Mineral raw materials for power production in legislation of the Republic of Croatia

International Nuclear Information System (INIS)

Matisa, Z.

1999-01-01

According to the Constitution of the Republic of Croatia, mineral wealth is a public good of legal interest to the Republic of Croatia and enjoys its special protection. The Mining Law establishes that mineral wealth (including mineral resources that are used for power production) is the property of the Republic of Croatia. Among other mineral raw materials, this refers to mineral raw materials that are used for power production: coal, oil, natural gas, radioactive mineral raw materials and geothermal waters. These mineral resources are as almost all other mineral raw materials with the exception of geothermal waters, an unrecoverable natural resource. The right to use that natural resource may be granted only by a concession. The mining legislation provides for exploration and exploitation of mineral raw materials. Exploration of oil and gas is considered to comprise operations and testing with the aim to establish the existence, position and form of oil and natural gas deposits, their quality and quantity, as well as exploitation conditions. Exploitation of oil and natural gas is considered to comprise extraction from deposits, refining and transport, as well as disposal in geological structures. Mineral raw materials used in power production amount to 63% of national total primary energy production, and they cover 33% of total power consumption in the country. Legislation in the Republic of Croatia, which refers to exploration and exploitation of oil and natural gas, allows economic utilization of that unrecoverable natural wealth to run smoothly and in compliance with practices in our European environment. (author)

Non-Coal Mineral Production Mines in Iowa, 2000

Data.gov (United States)

Iowa State University GIS Support and Research Facility — Registered noncoal mineral production sites within the State of Iowa, current to the year 2000. This shape file contains polygons representing the permitted...

Investigation of Ageing Effects on Organic Binders used for Mineral Wool Products

DEFF Research Database (Denmark)

Zafar, Ashar

mainly due to hydrolyzation of urea containing groups. On the other hand, XPS and ToF-SIMS characterization of alkanol amine-acid anhydride binder coated mineral fibres consistently showed that the surface chemical composition of the organic components of these samples did not change appreciably during......Phenol-Urea-Formaldehyde (PUF) binder based mineral wool products’ mechanical properties have been observed to degrade during ageing at elevated temperatures and humidity, while mineral wool products based on a newly developed alkanol amine-acid anhydride binder exhibited better ageing properties...... for the same duration of ageing. The main purpose of the present work is to examine the chemical changes occurring in the phenol-urea-formaldehyde binder based mineral fibres due to ageing, which cause deterioration of the mechanical properties of mineral wool products. This has been done using surface...

Effect of source of trace minerals in either forage- or by-product-based diets fed to dairy cows: 2. Apparent absorption and retention of minerals.

Science.gov (United States)

Faulkner, M J; St-Pierre, N R; Weiss, W P

2017-07-01

Eighteen multiparous cows were used in a split-plot replicated Latin square with two 28-d periods to evaluate the effects of source of supplemental Cu, Zn, and Mn (sulfates or hydroxy) on apparent absorption of minerals when fed in either a forage- or by-product-based diet. The by-product diets were formulated to have greater concentrations of NDF and lesser concentrations of starch, and specific ingredients were chosen because they were good sources of soluble fiber and β-glucans, which bind trace minerals in nonruminants. We hypothesized that hydroxy trace minerals would interact less with digesta and have greater apparent absorption compared with sulfate minerals, and the difference in apparent absorption would be greater for the by-product diet compared with the forage-based diet. During the 56-d experiment, cows remained on the same fiber treatment but source of supplemental trace mineral was different for each 28-d period; thus, all cows were exposed to both mineral treatments. During each period cows were fed no supplemental Cu, Zn, or Mn for 16 d, followed by 12 d of feeding supplemental minerals from either sulfate or hydroxy sources. Supplemental minerals for each of the mineral sources fed provided approximately 10, 35, and 32 mg/kg of supplemental Cu, Zn, and Mn, respectively, for both fiber treatments. Total Cu, Zn, and Mn dietary concentrations, respectively, were approximately 19, 65, and 70 mg/kg for the forage diets and 21, 85, and 79 for the by-product diets. Treatment had no effect on dry matter intake (24.2 kg/d) or milk production (34.9 kg/d). Cows consuming the by-product diets had greater Zn (1,863 vs. 1,453 mg/d) and Mn (1,790 vs. 1,588 mg/d) intake compared with cows fed forage diets, but apparent Zn absorption was similar between treatments. Manganese apparent absorption was greater for the by-product diets compared with the forage diets (16 vs. 11%). A fiber by mineral interaction was observed for Cu apparent absorption, as cows fed

Does plant uptake or low soil mineral-N production limit mineral-N losses to surface waters and groundwater from soils under grass in summer?

International Nuclear Information System (INIS)

Bhatti, Ambreen; McClean, Colin J.; Cresser, Malcolm S.

2013-01-01

Summer minima and autumn/winter maxima in nitrate concentrations in rivers are reputedly due to high plant uptake of nitrate from soils in summer. A novel alternative hypothesis is tested here for soils under grass. By summer, residual readily mineralizable plant litter from the previous autumn/winter is negligible and fresh litter input low. Consequently little mineral-N is produced in the soil. Water-soluble and KCl-extractable mineral N in fresh soils and soils incubated outdoors for 7 days have been monitored over 12 months for soil transects at two permanent grassland sites near York, UK, using 6 replicates throughout. Vegetation-free soil is shown to produce very limited mineral-N in summer, despite the warm, moist conditions. Litter accumulates in autumn/winter and initially its high C:N ratio favours N accumulation in the soil. It is also shown that mineral-N generated monthly in situ in soil substantially exceeds the monthly mineral-N inputs via wet deposition at the sites. -- Highlights: •Soil mineral-N has been measured over a year at two grassland sites in the UK. •Rates of mineral-N production have also been measured in vegetation-free soils. •In summer, though soils were warm and moist, rate of mineral-N production was low. •The effect is attributed to low litter inputs in summer when grass is growing well. •Low mineral-N production in summer must be limiting N losses to fresh waters. -- Low mineral-N production in soils under grass limits summer N losses to surface- and ground-waters

30 CFR 206.181 - How do I establish processing costs for dual accounting purposes when I do not process the gas?

Science.gov (United States)

2010-07-01

... accounting purposes when I do not process the gas? 206.181 Section 206.181 Mineral Resources MINERALS... Processing Allowances § 206.181 How do I establish processing costs for dual accounting purposes when I do not process the gas? Where accounting for comparison (dual accounting) is required for gas production...

30 CFR 206.176 - How do I perform accounting for comparison?

Science.gov (United States)

2010-07-01

... paragraphs (b) and (c) of this section, the actual dual accounting value, for royalty purposes, is the... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I perform accounting for comparison? 206... REVENUE MANAGEMENT PRODUCT VALUATION Indian Gas § 206.176 How do I perform accounting for comparison? (a...

International strategic minerals inventory summary report; zirconium

Science.gov (United States)

Towner, R.R.

1992-01-01

Zircon, a zirconium silicate, is currently the most important commercial zirconium-bearing mineral. Baddeleyite, a natural form of zirconia, is less important but has some specific end uses. Both zircon and baddeleyite occur in hard-rock and placer deposits, but at present all zircon production is from placer deposits. Most baddeleyite production is from hard-rock deposits, principally as a byproduct of copper and phosphate-rock mining. World zirconium resources in identified, economically exploitable deposits are about 46 times current production rates. Of these resources, some 71 percent are in South Africa, Australia, and the United States. The principal end uses of zirconium minerals are in ceramic applications and as refractories, abrasives, and mold linings in foundries. A minor amount, mainly of zircon, is used for the production of hafnium-free zirconium metal, which is used principally for sheathing fuel elements in nuclear reactors and in the chemical-processing industry, aerospace engineering, and electronics. Australia and South Africa are the largest zircon producers and account for more than 70 percent of world output; the United States and the Soviet Union account for another 20 percent. South Africa accounts for almost all the world's production of baddeleyite, which is about 2 percent of world production of contained zirconia. Australia and South Africa are the largest exporters of zircon. Unless major new deposits are developed in countries that have not traditionally produced zircon, the pattern of world production is unlikely to change by 2020. The proportions, however, of production that come from existing producing countries may change somewhat.

Concentration of gold, sulphide minerals, and uranium oxide minerals by flotation from ores and metallurgical plant products

International Nuclear Information System (INIS)

Weston, D.

1976-01-01

A process is described for the concentration by flotation of gold, gold bearing minerals and uranium oxide minerals from ores and metallurgical plant products. A pulp of a ground ore is agitation conditioned in at least two agitation conditioning stages wherein in at least one stage the pH of the pulp is lowered with an acid agent to within the pH range of about 1.5 to 5.0, and wherein in at least one additional agitation conditioning stage the pH of the pulp is raised to within the pH range of about 6.0 to 11.0 and wherein in at least the last stage prior to flotation at least one collector selected from the group of sulfhydryl anionic collectors is present. Subsequently, the at least two stage agitation conditioned pulp is subjected to flotation to produce a flotation concentrate enriched in at least one of the mineral values from the group consisting of gold, gold bearing minerals and uranium minerals

CONSOLIDATED COST ACCOUNTING AT MEAT AND FAT PRODUCTION: METHODOLOGY AND PRACTICE

Directory of Open Access Journals (Sweden)

Volodymyr Kushnir

2017-08-01

Full Text Available Aim of the article is to study and improve methods of consolidated cost accounting at meat and fat production to obtain detailed information about production costs and to find ways to reduce the cost of meat production. It is offered to account expenses at meat and fat department for individual production areas that will receive detailed information for the purposes of control, analysis, calculation and reporting. For expedient budgeting activities of each structural unit of meat and fat production and for needs to saving production is proposed to reflect the costs of each production plant to separate groups of analytical accounts. Key words: consolidated accounting, production costs of meat and fat production, cost accounting.

Radioactive mineral occurrences in the Bancroft area

Energy Technology Data Exchange (ETDEWEB)

Satterly, J

1958-12-31

The report summarizes three years of field work conducted in the Bancroft area investigating occurrences of radioactive minerals, and also includes accounts of properties in the area for which drill logs and survey reports have been filed. It begins with a history of exploration and development of radioactive mineral deposits in the area, a review of the area`s general geology (Grenville metasediments, plutonic rocks), and general descriptions of the types of radioactive mineral deposits found in the area (deposits in granitic and syenitic bodies, metasomatic deposits in limy rocks, hydrothermal deposits). It also describes the mineralogy of radioactive minerals found in the area and the Geiger counter technique used in the investigation. The bulk of the report consists of descriptions of radioactive mineral properties and mine workings, containing (where available) information on exploration history, general and economic geology, and production.

Monolingual accounting dictionaries for EFL text production

Directory of Open Access Journals (Sweden)

Sandro Nielsen

2006-10-01

Full Text Available Monolingual accounting dictionaries are important for producing financial reporting texts in English in an international setting, because of the lack of specialised bilingual dictionaries. As the intended user groups have different factual and linguistic competences, they require specific types of information. By identifying and analysing the users' factual and linguistic competences, user needs, use-situations and the stages involved in producing accounting texts in English as a foreign language, lexicographers will have a sound basis for designing the optimal English accounting dictionary for EFL text production. The monolingual accounting dictionary needs to include information about UK, US and international accounting terms, their grammatical properties, their potential for being combined with other words in collocations, phrases and sentences in order to meet user requirements. Data items that deal with these aspects are necessary for the international user group as they produce subject-field specific and register-specific texts in a foreign language, and the data items are relevant for the various stages in text production: draft writing, copyediting, stylistic editing and proofreading.

77 FR 3223 - National Emissions Standards for Hazardous Air Pollutants: Mineral Wool Production and Wool...

Science.gov (United States)

2012-01-23

... Emission Standards for Hazardous Air Pollutants: Mineral Wool Production Risk and Technology Review..., Administrative practice and procedure, Air pollution control, Hazardous substances, Intergovernmental relations... National Emissions Standards for Hazardous Air Pollutants: Mineral Wool Production and Wool Fiberglass...

Summaries of important areas for mineral investment and production opportunities of nonfuel minerals in Afghanistan

Science.gov (United States)

Peters, Stephen G.; King, Trude V.V.; Mack, Thomas J.; Chornack, Michael P.

2011-01-01

The U.S. Geological Survey (USGS) and the U.S. Department of Defense Task Force for Business and Stability Operations (TFBSO) entered into an agreement with the Afghanistan Geological Survey to study and assess the fuel and nonfuel mineral resources of Afghanistan from October 2009 to September 2011 so that these resources could be economically extracted to expand the economy of Afghanistan. This report summarizes the results of joint studies on 24 important areas of interest (AOIs) of nonfuel mineral resources that were identified for mineral investment and production opportunities in Afghanistan. This report is supported by digital data and archival and non-USGS reports on each AOI, and these data are available from the Afghanistan Geological Survey Data Center in Kabul (http://mom.gov.af/en/ and http://www.bgs.ac.uk/afghanminerals/) and for viewing and download on the USGS public Web site and in a separate viewer at http://mapdss2.er.usgs.gov/.

Technical papers 1: regional energy accounting; Cahiers techniques 1: bilan energetique regional

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

The regional energy accounting is an appropriate tool to the elaboration energy conservation programs. It allows to identify the regional stakes and understand the impacts of the energy policies. In this accounting the consumptions are presented by energy products (petroleum products, mineral solid fuels, renewable energies, electric power, natural gas) and by consumption sectors (steel metallurgy, accommodation, ternary industry, agricultural, transport). (A.L.B.)

25 CFR 225.26 - Auditing and accounting.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Auditing and accounting. 225.26 Section 225.26 Indians... SOLID MINERALS AGREEMENTS Minerals Agreements § 225.26 Auditing and accounting. The Secretary may... agreement. Procedures and standards used for accounting and auditing of minerals agreements will be in...

Refining of the cracked products of mineral oils, etc

Energy Technology Data Exchange (ETDEWEB)

Seelig, S

1928-06-02

A process is disclosed for the refining of the distilled or cracked products from mineral oil, shale oil, or brown-coal-tar oil, with the aid of alkali-plumbite solution, characterized by adding to the plumbite solution from oxide, iron hydroxide, basic oxide, or an iron salt.

Monolingual accounting dictionaries for EFL text production

DEFF Research Database (Denmark)

Nielsen, Sandro

2006-01-01

Monolingual accounting dictionaries are important for producing financial reporting texts in English in an international setting, because of the lack of specialised bilingual dictionaries. As the intended user groups have different factual and linguistic competences, they require specific types...... text production. The monolingual accounting dictionary needs to include information about UK, US and international accounting terms, their grammatical properties, their potential for being combined with other words in collocations, phrases and sentences in order to meet user requirements. Data items...... of information. By identifying and analysing the users' factual and linguistic competences, user needs, use-situations and the stages involved in producing accounting texts in English as a foreign language, lexicographers will have a sound basis for designing the optimal English accounting dictionary for EFL...

Monolingual Accounting Dictionaries for EFL Text Production

DEFF Research Database (Denmark)

Nielsen, Sandro

2009-01-01

Monolingual accounting dictionaries are important for producing financial reporting texts in English in an international setting, because of the lack of specialised bilingual dictionaries. As the intended user groups have different factual and linguistic competences, they require specific types...... text production. The monolingual accounting dictionary needs to include information about UK, US and international accounting terms, their grammatical properties, their potential for being combined with other words in collocations, phrases and sentences in order to meet user requirements. Data items...... of information. By identifying and analysing the users' factual and linguistic competences, user needs, use-situations and the stages involved in producing accounting texts in English as a foreign language, lexicographers will have a sound basis for designing the optimal English accounting dictionary for EFL...

Logistic Principles Application for Managing the Extraction and Transportation of Solid Minerals

Directory of Open Access Journals (Sweden)

Tyurin Alexey

2017-01-01

Full Text Available Reducing the cost of resources in solid mineral extraction is an urgent task. For its solution the article proposes logistic approach use to management of mining company all resources, including extraction processes, transport, mineral handling and storage. The account of the uneven operation of mining, transport units and complexes for processing and loading coal into railroad cars allows you to identify the shortcomings in the work of the entire enterprise and reduce resources use at the planned production level. In the article the mining planning model taking into account the dynamics of the production, transport stations and export coal to consumers rail transport on example of Krasnoyarsk region Nazarovo JSC «Razrez Sereul'skiy». Rolling planning methods use and data aggregation allows you to split the planning horizon (month on equal periods and to use of dynamic programming method for building mining optimal production programme for the month. Coal mining production program definition technique will help align the work of all enterprise units, to optimize resources of all areas, to establish a flexible relationship between manufacturer and consumer, to take into account the irregularity of rail transport.

Logistic Principles Application for Managing the Extraction and Transportation of Solid Minerals

Science.gov (United States)

Tyurin, Alexey

2017-11-01

Reducing the cost of resources in solid mineral extraction is an urgent task. For its solution the article proposes logistic approach use to management of mining company all resources, including extraction processes, transport, mineral handling and storage. The account of the uneven operation of mining, transport units and complexes for processing and loading coal into railroad cars allows you to identify the shortcomings in the work of the entire enterprise and reduce resources use at the planned production level. In the article the mining planning model taking into account the dynamics of the production, transport stations and export coal to consumers rail transport on example of Krasnoyarsk region Nazarovo JSC «Razrez Sereul'skiy». Rolling planning methods use and data aggregation allows you to split the planning horizon (month) on equal periods and to use of dynamic programming method for building mining optimal production programme for the month. Coal mining production program definition technique will help align the work of all enterprise units, to optimize resources of all areas, to establish a flexible relationship between manufacturer and consumer, to take into account the irregularity of rail transport.

30 CFR 210.201 - How do I submit Form MMS-4430, Solid Minerals Production and Royalty Report?

Science.gov (United States)

2010-07-01

..., Colorado 80217-5810; or (ii) For courier service or overnight mail (excluding Express Mail): Minerals... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I submit Form MMS-4430, Solid Minerals Production and Royalty Report? 210.201 Section 210.201 Mineral Resources MINERALS MANAGEMENT SERVICE...

Investigation of technologies for producing organic-mineral fertilizers and biogas from waste products

Directory of Open Access Journals (Sweden)

Anna V. Ivanchenko

2015-12-01

Full Text Available Modern agriculture requires special attention to a preservation of soil fertility; development of cultures fertilization; producing of new forms of organic-mineral fertilizers which nutrient absorption coefficient would be maximum. Application of artificial fertilizers has negative influence on soils. Aim: The aim of the study is to identify the scientific regularities of organic-mineral fertilizers and biogas technologies from waste products and cattle manure with the addition of fermentation additive. Materials and Methods: The affordable organic raw material for production of organic-mineral fertilizers is the cattle manure. Environmental technology of the decontamination and utilization of manure is its anaerobic bioconversion to fermented fertilizer and biogas. The waste decontamination and the degradation of complex polymers into simple renewable and plant-available compounds takes place during the conversion of manner to biogas. Experimental research carried out for the three types of loads to the model reactor of anaerobic fermentation with 1 dm3 volume for dry matter. The mesophilic fermentation mode used in the experiments (at 33 °C. Results: It has been shown that the addition of whey to the input raw materials in a ratio of 1:30 accelerates the process of anaerobic digestion and biogas generation in 1,3...2,1 times. An analysis of organic-mineral fertilizers from cattle manure were conducted. Technological schemes of organic-mineral fertilizers and biogas technologies from waste products were developed. Conclusions: Implementation of research results to farms and urban waste treatment facilities lead to increased energy potential of our country and expansion of high-quality organic-mineral fertilizers variety, which are well absorbed by plants.

Distribution of Clay Minerals in Light Coal Fractions and the Thermal Reaction Products of These Clay Minerals during Combustion in a Drop Tube Furnace

Directory of Open Access Journals (Sweden)

Sida Tian

2016-06-01

Full Text Available To estimate the contribution of clay minerals in light coal fractions to ash deposition in furnaces, we investigated their distribution and thermal reaction products. The light fractions of two Chinese coals were prepared using a 1.5 g·cm−3 ZnCl2 solution as a density separation medium and were burned in a drop-tube furnace (DTF. The mineral matter in each of the light coal fractions was compared to that of the relevant raw coal. The DTF ash from light coal fractions was analysed using hydrochloric acid separation. The acid-soluble aluminium fractions of DTF ash samples were used to determine changes in the amorphous aluminosilicate products with increasing combustion temperature. The results show that the clay mineral contents in the mineral matter of both light coal fractions were higher than those in the respective raw coals. For the coal with a high ash melting point, clay minerals in the light coal fraction thermally transformed more dehydroxylation products compared with those in the raw coal, possibly contributing to solid-state reactions of ash particles. For the coal with a low ash melting point, clay minerals in the light coal fraction produced more easily-slagging material compared with those in the raw coal, playing an important role in the occurrence of slagging. Additionally, ferrous oxide often produces low-melting substances in coal ash. Due to the similarities of zinc oxide and ferrous oxide in silicate reactions, we also investigated the interactions of clay minerals in light coal fractions with zinc oxide introduced by a zinc chloride solution. The extraneous zinc oxide could react, to a small extent, with clay minerals in the coal during DTF combustion.

Production environment in mineral water plants; Mineral water kojo no seisan kankyo

Energy Technology Data Exchange (ETDEWEB)

Yoshimatsu, A. [Morinaga Engineering Company, Tokyo (Japan)

1996-01-05

This paper summarizes mineral waters as commercial products, and the manufacturing facilities thereof. The most widely used pattern of packaging mineral waters is to use either PET bottle or back-in box. The manufacturing process consists generally of: rough filtration of natural water, storage, activated carbon filtration, filtration, sterilization, ultrafine filtration, warm water bottling, capping, cooling, cartoning, storage, and shipment. The rough filtration removes sands. The activated carbon filtration removes water soluble organics. The sterilization is carried out under conditions of retaining the water at 75{degree}C for 15 seconds or retaining at 120 to 140{degree}C for 2 seconds. The ultrafine filtration uses a ceramic filter with a thickness of 0.2{mu}m. Sterilizing harmful microorganisms uses heating operation and filters to remove bacteria. An example may be cited that uses a bio-clean room for the purpose of controlling the harmful microorganisms. Subject microorganisms include a variety of viruses, rickettsia, bacteria, and fungi. The super-high performance (HEPA) filter used in the sterilization is demanded of collecting dusts with sizes of 0.3{mu}m or larger at a collection efficiency of 99.97% or higher. 3 refs., 4 figs., 1 tab.

Mineral wealth and the economic transition: Kazakhstan

International Nuclear Information System (INIS)

Auty, R.M.

1998-01-01

The exploitation of mineral wealth can amplify the problems of the transition economies in three basic ways. First, the rebound of the real exchange rate that characterises a successful transition may be augmented by the capital inflow required to expand mineral production. This can cause both recession in the short-run and lower growth in the medium-term. Second, when the mineral revenues expand, the Dutch Disease effects may intensify the transition-related shrinkage of the non-mining tradable sector, thereby retarding economic diversification and rendering the economy vulnerable to external shocks. Third, a mineral boom tends to concentrate revenue on the government, which may use it to postpone difficult decisions on economic reform and/or dissipate the revenue due to weak financial markets and inadequate public accountability. Kazakhstan, like oil-rich Azerbaijan, is a late reformer and displays evidence of a faster transition rebound than other less resource-rich countries in the CIS do. However, Kazakhstan has two advantages over Azerbaijan. First, Kazakhstan has a more diversified mineral endowment with which to counter any trend towards single commodity specialization. Second, Kazakhstan is making a later start on oil expansion so that it can learn from the experience of Azerbaijan. Priorities for Kazakhstan are the continuation of prudent economic policies, the creation of institutions to enhance the transparency of the revenue flows, and the use of environmental accounting to provide a rationale for the deployment of the oil rents. (author)

IPP (Innovation in Products and Processes) For the sector of mineral raw materials and energy

International Nuclear Information System (INIS)

Correa E, Alexander; Alvarez, Carlos; Rodriguez, Andres

2009-01-01

This article presents the results of the research project IPP (process and product innovation) which is a systemic and thorough analysis of production chains, based on the study - productivity and processes. This project is working in 4 phases: Intelligence, experimentation, innovation, and technological appropriation, These steps are aimed at continuous improvement of processes, Products of the organization and the interactions between actors in the production of mineral raw materials and energy. In the intelligence phase, we studied the characteristics, needs, market, and environment of the production chain that are the result of the use of natural resources and environment. In the second phase, characterized the development, design and implementation of prototype products and processes that emulate the behavior of the process in a real system and are environmentally friendly. Taking into account the first two phases in the third, saw the formulation and design new processes and products that improve efficiency and productivity. In the last phase of the project is the service that seeks to appropriate technological innovation and knowledge transfer from one end to the chain. Finally the result of the proposed IPP is a center of innovation and development of logistic practices within the National University of Colombia to ensure the ownership and suitability of the solutions to the production chains is an innovation for the mining sector, materials and energy with the early-friendly products and processes with the environment.

Effects of mineral matter on products and sulfur distributions in hydropyrolysis

Energy Technology Data Exchange (ETDEWEB)

Chen, H.; Li, B.; Zhang, B. [Chinese Academy of Sciences, Taiyuan (China). Inst. of Coal Chemistry

1999-05-01

The effects of the mineral matter on the product yield and sulfur distribution in hydropyrolysis and pyrolysis of Chinese Hongmiao lignite were investigated using a fixed-bed reactor. The volatile sulfur-containing gases (H{sub 2}S, COS, CH{sub 3}SH) were also analyzed as a function of pyrolysis temperature. Coal samples were treated with HCl/HF or HCl/HF and CrCl{sub 2} solution to eliminate minerals and pyrite respectively. In hydropyrolysis, demineralized Hongmiao lignite showed lower yields of tar and water than the raw coal. Demineralization cannot only minimize the fixation effect of basic mineral matter on sulfur-containing gases, but also increase the sulfur distribution of the tar. Further, from the evolution profiles of sulfur-containing gases, it is possible to elucidate the contribution of minerals, pyrite and organic sulfur to the sulfur evolution. Pyrite may not be the only source of COS formation. 32 refs., 14 figs., 3 tabs.

Reduction of iron-bearing lunar minerals for the production of oxygen

Science.gov (United States)

Massieon, Charles; Cutler, Andrew; Shadman, Farhang

1992-01-01

The kinetics and mechanism of the reduction of simulants of the iron-bearing lunar minerals olivine ((Fe,Mg)2SiO4), pyroxene ((Fe,Mg,Ca)SiO3), and ilmenite (FeTiO3) are investigated, extending previous work with ilmenite. Fayalite is reduced by H2 at 1070 K to 1480 K. A layer of mixed silica glass and iron forms around an unreacted core. Reaction kinetics are influenced by permeation of hydrogen through this layer and a reaction step involving dissociated hydrogen. Reaction mechanisms are independent of Mg content. Augite, hypersthene, and hedenbergite are reduced in H2 at the same temperatures. The products are iron metal and lower iron silicates mixed throughout the mineral. Activation energy rises with calcium content. Ilmenite and fayalite are reduced with carbon deposited on partially reduced minerals via the CO disproportionation reaction. Reduction with carbon is rapid, showing the carbothermal reduction of lunar minerals is possible.

Biorefining of wheat straw: accounting for the distribution of mineral elements in pretreated biomass by an extended pretreatment – severity equation

DEFF Research Database (Denmark)

Le, Duy Michael; Sørensen, Hanne Risbjerg; Knudsen, Niels Ole

2014-01-01

Background: Mineral elements present in lignocellulosic biomass feedstocks may accumulate in biorefinery process streams and cause technological problems, or alternatively can be reaped for value addition. A better understanding of the distribution of minerals in biomass in response to pretreatment...... factors is therefore important in relation to development of new biorefinery processes. The objective of the present study was to examine the levels of mineral elements in pretreated wheat straw in response to systematic variations in the hydrothermal pretreatment parameters (pH, temperature......) Silicon, iron, copper, aluminum correlated with lignin and cellulose levels, but the levels of these constituents showed no severity-dependent trends. For the first group, an expanded pretreatment-severity equation, containing a specific factor for each constituent, accounting for variability due...

2,4,6-Trinitrotoluene mineralization and bacterial production rates of natural microbial assemblages from coastal sediments

International Nuclear Information System (INIS)

Montgomery, Michael T.; Coffin, Richard B.; Boyd, Thomas J.; Smith, Joseph P.; Walker, Shelby E.; Osburn, Christopher L.

2011-01-01

The nitrogenous energetic constituent, 2,4,6-Trinitrotoluene (TNT), is widely reported to be resistant to bacterial mineralization (conversion to CO 2 ); however, these studies primarily involve bacterial isolates from freshwater where bacterial production is typically limited by phosphorus. This study involved six surveys of coastal waters adjacent to three biome types: temperate broadleaf, northern coniferous, and tropical. Capacity to catabolize and mineralize TNT ring carbon to CO 2 was a common feature of natural sediment assemblages from these coastal environments (ranging to 270+/-38 μg C kg -1 d -1 ). More importantly, these mineralization rates comprised a significant proportion of total heterotrophic production. The finding that most natural assemblages surveyed from these ecosystems can mineralize TNT ring carbon to CO 2 is consistent with recent reports that assemblage components can incorporate TNT ring carbon into bacterial biomass. These data counter the widely held contention that TNT is recalcitrant to bacterial catabolism of the ring carbon in natural environments. - Highlights: → TNT mineralization is a common feature of natural bacterial assemblages in coastal sediments. → TNT mineralization rates comprised a significant proportion of total heterotrophic production. → These data counter the widely held contention that TNT is recalcitrant to bacterial catabolism of the ring carbon in natural environments. - The capacity to mineralize TNT ring carbon to CO 2 is a common feature of natural bacterial assemblages in coastal sediment.

South Africa's mineral industry

International Nuclear Information System (INIS)

1985-06-01

The main aim of the Minerals Bureau in presenting this annual review is to provide an up-to-date reference document on the current state of the mineral industry in South Africa. This includes a brief look at the production, trade, economy, resources and deposits of precious metals and minerals, energy minerals, metallic minerals, and non-metallic minerals. One article discusses the production, trade, export, deposits and economy of uranium

Accounting in the Context of the Implementation of Production Sharing Agreements

Directory of Open Access Journals (Sweden)

Orlova Valentina K.

2018-03-01

Full Text Available The aim of the article is to study the problems of accounting in the context of the implementation of production sharing agreements (PSAs concerning development of proposals for their solution. Therefore, the main tasks considered are the assessment of the legal framework for regulation of accounting in the context of the implementation of production sharing agreements in accordance with the current legislation, a critical analysis of the unsettled provisions of the current legislation acts for the practical need, to generate information on specific accounting objects for management purposes. The ways of their solving based on the methodology for the accounting of PSAs are suggested. The methodology and scientific approaches of the research imply general scientific and specific research methods associated with complex processes of the functioning of the system for managing business entities in languages of the PSA implementation. There proposed a scheme for accounting in the context of the PSA implementation, which allows introducing in the accounting system objects that are new and characteristic only for the PSA. The practical significance is that the obtained results make it possible to separate compensation costs, single social contribution, which is necessary for determining the object of taxation in the context of PSA; to generate information on compensation costs, which is necessary when dividing the products into compensatory and profitable ones, which allows to reflect in the accounting the division of finished products into compensatory, profitable for the investor and profitable for the state. The originality and value of the authors’ development contributes to the formation of reliable information about management objects in the PSA between enterprises and the state, with clear allocation of compensation costs, compensatory products, profitable products for the state and profitable products for the investor in separate accounts.

Cost Accounting: Production and Equipment Services.

Science.gov (United States)

Schmid, William T.

Cost accounting for audiovisual productions should include direct costs, and, in some cases, the media administrator may have to calculate a per-hour surcharge for general operating overhead as well. Such procedures enable the administrator to determine cost effectiveness, to control cost overruns, and to generate more staff efficiency. Cost…

30 CFR 204.5 - What statutory requirements must I meet to obtain royalty prepayment or accounting and auditing...

Science.gov (United States)

2010-07-01

... obtain royalty prepayment or accounting and auditing relief? 204.5 Section 204.5 Mineral Resources... prepayment or accounting and auditing relief? (a) MMS and the State may allow royalty prepayment or accounting and auditing relief for your marginal property production if MMS and the State jointly determine...

Micron to Mine: Synchrotron Science for Mineral Exploration, Production, and Remediation

Science.gov (United States)

Banerjee, N.; Van Loon, L.; Flynn, T.

2017-12-01

Synchrotron science for mineral exploration, production, and remediation studies is a powerful tool that provides industry with relevant micron to macro geochemical information. Synchrotron micro X-ray fluorescence (SR-µXRF) offers a direct, high-resolution, rapid, and cost-effective chemical analysis while preserving the context of the sample by mapping ore minerals with ppm detection limits. Speciation of trace and deleterious elements can then be probed using X-ray absorption near-edge structure (XANES) spectroscopy. Large-scale (tens of cm) µXRF mapping and XANES analysis of samples collected at various mine locations have been undertaken to address questions regarding mineralization history to develop novel trace element exploration vectors. This information provides integral insights into trace element associations with ore minerals, local redox conditions responsible for mineralization, and mineralizing mechanisms. Gold is commonly intimately associated with sulfide mineralization (e.g., pyrite, arsenopyrite, etc.) and is present both as inclusions and filling fractures in sulfide grains. Gold may also occur as nanoparticles and/or in the sulfide mineral crystal lattice, known as "invisible gold". Understanding the nature and distribution of invisible gold in ore is integral to processing efficiency. The high flux and energy of a synchrotron light source allows for the detection of invisible gold by µXRF, and can probe its nature (metallic Au0 vs. lattice bound Au1+) using XANES spectroscopy. The long-term containment and management of arsenic is necessary to protect the health of both humans and the environment. Understanding the relationship of arsenic mineralization to gold deposits can lead to more sophisticated planning for mineral processing and the eventual storage of gangue materials. µXANES spectroscopy is an excellent tool for determining arsenic speciation within the context of the sample. Mineral phases such as arsenopyrite, scorodite, and

Quality of worklife and productivity in drilling in Atomic Minerals Division

International Nuclear Information System (INIS)

Singh, Rajendra.

1992-01-01

The existing trend of drilling output in Atomic Minerals Division has been briefly discussed and human resources and its bearing on productivity in our drilling efforts emphasised. Remedial measures concerning the human resources development including creation of cells at regional and zonal levels have been suggested to give effective shape to all aspects of quality of worklife and productivity. (author)

Production of Mineral Water Using Palm Bunch Ash (PBA) From ...

African Journals Online (AJOL)

A public health strategy for increasing the potassium and magnesium intake of the population was explored. These electrolytes have been confirmed by epidemiological studies to have some health benefits. A process for production of mineral water using palm bunch ash was developed. The composition of the palm bunch ...

Global stocks of selected mineral-based commodities

Science.gov (United States)

Wilburn, David R.; Bleiwas, Donald I.; Karl, Nick A.

2016-12-05

IntroductionThe U.S. Geological Survey, National Minerals Information Center, analyzes mineral and metal supply chains by identifying and describing major components of mineral and material flows from ore extraction, through intermediate forms, to a final product. This report focuses on an important component of the world’s supply chain: the amounts and global distribution of major consumer, producer, and exchange stocks of selected mineral commodities. In this report, the term “stock” is used instead of “inventory” and refers to accumulations of mined ore, intermediate products, and refined mineral-based commodities that are in a form that meets the agreed-upon specifications of a buyer or processor of intermediate products. These may include certain ores such as bauxite, concentrates, smelter products, and refined metals. Materials sometimes referred to as inventory for accounting purposes, such as ore contained in a deposit or in a leach pile, or materials that need to be further processed before they can be shipped to a consumer, are not considered. Stocks may be held (owned) by consumers, governments, investors, producers, and traders. They may serve as (1) a means to achieve economic, social, and strategic goals through government policies; (2) a secure source of supply to meet demand and to mitigate potential shortages in the supply chain; (3) a hedge to mitigate price volatility; and (4) vehicles for speculative investment.The paucity and uneven reliability of data for stocks of ores and concentrates and for material held by producers, consumers, and merchants hinder the accurate estimating of the size and distribution of this portion of the supply chain for certain commodities. This paper reviews the more visible stocks held in commodity exchange warehouses distributed throughout the world.

Integrating Steel Production with Mineral Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Klaus Lackner; Paul Doby; Tuncel Yegulalp; Samuel Krevor; Christopher Graves

2008-05-01

The objectives of the project were (i) to develop a combination iron oxide production and carbon sequestration plant that will use serpentine ores as the source of iron and the extraction tailings as the storage element for CO2 disposal, (ii) the identification of locations within the US where this process may be implemented and (iii) to create a standardized process to characterize the serpentine deposits in terms of carbon disposal capacity and iron and steel production capacity. The first objective was not accomplished. The research failed to identify a technique to accelerate direct aqueous mineral carbonation, the limiting step in the integration of steel production and carbon sequestration. Objective (ii) was accomplished. It was found that the sequestration potential of the ultramafic resource surfaces in the US and Puerto Rico is approximately 4,647 Gt of CO2 or over 500 years of current US production of CO2. Lastly, a computer model was developed to investigate the impact of various system parameters (recoveries and efficiencies and capacities of different system components) and serpentinite quality as well as incorporation of CO2 from sources outside the steel industry.

2,4,6-Trinitrotoluene mineralization and bacterial production rates of natural microbial assemblages from coastal sediments

Energy Technology Data Exchange (ETDEWEB)

Montgomery, Michael T., E-mail: michael.montgomery@nrl.navy.mil [Naval Research Laboratory, Marine Biogeochemistry Section, Code 6114, 4555 Overlook Avenue, Washington, DC 20375 (United States); Coffin, Richard B., E-mail: richard.coffin@nrl.navy.mil [Naval Research Laboratory, Marine Biogeochemistry Section, Code 6114, 4555 Overlook Avenue, Washington, DC 20375 (United States); Boyd, Thomas J., E-mail: thomas.boyd@nrl.navy.mil [Naval Research Laboratory, Marine Biogeochemistry Section, Code 6114, 4555 Overlook Avenue, Washington, DC 20375 (United States); Smith, Joseph P., E-mail: joseph.smith@nrl.navy.mil [Naval Research Laboratory, Marine Biogeochemistry Section, Code 6114, 4555 Overlook Avenue, Washington, DC 20375 (United States); Walker, Shelby E., E-mail: Shelby.Walker@noaa.gov [Naval Research Laboratory, Marine Biogeochemistry Section, Code 6114, 4555 Overlook Avenue, Washington, DC 20375 (United States); Osburn, Christopher L., E-mail: chris_osburn@ncsu.edu [Marine, Earth and Atmospheric Sciences, North Carolina State University, Raleigh, NC 27695 (United States)

2011-12-15

The nitrogenous energetic constituent, 2,4,6-Trinitrotoluene (TNT), is widely reported to be resistant to bacterial mineralization (conversion to CO{sub 2}); however, these studies primarily involve bacterial isolates from freshwater where bacterial production is typically limited by phosphorus. This study involved six surveys of coastal waters adjacent to three biome types: temperate broadleaf, northern coniferous, and tropical. Capacity to catabolize and mineralize TNT ring carbon to CO{sub 2} was a common feature of natural sediment assemblages from these coastal environments (ranging to 270+/-38 {mu}g C kg{sup -1} d{sup -1}). More importantly, these mineralization rates comprised a significant proportion of total heterotrophic production. The finding that most natural assemblages surveyed from these ecosystems can mineralize TNT ring carbon to CO{sub 2} is consistent with recent reports that assemblage components can incorporate TNT ring carbon into bacterial biomass. These data counter the widely held contention that TNT is recalcitrant to bacterial catabolism of the ring carbon in natural environments. - Highlights: > TNT mineralization is a common feature of natural bacterial assemblages in coastal sediments. > TNT mineralization rates comprised a significant proportion of total heterotrophic production. > These data counter the widely held contention that TNT is recalcitrant to bacterial catabolism of the ring carbon in natural environments. - The capacity to mineralize TNT ring carbon to CO{sub 2} is a common feature of natural bacterial assemblages in coastal sediment.

Practical applications of trace minerals for dairy cattle.

Science.gov (United States)

Overton, T R; Yasui, T

2014-02-01

Trace minerals have critical roles in the key interrelated systems of immune function, oxidative metabolism, and energy metabolism in ruminants. To date, the primary trace elements of interest in diets for dairy cattle have included Zn, Cu, Mn, and Se although data also support potentially important roles of Cr, Co, and Fe in diets. Trace minerals such as Zn, Cu, Mn, and Se are essential with classically defined roles as components of key antioxidant enzymes and proteins. Available evidence indicates that these trace minerals can modulate aspects of oxidative metabolism and immune function in dairy cattle, particularly during the transition period and early lactation. Chromium has been shown to influence both immune function and energy metabolism of cattle; dairy cows fed Cr during the transition period and early lactation have evidence of improved immune function, increased milk production, and decreased cytological endometritis. Factors that complicate trace mineral nutrition at the farm level include the existence of a large number of antagonisms affecting bioavailability of individual trace minerals and uncertainty in terms of requirements under all physiological and management conditions; therefore, determining the optimum level and source of trace minerals under each specific situation continues to be a challenge. Typical factorial approaches to determine requirements for dairy cattle do not account for nuances in biological function observed with supplementation with various forms and amounts of trace minerals. Trace mineral nutrition modulates production, health, and reproduction in cattle although both formal meta-analysis and informal survey of the literature reveal substantial heterogeneity of response in these outcome variables. The industry has largely moved away from oxide-based programs toward sulfate-based programs; however, some evidence favors shifting supplementation strategies further toward more bioavailable forms of inorganic and organic trace

How to manage co-product inputs in emergy accounting exemplified by willow production for bioenergy

DEFF Research Database (Denmark)

Kamp, Andreas; Østergård, Hanne

2013-01-01

Assessments of environmental performance are challenged by multifunctionality of production systems where impacts cannot be assigned to any one specific output. In the assessment method emergy accounting, all available energy used up for a process is summed up after being converted to solar...... equivalent Joules. In emergy accounting each output carries the resource use burden of all co-produced outputs. When comparing emergy indicators on a product-to-product basis (reference approach), products from single-output processes tend to be favoured. This constitutes a method bias. Building on emergy...

Modelling of the physico-chemical behaviour of clay minerals with a thermo-kinetic model taking into account particles morphology in compacted material.

Science.gov (United States)

Sali, D.; Fritz, B.; Clément, C.; Michau, N.

2003-04-01

Modelling of fluid-mineral interactions is largely used in Earth Sciences studies to better understand the involved physicochemical processes and their long-term effect on the materials behaviour. Numerical models simplify the processes but try to preserve their main characteristics. Therefore the modelling results strongly depend on the data quality describing initial physicochemical conditions for rock materials, fluids and gases, and on the realistic way of processes representations. The current geo-chemical models do not well take into account rock porosity and permeability and the particle morphology of clay minerals. In compacted materials like those considered as barriers in waste repositories, low permeability rocks like mudstones or compacted powders will be used : they contain mainly fine particles and the geochemical models used for predicting their interactions with fluids tend to misjudge their surface areas, which are fundamental parameters in kinetic modelling. The purpose of this study was to improve how to take into account the particles morphology in the thermo-kinetic code KINDIS and the reactive transport code KIRMAT. A new function was integrated in these codes, considering the reaction surface area as a volume depending parameter and the calculated evolution of the mass balance in the system was coupled with the evolution of reactive surface areas. We made application exercises for numerical validation of these new versions of the codes and the results were compared with those of the pre-existing thermo-kinetic code KINDIS. Several points are highlighted. Taking into account reactive surface area evolution during simulation modifies the predicted mass transfers related to fluid-minerals interactions. Different secondary mineral phases are also observed during modelling. The evolution of the reactive surface parameter helps to solve the competition effects between different phases present in the system which are all able to fix the chemical

Effect of source of trace minerals in either forage- or by-product-based diets fed to dairy cows: 1. Production and macronutrient digestibility.

Science.gov (United States)

Faulkner, M J; Weiss, W P

2017-07-01

Excess rumen-soluble Cu and Zn can alter rumen microbial populations and reduce fiber digestibility. Because of differences in particle size and chemical composition, ruminal and total-tract digestibility of fiber from forage- and by-product-based diets can differ. We hypothesized that, because of differences in mineral solubility, diets with hydroxy rather than sulfate trace minerals would have greater fiber digestibility, but the effect may depend on source of fiber. Eighteen multiparous cows were used in a split-plot replicated Latin square with two 28-d periods to evaluate the effects of Cu, Zn, and Mn source (sulfates or hydroxy; Micronutrients USA LLC, Indianapolis, IN) and neutral detergent fiber (NDF) source (forage diet = 26% NDF vs. by-product = 36%) on total-tract nutrient digestibility. During the entire experiment (56 d) cows remained on the same fiber treatment, but source of supplemental trace mineral was different for each 28-d period so that all cows were exposed to both mineral treatments. During each of the two 28-d periods, cows were fed no supplemental Cu, Zn, or Mn for 16 d followed by 12 d of feeding supplemental Cu, Zn, and Mn from either sulfates or hydroxy sources. Supplemental minerals for each of the mineral sources fed provided approximately 10, 35, and 32 mg/kg of supplemental Cu, Zn, and Mn, respectively, for both fiber treatments. Total dietary concentrations of Cu, Zn, and Mn were approximately 19, 65, and 70 mg/kg for the forage diets and 21, 85, and 79 mg/kg for the by-product diets, respectively. Treatment had no effect on dry matter intake (24.2 kg/d) or milk production (34.9 kg/d). Milk fatty acid profiles were altered by fiber source, mineral source, and their interaction. Cows fed the by-product diets had lower dry matter (65.9 vs. 70.2%), organic matter (67.4 vs. 71.7%), and crude protein digestibility (58.8 vs. 62.1%) but greater starch (97.5 vs. 96.3%) and NDF digestibility (50.5 vs. 44.4%) compared with cows fed the

UTILIZATION OF MINERAL FIBER WASTE IN THE PRODUCTION OF GYPSUM PRODUCTS

Directory of Open Access Journals (Sweden)

Solov'ev Vitaliy Nikolaevich

2018-01-01

Full Text Available Subject: the effectiveness of using compositions with the use of basalt fibers is proven, but the composition must be selected depending on the binder and additives chosen. Research objectives: we examine the possibility of waste recycling of basalt fiber production during manufacturing of modified gypsum composite material with improved characteristics. Materials and methods: as a raw material, a gypsum binder of Samara production was used. As a reinforcement additive, a disperse waste of basalt fiber production of Tver region was used. Studying characteristics of the gypsum binder and modified mixture, and also comparative analysis of these characteristics by average density, total porosity, strength in compression and flexure of the gypsum composite were carried out using standard techniques. Results: dependence of physical and mechanical properties of the modified gypsum material on the content of the basalt fiber additive is established. It was found that an increase in concentration of the additive requires an increased water content or additional use of plasticizer. Conclusions: modification of gypsum stone with a mineral basalt additive will increase the strength, density and durability of thin-walled gypsum products, and, consequently, the demand for products due to ensuring their high quality in transportation and installation.

Method for the production of solid hydroxides contained in mineral oils, mineral oil-like materials or mineral oil-containing materials and uses of products thus obtained. Verfahren zur Herstellung von Mineraloele, mineraloelaehnliche Stoffe oder mineraloelhaltige Stoffe enthaltenden festen Hydroxiden sowie die Verwendung danach erhaltener Produkte

Energy Technology Data Exchange (ETDEWEB)

Boelsing, F

1975-07-29

A method has been developed which permits mineral oils, mineral oil-like substances or mineral oil-containing substances (eg waste oil) to be separated in powder form, even when these substance are present in a continuous phase with water (for example, oil slurries). A compound (eg. line) which forms a hydroxide with water is added, the formed hydroxide then acts as carrier substance. Prerequisite for obtaining the end-product in powdered form is that the homogeneous mixing of the oil-containing substance and hydroxide-forming substance takes place at a faster rate than the necessary auxilliary reaction, namely hydroxide formation, and further that water in present in at least stoichiometric quantities. The powdered end-product finds numerous applications eg. road construction, soil conditioning and compacting, recultivation measures in cement manufacture, and others.

The importance of mineral in animal foodstuff and its status in ruminants breeding in Malaysia

International Nuclear Information System (INIS)

Wan Zahari Mohamed

1985-01-01

A major constraint to maximizing productivity in ruminants in most developing countries are mineral imbalances; specifically deficiencies and toxicities. This paper attempts to present a comprehensive account of their occurences and the severity of mineral deficiencies in grazing ruminants in Malaysia, based on studies under extensive management and improved feeding systems. The importance of minerals in the nutrition of these animals will be highlighted. Data of mineral levels in the blood and tissues of indigenous swamp buffaloes (Bubalus bubalis), Kedah-Kelantan cattle, sheep and goats will be presented. This paper will also review the mineral levels in animal tissues, plants and soil and usage of these data for predicting the mineral status of ruminants as well as the methods of mineral supplementation for deficient animals (author)

Production capacity of metallurgical enterprises in modular structure of management accounting

Directory of Open Access Journals (Sweden)

Zambrzhitskaia E.S.

2017-01-01

Full Text Available This article is the result of constant research in development of management accounting at modern Russian metallurgical works. The required steps of renovation are presented for the modernization of management accounting system in the case of production capacity. The necessary factors with defined values are systematized for modern enterprises. The main ones are those which are regulate the measure of the payload of production capacity. For the purposes of effective management accounting at metallurgical enterprises it is suggested to use the system of controlling parameters which were formulated for the enterprise for production of rolls. Later in the article the necessary changes to the modular structure of management accounting business are described and expanded with new structural element – “Management of production capacity”. The suggested methodical approach will allow the company management to respond quickly to rapidly changing external environment and, as a consequence, to make effective management decisions.

Accounting of discounts, acquired by an enterprise when purchasing production inventories

Directory of Open Access Journals (Sweden)

Shishkina A.V.

2017-01-01

Full Text Available Different types of discounts for the price of a product are quite common in transactions. They are frequently used by industrial enterprises as well: they receive discounts when they purchase production inventories; they offer discounts when they sell the finished product. Industrial enterprise strive to minimize costs when purchasing raw materials necessary for manufacturing and therefore it is interested in acquiring a discount from supplier. Acquiring a discount is a fact of economic life and must be registered in financial accounts of an enterprise, however nowadays the patterns of accounting of such operations are not regulated by any special normative documents and traditionally applied accounting patterns do not contain information on the amounts of received discounts. It is happening because they comply with the current rules of accounting, according to which inventories are accounted only after deduction of the received discount (so the discount is granted in form of verbal agreement. This is a precursor to the lack of data on the received discounts in financial accounting system of an industrial enterprise, to the impossibility of creation the information base for analyzing the effectiveness of the received discounts on its basis, to the violation of the principle of completeness and continuity of registering all the economic life events in accounting. The article offers the already existing variants of financial accounting of the received discounts, analyzes its advantages and disadvantages from the point of view of compliance with the current legislative system and economic contents of discount operation. Proprietary technology of financial accounting of discounts, received by an industrial enterprise when purchasing production stock, is offered. This technology allows solving the stated methodological issues.

EU regulation on "conflict minerals": A step towards higher accountability in the extractive sector?

OpenAIRE

Küblböck, Karin; Grohs, Hannes

2017-01-01

"No blood in my cell phone" - In the early 2000s, NGO-campaign slogans pointed out the links between raw materials in electronic products and the financing of armed conflicts. These campaigns focused on the responsibility of companies for their supply chain. In July 2017, an EU regulation came into effect that aims to prevent companies from financing armed conflicts via their procurement of raw materials. This Policy Note explains how the debates on 'conflict minerals' led to the formulation ...

