WorldWideScience

Sample records for michigan timber industry

  1. Michigan timber industry: An assessment of timber product output and use, 1990. Forest Service resource bulletin

    International Nuclear Information System (INIS)

    Hackett, R.L.; Pilon, J.

    1993-01-01

    The bulletin discusses recent Michigan forest industry trends and reports the results of a detailed study of forest industry, industrial roundwood production, and associated primary mill wood and bark residue in Michigan in 1990. Such detailed information is necessary for intelligent planning and decisionmaking in wood procurement, forest resource management, and forest industry development. Likewise, researchers need current forest industry and industrial roundwood information for planning projects. All board foot data in the report have been converted to International 1/4 inch scale by applying a multiplier of 1.08 to all saw-log volume reported in Scribner Decimal C scale by sawmills, a multiplier of 1.04 to all veneer log volume reported in Scribner Decimal C scale by veneer mills, a multiplier of 1.38 to all saw-log volume reported in Doyle scale by sawmills, and a multiplier of 1.14 to all veneer log volume reported in Doyle scale by veneer mills

  2. Operability and location of Michigan's timber resource.

    Science.gov (United States)

    Mark H. Hansen; Jerold T. Hahn

    1987-01-01

    Operability is the ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site. Data collected during the 1980 Michigan statewide forest inventory were used to examine operability of the timber resource based on seven operability components.

  3. Industrialized timber structures.

    Science.gov (United States)

    1974-01-01

    It was recently learned that a number of innovations in structural timber components are available to the construction industry, but that they were largely unknown to bridge designers. The purpose of this study was to develop for the Department a fea...

  4. Timber resource of Michigan's Southern Lower Peninsula Unit, 1980.

    Science.gov (United States)

    Jerold T. Hahn

    1982-01-01

    The fourth inventory of the timber resource of Michigan's Southern Lower Peninsula Survey Unit shows a 12% decline in commercial forest area and a 26% gain in growing-stock volume between 1966 and 1980. Presented are highlights and statistics on area, volume, growth, mortality, removals, utilization, and biomass.

  5. Inventory analysis of the timber industry in Ghana

    NARCIS (Netherlands)

    Eshun, J.F.; Potting, J.; Leemans, R.

    2010-01-01

    Background, aim, and scope The timber sector, i.e., forestry and timber industry, plays an important role in the socioeconomic development of Ghana through timber products export. Timber production in this sector is associated with increasing environmental burdens in terms of use of materials and

  6. California’s forest products industry and timber harvest, 2006

    Science.gov (United States)

    Todd A. Morgan; Jason P. Brandt; Kathleen E. Songster; Charles E. Keegan; Glenn A. Christensen

    2012-01-01

    This report traces the flow of California’s 2006 timber harvest through the primary wood products industry (i.e., firms that process timber into manufactured products such as lumber, as well as facilities such as pulp mills and particleboard plants, which use the wood fiber or mill residue directly from timber processors) and provides a description of the structure,...

  7. Electric industry restructuring in Michigan

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    This Staff Report suggests a modified approach designed to significantly increase the ability of all customer classes to participate and share in the benefits of competition. The concepts discussed in this Report are designed to ensure that rates are not increased for any customers as a result of restructuring and, where possible, rates are reduced through the use of rate reduction bonds. The program outlined in this Report is designed to fulfill five objectives. First, it protects the interests of smaller customers, including low-income residential customers and senior citizens. Second, the program provides opportunities to strengthen Michigan's business community. Third, the program includes funding for employee retraining to assure that utility employees are not negatively impacted by restructuring. Fourth, the phase-in program provides the utilities with the opportunity to prepare for competition so that they remain Michigan-based companies. Fifth, the program is designed to foster competition upon a level playing field. The Commission has jurisdiction over all investor electric utilities and rural electric cooperatives in Michigan. Municipal electric utilities are not subject to Commission jurisdiction. Although this Report discusses details regarding Consumers Power and Detroit Edison, its concepts and principles are intended to apply to all jurisdictional electric utilities

  8. Alabama's timber industry - an assessment of timber product output and use, 1995

    Science.gov (United States)

    Tony G. Johnson; Jim R. Gober; J. Stephen Nix

    1998-01-01

    Output of Industrial Timber Products.Note: The reader must understand that certain terms, namely-retained, export, import, production, and receipts-have specialized meanings and relationships. unique to the Forest Inventory and Analysis Units across the country that deal with timber products output.In 1995, the combined...

