Single Point Incremental Forming and Multi-Stage Incremental Forming on Aluminium Alloy 1050

Science.gov (United States)

Suriyaprakan, Premika

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Albumin and fibronectin adsorption and osteoblast adhesion on titanium oxides

Science.gov (United States)

Freitas, Susana Maria Ribeiro e. Sousa Mendes de

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Stellar activity in high-precision photometric and spectroscopic transit observations

Science.gov (United States)

Oshagh, Mahmoudreza

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Reciprocal interaction between human microvascular endothelial cells and mesenchymal stem cells on macroporous granules of nanostructured-hydroxyapatite agglomerates

Science.gov (United States)

Laranjeira, Marta de Sousa

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Impact evaluation of the large scale integration of electric vehicles in the security of supply

Science.gov (United States)

Bremermann, Leonardo Elizeire

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Starch and polyethylene based bone-analogue composite biomaterials

Science.gov (United States)

Reis, Rui Luis Goncalves dos

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Magnetism at the nanoscale: Nanoparticles, nanowires, nanotubes and their ordered arrays

Science.gov (United States)

Proenca, Mariana Jesus Paiva

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Birefringence and Bragg grating control in femtosecond laser written optical circuits

Science.gov (United States)

Fernandes, Luis A.

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Improving the characteristics of foundry alloys AlSiCuMg during manufacturing

Science.gov (United States)

Fragoso, Bruno Filipe Marques

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Seismic assessment of reinforced concrete frame structures with a new flexibility based element

Science.gov (United States)

Arede, Antonio Jose Coelho Dias

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Biological effects of polyacrylic acid-coated and non-coated superparamagnetic iron oxide nanoparticles in in vitro and in vivo experimental models

Science.gov (United States)

Couto, Diana Manuel Mocho de Bastos

As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

Estratégias produtivas e aplicacao de princípios d agroecologia

DEFF Research Database (Denmark)

Almeida, Gustavo Fonseca; de Abreu, Lucimar Santiago

2009-01-01

The article presents an analysis of production strategies of certified units of a family-smallholder's cooperative from Itápolis - SP. Units were observed to incorporate agro-ecological principles of ecology-based agriculture, in observance of agro-biodiversity, material recycling and socioeconom...

Crioterapia no pos-parto: tempo de aplicacao e mudancas na temperatura perineal

Directory of Open Access Journals (Sweden)

Adriana Amorim Francisco

2013-06-01

Full Text Available Estudo descritivo com dados de dois ensaios clínicos realizados em 2008 e 2009 em uma maternidade de uma instituição filantrópica da cidade de São Paulo. Teve como objetivo descrever a temperatura perineal após a aplicação de bolsa de gelo no pós-parto normal. Três grupos com 38 puérperas cada (n=114 receberam aplicação perineal de bolsa de gelo entre 2 e 48h após o parto. Os achados indicaram que com 10 min de crioterapia as médias da temperatura perineal atingiram de 13,3 a 15,3oC, com pequena redução de temperatura ao final de aplicações de 15 e 20 minutos (2,4 e 2,7o, respectivamente. Após resfriamento por 10 min., as mulheres referiram frio e alívio e, depois de 15 a 20 min., dormência e anestesia local. Conclui-se que 10 minutos de aplicação foram suficientes para reduzir a temperatura perineal aos níveis recomendados para analgesia (10-15oC.

Crioterapia no pos-parto: tempo de aplicacao e mudancas na temperatura perineal

OpenAIRE

Adriana Amorim Francisco; Sonia Maria Junqueira Vasconcellos de Oliveira; Lucila Coca Leventhal; Caroline de Souza Bosco

2013-01-01

Estudo descritivo com dados de dois ensaios clínicos realizados em 2008 e 2009 em uma maternidade de uma instituição filantrópica da cidade de São Paulo. Teve como objetivo descrever a temperatura perineal após a aplicação de bolsa de gelo no pós-parto normal. Três grupos com 38 puérperas cada (n=114) receberam aplicação perineal de bolsa de gelo entre 2 e 48h após o parto. Os achados indicaram que com 10 min de crioterapia as médias da temperatura perineal atingiram de 13,3 a 15,3oC, com peq...

Application of cyclodextrins in textile processes;Aplicacao de ciclodextrinas em processos texteis

Energy Technology Data Exchange (ETDEWEB)

Andreaus, Juergen; Dalmolin, Mara C.; Oliveira Junior, Iguatemy B. de; Barcellos, Ivonete O., E-mail: jandr@furb.b [Universidade Regional de Blumenau, SC (Brazil). Dept. de Quimica

2010-07-01

Cyclodextrins (CDs) are water soluble cyclic sugars with a hydrophobic nanometric cavity that permits the formation of host/guest inclusion complexes with a large variety of molecules, alternating their physical-chemical properties. In the present review CD research related to the processing of textiles is revised and discussed. CDs may function as encapsulating, dispersing and levelling agents in the dyeing and washing of textiles. Furthermore they may be anchored to polymers and textile fibers in order to impart special properties such as odor reduction, UV protection or for the controlled release of perfumes, aromas, mosquito repellents or substances with therapeutical effects. (author)

EMITEL e-encyclopaedia of medical physics and dictionary of terms; Enciclopedia eletronica de fisica medica e dicionario de termos - EMITEL

Energy Technology Data Exchange (ETDEWEB)

Tabakov, Slavik; Tabakova, Vassilka [King' s College, London (United Kingdom); Smith, Peter [International Organization for Medical Physics (IOMP), York (United Kingdom); Milano, Franco [University of Florence (Italy); Strand, Sven-Erik [University of Lund (Sweden); Lewis, Cornelius [King' s College Hospital (United Kingdom); Stoeva, Magdalena [AM Studio, Plovdiv (Bulgaria)

2011-07-01

EMITEL, the e-Encyclopaedia of Medical Physics and its Multilingual Translator (dictionary) have been launched at WC2009 (www.emitel2.eu). This international project attracted more than 300 specialists from 36 countries and grew to be the largest international project in the profession. This paper describes the development of EMITEL, its effective use, and its planned future development. (author)

Comparative study between different nitrosyls hemoproteins using electron paramagnetic resonance; Estudo comparativo entre diferentes nitrosil hemoproteinas por ressonancia paramagnetica eletronica

Energy Technology Data Exchange (ETDEWEB)

Caracelli, Ignez

1988-12-31

Using the Electron Paramagnetic Resonance (EPR) technique, the properties of several nitrosyl hemoproteins were investigated as a function of temperature, pH and nitric oxide (NO) concentration. (author). 59 refs., 53 figs., 6 tabs.

New zirconium alloys for nuclear application; Novas ligas de zirconio para aplicacao nuclear

Energy Technology Data Exchange (ETDEWEB)

Lobo, R.M.; Andrade, A.H.P., E-mail: rmlobo@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2010-07-01

Zirconium alloys are widely used in the nuclear industry, mainly in fuel cladding tubes and structural components for PWR plants. The service life of these components, which operate under high temperatures conditions ({approx} 300 deg C), has led to developing new alloys with the aim to improve the mechanical properties, corrosion resistance and irradiation damage. The variation in the composition of the alloy produces second phase particles which alter the materials properties according to their size and distribution, is essential therefore, knowledge their characteristics. Analysis of second phase particles in zirconium alloys are carried out by scanning electron microscopy, transmission electron microscopy and image analysis. This study used the zircaloy-4 to illustrate the characterization of these alloys through the study of second phase particles. (author)

Mechanized covering application in equipment surfaces; Aplicacao mecanizada de revestimento em superficies de equipamentos

Energy Technology Data Exchange (ETDEWEB)

Abreu, Billy A. de; Broering, Carlos E. [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Dept. de Engenharia Mecanica

2004-07-01

Facing such challenges, the main objective of this work is to develop automated equipment and new welding procedures to be used to repair tank reservoirs operating in corrosive media. The equipment is expected to be applied directly in the maintenance of petrochemical plants. The project consists on a mechanical displacement device, able to move along a flexible rail, which can be fixed to a concave or convex surface and fitting itself to the geometry. A transversal arm gives it a second movement ability, allowing oscillatory displacements and the exact positioning of the pistol. As it is widely known, the automated welding process results in a considerably increase in productivity and quality, when comparing to the hand made process. Therefore, knowing the parameters involved and adjusted the welding variables to the best values, it is expected to achieve welding free of imperfections, inconsistencies and errors, and able to be repetitive. (author)

Electronic paramagnetic resonance (EPR) of spices treated by gamma irradiation; Ressonancia paramagnetica eletronica (RPE) aplicada a analise de especiarias irradiadas (com radiacao gama)

Energy Technology Data Exchange (ETDEWEB)

Leal, Alexandre Soares; Rodrigues, Rogerio Rivail, E-mail: asleal@cdtn.b [Centro de Desenvolvimento de Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Serv. de Reator e Irradiacoes; Krambrock, Klaus; Guedes, Kassilio [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)

2004-07-15

The treatment of food by ionizing radiation is a method that has been increased in many countries in substitution for the use of chemical products. The knowledge of safe and reliable techniques of detection of irradiated food is a factor that can contribute to the largest acceptance for the consuming market. This work presents the electron paramagnetic resonance (EPR) as method of detection of the irradiated spices rosemary and cilantro. The obtained results indicate that EPR can be used satisfactorily for that group of victuals in the identification of irradiated species and in the determination of the received dose. (author)

Application of minerals residues in the asphalt composition; Aplicacao de residuos minerais na composicao do asfalto

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Roberto Carlos da C.; Seidl, Peter Rudolf [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Correia, Julio Cesar Guedes [Centro de Tecnologia Mineral - CETEM, Rio de Janeiro, RJ (Brazil)

2004-07-01

The performance of asphalt pavements depends mainly on the properties of their constituents: mineral aggregates and asphalt cement. The mineral aggregate represents about 95% in weight of asphalt mixtures having a significant influence on the properties and performance of these mixtures. Asphalt cement (CAP) corresponds to the smaller fraction but it is mainly responsible for adsorption on the mineral aggregates. The objective of this study was to evaluate the interaction between different CAPs with residues from granite saw wills in place of mineral aggregates that run up costs with extraction and processing in asphalt production. This way asphalt production costs as well as the environmental problems that are caused by mineral residue are reduced. Five different asphalt cements, referred to as A, B, C, D and E, and a granite residue were used in this work. The results indicated that the residue strongly absorbs all the CAPs that were studied; particularly CAP A, which is considered the most adequate for the production of asphalt from this residue. Preliminary tests this indicate that asphalt production can use mineral residues instead of mineral aggregates in its composition. (author)

Prosopis jiliflora`s gum may have industrial applications; Goma de algaroba: substancia pode ter aplicacao industrial

Energy Technology Data Exchange (ETDEWEB)

Ponte, Isabel M.C. Baptista; Andrade, Cristina Tristao de [Universidade Federal, Rio de Janeiro, RJ (Brazil); Khalil, Carlos N. [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

1992-10-01

This work presents and describes the chemical analysis of several parts of Algaroba tree (Prosopis juliflora) which even though not being original from Brazil adapted very well in the desert areas of Northeast Brazil. The chemical composition of several parts of the plant is presented. Several possible industrial applications are presented and discussed 1 fig.; 1 tab.

Self-referencing thermometry in the nanoscale =

Science.gov (United States)

Brites, Carlos Antonio Delgado Sousa

Na ultima decada emergiu uma linha de investigacao muito activa em termometros nao invasivos e precisos que possam determinar temperatura a escala nanometrica. Esta investigacao foi fortemente estimulada pelas numerosas solicitacoes da nanotecnologia e da biomedicina, por exemplo. Uma das abordagens mais promissoras propoe o uso de ioes trivalentes de lantanideos que apresenta propriedades fotoluminescentes que dependem da temperatura. Neste trabalho demonstra-se que esta tecnica combina as vantagens de te um limite de deteccao de 0.5 graus com sensibilidade ate 4.5 % K-1. Este termometro molecular pode ser processado em filmes finos ou nanoparticulas, abrindo os campos de aplicacao a diferentes utilizacoes. As nanoparticulas de silica produzidas sao caracterizadas na presenca e na ausencia de ioes lantanideos. Sem o metal, as nanoparticulas de APTES/TEOS demonstram ser luminescentes sob excitacao UV sem necessidade de utilizar qualquer tratamento termico. O rendimento quantico de emissao depende apenas da proporcao dos silanos e pode atingir o valor de 0.15 +/- 0.02. A co-dopagem destas nanoparticulas com Eu3+ e Tb3+ permite obter sondas com resposta raciometrica, com a possibilidade de ajustar a gama de temperaturas de operacao e a sensibilidade, via desenho inteligente da matriz de suporte e dos ligandos de beta-dicetona que estao coordenados ao iao metalico. Quando processados como filmes, este termometro permite o mapeamento de temperaturas com resolucao espacial 1.8 mum. A racionalizacao da dependencia de temperatura e uma ferramenta util para desenvolver termometros que operam em gamas de temperatura especificos (e.g. gama de temperatura fisiologica, 290-340 K) com sensibilidade acima de 0.5 % K-1. A combinacao de esforcos de um grande numero de diversas disciplinas ira previsivelmente permitir o surgimento de termometros moleculares novos e sofisticados, preenchendo os principais requisitos das nanociencias.

Microstructural characterization of titanium dental implants by electron microscopy and mechanical tests; Caracterizacao microestrutural de implantes dentarios de titanio por microscopia eletronica e ensaios mecanicos

Energy Technology Data Exchange (ETDEWEB)

Helfenstein, B.; Muniz, N.O.; Dedavid, B.A., E-mail: bruhelfenstein@hotmail.co [Pontificia Univ. Catolica do Rio Grande do Sul (FE/PUC/RS), Porto Alegre, RS (Brazil). Fac. de Engenharia; Gehrke, S.A. [Universidade Federal de Santa Maria (FE/UFSM), RS (Brazil). Fac. de Engenharia; Vargas, A.L.M. [Parque Tecnologico da PUCRS (TECNOPUC/GEPSI), Porto Alegre, RS (Brazil). Grupo de Estudos de Propriedades de Superficies e Interfaces

2010-07-01

Mini screw types for titanium implants, with differentiated design, were tested for traction and torsion for behavior analysis of the shape relative to the requirements of ASTM F136. All implants showed mechanical tensile strength above by the standard requirement, being that 83.3% of them broke above the doughnut, in support of the prosthesis. Distinct morphologies in ruptured by mechanical tests, were obtained. However, both fracture surfaces showed fragile comportments. Metallographic tests, x-ray diffraction (XRD) and microhardness were used for microstructural characterization of material, before and after heat treatment. The presences of {beta} phase in screw surface after quenching treatment proves that the thermal treatment can contribute for mechanical resistance in surface implants. (author)

Application of the ultrashort pulses in bovine dental enamel; Aplicacao de pulsos ultracurtos em esmalte dental bovino

Energy Technology Data Exchange (ETDEWEB)

Todescan, Carla de Rago

2003-07-01

The interaction of lasers with the hard structures of the teeth, has found the excess of heat as a problem for its utilization. This study analyzes, in vitro, the interaction of the ultrashort pulse laser of Ti:safire (830 nm) with the bovine dental enamel. The system consisted in one main oscillator integrated with an amplifier (CPA). The pulses extracted before the temporal compression inside the amplifier had 30 ps, 1000 Hz and {approx}1 mJ. The pulses extracted after the compression had 60 fs, 1000 Hz and {approx}0,7 mJ. The M{sup 2} was 1,3, the focal lens 2,5 cm, the focal distance 29,7 and a computerized translation stage x,y,z. We evaluated the amount of tissue removed per pulse,the resulting cavities and the surrounding tissues not irradiated, under OM and SEM. The fluency was the major factor for differentiating the two regimens studied, therefore, the intensity was not so important as we expected in this process. We found: one ablation region in 'cat tongue', one ablation length, one fluency {approx}0,7 J/cm{sup 2} for 30 ps and {approx}0,5 J/cm{sup 2} for 60 fs (50% of high speed burr), smooth edge for 30 ps and high precision of the sharp edge cut of submicrometric order for 60 fs. (author)

Neural network application for illicit substances identification; Aplicacao de redes neurais para a identificacao de substancias ilicitas

Energy Technology Data Exchange (ETDEWEB)

Nunes, Wallace V.; Silva, Ademir X. da; Crispim, Verginia R.; Schirru, Roberto [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Nuclear

2000-07-01

Thermal neutron activation analysis is based on neutron capture prompt gamma-ray analysis and has been used in wide variety of fields, for examples, for inspection of checked airline baggage and for detection of buried land mines. In all of these applications, the detected {gamma}-ray intensities from the elements present are used to estimate their concentrations. A study about application using a trained neutral network is presented to determine the presence of illicit substances, such as explosives and drugs, carried out in the luggages. The illicit substances emit characteristic detected {gamma}-ray which are the fingerprint of each isotope. The fingerprint data-base of the gamma-ray spectrum of substances is obtained via Monte Carlo N-Particle Transport code, MCNP, version 4B. It was possible to train the neural network to determine the presence of explosives and narcotics even hidden by several materials. (author)

Application of fractional control techniques in petrochemical process; Aplicacao de tecnicas de controle fracionario para processos petroquimicos

Energy Technology Data Exchange (ETDEWEB)

Isfer, Luis A.D.; Lenzi, Marcelo K. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil); Lenzi, Ervin K. [Universidade Estadual de Maringa (UEM), PR (Brazil)

2008-07-01

This work deals with the study of petrochemical process modeling and control using fractional differential equations. This kind of equation has been successfully used in modeling/identification, due to its powerful phenomenological description capability, generalizing conventional/classical models commonly used. Experimental data from literature were used for process identification and the mathematical model obtained, based on fractional differential equations, was the study of servo closed-loop control. Owing to its simplicity, the proportional type controller was used for this task, being able to control the process, keeping its stability, despite off-set. Different controller gains were used for simulation purposes, indicating that the higher the value of K{sub c}, the lower the off-set. (author)

Application of the ultrashort pulses in bovine dental enamel; Aplicacao de pulsos ultracurtos em esmalte dental bovino

Energy Technology Data Exchange (ETDEWEB)

Todescan, Carla de Rago

2003-07-01

The interaction of lasers with the hard structures of the teeth, has found the excess of heat as a problem for its utilization. This study analyzes, in vitro, the interaction of the ultrashort pulse laser of Ti:safire (830 nm) with the bovine dental enamel. The system consisted in one main oscillator integrated with an amplifier (CPA). The pulses extracted before the temporal compression inside the amplifier had 30 ps, 1000 Hz and {approx}1 mJ. The pulses extracted after the compression had 60 fs, 1000 Hz and {approx}0,7 mJ. The M{sup 2} was 1,3, the focal lens 2,5 cm, the focal distance 29,7 and a computerized translation stage x,y,z. We evaluated the amount of tissue removed per pulse,the resulting cavities and the surrounding tissues not irradiated, under OM and SEM. The fluency was the major factor for differentiating the two regimens studied, therefore, the intensity was not so important as we expected in this process. We found: one ablation region in 'cat tongue', one ablation length, one fluency {approx}0,7 J/cm{sup 2} for 30 ps and {approx}0,5 J/cm{sup 2} for 60 fs (50% of high speed burr), smooth edge for 30 ps and high precision of the sharp edge cut of submicrometric order for 60 fs. (author)

Sistema da qualidade, inovação tecnológica e competitividade nas indústrias eletronicas e de software de Curitiba e região metropolitana

OpenAIRE

Camargo, Elizangela Gomes

2008-01-01

Orientador: João Carlos da Cunha Inclui apêndice Dissertação (mestrado) - Universidade Federal do Paraná, Setor de Ciencias Sociais Aplicadas, Programa de Pós-Graduação em Administração. Defesa: Curitiba, 2008 Inclui bibliografia e anexos Área de concentração: Estratégia e organizações

Electronic Paramagnetic Resonance of irradiated nails: challenges for a dosimetry in radiation accidents; Ressonancia Paramagnetica Eletronica de unhas irradiadas: desafios para uma dosimetria em acidentes radiologicos

Energy Technology Data Exchange (ETDEWEB)

Giannoni, Ricardo A., E-mail: giannoni@ird.gov.br [Instituto de Radioprotecao e Dosimetria, (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Rodrigues Junior, Orlando [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2014-07-01

The purpose of this work is to characterize samples of human nails exposed to high doses of radiation, applying the technique of Electron Paramagnetic Resonance (EPR). The objective is to establish a dose response study that allow determine the absorbed dose by exposed individuals in situations of radiological accidents, in a retrospective form. Samples of human nails were collected and afterward irradiated with gamma radiation, and received dose of 20 Gy. The EPR measurement performed on the samples, before irradiation, permitted the signal identification of the components associated with effects caused by the mechanical stress during the fingernail cutting, the so-called mechanically induced signal (MIS). After the irradiation, different species of free radicals were identified, the so-called radiation induced signal (RIS). (author)

Pig lift applications in offshore dry completion wells; Aplicacao do pig lift em pocos offshore de completacao seca

Energy Technology Data Exchange (ETDEWEB)

Lima, Paulo C.R.; Faria, Rogerio Costa; Almeida, Alcino Resende [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

2000-07-01

Production increases of 10% to 130% have been obtained with pig lift installations on offshore oil wells in the Cacao Field, southeast Brazil. At the present time 3 wells out of 5 are being produced with pig lift. These deep, highly deviated wells with little space on the platform to the required surface equipment presented a challenge to pig lift technology. However, these difficulties were overcame and the benefits obtained helped to maintain the economical attractiveness of the platform. (author)

Optimization of surfactant application for synthetic drilling fluid; Otimizacao da aplicacao de emulsificante em fluidos de perfuracao sinteticos

Energy Technology Data Exchange (ETDEWEB)

Arruda, Jefferson Teixeira [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Santos, Telma Pitanga; Medeiros, Ana Catarina da Rocha; Garcia, Rosangela Balaban [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Lab. de Pesquisa em Petroleo

2008-07-01

The most common synthetic drilling fluids are made of polymerized olefins, paraffin and esters, which have absence of aromatics hydrocarbons and biodegradability as advantages. These fluids have good performance during the drilling operations (high thermal stability) and have low toxicity. Nevertheless, their big disadvantage is the high cost, which limits their use. One of the biggest challenges in working with synthetic fluids is the control of water/oil emulsion stability, being the surfactant the main agent responsible for keeping this stability between both phases of the fluid. The water/oil and oil/water emulsion is defined by the chemical nature of the surfactant. The emulsions can be changed from oil/water to water/oil and vice versa by many mechanisms, such as temperature variation, addition of another surfactant and alteration of the disperse phase volumetric percentage. The aim of this work was the optimization of synthetic drilling fluids formulations by using commercial surfactants. The optimized formulations showed similar rheological properties. After aging at high temperature (300 deg F), some tendency to migration of oil phase in both fluids was observed. This result was associated to the fluid's viscosity. However, the formulations showed high electrical stability, indicating formation of stable emulsions. The HTHP filtration volumes were small. (author)

Characterization of application of acu sandstone in ceramic mass; Caracterizacao da aplicacao do arenito acu na massa ceramica

Energy Technology Data Exchange (ETDEWEB)

Nobrega, L.F.P.M.; Souza, M.M.; Gomes, Y.S.; Fernandes, D.L., E-mail: junior.luiz09@hotmail.com [Universidade Federal do Rio Grande do Norte (DIAREN/UFRN), Natal, RN (Brazil). Laboratorio de Processamento Mineral e Residuo

2016-07-01

The sandstone is a sedimentary rock formed mainly by quartz grains. In Rio Grande do Norte, there is the Potiguar Basin with the Jandaira and Acu Formations. The latter consists of thick layers of whitish-colored sandstones. It stands out as a water storage facility in the state, but it is also used for building aggregates. This article aimed at the use of the sandstone of this formation in the ceramic mass for coating. Initially, the material was sampled. It went through the comminution process to achieve the required granulometry. After this, three formulations were made to incorporate this new material into the traditional ones. The methods were performed according to ISO 13816. After sintering at 1200 °C, the specimens were subjected to the physical tests. A positive result was obtained for the use of the Acu sandstone in low concentrations. It is clear, therefore, its use in ceramics for coating.

Geo positioning application in pipeline repair and planning; Planejamento e reparo de dutos com a aplicacao de georreferenciamento

Energy Technology Data Exchange (ETDEWEB)

Sacramento, J. Paulo; S., Sandra A. Cirilo L. da; Freitas, Fabiano A.S. de [TRANSPETRO - PETROBRAS Transportes, Rio de Janeiro, RJ (Brazil)

2003-07-01

The application of geo-position in the repair of pipelines, with the integration of GIS (Geographic Information Systems), inertial pig and GPS (Global Position Systems) make a change and advance in the procedures of correlation for the localization of defects informed by inspection pig. With this new procedure, already in application in pipelines of TRANSPETRO, we are getting profits with the planning to the repair services, through the anticipated knowledge of the places of intervention, reduction of the risks exposition hours in the hollowing of ditches and reduction of up to 25% in the cost of the pipeline repair. (author)

Chitosan-based films composites for wound healing purposes; Filmes compositos de quitosana para aplicacao no revestimento de ferimentos

Energy Technology Data Exchange (ETDEWEB)

Alves, Natali de O.; Silva, Gabriela T. da; Schulz, Gracelie A.S.; Fajardo, Andre R., E-mail: natalioliveiraalves@gmail.com [Universidade Federal de Pelotas (LaCoPol/UFPel), Pelotas, RS (Brazil). Centro de Ciencias Quimicas, Farmaceuticas e de Alimentos. Lab. de Tecnologia e Desenvolvimento de Compositos e Materiais Polimericos

2015-07-01

Chitosan has been extensively applied in the developing of biomaterials due to its desirable good physico-chemical and biological properties. According to this, here films composite of chitosan, poly(vinyl alcohol) and bovine bone powder were prepared by casting willing to be applied in wound healing purposes. Moreover, the first step was the developing of a suitable method to obtain bovine bone powder, which was utilized here as filler. All the materials and films were fully characterized by FTIR, DRX and thermal analysis. Water uptake capacity was measured by swelling assays. (author)

The royalties application on President Kennedy city, Espirito Santo, Brazil; A aplicacao dos royalties em Presidente Kennedy, ES

Energy Technology Data Exchange (ETDEWEB)

Knaak, Fabricio Jose Bassetto; Cardia, Tarik Hajab [Centro Universitario Vila Velha (UVV), ES (Brazil). Curso de Relacoes Internacionais

2008-07-01

This work aims to assemble a study of implementation of royalty in the municipality of President Kennedy - the state of Espirito Santo, showing the disparity between the collection of royalties on oil and quality of infrastructure that the city offers. Based on data the prefecture of the municipality, PNUD and competent bodies, we will show how the money is being used comes from royalties on oil, and what policies the city council's adopting this to apply this feature. (author)

Regenerative electronic load for electric power sources tests using capacitive idling converter; Carga eletronica regenerativa para testes de fontes de energia eletrica utilizando conversor com capacitor flutuante

Energy Technology Data Exchange (ETDEWEB)

Vendrusculo, Edson Adriano

1996-07-01

The conventional method for testing power supplies, batteries, uninterruptible power supply and other sources of electric power uses resistors as load. This results in wasted heat and increases the equipment production cost. This work presents a Regenerative electronic Load to substitute those resistors. The basic topology is a capacitive idling Cuk converter. This converter allows to control independently the input current and permits to provide a sinusoidal output current. An appropriate gate command allows to have some soft-commutation without the use of any auxiliary circuit. The same converter, with input and output changed, can operate as a Power Supply with Input Power Factor Correction. The characteristics of soft-commutation and high efficiency are maintained. A simple high-efficiency transformer allows output isolation. All theoretical results are experimentally verified. (author)

The challenges of working values of SEH (Safety, Environment and Health) in the construction of Urucu / Manaus Gas Pipeline in the Amazon rain forest; Os desafios de trabalhar os valores de SMS (Seguranca, Meio ambiente e Saude) na construcao do Gasoduto Urucu/Manaus na Floresta Amazonica

Energy Technology Data Exchange (ETDEWEB)

Mendes, Jeane Ramos; Rocha, Katia Rosilene Soares da; Paredio, Lindoneide Lima [Concremat Engenharia e Tecnologia, Rio de Janeiro, RJ (Brazil); Pellin, Madson Weider Elgaly [JPTE Engenharia, Sao Jose dos Campos, SP (Brazil); Barreto, Jean Luis Campos [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2008-07-01

This work, aims to sharpen the main difficulties of acting in SMS and the corrective and preventive measures in the work of the pipeline Urucu / Manaus, located in the influence of the Solimoes River, covering several municipalities in the state of Amazonas (Coari, Codajas, Caapiranga, Anama, Iranduba, Manaus). Such pipeline has three spread, namely Spread A, from Urucu to Coari, Spread B1, from Coari to Anama, and Spread B2, from Anama to Manaus. For the purpose of the present case, we have focused on the Spread B2, from the city of Anama to Manaus, from km 475 to Km 662, being 174,400 m long. Its main line ends right within the premises of the Refinaria Isaac Sabba (a local refinery), which is located at Rua Rio Quixito - Distrito Industrial. The purpose of the pipeline is to convey natural gas to the Pressure Regulating Station, which is located close by the aforementioned refinery. The gas is transported to Maua Thermoelectrical, to generate energy for certain areas of the Amazon capital city. The information has been obtained through observations made on the difficulties faced by the workers to comply with safety behaviour while carrying out their activities. Also, by using several tools, such us Auditoria Comportamental (Behaviour Auditing) - Audicomp, Aplicacao de Listas de Verificacao - LV's (Verification Lists), as well as Indice de Praticas Seguras - IPS (Safety Practices Index). The collected data is analysed, and displayed in graphics, tables and processed in PETROBRAS internal systems, such Audicomp (Behaviour Auditing), SALV (Verification Lists Application System), and Auditoria de IPS (Safety Practices Index Auditing). The main difficulties to implement SMS (Safety, Environment and Health) in a pipeline works in the Amazon require from the transportation logistics, communication problems, lack of enough local skilled labor, the adverse region's season conditions, both flood and dry seasons, as well as to commit the local population with

Use of the heat dissipation method for sap flow measurement in citrus nursery trees1 Uso do método de dissipação de calor para a medição do fluxo de seiva em mudas cítricas

Directory of Open Access Journals (Sweden)

Eduardo Augusto Girardi

2010-12-01

precisão das medições. A transpiração estimada a partir da medição do fluxo de seiva foi quatro vezes maior do que a determinada por gravimetria. Microssondas adaptadas a plantas de porte reduzido, ajustes na calibração do método e uso de materiais atóxicos para isolamento térmico do conjunto devem ser futuramente investigados.

Comparative study on sintered alumina for ballistic shielding application; Estudo comparativo entre aluminas sinterizadas visando aplicacao em blindagem balistica

Energy Technology Data Exchange (ETDEWEB)

Melo, Francisco Cristovao Lourenco de; Goncalves, Diniz Pereira [Centro Tecnico Aeroespacial (CTA), Sao Jose dos Campos, SP (Brazil). Inst. de Aeronautica e Espaco

1997-12-31

This work presents a development of the armor made from special ceramic materials and kevlar. An experimental investigation was conducted to study the ballistic penetration resistance on three samples taken from sintered alumina: a commercial one and two formulations A and B made in IAE/CTA. The main differences between the two formulations was the grain size and bend resistance. The knowledge of the mechanisms during the penetration and perforation process allowed to apply a ductile composite laminate made form kevlar under the alumina to delay its rupture. The last ballistic test showed how a Weibull`s modulii and other mechanical properties are able to improve ballistic penetration resistance. (author) 3 refs.

Mixtures of fuels and its application in power generation; Misturas de combustiveis e sua aplicacao na geracao de energia

Energy Technology Data Exchange (ETDEWEB)

Pereira, Roberto Guimaraes; Oliveira, Jorge Luis de; Fernandes Filho, Jorge [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Dept. de Engenharia Mecanica. Programa de Pos-Graduacao em Engenharia Mecanica]. E-mail: temrobe@vm.uff.br; Romeiro, Gilberto Alves [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Dept. de Quimica Organica. Programa de Pos-Graduacao em Quimica Organica]. E-mail: gilbertoromeiro@ig.com.br; Rangel, Ithamar Ribeiro [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil)]. E-mail: ita@epq.ime.eb.br

2004-07-01

The world energy matrix shows a rapidly moving to replace part of fossil fuels by biomass. The demand for diesel fuel, more than any other derivative, is determined a very evasion of foreign exchange through import of crude oil and diesel fuel itself. Within this panorama the diesel fuel becomes critical, because any impediment to imports would bring a immediate reflecting in the country transport system, since this system is based primarily in road transport. Besides, the world's oil reserves are becoming increasingly scarce, them it is imperative that research can be carried out to find alternatives that may minimize or even reach a level of full independence, not just of oil diesel, but also of all oil derivatives. However, if the few changes in traditional spark ignition engines (the gasoline engine) enabled the use of ethanol, first as a mixture and then as full replacement of gasoline, it does not occur in the case of diesel oil. Among the various alternatives for partial replacement of diesel oil, the use of mixtures anhydrous ethanol-diesel stands out as the most simple application, since there is great availability of ethanol and is not needed any change in the original engine. The main problem with this type of alternative is the low solubility of ethanol in diesel fuel, and the little stability that these mixtures have with the change of temperature and humidity environment. One solution to increase the solubility and improve the stability is to use a third substance that, acting as co-solvent, allows levels of mixtures with the best level of stability and higher rates of replacements. Among the various alternatives for use of co-solvents, was chosen initially the butane. Various physical and chemical parameters were evaluated for diesel and for mixtures of fuels.

Environmental compensation application in the oil and gas sector; Aplicacao da compensacao ambiental no segmento de oleo e gas

Energy Technology Data Exchange (ETDEWEB)

Silva, Lucia H.C.; Pollis, Altaira M. [ICF Consultoria do Brasil Ltda., Rio de Janeiro, RJ (Brazil); Oliveira, Marco A.B. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE)

2004-07-01

The regulation of the law no 9.985, of July 18, 2000, by the decree no 4.340, of August 22, 2002, awake the productive sector to the imposition to the entrepreneur that must destine the amount of at least 0,5% of the total costs foreseen for the hole undertaking implementation, to implement or maintain environmental conservation units. The most of the environmental agencies have been applied 0,5%. The IBAMA uses a methodology to establish the impact level and the range between 0,5% and 5% to define the environmental compensation percentage and is questionable. Then, until now, this legal requirement have been applied in a heterogeneous form to the environmental licensing. The various applied criterions, the huge subjectivity in the impact level assessment, and the influence of this requirement in the licensing schedule, associate to the oil and gas sector project costs point to a relevant impact in the feasibility of the oil and gas sector projects. Based in the percentages that IBAMA had established for the oil and gas sector was esteemed some costs destined to the environmental compensation. The law implementation without inhibition of investments in the country depends on the involved sectors articulation. (author)

Application of an exploration index as a focus tool; Aplicacao do indicador de intensidade exploratoria como ferramenta de focalizacao

Energy Technology Data Exchange (ETDEWEB)

Bacoccoli, Giuseppe [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Lab. de Metodos Computacionais em Engenharia (LAMCE); Perez Cuinas Filho, Elio [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Lab. de Modelagem de Bacias (LAB2M)

2004-07-01

The index of intensity of exploration (IE) is here utilized as the ratio between the sedimentary area (in square kilometers) / number of drilled wells (exploratory or total wells). The IE is a very simple and reliable tool and can be used to compare the exploratory efforts in different basins or in different areas of the same sedimentary basin. Considering the set of all the Brazilian sedimentary basins the IE index shows values varying from around 10 (ten) in the Reconcavo, the most explored, up to more than 21,000 (twenty one thousand) in the scarcely explored Parnaiba Basin. Also should be considered some other frontier areas almost unexplored as, for example, the Parecis-Alto Xingu Basin with only two exploratory wells. The average Brazilian IE is very high, around 1,100 (one thousand one hundred). Beyond to perform a complete revision of the IE index in the Brazilian Sedimentary Basin it is also presented an application in some producing basins where the index was applied in different depth categories. By using this method it was also demonstrated that the scarce exploratory efforts where also generally applied to test shallow targets. The average depth of the Brazilian exploratory wells is in fact around 2,300 m (two thousand three hundred meters). The lack of deep wells could have been a negative factor for the proper evaluation of the gas potential in some basins as the Reconcavo. (author)

IMRT Commissioning: application of the AAPM's TG-119; Comissionamento de IMRT: aplicacao do TG-119 da AAPM

Energy Technology Data Exchange (ETDEWEB)

Zeppellini, Caroline; Furnari, Laura, E-mail: laurafurnari@hotmail.com [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Fac. de Medicina. Inst. de Radiologia

2013-08-15

In order to verify the commissioning of the planning of intensity-modulated radiation therapy system (IMRT), the TG-119 of the American Association of Physicists in Medicine (AAPM) was applied. Using pre defined targets and normal structures, plans were realized, absolute and relative dose were measured with an ionizing chamber and films, and the results were compared with planned values. The maximum deviation of the measurements with the ionization chamber was 3,6%, but, in the total eleven measurements, only two were bigger than the tolerance limit of 3%, recommended by TG-119. The number of points which passed criteria gamma 3% to 3 mm ranged between 96.36% and 99.92%, all measurements were within the recommended 95%. The confidence limits found for both film and for chamber were lower than those achieved in the TG-119. Our results showed a good concordance with TG-119, what means that the system is adequate for clinical applications. (author)

Mechanodynamical analysis of nickel-titanium alloys for orthodontics application; Analise mecanodinamica de ligas de niquel-titanio para aplicacao ortodontica

Energy Technology Data Exchange (ETDEWEB)

Arruda, Carlos do Canto

2002-07-01

Nickel-titanium alloys may coexist in more than one crystalline structure. There is a high temperature phase, austenite, and a low temperature phase, martensite. The metallurgical basis for the superelasticity and the shape memory effect relies in the ability of these alloys to transform easily from one phase to another. There are three essential factors for the orthodontist to understand nickel-titanium alloys behaviour: stress; deflection; and temperature. These three factors are related to each other by the stress-deflection, stress-temperature and deflection-temperature diagrams. This work was undertaken with the objective to analyse commercial nickel-titanium alloys for orthodontics application, using the dynamical mechanical analyser - DMA. Four NiTi 0,017 X 0,025'' archwires were studied. The archwires were Copper NiTi 35 deg C (Ormco), Neo Sentalloy F200 (GAC), Nitinol Superelastic (Unitek) and NiTi (GAC). The different mechanodynamical properties such as elasticity and damping moduli were evaluated. Each commercial material was evaluated with and without a 1 N static force, aiming to evaluate phase transition temperature variation with stress. The austenitic to martensitic phase ratio, for the experiments without static force, was in the range of 1.59 to 1.85. For the 1 N static force tests the austenitic to martensitic phase ratio, ranged from 1.28 to 1.57 due to the higher martensite elasticity modulus. With elastic modulus variation with temperature behaviour, the orthodontist has the knowledge of the force variation applied in the tooth in relation to the oral cavity temperature change, for nickel-titanium alloys that undergo phase transformation. The damping capacity of the studied alloys depends on the materials state: martensitic phase; austenitic phase or during phase transformation. The martensitic phase shows higher dumping capacity. During phase transformation, an internal friction peak may be observed for the CuNiTi 35 deg C and Neo Sentalloy F200 alloys. The austenitic phase shows a low damping capacity. According to the evaluation of the damping capacity against temperature, it was possible to better understand the phase transformation behaviour of these alloys. The differential scanning calorimetry was used in order to evaluate the phase transformation process, giving the initial and ending temperatures of the austenitic transformation and the initial and ending temperatures of the martensitic transformation of the studied alloys. (author)

Application of gamma irradiation on forming protein-based edible films; Aplicacao da irradiacao na formacao de filmes comestiveis proteicos

Energy Technology Data Exchange (ETDEWEB)

Sabato, Susy Frey

2000-07-01

In the last decade considerable interest has been addressed to the development of protein-based edible films due to their application in the food industry, as a substitute to traditional plastic films. The use of soy and whey proteins to form those films has been investigated, using heat, chemical and enzymatic processes. Gamma irradiation was recently reported to form caseinate-based edible films, due to the increase of the cohesive strength of the proteins by the formation of cross-links. This work aimed to verify the role of the gamma irradiation in the process of forming edible films from soy protein isolate (SPI) alone and in complex mixtures, that is, mixed with whey protein isolate (WPI), with carbethoxymethyl cellulose (CMC) and with poly(vinyl)alcohol (PVA). Gamma irradiation treatment improved significantly the mechanical properties for all films. The mechanical behavior is strongly related to the formulation, showing synergy between the gamma irradiation and the CMC, mainly for SPI-based films. SPI-based films presented a trend to decrease the water vapor permeability values when irradiated. The CMC addition showed significant improvements on the permeability for films from SPI and from the mixture of SPI with WPI. (author)

Application of biosorbents in treatment of the radioactive liquid waste; Aplicacao de biossorventes no tratamento de rejeitos radioativos liquidos

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Rafael Vicente de Padua

2014-07-01

Radioactive liquid waste containing organic compounds need special attention, because the treatment processes available are expensive and difficult to manage. The biosorption is a potential treatment technique that has been studied in simulated wastes. The biosorption term is used to describe the removal of metals, non-metals and/or radionuclides by a material from a biological source, regardless of its metabolic activity. Among the potential biomasses, agricultural residues have very attractive features, as they allow for the removal of radionuclides present in the waste using a low cost biosorbent. The aim of this study was to evaluate the potential use of different biomass originating from agricultural products (coconut fiber, coffee husk and rice husk) in the treatment of real radioactive liquid organic waste. Experiments with these biomass were made including 1) Preparation, activation and characterization of biomasses; 2) Conducting biosorption assays; and 3) Evaluation of the product of immobilization of biomasses in cement. The biomasses were tested in raw and activated forms. The activation was carried out with diluted HNO{sub 3} and NaOH solutions. Biosorption assays were performed in polyethylene bottles, in which were added 10 mL of radioactive waste or waste dilutions in deionized water with the same pH and 2% of the biomass (w/v). At the end of the experiment, the biomass was separated by filtration and the remaining concentration of radioisotopes in the filtrate was determined by ICP-OES and gamma spectrometry. The studied waste contains natural uranium, americium-241 and cesium-137. The adopted contact times were 30 min, 1, 2 and 4 hours and the concentrations tested ranged between 10% and 100%. The results were evaluated by maximum experimental sorption capacity and isotherm and kinetics ternary models. The highest sorption capacity was observed with raw coffee husk, with approximate values of 2 mg/g of U (total), 40 x 10{sup -6} mg/g of Am-241 and 50 x10{sup -9} mg/g of Cs-137 and, also, with activated coconut fiber, with values of 2 mg/g of U (total), 70 x10{sup -6} mg/g of Am-241 and 40 x10{sup -9} mg/g of Cs-137. The properties evaluated to determine the quality of the immobilization product were free water, mechanical strength, workability and setting time. The best immobilization products for these biomasses were obtained with a water/cement ratio of 0.30, containing 5%, 10% and 15% of raw coffee husk, activated coconut fiber and activated raw coffee husk, respectively. These results suggest that biosorption with raw coffee husk and activated coconut fiber can be applied in the treatment of radioactive liquid organic wastes containing uranium, americium-241 and cesium-137. (author)

Glycerol: a brief history and their application in stereoselective syntheses; Glicerol: um breve historico e aplicacao em sinteses estereosseletivas

Energy Technology Data Exchange (ETDEWEB)

Beatriz, Adilson; Araujo, Yara J.K.; Lima, Denis Pires de, E-mail: adilson.beatriz@ufms.b [Universidade Federal de Mato Grosso do Sul (DQ/UFMS), Campo Grande, MS (Brazil). Dept. de Quimica

2011-07-01

Presently glycerol is considered a co-product of biodiesel industry. As the biodiesel production is exponentially increasing, glycerol generated from the transesterification of vegetable oils and fats is also being produced on a large scale, and turned out to be essential seeking for novel alternatives to the consumption of the extra volume, in crude and/or as derivatives high added value. This review mainly deals with chemical and enzymatic transformations of glycerol to obtain chiral building blocks for synthesis of pharmaceuticals and natural products. (author)

Characteristics of ornamental rocks waste: application of mechanochemical concepts; Caracterizacao de residuos de rochas ornamentais: aplicacao de conceitos mecanoquimicos

Energy Technology Data Exchange (ETDEWEB)

Santos, J. dos; Galembeck, F., E-mail: jsquimica@gmail.com [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Instituto de Quimica

2016-07-01

Processing of ornamental rocks produces up to 80% weight residues which become an environmental problem. In this work, we analyzed residual powders from cutting and crushing granite Cinza Corumba, to study the influence of mechanical processes in the properties of the residues. The powders were characterized by X-ray diffraction and fluorescence, infrared spectroscopy, scanning electron microscopy, surface area determination and adsorption of methylene blue. The same elements and minerals are found in both powders but the powders formed during crushing contain lubricating oil residues, from the crusher. Particle shapes of the crushed powder (surface area 2.85 m2/g) are more irregular than cut powder (surface area 1.98 m2/g). Adsorption of methylene blue is lighter in the crushed powder than in the cutting powder. Thus, the powders analyzed have different surface properties. (author)

Mechanodynamical analysis of nickel-titanium alloys for orthodontics application; Analise mecanodinamica de ligas de niquel-titanio para aplicacao ortodontica

Energy Technology Data Exchange (ETDEWEB)

Arruda, Carlos do Canto

2002-07-01

Nickel-titanium alloys may coexist in more than one crystalline structure. There is a high temperature phase, austenite, and a low temperature phase, martensite. The metallurgical basis for the superelasticity and the shape memory effect relies in the ability of these alloys to transform easily from one phase to another. There are three essential factors for the orthodontist to understand nickel-titanium alloys behaviour: stress; deflection; and temperature. These three factors are related to each other by the stress-deflection, stress-temperature and deflection-temperature diagrams. This work was undertaken with the objective to analyse commercial nickel-titanium alloys for orthodontics application, using the dynamical mechanical analyser - DMA. Four NiTi 0,017 X 0,025'' archwires were studied. The archwires were Copper NiTi 35 deg C (Ormco), Neo Sentalloy F200 (GAC), Nitinol Superelastic (Unitek) and NiTi (GAC). The different mechanodynamical properties such as elasticity and damping moduli were evaluated. Each commercial material was evaluated with and without a 1 N static force, aiming to evaluate phase transition temperature variation with stress. The austenitic to martensitic phase ratio, for the experiments without static force, was in the range of 1.59 to 1.85. For the 1 N static force tests the austenitic to martensitic phase ratio, ranged from 1.28 to 1.57 due to the higher martensite elasticity modulus. With elastic modulus variation with temperature behaviour, the orthodontist has the knowledge of the force variation applied in the tooth in relation to the oral cavity temperature change, for nickel-titanium alloys that undergo phase transformation. The damping capacity of the studied alloys depends on the materials state: martensitic phase; austenitic phase or during phase transformation. The martensitic phase shows higher dumping capacity. During phase transformation, an internal friction peak may be observed for the CuNiTi 35 deg C and Neo Sentalloy F200 alloys. The austenitic phase shows a low damping capacity. According to the evaluation of the damping capacity against temperature, it was possible to better understand the phase transformation behaviour of these alloys. The differential scanning calorimetry was used in order to evaluate the phase transformation process, giving the initial and ending temperatures of the austenitic transformation and the initial and ending temperatures of the martensitic transformation of the studied alloys. (author)

Hybrid membranes PVA/silicon for use in fuel cells; Membranas hibridas de PVA/silica para aplicacao em celula a combustivel

Energy Technology Data Exchange (ETDEWEB)

Aguiar, Liz C.V. de; Almeida, Raquel D. de; Gomes, Ailton de S. [Universidade Federal do Rio de Janeiro - UFRJ, Instituto de Macromoleculas Professora Eloisa Mano - IMA, RJ (Brazil)], e-mail: lizcontino@ima.ufrj.br; Ramos Filho, Florencio G. de [Centro Universitario Estadual da Zona Oeste - UEZO, Rio de Janeiro, RJ (Brazil)

2011-07-01

Hybrids organic-inorganic membranes PVA-silica have been prepared using sol-gel process in situ with the objective of study the influence of inorganic particles incorporation on the water uptake, pervaporation and proton conductivity of PVA membranes. The silica was constituted of mercaptopropyltrimethoxysilane (MPTMS) with or without the mixture with the tetra ethoxysilane (TEOS). The hybrids membranes were oxidated to convert the -SH groups in -SO{sub 3}H groups, becoming them proton conducting. The hybrids membranes not oxidated showed lesser water uptake and pervaporated material, probably, due to the formation of crosslink that restricted the swell of the PVA membrane. The protonic conductivity of the hybrid membranes after the oxidation was up to 26 times bigger than of the membrane not oxidated. (author)

Non-linear nuclear engineering models as genetic programming application; Modelos nao-lineares de engenharia nuclear como aplicacao de programacao genetica

Energy Technology Data Exchange (ETDEWEB)

Domingos, Roberto P.; Schirru, Roberto; Martinez, Aquilino S. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

1997-12-01

This work presents a Genetic Programming paradigm and a nuclear application. A field of Artificial Intelligence, based on the concepts of Species Evolution and Natural Selection, can be understood as a self-programming process where the computer is the main agent responsible for the discovery of a program able to solve a given problem. In the present case, the problem was to find a mathematical expression in symbolic form, able to express the existent relation between equivalent ratio of a fuel cell, the enrichment of fuel elements and the multiplication factor. Such expression would avoid repeatedly reactor physics codes execution for core optimization. The results were compared with those obtained by different techniques such as Neural Networks and Linear Multiple Regression. Genetic Programming has shown to present a performance as good as, and under some features superior to Neural Network and Linear Multiple Regression. (author). 10 refs., 8 figs., 1 tabs.

Production of LiF films for dosimetric thermoluminescence application; Producao de filmes de LiF para aplicacao em dosimetria termoluminescente

Energy Technology Data Exchange (ETDEWEB)

Mauricio, Claudia Lucia de Pinho

2000-12-01

This work studies the LiF monolayer and multilayer polycrystalline film's dosimetric properties. The films were produced by electron beam evaporation technique in aluminium and stainless steel substrates maintained at several temperatures. As dosimetric variable, the intensity of the thermoluminescent (TL) glow curve of the films was used. effects of the substrate type and temperature; of the addition of layers of Mg F{sub 2} NaF and Cu F{sub 2} to the LiF films; and of thermal treatments in the TL response of the produced films were studied. The microstructural characterization of the films was accomplished through measures of scanning electronic microscopy and grazing incidence X-rays diffraction analysis. The dosimetric characterization was made of gamma radiation exposure in a {sup 60} Co source, with kerma from 0,1 to 500 Gy. Studies of reproducibility, homogeneity, stability and other environmental effects were also made. LiF and Cu F{sub 2}: LiF; Mg F{sub 2} films were the only ones that presented mechanical stability and reproducibility of the TL emission. There is a strong indication of some correlation between the residual tension fields inside the films and the intensity of its TL emission peaks. LiF monolayer films present supralinear behaviour from 0,2 to 100 Gy. These films present a main TL glow peak around 150 deg C, whose half-time is about 30 days. Its volumetric sensitivity can reach about 60 times that of LiF powder and about 0,25 that of TLD100 (LiF:Mg, Ti commercial dosimeter from Harshaw Chemical Co.) The homogeneity and reproducibility inside a same film batch is better than 12% for 95% confidence level. Cu F{sub 2} : LiF: Mg F{sub 2} films present linear behaviour from 3 to 500 Gy and its main TL glow peak around 200 deg C did not present any fading for a a period of 30 days, in laboratory conditions. This glow peak is characteristic of the Mg doping of LiF, which confirms the diffusion of Mg ions from the Mg F{sub 2} layer to the LiF layer. The TL volumetric sensitivity of these films is about four times that of LiF powder and about 1% that of TLD 100. The homogeneity and reproducibility inside a same film batch is better than 20% for 95% of confidence level. (author)

Application of gamma irradiation technique for the preservation of propolis; Aplicacao da tecnica de irradiacao gama para preservacao de propolis

Energy Technology Data Exchange (ETDEWEB)

Matsuda, Andrea Harumi

2002-07-01

Irradiation has been recognized as an efficient method for the reduction of deteriorating and pathogenic microorganisms in foods. Propolis is a resinous product made by bees from material processed by the bee's own metabolism and resins from plants. The aim of this work was the application of gamma irradiation technique for the preservation of propolis, because of its efficiency in the reduction of the microbial load. The changes on the total flavonoids content, phenolic compounds and other characteristics required for the qualification and characterization of Brazilian propolis were also analysed. Propolis samples from Juiz de Fora region, Minas Gerais, were irradiated in a {sup 60}Co source, with doses from 0 to 10kGy for the microbiological analyses and 5.0, 7.0 and 10.0kGy for the physico-chemical analyses. The physico-chemical that have been made were: determination of total flavonoids content, semi-quantitative determination of phenolic compounds (artepelin-C, kempferol, chrysin, galangin and quercetin), dry matter analysis, humidity, ash content, mechanical mass and waxes. The ionizing radiation has shown to be efficient in the reduction of the microbial load. Total coliforms determination showed a great reduction with the dose of 3kGy and concerning mesophile aerobic bacteria a systematic reduction was observed, achieving values <10 UFC/g for the dose of 10kGy; similar results was obtained for molds and yeasts. Salmonella assays were negative for all samples. There was no significant alteration on total flavonoids contents nor on the composition of phenolic compounds as a consequence of radiation application at the assayed conditions. The complementary analyses of dry matter and humidity contents, ashes, mechanical mass and waxes did not shown changes after irradiation even with the maximum dose of 10kGy, remaining the results within the standards required by the Brazilian legislation. (author)

Calcium aluminates potential for endodontics and orthopedics applications; Aluminatos de calcio e seu potencial para aplicacao em endodontia e ortopedia

Energy Technology Data Exchange (ETDEWEB)

Santos, G.L. dos; Andrade, T.L.; Oliveira, I.R., E-mail: ivonero@univap.br [Universidade do Vale do Paraiba (UNIVAP), Sao Jose dos Campos, SP (Brazil); Pandolfelli, V.C. [Universidade Federal de Sao Carlos (DEMa/UFSCar), SP (Brazil)

2011-07-01

The mostly used material in the areas of endodontics (MTA, mineral trioxide aggregate) and bone reconstruction (PMMA, polymethyl methacrylate) present some limiting properties requiring thus changes in their compositions as well as the development of alternative materials. In this context, a novel biomaterial-based calcium aluminate cement (CAC) has been studied in order to keep the positive properties and clinical applications of MTA and PMMA, overcoming some their disadvantages. Recent studies involving the use of CAC are based on commercial products consisting of a mixture of phases. Improvements can be attained by searching the synthesis routes of CAC aiming the proper balance between the phases and the control of impurities that may impair its performance in applications in the areas of health. By the optimization of the CAC phases production, this article aims to present their characterization based on hydration temperature; working time and setting time; pH, ions solubilization and dissolution in contact with water and different solutions of simulated body fluid. The results indicated the CA phase as the most suitable for application in the areas of health. (author)

Use of TANDEM methodology for quality control in radiation protection; Aplicacao de metodologia TANDEM para controle de qualidade em radioprotecao

Energy Technology Data Exchange (ETDEWEB)

Mello, O.A.; Oliveira, I.R.; Leyton, F.; Nogueira, M.S., E-mail: mnogueira@cdtn.br [Centro de Desenvolvimeto da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Borges, F.L.S., E-mail: flavialuizaborges@yahoo.com.br [Vigilancia Sanitaria de Minas Gerais, Belo Horizonte, MG (Brazil); Joana, G.S., E-mail: georgia.joana@gmail.com [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil)

2014-07-01

Recent studies have indicated the increase of the incidence of lens opacities for low radiation doses. Considering epidemiological data, the International Commission on Radiological Protection (ICRP) issued a statement that changed the absorbed dose threshold for the eye lens. The statement also recommends a reduction in the dose limits to the eye lens for occupationally exposed persons; now it is considered to be 20 mSv in a year averaged over five years. For this research two types of thermoluminescent dosimeters TL were used in the construction of the curve tandem. (LiF-100H e LiF-200). For system calibration three monitors were irradiated for each radiation beam. The monitors were irradiated with 4 mGy kerma at 1.5 m from the focal point. The Tandem curve was obtained by the ratio between the values of the energy dependence curves of each dosimeter. Data obtained for the corresponding x-ray beams to radiation reference N60 to N120 are more accurate for determining the energy - steepest part of the curve. The results are shown similar to similar studies and confirm the possibility of using the method for determining the unknown energy radiation fields. (author)

DCS (Digital Control System) application of three generations; Aplicacao de um SDCD (Sistemas Digitais de Controle Distribuido) de tres geracoes

Energy Technology Data Exchange (ETDEWEB)

Coelho, Celso Roberto Molinaro [PETROBRAS S.A., Sao Jose dos Campos, SP (Brazil). Refinaria Henrique Lage (REVAP)

2004-07-01

Digital Control System are three generations of hardware and software platforms in process automation , but DCS is using the same functions and presents the reliability and availability . The challenge in automation has to maintain the old and the newest system operating and integrated perhaps the different times of platforms to guarantee the actual investments and in the future. A new generation of DCS using field equipment to control or the actual architecture with a lot of new information are coming with the technologies. (author)

Energy assessment of nitrogen variable rate fertilization on wheat; Analise energetica da aplicacao de nitrogenio em taxa variavel em trigo

Energy Technology Data Exchange (ETDEWEB)

Colaco, A.F.; Karam, E.H.; Romanelli, T.L.; Molin, J.P. [Escola Superior de Agricultura Luiz Queiroz (ESALQ/USP), Piracicaba, SP (Brazil). Dept. de Engenharia de Biossistemas], Email: andrecolaco@usp.br; Povh, F.P. [Fundacao ABC Pesquisa e Desenvolvimento Agropecuario, Castro, PR (Brazil)

2011-07-01

Precision Agriculture (PA) is a technique that can reduce the inputs utilization in agriculture production, including the nitrogen fertilizer consume. Great importance is given to this fertilizer, due to its contribution on energy input in agriculture. Methodologies based on the calculation of energy flow of agriculture systems are capable to identify management practices that use energy more efficiently. So, this study's objective is to evaluate the variable-rate nitrogen fertilization on wheat, using energy assessment. This study was carried on in two wheat fields, in which the fertilization was done adopting strips alternated by conventional method (single nitrogen dose) and by nitrogen variable-rate technology. Thus, the input and output energy in the system, energy balance, energy return on investment (EROI) and incorporated energy were determined for each geo-referenced point within the fields. Results showed that less energy was demanded when using variable-rate technology, due to the nitrogen saving, providing greater energy balance, EROI and lower incorporated energy on the areas managed using PA. The energy assessment showed to be an important tool to evaluate systems that use PA, because it is capable of monitoring crops energy potential. (author)

Pipeline integrity management using Monte Carlo simulation; A aplicacao do metodo de Monte Carlo no gerenciamento da integridade de dutos

Energy Technology Data Exchange (ETDEWEB)

Garcia, Claudio; Costa, Artur; Bittencourt, Euclides [TRANSPETRO - PETROBRAS Transporte, Rio de Janeiro, RJ (Brazil)

2005-07-01

Due to the growing relevance of safety and environmental protection policies in PETROBRAS and its subsidiaries, as well as official regulatory agencies and population requirements, integrity management of oil and gas pipelines became a priority activity in TRANSPETRO, involving several sectors of the company's Support Management Department. Inspection activities using intelligent PIGs, field correlations and replacement of pipeline segments are known as high cost operations and request complex logistics. Thus, it is imperative the adoption of management tools that optimize the available resources. This study presents Monte Carlo simulation method as an additional tool for evaluation and management of pipeline structural integrity. The method consists in foreseeing future physical conditions of most significant defects found in intelligent PIG In Line Inspections based on a probabilistic approach. Through Monte Carlo simulation, probability functions of failure for each defect are produced, helping managers to decide which repairs should be executed in order to reach the desired or accepted risk level. The case that illustrates this study refers to the reconditioning of ORSOL 14'' (35,56 mm) pipeline. This pipeline was constructed to transfer petroleum from Urucu's production fields to Solimoes port, in Coari, city in Brazilian Amazon Region. The result of this analysis indicated critical points for repair, in addition to the results obtained by the conventional evaluation (deterministic ASME B-31G method). Due to the difficulties to mobilize staff and execute necessary repairs in remote areas like Amazon forest, the probabilistic tool was extremely useful, improving pipeline integrity level and avoiding future additional costs. (author)

Study of mural paintings by Fulvio Pennacchi in São Paulo City by mineralogical techniques

Directory of Open Access Journals (Sweden)

Eliane A. Del Lama

2009-03-01

Full Text Available The present research deals with two mural paintings made in 1947 with the fresco technique by Fulvio Pennacchi in the Catholic Chapel of the Hospital das Clínicas (São Paulo City, Brazil, namely the Virgin Annunciation and the Supper at Emmaus. This study regards the materials and painting techniques used by the artist, based on historical research,on in situ observations and laboratory analytical techniques (stereomicroscopy,scanning electron microscopy with an energy dispersive spectrometer, X-ray diffractometry, electron microprobe, images obtained with UV-light, aiming to improve the methods of characterization of objects of our cultural heritage, and to enhance its preservation accordingly. The results lead to the identification of the plaster components and of distinct layers in the frescoes, besides further information on grain size, impurities and textures, composition of pigments, and features of deterioration, such as efflorescences. The degree of degradation of the murals painting was assessed by this way. Our data suggest that a single layer of plaster was used by Pennacchi, as a common mortar with fine- and medium-grained aggregates. Differences in texture were obtained by adding gypsum to the plaster.A presente pesquisa trata de duas pinturas murais feitas em 1947 por Fulvio Pennacchi com a técnica do afresco na Capela Católica do Hospital das Clínicas (São Paulo, Brasil, intituladas Anunciação da Virgem e Ceia de Emaús. Este estudo considera os materiais e as técnicas de pintura usadas pelo artista, baseado na pesquisa histórica, observações in situ e técnicas analíticas de laboratório (estereomicroscopia, microscopia eletrônica de varredura com detector de espectro de energia dispersiva, difração de raios X, microssonda eletrônica, imagens obtidas com luz ultravioleta, visando aperfeiçoar os métodos de caracterização de objetos do nosso patrimônio cultural, e otimizar sua preservação adequadamente. Os

Magnetic nanoparticles for cancer therapy; Nanoparticulas magneticas para o tratamento do cancer

Energy Technology Data Exchange (ETDEWEB)

Bakuzis, Andris F. [Universidade Federal de Goias (UFG), Goiania, GO (Brazil). Instituto de Fisica

2014-07-01

terapeutico para esta inovadora tecnica nao invasiva e altamente localizada. Nesta palestra iremos discutir resultados da literatura e do nosso proprio grupo no tratamento de cancer usando a hipertermia magnetica. Diversos tipos de nanoparticulas magneticas sugeridas para esta aplicacao serao apresentados assim como a evolucao historica deste tratamento, que apesar de ter sido sugerido em meados da decada de 50, so mais recentemente foi aprovado na Europa para tratamento de seres humanos com tumores do cerebro. (author)

Transmission electron microscopy of aged Ti-10Mo-20Nb alloy after hot swaging; Microscopia eletronica de transmissao da liga Ti-10Mo-20Nb envelhecida apos forjamento a quente

Energy Technology Data Exchange (ETDEWEB)

Gabriel, Sinara Borborema, E-mail: sinarab@msn.com [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil); Baldan, Renato, E-mail: renatobaldan@gmail.com [Universidade de Sao Paulo (EEL/USP), Lorena, SP (Brazil). Escola de Engenharia; Torres, Juliana; Oliveira, Nathalia Rodrigues, E-mail: juliana_torres_5@hotmail.com, E-mail: nathalia_roliveira@yahoo.com.br [Centro Universitario de Volta Redonda (UNIFOA), Volta Redonda, RJ (Brazil); Nunes, Carlos Angelo; Mei, Paulo Roberto, E-mail: cnunes@demar.eel.usp.br, E-mail: pmei@fem.unicamp.br [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil)

2014-08-15

Ti alloys are widely used in biomedical applications. Within this class, metastable β -Ti alloys stand, because through thermomechanical processing it is possible to obtain mechanical properties and in particular one suitable Young's modulus for biomedical applications. These alloys require high mechanical strength and a low Young's modulus to avoid stress shielding. Preliminary studies showed that the microstructure of the Ti-10Mo- 20Nb alloy after cold forging and aging 500 °C/24 h consisted in bimodal distribution of α phase in the β matrix. The aim of this study was to characterize the microstructure of Ti-10Mo-20Nb alloy after hot forging and aging at 500 °C for 24 hours. Microstructural characterization consisted of analyzes by X-ray diffraction and transmission electron microscopy. According to the results, while the cold forging resulted in a bimodal α distribution in the β matrix, hot forging resulted in a thin and homogeneous α precipitation in the β matrix. (author)

Transmission electron microscopy of Ti-12Mo-13Nb Alloy aged after heat forging; Microscopia eletronica de transmissao da liga Ti-12Mo-13Nb envelhecida apos forjamento a quente

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Nathalia Rodrigues [Centro Universitario de Volta Redonda (UNIFOA), Volta Redonda, RJ (Brazil); Baldan, Renato [Universidade de Sao Paulo (USP), Lorena, SP (Brazil). Escola de Engenharia; Nunes, Carlos Angelo; Mei, Paulo Roberto [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil); Gabriel, Sinara Borborema [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil)

2014-06-15

Metastable β-Ti alloys possess mechanical properties, in particular a elastic modulus that depends not only on its composition but also the applied thermomechanical treatments. These alloys require high mechanical strength and a low Young’s modulus to avoid stress shielding. Preliminary studies on the development of Ti- 13Nb-12Mo alloy showed than the better properties were obtained at aged at 500 ° C / 24 h after cold forging , whose microstructure consisted of bimodal α phase in the β matrix. In this work, Ti-12Mo-13Nb alloy was heat forged and aged at 500 deg C for 24h and the microstructure was analyzed by employing X-ray diffraction and transmission electron microscopy. According to the results, while the cold forging resulted in bimodal α phase in the β matrix, hot forging resulted in a fine and homogeneous α phase in the β matrix. (author)

Treatment of chemical waste piassava for application in polymeric composites; Tratamento quimico do residuo de piacava para aplicacao em compositos polimericos

Energy Technology Data Exchange (ETDEWEB)

Miranda, C.S.; Fiuza, R.P.; Guimaraes, D.H.; Carvalho, G.G.P.; Carvalho, R.F.; Jose, N.M., E-mail: cleidienesm@gmail.co [Universidade Federal da Bahia (GECIM/UFBA), Salvador, BA (Brazil). Inst. de Quimica. Grupo de Energia e Ciencias dos Materiais

2010-07-01

Piassava fibers were investigated with the aim of adding new business value. The surface of the fibers were treated with NaOH and H{sub 2}SO{sub 4} for 1 h at room temperature. The samples were characterized by FTIR, TGA, DSC, chemical composition, XRD, SEM and tensile tests. The micrographs of the fibers showed that treatment with NaOH cleaned the fiber surface of a large amount of impurities and cause fibrillation. Chemical analysis, using the Van Soest method, showed that the palm fiber is a fiber rich in lignin, as evidenced by their brown color and with alkali treatment there was partial removal of hemicellulose and lignin, increasing the crystallinity index of the fiber, observed by XRD. The acid treatment caused no significant changes in the properties of the fiber. Therefore, the mercerisation was efficient in the fiber of palm fiber, improving their properties, enabling thus their use as reinforcement in polymer composites. (author)

Polyester synthesis for application in PEMFC type fuel cells; Sintese de poliester para aplicacao em celulas a combustivel do tipo PEM

Energy Technology Data Exchange (ETDEWEB)

Fiuza, R.P.; Souza, D.R. de; Fiuza, R.A.; Jose, N.M.; Boaventura, J.S. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Inst. de Quimica], e-mail: raigenis@gmail.com

2006-07-01

The PEMFC (Proton Exchange Membrane Fuel Cell), along the SOFC (Solid Oxide Fuel Cell), is the most important technology, among the various types of fuels cell. The PEMFC shows a large versatility of applications, both for stationary and mobile use. However the PEMFC presents high manufacture cost, directly impacting in the cost of the produced energy. This work contemplates the previews sulfonation of phtalic acid and its subsequent polymerization with glycerol, using as catalytic tin dibutyl-dilaurate. The obtained material has been characterized by DSC, TGA, FTIR, MEV, DRX and XRF. The gotten results indicated that phtalic acid was sulfonated and the increase of the sulfonation degree significantly increased the crystallinity of the sulfonated ftalico acid. Furthermore, the polymer produced from the sulfonated monomer presented adequate thermal resistance and a high content of conducting groups, necessary conditions for application as electrolyte in PEMFC. All these characteristics, particularly the low cost of the reagents and the ease of production process, make the sulfonated polyester membrane a promising candidate as fuel cell electrolyte. (author)

Radionecrosis attenuation in wistar rats with cutaneous application of quercetin; Atenuacao da radionecrose em ratos Wistar com aplicacao cutanea de quercetina

Energy Technology Data Exchange (ETDEWEB)