Assessment of uncertainty associated with measuring exposure to radon and decay products in the French uranium miners cohort

International Nuclear Information System (INIS)

Allodji, Rodrigue S; Leuraud, Klervi; Laurier, Dominique; Bernhard, Sylvain; Henry, Stéphane; Bénichou, Jacques

2012-01-01

The reliability of exposure data directly affects the reliability of the risk estimates derived from epidemiological studies. Measurement uncertainty must be known and understood before it can be corrected. The literature on occupational exposure to radon ( 222 Rn) and its decay products reveals only a few epidemiological studies in which uncertainty has been accounted for explicitly. This work examined the sources, nature, distribution and magnitude of uncertainty of the exposure of French uranium miners to radon ( 222 Rn) and its decay products. We estimated the total size of uncertainty for this exposure with the root sum square (RSS) method, which may be an alternative when repeated measures are not available. As a result, we identified six main sources of uncertainty. The total size of the uncertainty decreased from about 47% in the period 1956–1974 to 10% after 1982, illustrating the improvement in the radiological monitoring system over time.

Micro structural characteristics of minced meat products from use of protein-mineral additive

OpenAIRE

M. Golovko; M. Serik; T. Golovko; V. Polupan

2015-01-01

Introduction. Infringement of balance mineral substances is widely manifested in the meat products which is much wealthier in phosphorus than calcium. List of additives that containing calcium and technology meat products with their using are limited. Purpose of the work is studying and scientific substantiation of influence proteinmineral additive (PMA) on the technological microstructural properties of minced meat products. Matherials and...

Beryllium—A critical mineral commodity—Resources, production, and supply chain

Science.gov (United States)

Lederer, Graham W.; Foley, Nora K.; Jaskula, Brian W.; Ayuso, Robert A.

2016-11-14

Beryllium is a lightweight metallic element used in a wide variety of specialty and industrial applications. As a function of its unique chemical and physical properties, such as a high stiffness-to-weight ratio, resistance to temperature extremes, and high thermal conductivity, beryllium cannot be easily replaced by substitute materials in applications where combinations of these properties make it the material of choice. Because the number of beryllium producers is limited and the use of substitute materials in specific defense-related applications that are vital to national security is inadequate, several studies have categorized beryllium as a critical and strategic material. This categorization has led to the United States Government recommending that beryllium be stockpiled for use in the event of a national emergency. As of December 31, 2015, the National Defense Stockpile inventory of hot-pressed beryllium metal powder, structured beryllium metal powder, and vacuum-cast beryllium metal totaled 78 metric tons (t).The U.S. Geological Survey (USGS) Mineral Resources Program supports research on the occurrence, quality, quantity, and availability of mineral resources vital to the economy and national security. The USGS, through its National Minerals Information Center (NMIC), collects, analyzes, and disseminates information on more than 90 nonfuel mineral commodities from more than 180 countries. This fact sheet provides information on the production, consumption, supply chain, geology, and resource availability of beryllium in a global context.

Organic cattle products: Authenticating production origin by analysis of serum mineral content.

Science.gov (United States)

Rodríguez-Bermúdez, Ruth; Herrero-Latorre, Carlos; López-Alonso, Marta; Losada, David E; Iglesias, Roberto; Miranda, Marta

2018-10-30

An authentication procedure for differentiating between organic and non-organic cattle production on the basis of analysis of serum samples has been developed. For this purpose, the concentrations of fourteen mineral elements (As, Cd, Co, Cr, Cu, Fe, Hg, I, Mn, Mo, Ni, Pb, Se and Zn) in 522 serum samples from cows (341 from organic farms and 181 from non-organic farms), determined by inductively coupled plasma spectrometry, were used. The chemical information provided by serum analysis was employed to construct different pattern recognition classification models that predict the origin of each sample: organic or non-organic class. Among all classification procedures considered, the best results were obtained with the decision tree C5.0, Random Forest and AdaBoost neural networks, with hit levels close to 90% for both production types. The proposed method, involving analysis of serum samples, provided rapid, accurate in vivo classification of cattle according to organic and non-organic production type. Copyright © 2018 Elsevier Ltd. All rights reserved.

Sulfur isotope fractionation during heterogeneous oxidation of SO2 on mineral dust

Directory of Open Access Journals (Sweden)

P. Hoppe

2012-06-01

Full Text Available Mineral dust is a major fraction of global atmospheric aerosol, and the oxidation of SO2 on mineral dust has implications for cloud formation, climate and the sulfur cycle. Stable sulfur isotopes can be used to understand the different oxidation processes occurring on mineral dust. This study presents measurements of the 34S/32S fractionation factor α34 for oxidation of SO2 on mineral dust surfaces and in the aqueous phase in mineral dust leachate. Sahara dust, which accounts for ~60% of global dust emissions and loading, was used for the experiments. The fractionation factor for aqueous oxidation in dust leachate is αleachate = 0.9917±0.0046, which is in agreement with previous measurements of aqueous SO2 oxidation by iron solutions. This fractionation factor is representative of a radical chain reaction oxidation pathway initiated by transition metal ions. Oxidation on the dust surface at subsaturated relative humidity (RH had an overall fractionation factor of αhet = 1.0096±0.0036 and was found to be almost an order of magnitude faster when the dust was simultaneously exposed to ozone, light and RH of ~40%. However, the presence of ozone, light and humidity did not influence isotope fractionation during oxidation on dust surfaces at subsaturated relative humidity. All the investigated reactions showed mass-dependent fractionation of 33S relative to 34S. A positive matrix factorization model was used to investigate surface oxidation on the different components of dust. Ilmenite, rutile and iron oxide were found to be the most reactive components, accounting for 85% of sulfate production with a fractionation factor of α34 = 1.012±0.010. This overlaps within the analytical uncertainty with the fractionation of other major atmospheric oxidation pathways such as the oxidation of SO2 by H2O2 and O3 in the aqueous phase and OH in the gas phase. Clay minerals accounted for roughly 12% of the sulfate production, and oxidation on clay minerals

Accounting for particle non-sphericity in modeling of mineral dust radiative properties in the thermal infrared

International Nuclear Information System (INIS)

Legrand, M.; Dubovik, O.; Lapyonok, T.; Derimian, Y.

2014-01-01

Spectral radiative parameters (extinction optical depth, single scattering albedo, asymmetry factor) of spheroids of mineral dust composed of quartz and clays have been simulated at wavelengths between 7.0 and 10.2 µm using a T-matrix code. In spectral intervals with high values of complex index of refraction and for large particles, the parameters cannot be fully calculated with the code. Practically, the calculations are stopped at a truncation radius over which the particles contribution cannot thus be taken into account. To deal with this issue, we have developed and applied an accurate corrective technique of T-matrix Size Truncation Compensation (TSTC). For a mineral dust described by its AERONET standard aspect ratio (AR) distribution, the full error margin when applying the TSTC is within 0.3% (or ±0.15%), whatever the radiative parameter and the wavelength considered, for quartz (the most difficult case). Large AR values limit also the possibilities of calculation with the code. The TSTC has been able to complete the calculations of the T-matrix code for a modified AERONET AR distribution with a maximum AR of 4.7 instead of 3 for the standard distribution. Comparison between the simulated properties of spheroids and of spheres of same volume confirms, in agreement with the literature, that significant differences are observed in the vicinity of the mineral resonant peaks (λ ca. 8.3–8.7 µm for quartz, ca. 9.3–9.5 µm for clays) and that they are due to absorption by the small particles. This is a favorable circumstance for the TSTC, which is concerned with the contribution of the largest particles. This technique of numerical calculation improves the accuracy of the simulated radiative parameters of mineral dust, which must lead to a progress in view of applications such as remote sensing or determination of energy balance of dust in the thermal infrared (TIR), incompletely investigated so far. - Highlights: • Completion of computation of mineral

Biorefining of wheat straw: accounting for the distribution of mineral elements in pretreated biomass by an extended pretreatment-severity equation.

Science.gov (United States)

Le, Duy Michael; Sørensen, Hanne R; Knudsen, Niels Ole; Schjoerring, Jan K; Meyer, Anne S

2014-01-01

Mineral elements present in lignocellulosic biomass feedstocks may accumulate in biorefinery process streams and cause technological problems, or alternatively can be reaped for value addition. A better understanding of the distribution of minerals in biomass in response to pretreatment factors is therefore important in relation to development of new biorefinery processes. The objective of the present study was to examine the levels of mineral elements in pretreated wheat straw in response to systematic variations in the hydrothermal pretreatment parameters (pH, temperature, and treatment time), and to assess whether it is possible to model mineral levels in the pretreated fiber fraction. Principal component analysis of the wheat straw biomass constituents, including mineral elements, showed that the recovered levels of wheat straw constituents after different hydrothermal pretreatments could be divided into two groups: 1) Phosphorus, magnesium, potassium, manganese, zinc, and calcium correlated with xylose and arabinose (that is, hemicellulose), and levels of these constituents present in the fiber fraction after pretreatment varied depending on the pretreatment-severity; and 2) Silicon, iron, copper, aluminum correlated with lignin and cellulose levels, but the levels of these constituents showed no severity-dependent trends. For the first group, an expanded pretreatment-severity equation, containing a specific factor for each constituent, accounting for variability due to pretreatment pH, was developed. Using this equation, the mineral levels could be predicted with R(2) > 0.75; for some with R(2) up to 0.96. Pretreatment conditions, especially pH, significantly influenced the levels of phosphorus, magnesium, potassium, manganese, zinc, and calcium in the resulting fiber fractions. A new expanded pretreatment-severity equation is proposed to model and predict mineral composition in pretreated wheat straw biomass.

Mineral commodity summaries 2015

Science.gov (United States)

,

2015-01-01

Each chapter of the 2015 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2014 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses.

Production and use of independent media: road to government accountability?

NARCIS (Netherlands)

A. Macedo de Jesus (Anderson); I.L. van Staveren (Iris)

2014-01-01

markdownabstract__Abstract__ This study addresses the question to what extent independent media contributes to government accountability, in particular the social accountability of governments in service delivery. It does so by analysing the effect of the production and use of independent media

How to Manage Inputs from Co-production Processes in Emergy Accounting

DEFF Research Database (Denmark)

Kamp, Andreas; Østergård, Hanne

2012-01-01

In life cycle assessments it is a challenge to allocate resource use and environmental impact in processes with multiple outputs. This is especially the case when systems include agricultural products that in their production cannot be separated from each other. For emergy accounting, Bastianoni...... with systems that do not depend on joint production processes is still lacking. As a consequence, a product relying on inputs from joint production processes appears to compete poorly with a similar product that does not have to account for co-products appearing upstream. This is counter to perceived benefits...... and Marchettini (2000) suggested how to calculate transformities and other indices for joint production systems. Their proposals however, do not include how to manage inputs from joint production systems. Thus a practical method for making systems with inputs from joint production processes comparable...

How to manage inputs from joint production processes in emergy accounting

DEFF Research Database (Denmark)

Kamp, Andreas; Østergård, Hanne

In life-cycle assessments it is a challenge to allocate resource use and environmental impact in processes with multiple outputs. This is especially the case when systems include agricultural products that in their production cannot be separated from each other. For emergy accounting, Bastianoni...... with systems that do not depend on joint production processes is still lacking. As a consequence, a product relying on inputs from joint production processes appears to compete poorly with a similar product that does not have to account for by-products appearing upstream. This is counter to perceived benefits...... and Marchettini (2000) suggested how to calculate transformities and other indices for joint production systems. Their proposals however, do not include how to manage inputs from joint production systems. Thus a practical method for making systems with inputs from joint production processes comparable...

Protein and starch digestibilities and mineral availability of products developed from potato, soy and corn flour.

Science.gov (United States)

Gahlawat, P; Sehgal, S

1998-01-01

A technique for development of potato flour was standardized. Five products viz. cake, biscuit, weaning food, panjiri and ladoo were prepared incorporating potato flour, defatted soy flour and corn flour. Baking and roasting were the major processing techniques employed for the development of these products. Protein, ash and fat contents of potato flour were almost similar to those of raw potatoes. Significant differences in protein, ash and fat contents of all the products were observed. Protein and starch digestibility of potato flour was significantly higher than that of raw potatoes. Protein digestibility increased by 12 to 17 percent on baking or roasting of products. Processed products had significantly higher starch digestibility and mineral availability compared to raw products. Thus, it can be concluded that roasting and baking are effective means of improving starch and protein digestibility and mineral availability of products.

Pricing for finished products of the enterprise: accounting and analytical aspect

Directory of Open Access Journals (Sweden)

N.L. Pravdyuk

2017-03-01

Full Text Available The pricing policy chosen by the enterprise in respect of goods and finished products of own production, has a decisive influence on the formation of financial results. In modern economic conditions we need to strengthen managerial decisions on the choice and carrying out price policy and a means of solving this problem is accounting. To determine the boundaries and competence of decision-making we analyzed the regulation of these terms and processes, as well as the dynamics of the stocks across sectors of the economy, the consumer price index, producer price index, the price index of realization of industrial products. Widely used data analytical reviews of the national Bank of Ukraine, enterprises' expectations regarding efficiency, the analysis of financial market indicators, etc. Established that the provision of information management pricing of goods shall conform to the requirements of the economy, by deepening complexity of accounting, to ensure the needs of consumers. According to the study substantiates the basics of accounting and analytical aspect of the pricing policy for finished products businesses. In the study of pricing policies in respect of goods in accounting and analytical aspect, we have established the following. The existing normative-legal acts and definitions of researchers on economic and accounting analysis of the concept give a sufficiently wide interpretation, which depends on the orientation and activity of the enterprise. Factors and points of influence on the efficiency of the pricing policy are: information support of process of pricing assessment of pricing factors, establish the objectives of price policy, assessment of customer demand, cost analysis, competition analysis, selecting a pricing method that measures the price adjustment, the evaluation price risk. The economic impact of the market environment is the most significant to the pricing policy of agricultural enterprises, which revealed the analysis

Minerals industry survey, 1984

Energy Technology Data Exchange (ETDEWEB)

1984-01-01

This is the seventh edition of the statistical survey commissioned by the Australian Mining Industry Council. It represents the most comprehensive review of the financial position of the Australian minerals industry and provides timely financial data on the minerals industry. The tables of this survey have been prepared for AMIC by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies. For the purpose of the survey, the minerals industry has been defined as including exploration for, and extraction and primary processing of, minerals in Australia. The oil and gas industry is not included.

Minerals yearbook: The mineral industry of Brazil. 1988 international review

International Nuclear Information System (INIS)

Ensminger, H.R.

1988-01-01

Brazil's gross domestic product (GDP) grew only slightly in 1988 to $277 billion at current prices. The growth rate was the smallest registered since 1983, when the rate was minus 2.8%. The economy's performance was strongly influenced by a 2% to 3% decrease in industrial production and civil construction. The mineral industry, however, countered the downward trend in the industrial sector and grew a modest 1.4%. Topics discussed in the report include the following: Government policies and programs; Production; Trade; Commodity review--Metals (Aluminum, Aluminia, and Bauxite, Columbium, Copper, Gold, Iron and Steel, Manganese, Tin, Titanium); Industrial Minerals (Gem stones, Phosphate rock, Quartz); Mineral fuels (Coal, Natural gas, Petroleum, Nuclear power); Nonmineral energy sources (Alcohol, Hydroelectric)

Mineral statistics yearbook 1994

International Nuclear Information System (INIS)

1994-01-01

A summary of mineral production in Saskatchewan was compiled and presented as a reference manual. Statistical information on fuel minerals such as crude oil, natural gas, liquefied petroleum gas and coal, and of industrial and metallic minerals, such as potash, sodium sulphate, salt and uranium, was provided in all conceivable variety of tables. Production statistics, disposition and value of sales of industrial and metallic minerals were also made available. Statistical data on drilling of oil and gas reservoirs and crown land disposition were also included. figs., tabs

Depth-Dependent Mineral Soil CO2 Production Processes: Sensitivity to Harvesting-Induced Changes in Soil Climate.

Science.gov (United States)

Kellman, Lisa; Myette, Amy; Beltrami, Hugo

2015-01-01

Forest harvesting induces a step change in the climatic variables (temperature and moisture), that control carbon dioxide (CO2) production arising from soil organic matter decomposition within soils. Efforts to examine these vertically complex relationships in situ within soil profiles are lacking. In this study we examined how the climatic controls on CO2 production change within vertically distinct layers of the soil profile in intact and clearcut forest soils of a humid temperate forest system of Atlantic Canada. We measured mineral soil temperature (0, 5, 10, 20, 50 and 100 cm depth) and moisture (0-15 cm and 30-60 cm depth), along with CO2 surface efflux and subsurface concentrations (0, 2.5, 5, 10, 20, 35, 50, 75 and 100 cm depth) in 1 m deep soil pits at 4 sites represented by two forest-clearcut pairs over a complete annual cycle. We examined relationships between surface efflux at each site, and soil heat, moisture, and mineral soil CO2 production. Following clearcut harvesting we observed increases in temperature through depth (1-2°C annually; often in excess of 4°C in summer and spring), alongside increases in soil moisture (30%). We observed a systematic breakdown in the expected exponential relationship between CO2 production and heat with mineral soil depth, consistent with an increase in the role moisture plays in constraining CO2 production. These findings should be considered in efforts to model and characterize mineral soil organic matter decomposition in harvested forest soils.

Accounting for co-products in energy use, greenhouse gas emission savings and land use of biodiesel production from vegetable oils

NARCIS (Netherlands)

Corré, W.J.; Conijn, J.G.; Meesters, K.P.H.; Bos, H.L.

2016-01-01

Accounting for co-products of vegetable oil production is essential in reviewing the sustainability of biodiesel production, especially since oil crops produce valuable protein-rich co-products in different quantities and qualities. Two accounting methods, allocation on the basis of energy

30 CFR 204.201 - Who may obtain accounting and auditing relief?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Who may obtain accounting and auditing relief... MINERALS REVENUE MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES Accounting and Auditing Relief § 204.201 Who may obtain accounting and auditing relief? (a) You may obtain accounting and auditing relief under...

Productivity Change, Technical Progress, and Relative Efficiency Change in the Public Accounting Industry

OpenAIRE

Rajiv D. Banker; Hsihui Chang; Ram Natarajan

2005-01-01

We present evidence on components of productivity change in the public accounting industry toward the end of the 20th century. Using revenue and human resource data from 64 of the 100 largest public accounting firms in the United States for the 1995--1999 period, we analyze productivity change, technical progress, and relative efficiency change over time. The average public accounting firm experienced a productivity growth of 9.5% between 1995 and 1999. We find support for the hypothesis that...

Cosmic-ray production rates of neon isotopes in meteorite minerals

International Nuclear Information System (INIS)

Bhandari, N.

1988-01-01

The rates of production of 21 Ne and 22 Ne in spallation reactions, both due to solar as well as galactic cosmic rays, in some major meteoritic minerals, e.g. olivines, feldspars and pyroxenes, are calculated using their energy spectra and excitation functions. The production profiles of 21 Ne and 22 Ne due to galactic cosmic rays, and the 22 Ne/ 21 Ne ratio depend upon the size of the meteoroid. The 22 Ne/ 21 Ne ratio is very sensitive to the abundance of sodium and consequently its depth profile is distinctly different in feldspars, the ratio increasing with depth rather than decreasing as in pyroxenes and olivines. In the near-surface regions, up to a depth of 2 cm, production due to solar flare protons dominates, giving rise to a steep gradient in isotopic production as well as in the 22 Ne/ 21 Ne ratio. Composite production profiles are given and compared with measurements in some meteorites. (author). 22 refs

Role of Production Area, Seasonality and Age of Fermented Camel (Camelus Dromedarius Milk Gariss on Mineral Contents

Directory of Open Access Journals (Sweden)

Adam Ismail Ahmed

2016-12-01

Full Text Available The objective of this work was to study the differences between some minerals content of gariss samples collected from two different production areas in two different production systems (i.e. traditional system Kordofan area and semi-intensive system- which, the camels are kept in an open barn and graze around the farm. The lactating female camels are supplemented with concentrates in addition to good quality ration containing groundnut cake and Sorghum biocolor and water supply upon required in Kordofan and Khartoum provinces in Sudan at the different seasons (summer, autumn and winter and their gariss samples were collected. Sodium, potassium, calcium, magnesium and phosphorus of gariss samples collected in autumn season (Kordofan area, summer season (Khartoum area, and winter season (Khartoum and Kordofan areas were determined, after that the age of gariss was noted from farmers directly when the samples were collected. Four different ages of gariss which registered were (5-8 hrs, 12 hrs, 48 hrs and more than 48 hrs. Each fermentation time (age of gariss was used for analyzing mineral contents. The results showed that gariss prepared from different production locations and in different seasons in Kordofan and Khartoum production areas were statistically different in most of the mineral contents determined. To conclude, different feeding sources or different physiological status may affect camels’ milk and consequently their gariss product, also different age of gariss had affects the mineral content of milk.

Increasing labor productivity - an important target for miners. [USSR

Energy Technology Data Exchange (ETDEWEB)

1984-09-01

The development of coal mining in the USSR from 1980 to 1983 is discussed. Factors which influence labor productivity increase are analyzed: use of equipment with increased productivity and reliability (e.g. the KM-103 and KD-80 face systems for thin coal seams, the ANShch integrated face systems for steep coal mines, the KMT and 2UKP systems for mining seams with roofs difficult to break down, the 4PP-2 and 4PP-2Shch heading machines), use of equipment replacing manual operations during underground mining, increasing role of surface coal mining which is characterized by labor productivity higher than in underground mining, use of more reliable mining systems in surface mining less influenced by low temperatures in winter (in Siberia), use of mining schemes optimized by means of computerized simulation and mathematical models both in underground and surface coal mining, reducing idletime of mining equipment, social and economic policy aimed at labor productivity increase and reducing absenteeism, improved training and refreshment courses for miners, use of automatic control systems in coal preparation plants, use of more productive equipment for coal preparation.

Minerals Yearbook, volume I, Metals and Minerals

Science.gov (United States)

,

2018-01-01

The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

What are we missing? Scope 3 greenhouse gas emissions accounting in the metals and minerals industry

Science.gov (United States)

Greene, Suzanne E.

2018-05-01

Metal and mineral companies have significant greenhouse gas emissions in their upstream and downstream value chains due to outsourced extraction, beneficiation and transportation activities, depending on a firm's business model. While many companies move towards more transparent reporting of corporate greenhouse gas emissions, value chain emissions remain difficult to capture, particularly in the global supply chain. Incomplete reports make it difficult for companies to track emissions reductions goals or implement sustainable supply chain improvements, especially for commodity products that form the base of many other sector's value chains. Using voluntarily-reported CDP data, this paper sheds light on hotspots in value chain emissions for individual metal and mineral companies, and for the sector as a whole. The state of value chain emissions reporting for the industry is discussed in general, with a focus on where emissions could potentially be underestimated and how estimates could be improved.

Mineral potential of clays that cover the gypsum deposits in Araripina-PE region

International Nuclear Information System (INIS)

Lira, B.B.; Anjos, I.F. dos; Rego, S.A.B.C.

2011-01-01

In the present work the applicability of the clays that cover the deposits of Gypsum Plaster in the region of Araripina - PE for use as the ceramic pigments and for bricks production in the red ceramic industry was analyzed. The clay minerals contained the illite, kaolinite and smectite, with high proportion of the last one. The possibility of industrial application of this mineral clay is considerable; however, the mining industries that mine and process the gypsum in the region do not take the clays into account as the potential mineral. In general, industries use the clay minerals in manufacturing processes or as key raw materials, or as the alternatives for some kinds of the chemical processing industries. This paper aims to highlight the potential of materials that cover the deposits of gypsum in reference. The material sampled from different deposit layers was characterized and the physical treatment of ore was applied. The results showed that the material analyzed can be used in various kinds of industry, such as the production of natural ceramic pigments. (author)

Production of mineral aggregates in quartz tumbling experiments

Science.gov (United States)

Nørnberg, Per; Finster, Kai; Pall Gunnlaugsson, Haraldur; Knak Jensen, Svend; Merrison, Jonathan Peter

2013-04-01

Introduction Tumbling experiments with quartz sand with the purpose of tracing the effect of broken bonds in mineral surfaces resulted in an unexpected production of aggregates. These aggregates are a few microns in diameter, spherical and resembling tiny white "snowballs." Particle comminution by aeolian and other natural weathering processes are known in soil science and is often seen as an increase of fine particles towards the top of soil profiles (Nørnberg, P. 1987, 1988, 2002, J.S. Wright 2007). When mineral grains collide in aeolian processes they break up along weakness zones in the crystal lattice. This mechanism causes broken bonds between atoms in the crystal lattice and results in reactive groups in the mineral surface. This mechanism provides the background for experiments to investigate the oxidation processes of magnetite on the planet Mars. The primary magnetic iron oxide phase on Mars is to day known to be magnetite and the colour of the dust on Mars is most likely due to hematite. To investigate if the oxidation process could take place without going over dissolution and precipitation in water, experiments with tumbling of quartz grains in sealed glass containers along with magnetite were started. The idea was that activated bonds at the surface of quartz could oxidize magnetite and convert it to hematite over time. This proved to be the case (Merrison, J.P. et al. 2010). However, in these experiments we observed the formation of the white aggregates which has been the subject of the study that we present here. Results of tumbling experiments Commercially available quarts (Merck) was sieved to obtain the fraction between 125 and 1000 µm. This fraction was tumbled in glass containers for months and resulted in production of a significant amount of fine grained material (Merrison, J.P et al. 2010). A part of this fine fraction consists of the "snowball"-like aggregates which is a fragile element with relatively high specific surface. The physical

Educational Development and Production of Accountants in Nigeria ...

African Journals Online (AJOL)

This paper, through the review of relevant literature, examined the factors that had hindered the educational development and production of sufficient numbers of desirable quality of professional and academic accountants in Nigeria from meeting the demands of the growing Nigerian economy. Accordingly, the efforts of the ...

U.S. Geological Survey Mineral Resources Program—Mineral resource science supporting informed decisionmaking

Science.gov (United States)

Wilkins, Aleeza M.; Doebrich, Jeff L.

2016-09-19

The USGS Mineral Resources Program (MRP) delivers unbiased science and information to increase understanding of mineral resource potential, production, and consumption, and how mineral resources interact with the environment. The MRP is the Federal Government’s sole source for this mineral resource science and information. Program goals are to (1) increase understanding of mineral resource formation, (2) provide mineral resource inventories and assessments, (3) broaden knowledge of the effects of mineral resources on the environment and society, and (4) provide analysis on the availability and reliability of mineral supplies.

Field monitoring versus individual miner dosimetry of radon daughter products in mines.

Science.gov (United States)

Domański, T; Kluszczyński, D; Olszewski, J; Chruscielewski, W

1989-01-01

The paper presents the results realised simultaneously by two different and independent systems of measurement of an assessment of miners' exposure to radon daughter products which naturally occur in the air of mines. The first one, called the Air Sampling System (ASS), was based on the field monitoring of radon progeny in air, the second one, called the Individual Dosimetry System (IDS), was based on the individual dosimeters worn by miners. Experimental comparison of these two systems has been conducted for six years in eleven Polish underground metal-ore mines. This study reveals that no correlation exists between the concentration and annual miners' exposures evaluated by the ASS and IDS. The ratio ASS/IDS for mine population varies from 11.0 to 0.14 in respect of annual concentration means, and in respect to annual exposures, this ratio varies from 4.5 to 0.14. The conclusion to be drawn from six years' observation and comparison of both systems is that correct and true evaluation of miners' exposure to radon progeny can be made only by the use of the Individual Dosimetry System, since the Air Sampling System is too sensitive and too dependent on the Strategy of sampling and its radiation.

Modern control of mineral wool production process

Directory of Open Access Journals (Sweden)

Stankov Stanko P.

2013-01-01

Full Text Available In this paper, the control of the plant for mineral wool production consisting of a number of the technological units of different sizes and complexity is considered. The application of modern equipment based on PLC (Programmable Logic Controller and SCADA (Supervisory Control And Data Acquisition configuration provides optimal control of technological process. Described supervisory and control system is consisting of a number of units doing decentralized distributed control of technological entities where all possible situation are considered during work of machines and devices, which are installed in electric drive and are protected from technological and electrical accident. Transformer station and diesel engine, raw materials transport and dosage, processes in dome oven, centrifuges, polycondensation (PC chamber, burners, compressor station, binder preparation and dosage, wool cutting, completed panel packing and their transport to storehouse are controlled. Process variables and parameters like as level, flow, velocity, temperature, pressure, etc. are controlled. Control system is doing identification of process states changes, diagnostic and prediction of errors and provides prediction of behavior of control objects when input flows of materials and generates optimal values of control variables due to decreasing downtime and technic - economical requires connected to wool quality to be achieved. Supervisory and control system either eliminates unwanted changes in the production line or restricts them within the allowable limits according to the technology. In this way, the optimization of energy and raw materials consumption and appropriate products quality is achieved, where requirements are satisfied in accordance with process safety and environmental standards. SCADA provides a visual representation of controlled and uncontrolled parts of the technological process, processing alarms and events, monitoring of the changes of relevant

25 CFR 215.23a - Suspension of operations and production on leases for minerals other than oil and gas.

Science.gov (United States)

2010-04-01

... minerals other than oil and gas. 215.23a Section 215.23a Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING OPERATIONS AND LEASES, QUAPAW AGENCY § 215.23a Suspension of operations and production on leases for minerals other than oil and gas. The provisions of...

Analytical content and variability of vitamins and minerals in adult multivitamin/mineral products: national estimates for the Dietary Supplement Ingredient Database (DSID)

Science.gov (United States)

Multivitamin/mineral products (MVMs) are the most commonly reported dietary supplements used by adults in the United States. During manufacturing, some MVM ingredients are added in amounts exceeding the label claims in order to compensate for losses during the shelf life. Establishing the health be...

Clay minerals: Properties and applications to dermocosmetic products and perspectives of natural raw materials for therapeutic purposes-A review.

Science.gov (United States)

Moraes, Jemima Daniela Dias; Bertolino, Silvana Raquel Alina; Cuffini, Silvia Lucia; Ducart, Diego Fernando; Bretzke, Pedro Eriberto; Leonardi, Gislaine Ricci

2017-12-20

Clay minerals are layered materials with a number of peculiar properties, which find many relevant applications in various industries. Since they are easily found everywhere, they are particularly attractive due to their economic viability. In the cosmetic industry, clay minerals are often used as excipients to stabilize emulsions or suspensions and to modify the rheological behavior of these systems. They also play an important role as adsorbents or absorbents, not only in cosmetics but also in other industries, such as pharmaceuticals. This reviewer believes that since this manuscript is presented as covering topical applications that include pharmaceuticals, some types of clay minerals should be considered as a potential material to be used as drug delivery systems. We review several applications of clay minerals to dermocosmetic products, relating them to the underlying properties of these materials and exemplifying with a number of clay minerals available in the market. We also discuss the use of clay minerals in topically-applied products for therapeutic purposes, specially for skin treatment and protection. Copyright © 2017 Elsevier B.V. All rights reserved.

CO{sub 2} Energy Reactor – Integrated Mineral Carbonation: Perspectives on Lab-Scale Investigation and Products Valorization

Energy Technology Data Exchange (ETDEWEB)

Santos, Rafael M., E-mail: rafael.santos@alumni.utoronto.ca [Chemical and Environmental Laboratories (CEL), School of Applied Chemical and Environmental Sciences, Sheridan Institute of Technology, Brampton, ON (Canada); Knops, Pol C. M.; Rijnsburger, Keesjan L. [Innovation Concepts B.V., Twello (Netherlands); Chiang, Yi Wai [School of Engineering, University of Guelph, Guelph, ON (Canada)

2016-02-15

To overcome the challenges of mineral CO{sub 2} sequestration, Innovation Concepts B.V. is developing a unique proprietary gravity pressure vessel (GPV) reactor technology and has focussed on generating reaction products of high economic value. The GPV provides intense process conditions through hydrostatic pressurization and heat exchange integration that harvests exothermic reaction energy, thereby reducing energy demand of conventional reactor designs, in addition to offering other benefits. In this paper, a perspective on the status of this technology and outlook for the future is provided. To date, laboratory-scale tests of the envisioned process have been performed in a tubular “rocking autoclave” reactor. The mineral of choice has been olivine [~Mg{sub 1.6}Fe{sup 2+}{sub 0.4}(SiO{sub 4}) + ppm Ni/Cr], although asbestos, steel slags, and oil shale residues are also under investigation. The effect of several process parameters on reaction extent and product properties has been tested: CO{sub 2} pressure, temperature, residence time, additives (buffers, lixiviants, chelators, oxidizers), solids loading, and mixing rate. The products (carbonates, amorphous silica, and chromite) have been physically separated (based on size, density, and magnetic properties), characterized (for chemistry, mineralogy, and morphology), and tested in intended applications (as pozzolanic carbon-negative building material). Economically, it is found that product value is the main driver for mineral carbonation, rather than, or in addition to, the sequestered CO{sub 2}. The approach of using a GPV and focusing on valuable reaction products could thus make CO{sub 2} mineralization a feasible and sustainable industrial process.

Alternative Silver Production by Environmental Sound Processing of a Sulfo Salt Silver Mineral Found in Bolivia

Directory of Open Access Journals (Sweden)

Alexander Birich

2018-02-01

Full Text Available Very often, the production of silver causes devastating environmental issues, because of the use of toxic reagents like cyanide and mercury. Due to severe environmental damage caused by humans in the last decades, the social awareness regarding the sustainable production processes is on the rise. Terms like “sustainable” and “green” in product descriptions are becoming more and more popular and producers are forced to satisfy the rising environmental awareness of their customers. Within this work, an alternative environmental sound silver recovery process was developed for a vein type silver ore from Mina Porka, Bolivia. A foregoing characterization of the input material reveals its mineral composition. In the following mineral processing, around 92.9% silver was concentrated by separating 59.5 wt. % of non-silver minerals. Nitric acid leaching of the generated concentrate enabled a silver recovery of up to 98%. The dissolved silver was then separated via copper cementation to generate a metallic silver product of >99% purity. Summarizing all process steps, a silver yield of 87% was achieved in lab scale. A final upscaling trial was conducted to prove the process’ robustness. Within this trial, almost 4 kg of metallic silver with a purity of higher than 99.5 wt. % was produced.

Sustainability in the UK construction minerals industry

OpenAIRE

Mitchell, Clive

2015-01-01

Sustainability in the UK construction minerals industry Clive Mitchell, Industrial Minerals Specialist, British Geological Survey, Nottingham, UK Email: Sustainability is not just about environmental protection it also concerns biodiversity, community relations, competence, employment, geodiversity, health and safety, resource efficiency, restoration and stakeholder accountability. The UK construction minerals industry aims to supply essential materials in a sustainabl...

Mineral-assisted production of benzene under hydrothermal conditions: Insights from experimental studies on C6 cyclic hydrocarbons

Science.gov (United States)

Venturi, Stefania; Tassi, Franco; Gould, Ian R.; Shock, Everett L.; Hartnett, Hilairy E.; Lorance, Edward D.; Bockisch, Christiana; Fecteau, Kristopher M.; Capecchiacci, Francesco; Vaselli, Orlando

2017-10-01

Volatile Organic Compounds (VOCs) are ubiquitously present at low but detectable concentrations in hydrothermal fluids from volcanic and geothermal systems. Although their behavior is strictly controlled by physical and chemical parameters, the mechanisms responsible for the production of most VOCs in natural environments are poorly understood. Among them, benzene, whose abundances were found to be relatively high in hydrothermal gases, can theoretically be originated from reversible catalytic reforming processes, i.e. multi-step dehydrogenation reactions, involving saturated hydrocarbons. However, this hypothesis and other hypotheses are difficult to definitively prove on the basis of compositional data obtained by natural gas discharges only. In this study, therefore, laboratory experiments were carried out to investigate the production of benzene from cyclic hydrocarbons at hydrothermal conditions, specifically 300 °C and 85 bar. The results of experiments carried out in the presence of water and selected powdered minerals, suggest that cyclohexane undergoes dehydrogenation to form benzene, with cyclohexene and cyclohexadiene as by-products, and also as likely reaction intermediates. This reaction is slow when carried out in water alone and competes with isomerization and hydration pathways. However, benzene formation was increased compared to these competing reactions in the presence of sulfide (sphalerite and pyrite) and iron oxide (magnetite and hematite) minerals, whereas no enhancement of any reaction products was observed in the presence of quartz. The production of thiols was observed in experiments involving sphalerite and pyrite, suggesting that sulfide minerals may act both to enhance reactivity and also as reactants after dissolution. These experiments demonstrate that benzene can be effectively produced at hydrothermal conditions through dehydrogenation of saturated cyclic organic structures and highlight the crucial role played by minerals in this

25 CFR 225.35 - Inspection of premises; books and accounts.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Inspection of premises; books and accounts. 225.35...; books and accounts. (a) Operators shall allow Indian mineral owners, their authorized representatives... submit all related reports required by the minerals agreement and applicable regulations. Books and...

Determinants of Electricity Demand in Nonmetallic Mineral Products Industry: Evidence from a Comparative Study of Japan and China

Directory of Open Access Journals (Sweden)

Gang Du

2015-06-01

Full Text Available Electricity intensity is an important indicator for measuring production efficiency. A comparative study could offer a new perspective on investigating determinants of electricity demand. The Japanese non-metallic mineral products industry is chosen as the object for comparison considering its representative position in production efficiency. By adopting the cointegration model, this paper examines influencing factors of electricity demand in Japanese and Chinese non-metallic mineral products industries under the same framework. Results indicate that although economic growth and industrial development stages are different between the two countries, major factors that affect the sectoral energy consumption are the same. Specifically, economic growth and industrial activity contribute to the growth of sectoral electricity consumption, while R&D intensity, per capita productivity and electricity price are contributors to the decline of sectoral electricity consumption. Finally, in order to further investigate the development trend of sectoral electricity demand, future electricity consumption and conservation potential are predicted under different scenarios. Electricity demand of the Chinese non-metallic mineral products industry is predicted to be 680.53 TWh (terawatt-hours in 2020 and the sectoral electricity conservation potentials are estimated to be 118.26 TWh and 216.25 TWh under the moderate and advanced electricity-saving scenarios, respectively.

Mineral industry in Australia

International Nuclear Information System (INIS)

Parbo, S.A.

1982-01-01

The paper reviews the history and growth of the mineral industry in Australia and its significance to the nation's economic growth and overseas trade, particularly over the last twenty years during which time production of coal, iron ore, manganese and mineral sands has increased greatly and new discoveries of petroleum, bauxite and nickel have given rise to major new industries. Australia ranks fourteenths in the value of world trade and is among the world's largest exporters of alumina, iron ore, mineral sands, coal, lead, zinc and nickel. Some details of production, processing and exports of the major minerals are given. Comment is made on the policies and roles of the six State Governments and the Federal Government in respect of ownership and control of the mining, processing and exporting of both energy and non-energy minerals. (orig.) [de

Overall requirements for an advanced underground coal extraction system. [environment effects, miner health and safety, production cost, and coal conservation

Science.gov (United States)

Goldsmith, M.; Lavin, M. L.

1980-01-01

Underground mining systems suitable for coal seams expoitable in the year 2000 are examined with particular relevance to the resources of Central Appalachia. Requirements for such systems may be summarized as follows: (1) production cost; (2)miner safety; (3) miner health; (4) environmental impact; and (5) coal conservation. No significant trade offs between production cost and other performance indices were found.

Gemstones and Mineral Products in the Red Sea / Indian Ocean Trade of the First Millennium

OpenAIRE

Seland, Eivind Heldaas

2017-01-01

This article addresses the role of minerals and mineral products in general and gemstones in particular in Red Sea and Western Indian .cean trade in the frst millennium. It is argued that texts from the early part of the period provide a plausible, albeit approximate overview of the origin and distribution of most kinds of precious stones, and that stable climatic and topographic factors infuencing commercial patterns enable us also to discuss the more fragmentary evidence of the later part o...

Tibia mineralization of chickens determined to meat production using a microbial phytase

Directory of Open Access Journals (Sweden)

Mária Angelovičová

2018-02-01

Full Text Available The target of the research was 6-phytase of microbial origin. It was used in feed mixtures for chickens determined to meat production. Its effect has been studied in relation to the tibia mineralization by calcium, phosphorus and magnesium. 6-phytase is a product of Aspergillus oryzae. That was obtained by means of biotechnological processes of production of commercially available enzymes. It was incorporated in the feed mixtures 0.1%. In a 38-day feeding trial, 300 one-day-old, as hatched, Cobb 500 chickens determined to meat production (100 birds per group were fed on one concentrations of dietary non-phytate phosphorus (2.32, 2.31 g.kg-1, respectively and supplemental microbial phytase (0 and 500   FTU.kg-1 feed mixtures. Control group was used to compare the results and control feed mixtures contained 4.5 g.kg-1 without microbial phytase. At days 40 it was selected 6 birds in every group, which were slaughter in accordance with the principles of welfare. Left tibias of every bird were used to determination of calcium, phosphorus and magnesium contents. According to in vivo, it was found that the addition of microbial phytase to reduced dietary non-phytate phosphorus increased concentrations of calcium (Ca, phosphorus (P and magnesium (Mg in tibia. The differences among groups were statistically significant (p <0.05. It was concluded that reducing of dietary non-phytate phosphorus on the 2.32, 2.31 g.kg-1, respectively, by monocalcium phosphate and microbial phytase supplementation in feed mixtures facilitated tibia mineralization at chicken determined to meat production. Normal 0 21 false false false EN-GB X-NONE X-NONE

30 CFR 204.205 - How do I obtain accounting and auditing relief?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I obtain accounting and auditing relief... MINERALS REVENUE MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES Accounting and Auditing Relief § 204.205 How do I obtain accounting and auditing relief? (a) To take cumulative reports and payments relief...

25 CFR 211.46 - Inspection of premises, books and accounts.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Inspection of premises, books and accounts. 211.46... premises, books and accounts. Lessees shall allow the Indian mineral owner, the Indian mineral owner's... and submit all related reports required by the lease and applicable regulations. Books and records...

Minerals industry survey 1987

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

This is the eleventh Minerals Industry Survey produced by the Australian Mining Industry Council. It represents an invaluable time series on the minerals industry's financial performance, as well as an up to date description of the industry for the latest financial year. The survey has been conceived as a supplement to and expansion of the various Australian Bureau of Statistics and Bureau of Mineral Resources, Geology and Geophysics publications which describe the exploration, mining and smelting and refining industries in Australia. The tables in this survey have been prepared by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies.

Mineral composition of fruit by-products evaluated by neutron activation analysis

International Nuclear Information System (INIS)

Gabriela de Matuoka e Chiocchetti; Nadai Fernandes de, E.A.; Macio Arruda Bacchi; Rogerio Augusto Pazim; Silvana Regina Vicino Sarries; Thais Melega Tome

2013-01-01

Brazil is one of the largest producers of fruits cropping 40 million tons per year. In agro-food processing, approximately 50 % of raw material is discarded generating large amounts of by-products. The lack of information on the nutritional quality of agroindustrial by-products precludes their potential use in the manufacture of food products accessible to all. In this context, the objective of this work was to investigate the nutritional quality of by-products of the industrial processing of fruits. Samples of bagasse, peel and seeds of several fruits (banana, camu camu, coconut, cupuacu, guava, jackfruit, mango, orange, papaya, pineapple, and soursop) were analysed by neutron activation analysis for the determination of Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sc and Zn. In general, higher levels of minerals were found in the by-products rather than in the pulps of fruits. This indicates that the use of the by-products should be encouraged, thereby reducing the economic and environmental impact of waste generated by agroindustrial processing. (author)

Methodological aspects of accounting production cost of public sector entities

Directory of Open Access Journals (Sweden)

Людмила Геннадіївна Ловінська

2015-09-01

Full Text Available The necessity of obtaining objective information about the activities of the public sector in various areas of the production is defined. It is proved an expediency of development the Project of «Guidelines for the structure of production costs» on the basis of the approved in the public sector NP(SAPS 135 "Costs". The need for accounting costs by type of activity (operational, financial and investment is marked. The composition of production costs is defined

30 CFR 206.173 - How do I calculate the alternative methodology for dual accounting?

Science.gov (United States)

2010-07-01

... measured at facility measurement points whose quality exceeds 1,000 Btu/cf are subject to dual accounting... for dual accounting? 206.173 Section 206.173 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT... the alternative methodology for dual accounting? (a) Electing a dual accounting method. (1) If you are...

Biodegradation of CuTETA, an effluent by-product in mineral processing.

Science.gov (United States)

Cushing, Alexander M L; Kelebek, Sadan; Yue, Siqing; Ramsay, Juliana A

2018-04-13

Polyamines such as triethylenetetramine (TETA) and other amine chelators are used in mineral processing applications. Formation of heavy metal complexes of these reagents as a by-product in effluent water is a recent environmental concern. In this study, Paecilomyces sp. was enriched from soil on TETA as the sole source of carbon and nitrogen and was found to degrade > 96 and 90% CuTETA complexes at initial concentrations of 0.32 and 0.79 mM respectively, following 96-h incubation. After destabilization, most of the copper (> 78%) was complexed extracellularly and the rest was associated with the cell. Mass spectroscopy results provided confirmation that copper re-complexed with small, extracellular, and organic molecules. There are no reports in the literature that Paecilomyces or any other organism can grow on TETA or CuTETA. This study is the first to show that biological destabilization of CuTETA complexes in mineral processing effluents is feasible.

Synovial cell production of IL-26 induces bone mineralization in spondyloarthritis

DEFF Research Database (Denmark)

Heftdal, Line Dam; Andersen, Thomas; Jæhger, Ditte

2017-01-01

expression in SpA patients, and examine the in vitro production of IL-26 by synovial cells and the effects of IL-26 on human osteoblasts. IL-26 was measured by ELISA in plasma and synovial fluid (SF) of 15 SpA patients and in plasma samples from 12 healthy controls. Facet joints from axial SpA patients were...... and the myofibroblast marker α-smooth-muscle-actin (αSMA) and analyzed by flow cytometry. Human osteoblasts were cultured in the presence of IL-26, and the degree of mineralization was quantified. We found that IL-26 levels in SF were increased compared with plasma (P ... in facet joints of axial SpA patients within the bone marrow. IL-26 secretion was primarily found in αSMA(+) myofibroblasts. In contrast, Th17 cells did not produce detectable amounts of IL-26. Human osteoblasts treated with IL-26 showed increased mineralization compared with untreated osteoblasts (P = 0...

Australian minerals industry 1985-6

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

The performance of the Australian mineral industry in 1985-86 was again adversely affected by low commodity prices and tight market conditions. This is shown in a survey conducted by chartered accountants Coopers and Lybrand and published by the Australian Mining Industry Council (AMIC). In a preface to the report, the president of AMIC (Sir Bruce Watson) said: In just 10 years the minerals industry has emerged as Australia's major exporter, accounting for over 40% of total Australian exports of goods. This preeminent ranking has depended on a significant investment effort, and in the creation of a very large asset base. Financing this investment, and achieving the cash flow necessary to service it, are enormous tasks.

Carbon Isotope Measurements of Experimentally-Derived Hydrothermal Mineral-Catalyzed Organic Products by Pyrolysis-Isotope Ratio Mass Spectrometry

Science.gov (United States)

Socki, Richard A.; Fu, Qi; Niles, Paul B.

2011-01-01

We report results of experiments to measure the C isotope composition of mineral catalyzed organic compounds derived from high temperature and high pressure synthesis. These experiments make use of an innovative pyrolysis technique designed to extract and measure C isotopes. To date, our experiments have focused on the pyrolysis and C isotope ratio measurements of low-molecular weight intermediary hydrocarbons (organic acids and alcohols) and serve as a proof of concept for making C and H isotope measurements on more complicated mixtures of solid-phase hydrocarbons and intermediary products produced during high temperature and high pressure synthesis on mineral-catalyzed surfaces. The impetus for this work stems from recently reported observations of methane detected within the Martian atmosphere [1-4], coupled with evidence showing extensive water-rock interaction during Martian history [5-7]. Methane production on Mars could be the result of synthesis by mineral surface-catalyzed reduction of CO2 and/or CO by Fischer-Tropsch Type (FTT) reactions during serpentization reactions [8,9]. Others have conducted experimental studies to show that FTT reactions are plausible mechanisms for low-molecular weight hydrocarbon formation in hydrothermal systems at mid-ocean ridges [10-12]. Further, recent experiments by Fu et al. [13] focus on examining detailed C isotope measurements of hydrocarbons produced by surface-catalyzed mineral reactions. Work described in this paper details the experimental techniques used to measure intermediary organic reaction products (alcohols and organic acids).

Financing and risk management of energy and mineral products in Nigeria

International Nuclear Information System (INIS)

Adepoyigi, T.

1997-01-01

Nigeria currently produces about 2 million barrels of oil per day and has proven reserves of about 21 billion barrels of oil and 150 trillion cubic feet (tcf) of gas. It is the world's 9 th largest producer of oil, OPEC's 5 th largest producer and Africa's largest producer. Nigeria also has considerable gas resources which are currently unexploited. Due to insignificant domestic demand and a current lack of export opportunities for unprocessed gas, Nigeria's total gas production is approximately 1.0 tcf per year, 85% of which is associated with crude oil production. In order to derive economic benefit from the untapped gas resources, the Federal Government, through special fiscal incentives and joint sponsorships, is actively encouraging the development of gas projects, such as the Oso NGL project (MPN/NNPC). the Escravos Gas Utilisation Project (Chevron/NNPC) and the Nigeria Liquefied Natural Gas (NLNG) project (Shell/Elf/AGIP/NNPC). These and other projects in the energy and mineral industry are primarily being financed with equity and external borrowings (debt). However, the large amount of capital required to finance a major energy or mineral project can strain the ability of many organizations to borrow money and fund the equity contributions needed as well as strain the lending levels for many banks in Nigeria. Since the available local financing is not adequate, large projects development are therefore financed from external sources

INNOVATIVE TECHNOLOGICAL SOLUTIONS IN CREATING FUNCTIONAL PRODUCTS POWER

OpenAIRE

I. V. Sergienko; A. E. Kutsova; S. V. Kutsov

2015-01-01

The article deals with a problem of functional products creation for consumers feeling need in proteins, irreplaceable amino acids, vitamins, mineral substances, food fibers, polynonsaturated fat acids. One of the possible ways to improve human nutrition is using non-traditional cultures for bread making technology containing significant amounts of fibrous substances, easily digestible protein, vitamins, unsaturated fatty acids and minerals. Taking into account the Nutrition Science requireme...

Energy accounting of materials, products, processes and services. [Ten papers

Energy Technology Data Exchange (ETDEWEB)

Verbraeck, A [ed.

1976-01-01

Ten papers were presented, namely: Units in Energy Accounting--How Are They Defined, How Are They Measured, by Dr. Malcolm Slesser; Economics of Energy Analysis, by Dr. Thomas Veach Long II; Energy Considerations in Synthetic and Natural Fibers, by Mr. A. H. Woodhead; Energy Accounting in Food Products, by Mr. Gerald Leach; Energy Analysis of Transportation Systems, by Dr. E. J. Tuininga; Energy Accounting of Packaging Materials for Liquids and Their Transport viz Bottles and Pipes, by Mr. A. Bolzinger; Energy Accounting of Steel, by Dr. A. Decker; Energy Accounting of Aluminium, by Dr. D. Altenpohl, T. S. Daugherty, and W. Blum; Energy Requirement of Some Energy Sources, by Dr. P. F. Chapman and Dr. D. F. Hemming; Energy Analysis of Materials and Structures in the Building Industry, by Professor Dr. P. C. Kreijger. A panel discussion in response to a large number of questions was chaired by Professor Dr. W. van Gool. (MCW)

Natural mineral bottled waters available on the Polish market as a source of minerals for the consumers. Part 2: The intake of sodium and potassium.

