressing rapidly in the mining industry, and as this industry is transitional, this report emphasizes the importance of training employees at all levels of the organization. The statement on good practices for the various activities of a mining operation will be useful for organizations which are planning to open new mines or intend to modernize ongoing operations. Practical examples are given in the case of histories for four different countries. The objective of this publication is not to provide strict rules on the application of good practice but to give general guidelines that can be consulted and used in many different countries

  2. A Study on regeneration cases with industrial Heritage in mining areas of Korea

    Science.gov (United States)

    Cho, Seungyeoun; Ji, Sangwoo; Yim, Giljae

    2017-04-01

    The mining areas have to face urban decline problem in population and aging after its closing. Many mines were shut down due to changes in industrial structure through 20 century. Central and local governments has been trying to solve urban decline of abandoned mine areas by enacting special acts or introducing support programs for decades. In the year of 1995, South Korean government also enacted "Special act on the assistance to the development of abandoned mine areas" to promote the economy of abandoned mine areas that is depressed following the decline of the coal industry and to help balanced regional development and to improve the living standard of the residents in such abandoned mine areas. Local authorities has been trying to revitalize the regional economy by attracting tourism industry under the financial support and deregulation by this special law. With this background, this study analysis 13 regeneration cases which are utilizing the industrial heritage of the abandoned area in S. Korea. Despite the importance of mining, negative images of abandon mine have been engraved due to environmental destruction. Most of abandoned mines were left without any action since its closing. Early stage of abandoned mine area regeneration, such as Sabuk, Munkyong, are focusing on adjacent land not on abandoned mine. Abandoned mines were restored its original state and theme park including hotels, casinos and other tourist facilities were developed on adjacent land. Eco-trails on some granite caves such as Jungsun were opened to the public as natural resources not industrial heritage. The industrial heritage was very restricted to making museums about history of mining industry. However, there has been a significant change in perception toward reusing industrial heritage for urban regeneration in recent years. From the viewpoint of urban regeneration, abandon mine areas and its facilities are receiving attention as important regional assets as industrial heritage to

  3. Spanish mining industry. Working mines. Research. Equipment. La mineria espanola. Explotaciones. Investigacion. Equipos

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The Spanish mining industry and the work of the organizations AITEMIN (Asociacion de Investigacion Tecnologica de Equipos Mineros), Laboratorio Oficial J.M. Madariaga, Instituto Geologico y Minero de Espana and Empresa Nacional Adaro de Investigaciones Mineras S.A. are described. A list of firms which are members of AITEMIN or SERCOBE (Asociacion Nacional de Fabricantes de Bienes de Equipo) is given. For each firm, the address and equipment manufactured is included.

  4. Optimal grade control sampling practice in open-pit mining

    DEFF Research Database (Denmark)

    Engström, Karin; Esbensen, Kim Harry

    2017-01-01

    Misclassification of ore grades results in lost revenues, and the need for representative sampling procedures in open pit mining is increasingly important in all mining industries. This study evaluated possible improvements in sampling representativity with the use of Reverse Circulation (RC) drill...... sampling compared to manual Blast Hole (BH) sampling in the Leveäniemi open pit mine, northern Sweden. The variographic experiment results showed that sampling variability was lower for RC than for BH sampling. However, the total costs for RC drill sampling are significantly exceeding current costs...... for manual BH sampling, which needs to be compensated for by other benefits to motivate introduction of RC drilling. The main conclusion is that manual BH sampling can be fit-for-purpose in the studied open pit mine. However, with so many mineral commodities and mining methods in use globally...

  5. Recent trends in Cuba’s mining and petroleum industries

    Science.gov (United States)

    Wacaster, Susan; Baker, Michael S.; Soto-Viruet, Yadira; Textoris, Steven D.

    2015-03-31

    In response to recent diplomatic developments between Cuba and the United States, the National Minerals Information Center compiled available information on the mineral industries of Cuba. This fact sheet highlights a new map and table that identify mines, mineral processing facilities, and petroleum facilities as well as information on location, operational status, and ownership. It also addresses the current status of known mineral industry projects, historical developments, and trends of the Cuban economy with an emphasis on mineral industries, and the supply and demand for Cuba’s mineral resources.In 2013, Cuba was estimated to be among the world’s top ten producers of cobalt and nickel, which are the country’s leading exports. Cuba’s current crude oil and associated natural gas production from onshore and shallow water coastal reservoirs is approximately 50,000 barrels per day of liquids and about 20,000 barrels per day oil equivalent of natural gas. In 2013, the value of mining and quarrying activities accounted for 0.6 percent of Cuba’s gross domestic product (GDP), compared with 1.4 percent in 2000. The value of production from Cuba’s industrial manufacturing sector increased by 88 percent between 1993 and 2013, whereas the sector’s share in the GDP decreased by about 3 percent during the same time period reflecting economic growth in other sectors of the economy.

  6. Corporate social responsibility in the mining industry: Criteria and indicators

    International Nuclear Information System (INIS)

    Vintro, Carla; Comajuncosa, Josep

    2010-01-01

    Corporate Social Responsibility (CSR) includes economic, social and environmental aspects, and it has particular significance in mining. This paper explores the subject of CSR in the mining industry and the main synergies between CSR and environmental, safety and quality management systems, whose adoption has increased during recent decades. It proposes the establishment of a set of criteria for sustainability, ethics and human capital (to be called CSR criteria). Whilst various international bodies have proposed CSR guides and indicators (commonly used as references for Stock Market investments), there is evidence that the size of the company can act as a moderator factor to the adoption of those systems. The paper offers an easy-to-use CSR performance chart (composed of 31 indicators and a global index), intended as an internal measure for companies of CSR continuous improvement.

  7. ANALYSIS METHODS OF BANKRUPTCY RISK IN ROMANIAN ENERGY MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    CORICI MARIAN CATALIN

    2016-12-01

    Full Text Available The study is an analysis of bankruptcy risk and assessing the economic performance of the entity in charge of energy mining industry from southwest region. The scientific activity assesses the risk of bankruptcy using score’s method and some indicators witch reflecting the results obtained and elements from organization balance sheet involved in mining and energy which contributes to the stability of the national energy system. Analysis undertaken is focused on the application of the business organization models that allow a comprehensive assessment of the risk of bankruptcy and be an instrument of its forecast. In this study will be highlighted developments bankruptcy risk within the organization through the Altman model and Conan-Holder model in order to show a versatile image on the organization's ability to ensure business continuity

  8. Observations on strategic planning of information technology in the Indian coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Owen, D.

    1988-05-01

    A view of the needs and plans to improve the coal mining industry of India is presented, focusing primarily on telecommunications and computerization. Further, details on mining electronics and vendor relationships with foreign firms are also discussed. 4 refs.

  9. Literature review of labour turnover and absenteeism costs in the coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Woolf, A.

    1977-01-01

    This paper includes labor turnover formulae, turnover costs, and turnover rates for the mining industry. Few meaningful studies or reports on absenteeism costs and labour turnover in mining were retrieved.

  10. Applying a small NPP in the Argentine mining industry

    International Nuclear Information System (INIS)

    Barrientos, C.J.; Masriera, N.A.

    1998-01-01

    The CAREM 25 reactor project is a small PWR nuclear power plant of 27 MWe, based on advanced concepts: a self-pressurized integral primary with natural convection of the coolant and a more simple and reliable general design. The CAREM concept has many advantages as a power generator in small electrical grids. Besides, there are some non-electrical applications under consideration, since a co-generation scheme seems very interesting from the economical point of view. In this category two alternatives have been considered: a standard desalination facility and a process plant in the mining industry. In this paper, a conceptual analysis of the second alternative is presented. Mining is a branch of the domestic industry that has shown a remarkable growth in the past three years mainly due to a steady inflow of foreign investments (about two billion dollars for that period). And one of the most attractive markets is in the extraction and manufacturing of non-ferrous minerals, coming from deposits in the northwest of Argentina: sodium sulfate, lithium salts, and boron compounds. Nevertheless it faces an unsolved problem in the energy high prices due to the fact that the production sites are located in remote areas where the only achievable energy source is the transportation of fuel oil. In this scenario, a small NPP may be a competitive source of process heat and electricity, with enough autonomy to uncouple fuel requirements from production strategies. The present study analyses the possible application of the CAREM concept in the non-ferrous mining industry of the Northwest of Argentina, considering a co-generation scheme. The main results of this analysis and the inherent advantages of the approach, show that the alternative may be feasible both from the technical and the economical points of view. (author)

  11. SIMULATION AS PART OF INDUSTRIAL PRACTICE

    Directory of Open Access Journals (Sweden)

    Miriam Pekarčíková

    2015-06-01

    Full Text Available Article discusses the simulation as an efficient scientific method of problem solving in industrial practice. It creates an overview of the simulation program means used in industrial practice and creates an overview of tools for discrete, continuous, and combined.

  12. Environmentally sound development in the energy and mining industries

    International Nuclear Information System (INIS)

    1987-01-01

    The paper contains the proceedings of a seminar on Strategies for Environmentally Sound Development in the Energy and Mining Industries, Crete, 1984. The seminar was structured around the following themes: 1) oil and gas exploration and production, 2) water power generation and storage projects, 3) electricity generating facilities, 4) restoration and after-use of disturbed land, 5) mineral development, 6) mineral and energy resources in fragile and remote ecosystems, and 7) general environmental issues. Two papers from the seminar were chosen and indexed separately. (U.K.)

  13. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    Energy Technology Data Exchange (ETDEWEB)

    Kenneth L. Knittel

    2005-05-09

    The work performed on this program was to develop wear resistant, tough FM composite materials with efforts focused on WC-Co based FM systems. The materials were developed for use in mining industry wear applications. Components of interest were drill bit inserts for drilling blast holes. Other component applications investigated included wear plates for a variety of equipment such as pit shovels, wear surfaces for conveyors, milling media for ball milling operations, hydrocyclone cones, grader blades and dozer teeth. Cross-cutting technologies investigated included hot metal extrusion dies, drill bits for circuit board fabrication, cutting tools for cast iron and aluminum machining. An important part of the work was identification of the standard materials used in drilling applications. A materials trade study to determine those metals and ceramics used for mining applications provided guidance for the most important materials to be investigated. WC-Co and diamond combinations were shown to have the most desirable properties. Other considerations such as fabrication technique and the ability to consolidate shifted the focus away from diamond materials and toward WC-Co. Cooperating partners such as Kennametal and Kyocera assisted with supplies, evaluations of material systems, fabricated parts and suggestions for cross-cutting technology applications for FM architectures. Kennametal provided the raw materials (WC-Co and Al-TiCN powders) for the extent of the material evaluations. Kyocera shared their research into various FM systems and provided laboratory testing of fabricated materials. Kyocera also continued research of the FM systems with the intention of developing commercial markets for a variety of applications. The continued development of FM technology by Kyocera is seen as a direct result of the cooperation established under this funding. Kyocera has a specific interest in the commercial development of the FM technology and have licensed it and have paid

  14. Mining in the Federal Republic of Germany 2012. Mining industries and statistics. 64th year 2013. Documentation

    International Nuclear Information System (INIS)

    2013-11-01

    The annual report of the series ''The mining industry in the Federal Republic of Germany - Mountain Economics and Statistics'' is published by the Federal Ministry of Economics and Technology in cooperation with the mining authorities of the federal states. It contains comprehensive data of all production facilities of mining industry in Germany and describes the position of the German industry in the context of the overall economic development. The report shows an interest in local raw materials as well as on the international raw materials economy. Moreover, the present publication provides a detailed statistics section. [de

  15. Data mining application in industrial energy audit for lighting

    Energy Technology Data Exchange (ETDEWEB)

    Maricar, N.M.; Kim, G.C.; Jamal, N. [Kolej Univ., Melaka (Malaysia). Faculty of Electrical Engineering

    2005-07-01

    A data mining application for lighting energy audits at industrial sites was presented. Data collection was based on the parameters needed for the analysis part of the audit. Data collection included the activity for which the room was used; its dimension; light level readings in lux; the number of luminaries; the number of lamps per luminaries; lamp fixtures; and lamp wattage. The lumen method was used to calculate the recommended numbers of luminaries in the room. The number was then compared with the existing system's luminaries. The installed load efficacy ratio (ILER) was then used to determine proper retrofit action to maximize energy usage. The difference between the calculated lux and the standard lux was used to create data subsets. A data mining algorithm was used to determine that the ILER plays an important role in calculating the efficiency of lighting systems. It was also concluded that the method can be used to minimize the time needed to analyze large amounts of lighting data. The results of case studies were also used to show that the combined data mining algorithm provided accurate assessments using existing calculated data. 7 refs., 8 tabs., 5 figs.

  16. Economic statistics for the mining and metallurgical industries: 1990. Statistique economique des industries extractives et metallurgiques annee 1990

    Energy Technology Data Exchange (ETDEWEB)

    Rzonzef, L.

    1991-01-01

    Provides economic statistics for the Belgian mining and metallurgical industries in 1990. The review is divided into 4 parts: the extractive industries (including an analysis of the coal market and mines, quarries and associated industries); coke and briquette making; metallurgy (i.e. blast furnaces, steel making, rolling mills and manpower and materials consumption in the steel industry); and the extraction of sand from the Belgian continental shelf. 17 tabs.

  17. The Empirical Relationship between Mining Industry Development and Environmental Pollution in China.

    Science.gov (United States)

    Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

    2017-03-02

    This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3) tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries.

  18. The Empirical Relationship between Mining Industry Development and Environmental Pollution in China

    Directory of Open Access Journals (Sweden)

    Gerui Li

    2017-03-01

    Full Text Available This study uses a vector autoregression (VAR model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1 because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2 chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3 tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries.

  19. Practicing industrial safety - issues involved

    International Nuclear Information System (INIS)

    Gunasekaran, P.

    2016-01-01

    Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

  20. Blasting activity of the mining industry in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Richards, P.G. [Lamont-Doherty Earth Observatory, Palisades, NY (United States)

    1994-12-31

    About 2 megatons of chemcial explosives are used annually in the U.S., principally in mining for coal and metal ores. Most of this explosive is used in surface mines rather than underground mines. On a typical work day there are about 30 explosions greater than 50 tons, including one shot greater than 200 tons. Shots in underground mines are typically much smaller, because of safety considerations. Almost all chemical explosions above 1 ton in the U.S. are ripple-fired and almost all above 10 tons are also shallow. Almost all are intended to break rock or to remove overburden, and are therefore very inefficient, relative to contained single shots, in generating seismic signals at regional ore teleseismic distances. These attributes make explosions used in industry quite different from the Non-Proliferation Experiment. There is very little correlation between the total amount of explosive used in a ripple-fired blast, and the seismic magnitude. Statistics on blasting magnitudes are of interest in the context of monitoring network. There is a blast reported with regional (or duration) magnitude 3.5 or above, in the U.S., a few tens of times a year; but it would appear that the teleseismic magnitude (m{sub b}) of such events are significantly lower than 3.5. Only about 10 to 30 chemical explosions per year in the U.S. are detected teleseismically with m{sub b}>3. Methods of routinely discriminating most chemical explosions from other seismic sources use spectra of regional phases at frequencies up to about 30 Hz, which is significantly higher than frequencies needed for recording teleseismic signals. The best discriminants appear to be the high-frequency spectral ratio of waves with P-wave energy (e.g. Pn or Pg) to waves with S-wave energy (Sn or Lg); and the use of spectrograms, which can be particularly useful in identifying ripple-firing.

  1. Code of practice on radiation protection in the mining and milling of radioactive ores 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This Code was formulated under provisions of the Environment Protection (Nuclear Codes) Act 1978 in close consultation with the Governments of the States and the Northern Territory. It is a major revision of the Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores (1980), incorporating changes flowing from advances in internationally agreed radiation protection philosophy, and experience gained in Australia in uranium mining and milling operations and the extraction of monazite from mineral sands. The Code specifies the standards, practices, procedures, and measures to prevent or limit risk to employees and to the public from uranium mining and milling, mineral sands operations and extraction of radioactive ores. To assist the industry in meeting the requirements and responsibilities imposed by the Code, guidelines to the former Code will be reviewed and, if appropriate, revised. New guidelines to assist compliance with changed requirements will also be prepared. The Act provides for the revision of codes of practice. The Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores (1987) will be reviewed from time to time and revised if necessary to ensure that the highest standards of radiation protection in the mining and milling of radioactive ores are maintained.

  2. Code of practice on radiation protection in the mining and milling of radioactive ores 1987

    International Nuclear Information System (INIS)

    1987-01-01

    This Code was formulated under provisions of the Environment Protection (Nuclear Codes) Act 1978 in close consultation with the Governments of the States and the Northern Territory. It is a major revision of the Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores (1980), incorporating changes flowing from advances in internationally agreed radiation protection philosophy, and experience gained in Australia in uranium mining and milling operations and the extraction of monazite from mineral sands. The Code specifies the standards, practices, procedures, and measures to prevent or limit risk to employees and to the public from uranium mining and milling, mineral sands operations and extraction of radioactive ores. To assist the industry in meeting the requirements and responsibilities imposed by the Code, guidelines to the former Code will be reviewed and, if appropriate, revised. New guidelines to assist compliance with changed requirements will also be prepared. The Act provides for the revision of codes of practice. The Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores (1987) will be reviewed from time to time and revised if necessary to ensure that the highest standards of radiation protection in the mining and milling of radioactive ores are maintained

  3. The Empirical Relationship between Mining Industry Development and Environmental Pollution in China

    OpenAIRE

    Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

    2017-01-01

    This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) che...

  4. Applications of radio frequency identification systems in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Hind, D J [Davis Derby Ltd., Derby (United Kingdom)

    1995-07-01

    Radio Frequency Identification Systems (RFID) are one of the automatic data capture technologies taking over from bar codes and magnetic swipe cards in many applications involving automatic hands free operation in arduous environments. RFID systems are based on the use of miniature radio transponders carrying encoded electronic data that is used to uniquely identify the identity of transponders. This paper reviews the types of system available and compares the various techniques involved in the different systems. The various types of transponder are described including the latest state of the art passive read/write high performance types. A review of the history of RFID systems in the mining industry is also given in the paper. The problems involved in designing and certifying a system for use in hazardous areas are also described, with particular reference to the problems of inadvertent detonator ignition by radio systems. Applications of RFID systems in the mining industry are described in considerable detail, covering applications both on the surface and underground. 1 ref., 12 figs., 1 tab.

  5. Practical mine ventilation optimization based on genetic algorithms for free splitting networks

    Energy Technology Data Exchange (ETDEWEB)

    Acuna, E.; Maynard, R.; Hall, S. [Laurentian Univ., Sudbury, ON (Canada). Mirarco Mining Innovation; Hardcastle, S.G.; Li, G. [Natural Resources Canada, Sudbury, ON (Canada). CANMET Mining and Mineral Sciences Laboratories; Lowndes, I.S. [Nottingham Univ., Nottingham (United Kingdom). Process and Environmental Research Division; Tonnos, A. [Bestech, Sudbury, ON (Canada)

    2010-07-01

    The method used to optimize the design and operation of mine ventilation has generally been based on case studies and expert knowledge. It has yet to benefit from optimization techniques used and proven in other fields of engineering. Currently, optimization of mine ventilation systems is a manual based decision process performed by an experienced mine ventilation specialist assisted by commercial ventilation distribution solvers. These analysis tools are widely used in the mining industry to evaluate the practical and economic viability of alternative ventilation system configurations. The scenario which is usually selected is the one that reports the lowest energy consumption while delivering the required airflow distribution. Since most commercial solvers do not have an integrated optimization algorithm network, the process of generating a series of potential ventilation solutions using the conventional iterative design strategy can be time consuming. For that reason, a genetic algorithm (GA) optimization routine was developed in combination with a ventilation solver to determine the potential optimal solutions of a primary mine ventilation system based on a free splitting network. The optimization method was used in a small size mine ventilation network. The technique was shown to have the capacity to generate good feasible solutions and improve upon the manual results obtained by mine ventilation specialists. 9 refs., 7 tabs., 3 figs.

  6. Metallurgical engineering and inspection practices in the chemical process industries

    International Nuclear Information System (INIS)

    Moller, G.E.

    1987-01-01

    The process industries, in particular the petroleum refining industry, adopted materials engineering and inspection (ME and I) practices years ago and regularly updated them because they were faced with the handling and refining of flammable, toxic, and corrosive feed stocks. These industries have a number of nonproprietary techniques and procedures, some of which may be applicable in the nuclear power generation field. Some specific inspection and engineering techniques used by the process industries within the framework of the guidelines for inspections and worthy of detailed description include the following: (1) sentry drilling or safety drilling of piping subject to relatively uniform corrosion, such as feedwater heater piping, steam piping, and extraction steam piping; (2) on-stream radiography for thickness measurement and detection of unusual conditions - damaged equipment such as valve blockage; (3) critical analysis of the chemical and refining processes for the relative probability of corrosion; (4) communication of valuable experience within the industry; (5) on-stream ultrasonic thickness testing; and (6) on-stream and off-stream crack and flaw detection. The author, trained in the petroleum refining industry but versed in electric utilities, pulp and paper, chemical process, marine, mining, water handling, waste treatment, and geothermal processes, discusses individual practices of these various industries in the paper

  7. Tools of Realization of Social Responsibility of Industrial Business for Sustainable Socio-economic Development of Mining Region's Rural Territory

    Science.gov (United States)

    Jurzina, Tatyana; Egorova, Natalia; Zaruba, Natalia; Kosinskij, Peter

    2017-11-01

    Modern conditions of the Russian economy do especially relevant questions of social responsibility of industrial business of the mining region for sustainable social and economic development of rural territories that demands search of the new strategy, tools, ways for positioning and increase in competitiveness of the enterprises, which are carrying out the entrepreneurial activity in this territory. The article opens problems of an influence of the industrial enterprises on the territory of presence, reasons the theoretical base directed to the formation of practical tools (mechanism) providing realization of social responsibility of business for sustainable social and economic development of rural territories of the mining region.

  8. Tools of Realization of Social Responsibility of Industrial Business for Sustainable Socio-economic Development of Mining Region's Rural Territory

    Directory of Open Access Journals (Sweden)

    Jurzina Tatyana

    2017-01-01

    Full Text Available Modern conditions of the Russian economy do especially relevant questions of social responsibility of industrial business of the mining region for sustainable social and economic development of rural territories that demands search of the new strategy, tools, ways for positioning and increase in competitiveness of the enterprises, which are carrying out the entrepreneurial activity in this territory. The article opens problems of an influence of the industrial enterprises on the territory of presence, reasons the theoretical base directed to the formation of practical tools (mechanism providing realization of social responsibility of business for sustainable social and economic development of rural territories of the mining region.

  9. Ergonomics as a practice for safe and healthy mining in South African mines

    CSIR Research Space (South Africa)

    Schutte, S

    2011-04-01

    Full Text Available Reducing occupational injuries and ill health is a strategic objective of all the stakeholders in the South African mining industry. In order to achieve this objective, it is necessary to provide the safest and healthiest work environment possible...

  10. Corrosion and anticorrosion. Industrial practice

    International Nuclear Information System (INIS)

    Beranger, G.; Mazille, H.

    2002-01-01

    This book comprises 14 chapters written with the collaboration of about 50 French experts of corrosion. It is complementary to another volume entitled 'corrosion of metals and alloys' and published by the same editor. This volume comprises two parts: part 1 presents the basic notions of corrosion phenomena, the properties of surfaces, the electrochemical properties of corrosion etc.. Part 2 describes the most frequent forms of corrosion encountered in industrial environments and corresponding to specific problems of protection: marine environment, atmospheric corrosion, galvanic corrosion, tribo-corrosion, stress corrosion etc.. The first 8 chapters (part 1) treat of the corrosion problems encountered in different industries and processes: oil and gas production, chemical industry, phosphoric acid industry, PWR-type power plants, corrosion of automobile vehicles, civil engineering and buildings, corrosion of biomaterials, non-destructive testing for the monitoring of corrosion. The other chapters (part 2) deal with anticorrosion and protective coatings and means: choice of materials, coatings and surface treatments, thick organic coatings and enamels, paints, corrosion inhibitors and cathodic protection. (J.S.)

  11. INFLUENCE OF MINING AND METAL INDUSTRY ON PHYSCIA LICHENS

    Directory of Open Access Journals (Sweden)

    Kachinskaya V.V.

    2015-04-01

    Full Text Available The comparative analysis of lichens Physcia. Рopulation at different levels of aerotechnogenic pollution of industrial mining – metallurgical complex of Krivyi Rig Basin. In the highway area there was found the worsening living conditions of thallus at the lichens Physcia, manifested in the reduction of a projective cover and reducing of the size of thallus with the increasing of the degree of their damage. It is set that specific composition and conformities to law of distribution of cladinas is determined the type of the industrial loading. Predominance at the lichens of crustaceous cladinas, insignificant participation of fissile cladinas and complete absence of bushy forms is the possible consequence of industrial influence. We registered some 3 species of epiphytic lichens, namely Phaeophyscia nigricans, Physcia tenella, Physcia adscendens in a residential zone, while on conditional control area we found Physcia orbicularis. The dominant species was scum-like shape Phaeophyscia nigricans, Physcia adscendens, Physcia tenella, while on conditional control region we marked predominance of Physcia orbicularis and did not registered bushy lichens form. We also divided the lichens into two groups according to the resistance towards air pollution - moderate (2 species, Phaeophyscia nigricans, Physcia tenella and toxic-resistant (2 species, Physcia orbicularis, Physcia adscendens. Epiphytic lichens in terms of residential areas compared to conventionally control area characterized by a decrease of morphometric parameters of the melt. Key results can be used to predict the state of ecosystems using lichenoindication in terms of industrial regions of Ukraine.

  12. What role can ISO 17025 play in the South African mining industry? ; Article

    CSIR Research Space (South Africa)

    Pretorius, CJ

    2013-03-01

    Full Text Available -1 Journal of the Mine Ventilation Society of South Africa March 2013/ Vol 66(1), pp 15-17 What role can ISO 17025 play in the South African mining industry? Pretorius CJ1 and Chesalokile T2 1CSIR. Centre for Mining Innovation 2South African...

  13. The future of European mining: What should our mining industry learn from the Skouries and Rosia Montana community gold conflicts

    Science.gov (United States)

    Hardy, Liam; Heller, Shaun; Faltyn, Rowan; Stefanaki, Anna; Economidou, Romina; Savin, Irina; Hood, Leo; Conway, Christopher

    2017-04-01

    The popular image of mining portrayed by media and by a majority of public opinion is a dominantly negative one. From worker's rights to environmental damages, disasters such as the Copiapó mine collapse (Chile), the acid mine drainage at Lousal (Portugal) and the Pb contamination of waters around the Tyndrum mines (Scotland) overshadow initiatives like the ICMM. Some companies receive little praise despite creating active community education and investment projects, while others simply build higher barbed wire fences and attempt to weather the protests, budgeting them into mine life assessments. This image problem, combined with the decentralised political segregation of Europe and the increased power of grass-roots protest initiatives (such as Antigold in Greece), has resulted in mining companies joining a long list of industries effected by the 'auto-protest' reaction in face of development, regardless of potential regional and national benefits, there is a pre-existing lack of trust in corporate and government powers to protect community interests. The poor management of existing licences is thus becoming a significant danger to future operations and the wider industry. Here we report on the Rosia Montana dispute (Romania) and the ongoing Skouries conflict (Greece). We then discuss how the European mining industry may need to significantly adapt its exploration and community engagement strategies to avoid future conflicts and, present a recent example of how effective suitably organised community engagement projects can be for local mining initiatives from Southern Portugal.

  14. Oil Industry, Solar Energy Industry, and Mining Occupations. Curriculum for Petroleum, Mining and Solar Energy Secretaries. July 1, 1977-June 30, 1978.

    Science.gov (United States)

    Martinez, Gloria E.

    This document is a packet of instructional materials for training secretaries and clerks for the petroleum, mining, and solar energy fields. Developed by Eastern New Mexico University and the New Mexico State Department of Vocational Education, and aimed at New Mexico industry, the curriculum is divided into three units of petroleum, mining, and…

  15. Proceedings of the 11. annual mining industry learning seminar : 2006 equipment evolutions

    Energy Technology Data Exchange (ETDEWEB)

    Joseph, T. [Alberta Univ., Edmonton, AB (Canada). School of Mining and Petroleum Engineering] (comp.)

    2006-07-01

    This seminar provided a forum for mine engineers, geologists, operators, vendors and academics to discuss various topics on equipment evolution that address mining industry concerns. Participants included those who are involved in mine planning, equipment selection, operations and maintenance. The presentations identified possible solutions to ongoing issues and alternative technologies emerging in the mining industry. Operators and original equipment manufacturers shared their innovations in novel developments and presented solutions to issues relevant to mining processes including truck and shovel technology issues such as tires, lube and fuel emissions. The seminar featured 17 presentations, of which 5 have been catalogued separately for inclusion in this database. tabs., figs.

  16. Problems of accounting, cost concerns and economic analysis in the mining enrichment industry

    Energy Technology Data Exchange (ETDEWEB)

    Slabinskiy, V T

    1980-01-01

    Mining enrichment enterprises of the ferrous and nonferrous metallurgy, coal and chemical industry have much in common in the area of technology of production, technical base, organization of labor and production. This in turn presupposes the possible development of a common procedure of accounting of expenditures for production, calculation of net cost of output and analysis of production-economic activity of enterprises. Based on scientific research and generalization of advanced experience of practical workers, means of improvement of economic operation in mining enrichment enterprises are outlined according to increasing demands of production control. An outline of analytic accounting of expenditures which provides for multitarget use of information has been developed: for organization of operational control of the formulation of net cost of output, determination of the results of self support activities of structural subdivisions of an enterprise, computation of the efficiency of scientific and technical progress. Experience of use of economic and mathematical methods in computers for this purpose is discussed.

  17. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    Energy Technology Data Exchange (ETDEWEB)

    Mike L. Fulcher; Kenneth L. Knittel

    2004-06-08

    The work performed on this program was to develop wear resistant, tough FM composite materials with efforts focused on WC-Co based FM systems. The materials were developed for use in mining industry wear applications. Components of interest were drill bit inserts for drilling blast holes. Other component applications investigated included wear plates for a variety of equipment such as pit shovels, wear surfaces for conveyors, milling media for ball milling operations, hydrocyclone cones, grader blades and dozer teeth. Cross-cutting technologies investigated included hot metal extrusion dies, drill bits for circuit board fabrication, cutting tools for cast iron and aluminum machining. An important part of the work was identification of the standard materials used in drilling applications. A materials trade study to determine those metals and ceramics used for mining applications provided guidance for the most important materials to be investigated. WC-Co and diamond combinations were shown to have the most desirable properties. Other considerations such as fabrication technique and the ability to consolidate shifted the focus away from diamond materials and toward WC-Co. Cooperating partners such as Kennametal and Kyocera assisted with supplies, evaluations of material systems, fabricated parts and suggestions for cross-cutting technology applications for FM architectures. Kennametal provided the raw materials (WC-Co and Al-TiCN powders) for the extent of the material evaluations. Kyocera shared their research into various FM systems and provided laboratory testing of fabricated materials. Field testing provided by partners Superior Rock Bit and Brady Mining and Construction provided insight into the performance of the fabricated materials under actual operational conditions. Additional field testing of cross-cutting technology, the extrusion of hot metals, at Extruded Metals showed the potential for additional market development.

  18. Mortality experience among Minnesota taconite mining industry workers.

    Science.gov (United States)

    Allen, Elizabeth M; Alexander, Bruce H; MacLehose, Richard F; Ramachandran, Gurumurthy; Mandel, Jeffrey H

    2014-11-01

    To evaluate the mortality experience of Minnesota taconite mining industry workers. Mortality was evaluated between 1960 and 2010 in a cohort of Minnesota taconite mining workers employed by any of the seven companies in operation in 1983. Standardised mortality ratios (SMR) were estimated by comparing observed deaths in the cohort with expected frequencies in the Minnesota population. Standardised rate ratios (SRR) were estimated using an internal analysis to compare mortality by employment duration. The cohort included 31,067 workers with at least 1 year of documented employment. Among those, there were 9094 deaths, of which 949 were from lung cancer, and 30 from mesothelioma. Mortality from all causes was greater than expected in the Minnesota population (SMR=1.04, 95% CI 1.02 to 1.04). Mortality from lung cancer and mesothelioma was higher than expected with SMRs of 1.16 for lung cancer (95% CI 1.09 to 1.23) and 2.77 for mesothelioma (95% CI 1.87 to 3.96). Other elevated SMRs included those for cardiovascular disease (SMR=1.10, 95% CI 1.06 to 1.14), specifically for hypertensive heart disease (SMR=1.81, 95% CI 1.39 to 2.33) and ischemic heart disease (SMR=1.11, 95% CI 1.07 to 1.16). Results of the SRR analysis did not show variation in risk by duration of employment. This study provides evidence that taconite workers may be at increased risk for mortality from lung cancer, mesothelioma, and some cardiovascular disease. Occupational exposures during taconite mining operations may be associated with these increased risks, but non-occupational exposures may also be important contributors. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  19. Applying data mining techniques to explore factors contributing to occupational injuries in Taiwan's construction industry.

    Science.gov (United States)

    Cheng, Ching-Wu; Leu, Sou-Sen; Cheng, Ying-Mei; Wu, Tsung-Chih; Lin, Chen-Chung

    2012-09-01

    Construction accident research involves the systematic sorting, classification, and encoding of comprehensive databases of injuries and fatalities. The present study explores the causes and distribution of occupational accidents in the Taiwan construction industry by analyzing such a database using the data mining method known as classification and regression tree (CART). Utilizing a database of 1542 accident cases during the period 2000-2009, the study seeks to establish potential cause-and-effect relationships regarding serious occupational accidents in the industry. The results of this study show that the occurrence rules for falls and collapses in both public and private project construction industries serve as key factors to predict the occurrence of occupational injuries. The results of the study provide a framework for improving the safety practices and training programs that are essential to protecting construction workers from occasional or unexpected accidents. Copyright © 2011 Elsevier Ltd. All rights reserved.

  20. Report on observations and suggestions arising out of a visit to the gold mining industry in South Africa

    CSIR Research Space (South Africa)

    Reed, JJ

    1968-02-01

    Full Text Available Following a visit to the South African mining industry and the Chambers Research Organization, the author has presented a number of observations on various aspects of mining and mining research in the Republic. These observations relate generally...

  1. A Long-Term Mathematical Model for Mining Industries

    International Nuclear Information System (INIS)

    Achdou, Yves; Giraud, Pierre-Noel; Lasry, Jean-Michel; Lions, Pierre-Louis

    2016-01-01

    A parcimonious long term model is proposed for a mining industry. Knowing the dynamics of the global reserve, the strategy of each production unit consists of an optimal control problem with two controls, first the flux invested into prospection and the building of new extraction facilities, second the production rate. In turn, the dynamics of the global reserve depends on the individual strategies of the producers, so the models leads to an equilibrium, which is described by low dimensional systems of partial differential equations. The dimensionality depends on the number of technologies that a mining producer can choose. In some cases, the systems may be reduced to a Hamilton–Jacobi equation which is degenerate at the boundary and whose right hand side may blow up at the boundary. A mathematical analysis is supplied. Then numerical simulations for models with one or two technologies are described. In particular, a numerical calibration of the model in order to fit the historical data is carried out.

  2. A Long-Term Mathematical Model for Mining Industries

    Energy Technology Data Exchange (ETDEWEB)

    Achdou, Yves, E-mail: achdou@ljll.univ-paris-diderot.fr [Univ. Paris Diderot, Sorbonne Paris Cité, Laboratoire Jacques-Louis Lions, UMR 7598, UPMC, CNRS (France); Giraud, Pierre-Noel [CERNA, Mines ParisTech (France); Lasry, Jean-Michel [Univ. Paris Dauphine (France); Lions, Pierre-Louis [Collège de France (France)

    2016-12-15

    A parcimonious long term model is proposed for a mining industry. Knowing the dynamics of the global reserve, the strategy of each production unit consists of an optimal control problem with two controls, first the flux invested into prospection and the building of new extraction facilities, second the production rate. In turn, the dynamics of the global reserve depends on the individual strategies of the producers, so the models leads to an equilibrium, which is described by low dimensional systems of partial differential equations. The dimensionality depends on the number of technologies that a mining producer can choose. In some cases, the systems may be reduced to a Hamilton–Jacobi equation which is degenerate at the boundary and whose right hand side may blow up at the boundary. A mathematical analysis is supplied. Then numerical simulations for models with one or two technologies are described. In particular, a numerical calibration of the model in order to fit the historical data is carried out.

  3. Work-home interaction of employees in the mining industry

    Directory of Open Access Journals (Sweden)

    Karina Mostert

    2011-08-01

    Full Text Available This study aimed to test the construct validity, factorial invariance and reliability of the Survey Work-Home Interaction-NijmeGen (SWING and to explore whether and how the work-home interaction of various socio-demographic groups differ. Random samples (n = 320 were taken of employees in the mining industry. The confirmatory factor analysis results supported the proposed four-factor structure measuring negative/positive work-home interference and negative/positive home-work interference. The multi-group invariance analyses’ results for two language and ethnic groups also supported the factorial invariance of the SWING. All the scales were found to be reliable. Statistically significant differences in work-home interaction were found, based on age, ethnicity, gender, education, marital status, parental status, language, flexibility at work and individuals who had a partner with a paid job.

  4. Occupational control of the uranium mine industrial facility in Brazil

    International Nuclear Information System (INIS)

    Neto, C.A.; Figueiredo, N.; Py, J.; Azevedo, D. de; Torrico, J.M.

    1996-01-01

    This Occupational Radiation Protection Plan is applied to uranium ore mining and milling, for uranium concentrate production in form of ammonium diuranate (DUA), in 'Complexo Minero-industrial do Planalto de Pocos de Caldas' - CIPC, in 'Caldas', sited in the southwest of Minas Gerais State. The aims of this program are: to estimate the exposure doses of workers by applying dose calculation models; to control the workplace conditions based on monitoring results, variation studies, and to minimize the radiological risks, with available radiation protection resources optimization. The utilized techniques are: talks, area and individual monitoring, individual protection clothes and equipment, use and application of proper conducts in the workplace, according to the radiation protection norms. (authors)

  5. Applications of radio frequency identification systems in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Hind, D J [Davis Derby Ltd., Derby (United Kingdom)

    1994-01-01

    Radio Frequency Identification Systems (RFID) are one of the automatic data capture technologies taking over from bar codes and magnetic swipe cards in many applications involving automatic hands free operation in arduous environments. RFID systems are based on the use of miniature radio transponders carrying encoded electronic data that is used to uniquely identify the identity of transponders. The paper reviews the types of system available and compares the various techniques involved in the different systems. The various types of transponder are described including the latest state of the art passive read/write high performance types. The problems involved in designing and certifying a system for use in hazardous areas are described, with particular reference to the problems of inadvertent detonator ignition by radio systems. Applications of RFID systems in the mining industry are described, covering applications both on the surface and underground. 1 ref., 10 figs.

  6. The Atomic Energy Control Board and the uranium mining industry

    International Nuclear Information System (INIS)

    Duncan, R.M.

    The Atomic Energy Control Board controls prescribed substances and nuclear facilities through a licensing system. It is only recently that this system has been applied to the uranium industry. There are four stages in the licensing procedure before a Mine-Mill Facility Operating Licence is issued: exploration requires an underground exploration permit; site approval is needed before the start of the development stage; development approval is required before the construction of the mill and waste management facilities and depends on the information in a preliminary safety report; the granting of a final operating licence occurs after the Board is satisfied with the final safety report, operating policies and principles, tailings management, and decommissioning plans. The Board has resource management policies designed to ensure that uranium reserves are available to meet Canada's needs. The administration of safeguards is also the Board's responsibility. (LL)

  7. Solid-liquid separation in the mining industry

    CERN Document Server

    Concha A , Fernando

    2014-01-01

    This book covers virtually all of the engineering science and technological aspects of separating water from particulate solids in the mining industry. It starts with an introduction to the field of mineral processing and the importance of water in mineral concentrators. The consumption of water in the various stages of concentration is discussed, as is the necessity of recovering the majority of that water for recycling. The book presents the fundamentals under which processes of solid-liquid separation are studied, approaching mixtures of discrete finely divided solid particles in water as a basis for dealing with sedimentation in particulate systems. Suspensions, treated as continuous media, provide the basis of sedimentation, flows through porous media and filtration. The book also considers particle aggregations, and thickening is analyzed in depth. Lastly, two chapters cover the fundamentals and application of rheology and the transport of suspensions.  This work is suitable for researchers and profess...

  8. Country reports (Part 2). Country report on mining industry in Sabah Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Nordin, M S. B.

    1988-06-25

    In Sabah district of Malaysia, only one mining industry exists which is a joint venture between Japan and Malaysia, producing copper by consuming 500,000 tons/year of ore which contains 0.57% of copper and 0.65 gm/ton of gold. Regarding the mining industry, outline of its organization, process, equipments, and capacity are summarized. In addition, main clauses of safety regulation and its practises are explained. Concerning Burma, Governmental organization is shown as a graph and mining industries are divided into seven categories. Products, mining methods and capacities are explained by tables. (6 figs, 3 tables)

  9. Architectural Prototyping in Industrial Practice

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2008-01-01

    Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system......, in addressing issues regarding quality attributes, in addressing architectural risks, and in addressing the problem of knowledge transfer and conformance. Little work has been reported so far on the actual industrial use of architectural prototyping. In this paper, we report from an ethnographical study...... and focus group involving architects from four companies in which we have focused on architectural prototypes. Our findings conclude that architectural prototypes play an important role in resolving problems experimentally, but less so in exploring alternative solutions. Furthermore, architectural...

  10. Assessing Water Risks in the Mining Industry using Life Cycle Assessment Based Approaches

    OpenAIRE

    STEPHEN ALAN NORTHEY

    2018-01-01

    Recent advances life cycle assessment methodology provide an opportunity to gain a more holistic understanding of how the mining industry interacts with water resources. A detailed review of assessment methodology and water management in the mining industry was undertaken to identify research needs. Global datasets of water use statistics for mining operations were also developed, and an exhaustive analysis of how global mineral resources and production are spatially distributed across local ...

  11. Water pollution: its management and control in the South African gold mining industry

    International Nuclear Information System (INIS)

    Pulles, W.

    1992-01-01

    The South African mining industry is subjected to pressure from the authorities, the media and the public regarding the impact of mining operations on the water environment. In order to respond to these developments the mining industry needs to have a good understanding of water quality management issues which apply to its operations. Important issues in this regard are discussed. 40 refs., 10 tabs., 2 figs

  12. Physiological strain in the Hungarian mining industry: The impact of physical and psychological factors

    OpenAIRE

    József Varga; Imre Nagy; László Szirtes; János Pórszász

    2016-01-01

    Objectives: The objectives of these investigations completed on workplaces in the Hungarian mining industry were to characterize the physiological strain of workers by means of work pulse and to examine the effects of work-related psychological factors. Material and Methods: Continuous heart rate (HR) recording was completed on 71 miners over a total of 794 shifts between 1987 and 1992 in mining plants of the Hungarian mining industry using a 6-channel recorder – Bioport (ZAK, Germany). The w...

  13. Green Remediation Best Management Practices: Mining Sites

    Science.gov (United States)

    This fact sheet describes best management practices (BMPs) that can be used to reduce the environmental footprint of cleanup activities associated with common project components, cleanup phases, and implementation of remediation technologies.

  14. Industrial environmental practices in Polish Firms

    DEFF Research Database (Denmark)

    Kræmer, Trine Pipi

    , and environment. The five case firms all had a Communist past. The firms represent three different industrial sectors; i.e. textile, energy, and publishing and printing industries. Furthermore, the firms are both private and state owned as well as in the process of privatisation.......The study investigates how discursive developments in Poland interact with industrial environmental practices in five production firms. The analysis of the discursive development covers the period from the end of World War I to the turn of the century. The areas in focus are identity, industry...