Alves, Nelson Mendes

2016-11-01

The increased incidence of cancer has been significant in recent decades in the world population, as confirmed by national and international institutions in the health area. The emergence of cancer is influenced, predominantly by genetic and environmental factors, being manifested more in the adult population. The main modalities for cancer treatment (radiotherapy, chemotherapy and surgery) may be used separately or in combination, depending on the type of cancer. Among the methods mentioned, radiation therapy is the one more broadly used for the treatment of patients, having an associated side effect called radiodermatitis, which has degrees of severity ranging from simple erythema to radionecrosis. The manifestation of radiodermatitis may occur during the treatment or after the radiotherapy sessions: both situations have great relevance in the patient's quality of life and social costs. One of the studied alternative therapies for attenuating the radionecrosis is the quercetin cutaneous application. One of the alternative therapies, studied to mitigate or eliminate the radionecrosis, is based on the topical application of quercetin. To evaluate the effectiveness of this mitigation, an animal model of radionecrosis was developed, to be used in Wistar rats. After in vitro studies, the quercetin concentrations and time of application were determined, reducing the number of animals, when in vivo experiments are carried out. With the topical application of 250 μ mol/L of quercetin, one hour prior to gamma irradiation, at a dose of 85 Gy, the side effects of radiation were minimized, avoiding the formation of radionecrosis. There was, also, a tendency to attenuate the wound area in the studied animals, compared to the irradiated animals without the quercetin application. (author)

Application of macrophytes as biosorbents for radioactive liquid waste treatment; Aplicacao de macrofitas como biossorventes no tratamento de rejeitos radioativos liquidos

Energy Technology Data Exchange (ETDEWEB)

Vieira, Ludmila Cabreira

2016-07-01

Radioactive waste as any other type of waste should be treated and disposed adequately. It is necessary to consider its physical, chemical and radiological characteristics for choosing the appropriate action for the treatment and final disposal. Many treatment techniques currently used are economically costly, often invalidating its use and favoring the study of other treatment techniques. One of these techniques is biosorption, which demonstrates high potential when applied to radioactive waste. This technology uses materials of biological origin for removing metals. Among potential biosorbents found, macrophyte aquatics are useful because they may remove uranium present in the liquid radioactive waste at low cost. This study aims to evaluate the biosorption capacity of macrophyte aquatics Pistia stratiotes, Limnobium laevigatum, Lemna sp and Azolla sp in the treatment of liquid radioactive waste. This study was divided into two stages, the first one is characterization and preparation of biosorption and the other is tests, carried out with uranium solutions and real samples. The biomass was tested in its raw form and biosorption assays were performed in polypropylene vials containing 10 ml of solution of uranium or 10ml of radioactive waste and 0.20g of biomass. The behavior of biomass was evaluated by sorption kinetics and isotherm models. The highest sorption capacities found was 162.1 mg / g for the macrophyte Lemna sp and 161.8 mg / g for the Azolla sp. The equilibrium times obtained were 1 hour for Lemna sp, and 30 minutes for Azolla sp. With the real waste, the macrophyte Azolla sp presented a sorption capacity of 2.6 mg / g. These results suggest that Azolla sp has a larger capacity of biosorption, therefore it is more suitable for more detailed studies of treatment of liquid radioactive waste. (author)

Phosphogypsum applications in the cerrado agriculture and his radiological implications; Aplicacao do fosfogesso na agricultura do cerrado e suas implicacoes radiologicas

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Kerley Alberto Pereira de

2008-07-01

The rate of generation of phosphogypsum is approximately 4.8 tons for each ton of phosphoric acid produced. The annual world production can be estimated at 150 million of tons. It is classified as NORM (Naturally Occurring Radioactive Material), in other words, it is a solid waste that contains radioactive elements of natural occurrence from the source rock. The large amount of phosphogypsum produced has been attracting attention of radiological protection institutions and environmental protection agencies in the world, given its high potential for contamination of the environment. In Brazil, this material has been used for several decades, especially for agricultural purposes. In this case, the phosphogypsum is used as a source of calcium and sulfur, as conditioner, and for correction of subsurface soil saturated with sodium, potassium and aluminum. Due to the presence of radionuclides in phosphogypsum, it is necessary to understand the mechanisms for transferring of natural radionuclides in the system soil/plant and to evaluate if the use of phosphogypsum in soil contributes to increased exposition of humans to the natural radioactivity. Experiments were accomplished in a greenhouse with lettuce cultivation in two types of soil (sandy and loamy) fertilized with four different amounts of of phosphogypsum. Samples of phosphogypsum, soil, lettuce and drainage water were analyzed being determined the radionuclides of interest ({sup 238}U, {sup 232}Th, {sup 226}Ra, {sup 228}Ra, {sup 2}'1'0Pb and {sup 210}Po). {sup 238}U and {sup 232}Th have been carried out by neutron activation analysis, Ra, Ra and Pb by gamma spectrometry and Po by alpha spectrometry techniques. Finally, Transfer Factor of soil-plant was calculated and the annual contribution to the effective dose committed due to the ingestion of lettuces of the experiment. Analyses of chemical, physical and mineralogical characterization of soil and phosphogypsum samples were also accomplished. The phosphogypsum was classified as Class II A - Not Dangerous, Not Inert, Not Corrosive and Not Reactive. The soil samples analyzed as were acids, with low content of organic matter and high potential acidity. The average of specific activity for {sup 226}Ra in phosphogypsum samples (252 Bq.kg{sup -1}) was below of the maximum level recommended by USEPA, which is 370 Bq.kg{sup -1} for agricultural use. Although the most of the results of mean specific activity of radionuclides present in samples of lettuce present values below the Minimum Detectable Activity (MDA), the Transfer Factors were estimated for those conditions in which the mean specific activity proved to be superior to MDA. The values ranges from 1.8 10{sup -3} to 2.3 10{sup -2} for {sup 232}Th; 3.5 10{sup -2} to 4.1 10{sup -2} for {sup 226}Ra, 2.4 10{sup -1} to 3.2 10{sup -1} for {sup 228}Ra and 3.5 10{sup -2} to 8.5 10{sup -2} for {sup 210}Po, depending on the type of soil used in the planting of the vegetables. In general, the results obtained in the present study indicated that the mobility of radionuclides in both studied soils was low. The effective doses committed calculated well below the limit of 1 mSv.year{sup -1} established by ICRP, for the public in general (4,3 10{sup -3} mSv for the experiments in loamy soil and 7,5 10{sup -3} mSv for the experiments in sandy soil). It is possible to conclude that from the point of view of the radiological protection, the data obtained in this work demonstrated the viability of the use of phosphogypsum in agriculture of the Cerrado, Brazil. (author)

Development of a pilot molecular distillation unit; Desenvolvimento de unidade de destilacao molecular nacional e aplicacao na avaliacao de petroleos extrapesados

Energy Technology Data Exchange (ETDEWEB)

Rocha, Erica Roberta Lovo da; Maciel, Maria Regina Wolf; Maciel Filho, Rubens; Batistella, Cesar Benedito [Universidade Estadual de Campinas (UNICAMP), SP (Brazil); Medina, Lilian Carmem [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

2008-07-01

Due to the importance and the need in studies with heavy and extra heavy petroleums and their residues, it was designed and built up by the oil research group of LOPCA/LDPS/FEQ/UNICAMP, in partnership with the Laboratory of Valuation Processes of CENPES / PETROBRAS, a pilot plant of falling film molecular distiller (national prototype), where some specific operational facilities were introduced. This project resulted in a suitable system for distillation of products of high molecular weight and thermally sensitive, without degradation of them. This work aims the achievement of distillate fractions of atmospheric residue 400 deg C+, using the new molecular distillation equipment. The experiments were carried out according to factorial design to assess the significant process variables in the molecular distillation prototype. The results showed that the evaporator temperature has high influence on the process and the feed flow rate has minimum influence, as it is desired. Additionally, the equipment showed easy handing operation, high operational stability and results varying around 1%. (author)

Phosphogypsum applications in the cerrado agriculture and his radiological implications; Aplicacao do fosfogesso na agricultura do cerrado e suas implicacoes radiologicas

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Kerley Alberto Pereira de

2008-07-01

The rate of generation of phosphogypsum is approximately 4.8 tons for each ton of phosphoric acid produced. The annual world production can be estimated at 150 million of tons. It is classified as NORM (Naturally Occurring Radioactive Material), in other words, it is a solid waste that contains radioactive elements of natural occurrence from the source rock. The large amount of phosphogypsum produced has been attracting attention of radiological protection institutions and environmental protection agencies in the world, given its high potential for contamination of the environment. In Brazil, this material has been used for several decades, especially for agricultural purposes. In this case, the phosphogypsum is used as a source of calcium and sulfur, as conditioner, and for correction of subsurface soil saturated with sodium, potassium and aluminum. Due to the presence of radionuclides in phosphogypsum, it is necessary to understand the mechanisms for transferring of natural radionuclides in the system soil/plant and to evaluate if the use of phosphogypsum in soil contributes to increased exposition of humans to the natural radioactivity. Experiments were accomplished in a greenhouse with lettuce cultivation in two types of soil (sandy and loamy) fertilized with four different amounts of of phosphogypsum. Samples of phosphogypsum, soil, lettuce and drainage water were analyzed being determined the radionuclides of interest ({sup 238}U, {sup 232}Th, {sup 226}Ra, {sup 228}Ra, {sup 2}'1'0Pb and {sup 210}Po). {sup 238}U and {sup 232}Th have been carried out by neutron activation analysis, Ra, Ra and Pb by gamma spectrometry and Po by alpha spectrometry techniques. Finally, Transfer Factor of soil-plant was calculated and the annual contribution to the effective dose committed due to the ingestion of lettuces of the experiment. Analyses of chemical, physical and mineralogical characterization of soil and phosphogypsum samples were also accomplished. The phosphogypsum was classified as Class II A - Not Dangerous, Not Inert, Not Corrosive and Not Reactive. The soil samples analyzed as were acids, with low content of organic matter and high potential acidity. The average of specific activity for {sup 226}Ra in phosphogypsum samples (252 Bq.kg{sup -1}) was below of the maximum level recommended by USEPA, which is 370 Bq.kg{sup -1} for agricultural use. Although the most of the results of mean specific activity of radionuclides present in samples of lettuce present values below the Minimum Detectable Activity (MDA), the Transfer Factors were estimated for those conditions in which the mean specific activity proved to be superior to MDA. The values ranges from 1.8 10{sup -3} to 2.3 10{sup -2} for {sup 232}Th; 3.5 10{sup -2} to 4.1 10{sup -2} for {sup 226}Ra, 2.4 10{sup -1} to 3.2 10{sup -1} for {sup 228}Ra and 3.5 10{sup -2} to 8.5 10{sup -2} for {sup 210}Po, depending on the type of soil used in the planting of the vegetables. In general, the results obtained in the present study indicated that the mobility of radionuclides in both studied soils was low. The effective doses committed calculated well below the limit of 1 mSv.year{sup -1} established by ICRP, for the public in general (4,3 10{sup -3} mSv for the experiments in loamy soil and 7,5 10{sup -3} mSv for the experiments in sandy soil). It is possible to conclude that from the point of view of the radiological protection, the data obtained in this work demonstrated the viability of the use of phosphogypsum in agriculture of the Cerrado, Brazil. (author)

Production of muscovite-feldspathic glass composite: scanning electron microscopy and X-ray diffraction analysis; Producao de composito moscovita-vidro feldspatico: microscopia eletronica de varredura e analise de difracao de raios X

Energy Technology Data Exchange (ETDEWEB)

Costa, F.P.F.; Ogasawara, T.; Santos, S.F. [Universidade Federal do Rio de Janeiro (PEMM/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao em Engenharia. Programa de Engenharia Metalurgica e de Materiais; Franca, S.C.A.; Barbato, C.N [Centro de Tecnologia Mineral(CETEM/MCT), Rio de Janeiro, RJ (Brazil)

2009-07-01

The objective of this work was to find the sintering conditions for the feldspathic glass + muscovite mixture to produce a dense composite block for manufacturing dental prosthesis by using CAD-CAM. Each 20g of the glass-frit had : 15.55g of Armil-feldspar; 0.53g of Al{sub 2}O{sub 3}; 1.56g of Na{sub 2}CO{sub 3}; 0.5g of borax; 1.74g of K{sub 2}CO{sub 3}; 0.13g of CeO{sub 2}. Frit's powder finer than 350 Tyler mesh was mixed with 0 wt%, 10 wt%, 20 wt% and 100 wt% of muscovite pressed cylinders (5600 pounds force) 16mm in diameter and sintered under vacuum Vacumat (VITA) furnace at 850 deg C, 900 deg C, 950 deg C, 1000 deg C, 1050 deg C, 1100 deg C and 1150 deg C. X-ray diffraction analysis and scanning electron microscopy were carried out. The necessary temperature for high densification depended on the composition of the mixture: 850 deg C (for pure frit); 1050 deg C (for 10 wt% mica) and 1150 deg C (for 20 wt% mica); pure mica degraded during sintering. (author)

Electron paramagnetic resonance study on the ionizing radiation induced defects of the tooth enamel hydroxyapatite; Estudo por ressonancia paramagnetica eletronica de defeitos induzidos pelas radiacoes ionizantes na hidroxiapatita do esmalte dentario

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Liana Macedo de

1995-01-01

Hydroxyapatite is the main constituent of calcified tissues. Defects induced by ionizing radiations in this biomineral can present high stability and then, these are used as biological markers in radiological accidents, irradiated food identifying and geological and archaeological dating. In this work, paramagnetic centers induced on the enamel of the teeth by environmental ionizing radiation, are investigated by electron paramagnetic resonance (EPR). Decay thermal kinetic presents high complexity and shows the formation of different electron ligation energy centers and structures 65 refs., 40 figs., 5 tabs.

Calculation of the electronic and magnetic structures of 3d impurities in the Hcp Fe matrix; Calculo da estrutura eletronica e magnetica de impurezas 3d na matriz do Fe HCP

Energy Technology Data Exchange (ETDEWEB)

Franca, Fernando

1995-12-31

In this work we investigate the local magnetic properties and the electronic structure of HCP Fe, as well introducing transition metals atoms 3d (Cs, Ti, Cr, Mn, Co, Ni, Cu, Zn) in HCP iron matrix. We employed the discrete variational method (DVM), which is an orbital molecular method which incorporate the Hartree-Fock-Slater theory and the linear combination of atomic orbitals (LCAO), in the self-consistent charge approximation and the local density approximation of Von Barth and Hedin to the exchange-correlation potential. We used the embedded cluster model to investigate the electronic structure and the local magnetic properties for the central atom of a cluster of 27 atoms immersed in the microcrystal representing the HCP Fe. (author) 32 refs., 19 figs., 2 tabs.

Application of the FDK algorithm for multi-slice tomographic image reconstruction; Aplicacao do algoritmo FDK para a reconstrucao de imagens tomograficas multicortes

Energy Technology Data Exchange (ETDEWEB)

Costa, Paulo Roberto, E-mail: pcosta@if.usp.b [Universidade de Sao Paulo (IFUSP), SP (Brazil). Inst. de Fisica. Dept. de Fisica Nuclear; Araujo, Ericky Caldas de Almeida [Fine Image Technology, Sao Paulo, SP (Brazil)

2010-08-15

This work consisted on the study and application of the FDK (Feldkamp- Davis-Kress) algorithm for tomographic image reconstruction using cone-beam geometry, resulting on the implementation of an adapted multi-slice computed tomography system. For the acquisition of the projections, a rotating platform coupled to a goniometer, an X-ray equipment and a digital image detector charge-coupled device type were used. The FDK algorithm was implemented on a computer with a Pentium{sup R} XEON{sup TM} 3.0 processor, which was used for the reconstruction process. Initially, the original FDK algorithm was applied considering only the ideal physical conditions in the measurement process. Then some artifacts corrections related to the projections measurement process were incorporated. The implemented MSCT system was calibrated. A specially designed and manufactured object with a known linear attenuation coefficient distribution ({mu}(r)) was used for this purpose. Finally, the implemented MSCT system was used for multi-slice tomographic reconstruction of an inhomogeneous object, whose distribution {mu}(r) was unknown. Some aspects of the reconstructed images were analyzed to assess the robustness and reproducibility of the system. During the system calibration, a linear relationship between CT number and linear attenuation coefficients of materials was verified, which validate the application of the implemented multi-slice tomographic system for the characterization of linear attenuation coefficients of distinct several objects. (author)

Application of reject of gypsum from Trindade/PE in ceramic masses formulations; Aplicacao de residuos de gipsita em formulacoes de massas ceramicas

Energy Technology Data Exchange (ETDEWEB)

Lima, Thalles Confessor de; Souza, Marcondes Mendes de; Almeida, Ana Beatriz Dantas de; Farias, Debora Santos Umbelino de; Nobrega, Luiz Felipe Pereira de Medeiros, E-mail: thallesconfessor@yahoo.com.br [Instituto Federal de Educacao, Ciencia e Tecnologia do Rio Grande do Norte (IFRN), Mossoro, RN (Brazil); Mendes, Luciana Bezerra [Fundacao de Apoio a Pesquisa do Rio Grande do Norte (FAPERN), Natal RN (Brazil)

2016-07-01

The mining industry is a major producer of waste is to be harmful to the environment besides not being made possible for use in producing means, since the product of economic interest has been extracted. In order to reduce this problem, this work shows the characterization of the waste generated by gypsum mining in Trindade/PE in the ceramic coating. The residue was collected, ground and sieved to #200, then was chemically characterized by XRF analysis process, to evaluate its potential to be incorporated into the formulation of ceramic material, the material studied can be used in porcelain tile formulation as a flux element for that were obtained in the laboratory ceramic bodies adding the residue then were performed physical testing of linear shrinkage, water absorption and flexural breaking strain technically order to evaluate the addition of this residue ceramic coating. (author)

Development of Ti-12Mo-3Nb alloy for biomedical application; Desenvolvimento da liga Ti-12Mo-3Nb para aplicacao biomedica

Energy Technology Data Exchange (ETDEWEB)

Panaino, J.V.P.; Gabriel, S.B., E-mail: josevicentepanaino@hotmail.co [Centro Universidade de Volta Redonda (UNIFOA), RJ (Brazil); Mei, P. [Universidade Estadual de Campinas (DEMa/UNICAMP), SP (Brazil). Dept. de Materiais; Brum, M.V. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Programa de Engenharia Metalurgica e de Materiais; Nunes, C.A. [Universidade de Sao Paulo (EEL/USP), Lorena, SP (Brazil). Escola de Engenharia

2010-07-01

The titanium alloys are quite satisfactory for biomedical applications due to their physical, mechanical and biological properties. Recent studies focuses on the development of beta type titanium alloys, composed of toxic elements (Nb, Mo, Ta ,...), because they have more advantages than alpha and alpha + beta (Ti- 6Al-4V) alloys such as lower modulus of elasticity, better plasticity and, moreover, the process variables can be controlled to produce selected results. This project focused on the development and characterization of Ti-12Mo-3Nb alloy in the condition 'as cast' and after thermomechanical treatment. The material was characterized in different conditions by X-ray diffraction, optical microscopy, microhardness measurements and elasticity modulus. The results showed that the forged Ti-12Mo-3Nb alloy showed the best combination of properties, being a promising candidate for use as implant. (author)

Gold nanoparticles applications in natural polymer modified for UV protection; Aplicacao de nanoparticulas de ouro em polimero natural modificado para protecao ultravioleta

Energy Technology Data Exchange (ETDEWEB)

Silva, Iris O. da; Ladchumananandasivam, Rasiah; Nascimento, Jose H. O. do; Silva, Francisco C. da; Sa, Christiane S. de A., E-mail: iris.oliveira@gmail.com.br [Universidade Federal do Rio Grande do Norte (PPGEM/UFRN), Natal, RN (Brazil)

2015-07-01

The protein-based polymers such as milk, such as polylactic acid (PLA) and soya can be cited as examples of substrates used in various fields of engineering, mainly due to its character of biodegradability, generating low environmental impact when compared to chemical polymers to petroleum-based, which take years to decompose in nature. Among these, soy fiber has great application potential because it is a manufactured material base of a residue obtained from the existing folder in the soybean seeds after oil extraction, using resins and chemicals for structural modification. In this work, soy mesh was used to develop a material with ultraviolet protection properties, through the use of nanotechnology. Thus, to connect the gold nanoparticles (NPAu), the fabric had a surface charge modified with the use of chitosan, using 20% of the weight of the material, followed by nanomaterials exhaust process. The NPAu were synthesized via chemical synthesis with sodium nitrate as reducing and stabilizing agent. The analysis of the solution samples were evaluated by absorbance spectroscopy and solid materials through diffuse reflectance spectroscopy and XRD X-ray diffraction. The size of NPAu was evaluated in equipment Zetasizer nanoseries / nanoZ, finding nanoparticles with an average size of 34.59 nm, and also underlined plasmon resonance phenomenon, with peaks between 530 nm and red coloration, and good results from the soundness washes, compared to conventional dyeing. It was found that soy polymer treated with NPAu presented an excellent property with ultraviolet protection factor (UPF) of +50, considered excellent, proving its potential application in the biomedical field. (author)

Criteria for design and application of city-gates heaters; Criterio para aplicacao e dimensionamento de aquecedores para pontos de entrega de gas

Energy Technology Data Exchange (ETDEWEB)

Henrique, Reis dos Reis Rodrigues; Machado, Leandro Bastos; Passos, Ney Goncalves; Correia, Luiz de Carvalho Dias [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2005-07-01

Gas delivery pressures foreseen in supplying contracts with LDS's (local distribution companies) require the adoption of pressure regulating systems in city-gates, which are installations where gas custody is transferred from the shipper to the LDC's. Generally, pressure drop is such that causes a large decrease in temperature gas. This temperature drop, depending on how large it is, may be not allowable, for it would imply in materials weakening and also in hydrocarbons hydrates formation. For this reason, many city-gates design contemplate a heating system, upstream the pressure regulation system, in order to warrant an acceptable temperature range of the delivering gas. The fact that heating systems represent roughly 30% of material costs of city-gates has motivated an accurate study of current practices of design and application of those systems. This paper presents these study results, as a criteria proposal that will allow city-gates reduction costs, both CAPEX and OPEX, at a very propitious time, considering that Brazilian gas industry is going to have a great expansion in the next years. (author)

Calibration of radionuclides with decay trough beta emission or electron capture by liquid scintillation technique; Calibracao de radionuclideos que decaem por emissao beta ou por captura eletronica pela tecnica de cintilacao liquida

Energy Technology Data Exchange (ETDEWEB)

Loureiro, Jamir dos Santos

2000-02-01

In this work is reported a methodology a methodology for pure beta and electron capture radionuclides standardization, suing liquid scintillation technique. In this sense the CIEMAT/NIST method, recently utilized by international laboratories, was implemented and the lack in the Laboratorio Nacional das Radiacoes Ionizantes - LNMRI, of the Comissao Nacional de Energia Nuclear - CNEN, for adequate methodology to standardize this kind if radionuclides was filled, fact that was not present with alpha and gamma radionuclides. The implementation procedure evaluation was provided by concentration activity determination of the following radionuclides: {sup 14} C and {sup 90} Sr, pure beta emitters; {sup 55} Fe, electron capture decay; {sup 204} Tl, electron capture and beta decay and {sup 60} Co, beta-gamma emitter. In this way, a careful analysis of the implementation procedure with these radionuclides types, ranging on a broad energy spectral, was possible. To check the calibration results, intercomparisons among our measurements of these radionuclides and the reference values of the CIEMAT/Spain laboratory were provided. To check the calibration results, intercomparisons among our measurements of these radionuclides and the reference values of the CIEMAT/Spain laboratory were provided. Besides this intercomparisons, one was provided with a {sup 204} Tl solution, utilized in the international comparison recently promoted by BIPM, and another one with a {sup 60} C solution calibrated in LNMRI/CNEN previously by a relative calibration system, with a well type pressurized ionization chamber, and an absolute beta-gamma coincidence system, with a pill-box type proportional counter 4 {pi} geometry, coupled with a scintillator system with a sodium iodide cristal of 4x4 inches. The comparisons among LNMRI/CNEN results and the reference values, showed a small deviation of 1,32% for {sup 14} C, 0,40% for {sup 60} Co, 1,12% for {sup 55} Fe, 0,10% for {sup 90} Sr and 0,73% for {sup 204} Tl. For the BIPM solution the deviation was 0,46% and for {sup 60} Co comparison with ionization chamber and coincidence methods the deviation was 0,18%. The results with CIEMAT/NIST method implementation in LNMRI/CNEN showed good agreement with others laboratories, making the implementation procedure a success. (author)

Hydrocarbons thermal maturation: Leopatin method applied to the Parana basin; Maturacao termica de hidrocarbonetos: aplicacao do metodo de Lopatin a Bacia do Parana

Energy Technology Data Exchange (ETDEWEB)

Eston, Sergio Medici de; Jardim, Niza S

1987-12-31

One of the requirements for the existent of economic deposits of hydrocarbons is that the organic matter has undergone adequate thermal maturation. Several techniques have been proposed in order to quantity the catagenetic state of kerogen, and the Lopatin-Waples methodology permits quantification at any past time and does not require laboratory tests on samples of the material. For this reason it is an useful techniques for predicting mature zones using as basic information the thermal and subsidence histories of each stratum. Lopatin`s technique was applied to the Parana basin, with McKenzie`s crustal stretching model fitted to the data of 18 wells, and the areas predicted as mature for oil and/or gas were in good agreement with the field results. The technique predicted oil phone areas at the east border of the basin for the Ponta Grossa and Irati formation, and also that most of the thermal maturation occurred after the basalt flows of the Cretaceous period. (author) 41 refs., 6 figs., 6 tabs.

Application of finance project for leverage of small size hydroelectric enterprising; Aplicacao do project finance para alavancagem de empreendimentos hidreletricos de pequeno porte

Energy Technology Data Exchange (ETDEWEB)

Santos, Silvana dos

2003-07-01

In the same way that the majority of the countries, project financing of substructure in Brazil, in project finance modality, depend on a skillful structure of guaranties and contracts to become possible. In the case of projects of centrals of generation of electrical energy, that financial engineering becomes still more complicated. In Brazil, due to particularities of the sectors of electricity, the arrangements of guaranties requested but creditors pass to present levels of complexity and exigency well elevated. The contractual appliances that give support to the project finance, originally projected to developed countries, request an extreme adaptation to these particularities. The development of Brazil is directly related to its capacity in expanding the offer of electric energy in the just measure of the national necessity. In this context, the small central hydroelectric (PCH's) represent, actually, an efficient and fast form to complete the offer of energy in such a way to supply the crescent demand the national market. For its characteristics, that type of undertaking can be developed by small manager, from among which are the owners of the areas in which on can find these hydraulic potentials which, however they do not dispose of capital to integral raising. These undertakings are tasks, normally, of low global cost, at the rate of US$ 1.000,00/k W, and of a smaller ambient impact, compared to the return that they give to the enterprise and to the Brazilian electric system as a whole, by having to receive special attention in the planned politics to the sector and to merit a series of incentives to become business still more attractive. By thinking in the found difficulty by small enterprises in rising undertakings of generation of electric energy of small port through the convectional mechanisms of financing is being proposed in that work a well-founded methodology in the concepts of the modality of financing project finance. (author)

Study for application of multi fuel technology in the Brazilian automobilistic market; Estudo para aplicacao da tecnologia multi combustivel no mercado automobilistico brasileiro

Energy Technology Data Exchange (ETDEWEB)

Gasparotto, Alexsander David [FIAT/GM Powertrain (Brazil); Massarani, Marcelo [Universidade de Sao Paulo (USP), SP (Brazil)

2006-07-01

The objective of this work is a study for the application of a new technology that will be used in the engine management system in the vehicle; where the final consumer can opt for the inquiry performance or seeking an economy for the fuel consumption depending on its daily use and of the prices offered in the gas stations. Flexible Fuel is a technology in development for the automobile market that mixes the use of two fuels (gasoline and ethanol) and their mixtures in the internal combustion engine. (author)

Application of finance project for leverage of small size hydroelectric enterprising; Aplicacao do project finance para alavancagem de empreendimentos hidreletricos de pequeno porte

Energy Technology Data Exchange (ETDEWEB)

Santos, Silvana dos

2003-07-01

In the same way that the majority of the countries, project financing of substructure in Brazil, in project finance modality, depend on a skillful structure of guaranties and contracts to become possible. In the case of projects of centrals of generation of electrical energy, that financial engineering becomes still more complicated. In Brazil, due to particularities of the sectors of electricity, the arrangements of guaranties requested but creditors pass to present levels of complexity and exigency well elevated. The contractual appliances that give support to the project finance, originally projected to developed countries, request an extreme adaptation to these particularities. The development of Brazil is directly related to its capacity in expanding the offer of electric energy in the just measure of the national necessity. In this context, the small central hydroelectric (PCH's) represent, actually, an efficient and fast form to complete the offer of energy in such a way to supply the crescent demand the national market. For its characteristics, that type of undertaking can be developed by small manager, from among which are the owners of the areas in which on can find these hydraulic potentials which, however they do not dispose of capital to integral raising. These undertakings are tasks, normally, of low global cost, at the rate of US$ 1.000,00/k W, and of a smaller ambient impact, compared to the return that they give to the enterprise and to the Brazilian electric system as a whole, by having to receive special attention in the planned politics to the sector and to merit a series of incentives to become business still more attractive. By thinking in the found difficulty by small enterprises in rising undertakings of generation of electric energy of small port through the convectional mechanisms of financing is being proposed in that work a well-founded methodology in the concepts of the modality of financing project finance. (author)

Application of diagnosis and monitoring area contaminated by petroleum derivatives; Aplicacao da tecnica de caminhamento eletrico em area contaminada por derivados de petroleo

Energy Technology Data Exchange (ETDEWEB)

Moreira, Cesar Augusto [Pos-graduacao em Geociencias em Meio Ambiente, IGCE - UNESP, Rio Claro, SP (Brazil)], E-mail: cesargeologia@yahoo.com.br; Dourado, Joao Carlos; Braga, Antonio Celso de Oliveira [Dept. de Geologia Aplicada, IGCE - UNESP, Rio Claro, SP (Brazil)], E-mails: jdourado@rc.unesp.br, acobraga@rc.unesp.br

2006-07-15

Geophysical methods are useful technic of geological investigation, thoroughly employed to diagnosis and monitoring contaminated areas, in conjunction with direct techniques of investigation such as chemical analyses. Among these, electric resistivity is more usually used in studies of contaminants in soil and groundwater, due to the high contrast of electric properties between the soil and the pollutant types frequently found, essentially constituted of composed organic and inorganic. Geophysical studies in impacted areas by petroleum products may be describe by anomalies of both low resistivity and high resistivities, confirmed as contaminant by chemical analyses. This apparent contradiction can reflect processes of degradation of the contaminants, directly associated with its residence time in the soil, through the generation of by-products that change the physical properties of the soil and groundwater, principally for the mineral dissolution by action of organic acids and by formation of minerals of oxides and hydroxides minerals. Natural attenuation defines a series of physical, chemical and biological processes that allow the degradation, dispersion and dilution of contaminants in a natural form, in other words, free from human intervention. This paper presents the application of electrical profiling technique in a contaminated industrial area for benzene, toluene, xylene, 1,2 dichloroethene and inorganic salts and it discusses the physical alterations of the contaminated soil through the obtained results, under the optics of the Natural Attenuation in course in the area of study. (author)

Hydrocarbons thermal maturation: Leopatin method applied to the Parana basin; Maturacao termica de hidrocarbonetos: aplicacao do metodo de Lopatin a Bacia do Parana

Energy Technology Data Exchange (ETDEWEB)

Eston, Sergio Medici de; Jardim, Niza S.

1986-12-31

One of the requirements for the existent of economic deposits of hydrocarbons is that the organic matter has undergone adequate thermal maturation. Several techniques have been proposed in order to quantity the catagenetic state of kerogen, and the Lopatin-Waples methodology permits quantification at any past time and does not require laboratory tests on samples of the material. For this reason it is an useful techniques for predicting mature zones using as basic information the thermal and subsidence histories of each stratum. Lopatin`s technique was applied to the Parana basin, with McKenzie`s crustal stretching model fitted to the data of 18 wells, and the areas predicted as mature for oil and/or gas were in good agreement with the field results. The technique predicted oil phone areas at the east border of the basin for the Ponta Grossa and Irati formation, and also that most of the thermal maturation occurred after the basalt flows of the Cretaceous period. (author) 41 refs., 6 figs., 6 tabs.

Analysis of ferritic stainless steel tube applied in radiation furnaces; Analise de tubos de aco inoxidavel ferritico para aplicacao em fornos de radiacao

Energy Technology Data Exchange (ETDEWEB)

Porto, P.C.R.; Spim, J.A. [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Centro de Tecnologia. Lab. de Fundicao], e-mail: spim@ufrgs.br; Santos, C.A. [Pontificia Universidade Catolica do Rio Grande do Sul (PUC-RS), Porto Alegre, RS (Brazil). Fac. de Engenharia. Programa de Pos-Graduacao em Engenharia e Tecnologia de Materiais (PGETEMA)

2006-07-01

The objective of this work was to evaluate the change in mechanic properties and phase transformations of ferritic stainless steel tube, ASTM 268 Gr 446, applied in high temperature conditions. The work has used tubes from radiation furnaces of the PETROBRAS Xisto Industrialization Unit. The samples used for comparison were obtained from new tubes and tubes already used in furnaces. The test analyses were optical metallography, scanning electron microscopy, energy dispersive spectrometer, hardness and microhardness test and tension test. Results have shown that the new tubes presented a ferritic matrix and in old tubes were observed a great quantity of sigma phase and carbides. Along with the thickness of the tubes it was verified that the inside region presented an increase of sulfate and the outside region an increase of carbides. (author)

Study for application of flexible fuel technology in the Brazilian automobile market; Estudo para aplicacao da tecnologia multi combustivel no mercado automobilistico brasileiro

Energy Technology Data Exchange (ETDEWEB)

Gasparotto, Alexsander David [FIAT/GM Powertrain (Brazil); Massarani, Marcelo [Sao Paulo Univ., SP (Brazil). Escola Politecnica

2006-07-01

The objective of this work is a study for the application of a new technology that will be used in the engine management system in the vehicle; where the final consumer can opt for the inquiry performance or seeking an economy for the fuel consumption depending on its daily use and of the prices offered in the gas stations. Flexible Fuel is a technology in development for the auto mobile market that mixes the use of two fuels (gasoline and ethanol) and their mixtures in the internal combustion engine. (author)

Modification of a cellulose derived for your application on enzyme immobilization;Modificacao de um derivado celulosico para sua aplicacao na imobilizacao de enzimas

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Elaine S.; Rodriguez, Ruben J.S.; Lamonica, Alano C., E-mail: ecarvalho@uenf.b [Universidade Estadual do Norte Fluminense Darcy Ribeiro (LAMAV/UENF), Campos dos Goytacazes, RJ (Brazil). Lab. de Materiais Avancados; Tavares, Maria Ines B. [Universidade Federal do Rio de Janeiro (IMA/UFRJ), RJ (Brazil). Inst. de Macromoleculas Profa. Eloisa Mano

2009-07-01

The chemical modification of (acrylamidomethyl) cellulose acetate propionate (AMCAP) was done through the technique of grafting via radical using acrylic acid as modifier, with the objective to make the polymer more hydrophilic. The structural characterization of AMCAP and modified AMCAP-H{sub 2}O{sub 2} was analysed by using the technique of {sup 13}C-nuclear magnetic resonance (NMR-{sup 13}C). By the techniques differential scanning calorimetry analysis (DSC) and thermogravimetric analysis (TGA), the thermal properties was characterized and the hydrophobic / hydrophilic character was determined by measurements of the contact angle. The results show that occurred the change intended with the introduction of acrylic acid in the side chain of the polymer, increasing the hydrophilic character on the AMCAP. (author)

The Application of PLC (Powerline Communications) in Brazil in the regulatory viewpoint; A aplicacao do PLC no Brasil do ponto de vista regulatorio

Energy Technology Data Exchange (ETDEWEB)

Vieira, Daniel; Silva Filho, Armando [Agencia Nacional de Energia Eletrica (ANEEL), Brasilia, DF (Brazil). Superintendencia de Regulacao dos Servicos de Distribuicao

2010-07-01

The Powerline Communications technology - PLC allows transmission of data, voice, image and access to high speed internet by the grid, so that a power plug can also be an access point to the network communication. Considering that the electric grid reaches the vast majority of households, there is great potential in using this technology as a tool to achieve the reality of digital inclusion in the country. However, its implementation must be accompanied by effective regulation, both through policies with respect to the conditions of use of radio frequencies, as in regulating the use of distribution networks of electricity as a means of transport for communication signal. In this context, the present article deals with the fundamental rules governing the application of PLC technology from the standpoint of the distributors and consumers of electricity, with attention to quality assurance of electrical energy and facility security.

Comparison between 3D dynamics filter technique, field-in-field, electronic compensator in breast cancer; Comparacao entre tecnica 3D com filtro dinamico, field-in-field e compensacao eletronica para cancer de mama

Energy Technology Data Exchange (ETDEWEB)

Trindade, Cassia; Silva, Leonardo P.; Martins, Lais P.; Garcia, Paulo L.; Santos, Maira R.; Bastista, Delano V.S.; Vieira, Anna Myrian M.T.L.; Rocha, Igor M., E-mail: cassiatr@gmail.com [Instituto Nacional de Cancer (INCA), Rio de Janeiro, RJ (Brazil)

2012-12-15

The radiotherapy has been used in a wild scale in breast cancer treatment. With this high demand, new technologies have been developed to improve the dose distribution in the target while reducing the dose delivered in critical organs. In this study, performed with one clinical case, three planning were done for comparison: 3D technique with dynamic filter, 3D with field-in-field technique (forward-planned IMRT) and 3D technique using electronic compensator (ECOMP). The planning were done with a 6MV photon beam using the Eclipse software, version 8.6 (Varian Medical Systems). The PTV was drawn covering the whole breast and the critical organs were: the lung on the irradiated side, the heart, the contralateral breast and the anterior descending coronary artery (LAD). The planning using the compensator technique permitted more homogeneous dose distribution in the target volume. The V20 value of the lung on the irradiated side was 8,3% for the electronic compensator technique, 8,9% for the field-in-field technique and 8,2% for the dynamic filter technique. For the heart the dose range was 15.7 - 139.9 cGy, 16.3 - 148.4 cGy for the dynamic filter technique and 19.6 - 157.0 cGy for the field-in-field technique. The dose gradient was 11% with compensator electronic, 15% dynamic filter technique and 13% with field-in-field. The application of electronic technique in breast cancer treatment allows better dose distribution while reduces dose in critical organs, but in the same time requires a quality assurance. (author)

Microstructural characteristics of steel rebar submitted to the process of self - tempering; Caracterizacao microestrutural de superficies e interfaces de vergalhoes de aco auto-revenidos utilizando Microscopia Eletronica de Varredura (MEV) e analise quimica

Energy Technology Data Exchange (ETDEWEB)

Barreto, M.F.O., E-mail: matheusfob@yahoo.com.br [Universidade Federal de Minas Gerais (UFMG), MG (Brazil)

2014-07-01

Every day the construction industry seeks new alternatives to maximize use of the materials provided new tools for structural design of the new techniques in welding rods. In this sense, this work proposes to study the mechanical properties of steel rebar self-tempering for civil construction, choosing the bars from 6.3 to 25.4 mm in diameter for the study. The cooling process of rebar, after rolling, known as self-tempering produces a rebar with excellent mechanical properties and low cost to the plant, they put the rebar shall be composed of concentric layers with different mechanical properties among themselves. To study the influence of these layers on the mechanical behavior of rebar microstructural characterization was made by means of electron microscopy analysis of transmitted light and scanning of all samples. From the results it was found that only the bars 20 and 25mm diameter had a heat treatment for self-tempering relevant. (author)

Comparison between 3D conventional techniques, field-in-field and electronic tissue compensation for mantle fields planning; Comparacao entre tecnica 3D convencional, field-in-field e compensacao eletronica para planejamento de manto

Energy Technology Data Exchange (ETDEWEB)

Martins, Lais P.; Silva, Leonardo P.; Trindade, Cassia; Garcia, Paulo L.; Santos, Maira R.; Batista, Delano V.S., E-mail: pm.lais@gmail.com [Instituto Nacional de Cancer (INCA), Rio de Janeiro, RJ (Brazil)

2012-12-15

External radiotherapy treatment for Hodgkin's lymphoma over diaphragm region requires large radiation fields with protections applied to larynx, humerus head and lungs. The size and shape of the field, which covers different depths, make it difficult to distribute a homogeneous dose. Techniques such as field-in-field and electronic tissue compensation may be used to make dose homogeneous and compensate the obliquity from the tissue. Three types of planning were performed for diagnose of nodular sclerosis Hodgkin's lymphoma: one plan with two fields, AP-PA (AP plan), another with four fields field-in- field (FF plan), and a third one with two fields and electronic tissue compensation (ETC plan). Results showed better gradient, cover of PTV and dose distribution for the ETC plan, besides the advantage from this technique of does not require protection blocks. In the meanwhile, AP and FF plans require simpler dosimetry and fewer MU. Related to the uniformity of dose distribution, AP plan showed hot areas in the neck region, FF plan showed hot areas in the shoulder region and ETC plan showed most uniform distribution without hot areas. The electronic tissue compensation is a useful tool for large and shaped fields as the mantle field, however higher MU and complex dosimetry should be taken in account. (author)

Study of virtual reality application in training programs on nuclear technology; Estudo da aplicacao de realidade virtual em programas de treinamento sobre tecnologia nuclear

Energy Technology Data Exchange (ETDEWEB)

Pastura, Valeria da Fonseca e Silva

2016-07-01

The activities developed in the units which organize the National Nuclear Energy Commission (CNEN) are present in various sectors of the Brazilian society, being them in medicine, industry, electricity generation, mining, and among the others. Based on the assumption that the employees are CNEN's mayor differential and the training programs play an important role in the process of organizational development, because they align the professionals with the strategies of the institution properly. Focusing on these matters, this master's thesis aimed to evaluate the training programs which are applied by CNEN, in order to propose and evaluate the use of the Virtual Reality (VR) expertise as a new method to be applied in the training programs. To accomplish this purpose, we performed two methodological approaches through questionnaires. And from the analysis of the results obtained, we could realize that there was no efficient training program which is systematically applied by CNEN, and the use of the RV technique improves the training programs in the understanding of themes whose assimilation is challengeable, such as those related to nuclear power. In this sense, for a better functional performance, the training programs adopted by CNEN must be structured so as to enable the development of each server's skills as well as abilities and, it is actually hoped that the virtual reality tools could be inserted in these programs to pursue only this purpose. (author)

Human error probability quantification using fuzzy methodology in nuclear plants; Aplicacao da metodologia fuzzy na quantificacao da probabilidade de erro humano em instalacoes nucleares

Energy Technology Data Exchange (ETDEWEB)

Nascimento, Claudio Souza do

2010-07-01

This work obtains Human Error Probability (HEP) estimates from operator's actions in response to emergency situations a hypothesis on Research Reactor IEA-R1 from IPEN. It was also obtained a Performance Shaping Factors (PSF) evaluation in order to classify them according to their influence level onto the operator's actions and to determine these PSF actual states over the plant. Both HEP estimation and PSF evaluation were done based on Specialists Evaluation using interviews and questionnaires. Specialists group was composed from selected IEA-R1 operators. Specialist's knowledge representation into linguistic variables and group evaluation values were obtained through Fuzzy Logic and Fuzzy Set Theory. HEP obtained values show good agreement with literature published data corroborating the proposed methodology as a good alternative to be used on Human Reliability Analysis (HRA). (author)

State-of-the-art of the development and appliance of anaerobic digestion in Brazil; Estagio de desenvolvimento e aplicacao da digestao anaerobica no Brasil

Energy Technology Data Exchange (ETDEWEB)

Hirata, Yukie Saito; Craveiro, Americo Martins [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil)

1988-12-31

This paper presents the up-to-date situation of both research and application of anaerobic digestion in Brazil. Concerning application, rural digesters have accounted around 7520 units and this number is expected to increase very slowly. For anaerobic treatment of industrial and domestic effluents, inversely, a rapid growth is expected for the near future. (author) 9 refs., 3 tabs.

Monotron and azimuthally corrugated: application to the high power microwaves generation; Monotron e cavidades azimutalmente corrugadas: aplicacao a geracao de microondas de alta potencia

Energy Technology Data Exchange (ETDEWEB)

Castro, Pedro Jose de

2003-07-01

The present document reports the activity of construction and initial operation of 6.7 GHz operation for high power microwave generation, the study on cylindrical resonators with azimuthally corrugated cross section, the determination of electrical conductivity of metallic materials and development of dielectric resonators for telecommunication applications.

Application of artificial neural networks on the characterization of radioactive waste drums; Aplicacao de redes neurais artificiais na caracterizacao de tambores de rejeito radioativo

Energy Technology Data Exchange (ETDEWEB)

Potiens Junior, Ademar Jose; Hiromoto, Goro, E-mail: apotiens@ipen.b, E-mail: hiromoto@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-10-26

The methodology consist of system simulation of drum-detector by Monte Carlo for obtention of counting efficiency. The obtained data were treated and a neural artificial network (RNA) were constructed for evaluation of total activity of drum. For method evaluation measurements were performed in ten position parallel to the drum axis and the results submitted to the RNA. The developed methodology showed to be effective for isotopic characterization of gamma emitter radioactive wastes distributed in a heterogeneous way in a 200 litters drum. The objective of this work as to develop a methodology of analyse for quantification and localization of radionuclides not homogeneous distributed in a 200 liters drum based on the mathematical techniques

Synthesis of calcium aluminate with silicon addition for application in biomaterials; Sintese de aluminato de calcio com adicao de prata para aplicacao em biomateriais

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, P.J.; Almeida, L.H.S.; Pappen, F.G.; Ribeiro, A.S.; Cava, S.S. [Universidade Federal de Pelotas (UFPel), RS (Brazil); Veiga, F.C.T.; Jurado, J., E-mail: ati_jg@hotmail.com [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil)

2016-07-01

Ceramic materials have biocompatibility have been studied, researched and applied in various treatments such as endodontics and orthopedics. This study aims to carry out the synthesis by the polymeric precursor method for post calcium trialuminato (C3A) and with addition of 1% and 5% silver, them the powders were calcined in de temperature 1000°C, carried out a comparative study between them. The ceramic powders were characterized by X-ray diffraction, having a phase composition, scanning electron microscopy (SEM) associated with EDS observed grain morphology and quantity of the chemical elements. The analysis flow, pH, release of calcium ions (Ca{sup 2+}) and silver ions (Ag{sup +}) were evaluated with the sealer MTA Fillapex result that calcium aluminate addition of silver improved the MTA Fillapex stream with the release of ions Ca{sup +2}, being a material that allows applications in the field of endodontics. (author)

Electron spin resonance and its application to heat treated carbonaceous materials; A ressonancia de spin eletronico e sua aplicacao aos materiais carbonosos tratados termicamente

Energy Technology Data Exchange (ETDEWEB)

Emmerich, Francisco Guilherme [Espirito Santo Univ., Vitoria, ES (Brazil). Laboratorio de Materiais Carbonosos e Plasma Termico

1994-12-31

This work presents the basic characteristics of the electron spin resonance technique, also called paramagnetic resonance, being discussed its application to heat treated carbonaceous materials. In the low heat treatment temperature (HTT) range (below 700 deg C) the organic free radical are the predominant unpaired spin center, which play a key role in the process of carbonization and meso phase formation. At higher temperatures, it is possible to make correlations between the low H T T range and the high HTT range (above 130 deg C), where the predominant unpaired spin center are the free charge carriers (free electrons) of the graphite like crystallites of the material, which are formed by the carbonization process. (author) 10 refs., 3 figs.

Characterization of isolated communities: application in the city of Ubatuba, Sao Paulo state, Brazil; Caracterizacao de comunidades isoladas: aplicacao em comunicade de Ubatura/SP

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Maria Julita Guerra [Secretaria de Estado de Energia, Recursos Hidricos e Saneamento (SERHS), Sao Paulo, SP (Brazil)], e-mail: mjulita@sp.gov.br; Pilla, Adelina Teixeira Fonseca de [Equilibrio, Desenvolvimento Ambiental Ltda., Sao Paulo, SP (Brazil)], e-mail: adelina.fonseca@uol.com.br

2004-07-01

This paper presents a methodology for characterization of isolated communities, developed on a consultant work for the Ministry of Mines and Energy - MME. It still presents the application of this methodology of analysis on a isolated community in the city of Ubatuba, Sao Paulo state. (author)

Development of aptamers for use as radiopharmaceuticals in the bacterial infection identification; Desenvolvimento de aptameros especificos para aplicacao como radiofarmacos na identificacao de bacterias

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Ieda Mendes

2013-08-01

The difficulty in early detection of specific foci caused by bacteria in the bacterial infection has raised the need to search for new techniques for this purpose, since these foci require prolonged treatment with antibiotics and in some cases even drainage or, if applicable, removal of prostheses or grafts. Detection of bacterial infections by scintigraphy had the advantage that a whole body image could be obtained, since specific tracers were available. This study aims to obtain aptamers specific for bacteria identification for future use as radiopharmaceutical. The SELEX (Systematic Evolution of Ligands by Exponential Enrichment) methodology can generate oligonucleotides (aptamers) that are able to bind with high affinity and specificity to a specific target, from small molecules to complex proteins, by using rounds of enrichment and amplification. Aptamers can be labeled with different radionucleotides such as {sup 99}mTc, {sup 18}F and {sup 32}P. In this study, aptamers anti-peptidoglycan, the main component of the bacterial outer cell wall, were obtained through SELEX. Whole cells of Staphylococcus aureus were also used to perform the SELEX to cells (cell-SELEX). The selection of aptamers was performed by two different procedures (A and B). The A process has been accomplished by 15 SELEX rounds in which the separation of the oligonucleotides bound to the peptidoglycan of unbound ones was performed by filtration. In the B process 15 SELEX rounds were performed using the centrifugation for this separation, followed by 5 rounds cell-SELEX. The SELEX started with a pool of ssDNA (single stranded DNA). For A process, initially a library of ssDNA was incubated with peptidoglycan and the amplification of oligonucleotides that were able to bind to peptidoglycan was performed by PCR (Polymerase Chain Reation). The amplified oligonucleotides were again incubated with peptidoglycan, amplified and purified. At the end of 15 selection rounds the selected oligonucleotides were cloned. The product of recombination was used to transform Escherichia coli ToplOF'. The plasmid DNA from 40 selected colonies were extracted and quantified. The plasmids were sequenced, two different sequences (Antibac1 and Antibac2) were obtained and their secondary structures determined. The aptamers obtained were synthesized and labeled with {sup 32}p. The labeled aptamers were incubated with S. aureus cells and the amount of radiolabeled ssDNA was determined by liquid scintillation spectrometry. The oligonucleotides library labeled with {sup 32}p was used as control. For the aptamer Antibac1 the radiation linked to the pellet was 28 times higher than obtained with the control and for the Antibac2 was 22 higher. A specific assay was conducted with labeled aptamers using S. aureus, E. co ti, Candida albicans and human fibroblasts. For both aptamers (Antibac1 and Antibac2) binding to bacterial cells was significantly higher than for C. albicans and fibroblasts, demonstrating their specificity for bacteria. For B process, after 15 SELEX rounds was performed the cell-SELEX starting with the products 15th round being incubated with S. aureus cells. The amplified oligonucleotides were incubated again with the bacteria in the next round and so on. At the end of the 5 rounds of selection, the selected oligonucleotides were cloned and sequenced as in A process. Eleven different sequences from 21 clones were obtained and their secondary structures were determined. The aptamers obtained by process A showed high affinity and specificity for bacteria. The aptamers obtained by process B will be evaluated for these parameters in a future work. (author)

Method for evaluating the applicability and application rate wastes in soil; Metodo para avaliacao da aplicabilidade e taxa de aplicacao de residuos em solo

Energy Technology Data Exchange (ETDEWEB)

Linhares, Monica Moreira [Partime (Brazil); Seabra, Paulo Negrais [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

1991-01-01

Land treatment of refinery solid wastes has been practiced in the last few years by some PETROBRAS refineries. The biodegradation process is dynamic and complex, and incorrect monitoring may destroy the potential of the soil. Due to great differences both in terms of soils and of residues, each case must be monitored individually. We therefore developed a monitoring method for land farming systems based on the impact of the waste on indigenous soil microbial populations. The method is extremely simple, requiring only a gas chromatograph to evaluate the CO{sub 2} evolution, and can detect possible causes for low efficiency biodegradation processes. Conditions should then be altered, to ensure adequate functioning of the system.The method also allows for determination of the applicability of candidate wastes and of acceptable waste application rates in soil. (author) 2 refs., 7 figs.

Characterization and potential application of pataua vegetable oil in apatite flotation; Caracterizacao e potencial aplicacao do oleo vegetal de pataua na floracao de apatita

Energy Technology Data Exchange (ETDEWEB)

Oliveira, P.S. de; Mansur, H.S.; Peres, A.E.C., E-mail: eng.priscila.oliveira@gmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)

2016-07-01

The present research characterizes the Pataua palm (Oenocarpus bataua) oil regarding to its fatty acids profile and acidity index, and evaluates its use for apatite flotation. The Pataua oil evaluated is unsaturated e predominantly composed of cis-9-octadecenoic acid (oleic acid). The mineral sample characterization revealed a material composed by a fluoroapatite deficient in fluorine, a possibly result of isomorphic substitution, and with quartz and monazite inclusions. The analysis of the mineral after reagent conditioning, by Fourier Transform Infrared Spectroscopy (FTIR), pointed to the presence of characteristic bands of carbon chains and carboxylate group, suggesting the collector adsorption through the mechanisms of chemisorption and insoluble calcium salts precipitation. Thus, it is proposed the Pataua oil potential use in flotation systems aiming apatite recovery. (author)

Root planing with Er:YAG laser X Gracey curette, a study in vitro in scanning electron microscopic study; Avaliacao em microscopia eletronica de varredura da superficie radicular, raspada e alisada com Er: YAG laser

Energy Technology Data Exchange (ETDEWEB)

Mello, Fabiano Augusto Sfier de

2000-07-01

The Er:YAG laser has been studied as a periodontal therapies, used to remove subgingival calculus and its bactericidal effects. The proposal of this study is to evaluate the effectiveness of the Er:YAG laser in root planing in comparison to the traditional method, not surgical. Six recently extracted due to the disease periodontal, were cut longitudinally, tends like this two half of the root. These half were separate in four groups. The first group is the natural tooth (group controls negative), the second group (group controls) was accomplished to root planing with Gracey curette. And in the third to Er:YAG laser with a contact tip, using a 45 deg angle in relation to the root; in the fourth group was scraped and planned with Er:YAG laser and complemented root planing with Gracey curette. The used energy was of 100 mJ (out put) and the frequency of 10 Hz accomplished with irrigation. The obtained results were similar in the groups 2 and 3 in comparison to the amount of smear-layer. In group 4 however, better result was obtained, because the image (SEM) was much more regular and with less amount of smear-layer. The conclusion of the work is that with the association of the laser technique and Gracey curette the results are superior to the conventional treatment. (author)

Determination of the air attenuation and electronic loss for the free air concentric cylinders ionization chamber; Determinacao da atenuacao do ar e perda eletronica para a camara de ionizacao de ar livre de cilindros concentricos

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Hebert Pinto Silveira de

2010-07-01

Along the latest years, the LNMRI has been proceeding a continuous research work with a concentric cylinders type free air ionizing chamber (VICTOREEN, model 481), aiming to establish it as a new national standard, and, as a consequence, replace the worldwide accepted secondary standard, calibrated by PTB. Taking into account that the absolute determination of kerma in air with a free air ionizing chamber implies the acquirement of a number of correction factors. The main objective of the present work comprises the determination of the two factors, specifically, electronic loss (k{sub e}) and air attenuation (k{sub a}). The correction factors were obtained through mammography qualities reference spectrum, using Monte Carlo simulation method. The Penelope code was used in the simulation procedures. Simulations took place in two stages, the acquirement of specters related to the qualities of interest (mammography) with the x ray tube (Pantak, model HF160 e Panalytical, model XRF window), and the free-air ionization chamber. The data were compared to those related to the BIPM chamber, to electronic loss were not detected. The comparison between air attenuation factors was obtained data bellow 0.13%. (author)

EPR response characterization of drugs excipients for applying in accident dosimetry; Caracterizacao da resposta RPE dos excipientes dos medicamentos para aplicacao em dosimetria de acidente

Energy Technology Data Exchange (ETDEWEB)

Marczewski, Barbara S.; Rodrigues Junior, Orlando; Galante, Ocimar L.; Costa, Zelia M. da; Campos, Leticia L. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

2002-07-01

Some drugs are widely used by the population and can be employed to dose retrospective. The carbohydrates (saccharides), commonly used as excipients in the pharmaceutical industry, produce a quantity of free radicals after gamma irradiation, making them useful for dosimetry in emergency or accident situations that imply in dose evaluation from the materials found nearly or in contact with victims. In general, EPR signal from pulverized pills of some drugs are very complex due to the variety of components in the formulation. Because of this fact, some pharmaceutical excipients identified in the pill composition were also analysed by EPR spectrometry. On the counter drugs were studied: Cebion glucose, AAS, Aspirina, Conmel, Lacto-Purga and sugar substitutive ZeroCal. The excipients were: lactose, amide, anhydrous glucose and magnesium stearate. In some samples the number of radicals produced increased with the dose, showing a linear response for a dose range of interest and an adequate sensibility for dosimetry in accident cases.

Application of artificial intelligence to electrofacies identification: neural networks versus discriminant analysis; Aplicacao de inteligencia artificial na identificacao de eletrofacies redes neuroniais versus analise discriminante

Energy Technology Data Exchange (ETDEWEB)

Silva Rodrigues, F da [PETROBRAS, Rio de Janeiro, RJ (Brazil); Queiroz Neto, I.A. de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

1992-07-01

Electro-facies are identified by neural network trained with well log and core data. Differences between neural network and expert system are discussed. According the author, the combination of neural network computing and traditional computing methods, like discriminant analysis, can help in the solution of many problems in electro-facies identification. 5 figs., 1 tab., 11 refs.

Self-organizing maps applied to two-phase flow on natural circulation loop study; Aplicacao de mapas auto-organizaveis na classificacao de padroes de escoamento bifasico

Energy Technology Data Exchange (ETDEWEB)

Castro, Leonardo Ferreira

2016-11-01

Two-phase flow of liquid and gas is found in many closed circuits using natural circulation for cooling purposes. Natural circulation phenomenon is important on recent nuclear power plant projects for decay heat removal. The Natural Circulation Facility (Circuito de Circulacao Natural CCN) installed at Instituto de Pesquisas Energeticas e Nucleares, IPEN/CNEN, is an experimental circuit designed to provide thermal hydraulic data related to single and two-phase flow under natural circulation conditions. This periodic flow oscillation behavior can be observed thoroughly in this facility due its glass-made tubes transparency. The heat transfer estimation has been improved based on models that require precise prediction of pattern transitions of flow. This work presents experiments realized at CCN to visualize natural circulation cycles in order to classify two-phase flow patterns associated with phase transients and static instabilities of flow. Images are compared and clustered using Kohonen Self-organizing Maps (SOM's) applied on different digital image features. The Full Frame Discret Cosine Transform (FFDCT) coefficients were used as input for the classification task, enabling good results. FFDCT prototypes obtained can be associated to each flow pattern, enabling a better comprehension of each observed instability. A systematic test methodology was used to verify classifier robustness.

Application of compartmental metabolic models for determination of retention and excretion functions; Aplicacao de modelos metabolicos para a determinacao de funcoes de excrecao e retencao

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Junior, O

1994-07-01

After an intake of radioactive material, its behaviour in the human body can be described by mathematical models, where organs, tissues or regions of the body are treated as a chain of linked compartments. The mathematical approach for such metabolic models is usually done through a system of differential equations of first order with constant coefficients. The solutions of this system of equations associates the radionuclide intake, with the fraction excreted or retained in the organ of interest. A computer program - called INCORP and for running in PC compatible microcomputers - was developed in order to find the solutions of such system of equations, using an analytical method based on expansion of series of exponential matrices. The metabolic model presented in the ICRP-30 publication was simulated using the INCORP program, in order to find the respective retention and excretion curves for selected radionuclides. (author)

Evaluation of commercial and sulfated ZrO{sub 2} aiming application catalysis; Avaliacao de ZrO{sub 2} comercial e sulfatada visando aplicacao em catalise

Energy Technology Data Exchange (ETDEWEB)

Silva, F.N.; Dantas, J.; Costa, A.C.F.M., E-mail: nilson.s@hotmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Pos-Graduacao em Engenharia de Materiais; Pallone, E.M.J.A. [Universidade de Sao Paulo (USP), Pirassununga, SP (Brazil). Departamento de Ciencias Basicas; Dutra, R.C.L. [Instituto de Aeronautica e Espaco (AQI/IAE), Sao Jose dos Campos, SP (Brazil). Divisao de Quimica

2014-07-01

This study evaluates the performance of commercial and sulfated ZrO{sub 2} for future application in catalysis. Commercial ZrO{sub 2} was provided by the company Saint-Gobain Zirpro. The sulfation occurred with SO{sub 4}{sup -2} ion content of 30% compared to the mass of ZrO{sub 2}. The samples were characterized by XRD, FTIR, EDX and GD. The results revealed the formation of a monoclinic phase for the commercial sample, and a monoclinic major phase with tetragonal traces for the sulfated sample. The commercial ZrO{sub 2} showed a narrow, bimodal and asymmetric agglomerates distribution, while the sulfated sample showed a narrow, tetramodal and asymmetric agglomerates distribution. The presence of traces of the tetragonal phase in the SO{sub 4}{sup -2}/ZrO{sub 2} XRD, and the presence of SO{sub 3} in the EDX were good indicators for future use in catalysis to provide ester. (author)

New technologies application to increase the transmission capacity in power systems; Aplicacao de novas tecnologias para aumentar a capacidade de transmissao em sistemas de potencia

Energy Technology Data Exchange (ETDEWEB)

Figueiredo, Erli Ferreira [Universidade do Estado, Rio de Janeiro, RJ (Brazil)]. E-mail: erli@openlink.com.br

2001-07-01

The deregulation and the Brazilian electric sector new formulation associated to the growth of the electric energy market, has been contributing to increase the power flows through located transmission lines in one same region, as well as in different regions. This increase of flow will require the construction of new transmission lines, in general associated to eventual efforts in the system. However, due to environmental restrictions and to difficulties for acquisition of free soil bands for transmission lines, in this article new technologies of transmission in order to increase the capacity of the existing and future power systems are presented, with the purpose of preventing or postponing the construction of new transmission lines.

Application of electron ionization mass spectrometry for mulungu alkaloid analysis; Aplicacao de espectrometria de massas com ionizacao por eletron na analise de alcaloides do mulungu

Energy Technology Data Exchange (ETDEWEB)

Feitosa, Luis Guilherme Pereira; Guaratini, Thais; Lopes, Joao Luis Callegari; Lopes, Norberto Peporine [Universidade de Sao Paulo (FCFRP/USP), Ribeirao Preto, SP (Brazil). Fac. de Ciencias Farmaceuticas de Ribeirao Preto. Dept. de Quimica e Fisica; Bizaro, Aline Cavalli; Silva, Denise Brentan da, E-mail: npelopes@fcfrp.usp.br [Incubadora SUPERA, Ribeirao Preto, SP (Brazil). Lychnoflora Pesquisa e Desenvolvimento em Produtos Naturais

2012-07-01

Erythrina verna is a medicinal plant used to calm agitation popularly known as mulungu. We purchased the barks of E. verna from a commercial producer and analyzed the alkaloid fraction of the bark by CG-MS and HRESI-MS. Five erythrinian alkaloids were identified: erysotrine, erythratidine, erythratidinone, epimer, and 11-hydroxyeritratidinone. Here we report the compound 11-hydroxyeritratidinone for the first time as a natural product. (author)

Preparation of Pt/USY catalysers and application in the reformation of n-octane; Preparacao de catalisadores Pt/USY e aplicacao na reforma do n-octano

Energy Technology Data Exchange (ETDEWEB)

Araujo, Alfredina dos S.; Sousa, Bianca V.; Grau, Javier M.; Rodrigues, Meiry Glaucia F. [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

2008-07-01

During the catalytic reform, the hydrocarbons of long chain are reconstructed, through reactions of isomerization, hydrogenation, desidrocyclization and dehydrogenation, among others. These reactions occur in acid or metallic small farms, on a bifunctional catalyzer of type Pt/Al{sub 2}O{sub 3}-Cl. The metallic component is active in the hydrogenation and dehydrogenation, while the support (chlorinated alumine) possess acidity enough to promote isomerization reactions. The joint action of the two small farms promotes other reactions, as the desidrocyclization, through a bifunctional mechanism. Reactions also occur undesirable (hydrocracking and hydrogenation) that they diminish the selectivity and they deactivate the catalyzer for coke formation. The catalyzers most promising for this reaction are the acid zeolites of great pores, had to its textural characteristics that facilitate the access of the reagents to active small farms. In this work, the catalytic performance of the metallic function in the dehydrogenation reaction, the conversion and income in the reaction of reform of n-octane will be studied, of the catalyzers of the Pt/USY type. (author)

Application of Monte Carlo simulation to the standardization of positron emitting radionuclides; Aplicacao do metodo de Monte Carlo na padronizacao de radionuclideos emissores de positrons

Energy Technology Data Exchange (ETDEWEB)

Tongu, Margareth Lika Onishi

2009-07-01

Since 1967, the Nuclear Metrology Laboratory (LNM) at the Nuclear and Energy Research (IPEN) in Sao Paulo, Brazil, has developed radionuclide standardization methods and measurements of the Gamma-ray emission probabilities per decay by means of 4{pi}{beta}-{gamma} coincidence system, a high accuracy primary method for determining disintegration rate of radionuclides of interest. In 2001 the LNM started a research field on modeling, based on Monte Carlo method, of all the system components, including radiation detectors and radionuclide decay processes. This methodology allows the simulation of the detection process in a 4{pi}{beta}-{gamma} system, determining theoretically the observed activity as a function of the 4{pi}{beta} detector efficiency, enabling the prediction of the behavior of the extrapolation curve and optimizing a detailed planning of the experiment before starting the measurements. One of the objectives of the present work is the improvement of the 4{pi} proportional counter modeling, presenting a detailed description of the source holder and radioactive source material, as well as absorbers placed around the source. The simulation of radiation transport through the detectors has been carried out using code MCNPX. The main focus of the present work is on Monte Carlo modeling of the standardization of positron emitting radionuclides associated (or not) with electron capture and accompanied (or not) by the emission of Gamma radiation. One difficulty in this modeling is to simulate the detection of the annihilation Gamma ray, which arise in the process of positron absorption within the 4{pi} detector. The methodology was applied to radionuclides {sup 18}F and {sup 22}Na. (author)

Analysis of implementation of energy efficiency labeling of buildings in hotel developments; Analise da aplicacao da etiquetagem de eficiencia energetica de edificacoes em empreendimentos hoteleiros

Energy Technology Data Exchange (ETDEWEB)

Santos, Myrthes Marcele Farias dos; Faria, Ricardo Wargas de; Hamada, Luciana; Nascimento, Paulo Roberto Lopes do [Servico Brasileiro de Apoio as Micro e Pequenas Empresas (SEBRAE), Rio de Janeiro, RJ (Brazil). Programa de Energia e Eficiencia Energetica

2010-07-01

Most Brazilian constructions have low performance in terms of energy, since they received little attention (or none) concerning the energy efficiency. One of the main aspects observed is the intense use of electric energy for climatization and lighting in order to provide comfortable conditions for the dwellers. In 2009, new perspectives to change this situation emerged, due to an initiative by the Federal Government, that established the necessary regulations for energy efficiency labelling in buildings, and broadened the Brazilian Labelling Program (PBE), which, up until then, encompassed only machinery and equipment. The purpose of this article is to analyze the compliance with the new regulations for energy efficiency of constructions in the hotel sector, where small businesses are predominant, aiming at highlighting the barriers and opportunities connected to the possibilities of labeling. Hotels have been targeted for large investments, since they have become the pillars of Brazil's project to welcome tourists during the 2014 World Cup and the 2016 Olympic Games. Taking into consideration the need to develop specific methodologies for lodging possibilities, in addition to the scarce information on the use of energy in small businesses, this article is part of a series of researches carried out within the framework of the Sebrae/RJ - Procel Agreement. The outcome is a global analysis, from a business point of view, on the use of labels of energy efficiency in hotel buildings, organized upon two perspectives: the external environment (opportunities and threats) and the internal environment (strong and weak points). (author)

The Marine Magnetotelluric Method (MMT) applied of hydrocarbons exploration in Brazilian waters; Aplicacao do Metodo Magnetotelurico Marinho (MMT) na exploracao de hidrocarbonetos em aguas brasileiras

Energy Technology Data Exchange (ETDEWEB)

Pinto, Vinicius R.; Flexor, Jean M.; La Terra, Emanuele F.; Fontes, Sergio L. [Observatorio Nacional do Brasil, Rio de Janeiro, RJ (Brazil); Lugao, Patricia P. [Schlumberger, Rio de Janeiro, RJ (Brazil). Western-Geco

2008-07-01

Magnetotellurics (MT) is a natural-source, electromagnetic geophysical method of imaging structures below the earth's surface. It is used to map the subsurface Earth's resistivity by measuring the naturally occurring electric and magnetic fields at the Earth's surface. These natural EM fields are generated in the Earth's atmosphere mainly by lightning strokes and by interactions between the solar wind and the ionosphere. Natural variations in the earth's magnetic field induce electric currents (or telluric currents) under the earth's surface. Concurrent measurements of orthogonal components of the electric and magnetic fields allow for the calculation of the impedance tensor, which is complex and frequency-dependent and from which it is possible to gain insight into the resistivity structure of the surrounding material. The marine magnetotelluric method (MMT) is the application of MT method to investigate the sea-floor resistivity's distribution. A MMT sounding with 96 stations was realized in the region of Santos Basin on a subsalt section to assist the interpretation of seismic data in order to estimate the depth of base of the salt (subsalt) since this imaging in general is problematic. The high contrast of the electrical resistivity between the salt and the surrounding sediments is an excellent objective and it constitutes a great opportunity to test the applicability of the MMT method in oil exploration studies. The geological interpretation of the seismic profile of the studied area shows the existence of several bodies of salt with depths of the base that could vary more from 7000 m to more than 9000 m. The top of the body of more important salt of the profile begins to the 3500 m and your base is not solved by the seismic sign that it reaches a maximum depth of 9000 m. The MMT data of the central profile were submitted an inversion procedure - 2D by using the non linear conjugate gradients that produces smooth models for the resistivity structure. The TE and TM modes were used simultaneously for the inversion, with admitted errors of 6%, for the resistivity and the phase. The inversions produced resistivity anomalies well delimited with a correct estimate of the position and of the depth reached by the bodies of salt. (author)

Study of conditions of iron-resonance in the transformers switching - application examples; Estudo de condicoes de ferro-ressonancia na manobra de transformadores. Exemplos de aplicacao

Energy Technology Data Exchange (ETDEWEB)

Portela, C; Sondermann, M A; Teixeira, J [ELETROSUL, Curitiba, PR (Brazil)

1988-12-31

This work identifies the iron-resonance conditions, in the switching of transformer powering from a long line, and an analysis in the frequency-time domain, with representation in detail of the saturation and hysteresis, so that we can to dimension the basic corrective instruments and to determine the correspondent parameters. Besides, it presents an hybrid analysis with more details, used for verification and confirmation of the previous processes 6 refs., 7 figs.