Science.gov (United States)

Gątarska, Anna; Ciborska, Joanna; Tońska, Elżbieta

Natural mineral waters are purchased and consumed according to consumer preferences and possible recommendations. The choice of appropriate water should take into account not only the general level of mineralization but also the content of individual components, including electrolytes such as sodium and potassium. Sodium is necessary to ensure the proper physiological functions of the body. It is defined as a health risk factor only when its excessive intake occurs. Potassium acts antagonistically towards sodium and calcium ions, contributes to a reduction of the volume of extracellular fluids and at the same time reduces muscle tension and permeability of cell membranes. The demand for sodium and potassium is of particular importance in people expending significant physical effort, where an increased electrolyte supply is recommended. The aim of the study was to estimate the content of sodium and potassium in natural mineral waters available in the Polish market and to evaluate the intake of those components with the commercially available mineral waters by different groups of consumers at the assumed volume of their consumption. The research material consisted of natural mineral waters of forty various brands available on the Polish market. The examined products were either produced in Poland or originated in other European countries. Among the products under examination, about 30% of the waters were imported from Lithuania, Latvia, the Czech Republic, France, Italy and Germany. A sample for analyses consisted of two package units of the examined water from different production lots. Samples for research were collected at random. The study was conducted with the same samples in in which calcium and magnesium content was determined, which was the subject of the first part of the study. The content of sodium and potassium was determined using the emission technique (acetylene-air flame), with the use of atomic absorption spectrometer – ICE 3000 SERIES – THERMO

Kinetics and Products of Chromium(VI) Reduction by Iron(II/III)-Bearing Clay Minerals.

Science.gov (United States)

Joe-Wong, Claresta; Brown, Gordon E; Maher, Kate

2017-09-05

Hexavalent chromium is a water-soluble pollutant, the mobility of which can be controlled by reduction of Cr(VI) to less soluble, environmentally benign Cr(III). Iron(II/III)-bearing clay minerals are widespread potential reductants of Cr(VI), but the kinetics and pathways of Cr(VI) reduction by such clay minerals are poorly understood. We reacted aqueous Cr(VI) with two abiotically reduced clay minerals: an Fe-poor montmorillonite and an Fe-rich nontronite. The effects of ionic strength, pH, total Fe content, and the fraction of reduced structural Fe(II) [Fe(II)/Fe(total)] were examined. The last variable had the largest effect on Cr(VI) reduction kinetics: for both clay minerals, the rate constant of Cr(VI) reduction varies by more than 3 orders of magnitude with Fe(II)/Fe(total) and is described by a linear free energy relationship. Under all conditions examined, Cr and Fe K-edge X-ray absorption near-edge structure spectra show that the main Cr-bearing product is a Cr(III)-hydroxide and that Fe remains in the clay structure after reacting with Cr(VI). This study helps to quantify our understanding of the kinetics of Cr(VI) reduction by Fe(II/III)-bearing clay minerals and may improve predictions of Cr(VI) behavior in subsurface environments.

Proceedings of the 18. international symposium on mine planning and equipment selection (MPES 2009) and the 11. international symposium on environmental issues and waste management in energy and mineral production (SWEMP 2009) : mine planning and equipment selection and environmental issues and waste management in energy and mineral production

International Nuclear Information System (INIS)

Singhal, R.K.; Mehrotra, A.; Fytas, K.; Ge, H.

2009-01-01

This conference focused on the application of innovative technologies to the mineral industries and the development of productive methods for the mining and processing industries. It was attended by participants from North and South America, Europe, Australia, Africa and Asia with backgrounds in computer sciences, mining engineering and research in mineral production. The major topics addressed regarding mine planning and equipment selection included economic and technical feasibility studies; reserve estimation; mine development; design and planning of surface and underground mines; drilling, blasting, tunneling and excavation engineering; mining equipment selection; automation and information technology; maintenance and production management for mines and mining systems; mining in terms of health, safety and the environment; and rock mechanics and geotechnical applications. The topics addressed regarding waste management in energy and mineral production included the environmental impacts of coal-fired power projects; mining and reclamation; water management; social aspects of rehabilitation; sustainable development for mineral and energy industries; remediation of contaminated soil and groundwater; health hazard and safety issues in small-scale mining; environmental issues in surface and underground mining of metalliferous, coal, uranium and industrial minerals; occupational health and safety; control of effluents from mineral processing, metallurgy and chemical plants; emerging technologies for environmental protection; reliability of waste containment structures; and tailings treatment, recycling and disposal. The conference featured 162 presentations, of which 30 have been catalogued separately for inclusion in this database. refs., tabs., figs.

Activation measurements for thermal neutrons. Part G. Natural 36Cl production in mineral samples

International Nuclear Information System (INIS)

Nolte, Eckehart; Huber, Thomas; Lazarev, Vitali; Ruehm, Werner; Kato, Kazuo; Schultz, Ludolf

2005-01-01

In the present paper, a method was developed to calculate the contribution of natural in situ production of 36 Cl in mineral samples to the 36 Cl signal induced by the neutrons from the Hiroshima bomb. Parameters used in the calculations include local erosion rates, lithospheric depth, and elemental composition for each investigated sample. It has been shown that the calculations agree within their uncertainties with 36 Cl values measured by means of accelerator mass spectrometry, in granite samples from quarries with known locations. Both calculations and measurements suggest typical 36 Cl/Cl ratios of about 10 -13 in mineral samples. (J.P.N.)

30 CFR 204.204 - What accounting and auditing relief will MMS not allow?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What accounting and auditing relief will MMS... INTERIOR MINERALS REVENUE MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES Accounting and Auditing Relief § 204.204 What accounting and auditing relief will MMS not allow? MMS will not approve your request for...

Trading Land: A Review of Approaches to Accounting for Upstream Land Requirements of Traded Products.

Science.gov (United States)

Schaffartzik, Anke; Haberl, Helmut; Kastner, Thomas; Wiedenhofer, Dominik; Eisenmenger, Nina; Erb, Karl-Heinz

2015-10-01

Land use is recognized as a pervasive driver of environmental impacts, including climate change and biodiversity loss. Global trade leads to "telecoupling" between the land use of production and the consumption of biomass-based goods and services. Telecoupling is captured by accounts of the upstream land requirements associated with traded products, also commonly referred to as land footprints. These accounts face challenges in two main areas: (1) the allocation of land to products traded and consumed and (2) the metrics to account for differences in land quality and land-use intensity. For two main families of accounting approaches (biophysical, factor-based and environmentally extended input-output analysis), this review discusses conceptual differences and compares results for land footprints. Biophysical approaches are able to capture a large number of products and different land uses, but suffer from a truncation problem. Economic approaches solve the truncation problem, but are hampered by the limited disaggregation of sectors and products. In light of the conceptual differences, the overall similarity of results generated by both types of approaches is remarkable. Diametrically opposed results for some of the world's largest producers and consumers of biomass-based products, however, make interpretation difficult. This review aims to provide clarity on some of the underlying conceptual issues of accounting for land footprints.

Efficacy Study of Metho-Chelated Organic Minerals preparation Feeding on Milk Production and Fat Percentage in dairy cows

Directory of Open Access Journals (Sweden)

Somkuwar A.P.1

2011-02-01

Full Text Available The objective of the study was to compare the effect of feeding different mineral based formulation on dairy cow production performance, namely milk yield and fat percentage. The trial was conducted with dairy cows across various stages of lactation (Early, Mid and Late stage with 30 cows per stage. The experimental treatments included: Bestmin Gold (Metho-chelated organic minerals, given 30 gms per day, Inorganic mineral preparation (Inorg. Mineral, @ 50 gms/day/ cow and control. The study lasted from 0 to 40 days. Milk yield and fat percentage of cows were measured individually on Days 0, 5, 10, 15, 20, 25, 30 and 40. The Bestmin Gold treated group (Metho-chelated organic minerals improved the milk yield, net gain in milk and the milk fat percentage of animals across the various stages of lactation as compared to in control and inorganic mineral treated group of animals. [Veterinary World 2011; 4(1.000: 19-21

Uranyl adsorption at clay mineral surfaces

Energy Technology Data Exchange (ETDEWEB)

Roesch, N. [Technische Univ. Muenchen (Germany). Fachgebiet Theoretische Chemie

2016-11-01

This first systematic survey of actinide adsorption at complex clay mineral surfaces, which provided new insights at the atomic level, is currently being extended to neptunyl NpO{sub 2}{sup +} and more complex minerals, like iron-substituted phyllosilicates. In this way we examine if the concepts developed so far can be applied more generally to support the interpretation of pertinent experiments. A further facet of these studies is to account also for the dynamic nature of the mineral/water interface by means of exemplary dynamic simulations.

Mechanisms for chemostatic behavior in catchments: implications for CO2 consumption by mineral weathering

Science.gov (United States)

Clow, David W.; Mast, M. Alisa

2010-01-01

Concentrations of weathering products in streams often show relatively little variation compared to changes in discharge, both at event and annual scales. In this study, several hypothesized mechanisms for this “chemostatic behavior” were evaluated, and the potential for those mechanisms to influence relations between climate, weathering fluxes, and CO2 consumption via mineral weathering was assessed. Data from Loch Vale, an alpine catchment in the Colorado Rocky Mountains, indicates that cation exchange and seasonal precipitation and dissolution of amorphous or poorly crystalline aluminosilicates are important processes that help regulate solute concentrations in the stream; however, those processes have no direct effect on CO2 consumption in catchments. Hydrograph separation analyses indicate that old water stored in the subsurface over the winter accounts for about one-quarter of annual streamflow, and almost one-half of annual fluxes of Na and SiO2 in the stream; thus, flushing of old water by new water (snowmelt) is an important component of chemostatic behavior. Hydrologic flushing of subsurface materials further induces chemostatic behavior by reducing mineral saturation indices and increasing reactive mineral surface area, which stimulate mineral weathering rates. CO2 consumption by carbonic acid mediated mineral weathering was quantified using mass-balance calculations; results indicated that silicate mineral weathering was responsible for approximately two-thirds of annual CO2 consumption, and carbonate weathering was responsible for the remaining one-third. CO2 consumption was strongly dependent on annual precipitation and temperature; these relations were captured in a simple statistical model that accounted for 71% of the annual variation in CO2 consumption via mineral weathering in Loch Vale.

Natural mineral bottled waters available on the Polish market as a source of minerals for the consumers. Part 1. Calcium and magnesium.

Science.gov (United States)

Gątarska, Anna; Tońska, Elżbieta; Ciborska, Joanna

2016-01-01

Natural mineral waters may be an essential source of calcium, magnesium and other minerals. In bottled waters, minerals occur in an ionized form which is very well digestible. However, the concentration of minerals in underground waters (which constitute the material for the production of bottled waters) varies. In view of the above, the type of water consumed is essential. The aim of the study was to estimate the calcium and magnesium contents in products available on the market and to evaluate calcium and magnesium consumption with natural mineral water by different consumer groups with an assumed volume of the consumed product. These represented forty different brands of natural mineral available waters on Polish market. These waters were produced in Poland or other European countries. Among the studied products, about 30% of the waters were imported from Lithuania, Latvia, Czech Republic, France, Italy and Germany. The content of calcium and magnesium in mineral waters was determined using flame atomic absorption spectrometry in an acetylene-air flame. Further determinations were carried out using atomic absorption spectrometer--ICE 3000 SERIES-THERMO-England, equipped with a GLITE data station, background correction (a deuterium lamp) as well as other cathode lamps. Over half of the analysed natural mineral waters were medium-mineralized. The natural mineral waters available on the market can be characterized by a varied content of calcium and magnesium and a high degree of product mineralization does not guarantee significant amounts of these components. Among the natural mineral waters available on the market, only a few feature the optimum calcium-magnesium proportion (2:1). Considering the mineralization degree of the studied products, it can be stated that the largest percentage of products with significant calcium and magnesium contents can be found in the high-mineralized water group. For some natural mineral waters, the consumption of 1 litre daily may

Endogenous minerals have influences on surface electrochemistry and ion exchange properties of biochar.

Science.gov (United States)

Zhao, Ling; Cao, Xinde; Zheng, Wei; Wang, Qun; Yang, Fan

2015-10-01

The feedstocks for biochar production are diverse and many of them contain various minerals in addition to being rich in carbon. Twelve types of biomass classified into 2 categories: plant-based and municipal waste, were employed to produce biochars under 350 °C and 500 °C. Their pH, point of zero net charge (PZNC), zeta potential, cation and anion exchange capacity (CEC and AEC) were analyzed. The municipal waste-based biochars (MW-BC) had higher mineral levels than the plant-based biochars (PB-BC). However, the water soluble mineral levels were lower in the MW-BCs due to the dominant presence of less soluble minerals, such as CaCO3 and (Ca,Mg)3(PO4)2. The higher total minerals in MW-BCs accounted for the higher PZNC (5.47-9.95) than in PB-BCs (1.91-8.18), though the PZNCs of the PB-BCs increased more than that of the MW-BCs as the production temperature rose. The minerals had influence on the zeta potentials via affecting the negative charges of biochars and the ionic strength of solution. The organic functional groups in PB-BCs such as -COOH and -OH had a greater effect on the CEC and AEC, while the minerals had a greater effect on that of MW-BCs. The measured CEC and AEC values had a strong positive correlation with the total amount of soluble cations and anions, respectively. Results indicated that biochar surface charges depend not only on the organic functional groups, but also on the minerals present and to some extent, minerals have more influences on the surface electrochemistry and ion exchange properties of biochar. Copyright © 2015 Elsevier Ltd. All rights reserved.

Recovering byproduct heavy minerals from sand and gravel, placer gold, and industrial mineral operations

Energy Technology Data Exchange (ETDEWEB)

Gomes, J.M.; Martinez, G.M.; Wong, M.M.

1979-01-01

The Bureau of Mines, as part of an effort to maximize minerals and metals recovery from domestic resources, has investigated the feasibility of recovering heavy minerals as byproducts from sand and gravel, placer gold, and industrial mineral operations in northern California. Sand samples from about 50 locations were treated by gravity separation to yield heavy-mineral cocentrates (black sands). Mineral compositions of the concentrates were determined by chemical analysis and mineralogical examination. Individual zircon, ilmenite, magnetite, platinum-group metals, thoria, and silica products were prepared from heavy-mineral concentrates by selective separation using low- and high-intensity magnetic, high-tension, and flotation equipment.

Mineral commodity summaries 2013

Science.gov (United States)

,

2013-01-01

Each chapter of the 2013 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2012 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. “Appendix C—Reserves and Resources” includes “Part A—Resource/Reserve Classification for Minerals” and “Part B—Sources of Reserves Data.” A directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2013 are welcomed.

Mineral commodity summaries 2014

Science.gov (United States)

,

2014-01-01

Each chapter of the 2014 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2013 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. “Appendix C—Reserves and Resources” includes “Part A—Resource/Reserve Classification for Minerals” and “Part B—Sources of Reserves Data.” A directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2014 are welcomed.

Mineral oil industry

NARCIS (Netherlands)

Brasser, L.J.; Suess, M.J.; Grefen, K.; Reinisch, D.W.

1985-01-01

In this chapter a general picture is presented of the air pollution aspects in the mineral oil industry. The complete field is covered, starting from drilling operations and the well head up to the delivery of the products to the consumer. A large field of activities as is given by the mineral oil

Predicting the Mineral Composition of Dust Aerosols. Part 1; Representing Key Processes

Science.gov (United States)

Perlwitz, J. P.; Garcia-Pando, C. Perez; Miller, R. L.

2015-01-01

Soil dust aerosols created by wind erosion are typically assigned globally uniform physical and chemical properties within Earth system models, despite known regional variations in the mineral content of the parent soil. Mineral composition of the aerosol particles is important to their interaction with climate, including shortwave absorption and radiative forcing, nucleation of cloud droplets and ice crystals, heterogeneous formation of sulfates and nitrates, and atmospheric processing of iron into bioavailable forms that increase the productivity of marine phytoplankton. Here, aerosol mineral composition is derived by extending a method that provides the composition of a wet-sieved soil. The extension accounts for measurements showing significant differences between the mineral fractions of the wetsieved soil and the emitted aerosol concentration. For example, some phyllosilicate aerosols are more prevalent at silt sizes, even though they are nearly absent at these diameters in a soil whose aggregates are dispersed by wet sieving. We calculate the emitted mass of each mineral with respect to size by accounting for the disintegration of soil aggregates during wet sieving. These aggregates are emitted during mobilization and fragmentation of the original undispersed soil that is subject to wind erosion. The emitted aggregates are carried far downwind from their parent soil. The soil mineral fractions used to calculate the aggregates also include larger particles that are suspended only in the vicinity of the source. We calculate the emitted size distribution of these particles using a normalized distribution derived from aerosol measurements. In addition, a method is proposed for mixing minerals with small impurities composed of iron oxides. These mixtures are important for transporting iron far from the dust source, because pure iron oxides are more dense and vulnerable to gravitational removal than most minerals comprising dust aerosols. A limited comparison to

Mineral composition of pulp and production of the yellow passion fruit with organic and conventional fertilizers.

Science.gov (United States)

Pacheco, Anália Lúcia Vieira; Pagliarini, Mateus Francisco; de Freitas, Gilberto Bernardo; Santos, Ricardo Henrique Silva; Serrão, José Eduardo; Zanuncio, José Cola

2017-02-15

The use of organic foods has been increased in the world. Organic fertilizers, like cattle manure, have emerged as an important component of the organic system production. The production, mass, size, and mineral composition of passion fruit pulp were evaluated when treated with a mineral fertilizer (control) (MIN) or cattle manure at a single dose equivalent to potassium fertilizer (ORG) or double dose (2×ORG). The production and the numbers of fruits of plants treated with MIN and 2×ORG was higher than with ORG. The level of nitrogen (N), phosphorus (P), zinc (Zn), iron (Fe), and copper (Cu) in the fruit pulp was similar with all three fertilizers, but the calcium (Ca) and magnesium (Mg) was higher with ORG and 2×ORG. The number and weight of the fruits of passion fruit treated with 2×ORG were similar to those with MIN fertilizer, but they contained more Ca and Mg. Copyright © 2016 Elsevier Ltd. All rights reserved.

Vitamins and minerals in the traditional Greenland diet

DEFF Research Database (Denmark)

Andersen, S. M.

The relative importance of traditional Greenlandic food items has diminished during the last decades. Today these account for 25% of the Greenland diet with a dominance of fish, seabirds, and marine mammals. This report synthesises the available information on concentrations of vitamins and miner......The relative importance of traditional Greenlandic food items has diminished during the last decades. Today these account for 25% of the Greenland diet with a dominance of fish, seabirds, and marine mammals. This report synthesises the available information on concentrations of vitamins...... and minerals in the various food items that form the traditional Greenlandic diet. However, through this diet people in Greenland are also exposed to a high intake of heavy metals and organochlorines, due to a contamination of many of these food items. In combination with information on the concentration...... of contaminants, the information about vitamins and minerals will potentially make it possible to adjust the diet in Greenland, taking both nutrients and contaminants into account...

Characterization of cement minerals, cements and their reaction products at the atomic and nano scale

DEFF Research Database (Denmark)

Skibsted, Jørgen; Hall, Christopher

2008-01-01

Recent advances and highlights in characterization methods are reviewed for cement minerals, cements and their reaction products. The emphasis is on X-ray and neutron diffraction, and on nuclear magnetic resonance methods, although X-ray absorption and Raman spectroscopies are discussed briefly...

Characterization of cement minerals, cements and their reaction products at the atomic and nano scale

International Nuclear Information System (INIS)

Skibsted, Jorgen; Hall, Christopher

2008-01-01

Recent advances and highlights in characterization methods are reviewed for cement minerals, cements and their reaction products. The emphasis is on X-ray and neutron diffraction, and on nuclear magnetic resonance methods, although X-ray absorption and Raman spectroscopies are discussed briefly

Accounting for Berkson and Classical Measurement Error in Radon Exposure Using a Bayesian Structural Approach in the Analysis of Lung Cancer Mortality in the French Cohort of Uranium Miners.

Science.gov (United States)

Hoffmann, Sabine; Rage, Estelle; Laurier, Dominique; Laroche, Pierre; Guihenneuc, Chantal; Ancelet, Sophie

2017-02-01

Many occupational cohort studies on underground miners have demonstrated that radon exposure is associated with an increased risk of lung cancer mortality. However, despite the deleterious consequences of exposure measurement error on statistical inference, these analyses traditionally do not account for exposure uncertainty. This might be due to the challenging nature of measurement error resulting from imperfect surrogate measures of radon exposure. Indeed, we are typically faced with exposure uncertainty in a time-varying exposure variable where both the type and the magnitude of error may depend on period of exposure. To address the challenge of accounting for multiplicative and heteroscedastic measurement error that may be of Berkson or classical nature, depending on the year of exposure, we opted for a Bayesian structural approach, which is arguably the most flexible method to account for uncertainty in exposure assessment. We assessed the association between occupational radon exposure and lung cancer mortality in the French cohort of uranium miners and found the impact of uncorrelated multiplicative measurement error to be of marginal importance. However, our findings indicate that the retrospective nature of exposure assessment that occurred in the earliest years of mining of this cohort as well as many other cohorts of underground miners might lead to an attenuation of the exposure-risk relationship. More research is needed to address further uncertainties in the calculation of lung dose, since this step will likely introduce important sources of shared uncertainty.

Produção de helicônia Golden Torch influenciada pela adubação mineral e orgânica Production of helicônia Golden Torch as influenced by the mineral and organic manure

Directory of Open Access Journals (Sweden)

Abel W. de Albuquerque

2010-10-01

Full Text Available A agrofloricultura alagoana demanda ações articuladas nos segmentos da cadeia produtiva, a fim de reduzir os custos com insumos como os adubos minerais, que representam um percentual significativo. Este trabalho objetivou avaliar os componentes de produção da Helicônia Golden Torch submetidos às adubações mineral, orgânica e organomineral. As variáveis analisada foram: número de perfilhos por touceira, número de haste floral, comprimento da haste floral, diâmetro da haste floral, comprimento da bráctea, número de folhas por haste floral e área foliar por haste floral. Os resultados obtidos mostraram que a adubação orgânica e a organomineral proporcionaram as maiores produtividade. A adubação orgânica promoveu maior produtividade dos componentes de produção que o tratamento não adubado e a associação das adubações mineral e orgânica são uma prática que contribuiu para a otimização da adubação da cultura.The cut tropical flower market in Alagoas-Brazil demands articulate actions in the production chain to reduce costs with mineral fertilizers that represent a significant percentage of the production costs. This work had the objective of evaluating the production components of the tropical flower heliconia Golden Torch submitted to mineral, organic and organic-mineral fertilization. The following variables were evaluated: number of the offshoots per plant, number of flowers stalk per bunch, length and diameter of the flowers stalk, length of the bracts, number of the leaves and leaf area per plant. The results showed that organic and organic-mineral fertilization promoted the highest harvest of flower stalks. The organic fertilization promoted higher yield of the production components in comparison to control and the organic-mineral fertilization treatments. The association of mineral fertilized and organic manure improved the fertilization practice in this crop.

A novel plasmid addiction system for large-scale production of cyanophycin in Escherichia coli using mineral salts medium.

Science.gov (United States)

Kroll, Jens; Klinter, Stefan; Steinbüchel, Alexander

2011-02-01

Hitherto the production of the biopolymer cyanophycin (CGP) using recombinant Escherichia coli strains and cheap mineral salts medium yielded only trace amounts of CGP (dapE disrupts the native succinylase pathway in E. coli and (2) the complementation by the plasmid-encoded artificial aminotransferase pathway mediated by the dapL gene from Synechocystis sp. PCC 6308, which allows the synthesis of the essential lysine precursor L,L-2,6-diaminopimelate. In addition, this plasmid also harbors cphAC595S, an engineered cyanophycin synthetase gene responsible for CGP production. Cultivation experiments in Erlenmeyer flask and also in bioreactors in mineral salts medium without antibiotics revealed an at least 4.5-fold enhanced production of CGP in comparison to control cultivations without PAS. Fermentation experiments with culture volume of up to 400 l yielded a maximum of 18% CGP (w/w) and a final cell density of 15.2 g CDM/l. Lactose was used constantly as an effective inducer and carbon source. Thus, we present a convenient option to produce CGP with E. coli at a technical scale without the need to add antibiotics or amino acids using the mineral salts medium designed in this study.

Mineral Resource Information System for Field Lab in the Osage Mineral Reservation Estate

Energy Technology Data Exchange (ETDEWEB)

Carroll, H.B.; Johnson, William I.

1999-04-27

The Osage Mineral Reservation Estate is located in Osage County, Oklahoma. Minerals on the Estate are owned by members of the Osage Tribe who are shareholders in the Estate. The Estate is administered by the Osage Agency, Branch of Minerals, operated by the U.S. Bureau of Indian Affairs (BIA). Oil, natural gas, casinghead gas, and other minerals (sand, gravel, limestone, and dolomite) are exploited by lessors. Operators may obtain from the Branch of Minerals and the Osage Mineral Estate Tribal Council leases to explore and exploit oil, gas, oil and gas, and other minerals on the Estate. Operators pay a royalty on all minerals exploited and sold from the Estate. A mineral Resource Information system was developed for this project to evaluate the remaining hydrocarbon resources located on the Estate. Databases on Microsoft Excel spreadsheets of operators, leases, and production were designed for use in conjunction with an evaluation spreadsheet for estimating the remaining hydrocarbons on the Estate.

Late Byzantine mineral soda high alumina glasses from Asia Minor: a new primary glass production group.

Directory of Open Access Journals (Sweden)

Nadine Schibille

Full Text Available The chemical characterisation of archaeological glass allows the discrimination between different glass groups and the identification of raw materials and technological traditions of their production. Several lines of evidence point towards the large-scale production of first millennium CE glass in a limited number of glass making factories from a mixture of Egyptian mineral soda and a locally available silica source. Fundamental changes in the manufacturing processes occurred from the eight/ninth century CE onwards, when Egyptian mineral soda was gradually replaced by soda-rich plant ash in Egypt as well as the Islamic Middle East. In order to elucidate the supply and consumption of glass during this transitional period, 31 glass samples from the assemblage found at Pergamon (Turkey that date to the fourth to fourteenth centuries CE were analysed by electron microprobe analysis (EPMA and by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS. The statistical evaluation of the data revealed that the Byzantine glasses from Pergamon represent at least three different glass production technologies, one of which had not previously been recognised in the glass making traditions of the Mediterranean. While the chemical characteristics of the late antique and early medieval fragments confirm the current model of glass production and distribution at the time, the elemental make-up of the majority of the eighth- to fourteenth-century glasses from Pergamon indicate the existence of a late Byzantine glass type that is characterised by high alumina levels. Judging from the trace element patterns and elevated boron and lithium concentrations, these glasses were produced with a mineral soda different to the Egyptian natron from the Wadi Natrun, suggesting a possible regional Byzantine primary glass production in Asia Minor.

Energy consumption analysis of Spanish food and drink, textile, chemical and non-metallic mineral products sectors

International Nuclear Information System (INIS)

Aranda-Usón, Alfonso; Ferreira, Germán; Mainar-Toledo, M.D.; Scarpellini, Sabina; Llera Sastresa, Eva

2012-01-01

This paper provides quantitative information for energy consumption from four different industry sectors based on an energy analysis obtained by means of in-situ energy audits and complementary information. The latter information was taken from Saving Strategy and Energy Efficiency in Spain (Estrategia de Ahorro y Eficiencia Energética en España 2004–2010, E4) documents and the 2009 Industrial Survey of Spain from the National Statistics Institute (Instituto Nacional de Estadística, INE). The results show an estimate of energy consumption for each sector, namely Spanish food, drink and tobacco (9.6%), textile (4.5%), chemical (14.7%), and non-metallic mineral products (24.3%), as well as the degree of inefficiency for each, obtained by means of a stochastic frontier production function model. These results are combined with the energy consumption analysis to identify potential energy saving opportunities around 20.0% of the total energy consumption for all studied sectors. These energy saving opportunities are classified according to thermal or electrical energy consumption and percentage savings of the total energy consumption. -- Highlights: ► This study presents the analysis of four Spanish energy-consuming industrial sectors. ► The four selected sectors account for 33.0% of the total industrial SMEs. ► An audit was carried out in several factories from each analysed industrial sector. ► Stochastic Cobb-Douglas frontiers were used to estimate production frontiers. ► Potential energy saving opportunities around 20.0% of the total energy consumption.

METHODOLOGICAL BASES OF PRACTICAL APPLICATION OF PRODUCTION COSTS MANAGEMENT ACCOUNTING AT OIL AND FAT ENTERPRISES

Directory of Open Access Journals (Sweden)

E. Mykhalska

2014-12-01

Full Text Available Implementing of models of production costs management accounting in response to responsibility centers into Ukrainian oil and fat enterprises is the aim of their full optimization in terms of current competitive market. Setting production costs as an object of every single responsibility center will enable to update the whole range of accounting operations on costs paperwork, used raw and other materials assessment, cost recovery from labour costs with benefits-related deduction, depreciation recovery due to season production variability, services distribution of auxiliary and service departments and general production costs. In this regard, referring to the current costs accounting at oil and fat enterprises of Ukraine it should be admitted that the main purpose of the article is to explore the above-mentioned issues.

Mineral Commodity Summaries 2009

Science.gov (United States)

,

2009-01-01

Each chapter of the 2009 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2008 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Because specific information concerning committed inventory was no longer available from the Defense Logistics Agency, National Defense Stockpile Center, that information, which was included in earlier Mineral Commodity Summaries publications, has been deleted from Mineral Commodity Summaries 2009. National reserves and reserve base information for most mineral commodities found in this report, including those for the United States, are derived from a variety of sources. The ideal source of such information would be comprehensive evaluations that apply the same criteria to deposits in different geographic areas and report the results by country. In the absence of such evaluations, national reserves and reserve base estimates compiled by countries for selected mineral commodities are a primary source of national reserves and reserve base information. Lacking national assessment information by governments, sources such as academic articles, company reports, common business practice, presentations by company representatives, and trade journal articles, or a combination of these, serve as the basis for national reserves and reserve base information reported in the mineral commodity sections of this publication. A national estimate may be assembled from the following: historically reported

Effects of Dutch mineral policies on land prices.

NARCIS (Netherlands)

Boots, M.G.; Oude Lansink, A.G.J.M.; Peerlings, J.H.M.

1998-01-01

Land prices were analyzed by shadow prices of individual
farms and an exogenous supply of land,
taking account of mineral surplus taxes and farm
characteristics. Mineral policies have a substantial
effect on land prices in the Netherlands and result
in more extensive dairy

Australian mineral industry annual review for 1982

Energy Technology Data Exchange (ETDEWEB)

1984-01-01

The Australian mineral industry annual review records the activities and development of the Australian mineral industry and reports production, consumption, treatment, trade, prices, new developments, exploration and resources for mineral commodities including fuels, and summarises equivalent developments abroad. The present volume reviews activities and developments in 1982. Part 1 (General Review) - after briefly surveying the world mineral industry, summarises developments in the Australian mineral industry as a whole, under the headings: the industry in the national economy; important recent developments; production; overseas trade; prices; exploration expenditure; investment; income tax; royalties; structural data; wages and salaries; industrial disputes; and government assistance, legislation and controls. Part 2 (Commodity Review) - covers industrial mineral commodities, from abrasives to zirconium. Part 3 (Mining Census) - tabulates statistics extracted from the mining census, together with some mineral processing statistics from the manufacturing census. Part 4 (Miscellaneous) - tabulates quantum and value data on mineral output provided by State departments of mines and their equivalents.

Indochina area mineral prospects

Energy Technology Data Exchange (ETDEWEB)

1990-10-05

Prospects for commercial mining of various minerals are considered for Kampuchea (Cambodia), Laos, Vietnam, Myanmar (Burma) and Thailand. Mineral production is much below its geologic potential for economic and political reasons. Resource potential is limited to tin, tungsten, lead and zinc, barytes and gemstones, and coal. 1 fig.

A world of minerals in your mobile device

Science.gov (United States)

Jenness, Jane E.; Ober, Joyce A.; Wilkins, Aleeza M.; Gambogi, Joseph

2016-09-15

Mobile phones and other high-technology communications devices could not exist without mineral commodities. More than one-half of all components in a mobile device—including its electronics, display, battery, speakers, and more—are made from mined and semiprocessed materials (mineral commodities). Some mineral commodities can be recovered as byproducts during the production and processing of other commodities. As an example, bauxite is mined for its aluminum content, but gallium is recovered during the aluminum production process. The images show the ore minerals (sources) of some mineral commodities that are used to make components of a mobile device. On the reverse side, the map and table depict the major source countries producing these mineral commodities along with how these commodities are used in mobile devices. For more information on minerals, visit http://minerals.usgs.gov.

Radioactive mineral occurences of Colorado and bibliography

International Nuclear Information System (INIS)

Nelson-Moore, J.L.; Collins, D.B.; Hornbaker, A.L.

1978-01-01

This two-part report provides an essentially complete listing of radioactive occurrences in Colorado, with a comprehensive bibliography and bibliographic cross-indexes. Part 1 lists approximately 3000 known radioactive occurrences with their locations and brief accounts of the geology, mineralogy, radioactivity, host rock, production data, and source of data for each. The occurrences are classified by host rock and plotted on U.S. Geological Survey 1 0 x 2 0 topographic quadrangle maps with a special 1 : 100,000-scale base map for the Uravan mineral belt. Part 2 contains the bibliography of approximately 2500 citations on radioactive mineral occurrences in the state, with cross-indexes by county, host rock, and the special categories of ''Front Range,'' ''Colorado Plateau,'' and ''thorium.'' The term ''occurrence'' as used in this report is defined as any site where the concentration of uranium or thorium is at least 0.01% or where the range of radioactivity is greater than twice the background radioactivity. All citations and occurrence data are stored on computer diskettes for easy retrieval, correction, and updating

Technological roadmap for production, clean and efficient use of Brazilian mineral coal: 2012 to 2035; Roadmap tecnologico para producao, uso limpo e eficiente do carvao mineral nacional: 2012 a 2035

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

Brazil has one of the largest coal reserves in the world, but it is not among the largest producers in the world. Coal in Brazil, has two main applications: use as fuel for power generation, including industrial energy use, and in the iron and steel industry for production of coke, pig iron and steel. In the updated rates of use, the coal reserves can provide coal for more than 500 years. A public policy to better take advantage of the mineral coal, with horizons in 2022 and 2035 and the guidelines and strategies proposed for the country to reach the production, clean and efficient use of the expressive quantity of the mineral national coal are presented.

REGULAR USE OF MILK AND DAIRY PRODUCTS, AND ITS INFLUENCE ON BONE MINERAL DENSITY IN CHILDREN: SYSTEMATIC REVIEW

Directory of Open Access Journals (Sweden)

R.T. Saygitov

2008-01-01

Full Text Available This article is dedicated to the analysis of randomized controlled trials, studying influence of milk and diary products (yoghurt, cheese, including fortified with calcium ones, on bone mineral density (BMD in children. It was shown that addition of such products to the dietary intake of children and adolescents in 9–24 months leads to additional increase of BMD. This property expressed in fortified foods more then in milk in usual (habitual quantity. In conditions of optimal nutrition, while physiological needs of child's organism in calcium is provided owing to regular use of diary products, a necessity of addition of complementary doses of this macro element to the dietary intake is not proved. Besides, the data from controlled studies showed that adherence of children to some diary products (fortified cheese, for example, is inadequately low. Use of milk, including aromatized one, and yoghurt, allows considerable increasing of compliance. It's important for forming of wholesome nutritive preferences and habits in children.Key words: children, milk, diary products, calcium, bone mineral density.

Mineral Systems, Their Types, and Distribution in Nature: 2. Products of Contemporary Fumarole Activity at Tolbachik Volcano (Russia) and Vulcano (Italy)

Science.gov (United States)

Krivovichev, V. G.; Charykova, M. V.

2017-12-01

The number of mineral species in which a certain chemical element is species-defining (according to statistical data up to 2015) has been specified. Seventy chemical elements are species-defining for 5044 minerals. The following chemical elements lead in the composition of minerals (number of mineral species in parentheses): oxygen (4115), hydrogen (2800), silicon (1471), calcium (1167), sulfur (1056), aluminium (985), sodium (949), iron (945), copper (636), phosphorus (597), arsenic (594), and magnesium (571). The distribution of mineral species by various systems in the products of contemporary fumarole activity at two volcanoes, Tolbachik in Kamchatka, Russia, and Vulcano in Sicily, Italy, has been compared. These locations were also compared for the distribution of species-defining elements. Thus, it has been determined that in fumaroles of both volcanoes, Tl, S, Cl, F and Na are "excessive," present in minerals in elevated amounts, whereas H, Ca, Fe, and Mn are "deficient." The abundance of Cu, Se, V, Mg, Zn, As, and F in minerals at Tolbachik is higher than the global mean values of these elements in the Earth's crust, whereas the abundance is significantly lower at Vulcano. Sn, I, Br, K, Pb, Al, Fe, and Bi demonstrate the opposite behavior. Comparison of the Yadovitaya and Arsenatnaya fumaroles at the Tolbachik volcano showed that the products of the former are richer in H, Cl, Cu, S, K, O, Al, Fe, and Pb, and poorer in As, Ca, Mg, and Na as species-defining elements. In addition, V-and Mo-bearing minerals are found only at Yadovitaya, whereas minerals containing F, Ti, B, Te, and Zn are known only at Arsenatnaya.

Diseases of uranium miners and other underground miners exposed to radon

International Nuclear Information System (INIS)

Samet, J.M.

1991-01-01

Excess lung cancer has been demonstrated in many groups of underground miners exposed to radon, including uranium miners and those mining other substances in radon-contaminated mines. In the United States, most underground uranium mines had shut down by the late 1980s, but occupational exposure to radon progeny remains a concern for many other types of underground miners and other underground workers. Worldwide, uranium mining continues, with documented production in Canada, South Africa and other African countries, and Australia. Thus, radon in underground mines remains a significant occupational hazard as the end of the twentieth century approaches.39 references

Fungal biomineralization of montmorillonite and goethite to short-range-ordered minerals

Science.gov (United States)

Li, Huan; Hu, Shuijin; Polizzotto, Matthew L.; Chang, Xiaoli; Shen, Qirong; Ran, Wei; Yu, Guanghui

2016-10-01

Highly reactive nano-scale minerals, e.g., short-range-ordered minerals (SROs) and other nanoparticles, play an important role in soil carbon (C) retention. Yet, the mechanisms that govern biomineralization from bulk minerals to highly reactive nano-scale minerals remain largely unexplored, which critically hinders our efforts toward managing nano-scale minerals for soil C retention. Here we report the results from a study that explores structural changes during Aspergillus fumigatus Z5 transformation of montmorillonite and goethite to SROs. We examined the morphology and structure of nano-scale minerals, using high-resolution transmission electron microscopy, time-resolved solid-state 27Al and 29Si NMR, and Fe K-edge X-ray absorption fine structure spectroscopy combined with two dimensional correlation spectroscopy (2D COS) analysis. Our results showed that after a 48-h cultivation of montmorillonite and goethite with Z5, new biogenic intracellular and extracellular reactive nano-scale minerals with a size of 3-5 nm became abundant. Analysis of 2D COS further suggested that montmorillonite and goethite were the precursors of the dominant biogenic nano-scale minerals. Carbon 1s near edge X-ray absorption fine structure (NEXAFS) spectra and their deconvolution results demonstrated that during fungus Z5 growth, carboxylic C (288.4-289.1 eV) was the dominant organic group, accounting for approximately 34% and 59% in the medium and aggregates, respectively. This result suggested that high percentage of the production of organic acids during the growth of Z5 was the driving factor for structural changes during biomineralization. This is, to the best of our knowledge, the first report of the structural characterization of nano-scale minerals by 2D COS, highlighting its potential to elucidate biomineralization pathways and thus identify the precursors of nano-scale minerals.

Evaluation of mineral oil saturated hydrocarbons (MOSH and mineral oil aromatic hydrocarbons (MOAH in pure mineral hydrocarbon-based cosmetics and cosmetic raw materials using 1H NMR spectroscopy [version 2; referees: 3 approved

Directory of Open Access Journals (Sweden)

Dirk W. Lachenmeier

2017-08-01

Full Text Available Mineral hydrocarbons consist of two fractions, mineral oil saturated hydrocarbons (MOSH and mineral oil aromatic hydrocarbons (MOAH. MOAH is a potential public health hazard because it may include carcinogenic polycyclic compounds. In the present study, 400 MHz nuclear magnetic resonance (NMR spectroscopy was introduced, in the context of official controls, to measure MOSH and MOAH in raw materials or pure mineral hydrocarbon final products (cosmetics and medicinal products. Quantitative determination (qNMR has been established using the ERETIC methodology (electronic reference to access in vivo concentrations based on the PULCON principle (pulse length based concentration determination. Various mineral hydrocarbons (e.g., white oils, paraffins or petroleum jelly were dissolved in deuterated chloroform. The ERETIC factor was established using a quantification reference sample containing ethylbenzene and tetrachloronitrobenzene. The following spectral regions were integrated: MOSH δ 3.0 – 0.2 ppm and MOAH δ 9.2 - 6.5, excluding solvent signals. Validation showed a sufficient precision of the method with a coefficient of variation <6% and a limit of detection <0.1 g/100 g. The applicability of the method was proven by analysing 27 authentic samples with MOSH and MOAH contents in the range of 90-109 g/100 g and 0.02-1.10 g/100 g, respectively. It is important to distinguish this new NMR-approach from the hyphenated liquid chromatography-gas chromatography methodology previously used to characterize MOSH/MOAH amounts in cosmetic products. For mineral hydrocarbon raw materials or pure mineral hydrocarbon-based cosmetic products, NMR delivers higher specificity without any sample preparation besides dilution. Our sample survey shows that previous methods may have overestimated the MOAH amount in mineral oil products and opens new paths to characterize this fraction. Therefore, the developed method can be applied for routine monitoring of consumer

Model Predictive Control of Mineral Column Flotation Process

Directory of Open Access Journals (Sweden)

Yahui Tian

2018-06-01

Full Text Available Column flotation is an efficient method commonly used in the mineral industry to separate useful minerals from ores of low grade and complex mineral composition. Its main purpose is to achieve maximum recovery while ensuring desired product grade. This work addresses a model predictive control design for a mineral column flotation process modeled by a set of nonlinear coupled heterodirectional hyperbolic partial differential equations (PDEs and ordinary differential equations (ODEs, which accounts for the interconnection of well-stirred regions represented by continuous stirred tank reactors (CSTRs and transport systems given by heterodirectional hyperbolic PDEs, with these two regions combined through the PDEs’ boundaries. The model predictive control considers both optimality of the process operations and naturally present input and state/output constraints. For the discrete controller design, spatially varying steady-state profiles are obtained by linearizing the coupled ODE–PDE model, and then the discrete system is obtained by using the Cayley–Tustin time discretization transformation without any spatial discretization and/or without model reduction. The model predictive controller is designed by solving an optimization problem with input and state/output constraints as well as input disturbance to minimize the objective function, which leads to an online-solvable finite constrained quadratic regulator problem. Finally, the controller performance to keep the output at the steady state within the constraint range is demonstrated by simulation studies, and it is concluded that the optimal control scheme presented in this work makes this flotation process more efficient.

Scientific basis of a new method for hydrophobic modification of mineral binders using peat products

Directory of Open Access Journals (Sweden)

O. Misnikov

2016-10-01

Full Text Available This study deals with the issue of caking of mineral binding materials during storage and transportation. The author conducted a critical analysis of known methods for the protection of cement from exposure to moisture and water vapour. Common disadvantages of these methods are their low effectiveness and complexity of use in industrial and domestic environments. This article introduces a new method for hydrophobising construction materials using peat, which achieves high water repellency in the modified materials with relatively low expenditure on organic materials. The author proposes film coating of the mineral particles of dispersed hydrophilic materials as a protection mechanism against their undesirable exposure to moisture during storage. The insulating film consists of hydrophobic products (bitumens released during thermal decomposition of the organic matter in peat. The estimated thickness of the bitumen film is about 12 nm and it does not adversely affect the flow properties of the powder. A model of the formation of film coatings on mineral particles is provided and their elemental chemical composition is determined. It is shown experimentally that the modified hydrophobic cement is protected from exposure to liquid vapours, and optimal values of organic component concentrations in the dispersed mineral matter that do not reduce the strength of cement mortar are identified.

INTER-PHASE CONTACTS IN BITUMEN-MINERAL SYSTEMS AND THEIR STRENGTHENING

Directory of Open Access Journals (Sweden)

Ya. N. Kovalev

2014-01-01

Full Text Available Presently bitumen-mineral materials (including asphalt-concrete comprise nearly 98 % for construction of expensive road pavement. Large resources of local minerals (quartz sand and industrial wastes in the form of used molding sand (foundry by-product are widely applied for reduction of their cost. Such approach is economically and ecologically reasonable but it requires its justification because an adhesion interaction in the bitumen-quartz substrate system (with SiO2 more than 95 % is rather poor in natural state and due to water action it is still more decreasing. In this connection an objective necessity arises to modify significantly technology of bitumen-mineral compositions for ensuring reliability of road pavements while using silicon components.All the ideas pertaining to strengthening of adhesion bonds in the “quartz mineral substrate - bitumen” system are traditionally of physical and chemical nature and they presuppose mainly usage of colloidal chemistry methods. The paper considers the matter on the basis of molecular kinetic theory of matter taking into account the fact that there is absence of generally accepted calculations for intermolecular interactions of components in the SiO2 - organic matrix material system.As a theoretical supposition the following well-known regulatory principle in physics is used: as every atom or molecular have its own electromagnetic field then action of external electromagnetic fields initiates their interaction that leads to excitement of electrons, deformations and rupture of chemical bonds. Literature analysis shows that the existing electric bonds between components of the SiO2 - organic matrix material system provide the possibility to apply various electro-physical methods having an effect on these components with the purpose to strengthen their adhesion interaction.The paper investigates matters for determination of bond energy during physical adsorption and adhesion in the SiO2 - organic

THE USE OF FLUORIDE CONTAINING MINERAL WATER IN WORT PRODUCTION

Directory of Open Access Journals (Sweden)

Gunka Yonkova

2011-12-01

Full Text Available The present work aims to study the quality of wort produced using fluoride containing mineral water. The results show that the mineral water has a negative impact on the enzymatic destruction of starch, proteins, color intensity and pH of the wort. The changes of pH during mashing process using tap and mineral water was studied. The lower acidity of wort obtained using mineral water didn’t change during the brewing process. The fluoride content of beer is lower than 5 mg.L-1 when wort is produced using mineral and tap water in 1:1 ratio and citric acid for pH correction. At the same time, the final degree of fermentation, α-amine nitrogen content and the intensity of color of produced wort are close to the control sample. The changes in fluoride ion concentration are monitored using ion-selective potentiometry. The fluoride content is decreased from 5.7 to 4.75 mg.L-1, the most intense change is observed during the mashing process.

Clay minerals in sandstone uranium deposits: radwaste applications

International Nuclear Information System (INIS)

Brookins, D.G.

1990-01-01

Clay minerals play an important role in the genesis of uranium deposits in sandstones. They incorporate the rate earths (REE), U, Sb, Th, Cs, Rb, Sr, Y, Ba, and even small amounts of chalcophiles. These minerals possess analog elements for many of the radwaste fission products as well as actinides and some actinide daughters. In sandstone uranium deposits, clay minerals are also associated with sulfide minerals, usually pyrite, and organic carbonaceous matter. The primary clay minerals are usually smectites, illites, chlorites and mixed layer varieties. The integrity of these clay minerals is demonstrated by their retention of formational-mineralization ages determined by Rb-Sr geochronologic investigation of the Grants Mineral Belt of the United States. The importance of the clay minerals as analog for parts of the multi-barrier concept in radwaste disposal is their ability to impede water penetration into - and movement of key elements out of uranium rich zones. The clay minerals further sorb and in other ways incorporate into their structures many fission products and actinide analogs from man-made nuclear wastes. 22 refs., 1 fig., 3 tabs

MANAGERIAL ACCOUNTING AND PRICING FOR SALE OF GOODS AND PRODUCTS IN TRADE AND PUBLIC CATERING

Directory of Open Access Journals (Sweden)

TUHARI Tudor

2017-06-01

Full Text Available The most relevant problems of accounting and control in the sphere of commodity exchange are the reliable determination of the cost of mass goods and products during their storage and sale, as well as the operational orientation in pricing, taking into account the demand and supply in the interests of obtaining the necessary profit at an appropriate level of profitability. In the case of the sum stock accounting method for the goods in the retail trade and public catering, the especially important element of the accounting is the process of formation of retail sales prices and calculation of production cost of sales and profit of the enterprise. The article mainly focuses on the method of determining the retail sales prices for goods and products in the area of trade and public catering, respectively, through the use of trade mark-ups in percentage terms in relation not to the purchase, but to retail sales prices including VAT. Determining the cost of sales and its accounting is recommended to adjust only at the end of the month based on the calculation of the average percentage of trade mark-up (margin.

Influence of oil and mineral characteristics on oil-mineral interaction

International Nuclear Information System (INIS)

Wood, P.A.; Lunel, T.; Daniel, F.; Swannell, R.; Lee, K.; Stoffyn-Egli, P.

1998-01-01

A laboratory study was conducted to simulate the process of oil-mineral interaction in seawater. Thirteen different crudes, emulsions and oil products were used in the study. The objective was to improve the fundamental understanding of the characteristics of oils and minerals that influence the process. The findings of an initial phase of studies based on the swirling flask and marine simulation procedures were also described. Oil content associated with flocs to oil and mineral characteristics were discussed. Emulsions were prepared at 10 degrees C by vigorously mixing the oil with excess artificial seawater in a Kilner jar using a high shear homogenizer. Topped oils were prepared by distillation to 250 degrees C. The biodegraded oil was prepared from the topped crude oil. Biodegradation was achieved over a 28 day period using natural seawater and naturally occurring hydrocarbon degraders. The relationships between oil concentration, oil density and mineral exchange capacity were determined. The study showed that greater oil concentrations in the water column could be expected with (1) the presence of mineral fines, (2) minerals with greater cation exchange rates, (3) minerals with finer sizes, and (4) oils of lower viscosity and density. It was determined that in coastal waters the viscosity of the oil/emulsion will likely be the main factor affecting oil-mineral interactions. The viscosity limit for allowing oil fines interaction is likely to be dependent on the energy in the coastal zone affected by the oil pollution. 18 refs., 5 tabs., 13 figs

Accounting for forest carbon pool dynamics in product carbon footprints: Challenges and opportunities

International Nuclear Information System (INIS)

Newell, Joshua P.; Vos, Robert O.

2012-01-01

Modification and loss of forests due to natural and anthropogenic disturbance contribute an estimated 20% of annual greenhouse gas (GHG) emissions worldwide. Although forest carbon pool modeling rarely suggests a ‘carbon neutral’ flux profile, the life cycle assessment community and associated product carbon footprint protocols have struggled to account for the GHG emissions associated with forestry, specifically, and land use generally. Principally, this is due to underdeveloped linkages between life cycle inventory (LCI) modeling for wood and forest carbon modeling for a full range of forest types and harvest practices, as well as a lack of transparency in globalized forest supply chains. In this paper, through a comparative study of U.S. and Chinese coated freesheet paper, we develop the initial foundations for a methodology that rescales IPCC methods from the national to the product level, with reference to the approaches in three international product carbon footprint protocols. Due to differences in geographic origin of the wood fiber, the results for two scenarios are highly divergent. This suggests that both wood LCI models and the protocols need further development to capture the range of spatial and temporal dimensions for supply chains (and the associated land use change and modification) for specific product systems. The paper concludes by outlining opportunities to measure and reduce uncertainty in accounting for net emissions of biogenic carbon from forestland, where timber is harvested for consumer products. - Highlights: ► Typical life cycle assessment practice for consumer products often excludes significant land use change emissions when estimating carbon footprints. ► The article provides a methodology to rescale IPCC guidelines for product-level carbon footprints. ► Life cycle inventories and product carbon footprint protocols need more comprehensive land use-related accounting. ► Interdisciplinary collaboration linking the LCA and

Photochemically induced carbon dioxide production as a mechanism for carbon loss from plant litter in arid ecosystems

Science.gov (United States)

Brandt, L. A.; Bohnet, C.; King, J. Y.