  9. Alaska's timber harvest and forest products industry, 2005

    Science.gov (United States)

    Jeff M. Halbrook; Todd A. Morgan; Jason P. Brandt; Charles E. Keegan; Thale Dillon; Tara M. Barrett

    2009-01-01

    This report traces the flow of timber harvested in Alaska during calendar year 2005, describes the composition and operations of the state's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, and sales of primary wood products....

  10. Alaska’s timber harvest and forest products industry, 2011

    Science.gov (United States)

    Erik C. Berg; Charles B. Gale; Todd A. Morgan; Allen M. Brackley; Charles E. Keegan; Susan J. Alexander; Glenn A. Christensen; Chelsea P. McIver; Micah G. Scudder

    2014-01-01

    This report traces the flow of timber harvested in Alaska during calendar year 2011, describes the composition and operations of the state’s primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, export, sales of primary wood products,...

  11. IMPACTS OF TIMBER LEGALITY VERIFICATION SYSTEM IMPLEMENTATION ON THE SUSTAINABILITY OF TIMBER INDUSTRY AND PRIVATE FOREST

    Directory of Open Access Journals (Sweden)

    Elvida Yosefi Suryandari

    2017-04-01

    Full Text Available International market requires producers to proof the legality of their wood products to address the issues of illegal logging and illegal trade. Timber Legality Verification System (TLVS has been prepared by the Government of Indonesia that covering the upstream and downstream wood industries. This paper aims to evaluate gaps in the implementation of TLVS policy and its impact on the sustainability of timber industry. This study was using gap, descriptive and costs-structure analyzes. The study was conducted in three provinces, namely: DKI Jakarta, West Java and D.I. Yogyakarta. Research found that the effectiveness of the TLVS implementation was low due to relatively rapid policy changes. This situation became disincetive for investments in timber business. Private sector perceived that TLVS policy should be applied in the upstream of timber business. Hence, the industry and market in the downstream have not been fully support to this system. Furthermore, TLVS policy implementation was considered ineffective by timber industry as well as private forest managers, especially by micro industry and smallholder private forests. This situation threatened the sustainability of timber industry and private forests. Therefore, Institutions should be strengthened in order to improve the quality of human resources and the competitiveness of products.

  12. North Dakota timber industry: an assessment of timber product output and use, 2009

    Science.gov (United States)

    David E. Haugen; Robert A. Harsel

    2013-01-01

    Presents recent North Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  13. South Dakota timber industry: an assessment of timber product output and use, 2009

    Science.gov (United States)

    Ronald J. Piva; Gregory J. Josten

    2013-01-01

    Presents recent South Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  14. Montana's forest products industry and timber harvest, 2004

    Science.gov (United States)

    Timothy P. Spoelma; Todd A. Morgan; Thale Dillon; Alfred L. Chase; Charles E. Keegan; Larry T. DeBlander

    2008-01-01

    This report traces the flow of Montana's 2004 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Montana's primary forest products industry; and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production...

  15. Idaho's forest products industry and timber harvest, 2011

    Science.gov (United States)

    Eric A. Simmons; Steven W. Hayes; Todd A. Morgan; Charles E. Keegan; Chris Witt

    2014-01-01

    This report traces the flow of Idaho’s 2011 timber harvest through the primary industries; provides a description of the structure, capacity, and condition of Idaho’s industry; and quantifies volumes and uses of wood fiber. Historical wood products industry trends are discussed, as well as changes in harvest, production, employment, and sales.

  16. Wisconsin timber industry--an assessment of timber product output and use, 1988.

    Science.gov (United States)

    W. Brad Smith; James W. Whipple

    1990-01-01

    Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1988. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

  17. The Four Corners timber harvest and forest products industry, 2012

    Science.gov (United States)

    Colin B. Sorenson; Steven W. Hayes; Todd A. Morgan; Eric A. Simmons; Micah G. Scudder; Chelsea P. McIver; Mike T. Thompson

    2016-01-01

    This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2012, describes the composition and operations of the region’s primary forest products industry, and quantifies volumes and uses of wood fiber. Recent changes in the wood products industry are discussed, as well as trends...