Analysis of implementation of energy efficiency labeling of buildings in hotel developments; Analise da aplicacao da etiquetagem de eficiencia energetica de edificacoes em empreendimentos hoteleiros

Energy Technology Data Exchange (ETDEWEB)

Santos, Myrthes Marcele Farias dos; Faria, Ricardo Wargas de; Hamada, Luciana; Nascimento, Paulo Roberto Lopes do [Servico Brasileiro de Apoio as Micro e Pequenas Empresas (SEBRAE), Rio de Janeiro, RJ (Brazil). Programa de Energia e Eficiencia Energetica

2010-07-01

Most Brazilian constructions have low performance in terms of energy, since they received little attention (or none) concerning the energy efficiency. One of the main aspects observed is the intense use of electric energy for climatization and lighting in order to provide comfortable conditions for the dwellers. In 2009, new perspectives to change this situation emerged, due to an initiative by the Federal Government, that established the necessary regulations for energy efficiency labelling in buildings, and broadened the Brazilian Labelling Program (PBE), which, up until then, encompassed only machinery and equipment. The purpose of this article is to analyze the compliance with the new regulations for energy efficiency of constructions in the hotel sector, where small businesses are predominant, aiming at highlighting the barriers and opportunities connected to the possibilities of labeling. Hotels have been targeted for large investments, since they have become the pillars of Brazil's project to welcome tourists during the 2014 World Cup and the 2016 Olympic Games. Taking into consideration the need to develop specific methodologies for lodging possibilities, in addition to the scarce information on the use of energy in small businesses, this article is part of a series of researches carried out within the framework of the Sebrae/RJ - Procel Agreement. The outcome is a global analysis, from a business point of view, on the use of labels of energy efficiency in hotel buildings, organized upon two perspectives: the external environment (opportunities and threats) and the internal environment (strong and weak points). (author)

Application of fuzzy logic in mapping the environmental impacts of hydroelectric power plants; Aplicacao da logica difusa no mapeamento de impactos ambientais em usinas hidreletricas

Energy Technology Data Exchange (ETDEWEB)

Melo, M.N.; Lambert-Torres, G.; Silva, L.E. Borges da [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)], Emails: germanoltorres@gmail.com, leborges@unifei.edu.br; Rissino, S.; Silva, M.F. da [Universidade Federal de Rondonia (UFRO), Porto Velho, RO (Brazil)], e-mails: srissino@gmail.com, felipe@unir.br

2009-07-01

During the stages prior to installation of a large enterprise, there is an obligation to obtain an environmental license for its effectiveness. However, defining the relevance of an environmental impact generated by changes elapsed in a region, is something subjective, since some variables present qualitative definitions. Aiming to interrelate the variables that influence the environmental impacts in hydroelectric plants, was made the mapping of terms natural resources and degradation of the environment, and its defining variables, based on the theory of fuzzy logic. The construction of fuzzy propositions was based on the manipulation of a rule base, with the 'if' antecedent 'then' consequent structure. It was concluded that the use of fuzzy propositions for the study of environmental impact is an effective method to map the environmental impact caused by construction of a hydroelectric plant, because it defines the degree of influence of impact on the environment.

Implementation of the fuzzy theory in control of alternative energy generation system; Aplicacao da teoria fuzzy no controle de sistemas de geracao de energias alternativas

Energy Technology Data Exchange (ETDEWEB)

Caneppele, Fernando de Lima [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Curso de Pos-Graduacao em Energia na Agricultura], E-mail: fernando@itapeva.unesp.br; Seraphim, Odivaldo Jose [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural], E-mail: seraphim@fca.unesp.br

2010-07-01

This paper presents the application and use of a methodology based on fuzzy theory and simulates its use in intelligent control of a hybrid system for generating electricity, using solar energy, photovoltaic and wind. When using a fuzzy control system, it reached the point of maximum generation of energy, thus shifting all energy generated from the alternative sources-solar photovoltaic and wind, cargo and / or batteries when its use not immediately. The model uses three variables used for entry, which are: wind speed, solar radiation and loading the bank of batteries. For output variable has to choose which of the batteries of the battery bank is charged. For the simulations of this work is used MATLAB software. In this environment mathematical computational are analyzed and simulated all mathematical modeling, rules and other variables in the system described fuzzy. This model can be used in a system of control of hybrid systems for generating energy, providing the best use of energy sources, sun and wind, so we can extract the maximum energy possible these alternative sources without any prejudice to the environment. (author)

Electrochromism: basis and application of nanomaterials in development of high performance electrodes; Eletrocromismo: fundamentos e a aplicacao de nanomateriais no desenvolvimento de eletrodos de alto desempenho

Energy Technology Data Exchange (ETDEWEB)

Quintanilha, Ronaldo C.; Rocha, Igor; Vichessi, Raquel B.; Lucht, Emili; Naidek, Karine; Winnischofer, Herbert; Vidotti, Marcio [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Departamento de Quimica

2014-07-01

This review deals with the basis and novel trends in electrochromism, describing the basic aspects and methodologies employed for the construction and analyses of different modified electrodes. The work presents the classic materials used for the construction of electrochromic electrodes, such as WO{sub 3} and a view on the basic concepts of chromaticity as a useful approach for analyzing colorimetric results. The report also addresses how the incorporation of nanomaterials and the consequent novel modification of electrodes have furthered this area of science, producing electrochromic electrodes with high performance, high efficiency and low response times. (author)

Artificial intelligence applied to natural products; computer study of pimarane diterpene. Aplicacao da inteligencia artificial em quimica de produtos naturais: estudo, por computador, dos diterpenos pimaranicos

Energy Technology Data Exchange (ETDEWEB)

Lopes, M N; Borges, J H.G.; Furlan, M; Gastmans, J P [UNESP, Araraquara, SP (Brazil). Dept. de Quimica Organica; Emerenciano, V de [Sao Paulo Univ., SP (Brazil). Dept. de Quimica Organica

1989-01-01

This paper describes the study of the sup(13)C NMR characteristic signals of naturally occurring pimarane. The analysis is performed by computer, starting from a data base which encloses about 400 diterpenes and using the PICKUPS programm. By this way it is possible to analyse substructure from one to five atoms as well as the effects of substituents on them. (author).

Application of oil spill environmental vulnerability analysis to Brazilian road networks for hazardous cargo transportation; Aplicacao do indice de vulnerabilidade rodoviario para transporte de cargas perigosas

Energy Technology Data Exchange (ETDEWEB)

Mattos, M. Beatriz da Costa; Silva Junior, Carlos Leandro da; Almeida, Ana Flavia Oliveira de [Ambipetro Consultoria em Meio Ambiente e Petroleo Ltda., Natal, RN (Brazil)

2008-07-01

Roads provide the main means of transportation in Brazil. According to data from the Brazilian Department of Infrastructure and Transport, 96.2% of the passenger transportation and 61.8% of the cargo transportation are based on road infrastructure. However, three quarters of the Brazilian roads are in terrible, unsatisfactory or generally inadequate condition. Poor road conditions are responsible for a great number of accidents with severe consequences for the population and the environment. Given the importance of this matter, there is a need to develop an intelligent system for automatic classification of social and environmental sensitivity maps in order to support actions that respond to emergencies and to help in transportation planning, especially considering the heavy movement of hazardous cargoes such as petroleum and its derivates. For this, tools such as Geographic Information System (GIS) allow social-environmental and traffic engineering characterization maps to be analyzed on a unified, geo referenced digital base. This way, administrators can estimate which stretches of the network are more environmentally sensitive and which pose greater risks, and therefore draw inferences on the most socially and environmentally vulnerable. Social and environmental vulnerability data not only help in the classification of the areas which pose the greater risks, but also make it possible to decide on emergency support points, creating a culture of prevention in the area of hazardous cargo transportation. The case study on the state of Rio Grande do Norte provides a measure of the importance of such work. The city of Natal - the state capital - and the Guamare petrochemical facility are interconnected by 180 Km Road, on which more than 100 tanker trucks loaded with diesel and its derivates travel every day. This road is classified as in poor conditions and, according to the Brazilian Roads Police, it is one of the most dangerous. The relevance of this work is to show how information consolidated to a single database, geo referenced in a GIS, can assist planning for the safe transport of oil and hazardous cargoes, benefiting not only the state's population but the environment as a whole. (author)

Development and application of a pediatric head phantom for dosimetry in computed tomography; Desenvolvimento e aplicacao de um simulador pediatrico craniano para dosimetria em tomografia computadorizada

Energy Technology Data Exchange (ETDEWEB)

Martins, Elaine Wirney

2016-11-01

To determine the exposure levels and the absorbed dose in patients undergoing CT scans, is necessary to calculate the CT dose index in measurements with a PMMA or water phantom. The phantom must be enough to simulate the attenuation and scattering characteristics of a human body or parts in a radiation field. The CT specific quantities : CT air kerma index (Ca,100) , weighted CT air kerma index (CW ), a total volume CT air kerma index (Cvol) and the CT air kerma-length product (PKL) must be determined and compared to literature reference levels. In this work a head pediatric phantom was developed, considering that the Brazilian published Diagnostic Reference Levels (DRL) are based on adult phantom measurements. This developed phantom shows a construction innovation using materials to simulate the skullcap, cortical bone (aluminum) and cancellous bone (PVC), and it was filled with distilled water. The phantom dimension follows the recommendations of the World Health Organization and the International Commission on Radiation Units for children from 0 to 5 years old head size: diameter of 160 mm and height of 155 mm. The skullcap has 4 mm of thickness and 111.9 mm of internal diameter. In order to evaluate its behavior, tests were carried out in calibration laboratories and in clinical beams. The results showed attenuation up to 23% when different materials are used as skullcap, demonstrating that the DRLs adopted could be overestimating the dose received by pediatric patients. It is observed that the dose received by CT skull scans presents different distribution, due to the skullcap partially attenuation and/or backscattering which is not considered when the PMMA phantom is used.

Evaluation of solid waste and plastic clay mixtures for structural ceramic use; Avaliacao de misturas de residuo solido com argila plastica para aplicacao em ceramica vermelha

Energy Technology Data Exchange (ETDEWEB)

Silva, Neli Iloni Warpechowski da [Fundacao de Ciencia e Tecnologia (CIENTEC), Porto Alegre, RS (Brazil); Belo, Pedro [Ceramics Representacoes Comerciais Ltda, Porto Alegre, RS (Brazil)

1996-07-01

This work aims to verify the behaviour of the organic solid waste added by 10%, 15% and 20% in mixture in a plastic clay. It intends to emphasize the influence of the waste in the mixture. Technology tests have been carried out in the clay and mixtures to obtain possible uses in the structural ceramics. (author) 1 ref., 4 figs., 2 tabs.

Planning under uncertainties paradigm - application to electric power distribution systems planning; Paradigma de planejamento sob incertezas - aplicacao ao planejamento dos sistemas de distribuicao de energia eletrica

Energy Technology Data Exchange (ETDEWEB)

Bianchi Junior, Alberto

1996-12-31

In this work it is presented an original methodology of multistage planning, with conflictive objectives and restrictions, incorporating the concept of uncertainties. To do so, the proposed paradigm is based on the Dynamic Programming which comprehends the multistage subject to conflictive restrictions; on the Fuzzy Sets Theory, through the decisions and fuzzy numbers, which model the uncertainties and ambiguous decisions referent to qualitative variables; and on the consideration of evolutional rules associated to network flow algorithm. In its conceptual elaboration, the paradigm is developed in a very ample way, of generalized application to a well defined class of planning problems Particularly, the model fits in the flexible planning, which has been very discussed in the recent literature. Flexible planning must be understood as the one which allows to the planner, under well-defined limits, the evaluation of the planning policy composed by strips of options (discreet or continuous), associated to uncertainty levels related to the real world. In order to validate and consolidate the theoretic concepts, it was elaborated an algorithm turned to the aggregated planning of the distribution of electric energy, that presents intrinsic characteristics which are perfectly fitted in the paradigm`s applicability. (author) 41 refs., 26 figs., 36 tabs.

Conductor polymeric membranes with potential for application in PEM type fuel cells; Membranas polimericas condutoras com potencialidades para aplicacao em celulas a combustivel do tipo PEM

Energy Technology Data Exchange (ETDEWEB)

Brioude, Michel de Meireles; Sodre, Livia Farias; Boaventura Filho, Jaime Soares; Jose, Nadia Mamede [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil)

2006-07-01

In this work two series of membranes were prepared; they were based on hybrid organic-inorganic or composite materials and presented potentiality for application in Proton Exchange Membrane Fuel Cell, PEMFC. The polymeric phase was constituted of poly(dimethylsiloxane), PDMS, crosslinked with tetra ethoxysilane, TEOS, with a 70%/30% ratio. Phosphotungstic acid (PWA) or the sodium monododecylsulphate (MDS), as proton conductors, were added to the inorganic network, close to the gel point; the mixtures were transferred to a cast. The films were characterized by infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The membranes showed good properties, as flexibility, thermal and mechanical stability with potentiality to be used as conducting membranes in technological applications. (author)

Planning under uncertainties paradigm - application to electric power distribution systems planning; Paradigma de planejamento sob incertezas - aplicacao ao planejamento dos sistemas de distribuicao de energia eletrica

Energy Technology Data Exchange (ETDEWEB)

Bianchi, Junior, Alberto

1997-12-31

In this work it is presented an original methodology of multistage planning, with conflictive objectives and restrictions, incorporating the concept of uncertainties. To do so, the proposed paradigm is based on the Dynamic Programming which comprehends the multistage subject to conflictive restrictions; on the Fuzzy Sets Theory, through the decisions and fuzzy numbers, which model the uncertainties and ambiguous decisions referent to qualitative variables; and on the consideration of evolutional rules associated to network flow algorithm. In its conceptual elaboration, the paradigm is developed in a very ample way, of generalized application to a well defined class of planning problems Particularly, the model fits in the flexible planning, which has been very discussed in the recent literature. Flexible planning must be understood as the one which allows to the planner, under well-defined limits, the evaluation of the planning policy composed by strips of options (discreet or continuous), associated to uncertainty levels related to the real world. In order to validate and consolidate the theoretic concepts, it was elaborated an algorithm turned to the aggregated planning of the distribution of electric energy, that presents intrinsic characteristics which are perfectly fitted in the paradigm`s applicability. (author) 41 refs., 26 figs., 36 tabs.

Development of crystals based in cesium iodide for application as radiation detectors; Desenvolvimento de cristais baseados em iodeto de cesio para aplicacao como detectores de radiacao

Energy Technology Data Exchange (ETDEWEB)

Pereira, Maria da Conceicao Costa

2006-07-01

Inorganic scintillators with fast luminescence decay time, high density and high light output have been the object of studies for application in nuclear physics, high energy physics, nuclear tomography and other fields of science and engineering. Scintillation crystals based on cesium iodide (CsI) are matters with relatively low higroscopy, high atomic number, easy handling and low cost, characteristics that favor their use as radiation detectors. In this work, the growth of pure CsI crystals, CsI:Br and CsI:Pb, using the Bridgman technique, is described. The concentration of the bromine doping element (Br) was studied in the range of 1,5x10{sup -1} M to 10{sup -2} M and the lead (Pb) in the range of 10{sup -2} M to 5x10{sup -4} M. To evaluate the scintillators developed, systematic measurements were carried out for luminescence emission and luminescence decay time for gamma radiation, optical transmittance assays, Vickers micro-hardness assays, determination of the doping elements distribution along the grown crystals and analysis of crystals response to the gamma radiation in the energy range of 350 keV to 1330 keV and alpha particles from a {sup 241}Am source, with energy of 5.54 MeV. It was obtained 13 ns to 19 ns for luminescence decay time for CsI:Br and CsI:Pb crystals. These results were very promising. The results obtained for micro-hardness showed a significant increase in function of the doping elements concentration, when compared to the pure CsI crystal, increasing consequently the mechanical resistance of the grown crystals. The validity of using these crystals as radiation sensors may be seen from the results of their response to gamma radiation and alpha particles. (author)

Implementation of ozonation process in degradation of the phenols present in petrochemistry effluents; Aplicacao do processo de ozonizacao na degradacao de fenois presentes em efluentes petroquimicos

Energy Technology Data Exchange (ETDEWEB)

Souza, Fernanda Batista de; Souza, Antonio Augusto Ulson de; Souza, Selene Maria Arruda Guelli Ulson de [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil)

2008-07-01

The water contamination by the petrochemical pollutants with high toxicity, such as phenols, is a subject of interest of several researchers. The ozone is an alternative for the effluents treatment, being effective in environmental decontamination, reducing the COD and degrading the phenols. The ozone stability depends on the water pH, the type and content of organic matter. This study aimed to investigate in the phenol ozonation, evaluating the phenol and COD removal at different pHs. Ozone as injected in 5 L of phenol solution of 50 mg L-1 at pH = 2, 7 and 10, from 1 to 25 minutes, and then was measured the quantity of COD and phenol. It was found that in acid pH the ozone has increased the stability, because 82.19% of the ozone that enters in the column remains in solution. The phenol degradation was faster in alkaline solution (pH=10), where in 15 minutes of treatment, 99.7% of phenol was consumed. The COD removal increased from 7.3% in 6 minutes to 87.8% in 30 minutes, but the COD removal increases more slowly than that of phenol which was 53, 8% in 6 min, increasing to 99.2% at 25 min for pH=7. (author)

Commutated inversor at low frequency for application of fuel cells in distributed generation; Inversor comutado em baixa frequencia para aplicacao de CaCs na geracao distribuida

Energy Technology Data Exchange (ETDEWEB)

Martins, Geomar Machado; Pomilio, Jose Antenor; Vendrusculo, Edson A. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Eletrica e de Computacao], e-mail: antenor@dsce.fee.unicamp.br

2004-07-01

The connection of Fuel Cell Power Plants with the utility grid generally needs an electronic power converter for processing the locally generated power and injecting current into the system. Since the source provides a DC voltage, the converter must be able to produce a low-distortion, high-power factor AC current. This paper presents the results obtained with use of a three-phase and a single-phase inverter using low-frequency commutation. An auxiliary circuit is added to the inverter topologies in order to reduce the output voltage distortion, thus improving the current waveform. The main advantages of this approach are the minimization of the switching losses (i.e. high efficiency) and the elimination of the EMI (which avoids high-frequency filters necessary in high-frequency commutation inverters). (author)

Application of phase diagrams to obtain a new surfactant-based fracturing gel; Aplicacao de diagrama de fases para obtencao de um novo gel de fraturamento hidraulico

Energy Technology Data Exchange (ETDEWEB)

Dantas, Tereza N. de Castro; Santana, Vanessa C.; Dantas Neto, Afonso A.; Franca Neta, Luzia S. de; Albuquerque, Heraldo S. [Rio Grande do Norte Univ., Natal, RN (Brazil)]. E-mail: tereza@eq.ufrn.br

2003-07-01

Through pseudo ternary phases diagram was defined a gel area with the objective of obtaining a new surfactant-based fracturing gel. The surfactant used was synthesized from regional vegetable oil. Fracturing gel properties, like: viscosity, leak off coefficient and proppant-settling rate were analyzed. The obtained results with the surfactant-based gel had its properties compared with a HPG-based gel (hydroxypropyl guar). Rheological tests was accomplished at 100 s{sup -1} being varied the temperature from 26 to 86 deg C, where the surfactant-based gel showed great results. The leak off coefficient was determined by static filtration and the new gel presented smaller coefficient in relation to the HPG gel. The proppant-setting rate was also determined in the gel and, the surfactant-based gel showed good static proppant support. One can conclude that obtained gel presents compatible characteristics when compared with the HPG gel, without the inconvenience of leaving insoluble residues in the well. (author)

Study of nanostructured clay's application in photoactivated restorative resins, used in dentistry; Estudo da aplicacao de argilas nanoestruturadas em resinas restauradoras fotoativadas, utilizadas em odontologia

Energy Technology Data Exchange (ETDEWEB)

Campos, Luiza Melo de Paiva

2012-07-01

The problem caused by polymerization shrinkage is critical, because the resin must remain closely in the tooth cavity while gaining rigidity and decrease its dimensions. Forcing the restorative material to distance or to separate the walls of the cavity, the resulting disruption would lead to microleakage, responsible for other problems such as secondary caries, postoperative soreness and may even cause pulpal changes. This process induces the volumetric change of the compound, given by the union of radicals in the formation of the macromolecule (polymer), causing a decrease in volume. This study aimed to develop new experimental composites through the addition of nano components clay minerals in a polymer matrix-based BisGMA / TEGDMA, to evaluate the possibility of a different dimensional behavior during the polymerization. Were used in this study, experimental composites added nanoparticle clay MMT Cloisite 10A (at concentrations of 50, 55, 60, 65 and 70 wt%) and Cloisite 30B (at concentrations of 50, 55, 60 and 65 wt%), which were then compared with the performance of the experimental composites added with micro-particles of silanized silica hybrid Aerosil OX-50 (at concentrations of 50, 60, 65 and 70 wt%). Was used the methods of characterization: Scanning Electron Microscopy (SEM), Thermal-Mechanical Analysis (TMA), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Absorption Spectroscopy in the Region of the Infrared (FTIR), X-ray Diffraction (XRD), Micro Hardness Knoop, Holographic Interferometry Technique (HIT), Digital Holography (DH), Correlation Image (CI) and Thermography. It was observed that the experimental composites with nanoparticles added clay Cloisite 10A and Cloisite 30B, performed better on tests that measured the polymerization shrinkage (TMA, HIT/HD/IC) and the micro hardness (Knoop), in relation to composites added with Silica Aerosil OX-50. These results may be related to the interaction polymer/clay and the nano composites formation, observed by XRD analysis. Among the nanoparticles studied, the Cloisite 30B showed the most significant results in relation to the nanoparticle Cloisite 10A and this can be attributed to chemical affinity and polar nature of that nanoparticle. (author)

Development and characterization of high collapse boron alloys heat treated pipes for oil wells; Tubos de aco TiB para aplicacao em revestimento de pocos de petroleo

Energy Technology Data Exchange (ETDEWEB)

Moreira, Fabio A.; Silva, Ronaldo; Chad, Luis [Tenaris Confab, Pindamonhangaba SP (Brazil); Fritz, Marcelo C. [Tenaris Confab, Pindamonhangaba SP (Brazil). Dept. de Engenharia do Produto

2008-07-01

The utilization of OCTG (Oil Country Tubular Goods) pipes will increase with the discovery of new oil wells in ultra deep waters. This study aims to evaluate the mechanical and microstructural performance of welded and heat treated pipes through quenching and tempering using a steel project based in titanium/boron for casing pipes. The objective of this development is to present a set of techniques used during the manufacturing of heated treated ERW pipes boron allowing, discussing mechanical and metallurgical aspects of the steel project, coil conformation, heat treatment and test procedures. The results are within the limits set by the API 5CT standard. It was found that the pipes obtained good geometry and uniformity of mechanical properties, showing that this product can be applied safely and reliability as wells' casing. (author)

Study and development of an Iridium-192 seed for use in ophthalmic cancer; Estudo e desenvolvimento de uma semente de iridio-192 para aplicacao em cancer oftalmico

Energy Technology Data Exchange (ETDEWEB)

Mattos, Fabio Rodrigues de

2013-07-01

Even ocular tumors are not among the cases with a higher incidence, they affect the population, especially children. The Institute of Energy and Nuclear Research (IPEN-CNEN/SP) in partnership with Escola Paulista de Medicina (UNIFESP), created a project to develop and implement a alternative treatment for ophthalmic cancer that use brachytherapy iridium-192 seeds. The project arose by reason of the Escola Paulista treat many cancer cases within the Unified Health System (SUS) and the research experience of sealed radioactive sources group at IPEN. The methodology was developed from the available infrastructure and the experience of researchers. The prototype seed presents with a core (192-iridium alloy of iridium-platinum) of 3.0 mm long sealed by a capsule of titanium of 0.8 mm outside diameter, 0.05 mm wall thickness and 4,5mm long. This work aims to study and develop a seed of iridium-192 from a platinum-iridium alloy. No study on the fabrication of these seeds was found in available literature. It was created a methodology that involved: characterization of the material used in the core, creation of device for neutron activation irradiation and and seed sealing tests. As a result, proved the feasibility of the method. As a suggestion for future work, studies regarding metrology and dosimetry of these sources and improvement of the methodology should be carried out, for future implementation in national scope. (author)

Application of biomass in oil and fat reduction content in aqueous effluent; Aplicacao de biomassa na reducao do teor de oleos e graxas presentes em efluentes aquosos

Energy Technology Data Exchange (ETDEWEB)

Boni, Hevelin Tabata; Souza, Antonio Augusto Ulson de; Souza, Selene Maria de Arruda Guelli Ulson de [Universidade Federal de Santa Catarina (UFSC), SC (Brazil)

2012-07-01

In this work, we have studied the bagasse from sugarcane as an alternative bioadsorbent in the treatment to oils and greases contaminated waters. The synthetic effluent was simulated by a distilled water and decahydronaphthalene dispersion, with initial concentration of 8900 mg . L {sup -1}. Gas chromatography was the analytical operation chosen to quantify the oil residual after the adsorption. The biomass was characterized by moisture analysis, CHNS and SEM. The experiments were carried out in batch process with agitation of 120 rpm, evaluating the equilibrium time of adsorptive process and the influence of pH of aqueous level. Results showed that the adsorption process achieved equilibrium quickly, in just 5 minutes of contact between the dispersion and biomass. No significant influence was noticed in the removal of hydrocarbon with the change in pH. The adsorption isotherm was developed changing by the mass of bioadsorbent, at 25 deg C, pH 6 and 120 rpm of agitation. The experimental results were fitted by Langmuir and Langmuir- Freundlich models. The best fit was obtained with Langmuir-Freundlich, providing a maximum adsorption capacity of 6,65 g hydrocarbon / g biomass. The experiments showed the great potential of the sugarcane bagasse to be used as bioadsorbent in reducing the oil and grease levels in industrial effluents. This alternative presents itself as a sustainable route due to the abundance of sugar cane bagasse in the sugar and alcohol industry, avoided the impact of aqueous sources contamination coming from oil and petrochemical industry. (author)

Application of the electrophoretic deposition technique for obtaining Yttria-stabilized zirconia tubes; Aplicacao da tecnica de deposicao eletroforetica para a obtencao de tubos ceramicos de zirconia-itria

Energy Technology Data Exchange (ETDEWEB)

Caproni, E.; Muccillo, R., E-mail: ecaproni@gmail.com, E-mail: muccillo@usp.br [Centro de Ciencia e Tecnologia de Materiais, Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2012-01-15

The electrophoretic deposition (EPD) is recognized as the most versatile technique for processing particulate materials, due to low cost, deposition in minutes and forming of pieces with complex geometry shapes. In this work an experimental setup for the simultaneous conformation of 16 ceramic tubes by EPD was built. Bimodal submicron Yttria-stabilized zirconia particles were deposited into graphite electrodes, after suitably adjusting the rheological characteristics of the suspension in isopropanol. After graphite burning and YSZ sintering at 1500 deg C, the ceramic tubes were characterized by X-ray diffraction, scanning probe microscope, impedance spectroscopy and electrical response as a function of oxygen content. Small dense one end-closed ceramic tubes, fully stabilized in the cubic phase, were successfully obtained by the EPD technique, showing the ability of that technique for processing large quantities of tubular solid electrolytes with electrical response to different amounts of oxygen according to the Nernst law (author)

Chemometrics application in fuel's MTR type chemical characterization by X-ray fluorescence; Aplicacao da quimiometria para caracterizacao quimica de combustiveis tipo MTR por fluorescencia de raios-X

Energy Technology Data Exchange (ETDEWEB)

Silva, Clayton Pereira da

2012-07-01

In Brazil and worldwide the nuclear power has occupied a prominent position with many applications in industry, power generation, environment and medicine, improving the quality of tests and treatments, therefore people's lives. Uranium is the main element used in nuclear facilities and it s employed as base material to generation of electricity in the manufacture of radiopharmaceuticals. In the '50s, during the Cold War, the then newly created International Atomic Energy Agency proposed to oversee nuclear facilities and encourage the manufacture of nuclear fuels with low-enriched uranium (LEU) fuel came then type Material Test Reactor (MTR), manufactured initially in U{sub 3}O{sub 8} and U{sub 3}Si{sub 2} later, both dispersed in aluminum. The use of this technology requires a constant improvement of all processes involving the manufacture of MTR subject to several international protocols, which seek to ensure the reliability of the fuel from the standpoint of practical and environmental. In this context, the control of impurities, from the point of view of neutron economy, directly affects the quality of any nuclear fuel, so strict control is necessary. The literature has reported procedures which, beyond generating residues, are lengthy and costly, they need calibration curve and consequently reference materials. The aim of this work is to establish and validate a methodology for nondestructive quantitative chemical analysis, low cost and analysis time, as well as minimize the generation of waste, for multielement determination of major constituents (Utotal and Si) and impurities (B, Mg, Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd and others) present in U3O8 and U{sub 3}Si{sub 2}, meeting the needs of nuclear reactors in the nuclear fuel qualification type MTR. For that purposes, will be applied the X-ray fluorescence technique which allows fast chemical and nondestructive analysis, aside from sample preparation procedures that do not require previous chemical treatments (dissolving, digesting, and others). To corrections like effects of spectral and matrix were applied and evaluated the fundamental parameter method, univariate calibration curve and multivariate calibration. The results were compared by means of statistical tests in accordance with ISO 17025 in MRCs (123 (1-7) and 124 (1-7)) MCRs of U{sub 3}O{sub 8} from New Brunswick Laboratory (NBL) and 16 U{sub 3}Si{sub 2} samples provided by CC of IPEN/CNEN-SP. The chemometrics is a promising method to determination of minor and major constituents on the U3Si2 and U3O8 basis nuclear fuel, because the precision and accuracy are statistically equal volumetric analysis, gravimetric and ICPOES methods. (author)

AAA application in diagnosis exams in a large public hospital, RS, Brazil; Aplicacao do AAA na realizacao de exames diagnosticos em um hospital publico de grande porte

Energy Technology Data Exchange (ETDEWEB)

Bacelar, A.; Ferret, A.A.; Vanni, S.; Galhardi, M.P.; Lykawka, R., E-mail: abacelar@hepa.ufrgs.br, E-mail: allferret@gmail.com, E-mail: svanni@hepa.ufrgs.br, E-mail: mpgalhardi@gmail.com, E-mail: rlykawka@hepa.ufrgs.br [Hospital de Clinicas de Porto Alegre (HCPA), Porto Alegre, RS (Brazil)

2013-10-01

Objective: the initiative AAA - Awareness , Appropriateness and Audit , promotes consciousness ( Awareness) , fitness ( Appropriateness ) and Audit ( Audit) . This paper analyzes the application of the concept in the AAA requests and justifications examinations using ionizing radiation within a large public hospital. Materials and methods: we collected and analyzed data between the years 2011 and 2012, concerning the number of exams performed with the use of radiation and their justifications. After, we sought to raise awareness of the clinical team through training on the risks and benefits of the various modalities of the radiology department and the need to justify the use of ionizing radiation on health. After the data were collected again of test requests for verification of the effectiveness of training. Results: the mean requests that need to be appropriate to the AAA in the last quarter of 2011 was 75 % lower than the average demands of the first quarter, matched against the last two months of 2012 increased by up to four times the number requests that require improvements in relation to the excellent results obtained in July 2012. Conclusion: it is shown in this paper the need of implementing this initiative AAA continuously added to the clinical staff awareness about the risk of the use of ionizing radiation, the appropriateness of the requests of these tests , as well as the control of this process in order to optimize use of ionizing radiation on health.

Cooperative research and the carbon fiber development for application in uranium centrifuges project; Pesquisa cooperativa e o desenvolvimento de fibra de carbono para aplicacao em ultracentrifugas nucleares

Energy Technology Data Exchange (ETDEWEB)

Queiroz, Paulo Cesar Beltrao [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), Sao Paulo, SP (Brazil)], e-mail: paulocbqueiroz@gmail.com; Zouain, Desiree Moraes [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: dmzouain@ipen.br

2009-08-15

This paper analyzes both the carbon fiber-based development for uranium centrifuges and the research project that supports its development effort over time. The carbon fibre-based engineering properties make it a valuable supply for high technological products, such as uranium ultracentrifuge. There is no production of such fibers in Brazil. Its trade is subject to international market restrictions due to carbon fibers' dual applications. The Centro Tecnologico da Marinha em Sao Paulo (CTMSP), the Universidade de Campinas (UNICAMP), the Universidade de Sao Paulo (USP), the RADICIFIBRAS Company, and the Financiadora de Estudos e Projetos (FINEP), which is responsible for the project financial support, established a partnership aiming the development of a domestic polyacrylonitrile (Pan)-based carbon fiber industry. Such alliances or technological partnerships are best known in developed countries, such as USA and Japan, as Cooperative Research or Research Joint Ventures (RJV). (author)

Application of activation analysis for determination of some elements in cassiterite samples; Aplicacao da analise por ativacao para a determinacao de alguns elementos em amostras de cassiterita

Energy Technology Data Exchange (ETDEWEB)

Armelin, Maria Jose Aguirre

1978-07-01

This work consists in the development of an analytical method using activation by thermal neutrons for the determination of some minor elements and traces present in cassiterite (tin ore). This method was then applied to determine these elements in samples of cassiterite from different regions of Brazil. An analysis was made of the mineralogy characteristic of cassiterite as well as of the minerals most commonly associated with it. Four main types of interference were found to occur in the analysis by activation of trace elements in samples of cassiterite. The method involves the analysis without chemical separation for the determination of some elements and the analysis with chemical separation for the determination of other elements. The steps involved in both types of analysis are described. In the analysis with chemical separation the matrix element (tin) is separated by distillation in an H{sub 2}SO{sub 4}-HBr medium, after fusion of the ore with Na{sub 2}O{sub 2}. Arsine and antimony are determined in the distilled, whereas some lanthanide elements and uranium are determined in the distillation residue by separating them as a group by precipitation with lanthanum fluoride. A discussion on the precision, accuracy and sensibility of the method is also included. (author)

Technical application of Fuzzy logic in the construction of an energy sustainability index; Aplicacao das tecnicas de logica fuzzi na construcao de um indice de sustentabilidade energetica

Energy Technology Data Exchange (ETDEWEB)

Santos, Francisco Carlos B. dos; Carneiro, Alvaro Luiz Guimaraes [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Sao Paulo - SP (Brazil)], E-mails: fcarlos@usp.br, carneiro@ipen.br

2010-11-15

Aggregation tools database and subsequent interpretation are the most challenge in the area of sustainability This task becomes very complex due to correlation of topics that comprise the dimensions that form the basis of the concept of sustainable development. The technique known as Fuzzy Logic or Fuzzy Logic is a powerful tool to capture information on vacancies, which is often the only information available in the area of sustainability. (author)

Electronic structure of the Y Ba{sub 2} Cu{sub 3} O{sub 7-x} high temperature superconductor ceramic; Estrutura eletronica da ceramica supercondutora de alta temperatura Y Ba{sub 2} Cu{sub 3} O{sub 7-x}

Energy Technology Data Exchange (ETDEWEB)

Lima, G A.R. [UNESP, Guaratingueta, SP (Brazil). Faculdade de Engenharia. Dept. de Fisica e Quimica

1991-12-31

We investigate the electronic structure of superconductor Y Ba{sub 2} Cu{sub 3} O{sub 7-x} through a molecular cluster approach. The calculations are performed self consistently through a semi empirical L.C.A.O. technique, where different charge states are considered. The correlation effects are taken into account by configuration interaction procedure (INDO/CI). The results for the larger cluster yield a density of states showing a strong p-d covalency resulting in a width of around 8,0 eV for the valence band. The optical excitations is analyzed in detail and compared with the experimental data. (author) 18 refs., 2 figs., 1 tab.

Scaffold of chitosan-sodium alginate and hydroxyapatite with application potential for bone regeneration; Scaffold de quitosana-alginato de sodio e hidroxiapatita com potencial de aplicacao para regeneracao ossea

Energy Technology Data Exchange (ETDEWEB)

Rebelo, Marcia de A.; Alves, Thais F.R.; Lopes, Francielly C.C.N; Oliveira Junior, Jose Martins de; Pontes, Katiusca S.; Fogaca, Bruna A.C.; Chaud, Marco V., E-mail: marco.chaud@prof.uniso.br [Universidade de Sorocaba (LABNUS/UNISO), Sorocaba, SP (Brazil). Laboratorio de Biomateriais e Nanotecnologia

2015-07-01

Scaffold for organic tissue regeneration are architectural, three-dimensional, porous, biocompatible and biodegradable devices. The first challenges to be met in the development of these devices to mimic the biomechanical properties of the target tissue. The aim of this study was to develop and to characterize scaffolds composed of chitosan (Ch), sodium alginate (SA), hydroxyapatite (HA). The scaffolds were obtained by lyophilization. HA has been incorporated into the polymer dispersion in Ch-AS concentration of 20 and 60%. The mechanical properties of the scaffold were determined by tensile and compression tests. Swelling capacity was assessed in the presence of simulated saliva, purified water, HCl 0.01M, NaOH 0.01M. The calcium content was quantified using fluorescence X-rays. Analysis of the results indicates that the Qt-AS-HA-60% scaffold obtained by lyophilization meets promising properties for bone tissue regeneration. (author)

Shelf-life increase of fresh mushrooms Pleurotus sajor-caju using gamma radiation;Aumento da vida util de cogumelos Pleurotus sajor-caju in natura com aplicacao de radiacao gama

Energy Technology Data Exchange (ETDEWEB)

Moda, Evelise Moncaio

2008-07-01

The production and consumption of edible mushrooms has been increasing in the last years due to its nutritional composition and sensory quality. The irradiation of mushrooms has been used with the purpose of maintaining the fresh product characteristics during shelf-life. The present study evaluated the effect of different radiation doses on the conservation of mushrooms Pleurotus sajor-caju, through by chemical, physical, microbiological and sensorial parameters. The packaging consisted on polystyrene trays with 250 g of sample, wrapped in polyvinyl chloride (PVC). The mushrooms were irradiated with doses of 125, 250, 500 and 750 Gy in a Gamma cell 220 type irradiator, and stored at 4 +- 1 deg C and 90% UR for 10 days. The proximate composition (moisture, crude fibre, total protein, total fat and ash), total soluble solids, pH, texture, color (L, a, b, Chroma and ho), enzymatic activity (polyphenoloxidase and peroxidase), microbiological (total coliform, Escherichia coli and total psychotropic bacteria) and sensory evaluation (color, taste and appearance) were determined in the 1st, 5th and 10th storage days. For the respiratory rate analysis, 30 g of sample were placed in jars and stored at 4 +- 1 deg C and 90% UR for 8 days. CO{sub 2} was analyzed every day using a gaseous chromatograph. The results were submitted to variance analysis and average test using the SAS statistical package. The total protein and total fat values did not differ significantly between treatments or storage periods, while the moisture, crude fibre and ash values differ between treatments and periods. The dose of 750 Gy darkness the mushroom in the last evaluation, and texture was better in control during the storage period. The color (L, a), texture and proximate composition values did not differ significantly between treatments or storage periods. A significant increase was observed for soluble solids, b{sup *} and enzymatic activity values in all treatments at the end of the storage period. Values of polyphenoloxidase and peroxidase activities increased in the last day of evaluation in samples irradiated with 250 Gy. This fact may be a result of the water radiolysis process, since mushrooms have high water content. The dose of 125 Gy increased the respiratory rate of the samples until the 5th storage day in comparison to the other treatments, causing reduction in the product shelf-life. The samples irradiated with 250, 500 and 750 Gy had a reduction on the respiratory rate if compared with the control, so contributing to the maintenance of the post harvest quality during the storage. The samples which received 750 Gy obtained the best results in the microbiological analyses, with reduction of total coliform and psychotropic bacteria during the storage period. Sensory analyses showed that the control had higher scores for color, aroma and appearance attributes; they were above the acceptability limit until the last storage day. In general, the irradiated samples were accepted for the evaluated attributes until the 5th storage day; thus, establishing the shelf-life for irradiated mushrooms (author)

Modeling of development and projection of the accumulated recoverable oil volume: methodology and application; Modelagem da evolucao e projecao de volume de oleo recuperavel acumulado: metodologia e aplicacao

Energy Technology Data Exchange (ETDEWEB)

Melo, Luciana Cavalcanti de; Ferreira Filho, Virgilio Jose Martins; Rocha, Vinicius Brito [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE)

2004-07-01

A relevant problem that petroleum companies deal is the estimate of the future levels of reserves The objective of the reserve forecasting is pursued through the construction of mathematical models. Considering that the exploration process is an informed and controlled process, in order to reach the exploration targets, the exploration process is lead inside of a sequence of decisions based on the reached results. Such decisions are taken surrounded by an uncertain environment added to the random nature of the process. Another important assumption that must be taken into consideration is the dependency of the exploration on the conditions, or structure, of the discovered resources and the final potential. The modeling starts with the establishment of a general problem, when the models are being constructed, based on suppositions associated to the main concepts, and ends with the attainment of specific solutions, when the best description, or model, is selected through the estimate of the respective parameters and of the measurement adjustments. The result of this approach reflects the essence of the exploration process and how it is reflected in the incorporation of reserves and history of field discoveries. A case study is used for validation of the models and the estimates. (author)

In vitro study of temperature changes in root during Er:YAG laser application; Estudo in vitro da alteracao da temperatura durante a aplicacao do Er:YAG laser intracanal

Energy Technology Data Exchange (ETDEWEB)

Brandao, Redson Vilela

2001-07-01

The temperature increase in root dentine irradiated by Er:YAG laser beam was analyzed, for different dentine thickness and different energy and frequency conditions, aiming the evaluation of Er:YAG laser in endodontic therapy, without causing any damages to close tissues. Twenty four human teeth were separated in four groups with six teeth each, and longitudinally sectioned in thickness of 0.5 mm (first group), 1,0 mm (second group), 1,5 mm (third group) and 2,0 mm (fourth group). Those samples were irradiated with the Er:YAG laser, emitting at the wavelength of 2.94{mu}m, by using a sapphire optic fiber with diameter of 0.375 mm, and forming an angle of 5 deg with the irradiated dentine surface. Three different laser energies were used in this study, 180 mJ, 160 mJ and 140 mJ, with frequencies of 10 Hz and 15 Hz. The temperature data were collected in a digital-analog system and sent to a computer for analysis. It was verified that the time for temperature increases of 5 deg in the external root walls varies according to the laser energy, repetition rate and dentine root thickness. Thus, in this work we could obtain laser parameters to avoid thermal damages in periodontal tissues. (author)

Application of electron beam radiation for peat sterilization and suppression of microbe contaminants; Aplicacao da radiacao por feixe de eletrons como agente esterilizante de microorganismos em substrato turfoso

Energy Technology Data Exchange (ETDEWEB)

Tsai, David

2006-07-01

Inoculation of root nodule bacteria into legume seeds such as soybean [Glycine max. (L.)], common bean (Phaseolus vulgaris L.) and forage pasture has been effective and convenient as this simple procedure may introduce effective strains of Bradyrhizobium/Rhizobium into agricultural soils without a past history of successful cropping systems with the legume hosts. Peat-based substrates previously sterilized have been used for decades as bacteria carrier, protecting them from the prevailing harsh conditions in tropical soils and ensuring their survival with nutrient and protection against the soil antagonists. The Brazilian Government requires that all peat-based substrates must be gamma-sterilized from a cobalt-60 ({sup 60}Co) source, prior the introduction of the root nodule bacteria into the package. The recommendation is for a dose up to 50 kGy for an effective suppression of pathogens and saprophytes, in order to avoid competition among the substrate microbiota. Recently, the use of the electron beam (EB) accelerator has shown to be a new alternative for peat pre-sterilization, as this technique may promote reactive free-radicals which are efficient to suppress microbial contaminants. This fast technology is considered more environment and ecology friendly-sound than gamma radiation ({gamma}). The disadvantage of not reaching higher depth than gamma rays from {sup 60}Co must be considered, and attempts of optimizing the technique are crucial. This study compared both methods by using increasing rates of radiation by {sup 60}Co by the EB method - O, 10, 20, 30, 40 e 50 kGy in a commercial peat used for inoculants. Experimental data from days 7, 14, 21 and 28 days (growth period) and 150, 180 and 210 days (storage period) indicated high numbers of the strain Rhizobium tropici CM-01, labelled with gusA{sup +} (Study 1) and celB{sup +} (Study 2) from both eat-sterilizing techniques, reaching values above the minimum of 1x10{sup 8} cells g{sup -1} peat. At high rates, above 40 kGy, and after long incubation periods (ex. after 150 days), EB method was more efficient to suppress actinobacteria, one serious antagonist for rhizobia. Strain CM-01 celB{sup +}, data for the period of bacterial growth confirmed the efficiency of the method even at rates as low as 10 kGy. (author)

Influence of the sintering temperature on the structural and electronic properties of LaCrO{sub 3} doped with barium; Influencia da temperatura de sinterizacao nas propriedades estruturais e eletronicas de LaCrO{sub 3} dopadas com bario

Energy Technology Data Exchange (ETDEWEB)

Silva, A.L.A. da; Souza, M.V.M.M., E-mail: adneybr@yahoo.com.b [Universidade Federal do Rio de Janeiro (LabTecH/EQ/UFRJ), RJ (Brazil). Escola de Quimica. Lab. de Tecnologias do Hidrogenio; Rocco, A.M. [Universidade Federal do Rio de Janeiro (GMCE/EQ/UFRJ), RJ (Brazil). Escola de Quimica. Grupo de Materiais Condutores e Energia

2010-07-01

Ba-doped lanthanum chromites were synthesized by combustion method, utilizing urea and glycine as fuel agents. The powders were calcined (800 deg C/6 h), pelletized, sintered in various temperatures and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), density/porosity and electrical conductivity. The diffractograms of the sintered samples presented a well-defined structure, with presence of secondary phases which increase with the sintering temperature. The samples presented low densities and a high porosities (40 - 50%), which was also observed in SEM analysis. The urea-synthesized sample presented a higher conductivity (10.4 S/cm at 1000 deg C), which is related to the influence of the fuel agent in the material properties. (author)

Scanning electron microscopy evaluation of the interaction pattern between dentin and resin after cavity preparation using Er:YAG laser; Avaliacao, atraves de microscopia eletronica de varredura, do padrao de interacao dentina-resina em cavidades preparadas com laser de Er:YAG

Energy Technology Data Exchange (ETDEWEB)

Schein, Marcelo Thome

2001-07-01

The aim of this study was to describe the interaction pattern formed between dentin and resin on cavities prepared with an erbium laser (Er:YAG). The morphological aspect of the irradiated dentin after acid etching was also observed. Ten dentin disks were obtained from fresh extracted third molars. Each disk received two cavities, one prepared with a conventional high-speed drill, while the other cavity was obtained by the use of an Er:YAG laser (KaVo KEY Laser, KaVo Co.). The laser treatment was performed with 250 mJ/pulse, 4 Hz, non contact mode, focused beam, and a fine water mist was used. Five disks were prepared for morphological analysis of the acid etched dentin. The other five disks had their cavities restored with Single Bond (3M) followed by Z100 resin (3M). The specimens were observed under scanning electron microscopy after dentin-resin interface demineralization and deproteinization. It was observed that the morphological characteristics of the acid-etched irradiated dentin were not favorable to the diffusion of monomers through the collagen network. The dentin resin interfacial aspect of irradiated dentin, after acid etching, showed thin tags and scarce hybridization zones, which agreed with the morphology of the irradiated and acid-etched dentin substrate observed. (author)

Chemical modification of high molecular weight polyethylene through gamma radiation for biomaterials applications; Modificacao quimica de polietileno de alto peso molecular atraves de radiacao gama para aplicacao em biomateriais

Energy Technology Data Exchange (ETDEWEB)

Raposo, Matheus P.; Rocha, Marisa C.G., E-mail: matheusmerlim@hotmail.com [Universidade Estado do Rio de Janeiro (UERJ), Nova Friburgo, RJ (Brazil). Instituto Politecnico

2015-07-01

Ultra high molecular weight polyethylene has been used in the medical field due to its high mechanical properties compared to the other polymers. Its main application is in the development of orthopedic implants, which requires high resistance to abrasion. One of the most used methods is the introduction of crosslinks in the polymer through gamma irradiation. In order to prevent oxidation reactions, studies have been developed using tacoferol (vitamin E) as an antioxidant for the material. The ascorbic acid (vitamin C), however, has been appointed as a viable alternative for vitamin E. In this work, a high molecular weight polyethylene grade (HMWPE) and polyethylene samples formulated with vitamin C were submitted to gamma radiation. Thermodynamic-mechanical methods and gel content determinations were used to characterize the samples obtained. The sample containing 1% of vitamin C and irradiated with 50 KGy of gamma radiation presented the highest content of crosslinks. (author)

Fabrication and electrical characterization of polyaniline-silicon heterojunction for gamma radiation dosimetry application; Fabricacao e caracterizacao eletrica de heterojuncoes de polianilina - silicio para aplicacao em dosimetria de radiacao gama

Energy Technology Data Exchange (ETDEWEB)

Laranjeira, Jane Maria Goncalves

2004-08-15

In this work a technique has been developed to fabricate high quality polyaniline-silicon heterojunction diodes for use as gas and/or ionizing radiation sensors. Polyaniline thin films (40 nm thick) produced by spin-coating on silicon substrates, were the active part of the junction structure. The devices presented excellent reproducibility of their electrical characteristics with high rectification ratio, 60,000 at {+-}1.0 V, and typical reverse current at - 1.0 V of 3 nA at 295 K. A G/I x G plot has been used to analyze the current-voltage characteristics, yielding typical series resistance of 4 k{omega} {+-} 5% and ideality factor in a range of 1,9 {+-} 0.5%. The heterojunction diode presents high sensitivity to gamma radiation in the dose range of 3 x 10{sup -2} to 7 kGy with a linear response in the forward and reverse bias. The excellent electrical characteristics together with the linear response with the dose, strongly suggest the application of this device for spectrometry or dosimetry of high doses of gamma radiation. These devices presented high sensitivity to gas moistures such as ammonia, nitric acid and trichloroethylene. In both cases the sensitivity was observed through shifts of the current-voltage curves, which can be easily monitored to provide a calibration curve of the sensor either as a radiation dosimeter or as a gas sensor for use in applications for gas monitoring or radiation dosimetry. Several aspects of the reliability physics of silicon-polyaniline heterojunction, such as degradation effects induced by local heating, charge trapping and temperature changes, have been discussed. These results further confirm the quality of the devices electrical characteristics and their suitability for radiation and gas sensors applications. Another interesting results presented in this work was the use of polyemeraldine nanofilms (thickness in the range 30-50 nm) deposited by 'spin coating' on glass substrates as an optical dosimeter for gamma radiation based on the color change of the polymer. The nanofilms devices were characterized by UV visible absorption spectroscopy. The deep blue color, characteristic of undoped polyaniline films before irradiation, becomes subsequently green as the film is being irradiated, and the film absorption coefficient exhibits a linear dependence with the logarithm of the irradiation dose from I to 10 kGy. (author)

Fabrication and electrical characterization of polyaniline-silicon heterojunction for gamma radiation dosimetry application; Fabricacao e caracterizacao eletrica de heterojuncoes de polianilina - silicio para aplicacao em dosimetria de radiacao gama

Energy Technology Data Exchange (ETDEWEB)

Laranjeira, Jane Maria Goncalves

2004-08-15

In this work a technique has been developed to fabricate high quality polyaniline-silicon heterojunction diodes for use as gas and/or ionizing radiation sensors. Polyaniline thin films (40 nm thick) produced by spin-coating on silicon substrates, were the active part of the junction structure. The devices presented excellent reproducibility of their electrical characteristics with high rectification ratio, 60,000 at {+-}1.0 V, and typical reverse current at - 1.0 V of 3 nA at 295 K. A G/I x G plot has been used to analyze the current-voltage characteristics, yielding typical series resistance of 4 k{omega} {+-} 5% and ideality factor in a range of 1,9 {+-} 0.5%. The heterojunction diode presents high sensitivity to gamma radiation in the dose range of 3 x 10{sup -2} to 7 kGy with a linear response in the forward and reverse bias. The excellent electrical characteristics together with the linear response with the dose, strongly suggest the application of this device for spectrometry or dosimetry of high doses of gamma radiation. These devices presented high sensitivity to gas moistures such as ammonia, nitric acid and trichloroethylene. In both cases the sensitivity was observed through shifts of the current-voltage curves, which can be easily monitored to provide a calibration curve of the sensor either as a radiation dosimeter or as a gas sensor for use in applications for gas monitoring or radiation dosimetry. Several aspects of the reliability physics of silicon-polyaniline heterojunction, such as degradation effects induced by local heating, charge trapping and temperature changes, have been discussed. These results further confirm the quality of the devices electrical characteristics and their suitability for radiation and gas sensors applications. Another interesting results presented in this work was the use of polyemeraldine nanofilms (thickness in the range 30-50 nm) deposited by 'spin coating' on glass substrates as an optical dosimeter for gamma radiation based on the color change of the polymer. The nanofilms devices were characterized by UV visible absorption spectroscopy. The deep blue color, characteristic of undoped polyaniline films before irradiation, becomes subsequently green as the film is being irradiated, and the film absorption coefficient exhibits a linear dependence with the logarithm of the irradiation dose from I to 10 kGy. (author)

Evaluation of performance of AISI 444 steel for application in distillation towers; Avaliacao do desempenho do aco AISI 444 para aplicacao como 'lining' em torres de destilacao

Energy Technology Data Exchange (ETDEWEB)

Guimaraes, R.F.; Miranda, H.C. de; Farias, J.P. [Universidade Federal do Ceara (DEMM/UFC), Fortaleza, CE (Brazil). Dept. de Engenharia Metalurgica e de Materiais. Lab. de Caracterizacao de Materiais], e-mail: rf.guimaraes@yahoo.com.br

2008-07-01

In this work, the behavior of the AISI 444 ferritic stainless steel submitted to thermal fatigue test and their corrosion resistance in heavy crude oil was evaluated. The AWS E309MoL-16 and E316L-17 weld metal was employed as filler metal. Plates of the AISI 444 were welded on ASTM A-516 Gr. 60 plates and submitted to fatigue thermal cycle. Samples were extracted from plates welded and heat treated immersed in heavy crude oil at 300 deg C. Optical microscopy (OM), scanning electron microscopy (SEM) and energy dispersive of X-ray analysis (EDX) were used to characterize the microstructure and the corroded surface. The results show that the AISI 444 stainless steels did not present cracks after the thermal fatigue cycle and the heat treated immerse in heavy crude oil. The electrode AWS E309MoL-16 show better corrosion resistance than the AWS E316L-17. (author)

Chemometrics application in fuel's MTR type chemical characterization by X-ray fluorescence; Aplicacao da quimiometria para caracterizacao quimica de combustiveis tipo MTR por fluorescencia de raios-X

Energy Technology Data Exchange (ETDEWEB)

Silva, Clayton Pereira da

2012-07-01

In Brazil and worldwide the nuclear power has occupied a prominent position with many applications in industry, power generation, environment and medicine, improving the quality of tests and treatments, therefore people's lives. Uranium is the main element used in nuclear facilities and it s employed as base material to generation of electricity in the manufacture of radiopharmaceuticals. In the '50s, during the Cold War, the then newly created International Atomic Energy Agency proposed to oversee nuclear facilities and encourage the manufacture of nuclear fuels with low-enriched uranium (LEU) fuel came then type Material Test Reactor (MTR), manufactured initially in U{sub 3}O{sub 8} and U{sub 3}Si{sub 2} later, both dispersed in aluminum. The use of this technology requires a constant improvement of all processes involving the manufacture of MTR subject to several international protocols, which seek to ensure the reliability of the fuel from the standpoint of practical and environmental. In this context, the control of impurities, from the point of view of neutron economy, directly affects the quality of any nuclear fuel, so strict control is necessary. The literature has reported procedures which, beyond generating residues, are lengthy and costly, they need calibration curve and consequently reference materials. The aim of this work is to establish and validate a methodology for nondestructive quantitative chemical analysis, low cost and analysis time, as well as minimize the generation of waste, for multielement determination of major constituents (Utotal and Si) and impurities (B, Mg, Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd and others) present in U3O8 and U{sub 3}Si{sub 2}, meeting the needs of nuclear reactors in the nuclear fuel qualification type MTR. For that purposes, will be applied the X-ray fluorescence technique which allows fast chemical and nondestructive analysis, aside from sample preparation procedures that do not require previous chemical treatments (dissolving, digesting, and others). To corrections like effects of spectral and matrix were applied and evaluated the fundamental parameter method, univariate calibration curve and multivariate calibration. The results were compared by means of statistical tests in accordance with ISO 17025 in MRCs (123 (1-7) and 124 (1-7)) MCRs of U{sub 3}O{sub 8} from New Brunswick Laboratory (NBL) and 16 U{sub 3}Si{sub 2} samples provided by CC of IPEN/CNEN-SP. The chemometrics is a promising method to determination of minor and major constituents on the U3Si2 and U3O8 basis nuclear fuel, because the precision and accuracy are statistically equal volumetric analysis, gravimetric and ICPOES methods. (author)

Application of perturbation methods for sensitivity analysis for nuclear power plant steam generators; Aplicacao da teoria de perturbacao a analise de sensibilidade em geradores de vapor de usinas nucleares

Energy Technology Data Exchange (ETDEWEB)

Gurjao, Emir Candeia

1996-02-01

The differential and GPT (Generalized Perturbation Theory) formalisms of the Perturbation Theory were applied in this work to a simplified U-tubes steam generator model to perform sensitivity analysis. The adjoint and importance equations, with the corresponding expressions for the sensitivity coefficients, were derived for this steam generator model. The system was numerically was numerically solved in a Fortran program, called GEVADJ, in order to calculate the sensitivity coefficients. A transient loss of forced primary coolant in the nuclear power plant Angra-1 was used as example case. The average and final values of functionals: secondary pressure and enthalpy were studied in relation to changes in the secondary feedwater flow, enthalpy and total volume in secondary circuit. Absolute variations in the above functionals were calculated using the perturbative methods, considering the variations in the feedwater flow and total secondary volume. Comparison with the same variations obtained via direct model showed in general good agreement, demonstrating the potentiality of perturbative methods for sensitivity analysis of nuclear systems. (author) 22 refs., 7 figs., 8 tabs.

Application of low doses of ionizing radiation in the Brazilian fruit tucuma (Astrocaryum vulgare Mart.); Aplicacao de baixas doses de radiacao ionizante no fruto brasileiro tucuma (Astrocaryum vulgare Mart.)

Energy Technology Data Exchange (ETDEWEB)

Lima, Antonio Luis dos Santos; Lima, Keila dos Santos Cople; Araujo, Leandro Moreira, E-mail: santoslima@ime.eb.b, E-mail: keila@ime.eb.b [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil); Gody, Ronoel Luiz de Oliveira; Pacheco, Sidney, E-mail: ronoel@ctaa.embrapa.b, E-mail: sidney@ctaa.embrapa.b [EMBRAPA Agroindustria de Alimentos (CTAA), Rio de Janeiro, RJ (Brazil)

2011-07-01

The tucuma (Astrocaryum vulgare Mart.) is a native fruit of Amazonia, occurring mainly in the state of Para, but also found in the Brazilian northeast states and in the Brazilian central-western states. The tucuma is considered an excellent source of carotenoids with a very high concentration of {beta}-carotene, which is a precursor of vitamin A. In addition to carotenoids it is an important source of vitamin B2 (riboflavin) in fruits. This study aimed to analyze the effects of gamma radiation on the nutritional value of tucuma. The fruits were irradiated at doses of 0.5, 1.0 and 2.0 kGy irradiator with a source of cesium 137. The carotenoids were determined by spectrophotometry. The analysis of {alpha} and {beta}-carotene, thiamine, riboflavin were carried out by high performance liquid chromatography (HPLC). The {beta}-carotene accounts for 80% of total carotenoids in tucuma, and with a dose of 2 kGy, it showed the highest reduction of {beta}-carotene, about 7.5% in relation to the control. The tucuma fruit showed high levels of riboflavin from 0.183 to 0.222 {mu}g 100 g{sup -1}, and maintained stability after the gamma radiation process. However, it had low levels of thiamine from 0.050 to 0.033 {mu}g 100 g{sup -1}, and irradiated at a dose of 2 kGy showed significant reductions of thiamine, about 34% in relation to the control. (author)

Chemical modification of HTPB for application as polymeric additives for diesel fuel. 1 - phenyl ethers; Modificacao quimicado PBLH para aplicacao como aditivos polimericos para oleo diesel. 1. eteres fenilicos

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Agne R.; Prezibella, Alysson M.; Ferraz, Fernando A.; Soldi, Rafael A.; Oliveira, Angelo R.S.; Cesar-Oliveira, Maria Aparecida F. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Quimica. Lab. de Polimeros Sinteticos

2007-07-01

The petroleum industry faces several problems related to the crystallization of paraffins, in petroleum and its derivatives, with the reduction of the service temperature. To solve this problem polymeric additives are used, of which the esters have been enough studied in several areas of the world, except in Brazil. In this work, this class of pour point depressant additives it was obtained through the chemical modification of Hydroxyl Terminate Polybutadiene (HTPB) that present a hydrocarbon chemical structure containing one double bound in each repetitive unit and hydroxyl groups of the primary and secondary allylic types - functional groups potentially reactive. The obtained products were characterized by Fourier transformed infrared spectroscopy and nuclear magnetic resonance, and they are being tested as additive for the pour point reduction of a diesel oil samples (REPAR-PETROBRAS). (author)

Application of relative permeability modifier additives to reduce water production in different formations; Aplicacao de aditivos modificadores de permeabilidade relativa para reducao da producao de agua em diferentes formacoes

Energy Technology Data Exchange (ETDEWEB)

Melo, Ricardo C.B.; Torres, Ricardo S.; Pedrosa Junior, Helio; Dean, Gregory [BJ Services do Brasil Ltda., RJ (Brazil)

2004-07-01

Today most oil companies would be better described as water companies. Total worldwide oil production averages some 75 million barrels per day and, while estimates vary, this is associated with the production of 300 - 400 million barrels of water per day. These values of approximately 5 - 6 barrels of water for every barrel of oil are quite conservative. In the United States, where many fields are depleted, the ratio of water-to-oil production is closer to 9 to 1. In some areas around the world, fields remain on production when the ratio is as high as 48 to 1. Numerous strategies, both mechanical and chemical, have been employed over the years in attempts to achieve reduction in water production. Simple shut-off techniques, using cement, mechanical plugs and cross-linked gels have been widely used. Exotic materials such as DPR (disproportionate permeability reducers) and or new generation of relative permeability modifiers (RPM) have been applied in radial treatments with varying degrees of success. Most recently 'Conformance Fracturing' operations have increased substantially in mature fields as the synergistic effect obtained by adding a RPM to a fracturing fluid have produced increased oil production with reduced water cut in one step, consequently eliminating the cost of additional water shut off treatment later on. This paper presents laboratory testing and worldwide case histories of applications of various RPM materials, at different permeability and temperatures. The paper also describes technical design and operational methodology that we believe to have a significant impact in the development strategies of many fields worldwide. (author)

Polymers and composites synthesis and characterization for application on PEM type fuel cells; Sintese e caracterizacao de polimeros e compositos para aplicacao em celulas a combustivel do tipo PEM

Energy Technology Data Exchange (ETDEWEB)

Fiuza, Raigenis da Paz; Souza, Daniele Ribeiro; Barreto, Ednardo Gomes; Boaventura Filho, Jaime Soares; Jose, Nadia Mamede [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil)]. E-mail: raigenis@gmail.com

2006-07-01

The PEM (proton exchanging membrane) type fuel cell presents good potential for the energy production without the residue generation. However, its manufacture presents high costs for commercial application, mainly due to the electrolyte. Sulfonated Peek (polish-ether-ether-ketone) supported or auto immobilized the in a silicone matrix is an interesting alternative as electrolyte for PEM fuel cells. The commercial PEEK in powder form was functionalized with sulfuric acid, giving the SPEEK (Sulfonated PEEK). The membranes were produced by hot pressing the SPEEK immobilized in a silicone matrix produced by the sol-gel process. The membranes obtained were characterized by DRX, FTIR, TGA, MEV, DSC and protonic conductivity measurements. (author)

The application of artificial intelligence on the optimal solution of the operating conditions of continuous casting; Aplicacao da inteligencia artificial na solucao otima das condicoes operacionais do lingotamento continuo

Energy Technology Data Exchange (ETDEWEB)

Spim Junior, J.A.; Ierardi, M.C.F.; Garcia, A. [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica

1995-12-31

This work presents the development of a software that incorporates artificial intelligence techniques, directly applied to the metallurgical industry, particularly to those using the continuous casting process for ingot production. The essential parts of the continuous casting equipment which must be subjected to monitoring are presented, and a methodology of physical settlements in each cooling region as well. The modification performed by the intelligent program taking into account the critical rules conducting to an efficient solidification, are compared with real time simulation of ingot surface temperatures. The efficiency of the intelligent system is assured by final product quality parameters. This approach is applied to the real dimension of a slab continuous caster under real operation conditions, demonstrating that very good results can be attained by using an heuristic search 11 refs., 4 figs., 4 tabs.

Application of experimental design on the uncertainty analysis and history matching integration process; Aplicacao de planejamento estatistico no processo de integracao de analise de incertezas com ajuste de historicos

Energy Technology Data Exchange (ETDEWEB)

Maschio, Celio; Risso, Fernanda V.A.; Schiozer, Denis J. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

2008-07-01

The purpose of this work is to present a methodology of uncertainty mitigation through observed data obtained during petroleum field production. One step of the methodology consists of the uncertainty quantification through the derivative tree technique. Another step is the probability redistribution of the uncertain levels. The uncertainty quantification process through derivative tree can be unfeasible for cases with high number of attributes. In this context, for the uncertainty quantification, it is proposed the use of proxies, which are response surfaces obtained through statistical design, in order to reduce the number of simulations. Additionally, the weights of each attribute level considered in the probability redistribution are optimized. The methodology was applied in two reservoirs: a synthetic field with eight attributes and a modified real field with six critical attributes. The results have shown a good agreement among the uncertainty curves obtained through the response surface and those obtained through the simulations and significant reduction of the number of simulations by using proxies. The effect of the uncertainty reduction on the production prediction is also analyzed. (author)

Purification and preparation of bismuth(III) iodide for application as radiation semiconductor detector; Purificacao e preparacao do cristal semicondutor de iodeto de bismuto para aplicacao como detector de radiacao

Energy Technology Data Exchange (ETDEWEB)

Ferraz, Caue de Mello

2016-11-01

This study describes the experimental procedure of a BiI{sub 3} purification method powder, aiming a future application of these semiconductor crystals as room temperature radiation detector. The Repeated Vertical Bridgman Technique was applied for the purification, based on the melting and nucleation phenomena. An ampoule filled with a maximum of 25% by volume of BiI{sub 3} powder was mounted into the Bridgman furnace and vertically moved at a speed of 2 millimeters per hour, inside the furnace with programmed thermal gradient and temperature profile, at a temperature maximum of 530 deg C. The reduction of the impurities in the BiI{sub 3}, each purification, was analysed by Instrumental Neutron Activation Analysis (INAA), in order to evaluate the efficiency of the purification technique established in this work, for trace metal impurities. It was demonstrated that the Repeated Bridgman is effective to reduce the concentration of many impurities in BiI{sub 3}, such as Ag, As, Br, Cr, K, Mo, Na and Sb. The crystalline structure of the BiI{sub 3} crystal purified twice and third times was similar to the BiI{sub 3} pattern. However, for BiI{sub 3} powder and purified once an intensity contribution of the BiOI was observed in the diffractograms. It is known that semiconductor detectors fabricated from high purity crystal exhibit significant improvement in their performance compared to those produced from low purity crystals. (author)

Application of portable nuclear gauge to the control of soil, asphalt and concrete compaction; A aplicacao dos medidores nucleares portateis no controle de compactacao de solos, asfalto e concreto

Energy Technology Data Exchange (ETDEWEB)

Castro, Bruno Almeida Cunha de [PATTROL, Pavimentos, Tracados e Obras Ltda. (Brazil)

1999-07-01

This paper presents an overview on the density and humidity determination methodology by using nuclear techniques, describing the different process phases and demonstrating their advantages compared to the traditional methods.