2009-06-01

We investigated the potential for abiotic mineralization to carbon dioxide (CO2) via photodegradation to account for carbon (C) loss from plant litter under conditions typical of arid ecosystems. We exposed five species of grass and oak litter collected from arid and mesic sites to a factorial design of ultraviolet (UV) radiation (UV pass, UV block), and sterilization under dry conditions in the laboratory. UV pass treatments produced 10 times the amount of CO2 produced in UV block treatments. CO2 production rates were unaffected by litter chemistry or sterilization. We also exposed litter to natural solar radiation outdoors on clear, sunny days close to the summer solstice at midlatitudes and found that UV radiation (280-400 nm) accounted for 55% of photochemically induced CO2 production, while shortwave visible radiation (400-500 nm) accounted for 45% of CO2 production. Rates of photochemically induced CO2 production on a per-unit-mass basis decreased with litter density, indicating that rates depend on litter surface area. We found no evidence for leaching, methane production, or facilitation of microbial decomposition as alternative mechanisms for significant photochemically induced C loss from litter. We conclude that abiotic mineralization to CO2 is the primary mechanism by which C is lost from litter during photodegradation. We estimate that CO2 production via photodegradation could be between 1 and 4 g C m-2 a-1 in arid ecosystems in the southwestern United States. Taken together with low levels of litter production in arid systems, photochemical mineralization to CO2 could account for a significant proportion of annual carbon loss from litter in arid ecosystems.

Mineral resource of the month: vermiculite

Science.gov (United States)

Tanner, Arnold O.

2014-01-01

Vermiculite comprises a group of hydrated, laminar magnesium-aluminum-iron silicate minerals resembling mica. They are secondary minerals, typically altered biotite, iron-rich phlogopite or other micas or clay-like minerals that are themselves sometimes alteration products of amphibole, chlorite, olivine and pyroxene. Vermiculite deposits are associated with volcanic ultramafic rocks rich in magnesium silicate minerals, and flakes of the mineral range in color from black to shades of brown and yellow. The crystal structure of vermiculite contains water molecules, a property that is critical to its processing for common uses.

Mineral and surface issues in oil and gas operations

International Nuclear Information System (INIS)

Vasseur, P.F.

1998-01-01

The Farmers' Advocate Office was created in 1972 to help put Alberta mineral owners on an equal footing with the energy sector. Most mineral owners are at a disadvantage when dealing with the disposition of their minerals because they have little or no knowledge of what they own or what their surface rights are. This paper addresses key features of mineral leasing arrangements in Alberta and explains their potential impact. It also brings to the mineral owner's attention some specific problems and concerns including mineral rights, the lease agreement, signing considerations, length of leases, delayed production payment, drilling rental, royalties, and gas cost allowance. Issues regarding oil and gas production including shut-in wells, off-set clauses , drilling depth, taxes and prepayment for minerals are also discussed from the perspective of a mineral owner

Reuse of ultrafine mineral wool production waste in the manufacture of refractory concrete.

Science.gov (United States)

Stonys, R; Kuznetsov, D; Krasnikovs, A; Škamat, J; Baltakys, K; Antonovič, V; Černašėjus, O

2016-07-01

The paper deals with the mineral wool production waste (cupola dust - CD), presents CD characterization and aims to reuse CD in production of refractory concrete with calcium aluminate cement. The study of CD covers its chemical, phase and thermal analyses along with the morphological study and determination of particles size distribution. Zeta-potential, electrical conductivity and pH values of CD suspension are presented in the paper as well. Commercial microsilica additive in refractory concrete has been replaced with cupola dust. Compositions of refractory concrete have been prepared by incorporating 1%, 2% and 3% of CD. The bulk density, ultrasonic wave velocity, cold crushing strength and thermal shock resistance of the created refractory concrete have been determined. Based on experimental results, it has been found that cupola dust may be used for the production of refractory concrete. The environmental impact related to the CD reuse in refractory concrete production has been evaluated as well. Copyright © 2016 Elsevier Ltd. All rights reserved.

Productivity and accumulation of nutrients in plants of jambu, under mineral and organic fertilizationProdutividade e acúmulo de nutrientes em plantas de jambu, sob adubação orgânica e mineral

Directory of Open Access Journals (Sweden)

Luciana da Silva Borges

2013-03-01

Full Text Available The organic production is a system that allows achieving good levels of productivity, while avoiding the risks of chemical contamination of farmers, consumers and the environment. Because jambu plant is widely used as alternative medicine and cosmetics industries, has been increasing interest in its cultivation. The aim of this study was to analyze the biomass, accumulation of nutrient, productivity and determine the pesticide residue in plant jambu when grown under organic and mineral fertilization. The experiment was conducted at the Experimental Farm São Manuel, FCA / UNESP. The experiment was conducted at São Manuel Experimental Farm UNESP. The statistical was arranged in the randomized block design, in a 2 x 6 factorial scheme, two sources of fertilizers (organic and mineral and six doses of nitrogen, with four replications. The characteristics evaluated were plant height, fresh and dry weight, nutrients of accumulation in shoots and productivity. Mineral fertilizer gave higher biomass, productivity and accumulation of N and K in relation to organic fertilizer used. It is recommended the dose of 90g m-2 of urea as appropriate to obtain these results. However the organic fertilization favored the accumulation of phosphorus in plants jambu in relation the mineral fertilizer, and the dose of 10 kg m-2 of cattle manure recommended to achieve this result in plants jambu. We did not detect the presence of phosphorous and carbamate on leaves of jambu under organic and mineral fertilization. However, we observed the presence of chlorine in the leaves used for the two fertilizations.A produção orgânica é um sistema que permite alcançar bons níveis de produtividade, evitando ao mesmo tempo os riscos de contaminação química do agricultor, dos consumidores e do meio ambiente. Pelo fato da planta de jambu ser bastante utilizada como medicamento alternativo e por indústrias de cosméticos, vem aumentando o interesse pelo seu cultivo. Assim, o

A review of radiological hazards associated with tin by-product mineral processing industry in the SEATRAD centre member countries

International Nuclear Information System (INIS)

Udompornwirat, S.

1993-01-01

Radiological hazards associated with the tin by-product mineral processing industry has recently become an issue of concern in the SEATRAD Centre member countries namely, Indonesia, Malaysia and Thailand. The SEATRAD Centre, with the assistance of a United Nations Development Program consultant, carried out an investigation on radioactivity problems at twelve tin by-product mineral processing plants in Malaysia and Thailand. The investigation included a survey of external gamma radiation levels and dust sampling for internal dose estimation as well as characterising the potential sources of radiation exposure in the plants. This paper reviews the nature of the tin by-product mineral processing industry and the general levels of associated radiological hazards. In addition, data provided by the government organisations in the member countries are reviewed. Typical annual effective doses experienced by the industry's workers are estimated on the basis of existing information, and possible measures to reduce exposure are discussed. It is concluded that the estimated median effective dose experienced by the workers is about 18 to 19 mSv per annum. Maximum exposures may exceed 200 mSv per annum. The important exposure pathways are external gamma radiation and internal radiation arising through intake of radioactive dust. 5 refs., 2 tabs., 4 figs

32 CFR 644.5 - Mineral Acquisition Practices.

Science.gov (United States)

2010-07-01

... documents, real estate design memoranda, and master plans will fully discuss and consider the extent of... interests, the variety of minerals and the different methods of mineral exploration, recovery and production... subordination agreement and any plan incorporated by reference into such agreement. (d) Off-project mineral...

Biogas and mineral fertiliser production from plant residues of phytoremediation

Energy Technology Data Exchange (ETDEWEB)

Chu, Thi Thu Ha

2011-07-01

for the subsequent utilization of digestates as mineral fertilisers that supply the essential nutrients for crops like wheat, barley and oat. Another used method for attempt to produce mineral fertiliser from plant residues is thermal treatment. The process of burning at 1050 C reduced majority load of biomass. The contents of bottom ash from 5-29 % of different parts of plant residues were measured. Nutrients in bottom ash were rich due to the high proportions of nutritional elements such as potassium, magnesium, phosphorus, sulphur were transferred from the input plant materials into bottom ash. However, the concentrations of heavy metals, in particular cadmium and zinc, in ash were also high that exceeded the allowed limitation values and the possibility of fertiliser production was hard to perform by combustion. (orig.)

Temporary oil production, current account deterioration and the role of monetary and fiscal policy

International Nuclear Information System (INIS)

Harvie, C.

1992-01-01

This paper extends earlier work on the macroeconomic adjustment processes arising for an economy experiencing a temporary period of oil production. Emphasis is placed on developments in the current account, as reflected in foreign asset stock movements, after oil production ceases, as well as on the role that monetary, fiscal or fiscal/monetary policy can play in influencing current-account developments during this same period. The results presented suggest that, to improve the performance of the current account, irrespective of the wage adjustment mechanism operative, after oil production ceases, the major thrust of macroeconomic policy should operate through fiscal rather than monetary policy. However developments in non-oil output would be influenced by the wage adjustment mechanism. With wage indexation, a tight fiscal policy after oil production ceases leads to a higher level of non-oil output than in the no policy response case, or one where monetary policy alone is used. With no wage indexation, the use of monetary and/or fiscal policy leads to lower levels of non-oil output. The use of fiscal policy also has the added benefit of contributing to a lower consumer price level, again irrespective of the operative wage adjustment mechanism. If the emphasis of policy operates through monetary policy, irrespective of the wage adjustment mechanism, the current-account problem will be exacerbated since foreign assets stocks will be lower. In addition, non-oil output and consumer prices will be lower. (Author)

A Lightweight Monitoring and Accounting System for LHCb DC'04 Production

CERN Document Server

Garonne, V; Saborido Silva, J J; Sánchez García, M; Vizcaya Carrillo, R

2004-01-01

The LHCb Data Challenge 04 includes the simulation of over 200 M simulated events using distributed computing resources on N sites and extending along 3 months. To achieve this goal a dedicated Production grid (DIRAC) has been deployed. We will present the Job Monitoring and Accounting services developed to follow the status of the production along its way and to evaluate the results at the end of the Data Challenge. The end user connects with a web browser to WEB-SERVER applications showing dynamic reports for a whole set of possible queries. These applications in turn interrogate the Job Monitoring Service of the DIRAC Workload Management system and Accounting Database service by means of dedicated XML-RPC interfaces, querying for the information requested by the user. The reports provide an uniform view of the usage of the computing resources available. All the system components are implemented as a set of cooperating python classes following the design choice of LHCb. The different services are distribute...

PRODUCTIVITY PERFORMANCE OF ESTONIA IN A GROWTH ACCOUNTING APPROACH

Directory of Open Access Journals (Sweden)

Vivien MOLNAR

2016-12-01

Full Text Available This paper aims to contribute to a better understanding of the economic growth tendencies in Estonia and other formal post-socialist countries and the interaction between productivity growth and their determinants after the transition decades. So this paper is structured as follows. Firstly we will introduce an alternative growth accounting method to determine the components of productivity growth based on this concept. In Section we will also provide our empirical results in Estonia, Latvia, Lithuania and Hungary compared to the EU-15 countries between 1990 and 2011 how TFP (Total Factor Productivity, Physical and Labour Capital Accumulation can contribute to (increase or decrease economic performance of each country. Finally, we can conclude that the relationship between labour and output growth per capita has obviously and temporarily changed after the mid-1990s, which could be determined by the increasing role of such socio-economic factors as technological changes, capital accumulation and demographical fluctuations etc.

Registry of Mineral and Petroleum Titles

Energy Technology Data Exchange (ETDEWEB)

Maclellan, I. M.; Kaizer, J. L.; McCulloch, P. D.; Ratcliffe, R.; Wenning, A. S. [Nova Scotia Dept. of Natural Resources, Halifax, NS (Canada)

2000-07-01

Activities of the Nova Scotia Registry of Mineral and Petroleum Titles are described, including statistical information about staking and mining activity in the province during 1999. In terms of activities, the Registry receives applications and issues licenses and leases for mineral and petroleum rights, receives statements of exploration expenditures and assessment reports that pertain to renewal of licenses and leases, maintains maps showing the disposition of lands under license or lease, and maintains a system of prospector registration. In addition, the Registry processes applications for underground gas storage rights and treasure trove rights and maintains a database of information concerning production and employment in Nova Scotia mines and quarries. At the end 1999 there were 230,660 hectares under exploration licence. Exploration expenditures, including engineering, economic and feasibility studies during 1999 totalled $4.2 million, mostly by junior mining companies searching for industrial mineral commodities. Mining activity during 1999 generated revenues of $340 million. Coal production dropped by 25 per cent, due mainly to the closure of the Phalen Mine. Gypsum production was up to 7.9 million tonnes; shipments of cement, barite and clay products also increased during 1999; salt production remained unchanged from 1998 with 842,000 tonnes. Production of construction aggregates totalled 10.6 million tonnes, down slightly from the year before. Mineral industry employment was roughly 2,500 persons, down by 24 per cent from 1998 levels, due primarily to the closure of the Phalen Mine.

30 CFR 204.207 - Who will approve, deny, or modify my request for accounting and auditing relief?

Science.gov (United States)

2010-07-01

... for accounting and auditing relief? 204.207 Section 204.207 Mineral Resources MINERALS MANAGEMENT... Accounting and Auditing Relief § 204.207 Who will approve, deny, or modify my request for accounting and auditing relief? (a) If there is not a State concerned for your marginal property, only MMS will decide...

Characterization of clay minerals

International Nuclear Information System (INIS)

Diaz N, C.; Olguin, M.T.; Solache R, M.; Alarcon H, T.; Aguilar E, A.

2002-01-01

The natural clays are the more abundant minerals on the crust. They are used for making diverse industrial products. Due to the adsorption and ion exchange properties of these, a great interest for developing research directed toward the use of natural clays for the waste water treatment has been aroused. As part of such researches it is very important to carry out previously the characterization of the interest materials. In this work the results of the mineral and elemental chemical composition are presented as well as the morphological characteristics of clay minerals from different regions of the Mexican Republic. (Author)

On Mineral Retrosynthesis of a Complex Biogenic Scaffold

Directory of Open Access Journals (Sweden)

Ashit Rao

2017-03-01

Full Text Available Synergistic relations between organic molecules and mineral precursors regulate biogenic mineralization. Given the remarkable material properties of the egg shell as a biogenic ceramic, it serves as an important model to elucidate biomineral growth. With established roles of complex anionic biopolymers and a heterogeneous organic scaffold in egg shell mineralization, the present study explores the regulation over mineralization attained by applying synthetic polymeric counterparts (polyethylene glycol, poly(acrylic acid, poly(aspartic acid and poly(4-styrenesulfonic acid-co-maleic acid as additives during remineralization of decalcified eggshell membranes. By applying Mg2+ ions as a co-additive species, mineral retrosynthesis is achieved in a manner that modulates the polymorph and structure of mineral products. Notable features of the mineralization process include distinct local wettability of the biogenic organic scaffold by mineral precursors and mineralization-induced membrane actuation. Overall, the form, structure and polymorph of the mineralization products are synergistically affected by the additive and the content of Mg2+ ions. We also revisit the physicochemical nature of the biomineral scaffold and demonstrate the distinct spatial distribution of anionic biomolecules associated with the scaffold-mineral interface, as well as highlight the hydrogel-like properties of mammillae-associated macromolecules.

One of a kind : from production accounting to trading and budgeting, Entero unifies data and business processes

Energy Technology Data Exchange (ETDEWEB)

Cope, G.

2009-06-15

Entero Corporation, a Calgary-based software developer, launched a software program in 2008 to keep track of petroleum when it comes out of the ground. It allows petroleum producers to keep track of who owns what, how much they own, what it's worth and where it's going. Founded in 1994, Entero's first energy industry software package was called EnteroVision, consisting of evTM and evFM. The evTM component focused on trading and marketing, and operations and logistics for use in inventory, risk management, terminal operations and reporting. The evFM component focused on financial management and accounting, allowing operators to view facility balance by owner, product or source. In 2003, Entero merged with software company MOSAIC Integration. The EnteroONE platform brings key Entero systems onto a shared platform that includes addition of production accounting and plant allocations. Once energy is produced, EnteroONE quickly tracks it from the wellhead through the gathering systems, doing production allocations, production and revenue accounting, managing trade deals, logistics and risk management. It also does financial accounting, such as invoicing for shipments made by any transportation mode, and a full general ledger. It eliminates multiple spreadsheets. Entero's 120 clients include exploration and production companies, trading and marketing companies, and midstream operators involved with product movement and processing. Entero is now focused on improving the functionality of its products. New workspace enhancements and reporting customization in EnteroONE financial management are expected to make troubleshooting, audit reporting more efficient. A new integrated field data capture system in EnteroONE production accounting will link field information to production accounting. A new order, scheduling and nominations workspace for EnteroONE trading and marketing will put decision-making information, including profitability, into one view

One of a kind : from production accounting to trading and budgeting, Entero unifies data and business processes

International Nuclear Information System (INIS)

Cope, G.

2009-01-01

Entero Corporation, a Calgary-based software developer, launched a software program in 2008 to keep track of petroleum when it comes out of the ground. It allows petroleum producers to keep track of who owns what, how much they own, what it's worth and where it's going. Founded in 1994, Entero's first energy industry software package was called EnteroVision, consisting of evTM and evFM. The evTM component focused on trading and marketing, and operations and logistics for use in inventory, risk management, terminal operations and reporting. The evFM component focused on financial management and accounting, allowing operators to view facility balance by owner, product or source. In 2003, Entero merged with software company MOSAIC Integration. The EnteroONE platform brings key Entero systems onto a shared platform that includes addition of production accounting and plant allocations. Once energy is produced, EnteroONE quickly tracks it from the wellhead through the gathering systems, doing production allocations, production and revenue accounting, managing trade deals, logistics and risk management. It also does financial accounting, such as invoicing for shipments made by any transportation mode, and a full general ledger. It eliminates multiple spreadsheets. Entero's 120 clients include exploration and production companies, trading and marketing companies, and midstream operators involved with product movement and processing. Entero is now focused on improving the functionality of its products. New workspace enhancements and reporting customization in EnteroONE financial management are expected to make troubleshooting, audit reporting more efficient. A new integrated field data capture system in EnteroONE production accounting will link field information to production accounting. A new order, scheduling and nominations workspace for EnteroONE trading and marketing will put decision-making information, including profitability, into one view. Within the next 5 years

Management Accounting in the Manufacturing Sector: Managing Costs at the Design and Production Stages

NARCIS (Netherlands)

Davila, Tony; Wouters, Marc; Chapman, Christopher S.; Hopwood, Anthony G.; Shields, Michael D.

2006-01-01

This chapter analyzes the empirical research literature on management accounting in the manufacturing sector including the development as well and manufacturing phases of the product lifecycle. As managing product development has gained terrain in companies over the last 15 years, management

Compatibility of accounting information systems (AISs with activities in production cycle

Directory of Open Access Journals (Sweden)

Farnaz Vali Moghaddam Zanjani

2013-01-01

Full Text Available The intricacies of economic activities and growing increase in competition have made commercial units with the duty of production and financial data processing, orienting themselves with production cycle. This is considered as the heart of organization such that they could be more effective in decision-making. The method adopted in this research is descriptive – survey and it attempts to attain the objectives the researchers based on four independent variables including Production design, Programming, production operations and cost accounting. To test the hypotheses, the study adopts one sample T test method and to investigate uniformity of effects of each variable, Kruscal-Wallis test is employed. The results obtained from the tests indicate that AISs are not compatible with production cycle, where, in turn, has led to rejection of modern costing systems such as activity based costing (ABC.

21 CFR 184.1979b - Reduced minerals whey.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Reduced minerals whey. 184.1979b Section 184.1979b... Listing of Specific Substances Affirmed as GRAS § 184.1979b Reduced minerals whey. (a) Reduced minerals whey is the substance obtained by the removal of a portion of the minerals from whey. The dry product...

Marketing mix of chosen Slovak mineral water

Directory of Open Access Journals (Sweden)

Juhanová Silvia

2001-09-01

Full Text Available Considering its small area, Slovakia abounds in many sources of mineral waters and a considerable amount of them can be used for the commercial utilization. STN 86 8000 divides mineral waters in the natural mineral waters, natural mineral table waters and the natural mineral healing waters. Natural mineral water is, after the present norm, in effect water, which rises from natural trapped sources. This type of water contains more than 1 gram of dissolved substances or 1 gram of dissolved CO 2 in 1 litter. Natural mineral table water is water that, with its chemical composition as well as its physical and sensorial attributes is suitable as a refresher. It contains at least 1 gram of melted CO2 and up to 6 grams of dissolved illiquid substances in 1 litter. The mentioned substances are not characterised by any marked pharmacological effect. Natural mineral healing water is water, which with an eye to its chemical composition and physical properties, have a scientifically demonstrable effects to the human health and it is generally used for healing purposes. In the present contribution, an attention is orientated to the occurrence of listed types of waters in Slovakia, in connection with geological conditions of their circulation and accumulation and especially with possibilities of their use on the Slovak buyer’s market.The marketing mix is a complex of information, which can be regulated. Firms accumulate this information to satisfy a customer. Marketing mix of mineral waters includes information about four variables: product (characteristics of product, quality, packing, design..., prices, advertisement, distribution (the way how to get product to customer. Data listed in the contribution come from the sectional market research, which was performed between December 1st and December 22nd 2000 in twenty groceries in

One-stop shopping in Africa's minerals supermarket

International Nuclear Information System (INIS)

Spira, J.

1980-01-01

Johannesburg in South Africa is one of the minerals capitals of the world, providing a one-stop shopping supermarket for the most sought-after strategic minerals. Total annual mineral sales grew from R1563 million in 1970 to R6876 million in 1978. For 1979 the figure exceeded R9700 million. Production, trade and marketing of gold, coal, platinum, uranium, diamonds, iron ore, copper, antimony, mineral sands, asbestos and vanadium are shortly discussed

Extractants to assess zinc phytoavailability in mineral fertilizer and industrial by-products

Directory of Open Access Journals (Sweden)

Camila Prado Cenciani de Souza

2013-08-01

Full Text Available Efficient analytical methods for the quantification of plant-available Zn contained in mineral fertilizers and industrial by-products are fundamental for the control and marketing of these inputs. In this sense, there are some doubts on the part of the scientific community as well as of the fertilizer production sector, whether the extractor requested by the government (Normative Instruction No. 28, called 2nd extractor, which is citric acid 2 % (2 % CA (Brasil, 2007b, is effective in predicting the plant availability of Zn via mineral fertilizers and about the agronomic significance of the required minimal solubility of 60 % compared to the total content (HCl (Brasil, 2007a. The purpose of this study was to evaluate the alternative extractors DTPA, EDTA, neutral ammonium citrate (NAC, buffer solution pH 6.0, 10 % HCl, 10 % sulfuric acid, 1 % acetic acid, water, and hot water to quantify the contents of Zn available for maize and compare them with indices of agronomic efficiency of fertilizers and industrial by-products when applied to dystrophic Clayey Red Latosol and Dystrophic Alic Red Yellow Latosol with medium texture. The rate of Zn applied to the soil was 5 mg kg-1, using the sources zinc sulfate, commercial granular zinc, ash and galvanic sludge, ash and two brass slags. Most Zn was extracted from the sources by DTPA, 10 % HCl, NAC, 1% acetic acid, and 10 % sulfuric acid. Recovery by the extractors 2 % CA, EDTA, water, and hot water was low. The agronomic efficiency index was found to be high when using galvanic sludge (238 % and commercial granular zinc (142 % and lower with brass slag I and II (67 and 27 %, respectively. The sources galvanizing ash and brass ash showed solubility lower than 60 % in 2 % CA, despite agronomic efficiency indices of 78 and 125 %, respectively. The low agronomic efficiency index of industrial by-products such as brass slag I and galvanizing ash can be compensated by higher doses, provided there is no

Productive performance, eggshell quality, and eggshell ultrastructure of laying hens fed diets supplemented with organic trace minerals.

Science.gov (United States)

Stefanello, C; Santos, T C; Murakami, A E; Martins, E N; Carneiro, T C

2014-01-01

This study was carried out with the purpose of evaluating the effect of supplementing hens' diets with trace minerals from inorganic or organic sources on the productive performance, eggshell quality, and eggshell ultrastructure of laying hens. Three hundred sixty Hy-Line W36 laying hens between 47 to 62 wk of age were used and distributed in a completely randomized experimental design with 9 treatments, 5 replicates, and 8 birds for each experimental unit. The treatments consisted of a control diet without supplementation of the trace minerals Mn, Zn, and Cu; 4 supplementation levels of these trace minerals from an inorganic source; and the same levels of supplementation from an organic source (proteinates). The supplementation levels in milligrams per kilogram for Mn, Zn, and Cu, were, respectively, 35-30-05, 65-60-10, 95-90-15, and 125-120-20. There was no effect of supplementation of trace minerals on the rate of posture, feed intake, feed conversion, specific weight, and Haugh unit of eggs. However, there was a quadratic effect (P < 0.05) of the levels of trace mineral supplementation on average egg weight and egg mass; the results did not differ regarding the source used. The increase in the levels of supplementation of Mn, Zn, and Cu provided a linear increase (P < 0.05) in the breaking strength and the percentage of eggshell. There was a linear decrease (P < 0.05) in the egg loss and the number of mammillary buttons in the shell. The best results were obtained using diets supplemented with trace minerals from an organic source because these diets provided lower egg loss, higher thickness, and increased strength of the shell. Structurally, organic Mn, Zn, and Cu provided higher thickness of the palisade layer and lower mammillary density. The trace mineral supplementation improved the structural characteristics and the quality of the eggshells.

Enterprise technology in support for accounting information systems. an innovation and productivity approach

Directory of Open Access Journals (Sweden)

Jose Melchor Medina-Quintero

2015-09-01

Full Text Available Technology and the accounting information systems are implemented in an organization with the aim of improving their efficiency. Companies spend large amounts of money on these tools every year in order to improve their organizational performance. The aim of this research is to determine the influence of SMEs’ technological alignment, information management and technological infrastructure on the performance of an institution (innovation and productivity in which accounting information systems are used. An empirical study is conducted in enterprises belonging to the service, commercial and industrial sectors in Ciudad Victoria, México, with the help of the SmartPLS statistical tool. The results mainly show that technology has helped raise productivity (improvement in administrative activities, in decision-making and in the use of generated information.

Numerical modeling of the impact of temperature on the behavior of minerals in the Soultz-sous-Forêts enhanced geothermal system

Science.gov (United States)

Van Ngo, Viet; Lucas, Yann; Clément, Alain; Fritz, Bertrand

2015-04-01

Operation of the enhanced geothermal system (EGS) requires to re-inject fluid, after heat exchange at the surface to the energy production, into the geothermal reservoir. This cold re-injected fluid can cause a strong disequilibrium with the fluid and granitic rock within the geothermal reservoir and then implies the possible dissolution/precipitation of minerals. The hydrothermal alterations include the transformation of plagioclase, biotite and K-feldspar and the precipitation of various secondary minerals. The major sealing phases observed in the main fracture zones are quartz, calcite, and clay minerals. These mineralogical transformations may modify the porosity, permeability and fluid pathways of the geothermal reservoir. In the Soultz-sous-Forêts EGS (Alsace, France), the hydraulic connection between the injection well and the production well is quite poor. Therefore, understanding the impact of changes in temperature, which are caused by the re-injected fluid, on the behavior of minerals (especially for the main newly-formed minerals such as quartz, calcite and clay minerals) is a critical preliminary step for the long-term prediction of their evolution. The approach used in the present work is typically based on a geochemical code, called THERMA, which enables to calculate the changes in equilibrium constants of all primary and secondary minerals and aqueous species as a function of temperature. Our model accounted for a wide range of different mineral groups in order to make sure a large freedom for the numerical calculations. The modeling results showed that when the temperature of geothermal reservoir is cooled down, quartz, calcite, illites, galena and pyrite have tendency towards equilibrium state, which indicates that they are precipitated under the geothermal conditions. In contrast, other minerals including plagioclase, K-feldspar and biotite remained unsaturated. These behaviors of minerals were further illustrated by the Khorzinsky stability

Ecological quality of production: accounting approach on sustainable development

Directory of Open Access Journals (Sweden)

N.P. Syroid

2016-12-01

Full Text Available The specific weight of resource and power consuming technologies that is typical for Ukrainian economy, the absence of effective legal, administrative and economic mechanisms of management of nature and the low level of ecological society consciousness have led to the significant deterioration of environment state in Ukraine, excessive pollution of waters, air, and soil, accumulation of a large number of waste products. Besides, the produce as a result of such enterprises’ production affects consumers’ health badly. This causes the need to develop theory and methodology of production ecological quality accounting. The problem of quality is the most important factor of increasing of life level, economic, social and ecological security in market economy. This, the current research aims to formulate the essence of concept “ecological quality of production” The research determines that ecological quality is characterized by the following main 6 aspects: social, technical, legal, economic, aesthetic and ecological. If one of these six aspects does not work, we cannot speak about ecological quality of a certain commodity. Many various factors influence upon the level of ecological quality of products and services. According to their contents and directions, they can be united into the following main 6 groups: technical, organizational, economic and social, ecological and aesthetic and legal. The article determines the directions of production ecological quality increasing.

Predicting the mineral composition of dust aerosols - Part 1: Representing key processes

Science.gov (United States)

Perlwitz, J. P.; Pérez García-Pando, C.; Miller, R. L.

2015-02-01

Soil dust aerosols created by wind erosion are typically assigned globally uniform physical and chemical properties within Earth system models, despite known regional variations in the mineral content of the parent soil. Mineral composition of the aerosol particles is important to their interaction with climate, including shortwave absorption and radiative forcing, nucleation of cloud droplets and ice crystals, coating by heterogeneous uptake of sulfates and nitrates, and atmospheric processing of iron into bioavailable forms that increase the productivity of marine phytoplankton. Here, aerosol mineral composition is derived by extending a method that provides the composition of a wet-sieved soil. The extension accounts for measurements showing significant differences between the mineral fractions of the wet-sieved soil and the resulting aerosol concentration. For example, some phyllosilicate aerosols are more prevalent at silt sizes, even though they are nearly absent in a soil whose aggregates are dispersed by wet sieving during analysis. We reconstruct the undispersed size distribution of the original soil that is subject to wind erosion. An empirical constraint upon the relative emission of clay and silt is applied that further differentiates the soil and aerosol mineral composition. In addition, a method is proposed for mixing minerals with small impurities composed of iron oxides. These mixtures are important for transporting iron far from the dust source, because pure iron oxides are more dense and vulnerable to gravitational removal than most minerals comprising dust aerosols. A limited comparison to measurements from North Africa shows that the extension brings the model into better agreement, consistent with a more extensive comparison to global observations as well as measurements of elemental composition downwind of the Sahara, as described in companion articles.

CO2 Energy Reactor - Integrated Mineral Carbonation: Perspectives on Lab-Scale Investigation and Products Valorization

OpenAIRE

Rafael M Santos; Pol CM Knops; Keesjan L Rijnsburger; Yi Wai eChiang

2016-01-01

To overcome the challenges of mineral CO2 sequestration, Innovation Concepts B.V. is developing a unique proprietary gravity pressure vessel (GPV) reactor technology and has focussed on generating reaction products of high economic value. The GPV provides intense process conditions through hydrostatic pressurization and heat exchange integration that harvests exothermic reaction energy, thereby reducing energy demand of conventional reactor designs, in addition to offering other benefits. In ...

Non-autoclaved aerated concrete with mineral additives

Science.gov (United States)

Il'ina, L. V.; Rakov, M. A.

2016-01-01

We investigated the effect of joint grinding of Portland cement clinker, silica and carbonate components and mineral additives to specific surface of 280 - 300 m2/kg on the properties (strength, average density and thermal conductivity) of non-autoclaved aerated concrete, and the porosity of the hardened cement paste produced from Portland cement clinker with mineral additives. The joint grinding of the Portland cement clinker with silica and carbonate components and mineral additives reduces the energy consumption of non-autoclaved aerated concrete production. The efficiency of mineral additives (diopside, wollastonite) is due to the closeness the composition, the type of chemical bonds, physical and chemical characteristics (specific enthalpy of formation, specific entropy) to anhydrous clinker minerals and their hydration products. Considering the influence of these additions on hydration of clinker minerals and formation of hardened cement paste structure, dispersed wollastonite and diopside should be used as mineral additives. The hardness and, consequently, the elastic modulus of diopside are higher than that of hardened cement paste. As a result, there is a redistribution of stresses in the hardened cement paste interporous partitions and hardening, both the partitions and aerated concrete on the whole. The mineral additives introduction allowed to obtain the non-autoclaved aerated concrete with average density 580 kg/m3, compressive strength of 3.3 MPa and thermal conductivity of 0.131 W/(m.°C).

Brazilian minerals annual report

International Nuclear Information System (INIS)

1977-01-01

Statistics of Brazilian mineral resources and production in 1977 are presented. Data included refer also to economic aspects, market, taxes, government incentives, manpower, exportation, importation, etc [pt

Cancer epidemiology in respiratory system among uranium miners

International Nuclear Information System (INIS)

Moraes, A.

1976-11-01

A summary of some published papers about cancer in respiratory system among uranium miners is presented. A comparative table relating cancer cases among uranium miners is shown. A table relating cases among miners in Checoslovaquia and cumulative exposure levels due to radon daughter products is also given [pt

Fault rocks and uranium mineralization

International Nuclear Information System (INIS)

Tong Hangshou.

1991-01-01

The types of fault rocks, microstructural characteristics of fault tectonite and their relationship with uranium mineralization in the uranium-productive granite area are discussed. According to the synthetic analysis on nature of stress, extent of crack and microstructural characteristics of fault rocks, they can be classified into five groups and sixteen subgroups. The author especially emphasizes the control of cataclasite group and fault breccia group over uranium mineralization in the uranium-productive granite area. It is considered that more effective study should be made on the macrostructure and microstructure of fault rocks. It is of an important practical significance in uranium exploration

Mineral supplementation for grazing ruminants

International Nuclear Information System (INIS)

McDowell, L.R.; Conrad, J.H.; Ellis, G.L.

1986-01-01

Grazing ruminants to which concentrate feeds cannot be economically fed must rely on self-feeding of mineral supplements. A number of factors affect mineral consumption of free-choice mixtures. Livestock exhibit little nutritional wisdom and will select palatable mixtures in preference to mixtures designed to meet their requirements. Palatability and appetite stimulators are often used to achieve a more uniform herd-wide consumption. It is best to formulate free-choice mixtures on the basis of analyses or other available data. However, when no information on mineral status is known, a free-choice complete mineral supplement is warranted. A 'complete' mineral mixture usually includes salt, a low fluoride P source, Ca, Co, Cu, I, Mn and Zn. Selenium, Mg, K, S, Fe or additional elements can be incorporated into a mineral supplement as new information suggests a need. The detriment to ruminant production caused by providing Ca, Se and Cu in excess can be greater than any benefit derived by providing a mineral supplement. In regions where high forage Mo predominates, three to five times the Cu content in mineral mixtures is needed to counteract Mo toxicity. Supplemental minerals are most critical during the wet season, when cattle are gaining weight rapidly and energy and protein supplies are adequate. Economic return on mineral supplementation is high. (author)

Remote sensing of geologic mineral occurrences for the Colorado mineral belt using LANDSAT data

Science.gov (United States)

Carpenter, R. H. (Principal Investigator); Trexler, D. W.

1976-01-01

The author has identified the following significant results. LANDSAT imagery was examined as a practical and productive tool for mineral exploration along the Colorado Mineral Belt. An attempt was made to identify all large, active and/or abandoned mining districts on the imagery which initially were discovered by surface manifestations. A number of strong photolinements, circular features, and color anomalies were identified. Some of these form a part of the structural and igneous volcanic framework in which mineral deposits occur. No specific mineral deposits such as veins or porphyries were identified. Promising linear and concentric features were field checked at several locations. Some proved to be fault zones and calderas; others were strictly topographic features related to stream or glacial entrenchment. The Silverton Caldera region and the Idaho Springs-Central City district were chosen and studied as case histories to evaluate the application of LANDSAT imagery to mineral exploration. Evidence of specific mineralization related to ore deposits in these two areas were observed only on low level photography.

Anaerobic digestion of paunch in a CSTR for renewable energy production and nutrient mineralization

International Nuclear Information System (INIS)

Nkemka, Valentine Nkongndem; Marchbank, Douglas H.; Hao, Xiying

2015-01-01

Highlights: • Anaerobic digestion and nutrient mineralization of paunch in a CSTR. • Low CH 4 yield and high CH 4 productivity was obtained at an OLR of 2.8 g VS L −1 day −1. • Post-digestion of the digestate resulted in a CH 4 yield of 0.067 L g −1 VS. • Post-digestion is recommended for further digestate stabilization. - Abstract: A laboratory study investigated the anaerobic digestion of paunch in a continuous stirred tank reactor (CSTR) for the recovery of biogas and mineralization of nutrients. At an organic loading rate (OLR) of 2.8 g VS L −1 day −1 with a 30-day hydraulic retention time (HRT), a CH 4 yield of 0.213 L g −1 VS and CH 4 production rate of 0.600 L L −1 day −1 were obtained. Post-anaerobic digestion of the effluent from the CSTR for 30 days at 40 °C recovered 0.067 L g −1 VS as CH 4 , which was 21% of the batch CH 4 potential. Post-digestion of the effluent from the digestate obtained at this OLR is needed to meet the stable effluent criteria. Furthermore, low levels of soluble ions such as K + , Ca 2+ and Mg 2+ were found in the liquid fraction of the digestate and the remainder could have been retained in the solid digestate fraction. This study demonstrates the potential of biogas production from paunch in providing renewable energy. In addition, recovery of plant nutrients in the digestate is important for a sustainable agricultural system

Mineral Dust Instantaneous Radiative Forcing in the Arctic

Science.gov (United States)

Kylling, A.; Groot Zwaaftink, C. D.; Stohl, A.

2018-05-01

Mineral dust sources at high and low latitudes contribute to atmospheric dust loads and dust deposition in the Arctic. With dust load estimates from Groot Zwaaftink et al. (https://doi.org/10.1002/2016JD025482), we quantify the mineral dust instantaneous radiative forcing (IRF) in the Arctic for the year 2012. The annual-mean top of the atmosphere IRF is 0.225 W/m2, with the largest contributions from dust transported from Asia south of 60°N and Africa. High-latitude (>60°N) dust sources contribute about 39% to top of the atmosphere IRF and have a larger impact (1 to 2 orders of magnitude) on IRF per emitted kilogram of dust than low-latitude sources. Mineral dust deposited on snow accounts for nearly all of the bottom of the atmosphere IRF of 0.135 W/m2. More than half of the bottom of the atmosphere IRF is caused by dust from high-latitude sources, indicating substantial regional climate impacts rarely accounted for in current climate models.

Pre-treatment of Used-Cooking Oil as Feed Stocks of Biodiesel Production by Using Activated Carbon and Clay Minerals

Directory of Open Access Journals (Sweden)

Rudy Syah Putra

2014-02-01

Full Text Available Many low-cost feedstock i.e. used-cooking oil (UCO for the production of biodiesel fuel (BDF has contained a large amount of water and high proportion of free fatty acids (FFAs. Therefore, a pre-treatment process to reduce the water content (<0.1 wt.% and FFAs (<2.0 wt.% were necessary in order to avoid an undesirable side reactions, such as saponification, which could lead to serious problem of product separation and low fatty acid methyl ester (FAME yield. . In this study, a pre-treatment process of used cooking oil as a feedstock for the production of BDF by using various adsorbents such as Activated Carbon (AC and various clay minerals, for example Smectite (S, Bentonite (B, Kaolinite (K, and Powdered Earthenware (PE were evaluated. The oil obtained from pre-treatment was compared with oil without pre-treatment process. In this study, we reported a basic difference in material ability to the oil, depending on the adsorption condition with respect to the physico-chemical parameters, e.g. refractive index (R, density (ρ, FFAs, and water content (W. The results showed that the water content and FFAs in the oil has decreased when using AC as an adsorbent compared with clay minerals. However, the refractive index of oil has similar with the oil without pre-treatment process as well; meanwhile, the density of oil has increased after the pre-treatment process by using clay minerals.

The role of gluconate production by Pseudomonas spp. in the mineralization and bioavailability of calcium-phytate to Nicotiana tabacum.

Science.gov (United States)

Giles, Courtney D; Hsu, Pei-Chun Lisa; Richardson, Alan E; Hurst, Mark R H; Hill, Jane E

2015-12-01

Organic phosphorus (P) is abundant in most soils but is largely unavailable to plants. Pseudomonas spp. can improve the availability of P to plants through the production of phytases and organic anions. Gluconate is a major component of Pseudomonas organic anion production and may therefore play an important role in the mineralization of insoluble organic P forms such as calcium-phytate (CaIHP). Organic anion and phytase production was characterized in 2 Pseudomonas spp. soil isolates (CCAR59, Ha200) and an isogenic mutant of strain Ha200, which lacked a functional glucose dehydrogenase (Gcd) gene (strain Ha200 gcd::Tn5B8). Wild-type and mutant strains of Pseudomonas spp. were evaluated for their ability to solubilize and hydrolyze CaIHP and to promote the growth and assimilation of P by tobacco plants. Gluconate, 2-keto-gluconate, pyruvate, ascorbate, acetate, and formate were detected in Pseudomonas spp. supernatants. Wild-type pseudomonads containing a functional gcd could produce gluconate and mineralize CaIHP, whereas the isogenic mutant could not. Inoculation with Pseudomonas improved the bioavailability of CaIHP to tobacco plants, but there was no difference in plant growth response due to Gcd function. Gcd function is required for the mineralization of CaIHP in vitro; however, further studies will be needed to quantify the relative contribution of specific organic anions such as gluconate to plant growth promotion by soil pseudomonads.

Improving mining technology and organization of labor in the light of medical-biological aspects of physical health of miners

Energy Technology Data Exchange (ETDEWEB)

Egorov, P.V.; Nirenburg, K.G.; Davydova, N.N.; Dyatlova, L.A. (Kuzbasskii Politekhnicheskii Institut (USSR))

1991-12-01

Transfer to a contract-bonus system in mines of the Severokuzbassugol' and Leninskugol' associations (USSR) increased coal mining productivity by 42.2-54.4%, but, at the same time, problems concerning miners' health were noted. Presents data on the productivity and labor conditions of contract teams working at coal mining and in development faces. The influence of noise and vibration induced stresses on organisms of underground workers is analyzed. Investigations showed that 3 stages of exhaustion are likely to develop and that the most vulnerable are the cardiovascular system and the respiratory tract. The 3 stages of exhaustion and ability to recover were studied on mining machine operators and drivers of heading machines. Data showed that during the 1985-89 period, 972 miners received disability certificates; the rate of disability was 2.6 miners per 1 Mt of coal; 40.5% of miners over 40 years working on labor-intensive jobs had three or more chronic diseases which could cause permanent disability. In the structure of disability, cardio-vascular system cases accounted for 25%, osseous-muscular system cases for 20% and pulmonary diseases for 13%. Stresses the need for every mine to maintain its own medical center equipped with inhalation therapy, psychological relief, acupuncture and physiotherapy facilities.

The use of by-products from metallurgical and mineral industries as filler in cement-based materials.

Science.gov (United States)

Moosberg, Helena; Lagerblad, Björn; Forssberg, Eric

2003-02-01

This investigation has been made in order to make it possible to increase the use of by-products in cement-based materials. Use of by-products requires a screening procedure that will reliably determine their impact on concrete. A test procedure was developed. The most important properties were considered to be strength development, shrinkage, expansion and workability. The methods used were calorimetry, flow table tests, F-shape measurements, measurements of compressive and flexural strength and shrinkage/expansion measurements. Scanning electron microscopy was used to verify some results. Twelve by-products were collected from Swedish metallurgical and mineral industries and classified according to the test procedure. The investigation showed that the test procedure clearly screened out the materials that can be used in the production of concrete from the unsuitable ones.

Australian mineral industry annual review for 1986

Energy Technology Data Exchange (ETDEWEB)

1988-01-01

This volume of the Australian Mineral Industry Annual Review records the development and performance of the industry during the calendar year 1986. It reports production, consumption, treatment, trade, prices, new developments, exploration, and resources for mineral commodities including fuels, and summarises equivalent developments abroad. Part 1, 'General Review', after briefly surveying the world mineral industry, summarises developments in the Australian mineral industry as a whole. Part 2, 'Commodity Review', covers individual mineral commodities and commodity groups including brown coal, black coal and peat. Part 3, 'Mining Census', tabulates statistics extracted from the Mining Census, together with some mineral processing statistics from the Manufacturing Census. Part 4, tabulates quantity and value data on mineral output provided by the State departments of mines and their equivalents. The commodity review of black coal has been abstracted separately.

Micro structural characteristics of minced meat products from use of protein-mineral additive

Directory of Open Access Journals (Sweden)

M. Golovko

2015-05-01

Full Text Available Introduction. Infringement of balance mineral substances is widely manifested in the meat products which is much wealthier in phosphorus than calcium. List of additives that containing calcium and technology meat products with their using are limited. Purpose of the work is studying and scientific substantiation of influence proteinmineral additive (PMA on the technological microstructural properties of minced meat products. Matherials and methods. Studies water-and fat-holding ability (WHA, FHA of samples carried out by gravimetric and refract metric methods. Histological sections were produced at microtome, followed by coloring with hematoxylin and eosin and by the method of Mallory. Results and discussion. Created a technology of the minced meat products for health improvement using the PMA which is a carrier of Bioorganic calcium. Rational is the addition of PMA in powder form in amount of 7,5 % of the meat systems. Technological parameters of minced meat increase when making additions in particular WHA and FHA approx about 5 and 10 % respectively. Histological studies have shown that PMA promotes the preservation of meat juice and sarcoplasmic proteins in the meat systems during thermal processing. Conclusions. PMA has a positive impact on the properties of water-holding properties of minced meat and output the finished product.

The mineral sector and economic development in Ghana: A computable general equilibrium analysis

Science.gov (United States)

Addy, Samuel N.

A computable general equilibrium model (CGE) model is formulated for conducting mineral policy analysis in the context of national economic development for Ghana. The model, called GHANAMIN, places strong emphasis on production, trade, and investment. It can be used to examine both micro and macro economic impacts of policies associated with mineral investment, taxation, and terms of trade changes, as well as mineral sector performance impacts due to technological change or the discovery of new deposits. Its economywide structure enables the study of broader development policy with a focus on individual or multiple sectors, simultaneously. After going through a period of contraction for about two decades, mining in Ghana has rebounded significantly and is currently the main foreign exchange earner. Gold alone contributed 44.7 percent of 1994 total export earnings. GHANAMIN is used to investigate the economywide impacts of mineral tax policies, world market mineral prices changes, mining investment, and increased mineral exports. It is also used for identifying key sectors for economic development. Various simulations were undertaken with the following results: Recently implemented mineral tax policies are welfare increasing, but have an accompanying decrease in the output of other export sectors. World mineral price rises stimulate an increase in real GDP; however, this increase is less than real GDP decreases associated with price declines. Investment in the non-gold mining sector increases real GDP more than investment in gold mining, because of the former's stronger linkages to the rest of the economy. Increased mineral exports are very beneficial to the overall economy. Foreign direct investment (FDI) in mining increases welfare more so than domestic capital, which is very limited. Mining investment and the increased mineral exports since 1986 have contributed significantly to the country's economic recovery, with gold mining accounting for 95 percent of the

Taxation and our future mineral resources. [Canada

Energy Technology Data Exchange (ETDEWEB)

Brown, R D

1976-05-01

Canada's known reserves of minerals are estimated in general to be adequate to meet domestic requirements and current export demands until the mid-1980's. Beyond that time, an increasing proportion of reserves needed to maintain, let alone increase, present mineral production must come from mineral deposits not yet discovered, delineated or developed. The major question for Canada is whether present tax and regulatory programs will provide sufficient incentives for the industry to spend the large amounts required--perhaps $1.2 billion annually--in the exploration and development of mineral resources. Without such a major capital commitment to the development of new mineral resources, Canada will not be able to maintain the relative importance of its mining sector, or the contribution that the sector has made to our balance of payments, employment, and the opening of new frontiers. However, present levels of exploration and development expenditures are likely to be totally inadequate in maintaining, let alone increasing present production. The article refers to two major new reports that provide new information on Canada's resource industries and their future.

Accounting of allocation of production enterprises’ overhead costs

Directory of Open Access Journals (Sweden)

О.V. Ivaniuta

2016-12-01

Full Text Available Taking into account the complexity of engineering technological cycles, the use of traditional approaches to the allocation of overhead costs at the researching enterprises is inexpedient and inefficient. The authors find out that to solve this problem it is not enough to choose only one base of allocation because the formed prime cost with such an approach will not meet the reality. That is why it is suggested to use a multilevel allocation of overhead costs. The proposed approach involves the allocation of overhead costs at the following levels: fixed and variable, with shops of main and auxiliary production, calculation stations, some orders. Each level involves the selection of individual allocation bases that are grouped on economic, technological and integrated ones.

Lung Cancer of the Uranium Miners

International Nuclear Information System (INIS)

Kiselev, M.F.; Shandala, N.K.; Gneusheva, G.I.; Seregin, V.A.; Kiselev, S.M.; Semenova, M.P.

2012-01-01

Full text: 'The Priargun Production Mining and Chemical Association' (hereinafter referred to as PPMCA) is the only world diversified mining company, which, in addition to underground mining of uranium ore, carries out refining of such ores in hydrometallurgical process to produce natural uranium oxide. The paper deals with the evaluation of the occupational morbidity of the PPMCA's miners depending on their work conditions. In order to evaluate radiological risks of the malignant neoplasm incidence, we used the available medical-dosimetry data being received over the Association life. Our study covers information of 584 miners. The main part of this group includes men (87%), involved in uranium mining (sinkers, timber-men, etc.). Women accounted 13%, being involved in subsidiary works. The highest mean external doses (20 - 40 mSv/year) got those, who worked in the mines over 1980-1983, but the number of this subgroup is small - 18 persons. Generally, mean doses over next years were about 5 mSv/year. However, almost each year, maximum doses above 20 mSv/year can be observed. Internal doses to men were 42.9 mSv on average, while those to women were 23.9 mSv. When generating the medical database, we collected data of 130 mail mines, employed to the PPMCA mines. Among all cases of the malignant neoplasm incidence of miners, the highest contribution is made by the lung cancer (46%); this is well above the national data (23.3 %). The second part is digestive tract cancer (the stomach, the lower lip, and pancreas), contributing 29 % in total, and the stomach cancer contributes 16 %. Depositions of these malignancies do not exceed the national data. The problem of the further work improvement of the miners to eliminate occupational lung disease in the uranium mining operations remains important to the present. Epidemiological and radio-ecological studies will help both regulators and operators to make more objective assessment of each specific situation and to determine

USING THE METHOD OF SITUATIONAL ANALYSIS IN PROJECT MANAGEMENT TAKING INTO ACCOUNT SEASONALITY OF PRODUCTION

Directory of Open Access Journals (Sweden)

Тетяна Олександрівна ПРОКОПЕНКО

2016-02-01

Full Text Available There have been proposed methods of fuzzy situational approach, providing decision-making in project management in enterprises with seasonal nature of production. The model of fuzzy graph situational project management in the investment phase, providing adequate and effective opportunity to describe the project taking into account seasonality and uncertainty in the tasks of planning and decision making. The conclusions about the choice of alternative strategic solutions for companies considering the seasonality of production based on the proposed fuzzy graph situational solutions that allow for the special factors such as the nature of the project and the environment; uncertainty in the design and environment; take account of the conditions of the process; and evaluate the results of actions and make choices alternatives for achieving the strategic objectives of the various activities of the enterprise, taking into account the seasonal factor.

Development of the German mineral oil market in 1995. Pt. 2

International Nuclear Information System (INIS)

Mohnfeld, J.; Heinze, W.