  15. Development trends in the Lusatian brown coal mining industry

    International Nuclear Information System (INIS)

    Schwirten, D.

    1994-01-01

    Lusatia has lived on and with brown coal for over 200 years. Brown coal changed what was once a region in which forestry and agriculture predominated into an industrial region. Thanks to its good combustion properties and high energy yield brown coal very soon became known and popular. It was always the driving force for a rapid development which resulted in an economically sound and technically up-to-date industry in Lusatia. This powerful status of brown coal was however soon exploited for aims which were bound to lead to the downfall of two social structures (during the years from 1933 to 1990) by reason of a regime of unconditional autarchy. The economic and technical development thus initiated certainly brought many advantages, but it also had serious diadvantages. Constant increases in production, as a result of which planned rated outputs were intentionally disregarded, were the rule because production targets had to be met or exceeded. Economic inefficiency led to a scarcity of labour and a shortage of finances. Environmental aims had no priority since production was the absolute, primary objective. Consequently, this regime of economic autarchy ended in an one-way street as far as industry was concerned, a situation which was accompanied by an unexampled destruction of the natural basic living conditions and direct, threatening health hazards to man and nature. The year 1990 saw the beginning of the transition from planned controlled economy to free market economy. The reorganization of the former large combines as corporations was not however merely a formal change, but internally also represented a transformation. The brown coal mining industry manifested its new intention and determination to be economically competitive and unsubsidized in future, to operate in such a way as to be compatible with the environment and to exploit reserves carefully, as well as to render its activities socially compatible. (orig.) [de

  16. Corporate Governance and Environmental Disclosure in the Indonesian Mining Industry

    Directory of Open Access Journals (Sweden)

    Terri Trireksani

    2016-04-01

    Full Text Available Sustainability and corporate governance issues are now considered to be important and integral aspects of company performance. Both have established themselves as well-studied topics in the organisational and accountability areas. While there has been a growing interest to study the relationship between these two areas, research publication in this topic is still mainly focused on the Western societies. This study focuses on the corporate governance and sustainability disclosure practices in one of the emerging economies, Indonesia, and assesses the relationships between corporate governance variables and the extent of environmental disclosures made by the mining companies listed in the Indonesia Stock Exchange (IDX in their annual reports. The main findings of this study show that the extent of environmental disclosure made by these companies was moderate, and that there is a significant positive relationship between the size of board of directors and the extent of environmental disclosure.

  17. Industrial Radiography: Principle and Practical

    International Nuclear Information System (INIS)

    Abdul Nassir Ibrahim; Azali Muhammad; Ab. Razak Hamzah; Abd. Aziz Mohamed; Mohamad Pauzi Ismail

    2008-01-01

    The successful and effectiveness of radiography method as a tool to increase quality level and safety of the engineering system and processing plants depend with the level of radiographer knowledge as service provider and also as supervisor. This book was published as effort several local experts to give their knowledge, theory and practical related to radiography technique to the involved public directly or indirectly. This book started with basic physic knowledge that becomes a root to radiography technology. Then, followed by discussion on tools and device that used in radiography work including x-ray machine, gamma projector, film, dark room, and others. Each aspect of radiograph quality also mentioned here to guide the reader on how to produce good radiograph that filled the specification wanted. The good radiograph does not mean anything if it failed to be interpreted correctly. Because of that, this book also explain how to choose good radiograph that qualified to be interpreted and after that how interpretation and evaluation process of object quality inspected was implemented based on image digestion that showed in radiograph. Several code and standard that usually applied in this country also will be referred as well for this work.

  18. Natural radioactivity in mining and hydrocarbon extraction industry. Vol. 1

    Energy Technology Data Exchange (ETDEWEB)

    Testa, C; Desideri, D; Meli, M A; Roselli, C [General Chemistry Institute, Urbino University, 61029 Urbino, (Italy)

    1996-03-01

    Water and soil natural radioactivity is a well known phenomenon which can produced by variable concentrations of uranium and thorium series radionuclides. Generally, the relevant radiological hazard is not important; however, some radiation protection problems can occur in particular industrial processes involving the treatment of large quantities of materials. In this case a high concentration of radioactive substance (NORM: nationally occurring radioactive materials) can be found at special points of the plant, in the manufacture by-products and in the waters. Sometimes the national radioactivity concentration can be so high to raise radiation protection problems which can be assimilated in a sense to the ones faced in the presence, handling, and disposal of non-sealed radioactive sources. In this paper the following mining and hydrocarbon extraction plants were particularly taken into account: (a) industries using zircon sands to produce refractory and ceramic materials; (b) phosphorites manufacture to prepare phosphoric acids, plasters and fertilizers (c) hydrocarbon extraction and treatment processes where formations of low specific activity (L.S.A.) scales and sludges are produced. The relevant results and the possible radiation protection risks for the professional exposed staff will be reported. A special emphasis will be given to some african phosphorites (boucraa, togo, morocco), and L.S.A. scales (tunisia, congo, Egypt). 4 figs., 5 tabs.

  19. Natural radioactivity in mining and hydrocarbon extraction industry. Vol. 1

    International Nuclear Information System (INIS)

    Testa, C.; Desideri, D.; Meli, M.A.; Roselli, C.

    1996-01-01

    Water and soil natural radioactivity is a well known phenomenon which can produced by variable concentrations of uranium and thorium series radionuclides. Generally, the relevant radiological hazard is not important; however, some radiation protection problems can occur in particular industrial processes involving the treatment of large quantities of materials. In this case a high concentration of radioactive substance (NORM: nationally occurring radioactive materials) can be found at special points of the plant, in the manufacture by-products and in the waters. Sometimes the national radioactivity concentration can be so high to raise radiation protection problems which can be assimilated in a sense to the ones faced in the presence, handling, and disposal of non-sealed radioactive sources. In this paper the following mining and hydrocarbon extraction plants were particularly taken into account: a) industries using zircon sands to produce refractory and ceramic materials; b) phosphorites manufacture to prepare phosphoric acids, plasters and fertilizers c) hydrocarbon extraction and treatment processes where formations of low specific activity (L.S.A.) scales and sludges are produced. The relevant results and the possible radiation protection risks for the professional exposed staff will be reported. A special emphasis will be given to some african phosphorites (boucraa, togo, morocco), and L.S.A. scales (tunisia, congo, Egypt). 4 figs., 5 tabs

  20. The industrial panopticon: mining and the medical construction of migrant African labour in South Africa, 1900-1950.

    Science.gov (United States)

    Butchart, A

    1996-01-01

    Derived from a marxist/liberal humanist view of power, conventional critiques of the South African gold mining industry's medical apparatus see only its power to repress and negate the true bodily attributes and authentic person of the African mine worker. In so doing, they ignore the productive capacity of medical practice as a manifestation of what Foucault termed "disciplinary" power, by which the human body is manufactured and made manageable as an object of medical knowledge and industrial utilization. Accordingly, this paper offers just such a Foucaultian reading of South African mining medicine to demonstrate how it has operated to fabricate the bodies of African miners as visible objects possessed of distinct attributes that provoked particular strategies for their surveillance in health and disease.

  1. Acclimatization Services to the Mining Industry: Statistics for 1990

    CSIR Research Space (South Africa)

    Hitge, JJ

    1991-10-01

    Full Text Available This report is designed to convey information to mine management, environmental engineers, training personnel and acclimatization supervisors that will allow an appraisal of their mine's position with regard to heat acclimatization of workers...

  2. Blasting Standards for the Ghanaian Mining Industry | Amegbey ...

    African Journals Online (AJOL)

    Ghana is a well known mining nation and hard rock mining has been going on since the 10th century. Mining companies in Ghana are well aware of the regulatory requirements to carry out blasting activities such that neighbouring communities are protected from excessive impact as a result of blast vibrations amongst other ...

  3. Ecological restoration of mineland with particular reference to the metalliferous mine wasteland in China: A review of research and practice.

    Science.gov (United States)

    Li, M S

    2006-03-15

    Despite a principal contributor to the rapid economic growth, the mining industry in China produced a large amount of wasteland and caused water pollution and soil erosion as well as other environmental damages. In 2002, this industry generated 265.4 Mt tailings, 130.4 Mt gangue and 107.8 Mt smelting slags. The degraded land associated with mining is estimated to be 3.2 Mha by the end of 2004, deteriorating the land shortage of China. Restoration of mine wasteland began in late 1970s but the restoration process was sluggish. The overall restoration rate (the ratio of reclaimed land area to the total degraded land area) of mine wasteland was some 10-12% with a higher rate for coal mine spoils but a lower rate for metal-mined derelict land. From 1994 to 2004, 149 research papers were published about the restoration of China's mining wasteland, of which 70 were on metal-mined land and 61 on the non-metal-mined land. Although 37 institutions in China were involved in the restoration research, only a few remained active and productive. Metal-mined derelict land is often more metal toxic and deficient of macronutrients and is tougher for revegetation. Many substrate amelioration techniques were proposed and tolerant plant species were tested for use of reclamation of the metal-mined tailings. Five hyperaccumulator species have been reported in China for the potential use in phytoremediation. However, these accomplishments were all at laboratory or small-scale field demonstration stage and still far from the practical use in reality. To accelerate the restoration and utilization of mine wasteland, several recommendations are put forward in this review. Above these suggestions, the commitment and efficiency of the government at all levels are vital.

  4. International Workshop on Industry Practices for Forecasting

    CERN Document Server

    Poggi, Jean-Michel; Brossat, Xavier

    2015-01-01

    The chapters in this volume stress the need for advances in theoretical understanding to go hand-in-hand with the widespread practical application of forecasting in industry. Forecasting and time series prediction have enjoyed considerable attention over the last few decades, fostered by impressive advances in observational capabilities and measurement procedures. On June 5-7, 2013, an international Workshop on Industry Practices for FORecasting was held in Paris, France, organized and supported by the OSIRIS Department of Electricité de France Research and Development Division. In keeping with tradition, both theoretical statistical results and practical contributions on this active field of statistical research and on forecasting issues in a rapidly evolving industrial environment are presented. The volume reflects the broad spectrum of the conference, including 16 articles contributed by specialists in various areas. The material compiled is broad in scope and ranges from new findings on forecasting in in...

  5. Exploring the challenges associated with the greening of supply chains in the South African manganese and phosphate mining industry

    Directory of Open Access Journals (Sweden)

    R.I. David Pooe

    2014-11-01

    Full Text Available As with most mining activities, the mining of manganese and phosphate has serious consequences for the environment. Despite a largely adequate and progressive framework for environmental governance developed since 1994, few mines have integrated systems into their supply chain processes to minimise environmental risks and ensure the achievement of acceptable standards. Indeed, few mines have been able to implement green supply chain management (GrSCM. The purpose of this article was to explore challenges related to the implementation of GrSCM and to provide insight into how GrSCM can be implemented in the South African manganese and phosphate industry. This article reported findings of a qualitative study involving interviews with 12 participants from the manganese and phosphate industry in South Africa. Purposive sampling techniques were used. Emerging from the study were six themes, all of which were identified as key challenges in the implementation of GrSCM in the manganese and phosphate mining industry. From the findings, these challenges include the operationalisation of environmental issues, lack of collaboration and knowledge sharing, proper application of monitoring and control systems,lack of clear policy and legislative direction, the cost of implementing GrSCM practices, and the need for strong leadership and management of change. On the basis of the literature reviewed and empirical findings, conclusions were drawn and policy and management recommendations were accordingly made.

  6. Job demands, job resources, burnout and engagement of employees in the mining industry in South Africa / Marthie van der Walt

    OpenAIRE

    Van der Walt, Martha Johanna Rieker

    2008-01-01

    The mining industry has been the bedrock of South African economy for more than a century, making an important contribution to employment opportunities, the gross domestic product and export earnings in the South African economy. Globally the mining industry is faced with a shortage of qualified talent to meet its production needs. Every year there are more people leaving than entering the mining industry to pursue job and career opportunities. The mining industry has to focus a lot on safety...

  7. Review of Wearable Device Technology and Its Applications to the Mining Industry

    Directory of Open Access Journals (Sweden)

    Mokhinabonu Mardonova

    2018-03-01

    Full Text Available This paper reviews current trends in wearable device technology, and provides an overview of its prevalent and potential deployments in the mining industry. This review includes the classification of wearable devices with some examples of their utilization in various industrial fields as well as the features of sensors used in wearable devices. Existing applications of wearable device technology to the mining industry are reviewed. In addition, a wearable safety management system for miners and other possible applications are proposed. The findings of this review show that by introducing wearable device technology to mining sites, the safety of mining operations can be enhanced. Therefore, wearable devices should be further used in the mining industry.

  8. Financial planning and analysis techniques of mining firms: a note on Canadian practice

    Energy Technology Data Exchange (ETDEWEB)

    Blanco, H.; Zanibbi, L.R. (Laurentian University, Sudbury, ON (Canada). School of Commerce and Administration)

    1992-06-01

    This paper reports on the results of a survey of the financial planning and analysis techniques in use in the mining industry in Canada. The study was undertaken to determine the current status of these practices within mining firms in Canada and to investigate the extent to which the techniques are grouped together within individual firms. In addition, tests were performed on the relationship between these groups of techniques and both organizational size and price volatility of end product. The results show that a few techniques are widely utilized in this industry but that the techniques used most frequently are not as sophisticated as reported in previous, more broadly based surveys. The results also show that firms tend to use 'bundles' of techniques and that the relative use of some of these groups of techniques is weakly associated with both organizational size and type of end product. 19 refs., 7 tabs.

  9. Number of conveyor belts optimization regarding to its type and logistical parameters in mining industry

    Directory of Open Access Journals (Sweden)

    Dušan Malindžák

    2008-12-01

    Full Text Available Material transportation by belt conveyers is widely used in many industrial branches including mining plants. Belt conveyingdevelopment during the last year was oriented mainly on construction of belts. The consequence of this is the improvement of itsmanufacture qualities bringing down the costs for their exchange and maintenance.Despite the fact that there are some theoreticalcalculations based on a standards it is common in the industry that the belt is not properly selected or it is overdesigned or number of itstypes is too large what can lead to increased costs for its storage. The paper describes the optimization of number of belt types in miningcompany SIDERIT, s. r. o. Nižná Slaná by the method of modernization and unification of belts under practical skills and projectingbased on theoretical calculations.

  10. Technical writing practically unified through industry

    Science.gov (United States)

    Houston, L. S.

    1981-01-01

    General background details in the development of a university level technical writing program, based upon the writing tasks of the student's occupations, are summarized. Objectives and methods for unifying the courses of study with the needs of industry are discussed. Four academic course divisions, Industries Technologies, in which preparation and training are offered are: Animal, Horticulture, Agriculture, and Agricultural Business. Occupational competence is cited as the main goal for these programs in which technical writing is to be practically unified through industry. Course descriptions are also provided.

  11. Charter of good practices in industrial radiography

    International Nuclear Information System (INIS)

    2010-01-01

    This document describes good practices in the field of industrial radiography. After having presented the main prevention and radiation protection principles, the actors inside and outside of the company, and actors intervening during an operation subcontracting in industrial radiography, this report analyzes the activity: prerequisites for work preparation, prevention coordination, work preparation, transportation, work achievement, return on experience. It addresses personnel training and information, and the dosimetric and medical monitoring of technicians in industrial radiography. Some aspects are addressed in appendix: principles (justification, optimization, and limitation), regulations, intervention form, exposure form, and so on

  12. [Pollution-ecological problems of old industrial and mining areas and future research prospects].

    Science.gov (United States)

    Zhou, Qixing

    2005-06-01

    Environmental pollution and its solicitation in ecological problems of old industrial and mining areas have become a worldwide technological puzzle restricting sustainable economic and social development. But, the definition and category of old industrial and mining areas is still disputed as an important concept. In this paper, the concept of old industrial and mining area was discussed in theory, and, proceeded with analyzing the complexity of current situation and environmental pollution problems of old industrial and mining areas in China, more keystone attention was paid to the secondary pollution problems from old industrial and mining areas as an important frontier of science. On the basis of expounding the complexity and characters of environmental pollution in old industrial and mining areas, it was suggested that as two key scientific problems in environmental sciences and ecology, the formation mechanisms and control technology of secondary pollution in old industrial and mining areas and the responses of new-type diseases to environmental pollution based on molecular ecotoxicology should be systematically studied on the national scale, and be an important component of environmental protection strategy in China in the future.

  13. Machine-related injuries in the US mining industry and priorities for safety research.

    Science.gov (United States)

    Ruff, Todd; Coleman, Patrick; Martini, Laura

    2011-03-01

    Researchers at the National Institute for Occupational Safety and Health studied mining accidents that involved a worker entangled in, struck by, or in contact with machinery or equipment in motion. The motivation for this study came from the large number of severe accidents, i.e. accidents resulting in a fatality or permanent disability, that are occurring despite available interventions. Accident descriptions were taken from an accident database maintained by the United States Department of Labor, Mine Safety and Health Administration, and 562 accidents that occurred during 2000-2007 fit the search criteria. Machine-related accidents accounted for 41% of all severe accidents in the mining industry during this period. Machinery most often involved in these accidents included conveyors, rock bolting machines, milling machines and haulage equipment such as trucks and loaders. The most common activities associated with these accidents were operation of the machine and maintenance and repair. The current methods to safeguard workers near machinery include mechanical guarding around moving components, lockout/tagout of machine power during maintenance and backup alarms for mobile equipment. To decrease accidents further, researchers recommend additional efforts in the development of new control technologies, training materials and dissemination of information on best practices.

  14. Occupational respiratory diseases in the South African mining industry.

    Science.gov (United States)

    Nelson, Gill

    2013-01-24

    Crystalline silica and asbestos are common minerals that occur throughout South Africa, exposure to either causes respiratory disease. Most studies on silicosis in South Africa have been cross-sectional and long-term trends have not been reported. Although much research has been conducted on the health effects of silica dust and asbestos fibre in the gold-mining and asbestos-mining sectors, little is known about their health effects in other mining sectors. The aims of this thesis were to describe silicosis trends in gold miners over three decades, and to explore the potential for diamond mine workers to develop asbestos-related diseases and platinum mine workers to develop silicosis. Mine workers for the three sub-studies were identified from a mine worker autopsy database at the National Institute for Occupational Health. From 1975 to 2007, the proportions of white and black gold mine workers with silicosis increased from 18 to 22% and from 3 to 32% respectively. Cases of diamond and platinum mine workers with asbestos-related diseases and silicosis, respectively, were also identified. The trends in silicosis in gold miners at autopsy clearly demonstrate the failure of the gold mines to adequately control dust and prevent occupational respiratory disease. The two case series of diamond and platinum mine workers contribute to the evidence for the risk of asbestos-related diseases in diamond mine workers and silicosis in platinum mine workers, respectively. The absence of reliable environmental dust measurements and incomplete work history records impedes occupational health research in South Africa because it is difficult to identify and/or validate sources of dust exposure that may be associated with occupational respiratory disease.

  15. Occupational respiratory diseases in the South African mining industry

    Directory of Open Access Journals (Sweden)

    Gill Nelson

    2013-01-01

    Full Text Available Background: Crystalline silica and asbestos are common minerals that occur throughout South Africa, exposure to either causes respiratory disease. Most studies on silicosis in South Africa have been cross-sectional and long-term trends have not been reported. Although much research has been conducted on the health effects of silica dust and asbestos fibre in the gold-mining and asbestos-mining sectors, little is known about their health effects in other mining sectors. Objective: The aims of this thesis were to describe silicosis trends in gold miners over three decades, and to explore the potential for diamond mine workers to develop asbestos-related diseases and platinum mine workers to develop silicosis. Methods: Mine workers for the three sub-studies were identified from a mine worker autopsy database at the National Institute for Occupational Health. Results: From 1975 to 2007, the proportions of white and black gold mine workers with silicosis increased from 18 to 22% and from 3 to 32% respectively. Cases of diamond and platinum mine workers with asbestos-related diseases and silicosis, respectively, were also identified. Conclusion: The trends in silicosis in gold miners at autopsy clearly demonstrate the failure of the gold mines to adequately control dust and prevent occupational respiratory disease. The two case series of diamond and platinum mine workers contribute to the evidence for the risk of asbestos-related diseases in diamond mine workers and silicosis in platinum mine workers, respectively. The absence of reliable environmental dust measurements and incomplete work history records impedes occupational health research in South Africa because it is difficult to identify and/or validate sources of dust exposure that may be associated with occupational respiratory disease.

  16. Occupational respiratory diseases in the South African mining industry

    OpenAIRE

    Nelson, Gill

    2013-01-01

    Background: Crystalline silica and asbestos are common minerals that occur throughout South Africa, exposure to either causes respiratory disease. Most studies on silicosis in South Africa have been crosssectional and long-term trends have not been reported. Although much research has been conducted on the health effects of silica dust and asbestos fibre in the gold-mining and asbestos-mining sectors, little is known about their health effects in other mining sectors. Objective: The aims of t...

  17. Data mining for the online retail industry: A case study of RFM model-based customer segmentation using data mining

    OpenAIRE

    Chen, D

    2012-01-01

    Many small online retailers and new entrants to the online retail sector are keen to practice data mining and consumer-centric marketing in their businesses yet technically lack the necessary knowledge and expertise to do so. In this article a case study of using data mining techniques in customer-centric business intelligence for an online retailer is presented. The main purpose of this analysis is to help the business better understand its customers and therefore conduct customer-centric ma...

  18. Interventions of state in favour of mining industry in EU countries

    Energy Technology Data Exchange (ETDEWEB)

    Jaroslav Dvoracek; Vladimir Slivka [VSB-Technical University of Ostrava (Czech Republic)

    2008-03-15

    This contribution is based on a study dealing with the limitation or withdrawal of ownership rights to real estates in favour of the mining industry. All EU countries are included as of the year 2006. The interventions of the state concern ensuring entry to other people's lands to carry out exploration activities and restraining the proprietary rights of landowners in favour of mining, including expropriation. The countries where mining legislation does not cover state interventions are also presented.

  19. Radiation protection in uranium mining and milling industry

    International Nuclear Information System (INIS)

    Raghavayya, M.

    2005-01-01

    The first phase of the Nuclear Fuel Cycle is exploration for uranium and the next is mining and milling of uranium ore. This phase is mostly characterised by low levels of radioactivity and radiation exposure of the workers involved. Yet it is a paradoxical truth that incidence of cancer among the work force, especially miners, due to occupational radiation exposure (from radon and decay products) has been proved only in uranium mines in the entire Nuclear Fuel Cycle. Of course such incidence occurred before the detrimental effect of radiation exposure was realised and understood. Therefore it is important to familiarise oneself with the radiation hazards prevalent in the uranium mining and milling facilities so as to take appropriate remedial measures for the protection of not only the workers but also the public at large. There are both open cast and underground uranium mines around the world. Radiation hazards are considerably less significant in open cast mines than in underground mines unless the ore grade is very high. By default therefore the discussion which ensues relates mainly to radiation hazards in underground uranium mines and associated milling operations. The discussion gives a brief outline of typical uranium mine and mining and milling operations. This is followed by a description of the radiation hazards therein and protection measures that are to be taken to minimise radiation exposure. (author)

  20. On sustainable development of uranium mining industry in China based on the concept of ecological security

    International Nuclear Information System (INIS)

    Wu Shali; Tai Kaixuan

    2011-01-01

    Ecological security is an important issue for sustainable development of mining industry, on which the development of nuclear industry and nuclear power is based. But uranium mining and processing has larger effect on ecological environment which mainly include tailings, waste rock, waste water, and radiation effects. In this paper, the dialectical relationship between ecological security and sustainable relationship is analyzed, the ecological safety concept at home and abroad is compared and the role that ecological safety plays in the sustainable development of uranium mining based on analysis of restricting factors on uranium mining in China from the perspective of ecological security is also probed into. To achieve sustainable development of the uranium mining industry in China, an ecological security concept from four aspects must be established: 1) the concept of ecological security management; 2) the scientific concept of ecological security; 3) the concept of ecological security investment; and 4) the concept of ecological security responsibility. (authors)

  1. Determination of possible radiation hazards associated with tin mining industry in West Malaysia

    International Nuclear Information System (INIS)

    Hu, S.J.

    1979-04-01

    A study was made in Malaysia under an IAEA research contract on the possible radiation hazards associated with tin mining industry in Malaysia. The study comprised of the measurement of external radiation levels in various mines, gamma-ray spectrometric analysis of various samples from mines, and measurements of radon and radon daughters concentrations. For radon daughters modified Tsivoglou and Kusnetz methods were used. The study showed that there is, in general, no radiation hazard associated with the tin mining industry in West Malaysia. However, the only likely source that might pose some external radiation hazard is the amang upgrading plant which invariably concentrates either or both 232 Th and 238 U in the final products of the upgrading process. A quantitative and thorough investigation of radiation levels in the amang upgrading industry is necessary to determine the degree of hazard. No significant radon or radon daughters concentrations were noted in the underground mines

  2. Mining royalties and the implications of the Northern Territory Green Paper for the Australian mining industry

    International Nuclear Information System (INIS)

    Garnaut, R.

    1982-01-01

    The 1981 Green Paper on Mining Royalty Policy for the Northern Territory is a significant landmark in the evolution of fiscal policy in relation to mining in Australia. However, as with mining on Aboriginal land, the Green Paper and the new Royalties Bill have not settled fiscal policy in relation to uranium mining. The Commonwealth still, although presumably temporarily, retains the power to set and to collect royalties on uranium mining. The coincidence that places the most valuable known uranium deposits on Aboriginal land further increases uncertainty about fiscal policy

  3. Coal-Mining Tailings as a Pozzolanic Material in Cements Industry

    Directory of Open Access Journals (Sweden)

    Santiago Yagüe

    2018-01-01

    Full Text Available The generation of enormous volumes of mine-tailing waste is standard practice in the mining industry. Large quantities of these tailings are also sources of kaolinite-rich materials that accumulate in slag heaps, causing significant environmental degradation and visual impacts on the landscape. The consequences of coal refuse dumped in slagheaps calls for the study of eco-innovative solutions and the assessment of waste types. Moreover, the environmental benefits of reusing large amounts of contaminated waste are also evident. Hence, the objective of this investigation is to expand current knowledge of new siliceous-aluminium minerals and their pozzolanic activity. Four raw tailing samples are characterized to determine their chemical (by ICP/MS analysis, morphological (by SEM/EDX analysis, and mineralogical (by XRD analysis compositions prior to their thermal activation that transforms the inert wastes at various temperatures into materials with cementitious properties. The results of XRD analysis following activation confirmed that the kaolinite content is fully transformed into metakaolinite. The coal refuse samples presented sufficiently reliable levels of pozzolanic activity for use as additives in industrial cements.

  4. Code of practice in industrial radiography

    International Nuclear Information System (INIS)

    Karma, S. E. M.

    2010-12-01

    The aim of this research is to developing a draft for a new radiation protection code of practice in industrial radiography without ignoring that one issued in 1998 and meet the current international recommendation. Another aim of this study was to assess the current situation of radiation protection in some of the industrial radiography department in Sudan. To achieve the aims of this study, a draft of a code of practice has been developed which is based on international and local relevant recommendations. The developed code includes the following main issues: regulatory responsibilities, radiation protection program and design of radiation installation. The practical part of this study includes scientific visits to two of industrial radiography departments in Sudan so as to assess the degree of compliance of that department with what state in the developed code. The result of each scientific visits revealed that most of the department do not have an effective radiation protection program and that could lead to exposure workers and public to unnecessary dose. Some recommendations were stated that, if implemented could improve the status of radiation protection in industrial radiography department. (Author)

  5. a study of gold mining industry in ghana

    African Journals Online (AJOL)

    PUBLICATIONS1

    is the case of Ghana. The abstract of the ... and tax waivers for foreign mining companies amount to millions ... it provides a rich re- view of literature where the legal ramifications ..... ciplinary research: gold mining is a double edged sword, and ...

  6. Student Privacy and Educational Data Mining: Perspectives from Industry

    Science.gov (United States)

    Sabourin, Jennifer; Kosturko, Lucy; FitzGerald, Clare; McQuiggan, Scott

    2015-01-01

    While the field of educational data mining (EDM) has generated many innovations for improving educational software and student learning, the mining of student data has recently come under a great deal of scrutiny. Many stakeholder groups, including public officials, media outlets, and parents, have voiced concern over the privacy of student data…

  7. Integrating Industrial Ecology Thinking into the Management of Mining Waste

    Directory of Open Access Journals (Sweden)

    Éléonore Lèbre

    2015-10-01

    Full Text Available Mining legacies are often dominated by large waste facilities and their associated environmental impacts. The most serious environmental problem associated with mine waste is heavy metals and acid leakage through a phenomenon called acid mine drainage (AMD. Interestingly, the toxicity of this leakage is partly due to the presence of valuable metals in the waste stream as a result of a diversity of factors influencing mining operations. A more preventive and recovery-oriented approach to waste management, integrated into mine planning and operations, could be both economically attractive and environmentally beneficial since it would: mitigate environmental impacts related to mine waste disposal (and consequently reduce the remediation costs; and increase the resource recovery at the mine site level. The authors argue that eco-efficiency and resilience (and the resulting increase in a mine’s lifetime are both critical—yet overlooked—characteristics of sustainable mining operations. Based on these arguments, this paper proposes a framework to assist with identification of opportunities for improvement and to measure this improvement in terms of its contribution to a mine’s sustainability performance.

  8. Investigation into slipping and falling accidents and materials handling in the South African mining industry.

    CSIR Research Space (South Africa)

    Schutte, PC

    2003-03-01

    Full Text Available The objective of this study was to analyze information on slipping and falling accidents and materials handling activities in the South African mining industry. Accident data pertaining to slipping, falling and materials handling accidents...

  9. Code of Practice on Radiation Protection in the Mining and Processing of Mineral Sands (1982) (Western Australia)

    International Nuclear Information System (INIS)

    1982-01-01

    This Code establishes radiation safety practices for the mineral sands industry in Western Australia. The Code prescribes, not only for operators and managers of mines and processing plants but for their employees as well, certain duties designed to ensure that radiation exposure is kept as low as reasonably practicable. The Code further provides for the management of wastes, again with a view to keeping contaminant concentrations and dose rates within specified levels. Finally, provision is made for the rehabilitation of those sites in which mining or processing operations have ceased by restoring the areas to designated average radiation levels. (NEA) [fr

  10. Environmental management in the Australian minerals and energy industries: principles and practices

    Energy Technology Data Exchange (ETDEWEB)

    Mulligan, D.R. [ed.] [University of Queensland, St. Lucia, Qld. (Australia). Centre for Mined Land Rehabilitation, Dept. of Agriculture

    1996-12-31

    This is a comprehensive reference text on the principles and practices of environmental management being developed and implemented in Australia`s mining and energy industries. It also present a set of case histories focused on individual minerals (coal, sand, aluminium, iron ore, base metals, uranium, mineral sands, construction materials and petroleum). The 5 of the 20 chapters of particular relevance to the coal industry have been abstracted separately for the IEA Coal Research CD-ROM. 800 refs.

  11. Quantification practices in the nuclear industry

    International Nuclear Information System (INIS)

    1986-01-01

    In this chapter the quantification of risk practices adopted by the nuclear industries in Germany, Britain and France are examined as representative of the practices adopted throughout Europe. From this examination a number of conclusions are drawn about the common features of the practices adopted. In making this survey, the views expressed in the report of the Task Force on Safety Goals/Objectives appointed by the Commission of the European Communities, are taken into account. For each country considered, the legal requirements for presentation of quantified risk assessment as part of the licensing procedure are examined, and the way in which the requirements have been developed for practical application are then examined. (author)

  12. IMPROVING PERFORMANCES BY USING COST CONTROLLING IN THE MINING INDUSTRY ENTITIES

    Directory of Open Access Journals (Sweden)

    SORINEL CĂPUŞNEANU

    2016-06-01

    Full Text Available The aim of this article is to highlight the improving performances of entities from mining industry entities by using cost controlling as an important tool of management accounting, applying the target costing method. The survey is based on questions that led investigation made in the Romanian entities from mining industry and based on data a thorough analysis was done for fulfillment of authors’ purpose. The results obtained by applying the target costing method has allowed a very strict cost control, which ultimately led to increased performances of economic entities from mining industry in Romania. The secondary purpose of this article is to try adjusting the target costing method to the specific of entities in the mining industry. According to studies of specialists this method based on target costing calculation is rather unusual in this sector of mining industry and it relies heavily on the activity-based costing method. The article ends with the authors' conclusions on improving the performances of entities from mining industry based on cost controlling and use of mix information obtained through the applied methods

  13. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    Science.gov (United States)

    Kittipongvises, Suthirat

    2015-12-01

    There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs) emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e) per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM) projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding) generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2) is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR), vertical roller mills (VRM), gravity pre-concentration and microwave heating technologies) that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and practice were

  14. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    Directory of Open Access Journals (Sweden)

    Kittipongvises Suthirat

    2015-12-01

    Full Text Available There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2 is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR, vertical roller mills (VRM, gravity pre-concentration and microwave heating technologies that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and

  15. A new productivity index to measure economic sustainability of the mining industry

    International Nuclear Information System (INIS)

    Rodriguez, Xose A

    2010-01-01

    This document aims to introduce a total productivity index to measure the economic sustainability of the mining industry. This index will take into account any technical developments, means of use of productive factors (i.e. inefficiencies and scale effects) and the effects on the growth of the geological properties in the resources to be exploited (particularly the effects of resource reduction or reserves depletion). This new index will then be applied to the example of the Spanish mining industry, with some interesting findings regarding the configuration of sustainable mining policies.

  16. New Forces at Work in Mining: Industry View of Critical Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, D. J. [Science and Technology Policy Inst., Arlington, VA (United States); LaTourrette, Tom [Science and Technology Policy Inst., Arlington, VA (United States); Bartis, James T. [Science and Technology Policy Inst., Arlington, VA (United States)

    2007-04-01

    RAND has just published a report entitled, "New Forces at Work in Mining: Industry Views of Critical Technologies," by D. J. Peterson, Tom LaTourrette, and James T. Bartis. The report presents the results of a series of in-depth discussions with leading mining industry representatives selected for their prominent position and their ability to think broadly about technology trends. The discussions highlighted the importance of collaborative technology research, development, and implementation strategies and the increasingly critical role of mine personnel in the utilization of new technologies.

  17. Sustainable production program in the Mexican mining industry: occupational risks

    Directory of Open Access Journals (Sweden)

    Andrea Zavala Reyna

    2015-07-01

    Full Text Available Speaking of mining and sustainability sounds contradictory, as the environmental impact generated by resource extraction is well known. However, there are mining companies that are working to be safe and environmentally friendly. An example of this is presented in this study aimed at identifying occupational risks generated by the activities of a small-scale gold and silver mine located in northwestern Mexico. The methodology followed was a Sustainable Production Program (SPP based on a continuous cycle of five steps in which the tools of cleaner production and pollution prevention are adapted. As a result of this project, it was possible to implement SPP activities: training for workers, use of personal protective equipment and adequate handling of chemicals. As a conclusion, it was verified that SPP application helped this mining company move towards sustainable patterns of production.

  18. A reduction in mining and industrial effluents in the Blesbokspruit ...

    African Journals Online (AJOL)

    2015-10-05

    Oct 5, 2015 ... affects inland freshwater systems, including wetlands (Kerekes et al., 1986 ... acid mine drainage in the Blesbokspruit Wetland has been monitored and ..... through March with the dilution of Na and Cl by rainwater and runoffs ...

  19. Environmental aspects of the Canadian uranium mining industry

    International Nuclear Information System (INIS)

    Yourt, G.R.

    This paper covers a brief history of uranium mining in Canada, environmental problems, control measures, monitoring of various contaminants in air and water, the development and adherence to standards and limited information on cancer incidence and effects of smoking. (author)

  20. FLEXOWELL vertical lift systems in underground mining and construction industries

    Energy Technology Data Exchange (ETDEWEB)

    Paelke, J.W.

    1988-06-01

    Mining and quarrying companies are seeking improved and more continuous transport methods to reduce their costs. Frequently in the past the use of conveyors has been ruled out in steep mining applications but now the Scholtz FLEXOWELL belting which can be used at angles up to the vertical will enable many mines to consider complete belt conveyor systems for the first time. Applications will include steep conveyors for surface mines and quarries in order to eliminate the need for expensive and noisy fleets of trucks and the associated requirements to maintain haul roads. A further field is in the use of steep or vertical conveyors in underground mines to ensure improved continuity of output in existing shaft systems or reduced development costs in new mines. The Scholtz company, a member of the Nokia Group which had sales of about 3.5 billion U.S. Dollars in 1987, has more than 20 years experience with their FLEXOWELL belts. Over 40,000 units are operating around the world. These are already fully proven for vertical lifts of over 100 m (328ft) and up to 500 m (1,640 ft) is possible. Tonnage ratings of up to 4,000 t/h are achievable. Widespread acceptance of this technology has resulted in unique and major installations over the past few years. This paper reviews various applications - from the viewpoint of successfully proven vertical lift systems as well as the maintenance and downtime aspects. 3 refs., 9 figs.

  1. Proceedings of the 1. international workshop on energy management in the mining industry 2010: Enermin

    International Nuclear Information System (INIS)

    2010-01-01

    The first international workshop on energy management in the mining industry, ENERMIN 2010, was held in Santiago, Chile, from November 14th to November 16th, 2010. The purpose of this conference, organized by Gecamin, was to gather experts from the mining industry to analyse some of the principal aspects of reliable, sustainable and low-cost energy supply and the efficient use of energy in mining and metallurgical processes. The conference was attended by over 160 professionals and experts from 11 different countries and participants had the opportunity to hear about some of the latest technologies and to discuss different issues relating to efficient energy use in the mining industry with other experts. 25 out of the 31 papers presented during this conference have been catalogued separately for inclusion in this database

  2. System dynamics model for environment - human systems interaction in the mining industry

    International Nuclear Information System (INIS)

    Pal, B.K.

    1994-01-01

    Use of advanced technology in the mining activities are polluting the natural environment, interfering with the normal life of the miners/residents. In this paper, health hazards due to underground workings and effect of environmental conditions on men are discussed. A composite system inter-relationship of the mining industries with the Government, society and environmental sectors is established. Allowing certain level of pollution, a system dynamics model is developed considering the parameters like more revenues from the mining industries, degradation of quality of life index - environmental index on long-term and short-term basis, new diseases due to pollution, social awareness, health care facilities, tax exemption etc. This model will help us to understand the optimisation of the parameters to establish the better interaction in the environment-human systems in the mining industries. 14 refs., 4 figs., 2 tabs

  3. Pollution reality of gold mining waste on the Witwatersrand

    CSIR Research Space (South Africa)

    Hobbs, PJ

    2010-05-01

    Full Text Available While South Africa has made significant progress in shifting policy frameworks to address mine closure and mine-water management, and the mining industry has changed their practices to conform to new regulations, vulnerabilities in the current...

  4. Data mining practical machine learning tools and techniques

    CERN Document Server

    Witten, Ian H

    2005-01-01

    As with any burgeoning technology that enjoys commercial attention, the use of data mining is surrounded by a great deal of hype. Exaggerated reports tell of secrets that can be uncovered by setting algorithms loose on oceans of data. But there is no magic in machine learning, no hidden power, no alchemy. Instead there is an identifiable body of practical techniques that can extract useful information from raw data. This book describes these techniques and shows how they work. The book is a major revision of the first edition that appeared in 1999. While the basic core remains the same

  5. Legal instruments for controlling exposure of workers to ionizing radiations in mining and its associated industries

    International Nuclear Information System (INIS)

    Yusoff Ismail

    1994-01-01

    Briefly, the existing legal instruments for protection of workers in mining and its associated activities are given. Further, major provisions of the laws relevant to the protection of workers against ionizing radiations in mining and its associated activities are detailed. Finally, practical framework developed by the Atomic Energy Licensing Board, for implementation and enforcement is described

  6. Organisation of work safety in the mining industry; Sicherheitsorganisation im Bergbau

    Energy Technology Data Exchange (ETDEWEB)

    Didier, V. [Bergbau-Berufsgenossenschaft, Bochum (Germany). Referat Unfallverhuetung

    1999-10-07

    The paper summarizes the main findings of a scientific study. Accident figures for the German mining industry indicate that, in comparison with other industries, there is still plenty of scope for increased prevention. However, the rapid development of safety technology alone is still yielding diminishing returns. The main route to increased safety in the mining industry is by way of improved safety management. Various methods are available for analyzing the efficiency of work-safety structures and procedures. Models for the classification of safety-relevant tasks are based on the legally appropriate and organisationally expedient allocation of responsibilities between management and safety experts. An important management tool in this respect is the hazard analysis procedure laid down in the European Union's Health and Safety at Work Act. Practical studies are used to illustrate that safety results can be improved through reorganisation without increasing prime costs. (orig.) [German] Der Beitrag fasst die wesentlichen Ergebnisse einer wissenschaftlichen Studie zusammen: Die Unfallentwicklung im deutschen Bergbau zeigt im Vergleich zu anderen Industriezweigen noch deutliche Reserven fuer die Praevention. Die Fortentwicklung der Sicherheitstechnik fuer sich allein liefert aber nur noch abnehmende Grenzertraege. Eine Strategie technischer und organisatorischer Einzeldirektiven reicht ebenfalls nicht aus. Der Weg zu besseren Sicherheitsresultaten im Bergbau fuehrt vor allem ueber optimierte Ablaeufe des Sicherheitsmanagements. Mit verschiedenen Methoden lassen sich Aufbau- und Ablauforganisation der Arbeitssicherheit auf ihre Effizienz untersuchen. Aus der juristisch implizierten und organisatorisch zweckmaessigen Aufgabenteilung zwischen Fuehrungskraeften und Sicherheitsexperten ergeben sich Zurodnungsmuster fuer sicherheitsrelevante Aufgaben. Ein wichtiges Fuehrungsinstrument sind Gefaehrdungsanalysen nach dem Arbeitsschutzrecht der Europaeischen Union. Anhand

  7. The Effects of the Soledad Canyon Mine on the Aggregate Industry in the Greater Los Angeles Metropolitan Area

    National Research Council Canada - National Science Library

    Dixon, Lloyd

    2001-01-01

    .... In conducting this study, we assume that the mine operates between 2003 and 2022 and analyze how the mine would affect the costs of transporting aggregate, economic profits in the industry, the price...

  8. Question marks of the Czech coal mining industry

    International Nuclear Information System (INIS)

    Dopita, M.; Pesek, J.