Study for prevention of sucker rods failures though NiCr coating; Estudo para prevencao de falhas de hastes de bombeio de petroleo atraves de aplicacao de revestimento NiCr

Energy Technology Data Exchange (ETDEWEB)

Bezerra, Brunno S.L. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Araujo, Paulo M.M. [Universidade Federal de Sergipe (UFS), Aracaju, SE (Brazil); Figueiredo, Renan T.; Cavalcanti, Eliane B. [Universidade Tiradentes, Aracaju, SE (Brazil)

2008-07-01

The use of common materials, as carbon steel, in sucker rods motivated by its low cost, in mature oil wells located on Sergipe, Alagoas, Bahia and Rio Grande do Norte states, which are subjected to tractive-compressive-abrasive like combined loads, added to aggressive environment (oil production in the presence of water, carbon dioxide, hydrogen sulfide, salinity, etc..), leads to the materials drastic degeneration and even its rupture. The substitution of common materials by those which have better resistance o failure is, therefore, limited by high cost. A much cheaper alternative is to modify the surface of common materials used in the subsurface equipment, by applying a protective coating in order to assure the system's performance, durability or better economic viability. In the present work it was studied the use of thermal sprayed NiCr coating in sucker rods. It was studied three thermal spray processes: flame spray, arc spray and HVOF (high velocity oxy fuel). (author)

NASVD and MNF techniques and your application noise reduction in gamma-ray spectrometric data; As tecnicas NASVD e MNF e sua aplicacao na reducao de ruidos em dados gamaespectrometricos

Energy Technology Data Exchange (ETDEWEB)

Cavallaro, Francisco de Assis, E-mail: assisfc@yahoo.com.br, E-mail: assis@agp-la.org [Departamento de Geologia Sedimentar e Ambiental, DGSA, Instituto de Geociencias, IG, Universidade de Sao Paulo, SP (Brazil); AGPLA, AeroGeoPhysica Latinoamerica, Sao Paulo, SP (Brazil); Portugal, Rodrigo S.; Bizuti, Ariathemis M., E-mail: portugal@ige.unicamp.br, E-mail: ambizuti@ige.unicamp.br [Departamento de Geologia e Recursos Naturais, DGRN, Instituto de Geociencias, IG, Universidade Estadual de Campinas, SP (Brazil); Silva, Adalene M., E-mail: adalene@unb.br [Universidade de Brasilia (UnB), DF (Brazil). Inst. de Geociencias. Dept. de Geoquimica e Recursos Minerais (GRM)

2009-04-15

The radioactive decay is a random process, and the measurement precision is ruled by statistical laws. The counting ratios of the profiles are always noisy when analyzed for short periods, such as one second per measurement. Corrections made at the end of conventional processing in the airborne gamma-ray spectrometric method data are not enough to remove and minimize, or even reduce considerably, the spectrum's originated noise. Two statistic methods that act locally in collected data, in the spectrum domain, have been suggested by literature to remove such remaining noises, the Noise-Adjusted Singular Value Decomposition - NASVD and Maximum Noise Fraction - MNF. These methods produce a significantly noise reduction. In this work both methods were applied in an area comprehended by two blocks, I and II, of the airborne survey that covers the west area of Mineral Province of Tapajos between Para and Amazon states. The filtered and non-filtered data with the NASVD and MNF techniques were processed with the Lasa's parameters. The comparison of results between maps and profiles shows that both methods are valuable, since there was resolution gain in these products. (author)

Application of data representation by fuzzy conditional propositions in the modeling of measurement uncertainty; Aplicacao da representacao de dados por proposicoes condicionais difusas na modelagem da incerteza de medicao

Energy Technology Data Exchange (ETDEWEB)

Magalhaes, A.N. de; Lambert-Torres, G.; Rissino, S.; Silva, M.F. da; Silva, L.E. Borges da; Carvalho, L.M.R. de

2009-07-01

It is not an easy task to frame uncertainty measurement problems by means of differential equations quickly and satisfactorily. Therefore, it is necessary to adapt the method for data representation by conditional fuzzy propositions for modeling uncertainties measurement and their effect on the propagation. This method provides a parametric adjustment for fuzzy sets of assumptions, and the functions of consequence of each rule in the manner of a parable. The paper introduces concepts of sources of errors in measures, fundamentals of fuzzy logic, description of the algorithm method, application to error detection and representation of global uncertainty.

TRUSSPOLE - Trussed Metallic Pole. Results of its application in 69 kV TL - simple circuit; Trusspole: poste metalico trelicado. Resultados da aplicacao em LT 69kV - circuito simples

Energy Technology Data Exchange (ETDEWEB)

Silva, Paulo Ricardo Ralo Liberato da; Mello, Reynaldo Castriota de; Ferreira, Sirio Jose; Cadete, Marcia Augusta de Moura [MJMS - Mendes Junior Montagens e Servicos Ltda., Santa Luzia, MG (Brazil); Souza, Mauro Dias de [EGEL - Engenharia e Construcoes Ltda. (Brazil); Dantas, Roberto Pires [PLT - Projetos de Linhas de Transmissao Ltda. (Brazil)

1995-12-31

This report describes the origin, the development and the results of the TRUSSPOLE(Trussed Metallic Post) application in electric power transmission systems. It concerns a spatial trussed structure with a single metallic basis, similar to the concrete or wood pole, able to associate the technical and economical advantages of the trussed structures and the tubular or solid thick poles. The results obtained in the project, in load experiments of a study initial prototype and in the construction of a 69 kV Cs transmission line, with a 53.2 Km extension, using this type of structural solution, are shown 5 refs., 4 figs., 3 tabs.

Paradigm of planning under uncertainties - application to the planning of the electric energy distribution system; Paradigma de planejamento sob incertezas - aplicacao ao planejamento dos sistemas de distribuicao de energia eletrica

Energy Technology Data Exchange (ETDEWEB)

Bianchi Junior, Alberto; Reis, Lineu Belico dos

1996-07-01

In this work it is presented an original methodology of multistage planning, with conflictive objectives and restrictions, incorporating the concept of uncertainties. To do so, the proposed paradigm is based on the dynamic programming, which comprehends the multistage processes subjected to conflictive restrictions; on the Fuzzy Sets Theory, through the decisions and Fuzzy numbers, which model the uncertainties and ambiguous decisions relative to qualitative variables; and on the consideration of 'evolutional rules' associated to 'network flow' algorithm. In its conceptual elaboration, the paradigm is developed in a very ample way, of generalized application to a well defined class of planning problems. Particularly, the model fits in the ambit of the flexible planning, which has been very discussed in the recent literature. Flexible planning must be understood as the one which allows to the planner, under well-defined limits, the evaluation of the planning policy composed by 'strips' of actions (discrete or continuous), associated to uncertainty levels related to the 'real world'. In order to validate and consolidate the theoretic concepts, it was elaborated an algorithm turned to the aggregated planning of the distribution of electric power, that presents intrinsic characteristics which are perfectly fitted in the paradigm's applicability. Through comparisons effectuated with and pre-validated algorithm, evaluations related to the potentialities and to the coherence of the paradigm's applicability were made. (author)

Application of gamma radiation on disinfestation feed grain based food for domestic animals; Aplicacao da radiacao gama na desinfestacao de racoes a base de graos para alimentacao de animais domesticos

Energy Technology Data Exchange (ETDEWEB)

Ramos, Amanda Cristina Oliveira

2009-07-01

This study aimed to realize a survey to identify the associated insects to feed the city Sao Paulo / SP and also to assess the effect of gamma radiation on food ration for domestic animals infested by pests. Samples of 20 stores, 'Pet Shop' in different regions in Sao Paulo / SP were subjected to trials of 1 and 45 days for collection of insects with the aid of plastic tray and screens of different sizes. The species Sitophilus zeamais, Cryptolestes ferrugineus, Lasioderma serricorne and Oryzaephilus sp. showed a higher frequency. In assessing the effects of gamma radiation we used samples of maize, sunflower seeds and mix for rodents infested with adults of the species Sitophilus zeamais, Lasioderma serricorne and Plodia interpunctella, after the period of 7 to 10 days the insects were removed and samples subjected to increasing doses of gamma radiation. The species Sitophilus zeamais and Lasioderma serricorne subjected doses from 0,25 to 1,50 kGy and species Plodia interpunctella doses from 0,10 to 2,0 kGy. After 40 days of irradiation was evaluated the number of insects emerged. The results of bioassays with Sitophilus zeamais and with Lasioderma serricorne demonstrated that doses starting at 0,5 kGy was sufficient to cause mortality of eggs and newly emerged larvae. The results with Plodia interpunctella from the 1,5 kGy, hasn't emerged adult insects, concluding that these doses were sufficient to cause mortality of eggs and larvae. (author)

Strategic environmental assessment of Brazil's ethanol expansion: a methodological proposal and its preliminary application; Avaliacao ambiental estrategica da expansao de etanol no Brasil: uma proposta metodologica e sua aplicacao preliminar

Energy Technology Data Exchange (ETDEWEB)

Oberling, Daniel Fontana

2008-03-15

The main objective of this dissertation is to adapt the methodology of Strategic Environmental Assessment (SEA) to the case of ethanol fuel production in Brazil. The results are be utilized in decision-making processes as well as in the discussion on future tendencies of risks and opportunities regarding the development of ethanol as the principal renewable liquid fuel. Taking into account the international experiences of countries with a tradition in sectoral planning, SEA is found to be the instrument in public environmental management that can most adequately consider the environmental variable - beginning already at the planning stage of the ethanol industry, a necessity that has strongly unfolded itself following the deregulation of the sector in Brazil. The conflicts that may emerge from large ethanol production surpluses for export are also identified through the application of specifically designed indicators. (author)

Application of Laplace transform for determination of albedo type boundary conditions for neutronic calculations; Aplicacao da transformada de Laplace para determinacao de condicoes de contorno tipo albedo para calculos neutronicos

Energy Technology Data Exchange (ETDEWEB)

Petersen, Claudio Zen

2008-07-01

In this dissertation we use the Laplace transform to derive expressions for nonstandard albedo boundary conditions for one and two non-multiplying regions at the ends of one dimensional domains. In practice, the fuel regions of reactor cores are surrounded by reflector regions that reduce neutron leakage. In order to exclude the reflector regions from the calculations, we introduce a reflection coefficient or albedo. We use the present albedo boundary conditions to solve numerically slab-geometry monoenergetic and multigroup diffusion equations using the conventional finite difference method. Numerical results are generated for fixed source and eigenvalue diffusion problems in slab geometry(author)

Thermal activation and characterization of chocolate clay for using as adsorbent in nickel removal; Ativacao termica e caracterizacao da argila chocolate visando sua aplicacao como adsorvente na remocao de niquel

Energy Technology Data Exchange (ETDEWEB)

Villar, W.C.T.; Brito, A.L.F.; Laborde, H.M.; Rodrigues, M.G.F., E-mail: meiry@deq.ufcg.edu.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia Quimica; Ferreira, H.S. [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Programa de Ciencias e Engenharia de Materiais

2009-07-01

Clays present interesting properties as adsorbing material for the removal of heavy metals from effluents. This property is clearly modified by thermal activation. In this work, the characterization of chocolate clay before and after thermal activation (from 300 to 500 deg C) is realized by X-ray diffraction (XRD), differential thermal analysis and thermogravimetric analysis (DTA/TG), infrared spectroscopy (IR), scanning electron microscopy (SEM) and cation exchange capacity (CEC). The main differences between the activated and natural clays are structural modifications of the clay, as shown by XRD and DTA/TG, but also a modification of its cation exchange capacity as shown by the methylene blue method. (author)

Study of corrosion resistance of AISI 444 ferritic stainless steel for application as a biomaterial; Estudo da resistencia a corrosao do aco inoxidavel ferritico AISI 444 para aplicacao como biomaterial

Energy Technology Data Exchange (ETDEWEB)

Marques, Rogerio Albuquerque

2014-09-01

Ferritic stainless steels are ferromagnetic materials. This property does not allow their use in orthopedic prosthesis. Nevertheless, in some specific applications, this characteristic is very useful, such as, for fixing dental and facial prostheses by using magnetic attachments. In this study, the corrosion resistance and cytotoxicity of the AISI 444 ferritic stainless steel, with low nickel content, extra-low interstitial levels (C and N) and Ti and Nb stabilizers, were investigated for magnetic dental attachments application. The ISO 5832-1 (ASTM F-139) austenitic stainless steel and a commercial universal keeper for dental attachment (Neo-magnet System) were evaluated for comparison reasons. The first stainless steel is the most used metallic material for prostheses, and the second one, is a ferromagnetic keeper for dental prostheses (NeoM). In vitro cytotoxicity analysis was performed by the red neutral incorporation method. The results showed that the AISI 444 stainless steel is non cytotoxic. The corrosion resistance was studied by anodic polarization methods and electrochemical impedance spectroscopy (EIS), in a saline phosphate buffered solution (PBS) at 37 °C. The electronic properties of the passive film formed on AISI 444 SS were evaluated by the Mott-Schottky approach. All tested materials showed passivity in the PBS medium and the passive oxide film presented a duplex nature. The highest susceptibility to pitting corrosion was associated to the NeoM SS. This steel was also associated to the highest dopant concentration. The comparatively low levels of chromium (nearly 12.5%) and molybdenum (0.3%) of NeoM relatively to the other studied stainless steels are the probable cause of its lower corrosion resistance. The NeoM chemical composition does not match that of the SUS444 standards. The AISI 444 SS pitting resistance was equivalent to the ISO 5832-1 pointing out that it is a potential candidate for replacement of commercial ferromagnetic alloys used in dental prosthesis. (author)

Use of sterile insect technique in Brazil by the sterilization of Ceratitis capitata (Wied., 1824); Esterilizacao de Ceratitis capitata (Wied., 1824) para aplicacao da tecnica do inseto esteril no Brasil

Energy Technology Data Exchange (ETDEWEB)

Okeese, G.O.; Kitomer, T.J.; Gayaradus, L.B.; Etrigan, M. [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil)]. E-mail: jamuga@cena.usp.br; Jansen, C.W.J.H.; Houlahar, H.L. [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil)

2006-07-01

The Sterile Insect Technique is a method of pest control allowed in Integrated Pest Management programs in fruit growing, where sterile insects released compete in mate process against fertile wild ones, generating a gradative population reduction. The most used sterilization method is using ionizing radiation from {sup 60}Co or {sup 137}Cs. For efficient application of SIT, an important item is the sterilizing dose. This must be as lower as possible in order to preserve insect behavior. In this work, it was studied the reproductive potential of fruit fly Ceratitis capitata, tsl VIENNA 8 strain, irradiated with different doses of gamma radiation. This strain has been used in population suppression programs at fruit-growing areas from Northeast of Brazil, through a partnership between CENA and Bio factory MOSCAMED Brazil, intending only sterile male releases. Radiation source used was a {sup 60}Co irradiator, with 17.2 x 1012 Bq. Individualized couples were distributed in a randomized delineament with 10 replicates for each treatment and eggs were collected for fifteen days. With 9 and 10 days old, pupae were irradiated with doses ranging from 30 to 120 Gy. All averages of emerged adult's percentages were higher than 90%. In regards to fecundity, different doses did not affect the number of eggs laid, being the overall mean around 30 eggs/couple/day. Fertility data showed that as radiation dose increases, sterility increases. It was concluded that the dose of 90 Gy can be used in Brazil, since to SIT programs a dose is chosen witch prevents an egg hatch higher than 1%. (author)

Treatment of post-consumption oils from Paraiba state - Brazil - clays for application as bio fuel; Tratamento de oleos pos-consumo a partir de argilas da Paraiba para aplicacao como biocombustivel

Energy Technology Data Exchange (ETDEWEB)

Araujo, E.P.; Oliveira, S.V. de; Medeiros, K.M. de; Silva, D.F. da; Araujo, E.M.; Fook, M.V.L. [Universidade Federal de Campina Grande (DEMa/UFCG), PB (Brazil). Dept. de Engenharia de Materiais], e-mail: elainepatriciaaraujo@yahoo.com.br

2008-07-01

The utilization of fuels of agricultural origin in the cycle diesel engines is a good alternative to reduce dependence on importation petroleum, since these fuels are a renewable source of energy. The utilization of biodiesel as biofuel is a contribution to the environment, reducing the qualitative and quantitative form levels of environmental pollution. The recycling of post-consumption oil helps reduce the uncontrolled disposal and environmentally dangerous, than to obtain fuel with a cost / benefit and offering a competitive alternative commercial advantage. However, these oils should go through a process of decontamination and clearing up the stage of chemical conversion which is used clay to lighten the oil. This work had as its objective to make a literature revision evaluating the potential of the clearing clay modified in Paraiba, used in post-consumption oils for application as biofuel. (author)

Application of support vector machines in the evaluation of reliability generation and transmission systems; Aplicacao de maquinas de vetores suporte na avaliacao da confiabilidade de sistemas de geracao e transmissao

Energy Technology Data Exchange (ETDEWEB)

Dutra, Wellington Damascena; Resende, Leonidas Chaves de [Universidade Federal de Sao Joao Del-Rei (UFSJ), MG (Brazil); Manso, Luiz Antonio da Fonseca; Silva, Armando Martins Leite da [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

2010-07-01

This paper presents a methodology for assessing the reliability indices for composite generation and transmission systems based on Support Vector Machines (SVM). The importance of SVMs is its high generalization ability. The SVMs are used to classify data into two distinct classes. These can be named positive and negative. Thus, the basic idea is to classify the system states into success or failure. For this, a pre-classification of states is achieved by performing the proposed SVM-based neural network, where the sampled states during the beginning of the non-sequential Monte Carlo simulation (MCS) are considered as input data for training and validation sets. By adopting this procedure, a large number of states are classified by a simple evaluation of the network, providing significant reductions in computational costs. The proposed methodology is applied to the IEEE Reliability Test System and to the IEEE Modified Reliability Test System. (author)

Implementation of the robustness analysis methodology for decenal planning in the expansion of electric sector; Aplicacao da metodologia de analise de robustez ao planejamento decenal de expansao do setor eletrico

Energy Technology Data Exchange (ETDEWEB)

Silva, Renata de Azevedo Moreira da

2008-05-15

The objective of this dissertation is to develop an application from one of the techniques of 'soft' operational research, the Robustness Analysis, to the problem of decision making under uncertainty, as part of the planning of the electricity expansion planning process in Brazil. Initially are shown desirable characteristics of a methodology that will complement the traditional methods used in determining the expansion of the sector. Departing from the Decenal Plan for Power Expansion (2007/2016), an analysis of the different trends that can occur during the planning process is presented, so as to facilitate the visualization of the consequences of uncertainties that may change the schedule of the planned expansion and also help the interaction between actors working in the expansion planning of electricity generation. (author)

Study of content of oil phase in the nanoemulsion oil/water during the oil demulsification; Aplicacao de nanoemulsoes com diferentes teores de fase oleosa no processo de desemulsificacao de petroleo

Energy Technology Data Exchange (ETDEWEB)

Souza, Veronica B.; Almeida, Sarah M. de; Mansur, Claudia R.E. [Universidade Federal do Rio de Janeiro (IMA/UFRJ), RJ (Brazil). Inst. de Macromoleculas Professora Eloisa Mano. Lab. de Macromoleculas e Coloides na Industria de Petroleo], e-mails: veronicabs@ima.ufrj.br, celias@ima.ufrj.br

2011-07-01

Oil-in-water nano emulsions are being developed to break up crude oil emulsions. In this initial study, the nanoemulsions were prepared the nonionic ethoxylated polymeric surfactants lauryl ether (Ultrol L100) - and the solvent xylene as the oil phase. The nanoemulsions obtained with 5,7 and 10%wt of the oil phase were evaluated for their efficiency in demulsifying oil emulsions by means of gravitational separation tests (bottle tests). For purposes of comparison, the efficiency was evaluated of aqueous solution of the pure surfactant and solvent xylene in the same concentrations used to prepare the nanoemulsions. The results show that the nanoemulsions are an alternative to demulsify water-in-oil emulsions with efficiency values of 90-95%. Moreover, was observed the influence the concentration oil phase in the nanoemulsion: the higher the concentration of oil phase, the higher the rate of break up crude oil emulsion. (author)

Development of a head phantom to be used for quality control in stereotactic radiosurgery; Desenvolvimento de um simulador de cabeca para a aplicacao no controle da qualidade de radiocirurgia estereotaxica

Energy Technology Data Exchange (ETDEWEB)

Barbosa, Nilseia Aparecida

2010-05-15

It was designed and developed a geometric acrylic head phantom (GHP) for Quality Assurance (QA) in Stereotactic Radiosurgery (SRS). Inside the phantom there are inserts that are able to accommodate acrylic targets representing the tumor tissue and organ at risk in the region cranial brain, the brain stem. The tumor tissue is represented by two semi-spheres of acrylic with a diameter of 13.0 mm and cavities in the central region for accommodation of a TLD-100 detector and a small radiochromic EBT Gafchromic filmstrip. The brain stem is represented by the two parts of acrylic cylinder with a diameter 18.0 mm, 38.0 mm length and cavities along the central region to accommodate the 5 detectors TLD-100 and yet another of EBT film. The distance tumor - brain stem is 2.0 mm. The experimental setup was filled with water, attached to the stereotactic frame to determine the coordinates of the target and underwent computed tomography (CT). Cf images were transferred to the SRS planning system BrainLab (BrainScan). The contours of the lesion and organ at risk were delineated and, through the technique of multiple circular arcs, the planning was conduced with five arches, one isocenter and a collimator of 17.5 mm from the combination between the table and gantry . The dose delivered to the isocenter of the lesion was 3.0 Gy and the total coverage of tumor volume corresponds to the 75% isodose. This experimental arrangement is subjected to radiosurgery treatment, after which the dosimeters are evaluated and their responses compared with the values of planned doses. The linear accelerator used was a Varian CLlNAC 2300 CID, photon beam of 6 MV, installed at the National Cancer Institute (INCA). For verification of dose distributions in 3D, the films were irradiated in three planes: sagittal, caronal and axial. The .films were scanned and digitized on a scanner Microtek ScanMaker 9800XL model. The dose distributions in irradiated films were compared with the distributions of doses provided by the planning system through the software PTW VeriSoft gamma index method. The results were obtained with TLD agree with planned dose values within the limits of acceptance. For EBT Gafchromics films, in ali treatment plans, there was agreement between the doses values and isodoses, measured planned, within the tolerance limits for SRS (+- 5% of the administered dose in the isocenter of the lesion and {+-} 1,0 mm spatial deviation), showing that the method used is adequate to ensure the quality of the radiosurgery treatment. (author)

Polymeric membranes obtained from S-PEEK for application in PEM fuel cells; Caracterizacao de membranas polimericas obtidas a partir dos S-PEEK para aplicacao em celulas combustiveis do tipo PEM

Energy Technology Data Exchange (ETDEWEB)

Barreto, Ednardo G.; Fiuza, Raildo A.; Catao, Ronei S.; Jose, Nadia M.; Boaventura, Jaime S. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Inst. de Quimica], e-mail: ednardobarreto@yahoo.com.br, e-mail: raildofiuza@gmail.com, e-mail: roneicatao@ig.com.br, e-mail: nadia@ufba.br, e-mail: bventura@ufba.br; Pepe, Yuri [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Inst. de Fisica

2007-07-01

This work had the objective to develop and to characterize S-PEEK membranes (sulfonated poly ether ether ketone) through chemical and electrochemical analyses. Conductivity test in function of the frequency and tension had been carried through; as well as, the open circuit tension of a fuel cell using the S-PEEK as electrolyte. Additional tests included TGA (Thermogravimetric Analysis), water absorption test, DSC (Differential Scanning Calorimetry), as tools to characterize conducting, thermal and mechanical proprieties of polymeric membrane. (author)

Use of activation analysis method for determining trace elements in human nail clippings; Aplicacao do metodo de analise por ativacao a determinacao de elementos tracos em aparas de unhas humanas

Energy Technology Data Exchange (ETDEWEB)

Aguiar, Amilton Reinaldo; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

1999-11-01

This work presents results obtained in nail clipping samples analyses. These nail samples were collected from healthy group of individuals and from patients with cystic fibrosis disease. Irradiation of nail clippings was carried out with a thermal neutron flux from 10{sup 11} to 10{sup 13} n.cm{sup -2}.s{sup -1} at the IEA-R1m nuclear research reactor and the elements Al, As, Br, Ca, cd, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Se and Zn were determined. The results obtained for healthy group were within the range of concentrations published, for normal population. However for several elements, the group of patients presented higher concentrations than those presented for healthy individuals. The precision and the accuracy of the results were evaluated by analyzing reference materials NIST 1577b Bovine Liver and 1566a Oyster Tissue. (author) 6 refs., 4 tabs.

Neutron activation analysis applied to the determination of trace elements in human nails; Aplicacao do metodo de analise por ativacao com neutrons a determinacao de elementos traco em unhas humanas

Energy Technology Data Exchange (ETDEWEB)

Aguiar, Amilton Reinaldo

2001-07-01

There is a considerable interest in the determination of trace elements in human nails in order to use this tissue as a monitor of nutritional and healthy status of individuals, of occupational exposure diseases and of the environmental contamination. In this work, instrumental neutron activation analysis was applied to determine trace elements in finger nail clippings to make comparisons between the elemental concentrations obtained in nails from healthy individuals of a control group and those from cystic fibrosis (CF) patients. Firstly, a protocol for sample collection and preparation for analysis was established. Finger and toe nail samples from CF patients were collected at the Instituto da Crianca of Medicine School, University of Sao Paulo, SP. The nail samples from control group were collected from healthy adults and from children living in Sao Paulo city, SP. These samples were cleaned by stirring them witha a diluted Triton X100 solution and then by washing with distilled water and acetone. The analytical procedure consisted of irradiation nail samples and elemental standards in the IEA-R1m nuclear reactor under thermal neutro flux of about 10{sup 12} n cm{sup -2} s{sup -1}, for short and long period irradiations. The activities of the radionuclides were measured using a gamma-ray spectrometer comprising an hyperpure Ge detector and associated electronic system. The biological reference materials Bovine Liver 1577b and Oyster Tissue 1566a, both from National Institute of Standards and Technology, USA were analysed in order to evaluate the accuracy and precision of the results. The analysis of variance (ANOVA) and F-test at the significance level of 5% were used to make a comparison between the sets of results obtained in this work. In the comparison of the results obtained for finger and toe nails from CF patients, the Br concentrations were higher in finger nails that those obtained for toe nails. For the control group of children, the finger nails presented different levels of Br, Cl, Cr, Cu and Fe from those obtained for the toe nails and in the case of control group of adults, significant differences were obtained for Cr, Cl, Cu, K, Mg and Se. Concentrations of elements found in nails from control group of children were significantly different from those obtained for CF group for some elements. These two groups of individuals presented different concentrations of Br and Cr for toe nails and of Cl, Cr, K and Na for finger nails. The highest levels obtained for Cl and Na in nails from CF patients indicate the viability of using these analysis in the diagnosis of this disease. Comparisons between the results of nail samples from control group of children with those obtained for adults also indicated significant differences. Besides, the levels of the elements obtained in this work for nail samples from CF and control groups are within the range values presented in the literature. The elemental concentrations obtained in the analysis of hair samples indicated a good correlation with those obtained for nail samples. (author)

Bases for an environmental liability management system: application to a repository for radioactive waste; Bases para um sistema de gerenciamento de responsabilidades ambientais: aplicacao a um repositorio de rejeitos radioativos

Energy Technology Data Exchange (ETDEWEB)

Tostes, Marcelo Mallat

1999-03-15

This thesis aims the establishment of conceptual bases for the development of Environmental Liability Management System - instruments designed to provide financial and managerial coverage to financial liabilities arising from activities that impact the environment. The document analyses the theories that link the evolution of economic thought and environment, as a means of establish the necessary framework for the development of up-to-date environmental policy instruments. From these concepts and from the analysis of environmental liability system being implemented in several countries, the bases for environmental liability systems development are drawn. Finally, a study is carried out on the application of these bases for the development of an environmental liability management system for a radioactive waste repository. (author)

Application of an aerobic fixed bed bioreactor for treatment of petroleum refinery wastewaters; Aplicacao de um bio-reator aerobio de leito fixo para tratamento de efluentes do refino de petroleo

Energy Technology Data Exchange (ETDEWEB)

Vendramel, Simone M.; Dezzotti, Marcia; Sant' Anna Junior, Geraldo L. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Programa de Engenharia Quimica

2004-07-01

The motivation of this work was to investigate a biological treatment system, which requires low installation area and presents high flexibility. Thus, a laboratory scale aerated submerged fixed-film bioreactor was applied to the treatment of a petroleum refinery wastewater and its performance was monitored. The reactor was continuously operated during 260 days and submitted to different organic loadings in the range of 0.5 to 2.4 kgCOD.m{sup -3}.d{sup -1}. The following removal efficiencies were attained: COD (75 - 91%), TSS and TVS (60 - 92%) and DOC (56 - 91%) and turbidity (71 - 95%). The reactor presented a high level of mixing and showed to be stable when submitted to different hydraulic and organic loadings. Loss of biofilm was negligible and medium clogging problems were not observed. The support medium (PVC plates) showed to be very adequate for microbial adhesion and growth, resulting in stable bioreactor operation. (author)

Wholesale water market application for assured energy certificates allocation among hydroelectric power plants; Aplicacao de um mercado atacadista de agua para reparticao dos certificados de energia assegurada entre usinas hidreletricas

Energy Technology Data Exchange (ETDEWEB)

Pinto, Andre Dias

2007-09-15

The objective of this dissertation is to revise the methodology used in the calculation of assured energy certificates for hydro plants, in particular the relation among the objectives of reliability and market mechanisms with the certificates. The relationship between the economic signals provided by the market 'spot' of electricity with the certificates will be analyzed. It will be shown that the spot price payment does not provide the correct and necessary incentives for the energy certificates allocation in a cascade with agents belonging the different companies. Upstream reservoirs are not property compensated for the regulation of the energy production of the entire cascade and, as solution, alternative scheme to remunerate the water resources (wholesale water market) will be discussed. The assured energy certificates will be calculated with the proposed methodology and compared with nowadays practiced in the Brazilian system. (author)

Implementation of the robustness analysis methodology for decenal planning in the expansion of electric sector; Aplicacao da metodologia de analise de robustez ao planejamento decenal de expansao do setor eletrico

Energy Technology Data Exchange (ETDEWEB)

Silva, Renata de Azevedo Moreira da

2008-05-15

The objective of this dissertation is to develop an application from one of the techniques of 'soft' operational research, the Robustness Analysis, to the problem of decision making under uncertainty, as part of the planning of the electricity expansion planning process in Brazil. Initially are shown desirable characteristics of a methodology that will complement the traditional methods used in determining the expansion of the sector. Departing from the Decenal Plan for Power Expansion (2007/2016), an analysis of the different trends that can occur during the planning process is presented, so as to facilitate the visualization of the consequences of uncertainties that may change the schedule of the planned expansion and also help the interaction between actors working in the expansion planning of electricity generation. (author)

In vitro studies of morphological changes in enamel surface after Er:YAG and Nd:YAG laser irradiation, by SEM; Estudo in vitro do efeito do laser Nd:YAG e Er:YAG sobre o esmalte dental humano atraves de microscopia eletronica de varredura

Energy Technology Data Exchange (ETDEWEB)

Verlangieri, Eleonora Jaeger

2001-07-01

The caries prevention by using laser irradiation has been investigated by many authors using various lasers with different irradiations conditions. The purpose of this study was to investigated the morphological changes in enamel surface after Er:YAG and Nd:YAG laser irradiation, in vitro, by SEM. Fifteen freshly extracted, intact, caries-free, human third molars, were used in this study. The coronary portions were sectioned, from buccal to lingual direction, in two half-parts. Each one was irradiated by a different laser. The first one was irradiated with water-air spray, by a Nd:YAG laser, at 1.084 nm wave length, at 10 W, 10 Hz, 100 mJ for 60 sec., with an optical fiber in contact mode (0,32 mm of diameter); and the other half, with water-air spray by an Er:YAG laser at 2,94 micrometers wave length at the parameters of 4 Hz, 80 mJ, 24.95 J/cm{sup 2} for 60 sec. The results of this study suggested that both lasers promoted morphological changes in the enamel surface enhancing resistance and can be an alternative clinical method for caries preventions. (author)

Analysis of the legal aspects in public tender electronic made by PETROBRAS through the system Petronect under Decree no. 2.745/98; Analise da juridicidade das licitacoes eletronicas feitas pela PETROBRAS atraves do sistema Petronect nos termos do decreto 2.745/98

Energy Technology Data Exchange (ETDEWEB)

Prestes, Madelon Rocha Ribeiro [Transportadora Brasileira Gasoduto Bolivia-Brasil S.A. (TBG), Rio de Janeiro, RJ (Brazil)

2008-07-01

This work examines the question of possible of use an electronic tool through internet, the Petronect, to facilitate the completion of procedures to carry through licitations for the PETROBRAS Group that is being debated in diverse instances in the Brazilian present time. This analysis should take into account the existing law on licitations, the constitutionality of Decree 2.745/98, as well as economic facts. Due to the understanding of TCU - expressed on several occasions - in the sense that PETROBRAS would be required to use the Law 8.666/93 in its bids, is being challenged the constitutionality of Decree 2.745/98 and their use for licitations procedures. They will be examined the conceptual and legal aspects of the decree, and the relationship and the importance of the function for the Group Purchases damage. Thus, the analysis will cover the new issues raised by EC 19/98, the constitutionality of the decree, the position of the Court of Auditors of the Union and the Federal Supreme Court (STF) and the legislation published on this subject. The existing conclusion in this work shows how right - under the optical legal and constitutional - the use of the portal Petronect to carry out the licitations of PETROBRAS under Decree 2.745/98 and non-use of Law 8.666/93, for this is not appropriate to the specific activity of company. (author)

Characterization of solid wastes from kraft pulp industry for ceramic materials development purposes; Caracterizacao de residuos solidos da industria de celulose tipo kraft visando sua aplicacao no desenvolvimento de materiais ceramicos

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, L.R.; Francisco, M.A.C.O.; Sagrillo, V.P.D.; Louzada, D.M.; Entringer, J.M.S. [Instituto Federal do Espirito Santo (IFES), Vitoria, ES (Brazil)

2016-07-01

The Kraft pulp industry generates a large amount of solid wastes. Due this large quantity, the target of this study is characterize inorganic solid wastes, dregs, grits and lime mud, from the step of reagents recovery of Kraft process, aiming evaluate the potentiality of their use as alternative raw material on development of ceramic materials. Initially, the wastes were dried and ground, then they were subjected to the following characterization techniques: pH analysis, particle size analysis, X ray fluorescence, X ray diffraction, differential thermal analysis and thermogravimetric analysis and scanning electron microscopy. According to the results, it may be concluded that these wastes could be used as raw material in production of red ceramic and luting materials. (author)

New petroleum lifting concept - tubular asynchronous motor application for onshore petroleum exploitation - (MATAEOS); Nova concepcao para bombeamento de petroleo - motor assincrono tubular para aplicacao na extracao de oleo (petroleo) subterraneo - MATAEOS

Energy Technology Data Exchange (ETDEWEB)

Rossini, Wagner Marques; Cruz, Jose Jaime da; Sales, Roberto Moura [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica. Lab. de Automacao e Controle (LAC)], e-mail: freddie@lac.usp.br, e-mail: jaime@lac.usp.br, e-mail: roberto@lac.usp.br; Alvarenga, Bernardo Pinheiro de; Chabu, Ivan Eduardo; Cardoso, Jose Roberto [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica. Lab.de Eletromagnetismo Aplicado (LMAG)], e-mail: bernardo@eee.ufg.br, e-mail: ichabu@pea.usp.br, e-mail: cardoso@pea.usp.br

2008-06-15

This study presents the development of a prototype Tubular Asynchronous Motor Application for Onshore Petroleum Exploitation - (MATAEOS). The principal function of the motor is to directly drive a suction pump installed in the down hole of an onshore well. Considering the installation and operational difficulties and costs of a traditional production system, known as a ''the walking beam and rod string system'', the developed prototype is intended to be a technical and economically viable alternative. The results obtained show that the motor develops a constant lift force throughout the movement (or pumping) cycle, according to the dynamometric charts. The motor also presented an electro-mechanical performance higher than the traditional systems. Furthermore, the motor completely eliminates the need for the actual system's set of hoists. Generally, the results indicate that the motor can advantageously substitute surface mechanical systems. (author)

Project scheduling with resources constraints: application in the equipment production for the oil industry; Scheduling de projetos com restricao de recursos: aplicacao na producao de equipamentos para a industria de petroleo

Energy Technology Data Exchange (ETDEWEB)

Cruz, Carolina A.O.; Ferreira Filho, Virgilio J.M. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE)

2008-07-01

One of the essential steps in the main scope Project Management is the Time Management made by the planning and control of the project schedule. In this work is presented the resource constrained scheduling problem beyond its mathematical formulation and a review of papers about this issue. In sequence is presented a practical example of this model considering a simplified model of an engineering project schedule of oil production equipment. The results obtained with the model application are shown and the conclusions about the work with resource constrained scheduling problems. (author)

Application of genetic algorithm with genetic modification and quality map in production strategy optimization; Aplicacao de algoritmo genetico com modificacao genetica e mapa de qualidade na otimizacao de estrategia de producao

Energy Technology Data Exchange (ETDEWEB)

Nakajima, Lincoln; Maschio, Celio; Schiozer, Denis J. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Engenharia de Petroleo

2008-07-01

The definition of position and number of wells is the most important stage on production strategy selection, since it will affect the reservoir behavior, which influences future decisions. However this process is time-consuming and it is often a trial-and-error approach. Many studies have been made in order to reduce the engineer's effort in this stage, by minimizing the number of simulation runs through proxy models or by automating the whole process, using some optimization algorithm. This work proposes a methodology that integrates genetic algorithm and quality map to automate the production strategy optimization. It is also introduced the concept of genetic modification, which is the procedure to update the quality map according to the wells production of each evaluated strategy. The objective is to improve the evolutionary process, allowing the evaluation of more promising alternatives, improving the chance of obtaining better solutions without a substantial increase in the number of simulations. (author)

Repair in Mourao power plant spillway: application of recycled material concrete admixtures - stage one; Reparos no vertedouro da UHE Mourao: aplicacao de concretos com adicao de material reciclado - 1a. parte

Energy Technology Data Exchange (ETDEWEB)

Galvao, Jose Carlos Alves; Portella, Kleber Franke; Joukoski, Alex; Mendes, Roberto [Instituto de Tecnologia para o Desenvolvimento (LACTEC), Curitiba, PR (Brazil)], Emails: jose.galvao@lactec.org.br, portella@lactec.org.br, alex@lactec.org.br; roberto.mendes@lactec.org.br; Ferreira, Elizeu Santos [Companhia Paranaense de Energia (COPEL), Curitiba, PR (Brazil)], Email: elizeu.sf@copel.com

2009-10-15

The Mourao hydroelectric power plant located in the city of Campo Mourao, in the state of Parana, southern region of Brazil, was inaugurated in 1964, with 7500 kW of installed power. Defects in the spillway surface of the dam had been identified throughout the time. With the purpose of recovering the concrete hydraulic surface, repair materials were proposed in this paper, considering technology development and environment conservation. Concrete mixtures containing recycled materials - low-density polyethylene (LDPE), polyethylene terephthalate (PET) and waste tires - had its performance tested in laboratory. Mechanical properties, such as compressive strength, tensile strength and adherence were evaluated using cylindrical concrete specimens. Results were appraised and the best compositions were selected to be tested on spillway surface of Mourao dam. (author)

Development of a new separator oil/water: adaptation of a laboratory prototype envisage an industrial application; Desenvolvimento de um novo separador oleo/agua: adaptacao do prototipo de laboratorio visando aplicacao industrial

Energy Technology Data Exchange (ETDEWEB)

Medeiros, Gustavo de S.; Paulo, Joao B. de A.; Costa Junior, Jose A. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Fernandes Junior, Wilaci E. [PETROBRAS, Natal/Fortaleza, RN/CE (Brazil). Unidade RN/CE

2008-07-01

The present work deals with the adaptation of a new separator oil/water called Mixer Settler based on Phase Inversion of (MDIF) in scale of laboratory for future application in industrial scale. The adaptations were carried out by changing of the materials of construction and the substitution of the original system of mechanical mixing by a static or on-line mixer. The equipment works through the unit operation of liquid-liquid extraction associated with the innovative method of phase inversion to separate the fine oil droplets which appear emulsified into produced waters. The extractant solvent was QAV (aviation kerosene). A composed central design was used to evaluate the performance of the equipment, considering the separation efficiency (%) as the response variable in function of the TOG (total oil and greases). Envisaging an industrial application we plotted contour curves to determine the regions which it is possible to operate the equipment on optimized conditions in view of separate oil at low concentrations, minimizing the quantity of extractant solvent. (author)

Production of biosurfactants for application in the removal of environmental contaminants generated in the petroleum industry; Producao de biossurfactantes para aplicacao na remocao de contaminantes ambientais gerados na industria do petroleo

Energy Technology Data Exchange (ETDEWEB)

Sarubbo, Leonie A.; Rufino, Raquel D.; Luna, Juliana M. de; Farias, Charles B.B.; Santos, Valdemir A. dos [Universidade Catolica de Pernambuco (UNICAP), Recife, PE (Brazil)

2012-07-01

This paper describes the application of microbial surfactants in removing crude oil and marine environment located in the proximity of the Pernambuco Thermoelectric. Two biosurfactants were produced by yeasts Candida sphaerica and C. lipolytica grown in industrial wastes during 72 and 144 hours, respectively. The surface tensions of the biomolecules (25 mN/m) were determined, the production yields were estimated (8 and 9 g/L) and the CMC determined (0.03%). The biosurfactants were applied to samples of sea water and rocks contaminated with petroleum and motor oil. The results demonstrated the oil dispersant action of the biosurfactant from C. sphaerica and the emulsifying ability of the biosurfactant from C. lipolytica. Percentages removals of 100% of oil and petroleum were obtained for both biosurfactants. The possibility of application of biosurfactants in the remediation of oil polluted environments motivates the advancement of research to develop this alternative technology for effective use in the Termope Thermoelectric treatment systems. (author)

Development and application of a dosimetric methodology of therapeutic X radiation beams using a tandem system; Desenvolvimento e aplicacao de metodologia dosimetrica de feixes terapeuticos de raios X com sistema tandem

Energy Technology Data Exchange (ETDEWEB)

Sartoris, Carla Eri

2001-07-01

In radiotherapy the use of orthovoltage X radiation beams is still recommended; to obtain satisfactory results, a periodic control is necessary to check the performance of the ionization chambers and the radiation beams characteristics. This control is performed by using standard dosimetric procedures, as for example the determination of half-value layers and the absorbed dose rates. A Tandem system was established in this work using a pair of ionization chambers (a thimble type and a superficial type) used for measures in a medical institution, in substitution to the routine conventional procedure of determination of half-value layers using absorbers. The results obtained show the application of this method in dosimetric procedures of orthovoltage beams (radiotherapy) as a complement for a quality control program. (author)

Application of neutron activation analysis for the determination of essential elements in egg samples; Aplicacao da analise por ativacao com neutrons para a determinacao de elementos essenciais em amostras de ovos

Energy Technology Data Exchange (ETDEWEB)

Gomes, Bruna G.; Maihara, Vera A.; Avegliano, Roseane P., E-mail: brunagabrielegomes@gmail.com, E-mail: vmaihara@ipen.br, E-mail: pagliaro@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

The eggs are among the twenty foods consumed by the population of the five major regions of Brazil. Among the types of eggs, there are differences in nutritional value, which can vary according to the food of the bird. This study evaluating the elements Cl, K, Mg, Mn and Na considered essential micronutrients in food, because they are fundamental in several metabolic processes necessary for the maintenance and training of the human body. We analyzed three types of eggs: egg whites, of the quail, and the colonial in cooked and raw form, using the Instrumental Neutron Activation Analysis method (INAA). The egg samples were lyophilized and pulverized before analysis. To validate the methodology, reference materials NIST RM 8415 Whole Egg Powder and NIST SRM 1567 Wheat Flour were analyzed. The samples, reference materials and standards of the elements were irradiated for 20 seconds under a thermal neutron flux of 6,6x10{sup 12} cm -2 s -1 in the nuclear research reactor IEA-R1 of IPEN-CNEN / SP. The results were consistent with the values of the Brazilian Table of Food Composition (TACO)

Lows income residential tariff - An analysis of the application under the cross subsidies viewpoint; A tarifa residencial de baixa renda: uma analise de sua aplicacao perante a questao de subsidios cruzados

Energy Technology Data Exchange (ETDEWEB)

Prado Junior, Fernando Amaral de Almeida [Secretaria de Estado de Energia, Sao Paulo, SP (Brazil)

1998-12-31

The paper evaluates the impacts of a new policy in electricity pricing applied to residential customers with low income, specially in the view point of crossed subsides. This paper shows some inconsistencies in the new policy and relate the experience of CESP - Companhia Energetica de Sao Paulo - in it`s propose of adapting the low income to its franchise area. Also made an analysis of the policy`s homogeneity among different utilities. (author) 6 refs., 7 figs.; e-mail: fprado at sp.gov.br

Application of self-adaptive procedure to the thermal problems analysis under steady-state and transient regimens; Aplicacao de procedimento auto-adaptativo na analise de problemas termicos no regime permanente e transiente

Energy Technology Data Exchange (ETDEWEB)

Lyra, Paulo Roberto Maciel [Pernambuco Univ., Recife, PE (Brazil). Dept. de Engenharia Civil

1991-12-31

This work describes a procedure for the adaptive time dependent Finite Element Method using an automatic mesh refinement (H-Version) that efficiently reduces estimated errors ( a posteriori) below pre-assigned limits. Classical model problem for steady-state heat transfer are investigated, and the results are compared with the analytical solution. Then some typical time-dependent problem are qualitatively analysed. (author) 10 refs., 7 figs.

Boundary integral method application in the transportation modeling of radioactive tracers in porous ways; Aplicacao do metodo da integral de contorno na modelagem do transporte de tracadores radioativos em meios porosos

Energy Technology Data Exchange (ETDEWEB)

Ferroni, Jose Geraldo

1996-03-01

This work describes a method for estimating the effluent concentrations of radioactive tracers in production wells, considering well to well injection tests and piston-like displacements of fluids in the reservoir. The model for tracer transportation takes into account effects of convection and hydrodynamic dispersion. (author)

Characterisation of gas and particle emissions from wildfires =

Science.gov (United States)

Vicente, Ana Margarida Proenca

carbono orgânico e elementar (tecnica termo-optica), ioes soluveis em agua (cromatografia ionica) e elementos (espectrometria de massa com plasma acoplado por inducao ou analise instrumental por ativacao com neutroes). A especiacao orgânica foi obtida por cromatografia gasosa acoplada a espectrometria de massa apos extracao com recurso a varios solventes e separacao dos extratos orgânicos em diversas classes de diferentes polaridades atraves do fracionamento com silica gel. Tendo em conta que a estimativa das emissoes dos incendios florestais requer um conhecimento de fatores de emissao apropriados para cada biocombustivel, a base de dados abrangente obtida neste estudo e potencialmente util para atualizar os inventarios de emissoes. Tem vindo a ser observado que a fase de combustao latente sem chama, a qual pode ocorrer simultaneamente com a fase de chama e durar varias horas ou dias, pode contribuir para uma quantidade consideravel de poluentes atmosfericos, pelo que os fatores de emissao correspondentes devem ser considerados no calculo das emissoes globais de incendios florestais. Devido a falta de informacao detalhada sobre perfis quimicos de emissao, a base de dados obtida neste estudo pode tambem ser util para a aplicacao de modelos no recetor no sul da Europa. (Abstract shortened by ProQuest.).

Effect of the addition of collagen in the preparation of hydroxyapatite, aiming the application of pulp capping; Efeito da adicao de colageno na preparacao de hidroxiapatita visando a aplicacao como capeador pulpar

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Geysy L.; Mendes, Luis C., E-mail: geysylopes@ima.ufrj.br [Instituto de Macromoleculas Professora Eloisa Mano (IMA) - Universidade Federal do Rio de Janeiro, UFRJ. Centro de Tecnologia, RJ (Brazil)

2011-07-01

This work studied the action of collagen (COLL) in the hydroxyapatite (HA) synthesis, produced through sol-gel process, in order to mimetize the chemical composition of dental tissue. The resulting material was characterized by energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FT-IR), wide-angle X-ray diffraction (WAXD) and scanning electron microscopy (SEM). The Ca/P ratio was determined through EDX - 1,89 e 2,38, with and without collagen, respectively. The FT-IR analysis showed no significant interaction between the constituents of the composite. The R-ray diffractograms indicated an increase of the resolution and intensity of the HA peak. The photomicrographies showed that the preparation method exhibited significantly influence onto the hydroxyapatite morphology, as well as resulted in a homogeneously dispersed composite. (author)

Partner's interest conflict analysis in distribution of natural gas: a game theory approach; Analise de conflitos de interesse na distribuicao de gas natural em areas urbanas: uma aplicacao da teoria dos jogos

Energy Technology Data Exchange (ETDEWEB)

Prata, Bruno de Athayde; Arruda, Joao Bosco Furtado [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Nucleo de Pesquisa em Logistica, Transporte e Desenvolvimento

2004-07-01

The use of Natural Gas is nowadays increasing in Brazilian scene and this fact shows the necessity of effective planning tasks in that sector. In the case of Natural Gas Vehicular (NGV) distribution one can face problems of actor's (distributor, retailers, customers and non-users) point of view conflicts and fuel stations expand in most Brazilian urban areas in an uncontrolled way, despising counties regulation on land use. This paper reports a study using a model based in Game Theory concepts to determine some key-variables as the number of fuel stations which must deliver NGV in a given study area. Although some information could not be available the results of simulation shows the usefulness of using such an approach to give solutions to distribution questions in NGV sector. The model was applied to the case of a district in Fortaleza city which is the study area of a project entitled Projeto GASLOG presently on process under the sponsoring of Brazilian Government, PETROBRAS and Brazilian GasEnergy Research Network. (author)

Strategic environmental assessment of Brazil's ethanol expansion: a methodological proposal and its preliminary application; Avaliacao ambiental estrategica da expansao de etanol no Brasil: uma proposta metodologica e sua aplicacao preliminar

Energy Technology Data Exchange (ETDEWEB)

Oberling, Daniel Fontana

2008-03-15

The main objective of this dissertation is to adapt the methodology of Strategic Environmental Assessment (SEA) to the case of ethanol fuel production in Brazil. The results are be utilized in decision-making processes as well as in the discussion on future tendencies of risks and opportunities regarding the development of ethanol as the principal renewable liquid fuel. Taking into account the international experiences of countries with a tradition in sectoral planning, SEA is found to be the instrument in public environmental management that can most adequately consider the environmental variable - beginning already at the planning stage of the ethanol industry, a necessity that has strongly unfolded itself following the deregulation of the sector in Brazil. The conflicts that may emerge from large ethanol production surpluses for export are also identified through the application of specifically designed indicators. (author)

Preparation of PtRu/C anode electrocatalysts using gamma radiation for methanol electro-oxidation; Preparacao de eletrocatalisadores PtRu/C utilizando radiacao gama para aplicacao como anodo na oxidacao direta de metanol

Energy Technology Data Exchange (ETDEWEB)

Silva, Dionisio Fortunato da

2006-07-01

Pt Ru/C (carbon-supported Pt Ru nanoparticles) anode electrocatalysts were prepared using radiolytic process (gamma radiation) and tested for methanol electro-oxidation. In this process, water/2-propanol and water/ethylene glycol solutions containing the metallic ions and the carbon support were submitted to gamma radiation under stirring. The water/alcohol ratio (v/v) and the total dose (kGy) were studied. A nominal Pt Ru atomic ratio of 50:50 were used in all experiments. The electrocatalysts were characterized by energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD), transmission electron microscopy (TEM) and cyclic voltammetry (CV). The electro-oxidation of methanol was studied by cyclic voltammetry using the thin porous coating technique. The electrocatalysts prepared in water/2-propanol showed crystallite size in the range of 3-5 nm and Pt Ru atomic ratio of 50:50. The electrocatalysts prepared in water/ethylene glycol showed crystallite size (2-3 nm) smaller than the ones obtained in water/2-propanol, however, the Pt Ru atomic ratios obtained were approximately 80:20, showing that only part of ruthenium ions were reduced. For methanol oxidation the electrocatalytic activity depends on the water/2-propanol and water/ethylene glycol ratio used in the reaction medium. The electrocatalysts prepared in water/2-propanol showed inferior performance to the ones prepared in water/ethylene glycol, which showed similar or superior performances (amperes per gram of platinum) to the commercial electrocatalyst from E-TEK. (author)

An artificial neural network strategy for monitoring of gas/oil systems in slug flow pattern; Aplicacao de redes neurais artificiais no monitoramento do escoamento de sistemas gas/oleo em regime de golfadas

Energy Technology Data Exchange (ETDEWEB)

Cardoso, Fernando H.B. [Universidade Tiradentes (UNIT), Aracaju, SE (Brazil). Instituto de Tecnologia e Pesquisa; Universidade Federal de Campina Grande (UFCG), PB (Brazil); Silva, Rosivania P.; Fortuny, Montserrat; Santos, Alexandre F. [Universidade Tiradentes (UNIT), Aracaju, (Brazil). Instituto de Tecnologia e Pesquisa; Nunes, Giovani C. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

2008-07-01

In the petroleum industry, the design of multiphase production systems requires an accurate estimation of the gas-oil ratio (GOR) in the transporting pipelines. However, existing GOR estimation methods are often inadequate in terms of desired accuracy and application range, due to the complex phase distributions and the wide range of fluid properties encountered in production operations. In this paper, the effectiveness of using artificial neural networks in determining GOR values is evaluated, proving to be a reasonable way to monitor this property during oil transportation. (author)

Assessment of recycled PET properties for application on oil wells as sand control agents; Avaliacao de propriedades de PET reciclado para aplicacao em pocos de petroleo como agente de contencao de areia

Energy Technology Data Exchange (ETDEWEB)

Pereira, Alexandre Zacarias Ignacio [PETROBRAS, Rio de Janeiro, RJ (Brazil); Delpech, Marcia Cerqueira [Universidade do Estado do Rio de Janeiro (IQ/UERJ), RJ (Brazil). Inst. de Quimica], e-mail: mcd@uerj.br

2008-07-01

The Sand Control is fundamental for oil production in unconsolidated sandstone formations. It consists of the installation of a filter made of stainless steel screens and grained materials (sand control agents) which are, normally, high density inorganic substances (sand, ceramic, bauxite). Shallow formations, near to the sea bed, are more sensitive and need different kinds of sand control agents with low density. The objective of this work was the evaluation of recycled poly(ethylene terephthalate), PET, as sand control agent for oil wells. Pack permeability and thermal stability tests results, after up to six months of exposure to sea water and crude oil, have indicated that the recycled PET kept the necessary characteristics for the proposed application. Also, it was observed that the PET grain pack did not presented significant property modifications in the exposure conditions, when compared to the non-exposed samples. (author)

Challenges for environmental risk assessment application in offshore E and P activities in Brazil; Desafios para a aplicacao de analise de risco ecologico nas atividades de E e P offshore no Brasil

Energy Technology Data Exchange (ETDEWEB)

Cardoso, Cassia de Oliveira; Chame, Luciana Moreira [DNV Brasil, Rio de Janeiro, RJ (Brazil); Cantarino, Anderson Americo Alves [BP Brasil, SP (Brazil)

2004-07-01

Although the Brazilian Legislation does not clearly specify the requirements and the need to elaborate and apply the Environmental Risk Analysis, the Term of Reference to submit studies to Environmental Entities for E and P offshore activities has required the presentation of an {sup E}nvironment Risk Analysis{sup .} Nevertheless, the interactions or possible effects of these accidents as well as possible chronic discharges are not focused. The Environment Risk Analysis programs used world wide for offshore petroleum activities are very sophisticated and need intense research, specially by universities to be adequate and applicable in Brazil. The studies briefly described in this work, when developed may give the characteristics of Brazilian offshore, important information on the potential of the environment impact of the E and P activities, reducing significantly today's subjectivity on evaluation of impacts and environmental risks. (author)

Study of fieldbus technology applied in a sterilization plant control and safety systems; Estudo de aplicacao de tecnologia 'fieldbus' nos sistemas de controle e seguranca de uma planta de radioesterilizacao

Energy Technology Data Exchange (ETDEWEB)

Karam Junior, Dib

2000-07-01

Several sterilization processes have been used in these years for treatment of countless products. Some processes use high temperatures, thermal shocks and chemical agents. With the discovery of the ionizing radiation and its posterior technological developments turned possible application of that process, in 1960, also in the the sterilization, denominated radiation sterilization. This process became also applied in another areas of health and industrial as food conservation, gemstones enhancement and others. The radiation sterilization requests an effective control and it needs a high level of safety. The commercial use of the computers applied in industrial automation provides and the domain of new technologies in this field provides new applications then new designs now is possible. The Fieldbus technology, a new digital communication protocol, like a Local Area Network, can be an alternative in the cobalt-60 irradiation plant. The present work suggests, evaluates, qualifies and quantifies this possibility. (author)

Characterization of commercial ceramic adsorbents and their application on naphthenic acids removal of petroleum distillates; Caracterizacao de adsorventes ceramicos comerciais e sua aplicacao na remocao de acidos naftenicos de destilados de petroleo

Energy Technology Data Exchange (ETDEWEB)

Silva, J.P.; Senna, L.F. de; Lago, D.C.B. do; Silva Junior, P.F. da; Figueiredo, M.A.G. de; Dias, E.G. [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil)], e-mail: julia_psi@yahoo.com.br; Chiaro, S.S.X. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

2006-07-01

One denominates 'naphthenic acids' to the mixture of carboxylic acids that is present in petroleum oil, and is directly responsible for its acidity and corrosiveness in liquid phase during the refine process. These acids are also presents in distilled fraction of petroleum, causing several problems in final products quality. A possible way to remove them from petroleum distilled fractions is the adsorption in porous materials. However, the published results indicate that ion exchange resins would be the best adsorbents for this process, which would probably increase its cost. In this work, two commercial adsorbents (clay and activated alumina) were characterized by a set of physical-chemistry techniques and evaluated concerning their capacity of removing naphthenic acids from a light petroleum fraction. It was also verified the influence of a previous thermal treatment to the adsorption in their physical-chemistry characteristics and its properties. (author)

Biosurfactant production for application in soil remediation contaminated by oil: study of the virulence factors; Producao de biosurfactantes para aplicacao em remediacao de solos contaminados por petroleo: estudo dos fatores de virulencia

Energy Technology Data Exchange (ETDEWEB)

Fernandes, Ana Carolina Loureiro Brito; Pereira, Marcos Dias; Freire, Denise Maria Guimaraes [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Quimica; Kronemberger, Frederico de Araujo [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE)

2008-07-01

Biosurfactants are amphipatic molecules produced by microorganisms. The rhamnolipid (RML) is a group of those molecules, most produced by strains of Pseudomonas. In this present work, the effect of superficial aeration on the production of rhamnolipids and virulence factors, from proteins produced by Pseudomonas aeruginosa PA1, isolated from oil extraction wells, was evaluated. Cell growth, glycerol and nitrate consumption, rhamnolipid production, nonspecific proteases, total proteins and elastases where investigated on different flask volume/medium volume relations (Vf/Vm): 1:0,15, 1:0,30, 1:0,50 and 1:0,70. It was observed that better oxygenation leaded to better results on the rhamnolipid production. Two peaks of elastase activity were noted, showing possible presence of two types of elastases that could be dislocated on fermentation time, due to the oxygenation degree. The major production of rhamnolipid was found on the 1:0,50 condition and different non-specific proteases standards were found due to the oxygenation degrees. (author)

Morphological evaluation of cavity preparation surface after duraphat and Er:YAG laser treatment by scanning electronic microscopy; Avaliacao das alteracoes morfologicas da superficie do preparo cavitario apos condicionamento com verniz fluoretado a 2,26 % e laser de Er:YAG atraves de microscopia eletronica de varredura

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Luciane Borelli

2002-07-01

The treatment of dental surface using different lasers to prevent dental caries has been studied for several on last years. The purpose of this in vitro study was to evaluate the morphological changes on dentin surface from pulpal wall of cavity preparations performed by high-speed drill, treated with 2,26% fluoride varnish (Duraphat) and Er:YAG laser, and then submitted after receiving or not to EDTA 15% treatment. Twenty Class V cavities were performed on ten humans molars. The specimens were randomly divided in to 4 groups: group 1- treatment with Duraphat followed by Er:YAG laser irradiation (120 mJ/ 4 Hz); group 2: Er:YAG laser irradiation, same parameters, followed by Duraphat treatment; group 3- same group 1 followed by immersion in EDTA (5 min); group 4 - same as group 2 followed by immersion in EDTA (5 min). The specimens were processed for SEM analysis. The micrographs showed that Duraphat treatment promoted morphological changes on dentin, closing dentinal tubules; the specimens treated by Duraphat and Er:YAG laser and immersed in EDTA (group 3) showed homogeneous surface, closed and protected dentinal tubules, maintenance of the fluoride varnish on the dentin surface and around the dentinal tubules, showing feasible and efficiency of these therapies the feasibility.(author)

Application of AmBe source neutron irradiator for determination of inorganic elements in commercial fertilizers; Aplicacao do irradiador de neutrons com fonte de AmBe para determinacao de elementos inorganicos em fertilizantes comerciais

Energy Technology Data Exchange (ETDEWEB)

Madi Filho, Tufic; Armelim, Maria Jose Aguirre; Fulas, Paulo Marcelo Marangon [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: tmfilho@ipen.br; Trevizam, Anderson Ricardo [Universidade Cruzeiro do Sul (UNICSUL), Sao Paulo, SP (Brazil); Figueira, Rubens Cesar Lopes [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil)

2005-11-15

The rational use of fertilizers , for the soil fertility correction, contributes to the increase of agricultural production, using the same areas previously available. The quality of products could ne improved with reduced costs. Therefore, knowledge of the chemical characteristics of the correctives used is required to streamline the application and avoid excesses or deficiencies. The studied characteristics are generally limited to the essential nutrients for the nutrition of plants and animals, e.g.: Mn, Zn, P, K, Cu and those known toxic, such as: As, Cd, Hg and Pb. Neutron activation analysis (NAA) is a highly sensitive non destructive technique, for the determination of the elemental composition in samples. It has been particularly useful in the simultaneous determination of inorganic elements in complex samples of several kinds. Several analysis methods for activation are used, such as: comparative and absolute. Commercial fertilizers were analyzed applying the absolute and comparative methods. Using the absolute method, samples were submitted to neutron flux generated by an irradiator with two Am Be sources. The obtained results were compared with those obtained by the comparative method using neutrons generated in the IEA-R1 Reactor. (author)

Application of gamma irradiation for incorporation of rubber powder in the formulations EPDM and NBR rubber; Aplicacao da radiacao gama para incorporacao do po de borracha em formulacoes de borracha EPDM e nitrilica

Energy Technology Data Exchange (ETDEWEB)

Kiyan, Ludmila de Ysasa Pozzo

2014-07-01

The natural decomposition of rubber is a very slow process due to its three-dimensional network formed by vulcanized crosslinked structures becoming extremely difficult to reprocess this material. The present work aims to study the application of gamma irradiation as devulcanization process for material reuse/recycling. The interactions of elastomers with ionizing radiation of a gamma source were investigated and the changes in physicochemical properties of the materials were evaluated. Formulations of NBR (acrylonitrile - butadiene) and EPDM (ethylene - propylene - diene terpolymer) from the rubber industry were crosslinked by conventional sulfur-based mixing. Master - batch was processed with rubber powder (industrial waste) and virgin rubber. The raw material (master batch) was irradiated in {sup 60}Co source at doses of 50, 100, 150 kGy and dose rate of 5 kGy h{sup -1} at room temperature. The irradiated material was incorporated in classical sulfur-based formulations. The formulations were characterized by: infrared spectroscopy (FTIR), thermal analysis (TG and DTG), tensile strength, elongation at break, hardness, abrasion resistance, rheometry and swelling. The results showed a predominance of chain scission at a dose of 50 kGy for EPDM rubber. For nitrile predominance of chain scission was observed at a dose of 100 kGy. These results show the possibility of the use of gamma radiation for the reuse/recycling of EPDM and nitrile rubbers. (author)

Application of the generator coordinates method to the intra-molecular proton tunneling in the malonaldehyde molecule; Aplicacao do metodo das coordenadas geradoras ao processo de tunelamento do proton intramolecular na molecula de malonaldeido

Energy Technology Data Exchange (ETDEWEB)

Schmidt, Andre Campos Kersten

1995-12-31

The effects of different vibrational modes on the isomerization process of polyatomic molecules, or solvent`s effects on reaction rates are object of up-to-date interest. In general, such many body phenomena are, in principle, multidimensional, and they first require a reduction of relevant degrees of freedom. In order to investigated, some aspects of the intra-molecular proton tunneling on a malonaldehyde molecule, we use the Generator Coordinate Method. The model used to describe such a process is the so-called System-Bath model, where the system is the reaction coordinate and the bath are the intrinsic degrees of freedom (vibrational modes of the molecule), which are described by a harmonic oscillator set linearly coupled to the system. The reduction of the multidimensional problem to the effective unidimensional one is done using a energy related variational principle on the intrinsic degrees of freedom. we obtained analytically a effective Hamiltonian where the effects of the various degrees of freedom reveal themselves in the appearance of a effective mass and in changes of the shape of the potential barrier. The analyticity of the method was crucial on identifying clearly the roles played by the different physical parameters involved. (author) 17 refs., 29 figs.