1996-01-01

Following a brief glance at the boundary conditions for the German market (world oil market, inland energy consumption), the development of inland sales is described. One after one, the mineral oil products Otto engine fuel, diesel fuel, light fuel oil and heavy fuel oil are considered. Further sections deal with crude oil supply, the supply of mineral oil produce, refinery production, the development in the sales sector, the profit situation of the mineral oil industry, the development of prices (according to products) and expenditure in foreign exchange for mineral oil. The article contains numerous tables and graphs; comparisons with the years previously illustrate development trends. (UA) [de

Mineral oil barrier sequential polymer treatment for recycled paper products in food packaging

Science.gov (United States)

Paul, Uttam C.; Fragouli, Despina; Bayer, Ilker S.; Mele, Elisa; Conchione, Chiara; Cingolani, Roberto; Moret, Sabrina; Athanassiou, Athanassia

2017-01-01

Recycled cellulosic paperboards may include mineral oils after the recycle process, which together with their poor water resistance limit their use as food packaging materials. In this work, we demonstrate that a proper functionalization of the recycled paper with two successive polymer treatments, imposes a mineral oil migration barrier and simultaneously renders it waterproof and grease resistant, making it an ideal material for food contact. The first poly (methyl methacrylate) treatment penetrates the paper network and creates a protective layer around every fiber, permitting thus the transformation of the paperboard to a hydrophobic material throughout its thickness, reducing at the same time the mineral oil migration. Subsequently, the second layer with a cyclic olefin copolymer fills the open pores of the surface, and reduces the mineral oil hydrocarbons migration at levels below those proposed by the BMEL. Online liquid chromatography-gas chromatography coupled with flame ionization detection quantitatively demonstrate that this dual functional treatment prevents the migration of both saturated (mineral oil saturated hydrocarbons) and aromatic hydrocarbon (mineral oil aromatic hydrocarbons) mineral oils from the recycled paperboard to a dry food simulant.

Imaging and Analytical Approaches for Characterization of Soil Mineral Weathering

Energy Technology Data Exchange (ETDEWEB)

Dohnalkova, Alice; Arey, Bruce; Varga, Tamas; Miller, Micah; Kovarik, Libor

2017-07-01

Soil minerals weathering is the primary natural source of nutrients necessary to sustain productivity in terrestrial ecosystems. Soil microbial communities increase soil mineral weathering and mineral-derived nutrient availability through physical and chemical processes. Rhizosphere, the zone immediately surrounding plant roots, is a biogeochemical hotspot with microbial activity, soil organic matter production, mineral weathering, and secondary phase formation all happening in a small temporally ephemeral zone of steep geochemical gradients. The detailed exploration of the micro-scale rhizosphere is essential to our better understanding of large-scale processes in soils, such as nutrient cycling, transport and fate of soil components, microbial-mineral interactions, soil erosion, soil organic matter turnover and its molecular-level characterization, and predictive modeling.

Canadian minerals yearbook : 2004 review and outlook

International Nuclear Information System (INIS)

2004-01-01

The main focus of the CMY publication is the non-fuel mineral industry, together with uranium, although all mineral fuels are normally included when the total value of Canada's mineral production is reported. The Yearbook includes chapters devoted to each major mineral commodity produced in Canada: aluminum, coal, copper, diamonds, gold, iron ore, magnesium, nickel, potash, salt, silica, and uranium. The subject matter spans all stages of mineral industry activity from geoscience and exploration, through mining and processing, to markets and use. Although domestic issues receive the greatest attention in each chapter, international developments may also be reviewed because of the global nature of the mineral industry and the significant impact that such developments could have on the Canadian industry

Critical mineral resources of the United States—An introduction

Science.gov (United States)

Schulz, Klaus J.; DeYoung, John H.; Seal, Robert R.; Bradley, Dwight C.; Schulz, Klaus J.; DeYoung,, John H.; Seal, Robert R.; Bradley, Dwight C.

2017-12-19

Many changes have taken place in the mineral resource sector since the publication by the U.S. Geological Survey of Professional Paper 820, “United States Mineral Resources,” which is a review of the long-term United States resource position for 65 mineral commodities or commodity groups. For example, since 1973, the United States has continued to become increasingly dependent on imports to meet its demands for an increasing number of mineral commodities. The global demand for mineral commodities is at an alltime high and is expected to continue to increase, and the development of new technologies and products has led to the use of a greater number of mineral commodities in increasing quantities to the point that, today, essentially all naturally occurring elements have several significant industrial uses. Although most mineral commodities are present in sufficient amounts in the earth to provide adequate supplies for many years to come, their availability can be affected by such factors as social constraints, politics, laws, environmental regulations, land-use restrictions, economics, and infrastructure.This volume presents updated reviews of 23 mineral commodities and commodity groups viewed as critical to a broad range of existing and emerging technologies, renewable energy, and national security. The commodities or commodity groups included are antimony, barite, beryllium, cobalt, fluorine, gallium, germanium, graphite, hafnium, indium, lithium, manganese, niobium, platinum-group elements, rare-earth elements, rhenium, selenium, tantalum, tellurium, tin, titanium, vanadium, and zirconium. All these commodities have been listed as critical and (or) strategic in one or more of the recent studies based on assessed likelihood of supply interruption and the possible cost of such a disruption to the assessor. For some of the minerals, current production is limited to only one or a few countries. For many, the United States currently has no mine production or any

Mineral commodity profiles: nitrogen

Science.gov (United States)

Kramer, Deborah A.

2004-01-01

Overview -- Nitrogen (N) is an essential element of life and a part of all animal and plant proteins. As a part of the DNA and RNA molecules, nitrogen is an essential constituent of each individual's genetic blueprint. As an essential element in the chlorophyll molecule, nitrogen is vital to a plant's ability to photosynthesize. Some crop plants, such as alfalfa, peas, peanuts, and soybeans, can convert atmospheric nitrogen into a usable form by a process referred to as 'fixation.' Most of the nitrogen that is available for crop production, however, comes from decomposing animal and plant waste or from commercially produced fertilizers. Commercial fertilizers contain nitrogen in the form of ammonium and/or nitrate or in a form that is quickly converted to the ammonium or nitrate form once the fertilizer is applied to the soil. Ammonia is generally the source of nitrogen in fertilizers. Anhydrous ammonia is commercially produced by reacting nitrogen with hydrogen under high temperatures and pressures. The source of nitrogen is the atmosphere, which is almost 80 percent nitrogen. Hydrogen is derived from a variety of raw materials, which include water, and crude oil, coal, and natural gas hydrocarbons. Nitrogen-based fertilizers are produced from ammonia feedstocks through a variety of chemical processes. Small quantities of nitrates are produced from mineral resources principally in Chile. In 2002, anhydrous ammonia and other nitrogen materials were produced in more than 70 countries. Global ammonia production was 108 million metric tons (Mt) of contained nitrogen. With 28 percent of this total, China was the largest producer of ammonia. Asia contributed 46 percent of total world ammonia production, and countries of the former U.S.S.R. represented 13 percent. North America also produced 13 percent of the total; Western Europe, 9 percent; the Middle East, 7 percent; Central America and South America, 5 percent; Eastern Europe, 3 percent; and Africa and Oceania

A multi-mineral natural product inhibits liver tumor formation in C57BL/6 mice.

Science.gov (United States)

Aslam, Muhammad N; Bergin, Ingrid; Naik, Madhav; Hampton, Anna; Allen, Ron; Kunkel, Steven L; Rush, Howard; Varani, James

2012-06-01

C57BL/6 mice were maintained for up to 18 months on high-fat and low-fat diets with or without a multi-mineral supplement derived from the skeletal remains of the red marine algae Lithothamnion calcareum. Numerous grossly observable liver masses were visible in animals on the "western-style" high-fat diet sacrificed at 12 and 18 months. The majority of the masses were in male mice (20 out of 100 males versus 3 out of 100 females; p = 0.0002). There were more liver masses in animals on the high-fat diet than on the low-fat diet (15 out of 50 on high-fat versus 5 out of 50 on low-fat; p = 0.0254). The multi-mineral supplement reduced the number of liver masses in mice on both diets (3 out of 25 male mice in the low-fat diet group without the supplement versus 1 out of 25 mice with supplement; 12 of 25 male mice in the high-fat diet group without the supplement versus 3 of 25 mice with supplement [p = 0.0129]). Histological evaluation revealed a total of 17 neoplastic lesions (9 adenomas and 8 hepatocellular carcinomas), and 18 pre-neoplastic lesions. Out of eight hepatocellular carcinomas, seven were found in unsupplemented diet groups. Steatosis was widely observed in livers with and without grossly observable masses, but the multi-mineral supplement had no effect on the incidence of steatosis or its severity. Taken together, these findings suggest that a multi-mineral-rich natural product can protect mice against neoplastic and pre-neoplastic proliferative liver lesions that may develop in the face of steatosis.

Characterization of Italian honeys (Marche Region on the basis of their mineral content and some typical quality parameters

Directory of Open Access Journals (Sweden)

Cucina Domenico

2007-06-01

Full Text Available Abstract Background The characterization of three types of Marche (Italy honeys (Acacia, Multifloral, Honeydew was carried out on the basis of the their quality parameters (pH, sugar content, humidity and mineral content (Na, K, Ca, Mg, Cu, Fe, and Mn. Pattern recognition methods such as principal components analysis (PCA and linear discriminant analysis (LDA were performed in order to classify honey samples whose botanical origins were different, and identify the most discriminant parameters. Lastly, using ANOVA and correlations for all parameters, significant differences between diverse types of honey were examined. Results Most of the samples' water content showed good maturity (98% whilst pH values were in the range 3.50 – 4.21 confirming the good quality of the honeys analysed. Potassium was quantitatively the most relevant mineral (mean = 643 ppm, accounting for 79% of the total mineral content. The Ca, Na and Mg contents account for 14, 3 and 3% of the total mineral content respectively, while other minerals (Cu, Mn, Fe were present at very low levels. PCA explained 75% or more of the variance with the first two PC variables. The variables with higher discrimination power according to the multivariate statistical procedure were Mg and pH. On the other hand, all samples of acacia and honeydew, and more than 90% of samples of multifloral type have been correctly classified using the LDA. ANOVA shows significant differences between diverse floral origins for all variables except sugar, moisture and Fe. Conclusion In general, the analytical results obtained for the Marche honeys indicate the products' high quality. The determination of physicochemical parameters and mineral content in combination with modern statistical techniques can be a useful tool for honey classification.

Mineral resources of Slovakia, questions of classification and valuation

Directory of Open Access Journals (Sweden)

Baláž Peter

1999-06-01

Full Text Available According to the Constitution of Slovak Republic, mineral resources of Slovakia are in the ownership of Slovak Republic. In 1997, 721 exclusive mineral deposits of mineral fuels, metals and industrial minerals were registered in Slovakia. The classification for economic and uneconomic reserves/resources requires an annual updating, concerning changes of market mineral prices and mine production costs. In terms of economic valuation of mineral resources, a new United Nations international classification for reserves/resources appears as a perspective alternative. Changes of geological and mining legislation are necessary for real valuation of Slovak mineral resources.

Anaerobic digestion of paunch in a CSTR for renewable energy production and nutrient mineralization

Energy Technology Data Exchange (ETDEWEB)

Nkemka, Valentine Nkongndem; Marchbank, Douglas H.; Hao, Xiying, E-mail: xiying.hao@agr.gc.ca

2015-09-15

Highlights: • Anaerobic digestion and nutrient mineralization of paunch in a CSTR. • Low CH{sub 4} yield and high CH{sub 4} productivity was obtained at an OLR of 2.8 g VS L{sup −1} day{sup −1.} • Post-digestion of the digestate resulted in a CH{sub 4} yield of 0.067 L g{sup −1} VS. • Post-digestion is recommended for further digestate stabilization. - Abstract: A laboratory study investigated the anaerobic digestion of paunch in a continuous stirred tank reactor (CSTR) for the recovery of biogas and mineralization of nutrients. At an organic loading rate (OLR) of 2.8 g VS L{sup −1} day{sup −1} with a 30-day hydraulic retention time (HRT), a CH{sub 4} yield of 0.213 L g{sup −1} VS and CH{sub 4} production rate of 0.600 L L{sup −1} day{sup −1} were obtained. Post-anaerobic digestion of the effluent from the CSTR for 30 days at 40 °C recovered 0.067 L g{sup −1} VS as CH{sub 4}, which was 21% of the batch CH{sub 4} potential. Post-digestion of the effluent from the digestate obtained at this OLR is needed to meet the stable effluent criteria. Furthermore, low levels of soluble ions such as K{sup +}, Ca{sup 2+} and Mg{sup 2+} were found in the liquid fraction of the digestate and the remainder could have been retained in the solid digestate fraction. This study demonstrates the potential of biogas production from paunch in providing renewable energy. In addition, recovery of plant nutrients in the digestate is important for a sustainable agricultural system.

Sorption Energy Maps of Clay Mineral Surfaces

International Nuclear Information System (INIS)

Cygan, Randall T.; Kirkpatrick, R. James

1999-01-01

A molecular-level understanding of mineral-water interactions is critical for the evaluation and prediction of the sorption properties of clay minerals that may be used in various chemical and radioactive waste disposal methods. Molecular models of metal sorption incorporate empirical energy force fields, based on molecular orbital calculations and spectroscopic data, that account for Coulombic, van der Waals attractive, and short-range repulsive energies. The summation of the non-bonded energy terms at equally-spaced grid points surrounding a mineral substrate provides a three dimensional potential energy grid. The energy map can be used to determine the optimal sorption sites of metal ions on the exposed surfaces of the mineral. By using this approach, we have evaluated the crystallographic and compositional control of metal sorption on the surfaces of kaolinite and illite. Estimates of the relative sorption energy and most stable sorption sites are derived based on a rigid ion approximation

Deposition and benthic mineralization of organic carbon

DEFF Research Database (Denmark)

Nordi, Gunnvor A.; Glud, Ronnie N.; Simonsen, Knud

2018-01-01

Seasonal variations in sedimentation and benthic mineralization of organic carbon (OC) were investigated in a Faroese fjord. Deposited particulate organic carbon (POC) was mainly of marine origin, with terrestrial material only accounting for b1%. On an annual basis the POC export fromthe euphotic...

STUDY ABOUT THE ACKNOWLEDGEMENT IN ACCOUNTING FOR THE SOFTWARE PRODUCTS – ON THEIR PRODUCTION AND SALE FLUX

Directory of Open Access Journals (Sweden)

Violeta Isai

2013-12-01

Full Text Available The modern economy can’t be conceived without the IT industry contribution, the engine of lasting economic development. In order to help the increase of software industry the countries create national strategies of information implementation, which will assure in time: the increase of the production, added value, productivity and international economic exchanges. In this area, Romania elaborates its own implementation strategy, according to the EU policy. On the company level, the informatics implementation raises problems regarding: the acknowledgement of software products in accounting as intangible assets; the registering of their reversible and irreversible devaluation, but also fiscal aspects about the modality of classification for the software supply – as goods delivery or as services performance, in the country and abroad.

Studi Komposisi Mineral Tepung Batu Bukit Kamang Sebagai Bahan Baku Pakan Sumber Mineral

Directory of Open Access Journals (Sweden)

Khalil

2007-04-01

Full Text Available The study was conducted to determine mineral content of limestone originated from natural deposit of Bukit Kamang for feedstuff. Six samples were prepared and chemically analyzed. The first was limestone in meal form as a product of local milling industry. Another five samples were deposit components with different color of blackish, dark blue, blue, light blue and white. There was 21 kinds of mineral determined which were divided into 3 groups: macros (Ca, P, Mg, Na, K, Cl and S, trace minerals (Mn, Zn, Fe, Cu, Se, Co and Mo and toxic elements (As, F, Hg, Cd, Pb, Ni and Cr. The results showed that Bukit Kamang’s limestone contained considerable high essential minerals of Ca, Se, Fe and Mn. The limestone consisted of 38%-40% Ca, 388 ppm Se, 295 ppm Fe and 205 ppm Mn. There were two toxic elements detected: Pb and Cd, but their concentration was found relatively low: 28 and 7 ppm, respectively.

Educational Development and Production of Accountants in Nigeria ...

African Journals Online (AJOL)

Toshiba

Accountants in Nigeria: Challenges and Way. Forward. Akhidime, Augustine ... Nigerian professional accounting regulatory bodies and tertiary educational ... Academic accountants are lecturers, tutors or teachers in educational and professional .... profile non-professional accountants in key public and private organisations ...

Australian mineral industry annual review for 1984

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

This volume of the Australian Mineral Industry Annual Review records development and performance of the Australian mineral industry during the calendar year 1984. It reports production, consumption, treatment, trade, prices, new developments, exploration, and resources for mineral commodities including fuels, and summarises equivalent developments abroad. Part 1. 'general review' after briefly surveying the world mineral industry, summarises developments in the Australian mineral industry as a whole, under the headings: the industry in the national economy, prices, exploration expenditure, investment, income tax, royalties, structural data, wages and salaries, industrial disputes, and government assistance, legislation, and controls. Part 2. 'commodity review' covers individual mineral commodity groups, from abrasives to zirconium. Part 3, 'mining census', tabulates statistics extracted from the mining census, together with some mineral processing statistics from the manufacturing census. Part 4 tabulates quantity and value data on mineral output provided by state departments of mines and their equivalents. Listed in appendices are: principal mineral producers; ore buyers and mineral dealers; government mining services; analytical laboratories; state mines departments and equivalents; industry, professional and development organisations and associations, etc; summary of mineral royalties payable in the states and territories; and summary of income tax provisions and federal government levies.

PHYTOAVAILABILITY OF COPPER IN INDUSTRIAL BY-PRODUCTS AND MINERAL FERTILIZERS

Directory of Open Access Journals (Sweden)

Camila Prado Cenciani de Souza

2015-04-01

Full Text Available Alternative copper (Cu sources could be used in fertilizer production, although the bioavailability of copper in these materials is unknown. The objective of this study was to evaluate the extractants neutral ammonium citrate (NAC, 2 % citric acid, 1 % acetic acid, 10 % HCl, 10 % H2SO4, buffer solution pH 6.0, DTPA, EDTA, water, and hot water in the quantification of available Cu content in several sources, relating them to the relative agronomic efficiency (RAE of wheat grown in a clayey Latossolo Vermelho eutrófico (Oxisol and Neossolo Quartzarênico (Typic Quartzipsamment. Copper was applied at the rate of 1.5 mg kg-1 as scrap slag, brass slag, Cu ore, granulated copper, and copper sulfate. The extractants 10 % HCl, 10 % H2SO4, and NAC extracted higher Cu concentrations. The RAE values of brass slag and Cu ore were similar to or higher than those of Cu sulfate and granulated Cu. Solubility in the 2nd NAC extractant, officially required for mineral fertilizers with Cu, was lower than 60 % for the scrap slag, Cu ore, and granulated copper sources. This fact indicates that adoption of the NAC extractant may be ineffective for industrial by-products, although no extractant was more efficient in predicting Cu availability for wheat fertilized with the Cu sources tested.

Sustainable Development Strategy for Russian Mineral Resources Extracting Economy

Science.gov (United States)

Dotsenko, Elena; Ezdina, Natalya; Prilepskaya, Angelina; Pivnyk, Kirill

2017-11-01

The immaturity of strategic and conceptual documents in the sphere of sustainable development of the Russian economy had a negative impact on long-term strategic forecasting of its neo-industrialization. At the present stage, the problems of overcoming the mineral and raw material dependence, the negative structural shift of the Russian economy, the acceleration of the rates of economic growth, the reduction of technological gap from the developed countries become strategically in demand. The modern structure of the Russian economy, developed within the framework of the proposed market model, does not generate a sustainable type of development. It became obvious that in conditions of the market processes' entropy, without neo-industrial changes, the reconstruction of industry on a new convergence-technological basis and without increasing the share of high technology production the instability of macroeconomic system, the risks of environmental and economic security of Russia are growing. Therefore, today we need a transition from forming one industry development strategy to the national one that will take into account both the social and economic and environmental challenges facing Russia as a mineral resources extracting country.

Mineral waste: the required governance environment to enable re-use

CSIR Research Space (South Africa)

Godfrey, Linda K

2007-05-01

Full Text Available extraction (adapted from Pearce and Turner 1990...................................................................................................................................14 Figure 10: Use of a tax to internalise environmental externalities (adapted... to account for 221 million tons or 47% of all mineral waste produced in South Africa (Table 4). Mineral waste is therefore the largest, single source of waste in South Africa, much of which is considered hazardous by government. Mining 87.7% Power...

Distribution of clay minerals in the process streams produced by the extraction of bitumen from Athabasca oil sands

Energy Technology Data Exchange (ETDEWEB)

Kaminsky, H.A.W.; Etsell, T.H.; Ivey, D.G. [Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical and Materials Engineering; Omotoso, O. [Natural Resources Canada, Devon, AB (Canada). CETC

2009-02-15

The clay minerals present in the oil sands were studied with particular reference to how they are partitioned in bitumen ore during the extraction process. Bitumen production from surface-mined oil sands accounts for nearly two-thirds of the total bitumen production in Alberta. Every cubic meter of mined ore results in 1.3 cubic meters of mature fine tailings (MFT). The characteristic differences between the clay minerals that report to the froth versus the tailings streams were also examined to determine which minerals could impact different unit operations in the bitumen extraction process. X-ray diffraction and random powder samples were used to quantify the clay minerals. Particle size distribution and clay activity balances were also conducted. The degree of partitioning during the conditioning and flotation stages in a batch extractor was determined by the surface properties of the clay minerals. The water-continuous tailings stream was separated into fine and coarse tailings fractions through sedimentation. The study showed that bitumen-clay interactions may be dominated by kaolinite or iron oxides. Clays are responsible for the poor settling behaviour of MFTs. The clay minerals present in the oil sands include illite, illite-smectite, kaolinite, kaolinite-smectite, and chlorite. The close proximity of the tailings ponds to the Athabasca River and volatile organic compounds (VOCs) emission require that the ponds be reclaimed to a natural landscape before mine closure. In addition to its impact on fine tailings reclamation, clay mineralogy plays a role in extraction froth flotation and emulsion stability during froth treatment. The mineralogy of the froth solids was found to be different from the mineralogy of the middlings and tailings solids. 39 refs., 6 tabs., 6 figs.

Development of taxation system for oil production companies in Russia

Science.gov (United States)

Salmina, S. V.; Sboeva, I. M.; Selivanovskaya, J. I.; Khafizova, A. R.; Fomin, V. P.

2018-01-01

The present article is devoted to the taxation system for oil production companies in Russia. The role of oil production companies in the realization of the fiscal function of the state is shown. Tax and due receipts at the consolidated budget of the Russian Federation from major economic sectors in the years 2013-2015 are presented and analysed. An investigation of oil production taxation peculiarities is carried out. In particular, mineral extraction tax analysis is made, the said tax being one of the basic taxes paid by oil production companies. The authors come to a conclusion that mineral extraction tax in Russia needs reforming. Based on the investigation realized possible ways of taxation system development in respect of oil production companies in Russia are proposed. Thus, taking into account the fact that oil industry is very important for budget revenue formation, initially it is planned to test the new taxation system principles in a limited number of deposits, so called ‘pilot projects’. For highly profitable minefield deposits it is planned to introduce progressive and regressive index, varying depending on oil prices. Within the framework of the investigation the authors come to a conclusion that it is necessary to introduce gradually the taxation system based on the definition of surplus profit depending on the cost effectiveness and taking into account oil prices.

Granite-related hypothermal uranium mineralization in South China

International Nuclear Information System (INIS)

Liu, X.; Wu, J.; Pan, J.; Zhu, M.

2014-01-01

As one of the important geological types, granite-related uranium deposits account for about 29% of the total discovered natural uranium resources in China. Most of the granite-related uranium deposits located in Taoshan - Zhuguang uranium metallogenic belt, South China. In addition to the typical pitchblende vein-type uranium mineralization of epithermal metallogenic system, a new type of granite-related uranium mineralization with characteristics of hypothermal matallogenic system was discovered in South China by current studies. However, hypothermal is contact thermal to epithermal mineralization, and not the conventional intrusive high temperature mineralization. Hypothermal uranium mineralization is presented by disseminated uraninite or pitchblende stockwork in fissures in granites normally with extensive alkaline alteration. The high temperature mineral assemblage of uraninite associate with scheelite and tourmaline was identified in hypothermal uranium mineralization. Fluid inclusion studies on this type mineralization indicated the middle to high temperature (>250℃) mineralization with the mixing evidence of ore forming solution derived from deep level, and the boiling and mixing of ore forming solution are regarded as the dominant mineralization mechanism for the precipitating of uranium. In contrast to the mineralization ages of 67 Ma to 87 Ma for typical pitchblende vein mineralization of epithermal metallogenic system, the mineralization age is older than 100 Ma for hypothermal uranium mineralization in granite. In the Shituling deposit, Xiazhuang uranium ore field, uraninite and pitchblende micro veins with extensive potassic alteration, chloritization and sericitization are hosted in fissures of Indo-Chinese epoch granites with the uranium mineralization age of 130 Ma to 138 Ma with a mineralization temperature of 290℃ to 330℃ indicated. Other examples sharing the similar characters of hypothermal uranium mineralization have been recognized in

Microbial mineralization of cis-dichloroethene and vinyl chloride as a component of natural attenuation of chloroethene contaminants under conditions identified in the field as anoxic

Science.gov (United States)

Bradley, Paul M.

2012-01-01

Chlororespiration is a key component of remediation at many chloroethene-contaminated sites. In some instances, limited accumulation of reductive dechlorination daughter products may suggest that natural attenuation is not adequate for site remediation. This conclusion is justified when evidence for parent compound (tetrachloroethene, PCE, or trichloroethene, TCE) degradation is lacking. For many chloroethene-contaminated shallow aquifer systems, however, non-conservative losses of the parent compounds are clear but the mass balance between parent compound attenuation and accumulation of reductive dechlorination daughter products is incomplete. Incomplete mass balance indicates a failure to account for important contaminant attenuation mechanisms, and is consistent with contaminant degradation to non-diagnostic mineralization products. An ongoing technical debate over the potential for mineralization of dichloroethene (DCE) and vinyl chloride (VC) to CO2 in the complete absence of diatomic oxygen has largely obscured the importance of microbial DCE/VC mineralization at dissolved oxygen (DO) concentrations below the current field standard (DO conditions. This study demonstrates that oxygen-based microbial mineralization of DCE and VC can be substantial under field conditions that are frequently characterized as "anoxic." Because mischaracterization of operant contaminant biodegradation processes can lead to expensive and ineffective remedial actions, a modified framework for assessing the potential importance of oxygen during chloroethene biodegradation was developed.

Mineral composition of organically grown tomato

Science.gov (United States)

Ghambashidze, Giorgi

2014-05-01

In recent years, consumer concerns on environmental and health issues related to food products have increased and, as a result, the demand for organically grown production has grown. Results indicate that consumers concerned about healthy diet and environmental degradation are the most likely to buy organic food, and are willing to pay a high premium. Therefore, it is important to ensure the quality of the produce, especially for highly consumed products. The tomato (Lycopersicon esculentum) is one of the most widely consumed fresh vegetables in the world. It is also widely used by the food industries as a raw material for the production of derived products such as purees or ketchup. Consequently, many investigations have addressed the impact of plant nutrition on the quality of tomato fruit. The concentrations of minerals (P, Na, K, Ca and Mg) and trace elements (Cu, Zn and Mn) were determined in tomatoes grown organically in East Georgia, Marneuli District. The contents of minerals and Mn seem to be in the range as shown in literature. Cu and Zn were found in considerably high amounts in comparison to maximum permissible values established in Georgia. Some correlations were observed between the minerals and trace elements studied. K and Mg were strongly correlated with Cu and Zn. Statistically significant difference have shown also P, K and Mg based between period of sampling.

Interrelation of accounting types in Ukraine

OpenAIRE

Задорожний, Зеновій Васильович

2015-01-01

The issue of essence of managerial and production accounting and their interrelation with other accounting types has been considered. It has been indicated that managerial accounting is a constituent of production accounting in the part of accounting for expenses.

Fenologia, brotação de gemas e produção de frutos de macieira em resposta à aplicação de cianamida hidrogenada e óleo mineral Phenology, budbreak and apple fruit production by hydrogen cyanamide and mineral oil application

Directory of Open Access Journals (Sweden)

Fernando José Hawerroth

2009-01-01

Full Text Available A aplicação de indutores de brotação é uma das principais estratégias de manejo utilizadas para minimizar os problemas da falta de frio em frutíferas de clima temperado. Em razão da influência dos indutores de brotação sobre a resposta produtiva das plantas, a mensuração de seus efeitos ao longo do ciclo produtivo torna-se importante. Assim, o presente trabalho foi desenvolvido no ciclo 2007/2008, em Caçador/SC, objetivando avaliar diferentes combinações de cianamida hidrogenada e óleo mineral sobre a fenologia, brotação de gemas e produção de frutos em macieiras. O delineamento experimental foi em blocos casualizados, com seis repetições compostas de uma planta, seguindo arranjo fatorial (5x2, com cinco níveis de indutor de brotação (1. testemunha; 2. óleo mineral 3,2%; 3. óleo mineral 3,2% + cianamida hidrogenada 0,20%; 4. óleo mineral 3,2% + cianamida hidrogenada 0,39%; 5. óleo mineral 3,2% + cianamida hidrogenada 0,59% e duas cultivares (Imperial Gala e Fuji Suprema. A aplicação dos indutores de brotação antecipou e reduziu o período de florescimento, aumentando a coincidência de florescimento das cultivares Imperial Gala e Fuji Suprema. Os indutores de brotação uniformizaram e aumentaram a brotação de gemas axilares e terminais, obtendo-se máxima brotação na cultivar Imperial Gala com 0,44% de cianamida hidrogenada e 3,2% de óleo mineral. O aumento da concentração de cianamida hidrogenada revelou a tendência de diminuir a frutificação efetiva. Observaram-se respostas diferenciadas entre tratamentos quanto à produção e à massa média dos frutos, podendo ser atribuídas ao predomínio da produção de frutos em distintas estruturas de frutificação.The budbreak promoters application is one of main management strategies used to decrease the problems of insufficient winter chilling on temperate fruit trees. Because the influence of budbreak promoters on productive behaviour of plants

25 CFR 212.46 - Inspection of premises, books, and accounts.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Inspection of premises, books, and accounts. 212.46 Section 212.46 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF... premises, books, and accounts. The provisions of § 211.46 of this subchapter are applicable to leases under...

Attaining Sustainable Growth in Nigeria: Any Role for Solid Mineral Development?

Directory of Open Access Journals (Sweden)

Richardson Kojo Edeme

2018-03-01

Full Text Available Using time series such as GDP per capita, solid minerals output, foreign trade balance, domestic interest rate, inflation, and gross domestic savings, for the period 1960-2015. the Linear Growth Regression model adopted for this study indicates that solid minerals positively impact on sustainable growth and is statistically significant. The study also found that solid mineral is highly significant but negatively related with foreign exchange due largely to illegal migration of mineral commodities across the borders of the country. In view of this, there is need for conscious inter-agency collaboration to track the volume of mineral resources illegally escaping the shores of the country without being accounted for. Besides, there should be more attention on developing the solid mineral sector to help insulate the economy from the vagaries of the present economic woes given the rising demand in solid mineral resources globally.

Australian mineral industry annual review 1977 (including information to June 1978)

Energy Technology Data Exchange (ETDEWEB)

Ward, J

1979-01-01

This article records growth of the Australian mineral industry and reports production, consumption, treatment, trade, prices, new developments, exploration, and resources for all mineral commodities including fuels. Equivalent development abroad is summarized. Appendices include principal mineral producers, associations, etc. and royalties. Black coal is described under the headings: production, ex-mine value of output, employment, wages and salaries, production per manshift, interstate trade, port facilities, consumption, stock, prices, new developments, exploration, resources, world review, and coke. There are numerous tables of data and a flow chart of the Australian black coal industry, 1977. Brown coal includes production, consumption, new developments, exploration, resources, and world review.

Modeling CO2-Water-Mineral Wettability and Mineralization for Carbon Geosequestration.

Science.gov (United States)

Liang, Yunfeng; Tsuji, Shinya; Jia, Jihui; Tsuji, Takeshi; Matsuoka, Toshifumi

2017-07-18

Carbon dioxide (CO 2 ) capture and storage (CCS) is an important climate change mitigation option along with improved energy efficiency, renewable energy, and nuclear energy. CO 2 geosequestration, that is, to store CO 2 under the subsurface of Earth, is feasible because the world's sedimentary basins have high capacity and are often located in the same region of the world as emission sources. How CO 2 interacts with the connate water and minerals is the focus of this Account. There are four trapping mechanisms that keep CO 2 in the pores of subsurface rocks: (1) structural trapping, (2) residual trapping, (3) dissolution trapping, and (4) mineral trapping. The first two are dominated by capillary action, where wettability controls CO 2 and water two-phase flow in porous media. We review state-of-the-art studies on CO 2 /water/mineral wettability, which was found to depend on pressure and temperature conditions, salt concentration in aqueous solutions, mineral surface chemistry, and geometry. We then review some recent advances in mineral trapping. First, we show that it is possible to reproduce the CO 2 /water/mineral wettability at a wide range of pressures using molecular dynamics (MD) simulations. As the pressure increases, CO 2 gas transforms into a supercritical fluid or liquid at ∼7.4 MPa depending on the environmental temperature. This transition leads to a substantial decrease of the interfacial tension between CO 2 and reservoir brine (or pure water). However, the wettability of CO 2 /water/rock systems depends on the type of rock surface. Recently, we investigated the contact angle of CO 2 /water/silica systems with two different silica surfaces using MD simulations. We found that contact angle increased with pressure for the hydrophobic (siloxane) surface while it was almost constant for the hydrophilic (silanol) surface, in excellent agreement with experimental observations. Furthermore, we found that the CO 2 thin films at the CO 2 -hydrophilic

MINERAL PROCESSING BY SHORT CIRCUITS IN PROTOPLANETARY DISKS

Energy Technology Data Exchange (ETDEWEB)

McNally, Colin P. [Niels Bohr International Academy, Niels Bohr Institute, DK-2100 Copenhagen (Denmark); Hubbard, Alexander; Mac Low, Mordecai-Mark [Department of Astrophysics, American Museum of Natural History, New York, NY 10024-5192 (United States); Ebel, Denton S. [Department of Earth and Planetary Sciences, American Museum of Natural History, New York, NY 10024-5192 (United States); D' Alessio, Paola, E-mail: cmcnally@nbi.dk, E-mail: ahubbard@amnh.org, E-mail: mordecai@amnh.org, E-mail: debel@amnh.org, E-mail: p.dalessio@crya.unam.mx [Centro de Radioastronomia y Astrofisica, Universidad Nacional Autonoma de Mexico, 58089 Morelia, MICH (Mexico)

2013-04-10

Meteoritic chondrules were formed in the early solar system by brief heating of silicate dust to melting temperatures. Some highly refractory grains (Type B calcium-aluminum-rich inclusions, CAIs) also show signs of transient heating. A similar process may occur in other protoplanetary disks, as evidenced by observations of spectra characteristic of crystalline silicates. One possible environment for this process is the turbulent magnetohydrodynamic flow thought to drive accretion in these disks. Such flows generally form thin current sheets, which are sites of magnetic reconnection, and dissipate the magnetic fields amplified by a disk dynamo. We suggest that it is possible to heat precursor grains for chondrules and other high-temperature minerals in current sheets that have been concentrated by our recently described short-circuit instability. We extend our work on this process by including the effects of radiative cooling, taking into account the temperature dependence of the opacity; and by examining current sheet geometry in three-dimensional, global models of magnetorotational instability. We find that temperatures above 1600 K can be reached for favorable parameters that match the ideal global models. This mechanism could provide an efficient means of tapping the gravitational potential energy of the protoplanetary disk to heat grains strongly enough to form high-temperature minerals. The volume-filling nature of turbulent magnetic reconnection is compatible with constraints from chondrule-matrix complementarity, chondrule-chondrule complementarity, the occurrence of igneous rims, and compound chondrules. The same short-circuit mechanism may perform other high-temperature mineral processing in protoplanetary disks such as the production of crystalline silicates and CAIs.

Moisture dependent thermal properties of hydrophilic mineral wool: application of the effective media theory

Directory of Open Access Journals (Sweden)

Iñigo Antepara

2015-09-01

Full Text Available Thermal properties of mineral wool based materials appear to be of particular importance for their practical applications because the majority of them is used in the form of thermal insulation boards. Every catalogue list of any material producer of mineral wool contains thermal conductivity, sometimes also specific heat capacity, but they give only single characteristic values for dry state of material mostly. Exposure to outside climate or any other environment containing moisture can negatively affect the thermal insulation properties of mineral wool. Nevertheless, the mineral wool materials due to their climatic loading and their environmental exposure contain moisture that can negatively affect their thermal insulation properties. Because the presence of water in mineral wool material is undesirable for the majority of applications, many products are provided with hydrophobic substances. Hydrophilic additives are seldom used in mineral wool products. However, this kind of materials has a good potential for application for instance in interior thermal insulation systems, masonry desalination, green roofs, etc. For these materials, certain moisture content must be estimated and thus their thermal properties will be different than for the dry state. On this account, moisture dependent thermal properties of hydrophilic mineral wool (HMW are studied in a wide range of moisture content using a pulse technique. The experimentally determined thermal conductivity data is analysed using several homogenization formulas based on the effective media theory. In terms of homogenization, a porous material is considered as a mixture of two or three phases. In case of dry state, material consists from solid and gaseous phase. When moistened, liquid phase is also present. Mineral wool consists of the solid phase represented by basalt fibers, the liquid phase by water and the gaseous phase by air. At first, the homogenization techniques are applied for the

High heat production granites of southwest England and their associated mineralization: a review

International Nuclear Information System (INIS)

Stone, M.; Exley, C.S.

1986-01-01

The structure of the exposed granites in Cornwall, Devon and the Scilly Isles and their geochemistry and mineralogy are described. The mineralization sequence, and the convective water circulation resulting from the presence of radioactive minerals are discussed. It is suggest that kaolinization and the redistribution of minerals are continuing because of the deep source of heat. (UK)

Deposit model for heavy-mineral sands in coastal environments: Chapter L in Mineral deposit models for resource assessment

Science.gov (United States)

Van Gosen, Bradley S.; Fey, David L.; Shah, Anjana K.; Verplanck, Philip L.; Hoefen, Todd M.

2014-01-01

This report provides a descriptive model of heavy-mineral sands, which are sedimentary deposits of dense minerals that accumulate with sand, silt, and clay in coastal environments, locally forming economic concentrations of the heavy minerals. This deposit type is the main source of titanium feedstock for the titanium dioxide (TiO2) pigments industry, through recovery of the minerals ilmenite (Fe2+TiO3), rutile (TiO2), and leucoxene (an alteration product of ilmenite). Heavy-mineral sands are also the principal source of zircon (ZrSiO4) and its zirconium oxide; zircon is often recovered as a coproduct. Other heavy minerals produced as coproducts from some deposits are sillimanite/kyanite, staurolite, monazite, and garnet. Monazite [(Ce,La,Nd,Th)PO4] is a source of rare earth elements as well as thorium, which is used in thorium-based nuclear power under development in India and elsewhere.

Business as usual? Results of Global Continuous Miner and Bolter Miner Census 2008

Energy Technology Data Exchange (ETDEWEB)

Bayer, Arne K. [RWTH Aachen (DE). Excavation and Mining Equipment Group (BGMR); E.ON Kraftwerke GmbH, Hannover (Germany); Nienhaus, Karl; Dangela, Manuel [RWTH Aachen (DE). Excavation and Mining Equipment Group (BGMR)

2009-08-27

The Global Continuous Miner and Bolter Miner Census 2008 conducted by the Excavation and Mining Equipment Group (BGMR), RWTH Aachen, identified globally the 1,400 CM production units and about 200 Bolter Miners are mainly employed in coal mining operations. The study identified a number of relevant trends of interest to both mining companies as well as original equipment manufacturers (OEM). E.g. new markets like China, India or Russia are not developing as quickly as expected, the large CM and BM nations like US, South Africa and Australia will remain saturated and the annual replacement rate of new machines will stabilize at some 160 units. Other key findings highlight the growing importance of after sales services and a stronger focus on automation, as well as, aspects of Health, Safety and Environment (HSE). (orig.)

Surface analytical techniques applied to minerals processing

International Nuclear Information System (INIS)

Smart, R.St.C.

1991-01-01

An understanding of the chemical and physical forms of the chemically altered layers on the surfaces of base metal sulphides, particularly in the form of hydroxides, oxyhydroxides and oxides, and the changes that occur in them during minerals processing lies at the core of a complete description of flotation chemistry. This paper reviews the application of a variety of surface-sensitive techniques and methodologies applied to the study of surface layers on single minerals, mixed minerals, synthetic ores and real ores. Evidence from combined XPS/SAM/SEM studies have provided images and analyses of three forms of oxide, oxyhydroxide and hydroxide products on the surfaces of single sulphide minerals, mineral mixtures and complex sulphide ores. 4 refs., 2 tabs., 4 figs

AuScope research infrastructure - supporting Australian mineral discovery

Science.gov (United States)

McInnes, B.; Rawling, T.

2016-12-01

Earth and geospatial scientists are heavy users of data products. When industry geologists access spatial data from the field and the exploration office they require data products that are discoverable, searchable, interoperable and attributed with robust metadata. Over the last decade AuScope has utilised NCRIS funding to provide a variety of data products including geophysical data (reflection and passive seismic, magnetotellurics and gravity), GIS layers from state and national geological survey organisations, hyperspectral core logging (National Virtual Core Library) and time-series geospatial data from GNSS and VLBI instruments - all delivered using AuScope GRID technologies based on the Spatial Information Services Stack (SiSS). Perhaps one of the best examples of collaboration to deliver data products to industry users is the National Mineral Library. Working with researchers at Curtin Universities John de Laeter Centre and ANDS, AuScope has also supported the development of a Laboratory Information Management System (LIMS). The project has produced an entirely new workflow, based around a TESCAN TIMA field emission scanning electron microscope, that allows metadata to be collected and recorded from the sample collection and preparation right through to data delivery and publication. This process has facilitated the scanning of a large stockpile of mineral samples from across Western Australia that will produce a state-wide Mineral Library, allowing mineral explorers to better understand the composition of critical rock outcrop samples from all over the state. This new NCRIS supported initiative provides a dataset that underpins both academic and applied research programs and is important for the economic future of Australia. Mining companies do a lot of heavy mineral analysis in research and development but, because there isn't a baseline for mineralogy across each state, it is difficult to have full confidence in the heavy mineral data. This creates an

A Statistical Review of Alternative Zinc and Copper Extraction from Mineral Fertilizers and Industrial By-Products.

Science.gov (United States)

Cenciani de Souza, Camila Prado; Aparecida de Abreu, Cleide; Coscione, Aline Renée; Alberto de Andrade, Cristiano; Teixeira, Luiz Antonio Junqueira; Consolini, Flavia

2018-01-01

Rapid, accurate, and low-cost alternative analytical methods for micronutrient quantification in fertilizers are fundamental in QC. The purpose of this study was to evaluate whether zinc (Zn) and copper (Cu) content in mineral fertilizers and industrial by-products determined by the alternative methods USEPA 3051a, 10% HCl, and 10% H2SO4 are statistically equivalent to the standard method, consisting of hot-plate digestion using concentrated HCl. The commercially marketed Zn and Cu sources in Brazil consisted of oxides, carbonate, and sulfate fertilizers and by-products consisting of galvanizing ash, galvanizing sludge, brass ash, and brass or scrap slag. The contents of sources ranged from 15 to 82% and 10 to 45%, respectively, for Zn and Cu. The Zn and Cu contents refer to the variation of the elements found in the different sources evaluated with the concentrated HCl method as shown in Table 1. A protocol based on the following criteria was used for the statistical analysis assessment of the methods: F-test modified by Graybill, t-test for the mean error, and linear correlation coefficient analysis. In terms of equivalents, 10% HCl extraction was equivalent to the standard method for Zn, and the results of the USEPA 3051a and 10% HCl methods indicated that these methods were equivalents for Cu. Therefore, these methods can be considered viable alternatives to the standard method of determination for Cu and Zn in mineral fertilizers and industrial by-products in future research for their complete validation.

Method for improving solution flow in solution mining of a mineral

International Nuclear Information System (INIS)

Moore, T.

1980-01-01

An improved method for the solution mining of a mineral from a subterranean formation containing same in which an injection and production well are drilled and completed within said formation, leach solution and an oxidant are injected through said injection well into said formation to dissolve said mineral, and said dissolved mineral is recovered via said production well, wherein the improvement comprises pretreating said formation with an acid gas to improve the permeabiltiy thereof

Mineralized Collagen: Rationale, Current Status, and Clinical Applications

Directory of Open Access Journals (Sweden)

Zhi-Ye Qiu

2015-07-01

Full Text Available This paper presents a review of the rationale for the in vitro mineralization process, preparation methods, and clinical applications of mineralized collagen. The rationale for natural mineralized collagen and the related mineralization process has been investigated for decades. Based on the understanding of natural mineralized collagen and its formation process, many attempts have been made to prepare biomimetic materials that resemble natural mineralized collagen in both composition and structure. To date, a number of bone substitute materials have been developed based on the principles of mineralized collagen, and some of them have been commercialized and approved by regulatory agencies. The clinical outcomes of mineralized collagen are of significance to advance the evaluation and improvement of related medical device products. Some representative clinical cases have been reported, and there are more clinical applications and long-term follow-ups that currently being performed by many research groups.

Constructing a research network: accounting knowledge in production

OpenAIRE

Joannides , Vassili; Berland , Nicolas

2013-01-01

Avec Nicolas Berland; International audience; Purpose - This paper contributes to the sociology-of-science type of accounting literature, addressing how accounting knowledge is established, advanced and extended. Design/methodology/approach - The research question is answered through the example of research into linkages between accounting and religion. Adopting an Actor-Network Theory (ANT) approach, we follow the actors involved in the construction of accounting as an academic discipline th...

Ecological accounting based on extended exergy: a sustainability perspective.

Science.gov (United States)

Dai, Jing; Chen, Bin; Sciubba, Enrico

2014-08-19

The excessive energy consumption, environmental pollution, and ecological destruction problems have gradually become huge obstacles for the development of societal-economic-natural complex ecosystems. Regarding the national ecological-economic system, how to make explicit the resource accounting, diagnose the resource conversion, and measure the disturbance of environmental emissions to the systems are the fundamental basis of sustainable development and coordinated management. This paper presents an extended exergy (EE) accounting including the material exergy and exergy equivalent of externalities consideration in a systematic process from production to consumption, and China in 2010 is chosen as a case study to foster an in-depth understanding of the conflict between high-speed development and the available resources. The whole society is decomposed into seven sectors (i.e., Agriculture, Extraction, Conversion, Industry, Transportation, Tertiary, and Domestic sectors) according to their distinct characteristics. An adaptive EE accounting database, which incorporates traditional energy, renewable energy, mineral element, and other natural resources as well as resource-based secondary products, is constructed on the basis of the internal flows in the system. In addition, the environmental emission accounting has been adjusted to calculate the externalities-equivalent exergy. The results show that the EE value for the year 2010 in China was 1.80 × 10(14) MJ, which is greatly increased. Furthermore, an EE-based sustainability indices system has been established to provide an epitomized exploration for evaluating the performance of flows and storages with the system from a sustainability perspective. The value of the EE-based sustainability indicator was calculated to be 0.23, much lower than the critical value of 1, implying that China is still developing in the stages of high energy consumption and a low sustainability level.

Fair value: actuarial accounting for the markets... or for the accountants?

OpenAIRE

Jerman, Lambert

2013-01-01

Fair value accounting under IAS-IFRSs is often presented as market accounting that results from expression of the financial requirements of business management and accounting practice. By showing that fair value has the features of actuarial accounting, and is the product of a conceptual shift made necessary by the contemporary context and thus in dissonance with certain aspects of current accounting practice, this article demonstrates that fair value accounting in fact represents an opportun...

Recent Progress on Data-Based Optimization for Mineral Processing Plants

Directory of Open Access Journals (Sweden)

Jinliang Ding

2017-04-01

Full Text Available In the globalized market environment, increasingly significant economic and environmental factors within complex industrial plants impose importance on the optimization of global production indices; such optimization includes improvements in production efficiency, product quality, and yield, along with reductions of energy and resource usage. This paper briefly overviews recent progress in data-driven hybrid intelligence optimization methods and technologies in improving the performance of global production indices in mineral processing. First, we provide the problem description. Next, we summarize recent progress in data-based optimization for mineral processing plants. This optimization consists of four layers: optimization of the target values for monthly global production indices, optimization of the target values for daily global production indices, optimization of the target values for operational indices, and automation systems for unit processes. We briefly overview recent progress in each of the different layers. Finally, we point out opportunities for future works in data-based optimization for mineral processing plants.

The Economic Importance of Mineral Production in Iran, Pakistan and Turkey in View of Co-operation in Mineral Exports and Interregional Trade*

Directory of Open Access Journals (Sweden)

Zeki Doğan

1968-06-01

Full Text Available Possibilities of co-operation are discussed regarding exports of mineral commodities, namely, chromite and marble which are produced by the three regional countries.  In order to improve the opportunities for the regional trade among Iran, Pakistan and Turkey, the following minerals can offer potentialities: coking coal, sulphur, barite, bentonite, magnesite, lead and zinc ores and boron minerals, which are in short supply in one country and abundant in another.

Environmental and life cycle analysis of a biodiesel production line from sunflower in the Province of Siena (Italy)

International Nuclear Information System (INIS)

Spinelli, D.; Jez, S.; Pogni, R.; Basosi, R.

2013-01-01

The Directive 2009/28/EC established the overall target that 20% of energy consumption should be represented by renewable energy sources by 2020 in each European member state. Furthermore, the Directive sets a mandatory 10% minimum target for biofuels in the transport sector. Biofuels are potentially an important alternative to mineral diesel. We propose a pilot production line of biodiesel from sunflower on local scale in the Province of Siena (Tuscany) to research a possible reduction of fossil fuel consumption in the transport sector. This study might represent an opportunity to reduce petroleum dependence in the transport sector. Environmental Impact Indicators were provided by Material Flow Accounting, Embodied Energy Analysis and Emergy Accounting. Results showed that agricultural phase is the critical step in the production line. A comparative Life Cycle Assessment analysis for the biodiesel production line with mineral diesel production showed environmental advantages of the biofuel production, however requiring a higher land demand. Therefore, biodiesel may not the optimal solution on large scale but might be a good alternative to fossil fuel. This would depend upon the entire production cycle taking place in a limited area. This is necessary in order to fulfill the needs of local farms and small enterprises. - Highlights: • Environmental profile of the biodiesel production from sunflower was evaluated. • Agricultural phase is the critical step in the whole production line. • Biodiesel from sunflower cannot be considered a totally renewable energy source. • Biodiesel shows advantages in respect to mineral diesel but a higher land demand. • Biodiesel mix may be a good solution on local scale

The influence of site factors on nitrogen mineralization in forest soils ...

African Journals Online (AJOL)

The influence of site factors on nitrogen mineralization in forest soils of the ... on N mineralization, as well as the effect of N mineralization on forest productivity. ... of the natural log of mean annual temperature, geological substrate and total N ...

Penggunaan Formula Mineral Lokal dalam Ransum Ayam Petelur

Directory of Open Access Journals (Sweden)

Khalil

2010-08-01

Full Text Available A mineral formula composed of three locally available materials: limestone originated from Bukit Kamang of West Sumatra, freshwater oyster shell and bone meal and fortified with micro minerals of Cu, Zn and I was investigated as mineral supplement for diet of laying hens. The experimental diets were: P0 (diet contained of 6% commercial mineral, P1 (diet contained of 6% local mineral, P2 (diet contained of 6% Bukit Kamangs’ limestone and P3 (diet contained of 6% fresh water oyster shell meal. The total of four experimental diets was then fed to 120 laying hens. The hens were divided into 3 groups based on body weight: heavy, medium and light. Each group was subdivided into 4 subgroups in accordance with number of treatments, so that each treatment consisted of 3 replicates containing of 10 hens. Parameters measured included: feed intake, hen-day egg production, feed conversion ratio (FCR, eggshell quality, mineral retention and mineral composition of tibia bone. Data were subjected to statistical analysis using variance analysis in a completely block design with 4 treatments and 3 blocks as replicates The results showed that the egg weight and eggshell qualities were found not significantly difference, but different mineral sources gave significant effect on egg production and bone mineralization. The laying performances and tibia bone weight of chickens fed diet mixed with the local mineral formula were found not significantly different with those fed diet mixed with commercial formula, but significantly better (P<0.05 than those of fed diet mixed with only limestone or oyster shell. Hens fed with diet mixed with Bukit Kamangs’ limestone showed better performances and heavier tibia bone than those fed with diet mixed with oyster shell. It was concluded that the local mineral formula could be used as sole mineral source for laying hens. The nutritive value of Bukit Kamangs’ limestone was better than that of fresh water oyster shell.

