Root Causes and Impacts of Severe Accidents at Large Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Hoegberg, Lars

2013-04-15

The root causes and impacts of three severe accidents at large civilian nuclear power plants are reviewed: the Three Mile Island accident in 1979, the Chernobyl accident in 1986, and the Fukushima Daiichi accident in 2011. Impacts include health effects, evacuation of contaminated areas as well as cost estimates and impacts on energy policies and nuclear safety work in various countries. It is concluded that essential objectives for reactor safety work must be: (1) to prevent accidents from developing into severe core damage, even if they are initiated by very unlikely natural or man-made events, and, recognizing that accidents with severe core damage may nevertheless occur; (2) to prevent large-scale and long lived ground contamination by limiting releases of radioactive nuclides such as cesium to less than about 100 TBq. To achieve these objectives the importance of maintaining high global standards of safety management and safety culture cannot be emphasized enough. All three severe accidents discussed in this paper had their root causes in system deficiencies indicative of poor safety management and poor safety culture in both the nuclear industry and government authorities.

A simple assessment scheme for severe accident consequences using release parameters

Energy Technology Data Exchange (ETDEWEB)

Silva, Kampanart, E-mail: kampanarts@tint.or.th [Thailand Institute of Nuclear Technology, 16 Vibhavadi-Rangsit Rd., Latyao, Chatuchak, 10900 (Thailand); Okamoto, Koji [The University of Tokyo, 7-3-1 Hongo, Bunkyo, Tokyo 113-8654 (Japan)

2016-08-15

Highlights: • Nuclear accident consequence index can assess overall consequences of an accident. • Correlations between the index and release parameters are developed. • Relation between the index and release amount follows power function. • The exponent of the power function is the key to the relation. - Abstract: Nuclear accident consequence index (NACI) which can assess the overall consequences of a severe accident on people and the environment is developed based on findings from previous studies. It consists of three indices: radiation effect index, relocation index and decontamination index. Though the NACI can cover large range of consequences, its assessment requires extensive resources. The authors then attempt to simplify the assessment, by investigating the relations between the release parameters and the NACI, in order to use the release parameters for severe accident consequence assessment instead of the NACI. NACI and its components increase significantly when the release amount is increased, while the influences of the release period and the release starting time on the NACI are nearly negligible. Relations between the release amount and the NACI and its components follow simple power functions (y = ax{sup b}). The exponent of the power functions seems to be the key to the relations. The exponent of the relation between the release amount and the NACI was around 0.8–1.0 when the release amount is smaller than 100 TBq, and it increased to around 1.3–1.4 when the release amount is equal to or larger than 100 TBq.

131I release from a HTGR during the LOFC accident

International Nuclear Information System (INIS)

Foley, J.E.

1975-03-01

The time-dependent release of 131 I from both the core and the containment building of a high temperature gas-cooled (HTGR) reactor during the loss of forced coolant (LOFC) accident is studied. A simplified core release model is combined with a containment building release model so that the total amount of the isotope released to the environment can be calculated. The time-dependent release of 131 I from the core during the LOFC accident is primarily a function of the time-dependent core temperatures and the failed fuel release constants. The most important factor in calculating the amount of the isotope released to the environment is the total amount released into the containment building. (U.S.)

Radioactivity release vs probability for a steam generator tube rupture accident

International Nuclear Information System (INIS)

Buslik, A.J.; Hall, R.E.

1978-01-01

A calculation of the probability of obtaining various radioactivity releases from a steam generator tube rupture (SGTR) is presented. The only radioactive isotopes considered are Iodine-131 and Xe-133. The particular accident path considered consists of a double-ended guillotine SGTR followed by loss of offsite power (LOSP). If there is no loss of offsite power, and no system fault other than the SGTR, it is judged that the consequences will be minimal, since the amount of iodine released through the condenser air ejector is expected to be quite small; this is a consequence of the fact that the concentration of iodine in the vapor released from the condenser air ejector is very small compared to that dissolved in the condensate water. In addition, in some plants the condenser air ejector flow is automatically diverted to containment or a high-activity alarm. The analysis presented here is for a typical Westinghouse PWR such as described in RESAR-3S

Radionuclides release possibility analysis of MSR at various accident conditions

Energy Technology Data Exchange (ETDEWEB)

Lee, Choong Wie; Kim, Hee Reyoung [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

There are some accidents which go beyond our expectation such as Fukushima Daiichi nuclear disaster and amounts of radionuclides release to environment, so more effort and research are conducted to prevent it. MSR (Molten Salt Reactor) is one of GEN-IV reactor types, and its coolant and fuel are mixtures of molten salt. MSR has a schematic like figure 1 and it has different features with the solid fuel reactor, but most important and interesting feature of MSR is its many safety systems. For example, MSR has a large negative void coefficient. Even though power increases, the reactor slows down soon. Radionuclides release possibility of MSR was analyzed at various accident conditions including Chernobyl and Fukushima ones. The MSR was understood to prevent the severe accident by the negative reactivity coefficient and the absence of explosive material such as water at the Chernobyl disaster condition. It was expected to contain fuel salts in the reactor building and not to release radionuclides into environment even if the primary system could be ruptured or broken and fuel salts would be leaked at the Fukushima Daiichi nuclear disaster condition of earthquake and tsunami. The MSR, which would not lead to the severe accident and therefore prevents the fuel release to the environment at many expected scenarios, was thought to have priority in the aspect of accidents. A quantitative analysis and a further research are needed to evaluate the possibility of radionuclide release to the environment at the various accident conditions based on the simple comparison of the safety feature between MSR and solid fuel reactor.

Release fractions for Rocky Flats specific accidents

International Nuclear Information System (INIS)

Weiss, R.C.

1992-01-01

As Rocky Flats and other DOE facilities begin the transition process towards decommissioning, the nature of the scenarios to be studied in safety analysis will change. Whereas the previous emphasis in safety accidents related to production, now the emphasis is shifting to accidents related tc decommissioning and waste management. Accident scenarios of concern at Rocky Flats now include situations of a different nature and different scale than are represented by most of the existing experimental accident data. This presentation will discuss approaches at sign to use for applying the existing body of release fraction data to this new emphasis. Mention will also be made of ongoing efforts to produce new data and improve the understanding of physical mechanisms involved

The nuclear accidents: Causes and consequences

International Nuclear Information System (INIS)

Rochd, M.

1988-01-01

The author discussed and compared the real causes of T.M.I. and Chernobyl accidents and cited their consequences. To better understand how these accidents occurred, a brief description of PWR type (reactor type of T.M.I.) and of RBMK type (reactor type of Chernobyl) has been presented. The author has also set out briefly the safety analysis objectives and the three barriers established to protect the public against the radiological consequences. To distinguish failures that cause severe accidents and to analyze them in details, it is necessary to classify the accidents. There are many ways to do it according to their initiator event, or to their frequency, or to their degree of gravity. The safety criteria adopted by nuclear industry have been explained. These criteria specify the limits of certain physical parameters that should not be exceeded in case of incidents or accidents. To compare the real causes of T.M.I. and Chernobyl accidents, the events that led to both have been presented. As observed the main common contributing factors in both cases are that the operators did not pay attention to warnings and signals that were available to them and that they were not trained to handle these accident sequences. The essential conclusions derived from these severe accidents are: -The improvement of operators competence contribute to reduce the accident risks; -The rapid and correct diagnosis of real conditions at each point of the accidents permits an appropriate behavior that would bring the plant to a stable state; -Competent technical teams have to intervene and to assist the operators in case of emergency; -Emergency plans and an international collaboration are necessary to limit the accident risks. 11 figs. (author)

Determination of accident related release data

International Nuclear Information System (INIS)

Koch, W.; Nolte, O.; Lange, F.; Martens, R.

2004-01-01

For accident safety analyses, for the assessment of potential radiological consequences, for the review of current requirements of the Transport Regulations and for their possible further development as well as for the demonstration that radioactive materials such as LDM candidate material fulfil the regulatory requirements reliable release data following mechanical impact are required. This is definitely one of the demanding issues in the field of transport safety of radioactive materials. In this context special attention has to be paid to radioactive wastes immobilised in brittle materials, e.g. cement/concrete, glass, ceramics or other brittle materials such as fresh and spent fuel. In this presentation we report on a long-term experimental program aiming at improving the general physical understanding of the release process as well as the quantity and the quality of release data. By combining laboratory experiments using small scale test specimens with a few key scaling experiments with large scale test objects significant progress was achieved to meet this objective. The laboratory equipment enables the in-situ determination of the amount and aerodynamic size distribution of the airborne particles generated upon impact of the test specimen on a hard target. Impact energies cover the range experienced in transport accidents including aircraft accidents. The well defined experimental boundary conditions and the good reproducibility of the experimental procedure allowed for systematic studies to exactly measure the amount and aerodynamic size distribution of the airborne release and to quantify its dependence on relevant parameters such as energy input, material properties, and specimen geometry. The experimental program was performed within the scope of various national and international (e.g. EU-funded) projects. The small scale experiments with brittle materials revealed a pronounced universality of the airborne release in view of the material properties and

Transport of large particles released in a nuclear accident

International Nuclear Information System (INIS)

Poellaenen, R.; Toivonen, H.; Lahtinen, J.; Ilander, T.

1995-10-01

Highly radioactive particulate material may be released in a nuclear accident or sometimes during normal operation of a nuclear power plant. However, consequence analyses related to radioactive releases are often performed neglecting the particle nature of the release. The properties of the particles have an important role in the radiological hazard. A particle deposited on the skin may cause a large and highly non-uniform skin beta dose. Skin dose limits may be exceeded although the overall activity concentration in air is below the level of countermeasures. For sheltering purposes it is crucial to find out the transport range, i.e. the travel distance of the particles. A method for estimating the transport range of large particles (aerodynamic diameter d a > 20 μm) in simplified meteorological conditions is presented. A user-friendly computer code, known as TROP, is developed for fast range calculations in a nuclear emergency. (orig.) (23 refs., 13 figs.)

Transport of large particles released in a nuclear accident

Energy Technology Data Exchange (ETDEWEB)

Poellaenen, R; Toivonen, H; Lahtinen, J; Ilander, T

1995-10-01

Highly radioactive particulate material may be released in a nuclear accident or sometimes during normal operation of a nuclear power plant. However, consequence analyses related to radioactive releases are often performed neglecting the particle nature of the release. The properties of the particles have an important role in the radiological hazard. A particle deposited on the skin may cause a large and highly non-uniform skin beta dose. Skin dose limits may be exceeded although the overall activity concentration in air is below the level of countermeasures. For sheltering purposes it is crucial to find out the transport range, i.e. the travel distance of the particles. A method for estimating the transport range of large particles (aerodynamic diameter d{sub a} > 20 {mu}m) in simplified meteorological conditions is presented. A user-friendly computer code, known as TROP, is developed for fast range calculations in a nuclear emergency. (orig.) (23 refs., 13 figs.).

Organizational root causes for human factor accidents

International Nuclear Information System (INIS)

Dougherty, D.T.

1997-01-01

Accident prevention techniques and technologies have evolved significantly throughout this century from the earliest establishment of standards and procedures to the safety engineering improvements the fruits of which we enjoy today. Most of the recent prevention efforts focused on humans and defining human factor causes of accidents. This paper builds upon the remarkable successes of the past by looking beyond the human's action in accident causation to the organizational factors that put the human in the position to cause the accident. This organizational approach crosses all functions and all career fields

Comparison of the accident process, radioactivity release and ground contamination between Chernobyl and Fukushima-1

International Nuclear Information System (INIS)

Imanaka, Tetsuji; Hayashi, Gohei; Endo, Satoru

2015-01-01

In this report, we have reviewed the basic features of the accident processes and radioactivity releases that occurred in the Chernobyl accident (1986) and in the Fukushima-1 accident (2011). The Chernobyl accident was a power-surge accident that was caused by a failure of control of a fission chain reaction, which instantaneously destroyed the reactor and building, whereas the Fukushima-1 accident was a loss-of-coolant accident in which the reactor cores of three units were melted by decay heat after losing the electricity supply. Although the quantity of radioactive noble gases released from Fukushima-1 exceeded the amount released from Chernobyl, the size of land area severely contaminated by 137 Cesium ( 137 Cs) was 10 times smaller around Fukushima-1 compared with around Chernobyl. The differences in the accident process are reflected in the composition of the discharged radioactivity as well as in the composition of the ground contamination. Volatile radionuclides (such as 132 Te- 132 I, 131 I, 134 Cs and 137 Cs) contributed to the gamma-ray exposure from the ground contamination around Fukishima-1, whereas a greater variety of radionuclides contributed significantly around Chernobyl. When radioactivity deposition occurred, the radiation exposure rate near Chernobyl is estimated to have been 770 μGy h −1 per initial 137 Cs deposition of 1000 kBq m −2 , whereas it was 100 μGy h −1 around Fukushima-1. Estimates of the cumulative exposure for 30 years are 970 and 570 mGy per initial deposition of 1000 kBq m −2 for Chernobyl and Fukusima-1, respectively. Of these exposures, 49 and 98% were contributed by radiocesiums ( 134 Cs + 137 Cs) around Chernobyl and Fukushima-1, respectively

Mesoscale modelling of radioactive contamination formation in Ukraine caused by the Chernobyl accident

International Nuclear Information System (INIS)

Talerko, Nikolai

2005-01-01

This work is devoted to the reconstruction of time-dependent radioactive contamination fields in the territory of Ukraine in the initial period of the Chernobyl accident using the model of atmospheric transport LEDI (Lagrangian-Eulerian DIffusion model). The modelling results were compared with available 137 Cs air and ground contamination measurement data. The 137 Cs atmospheric transport over the territory of Ukraine was simulated during the first 12 days after the accident (from 26 April to 7 May 1986) using real aerological information and rain measurement network data. The detailed scenario of the release from the accidental unit of the Chernobyl nuclear plant has been built (including time-dependent radioactivity release intensity and time-varied height of the release). The calculations have enabled to explain the main features of spatial and temporal variations of radioactive contamination fields over the territory of Ukraine on the regional scale, including the formation of the major large-scale spots of radioactive contamination caused by dry and wet deposition

An initial assessment of the Chernobyl-4 reactor accident release source

International Nuclear Information System (INIS)

Macdonald, H.F.; ApSimon, H.M.; Wilson, J.J.N.

1986-07-01

The long-range atmospheric dispersion model MESOS has been used to provide a preliminary evaluation of the effects over Western Europe of radioactivity released during the accident which occurred at the Chernobyl-4 reactor in the USSR in April 1986. The results of this analysis have been compared with observations during the first week or so following the accident of airborne contamination levels at a range of locations across Europe in order to obtain an estimate of accident release source. The work presented here was performed during the 6-8 weeks following the accident and the results obtained will be subject to refinement as more detailed data become available. However, at this early stage they indicate a release source for the Chernobyl accident, expressed as a fraction of the estimated reactor core inventory, of approx. 15-20% of the iodine and caesium isotopes, approx. 1% of the ruthenium and lesser amounts of the other fission products and actinides, together with an implied major fraction of the krypton and xenon noble gases. (author)

Noble gas control room accident filtration system for severe accident conditions (N-CRAFT)

International Nuclear Information System (INIS)

Hill, Axel; Stiepani, Cristoph; Drechsler, Michael

2015-01-01

Severe accidents might cause the release of airborne radioactive substances to the environment of the NPP either due to containment leakages or due to intentional filtered containment venting. In the latter case aerosols and iodine are retained, however noble gases are not retainable by the FCVS or by conventional air filtration systems like HEPA filters and iodine absorbers. Radioactive noble gases nevertheless dominate the activity release depending on the venting procedure and the weather conditions. To prevent unacceptable contamination of the control room atmosphere by noble gases, AREVA GmbH has developed a noble gas control room accident filtration system (CRAFT) which can supply purified fresh air to the control room without time limitation. The retention process is based on dynamic adsorption of noble gases on activated carbon. The system consists of delay lines (carbon columns) which are operated by a continuous and simultaneous adsorption and desorption process. CRAFT allows minimization of the dose rate inside the control room and ensures low radiation exposure to the staff by maintaining the control room environment suitable for prolonged occupancy throughout the duration of the accident. CRAFT consists of a proven modular design either transportable or permanently installed. (author)

Massive radioactive releases have a great impact on the accident costs

International Nuclear Information System (INIS)

Pascucci-Cahen, L.; Momal, P.

2013-01-01

This article investigates the costs of the consequences of a nuclear accident. The importance of the costs is very dependant on the amount of radioactivity released in the environment during the accident. 2 severe accidents are considered, each accident involves the fusion of the core but the first is characterized by a limited amount of radioactivity released in the atmosphere while the second involves massive radioactive releases. The list of consequences is as comprehensive as possible: site decontamination and dismantlement, land decontamination, sanitary impacts, population displacement, agricultural and economical losses, impact on tourism, impact on the production of electricity...In the first case the total cost reaches 120 billion euros which is still manageable at the scale of a country whereas in the second case the bill reaches 430 billion euros which is unbearable for a country. The very slight probability of such events does not compensate for their catastrophic potentials. (A.C.)

The Chernobyl accidents: Causes and Consequences

International Nuclear Information System (INIS)

Chihab-Eddine, A.

1988-01-01

The objective of this communication is to discuss the causes and the consequences of the Chernobyl accident. To facilitate the understanding of the events that led to the accident, the author gave a simplified introduction to the important physics that goes on in a nuclear reactor and he presented a brief description and features of chernobyl reactor. The accident scenario and consequences have been presented. The common contribution factors that led to both Three Mile Island and Chernobyl accidents have been pointed out.(author)

The causes of the Chernobyl accident

International Nuclear Information System (INIS)

Frot, J.

2001-01-01

For the man in the street Chernobyl epitomizes the danger of nuclear energy but when we examine the causes of this accident we see that this drama is not intrinsically linked to the production of electricity from nuclear fission. The author sees 2 components in the Chernobyl event: the accident itself and its sanitary consequences. The author considers 3 main causes to the accident: -) a design that makes the reactor difficult to control, -) a series of 6 humane failures or breaking of operating rules, and -) political reasons: the largest possible budget was dedicated to plutonium production so any improvement for safety was considered as costly and secondary, moreover the religion of secrecy which was well spread in the ancient Soviet Union, prevented any scientific from knowing all the information concerning this type of reactor. As for the sanitary consequences, the author considers direct causes and underlying causes. The lack of information for the local population, the delay taken for iodine distribution or for the interdiction of farm products consumption are included in the direct causes. The slowness of Soviet bureaucracy, tight budgets and politico-scientific disputes are quoted among the underlying causes. (A.C.)

Industrial accidents triggered by lightning.

Science.gov (United States)

Renni, Elisabetta; Krausmann, Elisabeth; Cozzani, Valerio

2010-12-15

Natural disasters can cause major accidents in chemical facilities where they can lead to the release of hazardous materials which in turn can result in fires, explosions or toxic dispersion. Lightning strikes are the most frequent cause of major accidents triggered by natural events. In order to contribute towards the development of a quantitative approach for assessing lightning risk at industrial facilities, lightning-triggered accident case histories were retrieved from the major industrial accident databases and analysed to extract information on types of vulnerable equipment, failure dynamics and damage states, as well as on the final consequences of the event. The most vulnerable category of equipment is storage tanks. Lightning damage is incurred by immediate ignition, electrical and electronic systems failure or structural damage with subsequent release. Toxic releases and tank fires tend to be the most common scenarios associated with lightning strikes. Oil, diesel and gasoline are the substances most frequently released during lightning-triggered Natech accidents. Copyright © 2010 Elsevier B.V. All rights reserved.

Nuclear Reactor RA Safety Report, Vol. 13, Causes of possible accidents

International Nuclear Information System (INIS)

1986-11-01

This volume includes the analysis of possible accidents on the RA research reaktor. Any unwanted action causing decrease of integrity of any of the reactor safety barriers is considered to be a reactor accident. Safety barriers are: fuel element cladding, reactor vessel, biogical shield, and reactor building. Reactor accidents can be classified in four categories: (1) accidents caused by reactivity changes; (2) accidents caused by mis function of the cooling system; (3) accidents caused by errors in fuel management and auxiliary systems; (4) accidents caused by natural or other external disasters. The analysis of possible causes of reactor accidents includes the analysis of possible impacts on the reactor itself and the environment [sr

Study on mitigation of in-vessel release of fission products in severe accidents of PWR

International Nuclear Information System (INIS)

Huang, G.F.; Tong, L.L.; Li, J.X.; Cao, X.W.

2010-01-01

Research highlights: → In-vessel release of fission products in severe accidents for 600 MW PWR is analyzed. → Mitigation effect of primary feed-and-bleed on in-vessel release is investigated. → Mitigation effect of secondary feed-and-bleed on in-vessel release is studied. → Mitigation effect of ex-vessel cooling on in-vessel release is evaluated. - Abstract: During the severe accidents in a nuclear power plant, large amounts of fission products release with accident progression, including in-vessel and ex-vessel release. Mitigation of fission products release is demanded for alleviating radiological consequence in severe accidents. Mitigation countermeasures to in-vessel release are studied for Chinese 600 MW pressurized water reactor (PWR), including feed-and-bleed in primary circuit, feed-and-bleed in secondary circuit and ex-vessel cooling. SBO, LOFW, SBLOCA and LBLOCA are selected as typical severe accident sequences. Based on the evaluation of in-vessel release with different startup time of countermeasure, and the coupling relationship between thermohydraulics and in-vessel release of fission products, some results are achieved. Feed-and-bleed in primary circuit is an effective countermeasure to mitigate in-vessel release of fission products, and earlier startup time of countermeasure is more feasible. Feed-and-bleed in secondary circuit is also an effective countermeasure to mitigate in-vessel release for most severe accident sequences that can cease core melt progression, e.g. SBO, LOFW and SBLOCA. Ex-vessel cooling has no mitigation effect on in-vessel release owing to inevitable core melt and relocation.

Preventing marine accidents caused by technology-induced human error

OpenAIRE

Bielić, Toni; Hasanspahić, Nermin; Čulin, Jelena

2017-01-01

The objective of embedding technology on board ships, to improve safety, is not fully accomplished. The paper studies marine accidents caused by human error resulting from improper human-technology interaction. The aim of the paper is to propose measures to prevent reoccurrence of such accidents. This study analyses the marine accident reports issued by Marine Accidents Investigation Branch covering the period from 2012 to 2014. The factors that caused these accidents are examined and categor...

Causes of Accidents Near Accelerators and Radiation Protection Arrangements; Causes d'accidents aupres des accelerateurs et dispositions de radioprotection

Energy Technology Data Exchange (ETDEWEB)

Joffre, H; Vialettes, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

The authors present, first, some typical accidents mentioned in bibliography or happened in CEA Research Centers. The accidents are analysed to precise the main cause and get some experience. Then the authors study the interest of a centralized control for security, detection and signalling devices used near every important accelerator. (author) [French] Les auteurs presentent, tout d'abord, quelques accidents typiques rapportes dans la bibliographie ou survenus dans les Centres de Recherches du CEA. Ces accidents sont analyses pour en preciser la cause principale et en degager les enseignements. Enfin les auteurs etudient l'interet d'un controle centralise des dispositifs de securite, de detection et de signalisation mis en oeuvre aupres de tout accelerateur important. (auteur)

Preliminary worst-case accident analysis to support the conceptual design of a potential repository in tuff

International Nuclear Information System (INIS)

Jackson, J.L.; Gram, H.F.; Hong, K.J.; Ng, H.S.; Pendergrass, A.M.

1984-01-01

The Nevada Waste Storage Investigations (NNWSI) Project is conducting investigations to determine suitability of a site at Yucca Mountain for development as a high-level waste repository. In support of conceptual design, a preliminary analysis has been performed to identify events that could cause radiological releases from the surface facilities during the operations period. Accidental releases were modeled short-duration release plumes, dispersed under averaged climatic conditions, using the AIRDOS-EPA code. consequences of these accidents, in 50-yr integrated dose commitments to operations personnel, to the minimally exposed member of the public, and to the general population in the surrounding area were calculated. risk to the general public from each event was also assessed. All postulated accidents result in doses to pers of the public that are lower than the 0.5 rem/accident limit set by the NRC in 10 CFR 60. For those accidents that do not involve both fire and breach of waste canisters, doses to operations personnel are behind the NRC limit for routine operations of 5 rem/yr set in 10 CFR 20. Accidents that involve fire and breach of waste canisters may cause doses to some operations personnel that are in excess of this limit

Consequences of tritium release to water pathways from postulated accidents in a DOE production reactor

International Nuclear Information System (INIS)

O'Kula, K.R.; Olson, R.L.; Hamby, D.M.

1991-01-01

A full-scale PRA of a DOE production reactor has been completed that considers full release of tritium as part of the severe accident source term. Two classes of postulated reactor accidents, a loss-of-moderator pumping accident and a loss-of-coolant accident, are used to bound the expected dose consequence from liquid pathway release. Population doses from the radiological release associated with the two accidents are compared for aqueous discharge and atmospheric release modes. The expectation values of the distribution of possible values for the societal effective dose equivalent to the general public, given a tritium release to the atmosphere, is 2.8 person-Sv/PBq (9.9 x 10 -3 person-rem/Ci). The general public drinking water dose to downstream water consumers is 6.5 x 10 -2 person-Sv/Pbq (2.4 x 10 -4 person-rem/Ci) for aqueous releases to the surface streams eventually reaching the Savannah River. Negligible doses are calculated for freshwater fish and saltwater invertebrate consumption, irrigation, and recreational use of the river, given that an aqueous release is assumed to occur. Relative to the balance of fission products released in a hypothetical severe accident, the tritium-related dose is small. This study suggests that application of regional models (1610 km radius) will indicate larger dose consequences from short-term tritium release to the atmosphere than from comparable tritium source terms to water pathways. However, the water pathways assessment is clearly site-specific, and the overall aqueous dose will be dependent on downstream receptor populations and uses of the river

TOXRISK, Toxic Gas Release Accident Analysis

International Nuclear Information System (INIS)

Bennett, D.E.; Chanin, D.I.; Shiver, A.W.

1993-01-01

1 - Description of program or function: TOXRISK is an interactive program developed to aid in the evaluation of nuclear power plant control room habitability in the event of a nearby toxic material release. The program uses a model which is consistent with the approach described in the NRC Regulatory Guide 1.78. Release of the gas is treated as an initial puff followed by a continuous plume. The relative proportions of these as well as the plume release rate are supplied by the user. Transport of the gas is modeled as a Gaussian distribution and occurs through the action of a constant velocity, constant direction wind. Great flexibility is afforded the user in specifying the release description, meteorological conditions, relative geometry of the accident and plant, and the plant ventilation system characteristics. Two types of simulation can be performed: multiple case (parametric) studies and probabilistic analyses. Upon execution, TOXRISK presents a menu, and the user chooses between the Data Base Manager, the Multiple Case program, and the Probabilistic Study Program. The Data Base Manager provides a convenient means of storing, retrieving, and modifying blocks of data required by the analysis programs. The Multiple Case program calculates resultant gas concentrations inside the control room and presents a summary of information that describes the event for each set of conditions given. Optimally, a time history profile of inside and outside concentrations can also be produced. The Probabilistic Study program provides a means for estimating the annual probability of operator incapacitation due to toxic gas accidents on surrounding transportation routes and storage sites. 2 - Method of solution: Dispersion or diffusion of the gas during transport is described by modified Pasquill-Gifford dispersion coefficients

A description of nuclear reactor accidents and their consequences

International Nuclear Information System (INIS)

Murray, A.

1989-01-01

Nuclear reactor accidents which have caused core damage, released a significant amount of radioactivity, or caused death or serious injury are described. The reactor accidents discussed in detail include Chernobyl, Three Mile Island, SL-1 and Windscale, although information on other less consequential accidents is also provided. The consequences of these accidents are examined in terms of the amounts of radioactivity released, the radiation doses received, and remedial actions and interventions taken following the accident. 10 refs., 1 fig., 2 tabs

Determining cutoff distances for assessing risks from transportation accident radiation releases

International Nuclear Information System (INIS)

Sandquist, G.M.; Slaughter, D.M.; Kimura, C.Y.; Brumburgh, G.

1995-01-01

The transportation of radioactive materials throughout the United States and the world is a ubiquitous and sometimes controversial activity. Almost universally, these transportation activities have been performed without major incident, and the safety record for transportation of radioactive material is outstanding compared with the transportation of other hazardous materials. Nevertheless, concerns still exist regarding adequate regulation of radioactive material transportation and accurate assessment of the health risks associated with accidents. These concerns are addressed through certification by the cognizant regulatory authority over the transportation container or the performance of a transportation risk assessment. In a transportation risk assessment, accident situations are examined, frequencies are estimated, and consequences resulting from the accident are analyzed and evaluated for acceptance. A universal question with any transportation risk assessment that examines the radiological consequences from release accidents is, At what distance may the dispersion analysis be terminated? This paper examines cutoff distances and their consequences for assessing health risks from radiological transportation releases

The causing model of accidents and preventing system of small mines

Energy Technology Data Exchange (ETDEWEB)

Cao, S.; Zhang, L.; Liu, Y.; Li, Y. [Chongqing University, Chongqing (China)

2008-06-15

From an analysis of data on fatal accidents in small coal mines in a southern region of China over a period of three years, the time and type of accidents was discussed by applying statistical methods. It is shown that accidents frequently occur at the end of spring and all through summer. Roof accidents and gas disasters constitute severe accidents and traffic accidents are also important. It was found that most accidents are caused by dangerous behaviour of personnel and the unsafe state of equipment combined with economic interest. The three-factor causing model (TFC model) was proposed. Unsafe behaviour is a direct cause influenced by staff and workers while the unsafe nature of equipment is an indirect cause of accidents influence by natural conditions and the level of technical equipment in the mines. A system of accident prevention in small coal collieries was established with the TFC model. In this, scientific management is an important factor. 13 refs., 4 figs., 1 tab.

Release and transport of fission product cesium in the TMI-2 accident

International Nuclear Information System (INIS)

Lorenz, R.A.; Collins, J.L.

1986-01-01

Approximately 50% of the fission product cesium was released from the overheated UO 2 fuel in the TMI-2 accident. Steam that boiled away from a water pool in the bottom of the reactor vessel transported the released fission products throughout the reactor coolant system (RCS). Some fission products passed directly through a leaking valve with steam and water into the containment structure, but most deposited on dry surfaces inside of the RCS before being dissolved or resuspended when the RCS was refilled with water. A cesium transport model was developed that extended measured cesium in the RCS back to the first day of the accident. The model revealed that ∼62% of the released 137 Cs deposited on dry surfaces inside of the RCS before being slowly leached and transported out of the RCS in leaked or letdown water. The leach rates from the model agreed reasonably well with those measured in the laboratory. The chemical behavior of cesium in the TMI-2 accident agreed with that observed in fission product release tests at Oak Ridge National Laboratory (ORNL)

HOTSPOT, Field Evaluation of Radiation Release from Nuclear Accident

International Nuclear Information System (INIS)

2001-01-01

1 - Description of program or function: The HOTSPOT Health Physics codes were created to provide Health Physics personnel with a fast, field-portable calculational tool for evaluating accidents involving radioactive materials. HOTSPOT codes are a first-order approximation of the radiation effects associated with the atmospheric release of radioactive materials. HOTSPOT programs are reasonably accurate for a timely initial assessment. More importantly, HOTSPOT codes produce a consistent output for the same input assumptions and minimize the probability of errors associated with reading a graph incorrectly or scaling a universal nomogram during an emergency. Four general programs, PLUME, EXPLOSION, FIRE, and RESUSPENSION, calculate a downwind assessment following the release of radioactive material resulting from a continuous or puff release, explosive release, fuel fire, or an area contamination event. Other programs deal with the release of plutonium, uranium, and tritium to expedite an initial assessment of accidents involving nuclear weapons. Additional programs estimate the dose commitment from inhalation of any one of the radionuclides listed in the database of radionuclides, calibrate a radiation survey instrument for ground survey measurements, and screening of plutonium uptake in the lung. The HOTSPOT codes are fast, portable, easy to use, and fully documented. HOTSPOT supports color high resolution monitors and printers for concentration plots and contours. The codes have been extensively used by the DOS community since 1985. Version 8 allows users to add their own custom radionuclide library and to create custom radionuclide mixtures. It also includes wet deposition to approximate the enhanced plume depletion and ground deposition due to the effects of rain. Additional release geometry options for TRITIUM RELEASE and GENERAL PLUME were added, as well as several other enhancements and improvements. See info (f1) from the main HOTSPOT menu for additional

Incidence of cerebrovascular accidents in patients undergoing minimally invasive valve surgery.

Science.gov (United States)

LaPietra, Angelo; Santana, Orlando; Mihos, Christos G; DeBeer, Steven; Rosen, Gerald P; Lamas, Gervasio A; Lamelas, Joseph

2014-07-01

Minimally invasive valve surgery has been associated with increased cerebrovascular complications. Our objective was to evaluate the incidence of cerebrovascular accidents in patients undergoing minimally invasive valve surgery. We retrospectively reviewed all the minimally invasive valve surgery performed at our institution from January 2009 to June 2012. The operative times, lengths of stay, postoperative complications, and mortality were analyzed. A total of 1501 consecutive patients were identified. The mean age was 73 ± 13 years, and 808 patients (54%) were male. Of the 1501 patients, 206 (13.7%) had a history of a cerebrovascular accident, and 225 (15%) had undergone previous heart surgery. The procedures performed were 617 isolated aortic valve replacements (41.1%), 658 isolated mitral valve operations (43.8%), 6 tricuspid valve repairs (0.4%), 216 double valve surgery (14.4%), and 4 triple valve surgery (0.3%). Femoral cannulation was used in 1359 patients (90.5%) and central cannulation in 142 (9.5%). In 1392 patients (92.7%), the aorta was clamped, and in 109 (7.3%), the surgery was performed with the heart fibrillating. The median aortic crossclamp and cardiopulmonary bypass times were 86 minutes (interquartile range [IQR], 70-107) minutes and 116 minutes (IQR, 96-143), respectively. The median intensive care unit length of stay was 47 hours (IQR, 29-74), and the median postoperative hospital length of stay was 7 days (IQR, 5-10). A total of 23 cerebrovascular accidents (1.53%) and 38 deaths (2.53%) had occurred at 30 days postoperatively. Minimally invasive valve surgery was associated with an acceptable stroke rate, regardless of the cannulation technique. Copyright © 2014 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

Obstructive sleep apnoea syndrome as a cause of road traffic accidents.

Science.gov (United States)

Aguiar, M; Valença, J; Felizardo, M; Caeiro, F; Moreira, S; Staats, R; Bugalho de Almeida, A A

2009-01-01

Several studies have demonstrated that obstructive sleep apnoea syndrome (OSAS) patients have a higher rate of road traffic accidents. Our study aimed to analyse any differences in OSAS patients between those who reported having had road traffic accidents and/or near misses and those who did not. We studied 163 patients with OSAS (apnoea- hypopnoea index (AHI)>10/h) diagnosed using nocturnal polysomnography (NPSG), all drivers, 18.4% of whom drove for a living. Patients were asked at their first clinical interview to self-report road traffic accidents and/or near misses over the past 3 years which had been caused by abnormal daytime drowsiness. This allowed patients to be divided into two groups, those who had had road traffic accidents and/or near misses and those who had not. Both were compared as to age, body mass index (BMI), Epworth Sleepiness Scale (ESS), daytime PaO2 and PaCO2, Functional Outcomes of Sleep Questionnaire (FOSQ) test and NPSG data. This latter was total sleep time (TTS), sleep efficiency, sleep stages, arousal index (ARI), AHI, minimal and average SaO2, % of time with SaO2 TDAH) (T test). Group I (no road traffic accidents) No=89 patients; group II (road traffic accidents) No=74 patients. Age (years) was 57.6+/-11.8 vs. 54.7+/-10.9 (ns); male gender, 75% vs. 78.4%; ESS, 12.3+/-5.4 vs. 17.6+/-4.3 (pTDAH (minutes), 98.5+/-63.7 vs. 133.3+/-83.2 (p=0,005). In our experience patients who had road traffic accidents and/or near misses had a more severe OSAS, with higher AHI, excessive daytime sleepiness and lower quality of life.

Radionuclide release rate inversion of nuclear accidents in nuclear facility based on Kalman filter

International Nuclear Information System (INIS)

Tang Xiuhuan; Bao Lihong; Li Hua; Wan Junsheng

2014-01-01

The rapidly and continually back-calculating source term is important for nuclear emergency response. The Gaussian multi-puff atmospheric dispersion model was used to produce regional environment monitoring data virtually, and then a Kalman filter was designed to inverse radionuclide release rate of nuclear accidents in nuclear facility and the release rate tracking in real time was achieved. The results show that the Kalman filter combined with Gaussian multi-puff atmospheric dispersion model can successfully track the virtually stable, linear or nonlinear release rate after being iterated about 10 times. The standard error of inversion results increases with the true value. Meanwhile extended Kalman filter cannot inverse the height parameter of accident release as interceptive error is too large to converge. Kalman filter constructed from environment monitoring data and Gaussian multi-puff atmospheric dispersion model can be applied to source inversion in nuclear accident which is characterized by static height and position, short and continual release in nuclear facility. Hence it turns out to be an alternative source inversion method in nuclear emergency response. (authors)

The causes of the Chernobyl accident; Les causes de l'evenement Tchernobyl

Energy Technology Data Exchange (ETDEWEB)

Frot, J. [Societe Francaise d' Energie Nucleaire (SFEN), 75 - Paris (France)

2001-06-01

For the man in the street Chernobyl epitomizes the danger of nuclear energy but when we examine the causes of this accident we see that this drama is not intrinsically linked to the production of electricity from nuclear fission. The author sees 2 components in the Chernobyl event: the accident itself and its sanitary consequences. The author considers 3 main causes to the accident: -) a design that makes the reactor difficult to control, -) a series of 6 humane failures or breaking of operating rules, and -) political reasons: the largest possible budget was dedicated to plutonium production so any improvement for safety was considered as costly and secondary, moreover the religion of secrecy which was well spread in the ancient Soviet Union, prevented any scientific from knowing all the information concerning this type of reactor. As for the sanitary consequences, the author considers direct causes and underlying causes. The lack of information for the local population, the delay taken for iodine distribution or for the interdiction of farm products consumption are included in the direct causes. The slowness of Soviet bureaucracy, tight budgets and politico-scientific disputes are quoted among the underlying causes. (A.C.)

On the sequence of core-melt accidents: Fission product release, source terms and Chernobyl release

Energy Technology Data Exchange (ETDEWEB)

Albrecht, H

1986-01-01

There is a sketch of our ideas on the course of a core melt-out accident in a PWR. There is then a survey of the most important results on fission product release, which were obtained by experiments on the SASCHA melt-out plant. The 3rd part considers questions which are important for determining source terms for the environment and the last part contains some considerations on radioactivity release from the Chernobyl reactor.

Causes of Accidents among Commercial Motorcyclists (Okada) in ...

African Journals Online (AJOL)

Motor cycle accidents have become the most serious problem threatening the entire Nigerian population. It is against this background that this study attempted to investigate the causes of accidents among commercial motorcyclists in Borno State, Nigeria. The population of the study consisted of all the commercial ...

Characteristics of the aerosols released to the environment after a severe PWR accident

International Nuclear Information System (INIS)

Lhiaubet, G.; Manesse, D.

1988-05-01

In the event of a postulated severe accident on a pressurized water reactor (PWR) involving fuel degradation, gases and aerosols containing radioactive products could be released, with short, medium and long term consequences for the population and the environment. Under such accident conditions, the ESCADRE code system, developed at IPSN (Institute for Nuclear Safety and Protection) can be used to calculate the properties of the substances released and, especially with the AEROSOLS/B2 code, the main characteristics of the aerosols (concentration, size distribution, composition). For conditions representative of severe PWR accidents, by varying different main parameters (structural material aerosols, steam condensation in the containment, etc...), indications are given on the range of characteristics of the aerosols (containing notably Cs, Te, Sr, Ru, etc...) released to the atmosphere. Information is also given on how more accurate data (especially on the chemical forms) will be obtainable in the framework of current or planned experimental programs (HEVA, PITEAS, PHEBUS PF, etc...) [fr

Environmental consequences of releases from nuclear accidents

International Nuclear Information System (INIS)

Tveten, U.

1990-01-01

The primary purpose of this report is to present the results of a four-year Nordic cooperation program in the area of consequence assessment of nuclear accidents with large releases to the environment. This program was completed in 1989. Related information from other research programs has also been described, so that many chapters of the report reflect the current status in the respective areas, in addition to containing the results of the Nordic program. (author) 179 refs

Prevention of the causes and consequences of a criticality accident - measures adopted in France; Prevention des causes et des consequences d'un accident de criticite - solutions adoptees en France

Energy Technology Data Exchange (ETDEWEB)

Fruchard, Y; Lavie, J M

1966-07-01

The question of safety in regard to criticality accident risks has two aspects: prevention of the cause and limitation of the consequences. These two aspects are closely connected. The effort devoted to prevention of the causes depends on the seriousness of the possible human psychologic and economic consequences of the accident. The criticality accidents which have occurred in the nuclear industry, though few in number, do reveal the imperfect nature of the techniques adopted to prevent the causes, and also constitute the only available realistic basis for evaluating the consequences and developing measures to limit them. The authors give a analysis of the known causes and consequences of past criticality accidents and on this basis make a number of comments concerning: the validity of traditional safety criteria, the probability of accidents for different types of operations, characteristic accidents which can serve as models, and the extent of possible radiological consequences. The measures adopted in France to limit the consequences of a possible criticality accident under the headings: location, design and lay-out of the installations, accident detection, and dosimetry for the exposed personnel, are briefly described after a short account of the criteria used in deciding on them. (author) [French] La surete relative aux risques d'accidents de criticite presente deux aspects: la prevention des causes et les parades aux consequences. Ces deux aspects sont tres lies. L'effort consenti a la prevention des causes decoule de l'importance des consequences humaines economiques et psychologiques possibles d'un eventuel accident. Les accidents de criticite survenus dans l'industrie nucleaire, malgre leur rarete, d'une part devoilent les imperfections des techniques de prevention des causes, d'autre part constituent la seule base realiste disponible d'evaluation des consequences et de mise au point des parades a ces consequences. Les auteurs presentent une analyse des

Human error as the root cause of severe accidents at nuclear reactors

International Nuclear Information System (INIS)

Kovács Zoltán; Rýdzi, Stanislav

2017-01-01

A root cause is a factor inducing an undesirable event. It is feasible for root causes to be eliminated through technological process improvements. Human error was the root cause of all severe accidents at nuclear power plants. The TMI accident was caused by a series of human errors. The Chernobyl disaster occurred after a badly performed test of the turbogenerator at a reactor with design deficiencies, and in addition, the operators ignored the safety principles and disabled the safety systems. At Fukushima the tsunami risk was underestimated and the project failed to consider the specific issues of the site. The paper describes the severe accidents and points out the human errors that caused them. Also, provisions that might have eliminated those severe accidents are suggested. The fact that each severe accident occurred on a different type of reactor is relevant – no severe accident ever occurred twice at the same reactor type. The lessons learnt from the severe accidents and the safety measures implemented on reactor units all over the world seem to be effective. (orig.)

Cause finding experiments and environmental analysis on the accident of the fire and explosion in TRP bituminization facility

International Nuclear Information System (INIS)

Fujine, Sachio; Murata, Mikio; Abe, Hitoshi

1999-09-01

This report is the summary of the cause finding experiments and environmental analysis on the accident of the fire and explosion occurred at March 11th, 1997, in TRP bituminization facility of PNC (Power Reactor and Nuclear Fuel Development Corporation). Regarding the cause finding experiments, chemical components have been analyzed for the effluent samples taken from PNC's facility, bituminized mock waste has been produced using the simulated salt effluent prepared according to the results of chemical analysis, thermal analysis and experiment of runaway exothermic reaction have been conducted using the mock waste, and the component of flammable gases emitted from the heated waste have been collected and analyzed. Regarding environmental analysis on the accident, the amount of radioactive cesium released by the accident has been calculated by the comparative analysis using the atmospheric dispersion simulation code SPEEDI with the data of environmental monitoring and the public dose has been assessed. (author)

Causes of road traffic accidents in Juba

Directory of Open Access Journals (Sweden)

Akway M. Cham

2017-05-01

Full Text Available Introduction: Road traffic accidents (RTAs are a major cause of death and disability in South Sudan. The purpose of this study was to investigate whether violation of traffic rules is the main cause of RTAs. Method: A cross sectional study design was used with quantitative data covering January – December 2014. The main objective of the research was to understand the epidemiology of RTAs in order to develop preventive measures. A total of 1725cases from road RTAs data were extracted from the directorate of traffic police Central Equatoria state Juba and Juba teaching hospital. Results: Most (99.5% of the RTA drivers were not under the influence of alcohol. Most accidents were caused by male drivers (99%. The highest number of RTAs took place in August (11%. Drivers of private vehicles caused most accidents (37%. Most drivers (46% were aged 20-30 years. RTAs occurred most often on city roads (89.83%. Conclusion: This leads us to conclude that a comprehensive safety system is needed that are premised on the idea of community-based awareness of traffic rules and safety regulations. Resources are limited so there is a need to harness local resources including the local community. More efforts are needed to improve road safety education among the youth/integrate safety into road design.

Chernobylsk accident (Causes and Consequences)-Part 1

International Nuclear Information System (INIS)

Esteves, D.

1986-07-01

Facts, project data, hypothesis, calculations, evaluations, monitoring, standard requirements and several considerations, related to causes, effects and consequences of Chernobylsk-4 accident. (M.C.K.) [pt

Release fraction of PWR after severe accidents. Vol. 4

Energy Technology Data Exchange (ETDEWEB)

Aziz, M; El-Messeiry, A M [National Center for Nuclear Safety and Radiation Control, Atomic Energy Authority, Cairo (Egypt)

1996-03-01

Fission fragments and gases are emitted after accidents as a result of core meltdown and core concrete interactions. These aerosols are transported and fill the reactor containment. With increasing the pressure above pressure design bases, a failure of containment may occur and subsequently these aerosols will release into the external environment leading to a source term of radioactivity that affects the safety of workers and public. The amount of aerosol which escapes to the environment can be described by the release fraction which is defined as the total accumulated aerosol which initially enters the containment. The factors that affect the release fraction is studied, and the aerosol dynamics equation is used to model the release of aerosol to the outside atmosphere. These factors are containment pressure, failure time,break area, the size of aerosol particle. It found that early failure time and higher pressure increase the release fraction, also the release faction is affected by the area and the aerosol particle size. 7 figs., 2 tabs.

Release fraction of PWR after severe accidents. Vol. 4

International Nuclear Information System (INIS)

Aziz, M.; El-Messeiry, A.M.

1996-01-01

Fission fragments and gases are emitted after accidents as a result of core meltdown and core concrete interactions. These aerosols are transported and fill the reactor containment. With increasing the pressure above pressure design bases, a failure of containment may occur and subsequently these aerosols will release into the external environment leading to a source term of radioactivity that affects the safety of workers and public. The amount of aerosol which escapes to the environment can be described by the release fraction which is defined as the total accumulated aerosol which initially enters the containment. The factors that affect the release fraction is studied, and the aerosol dynamics equation is used to model the release of aerosol to the outside atmosphere. These factors are containment pressure, failure time,break area, the size of aerosol particle. It found that early failure time and higher pressure increase the release fraction, also the release faction is affected by the area and the aerosol particle size. 7 figs., 2 tabs

Noble gas control room accident filtration system for severe accident conditions N-CRAFT. System design

International Nuclear Information System (INIS)

Hill, Axel

2014-01-01

Severe accidents might cause the release of airborne radioactive substances to the environment of the NPP. This can either be due to leakages of the containment or due to a filtered containment venting in order to ensure the overall integrity of the containment. During the containment venting process aerosols and iodine can be retained by the FCVS which prevents long term ground contamination. Noble gases are not retainable by the FCVS. From this it follows that a large amount of radioactive noble gases (e.g. xenon, krypton) might be present in the nearby environment of the plant dominating the activity release, depending on the venting procedure and the weather conditions. Accident management measures are necessary in case of severe accidents and the prolonged stay of staff inside the main control room (MCR) or emergency response center (ERC) is essential. Therefore, the in leakage and contamination of the MRC and ERC with airborne activity has to be prevented. The radiation exposure of the crises team needs to be minimized. The entrance of noble gases cannot be sufficiently prevented by the conventional air filtration systems such as HEPA filters and iodine absorbers. With the objective to prevent an unacceptable contamination of the MCR/ERC atmosphere by noble gases AREVA GmbH has developed a noble gas retention system. The noble gas control room accident filtration system CRAFT is designed for this case and provides supply of fresh air to the MCR/ERC without time limitation. The retention process of the system is based on the dynamic adsorption of noble gases on activated carbon. The system consists of delay lines (carbon columns) which are operated by a continuous and simultaneous adsorption and desorption process. These cycles ensure a periodic load and flushing of the delay lines retaining the noble gases from entering the MCR. CRAFT allows a minimization of the dose rate inside MCR/ERC and ensures a low radiation exposure to the staff on shift maintaining

Prevention of the causes and consequences of a criticality accident - measures adopted in France; Prevention des causes et des consequences d'un accident de criticite - solutions adoptees en France

Energy Technology Data Exchange (ETDEWEB)

Fruchard, Y.; Lavie, J.M

1966-07-01

The question of safety in regard to criticality accident risks has two aspects: prevention of the cause and limitation of the consequences. These two aspects are closely connected. The effort devoted to prevention of the causes depends on the seriousness of the possible human psychologic and economic consequences of the accident. The criticality accidents which have occurred in the nuclear industry, though few in number, do reveal the imperfect nature of the techniques adopted to prevent the causes, and also constitute the only available realistic basis for evaluating the consequences and developing measures to limit them. The authors give a analysis of the known causes and consequences of past criticality accidents and on this basis make a number of comments concerning: the validity of traditional safety criteria, the probability of accidents for different types of operations, characteristic accidents which can serve as models, and the extent of possible radiological consequences. The measures adopted in France to limit the consequences of a possible criticality accident under the headings: location, design and lay-out of the installations, accident detection, and dosimetry for the exposed personnel, are briefly described after a short account of the criteria used in deciding on them. (author) [French] La surete relative aux risques d'accidents de criticite presente deux aspects: la prevention des causes et les parades aux consequences. Ces deux aspects sont tres lies. L'effort consenti a la prevention des causes decoule de l'importance des consequences humaines economiques et psychologiques possibles d'un eventuel accident. Les accidents de criticite survenus dans l'industrie nucleaire, malgre leur rarete, d'une part devoilent les imperfections des techniques de prevention des causes, d'autre part constituent la seule base realiste disponible d'evaluation des consequences et de mise au point des parades a ces consequences

Joint release rate estimation and measurement-by-measurement model correction for atmospheric radionuclide emission in nuclear accidents: An application to wind tunnel experiments.