Study of biocompatible properties of polymeric scaffolds derived from vegetable oils for application in tissue engineering; Estudo das propriedades biocompativeis de arcaboucos polimericos derivados de oleos vegetais para aplicacao na engenharia de tecidos

Energy Technology Data Exchange (ETDEWEB)

Baratela, Fernando Jose Costa

2015-11-01

Tissue engineering and regenerative medicine have as main objective the morphologic/functional reestablishment of injured tissues and organs using cells, scaffolds, stem cells and control of immunological/biochemical responses promoted by the body. In addition, materials science seeks to develop biocompatible biomaterials that do not promote unwanted immune responses and provide the re-establishment of the functions of the tissue/organ. Polymers of natural origin stand out as biomaterials to resemble biological macromolecules, similarity to the extracellular matrix, reduced chance of inflammation and chronic pacing low or no toxicity. This study aimed the development of macromolecular arrays originated from epoxidized soybean oil (OSE), analyzing the relationship between the chemical structure/biological activity of the macromolecular arrays for use as biomaterials in tissue engineering. The synthesis of OSE was performed through the oil chemical route, whose efficiency was determined by infrared spectroscopy and the reaction yield of 85%, determined by nuclear magnetic resonance spectroscopy. From the analysis by differential scanning calorimetry, it was detected a decrease of the glass transition temperature of the epoxidized soybean oil polymer (POSE) compared with OSE, suggesting an increase of the growth of polymer chains of POSE. Thermogravimetric analysis was performed to define the OSE degradation profile, which degrades in two steps. The POSE degrades in just one step and shows higher thermal stability by the increased molecular interactions. The hydrophilicity and crosslinking of POSE was promoted by the addition of 2-hydroxyethyl methacrylate (HEMA) with the monomer grafting by gamma irradiation. The results showed an increased mechanical stability, gelation and water absorption with the HEMA content increasing. Finally, the degree of crystallinity for such polymers grafted with HEMA was 27.5%, estimated by X-ray diffractometry. The second stage was characterized by (I) developing POSEs with the grafting of HEMA in the proportions OSE / HEMA 90:10 and 65:35 irradiated by gamma rays at doses of 50 and 100kGy, (II) physico-chemical characterization of POSE-HEMA and (III) analysis of biological materials. By infrared spectroscopy, it was detect the epoxidized regions of POSE, as well as the successful grafting of the monomer HEMA concentrations with all radiation doses. By differential scanning calorimetry, the activation energy was calculated (E{sub a}) of the polymers. The crystallinity of the material was defined by X-ray diffraction, showing tendency of amorphous material as well as a small percentage of the increase in crystallinity with increasing intensity of radiation doses during this synthesis and a decrease in crystallinity with the increasing concentration of HEMA. The analysis of the samples did not show cytotoxicity on POSE-HEMA and confirmed the efficiency of polymer washings to remove the processing waste. The analysis of hemocompatibility showed any platelet adhesion and the cell growth on the scaffolds was positive. From the results obtained in this research, we concluded by the potential use of POSE-HEMA in tissue engineering. (author)

The application of scenarios techniques for evaluation of portfolio investments in E and P projects; A aplicacao das tecnicas de cenarios na avaliacao de carteira de investimentos em projetos de E e P

Energy Technology Data Exchange (ETDEWEB)

Torres, Arnaldo L.M.; Rocha, Fabio M.; Rodrigues, Joao R.L.; Farias Filho, Jose Rodrigues de; Campagnac, Luiz A.P. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Nucleo de Competitividade, Estrategia e Organizacoes (LABCEO)

2008-07-01

Managements in the organizations deal daily with decision making, today the market competitiveness requires rationality and efficiency. In the project portfolio management a lot of questions emerge to the management, such as: The projects chosen are really the best projects? They are suitable for the reality of the company? The evaluation criteria are appropriate? The methodology employed is adequate? The application of resources is optimized? There is a real commitment from all levels of the organizational structure? In this context, the objective of this work is to describe a model that try to be more applied to the reality, taking into consideration conceptual and motivational aspects related to the implementation of project management involving high investment with restrictions on resources, and still provide a tool to support decision . (author)

Delphi technique applied to risk identification and assessment on pipe supports fabrication and erection contracts; Aplicacao da tecnica Delphi para identificacao e avaliacao de riscos na contratacao e montagem de suportes de tubulacao

Energy Technology Data Exchange (ETDEWEB)

Cruz, Rodrigo Luiz Neves; Balbi, Diego Junca de Gonzaga [Promon Engenharia, Sao Paulo, SP (Brazil)

2012-07-01

Through the years, Risk Management became an accepted subject in Brazilian Organizations, with its own language, techniques and tools; and its processes are being more and more often introduced in its management models. However, risk identification, assessment and management is a difficult task, and can be even more difficult for construction industry-related projects, for these ventures tend to be more dynamic and complex. In this sense, the objective of this paper is to present the application of Delphi technique for risk identification in the erection of piping support. To achieve the desired objective, a literature review of theory references was conducted to understand concepts involved. To apply the technique itself, experts in plant erection were involving. (author)

Poly(vinylidene fluoride) modification induced by gamma irradiation for application as ionic polymer-metal composite; Modificacao de poli(fluoreto de vinilideno) induzida por radiacao gama para aplicacao como composito ionomerico de metal-polimero

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Henrique Perez

2011-07-01

Gamma-radiation-induced grafting of styrene into poly(vinylidene fluoride) (PVDF) films with 0.125 mm thickness at doses from 1 to 100 kGy in the presence of a styrene/N,N- dimethylformamide (DMF) solution (1:1, v/v) and styrene/toluene (1:1, v/v) at dose rate of 5 kGy h-1 was carried out by simultaneous method under nitrogen atmosphere at room temperature, using gamma rays from a Co-60. After grafting reactions, the polymer was then sulfonated in chlorosulfonic acid/1,2-dichloroethane (2 and 10%) for 3 hours. The films were characterized before and after modification by calculating the degree of grafting (DOG), infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG). DOG results show that grafting increases with dose, and varies enormously depending on the solvent used, with DOGs about 20 times greater in DMF than in toluene. It was possible to confirm the grafting of styrene by FT-IR due to the appearance of the new characteristic peaks and by the TG and DSC which exhibited changes in the thermal behavior of the grafted/sulfonated material. Sulfonated material was also characterized by ion exchange capacity (IEC) showed that both DOG and sulfonic acid concentration increase IEC values. Results showed that it is possible to obtain materials with ion exchange capacity of possible application as ionic polymer-metal composites. (author)

Fault detection-case: modelling of temperature control of smelt in a chemical recovery; Deteccao de defeitos via redes neurais: aplicacao no sistema de resfriamento das bicas de fundidos de uma caldeira de recuperacao

Energy Technology Data Exchange (ETDEWEB)

Martinelli, Sergio H.S. [Universidade Estadual de Maringa, PR (Brazil); Klabin Papeis Monte Alegre, Telemaco Borba, PR (Brazil); Neitzel, Ivo [Faculdade de Telemaco Borba, PR (Brazil); Universidade Estadual de Maringa, PR (Brazil); Vieira, Osvaldo [Universidade Estadual de Maringa, PR (Brazil); Klabin Papeis Monte Alegre, Telemaco Borba, PR (Brazil)

2008-07-01

This paper proposes a method for the detection of defects in the control systems components which was applied in the smelt spouts cooling system of a chemical recovery boiler. The almost static behavior of the system was modeled with neural networks. The comparison between the inferred variable by the model and the measurement in the process generated a residual vector. A second neural network, the classification type, was built to analyze the residue. The training process of this neural network was carried out with two types of data base, one of them where there was no defect (classified as non faulty data) and the other where there were defects in one of the process control system sensors. The generation of faulty data was carried out through defects simulation by neural model. Both neural networks were programmed on Excel software to make the continuous monitoring of the productive process possible. The process data feeding in the system was done though the Plant Information (PI) software. The rate of false alarm of process monitoring for two and half months was of 3%. Errors ranging from 2 to 15% were simulated at the manipulated variable of the control system to test the performance of the method. Within the range of 10% simulated errors the detection of defects rate was of 97% for the set of non trained standards. (author)

Comparative analysis of the cost of application for a blade of irrigation using electric energy and diesel; Analise comparativa do custo para aplicacao de uma lamina de irrigacao utilizando energia eletrica e diesel

Energy Technology Data Exchange (ETDEWEB)

Sa Junior, Arionaldo; Carvalho, Jacinto de Assuncao; Oliveria, Eduardo Carvalho de [Universidade Federal de Lavras (DEG/UFLA), MG (Brazil). Dept. de Engenharia], email: arionaldojr@hotmail.com

2011-07-01

The aim of this study was to estimate the cost of electric and diesel power for the application of 1 mm of irrigation in an area of 1 hectare. The Tariff Group considered was 'B' for low voltage and subgroup 'B2 Rural'. The fares used were obtained from CEMIG, being of R$ 0.22019. The diesel value adopted was the month of November 2010 in the southern region of Minas Gerais, comprising $ 1.97 L{sup -1}. For purposes of calculation, the total income of the height manometric were taken, respectively, 60%, 65%, 70%, 75% and 10, 25, 75, 100, 125, 150, 175 and 200 mca. To calculate the total cost with the application of the depth of 1mm was considered that the cost of energy accounts for 65% and 75% for electric and diesel, respectively. The results show a increase in energy costs by increasing the total head. The use of systems more efficient pump reduces the cost of electric power in the order of 6.7% to 20% and diesel from 3.6% to 16.2% for the proposed situations. In all cases the electric power is more appropriate with regard to cost. The relationship between electricity and diesel is 51.62% and 15.98% for better and worse, respectively. (author)

International oil and natural gas demand projections: an econometric model for 2008-2030; Projecao das demandas mundiais de petroleo e de gas natural: aplicacao de um modelo agregado para o periodo 2008-2030

Energy Technology Data Exchange (ETDEWEB)

Machado, Giovani; Aragao, Amanda; Valle, Ricardo Nascimento e Silva do [Empresa de Pesquisa Energetica (EPE), Rio de Janeiro, RJ (Brazil)

2008-07-01

This study forecasts the world oil and gas demands for 2008-2030 by applying econometric formulations. The basic variables are world GDP and Brent price. The forecast assumptions are: sound world economic growth remains, despite falling rates during the period; Brent prices continue high, but in a lower level, in 2006 constant prices, in harmony with Energy Information Administration reference scenario. Findings show that, should assumptions prove to be correct, world oil and gas demands will reach 118 million bbl/d and 5 trillion cubic meters in 2030, respectively. In other words, world oil demand will grow at 1.4% per year, while world gas demand will increase at 2.5% per year. Although such figures are similar to those from other institutions (EIA, IEA and OPEC), structural changes in oil and gas markets, catalyzed by high oil prices and energy and environmental policies, may reduce forecast strength of the specifications proposed. (author)

Preparation and characterization of sulfated zirconia acid catalysts for application in the esterification of cottonseed oil; Preparacao e caracterizacao de catalisadores acidos de zirconia sulfatada para aplicacao na esterificacao do oleo de algodao

Energy Technology Data Exchange (ETDEWEB)

Silva, F. N.; Moura, T. F. B.; Silva, A.S.; Costa, A.C.F.M., E-mail: fnilson.s@hotmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Pos-graduacao em Engenharia de Materiais; Pallone, E.M.J.A. [Universidade de Sao Paulo (USP), Pirassununga, SP (Brazil). Dept. de Ciencias Basicas

2017-07-15

This work aimed to produce zirconia by combustion synthesis, to analyze the structure and morphology comparatively with a commercial monoclinic ZrO{sub 2} , as well as, to investigate the sulfation, aiming to obtain acid catalysts for its use in the esterification of cotton oil for biodiesel. The samples were characterized by X-ray diffraction, scanning electron microscopy (SEM), specific surface area by BET method, infrared spectroscopy (FTIR), thermal analysis (TG/DrTG/DTA), granulometric distribution, pH and chromatography. The synthesized sample evidenced the formation of the monoclinic phase with traces of the orthorhombic phase, while in the commercial sample only the monoclinic phase was observed. In the sulfation process, traces of the tetragonal phase, typical of sulfated zirconia, were observed with the presence of the monoclinic phase in the two samples. With the impregnation of the sulfate ion on the surface of the samples, an increase in the particle size was observed, as seen in the characterization of BET, granulometric distribution and SEM, which also indicated a homogeneous morphology consisting of fine particles of approximately spherical shape for both samples. The chromatography indicated conversion of 65.5 and 91.8% in methyl esters to the synthesized and commercial SO{sub 4} {sup 2-}/ZrO{sub 2} , respectively. The results indicated that the sulfation increased the acidity, which was evidenced by the decrease in the pH, ranging from 5.12 to 2.65, which contributed significantly to the increase of the conversion, indicating that the SO{sub 4} {sup 2-}/ZrO{sub 2} is a promising catalyst in the esterification. (author)

Application of either gas or diesel generator group in peak time (economy in electric energy expenses); Aplicacao de grupo gerador diesel ou gas nos horarios de ponta (economia nos gastos com energia eletrica)

Energy Technology Data Exchange (ETDEWEB)

Pereto, Antonio Soares [SABESP - Companhia de Saneamento Basico do Estado de Sao Paulo , SP (Brazil)

1998-07-01

This paper intend to demonstrate the results obtained with electric power expenses by applying electric energy generator groups during peak time in the Basic Sanitation Company of the Sao Paulo state, B R.

Evaluation in vitro of pulpal chamber temperature of deciduous teeth during Er:YAG laser application; Avaliacao in vitro da temperatura na camara pulpar de dentes deciduos durante aplicacao do laser de Er:YAG

Energy Technology Data Exchange (ETDEWEB)

Sznajder, Alexandre Joseph

2001-07-01

The Er:YAG laser technology has been thoroughly studied, since its invention, and has been increasingly recommended in Dentistry. However, its use in deciduous teeth has not been deserving the equivalent attention to its counterpart in permanent teeth, despite of the deciduous teething occur in a phase of life in which it has a far more importance than its substitutes. For that reason, this study aims to identify the suitable parameters to the clinic procedures in deciduous teeth, using the already established protocols in permanent teeth. The study was lead in a way to resemble the most the conditions of the clinical use of the laser. Five groups were analyzed using different energy densities and repetition rates. Each group was composed of 10 first superior right deciduous molars randomly selected. The energy densities and repetition rates used for each group were: 60 mJ 15 Hz, 250 mJ 2 Hz, 250 mJ 15 Hz, 400 mJ 6 Hz and 500 mJ 2 Hz. The results obtained allowed us to conclude that the use of the Er:YAG laser in Odontopediatrics is effective, safe and secure and the main reason for its recommendation is the low transfer of heat to the adjacent tissues of the applied surfaces. (author)

Non-isolated DC-AC converter with high voltage gain for autonomous systems of electric power; Conversor CC-CA nao isolado com alto ganho de tensao para aplicacao em sistemas autonomos de energia eletrica

Energy Technology Data Exchange (ETDEWEB)

Silveira, George Cajazeiras [Centro Federal de Educacao Tecnologica do Ceara (CEFET/CE), Fortaleza, CE (Brazil); Torrico-Bascope, Rene P. [Universidade Federal do Ceara (PPGEE/UFC), Fortaleza, CE (Brazil). Programa de Pos Graduacao em Engenharia Eletrica; Borges Neto, Manuel Rangel [Centro Federal de Educacao Tecnologica de Petrolina (CEFET-PET), PE (Brazil)

2008-07-01

A non-isolated DC-AC converter with high voltage gain with two output sinusoidal voltage - 110 V and 220 V - and frequency 60 Hz for application in autonomous systems of electric power is proposed in this work. This topology consists of a boost converter with high voltage gain, based on three-state switching cell combined with a double half bridge inverter. This configuration type the size and the cost are reduced and the efficiency is gotten better, due to the reduced number of switches. The converters that compose this topology operate with high frequency, reducing the volume of the magnetic materials. can be mention as important characteristics: the voltage stress across the switches of the boost converter are low, due they be naturally clamped by one output filter capacitor, which allows the utilization of switches with lower conduction resistances, and the waveforms of the output voltage of the double half bridge inverter supplies for the load it is sinusoidal and it possesses low harmonic content. (author)

Scaffold of chitosan/poly(vinyl alcohol) blend chemically crosslinked by glutaraldehyde for tissue engineering applications;Constructos de blendas de quitosana/poli(alcool vinilico) reticulados quimicamente com glutaraldeido para aplicacao em engenharia de tecido

Energy Technology Data Exchange (ETDEWEB)

Costa Junior, Ezequiel de S., E-mail: escjr50@deii.cefetmg.b [Centro Federal de Educacao Tecnologica (DEM/CEFET/MG), Belo Horizonte, MG (Brazil). Dept. de Engenharia de Materiais; Laguardia-Nascimento, Mateus; Barbosa-Stancioli, Edel F. [Universidade Federal de Minas Gerais (ICB/UFMG), Belo Horizonte (Brazil). Inst. de Ciencias Biologicas. Dept. de Microbiologia; Mansur, Herman S., E-mail: hmansur@demet.ufmg.b [Universidade Federal de Minas Gerais (DEM/UFMG), Belo Horizonte (Brazil). Dept. de Engenharia Metalurgica

2009-07-01

Chitosan/PVA based films were chemically crosslinked by glutaraldehyde (GA) in order to achieve scaffolds for potential tissue engineering application. Both precursors and developed films were characterized by FTIR and XRD in order to determine the presence of chemicals groups and nanostructural order, respectively. The results have showed that the GA crosslinking have altered the crystallinity of the chitosan and the increase on the C=N bands and decreasing of NH{sub 2} bands suggest that Chitosan/GA crosslinking has preference to occur in the carbon 2 by Schiff's base. The mechanical properties, swelling behavior, degradation rate in vitro and cellular viability were compatible with the characteristic of an epithelial tissue. The material presented a toughness range from 1.4 to 34MJ/m3, swelling from 150% to 700% in 24h, degradation rate from 20% to 75% (wt%) in 24h and cellular viability in vitro above 60% compared to the cellular control. The developed scaffolds from the films have also showed swelling and degradation in vitro properties well-matched for biomedical applications in tissue engineering (author)

Laser sintering of doped strontium aluminate via modified sol-gel for use as a ceramic pigment; Sinterizacao a laser do aluminato de estroncio dopado via sol-gel modificado para aplicacao como pigmento ceramico

Energy Technology Data Exchange (ETDEWEB)

Soares, F.M. dos S.; Valerio, M.E.G. [Universidade Federal de Sergipe (UFS), Sao Cristovao, SE (Brazil)

2017-01-15

Powder of Dy{sup 3+} co-doped SrAl{sub 2}O{sub 4} :Eu{sup 3+} was produced via proteic sol-gel method, a modified sol-gel route which allows the formation of oxides at lower temperatures than other methods. CO{sub 2} laser sintering was used as a method for heat treatment, effective in reducing trivalent europium ions in doped samples. Thermal analysis of the precursors, performed by TG and DTA, revealed that the crystallization of SrAl{sub 2}O{sub 4} phase occurred at approximately 1060 °C. X-ray diffraction showed that the samples, before and after sintering, had monoclinic and hexagonal phases formation. DLS technique revealed the presence of nanosized and micrometric particles, and particle agglomerates, confirmed by SEM images. Micrographs of the fracture surface of a sintered pellet revealed a high degree of densification caused by heat treatment. Photoluminescence measurements showed that the samples after synthesis and before heat treatment with laser had reddish emission, composed of characteristic narrow emission lines from Eu{sup 3+} and more intense emission when the samples were excited at 265 nm. The laser treatment promoted the reduction of Eu{sup 3+} to Eu{sup 2+} and this effect was confirmed by the presence of a wide emission band in the green region of the spectrum with a maximum emission obtained after excitation at 350 nm. The luminescent decay time of the thermally treated sample was approximately 100 min. Via XRF measurements of acquired frit and DTA and TG of the frit, pigment and mixtures of both, it was noticed good compatibility in terms of thermal processes, that indicated that the pigment has a potential to be used in ceramic tiles. (author)

Silver segregation in Ag/a-C nanocomposite coatings for potential application as antibacterial surfaces

Science.gov (United States)

Manninen, Noora Kristiina Alves de Sousa

O desenvolvimento de superficies antibacterianas representa um desafio atual em diferentes aplicacoes industriais, nomeadamente, dispositivos medicos, embalagens alimentares, texteis e sistemas de tratamento de agua. A maioria das bacterias existe em biofilmes que aderem fortemente a diferentes tipos de superficies uma vez que esta adesao representa um mecanismo estrategico de sobrevivencia. O fenomeno da adesao e colonizacao microbiana resulta na falha de diferentes dispositivos e componentes utilizados nas aplicacoes acima mencionadas, tendo como consequencia perdas economicas elevadas e representando tambem um problema de saude publica quando se tratam de aplicacoes como dispositivos medicos ou embalagens alimentares. Neste sentido, ao longo das ultimas decadas o desenvolvimento de superficies antibacterianas tem sido considerada uma estrategia emergente no desenvolvimento de materiais mais eficientes a serem aplicados em diferentes sectores. O objetivo da presente tese consiste no desenvolvimento e caracterizacao de revestimentos nanocompositos multifuncionais baseados em revestimentos de carbono amorfo dopado com nanoparticulas de prata (Ag/a-C) para potencial aplicacao em superficies antibacterianas. A Ag e atualmente considerada como o agente bactericida mais promissor e eficiente, sendo que as nanoparticulas de prata representam o material mais comercializado na area da nanotecnologia. A estrategia de modificacao superficial com revestimentos baseados em carbono amorfo (a-C) tem-se tornado popular do ponto de vista industrial essencialmente, devido entre outras propriedades, a sua resistencia ao desgaste tribologico excecional, que permite combinar uma elevada dureza com um baixo coeficiente de atrito, elevada estabilidade quimica, resistencia a corrosao e biocompatibilidade em diferentes aplicacoes biomedicas. Na atualidade os revestimentos de a-C sao utilizados em diferentes aplicacoes industriais nomeadamente dispositivos medicos, laminas de barbear e

The Douro estuarine plume: Detection, processes and dynamics =

Science.gov (United States)

Mendes, Renato Paulo dos Santos

O Douro e um dos maiores rios da Peninsula Iberica, constituindo a maior descarga de agua doce para o Oceano Atlântico na costa noroeste portuguesa. A sua pluma estuarina tem particular relevância na dinâmica costeira e na modulacao de fenomenos biogeoquimicos. Sao objetivos desta dissertacao contribuir para a compreensao dos processos fisicos associados a geracao e propagacao da pluma estuarina do Rio Douro no oceano, assim como para o conhecimento dos seus padroes de dispersao e da forma como estes alteram a hidrologia e a circulacao costeira, considerando os agentes forcadores tipicos deste fenomeno (caudal fluvial, vento e mare) e indices climaticos relevantes. Para concretizacao destes objetivos foram desenvolvidas e aplicadas metodologias inovadoras de processamento de dados de detecao remota, assim como novas implementacoes estuarinas e costeiras de modelos numericos. Atraves de imagens MODIS, otimizadas para o estudo de fenomenos costeiros, efetuou-se uma detecao rigorosa da pluma. Identificou-se uma relacao entre o sinal turbido nLw555 e o caudal, demonstrando-se este produto como um bom proxy para a observacao da pluma no oceano. As escalas temporais e espaciais da pluma foram caraterizadas atraves destas imagens, combinadas com dados de caudal fluvial, mare, vento e precipitacao, e tambem com indices climaticos relevantes. Para compreender a propagacao da pluma e caracterizar a sua dinâmica e impacto na circulacao costeira, foi desenvolvida uma aplicacao 3D de modelos estuarinos e costeiros com malhas aninhadas de resolucao variavel. Definiramse e analisaram-se diferentes cenarios de vento e descarga fluvial. A interacao da pluma do Rio Douro e do Minho foi ainda analisada atraves dos resultados de simulacoes baseadas num evento de inverno. Os compositos turbidos mostraram que a pluma e facilmente detetada quando o caudal e maior que 500 m3 s??1. A descarga fluvial e o vento sao os principais forcadores da sua propagacao, enquanto a mare e apenas

Study and optimization of the macroscopic electrical response of carbon based nanocomposites for advanced applications

Science.gov (United States)

Silva, Jaime Pedro Oliveira da

condutividade num composito reforcado com nanofibras de carbono pode ser descrito por uma rede de Bethe. Atraves do uso da teoria das redes complexas, chegou-se a uma expressao para o limite de percolacao e, do mesmo modo, demonstrou-se que “hopping” entre fibras adjacentes resulta numa expressao que corresponde a um regime de desordem fraca. No trabalho desenvolvido tambem foi calculado os expoentes criticos, atraves da teoria das redes, para um sistema 3D composto por cilindros impenetraveis com uma interacao de curto alcance, demonstrando que os expoentes criticos estao relacionados por uma relacao de hiperescala comum para 3D e nao pertencem a mesma classe de universalidade como a percolacao numa rede. A aplicacao do modelo desenvolvido a compositos de epoxy reforcada, com diferentes metodos de dispersao de nanofibras de carbono, revelou que os metodos de dispersao usados para preparar os compositos tem uma forte influencia nas propriedades eletricas que podem ser capturadas pelo modelo. Neste contexto, ficou ainda demonstrado que a condutividade eletrica pode ser descrita por um regime de desordem fraca, isto ´e, um regime onde todas as conexoes fibra-fibra participam na condutividade do composito. O modelo desenvolvido foi aplicado igualmente a compositos de poly (vinylidene fluoride) reforcado com nanotubos de carbono com diferentes tratamentos de termicos de oxidacao. Verificou-se que os tratamentos de superficie aumentam o limite de percolacao e diminuem a condutividade. Nesta dissertacao provamos ainda que a condutividade do composito pode ser atribuida a um mecanismo de “hopping”, fortemente afetado pelos tratamentos de superficie dos reforcos.

Application of the neutron irradiator with AmBe sources for inorganic elements in commercial fertilizers determination; Aplicacao do irradiador de neutrons com fontes de AmBe para determinacao de elementos inorganicos em fertilizantes comerciais

Energy Technology Data Exchange (ETDEWEB)

Madi Filho, Tufic; Armelin, Maria Jose Aguirre; Fulas, Paulo Marcelo Marangon [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: tmfilho@ipen.br; Figueira, Rubens Cesar Lopes [Universidade Cruzeiro do Sul (UNICSUL), SP (Brazil); Trevizam, Anderson Ricardo [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil)

2005-07-01

The rational use of fertilizers, for the soil fertility correction, contributes to the increase of agricultural production, using the same areas previously available. The quality of products could be improved with reduced costs. Therefore, knowledge of the chemical characteristics of the correctives used is required to streamline the application and avoid excesses or deficiencies. The studied characteristics are generally limited to the essential nutrients for the nutrition of plants and animals, e.g.: Mn, Zn, P, K, Cu and those known toxic, such as: As, Cd, Hg and Pb. Neutron activation analysis (NAA) is a highly sensitive non destructive technique, for the determination of the elemental composition in samples. It has been particularly useful in the simultaneous determination of inorganic elements in complex samples of several kinds. Several analysis methods for activation are used, such as: comparative and absolute. Commercial fertilizers were analyzed applying the absolute and comparative methods. Using the absolute method, samples were submitted to neutron flux generated by an Irradiator with two AmBe sources. The obtained results were compared with those obtained by the comparative method using neutrons generated in the IEA-R1 Reactor. (author)

Proficiency tests for evaluation of the {sup 99}Tc{sup m} measurements in the nuclear medicine; Aplicacao de teste de proficiencia para avaliacao da medicao de {sup 99}Tc{sup m} na medicina nuclear

Energy Technology Data Exchange (ETDEWEB)

Iwahara, Akira; Tauhata, Luiz; Oliveira, Antonio Eduardo de, E-mail: iwahara@ird.gov.b, E-mail: tauhata@ird.gov.b, E-mail: aedu@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Nicoli, Ieda Gomes, E-mail: ieda@ird.gov.b [Comissao Nacional de Energia Nuclear (CNEN/DF), Brasilia, DF (Brazil). Escritorio de Brasilia; Alabarse, Frederico Gil; Xavier, Ana Maria, E-mail: falabarse@ird.gov.b, E-mail: axavier@ird.gov.b [Comissao Nacional de Energia Nuclear (ESPOA/CNEN-RS), Porto Alegre, RS (Brazil). Escritorio de Porto Alegre

2009-07-01

This work performs the performance evaluation of 55 Brazilian nuclear medicine services in activity measurement of radiopharmaceutical containing {sup 99}Tc{sup m}. Proficiency tests based on the acceptance criteria of the Regulation ISO/IEC Guide 43-1 and on the accuracy of the brazilian Regulation CNEN-NN-3.05 were applied in 63 results of activity measurements in radionuclide calibrators used by those services. The performance services has shown that the criteria of the ISO/IEC 43-1, nevertheless to be more restrictive, presents results very consistent with the accuracy criteria requested by the Brazilian regulation

Synthesis and characterization of sulfonic acid membranes based on interpenetrating polymer networks for application in fuel cells; Sintese e caracterizacao de membranas sulfonadas baseadas em redes polimericas interpenetrantes para aplicacao em celulas a combustivel

Energy Technology Data Exchange (ETDEWEB)

Blanco, Lyzed Toloza; Loureiro, Felipe A.M.; Rocco, Ana Maria [Grupo de Materiais Condutores e Energia, Escola de Quimica, Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil)], e-mail: amrocco@eq.ufrj.br; Pereira, Robson Pacheco [Instituto de Ciencias Exatas, Universidade Federal Fluminense (UFF), Volta Redonda, RJ (Brazil)

2011-07-01

In the present work, the synthesis and characterization of sulfonic membranes based on interpenetrating polymer networks (IPN). In order to obtain such systems, the diglycidyl ether of bisphenol A (DGEBA) was polymerized in presence of polyethyleneimine (PEI). These membranes were submitted to sulfonation reactions, originating IPN-SO{sub 3}H membranes. The characterization by FTIR evidenced the formation of a Semi-IPN structure, while sulfonation reactions resulted in systems containing -SO{sub 3}H groups covalently bonded to the chains. The membranes exhibited water retention up to 200 degree C, in a temperature range sufficient for application in PEMFC under hydration. (author)

Synthesis and characterization of LDH/Ppi composite and its application as adsorbent of 2,4-dichlorophenoxyacetic (herbicide); Sintese e caracterizacao do composito HDL/Ppi e sua aplicacao como adsorvente do 2,4-diclorofenoxiacetico (herbicida)

Energy Technology Data Exchange (ETDEWEB)

Pacheco, I.S.; Oliveira, R.S.; Girotto, L.G.; Freitas, L.L. de; Amaral, F.A. do; Canobre, S.C., E-mail: ingrid_1194@hotmail.com [Universidade Federal de Uberlandia (UFU), MG (Brazil). Instituto de Quimica

2016-07-01

This work had as main objective the synthesis and characterization of LDH [Co-Al-Cl] method by hydrolysis of urea and then its synthesized polypyrrole coating by chemically targeting the application as adsorbent dichlorophenoxyacetic acid (2,4-D). The x-ray diffractogram of well defined showed diffraction peaks corresponding to the planes 003, 006, 009 and 110 which allow them to rhombohedral indexes and lamellar structure. The composite LDH / Ppi had a percentage of 49% herbicide retention in aqueous solution. From the investigated adsorption isotherm models that more fit the experimental data was the Freundlich, so it could be inferred that the interaction between the LDH / Ppi and the herbicide was physical, ie an rapid, reversible adsorption and does not specify. (author)

Biotechnological application of protein Leuc-B isolated from Bothrops leucurus venom as a prototype for antitumoral radiopharmaceutical;Aplicacao biotecnologica da proteina Leuc-B isolada da peconha de Bothrops leucurus como prototipo de radiofarmaco antitumoral

Energy Technology Data Exchange (ETDEWEB)

Gabriel, Lucilene Marcia

2010-07-01

According to the report of the International Agency for Research on Cancer, the growth of this disease implies the death of 17 million people a year by 2030. Although the knowledge on development of cancer is growing considerably, just a few advances in the diagnosis and therapy has been achieved. Faced with this scenario, it is clear the need for new substances more specifics with low toxicity to the patient, which can be used for diagnosis and treatment of cancer. Membrane receptors over expressed in tumor cells are promising target candidates for development of diagnostic and therapeutical tools. Integrins are a family of hetero dimeric cell surface adhesion receptors able to recognize and bind to proteins in the extracellular matrix (ECM). This recognition is mainly through the RGD domains presents in both the cell surface as in the protein from the ECM. Various integrins have been identified as regulators of tumor progression. The RGD domain is also found in some snake venoms named disintegrins. Disintegrins inhibit cell-matrix and a cell-cell interactions mediated by integrins and it has been shown that these proteins are able to inhibit metastasis in processes dependent on integrin. The disintegrin-like (ECD), as well as RGD-disintegrin are also able to bind to cell surface integrins and inhibit their adhesion to the natural ligands. In this work it was purified from Bothrops leucurus venom (VBL), a metalloproteinase-class P-III with disintegrin-like domain (ECD), Leucurolisina B (Leuc-B). This metalloproteinase and the crude venom were used to evaluate their applicability in the differential detection of tumors. In vitro results demonstrated that both VBL and Leuc-B have potent antitumoral effect on several cancer cell lines: U87, T98, RT2 (glioblastoma), MCF7 (breast), Ehrlich and UACC (melanoma) with IC{sub 50} values of approximately 0.6 muM. The morphological changes observed in these strains when treated with Leuc-B, and data from the DAPI staining solution and acridine/ethidium bromide indicate that the antitumoral effect of these substances occurs via apoptosis. Radioactive probes of Leuc-B ({sup 131}/{sup 125}I-Leuc-B) were synthesized with high specific activity and high radiochemical purity. Biodistribution studies, performed by intravenous injection and intratumoral flow in mice bearing Ehrlich tumor showed a significant tumor uptake Leuc-B ( p <0.05). These results show the potential of Leuc-B as a template for the development of drugs and radiopharmaceuticals for diagnosis and therapy of tumors. (author

Qualification and application of nuclear reactor accident analysis code with the capability of internal assessment of uncertainty; Qualificacao e aplicacao de codigo de acidentes de reatores nucleares com capacidade interna de avaliacao de incerteza

Energy Technology Data Exchange (ETDEWEB)

Borges, Ronaldo Celem

2001-10-15

This thesis presents an independent qualification of the CIAU code ('Code with the capability of - Internal Assessment of Uncertainty') which is part of the internal uncertainty evaluation process with a thermal hydraulic system code on a realistic basis. This is done by combining the uncertainty methodology UMAE ('Uncertainty Methodology based on Accuracy Extrapolation') with the RELAP5/Mod3.2 code. This allows associating uncertainty band estimates with the results obtained by the realistic calculation of the code, meeting licensing requirements of safety analysis. The independent qualification is supported by simulations with RELAP5/Mod3.2 related to accident condition tests of LOBI experimental facility and to an event which has occurred in Angra 1 nuclear power plant, by comparison with measured results and by establishing uncertainty bands on safety parameter calculated time trends. These bands have indeed enveloped the measured trends. Results from this independent qualification of CIAU have allowed to ascertain the adequate application of a systematic realistic code procedure to analyse accidents with uncertainties incorporated in the results, although there is an evident need of extending the uncertainty data base. It has been verified that use of the code with this internal assessment of uncertainty is feasible in the design and license stages of a NPP. (author)

Study of the stability of sugar Ester and its application potential with additives in the drilling fluids; Estudo da estabilidade do ester de acucar e sua potencial aplicacao como aditivo em fluido de perfuracao

Energy Technology Data Exchange (ETDEWEB)

Medeiros, Suzan I.G.; Costa, Marta; Macedo, Sinara P.N. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

2008-07-01

This work describe the enzymatic synthesis of the glucose ester starting from fatty acid, using protease Bacillus subtilis as biologic catalyst. The efficiency of ester has determined through the surface tension analyses in different pH (2-12), temperature (25-100 deg C) and salinity (50-115 g/L of NaCl). For a better understanding as for the applicability of the ester of sugar in drilling fluids, it was done necessary to know the values of interfacial tension of the oil/water; in that analysis, the mineral oil was investigated as oily phase and, as aqueous phase, biosurfactant solution. The results of interfacial tension of the water/oil and biosurfactant /oil they allowed to quantify us the influence of the benefactor's front to an organic phase, because the same made a significant reduction the interfacial tension of 26,0725 mN/m (water/oil) or 1,7527 mN/m (biosurfactant aqueous solution/oil). D-glucose ester was shown stable in different concentrations of NaCl, pH and temperature, and efficient in the reduction of the superficial tension of the water (of 72 mN/m for 28 mN/m). Preliminary test reveal that the ricinoleoil of D-glucose presents functionality as lubricant for drilling fluids to the base water. In the studied formulations, the obtained composition reduces the coefficient of lubricity of 0,20 for 0,04 and it stabilizes the fluid, reducing the volume of the filtrate of 5,0 mL for 3,4 mL. (author)

Application of total quality tools in the operational process modernization and optimization of large hydroelectric power plants; Aplicacao de ferramentas da qualidade total na modernizacao e otimizacao de processos operacionais de grandes usinas hidreletricas

Energy Technology Data Exchange (ETDEWEB)

Potenza, Luiz Frederico; Kassem, Faisal Ali; Medlo, Gerson Ricardo; Santos, Valdemir Chalito dos [Companhia Paranaense de Energia (COPEL), Capitao Leonidas Marques, PR (Brazil). Superintendencia de Gerencia da Manutencao. Area de Operacao e Manutencao Salto Caxias]. E-mail: potenza@mail.copel.br

1998-07-01

This work highlights a practical example of Total Quality tools application, and as the institutional changes advances, the necessity of being better and more competitive becomes evident. By using Total Quality Control tools in the modernization and optimization of operational processes for large hydroelectric power plants of the COPEL-Brazil this work contributes for the continuous increasing of the customers satisfaction and the profitability of the company.

Blends of PHB/PEG: obtention of matrices for use as controlled drug release systems; Obtencao de blendas de PHB/PEG para matrizes de sistemas micro e nanoestruturados visando aplicacao em liberacao controlada de farmacos

Energy Technology Data Exchange (ETDEWEB)

Catoni, S.E.M.; Gomes, C.A.T.; Trindade, K.N.S.; Schneider, A.L.S.; Pezzin, A.P.T., E-mail: sara.elisamoreira@hotmail.co [Universidade da Regiao de Joinville (UNIVILLE), SC (Brazil); Soldi, V. [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil)

2010-07-01

Different materials have been used in the development of micro-and nanostructured systems for drug release. In general, poly(3-hydroxybutyrate) (PHB) matrixes have high crystallinity degree, justifying its slow degradation. This feature makes the attack of enzymes more difficult. Thus, the surface modification with hydrophilic polymers such as poly(ethylene glycol) (PEG) has been investigated in order to obtain particles which are not recognized and captured by phagocytic cells after in vivo administration, staying for a longer in the systemic circulation. In this work, PHB/PEG films were prepared by casting in different proportions and characterized by XRD, DSC, SEM, GPC and TGA. The films presented high crystallinity degree and showed uniformity, except the 50/50 composition which showed the presence of two phases. The results revealed that increasing percentage of PEG, the Tm of PHB was decreased, the thermal stability was dramatically decreased and molecular weight of the samples was lower. (author)

Evaluation of the effects resulting from the application of magnetic fields on the properties of crude oils and paraffins; Avaliacao da influencia da aplicacao de campos magneticos sobre as propriedades de petroleo e parafinas

Energy Technology Data Exchange (ETDEWEB)

Vieira, Lenise Couto; Rocha, Nelson de Oliveira; Dittz, Carlos Henrique da Silva [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Setor de Tecnologia de Processamento e Transporte

2000-03-01

In petroleum industry the phenomenon of build-up of organic deposits, basically of paraffinic nature, into surface equipment, flow lines and columns has been one of the greatest problems concerning the production and transfer of crude oils, leading to significant and increasing losses in production. The approach through the application of magnetic field is a novel technique, neither explained nor exploited altogether, not one that turns out to be a simple preventive solution for the problem requiring low investment and showing expressive benefits, provided its effectiveness is confirmed. The main results of laboratory test where the effects of application of magnetic fields on the properties of two crude oil types, one mixture of paraffins and two reference solution were evaluated are presented herein, and this paper also approaches the influence of process variables (Magnetization temperature, exposure time and magnetic field density) on the efficiency of this process of treatment. (author)

Application of gamma irradiation for incorporation of rubber powder in the formulations of EPDM and natural rubber; Aplicacao da radiacao gama para incorporacao do po de borracha em formulacoes de borracha natural e EPDM

Energy Technology Data Exchange (ETDEWEB)

Kiyan, Ludmila Y.P.; Parra, Duclerc Fernandes; Lugao, Ademar Benevolo, E-mail: ludmilapozzo@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP/CQMA), Sao Paulo, SP (Brazil). Centro de Quimica e Meio Ambiente

2013-07-01

The objective of this work was to study the behavior of the recycling of rubber burrs in form of powder, of the rubber industry from EPDM rubber powder and natural rubber with SBR. The rubber powder was irradiated and reused in rubber artifacts formulations for classical vulcanization. The processed material was irradiated using a {sup 60}Co source in doses of 50, 100, 150 and 200 kGy and a dose rate of 5 kGy s-1 at room temperature. The radiation created devulcanization active sites for subsequent integration of the material (rubber powder) in formulations of commercial use. The processes were compared and their products characterized by analytical methods of the physical properties such as strength and elongation. Satisfactory results were found, noting a major spin-off of EPDM chain demonstrated by increased elongation.

Preparation of gas diffusion layers for PEMFC fuel cells using carbon fibers; Elaboracao de uma camada de difusao de gas a partir de fibras de carbono para aplicacao em celulas combustiveis do tipo PEMFC

Energy Technology Data Exchange (ETDEWEB)

Santos, J.N.; Kunsti, S.R.; Malfatti, C.F. [Universidade Federal do Rio Grande do Sul - Departamento de Metalurgia (PPGEM) - Laboratorio de Pesquisa em Corrosao (LAPEC), Porto Alegre, RS (Brazil); Vargas, J.V.C. [Universidade Federal do Parana - Departamento de Engenharia Mecanica, PR (Brazil); Amico, S.C. [Universidade Federal do Rio Grande do Sul - Departamento de Materiais, RS (Brazil)

2010-07-01

The electrode/membrane system, called MEA, is the fundamental unit of a PEMFC (proton exchange membrane fuel cell). Within the MEA, the gas diffusion layer (GDL) is the bridge between the flow field and the catalyst layer. One of the important elements in a GDL is the substrate, typically a carbon cloth or paper, that has to be an excellent electrical conductor and show mechanical strength along with thermal and chemical stability. In this work, GDLs were produced from a suspension containing short carbon fibers in water-based polyurethane and poly(vinyl alcohol) (PVA) resins with appropriate characteristics to be used in low temperature fuel cells. The obtained GDL was characterized regarding its wettability, electrical conductivity and morphological aspects, evaluated by SEM. (author)

Partner's interest conflict analysis in distribution of natural gas: a game theory approach; Analise de conflitos de interesse na distribuicao de gas natural em areas urbanas: uma aplicacao da teoria dos jogos

Energy Technology Data Exchange (ETDEWEB)

Prata, Bruno de Athayde; Arruda, Joao Bosco Furtado [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Nucleo de Pesquisa em Logistica, Transporte e Desenvolvimento

2004-07-01

The use of Natural Gas is nowadays increasing in Brazilian scene and this fact shows the necessity of effective planning tasks in that sector. In the case of Natural Gas Vehicular (NGV) distribution one can face problems of actor's (distributor, retailers, customers and non-users) point of view conflicts and fuel stations expand in most Brazilian urban areas in an uncontrolled way, despising counties regulation on land use. This paper reports a study using a model based in Game Theory concepts to determine some key-variables as the number of fuel stations which must deliver NGV in a given study area. Although some information could not be available the results of simulation shows the usefulness of using such an approach to give solutions to distribution questions in NGV sector. The model was applied to the case of a district in Fortaleza city which is the study area of a project entitled Projeto GASLOG presently on process under the sponsoring of Brazilian Government, PETROBRAS and Brazilian GasEnergy Research Network. (author)

Application of genetic algorithms to the maintenance scheduling optimization in a nuclear system basing on reliability; Aplicacao de algoritmos geneticos na otimizacao da politica de manutencoes preventivas de um sistema nuclear centrada em confiabilidade

Energy Technology Data Exchange (ETDEWEB)

Lapa, Celso M. Franklin; Pereira, Claudio M.N.A.; Mol, Antonio C. de Abreu [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil)

1999-07-01

This paper presents a solution based on genetic algorithm and probabilistic safety analysis that can be applied in the optimization of the preventive maintenance politic of nuclear power plant safety systems. The goal of this approach is to improve the average availability of the system through the optimization of the preventive maintenance scheduling politic. The auxiliary feed water system of a two loops pressurized water reactor is used as a sample case, in order to demonstrate the effectiveness of the proposed method. The results, when compared to those obtained by some standard maintenance politics, reveal quantitative gains and operational safety levels. (author)

Optical fibre-lightning arrester cable appliances. Its repercussion in concrete unconventional power transmission lines projects; Aplicacao de cabo para-raios composto com fibra optica. Sua repercursao em projetos de LT`s concreto nao convencionais

Energy Technology Data Exchange (ETDEWEB)

Haddad, Ramon Sade [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil)

1993-12-31

With the adoption of lightning rod cables made of Optical Fibre, (in systems over Europe, Japan and North America), these became very popular in Countries capable of installing the system. The Brazilian electrical party was then challenged by a new technological experience: the lightning rod cable for lines of transmission has specific characteristics. The particularity of the electrical system in Brazil in relation to the diversity of the parameters involved, and the necessity to clarifying the concepts, take us to new strategies in planning and measuring our Power Transmission Lines 4 refs., 1 tab.

Prediction of the thermal expansion coefficients of bio diesels from several sources through the application of linear regression; Predicao dos coeficientes de expansao termica de biodieseis de diversas origens atraves da aplicacao da regressa linear

Energy Technology Data Exchange (ETDEWEB)

Canciam, Cesar Augusto [Universidade Tecnologica Federal do Parana (UTFPR), Campus Ponta Grossa, PR (Brazil)], e-mail: canciam@utfpr.edu.br

2012-07-01

When evaluating the consumption of bio fuels, the knowledge of the density is of great importance for rectify the effect of temperature. The thermal expansion coefficient is a thermodynamic property that provides a measure of the density variation in response to temperature variation, keeping the pressure constant. This study aimed to predict the thermal expansion coefficients of ethyl bio diesels from castor beans, soybeans, sunflower seeds and Mabea fistulifera Mart. oils and of methyl bio diesels from soybeans, sunflower seeds, souari nut, cotton, coconut, castor beans and palm oils, from beef tallow, chicken fat and hydrogenated vegetable fat residual. For this purpose, there was a linear regression analysis of the density of each bio diesel a function of temperature. These data were obtained from other works. The thermal expansion coefficients for bio diesels are between 6.3729x{sup 10-4} and 1.0410x10{sup -3} degree C-1. In all the cases, the correlation coefficients were over 0.99. (author)

Rationalization of water reservoirs operation reduces energy cost with the application of period- and season-dependent tariffs; Racionalizacao da operacao de pocos associada a reservacao reduz custo de energia com aplicacao de tarifa horo-sazonal

Energy Technology Data Exchange (ETDEWEB)

Cassiano Filho, Almiro; Orsati, Walter; Bianchi Neto, Cesar [Companhia de Saneamento Basico do Estado de Sao Paulo (SABESP), SP (Brazil)

1994-12-31

It is presented the utilization of differentiated tariffs for water supply by the Brazilian utility SABESP (Companhia de Saneamento Basico do Estado de Sao Paulo) as a mean to save electric power 3 refs., 2 tabs.

Use of isotopologues as natural tracers of ground water application to Engenho Nogueira watershed, UFMG campus, Brazil; Uso de isotopologos como tracadores naturais das aguas subterraneas: aplicacao a bacia do corrego Engenho Nogueira, campus UFMG

Energy Technology Data Exchange (ETDEWEB)

Aguiar, Raquel Pazzini Scarpelli de

2015-07-01

Isotope Ratio Mass Spectrometry is the ideal method to determine with high precision the ratio of stable isotopes of light elements. Due to this fact, it is used in environmental research, especially in hydrological studies, avoiding the need of injection. This work implanted a method for analysis of water isotopes ({sup 18}O and {sup 2}H) and validated the method for the measurement of δ{sup 18}O, in the Laboratory of Isotope Ratio Mass Spectrometry of the Center for Development of Nuclear Technology. The performance of the method was evaluated according to the following criteria: stability, linearity, precision, accuracy and robustness. This method was applied to studies of groundwater in the watershed of the Engenho Nogueira Creek, located at the Federal University of Minas Gerais (UFMG) campus, in the northern region of the city of Belo Horizonte, Brazil. The watershed of the Engenho Nogueira Creek has been studied in several occasions in recent years for different purposes; however, the use of natural isotopes of water had never been applied to these studies. This technique can expand the diversity of data on the local aquifer, helping to fill gaps in its understanding, besides, it can confirm data previously obtained. The expansion of the academic and administrative units of the UFMG campus since 2000 implies in an incremented importance of the management of the local since the demand for water grows each year. (author)

Energy choice for textile industry: application of multi-criteria methods to the case of Ceara state (Brazil); Escolha de insumo energetico para o setor da industria textil: aplicacao de modelo multicriterio ao caso do Ceara

Energy Technology Data Exchange (ETDEWEB)

Rabelo, Clarice A.C.; Arruda, Joao Bosco F [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Nucleo de Pesquisa em Logistica, Transportes e Desenvolvimento

2004-07-01

Brazilian energy sector has faced a series of transformations that have influence on national industry. The trial of economy globalization and the new energy sources Also available and output techniques created a more competitive business environment, where not only financial aspects are considered in industrial practices. In such environment, the industry seek for more efficient production techniques and greater importance given to environmental issues are responsible for making the decision processes associated to industrial activities more complex. In this context, the energy utilized by industry represents an important aspect of business course, justified by governmental concerns on attending all existing thermal energy demand. This paper aim is to support the decision process concerned to the choice of the best energy source to be applied in the industry. In order to reach such goal, a decision model was built based on multi criteria techniques applied to the case of textile industry in Ceara State. This sector is also one of the biggest natural gas consumers in Ceara, which has influenced on its choice in order to attend to a second goal of this paper: to focus the natural gas applications and support a greater insertion of this fuel in the market. (author)

Application of operational contingency analysis as a tool to reduce loss in the energy and utility area; Aplicacao da analise de contingencia operacional como ferramenta de minimizacao de perdas na area de energia e utilidades

Energy Technology Data Exchange (ETDEWEB)

Santos, Adriano Francisco dos; Alvarenga, Zenilton Galhano; Grijo, Fabio Becalli [ArcelorMittal Tubarao, ES (Brazil). Dept. de Producao de Gusa e Energia

2009-11-01

All new implementation of activities and equipment needs special attention regarding programming, preparation and operations performance, service and necessary interventions in order to achieve success considering operation, safety and environment. The real challenge in order to realize this change is to guarantee for the costumers the minimum interference, once it is performed on an operational routine basis. The energy distribution area from ArcelorMittal Tubarao (IGC-D) has a very important operational tool to succeed on this task: the operational contingency analysis. The objective of this paper is showing how the operational contingency analysis has been used as a tool to help IGC-D operation on preventing interruptions on supplying the internal costumers as well as keeping the maximum efficiency at the plant. (author)

Study of the spheronization process of glass particles by the gravitational falling process for internal selective radiotherapy; Estudo do processo de esferolizacao por queda gravitacional de particulas vitreas visando a aplicacao em radioterapia interna seletiva

Energy Technology Data Exchange (ETDEWEB)

Barros Filho, E.C.; Martinelli, J.R., E-mail: eraldo.filho@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), SP (Brazil); Sene, F.F. [Centro Tecnologico da Marinha em Sao Paulo (CTMS), Sao Paulo, SP (Brazil)

2011-07-01

The internal selective radiotherapy is an alternative to treat hepatocellular carcinoma. Glass microspheres containing β{sup -} emitter radionuclide are introduced in the liver, and they are housed preferentially in the region where the cancer cells are located. The microspheres are trapped in the arterioles which feed the tumors, and the β{sup -} particles annihilate the cancer cells. The glass particles must be spherical to avoid unnecessary bleeding, and the particle size must be restricted to a range which optimizes the blocking effect and avoid the migration to other parts of the human body. The particle size distribution of microspheres is not easily predicted since the variation of the aspect ratio and the presence of agglomerates can influence the resulting particle size distribution. In the present work, the spheronization process to obtain microspheres from irregular shape glass particles with suitable diameter and shape for radiotherapy treatment is studied. (author)

Synthesis and ceramic processing of zirconia alumina composites for application as solid oxide fuel cell electrolytes; Sintese e processamento de compositos de zirconia-alumina para aplicacao como eletrolito em celulas a combustivel de oxido solido

Energy Technology Data Exchange (ETDEWEB)

Garcia, Rafael Henrique Lazzari

2007-07-01

The global warmness and the necessity to obtain clean energy from alternative methods than petroleum raises the importance of developing cleaner and more efficient systems of energy generation, among then, the solid oxide fuel cell (SOFC). Cubic stabilized zirconia (CSZ) has been the most studied material as electrolyte in SOFC, due to its ionic conductivity and great stability at operation conditions. However, its low fracture toughness difficulties its application as a thin layer, what could lead to an improvement of cell efficiency. In this sense, the alumina addition in CSZ forms a composite, which can shift its mechanical properties, without compromising its electrical properties. In this work, coprecipitation synthesis route and ceramic processing of zirconia-alumina composites were studied, in order to establish optimum conditions to attain high density, homogeneous microstructure, and better mechanical properties than CSZ, without compromising ionic conductivity. For this purpose, composites containing up to 40 wt % of alumina, in a 9 mol % yttria-stabilized zirconia (9Y-CSZ) matrix were evaluated. In order to optimize the synthesis of the composites, a preliminary study of powder obtaining and processing were carried out, at compositions containing 20 wt % of alumina, in 9Y-CSZ. The ceramic powders were characterized by helium picnometry, X-ray diffraction, scanning electronic microscopy, transmission electronic microscopy, thermogravimetry, differential scanning calorimetry, granulometry by laser diffraction and gas adsorption (BET). The characterization of sinterized compacts were performed by X-ray diffraction, scanning electron microscopy, optical microscopy, density measurements, Vickers indentation and impedance spectroscopy. The obtained results show that the alumina addition, in the 9Y-CSZ matrix powders, raises the specific surface area, promotes deagglomeration of powders and elevates the oxides crystallization temperature, requiring higher energetic thermal treatments to attain high densities. In relation to the sintered products, it was confirmed the excellent homogeneity and crystallinity of microstructure provided by the chosen route, the restriction of grain growth by alumina addition, raise of hardness and fracture toughness, and higher ionic conductivity, even tough a lower bulk conductivity. These results indicate that the addition of 5 wt % alumina in CSZ matrix allows the application of this material as solid oxide fuel cell electrolytes, due to its better fracture toughness and ionic conductivity, compared to yttria-stabilized cubic zirconia ceramics. (author)

Application of heterogeneous photocatalysis solar and artificial for removal of ammonia nitrogen and total phosphorus in sanitary waste water; Aplicacao da fotocatalise heterogenea solar na remocao de nitrogenio amoniacal e fosforo total em esgoto sanitario

Energy Technology Data Exchange (ETDEWEB)

Francisco, Adriana Ribeiro; Paterniani, Jose Euclides Stipp [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Agricola], E-mail: z_drica@yahoo.com.br; Kuwakino, Adriana Yuri [Universidade Estadual de Campinas (UNICAMP), Limeira, SP (Brazil). Fac. de Tecnologia

2010-07-01

The advanced oxidative processes (AOP) contribute or to polishing a plenty of effluent treatment, or improvement at any stage of treatment, being heterogeneous photocatalysis the most used among AOP. This study aimed to compare the heterogeneous photocatalysis in solar and artificial wastewater treatment according to the removal of ammonia nitrogen and phosphorus. The photocatalytic reactor using titanium dioxide (TiO{sub 2}) as semiconductor photocatalytic process. The heterogeneous photocatalysis using solar UV consisted material of PET bottles and the sample was added TiO{sub 2} in constant aeration for a period of 360 minutes. In the case of reactor artificial UV light protected by a quartz tube, the process was made in a Pyrex glass reactor, where the sample was undergoing 180 minutes of aeration. The photocatalytic tests for removal of ammonia nitrogen showed more favorable in the photocatalysis of artificial UV than the solar, coming achieve average efficiency of 51% and 32%, respectively. In the case of phosphorus, the situation was reversed, the solar UV photocatalytic average efficiency reached 51% and artificial UV 32 %. (author)

The investment of royalties on municipality of Presidente Kennedy and the diversification of production; A aplicacao dos recursos advindos dos 'royalties' do petroleo no municipio de Presidente Kennedy e a diversificacao da producao

Energy Technology Data Exchange (ETDEWEB)

Zardo, Alessandro; Zardo, Bruno [Universidade de Vila Velha, MG (Brazil). Relacoes Internacionais

2008-07-01

After the promulgation of the Law number 9.478/97 and the magnifying of oil extraction on Field Jubarte, a significant increase of the Royalties and Special Participations could be noticed on the municipality of Presidente Kennedy. The aim of the present article is to to carry through a study about the importance of such resource on the municipality's economy and to analyse how does the shares were reinvested with the objective of minimizing the local economy's dependence from oil activities. The method adopted involved data research and analysis referent to the royalties and special participations values, as well as information regarding work market's diversification. What is persuited is to show that the amounts proceeding from the oil activities ends up responsible for financing government's machine, what disables inter-generation's justice and sector's diversification. (author)

Application of organic facies in sedimentological-stratigraphical model of the Oligo-Miocene and Miocene of the Campos Basin; Aplicacao da faciologia organica no modelo sedimentologico-estratigrafico do Oligo-Mioceno e Mioceno da Bacia de Campos

Energy Technology Data Exchange (ETDEWEB)

Mendonca Filho, Joao Graciano; Mendonca, Joalice de Oliveira; Oliveira, Antonio Donizeti de; Torres, Jaqueline [Universidade Federal do Rio de Janeiro (UFRJ). Centro de Ciencias Exatas e da Natureza. Inst. de Geociencias (Brazil)], e-mails: graciano@geologia.ufrj.br, donizeti@lafo.geologia.ufrj.br, joalice@lafo.geologia.ufrj.br, jaqueline@lafo.geologia.ufrj.br; Menezes, Taissa Rego [Centro de Pesquisas da Petrobras (CENPES), RJ (Brazil). P e D em Geociencias. Gerencia de Geoquimica], e-mail: taissamenezes@petrobras.com.br; Santos, Viviane Sampaio Santiago dos; Arienti, Luci Maria [Centro de Pesquisas da Petrobras (CENPES), RJ (Brazil). P e D em Geociencias. Gerencia de Sedimentologia e Estratigrafia], e-mails: vsss@petrobras.com.br, arienti@petrobras.com.br

2010-05-15

This study integrates palynofacies analyses and the sedimentological and stratigraphic model of the Oligo-Miocene/Miocene siliciclastic deposits from the stratigraphic interval of the shallow continental platform up to the slope/basin of the Oligo-Miocene/ Miocene of the Campos Basin proposed. The main objective of the palynofacies study was to characterize the particulate sedimentary organic matter to obtain information about the proximal-distal relationship and the sedimentary organic matter preservation and depositional environmental conditions. The 158 core samples collected in 29 wells of the 9 oil production fields (Albacora, Barracuda, Marlim Sul, Marlim, Voador, Marlim Leste, Moreia and Albacora Leste), were studied. This technique provides information about the proximal-distal relationship and the paleoenvironmental conditions of deposition and preservation of sedimentary organic matter, to facilitate the evaluation and comparisons between the associations of particulate organic components. Thus, the palynofacies technique can be used as another tool in the characterization of depositional systems, based on the spatial and temporal distribution of sedimentary intervals. In general the palynofacies assemblages showed the predominance of the Phytoclast Group (terrestrial derived organic matter) at various degradation stages due to the selective preservation process diagnosed in the studied samples. Some samples, revealed high dinocysts percentages indicative of transgressive depositional conditions. From the obtained data, it was possible to characterize the stratigraphic sequences according to the distribution of particulate organic content (e.g. influence of fluvio-deltaic systems, oxygen system, regressive-transgressive tendencies of each sequence). Additional analyses of Total Organic Carbon (% wt) showed the control of the particulate components from the Phytoclast Group on the TOC (% wt) content, suggesting that the relative sea-level variation curves can be drawn inversely to the TOC content variation curves along the sequences, since siliciclastic progradation always presents a correlation with the absolute abundance of the terrestrial organic matter. (author)

Automatic control system for measuring currents produced by ionization chambers; Automatizacao de um sistema de medidas de correntes produzidas por camaras de ionizacao e aplicacao na calibracao do {sup 18}F e {sup 153}Sm

Energy Technology Data Exchange (ETDEWEB)

Brancaccio, Franco

2002-07-01

Ionization Chambers in current mode operation are usually used in Nuclear Metrology. Activity measurements are quickly performed by Ionization Chambers, with very good precision. For this purpose measurements of very low ionization currents, carried out by high quality instrumentation, are required. Usually, electrometers perform the current integration method under command of signals from an automation system, in order to reduce the measurement uncertainties. Among the measurement systems at the Laboratorio de Metrologia Nuclear (LMN) of IPEN, there are two ionization chamber systems. In the present work, an automation system developed for current integration measurements is described. This automation system is composed by software (graphic interface and control) and an electronic module connected to a microcomputer, by means of a commercial data acquisition card. Several test measurements were performed in order to determine the intrinsic uncertainty, linearity and stability of the system. Using calibrated radioactive solutions, the IG12/A20 chamber calibration factors for {sup 18}F and {sup 153}Sm were obtained, making possible to determine activities of these radionuclides. (author)

Microstructural characterization of composite cobaltite and lanthanum-based ceria for use as fuel cell cathodes; Caracterizacao microestrutural de compositos a base de cobaltita de lantanio e ceria para aplicacao como catodos de celulas a combustivel

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, E.R.T.; Nascimento, R.M.; Miranda, A.C. de; Lima, A.M. de, E-mail: erickssonrtr@gmail.com [Universidade Federal do Rio Grande do Norte (UFRN), RN (Brazil); Macedo, D.A. [Universidade Federal da Paraiba (UFPB), PB (brazil)

2016-07-01

Fuel cells are devices that convert chemical energy into electricity via redox reactions. In this work, the lanthanum cobaltite doped with strontium and iron (La{sub 0,6}Sr{sub 0,4}Co{sub 0,2}Fe{sub 0,8}O{sub 3} - LSCF) a traditional cathodes material of the fuel cell was mixed with an electrolyte material (composite) to the base ceria doped with gadolinia and a eutectic mixture of lithium carbonates and sodium (CGO-NLC). The powders of LSCF and CGO-NLC were obtained by the citrate method and mixed to obtain a composite cathode. Samples obtained by uniaxial pressure between 5 and 10 MPa were sintered at 1100°C and investigated by X-ray diffraction, scanning electron microscopy and micro hardness test. A symmetric cell cathode / electrolyte / cathode, obtained by co-pressing and co-sintering was investigated by electron microscopy. The results indicated that the composite is chemically stable up to the sintering temperature used. The hardness ranged between 51 and 227 HV. (author)

Effect of substitutional element in the microstructure and hardness of Ti-Zr system alloys used as biomaterials; Efeito do elemento substitucional na microestrutura e dureza de ligas do sistema Ti-Zr para aplicacao como biomaterial

Energy Technology Data Exchange (ETDEWEB)

Correa, D.R.N.; Vicente, F.B.; Grandini, C.R., E-mail: diegornc@fc.unesp.b [Universidade Estadual Paulista (UNESP), Bauru, SP (Brazil). Lab. de Anelasticidade e Biomateriais

2010-07-01

New titanium alloys had been developed with the aim of obtaining materials with improved properties for application as biomaterial, and alloys of the Ti-Zr system are among those most promising. The objective of this study is to analyze the influence of the zirconium concentration on microstructure and hardness of the Ti-5Zr, Ti-10Zr and Ti-15Zr alloys. After arc-melting melting, the samples were analyzed by chemical and gas composition, and characterized by density measurements, optical microscopy, x-ray diffraction and hardness. The results showed a microstructure formed by alpha phase (hexagonal close-packed structure) and increased of hardness. (author)

Gamma-ray and electrical resistivity measurements in soil with application of carbonatite and agricultural fertilizers in Distrito Federal; Radiacao gama e resistividade eletrica em solo com aplicacao de carbonatito e fertilizantes agricolas no Distrito Federal

Energy Technology Data Exchange (ETDEWEB)

Nascimento, Carlos Tadeu Carvalho do; Gaspar, Jose Carlos; Pires, Augusto Cesar Bittencourt, E-mail: carlostadeu@unb.br, E-mail: gasp@unb.br, E-mail: acbpires@unb.br [Instituto de Geociencias, Universidade de Brasilia, DF (Brazil); Ferreira, Francisco Jose Fonseca, E-mail: francisco.ferreira@ufpr.br [Departamento de Geologia, Universidade Federal do Parana, Curitiba, PR (Brazil); Andrade, Leide Rovenia Miranda de, E-mail: leide@cpac.embrapa.br [Empresa Brasileira de Pesquisa Agropecuaria, Centro de Pesquisa Agropecuaria dos Cerrados, Planaltina, DF (Brazil)

2008-01-15

EMBRAPA (Empresa Brasileira de Pesquisa Agropecuaria) and Brasilia University developed a research project about the viability of carbonatite rock as agricultural fertilizer. As an initial experiment, several mixtures of carbonatite, limestone, phosphorous and potassium compounds were added as fertilizers in an oxisol area (red-latosol, according with Brazilian System of Soil Classification), in Distrito Federal, central Brazil. The experiment area was divided in 56 plots (4 x 7m) and each plot received a fertilizer mixture. The purpose of this work was to verify if the addition of fertilizer mixture to the soil modified its radiometric and resistivity properties and if it is possible to identify this change. Gamma-ray and electrical resistivity measurements were obtained in an experimental area and in a natural savannah type vegetation area. The results showed that the fertilizer addition modified soil natural properties causing a small increase in K, U, Th levels and decreasing ten times electrical resistivity. A low contrast of radiation was observed between plots, and then it was not possible to differentiate the several treatments in base of gamma-ray measurements. Electrical resistivity was efficient to identify three groups of plots related to mixtures characteristics, respectively with phosphorous, potassium and limestone / carbonatite predominance. (author)

Preliminary evaluation of the utilization of biopiles technology to the bioremediation of the soil of Guamare/RN (Brazil); Avaliacao preliminar da aplicacao da tecnologia de biopilhas para a biorremediacao do solo de Guamare/RN (Brasil)

Energy Technology Data Exchange (ETDEWEB)

Silva, Edmilson P.; Macedo, Gorete R.; Duarte, Marcia M.L. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Engenharia Quimica; Costa, Alex S.S. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

2004-07-01

The aim of this work was to evaluate the use of biopiles to the bioremediation of the soil of Stabilization Station of Guamare-RN-Brazil. The evaluation was performed by the characterization of the soil, tests of biodegradation in laboratory scale and by the use of a complete 2{sup 3} factorial design with triplicate at the central point. The input variables were: Nitrogen concentration; diesel-oil concentration; and inoculum concentration. The response variable was the percentage gravimetric loss of organic matter. Statistical analyses of the main factors and their interactions on the response variable were performed using contour curves and Pareto obtained from the software STATISTICA for Windows, Release 5.5. The results showed that biopiles technology can be used to remediate eventual contaminated areas in that region. (author)

Study of dose modulation system and its application in the process of optimization and in multi cuts systems; Estudo do sistema de modulacao de doses e sua aplicacao no processo de otimizacao e em sistemas multicortes

Energy Technology Data Exchange (ETDEWEB)

Delduck, R.S.; Silveira, V.C.; Kodlulovich, S., E-mail: simone@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Oliveira, L.C. [Universidade Federal do Rio de Janeiro (CT/UFRJ), RJ (Brazil). Centro de Tecnologia

2011-07-01

Radiation protection has been more important over the years.The doses in routine examinations of the abdomen, using dose modulation system, increased significantly. As the computed tomography is a technique of high-dose radiation when compared with other imaging techniques.This project was developed in a clinic in Rio de Janeiro. The scanner was Philips Brilliance 64.The systems of automatic control exposure were evaluated, taking into account the levels of noise factors and the techniques used in routine examinations of the abdomen. In tests, the patient doses were compared to reference dose of Impact, the information in the console. Also was evaluate the different results using the dosimetric phantoms oval and elliptical. The values obtained for the weighted indices of kerma, kerma product volume and product kerma scan showed all was below the same when done with dose modulation. (author)

Evaluation of the potential application of 2-acetylpyridine N4- phenyl thiosemicarbazones derivatives for cancer therapy and diagnosis; Avaliacao da potencial aplicacao de derivados de 2-acetilpiridina N-4 fenil tiossemicarbazonas em terapia e diagnostico oncologico

Energy Technology Data Exchange (ETDEWEB)

Soares, Marcella Araugio

2013-08-01

Despite the wide range of antineoplastic agents available, resistance of some types of cancer and toxicity to normal cells have been identified as the main causes of treatment failure and death. The lack of early and precise diagnosis is also responsible for reducing survival of cancer patients. In this context, the development of substances with low toxicity and therapeutic potential and/or diagnosis purpose, is the major tool in an attempt to increase the survival of patients and assure the safety and efficacy of treatment. Thiosemicarbazones (TSC) are a class of synthetic compounds that have several biological activities, including antitumor. Although several studies have shown the great potential of TSC as therapeutic and / or diagnostic agents, different chemical modifications performed on this class of molecules indicate new possibilities for applications and still require further studies. The objective of this study was to evaluate the potential applicability of 2-acetylpyridine N-4-phenyl thiosemicarbazones derivatives for cancer therapy and diagnosis. The results showed that all 13 TSC tested were cytotoxic to breast and glioblastoma tumor cell lines, presenting higher in vitro antitumor activity than etoposide, an antineoplastic and inhibitor of topoisomerase II frequently used for cancer therapy. The TSC that have halogen or nitro on ortho position showed higher antitumor activity in vitro than their isomers with halogen or nitro on meta or para position of the phenyl group. H2Ac4oFPh and H2Ac4oClPh compounds showed the highest antitumor activity among all tested compounds, with IC{sub 50} in nanomolar order. These TSC induced cell death by apoptosis and oxidative stress was responsible, at least in part, for this type of cell death. The 5 mg.kg{sup -1} H2Ac4oFPh dose, administered s.c., for 4 consecutive days, did not induce important toxicity; however, the same treatment protocol was not effective for tumor growth reduction in an animal model of brain tumor. Radioactive probes of H2Ac4oFPh were synthesized using {sup 111}In or {sup 67}Ga as radiotracers, with satisfactory specific activity and radiochemical purity. H2Ac4oFPh-{sup 111}In was more useful than H2Ac4oFPh-{sup 67}Ga, with higher specific activity, better chemical purity, better in vitro stability, higher distribution volume, faster blood clearance and, therefore, was considered the most promising for application in molecular imaging studies. H2Ac4oFPh-{sup 111}In also showed high lipophilicity and was internalized by glioblastoma cells in vitro. H2Ac4oFPh-{sup 111}In showed significative tumor uptake in vivo, however, the high abdominal uptake and high background did not allow a good visualization of tumor in imaging studies. Unlike intravenous administration, intratumoral administration allowed greater diffusion and retention of H2Ac4oFPh-{sup 111}In in the tumor site and significantly reduced the activity accumulated in the organs. These results encourage new experiments to be performed in order to promote the complexation of H2Ac4oFPh with particle emitters, such as yttrium-90, to evaluate its application in local radioisotopic therapy for glioblastoma multiforme. (author)

Preparation, characterization and evaluation of electrocatalysts supported on functionalized carbon black for polymer exchange membrane fuel cell applications; Preparacao, caracterizacao e avaliacao de eletrocatalisadores suportados em carbono funcionalizado para aplicacao em celulas a combustivel tipo PEM

Energy Technology Data Exchange (ETDEWEB)