    1995-01-01

    An overview of brown and black coal mining in the Czech Republic is presented, and problems of the extent of coal reserves and of the profitability of deep black coal mining are discussed. Costs of coal mining in foreign countries are given. Coal mining in the Czech Republic can be expected to be loss-making unless coal prices are increased. Since coal resources in the Czech Republic are limited, additional nuclear power plants will have to be constructed or else coal for power generation will have to be imported. The environmental aspects of coal mining and burning are discussed. Medium-term and long-term solutions to reduce the environmental burden include thermal power plant desulfurization, application of the fluidized-bed combustion regime to coals with large ash and/or sulfur contents, and introduction of gas in towns and power plants. In the short run, large-scale consumers in towns and coal basins should be obliged to accumulate reserves of low-sulfur coal for later use. (J.B.). 2 tabs., 3 figs., 8 refs

  9. Industry challenge to best practice risk communication.

    Science.gov (United States)

    McEntire, J; Boateng, A

    2012-04-01

    Effective food safety and food defense risk communication helps to inform consumers without causing panic and alarm. The Risk Communication Team of the Natl. Center for Food Protection and Defense has developed a list of 11 best practices recommended for effective risk communication. These practices, designed for a food defense crisis, are currently applied to food safety issues, since fortunately a food defense crisis has yet to occur. IFT examined the utility of these best practices and the limitations on their use during food safety and food defense crises by academics, trade associations, and the government. It was hypothesized that legal and business considerations as well as the nature of the event would determine the implementation of the best practices. Through the use of focus group meetings, it was discovered that there was a low level of awareness of the best practices. However, stakeholders practiced some aspects of the recommended practices. Participants felt some of the practices were related and could be consolidated. They also agreed that a food defense event will increase the urgency of the communication and include players not typically involved in food safety issues. The challenges reported by the stakeholders varied, but legal liability, as well as the impact their communications could have on an industry, were often cited. From the government perspective, their need to act within their authorities drove some of their actions with respect to communication. Determining the differences in communication limitations during food safety against food defense events can provide key information to further developing and refining risk communications and specific messages targeted for a food defense incident. Effective food safety and food defense risk communication helps to inform consumers without causing panic and alarm. Determining the differences in communication limitations during food safety against food defense events can provide key information to

  10. Engineering and the Politics of Commensuration in the Mining and Petroleum Industries

    Directory of Open Access Journals (Sweden)

    Jessica M. Smith

    2018-03-01

    Full Text Available Engineers and applied scientists form the backbone of the mining and petroleum industries, yet rarely figure in social science accounts of natural resource extraction. This article begins to fill that gap by ethnographically exploring how community conflicts have prompted engineers and applied scientists working in these industries to reconsider the relationship between the surface and subsurface dimensions of their work. To make social concerns on the surface matter to how drilling and extraction would happen, they tried to make these two domains legible to one another. Using mapping and modeling, they created new techniques for making “social” concerns visible and actionable by field operators, even as they expressed reservations about unduly flattening the inherent complexity of human thought, action, and emotion in the process. While these practices opened space for other engineers and applied scientists to incorporate the concerns of nearby residents into their plans and practices, they also raised questions about the appropriateness of commensuration, or the process of translation through which things and values are made comparable.

  11. Phytoremediation of industrial mines wastewater using water hyacinth.

    Science.gov (United States)

    Saha, Priyanka; Shinde, Omkar; Sarkar, Supriya

    2017-01-02

    The wastewater at Sukinda chromite mines (SCM) area of Orissa (India) showed high levels of toxic hexavalent chromium (Cr VI). Wastewater from chromium-contaminated mines exhibit potential threats for biotic community in the vicinity. The aim of the present investigation is to develop a suitable phytoremediation technology for the effective removal of toxic hexavalent chromium from mines wastewater. A water hyacinth species Eichhornia crassipes was chosen to remediate the problem of Cr (VI) pollution from wastewater. It has been observed that this plant was able to remove 99.5% Cr (VI) of the processed water of SCM in 15 days. This aquatic plant not only removed hexavalent Cr, but is also capable of reducing total dissolved solids (TDS), biological oxygen demand (BOD), chemical oxygen demand (COD), and other elements of water also. Large-scale experiment was also performed using 100 L of water from SCM and the same removal efficiency was achieved.

  12. Phytoremediation of industrial mines wastewater using water hyacinth

    Science.gov (United States)

    Saha, Priyanka; Shinde, Omkar; Sarkar, Supriya

    2017-01-01

    ABSTRACT The wastewater at Sukinda chromite mines (SCM) area of Orissa (India) showed high levels of toxic hexavalent chromium (Cr VI). Wastewater from chromium-contaminated mines exhibit potential threats for biotic community in the vicinity. The aim of the present investigation is to develop a suitable phytoremediation technology for the effective removal of toxic hexavalent chromium from mines wastewater. A water hyacinth species Eichhornia crassipes was chosen to remediate the problem of Cr (VI) pollution from wastewater. It has been observed that this plant was able to remove 99.5% Cr (VI) of the processed water of SCM in 15 days. This aquatic plant not only removed hexavalent Cr, but is also capable of reducing total dissolved solids (TDS), biological oxygen demand (BOD), chemical oxygen demand (COD), and other elements of water also. Large-scale experiment was also performed using 100 L of water from SCM and the same removal efficiency was achieved. PMID:27551860

  13. Economic statistics for the mining and metallurgical industries - 1978 and 1979

    Energy Technology Data Exchange (ETDEWEB)

    Medaets, J.

    1982-04-01

    The statistics are compiled in 5 sections : 1) The mining industries (coal, metallurgy, quarries and associated industries); 2) The manufacture of coke and briquettes; 3) Iron and steel; 4) Hydrology; and 5) The extraction of sand on Belgium's 'continental shelf'.

  14. Radiation protection in uranium mining and metallurgical industries

    International Nuclear Information System (INIS)

    Pan Yingjie.

    1988-01-01

    The main radioactive contaminants in uranium mines are radon and its daughters, while in uranium plants the dust produced in crushing operation is the main source of contamination. In this paper the radiation protection levels and the problems present in China's uranium mines and plants are described and analyzed. 15 protective measures are presented by the auther. The main measurements are: to increase mechanization and automation levels in technology, to reduce the direct contact of man's body with radioactive materials, to strongthen the ventilation for removing radon, to establish a complete ventilation system, and so on

  15. Intelligent Mining Engineering Systems in the Structure of Industry 4.0

    Directory of Open Access Journals (Sweden)

    Rylnikova Marina

    2017-01-01

    Full Text Available The solution of the problem of improving the human environment and working conditions at mines is based on the provision of the rationale of parameters and conditions for the implementation of an environmentally balanced cycle of comprehensive development of mineral deposits on the basis of the design of mining engineering systems characterized by the minimization of the human factor effect in danger zones of mining operations. In this area, robotized technologies are being developed, machinery and mechanisms with the elements of artificial intelligence, and mining and transport system automatic controls are being put into service throughout the world. In the upcoming decades, mining machines and mechanisms will be virtually industrial robots. The article presents the results of zoning of open-pit and underground mine production areas, as well as mining engineering system of combined development depending on the fact and periodicity of human presence in zones of mining processes. As a surface geotechnology case study, the software structure based on a modular concept is described. The performance philosophy of mining and transport equipment with the elements of artificial intelligence is shown when it is put into service in an open pit.

  16. Intelligent Mining Engineering Systems in the Structure of Industry 4.0

    Science.gov (United States)

    Rylnikova, Marina; Radchenko, Dmitriy; Klebanov, Dmitriy

    2017-11-01

    The solution of the problem of improving the human environment and working conditions at mines is based on the provision of the rationale of parameters and conditions for the implementation of an environmentally balanced cycle of comprehensive development of mineral deposits on the basis of the design of mining engineering systems characterized by the minimization of the human factor effect in danger zones of mining operations. In this area, robotized technologies are being developed, machinery and mechanisms with the elements of artificial intelligence, and mining and transport system automatic controls are being put into service throughout the world. In the upcoming decades, mining machines and mechanisms will be virtually industrial robots. The article presents the results of zoning of open-pit and underground mine production areas, as well as mining engineering system of combined development depending on the fact and periodicity of human presence in zones of mining processes. As a surface geotechnology case study, the software structure based on a modular concept is described. The performance philosophy of mining and transport equipment with the elements of artificial intelligence is shown when it is put into service in an open pit.

  17. Cooperation with Emerging Countries in Advanced Mining Training Programmes Involving an Industrial Partner

    Energy Technology Data Exchange (ETDEWEB)

    Ahmadzadeh, H., E-mail: Hossein.Ahmadzadeh@ema.fr [CESMAT, CESSEM, Alès (France); Petitclerc, J-L. [AREVA NC, Paris (France)

    2014-05-15

    After about 20 years at a low level of activity the global uranium mining industry has been enjoying a significant expansion since about 2003. However, it is apparent that the “quiet” period has led to a shortage of new staff coming into the industry, many middle ranking and skilled professionals have moved to other industries and many of the remaining staff is fast approaching retirement. Many organizations are looking at ways to address this situation as quickly and effectively as possible, including governments, industry and the IAEA. This paper describes one training programme that has been developed, and is currently being implemented, as a joint venture between the uranium mining company AREVA NC and the Centre for Advanced Studies of Mineral Resources, which is located at the School of Mines in Ales, France. (author)

  18. Decision-making on the integration of renewable energy in the mining industry: A case studies analysis, a cost analysis and a SWOT analysis

    Directory of Open Access Journals (Sweden)

    Kateryna Zharan

    2017-01-01

    Full Text Available The mining industry is showing increasing interest in using renewable energy (RE technologies as one of the principles of sustainable mining. This is witnessed in several pilot projects in major mining countries around the world. Positive factors which favor this interest are gaining importance and negative barrier factors seem to be less relevant. For a mine operator, the switch from fossil fuel to RE technologies is the outcome of decision making processes. So far, research about such decision making on the use of RE in mining is underdeveloped. The purpose of this paper to present a practical decision rule based on a principle of indifference between RE and fossil fuel technologies and on appropriate time management. To achieve this objective, three investigations are made: (i a case studies analysis, (ii a comparative cost analysis, and (iii a SWOT analysis.

  19. Tolley's industrial and commercial gas installation practice

    CERN Document Server

    Hazlehurst, John

    2010-01-01

    This is the third of three essential reference volumes for those concerned with the installation and servicing of domestic and industrial gas equipment. This volume explains the basic principles underlying the practical and theoretical aspects of installing and servicing gas appliances and associated equipment, from the basics of combustion, to burners, pressure and flow, transfer of heat, controls, as well as materials and processes, electrical aspects, and metering and measuring devices. Covering both Natural Gas and Liquefied Petroleum Gas, the many illustrations and worked examples include

  20. Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T. V.

    1974-01-01

    The author has identified the following significant results. The mine refuse inventory maps were prepared in response to a need by both the State and the coal industry. The lack of information on the scope of the problem handicapped all people concerned in drafting realistic legislation for a severance tax on coal production to raise funds for restoration of refuse sites. The inventory was conducted rapidly and economically, and demonstrated the benefits which can be derived through remote sensing methods.

  1. Leader empowering behaviour, organisational commitment and turnover intention within the gold mining industry / Zelna Maré

    OpenAIRE

    Maré, Zelna

    2007-01-01

    The mining industry has been under enormous pressure in the past few years. particularly with issues around production and costs. As far as human capital is concerned. the gold industry has seen a high degree of shrinkage in personnel. In order to be able to cope with the continuous challenges faced by the mining industry, mining organisations need leaders of the highest standards. Due to the challenge of increasing productivity levels, empowerment is required within the gold ...

  2. Geotechnical characterization of mined clay from Appalachian Ohio: challenges and implications for the clay mining industry.

    Science.gov (United States)

    Moran, Anthony R; Hettiarachchi, Hiroshan

    2011-07-01

    Clayey soil found in coal mines in Appalachian Ohio is often sold to landfills for constructing Recompacted Soil Liners (RSL) in landfills. Since clayey soils possess low hydraulic conductivity, the suitability of mined clay for RSL in Ohio is first assessed by determining its clay content. When soil samples are tested in a laboratory, the same engineering properties are typically expected for the soils originated from the same source, provided that the testing techniques applied are standard, but mined clay from Appalachian Ohio has shown drastic differences in particle size distribution depending on the sampling and/or laboratory processing methods. Sometimes more than a 10 percent decrease in the clay content is observed in the samples collected at the stockpiles, compared to those collected through reverse circulation drilling. This discrepancy poses a challenge to geotechnical engineers who work on the prequalification process of RSL material as it can result in misleading estimates of the hydraulic conductivity of the samples. This paper describes a laboratory investigation conducted on mined clay from Appalachian Ohio to determine how and why the standard sampling and/or processing methods can affect the grain-size distributions. The variation in the clay content was determined to be due to heavy concentrations of shale fragments in the clayey soils. It was also concluded that, in order to obtain reliable grain size distributions from the samples collected at a stockpile of mined clay, the material needs to be processed using a soil grinder. Otherwise, the samples should be collected through drilling.

  3. Using MSD prevention for cultural change in mining: Queensland Government/Anglo Coal Industry partnership.

    Science.gov (United States)

    Tilbury, Trudy; Sanderson, Liz

    2012-01-01

    Queensland Mining has a strong focus on safety performance, but risk management of health, including Musculoskeletal Disorders (MSDs) continues to have a lower priority. The reliance on individual screening of workers and lower level approaches such as manual handling training is part of the coal mining 'culture'. Initiatives such as the New South Wales and Queensland Mining joint project to develop good practice guidance for mining has allowed for a more consistent message on participatory ergonomics and prevention of MSD. An evidence based practice approach, including the introduction of participatory ergonomics and safe design principles, was proposed to Anglo American Coal operations in Queensland. The project consisted of a skills analysis of current health personnel, design of a facilitated participatory ergonomics training program, site visits to identify good practice and champions, and a graduated mentoring program for health personnel. Early results demonstrate a number of sites are benefiting from site taskforces with a focus on positive performance outcomes.

  4. Managing the IE (Industrial Engineering Mindset: A quantitative investigation of Toyota’s practical thinking shared among employees

    Directory of Open Access Journals (Sweden)

    Phillip Marksberry

    2011-12-01

    Full Text Available Purpose: The goal of this work was to investigate the managerial practices of today to understand if Toyota is sheltering themselves from these newer practices or embracing them like most believe.Design/methodology/approach: This work utilizes a new form of data mining named Latent Semantic Analysis (LSA to analyze an organizations ideal management practices.Findings: This work shows quantitatively that TPS favors earlier versions of industrial engineering compared to the optimization techniques available today.Originality/value: The use of data mining to analyze organizational management practices.

  5. Towards total productive maintenance in the Eastern European mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Buck, J.D. [Kepner-Tregoe (United Kingdom) Ltd., Windsor

    1999-08-01

    An European Union consultancy project was undertaken to install a `best-in-class` maintenance system for the lignite mines of Romania. The project, funded by PHARE, started with a critical analysis of the maintenance and repair systems of equipment in both the open-pit and underground mines operated by RALO (Regia Autonoma a Lignitului Octenia). This study paved the way for the introduction of a computerised maintenance system and the inception of a planned preventative maintenance scheme. A development strategy leading by a structural methodology towards predictive maintenance and total productive maintenance was drawn up and attention was given to multi-skilling, training and further facilitating activities to enable the success of the total productive maintenance strategy. An abridged version of the paper was presented at MAINTE 97, held in Birmingham, UK in 1997. 5 refs., 5 figs., 1 tab.

  6. Mine Clearance Industry: Background, Geography, Funding, Analysis and Future Projections

    Science.gov (United States)

    2007-12-01

    and against the Zulu .39 In Sudan, during the defense of Khartoum, British officers believed that landmines were an effective form of defense.40...parties from attack during the Zulu Wars (1879).42 During the Boer War (1899-1902) the British used mines to protect a railway; a Royal Engineer...to fight the landmine problem was the Hazardous Area Life-Support Organization (HALO Trust) in 1988. The founder of HALO Trust was former British

  7. Energy conservation efforts in Indian mining industry - an overview

    International Nuclear Information System (INIS)

    Pradhan, G.K.; Chattoraj, P.

    2010-01-01

    Conservation of energy is a national agenda as had been set by our Prime Minister at various fora, in the case of coal mining also there is ample scope to reduce specific energy conservation. The issue can be resolved through 'energy audit' so as to identify the areas of improvement, technology to introduce and innovative system to adopt. In a nutshell it can be concluded that, through energy audit, we can immediately save 10-15 % of energy without any major investment

  8. Cancer incidence among Minnesota taconite mining industry workers.

    Science.gov (United States)

    Allen, Elizabeth M; Alexander, Bruce H; MacLehose, Richard F; Nelson, Heather H; Ramachandran, Gurumurthy; Mandel, Jeffrey H

    2015-11-01

    To evaluate cancer incidence among Minnesota taconite mining workers. We evaluated cancer incidence between 1988 and 2010 in a cohort of 40,720 Minnesota taconite mining workers used between 1937 and 1983. Standardized incidence ratios (SIRs) with 95% confidence intervals (CIs) were estimated by comparing numbers of incident cancers with frequencies in the Minnesota Cancer Surveillance System. SIRs for lung cancer by histologic subtypes were also estimated. We adjusted for out-of-state migration and conducted a probabilistic bias analysis for smoking-related cancers. A total of 5700 cancers were identified, including 51 mesotheliomas and 973 lung cancers. The SIRs for lung cancer and mesothelioma were 1.3 (95% CI = 1.2-1.4) and 2.4 (95% CI = 1.8-3.2), respectively. Stomach, laryngeal, and bladder cancers were also elevated. However, adjusting for potential confounding by smoking attenuated the estimates for lung (SIR = 1.1, 95% CI = 1.0-1.3), laryngeal (SIR = 1.2, 95% CI = 0.8-1.6), oral (SIR = 0.9, 95% CI = 0.7-1.2), and bladder cancers (SIR = 1.0, 95% CI = 0.8-1.1). Taconite workers may have an increased risk for certain cancers. Lifestyle and work-related factors may play a role in elevated morbidity. The extent to which mining-related exposures contribute to disease burden is being investigated. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Modern environmental and economic approach of mining industry

    Directory of Open Access Journals (Sweden)

    Carsten Drebenstedt

    2013-03-01

    Full Text Available In the article, the need of transition to the rational subsoil use (the alternative mining approach is proved, which unlike general one supposes the increasing of extraction rate of valuable components in the deposit and multiple use of raw materials, the maximizing recycling, the decreasing of land occupation, the increasing of the development period of deposit at some income decrease up to the moderate level, which is enough to provide the attraction for investors. The multicriteriality is considered as the crucial principle of rational subsoil use at taking management decisions, i.e. the considering of ecological, economic and social targets, aimed at receiving moderate profit at proper social and environmental standards. The graphic representation of models of the general mining approach and the alternative one allows to emphasize the specified advantages of transition to rational subsoil resources development and reflect them in design equation. In the paper, three performance strategies providing the implementation of the alternative approach are offered: full-field development, application ecologically and economically effective systems and the development processes, consideration of reclamation and minimization of long term environmental effects of mining

  10. Ergonomics of mining machinery and transport in the South African mining industry.

    CSIR Research Space (South Africa)

    Schutte, PC

    2003-03-01

    Full Text Available this background, a study was conducted to assess the ergonomics of a number of mining machines and transport systems to identify the ergonomics-related hazards that could impact on the operators’ ability to work safely and efficiently....

  11. The radiological impact of past and present practices of the mineral sands industry in Queensland

    International Nuclear Information System (INIS)

    Alexander, E.G.; Stewart, N.D.; Wallace, B.J.

    1993-01-01

    It is shown that the introduction of uniform Australian national Codes of Practice for radiation protection in the mining and milling of radioactive ores in the early 1980's has led to the mining and health regulatory authorities implementing the provisions of the Codes. Deficiencies involving dust and external gamma radiation levels in the mineral sands industry have led to various administrative and engineering controls being introduced to reduce the levels of radiation doses to employees well below 20 mSv/y limit. There are guidelines for screening the radioactivity of tailings released into the environment and some products for industrial use. Future activities by the regulatory authorities and industry will involve an optimisation of radiation protection, ongoing remedial programs, register of data about contaminated lands and assessments of the environmental, occupational and the public radiological impacts from downstream processing of mineral sands. The latter involves synthetic rutile, zircon flour, rare earth and refractory technologies. 7 refs., 1 tab., 1 fig

  12. Environmental impact assessment of european non-ferro mining industries through life-cycle assessment

    Science.gov (United States)

    Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

    2018-05-01

    European mining industries are the vast industrial sector which contributes largely on their economy which constitutes of ferro and non-ferro metals and minerals industries. The non-ferro metals extraction and processing industries require focus of attention due to sustainability concerns as their manufacturing processes are highly energy intensive and impacts globally on environment. This paper analyses major environmental effects caused by European metal industries based on the life-cycle impact analysis technologies. This research work is the first work in considering the comparative environmental impact analysis of European non-ferro metal industries which will reveal their technological similarities and dissimilarities to assess their environmental loads. The life-cycle inventory datasets are collected from the EcoInvent database while the analysis is done using the CML baseline and ReCipe endpoint method using SimaPro software version 8.4. The CML and ReCipe method are chosen because they are specialized impact assessment methods for European continent. The impact categories outlined for discussion here are human health, global warming and ecotoxicity. The analysis results reveal that the gold industry is vulnerable for the environment due to waste emission and similar result retained by silver mines a little bit. But copper, lead, manganese and zinc mining processes and industries are environment friendly in terms of metal extraction technologies and waste emissions.

  13. Regulatory issues associated with exclusion, exemption, and clearance related to the mining and minerals processing industries

    International Nuclear Information System (INIS)

    Metcalf, P.; Woude, S. van der; Keenan, N.; Guy, S.

    1997-01-01

    The concepts of exclusion, exemption and clearance have been established in international recommendations and, standards for radiation protection and the management of radioactive waste in recent years. The consistent application of these concepts has given rise to various problems in different spheres of use. This is particularly the case in the mining and minerals processing industries dealing with materials exhibiting elevated concentrations of naturally occurring radionuclides. This paper takes the South African mining industry as an example and highlights some of the issues that have arisen in applying these concepts within a regulatory control regime. (author)

  14. Geotechnical Characterization of Mined Clay from Appalachian Ohio: Challenges and Implications for the Clay Mining Industry

    Science.gov (United States)

    Moran, Anthony R.; Hettiarachchi, Hiroshan

    2011-01-01

    Clayey soil found in coal mines in Appalachian Ohio is often sold to landfills for constructing Recompacted Soil Liners (RSL) in landfills. Since clayey soils possess low hydraulic conductivity, the suitability of mined clay for RSL in Ohio is first assessed by determining its clay content. When soil samples are tested in a laboratory, the same engineering properties are typically expected for the soils originated from the same source, provided that the testing techniques applied are standard, but mined clay from Appalachian Ohio has shown drastic differences in particle size distribution depending on the sampling and/or laboratory processing methods. Sometimes more than a 10 percent decrease in the clay content is observed in the samples collected at the stockpiles, compared to those collected through reverse circulation drilling. This discrepancy poses a challenge to geotechnical engineers who work on the prequalification process of RSL material as it can result in misleading estimates of the hydraulic conductivity of the samples. This paper describes a laboratory investigation conducted on mined clay from Appalachian Ohio to determine how and why the standard sampling and/or processing methods can affect the grain-size distributions. The variation in the clay content was determined to be due to heavy concentrations of shale fragments in the clayey soils. It was also concluded that, in order to obtain reliable grain size distributions from the samples collected at a stockpile of mined clay, the material needs to be processed using a soil grinder. Otherwise, the samples should be collected through drilling. PMID:21845150

  15. Geotechnical Characterization of Mined Clay from Appalachian Ohio: Challenges and Implications for the Clay Mining Industry

    Directory of Open Access Journals (Sweden)

    Anthony R. Moran

    2011-06-01

    Full Text Available Clayey soil found in coal mines in Appalachian Ohio is often sold to landfills for constructing Recompacted Soil Liners (RSL in landfills. Since clayey soils possess low hydraulic conductivity, the suitability of mined clay for RSL in Ohio is first assessed by determining its clay content. When soil samples are tested in a laboratory, the same engineering properties are typically expected for the soils originated from the same source, provided that the testing techniques applied are standard, but mined clay from Appalachian Ohio has shown drastic differences in particle size distribution depending on the sampling and/or laboratory processing methods. Sometimes more than a 10 percent decrease in the clay content is observed in the samples collected at the stockpiles, compared to those collected through reverse circulation drilling. This discrepancy poses a challenge to geotechnical engineers who work on the prequalification process of RSL material as it can result in misleading estimates of the hydraulic conductivity of the samples. This paper describes a laboratory investigation conducted on mined clay from Appalachian Ohio to determine how and why the standard sampling and/or processing methods can affect the grain-size distributions. The variation in the clay content was determined to be due to heavy concentrations of shale fragments in the clayey soils. It was also concluded that, in order to obtain reliable grain size distributions from the samples collected at a stockpile of mined clay, the material needs to be processed using a soil grinder. Otherwise, the samples should be collected through drilling.

  16. Early Phase Process Evaluation: Industrial Practices

    Directory of Open Access Journals (Sweden)

    Zulfan Adi Putra

    2016-09-01

    Full Text Available Process route evaluation is a part of research and development (R&D works in an industrial chemical project life cycle. In this early phase, good process evaluation, including process synthesis and designs, provide guidance’s on the R&D project. The paper aimed to collect practical methods used in this early phase process route evaluation from author’s 10 years of industrial experiences.  The collected methods range from forward-backward process synthesis, functional process design, use of cost estimation, and applications of Monte Carlo simulation. Led by a good project management (e.g. via a stage-gate approach use of these methods have shown beneficial results. Some important results are strong arguments on whether or not the project will continue, as well as relevant technical and economic issues identified during this early phase process synthesis and design. Later on, these issues become guidance’s to the follow-up project, if it is continued.

  17. Environmental impact of the gold mining industry in Ghana

    International Nuclear Information System (INIS)

    Bamford, S.A.; Osae, E.; Aboh, I.; Biney, C.A.; Antwi, L.A.

    1990-01-01

    X-ray Fluorescence (XRF) Analysis and Atomic Absorption Spectrophotometry (AAS) have been used in assessing heavy metal pollution from some gold mines in Ghana. The presence and levels of heavy metals in gold ore, gold tailing, inland waters, and river sediments have been determined. Using these techniques, the heavy metals: Cr, Mn, Fe, Cu, Zn, As, Pb, Rb, Sr, Y, Zr, and Nb were identified in some of the solid samples within a concentration range of 0.08 ppm-4.9%. However, the inland waters showed the presence of only Fe and Zn at levels of 0.08-2.4 μg/mL

  18. Options report for the mining, non-ferrous metal smelting and refining industry

    International Nuclear Information System (INIS)

    1999-10-01

    This plant level analysis involved the study of three Canadian mines from ore extraction to refining. Energy consumption and GHG emissions from each facility were examined, along with projects to reduce these emissions. Results showed variation in emissions between firms by orders of magnitude, and while GHG reducing projects do exist, many are not implemented for economic and business reasons. Nevertheless, a modelling analysis of the mining industry as a whole showed that the industry should be able to reduce its GH emissions to within range of the Kyoto target. Enhanced voluntary initiatives, already supported by the industry, are seen as the most cost effective means of achieving these emission reductions. Industry experts suggest more effort to be expended on identifying GHG reducing technologies and competing projects with higher returns on investment. There is incontrovertible evidence that energy efficiency measures are often not implemented by the industry because their return on investment are not as attractive as those associated with process improvement projects. With appropriate assistance from government, such as funding for comprehensive energy audits similar to the plant level analysis done for this report, funding for carrying out the detailed economic evaluation of these projects, help with specialized human resources to participate in enhanced voluntary activities (such as the energy audits and life cycle cost/benefit analysis), and financial incentives to create more attractive returns on investment for energy efficiency/GHG emission reduction projects, the Canadian mining industry will be, and can be, part of the solution towards reducing GHG emissions. Other avenues that could be helpful in this effort include exporting Canadian mining technology to aid in reaching a global solution to a global problem, recognition for the Canadian mining industry for its northern operations, credit for Canada for embodied energy in exports, and recycling to

  19. Ensuring the Environmental and Industrial Safety in Solid Mineral Deposit Surface Mining

    Science.gov (United States)

    Trubetskoy, Kliment; Rylnikova, Marina; Esina, Ekaterina

    2017-11-01

    The growing environmental pressure of mineral deposit surface mining and severization of industrial safety requirements dictate the necessity of refining the regulatory framework governing safe and efficient development of underground resources. The applicable regulatory documentation governing the procedure of ore open-pit wall and bench stability design for the stage of pit reaching its final boundary was issued several decades ago. Over recent decades, mining and geomechanical conditions have changed significantly in surface mining operations, numerous new software packages and computer developments have appeared, opportunities of experimental methods of source data collection and processing, grounding of the permissible parameters of open pit walls have changed dramatically, and, thus, methods of risk assessment have been perfected [10-13]. IPKON RAS, with the support of the Federal Service for Environmental Supervision, assumed the role of the initiator of the project for the development of Federal norms and regulations of industrial safety "Rules for ensuring the stability of walls and benches of open pits, open-cast mines and spoil banks", which contribute to the improvement of economic efficiency and safety of mineral deposit surface mining and enhancement of the competitiveness of Russian mines at the international level that is very important in the current situation.

  20. Use of natural gamma radiation in the coal mining industry

    International Nuclear Information System (INIS)

    Wykes, J.S.; Adsley, I.; Cooper, L.R.

    1982-01-01

    The technique of delineating coal seams by the use of natural gamma borehole logging sondes has been known for many years. The principle of the technique is that the gamma fluxes in shales are higher than in coals as the abundance of naturally occurring radionuclides is some twenty times greater in the former. This paper discusses other applications where the differeing natural gamma properties of coals and shales can be used. These are: (a) To distinguish between stone (shale) and run-of-mine coal on conveyor belts. A common situation underground is one in which stone from development headings and normal run-of-mine coal have to be batched along the same conveyor system. A natural gamma device capable of distinguishing between such batches of material, and thus allowing suitable mechanical separation, will be described. (b) To provide an accurate measurement of roof coal thickness by measuring the natural gamma flux penetrating the roof coal. To illustrate this examples will be given where this technique is used to provide automatic controlled steering of Long Wall Shearers and to provide manually assisted steering of In-seam Heading Machines

  1. Developments in the application of underground battery vehicles in the UK coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Fortune, J A.B.; Crawshaw, S A.M. [Long-Airdox International Ltd. (United Kingdom)

    1996-10-01

    Trackless battery powered haulage vehicles have been in operation in British coal mines principally for longwall face transfer and personnel transportation. Changes within the industry have resulted in the introduction of room and pillar coal mining methods and the introduction of increasingly heavier longwall roof supports. This has resulted in the introduction of: battery powered coal haulage machines, which, without the need for trailing cables, increase productivity within room and pillar mining; and battery powered longwall shield haulers which are capable of carrying the heaviest shield supports currently being utilised within the British coal mining industry. The conventional machines have been adapted from an American design to meet the requirements of European legislation. This has seen the emphasis being placed upon the supplier with the European Machinery Directive being introduced, necessitating the assigning of a `CE` mark to each vehicle. Battery vehicle technology has advanced to meet the demands of the ever changing market and will no doubt be further adapted to meet the requirement of the British coal mining industry. 1 ref., 12 figs., 3 tabs.

  2. Lignite industry in Greece within a world context: Mining, energy supply and environment

    International Nuclear Information System (INIS)

    Kavouridis, Konstantinos

    2008-01-01

    Today coal covers 38% of global production and roughly 30% of the EU-25 power output. In 2005 domestic lignite with a share of 60.5% in power generation and accounting about 30% of primary energy consumption is currently the most important indigenous fuel of Greece. Greece, mining 70 Mt annually, is the second lignite producer in the EU and fourth in the world. Approximately 97% of the lignite used to supply the existing lignite-fired power plants of Greece is mined by Public Power Corporation S.A. (PPC). Lignite as the base load fuel gives a competitive strength in PPC's and Greece's fuel mix. Due to lignite consumer prices in Greece are significantly below those in other comparable markets in EU-15. Extraction of lignite has a very long tradition. Significant achievements and large experience which has been gained during many years of mining operations place Greek lignite-mining industry in the leading position in Europe. The paper presents current state of Greek lignite industry, including operating mines, volume of production and other important production indicators as well as improvements in labor productivity and good results in industrial safety. The future of coal and specifically of Greek lignite will be crucially determined by environmentally compatible, i.e. low-CO 2 generation of electricity. Investment in modernization and renewal of the power plant fleet are the key to securing electricity supply and progress in preventing climate change

  3. A European Competence Framework for Industrial Pharmacy Practice in Biotechnology

    NARCIS (Netherlands)

    Atkinson, Jeffrey; Crowley, Pat; De Paepe, Kristien; Gennery, Brian; Koster, Andries|info:eu-repo/dai/nl/070975558; Martini, Luigi; Moffat, Vivien; Nicholson, Jane; Pauwels, Gunther; Ronsisvalle, Giuseppe; Sousa, Vitor; van Schravendijk, Chris; Wilson, Keith

    2015-01-01

    The PHAR-IN (“Competences for industrial pharmacy practice in biotechnology”) looked at whether there is a difference in how industrial employees and academics rank competences for practice in the biotechnological industry. A small expert panel consisting of the authors of this paper produced a

  4. CSR Disclosures in the Mining Industry: Empirical Evidence from Listed Mining Firms in Indonesia

    OpenAIRE

    Rina Asmeri; Tika Alvionita; Ardi Gunardi

    2017-01-01

    Companies that are involved in CSR strive to meet the expectations of stakeholders. Therefore, CSR and CSR reporting are tools of legitimacy to demonstrate its obedience (legitimacy theory). This study aims to look at empirical evidence on the effect of profitability and environmental performance on CSR disclosure. This study examined the target population of mining companies listed on the Indonesian Stock Exchange that included the CSR reporting in the 2010-2014 annual report, obtained a sam...

  5. Operational Decision Support for Material Management in Continuous Mining Systems: From Simulation Concept to Practical Full-Scale Implementations

    Directory of Open Access Journals (Sweden)

    Masoud Soleymani Shishvan

    2017-07-01

    Full Text Available Material management in opencast mines is concerned with planning, organizing, and control of the flow of materials from their extraction points to destinations. It can be strongly affected by operational decisions that have to be made during the production process. To date, little research has focused on the application of simulation modeling as a powerful supportive tool for decision making in such systems. Practical experiences from implementing a simulation model of a mine for the operational support on an industrial scale are not known to the authors. This paper presents the extension of a developed stochastic simulation model by the authors from a conceptual stage (TRL4 to a new Technology Readiness Level (TRL 6 by implementing it in an industrially relevant environment. A framework for modeling, simulation, and validation of the simulation model applied to two large opencast lignite mines is presented in detail. Operational implementation issues, experiences, and challenges in practical applications are discussed. Furthermore, the strength of applying the simulation modeling as an operational decision support for material management in coal mining is demonstrated. Results of the case studies are used to describe the details of the framework, and to illustrate the strength and limitations of its application.

  6. Environmental management plan of the mining and industrial uranium complex in Brazil

    International Nuclear Information System (INIS)

    Figuereido, N.; Hilton, M.; Wiikman, L.; Oliveira, M.; Taddei, J.

    1996-01-01

    The Mining and Industrial Complex of the Pocos de Caldas Plateau (CIPC) is located at Caldas, county in the southwest of Minas Gerais state. It is a plant of the Industrias Nucleares do Brazil S.A. -INB, the only installation in Brazil for the production of uranium concentrate (yellow-cake) as ammonium diuranate (Adu). The Environmental protection and control program in practice assures the environmental management plan, in operation, maintaining the Complex within technology standards required by updated environmental concepts. The mine is an open pit operation with a surface diameter of 1000 m and an actual average depth of 120 m. Some 44 x 10 6 m 3 of the overburden material were used in embankments structures to civil engineering works in the implantation of several installations in CIPC, and the other portion of the removed material was deposited in two pre-selected areas having both an upper area of about 2,0 x 10 6 m 2 . The annual average volume of waters transported to chemical treatment is about 9,0 x 10 5 m 3 . The mill, in its full operation, processes 2500 t of ore per day and the solid and liquid tailings are directed to a waste pond system where are contained approximately 2,0 x 10 6 m 3 (2,2 x 10 6 t) of solid wastes with an estimation of further 70 x 10 5 m 3 to be disposed. The upper surface of tailings pond is about 2,0 x 10 5 m 2 . Nowadays, the environmental protection and control program aims to the development of potential pollutant areas stabilization reintegrating them into their original features or adjusting them to other forms of laudable restoration. (authors). 1 fig

  7. Industrial mining forecasts for the North East of Spain

    International Nuclear Information System (INIS)

    Ramirez, A.

    1993-01-01

    The North-Eastern part of Spain shows a variety of lithologies morphologies and structures. A lot of different ores can be found but deposit reserves are very scarce and widespread. Metallic mines were important in the past but now are spent. All types of coal are present but deposits are small and exploitation has reduced very much the reserves. Only uranium and lignite are significant materials but the current trends of international prices makes not north their extraction. Gas and Petroleum are being extracted and their well known deposits will keep activity as nowadays. The paper makes and additional review on other non-energetic ores like special clays, sodium an potassium salts, sodium sulphates, gypsum and other

  8. Morphometric characterization in basins affected by the mining industry

    International Nuclear Information System (INIS)

    Moreno Bortons, J.; Alonso Sarria, F.; Romero Diaz, A.; Belmonte Serrato, F.

    2009-01-01

    The intensive exploitation in the mining district of Cartagena la Union during recent centuries has generated a huge amount of waste scattered throughout the Sierra Minera. These debris act a dangerous pollution agent in the drainage network because the generated runoff erodes and disperse these wastes that are highly contaminated by heavy metals. In this way, the drainage networks of the study area been characterized to assess the production of runoff in basins which are sterile deposits, using the method of the Geomorphologic Unit Hydrography (GUH). The peak flows that have been obtained, taking into account the erodibility of soils, are capable of carrying large amounts of pollutants into the two main outlet areas (Mar Menor and Mediterranean Sea), meaning an important source of pollution int two sites of high ecological value. (Author) 6 refs.

  9. Engineering and the Politics of Commensuration in the Mining and Petroleum Industries

    OpenAIRE

    Jessica M. Smith; Nicole M. Smith

    2018-01-01

    Engineers and applied scientists form the backbone of the mining and petroleum industries, yet rarely figure in social science accounts of natural resource extraction. This article begins to fill that gap by ethnographically exploring how community conflicts have prompted engineers and applied scientists working in these industries to reconsider the relationship between the surface and subsurface dimensions of their work. To make social concerns on the surface matter to how drilling and extra...

  10. Biological recovery of metals, sulfur and water in the mining and metallurgical industry

    NARCIS (Netherlands)

    Weijma, J.; Copini, C.F.M.; Buisman, C.J.N.; Schultz, C.E.

    2002-01-01

    Metals of particular interest in acid mine drainage and industrial wastewaters include copper, zinc, cadmium, arsenic, manganese, aluminum, lead, nickel, silver, mercury, chromium, uranium and iron, in a concentration that can range from 106 to 102 g/l. The composition of such wastewater reflects

  11. A case in support of implementing innovative bio-processes in the metal mining industry

    NARCIS (Netherlands)

    Sanchez Andrea, I.; Stams, A.J.M.; Weijma, J.; Gonzalez Contreras, P.A.; Dijkman, H.; Rozendal, R.A.; Johnson, D.B.

    2016-01-01

    The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements.

  12. A case in support of implementing innovative bio-processes in the metal mining industry.

    Science.gov (United States)

    Sánchez-Andrea, Irene; Stams, Alfons J M; Weijma, Jan; Gonzalez Contreras, Paula; Dijkman, Henk; Rozendal, Rene A; Johnson, D Barrie

    2016-06-01

    The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements. Typically about 99% of solid material hauled to, and ground at, the land surface currently ends up as waste (rock dumps and mineral tailings). Exposure of these to air and water frequently leads to the formation of acidic, metal-contaminated run-off waters, referred to as acid mine drainage, which constitutes a severe threat to the environment. Formation of acid drainage is a natural phenomenon involving various species of lithotrophic (literally 'rock-eating') bacteria and archaea, which oxidize reduced forms of iron and/or sulfur. However, other microorganisms that reduce inorganic sulfur compounds can essentially reverse this process. These microorganisms can be applied on industrial scale to precipitate metals from industrial mineral leachates and acid mine drainage streams, resulting in a net improvement in metal recovery, while minimizing the amounts of leachable metals to the tailings storage dams. Here, we advocate that more extensive exploitation of microorganisms in metal mining operations could be an important way to green up the industry, reducing environmental risks and improving the efficiency and the economy of metal recovery. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Effects of the energy and mining industry on management of national competitiveness

    Directory of Open Access Journals (Sweden)

    Peter Madzík

    2016-04-01

    influence of energy and mining industry on competitiveness over the last 40 years has increased, particularly in the case of countries with low or medium economic development, and it has decreased in developed countries. The resulting information about the intensity of the mutual relations might be useful for management of competitiveness and planning of strategic economic tools.

  14. Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

    Directory of Open Access Journals (Sweden)

    Yang Guan

    2014-07-01

    Full Text Available Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1 Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2 The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3 The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4 The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies.

  15. Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

    Science.gov (United States)

    Guan, Yang; Shao, Chaofeng; Ju, Meiting

    2014-01-01

    Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China) as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1) Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2) The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3) The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4) The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies. PMID:25032743

  16. Industrial Internet of Things: (IIoT) applications in underground coal mines.

    Science.gov (United States)

    Zhou, C; Damiano, N; Whisner, B; Reyes, M

    2017-12-01

    The Industrial Internet of Things (IIoT), a concept that combines sensor networks and control systems, has been employed in several industries to improve productivity and safety. U.S. National Institute for Occupational Safety and Health (NIOSH) researchers are investigating IIoT applications to identify the challenges of and potential solutions for transferring IIoT from other industries to the mining industry. Specifically, NIOSH has reviewed existing sensors and communications network systems used in U.S. underground coal mines to determine whether they are capable of supporting IIoT systems. The results show that about 40 percent of the installed post-accident communication systems as of 2014 require minimal or no modification to support IIoT applications. NIOSH researchers also developed an IIoT monitoring and control prototype system using low-cost microcontroller Wi-Fi boards to detect a door opening on a refuge alternative, activate fans located inside the Pittsburgh Experimental Mine and actuate an alarm beacon on the surface. The results of this feasibility study can be used to explore IIoT applications in underground coal mines based on existing communication and tracking infrastructure.

  17. Managerial Accounting Principles and Cost Calculation Used by Economic Entities in the Coal Mining Industry

    OpenAIRE

    Boca (Rakos) Ileana – Sorina; Vatasoiu Cristian Ionel

    2011-01-01

    Considering the specialized work in managerial accounting, this paper aims to show which cost calculation principles are actually applied in the coal mining industry today. The methodology used in this scientific approach is of qualitative nature, using the following methods: direct observation and interview.

  18. An index for drought induced financial risk in the mining industry

    Science.gov (United States)

    Bonnafous, L.; Lall, U.; Siegel, J.

    2017-02-01

    Water scarcity has emerged as a potential risk for mining operations. High capital spending for desalination and water conflicts leading to asset stranding have recently occurred. Investors in mining companies are interested in the exposure to such risks across portfolios of mining assets (whether the practical at-site consequences are foregone production, higher OPEX and CAPEX and ensuing lost revenues, or asset-stranding). In this paper, an index of the potential financial exposure of a portfolio is developed and its application is illustrated. Since the likely loss at each mine is hard to estimate a priori, one needs a proxy for potential loss. The index considers drought duration, severity and frequency (defined by a return-level in years) at each mining asset, and provides a measure of financial exposure through weighing of production or Net Asset Value. Changes in human needs are not considered, but are relevant, and could be incorporated if global data on mine and other water use were available at the appropriate resolution. Potential for contemporaneous drought incidence across sites in a portfolio is considered specifically. Through an appropriate choice of drought thresholds, an analyst can customize a scenario to assess potential losses in production value or profits, or whether conflicts could emerge that would lead to stranded assets or capital expenditure to secure alternate water supplies. Global climate data sets that allow a customized development of such an index are identified, and selected mining company portfolios are scored as to the risk associated with one publicly available drought index.