Science.gov (United States)

Li, Xinpeng; Li, Hong; Liu, Yun; Xiong, Wei; Fang, Sheng

2018-03-05

The release rate of atmospheric radionuclide emissions is a critical factor in the emergency response to nuclear accidents. However, there are unavoidable biases in radionuclide transport models, leading to inaccurate estimates. In this study, a method that simultaneously corrects these biases and estimates the release rate is developed. Our approach provides a more complete measurement-by-measurement correction of the biases with a coefficient matrix that considers both deterministic and stochastic deviations. This matrix and the release rate are jointly solved by the alternating minimization algorithm. The proposed method is generic because it does not rely on specific features of transport models or scenarios. It is validated against wind tunnel experiments that simulate accidental releases in a heterogonous and densely built nuclear power plant site. The sensitivities to the position, number, and quality of measurements and extendibility of the method are also investigated. The results demonstrate that this method effectively corrects the model biases, and therefore outperforms Tikhonov's method in both release rate estimation and model prediction. The proposed approach is robust to uncertainties and extendible with various center estimators, thus providing a flexible framework for robust source inversion in real accidents, even if large uncertainties exist in multiple factors. Copyright © 2017 Elsevier B.V. All rights reserved.

Risk analysis of releases from accidents during mid-loop operation at Surry

International Nuclear Information System (INIS)

Jo, J.; Lin, C.C.; Nimnual, S.; Mubayi, V.; Neymotin, L.

1992-11-01

Studies and operating experience suggest that the risk of severe accidents during low power operation and/or shutdown (LP/S) conditions could be a significant fraction of the risk at full power operation. Two studies have begun at the Nuclear Regulatory Commission (NRC) to evaluate the severe accident progression from a risk perspective during these conditions: One at the Brookhaven National Laboratory for the Surry plant, a pressurized water reactor (PWR), and the other at the Sandia National Laboratories for the Grand Gulf plant, a boiling water reactor (BWR). Each of the studies consists of three linked, but distinct, components: a Level I probabilistic risk analysis (PRA) of the initiating events, systems analysis, and accident sequences leading to core damage; a Level 2/3 analysis of accident progression, fuel damage, releases, containment performance, source term and consequences-off-site and on-site; and a detailed Human Reliability Analysis (HRA) of actions relevant to plant conditions during LP/S operations. This paper summarizes the approach taken for the Level 2/3 analysis at Surry and provides preliminary results on the risk of releases and consequences for one plant operating state, mid-loop operation, during shutdown

Modeling and analyses of postulated UF6 release accidents in gaseous diffusion plant

International Nuclear Information System (INIS)

Kim, S.H.; Taleyarkhan, R.P.; Keith, K.D.; Schmidt, R.W.; Carter, J.C.; Dyer, R.H.

1995-10-01

Computer models have been developed to simulate the transient behavior of aerosols and vapors as a result of a postulated accident involving the release of uranium hexafluoride (UF 6 ) into the process building of a gaseous diffusion plant. UF 6 undergoes an exothermic chemical reaction with moisture (H 2 O) in the air to form hydrogen fluoride (HF) and radioactive uranyl fluoride (UO 2 F 2 ). As part of a facility-wide safety evaluation, this study evaluated source terms consisting of UO 2 F 2 as well as HF during a postulated UF 6 release accident in a process building. In the postulated accident scenario, ∼7900 kg (17,500 lb) of hot UF 6 vapor is released over a 5 min period from the process piping into the atmosphere of a large process building. UO 2 F 2 mainly remains as airborne-solid particles (aerosols), and HF is in a vapor form. Some UO 2 F 2 aerosols are removed from the air flow due to gravitational settling. The HF and the remaining UO 2 F 2 are mixed with air and exhausted through the building ventilation system. The MELCOR computer code was selected for simulating aerosols and vapor transport in the process building. MELCOR model was first used to develop a single volume representation of a process building and its results were compared with those from past lumped parameter models specifically developed for studying UF 6 release accidents. Preliminary results indicate that MELCOR predicted results (using a lumped formulation) are comparable with those from previously developed models

Minimization of the occupational doses during the liquidation of the radiation accident consequences

International Nuclear Information System (INIS)

Kuryndina, Lidia; Stroganov, Anatoly; Kuryndin, Anton

2008-01-01

Full text: As known the accident on the Chernobylskaya npp is the heaviest one in the nuclear energy history. It showed how considerable can be radiation levels on the breakdown nuclear facility. Nevertheless Russian specialists on radiation protection worked out and successfully realized a conception of the working in such conditions during the liquidation of the accident consequences. The conception based out on using ALARA principle, included the methods of radiation fields structure analysis and allowed to minimize of the occupational doses at operations of the accident consequences liquidation. The main idea of the conception is in strongly dependence between the radiation dose of the personnel performing the liquidation operations and concrete sequence of these operations. Also it is necessary from time to time to receive the experimental information about radiation situation dynamics on the breakdown facility and to make variant calculations for optimizing for the successful implementation of such approach. The structure of these calculations includes variable fraction for the actual state of the facility before the accident and after one and not variable fraction depend on the geometric and protection characteristics of the facility. And the second part is more complicated and bigger. Therefore the most part of these calculations required for the any successful liquidation of the accident consequences can be made on the facility projecting stage. If it will be made the following tasks can be solved in case of the accident: 1) To estimate a distribution of the contamination source using the radiation control system indications; 2) To determine a contribution from each source to the dose rate for any contaminated area; 3) To estimate the radiation doses of the personnel participated in the accident consequences liquidation; 4) To select and to realize the sequence of the liquidation operations giving the minimal doses. The paper will overview the description

Management, administrative and operational causes of the accident: Chernobyl nuclear power station

International Nuclear Information System (INIS)

Anastas, G.

1996-01-01

Full text: The Chernobyl accident, which occurred in April 1986, was the result of management, administrative, operational, technical and design flaws. The accident released millions of curies of mixed fission products (including 70-100 P Bq of 137 Cs). The results of this study strongly suggest that the cultural, political, managerial and operational attributes of the Soviet 'system' performed in a synergistic manner to significantly contribute to the initiation of the accident. At the time of the accident, science, engineering and safety in the former Soviet Union were dominated by an atmosphere of politics, group think and 'dingoes tending the sheep'

Estimate of radionuclide release characteristics into containment under severe accident conditions

International Nuclear Information System (INIS)

Nourbakhsh, H.P.

1993-11-01

A detailed review of the available light water reactor source term information is presented as a technical basis for development of updated source terms into the containment under severe accident conditions. Simplified estimates of radionuclide release and transport characteristics are specified for each unique combination of the reactor coolant and containment system combinations. A quantitative uncertainty analysis in the release to the containment using NUREG-1150 methodology is also presented

Massive radiological releases profoundly differ from controlled releases

International Nuclear Information System (INIS)

Pascucci-Cahen, Ludivine; Patrick, Momal

2012-11-01

Preparing for a nuclear accident implies understanding potential consequences. While many specialized experts have been working on different particular aspects, surprisingly little effort has been dedicated to establishing the big picture and providing a global and balanced image of all major consequences. IRSN has been working on the cost of nuclear accidents, an exercise which must strive to be as comprehensive as possible since any omission obviously underestimates the cost. It therefore provides (ideally) an estimate of all cost components, thus revealing the structure of accident costs, and hence sketching a global picture. On a French PWR, it appears that controlled releases would cause an 'economical' accident with limited radiological consequences when compared to other costs; in contrast, massive releases would trigger a major crisis with strong radiological consequences. The two types of crises would confront managers with different types of challenges. (authors)

Identification and assessment of containment and release management strategies

International Nuclear Information System (INIS)

Lehner, J.R.; Lin, C.C.; Neogy, P.

1990-01-01

Brookhaven National Laboratory, under the auspices of the US Nuclear Regulatory Commission, is investigating accident management strategies which could help preserve containment integrity or minimize releases during a severe accident. The objective is to make use of existing plant systems and equipment in innovative ways to reduce the likelihood of containment failure or to mitigate the release of fission products to the environment if failure cannot be prevented. Many of the strategies would be implemented during the later stages of a severe accident. The identification and assessment process for containment and release strategies is described, and some insights derived from its application to a BWR Mark 1 plant are presented here. 13 refs., 2 figs

Management, administrative and operational causes of the accident: Chernobyl nuclear power station

International Nuclear Information System (INIS)

Anastas, G.

1996-01-01

The Chernobyl accident, which occurred in April 1986, was the result of management, administrative, operational, technical and design flaws. The accident released millions of curies of mixed fission products including 70-100 PBq of 137 Cs. At the time of the accident, science, engineering and safety in the former Soviet Union were dominated by an atmosphere of politics, group think and 'dingoes tending the sheep'. This corrupted safety culture exacerbated the poor design of the reactor. The results of this study strongly suggest that the cultural, political, managerial and operational attributes of the Soviet 'system' performed in a synergistic manner to significantly contribute to the initiation of the accident. (authors)

The environmental impact of radioactive releases from accidents in nuclear power reactors

International Nuclear Information System (INIS)

Beattie, J.R.; Griffiths, R.F.; Kaiser, G.D.; Kinchin, G.H.

1978-01-01

A survey of accidental releases of radioactivity from thermal and fast reactors is presented. Following a general discussion on the hazards involved, the nature of the environmental impact of radioactive releases is examined. This includes a brief review of the natural radiation background, the effect on human health of various levels of radiation and radioactivity, permissible and reference levels, and the type of hazards from both passing clouds of airbourne radioactive material and from ground deposited material. The problem of atmospheric dispersion and methods of calculations of radioactive materials in the atmosphere are examined in order for the consequences of accidental release to be analysed. National accidents and their environmental consequences are then examined. Finally there is a review of the risks to which man is always exposed because of his environment. Common and collective risks are also considered. Conclusions are reached as to the acceptibility or otherwise of the environmental impact of reactor accidents. (U.K.)

Chernobyl accident: Causes, consequences and problems of radiation measurements

International Nuclear Information System (INIS)

Kortov, V.; Ustyantsev, Yu.

2013-01-01

General description of Chernobyl accident is given in the review. The accident causes are briefly described. Special attention is paid to radiation situation after the accident and radiation measurements problems. Some data on Chernobyl disaster are compared with the corresponding data on Fukushima accident. It is noted that Chernobyl and Fukushima lessons should be taken into account while developing further measures on raising nuclear industry safety. -- Highlights: ► The short comparative analysis of accidents at Chernobyl and Fukushima is given. ► We note the great effect of β-radiation on the radiation situation at Chernobyl. ► We discuss the problems of radiation measurements under these conditions. ► The impact of shelter on the radiation situation near Chernobyl NPS is described

Investigate the causes of transport and tramming accidents on coal mines.

CSIR Research Space (South Africa)

Rushworth, AM

1999-03-01

Full Text Available Transport and tramming accidents on coal mines in South Africa are a major component in the overall pattern of colliery accidents. Furthermore, there is now a widespread acceptance that human error is a common cause of failure in accident patterns...

Benchmarking of fast-running software tools used to model releases during nuclear accidents

Energy Technology Data Exchange (ETDEWEB)

Devitt, P.; Viktorov, A., E-mail: Peter.Devitt@cnsc-ccsn.gc.ca, E-mail: Alex.Viktorov@cnsc-ccsn.gc.ca [Canadian Nuclear Safety Commission, Ottawa, ON (Canada)

2015-07-01

Fukushima highlighted the importance of effective nuclear accident response. However, its complexity greatly impacted the ability to provide timely and accurate information to national and international stakeholders. Safety recommendations provided by different national and international organizations varied notably. Such differences can partially be attributed to different methods used in the initial assessment of accident progression and the amount of radioactivity release.Therefore, a comparison of methodologies was undertaken by the NEA/CSNI and its highlights are presented here. For this project, the prediction tools used by various emergency response organizations for estimating the source terms and public doses were examined. Those organizations that have a capability to use such tools responded to a questionnaire describing each code's capabilities and main algorithms. Then the project's participants analyzed five accident scenarios to predict the source term, dispersion of releases and public doses. (author)

Comparison of US/FRG accident condition models for HTGR fuel failure and radionuclide release

International Nuclear Information System (INIS)

Verfondern, K.

1991-03-01

The objective was to compare calculation models used in safety analyses in the US and FRG which describe fission product release behavior from TRISO coated fuel particles under core heatup accident conditions. The frist step performed is the qualitative comparison of both sides' fuel failure and release models in order to identify differences and similarities in modeling assumptions and inputs. Assumptions of possible particle failure mechanisms under accident conditions (SiC degradation, pressure vessel) are principally the same on both sides though they are used in different modeling approaches. The characterization of a standard (= intact) coated particle to be of non-releasing (GA) or possibly releasing (KFA/ISF) type is one of the major qualitative differences. Similar models are used regarding radionuclide release from exposed particle kernels. In a second step, a quantitative comparison of the calculation models was made by assessing a benchmark problem predicting particle failure and radionuclide release under MHTGR conduction cooldown accident conditions. Calculations with each side's reference method have come to almost the same failure fractions after 250 hours for the core region with maximum core heatup temperature despite the different modeling approaches of SORS and PANAMA-I. The comparison of the results of particle failure obtained with the Integrated Failure and Release Model for Standard Particles and its revision provides a 'verification' of these models in this sense that the codes (SORS and PANAMA-II, and -III, respectively) which were independently developed lead to very good agreement in the predictions. (orig./HP) [de

A review of accidents, prevention and mitigation options related to hazardous gases

International Nuclear Information System (INIS)

Fthenakis, V.M.

1993-05-01

Statistics on industrial accidents are incomplete due to lack of specific criteria on what constitutes a release or accident. In this country, most major industrial accidents were related to explosions and fires of flammable materials, not to releases of chemicals into the environment. The EPA in a study of 6,928 accidental releases of toxic chemicals revealed that accidents at stationary facilities accounted for 75% of the total number of releases, and transportation accidents for the other 25%. About 7% of all reported accidents (468 cases) resulted in 138 deaths and 4,717 injuries ranging from temporary respiratory problems to critical injuries. In-plant accidents accounted for 65% of the casualties. The most efficient strategy to reduce hazards is to choose technologies which do not require the use of large quantities of hazardous gases. For new technologies this approach can be implemented early in development, before large financial resources and efforts are committed to specific options. Once specific materials and options have been selected, strategies to prevent accident initiating events need to be evaluated and implemented. The next step is to implement safety options which suppress a hazard when an accident initiating event occurs. Releases can be prevented or reduced with fail-safe equipment and valves, adequate warning systems and controls to reduce and interrupt gas leakage. If an accident occurs and safety systems fail to contain a hazardous gas release, then engineering control systems will be relied on to reduce/minimize environmental releases. As a final defensive barrier, the prevention of human exposure is needed if a hazardous gas is released, in spite of previous strategies. Prevention of consequences forms the final defensive barrier. Medical facilities close by that can accommodate victims of the worst accident can reduce the consequences of personnel exposure to hazardous gases

Radionuclide release calculations for selected severe accident scenarios

International Nuclear Information System (INIS)

Denning, R.S.; Leonard, M.T.; Cybulskis, P.; Lee, K.W.; Kelly, R.F.; Jordan, H.; Schumacher, P.M.; Curtis, L.A.

1990-08-01

This report provides the results of source term calculations that were performed in support of the NUREG-1150 study. ''Severe Accident Risks: An Assessment for Five US Nuclear Power Plants.'' This is the sixth volume of a series of reports. It supplements results presented in the earlier volumes. Analyses were performed for three of the NUREG-1150 plants: Peach Bottom, a Mark I, boiling water reactor; Surry, a subatmospheric containment, pressurized water reactor; and Sequoyah, an ice condenser containment, pressurized water reactor. Complete source term results are presented for the following sequences: short term station blackout with failure of the ADS system in the Peach Bottom plant; station blackout with a pump seal LOCA for the Surry plant; station blackout with a pump seal LOCA in the Sequoyah plant; and a very small break with loss of ECC and spray recirculation in the Sequoyah plant. In addition, some partial analyses were performed which did not require running all of the modules of the Source Term Code Package. A series of MARCH3 analyses were performed for the Surry and Sequoyah plants to evaluate the effects of alternative emergency operating procedures involving primary and secondary depressurization on the progress of the accident. Only thermal-hydraulic results are provided for these analyses. In addition, three accident sequences were analyzed for the Surry plant for accident-induced failure of steam generator tubes. In these analyses, only the transport of radionuclides within the primary system and failed steam generator were examined. The release of radionuclides to the environment is presented for the phase of the accident preceding vessel meltthrough. 17 refs., 176 figs., 113 tabs

Causes of several accidents in gamma radiography testing units

International Nuclear Information System (INIS)

Vykrocil, L.

1979-01-01

Three cases are described of radiation accidents in gamma flaw-detection work-places in the West Bohemian Region. The causes of the accidents stemmed from the unsatisfactory technical condition of the materials testing equipment used and nonobservance of regulations for work with radioactive sourr.es. It is necessary for precluding similar accident to improve preventive care of gamma flaw-detection equipment and to educate personnel who would be considered for coping with the situation when control over the radiation source is lost. (Ha)

The causes and prevalence of road traffic accidents amongst ...

African Journals Online (AJOL)

The study showed a prevalence of road traffic accidents of 47.9% in Benin City occurring more in day time and the common causes of road traffic accidents include careless driving, speed violation, brake failure, traffic violations, faulty overtaking, burst tyre, bad roads, alcohol use and armed robbery attack. Thus measures ...

A review of criticality accidents

International Nuclear Information System (INIS)

Stratton, W.R.; Smith, D.R.

1989-03-01

Criticality accidents and the characteristics of prompt power excursions are discussed. Forty-one accidental power transients are reviewed. In each case where available, enough detail is given to help visualize the physical situation, the cause or causes of the accident, the history and characteristics of the transient, the energy release, and the consequences, if any, to personnel and property. Excursions associated with large power reactors are not included in this study, except that some information on the major accident at the Chernobyl reactor in April 1986 is provided in the Appendix. 67 refs., 21 figs., 2 tabs

Release of radionuclides following severe accident in interim storage facility. Source term determination

International Nuclear Information System (INIS)

Morandi, S.; Mariani, M.; Giacobbo, F.; Covini, R.

2006-01-01

Among the severe accidents that can cause the release of radionuclides from an interim storage facility, with a consequent relevant radiological impact on the population, there is the impact of an aircraft on the facility. In this work, a safety assessment analysis for the case of an aircraft crash into an interim storage facility is tackled. To this aim a methodology, based upon DOE, IAEA and NUREG standard procedures and upon conservative yet realistic hypothesis, has been developed in order to evaluate the total radioactivity, source term, released to the biosphere in consequence of the impact, without recurring to the use of complicated numerical codes. The procedure consists in the identification of the accidental scenarios, in the evaluation of the consequent damage to the building structures and to the waste packages and in the determination of the total release of radionuclides through the building-atmosphere interface. The methodology here developed has been applied to the case of an aircraft crash into an interim storage facility currently under design. Results show that in case of perforation followed by a fire incident the total released activity would be greater of some orders of magnitude with respect to the case of mere perforation. (author)

Causes of road traffic accidents in Juba

African Journals Online (AJOL)

2017-05-02

May 2, 2017 ... Introduction: Road traffic accidents (RTAs) are a major cause of death and disability in ... death in many parts of the world resulting in economic ... The long civil war ... the second highest number compared to private cars. In.

Proposal of the concept of selection of accidents that release large amounts of radioactive substances in the high temperature engineering test reactor

International Nuclear Information System (INIS)

Ono, Masato; Honda, Yuki; Takada, Shoji; Sawa, Kazuhiro

2015-01-01

In Position, construction and equipment of testing and research reactor to be subjected to the use standards for rules Article 53 (prevention of expansion of the accident to release a large amount of radioactive material) generation the frequency is a lower accident than design basis accident, when what is likely to release a large amount of radioactive material or radiation from the facility has occurred, and take the necessary measures in order to prevent the spread of the accident. There is provided a lower accident than frequency design basis accidents, for those that may release a large amount of radioactive material or radiation. (author)

Transport and release of fission products during nuclear reactor accident

International Nuclear Information System (INIS)

Lee, K.W.; Kuhlman, M.R.; Gieseke, J.A.

1984-01-01

This study represents the identification and formulation of a systematic, mechanistic approach to estimating source terms and the implementation of this approach through calculations of fission products release to the environment for a large PWR reactor under a selected set of accident conditions. The development and improvement of calculational procedures is an evolutionary process and in the long term must be verified through experimental studies. It is anticipated that as additional information is obtained the accuracy of predictions can be improved and uncertainties reduced. Transport and deposition of radionuclides were found to be quite dependent on the accident sequences and the corresponding thremal hydraulic conditions. Reduced temperatures led to increased deposition of vapor species, and reduced flow rates to increased aerosol deposition. It is to be recognized that the estimates of release fractions are subject to uncertainties in the data and computer models employed in the calculations and are expected to have been influenced by assumptions regarding plant geometry, thermal hydraulics, deposition mechanisms, and sequence events. The effects of these assumptions will be investigated as this study continues. (Author)

An assessment on the environmental contamination caused by the Fukushima accident.

Science.gov (United States)

Song, Jin Ho

2018-01-15

The radiological releases from the damaged fuel to the atmosphere and into the cooling water in the Fukushima Daiich Nuclear Power Plant (FDNPP) accident are investigated. Atmospheric releases to the land and ocean mostly occurred during the first week after the accident whereas continuous release from the damaged fuel into the cooling water resulted in an accumulation of contaminated water in the plant during last six years. An evaluation of measurement data and analytical model for the release of radionuclides indicated that atmospheric releases were mainly governed by the volatility of the radionuclides. Using the measurement data on the contaminated water, the mechanism for the release of long-lived radionuclides into the cooling water was analyzed. It was found that the radioactivity concentrations of 90 Sr in the contaminated water in the Primary Containment Vessel (PCV) of unit 2 and unit 3 were consistently higher than that of 137 Cs and the radioactivity concentration of 90 Sr in the turbine building of unit 1 in year 2015 was higher than that in year 2011. It was also observed that the radioactivity concentration of long-lived radionuclides in the contaminated water in the FDNPP is still high even in year 2015. The activity ratio of 238 Pu/ 239+240 Pu for the contaminated water was in the range of 1.7-5.4, which was significantly different from the ratios from the soil samples representing the atmospheric releases of FDNPP. It is concluded that the release mechanisms into the atmosphere and cooling water are clearly different and there has been significant amount of long-lived radionuclides released into the contaminated water. Copyright © 2017 Elsevier Ltd. All rights reserved.

Severe accident progression perspectives for Mark I containments based on the IPE results

International Nuclear Information System (INIS)

Lin, C.C.; Lehner, J.R.; Pratt, W.T.; Drouin, M.

1995-01-01

Based on level 2 analyses in IPE (Individual Plant Examination) submittals accident progression, perspectives were obtained for all containment types. These perspectives consisted of insights on containment failure modes, releases therein, and factors responsible for the results. To illustrate the types of perspectives acquired on severe accident progresssion, insights obtained for (BWR) Mark I containments are discussed here. Mark I containments have high strength but small volumes and rely on pressure suppression pools to condense steam released from the reactor coolant system during an accident. Accidents causing structural failure of the drywell shortly after the core debris melts through the reactor vessel were found to be dominant contributors to risk. Importance of individual containment failure mechanisms depends on plant features and in some cases on modeling assumptions; however the following mechanisms were found important: drywell shell melt-through caused by direct contact with core debris and drywell failure caused by rapid pressure/temperature pulses at time of vessel melt-through. Drywell failure caused by gradual pressure/temperature buildup due to gases and steam released during core/concrete interactions is important in some IPEs. In other IPEs vent was an important contributor. However, accidents that bypass containment (eg interfacing systems LOCA)or involve containment isolation failure were not important contributors to the CDF in any of the IPEs for Mark I plants. These accidents are also not important to risk (even though they can involve large fission product release) because their frequencies of occurrence are so much lower than frequencies of early structural failure caused by other accidents that dominate the CDF

On the main causes and circumstances of the Chernobyl accident

International Nuclear Information System (INIS)

Shteinberg, N.

1992-01-01

The main causes are described of the Chernobyl accident, the discussion of which seems to be finished. It is shown that important actual parameters of the reactor differed adversely from the project; this fact had not been taken into account in operational instructions and therefore it could not be known to the operators. Further, the general causes of the Chernobyl accident are pointed out. A major cause is the still non-existing fundamental law and, consequently, lack of definition of responsibilities (it will, above all, be necessary to set out indivisible responsibility of the plant operator for nuclear safety). At present all participants in nuclear power engineering share responsibility. Another cause of the accident can be seen in insufficient quality assurance resulting from the fact that the Soviet regulatory body has not all the necessary powers and the independence. Closely connected with this is the fact that the role of the human factor is overemphasized and operational experience is not included in design modifications. In general, insufficient safety culture as defined by INSAG can be stated. 6 figs., 4 refs

Prevention of the Causes and Consequences of Criticality Accidents: Measures Adopted in France; Prevention des Causes et des Consequences d'un Accident de Criticite: Solutions Adoptees en France

Energy Technology Data Exchange (ETDEWEB)

Fruchard, Y.; Lavie, J. -M. [Commissariat a l' Energie Atomique, Paris (France)

1966-05-15

It is important to guard against the risk of criticality accidents by seeking to prevent their occurrence through the elimination of their causes and also by taking steps to provide against their consequences. These two aspects are closely linked since the efforts made to elaborate preventive procedures are dictated by the importance of the repercussions which such accidents are liable to have in the human, economic and psychological spheres. The criticality accidents which have occurred in the nuclear industry, though small in number, do reveal the imperfect nature of the techniques adopted to prevent them, and they constitute the only available realistic basis for evaluating their consequences and developing suitable precautionary techniques. The authors give a detailed analysis of the known causes and consequences of past criticality accidents and on this basis make a number of comments in connection with the validity of traditional safety criteria, the probability of accidents for different types of operation, the characteristic accidents capable of serving as models, and the extent of possible radiological consequences. The measures adopted in France to limit the consequences of a possible criticality accident (location, design and lay-out of installations, accident detection dosimetry for exposed personnel) are briefly described after a short account of the criteria used in deciding on them. Finally, the authors discuss the economic implications of adopting particular precautionary measures and of applying them uniformly, taking due account of the question of reliability. (author) [French] II est important de se proteger contre les risques d'accidents de criticite en tentant, d'une part, de prevenir les accidents eux-memes par l'elimination de leurs causes, d'autre part, de parer a leurs consequences. Ces deux aspects sont tres lies: l'effort portant sur la prevention des accidents decoule de l'importance de leurs consequences sur les plans humain, economique

Types and severity of operated supraclavicular brachial plexus injuries caused by traffic accidents.

Science.gov (United States)

Kaiser, Radek; Waldauf, Petr; Haninec, Pavel

2012-07-01

Brachial plexus injuries occur in up to 5% of polytrauma cases involving motorcycle accidents and in approximately 4% of severe winter sports injuries. One of the criteria for a successful operative therapy is the type of lesion. Upper plexus palsy has the best prognosis, whereas lower plexus palsy is surgically untreatable. The aim of this study was to evaluate a group of patients with brachial plexus injury caused by traffic accidents, categorize the injuries according to type of accident, and look for correlations between type of palsy (injury) and specific accidents. A total of 441 brachial plexus reconstruction patients from our department were evaluated retrospectively(1993 to 2011). Sex, age, neurological status, and the type and cause of injury were recorded for each case. Patients with BPI caused by a traffic accident were assessed in detail. Traffic accidents were the cause of brachial plexus injury in most cases (80.7%). The most common type of injury was avulsion of upper root(s) (45.7%) followed by rupture (28.2%), complete avulsion (16.9%) and avulsion of lower root(s) (9.2%). Of the patients, 73.9% had an upper,22.7% had a complete and only 3.4% had a lower brachial plexus palsy. The main cause was motorcycle accidents(63.2%) followed by car accidents (23.5%), bicycle accidents(10.7%) and pedestrian collisions (3.1%) (paccidents had a higher percentage of lower avulsion (22.7%) and a lower percentage of upper avulsion (29.3%), whereas cyclists had a higher percentage of upper avulsion (68.6%) based on the data from the entire group of patients (paccidents (9.3%,paccidents),significantly more upper and fewer lower palsies were present. In the bicycle accident group, upper palsy was the most common (89%). Study results indicate that the most common injury was an upper plexus palsy. It was characteristic of bicycle accidents, and significantly more common in car and motorcycle accidents. The results also indicate that it is important to consider the

Patients' Risk of Causing Traffic Violations and Traffic Accidents while Driving.

Science.gov (United States)

Šestan, Nevenka; Dodič Fikfak, Metoda; Balantič, Zvone

2017-09-01

This study examines whether drivers suffering from epilepsy, chronic alcoholism and/or hazardous drinking, psychoactive substance abuse, other diseases of the nervous system, mental and behavioural disorders, cardiovascular diseases, severe diabetes, and severe eye diseases are at a greater risk of causing traffic accidents and traffic violations than drivers that cause accidents and violations without these diagnoses. A case control study was carried out. The cases were drivers checked by a special medical committee in the period observed suffering from the diseases listed above. Matched controls were taken from the cohort of those that caused accidents and violations during the same period observed. The descriptive statistics were followed by calculation of correlations, t-tests and χ 2 , and the odds ratio. Drivers with referrals for diseases of the nervous system are five times more likely to cause a traffic accident compared to controls (OR=5.18; 95% CI=2.59-10.34); in addition, a high risk is associated with drivers with mental and behavioural disorders (OR=3.64; 95% CI=1.91-6.94), drivers with epilepsy (OR=1.99; 95% CI=1.01-3.92), and drivers addicted to alcohol (OR=1.71; 95% CI=1.01-2.89). Drivers suffering from addiction, a disease of the nervous system, or epilepsy are more likely to cause a traffic accident, which is a contribution to the inconclusive findings of previous studies. The multiple reasons for risks of patients suffering from mental and behavioural disorders need to be further investigated. Copyright© by the National Institute of Public Health, Prague 2017

Atmospheric Release Advisory capability (ARAC) response to the Three Mile Island accident

International Nuclear Information System (INIS)

Dickerson, M.H.; Gudiksen, P.H.

1979-10-01

This paper discusses the three general classes of support provided by the Atmospheric Release Advisory Capability (ARAC) and describes the role played by ARAC in support of DOE during the Three Mile Island accident in March and April of 1979

Construction accidents: identification of the main associations between causes, mechanisms and stages of the construction process.

Science.gov (United States)

Carrillo-Castrillo, Jesús A; Trillo-Cabello, Antonio F; Rubio-Romero, Juan C

2017-06-01

To identify the most frequent causes of accidents in the construction sector in order to help safety practitioners in the task of prioritizing preventive actions depending on the stage of construction. Official accident investigation reports are analysed. A causation pattern is identified with the proportion of causes in each of the different possible groups of causes. Significant associations of the types of causes with accident mechanisms and construction stages have been identified. Significant differences have been found in accident causation depending on the mechanism of the accident and the construction stage ongoing. These results should be used to prioritize preventive actions to combat the most likely causes for each accident mechanism and construction stage.

Portable Filtered Air Suction System for Released Radioactive Gases Prevention under a Severe Accident of NPPs

International Nuclear Information System (INIS)

Gu, Beom W.; Choi, Su Y.; Rim, Chun T.

2013-01-01

In this paper, the portable filtered air suction system (PoFASS) for released radioactive gases prevention under a severe accident of NPP is proposed. This technology can prevent the release of the radioactive gases to the atmosphere and it can be more economical than FVCS because PoFASS can cover many NPPs with its high mobility. The conceptual design of PoFASS, which has the highest cost effectiveness and robustness to the environment condition such as wind velocity and precipitation, is suggested and the related previous research is introduced in this paper. The portable filtered air suction system (PoFASS) for released radioactive gases prevention can play a key role to mitigate the severe accident of NPP with its high cost effectiveness and robustness to the environment conditions. As further works, the detail design of PoFASS to fabricate a prototype for a demonstration will be proceeded. When released radioactive gases from the broken containment building in the severe accident of nuclear power plants (NPPs) such as the Chernobyl and Fukushima accidents occur, there are no ways to prevent the released radioactive gases spreading in the air. In order to solve this problem, several European NPPs have adopted the filtered vented containment system (FVCS), which can avoid the containment failure through a pressure relief capability to protect the containment building against overpressure. However, the installation cost of FVCS for a NPP is more than $10 million and this system has not been widely welcomed by NPP operating companies due to its high cost

Containment and release management applied to a PWR ice condenser plant

International Nuclear Information System (INIS)

Lehner, J.; Neogy, P.

1991-01-01

As part of a US Nuclear Regulatory Commission program focusing on the accident management capabilities of operating nuclear plants, Brookhaven National Laboratory (BNL) is carrying out a series of studies of containment and release management (CRM) for each of the five containment types used in US commercial power plants. The purpose of CRM is to maintain the integrity of the containment as long as possible following a severe accident and minimize the release of radioactivity to the environment

Radionuclide release calculations for selected severe accident scenarios. PWR, ice condenser design

Energy Technology Data Exchange (ETDEWEB)

Denning, R S; Gieseke, J A; Cybulskis, P; Lee, K W; Jordan, H; Curtis, L A; Kelly, R F; Kogan, V; Schumacher, P M

1986-07-01

This report presents results of analyses of the environmental releases of fission products (source terms) for severe accident scenarios in a pressurized water reactor with an ice-condenser containment. The analyses were performed to support the Severe Accident Risk Reduction/Risk Rebaselining Program (SARRP) which is being undertaken for the U.S. Nuclear Regulatory Commission by Sandia National Laboratories. In the SARRP program, risk estimates are being generated for a number of reference plant designs. The Sequoyah Plant has been used in this study as an example of a PWR ice-condenser plant. (author)

Prevention of the causes and consequences of a criticality accident - measures adopted in France

International Nuclear Information System (INIS)

Fruchard, Y.; Lavie, J.M.

1966-01-01

The question of safety in regard to criticality accident risks has two aspects: prevention of the cause and limitation of the consequences. These two aspects are closely connected. The effort devoted to prevention of the causes depends on the seriousness of the possible human psychologic and economic consequences of the accident. The criticality accidents which have occurred in the nuclear industry, though few in number, do reveal the imperfect nature of the techniques adopted to prevent the causes, and also constitute the only available realistic basis for evaluating the consequences and developing measures to limit them. The authors give a analysis of the known causes and consequences of past criticality accidents and on this basis make a number of comments concerning: the validity of traditional safety criteria, the probability of accidents for different types of operations, characteristic accidents which can serve as models, and the extent of possible radiological consequences. The measures adopted in France to limit the consequences of a possible criticality accident under the headings: location, design and lay-out of the installations, accident detection, and dosimetry for the exposed personnel, are briefly described after a short account of the criteria used in deciding on them. (author) [fr

Fission product releases at severe LWR accident conditions: ORNL/CEA measurements versus calculations

Energy Technology Data Exchange (ETDEWEB)

Andre, B.; Ducros, G.; Leveque, J.P. [CEA Centre d`Etudes de Grenoble, 38 (France). Dept. de Thermohydraulique et de Physique; Osborne, M.F.; Lorenz, R.A. [Oak Ridge National Lab., TN (United States); Maro, D. [CEA Centre d`Etudes de Fontenay-aux-Roses, 92 (France). Dept. de Protection de l`Environnement et des Installations

1995-12-31

Experimental programs in the United States and France have followed similar paths in supplying much of the data needed to analyze severe accidents. Both the HI/VI program, conducted at the Oak Ridge National Laboratory (ORNL) under the sponsorship of the U. S. Nuclear Regulatory Commission (NRC), and the HEVA/VERCORS program, supported by IPSN-Commissariat a l`Energie Atomique (CEA) and carried out at the Centre d`Etudes Nucleaires de Grenoble, have studied fission product release from light water reactor (LWR) fuel samples during test sequences representative of severe accidents. Recognizing that more accurate data, i.e., a better defined source term, could reduce the safety margins included in the rather conservative source terms originating from WASH-1400, the primary objective of these programs has been to improve the data base concerning fission product release and behavior at high temperatures. To facilitate the comparison, a model based on fission product diffusion mechanisms that was developed at ORNL and adapted with CEA experimental data is proposed. This CEA model is compared with the ORNL experimental data in a blind test. The two experimental programs used similar techniques in out-of-pile studies. Highly irradiated fuel samples were heated in radiofrequency induction furnaces to very high temperatures (up to 2700 K at ORNL and 2750 K at CEA) in oxidizing (H{sub 2}O), reducing (H{sub 2}) or mixed (H{sub 2}O+H{sub 2}) environments. The experimental parameters, which were chosen from calculated accident scenarios, did not duplicate specific accidents, but rather emphasized careful control of test conditions to facilitate extrapolation of the results to a wide variety of accident situations. This paper presents a broad and consistent database from ORNL and CEA release results obtained independently since the early 1980`S. A comparison of CORSOR and CORSOR Booth calculations, currently used in safety analysis, and the experimental results is presented and

Risky driving and the perception of motorcycle accident causes among Chinese motorcyclists in Hong Kong.

Science.gov (United States)

Cheng, Andy S K; Ng, Terry C K

2012-09-01

The primary purposes of this study were to explore the relationship between risk-taking acts while driving motorcycles and perceived causes of motorcycle accidents, as well as their contribution to active involvement in traffic accidents among Chinese motorcyclists in Hong Kong. Active involvement means the riders was likely at fault for the crash. A total of 774 motorcyclists were recruited, of whom 292 had been involved in active motorcycle accident in the previous 3 years. All were asked to fill in a questionnaire, which was developed to assess their risk-taking acts while driving a motorcycle and perception of motorcycle accident causes. The results of the study revealed 3 dimensions of accident causes, namely, driving-related, environment-related, and belief-related causes. These motorcycle accident causes were correlated with risk-taking acts while driving a motorcycle. A multivariate logistic regression analysis showed that risk-taking acts while driving motorcycles (adjusted odds ratio [OR]: 1.036, 95% confidence interval [CI]: 1.020-1.052), perception of driving-related cause (adjusted OR: 0.941, 95% CI: 0.916-0.967), and belief-related cause (adjusted OR: 1.134, 95% CI: 1.088-1.182) were significant factors contributing to involvement in active traffic accidents by motorcycle riders after controlling for concurrent demographic variables. The study highlights that perceived causes of motorcycle accidents are multidimensional, including those areas related to driving, the environment, and beliefs. It substantiates previous studies that a higher degree of driving-related risk perception is related to a lower degree of risk-taking acts while driving. Further research is needed to understand why belief-related causes, sometimes called superstitions, lead riders to believe that it is beyond their ability to affect accident causation and prevention.

Atmospheric Release Advisory Capability (ARAC) response to the Three Mile Island accident

International Nuclear Information System (INIS)

Dickerson, M.H.; Gudiksen, P.H.

1980-01-01

A discussion is presented of the three general classes of support provided by the Atmospheric Release Advisory Capability (ARAC) and describes the role played by ARAC in support of DOE during the Three Mile Island accident in March and April of 1979. 6 refs

Linear free energy correlations for fission product release from the Fukushima-Daiichi nuclear accident.

Science.gov (United States)

Abrecht, David G; Schwantes, Jon M

2015-03-03

This paper extends the preliminary linear free energy correlations for radionuclide release performed by Schwantes et al., following the Fukushima-Daiichi Nuclear Power Plant accident. Through evaluations of the molar fractionations of radionuclides deposited in the soil relative to modeled radionuclide inventories, we confirm the initial source of the radionuclides to the environment to be from active reactors rather than the spent fuel pool. Linear correlations of the form In χ = −α ((ΔGrxn°(TC))/(RTC)) + β were obtained between the deposited concentrations, and the reduction potentials of the fission product oxide species using multiple reduction schemes to calculate ΔG°rxn (TC). These models allowed an estimate of the upper bound for the reactor temperatures of TC between 2015 and 2060 K, providing insight into the limiting factors to vaporization and release of fission products during the reactor accident. Estimates of the release of medium-lived fission products 90Sr, 121mSn, 147Pm, 144Ce, 152Eu, 154Eu, 155Eu, and 151Sm through atmospheric venting during the first month following the accident were obtained, indicating that large quantities of 90Sr and radioactive lanthanides were likely to remain in the damaged reactor cores.

Tellurium release and deposition during the TMI-2 accident

International Nuclear Information System (INIS)

Vinjamuri, K.; Osetek, D.J.; Hobbins, R.R.; Jessup, J.S.

1984-09-01

The estimated behavior of tellurium during and after the accident at the Three Mile Island Unit-2 is presented. The behavior is based on all available measurement data for /sup 129m/Te, 132 Te, stable tellurium ( 126 Te, 128 Te and 130 Te), and best estimate calculations of tellurium release and transport. The predicted release was calculated using current techniques that relate release rate to fuel temperature and holdup of tellurium in zircaloy until significant oxidation occurs. The calculated release fraction was low, approx. 7%, but the total measured release for samples analyzed to date is about 5.8%. Of the measured tellurium about 2.4, 1.8, 0.88, 0.42, 0.17 and 0.086% of core inventory were in the containment sump water, upper plenum assembly surfaces, containment solids in the sump water, makeup and purification demineralizer, containment inside surface, and the reactor primary coolant, respectively. A significant fraction (54%) of the tellurium calculated to be retained on the upper plenum surfaces (4.61% of the core inventory) was deposited during the high pressure injection of coolant at about 200 min after the reactor scram. Comparison of tellurium behavior with in-pile and out-of-pile tests strongly suggests that zircaloy holds tellurium until significant cladding oxidation occurs

On the sequence and consequences of the Chernobyl reactor accident

Energy Technology Data Exchange (ETDEWEB)

Hennies, H H

1986-01-01

A serious reactor accident occurred on April 26, 1986 at Chernobyl near Kiev (Soviet Union) where, after melting of the core, there was a considerable release of radioactivity to the environment and to the atmosphere. The radioactivity release caused irradiation of the operating staff, which led to 24 deaths by June 1986. Hardly anything is known about the irradiation of the environment of the reactor plant, but the population within a radius of 30 km was evacuated. The radioactivity released into the atmosphere spread all over Europe, and Germany was affected a few days after the accident. The article gives a short description of the plant which suffered the accident, one tries to describe the course of the accident and to discuss the applicability to German plants.

Characteristics of injuries caused by paragliding accidents: A cross-sectional study.

Science.gov (United States)

Canbek, Umut; İmerci, Ahmet; Akgün, Ulaş; Yeşil, Murat; Aydin, Ali; Balci, Yasemin

2015-01-01

This study was undertaken to analyze the characteristics and risk factors relating to fatalities and injuries caused by paragliding. The judicial examination reports and hospital documents of 82 patients traumatized in 64 accidents during 242 355 paragliding jumps between August 2004 and September 2011 were analyzed. In these accidents, 18 of the 82 patients lost their lives. In the patients with a confirmed cause of accident, most of them were involved with multiple fractures and internal organ injuries (n=8, 44.4%). We investigated the incidence of paragliding injuries, the types of the injuries, and the severity of affected anatomical regions. The findings are significant for the prevention of paragliding injuries and future research.

Nuclear Reactor RA Safety Report, Vol. 16, Maximum hypothetical accident

International Nuclear Information System (INIS)

1986-11-01

Fault tree analysis of the maximum hypothetical accident covers the basic elements: accident initiation, phase development phases - scheme of possible accident flow. Cause of the accident initiation is the break of primary cooling pipe, heavy water system. Loss of primary coolant causes loss of pressure in the primary circuit at the coolant input in the reactor vessel. This initiates safety protection system which should automatically shutdown the reactor. Separate chapters are devoted to: after-heat removal, coolant and moderator loss; accident effects on the reactor core, effects in the reactor building, and release of radioactive wastes [sr

Causes of Fatal Accidents Involving Cranes in the Australian Construction Industry

Directory of Open Access Journals (Sweden)

Ehsan Gharaie

2015-05-01

Full Text Available In ten years from 2004 to 2013, 359 workers died in the Australian construction industry because of work related causes. This paper investigates crane-related fatalities in order to find the upstream causation of such accidents. The National Coroners’ Information System (NCIS database was searched to identify fatal accidents in the construction industry involving the use of a crane.  The narrative description of the cases provided in the coroners’ findings and associated documents were content analysed to identify the contributing causal factors within the context of each case. The findings show that the most frequent crane-related accident types were those that were struck by load, and electrocution. The most prevalent immediate circumstance causes were layout of the site and restricted space. The two most commonly identified shaping factors were physical site constraints and design of construction process. Inadequate risk management system was identified as the main originating influence on the accidents. This paper demonstrates that a systemic causation model can provide considerable insight into how originating influences, shaping factors, and immediate circumstances combine to produce accidents. This information is extremely useful in informing the development of prevention strategies, particularly in the case of commonly occurring accident types.

Probability safety assessment of LOOP accident to molten salt reactor

International Nuclear Information System (INIS)

Mei Mudan; Shao Shiwei; Yu Zhizhen; Chen Kun; Zuo Jiaxu

2013-01-01

Background: Loss of offsite power (LOOP) is a possible accident to any type of reactor, and this accident can reflect the main idea of reactor safety design. Therefore, it is very important to conduct a study on probabilistic safety assessment (PSA) of the molten salt reactor that is under LOOP circumstance. Purpose: The aim is to calculate the release frequency of molten salt radioactive material to the core caused by LOOP, and find out the biggest contributor to causing the radioactive release frequency. Methods: We carried out the PSA analysis of the LOOP using the PSA process risk spectrum, and assumed that the primary circuit had no valve and equipment reliability data based on the existing mature power plant equipment reliability data. Results: Through the PSA analysis, we got the accident sequences of the release of radioactive material to the core caused by LOOP and its frequency. The results show that the release frequency of molten salt radioactive material to the core caused by LOOP is about 2×10 -11 /(reactor ·year), which is far below that of the AP1000 LOOP. In addition, through the quantitative analysis, we obtained the point estimation and interval estimation of uncertainty analysis, and found that the biggest contributor to cause the release frequency of radioactive material to the core is the reactor cavity cooling function failure. Conclusion: This study provides effective help for the design and improvement of the following molten salt reactor system. (authors)

Experiments to quantify airborne release from packages with dispersible radioactive materials under accident conditions

Energy Technology Data Exchange (ETDEWEB)

Martens, R.; Lange, F. [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Schwertnergasse 1, 50667 Koeln (Germany); Koch, W.; Nolte, O. [Fraunhofer-Institut fuer Toxikologie und Experimentelle Medizin (ITEM), Nikolai-Fuchs-Str.1, 30625 Hannover (Germany)

2005-07-01

For transport or handling accidents involving packages with radioactive materials and the assessment of potential radiological consequences, for the review of current requirements of the IAEA Transport Regulations, and for their possible further development reliable release data following mechanical impact are required. Within this context a research project was carried out which extends the basis for a well-founded examination of the contemporary system of requirements of 'Low Specific Activity' (LSA)-type materials and allows for its further development where appropriate. This project comprises a prior system-analytical examination and an experimental programme aiming at improving the general physical understanding of the release process as well as the quantity and the characteristics of airborne released material for non-fixed dispersible LSA-II material upon mechanical impact. Impaction experiments applying small, medium and real sized specimens of different dispersible materials revealed that the release behaviour of dispersible powders strongly depends upon material properties, e.g. particle size distribution and cohesion forces. The highest experimentally determined release fraction of respirable mass (AED < 10 {mu}m) amounted to about 2 % and was obtained for 2 kg of un-contained easily dispersible pulverized fly ash (PFA). For larger un-contained PFA specimen the release fraction decreases. However, packaging containing powdery material substantially reduces the airborne release fraction. The measured airborne release fractions for a 200 l drum with Type A certificate containing PFA were about a factor of 50 to 100 lower than for un-contained material. For a drop height of 9 m the airborne release fraction amounted to about 4 x 10{sup -5}. This value should be applicable for most of transport and handling accidents with mechanical impact. For a metal container of Type IP-2 or better which contains powder masses of 100 kg or more this release

Causes of fatal accidents for instrument-certified and non-certified private pilots.