Carmo, Marcelo do

2008-12-18

The fuel cell technology associated with the growing exigency of low environmental impact energy became prosperous in the world energy scenery. The fuel cell is basically a device that converts directly the chemical energy of a fuel into electrical and thermal energy with a continuous operation by the constant feed of a fuel. Especially, the carbon black Vulcan XC72 is usually employed as an electro catalyst support, and some factors as an accessible and high surface area in order to get maximum particles dispersion, pore size, adequate pore distribution and the presence of functional groups in the carbon black surface are considered fundamental characteristics for an innovative materials development. However, the Vulcan XC72 still reveals insufficient conditions for these purposes. This study consists in the preparation and in the physical chemical characterization of functionalized carbon black by hydrogen peroxide and by polymeric chains with proton conduction properties, and its posterior utilization as electro catalyst support for PEMFC and DMFC application. After the carbon functionalization, an improvement in the carbon black dispersion in water media was observed, a beneficial effect for electro catalyst preparation. It was also observed, that the functional groups and the polymeric chains worked as stabilizers in the particle growing, producing much more homogeneous electrocatalysts, exhibiting smaller average particle size. Especially, in the case of polymeric chains functionalization, a decrease in the ohmic drop was observed for this system, attributed to an improvement in the proton transference. (author)

Synthesis and characterization of Pt-Sn-Ni alloys to application as catalysts for direct ethanol fuel cells; Sintese e caracterizacao de ligas de Pt-Sn-Ni para aplicacao como caztalisadores em celulas a combustivel do tipo DEFC

Energy Technology Data Exchange (ETDEWEB)

Silva, E.L. da; Correa, P.S.; Oliveira, E.L. de; Takimi, A.S.; Malfatti, C.F., E-mail: celia.malfatti@ufrgs.b [Universidade Federal do Rio Grande do Sul (LAPEC/UFRGS), Porto Alegre, RS (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica. Lab. de Pesquisa em Corrosao; Radtke, C. [Universidade Federal do Rio Grande do Sul (IQ/UFRGS), Porto Alegre, RS (Brazil). Inst. de Quimica

2010-07-01

Direct ethanol fuel cells (DEFCs) have been the focus of recent research due its application in mobile energy sources. In order to obtain the maximum efficiency from these systems, it is necessary the total ethanol oxidation, which implies in C-C bond break. Different catalysts described in literature are employed with this intent. This work consists in studying PtSnNi catalysts supported on carbon Vulcan XC72R, to application in DEFCs. Thus, it was used the impregnation/reduction method, varying the atomic proportion among Pt, Sn and Ni. The alloys were characterized by X-Ray Diffraction, Cyclic Voltammetry and Transmission Microscopy. Preliminary results show that predominant structure on the catalysts is the face centered cubic platinum and the densities currents are dependent on the platinum amount. (author)

Application of different methodologies in the preparation of organic matrices for determination of trace elements by differential pulse anodic stripping voltammetry; Aplicacao de diferentes metodologias na preparacao de matrizes organicas para a determinacao voltametrica de elementos traco

Energy Technology Data Exchange (ETDEWEB)

Sisti, Cristina

2001-07-01

The determination of trace elements in food samples is of great importance for the human health, considering the factors of essentiality and toxicity. On the other hand, the chemical analysis is largely affected for the steps of sample preparation; laboratory contamination of the sample and the reagents or still volatilization and losses of the elements. If these parameters are not controlled the achieved precision and accuracy could be low. In this work, the content of zinc, cadmium, lead and copper was determined in adults diet samples collected by duplicate portion technique and bovine liver, applying the differential pulse anodic stripping voltametry - (DP-ASV) technique. In the digestion of the matrices in acid medium, conventional methodologies were used, conductive heating in open recipients and equipment with microwaves source in open and closed vessels. The best procedure was the sample digestion by microwaves, in closed vessels and the other treatments made in controlled atmosphere with hood laminar-airflow class 100. The established methodology was validated with the use of a certified sample as reference (NIST - bovine liver 1577b). (author)

Production and characterization of compounds based on MgB{sub 4}O{sub 7} for application in dosimetry; Producao e caracterizacao de compostos a base de MgB{sub 4}O{sub 7} para aplicacao em dosimetria

Energy Technology Data Exchange (ETDEWEB)

Souza, Luiza Freire de

2016-07-01

Many materials with luminescent properties are used for ionizing radiation dosimetry through the thermoluminescence (TL) and optically stimulated luminescence (OSL) techniques. Detectors based on lithium fluoride (LiF), calcium sulphate (CaSO{sub 4}) and aluminum oxide (Al{sub 2}O{sub 3}), doped or codoped with various elements, are the TL or OSL commercial dosimeters most widely used currently. However, several researches are focused to the development of new TL /OSL materials in intention to enhance the dosimetric properties, in view that no TL/OSL dosimeter has all the ideal characteristics for monitoring the radiation. In this context, magnesium tetraborate (MgB{sub 4}O{sub 7}), which has been presented in the literature as a material for dosimetry TL, was investigated in this work. As there are no reports on the structural characterization of this material or regarding to its applicability on OSL dosimetry, the proposal of the present work was to develop compounds based on MgB{sub 4}O{sub 7}, with different doping, by solid state synthesis. It was made the structural, optical, TL and OSL characterization of the compound to verify it feasibility for application on radiation dosimetry. Initially, it was determined the calcination temperature and time for MgB{sub 4}O{sub 7} formation, with the use of thermal analyses and x ray diffraction. The ideal calcination was found at 900 °C for 7 hours. It were produced , in powder form, the compounds: MgB{sub 4}O{sub 7}, MgB{sub 4}O{sub 7}:Dy, MgB{sub 4}O{sub 7}:Dy,Li, MgB{sub 4}O{sub 7}:Ce, MgB{sub 4}O{sub 7}:Ce,Li, MgB{sub 4}O{sub 7}:Nd and MgB{sub 4}O{sub 7}:Nd,Li. For TL and OSL analyses it were produced pellets sintering at 950 °C for 2 hours. The radioluminescence (RL) analyses of MgB{sub 4}O{sub 7}:Dy and MgB{sub 4}O{sub 7}:Dy,Li shows wavelength emissions at 490, 590, 670 and 760 nm. For MgB{sub 4}O{sub 7}:Ce and MgB{sub 4}O{sub 7}:Ce,Li RL was observed wide emission band in the ultraviolet region. For the MgB{sub 4}O{sub 7}:Nd and MgB{sub 4}O{sub 7}:Nd,Li RL were not observed emission from the ultraviolet to infrared. With the results obtained from the TL characterization, it were also discussed aspects such as: effect of sintering and dopant concentrations in emissions, influence of doping and codoping with Li in MgB{sub 4}O{sub 7} matrix, thermal treatment reuse, TL signal reproducibility, dose response curve , relative sensitivity and it were analyzed the kinetic parameters of the TL emission curves. The OSL analyses of MgB{sub 4}O{sub 7}:Dy,Li,MgB{sub 4}O{sub 7}:Ce,Li and MgB{sub 4}O{sub 7}:Nd,Li indicated that the compounds have high cross section for photoionization to the wavelength emitted by blue LEDs, and from three compounds analyzed the MgB{sub 4}O{sub 7}: Ce,Li showed greater intensity. The partial preheating and partial cleaning methods allowed to elucidate the OSL phenomenology in compounds. (author)

Electrical resistivity of ceramic-metal composite materials in the percolation region: application in crucibles for induction furnaces; Resistividade eletrica de materiais compositos do tipo ceramica-metal na regiao de percolacao: aplicacao em cadinhos para fornos de inducao

Energy Technology Data Exchange (ETDEWEB)

Sene, Frank Ferrer

1997-07-01

Ceramic composite materials were produced by mixing powders of Partially Stabilized (PSZ) with titanium, niobium or nickel, and cristobalite with titanium. Pellets were produced by uniaxially pressing the material followed by cold isostatic pressing and finally sintering at 1600 deg C for 1,5 hours in argon. The metal content was varied in the range of 0-40 volume percent (v/o). Electrical resistivity measurements were performed in the temperature range of 25 - 700 deg C. Samples containing metallic inclusions above 25 v/o show the predominance of electronic type conducting. For samples with metallic inclusion below 25 v/o, a typically ionic conduction behavior has been observed. PSZ-Ti and PSZ-Ni samples containing 25 v/o of metallic inclusions show an insulator - conductor transition in a given temperature range. Cristobalite samples containing 30 v/o of titanium show a conductor - insulator transition also in a specific temperature range. Tests performed in an induction furnace showed that samples containing metallic inclusions above 25 v/o had self-heated when exposed to electro magnetic fields in the range of radio frequency (r.f.) Crucibles of PSZ-Ti were made by slip casting followed by sintering at 1600 deg C for 1.5 hours in argon. These crucibles were exposed to electromagnetic fields in the r.f. range and the maximum temperature reached was 1350 deg C. Microstructure characterization was performed on those materials by X-ray diffraction, EDS, optical and scanning electron microscopy. (author)

Mechanical and electrical evaluation of a dilute aluminium alloy heat treated for application in electrical cables and wires; Avaliacao mecanica e eletrica de uma liga diluida de aluminio tratada termicamente para aplicacao em fios e cabos eletricos

Energy Technology Data Exchange (ETDEWEB)

Freitas, E.S. [Faculdade de Engenharia Mecanica - Unicamp - Campinas, SP (Brazil)], e-mail: manu@fem.unicamp.br; Kamizono, K.A.; Nogueira, P.; Nogueira, A.T.; Quaresma, Jose Maria do Vale [Universidade Federal do Para - UFPA, PA (Brazil)

2010-07-01

With the need to investigate new materials developed and presented to the market of non-ferrous materials and in particular those developed for the transmission and distribution of electricity, we conducted a study on a dilute alloy Al-EC-0, 7% Si, where from his previous characterization and thus knowing their good mechanical and electrical properties, we developed a new aluminum alloy in an attempt to know the properties of the alloy Al-EC-0, 7% Si in the presence of alloying elements, titanium. Being the new alloy under different thermal treatment temperature in order to observe their behavior under such mechanical and electrical conditions. (author)

Application of magnetic nanoparticle MnFe{sub 2}O{sub 4} type as a catalyst in esterification reaction; Aplicacao de nanoparticula magnetica do tipo MnFe{sub 2}O{sub 4} como catalisador em reacao de esterificacao

Energy Technology Data Exchange (ETDEWEB)

Pereira, K.R. de O.; Barros, A.B. de S.; Moura, T.F.B. de; Vilar, E.; Dantas, J.; Costa, A. C. F. de M., E-mail: klebersonric@gmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Laboratorio de Sintese de Materiais Ceramicos

2016-07-01

The interest in obtaining renewable energy arouses the interest of researchers in the development of biofuels to replace conventional fuels. This work aimed to obtain magnetic nanoparticle MnFe{sub 2}O{sub 4} and evaluate their performance as a catalyst in esterification reaction to obtain biodiesel. The sample was synthesized through the combustion reaction and characterized by XRD, SEM and BET. The esterification reaction, the methyl ethyl route was conducted in a high pressure reactor at 180 ° C for 1 hour with oil molar ratio 1:12 alcohol with 2% catalyst. The results indicate the formation of the phase MnFe{sub 2}O{sub 4} and agglomerate in the form of irregular plate, with particles bound strongly to the surface of the agglomerates. The catalytic tests showed that sample was active for the reaction of esterification methyl ethyl route, with conversions of 52% and 48%, respectively. (author)

Application of the Rietveld method in structural analysis of catalysts based on CuO/CeO{sub 2}; Aplicacao do metodo de Rietveld na analise estrutural de catalisadores a base de CuO/CeO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Neiva, L.S.; Ribeiro, M.A.; Bispo, A.; Simoes, A.N.; Gama, L., E-mail: lsoutoneiva@yahoo.com.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Departamento de Engenharia de Materiais

2011-07-01

This work has as aim to synthesize catalysts composed by CuO/CeO{sub 2} by means two distinct methods of synthesis, they are: combustion synthesis and Pechini. The catalysts composed by CuO/CeO{sub 2} were synthesized with CuO in condition of dopant element. The value of the CuO concentration ranged between 0 and 0.5 mol. Has been done a structural analysis related to how the kind of synthesis method used influences over physical characteristic of the catalytic material. The obtained catalysts were characterized by X-ray diffraction with refinement by Rietveld method. According to results, the synthesized catalysts showed crystalline structures formed mostly by CeO{sub 2} phase, as expected, since this is the host matrix for the dopant element. The catalysts obtained by the Pechini method presented structures with a smaller amount of segregated phases formed by CuO, according to the results of the structural analysis. (author)

Application of of artificial neural networks for estimation of soil-plant transfer factor for {sup 137}Cs; Aplicacao de redes neurais artificiais para a previsao de valores do fator de transferencia solo-planta para {sup 137}Cs

Energy Technology Data Exchange (ETDEWEB)

Santos, Anna Karla Gomes dos

2016-07-01

The knowledge of radionuclide behavior in soils is fundamental to calculate the dose due to food ingestion and to evaluate the risks of radioactive exposure of the population. This knowledge associated to the socio-economic characteristics of the affected region will set the radio protective measures to be taken in case of radioactive contamination of rural areas. The soil-plant transfer factor (TF) is the specific parameter value of radiological models to numerically integrate the dynamic processes that occur within the radionuclides in the soil plant system. This measurement, specific to each radionuclide and soil type, is defined ratio between a specific radionuclide activity in the edible part of the plant and its soil activity. However, the absence of linearity between soil concentrations and the measurements in plants indicate the complexity of the transfer process of radionuclide from soil to a plant, making it difficult to forecast the TF ratio in a specific scenario. One of the main radionuclides associated to nuclear accidents impacting rural areas is {sup 137}Cs. This is one of the most worrisome radionuclides because of its physiochemical properties and its chemical similarity with potassium (K) and its extended physical mid-life (t1/2 = 30,17 years) that allows great environmental dispersion, ecological mobility and environmental endurance. Radiological studies related to {sup 137}Cs transfer factor show that pedological parameters that considerably explain the behavior of {sup 137}Cs in soil-plant system are: exchangeable K, clayed minerals, organic matter content and pH in soils. In this work, the computational method of artificial neural network (ANN) was applied to evaluate the possibility to forecast the TF of {sup 137}Cs in cereals, associated to pedological parameters considered potential indicators of its phyto availability: cationic exchange capacity (CEC), exchangeable K and pH. This study demonstrated that the ANN, having only as entry data the pedological parameters pH, CEC and exchangeable K, was capable of estimating TF soil-plant values in cereals for {sup 137}Cs with deviations inferior to 6% in almost 86% of the cases, showing the availability of the ANN use as a tool to predict the soil-plant transfer factor values for {sup 1}3{sup 7}Cs. The results of this emphasize the influence of these pedological parameters in the control of the {sup 137}Cs soil-plant transfer process. The previous knowledge of transfer factors, enable to infer the degree of radio vulnerability of a soil that's potentially subject to radioactive contamination, which will help in the planning of emergency treatment in short, medium and long term in rural areas close to nuclear plants, as well as the selection of adequate places for the waste storage and nuclear installations. (author)

Detection of outliers by neural network on the gas centrifuge experimental data of isotopic separation process; Aplicacao de redes neurais para deteccao de erros grosseiros em dados de processo de separacao de isotopos de uranio por ultracentrifugacao

Energy Technology Data Exchange (ETDEWEB)

Andrade, Monica de Carvalho Vasconcelos

2004-07-01

This work presents and discusses the neural network technique aiming at the detection of outliers on a set of gas centrifuge isotope separation experimental data. In order to evaluate the application of this new technique, the result obtained of the detection is compared to the result of the statistical analysis combined with the cluster analysis. This method for the detection of outliers presents a considerable potential in the field of data analysis and it is at the same time easier and faster to use and requests very less knowledge of the physics involved in the process. This work established a procedure for detecting experiments which are suspect to contain gross errors inside a data set where the usual techniques for identification of these errors cannot be applied or its use/demands an excessively long work. (author)

Procedures development and methodology of control for application of good manufacture practices (GMP) on human blood irradiation; Desenvolvimento de procedimentos e metodologia de controle para aplicacao de boas praticas de fabricacao (BPF) na irradiacao de sangue humano

Energy Technology Data Exchange (ETDEWEB)

Boghi, Claudio

2008-07-01

The irradiation of human blood is used to avoid the TA-GVHD (transfusion-associated graft-versus-host-disease), a rare but devastating adverse effect of leukocytes present in blood components for a immunocompetent transfusion recipients. Usually this irradiation practice is performed to a physical elimination of leukocytes. The implementation of the procedures will assure that the properly dose in a range of 25 Gy to 50 Gy will be delivered to the blood in the bag collected in a blood tissue bank. The studies of the procedures in order to establish a GMP (Good Manufacturing Practices) were developed under the guidelines of the standard ISO 11137 - Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization. In this work, two dosimetric systems were used for dose mapping during the studies of irradiator qualification, loading pattern, irradiation process validation and auditing. The CaS0{sub 4}:Dy dosimeter presented difficulties concerning to uncertainty on dose measurement, stability, traceability and calibration. The PMMA and Gafchromic dosimetric systems have shown a better performance and were adopted on studies of irradiators qualification that are necessary to implementation of GMP. The irradiation tests have been done in a Gammacell 220 irradiator. The developed procedures can be adapted for different kinds of gamma irradiators, allowing implanting a quality assurance program and a GMP for blood irradiation. (author)

Microstructural development and characterization of lanthanum chromite-based ceramics to application in solid oxide fuel cells; Desenvolvimento microestrutural e caracterizacao de ceramicas a base de cromita de lantanio para aplicacao em celulas a combustivel de oxido solido

Energy Technology Data Exchange (ETDEWEB)

Oliveira, R.N.; Furtado, J.G. de M.; Soares, C.M.; Serra, E.T. [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)], e-mail: rnunes@cepel.br

2006-07-01

This work has for objective to investigate and to characterize the microstructural development of lanthanum chromite-based ceramics (LaCrO{sub 3}) doped with earth alkaline metals, correlating the microstructural parameters (mainly the densification level) and processing parameters with the electrothermal properties reached. Lanthanum chromite-based ceramic systems doped with earth-alkaline metals (Ca, Mg and Sr) had been produced from respective metallic nitrates by solid state reactions process. The phase compositions were evaluated by X-ray diffraction and the densification level by Archimedes method. The microstructural characterization was effected by scanning electron microscopy, energy dispersive X-ray spectroscopy and thermal analysis techniques. Electrical tests were used to evaluate the electrical conductivity of the studied ceramics. The obtained results corroborate the literature comments concerning the difficulty of lanthanum chromite-based ceramics with high densification level and evidence the great influence of the nature of the dopants on the sintering mechanism and the microstructural and electric characteristics of the produced ceramics. The best ones results, in terms of densification and electrical conductivity, had been gotten through multiple doping with calcium and strontium, and in sintering temperature conditions lower that the normally considered to pure or monodoped lanthanum chromite-based ceramics. (author)

Application of perturbation theory to sensitivity calculations of PWR type reactor cores using the two-channel model; Aplicacao da teoria de perturbacao para calculos de sensibilidade em nucleos de reatores PWR, usando um modelo de dois canais

Energy Technology Data Exchange (ETDEWEB)

Oliveira, A.C.J.G. de

1988-12-01

Sensitivity calculations are very important in design and safety of nuclear reactor cores. Large codes with a great number of physical considerations have been used to perform sensitivity studies. However, these codes need long computation time involving high costs. The perturbation theory has constituted an efficient and economical method to perform sensitivity analysis. The present work is an application of the perturbation theory (matricial formalism) to a simplified model of DNB (Departure from Nucleate Boiling) analysis to perform sensitivity calculations in PWR cores. Expressions to calculate the sensitivity coefficients of enthalpy and coolant velocity with respect to coolant density and hot channel area were developed from the proposed model. The CASNUR.FOR code to evaluate these sensitivity coefficients was written in Fortran. The comparison between results obtained from the matricial formalism of perturbation theory with those obtained directly from the proposed model makes evident the efficiency and potentiality of this perturbation method for nuclear reactor cores sensitivity calculations (author). 23 refs, 4 figs, 7 tabs.

Chemical synthesis of composite HML / PDMcT / PAni and its application as the trhiodan adsorbent in aqueous solutions; Sintese quimica de compositos de HML/PDMcT/PAni e sua aplicacao como adsorvente do trhiodan em solucoes aquosas

Energy Technology Data Exchange (ETDEWEB)

Girotto, L.G.; Pacheco, I.; Freitas, L.L. de; Oliveira, R.S.; Amaral, F.A. do; Canobre, S.C., E-mail: aylagg.eab@gmail.com [Universidade Federal de Uberlandia (UFU), MG (Brazil). Instituto de Quimica

2016-07-01

The mixed hydroxide lamellar [Co -Al- Cl] was synthesize by the co- precipitation method constant pH 8. The synthesis composite HML/PDMcT/PAni was carried out via chemical. The DRX composite HML/PDMcT/PAni showed that one amorphicity in the conductor polymer doesn't hid the diffraction peaks characteristic of HML. The MEV micrographs of composite HDL / PDMcT / PAni showed a large number of crystallites compacts with several shapes characteristic to PDMcT and nanofibers of polyaniline indicating an association between the different constituents forming the composite. The results of the adsorption was 98% of the pesticide in the composite HML / PDMcT / PAni , the composite can contribute so significantly to one Thiodon withdrawal in contaminated pesticide waters. (author)

Effects of the copper vapour laser radiation in the root canal wall dentine: in vitro experiment using scanning electron microscopy and stereoscopy; Efeitos da radiacao laser de vapor de cobre na parede de dentina de canais radiculares: estudo in vitro por meio de microscopia eletronica de varredura e microscopio estereoscopico

Energy Technology Data Exchange (ETDEWEB)

Silveira, Maria Claudia Garcia da

2001-07-01

Ten human uniradicular teeth had their crown removed along the cement-enamel junction and right away a proper chemical-surgical preparation of the radicular canals was done; the roots were longitudinally sectioned in order to allow the irradiation of the surfaces of the root canals wall dentine. The hemi-roots were separated in two groups: group I (control), with four hemi-roots, not irradiated; and group II, with 16 hemi-roots, subdivided in four sub-groups submitted to the following exposition time: 0,02 s; 0,05 s; 0,1 s and 0,5 s. A copper vapour laser was used with a 510,6 nm wavelength, total average power of 11 W in green and yellow emissions; average power of 6,5 W in green emission; pulse repetition rate of 16.000 Hz and pulse duration of 30 ns. The pulse energy (green line) is 0,4 mJ and the peak power 13,5 W. The laser cavity is unstable type (R{sub 1}=3.900 mm and R{sub 2}-250 mm). The focusing have focal length lens f{sub 1}=250 mm and f{sub 2}=150 mm. The beam quality is of the M{sup 2}=5. The results obtained by scanning electron microscopy analysis showed the appearance of a cavity in the region of the laser beam incidence in the edges of this cavity, dentin was melt and resolidified presenting also cracks due to heat diffusion. Based on these results, we concluded that the size of the cavity formed in the dentin is directly proportional to the rate of exposure and, the more laser emission in the same area, more damage in the root canals wall dentin occurs. More studies need to be done with different exposition's time in order to obtain a safety protocol that does not cause injury in dental and support tissue. (author)

Study of deformation and fracture micro mechanisms of titanium alloy Ti-6Al-4V using electron microscopy and and X-ray diffraction techniques; Estudo dos micromecanismo de deformacao e fratura da liga de titanio Ti-6Al-4V utizando-se tecnicas de microscopia eletronica e difracao de raios X

Energy Technology Data Exchange (ETDEWEB)

Morcelli, Aparecido Edilson

2009-07-01

This present work allowed the study of deformation and fracture micro mechanisms of titanium alloy Ti-6Al-4V, used commercially for the manufacture of metallic biomaterials. The techniques employed for the analysis of the material under study were: scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The study of the influence and behavior of the phases present in titanium alloys is important to evaluate the behavior of cracks in titanium alloys with high mechanical strength, which have fine alpha ({alpha}), beta ({beta}) and ({alpha}{+-}{beta}) microstructure, linking the presence of the phases with the strength of the material. The evaluation in situ of deformation and fracture micro mechanisms were performed by TEM and was also a study of phase transformations during cooling in titanium alloys, using the techniques of bright field, dark field and diffraction of electrons in the selected area. After heat treatment differences were observed between the amount of in relation to the original microstructure of the {beta} and {alpha} phases material for different conditions used in heat treatment applied to the alloy. The presence of lamellar microstructure formed during cooling in the {beta} field was observed, promoting the conversion of part of the secondary alpha structure in {beta} phase, which was trapped between the lamellar of alpha. (author)

Characterization of Paraiba state, Brazil, clays used for clearing of oil of frying for application as bio fuel; Cacterizacao de argilas do estado da Paraiba, Brasil, utilizaadas para clareamento de oleos de fritura usados para aplicacao como biobombustivel

Energy Technology Data Exchange (ETDEWEB)

Araujo, E.P.; Oliveira, S.V. de; Medeiros, K.M. de; Araujo, E.M.; Fook, M.V.L. [Universidade Federal de Campina Grande (DEMa/UFCG), PB (Brazil). Dept. de Engenharia de Materiais], e-mail: elainepatriciaaraujo@yahoo.com.br

2008-07-01

The search for new sources of renewable energy order to minimize environmental impacts has led the scientists to develop new alternatives, such as the use of recycling of frying oils to produce biodiesel. The reuse of these oils has the advantage of obtaining a biofuel with the cost / benefit competitive. However, the conditions of post-consumer oils require treatment prior to its conversion the chemical (transesterification), removing solid particulate contaminants and adjusting its color using the clay of Paraiba. The use of biodiesel as fuel presents a reduction of levels of environmental pollution. This study aimed to characterize clay of Paraiba to be used in the clearing of frying oil. It was observed through the results of the Xray fluorescence (XRF) and infrared spectroscopy by Fourier Transform (FTIR), which the clays tested, have been effective in clearing of frying oils, making them similar to oil 'virgin'. (author)

Gingival healing after gingivectomy procedure and low intensity laser irradiation. A clinical and biometrical study in anima nobile; Reparacao gengival apos a tecnica de gengivectomia e aplicacao de laser em baixa intensidade. Avaliacao clinica e biometrica em humanos

Energy Technology Data Exchange (ETDEWEB)

Amorim, Jose Claudio Faria

2001-07-01

For the present study seven patients presenting periodontal disease were selected in a way that they required the performance of gingivectomy procedure in the region of premolars in both sides, being this in the upper or lower region. After the surgical procedure one side was submitted to low intensity laser radiation, wavelength 685 nm, power 50 mW and fluency of 4J/cm{sup 2}, contact mode. The other side was used as a control, not receiving any laser irradiation. Healing process for both sides, was clinically and biometrically evaluated and compared using photographs for the periods: pre-operative, immediate post-operative, 3, 7,14,21, 28 and 35 days. The analysis was performed by 3 specialists in Periodontology considering aspects of healing. Results were submitted to statistical analysis. Biometrical evaluation showed improvement of healing for the period of 21 and 28 days in the lased group. Clinical evaluation showed better reparation mainly after the third day for the active group. Laser group was considered to present an improved healing when compared to the control group. (author)

Determining internal movement costs at a warehouse using activity-based costing: offshore petroleum production application; Determinacao dos custos de movimentacao interna de um deposito utilizando a metodologia de custeio baseado em atividades: aplicacao a producao de petroleo offshore

Energy Technology Data Exchange (ETDEWEB)

Azevedo, Italo Ricardo Moreira de [Brasil Supply S.A., Vitoria, ES (Brazil); Leal, Jose Eugenio [Pontificia Univ. Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil)

2004-07-01

As from the flexibilization of the petroleum monopoly, which took place in the second half of the 1990's, the petroleum and gas sector in Brazil has undergone a series of changes that have directly impacted the commercial relations among the companies in the sector. The increases in operational efficiency and reduction of costs have become basic factors for the companies wishing to compete in this market. This paper presents a study whose objective is to map, model, and determine the costs involved in the process for internal movement in a warehouse used as logistics support to offshore petroleum production. Based on the description of the internal movement process for product storage, the main resources are identified. Then, a mathematical model based on Activity-Based Costing is draw up, in which the results generated comprise the values for internal movement costs for each type of product moved in the warehouse. (author)

Deployment case study of a global applied 3D modeling process of pipe supports; Estudo de caso da aplicacao de uma ferramenta para automatizacao e controle do processo de modelagem de suportes para tubulacoes em maquetes 3D

Energy Technology Data Exchange (ETDEWEB)

Balbi, Diego Junca Gonzaga; Oliveira, Renato Fonseca; Pinto, Rogerio Dias [Promon Engenharia, Sao Paulo, SP (Brazil)

2012-07-01

An activity in engineering projects has been changed over the past two decades with regarding to working practices. Difficulties arising from the increasing complexity of projects, especially in industrial sectors, have taken this activity a constant search for new methods and tools which enable increased speed in performing tasks of daily life of the project. Currently, the development of these tools has been based on a friendlier interface to the end user, minimizing the need for extensive and repetitive training. Moreover, the industry responsible for this development of these kind of tools is still in the search for knowledge in order to explore the plain capabilities within wide projects on solutions offered. This article deals with one of these innovations on the spotlight, besides of being not a technology issue. It's based on the same basic platform available since the creation of models used together with databases. However, this new vision of work inserts one more specialty in the virtual designing of structures to support industrial pipes, as well as other design disciplines, nor taken advantage of these capabilities with regard to the generation of information, its control and management. (author)

Seeking tools for image fusion between computed tomography, structural and functional magnetic resonance methods for applications in neurosurgery; Ferramentas para fusao de imagens dos metodos de tomografia computadorizada, ressonancia magnetica e ressonancia magnetica funcional para aplicacao pre-neurocirurgica

Energy Technology Data Exchange (ETDEWEB)

Rocha, Liana Guerra Sanches da, E-mail: liana@einstein.br [Departamento de Diagnostico por Imagem, Hospital Israelita Albert Einstein - HIAE, Sao Paulo (SP) (Brazil); Amaro Junior, Edson [Faculdade de Medicina, Universidade de Sao Paulo - USP, Sao Paulo, SP (Brazil). Deptartamento de Diagnostico por Imagem; Instituto do Cerebro - InCe, Hospital Israelita Albert Einstein - HIAE, Sao Paulo, SP (Brazil)

2012-04-15

To evaluate tools for the fusion of images generated by tomography and structural and functional magnetic resonance imaging. Methods: Magnetic resonance and functional magnetic resonance imaging were performed while a volunteer who had previously undergone cranial tomography performed motor and somatosensory tasks in a 3-Tesla scanner. Image data were analyzed with different programs, and the results were compared. Results: We constructed a flow chart of computational processes that allowed measurement of the spatial congruence between the methods. There was no single computational tool that contained the entire set of functions necessary to achieve the goal. Conclusion: The fusion of the images from the three methods proved to be feasible with the use of four free-access software programs (OsiriX, Register, MRIcro and FSL). Our results may serve as a basis for building software that will be useful as a virtual tool prior to neurosurgery. (author)

Application of field-bus to interface field instrumentation in hazardous areas of TRANSPETRO pipelines and terminals, Sao Paulo region; Aplicacao de barramento de campo (fieldbus) em areas classificadas nos dutos e terminais da TRANSPETRO, regiao de Sao Paulo

Energy Technology Data Exchange (ETDEWEB)

Corcioli, Mario Sergio [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

2005-07-01

The following presentation focuses on the experiences that we have been adopting with success during the past seven (7) years at the TRANSPETRO Pipelines and Terminals, in the State of Sao Paulo region, to integrate the field instruments (switches, actuators, solenoid valves, motor starter and switchgear panels, and so on) installed in the hazardous areas, to Programmable Logic Controllers (PLC) connected to Remote Input and Output Modules (I/O) in the hazardous area, designated to interface the field signals and condition them to communicate via a bus in the field (field bus), making use of a standard open type industrial communication bus - PROFIBUS DP V1, under which the independent manufacturers follow the industrial Standards EN50170 and EN50254, pointing out the advantages of the application of this instrumentation philosophy, that among other philosophies, allows the use of engineering tools for the asset management and to assist the maintenance and operation of industrial plants. (author)

Evaluation of mechanical and electrical properties for an aluminium alloy thermo resistant for application in electrical cables and wires; Avaliacao das propriedades mecanicas e eletricas para uma liga de aluminio termorresistente para aplicacao em fios e cabos eletricos

Energy Technology Data Exchange (ETDEWEB)

Amaral, M.A.; Reis, W.L.S.; Souza, A.T.M.D.; Quaresma, J.M.V. [Universidade Federal do Para, Belem, PA (Brazil)

2010-07-01

With the constant growth of brazilian industry and, consequently, the demand for electric power, realized the need to develop new metal alloys for use in wire and cable transmission and distribution of electricity to support the high temperatures which will be submitted. this study is based on the modification of aluminum by contents of Zr. the alloys were cast into ingot shaped {sup u,} after machined to a diameter of 18 mm, were homogenized and cold-worked (rolled). subsequently underwent a series of heat treatments at temperatures (230 degree c, 310 degree c and 390 degree c) for one hour in order to obtain the recrystallization temperature of alloys and demonstrate its potential for thermo resistant. With the inclusion of increasing contents of Zr, the alloy showed a higher recrystallization temperature and an increase in their limit of tensile strength. (author)

Methodology to evaluate the energy associated to the industrial solid wastes: application in a metropolitan region of Campinas, Sao Paulo state, Brazil; Metodologia para avaliacao da energia associada ao residuo solido industrial: aplicacao a regiao metropolitada de Campinas

Energy Technology Data Exchange (ETDEWEB)

Batista, Tereza Rosana Orrico [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Curso de Pos-graduacao em Planejamento de Sistemas Energeticos; Teixeira, Egle Novaes [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Civil, Arquitetura e Urbanismo; Silva, Ennio Peres da [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico. Lab. de Hidrogenio

2004-07-01

The aim of this work is to the application of a methodology to evaluate the energy associated to the industrial solid wastes in the metropolitan region of Campinas. The methodological route proposed is: the characterization of the research area and the production/management of the industrial solid wastes; the energetic classification and the qualitative/quantitative research of the energy associated to the industrial solid wastes; and, the valuation of the applicability of the energetic utilization mechanisms proposed to the region. This methodology when applied at the Campinas metropolitan region proved to be valid and it resulted in a synthetically presentation of the social and environmental reality of the industrial sector and the destination of the wastes, as well as it indicated the potentialities related to the energetic utilization of the industrial solid waste in the region. With the obtained results it was shown the importance of the the production and the destination of the industrial solid wastes in the Campinas metropolitan region , and the meaning, in terms of electric potency, of the values of the energy associated to the wastes with a known factor of energetic conversion shown in the researched sample. (author)

Life-cycle optimization model for distributed generation in buildings

Science.gov (United States)

Safaei, Amir

afetado por perturbacoes relativas aos custos de combustivel. A aplicacao do modelo proposto foi testada num caso de estudo real, um edificio comercial localizado na cidade de Coimbra, em Portugal.

In vitro study of 960 nm high power diode laser applications in dental enamel, aided by the presence of a photoinitiator dye: scanning electron microscopy analysis; Estudo in vitro das aplicacoes do laser de diodo de alta potencia 960 nm em esmalte dentario, assistido por um fotoiniciador: analise de microscopia eletronica de varredura

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Marcelo Vinicius de

2002-06-15

The objective of this study is to verify if a high power diode laser can effectively modify the morphology of an enamel surface, and if this can be done in a controlled fashion by changing the lasers parameters. Previous studies using SEM demonstrated that through irradiation with Nd:YAG laser (1064 nm) it is possible to modify the morphology of the dental surface in such way as to increase its resistance against caries decays. The desired procedures that should achieve a decrease of the index of caries decays and of its sequels are on a primary level, which means that action is necessary before the disease installs itself. In this study it was used for the first time a prototype of a high power diode laser operating at 960 nm, produced by the Laboratory of Development of Lasers of the Center for Lasers and Applications of the IPEN. This equipment can present several advantages as reliability, reduced size and low cost. The aim was establish parameters of laser irradiation that produce the desired effects wanted in the enamel and protocols that guarantee its safety during application in dental hard tissues, protecting it of heating effects such as fissures and carbonization. (author)

Synthesis and chemical modification of polymeric resins for the treatment of cations and aromatic hydrocarbons in produced oily water; Sintese de modificacao quimica de resina polimerica e aplicacao na remocao de cations e hidrocarbonetos aromaticos presentes em agua produzida

Energy Technology Data Exchange (ETDEWEB)

Aversa, Thiago M.; Rodrigues, Monique F.; Vieira, Helida V.P.; Queiros, Yure G.C.; Lucas, Elizabete F. [Universidade Federal do Rio de Janeiro, Instituto de Macromoleculas, Lab. de Macromoleculas e Coloides na Industria do Petroleo, Rio de Janeiro, RJ (Brazil)], e-mail: thiagoaversa@ima.ufrj.br

2011-07-01

The use of chemically modified resins in oily water treatment process is not very developed yet. Because of this, this work suggests to study the styrene and divinylbenzene sulfonation effect on oil and grease, aniline and calcium removal from the water. The aniline, oils and greases belong to a class of toxic organic compounds, with the Brazilian maximum limits established for disposal in CONAMA 393/2007, while the calcium ions belong to the group of cations of alkaline earth metals which improve hardness to the water, may cause fouling as carbonates and sulfates form. By using sulfonated resins in oily water treatment it is possible to remove not only oils and greases but also calcium and aniline. These kinds of polar compounds are removed because of the cation exchange capacity of resin. (author)

Model for equipment life-cycle cost forecasting and its application in assets management in the oil industry; Modelo para previsao de custo de ciclo de vida de equipamentos e sua aplicacao na gestao de ativos na industria do petroleo

Energy Technology Data Exchange (ETDEWEB)

Cesca, Igor Gimenes; Elias Junior, Antonio; Carvalho, Marcos Henrique [Universidade Estadual de Campinas (DEP/FEM/UNICAMP), SP (Brazil). Dept. de Engenharia de Petroleo; Lima, Gabriel Alves da Costa [Centro de Estudos de Petroleo (CEPETRO/UNICAMP), SP (Brazil)

2012-07-01

In the area of oil exploration and production (E and P), knowing the behavior of the equipment in their life cycles becomes even more important than in other industries due to: 1) high cost and 2) severity in terms of requirements safety. The purchase of equipment should not be decided only at the initial cost, but through the life cycle cost (LCC). This paper presents a study to find the cost over the life cycle of a group of equipment used in the petroleum industry by methods of dynamic programming, as well as a discussion on how to use such information in assets management in order to obtain better financial indicators. The main causes of variation in the useful economic life of equipment is the resale value and maintenance costs. Thus, it is possible to avoid high expenditure on maintenance costs and avoid an excessive depreciation of the equipment. So it is possible to conclude that the more intense the depreciation of value, the greater the useful economic life. For maintenance costs, the more intense are the costs, the lower the useful economic life. (author)

Influence of application time for 32-P labelled triple superphosphate on the fertilizer use efficiency and productivity of potato. Influencia da epoca de aplicacao de 32-P superfosfato triplo na eficiencia da fertilizacao fosfatada e na produtividade da batata

Energy Technology Data Exchange (ETDEWEB)

Bastidas O, O G; Leon A, A [Instituto de Asuntos Nucleares, Bogota (Colombia); Urquiaga C, S [Empresa Brasileira de Pesquisa Agropecuaria, Seropedica, RJ (Brazil)

1988-09-01

A study was performed on a soil derived from volcanic ash (Andic Humitropept), in Pasto (Narino), Colombia, to investigate the influence of additions of 100 and 200 Kg P[sub 2] O[sub 5] ha[sup -1], at two application times (plating and 30 days after emergence - DAE), on the fertilizer use efficiency and productivity of potato (Solanum tuberosum L.) cv. Pardo Pastusa. At planting the phosphorus was applied in a continuous row in the furrow, and at 30 DAE at one side of the plant row, and immediately covered with soil from both sides of the furrow. The fertilizer used was 32 P labelled triple superphosphate (143.59 [mu] Ci.g P[sup -1]). It was found that: (a) the phosphorus fertilization significantly increased (P<0.05) the yield (from 19.9 to 37.7 t. ha[sup -1]) and the accumulation of P (from eight to 17.8 Kg P ha[sup -1]) by the tubers, but there was no significant effects of times of the fertilizer application; (b) the accumulation of P by the plant accompanied the accumulation of plant dry matter; (c) at 75 DAE the fraction of fertilizer P in the plant shoot in the treatment fertilizer at 30 DAE (52.1%) was significantly higher than that fertilized at planting (21.8%), and this corresponded to a P fertilizer use efficiency of 2.4 and 0.82%, respectively. (author).

Synthesis of protons exchange polymeric membranes via co-poly-esters doped with sodium dodecyl sulfate for application in PEM fuel cells; Sintese de membranas polimericas condutoras de protons por imobilizacao de MDs em copoliesteres para aplicacao em PEM-FC

Energy Technology Data Exchange (ETDEWEB)

Fiuza, R.A.; Brioude, M.M.; Bresciani, D.; Jose, N.M.; Boaventura, J.S. [Universidade Federal da Bahia (IQ/UFBA), Salvador, BA (Brazil). Inst. de Quimica

2008-07-01

Polymers are largely studied for use in PEM-type fuel cell (Proton Exchange membrane, PEMFC). These fuel cells are based on polymer membranes as electrolyte, also called protons conductor. This work developed co-polyesters made electrical conductors by doping with sodium dodecyl sulfate. The copolymers were synthesized from the copolymerization of terephthalic and adipic acids with glycerol. The material was processed in a reactor and shaped by hot pressing, yielding homogeneous and flexible plates, with excellent surface finish. The co-polyesters were analyzed by SEM, FTIR, TG, DSC, and XRD. The thermal analysis showed that the composites were thermally stable up to about 250 deg C. The micrographics revealed the MDS homogeneously dispersed in the polymeric matrix. These copolymers showed electrical conductivity between 10-7 to 10-1 S/cm, suggesting strong potential use in PEM fuel cells. (author)

Effect of electroremediation application in the structure and contaminants of spent catalytics: Evaluation using NMR, EPR, DRX and XRF; Efeito da aplicacao da eletrorremediacao na estrutura e nos contaminantes de catalisador desativado: avaliacao por tecnicas de RMN, RPE, DRX e FRX

Energy Technology Data Exchange (ETDEWEB)

Leonel, R.F.; Valt, R.B.G.; Godoi, L.; Ponte, M.J.J.S.; Ponte, H.A. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Centro Politecnico

2015-07-01

The electrokinetic remediation process, through the application of electric potential and different electrolytes, aimed at mobilizing and removing contaminant metals in spent catalytic cracking catalysts. In this study, FCC spent catalysts were studied after the remediation process with three different electrolytes (solutions of sodium citrate, sulfuric acid or citric acid). The techniques of XRD, XRF, NMR and EPR were used in order to evaluate the changes. The results indicated that the electrokinetic remediation tends to reorganize the internal structure of the catalyst, recovering part of the crystallinity and removing a percentage of the contaminants. (author)

Synthesis of ceramics membranes using ZrO{sub 2} obtained by Pechini method aiming it application in oil/water separation; Sintese de membranas ceramicas utilizando ZrO{sub 2} obtido pelo metodo Pechini visando sua aplicacao na separacao oleo/agua

Energy Technology Data Exchange (ETDEWEB)

Maia, D.F.; Lira, H.L.; Vilar, M.A.; Costa, A.C.F.M.; Oliveira, J.B.L.; Kiminami, R.H.G.A.; Gama, L.

2004-07-01

The water produced in the oil production presents emulsified oil drops of difficult separation causing problems in the reinjection and the discarding. The conventional methods used in the separation oil/water don't clean all the water with efficiency and low cost. Thus, the ceramic membranes appear as a new option for being material very resistant chemistry and thermal, of high perm selective and high efficiency in use in processes of micro filtration and ultrafiltration separation. The zirconia is considered an adequate material to obtain of such membranes and the Pechini method is one promising technique in the attainment of after ultrafine with controlled characteristics. Thus the objective of this work was to prepare ceramic membranes from after synthesized by the Pechini method. The results had shown that the Pechini method was efficient in the attainment of ZrO{sub 2} powder, nanometric, with size of crystal of 7,2 nm and with average diameter of agglomerated 4,94{mu}, indicating that this material can be used in the attainment of membranes of micro filtration and ultrafiltration, adjusted to the separation oil/water The micrographs of the obtained membranes show a homogeneous surface where if it can visualize pores uniformly distributed. (author)

Technical application of current analysis to detect broken bars in three-phase induction motors at ArcelorMittal Tubarao; A aplicacao da tecnica de analise de corrente para deteccao de barras quebradas nos motores e inducao trifasicos na ArcelorMittal Tubarao

Energy Technology Data Exchange (ETDEWEB)

Antunes, Harison Araujo; Rocha, Rogerio Hubner; Oliveira Filho, Jessui de; Spinasse, Amarildo; Calente, Aderaldo [ArcelorMittal Tubarao, ES (Brazil). Dept. de Producao de Gusa e Energia

2009-11-01

Most modern machinery operates from three-phase induction motors that, in time, can develop faults. These faults can cause the machine to stop working or decrease its efficiency level in the productive process. When a motor suffers a fault it generates indication of defects in several ways: changing in vibrating signals, temperature variations, noises, and electromagnetic field alteration. Known as motor current signature analysis, this technique allows fault detection with mechanical and electrical origin in squirrel-cage three-phase induction motors. This technique is used within ArcelorMittal Tubarao to analyze and follow the motor's rotor broken bar tendency. At ArcelorMittal Tubarao, 450 motors are monitored, at 13200, 3300 and 440V and with power rating exceeding 55 KW. This paper will show the results of applying this technique during the last 2 years, as well as the several types of broken bars detected, fault characteristics, the type of load it operates in each fault encountered, and the fault range caused in the productive process. (author)

Utilization of response surface for optimization of the production of a biosurfactant with application in the removal of petroleum-derived; Utilizacao de superficie de resposta para a otimizacao da producao de um biossurfactante com aplicacao na remocao de derivado de petroleo

Energy Technology Data Exchange (ETDEWEB)

Sarubbo, Leonie A.; Rufino, Raquel D.; Luna, Juliana M.; Farias, Charles B.B.; Santos, Valdemir A. dos [Universidade Catolica de Pernambuco (UNICAP), Recife, PE (Brazil)

2012-07-01

The surfactants, amphipathic compounds capable of reducing the surface tension of aqueous media, find application in many industries, especially in the petroleum, cosmetic and food, such as dispersants, emulsifiers and surfactants. With the necessity of environmental preservation, surfactants of micro-organisms origin, in substitution of synthetic surfactants, have become very attractive, since they are biodegradable and less toxic although their production costs are still high because of the substrates used and of the purification processes involved. Considering the need to reduce costs associated with the production of microbial surfactants, a strain of bacteria of the genus Pseudomonas, isolated from the port area was cultured in medium containing low-cost agro-industrial wastes, molasses and corn steep liquor, as substrates according a central composite rotatable design (CCRD) in order to evaluate the influence of independent variables molasses and corn steep liquor concentrations on the response variable surface tension. The biosurfactant was able to reduce the water surface tension from 71 mN / m to values around 27.5 mN / m. The dispersion ability and the capacity of oil removal of the surfactant was demonstrated. The possibility of application of biosurfactants in the remediation of oil polluted environments motivates the advancement of research to develop this technology for effective use in treatment of contaminated soils and waters. (author)

Development of controller of acquisition and sample positioner for activation for use in measurements of short half-life radioisotopes; Desenvolvimento de dispositivo movimentador automatizado de amostras com vista a aplicacao em medidas de radioisotopos que possuem curto tempo de meia-vida

Energy Technology Data Exchange (ETDEWEB)

Secco, Marcello

2016-08-01

High resolution gamma spectroscopy measurements have several applications. Those involving short half-life radioisotope measurements may present low precision problems when the radioactive source is far from detector end cup and in the very high activity situations also can present accuracy loss due to dead time and pile-up effects. A way to overcome these problems is changing the source detector distance as the activity is decreasing, and thereby maximizing the statistical counting. In the present study, the Controller of Acquisition and Sample Positioner for Activation (CASPA) was developed. It is a low cost and weight device, made with low atomic number materials designed to assist gamma spectroscopy measurements, which is able to control the distance between the source and the detector, even allowing that there is a change of this distance during the measurement process. Because it is automated it optimizes the time of the operator, who has complete freedom to program their routine measurements in the device besides minimizing the radiation dose in the operator. An interface that allow the user control the CASPA system and to program the acquisition system was created. Tests aiming to optimize the operation of CASPA system were carried out and the safety of the CASPA operation was verified, it was not presented any failure during their tests. It was applied the repeatability tests by the acquisition {sup 60}Co standard source and was found that the positioning of automated system has reproduced the results of static system with a 95% of confidence level. (author)

Application of the mechanism of clean development - MDL to the projects of PCHs operating in isolated system in Brazil; A aplicacao dos mecanismos de desenvolvimento limpo - MDL - em projetos de implantacao de pequenas centrais hidreletricas - PCHs em sistemas isolados no Brasil

Energy Technology Data Exchange (ETDEWEB)

Nunes, Camila Fernandes

2006-07-01

The present work considered to analyze the potential of application of the Mechanism of Clean Development - MDL to the projects of PCHs operating in isolated system. For in such a way, the emissions of gases of effect had been entered greenhouse - GEEs proceeding from a thermoelectric plant operating with diverse types of fuels: oil diesel, combustible oil, natural gas and coal and the emissions of one hydropower plant - a PCH. For comparison effect two scenes of performance of a PCH had been considered standard of 15MW: the first one corresponding to an area flooded of 3km{sup 2} and according to an area of 13km{sup 2}. Had the absence of data of emissions of GEEs for PCHs, a correlation with data of available CO{sub 2} emission of the UHE Curua-Una was established (chosen for the availability of referring data the measurements C-CO{sub 2} emission). The values calculated for the method of chamber of diffusion, which had most of the carbon emissions proceeding from hydropower reservoirs had been used to be proceeding from the diffusion of CO{sub 2} in the surface. The gotten results had demonstrated that it is possible if to credit of the benefits of the MDL through the implantation of PCHs operating in isolated systems in substitution the thermal plants. (author)

Application of natural Ra isotopes and {sup 234}Th as tracers of organic carbon export in Bransfield Strait, Antarctica; Aplicacao dos isotopos naturais de Ra e do Th-234 como tracadores do carbono organico exportado para o Estreito de Bransfield, Antartica

Energy Technology Data Exchange (ETDEWEB)

Vieira, Lucia Helena

2011-07-01

The Southern Ocean is the largest of several high-nutrient, low-chlorophyll (HNLC) regions in the world's oceans. This region plays a major role in regulating the global net transfer of carbon dioxide between the ocean and the atmosphere, in part because the annual photosynthetic uptake of CO{sub 2} by phytoplankton and resulting export of particulate organic carbon (POC) to the deep ocean. The element thorium has multiple radioisotopes that have emerged collectively as a powerful set of tracers for particle associated processes in the oceans. Of all the Th isotopes, {sup 234}Th (half-life 24.1 d) has been the focus of increasing attention and application in the past years. The production of {sup 234}Th from {sup 238}U, coupled with the conservative behavior of {sup 238}U in seawater, makes the source of {sup 234}Th easy to characterize. Moreover, the half-life of {sup 234}Th is sufficiently short to make it sensitive to the short-term (e.g. seasonal) changes that occur in the upper water column of the open ocean or in sediments or water column in coastal areas. Because of its very particle reactive behavior, {sup 234}Th is removed from a parcel of water in only two ways, through decay and through particle flux. Therefore, a steady-state 1D activity balance can be used to calculate its flux. Natural Ra isotopes have been also widely used in marine studies to trace water masses and to quantify mixing processes. This work presents results of a collaborative research on organic carbon fluxes distribution in the Bransfield Strait in order to evaluate its influence in the CO{sub 2} drawdown. Macro-nutrients, micro-nutrients and chlorophyll-a distributions were used to examine the pathway sources. Natural radium isotopes were applied as tracers to study the movement of shelf water, while {sup 234}Th was used as a tracer of particle flux in the upper ocean, since POC export via sinking particles is the primary mechanism of carbon sequestration in the Southern Ocean. Sea water samples for total {sup 234}Th and natural Ra isotopes were collected from 9 to 14 December 2007 on the RV Ary Rongel (Brazilian Navy). Analyses of total {sup 234}Th activities were performed by gross beta counting using a gas-flow low background proportional counter. The long lived Ra isotopes were determined by low-background high efficiency gamma spectrometry. (author)

Implementation and application of a method for quantifying metals and non-metals in drainage water from soils fertilized with phosphogypsum; Implementacao e aplicacao de metodologia para dosagem de metais e nao metais em aguas de drenagem de solos adubados com fosfogesso

Energy Technology Data Exchange (ETDEWEB)

Silva, Camila Goncalves Bof

2010-07-01

Phosphogypsum is a waste generated in phosphoric acid production by the 'wet process'. The immense amount of phosphogypsum yearly produced (around 150 million tons) is receiving attention from environmental protection agencies all over the word, given its potential of contamination. In Brazil, this material has been used for many decades, especially for agricultural application on cropland. Although the phosphogypsum is mainly composed of dehydrated calcium sulfate, it can have high levels of impurities, such as metals (Cd, Cr, Cu, Pb), non-metals (As and Se) and radioactive elements from natural series of {sup 232}Th and {sup 238}U. Therefore, its continuous application as an agricultural agent can result not just in soil contamination, but also contamination of the surface and groundwater due to the runoff and infiltration process. The concern associated with the contamination of aquatic environments increases; when water is used for human consumption, requiring progressive adoption of more restrictive limits. However, some of the conventional analytical techniques used to determine the maximum limit of contaminants in water have detection limits above the maximum limits established by the environmental legislation. This work was aimed to evaluate the mobility of metals and non-metals in soils and, consequently, the contamination of drainage water through greenhouse-scale leaching and transport of toxic elements from soils fertilized with phosphogypsum. Hence, methods were studied and implemented for determination of metals (Cd, Cr, Cu and Pb) using Furnace Graphite Atomic Absorption Spectrometry (GF AAS), as well as for non-metals (As and Se) using Inductively Coupled Plasma Mass Spectrometry (lCP-MS). Effects of different chemical modifiers on the determination of Cd, Cr, Cu and Pb concentration by GF AAS were also investigated. In general, it was observed that the metal and non-metal concentration were below than the actual detection limit of the equipment for all conditions of interest, indicating the low mobility of the analyzed elements in the soil column. (author)

Guarantee-bond: main concepts and overview of its application within the bidding process involving inactive areas with marginal accumulations of petroleum and natural gas; Seguro-garantia: conceituacao e panorama de sua aplicacao no processo licitatorio envolvendo areas inativas com acumulacoes marginais

Energy Technology Data Exchange (ETDEWEB)

Eduardo, Antonio Sergio; Herrmann, Hildebrando [Universidade ERstadual de Campinas (UNICAMP), SP (Brazil); Ferreira, Doneivan Fernandes [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil)

2008-07-01

The Brazilian Petroleum Agency has been working on the adoption of an efficient financial guarantee system in order to ensure the fulfillment of contractual obligations in upstream-related activities. This process is aimed at: creating incentives for responsible behavior in the industry; attending current demands from society for efficiency and transparency; attending to industries demands for the maintenance of investment flows within the sector; safeguarding the government against financial liabilities caused by irresponsible or insolvent concessionaires; and keeping the sector attractive and competitive for small and medium companies. Within the bidding process for the concession of inactive areas with marginal accumulations, ANP requires two kinds of guarantees: a bidding guarantee, and a PTI guarantee (for obligations under the Initial Work Program-PTI). In both cases, the ANP allows two kinds of financial instruments: 'Seguros-Garantia' and 'Letters of Credit'. According to bidding rules, guarantees must be presented before the bidding process. This instrument ensures that the winner will sign the concession contract. The PTI guarantee ensures performance in a timely fashion. This paper describes and analyzes the instrument 'Seguro-Garantia', its evolution, existing categories, and applicability. (author)

A study of digital hardware architectures for nuclear reactors protection systems applications - reliability and safety analysis methods; Um estudo de arquiteturas de hardware para aplicacao em sistemas digitais de protecao de reatores nucleares - metodos de analise de confiabilidade e seguranca

Energy Technology Data Exchange (ETDEWEB)

Benko, Pedro Luiz

1997-07-01

A study of digital hardware architectures, including experience in many countries, topologies and solutions to interface circuits for protection systems of nuclear reactors is presented. Methods for developing digital systems architectures based on fault tolerant and safety requirements is proposed. Directives for assessing such conditions are suggested. Techniques and the most common tools employed in reliability, safety evaluation and modeling of hardware architectures is also presented. Markov chain modeling is used to evaluate the reliability of redundant architectures. In order to estimate software quality, several mechanisms to be used in design, specification, and validation and verification (V and V) procedures are suggested. A digital protection system architecture has been analyzed as a case study. (author)

Application of the physiological and morphological parameters of the brazilian population sample to the mathematical model of the human respiratory tract; Aplicacao dos parametros fisiologicos e morfologicos de uma amostra da populacao brasileira no modelo matematico do trato respiratorio humano

Energy Technology Data Exchange (ETDEWEB)

Reis, Arlene Alves dos

2005-07-01

The Human Respiratory Tract Model proposed by the ICRP Publication 66 accounts for the morphology and physiology of the respiratory tract. The characteristics of air drawn into the lungs and exhaled are greatly influenced by the morphology of the respiratory tract, which causes numerous changes in pressure, flow rate, direction and humidity as air moves into and out of the lungs. Concerning the respiratory physiological parameters the breathing characteristics influence the volume, the inhalation rate of air and the portion that enters through the nose and the mouth. These characteristics are important to determine the fractional deposition. The model uses morphological and physiological parameters from the Caucasian man to establish deposition fractions in the respiratory tract regions. It is known that the morphology and physiology are influenced by environmental, occupational and economic conditions. The ICRP recommends, for a reliable evaluation of the regional deposition, the use of parameters from a local population when information is available. The main purpose of this study is to verify the influence in using the morphology and physiology parameters representative of a sample of the Brazilian population on the deposition model of the ICRP Publication 66. The morphological and physiological data were obtained from the literature. The software EXCEL for Windows (version 2000) was used in order to implement the deposition model and also to allow the changes in parameters of interest. Initially, the implemented model was checked using the parameters defined by the ICRP and the results of the fraction deposition in the respiratory tract compartments were compared. Finally, morphological and physiological parameters from Brazilian adult male were applied and the fractional deposition calculated. The results suggest a significant variation in fractional deposition when Brazilian parameters are applied in the model. (author)

Use of cost benefit analysis methodology in the meaning of motorization level from small and medium hydroelectric power plants; Aplicacao de metodologia do tipo analise custo x beneficio na definicao do nivel de motorizacao de pequenas e medias centrais hidroeletricas

Energy Technology Data Exchange (ETDEWEB)

Mazzon, J G; Simoes, N S; Ramos, D S; Ishida, S [Companhia Energetica de Sao Paulo, SP (Brazil)

1990-12-31

The technical and economic justifications that bringing the waterfall division reformulation between Lucas Nogueira Garcez Plant and Capivara Plant in Paranapanema River (Brazil) are described, including a comparative economic of Canoas (Alta), Canoas I and Canoas II passages, motorization study and energetic benefits. The reasons of the Bulbo turbines choice and dimensioning definition of the installed power by the new reference economic parameters are also presented. (C.G.C.). 5 refs, 11 tabs.

Application of {sup 222} Rn as a tracer of groundwater discharge at the coastal zone of Ubatuba, Sao Paulo State, Brazil; Aplicacao de {sup 222} Rn como tracador da descarga de aguas subterraneas na regiao costeira de Ubatuba, Sao Paulo

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Joselene de; Farias, Luciana A.; Mazzilli, Barbara P. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Dept. de Radiometria Ambiental]. E-mail: jolivei@net.ipen.br; Burnett, William C. [Florida State Univ., Tallahassee, FL (United States); Saraiva, Elisabete de S.B. e; Furtado, Valdenir V. [Sao Paulo Univ., SP (Brazil). Inst. Oceanografico. Dept. de Oceanografia Quimica e Geologica

2002-07-01

Submarine groundwater discharge (SGD) and recycled seawater can provide chemical constituents to coastal zone, representing an important material flux pathway from land to sea in some areas. Geochemical tracers, like {sup 222} Rn and {sup 226} Ra, are advantageous for regional-scale assessment of SGD, because their signals represent values integrated through the water column that removes small-scale variations. These radionuclides are usually enriched in groundwater compared to seawater, can be measured at very low concentrations and are conservative. This work reports preliminary results of a study carried out in a series of small embayements of Ubatuba, Sao Paulo State-Brazil, covering latitudes between 23 deg 26{sup '}S and 23 deg 46{sup '}S and longitudes between 45 deg02{sup '}W and 45 deg 11{sup '}W. The main aims of this research were to set up an analytical method to assess {sup 222} Rn and {sup 226} Ra activities in seawater samples and to apply the excess {sup 222} Rn inventories obtained to estimate the submarine groundwater discharge. Measurements made during 2001/2002 included {sup 222} Rn and {sup 226} Ra in seawater, {sup 222} Rn in sediment, seawater and sediment physical properties. (author)

Spare nonlinear systems resolution; its applicability in the resolution of the problem related power flow in electric power networks; Resolucao de sistemas nao-lineares esparsos; sua aplicacao na resolucao do problema de fluxo de carga em redes de energia eletrica

Energy Technology Data Exchange (ETDEWEB)

Duran, Ana Cecilia

1990-03-01

This thesis aims to find a better way to solve large scale nonlinear sparse system problems giving special emphasis to load flow in electric power networks. The suggested algorithms are presented 63 refs., 28 figs., 16 tabs.