  19. CSR Disclosures in the Mining Industry: Empirical Evidence from Listed Mining Firms in Indonesia

    Directory of Open Access Journals (Sweden)

    Rina Asmeri

    2017-06-01

    Full Text Available Companies that are involved in CSR strive to meet the expectations of stakeholders. Therefore, CSR and CSR reporting are tools of legitimacy to demonstrate its obedience (legitimacy theory. This study aims to look at empirical evidence on the effect of profitability and environmental performance on CSR disclosure. This study examined the target population of mining companies listed on the Indonesian Stock Exchange that included the CSR reporting in the 2010-2014 annual report, obtained a sample of 18 companies. By using multiple regression analysis test, there is no significant influence between profitability to CSR disclosure, whilst environmental performance has effect on CSR disclosure.

  20. Landscape architects perception of their role in the mining industry ...

    African Journals Online (AJOL)

    Landscape architects have a broad based academic training that prepares them to undertake a variety of different challenges in planning, design, construction and management of land. The purpose of this study was to establish their perception regarding their role in the mineral extraction industry in England. The study ...

  1. TOWARD A DISTRIBUTED DATA MINING SYSTEM FOR TOURISM INDUSTRY

    Directory of Open Access Journals (Sweden)

    Socaciu Tiberiu

    2009-05-01

    Full Text Available Romania has a huge tourist’s potential, but currently it is too little valued and exploited. As a result, one of the strategic developments of the economy aimed the tourism industry. The strategic decisions are based on different trends obtained from soph

  2. Methods for decreasing dust emission in the mining chemistry industry

    Energy Technology Data Exchange (ETDEWEB)

    Gal' perin, V I

    1981-01-01

    Examination is made of the problems concerning the protection of the atmosphere from pollution caused by dust emission from phosphate enterprises. Presentation is made of the results of tests and industrial assimilation of devices, designed for an increase in the effectiveness of dust catching systems.

  3. The protection and compensation of workers employed in the uranium mining industry in Australia

    International Nuclear Information System (INIS)

    McNamara, P.

    1983-01-01

    The hazards associated with uranium mining are outlined. The extent to which the law has provided for the protection of Australian uranium mine and mill workers from avoidable injury is examined. The single most significant step taken towards adequate protection of workers from the dangers of excessive exposure to ionising radiation was the approval of the Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores (1980). The extent to which existing compensatory mechanisms, both common law and statutory, provide for the compensation of uranium mine and mill workers who sustain diseases peculiar to their employment is also examined. The capacity of the law to deal with cancers and other diseases of long latency periods is discussed

  4. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY; SEMIANNUAL

    International Nuclear Information System (INIS)

    Mark J. Rigali; Kenneth L. Knittel; Mike L. Fulcher

    2002-01-01

    During this reporting period, work continued on development of formulations using the materials identified as contenders for the fibrous monolith wear resistant components. The FM structures fabricated were: diamond/WC-Co, B(sub 4)C/WC-Co, TiB(sub 2)/WC-Co, WC-Co/Co, WC-Co/WC-Co. Results of our consolidation densification studies on these systems lead to the down-selection of WC-Co/WC-Co, WC-Co/Co and diamond/WC-Co for further development for mining applications including drill bit inserts, roof bit inserts, radial tools conical tools and wear plates (WC-Co based system only) for earth moving equipment. Prototype component fabrication focused on the fabrication of WC-Co/WC-Co FM conical tools, diamond/WC-Co coated drill bit insert prototypes. Fabrication of WC-Co/WC-Co FM insert prototypes for a grader blade is also underway. ACR plans to initiate field-testing of the drill bit insert prototypes and the grader blade insert this summer (2002). The first WC-Co/WC-Co FM conical tool prototypes were sent to Kennametal for evaluation towards the end of the current reporting period

  5. Hot particles in industrial waste and mining tailings

    CERN Document Server

    Selchau-Hansen, K; Freyer, K; Treutler, C; Enge, W

    1999-01-01

    Industrial waste was studied concerning its radioactive pollution. Using known properties of the solid state nuclear track detector CR-39 we found among a high concentration of more or less homogeneously distributed single alpha-tracks discrete spots of very high enrichments of alpha-particles created by so called hot particles. We will report about the alpha-activity, the concentration of hot particles and about their ability to be air borne.

  6. Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas

    Science.gov (United States)

    Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

    2015-01-01

    Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area. PMID:26580644

  7. Overview of the technological enhancement of natural radiation in the Brazilian non-uranium mining industry

    International Nuclear Information System (INIS)

    Fernandes, H.M.; Pires do Rio, M.A.; Rosa, R.; Veiga, L.H.S.; Amaral, E.C.S.

    2002-01-01

    The mining and milling of ores with significant amounts of uranium and thorium associated to the main ore has the potential to pose undue health risks to members of the general public and workers. In order to assess the status of this problem in the Brazilian non-uranium mining industries a comprehensive investigation project has been undertaken. The adopted methodology was based on the detailed analysis of each investigated industry operational flowplan, mass balance calculations, risk assessment (operational and post-operational scenarios taken into account) and environmental management principles. This papers addresses the main issues arising from the investigation effort, reports the most relevant conclusions and states the future studies to be implemented. It could be observed that these industries have the potential to cause relevant radiological impacts and must be regulated/controlled as to avoid these problems. (author)

  8. Investment in the Community coal mining and iron and steel industries - 1981 survey

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The report has been prepared on the results of the 1981 survey of investments in the Community coal and steel industries. The survey which is conducted annually collects information on actual and forecast capital expenditure and production potential of coal and steel enterprises. The introductory chapter summarizes the results of the survey and the conclusions on them. Subsequent chapters examine in detail the results of the survey for each producing sector, namely: the coal mining industry; coking plants; briquetting plants; iron ore mines; and iron and steel industry. The annex contains a statement of the definitions under which the survey was carried out, together with tables giving a complete analysis of the results of the survey, including tables of capital expenditure and production potential by region and by category of plant for all sectors and categories of coal and steel products falling within the ECSC treaty. Editions are available in the seven community languages.

  9. Investment in the Community coal mining and iron and steel industries - 1980 survey

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The report has been prepared on the results of the 1980 survey of investments in the Community coal and steel industries. The survey, which is conducted annually, collects information on actual and forecast capital expenditure and production potential of coal and steel enterprises. The introductory chapter summarizes the results of the survey and the conclusions on them. Subsequent chapters of the report examine in detail the results of the survey for each producing sector, namely: the coal mining industry; coking plants; briquetting plants; iron-ore mines; and the iron and steel industry. The annex to the report contains a statement of the definitions under which the survey was carried out, together with tables giving a complete analysis of the results of the survey, including tables of capital expenditure and production potential by region and by category of plant for all sectors and categories of coal and steel products falling within the ECSC Treaty. Editions are available in six community languages.

  10. Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas.

    Science.gov (United States)

    Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

    2015-11-13

    Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area.

  11. Adopted practices for mined land reclamation in Ghana: a case ...

    African Journals Online (AJOL)

    Although mining is an economic booster, its negative ecological backlashes have become a great concern to environmental experts, development planners and policy makers in the era of increasing environment and sustainable development concerns. Reclamation of derelict mine sites is necessary for restoration of ...

  12. Ground truth data collection on mining industrial explosions registered by the International Monitoring System

    International Nuclear Information System (INIS)

    Ehl'tekov, A.Yu.; Gordon, V.P.; Firsov, V.A.; Chervyakov, V.B.

    2004-01-01

    The presentation is dedicated to organizational and technical issues connected with the task of Comprehensive Test-Ban-Treaty Organization timely notification on large chemical explosions including data on explosion location and time, on applied explosive substance quantity and type, and also on configuration and assumed purpose of explosion. Explosions registered by International Monitoring System are of special interest. Their data could be used for calibration of the monitoring system. Ground truth data collection and some explosions location results on Russia's mining enterprises were given. Ground truth data collection peculiarities according to mining industrial explosions were considered. (author)

  13. Behaviour of U-Isotopes in an Estuary Affected by Acid Mine Drainage and Industrial Releases

    International Nuclear Information System (INIS)

    Hierro, A.; Bolivar, J.P.; Vaca, F.

    2011-01-01

    Tinto and Odiel rivers (SW of Spain) is an ecosystem of great interest that is seriously affected by acid mine drainage (AMD) from long-term mining activities (pH < 3). Additionally, a large industrial complex is located in the surroundings of this estuary and Huelva town, which includes two phosphate rock processing plants that produce about 3 millions of tons per year of a byproduct called phosphogypsum (PG) containing high U-series radionuclides concentrations. For these reasons, the estuary of Huelva is one of the most heavy metals and radionuclides polluted estuarine systems in Europe with extremely low pH.

  14. Mechatronics in the mining industrie. With (development) method towards success; Mechatronik im Bergbau. Mit (Entwicklungs-) Methode zum Erfolg

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, Thorsten; Bruckmann, Tobias [Mercatronics GmbH, Duisburg (Germany)

    2009-10-01

    Germany is a high-wage country. Hence the internationally competitive extraction of raw materials in Germany can only be ensured by highly efficient working processes. Tackling the associated extreme requirements on road-driving, coal winning and transport equipment has resulted in the German mining industry and its suppliers achieving the role of an international leader in technology. To safeguard this position also in the future the successful mechanisation will now be followed by the mechatronisation in the mining industry. Efficiency will be increased by (partial) automation and assistance systems. This contribution is a first step towards a series of articles, which explain the principles of mechatronic development methods in the mining industry and will make the development engineers in the mines aware of the high potential of mechatronics in the mining industry. (orig.)

  15. Best practices for effective partnerships with Aboriginal groups : lessons learned from major Canadian projects in mining and forestry

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, C. [Labrador Inuit Association, NF (Canada)

    2004-07-01

    This PowerPoint presentation provided an update on effective partnerships and best practices reported in Canadian mining, forestry and energy projects. The forestry and mining industries have provided most of the models and best practices for natural resource projects. This presentation described the approach to negotiations for the Voisey's Bay Nickel Project and future steps for commercial success. The lessons learned were also discussed with particular reference to corporate agendas that help advance Aboriginal participation. The presentation outlined the expected results from Voisey's Bay Nickel Company Impact Benefit Agreement with the Labrador Inuit Association and the Innu Nation. The issue of responsible environmental management was also discussed along with long-term opportunities for jobs, education and business opportunities for Newfoundland and Labrador residents. figs.

  16. A case study of GAMM (graphical analysis for maintenance management) in the mining industry

    International Nuclear Information System (INIS)

    Barberá, Luis; Crespo, Adolfo; Viveros, Pablo; Stegmaier, Raúl

    2014-01-01

    This paper presents a case for practical application of the GAMM method, which has been developed and published by the authors (Barberá L., Crespo A. and Viveros P.) The GAMM method supports decision-making in the overall maintenance management, through the visualization and graphical analysis of data. In addition, it allows for the identification of anomalous behavior in the equipment analyzed, whether derived from its own operations, maintenance activities, improper use of equipment or even as a result of design errors in the equipment itself. As a basis for analysis, the GAMM method uses a nonparametric estimator of the reliability function using all historical data or, alternatively, part of the history, allowing it to perform an analysis even with limited available data. In the case study developed, GAMM has been used to analyze two slurry pumps in a mining plant located in Chile. Both pumps are part of the same industrial process, which is described in Section 3, and both pumps had a higher failure rate but one more than the other. GAMM identified deficiencies in each of the pumps being studied, thus improving decision-making and problem solving process related to the maintenance of the pumps. Particularly, this work initially provides a description of the GAMM method (Section 1), and, afterwards, it is depicted with special attention the approach to the problem (Section 2). In Section 3, a background of the industrial context is presented. Then, Section 4 shows step by step the application of GAMM method. Finally, results and conclusions are presented in Section 5 where the main improvements obtained are summarized

  17. The mining sector of Liberia: current practices and environmental challenges.

    Science.gov (United States)

    Wilson, Samuel T K; Wang, Hongtao; Kabenge, Martin; Qi, Xuejiao

    2017-08-01

    Liberia is endowed with an impressive stock of mineral reserves and has traditionally relied on mining, namely iron ore, gold, and diamonds, as a major source of income. The recent growth in the mining sector has the potential to contribute significantly to employment, income generation, and infrastructure development. However, the development of these mineral resources has significant environmental impacts that often go unnoticed. This paper presents an overview of the Liberian mining sector from historical, current development, and economic perspectives. The efforts made by government to address issues of environmental management and sustainable development expressed in national and international frameworks, as well as some of the environmental challenges in the mining sector are analyzed. A case study was conducted on one of the iron ore mines (China Union Bong Mines Investment) to analyze the effects of the water quality on the local water environment. The results show that the analyzed water sample concentrations were all above the WHO and Liberia water standard Class I guidelines for drinking water. Finally the paper examines the application of water footprint from a life cycle perspective in the Liberian mining sector and suggests some policy options for water resources management.

  18. Measuring the relative performance in mining industry: A case study of cooperative Seif mining company

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Lotfi

    2013-09-01

    Full Text Available In this paper, we present an empirical study to measure the performance of a salt refinery named Seif cooperative mining. The study uses Political–Economical-Social– Technological Analysis (PEST technique to evaluate opportunities and threats associated with external as well as internal factors influencing the firm. The study designs a questionnaire in Liket scale and asks decision maker to evaluate internal/external threats. In terms of external factors, there are four opportunities and ten threats associated with External factor evaluation (EFE factors. In terms of opportunities, existing potential for export has received the highest priority followed by easy access to national transportation and government support. On the threats part, firm’s dependency on importing necessary parts, global price reduction and mineral reserve termination in near future are the most important issues. In addition, in terms of internal factors, on the opportunity part, access to necessary utilities is considered as the most important factor followed by availability of high level lab equipment and sufficient assets and equities. On the threats, depreciation is considered as the most important issue followed by lack of optimum utilization of equipment and lack of enterprise resource planning. In addition, the study uses balanced score card (BSC technique to look at the performance of the firm in terms of learning and growth, internal process, customer and financials. The study determines the present and ideal status of the firm.

  19. Mining industry enters a new era of AIDS prevention. Eye witness: South Africa.

    Science.gov (United States)

    Heywood, M

    1996-06-01

    Miners in South Africa are now more at risk of contracting human immunodeficiency virus (HIV) than of being in a mining accident. Some epidemiologists predict that the mines could be experiencing 12,000-40,000 deaths related to acquired immunodeficiency syndrome (AIDS) by 2010. In 1986, HIV infection among mineworkers was 1/3500. Gencor medical personnel now estimate that 20% of the company's employees are HIV-positive and that 30 workers are dying of AIDS each month. In August 1995, the Chamber of Mines, the World Bank, and the World Health Organization (WHO) held a seminar to discuss the potential impact of the epidemic; it was followed by a workshop, "Research Needs and Priorities for the Management of HIV/AIDS Transmission in the Mining Industry," which was organized by the Epidemiology Unit in Johannesburg. Although the seminar invited no people with HIV, mineworkers, or government representatives, the workshop did; however, no representatives of the National Union of Mineworkers (NUM), or the Chamber of Mines, came. In spite of this, a new, holistic approach to HIV-prevention is emerging in the mining sector. A decade of education has not changed risk behaviors, so more emphasis will be placed on outreach programs to the communities, including the prostitutes, with which the miners interact, and on treatment of sexually transmitted diseases (STDs). The mining sector is in a unique position to fight HIV because it already has an extensive medical infrastructure with the capacity to treat STDs effectively, a unionized workforce to provide a pool of peer educators, and recruitment agencies to extend HIV-prevention into rural areas. Obstacles to effective HIV/AIDS education include discrimination (Workers are tested for HIV without consent, and dismissed, if found to be positive, regardless of union agreements.); a psychological factor that is related to underground work and produces recklessness; poor living conditions; and illiteracy. Many myths remain about

  20. Radon in uranium mining industry and application of SSNTD in monitoring and dose evaluation

    International Nuclear Information System (INIS)

    Khan, A.H.

    2006-01-01

    Radon is present everywhere and accounts for a globally major share of natural radiation exposure of the population. Though it is present in most of the underground workings it is a source of concern in uranium mining and ore processing industry as well as in many other operations carried out in confined spaces below the ground, like railway tunnels and non-uranium underground mines. Many monitoring techniques are available for evaluation of radon and its short-lived progeny concentrations. Scintillation cell techniques, also called Lucas cell, is one of the earliest developed methods of radon monitoring still widely used in mines where appreciable concentrations of radon above about 40-50 Bq.m -3 are expected. For low concentration of radon as observed in the atmosphere, dwellings and other workplaces, the radon absorption in charcoal followed by gamma counting, two filter method and electrostatic techniques are available. Solid state nuclear track detectors (SSNTD) are now widely used for a variety of situations for monitoring of low level of radon over an extended period of time. It is now extensively used in radon monitoring in dwellings and also in radon dosimetry in mines. Radon daughters being the more important contributors to the internal radiation exposure are also being monitored using conventional techniques as well as SSNTD. Various monitoring techniques for radon and its progeny and the concentrations observed at different stages of uranium mining, ore processing and tailings management are discussed in this presentation. (author)

  1. The mining industry and the community: Joining forces for sustainable social development

    International Nuclear Information System (INIS)

    Labonne, B.

    1999-01-01

    This article joins the continuing policy debate over the social responsibility of corporations, particularly in the mining industry. The author argues that the 'old school mining orthodoxy' - approaching the exploitation of mineral deposits solely from the technical and economic points of view-is long dead. Mining companies must also encompass the social dimension. New policies for the mining industry are discussed in terms of recent worldwide trends and movements, e.g. globalization, economic interdependence and decentralization of governmental authority, and the rise of civil society as a political factor. These trends, together with the United Nations policies in quest of sustainable development and the consensus expressed at international conferences during the last decade, have deepened social awareness and set the stage for enhanced social responsiveness from the private sector. Socially responsible corporate policies include decentralization of decision-making to the field level, reaching out to stake holders and shareholders, supporting governments which provide official development assistance for good governance and building broad partnerships to reduce social exposures. (author)

  2. Mastering Foreign Language Competence of Ecology and Environment Managers for Mining Industry of Kuzbass

    Science.gov (United States)

    Greenwald, Oksana; Islamov, Roman; Sergeychick, Tatyana

    2017-11-01

    The necessity to solve nature conservation problems of Kuzbass mining industry demands from postgraduate education institutions to train highly qualified specialists in ecology and environment management. As 21st century education is competence-based one, the article clarifies the concept of competence in education, focuses on key competences, namely foreign language competence and its relevance for specialists in ecology and environment management. Foreign language competence is acquired through the course of "Foreign Language" discipline which covers the following aspects: academic reading, academic writing and public speaking. The article also describes the experience of organizing students' individual work taking into account their motivation and specific conditions of the discipline as well. Thus, both the content of the discipline and the approach to organize students' learning contribute to mastering foreign language competence of ecology and environment managers as inherent condition of their professional efficiency for solving ecological problems of mining industry in Kuzbass region.

  3. 'Heat Market Campaign' of the German coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Dach, G.

    1983-12-22

    The ''Heat Market Campaign'', presented in June '83 by experts of all fields of coal mining, investigates the possibilities of coal sales promotion. The article reviews the main data of the heat market and discusses the ''Heat Market Campaign'' under the aspects of coal policy and energy policy. The campaign was started with the objectives of energy supply assurance in the Federal Republic of Germany, energy cost reduction on the consumer side, and stabilisation and development of coal markets not affected by the steel crisis. Sales goald on the household, trade and industrial sector are quantified, and obstacles preventing further expansion of the heat market are discussed. Apart from the mining industry's marketing concept for the heat market, there is also the possibility of receiving financial aid by the Federal government.

  4. Job Burnout and Job Satisfaction among Industry, Mine and Trade Organization Employees: A Questionnaire Survey

    OpenAIRE

    Rahil Kazemi Talachi; Mohammad Bagher Gorji

    2013-01-01

    One of the most important challenges facing organizations is the increasing levels of job burnout among their employees. In the meantime, it poses the question as what the relationship between this factor and job satisfaction is. The aim of this study was to investigate the relationship between burnout and job satisfaction to provide an appropriate model. The population of this study consisted of all employees of Golestan Province industry, mine and trade organization, the number of whom is 1...

  5. Monitoring and evaluation of sustained clinical performance and tuberculosis management in the South African mining industry

    CSIR Research Space (South Africa)

    Murray, J

    2004-03-01

    Full Text Available Advisory Committee Project Summary : SIM 02-08-02 Project Title: MONITORING AND EVALUATION OF SUSTAINED CLINICAL PERFORMANCE AND TUBERCULOSIS MANAGEMENT IN THE SA MINING INDUSTRY (22 pages) Author(s): Dr Jill Murray Dr Michelle Wong...-orientated data analyses. It was then possible to quantify the high proportion of pulmonary tuberculosis in miners that appeared to be undiagnosed during life (˜ 60%). SIMRAC Health 611 clearly demonstrated that significant problems exist with regard...

  6. Responding to non-technical challenges in the uranium mining industry

    International Nuclear Information System (INIS)

    Shpyth, A.

    1997-01-01

    The modern uranium mining industry in Saskatchewan has been working with northerners, governments, and educational institutions for nearly 20 years to bring about one of the highest levels of northern and aboriginal participation in an industrial sector in Canada. It has accomplished this in the face of challenges - those arising from the demographics of the north, continuously rising expectations, and the at times difficult demands from evolving aboriginal political institutions. Every second apprenticeship vacancy at Key Lake is to be awarded to an employee of aboriginal ancestry. Saskatchewan dominates uranium mining because of the high grade of its deposits. Even though Key Lake, Rabbit Lake and Cluff Lake are coming near the end of their lives, they will be replaced by: McArthur River (with average grade 15% U 3 O 8 ), Cigar Lake (9%), McClean Lake (3.5), Midwest (4.5). Without doubt, the grade and size of these new deposits will contribute to the competitiveness of the Saskatchewan uranium mining industry; but so too will the workforce

  7. Niger Republic, mineral planning (part one)-Mining industries in socio-political and national economy framework

    International Nuclear Information System (INIS)

    Joo, Julien

    1982-01-01

    This document focus on Niger Republic mineral industries related points that are: socio-political and economical context; specific characters such as administrative, juridical and fiscal environment; citizens employment and training; actual situation and energy projects; transport; existing mining companies, construction materials enterprises and projects presentation; effect of mining sector and construction material on national economy and prior major problems to be solved [fr

  8. R&D status and the performance of domestic firms in China's coal mining industry

    International Nuclear Information System (INIS)

    Sun, Sizhong; Anwar, Sajid

    2015-01-01

    Coal use accounts for a very large proportion of electricity production in China. Using a recently developed coarsened exact matching (CEM) technique, this paper examines the impact of research and development (R&D) activities on the performance of firms in China's coal mining industry. Our empirical results reveal that firms in China's coal industry that conduct R&D are more productive and their sales are higher. However, as far as the firm profitability and market shares are concerned, whether or not a firm in China's coal industry conducts R&D makes no difference. We find that foreign direct investment in China's coal mining industry leads to a significant decrease in the market share of domestic firms and its impact on productivity, sales and profitability of domestic firms is insignificant. The empirical results presented in this paper suggest that policies that encourage domestic firms in China's coal mining industries to conduct R&D can increase domestic production thereby reducing reliance on imports. Furthermore, productivity gains arising from R&D activities can also help Chinese mining firms to improve their competitive position in the international market. However, there is a need for restricting foreign direct investment in China's coal mining industry. - Highlights: • R&D status affects firm performance in China's coal mining industry. • Coal mining firms that conduct R&D are, on average, 0.2717% more productive. • Coal mining firms that conduct R&D experience an increase in sales. • Increase in foreign investment decreases the market share of coal mining firms

  9. Blood biomonitoring of metals in subjects living near abandoned mining and active industrial areas.

    Science.gov (United States)

    Madeddu, Roberto; Tolu, Paola; Asara, Yolande; Farace, Cristiano; Forte, Giovanni; Bocca, Beatrice

    2013-07-01

    A human blood biomonitoring campaign to detect the environmental exposure to metals (Cd, Cu, Cr, Mn, Pb and Zn) in 265 subjects was performed in the South-Western part of Sardinia (an Italian island) that is a particular area with a great history of coal and metal mining (Pb/Zn mainly) activities and large industrial structures (as metallurgy). Subjects living near the industrial plant area had geometric means (GM) of blood Cd (0.79 μg/l), Cu (971 μg/l), Mn (12.2 μg/l), and Pb (55.7 μg/l) significantly higher than controls (Cd, 0.47 μg/l; Cu, 900 μg/l; Mn 9.98 μg/l; Pb, 26.5 μg/l) and than people living nearby the past mining sites. Subjects living next to one dismissed mine were statistically higher in blood Cu (GM, 1,022 μg/l) and Pb (GM, 41.4 μg/l) concentrations than controls. No differences were observed in people living in the different mining sites, and this might be related to the decennial disclosure of mines and the adoption of environmental remediation programmes. Some interindividual variables influenced blood biomonitoring data, as smoke and age for Cd, gender for Cu, age, sex and alcohol for Pb, and age for Zn. Moreover, blood metal levels of the whole population were similar to reference values representative of the Sardinian population and acceptably safe according to currently available health guidelines.

  10. Resource inventory for fostering industrial symbiosis practices

    NARCIS (Netherlands)

    Fraccascia, Luca; van Capelleveen, Guido Cornelis; Yazdanpanah, Vahid; Yazan, Devrim Murat; Mancuso, Erika; Fantin, Valentina

    2017-01-01

    In this paper, we investigate the potential environmental benefits obtainable in Industrial Symbiotic Networks (ISNs) in case firms stock wastes when the demand is lower than supply. We design multiagent-based simulations to model the spontaneous emergence and operations of ISNs over time where

  11. Evaluation of water resources around Barapukuria coal mine industrial area, Dinajpur, Bangladesh

    Science.gov (United States)

    Howladar, M. Farhad; Deb, Pulok Kanti; Muzemder, A. T. M. Shahidul Huqe; Ahmed, Mushfique

    2014-09-01

    Water is a very important natural resource which can be utilized in renewable or non-renewable forms but before utilizing, the evaluation of the quality of this resource is crucial for a particular use. However, the problems of water quality are more severe in areas where the mining and mineral processes' industries are present. In mining processes, several classes of wastes are produced which may turn into ultimately the sources of water quality and environmental degradation. In consequences, the evaluations of water quality for livestock, drinking, irrigation purposes and environmental implications have been carried out around the Barapukuria Coal Mining Industry under different methods and techniques such as primarily the field investigation; secondly the laboratory chemical analysis and thirdly justified the suitability of the laboratory analysis with statistical representation and correlation matrix, Schoeller plot, Piper's Trilinear diagram, Expanded Durov diagram, Wilcox diagram, US salinity diagram, Doneen's chart and others. The results of all surface and ground water samples analysis show that the characteristics and concentrations of all the major physical and chemical parameters such as pH, EC, TDS, Na+, K+, Ca2+, Mg2+, Fetotal, Cl-, HCO3 -, CO3 2- and SO4 2- are varied from one sample to other but well analogous with the WHO and EQS standard limit for all purposes in the area where the abundance of the major ions is as follows: Ca2+ > Na+ > Mg2+ > K+ > Fetotal = HCO3 - > SO4 2- > Cl- > CO3 2-. The graphical exposition of analytical data demonstrates two major hydrochemical facies for example: calcium-bicarbonate (Ca2+- HCO3 -) and magnesium-bicarbonate (Mg2+- HCO3 -) type facies which directly support the shallow recently recharged alkaline water around the industry. The calculated values for the evaluation classification of water based on TDS, Na%, EC, SAR, PI, RSC, MH, and TH replicate good to excellent use of water for livestock, drinking and

  12. Industrial Practice in Formal Methods : A Review

    DEFF Research Database (Denmark)

    Bicarregui, Juan C.; Fitzgerald, John; Larsen, Peter Gorm

    2009-01-01

    We examine the the industrial application of formal methods using data gathered in a review of 62 projects taking place over the last 25 years. The review suggests that formal methods are being applied in a wide range of application domains, with increasingly strong tool support. Significant chal...... challenges remain in providing usable tools that can be integrated into established development processes; in education and training; in taking formal methods from first use to second use, and in gathering and evidence to support informed selection of methods and tools.......We examine the the industrial application of formal methods using data gathered in a review of 62 projects taking place over the last 25 years. The review suggests that formal methods are being applied in a wide range of application domains, with increasingly strong tool support. Significant...

  13. Industrial Pricing: Theory and Managerial Practice

    OpenAIRE

    Peter M. Noble; Thomas S. Gruca

    1999-01-01

    We organize the existing theoretical pricing research into a new two-level framework for industrial goods pricing. The first level consists of four pricing situations: New Product, Competitive, Product Line, and Cost-based. The second level consists of the pricing strategies appropriate for a given situation. For example, within the new product pricing situation, there are three alternative pricing strategies: Skim, Penetration, and Experience Curve pricing. There are a total of ten pricing s...

  14. Ambient air quality at the wider area of an industrial mining facility at Stratoni, Chalkidiki, Greece.

    Science.gov (United States)

    Gaidajis, Georgios; Angelakoglou, Komninos; Gazea, Emmy

    2012-01-01

    To assess ambient air quality at the wider area of a mining-industrial facility in Chalkidiki, Greece, the particulate matter with an aerodynamic diameter of 10 μm (PM(10)) and its content in characteristic elements, i.e., As, Cd, Cu, Fe, Mn, Pb, Zn were monitored for a period of three years (2008-2010). Gravimetric air samplers were employed for the particulate matter sampling at three sampling stations located in the immediate vicinity of the industrial facility and at a neighbouring residential site. Monitoring data indicated that the 3-year median PM(10) concentrations were 23.3 μg/m(3) at the residential site close to the facility and 28.7 μg/m(3) at the site within the facility indicating a minimal influence from the industrial activities to the air quality of the neighbouring residential area. Both annual average and median PM(10) concentration levels were below the indicative European standards, whereas similar spatial and temporal variation was observed for the PM(10) constituents. The average Pb concentrations measured for the three sampling sites were 0.2, 0.146 and 0.174 μg/m(3) respectively, well below the indicative limit of 0.5 μg/m(3). The quantitative and qualitative comparison of PM(10) concentrations and its elemental constituent for the three sampling stations did not indicate any direct influence of the mining-industrial activities to the air quality of the Stratoni residential area.

  15. Structural change of the mining components supplying industry, and innovative employment and qualification policies. A special study prepared on behalf of IKS. Final report

    International Nuclear Information System (INIS)

    Weber, B.

    1992-01-01

    The potentials and deficiencies of the mining components supplying industry are assessed by means of an industry study. Development prospects are derived for the mining sector. While individual solutions are neglected, methods which support the mining companies' efforts at diversifying and at opening up new markets are discussed placing emphasis on a sociocompatible implementation of the inevitable structural change and on the maintenance of a qualified industrial basis in communities dominated by the mining components supplying industry. The possibilities of cooperation between the companies are discussed, and conceivable future prospects are derived for the mining sector. (HS) [de

  16. Environmental Activity of Mining Industry Leaders in Poland in Line with the Principles of Sustainable Development

    Directory of Open Access Journals (Sweden)

    Justyna Woźniak

    2017-11-01

    Full Text Available As mining companies reveal more and more public information about themselves, the behaviour fosters a better image. This article aims to present two industry leaders in the context of environmental requirements they have met (status at the end of 2015, acting in compliance with the general principles of a socially responsible business. The choice of KGHM (Kombinat Gorniczo-Hutniczy Miedzi companies (copper ores and other accompanying elements CG PGE (Capital Group Polska Grupa Energetyczna S.A. (lignite was dictated by their significant share in the mining industry in Poland. The environmental aspects of the integrated monthly reports were listed and grouped in detail in accordance with the applicable Global Reporting Initiative (GRI and GRI G4 Mining and Metals guidelines. The values of environmental indicators have been analysed over the years, including inter alia data concerning gas emissions, that is, CO2, SOx, NOx, PM or generated waste and sewage. Also, with regard to the environmental aspect of the work, energy consumption in companies is presented together with the characteristics of the fuel balance. The final part of the article compares the value of the revenues to the budgets of local government units (communes from the operating fee paid by entrepreneurs and expenditures of these municipalities on environmental protection, as additional support by these entities (2013–2015.

  17. The South African coal mining industry: A need for a more efficient and collaborative supply chain

    Directory of Open Access Journals (Sweden)

    David Pooe

    2011-11-01

    Full Text Available It is estimated that about two-thirds of global coal is used for power generation and that, in the next 20 years, over 70% of the demand for coal will come from China and India. Coal accounts for approximately 41% of the world's electricity generation. Demand for thermal coal is influenced by factors that include availability, prices of competing products such as oil, gas and nuclear power, and the demand for electricity. The aim of this article is to provide an exposition of supply chain dynamics within the South African coal mining industry and to argue for a more efficient and collaborative supply chain. The authors attempt to investigate at local and global level, the current trends pertaining to the level of reserves, production and consumption of coal. The article further demonstrates the shortcomings of current logistics in meeting the demand for coal in both domestic and export markets. The article draws from secondary data sourced from academic papers, government and agency documents in the exposition of the coal mining supply chain. The paper concludes by recommending the need for a scientific study on supply chain constraints facing the coal mining industry in South Africa.

  18. Study of application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.

    1973-01-01

    The author has identified the following significant results. The utility of ERTS-1/high altitude aircraft imagery to detect underground mine hazards is strongly suggested. A 1:250,000 scale mined lands map of the Vincennes Quadrangle, Indiana has been prepared. This map is a prototype for a national mined lands inventory and will be distributed to State and Federal offices.

  19. Practical difficulties in determining 222Rn flux density in underground uranium mines

    International Nuclear Information System (INIS)

    Bigu, J.

    1991-01-01

    Radon-222 flux density, J, has been determined in a number of locations in an underground U mine. Measurements were conducted using the Two-Point Measurement (2PM) method, consisting of measuring the 222Rn concentration at two different points a distance apart within a given section of the mine. Several mine models were used for determining J by the above method. The 2PM method is sensitive to sources and sinks of 222Rn other than mine walls, as well as mining operations and mining activities of a diverse nature, and to local variations in airflow conditions. Because of this, J obtained by the 2PM method represents an 'apparent' flux density. Significant differences were found in the flux density calculated according to different mine models. In addition, J measurements using the flux 'can' method were also carried out in mine walls and compared with the values obtained by the 2PM method. Wide discrepancies between the two methods were found. The practical and theoretical difficulties in determining J are discussed

  20. Accounting practice diversity in the healthcare industry.

    Science.gov (United States)

    Robbins, W A; Turpin, R

    1993-05-01

    A recent study examining accounting practices currently being used to prepare annual hospital financial statements indicates relatively little diversity, regardless of organizational type or size. The study's findings should interest those concerned with healthcare accounting and financial reporting issues, especially healthcare administrators and members of standards setting boards who participate in accounting policy deliberations.

  1. A practicable signal processing algorithm for industrial nuclear instrument

    International Nuclear Information System (INIS)

    Tang Yaogeng; Gao Song; Yang Wujiao

    2006-01-01

    In order to reduce the statistical error and to improve dynamic performances of the industrial nuclear instrument, a practicable method of nuclear measurement signal processing is developed according to industrial nuclear measurement features. The algorithm designed is implemented with a single-chip microcomputer. The results of application in (radiation level gauge has proved the effectiveness of this method). (authors)

  2. Aspects of radiation safety in the tin mining and processing industries in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Giles, M S

    1987-04-01

    This study was undertaken at the request of the Malaysian nuclear regulatory authorities with the following objectives: to examine the individual steps in the mining, beneficiation, by-product treatment and smelting of tin-bearing minerals so as to highlight possible radiation safety effects and radiological environmental impacts; to make preliminary measurements on operations which are representative of the various steps in the processing of these minerals so as to determine the type and extent of future radiological survey programs; to examine the need for specific measurement techniques with a view to determining future training requirements. A representative operation of each of the steps in the tin mining and processing industry was visited, measurements were made and samples were collected to assess both the in-plant safety and offsite environmental effects of the operation. The results of measurements of gamma dose-rates, radon daughters-in-air, thoron daughters-in-air and radioactive respirable dusts are presented.

  3. AN ANALYSIS OF MAINTENANCE PERFORMANCE SYSTEMS IN THE SOUTH AFRICAN MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Kotze, R. L. M.

    2012-11-01

    Full Text Available The measurement of performance is an essential part of the management process. The planning function usually defines the goals and objectives for the business enterprise or division of the enterprise. The control function should monitor the performance measures and establish corrective action if actual performance deviates significantly from planned performance. Maintenance performance measurement is therefore essential to ensure that maintenance objectives are achieved, and that maintenance adds value for the company. The objective of this paper is to discuss the findings of a project that investigated aspects of the maintenance performance system of a number of mining companies in South Africa. The findings of a survey indicated that maintenance performance management is not yet used to its full potential in the mining industry.

  4. Estimating the continuous risk of accidents occuring in the mining industry in South Africa

    Directory of Open Access Journals (Sweden)

    Van den Honert, Andrew Francis

    2015-11-01

    Full Text Available This study contributes to the on-going efforts to improve occupational safety in the mining industry by creating a model capable of predicting the continuous risk of occupational accidents occurring. Contributing factors were identified and their sensitivity quantified. The approach included using an Artificial Neural Network (ANN to identify patterns between the input attributes and to predict the continuous risk of accidents occurring. The predictive Artificial Neural Network (ANN model used in this research was created, trained, and validated in the form of a case study with data from a platinum mine near Rustenburg in South Africa. This resulted in meaningful correlation between the predicted continuous risk and actual accidents.

  5. Practical use of ergonomics in industrial processes

    International Nuclear Information System (INIS)

    1976-01-01

    Six lectures deal with new developments in the application of ergonomic knowledge, in particular to nuclear technology. All contributions have in common the aspects of analysis and structure of man-machine-systems in which human operators have to process information and have to make decisions. Quoting a lot of examples from a variety of industrial sectors, the article discusses complexes of problems and ways of solving them concerning questions requiring the answer 'yes' or 'no', concerning the dialogue man-computer, the organization of central control mechanisms, the avoidance of human errors, influence of man on system safety, and the rational incorporation of ergonomics in system planning. This publication is meant to be a contribution to extend the knowledge on the organization of work from an ergonomic and engineer/psychological point of view. It is to show how the knowledge of the nature of man can be applied as a systems component in order to make industrial processes safer and more economical, and to entrust man with purposeful and satisfying tasks. (orig./LN) [de

  6. Soil contamination from urban and industrial activity: example of the mining district of Linares (southern Spain)

    Science.gov (United States)

    Martínez, J.; Llamas, J. F.; de Miguel, E.; Rey, J.; Hidalgo, M. C.

    2008-04-01

    The Linares region (southern Spain) has been subjected to two important sources of pollution: the intensive mining works and the urban-industrial activity. To obtain a geochemical characterisation of the soil, 31 trace elements were analysed and 669 soil samples were collected. By means of clustering analysis, we identified groups of elements and grid squares in which relations could be established concerning soil lithology, urban and industrial activities and the degree of pollution impact; in addition, we were able to characterise the geochemical background of the study area. The multivariate study led us to identify four factors. Particularly important was factor 2, which represented the elements associated with mineral paragenesis (Cu, Pb, As, Co, Mn, Zn, Sn, Ba). This factor also contains elements related with an urban-industrial activity, such as Pb, Cu, Zn, As and Ba. Furthermore, we identified factor 4, associating Ni, V and Cr, and which is related to the use of fuels.

  7. Mining

    Directory of Open Access Journals (Sweden)

    Khairullah Khan

    2014-09-01

    Full Text Available Opinion mining is an interesting area of research because of its applications in various fields. Collecting opinions of people about products and about social and political events and problems through the Web is becoming increasingly popular every day. The opinions of users are helpful for the public and for stakeholders when making certain decisions. Opinion mining is a way to retrieve information through search engines, Web blogs and social networks. Because of the huge number of reviews in the form of unstructured text, it is impossible to summarize the information manually. Accordingly, efficient computational methods are needed for mining and summarizing the reviews from corpuses and Web documents. This study presents a systematic literature survey regarding the computational techniques, models and algorithms for mining opinion components from unstructured reviews.

  8. Legacies of the uranium ore mining industry and their restoration. A survey of Africa, Asia and Australia

    International Nuclear Information System (INIS)

    Waggitt, P.

    2008-01-01

    Management of the environment in the uranium mining industry has an eventful history of more than 50 years. In addition to examples of successful restoration of mining and preparation sites in some countries there are also numerous cases, in which no or defective restoration left behind serious waste deposits. In the course of the renaissance of the uranium industry there is increasing interest in the rehabilitation of such waste sites. There is still an urgent requirement to eradicate the environmental effects of the old mining industry. Previous deposits could be of interest for renewed working under the present economic boundary conditions. Restoration as an integral part of the current and future uranium mining industry with the application of modern international safety standards is extremely important. The contribution provides a survey of restoration projects of the old mining industry in various parts of the world and shows how the International Atomic Energy Agency, the national supervisory and approval authorities as well as the mining companies collaborate closely at many sites on solution of the difficult problems. (orig.)

  9. Physiological strain in the Hungarian mining industry: The impact of physical and psychological factors.

    Science.gov (United States)

    Varga, József; Nagy, Imre; Szirtes, László; Pórszász, János

    2016-01-01

    The objectives of these investigations completed on workplaces in the Hungarian mining industry were to characterize the physiological strain of workers by means of work pulse and to examine the effects of work-related psychological factors. Continuous heart rate (HR) recording was completed on 71 miners over a total of 794 shifts between 1987 and 1992 in mining plants of the Hungarian mining industry using a 6-channel recorder - Bioport (ZAK, Germany). The work processes were simultaneously documented by video recording along with drawing up the traditional ergonomic workday schedule. All workers passed health evaluation for fitness for work. The effects of different psychological factors (simulated danger, "instrument stress," presence of managers, and effect of prior involvement in accidents as well as different mining technologies and work place illumination) on the work pulse were evaluated. The statistical analysis was completed using SPSS software (version 13.0, SPSS Inc., USA). The work-related physiological strain differed between work places with different mining technologies in groups of 12-18 workers. The work pulse was lowest in bauxite mining (ΔHR = 22±8.9 bpm) and highest in drift drilling in dead rock with electric drilling machine (ΔHR = 30±6.9 bpm). During sham alarm situation the work pulse was significantly higher than during normal activities with the same physical task (ΔHR = 36.7±4.8 bpm vs. 25.8±1.6 bpm, p < 0.001). When work was performed under different psychological stress, the work pulse was consistently higher, while improving the work place illumination decreased the physiological strain appreciably (ΔHR (median, 25-75 percentiles) = 23, 20-26 bmp vs. 28, 25-31.3 bpm, p < 0.001). Recording the heart rate during whole-shift work along with the work conditions gives reliable results and helps isolating factors that contribute to increased strain. The results can be used to implement preventive and health promotion measures. This

  10. Physiological strain in the Hungarian mining industry: The impact of physical and psychological factors

    Directory of Open Access Journals (Sweden)

    József Varga

    2016-08-01

    Full Text Available Objectives: The objectives of these investigations completed on workplaces in the Hungarian mining industry were to characterize the physiological strain of workers by means of work pulse and to examine the effects of work-related psychological factors. Material and Methods: Continuous heart rate (HR recording was completed on 71 miners over a total of 794 shifts between 1987 and 1992 in mining plants of the Hungarian mining industry using a 6-channel recorder – Bioport (ZAK, Germany. The work processes were simultaneously documented by video recording along with drawing up the traditional ergonomic workday schedule. All workers passed health evaluation for fitness for work. The effects of different psychological factors (simulated danger, “instrument stress,” presence of managers, and effect of prior involvement in accidents as well as different mining technologies and work place illumination on the work pulse were evaluated. The statistical analysis was completed using SPSS software (version 13.0, SPSS Inc., USA. Results: The work-related physiological strain differed between work places with different mining technologies in groups of 12–18 workers. The work pulse was lowest in bauxite mining (ΔHR = 22±8.9 bpm and highest in drift drilling in dead rock with electric drilling machine (ΔHR = 30±6.9 bpm. During sham alarm situation the work pulse was significantly higher than during normal activities with the same physical task (ΔHR = 36.7±4.8 bpm vs. 25.8±1.6 bpm, p < 0.001. When work was performed under different psychological stress, the work pulse was consistently higher, while improving the work place illumination decreased the physiological strain appreciably (ΔHR (median, 25–75 percentiles = 23, 20–26 bmp vs. 28, 25–31.3 bpm, p < 0.001. Conclusions: Recording the heart rate during whole-shift work along with the work conditions gives reliable results and helps isolating factors that contribute to increased strain. The

  11. Applying industrial engineering practices to radiology.

    Science.gov (United States)

    Rosen, Len

    2004-01-01

    Seven hospitals in Oregon and Washington have successfully adopted the Toyota Production System (TPS). Developed by Taiichi Ohno, TPS focuses on finding efficiencies and cost savings in manufacturing processes. A similar effort has occurred in Canada, where Toronto's Hospital for Sick Children has developed a database for its diagnostic imaging department built on the principles of TPS applied to patient encounters. Developed over the last 5 years, the database currently manages all interventional patient procedures for quality assurance, inventory, equipment, and labor. By applying industrial engineering methodology to manufacturing processes, it is possible to manage these constraints, eliminate the obstacles to achieving streamlined processes, and keep the cost of delivering products and services under control. Industrial engineering methodology has encouraged all stakeholders in manufacturing plants to become participants in dealing with constraints. It has empowered those on the shop floor as well as management to become partners in the change process. Using a manufacturing process model to organize patient procedures enables imaging department and imaging centers to generate reports that can help them understand utilization of labor, materials, equipment, and rooms. Administrators can determine the cost of individual procedures as well as the total and average cost of specific procedure types. When Toronto's Hospital for Sick Children first implemented industrial engineering methodology to medical imaging interventional radiology patient encounters, it focused on materials management. Early in the process, the return on investment became apparent as the department improved its management of more than 500,000 dollars of inventory. The calculated accumulated savings over 4 years for 10,000 interventional procedures alone amounted to more than 140,000 dollars. The medical imaging department in this hospital is only now beginning to apply what it has learned to

  12. Mineral resources accounting: A technique formonitoring the Philippine mining industry for sustainable development

    Science.gov (United States)

    Santos, Teodoro M.; Zaratan, May L.