Science.gov (United States)

Shao, Bob Siyuan; Guindani, Michele; Boyd, Douglas D

2014-11-01

Instrument certification (IFR) enhances a pilot's skills in precisely controlling the aircraft and requires a higher level of standards in maintaining heading and altitude compared with the less stringent private pilot certificate. However, there have been no prior studies to compare fatal accident causes for airmen with, and without, this rating, The NTSB accident database was queried for general aviation fatal accidents for private pilots with, and without IFR certification. Exact Poisson tests were used to calculate whether two rate parameters were equal (ratio of 1), normalized to the number of IFR-rated pilots and flight hours in the given time period. Proportion tests were used to determine whether there were significant differences in fatal accident causes between IFR-certified and non-certified pilots. A logistic regression for log-odds success was used in determining the trend and effect of age on fatal accident rates. IFR certification was associated with a reduced risk of accidents due to failure to maintain obstacle/terrain clearance and spatial disorientation for day and night operations respectively. In contrast, the likelihood of fatal accident due to equipment malfunction during day operations was higher for IFR-certified pilots. The fatal accident rate decreased over the last decade for IFR-certified but not for non-IFR-certified private pilots. However, the overall accident rate for IFR-certified private pilots was more than double that of the cohort lacking this certification. Finally, we found a trend for an increased fatality rate with advancing age for both group of pilots. Our findings informs on where training and/or technology should be focused. Both training for aerodynamic stalls, which causes over a quarter of all fatal accidents, should be intensified for both IFR-certified and non-certified private pilots. Similarly, adherence to minimum safe altitudes for both groups of pilots should be encouraged toward reducing the fatal accidents

Severe accident management. Optimized guidelines and strategies

International Nuclear Information System (INIS)

Braun, Matthias; Löffler, Micha; Plank, Hermann; Asse, Dietmar; Dimmelmeier, Harald

2014-01-01

The highest priority for mitigating the consequences of a severe accident with core melt lies in securing containment integrity, as this represents the last barrier against fission product release to the environment. Containment integrity is endangered by several physical phenomena, especially highly transient phenomena following high-pressure reactor pressure vessel failure (like direct containment heating or steam explosions which can lead to early containment failure), hydrogen combustion, quasi-static over-pressure, temperature failure of penetrations, and basemat penetration by core melt. Each of these challenges can be counteracted by dedicated severe accident mitigation hardware, like dedicated primary circuit depressurization valves, hydrogen recombiners or igniters, filtered containment venting, containment cooling systems, and core melt stabilization systems (if available). However, besides their main safety function these systems often have also secondary effects that need to be considered. Filtered containment venting causes (though limited) fission product release into the environment, primary circuit depressurization leads to loss of coolant, and an ex-vessel core melt stabilization system as well as hydrogen igniters can generate high pressure and temperature loads on the containment. To ensure that during a severe accident any available systems are used to their full beneficial extent while minimizing their potential negative impact, AREVA has implemented a severe accident management for German nuclear power plants. This concept makes use of extensive numerical simulations of the entire plant, quantifying the impact of system activations (operational systems, safety systems, as well as dedicated severe accident systems) on the accident progression for various scenarios. Based on the knowledge gained, a handbook has been developed, allowing the plant operators to understand the current state of the plant (supported by computational aids), to predict

Two decades of radiological accidents direct causes, roots causes and consequences

Directory of Open Access Journals (Sweden)

Rozental Jose de Julio

2002-01-01

of Safety Performance and Safety Culture. Accident investigation is the first step toward avoiding future injures and financial losses, by prevention of recur recurrence. On the other hand, accident investigation is also essential for the establishment of the responsibilities and liability for the consequences. This document discuss the main accidents that have happened in the last two decades, in terms of causes, consequences, similarities and lessons learned when sealed sources have been damaged, lost, stolen and abandoned. In considerable majority death and serious injuries were resulted from failures in the safety system for radiation sources and for the security of radioactive materials.

About the causes and circumstances of the Chernobyl NPP accident

International Nuclear Information System (INIS)

Shteynberg, N.

1992-01-01

The Chernobyl accident is the product of unsatisfactory solutions to scientific-technical, socio-economic and human problems. The documentarily recorded power excursion of the reactor and its rise velocity as well as the quick pressure rise in the separator drum admit the conclusion that the cause of the accident was the rapid power excursion of the reactor and not some external influence. (DG) [de

Application of the ALARA principle to minimize the collective dose in NPP accident management within the containment

International Nuclear Information System (INIS)

Bogorad, V.; Slepchenko, O.; Kyrylenko, Y.

2016-01-01

The paper focuses on application of the ALARA principle to minimize the collective doses (both for NPP personnel and the public) related to admission of personnel to the containment for accident management activities and depending on operation of ventilation systems. Results from assessment of radiation consequences are applied to a small - break LOCA with failure of LPIS at VVER - 1000 reactors. The public doses are evaluated using up - to - date RODOS, MACCS and HotSpot software for assessment of radiation consequences. The personnel doses are evaluated with MicroShield and InterRAS codes. The time function and optimal value of the collective dose are defined. The developed approach can be applied for minimization of the collective dose for optimization of accident management strategies at NPPs

Root causes of the Chernobyl accident: hindsight through years

International Nuclear Information System (INIS)

Kopchinskij, G.A.; Shtejnberg, N.A.

1999-01-01

The objective of the article was not to evaluate the status of nuclear safety in this country. We wished to raise another question analysing the Chernobyl accident occurred in April 1986 is not the end in itself and the analysis must not be retrospective. The objective is to draw the normal for nuclear safety nowadays and in the future in order to prevent the very possibility of another accident entailing severe radiological consequences. In our opinion, discussions on any details of physical and thermohydraulic processes occurred in April 1986 can and even must be the matter of due consideration. There are all the reasons to state that no due conclusions were drawn in Ukraine further to the analysis of the Chernobyl accident causes

Ruthenium release modelling in air and steam atmospheres under severe accident conditions using the MAAP4 code

International Nuclear Information System (INIS)

Beuzet, Emilie; Lamy, Jean-Sylvestre; Perron, Hadrien; Simoni, Eric; Ducros, Gérard

2012-01-01

Highlights: ► We developed a new modelling of fuel oxidation and ruthenium release in the EDF version of the MAAP4 code. ► We validated this model against some VERCORS experiments. ► Ruthenium release prediction quantitatively and qualitatively well reproduced under air and steam atmospheres. - Abstract: In a nuclear power plant (NPP), a severe accident is a low probability sequence that can lead to core fusion and fission product (FP) release to the environment (source term). For instance during a loss-of-coolant accident, water vaporization and core uncovery can occur due to decay heat. These phenomena enhance core degradation and, subsequently, molten materials can relocate to the lower head of the vessel. Heat exchange between the debris and the vessel may cause its rupture and air ingress. After lower head failure, steam and air entering in the vessel can lead to degradation and oxidation of materials that are still intact in the core. Indeed, Zircaloy-4 cladding oxidation is very exothermic and fuel interaction with the cladding material can decrease its melting temperature by several hundred of Kelvin. FP release can thus be increased, noticeably that of ruthenium under oxidizing conditions. Ruthenium is of particular interest because of its high radio-toxicity due to 103 Ru and 106 Ru isotopes and its ability to form highly volatile compounds, even at room temperature, such as gaseous ruthenium tetra-oxide (RuO 4 ). It is consequently of great need to understand phenomena governing steam and air oxidation of the fuel and ruthenium release as prerequisites for the source term issues. A review of existing data on these phenomena shows relatively good understanding. In terms of oxygen affinity, the fuel is oxidized before ruthenium, from UO 2 to UO 2+x . Its oxidation is a rate-controlling surface exchange reaction with the atmosphere, so that the stoichiometric deviation and oxygen partial pressure increase. High temperatures combined with the presence

Tellurium chemistry, tellurium release and deposition during the TMI-2 accident

International Nuclear Information System (INIS)

Vinjamuri, K.; Sallach, R.A.; Osetek, D.J.; Hobbins, R.R.; Akers, D.W.

1985-01-01

This paper presents the chemistry and estimated behavior of tellurium during and after the accident at Three Mile Island Unit-2. The discussion of tellurium behavior is based on all available measurement data for /sup 129m/Te, 132 Te, stable tellurium ( 126 Te, 128 Te, and 130 Te), and best estimate calculations of tellurium release and transport. Results from Oak Ridge National Laboratory (ORNL) tests, Power Burst Facility (PBF) Severe Fuel Damage Tests at Idaho National Engineering Laboratory (INEL) and SASCHA tests from Karlsruhe, W. Germany are compared with calculated release fractions and samples taken from TMI Unit-2. It is concluded that very little tellurium was released and transported from the TMI-2 core, probably as a result of holdup by zircaloy cladding and other structural materials. 37 refs., 12 figs., 4 tabs

Tellurium chemistry, tellurium release and deposition during the TMI-2 accident

International Nuclear Information System (INIS)

Vinjamuri, K.; Sallach, R.A.; Osetek, D.J.; Hobbins, R.R.; Akers, D.W.

1985-08-01

This report presents the chemistry and estimated behavior of tellurium during and after the accident at Three Mile Island Unit-2. The discussion of tellurium behavior is based on all available measurement data for /sup 129 m/Te, 132 Te, stable tellurium ( 126 Te, 128 Te, and 130 Te), and best estimate calculations of tellurium release and transport. Results from Oak Ridge National Laboratory (ORNL) tests, Power Burst Facility (PBF) Severe Fuel Damage Tests at Idaho National Engineering Laboratory (INEL) and SASCHA tests from Karlsruhe, W. Germany are compared with calculated release fractions and samples taken from TMI Unit-2. It is concluded that very little tellurium was released and transported from the TMI-2 core, probably as a result of holdup by zircaloy cladding and other structural materials. 39 refs., 24 figs., 17 tabs

Analysis of accident caused by temperature increase at the RA reactor in Vinca

International Nuclear Information System (INIS)

Afgan, N; Kulundzic, P.

1964-06-01

The objective of this work was to determine the maximum time interval without accident due to mechanical failures. The following accidents caused by mechanical failures are taken into account: loss of moderator flow, moderator leaking with or without circulation, and accidents caused by removal of fuel channels from the reactor vessel. Obtained numerical and experimental results are presented. Experimental device installed at the reactor was used for verification of calculation results. The analysis was done for the most damaging conditions and thus the obtained results represent the lowest boundary values [sr

Runaway reactions. Part 2 Causes of Accidents in selected CSB case histories Part 2

OpenAIRE

GYENES ZSUZSANNA; CARSON PHILLIP

2017-01-01

Part 1 briefly discussed the basic thermochemistry of reactive chemicals, the statistics of accidents involving runaway reactions, and general control measures to minimise risk and mitigate the consequences. The present paper highlights the main causes of major accidents from runaway reactions with illustrative case histories to link theory and practice. It also discusses lessons learned from these accidents, which are very similar in the cases studied. The main causes are management deficien...

Risk Analysis of Fukushima Accident using MACCS2

Energy Technology Data Exchange (ETDEWEB)

Lee, Seunghee; Kim, Juyoul; Kim, Sukhoon; Kim, Juyub [FNC Technology Co. Ltd., Yongin (Korea, Republic of)

2014-05-15

It has been three years since Fukushima Daiichi accident had occurred. Many efforts have been done for a restoration, however, radioactive materials are still released resulting in a crucial additional damage to a human health and economics and the scale of damage is not much evaluated. Therefore, an estimation of damage degree caused by the released radioactive materials right after a nuclear accident is essential to cope with additional radioactive problems. Here, we report the risk analysis of Fukushima Dai-ichi accident using MELCOR Accident Consequence Code System 2 (MACCS2), which is the Nuclear Regulatory Commission's (NRC's) code for evaluating off-site consequences. It is used in level-3 Probabilistic Risk Analyses (PRA), for planning purposes, for cost-benefit analyses and so on. The purpose of this study is to estimate radiological doses and health risks of Fukushima Daiichi accident through short- and long-term of lifetime using MACCS2. In summary, the health risk for inhabitants near Fukushima Daiichi NPP has been evaluated by considering the long term radiation effect using MACCS2 code. The result indicates that the occurrence and death rate of the cancer have been increased by the radioactive materials released from Fukushima Daiichi accident. The result obtained in this study may provide new insights for taking action after the nuclear reactor accident to mitigate the released radioactive materials and to prepare the countermeasure.

[Accidents and violence in childhood: survey evidence of emergency care for external causes--Brazil, 2009].

Science.gov (United States)

Malta, Deborah Carvalho; Mascarenhas, Márcio Dênis Medeiros; Bernal, Regina Tomie Ivata; Viegas, Anna Paula Bise; de Sá, Naiza Nayla Bandeira; da Silva Junior, Jarbas Barbosa

2012-09-01

Understanding the characteristics and magnitude of accidents and violence due to external causes in children from 0 to 9 years of age is becoming ever more important in Public Health. The scope of this paper was to analyze emergency care for accidents due to external causes in children. The Sentinel Urgency and Emergency Services of the Violence and Accident Vigilance System (VIVA Survey), performed in 74 urgency services in the Federal District and 23 State capitals in 2009 was used. Data of 7,123 children were analyzed: 6,897 (96.7%) victims of accidents and 226 (3.3%) of violence. In comparison with victims of violence, the visits for accidents were more frequent among white children from 2 to 5 years old occurring in the home (p accidents, falls and burns predominated in the 0 to 1group, while traffic accidents were most frequent in the 6 to 9-year-old age group (p < 0.001). With respect to violence, the visits for neglect and physical assault predominated, respectively, in extreme age groups, with someone in the family being the perpetrator (p < 0.001). Information on the occurrence of external causes in children may support health promotion policies, besides guiding health professionals, teachers and families in the prevention of such causes.

The Chernobyl accident, a catastrophe or an eye-opener?

International Nuclear Information System (INIS)

Baarli, J.

1989-01-01

The Chernobyl accident is reviewed as to its cause, the way it was handled locally and the consequenses from released radioactivity. It is emphasized that the exposure from the released radioactivity, as to the effective dose equivalent and the committed dose equivalent is small and comparable with the dose equivalent from natural ionizing radiation near the accident, and only a few per cent of this value at more remote distances. It is concluded that the accident probably has been one of the greatest psychological catastrophes that we so far has experienced, but not so when referring to early deaths or radiation damage directly to individuals

The prevention of radiological accidents (how to avoid or minimize potential exposures)

International Nuclear Information System (INIS)

Touzet, Rodolfo E.

2006-01-01

A detailed analysis of 7 major accidents occurred in radiotherapy services in different countries is performed. Then a generic analysis of the causes is realized and finally the methodology used to prevent them effectively is described [es

Techniques to limit gaseous releases in case of reactor accident. Choice criteria - present solutions

International Nuclear Information System (INIS)

Billard, Francois; Lavie, Jean-Marie

1964-10-01

Within the frame of the study of radiological risks associated with a reactor accident in order to define the required responses, this study comprises, on the one hand, an analysis of the different accident types in order to select typical accidents, and on the other hand, a site-based analysis to define the maximum admissible radioactivity release for a given site. The determination of minimum required coefficient of risk reduction results from a compromise between the choice of reactor configuration type and the efficiency of purification devices, while taking into account minimum characteristics of the enclosure mechanical strength, local release conditions, and nature of gaseous effluents to be processed. After a review of available containment techniques, the author applies this analysis method to the different French reactor types. He gives a brief description of adopted solutions for the most typical French reactors in terms of characteristics of venting and filtration devices. As data quality is a crucial requirement, the author outlines the need for further studies regarding fission product emission and transfer, the purification of gaseous effluents and their diffusion in the atmosphere [fr

Accident management for severe accidents

International Nuclear Information System (INIS)

Bari, R.A.; Pratt, W.T.; Lehner, J.; Leonard, M.; Disalvo, R.; Sheron, B.

1988-01-01

The management of severe accidents in light water reactors is receiving much attention in several countries. The reduction of risk by measures and/or actions that would affect the behavior of a severe accident is discussed. The research program that is being conducted by the US Nuclear Regulatory Commission focuses on both in-vessel accident management and containment and release accident management. The key issues and approaches taken in this program are summarized. 6 refs

Aerosols released in accidents in reprocessing plants

International Nuclear Information System (INIS)

Ballinger, M.Y.; Owczarski, P.C.; Hashimoto, K.; Nishio, G.; Jordan, S.; Lindner, W.

1987-01-01

For analyzing the thermodynamic and radiological consequences of solvent fire accidents in reprocessing plants, intensive investigations on burning contaminated condensible liquids were performed at Kernforschungszentrum Karlsruhe (KfK), Pacific Northwest Laboratory (PNL), and Japan Atomic Energy Research Institute (JAERI). In small- and large-scale tests, KfK studied the behavior of kerosene, tributyl phosphate, HNO 3 mixture fires in open air and closed containments. The particle release from uranium-contaminated pool fires was investigated. Different filter devices were tested. For analyzing fires, PNL has developed the FIRIN computer code and has generated small-scale fire data in support of that code. The results of the experiments in which contaminated combustible liquids were burned demonstrate the use of the FIRIN code in simulating a solvent fire in a nuclear reprocessing plant. To demonstrate the safety evaluation of a postulated solvent fire in an extraction process of a reprocessing pant, JAERI conducted large-scale fire tests. Behavior of solvent fires in a cell and the integrity of high-efficiency particulate air (HEPA) filters due to smoke plugging were investigated. To evaluate confinement of radioactive materials released from the solvent fire, the ventilation systems with HEPA filters were tested under postulated fire conditions

Consequences in Norway of a hypothetical accident at Sellafield: Potential release - transport and fallout

International Nuclear Information System (INIS)

Ytre-Eide, M. A.; Standring, W.J.F.; Amundsen, I.; Sickel, M.; Liland, A.; Saltbones, J.; Bartnicki, J.; Haakenstad, H.; Salbu, B.

2009-03-01

This report focuses on transport and fallout from 'worst-case' scenarios based on a hypothetical accident at the B215 facility for storing Highly Active Liquors (HAL) at Sellafield. The scenarios involve an atmospheric release of between 0.1-10 % of the total HAL inventory; only transport and fallout of 137 Cs is considered in this case study. Simulations resulted in between 0.1-50 times the maximum 137 Cs fallout experienced in the most contaminated areas in Norway after the Chernobyl accident. (Author)

[Accident cause masculinity?--Gender-related issues of accident victims between prevention and coping in Kaiserreich and Weimarer Republik].

Science.gov (United States)

Knoll-Jung, Sebastian

2015-01-01

Occupational accidents in industrial workplaces are a specific health problem for man. Therefore it seems adequate to use masculinities as a category of research in this field. For the Kaiserreich and the Weimarer Republik it shows that male workers relating to their danger awareness and behavior, prevention, accident causes and coping strategies are settled in an area of conflict between a hard workplace environment and the family. On the basis of health practices of the accident victims it appears that there are different forms of labor masculinities. They have an important influence on all levels of an occupational accident from the endangerment to the success of the treatment. Through a critical use of the category academic void can be shown and alternative explanatory models can be offered.

The retardation effect of structural graphite on the release of fission products in case of hypothetical accidents of HTRs

International Nuclear Information System (INIS)

Iniotakis, N.; Decken, C.B. von der

1982-01-01

In case of a hypothetical core heat up accident of an HTR the structural graphite of the reactor causes under certain circumstances a very important retardation of the release of fission products into the containment building of the plant. A model is presented which describes the transport phenomena in the graphite structure extensively taking into account specially the macro-structure of the graphite. It is shown by parameter variations under which conditions one can expect a large retardation effect and quantitative values of this retardation, which can be very important, are given. (author)

The post-accident protective measures in the region of the Chernobyl catastrophe

International Nuclear Information System (INIS)

Pasechnikov, A.

1993-01-01

The strategy of protective measures and the system of intervention levels are considered. It makes it possible to limit the region where post-accident measures must be taken. The concept of 'safe living' for life and surface contamination concept are discussed. The measurement results of a surface contamination are pointed out in the maps for series settlements of the 30 km zone. The features of severe accidents to nuclear power plants are that damage is caused not only by destruction and downtime of power installations, but also by radioactive contamination of the environment. Therefore, the term 'severe accident' is accepted to mean an accident with an off-site impact, which requires to perform large-scale and expensive work on elimination of the consequences of the accident. The whole off-site damage due to the Chernobyl accident is caused exclusively by contamination, as no destruction was observed beyond the site. As a result of the Chernobyl accident the greatest short-term releases of radioactive materials to the atmosphere occurred from a single source. Four elements from all the materials released from the core have determined the short-term and long-term radiological situation in the affected areas. These are iodine, cesium, strontium and plutonium. Moreover, in the releases there were highly - radioactive fragments of fuel (hot particles). 7 figs

Utilization of the atmospheric release advisory capability (ARAC) services during and after the Three Mile Island accident

International Nuclear Information System (INIS)

Knox, J.B.; Dickerson, M.H.; Greenly, G.D.; Gudiksen, P.H.; Sullivan, T.J.

1980-01-01

At 0820 PST on 28 March 1979, the Department of Energy's Emergency Operations Center advised the Atmospheric Release Advisory Capability (ARAC) that the Three Mile Island nuclear power plant in Harrisburg, Pennsylvania, had experienced an accident some four hours earlier, resulting in the atmospheric release of xenon-133 and krypton-88. This report describes ARAC's response to the Three Mile Island accident, including the role ARAC played throughout the 20 days that real-time assessments were made available to the Department of Energy on-scene commander. It also describes the follow-up population-dose calculations performed for the President's Commission on Three Mile Island. At the request of the Nuclear Regulatory Commission, a questionnaire addressing the usefulness of ARAC products during the accident was sent to ARAC-product users. A summary of the findings from this questionnaire, along with recommendations for improving ARAC service, is also presented. The accident at Mississauga, Ontario, Canada, is discussed in the context of a well-planned emergency response by local and Federal officials

EMERALD, Radiation Release and Dose after PWR Accident for Design Analysis and Operation Analysis

International Nuclear Information System (INIS)

Brunot, W.K.; Fray, R.R.; Gillespie, S.G.

1988-01-01

1 - Description of problem or function: The EMERALD program is designed for the calculation of radiation releases and exposures resulting from abnormal operation of a large pressurized water reactor (PWR). The approach used in EMERALD is similar to an analog simulation of a real system. Each component or volume in the plant which contains a radioactive material is represented by a subroutine which keeps track of the production, transfer, decay and absorption of radioactivity in that volume. During the course of the analysis of an accident, activity is transferred from subroutine to subroutine in the program as it would be transferred from place to place in the plant. For example, in the calculation of the doses resulting from a loss-of-coolant accident the program first calculates the activity built up in the fuel before the accident, then releases some of this activity to the containment volume. Some of this activity is then released to the atmosphere. The rates of transfer, leakage, production, cleanup, decay, and release are read in as input to the program. Subroutines are also included which calculate the on-site and off-site radiation exposures at various distances for individual isotopes and sums of isotopes. The program contains a library of physical data for the twenty-five isotopes of most interest in licensing calculations, and other isotopes can be added or substituted. Because of the flexible nature of the simulation approach, the EMERALD program can be used for most calculations involving the production and release of radioactive materials during abnormal operation of a PWR. These include design, operational, and licensing studies. 2 - Method of solution - Explicit solutions of first-order linear differential equations are included. In addition, a subroutine is provided which solves a set of simultaneous linear algebraic equations. 3 - Restrictions on the complexity of the problem - Maxima of: 25 isotopes, 7 time periods, 15 volumes or components, 10

Radionuclide release calculations for selected severe accident scenarios. Volume 3. PWR, subatmospheric containment design

International Nuclear Information System (INIS)

Denning, R.S.; Gieseke, J.A.; Cybulskis, P.; Lee, K.W.; Jordan, H.; Curtis, L.A.; Kelly, R.F.; Kogan, V.; Schumacher, P.M.

1986-07-01

This report presents results of analyses of the enviromental releases of fission products (source terms) for severe accident scenarios in a pressurized water reactor with a subatmospheric containment design. The analyses were performed to support the Severe Accident Risk Reduction/Risk Rebaselining Program (SARRP) which is being undertaken for the US Nuclear Regulatory Commission by Sandia National Laboratories. In the SARRP program, risk estimates are being generated for a number of reference plant designs. the Surry plant has been used in this study as the reference plant for a subatmospheric design

Fukushima. The accident sequence and important causes. Pt. 1/3

International Nuclear Information System (INIS)

Pistner, Christoph

2013-01-01

On March 11, 2011 a strong earthquake at the east coast of Japan and a subsequent tsunami caused severe damage at the NPP site of Fukushima Daiichi. The article covers the fundamental safety aspects of the accident progress according to the state of knowledge. The principles of nuclear technology and reactor safety are summarized in order to allow the understanding of the accidental sequence. Even two years after the disaster many questions on the sequence of accident events are still open.

Release of gases and their influence on containment integrity during a hypothetical meltdown accident

International Nuclear Information System (INIS)

Hassmann, K.; Reimann, M.

1981-01-01

The sequence of a hypothetical core melt down accident has been subdivided into four phases. Heating up of the core until failure of the core support structure is the first phase. It starts at a certain water level in the reactor pressure vessel (RPV) and ends with the failure of the grid plate. The second phase is characterized by the evaporation of the water in the lower plenum of the RPV. The second phase lasts until a molten core debris is formed. The third phase is concerned with the heating up of the pressure vessel after formation of a molten pool in the lower plenum of the RPV. After pressure vessel failure, the molten corium will interact in the fourth phase with the concrete structure beneath the pressure vessel. In this paper the gas release during all four accident phases and the resulting pressure-time history within the containment of a German standard PWR is given, taking into account violent combustion of hydrogen. In particular, the differences caused by dsestruction of concrete with silicious and with calcareous aggregates has been analyzed. The basis for the results in the 4th phase is the WECHSL code. Long term containment calculations have been performed with the COCMEL-code

School sports accidents: analysis of causes, modes, and frequencies.

Science.gov (United States)

Kelm, J; Ahlhelm, F; Pape, D; Pitsch, W; Engel, C

2001-01-01

About 5% of all school children are seriously injured during physical education every year. Because of its influence on children's attitude toward sports and the economic aspects, an evaluation of causes and medical consequences is necessary. In this study, 213 school sports accidents were investigated. Besides diagnosis, the localization of injuries, as well as the duration of the sick leave were documented. Average age of injured students was 13 years. Most of the injured students blamed themselves for the accident. The most common injuries were sprains, contusions, and fractures. Main reasons for the accidents were faults in basic motion training. Playing soccer and basketball were the most frequent reasons for injuries. The upper extremity was more frequently involved than the lower extremity. Sports physicians and teachers should work out a program outlining the individual needs and capabilities of the injured students to reintegrate them into physical education.

Identification and assessment of containment and release management strategies

International Nuclear Information System (INIS)

Lehner, J.R.; Lin, C.C.; Neogy, P.

1993-01-01

Brookhaven National Laboratory, under the auspices of the U.S. Nuclear Regulatory Commission, is investigating accident management strategies which could help preserve containment integrity or minimize the release of radioactivity during a severe accident in a nuclear reactor. The objective is to make use of existing plant systems and equipment in innovative ways to reduce the likelihood of containment failure or to mitigate the release of fission products to the environment if failure cannot be prevented. Many of these strategies would be implemented during the later stages of a severe accident, i.e. after the molten core penetrates the reactor vessel. Significant uncertainties exist regarding some of the phenomena involved with this phase of a severe accident. The identification and assessment process for containment and release strategies is described, and some insights derived from its application to a BWR Mark I plant are presented. A station blackout accident for this kind of plant is considered. The challenges encountered are identified and existing emergency guidelines are reviewed, where needed and when possible, new strategies are devised. The feasibility and effectiveness of these new strategies are assessed, making due allowances for the complicated phenomena and associated uncertainties involved. Both beneficial and adverse effects of the suggested strategies are considered. (orig.)

French practice for assessing the fission product releases from the containment during a PWR severe accident

International Nuclear Information System (INIS)

Duco, J.; Dufresne, J.; L'homme, A.

1988-10-01

French safety philosophy as concerns severe PWR accidents has already been outlined by the Director of CEA/IPSN in an article published in ''Nuclear Safety''. Therefore the present paper will focus on: a) the French reference source terms, as used for elaborating ultimate emergency procedures on PWRs and for emergency planning; b) the methods currently developed for more realistic assessments of the release of fission products during a severe accident

OCCUPATIONAL ACCIDENTS WITH BIOLOGICAL MATERIALS IN CLINICAL ANALYSIS LABORATORY: CAUSES AND CONSEQUENCES

Directory of Open Access Journals (Sweden)

T. M. Azevedo

2014-07-01

Full Text Available Accidents involving biological material can cause diseases to the professional healthcare and also bring psychosocial effects. The aim of this study was to characterize the accidents occurring with biological material with professional of clinical laboratories of Sinop-MT. Data were collected by a questionnaire consisting of sociodemographic and health variables. 21 (87.5% of respondents stated that they never suffered any kind of accident. One of the injured workers reported that there was involvement in your emotional life. It is observed underreporting of occupational accidents by employees affected, making it difficult to increase research on the subject and actions about the problem.

Assessment of the most significant causes of transportation and machinery accidents on collieries

CSIR Research Space (South Africa)

Oberholzer, JW

1995-08-01

Full Text Available The purpose of this study is to identify those areas, classified according to the SAMRASS data base system under the codes relating to underground transport and machinery type accidents that give cause to the greatest amount of accidents...

Landing Distance Minimization to Prevent Overrun Accidents Using Field Theory and Stabilizing Air Traffic - A Novel Approach

Science.gov (United States)

Krishna Kumar, R.; Navaneeth, M.; Shachin Shibi, R.

2017-09-01

Airplane is considered to be the pinnacle of engineering as it has proven that it is possible for a manmade object to fly. Before its invention, flying was just a dream for mankind. In such an esteemed domain, landing is the most challenging part and it is where a large number of accidents occur, especially due to overrun. As the name suggests, overrun accidents occur due to insufficient runway length. In the present study, the concept of planar electromagnetic fields is incorporated to minimize the landing distance of an aircraft, thus preventing the overrun accidents. As a result, unexpected losses can be avoided. In addition to this, the stability of air traffic control can be perpetuated and the fuel consumed during loitering time can be diminished.

The Chernobyl reactor accident source term: development of a consensus view

International Nuclear Information System (INIS)

Devell, L.; Guntay, S.; Powers, D.A.

1995-11-01

Ten years after the reactor accident at Chernobyl, a great deal more data is available concerning the events, phenomena, and processes that took place. The purpose of this document is to examine what is known about the radioactive materials released during the accident, a task that is substantially more difficult than it might first appear to be. The Chernobyl station, like other nuclear power plants, was not instrumented to characterize a disastrous accident. The accident was peculiar in the sense that radioactive materials were released, at least initially, in an exceptionally energetic plume and were transported far from the reactor site. Release of radioactivity from the plant continued for several days. Characterization of the contamination caused by the releases of radioactivity has had a much lower priority than remediation of the contamination. Consequently, an assessment of the Chernobyl accident source term must rely to a significant extent on inferential evidence. The assessment presented here begins with an examination of the core inventories of radioactive materials. In subsequent sections of the report, the magnitude and timing of the releases of radioactivity are described. Then, the composition, chemical forms, and physical forms of the releases are discussed. A number of more recent publications and results from scientists in Russia and elsewhere have significantly improved the understanding of the Chernobyl source term. Because of the special features of the reactor design and the peculiarities of the Chernobyl accident, the source term for the Chernobyl accident is of limited applicability to the safety analysis of other types of reactors

Agricultural measures to reduce radiation doses to man caused by severe nuclear accidents

International Nuclear Information System (INIS)

Dorp, F. van; Eleveld, R.; Frissel, M.J.

1981-01-01

Agricultural land and products may become contaminated after a severe nuclear accident. If radiation doses to man caused by the ingestion of contaminated agricultural products from such areas will be unacceptably high, measures to reduce this radiation dose will have to be taken. Radiation doses to man can be estimated by using models which describe quantitatively the transfer of radionuclides through the biosphere. The following processes and pathways are described in this study: accidental releases into atmospheric environments and subsequent nearby deposition; contamination of crops by direct deposition and the subsequent short term pathway (e.g. grass-cow-milk-man); contamination of soil and the subsequent long term pathway (e.g. soil-crop-man, soil-grass-cattle-milk/meat-man). Depending on the degree of contamination and on the estimated radiation doses to man, various measures are advised. (Auth.)

French policy for managing the post-accident phase of a nuclear accident.

Science.gov (United States)

Gallay, F; Godet, J L; Niel, J C

2015-06-01

In 2005, at the request of the French Government, the Nuclear Safety Authority (ASN) established a Steering Committee for the Management of the Post-Accident Phase of a Nuclear Accident or a Radiological Emergency, with the objective of establishing a policy framework. Under the supervision of ASN, this Committee, involving several tens of experts from different backgrounds (e.g. relevant ministerial offices, expert agencies, local information commissions around nuclear installations, non-governmental organisations, elected officials, licensees, and international experts), developed a number of recommendations over a 7-year period. First published in November 2012, these recommendations cover the immediate post-emergency situation, and the transition and longer-term periods of the post-accident phase in the case of medium-scale nuclear accidents causing short-term radioactive release (less than 24 h) that might occur at French nuclear facilities. They also apply to actions to be undertaken in the event of accidents during the transportation of radioactive materials. These recommendations are an important first step in preparation for the management of a post-accident situation in France in the case of a nuclear accident. © The Chartered Institution of Building Services Engineers 2014.

ORNL experiments to characterize fuel release from the reactor primary containment in severe LMFBR accidents

International Nuclear Information System (INIS)

Wright, A.L.; Kress, T.S.; Smith, A.M.

1980-01-01

This paper presents results from aerosol source term experiments performed in the ORNL Aerosol Release and Transport (ART) Program sponsored by the US NRC. The tests described were performed to provide information on fuel release from an LMFBR primary containment as a result of a hypothetical core-disruptive accident (HCDA). The release path investigated in these tests assumes that a fuel/sodium bubble is formed after disassembly that transports fuel and fission products through the sodium coolant and cover gas to be relased into the reactor secondary containment. Due to the excellent heat transfer characteristics of the sodium, there is potential for large attenuation of the maximum release

Causes and risk factors for fatal accidents in non-commercial twin engine piston general aviation aircraft.

Science.gov (United States)

Boyd, Douglas D

2015-04-01

Accidents in twin-engine aircraft carry a higher risk of fatality compared with single engine aircraft and constitute 9% of all general aviation accidents. The different flight profile (higher airspeed, service ceiling, increased fuel load, and aircraft yaw in engine failure) may make comparable studies on single-engine aircraft accident causes less relevant. The objective of this study was to identify the accident causes for non-commercial operations in twin engine aircraft. A NTSB accident database query for accidents in twin piston engine airplanes of 4-8 seat capacity with a maximum certified weight of 3000-8000lbs. operating under 14CFR Part 91 for the period spanning 2002 and 2012 returned 376 accidents. Accident causes and contributing factors were as per the NTSB final report categories. Total annual flight hour data for the twin engine piston aircraft fleet were obtained from the FAA. Statistical analyses employed Chi Square, Fisher's Exact and logistic regression analysis. Neither the combined fatal/non-fatal accident nor the fatal accident rate declined over the period spanning 2002-2012. Under visual weather conditions, the largest number, n=27, (27%) of fatal accidents was attributed to malfunction with a failure to follow single engine procedures representing the most common contributing factor. In degraded visibility, poor instrument approach procedures resulted in the greatest proportion of fatal crashes. Encountering thunderstorms was the most lethal of all accident causes with all occupants sustaining fatal injuries. At night, a failure to maintain obstacle/terrain clearance was the most common accident cause leading to 36% of fatal crashes. The results of logistic regression showed that operations at night (OR 3.7), off airport landings (OR 14.8) and post-impact fire (OR 7.2) all carried an excess risk of a fatal flight. This study indicates training areas that should receive increased emphasis for twin-engine training/recency. First, increased

The Monju accident. Causes and effects

International Nuclear Information System (INIS)

Marth, W.

1996-01-01

On December 8, 1995, the Japanese prototype fast breeder reactor, Monju, suffered an accident which aroused considerable national and international attention. A thermocouple in a pipe carrying sodium in the secondary plant system had broken, causing some 700 kg of non-radioactive sodium to be spilled. The safety of the reactor, of the plant crew, and of the environment was not jeopardized. However, as a consequence of some badly handled public relations, rather negative reactions of the public authorities and of the public at large were encountered. One member of the investigating committee, facing a conflict of loyalities not uncommon in Japan, even committed suicide. According to current estimates, Monju will be down for at least two years, thus causing major financial problems to the operator, PNC. On the political level, more difficulties are expected to arise in the introduction of plutonium recycling. (orig.) [de

The nuclear reactor accident at Windscale - October, 1957: Environmental aspects

Energy Technology Data Exchange (ETDEWEB)

Loutit, J F; Marley, W G; Russell, R S

1960-12-01

The nature and cause of the nuclear reactor accident at Windscale in October, 1957, have been described in the summary report of the Committee of Inquiry set up by the Atomic Energy Authority. This report was published in a Command Paper Atomic Energy Office, 1957). The events leading up to the accident occurred on the 8th October, during a routine release of the energy which had become stored in the graphite moderator as a result of the normal operation of the reactor. The Committee concluded that the accident had been caused by local overheating of the uranium fuel elements, the canning of which then failed exposing the uranium and allowing it to oxidize. The temperatures in the affected channels continued to rise, leading to the combustion of the graphite. The amount of radioactivity released during the accident is not known precisely, but approximate estimates were made from the measurements of the radioactive iodine deposited on the ground in this country, and from measurements on air filters obtained both in the United Kingdom and on the continent of Europe.

The nuclear reactor accident at Windscale - October, 1957: Environmental aspects

International Nuclear Information System (INIS)

Loutit, J.F.; Marley, W.G.; Russell, R.S.

1960-01-01

The nature and cause of the nuclear reactor accident at Windscale in October, 1957, have been described in the summary report of the Committee of Inquiry set up by the Atomic Energy Authority. This report was published in a Command Paper Atomic Energy Office, 1957). The events leading up to the accident occurred on the 8th October, during a routine release of the energy which had become stored in the graphite moderator as a result of the normal operation of the reactor. The Committee concluded that the accident had been caused by local overheating of the uranium fuel elements, the canning of which then failed exposing the uranium and allowing it to oxidize. The temperatures in the affected channels continued to rise, leading to the combustion of the graphite. The amount of radioactivity released during the accident is not known precisely, but approximate estimates were made from the measurements of the radioactive iodine deposited on the ground in this country, and from measurements on air filters obtained both in the United Kingdom and on the continent of Europe

Control assembly ejection accident analysis for WWER-440 (Armenian NPP)

International Nuclear Information System (INIS)

Bznuni, S.; Malakyan, Ts.; Amirjanyan, A.; Ghasabyan, L.

2007-01-01

Control Assembly ejection in WWER-440 initiated by the loss of integrity of the Control Assemblies drive housing has been analyzed. This event causes a very rapid reactivity insertion to the core and small break LOCA which potentially could lead to rapid power increase and redistribution of heat release in the core resulting in a fuel, cladding and coolant temperature rise; primary pressure increase, radiological consequences due to loss of primary coolant and potential loss of cladding integrity and fuel disintegration (if applicable). Methodology of the analysis is based on conservative assumptions as well as on deterministic approach for selection of functioning logic of systems and equipment's to maximize reactor core power and minimize power decreasing reactivity feedback. Computational analyses were performed by 3D kinetics PARCS-RELAP coupled code. WWER-440 fuel cross-section libraries, diffusion coefficients and kinetics parameters were calculated by HELOS code. In this paper analysis of accident for Hot Full Power was presented. Results of analysis show that ANPP WWER-440 reactor design meets acceptance criteria prescribed for RIA type design based accidents (Authors)

Urban violence is the biggest cause of fatal work-related accidents in Brazil.

Science.gov (United States)

Cordeiro, Ricardo; Luz, Verônica Gronau; Hennington, Élida Azevedo; Martins, Ana Cláudia Alves; Tófoli, Luís Fernando

2017-12-11

To quantify the occurrence of deaths directly associated with urban violence among fatal work-related accidents. Verbal autopsies were performed with the relatives and coworkers of residents of Campinas, state of São Paulo, Brazil, who died from external causes in 2015. We have also analyzed police reports and reports of the Legal Medical Institute related to these deaths. We have identified 82 fatal work-related accidents in Campinas in 2015, of which 25 were murders, 35 were traffic accidents not directly related to work activities, and three were suicides at work. The proportional mortality rate for homicides, traffic accidents, and suicides among fatal work-related accidents was estimated at 30.5%, 42.7%, and 3.7%, respectively. Urban violence accounted for three-fourths of the fatal work-related accidents recorded in the period studied.

Iodine removal in containment filtered venting system during nuclear accident

International Nuclear Information System (INIS)

Bera, Subrata; Deo, Anuj Kumar; Nagrale, D.B.; Paul, U.K.; Prasad, M.; Gaikwad, A.J.

2015-01-01

Post Fukushima nuclear accident, containment filtered venting system is being introduced in Indian nuclear power plant to strengthen the defense in depth safety barrier by depressurizing the containment building along with minimization of radioactivity release to environment during a severe accident. Radioactive iodine is one of the major contributors to radiation dose during early release phase of a severe accident. Physical and Chemical form of iodine and iodine bearing compounds includes particulates, elemental and organic. In the most efficient design of CFVS, wet scrubbing mechanism has been employed through use of venture scrubber. The Iodine removal process in wet scrubber involves two processes: chemical reaction in highly alkaline aqueous solution and impingement of particulates with water droplets produced in the venturi nozzle. In this paper, venturi has been modeled using the Calvert model. The variation of efficiency has been estimated for the different particle sizes. The impact of the shape parameter of log-normal distribution on the amount of scrubbed iodine has also been assessed. Release phase wise the scrubbed amount of iodine in the venturi based CFVS system has been estimated for a typical BWR. (author)

Characterization and chemistry of fission products released from LWR fuel under accident conditions

International Nuclear Information System (INIS)

Norwood, K.S.; Collins, J.L.; Osborne, M.F.; Lorenz, R.A.; Wichner, R.P.

1984-01-01

Segments from commercial LWR fuel rods have been tested at temperatures between 1400 and 2000 0 C in a flowing steam-helium atmosphere to simulate severe accident conditions. The primary goals of the tests were to determine the rate of fission product release and to characterize the chemical behavior. This paper is concerned primarily with the identification and chemical behavior of the released fission products with emphasis on antimony, cesium, iodine, and silver. The iodine appeared to behave primarily as cesium iodide and the antimony and silver as elements, while cesium behavior was much more complex. 17 refs., 7 figs., 1 tab

Road accidents caused by sleepy drivers: Update of a Norwegian survey.

Science.gov (United States)

Phillips, Ross Owen; Sagberg, Fridulv

2013-01-01

The current study tests, updates and expands a model of factors associated with sleepy driving, originally based on a 1997 survey of accident-involved Norwegian drivers (Sagberg, F., 1999. Road accidents caused by drivers falling asleep. Accident Analysis & Prevention 31, 639-649). The aim is to establish a robust model to inform measures to tackle sleepy driving. The original questions on (i) tiredness-related accidents and (ii) incidents of sleep behind the wheel in the last 12 months were again posed in 2003 and 2008, in independent surveys of Norwegian drivers involved in accidents reported to a large insurance company. According to those drivers at-fault for the accident, tiredness or sleepiness behind the wheel contributed to between 1.9 and 3.9 per cent of all types of accident reported to the insurance company across these years. Accident-involved drivers not at fault for the accident reported a reduction in the incidence of sleep behind the wheel for the preceding year, decreasing from 8.3 per cent in 1997 to 2.9 per cent in 2008. The reasons for this are not clear. According to logistic regression analysis of survey responses, the following factors were robustly associated with road accidents involving sleepy driving: driving off the road; good road conditions; longer distance driven since the start of the trip; and fewer years with a driving licence. The following factors are consistently associated with reports of sleep behind the wheel, whether or not it leads to an accident: being male; driving further per year; being younger; and having sleep-related health problems. Taken together these findings suggest that young, inexperienced male drivers who drive long distances may be a suitable target for road safety campaigns aimed at tackling sleepy driving. Copyright © 2012 Elsevier Ltd. All rights reserved.

Causes of Fatal Accidents Involving Cranes in the Australian Construction Industry

OpenAIRE

Gharaie, Ehsan; Lingard, Helen; Cooke, Tracy

2015-01-01

In ten years from 2004 to 2013, 359 workers died in the Australian construction industry because of work related causes. This paper investigates crane-related fatalities in order to find the upstream causation of such accidents. The National Coroners’ Information System (NCIS) database was searched to identify fatal accidents in the construction industry involving the use of a crane.  The narrative description of the cases provided in the coroners’ findings and associated documents were conte...

Safeguarding of emergency core cooling in case of loss-of-coolant accidents with insulation material release

International Nuclear Information System (INIS)

Pointner, W.; Broecker, A.

2012-01-01

The report on safeguarding of emergency core cooling in case of loss-of-coolant accidents with insulation material release covers the following issues: assessment of the relevant status for PWR, evaluation of the national and international (USA, Canada, France) status, actualization of recommendations, transferability from PWR to BWR. Generic studies on the core cooling capability in case of insulation material release in BWR-type reactors were evaluated.

Accidents caused by Bothrops and Bothropoides in the State of Paraiba: epidemiological and clinical aspects.

Science.gov (United States)

Oliveira, Fagner Neves; Brito, Monalisa Taveira; Morais, Isabel Cristina Oliveira de; Fook, Sayonara Maria Lia; Albuquerque, Helder Neves de

2010-01-01

Bothrops and Bothropoides snakes cause 70% of the ophidic accidents in Brazil. The species that cause ophidic accidents in State of Paraíba are Bothropoides erythromelas, Bothrops leucurus and Bothropoides neuwiedi. This is a prospective and transverse study, following a quantitative approach of accidents involving Bothrops and Bothropoides admitted to the Toxicological Assistance and Information Centers of Campina Grande and João Pessoa (Ceatox-CG and Ceatox-JP), aimed at identifying the epidemiological and clinical profile of such accidents. All of the patients admitted had medical diagnoses and were monitored at Ceatox-CG or Ceatox-JP. The genera Bothrops and Bothropoides caused 91.7% of the ophidic accidents reported. Snake bites were frequent in men (75.1%), rural workers (65.1%), literate individuals (69%) between 11 and 20 years-old (21.7%), and toes the most common area attacked (52.7%). Most (86.6%) patients were admitted within 6 hours after the accident/bite, with a predominance of mild cases (64.6%). The annual occurrence in Paraíba was 5.5 accidents/100,000 inhabitants and lethality was 0.2%. Positive changes in the profiles of these accidents were verified, such as the non-application of inadequate solutions, including the use of tourniquet, coffee grounds, garlic, suction and/or cutting the bitten area. Moreover, the Itinerant Laboratory project, linked to Paraíba State University in partnership with Ceatox-CG, has contributed positively, providing several cities of the state with information regarding the prevention of accidents involving venomous animals. The local press has also contributed, reporting the educational work developed by the centers.

Modeling of in-vessel fission product release including fuel morphology effects for severe accident analyses

International Nuclear Information System (INIS)

Suh, K.Y.

1989-10-01

A new in-vessel fission product release model has been developed and implemented to perform best-estimate calculations of realistic source terms including fuel morphology effects. The proposed bulk mass transfer correlation determines the product of fission product release and equiaxed grain size as a function of the inverse fuel temperature. The model accounts for the fuel-cladding interaction over the temperature range between 770 K and 3000 K in the steam environment. A separate driver has been developed for the in-vessel thermal hydraulic and fission product behavior models that were developed by the Department of Energy for the Modular Accident Analysis Package (MAAP). Calculational results of these models have been compared to the results of the Power Burst Facility Severe Fuel Damage tests. The code predictions utilizing the mass transfer correlation agreed with the experimentally determined fractional release rates during the course of the heatup, power hold, and cooldown phases of the high temperature transients. Compared to such conventional literature correlations as the steam oxidation model and the NUREG-0956 correlation, the mass transfer correlation resulted in lower and less rapid releases in closer agreement with the on-line and grab sample data from the Severe Fuel Damage tests. The proposed mass transfer correlation can be applied for best-estimate calculations of fission products release from the UO 2 fuel in both nominal and severe accident conditions. 15 refs., 10 figs., 2 tabs

A tool for safety officers when analysing the basic causes of simple accidents

DEFF Research Database (Denmark)

Jørgensen, Kirsten

Most accidents that happen in enterprises are simple and seldom have serious invalidating consequences. Very often these kinds of accident are not investigated and if they are, then the investigation is very brief, with comments such as that it was the victim’s own fault or just an unlucky...... for some years with interesting results. Both the difficulties and the benefits will be presented, together with examples of the use of the tool. The main purpose of the tool is to demonstrate how management and workers can get a much better understanding of why accidents happen, even those accidents...... that seem to be unavoidable, and that simple accidents never are simple, but always have root causes on which preventive action can be focused....

Radiation doses in accidents at sea-transportation of spent fuel

International Nuclear Information System (INIS)

Appelgren, A.; Bergstroem, U.; Devell, L.

1978-01-01

In order to investigate the consequences of shipping accidents, a release of activity is assumed. This report presents the calculations of individual and collective doses from the two most severe postulated accidents which are given in a special accident analysis. One of the accidents is a ship collision together with fire on-board, the ship is floating after the collision and a certain quantity volatile fission products gives airborne activity. In the other case, it is a fire on-board, the ship will sink and cause a certain leakage to the sea

Cause-effect analysis on Fukushima accident reports. What did McMaster undergraduate students learn?