Preparation and characterization of Nafion - TiO{sub 2} composite electrolytes for application in proton exchange membrane fuel cells; Preparacao e caracterizacao de eletrolitos compositos Nafion - TiO{sub 2} para aplicacao em celulas a combustivel de membrana de troca protonica

Energy Technology Data Exchange (ETDEWEB)

Matos, Bruno Ribeiro de

2008-11-06

The fabrication and characterization of Nafion - TiO{sub 2} composites, and the use of such electrolytes in PEM (Proton Exchange Membrane) fuel cell operating at high temperature (130 deg C) were studied. The operation of a PEM fuel cell at such high temperature is considered as an effective way to promote fast electrode reaction kinetics, high diffusional transport, and high tolerance to the carbon monoxide fuel contaminant. The polymer Nafion{sup R} is the most used electrolyte in PEM fuel cells due to its high proton conductivity. However, the proton transport in Nafion is dependent on the water content in the polymeric membrane. The need of absorbed water in the polymer structure limits the operation of the fuel cell to temperatures close to 100 deg C, above which Nafion exhibits a fast decrease of the ionic conductivity. In order to increase the performance of the electrolyte operating at high temperatures, Nafion-TiO{sub 2} composites have been prepared by casting. The addition of titania hygroscopic particles to the polymeric matrix aims at the enhancement of the humidification of the electrolyte at temperatures above 100 deg C. Three types of titania particles with different specific surface area and morphology have been investigated. Nafion-based composites with the addition of titania nanoparticles, in the 2.5-15 wt.% range, with nearly spherical shape and specific surface area up to approx. 115 m{sup 2}g{sup -1} were found to have higher glass transition temperature than the polymer. Such an increase improves the stability of the electrolyte during the fuel cell operation at high temperatures. The addition of titania-derived nanotubes results in a pronounced increase of the performance of PEM fuel cell operating at 130 deg C. In this composite, the high specific surface area and the tubular shape of the inorganic phase are responsible for the measured increase of both the absorption and retention of water of the composite electrolyte. Nonetheless, the polarization curves of fuel cell using the composite electrolytes exhibited an increase of the ohmic polarization associated with the addition of the insulating titania particles. As the chemical structure of Nafion was observed to be insensitive to the addition of the inorganic particles, the high performance of the composite electrolytes is a result of competing effects: the decrease of the electrical conductivity and a higher thermal stability or water absorption/retention capacity. The experimental results suggest that the Nafion-TiO{sub 2} composites are promising electrolytes for PEM fuel cells operating at temperatures above approx. 100 deg C. (author)

Application of FMEA-DEA (Failure Modes and Effect Analysis - Data Envelopment Analysis) to the air conditioning system of the control room a nuclear power plant; Aplicacao de FMEA-DEA ao sistema de ar condicionado da sala de controle de uma usina nuclear

Energy Technology Data Exchange (ETDEWEB)

Barbosa, Junior, Gilberto Varanda

2007-03-15

This dissertation presents the FMEA-DEA analysis application to the air conditioning system of the control room of a nuclear power plant. After obtaining the failure modes, the index associated to the occurrence probability, the severity of the effects and the potential of detention, a priority order is established for the failure modes or deviations. This number is obtained by multiplying the three mentioned index that vary in a natural scale from 1 to 10, where the higher the index, the more critical the situation will be. In this work, it is intended to use a model based on the data envelopment analysis, DEA jointly with the FMEA, to identify the current efficiency of the system and which failure modes or deviations are considered more critical, and by means of the weights attributed for the mathematical modeling to identify which index are contributing more for these deviations. From this identification, improvements can be set, which may consider administrative changes, operator training and so on, thus adding value to the final product. (author)

Study and characterization of ceramic materials from natural origin for application in jewellery design using laser texturing as innovation; Estudo e caracterizacao de materiais ceramicos de origem natural para aplicacao no design de joias utilizando a texturizacao a laser como diferencial de inovacao

Energy Technology Data Exchange (ETDEWEB)

Elesbao, T.R.; Carus, L.A.; Tabarelli, A.C.; Vieira, R.P.; Takimi, A.S., E-mail: taianeelesbao@hotmail.com [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Departamento de Materiais

2012-07-01

Technological development has been largely responsible for changes in the jewelry market. Seeking to contribute to the development of new products, this study analyzed the technique of laser texturing, aiming to add commercial and aesthetic values to the mother of pearl, material used in the jewelry field. The methodology was divided into physico-chemical characterization of the mother-of-pearl and of the resulting residue of laser texturing and analysis of the interaction of laser with the surface of the mother-of-pearl. The characterizations carried out were: Infrared spectroscopy, X-ray diffraction, thermogravimetric analysis and scanning electron microscopy. Results indicate that the studied material is composed mainly by the aragonite crystal phase, different from that resulting residue from texturing process. Although the process remove some of the gem material, the effect water characteristic of the mother-of-pearl is maintained, suggesting that technology combined with research and design can increase the value of this material. (author)

Viability evaluation of the reading system by CCD for application at the Fricke xylenol gel dosimetry developed by IPEN-Sao Paulo, Brazil; Avaliacao de viabilidade do sistema de leitura por CCD para aplicacao na dosimetria Fricke xilenol gel desenvolvido no IPEN-Brasil

Energy Technology Data Exchange (ETDEWEB)

Mangueira, Thyago Fressatti; Dias, Daniel Menezes; Campos, Leticia Lucente, E-mail: thyagomangueira@usp.b, E-mail: dmdias@ipen.b, E-mail: lcrodri@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2009-07-01

The use of chambers with coupled charge devices - CCD, is already used by research centres for the dose evaluation applying the Fricke xylenol gel dosemeter. This work evaluates the application of this optical reading technique for the FXG developed at the IPEN, Sao Paulo, Brazil

Application of the Life-Cycle Cost Analysis (LCCA) for established of energy efficiency standards: refrigerators sold in Brazil; Aplicacao da metodologia de analise do custo do ciclo de vida (ACCV) para o estabelicimento de padroes de eficiencia energetica: refrigeradores comercializados no Brasil

Energy Technology Data Exchange (ETDEWEB)

Silva Junior, Herculano Xavier da; Jannuzzi, Gilberto de Martino [Universidade Estadual de Campinas (UNICAMP), SP (Brazil); Queiroz, Guilherme de Castilho [Centro de Tecnologia de Embalagens (CETEA), Campinas, SP (Brazil)

2006-07-01

The goal of this paper is to present the work in the thesis developed by Silva Jr. (2005) who discusses the application of the methodologies of Life Cycle Cost Analysis (LCCA) as a tool to propose energy efficiency standards, additional to the voluntary labels already existing in the one-door Brazilian refrigerators. Another objective is to study the role of these instruments (energy efficiency labels and standards and environmental labels) as means to supply technical subsidies for the establishment of maximum level of electric energy consumption and environmental quality impact for electrical equipment in Brazil. The LCCA methodology allows to evaluate the impacts of the energy efficiency increasing in electrical equipment, resulting in important saving (energy, financial, carbon dioxide emissions avoided etc.) for the country and its citizens. The results reached in this studies offer important data to subsidize deep discussions with manufacturers and the government to stipulate minimum energy efficiency standards for the Brazilian refrigerators. Thus, with increase of 28,1% on the energy efficiency of the one-door Brazilian refrigerators in 2008 to reach a values of savings that can be in order of 54,63 TWh (with respective reduction of demand power of 208 MW), of US$ 6,23 Billions of Dollar (R$ 17,2 Billions of Reais) of reduction in the account of electric energy for the population and of approximately 22 billions of tons of CO{sub 2} not emitted on the environment after 30 years of the implantation of standard. These values, that can not be despised by government, manufacturers and consumers. One other interest of this work is to start the discussion, the possibility of the creation of environmental labelling (e.g., Green Seal - USA, Eco-label - EU etc.) that is an additional program/methodology, which, it may be utilized as support for development of technologies and for the increase of energy and environmental efficiency of the electric equipment. These labels are strategically important for Brazil to amplify the environmental programs to their products because they can facilitate the insertion of these products in the international market, at the same time, that the country gets in the increase of the quality (environmental etc.) and promotes the sustainable development around the world. (author)

Application of the microbiological method DEFT/APC and DNA comet assay to detect ionizing radiation processing of minimally processed vegetables; Aplicacao do metodo microbiologico DEFT/APC e do teste do cometa na deteccao do tratamento com radiacao ionizante de hortalicas minimamente processadas

Energy Technology Data Exchange (ETDEWEB)

Araujo, Michel Mozeika

2008-07-01

Marketing of minimally processed vegetables (MPV) are gaining impetus due to its convenience, freshness and apparent healthy. However, minimal processing does not reduce pathogenic microorganisms to safe levels. Food irradiation is used to extend the shelf life and inactivation of food-borne pathogens, Its combination with minimal processing could improve the safety and quality of MPV. Two different food irradiation detection methods, a biological, the DEFT/APC, and another biochemical, the DNA Comet Assay were applied to MPV in order to test its applicability to detect irradiation treatment. DEFT/APC is a microbiological screening method based on the use of the direct epi fluorescent filter technique (DEFT) and the aerobic plate count (APC). DNA Comet Assay detects DNA damage due to ionizing radiation. Samples of lettuce, chard, watercress, dandelion, kale, chicory, spinach, cabbage from retail market were irradiated O.5 kGy and 1.0 kGy using a {sup 60} Co facility. Irradiation treatment guaranteed at least 2 log cycle reduction for aerobic and psychotropic microorganisms. In general, with increasing radiation doses, DEFT counts remained similar independent of irradiation processing while APC counts decreased gradually. The difference of the two counts gradually increased with dose increment in all samples. It could be suggested that a DEFT/APC difference over 2.0 log would be a criteria to judge if a MPV was treated by irradiation. DNA Comet Assay allowed distinguishing non-irradiated samples from irradiated ones, which showed different types of comets owing to DNA fragmentation. Both DEFT/APC method and DNA Comet Assay would be satisfactorily used as a screening method for indicating irradiation processing. (author)

XRD (X-Ray Diffraction) and nitrogen adsorption characterization of Ni-Pt/mordenite catalysts; Caracterizacao por EDX (Espectrometria de Raios-X), DRX (Difracao de Raios-X) e adsorcao de nitrogenio de catalisadores Ni/Pt/mordenita visando sua aplicacao na isomerizacao de n-hexano

Energy Technology Data Exchange (ETDEWEB)

Martins, Geovana do Socorro V.; Sousa, Bianca V.; Rodrigues, Meiry Glaucia F. [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

2008-07-01

The search for molecules of high octane arose great interest in the isomerization processes. Catalysts to the zeolite base have been wide developed for the n-paraffins isomerization. In this work, bimetallic bifunctional catalysts supported on Mordenite zeolite were prepared samples containing 60Pt40Ni (wt.%) metal (Pt). The catalysts were obtained by competitive ion exchange using aqueous solutions of [Pt(NH{sub 3}){sub 4}]Cl{sub 2} and Ni(NH{sub 3}){sub 6}]Cl{sub 2} complexes. The EDS characterization analyses showed incorporation of the nickel and platinum mordenite zeolite. The diffractograms showed competitive ion exchange and calcination processes did not provoke appreciable changes in the zeolitic support framework. The peaks attributed to nickel and platinum oxides was possible to observe in the bimetallic catalysts 60Ni40Pt/MOR. The results of the N{sub 2} physical adsorption of the 60Ni40Pt/MOR showed that it did not have modification in the superficial area of the catalysts. (author)

Preparation of PtSnCu/C and PtSn/C electrocatalysts and activation by dealloying processes for ethanol electrooxidation; Preparacao de eletrocatalisadores PtSnCu/C e PtSn/C e ativacao por processos de dealloying para aplicacao na oxidacao eletroquuimica do etanol

Energy Technology Data Exchange (ETDEWEB)

Crisafulli, Rudy

2013-06-01

PtSnCu/C (with different Pt:Sn:Cu atomic ratios) and PtSn/C (50:50) electrocatalysts were prepared by borohydride (BR) and alcohol-reduction (AR) processes using H{sub 2}PtCl{sub 6}.6H{sub 2}O, SnCl{sub 2}.2H{sub 2}O and CuCl{sub 2}.2H{sub 2}O as metal sources, NaBH{sub 4} and ethylene glycol as reducing agents, 2-propanol and ethylene glycol/water as solvents and carbon black as support. In a further step, these electrocatalysts were activated by chemical (CD) and electrochemical (ED) dealloying processes through acid treatment and thin porous coating technique, respectively. These materials were characterized by energy dispersive X-ray, Xray diffraction, transmission electron microscopy, line scan energy dispersive Xray and cyclic voltammetry. Electrochemical studies for ethanol electro-oxidation were performed by cyclic voltammetry, chronoamperometry and in single Direct Ethanol Fuel Cell using Membrane Electrode Assembly (MEA). The anodic effluents were analysed by gas chromatography. The X-ray diffractograms of the as-synthesized electrocatalysts showed the typical face-centered cubic structure (FCC) of platinum and its alloys. After dealloying, the X-ray diffractograms showed that the Pt FCC structure was preserved. The crystallite sizes of the assynthesized electrocatalysts were in the range of <=2 nm to 3 nm and after dealloying there were no significant variations in sizes. The energy dispersive Xray analysis of the as-synthesized electrocatalysts showed a Pt:Sn and Pt:Sn:Cu atomic ratios similar to the nominal values. After chemical and electrochemical dealloying of the electrocatalysts the ranged Pt:Sn and Pt:Sn:Cu atomic ratios showed that Cu and Sn atoms were removed. However, chemical dealloying process proved to be more efficient for removing Cu and electrochemical dealloying for removing Sn. The line scan energy dispersive X-ray analysis showed that acid and electrochemical treatments were efficient to dealloying Cu and/or Sn superficial atoms of the FCC structure of Pt. The results obtained by cyclic voltammetry and chronoamperometry showed that electrocatalysts containing 30 at % or more of platinum, after chemical and electrochemical dealloying had significant improvement in electrocatalytic activity for ethanol electro-oxidation in the potential of interest. The electrocatalysts with higher efficiency for electrochemical oxidation of ethanol were PtSn/C (50:50) BR/ED > PtSnCu/C (50:40:10) AR/ED > PtSnCu/C (50:10:40) BR/CD. PtSn/C (50:50) BR/CD, PtSnCu/C (50:10:40) BR/CD, PtSnCu/C (50:40:10) AR/CD electrocatalysts and Pt/C BASF, PtSn/C (75:25) BASF commercial electrocatalysts were tested in single Direct Ethanol Fuel Cell. The results showed the following performance for ethanol electro-oxidation: PtSn/C (50:50) BR/CD > PtSnCu/C (50:40:10) AR/CD > PtSnCu/C > PtSn/C (75:25) BASF > PtSnCu/C (50:10:40) BR/CD > Pt/C BASF. (author)

Study of the YBa{sub 2}Cu{sub 3}O-7{sub -{delta}} superconductor application as a low magnetic field sensor; Estudo da aplicacao do supercondutor YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} como sensor de baixo campo magnetico

Energy Technology Data Exchange (ETDEWEB)

Oliveira, G L; Shigue, C Y; Santos, C A.M. dos; Machado, A J [Faculdade de Engenharia Quimica de Lorena (Faenquil), SP (Brazil). Dept. de Engenharia de Materiais

2000-07-01

It has been proposed in the literature a new regime for high critical temperature superconductors labeled as thermally activated flux flow (TAFF). This regime presents a state in which vortex dynamic exhibit a ohmic behavior. The resistivity in this regime is proportional to the applied magnetic field for small current densities. Materials showing this behavior have high disordering and present semiconductor behavior in normal state with broad transition temperature. In this work is presented a systematic study of the magnetoresistance as a function of the applied magnetic field for polycrystalline samples with several thickness. Results of X ray diffraction, resistivity as a function of the temperature, I-V characteristic curves and magnetoresistance are showed. Finally is proposed a calibration curve of the magnetoresistance as a function of the magnetic field, that show the possibility of its use as magnetic field sensor. (author)

Application of the Particle Swarm Optimization (PSO) technique to the thermal-hydraulics project of a PWR reactor core in reduced scale; Aplicacao da tecnica de otimizacao por enxame de particulas no projeto termo-hidraulico em escala reduzida do nucleo de um reator PWR

Energy Technology Data Exchange (ETDEWEB)

Lima Junior, Carlos Alberto de Souza

2008-09-15

The reduced scale models design have been employed by engineers from several different industries fields such as offshore, spatial, oil extraction, nuclear industries and others. Reduced scale models are used in experiments because they are economically attractive than its own prototype (real scale) because in many cases they are cheaper than a real scale one and most of time they are also easier to build providing a way to lead the real scale design allowing indirect investigations and analysis to the real scale system (prototype). A reduced scale model (or experiment) must be able to represent all physical phenomena that occurs and further will do in the real scale one under operational conditions, e.g., in this case the reduced scale model is called similar. There are some different methods to design a reduced scale model and from those two are basic: the empiric method based on the expert's skill to determine which physical measures are relevant to the desired model; and the differential equation method that is based on a mathematical description of the prototype (real scale system) to model. Applying a mathematical technique to the differential equation that describes the prototype then highlighting the relevant physical measures so the reduced scale model design problem may be treated as an optimization problem. Many optimization techniques as Genetic Algorithm (GA), for example, have been developed to solve this class of problems and have also been applied to the reduced scale model design problem as well. In this work, Particle Swarm Optimization (PSO) technique is investigated as an alternative optimization tool for such problem. In this investigation a computational approach, based on particle swarm optimization technique (PSO), is used to perform a reduced scale two loop Pressurized Water Reactor (PWR) core, considering 100% of nominal power operation on a forced flow cooling circulation and non-accidental operating conditions. A performance comparison between GA and PSO techniques is performed as it's obtained results to this problem. Obtained results shows that the proposed optimization technique (PSO) is a promising tool for a reduced scale experiments or equipment design, presenting advantages over other techniques. (author)

Modelling and application of modern control techniques to governor and voltage regulator systems of synchronous machines of small hydroelectric power plants; Modelagem e aplicacao de tecnicas de controle moderno a sistemas reguladores de velocidade e tensao de maquinas sincronas de pequenas centrais hidreletricas

Energy Technology Data Exchange (ETDEWEB)

Silva, Claudio Homero Ferreira da

2002-07-01

In small hydroelectric plants the control system is quite simplified. It is sometimes mounted in a primitive and archaic way although it is functional. Performance of this system determines the final quality of the energy, stability and physical integrity of the apparatus as well as the whole electric system. Based on the present situation of the electric system, it is noticed a tendency in building and modernizing early small hydroelectric plants in order to increase energy supply very fast with low cost and satisfying environmental constraints. The development of mathematical tools and digital computer facilities have made possible the use of advanced automatic control structures that take into account the process stability even in presence of noise measurement and plant/model mismatch. Physical modifications in the plant are proposed in order to provide significant improvement in closed loop behaviour of the turbine speed and terminal voltage control. The decision ability and flexibility of the computer package to be developed are the major aspects that support this research. It will be intended to incorporate this control computer package into programmable logical controller. Experimental data from CEMIG's Martins Hydro Plant (4 x 2750 KVA), located in Uberlandia, Brazil, were used to identify and validate the system model. Pole placement, optimal control and model predictive control techniques were used to controller design. Perfect modeling and plant/model mismatch were considered in both presence and absence of state observers (full order and reduced order) in order to become accessible unmeasured states. Simulation results show developed controllers are promising for the system regulating. The proposed approaches offer a larger control flexibility taking into account plant/model mismatch and stability questions. These results contribute to a quality energy improvement associated to a cost reduction in energy generation process. (author)

Alteration in the absorption cell dose arising from the use of gold nanoparticle associated with the radionuclides of clinical application: simulate study; Alteracao na absorcao de dose celular decorrente da utilizacao de nanoparticulas de ouro associadas a radionuclideos de aplicacao clinica: estudo simulado

Energy Technology Data Exchange (ETDEWEB)

Culik, Lucas; Schwarcke, Marcelo, E-mail: mschwarcke@unifra.br [Centro Universitario Franciscano (UNIFRA), Santa Maria, RS (Brazil)

2015-12-15

The present work is a proposal to assess, which is the efficiency in the use of radionuclides of clinical application in nuclear medicine service conjugated system with gold nanoparticles.To obtain the results needed for the interpretation of this combination, was using the Monte Carlo simulation code PENELOPE, where was the main structures of a simulated eukaryote cell. To simulate irradiation on cellular structures was used the emission spectrum of main radionuclide clinical use in nuclear medicine service. The material containing gold nanoparticles was modeled according the stoichiometric proportions found in the literature. The results obtained, present for the simulated energies to smaller bodies than 2,0μm, no substantial response to the use of nanoparticles in the reinforcement of locally absorbed dose. Is observed a small decrease in locally dose absorbed due to emission of charged particles, it is believed that causes an increase in the emission secondary range to be placed outside the study body. But this effect is small when comparing to the increase of energy absorbed due to interaction with the bodies containing nanoparticles, so demonstrating an increase in the locally dose absorbed. Being observed that there is an increase in dose absorbed locally due to the use of nanoparticles. For protocols based on the principle of target radionuclide therapy, the imaging of the treaty sit will be affected in their statistical accuracy, since the gamma radiation will be attenuated by the nanoparticles present in the material. Being necessary to know if this increase in the locally absorbed dose has greater importance in the treatment protocol than the image of the absorption of the radioactive material in the target organ. (author)

Decision making process in oil exploration and production projects: a systemic approach by means of fuzzy logic theory application; Processo de tomada de decisao em projetos de exploracao e producao de petroleo: uma abordagem sistemica com aplicacao da teoria de logica fuzzy

Energy Technology Data Exchange (ETDEWEB)

Brana, Juan Pablo

2008-12-15

Oil is a non-renewable resource and maximizing the efficiency of its use is of the utmost importance, not only to private companies and the generation of their profit, but also to governments and their energy, economic and territorial planning. The aims of this thesis are, on the one hand, to breakdown, by means of a systemic approach, the complexity of the decision-making process in oil exploration and production projects (E and P), explaining, whenever possible, the theories and relationships that underlie their modeling contexts, and, on the other, to create a model - in the case of a specific E and P problem - to support the decision-making process, using the fuzzy logic theory. The variables analyzed include the probability of the exploration process achieving success, the size of reserves, the level or burden of taxation and the price of oil. In the case of the latter, the price of oil, the elements necessary for the elaboration of different scenarios have been provided. Finally, this model has been applied to a case study, providing continuity to previous work and discussing the results obtained. (author)

Application of the method ELECTRE II (Elimination and Choice Translating Algorithm) to support the customers order in liquefied petroleum gas distributors; Aplicacao do metodo ELECTRE II (Elimination and Choice Translating Algorithm) na ordenacao de clientes em uma distribuidora de gas liquefeito do petroleo

Energy Technology Data Exchange (ETDEWEB)

Sobral, Marcos Felipe Falcao; Costa, Ana Paula Cabral Seixas [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil)

2008-07-01

The objective of this study is to promote the use of multi criteria decision method ELECTRE II to support the customers order in liquefied petroleum gas distributors, located in the Northeast of Brazil. The company has difficulties to rank the customers their factory, causing various difficult related like reduction of performance indicators and high costs with extra-hours. Finally, is presented a results comparison obtained by the method with the current results, performing a utilization viability analysis of method for this problem. (author)

Quantification and location of emergency service mobile units and the failures in electric power distribution networks: application of hypercube model; Quantificacao e locacao de unidades moveis de atendimento de emergencia a interrupcoes em redes de distribuicao de energia eletrica: aplicacao do modelo hipercubo

Energy Technology Data Exchange (ETDEWEB)

Albino, Jean Carlo de Campos

1994-11-01

The basic hypercube queuing model, as well its approximated version, are normally used to analyze public emergency systems`performance. Both models, however, can be used only when the system has no geographical limitation of its Emergency Mobile Units (EMU), i.e, in systems in which the region`s atoms can be attended by any EMU, meaning that each EMU can over the entirety of the analysed region. In systems that does not present this property, one could only use simulation techniques. This paper presents an adaptation of the basic hypercube model that was developed for cases of urban emergency systems in which the EMU`s are not allowed or not worthwhile to cover the entire region. This adapted version is called Limited Hypercube Model (LHM). Modifications have been made in several steps of the basic model, and has brought a new analysis perspective, by amplifying the hypercube`s application universe and allowing mathematical description of some limited systems` specific features. The LHM was applied to analyze an electric energy distribution public service at Florianopolis, and the results are discussed in the paper. (author) 12 refs., 11 figs., 14 tabs.

Comparative study of smear layer removal by different etching modalities and Er:YAG laser irradiation on the root surface: a scanning electron microscopy study; Estudo comparativo, atraves de microscopia eletronica de varredura, da acao de diferentes substancias quimicas e do laser de Er:YAG, na remocao de smear layer, em superficies radiculares submetidas a raspagem e aplainamento

Energy Technology Data Exchange (ETDEWEB)

Theodoro, Leticia Helena

2001-07-01

The aim of this study was to compare the effects of citric acid, EDTA, citric acid with tetracycline, and Er:YAG laser to smear layer removal on the root surface after scaling with manual instruments by SEM. Thirty specimens (n=30) of root surface before scaling were divided into 6 groups (n=5). The Control Group (G1) was not treated; Group 2 (G2) was conditioned with citric acid gel 24%, pH1, during 2 minutes; Group 3 (G3) was conditioned with EDTA gel 24%, pH 7, during 2 minutes; Group 4 (G4) was conditioned with citric acid and tetracycline gel 50%, pH1 during 2 minutes; Group 5 (G5) was irradiated with Er:YAG laser (2.94 {mu}m), 47 mJ/10 Hz, focused, under water spray during 15 seconds and fluence of 0.58 J/cm{sup 2}; Group 6 (G6) was irradiated with Er:YAG laser (2.94{mu}m), 83 mJ/10 Hz, focused, under water spray during 15 seconds and fluence of 1.03 J/cm{sup 2}. The micrographic were analyzed by scores and following the statistical analysis with Kruskal Wallis (p<0.05) H=20,31. The G1 was significantly different of all groups (28.0); the G2 (13.4), G3 (11.7), and G4 (13.6) showed no difference in relation to G5 (20.3) and G6 (6.0), but the G6 was significantly different from G5. From the results, it can be conclude that: 1) there was intensity smear layer after scaling and root planing; 2) all treatments were effective to smear layer remove with significantly difference to G2, G3, G4, G5 and G6; G2, G3 and G4 were not statistically different from G5 and G6; 3) G6 was more effective in the smear layer remotion in relation to G5 and both presented irregular root surface. (author)

Cross sections of electron loss and capture for beams of O{sup +} in water vapor from the energy range of 0,2 to 1,2 MeV; Secoes de choque de perda e captura eletronica para feixes de O{sup +} em vapor de agua em uma faixa de energia entre 0,2 e 1,2 MeV

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Vitor Jesus de

2015-06-01

The study of the interactions between atoms and molecules is important for the knowledge of the cross sections of the processes that contribute to the deposition of energy by charged particle beams used in radiotherapy planning and transport particle simulation codes. Heavy ions, such as oxygen, induce many cellular and molecular damages in human cells.as a result of interaction between the projectile and atoms and molecules. The use of proton and carbon as the projectile interacting with water molecules is well characterized, however there are few studies with oxygen ions. In this work we are interested in the study of electron loss (projectile ionization) and electron capture with charge state 1+. The Pelletron accelerator of 1.7 MeV from the Federal University of Rio de Janeiro housed in the Atomic and Molecular collisions Laboratory (LACAM) has been used, which can accelerate atomic and molecular ions up to speeds of the order of hundredths of light speed, and consists of the source of negative ions, the Wien filter, the accelerator itself and the magnet load selector. The detection device used to evaluate the processes of interaction (capture and loss) between the beam of the O{sup +} and the water molecule is a Microchannel Plate (MCP) at the position sensitive anode. The collisions of O{sup +} beans are being studied in the range of 0.2 to 1.2 MeV with water vapor (Z = 10). Were obtained the respective absolute cross sections for electron loss and electron capture and compared with the cross sections of the molecule methane (CH4 → Z = 10), the isoelectronic water molecule. The experimental results show an agreement between the measurements with water and methane. Comparisons were made with results of theoretical models for electron loss using the 'Free Collision Model' and for capture the Bohr and Lindhard model. The theoretical results for electron loss show an agreement of experimental data with the model used. The model of Bohr and Lindhard describes well the experimental results for electron capture for low speeds, however overestimates for intermediate speeds υ = υ{sub 0}. (author)

Evaluation in vitro of effects of Er:YAG and Nd:YAG lasers irradiation on root canal wall, by stereoscopy, scanning electron micrography and thermographic camera; Avaliacao in vitro dos efeitos da irradiacao laser de Er:YAG e Nd:YAG na parede dentinaria do canal radicular, sob observacao do estereoscopio, da micrografia eletronica e da camera termografica

Energy Technology Data Exchange (ETDEWEB)

Goya, Claudia

2001-07-01

This study was carried out to evaluate in vitro the effects of Nd:YAG laser and Er:YAG laser irradiation in the root canal wall by SEM, evaluating the apical leakage and the temperature changes during the laser irradiation. Seventy four extracted human teeth were used, they were instrumented and divided into seven groups of 10 teeth each. The teeth were evaluated through stereoscopy, by SEM, and with the thermographic camera. The Nd:YAG laser irradiation parameters were 100 mJ/p, 15 Hz, and Er:YAG laser were 160 mJ/p and 10 Hz, the irradiation was 4 times at 2 mm/sec speed, with 20 sec interval. The apical leakage was not observed in the teeth irradiated by Nd:YAG laser alone or in association with Er:YAG laser. However in the teeth irradiated only by the Er:YAG laser we observed a little leakage. By SEM observation the Nd:YAG laser irradiation showed melting and recrystallization in the dentin surface closing dentinal tubules, and in the samples irradiated by Er:Y AG laser a clean surface, opened dentinal tubules, and the combination by two lasers, showed melting covering some dentinal tubules The thermographic study found the temperature increase was not more than 6 deg C. This study showed the safety parameters applications of Er:YAG laser in association with Nd:YAG laser in root canal treatment, in order to not cause thermal damages to the periodontal tissues. (author)

Piezoresponse force microscopy of ferroelectric relaxors =

Science.gov (United States)

Kiselev, Dmitry

Nesta tese, ferroelectricos relaxor (I dont know uf the order is correct) de base Pb das familias (Pb,La)(Zr,Ti)O3 (PLZT), Pb(Mg1/3,Nb2/3)O3-PbTiO3 (PMN-PT), Pb(Zn1/3,Nb2/3)O3-PbTiO3 (PZN-PT) foram investigados e analisados. As propriedades ferroelectricas e dielectricas das amostras foram estudadas por metodos convencionais de macro e localmente por microscopia de forca piezoelectrica (PFM). Nos cerâmicos PLZT 9.75/65/35 o contraste da PFM a escala nanometrica foi investigado em funcao do tamanho e orientacao dos graos. Apurou-se que a intensidade do sinal piezoelectrico das nanoestruturas diminui com o aumento da temperatura e desaparece a 490 K (La mol. 8%) e 420 K (9,5%). Os ciclos de histerese locais foram obtidos em funcao da temperatura. A evolucao dos parâmetros macroscopicos e locais com a temperatura de superficie sugere um forte efeito de superficie nas transicoes de fase ferroelectricas do material investigado. A rugosidade da parede de dominio e determinada por PFM para a estrutura de dominio natural existente neste ferroelectrico policristalino. Alem disso, os dominios ferroelectricos artificiais foram criados pela aplicacao de pulsos electricos a ponta do condutor PFM e o tamanho de dominio in-plane foi medido em funcao da duracao do pulso. Todas estas experiencias levaram a conclusao de que a parede de dominio em relaxors do tipo PZT e quase uma interface unidimensional. O mecanismo de contraste na superficie de relaxors do tipo PLZT e medido por PFMAs estruturas de dominio versus evolucao da profundidade foram estudadas em cristais PZN-4,5%PT, com diferentes orientacoes atraves da PFM. Padroes de dominio irregulares com tamanhos tipicos de 20-100 nm foram observados nas superficies com orientacao das amostras unpoled?. Pelo contrario, os cortes de cristal exibem dominios regulares de tamanho micron normal, com os limites do dominio orientados ao longo dos planos cristalograficos permitidos. A existencia de nanodominios em cristais com orientacao

Investigation of barium-calcium aluminate process to manufacture and characterize impregnated thermionic cathode for power microwave devices; Investigacao do processo de obtencao de aluminatos de bario e calcio para construcao e caracterizacao de catodos termionicos impregnados para aplicacao em dispositivos de microondas de potencia

Energy Technology Data Exchange (ETDEWEB)

Higashi, Cristiane

2006-07-01

In the present work it is described the barium calcium aluminate manufacture processes employed to produce impregnated cathodes to be used in a traveling-wave tube (TWT). The cathodes were developed using a tungsten body impregnated with barium and calcium aluminate with a 5:3:2 proportion (molar). Three different processes were investigated to obtain this material: solid-state reaction, precipitation and crystallization. Thermal analysis, thermogravimetry specifically, supported to determine an adequate preparation procedure (taking into account temperature, time and pyrolysis atmosphere). It was verified that the crystallization showed a better result when compared to those investigated (solid-state reaction and precipitation techniques - formation temperature is about 1000 deg C in hydrogen atmosphere), whereas it presented the lower formation temperature (800 deg C) in oxidizing atmosphere (O{sub 2}). It was used the practical work function distribution theory (PWFD) of Miram to characterize thermionic impregnated cathode. The PWFD curves were used to characterize the barium-calcium aluminate cathode. PWFD curves shown that the aluminate cathode work function is about 2,00 eV. (author)

Synthesis and characterization of Ce{sub 1-x}SmXO{sub 2-(x/2)} as solid electrolyte for application in IT-SOFCs; Sintese e caracterizacao de Ce{sub 1-x}SmXO{sub 2-(x/2)} como eletrolito solido para aplicacao em IT-SOFCs

Energy Technology Data Exchange (ETDEWEB)

Nicodemo, J.P.; Martinelli, A.E.; Nascimento, R.M. [Universidade Federal do Rio Grande do Norte (DECM/UFRN), Natal, RN (Brazil). Dept. de Engenharia de Materiais], e-mail: juli_pivotto@yahoo.com.br; Melo, D.M.A. [Universidade Federal do Rio Grande do Norte (DQ/UFRN), Natal, RN (Brazil). Dept. de Quimica; Cela, B. [Universidade Federal do Rio Grande do Norte (PPGCEM/UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Macedo, D.A. [Universidade Federal do Rio Grande do Norte (PPGEM/UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica

2008-07-01

Mixed rare earth doped CeO{sub 2} oxide-based have been extensively studied for use in solid electrolytes for fuel cells. Ceramics-based CeO{sub 2} have high ionic conductivity and enable the operation of solid oxide fuel cells (SOFCs) in intermediate temperatures, in the range of 500 to 750 deg C. In this work, was investigated the Sm{sub 2}O{sub 3} doped CeO{sub 2} by Pechini method to obtain Ce{sub 0,9}Sm{sub 0,1}O{sub 1,95}. The resulting powders were characterized by the chemical composition (EDS) and crystallographic (XRD), thermal analysis (TG/ATD and DTG), and particles morphology (SEM). After calcinations of 500 and 700 deg C for 2 hours were obtained nanosized powders with crystalline structure of cubic phase type fluorite fully formed. (author)

Application of PtSn/C catalysts and Nafion SiO{sub 2} membranes in direct ethanol fuel cell at high temperatures; Aplicacao de catalisadores PtSn/C e membranas Nafion SiO{sub 2} em celulas a combustivel de etanol direto em elevadas temperaturas

Energy Technology Data Exchange (ETDEWEB)

Dresch, Mauro Andre

2014-07-01

This work has as objective to evaluate anodes and electrolytes in direct ethanol fuel cells (DEFC) operating at high temperature (130 deg C). As anode materials, electrocatalysts based on Pt Sn/C were prepared by Modified Polyol Method with various Pt:Sn atomic ratios. Such methodology promotes self organized electrocatalysts production with narrow particle size distribution and high alloying degree. The electrocatalysts were characterized by XRD, and CO stripping. The results showed that these materials presented high alloying degree and Eonset CO oxidation at lower potential as commercial materials. As electrolyte, Nafion-SiO{sub 2} hybrids were synthesized by sol-gel reaction, by the incorporation of oxide directly into the ionic aggregates of various kinds of Nafion membranes. The synthesis parameter, such sol-gel solvent, membrane thickness and silicon precursor concentration were studied in terms of silica incorporation degree and hybrid mechanical stability. Finally, the optimized anodes and electrolytes were evaluated in DEFC operating at 80 - 130 deg C temperature range. The results showed a significant improvement of the DEFC performance (122 mW cm{sup -2}), resulted from the acceleration of ethanol oxidation reaction rate due to anode material optimization and high temperature operation once the use of hybrids possibilities the increase of temperature without a significant conductivity loses. In this sense, the combination of optimized electrodes and electrolytes are a promising alternative for the development of these devices. (author)

Application of the Rb-Sr, Pb-Pb and Sm-Nd systems on the Salobe 3A polymetallic deposit, Carajas Mineral Province, Para, Brazil; Aplicacao dos sistemas Rb-Sr, Pb-Pb e Sm-Nd do deposito polimetalico do Salobo 3A, Provincia Mineral de Carajas, Para

Energy Technology Data Exchange (ETDEWEB)

Mellito, Katia Maria

1998-07-01

The Salobo 3A polymetallic Cu (Au-Mo-Ag) deposit, located in the northern part of the Carajas Mineral Province, Para, consists of a metavolcano-sedimentary sequence represented by iron formation, amphibolite, schist and quartzite of the Igarape Salobo Group. This rock sequence rest uncomformably on the gneissic basement of the Xingu Complex. The copper mineralization hosted by iron formation consists of bornite-chalcocite and bornite-chalcopyrite disseminations associated with magnetite. The geochronological data determined through the application of the Rb-Sr, Sm-Nd and Pb-Pb methods, contribute to characterize the complex evolution of both the geological setting and the cupriferous mineralization of the Salobo deposit. The 3.11-2.92 Ga interval (T{sub DM}, Sm-Nd, whole rock) represents the age of the igneous protholith of the gneiss. The {epsilon}{sub Nd} values calculated for the time of the gneiss formation (2859 Ma) vary between +1.02 and -1.08, and indicate a short period between the mantle-crust differentiation epoch and the gneiss formation. Moreover, the {epsilon}{sub Nd} parameter suggest a mantle source with late crustal contamination. The application of the leaching technique allows a gradual extraction of Pb at each leaching step and it was applied to chalcocite and magnetite. The 2762 {+-} 180 Ma and 2776 {+-} 240 Ma ages determined on those minerals are interpreted to be close to the epoch of the formation of the copper mineralization with Uu and Th enrichment and of the iron formation deposition, respectively, in a conventional setting. The leaching technique was also applied to tourmaline from gneiss and quartzite, and the age near to 2400 Ma was attributed to its formation. The random variability of the Pb isotope compositions of the tourmaline together with its petrographic characteristics suggest the boron source is not associated with the metassedimentary rocks of the Igarape Salobo Group. The Sm-Nd mineral isochron attributed to schists yielded an age of 2426 {+-} 13 Ma, ({sup 143} Nd/{sup 144} Nd){sub 0} equal to 0.50936 and MSWD of 1.125, for the formation of the minerals biotite-grunerite-garnet. Transamazonic ages obtained in magnetite from brecciated iron formation (2172{+-} 230 Ma, Pb-Pb) and chloritized gneisses (2135 3{+-}Ma, Rb-Sr, whole rock), are interpreted as related to greenschist facies metamorphic processes. As copper sulfides, gold, molybdenite fill fractured rocks affected by shearing and low grade metamorphism, it is possible that minerals were remobilized, at least in part, during the Transamazonian. The {sup 87} Sr/{sup 86} Sr initial ratio of 0.728 for the Rb-Sr reference isochron shows that such a event affected rocks with sifnificant crustal residence. The high and random {sup 87} Sr/{sup 86} Sr ratios found for tourmaline and carbonate reflect the influence of rocks with significant crustal residence. In conclusion, the analyses of the isotopic data are in accordance with a syngenetic origin for the Salobo copper primary mineralization, and had a polycyclic evolution associated with the Carajas-Cinzento strike-slip system at the northern portion of the Carajas Mineral Province. (author)

Study of nuclear reactions involving heavy nuclei and intermediate- and high-energy protons and an application in nuclear reactor physics (ADS); Estudo das reacoes nucleares envolvendo nucleos pesados e protons a energias intermediarias e altas de uma aplicacao em fisica de reatores nucleares (ADS)

Energy Technology Data Exchange (ETDEWEB)

Matuoka, Paula Fernanda Toledo

2016-07-01

In the present work, intermediate- and high-energy nuclear reactions involving heavy nuclei and protons were studied with the Monte Carlo CRISP (Rio - Ilheus - Sao Paulo Collaboration) model. The most relevant nuclear processes studied were intranuclear cascade and fission-evaporation competition. Preliminary studies showed fair agreement between CRISP model calculation and experimental data of multiplicity of evaporated neutrons (E < 20 MeV) from the p(1200 MeV) + {sup 208}Pb reaction and of spallation residues from the p(1000 MeV) + {sup 208}Pb reaction. The investigation of neutron multiplicity from proton-induced fission of {sup 232}Th up to 85 MeV showed that it was being overestimated by CRISP model; on the other hand, fission cross section were being underestimated. This behavior is due to limitations of the intranuclear cascade model for low-energies (around 50 MeV). The p(1200 MeV) + {sup 208}Pb reaction was selected for the study of a spallation neutron source. High-energy neutrons (E > 20 MeV) were emitted mostly in the intranuclear cascade stage, while evaporation presented larger neutron multiplicity. Fission cross section of 209 mb and spallation cross section of 1788 mb were calculated both in agreement with experimental data. The fission process resulted in a symmetric mass distribution. Another Monte Carlo code, MCNP, was used for radiation transport in order to understand the role of a spallation neutron source in a ADS (Accelerator Driven System) nuclear reactor. Initially, a PWR reactor was simulated to study the isotopic compositions in spent nuclear fuel. As a rst attempt, a spallation neutron source was adapted to an industrial size nuclear reactor. The results showed no evidence of incineration of transuranic elements and modifications were suggested. (author)

Load curve modelling of the residential segment electric power consumption applying a demand side energy management program; Modelagem da curva de carga das faixas de consumo de energia eletrica residencial a partir da aplicacao de um programa de gerenciamento de energia pelo lado da demanda

Energy Technology Data Exchange (ETDEWEB)

Rahde, Sergio Barbosa [Pontificia Univ. Catolica do Rio Grande do Sul, Porto Alegre (Brazil). Dept. de Engenharia Mecanica e Mecatronica]. E-mail: sergio@em.pucrs.br; Kaehler, Jose Wagner [Pontificia Univ. Catolica do Rio Grande do Sul, Porto Alegre (Brazil). Faculdade de Engenharia]. E-mail: kaehlerjw@pucrs.br

2000-07-01

The dissertation aims to offer a current vision on the use of electrical energy inside CEEE's newly defined area of operation. It also intends to propose different alternatives to set up a Demand Side Management (DSM) project to be carried out on the same market segment, through a Residential Load Management program. Starting from studies developed by DNAEE (the Brazilian federal government's agency for electrical energy), to establish the load curve characteristics, as well as from a research on electrical equipment ownership and electricity consumption habits, along with the contribution supplied by other utilities, especially in the US, an evaluation is offered, concerning several approaches to residential energy management, setting up conditions that simulate the residential segment's scenarios and their influence on the general system's load. (author)

Preparation and characterization of PVA/SSA membranes with Al{sub 2}O{sub 3} nanoparticles for fuel cell applications; Preparacao de caracterizacao de membranas de PVAL/SSA na presenca de nanoparticulas de Al{sub 2}O{sub 3} para aplicacao em celulas de combustivel

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Paula N.; Pires, Alfredo T.N. [Grupo de Estudo em Materiais Polimericos - POLIMAT - UFSC, Florianopolis, SC (Brazil); Catarino, Margarida; Brandao, Lucia; Tanaka, Alfredo; Mendes, Adelio [Faculdade de Engenharia da Universidade do Porto, Porto (Portugal)

2011-07-01

In the present study, PVA/SSA membranes were prepared with and without the addition of Al{sub 2}O{sub 3} nanoparticles. Sulfosuccinic acid (SSA) was used as the crosslinking agent. Membranes were prepared with different amounts of SSA (26, 43 and 55 wt.%) and with 5 and 10 wt.% of nanoparticles. Crosslinking was performed at 90 degree C during 1.5 h. Membranes were analyzed by infrared spectroscopy, thermal analysis, water absorption, ion exchange capacity (IEC) and proton conductivity. The results showed that control of the crosslinking conditions, IEC value, water absorption and polymer structure are of significant importance to obtain a set of properties suitable for application in proton exchange membrane fuel cells. (author)

Discontinuous finite element formulation for bodies of revolution with application in the prevention of fragile fracture in pressure vessel of PWR reactors; Formulacao de elementos finitos descontinuos para corpos de revolucao com aplicacao na prevencao de fratura fragil em vaso de pressao de reatores PWR

Energy Technology Data Exchange (ETDEWEB)

Benitez Alvarez, Gustavo

1999-08-15

In this work, a hybrid formulation is established for bodies of revolution, based on the equation of Fourier series for the discontinuous finite element method, analogous to the one that exists in the classical finite element method. Furthermore, a methodology to analyse the prevention of fragile fracture in pressure vessel of pressurized water reactors is presented. The results obtained suggest that careful analysis must be made for non symmetric refrigeration. (author)

Characterization of residues of effluent treatment plant from lapping process of soda-lime glass and its application in the production of concrete; Caracterizacao de residuo de estacao de tratamento de efluentes de processo de lapidacao de vidro sodo-calcico e sua aplicacao na producao de concreto

Energy Technology Data Exchange (ETDEWEB)

Antonio, Aline Pignaton; Calmon, Joao Luiz; Tristao, Fernando Avancini, E-mail: apignaton@hotmail.com, E-mail: calmonbarcelona@gmail.com, E-mail: fernandoavancini@ct.ufes.br [Universidade Federal do Espirito Santo (UFES), Vitoria, ES (Brazil). Programa de Pos-Graduacao em Engenharia Civil

2012-07-01

This study enunciates the physical, chemical and mineralogical composition of the residue from the process of ETE cutting of soda-lime glasses and its application in concrete as a replacement to the weight of CPV ARI RS cement, at levels of 0, 5, 10, 15 and 20%. Tests were performed on fresh and hardened (ages 3, 7, 28 and 300 days). The results were compared and statistically analyzed. In the fresh state, reductions in the amount of exuding water and consistency were observed. The results of compressive strength were statistically different, while the results for the tensile strength by diametrical compression and modulus of elasticity results were belonging to homogeneous groups. Beneficial effects the levels of residue on the cementitious matrix and the transition zone of concrete were identified by SEM, particularly concrete in S15.

Determination of strontium isotopic composition in natural waters: examples of application in subsurface waters of the coastal zone of Bragantina region, Para, BR; Determinacao da composicao isotopica de estroncio em aguas naturais: exemplos de sua aplicacao em aguas subsuperficiais da zona costeira na regiao Bragantina-PA

Energy Technology Data Exchange (ETDEWEB)

Bordalo, Adriana Oliveira; Moura, Candido Augusto Veloso; Scheller, Thomas [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Centro de Geociencias]. E-mail: adriana@ufpa.br

2007-07-15

Analytical procedures used for determining the concentrations and isotope composition of strontium in subsurface waters, by mass spectrometry, are described. Sampling was performed in coastal plateaus, salt marsh and mangrove environments in the coastal region of Para. Coastal plateau waters have {delta}{sup 87}Sr between 1.51 and 6.26 per mille and Sr concentration bellow 58 ppb. Salt marsh waters show {delta}{sup 87}Sr between 0.55 and 0.90 per mille and Sr concentration between 93 and 114 ppm, while mangrove waters have {delta}{sup 87}Sr per mille around zero and Sr concentration above 15 ppm. Differences in the {sup 87}Sr/{sup 86}Sr ratio in these subsurface waters are detected, as well as seasonal variations in the coastal plateau waters. (author)

Evaluation of the magnetic properties of hybrids MnFe{sub 2}O{sub 4}/SiO{sub 2} /chitosan aiming its application as biosensors; Avaliacao das propriedades magneticas de hibridos MnFe{sub 2}O{sub 4}/SiO{sub 2}/quitosana visando sua aplicacao como biosensores

Energy Technology Data Exchange (ETDEWEB)

Leal, E.; Santos, P.T. A.; Costa, F.M., E-mail: elvialeal@gmail.com [Universidade Federal de Campina Grande (LabSMaC/UFCG), PB (Brazil). Laboratorio de Sintese de Materiais Ceramicos; Barbosa, D.C. [Universidade Federal de Alagoas (UFAL), Maceio, AL (Brazil). Instituto de Quimica e Biotecnologia; Cornejo, D.R. [Universidade de Sao Paulo (USP), SP (Brazil). Instituto de Fisica; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Departamento de Engenharia de Materiais

2014-07-01

Magnetic nanoparticles have potential application in biomedicine since their features allow a wide variety of applications, such as biosensors, drug carriers, destruction of tumor cells and magnetic separation of cells and proteins. Overlooking that, the proposal is to obtain the hybrid MnFe{sub 2}O{sub 4}/SiO{sub 2}/ chitosan, to evaluate it as its magnetic property, aiming to obtain a biocompatible hybrid for biological applications, such as, e.g., biosensors. The samples were analyzed by XRD, FTIR, SEM and magnetic measurements. The results revealed that the samples of pure MnFe{sub 2}O{sub 4}, silanized and with chitosan presented the formation of the spinel with crystallite sizes of 77, 80 and 79 nm, respectively. The FTIR spectra confirmed the presence of characteristic absorption bands of the spinel and groups present in silanol and chitosan, confirming the formation of the hybrid. The silane introduction kept the ferrimagnetic characteristic of the material and led to a slight increase in the saturation magnetization, going from 55 to 61 emu/g. (author)

Analysis of technologies for natural gas transportation in Brazil: results comparison of the application of payback and NPV (Net Present Value) methods; Analise de tecnologias de transporte de gas natural no Brasil: comparacao dos resultados da aplicacao dos metodos 'payback' e VPL (Valor Presente Liquido)

Energy Technology Data Exchange (ETDEWEB)

Baioco, Juliana Souza; Santarem, Clarissa Andrade [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. de Engenharia de Petroleo; Bone, Rosemarie Broeker; Ferreira Filho, Virgilio Jose Martins [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. de Engenharia Industrial

2008-07-01

The increased demand for natural gas leads to global integration of markets, leading to decisions that cover the various technologies of transportation, noting the specific locations. The transport of natural gas considered more traditional (Liquefied Natural Gas and Pipeline) often unviable economically areas of operation due to cost. In this case, there are alternative technologies to reduce those costs. The article is to compare the technologies of transport, using the methodology of the Net Present Value (VPL) to identify one that has more positive VPL, which is the most profitable. Thus, in search of validate the results of SUBERO et al. (2004) for gas transport by Pipelines, Liquefied Natural Gas and Compressed Natural Gas. In addition, they are compared these results with the method of VPL and with the economic analysis presented in using the payback period of CHANG (2001) and SANTAREM et al. (2007). It was found that the results obtained in Brazil were identical to those obtained by CHANG (2001) and SUBERO et al. (2007), saving only some differences in magnitude due to the specific characteristics of the Brazilian economy. In other words, for the Brazilian case, the technology of Compressed Natural Gas (CNG) was the most economically viable with the method of VPL, followed by technology, Pipeline and Liquefied Natural Gas (LNG), regardless of the interest rates of 10% and 6.5% and periods of 20 and 30 years. The contribution of this work is to show that despite of the method, payback or VPL, the various alternatives for transporting natural gas to Brazil have the same ranking and economic viability. (author)

Study of the oxygen reduction reaction using Pt-Rare earths (La, Ce, Er) electrocatalysts for application of PEM fuel cells; Estudo da reacao de reducao do oxigenio utilizando eletrocatalisadores a base de Pt-terras raras (La, Ce, Er) para aplicacao em celulas a combustivel tipo PEM

Energy Technology Data Exchange (ETDEWEB)

Gomes, Thiago Bueno

2013-07-01

The complexity of the oxygen reduction reaction (ORR) and its potential losses make it responsible for the most part of efficiency losses at the Fuel Cells. For this reaction the electrocatalyst witch is most appropriated and shows better performance is platinum, a noble metal that elevates the cost, raising barriers for Fuel Cells technology to enter the market. First this work focuses on reducing the amount of platinum used in the cathode, by being replaced by rare earths. The most common methods of synthesis involves a large amount of steps and this work proposed to prepare the electrocatalyst through a simpler way that would not take so many steps and time to be done. Using an ultrasound mixer the electrocatalyst was prepared mixing platinum supported on carbon black and the rare earths lanthanum, cerium and erbium oxides to be applied in a half-cell study of the ORR. The Koutecky-Levich plots shows that among the electrocatalysts prepared the Pt80Ce20/C had the catalytic activity close to the commercial BASF platinum on carbon black, suggesting that the reaction was taken by the 4-electron path. As found in some works in literature, among the rare earth used to study the ORR, cerium is the one witch shows the better performance because it is able to store and provide oxygen. This feature is of great interest for the ORR because this reaction is first order to the oxygen concentration. Results show that is possible to reduce the amount of platinum maintaining the same electrocatalyst activity. (author)

Fabrication and study of stability of Ca{sub 2}AlWO{sub 5,5} ceramic in crude petroleum for applications in petroleum industry; Fabricacao e estudo da estabilidade em petroleo cru da ceramica Ca{sub 2}AlWO{sub 5,5} para aplicacao em industria petrolifera

Energy Technology Data Exchange (ETDEWEB)

Yadava, Y.P.; Silva, N.D.G.; Sousa, A.G. de; Sanguinetti Ferreira, R.A., E-mail: dea.a@hotmail.co [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Engenharia Mecanica

2010-07-01

Perovskite-type ceramic oxides or their derivatives are used for applications in high technology because of their enormous range of physic-chemical properties with little change in structural characteristics. In this paper we report manufacture ceramic components of a new ceramic Ca{sub 2}AlWO{sub 5,5} by thermo-mechanical process. Stoichiometric amounts of chemical constituents with high degree of purity, were homogenized using a ball mill and high purity alumina balls, compacted by uniaxial pressing and annealed at 1200 deg C for 48 hours. The structural characterization studied by x-ray diffraction that this material has a typical complex ordered cubic perovskite structure. For the study the stability of these ceramics in crude petroleum circular discs of 20 mm diameter and 2 mm thickness were produced and sintering. These discs were submerged in crude petroleum for 15, 30 and 45 days and were examined at each stage by X-ray diffraction, optical microscopy and hardness testing and these results show that Ca{sub 2}AlWO{sub 5,5} are stable in crude petroleum environment. (author)

Evaluation and application of PEMFC fuel cell's technologies developed at IPEN applied to a 500 W{sub e} fuel cell stack; Avaliacao e aplicacao de tecnologias de celulas a combustivel tipo PEMFC desenvolvida no IPEN em um modulo de 500 W{sub e} de potencia nominal

Energy Technology Data Exchange (ETDEWEB)

Cunha, Edgar Ferrari da

2009-07-01

This work is part of a research project on PEMFC technologies carried out in IPEN to develop and optimize a 500 W{sub e} fuel cell stack. The MEAs scaling up from 25 cm{sup 2} to 144 cm{sup 2} produced by the method of sieve printing; computational fluid dynamics by computer simulation of gas flow channels in bipolar plates using COMSOL{sup R} program and the use of Pt/C electrodes developed by alcohol reduction method in single cells were used to build a stack of 500 W{sub e} nominal power for possible commercial applications, produced with national technology and industrial support. A 100 hours fuel cell's test was carried out in a 144 cm{sup 2} single cell to study the stability of the MEA fabricated by sieve printing method. This single cell showed good stability within this period of time. The developed stack has reached the maximum power of 574 W{sub e} at 100 A (694.4 mA cm{sup -2}). The operating power of 500 W{sub e} was obtained at 77.7 A (540.1 mA cm{sup -2}) and potential of 6.43 V, with efficiency of 43.3%. In terms of cogeneration, the thermal power or generated heat by the stack was 652 W{sub t}. The initial estimated cost for the 500 W{sub e} stack was about R$ 4,500.00, considering only the used materials for its construction. (author)

Novel materials based on chitosan, its derivatives and cellulose fibres

Science.gov (United States)

Fernandes, Susana Cristina de Matos

O presente trabalho tem como principal objectivo o desenvolvimento de novos materiais baseados em quitosano, seus derivados e celulose, na forma de nanofibras ou de papel. Em primeiro lugar procedeu-se a purificacao das amostras comerciais de quitosano e a sua caracterizacao exaustiva em termos morfologicos e fisicoquimicos. Devido a valores contraditorios encontrados na literatura relativamente a energia de superficie do quitosano, e tendo em conta a sua utilizacao como precursor de modificacoes quimicas e a sua aplicacao em misturas com outros materiais, realizou-se tambem um estudo sistematico da determinacao da energia de superficie do quitosano, da quitina e seus respectivos homologos monomericos, por medicao de ângulos de contacto Em todas as amostras comerciais destes polimeros identificaram-se impurezas nao polares que estao associadas a erros na determinacao da componente polar da energia de superficie. Apos a remocao destas impurezas, o valor da energia total de superficie (gs), e em particular da sua componente polar, aumentou consideravelmente. Depois de purificadas e caracterizadas, algumas das amostras de quitosano foram entao usadas na preparacao de filmes nanocompositos, nomeadamente dois quitosanos com diferentes graus de polimerizacao, correspondentes derivados soluveis em agua (cloreto de N-(3-(N,N,N-trimetilamonio)-2- hidroxipropilo) de quitosano) e nanofibras de celulose como reforco (celulose nanofibrilada (NFC) e celulose bacteriana (BC). Estes filmes transparentes foram preparados atraves de um processo simples e com conotacao 'verde' pela dispersao homogenea de diferentes teores de NFC (ate 60%) e BC (ate 40%) nas solucoes de quitosano (1.5% w/v) seguida da evaporacao do solvente. Os filmes obtidos foram depois caracterizados por diversas tecnicas, tais como SEM, AFM, difraccao de raio-X, TGA, DMA, ensaios de traccao e espectroscopia no visivel. Estes filmes sao altamente transparentes e apresentam melhores propriedades mecânicas e maior

Whole-body magnetic resonance imaging for staging and follow-up of pediatric patients with Hodgkin's lymphoma: comparison of different sequences; Aplicacao da ressonancia magnetica de corpo inteiro para o estadiamento e acompanhamento de pacientes com linfoma de Hodgkin na faixa etaria infanto-juvenil: comparacao entre diferentes sequencias

Energy Technology Data Exchange (ETDEWEB)

Nava, Daniel; Oliveira, Heverton Cesar de, E-mail: daniel@centrus.com.b [Universidade Federal de Sao Paulo (UNIFESP/EPM), SP (Brazil). Dept. de Diagnostico por Imagem; Luisi, Flavio Augusto; Lederman, Henrique Manoel [Universidade Federal de Sao Paulo (UNIFESP/IOP/GRAACC), SP (Brazil). Inst. de Oncologia Pediatrica. Grupo de Apoio ao Adolescente e a Crianca com Cancer; Ximenes, Andrea Regina da Silveira [Clinica Centrus, Campinas, SP (Brazil)

2011-07-01

Objective: to compare the performance of the T1, T2, STIR and DWIBS (diffusion-weighted whole-body imaging with background body signal suppression) sequences in the staging and follow-up of pediatric patients with Hodgkin's lymphoma in lymph node chains, parenchymal organs and bone marrow, and to evaluate interobserver agreement. Materials and methods: the authors studied 12 patients with confirmed diagnosis of Hodgkin's lymphoma. The patients were referred for whole body magnetic resonance imaging with T1-weighted, T2-weighted, STIR and DWIBS sequences. Results: the number of lymph node sites characterized as affected by the disease on T1- and T2-weighted sequences showed similar results (8 sites for both sequences), but lower than DWIBS and STIR sequences (11 and 12 sites, respectively). The bone marrow involvement by lymphoma showed the same values for the T1-, T2-weighted and DWIBS sequences (17 lesions), higher than the value found on STIR (13 lesions). A high rate of interobserver agreement was observed as the four sequences were analyzed. Conclusion: STIR and DWIBS sequences detected the highest number of lymph node sites characterized as affected by the disease. Similar results were demonstrated by all the sequences in the evaluation of parenchymal organs and bone marrow. A high interobserver agreement was observed as the four sequences were analyzed. (author)

Technical and economical analysis for the implementation of small scale GTL (Gas-to-liquids) technology to monetizing the associated remote offshore stranded natural gas in Brazil; Analise tecnica e economica da aplicacao da tecnologia GTL de pequena escala para a monetizacao do gas natural associado remoto offshore no Brasil

Energy Technology Data Exchange (ETDEWEB)

Castelo Branco, David Alves

2008-02-15

The volume of stranded natural gas global reserves is substantial and represents more than a third of the world's proven natural gas reserves. In Brazil, recent discoveries operated by PETROBRAS, with participation of other companies, show trend of stranded gas reserves incorporation, associated gas or not. This dissertation's main objective is to make a technical and economic analysis of the implementation of small-scale GTL technology for the exploitation of stranded associated natural gas offshore in Brazil. Thus, the dissertation held, initially, a survey of the processes of gasification and the manufacturers with technologies and projects based on these processes, for specific offshore applications. In a second stage, the conditions of the offshore environment were examined. After the confrontation of the technologies available and the operation conditions, a technological alternative has been chosen to be used in an illustrative economic analysis. The results show that GTL offshore option becomes viable at a minimum price of about US $ 40.00 / barrel. Although this value is greater than the robustness price adopted by PETROBRAS, there are prospects for the reduction of GTL technology costs. (author)

Disruptive tension under normalized atmospheric pulse and residual tension on lightning arresters power systems: statistical methods application. Practical results and comments; Ensaios de tensao disruptiva sob impulso atmosferico normalizado e tensao residual em para-raios para sistemas de potencia: a aplicacao de metodos estatisticos. Comentarios e resultados praticos

Energy Technology Data Exchange (ETDEWEB)

Martinez, M.L.B. [ELETRONORTE, Brasilia (Brazil); Oliveira, A.L. [Eletricidade da Sao Paulo S.A. (ELETROPAULO), Sao Paulo, SP (Brazil)

1991-12-31

The necessity of complementary assays of disruptive tension under normalized atmospheric pulses and residual tension on lightning arresters, as well as the adequate use of a statistical treatment of its results are commented. Some statistical methods and its applicability on lightning arresters characteristics surveys, and its quality control are proposed 8 refs., 5 figs., 3 tabs.

k{sub 0}-INAA application at IPEN Neutron Activation Laboratory by using the k{sub 0}-IAEA program: biological sample analysis; Aplicacao do metodo k{sub 0}-INAA no Laboratorio de Analise por Ativacao com Neutrons do IPEN utilizando o programa k{sub 0}-IAEA: analise de amostras biologicas

Energy Technology Data Exchange (ETDEWEB)

Puerta, Daniel Correa

2013-07-01

The results obtained in the application of the k{sub 0}-standardization method at LAN-IPEN for biological matrices analysis, by using the k{sub 0}-IAEA software, provided by the International Atomic Energy Agency (IAEA), are presented. The flux parameters f and a of the IEA-R1 reactor were determined for the pneumatic irradiation facility and for one selected irradiation position, 24B/shelf2, for short and long irradiations, respectively. In order to obtain these parameters, the bare triple-monitor method with {sup 197}Au-{sup 96}Zr-{sup 94}Zr was used. In order to evaluate the accuracy and precision of the methodology, the biological reference materials Peach Leaves (NIST SRM 1547), Mixed Polish Herbs (INCT-MPH-2) e Tomato Leaves (NIST SRM 1573a) were analyzed. The statistical criteria Relative Errors (bias, %), Coefficient of Variation (CV) and U-score were applied to the obtained results (mean of six replicates). The relative errors (bias, %) in relation to certified values, were, for most elements, in the range of 0 e 30. The Coefficients of Variation were below 20%, showing a good reproducibility of the results. The U-score test showed that all results, except Na in Peach Leaves and in Tomato Leaves, were within 95% confidence interval. These results point out to a promising use of the k{sub 0}-INAA method at LAN-IPEN for biological sample analysis. (author)

Synthesis and characterization of CeO{sub 2} - TiO{sub 2} system for use in heterogeneous photocatalysis in photodegradation of methylene blue dye; Sintese e caracterizacao do sistema CeO{sub 2} - TiO{sub 2} para aplicacao em fotocatalise heterogenea na fotodegradacao do corante azul de metileno

Energy Technology Data Exchange (ETDEWEB)

Bragatto, Julia

2016-07-01

This study has as its goal the synthesis of a mixed oxide system type CeO{sub 2} - TiO{sub 2}, through the polymeric precursor method, to be used in heterogeneous photocatalysis. The synthesized materials were characterized by Thermogravimetry (TG), Derivative Thermogravimetry (DTG), Differential Thermal Analysis (DTA) and X-Ray Diffraction (XRD). The results of the thermal analysis showed in what temperature ranges certain events occur such as the formation of cerium oxide between 600 and 800 ° C, which refers to the crystallization of the material. Regarding the formation of titanium oxide, events between 600 and 800 ° C are perceived, which suggests the transformation of anatase to rutile phase. The XRD analysis showed no occurrence of the same phase for all materials, meaning that there is a variation in the formation of phases according to concentration of precursor for each sample. Noteworthy are the formation of CeO{sub 2} for Ce75-Ti25 and Ce50-Ti50 concentrations, with cubic crystal structure of the fluorite type. In Ce75-Ti25 and Ce25-Ti75 it is present the TiO{sub 2} in the anatase and rutile phase, with crystal structure of the tetragonal and tetrahedron type, respectively, as well as the formation of CeTi{sub 2}O{sub 6} in Ce50-Ti50 and Ce25-Ti75, with structure monoclinic. From these analyses, it is possible to see which samples, and in which temperatures of calcination the material has increased crystallinity, making the choice for their application in heterogeneous photocatalysis, aiming the degradation of methylene blue dye. Among the tested materials for methylene blue, the sample that stood out was the Ce50-Ti50, with calcination temperature of 800 °C, with values close to 50% degradation, because it was the sample that showed higher dye adsorption capacity, which is the step that precedes photodegradation. (author)

Mass and energy balance: application to the sanitary sewage treatment with an upflow anaerobic sludge blanket (UASB) reactors to temperature of 20 deg C; Balanco de massa e energia: aplicacao ao tratamento de esgotos sanitarios com reatores anaerobicos de manta de lodo (UASB) a temperatura de 20 deg C

Energy Technology Data Exchange (ETDEWEB)

Carrasco, Katherine Ivonne Alcocer

1992-07-01

A feasibility study of an Upflow Anaerobic Sludge Blanket (UASB) reactor use as a sewage treatment plant component for areas with average temperature bellow 20 deg C was performed. The literature on UASB reactor indicates that a 70 % chemical oxygen demand (COD) removal al 20 and 6 to 17 hr hydraulic detention time is possible in sewage treatment plants. This study was developed for a Oruro (Bolivia) district and the plant was designed for a population of up to 10,000 inhabitants. This city presents average temperatures lower than 20 deg C being necessary to heat the sewage if is used the UASB reactor. Based on the performance simulation of mass and energy balances it was found that 84 % COD removal and 92 % total suspended solids removal are possible. The potential average energy production (61 kW due to methane combustion) is less than 10 % of the power consumption for heating, which indicates that the use of the methane may be expensive. The evaluated energy rate to be applied to the sewage for heating is 0.33 kW/m{sup 3} d{sup -1} which is significantly greater than the necessary energy to introduce oxygen in aerobic treatment systems. However total energy demand for aerobic systems must be evaluated for each particular case. (author)

Application of low-dose gamma irradiation to extend the shelf life of minimally processed Red Beet (Beta vulgaris sp. vulgaris L.), cv. Early Wonder; Aplicacao de baixas doses de radiacao gama para extensao da vida util de beterraba vermelha (Beta vulgaris ssp. vulgaris L.), cv. Early Wonder, minimamente processada

Energy Technology Data Exchange (ETDEWEB)

Hernandez, Nilber Kenup

2006-07-01

This study was aimed at investigating the effects of low-dose gamma irradiation on shelf-life extension and phyto sanitary safety of minimally processed red beet with basis on physicochemical; microbiological; chemical and sensory analyses. The samples (Beta vulgaris ssp. vulgaris L.), Early Wonder cultivar, were cultivated in the experimental area of the Horticulture Sector of the Departamento de Fitotecnia of the Instituto de Agronomia, Universidade Federal Rural do Rio de Janeiro, Seropedica, RJ, as part of two experiments performed during the second semester of 2005. In each experiment, 1200 plants (40 per linear meter of terrain) were sowed. Physicochemical analyses (fresh mass; length; average diameter and total soluble solids) of the edible part of the red beets (their tuberous roots) were periodically carried out in order to assess the most appropriate time for harvest by monitoring the development of the plants. Those times were found to be 104 and 73 days after transplanting, respectively. The harvested edible part of the roots were minimally processed and separated in two groups: (1) gamma irradiated (with doses of 0.5; 1.0 and 1.5 kGy) and (2) non-irradiated (control). All samples were stored at 8 degree C. Microbiological analyses were performed during the storage period (22 and 21 days, for experiments 1 and 2, respectively) in order to evaluate the phyto sanitary quality of the samples (Salmonella sp.; coliforms and total count of mesophilic aerobic and lactic acid bacteria). The samples irradiated with 1.0 and 1.5 kGy were found to remain appropriate for consumption for 21 days, as compared to only 7 days for the control. Monitoring of chemical composition was also performed and included the determination of saccharose; glucose; fructose and vitamins B1 and B2. No difference was found between the concentrations of those vitamins in irradiated and control samples at the end of the storage period, whereas significant changes in sugar contents were detected independently of the dose. In addition, physicochemical analyses investigated the evolution of pH; total acidity; total soluble solids and ascorbic acid throughout storage. Samples from experiment 2 were also subjected to sensory analyses for overall appearance and aroma at 4 different post-irradiation times. The results indicated that the samples irradiated with 1.0 and 1.5 kGy remained good for consumption for 20 days. Therefore it can be concluded that the application of those doses extended the shelf life of the samples without harming their nutritional and sensory quality. Finally, the results indicate that the dose of 1.0 kGy is the most appropriate for the conservation of red beet among those tested. (author)

Wetting evaluation of silver based braze alloys onto zirconia metalized with reactive elements for application in oil well drill bots; Avaliacao do molhamento de ligas de adicao a base de prata sobre zirconia polida e metalizada com elementos ativos para aplicacao em brocas de perfuracao de pocos de petroleo

Energy Technology Data Exchange (ETDEWEB)

Pereira, J.C.; Silva, J.M.; Santos, P.R.F.; Nascimento, R.M.; Martinelli, A.E. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Engenharia de Materiais], Email: jocabuzo@gmail.com; Pimenta, J.S. [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Dept. de Engenharia Mecanica

2010-07-01

Drill bits with hard ceramic inserts are often used on drilling operations. The cutting and crushing action of rocks will produce failures in the tricone bits, which are related to wear; total or partial rupture of the drill bit body or even the inserts; thermal shock and corrosion. The research of better drill bits with ceramic inserts thermally more stable and mechanically stronger, will lead to an increase of their lifetime, and so reducing costs of substitution and maintenance. In the present work, some silver based braze alloys were melted onto zirconia YSZ substrates metallized or not with active metals. inside a furnace with vacuum of 10{sup -5} mbar to evaluate the wetting behavior. The system with AgCuTi and the non metallized YSZ ceramic, showed low contact angles and stable interfaces, which may be appropriate for brazing metal/ceramic parts. (author)

Application of the linear load normalization technique in specimens SE(T) for the evaluation of structural integrity in conducting ducts of gas and oil; Aplicacao da tecnica de normalizacao linear da carga em especimes SE(T) para a avaliacao de integridade estrutural em dutos condutores de gas e petroleo

Energy Technology Data Exchange (ETDEWEB)

Piovatto, R.R.; Carvalho, A.L.M.; Bose Filho, W.W.; Spinelli, D.; Rugieri, C. [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil); Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica], e-mail: betaopiovatto@gmail.com

2006-07-01

This aim of this work is to evaluate the fracture toughness of pipe lines under high internal pressure, used in the petroliferous industry for transportation of gas and oil. These ducts are produced from high strength low alloy steels, classified as API X60. Therefore, to simulate the stress and strain fields ahead of crack, the SE(T) specimens has been point out as the best specimen geometry. The linear load normalization technique, LLN, has been showed as a promissory technique for obtaining the J-R resistance curves. The J values were obtained following the ASTM 1820 and 1152 standards, with the coefficients modified for this specimen geometry. Side groves were executed to avoid crack tunneling and to maintaining the crack on the plane perpendicular to the loading direction. The J-R curves obtained are compatible for high ductility steels. However, the observed J values seems to high, and the factors affecting this result are discussed in this work. (author)

Evaluation and application of PEMFC fuel cell's technologies developed at IPEN applied to a 500 W{sub e} fuel cell stack; Avaliacao e aplicacao de tecnologias de celulas a combustivel tipo PEMFC desenvolvida no IPEN em um modulo de 500 W{sub e} de potencia nominal

Energy Technology Data Exchange (ETDEWEB)

Cunha, Edgar Ferrari da

2009-07-01

This work is part of a research project on PEMFC technologies carried out in IPEN to develop and optimize a 500 W{sub e} fuel cell stack. The MEAs scaling up from 25 cm{sup 2} to 144 cm{sup 2} produced by the method of sieve printing; computational fluid dynamics by computer simulation of gas flow channels in bipolar plates using COMSOL{sup R} program and the use of Pt/C electrodes developed by alcohol reduction method in single cells were used to build a stack of 500 W{sub e} nominal power for possible commercial applications, produced with national technology and industrial support. A 100 hours fuel cell's test was carried out in a 144 cm{sup 2} single cell to study the stability of the MEA fabricated by sieve printing method. This single cell showed good stability within this period of time. The developed stack has reached the maximum power of 574 W{sub e} at 100 A (694.4 mA cm{sup -2}). The operating power of 500 W{sub e} was obtained at 77.7 A (540.1 mA cm{sup -2}) and potential of 6.43 V, with efficiency of 43.3%. In terms of cogeneration, the thermal power or generated heat by the stack was 652 W{sub t}. The initial estimated cost for the 500 W{sub e} stack was about R$ 4,500.00, considering only the used materials for its construction. (author)

Application of Monte Carlo method in study of the padronization for radionuclides with complex disintegration scheme in 4{pi}{beta}-{gamma} coincidence System; Aplicacao do metodo de Monte Carlo no estudo da padronizacao de radionuclideos com esquema de desintegracao complexos em sistema de coincidencias 4{pi}{beta}-{gamma}

Energy Technology Data Exchange (ETDEWEB)

Takeda, Mauro Noriaki

2006-07-01

The present work described a new methodology for modelling the behaviour of the activity in a 4{pi}{beta}-{gamma} coincidence system. The detection efficiency for electrons in the proportional counter and gamma radiation in the NaI(Tl) detector was calculated using the Monte Carlo program MCNP4C. Another Monte Carlo code was developed which follows the path in the disintegration scheme from the initial state of the precursor radionuclide, until the ground state of the daughter nucleus. Every step of the disintegration scheme is sorted by random numbers taking into account the probabilities of all {beta}{sup -} branches, electronic capture branches, transitions probabilities and internal conversion coefficients. Once the final state was reached beta, electronic capture events and gamma transitions are accounted for the three spectra: beta, gamma and coincidence variation in the beta efficiency was performed simulating energy cut off or use of absorbers (Collodion). The selected radionuclides for simulation were: {sup 134}Cs, {sup 72}Ga which disintegrate by {beta}{sup -} transition, {sup 133}Ba which disintegrates by electronic capture and {sup 35}S which is a beta pure emitter. For the latter, the Efficiency Tracing technique was simulated. The extrapolation curves obtained by Monte Carlo were filled by the Least Square Method with the experimental points and the results were compared to the Linear Extrapolation method. (author)

Analysis of the feasibility of applying the theory of the supply chain nanagement for the electric energy chain services of the Bahia state, Brazil; Analise da viabilidade de aplicacao da teoria da gestao da cadeia de suprimentos para a cadeia de servicos de energia eletrica do estado da Bahia

Energy Technology Data Exchange (ETDEWEB)

Leal, Lydiane Abdon [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil)], e-mail: lydianeleal@yahoo.com.br; Carvalho, Claudio Bezerra de [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil). Petroleo e Gas], e-mail: claudiobcarvalho@yahoo.com.br

2008-07-01

This article aims to analyze the potential application of integrated management, through concepts of SCM (Supply Chain Management), in the chain of the energy industry, which is characterized by a chain of services. The prospect of incorporating new integrated management practices, through the selection of concepts and tools for supply chain management took the possibility of promoting systemic approach that includes the major components (physical, regulatory and commercial) the market of electric energy, investigating possibilities of reorganization of this important segment of the industry production chain. The proposal aims to provide a tool for planning indicative of great potential, to identify a theoretical reference in this important productive sector. The work includes qualitative analyses, which aim to map, understand and systematize the changes undertaken, with emphasis on Brazilian electric sector. It is described, in general, the characterization of the energy industry in Bahia state as a possible case study in implementing the proposed methodology. Thus, the work seeks to help the staff decision to purchase a minimum of integrated vision of possible decisions, including the dynamic interactions between market supply and demand. (author)

Analysis of X-ray diffraction of the titanium dioxide (TiO{sub 2}) synthesized by the Pechini Method for application in heterogeneous photocatalysis processes; Analise de difracao de raios X do dioxido de titanio (TiO{sub 2}) sintetizado pelo metodo Pechini para aplicacao em processos de fotocatalise heterogenea

Energy Technology Data Exchange (ETDEWEB)

Oliveira, P.L.; Araujo, D.S.; Costa, A.C.F.M.; Oliveira, L.S.C., E-mail: palomalima_eq@yahoo.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

2016-07-01

Titanium dioxide (TiO{sub 2}) is a polymorph commonly applied to heterogeneous photocatalysis processes for being relatively inexpensive and photo - stable. It is usually found in three different crystalline phases (anatase, rutile and brookite), which directly interfere in their photocatalytic efficiency. Therefore, this study aimed to investigate the obtainment of TiO{sub 2} by Pechini method in different conditions for application in the heterogeneous photocatalysis process. For this purpose, it was evaluated by analysis of X-ray diffraction (XRD ) the behavior of TiO{sub 2} materials synthesized in proportions of 2:1 and 3:1 (titanium isopropoxide/citric acid), pyrolyzed at 300°C/3h and 400°C /h and calcined at 400°C and 500°C/1h. The results revealed that the TiO{sub 2} samples produced in the ratio of 2:1 and 3:1 isopropoxide/citric acid and calcined at 500°C/h presented the best results. (author)

Study of phase transformation of U-2,5Zr-7,5Nb e U-3Zr-9Nb alloys for application in advanced nuclear fuel; Estudo das transformacoes de fases nas ligas U-2,5Zr-7,5Nb e U-3Zr-9Nb para aplicacao em combustivel nuclear avancado

Energy Technology Data Exchange (ETDEWEB)

Pais, Rafael Witter Dias

2015-07-01

Metal fuels are relevant in the nuclear area due to the versatility of its use in the nuclear fuel cycle. Among the alloys of uranium investigated with high potential for use in nuclear power reactors, U-Zr-Nb alloys appear as an important alternative because of their superior physico-chemical and metallurgical properties. These alloys have also potential for use in nuclear testing, research and production radioisotopes of high performance nuclear reactors. Therefore, the development of these alloys is strategic since they are planned to be used in national reactors as RMB (Brazilian Multipurpose Reactor) and LABGENE (Electrical Generation Core Laboratory), currently under development in Brazil. In this work it was realized a extensive study in the scope of the manufacturing, heat treatment and phase transformations of U-2,5Zr-7,5Nb (m/m%) and U-3ZR-9NB (m/m%) fuel alloys. Ingots of both alloys were produced employing a specific methodology developed in this study. This methodology comprised the melting process in a vacuum induction furnace at high temperatures (1500 °C) and thermal-mechanical processing to break the as-cast structure. Samples with typical dimensions (17 x 7 x 2.5 mm) free from macrostructural defects were homogenized at 1000 °C in vacuum of 10{sup -5} torr for 17.5 hours with a 10°C/min cooling rate until to 820 °C and, subsequently, quenched in water. The samples, randomly selected, were subjected to isothermal treatment tests under different conditions of time and temperature. Isothermal treatments for transformation and retention phases were carried out in a special assembly designed for this work. After the tests, the samples were characterized by the usual phase characterization techniques with particular emphasis for the X-ray diffraction technique. In this way, the Rietveld refinement method was applied. In the case of uranium based alloys it is quite challenging due to the lack of data in the literature. In this work a strategy for the Rietveld refinement with an extensive study of refinement parameters was established. The results allowed to establish a comparative study with the few results available in the literature and to obtain the TTT diagrams of initial transformation for both alloys. Finally, this work provides significant innovations to the field of knowledge of the alloys studied which will contribute to the development of nuclear fuel for high performance nuclear reactors. (author)

Development and standardization of radioimmunoassay technique for human proinsulin determining and its use in the study of type II diabetes mellitus associated to obesity; Desenvolvimento e padronizacao da tecnica de radioimunoensaio para a determinacao de pro-insulina humana e sua aplicacao no estudo do diabetes mellitus tipo II associado a obesidade

Energy Technology Data Exchange (ETDEWEB)

Nascimento, Martha do

1996-12-31

The availability of immunoassay methodology for proinsulin is important to define its physiological and pathophysiological significance in humans. Serum concentration of proinsulin are elevated in patients with type II Diabetes Mellitus (NIDDM) and recently diagnosed Type I, so a raised circulating concentration of proinsulin may serve as an early indicator of {beta} cells dysfunction. recently, in NIDDM the serum concentrations of proinsulin and its B-chain-C-peptide junctional split form, des (31-32), were found to correlate with diastolic blood pressure, a risk factor for cardiovascular disease. The development of a sensitive and specific radioimmunoassay (RIA) methodology for proinsulin has been difficult due to its low concentration in serum and the presence of proinsulin conversion intermediates in fluids and tissues. Also other potentially cross-reactive peptides, including insulin and C-peptide, can interfere in the assay. This work describe a highly specific human proinsulin RIA developed by using biosynthetic human proinsulin (hPI) as immunogen, standard and tracer. (author) 133 refs., 17 figs., 36 tabs.