    Mining which extracts exhaustible mineral resources has been condemned by certain sectors as promoting social inequity and underdevelopment. This is so because once a tonne of copper, say, is mined it is forever lost to the future generation. Such perception translates into policies that are usually disadvantageous or even hostile to the industry. Despite this adverse criticism, recent developments in natural resources accounting indicate that mining can truly contribute to the sustainable economic development of a society. True worth of mining in economic development can be assessed and monitored on a continuing basis through an appropriate system of natural accounts (SNA). If the industry is found deficient, such SNA can also point out how the industry can be made to constribute to sustainable growth. The prevailing SNA is criticized as having failed to capture the adverse effects on the welfare of society of producing a nonrenewable resource such as minerals. For instance, the production of copper for a particular year registers an increase in gross national product equivalent to its monetary value. However, the concomitant depletion of the country's natural wealth due to such production is nowhere recorded in the SNA. This faulty accounting gives rise to policies that result in nonsustainable economic growth. In order to address the preceding problem, this paper presents an accounting formula applicable to any nonrenewable resource whereby revenue is decomposed into income and capital components. To achieve sustainable economic growth, it states that the capital component must be invested to generate future incomes. However, investments need not be confined to the same sector. Application of the accounting scheme to the Philippine copper and gold sectors during the 1980-1990 period leads to the following conclusions: (a) by and large, gold and copper mining operations have indeed contributed positively to national income, contrary to allegations of certain

  13. Environmental Impacts and Health Aspects in the Mining Industry. A Comparative Study of the Mining and Extraction of Uranium, Copper and Gold

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Jenny-Ann; Randhem, Johan

    2008-07-01

    This thesis work has analysed environmental impacts and health aspects in the mining industry of copper, uranium and gold with the aim of determining the relative performance, in a given set of parameters, of the uranium mining industry. A selection of fifteen active mining operations in Australia, Canada, Namibia, South Africa, and the United States of America constitute the subject of this study. The project includes detailed background information about mineral extraction methods, the investigated minerals and the mining operations together with descriptions of the general main health hazards and environmental impacts connected to mining. The mineral operations are investigated in a cradle to gate analysis for the year of activity of 2007 using the economic value of the product at the gate as functional unit. Primary data has been collected from environmental reports, company web pages, national databases and through personal contact with company representatives. The subsequent analysis examines the collected data from a resource consumption, human health and ecological consequences point of view. Using the Life Cycle Impact Assessment methodology of characterisation, primary data of environmental loads have been converted to a synoptic set of environmental impacts. For radiation and tailings issues, a more general approach is used to address the problem. Based on the collected data and the investigated parameters, the results indicate a presumptive relative disadvantageous result for the uranium mining industry in terms of health aspects but an apparent favourable relative result in terms of environmental impacts. Given the prerequisites of this study, it is not feasible to draw any unambiguous conclusions. Inabilities to do this are mainly related to inadequate data availability from mine sites (especially in areas concerning tailings management), and difficulties concerned with the relative valuation of specific performance parameters, in particular radiation

  14. Environmental Impacts and Health Aspects in the Mining Industry. A Comparative Study of the Mining and Extraction of Uranium, Copper and Gold

    International Nuclear Information System (INIS)

    Nilsson, Jenny-Ann; Randhem, Johan

    2008-01-01

    This thesis work has analysed environmental impacts and health aspects in the mining industry of copper, uranium and gold with the aim of determining the relative performance, in a given set of parameters, of the uranium mining industry. A selection of fifteen active mining operations in Australia, Canada, Namibia, South Africa, and the United States of America constitute the subject of this study. The project includes detailed background information about mineral extraction methods, the investigated minerals and the mining operations together with descriptions of the general main health hazards and environmental impacts connected to mining. The mineral operations are investigated in a cradle to gate analysis for the year of activity of 2007 using the economic value of the product at the gate as functional unit. Primary data has been collected from environmental reports, company web pages, national databases and through personal contact with company representatives. The subsequent analysis examines the collected data from a resource consumption, human health and ecological consequences point of view. Using the Life Cycle Impact Assessment methodology of characterisation, primary data of environmental loads have been converted to a synoptic set of environmental impacts. For radiation and tailings issues, a more general approach is used to address the problem. Based on the collected data and the investigated parameters, the results indicate a presumptive relative disadvantageous result for the uranium mining industry in terms of health aspects but an apparent favourable relative result in terms of environmental impacts. Given the prerequisites of this study, it is not feasible to draw any unambiguous conclusions. Inabilities to do this are mainly related to inadequate data availability from mine sites (especially in areas concerning tailings management), and difficulties concerned with the relative valuation of specific performance parameters, in particular radiation

  15. Industry best practices for the software development life cycle

    Science.gov (United States)

    2007-11-01

    In the area of software development, there are many different views of what constitutes a best practice. The goal of this project was to identify a set of industry best practice techniques that fit the needs of the Montana Department of Transportatio...

  16. Case studies of sealing methods and materials used in the salt and potash mining industries

    International Nuclear Information System (INIS)

    Eyermann, T.J.; Sambeek, L.L. Van; Hansen, F.D.

    1995-11-01

    Sealing methods and materials currently used in salt and potash industries were surveyed to determine if systems analogous to the shaft seal design proposed for the Waste Isolation Pilot Plant (WIPP) exist. Emphasis was first given to concrete and then expanded to include other materials. Representative case studies could provide useful design, construction, and performance information for development of the WIPP shaft seal system design. This report contains a summary of engineering and construction details of various sealing methods used by mining industries for bulkheads and shaft liners. Industrial experience, as determined from site visits and literature reviews, provides few examples of bulkheads built in salt and potash mines for control of water. Sealing experiences representing site-specific conditions often have little engineering design to back up the methods employed and even less quantitative evaluation of seal performance. Cases examined include successes and failures, and both contribute to a database of experiences. Mass salt-saturated concrete placement under ground was accomplished under several varied conditions. Information derived from this database has been used to assess the performance of concrete as a seal material. Concrete appears to be a robust material with successes in several case studies. 42 refs

  17. Case studies of sealing methods and materials used in the salt and potash mining industries

    Energy Technology Data Exchange (ETDEWEB)

    Eyermann, T.J.; Sambeek, L.L. Van [RE/SPEC Inc., Rapid City, SD (United States); Hansen, F.D. [Sandia National Labs., Albuquerque, NM (United States). Repository Isolation Systems Dept.

    1995-11-01

    Sealing methods and materials currently used in salt and potash industries were surveyed to determine if systems analogous to the shaft seal design proposed for the Waste Isolation Pilot Plant (WIPP) exist. Emphasis was first given to concrete and then expanded to include other materials. Representative case studies could provide useful design, construction, and performance information for development of the WIPP shaft seal system design. This report contains a summary of engineering and construction details of various sealing methods used by mining industries for bulkheads and shaft liners. Industrial experience, as determined from site visits and literature reviews, provides few examples of bulkheads built in salt and potash mines for control of water. Sealing experiences representing site-specific conditions often have little engineering design to back up the methods employed and even less quantitative evaluation of seal performance. Cases examined include successes and failures, and both contribute to a database of experiences. Mass salt-saturated concrete placement under ground was accomplished under several varied conditions. Information derived from this database has been used to assess the performance of concrete as a seal material. Concrete appears to be a robust material with successes in several case studies. 42 refs.

  18. Safety climate practice in Korean manufacturing industry

    International Nuclear Information System (INIS)

    Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P.

    2008-01-01

    Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended

  19. Safety climate practice in Korean manufacturing industry.

    Science.gov (United States)

    Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P

    2008-11-15

    Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

  20. Safety climate practice in Korean manufacturing industry

    Energy Technology Data Exchange (ETDEWEB)

    Baek, Jong-Bae [Department of Safety Engineering, Chungju National University, Chungju 380-702 (Korea, Republic of); Bae, Sejong [Department of Biostatistics, University of North Texas Health Science Center, 3500 Camp Bowie Boulevard, Fort Worth, TX 76107 (United States)], E-mail: sbae@hsc.unt.edu; Ham, Byung-Ho [Department of Industrial Safety, Ministry of Labor (Korea, Republic of); Singh, Karan P. [Department of Biostatistics, University of North Texas Health Science Center, 3500 Camp Bowie Boulevard, Fort Worth, TX 76107 (United States)

    2008-11-15

    Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

  1. Benchmarking Sustainability Practices Use throughout Industrial Construction Project Delivery

    Directory of Open Access Journals (Sweden)

    Sungmin Yun

    2017-06-01

    Full Text Available Despite the efforts for sustainability studies in building and infrastructure construction, the sustainability issues in industrial construction remain understudied. Further, few studies evaluate sustainability and benchmark sustainability issues in industrial construction from a management perspective. This study presents a phase-based benchmarking framework for evaluating sustainability practices use focusing on industrial facilities project. Based on the framework, this study quantifies and assesses sustainability practices use, and further sorts the results by project phase and major project characteristics, including project type, project nature, and project delivery method. The results show that sustainability practices were implemented higher in the construction and startup phases relative to other phases, with a very broad range. An assessment by project type and project nature showed significant differences in sustainability practices use, but no significant difference in practices use by project delivery method. This study contributes to providing a benchmarking method for sustainability practices in industrial facilities projects at the project phase level. This study also discusses and provides an application of phase-based benchmarking for sustainability in industrial construction.

  2. Developments in the German coal mining industry; Entwicklungen im deutschen Steinkohlenbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Eikhoff, J. [Deutsche Steinkohle AG (DSK), Herne (Germany)

    2007-02-01

    The developments in the German coal mining industry are always associated with the questions of national energy supply. The main emphasis is on a balanced energy mix with the aim of security of supply, compatibility with the environment and profitability. The operating aim of an increase in productivity to reduce costs is derived on this basis. The innovative operation required for this purpose results from the combination of technical, process and social innovation. The two last-mentioned are becoming increasingly important for a high rate of innovation at the collieries of DSK. (orig.)

  3. ANALYZING THE CLASSIC METHODS OF ORGANIZING THE ADMINISTRATION ACCOUNTACY USED IN THE CARBONIFEROUS MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    PALIU-POPA Lucia

    2009-12-01

    Full Text Available Information regarding production costs occupy a central slot, determined by their implications regarding the present and future evolution of a company. The value of information regarding the cost of production justifies its use both in decisions regarding the current activity and in the company’s future strategy. The efficient organization of economic activity in the carboniferous mining industry imposes a constant improvement of management methods, which also implies a reconsideration of administration accountancy methods and cost control, which have to become capable of offering information that can be compatible to the requirements for an efficient management of the production process, in a market economy.

  4. Partnership in mining

    Energy Technology Data Exchange (ETDEWEB)

    Haslam, R

    1988-04-01

    This paper discusses the benefits resulting from mutual cooperation and information exchange between the UK and USA coal industries. The aim of this cooperation is to promote safe and efficient extraction and profitable use of coal. Advanced mining technologies and mechanisation of the coal mines are some of the results of research cooperation between British Coal and the US Bureau of Mines. In addition, Britain has studied and put into good use the management styles, working practices and pay structure, and mining engineering adopted in the USA.

  5. Waste management and environmental controls in the Australian uranium mining industry

    International Nuclear Information System (INIS)

    Walker, D.G.; Morison, I.W.

    1982-01-01

    The development of the waste management and related environmental controls applied to uranium mining and processing in Australia is described. Major uranium deposits occur in the Alligator Rivers Region of the Northern Territory, a world heritage tropical wetland area with deep significance to Aboriginal people. The formulation of environmental controls took into consideration the unique features of the region in addition to experiences from earlier uranium mining operations. A description is given of the operations at Rum Jungle, the pollutants released and their effects on the environment. Commonwealth and State responsibilities for waste management and environmental control and the establishment of Codes of Practice are noted and proposed water management and tailings management programs at the four Alligator Rivers sites are described

  6. Industrial Relations and Firm Behavior: Informal Labor Practices in the West Coast Longshore Industry.

    Science.gov (United States)

    Finlay, William

    1987-01-01

    Considers industrial relations policies and practices of stevedore firms in the West Coast longshore industry in terms of the social worker, worker-resource, and institutional theories. Subsidiary firms were more lenient in contract interpretation and more competitive in recruitment, supporting the worker-resource theory. Includes 2 tables and 33…

  7. Metal mining to the aid of the oil sands? Lateral opportunities in industrial cross-breeding

    Energy Technology Data Exchange (ETDEWEB)

    Sabag, S.F. [Dumont Nickel Inc., Toronto, ON (Canada)

    2009-07-01

    This paper demonstrated how oil sands operations can benefit from supporting innovative low cost metal mining to enhance their eco-footprint. Northeast Alberta contains large accumulations of recoverable metals, hosted in metal bearing black shales. Immense low grade polymetallic zones were discovered in 1995 but could not be exploited with existing recovery technologies. However, significant advances in bioleaching of metals from polymetallic black shale deposits have propelled this new deposit type to the forefront over the past 5 years as a long term future source of metals. Compared to traditional smelting and refining, bioleaching has lower Capex/Opex, lower eco-footprint and less energy dependence. Envisaged metal mining in the black shales of northeast Alberta can benefit oil sands operations by consuming large amounts of waste sulfur while also providing collateral opportunities for carbon sinks/offsets. Black shales have the capacity to sequester carbon dioxide (CO{sub 2}). Dumont Nickel Inc. is advancing 6 polymetallic black shale projects in northeast Alberta over 2,500 km{sup 2} with potential for hosting up to 20 billion tons in six 50-100 km{sup 2} deposits. The projects present opportunities to develop low footprint metal mines, to use run-of-river hydro, to harvest waste heat, and to combine local technologies to create a new valuable industry independent of energy markets.

  8. No nuclear mining industries and the increase to natural radiation exposure

    International Nuclear Information System (INIS)

    Pires do Rio, Monica Aquino

    1999-01-01

    Mining and processing activities dealing with mineral ores containing associated uranium and thorium series elements can make these radionuclides available in their products, byproducts and in the environment, leading to the enhancement of the exposure of the public to natural radiation. In the present study, niobium, phosphate, coal and gold mining plants have been selected as case studies, aiming to identify possible radiological impact sources during and after ceasing the operation on these units. In order to achieve that, the radiological characterization of samples from ore processing, drainage water and other liquid emissions was carried out. The potential environmental radiological impact was quantified by means of estimating the effective dose equivalent, H E , for present and future scenarios considering the use of the environment in the vicinities of the units and future tailing storage sites. The results confirm these mining industries as activities potentially enhancing exposure to natural radiation. The possible use of solid wastes, abandoned at the end of operation, represents a long term radiological concern. The acid drainage, as well as the chemical processing of mineral ores constitute relevant impact factors for present and future scenarios. Thus, the legislation for environmental licensing must be reviewed in order to take into account the potential environmental radiological impact caused by these units, as well as the establishment of remediation procedures for waste storage areas in the existing sites. (author)

  9. Radon exposure in uranium mining industry vs. exposure in tourist caves

    International Nuclear Information System (INIS)

    Quindos Poncela, L.; Fernandez Navarro, P.; Sainz Fernandez, C.; Gomez Arozamena, J.; Bordonoba Perez, M.

    2004-01-01

    There is a fairly general consensus among health physicists and radiation professionals that exposure to radon progeny is the largest and most variable contribution to the population's exposure to natural sources of radiation. However, this exposure is the subject of continuing debate concerning the validity of risk assessment and recommendations on how to act in radon-prone areas. The purpose of this contribution is to situate the radon issue in Spain in two very different settings. The first is a uranium mining industry located in Saelices el Chico (Salamanca), which is under strict control of the Spanish Nuclear Safety Council (CSN). We have measured radon concentrations in different workplaces in this mine over a five-year period. The second setting comprises four tourist caves, three of which are located in the province of Cantabria and the fourth on the Canary Island of Lanzarote. These caves are not subject to any administrative control of radiation exposure. Measured air 222 Rn concentrations were used to estimate annual effective doses due to radon inhalation in the two settings, and dose values were found to be from 2 to 10 times lower in the uranium mine than in the tourist caves. These results were analysed in the context of the new European Basic Safety Standards Directive (EU-BSS, 1996). (authors)

  10. Nuclear-geophysical methods as a basis of progressive technology of ore quality control in mining industry

    International Nuclear Information System (INIS)

    Mejer, V.A.

    1976-01-01

    The significance of nuclear physics methods in the mining industry is demonstrated using examples of applying the X-ray diffraction method to the delimitation of lead-zinc and tin ores in exploratory wells, faces of mine workings and to a quick estimation of metal contents in hacked-off rocks and market payable ore. Their implementation at all stages of the exploration and development of deposits would improve the extraction of ores and reduce losses of the raw material during technological treatment. Owing to the rapidity and operativeness of control over the quality of ores at all stages of geological prospecting and mining, nuclear physics methods can provide a basis for technological progress in the mining industry

  11. Metal-containing residues from industry and in the environment: geobiotechnological urban mining.

    Science.gov (United States)

    Glombitza, Franz; Reichel, Susan

    2014-01-01

    This chapter explains the manifold geobiotechnological possibilities to separate industrial valuable metals from various industrial residues and stored waste products of the past. In addition to an overview of the different microbially catalyzed chemical reactions applicable for a separation of metals and details of published studies, results of many individual investigations from various research projects are described. These concern the separation of rare earth elements from phosphorous production slags, the attempts of tin leaching from mining flotation residues, the separation of metals from spent catalysts, or the treatment of ashes as valuable metal-containing material. The residues of environmental technologies are integrated into this overview as well. The description of the different known microbial processes offers starting points for suitable and new technologies. In addition to the application of chemolithoautotrophic microorganisms the use of heterotrophic microorganisms is explained.

  12. Tracing Knowledge Transfer from Universities to Industry: A Text Mining Approach

    DEFF Research Database (Denmark)

    Woltmann, Sabrina; Alkærsig, Lars

    2017-01-01

    This paper identifies transferred knowledge between universities and the industry by proposing the use of a computational linguistic method. Current research on university-industry knowledge exchange relies often on formal databases and indicators such as patents, collaborative publications and l...... is the first step to enable the identification of common knowledge and knowledge transfer via text mining to increase its measurability....... and license agreements, to assess the contribution to the socioeconomic surrounding of universities. We, on the other hand, use the texts from university abstracts to identify university knowledge and compare them with texts from firm webpages. We use these text data to identify common key words and thereby...... identify overlapping contents among the texts. As method we use a well-established word ranking method from the field of information retrieval term frequency–inverse document frequency (TFIDF) to identify commonalities between texts from university. In examining the outcomes of the TFIDF statistic we find...

  13. ADA Title I allegations and the Mining, Quarrying, and Oil/Gas Extraction industry.

    Science.gov (United States)

    Van Wieren, Todd A; Rhoades, Laura; McMahon, Brian T

    2017-01-01

    The majority of research about employment discrimination in the U.S. Mining, Quarrying, and Oil/Gas (MQOGE) industries has concentrated on gender and race, while little attention has focused on disability. To explore allegations of Americans with Disabilities Act (ADA) Title I discrimination made to the Equal Employment Opportunity Commission (EEOC) by individuals with disabilities against MQOGE employers. Key data available to this study included demographic characteristics of charging parties, size of employers, types of allegations, and case outcomes. Using descriptive analysis, allegation profiles were developed for MQOGE's three main sectors (i.e., Oil/Gas Extraction, Mining except Oil/Gas, and Support Activities). These three profiles where then comparatively analyzed. Lastly, regression analysis explored whether some of the available data could partially predict MQOGE case outcomes. The predominant characteristics of MQOGE allegations were found to be quite similar to the allegation profile of U.S. private-sector industry as a whole, and fairly representative of MQOGE's workforce demographics. Significant differences between MQOGE's three main sector profiles were noted on some important characteristics. Lastly, it was found that MQOGE case outcomes could be partially predicted via some of the available variables. The study's limitations were presented and recommendations were offered for further research.

  14. Proximity to mining industry and respiratory diseases in children in a community in Northern Chile: A cross-sectional study.

    Science.gov (United States)

    Herrera, Ronald; Radon, Katja; von Ehrenstein, Ondine S; Cifuentes, Stella; Muñoz, Daniel Moraga; Berger, Ursula

    2016-06-07

    In a community in northern Chile, explosive procedures are used by two local industrial mines (gold, copper). We hypothesized that the prevalence of asthma and rhinoconjunctivitis in the community may be associated with air pollution emissions generated by the mines. A cross-sectional study of 288 children (aged 6-15 years) was conducted in a community in northern Chile using a validated questionnaire in 2009. The proximity between each child's place of residence and the mines was assessed as indicator of exposure to mining related air pollutants. Logistic regression, semiparametric models and spatial Bayesian models with a parametric form for distance were used to calculate odds ratios and 95 % confidence intervals. The prevalence of asthma and rhinoconjunctivitis was 24 and 34 %, respectively. For rhinoconjunctivitis, the odds ratio for average distance between both mines and child's residence was 1.72 (95 % confidence interval 1.00, 3.04). The spatial Bayesian models suggested a considerable increase in the risk for respiratory diseases closer to the mines, and only beyond a minimum distance of more than 1800 m the health impact was considered to be negligible. The findings indicate that air pollution emissions related to industrial gold or copper mines mainly occurring in rural Chilean communities might increase the risk of respiratory diseases in children.

  15. Sustainable Manufacturing Practices in Malaysian Automotive Industry: Confirmatory Factor Analysis

    OpenAIRE

    Habidin, Nurul Fadly; Zubir, Anis Fadzlin Mohd; Fuz, Nursyazwani Mohd; Latip, Nor Azrin Md; Azman, Mohamed Nor Azhari

    2015-01-01

    Sustainable manufacturing practices (SMPs) have received enormous attention in current years as an effective solution to support the continuous growth and expansion of the automotive manufacturing industry. This reported study was conducted to examine confirmatory factor analysis for SMP such as manufacturing process, supply chain management, social responsibility, and environmental management based on automotive manufacturing industry. The results of confirmatory factor analysis show that fo...

  16. Application of ERTS-1 imagery to fracture related mine safety hazards in the coal mining industry. [Indiana

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T. V.

    1974-01-01

    The author has identified the following significant results. New fracture detail of Indiana has been observed and mapped from ERTS-1 imagery. Studies so far indicate a close relationship between the directions of fracture traces mapped from the imagery, fractures measured on bedrock outcrops, and fractures measured in the underground mines. First hand observations and discussions with underground mine operators indicate good correlation of mine hazard maps prepared from ERTS-1/aircraft imagery and actual roof falls. The inventory of refuse piles/slurry ponds of the coal field of Indiana has identified over 225 such sites from past mining operations. These data will serve the State Legislature in making tax decisions on coal mining which take on increased importance because of the energy crisis.

  17. Coal mining in the power industry of the Federal Republic of Germany in 1993

    International Nuclear Information System (INIS)

    1994-11-01

    After an introductory text divided into the sections energy and coal market, Coal mining and brown coal mining, extensive tables containing the most important characteristic figures of German coal mining are shown. (orig.) [de

  18. Waste management and environmental controls in the Australian uranium mining industry

    International Nuclear Information System (INIS)

    Walker, D.G.; Morison, I.W.

    1983-01-01

    An outline is given of the development of the waste management and related environmental controls currently applied to uranium mining and processing in Australia, reflecting three decades of experience. The Ranger Uranium Environmental Inquiry of the mid-1970s was, inter alia, a focus for the expression of public concerns over the environmental effects of uranium mining. The report of the Inquiry established a framework for controls over uranium mining in the Northern Territory and, by association, in other States of the Commonwealth. The interaction between Federal and State jurisdictions, and the establishment of Codes of Practice and their implications are briefly described. Current procedures are based on the experience of other countries but are much influenced by studies of the environmental impact of uranium production in Australia during the 1950s and 1960s. In addition, laboratory investigations have been made of specific processes, such as the impact of heavy metal contaminants on biota and the uptake of radium in the human food cycle. Such studies are continuing and research is being expanded, particularly in relation to Northern Territory developments. Australia is contributing the results of this work to appropriate international forums. (author)

  19. A European Competence Framework for Industrial Pharmacy Practice in Biotechnology

    Directory of Open Access Journals (Sweden)

    Jeffrey Atkinson

    2015-07-01

    Full Text Available The PHAR-IN (“Competences for industrial pharmacy practice in biotechnology” looked at whether there is a difference in how industrial employees and academics rank competences for practice in the biotechnological industry. A small expert panel consisting of the authors of this paper produced a biotechnology competence framework by drawing up an initial list of competences then ranking them in importance using a three-stage Delphi process. The framework was next evaluated and validated by a large expert panel of academics (n = 37 and industrial employees (n = 154. Results show that priorities for industrial employees and academics were similar. The competences for biotechnology practice that received the highest scores were mainly in: “Research and Development”, ‘“Upstream” and “Downstream” Processing’, “Product development and formulation”, “Aseptic processing”, “Analytical methodology”, “Product stability”, and “Regulation”. The main area of disagreement was in the category “Ethics and drug safety” where academics ranked competences higher than did industrial employees.

  20. 33 CFR 334.20 - Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area.

    Science.gov (United States)

    2010-07-01

    ... REGULATIONS § 334.20 Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. (a) The... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. 334.20 Section 334.20 Navigation and Navigable Waters...

  1. Strategy and business development practices in Danish constrution industry SMEs

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff; Koch, Christian; Nielsen, Jesper Salling

    2010-01-01

    practices. 19 qualitative interviews have been conducted in total representing architects, engineering companies, contractors and subcontractors. Based on an in-depth analysis of this empirical material, the study finds: (1) he market is characterized by a typical “red ocean” environment, where...... the companies compete on their overhead rather than their ability to reduce production cost and create value. (2) the companies have a reactive practice towards development, where they try to follow the development in the market rather than shaping their own market. (3) their approach towards strategy...... development represents an important but unacknowledged practice for innovation of the building industry and suggests that strategy processes should be facilitated and subject to more detailed research in order to escape the present unhealthy market practices in the construction industry....

  2. An analysis of workers' morale in the coal mining industry using principal component analysis

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, J; La Court, C; Pearson, J M

    1987-03-01

    This paper looks at labour morale in the coal mining industry from 1967 to 1984. In particular it examines absenteeism, turnover and accidents over that period, as well as constructing an index of morale based on these variables. The data are taken from the North Nottinghamshire and South Yorkshire coal areas, and a comparison is made between these areas in the period leading up to the industrial action in 1984/85. The indices constructed indicate that morale, as measured by the first principal component, increased considerably during the years before the 1984 industrial dispute and that low morale was an unlikely reason for the dispute, although morale in South Yorkshire, a strike area, was lower than in North Nottinghamshire, largely a non-strike area. The steep rise in morale in both North Nottinghamshire and South Yorkshire follows closely the rise in unemployment nationally and may simply be an indication of conventional industrial relations assumptions that manifestations of negative worker attitudes are greatest when jobs are relatively plentiful, and considerably less so when jobs are scarce.

  3. An analysis of workers' morale in the coal mining industry using principal component analysis

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, J.; La Court, C.; Pearson, J.M.

    1987-03-01

    This paper looks at labour morale in the coal mining industry from 1967 to 1984. In particular it examines absenteeism, turnover and accidents over that period, as well as constructing an index of morale based on these variables. The data are taken from the North Nottinghamshire and South Yorkshire coal areas, and a comparison is made between these areas in the period leading up to the industrial action in 1984/85. The indices constructed indicate that morale, as measured by the first principal component, increased considerably during the years before the 1984 industrial dispute and that low morale was an unlikely reason for the dispute, although morale in South Yorkshire, a strike area, was lower than in North Nottinghamshire, largely a non-strike area. The steep rise in morale in both North Nottinghamshire and South Yorkshire follows closely the rise in unemployment nationally and may simply be an indication of conventional industrial relations assumptions that manifestations of negative worker attitudes are greatest when jobs are relatively plentiful, and considerably less so when jobs are scarce.

  4. Practical application of solid phase spectrophotometry in analysis of materials and goods of mining and metallurgy

    International Nuclear Information System (INIS)

    Duan Qunzhang

    1999-01-01

    The author reviewed recent development and practical application of solid phase spectrophotometry in analysis of materials and goods of mining-metallurgy. Separation and preconcentration and conditions of coloring determination, sensitivity and range of detection, as well as interference of corresponding method are discussed

  5. Energy Efficiency Practices: Assessment of Ohrid Hotel Industry

    OpenAIRE

    Petrevska, Biljana; Cingoski, Vlatko

    2016-01-01

    This paper provides information on the extent how the hotel industry in Ohrid meets the energy efficiency practices in terms of the current level of involvement. By undertaking an online survey in three, four and five-star hotels, the study assesses the attitudes and willingness of hotel managers concerning applying energy efficiency and environmental protection concepts and practices. Moreover, it investigates various determinants of energy consumption, like: solid waste management, resource...

  6. Rehabilitation of residual pits in post-mining area: a goal of Czech brown coal opencast mining industry

    International Nuclear Information System (INIS)

    Svoboda, I.

    1997-01-01

    The closure of surface brown coal mines is a complex process with many specific considerations. In the Czech Republic a special project was proposed to analyze the types of environmental disturbance generated by surface mining operations and suggest procedures for the affected areas. It also aims to propose rehabilitation techniques for residual pits, considering their future use for recreational or development purposes. A Chabarovice mine case study demonstrates how to solve the problem of water flooding and utilization of the future residual lake. 2 figs

  7. Guide to request license for industrial X-rays practices

    International Nuclear Information System (INIS)

    2000-05-01

    In this work the instructions it plows described to request license for practices it of industrial x-ray it continued. The instructions but important: they plows license type, purpose of the application, source and equipment, location of local the, program of radiological protection and security

  8. Evaluation of safety practices and performance in a brewery industry ...

    African Journals Online (AJOL)

    Evaluation of safety practices and performance in a brewery industry in Nigeria between 2000 – 2007. ... Journal of Applied Sciences and Environmental Management ... The study revealed that a total of 156 accidents were prevented in the period of the safety programme which translates to an average of 19.45 per year.

  9. Innovative quality management practices in the Dutch construction industry

    NARCIS (Netherlands)

    Bossink, B.A.G.

    2002-01-01

    Quality management practices do support the management of strategically important innoυation processes. This conclusion is based on empirical research in the Dutch construction industry. A large-scale innovative construction project is intensively studied during a three-year period. The quality

  10. Fraud and Fraudulent Practices in Nigeria Banking Industry ...

    African Journals Online (AJOL)

    The paper reviews the various forms of fraudulent practice their impact and inducement for various reforms in banking industry. It also mentions various legislations targeted at reducing fraud and introducing some forms of control and reporting systems. Various theories of fraud are examined and detailed analysis of various ...

  11. Closeout of uranium mines and mills: A review of current practices

    International Nuclear Information System (INIS)

    1997-04-01

    The present report is a first step in gathering information on the assessment and control of the long term (over a few centuries) impact of uranium mining and milling waste. Its intention is to outline several examples of worldwide experience. It contains summaries of current closeout practices which have not previously been presented in a singly publication. It is expected to provide necessary information to Member States to formulate meaningful decisions for adequately controlling impacts resulting from uranium mines and mills waste materials. The information contained herein may also be valuable as background material for developing relevant guidance in this subject area, for example within the IAEA Safety Standards Programme. Refs, figs, tabs

  12. Conceptual model for decision support in mining industry NORM - aspects of environmental radiation protection

    International Nuclear Information System (INIS)

    Reis, Rocio Gloria dos

    2012-01-01

    Mining like many other industries can cause environmental impact. One of aspects that is in focus in many countries concerns to quantify the impact and establish requirements or improve the existing regulation about naturally occurring radioactive material - NORM. By a suitable management of the activities in these industries, there is an effort to minimize the waste production, minimize the environmental impacts and, consequently, the exposure of members of the public and workers. This study developed a conceptual model, a tool to assist in the decision making process for managers of mining and industrial facilities that deal with NORM. To develop this model, the Brazilian regulations were confronted with the regulations of countries where the NORM subject is important and with those that are being established by the principal institutions of radioprotection. The need of updating the Brazilian regulations was observed. Some recurring themes that are relevant to the management of NORM industries were surveyed, which resulted in the insertion of non-human biota risk assessment and the participation of stakeholders in the proposed model. The model was applied to a real case, the phosphoric acid and uranium plant of Santa Quiteria, in the Ceara state, with the aim of identifying the main critical points of the facility from the perspective of the environmental radiological impact and evaluating the adequacy of model, in addition to providing subsidies for its improvement. By the assessment of the process, it was found that the main source would be the phosphogypsum stack, which "2"2"6Ra activity concentration might exceed the level established for its use in agriculture and cement industry. The impact assessment was carried out in three different scenarios: 1) the critical group located in the facility borders, 2) the critical group located on the stack, after the closure of the area and 3) workers. In all cases, the exercise pointed out the exceeding of the adopted

  13. Derived surface contamination limits for the uranium mining and milling industry

    International Nuclear Information System (INIS)

    Ching, S.H.

    1984-10-01

    Derived Surface Contamination Limits (DSCL) are proposed for the control of surface contamination at the work place for the uranium mining and milling industry. They have been derived by a method incorporating recent ICRP recommendations and consideration of the radiation exposure pathways of ingestion, inhalation and external irradiation of the basal layer of skin. A generalized DSCL of 10 5 Bq/m 2 of beta activity is recommended for all contaminants likely to be found in uranium mine and mill workplaces except for fresh uranium concentrates. In the latter case, the DSCL is expressed in terms of alpha activity because the ratio of beta to alpha activities for fresh uranium concentrates is variable; the beta activity increases with the ingrowth of U-238 daughter products (Th-234 and Pa-234m) until secular equilibrium is re-established in about six months. A surface contamination limit of 10 4 Bq/m 2 of beta activity is proposed for the release of non-porous materials and equipment with no detectable loose contamination to the public domain

  14. [Gender inequity in health in contexts of environmental risk from mining and industrial activity in Mexico].

    Science.gov (United States)

    Catalán-Vázquez, Minerva; Riojas-Rodríguez, Horacio

    2015-06-01

    Analyze how gender inequity manifests in contexts of poverty in different environmental risk scenarios in Mexico. Qualitative design based on six discussion groups and 54 in-depth interviews with women from six exposed communities: two to environmental manganese in a mining district, two in an industrial corridor, and two bordering a sanitary landfill. A document review of environmental and health studies in each area was done to relate them to the women's perspective on the problem. In the three case studies, by gender roles, women stay at home and do housework and, therefore, are subject to intense environmental exposure when carrying out their daily tasks, such as house cleaning. Interview and discussion group results were found to be related to epidemiological study results. In the case of the mining district, women's perceptions are consistent with study comments on adverse cognitive effects of manganese exposure. In all three cases, there are serious limitations on women's political participation in environmental risk management. Due to conditions of inequity, women are highly exposed to environmental health risks and their social participation in solving environmental problems is quite limited. These results have social and environmental policy implications in the areas studied, especially with regard to risk assessment, management, and communication.

  15. Factors in Adoption of e-Learning in the Mining Industry of South Africa

    Directory of Open Access Journals (Sweden)

    Machdel Matthee

    2014-06-01

    Full Text Available The mining industry in South Africa contributes significantly to its economy. Training is an important component in these environments and e-Learning is often used to train the large workforce. In the face of current labour unrest and job cuts in this sector, it is foreseen that e-Learning might play an increasing important role to upskill the remaining work force. However, it appears that low motivation and resistance to e-Learning exist amongst learners. The aim of this research was to examine the factors that may contribute to this resistance and/or adoption from the perspectives of e-Learning managers and practitioners. Activity theory was used as the theoretical lens and its main elements (tools, subjects, rules, objects, community were used to analyse interviews with participants from two mining companies. Potential contradictions were identified in order to explore resistance to e-Learning. The main findings indicate that: 1 proper communication of expectations by different stakeholders of e-Learning is imperative, 2 top management support for e-Learning should stem from integration into the organisational goals, 3 more attention should be given to interaction between learners and facilitators and also between learners, 4 a focus on people development rather than only compliance may lead to lower resistance, and 5 top management support and involvement should be made visible.

  16. Occupational Health and Safety and Organizational Commitment: Evidence from the Ghanaian Mining Industry.

    Science.gov (United States)

    Amponsah-Tawiah, Kwesi; Mensah, Justice

    2016-09-01

    This study seeks to examine the relationship and impact of occupational health and safety on employees' organizational commitment in Ghana's mining industry. The study explores occupational health and safety and the different dimensions of organizational commitment. A cross-sectional survey design was used for this study. The respondents were selected based on simple random sampling. Out of 400 questionnaires administered, 370 were returned (77.3% male and 22.7% female) and used for the study. Correlation and multiple regression analysis were used to determine the relationship and impact between the variables. The findings of this study revealed positive and significant relationship between occupational health and safety management, and affective, normative, and continuance commitment. Additionally, the results revealed the significant impact of occupational health and safety on affective, normative, and continuance commitment. Management within the mining sector of Ghana must recognize the fact that workers who feel healthy and safe in the performance of their duties, develop emotional attachment and have a sense of obligation to their organization and are most likely committed to the organization. Employees do not just become committed to the organization; rather, they expect management to first think about their health and safety needs by instituting good and sound policy measures. Thus, management should invest in the protection of employees' health and safety in organizations.

  17. Microcontroller based, ore grade measuring portable instruments for uranium mining industry

    International Nuclear Information System (INIS)

    Dheeraj Reddy, J.; Narender Reddy, J.

    2004-01-01

    Ore Face Scanning and Bore Hole Logging are important essential activities which are required to be carried out in any Uranium mining industry. Microcontroller based, portable instruments with built-in powerful embedded code for data acquisition (of Radiation counts) and Ore Grade calculations will become a handy measuring tool for miners. Nucleonix Systems has recently developed and made these two portable instruments available to UCIL, which are under use at Jaduguda and Narvapahar mines. Some of the important features of these systems are compact, light weight, portable, hand held, battery powered. Modes of Data Acquisition: CPS, CPM and ORE GRADE. Detector: Sensitive GM Tube. Choice of Adj. TC (Time Constant) in 'ORE GRADE', acquisition mode. Built-in automatic BG (Background) recording and subtraction provided to indicate net CPS, CPM or ore GRADE in PPM. Can store 1000 readings at users choice. Built-in RS232 serial port facilitates data downloading into PC. This paper focuses on design concepts and technical details for the above two products. (author)

  18. Assessment of application of 5S practices in ceramic industry

    Directory of Open Access Journals (Sweden)

    Danel Kleszcz

    2017-10-01

    Full Text Available Results of research connected with determining the degree of implementation of 5S practices in ceramics industry are discussed in this paper. Direct survey with employees of companies plus ex-pert interview was used in the research. A 21 point scale was used to assess the degree of implemen-tation the 5S practices at individual stages of the manufacturing process. The specificity of produc-tion in ceramics industry enforces maintaining the regime of cleanliness during production. The research revealed that the level of conscious implementation of the 5S practices in companies de-pends on the culture of organization and the degree of involvement of employees in the improvement actions in their company. The presented results are a part of the research aimed at determining refer-ence requirements for companies in terms of implementation and making use of the Lean Manage-ment (LM instruments.

  19. 100 years of the main mine rescue service. A contribution to the protection against disasters in the coal mining industry; 100 Jahre Hauptstelle fuer das Grubenrettungswesen. Ein Beitrag zum Katastrophenschutz im Steinkohlenbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Hermuelheim, Walter [RAG Aktiengesellschaft, Herne (Germany). Zentralbereich Arbeits-, Gesundheits- und Umweltschutz

    2011-06-15

    A review of 100 years of protection against disasters in the coal mining industry impressively shows the way from an era of major accidents to a modern branch of industry, which justifiably and with good prospects of success can pursue the aim of ''No accidents - no damage to health - no damage to the environment''. However, the development of the mine rescue service over more than 100 years - represented in the Ruhr by the Main Mine Rescue Service established in 1910 in Essen - would be incomplete without consideration of the allied technical fields underground fire protection and explosion protection. Cooperation between institutions such as the Tremonia test mine and the BVG has produced a safety level in all three fields, which is regarded as exemplary worldwide, and in addition to the latest mining technology is a good advertisement for the German coal mining industry. (orig.)

  20. Mining space and industrial heritage in Mexico: the mineral from Tlalpujahua [Michoacán state

    Directory of Open Access Journals (Sweden)

    José Alfredo Uribe Salas

    2014-12-01

    Full Text Available This paper deals with the historical dimension of the economic and social space of Tlalpujahua and El Oro Mining District from the perspective of the Industrial Heritage. The exploration and exploitation in search for precious minerals along the sixteenth to the twentieth centuries articulated a culture of wage labour and facilitated the circulation of new knowledge, technical expertise and an impressive technological innovation in the late nineteenth and early twentieth centuries. With the depletion of gold and silver in the mid-twentieth century, the socio-technical framework disappears but not the memory and industrial vestiges which represents long-term historical processes, and as a social laboratory allows to recognize and analyze the changes in the social relations of different human groups, different nationality and social status — workers, technicians, engineers, businessmen, traders, etc. —, who moved to the minerals in the quest to materialise their own life expectancy. The study and appreciation of the historical and cultural experience ensures the memory of the industrial heritage of Mexicans.