International Nuclear Information System (INIS)

Nagasaki, Shinya

2016-01-01

In the ENG PHYS 4ES3 Course “Special Topics in Energy Systems (2014-2015)” in McMaster University, sixteen 4th-year undergraduate students studied the Fukushima accident, discussed the causes of accident and its impacts on the energy systems from the sustainability point of view, made the oral presentation and submitted the reports. In this paper, a cause-effect and causal-loop analysis was applied to the discussion in the reports, the diagram of cause-effect relationship was drawn, and the important problems were extracted from the diagram. It was found that the important problems and the diagram of cause-effect relationship McMaster undergraduate students considered were similar to the essential problems and the diagram Horii pointed out, although Interim Report of the Investigation Committee on the Accident at Fukushima Nuclear Stations of Tokyo Electric Power Company which Horii used was not adopted in the reports submitted by students. (author)

Probabilistic Approach to Conditional Probability of Release of Hazardous Materials from Railroad Tank Cars during Accidents

Science.gov (United States)

2009-10-13

This paper describes a probabilistic approach to estimate the conditional probability of release of hazardous materials from railroad tank cars during train accidents. Monte Carlo methods are used in developing a probabilistic model to simulate head ...

BACFIRE, Minimal Cut Sets Common Cause Failure Fault Tree Analysis

International Nuclear Information System (INIS)

Fussell, J.B.

1983-01-01

1 - Description of problem or function: BACFIRE, designed to aid in common cause failure analysis, searches among the basic events of a minimal cut set of the system logic model for common potential causes of failure. The potential cause of failure is called a qualitative failure characteristics. The algorithm searches qualitative failure characteristics (that are part of the program input) of the basic events contained in a set to find those characteristics common to all basic events. This search is repeated for all cut sets input to the program. Common cause failure analysis is thereby performed without inclusion of secondary failure in the system logic model. By using BACFIRE, a common cause failure analysis can be added to an existing system safety and reliability analysis. 2 - Method of solution: BACFIRE searches the qualitative failure characteristics of the basic events contained in the fault tree minimal cut set to find those characteristics common to all basic events by either of two criteria. The first criterion can be met if all the basic events in a minimal cut set are associated by a condition which alone may increase the probability of multiple component malfunction. The second criterion is met if all the basic events in a minimal cut set are susceptible to the same secondary failure cause and are located in the same domain for that cause of secondary failure. 3 - Restrictions on the complexity of the problem - Maxima of: 1001 secondary failure maps, 101 basic events, 10 cut sets

Convention on assistance in the case of a nuclear accident or radiological emergency

International Nuclear Information System (INIS)

1986-11-01

The full text of the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency adopted by the General Conference at its special session from 24-26 September 1986 is presented. It is stipulated that the States Parties shall cooperate between themselves and with the Agency to facilitate prompt assistance in the event of a nuclear accident or radiological emergency to minimize its consequences and to protect life, the property and the environment from the effects of radioactive releases

Investigation of Qom Rural Area Water Network Accident in 2010 and Minimization Approaches of Accident Frequencies

Directory of Open Access Journals (Sweden)

Hossein Jafari Mansoorian

2016-02-01

Full Text Available Background & Aims of the Study : Accidents in water networks can lead to increase the uncounted water, costs of repair, maintenance, restoration and enter water contaminants to water network. The aim of this study is to survey the accidents of Qom rural water network and choose the right approaches to reduce the number of accidents. Materials & Methods: In this cross-sectional study, four sector of Qom province (Markazi, Dastjerd, Kahak and Qahan, were assessed over a period of 8 months (July – January 2010. This study was conducted through questionnaire of Ministry of Energy. Results: The total number of accidents was 763. The highest number of accidents in the four sectors was related to Markazi sector with 228 accidents. According to the time of the accident, the highest and lowest number of accident was related to September (19.7% and November (6.8%, respectively. According to the location of the accident on network, the highest and lowest number of accident was related to distribution network (64% and connections (17.5% and transmission pipe (18.34%, respectively. According to the type of the accident, the highest and lowest number of accident was related to breaking (47.8% and gasket failure (1.2%, respectively. Considering with the pipes’ material, the highest and lowest number of accident was related to polyethylene pipes (93% and steel and cast iron pipes (0.5%, 0.5%, respectively. Conclusions: Due to the high break rate of Polyethylene pipes, it is recommended to be placed in priority of leak detection and rehabilitation.   .

A model for the release, dispersion and environmental impact of a postulated reactor accident from a submerged commercial nuclear power plant

Science.gov (United States)

Bertch, Timothy Creston

1998-12-01

Nuclear power plants are inherently suitable for submerged applications and could provide power to the shore power grid or support future underwater applications. The technology exists today and the construction of a submerged commercial nuclear power plant may become desirable. A submerged reactor is safer to humans because the infinite supply of water for heat removal, particulate retention in the water column, sedimentation to the ocean floor and inherent shielding of the aquatic environment would significantly mitigate the effects of a reactor accident. A better understanding of reactor operation in this new environment is required to quantify the radioecological impact and to determine the suitability of this concept. The impact of release to the environment from a severe reactor accident is a new aspect of the field of marine radioecology. Current efforts have been centered on radioecological impacts of nuclear waste disposal, nuclear weapons testing fallout and shore nuclear plant discharges. This dissertation examines the environmental impact of a severe reactor accident in a submerged commercial nuclear power plant, modeling a postulated site on the Atlantic continental shelf adjacent to the United States. This effort models the effects of geography, decay, particle transport/dispersion, bioaccumulation and elimination with associated dose commitment. The use of a source term equivalent to the release from Chernobyl allows comparison between the impacts of that accident and the postulated submerged commercial reactor plant accident. All input parameters are evaluated using sensitivity analysis. The effect of the release on marine biota is determined. Study of the pathways to humans from gaseous radionuclides, consumption of contaminated marine biota and direct exposure as contaminated water reaches the shoreline is conducted. The model developed by this effort predicts a significant mitigation of the radioecological impact of the reactor accident release

On high-temperature reactor accident topology

International Nuclear Information System (INIS)

Fassbender, J.; Kroeger, W.; Wolters, J.

1981-01-01

American and German risk studies for an HTGR and independent investigations of hypothetical accident sequences led to a fundamental understanding of the topology of HTGR accident sequences. The dominating importance of core heat-up accidents was confirmed and the initiating events were identified. Complications of core heat-up accidents by air or water ingress are of minor importance for the risk, whereas the long-term development of accidents during days and weeks plays an important role for the environmental impact. The risk caused by an HTGR at a German site cannot yet be determined exactly, because no modern German HTGR design has passed a licensing procedure. Cautious estimates show that risk will appear to be substantially smaller than the LWR risk. The main reasons are the considerably reduced release of fission procucts and the slow development of core heat-up accidents leaving much time for measures which reduce the risk. (orig.) [de

Monte Carlo simulation of single accident airport risk profile

Science.gov (United States)

1979-01-01

A computer simulation model was developed for estimating the potential economic impacts of a carbon fiber release upon facilities within an 80 kilometer radius of a major airport. The model simulated the possible range of release conditions and the resulting dispersion of the carbon fibers. Each iteration of the model generated a specific release scenario, which would cause a specific amount of dollar loss to the surrounding community. By repeated iterations, a risk profile was generated, showing the probability distribution of losses from one accident. Using accident probability estimates, the risks profile for annual losses was derived. The mechanics are described of the simulation model, the required input data, and the risk profiles generated for the 26 large hub airports.

Coal Mine Accidents in Bangladesh: Its Causes and Remedial Measures

Directory of Open Access Journals (Sweden)

MD. MINHAJ UDDIN MONIR

2012-12-01

Full Text Available Barapukuria coal mine (BCM is located at Dinajpur district, NW Bangladesh. Total area is about 6.68 km2 and coal was encountered at a depth ranging between 118 and 509 m. Six major coal seams (seam I to seam VI were identified at BCM, of which, thickest one is the seam-VI (~36 m. The estimated coal reserves is about 390 million tons and of this, nearly 64 million tons of coal is extractable. The annual production of coal is about 1 million ton. In this study several parameters were used to explore minimization of accidents and improvement of coal production in BCM. Considering the geological, hydrological and other technical parameters, longwall mining method is applied for extraction of coal. Longwall retreating mining method is also applied for extraction of coal from single face with the operational area protected by self-advancing hydraulic powered roof support (HPRS system. These supports are moved forward causing the roof behind them to form an extensive abandoned area named goaf, which may lead to collapse with air blast. Coal in BCM is extracted from seam VI, using a multislice Longwall top coal caving method. Average ventilated air composition is ~20.94% oxygen, ~79.00% nitrogen, ~0.04% carbon monoxide, and minor water steam with huge dust. Production of coal was completed from 12 Longwall faces of 1st slice from seam VI. During production period several accidents and troubles within BCM have occurred. Poisonous gases such as carbon monoxide were detected during/after development of 1110 Longwall face, which increases up to 6000 ppm, therefore, sealed-off the face with mining equipments. During the development of belt gate roadway of 1101 Longwall face, maximum temperature and humidity increases up to 37 oC and 100%, respectively. Miners of BCM experienced some difficulties to work in that adverse environment. Air return roadway temperature was always 40 to 41oC in 1101 Longwall face during production period, faces temperature 46o

A methodology for the transfer of probabilities between accident severity categories

International Nuclear Information System (INIS)

Whitlow, J.D.; Neuhauser, K.S.

1992-01-01

Evaluation of the radiological risks of accidents involving vehicles transporting radioactive materials requires consideration of both accident probability and consequences. The probability that an accident will occur may be estimated from historical accident data for the given mode of transport. In addition to an overall accident rate, information regarding accident severity and the resulting package environments across the range of all credible accidents is needed to determine the potential for a release of radioactive material from the package or for an increase in direct radiation from the package caused by damage to packaging shielding. This information is usually obtained from a variety of sources such as historical data, experimental data, analyses of accident and package environments, and expert opinion. The consequences of an accident depend on a number of factors including the type, quantity, and physical form of radioactive material being transported; the response of the package to accident environments; the fraction of material released from the package; and the dispersion of any released material. One approach for the classification and treatment of transportation accidents in risk analysis divides the complete range of critical accident environments resulting from all credible accidents into some number of accident-severity categories. The types of accident environments that a package may be subjected to in transportation are often classified into the following five groups: impact, fire, crush, puncture, and immersion. A open-quotes criticalclose quotes accident environment is one of a type that could present a plausible threat to a package. Each severity category represents a portion of all credible accidents, and the total of all severity categories covers the complete range of critical accident environments. This approach is used in the risk assessment codes RADTRAN (Neuhauser and Kanipe 1992) and INTERTRAN (Ericsson and Elert 1983)

The total release of xenon-133 from the Fukushima Dai-ichi nuclear power plant accident

International Nuclear Information System (INIS)

Stohl, Andreas; Seibert, Petra; Wotawa, Gerhard

2012-01-01

The accident at the Fukushima Dai-ichi nuclear power plant (FD-NPP) on 11 March 2011 released large amounts of radioactivity into the atmosphere. We determine the total emission of the noble gas xenon-133 ( 133 Xe) using global atmospheric concentration measurements. For estimating the emissions, we used three different methods: (i) using a purely observation-based multi-box model, (ii) comparisons of dispersion model results driven with GFS meteorological data with the observation data, and (iii) such comparisons with the dispersion model driven by ECMWF data. From these three methods, we have obtained total 133 Xe releases from FD-NPP of (i) 16.7 ± 1.9 EBq, (ii) 14.2 ± 0.8 EBq, and (iii) 19.0 ± 3.4 EBq, respectively. These values are substantially larger than the entire 133 Xe inventory of FD-NPP of about 12.2 EBq derived from calculations of nuclear fuel burn-up. Complete release of the entire 133 Xe inventory of FD-NPP and additional release of 133 Xe due to the decay of iodine-133 ( 133 I), which can add another 2 EBq to the 133 Xe FD-NPP inventory, is required to explain the atmospheric observations. Two of our three methods indicate even higher emissions, but this may not be a robust finding given the differences between our estimates. - Highlights: ► We determine the total release of xenon-133 from the Fukushima nuclear accident. ► We used global measurements and a box model, as well as dispersion model estimates. ► Total 133 Xe release is about 14.2-19 EBq, more than Fukushima 133 Xe inventory. ► Additional release of iodine-133 and decay into 133 Xe needed to explain results.

Conceptual Design of Portable Filtered Air Suction Systems For Prevention of Released Radioactive Gas under Severe Accidents of NPP

Energy Technology Data Exchange (ETDEWEB)

Gu, Beom W.; Choi, Su Y.; Yim, Man S.; Rim, Chun T. [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2014-05-15

It becomes evident that severe accidents may occur by unexpected disasters such as tsunami, heavy flood, or terror. Once radioactive material is released from NPP through severe accidents, there are no ways to prevent the released radioactive gas spreading in the air. As a remedy for this problem, the idea on the portable filtered air suction system (PoFASS) for the prevention of released radioactive gas under severe accidents was proposed. In this paper, the conceptual design of a PoFASS focusing on the number of robot fingers and robot arm rods are proposed. In order to design a flexible robot suction nozzle, mathematical models for the gaps which represent the lifted heights of extensible covers for given convex shapes of pipes and for the covered areas are developed. In addition, the system requirements for the design of the robot arms of PoFASS are proposed, which determine the accessible range of leakage points of released radioactive gas. In this paper, the conceptual designs of the flexible robot suction nozzle and robot arm have been conducted. As a result, the minimum number of robot fingers and robot arm rods are defined to be four and three, respectively. For further works, extensible cover designs on the flexible robot suction nozzle and the application of the PoFASS to the inside of NPP should be studied because the radioactive gas may be released from connection pipes between the containment building and auxiliary buildings.

Root cause analysis of JCO accident based on decision-making model

International Nuclear Information System (INIS)

Kohda, Takehisa; Inoue, Koichi; Nojiri, Yoshihiko

2000-01-01

This paper discusses root causes of the JCO accident by considering the reasons why the workers made their decision to choose the illegal actions leading to a criticality accident. Analyzing their decision process compared with the normal decision process, the direct cause of their incorrect decision is estimated to be the lack of knowledge about the danger of nuclear materials and the criticality. Further, the lack of knowledge is considered to be due to organizational or environmental factors such as (a) the ignorance of safety by the overall JCO company which pursued low costs and high profit, (b) the JCO's custom and practice of modifying operational rules without permission, and (c) the JCO's inappropriate training or education where the criticality or its danger was not taught. All these background factors are related to the overconfidence of plant safety, a false trust that such a criticality accident will never occur at the plant. Since the recognition of the danger or risk of a system is considered to be the starting point for its safety management and operation, all information about the danger and safety should be correctly communicated to everyone related to the system. (author)

MELCOR assessment of sequential severe accident mitigation actions under SGTR accident

International Nuclear Information System (INIS)

Choi, Wonjun; Jeon, Joongoo; Kim, Nam Kyung; Kim, Sung Joong

2017-01-01

The representative example of the severe accident studies using the severe accident code is investigation of effectiveness of developed severe accident management (SAM) strategy considering the positive and adverse effects. In Korea, some numerical studies were performed to investigate the SAM strategy using various severe accident codes. Seo et.al performed validation of RCS depressurization strategy and investigated the effect of severe accident management guidance (SAMG) entry condition under small break loss of coolant accident (SBLOCA) without safety injection (SI), station blackout (SBO), and total loss of feed water (TLOFW) scenarios. The SGTR accident with the sequential mitigation actions according to the flow chart of SAMG was simulated by the MELCOR 1.8.6 code. Three scenariospreventing the RPV failure were investigated in terms of fission product release, hydrogen risk, and the containment pressure. Major conclusions can be summarized as follows: (1) According to the flow chart of SAMG, RPV failure can be prevented depending on the method of RCS depressurization. (2) To reduce the release of fission product during the injecting into SGs, a temporary opening of SDS before the injecting into SGs was suggested. These modified sequences of mitigation actions can reduce the release of fission product and the adverse effect of SDS.

Investigation report on causes of radiation underexposure accident at Yamagata University Hospital and Prevention of Similar accident

International Nuclear Information System (INIS)

2005-01-01

The accident in the title was announced on February 18, 2004 by the hospital, which asked its investigation immediately. The group based on 4 academic societies concerned, thereby started investigations of the in-house reports on the accident and of subsequent hospital visit in March, which involved hearing from personnel concerned, physical/technological examinations and clinical evaluation, with respect to the hospital system for radiation treatment, flow of the treatment, accident details, estimation of the actual expose dose and classification of patients. The investigational group found for the actual number of patients underexposed to be 36 (63, in the in-house report) in 1,377. The cause of the accident was thought essentially the input error for the correct power coefficient 1.032 to be a wrong one 1.320 for 15 x 15 cm 4 MV X-ray. The error had been overlooked by the contract operator from the introduction of the treatment planning equipment in 1999. For prevention, setting up of quality assurance (QA) program by the hospital, the user itself, was pointed out necessary. Making the guideline for introducing the new equipment was conceivably an important work of the trader. (N.I.)

Epidemiology of road traffic accidents in adults. A systematic review

Directory of Open Access Journals (Sweden)

Krzysztof Goniewicz

2017-07-01

Full Text Available Road accidents are a serious problem of the modern world. They are one of the main causes of injuries and are the third most numerous cause of death. Every year, about one million people, adults and children, die on the roads and several millions are injured. Mortality rate due to injuries from road accidents amounts to 2,2% of all deaths in the world. The research presents a mechanism of traffic accidents, pathophysiology of injury, partition of car accidents and characterized the insults of victims in various types of automobile accidents. Injuries resulting from road accidents have numerous substantial consequences as they are related with releasing large amounts of kinetic energy which must be absorbed. Kinetic energy absorbing is the basic mechanism of injury arising during road accidents. In apprising an automobile accident should take into consideration the type of the car accident and the extent of damage to the vehicle People participating in road accidents of high energy are especially endangered with substantial injuries. There is a close relationship between the rate of vehicle damages and seriousness of casualties' injuries.

Analytics of Radioactive Materials Released in the Fukushima Daiichi Nuclear Accident

Energy Technology Data Exchange (ETDEWEB)

Egarievwe, Stephen U. [Nuclear Engineering and Radiological Science Center, Alabama A and M University, Huntsville, AL (United States); Nuclear Engineering Department, University of Tennessee, Knoxville, TN (United States); Coble, Jamie B.; Miller, Laurence F. [Nuclear Engineering Department, University of Tennessee, Knoxville, TN (United States)

2015-07-01

The 2011 Fukushima Daiichi nuclear accident in Japan resulted in the release of radioactive materials into the atmosphere, the nearby sea, and the surrounding land. Following the accident, several meteorological models were used to predict the transport of the radioactive materials to other continents such as North America and Europe. Also of high importance is the dispersion of radioactive materials locally and within Japan. Based on the International Atomic Energy Agency (IAEA) Convention on Early Notification of a nuclear accident, several radiological data sets were collected on the accident by the Japanese authorities. Among the radioactive materials monitored, are I-131 and Cs-137 which form the major contributions to the contamination of drinking water. The radiation dose in the atmosphere was also measured. It is impractical to measure contamination and radiation dose in every place of interest. Therefore, modeling helps to predict contamination and radiation dose. Some modeling studies that have been reported in the literature include the simulation of transport and deposition of I-131 and Cs-137 from the accident, Cs-137 deposition and contamination of Japanese soils, and preliminary estimates of I-131 and Cs-137 discharged from the plant into the atmosphere. In this paper, we present statistical analytics of I-131 and Cs-137 with the goal of predicting gamma dose from the Fukushima Daiichi nuclear accident. The data sets used in our study were collected from the IAEA Fukushima Monitoring Database. As part of this study, we investigated several regression models to find the best algorithm for modeling the gamma dose. The modeling techniques used in our study include linear regression, principal component regression (PCR), partial least square (PLS) regression, and ridge regression. Our preliminary results on the first set of data showed that the linear regression model with one variable was the best with a root mean square error of 0.0133 μSv/h, compared

Analytics of Radioactive Materials Released in the Fukushima Daiichi Nuclear Accident

International Nuclear Information System (INIS)

Egarievwe, Stephen U.; Coble, Jamie B.; Miller, Laurence F.

2015-01-01

The 2011 Fukushima Daiichi nuclear accident in Japan resulted in the release of radioactive materials into the atmosphere, the nearby sea, and the surrounding land. Following the accident, several meteorological models were used to predict the transport of the radioactive materials to other continents such as North America and Europe. Also of high importance is the dispersion of radioactive materials locally and within Japan. Based on the International Atomic Energy Agency (IAEA) Convention on Early Notification of a nuclear accident, several radiological data sets were collected on the accident by the Japanese authorities. Among the radioactive materials monitored, are I-131 and Cs-137 which form the major contributions to the contamination of drinking water. The radiation dose in the atmosphere was also measured. It is impractical to measure contamination and radiation dose in every place of interest. Therefore, modeling helps to predict contamination and radiation dose. Some modeling studies that have been reported in the literature include the simulation of transport and deposition of I-131 and Cs-137 from the accident, Cs-137 deposition and contamination of Japanese soils, and preliminary estimates of I-131 and Cs-137 discharged from the plant into the atmosphere. In this paper, we present statistical analytics of I-131 and Cs-137 with the goal of predicting gamma dose from the Fukushima Daiichi nuclear accident. The data sets used in our study were collected from the IAEA Fukushima Monitoring Database. As part of this study, we investigated several regression models to find the best algorithm for modeling the gamma dose. The modeling techniques used in our study include linear regression, principal component regression (PCR), partial least square (PLS) regression, and ridge regression. Our preliminary results on the first set of data showed that the linear regression model with one variable was the best with a root mean square error of 0.0133 μSv/h, compared

Risk factors for automobile accidents caused by falling asleep while driving in obstructive sleep apnea syndrome.

Science.gov (United States)

Arita, Aki; Sasanabe, Ryujiro; Hasegawa, Rika; Nomura, Atsuhiko; Hori, Reiko; Mano, Mamiko; Konishi, Noriyuki; Shiomi, Toshiaki

2015-12-01

We examined the risk factors for automobile accidents caused by falling asleep while driving in subjects with obstructive sleep apnea syndrome (OSAS). We asked licensed drivers with history of snoring and excessive daytime sleepiness who had undergone polysomnography (PSG) at the Department of Sleep Medicine/Sleep Disorders Center at Aichi Medical University Hospital to complete the questionnaires on accidents caused by falling asleep while driving. As a subjective measure of sleepiness, we used the Epworth sleepiness scale (ESS). Based on PSG results, 2387 subjects diagnosed with OSAS were divided into three groups according to apnea-hypopnea index (AHI): mild-to-moderate (5 ≤ AHI accidents in the past 5 years due to falling asleep. Our multivariate analysis suggests that scores on the ESS and patient-reported frequency of feeling drowsy while regular driving and working are related to automobile accidents caused by falling asleep while driving.

Analytical measurements of fission products during a severe nuclear accident

Science.gov (United States)

Doizi, D.; Reymond la Ruinaz, S.; Haykal, I.; Manceron, L.; Perrin, A.; Boudon, V.; Vander Auwera, J.; tchana, F. Kwabia; Faye, M.

2018-01-01

The Fukushima accident emphasized the fact that ways to monitor in real time the evolution of a nuclear reactor during a severe accident remain to be developed. No fission products were monitored during twelve days; only dose rates were measured, which is not sufficient to carry out an online diagnosis of the event. The first measurements were announced with little reliability for low volatile fission products. In order to improve the safety of nuclear plants and minimize the industrial, ecological and health consequences of a severe accident, it is necessary to develop new reliable measurement systems, operating at the earliest and closest to the emission source of fission products. Through the French program ANR « Projet d'Investissement d'Avenir », the aim of the DECA-PF project (diagnosis of core degradation from fission products measurements) is to monitor in real time the release of the major fission products (krypton, xenon, gaseous forms of iodine and ruthenium) outside the nuclear reactor containment. These products are released at different times during a nuclear accident and at different states of the nuclear core degradation. Thus, monitoring these fission products gives information on the situation inside the containment and helps to apply the Severe Accident Management procedures. Analytical techniques have been proposed and evaluated. The results are discussed here.

Analytical measurements of fission products during a severe nuclear accident

Directory of Open Access Journals (Sweden)

Doizi D.

2018-01-01

Full Text Available The Fukushima accident emphasized the fact that ways to monitor in real time the evolution of a nuclear reactor during a severe accident remain to be developed. No fission products were monitored during twelve days; only dose rates were measured, which is not sufficient to carry out an online diagnosis of the event. The first measurements were announced with little reliability for low volatile fission products. In order to improve the safety of nuclear plants and minimize the industrial, ecological and health consequences of a severe accident, it is necessary to develop new reliable measurement systems, operating at the earliest and closest to the emission source of fission products. Through the French program ANR « Projet d’Investissement d’Avenir », the aim of the DECA-PF project (diagnosis of core degradation from fission products measurements is to monitor in real time the release of the major fission products (krypton, xenon, gaseous forms of iodine and ruthenium outside the nuclear reactor containment. These products are released at different times during a nuclear accident and at different states of the nuclear core degradation. Thus, monitoring these fission products gives information on the situation inside the containment and helps to apply the Severe Accident Management procedures. Analytical techniques have been proposed and evaluated. The results are discussed here.

Consequence Analysis of Release from KN-18 Cask during a Severe Transportation Accident

International Nuclear Information System (INIS)

Lim, Heoksoon; Bhang, Giin; Na, Janghwan; Ban, Jaeha; Kim, Myungsu

2015-01-01

Korea Hydro and Nuclear Power (KHNP) has launched a project entitled 'Development of APR1400 Physical Protection System Design' and conducting a new conceptual physical protection system(PPS) design. One of mayor contents is consequence analysis for spent nuclear fuel cask. Proper design of physical protection system for facilities and storage and transformation involving nuclear and radioactive material requires the quantification of potential consequence from prescribed sabotage and theft scenarios in order to properly understand the level of PPS needed for specific facilities and materials. An important aspect of the regulation of the nuclear industry is assessing the risk to the public and the environment from a release of radioactive material produced by accidental or intentional scenarios. This paper describes the consequence analysis methodology, structural analysis for KN-18 cask and results of release from the cask during a severe transportation accident. Accident during spent fuel cask transportation was numerically calculated for KN-18, and showed the integrity of the fuel assemblies and cask itself was unharmed on a scenario that is comparable to state of art NRC research. Even assumption of leakage as a size of 1 x 10''2 mm''2 does not exceed for a certain criteria at any distance

Consequence Analysis of Release from KN-18 Cask during a Severe Transportation Accident

Energy Technology Data Exchange (ETDEWEB)

Lim, Heoksoon; Bhang, Giin; Na, Janghwan; Ban, Jaeha; Kim, Myungsu [KAERI, Daejeon (Korea, Republic of)

2015-05-15

Korea Hydro and Nuclear Power (KHNP) has launched a project entitled 'Development of APR1400 Physical Protection System Design' and conducting a new conceptual physical protection system(PPS) design. One of mayor contents is consequence analysis for spent nuclear fuel cask. Proper design of physical protection system for facilities and storage and transformation involving nuclear and radioactive material requires the quantification of potential consequence from prescribed sabotage and theft scenarios in order to properly understand the level of PPS needed for specific facilities and materials. An important aspect of the regulation of the nuclear industry is assessing the risk to the public and the environment from a release of radioactive material produced by accidental or intentional scenarios. This paper describes the consequence analysis methodology, structural analysis for KN-18 cask and results of release from the cask during a severe transportation accident. Accident during spent fuel cask transportation was numerically calculated for KN-18, and showed the integrity of the fuel assemblies and cask itself was unharmed on a scenario that is comparable to state of art NRC research. Even assumption of leakage as a size of 1 x 10''2 mm''2 does not exceed for a certain criteria at any distance.

Method for consequence calculations for severe accidents

International Nuclear Information System (INIS)

Nielsen, F.

1988-07-01

This report was commissioned by the Swedish State Power Board. The report contains a calculation of radiation doses in the surroundings caused by a theoretical core meltdown accident at Forsmark reactor No 3. The accident sequence chosen for the calculating was a release caused by total power failure. The calculations were made by means of the PLUCON4 code. Meteorological data for two years from the Forsmark meteorological tower were analysed to find representative weather situations. As typical weather, Pasquill D was chosen with a wind speed of 5 m/s, and as extreme weather, Pasquill F with a wind speed of 2 m/s. 23 tabs., 37 ills., 20 refs. (author)

Behaviour of molten reactor fuels under accident conditions

International Nuclear Information System (INIS)

Xavier Swamikannu, A.; Mathews, C.K.

1980-01-01

The behaviour of molten reactor fuels under accident conditions has received considerable importance in recent times. The chemical processes that occur in the molten state among the fuel, the clad components and the concrete of the containment building under the conditions of a core melt down accident in oxide fuelled reactors have been reviewed with the purpose of identifying areas of developmental work required to be performed to assess and minimize the consequences of such an accident. This includes the computation and estimation of vapour pressure of various gaseous species over the fuel, the clad and the coolant, providing of sacrificial materials in the concrete in order to protect the containment building in order to prevent release of radioactive gases into the atmosphere and understanding the distribution and chemical state of fission products in the molten fuel in order to provide for the effective removal of their decay heats. (auth.)

[Accidents by external causes in adolescents: care in sentinel urgency and emergency services in the Brazilian State Capitals--2009].

Science.gov (United States)

Malta, Deborah Carvalho; Mascarenhas, Márcio Dênis Medeiros; Bernal, Regina Tomie Ivata; Andrade, Silvania Suely Caribé de Araújo; das Neves, Alice Cristina Medeiros; de Melo, Elza Machado; da Silva Junior, Jarbas Barbosa

2012-09-01

Adolescents are seeking new references and experiences, which may involve attitudes of risk and exposure to accidents and violence from external causes. These events constitute a serious Public Health problem. The scope of this study was to analyze the occurrence of accidents by external causes in adolescents from 10 to 19 years of age attended at sentinel urgency and emergency services in Brazil. Data from the 2009 Surveillance System for Violence and Accidents (VIVA 2009) was analyzed in 74 emergency units in 23 state capitals and the Federal District. The findings revealed that 6,434 adolescents (89.8%) were victims of accidents and 730 (10.2 %) were victims of violence. The main causes of the accidents were falls and traffic accidents, and assaults were predominant in violence. For both accidents and violence, non-white male adolescents were predominant and the events occurred most frequently on the public highways. A marked increase was detected, with hospitalization of victims of violence between 15 and 19 years of age. Understanding the epidemiological reality of external causes among adolescents represents an important tool for health prevention and promotion policies and the culture of peace seeking to reduce morbidity and mortality.

Identification and assessment of containment and release management strategies

International Nuclear Information System (INIS)

Lehner, J.R.; Lin, C.C.; Neogy, P.

1990-01-01

Brookhaven National Laboratory, under the auspices of the U.S. Nuclear Regulatory Commission, is investigating accident management strategies which could help preserve containment integrity or minimize releases during a severe accident. The objective is to make use of existing plant systems and equipment in innovative ways to reduce the likelihood of containment failure or to mitigate the release of fission products to the environment if failure cannot be prevented. Many of these strategies would be implemented during the later stages of a severe accident (i.e., after vessel breach) and sizeable uncertainties exist regarding some of the phenomena involved. A majority of the strategies identified go well beyond existing procedures and often depend on the specific containment type. Strategies for all of the five different containments used in the U.S. are being considered: BWR Mark I, Mark II, and Mark III, as well as PWR ice condenser and large dry containments. Accident management strategies related to the in-vessel phase of a severe core melt accident are being dealt with under another NRC program. For each containment type the most likely challenges are identified and existing emergency guidelines and procedures are reviewed as to how they address these challenges

Regulation Plans on Severe Accidents developed by KINS Severe Accident Regulation Preparation TFT

International Nuclear Information System (INIS)

Kim, Kyun Tae; Chung, Ku Young; Na, Han Bee

2016-01-01

Some nuclear power plants in Fukushima Daiichi site had lost their emergency reactor cooling function for long-time so the fuels inside the reactors were molten, and the integrity of containment was damaged. Therefore, large amount of radioactive material was released to environment. Because the social and economic effects of severe accidents are enormous, Korean Government already issued 'Severe Accident Policy' in 2001 which requires nuclear power plant operators to set up 'Quantitative Safety Goal', to do 'Probabilistic Safety Analysis', to install 'Severe Accident Countermeasures' and to make 'Severe Accident Management Plan'. After the Fukushima disaster, a Special Safety Inspection was performed for all operating nuclear power plants of Korea. The inspection team from industry, academia, and research institutes assessed Korean NPPs capabilities to cope with or respond to severe accidents and emergency situation caused by natural disasters such as a large earthquake or tsunami. As a result of the special inspection, about 50 action items were identified to increase the capability to cope with natural disaster and severe accidents. Nuclear Safety Act has been amended to require NPP operators to submit Accident Management Plant as part of operating license application. The KINS Severe Accident Regulation Preparation TFT had first investigated oversea severe accident regulation trend before and after the Fukushima accident. Then, the TFT has developed regulation draft for severe accidents such as Severe accident Management Plans, the required design features for new NPPs to prevent severe accident against multiple failures and beyond-design external events, countermeasures to mitigate severe accident and to keep the integrity of containment, and assessment methodology on safety assessment plan and probabilistic safety assessment

Criticality accident in uranium fuel processing plant. Cause analysis and teachings from a viewpoint of a human factor

International Nuclear Information System (INIS)

Furuta, Kazuo

2000-01-01

On the JCO criticality accident occurred on September 30, 1999, from relatively earlier time since its occurrence it was elucidated that it was formed not by accident and error operation of apparatus and instruments but by unsafe actions of operators beyond regular manual as its direct cause, and that an organizational factor on business managers and safety administration unable to control such unsafe actions of operators at its background. Then, it was judged to be essential to carry out an accident research from a viewpoint of the human factor (HF) for elucidation on essence of the accident, to establish a 'special workshop on the JCO accident research' to investigate elucidation of the accident cause and countermeasure of reoccurrence at a standpoint of HF. As a result, the essential cause of this accident was summarized that safety information such as ideals, information, teachings and so forth necessary for safety management were failed to share among different organizations. As a teaching of this accident, nuclear energy participants must recognize that safety culture is not finished only in specific organization and range but produced by protecting weathering of danger consciousness and effort of mutually exciting and learning by sharing a safety information beyond different organization, range and time. (G.K.)

Errors in accident data, its types, causes and methods of rectification-analysis of the literature.

Science.gov (United States)

Ahmed, Ashar; Sadullah, Ahmad Farhan Mohd; Yahya, Ahmad Shukri

2017-07-29

Most of the decisions taken to improve road safety are based on accident data, which makes it the back bone of any country's road safety system. Errors in this data will lead to misidentification of black spots and hazardous road segments, projection of false estimates pertinent to accidents and fatality rates, and detection of wrong parameters responsible for accident occurrence, thereby making the entire road safety exercise ineffective. Its extent varies from country to country depending upon various factors. Knowing the type of error in the accident data and the factors causing it enables the application of the correct method for its rectification. Therefore there is a need for a systematic literature review that addresses the topic at a global level. This paper fulfils the above research gap by providing a synthesis of literature for the different types of errors found in the accident data of 46 countries across the six regions of the world. The errors are classified and discussed with respect to each type and analysed with respect to income level; assessment with regard to the magnitude for each type is provided; followed by the different causes that result in their occurrence, and the various methods used to address each type of error. Among high-income countries the extent of error in reporting slight, severe, non-fatal and fatal injury accidents varied between 39-82%, 16-52%, 12-84%, and 0-31% respectively. For middle-income countries the error for the same categories varied between 93-98%, 32.5-96%, 34-99% and 0.5-89.5% respectively. The only four studies available for low-income countries showed that the error in reporting non-fatal and fatal accidents varied between 69-80% and 0-61% respectively. The logistic relation of error in accident data reporting, dichotomised at 50%, indicated that as the income level of a country increases the probability of having less error in accident data also increases. Average error in recording information related to the

The Chernobyl-4 Reactor and the possible causes of the accident

International Nuclear Information System (INIS)

Motte, F.

1986-01-01

A description and information about the Chernobyl nuclear reactor is given. Some comparison elements between the RBMK reactor type and GCR, CANDU, SGHWR and Hanford N reactor types are presented. A scenario of the possible causes of the accident is discussed. (A.F.)

Causes of road traffic accidents in Juba | Cham | South Sudan ...

African Journals Online (AJOL)

Drivers of private vehicles caused most accidents (37%). Most drivers (46%) were aged 20-30 years. RTAs occurred most often on city roads (89.83%). Conclusion: This leads us to conclude that a comprehensive safety system is needed that are premised on the idea of community-based awareness of traffic rules and safety ...

Motorcycle accident is the main cause of maxillofacial injuries in the Penang Mainland, Malaysia.

Science.gov (United States)

Hashim, Hasnah; Iqbal, Syed

2011-02-01

Maxillofacial injuries are among the commonest forms of body injuries. There are three divisions, namely, facial bone fractures, soft tissue injuries, and dentoalveolar injuries. Etiologies include motor vehicle accidents, assaults, falls, and sporting injuries. The aim of this study was to determine the profiles including the causes of maxillofacial injuries seen in an urban government hospital in the mainland of Penang State, Malaysia. This was a cross-sectional study that recruited cases reported within a period of 1 year. The source population was maxillofacial injury patients presenting to the Oral and Maxillofacial Surgery Department of an urban hospital in the Penang Mainland, North Malaysia between May 2007 and May 2008. Cases of patients involved in accidents that occurred outside the reference vicinity were excluded. A case report form was developed and completed by the attending clinicians. Data were analyzed using spss version 12.0. A total of 194 cases were studied, with the mean patient age being 27.8 (SD 15.20) years. The majority of patients were Malay men between 20 and 29 years of age. The main cause of injury was motorcycle accident (53.6%). The commonest injury (in isolation/combination with other injuries) involved the soft tissues (87.2%), dentoalveolar region (33.4%), and facial bones (23.9%). Laceration was the commonest soft tissue injury, and crown fracture was the most frequent dentoalveolar injury. The facial bone that was most highly involved in the injury was the zygoma. Subjects involved in motorcycle accidents had a significantly higher incidence of sustaining facial bone fractures. Motorcycle accidents were the commonest cause of maxillofacial injuries in the Penang Mainland, Malaysia. Most patients were young men. Hence, it is prudent to reinforce appropriate road safety and awareness interventions particularly focusing young male motorcyclists so as to reduce the risk of accidents. © 2011 John Wiley & Sons A/S.

Severe accidents and terrorist threats at nuclear reactors

International Nuclear Information System (INIS)

Pollack, G.L.

1987-01-01

Some of the key areas of uncertainty are the nature of the physical and chemical interactions of released fission products and of the interactions between a molten core and concrete, the completeness and validity of the computer codes used to predict accidents, and the behavior of the containment. Because of these and other uncertainties, it is not yet possible to reliably predict the consequences of reactor accidents. It is known that for many accident scenarios, especially less severe ones or where the containment is not seriously compromised, the amount of radioactive material expected to escape the reactor is less, even much less, than was previously calculated. For such accidents, the predictions are easier and more reliable. With severe accidents, however, there is considerable uncertainty as to the predicted results. For accidents of the type that terrorists might cause - for example, where the sequence of failure would be unexpected or where redundant safety features are caused to fail together - the uncertainties are still larger. The conclusion, then, is that there are potential dangers to the public from terrorist actions at a nuclear reactor; however, because of the variety of potential terrorist threats and the incompleteness of the knowledge about the behavior of reactor components and fission products during accidents, the consequences cannot yet be assessed quantitatively

Remark on the Causes of Traffic Accidents and Traffic Awareness: Examples of Usak Province

Directory of Open Access Journals (Sweden)

Ercan ÖZEN

2014-01-01

Full Text Available Traffic accidents cause important losses on the social and economics structure of countries. While economic losses are able to be compensated in a short time, it isn’t possible to compensate social and communal losses. This study tackles with not the economic aspect of traffic accidents but the social dimension, evaluates the causes of the traffic accidents with respect to views of individuals on traffic and aims to measure the levels of awareness of individuals about traffic. To achieve these goals, a group of 506 people were surveyed in Uşak province and the acquired data were analyzed via one-way ANOVA test in SPSS 16 program. According to the analysis results, drivers and pedestrians are considered to have significant flaws in traffic accidents. But alongside this thought, the idea that traffic accidents are caused by the road having technical and physical problems has come to the fore. This results present a valid motive for the established approach “Vision Zero” , being practised in Sweden, to be adopted in Turkey. When the level of awareness about traffic is examined, it is seen that individuals generally have got inadequate information related traffic rules and traffic authorities. Besides, the fact that individuals are inadequate in terms of courtesy and respect in traffic and that more serious efforts on traffic education is needed to be spent come out as the important findings of this study. The findings of this study can be thought as a directive tool to the policy makers.

Radionuclide Release after LBLOCA with Loss of Class IV Power Accident in CANDU-6 Plant

Energy Technology Data Exchange (ETDEWEB)

Choi, Hoon [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2011-10-15

A large break in a pipe train of a primary heat transport system discharges coolant, which has high energy and large mass, into the containment building. Reactor shutdown and emergency core cooling water will limit the fuel cladding failure, but cannot prevent it entirely. The containment building is the last barrier of radionuclide release to the environment. Containment isolation and pressure suppression by dousing and local air cooler reduce the amount of radionuclide release to the environment. The objective of containment behavior analysis for large break loss of coolant with loss of class IV power accident is to assess the amount of radionuclide release to the ambient atmosphere. Radionuclide release rates in this event, with all safety system available, that is, the containment building is intact, as well as with containment system impairment, are analyzed with GOTHIC and SMART code

Wound infection caused by Lichtheimia ramosa due to a car accident

NARCIS (Netherlands)

Bibashi, Evangelia; de Hoog, G Sybren; Pavlidis, Theodoros E; Symeonidis, Nikolaos; Sakantamis, Athanasios; Walther, Grit

2012-01-01

A 32-year-old immunocompetent man sustained severe traumas contaminated with organic material due to a car accident. An infection caused by Lichtheimia ramosa at the site of contamination was early diagnosed and cured by multiple surgical debridement and daily cleansing with antiseptic solution

Wound infection caused by Lichtheimia ramosa due to a car accident

NARCIS (Netherlands)

Bibashi, E.; de Hoog, G.S.; Pavlidis, T.E.; Symeonidis, N.; Sakantamis, A.; Walther, G.

2013-01-01

A 32-year-old immunocompetent man sustained severe traumas contaminated with organic material due to a car accident. An infection caused by Lichtheimia ramosa at the site of contamination was early diagnosed and cured by multiple surgical debridement and daily cleansing with antiseptic solution

Preliminary worst-case accident analysis to support the conceptual design of a potential repository in tuff

International Nuclear Information System (INIS)

Jackson, J.L.; Gram, H.F.; Hong, K.J.; Ng, H.S.; Pendergrass, A.M.

1984-01-01

The Nevada Nuclear Waste Storage Investigations (NNWSI) Project is conducting investigations to determine the suitability of a site at Yucca Mountain for development as a high level waste repository. In support of the conceptual design, a preliminary analysis has been performed to identify events that could cause radiological releases from the surface facilities during the operations period. Accidental releases were modeled as short-duration release plumes, dispersed under averaged climatic conditions, using the AIRDOS-EPA code. The consequences of these accidents, in 50-yr integrated dose commitments to operations personnel, to the maximally exposed member of the public, and to the general population in the surrounding area were calculated. The risk to the general public from each event was also assessed. All postulated accidents result in doses to members of the public that are lower than the 0.5 rem/accident limit set by the NRC in 10 CFR 60. For those accidents that do not involve both fire and breach of waste canisters, doses to operations personnel are within the NRC limit for routine operations of 5 rem/yr set in 10 CFR 20. Accidents that involve fire and breach of waste canisters may cause doses to some operations personnel that are in excess of this limit. 18 references, 1 figure, 3 tables

Documentation of Occupational Accidents and Diseases caused by Ionising Radiation

International Nuclear Information System (INIS)

Fehringer, F.; Seitz, G.

2004-01-01

. One of the major goals of the institutions for statutory accident insurance is the prevention of occupational diseases. To perform a successful prevention work it is necessary not only to count the number of accidents or diseases in the various working fields but to look for details of the conditions of work and the human response to those conditions. The institutions for statutory accident insurance have engaged the institution for statutory accident insurance in the precision engineering and electrical industry to carry out documentation, in form of a data bank, for all cases of occupational diseases which could be caused by ionising radiation. Those are not only the cases which are accepted as occupational disease but also the cases where a suspicion of an occupational disease is announced but finally rejected. At the moment about 1700 cases are included in the data bank. For preserving the anonymity information to name and residence are deleted. Various data to one single case are linked by a case-specific key-number. Information to occupation and field of working, to details of a possible exposure to ionising radiation like kind of radiation, time and duration of radiation, exposure of the whole body or of parts of the body and whole body or organ doses are collected. Additional information refers to medical aspects like diagnosis and date of diagnosis. (Author)

Accident at the Chernobyl nuclear power plant, october 1991: facts and causes

International Nuclear Information System (INIS)

Ptashkin, A.V.; Fedorenko, G.M.

2006-01-01

An account is given of the unique accident caused by a spontaneous switching of a 330 kV breaker and a full voltage energizing of the practically stand-still non-excited 500 MW turbine generator N 4 at Chernobyl NPP. The subsequent asynchronous mode of operation resulted in a severe non-reparable damage, hydrogen explosion, fault at the terminals and a fire induced collapse of a machine-hall roof. The analysis has shown that, although the accident was aggravated by a number of casual factors, the main cause of its gravity stems from the ignorance of the probability of a non-sanctioned regime of the asynchronous run of the generator, a mistake committed at the stage of the conceptual development of the typical projects of relay and protection systems of large power blocs

Effect of hypoiodous acid volatility on the iodine source term in reactor accidents

Energy Technology Data Exchange (ETDEWEB)

Routamo, T [Imatran Voima Oy, Vantaa (Finland)

1996-12-01

A FORTRAN code ACT WATCH has been developed to establish an improved understanding of essential radionuclide behaviour mechanisms, especially related to iodine chemistry, in reactor accidents. The accident scenarios calculated in this paper are based on the Loss of Coolant accident at the Loviisa Nuclear Power Plant. The effect of different airborne species, especially HIO, on the iodine source term has been studied. The main cause of the high HIO release in the system modelled is the increase of I{sub 2} hydrolysis rate along with the temperature increase, which accelerates HIO production. Due to the high radiation level near the reactor core, I{sub 2} is produced from I{sup -}very rapidly. High temperature in the reactor coolant causes I{sub 2} to be transformed into HIO and through the boiling of the coolant volatile I{sub 2} and HIO are transferred efficiently into the gas phase. High filtration efficiency for particulate iodine causes I{sup -} release to be much lower than those of I{sub 2} and HIO. (author) 15 figs., 1 tab., refs.

Effect of hypoiodous acid volatility on the iodine source term in reactor accidents

International Nuclear Information System (INIS)

Routamo, T.

1996-01-01

A FORTRAN code ACT WATCH has been developed to establish an improved understanding of essential radionuclide behaviour mechanisms, especially related to iodine chemistry, in reactor accidents. The accident scenarios calculated in this paper are based on the Loss of Coolant accident at the Loviisa Nuclear Power Plant. The effect of different airborne species, especially HIO, on the iodine source term has been studied. The main cause of the high HIO release in the system modelled is the increase of I 2 hydrolysis rate along with the temperature increase, which accelerates HIO production. Due to the high radiation level near the reactor core, I 2 is produced from I - very rapidly. High temperature in the reactor coolant causes I 2 to be transformed into HIO and through the boiling of the coolant volatile I 2 and HIO are transferred efficiently into the gas phase. High filtration efficiency for particulate iodine causes I - release to be much lower than those of I 2 and HIO. (author) 15 figs., 1 tab., refs

Application of RASCAL code for multiunit accident in domestic nuclear sites

Energy Technology Data Exchange (ETDEWEB)

Park, Sang Hyun; Jeong, Seung Young [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2014-10-15

All of domestic nuclear power plant sites are multiunit site (at least 5 - 6 reactors are operating), so this capability has to be quickly secured for nuclear licensee and institutes responsible for nuclear emergency response. In this study, source term and offsite dose from multiunit event were assessed using a computer code, RASCAL. An emergency exercise scenario was chosen to verify applicability of the codes to domestic nuclear site accident. Employing tools and new features of the code, such as merging more than two individual source terms and source term estimate for long term progression accident, main parameters and information in the scenario, release estimates and dose projections were performed. Radiological releases and offsite doses from multiunit accident were calculated using RASCAL.. A scenario, in which three reactors were damaged coincidently by a great natural disaster, was considered. Surrogate plants were chosen for the code calculation. Source terms of each damaged unit were calculated individually first, and then total source term and integrated offsite dose assessment data was acquired using a source term merge function in the code. Also comparison between LTSBO and LOCA source term estimate options was performed. Differences in offsite doses were caused by release characteristics. From LTSBO option, iodines were released much higher than LOCA. Also LTSBO source term release was delayed and the duration was longer than LOCA. This option would be useful to accidents which progress with much longer time frame than LOCA. RASCAL can be useful tool for radiological consequence assessment in domestic nuclear site accidents.