Mars weathering analogs - Secondary mineralization in Antarctic basalts

Science.gov (United States)

Berkley, J. L.

1982-01-01

Alkalic basalt samples from Ross Island, Antarctica, are evaluated as terrestrial analogs to weathered surface materials on Mars. Secondary alteration in the rocks is limited to pneumatolytic oxidation of igneous minerals and glass, rare groundmass clay and zeolite mineralization, and hydrothermal minerals coating fractures and vesicle surfaces. Hydrothermal mineral assemblages consist mainly of K-feldspar, zeolites (phillipsite and chabazite), calcite, and anhydrite. Low alteration rates are attributed to cold and dry environmental factors common to both Antarctica and Mars. It is noted that mechanical weathering (aeolian abrasion) of Martian equivalents to present Antarctic basalts would yield minor hydrothermal minerals and local surface fines composed of primary igneous minerals and glass but would produce few hydrous products, such as palagonite, clay or micas. It is thought that leaching of hydrothermal vein minerals by migrating fluids and redeposition in duricrust deposits may represent an alternate process for incorporating secondary minerals of volcanic origin into Martian surface fines.

The best I can be: how self-accountability impacts product choice in technology mediated environments

OpenAIRE

Rowe, Zoe O.; Wilson, Hugh; Dimitriu, Radu; Breiter, Katja; Charnley, Fiona

2017-01-01

Technology-mediated environments are important not only as the location for an increasing proportion of purchases, but also as an even more pervasive part of the purchase journey. While most research into online consumer behavior focuses on attitudes as an antecedent of product choice, this article focuses on an important but hardly explored variable that may be impacted by technology-mediated environments: self-accountability. Laboratory experiments suggest that self-accountability may influ...

Long-term changes in primary production and mineralization of organic matter in the Neva Estuary (Baltic Sea)

Science.gov (United States)

Golubkov, Sergey; Golubkov, Mikhail; Tiunov, Alexei; Nikulina, Vera

2017-07-01

The Neva Estuary situated in the eastern part of the Gulf of Finland is one of the largest estuaries of the Baltic Sea. At present, heavy nutrient and organic matter loading, mainly from the Neva River and point sources in the upper estuary are the most serious environmental problem for the Neva Estuary and adjacent parts of the eastern Gulf of Finland. Long-term studies of mid-summer primary production and mineralization of organic matter were conducted in upper and middle parts of the Neva Estuary. A considerable increase of production and biomass of phytoplankton was observed in the middle part of the estuary during the last decades mainly due to an increase in biomass of cyanobacteria. However, they are mostly concentrated in the upper water layers and only a small part of them reached the near bottom water layers and may be used as a food by zoobenthos. The mineralization of organic matter in the water column was twice higher than primary production that indicates the importance of allochthonous organic matter in the carbon budget of the both parts of the estuary. The carbon isotope signature of seston and most of the zoobenthic species in the upper part of the estuary was close to the signature of allochthonous carbon leaking from watershed (- 27‰). Higher values of δ13C of seston in the upper mix layer of the Middle estuary indicate intensive primary production in mid-summer. The carbon isotopic signature of zoobenthos in this part of the estuary was also in general lower than in the Neva Bay reflected higher importance of autochthonous organic matter in food webs of the estuary.

ENVIRONMENTAL ACCOUNTING IN AGRICULTURE: NUTRIENT ACCOUNTING AND OTHER ASPECTS

Directory of Open Access Journals (Sweden)

P URFI

2003-04-01

Full Text Available While traditional accounting focuses on accounting for capital assets, costs, yields valued and sold in the market, environmental accounting intends to do the same with non-marketed capital assets, costs and yields, that is, externalities. The farm level nutrient balances are based on an input-output comparison, in which the nutrients entering the farm within inputs are compared to nutrients leaving the farm within the sold products. The method considers the amounts of nutrients entering the farm but not leaving it with the products to be wastes polluting the environment. The weakness of this approach is the handling of stock changes. In a farming year high amounts of nutrients contained in unsold products are not wastes, nor are they stored in the soil, but are stored in the stocks. To handle this problem the concepts of external nutrient balance and internal nutrient balance are introduced, and are tested in case studies of two Hungarian mixed farms.

Minerals Yearbook, volume II, Area Reports—Domestic

Science.gov (United States)

,

2018-01-01

The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

Minerals Yearbook, volume III, Area Reports—International

Science.gov (United States)

,

2018-01-01

The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

Geochemical modeling of the influence of silicate mineral alteration on alkalinity production and carbonate precipitation

Science.gov (United States)

Herda, Gerhard; Kraemer, Stephan M.; Gier, Susanne; Meister, Patrick

2016-04-01

High CO2 partial pressure (pCO2) in deep rock reservoirs causes acidification of the porefluid. Such conditions occur during injection and subsurface storage of CO2 (to prevent the release of greenhouse gas) but also naturally in zones of strong methanogenic microbial activity in organic matter-rich ocean margin sediments. The acidic fluids are corrosive to carbonates and bear the risk of leakage of CO2 gas to the surface. Porefluid acidification may be moderated by processes that increase the alkalinity, i.e. that produce weak acid anions capable of buffering the acidification imposed by the CO2. Often, alkalinity increases as a result of anaerobic microbial activity, such as anaerobic oxidation of methane. However, on a long term the alteration of silicates, in particular, clay minerals, may be a more efficient mechanism of alkalinity production. Under altered temperature, pressure and porefluid composition at depth, clay minerals may change to thermodynamically more stable states, thereby increasing the alkalinity of the porefluid by partial leaching of Mg-(OH)2 and Ca-(OH)2 (e.g. Wallmann et al., 2008; Mavromatis et al., 2014). This alteration may even be enhanced by a high pCO2. Thus, silicate alteration can be essential for a long-term stabilization of volatile CO2 in the form of bicarbonate or may even induce precipitation of carbonate minerals, but these processes are not fully understood yet. The goal of this study is to simulate the alkalinity effect of silicate alteration under diagenetic conditions and high pCO2 by geochemical modeling. We are using the program PHREEQC (Parkhurst and Appelo, 2013) to generate high rock/fluid ratio characteristics for deep subsurface rock reservoirs. Since we are interested in the long-term evolution of diagenetic processes, over millions of years, we do not consider kinetics but calculate the theoretically possible equilibrium conditions. In a first step we are calculating the saturation state of different clay minerals

Natural radionuclides in some romanian medicinal mineral water

Energy Technology Data Exchange (ETDEWEB)

Botezatu, E.; Iacob, O. [Institute of Public Health, Iasi (Romania)

2006-07-01

Radioactive minerals occur irregularly in the bedrock, similar to other minerals and they dissolve easily in water. Bedrock contains naturally occurring radioactivity including uranium, thorium, radium and potassium. The natural radioactivity results from water passing through deposits of naturally occurring radioactive materials.Many mineral water springs are traditionally used as drinking mineral water sources in the area.During the period from 1997 to 2000, we accomplished a study that had as basic objectives the radioacty control of the drinking mineral waters according to existing standards and evaluation of doses to population by ingestion of mineral water (bottled waters commercially available for human intake and some spring waters).For this reason, we were interested in finding out the extent to which these waters can be a natural radiation source. This survey aimed at assessing the radioactive content of these waters and their contribution to the population exposure.The presented data contribute to a national database concerning the natural radioactive content of Romanian mineral waters. A hypothetical person that undergoes a cure of mineral water by ingestion, inhalation and immersion is receiving an average supplementary dose of 3 {mu}Sv over background radiation of 2,512 {mu}Sv.y{sup -1} due to all natural radiation sources in Romania. The contribution of mineral water used in therapeutic purposes to the natural irradiation of population is very slight, almost insignificant. This supports the conclusion that these spring mineral waters can be used without any restrictions for drinking or bathing / washing for medical therapy of ailing persons even other sources of exposure are also taken into account. (N.C.)

Extracellular electron transfer mechanisms between microorganisms and minerals

Energy Technology Data Exchange (ETDEWEB)

Shi, Liang; Dong, Hailiang; Reguera, Gemma; Beyenal, Haluk; Lu, Anhuai; Liu, Juan; Yu, Han-Qing; Fredrickson, James K.

2016-08-30

Electrons can be transferred from microorganisms to multivalent metal ions that are associated with minerals and vice versa. As the microbial cell envelope is neither physically permeable to minerals nor electrically conductive, microorganisms have evolved strategies to exchange electrons with extracellular minerals. In this Review, we discuss the molecular mechanisms that underlie the ability of microorganisms to exchange electrons, such as c-type cytochromes and microbial nanowires, with extracellular minerals and with microorganisms of the same or different species. Microorganisms that have extracellular electron transfer capability can be used for biotechnological applications, including bioremediation, biomining and the production of biofuels and nanomaterials.

Pyrite formation and mineral transformation pathways upon sulfidation of ferric hydroxides depend on mineral type and sulfide concentration

NARCIS (Netherlands)

Peiffer, Stefan; Behrends, Thilo; Hellige, Katrin; Larese-Casanova, Philip; Wan, Moli; Pollok, Kilian

2015-01-01

The reaction of ferric (hydr)oxides with dissolved sulfide does not lead to the instantaneous production of thermodynamically stable products but can induce a variety of mineral transformations including the formation of metastable intermediates. The importance of the various transformation pathways

Systems work for Plutonium Fuel Production Facility (PFPF) near-real-time accounting

International Nuclear Information System (INIS)

Picard, R.R.; Hafer, J.F.; Pillay, K.K.S.; Takahashi, S.; Ohtani, T.; Eguchi, K.; Seya, M.

1990-01-01

A joint effort by the Los Alamos National Laboratory and the Power Reactor and Nuclear Fuel Development Corporation of Japan examines materials accounting for the Plutonium Fuel Production Facility. A unique feature of the systems work is a sophisticated data generator. This software follows individual items throughout the process, creating detailed data files for variance propagation. The data generator deals with user-specified process operations and handles related accounting problems, such as the tracking of individual measurements through numerous blending and splitting procedure, frequent decay correction (important for large inventories), scrap recovery, and automated determination of static inventory. There is no need to rely on simplified assumptions regarding process operation and material measurement. Also, the joint study applies recent theoretical work on stratified inspection of nonhomogeneous inventories and sequential analysis of MUF -- D. 4 refs

Nuclear technology and mineral recovery

International Nuclear Information System (INIS)

Stewart, Richard M.; Niermeyer, Karl E.

1970-01-01

The particular aspect of nuclear technology most applicable to the mineral field, as has been pointed out by various authors, is nuclear blasting. The prime target for this nuclear blasting has usually been a large disseminated deposit of copper mineralization which, because of large dimensions, employs the nuclear devices most effectively. From the work of the AEC we know that the larger nuclear devices fragment rock for a lower energy cost per unit of ground broken than do smaller nuclear devices or chemical explosives. A mineralized deposit near the surface is usually not amenable to nuclear fragmentation, nor are the more deeply buried thin deposits. Also, one would not anticipate fragmenting a zone of excessively erratic mineralization with nuclear devices. Many of our mineralized areas would be eliminated using the above criteria, so at this point you are well aware that my self-imposed limitation is to nuclear blasting and large disseminated copper deposits. As with most other industries, copper mining faces rising costs and greater demands for its products. One of the rising cost features peculiar to extractive industries is the reliance placed on production from lower grade deposits as the higher grade deposits are depleted. As the grade or metal content of an orebody decreases more material must be handled to produce a given amount of metal. The increased volume of ore which must be handled as the grade declines requires expansion of facilities and higher capital expenditures. Expansion of facilities for mining, milling, and concentrating of the ore increases the per unit capital cost of the end product--copper. Increased copper consumption will aggravate this situation with demand for more metal, much of which will have to be obtained from lower grade deposits. As the higher grade deposits are depleted, future production will come from those deposits which cannot be exploited economically today. Most familiar of the proposed new methods for copper mining

Nuclear technology and mineral recovery

Energy Technology Data Exchange (ETDEWEB)

Stewart, Richard M; Niermeyer, Karl E [Anaconda Company, Salt Lake City, UT (United States)

1970-05-15

The particular aspect of nuclear technology most applicable to the mineral field, as has been pointed out by various authors, is nuclear blasting. The prime target for this nuclear blasting has usually been a large disseminated deposit of copper mineralization which, because of large dimensions, employs the nuclear devices most effectively. From the work of the AEC we know that the larger nuclear devices fragment rock for a lower energy cost per unit of ground broken than do smaller nuclear devices or chemical explosives. A mineralized deposit near the surface is usually not amenable to nuclear fragmentation, nor are the more deeply buried thin deposits. Also, one would not anticipate fragmenting a zone of excessively erratic mineralization with nuclear devices. Many of our mineralized areas would be eliminated using the above criteria, so at this point you are well aware that my self-imposed limitation is to nuclear blasting and large disseminated copper deposits. As with most other industries, copper mining faces rising costs and greater demands for its products. One of the rising cost features peculiar to extractive industries is the reliance placed on production from lower grade deposits as the higher grade deposits are depleted. As the grade or metal content of an orebody decreases more material must be handled to produce a given amount of metal. The increased volume of ore which must be handled as the grade declines requires expansion of facilities and higher capital expenditures. Expansion of facilities for mining, milling, and concentrating of the ore increases the per unit capital cost of the end product--copper. Increased copper consumption will aggravate this situation with demand for more metal, much of which will have to be obtained from lower grade deposits. As the higher grade deposits are depleted, future production will come from those deposits which cannot be exploited economically today. Most familiar of the proposed new methods for copper mining

36 CFR 292.66 - Operating plan requirements-outstanding mineral rights.

Science.gov (United States)

2010-07-01

... products, insecticides, pesticides, and herbicides that will be used during the mineral operation and the...-site and off-site damage to natural resources resulting from mineral operations. The plan must: (i...

A Lightweight Monitoring and Accounting System for LHCb DC'04 Production

CERN Document Server

Sánchez-García, M; Graciani-Díaz, R; Saborido-Silva, J J; Vizcaya-Carrillo, R

2005-01-01

The phase 1 of the LHCb Data Challenge 04[1] includes the simulation of 200 million simulated events using distributed computing resources on 63 sites and spanning over 4 months. This was achieved using the DIRAC [2] distributed computing Grid infrastructure. Job Monitoring and Accounting services have been developed to track the status of the production and to evaluate the results at the end of the Data Challenge. The end user connects with a web browser to Web-Server applications showing dynamic reports for a whole set of possible queries. These applications in turn interrogate the Job Monitoring Service and Accounting Database by means of dedicated XML-RPC interfaces, querying for the information requested by the user. The reports provide a uniform view of the usage of the computing resources available. All the system components are implemented as a set of cooperating python classes following the design choice of LHCb. The different services are distributed over a number of independent machines. This allow...

Provisional 2008 assessment of solid mineral fuels

International Nuclear Information System (INIS)

2009-03-01

This article first comments data on solid mineral fuel consumption in France in 2008, i.e., the overall consumption, and the consumption by different sectors (energy production in coal plants, iron and steel industry, other industries, housing and office buildings). Then, it comments solid mineral fuel imports and their origins. It comments and explains the price evolution since 1999 (notably on the Antwerp-Rotterdam-Amsterdam market) in relationship with maritime transport price, availabilities and problems, and with the evolution of coal demand (notably in China) and oil prices. Finally, it briefly comments the French residual production and stocks

Economic drivers of mineral supply

Science.gov (United States)

Wagner, Lorie A.; Sullivan, Daniel E.; Sznopek, John L.

2003-01-01

The debate over the adequacy of future supplies of mineral resources continues in light of the growing use of mineral-based materials in the United States. According to the U.S. Geological Survey, the quantity of new materials utilized each year has dramatically increased from 161 million tons2 in 1900 to 3.2 billion tons in 2000. Of all the materials used during the 20th century in the United States, more than half were used in the last 25 years. With the Earth?s endowment of natural resources remaining constant, and increased demand for resources, economic theory states that as depletion approaches, prices rise. This study shows that many economic drivers (conditions that create an economic incentive for producers to act in a particular way) such as the impact of globalization, technological improvements, productivity increases, and efficient materials usage are at work simultaneously to impact minerals markets and supply. As a result of these economic drivers, the historical price trend of mineral prices3 in constant dollars has declined as demand has risen. When price is measured by the cost in human effort, the price trend also has been almost steadily downward. Although the United States economy continues its increasing mineral consumption trend, the supply of minerals has been able to keep pace. This study shows that in general supply has grown faster than demand, causing a declining trend in mineral prices.

Effects of iron-containing minerals on hydrothermal reactions of ketones

Science.gov (United States)

Yang, Ziming; Gould, Ian R.; Williams, Lynda B.; Hartnett, Hilairy E.; Shock, Everett L.

2018-02-01

Hydrothermal organic transformations occurring in geochemical processes are influenced by the surrounding environments including rocks and minerals. This work is focused on the effects of five common minerals on reactions of a model ketone substrate, dibenzylketone (DBK), in an experimental hydrothermal system. Ketones play a central role in many hydrothermal organic functional group transformations, such as those converting hydrocarbons to oxygenated compounds; however, how these minerals control the hydrothermal chemistry of ketones is poorly understood. Under the hydrothermal conditions of 300 °C and 70 MPa for up to 168 h, we observed that, while quartz (SiO2) and corundum (Al2O3) had no detectable effect on the hydrothermal reactions of DBK, iron-containing minerals, such as hematite (Fe2O3), magnetite (Fe3O4), and troilite (synthetic FeS), accelerated the reaction of DBK by up to an order of magnitude. We observed that fragmentation products, such as toluene and bibenzyl, dominated in the presence of hematite or magnetite, while use of troilite gave primarily the reduction products, e.g., 1, 3-diphenyl-propane and 1, 3-diphenyl-2-propanol. The roles of the three iron minerals in these transformations were further explored by (1) control experiments with various mineral surface areas, (2) measuring H2 in hydrothermal solutions, and (3) determining hydrogen balance among the organic products. These results suggest the reactions catalyzed by iron oxides (hematite and magnetite) are promoted mainly by the mineral surfaces, whereas the sulfide mineral (troilite) facilitated the reduction of ketone in the reaction solution. Therefore, this work not only provides a useful chemical approach to study and uncover complicated hydrothermal organic-mineral interactions, but also fosters a mechanistic understanding of ketone reactions in the deep carbon cycle.

Lean accounting – as a future accounting system

Directory of Open Access Journals (Sweden)

M.V. Koryagin

2017-12-01

Full Text Available The historical development of lean accounting is researched. The comparison of lean accounting and accounting is carried out. The article determines the lean accounting basic principles, which are the basis for the selection of main ten steps of upgrading to the system of lean accounting: the evaluation of the current situation and the expected development prospects of the enterprise; the development of the principles of implementing lean accounting; the determining the production parameters and methodology of the economic model construction; the organization of lean manufacturing environment and reducing most of the stock; the determining the flow of value creation; the rejection of variable accounting and reverse cancellation of all labor costs and the cost of materials; the rejection of tracking stocks and assign of the costs directly to the costs of sales when occurred; the definition of client-targeted spending; the relationship with suppliers and automation of the accounts payable; the relationship with customers and automation of the payments received.

Resource nationalism in Indonesia—Effects of the 2014 mineral export ban

Science.gov (United States)

Lederer, Graham W.

2016-09-27

Resource nationalism encompasses a broad range of political and economic actions taken by Governments to regulate the extraction of natural resources within their borders. Policies such as increased tariffs or export restrictions can have far-reaching economic effects on international trade. As the Governments of several developing countries consider enacting nationalistic policies, an examination of the 2014 mineral export ban in Indonesia provides an instructive example of the possible impacts of resource nationalism. Significant changes in the production and trade of unprocessed (that is, ores and concentrates) and processed (that is, refined metal) aluminum, copper, and nickel before and after the export ban form the basis of this study.The U.S. Geological Survey (USGS) National Minerals Information Center (NMIC) tracks production and trade of mineral commodities between producer and consumer countries. Materials flow studies clarify the effects of an export ban on different mineral commodities by assessing changes in production, processing capacity, and trade. Using extensive data collection and monitoring procedures, the USGS NMIC investigated the effects of resource nationalism on the flow of mineral commodities from Indonesia to the global economy.

Accounting for the water impacts of ethanol production

International Nuclear Information System (INIS)

Fingerman, Kevin R; Torn, Margaret S; Kammen, Daniel M; O'Hare, Michael H

2010-01-01

Biofuels account for 1-2% of global transportation fuel and their share is projected to continue rising, with potentially serious consequences for water resources. However, current literature does not present sufficient spatial resolution to characterize this localized effect. We used a coupled agro-climatic and life cycle assessment model to estimate the water resource impacts of bioenergy expansion scenarios at a county-level resolution. The study focused on the case of California, with its range of agroecological conditions, water scarcity, and aggressive alternative fuel incentive policies. Life cycle water consumption for ethanol production in California is up to 1000 times that of gasoline due to a cultivation phase that consumes over 99% of life cycle water use for agricultural biofuels. This consumption varies by up to 60% among different feedstocks and by over 350% across regions in California. Rigorous policy analysis requires spatially resolved modeling of water resource impacts and careful consideration of the various metrics that might act to constrain technology and policy options.

Economical evaluation of mineral reserves. Economicheskaya otsenka minerae'nykh resursov

Energy Technology Data Exchange (ETDEWEB)

Astakhov, A S

1981-01-01

An approach to the evaluation of mineral resources is presented which takes into account a number of interrelated economical, technological and social aspects. The basic pattern of man and environment interaction in the process of mineral resources recovery is analyzed. Various approaches to classification of mineral resources are presented. Problems related to the development of a criterion and a system of factors characteristic for particular aspects of mineral resources management are discussed in detail. A dynamic approach to the economical evaluation of mineral reserves based on the form, magnitude, and the moment of time when the compensation of damage caused by the loss of resources in question becomes necessary, is presented. The influence of typical technical restrictions on the capacity of mining enterprises and the succession of the development of a field is discussed. Dynamic aspects of the evaluation of promising mineral reserves as a limited and nonreproducible natural resource is studied in detail. Actual methods and the state of current studies in the field of the economical evaluation of mineral deposits in the USSR, the CMEA countries and in capitalistic countries are presented.

Key issues in the outlook for minerals and energy

International Nuclear Information System (INIS)

Waring, T.; Love, G.; Hogan, J.; Gooday, P.

1996-01-01

The outlook for Australia's minerals and energy sector continues to be positive because of the flow-on effects of economic growth in the newly industrialized Asia. The East Asian share of mineral and energy commodities continues to expand reflecting the growing demand for consumer goods and new economic and social infrastructure. Uncertainties in the minerals and energy outlook include the future economic performance of the developed countries and the former Soviet Union, trade and environmental issues and the effects of changing technology on minerals and energy production and consumption. Encouraged by good prospects for exploration success and firmer markets, real exploration expenditure is forecast to continue to rise and the volume of Australian mine production is expected to rise by 14 percent between 1995-6 and 2000-1. Export earnings from mineral and energy commodities are expected to rise by $5.6 billion Australian (16 percent) from 1995-6 levels to reach $41.9 billion in real terms by 2000-1. (author). 2 tabs., 14 figs., 14 refs

Modernisation of the mineral oil industry in the new Laender

International Nuclear Information System (INIS)

Schlueter, P.

1995-01-01

The structural differences between the energy economies of the two Germanies on the advent of reunification could hardly have been greater. The centralist, planned economy was oriented to autarky and therefore relied heavily on its domestic energy source of brown coal. In 1989 brown coal accounted for 68.4%, hence more than two thirds, of the Democratic Republic's total primary energy consumption of 128 million t of coal equivalent. Its corresponding share in the old Laender was only 23.5%. In the old Laender mineral oil with a share of 40% represented the prime energy source, whereas in the new Laender it accounted for only 14% of primary energy consumption. However, this small proportion in no way reflects the true significance of the mineral oil industry in the former GDR. (orig.) [de

Rate coefficients of exchange reactions accounting for vibrational excitation of reagents and products

Science.gov (United States)

Kustova, E. V.; Savelev, A. S.; Kunova, O. V.

2018-05-01

Theoretical models for the vibrational state-resolved Zeldovich reaction are assessed by comparison with the results of quasi-classical trajectory (QCT) calculations. An error in the model of Aliat is corrected; the model is generalized taking into account NO vibrational states. The proposed model is fairly simple and can be easily implemented to the software for non-equilibrium flow modeling. It provides a good agreement with the QCT rate coefficients in the whole range of temperatures and reagent/product vibrational states. The developed models are tested in simulations of vibrational and chemical relaxation of air mixture behind a shock wave. The importance of accounting for excitated NO vibrational states and accurate prediction of Zeldovich reactions rates is shown.

[Mineral water as a cure].

Science.gov (United States)

Nocco, Priska Binz

2008-01-01

The treatment of diseases with mineral spring water belongs to the oldest medical therapies. The "remedy" mineral water is therefore of importance also within the pharmacy. The present pharmacy historical work examines the impact of the use of mineral waters, as well as of their dried components, as therapeutic agents in the 19th and early 20th centuries, i.e. from approx. 1810 to 1930, as well as the contributions given by pharmacists in the development and analysis of mineral water springs. Beside these aspects, the aim here is also to describe the role played by pharmacists in the production of artificial mineral water as well as in the sale and wholesale of natural and artificial mineral water. In the first part of this work the situation in Switzerland and its surrounding countries, such as Germany, France, Italy and Austria, is discussed. The second part contains a case-study of the particular situation in the Canton Tessin. It is known from the scientific literature published at that time that information on mineral water was frequently reported. Starting from the beginning of the 19th century the number of such publications increased tremendously. The major part of them were publications in scientific journals or contributions to medical and pharmaceutical manuals and reference books. In particular the spa-related literature, such as spa-guides, was of growing interest to a broad public. The inclusion of monographs into the Swiss, the Cantonal as well the foreign pharmacopoeias granted a legal frame for the mineral waters and their dried components. These works are of major importance from a pharmacy historical standpoint and represent a unique proof of historical evidence of the old medicinal drug heritage. The most frequently used therapies based on mineral waters were drinking and bath cures. Several diseases, particularly those of a chronic character, were treated with mineral waters. The positive influence of these cures on the recovery of the patients

43 CFR 19.8 - Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

Science.gov (United States)

2010-10-01

... patents, and mineral leasing within National Forest Wilderness. 19.8 Section 19.8 Public Lands: Interior... § 19.8 Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest... locations, mineral patents, and mineral leasing within National Forest Wilderness are contained in parts...

Fine grinding of brittle minerals and materials by jet mill

Directory of Open Access Journals (Sweden)

Lek Sikong

2008-05-01

Full Text Available Various variables affecting grinding, such as air pressure, minerals or materials hardness, feed size were investigated.The limitations of grinding of gypsum, barite, ilmenite, quartz and ferrosilicon were also elucidated by means of particlefineness size distribution and morphology of ground products. It was found that:1 The density of particles, which are in the grinding zone affects the product fineness, i.e. higher feed rate resultsin a larger product size. The appropriate feed rate is suggested to be 0.2~0.5 g/s. Moreover, the density and hardness ofminerals or materials tend to have an effect on the product fineness. Heavy minerals, such as barite or ilmenite, exhibit afiner product size than lighter minerals, like quartz. However, for quartz, the higher hardness also results in a larger d50.2 Air pressure is the most vital variable which affects the grinding by a jet mill. The d50 seems to relate to theapplied air pressure as a power law equation expressed as following:d50 = aP b ; as P 0The a-value and b-value have been found to correlate to the feed size. The higher the air pressure applied the finerthe product size attained. Moreover, air pressure has a greater effect on hard minerals than on softer ones.3 Feed size seems to have a small effect on ground the product fineness of soft materials, such as gypsum andbarite, but a significant effect on that of hard materials, such as ferrosilicon and quartz, in particularly by milling at low airpressures of 2~3 kg/cm2.4 For the breakage behavior and morphology of ground materials, it was also found that the minerals having cleavages,such as gypsum and barite, tend to be broken along their cleavage planes. Thus, the particle size distribution of theseproducts becomes narrower. While quartz, ilmenite, and ferrosilicon have shattering and chipping breakage mechanisms,grinding results in angular shapes of the ground products and a wider size distribution. Blocks or platelets and

Potential substitution of mineral P fertilizer by manure: EPIC development and implementation

Science.gov (United States)

Azevedo, Ligia B.; Vadas, Peter A.; Balkovič, Juraj; Skalský, Rastislav; Folberth, Christian; van der Velde, Marijn; Obersteiner, Michael

2016-04-01

Sources of mineral phosphorus (P) fertilizers are non-renewable. Although the longevity of P mines and the risk of future P depletion are highly debated P scarcity may be detrimental to agriculture in various ways. Some of these impacts include increasing food insecurity and nitrogen (N) and P imbalances, serious fluctuations in the global fertilizer and crop market prices, and contribution in geopolitical conflicts. P-rich waste produced from livestock production activities (i.e. manure) are an alternative to mineral P fertilizer. The substitution of mineral fertilizer with manure (1) delays the depletion of phosphate rock stocks, (2) reduces the vulnerability of P fertilizer importing countries to sudden changes in the fertilizer market, (3) reduces the chances of geopolitical conflicts arising from P exploitation pressures, (4) avoids the need for environmental protection policies in livestock systems, (5) is an opportunity for the boosting of crop yields in low nutrient input agricultural systems, and (6) contributes to the inflow of not only P but also other essential nutrients to agricultural soils. The Environmental Policy Integrated Climate model (EPIC) is a widely used process-based, crop model integrating various environmental flows relevant to crop production as well as environmental quality assessments. We simulate crop yields using a powerful computer cluster infra-structure (known as EPIC-IIASA) in combination with spatially-explicit EPIC input data on climate, management, soils, and landscape. EPIC-IIASA contains over 131,000 simulation units and it has 5 arc-min resolution. In this work, we implement two process-based models of manure biogeochemistry into EPIC-IIASA, i.e. SurPhos (for P) and Manure DNDC (for N and carbon) and a fate model model describing nutrient outflows from fertilizer via runoff. For EGU, we will use EPIC-IIASA to quantify the potential of mineral P fertilizer substitution with manure. Specifically, we will estimate the relative

An exploration in mineral supply chain mapping using tantalum as an example

Science.gov (United States)

Soto-Viruet, Yadira; Menzie, W. David; Papp, John F.; Yager, Thomas R.

2013-01-01

This report uses the supply chain of tantalum (Ta) to investigate the complexity of mineral and metal supply chains in general and show how they can be mapped. A supply chain is made up of all the manufacturers, suppliers, information networks, and so forth, that provide the materials and parts that go into making up a final product. The mineral portion of the supply chain begins with mineral material in the ground (the ore deposit); extends through a series of processes that include mining, beneficiation, processing (smelting and refining), semimanufacture, and manufacture; and continues through transformation of the mineral ore into concentrates, refined mineral commodities, intermediate forms (such as metals and alloys), component parts, and, finally, complex products. This study analyses the supply chain of tantalum beginning with minerals in the ground to many of the final goods that contain tantalum.

Uranium in accessory sphene from granitoids and its behaviour during mineral's alteration (Muzbekskij pluton at Mogol-Tau, Central Asia)

International Nuclear Information System (INIS)

Simonova, L.I.; Maksimova, I.G.; Nad'yarnykh, V.G.; Voronikhin, V.A.

1982-01-01

Uranium behaviour in accessory spbene and products of its alteration at different stages of granitoid transformation with characteristic association of zirconium-apatite-sphene and magnetite of accessory minerals, is shown. The products of sphene alteration (due to propylitization of granatoids the sphene is replaced by leucoxene) are determined by MS-46 electron probe microanalyzer and MA-1 lazer microanalyzer. Uranium distribution in leucoxene is studied by the method of fragmentary radiography. Leucoxene pseudomorphoses at a high oxygen potential are capable of giving into solution Uranium previously sorbed by leucoxene. This fact should be taken into account when determining source of metal of hydrogenous deposits

Indústria mineral

Directory of Open Access Journals (Sweden)

Iran F. Machado

1998-08-01

Full Text Available A INDÚSTRIA mineral brasileira é analisada, de modo sucinto, face aos desafios impostos pela globalização contemporânea. As mudanças profundas ocorridas no contexto internacional na última década, abrangendo as esferas política, econômica, social e institucional, exigem uma reflexão aprofundada sobre o papel a ser desempenhado pelo Brasil no comércio internacional de bens minerais. De um lado, as oportunidades de aproveitamento de jazidas de classe internacional, principalmente na Amazônia, são bastante promissoras. Por outro, não se deve ignorar que: a explotação dessas reservas terá de obedecer a critérios de sustentabilidade, seguindo paradigmas já adotados em países desenvolvidos; o Brasil terá de garantir a sua competitividade diante dos seus principais concorrentes (Austrália, CEI, China e Índia. A questão dos minerais estratégicos é também abordada, com ênfase nas preocupações demonstradas pelo Departamento de Estado dos EUA. Finalmente, são alinhados três cenários possíveis para o desempenho futuro da mineração brasileira, instando-se o governo a dedicar maior atenção ao destino do nosso subsolo.THE MINERAL industry of Brazil is briefly analysed vis-à-vis the challenges imposed by the cruenta globalization process. The profound changes that occurred in the international framework during the last decade, encompassing the political, economic, social, and institutional structures, demand a thorough appraisal about the role to be played by Brazil in the international market of mineral commodities. On one hand, the opportunities open for world class deposits, mainly in the Amazon, are very promising. On the other hand, it is mandatory to take into account that: the exploitation of these reserves shall comply with sound sustainability criteria, following guidelines already adopted by some developed countries; Brazil will have to demonstrate its competitiveness among the major competitors (Australia

Microbially mediated mineral carbonation

Science.gov (United States)

Power, I. M.; Wilson, S. A.; Dipple, G. M.; Southam, G.

2010-12-01

Mineral carbonation involves silicate dissolution and carbonate precipitation, which are both natural processes that microorganisms are able to mediate in near surface environments (Ferris et al., 1994; Eq. 1). (Ca,Mg)SiO3 + 2H2CO3 + H2O → (Ca,Mg)CO3 + H2O + H4SiO4 + O2 (1) Cyanobacteria are photoautotrophs with cell surface characteristics and metabolic processes involving inorganic carbon that can induce carbonate precipitation. This occurs partly by concentrating cations within their net-negative cell envelope and through the alkalinization of their microenvironment (Thompson & Ferris, 1990). Regions with mafic and ultramafic bedrock, such as near Atlin, British Columbia, Canada, represent the best potential sources of feedstocks for mineral carbonation. The hydromagnesite playas near Atlin are a natural biogeochemical model for the carbonation of magnesium silicate minerals (Power et al., 2009). Field-based studies at Atlin and corroborating laboratory experiments demonstrate the ability of a microbial consortium dominated by filamentous cyanobacteria to induce the precipitation of carbonate minerals. Phototrophic microbes, such as cyanobacteria, have been proposed as a means for producing biodiesel and other value added products because of their efficiency as solar collectors and low requirement for valuable, cultivable land in comparison to crops (Dismukes et al., 2008). Carbonate precipitation and biomass production could be facilitated using specifically designed ponds to collect waters rich in dissolved cations (e.g., Mg2+ and Ca2+), which would allow for evapoconcentration and provide an appropriate environment for growth of cyanobacteria. Microbially mediated carbonate precipitation does not require large quantities of energy or chemicals needed for industrial systems that have been proposed for rapid carbon capture and storage via mineral carbonation (e.g., Lackner et al., 1995). Therefore, this biogeochemical approach may represent a readily

In the pit: a Cape Breton coal miner

Energy Technology Data Exchange (ETDEWEB)

MacKenzie, R.; Caplan, R. (ed.)

2001-07-01

This is an account of the mining life of a coal miner in Nova Scotia from 1951 to 1969. The author was born in New Waterford and worked there, in Numbers 12 and 18 Colliery. Many of his experiences and observations from working at the coal face are described. These include accounts of hauling coal in the pit, driving a diesel, and the coming of mechanization. Mining community life is included as background material. A brief history of 12 Colliery (1908-1975) is included. 12 figs.

Evaluation of mineral kaolinite present in portuguese clays for use in porcelain stoneware; Avaliacao do mineral caulinita presente em argilas portuguesas para uso em gres porcelanato

Energy Technology Data Exchange (ETDEWEB)

Luna da Silveira, G.C. [Instituto Federal do Rio Grande do Norte (IFRN), RN (Brazil); Acchar, W.; Gomes, U.U.; Luna da Silveira, R.V. [Universidade Federal do Rio Grnde do Norte (UFRN), RN (Brazil); Labrincha, A.; Miranda, C.M.P., E-mail: glebacoelli@hotmail.com [Universidade de Aveiro (Portugal)

2016-07-01

Kaolinite is a mineral from the kaolin, product resulting from transformation in depth of alumino silicate mineral type, such as feldspars, plagioclase and feldspars contained in the rocks. Clays are raw materials that have as main characteristic the plasticity property, which gives the product, after applying a certain pressure, a defined shape and an increase in the mechanical resistance when they become from green to dry and then to sintered. Given these characteristics, this paper analyzes the presence of the existing mineral kaolinite in two portuguese clays who are used in the preparation of formulations of porcelain stoneware tiles. The analyzes of the two clays were made by fluorescence x-ray diffraction of x-rays, thermal analysis, particle size and scanning electron microscopy, to better use of this mineral in the formulations. In both clays were found aluminum oxide, as well as mineral quartz, kaolinite and illite. (author)

Radioactive mineral occurences of Colorado and bibliography. [2500 citations in bibliography

Energy Technology Data Exchange (ETDEWEB)

Nelson-Moore, J.L.; Collins, D.B.; Hornbaker, A.L.

1978-01-01

This two-part report provides an essentially complete listing of radioactive occurrences in Colorado, with a comprehensive bibliography and bibliographic cross-indexes. Part 1 lists approximately 3000 known radioactive occurrences with their locations and brief accounts of the geology, mineralogy, radioactivity, host rock, production data, and source of data for each. The occurrences are classified by host rock and plotted on U.S. Geological Survey 1/sup 0/ x 2/sup 0/ topographic quadrangle maps with a special 1 : 100,000-scale base map for the Uravan mineral belt. Part 2 contains the bibliography of approximately 2500 citations on radioactive mineral occurrences in the state, with cross-indexes by county, host rock, and the special categories of ''Front Range,'' ''Colorado Plateau,'' and ''thorium.'' The term ''occurrence'' as used in this report is defined as any site where the concentration of uranium or thorium is at least 0.01% or where the range of radioactivity is greater than twice the background radioactivity. All citations and occurrence data are stored on computer diskettes for easy retrieval, correction, and updating.

Reducing the extraction of minerals

DEFF Research Database (Denmark)

Bouzon, Marina; Govindan, Kannan; Rodriguez, Carlos Manuel Taboada

2015-01-01

Mass consumption and shortening product lifecycles have increased worldwide production. Consequently, more raw materials such as minerals are used, and available landfills are filling up. Companies are urged to effectively incorporate sustainability issues such as End-of-life (EOL) management...... and Reverse Logistics (RL) practices to close the loop and diminish the amount of raw materials used in their production systems. However, implementing RL implies dealing with its barriers. The purpose of this article is to focus on the recovery of EOL products that use mostly raw materials from the mining...

Minerals in thalassaemia major patients: An overview.

Science.gov (United States)

Ozturk, Zeynep; Genc, Gizem Esra; Gumuslu, Saadet

2017-05-01

Thalassaemia major (TM) is a hereditary blood disease characterised by reduced or absent production of beta globin chains. Erythrocyte transfusions are given to raise the haemoglobin level in patients with thalassaemia major. However, transfusions have been related to increased risk of iron overload and tissue damage related to excess iron. Both elevated oxidative stress due to iron overload and increased hemolysis lead to over utilisation of minerals required for antioxidant enzymes activities. Iron chelators have been used to prevent iron overload in thalassaemia major patients, but these chelators have the possibility of removing minerals from the body. Thalassaemia patients are more at risk for mineral deficiency because of increased oxidative stress and iron chelation therapies. Growth and maturational delay, cardiomyopathy, endocrinopathies and osteoporosis are the complications of thalassaemia. Minerals may play a particular role to prevent these complications. In the current review, we provide an overview of minerals including zinc (Zn), copper (Cu), selenium (Se), magnesium (Mg) and calcium (Ca) in thalassaemia major patients. We, also, underline that some complications of thalassaemia can be caused by an increased need for minerals or lack of the minerals. Copyright © 2017 Elsevier GmbH. All rights reserved.

Inclusion of human mineralized exometabolites and fish wastes as a source of higher plant mineral nutrition in BTLSS mass exchange

Science.gov (United States)

Tikhomirova, Natalia; Tikhomirov, Alexander A.; Ushakova, Sofya; Anischenko, Olesya; Trifonov, Sergey V.

Human exometabolites inclusion into an intrasystem mass exchange will allow increasing of a closure level of a biological-technical life support system (BTLSS). Previously at the IBP SB RAS it was shown that human mineralized exometabolites could be incorporated in the BTLSS mass exchange as a mineral nutrition source for higher plants. However, it is not known how that combined use of human mineralized exometabolites and fish wastes in the capacity of nutrient medium, being a part of the BTLSS consumer wastes, will affect the plant productivity. Several wheat vegetations were grown in an uneven-aged conveyor on a neutral substrate. A mixture of human mineralized exometabolites and fish wastes was used as a nutrient solution in the experiment treatment and human mineralized exometabolites were used in the control. Consequently, a high wheat yield in the experiment treatment practically equal to the control yield was obtained. Thus, mineralized fish wastes can be an additional source of macro-and micronutrients for plants, and use of such wastes for the plant mineral nutrition allows increasing of BTLSS closure level.

Quantitative analysis of iodine in thyroidin. I. Methods of ''dry'' and ''wet'' mineralization

International Nuclear Information System (INIS)

Listov, S.A.; Arzamastsev, A.P.

1986-01-01

The relative investigations on the quantitative determination of iodine in thyroidin using different modifications of the ''dry'' and ''wet'' mineralization show that in using these methods the difficulties due to the characteristic features of the object of investigation itself and the mineralization method as a whole must be taken into account. The studies show that the most applicable method for the analysis of thyroidin is the method of ''dry'' mineralization with potassium carbonate. A procedure is proposed for a quantitative determination of iodine in thyroidin

Annual Financial Statements � the Final Products of Accounting

Directory of Open Access Journals (Sweden)

Genu Alexandru Caruntu

2016-07-01

Full Text Available Being a tool and a first class social stake in decision making, accounting language should be understood by all users in the national area, but also across national borders, which requires an internationalization of accounting language through standardization and harmonization. The expansion and multiplication of international economic relations in which commodity and capital markets are expanding at a rapid pace, ignoring national borders, due to globalization process, require that the accounting systems should ensure through the financial statements (balance sheet, profit and loss account, statement of changes in equity, cash flow statement, accounting policies and explanatory notes accounting information comparable between countries.

Leukaemia and lymphoma among Czech uranium miners

International Nuclear Information System (INIS)

Tomasek, L.; Malatova, I.

2006-01-01

Leukaemia is one of the most sensitive cancers in relation to ionizing radiation. It is surprising that in studies of uranium miners, no risk of leukaemia in relation to cumulated radon exposure was observed (Darby et al, 1995). However, when the risk among Czech uranium miners was analyzed in dependence on duration of exposure, the trend was significant. These results were based on 10 cases (Tomasek, 1993). Since then the original cohort of 4320 miners has been extended by another cohort, now including nearly 10 000 uranium miners and the follow-up is longer by 10 years. The present report aims to analyze the risk of haemopoietic cancers in the Czech cohort accounting for both external and internal doses, similarly as reported by Jacobi and Roth (1995), and using available data on metal content and airborne particulates for dose estimates.The present results of follow-up show that increased risk of leukaemia among uranium miners is significantly associated with cumulated equivalent red bone marrow doses which is dominated by exposures to long lived alpha radionuclides in airborne particulates. The increased mortality is mainly observed decades after exposure and is consistent with estimated internal dose to red bone marrow. The estimated risk coefficient for leukaemia is consistent with results from other studies, however, further studies are needed to reduce uncertainty in the risk estimates. (N.C.)

Leukaemia and lymphoma among Czech uranium miners

Energy Technology Data Exchange (ETDEWEB)

Tomasek, L.; Malatova, I. [National Radiation Protection Institute, Prague (Czech Republic)

2006-07-01

Leukaemia is one of the most sensitive cancers in relation to ionizing radiation. It is surprising that in studies of uranium miners, no risk of leukaemia in relation to cumulated radon exposure was observed (Darby et al, 1995). However, when the risk among Czech uranium miners was analyzed in dependence on duration of exposure, the trend was significant. These results were based on 10 cases (Tomasek, 1993). Since then the original cohort of 4320 miners has been extended by another cohort, now including nearly 10 000 uranium miners and the follow-up is longer by 10 years. The present report aims to analyze the risk of haemopoietic cancers in the Czech cohort accounting for both external and internal doses, similarly as reported by Jacobi and Roth (1995), and using available data on metal content and airborne particulates for dose estimates.The present results of follow-up show that increased risk of leukaemia among uranium miners is significantly associated with cumulated equivalent red bone marrow doses which is dominated by exposures to long lived alpha radionuclides in airborne particulates. The increased mortality is mainly observed decades after exposure and is consistent with estimated internal dose to red bone marrow. The estimated risk coefficient for leukaemia is consistent with results from other studies, however, further studies are needed to reduce uncertainty in the risk estimates. (N.C.)

Mineral CO2 sequestration in alkaline solid residues

International Nuclear Information System (INIS)

Huijgen, W.J.J.; Comans, R.N.J.; Witkamp, G.J.

2004-12-01

Mineral carbonation is a promising sequestration route for the permanent and safe storage of carbon dioxide. In addition to calcium- or magnesium-containing primary minerals, suitable alkaline solid residues can be used as feedstock. The use of alkaline residues has several advantages, such as their availability close to CO2 sources and their higher reactivity for carbonation than primary minerals. In addition, the environmental quality of residues can potentially be improved by carbonation. In this study, key factors of the mineral CO2 sequestration process are identified, their influence on the carbonation process is examined, and environmental properties of the reaction products with regard to their possible beneficial utilization are investigated. The use of alkaline solid residues forms a potentially attractive alternative for the first mineral sequestration plants

Deposition and benthic mineralization of organic carbon: A seasonal study from Faroe Islands

Science.gov (United States)

á Norði, Gunnvør; Glud, Ronnie N.; Simonsen, Knud; Gaard, Eilif

2018-01-01

Seasonal variations in sedimentation and benthic mineralization of organic carbon (OC) were investigated in a Faroese fjord. Deposited particulate organic carbon (POC) was mainly of marine origin, with terrestrial material only accounting for rates were associated to the spring bloom. The dynamics in the benthic solute exchange were governed by stratification that isolated the bottom water during summer and intensified sediment resuspension during winter. The POC export from the euphotic zone could not sustain the benthic mineralization rate (10.8 mol C m- 2 yr- 1) and the calculated burial rate (9.8 mol C m- 2 yr- 1) of organic material in the central basin. This indicated considerable focusing of material in the central part of the fjord. This was supported by the fact that the measured benthic mineralization rate - in contrast to most investigations - actually increased with increasing water depth. In August, when mineralization was at its maximum, the dissolved inorganic carbon (DIC) release from the sediment increased by 2.2 mmol m- 2 d- 1 for every m increase in water depth at 30-60 m depth. Due to sediment focusing, the OC burial in the deepest part of the fjord was 9.8 mol C m- 2 yr- 1. This was 2.4 times higher than the average OC burial in the fjord, estimated from the total sedimentation, and benthic mineralization accounting for the water depth related changes in activity. The study in Kaldbaksfjørður underscore that fjords are important sites for long time OC burial, but emphasize the need for accounting for spatial variations when extrapolating results from a single or few stations to the scale of the entire fjord.

MitoMiner: a data warehouse for mitochondrial proteomics data.

Science.gov (United States)

Smith, Anthony C; Blackshaw, James A; Robinson, Alan J

2012-01-01

MitoMiner (http://mitominer.mrc-mbu.cam.ac.uk/) is a data warehouse for the storage and analysis of mitochondrial proteomics data gathered from publications of mass spectrometry and green fluorescent protein tagging studies. In MitoMiner, these data are integrated with data from UniProt, Gene Ontology, Online Mendelian Inheritance in Man, HomoloGene, Kyoto Encyclopaedia of Genes and Genomes and PubMed. The latest release of MitoMiner stores proteomics data sets from 46 studies covering 11 different species from eumetazoa, viridiplantae, fungi and protista. MitoMiner is implemented by using the open source InterMine data warehouse system, which provides a user interface allowing users to upload data for analysis, personal accounts to store queries and results and enables queries of any data in the data model. MitoMiner also provides lists of proteins for use in analyses, including the new MitoMiner mitochondrial proteome reference sets that specify proteins with substantial experimental evidence for mitochondrial localization. As further mitochondrial proteomics data sets from normal and diseased tissue are published, MitoMiner can be used to characterize the variability of the mitochondrial proteome between tissues and investigate how changes in the proteome may contribute to mitochondrial dysfunction and mitochondrial-associated diseases such as cancer, neurodegenerative diseases, obesity, diabetes, heart failure and the ageing process.

Interconnections between the depletion of minerals and fuels: The case of copper production in the United States

International Nuclear Information System (INIS)

Cleveland, C.J.; Ruth, M.

1996-01-01

Analyses of the relationship between natural resources and economic development frequently neglect the interdependency between the depletion of one resource and the depletion of other resources. Of particular interest is how energy resource extraction is affected by the depletion of nonfuel minerals due to the important role of energy in upgrading minerals to a useful state. Although this relationship has been described in theoretical terms, there is little detailed empirical support. To quantify the relationship between the depletion of mineral and fuel resources, the authors develop a dynamic model that is based on physical, technological, and economic data. The analysis quantifies the relationship between the depletion of copper in the US and the depletion of fossil fuel and uranium energy resources stimulated by the increase in demand for refined copper that is forecast for the next 50 years. The model calculates the increase in the energy cost of extracting energy due to the depletion of copper. The results of the model indicate that this feedback is significant. The energy cost of producing a refined ton of copper increases 23% over the 50-year simulation period due to the diminution in ore grade and diminishing returns to technical change. The increase in the energy cost for copper increases the production of fossil and uranium fuels, which diminishes their quality and increases their energy cost

Degradation of the azo dye Acid Red 1 by anodic oxidation and indirect electrochemical processes based on Fenton's reaction chemistry. Relationship between decolorization, mineralization and products

International Nuclear Information System (INIS)

Florenza, Xavier; Solano, Aline Maria Sales; Centellas, Francesc; Martínez-Huitle, Carlos Alberto

2014-01-01

Highlights: • Degradation of Acid Red 1 by anodic oxidation, electro-Fenton and photoelectro-Fenton • Quicker and similar decolorization by electro-Fenton and photoelectro-Fenton due to oxidation with ● OH in the bulk • Almost total mineralization by photoelectro-Fenton with Pt or BDD due to fast photolysis of products by UVA light • Detection of 11 aromatic products, 15 hydroxylated compounds, 13 desulfonated derivatives and 7 carboxylic acids • Release of NH 4 + , NO 3 − and SO 4 2− ions, and generation of persistent N-products of low molecular mass - Abstract: Solutions of 236 mg dm −3 Acid Red 1 (AR1), an azo dye widely used in textile dying industries, at pH 3.0 have been comparatively treated by anodic oxidation with electrogenerated H 2 O 2 (AO-H 2 O 2 ), electro-Fenton (EF) and photoelectro-Fenton (PEF) at constant current density (j). Assays were performed with a stirred tank reactor equipped with a Pt or boron-doped diamond (BDD) anode and an air-diffusion cathode for H 2 O 2 generation from O 2 reduction. The main oxidizing agents were hydroxyl radicals produced at the anode from water oxidation in all methods and in the bulk from Fenton's reaction between generated H 2 O 2 and 0.5 mmol dm −3 Fe 2+ in EF and PEF. For each anode, higher oxidation power was found in the sequence AO-H 2 O 2 < EF < PEF. The oxidation ability of the BDD anode was always superior to that of Pt. Faster and similar decolorization efficiency was achieved in EF and PEF owing to the quicker destruction of aromatics with hydroxyl radicals produced in the bulk. The PEF process with BDD was the most potent method yielding almost total mineralization due to the additional rapid photolysis of recalcitrant intermediates like Fe(III)-carboxylate complexes under UVA irradiation. The increase in j always enhanced the decolorization and mineralization processes because of the greater production of hydroxyl radicals, but decreases the mineralization current efficiency

77 FR 6580 - Agency Information Collection Activities: Comment Request for the Industrial Minerals Surveys (40...

Science.gov (United States)

2012-02-08

... Collection Activities: Comment Request for the Industrial Minerals Surveys (40 Forms) AGENCY: U.S. Geological... forms to supply the USGS with domestic production and consumption data of industrial mineral commodities... Minerals Yearbook, monthly Mineral Industry Surveys, annual Mineral Commodity Summaries, and special...