  1. A numerical calculation method of environmental impacts for the deep sea mining industry - a review.

    Science.gov (United States)

    Ma, Wenbin; van Rhee, Cees; Schott, Dingena

    2018-03-01

    Since the gradual decrease of mineral resources on-land, deep sea mining (DSM) is becoming an urgent and important emerging activity in the world. However, until now there has been no commercial scale DSM project in progress. Together with the reasons of technological feasibility and economic profitability, the environmental impact is one of the major parameters hindering its industrialization. Most of the DSM environmental impact research focuses on only one particular aspect ignoring that all the DSM environmental impacts are related to each other. The objective of this work is to propose a framework for the numerical calculation methods of the integrated DSM environmental impacts through a literature review. This paper covers three parts: (i) definition and importance description of different DSM environmental impacts; (ii) description of the existing numerical calculation methods for different environmental impacts; (iii) selection of a numerical calculation method based on the selected criteria. The research conducted in this paper provides a clear numerical calculation framework for DSM environmental impact and could be helpful to speed up the industrialization process of the DSM industry.

  2. Dynamic aspects of design and maintenance of the rotating machinery applied in the mining industry

    Directory of Open Access Journals (Sweden)

    Szolc Tomasz

    2017-01-01

    Full Text Available In the paper a dynamic behaviour of the selected typical group of rotating machines applied in the mining industry is investigated. These are the beater mills and crushers as well as blowers and compressors, all driven by the asynchronous motors. In particular, there is considered an influence of various types of machine working tool loadings on the system lateral steady-state dynamic responses as well as a mutual torsional electromechanical interaction between the driving motor and the driven machine in transient operational conditions. The theoretical calculations have been performed by means of the advanced structural mechanical models. The conclusions drawn from computational results can be very useful during design phase of these devices as well as helpful for their users during regular maintenance.

  3. SEASAT demonstration experiments with the offshore oil, gas and mining industries

    Science.gov (United States)

    Mourad, A. G.; Robinson, A. C.; Balon, J. E.

    1979-01-01

    Despite its failure, SEASAT-1 acquired a reasonable volume of data that can be used by industrial participants on a non-real-time basis to prove the concept of microwave sensing of the world's oceans from a satellite platform. The amended version of 8 experimental plans are presented, along with a description of the satellite, its instruments, and the data available. Case studies are summarized for the following experiments: (1) Beaufort Sea oil, gas, and Arctic operations; (2) Labrador Sea oil, gas, and sea ice; (3) Gulf of Mexico pipelines; (4) U.S. East Coast offshore oil and gas; (5) worldwide offshore drilling and production operations; (6) Equatorial East Pacific Ocean mining; (7) Bering Sea ice project; and (8) North Sea oil and gas.

  4. Applications of Seasat to the offshore oil, gas and mining industries

    Science.gov (United States)

    Mourad, A. G.; Robinson, A. C.

    1977-01-01

    The NASA satellite Seasat-A (to be launched in 1978) has applications to the offshore oil, gas, and mining industries including: (1) improvements in weather and wave forecasting, (2) studies of past wind and wave statistics for planning design requirements, and (3) monitoring ice formation, breakup, and movement in arctic regions. The primary geographic areas which will be monitored by Seasat-A include: the Beaufort Sea, the Labrador Sea, the Gulf of Mexico, the U.S. east coast, West Africa, Equatorial East Pacific, the Gulf of Alaska, and the North Sea. Seasat-A instrumentation used in ocean monitoring consists of a radar altimeter, a radar scatterometer, a synthetic aperture radar, a microwave radiometer, and a visible and infrared radiometer. The future outlook of the Seasat program is planned in three phases: measurement feasibility demonstration (1978-1980), data accessibility/utility demonstration (1980-1983), and operational system demonstration (1983-1985).

  5. Mining the metagenome of activated biomass of an industrial wastewater treatment plant by a novel method.

    Science.gov (United States)

    Sharma, Nandita; Tanksale, Himgouri; Kapley, Atya; Purohit, Hemant J

    2012-12-01

    Metagenomic libraries herald the era of magnifying the microbial world, tapping into the vast metabolic potential of uncultivated microbes, and enhancing the rate of discovery of novel genes and pathways. In this paper, we describe a method that facilitates the extraction of metagenomic DNA from activated sludge of an industrial wastewater treatment plant and its use in mining the metagenome via library construction. The efficiency of this method was demonstrated by the large representation of the bacterial genome in the constructed metagenomic libraries and by the functional clones obtained. The BAC library represented 95.6 times the bacterial genome, while, the pUC library represented 41.7 times the bacterial genome. Twelve clones in the BAC library demonstrated lipolytic activity, while four clones demonstrated dioxygenase activity. Four clones in pUC library tested positive for cellulase activity. This method, using FTA cards, not only can be used for library construction, but can also store the metagenome at room temperature.

  6. Environmental Management Practices and Firm Performance in a South African Mining Firm

    Directory of Open Access Journals (Sweden)

    Gibson Nyirenda

    2013-09-01

    Full Text Available This paper examines the impact of environmental management practices on the financial performance of a South African mining firm. The major aim of this paper is to investigate whether such practices have a close relationship with the mining firm’s financial performance (represented by return on equity [ROE]. The approach is a case study of a South African mining firm listed under the socially responsible index (SRI of the Johannesburg Stock Exchange (JSE. It uses Green-Steel sa (pseudonym used in place of the real name as a case study. Using multiple regression statistics, the return on equity of Green-Steel sa is regressed on three environmental management practices of Green- Steel (carbon reduction, energy efficiency, and water usage. The result shows there is no significant relationship between the variables and this lends credence to information gathered from Green-Steel environmental reports that Green-Steel’s environmental management practices are driven mostly by a desire to abide by regulations and also by a moral obligation to use environmental management practices to mitigate climate change impact.

  7. Maintenance service contract model for heavy equipment in mining industry using principal agent theory

    Science.gov (United States)

    Pakpahan, Eka K. A.; Iskandar, Bermawi P.

    2015-12-01

    Mining industry is characterized by a high operational revenue, and hence high availability of heavy equipment used in mining industry is a critical factor to ensure the revenue target. To maintain high avaliability of the heavy equipment, the equipment's owner hires an agent to perform maintenance action. Contract is then used to control the relationship between the two parties involved. The traditional contracts such as fixed price, cost plus or penalty based contract studied is unable to push agent's performance to exceed target, and this in turn would lead to a sub-optimal result (revenue). This research deals with designing maintenance contract compensation schemes. The scheme should induce agent to select the highest possible maintenance effort level, thereby pushing agent's performance and achieve maximum utility for both parties involved. Principal agent theory is used as a modeling approach due to its ability to simultaneously modeled owner and agent decision making process. Compensation schemes considered in this research includes fixed price, cost sharing and revenue sharing. The optimal decision is obtained using a numerical method. The results show that if both parties are risk neutral, then there are infinite combination of fixed price, cost sharing and revenue sharing produced the same optimal solution. The combination of fixed price and cost sharing contract results in the optimal solution when the agent is risk averse, while the optimal combination of fixed price and revenue sharing contract is obtained when agent is risk averse. When both parties are risk averse, the optimal compensation scheme is a combination of fixed price, cost sharing and revenue sharing.

  8. Sustainable Land Management in Mining Areas in Serbia and Romania

    Directory of Open Access Journals (Sweden)

    Vesna Popović

    2015-08-01

    Full Text Available The paper analyzes the impacts of mining activities on sustainable land management in mining areas in the Republic of Serbia and Romania and discusses the main challenges related to the management of these issues in legislation and practice. Particular attention is paid to land disturbance, mine waste management and land reclamation, as well as access to land for mining purposes, the transfer of mining royalties and the partnerships of the mining industry, governments, communities and civil society for sustainable mining. Both governments are willing to provide the adequate role to mining in strengthening the national economies, but they face numerous constraints in this matter. Sustainable mining practices and consistent implementation of the mining for the closure planning approach, within an improved legislative framework and in cooperation with stakeholders at all levels, create conditions for the development of creative, profitable, environmentally-sound and socially-responsible management and reuse of mine lands.

  9. Being a Child in an Industrial Contemporaneous Environment. Examples from the Mining Mountains of Cartagena-La Unión (Murcia

    Directory of Open Access Journals (Sweden)

    Óscar González Vergara

    2013-05-01

    Full Text Available This paper will discuss various aspects of childhood in an industrial environment, focusing particularly the phenomenon of child labor. We will draw examples from one of the most important industrial mining complex of contemporary Spain, the mining area in Cartagena-La Union, where child labor was widespread. We will complete this vision of childhood with the examples available in the mining songs, which reflect many aspects of childhood.

  10. New technology of bio-heap leaching uranium ore and its industrial application in Ganzhou uranium mine

    International Nuclear Information System (INIS)

    Fan Baotuan; Meng Yunsheng; Liu Jian; Meng Jin; Li Weicai; Xiao Jinfeng; Chen Sencai; Du Yuhai; Huang Bin

    2006-10-01

    Bioleaching mechanism of uranium ore is discussed. Incubation and selection of new strain, biomembrane oxidizing tank--a kind of new equipment for bacteria culture and oxidation regeneration of leaching agent are also introduced. The results of industrial experiment and industrial production are summarized. Compared with conventional heap leaching, bioleaching period and acid amount are reduced, oxidant and leaching agent are saved, and uranium concentration in leaching solution is increased. It is the first time to realize industrial production by bio-heap leaching in Chinese uranium mine. New equipment-biomembrane oxidizing tank give the basis of bio-heap leaching industrial application. Bio-heap leaching process is an effective technique to reform technique of uranium mine and extract massive low-content uranium ore in China. (authors)

  11. Application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator)

    1973-01-01

    The author has identified the following significant results. The most important result to date is the demonstration of the special value of repetitive ERTS-1 multiband coverage for detecting previously unknown fracture lineaments despite the presence of a deep glacial overburden. The Illinois Basin is largely covered with glacial drift and few rock outcrops are present. A contribution to the geological understanding of Illinois and Indiana has been made. Analysis of ERTS-1 imagery has provided useful information to the State of Indiana concerning the surface mined lands. The contrast between healthy vegetation and bare ground as imaged by Band 7 is sharp and substantial detail can be obtained concerning the extent of disturbed lands, associated water bodies, large haul roads, and extent of mined lands revegetation. Preliminary results of analysis suggest a reasonable correlation between image-detected fractures and mine roof fall accidents for a few areas investigated. ERTS-1 applications to surface mining operations appear probable, but further investigations are required. The likelihood of applying ERTS-1 derived fracture data to improve coal mine safety in the entire Illinois Basin is suggested from studies conducted in Indiana.

  12. Food Safety Practices in the Egg Products Industry.

    Science.gov (United States)

    Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

    2016-07-01

    We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

  13. Sustainable supply chain management practices in Indian automotive industry

    DEFF Research Database (Denmark)

    Mathivathanan, Deepak; Kannan, Devika; Haq, A. Noorul

    2018-01-01

    As one of the largest manufacturing sectors, the automotive industry has a deep impact on the society and environment. Automotive products provide mobility to millions and create jobs, but also threaten the environment. Consumer pressure, government regulations, and stakeholder demands for a comp......As one of the largest manufacturing sectors, the automotive industry has a deep impact on the society and environment. Automotive products provide mobility to millions and create jobs, but also threaten the environment. Consumer pressure, government regulations, and stakeholder demands...... into the traditional supply chain and that help an industry shift towards a sustainable supply chain are called SSCM practices. Firms have difficulty identifying the most useful practices and learning how these practices impact each other. Unfortunately, no existing research has studied the interrelated influences...... stakeholder perspectives are identified. The results reveal that management commitment towards sustainability and incorporating the triple bottom line approach in strategic decision making are the most influential practices for implementing the sustainable supply chain management. This study provides...

  14. Mine Water Treatment in Hongai Coal Mines

    OpenAIRE

    Dang Phuong Thao; Dang Vu Chi

    2018-01-01

    Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine ...

  15. A review of present research, research needs, and research capabilities related to the uranium mining and milling industry in Canada

    International Nuclear Information System (INIS)

    Woods, R.J.

    1981-01-01

    This report surveys the views of those associated with uranium mining in northern Saskatchewan on the research needs of the industry. Research resources, both human and material, available in the province are outlined. The author makes recommendations that would lead to a viable uranium research program. Appendices list information on current uranium-related research in Saskatchewan and available research resources

  16. Performance specifications for pack support types to cater for the variety of geotechnical areas encountered in the mining industry.

    CSIR Research Space (South Africa)

    Kullmann, D

    1999-03-01

    Full Text Available of packs. In order to complete this work, it was first deemed necessary to establish what types of packs are currently used in the mining industry, variations of these types and their prominence. Previous attempts at collecting this information had not been...

  17. Estimation of quantitative levels of diesel exhaust exposure and the health impact in the contemporary Australian mining industry

    NARCIS (Netherlands)

    Peters, Susan; de Klerk, Nicholas; Reid, Alison; Fritschi, Lin; Musk, Aw Bill; Vermeulen, Roel

    2017-01-01

    OBJECTIVES: To estimate quantitative levels of exposure to diesel exhaust expressed by elemental carbon (EC) in the contemporary mining industry and to describe the excess risk of lung cancer that may result from those levels. METHODS: EC exposure has been monitored in Western Australian miners

  18. Acid mine drainage neutralization in a pilot sequencing batch reactor using limestone from a paper and pulp industry

    CSIR Research Space (South Africa)

    Vadapalli, VRK

    2015-10-01

    Full Text Available This study investigated the implications of using two grades of limestone from a paper and pulp industry for neutralization of acid mine drainage (AMD) in a pilot sequencing batch reactor (SBR). In this regard, two grades of calcium carbonate were...

  19. WNA's Policy Document : sustaining global best practices in uranium, mining and processing, principles for managing radiation, health and safety, waste and the environment

    International Nuclear Information System (INIS)

    Saint-Pierre, S.; Waste Management and Decommissioning Working Group-WM and DW

    2008-01-01

    The worldwide community of uranium mining and processing recognizes that managing radiation, health and safety, waste and the environment is paramount. Such responsible management applies at all stages of planning and activities. Today we are acting to ensure that all parties directly involved in uranium mining and processing strive to achieve the highest levels of excellence in these fields. We are doing so by sustaining a strong safety culture based on a commitment to common, internationally shared principles. This paper sets out principles for the management of radiation, health and safety, waste and the environment applicable to sites throughout the world. In national and regional settings where nuclear fuel cycle activities are well developed, these principles already serve as the underpinning for 'Codes of Practice' that govern uranium mining and processing. In any given setting, a Code of Practice is needed to guide practical implementation of these principles according to the regional, national or site-specific context. These principles are published in the belief that they hold special relevance for emerging uranium producing countries that do not yet have fully developed regulations for the control of radiation, health and safety, waste and the environment associated with uranium mining and processing. The principles are equally relevant for operators, contractors, and regulators newly engaged in uranium mining and processing. Once national regulations are fully developed, they can be expected to embody these principles. Each principle affirmed here will not apply to the same extent for each party. Ultimately, the precise allocation of responsibilities must be set at the national and local levels. This document holds the status of a policy and ethical declaration by the full WNA membership, which the global nuclear industry. The principles affirmed here are supported by key relevant international organizations, including the IAEA and the global mining

  20. Human Resource Management Practice Tourism and Hotel Industry

    Directory of Open Access Journals (Sweden)

    Al Hrou S.A.

    2014-01-01

    Full Text Available Due to the importance of human resources management (HRM in promoting competitiveness in tourism and hotel industry, this review intend to enhance the understanding of practical issues of HRM more importantly since it involve organizing the management of human resources, with respect to accomplishment of organizational objective further more it shows that the issues either related to external factors, which include technological change, legislation and regulation, and national culture, globalization, or internal factors including size, industry and sector characteristic and structure of an organization, strategy and past practice of HRM. On the issue of human resources capability training, this research review recommend provision of array of opportunity for capability building and conducive working environment to promote productivity. Also worth considering, employee, employer relationship, Other variables such as attitude and productivity of employees, relationship between employees and employers, increase and decrease in financial assets should be taken into account.

  1. Operation of industrial electrical substations. Part II: practical applications

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Jimenez, Juan J; Zerquera Izquierdo, Mariano D; Beltran Leon, Jose S; Garcia Martinez, Juan M; Alvarez Urena, Maria V; Meza Diaz, Guillermo [Universidad de Guadalajara (Mexico)]. E-mails: cheosj@yahoo.com; mdzi@hotmail.com; beltran5601@yahoo.com.mx; jmargarmtz@yahoo.com; victory_alvarez@telmexmail.com; depmec@cucei.udg.mx

    2013-03-15

    The practical application of the methodology explained in Part 1 in a Cuban industry is the principal objective of this paper. The calculus of the economical operation of the principal transformers of the industrial plant is shown of the one very easy form, as well as the determination of the equations of the losses when the transformers operate under a given load diagram. It is calculated the state load which will be passed to the operation in parallel. [Spanish] El objetivo principal de este trabajo es la aplicacion practica de la metodologia, en una industria cubana, que se explico en la Parte 1. El calculo de la operacion economica de los principales transformadores de la planta industrial se muestra de una forma muy facil, asi como la determinacion de las ecuaciones de las perdidas cuando los transformadores operan bajo un diagrama de carga dado. Se calcula la carga de estado que se pasa a la operacion en paralelo.

  2. A Review of Data Mining with Big Data towards Its Applications in the Electronics Industry

    Directory of Open Access Journals (Sweden)

    Shengping Lv

    2018-04-01

    Full Text Available Data mining (DM with Big Data has been widely used in the lifecycle of electronic products that range from the design and production stages to the service stage. A comprehensive analysis of DM with Big Data and a review of its application in the stages of its lifecycle will not only benefit researchers to develop strong research themes and identify gaps in the field but also help practitioners for DM application system development. In this paper, a brief clarification of DM-related topics is presented first. A flowchart of DM and the main content of the flowchart steps are given in which commonly used data preparation and preprocessing approaches, DM functions and techniques, and performances indicators are summarized. Then, a comprehensive review covering 105 articles from 2007 to 2017 on DM or Big Data applications in the electronics industry is provided according to the flowchart from various points of view such as data handling, applications of DM, or Big Data at different lifecycle stages, and the software used in the applications. On this basis, a diagram of data content for different knowledge areas and a framework for DM and Big Data applications in the electronics industry are established. Finally, conclusions and future research directions are given.

  3. Review of data mining applications for quality assessment in manufacturing industry: support vector machines

    Directory of Open Access Journals (Sweden)

    Rostami Hamidey

    2015-01-01

    Full Text Available In many modern manufacturing industries, data that characterize the manufacturing process are electronically collected and stored in databases. Due to advances in data collection systems and analysis tools, data mining (DM has widely been applied for quality assessment (QA in manufacturing industries. In DM, the choice of technique to be used in analyzing a dataset and assessing the quality depend on the understanding of the analyst. On the other hand, with the advent of improved and efficient prediction techniques, there is a need for an analyst to know which tool performs better for a particular type of dataset. Although a few review papers have recently been published to discuss DM applications in manufacturing for QA, this paper provides an extensive review to investigate the application of a special DM technique, namely support vector machine (SVM to deal with QA problems. This review provides a comprehensive analysis of the literature from various points of view as DM concepts, data preprocessing, DM applications for each quality task, SVM preliminaries, and application results. Summary tables and figures are also provided besides to the analyses. Finally, conclusions and future research directions are provided.

  4. Valorization of mine rejects and industrial wastes for the recovery of some strategic and critical metals

    International Nuclear Information System (INIS)

    Sreenivas, T.; Dey, G K.; Anand Rao, K.

    2017-01-01

    Strategic and critical metals (SCM) resources form important components in safety and security design of any country. Uneven distribution of SCM resources as well as lack of technical expertise in manufacture of end-products makes many nations vulnerable to external pulls and pressures. India is making determined bid to surmount these difficulties by constantly upgrading its scientific and engineering expertise to address issues related to resources and materials manufacturing technologies. It is a well known fact that India is a resource starved country with respect to many of the strategic and critical metals (SCM). The demand for the SCM is met mostly by import of finished products and to a lesser extent by recycle of used products. In these days of growing inclination towards 'sustainable development' valorization of industrial waste for securing valuable metals including those of SCM category is worth pursuing, more so for a country like India. With this premise, we present in this paper representative case studies which depict technical feasibility of using industrial waste as a source for some important SCM, namely Nd, Y, Co and W. The wastes used for valorization are the mine tailings or rejects of different ores like copper, gold, uranium and fly ash generated from a coal-fired thermal power plant. (author)

  5. Undisclosed chemicals--implications for risk assessment: a case study from the mining industry.

    Science.gov (United States)

    Singh, Khareen; Oates, Christopher; Plant, Jane; Voulvoulis, Nikolaos

    2014-07-01

    Many of the chemicals used in industry can be hazardous to human health and the environment, and some formulations can have undisclosed ingredients and hazards, increasing the uncertainty of the risks posed by their use. The need for a better understanding of the extent of undisclosed information in chemicals arose from collecting data on the hazards and exposures of chemicals used in typical mining operations (copper, platinum and coal). Four main categories of undisclosed chemicals were defined (incomplete disclosure; chemicals with unspecific identities; relative quantities of ingredients not stated; and trade secret ingredients) by reviewing material safety data sheet (MSDS) omissions in previous studies. A significant number of chemicals (20% of 957 different chemicals) across the three sites had a range of undisclosed information, with majority of the chemicals (39%) having unspecific identities. The majority of undisclosed information was found in commercially available motor oils followed by cleaning products and mechanical maintenance products, as opposed to reagents critical to the main mining processes. All three types of chemicals had trade secrets, unspecific chemical identities and incomplete disclosures. These types of undisclosed information pose a hindrance to a full understanding of the hazards, which is made worse when combined with additional MSDS omissions such as acute toxicity endpoints (LD50) and/or acute aquatic toxicity endpoints (LC50), as well as inadequate hazard classifications of ingredients. The communication of the hazard information in the MSDSs varied according to the chemical type, the manufacturer and the regulations governing the MSDSs. Undisclosed information can undermine occupational health protection, compromise the safety of workers in industry, hinder risk assessment procedures and cause uncertainty about future health. It comes down to the duty of care that industries have towards their employees. With a wide range of

  6. Study of application of ERTS-1 imagery to fracture-related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E. (Principal Investigator); Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.

    1972-01-01

    The author has identified the following significant results. Numerous fractures are identifiable on the 1:120,000 color infrared photography. Some of these fractures are in the proximity of operating open pit mines and should provide opportunities for field checking and confirmation.

  7. Development of electric drive for centrifugal mine pumps in Solikamsk Potassium Mine Group Based on Industrial OMRON Controller

    Science.gov (United States)

    Kostarev, S. N.; Sereda, T. G.; Tatarnikova, N. A.; Kochetova, O. V.

    2018-03-01

    The electric drive for automation pumping out of filtration waters in the Second Solikamsk Potasssium Mine Group is developed. The emergency situation of flooding of the Mine has been considered in the course of development of the Upper Kama deposits of potash-magnesium salts. The functional scheme of automation of a drive of the pump is developed. The scheme is stipulated with manual and automatic control. To decrease the risk of flooding of mine, it is recommended to establish gauges of both bottom and top level control of a brine and other equipment in the collector of a brine: the gauge of measurementof a level, the gauge of the signal system of a level, the gauge of the pump control, the gauge of the signal system of a level with remote data transmission. For regulation of the charge of sewage, the P-regulator with the executive mechanism is stipulated. The ladder diagram of a pump control is developed to improve the work of centrifugal pumps and to prevent the cases of mines flooding.

  8. Environmental Reporting and Disclosure Practices - In Malaysian Property Industry

    OpenAIRE

    Natthondan, Shankari

    2009-01-01

    This research examined and analyzed the extent of environmental reporting and disclosure practices of the Kuala Lumpur Composite Index Companies (KLCI) as listed on the Bursa Malaysia on 21 January 2008. In particular the property industry companies were identified as a high profile sector as it is more sensitively exposed to environmental activities. The degree of reporting on environmental matters by this category of listed companies is indicative of the trend of the overall compliance and ...

  9. Instructional maps of safe working methods and practices for separate types of opera-tions conducted in the oil mine

    Directory of Open Access Journals (Sweden)

    И. В. Климова

    2017-06-01

    Full Text Available Instructing personnel in the issues of labor protection and industrial safety at hazardous facilities is one of the main tasks that face the employer; the quality with which this procedure is organized and carried out defines not only company’s indicators, but the mere possibility of its normal functioning. The paper contains a detailed overview of the typical content of standard documentation, which is currently used when conducting operations in the oil mines of Yarega high-viscosity oil deposit. Distinct features and unique nature of this oil field require special measures to guarantee safety of personnel and all facilities in general.The author proposes and reviews an additional type of operating guidelines – instructional map of safe working methods and practices. It is more illustrative than existing documentation (charts of inclined shaft development, labor protection regulations, which allows to upgrade the process of instructing personnel in the oil mines, to improve the quality of instructions and to reduce the risk of emergencies, accidents, industrial injuries.The author reviews the structure of suggested instructional map, offers a detailed arrangement diagram for the main thematic sections of the map, as well as their content. Instructional maps are regarded as a type of operating guidelines that include: description and characteristics of equipment, instruments and appliances; general safety requirements; content and execution sequence of operational elements with their graphical images; distribution of responsibilities with an indication of their priority in case the operations are conducted by several workers; specific safety requirements for equipment, materials, instruments, safety clothes and footwear, personal protective gear etc. (prohibitions, warnings.Advantages and disadvantages of proposed instructional maps of safe working methods and practices are highlighted.

  10. Coal mining in the power industry of the Federal Republic of Germany in 2016

    International Nuclear Information System (INIS)

    2017-11-01

    The contribution under consideration reports on the coal mining in the Federal Republic of Germany in the year 2016. Statistical data are presented for the power market and coal market, hard coal mining as well as the brown coal mining. These data consider the energy consumption in Germany, power production, iron and steel production, utilization, re-cultivation and employees.

  11. Coal mining in the power industry of the Federal Republic of Germany in 2015

    International Nuclear Information System (INIS)

    2016-11-01

    The contribution under consideration reports on the coal mining in the Federal Republic of Germany in the year 2015. Statistical data are presented for the power market and coal market, hard coal mining as well as the brown coal mining. These data consider the energy consumption in Germany, power production, iron and steel production, utilization, re-cultivation and employees.

  12. Selected problems of coal mining mechanization in the coal industry of Poland

    Energy Technology Data Exchange (ETDEWEB)

    Antoniak, J; Sikora, W [Politechnika Slaska, Gliwice (Poland)

    1987-01-01

    Discusses conditions for underground coal mining in Poland, types of equipment for coal cutting, mine haulage and strata control and development trends of mining technologies. In 1985, black coal output was 191.6 Mt; 85.3% came from longwall faces mined by sets of mining equipment (coal cutters, chain conveyors and powered supports). The average coal output per longwall face was 881 t/d, output per face mined by sets for mining equipment was 1,134 t/d. In 1985, 653 shearer loaders and 77 coal plows were used in Polish coal mines. Number of shearer loaders is increasing. Shearer loaders with chainless haulage system were safest and most economic. The shearer loaders were equipped with the POLTRAK chainless haulage system developed in Poland. Research programs concentrate on development of new mining equipment for thin seam mining, steep seam mining, longwall mining with hydraulic stowing, efficient strata control by powered or shield supports under conditions of increased stresses or rock burst hazards. 4 refs.

  13. Total quality management practices in Malaysia healthcare industry

    Science.gov (United States)

    Ahmad, Md Fauzi; Nee, Phoi Soo; Nor, Nik Hisyamudin Muhd; Wei, Chan Shiau; Hassan, Mohd Fahrul; Hamid, Nor Aziati Abdul

    2017-10-01

    The aim of total quality management (TQM) is to achieve customer satisfaction. Healthcare industry is very important in Malaysia for providing good healthcare services to public. However, failure to improve quality and efficiency is a big challenge in a healthcare industry in order to increase quality healthcare services. The objectives of this research are to identify the extent level of TQM implementation; and to determine the impact of TQM implementation on business sustainable in healthcare industry. Quantitative approach has been chosen as the methodology of this study. The survey respondents targeted in this research are staffs in Malaysia private clinic. 70 respondents have participated in this research. Data were analysed by Statistical Package Social Science (SPSS). Analysis result showed that there was a positive significant relationship between TQM practices and business sustainable (r=0.774, Prelationship with business sustainable factors. The findings of this research will help healthcare industry to understand a better and deeper valuable information on the impact of TQM implementation towards business sustainable in Malaysia healthcare industry.

  14. Development opportunities for northern aboriginal communities from Saskatchewan's uranium mining industry

    International Nuclear Information System (INIS)

    Richards, A.

    2003-01-01

    A. Richards, a public relations specialist from Cogema Resources Inc., discussed the programmes for human resource and community development in northern Saskatchewan. This region has the world's largest known high-grade deposits of uranium as well as a high level of provincial, public and northern community support. A mainly Aboriginal population of around 35 000 with a very high proportion of young persons entering the work force, lives in small, dispersed communities in a landscape of forest and lakes. All of the uranium mines are in remote locations with 'local impact' communities often several hundred kilometres away. In the late 1970's a public board of inquiry set none operating conditions that included maximizing opportunities for northern business and employment. Dozens of joint initiatives have since been developed and resulted in innovative hiring, training and transportation programmes, as well as support programmes to improve health, education, professional and business development and quality of life in the communities. Residents of northern Saskatchewan, like all other Canadians, are not prepared to accept environmental risks in return for economic opportunities. Three regional Environmental Quality Committees, with representatives froth all of the northern communities, work with Provincial agencies and the uranium mining industry to ensure community concerns are included in decisions. Northern hunters and fishermen, whose close links with the land are respected, provide relevant data to the Environmental Monitoring Program. Mutual trust is developed through constant interaction and dialogue in one-to-one relationships. Traditional activities like trapping are given their full importance. A Community Vitality Project jointly monitors social well being as defined by northern interests and culture. Compensations and company donations in some cases provide resources for community activities. (author)

  15. An Information Framework for Facilitating Cost Saving of Environmental Impacts in the Coal Mining Industry in South Africa

    Directory of Open Access Journals (Sweden)

    Mashudu D. Mbedzi

    2018-05-01

    Full Text Available Coal-mining contributes much to the economic welfare of a country. Yet it brings along a number of challenges, notably environmental impacts which include water pollution in a water scarce country such as South Africa. This research is conducted in two phases. The first phase intends to establish environmental and other challenges brought about by the coal-mining industry through a comprehensive analysis of available literature. Combatting these challenges is costly; consequently, our work investigates how established management accounting tools and techniques such as Environmental Management Accounting (EMA, Material Flow Cost Accounting (MFCA and Life Cycle Costing (LCC may facilitate cost savings for the companies involved. These techniques promote increased transparency of material usage by tracing and quantifying the flows and inventories of materials within the coal-mining industry in physical and monetary terms, hence hidden costs are elicited. The researchers postulate that an Information Framework integrating these aspects may be the way forward. To this end existing frameworks in the literature are identified. A number of research questions embodying the above aspects are defined and the objective is to define a conceptual framework to facilitate cost savings for coal-mining companies. The main contribution of this work is an information framework presented towards the end of this article. The second phase of the research will involve fieldwork in the form of a survey among stakeholders in industry to validate the conceptual framework.

  16. Systems analysis on the humanization of industrial life in the coal mining industry. Pt. 2. Results. Systemanalyse zur Humanisierung des Arbeitslebens im Steinkohlenbergbau. T. 2. Ergebnisse

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Volume No. 8 of the series of papers quantifies the system of aims, i.e. it defines synthetic data of laws and regulations of mining of DIN standards, and VDI guidelines, of generally accepted rules of engineering as well as of certified findings of industrial science as minimum requirements. This definition is followed by the examination of the type of medium-term development to be expected in the bituminous coal mining industry of the Ruhrkohle AG up to the year 1985. Then the general aims 1 and 2 given in volume No. 7 are described in detail. These descriptions constitute an excellent summary of the present state of knowledge concerning the improvement of working conditions in the bituminous coal mining industry. Finally, a study on the transferability of research findings is given. One statement is of special importance, i.e., that transferability is not characterized by technological feasibility alone which depends to a high degree on marginal, organizational conditions within the company, e.g., on the information system, on its hierarchical structure, on the company's policy, and on departamental policy. In this study, only the technological transferability is examined. To enable us to assess it, appropriate statements are made in a brief description of the research project carried out since 1974, which was sponsored within the action programme ''Humanization of Industrial Life''.

  17. Geochemistry and uranium content of phosphorites used in fertilizer industry - Homs in comparison with mines raw phosphorites

    International Nuclear Information System (INIS)

    Kudsi, Yahia; Abbas, Mahmoud

    1992-03-01

    geochemical characteristics of phosphates used in fertilizer industry at Homs were studied. 28 monthly averaged samples from Palmyrides mining areas were mineralogically and chemically analyzed for P 2 O 5 , CaO and U. Specifically, U content was determined by fluorometry, x-ray fluorescence and γ spectrometry. Results show that the phosphates under study are similar to that exploited at Charquieh mines. U shows a positive correlation with P 2 O 5 and not with CaO. Statistical analyses indicate that fluorometry is more accurate than x-ray fluorescence and γ spectrometry. (author). 14 refs., 23 figs., 5 tabs

  18. Innovation Level of Sustainable Practices Adopted in Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Simone Sehnem

    2016-07-01

    Full Text Available This research aimed to identify the level of innovation of sustainable practices by industrial companies. This is a descriptive study that made use of a questionnaire answered by 50 industrial companies. The results show that environmental practices at full level by 68% of businesses are monitoring the risks and opportunities for the organization's activities due to climate change; 56% of companies surveyed are waste separation; followed by the realization of related health and safety training at work in 52% of cases surveyed; and 48% monitoring and recording of injuries, the injury rate, the rate of occupational diseases, lost days, absenteeism and number of work-related fatalities for all workers. Among the practices adopted not stand out incineration (burning mass (80% of companies surveyed; hiring indigenous and tribal employees (68%; composting (64% and use of surface water in the process. Therefore, the study contributed to the disclosure cleaner called production innovations and also pipe end technologies. Some social practices that signal a commitment of the organizations with human resources and the humanization and also economical focused on continuous improvement.

  19. Assessment of the mining practices effects on the water quality in the Ibar river within the Leposavić municipality

    Directory of Open Access Journals (Sweden)

    Milentijević Gordana

    2010-01-01

    Full Text Available Exploitation, development and primary extraction of the minerals result in release of the harmful substances, e.g. heavy metals, toxic gases, dirt, etc, that are often uncontrolled deposit in the environment. Those deposited and overlooked substances remain as a heritage and challenge for the coming generations that would involve abundant human, technical and financial resources for the environmental reclamation. The mining activities of the Trepča - RIF Kopaonik has both positive and negative influences within the Leposavić municipality, i.e., industrial development and environmental degradation. As a result of the mining activities the air, land and water resources both surface and underground are severely polluted. The main objective of this paper is to present adverse effects of the mineral resources (lead and zinc exploitation and primary extraction on the Ibar River water quality degradation mainly by heavy metals. Since the heavy metals are frequently ingested by the people through the food chain and given the high toxicity of them they are crucial parameters for the water quality monitoring practices that should be carefully assessed and controlled. Thus this paper includes comprehensive analyses of the heavy metals concentration (Pb, Zn, Cu, Cd and Fe in the Ibar River within the Leposavić municipality.

  20. Housing and occupational health and safety in the South African mining industry, part 2

    CSIR Research Space (South Africa)

    Lewis, P

    2003-12-01

    Full Text Available (including contractors) staying in this accommodation Single-sex hostels ("bachelor" accommodation) 66% 46% Family hostel accommodation 45% 6% Single flats on mine 21% 2% Living out allowance from mine (fringe benefit for off-mine accommodation... Of Employees Sharing A Hostel Room Percentage Of All Single-Sex Hostel Dwellers In The Sample mines Number Of Mines 2 6 15 3-4 12 11 5-6 16 6 7-8 65 14 9+ 1 1 TOTAL 100% - 9 The two most common arrangements were therefore single-sex hostel...

  1. The Contribution of Individual, Social and Work Characteristics to Employee Mental Health in a Coal Mining Industry Population.

    Directory of Open Access Journals (Sweden)

    Robyn Considine

    Full Text Available Evidence regarding the extent of mental health problems and the associated characteristics within an employee population is necessary to inform appropriate and tailored workplace mental health programs. Mental health within male dominated industries (such as mining has received recent public attention, chiefly through observations regarding suicide in such populations in Australia and internationally. Currently there is limited empirical evidence regarding the mental health needs in the mining industry as an exemplar of a male dominated workforce, and the relative contribution to such problems of individual, socio-economic and workplace factors. This study aimed to investigate the mental health and associated characteristics among employees in the Australian coal mining industry with a specific focus on identifying modifiable work characteristics.A cross-sectional study was conducted among employees (n = 1457 across eight coal mines stratified by key mine characteristics (state, mine type and employee commute arrangements. Participants completed measures of psychological distress (K10+ and key variables across four categories (socio-demographic characteristics, health history, current health behaviours, work attitudes and characteristics.Psychological distress levels within this sample were significantly higher in comparison with a community sample of employed Australians. The following factors contributed significantly to levels of psychological distress using hierarchical linear regression analysis: lower social networks; a past history of depression, anxiety or drug/alcohol problems; high recent alcohol use; work role (managers and a set of work characteristics (level of satisfaction with work, financial factors and job insecurity; perception of lower workplace support for people with mental health problems.This is the first study to examine the characteristics associated with mental health problems in the Australian coal mining industry. The

  2. The Contribution of Individual, Social and Work Characteristics to Employee Mental Health in a Coal Mining Industry Population.

    Science.gov (United States)

    Considine, Robyn; Tynan, Ross; James, Carole; Wiggers, John; Lewin, Terry; Inder, Kerry; Perkins, David; Handley, Tonelle; Kelly, Brian

    2017-01-01

    Evidence regarding the extent of mental health problems and the associated characteristics within an employee population is necessary to inform appropriate and tailored workplace mental health programs. Mental health within male dominated industries (such as mining) has received recent public attention, chiefly through observations regarding suicide in such populations in Australia and internationally. Currently there is limited empirical evidence regarding the mental health needs in the mining industry as an exemplar of a male dominated workforce, and the relative contribution to such problems of individual, socio-economic and workplace factors. This study aimed to investigate the mental health and associated characteristics among employees in the Australian coal mining industry with a specific focus on identifying modifiable work characteristics. A cross-sectional study was conducted among employees (n = 1457) across eight coal mines stratified by key mine characteristics (state, mine type and employee commute arrangements). Participants completed measures of psychological distress (K10+) and key variables across four categories (socio-demographic characteristics, health history, current health behaviours, work attitudes and characteristics). Psychological distress levels within this sample were significantly higher in comparison with a community sample of employed Australians. The following factors contributed significantly to levels of psychological distress using hierarchical linear regression analysis: lower social networks; a past history of depression, anxiety or drug/alcohol problems; high recent alcohol use; work role (managers) and a set of work characteristics (level of satisfaction with work, financial factors and job insecurity; perception of lower workplace support for people with mental health problems. This is the first study to examine the characteristics associated with mental health problems in the Australian coal mining industry. The findings

  3. Tools for organisational risk evaluation for occupational health stressors (OREOHS) for the small-scale mining industry

    CSIR Research Space (South Africa)

    Edwards, AL

    2009-07-01

    Full Text Available access to knowledge and tools that will raise awareness and disseminate affordable, best practice methods for use by small-scale mines. With this in mind, the CSIR Occupational Health and Ergonomics research group have developed the OREOHS tool which is a...

  4. Widespread waterborne pollution in central Swedish lakes and the Baltic Sea from pre-industrial mining and metallurgy.

    Science.gov (United States)

    Bindler, Richard; Renberg, Ingemar; Rydberg, Johan; Andrén, Thomas

    2009-07-01

    Metal pollution is viewed as a modern problem that began in the 19th century and accelerated through the 20th century; however, in many parts of the globe this view is wrong. Here, we studied past waterborne metal pollution in lake sediments from the Bergslagen region in central Sweden, one of many historically important mining regions in Europe. With a focus on lead (including isotopes), we trace mining impacts from a local scale, through a 120-km-long river system draining into Mälaren--Sweden's third largest lake, and finally also the Baltic Sea. Comparison of sediment and peat records shows that pollution from Swedish mining was largely waterborne and that atmospheric deposition was dominated by long-range transport from other regions. Swedish ore lead is detectable from the 10th century, but the greatest impact occurred during the 16th-18th centuries with improvements occurring over recent centuries, i.e., historical pollution > modern industrial pollution.

  5. Intensifying waste water clarification in heavy and mining industries for sanitation of rivers in the Katowice district

    Energy Technology Data Exchange (ETDEWEB)

    Paluch, J.; Twardowska, I.

    1976-01-01

    This article presents a detailed account of the state of water pollution in the main and tributary rivers of the heavily populated and industrialized district of Katowice, Poland: Results of surveys in the years 1969 to 1972 are given. Several tables and maps show the degree of water pollution in rivers, the amount to which the values exceed pollution standards, percentage of treated and untreated industrial waste water entering the rivers, the classification of river sections according to their content of suspensions, phenols and salt. Further figures show the effectiveness of water cleaning flocculating agents and of waste water treatment at coking plants. Black coal mining and processing contributes the greater part to pollution of the rivers. Only 54% of mining industry waste water is cleaned mechanically and 3% chemically. The amount of 3,300 t/d of chlorite and sulfate salts is led into the rivers primarily from the Rybnik coal mining area. The clarification of waste water resulting from hydraulic stowing and from flotation processes is described as most problematic. Research efforts are being made at economic desalination and suspension flocculation. In the coking industry waste water is treated in 88% of the plants, but dephenolization takes place in only 50% of the plants. (29 refs.) (In German)

  6. Analyzing solid waste management practices for the hotel industry

    Directory of Open Access Journals (Sweden)

    S.T. Pham Phu

    2018-01-01

    Full Text Available The current study aims to analyze waste characteristics and management practices of the hotel industry in Hoi An, a tourism city in the center of Vietnam. Solid wastes from 120 hotels were sampled, the face-to-face interviews were conducted, and statistical methods were carried out to analyze the data. The results showed that the mean of waste generation rate of the hotels was 2.28 kg/guest/day and strongly correlated to internal influencing factors such as the capacity, the price of the room, garden, and level of restaurant. The differences in waste generation rate of the hotels were proved to be statistically significant. The higher the scale of hotels, the higher the waste generation rate. Moreover, the waste composition of the hotels was identified by 58.5% for biodegradable waste, 25.8% for recyclables and 15.7% for others. The relative differences in the waste composition of the hotels by climate, the features of hotels, and the types of the guest were explained. Whereby, the higher size of the hotels, the higher percentage of biodegradable and less proportion of recyclable waste. Also, this study revealed that the implementation status of waste management practices of the hoteliers initially reaped quite positive achievements with 76% for sorting, 39% for recycling, 29% for reduction, and 0.8% for composting. The rate of waste management practices was proportional to the scale of the hotel. This study provided information on waste management practice of hotel industry and contributed to the overall assessment of municipal solid waste management practices of Hoi An city.

  7. Highly-productive mechanization systems for coal mining in the Polish coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, W

    1985-01-01

    Effects of mechanization on underground coal mining in Poland from 1960 to 1980 and mining equipment used in Poland is reviewed. In 1983 black coal output increased to 191.1 Mt. There were 765 working faces, 442 of which with powered supports. Six hundred thirty-four shearer loaders were in use. About 82.7% of coal output fell on faces mined by sets of mining equipment (shearer loaders, powered supports and chain conveyors). The average coal output per working face amounted to 889 t/d. About 50% of mine roadways was driven by heading machines (346 heading machines were in use). The average coal output per face mined by a set of mining equipment amounted to 1248 t/d. About 86% of shearer loaders fell on double drum shearer loaders. Types of mining equipment used in underground mining are reviewed: powered supports (Pioma, Fazos, Glinik and the SOW), shearer loaders (drum shearer loaders and double-drum shearer loaders with chain haulage and chainless haulage systems for unidirectional and bi-directional mining), chain conveyors (Samson, Rybnik). Statistical data on working faces with various sets of equipment are given. 3 references.