Learning lessons from Natech accidents - the eNATECH accident database

Science.gov (United States)

Krausmann, Elisabeth; Girgin, Serkan

2016-04-01

When natural hazards impact industrial facilities that house or process hazardous materials, fires, explosions and toxic releases can occur. This type of accident is commonly referred to as Natech accident. In order to prevent the recurrence of accidents or to better mitigate their consequences, lessons-learned type studies using available accident data are usually carried out. Through post-accident analysis, conclusions can be drawn on the most common damage and failure modes and hazmat release paths, particularly vulnerable storage and process equipment, and the hazardous materials most commonly involved in these types of accidents. These analyses also lend themselves to identifying technical and organisational risk-reduction measures that require improvement or are missing. Industrial accident databases are commonly used for retrieving sets of Natech accident case histories for further analysis. These databases contain accident data from the open literature, government authorities or in-company sources. The quality of reported information is not uniform and exhibits different levels of detail and accuracy. This is due to the difficulty of finding qualified information sources, especially in situations where accident reporting by the industry or by authorities is not compulsory, e.g. when spill quantities are below the reporting threshold. Data collection has then to rely on voluntary record keeping often by non-experts. The level of detail is particularly non-uniform for Natech accident data depending on whether the consequences of the Natech event were major or minor, and whether comprehensive information was available for reporting. In addition to the reporting bias towards high-consequence events, industrial accident databases frequently lack information on the severity of the triggering natural hazard, as well as on failure modes that led to the hazmat release. This makes it difficult to reconstruct the dynamics of the accident and renders the development of

Dose assessment on natural radiation, natural radionuclide, and artificial radionuclide released by Fukushima nuclear accident

International Nuclear Information System (INIS)

Hosoda, Masahiro; Tokonami, Shinji; Furukawa, Masahide

2012-01-01

Various radionuclides are distributed in environmental materials such as soil, rock, and water. People are exposed every day to natural radiation. According to the UNSCEAR 2008 report, Sources of Ionizing Radiation, natural radiation sources are categorized as terrestrial gamma-rays, radon, cosmic rays and food. The effective dose from radon, thoron and its decay products is about 50% of all natural radiation exposure. Consciousness of the Japanese public toward radiation exposure has significantly increased since the start of the Fukushima Dai-ichi Nuclear Power Station accident. In this paper, the nationwide survey and dose estimation for terrestrial gamma-rays and radon are summarized. External dose from artificial radionuclides released by the Fukushima accident are also reported. (author)

Character and consequence of nuclear criticality accident

International Nuclear Information System (INIS)

Liu Xinhua; Liu Hua; Wu Deqiang; Li Bing

2001-01-01

The author describes some concepts, the process and magnitude of energy release and the destruction of the nuclear criticality accident and also describes the radiation consequence of criticality accidents from three aspects: prompt radiation, contamination in working place and release of fission products to the environment. It shows that the effects of radioactivity release from criticality accidents in the nuclear fuel processing plants on the environment and the public is minor, the main danger is from the external exposure of prompt rays. The paper make as have a correct understanding of the nuclear criticality accident and it would be helpful to take appropriate emergency response to potential criticality accident

Parametric study of radioactive release from a breached containment

International Nuclear Information System (INIS)

Kenigsberg, A.; Hasan, D.; Elias, E.

1980-01-01

A hypothetical accident is analyzed, in which an external (out-of-plant) natural or man-made event causes a loss-of-coolant accident after penetrating the containment wall. The computer codes CONTEMPT and RELAP4 have been used to study the containment thermal-hydraulic behavior during the accident. Results are given in the form of graphs showing the thermal-hydraulic response of the containment and the profile of radioactive release to the atmosphere. The physical model and input data are discussed. 13 refs

Vaporization of low-volatile fission products under severe CANDU reactor accident conditions

International Nuclear Information System (INIS)

Lewis, B.J.; Corse, B.J.; Thompson, W.T.; Kaye, M.H.; Iglesias, F.C.; Elder, P.; Dickson, R.; Liu, Z.

1997-01-01

An analytical model has been developed to describe the release behaviour of low-volatile fission products from uranium dioxide fuel under severe reactor accident conditions. The effect of the oxygen potential on the chemical form and volatility of fission products is determined by Gibbs-energy minimization. The release kinetics are calculated according to the rate-controlling step of diffusional transport in the fuel matrix or fission product vaporization from the fuel surface. The effect of fuel volatilization (i.e., matrix stripping) on the release behaviour is also considered. The model has been compared to data from an out-of-pile annealing experiment performed in steam at the Chalk River Laboratories. (author)

Regulation Plans on Severe Accidents developed by KINS Severe Accident Regulation Preparation TFT

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyun Tae; Chung, Ku Young; Na, Han Bee [KINS, Daejeon (Korea, Republic of)

2016-05-15

Some nuclear power plants in Fukushima Daiichi site had lost their emergency reactor cooling function for long-time so the fuels inside the reactors were molten, and the integrity of containment was damaged. Therefore, large amount of radioactive material was released to environment. Because the social and economic effects of severe accidents are enormous, Korean Government already issued 'Severe Accident Policy' in 2001 which requires nuclear power plant operators to set up 'Quantitative Safety Goal', to do 'Probabilistic Safety Analysis', to install 'Severe Accident Countermeasures' and to make 'Severe Accident Management Plan'. After the Fukushima disaster, a Special Safety Inspection was performed for all operating nuclear power plants of Korea. The inspection team from industry, academia, and research institutes assessed Korean NPPs capabilities to cope with or respond to severe accidents and emergency situation caused by natural disasters such as a large earthquake or tsunami. As a result of the special inspection, about 50 action items were identified to increase the capability to cope with natural disaster and severe accidents. Nuclear Safety Act has been amended to require NPP operators to submit Accident Management Plant as part of operating license application. The KINS Severe Accident Regulation Preparation TFT had first investigated oversea severe accident regulation trend before and after the Fukushima accident. Then, the TFT has developed regulation draft for severe accidents such as Severe accident Management Plans, the required design features for new NPPs to prevent severe accident against multiple failures and beyond-design external events, countermeasures to mitigate severe accident and to keep the integrity of containment, and assessment methodology on safety assessment plan and probabilistic safety assessment.

Method for consequence calculations for severe accidents

International Nuclear Information System (INIS)

Nielsen, F.

1988-01-01

This report was commissioned by the Swedish State Power Board. The report contains a calculation of radiation doses in the surroundings caused by a theoretical core meltdown accident at Ringhals reactor No 3/4. The accident sequence chosen for the calcualtions was a release caused by total power failure. The calculations were made by means of the PLUCON4 code. A decontamination factor of 500 is used to account for the scrubber effect. Meteorological data for two years from the Ringhals meteorological tower were analysed to find representative weather situations. As typical weather, Pasquill D, was chosen with a wind speed of 10 m/s, and as extreme weather, Pasquill E, with a wind speed of 2 m/s. 19 refs. (author)

The 1986 Chernobyl accident; Der Unfall von Tschernobyl 1986

Energy Technology Data Exchange (ETDEWEB)

Kerner, Alexander; Stueck, Reinhard; Weiss, Frank-Peter [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Garching bei Muenchen, Koeln (Germany). Bereich Reaktorsicherheitsanalysen; Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Koeln (Germany)

2011-02-15

April 26, 2011 marks the 25th anniversary of the Chernobyl reactor accident, the worst incident in the history of the peaceful utilization of nuclear power. While investigations of the course of events and the causes of the accident largely present a uniform picture, descriptions still vary widely when it comes to the impact on the population and the environment. This treatment of the Chernobyl accident constitutes a summary of facts about the initiation of the accident and the sequence of events that followed. In addition, measures are described which were taken to exclude any repetition of a disaster of this kind. The health consequences and the socio-economic impact of the accident are not discussed in any detail. The first section contains an introduction and an overview of the Soviet RBMK (Chernobyl) reactor line. In section 2, fundamental characteristics of this special type of reactor, which was exclusively built in the former Soviet Union, are discussed. This information is necessary to understand the sequence of accident events and provides an answer to the frequent question whether that accident could be transferred to reactors in this country. The third section outlines the history of the accident caused ultimately by a commissioning test never performed before. The section is completed by a brief description of radiological releases and the state of the plant after the accident when entombed in the ''sarcophagus.'' The different causes are then summarized and the modifications afterwards made to RBMK reactors are outlined. (orig.)

Prevention and mitigation of severe accidents

International Nuclear Information System (INIS)

Weisshaeupl, H.

1996-01-01

For the European Pressurized water Reactor (EPR), jointly developed by French and German industry, great emphasis is laid to gain further improvement in prevention of severe accidents based on the accumulative experience and proven technology of the French and German PWR reactors. In this evolutionary development, a balanced and comprehensive approach in respect to implement new passive features has been chosen. Improvements in each step of the defense in depth concept lead to a further decrease in the probability of occurrence of a severe accident with partial or even gross melting of the core. The different phenomenons that occur during such an hypothetical accident must be taken into account during the conception of specific measurements necessary to mitigate accident consequences. To cope with the consequences of a severe accident with core melt down means to deal with different phenomena which may threaten the integrity of the containment or may lead to an enhanced fission product release into the environment: high pressure reactor pressure vessel failure; energetic molten fuel coolant interaction; direct containment heating, molten core concrete interaction; hydrogen combustion; long term pressure and temperature increase in the containment. The EPR approach follows the recommendations from the DFD (Deutsch-Franzosischer Direktionsausschuss), jointly prepared by the French and German safety authorities. The EPR concept consist to prevent or eliminate as far as possible scenarios which are connected with high loads (high pressure failure of the reactor pressure vessel, or global hydrogen detonation etc..) by dedicated design provisions, and to deal with the consequences of severe accident scenarios which are not ruled out by specific safety measures. The measures comprise: the primary system depressurization; the control of hydrogen; the stabilisation and cooling of the melted core; the containment heat removal. They are completed by specific characteristics

Minimally invasive tethered cord release in children: A technical note

Directory of Open Access Journals (Sweden)

S. Kağan Başarslan

2014-03-01

Full Text Available Tethered cord release is commonly performed in pediatric neurosurgery. Nowadays, minimally invasive procedures are created growing interest due to its highly tolerable nature for surgery. It has been main purpose a minimal damaging on access route and maximum protection of normal structures in surgery. We present a surgical treatment of tethered cord syndrome, by which is provided the cord releasing unlike the many methods being applied with tissue removal. The main advantage of performing this surgery through 2 cm hole is to avoid removing ligamentum flavum and bony structure like lamina in addition to reduce the length of the incision and the related scar tissue. J Clin Exp Invest 2014; 5 (1: 115-117 Technical note: the patient was taken on the operating table in the sitting-prone position, and L5-S1 distance was determined by fluoroscopy. The skin and subcutaneous tissues was passed via a 2 cm vertical incision settled in 0.5 cm laterally from midline. L5-S1 distance and its covering ligamentum flavum are displayed by the guidance of L5 lamina. Williams’s retractor was placed in the distance after fetching microscope. The foregoing procedures are the same with microdiscectomic surgery. By a vertical incision made on the flavum, its both layer was lifted up and hanged with simple suture on the back tissue for a comfortable exposure of the Dura. Thecal sac was opened by 0.5 cm long vertical incision on the Dura after obtaining secure CSF drainage with the help of yellow-tipped syringe needle. With finding by a nerve hook, the phylum was burned and released securely. Then the Dura was sutured primarily for the closure by means of microsurgery instruments, and flavum was laid on it again.

NPP Krsko Severe Accident Management Guidelines Implementation

International Nuclear Information System (INIS)

Basic, I.; Krajnc, B.; Bilic-Zabric, T.; Spiler, J.

2002-01-01

Severe Accident Management is a framework to identify and implement the Emergency Response Capabilities that can be used to prevent or mitigate severe accidents and their consequences. The USA NRC has indicated that the development of a licensee plant specific accident management program will be required in order to close out the severe accident regulatory issue (Ref. SECY-88-147). Generic Letter 88-20 ties the Accident management Program to IPE for each plant. The SECY-89-012 defines those actions taken during the course of an accident by the plant operating and technical staff to: 1) prevent core damage, 2) terminate the progress of core damage if it begins and retain the core within the reactor vessel, 3) maintain containment integrity as long as possible, and 4) minimize offsite releases. The subject of this paper is to document the severe accident management activities, which resulted in a plant specific Severe Accident Management Guidelines implementation. They have been developed based on the Krsko IPE (Individual Plant Examination) insights, Generic WOG SAMGs (Westinghouse Owners Group Severe Accident Management Guidances) and plant specific documents developed within this effort. Among the required plant specific actions the following are the most important ones: Identification and documentation of those Krsko plant specific severe accident management features (which also resulted from the IPE investigations). The development of the Krsko plant specific background documents (Severe Accident Plant Specific Strategies and SAMG Setpoint Calculation). Also, paper discusses effort done in the areas of NPP Krsko SAMG review (internal and external ), validation on Krsko Full Scope Simulator (Severe Accident sequences are simulated by MAAP4 in real time) and world 1st IAEA Review of Accident Management Programmes (RAMP). (author)

Methodology to classify accident sequences of an Individual Plant Examination according to the severe releases for BWR type reactors

International Nuclear Information System (INIS)

Sandoval V, S.

2001-01-01

The Light Water Reactor (LWR) operation regulations require to every operating plant to perform of an Individual Plant Examination study (Ipe). One of the main purposes of an Ipe is t o gain a more quantitative understanding of the overall probabilities of core damage and fission product releases . Probabilistic Safety Analysis (PSA) methodologies and Severe Accident Analysis are used to perform Ipe studies. PSA methodologies are used to identify and analyse the set of event sequences that might originate the fission product release from a nuclear power plant; these methodologies are combinatorial in nature and generate thousands of sequences. Among other uses within an Ipe, severe accident simulations are used to determine the characteristics of the fission product release for the identified sequences and in this way, the releases can be understood and characterized. A vast amount of resources is required to simulate and analyse every Ipe sequence. This effort is unnecessary if similar sequences are grouped. The grouping scheme must achieve an efficient trade off between problem reduction and accuracy. The methodology presented in this work enables an accurate characterization and analysis of the Ipe fission product releases by using a reduced problem. The methodology encourages the use of specific plant simulations. (Author)

Urban violence is the biggest cause of fatal work-related accidents in Brazil

OpenAIRE

Cordeiro, Ricardo; Luz, Verônica Gronau; Hennington, Élida Azevedo; Martins, Ana Cláudia Alves; Tófoli, Luís Fernando

2017-01-01

ABSTRACT OBJECTIVE To quantify the occurrence of deaths directly associated with urban violence among fatal work-related accidents. METHODS Verbal autopsies were performed with the relatives and coworkers of residents of Campinas, state of São Paulo, Brazil, who died from external causes in 2015. We have also analyzed police reports and reports of the Legal Medical Institute related to these deaths. RESULTS We have identified 82 fatal work-related accidents in Campinas in 2015, of which 25...

A Review of Criticality Accidents 2000 Revision

Energy Technology Data Exchange (ETDEWEB)

Thomas P. McLaughlin; Shean P. Monahan; Norman L. Pruvost; Vladimir V. Frolov; Boris G. Ryazanov; Victor I. Sviridov

2000-05-01

Criticality accidents and the characteristics of prompt power excursions are discussed. Sixty accidental power excursions are reviewed. Sufficient detail is provided to enable the reader to understand the physical situation, the chemistry and material flow, and when available the administrative setting leading up to the time of the accident. Information on the power history, energy release, consequences, and causes are also included when available. For those accidents that occurred in process plants, two new sections have been included in this revision. The first is an analysis and summary of the physical and neutronic features of the chain reacting systems. The second is a compilation of observations and lessons learned. Excursions associated with large power reactors are not included in this report.

A Review of Criticality Accidents 2000 Revision

International Nuclear Information System (INIS)

McLaughlin, Thomas P.; Monahan, Shean P.; Pruvost, Norman L.; Frolov, Vladimir V.; Ryazanov, Boris G.; Sviridov, Victor I.

2000-01-01

Criticality accidents and the characteristics of prompt power excursions are discussed. Sixty accidental power excursions are reviewed. Sufficient detail is provided to enable the reader to understand the physical situation, the chemistry and material flow, and when available the administrative setting leading up to the time of the accident. Information on the power history, energy release, consequences, and causes are also included when available. For those accidents that occurred in process plants, two new sections have been included in this revision. The first is an analysis and summary of the physical and neutronic features of the chain reacting systems. The second is a compilation of observations and lessons learned. Excursions associated with large power reactors are not included in this report

Descriptive Study of Occupational Accidents and their Causes among Electricity Distribution Company Workers at an Eight-year Period in Iran

Science.gov (United States)

Rahmani, Abdolrasoul; Khadem, Monireh; Madreseh, Elham; Aghaei, Habib-Allah; Raei, Mehdi; Karchani, Mohsen

2013-01-01

Background Occupational accidents are unplanned events that cause damage. The socio-economic impacts and human costs of accidents are tremendous around the world. Many fatalities happen every year in workplaces such as electricity distribution companies. Some electrical injuries are electrocution, electric shock, and burns. This study was conducted in an electricity distribution company (with rotational 12-hour shift work) in Iran during an 8-year period to survey descriptive factors of injuries. Methods Variables collected included accident time, age of injured worker, employment type, work experience, injury cause, educational background, and other information about accidents. Results Results indicated that most of the accidents occurred in summer, and 51.3% were during shift work. Worker negligence (malpractice) was the cause of 75% of deaths. Type of employment had a significant relationship with type of injuries (p safety was related to job experiences. Temporary workers have no chance to work all year like permanent workers, therefore impressive experiences may be less in them. Because the lack of protective equipment and negligence are main causes of accidents, periodical inspections in workshops are necessary. PMID:24106647

Low level waste shipment accident lessons learned

International Nuclear Information System (INIS)

Rast, D.M.; Rowe, J.G.; Reichel, C.W.

1995-01-01

On October 1, 1994 a shipment of low-level waste from the Fernald Environmental Management Project, Fernald, Ohio, was involved in an accident near Rolla, Missouri. The accident did not result in the release of any radioactive material. The accident did generate important lessons learned primarily in the areas of driver and emergency response communications. The shipment was comprised of an International Standards Organization (ISO) container on a standard flatbed trailer. The accident caused the low-level waste package to separate from the trailer and come to rest on its top in the median. The impact of the container with the pavement and median inflicted relatively minor damage to the container. The damage was not substantial enough to cause failure of container integrity. The success of the package is attributable to the container design and the packaging procedures used at the Fernald Environmental Management Project for low-level waste shipments. Although the container survived the initial wreck, is was nearly breached when the first responders attempted to open the ISO container. Even though the container was clearly marked and the shipment documentation was technically correct, this information did not identify that the ISO container was the primary containment for the waste. The lessons learned from this accident have DOE complex wide applicability. This paper is intended to describe the accident, subsequent emergency response operations, and the lessons learned from this incident

Protective action evaluation, Part 1. Effectiveness of sheltering as a protective action against nuclear accidents involving gaseous releases

International Nuclear Information System (INIS)

Anno, G.H.; Dore, M.A.

1978-04-01

In an airborne release of radioactive material from a nuclear power plant accident, sheltering of individuals is of importance in emergency protective action planning. An analysis to estimate the effectiveness or benefit that might be derived from sheltering is described. The objective of this effort is the development of sheltering effectiveness information for those responsible for formulating required emergency plans for nuclear power plant siting. Shelter effectiveness is specifically defined as the dose reduction factor (DRF). DRF estimates for different conditions of source release, shelter structure assumptions, and operational time parameters are made for both whole-body and thyroid doses separately, based on a single-compartment structural model of the time-varying outside and inside gaseous radionuclide sources of krypton, zenon, and iodine. Design basis accident (DBA) assumptions are made for the gaseous radionuclide release. The magnitude of the release and dose estimates are based on radionuclide data from The Reactor Safety Study (WASH-1400). Source release time and duration assumptions are related to release categories PWR 1, PWR 3, and PWR 4, for which release times range from 1.5 to 2.5 hr and the release duration ranges from 0.5 to 3 hr. The basic shelter model characteristics considered are gamma ray attentuation, source geometry, gaseous fission-product ingress, and air change rate. Temporal parameters considered are source release time and duration, cloud travel time, and time spent in the shelter structure. Also, the analysis of shelter effectiveness is based on a time-frame model, which can be conveniently related to other operational times important for emergency planning. In addition to developing shelter-effectiveness estimates parametrically, the advantage of exiting and evacuating the vicinity of the shelter area after some initial time in the shelter is analyzed from the standpoint of the DRF and temporal considerations

Domino effect in chemical accidents: main features and accident sequences

OpenAIRE

Casal Fàbrega, Joaquim; Darbra Roman, Rosa Maria

2010-01-01

The main features of domino accidents in process/storage plants and in the transportation of hazardous materials were studied through an analysis of 225 accidents involving this effect. Data on these accidents, which occurred after 1961, were taken from several sources. Aspects analyzed included the accident scenario, the type of accident, the materials involved, the causes and consequences and the most common accident sequences. The analysis showed that the most frequent causes a...

Comparison of the Chernobyl and Fukushima nuclear accidents: A review of the environmental impacts

Energy Technology Data Exchange (ETDEWEB)

Steinhauser, Georg, E-mail: georg.steinhauser@colostate.edu; Brandl, Alexander; Johnson, Thomas E.

2014-02-01

The environmental impacts of the nuclear accidents of Chernobyl and Fukushima are compared. In almost every respect, the consequences of the Chernobyl accident clearly exceeded those of the Fukushima accident. In both accidents, most of the radioactivity released was due to volatile radionuclides (noble gases, iodine, cesium, tellurium). However, the amount of refractory elements (including actinides) emitted in the course of the Chernobyl accident was approximately four orders of magnitude higher than during the Fukushima accident. For Chernobyl, a total release of 5300 PBq (excluding noble gases) has been established as the most cited source term. For Fukushima, we estimated a total source term of 520 (340–800) PBq. In the course of the Fukushima accident, the majority of the radionuclides (more than 80%) was transported offshore and deposited in the Pacific Ocean. Monitoring campaigns after both accidents reveal that the environmental impact of the Chernobyl accident was much greater than of the Fukushima accident. Both the highly contaminated areas and the evacuated areas are smaller around Fukushima and the projected health effects in Japan are significantly lower than after the Chernobyl accident. This is mainly due to the fact that food safety campaigns and evacuations worked quickly and efficiently after the Fukushima accident. In contrast to Chernobyl, no fatalities due to acute radiation effects occurred in Fukushima. - Highlights: • The environmental effects of Chernobyl and Fukushima are compared. • Releases of radionuclides from Chernobyl exceeded Fukushima by an order of magnitude. • Chernobyl caused more severe radiation-related health effects. • Overall, Chernobyl was a much more severe nuclear accident than Fukushima. • Psychological effects are neglected but important consequences of nuclear accidents.

Radioactive release from VVER-1000 reactors after a terror attack

International Nuclear Information System (INIS)

Sdouz, G.

2005-01-01

Full text: One of the terror scenarios for nuclear power plants is a severe damage of the reactor containment caused by a plane crash or a missile. Due to the loss of electric power the cooling of the core is not maintained leading to a core melt accident. Normally in the course of severe accidents an intact containment has the ability to retain a large part of the radioactive inventory. The goal of this work is the investigation of the behavior of the radioactive release from a VVER-1000-type reactor during a severe accident with a large containment leak from the beginning of the accident. The results are compared with the release in a severe accident via a very small leakage due to the untightness of the containment. This work supplements a series of studies investigating the behavior of a VVER-1000-type reactor during severe accidents under different accident management strategies. The focus in this study is on the 'station blackout'-sequence (or TMLB' in the WASH-1400 nomenclature). The calculations were performed using the Source Term Code Package (STCP), hydrogen explosions are not considered. Up to the melt-through of the cavity bottom the thermal-hydraulics phenomena are almost identical to the TMLB'-case with an intact containment from the beginning. The phenomena occur slightly delayed due to the large containment leak. When the core-concrete-interaction begins the resulting gases leave the containment through the large leak and do not cause a pressure increase. The containment pressure remains at ambient pressure. Due to the different behavior and to the different release times of the nuclides the deviations to the scenario with an intact containment show a great variety. From this comparison it can be shown that the intact containment retains the nuclides up to a factor of 6000. (author)

Seminar on Comparative assessment of the environmental impact of radionuclides released during three major nuclear accidents: Kyshtym, Windscale, Chernobyl. Vol. 1

International Nuclear Information System (INIS)

1991-01-01

These proceedings of seminar on comparative assessment of the environmental impact of radionuclides released during three major nuclear accidents (Kyshtym, Windscale, Chernobyl) are divided into 5 parts bearing on: part 1: accident source terms; part 2: atmospheric dispersion, resuspension, chemical and physical forms of contamination; part 3: environmental contamination and transfer; part 4: radiological implications for man and his environment; part 5: countermeasures

The reactor accident of Chernobyl

International Nuclear Information System (INIS)

Koenig, L.A.; Schuettelkopf, H.; Erat, S.; Fessler, H.; Hempelmann, S.; Maurer, K.; Pimpl, M.; Radziwill, A.

1986-08-01

The contamination, caused by the radioactivity released during the reactor accident of Chernobyl was measured in samples taken in the environment of the Karlsruhe Nuclear Research Center. The radioactivity was determined in air, fodder, milk, vegetables, other plants, foodstuffs, soil, precipitations, drinking water, sludge and other samples. Results of measurements are reported which were received with considerably more than 1000 samples. The evaluation of the data will be presented in KfK 4140. (orig.) [de

Carbon Dioxide Flush of an Integrated Minimized Perfusion Circuit Prior to Priming Prevents Spontaneous Air Release Into the Arterial Line During Clinical Use.

Science.gov (United States)

Stehouwer, Marco C; de Vroege, Roel; Hoohenkerk, Gerard J F; Hofman, Frederik N; Kelder, Johannes C; Buchner, Bas; de Mol, Bastian A; Bruins, Peter

2017-11-01

Recently, an oxygenator with an integrated centrifugal blood pump (IP) was designed to minimize priming volume and to reduce blood foreign surface contact even further. The use of this oxygenator with or without integrated arterial filter was compared with a conventional oxygenator and nonintegrated centrifugal pump. To compare the air removal characteristics 60 patients undergoing coronary artery bypass grafting were alternately assigned into one of three groups to be perfused with a minimized extracorporeal circuit either with the conventional oxygenator, the oxygenator with IP, or the oxygenator with IP plus integrated arterial filter (IAF). Air entering and leaving the three devices was measured accurately with a bubble counter during cardiopulmonary bypass. No significant differences between all groups were detected, considering air entering the devices. Our major finding was that in both integrated devices groups incidental spontaneous release of air into the arterial line in approximately 40% of the patients was observed. Here, detectable bolus air (>500 µm) was shown in the arterial line, whereas in the minimal extracorporeal circulation circuit (MECC) group this phenomenon was not present. We decided to conduct an amendment of the initial design with METC-approval. Ten patients were assigned to be perfused with an oxygenator with IP and IAF. Importantly, the integrated perfusion systems used in these patients were flushed with carbon dioxide (CO 2 ) prior to priming of the systems. In the group with CO 2 flush no spontaneous air release was observed in all cases and this was significantly different from the initial study with the group with the integrated device and IAF. This suggests that air spilling may be caused by residual air in the integrated device. In conclusion, integration of a blood pump may cause spontaneous release of large air bubbles (>500 µm) into the arterial line, despite the presence of an integrated arterial filter. CO 2 flushing of

[Work accidents and automatic circuit reclosers in the electricity sector: beyond the immediate causes].

Science.gov (United States)

Silva, Alessandro Jose Nunes da; Almeida, Ildeberto Muniz de; Vilela, Rodolfo Andrade de Gouveia; Mendes, Renata Wey Berti; Hurtado, Sandra Lorena Beltran

2018-05-10

The Brazilian electricity sector has recorded high work-related mortality rates that have been associated with outsourcing, used to cut costs. In order to decrease the power outage time for consumers, the industry adopted the automatic circuit recloser as the technical solution. The device has hazardous implications for maintenance workers. The aim of this study was to analyze the origins and consequences of work accidents in power systems with automatic circuit recloser, using the Accident Analysis and Prevention (AAP) model. The AAP model was used to investigate two work accidents, aimed to explore the events' organizational origins. Case 1 - when changing a deenergized secondary line, a worker received a shock from the energized primary cable (13.8kV). The system reclosed three times, causing severe injury to the worker (amputation of a lower limb). Case 2 - a fatal work accident occurred during installation of a new crosshead on a partially insulated energized line. The tip of a metal cross arm section strap touched the energized secondary line and electrocuted the maintenance operator. The circuit breaker component of the automatic circuit recloser failed. The analyses revealed how business management logic can participate in the root causes of work accidents through failures in maintenance management, outsourced workforce management, and especially safety management in systems with reclosers. Decisions to adopt automation to guarantee power distribution should not overlook the risks to workers in overhead power lines or fail to acknowledge the importance of ensuring safe conditions.

The terrestrial environmental dynamics of radioactive nuclides released by the Fukushima nuclear accident

International Nuclear Information System (INIS)

Furukawa, Jun

2014-01-01

Research into environmental dynamics of radioactive nuclides released by the Fukushima nuclear accident, especially radiocesium 137 Cs (half-life, 30.1 years), is highly focused especially on diffusion processes of radiocesium into ecosystems, which is high-priority knowledge. Because of relatively sparse knowledge about the reallocation of radiocesium contained in organic matter in terrestrial ecosystems, the effects of diffused rediocesium into ecosystem cannot be accurately estimated. In this article, the terrestrial environmental dynamics of radiocesium mainly in the processes of plant uptake and the possibility of release from plants will be discussed. Plants uptake minerals from soil and these minerals are likewise ingested by animals that feed on plants, including humans. Therefore one of the main gateways of radiocesium into ecosystem is via plants. From the viewpoint of human dietary consumption, rice contamination with radiocesium has been energetically investigated and useful data are accumulating. Processes of radiocesium uptake mechanisms by plants are being researched using legumes, e.g. soybean. Speculation on the possibility of radiocesium release into forest atmosphere via plant activity will be introduced. (author)

Tritium loading in ITER plasma-facing surfaces and its release under accident conditions

International Nuclear Information System (INIS)

Longhurst, G.R.; Anderl, R.A.; Pawelko, R.J.

1996-01-01

Plasma-facing surfaces of the International Thermonuclear Experimental Reactor (ITER) will take up tritium from the plasma. These surfaces will probably consist of matures of Be, C, and possibly W together with other impurities. Recent experimental results have suggested mechanisms, not previously considered in analyses, by which tritium and other hydrogen isotopes are retained in Be. This warrants revised modeling and estimation of the amount of tritium that will be deposited in ITER beryllium plasma-facing surfaces and the rates at which it can be released under postulated accident scenarios. In this paper we describe improvements in modeling and experiments planned at the Idaho National Engineering Laboratory (INEL) to investigate the tritium uptake and thermal release behavior for mixed plasma- facing materials. TMAP4 calculations were made using recent data to estimate first-wall tritium inventories in ITER. 16 refs., 1 fig

Development of filter module for passive filtration and accident gas release confinement system for NPP

International Nuclear Information System (INIS)

Yelizarov, P.G.; Efanov, A.D.; Martynov, P.N.; Masalov, D.P.; Osipov, V.P.; Yagodkin, I.V.

2005-01-01

Full text of publication follows: One of the urgent problems of the safe NPP operation is air cleaning from radioactive aerosols and volatile iodine compounds under the accident operation conditions of NPP. A principally new passive accident gas release confinement system is used as the basis of the designs of new generation reactor power blocks under the-beyond-design-basis accident conditions with total loss of current. The basic structural component of the passive filtration system (PFS) is the filter-sorber being heated up to 300 deg. C. The filter-sorber represents a design consisting of 150 connected in parallel two-step filtering modules. The first step is intended to clean air from radioactive aerosols, the second one - to clean air from radioactive iodine and its volatile compounds. The filter-sorber is located in the upper point of the exterior protection shell. Due to natural convection, it provides confinement of r/a impurities and controlled steam-gas release from the inter-shell space into atmosphere. The basic specific design feature is the two-section design of the PFS filter module consisting of a coarse-cleaning section and a fine-cleaning section. A combination of layer-by-layer put filtering materials on the basis of glass fiber and metal fiber. The pilot PFS filter module specimen tests run in conditions modeling accident situation indicated that at a filtration rate of 0,3 cm/s the aerodynamic resistance of the module does not exceed 12 Pa, the filtration effectiveness equals 99,99 % in terms of aerosol, no less than 99,9% in terms of radioactive 131 I and no less than 99,0% in terms of organic compounds of iodine (CH 3 131 I); the dust capacity amounts to a value above 50 g/m 2 . The obtained results of tests comply with the design requirements imposed on the PFS filter-sorber module. (authors)

Critical analysis of accident scenario and consequences modelling applied to light-water reactor power plants for accident categories beyond the design basis accident (DBA)

International Nuclear Information System (INIS)

Brofferio, C.; Cagnetti, P.; Ferrara, V.; Manilia, E.; Pietrangeli, G.; Sennis, C.

1985-01-01

A critical analysis and sensitivity study of the modelling of accident scenarios and environmental consequences are presented, for light-water reactor accident categories beyond the standard design-basis-accident category. The first chapter, on ''source term'' deals with the release of fission products from a damaged core inventory and their migration within the primary circuit and the reactor containment. Particular attention is given to the influence of engineering safeguards intervention and of the chemical forms of the released fission products. The second chapter deals with their release to the atmosphere, transport and wet or dry deposition, outlining relevant partial effects and confronting short-duration or prolonged releases. The third chapter presents a variability analysis, for environmental contamination levels, for two extreme hypothetical scenarios, evidencing the importance of plume rise. A numerical plume rise model is outlined

The Goiania accident: release from hospital criterion

International Nuclear Information System (INIS)

Falcao, R.C.; Hunt, J.

1990-01-01

On the thirteenth of September 1987, a 1357 Ci Cesium source was removed from the 'Instituto de Radiologia de Goiania' - probably two or three days later the source was opened, causing the internal and external contamination of 247 people, and part of the city of Goiania. This paper describes the release from hospital criterion of the contaminated patients, based on radiation protection principles which were developed for this case. The estimate of the biological half-life for cesium is also described. (author) [pt

Environmental accident and its treatment in a developing country: a case study on China.

Science.gov (United States)

Hou, Yu

2012-08-01

Along with their rapid progress, developing countries have had to deal with more environmental problems, which have been a cause for concern among policy makers and the public in general. This study cites two accidents that happened in China in 2006 that caused serious environmental problems in nearby communities and discusses the problems these accidents created and the resulting disputes among the concerned people. Pollution-causing accidents not only pose threats to the health of the victims but also give rise to environmental disputes that jeopardise national security and social stability. Conflicts normally ensue following a pollution-causing accident, which are more likely to happen within a development zone or industrial park. Few environmental conflicts in the past decades were resolved through litigation. Nevertheless, there are lapses in the regulatory system, which have to be addressed to ensure that the public's rights and interests are protected. Currently, reports on pollution-causing accidents are difficult to obtain and are often released very late. A majority of industrial firms operate without environmental clearance, thus highlighting the government's inefficiency in environmental management. It is about time that the Chinese government takes seriously the use of the Environmental Impact Assessment.

Evaluation of containment failure modes and fission product releases during core meltdown accidents in a BWR with a Mark III containment

International Nuclear Information System (INIS)

Ludewig, H.; Yu, W.S.; Jaung, R.; Pratt, W.T.

1985-01-01

An assessment is described of potential failure modes and fission product releases for a large number of postulated core meltdown accidents in a BWR with a Mark III containment. For this containment design, the most important failure mode was found to be due to hydrogen related phenomena. A one-dimensional lumped parameter computer code has been developed and used to determine the probability of various hydrogen phenomena for a range of postulated core meltdown sequences. Potential containment loads have been estimated and compared against the containment capacity to determine the probability of containment failure. The fission product release assessment began by using the MARCH/CORRAL system of codes with key input parameters varied over a reasonable range. The parameters relate to primary system retention, re-emission, pool scrubbing, and fission product release in-vessel vs ex-vessel. The final step used more mechanistic calculations based on the system of codes recently developed under sponsorship of the Accident Source Term Program Office, NRC, and compares these predictions with the range of releases calculated in the sensitivity study

US nuclear industry approach to severe accident management guidance development and implementation

International Nuclear Information System (INIS)

Modeen, D.; Walsh, L.; Oehlberg, R.

1992-01-01

The purpose of this paper is to discuss the US nuclear industry activities, occurring under the auspices of Nuclear Management and Resources Council (NUMARC), to define, develop and implement enhancements to utility accident management capabilities. This effort consists of three major parts: (1) Development of a practical framework for evaluation of plant-specific accident management capabilities and the subsequent implementation of selected enhancements. (2) Development of specific technical guidance that address arresting core damage if it begins, either in-vessel or ex-vessel, and maintaining containment integrity. Preventing inadequate core cooling or minimizing the consequences of offsite releases, while considered to be candidate areas for accident management enhancements, have been the subject of intense previous study and development. (3) Plant-specific implementation of accident management enhancements in three areas: (a) personnel resources (organization, training, communications); (b) systems and equipment (restoration and repair, instrumentation, use of alternatives); and (c) information resources (procedures and guidance, technical information, process information)

Accident Management ampersand Risk-Based Compliance With 40 CFR 68 for Chemical Process Facilities

International Nuclear Information System (INIS)

O'Kula, K.R.; Taylor, R.P. Jr.; Ashbaugh, S.G.

1995-01-01

A risk-based logic model is suggested as an appropriate basis for better predicting accident progression and ensuing source terms to the environment from process upset conditions in complex chemical process facilities. Under emergency conditions, decision-makers may use the Accident Progression Event Tree approach to identify the best countermeasure for minimizing deleterious consequences to receptor groups before the atmospheric release has initiated. It is concluded that the chemical process industry may use this methodology as a supplemental information provider to better comply with the Environmental Protection Agency's proposed 40 CFR 68 Risk Management Program rule. An illustration using a benzene-nitric acid potential interaction demonstrates the value of the logic process. The identification of worst-case releases and planning for emergency response are improved through these methods, at minimum. It also provides a systematic basis for prioritizing facility modifications to correct vulnerabilities

The Fukushima accident

International Nuclear Information System (INIS)

Maqua, M.; Stueck, R.

2012-01-01

On 11 March 2011, the Tohoku earthquake and the subsequent tsunami hit the Japanese east coast, causing more than 15,000 fatalities. To this date, 3,000 people are still missing. The Fukushima Dai-ichi NPP was the nuclear installation that was most affected by the tsunami. The earthquake cut off the NPP from the national grid. About 45 minutes later, the tsunami flooded units 1-4 and led to core meltdown events with large releases for units 1, 2 and 3. Unit 4 had been in refuelling outage at that time and lost the cooling of the spent fuel pool for several days. Considerable hydrogen explosions occurred in units 1, 3 and 4. Shortly after the accident, TEPCO started to mitigate the consequences of the accident by providing external cooling to the reactors and by removing the radioactive debris from the site. Great emphasis was laid on effective radiation protection measures for the clean-up workers. Thus, up to now there has been no fatality due to the radiation caused by the Fukushima accident. The main steps of the accident sequences are described, taking into account the latest findings of investigations performed by TEPCO or on behalf of the regulatory body. The presentation focuses on the description of the status of the Fukushima Dai-ichi nuclear power plant and the future steps for cleaning-up the site. In the presentation, the major phases of the roadmap that TEPCO has developed for the clean-up are highlighted. The risks associated with the current plant status and the clean-up phases are described. Abstract the content of the manuscript in a few lines.

Massive radiological releases profoundly differ from controlled releases

International Nuclear Information System (INIS)

Pascucci-Cahen, Ludivine; Patrick, Momal

2013-01-01

In this article, the authors report identification and assessment of different types of costs associated with nuclear accidents. They first outline that these cost assessments must be as exhaustive or comprehensive as possible. While referring to past accidents, they define the different categories of costs: on-site costs (decontamination and dismantling, electricity not produced on the site), off-site costs (health costs, psychological costs, farming losses), image-related costs (impact on food and farm product exports, decrease of other exports), costs related to energy production, costs related to contaminated areas (refugees, lands). They give an assessment of a severe nuclear accident (i.e. an accident with important but controlled radiological releases) in France and outline that it would be a national catastrophe which could be however managed. They discuss the possible variations of the estimated costs. Then, they show that a major accident (i.e. an accident with massive radiological releases) in France would be an unmanageable European catastrophe because of the radiological consequences, of high economic costs, and of huge losses

Design features of ACR in severe accident mitigation

International Nuclear Information System (INIS)

Shapiro, H.; Krishnan, V.S.; Santamaura, P.; Lekakh, B.; Blahnik, C.

2007-01-01

failed structure would retain some capability to reduce radioactivity release into the environment. SAMDAs that enhance the capabilities for minimizing the offsite releases (venting) are being actively examined further. State-of-the art hydrogen control of igniters and passive, auto-catalytic recombiners are provided. The ACR design is not prone to core-concrete interactions by virtue of multiple, externally cooled barriers between the fuel and the containment floor as well as due to characteristics of the compartment into which the core materials would eventually penetrate (i.e., a large area for debris spread and multiple means of keeping the debris submerged in water). The instrumentation that provides reliable data to the severe accident management team is critical to successful accident mitigation. The ACR instruments provide the necessary coverage of all critical plant parameters in two locations (main control room and secondary control area). As far as practical, these instruments will be hardened to withstand the severe accident conditions. All critical instruments will be assessed for survivability under severe accident conditions. (authors)

causes and consequences of commercial motorcycle accidents

African Journals Online (AJOL)

PROF EKWUEME

Accident associated with the use of motorcycle for commercial transportation in Makurdi metropolis was ... deaths, over speeding accounted for 27 percent of accidents and deaths respectively, .... 10. 7. 5. (a). (b). Possession of wing mirror and Crash helmet. Yes. No. 12 .... reduce the risk of serious head and brain injuries.

Challenging the immediate causes: A work accident investigation in an oil refinery using organizational analysis.

Science.gov (United States)

Beltran, Sandra Lorena; Vilela, Rodolfo Andrade de Gouveia; de Almeida, Ildeberto Muniz

2018-01-01

In many companies, investigations of accidents still blame the victims without exploring deeper causes. Those investigations are reactive and have no learning potential. This paper aims to debate the historical organizational aspects of a company whose policy was incubating an accident. The empirical data are analyzed as part of a qualitative study of an accident that occurred in an oil refinery in Brazil in 2014. To investigate and analyse this case we used one-to-one and group interviews, participant observation, Collective Analyses of Work and a documentary review. The analysis was conducted on the basis of concepts of the Organizational Analysis of the event and the Model for Analysis and Prevention of Work Accidents. The accident had its origin in the interaction of social and organizational factors, among them being: excessively standardized culture, management tools and outcome indicators that give a false sense of safety, the decision to speed up the project, the change of operator to facilitate this outcome and performance management that encourages getting around the usual barriers. The superficial accident analysis conducted by the company that ignored human and organizational factors reinforces the traditional safety culture and favors the occurrence of new accidents.

Insights into the control of the release of iodine, cesium, strontium and other fission products in the containment by severe accident management

International Nuclear Information System (INIS)

2000-03-01

This document is intended to provide a management-level overview of the technical bases for accident management activities to attenuate releases of radioactive materials in the very unlikely event of a severe nuclear power reactor accident - activities known commonly as management of severe accident source terms. Such activities are natural complements to accident management activities directed at arresting or slowing accident progression. Abbreviated, qualitative discussions are presented in the document on the more important severe nuclear reactor accidents, the nature of radioactive material releases during accidents, natural processes that act to attenuate the amount of radioactive material that can escape a power plant, and the physical and chemical principles used in engineered systems to further attenuate radioactive releases during accidents. At the end of each section of the report, an annotated bibliography is provided. These bibliographies are intended to serve as introductions to the vast literature pertinent to all aspects of accident management including the management of radioactive source terms. Finally, it must be noted that much of the presentation has been made from the perspective of conventional pressurized water reactors and boiling water reactors. Many important details will be different for other types of reactors or for reactors with special features. Readers are asked to do the mental manipulations necessary to apply the ideas discussed here to the particular circumstances and features of their own reactors. The report is based on the following outline: - a brief discussion of fission product sources; fission product characteristics; chemical compounds; - transport and deposition of fission products; brief description of different deposition and agglomeration processes; - retention of fission products; re-evaporation, resuspension, etc.; - discussion of various possibilities to enhance the removal of fission products from the containment

Management of severe accidents

International Nuclear Information System (INIS)

Jankowski, M.W.

1987-01-01

The definition and the multidimensionality aspects of accident management have been reviewed. The suggested elements in the development of a programme for severe accident management have been identified and discussed. The strategies concentrate on the two tiered approaches. Operative management utilizes the plant's equipment and operators capabilities. The recovery managment concevtrates on preserving the containment, or delaying its failure, inhibiting the release, and on strategies once there has been a release. The inspiration for this paper was an excellent overview report on perspectives on managing severe accidents in commercial nuclear power plants and extending plant operating procedures into the severe accident regime; and by the most recent publication of the International Nuclear Safety Advisory Group (INSAG) considering the question of risk reduction and source term reduction through accident prevention, management and mitigation. The latter document concludes that 'active development of accident management measures by plant personnel can lead to very large reductions in source terms and risk', and goes further in considering and formulating the key issue: 'The most fruitful path to follow in reducing risk even further is through the planning of accident management.' (author)

Management of severe accidents

International Nuclear Information System (INIS)

Jankowski, M.W.

1988-01-01

The definition and the multidimensionality aspects of accident management have been reviewed. The suggested elements in the development of a programme for severe accident management have been identified and discussed. The strategies concentrate on the two tiered approaches. Operative management utilizes the plant's equipment and operators capabilities. The recovery management concentrates on preserving the containment, or delaying its failure, inhibiting the release, and on strategies once there has been a release. The inspiration for this paper was an excellent overview report on perspectives on managing severe accidents in commercial nuclear power plants and extending plant operating procedures into the severe accident regime; and by the most recent publication of the International Nuclear Safety Advisory Group (INSAG) considering the question of risk reduction and source term reduction through accident prevention, management and mitigation. The latter document concludes that active development of accident management measures by plant personnel can lead to very large reductions in source terms and risk, and goes further in considering and formulating the key issue: The most fruitful path to follow in reducing risk even further is through the planning of accident management

A RESEARCH ON ACCIDENTS RISKS AND CAUSES IN THE NEONATAL INTENSIVE CARE UNITS

Directory of Open Access Journals (Sweden)

Haluk Tanrıverdi

2015-10-01

Full Text Available This study aims to demonstrate the relationship between the qualifications of neonatal intensive care units of hospitals (physical conditions, standard applications, employee qualifications and use of personal protective equipment and work related causes and risks, employee related causes and risks when occupational accidents occur. Accordingly, a survey was prepared and was made among 105 nurses working in 3 public and 3 private hospital's neonatal intensive care units, in the January of 2010. The survey consists of questions about the qualifications of neonatal intensive care units, work related causes and risks, and employee related causes and risks. From the regression analysis conducted, it has been found that confirmed hypotheses in several studies in the literature were not significant in this study. The sub-dimensions in which relationships has been found show that the improvement of the physical environment in workplace, the improvement of the employee qualifications and standard applications can reduce the rate of occupational accidents. According to the results of this study management should take care of the organizational factors besides to improvement of the physical environment in workplace, the improvement of the employee qualifications and standard applications.

A survey on hazardous materials accidents during road transport in China from 2000 to 2008

International Nuclear Information System (INIS)

Yang Jie; Li Fengying; Zhou Jingbo; Zhang Ling; Huang Lei; Bi Jun

2010-01-01

A study of 322 accidents that occurred during the road transport of hazardous materials (hazmat) in China from 2000 to 2008 was carried out. The results showed an increase in the frequency of accidents from 2000 to 2007 and a decline in 2008. More than 63% of the accidents occurred in the eastern coastal areas, 25.5% in the central inland areas, and only 10.9% in the western remote areas. The most frequent types of accident were releases (84.5%), followed by gas clouds (13.0%), fires (10.2%), no substance released due to timely measures (9.9%), and explosions (5.9%). The spatial distribution, the causes and consequences of the accidents related to the population (e.g., number of people killed, injured, evacuated, or poisoned), and environment elements were analyzed. Finally, conclusions are drawn concerning the need to improve certain safety measures in the road transport of hazmat in China.

Evaluation of release amount of radioactivity from Chernobyl accident and of resulting radiological consequence in China

International Nuclear Information System (INIS)

Zhang Yongxing

1987-01-01

Three kinds of methods are used to evaluate the release amount from Chernoby1 RBMK-1000 reactor accident, i.e. (1) estimation by comparison with Windscale accident; (2) estimation in terms of the stock in the core; and (3) estimation according to the available monitoring data form adjacent countries such as Poland and Finland. The results obtained are as follows: the release of I-131 was 0.1-1.5 EBq, which is approximately 4-50% of the stock in the core; the release amount of Ru-103 was comparable to that of Cs-137, both approximately 5-10% of that of I-131; the volatile nuclides such as Mo-99, Ru-103, Te-132, Cs-137 etc., were in the order of 0.4 EBq; involatile nuclides were 0.2 EBq; noble gases and other fission products 10 EBq; and the total amount released was about 20 EBq, which taken together 8% of the stock in the core. The radioactive cloud cluster passed through over the area of China in the beginning of May. It was estimated that the total amount of I-131 in air over China area was about 1.6 PB q , Cs-137 about 0.3 PB q , Ru-103 about 0.2 PB q ; the total fallout in the area of China was about 3 PB q for I-131, about 0.1 PB q for Cs-137, about 0.3 PB q for Ru-103. The resulting effective dose equavalent commitment to critical group individual was about 60 μSv, collective effective dose equavalent commitment received by the population of China was about 1 x 10 4 man.Sv

Noble gas confinement for reactor fuel melting accidents

International Nuclear Information System (INIS)

Monson, P.R.