Inflammatory process decrease by gallium-aluminium-arsenide (GaAlAs) low intensity laser irradiation on postoperative extraction of impacted lower third molar; Reducao de processo inflamatorio com aplicacao de laser de arseneto de galio aluminio ({lambda}=830 nm) em pos-operatorio de exodontia de terceiros molares inferiores inclusos ou semi-inclusos

Energy Technology Data Exchange (ETDEWEB)

Atihe, Mauricio Martins

2002-07-01

This study aimed the observation of inflammatory process decrease by the use of GaAlAs Low Intensity Laser ({lambda}=830 nm; 40 mW) irradiation. Five patients were selected and submitted to surgery of impacted lower third molars, both right and left sides at different occasions. On a first stage, a tooth of a random chosen side - right or left - was extracted by conventional surgery, without LILT. The inflammatory process was measured at postoperative on the first, third and seventh days. This side was then called 'control side'. After 21 days, period in which the inflammatory process of the first surgery was terminated, the other side surgery took place, this time using LILT (4 J at four spots) at postoperative, first and third days. As the previous surgery, the inflammatory process was also measured at postoperative on the first, third and seventh days. This side was called 'experimental or lased side'. The inflammatory process was evaluated by measuring its four characteristic signs: swelling, pain, color and temperature. It was clearly observed a decrease for swelling, pain and color on the lased side which presented significant inference and descriptive statistics. It can be concluded that GaAlAs Low Intensity Laser ({lambda}=830 nm) can surely be used as an additional and important anti-inflammatory source on impacted lower third molar surgeries. (author)

Use of microcontroller in gamma-ray spectrometer construction using NaI(Tl) sensor, with emphasis in multichannel analyzer, to applications in nuclear and environmental geophysics; Uso de microcontrolador na construcao de espectrometro gama com sensor de NaI(Tl), com enfase em analisador multicanal, para aplicacao em geofisica nuclear e ambiental

Energy Technology Data Exchange (ETDEWEB)

Silva, Nilton

2005-07-01

In this work of nuclear geophysical instrumentation the main purpose was the development of a gamma-ray spectrometer prototype with multi channel analyzer, since the spectroscopic amplifier until your firmware. The heart of the digital part was an ATMEL 8 bits microcontroller (AT89S8252). All circuits were made and assembled in the Laboratory of Applied Geophysical Instrumentation (LIGA) of IAG-USP. A microcontroller software was completely developed in C ANSI language using the Small Device C Compiler version 2.4.8, that is a free software distributed under General Public License (GPL). At first, microcontroller was used to change all digital circuit of one classic SCINTREX GAD-6 differential gamma-ray spectrometer. Measurement times with order of 2 days became possible, and it could work in non climate ambient. Then, after this stage, had been started the development of a multichannel analyzer (MCA) working in pulse height analyzer mode with 4096 channels capacity, to use in many kinds of nuclear detection. Besides it, was developed an automatic gain system for photopeak stabilization, by the use of one radioactive source ({sup 133}Ba). This automatic gain system is very important in the case of NaI(Tl) scintillometric detectors, due PMT sensitivity with temperature and aging of some laboratory electronic circuits. Two power supplies with high stability, using pulse width modulation (PWM) techniques were developed, in order to all system became free of electrical line break off. One PWM power polarizes a photo multiplier tube (PMT) with high voltage and another supplies remaining developed circuits. Calibration in energy using standards sources {sup 137}Cs and {sup 60}Co showed that gamma detector developed has a good linearity and low thermal drift, even working in absent of air-conditioned. Concentrations measurements of K, U and Th were made in samples of soils, vegetables, etc. (author)'

In vitro evaluation of the morphologic changes on the root dentine irradiated by CO{sub 2} laser associated or not to calcium hydroxide application; Avaliacao in vitro das alteracoes morfologicas da superficie da dentina radicular irradiada pelo laser de CO{sub 2} associado ou nao a aplicacao de hidroxido de calcio

Energy Technology Data Exchange (ETDEWEB)

Romano, Ana Cristina Cury Camargo

2003-07-01

This in vitro study has evaluated the structural changes on the root dentine irradiated by a CO{sub 2} laser associated or not to calcium hydroxide application, from the irradiated surface analysis by means of Scanning Electronic Microscopy (SEM). The purpose of this evaluation has been the study of an alternative method for the treatment of dentine hypersensitivity. Fourteen human teeth were utilized, third molars, divided into 7 groups. Group I (control group) to which no treatment was applied; Groups II, III and IV were given an application of Ca (OH){sub 2} paste followed by C0{sub 2} laser irradiation, lasting 5 seconds each with intervals of 10 seconds between each application, with continuous emission, power of 0.5 W (Group II), 1.0 W (Group III), and 1.5 W (Group IV); Groups V, VI, and VII were given laser irradiations without the Ca (OH){sub 2} paste following the same parameters applied to groups II, III, and IV respectively. Morphologic changes suggesting to fusion and re-solidification have been observed, as well as the presence of material obstructing the whole analyzed surface on groups II, III, and IV (laser + Ca (OH){sub 2}). As for groups V, VI, and VII, it has been observed fusion, re-solidification, and cracks, and these results being statistically significant when compared the '(Ca (OH){sub 2})' groups to the laser groups. No statistically significant differences were observed regarding the different powers applied in the groups that used the same treatment. Despite this result, it can be stated that powers above 1.0 W (DP = 125,38 W/cm{sup 2}) are unfavorable due to the undesirable morphologic alterations and aesthetic compromising. (author)

In vitro evaluation of the morphologic changes on the root dentine irradiated by CO{sub 2} laser associated or not to calcium hydroxide application; Avaliacao in vitro das alteracoes morfologicas da superficie da dentina radicular irradiada pelo laser de CO{sub 2} associado ou nao a aplicacao de hidroxido de calcio

Energy Technology Data Exchange (ETDEWEB)

Romano, Ana Cristina Cury Camargo

2003-07-01

This in vitro study has evaluated the structural changes on the root dentine irradiated by a CO{sub 2} laser associated or not to calcium hydroxide application, from the irradiated surface analysis by means of Scanning Electronic Microscopy (SEM). The purpose of this evaluation has been the study of an alternative method for the treatment of dentine hypersensitivity. Fourteen human teeth were utilized, third molars, divided into 7 groups. Group I (control group) to which no treatment was applied; Groups II, III and IV were given an application of Ca (OH){sub 2} paste followed by C0{sub 2} laser irradiation, lasting 5 seconds each with intervals of 10 seconds between each application, with continuous emission, power of 0.5 W (Group II), 1.0 W (Group III), and 1.5 W (Group IV); Groups V, VI, and VII were given laser irradiations without the Ca (OH){sub 2} paste following the same parameters applied to groups II, III, and IV respectively. Morphologic changes suggesting to fusion and re-solidification have been observed, as well as the presence of material obstructing the whole analyzed surface on groups II, III, and IV (laser + Ca (OH){sub 2}). As for groups V, VI, and VII, it has been observed fusion, re-solidification, and cracks, and these results being statistically significant when compared the '(Ca (OH){sub 2})' groups to the laser groups. No statistically significant differences were observed regarding the different powers applied in the groups that used the same treatment. Despite this result, it can be stated that powers above 1.0 W (DP = 125,38 W/cm{sup 2}) are unfavorable due to the undesirable morphologic alterations and aesthetic compromising. (author)

Fuzzy logic application for data correction of gamma ray profile and correlation with effective porosity of core from Resende Basin, Rio de Janeiro; Aplicacao da logica fuzzy para correcao de dados de perfil de raios gama e correlacao com porosidade efetiva de testemunhos da Bacia de Resende, Rio de Janeiro

Energy Technology Data Exchange (ETDEWEB)

Souza, Francisco de Assis Leal de; Tunala, Leonardo Fernandes; Abreu, Carlos Jorge de; Lopes, Ricardo Tadeu, E-mail: pachoteki@yahoo.com.br, E-mail: leotunala@hotmail.com, E-mail: abreu@geologia.ufrj.br, E-mail: ricardo@lin.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ/CCMN), RJ (Brazil). Centro de Ciencias Matematicas e da Natureza. Inst. de Geociencias. Dept. de Geologia; Rocha, Paula Lucia Ferrucio da, E-mail: ferrucio@acd.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil); Martins, Ricardo Rhomberg, E-mail: ricardo301@gmail.com [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola Politenica de Engenharia; Lima, Inaya Correa Barbosa, E-mail: inaya@lin.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Centro de Tecnologia

2010-12-15

This work presents here a study on the porosity of cores from Resende Basin (Rio de Janeiro). The first step involved the selection, thinning of the material (core) and sample preparation for the use of porosimeter to obtain effective porosity. The material studied is sandstone, friable, coarse to very fine of three wells (GPR1, GPR2 and GPR3). The fuzzy logic (MatLab) was applied to the effective porosity data calculated from the gamma ray (GR) profile for the construction of a synthetic profile and from this we could identify the errors made in calculating the data. Then the results of porosity from the core were correlated with data from the corrected effective porosity (gamma ray profile) in order to prove the results obtained with both methods. The analysis of the synthetic porosity calculated by the fuzzy logic has shown that this is a promising method for assessing the quality of data and to obtain good fits. (author)

Study of application of protective measures for the public and remediation of contaminated areas in case of nuclear and / or radiological accidents in Brazil; Estudo da aplicacao de medidas de protecao para o publico e de remediacao de areas contaminadas em caso de acidentes nucleares e/ou radiologicos no Brasil

Energy Technology Data Exchange (ETDEWEB)

Silva, Diogo Neves Gomes da

2011-07-01

Since the radiological accident in Goiania in 1987, the IRD (Institute of Radiological Protection and Dosimetry - IRD / CNEN) has been developing tools to support decision-making processes after a nuclear or radiological accident which leads to an environmental contamination and to an exposure of individuals the public These processes include the establishment of a supporting multicriteria model, which involves the application of protective and remediation measures of contaminated areas in tropical environments. In this study, it was performed an evaluation of the efficiency of these measures in order to determine the consequences of their implementation, based on results obtained from the code SIEM (Emergency Integrated System), which constitutes an environmental mode1 developed at IRD to simulate this type of accident. In order to perform this evaluation, it was first developed a database containing descriptions of various protection/remediation measures, which could be applied nationwide. Afterwards, some basic scenarios were established, considering the environmental, housing and food characteristics of the population of the vicinity of the nuclear power plants in Angra dos Reis (state of Rio de Janeiro). Thus, the accident simulations were carried out separately containing releases of {sup 137}Cs, {sup 90}Sr and 131 I. The results showed that the dose reduction varies according to the extent and the timing of the remediation measure applied. Although it is possible to establish some basic guidelines, generic solutions are not recommended, since the resulting doses are highly dependent on the actual situation. Any decision-making process should be made case by case, according to the actual conditions of the affected area and to the occupation characteristics and use of the affected areas, considering the characteristics of the source term of contamination, the time of the year in which the accident occurs, the local agricultural practices and food habits of real people affected. For both types of area, it was observed that it would be appropriate to assign the security measures according to three criteria: (i) its efficiency in reducing the doses in the first year, (ii) its efficiency in reducing the dose of long-term and (iii) the effect of delay in implementing the measure efficiency in reducing doses. Finally, the results of this work will be complemented in the database in order to provide support for multi-criteria analysis in decisionmaking process after this type of accident. (author)

Development and standardization of radioimmunoassay technique for human proinsulin determining and its use in the study of type II diabetes mellitus associated to obesity; Desenvolvimento e padronizacao da tecnica de radioimunoensaio para a determinacao de pro-insulina humana e sua aplicacao no estudo do diabetes mellitus tipo II associado a obesidade

Energy Technology Data Exchange (ETDEWEB)

Nascimento, Martha do

1997-12-31

The availability of immunoassay methodology for proinsulin is important to define its physiological and pathophysiological significance in humans. Serum concentration of proinsulin are elevated in patients with type II Diabetes Mellitus (NIDDM) and recently diagnosed Type I, so a raised circulating concentration of proinsulin may serve as an early indicator of {beta} cells dysfunction. recently, in NIDDM the serum concentrations of proinsulin and its B-chain-C-peptide junctional split form, des (31-32), were found to correlate with diastolic blood pressure, a risk factor for cardiovascular disease. The development of a sensitive and specific radioimmunoassay (RIA) methodology for proinsulin has been difficult due to its low concentration in serum and the presence of proinsulin conversion intermediates in fluids and tissues. Also other potentially cross-reactive peptides, including insulin and C-peptide, can interfere in the assay. This work describe a highly specific human proinsulin RIA developed by using biosynthetic human proinsulin (hPI) as immunogen, standard and tracer. (author) 133 refs., 17 figs., 36 tabs.

Inflammatory process decrease by gallium-aluminium-arsenide (GaAlAs) low intensity laser irradiation on postoperative extraction of impacted lower third molar; Reducao de processo inflamatorio com aplicacao de laser de arseneto de galio aluminio ({lambda}=830 nm) em pos-operatorio de exodontia de terceiros molares inferiores inclusos ou semi-inclusos

Energy Technology Data Exchange (ETDEWEB)

Atihe, Mauricio Martins

2002-07-01

This study aimed the observation of inflammatory process decrease by the use of GaAlAs Low Intensity Laser ({lambda}=830 nm; 40 mW) irradiation. Five patients were selected and submitted to surgery of impacted lower third molars, both right and left sides at different occasions. On a first stage, a tooth of a random chosen side - right or left - was extracted by conventional surgery, without LILT. The inflammatory process was measured at postoperative on the first, third and seventh days. This side was then called 'control side'. After 21 days, period in which the inflammatory process of the first surgery was terminated, the other side surgery took place, this time using LILT (4 J at four spots) at postoperative, first and third days. As the previous surgery, the inflammatory process was also measured at postoperative on the first, third and seventh days. This side was called 'experimental or lased side'. The inflammatory process was evaluated by measuring its four characteristic signs: swelling, pain, color and temperature. It was clearly observed a decrease for swelling, pain and color on the lased side which presented significant inference and descriptive statistics. It can be concluded that GaAlAs Low Intensity Laser ({lambda}=830 nm) can surely be used as an additional and important anti-inflammatory source on impacted lower third molar surgeries. (author)

Survey of nuclear parameters from the TRIGA Mark I IPR R1 Brazilian reactor with concentric configuration aiming the application of K{sub 0} neutron activation technique; Levantamento de parametros nucleares do reator TRIGA Mark I IPR R1 com configuracao concentrica visando a aplicacao da tecnica de ativacao neutronica K{sub 0}

Energy Technology Data Exchange (ETDEWEB)

Franco, Milton Batista

2006-07-01

This research intended to determine the nuclear parameters a, f, spectral index and neutron temperature in several irradiations positions of the TRIGA Mark 1 IPR-R1 reactor, for use on the parametric method K{sub 0} in the CDTN. K{sub 0} is a monostandard method of neutron activation analysis. It is, on the whole, experimentally simple, flexible and an important tool for accurate and convenient standardization in instrumental multi-element analysis. At the time the parameters were determined at the rotatory rack, lower layer and in the central thimble: alpha was calculated applying the three bare monitor method using {sup 197}Au, {sup 94}Zr and {sup 96}Zr; f determination was done according to the bare bi-isotopic method; neutron temperature was calculated through the direct method using {sup 176}Lu, {sup 94}Zr, {sup 96}Zr and {sup 197}Au and the Westcott's g(Tn) function for the {sup 176}Lu was calculated and the result was interpolated in the Grintakis and Kim (1975) Table, determining the neutron temperature. The procedure to check the parameters consisted in using standard solutions of Au (metal foil, NBS), Lu (LuO{sub 2}, Johnson Mattey Company - JMC) and Zr (ZrO{sub 2} and metal foil, Johnson Mattey Company 99,99% and Zry - 4: 98,14% of Zr, National Bureau of Standard- NBS). Several certified reference materials and two samples of intercomparisons (samples of sediment of the IAEA/ARCAL XXVI project) have been analysed by means of k{sub 0}- INAA in order to verify the efficiency of the method and the quality of the parameters. The certified reference materials were: GXR-2, GXR-5 and GXR-6 of the United States Geological Survey (USGS) and Soil-5, Soil-7 and SL-1 of the International Atomic Energy Agency (IAEA). (author)

Principal component analysis for verifying {sup 1}H NMR spectral assignments. The case of 3-aryl (1,2,4)-oxadiazole-5-carbohydrazide benzylidene; Aplicacao de analise de componentes principais para verificacao de atribuicoes de sinais nos espetros de RMN 1H. O caso dos 3-aril (1,2,4)-oxadiazol-5-carboidrazida benzilidenos

Energy Technology Data Exchange (ETDEWEB)

Silva, Joao Bosco P. da; Malvestiti, Ivani; Hallwass, Fernando; Ramos, Mozart N. [Pernambuco Univ., Recife, PE (Brazil). Dept. de Quimica Fundamental]. E-mail: paraiso@ufpe.br; Leite, Lucia F.C. da Costa [Universidade Catolica de Pernambuco, Recife, PE (Brazil). Dept. de Quimica; Barreiro, Eliezer J. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Faculdade de Farmacia

2005-06-01

The {sup 1}H NMR data set of a series of 3-aryl (1,2,4)-oxadiazole-5-carbohydrazide benzylidene derivatives synthesized in our group was analyzed using the chemometric technique of principal component analysis (PCA). Using the original 1H NMR data PCA allowed identifying some misassignments of the proton aromatic chemical shifts. As a consequence of this multivariate analysis, nuclear Overhauser difference experiments were performed to investigate the ambiguity of other assignments of the ortho and meta aromatic hydrogens for the compound with the bromine substituent. The effect of the 1,2,4-oxadiazole group as an electron acceptor, mainly for the hydrogens 12,13, has been highlighted. (author)

Application of the probe Horiba U-23 in the analysis of physical-chemical parameters of groundwater influences on the Osamu Utsumi uranium mine in Caldas-MG; Aplicacao da sonda Horiba U-23 na analise de parametros fisico-quimicos das aguas subterraneas sobre influencia da mina de uranio Osamu Utsumi em Caldas-MG

Energy Technology Data Exchange (ETDEWEB)

Moreira, Flavio H.S., E-mail: flaviohsmoreira2@gmail.com [Universidade Federal de Alfenas (UNIFAL), Pocos de Caldas, MG (Brazil); Alberti, Heber L.C.; Silva, Nivaldo C., E-mail: heber@cnen.gov.br, E-mail: ncsilva@cnen.gov.br [Comissao Nacional de Energia Nuclear (LAPOC/CNEN-MG), Pocos de Caldas, MG (Brazil). Laboratorio de Pocos de Caldas; Fleming, Peter Marshall, E-mail: pmf@cnen.gov.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, BH (Brazil)

2013-07-01

This study presents data on the analysis of physical-chemical parameters of groundwater in the uranium mine Osamu Utsumi, belonging to the Industrias Nucleares do Brasil - INB, in the municipality of Caldas. This work is part of the team responsible for the evaluation of Plano de Recuperacao de Areas Degradadas (PRAD), team consists of researchers from Laboratorio de Pocos de Caldas - LAPOC and of the Centro de Desenvolvimento Tecnologico Nuclear - CDTN, units of the Comissao Nacional de Energia Nuclear - CNEN. Sampling was carried out in eleven wells in the 'bota-fora 4' area and digs mine. Analyses of groundwater quality were performed using the multiparameter probe Horiba U23, recent acquisition of LAPOC. The results characterize the groundwater of ten wells monitored as acidic and with a high electrical conductivity, due to the impacts caused by drainage Mining Acid (DAM)

Optical and structural characterization of the pure and doped BaY{sub 2}F{sub 8} with rare earths for application in radiation detectors and scintillators; Caracterizacao optica e estrutural do BaY{sub 2}F{sub 8} puro e dopado com terras raras visando aplicacao em detectores de radiacao e cintiladores

Energy Technology Data Exchange (ETDEWEB)

Mello, Ana Carolina Santana de

2008-07-01

In this work Barium Yttrium Fluoride (BaY{sub 2}F{sub 8} -BaYF) doped with different concentrations of ions Tb{sup 3+}, Er{sup 3+}, Tm{sup 3+} e Nd{sup 3+} were characterized, aiming the application in radiation detection devices that use the scintillating properties. Two types of samples were produced in the CLA-IPEN-SP, polycrystalline samples, obtained via solid state reaction of BaF{sub 2} and YF{sub 3} under HF atmosphere, and single crystals, obtained via the zone melting method also in a HF atmosphere. The samples were characterized using the following experimental techniques: X-ray powder diffraction, Radioluminescence (RL), Optical Absorption and Dispersive X-ray Absorption Spectroscopy (DXAS). The X-ray diffraction pattern showed the presence of the phase BaY{sub 2}F{sub 8} and a small amount of the phase Ba{sub 4}Y{sub 3}F{sub 17} in the polycrystalline pure and Tb{sup 3+}doped samples. The other samples showed only the desired BaY{sub 2}F{sub 8} phase. The radioluminescence measurements of the doped BaYF, when irradiated with X-rays, showed emission peaks in energies that are characteristics of the 4f-4f transitions of rare earths. The RL of the samples with 2 mol por cent and 3 mold of Tb{sup 3+}showed quite intense peaks with a maximum emission peak at 545 nm. The Tm{sup 3+}doped BYF showed that the scintillation efficiency is not directly proportional to the doping level, and the highest RL emission were obtained for the polycrystalline samples doped with 1 mol por cent, showing a maximum peak intensity at 456 nm (the blue region of the visible spectrum). All samples showed a phosphorescent decay time of the order of seconds. Single crystals of BaYF doped with 2 mol por cent of Er{sup 3+}, in addition to one of the highest phosphorescence time, presents a quite strong Rl in the green region of the spectra. The radiation damage was evaluated by the optical absorption techniques and the results showed that the formation of the absorption bands can be connected to colors centers generated by radiation in the matrix. Measurements of DXAS, done at the LNLS DXAS beamline, revealed that there is no change in the absorption edge of the dopant during irradiation. Among ali samples, the Nd{sup 3+} ones presented the lowest scintillation efficiency with maximum emissions in the infrared region. (author)

Application of Zr/Ti-Pic in the adsorption process of Cu(II), Co(II) and Ni(II) using adsorption physico-chemical models and thermodynamics of the process; Aplicacao de Zr/Ti-PILC no processo de adsorcao de Cu(II), Co(II) e Ni(II) utilizando modelos fisico-quimicos de adsorcao e termodinamica do processo

Energy Technology Data Exchange (ETDEWEB)

Guerra, Denis Lima; Airoldi, Claudio [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Inst. de Quimica. Dept. de Quimica Inorganica]. E-mail: dlguerra@iqm.unicamp.br; Lemos, Vanda Porpino; Angelica, Romulo Simoes [Universidade Federal do Para (UFPa), Belem (Brazil); Viana, Rubia Ribeiro [Universidade Federal do Mato Grosso (UFMT), Cuiaba (Brazil). Inst. de Ciencias Exatas e da Terra. Dept. de Recursos Minerais

2008-07-01

The aim of this investigation is to study how Zr/Ti-Pic adsorbs metals. The physico-chemical proprieties of Zr/Ti-Pic have been optimized with pillarization processes and Cu(II), Ni(II) and Co(II) adsorption from aqueous solution has been carried out, with maximum adsorption values of 8.85, 8.30 and 7.78 x-1 mmol g{sup -1}, respectively. The Langmuir, Freundlich and Temkin adsorption isotherm models have been applied to fit the experimental data with a linear regression process. The energetic effect caused by metal interaction was determined through calorimetric titration at the solid-liquid interface and gave a net thermal effect that enabled the calculation of the exothermic values and the equilibrium constant. (author)

Characterization of cathode materials SrCoO3 and La0,2Sr0,8CoO3 for use in solid oxide fuel cells (SOFC); Caracterizacao de materiais catodicos SrCoO3 e La0,2Sr0,8CoO3 para aplicacao em celulas a combustivel de oxido solido (SOFC)

Energy Technology Data Exchange (ETDEWEB)

Galvao, G.O.; Aquino, F.M; Silva, R.M.; Medeiros, I.D.M. de, E-mail: gabriela.galvao@cear.ufpb.br [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil)

2016-07-01

Mixed oxide ceramics with chemical structure of ABO{sub 3} type are promising candidates for cathodes of solid oxide fuel cells (SOFC) for performing well on the electrical conductivity and thermal stability. Various methods of preparation have been studied and used for the synthesis of these materials. In this study, SrCoO{sub 3} and La{sub 0,2}Sr{sub 0,8}CoO{sub 3} perovskites were synthesized using gelatin as directing agent with the purpose of producing homogeneous and porous particles. The powders obtained at 350 ° C / 2 h were calcined at 600, 800 and 1000 ° C for 4 hours and characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that gelatin is a good polymerizing agent for metal ions as the material showed characteristic peaks of perovskite, with good porosity and uniformity. Furthermore, the method of synthesis employed has advantages related to cost and toxicity, which are very low. (author)

A study on copper and zinc effects in the growth of Aechmea blanchetiana (Baker) L.B. Smith seedlings cultivated in vitro. Application of neutron activation analysis; Estudo sobre os efeitos do cobre e zinco no crescimento da plantula de Aechmea blanchetiana (Baker) L.B. Smith cultivada in vitro. Aplicacao da analise por ativacao com neutrons

Energy Technology Data Exchange (ETDEWEB)

Zampieri, Maria Cristina Tessari

2010-07-01

Metals are components of the biosphere, occurring naturally in soil and plants, but as a result of human actions, their levels have been greatly increased, depending on the region. Copper (Cu) and zinc (Zn) are essential for the growth and development of plants, however if in excess become toxic. The aim of this study was to evaluate the potential of plants to absorb Cu and Zn and what effects they cause in seedlings cultivated in vitro. The results of this study may contribute primarily in agricultural and environmental research. The plant investigated was the Aechmea blanchetiana species of the Bromeliaceae family. It is a terrestrial or epiphytic species used as an ornamental plant. The cultivation of seedlings for this study and their exposure to different concentrations of Cu and Zn were performed at the Institute of Botany (IBt) of Sao Paulo. After seed germination, the seedlings were transferred for growth in a culture media containing different concentrations of Cu or Zn. After this period of in vitro cultivation, the seedlings were analyzed for morphometry, anatomy and by neutron activation analysis. Quality control of the results from neutron activation analysis was carried out by the analysis of certified reference materials. The data obtained showed good precision and accuracy for several elements determined. The highest concentrations of Cu used in the exposure were those that caused major structural changes in morphometric and anatomical parameters, however for the Zn no significant differences were verified for most parameters. The A. blanchetiana proved to be a bioaccumulator species of Zn, absorbing high levels of this element in the aerial parts and roots. (author)

Validation of the extension of the range of application and of the single system of injection for the determination of total nitrogen in petroleum and its derivatives by chemiluminescence; Validacao da ampliacao da faixa de aplicacao e do sistema unico de injecao para a determinacao de nitrogenio total em petroleos e derivados por quimiluminescencia

Energy Technology Data Exchange (ETDEWEB)

Santos, Maria de Fatima Pereira dos [Fundacao Gorceix, Ouro Preto, MG(Brazil)]. E-mail: santos@cenpes.petrobras.com.br; Tamanqueira, Juliana Boechat [Universidade Federal Fluminense, Niteroi, RJ (Brazil); Magalhaes, Julio Cesar Dias [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas. Avaliacao de Petroleo; Oliveira, Elcio Cruz de [Transpetro, Rio de Janeiro, RJ (Brazil). Logistica e Planejamento; Vaitsman, Delmo Santiago [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Quimica. Dept. de Quimica Analitica

2003-12-01

With the objectives of using a single system of injection and of extending the range of application for the method ASTM D4629/02 'Total Nitrogen in Petroleum Derivatives by the System of Injection with a Syringe and Detection by Chemo- Luminescence', it was studied a procedure by statistical validation with the objective of guaranteeing the analytical reliability of the assay and allowing the inclusion of samples of petroleum and heavy derivatives in one single methodology. The determination of total nitrogen for petroleum and derivatives is traditionally assayed using the method of Kjeldahl - a time-consuming methodology that requires a large amount of time for giving the final result, at the same time that is not recommended for concentrations below 0.1%w/w, which does not meet the requirements for the specifications of the product, in the petroleum industry. An alternative for the method of Kjeldahl is the pyro-chemo luminescence, which allows the achievement of more repetitive results for total nitrogen. In the detection of nitrogen, the technique combines the reliability of oxidative combustion with the sensitivity of chemiluminescence. Therefore, it was developed a protocol of validation in the methodology ASTM D4629/02 for the validation of the extension of the range of application and for the evaluation of the performance of the equipment in analytical conditions, according to the calibration curve. (author)

Synthesis of zeolites coal ash in surfactant modified in application and removal of orange 8 acid solution: study in batch, fixed bed column and evaluation ecotoxicological; Sintese de zeolitas de cinzas de carvao modificada por surfactante e aplicacao na remocao de acido laranja 8 de solucao aquosa: estudo em leito movel, coluna de leito fixo e avaliacao ecotoxicologica

Energy Technology Data Exchange (ETDEWEB)

Magdalena, Carina Pitwak

2015-09-01

In this study, synthesized zeolitic material from coal ash and modified cationic surfactant was used for removing the acid dye Orange 8 (AL8) by adsorption process using moving bed and fixed-bed column. The raw material and adsorbents were characterized by different techniques, such as X-ray diffraction, X-ray fluorescence spectroscopy, among others. The adsorption of AL8 was performed by moving bed in order to optimize the results when they are launched in a fixed bed. The effects of adsorption on zeolite AL8 were compared: (1) Effect of counterions Br{sup -} and Cl{sup -} surfactant used in the modification of the zeolite; (2) effect of type of coal ash used as raw material in the synthesis of zeolites (fly and bottom). The following adsorbents were used in the study: fly and bottom zeolite modified by surfactant hexadecyltrimethylammonium bromide (ZLMS-Br-Br and ZPMS-Br) and fly zeolite modified by surfactant hexadecyltrimethylammonium chloride (ZLMS-Cl). The pseudo-second-order kinetic described the adsorption of the dye on all adsorbents. The equilibrium time was reached 40, 60 and 120 min for ZLMS-Br, ZLMS-Cl and ZPMS-Br, respectively. The adsorption equilibrium was analyzed by the equations of the models of linear and nonlinear isotherms of Langmuir, Freundlich, Temkin and Dubinin- Radushkevivh (DR) and the criterion of best fit was evaluated using the error functions.The DR model was adjusted better to the experimental data for the system AL8 / ZLMS-Br, the Freundlich model for AL8 / ZLMS-Cl and Langmuir for AL8 / ZPMS. According to the Langmuir maximum adsorption capacity was 4.67, 1.48 and 1.38 mg g{sup -1} for ZLMS-Br, ZLMS-Cl and ZPMS-Br, in order. In studies employing fixed bed columns, the effects of inlet concentration (20- 30 mg L{sup -1}), flow rate (4.0 -5.3 mL min{sup -1}) and the bed height (5, 5 - 6.5 cm) above the breakthrough curves characteristics in the adsorption system were determined. The Adams-Bohart, Thomas, Yoon-Nelson models were applied to experimental data to predict the breakthrough curves and to determine the parameters that characterize the column. The mathematical models of Thomas and Yoon-Nelson adjusted well to the data of breakthrough curves. The highest bed capacity of 5.3 mg g{sup -1} was obtained using 30 mg L{sup -1} inlet Acid Orange 8 concentration, 5.5 cm bed height and 5.3 mL min{sup -1} flow rate. Acute ecotoxicity tests using Daphnia similis microcrustacean with wastewater (AL8) and after treatment with surfactant modified zeolite were carried out with the purpose of evaluating evidence of possible contamination when launched on the receiving water body. The results of this study showed that samples AL8 dye in aqueous solution does not show any toxic effect, and the treated samples showed toxicity with ZLMS-Br. (author)

Quality, health and environment system integrated application in the processes of drilling, completion and work over fluids and waste management in the exploration and production activities; Aplicacao do sistema de gestao integrada de qualidade, saude, meio ambiente e seguranca nos processos de fluidos de perfuracao, completacao, workover e gerenciamento de residuos nas atividades de E e P

Energy Technology Data Exchange (ETDEWEB)

Franca Filho, Jose; Chio, Alessandra F.; Sa, Carlos M. de [M-I Swaco do Brasil - Comercio, Servicos e Mineracao Ltda., Mossoro, RN (Brazil). Quality, Health, Safety and Environmental

2004-07-01

This paper describes the strategy developed by M-I SWACO Brasil for identification of the need for implementation and management of a system that in an integrated way attended to the requirements of Quality, Health, Environment and Safety in the processes of drilling, completion and work over fluids and waste management in the E and P activities involving all steps, from planning to execution of the projects. The Integrated Management System was based on requirements of the international standards ISO 9001:2000, ISO 14001:1996 and OHSAS 18001:1999 and on internal corporate requirements as the HSE Management System. The conception of IMS is associated to a preventive posture, with the identification, evaluation and control of environmental and occupational risks, as well as the compliance to the products quality requirements and services related to the processes of fluids and waste management, with a systemic vision in that all those segments were managed in a integrated way. The system propitiated a better management of the processes and of the aspects of Quality, Health, Environment and Safety, increasing the awareness and the proactive attitude with the commitment of all levels of the company, adding value in the services and products, being a differentiation factor for customers, suppliers and community. (author)

Application of the perturbed angular correlation in the investigation of hyperfine interactions in compounds of hafnium, indium and cadmium with F{sup 1-}, OH{sup 1-} and EDTA ligands; Aplicacao da espectroscopia de correlacao angular perturbada na investigacao de interacoes hiperfinas em compostos de hafnio, indio e cadmio com os ligantes F{sup 1-}, OH{sup 1-} e EDTA

Energy Technology Data Exchange (ETDEWEB)

Amaral, Antonio Acleto

2011-07-01

In this study the hyperfine parameters, including the dynamical nature, Perturbed Angular Correlation (PAC) spectroscopy was used to measure the hyperfine parameters in molecules of ligand compounds in solutions. The measurements were carried out at 295 K and 77 K using {sup 111}In {yields} {sup 111}Cd, {sup 181}Hf {yields} {sup 181}Ta and {sup 111m}Cd {yields}{sup 111}Cd, as probe nuclei. Samples were prepared by adding a small volume of radioactive solution containing the probe nuclei in aqueous solution, buffer solution and ethylenediaminetetraacetic acid (EDTA) used as a ligand with pH 4.3 which correspond to the pH of the saturated EDTA solution and in buffer solution with pH between 9 and 10. The results made possible to understand the impact of each method for PAC measurements. Finally a comparative analysis for the several methods of inserting of the probe nuclei in the sample was made, considering chemical and nuclear aspects. The lack of measurements in this kind of samples justifies the importance of the obtained results. (author)

Study of {sup 137}Cs e {sup 60}Co sorption in sediments from Saco de Piraquara de Fora, Angra dos Reis and its application for environmental monitoring; Estudo da sorcao de {sup 137}Cs e {sup 60}Co em sedimentos do Saco de Piraquara de Fora em Angra dos Reis e sua aplicacao para o monitoramento ambiental

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Ingryd Marques

2016-08-01

Both the suspended solid particles and the bed sediments sorb radionuclides, released in water systems. Sorption is usually represented mathematically by the distribution coefficient that is based in equilibrium between phases. Here the adsorption/desorption kinetics of {sup 60}Co and {sup 137}Cs in sea water were simulated by batch equilibrium experiments with sediments in two points (PT - 01, PT - 02) from Saco de Piraquara de Fora inlet (SPF). For both radionuclides, partition coefficient values (Kd) for the sampling point PT - 02 (509 and 385 L/kg for {sup 60}Co and {sup 137}Cs, respectively) were higher than the values determined for PT - 01 one (426 and 182 L/kg for {sup 137}Cs and {sup 60}Co, respectively). The higher values of Kd of PT-02 reflects the higher CEC (71,4 cmolc.dm{sup 3}) and content of mud < 63 μm (87%) when compared to PT-01 (CEC of 39,5 cmol{sub c}.dm{sup 3}) and mud (55%). In comparison with the values reported in the literature, the found Kd values are low, which may be related to the predominance of kaolinite, which is a clay of low sorption capacity. The Kd values with an increase in temperature of 23 deg C to 27 deg C were similar ({sup 60}Co in PT-02 and {sup 137}Cs in both sediment) or 27 ° C values were higher ({sup 60}Co the PT-01). With increasing temperature to 31 °C Kd values for the two radionuclides showed a decrease. However, increasing temperature increases the desorption of the two radionuclides for both sediments The sorption process is spontaneous and favorable for both sediments and the model of sorption can be fitted by both Freundlich and Langmuir sorption isotherms. The maximum amount of {sup 60}Co that can be sorbed on sediments were 1,64 10{sup -5} moles/g (4,12 10{sup 10} Bq/g) and 2,79 10{sup -5} moles/g (7,03 10{sup 10} Bq/g) to PT-01 and PT-02, respectively, and of {sup 137}Cs 1,99 10{sup -6} moles/g (9,70 10{sup 8} Bq/g) and 6,60 10{sup -6} mol/g (2,87 10{sup 9} Bq/g ) to PT-01 and PT-02. Two areas in SPF can potentially accumulate {sup 137}Cs: sediments located near the effluent discharge and the area located north of this site. An area in the interface of SPF and the bay of Ribeira would potentially the best accumulated of {sup 60}Co. (author)

Synthesis and characterization of La{sub 1-x}Sr{sub x}MnO{sub 3} (x=0,1) for cathode application in solid oxide fuel cells (SOFC); Sintese e caracterizacao de La{sub 1-x}Sr{sub x}MnO{sub 3} (x=0,1) visando sua aplicacao como catodo em celulas a combustivel de oxido solido (SOFC)

Energy Technology Data Exchange (ETDEWEB)

Tarrago, D.P.; Sousa, V.C., E-mail: dptarrago@gmail.co [Universidade Federal do Rio Grande do Sul (LABIOMAT/PPGEM/UFRGS), Porto Alegre, RS (Brazil). Programa de Pos graduacao em Engenharia de Minas. Lab. de Biomateriais; Malfatti, C.F. [Universidade Federal do Rio Grande do Sul (LAPEC/PPGEM/UFRGS), Porto Alegre, RS (Brazil). Programa de Pos graduacao em Engenharia de Minas. Lab. de Pesquisa em Corrosao

2010-07-01

Perovskite powders, with composition La{sub 1-x}Sr{sub x}MnO{sub 3} (x=0,1) were obtained via combustion synthesis using sucrose as fuel. In the X-ray diffraction patterns it was observed that in order to obtain a single phase and well crystallized material a calcination in 750 deg C for 3 hours was necessary. BET analysis detected a specific surface area of 45m{sup 2}/g, considerably higher than when obtained with other fuels. SEM micrographs revealed a spongy aspect with a connected porosity in the agglomerates and though TEM micrographs the presence of pores in the particles was verified. The powder compacted with 125MPa and sintered at 1050 deg C for two hours presented a 31% open porosity and the SEM micrographs showed a fine interconnected porosity. (author)

Analysis of the productive chain of Brazilian oil sector in the midst of ethics in the application of productive excess, social and environmental responsibility and ensuring the quality of life; Analise da cadeia produtiva do setor petrolifero brasileiro em meio a etica na aplicacao dos excedentes produtivos, a responsabilidade social e ambiental e a garantia da qualidade de vida

Energy Technology Data Exchange (ETDEWEB)

Mello, Liodoro de; Domingos, Sergio Ricardo; Santos, Adilson Francisco dos [Universidade Federal de Itajuba (UNIFEI), MG (Brazil). Grupo de Engenharia da Energia

2004-07-01

The present work analyses the petroliferous productive chain, of the well you the rank. It shows the correlation with the ethics, the social responsibility and the guarantee of the quality of life human being. It considers it lives rational application of paid the resources preceding from royalties you the states and cities. With the reorganization of the petroliferous sector, in the second half of the decade of 90, lives specifically, with the edition of the Law n. 9.478/97, the decisions, until then, prevailed will be unilateral orientates of the federal government starts you count on the market, mediating agent of offers and demand. You the edition of the legal order, you the current days, the excellent facts ploughs dealt with transparency, the teams that if instituted the ANP, agency of regulating to character. The sector, with this, must give counterpart you the society, in the direction you reward the same one, will be possible damages or provoked aggressions, exactly that in involuntary way. Ethical The resolution of the conflicts follows an line of respect you the agents: companies, government and consumers. First with programs of professional qualification, the security, of institutional landmark, they stimulate the perfect competition and applies the exploratory balances in the form of royalties. And, the consumers, not less important, intent to ambient questions, demands quality US products. (author)

Synthesis and characterization of nanoparticles ferrites of the type ZN{sub x}Cu{sub 1-x}FE{sub 2}O{sub 4} and your application catalyst in acetylation vegetable oils; Sintese e caracterizacao de nanoparticulas de ferritas do tipo Zn{sub x}Cu{sub 1-x}Fe{sub 2}O{sub 4} e a sua aplicacao como catalisador em acetilacao em oleos vegetais

Energy Technology Data Exchange (ETDEWEB)

Casagrande, D.S; Costa, W.V; Hechenleitner, A.A.W.; Oliveira, D.M.F. de; Pineda, E.A.G., E-mail: diogo_casagrande@msn.com [Universidade Estadual de Maringa (UEM), PR (Brazil)

2016-07-01

In this work were synthesized copper and zinc ferrites (0 - 10% mol with respect to copper), by the combustion method, using citrate as stabilizer. The obtained products were analyzed by Infrared spectrometry (FTIR), Raman spectroscopy (RAMAN) and x-ray diffractometry (DRX). Synthesized ferrites present hematite phase, maghemite phase and copper ferrite phases. The analysis indicated that increasing the zinc content leads to decreased of hematite phase. Increasing of zinc content lead to an increase of particle size. The best results of oil acylation were obtained with ferrites containing 2 and 4% of zinc, wherein the increase the increase of yield of acetylated product reached at 19% when compared with the yield obtained whit copper ferrite without zinc. (author)

Optimization of surface network and platform location using a next generation reservoir simulator coupled with an integrated asset optimizer application to an offshore deep water oil field in Brazil; Otimizacao de redes de superficie e locacao da plataforma atraves do acoplamento de um simulador de reservatorios de nova geracao e um otmizador global de ativo: aplicacao em um campo offshore

Energy Technology Data Exchange (ETDEWEB)

Campozana, Fernando P.; Almeida, Renato L. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Madeira, Marcelo G.; Sousa, Sergio H.G. de; Spinola, Marcio [Halliburton Servicos Ltda., Rio de Janeiro, RJ (Brazil)

2008-07-01

To design, modify, and expand surface facilities is a multidisciplinary task which involves substantial financial resources. It can take months or years to complete, depending on the size and level of detail of the project. Nowadays, the use of Next Generation Reservoir Simulators (NGRS) is the most sophisticated and reliable way of obtaining field performance evaluation since they can couple surface and subsurface equations, thus eliminating the need of lengthy multiphase flow tables. Furthermore, coupling a NGRS with an optimizer is the best way to accomplish a large number of simulation runs on the search for optimized solutions when facilities are being modified and/or expanded. The suggested workflow is applied to a synthetic field which reproduces typical Brazilian offshore deep water scenarios. Hundreds of coupled simulation runs were performed and the results show that it is possible to find optimal diameters for the production lines as well as the ideal location for the production / injection platform. (author)

Topics to study the integrated use of natural gas in the electricity with industrial focus: a methodology for optimizing its use with application in the Vale do Paraiba region (SP-Brazil); Topicos para o estudo da utilizacao integrada do gas natural na eletricidade com enfoque industrial: uma metodologia para otimizacao de seu aproveitamento com aplicacao na regiao do Vale do Paraiba

Energy Technology Data Exchange (ETDEWEB)

Paro, Andre C.; Borelli, Samuel J.S. [PROMON Engenharia SA, Sao Paulo, SP (Brazil); Santos, Edmilson M. [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia; Fadigas, Eliane A. [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica

2004-07-01

After the recent announcement on the discovery of a large amount of Natural Gas (NG) in the Santos Field by PETROBRAS, use incentive policies for its consumption and consequent growth participation in the national energy matrix gained strength This paper intends to present an efficient use optimization methodology for the NG integrated to Electricity with focus on it's industrial use under the concepts of Integrated Resources Planning (IRP). Thus, the topics about NG utilization in cogeneration plants are analyzed, showing it's utilization on Electric Energy (EE) and Process Heat (Steam) supply. Its contribution to the distributed Electric Energy generation, which brings the installed generation power closer to the consumer centers and mitigates energy transmission losses, are also presented. The IRP concept is applied on the integration between industrial use and other uses of NG and on the detailing of its influence on the electric sector. Finally, a case study is presented, applying the presented methodology for the use of NG in the industry of 'Vale do Paraiba' Region (SP-Brazil), due to its industrial economy condition and easy access to the Brazilian proved reserves geographic condition. (author)

Implementation of a computational system at the Center for Nuclear Technology Development, for systematization the application of the FMEA - Failure Mode and Effects Analysis, for identification of dangerous and developed risks evaluation; Implementacao de um sistema computacional no Centro de Desenvolvimento da Tecnologia Nuclear para sistemarizar a aplicacao da tecnica FMEA - Failure Mode and Effects Analysis - na identificacao de perigos e avaliacao de riscos desenvolvida

Energy Technology Data Exchange (ETDEWEB)

Correa, Danyel Pontelo; Vasconcelos, Vanderley de, E-mail: dpc@cdtn.b, E-mail: vasconv@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2009-07-01

The regulatory bodies request risks evaluations for nuclear and radioactive licensing purposes. In Brazil those evaluations are contained by the safety analysis reports requested by the Brazilian Nuclear Energy Commission (CNEN), and risk analysis studies requested by the environment organisms. A risk evaluation includes the identification of the risks and the accident sequence which can occur, and the estimation of the frequency and his undesirable effects on the industrial installations, the public, and the environment. The identification and the risk analysis are particularly important for the implementation of a health, environment and safety integrated management according to the regulation instruments ISO 14001, BS 8800 and OHSAS 18001. The utilization of the risk identification techniques and the risk analysis is performed at the non nuclear industry, in a non standard form by the various sectors of an enterprise, diminishing the effectiveness of the recommended actions based on risk indexes. However, for the nuclear licensing, the CNEN request through their regulatory instruments and standard formats, that the risks, the failure mechanisms and detection be identified, which can allow the preventive and mitigate actions. This paper proposes the utilization of the FMEA (Failure Mode and Effects Analysis) technique in the licensing process. It was implemented a software through the Excel program, using the Visual Basic for Applications program which allows the automation and the standardization of FMEA studies as well

Application of a portable equipment EDXRF (energy dispersive X-ray fluorescence) in the monitoring of the restoration work of murals paints in the Church of Paroquia Imaculada Conceicao (Sao Paulo, SP); Aplicacao de um equipamento portatil de EDXRF (fluorescencia de raios X por dispersao em energia) no acompanhamento dos trabalhos de restauro de pinturas murais na igreja da Paroquia Imaculada Conceicao (Sao Paulo, SP)

Energy Technology Data Exchange (ETDEWEB)

Appoloni, Carlos Roberto; Parreira, Paulo Sergio, E-mail: appoloni@uel.b, E-mail: parreira@uel.b [Universidade Estadual de Londrina (UEL), PR (Brazil); Rizzo, Marcia [MRizzo Restauracoes - Laboratorio de Conservacao e Restauracao de Bens Culturais Ltda., Sao Paulo, SP (Brazil)

2006-07-01

This paper presents the application of the portable EDXRF (energy dispersive X-ray fluorescence) of the Laboratorio de Fisica Nuclear Aplicada of the Universidade Estadual de Londrina in the analysis in situ of pigments in wall paintings, as well as in monitoring restoration processes

Application of neutron activation analysis to the determination of total mercury and other elements of interest in soil and sediment samples from Serra do Navio and Vila Nova River Basin, Amapa, Brazil; Aplicacao do metodo de ativacao neutronica a determinacao do mercurio total e outros elementos de interesse em amostras de solo e sedimento da Serra do Navio e Bacia do Rio Vila Nova, Amapa

Energy Technology Data Exchange (ETDEWEB)

Goncalves, Cristina

1997-07-01

In this work it is presented a survey on total mercury determination by a radiochemical method in sediment and soil samples from two regions, in the state of Amapa: Serra do Navio (background area) and Vila Nova river basin (gold mining area). The method consisted in leaching of the irradiated samples with acqua regia in a Parr bomb, and heating in microwave oven, for one minute. Then the solvent extraction technique was applied, using bismuth diethyldithiocarbamate (Bi(DDC){sub 3}) as extractant agent. The organic phase, containing {sup 197}Hg and {sup 203}Hg radioisotopes, was measured in a gamma spectrometer with hyper pure Ge detector. This method eliminated the interference of the 279.54 keV photopeak of {sup 75}Se on 279.2 keV photopeak of {sup 203}Hg, besides improving counting statistics of both Hg radioisotopes. The elements As, Ba, Br, Ce, Co, Cr, Cs, Eu, Fe, Hf, Ho, K, La, Lu, Mg, Mn, Na, Nd, Rb, Sb, Sc, Se, Sm, Ta, Tb, Th, Ti, U, V, W, Yb, Zn and Zr were also determined by the instrumental neutron activation analysis. Two irradiation series were carried out to quantify these elements in soil and sediment samples; a short term irradiation allowed to evaluate Mg, Mn, Na, Ti and V levels, and by long term irradiation, the other elements were determined. Precision and accuracy of radiochemical procedure were verified by means of analysis of the reference materials Buffalo River Sediment and Lake Sediment, for sediments and GXR-5, for soils. For the instrumental analysis, the reference materials Buffalo River Sediment, Soil 7, JB-1 and Oyster Tissue were used. The samples were also submitted to X ray diffraction, in Instituto de Geoscience-USP, to observe mercury behaviour with mineralogy. Aluminium concentration was determined by X ray fluorescence method, in the Department of Materials, IPEN/CNEN-SP, making possible enrichment factor calculation so that mercurial contamination in the gold mining area (Vila Nova river basin) could be evaluated. The mercury levels obtained in this work were compared to those from other Brazilian regions, where the gold mining activities are being carried out, releasing this metal to the environment. To the multielemental results, it was applied Varimax rotation factorial analysis to verify geochemistry signature of the soils and sediments from both studied regions, besides Pearson similarity correlation test application and comparison to average values of terrestrial crust. (author)

Study in vitro of dental enamel irradiated with a high power diode laser operating at 960 nm: morphological analysis of post-irradiation dental surface and thermal effect analysis in pulp chamber due to laser application; Estudo in vitro do esmalte dental irradiado com laser de diodo de alta potencia em 960 nm: analise morfologica da superficie dental pos-irradiada e analise do comportamento termico na camara pulpar devido a aplicacao laser

Energy Technology Data Exchange (ETDEWEB)

Quinto Junior, Jose

2001-07-01

Objectives: This study examines the structural and thermal modifications induced in dental enamel under dye assisted diode laser irradiation. The aim of this study is to verify if this laser-assisted treatment is capable to modify the enamel surface by causing fusion of the enamel surface layer. At the same time, the pulpal temperature rise must be kept low enough in order not to cause pulpar necrosis. To achieve this target, it is necessary to determine suitable laser parameters. As is known, fusion of the enamel surface followed by re-solidification produce a more acid resistant layer. This surface treatment is being researched as a new method for caries prevention. Method and Materials: A series of fourteen identically prepared enamel samples of human teeth were irradiated with a high power diode laser operating at 960 nm and using fiber delivery. Prior to irradiation, a fine layer of cromophorous ink was applied to the enamel surface. In the first part of the experiment the best parameter for pulse duration was determined. In the second part of the experimental phase the same energy density was used but with different repetition rates. During irradiation we monitored the temperature rise in the pulpal cavity. The morphology of the treated samples was analysed under SEM. Results: The morphology of the treated samples showed a homogeneously re-solidified enamel layer. The results of the temperature analysis showed a decrease of the pulpal temperature rise with decreasing repetition rate. Conclusion: With the diode laser it is possible to cause morphological alterations of the enamel surface, which is known to increase the enamel resistance against acid attack, and still maintain the temperature rise in the pulpar chamber below damage threshold. (author)

Comparative study of perovskite Pr{sub (1-x)}Ca{sub x}CoO{sub 3} e Gd{sub (1-x)}Ca{sub x}CoO{sub 3} (x=0,2) synthesized by gelatin modified route for application in automotive catalysis; Estudo comparativo das perovsquitas Pr{sub (1-x)}Ca{sub x}CoO{sub 3} e Gd{sub (1-x)}Ca{sub x}CoO{sub 3} (x=0,2) sintetizadas pela rota modificada gelatina para aplicacao em catalise automotiva

Energy Technology Data Exchange (ETDEWEB)

Araujo, E.M. de; Medeiros, M.R.A.; Paiva, A.K.O.; Borges, F.M.M., E-mail: eduardamedeirosdearaujo@gmail.com [Universidade Federal do Rio Grande do Norte (UFRN), RN (Brazil); Ruiz, J.A.C. [Centro de Tecnologia do Gas e Energias Renovaveis (CTGAS-ER), RN (Brazil)

2016-07-01

Increased air pollution intensified the search for materials that could convert pollutant gases into less harmful substances. Thus, mixed oxides with perovskite structure began to be developed for presenting important features for the automotive catalysis. In this study has been compared the chemical composition of the materials with Pr{sub (1-x)}Ca{sub x}CoO{sub 3} and Gd{sub (1-x)}Ca{sub x}CoO{sub 3} (x = 0.2) synthesized by the method gelatine. The samples were characterized by techniques: Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-Ray Diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray fluorescence (XRF) and subjected to the catalytic test in methane combustion reaction. The evaluation of the catalytic activity showed that gadolinium catalyst is more efficient compared with the praseodymium catalyst, although they have similar maximum conversion of methane at high temperature, during the catalytic test the material with gadolinium showed higher catalytic activity and stability. (author)

Surface modification of ZnAl{sub 1.9}Eu{sub 0.05}O{sub 4} aiming to obtaining ZnAl{sub 1.9}Eu{sub 0.05}O{sub 4}/SiO{sub 2} hybrid for use as a biosensor; Modificacao da superficie do ZnAl{sub 1.9}Eu{sub 0.05}O{sub 4} visando a obtencao do hibrido ZnAl{sub 1.9}Eu{sub 0.05}O{sub 4}/SiO{sub 2} para aplicacao como biossensor

Energy Technology Data Exchange (ETDEWEB)

Araujo, P.M.A.G.; Santos, P.T.A.; Costa, A.C.F.M., E-mail: pascally.guerra@gmail.com, E-mail: polyanaquimica@yahoo.com.br, E-mail: ana.costa@ufcg.edu.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Junior, S.A.; Viana, R. S., E-mail: salvesjr@ufpe.br, E-mail: rodrigosilva.viana@yahoo.com.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil)

2017-01-15

This study aimed to investigate the influence of surface modification of ZnAl{sub 1.9}Eu{sub 0.05}O{sub 4} nanoparticles for obtaining hybrid ZnAl{sub 1.9}Eu{sub 0.05}O{sub 4}/SiO{sub 2} for application as a biosensor. Initially ZnAl{sub 1.9}Eu{sub 0.05}O{sub 4} nanoparticles were synthesized by combustion reaction and, subsequently, their surfaces were modified with silane agent. The samples were characterized by X-ray diffraction, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and excitation and emission spectroscopy. The results showed formation of ZnAl{sub 2}O{sub 4} as the major phase. By SEM, hard agglomerates, irregularly shaped in the form of plaques, with the presence of few irregular and variables pores were observed. The surface modification was confirmed by FTIR through the silanol and siloxane groups. The excitation and emission spectra revealed the presence of a broadband of ZnAl{sub 2} O{sub 4} matrix, and fine and intense transitions from europium ion arising from doping of non-stoichiometric ZnAl{sub 2}O{sub 4} with the europium. From the results of emission and excitation, it was observed that the luminescence of ZnAl{sub 1.9}Eu{sub 0.05}O{sub 4}/SiO{sub 2} hybrid presented a small decrease in relation to the ZnAl{sub 1.9}Eu0.0{sub 5}O{sub 4} nanoparticles. This decrease was almost insignificant in relation to the benefits of silanization caused by the introduction of functional groups that promote combination of hybrid ZnAl{sub 1.9}Eu{sub 0.05}O{sub 4}/SiO{sub 2} with biomolecules, being this promising for application as a biosensor used in the biomedical field for the diagnosis and treatment of diseases. (author)

Standardization of the radioimmunoassay of 17{beta}-estradiol (E{sub 2}) plasmatic and his application to the study of secretion of E{sub 2} in normal women, during the menstrual cycle and after the infusion of the gonadotropin (LH/FSH/RH) release factor; Padronizacao do metodo de radioimunoensaio de 17{beta}-estradiol (E{sub 2}) plasmatico e sua aplicacao ao estudo da secrecao de E{sub 2} em mulheres normais, durante o ciclo menstrual e apos a infusao do fator liberador de gonadotrofinas (LH/FSH/RH)

Energy Technology Data Exchange (ETDEWEB)

Kiyan, Takeko Shimizu

1979-07-01

A radioimmunoassay method for measurement of plasma E{sub 2} was standardized utilizing a highly specific antisera against E{sub 2} [-6 (-0-carboxymethyl)-oxime] BSA without the need of previous chromatographic purification. The anti-E{sub 2} serum was highly specific, showing high affinity with affinity constants: K{sub 1}=1 .62x10{sup 12} M{sup -1} and K{sub 2} = 2.94x10{sup 11} M{sup -1}, calculated by Scatchard plot. The standard curve sensitivity was 2 pico grams. The method was specific and accurate, showing an intra-assay precision with a mean C.V. of 2.9%, with the inter-assay evaluation showing a mean C.V. of 5.0%. This method was employed to evaluate E{sub 2} secretion during the menstrual cycle in 6 normal females, as indicated below: Days: -14 to -10 (early follicular phase..64.68 pg/ml{+-}12.14; - 9 to - 1(late follicular phase).122.39 pg/ml {+-}33,54; Peak day 281.28 pg/ml {+-}66 ,59; + 1 to + 7(early luteal phase) 127.47 pg/ml {+-}24.88; + 8 to +14 (late luteal phase) 87.57 pg/ml{+-}37,56. The effect of the acute and prolonged infusion of LH/FSH-RH(synthetic hypothalamic LH and FSH releasing hormone) was evaluated in the follicular and luteal phase in some of the normal females. (author)

Preparation and electrical characterization of electrolytes obtained from solid solution (Zr{sub 0.84}Y{sub 0.16O1.90}) x (Ce{sub 0.80}Gd{sub 0.20}O{sub 1.90}){sub 1-x} for fuel cells application; Preparacao e caracterizacao eletrica de eletrolitos obtidos a partir da solucao solida (Zr{sub 0.84}Y{sub 0.16O1.90}) x (Ce{sub 0.80}Gd{sub 0.20}O{sub 1.90}){sub 1-x} para aplicacao em pilhas de combustivel

Energy Technology Data Exchange (ETDEWEB)

Tonelli, Bruno C.; Antunes, Fabio C.; Souza, Dulcina P.F. de, E-mail: fcaufscar@yahoo.com.b [Universidade Federal de Sao Carlos (LAPCEC/UFSCar), SP (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais. Lab. de Preparacao e Caracterizacao Eletrica em Ceramicas

2010-07-01

Oxide fuel cells based on yttria stabilized zirconia (YSZ) operates near 1000 deg C. This high temperature results in physical and chemical degradation of the device. Rare earths doped ceria (REC) based systems can operate at low temperatures due to higher ionic conductivity. However, at low oxygen partial pressure, doped ceria shows n-type electronic conductivity due to reduction of Ce{sup +4} to Ce{sup +3}. Trying to put together the zirconia and ceria advantage, YSZ-REC composites have been investigated. In this work, YSZ-GdDC powders mixtures were prepared and pellets were isostatically pressed. Pellets were sintered 1100-1500 deg C temperature range. Sintered pellets were characterized by density measurements, X-ray diffraction, impedance spectroscopy and scanning electron microscopy. The experimental procedure adopted in this work generated solid solutions instead of composite samples. Nevertheless, the composition containing {approx}76 vol.% of YSZ, in spite of the high porosity, showed electrical conductivity similar to pure YSZ. (author)

Programa de Pós-Graduação em Geologia - Teses Defendidas 1999 - Doutorado - Instituto de Geociências - Universidade Federal do Rio de Janeiro

Directory of Open Access Journals (Sweden)

1999-01-01

apresentam maior proporção modal de piroxênios. Grãos Programa de Pós-Graduação em Geologia Teses Defendidas - Doutorado 115 Anuário do Instituto de Geociências - UFRJ Volume 22 / 1999 de ortopiroxênio (hiperstênio exibem lamelas de clinopiroxênio (salita/augita e viceversa, e são parcialmente substituídos por anfibólio e biotita. Nas rochas intermediárias exsolução e substituição em piroxênios são ausentes. Os ortopiroxênios variam do hiperstênio ao ferrohiperstênio e salita é a composição do clinopiroxênio. Biotita é o mineral máfico mais abundante, seguindo em abundância os piroxênios nos litotipos básicos e intermediários, e única fase máfica nos tipos graníticos. Análises por microssonda mostram enriquecimento em FeO e empobrecimento em Mg na gradação dos primeiros litotipos. São biotitas ricas em TiO2 (2.23 a 5.63% em todos os tipos estudados. Anfibólio primário é restrito às rochas de composição intermediária. São mais freqüentes nos quartzo-dioritos e quartzo-monzodioritos, compondo os aglomerados máficos. O plagioclásio nos litotipos básicos varia de An40-60 (andesina/ labradorita e grada para An25-40 (oligoclásio/andesina nos quartzo-dioritos e quartzo- monzodioritos. São hipidiomórficos, na sua maioria tabulares, e localmente nos gabros tendem a uma orientação preferencial. O feldspato alcalino nas rochas em que ocorre é hipidiomórfico a xenomórfico, e apresenta pertitas em proporções variáveis. Constitui os megacristais do granito megaporfirítico. O quartzo é xenomórfico, amebóide, comumente apresentando extinção ondulante e, localmente, subgrãos. Ocorre subordinadamente em intercrescimentos com anfibólio e biotita, nas rochas básicas e intermediárias. Os minerais opacos mais freqüentes são ilmenita, magnetita e Timagnetita, e os minerais acessórios mais freqüentes são apatita e zircão. Temperaturas de cristalização foram estimadas utilizando-se pares de piroxênios, anfibólio e

Programa de Pós-Graduação em Geologia - Dissertações Defendidas 1999 - Mestrado - Instituto de Geociências - Universidade Federal do Rio de Janeiro

Directory of Open Access Journals (Sweden)

1999-01-01

é então conhecidas. Os taxa identificados são concordantes com a idéia vigente de que as condições climáticas, ambientais e ecológicas eram diferentes dos atualmente reinantes no nordeste brasileiro durante o Pleistoceno final sub-recente, quando prevalecia um ambiente semi-árido mais ameno. Nome: Francisco Crescêncio Júnior Orientador: Claudio Gerhiem Porto Título: Estudomorfológico e Químico dos Grãos de Ouro do Minério Oxidado da Mina de Roça Grande Ii, Mg Resumo: A partir do final da década de 70 e nos anos 80, graças ao aumento do preço do ouro, intensificaram-se as pesquisas relacionadas ao comportamento deste metal em ambientes supergênicos. Várias pesquisas se desenvolveram na Austrália, África e Brasil, voltadas, principalmente, para os depósitos supergênicos lateríticos, onde se verificou que o ouro pode sofrer remobilização, através de processos químicos e físicos. A área do presente estudo, Mina de Roça Grande II, situa-se no Quadrilátero Ferrífero, MG. O depósito encaixa-se nos metassedimentos químicos do Grupo Nova Lima. Tanto o estudo da morfologia dos grãos de ouro com auxílio de lupa binocular e microscópio eletrônico de varredura (MEV acoplado a um analisador de imagem quanto da composição química destes grãos com auxílio da microssonda eletrônica, visou elucidar a atuação de tais processos. Na zona oxidada da mina foram estudados os níveis de saprock e saprolito na formação ferrífera e no metachert, além de um nível de solo coluvionar. Estes horizontes caracterizam um perfil intempérico típico de regiões de altitudes elevadas e de natureza supergênica não-laterítica. O estudo da morfologia dos grãos de ouro revelou que os grãos do solo tendem a ser mais regulares, lisos e arredondados, demonstrando maior desgaste em relação aos grãos encontrados nos outros horizontes. O analisador de imagem, apesar de diferenciar grãos regulares e irregulares, confirmando as observações de lupa