  8. Information system for preserving culture heritage in areas affected by heavy industry and mining

    Science.gov (United States)

    Pacina, Jan; Kopecký, Jiří; Bedrníková, Lenka; Handrychová, Barbora; Švarcová, Martina; Holá, Markéta; Pončíková, Edita

    2014-05-01

    The natural development of the Ústí region (North-West Bohemia, the Czech Republic) has been affected by the human activity during the past hundred years. The heavy industrialization and the brown coal mining have completely changed the land-use in the region. The open-pit coal mines are completely destroying the surrounding landscape, including settlement, communications, hydrological network and the over-all natural development of the region. The other factor affecting the natural development of the landscape, land-use and settlement was the political situation in 1945 (end of the 2nd World War) when the borderland was depopulated. All these factors caused vanishing of more than two hundreds of colonies, villages and towns during this period of time. The task of this project is to prepare and offer for public use a comprehensive information system preserving the cultural heritage in the form of processed old maps, aerial imagery, land-use and georelief reconstructions, local studies, text and photo documents covering the extinct landscape and settlement. Wide range of various maps was used for this area - Müller's map of Bohemia (ca. 1720) followed by the 1st, 2nd and 3rd Military survey of Habsburg empire (1792, 1894, 1938), maps of Stabile cadaster (ca. 1840) and State map derived in the scale 1:5000 (1953, 1972, 1981). All the maps were processed, georeferenced, hand digitized and are further used as base layers for visualization and analysis. The historical aerial imagery was processed in standard ways of photogrammetry and is covering the year 1938, 1953 and the current state. The other important task covered by this project is the georelief reconstruction. We use the old maps and aerial imagery to reconstruct the complete time-line of the georelief development. This time-line is covering the period since 1938 until now. The derived digital terrain models and further on analyzed and printed on a 3D printer. Other reconstruction task are performed using

  9. A practice of ultra-fine tailings disposal as filling material in a gold mine.

    Science.gov (United States)

    Deng, D Q; Liu, L; Yao, Z L; Song, K I-I L; Lao, D Z

    2017-07-01

    A practice of cemented backfill technology with ultra-fine tailings in a gold mine was comprehensively presented, and a series of tests were conducted in accordance with the peculiar properties of ultra-fine tailings and the mining technology conditions. The test results show that, the tailings from Shuiyindong Gold Mine have a great grinding fineness, with the average particle diameter 22.03 μm, in which the ultra-fine particles with the diameter below 20 μm occupying 66.13%. The analysis results of chemical components of tailings indicate that the content of SiO 2 is relatively low, i.e., 33.08%, but the total content of CaO, MgO and Al 2 O 3 is relatively high i.e., 36.5%. After the settlement of 4-6 h, the tailing slurry with the initial concentration of 40% has the maximum settling concentration of 54.692%, and the corresponding maximum settling unit weight is 1.497 g/cm 3 . During the field application, the ultra-fine tailings and PC32.5 cement were mixed with the cement-tailings ratios of 1:3-1:8, and the slurry concentration of 50 wt% was prepared. Using the slurry pump, the prepared cemented backfill slurries flowed into the goaf, and then the strength of the cemented backfill body met the mining technique requirements in Shuiyindong Gold Mine, where the ore body has a smooth occurrence, with the average thickness of approximately 2 m and the inclination angle ranging from 5 to 10°. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Theory and Practice Meets in Industrial Process Design -Educational Perspective-

    Science.gov (United States)

    Aramo-Immonen, Heli; Toikka, Tarja

    Software engineer should see himself as a business process designer in enterprise resource planning system (ERP) re-engineering project. Software engineers and managers should have design dialogue. The objective of this paper is to discuss the motives to study the design research in connection of management education in order to envision and understand the soft human issues in the management context. Second goal is to develop means of practicing social skills between designers and managers. This article explores the affective components of design thinking in industrial management domain. In the conceptual part of this paper are discussed concepts of network and project economy, creativity, communication, use of metaphors, and design thinking. Finally is introduced empirical research plan and first empirical results from design method experiments among the multi-disciplined groups of the master-level students of industrial engineering and management and software engineering.

  11. Safety practices in Jordanian manufacturing enterprises within industrial estates.

    Science.gov (United States)

    Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

    2013-01-01

    This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

  12. Evaluating Industry Payments Among Dermatology Clinical Practice Guidelines Authors.

    Science.gov (United States)

    Checketts, Jake X; Sims, Matthew Thomas; Vassar, Matt

    2017-12-01

    It is well documented that financial conflicts of interest influence medical research and clinical practice. Prior to the Open Payments provisions of the Affordable Care Act, financial ties became apparent only through self-disclosure. The nature of financial interests has not been studied among physicians who develop dermatology clinical practice guidelines. To evaluate payments received by physicians who author dermatology clinical practice guidelines, compare disclosure statements for accuracy, determine whether pharmaceutical companies from which the authors received payments manufactured products related to the guidelines, and examine the extent to which the American Academy of Dermatology enforced their Administrative Regulations for guideline development. Three American Academy of Dermatology guidelines published from 2013 to 2016 were retrieved. Double data extraction was used to record financial payments received by 49 guideline authors using the Open Payments database. Payments received by the authors from the date of the initial literature search to the date of publication were used to evaluate disclosure statement accuracy, detail the companies providing payments, and evaluate Administrative Regulations enforcement. This study is applicable to clinical practice guideline panels drafting recommendations, physicians using clinical practice guidelines to inform patient care, and those establishing policies for guideline development. Our main outcomes are the monetary values and types of payments received by physicians who author dermatology guidelines and the accuracy of disclosure statements. Data were collected from the Open Payments database and analyzed descriptively. Of the 49 authors evaluated, 40 received at least 1 reported industry payment, 31 accepted more than $1000, 25 accepted more than $10 000, and 18 accepted more than $50 000. Financial payments amounted to a mean of $157 177 per author. The total reimbursement among the 49 authors

  13. Polonium content in sediments and other solid tailings generated by mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Chmielewska, Izabela; Michalik, Boguslaw [Silesian Centre for Environmental Radioactivity, Central Mining Institute, 40-166 Katowice, Pl. Gwarkow 1 (Poland)

    2014-07-01

    All legal limits or recommendations concerning NORM include only primordial radionuclides and secular equilibrium state among all decay products is assumed. This is not valid for a majority of residues from NORM industry where activity concentration of progenies can substantially differ each other. Upper Silesia Coal Basin is a unique region where mining activity is continuously done over longer period of time and this include discharging of radium-bearing water to environment and creating huge amount of solid wastes where at the beginning radium is the most dominant radionuclide. With time other daughter products start to build up and actual exposure to radiation is changing. One of them is polonium that with regard to its chemical properties can be easily accumulated in non-human biota resulting in the increase of radiation exposure. In our work we focused attention on sediments where content of {sup 210}Po was determined by chemical separation followed by alpha spectrometry. Chemical preparation involves organic matter destruction and dissolution of the sample itself (if possible). In our research we employed wet digestion by means of mixture of concentrated acids: HNO{sub 3}, HClO{sub 4}, HCl. Later on polonium was spontaneously deposited onto silver disc and measured with use of alpha spectrometry. In this article we want to show results of our study and as well to present some conclusions concerning changes in radiation risk assessment when actual concentration of polonium is taken into consideration. (authors)

  14. Laser cladding of tungsten carbides (Spherotene) hardfacing alloys for the mining and mineral industry

    International Nuclear Information System (INIS)

    Amado, J.M.; Tobar, M.J.; Alvarez, J.C.; Lamas, J.; Yanez, A.

    2009-01-01

    The abrasive nature of the mechanical processes involved in mining and mineral industry often causes significant wear to the associated equipment and derives non-negligible economic costs. One of the possible strategies to improve the wear resistance of the various components is the deposition of hardfacing layers on the bulk parts. The use of high power lasers for hardfacing (laser cladding) has attracted a great attention in the last decade as an alternative to other more standard methods (arc welding, oxy-fuel gas welding, thermal spraying). In laser cladding the hardfacing material is used in powder form. For high hardness applications Ni-, Co- or Fe-based alloys containing hard phase carbides at different ratios are commonly used. Tungsten carbides (WC) can provide coating hardness well above 1000 HV (Vickers). In this respect, commercially available WC powders normally contain spherical micro-particles consisting of crushed WC agglomerates. Some years ago, Spherotene powders consisting of spherical-fused monocrystaline WC particles, being extremely hard, between 1800 and 3000 HV, were patented. Very recently, mixtures of Ni-based alloy with Spherotene powders optimized for laser processing were presented (Technolase). These mixtures have been used in our study. Laser cladding tests with these powders were performed on low carbon steel (C25) substrates, and results in terms of microstructure and hardness will be discussed

  15. study of solid-liquid flow regimes in mining industry using gamma radiation

    International Nuclear Information System (INIS)

    Salgado, Cesar M.; Brandao, Luis E.B.; Nunes, Rogerio C.; Nascimento, Ana C. de H.; Salgado, William L.

    2013-01-01

    One of the most promising areas in the mining industry is the development of devices for measuring solid mass flowrate in pipelines, mainly in transportation of ore. These units are composed of interconnected pipes where transport of the material is accomplished by pumps capable of driving the ore pellets using water. One of the problems inherent in these systems is the stratification if a critical velocity is reached, the ore pellets begin to sediment at the bottom of the pipe and it may block the system. The solid phase displacement behavior depends on a number of factors (water flowrate, density, pipe diameter, average size of the pellet) which makes the flow regime knowledge essential to the appropriate operation of the system. An apparatus to evaluate the stratification level through of particle (ore pellets) spatial distributions inside the pipe is important because it increases the safety condition of pumping and transportation of solid phase. Therefore, this work presents a study to optimize the geometrical parameters for the identification of a possible stratification of the solid phase inside a pipeline. The detection system uses different NaI(Tl) detectors and gamma ray sources (fan beam geometry), adequately positioned in order to calculate transmitted and scattered beams. Additionally, theoretical models for different flow regimes (homogeneous and stratified) have been developed using MCNP-X mathematical code. (author)

  16. Finding occupational accident patterns in the extractive industry using a systematic data mining approach

    International Nuclear Information System (INIS)

    Silva, Joaquim F.; Jacinto, Celeste

    2012-01-01

    This paper deals with occupational accident patterns of in the Portuguese Extractive Industry. It constitutes a significant advance with relation to a previous study made in 2008, both in terms of methodology and extended knowledge on the patterns’ details. This work uses more recent data (2005–2007) and this time the identification of the “typical accident” shifts from a bivariate, to a multivariate pattern, for characterising more accurately the accident mechanisms. Instead of crossing only two variables (Deviation x Contact), the new methodology developed here uses data mining techniques to associate nine variables, through their categories, and to quantify the statistical cohesion of each pattern. The results confirmed the “typical accident” of the 2008 study, but went much further: it reveals three statistically significant patterns (the top-3 categories in frequency); moreover, each pattern includes now more variables (4–5 categories) and indicates their statistical cohesion. This approach allowed a more accurate vision of the reality, which is fundamental for risk management. The methodology is best suited for large groups, such as national Authorities, Insurers or Corporate Groups, to assist them planning target-oriented safety strategies. Not least importantly, researchers can apply the same algorithm to other study areas, as it is not restricted to accidents, neither to safety.

  17. Laser cladding of tungsten carbides (Spherotene) hardfacing alloys for the mining and mineral industry

    Energy Technology Data Exchange (ETDEWEB)

    Amado, J.M. [Departamento de Ingenieria Industrial II, Universidade da Coruna, Mendizabal s/n, Ferrol E-15403 (Spain); Tobar, M.J. [Departamento de Ingenieria Industrial II, Universidade da Coruna, Mendizabal s/n, Ferrol E-15403 (Spain)], E-mail: cote@udc.es; Alvarez, J.C.; Lamas, J.; Yanez, A. [Departamento de Ingenieria Industrial II, Universidade da Coruna, Mendizabal s/n, Ferrol E-15403 (Spain)

    2009-03-01

    The abrasive nature of the mechanical processes involved in mining and mineral industry often causes significant wear to the associated equipment and derives non-negligible economic costs. One of the possible strategies to improve the wear resistance of the various components is the deposition of hardfacing layers on the bulk parts. The use of high power lasers for hardfacing (laser cladding) has attracted a great attention in the last decade as an alternative to other more standard methods (arc welding, oxy-fuel gas welding, thermal spraying). In laser cladding the hardfacing material is used in powder form. For high hardness applications Ni-, Co- or Fe-based alloys containing hard phase carbides at different ratios are commonly used. Tungsten carbides (WC) can provide coating hardness well above 1000 HV (Vickers). In this respect, commercially available WC powders normally contain spherical micro-particles consisting of crushed WC agglomerates. Some years ago, Spherotene powders consisting of spherical-fused monocrystaline WC particles, being extremely hard, between 1800 and 3000 HV, were patented. Very recently, mixtures of Ni-based alloy with Spherotene powders optimized for laser processing were presented (Technolase). These mixtures have been used in our study. Laser cladding tests with these powders were performed on low carbon steel (C25) substrates, and results in terms of microstructure and hardness will be discussed.

  18. OVERVIEW ON A NEW MODEL OF CALCULATION OF COSTRILOR IN MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    DINA IONELA-CLAUDIA

    2015-03-01

    Full Text Available The methods of calculation used in the coal mining industry entities (global and per-phase, non-postoperative, and also as the main drawback of applying their lack of foresight and readiness. This makes the information in connection with the production process do not reach decision makers in time for them to take the most appropriate decision, on the one hand, and on the other hand, do not have the prospect of future development of the production process, so management accounting does not fulfill its role of managerial accounting. In this vision, I propose the establishment of management of the production process that uses as its objective "the cost". Target calculation system is expected to be made up of a set of methods, techniques and means with which to accurately predict and programme production costs, to calculate the cost of an hour of activity, to register and to consider pre-emptive, operative and post operative expenses compared to the deviations of their standard or normed and, on this basisto determine the actual cost of production at the end of each cycle of activity

  19. Public health implications of changing patterns of recruitment into the South African mining industry, 1973–2012: a database analysis

    Directory of Open Access Journals (Sweden)

    Rodney Ehrlich

    2017-08-01

    Full Text Available Abstract Background The triple epidemic of silicosis, tuberculosis and HIV infection among migrant miners from South Africa and neighbouring countries who have worked in the South African mining industry is currently the target of regional and international control efforts. These initiatives are hampered by a lack of information on this population. Methods This study analysed the major South African mining recruitment database for the period 1973 to 2012 by calendar intervals and demographic and occupational characteristics. Changes in area of recruitment were mapped using a geographic information system. Results The database contained over 10 million contracts, reducible to 1.64 million individuals. Major trends relevant to health projection were a decline in gold mining employment, the major source of silicosis; increasing recruitment of female miners; and shifts in recruitment from foreign to South African miners, from the Eastern to the Northwestern parts of South Africa, and from company employees to contractors. Conclusions These changes portend further externalisation of the burden of mining lung disease to home communities, as miners, particularly from the gold sector, leave the industry. The implications for health, surveillance and health services of the growing number of miners hired as contractors need further research, as does the health experience of female miners. Overall, the information in this report can be used for projection of disease burden and direction of compensation, screening and treatment services for the ex-miner population throughout Southern Africa.

  20. Public health implications of changing patterns of recruitment into the South African mining industry, 1973-2012: a database analysis.

    Science.gov (United States)

    Ehrlich, Rodney; Montgomery, Alex; Akugizibwe, Paula; Gonsalves, Gregg

    2017-08-03

    The triple epidemic of silicosis, tuberculosis and HIV infection among migrant miners from South Africa and neighbouring countries who have worked in the South African mining industry is currently the target of regional and international control efforts. These initiatives are hampered by a lack of information on this population. This study analysed the major South African mining recruitment database for the period 1973 to 2012 by calendar intervals and demographic and occupational characteristics. Changes in area of recruitment were mapped using a geographic information system. The database contained over 10 million contracts, reducible to 1.64 million individuals. Major trends relevant to health projection were a decline in gold mining employment, the major source of silicosis; increasing recruitment of female miners; and shifts in recruitment from foreign to South African miners, from the Eastern to the Northwestern parts of South Africa, and from company employees to contractors. These changes portend further externalisation of the burden of mining lung disease to home communities, as miners, particularly from the gold sector, leave the industry. The implications for health, surveillance and health services of the growing number of miners hired as contractors need further research, as does the health experience of female miners. Overall, the information in this report can be used for projection of disease burden and direction of compensation, screening and treatment services for the ex-miner population throughout Southern Africa.

  1. Best practice asset management in the nuclear industry

    International Nuclear Information System (INIS)

    Maxey, Terry M.

    2004-01-01

    Pursuit of operational excellence is the goal of every nuclear plant operator. Implementation of Enterprise Asset Management(EAM) solutions in the nuclear industry has significantly contributed to record performance over the last decade in the areas of reliability and production, nuclear and personnel safety, and production cost. This presentation will outline the scope of best practice EAM implementation and highlight performance results achieved from EAM deployment. It will also explore areas of future opportunity in which EAM solutions will support an era of new nuclear plant construction in the United States

  2. Analyzing solid waste management practices for the hotel industry

    OpenAIRE

    S.T. Pham Phu; M.G. Hoang; T. Fujiwara

    2018-01-01

    The current study aims to analyze waste characteristics and management practices of the hotel industry in Hoi An, a tourism city in the center of Vietnam. Solid wastes from 120 hotels were sampled, the face-to-face interviews were conducted, and statistical methods were carried out to analyze the data. The results showed that the mean of waste generation rate of the hotels was 2.28 kg/guest/day and strongly correlated to internal influencing factors such as the capacity, the price of the room...

  3. Intelligent Mining Engineering Systems in the Structure of Industry 4.0

    OpenAIRE

    Rylnikova Marina; Radchenko Dmitriy; Klebanov Dmitriy

    2017-01-01

    The solution of the problem of improving the human environment and working conditions at mines is based on the provision of the rationale of parameters and conditions for the implementation of an environmentally balanced cycle of comprehensive development of mineral deposits on the basis of the design of mining engineering systems characterized by the minimization of the human factor effect in danger zones of mining operations. In this area, robotized technologies are being developed, machine...

  4. Trophic priorities of millipedes (Diplopoda in process of rehabilitation of the territories disturbed by mining industry

    Directory of Open Access Journals (Sweden)

    Y. L. Kulbachko

    2012-07-01

    Full Text Available The food selectivity of millipedes (Diplopoda was studied in different variants of mine spoils and chernozem fillings applied as topsoil. It was found that the ordinary chernozem fillings determines the formation of food priorities increasingly in comparison with the mine spoil. There are shown statistically significant differences between millipeds food priorities depending on the proposed feed: litter leaves of trees (Acer platanoides, Robinia pseudoacacia, Juniperus virginiana used in forest revegetation of mining lands.

  5. Exclusion, exemption and clearance in the mining and minerals industry - A review of the concepts from a South African perspective

    International Nuclear Information System (INIS)

    Selby, J.H.

    1997-01-01

    The risks from mining and processing of ores is reviewed on a generic basis with particular reference to some of the confusions which can arise due to lack of consistency or common logic in the use of exclusion, exemption and clearance. The difference in exclusion and exemption are challenged by comparing doses received in high background radiation areas and the doses received from a mining practice. The common principle of risk to the human species is not applied consistently. The differences between IAEA recommendations and local regulatory conditions are compared, and the use of exemption levels as clearance levels is considered. A case study on management of mine tailings is presented with special focus on the use of clearance levels. In all areas of review the interpretation of regulation is subject to confusion resulting from inconsistencies which can distort free market economics. (author)

  6. Uranium mining: industry performance will continue to be driven by trends in the output and price or uranium

    International Nuclear Information System (INIS)

    2006-01-01

    Industry revenue, which rose very strongly in the mid 2000s on the back of higher prices and higher production, is expected to retreat during the outlook i period. Indications are that a small gain in real industry revenue will be made in 2007-08, reflecting slightly higher output and some- what higher Australian dollar contract prices. However, real industry revenue is then expected to fall over the remaining years of the out- , look period, as output and exports edge lower and prices ease. Production from Ranger is expected to ease as mining winds down and the operation becomes ore processing only, and no new mines or mine expansions will come on stream over this relatively short period. Large increases in spot uranium prices in the mid 2000s were driven by falling uranium stocks, increased concern over future uranium supplies and growing speculative demand for uranium. Despite very large price rises, world uranium production responded only slowly, reflect-ing the long lead-time required to either expand existing operations or bring new developments on stream

  7. Industrial wastewater treatment using higher aquatic vegetation in the former mining company of the Far Eastern Federal district

    Science.gov (United States)

    Krupskaya, L. T.; Zvereva, V. P.; Gula, K. E.; Gul', L. P.; Golubev, D. A.; Filatova, M. Yu.

    2017-09-01

    The article describes the results of studying the problems of industrial wastewater treatment using higher aquatic vegetation (hydrophytes) in the former mining enterprise of the Far Eastern Federal District (FEFD). They are aimed at reducing the negative environment impact of toxic tin ore wastes. The material of research were drainage, mine and slime waters as well as Lemna minor and Common reed grass (Phragmites communis). In the work conventional modern physico-chemical, chemical, biological and mathematical-statistical methods were used, as well as in the process of research the methods of atomic absorption spectrophotometry for AAS and mass spectrometry with inductively coupled plasma on ISP-MS ELASN DRS II PerkinElmer was applied. The data obtained in the course of the experiment (2015-2016), indicate that a degree of wastewater treatment, using Lemna minor, is high. Virtually, all compounds of toxic chemical elements contained in industrial wastewater (zinc, cobalt, nickel, cadmium, iron, manganese, lead, etc.) were fully absorbed by a hydrophyte. Pollutant extraction was almost 95%. The obtained results of the study in laboratory conditions proved the possibility of effective use of the Lemna minor for the purification of drainage and mine waters. A key contribution of this paper is the relationship between possible toxic metals contained in industrial wastewater and a higher degree of absorption by their higher aquatic vegetation. These hydrophytes absorb these possible toxic metals in an aqueous medium and are contaminated with these heavy metals.

  8. Governance of project management and capital investments: A case study in Brazil’s mining industry

    Directory of Open Access Journals (Sweden)

    Jose Antonio Sousa Neto

    2012-12-01

    Full Text Available The objective of this paper is to present the results of a survey carried out to evaluate the application of corporate governance practices in the management of capital investments and projects by a Brazilian iron ore mining company in 2011. It addresses the main concepts related to projects and corporate governance, as well as the impacts of the Sarbanes-Oxley Act of 2002 on project management. Data were analyzed and processed using descriptive statistics. It was found that the four core disciplines of project governance: portfolio management, project sponsorship, project management, disclosure and reporting, are present in the organization’s management framework, including the application of controls necessary to ensure the accuracy of financial analysis and future cash flows from the successful completion of capital projects. On the other hand, a discrepancy was found in the disproportionate allocation of resources and staff to mega project management compared to small and medium projects which, as a result, are not completed on schedule and within budget. Deficiencies were also found in the attribution of priorities within the organization’s project portfolio.

  9. Worker exposure to silica dust in South African non-mining industries in Gauteng: An exploratory study

    CSIR Research Space (South Africa)

    Khoza, NN

    2012-06-01

    Full Text Available %, and sandblasting 2.4%. The overall maximum and minimum exposures were 5.772 and 0.009 mg/m?, respectively. Conclusion: Workers are potentially at high risk of contracting silicosis and other diseases associated with respirable silica dust. Dust control... and monitoring were inadequate in the industries visited. It is recommended that an in-depth study be conducted and that airborne dust-control programmes be implemented. Key words: non-mining industries, silica dust, respirable crystalline silica dust...

  10. Economic lifetime of a drilling machine:a case study on mining industry

    OpenAIRE

    Hamodi, Hussan; Lundberg, Jan; Jonsson, Adam

    2013-01-01

    Underground mines use many different types of machinery duringthe drift mining processes of drilling, charging, blasting, loading, scaling andbolting. Drilling machines play a critical role in the mineral extraction processand thus are important economically. However, as the machines age, theirefficiency and effectiveness decrease, negatively affecting productivity andprofitability and increasing total cost. Hence, the economic replacementlifetime of the machine is a key performance indicator...

  11. The tin mining and heavy mineral processing industry in the Kinta Valley, Perak, Malaysia

    International Nuclear Information System (INIS)

    Lee Swee Ching

    1994-01-01

    Overview of the tin mining and heavy mineral processing in the Kinta Valley, Perak, Malaysia was presented. Amang, a mixture composed of tin ore, sand, ilmenite, monazite, zircon, xenotime, struvite, etc , as a product from tin mining activities was discussed too in this paper

  12. The coal mining industry in Vietnam and its challenges; Steinkohlenbergbau in Vietnam und seine Herausforderungen

    Energy Technology Data Exchange (ETDEWEB)

    Martens, Per Nicolai; Pateiro Fernandez, Jose B.; Ahmad, Shakeel [RWTH Aachen (Germany). Inst. fuer Bergbaukunde I; Cramer, Thomas; Deissmann, Guido [Brenk Systemplanung GmbH, Aachen (Germany); Fuchsschwanz, Marcus [RWTH Aachen (Germany). Lehrstuhl fuer Geotechnik

    2010-04-15

    The province of Quang Ninh in the north of Vietnam is the most important coal mining region in the country. The NBCC (Nui Beo Coal Company) operates several open-cast mines. Large quantities of overburden have to be removed and dumped in the immediate environment. The creation of these heaps up to 300 m high is accompanied by many environmental problems. In particular ground and surface waters are contaminated by ''acid mine drainage''. Furthermore, large emissions chiefly in the form of dust occur as a result of the working and dumping depending on the season. In addition the stability of the heaps is sometimes greatly endangered. In the German-Vietnamese Research Association Mining and Environment in Vietnam (RAME) the aspects of coal mining with an effect on the environment are dealt with in various sub-associations and protective measures worked out jointly. (orig.)

  13. Municipal distribution of bladder cancer mortality in Spain: Possible role of mining and industry

    Directory of Open Access Journals (Sweden)

    Escolar-Pujolar Antonio

    2006-01-01

    Full Text Available Abstract Background Spain shows the highest bladder cancer incidence rates in men among European countries. The most important risk factors are tobacco smoking and occupational exposure to a range of different chemical substances, such as aromatic amines. Methods This paper describes the municipal distribution of bladder cancer mortality and attempts to "adjust" this spatial pattern for the prevalence of smokers, using the autoregressive spatial model proposed by Besag, York and Molliè, with relative risk of lung cancer mortality as a surrogate. Results It has been possible to compile and ascertain the posterior distribution of relative risk for bladder cancer adjusted for lung cancer mortality, on the basis of a single Bayesian spatial model covering all of Spain's 8077 towns. Maps were plotted depicting smoothed relative risk (RR estimates, and the distribution of the posterior probability of RR>1 by sex. Towns that registered the highest relative risks for both sexes were mostly located in the Provinces of Cadiz, Seville, Huelva, Barcelona and Almería. The highest-risk area in Barcelona Province corresponded to very specific municipal areas in the Bages district, e.g., Suría, Sallent, Balsareny, Manresa and Cardona. Conclusion Mining/industrial pollution and the risk entailed in certain occupational exposures could in part be dictating the pattern of municipal bladder cancer mortality in Spain. Population exposure to arsenic is a matter that calls for attention. It would be of great interest if the relationship between the chemical quality of drinking water and the frequency of bladder cancer could be studied.

  14. Environmental Conflicts in Mining, Quarrying and Metallurgical Industries in the Iberian Peninsula (19th and 20th Century): Pollution and Popular Protest

    OpenAIRE

    Guimarães, Paulo Eduardo

    2014-01-01

    ENVIRONMENTAL CONFLICTS IN MINING, QUARRYING, AND METALLURGICAL INDUSTRIES IN THE IBERIAN PENINSULA (19TH AND 20TH CENTURY): POLLUTION AND PUBLIC PROTEST. Paulo E. Guimarães, NICPRI / University of Évora (Portugal) J. D. Pérez Cebada, Universidad of Huelva (Spain) Comparative and transnational analyses of social conflicts, related to the environmental changes produced by modern and contemporary mining industries, have been a topic of growing academic interest for the last two decad...

  15. Exploration and Mining Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-09-01

    This Exploration and Mining Technology Roadmap represents the third roadmap for the Mining Industry of the Future. It is based upon the results of the Exploration and Mining Roadmap Workshop held May 10 ñ 11, 2001.

  16. Radiation protection of workers in the mining and milling of radioactive ores. Code of practice and technical addendum. 1983 ed

    International Nuclear Information System (INIS)

    1983-01-01

    This Code of Practice sets forth the means of ensuring protection against ionizing radiation for workers engaged in mining and milling of radioactive ores: general provisions outlining the responsibilities of the employer and the worker, limits of radiation exposure, administrative organization of radiation protection, radiation surveillance, engineering and administrative protective measures and medical surveillance. It is designed to facilitate the preparation and adoption of national and local regulations and factory rules for radiation protection in mining and milling of radioactive ores.

  17. Responsible Mining—The Impact of the Mining Industry in Poland on the Quality of Atmospheric Air

    Directory of Open Access Journals (Sweden)

    Justyna Woźniak

    2018-04-01

    Full Text Available This article addresses issues of air pollutant emissions by Polish mining industry leaders in the light of corporate social responsibility policy: Kombinat Górniczo-Hutniczy Miedzi Polska Miedź S.A. (KGHM, Polska Grupa Energetyczna S.A. (PGE. The Corporate Social Responsibility (CSR initiative regulates business activities at the level of environmental and social responsibility. Given the location of the “emission activities”, the level of pollutants (SOx, NOx, PMx generated by selected entities in the capital group over the years has been analysed. The aim of the article is to disclose relevant data on the emission reduction of entities as an expression of the actions of taking care of the environment and social protection. Evaluation of the extractive industry in the context of only interventions in the environment without emphasizing the economic and social significance is biased. Therefore, the level of emissivity of the whole economy has been verified against the background of the European Union. The article highlights the importance of coal power in two contexts: the production of electricity based on that fuel in controlled industrial installations and the uncontrolled use of coal in the municipal economy as a problem with a greater nuisance and impact on the quality of inhaled air. Analyses have shown that the widely understood mining industry is still a source of pollution, but power plants and processing plants have significantly reduced the volume of emissions over the years.

  18. Mine Water Treatment in Hongai Coal Mines

    Science.gov (United States)

    Dang, Phuong Thao; Dang, Vu Chi

    2018-03-01

    Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

  19. Mine Water Treatment in Hongai Coal Mines

    Directory of Open Access Journals (Sweden)

    Dang Phuong Thao

    2018-01-01

    Full Text Available Acid mine drainage (AMD is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

  20. The Practicality of Cooperative Education between an Industry and University

    Science.gov (United States)

    Oomichi, Takeo; Jianming, Yang; Matsubara, Takenori; Tatsuno, Kyoichi; Takahashi, Tomoichi

    Some cooperative methods have been proposed and executed as the R&D (research and development) between universities and industries meld together to form a new hybeid business. This paper proposes the ides of “Fusion Education” for the advancement of education and for fostering new business. In fusion education, university students will begin by mainly verifying the application potential of a developed system such as modulated robotic software, for example, and improve specific areas when and if needed. Then, the university will rank the systems according to its reliability or safety record (based on the student) complete verification test which includes data on when the robot will be operated and under what varying conditions (such as performance in various private houses). The university essentially gives students the chance to find a solution to practical problems while the industry gets a reliable (fully authorized) system as result of this education process. The concept and feasibility of this “fusion education” will now be discussed.

  1. Estimated use of explosives in the mining industries of Algeria, Iran, Iraq, and Libya

    Energy Technology Data Exchange (ETDEWEB)

    Wilburn, D.R.; Russell, J.A.; Bleiwas, D.I. [and others

    1995-09-01

    This work was performed under Memorandum of Agreement B291534 Between the Lawrence Livermore National Laboratory (LLNL) and the United States Bureau of Mines. The Bureau of Mines authors are members of the Minerals Availability Field Office (MAFO) in Denver, CO, which uses an extensive network of information sources to develop and maintain the Minerals Availability database concerning mining and minerals properties worldwide. This study was initiated and directed by F. Heuze at LLNL. A previous study on the same subject had been commissioned by LLNL from the Mining Journal Research Services (MJRS) in London ,UK. Its results were integrated into this report. MJRS is shown as one of the numerous sources which were used for this work. All sources are listed in the report. This document is arranged in four sections, one for each country, in alphabetical order. Thie outline is the same for each country.

  2. Factors affecting driver alertness during the operation of haul trucks in the South African mining industry

    CSIR Research Space (South Africa)

    Schutte, PC

    2003-06-01

    Full Text Available In view of the seriousness of haul trucks accidents, SIMRAC initiated research to identify factors affecting haul truck driver alertness during mining operations. The information obtained during the risk analysis was used to identify possible...

  3. Implication of the dominant design in electronic initiation systems in the South African mining industry

    CSIR Research Space (South Africa)

    Smit, FC

    1998-11-01

    Full Text Available This article analyzes an emerging technological innovation, namely, electronic initiation systems for mining explosives in South Africa. The concept of electronic initiation is presenting itself as a challenge to traditional initiation systems...

  4. How can we restore biodiversity and ecosystem services in mining and industrial sites?

    Czech Academy of Sciences Publication Activity Database

    Prach, Karel; Tolvanen, A.

    2016-01-01

    Roč. 23, č. 14 (2016), s. 13587-13590 ISSN 0944-1344 Institutional support: RVO:67985939 Keywords : restoration * mining sites * reclamation Subject RIV: EH - Ecology, Behaviour Impact factor: 2.741, year: 2016

  5. Stakeholders' Engagement Methods for the Mining Social Responsibility Practice: Determination of Local Issues and Concerns Related to the Mines Operations in Northwest of the US.

    Science.gov (United States)

    Masaitis, A.

    2014-12-01

    Every year, all around the world, global environmental change affects the human habitat. This is effect enhanced by the mining operation, and creates new challenges in relationship between the mining and local community. The purpose of this project are developed the Stakeholders engagement evaluation plan which is currently developed in University of Nevada, Reno for the Emigrant mining project, located in the central Nevada, USA, and belong to the Newmont Mining Corporation, one of the gold production leader worldwide. The needs for this project is to create the open dialog between Newmont mining company and all interested parties which have social or environmental impacts from the Emigrant mine. Identification of the stakeholders list is first and one of the most difficult steps in the developing of mine social responsibility. Stakeholders' engagement evaluation plan must be based on the timing and available resources of the mining company, understanding the goals for the engagement, and on analyzes of the possible risks from engagement. In conclusion, the Stakeholders engagement evaluation plan includes: first, determinations of the stakeholders list, which must include any interested or effected by the mine projects groups, for example: state and local government representatives, people from local communities, business partners, environmental NGOs, indigenous people, and academic groups. The contacts and availability for communication is critical for Stakeholders engagement. Next, is to analyze characteristics of all these parties and determinate the level of interest and level of their influence on the project. The next step includes the Stakeholders matrix and mapping development, where all these information will be put together.After that, must be chosen the methods for stakeholders' engagement. The methods usually depends from the goals of engagement (create the dialog lines, collect the data, determinations of the local issues and concerns, or establish

  6. Trophic priorities of millipedes (Diplopoda) in process of rehabilitation of the territories disturbed by mining industry

    OpenAIRE

    Y. L. Kulbachko; О. O. Didur

    2012-01-01

    The food selectivity of millipedes (Diplopoda) was studied in different variants of mine spoils and chernozem fillings applied as topsoil. It was found that the ordinary chernozem fillings determines the formation of food priorities increasingly in comparison with the mine spoil. There are shown statistically significant differences between millipeds food priorities depending on the proposed feed: litter leaves of trees (Acer platanoides, Robinia pseudoacacia, Juniperus virginiana) used in fo...

  7. A quantitative method for selecting renewable energy projects in the mining industry based on sustainability

    OpenAIRE

    Mostert, M.

    2014-01-01

    Mining companies sponsor a range of non-core, corporate social responsibility projects to adhere to social and labour plans and environmental management prerequisites that form part of a mining licence application. Some companies go above and beyond such projects, sponsoring initiatives that generate renewable energy through solar power, wind energy, natural gas, etc. The challenge for these companies is to choose between a variety of projects to ensure maximum value, especially in times when...

  8. Problems with Reporting and Evaluating Mining Industry Community Development Projects: A Case Study from Tanzania

    Directory of Open Access Journals (Sweden)

    Esther Wangari

    2012-02-01

    Full Text Available Reporting on contributions to community development is one way gold mining companies communicate the expanse and depth of their commitment to social responsibility. These projects are intended to provide the mine-proximate communities with some of the wealth and other benefits generated by mine development in their locales. We raise questions about reporting and evaluation of community development projects undertaken by AngloGold Ashanti in the two communities of Nyakabale and Nyamalembo, near its Geita mining projects in the Lake Victoria goldfields of Tanzania. We use archival data and data obtained from field research conducted during different periods throughout 2005, 2007 and 2010 to compare what the company reports to have done with what is found on the ground. Our findings revealed that the corporate reporting is misleading, ambiguous, and omissive. Much of the effort labeled “community development” benefited the companies directly via infrastructure development, food supplies to the mine cafeteria, and worker health. We argue that, if Corporate Social Responsibility (CSR projects are to be the primary way local people directly benefit from mine development, the relationship between the value of those projects and the wealth taken from the location should be considered, community projects should be well defined and differentiated from company-oriented projects, and community representatives should participate in monitoring the success and impact of community development projects.

  9. A practical trial to increase the coal recovery in highwall auger mining in Australia

    Energy Technology Data Exchange (ETDEWEB)

    K. Matsui; A. Yabuki; H. Shimada; T. Sasaoka; T. Ueda; T. Yuasa

    2003-07-01

    The basic concept of auger mining is to extract coal beyond the economic limits of surface mining technology by drilling holes of an appropriate diameter size into the exposed seam of the highwall as deep as is technically, economically and operationally feasible. This method of mining is used at the final highwall of typical surface mining operations. This paper describes the auger mining systems and discusses the methods to increase the coal recovery in auger mining from a field trial at Muswell Brook mine in Hunter Valley, NSW in Australia. 1 ref., 6 figs., 2 tabs.

  10. Health promoting leadership practices in four Norwegian industries.

    Science.gov (United States)

    Skarholt, Kari; Blix, Elisabeth H; Sandsund, Mariann; Andersen, Thale K

    2016-12-01

    The aim of this article is to address health promoting leadership; what do leaders actually do to promote health at work? Leadership practice plays a crucial role in the workplace and greatly affects the working environment and working conditions. Through a theoretical and empirical approach, we seek to find characteristics/patterns of health promoting leadership. The definition of health promoting leadership is a democratic and supportive leadership style, where leaders seek to motivate and inspire their employees. The study in this article is based on qualitative research methods. We have investigated and compared leadership practice in four different organizations/industries in Norway: construction, oil and gas, health care and cleaning. These organizations and professions are quite different, and thus leadership must be understood and developed within its context. However, we found some generic characteristics of health promoting leadership: hands-on, accessible, supportive, inclusive and democratic. Current literature only rarely addresses how leadership affects health promotion at work. Consequently, more knowledge is needed about how leaders really succeed in creating healthy workplaces and healthy employees. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  11. A Study on How Industrial Pharmacists Rank Competences for Pharmacy Practice: A Case for Industrial Pharmacy Specialization

    Directory of Open Access Journals (Sweden)

    Jeffrey Atkinson

    2016-02-01

    Full Text Available This paper looks at the way in which industrial pharmacists rank the fundamental competences for pharmacy practice. European industrial pharmacists (n = 135 ranked 68 competences for practice, arranged into 13 clusters of two types (personal and patient care. Results show that, compared to community pharmacists (n = 258, industrial pharmacists rank competences centering on research, development and production of drugs higher, and those centering on patient care lower. Competences centering on values, communication skills, etc. were ranked similarly by the two groups of pharmacists. These results are discussed in the light of the existence or not of an “industrial pharmacy” specialization.

  12. Numerical modelling of mine workings.

    CSIR Research Space (South Africa)

    Lightfoot, N

    1999-03-01

    Full Text Available to cover most of what is required for a practising rock mechanics engineer to be able to use any of these five programs to solve practical mining problems. The chapters on specific programs discuss their individual strengths and weaknesses and highlight... and applications of numerical modelling in the context of the South African gold and platinum mining industries. This includes an example that utilises a number of different numerical 3 modelling programs to solve a single problem. This particular example...

  13. Estimation of quantitative levels of diesel exhaust exposure and the health impact in the contemporary Australian mining industry.

    Science.gov (United States)

    Peters, Susan; de Klerk, Nicholas; Reid, Alison; Fritschi, Lin; Musk, Aw Bill; Vermeulen, Roel

    2017-03-01

    To estimate quantitative levels of exposure to diesel exhaust expressed by elemental carbon (EC) in the contemporary mining industry and to describe the excess risk of lung cancer that may result from those levels. EC exposure has been monitored in Western Australian miners since 2003. Mixed-effects models were used to estimate EC levels for five surface and five underground occupation groups (as a fixed effect) and specific jobs within each group (as a random effect). Further fixed effects included sampling year and duration, and mineral mined. On the basis of published risk functions, we estimated excess lifetime risk of lung cancer mortality for several employment scenarios. Personal EC measurements (n=8614) were available for 146 different jobs at 124 mine sites. The mean estimated EC exposure level for surface occupations in 2011 was 14 µg/m 3 for 12 hour shifts. Levels for underground occupation groups ranged from 18 to 44 µg/m 3 . Underground diesel loader operators had the highest exposed specific job: 59 µg/m 3 . A lifetime career (45 years) as a surface worker or underground miner, experiencing exposure levels as estimated for 2011 (14 and 44 µg/m 3 EC), was associated with 5.5 and 38 extra lung cancer deaths per 1000 males, respectively. EC exposure levels in the contemporary Australian mining industry are still substantial, particularly for underground workers. The estimated excess numbers of lung cancer deaths associated with these exposures support the need for implementation of stringent occupational exposure limits for diesel exhaust. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  14. Management of waste from uranium mining and milling in Australia

    International Nuclear Information System (INIS)

    Harries, J.; Levins, D.; Ring, B.; Zuk, W.

    1997-01-01

    Australia has a long history of uranium mining. Most of the early production came from Rum Jungle in the Northern Territory and Mary Kathleen in Queensland. The second generation of uranium mines (Ranger, Nabarlek and Olympic Dam) came on line in the 1970s and 1980s at a time of increased environmental awareness and public scrutiny. The waste management practices at these mines are in accordance with best practicable technology for the uranium mining industry. This paper describes Australia's experience in managing the front end of the fuel cycle; uranium mining and ore processing. (orig.)

  15. Environmental assessment of mining industry solid pollution in the mercurial district of Azzaba, northeast Algeria.

    Science.gov (United States)

    Seklaoui, M'hamed; Boutaleb, Abdelhak; Benali, Hanafi; Alligui, Fadila; Prochaska, Walter

    2016-11-01

    To date, there have been few detailed studies regarding the impact of mining and metallogenic activities on solid fractions in the Azzaba mercurial district (northeast Algeria) despite its importance and global similarity with large Hg mines. To assess the degree, distribution, and sources of pollution, a physical inventory of apparent pollution was developed, and several samples of mining waste, process waste, sediment, and soil were collected on regional and local scales to determine the concentration of Hg and other metals according to their existing mineralogical association. Several physico-chemical parameters that are known to influence the pollution distribution are realized. The extremely high concentrations of all metals exceed all norms and predominantly characterize the metallurgic and mining areas; the metal concentrations significantly decrease at significant low distances from these sources. The geo-accumulation index, which is the most realistic assessment method, demonstrates that soils and sediments near waste dumps and abandoned Hg mines are extremely polluted by all analyzed metals. The pollution by these metals decreases significantly with distance, which indicates a limited dispersion. The results of a clustering analysis and an integrated pollution index suggest that waste dumps, which are composed of calcine and condensation wastes, are the main source of pollution. Correlations and principal component analysis reveal the important role of hosting carbonate rocks in limiting pollution and differentiating calcine wastes from condensation waste, which has an extremely high Hg concentration (˃1 %).