1984-01-01

In the unlikely event of a fuel melting accident, radioactive material would be released into the reactor room. This radioactive material would consist of particulate matter, iodine, tritium, and the noble gases krypton and xenon. In the case of reactors with containment domes the gases would be contained for subsequent cleanup. For reactors without contaiment the particulates and the iodine can be effectively removed with HEPA and carbon filters of current technology; however, noble gases cannot be easily removed and would be released to the atmosphere. In either case, it would be highly desirable to have a system that could be brought online to treat this contaminated air to minimize the population dose. A low temperature adsorption system has been developed at the Savannah River Laboratory to remove the airborne radioactive material from such a fuel melting accident. Over two dozen materials have been tested in extensive laboratory studies, and hydrogen mordenite and silver mordenite were found to be the most promising adsorbents. A full-scale conceptual design has also been developed. Results of the laboratory studies and the conceptual design are discussed along with plans for further development of this concept

Noble gas confinement for reactor fuel melting accidents

International Nuclear Information System (INIS)

Monson, P.R.

1985-01-01

In the unlikely event of a fuel melting accident radioactive material would be released into the reactor room. This radioactive material would consist of particulate matter, iodine, tritium, and the noble gases krypton and xenon. In the case of reactors with containment domes, the gases would be contained for subsequent cleanup. For reactors without containment the particulates and the iodine can be effectively removed with HEPA and carbon filters of current technology; however, noble gases cannot be easily removed and would be released to the atmosphere. In either case, it would be highly desirable to have a system that could be brought online to treat this contaminated air to minimize the population dose. A low temperature adsorption system has been developed at the Savannah River Laboratory to remove the airborne radioactive material from such a fuel melting accident. Over two dozen materials have been tested in extensive laboratory studies, and hydrogen mordensite and silver mordenite were found to be the most promising absorbents. A full-scale conceptual design has also been developed. Results of the laboratory studies and the conceptual design will be discussed along with plans for further development of this concept

Impacts of chain accidents in petroleum refineries; Impactos de acidentes em cadeia em refinarias de petroleo

Energy Technology Data Exchange (ETDEWEB)

Alencar, Joao Rui Barbosa de [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE)]|[Laboratorio Farmaceutico do Estado de Pernambuco S/A - LAFEPE, PE (Brazil); Barbosa, Ricardo Augusto P. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil)]|[IESA - Internacional de Engenharia S.A. , Rio de Janeiro, RJ (Brazil); Souza Junior, Mauricio Bezerra de [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil)]|[IESA Projetos, Equipamentos e Montagens S.A. , Rio de Janeiro, RJ (Brazil)

2004-07-01

The term domino effect denotes a chain of accidents, or situations in which a fire/explosion load generated by an accident in one unit in an industry causes secondary and higher order accidents in other units. Such chains of accidents have a greater propensity to cause damage than stand-alone accidents. This work illustrates the application of models to evaluate the impacts of events with fire and explosion in LPG tanks on other similar units in the park and the possibility of occurrence of a domino effect. The criteria for occurrence of accidents with domino effect adopted in this work, were 37,5 kW/m2 in case of fire radiation and an overpressure of 0,7 atm in explosion cases in a receptor body. The spacing between LPG tanks was evaluated. The results show that such spacing is minimal and doesn't represent, as it should, a parameter indicating a safe distance able to prevent the propagation of an accident with domino effect. (author)

Radiation shielding provided by residential houses in Japan in reactor accidents accompanied with atmospheric release

International Nuclear Information System (INIS)

Yamaguchi, Yasuhiro; Minami, Kentaro

1991-01-01

The present report describes the radiation shielding effect of houses in Japan against the radioactive cloud resulting from a major reactor accident accompanied with atmospheric release. The shielding factor of houses, the ratio of indoor exposure rate to outdoor one, has been studied for the semi-infinite and finite clouds which contain γ-emitting radionuclides released from a reactor facility. The shielding factor of houses against γ-rays from the radioactive cloud decreases gradually with release delay time and keeps a minimum during the period from 50 to 1000 hours after reactor shutdown while 133 Xe predominates in the cloud. Radioiodines mixed in the cloud raise slightly the shielding factor, and the factor depends little on the shape of the cloud. A set of shielding factors for the use of emergency planning was consequently proposed as 0.4 for simple ferroconcrete residential house and 0.9 for other ordinary ones. (author)

Containment response and radiological release for a TMLB' accident sequence in a large dry containment

International Nuclear Information System (INIS)

Gasser, R.D.; Bieniarz, P.P.; Tills, J.L.

1987-01-01

An analysis has been performed for the Bellefonte Pressurized Water Reactor (PWR) Unit 1 to determine the containment loading and the radiological releases into the environment from a station blackout accident. A number of issues have been addressed in this analysis, which include the effects of direct heating on containment loading and the effects of fission product heating and natural convection on releases from the primary system. The results indicate that direct heating, which involves more than about 50% of the core, may fail the Bellefonte containment, but natural convection in the Reactor Coolant System (RCS) may lead to overheating and failure of the primary system piping before core slump, thus, eliminating or mitigating direct heating. Releases from the primary system are significantly increased before vessel breach, due to natural circulation, and after vessel breach, due to reevolution of retained fission products by fission product heating of RCS structures. (orig.)

Impact of rainstorm and runoff modeling on predicted consequences of atmospheric releases from nuclear reactor accidents

International Nuclear Information System (INIS)

Ritchie, L.T.; Brown, W.D.; Wayland, J.R.

1980-05-01

A general temperate latitude cyclonic rainstorm model is presented which describes the effects of washout and runoff on consequences of atmospheric releases of radioactive material from potential nuclear reactor accidents. The model treats the temporal and spatial variability of precipitation processes. Predicted air and ground concentrations of radioactive material and resultant health consequences for the new model are compared to those of the original WASH-1400 model under invariant meteorological conditions and for realistic weather events using observed meteorological sequences. For a specific accident under a particular set of meteorological conditions, the new model can give significantly different results from those predicted by the WASH-1400 model, but the aggregate consequences produced for a large number of meteorological conditions are similar

Radiation doses from contaminated food after a nuclear accident

International Nuclear Information System (INIS)

Nielsen, S.P.; Oehlenschlaeger, M.

1991-03-01

This report presents estimates of radiation doses from contaminated food after a hypothetical accident at a nuclear power plant. The calculations are made from assumptions intended to represent Swedish conditions. The accident scenario is based on a hypothetical core melt in a nuclear power reactor followed by a release to the atmosphere of iodine and caesium corresponding to 0.6% of the Forsmark unit 3 core inventory. The results are expressed in terms of average effective doses from contaminated food to individuals in the critical group living near the power plant, 2 km from the point of release, and living from locally produced foodstuffs. The calculations are made for a winter release and a summer release, and for dry and rainy conditions. Dynamic radioecological models are used, which have been developed from Danish experience with readioactive fallout from nuclear weapons testing and with fallout from the Chernobyl accident. The accidental release is estimated to cause doses in the summer season from 131 I of circa 200 mSv to children and circa 30 mSv to adults based on a deposition during dry conditions of 11 MBq 131 I m -2 . The dosed from 134 Cs and 137 Cs are estimated at circa 20 mSv to children and adults in case of winter release and circa 160 mSv in case of summer release based on a deposition during dry conditions of 0.5 MBQ 134 Cs and 0.4 MBq 137 Cs m -2 . The main reason for the large difference between the winter and the summer releases is the high sensitivity of cerals to direct contamination on month prior to harvest. In case of precipitation the doses are estimated at twice those for dry conditons. (author) 8 tabs., 16 ills., 13 refs

[Hypoglycemia as a cause of traffic accidents].

Science.gov (United States)

Metter, D

1989-05-01

Hypoglycemia is the most important subsidiary effect of insulin therapy, where traffic medicine is concerned. A study has been made of 8 motor car drivers each dependent on insulin and involved in road accidents. The evidence was issued during the trial. The questions set out to prove if there was a state of hypoglycemia and if the afflicted could have foreseen this condition. In 5 cases the driving conduct before the accidents was evident in cordinatory disturbances, which resulted in sinuous driving. The accidents all happened in every-day traffic conditions, namely counter traffic (3), front-end collision (3) and through disregard of right-of-way at cross-roads (1). A further accident was conditioned by an alcoholic state while parking in a car-park. The disturbances in consciousness conditioned by hypoglycemia occurred without warning. In 3 cases the predictability (in legal terms Actio libera in causa) had to be conceded, because the drivers had set out on their routes despite warning signals or insufficient intake of nourishment beforehand.

Revisiting Ulchin 4 SGTR Accident - Analysis for EOP Improvement

Energy Technology Data Exchange (ETDEWEB)

Lee, Eun-Hye; Lee, Wook-Jo; Jerng, Dong-Wook [Chung-Ang University, Seoul (Korea, Republic of)

2016-10-15

The Steam Generator Tube Ruputure (SGTR) is an accident that U-tube inside the SG is defected so that the reactor coolant releases through broken U-tube and this is one of design basis accidents. Operating the Nuclear Power Plants (NPP), maintaing the integrity of core and preventing radiation release are most important things. Because of risks, many researchers have studied scenarios, impacts and the ways to mitigate SGTR accidents. The study to provide an experimental database of aerosol particle retention and to develop models to support accident management interventions during SGTR was performed. The scaled-down models of NPP were used for experiments, also, MELCOR and SCDAP/RELAP5 were used to simulate a design basis SGTR accident. This study had a major role to resolve uncertainties of various physical models for aerosol mechanical resuspension. The other study which analyzed SGTR accident for System-integrated Modular Advanced Reactor (SMART) was performed. In this analysis, the amount of break flow was focused and TASS/SMRS code was used. It assumed that maximum leak was generated, and found that high RCS pressure, low core inlet coolant temperature, and low break location of the SG cassette contributed to leakage. Although the leakage was large, there was no direct release to atmosphere because the pressure of secondary loop was maintained below the safety relief valve set point. In this analysis, comparison of mitigating procedure when SGTR occurs between shutdown condition and full power condition was performed. In shutdown condition, the core uncovery would not take place in 16 hours whether the cooling procedures are performed or not. Therefore, the integrated amount of break flow should be considered only. In this point of view, cooling through intact SG only, case 3, is the best way to minimize the amount of break flow. In full power condition, the core water level is changed due to high reactor power. The important thing to protect NPP is to keep

The accident at the Three Mile Island nuclear power plant

International Nuclear Information System (INIS)

Butragueno, J.L.

1980-01-01

The sequence of events in the Three Mile Island, Unit 2, accident on the March 28, 1979 is analyzed. In this plant a loss of feed-water transient became a small LOCA that caused a serious core damage. A general emergency situation was declared after uncontrolled radioactive releases were detectec. (author)

Atmospheric releases from severe nuclear accidents: Environmental transport and pathways to man: Modelling of radiation doses to man from Chernobyl releases

International Nuclear Information System (INIS)

Anspaugh, L.R.; Goldman, M.; Catlin, R.J.

1987-01-01

The Chernobyl accident released a large amount of highly fractionated radioactive debris, including approximately 89 PBq of 137 Cs. We calculated the resulting collective dose commitment to the Northern Hemisphere via the pathways of external exposure and ingestion of radionuclides withd food. We developed a rural/urban model of external dose and we used the PATHWAY model for ingestion. The results are a collective dose commitment of 630,000 person-Gy over the first year and 1,200,000 person-Gy over 50 years. 13 refs., 1 tab

Sensitivity analysis for CORSOR models simulating fission product release in LOFT-LP-FP-2 severe accident experiment

Energy Technology Data Exchange (ETDEWEB)

Hoseyni, Seyed Mohsen [Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Dept. of Basic Sciences; Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Young Researchers and Elite Club; Pourgol-Mohammad, Mohammad [Sahand Univ. of Technology, Tabriz (Iran, Islamic Republic of). Dept. of Mechanical Engineering; Yousefpour, Faramarz [Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of)

2017-03-15

This paper deals with simulation, sensitivity and uncertainty analysis of LP-FP-2 experiment of LOFT test facility. The test facility simulates the major components and system response of a pressurized water reactor during a LOCA. MELCOR code is used for predicting the fission product release from the core fuel elements in LOFT LP-FP-2 experiment. Moreover, sensitivity and uncertainty analysis is performed for different CORSOR models simulating release of fission products in severe accident calculations for nuclear power plants. The calculated values for the fission product release are compared under different modeling options to the experimental data available from the experiment. In conclusion, the performance of 8 CORSOR modeling options is assessed for available modeling alternatives in the code structure.

High-speed radiation dose calculations for severe accidents using INDOS

International Nuclear Information System (INIS)

Davidson, G.R.; Godin-Jacqmin, L.J.; Raines, J.C.

1992-01-01

The computer code INDOS (in-plant dose) has been developed for the high-speed calculation of in-plant radiation dose rates and doses during and/or due to a severe accident at a nuclear power plant. This paper describes the current capabilities of the code and presents the results of calculations for several severe-accident scenarios. The INDOS code can be run either as a module of MAAP, a code widely used in the nuclear industry for simulating the response of a light water reactor system during severe accidents, or as a stand-alone code using output from an alternative companion code. INDOS calculates gamma dose rates and doses in major plant compartments caused by airborne and deposited fission products released during an accident. The fission product concentrations are determined by the companion code

U.S. nuclear industry approach to severe accident management guidance, development and implementation

International Nuclear Information System (INIS)

Modeen, D.; Walsh, L.; Oehlberg, R.

1991-01-01

The purpose of this paper is to discuss the US nuclear industry activities, occurring under the auspices of Nuclear Management and Resources Council (NUMARC), to define, develop and implement enhancements to utility accident management capabilities. This effort consists of three major parts: (1) Development of a practical framework for evaluation of plant-specific accident management capabilities and the subsequent implementation of selected enhancements. (2) Development of specific technical guidance that address arresting core damage if it begins, either in-vessel or ex-vessel, and maintaining containment integrity. Preventing inadequate core cooling or minimizing the consequences of offsite releases, while considered to be candidate areas for accident management enhancements, have been the subject of intense previous study and development. (3) Plant-specific implementation of accident management enhancements in three areas: (a) personnel resources (organization, training, communications); (b) systems and equipment (restoration and repair, instrumentation, use of alternatives); and (c) information resources (procedures and guidance, technical information, process information)

Interaction of radionuclides in severe accident conditions

International Nuclear Information System (INIS)

Nagrale, Dhanesh B.; Bera, Subrata; Deo, Anuj Kumar; Paul, U.K.; Prasad, M.; Gaikwad, A.J.

2015-01-01

Nuclear power plants are designed with inherent engineering safety systems and associated operational procedures that provide an in-depth defence against accidents. Radionuclides such as Iodine, Cesium, Tellurium, Barium, Strontium, Rubidium, Molybdenum and many others may get released during a severe accident. Among these, Iodine, one of the fission products, behaviour is significant for the analysis of severe accident consequences because iodine is a chemically more active to the potential components released to the environment. During severe accident, Iodine is released and transported in aqueous, organic and inorganic forms. Iodine release from fuel, iodine transport in primary coolant system, containment, and reaction with control rods are some of the important phases in a severe accident scenario. The behaviour of iodine is governed by aerosol physics, depletion mechanisms gravitational settling, diffusiophoresis and thermophoresis. The presence of gaseous organic compounds and oxidizing compounds on iodine, reactions of aerosol iodine with boron and formation of cesium iodide which results in more volatile iodine release in containment play significant roles. Water radiolysis products due to presence of dissolved impurities, chloride ions, organic impurities should be considered while calculating iodine release. Containment filtered venting system (CFVS) consists of venturi scrubber and a scrubber tank which is dosed with NaOH and NaS_2O_3 in water where iodine will react with the chemicals and convert into NaI and Na_2SO_4. This paper elaborates the issues with respect to interaction of radionuclides and its consideration in modeling of severe accident. (author)

Evaluation of strategies for severe accident prevention and mitigation

International Nuclear Information System (INIS)

Tokarz, R.

1989-01-01

The NRC is planning to establish regulatory oversight on severe accident management capability in the US nuclear reactor industry. Accident management includes certain preparatory and recovery measures that can be taken by the plant operating and technical personnel to prevent or mitigate the consequences of a severe accident. Following an initiating event, accident management strategies include measures to (1) prevent core damage, (2) arrest the core damage if it begins and retain the core inside the vessel, (3) maintain containment integrity if the vessel is breached, and (4) minimize offsite releases. Objectives of the NRC Severe Accident Management Program are to assure that technically sound strategies are identified and guidance to implement these strategies is provided to utilities. This paper will describe work performed to date by Pacific Northwest Laboratory (PNL) and Battelle Memorial Institute (BMI) relative to severe accident strategy evaluation, as well as work to be performed and expected results. Working with Brookhaven National Laboratory, PNL evaluated a series of NRC suggested accident management strategies. The evaluation of these strategies was divided between PNL and Brookhaven National Laboratory and a similar paper will be presented by Brookhaven regarding their strategy evaluation. This paper will stress the overall safety issues related to the research and emphasize the strategies that are applicable to major safety issues. The relationship of these research activities to other projects is discussed, as well as planning for future changes in the direction of work to be undertaken

Chernobyl and Fukushima. Similarity and dissimilarity in their cause and outcome

International Nuclear Information System (INIS)

Shibata, Yoshisada

2011-01-01

We compared the two worst nuclear accidents rated INES 7, which occurred at the Chernobyl and the Fukushima Daiichi Nuclear Power Plants. Although the human errors underlie both accidents, the respective causes differed. The accident at Chernobyl was caused by the experiment which resulted in increase in criticality and activity leading to a powerful steam explosion and fire that released a significant fraction of core material into the environment, while that at Fukushima Daiichi was due to the damage to the backup power and containment systems caused by the destructive tsunami waves triggered by the 2011 earthquake off the Pacific coast of Tohoku. The physical health effects of the Chernobyl accident demonstrated so far in general population around Chernobyl are thyroid diseases including cancer in those exposed to the accident in their childhood. The long-term program monitoring for at least 30 years the health conditions of all Fukushima residents will be introduced. (author)

Estimation of the Radiological Consequences of Fukushima Dai-ichi Nuclear Power Plant Accident using MACCS2

Energy Technology Data Exchange (ETDEWEB)

Kim, Sora; Min, Byung-Il; Park, Kihyun; Yang, Byung-Mo; Suh, Kyung-suk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

Three of them have undergone fuel melting and hydrogen explosions. A significant amount of radioactive material was released into the atmosphere from FDNPP and dispersed all over the world. In this study, we assessed the offsite consequences of Fukushima disaster in the region within a 30-km radius of FDNPP using the MELCOR Accident Consequence Code Systems 2(MACCS2) code, which is the Nuclear Regulatory Commission's (NRC's) code. The reflection of the realistic regional characteristics, such as long-term meteorological data, site- and population-specific data, and radiation safety regulatory, is essential to accurately analyze the off-site consequences. The assessment that reflects regional characteristics would contribute to identify main causes of exposure doses and to find the effective countermeasures for minimizing the accidental off-site consequences.

Description of the blowdown test facility COG program on in-reactor fission product release, transport, and deposition under severe accident conditions

International Nuclear Information System (INIS)

Fehrenbach, P.J.; Wood, J.C.

1987-06-01

Loss-of-coolant accidents with additional impairment of emergency cooling would probably result in high fuel temperatures leading to severe fuel damage (SFD) and significant fission product activity would then be transported along the PHTS to the break where a fraction of it would be released and transport under such conditions, there are many interacting and sometimes competing phenomena to consider. Laboratory simulations are being used to provide data on these individual phenomena, such as UO 2 oxidation and Zr-UO 2 interaction, from which mathematical models can be constructed. These are then combined into computer codes to include the interaction effects and assess the overall releases. In addition, in-reactor tests are the only source of data on release and transport of short-lived fission product nuclides, which are important in the consequence analysis of CANDU reactor accidents. Post-test decontamination of an in-reactor test facility also provides a unique opportunity to demonstrate techniques and obtain decontamination data relevant to post-accident rehabilitation of CANDU power reactors. Specialized facilities are required for in-reactor testing because of the extensive release of radioactive fission products and the high temperatures involved (up to 2500 degrees Celsius). To meet this need for the Canadian program, the Blowdown Test Facility (BTF) has been built in the NRU reactor at Chalk River. Between completion of construction in mid-1987 and the first Zircaloy-sheathed fuel test in fiscal year 1987/88, several commissioning tests are being performed. Similarly, extensive development work has been completed to permit application of instrumentation to irradiated fuel elements, and in support of post-test fuel assembly examination. A program of decontamination studies has also been developed to generate information relevant to post-accident decontamination of power reactors. The BTF shared cost test program funded by the COG High Temperature

The importance of prevention with iodine after nuclear accidents

International Nuclear Information System (INIS)

Mornealo, Elena; Chirca, Lucia

2011-01-01

Medical negative consequences of the disastrous accident from the Chernobyl are tangible till present and the thyroid pathology has a special place among them. It is caused by the actions of radioactive iodine and can be greatly minimized by the implementation of prophylaxis with stable iodine. The basic principles, benefits and risks of iodine prophylaxis are reported in this article. (authors)

Dose to man from a hypothetical loss-of-coolant accident at the Rancho Seco Nuclear Power Plant

International Nuclear Information System (INIS)

Peterson, K.R.; Greenly, G.D.

1981-02-01

At the request of the Sacramento Municipal Utilities District, we used our computer codes, MATHEW and ADPIC, to assess the environmental impact of a loss-of-coolant accident at the Rancho Seco Nuclear Power Plant, about 40 kilometres southeast of Sacramento, California. Meteorological input was selected so that the effluent released by the accident would be transported over the Sacramento metropolitan area. With the release rates provided by the Sacramento Municipal Utilities District, we calculated the largest total dose for a 24-hour release as 70 rem about one kilometre northwest of the reactor. The largest total dose in the Sacramento metropolitan area is 780 millirem. Both doses are from iodine-131, via the forage-cow-milk pathway to an infant's thyroid. The largest dose near the nuclear plant can be minimized by replacing contaminated milk and by giving the cows dry feed. To our knowledge, there are no milk cows within the Sacramento metropolitan area

Grundremmingen nuclear power plant: The accident that came from the cold

International Nuclear Information System (INIS)

Anon.

1977-01-01

The accident of January 13, 1977, is shortly described. The power plant was cut off from the network by an extreme temperature drop and high humidity, which caused a break in a number of porcelain insulators of two HV lines. The response of the turbine speed control was delayed, and there was a sudden pressure drop in the primary steam line. Weakly radioactive steam and water were released into the containment without polluting the environment, since all safety systems responded to the accident. (HP) [de

Consequences of severe radioactive releases to Nordic Marine environment

Energy Technology Data Exchange (ETDEWEB)

Iosjpe, M. [Norwegian Radiation Protection Authority (NRPA) (Norway); Isaksson, M. [Univ. of Gothenburg (Sweden); Joensen, H.P. [Froskaparsetur Foeroya. Faroe Islands, Torshavn (Denmark); Lahtinen, J. [Radiation and Nuclear Safety Authority (Finland); Logemann, K. [Univ. of Iceland (Iceland); Palsson, S.E. [Geislavarnir Rikisins (Iceland); Roos, P. [Technical Univ. of Denmark. Risoe DTU, Roskilde (Denmark); Suolanen, V. [Technical Research Centre of Finland (Finland)

2013-02-15

chosen release fractions in the study were: iodine 20% (of the total core inventory), caesium 10%, tellurium 10%, strontium 0.5%, ruthenium 0.5%. The considered release event to marine environment were assumed to start ten hours after shutdown of the reactor. Total released amounts of the most important nuclides were estimated to be: 4.85{center_dot}10{sup 17} Bq (I-131), 7.29{center_dot}10{sup 16} Bq (Cs-134) and 4.17{center_dot}10{sup 16} Bq (Cs-137). Due to the highly contaminated sea food, the arising doses to human from a hypothetical severe nuclear power plant accident would be high especially in local sea area. Based on preliminary results, annual individual doses could be ten to some hundreds of millisieverts from local sea area. The most important nuclides were Cs-134, Cs-137 and I-131 causing 96% of the total ingestion dose. In the Baltic Sea area, the arising doses from a severe nuclear power plant accident assumed to happen e.g. at Gulf of Finland, would be about 1/10000 compared to doses in the local sea area. Thus the arising maximum annual individual dose for fish pathway is in the level of 0.1 mSv in the Baltic Sea area. Submarine accident assumed to happen at Icelandic waters, has been analysed in the study. The calculated collective dose rates to man as well as doses to a critical group are significantly lower than doses from natural sources. However, in local considerations dose-rates are significantly higher than the negligible component to the annual individual dose obtained from natural sources (UNSCEAR, 2000) and, therefore, have to be taken into consideration during evaluation of the accident consequences. (Author)

Consequences of severe radioactive releases to Nordic Marine environment

International Nuclear Information System (INIS)

Iosjpe, M.; Isaksson, M.; Joensen, H.P.; Lahtinen, J.; Logemann, K.; Palsson, S.E.; Roos, P.; Suolanen, V.

2013-02-01

release fractions in the study were: iodine 20% (of the total core inventory), caesium 10%, tellurium 10%, strontium 0.5%, ruthenium 0.5%. The considered release event to marine environment were assumed to start ten hours after shutdown of the reactor. Total released amounts of the most important nuclides were estimated to be: 4.85·10 17 Bq (I-131), 7.29·10 16 Bq (Cs-134) and 4.17·10 16 Bq (Cs-137). Due to the highly contaminated sea food, the arising doses to human from a hypothetical severe nuclear power plant accident would be high especially in local sea area. Based on preliminary results, annual individual doses could be ten to some hundreds of millisieverts from local sea area. The most important nuclides were Cs-134, Cs-137 and I-131 causing 96% of the total ingestion dose. In the Baltic Sea area, the arising doses from a severe nuclear power plant accident assumed to happen e.g. at Gulf of Finland, would be about 1/10000 compared to doses in the local sea area. Thus the arising maximum annual individual dose for fish pathway is in the level of 0.1 mSv in the Baltic Sea area. Submarine accident assumed to happen at Icelandic waters, has been analysed in the study. The calculated collective dose rates to man as well as doses to a critical group are significantly lower than doses from natural sources. However, in local considerations dose-rates are significantly higher than the negligible component to the annual individual dose obtained from natural sources (UNSCEAR, 2000) and, therefore, have to be taken into consideration during evaluation of the accident consequences. (Author)

LOA-1: prevent accidents. Quarterly technical progress report, FRSP program - July through September 1981

International Nuclear Information System (INIS)

1981-01-01

Information related to LMFBR reactor safety is presented concerning common cause failures; shutdown by self-activated system; shutdown heat removal system operation; sodium burning; core catcher material interactions; accident release of sodium oxide aerosol; and LMFBR risk assessment

Sodium spray release accident analysis for fast reactor safety studies

International Nuclear Information System (INIS)

Shire, P.R.

1976-10-01

A computer code has been developed to model the effects of postulated sodium spray release from LMFBR piping. The calculation method utilizes gas convection and droplet combustion theory to calculate the pressure and temperature effects in a range of 0 to 21% oxygen. Droplet motion and large aggregate sodium surface area result in rapid release of combustion and sensible heat causing a nearly adiabtic pressure pulse peaking in a matter of seconds. This analytical tool has indicated good agreement with prototypic test data for a range of oxygen concentrations, cell volumes and droplet sizes

Depressurization as an accident management strategy to minimize the consequences of direct containment heating

International Nuclear Information System (INIS)

Hanson, D.J.; Golden, D.W.; Chambers, R.; Miller, J.D.; Hallbert, B.P.; Dobbe, C.A.

1990-10-01

Probabilistic Risk Assessments (PRAs) have identified severe accidents for nuclear power plants that have the potential to cause failure of the containment through direct containment heating (DCH). Prevention of DCH or mitigation of its effects may be possible using accident management strategies that intentionally depressurize the reactor coolant system (RCS). The effectiveness of intentional depressurization during a station blackout TMLB' sequence was evaluated considering the phenomenological behavior, hardware performance, and operational performance. Phenomenological behavior was calculated using the SCDAP/RELAP5 severe accident analysis code. Two strategies to mitigate DCH by depressurization of the RCS were considered. One strategy, called early depressurization, assumed that the reactor head vent and pressurizer power-operated relief valves (PORVs) were latched open at steam generator dryout. The second strategy, called late depression, assumed that the head vent and PORVs were latched open at a core exit temperature of ∼922 K (1200 degree F). Depressurization of the RCS to a low value that may mitigate DCH was predicted prior to reactor pressure vessel breach for both early and late depressurization. The strategy of late depressurization is preferred over early depressurization because there are greater opportunities to recover plant functions prior to core damage and because failure uncertainties are lessened. 22 refs., 38 figs., 6 tabs

Depressurization as an accident management strategy to minimize the consequences of direct containment heating

Energy Technology Data Exchange (ETDEWEB)

Hanson, D.J.; Golden, D.W.; Chambers, R.; Miller, J.D.; Hallbert, B.P.; Dobbe, C.A. (EG and G Idaho, Inc., Idaho Falls, ID (USA))

1990-10-01

Probabilistic Risk Assessments (PRAs) have identified severe accidents for nuclear power plants that have the potential to cause failure of the containment through direct containment heating (DCH). Prevention of DCH or mitigation of its effects may be possible using accident management strategies that intentionally depressurize the reactor coolant system (RCS). The effectiveness of intentional depressurization during a station blackout TMLB' sequence was evaluated considering the phenomenological behavior, hardware performance, and operational performance. Phenomenological behavior was calculated using the SCDAP/RELAP5 severe accident analysis code. Two strategies to mitigate DCH by depressurization of the RCS were considered. One strategy, called early depressurization, assumed that the reactor head vent and pressurizer power-operated relief valves (PORVs) were latched open at steam generator dryout. The second strategy, called late depression, assumed that the head vent and PORVs were latched open at a core exit temperature of {approximately}922 K (1200{degree}F). Depressurization of the RCS to a low value that may mitigate DCH was predicted prior to reactor pressure vessel breach for both early and late depressurization. The strategy of late depressurization is preferred over early depressurization because there are greater opportunities to recover plant functions prior to core damage and because failure uncertainties are lessened. 22 refs., 38 figs., 6 tabs.

Safety against releases in severe accidents. Final report

International Nuclear Information System (INIS)

Lindholm, I.; Berg, Oe.; Nonboel, E.

1997-12-01

The work scope of the RAK-2 project has involved research on quantification of the effects of selected severe accident phenomena for Nordic nuclear power plants, development and testing of a computerised accident management support system and data collection and description of various mobile reactors and of different reactor types existing in the UK. The investigations of severe accident phenomena focused mainly on in-vessel melt progression, covering a numerical assessment of coolability of a degraded BWR core, the possibility and consequences of a BWR reactor to become critical during reflooding and the core melt behavior in the reactor vessel lower plenum. Simulant experiments were carried out to investigate lower head hole ablation induced by debris discharge. In addition to the in-vessel phenomena, a limited study on containment response to high pressure melt ejection in a BWR and a comparative study on fission product source term behaviour in a Swedish PWR were performed. An existing computerised accident management support system (CAMS) was further developed in the area of tracking and predictive simulation, signal validation, state identification and user interface. The first version of a probabilistic safety analysis module was developed and implemented in the system. CAMS was tested in practice with Barsebaeck data in a safety exercise with the Swedish nuclear authority. The descriptions of the key features of British reactor types, AGR, Magnox, FBR and PWR were published as data reports. Separate reports were issued also on accidents in nuclear ships and on description of key features of satellite reactors. The collected data were implemented in a common Nordic database. (au)

Analysis of the 1957-1958 Soviet nuclear accident

International Nuclear Information System (INIS)

Trabalka, J.R.; Eyman, L.D.; Auerbach, S.I.

1980-01-01

The presence of an extensive environmental contamination zone in Chelibinsk Province of the Soviet Union, associated with an accident in the winter of 1957 to 1958 involving the atmospheric release of fission wastes, appears to have been confirmed, primarily by an analysis of the Soviet radioecology literature. The contamination zone is estimated to contain 10(5) to 10(6) curies of strontium-90. A plausible explanation for the incident is the use of now-obsolete techniques for waste storage and cesium-137 isotope separation. Radioactive contamination appears to have resulted in resettlement of the human population from a significant area (100 to 1000 square kilometers). It therefore seems imperative to obtain a complete explanation of the cause (or causes) and consequences of the accident; Soviet experience gained in the application of corrective measures would be invaluable to the world nuclear community

The estimation economic impacts from severe accidents of a nuclear power plant

International Nuclear Information System (INIS)

Jeong, J. T.; Jeong, W. D.

2001-01-01

The severe accidents of a nuclear power plant may cause health effects in the exposed population and societal economic impacts or costs. Techniques to assess the consequences of an accident in terms of cost may be applied in studies on the design of plant safety features and in examining countermeasure options as part of emergency planning or in decision making after an accident. In this study, the costs resulting from the severe accidents of a nuclear power plant were estimated for the different combinations of source term release parameters and meteorological data. Also, the costs were estimated for the different scenarios considering seasonal characteristics of Korea. The results can be used as essential inputs in costs/benefit analysis and in developing optimum risk reduction strategies

Caesium releases under the form of silicon micro-balls during the Fukushima-Daiichi accident. Information note

International Nuclear Information System (INIS)

2016-01-01

After having outlined that the most part (89 per cent) of radioactive cesium released in the atmosphere during the Fukushima accident was made under the form of silicon micro-balls which were more irradiating than other aerosols marked by cesium radioactive isotopes, this note first discusses whether these silicon micro-balls containing radioactive cesium were resulting from a specific phase of atmospheric release. It discusses the nature of these micro-balls, and discusses whether it is possible to quantitatively assess the contribution of these micro-balls to global releases and deposits. It discusses how these micro-balls could have formed, whether their formation can be associated with a specific phase of reactor degradation or with the degradation of a specific reactor. It discusses whether a specific behaviour of these micro-balls can be expected in the environment, and their possible impacts on radiological consequences

CARNSORE: Hypothetical reactor accident study

International Nuclear Information System (INIS)

Walmod-Larsen, O.; Jensen, N.O.; Kristensen, L.; Meide, A.; Nedergaard, K.L.; Nielsen, F.; Lundtang Petersen, E.; Petersen, T.; Thykier-Nielsen, S.

1984-06-01

Two types of design-basis accident and a series of hypothetical core-melt accidents to a 600 MWe reactor are described and their consequences assessed. The PLUCON 2 model was used to calculate the consequences which are presented in terms of individual and collective doses, as well as early and late health consequences. The site proposed for the nucelar power station is Carnsore Point, County Wexford, south-east Ireland. The release fractions for the accidents described are those given in WASH-1400. The analyses are based on the resident population as given in the 1979 census and on 20 years of data from the meteorological stations at Rosslare Harbour, 8.5 km north of the site. The consequences of one of the hypothetical core-melt accidents are described in detail in a meteorological parametric study. Likewise the consequences of the worst conceivable combination of situations are described. Finally, the release fraction in one accident is varied and the consequences of a proposed, more probable ''Class 9 accident'' are presented. (author)

Source term and radiological consequence evaluation for nuclear accidents using a 'hand type' methodology

International Nuclear Information System (INIS)

Margeanu, Sorin; Tatiana, Angelescu

2005-01-01

In the last decades, hand type calculations have been replaced by computerized solutions, which are much more accurate, but the preparation of an input to run the code can be a time consuming process and can require a laborious work. This is why, a place for hand calculation based on nomograms still exist in some areas. An example is emergency response to an accidental release of radioactive contaminants when the health of persons close to the accident site might be at risk. In this case, results from computerized accident consequences assessment models may be delayed due to the equipment malfunction or the time required developing minimal input files and performing the calculations (typically more than five minutes). A simple nomogram (developed using computerized dispersion model calculations) can provide dispersion and dose estimates within a minute. The paper presents the methodology used for these 'hand type' calculation and the nomograms, figures and tables used to evaluate the dose to an individual close to the release point. In order to illustrate the use of methodology, a hypothetical severe accident scenario involving 14-MW INR-TRIGA research reactor was considered. (authors)

Key Characteristics of Combined Accident including TLOFW accident for PSA Modeling

Energy Technology Data Exchange (ETDEWEB)

Kim, Bo Gyung; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates)

2015-05-15

The conventional PSA techniques cannot adequately evaluate all events. The conventional PSA models usually focus on single internal events such as DBAs, the external hazards such as fire, seismic. However, the Fukushima accident of Japan in 2011 reveals that very rare event is necessary to be considered in the PSA model to prevent the radioactive release to environment caused by poor treatment based on lack of the information, and to improve the emergency operation procedure. Especially, the results from PSA can be used to decision making for regulators. Moreover, designers can consider the weakness of plant safety based on the quantified results and understand accident sequence based on human actions and system availability. This study is for PSA modeling of combined accidents including total loss of feedwater (TLOFW) accident. The TLOFW accident is a representative accident involving the failure of cooling through secondary side. If the amount of heat transfer is not enough due to the failure of secondary side, the heat will be accumulated to the primary side by continuous core decay heat. Transients with loss of feedwater include total loss of feedwater accident, loss of condenser vacuum accident, and closure of all MSIVs. When residual heat removal by the secondary side is terminated, the safety injection into the RCS with direct primary depressurization would provide alternative heat removal. This operation is called feed and bleed (F and B) operation. Combined accidents including TLOFW accident are very rare event and partially considered in conventional PSA model. Since the necessity of F and B operation is related to plant conditions, the PSA modeling for combined accidents including TLOFW accident is necessary to identify the design and operational vulnerabilities.The PSA is significant to assess the risk of NPPs, and to identify the design and operational vulnerabilities. Even though the combined accident is very rare event, the consequence of combined

[Injuries caused by traffic accidents: passive safety and restraint systems in automobiles].

Science.gov (United States)

Zuppichini, F; Orlandi, E; Genna, M; Rodella, L; Ricci, G; Arienzo, A; Dorrucci, V; Inaspettato, G

1986-10-01

In this article are considered the multiple instruments today employed in cars, in order to prevent or ameliorate the lesions caused to the occupants in case of road accident. The acquisitions in the differentiated structure of the car, in the windshield, in the components of the passenger cell are described, and the peculiar importance of the restraint systems is evidenced.

Biomass accident investigations – missed opportunities for learning and accident prevention

DEFF Research Database (Denmark)

Hedlund, Frank Huess

2017-01-01

The past decade has seen a major increase in the production of energy from biomass. The growth has been mirrored in an increase of serious biomass related accidents involving fires, gas explosions, combustible dust explosions and the release of toxic gasses. There are indications that the number...... of bioenergy related accidents is growing faster than the energy production. This paper argues that biomass accidents, if properly investigated and lessons shared widely, provide ample opportunities for improving general hazard awareness and safety performance of the biomass industry. The paper examines...... selected serious accidents involving biogas and wood pellets in Denmark and argues that such opportunities for learning were missed because accident investigations were superficial, follow-up incomplete and information sharing absent. In one particularly distressing case, a facility saw a repeat accident...

Safety against releases in severe accidents. Final report

Energy Technology Data Exchange (ETDEWEB)

Lindholm, I.; Berg, Oe.; Nonboel, E. [eds.

1997-12-01

The work scope of the RAK-2 project has involved research on quantification of the effects of selected severe accident phenomena for Nordic nuclear power plants, development and testing of a computerised accident management support system and data collection and description of various mobile reactors and of different reactor types existing in the UK. The investigations of severe accident phenomena focused mainly on in-vessel melt progression, covering a numerical assessment of coolability of a degraded BWR core, the possibility and consequences of a BWR reactor to become critical during reflooding and the core melt behavior in the reactor vessel lower plenum. Simulant experiments were carried out to investigate lower head hole ablation induced by debris discharge. In addition to the in-vessel phenomena, a limited study on containment response to high pressure melt ejection in a BWR and a comparative study on fission product source term behaviour in a Swedish PWR were performed. An existing computerised accident management support system (CAMS) was further developed in the area of tracking and predictive simulation, signal validation, state identification and user interface. The first version of a probabilistic safety analysis module was developed and implemented in the system. CAMS was tested in practice with Barsebaeck data in a safety exercise with the Swedish nuclear authority. The descriptions of the key features of British reactor types, AGR, Magnox, FBR and PWR were published as data reports. Separate reports were issued also on accidents in nuclear ships and on description of key features of satellite reactors. The collected data were implemented in a common Nordic database. (au) 39 refs.

Analysis on tank truck accidents involved in road hazardous materials transportation in china.

Science.gov (United States)

Shen, Xiaoyan; Yan, Ying; Li, Xiaonan; Xie, Chenjiang; Wang, Lihua

2014-01-01

Due to the sheer size and capacity of the tanker and the properties of cargo transported in the tank, hazmat tanker accidents are more disastrous than other types of vehicle accidents. The aim of this study was to provide a current survey on the situation of accidents involving tankers transporting hazardous materials in China. Detailed descriptions of 708 tanker accidents associated with hazmat transportation in China from 2004 to 2011 were analyzed to identify causes, location, types, time of occurrence, hazard class for materials involved, consequences, and the corresponding probability. Hazmat tanker accidents mainly occurred in eastern (38.1%) and southwest China (12.3%). The most frequent hazmat tanker accidents involved classes 2, 3, and 8. The predominant accident types were rollover (29.10%), run-off-the-road (16.67%), and rear-end collisions (13.28%), with a high likelihood of a large spill occurring. About 55.93% of the accidents occurred on freeways and class 1 roads, with the spill percentage reaching 75.00% and the proportion of spills that occurred in the total accidents amounting to 77.82%, of which 61.72% are considered large spills. The month with the highest accident probability was July (12.29%), and most crashes occurred during the early morning (4:00-6:00 a.m.) and midday (10:00 a.m.-12:00 p.m.) hours, 19.63% versus 16.10%. Human-related errors (73.8%) and vehicle-related defects (19.6%) were the primary reasons for hazmat tanker crashes. The most common outcomes of a hazmat tanker accident was a spill without further events (55.51%), followed by a release with fire (7.77%), and release with an explosion (2.54%). The safety situation of China's hazmat tanker transportation is grim. Such accidents not only have high spill percentages and consistently large spills but they can also cause serious consequences, such as fires and explosions. Improving the training of drivers and the quality of vehicles, deploying roll stability aids, enhancing

Domino effect in chemical accidents: main features and accident sequences.

Science.gov (United States)

Darbra, R M; Palacios, Adriana; Casal, Joaquim

2010-11-15

The main features of domino accidents in process/storage plants and in the transportation of hazardous materials were studied through an analysis of 225 accidents involving this effect. Data on these accidents, which occurred after 1961, were taken from several sources. Aspects analyzed included the accident scenario, the type of accident, the materials involved, the causes and consequences and the most common accident sequences. The analysis showed that the most frequent causes are external events (31%) and mechanical failure (29%). Storage areas (35%) and process plants (28%) are by far the most common settings for domino accidents. Eighty-nine per cent of the accidents involved flammable materials, the most frequent of which was LPG. The domino effect sequences were analyzed using relative probability event trees. The most frequent sequences were explosion→fire (27.6%), fire→explosion (27.5%) and fire→fire (17.8%). Copyright © 2010 Elsevier B.V. All rights reserved.

Potential consequences in Norway after a hypothetical accident at Leningrad nuclear power plant. Potential release, fallout and predicted impacts on the environment

Energy Technology Data Exchange (ETDEWEB)

Nalbandyan, A.; Ytre-Eide, M.A.; Thoerring, H.; Liland, A.; Bartnicki, J.; Balonov, M.

2012-06-15

The report describes different hypothetical accident scenarios at the Leningrad nuclear power plant for both RBMK and VVER-1200 reactors. The estimated release is combined with different meteorological scenarios to predict possible fallout of radioactive substances in Norway. For a hypothetical catastrophic accident at an RBMK reactor combined with a meteorological worst case scenario, the consequences in Norway could be considerable. Foodstuffs in many regions would be contaminated above the food intervention levels for radioactive cesium in Norway. (Author)

Potential consequences in Norway after a hypothetical accident at Leningrad nuclear power plant. Potential release, fallout and predicted impacts on the environment

International Nuclear Information System (INIS)

Nalbandyan, A.; Ytre-Eide, M.A.; Thoerring, H.; Liland, A.; Bartnicki, J.; Balonov, M.

2012-06-01

The report describes different hypothetical accident scenarios at the Leningrad nuclear power plant for both RBMK and VVER-1200 reactors. The estimated release is combined with different meteorological scenarios to predict possible fallout of radioactive substances in Norway. For a hypothetical catastrophic accident at an RBMK reactor combined with a meteorological worst case scenario, the consequences in Norway could be considerable. Foodstuffs in many regions would be contaminated above the food intervention levels for radioactive cesium in Norway. (Author)

Severe Accident Mitigation by using Core Catcher applicable for Korea standard nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Park, Hae Kyun; Kim, Sang Nyung [Kyung Hee Univ., Yongin (Korea, Republic of)

2013-10-15

Nuclear power plants have been designed and operated in order to prevent severe accident because of their risk that contains tremendous radioactive materials that are potentially hazardous. Moreover, the government requested the nuclear industry to implement a severe accident management strategy for existing reactors to mitigate the risk of potential severe accidents. However, Korea standard nuclear power plant(APR-1400 and OPR-1000) are much more vulnerable for severe accident management than that of developed countries. Due to the design feature of reactor cavity in Korea standard nuclear power plant, inequable and serious Molten Core-Concrete Interaction(MCCI) may cause considerable safety problem to the reactor containment liner. At worst, it brings the release of radioactive materials to the environment. This accident applies to the fourth level of defense in depth(IAEA 1996), 'severe accident'. This study proposes and designs the 'slope' to secure reactor containment liner integrity when the corium spreads out from the destroyed reactor vessel to the reactor cavity due to the core melting accident. For this, make the initial corium distribution evenly exploit the 'slope' on the basis of the study of Ex-vessel corium behavior to prevent inequable and serious MCCI, in order to mitigate severe accident. The viscosity has a dominant position in the calculation. According to the result, the spread out distance on the slope is 10.7146841m, considering the rough surface of the concrete(slope) and margin of reactor cavity end(under 11m). Easy to design, production and economic feasibility are the advantage of the designed slope in this study. However, the slope design may unsuitable when the sequences of the accidents did not satisfy the assumptions as mentioned. Despite of those disadvantages, the slope will show a great performance to mitigate the severe accident. As mentioned in assumption, the corium releasing time property was

Severe Accident Mitigation by using Core Catcher applicable for Korea standard nuclear power plant

International Nuclear Information System (INIS)

Park, Hae Kyun; Kim, Sang Nyung

2013-01-01

Nuclear power plants have been designed and operated in order to prevent severe accident because of their risk that contains tremendous radioactive materials that are potentially hazardous. Moreover, the government requested the nuclear industry to implement a severe accident management strategy for existing reactors to mitigate the risk of potential severe accidents. However, Korea standard nuclear power plant(APR-1400 and OPR-1000) are much more vulnerable for severe accident management than that of developed countries. Due to the design feature of reactor cavity in Korea standard nuclear power plant, inequable and serious Molten Core-Concrete Interaction(MCCI) may cause considerable safety problem to the reactor containment liner. At worst, it brings the release of radioactive materials to the environment. This accident applies to the fourth level of defense in depth(IAEA 1996), 'severe accident'. This study proposes and designs the 'slope' to secure reactor containment liner integrity when the corium spreads out from the destroyed reactor vessel to the reactor cavity due to the core melting accident. For this, make the initial corium distribution evenly exploit the 'slope' on the basis of the study of Ex-vessel corium behavior to prevent inequable and serious MCCI, in order to mitigate severe accident. The viscosity has a dominant position in the calculation. According to the result, the spread out distance on the slope is 10.7146841m, considering the rough surface of the concrete(slope) and margin of reactor cavity end(under 11m). Easy to design, production and economic feasibility are the advantage of the designed slope in this study. However, the slope design may unsuitable when the sequences of the accidents did not satisfy the assumptions as mentioned. Despite of those disadvantages, the slope will show a great performance to mitigate the severe accident. As mentioned in assumption, the corium releasing time property was conservatively calculated

National emergency plan for nuclear accidents

International Nuclear Information System (INIS)

1992-10-01

The national emergency plan for nuclear accidents is a plan of action designed to provide a response to accidents involving the release or potential release of radioactive substances into the environment, which could give rise to radiation exposure to the public. The plan outlines the measures which are in place to assess and mitigate the effects of nuclear accidents which might pose a radiological hazard in ireland. It shows how accident management will operate, how technical information and monitoring data will be collected, how public information will be provided and what measures may be taken for the protection of the public in the short and long term. The plan can be integrated with the Department of Defence arrangements for wartime emergencies

Sensitivity Analysis of Dousing Spray Trip on Radioactive Release in Pressure Tube Rupture Accident with Both End Fitting Failures

Energy Technology Data Exchange (ETDEWEB)

Jang, M. S.; Kang, H. S; Kim, S. R. [NESS, Daejeon (Korea, Republic of)

2015-10-15

We analyzed the sensitivity analysis of dousing spray trip conditions on radioactive release. In terms of conservativeness, the set 1 trip would be more appropriate in RR analysis than set 2 trip, which is the general condition of RR analysis. Radioactive releases from the containment building is related to containment air pressure, which increases by the coolant discharge from loss of coolant accident and the actuation conditions of dousing spray and so on. In LOCA analysis, the dousing spray trip conditions are set for the analysis objectives; for peak pressure (PP), for pressure signal (PS), for radioactive release (RR) and etc. In RR analysis, we would determine the dousing spray trip condition to increase radioactive release to the public for conservatism. Therefore, we carried out the sensitivity analysis of dousing spray trip condition on radioactive release from containment building using GOTHIC and SMART program for CANDU.