Ilmenite Mineral's Recovery from Beach Sand Tailings

International Nuclear Information System (INIS)

Mulaba-Bafubiandi, Antoine F.; Mukendi-Ngalula, David; Waanders, Frans B.

2002-01-01

The mineral ilmenite is the major source of rutile for industrial use and is of interest to paint and fertiliser industries. Enormous unutilised tailing dams lie on the eastern coast of the South Africa. Although covered by a simulation of the original indigenous vegetation, these tailings are still ilmenite bearing and of economic value. Tailings emanating from beach sand mineral slimes dams of the Kwazulu-Natal area (South Africa) have been processed. Screening, flotation, spiral concentration and magnetic separation methods were used either separately or successively. The present work sheds light on alternative routes for the extraction of the ilmenite, from these tailings. It moreover points out the usefulness of the Moessbauer spectroscopy in the mineral processing product monitoring. Tailings from the beach sands were used in the present study after the economic industrial minerals zirconia, ilmenite and rutile had been extracted in previous mining operations. About 61% natural ilmenite recovery was observed in the flotation concentrate of a Humphrey Spiral concentrate while a 62% recovery of hematite was found in the flotation tailings. The combination of screening, spiral concentration and magnetic separation, and flotation yielded a product with the highest ilmenite and hematite concentration being 71% and 19%, respectively. A natural ilmenite mineral, containing 87% ilmenite and 13% hematite, could be produced and extracted from the tailings of the flotation process, collected subsequently to the spiral concentration and the initial screening.

A study on the mineral elements available in aquaponics, their impact on lettuce productivity and the potential improvement of their availability.

OpenAIRE

Delaide, Boris

2017-01-01

Aquaponics is an integrated farming concept that combines fish and hydroponic plant production in a recirculating water system. This innovative technique has the potential to reduce the impact of fish and plant production on the environment by namely closing the nutrient loop. Indeed, the nutrients leaving the fish part are used to grow hydroponic plants. This thesis focused on the mineral elements available in aquaponics to grow plants. The thesis started by deepening the aquaponic conce...

Pretreatment process for mineral analysis in FFH using INAA-method and evaluation of mineral intakes

International Nuclear Information System (INIS)

Lee, Ok Hee; Youn, Kyung Jin; Lee, Ji Bum; Kim, Mi Jin

2010-05-01

This study were aimed to set up the pre-treatment process for FFH and analyse Pretreatment processes for the analysis of food mineral contents by INAA were established according to FFH state using freeze-drying and homogenization. The Se contents showed higher precision with INAA-method than ICP-method. The content of Ca, Na, Mg, Fe, Zn, Cu, Mn, Cr, Co in FFH measured using INAA-method showed that the mineral contents in the amount of recommended intakes by manufacturer were not significantly different according to FFH type. The average Ca contents was the highest in Yousanguns > nutritional supplement> glucosamines. The average K content of FFH with one serving size were the highest in glucosamines>aloes> nutritional supplements. I content among FFH was the highest in nutritional supplements. The average Mg contents were highest in Chlorella-Spirurina and Aloes. The average Cu content of FFH was the highest in Yeasts. The contents of Fe, Zn and Se were the highest in nutritional supplements. The mineral contents in recommended intake amounts by manufacturer were over the maximum contents regulated by Korean FDA in some imported FFH products. their mineral contents of FFH using NAA-method and to assess the mineral intakes by FFH

Pretreatment process for mineral analysis in FFH using INAA-method and evaluation of mineral intakes

Energy Technology Data Exchange (ETDEWEB)

Lee, Ok Hee; Youn, Kyung Jin; Lee, Ji Bum; Kim, Mi Jin [Yongin University, Yongin (Korea, Republic of)

2010-05-15

This study were aimed to set up the pre-treatment process for FFH and analyse Pretreatment processes for the analysis of food mineral contents by INAA were established according to FFH state using freeze-drying and homogenization. The Se contents showed higher precision with INAA-method than ICP-method. The content of Ca, Na, Mg, Fe, Zn, Cu, Mn, Cr, Co in FFH measured using INAA-method showed that the mineral contents in the amount of recommended intakes by manufacturer were not significantly different according to FFH type. The average Ca contents was the highest in Yousanguns > nutritional supplement> glucosamines. The average K content of FFH with one serving size were the highest in glucosamines>aloes> nutritional supplements. I content among FFH was the highest in nutritional supplements. The average Mg contents were highest in Chlorella-Spirurina and Aloes. The average Cu content of FFH was the highest in Yeasts. The contents of Fe, Zn and Se were the highest in nutritional supplements. The mineral contents in recommended intake amounts by manufacturer were over the maximum contents regulated by Korean FDA in some imported FFH products. their mineral contents of FFH using NAA-method and to assess the mineral intakes by FFH

INNOVATIVE TECHNOLOGICAL SOLUTIONS IN CREATING FUNCTIONAL PRODUCTS POWER

Directory of Open Access Journals (Sweden)

I. V. Sergienko

2015-01-01

Full Text Available The article deals with a problem of functional products creation for consumers feeling need in proteins, irreplaceable amino acids, vitamins, mineral substances, food fibers, polynonsaturated fat acids. One of the possible ways to improve human nutrition is using non-traditional cultures for bread making technology containing significant amounts of fibrous substances, easily digestible protein, vitamins, unsaturated fatty acids and minerals. Taking into account the Nutrition Science requirements an expediency of the most full functional ingredients complex entering into bakery products prescription structure is proved. Replacement of the first grade wheat flour by the offered prescription composition allows to slow down a bread aging, to increase periods of products storage and to improve their physical and chemical indicators on the specific volume and porosity. The bakery products "Svyatogor" at the use of 100 g of a product allow to cover daily need in protein for 38,9%, in carbohydrates – for 3,4%, fat – for 9,2%. The power value of "Svyatogor" is 897 kJ, in control 959. Biological value, % 82,7 against 53,1 in control. Thanks to it the digestibility of bread protein (in vitro method of “Svyatogor” is higher. Thanks to unique properties of the compounding components “Svyatogor” gets functional properties by full-fledged protein increasing and its best comprehensibility (in vitro, advanced structure according to the content of vitamins, mineral substances, their balanced structure and can be recommended for mass consumption and prevention of osteoporosis, atherosclerosis, anemia, for children food, pregnant women and the feeding women.

Characteristics of mineral nutrition of plants in the bio-technical life support system with human wastes included in mass exchange

Science.gov (United States)

Tikhomirova, Natalia; Ushakova, Sofya; Kalacheva, Galina; Tikhomirov, Alexander

2016-09-01

The study addresses the effectiveness of using ion exchange substrates (IES) to optimize mineral nutrition of plants grown in the nutrient solutions containing oxidized human wastes for application in bio-technical life support systems. The study shows that the addition of IES to the root-inhabited substrate is favorable for the growth of wheat vegetative organs but causes a decrease in the grain yield. By contrast, the addition of IES to the nutrient solution does not influence the growth of vegetative organs but favors normal development of wheat reproductive organs. Thus, to choose the proper method of adjusting the solution with IES, one should take into account specific parameters of plant growth and development and the possibility of multiple recycling of IES based on the liquid products of mineralization of human wastes.

Mineral carbonation - possibilities in and ex-situ, evaluation and experiments in laboratory. Final report

International Nuclear Information System (INIS)

Bodenan, F.; Bailly, L.; Piantone, P.; Seron, A.; Touze, S.

2006-01-01

This report proposes a state of the art of the knowledge and a synthesis of the studies realized at the BRGM since many years, especially in the following domains: the possibilities of the natural minerals and alkaline wastes for the CO 2 sequestration under mineral form, a accounting analysis of the ex-situ processes called direct and indirect, the design of experimental bench scale to study the mineral carbonation at ambient conditions and at high pressure and temperature. (A.L.B.)

Significance of saturation index of certain clay minerals in shallow ...

Indian Academy of Sciences (India)

Significance of saturation index of certain clay minerals in shallow ... The value of ionic activity product (IAP) for a mineral ... where γi is the activity coefficient of ionic species ...... Domenico P A and Schwartz W 1990 Physical and Chemical.

Marine minerals: The Indian perspective

Digital Repository Service at National Institute of Oceanography (India)

Gujar, A.R.; Nath, B.N.; Banerjee, R.

the Konkan Coast, Maharashtra. The future demand for economic minerals and metals for the year 2000 vis-a-vis the production of material in the last twelve years has been calculated, and in light of the above, the importance and chances of offshore...

Minerals

Science.gov (United States)

Minerals are important for your body to stay healthy. Your body uses minerals for many different jobs, including keeping your bones, muscles, heart, and brain working properly. Minerals are also important for making enzymes and hormones. ...

Minerals from Macedonia: XV. Sivec mineral assemble

International Nuclear Information System (INIS)

Boev, Blazho; Jovanovski, Gligor; Makreski, Petre; Bermanec, Vladimir

2005-01-01

The paper presents investigations carried out on the collected minerals from the Sivec deposit. It is situated in the vicinity of the town of Prilep, representing a rare occurrence of sugary white dolomite marbles. The application of suitable methods of exploitation of decorative-dimension stones makes possible to obtain large amounts of commercial blocks well known in the world. Despite the existence of dolomite marbles, a series of exotic minerals are typical in Sivec mineralization. Among them, the most significant are: calcite, fluorite, rutile, phlogopite, corundum, diaspore, almandine, kosmatite (clintonite or margarite), clinochlore, muscovite, quartz, pyrite, tourmaline and zoisite. An attempt to identify ten collected minerals using the FT IR spectroscopy is performed. The identification of the minerals was based on the comparison of the infrared spectra of our specimens with the corresponding literature data for the mineral species originating all over the world. The coloured pictures of all studied silicate minerals are presented as well. (Author)

Headspace analysis gas-phase infrared spectroscopy: a study of xanthate decomposition on mineral surfaces

Science.gov (United States)

Vreugdenhil, Andrew J.; Brienne, Stephane H. R.; Markwell, Ross D.; Butler, Ian S.; Finch, James A.

1997-03-01

The O-ethyldithiocarbonate (ethyl xanthate, CH 3CH 2OCS -2) anion is a widely used reagent in mineral processing for the separation of sulphide minerals by froth flotation. Ethyl xanthate interacts with mineral powders to produce a hydrophobic layer on the mineral surface. A novel infrared technique, headspace analysis gas-phase infrared spectroscopy (HAGIS) has been used to study the in situ thermal decomposition products of ethyl xanthate on mineral surfaces. These products include CS 2, COS, CO 2, CH 4, SO 2, and higher molecular weight alkyl-containing species. Decomposition pathways have been proposed with some information determined from 2H- and 13C-isotope labelling experiments.

Calcium Bioavailability from Mineral Waters with Different Mineralization in Comparison to Milk and a Supplement.

Science.gov (United States)

Greupner, Theresa; Schneider, Inga; Hahn, Andreas

2017-07-01

The aim of the present study was to compare the bioavailability of calcium from 3 mineral waters with different concentrations of minerals with that of milk and a calcium supplement. A single-center, randomized controlled trial with a crossover design with 21 healthy men and women was conducted at the Institute of Food Science and Human Nutrition, Leibniz University Hannover. The participants consumed the 5 test products providing 300 mg of calcium each on 5 examination days with 1-week wash-out phases in between. Primary outcome variables were the area under the curve of serum calcium levels for 10-hour (AUC 0-10h ) and 24-hour urinary calcium excretion. In all groups, no significant differences in the AUC 0-10h of serum calcium levels as well as in the 24-hour urinary calcium excretion were observed. Likewise, mean changes in serum phosphate and urinary phosphate, as well as serum parathormone, showed no differences between the groups. Given an equivalent bioavailability of calcium in all test products, neither a high concentration of SO 4 2- or of HCO 3 influenced the bioavailability of calcium. Accordingly, the use of mineral water with high concentrations of calcium constitutes a calorie-free calcium source that can improve calcium supply.

Accounting assessment

Directory of Open Access Journals (Sweden)

Kafka S.М.

2017-03-01

Full Text Available The proper evaluation of accounting objects influences essentially upon the reliability of assessing the financial situation of a company. Thus, the problem in accounting estimate is quite relevant. The works of home and foreign scholars on the issues of assessment of accounting objects, regulatory and legal acts of Ukraine controlling the accounting and compiling financial reporting are a methodological basis for the research. The author uses the theoretical methods of cognition (abstraction and generalization, analysis and synthesis, induction and deduction and other methods producing conceptual knowledge for the synthesis of theoretical and methodological principles in the evaluation of assets accounting, liabilities and equity. The tabular presentation and information comparison methods are used for analytical researches. The article considers the modern approaches to the issue of evaluation of accounting objects and financial statements items. The expedience to keep records under historical value is proved and the articles of financial statements are to be presented according to the evaluation on the reporting date. In connection with the evaluation the depreciation of fixed assets is considered as a process of systematic return into circulation of the before advanced funds on the purchase (production, improvement of fixed assets and intangible assets by means of including the amount of wear in production costs. Therefore it is proposed to amortize only the actual costs incurred, i.e. not to depreciate the fixed assets received free of charge and surplus valuation of different kinds.

Clays as mineral dust aerosol: An integrated approach to studying climate, atmospheric chemistry, and biogeochemical effects of atmospheric clay minerals in an undergraduate research laboratory

Science.gov (United States)

Hatch, C. D.; Crane, C. C.; Harris, K. J.; Thompson, C. E.; Miles, M. K.; Weingold, R. M.; Bucuti, T.

2011-12-01

Entrained mineral dust aerosol accounts for 45% of the global annual atmospheric aerosol load and can have a significant influence on important environmental issues, including climate, atmospheric chemistry, cloud formation, biogeochemical processes, visibility, and human health. 70% of all mineral aerosol mass originating from Africa consists of layered aluminosilicates, including illite, kaolinite, and montmorillonite clays. Clay minerals are a largely neglected component of mineral aerosol, yet they have unique physiochemical properties, including a high reactive surface area, large cation exchange capacities, small particle sizes, and a relatively large capacity to take up adsorbed water, resulting in expansion of clay layers (and a larger reactive surface area for heterogeneous interactions) in some cases. An integrated laboratory research approach has been implemented at Hendrix College, a Primarily Undergraduate Institution, in which undergraduate students are involved in independent and interdisciplinary research projects that relate the chemical aging processes (heterogeneous chemistry) of clay minerals as a major component of mineral aerosol to their effects on climate (water adsorption), atmospheric chemistry (trace gas uptake), and biogeochemistry (iron dissolution and phytoplankton biomarker studies). Preliminary results and future directions will be reported.

Fabrication of Mineralized Collagen from Bovine Waste Materials by Hydrothermal Method as Promised Biomaterials

DEFF Research Database (Denmark)

Sheikh, Faheem A.; Kanjwal, Muzafar Ahmed; Macossay, Javier

2011-01-01

In the present study, we aimed to produce mineralized-collagen by hydrothermal process. A simple method not depending on additional foreign chemicals has been employed to isolate the mineralized-collagen fibers from bovine waste. The process of extraction involves the use of hydrothermal method...... mineral content in the individual fibers. The X-ray diffraction showed the crystalline feature of the obtained nano-compounds. The thermo gravimetric analysis was used to differentiate between the collagen and mineral parts of obtained product. Overall, the results generously indicated production of well...

Accounting for cranial vault growth in experimental design.

Science.gov (United States)

Power, Stephanie M; Matic, Damir B; Holdsworth, David W

2014-05-01

Earlier studies have not accounted for continued growth when using the rat calvarial defect model to evaluate bone healing in vivo. The purpose of this study was: 1) to calculate rat cranial vault growth over time; and 2) to determine the effects of accounting for growth on defect healing. Bilateral parietal defects were created in 10 adult Wistar rats. Serial microscopic computerized tomography scans were performed. Bone mineral content (BMC) measured according to standard technique and repeated accounting for cranial growth over time was compared with the use of parametric and nonparametric tests. Cranial vault growth continued through 22 weeks of age, increasing 7.5% in width and 9.1% in length, and calvarial defects expanded proportionately. BMC was greater within defects accounting for growth 2-12 weeks postoperatively (P accounting for cranial growth given advances in serial imaging techniques. Crown Copyright © 2014. Published by Mosby, Inc. All rights reserved.

Lagoa Real design - Mineral engineering

International Nuclear Information System (INIS)

Forman, J.M.A.

1982-01-01

This paper presents the works realized, in course and to realize of Lagoa Real Design, including the works for implantation of Mineral-Industrial complex with the production capacity of 1.000 ton of U sub(3) O sub(8) per year from 1988. (author)

Flotation and screening recovery of titanium minerals from a monazite mineral sands circuit

International Nuclear Information System (INIS)

Bruckard, W.J.; Heyes, G.W.; Guy, P.J.

2001-01-01

Investigations were undertaken to assess the suitability of CSIRO flotation methods for improving the efficiency of separation of heavy minerals in the monazite circuit at the Westralian Sands Limited operations at Capel, Western Australia. Flotation work was conducted on two plant samples. The first was a high-titanium product containing considerable amounts of zircon and silica as quartz and aluminosilicates, and the second was a low monazite/zircon material containing high levels of silica. A three-stage process including reverse flotation was developed to treat the first sample. In this process monazite, zircon, quartz, and aluminosilicates were selectively concentrated by flotation and screening to produce a titanium-rich product. In the first stage, an acid amine float, monazite, zircon, and some non-zircon silica were recovered and in the second stage, an alkaline amine float using a fluoride activator, more quartz and staurolite were floated. The titanium minerals were thus concentrated in the unfloated fraction. In the third stage, the titanium-rich flotation tail was screened at 250 μm to remove the remaining coarse aluminosilicates. In a single pass, the three-stage process yielded a TiO 2 recovery of 64.0 per cent with the titanium-rich product assaying 70.3 per cent TiO 2

Decolorization and mineralization of Allura Red AC aqueous solutions by electrochemical advanced oxidation processes

International Nuclear Information System (INIS)

Thiam, Abdoulaye; Sirés, Ignasi; Garrido, José A.; Rodríguez, Rosa M.; Brillas, Enric

2015-01-01

Highlights: • Quicker degradation of Allura Red AC in the order EO-H 2 O 2 < EF < PEF with Pt or BDD anode. • Almost total mineralization achieved by the most powerful PEF process with BDD. • Similar decolorization and mineralization rate in SO 4 2− , ClO 4 − and NO 3 − media. • In Cl − medium, only slightly larger decolorization rate but strong inhibition of mineralization. • Identification of aromatic products, carboxylic acids and released NH 4 + , NO 3 − and SO 4 2− ions. - Abstract: The decolorization and mineralization of solutions containing 230 mg L −1 of the food azo dye Allura Red AC at pH 3.0 have been studied upon treatment by electrochemical oxidation with electrogenerated H 2 O 2 (EO-H 2 O 2 ), electro-Fenton (EF) and photoelectro-Fenton (PEF). Experiments were performed with a stirred tank reactor containing a boron-doped diamond (BDD) or Pt anode and an air-diffusion cathode to generate H 2 O 2 . The main oxidants were hydroxyl radicals formed at the anode surface from water oxidation and in the bulk from Fenton’s reaction between H 2 O 2 and added Fe 2+ . The oxidation ability increased in the sequence EO-H 2 O 2 < EF < PEF and faster degradation was always obtained using BDD. PEF process with BDD yielded almost total mineralization following similar trends in SO 4 2− , ClO 4 − and NO 3 − media, whereas in Cl − medium, mineralization was inhibited by the formation of recalcitrant chloroderivatives. GC–MS analysis confirmed the cleavage of the −N=N− bond with formation of two main aromatics in SO 4 2− medium and three chloroaromatics in Cl − solutions. The effective oxidation of final oxalic and oxamic acids by BDD along with the photolysis of Fe(III)-oxalate species by UVA light accounted for the superiority of PEF with BDD. NH 4 + , NO 3 − and SO 4 2− ions were released during the mineralization

Some implications of changing patterns of mineral consumption

Science.gov (United States)

Menzie, W. David; DeYoung,, John H.; Steblez, Walter G.

2003-01-01

DeYoung and Menzie (1999) examined the relations among population, Gross Domestic Product, and mineral consumption (aluminum, cement, copper, and salt) for Japan, Korea, and the United States between 1965 and 1995. They noted the extremely rapid growth of consumption in Korea between 1975 and 1995. Concomitantly, Korea's population growth rate declined. This paper extends that earlier work by examining patterns of consumption of these same commodities in the twenty most populous countries for the period 1970 through 1995. Developed countries, such as France, Germany, Japan, the United Kingdom, and the United States, show patterns of consumption that are stable (cement, copper, and salt) or grow slowly (aluminum). Some developing countries, including China, Thailand, and Turkey, show more rapid growth of consumption, especially of cement, copper, and aluminum. These changing patterns of mineral consumption in developing countries have important implications -- if they continue, there could be major increases in world mineral consumption and major increases in environmental residuals from mineral production and use. If China reaches the level of consumption of copper of developed countries, world consumption could reach levels more than twice that of 1995 (10.5 million tons).

On some investigation features of sorption of flotation reagents labelled by soft β-emitters on mineral surface

International Nuclear Information System (INIS)

Korobochkin, V.P.; Gladyshev, V.P.; Latypova, O.A.

1983-01-01

A correction for self-absorption, taking into account concrete dimensions of mineral grain during sorption of flotation reagents on mineral surface is deduced. On the basis of the regularity obtained problems of the sensitivity of the determination method of reagent activity sorbed by minerals which are labelled by radioactive isotopes are considered. Improved technique is described and statistical analysis of the experimental data obtained is carried out

[The main directions of improving the system of state accounting and control of radioactive substances and radioactive waste products].

Science.gov (United States)

2012-01-01

This paper describes a modification of the basic directions of state accounting and control of radioactive substances and radioactive waste products, whose implementation will significantly improve the efficiency of its operation at the regional level. Selected areas are designed to improve accounting and control system for the submission of the enterprises established by the reporting forms, the quality of the information contained in them, as well as structures of information and process for collecting, analyzing and data processing concerning radioactive substances and waste products.

Uptake of mineral elements by plants

International Nuclear Information System (INIS)

Ven Babu, P.

2008-01-01

Scientific investigations into the mineral nutrition of plants, date back to the late 17th century and vast amount of literature has accumulated since then, encompassing the occurrence of mineral elements, their interaction in soil and within plants, kinetics of their uptake, role in metabolism, toxicity to plants and animals and so on. Despite great advances made in the fields of plant physiology, plant biochemistry and genetic engineering and application of sophisticated analytical and biochemical techniques, many aspects of nutrient uptake by plants, their movement within roots and the long distance transport to shoots remain yet to be fully answered and a combination of hypothesis and assumptions are taken into account, for understanding the phenomena. This write up deals with the subject in a brief and narrative manner, so as to enable the reader to get an insight into the field

Application of minerals residues in the asphalt composition; Aplicacao de residuos minerais na composicao do asfalto

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Roberto Carlos da C.; Seidl, Peter Rudolf [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Correia, Julio Cesar Guedes [Centro de Tecnologia Mineral - CETEM, Rio de Janeiro, RJ (Brazil)

2004-07-01

The performance of asphalt pavements depends mainly on the properties of their constituents: mineral aggregates and asphalt cement. The mineral aggregate represents about 95% in weight of asphalt mixtures having a significant influence on the properties and performance of these mixtures. Asphalt cement (CAP) corresponds to the smaller fraction but it is mainly responsible for adsorption on the mineral aggregates. The objective of this study was to evaluate the interaction between different CAPs with residues from granite saw wills in place of mineral aggregates that run up costs with extraction and processing in asphalt production. This way asphalt production costs as well as the environmental problems that are caused by mineral residue are reduced. Five different asphalt cements, referred to as A, B, C, D and E, and a granite residue were used in this work. The results indicated that the residue strongly absorbs all the CAPs that were studied; particularly CAP A, which is considered the most adequate for the production of asphalt from this residue. Preliminary tests this indicate that asphalt production can use mineral residues instead of mineral aggregates in its composition. (author)

Studies on the preparation of value-added products for industrial minerals

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

This report consists of 2 subjects. 1) Studies on the preparation of value-added products for limestone: This study has investigated to raise to high grade by economical processes with low grade of domestic limestone. We investigated the status of application utilize and related industries with the domestic limestone, and then being consideration with condition selected the adequate sample from Andong, Jungsun and Kumsan area. Magnetic materials were involved in impurities of sample, so magnetic separation method was applied in elimination of the ferro- and para-magnetic materials, such as chlorite, muscovite, quartz, dolomite, magnetite, feldspar and so on. Investigation of flotation was undertaken to eliminate impurities from limestone crude ore and the tests were performed to get a optimum condition adding oleic acid as a promoter, sodium silicate and sodium carbonate as a conditioning agents and MIBC as a frother, while to float the sulfide minerals added amyl xanthate as a promoter, and sulfuric acid as a pH regulator. Selective crushing and classification methods were performed to eliminate impurities depends on the mineral properties and should be the selective crushing methods are very useful at the manufacturing factory of heavy calcium carbonate with the dry milling system. 2) A study on development of value added technology of pyrophyllite and dickite: Pyrophyllite and dickite have being utilized as refractories, ceramics, cement, fiber glass, paper, rubber, paints etc. However, there are not any domestic companies to produce fillers of pyrophyllite and dickite for plastic and rubber. Moreover, several kinds of fillers are imported every year with expensive price for plastic and rubber filler. This study has purpose to develop manufacturing technologies to produce fillers for plastic and rubber of pyrophyllite and dickite. The chemical and mineralogical properties of samples, the optimum grinding condition and device for producing plastic fillers and

Characterization of clay minerals; Caracterizacion de minerales arcillosos

Energy Technology Data Exchange (ETDEWEB)

Diaz N, C.; Olguin, M.T.; Solache R, M.; Alarcon H, T.; Aguilar E, A. [Gerencia de Ciencias Basicas, Direccion de Investigacion Cientifica, Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

2002-07-01

The natural clays are the more abundant minerals on the crust. They are used for making diverse industrial products. Due to the adsorption and ion exchange properties of these, a great interest for developing research directed toward the use of natural clays for the waste water treatment has been aroused. As part of such researches it is very important to carry out previously the characterization of the interest materials. In this work the results of the mineral and elemental chemical composition are presented as well as the morphological characteristics of clay minerals from different regions of the Mexican Republic. (Author)

The review of recent carbonate minerals processing technology

Science.gov (United States)

Solihin

2018-02-01

Carbonate is one of the groups of minerals that can be found in relatively large amount in the earth crust. The common carbonate minerals are calcium carbonate (calcite, aragonite, depending on its crystal structure), magnesium carbonate (magnesite), calcium-magnesium carbonate (dolomite), and barium carbonate (barite). A large amount of calcite can be found in many places in Indonesia such as Padalarang, Sukabumi, and Tasikmalaya (West Java Provence). Dolomite can be found in a large amount in Gresik, Lamongan, and Tuban (East Java Provence). Magnesite is quite rare in Indonesia, and up to the recent years it can only be found in Padamarang Island (South East Sulawesi Provence). The carbonate has been being exploited through open pit mining activity. Traditionally, calcite can be ground to produce material for brick production, be carved to produce craft product, or be roasted to produce lime for many applications such as raw materials for cement, flux for metal smelting, etc. Meanwhile, dolomite has traditionally been used as a raw material to make brick for local buildings and to make fertilizer for coconut oil plant. Carbonate minerals actually consist of important elements needed by modern application. Calcium is one of the elements needed in artificial bone formation, slow release fertilizer synthesis, dielectric material production, etc. Magnesium is an important material in automotive industry to produce the alloy for vehicle main parts. It is also used as alloying element in the production of special steel for special purpose. Magnesium oxide can be used to produce slow release fertilizer, catalyst and any other modern applications. The aim of this review article is to present in brief the recent technology in processing carbonate minerals. This review covers both the technology that has been industrially proven and the technology that is still in research and development stage. One of the industrially proven technologies to process carbonate mineral is

Stop Smoking—Tube-In-Tube Helical System for Flameless Calcination of Minerals

Directory of Open Access Journals (Sweden)

Nils Haneklaus

2017-11-01

Full Text Available Mineral calcination worldwide accounts for some 5–10% of all anthropogenic carbon dioxide (CO2 emissions per year. Roughly half of the CO2 released results from burning fossil fuels for heat generation, while the other half is a product of the calcination reaction itself. Traditionally, the fuel combustion process and the calcination reaction take place together to enhance heat transfer. Systems have been proposed that separate fuel combustion and calcination to allow for the sequestration of pure CO2 from the calcination reaction for later storage/use and capture of the combustion gases. This work presents a new tube-in-tube helical system for the calcination of minerals that can use different heat transfer fluids (HTFs, employed or foreseen in concentrated solar power (CSP plants. The system is labeled ‘flameless’ since the HTF can be heated by other means than burning fossil fuels. If CSP or high-temperature nuclear reactors are used, direct CO2 emissions can be divided in half. The technical feasibility of the system has been accessed with a brief parametric study here. The results suggest that the introduced system is technically feasible given the parameters (total heat transfer coefficients, mass- and volume flows, outer tube friction factors, and –Nusselt numbers that are examined. Further experimental work will be required to better understand the performance of the tube-in-tube helical system for the flameless calcination of minerals.

THE ENVIRONMENTAL IMPACT OF THE DELIVERY OF MINERAL RAW MATERIALS USED FOR BUILDING MATERIALS PRODUCTION TO THE CITY OF ZAGREB AND THE ZAGREB COUNTY

Directory of Open Access Journals (Sweden)

Karolina Novak

2011-12-01

Full Text Available Mineral raw material transport directly affects a product’s unit price and exhaust gases amounts. Transportation length is proportional to raw material price; its low price enables short transportation distances only. Taking into account stone aggregates delivered to Zagreb, the consequence of exploitation fields closure in the Zagreb area, particularly within the Medvednica Nature Park, we tried to answer the question of the impact of transport distances on the greenhouse gas emissions. Certain models will present environmental impact of the stone aggregate transportation and of nearby city quarries. The generally accepted public opinion on the closure of nearby city quarries as the best solution to environmental pollution will have to be reviewed. Mining works are predestined by mineral resources sites and limited by real possibilities and intentions of the community, therefore the experts, i.e. miners, geologists and other geoscientists, should be actively involved in spatial planning. During the years of intensive construction, millions of tons have been delivered from distances up to 100 km. The question arises whether some more rational solutions could be generated by more appropriate spatial planning? (the paper is published in Croatian

On-line measurement and control in sustainable mineral processing and energy production

International Nuclear Information System (INIS)

Sowerby, B.D.

2002-01-01

Sustainable development can be defined as development that 'meets the needs of the present without compromising the ability of future generations to meet their own needs' (WCED, 1987). A sustainable minerals and energy industry will need to achieve a number of related objectives including greater energy efficiency, improved utilisation of ore deposits, improved utilisation of existing plant, improved product quality, reduction of waste material, reduction of pollution levels and improved safety margins. These objectives all relate in varying degrees to the triple bottom line of economic, social and environmental benefits. One critical component in achieving these objectives is to develop and apply improved control systems across the full range of industry applications from mining to processing and utilisation. However process control relies heavily on the availability of suitable on-line process instrumentation to provide the data and feedback necessary for its implementation. There is a lot of truth in the saying 'if you can't measure it you can't control it'. In the past measurement was achieved by manual sampling followed by sample preparation (such as drying, mixing, crushing and dividing) and off-line laboratory analysis. However this procedure is often subject to significant sampling errors and, most importantly, the measurements are too slow for control purposes. By contrast, on-line analysis can provide rapid and accurate measurement in real time thus opening up new possibilities for improved process control. As a result, there has been a rapid increase in the industrial application of on-line analysis instrumentation over the past few decades. The main purpose of this paper is to briefly review some past Australian developments of on-line analysis systems in the mineral and coal industries and to discuss present developments and future trends

Developing quality standards for physical properties of mineral wool plugs

NARCIS (Netherlands)

Blok, C.; Berg, van den C.C.; Winkel, van A.

2014-01-01

The KIWA certification guidelines for mineral wool products contain standards for slabs and blocks. Propagators would like to introduce quality standards for mineral wool plugs as well. Main concerns were effects of too dense plugs on plant growth, and handling problems with too fluffy or broken

Influence of noxious products of blasting in mine air on miners' health

Energy Technology Data Exchange (ETDEWEB)

Zemlyakova, L F; Sukhanov, V V

1979-07-01

Changes in the percentage of carbon monoxide and nitric oxide in mine air as a result of blasting is analyzed as measured in coal mines of the Donbass in coal seams located from 500 m to 1000 m underground. It is stated that 15 minutes after blasting the concentration of carbon monoxide and nitric oxide drops to a permissible level. Fifty minutes after blasting the percentage of nitric oxide in mine air drops to such a level that it can not be detected. Carbon monoxide can be detected until the blasted rocks and coal are removed from the heading. The percentage of nitric oxide in mine air falls with growing depth of workings. The interdependence between state of miners' health and their contact with noxious gases is also analyzed. The analysis shows that miners working where blasting is used are ill more frequently than other miners, and their absence due to illness is longer. (In Russian)

Mineral trioxide aggregate: part 2 - a review of the material aspects.

Science.gov (United States)

Malhotra, Neeraj; Agarwal, Antara; Mala, Kundabala

2013-03-01

The purpose of this two-part series is to review the composition, properties, and products of mineral trioxide aggregate (MTA) materials. PubMed and MedLine electronic databases were used to identify scientific papers from January 1991 to May 2010. Based on the selected inclusion criteria, citations were referenced from the scientific peer-reviewed dental literature. Mineral trioxide aggregate is a refined form of the parent compound, Portland cement (PC), and demonstrates a strong biocompatibility due to the high pH level and the material's ability to form hydroxyapatite. Mineral trioxide aggregate materials provide better microleakage protection than traditional endodontic materials as observed in findings from dye-leakage, fluid-filtration, protein-leakage, and bacterial penetration-leakage studies and has been recognized as a bioactive material. Various MTA commercial products are available, including gray mineral trioxide aggregate (GMTA), white mineral trioxide aggregate (WMTA), and mineral trioxide aggregate-Angelus (AMTA). Although these materials are indicated for various dental uses and applications, long-term in-vivo clinical studies are needed. Part 1 of this article highlighted and discussed the composition and characteristics of the material. Part 2 provides an overview of commercially available MTA materials.

How does accounting for worker productivity affect the measured cost-effectiveness of lumbar discectomy?

Science.gov (United States)

Koenig, Lane; Dall, Timothy M; Gu, Qian; Saavoss, Josh; Schafer, Michael F

2014-04-01

Back pain attributable to lumbar disc herniation is a substantial cause of reduced workplace productivity. Disc herniation surgery is effective in reducing pain and improving function. However, few studies have examined the effects of surgery on worker productivity. We wished to determine the effect of disc herniation surgery on workers' earnings and missed workdays and how accounting for this effect influences the cost-effectiveness of surgery? Regression models were estimated using data from the National Health Interview Survey to assess the effects of lower back pain caused by disc herniation on earnings and missed workdays. The results were incorporated into Markov models to compare societal costs associated with surgical and nonsurgical treatments for privately insured, working patients. Clinical outcomes and utilities were based on results from the Spine Patient Outcomes Research Trial and additional clinical literature. We estimate average annual earnings of $47,619 with surgery and $45,694 with nonsurgical treatment. The increased earnings for patients receiving surgery as compared with nonsurgical treatment is equal to $1925 (95% CI, $1121-$2728). After surgery, we also estimate that workers receiving surgery miss, on average, 3 fewer days per year than if workers had received nonsurgical treatment (95% CI, 2.4-3.7 days). However, these fewer missed work days only partially offset the assumed 20 workdays missed to recover from surgery. More fully accounting for the effects of disc herniation surgery on productivity reduced the cost of surgery per quality-adjusted life year (QALY) from $52,416 to $35,146 using a 4-year time horizon and from $27,359 to $4186 using an 8-year time horizon. According to a sensitivity analysis, the 4-year cost per QALY varies between $27,921 and $49,787 depending on model assumptions. Increased worker earnings resulting from disc herniation surgery may offset the increased direct medical costs associated with surgery. After

Bacterial production, protozoan grazing, and mineralization in stratified Lake Vechten

NARCIS (Netherlands)

Bloem, J.

1989-01-01

The role of heterotrophic nanoflagellates (HNAN, size 2-20 μm) in grazing on bacteria and mineralization of organic matter in stratified Lake Vechten was studied.

Quantitative effects of manipulation and fixation on HNAN were checked. Considerable losses were caused by

The key numbers of the mineral raw materials

International Nuclear Information System (INIS)

Mandil, C.

1996-01-01

Mineral raw materials come from fossil reserves or ores resulting from the geologic and climatic history of the Earth. The access to economic development for 80% of the worldwide population and the high rate of demographic growth (probably 8 billions of inhabitants in 2025) are important factors that can greatly multiply the worldwide consumption of ores. In parallel, environmental concerns and the increasing need for a better equilibrium between wildlife preservation and the supply of economic needs, lead to a more reasonable and mastered use of natural resources. The aim of this book is to shade light and give global elements of thoughts on mineral resources, and for the main of those (about 30 metals and mineral substances), to review the most useful data and references about their production and consumption. For each question, chapters are devoted to the situation of France in its worldwide context. One chapter concerns the uranium ores (reserves, production, prices evolution, consumption, economic flux and companies involved). (J.S.)

Cobalt mineral exploration and supply from 1995 through 2013

Science.gov (United States)

Wilburn, David R.

2011-01-01

The global mining industry has invested a large amount of capital in mineral exploration and development over the past 15 years in an effort to ensure that sufficient resources are available to meet future increases in demand for minerals. Exploration data have been used to identify specific sites where this investment has led to a significant contribution in global mineral supply of cobalt or where a significant increase in cobalt production capacity is anticipated in the next 5 years. This report provides an overview of the cobalt industry, factors affecting mineral supply, and circumstances surrounding the development, or lack thereof, of key mineral properties with the potential to affect mineral supply. Of the 48 sites with an effective production capacity of at least 1,000 metric tons per year of cobalt considered for this study, 3 producing sites underwent significant expansion during the study period, 10 exploration sites commenced production from 1995 through 2008, and 16 sites were expected to begin production by 2013 if planned development schedules are met. Cobalt supply is influenced by economic, environmental, political, and technological factors affecting exploration for and production of copper, nickel, and other metals as well as factors affecting the cobalt industry. Cobalt-rich nickel laterite deposits were discovered and developed in Australia and the South Pacific and improvements in laterite processing technology took place during the 1990s and early in the first decade of the 21st century when mining of copper-cobalt deposits in Congo (Kinshasa) was restricted because of regional conflict and lack of investment in that country's mining sector. There was also increased exploration for and greater importance placed on cobalt as a byproduct of nickel mining in Australia and Canada. The emergence of China as a major refined cobalt producer and consumer since 2007 has changed the pattern of demand for cobalt, particularly from Africa and

Life-cycle based dynamic assessment of mineral wool insulation in a Danish residential building application

DEFF Research Database (Denmark)

Sohn, Joshua L.; Kalbar, Pradip; Banta, Gary T.

2017-01-01

There has been significant change in the way buildings are constructed and the way building energy performance is evaluated. Focus on solely the use phase of a building is beginning to be replaced by a life-cycle based performance assessment. This study assesses the environmental impact trade......-offs between the heat produced to meet a building's space heating load and insulation produced to reduce its space heating load throughout the whole life-cycle of a building. To obtain a more realistic valuation of this tradeoff, a dynamic heat production model, which accounts for political projections...... grid, which is potentially promoted at present in Danish regulation. It is further concluded that improvement of the mineral wool insulation production process could allow for greater levels of environmentally beneficial insulation and would also help in reducing the overall environmental burden from...

Problems of mineral tax computation in the oil and gas sector

Directory of Open Access Journals (Sweden)

Н. Г. Привалов

2017-04-01

Full Text Available The paper demonstrates the role of mineral tax in the overall sum of tax revenues in the budget. Problems of tax computation and payment have been reviewed; taxpayers and taxation basis of the amount of extracted minerals have been clearly defined. Issues of rental content of natural resource taxes are reviewed, as well as problems of right definition of the rental component in the process of mineral tax calculation for liquid and gaseous hydrocarbons.One of important problems in mineral tax calculation is a conflict between two laws – the Subsoil Law and the Tax Code of Russian Federation (26th chapter. There is an ambiguity in the mechanism of calculating amounts of extracted mineral resources – from the positions of the Tax Code and the Subsoil Law. The second problem is in the necessity to amend the mineral tax for oil extraction the same way as it has been done for gas extraction, when characteristics of each field are taken into account.This will provide a basis for correct computation of the natural resource rent for liquid and gaseous hydrocarbons. The paper offers recommendations for Russian authorities on this issue.

Heavy mineral concentration from oil sand tailings

Energy Technology Data Exchange (ETDEWEB)

Chachula, F.; Erasmus, N. [Titanium Corp. Inc., Regina, SK (Canada)

2008-07-01

This presentation described a unique technique to recover heavy minerals contained in the froth treatment tailings produced by oil sand mining extraction operations in Fort McMurray, Alberta. In an effort to process waste material into valuable products, Titanium Corporation is developing technology to recover heavy minerals, primarily zircon, and a portion of bitumen contained in the final stage of bitumen processing. The process technology is being developed to apply to all mined oil sands operations in the Fort McMurray region. In 2004, Titanium Corporation commissioned a pilot research facility at the Saskatchewan Research Council to test dry oil sands tailings. In 2005, a bulk sampling pilot plant was connected to the fresh oil sands tailings pipeline on-site in Fort McMurray, where washed sands containing heavy minerals were processed at a pilot facility. The mineral content in both deposited tailings and fresh pipeline tailings was assessed. Analysis of fresh tailings on a daily basis identified a constant proportion of zircon and higher levels of associated bitumen compared with the material in the deposited tailings. The process flow sheet design was then modified to remove bitumen from the heavy minerals and concentrate the minerals. A newly modified flotation process was shown to be a viable processing route to recover the heavy minerals from froth treatment tailings. 8 refs., 9 tabs., 12 figs.

On dynamics of uranium vein mineralization

International Nuclear Information System (INIS)

Petrosyan, R.V.

1981-01-01

The formation of urnaium vein deposits and the essence of consanguinity of the mineralization and wall metasomatites are considered. The formation of uranium mineralization is analysed from the positions of Korzhinsky D. S. : the formation of metasomatite aureole and associated vein ores take place as a result of the development of one solution flow while the formation of mineral vein associations occurs on the background of contineous filtration of the solution during metasomato is due to a repeated (pulse) half-opening of fractures and their filling with a part of filtrating solution. The analysis of the available information on the example of two different uranium manifestations permits to reveal certain relations both in the character of wall rock alterations and between the metasomatosis and the formation of ore minerals in veins. The conclusion is made that spatial-time correlations of vein formations with wall metasomatites attest that the pulse formation of ores in veinlets occurs on the background and in interrelation with a consecutive precipitation of components in the aureole volume. The analysis of element migration dynamics in wall aureole carried out from the positions of the Korzhinsky hypothesis of the advance wave of acid components that takes into account the interaction of continuous and pulse mechanisms of solution movement permits to avoid contradictions when interpreting the processes of wall rock alterations and vein ore-forming, and permits to make a common scheme of vein ore-genesis [ru

Assessment of critical minerals: Updated application of an early-warning screening methodology

Science.gov (United States)

McCullough, Erin A.; Nassar, Nedal

2017-01-01

Increasing reliance on non-renewable mineral resources reinforces the need for identifying potential supply constraints before they occur. The US National Science and Technology Council recently released a report that outlines a methodology for screening potentially critical minerals based on three indicators: supply risk (R), production growth (G), and market dynamics (M). This early-warning screening was initially applied to 78 minerals across the years 1996 to 2013 and identified a subset of minerals as “potentially critical” based on the geometric average of these indicators—designated as criticality potential (C). In this study, the screening methodology has been updated to include data for 2014, as well as to incorporate revisions and modifications to the data, where applicable. Overall, C declined in 2014 for the majority of minerals examined largely due to decreases in production concentration and price volatility. However, the results vary considerably across minerals, with some minerals, such as gallium, recording increases for all three indicators. In addition to assessing magnitudinal changes, this analysis also examines the significance of the change relative to historical variation for each mineral. For example, although mined nickel’s R declined modestly in 2014 in comparison to that of other minerals, it was by far the largest annual change recorded for mined nickel across all years examined and is attributable to Indonesia’s ban on the export of unprocessed minerals. Based on the 2014 results, 20 minerals with the highest C values have been identified for further study including the rare earths, gallium, germanium, rhodium, tantalum, and tungsten.

Is there a metric for mineral deposit occurrence probabilities?

Science.gov (United States)

Drew, L.J.; Menzie, W.D.

1993-01-01

Traditionally, mineral resource assessments have been used to estimate the physical inventory of critical and strategic mineral commodities that occur in pieces of land and to assess the consequences of supply disruptions of these commodities. More recently, these assessments have been used to estimate the undiscovered mineral wealth in such pieces of land to assess the opportunity cost of using the land for purposes other than mineral production. The field of mineral resource assessment is an interdisciplinary field that draws elements from the disciplines of geology, economic geology (descriptive models), statistics and management science (grade and tonnage models), mineral economics, and operations research (computer simulation models). The purpose of this study is to assert that an occurrenceprobability metric exists that is useful in "filling out" an assessment both for areas in which only a trivial probability exists that a new mining district could be present and for areas where nontrivial probabilities exist for such districts. ?? 1993 Oxford University Press.

Regulation No. 100/2006 Coll. of the Ministry of Health of the Slovak Republic dated as of February 6, 2006 laying down the requirements for natural healing water and natural mineral water, Balneology details of the report, distribution, extent of monitoring and content analysis of natural healing waters and natural mineral waters and their products and requirements for entry to the list of accredited laboratories maintained by the State Commission bathroom

International Nuclear Information System (INIS)

2006-01-01

This Regulation provides: (a) requirements for natural healing water and natural mineral water; (b) requirements for the recognition of natural mineral water; (c) details of balneology report; (d) distribution of natural healing waters and natural mineral water; (e) the extent of tracking of natural healing waters and natural mineral waters and their products; (f) content analysis of natural healing waters and natural mineral waters and their products; (g) registration requirements for accredited laboratories in the list maintained by the State Commission bathroom. This Regulation came into force on March 1, 2006.

Applications of scanning electron microscopy to the study of mineral matter in peat

Energy Technology Data Exchange (ETDEWEB)

Raymond, R. Jr.; Andrejko, M.J.; Bardin, S.W.

1983-01-01

Scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) have been used for in situ analysis of minerals in peats by combining methods for producing oriented microtome sections of peat with methods for critical point drying. The combined technique allows SEM analysis of the inorganic components and their associated botanical constituents, along with petrographic identification of the botanical constituents. In peat deposits with abundant fluvial- or marine-derived minerals, one may use the above technique and/or medium- or low-temperature ashing followed by x-ray diffraction to readily identify the various mineral components. However, in some freshwater environments the scarcity of non-silica minerals makes the above techniques impractical. By separating the inorganic residues from the peat, one can isolate the non-silica mineral matter in the SEM for analysis by EDS. Furthermore, such separation allows SEM analysis of features and textures of both silica and non-silica mineral particles that might otherwise be unidentifiable. Results indicate the occurrence of detritial minerals in both Okefenokee and Snuggedy Swamp peats, the presence of authigenic or diagenetic minerals growing within peats, and dissolution features on freshwater sponge spicules that may account for the absence of spicules in Tertiary lignites.

Expression and Dynamics of Podoplanin in Cultured Osteoblasts with Mechanostress and Mineralization Stimulus.

Science.gov (United States)

Takenawa, Tomohiro; Kanai, Takenori; Kitamura, Tetsuya; Yoshimura, Yoshitaka; Sawa, Yoshihiko; Iida, Junichiro

2018-02-27

This study investigates the significance of the expression and dynamics of podoplanin in mechanostress and mineralization in cultured murine osteoblasts. Podoplanin increased in osteoblasts subjected to straining in non-mineralization medium, suggesting that the mechanostress alone is a podoplanin induction factor. In osteoblasts subjected to vertical elongation straining in the mineralization medium, the mRNA amounts of podoplanin, osteopontin, and osteocalcin were significantly larger than those in cells not subjected to straining, suggesting that mechanostress is the cause of a synergistic effect in the expression of these proteins. In osteoblasts in the mineralization medium, significant increases in osteocalcin mRNA occurred earlier in cells subjected to straining than in the cells not subjected to straining, suggesting that the mechanostress is a critical factor to enhance the expression of osteocalcin. Western blot and ELISA analysis showed increased podoplanin production in osteoblasts with longer durations of straining. There was significantly less mineralization product in osteoblasts with antibodies for podoplanin, osteopontin, and osteocalcin. There was also less osteopontin and osteocalcin produced in osteoblasts with anti-podoplanin. These findings suggest that mechanostress induces the production of podoplanin in osteoblasts and that podoplanin may play a role in mineralization in cooperation with bone-associated proteins.

Hydrothermal Valorization of Steel Slags—Part I: Coupled H2 Production and CO2 Mineral Sequestration

Directory of Open Access Journals (Sweden)

Camille Crouzet

2017-10-01

Full Text Available A new process route for the valorization of BOF steel slags combining H2 production and CO2 mineral sequestration is investigated at 300°C (HT under hydrothermal conditions. A BOF steel slag stored several weeks outdoor on the production site was used as starting material. To serve as a reference, room temperature (RT carbonation of the same BOF steel slag has been monitored with in situ Raman spectroscopy and by measuring pH and PCO2 on a time-resolved basis. CO2 uptake under RT and HT are, respectively, 243 and 327 kg CO2/t of fresh steel slag, which add up with the 63 kg of atmospheric CO2 per ton already uptaken by the starting steel slag on the storage site. The CO2 gained by the sample at HT is bounded to the carbonation of brownmillerite. H2 yield decreased by about 30% in comparison to the same experiment performed without added CO2, due to sequestration of ferrous iron in a Mg-rich siderite phase. Ferric iron, initially present in brownmillerite, is partitioned between an Fe-rich clay mineral of saponite type and metastable hematite. Saponite is likely stabilized by the presence of Al, whereas hematite may represent a metastable product of brownmillerite carbonation. Mg-rich wüstite is involved in at least two competing reactions, i.e., oxidation into magnetite and carbonation into siderite. Results of both water-slag and water-CO2-slag experiments after 72 h are consistent with a kinetics enhancement of the former reaction when a CO2 partial pressure imposes a pH between 5 and 6. Three possible valorization routes, (1 RT carbonation prior to hydrothermal oxidation, (2 RT carbonation after hydrothermal treatment, and (3 combined HT carbonation and oxidation are discussed in light of the present results and literature data.