  16. LEVELS OF STATE REGULATION OF THE LEGAL STATUS OF THE DISPLACED PERSONS IN THE GOLD MINING INDUSTRY OF THE USSR (1930-1950

    Directory of Open Access Journals (Sweden)

    Kochegarova Elena Danilovna

    2013-04-01

    Full Text Available Repressive policy of the Soviet state remains one of the actual problems of Russian historical science. The peculiarities of the legal status of displaced persons, their contribution to the socio-economic development of certain regions, the use of labor by industry and government agencies deserve more attention. Purpose The purpose of this work is the analysis of public policy at different levels and reconstruction of the mechanism of development, adoption and implementation of government decisions in the employment of special group in the gold mining industry. Methodology The dialectical approach is a methodological basis of the research and was implemented through the principles of historicism, scientism, objectivity. Results General thrust of the state policy is determined by the directive of the central, regional and local authorities have particularized or duplicated relevant legal documents at higher levels. Dynamics of changes in the legal status of the displaced persons determined mutually exclusive trends: 1 the weakening or removal of restrictions, 2 toughening control. Priority in decisions belonged Party committees at all levels of management, while the real power had repressive authorities. The practical implementation of government decisions at the local level distorted and was adjusted based on personal or group interests. Practical implications The results can be used for further scientific development of the problem of forced migration.

  17. Continuity and change in interorganizational project practices : The Dutch shipbuilding industry, 1950-2010

    NARCIS (Netherlands)

    Levering, R.C.; Ligthart, R.; Noorderhaven, N.G.; Oerlemans, L.A.G.

    2013-01-01

    The Dutch shipbuilding industry has a longstanding tradition in project-based production. Recently, industry actors have acknowledged a serious misfit between interorganizational project practices, defined as behaviors related to collaboration, and interorganizational project demands, defined as

  18. Integration of fuzzy reasoning approach (FRA and fuzzy analytic hierarchy process (FAHP for risk assessment in mining industry

    Directory of Open Access Journals (Sweden)

    Shikha Verma

    2014-10-01

    Full Text Available Purpose: Mining industry has always been known for its unsafe working environment. This industry is one of the most hazard prone industries. To maintain safety in workplace timely assessment of risk associated with different operations performed to extract ore from the ore body has become necessity. To serve the said purpose, present work demonstrates a robust hybrid risk assessment approach for mining industry.Design/Methodology: Accident data from 1995 to 2012 is reviewed to identify hazards contributed to negative outcomes. The FRA approach is implemented to evaluate the risk levels associated with identified hazard factors. Thereafter AHP pairwise comparison matrix is developed to obtain priority weights for the hazard factors. Final priority of hazards based on severity of level of risk associated with them is obtained considering the outcome of FRA approach in terms of risk score for the hazards, combined with the priority weights obtained from AHP technique.Findings: Defuzzified FAHP weight of hazard factors, this weight gives priority sequence of hazards to be considered for development of plan of mitigation.Originality/Value: Risk assessment is a requirement of the Occupational Health and Safety Act 2000 (Section 7& 8. The data required to assess the risk is uncertain, and in such case fuzzy approach is well suited to process the data and get the crisp output. The output of fuzzy approach is made robust with its integration to AHP. In this way FAHP can be used as robust technique for risk assessment in this industry and this technique develops an efficient safety management system for the achievement of goal to develop the workplace with zero accident, which many other countries have already achieved.

  19. Acid leaching of uranium present in a residue from mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Braulio, Walace S.; Ladeira, Ana C.Q. [Center for Development of Nuclear Technology (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Dept. of Mineral Technology

    2011-07-01

    The acid mine drainage is one of the most important environmental problems associated with mining of ores containing sulfides. The treatment of these acid effluents, which contains high concentrations of dissolved metals and anions, is generally by liming. The wastes generated in the liming process may present significant toxicity and their storage in inappropriate places waiting for treatment is a common issue that requires solution. Osamu Utsumi Mine located in the city of Caldas, Minas Gerais, has been facing this problem. The residue of this mine consists of an alkaline sludge generated from the neutralization of the pH of acid mine drainage and is rich in various metals, including uranium. The main concern is the long term stability of this residue, which is in permanent contact with the acid water in the open pit. The recovery of uranium by hydrometallurgical techniques, such as acid leaching, can be a viable alternative on the reuse of this material. This study aimed at establishing a specific leaching process for the recovery of uranium present in the sludge from Caldas uranium mine. Some parameters such as solid/liquid ratio (0.09 to 0.17), time of leaching (1 to 24 hours) and concentration of sulfuric acid (pH from 0 to 3.0) were assessed. The results showed that it is possible to extract 100% of uranium present in the sludge. The concentration of U{sub 3}O{sub 8} in the residue was 0.25%, similar to the content of the vein ores which is around 0.20% to 1.0%. The best experimental leaching condition is solid/liquid ratio of 0.17, pH 1.0 and 2 hours of reaction at room temperature (25 deg C). The content of uranium in the liquor is around 440 mgL{sup -1}. The recovery of the uranium from the liquor is under investigation by ionic exchange. (author)

  20. Acid leaching of uranium present in a residue from mining industry

    International Nuclear Information System (INIS)

    Braulio, Walace S.; Ladeira, Ana C.Q.

    2011-01-01

    The acid mine drainage is one of the most important environmental problems associated with mining of ores containing sulfides. The treatment of these acid effluents, which contains high concentrations of dissolved metals and anions, is generally by liming. The wastes generated in the liming process may present significant toxicity and their storage in inappropriate places waiting for treatment is a common issue that requires solution. Osamu Utsumi Mine located in the city of Caldas, Minas Gerais, has been facing this problem. The residue of this mine consists of an alkaline sludge generated from the neutralization of the pH of acid mine drainage and is rich in various metals, including uranium. The main concern is the long term stability of this residue, which is in permanent contact with the acid water in the open pit. The recovery of uranium by hydrometallurgical techniques, such as acid leaching, can be a viable alternative on the reuse of this material. This study aimed at establishing a specific leaching process for the recovery of uranium present in the sludge from Caldas uranium mine. Some parameters such as solid/liquid ratio (0.09 to 0.17), time of leaching (1 to 24 hours) and concentration of sulfuric acid (pH from 0 to 3.0) were assessed. The results showed that it is possible to extract 100% of uranium present in the sludge. The concentration of U 3 O 8 in the residue was 0.25%, similar to the content of the vein ores which is around 0.20% to 1.0%. The best experimental leaching condition is solid/liquid ratio of 0.17, pH 1.0 and 2 hours of reaction at room temperature (25 deg C). The content of uranium in the liquor is around 440 mgL -1 . The recovery of the uranium from the liquor is under investigation by ionic exchange. (author)

  1. Ethical business practices in the Eastern Cape automotive industry

    Directory of Open Access Journals (Sweden)

    Hendrik Lloyd

    2014-11-01

    Full Text Available High profile scandals have brought about a renewed interest in business ethics and, in particular, inunderstanding the factors that promote ethical behaviour. Business ethics is about identifying andimplementing values, rules and standards of conduct for guiding morally right behaviour in an organisation’sinteraction with its stakeholders. Against this background a quantitative analysis of the ethical practices of46 companies operating in the Eastern Cape automotive industry was conducted to determine the extent towhich ethics-related interventions contributed to establishing and maintaining an ethical organisationalenvironment. A structured online questionnaire was used to collect the data. The data collected wassubjected to extensive statistical analyses, including Cronbach Alpha coefficients and item total correlations,and various descriptive statistics were included as a quantitative summary of the data. A constant referencevalue for the study was also calculated to allow inferences regarding the significance of the tested variablesto the study. The results revealed that the organisations in the sample are highly ethical due to the presenceof ethics-related interventions, including a code of ethics, committed leadership, adherence to internal andexternal governance requirements, compliance with legislation and encouragement and disclosure ofunethical behaviour. In light of the high number of ethical scandals internationally, this study will add to theempirical body of business ethics research, as it provides organisations with a framework to establish andmaintain an ethical business environment.

  2. What Gives You a Social Licence? An Exploration of the Social Licence to Operate in the Australian Mining Industry

    Directory of Open Access Journals (Sweden)

    Sara Bice

    2014-01-01

    Full Text Available This article analyses the ways in which major, multinational mining companies operating within Australia understand sustainable development and articulate their “social licence to operate”. The article contributes a novel perspective to ongoing discussions about the social licence by exploring the ways in which leading Australian mining companies define and assert their social licences through sustainable development discourse. A content and discourse analysis of 18 sustainability reports across a four year period, supplemented by qualitative interview data, draws out these issues. While most companies use these reports to confirm beliefs in the necessity of a social licence, the ways in which the licence is specifically defined and maintained are not generally made explicit. Additionally, key theoretical criteria required for a social licence, such as free, prior and informed consent, appear to be overlooked. In conclusion, the article suggests ways in which criteria for a social licence within the mining industry could be defined more clearly and raises consequent questions to shape future research.

  3. Investigation of mine and industry dumps in Lower Saxony (FRG) in relation to a possible release of natural radioactive elements

    International Nuclear Information System (INIS)

    Schmitz, J.; Klein, H.

    1985-09-01

    More than 230 dumps of mines and industries in the country of Lower Saxony (FRG) were recorded, radiometrically measured, evaluated and some of them sampled. Most of the mine dumps belonged to old and smaller residues of the lead/zinc and iron ore mining while the largest depositions contain tailings of modern ore benificiation or fly ash disposal. The highest doses, up to 2 mSv/a, were found on the dumps of the redmud and phosphate-gypsum deposits. These are followed by fly ash and slag dumps which show doses between 1 and 2 mSv/a. The lowest doses were found on the dumps of the hydrothermal Pb/Zn and iron ore deposits, while the slag piles of the iron ore processing showed higher thorium values. The uranium-, Ra-226- and Pb-210 analyses of the deposited materials confirmed the radiometric results. The analysis of seepage and gallery waters showed only a small number of values exceeding the derived drinking water concentrations. The examination of nearly all mineral deposition in Lower Saxony have clearly shown that primary radioecological impacts can be excluded, which might be not the case when the deposited material undergoes a recycling process. (orig.) [de

  4. Computer integrated manufacturing in the chemical industry : Theory & practice

    NARCIS (Netherlands)

    Ashayeri, J.; Teelen, A.; Selen, W.J.

    1995-01-01

    This paper addresses the possibilities of implementing Computer Integrated Manufacturing in the process industry, and the chemical industry in particular. After presenting some distinct differences of the process industry in relation to discrete manufacturing, a number of focal points are discussed.

  5. Best Practices in School-to-Careers: The Utilities Industry.

    Science.gov (United States)

    National Employer Leadership Council, Washington, DC.

    This document highlights the school-to-careers (STC) partnerships connecting workplace experiences to classroom learning to prepare students for successful employment in the utilities industry. First, the current state of the utilities industry and careers in the utilities industry are reviewed. Next, the following organizations and employers are…

  6. Beating Obesity: Factors Associated with Interest in Workplace Weight Management Assistance in the Mining Industry

    Directory of Open Access Journals (Sweden)

    Tamara D. Street

    2017-03-01

    Conclusion: Weight management programs should provide information, motivation. and trouble-shooting assistance to meet the needs of at-risk mining employees, including those who are attempting to change and maintain behaviors to achieve a healthy weight and be suitably fit for work.

  7. Amendments with organic and industrial wastes stimulate soil formation in mine tailings as revealed by micromorphology

    NARCIS (Netherlands)

    Zanuzzi, A.; Arocena, J.M.; van Mourik, J.M.; Faz Cano, A.

    2009-01-01

    Mine tailings are inhospitable to plants and soil organisms, because of low pH and poor soil organic matter contents. Vegetation establishment requires a soil system capable of supporting the nutrient and water requirements of plants and associated organisms. The objective of this study was to

  8. Blending mining and nuclear industries at the Waste Isolation Pilot Plant

    International Nuclear Information System (INIS)

    Walls, J.R.

    1990-01-01

    At the Waste Isolation Pilot Plant (WIPP) traditional procedures for underground mining activities have been significantly altered in order to assure underground safety and project adherence to numerous regulatory requirements. Innovative techniques have been developed for WIPP underground procedures, mining equipment, and operating environments. The mining emphasis at WIPP is upon the quality of the excavation, not (as in conventional mines) on the production of ore. The WIPP is a United States Department of Energy (DOE) project that is located 30 miles southeast of Carlsbad, New Mexico, where the nation's first underground engineered nuclear repository is being constructed. The WIPP site was selected because of its location amidst a 607 meter thick salt bed, which provides a remarkably stable rock formation for the permanent storage of nuclear waste. The underground facility is located 655 meters below the earth's surface, in the Salado formation, which comprises two-hundred million year old halites with minor amounts of clay and anhydrites. When completed, the WIPP underground facility will consist of two components: approximately 81 square kilometers of experimental areas, and approximately 405 square kilometers of repository. 3 figs

  9. Oral bioaccessibility and human exposure to anthropogenic and geogenic mercury in urban, industrial and mining areas

    NARCIS (Netherlands)

    Rodrigues, S.M.; Coelho, C.; Cruz, N.; Monteiro, R.J.R.; Henriques, B.; Duarte, A.C.; Romkens, P.F.A.M.; Pereira, E.

    2014-01-01

    The objective of this study was to characterize the link between bioaccessibility and fractionation of mercury (Hg) in soils and to provide insight into human exposure to Hg due to inhalation of airborne soil particles and hand-to-mouth ingestion of Hg-bearing soil. Mercury in soils from mining,

  10. A COMPARISON OF GREEN SUPPLY CHAIN MANAGEMENT PRACTICES AMONG INDUSTRIES SECTORS IN CHINA

    Science.gov (United States)

    Sun, Ying; Miyadera, Tetsuhiko; Fujita, Tsuyoshi

    This paper aims to examine the differences of Green supply chain management (GSCM) implementation among chemical, automobile and machinery industries in China based on a questionnaire survey designed by Industrial Ecology at two industrial parks in Shenyang city. Exploratory factor analysis and one way analysis of variance (ANOVA) were used to analyze the data. The main result was that the GSCM practices of the three industries are still at a beginning stage. The level of GSCM practices of automobile industry (promoted by international market competition) was higher than those of chemical and machinery industry (promoted by domestic laws and policies).

  11. Implications of mining practices in an open-pit gold mine for monitoring of a comprehensive test-ban treaty

    International Nuclear Information System (INIS)

    Jarpe, S.P.; Moran, B.; Goldstein, P.; Glenn, L.A.

    1996-01-01

    This report summarizes the results of an experiment at the Gold Quarry pit, operated by the Newmont Gold Company at Carlin, NV The purpose of the experiment was to obtain local and regional seismic data, together with ''ground truth'', from conventional surface blasting activity and to use these data to help determine the effectiveness with which conventional mining blasts can be discriminated from underground nuclear explosions

  12. An Evaluation of Practical Applicability of Multi-Assortment Production Break-Even Analysis based on Mining Companies

    Science.gov (United States)

    Fuksa, Dariusz; Trzaskuś-Żak, Beata; Gałaś, Zdzisław; Utrata, Arkadiusz

    2017-03-01

    In the practice of mining companies, the vast majority of them produce more than one product. The analysis of the break-even, which is referred to as CVP (Cost-Volume-Profit) analysis (Wilkinson, 2005; Czopek, 2003) in their case is significantly constricted, given the necessity to include multi-assortment structure in the analysis, which may have more than 20 types of assortments (depending on the grain size) in their offer, as in the case of open-pit mines. The article presents methods of evaluation of break-even (volume and value) for both a single-assortment production and a multi-assortment production. The complexity of problem of break-even evaluation for multi-assortment production has resulted in formation of many methods, and, simultaneously, various approaches to its analysis, especially differences in accounting fixed costs, which may be either totally accounted for among particular assortments, relating to the whole company or partially accounted for among particular assortments and partially relating to the company, as a whole. The evaluation of the chosen methods of break-even analysis, given the availability of data, was based on two examples of mining companies: an open-pit mine of rock materials and an underground hard coal mine. The selection of methods was set by the available data provided by the companies. The data for the analysis comes from internal documentation of the mines - financial statements, breakdowns and cost calculations.

  13. Contract Mining versus Owner Mining – The Way Forward | Suglo ...

    African Journals Online (AJOL)

    Ghana Mining Journal ... By contracting out one or more of their mining operations, the mining companies can concentrate on their core businesses. This paper reviews ... The general trends in the mining industry show that contract mining will be the way forward for most mines under various circumstances in the future.

  14. Environmental mining plan of the construction materials industry in Cartagena, Phase 1 Diagnostic. Vol.1 and Vol.2(Annex)

    International Nuclear Information System (INIS)

    Castiblanco, Carmen Rosa; Franco Serna, Jose Vicente; Nino, Jaime

    1996-01-01

    INGEOMINAS carried out this project in the cities of Cartagena, Bucaramanga, Cali and Bogota, in two phases: Phase 1 (Diagnostic) and Phase II (Formulation of Handling Plan). The phase 1 that here is described, it upgrades the knowledge of the extractive industry of the construction materials for the city of Cartagena, through bibliographical revision and field work, carried out in 50 quarries that supply from these materials to the city. This study, besides the economic and legal handling, identifies technical aspects related with the geology, the mining and the environmental situation. In accordance with their likeness, geologic, morphological and of exploitation (extraction methods and mining development), the quarries met in five groups: Exploitations on calcareous deposits of the La Popa Formation, exploitations on clay deposits of the La Popa Formation, exploitations on detritus deposits of half grain to thick (La Popa-Arenosa Formation; Pendales Conglomerate and Rotinet Formation) and exploitation of calcareous of the Arroyo de Piedra Formation. The extraction of these materials is characterized by its low degree of development technician, lack of planning mining, lack of appropriate infrastructure that allows a better development of the sector, is also evident the control lack on the part of the entities in charge of the handling of this industry. These factors added to a demand every time in increase of these materials, they have taken to a progressive deterioration in the landscape, increase of the noise and particles in the air and in the waters. The low control in this activity has generated the proliferation of informal exploitations that they find in this activity a way of subsistence

  15. Management of organic residues from the industrial restaurant of Mina Cauê, Mining Complex of Itabira/MG

    Directory of Open Access Journals (Sweden)

    Francy Nara Fonseca Barcelos

    2017-09-01

    Full Text Available Industrial restaurants generate, when preparing and serving meals, a number of wastes that are administered in different ways. However, increasing waste generation leads to the need of establishing measures capable of permanently control the environmental effects of the entire production process. In this sense, this work aimed at verifying the generation of organic residues from the industrial restaurant of Cauê Mine, located in the Itabira/MG Mining Complex, as well as to evaluate if the technologies currently used for the management of these wastes are environmentally sustainable and economically viable. Thus, it was sought to identify the foods responsible for their higher generation, resulting in the alteration of the menu and, consequently, a reduction of 81.85% of organic residues. Another important factor was the reuse of fruit peels in desserts, providing healthier foods and reducing the amount of waste sent to the final treatment. Regarding the final disposal of organic waste in the landfill, it was observed that during the analyzed period there was a reduction of 64.67% of the values initially paid. In the aspect related to waste, it was found that the campaigns developed aiming at the "zero waste" of both restaurant staff and customers, also had a positive influence on the reduction of residual "ingestion" waste.

  16. Levels and composition of atmospheric particulates (PM10) in a mining-industrial site in the city of Lavrion, Greece.

    Science.gov (United States)

    Protonotarios, V; Petsas, N; Moutsatsou, A

    2002-11-01

    The present work focuses on the characterization of air quality and the identification of pollutant origin at a former mining site in the city of Lavrion, Greece. A historical metallurgy complex is reused for establishing the Lavrion Technology and Cultural Park (LTCP). A serious problem with this is the severe soil contamination that resulted from intensive mining and metallurgical activities that has taken place in the greater area for the past 3,000 years. Among other consequences, surface-polluted depositions, rich in heavy and toxic metals, are loose and easily wind-eroded, resulting in transportation of particulate matter (PM) in the surrounding atmosphere. On the other hand, there are a number of industries relatively close to the site that are potential sources of PM air pollution. The current study deals with the collection and analysis of PM10 samples with respect to their concentration in heavy metals, such as Pb, Cd, Cu, Fe, Zn, Mn, Cr, and Ni. Though not a heavy metal, As also is included. Furthermore, the source of these elements is verified using statistical correlation and by calculating enrichment factors (EFs), considering that some substances are certainly of contaminated soil origin. Results show that PM10 and element concentrations are relatively low during winter but significantly increase during summer. Fe, Pb, Zn, Mn, and Cu may be considered of contaminated soil origin, while As, Ni, Cd, and Cr are very much enriched with respect to contaminated soil, indicating another possible source attributed to the adjacent industrial plants.

  17. Occupational health risk assessment : overview, model and guide for the South African mining industry towards a holistic solution / Casper Johannes Badenhorst

    OpenAIRE

    Badenhorst, Casper Johannes

    2006-01-01

    In the South African Mining Industry the Legislator has recognised the need to identify health hazards associated with any workplace or process and to assess ,the associated risks (Leon, 1994). Neither the Mine Health and Safety Act (29/1996) and its Regulations, nor the Occupational Health and Safety Act (85/1993) and its Regulations, prescribe a specific format for the systematic and holistic approach to conduct occupational health risk assessments, but do prescribe some crit...

  18. The hydrogen mine introduction initiative

    Energy Technology Data Exchange (ETDEWEB)

    Betournay, M.C.; Howell, B. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Mining and Mineral Sciences Laboratories

    2009-07-01

    In an effort to address air quality concerns in underground mines, the mining industry is considering the use fuel cells instead of diesel to power mine production vehicles. The immediate issues and opportunities associated with fuel cells use include a reduction in harmful greenhouse gas emissions; reduction in ventilation operating costs; reduction in energy consumption; improved health benefits; automation; and high productivity. The objective of the hydrogen mine introduction initiative (HMII) is to develop and test the range of fundamental and needed operational technology, specifications and best practices for underground hydrogen power applications. Although proof of concept studies have shown high potential for fuel cell use, safety considerations must be addressed, including hydrogen behaviour in confined conditions. This presentation highlighted the issues to meet operational requirements, notably hydrogen production; delivery and storage; mine regulations; and hydrogen behaviour underground. tabs., figs.

  19. Health risk assessment and the practice of industrial hygiene.

    Science.gov (United States)

    Paustenbach, D J

    1990-07-01

    It has been claimed that there may be as many as 2000 airborne chemicals to which persons could be exposed in the workplace and in the community. Of these, occupational exposure limits have been set for approximately 700 chemicals, and only about 30 chemicals have limits for the ambient air. It is likely that some type of health risk assessment methodology will be used to establish limits for the remainder. Although these methods have been used for over 10 yr to set environmental limits, each step of the process (hazard identification, dose-response assessment, exposure assessment, and risk characterization) contains a number of traps into which scientists and risk managers can fall. For example, regulatory approaches to the hazard identification step have allowed little discrimination between the various animal carcinogens, even though these chemicals can vary greatly in their potency and mechanisms of action. In general, epidemiology data have been given little weight compared to the results of rodent bioassays. The dose-response extrapolation process, as generally practiced, often does not present the range of equally plausible values. Procedures which acknowledge and quantitatively account for some or all of the different classes of chemical carcinogens have not been widely adopted. For example, physiologically based pharmacokinetic (PB-PK) and biologically based models need to become a part of future risk assessments. The exposure evaluation portion of risk assessments can now be significantly more valid because of better dispersion models, validated exposure parameters, and the use of computers to account for complex environmental factors. Using these procedures, industrial hygienists are now able to quantitatively estimate the risks caused not only by the inhalation of chemicals but also those caused by dermal contact and incidental ingestion. The appropriate use of risk assessment methods should allow scientists and risk managers to set scientifically valid

  20. Data mining applications in healthcare.

    Science.gov (United States)

    Koh, Hian Chye; Tan, Gerald

    2005-01-01

    Data mining has been used intensively and extensively by many organizations. In healthcare, data mining is becoming increasingly popular, if not increasingly essential. Data mining applications can greatly benefit all parties involved in the healthcare industry. For example, data mining can help healthcare insurers detect fraud and abuse, healthcare organizations make customer relationship management decisions, physicians identify effective treatments and best practices, and patients receive better and more affordable healthcare services. The huge amounts of data generated by healthcare transactions are too complex and voluminous to be processed and analyzed by traditional methods. Data mining provides the methodology and technology to transform these mounds of data into useful information for decision making. This article explores data mining applications in healthcare. In particular, it discusses data mining and its applications within healthcare in major areas such as the evaluation of treatment effectiveness, management of healthcare, customer relationship management, and the detection of fraud and abuse. It also gives an illustrative example of a healthcare data mining application involving the identification of risk factors associated with the onset of diabetes. Finally, the article highlights the limitations of data mining and discusses some future directions.

  1. Shutdown and cleanup of the East German uranium ore mining industry

    International Nuclear Information System (INIS)

    Runge, W.; Boettcher, J.

    1994-01-01

    In late 1991, the company was changed from SDAG Wismut into a private company (GmbH under German law) with the sole purpose of cleaning up the decommissioned uranium ore mining and dressing plants in such a way that pollutants, contaminated soil, water and air, and other damage to the environment will be removed both from the plant premises and from associated real estate. (orig./HP) [de

  2. Do Investors Forecast Fat Firms? Evidence from the Gold Mining Industry

    OpenAIRE

    Borenstein, Severin; Farrell, Joseph

    2006-01-01

    JEL CODES: D21, G3, L2, L72 KEYWORDS: profit function, free cash flow, gold mining, x-efficiency, rent seeking, fat ABSTRACT: Conventional economic theory assumes that firms always minimize costs given the output they produce. News articles and interviews with executives, however, indicate that firms from time to time engage in cost-cutting exercises. One popular belief is that firms cut costs when they are in economic distress, and grow fat when they are relatively wealthy....

  3. Beating Obesity: Factors Associated with Interest in Workplace Weight Management Assistance in the Mining Industry

    OpenAIRE

    Street, Tamara D.; Thomas, Drew L.

    2016-01-01

    Background: Rates of overweight and obese Australians are high and continue to rise, putting a large proportion of the population at risk of chronic illness. Examining characteristics associated with preference for a work-based weight-loss program will enable employers to better target programs to increase enrolment and benefit employees' health and fitness for work. Methods: A cross-sectional survey was undertaken at two Australian mining sites. The survey collected information on employe...

  4. Risky business or not? FIFOs, sexual risk taking and the Australian mining industry.

    Science.gov (United States)

    O'Mullan, Cathy; Debattista, Joseph; Browne, Matthew

    2016-04-01

    Issue addressed The fly-in, fly-out (FIFO) and drive-in, drive-out (DIDO) models of mining in Australia have led to concerns about adverse health and psychosocial impacts. Despite speculation that increased levels of sexually transmitted infections (STIs) in Australia, including HIV, are associated with FIFO/DIDO work, we know little about sexual risk-taking behaviours in mining populations. This study explores differences in sexual risk taking and perceptions of risk between FIFO/DIDO miners and residential miners. Methods A cross-sectional survey was administered to a sample (n=444) of male miners working in Queensland, Australia. The self-completed survey contained 49 questions relating to knowledge, attitudes and behaviour and included demographic information and specific items related to sex and relationships. Results FIFO/DIDO status was not associated with any differential sexual risk-taking behaviours, except for an increased probability of reporting 'ever being diagnosed with an STI'; 10.8% of FIFO/DIDO respondents versus 3.6% of others (x(2) (1)=4.43, P=0.35). Conclusions Our results appear to counter anecdotal evidence that FIFO/DIDO miners engage in higher sexual risk behaviours when compared with residential miners. So what? Anecdotal evidence linking the rise of sexually transmitted infections with the FIFO/DIDO mining workforce could drive costly and unnecessary approaches to prevention. Further research, surveillance and monitoring are required to inform health promotion interventions.

  5. Using software to predict occupational hearing loss in the mining industry.

    Science.gov (United States)

    Azman, A S; Li, M; Thompson, J K

    2016-01-01

    Powerful mining systems typically generate high-level noise that can damage the hearing ability of miners. Engineering noise controls are the most desirable and effective control for overexposure to noise. However, the effects of these noise controls on the actual hearing status of workers are not easily measured. A tool that can provide guidance in assigning workers to jobs based on the noise levels to which they will be exposed is highly desirable. Therefore, the Pittsburgh Mining Research Division (PMRD) of the U.S. National Institute for Occupational Safety and Health (NIOSH) developed a tool to estimate in a systematic way the hearing loss due to occupational noise exposure and to evaluate the effectiveness of developed engineering controls. This computer program is based on the ISO 1999 standard and can be used to estimate the loss of hearing ability caused by occupational noise exposures. In this paper, the functionalities of this software are discussed and several case studies related to mining machinery are presented to demonstrate the functionalities of this software.

  6. Industrial contamination of soil related to some active and closed mine facilities in the Republic of Macedonia

    Directory of Open Access Journals (Sweden)

    Tasev Goran K.

    2015-01-01

    Full Text Available Several industrial pollution sources at the territory of the Republic of Macedonia, were studied, one Pb-Zn mine with mill, one copper mine with mill and copper leaching facility, as well as one former Pb-Zn smelting facility near the city of Veles and one Fe-Ni smelting facility near the city of Kavadarci. The concentrations of heavy metals at Veles hot-spot were in the range: 20÷1823 mg kg- 1Pb, 29÷2395 mg kg-1Zn, 28÷65 mgkg-1Cd, 27÷82 mg kg-1 Cu, 39÷164 mg kg-1Ni, 508÷938 mgkg-1Mn and 1.6÷3.8% Fe, all of them being above Dutch standard optimal values. The vicinity of the Feni plant displayed concentrations of heavy metals as follows: 16÷31 mg kg-1 Pb, 117÷286 mgkg-1 Zn, 13÷24 mg kg-1Co, 42÷119 mg kg-1 Cu, 158÷292 mg kg-1Ni, 119÷236 mg kg-1 Cr and 2.24÷3.79% Fe. Airborne dust measurements around the Zletovo mine displayed multiplexed above standard values, with an exception of nickel, there enrichment factors ranged from mediate ones such were those for copper of 20.8, cadmium of 28.7, arsenic of 32.5 up to high ones for zinc with 341.7 and lead 925. Soil samples around the Zletovo mine displayed: 19.3-76.9 g kg-1 Fe, 643-28000 mg kg-1 Mn, 42.3-529.66 mg kg-1 Pb and 138-3240 mg kg-1 Zn. Finally around the Bucim copper mine the results displayed the following findings: 13.1÷225 mg kg-1 As, 0.67÷17.9 mg kg-1 Cd, 30.1÷171 mg kg-1 Cr, 17.8÷1734 mg kg-1 Cu, 9.8÷69.4 mg kg-1 Ni, 46÷3456 mg kg-1 Pb, 88÷3438 mg kg-1 Zn, 169÷998 mg kg-1 Mn, 0.73÷5.02% Fe.

  7. Challenges in waste management and environmental restoration in the uranium mining industry

    International Nuclear Information System (INIS)

    Jarrell, J.

    2011-01-01

    Two components dominate the waste management efforts at conventional Canadian uranium mining and milling operations. These are the waste rock generated in the mining of ore as well as the mill tailings -- which are the residue solids remaining after uranium extraction. Much has changed in the management of these wastes over the years. Visually, current sites are generally more compact than those developed earlier, due to higher grade ores and less land disturbance. However, the more significant strides being made to better manage uranium mining wastes deal more with improved chemical and physical controls rather than those changes which are visible. Segregation of waste rock to separate out potentially problematic material within the more weakly mineralized halo surrounding the ore is now a core strategy. This segregation is based on both the waste rock's chemical and radiological characteristics. Better controls have also been introduced on tailings physical properties to minimize their permeability, along with better chemical controls to minimize tailings contaminant solubility. Efforts to engineer tailings properties are coupled with contrasting hydraulic conductivity between the consolidated tailings mass and surrounding geologic materials. This creates the necessary long-term containment controls built into modern tailings management facilities. Current challenges include selecting the correct decommissioning assumptions such as future land use and required environmental acceptance criteria, along with decisions as to when to carry out reclamation work in the life cycle of the mine and mill. Public discussion of restoration plans throughout the life of the facility is essential to build acceptable solutions. Along with challenges come successes. Most recently, improvements have been made in reducing treated water molybdenum and selenium levels. Other successes include the application of reverse osmosis technology on a large scale, recycling of uranium

  8. Challenges in waste management and environmental restoration in the uranium mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Jarrell, J. [Cameco Corp., Saskatoon, SK (Canada)

    2011-07-01

    Two components dominate the waste management efforts at conventional Canadian uranium mining and milling operations. These are the waste rock generated in the mining of ore as well as the mill tailings -- which are the residue solids remaining after uranium extraction. Much has changed in the management of these wastes over the years. Visually, current sites are generally more compact than those developed earlier, due to higher grade ores and less land disturbance. However, the more significant strides being made to better manage uranium mining wastes deal more with improved chemical and physical controls rather than those changes which are visible. Segregation of waste rock to separate out potentially problematic material within the more weakly mineralized halo surrounding the ore is now a core strategy. This segregation is based on both the waste rock's chemical and radiological characteristics. Better controls have also been introduced on tailings physical properties to minimize their permeability, along with better chemical controls to minimize tailings contaminant solubility. Efforts to engineer tailings properties are coupled with contrasting hydraulic conductivity between the consolidated tailings mass and surrounding geologic materials. This creates the necessary long-term containment controls built into modern tailings management facilities. Current challenges include selecting the correct decommissioning assumptions such as future land use and required environmental acceptance criteria, along with decisions as to when to carry out reclamation work in the life cycle of the mine and mill. Public discussion of restoration plans throughout the life of the facility is essential to build acceptable solutions. Along with challenges come successes. Most recently, improvements have been made in reducing treated water molybdenum and selenium levels. Other successes include the application of reverse osmosis technology on a large scale, recycling of uranium

  9. Entrepreneurial Learning a Practical Model from the Creative Industries

    Science.gov (United States)

    Rae, David

    2004-01-01

    Explores how entrepreneurial capability and identity are learned in the creative and media industries. This sector is of growing social and economic importance, and the majority of its employment and commercial activity takes place within small businesses. However, entrepreneurship in the creative industries and the related development of…

  10. Best Practices in School-to-Careers: The Automotive Industry.

    Science.gov (United States)

    National Employer Leadership Council, Washington, DC.

    This document highlights the school-to-careers (STC) partnerships connecting workplace experiences to classroom learning to prepare students for successful employment in the automotive industry. First, the current state of the automotive industry is reviewed and the role of STC in addressing automotive service needs is explained. Next, the…

  11. Heat stress management in hot mines

    CSIR Research Space (South Africa)

    Schutte, P

    2009-09-01

    Full Text Available consequences of excessive levels of occupational heat stress were recognized by the South African gold mining industry when the first death from heat stroke occurred in 1924 (1). Steps to combat the heat stress hazard were taken almost immediately... currently used in the South African mining industry. In South African mines, work environments having a wet-bulb temperature in excess of 27.4 °C are considered to be ‘hot’ and necessitate the introduction of practices to safeguard miners...

  12. Identifying industrial best practices for the waste minimization of low-level radioactive materials

    Energy Technology Data Exchange (ETDEWEB)

    Levin, V.

    1996-04-01

    In US DOE, changing circumstances are affecting the management and disposal of solid, low-level radioactive waste (LLW). From 1977 to 1991, the nuclear power industry achieved major reductions in solid waste disposal, and DOE is interested in applying those practices to reduce solid waste at DOE facilities. Project focus was to identify and document commercial nuclear industry best practices for radiological control programs supporting routine operations, outages, and decontamination and decommissioning activities. The project team (DOE facility and nuclear power industry representatives) defined a Work Control Process Model, collected nuclear power industry Best Practices, and made recommendations to minimize LLW at DOE facilities.

  13. Security practices and regulatory compliance in the healthcare industry.

    Science.gov (United States)

    Kwon, Juhee; Johnson, M Eric

    2013-01-01

    Securing protected health information is a critical responsibility of every healthcare organization. We explore information security practices and identify practice patterns that are associated with improved regulatory compliance. We employed Ward's cluster analysis using minimum variance based on the adoption of security practices. Variance between organizations was measured using dichotomous data indicating the presence or absence of each security practice. Using t tests, we identified the relationships between the clusters of security practices and their regulatory compliance. We utilized the results from the Kroll/Healthcare Information and Management Systems Society telephone-based survey of 250 US healthcare organizations including adoption status of security practices, breach incidents, and perceived compliance levels on Health Information Technology for Economic and Clinical Health, Health Insurance Portability and Accountability Act, Red Flags rules, Centers for Medicare and Medicaid Services, and state laws governing patient information security. Our analysis identified three clusters (which we call leaders, followers, and laggers) based on the variance of security practice patterns. The clusters have significant differences among non-technical practices rather than technical practices, and the highest level of compliance was associated with hospitals that employed a balanced approach between technical and non-technical practices (or between one-off and cultural practices). Hospitals in the highest level of compliance were significantly managing third parties' breaches and training. Audit practices were important to those who scored in the middle of the pack on compliance. Our results provide security practice benchmarks for healthcare administrators and can help policy makers in developing strategic and practical guidelines for practice adoption.

  14. A clean environment approach to uranium mining

    International Nuclear Information System (INIS)

    Grancea, Luminita

    2015-01-01

    A global and multi-faceted response to climate change is essential if meaningful and cost-effective progress is to be made in reducing the effects of climate change around the world. There is no doubt that the uranium mining sector has an important role to play in such a goal. Uranium is the raw material used to produce fuel for long-lived nuclear facilities, necessary for the generation of significant amounts of baseload low-carbon electricity for decades to come. Given expectations of growth in nuclear generating capacity and the associated uranium demand, enhancing awareness of leading practices in uranium mining is indispensable. Actors in the uranium mining sector operate in a complex world, throughout different geographies, and involving global supply chains. They manage climate-sensitive water, land and energy resources and balance the interests of various stakeholders. Managed well, uranium mining delivers sustainable value for economic growth, employment and infrastructure, with specific attention given to the preservation of the environment. In the early phases of the industry, however, downside risks existed, which created legacy environmental and health issues that still can be recalled today. This article addresses key aspects of modern uranium mining operations that have been introduced as regulations and practices have evolved in response to societal attitudes about health, safety and environmental protection. Such aspects of mine management were seldom, if ever, respected in the early stages of uranium mining. With the implementation of modern mine lifecycle parameters and regulatory requirements, uranium mining has become a leader in safety and environmental management. Today, uranium mining is conducted under significantly different circumstances and is now the most regulated and one of the safest forms of mining in the world. Experiences from modern uranium mines show that successful companies develop innovative strategies to manage all the

  15. Determining change in managerial practices implementation readiness in a gold mine / Yolandie Jansen van Vuuren

    OpenAIRE

    Jansen van Vuuren, Yolandie

    2011-01-01

    Performance Effectiveness Appraisal, Performance Effectiveness Review as well as Coaching and training are crucial elements of the performance management process included in a set of managerial competencies required by managers in a deep level gold mine in South Africa. This dissertation provides a contemporary review of performance management and gold mining in a South African deep level gold mine context. It provides a theoretical framework for the processes of Performance Effectiveness ...

  16. A Systems-Based Conceptual Framework for Assessing the Determinants of a Social License to Operate in the Mining Industry

    Science.gov (United States)

    Prno, Jason; Slocombe, D. Scott

    2014-03-01

    The concept of a "social license to operate" (SLO) was coined in the 1990s and gained popularity as one way in which "social" considerations can be addressed in mineral development decision making. The need for a SLO implies that developers require the widespread approval of local community members for their projects to avoid exposure to potentially costly conflict and business risks. Only a limited amount of scholarship exists on the topic, and there is a need for research that specifically addresses the complex and changeable nature of SLO outcomes. In response to these challenges, this paper advances a novel, systems-based conceptual framework for assessing SLO determinants and outcomes in the mining industry. Two strands of systems theory are specifically highlighted—complex adaptive systems and resilience—and the roles of context, key system variables, emergence, change, uncertainty, feedbacks, cross-scale effects, multiple stable states, thresholds, and resilience are discussed. The framework was developed from the results of a multi-year research project which involved international mining case study investigations, a comprehensive literature review, and interviews conducted with mining stakeholders and observers. The framework can help guide SLO analysis and management efforts, by encouraging users to account for important contextual and complexity-oriented elements present in SLO settings. We apply the framework to a case study in Alaska, USA before discussing its merits and challenges. We also illustrate knowledge gaps associated with applications of complex adaptive systems and resilience theories to the study of SLO dynamics, and discuss opportunities for future research.

  17. THE DASHBOARD - STRATEGIC MANAGEMENT TOOL OF ACTIVITIES IN THE COAL MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    DINA IONELA-CLAUDIA

    2014-02-01

    Full Text Available In order to achieve the objectives at all levels and categories of functions in the unit, use multiple information systems, including the dashboard which is one of the management tools that responds very well to the rationale and supporting data of management decisions complementary to those provided by other media. In this respect, we try to calculate indicators organization currently working compartments of the coal mining units and will propose a series of indicators whose calculation we consider would be necessary for a detailed presentation as activity carried out and the improvement of management.

  18. Noise-induced hearing loss prevention in the South African mining industry

    CSIR Research Space (South Africa)

    Edwards, A

    2010-08-01

    Full Text Available ftb oss En gin eer ign as sis tan t Fir st a id W ork er Ba nks ma n En vir on me nta l Offi cer Sha ft F ore ma n Ch an geh ou se Cle rk Gold mining occupations L ae q (d BA ) © CSIR 2010 Slide 12 Results... l le ad er Oc cup ati on al Tra cer Opencast coal occupations L ae q (d BA ) © CSIR 2010 Slide 13 Results Noise exposure levels in underground coal occupations 60 65 70 75 80 85 90 95 100 105 Co nti nu os mi ne r...

  19. Evaluation and upgrading of records of stress measurement data in the mining industry.

    CSIR Research Space (South Africa)

    Stacey, TR

    1998-06-01

    Full Text Available to tectonic inversion, Proc. Centennial Geocongress (1995), ed J.M.Barton Jnr and Y.E.Copperthwaite, Geological Society of South Africa, pp 452- 455. Gay, N.C. 1972. Virgin rock stresses at Doornfontein Gold Mine, Carletonville, South Africa, Journal... of Geology, Vol 80, pp 61-80. Gay, N.C. 1975. In-situ stress measurements in Southern Africa, Tectonophysics, Vol 29, pp 447-459. Handley, M.F. 1996. In-situ stress measurements taken near SVC raisebore on 109 level at Western Deep Levels Limited South...

  20. Mining and geologic characterization of calcareous resources for the cement industry in Uruguay

    International Nuclear Information System (INIS)

    De Santana, H.; Veroslavsky, G.; Sanchez, L.; Rossini, C.; Aubet, N.; Loureiro, J.; Gutierrez, L.

    2000-01-01

    The main objective of this work was the study of geological and mining potential that Uruguay has on limestone rocks rich in calcium and poor in magnesium and silica, which are considered primary requirements suitable for the manufacture of cement. The results obtained allow defining four major regions of the country that although do not include all occurrences of calcareous rocks, they do not constitute the most important areas concerning: rock quality, higher volumes and improved extraction possibilities. The areas are: Queguay, Minas, Carape and Treinta y tres