Multi-objective evacuation routing optimization for toxic cloud releases

International Nuclear Information System (INIS)

Gai, Wen-mei; Deng, Yun-feng; Jiang, Zhong-an; Li, Jing; Du, Yan

2017-01-01

This paper develops a model for assessing the risks associated with the evacuation process in response to potential chemical accidents, based on which a multi-objective evacuation routing model for toxic cloud releases is proposed taking into account that the travel speed on each arc will be affected by disaster extension. The objectives of the evacuation routing model are to minimize travel time and individual evacuation risk along a path respectively. Two heuristic algorithms are proposed to solve the multi-objective evacuation routing model. Simulation results show the effectiveness and feasibility of the model and algorithms presented in this paper. And, the methodology with appropriate modification is suitable for supporting decisions in assessing emergency route selection in other cases (fires, nuclear accidents). - Highlights: • A model for assessing and visualizing the risks is developed. • A multi-objective evacuation routing model is proposed for toxic cloud releases. • A modified Dijkstra algorithm is designed to obtain an solution of the model. • Two heuristic algorithms have been developed as the optimization tool.

Revised accident source terms for light-water reactors

Energy Technology Data Exchange (ETDEWEB)

Soffer, L. [Nuclear Regulatory Commission, Washington, DC (United States)

1995-02-01

This paper presents revised accident source terms for light-water reactors incorporating the severe accident research insights gained in this area over the last 15 years. Current LWR reactor accident source terms used for licensing date from 1962 and are contained in Regulatory Guides 1.3 and 1.4. These specify that 100% of the core inventory of noble gases and 25% of the iodine fission products are assumed to be instantaneously available for release from the containment. The chemical form of the iodine fission products is also assumed to be predominantly elemental iodine. These assumptions have strongly affected present nuclear air cleaning requirements by emphasizing rapid actuation of spray systems and filtration systems optimized to retain elemental iodine. A proposed revision of reactor accident source terms and some im implications for nuclear air cleaning requirements was presented at the 22nd DOE/NRC Nuclear Air Cleaning Conference. A draft report was issued by the NRC for comment in July 1992. Extensive comments were received, with the most significant comments involving (a) release fractions for both volatile and non-volatile species in the early in-vessel release phase, (b) gap release fractions of the noble gases, iodine and cesium, and (c) the timing and duration for the release phases. The final source term report is expected to be issued in late 1994. Although the revised source terms are intended primarily for future plants, current nuclear power plants may request use of revised accident source term insights as well in licensing. This paper emphasizes additional information obtained since the 22nd Conference, including studies on fission product removal mechanisms, results obtained from improved severe accident code calculations and resolution of major comments, and their impact upon the revised accident source terms. Revised accident source terms for both BWRS and PWRS are presented.

Assessment of risks of accidents and normal operation at nuclear power plants

International Nuclear Information System (INIS)

Savolainen, Ilkka; Vuori, Seppo.

1977-01-01

A probabilistic assessment model for the analysis of risks involved in the operation of nuclear power plants is described. With the computer code ARANO it is possible to estimate the health and economic consequences of reactor accidents both in probabilistic and deterministic sense. In addition the code is applicable to the calculation of individual and collective doses caused by the releases during normal operation. The estimation of release probabilities and magnitudes is not included in the model. (author)

Development of instrumentation systems for severe accidents. 4. New accident tolerant in-containment pressure transducer for containment pressure monitoring system

International Nuclear Information System (INIS)

Oba, Masato; Teruya, Kuniyuki; Yoshitsugu, Makoto; Ikeuchi, Takeshi

2015-01-01

The accident at Tokyo Electric Power Company's Fukushima Dai-ichi Nuclear Power Plant (TF-1 accident) caused severe situations and resulted in a difficulty in measuring important parameters for monitoring plant conditions. Therefore, we have studied the TF-1 accident to select the important parameters that should be monitored at the severe accident and are developing the Severe Accident Instrumentations and Monitoring Systems that could measure the parameters in severe accident conditions. Mitsubishi Heavy Industries, LTD (MHI) developed a new accident tolerant containment pressure monitoring system and demonstrated that the monitoring system could endure extremely harsh environmental conditions that envelop severe accident environmental conditions inside a containment such as maximum operating temperature of up to 300degC and total integrated dose (TID) of 1 MGy gamma. The new containment pressure monitoring system comprises of a strain gage type pressure transducer and a mineral insulated (MI) cable with ceramic connectors, which are located in the containment, and a strain measuring amplifier located outside the containment. Less thermal and radiation degradation is achieved because of minimizing use of organic materials for in-containment equipment such as the transducer and connectors. Several tests were performed to demonstrate the performance and capability of the in-containment equipment under severe accident environmental conditions and the major steps in this testing were run in the following test sequences: (1) the baseline functional tests (e.g., repeatability, non-linearity, hysteresis, and so on) under normal conditions, (2) accident radiation testing, (3) seismic testing, and (4) steam/temperature test exposed to simulated severe accident environmental conditions. The test results demonstrate that the new pressure transducer can endure the simulated severe accident conditions. (author)

Chernobyl accident. Exposures and effects

International Nuclear Information System (INIS)

Bennett, B.; Bouville, A.; Hall, P.; Savkin, M.; Storm, H.

2000-01-01

The Chernobyl accident that occurred in Ukraine in April 1986 happened during an experimental test of the electrical control system as the reactor was being shut down for routine maintenance. The operators, in violation of safety regulations, had switched off important control systems and allowed the reactor to reach unstable, low-power conditions. A sudden power surge caused a steam explosion that ruptured the reactor vessel and allowed further violent fuel-steam interactions that destroyed the reactor and the reactor building. The Chernobyl accident was the most serious to have ever occurred in the nuclear power industry. The accident caused the early death of 30 power plant employees and fire fighters and resulted in widespread radioactive contamination in areas of Belarus, the Russian Federation, and Ukraine inhabited by several million people. Radionuclides released from the reactor that caused exposure of individuals were mainly iodine-131, caesium-134 and caesium-137. Iodine-131 has a short radioactive half-life (8 days), but it can be transferred relatively rapidly through milk and leafy vegetables to humans. Iodine becomes localized in the thyroid gland. For reasons of intake of these foods, size of thyroid gland and metabolism, the thyroid doses are usually greater to infants and children than to adults. The isotopes of caesium have relatively long half-lives (caesium-134: 2 years; caesium-137: 30 years). These radionuclides cause long-term exposures through the ingestion pathway and from external exposure to these radionuclides deposited on the ground. In addition to radiation exposure, the accident caused long-term changes in the lives of people living in the contaminated regions, since measures intended to limit radiation doses included resettlements, changes in food supplies, and restrictions in activities of individuals and families. These changes were accompanied by major economic, social and political changes in the affected countries resulting

Reactor accidents and the environment

International Nuclear Information System (INIS)

Beattie, J.R.; Griffiths, R.F.; Kaiser, G.D.; Kinchin, G.H.

1978-01-01

This is a condensed version of a paper, entitled 'The Environmental Impact of Radioactive Releases from Accidents in Nuclear Power Reactors', by the authors, presented to the Nuclear Energy Panel of the International Atomic Energy Agency/United Nations Environmental Programme. Headings include - Effects of ionising radiation on man; number of deaths expected from leukaemia and other cancers; risk estimates for incidence of benign nodules and thyroid cancer; maximum permissible levels and emergency levels of radiation and radioactivity; ICRP recommended dose limits for members of the general public; atmospheric dispersion and modelling; ICRP emergency reference levels for 1 131 , Cs 137 , Ru 106 and Sr 90 ; environmental consequences of accidental releases from nuclear power reactors; environmental impact of accidents to Magnox gas-cooled reactors; environmental impact of accidents to advanced gas-cooled reactors; environmental impact of accidents to fast reactors; and nature of risks. consequences are examined in terms of early and late biological effects on man, and contamination of land areas. Serious accidents are of low probability of occurrence, and the risk of accidents to nuclear power reactors is estimated to be very small. 43 references. (U.K.)

Airborne concentrations of radioactive materials in severe accidents

International Nuclear Information System (INIS)

Ross, D.F. Jr.; Denning, R.S.

1989-01-01

Radioactive materials would be released to the containment building of a commercial nuclear reactor during each of the stages of a severe accident. Results of analyses of two accident sequences are used to illustrate the magnitudes of these sources of radioactive materials, the resulting airborne mass concentrations, the characteristics of the airborne aerosols, the potential for vapor forms of radioactive materials, the effectiveness of engineered safety features in reducing airborne concentrations, and the release of radioactive materials to the environment. Ability to predict transport and deposition of radioactive materials is important to assessing the performance of containment safety features in severe accidents and in the development of accident management procedures to reduce the consequences of severe accidents

Experimental and theoretical studies on water and gas release from heated concrete

International Nuclear Information System (INIS)

McCormack, J.D.; Postma, A.K.

1977-01-01

Procedures currently used in licensing of nuclear facilities require analysis of postulated accidents which are more severe than ''design basis'' events. For breeder program reactors, some accidents in this severe category involve spillage of sodium coolant onto concrete protected by a steel liner. Heat transfer through the liner heats the concrete, causing a part of the mixing water and other gases to be driven off. These gases would add to pressure in the containment atmosphere, and the water vapor can form hydrogen if it contacts sodium. Evaluations of containment integrity for such postulated accidents will be aided by knowledge of how much water and other gases are released from heated concrete. The report presents results of a research effort at Hanford Engineering Development Laboratory designed to improve understanding of the release of water and gases from heated concrete

Chernobyl accident and Denmark

International Nuclear Information System (INIS)

1986-12-01

The report describes the Chernobyl accident and its consequences for Denmark in particular. It was commissioned by The Secretary of State for the Environment. Volume 2 contains copies of original documents issued by Danish authorities during the first accident phase and afterwards. Evaluations, monitoring data, press releases, legislation acts etc. are included. (author)

Chernobyl accident and Danmark

International Nuclear Information System (INIS)

1986-12-01

The report describes the Chernobyl accident and its consequences for Denmark in particular. It was commissioned by the Secretary of State for the Environment. Volume 1 contains copies of original documents issued by Danish authorities during the first accident phase and afterwards. Evaluations, monitoring data, press releases, legislation acts etc. are included. (author)

Sodium spray release accident analysis for fast reactor safety studies

International Nuclear Information System (INIS)

Shire, P.R.

1976-01-01

A computer code has been developed to model the effects of postulated sodium spray release from LMFBR piping, although this is an event of extremely low probability. The calculation method utilizes gas convection and droplet combustion theory to calculate the pressure and temperature effects in a range of 0 to 21 mole percent oxygen with humidity. Droplet motion and large aggregate sodium surface area result in rapid release of combustion and sensible heat causing a nearly adiabatic pressure rise which peaks in several seconds. This analytical tool has indicated reasonable agreement with prototypic test data for a range of oxygen and water vapor concentrations, cell volumes and droplet sizes

Phenomenological uncertainty analysis of containment building pressure load caused by severe accident sequences

International Nuclear Information System (INIS)

Park, S.Y.; Ahn, K.I.

2014-01-01

Highlights: • Phenomenological uncertainty analysis has been applied to level 2 PSA. • The methodology provides an alternative to simple deterministic analyses and sensitivity studies. • A realistic evaluation provides a more complete characterization of risks. • Uncertain parameters of MAAP code for the early containment failure were identified. - Abstract: This paper illustrates an application of a severe accident analysis code, MAAP, to the uncertainty evaluation of early containment failure scenarios employed in the containment event tree (CET) model of a reference plant. An uncertainty analysis of containment pressure behavior during severe accidents has been performed for an optimum assessment of an early containment failure model. The present application is mainly focused on determining an estimate of the containment building pressure load caused by severe accident sequences of a nuclear power plant. Key modeling parameters and phenomenological models employed for the present uncertainty analysis are closely related to the in-vessel hydrogen generation, direct containment heating, and gas combustion. The basic approach of this methodology is to (1) develop severe accident scenarios for which containment pressure loads should be performed based on a level 2 PSA, (2) identify severe accident phenomena relevant to an early containment failure, (3) identify the MAAP input parameters, sensitivity coefficients, and modeling options that describe or influence the early containment failure phenomena, (4) prescribe the likelihood descriptions of the potential range of these parameters, and (5) evaluate the code predictions using a number of random combinations of parameter inputs sampled from the likelihood distributions

The main results of fulfilment in 1996 of the scientific part of the State programme of the Republic of Belarus for minimization and overcoming of the Chernobyl NPP accident consequences (1996-2000)

International Nuclear Information System (INIS)

Konoplya, E.F.

1997-01-01

In the publication are summarized the basic results of the researches executed in 1996 in the framework of the 'Scientific maintenance of the decision of problems of the Chernobyl NPP accident consequences' of the State program of Republic of Belarus for minimization and overcoming of the Chernobyl NPP accident consequences on 1996-2000 on the following directions: dose monitoring of the population, estimation and forecast of both collective irradiation dozes and risks of radiation induced diseases; development and optimization of a complex of measures for effective land use and decrease of radioactive contamination of agricultural production in order to reduce irradiation dozes of the population; development of complex technologies and means of decontamination, processing and burial of radioactive wastes; development of the measures for increase of radiation protection of the population of Belarus during of the reducing period after the Chernobyl accident; development of complex system of an estimation and decision-making on problems of radiation protection of the population living on contaminated territories; study of influence of radiological consequences of the Chernobyl accident on health of people, development of methods and means of diagnostics, treatment and preventive maintenance of diseases for various categories of the victims; development of effective methods of preventive maintenance and treatment of diseases of both mother and child in conditions of influence of the Chernobyl NPP accident consequences; study of genetic consequences caused by the Chernobyl accident and development of effectual measures of their prevention; creation of the effective both prophylactic means and food additives for treatment and rehabilitation of the persons having suffered after the Chernobyl accident; study of the radioisotopes behaviour dynamics in environment (air, water, ground), ecosystems and populated areas; optimization of the system of radiation ecological

Prevention of radiation accidents and their consequences

International Nuclear Information System (INIS)

Khiski, J.

1976-01-01

Clearing out reasons for nuclear accidents enables to take effective measures to minimize them. The number of accidents in 1957 - 1974 is given. The frequency of accidents at various working places, while operating with various radioisotopes is presented. The analysis of accidents and the confirmation of these estimates can lead to the generalization of data and to the formulation of preventive measures [ru

Medical aspects of radiation accidents

International Nuclear Information System (INIS)

Messerschmidt, O.

1990-01-01

Reactor accidents and nuclear bomb explosions are compared including the release of radioactivity in an accident, results of risk studies, emergency measures of nuclear power plants, and evacuation of the population. The medical aspects refer to the prophylaxies of the thyroid gland, contamination and decontamination of body surfaces, recommendations of the ICRP, radiation injury after total body exposure and medical problems after a reactor accident. (DG)

What you find is not always what you fix--how other aspects than causes of accidents decide recommendations for remedial actions.

Science.gov (United States)

Lundberg, Jonas; Rollenhagen, Carl; Hollnagel, Erik

2010-11-01

In accident investigation, the ideal is often to follow the principle "what-you-find-is-what-you-fix", an ideal reflecting that the investigation should be a rational process of first identifying causes, and then implement remedial actions to fix them. Previous research has however identified cognitive and political biases leading away from this ideal. Somewhat surprisingly, however, the same factors that often are highlighted in modern accident models are not perceived in a recursive manner to reflect how they influence the process of accident investigation in itself. Those factors are more extensive than the cognitive and political biases that are often highlighted in theory. Our purpose in this study was to reveal constraints affecting accident investigation practices that lead the investigation towards or away from the ideal of "what-you-find-is-what-you-fix". We conducted a qualitative interview study with 22 accident investigators from different domains in Sweden. We found a wide range of factors that led investigations away from the ideal, most which more resembled factors involved in organizational accidents, rather than reflecting flawed thinking. One particular limitation of investigation was that many investigations stop the analysis at the level of "preventable causes", the level where remedies that were currently practical to implement could be found. This could potentially limit the usefulness of using investigations to get a view on the "big picture" of causes of accidents as a basis for further remedial actions. 2010 Elsevier Ltd. All rights reserved.

Mitigation of strontium and ruthenium release in the CANDU primary heat transport system

International Nuclear Information System (INIS)

McFarlane, J.

1998-03-01

In certain severe accident scenarios, low-volatility fission products can appear to contribute significantly to dose, if treated with undue conservatism. Hence a survey was performed, to see if factors that may mitigate release of strontium and ruthenium could be incorporated into safety analyses, to cover parameters such as location in the fuel matrix under normal operating conditions, release from fuel, transport and deposition in the primary heat transport system and chemistry. In addition chemical equilibrium calculations were performed to investigate the volatility of strontium and ruthenium in the presence of uranium and important fission products. Strontium is very soluble in the U0 2 fuel, up to 12 atom %, and hence release is improbable, particularly under oxidizing conditions until volatilization of the fuel matrix itself occurs. Ruthenium, however, can be released at low temperatures, but only under oxidizing conditions. These may occur during a fuel-handling accident or as a result of an end-fitting failure. Under these conditions, the primary heat transport system cannot be credited for retention. The volatile form of ruthenium, RuO 4 (g), is thermally unstable above 381 K and decomposes to RuO 2 (s) and O 2 (g) upon contact with surfaces, a factor that is likely to minimize the release of ruthenium into the environment. (author)

Environmental behavior of the radionuclides released from the Fukushima Daiichi Nuclear Power Plant accident

International Nuclear Information System (INIS)

Yamazaki, Hideo

2014-01-01

The environmental behavior of radioactive nuclides released from the Fukushima Daiichi Nuclear Power Station (FDNPS) accident in eastern Japan was investigated. The radioactive pollution of environmental samples, including airborne dust, soil, sediment, fish, and other organisms was described. It was evaluated for environmental behavior and fate of the radioactive material from the spatial and temporal distribution of the radioactive nuclides. In Higashiosaka City about 600 km away from FDNPS, it begins to detect the radioactive nuclides in the airborne dust from 25th March 2011. Radioactive fission products 95 Zr- 95 Nb was detected on 18th April. The concentrations of 131 I, 134 Cs, and 137 Cs in the soil collected from Fukushima City were 126000, 14000, and 14200 Bq/kg on 19th March 2011 and 12800, 13200, and 13700 Bq/kg on 26th March 2011, respectively. The concentrations of 131 I, 134 Cs, and 137 Cs in the soil samples collected from March-June 2011 from study sites in metropolitan area and Kanto region ranged from nd to 91900, 59 to 16100, and 69 to 17600 Bq/kg, respectively. (Concentrations of 131 I were done decay correction to the value of 16th March) Radioactivities in fish samples collected from off FDNPS, Tokyo Bay, and Kejonuma Pond were measured. The radioactive contamination of forest ecosystem was also investigated. Two processes are involved in the radioactive contamination of the environment from the FDNPS accident. One is contamination by radioactive nuclides released from the hydrogen explosion. Leakage of contaminated cooling water to the ocean is in other important environmental pollution. We must continue carefully monitoring of radioactive nuclides in the environment. (author)

Assessment of fission product release from the reactor containment building during severe core damage accidents in a PWR

International Nuclear Information System (INIS)

Fermandjian, J.; Evrard, J.M.; Generino, G.

1984-07-01

Fission product releases from the RCB associated with hypothetical core-melt accidents ABβ, S 2 CDβ and TLBβ in a PWR-900 MWe have been performed using French computer codes (in particular, the JERICHO Code for containment response analysis and AEROSOLS/B1 for aerosol behavior in the containment) related to thermalhydraulics and fission product behavior in the primary system and in the reactor containment building

Historical analysis of US pipeline accidents triggered by natural hazards

Science.gov (United States)

Girgin, Serkan; Krausmann, Elisabeth

2015-04-01

Natural hazards, such as earthquakes, floods, landslides, or lightning, can initiate accidents in oil and gas pipelines with potentially major consequences on the population or the environment due to toxic releases, fires and explosions. Accidents of this type are also referred to as Natech events. Many major accidents highlight the risk associated with natural-hazard impact on pipelines transporting dangerous substances. For instance, in the USA in 1994, flooding of the San Jacinto River caused the rupture of 8 and the undermining of 29 pipelines by the floodwaters. About 5.5 million litres of petroleum and related products were spilled into the river and ignited. As a results, 547 people were injured and significant environmental damage occurred. Post-incident analysis is a valuable tool for better understanding the causes, dynamics and impacts of pipeline Natech accidents in support of future accident prevention and mitigation. Therefore, data on onshore hazardous-liquid pipeline accidents collected by the US Pipeline and Hazardous Materials Safety Administration (PHMSA) was analysed. For this purpose, a database-driven incident data analysis system was developed to aid the rapid review and categorization of PHMSA incident reports. Using an automated data-mining process followed by a peer review of the incident records and supported by natural hazard databases and external information sources, the pipeline Natechs were identified. As a by-product of the data-collection process, the database now includes over 800,000 incidents from all causes in industrial and transportation activities, which are automatically classified in the same way as the PHMSA record. This presentation describes the data collection and reviewing steps conducted during the study, provides information on the developed database and data analysis tools, and reports the findings of a statistical analysis of the identified hazardous liquid pipeline incidents in terms of accident dynamics and

Mitigation of release of volatile iodine species during severe reactor accidents - a novel reliable process of safety technology

International Nuclear Information System (INIS)

Guentay, S.; Bruchertseifer, H.

2010-01-01

In severe accidents, a significant risk for public health may be generated as a result of release of the gaseous iodine species into the environment through the containment leaks or containment venting filter systems with low retention efficiency. The elemental iodine and volatile organic iodides are the main gaseous iodine species in the containment. Potential release of large quantities of gaseous elemental iodine from the reactor coolant system or its radiolytic generation in the containment sump constitute the key source of gaseous elemental iodine in containment atmosphere. Iodine paint reactions as well as the reaction of iodine with organic residuals in sump water are the main mechanisms for the generation of high volatile organic iodides in the containment. Although very much desired, significant research activities conducted in 70's unfortunately did not create any technically feasible solution to mitigate iodine release into the environment under prevailing conditions. Development of a process leading to a fast, comprehensive and reliable retention of volatile iodine species in aqueous solution with an aim to implement for the severe accident management applications has been subject of a research project in the recent years at Paul Scherrer Institut. The process developed utilizes simultaneous use of two customary technical chemical additives in an aqueous solution. The results of the experimental program have demonstrated a fast and reliable destruction of high volatile organic iodine species and fast reduction of elemental iodine into iodide ions in aqueous solutions and an efficient mitigation of the re-formation of gaseous iodine from iodide ions. Investigations covered a broad range of anticipated severe accident conditions in the containment. The project additionally focused on possible application of the process to existing containment venting filter systems, specifically as a passive add-on for back-fitting. This paper describes the process

Accident at the Fukushima Dai-ichi Nuclear Power Stations of TEPCO —Outline & lessons learned—

Science.gov (United States)

TANAKA, Shun-ichi

2012-01-01

The severe accident that broke out at Fukushima Dai-ichi nuclear power stations on March 11, 2011, caused seemingly infinite damage to the daily life of residents. Serious and wide-spread contamination of the environment occurred due to radioactive materials discharged from nuclear power stations (NPSs). At the same time, many issues were highlighted concerning countermeasures to severe nuclear accidents. The accident is outlined, and lessons learned are extracted with respect to the safety of NPSs, as well as radiation protection of residents under the emergency involving the accident. The materials of the current paper are those released by governmental agencies, academic societies, interim reports of committees under the government, and others. PMID:23138450

Accident at the Fukushima Dai-ichi nuclear power stations of TEPCO. Outline and lessons learned

International Nuclear Information System (INIS)

Tanaka, Shun-ichi

2012-01-01

The severe accident that broke out at Fukushima Dai-ichi nuclear power stations on March 11, 2011, caused seemingly infinite damage to the daily life of residents. Serious and wide-spread contamination of the environment occurred due to radioactive materials discharged from nuclear power stations (NPSs). At the same time, many issues were highlighted concerning countermeasures to severe nuclear accidents. The accident is outlined, and lessons learned are extracted with respect to the safety of NPSs, as well as radiation protection of residents under the emergency involving the accident. The materials of the current paper are those released by governmental agencies, academic societies, interim reports of committees under the government, and others. (author)

Risks and benefits of the interventions aimed at minimizing nuclear damage in the Chernobyl accident

International Nuclear Information System (INIS)

Rossiello, L.A.; Failla, L.

1997-01-01

The damages that the absorption of ionizing radiation (i.r.) can cause to humans may be classified as 1) nonstochastic (somatic or deterministic) or 2) stochastic (probabilistic) , which result, for example, from high doses of i.r. absorbed after a serious nuclear accident. Though the Chernobyl case involved both kinds of damage, this paper deals only with stochastic damage risk, and confine our considerations to individuals who were directly Affected and received high i.r. doses. The purpose of this paper is to provide elements on which to base future decisions on the evacuation and return of populations affected by serious nuclear accidents. Unlike the abundant literature on the subject, and as a necessary complement thereto within the bounds of a strict synthesis, to identify the most significant parameters applicable to single individuals rather than to the population at large, and referring solely to risks of stochastic damage

An evaluation of nodalization/decay heat/ volatile fission product release models in ISAAC code

Energy Technology Data Exchange (ETDEWEB)

Song, Yong Mann; Park, Soo Yong; Kim, Dong Ha

2003-03-01

An ISAAC computer code, which was developed for a Level-2 PSA during 1995, has developed mainly with fundamental models for CANDU-specific severe accident progression and also the accident-analyzing experiences are limited to Level-2 PSA purposes. Hence the system nodalization model, decay model and volatile fission product release model, which are known to affect fission product behavior directly or indirectly, are evaluated to both enhance understanding for basic models and accumulate accident-analyzing experiences. As a research strategy, sensitivity studies of model parameters and sensitivity coefficients are performed. According to the results from core nodalization sensitivity study, an original 3x3 nodalization (per loop) method which groups horizontal fuel channels into 12 representative channels, is evaluated to be sufficient for an optimal scheme because detailed nodalization methods have no large effect on fuel thermal-hydraulic behavior, total accident progression and fission product behavior. As ANSI/ANS standard model for decay heat prediction after reactor trip has no needs for further model evaluation due to both wide application on accident analysis codes and good comparison results with the ORIGEN code, ISAAC calculational results of decay heat are used as they are. In addition, fission product revaporization in a containment which is caused by the embedded decay heat, is demonstrated. The results for the volatile fission product release model are analyzed. In case of early release, the IDCOR model with an in-vessel Te release option shows the most conservative results and for the late release case, NUREG-0772 model shows the most conservative results. Considering both early and late release, the IDCOR model with an in-vessel Te bound option shows mitigated conservative results.

40 CFR 68.42 - Five-year accident history.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Five-year accident history. 68.42... (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Hazard Assessment § 68.42 Five-year accident history. (a) The owner or operator shall include in the five-year accident history all accidental releases from...

Nuclear power plant safety - the risk of accidents

International Nuclear Information System (INIS)

Higson, D.; Crancher, D.W.

1975-08-01

Although it is physically impossible for any nuclear plant to explode like an atom bomb, an accidental release of radioactive material into the environment is conceivable. Three factors reduce the probability of such releases, in dangerous quantities, to an extremely low level. Firstly, there are many safety features built into the plant including a leaktight containment building to prevent the escape of such material. Secondly, the quality of engineering and standards used are far more demanding than in conventional power engineering. Thirdly, strict government licensing and regulatory control is enforced at all phases from design through construction to operation. No member of the general public is known to have been injured or died as a result of any accident to a commercial nuclear power plant. Ten workers have died as a result of over-exposure to radiation from experimental reactors and laboratory work connected with the development of nuclear plant since 1945. Because of this excellent safety record the risk of serious accidents can only be estimated. On the basis of such estimates, the chance of an accident in a nuclear power reactor which could cause a detectable increase in the incidence of radiation-induced illnesses would be less than one chance in a million per year. In a typical highly industrialised society, such as the USA, the estimated risk of an individual being killed by such accidents, from one hundred operating reactors, is no greater than one chance in sixteen million per year. There are undoubtedly risks from reactor accidents but estimates of these risks show that they are considerably less than from other activities which are accepted by society. (author)

Source term analysis in severe accident induced by large break loss of coolant accident coincident with ship blackout for ship reactor

International Nuclear Information System (INIS)

Zhang Yanzhao; Zhang Fan; Zhao Xinwen; Zheng Yingfeng

2013-01-01

Using MELCOR code, the accident analysis model was established for a ship reactor. The behaviors of radioactive fission products were analyzed in the case of severe accident induced by large break loss of coolant accident coincident with ship blackout. The research mainly focused on the behaviors of release, transport, retention and the final distribution of inert gas and CsI. The results show that 83.12% of inert gas releases from the core, and the most of inert gas exists in the containment. About 83.08% of CsI release from the core, 72.66% of which is detained in the debris and the primary system, and 27.34% releases into the containment. The results can give a reference for the evaluation of cabin dose and nuclear emergency management. (authors)

Study on the code system for the off-site consequences assessment of severe nuclear accident

Energy Technology Data Exchange (ETDEWEB)

Kim, Sora; Mn, Byung Il; Park, Ki Hyun; Yang, Byung Mo; Suh, Kyung Suk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-12-15

The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents.

Study on the code system for the off-site consequences assessment of severe nuclear accident

International Nuclear Information System (INIS)

Kim, Sora; Mn, Byung Il; Park, Ki Hyun; Yang, Byung Mo; Suh, Kyung Suk

2016-01-01

The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents

Human factors review for Severe Accident Sequence Analysis (SASA)

International Nuclear Information System (INIS)

Krois, P.A.; Haas, P.M.; Manning, J.J.; Bovell, C.R.

1984-01-01

The paper will discuss work being conducted during this human factors review including: (1) support of the Severe Accident Sequence Analysis (SASA) Program based on an assessment of operator actions, and (2) development of a descriptive model of operator severe accident management. Research by SASA analysts on the Browns Ferry Unit One (BF1) anticipated transient without scram (ATWS) was supported through a concurrent assessment of operator performance to demonstrate contributions to SASA analyses from human factors data and methods. A descriptive model was developed called the Function Oriented Accident Management (FOAM) model, which serves as a structure for bridging human factors, operations, and engineering expertise and which is useful for identifying needs/deficiencies in the area of accident management. The assessment of human factors issues related to ATWS required extensive coordination with SASA analysts. The analysis was consolidated primarily to six operator actions identified in the Emergency Procedure Guidelines (EPGs) as being the most critical to the accident sequence. These actions were assessed through simulator exercises, qualitative reviews, and quantitative human reliability analyses. The FOAM descriptive model assumes as a starting point that multiple operator/system failures exceed the scope of procedures and necessitates a knowledge-based emergency response by the operators. The FOAM model provides a functionally-oriented structure for assembling human factors, operations, and engineering data and expertise into operator guidance for unconventional emergency responses to mitigate severe accident progression and avoid/minimize core degradation. Operators must also respond to potential radiological release beyond plant protective barriers. Research needs in accident management and potential uses of the FOAM model are described. 11 references, 1 figure

Experimental investigations relevant for hydrogen and fission product issues raised by the Fukushima accident

Directory of Open Access Journals (Sweden)

Sanjeev Gupta

2015-02-01

Full Text Available The accident at Japan's Fukushima Daiichi nuclear power plant in March 2011, caused by an earthquake and a subsequent tsunami, resulted in a failure of the power systems that are needed to cool the reactors at the plant. The accident progression in the absence of heat removal systems caused Units 1-3 to undergo fuel melting. Containment pressurization and hydrogen explosions ultimately resulted in the escape of radioactivity from reactor containments into the atmosphere and ocean. Problems in containment venting operation, leakage from primary containment boundary to the reactor building, improper functioning of standby gas treatment system (SGTS, unmitigated hydrogen accumulation in the reactor building were identified as some of the reasons those added-up in the severity of the accident. The Fukushima accident not only initiated worldwide demand for installation of adequate control and mitigation measures to minimize the potential source term to the environment but also advocated assessment of the existing mitigation systems performance behavior under a wide range of postulated accident scenarios. The uncertainty in estimating the released fraction of the radionuclides due to the Fukushima accident also underlined the need for comprehensive understanding of fission product behavior as a function of the thermal hydraulic conditions and the type of gaseous, aqueous, and solid materials available for interaction, e.g., gas components, decontamination paint, aerosols, and water pools. In the light of the Fukushima accident, additional experimental needs identified for hydrogen and fission product issues need to be investigated in an integrated and optimized way. Additionally, as more and more passive safety systems, such as passive autocatalytic recombiners and filtered containment venting systems are being retrofitted in current reactors and also planned for future reactors, identified hydrogen and fission product issues will need to be coupled

Emergency feature. Great east Japan earthquake disaster Fukushima Daiichi accident

International Nuclear Information System (INIS)

Kawata, Tomio; Tsujikura, Yonezo; Kitamura, Toshiro

2011-01-01

The Tohoku Pacific Ocean earthquake occurred in March 11, 2011. The disastrous tsunami attacked Fukushima Daiichi nuclear power plants after automatically shutdown by the earthquake and all motor operated pumps became inoperable due to station black out. Despite the strenuous efforts of operators, if caused serious accident such as loss of cooling function, hydrogen explosion and release of large amount of radioactive materials into the environment, leading to nuclear power emergency that ordered resident to evacuate or remain indoors. This emergency feature consisted of four articles. The first was the interview with the president of JAIF (Japan Atomic Industrial Forum) on how to identify the cause of the accident completely, intensify safety assurance measures and promote discussions on a role of nuclear power in the nation's entire energy policy toward the reconstruction. Others were reactor states and events sequence after the accident with trend data of radiation in the reactor site, statement of president of AESJ (Atomic Energy Society of Japan) on nuclear crisis following Tohoku Pacific Ocean earthquake our response and my experience in evacuation life. (T. Tanaka)

Additional investigations on the consequences of accidents

International Nuclear Information System (INIS)

Ehrhardt, J.; Bayer, A.; Burkart, K.

1982-01-01

As a first step to improve the accident consequence model of the German Risk Study within the Phase B, additional investigations on special problems and questions were performed. In detail attention is given to the following topics: emergency protective actions in the vicinity of the site; latent cancer fatalities - allocated to the population living during the nuclear accident and to persons born afterwards, within and beyond a distance of 540 km from the site, caused by radiation doses below the dose limits of the German radiation protection regulations estimated assuming a nonlinear dose response function; risk assessments of nuclear power plants with lower capacities; loss of life expectancy after accidental radiation exposure. All results are presented separately for the 8 release categories of the German Risk Study. (orig.) [de

The Fukushima accident and its consequences. Facts, explanations and comments; L'accident de Fukushima et ses consequences. Faits, explications et commentaires

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-03-06

This document proposes an overview of the present situation in the different reactors of the Fukushima power station and discusses its control by the operator. It also describes what went on, the causes of the accident, and what occurred on the accident day (earthquake, tsunami, flooding). It discusses whether some mistakes regarding the design and the protection of reactors could explain the accident. It presents the various measures which have been immediately implemented to protect the populations and to confine the accident. It proposes an assessment of damages for the ground and marine environment in terms of contamination. It addresses the consequences of the released radioactivity on population health and on personnel intervening within the site. It discusses the restoration perspectives for contaminated areas and the possible return of evacuated population. Then, it describes the different phases for the station dismantling. It evokes the issue of fallouts beyond Japan and in Europe, outlines some lessons learned from the accident and new safety measures to be implemented in France. It discusses how nuclear risk management is organised in France and its efficiency. It addresses the consequences for the development of nuclear energy in the world

COCO-1: model for assessing the cost of offsite consequences of accidental releases of radioactivity

International Nuclear Information System (INIS)

Haywood, S.M.; Robinson, C.A.; Heady, C.

1991-09-01

This report describes a new model, called COCO-1 (Cost Of Consequences Offsite), for assessing the offsite economic consequences of an accident involving the release of radioactive material. The costs calculated are a measure of the benefit foregone as a result of the accident, and in addition to tangible monetary costs the model attempts to include costs arising from the effect of the accident on individuals, for instance the disruption caused by the loss of homes. The approach has limitations, which are discussed, but offers a broadly applicable and robust technique for estimating the economic impact of most accidents. (author)

Minimally invasive soft tissue release of foot and ankle contracture secondary to stroke.

Science.gov (United States)

Boffeli, Troy J; Collier, Rachel C

2014-01-01

Lower extremity contracture associated with stroke commonly results in a nonreducible, spastic equinovarus deformity of the foot and ankle. Rigid contracture deformity leads to gait instability, pain, bracing difficulties, and ulcerations. The classic surgical approach for stroke-related contracture of the foot and ankle has been combinations of tendon lengthening, tendon transfer, osteotomy, and joint fusion procedures. Recovery after traditional foot and ankle reconstructive surgery requires a period of non-weightbearing that is not typically practical for these patients. Little focus has been given in published studies on minimally invasive soft tissue release of contracture. We present the case of a 61-year-old female with an equinovarus foot contracture deformity secondary to stroke. The patient underwent Achilles tendon lengthening, posterior tibial tendon Z lengthening, and digital flexor tenotomy of each toe with immediate weightbearing in a walking boot, followed by transition to an ankle-foot orthosis. The surgical principles and technique tips are presented to demonstrate our minimally invasive approach to release of foot and ankle contracture secondary to stroke. The main goal of this approach is to improve foot and ankle alignment for ease of bracing, which, in turn, will improve gait, reduce the risk of falls, decrease pain, and avoid the development of pressure sores. Copyright © 2014 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Method for consequence calculations for servere accidents

International Nuclear Information System (INIS)

Nielsen, F.

1987-01-01

With the exception of the part about collective doses, this report was commissioned by the Swedish State Power Board. The part about collective doses was commissioned by the Swedish National Institute of Radiation Protection. The report contains a calculation of radiation doses in the sursurroundings caused by a theoretical core meltdown accident at one of the Barsebaeck reactors with filtered venting through the FILTRA plant. The calculations were made by means of the PLUCON4 code. The assumption used for the calculations were givon by the Swedish National Institute of Radiation Protection as follows: Pasquill D with wind speed 3 m/s and a mixing layer at 300 m height. Elevation of the release: 100 m with no energy release. The release starts 12 hours after shut-down and its duration is one hour. The release contains 100% of the noble gasses and 0,1% of all other isotopes in a 1800 MW t -reactor. (author)

Early Outcomes of Minimally Invasive Anterior Longitudinal Ligament Release for Correction of Sagittal Imbalance in Patients with Adult Spinal Deformity

Directory of Open Access Journals (Sweden)

Armen R. Deukmedjian

2012-01-01

Full Text Available The object of this study was to evaluate a novel surgical technique in the treatment of adult degenerative scoliosis and present our early experience with the minimally invasive lateral approach for anterior longitudinal ligament release to provide lumbar lordosis and examine its impact on sagittal balance. Methods. All patients with adult spinal deformity (ASD treated with the minimally invasive lateral retroperitoneal transpsoas interbody fusion (MIS LIF for release of the anterior longitudinal ligament were examined. Patient demographics, clinical data, spinopelvic parameters, and outcome measures were recorded. Results. Seven patients underwent release of the anterior longitudinal ligament (ALR to improve sagittal imbalance. All cases were split into anterior and posterior stages, with mean estimated blood loss of 125 cc and 530 cc, respectively. Average hospital stay was 8.3 days, and mean follow-up time was 9.1 months. Comparing pre- and postoperative 36′′ standing X-rays, the authors discovered a mean increase in global lumbar lordosis of 24 degrees, increase in segmental lumbar lordosis of 17 degrees per level of ALL released, decrease in pelvic tilt of 7 degrees, and decrease in sagittal vertical axis of 4.9 cm. At the last followup, there was a mean improvement in VAS and ODI scores of 26.2% and 18.3%. Conclusions. In the authors’ early experience, release of the anterior longitudinal ligament using the minimally invasive lateral retroperitoneal transpsoas approach may be a feasible alternative in correcting sagittal deformity.

Severe accident progression perspectives based on IPE results

International Nuclear Information System (INIS)

Lehner, J.R.; Lin, C.C.; Pratt, W.T.; Drouin, M.

1996-01-01

Accident progression perspectives were gathered from the level 2 PRA analyses (the analysis of the accident after core damage has occurred involving the containment performance and the radionuclide release from the containment) described in the IPE submittals. Insights related to the containment failure modes, the releases associated with those failure modes, and the factors responsible for the types of containment failures and release sizes reported were obtained. Complete results are discussed in NUREG-1560 and summarized here

Inventory of accidents and losses at sea involving radioactive material

International Nuclear Information System (INIS)

2001-09-01

The present report describes the content of the inventory of accidents and losses at sea involving radioactive material. It covers accidents and losses resulting in the actual release of radioactive materials into the marine environment and also those which have the potential for release. For completeness, records of radioactive materials involved in accidents but which were recovered intact from the sea are also reported. Information on losses of sealed sources resulting in actual or potential release of activity to the marine environment nad of sealed sources that were recovered intact is also presented

Guidelines for calculating radiation doses to the public from a release of airborne radioactive material under hypothetical accident conditions in nuclear reactors

International Nuclear Information System (INIS)

1989-09-01

This Standard provides guidelines and a methodology for calculating effective doses and thyroid doses to people (either individually or collectively) in the path of airborne radioactive material released from a nuclear facility following a hypothetical accident. The specific radionuclides considered in the Standard are those associated with substances having the greatest potential for becoming airborne in reactor accidents (eg, tritium (HTO), noble gases and their daughters (Kr-Rb, Xe-Cs), and radioiodines (I)); and certain radioactive particulates (eg, Cs, Ru, Sr, Te) that may become airborne under exceptional circumstances

Numerical modelling and parametric study of the atmospheric dispersion after radionuclide releases: the Chernobyl accident and the Algeciras incident. Comparison with observation data

International Nuclear Information System (INIS)

Minier, Y.; Mathieu, A.; Quelo, D.; Sportisse, B.; Isnard, O.; Krysta, M.; Bocquet, M.

2006-01-01

Full text: The attempts of modelling the release following upon the Chernobyl accident and the Algeciras incident are reported. Computing power and observation database are used for sensitivity and parametric studies. The meteorological mesoscale model MM5 is nudged with the ERA-40 reanalysis to simulate the meteorological conditions used by the dispersion model, POLAIR3D. In case of the Chernobyl accident the points of interest are many: the representativity of the meteorological simulations is evaluated using observations with a special focus on precipitation events. The radionuclide dispersion, the dry deposition and scavenging simulated by POLAIR3D are compared with European measurements of activities and depositions. Results of the sensitivity studies are done to evaluate the impact of the deposition parameterizations and source-term characteristics (height of release, quantities). The time dynamic of the contaminated cloud is also investigated with regard to the arrival time on different countries. Similarly, for the Algeciras release, sensitivity to the meteorological fields, source term and depletion processes are analyzed. For the available activity concentrations in the air, data-model comparisons are performed. (author)

A summary of the assessment of fuel behaviour, fission product release and pressure tube integrity following a postulated large loss-of-coolant accident

International Nuclear Information System (INIS)

Langman, V.J.; Weaver, K.R.

1984-05-01

The Ontario Hydro analyses of fuel and pressure tube temperatures, fuel behaviour, fission product release and pressure tube integrity for large break loss-of-coolant accidents in Bruce A or Pickering A have been critically reviewed. The determinations of maximum fuel temperatures and fission product release are very uncertain, and pressure tube integrity cannot be assured where low steam flows are predicted to persist for times on the order of minutes

Prediction of fission product and aerosol behaviour during a postulated severe accident in a LWR

International Nuclear Information System (INIS)

Guentay, S.; Aeby, F.; Raguin, M.; Passalacqua, R.

1990-02-01

Lack of appropriate energy removal causes fuel elements in a reactor core to overheat and may eventually cause core to degrade. Fission products will be emitted from a degraded reactor core. Aerosols are generated when the vapours of various fuel and structural materials reach a cold environment and nucleate. In addition to the fission products release and aerosol generation taking place in the reactor vessel, some more fission products release and aerosol generation will occur when the molten core debris leaves the pressure vessel bottom head and comes in contact with the pedestal concrete floor. Fission products, if they are released to environment from the containment boundary, exert a great danger to public health. A source term is defined as the quantity, timing, and characteristics of the release of radionuclide material to the environment following a postulated severe accident. At PSI a considerable effort hase been spent in investigating and establishing a source term assessment methodology in order to predict the source term for a given Light Water Reactor (LWR) accident scenario. This report introduces the computer programs and the methods associated with the release of the fission products, generation of the aerosols and behaviour of the aerosols in LWR compartments used for a source term assessment analysis at PSI. (author) 4 figs., 5 tabs., 28 refs

Preliminary Calculation on a Spent Fuel Pool Accident using GOTHIC

Energy Technology Data Exchange (ETDEWEB)

Park, Jaehwan; Choi, Yu Jung; Hong, Tae Hyub; Kim, Hyeong-Taek [KHNP-CRI, Daejeon (Korea, Republic of)

2015-10-15

The probability of an accident happening at the spent fuel pool was believed to be quite low until the 2011 Fukushima accident occurred. Notably, large amount of spent fuel are normally stored in the spent fuel pool for a long time compared to the amount of fuel in the reactor core and the total heat released from the spent fuel is high enough to boil the water of the spent fuel pool when the cooling system does not operate. In addition, the enrichment and the burnup of the fuel have both increased in the past decade and heat generation from the spent fuel thereby has also increased. The failure of the cooling system at the spent fuel pool (hereafter, a loss-of-cooling accident) is one of the principal hypothetical causes of an accident that could occur at the spent fuel pool. In this paper, the preliminary calculation of a loss-of-cooling accident was performed. In this paper, the preliminary calculation of a loss-of cooling accident was performed with GOTHIC. The calculation results show boiling away of water in the spent fuel pool due to the loss-of-cooling accident and similar thermal performance of the spent fuel pool with previous research results.

Chernobyl accident and Denmark

International Nuclear Information System (INIS)

1986-12-01

The report describes the Chernobyl accident and its consequences for Denmark in particular. It was commissioned by The Secretary of State for the Environment. The event at the accident site, the release and dispersal of radioactive substances into the atmosphere and over Europe, is described. A discussion of the Danish organisation for nuclear emergencies, how it was activated and adapted to the actual situation, is given. A comprehensive description of the radiological contamination in Denmark following the accident and the estimated health effects, is presented. The situation in other European countries is mentioned. (author)

Economic damage caused by a nuclear reactor accident

International Nuclear Information System (INIS)

Goemans, T.; Schwarz, J.J.

1988-01-01

This study is directed towards the estimation of the economic damage which arises from a severe possible accident with a newly built 1000 MWE nuclear power plant in the Netherlands. A number of cases have been considered which are specified by the weather conditions during and the severity of the accident and the location of the nuclear power plant. For each accident case the economic damage has been estimated for the following impact categories: loss of the power plant, public health, evacuation and relocation of population, export of agricultural products, working and living in contaminated regions, decontamination, costs of transportation and incoming foreign tourism. The consequences for drinking water could not be quantified adequately. The total economic damage could reach 30 billion guilders. Besides the power plant itself, loss of export and decreasing incoming foreign tourism determine an important part of the total damage. 12 figs.; 52 tabs

Experimental analysis of the performance of machine learning algorithms in the classification of navigation accident records

Directory of Open Access Journals (Sweden)

REIS, M V. S. de A.

2017-06-01

Full Text Available This paper aims to evaluate the use of machine learning techniques in a database of marine accidents. We analyzed and evaluated the main causes and types of marine accidents in the Northern Fluminense region. For this, machine learning techniques were used. The study showed that the modeling can be done in a satisfactory manner using different configurations of classification algorithms, varying the activation functions and training parameters. The SMO (Sequential Minimal Optimization algorithm showed the best performance result.

Methods and data for HTGR fuel performance and radionuclide release modeling during normal operation and accidents for safety analysis

International Nuclear Information System (INIS)

Verfondern, K.; Martin, R.C.; Moormann, R.

1993-01-01

The previous status report released in 1987 on reference data and calculation models for fission product transport in High-Temperature, Gas-Cooled Reactor (HTGR) safety analyses has been updated to reflect the current state of knowledge in the German HTGR program. The content of the status report has been expanded to include information from other national programs in HTGRs to provide comparative information on methods of analysis and the underlying database for fuel performance and fission product transport. The release and transport of fission products during normal operating conditions and during the accident scenarios of core heatup, water and air ingress, and depressurization are discussed. (orig.) [de

WORK ACCIDENTS ANALYSIS, EMPHASIZING THE FOREST SECTORS, IN A FEDERAL HIGH EDUCATION INSTITUTION

Directory of Open Access Journals (Sweden)

Héder Alencar Vianna

2008-09-01

Full Text Available This research analyzed the probable causes of accidents at work, of the forest sectors, of a Federal Institution of Higher education in Minas Gerais State looking for minimizing risks damages to worker’s health and safety. The analyses were accomplished by means of the Accidents Communications in Service data bank and the results showed that in the studied period, for the forest sector, 50.71% of the accidents were attributed to the insecure act, 16.98% to insecure condition and 17.94% to personal factor of insecurity. The functional evaluation indicated that in 7.14% of the accidents occurred with workers that were not in the function established by the employment respective contracts. The rates of gravity and frequency of accidents calculated for the forest sectors allowed to conclude that the indices were higher than the others sectors and much higher than the values published by the Brazilian Ministry of Social Service and Assistance.