Perencanaan Strategik SBU Mineral PT Sucofindo (Persero

Directory of Open Access Journals (Sweden)

Suprapto Suprapto

2017-05-01

Full Text Available Strategic planning requires an organization in the face of today's business competition and a more complex future. Likewise, Mineral Gas Station also requires this strategic planning as a newly formed business unit of 2015. Therefore, the company analyzed its internal and external factors as well as a future review of the mineral service industry to stay afloat, grow and develop. The objectives of this study were to identify the internal performance and core competencies of Mineral Gas Station, to identify the external macro environment condition and external micro intensity of mineral service industry competition, to map the current position of the company, to recommend appropriate business strategy in facing competition pressure, and to develop the objectives and program of the company. This research used descriptive and quantitative analysis methods with a purposive sampling technique. The results show that the position of Mineral Gas Station on the intensity of mineral service competition is 'moderate' and is in quadrant of 'grow and build'. Therefore, the appropriate strategy is intensive strategy (market penetration, market development and product development. Mineral Gas Station require to conduct customer satisfaction surveys related to customer perspectives which becomes the most important strategic factor with a focus on customer complaint factor. Further research is needed by involving all external parties so that the results will be more independent.Keywords: mineral services, strategic planning, competition, mineral gas station, SucofindoABSTRAKPerencanaan strategik dibutuhkan organisasi dalam menghadapi persaingan bisnis saat ini dan masa depan yang semakin komplek. Demikian juga yang dibutuhkan SBU Mineral sebagai unit bisnis yang baru terbentuk 2015, dengan menganalisis faktor internal dan ekternal perusahaan serta tinjauan masa depan industri jasa mineral untuk tetap bertahan, tumbuh dan berkembang. Tujuan penelitian ini adalah

Maximising the developmental impacts of South Africa's mineral endowment

CSIR Research Space (South Africa)

Jourdan, P

2017-10-01

Full Text Available , Ta content) 927.0 77% 1,210 Tin (kt metal content) 7.5 3% 294 Zinc (kt Zn content) 274 0 3% 13 400 Africa: Production of Selected Metals in 2013 Commodity Africa Share of world World total Cement (Mt) 165 4% 4,090 Diamond (kcarats) 72,500 55...% 131,000 Graphite (kt) 11 1% 1,100 Phosphate rock (Mt) 41 17% 243 Coal (Mt) 270 4% 6,860 Crude oil (Mbbl) 3,160 11% 28,500 Uranium (kt, U3O8) 12 17% 74 Africa Production of Selected Industrial Minerals and Mineral Fuels in 2013 African exports...

Characterization of manganese phases in mineral processing products of the Azul Mine, Carajas. Metallurgical implications; Caracterizacao de fases manganesiferas em produtos de beneficiamento da Mina do Azul, Carajas. Implicacoes metalurgicas

Energy Technology Data Exchange (ETDEWEB)

Pereira, G.; Fernandez, O.J.Ch., E-mail: pereiragilcimar@hotmail.co, E-mail: ochoque.fernandez@gmail.co [Instituto Federal de Ciencia e Tecnologia do Para (IFPA), Belem, PA (Brazil). Curso de Engenharia de Materiais; Costa, M.L. da, E-mail: mlc@ufpa.b [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Inst. de Geociencias

2010-07-01

Were characterized the manganese phases of the processing products using ore microscopy and x-ray diffraction, in order to contribute with new data and help the processing operations of the mine. Cryptomelane is the main manganese mineral in products, and pyrolusite and nsutite are in minor proportion. Were observed distinctive textures of the cryptomelane and others manganese phases, it were formed in different geological times and therefore affecting the operations in mineral processing, principally, comminution. The observed mineralogical variations affect too the unit operations when expand the pit. (author)

Accounting for escape mortality in fisheries: implications for stock productivity and optimal management.

Science.gov (United States)

Baker, Matthew R; Schindler, Daniel E; Essington, Timothy E; Hilborn, Ray

2014-01-01

Few studies have considered the management implications of mortality to target fish stocks caused by non-retention in commercial harvest gear (escape mortality). We demonstrate the magnitude of this previously unquantified source of mortality and its implications for the population dynamics of exploited stocks, biological metrics, stock productivity, and optimal management. Non-retention in commercial gillnet fisheries for Pacific salmon (Oncorhynchus spp.) is common and often leads to delayed mortality in spawning populations. This represents losses, not only to fishery harvest, but also in future recruitment to exploited stocks. We estimated incidence of non-retention in Alaskan gillnet fisheries for sockeye salmon (O. nerka) and found disentanglement injuries to be extensive and highly variable between years. Injuries related to non-retention were noted in all spawning populations, and incidence of injury ranged from 6% to 44% of escaped salmon across nine river systems over five years. We also demonstrate that non-retention rates strongly correlate with fishing effort. We applied maximum likelihood and Bayesian approaches to stock-recruitment analyses, discounting estimates of spawning salmon to account for fishery-related mortality in escaped fish. Discounting spawning stock estimates as a function of annual fishing effort improved model fits to historical stock-recruitment data in most modeled systems. This suggests the productivity of exploited stocks has been systematically underestimated. It also suggests that indices of fishing effort may be used to predict escape mortality and correct for losses. Our results illustrate how explicitly accounting for collateral effects of fishery extraction may improve estimates of productivity and better inform management metrics derived from estimates of stock-recruitment analyses.

Role of minerals in animal health disorders

Directory of Open Access Journals (Sweden)

Sinovec Zlatan J.

2005-01-01

Full Text Available All mineral matter, essential or non-essential, can have a significant influence on production results and the health of animals, if large quantities of them are present in a feed ration. A maximally tolerant content depends on the animal specie and category. Many factors, such as physiological status (growth, lactation, etc., nutritive status, content and ratio of nutritive matter in the ration, duration of exposure, and the biological level of utilization of elements, also affect the maximally tolerant content of mineral matter in feed. The content of certain mineral matter in plant feed significantly depends on the soil factor, as well as the content and level of utilization of mineral matter from the soil. Mn, Se and Mo can be present in plant feed in such quantities as to induce toxicosis. Industrial contaminants, Cd, Pb or F, can contaminate plants, in particular their leaves, in quantities which lead to the appearance of clinical signs of conventional toxicosis. Moreover, natural water can contain large quantities of S, F, Na, Mg, or Fe, and certain mineral matter can get into water through industrial waste. In addition to the above, it is possible to cause unwanted effects through the frequent, but primarily unprofessional use of mineral additives, since it is extremely important, besides meeting the mineral requirements of each individual element, to secure a ratio among the mineral matter themselves as well as with other nutritive matter. Mineral matter present in food are in mutual interference, and these relations can be synergistic or antagonistic. The sufficiency of a large number of mineral matter has a negative effect on the utilization of other matter (conditional and/or border deficiency, while certain elements cause the clinical appearance of toxic effects. The accidental intake of large quantities of certain mineral matter is revealed as clinical signs of acute toxicosis, which is very different from chronic effects caused by

Mineral scale management. Part II, Fundamental chemistry

Science.gov (United States)

Alan W. Rudie; Peter W. Hart

2006-01-01

The mineral scale that deposits in digesters and bleach plants is formed by a chemical precipitation process.As such, it is accurately modeled using the solubility product equilibrium constant. Although solubility product identifies the primary conditions that must be met for a scale problem to exist, the acid-base equilibria of the scaling anions often control where...

The mineral economy of Brazil--Economia mineral do Brasil

Science.gov (United States)

Gurmendi, Alfredo C.; Barboza, Frederico Lopes; Thorman, Charles H.

1999-01-01

This study depicts the Brazilian government structure, mineral legislation and investment policy, taxation, foreign investment policies, environmental laws and regulations, and conditions in which the mineral industry operates. The report underlines Brazil's large and diversified mineral endowment. A total of 37 mineral commodities, or groups of closely related commodities, is discussed. An overview of the geologic setting of the major mineral deposits is presented. This report is presented in English and Portuguese in pdf format.

Siderophore-mediated iron dissolution from nontronites is controlled by mineral cristallochemistry

Directory of Open Access Journals (Sweden)

Damien eParrello

2016-03-01

Full Text Available Bacteria living in oxic environments experience iron deficiency due to limited solubility and slow dissolution kinetics of iron-bearing minerals. To cope with iron deprivation, aerobic bacteria have evolved various strategies, including release of siderophores or other organic acids that scavenge external Fe(III and deliver it to the cells. This research investigated the role of siderophores produced by Pseudomonas aeruginosa in the acquisition of Fe(III from two iron-bearing colloidal nontronites (NAu-1 and NAu-2, comparing differences in bioavailability related with site occupancy and distribution of Fe(III in the two lattices. To avoid both the direct contact of the mineral colloids with the bacterial cells and the uncontrolled particle aggregation, nontronite suspensions were homogenously dispersed in a porous silica gel before the dissolution experiments. A multiparametric approach coupling UV-vis spectroscopy and spectral decomposition algorithm was implemented to monitor simultaneously the solubilisation of Fe and the production of pyoverdine in microplate-based batch experiments. Both nontronites released Fe in a particle concentration-dependent manner when incubated with the wild-type P. aeruginosa strain, however iron released from NAu-2 was substantially greater than from NAu-1. The profile of organic acids produced in both cases was similar and may not account for the difference in the iron dissolution efficiency. In contrast, a pyoverdine-deficient mutant was unable to mobilise Fe(III from either nontronite, whereas iron dissolution occurred in abiotic experiments conducted with purified pyoverdine. Overall, our data provide evidence that P. aeruginosa indirectly mobilise Fe from nontronites primarily through the production of pyoverdine. The structural Fe present on the edges of Nau-2 rather than Nau-1 particles appears to be more bio-accessible, indicating that the distribution of Fe, in the tetrahedron and/or in the octahedron

Environmental issues and waste management in energy and minerals production

International Nuclear Information System (INIS)

Yegulalp, T.M.; Kim, K.

1992-01-01

This book includes the following topics: water management in the minerals industry; management of radioactive wastes in the energy industry; the US high-level radioactive waste program; acid mine drainage; health risks from uranium mill tailings; alternate energy sources, such as hydrogen; superconductive magnetic energy storage; nuclear waste

IMPROVEMENT ACCOUNTING OF SALES AGRICULTURAL PRODUCTS ON FARM ENTERPRISES

Directory of Open Access Journals (Sweden)

Tashmuratovich Eshmuradov ULUGBEK

2014-11-01

Full Text Available In this study we examine the selling process of farm enterprises,particularly, we will investigate the approach of improving the accounting of sales.The study also examines the factors associated with recognition of revenue in the phase of sale of goods and services of farm enterprises. The findings show that there are numerous mistakes in accounting of sales and financial statements. In addition, we conclude that the main contribution of IAS 41 is to provide a strong conceptual framework in agricultural accounting practice. However, this standard is mainly used in EU. In the study we try to find the ways of applying of IAS 41 in accounting system of farms of the region Samarkand.

IMPROVING THE EFFICIENCY OF MINERAL WOOL SLABS TECHNOLOGY

Directory of Open Access Journals (Sweden)

Perfilov Vladimir Aleksandrovich

2016-03-01

Full Text Available The use of thermal insulation materials is an effective method to create an insulating envelope of a building, as well as to reduce energy costs and increase the durability of building structures. The properties of stone wool products and their operational durability is largely determined by the conditions of formation of the mineral wool carpet, uniform distribution of binder and its curing and the heat treatment conditions. Most domestic technologies are aimed at the production of mineral wool products with volume-oriented structure, which is formed using special units: spreader and corrugator placed in a production line. The next step to obtain the optimum structures is the production of dual density slabs. The denser upper layer receives mechanical loads caused by the operating conditions; the lower, less dense, but more thick layer performs the main function - insulation. The dual density slabs are produced on standard lines supplemented with a special unit, which is located in front of the heat treatment camera. Optimization of heat treatment parameters and prediction of the properties of materials is performed using software package.

Simulation of the long term alteration of clay minerals in engineered bentonite barriers: nucleation and growth of secondary clay particles

International Nuclear Information System (INIS)

Fritz, B.; Clement, A.; Zwingmann, H.; Noguera, C.

2010-01-01

with elevated temperature. Thermodynamic effects are then combined with solubility products and kinetic effects on nucleation and growth of precipitated particles. It is a real challenge for geo-chemists to be able to account for precipitation kinetics in water-rock interaction models, particularly considering systems on short to mid terms (x 1000 y) compared to geological timescales. The recently developed code NANOKIN models dissolution processes of primary minerals as well as the kinetics of precipitation of secondary minerals taking into account the first steps of nucleation and growth and the subsequent evolution of the classes of particles precipitated. With these modellings the predicted evolution of the clay phase gives information on the crystal size distribution of secondary particles precipitated as a function of time. The model also examines the state of the aqueous solution with various mineral phases and combines the classical theory of crystal nucleation with size and morphology dependent kinetic rate laws for growth and/or dissolution of particles i.e. Oswald ripening processes. Ion exchange in mineral phases, and particularly in clay minerals has to be considered as a possible geochemical process taking place in clay barriers under storage conditions. This process might control first the transfer or the fixation of the major cations present in aqueous solutions (Ca 2+ , Mg 2+ , K + , Na + mainly but also H + , Fe 2+ , Al 3+ ) but also radionuclide cations if they might diffuse in the barriers after corrosion of the canisters on long term. When one considers this process from the simulation point of view, the challenge is not so easy. The same simulation has to combine kinetic processes with largely different time scales: near equilibrium cationic exchange reactions, which can be considered as quasi-instantaneous, and clay mineral precipitation which occurs on longer term in over-saturation state with respect to the solution. We have extended the code

CONSIDERATIONS REGARDING THE DIVERSITY OF TANGIBLE ASSETS IN THE LIGHT OF THE NEW ACCOUNTING REGULATIONS

Directory of Open Access Journals (Sweden)

Maria NEGRILA

2017-12-01

Full Text Available Fixed assets represent an important category in the patrimonial structure of any entity, because they have a complex structure and they materialize in items with significant values. As regards the analysis of this group, we can observe the existence of a significant volume of empirical studies regarding the usefulness of the accounting information related to the tangible assets for different categories of potential users of the annual financial statements (among which managers and investors are distinguished with priority. This shows that the place occupied by these assets in the patrimony of the entity is of significant importance. Diverse categories are individually recognized in the accounts as follows: land, landscaping, construction, real estate investments, productive biological assets, tangible assets for the exploration and evaluation of mineral resources. According to the professional reasoning, it is necessary that each item to be registered separately, as a good individual, whether it was purchased in a transaction involving a mix of elements.

Phosphate-Solubilizing and -Mineralizing Abilities of Bacteria Isolated from Soils

Institute of Scientific and Technical Information of China (English)

TAO Guang-Can; TIAN Shu-Jun; CAI Miao-Ying; XIE Guang-Hui

2008-01-01

Microorganisms capable of solubilizing and mineralizing phosphorus (P) pools in soils are considered vital in promoting P bioavailability. The study was conducted to screen and isolate inorganic P-solubilizing bacteria (IPSB) and organic P-mineralizing bacteria (OPMB) in soils taken from subtropical flooded and temperate non-flooded soils, and to compare inorganic P-solubilizing and organic P-solubilizing abilities between IPSB and OPMB. Ten OPMB strains were isolated and identified as Bacillus cereus and Bacillus megaterium, and five IPSB strains as B. megaterium, Burkholderia caryophylli,Pseudomonas ciehorii, and Pseudomonas syringae. P-solubilizing and -mineralizing abilities of the strains were measured using the methods taking cellular P into account. The IPSB strains exhibited inorganic P-sohibilizing abilities ranging between 25.4-41.7 μg P mL-1 and organic P-mineralizing abilities between 8.2-17.8 μg P mL-1. Each of the OPMB strains also exhibited both solubilizing and mineralizing abilities varying from 4.4 to 26.5 μg P mL-1 and from 13.8 to 62.8 μg P mL-1, respectively. For both IPSB and OPMB strains, most of the P mineralized from the organic P source was incorporated into the bacterial cells as cellular P. A significantly negative linear correlation (P < 0.05) was found between culture pH and P solubilized from inorganic P by OPMB strains. The results suggested that P solubilization and mineralization could coexist in the same bacterial strain.

Environmental product declarations in accordance with EN 15804 and EN 16485 — How to account for primary energy of secondary resources?

Energy Technology Data Exchange (ETDEWEB)

Achenbach, Hermann, E-mail: hermann.achenbach@thuenen.de; Diederichs, Stefan K.; Wenker, Jan L.; Rüter, Sebastian

2016-09-15

As a core product category rule (PCR), EN 15804 defines rules for conducting the life cycle assessment (LCA) of building products in the context of environmental product declarations (EPDs). This European standard is complemented by EN 16485, which provides further guidance for specific aspects for the LCA of wood and wood-based construction products. For all life cycle stages under consideration, the renewable and non-renewable primary energy employed for energy generation or material use is accounted for. Furthermore, the inputs and outputs of secondary materials (SM), renewable secondary fuels (RSF) and non-renewable secondary fuels (NRSF) have to be reported. Especially in the end-of life stage as well as in the production stage, the standards do not exactly rule the accounting method of the primary energy contained in SM, RSF and NRSF. As both standards leave room for interpretation, we wrote this discussion article to introduce this issue to the LCA community and to present our developed accounting specifications. In general, we consider EN 15804 and EN 16485 as helpful tools for the LCA of building products. We hope that our ideas on certain aspects contribute to a better understanding of the standards, possibly leading to further improvement in the course of the standardization process.

Environmental product declarations in accordance with EN 15804 and EN 16485 — How to account for primary energy of secondary resources?

International Nuclear Information System (INIS)

Achenbach, Hermann; Diederichs, Stefan K.; Wenker, Jan L.; Rüter, Sebastian

2016-01-01

As a core product category rule (PCR), EN 15804 defines rules for conducting the life cycle assessment (LCA) of building products in the context of environmental product declarations (EPDs). This European standard is complemented by EN 16485, which provides further guidance for specific aspects for the LCA of wood and wood-based construction products. For all life cycle stages under consideration, the renewable and non-renewable primary energy employed for energy generation or material use is accounted for. Furthermore, the inputs and outputs of secondary materials (SM), renewable secondary fuels (RSF) and non-renewable secondary fuels (NRSF) have to be reported. Especially in the end-of life stage as well as in the production stage, the standards do not exactly rule the accounting method of the primary energy contained in SM, RSF and NRSF. As both standards leave room for interpretation, we wrote this discussion article to introduce this issue to the LCA community and to present our developed accounting specifications. In general, we consider EN 15804 and EN 16485 as helpful tools for the LCA of building products. We hope that our ideas on certain aspects contribute to a better understanding of the standards, possibly leading to further improvement in the course of the standardization process.

Accounting for the environment.

Science.gov (United States)

Lutz, E; Munasinghe, M

1991-03-01

Environmental awareness in the 1980s has led to efforts to improve the current UN System of National Accounts (SNA) for better measurement of the value of environmental resources when estimating income. National governments, the UN, the International Monetary Fund, and the World Bank are interested in solving this issue. The World Bank relies heavily on national aggregates in income accounts compiled by means of the SNA that was published in 1968 and stressed gross domestic product (GDP). GDP measures mainly market activity, but it takes does not consider the consumption of natural capital, and indirectly inhibits sustained development. The deficiencies of the current method of accounting are inconsistent treatment of manmade and natural capital, the omission of natural resources and their depletion from balance sheets, and pollution cleanup costs from national income. In the calculation of GDP pollution is overlooked, and beneficial environmental inputs are valued at zero. The calculation of environmentally adjusted net domestic product (EDP) and environmentally adjusted net income (ENI) would lower income and growth rate, as the World Resources Institute found with respect to Indonesia for 1971-84. When depreciation for oil, timber, and top soil was included the net domestic product (NDP) was only 4% compared with a 7.1% GDP. The World Bank has advocated environmental accounting since 1983 in SNA revisions. The 1989 revised Blue Book of the SNA takes environment concerns into account. Relevant research is under way in Mexico and Papua New Guinea using the UN Statistical Office framework as a system for environmentally adjusted economic accounts that computes EDP and ENI and integrates environmental data with national accounts while preserving SNA concepts.

Production of an English/Russian glossary of terminology for nuclear materials control and accounting

Energy Technology Data Exchange (ETDEWEB)

Schachowskoj, S.; Smith, H.A. Jr.

1995-05-01

The program plans for Former Soviet Union National Nuclear Materials Control and Accounting (MC and A) Systems Enhancements call for the development of an English/Russian Glossary of MC and A terminology. This glossary was envisioned as an outgrowth of the many interactions, training sessions, and other talking and writing exercises that would transpire in the course of carrying out these programs. This report summarizes the status of the production of this glossary, the most recent copy of which is attached to this report. The glossary contains over 950 terms and acronyms associated with nuclear material control and accounting for safeguards and nonproliferation. This document is organized as follows: English/Russian glossary of terms and acronyms; Russian/English glossary of terms and acronyms; English/Russian glossary of acronyms; and Russian/English glossary of acronyms.

Study on minerals status of dairy cows and their supplementation through area specific mineral mixture in the state of Jharkhand

Directory of Open Access Journals (Sweden)

B. M. Bhanderi

2016-12-01

Full Text Available Abstract Background Deficiency of macro and micro-minerals in the ration of dairy cows adversely affects growth, milk production and reproduction efficiency. It is essential to examine mineral concentrations in feeds offered to dairy cows in practical farms. Methods Two villages from each taluka were selected at random for taking representative samples of feeds, forages and hair. Within the village, help was sought from village milk producers and district animal husbandry officer for identification of 4 to 5 farmers and collection of representative samples. All the samples were processed and analyzed for chemical composition as well as major macro and micro-minerals, using Inductively Coupled Plasma-Optical Emission Spectrometer. Results Ca content in wheat straw (0.29%, crushed maize (0.02% and wheat bran (0.12% was found to be below the critical level (0.30%. The P content in concentrate ingredients was high (0.26–0.96%, but low in dry roughages (0.06–0.12%. Cereal straws (0.14% and grains (0.12% were deficient in Mg. Feeds and forages were found to be adequate in K (1.50%. Cereals straws were found to be deficient in S (0.11%. Greens were good source of Cu (12.02 ppm. Wheat straw was found to be low in Zn (18 ppm, but high in Mn (225 ppm and Fe (509 ppm. Local grasses and azolla green were found to be rich source of Co (>1.00 ppm. Se (0.63 ppm was present in appreciable quantities in most of the feedstuffs. Conclusions From the present study, it was apparent that the feeds and forages available in the state of Jharkhand may not meet the requirements for Ca, P, Mg, Cu, Zn and Co in order to sustain a milk production of ~10 kg/day. Therefore, it is necessary to supplement these deficient minerals through area specific mineral mixture in the ration of dairy cows for improving productivity and reproduction efficiency.

Review of selected global mineral industries in 2011 and an outlook to 2017

Science.gov (United States)

Menzie, W. David; Soto-Viruet, Yadira; Bermúdez-Lugo, Omayra; Mobbs, Philip M.; Perez, Alberto Alexander; Taib, Mowafa; Wacaster, Susan; ,

2013-01-01

This report reviews the world production of selected mineral commodities in 2011 and includes output projections (based on planned capacity expansions) through 2017. It also includes brief discussions of several issues that are of importance to the mineral sector, including the world economy, the availability of strategic minerals, significant company mergers and acquisitions in 2011, exploration investment made during the year, and the moves towards resource nationalization and expropriation of mineral assets by national Governments.

Haze in Apple-Based Beverages: Detailed Polyphenol, Polysaccharide, Protein, and Mineral Compositions.

Science.gov (United States)

Millet, Melanie; Poupard, Pascal; Le Quéré, Jean-Michel; Bauduin, Remi; Guyot, Sylvain

2017-08-09

Producers of apple-based beverages are confronted with colloidal instability. Haze is caused by interactions between molecules that lead to the formation of aggregates. Haze composition in three apple-based beverages, namely, French sparkling cider, apple juice, and pommeau, was studied. Phenolic compounds, proteins, polysaccharides, and minerals were analyzed using global and detailed analytical methods. The results explained apple juice hazes, where they were the main constituents (18 and 24%). Polysaccharides accounted for 0-30% of haze. Potassium and calcium were the main minerals.

Could Mineral Surfaces have Oriented Amino Acid Polymerization Towards Useful Products?

Science.gov (United States)

Lambert, J. F.; Sakhno, Y.; Battistella, A.; Ribetto, B.; Mezzetti, A.; Georgelin, T.; Jaber, M.; Michot, L.

2017-07-01

We investigated selective amino acid polymerization on the surface of silicic minerals. Specific amino acid couples were deposited on silica or clays, thermally activated, and the oligomers formed were analyzed. Very different behaviors were observed.

Transmission Electron Microscopy of Minerals and Rocks

Science.gov (United States)

McLaren, Alex C.

1991-04-01

Of the many techniques that have been applied to the study of crystal defects, none has contributed more to our understanding of their nature and influence on the physical and chemical properties of crystalline materials than transmission electron microscopy (TEM). TEM is now used extensively by an increasing number of earth scientists for direct observation of defect microstructures in minerals and rocks. Transmission Electron Microscopy of Rocks and Minerals is an introduction to the principles of the technique and is the only book to date on the subject written specifically for geologists and mineralogists. The first part of the book deals with the essential physics of the transmission electron microscope and presents the basic theoretical background required for the interpretation of images and electron diffraction patterns. The final chapters are concerned with specific applications of TEM in mineralogy and deal with such topics as planar defects, intergrowths, radiation-induced defects, dislocations and deformation-induced microstructures. The examples cover a wide range of rock-forming minerals from crustal rocks to those in the lower mantle, and also take into account the role of defects in important mineralogical and geological processes.

Mortality analysis in the French cohort of uranium miners

International Nuclear Information System (INIS)

Vacquier, B.

2008-10-01

The objective of this thesis is to contribute to the estimation of radiation-induced risks at low dose rates. This work is based on the cohort of uranium miners French presenting multiple exposures, contamination by internal (radon and uranium dust) and external exposure (gamma radiation). An analysis of the risk of death and the relationship risk exposure was carried out within the cohort of uranium miners after extension of the monitoring until 1999, for cancers diseases and non-cancers. In addition, an analysis taking into account multiple exposures to ionizing radiation was carried out within the framework of this thesis. This analysis has improved knowledge on the risk of mortality associated with low levels of exposure to radon. (author)

Mineral supply constraints necessitate a global policy response

Science.gov (United States)

Nickless, Edmund

2016-04-01

Adoption on 12 December 2015 of The Paris Agreement, the first universal climate agreement, suggests that nations will invest in infrastructures for renewable energy sources paving the way to a global low-carbon society. These large-scale changes will require vast amounts of metals and minerals. Regardless of whether known supplies are enough to meet demand in the near future, efforts must be made now to forestall unpredictable yet inevitable supply shortages in the decades to come, shortages that would dramatically impact the building of additional generation and distribution capacity, and deployment of low-carbon technology. But in response to the current downturn in commodity prices, the global mining industry is downsizing and reducing investment in the new exploration, putting at risk future security of supply. Mining and climate change are inextricably linked; the new adaptive technologies needed to tackle climate change depend on extraction of minerals and metals. An interdisciplinary group supported by the International Union of Geological Sciences, the International Council for Science Unions and UNESCO proposes measures to avert the looming minerals crisis that is developing in the context of current recycling capacity and exploration trends. Our immediate goal is to stimulate discussion of supply constraints using available data on mineral reserves. We build on recent discussions of supply risk and criticality with a focus on the source of primary resources over the next two to three decades when the availability of metals for recycling will remain low. Current massive production of iron ore and other such commodities despite record low prices indicates a failure of the traditional supply and demand constraints. Broader discussions of metal and mineral supply beyond current criticality are needed given the pace of technological and demographic change as well as rapid development spurts. Furthermore, accessible mineral deposits are irregularly distributed

Accounting for all sugars produced during integrated production of ethanol from lignocellulosic biomass.

Science.gov (United States)

Schell, Daniel J; Dowe, Nancy; Chapeaux, Alexandre; Nelson, Robert S; Jennings, Edward W

2016-04-01

Accurate mass balance and conversion data from integrated operation is needed to fully elucidate the economics of biofuel production processes. This study explored integrated conversion of corn stover to ethanol and highlights techniques for accurate yield calculations. Acid pretreated corn stover (PCS) produced in a pilot-scale reactor was enzymatically hydrolyzed and the resulting sugars were fermented to ethanol by the glucose-xylose fermenting bacteria, Zymomonas mobilis 8b. The calculations presented here account for high solids operation and oligomeric sugars produced during pretreatment, enzymatic hydrolysis, and fermentation, which, if not accounted for, leads to overestimating ethanol yields. The calculations are illustrated for enzymatic hydrolysis and fermentation of PCS at 17.5% and 20.0% total solids achieving 80.1% and 77.9% conversion of cellulose and xylan to ethanol and ethanol titers of 63g/L and 69g/L, respectively. These procedures will be employed in the future and the resulting information used for techno-economic analysis. Copyright © 2016 Elsevier Ltd. All rights reserved.

Aggregates from mineral wastes

Directory of Open Access Journals (Sweden)

Baic Ireneusz

2016-01-01

Full Text Available The problem concerning the growing demand for natural aggregates and the need to limit costs, including transportation from remote deposits, cause the increase in growth of interest in aggregates from mineral wastes as well as in technologies of their production and recovery. The paper presents the issue related to the group of aggregates other than natural. A common name is proposed for such material: “alternative aggregates”. The name seems to be fully justified due to adequacy of this term because of this raw materials origin and role, in comparison to the meaning of natural aggregates based on gravel and sand as well as crushed stones. The paper presents characteristics of the market and basic application of aggregates produced from mineral wastes, generated in the mining, power and metallurgical industries as well as material from demolished objects.

Fibre fortification of wheat bread: impact on mineral composition and bioaccessibility.

Science.gov (United States)

Martins, Zita E; Pinto, Edgar; Almeida, Agostinho A; Pinho, Olívia; Ferreira, Isabel M P L V O

2017-05-24

In this work, wheat bread was fortified with fibre enriched extracts recovered from agroindustry by-products, namely, elderberry skin, pulp and seeds (EE); orange peel (OE); pomegranate peel and interior membranes (PE); and spent yeast (YE). The impact of this fortification on the total and bioaccessible mineral composition of wheat breads, estimated mineral daily intake, and the relationship between bioaccessibility and dietary fibre was evaluated. Fortification with OE, EE, and PE improved the content of essential minerals in bread when compared to control bread. The exception was bread fortified with YE, which presented a mineral content similar to control bread, but its mineral bioaccessibility was significantly higher than in all the other bread formulations. The opposite was observed for PE bread, which presented a significant reduction of bioaccessible minerals. We concluded that the origin of the fibre rich extract must be carefully selected, to avoid potential negative impact on mineral bioaccessibility.

210Pb in bone in vivo - a biodosimeter for assessing uranium miner radon progeny exposure

International Nuclear Information System (INIS)

Guilmette, R.A.; Snipes, M.B.; Hoover, M.D.; Leggett, R.W.; Laurer, G.R.; Lambert, W.E.; Coons, T.A.; Gilliland, F.D.

2002-01-01

A joint analysis of the results of 11 epidemiological studies of lung cancer among uranium miners has shown a significant level of variability in the relative risk per unit of exposure - in the range of a factor of 30 (Lubin et al., 1994). A significant fraction of the uncertainty associated with these risk coefficients may be due to differences in the methods and quality of data used in calculating cumulative exposures, in WLM, for the various miner populations. We hypothesize that in vivo measurement of 210 Pb, a long-lived radon decay product that is retained in bone, will provide an improved measure of Rn progeny exposures received by individual miners during their mining careers. To accomplish such in vivo measurements, the lovelace in vivo bioassay facility (LIVBF) was modified to obtain an optimized counting geometry for measuring 210 Pb in the skull. Six 12.7 cm diameter phoswich detectors were positioned about the head of a reclining subject (one in the posterior, and one in the anterior position, and four about the mid-sagittal plane), and photon emission from the skull was measured using anticoincidence multichannel analysis electronics. We analyzed the in vivo data from about 90 former uranium miners from the grants mining district, and compared the recorded WLM exposures for each uranium miner (data from the UNM epidemiological data base) with a WLM exposure calculated using a model developed specifically for this study. This model couples a Pb biokinetic model with the ICRP publication 66 respiratory tract dosimetry model. The analyses show that the independent measurements of exposure are statistically correlated, but with a large degree of variability occurring among individual values, and that a major source of uncertainty in mining exposure estimation is the uncertainty involved in accounting for non-mining sources of 210 Pb. (orig.)

Chemical dissolution of sulfide minerals

Science.gov (United States)

Chao, T.T.; Sanzolone, R.F.

1977-01-01

Chemical dissolution treatments involving the use of aqua regia, 4 N HNO3, H2O2-ascorbic acid, oxalic acid, KClO3+HCl, and KClO3+HCl followed by 4 N HNO3 were applied to specimens of nine common sulfide minerals (galena, chalcopyrite, cinnabar, molybdenite, orpiment, pyrite, stibnite, sphalerite, and tetrahedrite) mixed individually with a clay loam soil. The resultant decrease in the total sulfur content of the mixture, as determined by using the Leco induction furnace, was used to evaluate the effectiveness of each chemical treatment. A combination of KClO3+HCl followed by 4 N HNO3 boiling gently for 20 min has been shown to be very effective in dissolving all the sulfide minerals. This treatment is recommended to dissolve metals residing in sulfide minerals admixed with secondary weathering products, as one step in a fractionation scheme whereby metals in soluble and adsorbed forms, and those associated with organic materials and secondary oxides, are first removed by other chemical extractants.

Effects of a long-acting trace mineral rumen bolus supplement on growth performance, metabolic profiles, and trace mineral status of growing camels.

Science.gov (United States)

Alhidary, Ibrahim A; Abdelrahman, Mutassim M; Harron, Raafat M

2016-04-01

A study was conducted to evaluate the effects of a long-acting trace mineral rumen bolus (TMB) supplement on the productive performance, metabolic profiles, and trace mineral status of growing camels under natural grazing conditions. Fifteen 6-month-old growing male camels (average bodyweight 139.51 ± 26.49 kg) were used in a 150-day trial. Animals were individually housed in a shaded pen and randomly assigned to receive zero (control group, CON), one (TMB1), or two (TMB2) long-acting TMBs. Feed intake was measured weekly, and camels were weighed monthly. Blood samples were collected from all camels on days 1, 30, 60, 90, 120, and 150 to obtain metabolic profiles. Zinc, selenium, copper, cobalt, and manganese concentrations were determined in the diet, serum, and liver. In comparison with controls, giving camels one TMB increased the average daily gain (14.38%; P camels in the TMB2 group. These data indicate that TMB supplementation has positive effects on the growth performance and trace mineral profiles of camels. Different levels, sources, and synergistic combinations of trace minerals can be used in further studies to elucidate their abilities to increase productive variables as well as their availability and cost to the camel industry.

Dry season supplementation of dairy cows with urea molasses mineral blocks and molasses-urea mix in the Morogoro region in Tanzania

International Nuclear Information System (INIS)

Plaizier, J.C.B.; McBride, B.W.; Nkya, R.; Shem, M.N.; Urio, N.A.

1999-01-01

The effects of supplementation with urea molasses mineral blocks and molasses-urea mix during and immediately prior to the dry season on the production of dairy cows were studied on-station and on small holder peri-urban farms near Morogoro, Tanzania. Supplementation of on-station cows receiving ad libitum grass hay and 6 kg/d of maize bran with urea molasses mineral blocks (UMMB), increased milk production from 6.7 L/d to 11.2 L/d (P <0.05) and dry matter intake from 10.1 kg/d to 12.0 kg/d (P <0.05), but did not significantly affect milk composition, intake of hay and live weight change. This increase in milk yield is mainly explained by increased intakes of energy and nitrogen. Supplementation with the molasses urea mix increased daily milk yield from 6.7 L/d to 8.8 L/d (P <0.05), but did not significantly affect the other measured production parameters. The on-farm supplementation with blocks increased daily milk yield by 1.7 L/d in the dry season (P <0.01). This supplementation did not increase milk yields prior to the dry season, since quality forage was still available. Taking the production costs into account, supplementation with the blocks and supplementation with molasses mix was cost effective if milk yields increased by 0.7 L/d. (author)

In vitro dialyzability of essential minerals from white and whole grain pasta.

Science.gov (United States)

Vignola, María Belén; Bustos, Mariela Cecilia; Pérez, Gabriela Teresa

2018-11-01

The aim of the present investigation was to study the in vitro mineral dialyzability of pasta made with white and whole-grain flours obtained from two genotypes (Klein Guerrero and Baguette Premium 11) with different mineral contents. Pasta samples were made from white flour (FP), and whole grain flour from cyclonic mill (WFAP) and blade mill (WFBP). Mineral content and in vitro digestion were determined on all samples to study starch variation and mineral dialyzability. Whole-grain pasta contained significantly higher amounts of minerals than FP, since bran and embryo are richer in minerals than endosperm. In addition to the low content of mineral composition observed in FP, the dialyzability of some minerals (Cu, Fe, Mg and Zn) was higher than whole-grain pasta even when the percentage of starch hydrolyzed after intestinal digestion was higher than FP. These results can also be useful for developing wheat-based products rich in the desired minerals. Copyright © 2018 Elsevier Ltd. All rights reserved.

Risks from Radon: Reconciling Miner and Residential Epidemiology

International Nuclear Information System (INIS)

Chambers, Douglas B.; Harley, Naomi H.

2008-01-01

Everyone is exposed to radon, an inert radioactive gas that occurs naturally and is present everywhere in the atmosphere. The annual dose from radon and its (short-lived) decay products is typically about one-half of the dose received by members of the public from all natural sources of ionizing radiation. Data on exposures and consequent effects have recently been reviewed by the National Council on Radiation Protection and Measurements (NCRP) and the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR). Studies of underground miners provides a well-established basis for estimating risks from occupational exposures to radon and for studying factors that may affect the dose response relationship such as the reduction of risk (coefficients) with increasing time since exposure. Miners' studies previously formed the basis for estimating risks to people exposed to radon at home, with downward extrapolation from exposures in mines to residential levels of radon. Presently, the risk estimates from residential studies are adequate to estimate radon risks in homes. Although there are major uncertainties in extrapolating the risks of exposure to radon from the miner studies to assessing risks in the home, there is remarkably good agreement between the average of risk factors derived from miner studies and those from pooled residential case-control studies. There are now over 20 analytical studies of residential radon and lung cancer. These studies typically assess the relative risk from exposure to radon based on estimates of residential exposure over a period of 25 to 30 years prior to diagnosis of lung cancer. Recent pooled analyses of residential case-control studies support a small but detectable lung cancer risk from residential exposure, and this risk increases with increasing concentrations. The excess relative risk of lung cancer from long-term residential exposure is about the same for both smokers and non-smokers; however, because the

Review of results from epidemiological studies of miners

International Nuclear Information System (INIS)

Laurier, Dominique; Vacquier, Blandine; Leuraud, Klervi; Tirmarche, Margot

2008-01-01

Full text: Studies of miners played a major role in the classification of radon gas and its decay products as a certain lung carcinogen for humans by the International Agency for Research on Cancer in 1987. A comprehensive review of epidemiological results from miners' studies was published in the BEIR VI report in 1999. Since then, many results have been published. The present paper reviews the results related to cancer risks associated to alpha emitters obtained from miners' studies since 1999. More than 40 articles or reports are reviewed. Data from eleven cohorts were considered in the BEIR VI report. Since 1999, six of these cohorts have been enlarged or extended. Additional data, not available at the time of the BEIR VI report, have also been collected, such as additional data about mines exposures (gamma rays, inhalation of uranium ore dust), smoking behaviour, information about morbidity or histology of the cancers. Some revision of dosimetric estimates also occurred. New cohorts have developed in Germany, in the Czech Republic and in China. Also, some collaborative research programs were launched, especially in Europe and are presently supported in the frame of the Alpha-risk project. This involvement of the available data provided the basis for many research works. Most of the studies aimed at a better quantification of the relation between radon exposure and lung cancer risk. Globally, the results confirm the existence of a significant association, compatible with a linear relationship. A decrease of the magnitude of the association is consistently found with time since exposure. A modifying effect of age at exposure is also repeatedly observed. The existence of an inverse exposure-rate effect, suggested by some studies, is not confirmed at low levels of exposure. It was also confirmed that a radon associated lung cancer risk persists after taking into account smoking. Some studies provided results on diseases other than lung cancer. Especially, several

Significance, mechanisms and environmental implications of microbial bio-mineralization

International Nuclear Information System (INIS)

Benzerara, K.; Miot, J.; Morin, G.; Ona-Nguema, G.; Skouri-Panet, F.; Ferard, C.

2011-01-01

Microorganisms can mediate the formation of minerals by a process called bio-mineralization. This process offers an efficient way to sequester inorganic pollutants within relatively stable solid phases. Here we review some of the main mechanisms involved in the mediation of mineral precipitation by microorganisms. This includes supersaturation caused by metabolic activity, the triggering of nucleation by production of more or less specific organic molecules, and the impact of mineral growth. While these processes have been widely studied in the laboratory, assessment of their importance in the environment is more difficult. We illustrate this difficulty using a case study on an As-contaminated acid mine drainage located in the South of France (Carnoules, Gard). In particular, we explore the potential relationships that might exist between microbial diversity and mineral precipitation. The present review, far from being exhaustive, highlights some recent advances in the field of bio-mineralogy and provides non-specialists an introduction to some of the main approaches and some questions that remain unanswered. (authors)

Influence of liberation of sulphide minerals on flotation of sedimentary copper ore

Directory of Open Access Journals (Sweden)

Bakalarz Alicja

2017-01-01

Full Text Available Ore liberation is one of the most important parameter in mineral processing, especially in flotation. To separate the valuable components from gangue minerals, it is necessary to liberate one from others. It is achieve primarily through crushing and grinding. These stages are one of the most expensive of mineral production. It is important to determine the adequate mineral liberation which would result in huge savings in the overall cost of flotation plant. The aim of the paper was the analysis of the influence of milling time on the laboratory flotation of the copper ore from stratiform Polish deposit. Three different milling time of copper ore in laboratory ball mill was applied. The flotation results were presented as the recovery-recovery and grade-recovery upgrading curves. The liberation of sulphides and the particle size of sulphides in flotation product were analysed and compared.

Mineral Soil Carbon in Managed Hardwood Forests of the Northeastern US

Science.gov (United States)

Vario, C.; Friedland, A.; Hornig, C.

2013-12-01

New England is characterized by extensive forest cover and large reservoirs of soil carbon (C). In northern hardwood forests, mineral soil C can account for up to 50% of total ecosystem C. There has been an increasing demand for forests to serve both as a C sink and a renewable energy source, and effective management of the ecosystem C balance relies on accurate modeling of each compartment of the ecosystem. However, the dynamics of soil C storage with respect to forest use are variable and poorly understood, particularly in mineral soils. For example, current regional models assume C pools after forest harvesting do not change, while some studies suggest that belowground mineral soil C pools can be affected by disturbances at the soil surface. We quantified mineral soil C pools in previously clear-cut stands in seven research or protected forests across New York, New Hampshire, Massachusetts, and Vermont. The ages of the sites sampled ranged from recently cleared to those with no disturbance history, with 21 forest stands represented in the study. Within each research forest studied, physical parameters such as soil type, forest type, slope and land-use history (aside from forest harvest) did not vary between the stands of different ages. Soil samples were collected to a depth of 60 cm below the mineral-organic boundary using a gas-powered augur and 9.5-cm diameter drill bit. Samples were collected in 10-cm increments in shallow mineral soil and 15-cm increments from 30-60 cm depth. Carbon, nitrogen (N), pH, texture and soil mineralogy were measured across the regional sites. At Bartlett Experimental Forest (BEF) in New Hampshire, mineral soil biogeochemistry in cut and uncut sites was studied at a finer scale. Measurements included soil temperature to 55 cm depth, carbon compound analyses using Py-GCMS and soil microbial messenger RNA extractions from mineral soil. Finally, we simulated C dynamics after harvesting by building a model in Stella, with a particular

PENGARUH GROSS DOMESTIC PRODUCT, INFLASI, SUKU BUNGA, MONEY SUPPLY, CURRENT ACCOUNT DAN CAPITAL ACCOUNT TERHADAP NILAI KURS RUPIAH INDONESIA – DOLLAR AMERIKA

Directory of Open Access Journals (Sweden)

Yunika Murdayanti

2012-03-01

Full Text Available Since free-floating exchange rate system has been applied in Indonesia on August 1998, the accumulation of depreciation of rupiah against the US dollar has been about 48,7% until December 2001. This condition brings many argumentation about the reasons behind the exchange rate instability faced by Indonesia among many experts whether it is caused by economic factors or by non-economic factors. By recognizing the causes, it will be easier for the experts and government of Indonesia to formulate the solution. This research is intended to analyze the influence of economic variables, i.e. Gross Domestic Product, money supply, interest rate, inflation rate, Current Account & Capital Account in both Indonesia and The United State of America, as well as the position of the balance of international payment of Indonesia to the exchange rate movement in order to give contributions to solve the problem. Based on the result money supply becomes the only variable which has a multicollinearity and excluded from the regression linear. Also only current account is not significant influence on the exchange rate movement, instead of the other variables. Coefficient of determination of the research model is 84.4 %, means that other factors, not accommodated in this research, give 15.6 % influence to the exchange rate movement. These other factors can be categorized as other economic factors or non-economic factors.

Cost accounting for the radiologist.

Science.gov (United States)

Gentili, Amilcare

2014-05-01

Cost accounting is the branch of managerial accounting that deals with the analysis of the costs of a product or service. This article reviews methods of classifying and allocating costs and relationships among costs, volume, and revenues. Radiology practices need to know the cost of a procedure or service to determine the selling price of a product, bid on contracts, analyze profitability, and facilitate cost control and cost reduction.

Applied mineral exploration with special reference to uranium

International Nuclear Information System (INIS)

Bailey, R.V.; Childers, M.O.

1977-01-01

An explanation of the fundamentals of organizing, operating, and concluding an exploration program, particularly uranium exploration, is presented. Discussion of many exploration practices currently being used in the industry and a review of some new developments or research projects which are being studied or which show promise are included. The material is presented in 13 chapters entitled: the Mineral Explorationist and the Role He Plays; Types of Uranium Deposits; Development of Idea and Preliminary Investigation: Uranium; a Review of Mining Law as it Pertains to Mineral Exploration and Development in the United States; Land Ownership and Leasing; Continuing Detailed Geologic Work; the Decision to Make a Play; Selling a Deal; Legal and Accounting Aspects; the Drilling Program; Using Geology in Planning and Executing Drilling; Transition from Exploration to Development; and a Forward Look

In-bed accountability of tritium in production scale metal hydride storage beds

International Nuclear Information System (INIS)

Klein, J.E.

1995-01-01

An ''in-bed accountability'' (IBA) flowing gas calorimetric measurement method has been developed and implemented to eliminate the need to remove tritium from production scale metal hydride storage beds for inventory measurement purposes. Six-point tritium IBA calibration curves have been completed for two, 390 gram tritium metal hydride storage beds. The calibration curves for the two tritium beds are similar to those obtained from the ''cold'' test program. Tritium inventory errors at the 95 percent confidence level ranged from ± 7.3 to 8.6 grams for the cold test results compared to ± 4.2 to 7.5 grams obtained for the two tritium calibrated beds

Minerals Industry' 97. Survey report

International Nuclear Information System (INIS)

1997-01-01

The aim of this annual survey is to provide timely and accurate financial data such as production, price movements, profitability, distribution of assets by activity, employment and labour cost and taxation on the Australian minerals industry. It aims to facilitate more informed debate on the industry's role and importance in the economy. The report also includes information on the safety and health performance and overseas exploration expenditure of the minerals industry. This twenty-first survey relates to the year ended 30 June 1997. The proportion of activity covered in this year's survey is comparable with the 1996 survey. The mineral industry is defined as including exploration for, extraction and primary processing of minerals in Australia. The oil, gas, iron and steel industries are excluded. As for the uranium industry, increased mine capacity over the medium term saw a switch away from spot market purchases to long term contracts for uranium in 1996. This, coupled with announced releases from the US stockpile, saw downward pressure on spot market prices for uranium during 1996/97. The average spot market price for U 3 O 8 fell by an average of 6 percent during 1996/97 and was approximately 16 percent lower than three years ago. General uncertainty over the future profitability of coal industry is compounded by the likely softness of future coal prices

A Crosswalk of Mineral Commodity End Uses and North American Industry Classification System (NAICS) codes

Science.gov (United States)

Barry, James J.; Matos, Grecia R.; Menzie, W. David

2015-09-14

This crosswalk is based on the premise that there is a connection between the way mineral commodities are used and how this use is reflected in the economy. Raw mineral commodities are the basic materials from which goods, finished products, or intermediate materials are manufactured or made. Mineral commodities are vital to the development of the U.S. economy and they impact nearly every industrial segment of the economy, representing 12.2 percent of the U.S. gross domestic product (GDP) in 2010 (U.S. Bureau of Economic Analysis, 2014). In an effort to better understand the distribution of mineral commodities in the economy, the U.S. Geological Survey (USGS) attempts to link the end uses of mineral commodities to the corresponding North American Industry Classification System (NAICS) codes.

Implementation of a system of social accounting in the cooperative of agricultural production “Camilo Cienfuegos” and in the basic unit of cooperative production “Julian Alemán". Main results

Directory of Open Access Journals (Sweden)

Yamira Mirabal González

2014-12-01

• To determine the results of the implementation of the System of Social Accounting in the Cooperative of Agricultural Production “Camilo Cienfuegos” and in the Basic Unit of Cooperative Production “Julián Alemán”.    The main results of the investigation are centered in: Characterization of the administration of the Cooperative of Agricultural Production “Camilo Cienfuegos” and of the Basic Unit of Cooperative Production “Julián Alemán”, evaluation of the level of execution of a group of premises that you/they allow the implementation of the system and the results of the implementation of the System of Social Accounting in both cooperatives.

Use of thermogravimetry on rational analysis of clay minerals from state of Mato Grosso do Sul

International Nuclear Information System (INIS)

Salvetti, Alfredo Roque; Rodrigues, Henrique Mauro

1997-01-01

The rational analysis on clay minerals, normally uses as structural water, the mass loss by firing. The presence of organic materials, sulphur or others minerals, can cause an error on quantification of structural water. With the use of thermal gravimetric analysis, we can calculate, in a more precise way, the quantity of mass loss by dehydroxylation, without take into account the loss of mass from others process. We compared the rational chemical analysis on some clay minerals from state of Mato Grosso do Sul using burning loss and thermal gravimetric analysis. (author)

SUMMARY OF ACCOUNTING DATA AND ITS APPLICATION DURING THE PROCESS OF CLOSURE OF ACCOUNTS

Directory of Open Access Journals (Sweden)

Stanislava Pancheva

2016-06-01

Full Text Available In an market economy, where each entity has autonomy in developing their production programs, production plans and social development to identify strategies pricing policy has significantly increased the responsibility of the management of taken by them management decisions. In order to develop effective and operative decisions managers need reliable information for both the production and the financial position of the company. As is known, traditional accounting, which covers much of the existing information systems do not provide managers at all levels of operational information, and this is achieved through management accounting. Namely the creation of nontraditional systems for forming information about production costs and the financial results, the use of new methods to management, the increased value of the information obtained for decision making appears at present one of the most actual problems of accounting, control and analysis of economic activity. In this article we aim to define the concept of management information, to systematize the information needs of different users and qualitative characteristics that should have useful information.