Examination of a measuring method for judging the influence of fallout released by the accident of the Fukushima Dai-ichi NPS

Energy Technology Data Exchange (ETDEWEB)

Onishi, Yuko; Yoshii, Taiki; Kawasaki, Satoru [Japan Nuclear Energy Safety Organization, Nulcear Fuel Cycle and Radioactive Waste Management Safety Dept., Tokyo (Japan)

2012-07-15

Radioactive nuclides were released in the atmosphere by the accident of TEPCO's Fukushima Dai-ichi Nuclear Power Station in March, 2011, and they are detected on the materials that had no artificial radioactive nuclides before the accident. Confronted with this situation, NISA issued a guideline titled 'A guideline regarding treatment of materials in nuclear facilities considering the influence of fallout released from the accident of TEPCO's Fukushima Dai-ichi Nuclear Power Station' on March 30, 2012. The guideline shows that after judging whether there is the influence of fallout or not, the conventional clearance and NR systems can be used when there is no influence of fallout. On the other hand, the special treatment is required when it is judged that there is the influence. This report describes that a specific example of measuring method of the surface contamination of the materials for the judgment of the influence of fallout. 'The precautionary measurement' defined in NR system is useful for the judgment of the influence of fallout. The criterion of the judgment is the theoretical detection limit. Sampling points for the measurement should be selected depending on expected contamination status of the survey target, considering the site area, the states of facilities or equipments and airflow from outside of the facilities. Sampling number for the fallout should be greater than equal to 10. (author)

Examination of a measuring method for judging the influence of fallout released by the accident of the Fukushima Dai-ichi NPS

International Nuclear Information System (INIS)

Onishi, Yuko; Yoshii, Taiki; Kawasaki, Satoru

2012-07-01

Radioactive nuclides were released in the atmosphere by the accident of TEPCO's Fukushima Dai-ichi Nuclear Power Station in March, 2011, and they are detected on the materials that had no artificial radioactive nuclides before the accident. Confronted with this situation, NISA issued a guideline titled 'A guideline regarding treatment of materials in nuclear facilities considering the influence of fallout released from the accident of TEPCO's Fukushima Dai-ichi Nuclear Power Station' on March 30, 2012. The guideline shows that after judging whether there is the influence of fallout or not, the conventional clearance and NR systems can be used when there is no influence of fallout. On the other hand, the special treatment is required when it is judged that there is the influence. This report describes that a specific example of measuring method of the surface contamination of the materials for the judgment of the influence of fallout. 'The precautionary measurement' defined in NR system is useful for the judgment of the influence of fallout. The criterion of the judgment is the theoretical detection limit. Sampling points for the measurement should be selected depending on expected contamination status of the survey target, considering the site area, the states of facilities or equipments and airflow from outside of the facilities. Sampling number for the fallout should be greater than equal to 10. (author)

Method for consequence calculations for severe accidents

International Nuclear Information System (INIS)

Nielsen, F.; Thykier-Nielsn, S.

1987-03-01

This report was commissioned by the Swedish State Power Board. The report contains a calculation of radiation doses in the surroundings caused by a theoretical core meltdown accident at Forsmark reactor No 3. The assumption used for the calculations were a 0.06% release of iodine and cesium corresponding to a 0.1% release through the FILTRA plant at Barsebaeck. The calculations were made by means of the PLUCON4 code. Meteorological data for two years from the Forsmark meteorological tower were analysed to find representative weather situations. As typical weather pasquill D was chosen with wind speed 5 m/s, and as extreme weather, Pasquill F with wind speed 2 m/s. 23 tabs., 36 ills., 21 refs. (author)

Occupational accidents in artisanal mining in Katanga, D.R.C.

Science.gov (United States)

Elenge, Myriam; Leveque, Alain; De Brouwer, Christophe

2013-04-01

This study focuses on accidents in artisanal mining, to support policies improving miners' employability. Based on a questionnaire administered in November 2009 to a sample of 180 miners from the artisanal mining of LUPOTO, in the Province of Katanga, we explored significant trends between the accidents and their consequences and behavioral or sociological variables. During the 12 months preceding the study, 392 accidents occurred, affecting 72.2% of miners. Tools handling represents 51.5%, of the accidents' causes, followed by handling heavy loads (32.9%). Factors such as age, seniority or apprenticeship did not generate significant differences. Contusions were the most common injuries (50.2%), followed by wounds (44.4%). These injuries were located in upper limbs (50.5%) and in lower limbs (29.3%). 80.5% of miners were cared for by their colleagues and 50% of them could not work for more than 3 days. Physical sequelae were reported by 19% of the injured miners. Many surveys related to accidents in the area of artisanal mining report such high frequency. The unsuitability of tools to jobs to be done is usually raised as one of the major causes of accidents. The lack of differentiation of the tasks carried out in relation to age is another factor explaining the lack of protective effect of seniority as it minimizes the contribution of experience in the worker's safety. The apprenticeship reported is inadequate; it is rather a learning by doing than anything else. That is why it lacks protective effect. Low income combined with precariousness of artisanal mining are likely to explain the low level of work stoppages. Tools improvement associated with adequate training seem to be the basis of accident prevention. Availability of suitable medical care should improve artisanal miners' recovery after accidents.

Occupational accidents in artisanal mining in Katanga, D.R.C.

Directory of Open Access Journals (Sweden)

Myriam Elenge

2013-04-01

Full Text Available Introduction: This study focuses on accidents in artisanal mining, to support policies improving miners' employability. Materials and Methods: Based on a questionnaire administered in November 2009 to a sample of 180 miners from the artisanal mining of LUPOTO, in the Province of Katanga, we explored significant trends between the accidents and their consequences and behavioral or sociological variables. Results: During the 12 months preceding the study, 392 accidents occurred, affecting 72.2% of miners. Tools handling represents 51.5%, of the accidents' causes, followed by handling heavy loads (32.9%. Factors such as age, seniority or apprenticeship did not generate significant differences. Contusions were the most common injuries (50.2%, followed by wounds (44.4%. These injuries were located in upper limbs (50.5% and in lower limbs (29.3%. 80.5% of miners were cared for by their colleagues and 50% of them could not work for more than 3 days. Physical sequelae were reported by 19% of the injured miners. Discussion: Many surveys related to accidents in the area of artisanal mining report such high frequency. The unsuitability of tools to jobs to be done is usually raised as one of the major causes of accidents. The lack of differentiation of the tasks carried out in relation to age is another factor explaining the lack of protective effect of seniority as it minimizes the contribution of experience in the worker's safety. The apprenticeship reported is inadequate; it is rather a learning by doing than anything else. That is why it lacks protective effect. Low income combined with precariousness of artisanal mining are likely to explain the low level of work stoppages. Conclusion: Tools improvement associated with adequate training seem to be the basis of accident prevention. Availability of suitable medical care should improve artisanal miners' recovery after accidents.

Industrial Safety and Accidents Prevention

International Nuclear Information System (INIS)

Sajjad Akbar

2006-01-01

Accident Hazards, dangers, losses and risk are what we would to like to eliminate, minimize or avoid in industry. Modern industries have created many opportunities for these against which man's primitive instincts offer no protection. In today's complex industrial environment safety has become major preoccupation, especially after the realization that there is a clear economic incentive to do so. Industrial hazards may cause by human error or by physical or mechanical malfunction, it is very often possible to eliminate the worst consequences of human error by engineering modification. But the modification also needs checking very thoroughly to ensue that it has not introduced some new and unsuspected hazard. (author)

Preventing accidents

Science.gov (United States)

2005-08-01

As the most effective strategy for improving safety is to prevent accidents from occurring at all, the Volpe Center applies a broad range of research techniques and capabilities to determine causes and consequences of accidents and to identify, asses...

Radioactive releases into the environment under accidental conditions

International Nuclear Information System (INIS)

Beninson, D.

1976-01-01

Although accidents involving the release of radioactive materials and the unplanned exposure of people can occur at any stage of the nuclear fuel cycle, most attention has been focused on reactor accidents. Although no power reactor accidents involving exposure of the public have yet occured, it should be recognized that the probability of such accidental releases cannot be reduced to zero. Since the inventory of radioactive materials in power reactors is very large, it is usual to postulate, for safety assessments, that a release of fission products takes place in spite of all protective measures. This postulated release is of importance for reactor siting and for preparing emergency plans. (HP) [de

The nature of reactor accidents

International Nuclear Information System (INIS)

Domaratzki, Z.; Campbell, F.R.; Atchison, R.J.

1981-01-01

Reactor accidents are events which result in the release of radioactive material from a nuclear power plant due to the failure of one or more critical components of that plant. The failures, depending on their number and type, can result in releases whose consequences range from negligible to catastrophic. By way of examples, this paper describes four specific accidents which cover this range of consequence: failure of a reactor control system, loss of coolant, loss of coolant with impaired containment, and reactor core meltdown. For each a possible sequence of events and an estimate of the expected frequency are presented

New system technologies implemented at Kozloduy 3 and 4 (WWER 440-230) for containment leakage and H2 control in severe accident situations - Design, qualification, installation, commissioning

International Nuclear Information System (INIS)

Feuerbach, R.; Eckardt, B.; Kastner, B.

2005-01-01

In order to reduce the residual risk associated with hypothetical severe nuclear accidents, systems and components for filtered containment venting and H 2 reduction were developed. During severe accident scenarios large quantities of hydrogen and radioactive material may be released into the containment atmosphere within a short period of time. In the event of internal over pressurization due to hypothetical severe accident sequences a pressure barrier system has to be created to confine the activity in the containment. Unavoidable releases of activity to the environment have to be minimized to a great extent as possible. Research into the hypothetical event of core melt accidents has continued and new accident mitigation technologies have been developed. Decisions have been taken to implement these new mitigation measures in operating nuclear power plants to mitigate severe accidents consequences. In order to prevent loss of containment integrity as a result of over pressurization, nuclear power plants in the Federal Republic of Germany as well as in most other European countries have been or will be back-fitted with systems for filtered venting of the containment atmosphere and systems for H 2 -control. Similar technologies for containment venting system and H 2 control have been now implemented in the first WWER 440-230 units of Kozloduy 3 and 4. Following OECD recommendations sever accident situations were analyzed and a design of countermeasures have been performed. Main goal of the developed countermeasures was to overcome the WWER 440-230 containment design specifics like, leakage rate behavior, limited available containment volume combined with the feature of high availability of electrical supply at multiple plant sites. Further more the design of counter measures considers the common use for Kozloduy unit 3 and 4. The analysis of postulated severs accident situation - without countermeasures - showed significant increase of H 2 /O 2 concentration in the

Role of BWR secondary containments in severe accident mitigation: issues and insights from recent analyses

International Nuclear Information System (INIS)

Greene, S.R.

1988-01-01

All commercial boiling water reactor (BWR) plants in the US employ primary containments of the pressure suppression design. These primary containments are surrounded and enclosed by a secondary containment consisting of a reactor building and refueling bay (MK I and MK II designs), a shield building, auxiliary building and fuel building (MK III), or an auxiliary building and enclosure building (Grand Gulf style MK III). Although secondary containment designs are highly plant specific, their purpose is to minimize the ground level release of radioactive material for a spectrum of traditional design basis accidents. While not designed for severe accident mitigation, these secondary containments might also reduce the radiological consequences of severe accidents. This issue is receiving increasing attention due to concerns that BWR MK I primary containment integrity would be lost should a significant mass of molten debris escape the reactor vessel during a severe accident. This paper presents a brief overview of domestic BWR secondary containment designs and highlights plant-specific features that could influence secondary containment severe accident survivability and accident mitigation effectiveness. Current issues surrounding secondary containment performance are discussed, and insights gained from recent ORNL secondary containment studies of Browns Ferry, Peach Bottom, and Shoreham are presented. Areas of significant uncertainty are identified and recommendations for future research are presented

Fission product release from HTGR fuel under core heatup accident conditions - HTR2008-58160

International Nuclear Information System (INIS)

Verfondern, K.; Nabielek, H.

2008-01-01

Various countries engaged in the development and fabrication of modern fuel for the High Temperature Gas-Cooled Reactor (HTGR) have initiated activities of modeling the fuel and fission product release behavior with the aim of predicting the fuel performance under operating and accidental conditions of future HTGRs. Within the IAEA directed Coordinated Research Project CRP6 on 'Advances in HTGR Fuel Technology Development' active since 2002, the 13 participating Member States have agreed upon benchmark studies on fuel performance during normal operation and under accident conditions. While the former has been completed in the meantime, the focus is now on the extension of the national code developments to become applicable to core heatup accident conditions. These activities are supported by the fact that core heatup simulation experiments have been resumed recently providing new, highly valuable data. Work on accident performance will be - similar to the normal operation benchmark - consisting of three essential parts comprising both code verification that establishes the correspondence of code work with the underlying physical, chemical and mathematical laws, and code validation that establishes reasonable agreement with the existing experimental data base, but including also predictive calculations for future heating tests and/or reactor concepts. The paper will describe the cases to be studied and the calculational results obtained with the German computer model FRESCO. Among the benchmark cases in consideration are tests which were most recently conducted in the new heating facility KUEFA. Therefore this study will also re-open the discussion and analysis of both the validity of diffusion models and the transport data of the principal fission product species in the HTGR fuel materials as essential input data for the codes. (authors)

Mitigation of strontium and ruthenium release in the CANDU primary heat transport system

Energy Technology Data Exchange (ETDEWEB)

McFarlane, J

1998-03-01

In certain severe accident scenarios, low-volatility fission products can appear to contribute significantly to dose, if treated with undue conservatism. Hence a survey was performed, to see if factors that may mitigate release of strontium and ruthenium could be incorporated into safety analyses, to cover parameters such as location in the fuel matrix under normal operating conditions, release from fuel, transport and deposition in the primary heat transport system and chemistry. In addition chemical equilibrium calculations were performed to investigate the volatility of strontium and ruthenium in the presence of uranium and important fission products. Strontium is very soluble in the U0{sub 2} fuel, up to 12 atom %, and hence release is improbable, particularly under oxidizing conditions until volatilization of the fuel matrix itself occurs. Ruthenium, however, can be released at low temperatures, but only under oxidizing conditions. These may occur during a fuel-handling accident or as a result of an end-fitting failure. Under these conditions, the primary heat transport system cannot be credited for retention. The volatile form of ruthenium, RuO{sub 4}(g), is thermally unstable above 381 K and decomposes to RuO{sub 2}(s) and O{sub 2}(g) upon contact with surfaces, a factor that is likely to minimize the release of ruthenium into the environment. (author)

Fuel behavior and fission product release under HTGR accident conditions

International Nuclear Information System (INIS)

Fukuda, K.; Hayashi, K.; Shiba, K.

1990-01-01

In early 1989 a final decision was made over construction of a 30 MWth HTGR called the High Temperature Engineering Test Reactor, HTTR, in Japan in order to utilize it for high temperature gas engineering tests and various nuclear material tests. The HTTR fuel is a pin-in-block type fuel element which is composed of a hexagonal graphite block with dimension of 580 mm in length and 360 mm in face-to-face distance and about 30 of the fuel rods inserted into the coolant channels drilled in the block. The TRISO coated fuel particles for HTTR are incorporated with graphite powder and phenol resin into the fuel compacts, 19 of which are encased into a graphite sleeve as a fuel rod. It is necessary for the HTTR licensing to prove the fuel stability under predicted accidents related to the high temperature events. Therefore, the release of the fission products and the fuel failure have been investigated in the irradiation---and the heating experiments simulating these conditions at JAERI. This report describes the HTTR fuel behavior at extreme temperature, made clear in these experiments

Accidents in making fireworks. Tapaturmat polttopuun teossa

Energy Technology Data Exchange (ETDEWEB)

Solmio, H

1991-01-01

The accidents and the trends in the number of accidents and their causes were analyzed in a study conducted by the Forestry Department of the Work Efficiency Institute. The study was funded by the Finnish Agricultural Enterpreneurs' Pension Fund (MELA). The study material was selected from MELA's accident stage work and cause code. Altogether, the material comprised the following accidents that occurred while making and using firewood: 671 accidents in 1987 and 596 accidents in 1988. The amount of accidents caused by the working environment and hand tools was clearly higher in 1987 than in 1988. The number of accidents occurred while chopping wood was 20 % higher in 1987 than in 1988. April was the most accident-prone month both in 1987 and in 1988. Chopping of firewood was the most dangerous work stage in terms of the number of accidents. In 1988, the number of accidents in chopping firewood was 336, in sawing using circular saw 97 cases and other mechanized chopping led to 93 accidents. Heating with wood caused 33 accidents. In 1988 there were 10 (2 %) accidents involving loss of limbs and 9 of them occurred in the mechanized chopping of firewood. Nine accidents of these involved the loss of one or more fingers. Serious accidents, leading to inability to work for more than 3 months, were most frequent in chopping and in storing firewood.

Modelling of fission product release behavior from HTR spherical fuel elements under accident conditions

International Nuclear Information System (INIS)

Verfondern, K.; Mueller, D.

1991-01-01

Computer codes for modelling the fission product release behavior of spherical fuel elements for High Temperature Reactors (HTR) have been developed for the purpose of being used in risk analyses for HTRs. An important part of the validation and verification procedure for these calculation models is the theoretical investigation of accident simulation experiments which have been conducted in the KueFA test facility in the Hot Cells at KFA. The paper gives a presentation of the basic modeling and the calculational results of fission product release from modern German HTR fuel elements in the temperature range 1600-1800 deg. C using the TRISO coated particle failure model PANAMA and the diffusion model FRESCO. Measurements of the transient release behavior for cesium and strontium and of their concentration profiles after heating have provided informations about diffusion data in the important retention barriers of the fuel: silicon carbide and matrix graphite. It could be shown that the diffusion coefficients of both cesium and strontium in silicon carbide can significantly be reduced using a factor in the range of 0.02 - 0.15 compared to older HTR fuel. Also in the development of fuel element graphite, a tendency towards lower diffusion coefficients for both nuclides can be derived. Special heating tests focussing on the fission gases and iodine release from the matrix contamination have been evaluated to derive corresponding effective diffusion data for iodine in fuel element graphite which are more realistic than the iodine transport data used so far. Finally, a prediction of krypton and cesium release from spherical fuel elements under heating conditions will be given for fuel elements which at present are irradiated in the FRJ2, Juelich, and which are intended to be heated at 1600/1800 deg. C in the KueFA furnace in near future. (author). 7 refs, 11 figs

Analysis of Fukushima unit 2 accident considering the operating conditions of RCIC system

Energy Technology Data Exchange (ETDEWEB)

Kim, Sung Il, E-mail: sikim@kaeri.re.kr; Park, Jong Hwa; Ha, Kwang Soon; Cho, Song-Won; Song, JinHo

2016-03-15

Highlights: • Fukushima unit 2 accident was analyzed using MELCOR 1.8.6. • RCIC operating conditions were assumed and best case was selected. • Effect of RCIC operating condition on accident scenario was found. - Abstract: A severe accident in Fukushima occurred on March 11, 2011 and units 1, 2 and 3 were damaged severely. A tsunami following an earthquake made the supply of electricity power stop, and the safety systems, which use AC or DC power in plants could not operate properly. It is supposed that the degree of core degradation of unit 2 is less serious than in the other plants, and it was estimated that the operation of reactor core isolation cooling (RCIC) system at the initial stage of the accident minimized the core damage through decay heat removal. Although the operating conditions of the RCIC system are not known clearly, it can be important to analyze the accident scenario of unit 2. In this study, best case of the Fukushima unit 2 accident was presented considering the operating conditions of the RCIC system. The effects of operating condition on core degradation and fission product release rate to environment were also examined. In addition, importance of torus room flooding level in the accident analysis was discussed. MELCOR 1.8.6 was used in this research, and the geometries of plant and operating conditions of safety system were obtained from TEPCO through OECD/NEA BSAF Project.

Operational intervention levels and related requirements on radiation monitoring during pre-release / release phase of an accident

International Nuclear Information System (INIS)

Carny, P.; Cabanekova, H

2003-01-01

In this paper authors discusses required outputs of emergency radiological monitoring in various phases of an accident and rationale of these requirements. In various phases of an accident various intervention levels are important and consequently various radiological quantities should be preferably measured. Distinguished tasks or aims of monitoring in different phases of accident have strong influence on methods of monitoring, instrumentation and capabilities of monitoring groups. Required tasks and outputs of monitoring are discussed

Fuel and control rod failure behavior during degraded core accidents

International Nuclear Information System (INIS)

Chung, K.S.

1984-01-01

As a part of the pretest and posttest analyses of Light Water Reactor Source Term Experiments (STEP) which are conducted in the Transient Reactor Test (TREAT) facility, this paper investigates the thermodynamic and material behaviors of nuclear fuel pins and control rods during severe core degradation accidents. A series of four STEP tests are being performed to simulate the characteristics of the power reactor accidents and investigate the behavior of fission product release during these accidents. To determine the release rate of the fission products from the fuel pins and the control rod materials, information concerning the timing of the clad failure and the thermodynamic conditions of the fuel pins and control rods are needed to be evaluated. Because the phase change involves a large latent heat and volume expansion, and the phase change is a direct cause of the clad failure, the understanding of the phase change phenomena, particularly information regarding how much of the fuel pin and control rod materials are melted are very important. A simple energy balance model is developed to calculate the temperature profile and melt front in various heat transfer media considering the effects of natural convection phenomena on the melting and freezing front behavior

Communication and industrial accidents

NARCIS (Netherlands)

As, Sicco van

2001-01-01

This paper deals with the influence of organizational communication on safety. Accidents are actually caused by individual mistakes. However the underlying causes of accidents are often organizational. As a link between these two levels - the organizational failures and mistakes - I suggest the

Nuclear fuel cycle facility accident analysis handbook

International Nuclear Information System (INIS)

Ayer, J.E.; Clark, A.T.; Loysen, P.; Ballinger, M.Y.; Mishima, J.; Owczarski, P.C.; Gregory, W.S.; Nichols, B.D.

1988-05-01

The Accident Analysis Handbook (AAH) covers four generic facilities: fuel manufacturing, fuel reprocessing, waste storage/solidification, and spent fuel storage; and six accident types: fire, explosion, tornado, criticality, spill, and equipment failure. These are the accident types considered to make major contributions to the radiological risk from accidents in nuclear fuel cycle facility operations. The AAH will enable the user to calculate source term releases from accident scenarios manually or by computer. A major feature of the AAH is development of accident sample problems to provide input to source term analysis methods and transport computer codes. Sample problems and illustrative examples for different accident types are included in the AAH

Assessment of risk due to vehicle accident for the plutonium solution transfer from H-area to F-area

International Nuclear Information System (INIS)

Sarrack, A.G.

1996-09-01

Transporting radioactive material onsite (intrasite transfers) via truck or train must be performed in a safe manner. Adequate safety is assured for each transfer, as documented in the corresponding Onsite Safety Assessment (OSA). One aspect of the OSA is to show that the package to be used for the transfer meets onsite acceptance criteria. The activity being analyzed in this report is the movement of plutonium solution with greater than 20 curies, all reasonable mitigative controls will be implemented to minimize the likelihood of an accidental release, and a probabilistic analysis will be used to evaluate the risk associated with the move. The purpose of this report is to document the evaluation of risk due to vehicle accident associated with transporting plutonium solution from H-area to F-area. Included in the report is a list of the required mitigative controls which reduce the predicted accident and release frequencies to those reported in the summary

The Fukushima accident and its consequences. Facts, explanations and comments

International Nuclear Information System (INIS)

2012-01-01

This document proposes an overview of the present situation in the different reactors of the Fukushima power station and discusses its control by the operator. It also describes what went on, the causes of the accident, and what occurred on the accident day (earthquake, tsunami, flooding). It discusses whether some mistakes regarding the design and the protection of reactors could explain the accident. It presents the various measures which have been immediately implemented to protect the populations and to confine the accident. It proposes an assessment of damages for the ground and marine environment in terms of contamination. It addresses the consequences of the released radioactivity on population health and on personnel intervening within the site. It discusses the restoration perspectives for contaminated areas and the possible return of evacuated population. Then, it describes the different phases for the station dismantling. It evokes the issue of fallouts beyond Japan and in Europe, outlines some lessons learned from the accident and new safety measures to be implemented in France. It discusses how nuclear risk management is organised in France and its efficiency. It addresses the consequences for the development of nuclear energy in the world

Probability analysis of multiple-tank-car release incidents in railway hazardous materials transportation

International Nuclear Information System (INIS)

Liu, Xiang; Saat, Mohd Rapik; Barkan, Christopher P.L.

2014-01-01

Railroads play a key role in the transportation of hazardous materials in North America. Rail transport differs from highway transport in several aspects, an important one being that rail transport involves trains in which many railcars carrying hazardous materials travel together. By contrast to truck accidents, it is possible that a train accident may involve multiple hazardous materials cars derailing and releasing contents with consequently greater potential impact on human health, property and the environment. In this paper, a probabilistic model is developed to estimate the probability distribution of the number of tank cars releasing contents in a train derailment. Principal operational characteristics considered include train length, derailment speed, accident cause, position of the first car derailed, number and placement of tank cars in a train and tank car safety design. The effect of train speed, tank car safety design and tank car positions in a train were evaluated regarding the number of cars that release their contents in a derailment. This research provides insights regarding the circumstances affecting multiple-tank-car release incidents and potential strategies to reduce their occurrences. The model can be incorporated into a larger risk management framework to enable better local, regional and national safety management of hazardous materials transportation by rail

Probability analysis of multiple-tank-car release incidents in railway hazardous materials transportation

Energy Technology Data Exchange (ETDEWEB)

Liu, Xiang, E-mail: liu94@illinois.edu; Saat, Mohd Rapik, E-mail: mohdsaat@illinois.edu; Barkan, Christopher P.L., E-mail: cbarkan@illinois.edu

2014-07-15

Railroads play a key role in the transportation of hazardous materials in North America. Rail transport differs from highway transport in several aspects, an important one being that rail transport involves trains in which many railcars carrying hazardous materials travel together. By contrast to truck accidents, it is possible that a train accident may involve multiple hazardous materials cars derailing and releasing contents with consequently greater potential impact on human health, property and the environment. In this paper, a probabilistic model is developed to estimate the probability distribution of the number of tank cars releasing contents in a train derailment. Principal operational characteristics considered include train length, derailment speed, accident cause, position of the first car derailed, number and placement of tank cars in a train and tank car safety design. The effect of train speed, tank car safety design and tank car positions in a train were evaluated regarding the number of cars that release their contents in a derailment. This research provides insights regarding the circumstances affecting multiple-tank-car release incidents and potential strategies to reduce their occurrences. The model can be incorporated into a larger risk management framework to enable better local, regional and national safety management of hazardous materials transportation by rail.

Theoretical investigations of the fission product release out of the core of a high temperature reactor during hypothetical heat up accidents as example of caesium

International Nuclear Information System (INIS)

Batalas, T.A.; Iniotakis, N.; Decken, C.B. von der.

1986-03-01

The investigation has been performed by means of a physical model, taking into account the micro- and macro-structures of the pyrolytical and graphitical reactor components as well as renouncing an introduction of effective diffusion coefficients by the description of the fission products transport through the coated particle layers and the fuel elements and renouncing an assumption of the spontaneously adsorption-desorption equilibrium on the surface of the fuel elements. The solving method and the respective computer codes were also developed. In addition the theoretically calculated and the experimentally determined results regarding the caesium release from single coated particles as well as fuel elements at accident temperatures were compared. Finally the caesium release from the core of the PNP-500 reactor during a heat up accident has been estimated and discussed. (orig./HP) [de

Strategies for operation of containment related ESFs in managing activity release to the environment during accident conditions

International Nuclear Information System (INIS)

Bhawal, R.N.; Bajaj, S.S.

1998-01-01

In Indian PHWR design, a double containment concept with passive vapour suppression pool (to limit peak pressure) system has been adopted. In addition to it, various Engineered Safety Features (ESFs) have been incorporated to limit the release of radioactivity to the environment. They are: Reactor building emergency coolers for cooling which results in fast reduction of overpressure; Primary Containment Filtration and Pump Back System (PCFPBS) for reduction in iodine concentration inside RB atmosphere during post LOCA period; and, Primary Containment Controlled Discharge System (PCCDS) for the rapid reduction of over-pressure tail. Due to operation of secondary containment purge system, which maintain negative pressure in the annulus, the ground level release is negligibly small. However, if non- availability of negative pressure in secondary containment space is assumed, then operation of PCFPBS and PCCDS system reduces the ground level release significantly. In this situation, depending upon time of operation of the PCFPBS, it can effectively reduce the iodine release, both in stack level and ground level by trapping it in charcoal filters. It is seen that delay time of PCFPBS operation in conjunction with prevailing weather condition can be manipulated to reduce the effect of stack level release of iodine. In this paper the containment related ESFs used in Indian PHWR is discussed in brief and the effectiveness of operator actions and management strategies in actuation of the ESFs in reducing the activity release to environment (during postulated accident conditions) will be brought out. (author)

Assessment of accident risks in the CRBRP. Volume 2. Appendices

Energy Technology Data Exchange (ETDEWEB)

None

1977-03-01

Appendices to Volume I include core-related accident-sequence definition, CRBRP risk-assessment sequence-probability determinations, failure-probability data, accident scenario evaluation, radioactive material release analysis, ex-core accident analysis, safety philosophy and design features, calculation of reactor accident consequences, sensitivity study, and risk from fires.

Casebook on electric safety accidents

International Nuclear Information System (INIS)

1987-09-01

This book gives concentration on electric safety accidents in domestic and abroad, which introduces general electrical safety with property of electricity, safe equipment and maintenance and protection of electric shock. It lists the cases of accident caused of electricity in domestic like accident in power substation, utilization equipment, load system and another accident by electricity like death in electric shock another by electricity like death in electric shock in new building construction, the cases caused of electricity in abroad like damage in electric shock by high voltage electric transformer, electric shock in summer and earth fault accident by fault cooling tower.

The radiation accident at Institute for Energy Technology Sept. 1982

International Nuclear Information System (INIS)

Berteig, L.; Flatby, J.

1983-01-01

On September 2, 1982 a radiation accident with overexposure of one person happened at the gamma irradiation plant at Institute for Energy Technology, Kjeller, Norway. This person died from the radiation injury 13 days later. In the report reference is made to the work of different groups and bodies in connection with the accident. An analysis of the causes of the accident is given. For admittance control to the irradiation area there were generally two independent door interlock systems, one irradiation source position related and the other radiation related. The latter was dismantled for repair at the time of the accident. A micro-switch failure left the source in an ushielded position, initiated a green light on the control panel and released the interlock system of the door. According to working instructions a mobile radiation monitor should have been checked for proper function and carried by anyone entering the irradiation room. This seems not to have been carried out correctly. The conditions set forth by the Norwegian Institute of Radiation Hygiene for the restarting of the irradiation plant are presented. (RF)

[Traffic accidents associated with emotional stress after divorce].

Science.gov (United States)

Cui, Li-Juan; Yi, Xu-Fu; Chen, Xiao-Gang

2009-04-01

In recent years, the traffic accidents increased gradually, especially those caused by the drivers daily emotional abnormality and in which the drivers were liable. This article reviewed the traffic accidents caused by divorced driver's emotional abnormality, illustrated the features of those accidents from the gender, age, occupation and mileage of drivers. It was considered that the major cause of those accidents was excessive drinking due to drivers' emotional stress. Suggestions about preventing the traffic accidents caused by emotional abnormality were put forward so as to make the corresponding rules and finally decrease the emotional abnormality traffic accidents.

The Chernobyl reactor accident source term: Development of a consensus view

International Nuclear Information System (INIS)

Guntay, S.; Powers, D.A.; Devell, L.

1997-01-01

In August 1986, scientists from the former Soviet Union provided the nuclear safety community with an impressively detailed account of what was then known about the Chernobyl accident. This included assessments of the magnitudes, rates, and compositions of radionuclide releases during the ten days following initiation of the accident. A summary report based on the Soviet report, the oral presentations, and the discussions with scientists from various countries was issued by the International Atomic Energy Agency shortly thereafter. Ten years have elapsed since the reactor accident at Chernobyl. A great deal more data is now available concerning the events, phenomena, and processes that took place. The purpose of this document is to examine what is known about the radioactive materials released during the accident. The accident was peculiar in the sense that radioactive materials were released, at least initially, in an exceptionally energetic plume and were transported far from the reactor site. Release of radioactivity from the plant continued for about ten days. A number of more recent publications and results from scientists in Russia and elsewhere have significantly improved our understanding of the Chernobyl source term. Because of the special features of the reactor design and the pecularities of the Chernobyl accident, the source term for the Chernobyl accident is of limited applicability of the safety analysis of other types of reactors

Radiological consequences of the reactor accident at Three Mile Island, Pennsylvania, USA

International Nuclear Information System (INIS)

Bryant, P.M.

1979-01-01

The findings of the Ad Hoc Population Dose Assessment Group are reviewed and summarized (Population Dose and Health Impact of the Accident at the Three Mile Island Nuclear Station. A preliminary assessment for the period March 28 through April 7, 1979; May 10, 1979. Washington DC, US Government Printing Office, 1979). The principal radionuclides released were xenon-133 and xenon-135, with some iodine-131. External exposure to gamma radiation was estimated from TLDs positioned at various on-site and off-site locations. Lung exposure from inhaled xenon-133 was calculated and air and milk monitoring results gave potential dose equivalents to a child's thyroid. These numerical estimates will be further refined, but only minor corrections to the present values are anticipated. The findings of this preliminary assessment have indicated that the radiological consequences to the public of the reactor accident are minimal. (UK)

Implementation of hydrogen mitigation techniques during severe accidents in nuclear power plants

International Nuclear Information System (INIS)

1996-01-01

concentration and under special geometric conditions, an accelerated flame or even a local detonation may occur which would produce higher dynamic loads than a deflagration and a more serious threat to equipment and structures. Should it occur in spite of its low probability, a global detonation, following prolonged and extensive accumulation of hydrogen in the containment atmosphere, would be a major threat to the containment integrity. The goal of hydrogen mitigation techniques is to prevent loads, resulting from hydrogen combustion, which could threaten containment integrity. The risk of containment failure depends on the overall hydrogen concentration which is dependent on the amount of hydrogen released and the containment volume. A possible containment failure also depends on the containment structure and design which is very important in the resistance of the containment to a global combustion. Geometrical sub-compartmentalization is also very important, because significant amounts of hydrogen could accumulate in compartments to create high local concentrations of hydrogen that could be well within the detonability limits. Once accident management measures aimed at preventing severe accidents from occurring have failed and hydrogen is being generated and released to the containment atmosphere in large amounts, the first step is to reduce the possibility of hydrogen accumulating to flammable concentrations. Where flammable concentrations cannot be precluded, the next step is to minimize the volume of gas at flammable concentrations and the third and last step is to prevent further increasing hydrogen levels from the flammable to detonable mixture concentrations. The purpose of this paper is to present a snapshot, from a technical viewpoint, of the current situation regarding the implementation of hydrogen mitigation techniques for severe accident conditions in nuclear power plants. Broader aspects related to overall accident management policies are not considered here

Nuclear fuel in a reactor accident.

Science.gov (United States)

Burns, Peter C; Ewing, Rodney C; Navrotsky, Alexandra

2012-03-09

Nuclear accidents that lead to melting of a reactor core create heterogeneous materials containing hundreds of radionuclides, many with short half-lives. The long-lived fission products and transuranium elements within damaged fuel remain a concern for millennia. Currently, accurate fundamental models for the prediction of release rates of radionuclides from fuel, especially in contact with water, after an accident remain limited. Relatively little is known about fuel corrosion and radionuclide release under the extreme chemical, radiation, and thermal conditions during and subsequent to a nuclear accident. We review the current understanding of nuclear fuel interactions with the environment, including studies over the relatively narrow range of geochemical, hydrological, and radiation environments relevant to geological repository performance, and discuss priorities for research needed to develop future predictive models.

Aerial spraying to capture released radioactivity from NPP in a severe accident

International Nuclear Information System (INIS)

Younus, Irfan; Yim, Man Sung; Medard, Thiphaine

2016-01-01

The proposed strategy in this paper is the use of aqueous spray (water/foam) mixed with suitable chemical additives to capture, dissolve and stabilize the radioactive gases and aerosol particles released from leaked reactor containment and auxiliary building. The spray system can be approached to the leaked reactor building through the use of a truck with high rising cranes, unmanned aerial vehicles (UAVs, such as helicopters), aerostats, or by installing fixed piping structure around the containment building depending on the accident situation. Laboratory-scale experimental system was setup to examine the performance of such systems. The alkaline water (aqueous NaOH.Na_2S_2O_3) and foam-based spray material (sodium lauryl sulphate) were used to examine capture efficiency of gaseous iodine and aerosol particles. The gaseous iodine and aerosol removal efficiency of foam-based spray is higher when compared with alkaline water-based spray. 2. The nozzle producing full cone spray provides the better removal efficiency than nozzle producing hollow cone spray patterns.

Modelling of the tritium dispersion from postulated accidental release of nuclear power plants

International Nuclear Information System (INIS)

Soares, Abner Duarte; Simoes Filho, Francisco Fernando Lamego; Cunha, Tatiana Santos da; Aguiar, Andre Silva de; Lapa, Celso Marcelo Franklin

2011-01-01

This study has the aim to assess the impact of accidental release of tritium postulate from a nuclear power reactor through environmental modeling of aquatic resources. In order to do that it was used computational models to simulation of tritium dispersion caused by an accident in a Candu reactor located in the ongoing Angra 3 site. The Candu reactor is one that uses heavy water (D 2 O) as moderator and coolant of the core. It was postulated, then, the LOCA accident (without fusion), where was lost 66 m3 of soda almost instantaneously. This inventory contained 35 P Bq and was released a load of 9.7 TBq/s in liquid form near the Itaorna beach, Angra dos Reis - RJ. The models mentioned above were applied in two scenarios (plant stopped or operating) and showed a tritium plume with specific activities larger than the reference level for seawater (1.1 MBq/m 3 ) during the first 14 days after the accident. (author)

Worksite element as causes of occupational accidents and illnesses in Malaysian residential construction industry

Science.gov (United States)

Hafiidz, J. Mohd; Arifin, K.; Aiyub, K.; Razman, M. R.; Samsurijan, M. S.; Syakir, M. I.

2017-09-01

Construction industry is an important sector that contributes to the development of economy and socioeconomy in Malaysia. It is a vital component in achieving the developed country status. However, fatalities in the Malaysian construction industry are a critical problem. Number of fatalities in this industry is the highest compared to other industries registered in Malaysia under the investigation of Department of Occupational Safety and Health (DOSH). Worksite element (worksite conditions, poor site management, construction tasks, and equipment & materials) was identified as one category of causes of occupational accidents and illnesses in Malaysian construction industry. The main objective of this study is to understand the perception of local construction personnel in terms of worksite element as causes of occupational accidents and illnesses in Malaysian residential construction industry. 13 housing projects that were registered with Ministry of Urban Wellbeing, Housing and Local Government and being permitted to perform construction work in 2012 were selected in Pulau Pinang to be studied using questionnaire survey. Worksite condition and poor site management was perceived as the most significant with the mean values of 3.68 and 3.61 respectively.

The Fukushima Daiichi nuclear accident final report of the AESJ investigation committee

CERN Document Server

Atomic Energy Society of Japan

2015-01-01

The Magnitude 9 Great East Japan Earthquake on March 11, 2011, followed by a massive tsunami struck  TEPCO’s Fukushima Daiichi Nuclear Power Station and triggered an unprecedented core melt/severe accident in Units 1 – 3. The radioactivity release led to the evacuation of local residents, many of whom still have not been able to return to their homes. As a group of nuclear experts, the Atomic Energy Society of Japan established the Investigation Committee on the Nuclear Accident at the Fukushima Daiichi Nuclear Power Station, to investigate and analyze the accident from scientific and technical perspectives for clarifying the underlying and fundamental causes, and to make recommendations. The results of the investigation by the AESJ Investigation Committee has been compiled herewith as the Final Report. Direct contributing factors of the catastrophic nuclear incident at Fukushima Daiichi NPP initiated by an unprecedented massive earthquake/ tsunami – inadequacies in tsunami measures, severe accident ma...

System to forecast health effects in order to determine necessary counter-measures in case an accidental atmospheric release

International Nuclear Information System (INIS)

Merchant, T.E.; Parmentier, N.

1985-01-01

In most accident situations involving radioactivity, the required data are the quantitative evaluation of the relevant constituents of the release and the dose factors applicable for these constituents. In the problem of an atmospheric release of radioactivity a third group of data also comes into play, the meteorological conditions at the site and time of the accident. The solution to this problem is the construction of a computer code which, by employing acquired compositions of the release as well as physical accident conditions (at the time of the incident), can be effectively run to calculate and present useful dosimetric data. To meet this need, an interactive computer program has been constructed by the Institut de Protection et de Surete Nucleaire of the Commissariat a l'Energie Atomique which calculates the gamut of dosimetric and statistical information for a region of accidental radiological concern. Application of the program is such that it outputs dosimetric information and other important data in a form independent of the site under consideration, allowing, at the same time, the computation of the same information for areas where demographics show them to be of the highest radiological concern. All this is done after requiring minimal user input

Exploring Environmental Effects of Accidents During Marine Transport of Dangerous Goods by Use of Accident Descriptions

DEFF Research Database (Denmark)

Rømer, Hans Gottberg; Haastrup, P.; Petersen, H J Styhr

1996-01-01

On the basis of 1776 descriptions of water transport accidents involving dangerous goods, environmental problems in connection with releases of this kind are described and discussed. It was found that most detailed descriptions of environmental consequences concerned oil accidents, although most...... longer than broad. Gravity scales used to describe and evaluate environmental consequences were discussed....

The role of chemistry in nuclear accidents

International Nuclear Information System (INIS)

Johnson, C.E.; Johnson, I.

1986-01-01

An accurate description of the chemical state of fission products is required for quick response in assessing the impact of nuclide release during a nuclear accident. The chemical state of the fission products is certain to change in response to their local environment. More specifically, fission products released from fuel will change their composition on contact with high-temperature steam, and these changes will determine their behavior with regard to either transport, deposition, aerosol formation, or reaction with structural components. The local oxygen potential is a key parameter in establishing the chemical state of the fission products and their release and transport mechanisms. Knowledge of the relationship of this parameter and thermal hydraulics is needed for prediction of fission product behavior in degraded core accidents. The behavior of key fission products in various stages of an accident, based on experimental results and appropriate calculations founded on fundamental thermodynamic information, will be discussed

Examination of off-site emergency protective measures for core melt accidents

International Nuclear Information System (INIS)

Aldrich, D.C.; Ericson, D.M. Jr.; Jones, R.B.

1978-01-01

Results from the Reactor Safety Study (RSS) have shown that to cause significant impacts off-site, i.e., sufficient quantities of biologically important radionuclides released, it is necessary to have a core melt accident. To mitigate the impact of such potential accidents, the design of appropriate emergency response actions requires information as to the relative merit of publicly available protective measures. In order to provide this information, a study using the consequence model developed for the RSS is being conducted to evaluate (in terms of reduced public health effects and dose exposure) potential off-site protective strategies. The paper describes the methods being used in the study as well as the results and conclusions obtained

Investigation of evaluation method for marine radiological impact during an accident

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-08-15

In 2012, JNES carried out to investigate the measurement information of radionuclide released to the ocean at Fukushima Daiichi NPP accident, the foreign regulation for marine radiological impact, and the evaluation method for release and diffusion to the ocean at the accident inside and outside Japan. (author)

Reconstruction of the Chernobyl emergency and accident management

International Nuclear Information System (INIS)

Schinner, F.; Andreev, I.; Andreeva, I.; Fritsche, F.; Hofer, P.; Lettner, E.; Seidelberger, E.; Kromp-Kolb, H.; Kromp, W.

1998-01-01

Full text of publication follows: on April 26, 1986 the most serious civil technological accident in the history of mankind occurred of the Chernobyl Nuclear Power Plant (ChNPP) in the former Soviet Union. As a direct result of the accident, the reactor was severely destroyed and large quantities of radionuclides were released. Some 800000 persons, also called 'liquidators' - including plant operators, fire-fighters, scientists, technicians, construction workers, emergency managers, volunteers, as well as medical and military personnel - were part of emergency measurements and accident management efforts. Activities included measures to prevent the escalation of the accident, mitigation actions, help for victims as well as activities in order to provide a basic infrastructure for this unprecedented and overwhelming task. The overall goal of the 'Project Chernobyl' of the Institute of Risk Research of the University of Vienna was to preserve for mankind the experience and knowledge of the experts among the 'liquidators' before it is lost forever. One method used to reconstruct the emergency measures of Chernobyl was the direct cooperation with liquidators. Simple questionnaires were distributed among liquidators and a database of leading accident managers, engineers, medical experts etc. was established. During an initial struggle with a number of difficulties, the response was sparse. However, after an official permit had been issued, the questionnaires delivered a wealth of data. Furthermore a documentary archive was established, which provided additional information. The multidimensional problem in connection with the severe accident of Chernobyl, the clarification of the causes of the accident, as well as failures and successes and lessons to be learned from the Chernobyl emergency measures and accident management are discussed. (authors)

Critical evaluation of the experiments and mathematical models for the determination of fission product release from the spherical fuel elements in cases of core heating accidents in modular HTR's

International Nuclear Information System (INIS)

Bailly, H.W.

1987-01-01

In this work, the thermal behaviour of modular reactors in cases of core heating accidents and the physical phenomena relevant for a release of radioactive materials from HTR fuel elements are explained as far as is necessary for understanding the work. The present mathematical models by which the release of radioactive materials from HTR fuel elements due to diffusion or breaking particles in cases of core heating accidents are also described, examined and evaluated with regard to their applicability to module reactors. The experiments used to verify the mathematical models are also evaluated. The mathematical models are in nearly all cases computer programs, which describe the complicated process of releasing radioactive materials quantitative mathematically. One should point out that these models are constantly being developed further, in line with the increasing amount of knowledge. To conclude the work, proposals are made for improving the certainty of information from experiments and mathematical models to determine the release behaviour of modular reactors. (orig./GL) [de

Accident progression event tree analysis for postulated severe accidents at N Reactor

International Nuclear Information System (INIS)

Wyss, G.D.; Camp, A.L.; Miller, L.A.; Dingman, S.E.; Kunsman, D.M.; Medford, G.T.

1990-06-01

A Level II/III probabilistic risk assessment (PRA) has been performed for N Reactor, a Department of Energy (DOE) production reactor located on the Hanford reservation in Washington. The accident progression analysis documented in this report determines how core damage accidents identified in the Level I PRA progress from fuel damage to confinement response and potential releases the environment. The objectives of the study are to generate accident progression data for the Level II/III PRA source term model and to identify changes that could improve plant response under accident conditions. The scope of the analysis is comprehensive, excluding only sabotage and operator errors of commission. State-of-the-art methodology is employed based largely on the methods developed by Sandia for the US Nuclear Regulatory Commission in support of the NUREG-1150 study. The accident progression model allows complex interactions and dependencies between systems to be explicitly considered. Latin Hypecube sampling was used to assess the phenomenological and systemic uncertainties associated with the primary and confinement system responses to the core damage accident. The results of the analysis show that the N Reactor confinement concept provides significant radiological protection for most of the accident progression pathways studied

Minimizing Total Completion Time For Preemptive Scheduling With Release Dates And Deadline Constraints

Directory of Open Access Journals (Sweden)

He Cheng

2014-02-01

Full Text Available It is known that the single machine preemptive scheduling problem of minimizing total completion time with release date and deadline constraints is NP- hard. Du and Leung solved some special cases by the generalized Baker's algorithm and the generalized Smith's algorithm in O(n2 time. In this paper we give an O(n2 algorithm for the special case where the processing times and deadlines are agreeable. Moreover, for the case where the processing times and deadlines are disagreeable, we present two properties which could enable us to reduce the range of the enumeration algorithm

TRADOS - an air trajectory dose model for long range transport of radioactive release to the atmosphere

International Nuclear Information System (INIS)

Rossi, J.; Valkama, I.

1985-01-01

A model for estimating radiation doses resulting from long range atmospheric transport of released radionuclides in accidents is precented. The model (TRADOS) is able to treat changing diffusion conditions. For example the plume can be exposed to temporary rain, changes in turbulence and mixing depth. This can result in considerable changes in individual doses. The method is applied to an example trajectory and the doses caused by a serious reactor accident are calculated

Implementation of a Thermodynamic Solver within a Computer Program for Calculating Fission-Product Release Fractions

Science.gov (United States)

Barber, Duncan Henry

During some postulated accidents at nuclear power stations, fuel cooling may be impaired. In such cases, the fuel heats up and the subsequent increased fission-gas release from the fuel to the gap may result in fuel sheath failure. After fuel sheath failure, the barrier between the coolant and the fuel pellets is lost or impaired, gases and vapours from the fuel-to-sheath gap and other open voids in the fuel pellets can be vented. Gases and steam from the coolant can enter the broken fuel sheath and interact with the fuel pellet surfaces and the fission-product inclusion on the fuel surface (including material at the surface of the fuel matrix). The chemistry of this interaction is an important mechanism to model in order to assess fission-product releases from fuel. Starting in 1995, the computer program SOURCE 2.0 was developed by the Canadian nuclear industry to model fission-product release from fuel during such accidents. SOURCE 2.0 has employed an early thermochemical model of irradiated uranium dioxide fuel developed at the Royal Military College of Canada. To overcome the limitations of computers of that time, the implementation of the RMC model employed lookup tables to pre-calculated equilibrium conditions. In the intervening years, the RMC model has been improved, the power of computers has increased significantly, and thermodynamic subroutine libraries have become available. This thesis is the result of extensive work based on these three factors. A prototype computer program (referred to as SC11) has been developed that uses a thermodynamic subroutine library to calculate thermodynamic equilibria using Gibbs energy minimization. The Gibbs energy minimization requires the system temperature (T) and pressure (P), and the inventory of chemical elements (n) in the system. In order to calculate the inventory of chemical elements in the fuel, the list of nuclides and nuclear isomers modelled in SC11 had to be expanded from the list used by SOURCE 2.0. A