  18. The Four Corners timber harvest and forest products industry, 2007

    Science.gov (United States)

    Steven W. Hayes; Todd A. Morgan; Erik C. Berg; Jean M. Daniels; Mike Thompson

    2012-01-01

    This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2007, describes the composition and operations of the region's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as...

  19. Procurement of timber for the Finnish forest industries

    International Nuclear Information System (INIS)

    Hakkila, P.

    1995-01-01

    The procurement of timber to the forest industries in the Nordic countries is based on the log-length or shortwood system, and employs load-carrying forwarders and chainsaw of single-grip harvesters. This technology is characterized by high productivity, safety, suitability for small-sized trees, high recovery of timber, and environmental friendliness. About one fourth of the industrial timber in the whole world is harvested using the log-length system. The challenge of ecological sustainability, multiple use of forests, adoption of thinnings as a tool of management, trend toward improved utilization of forest biomass, and shift from natural forests to plantations all increase the global interest in the log-length system. The paper presents a review of the Finnish forest sector, the technology of timber harvesting and transport, productivity of logging work, and costs of timber at the mill. The highly mechanized logging systems of the forest industries and the lighter technology of self-employed forest owners are discussed separately. Furthermore, the use of residual biomass as a source of clean and renewable energy, the Finnish logging machine industry, and forest operations research in Finland are also reviewed. (46 refs., 35 figs., 8 tabs.)

  20. The changing veneer and plywood industry of Michigan and Wisconsin.

    Science.gov (United States)

    Gary R. Lindell; Lewis T. Hendricks

    1972-01-01

    Analyzes trends in the hardwood veneer and plywood industry of Michigan and Wisconsin between 1964 and 1969. In that period, red oak and hard maple replaced yellow birch as the major species used. Log supplies were adequate. Wall paneling was the major end market with doorskins next. Excess plywood producing capacity is a chronic problem.

  1. Oregon’s forest products industry and timber harvest, 2008: industry trends and impacts of the Great Recession through 2010

    Science.gov (United States)

    Charles B. Gale; Charles E. Keegan; Erik C. Berg; Jean Daniels; Glenn A. Christensen; Colin B. Sorenson; Todd A. Morgan; Paul. Polzin

    2012-01-01

    This report traces the flow of Oregon’s 2008 timber harvest through the primary timber processing industry and provides a description of the structure, operation, and condition of Oregon’s forest products industry as a whole. It is the second in a series of reports that update the status of the industry every 5 years. Based on a census conducted in 2009 and 2010, we...

  2. Engineering evaluation of 55-year-old timber columns recycled from an industrial military building

    Science.gov (United States)

    Robert H. Falk; David Green; Douglas Rammer; Scott F. Lantz

    2000-01-01

    A large sample of timber was collected from a 548,000-ft.2 (50,900-m2) World War II era industrial military building containing approximately 1, 875,000 board feet (4,400 m3) of lumber and timber. Sixty 12-foot- (3.6-m-) long, nominal 8- by 8-inches (190-by 190-mm) Douglas-fir columns were tested at the USDA Forest Service, Forest Products Laboratory, and the results...

  3. Veneer industry and timber use, North Central Region, 1980.

    Science.gov (United States)

    James E. Blyth; W. Brad Smith

    1984-01-01

    Shows 1980 veneer-log production and receipts by species in the Lake State (Michigan, Minnesota, and Wisconsin) and in the Central States (Illinois, Indiana, Iowa, and Missouri). Comparisons are made with similar data collected in 1976. Includes tables showing veneer-log production and receipts (for selected years) since 1946 in the Lake States and since 1956 in the...

  4. Solar-assisted drying of timber at industrial scale: management paper

    African Journals Online (AJOL)

    While ambient air drying depends on the weather conditions, conventional hightemperature dryers cause high investments and energy costs. Up to now, solar dryers could not be established in industrial timber production, due to their insufficient drying capacity and the lack of an adequate control of the drying conditions.

  5. On the question of the necessity of implementation of automatic control systems in timber industry

    Science.gov (United States)

    Khasanov, E. R.; Zelenkov, P. V.; Petrosyan, M. O.; Murygin, A. V.; Laptenor, V. D.

    2016-04-01

    The paper considers the necessity of implementation of automatic control systems on the level of forest farms management and timber industry. Main areas of activity, which currently subjected to automation, are revealed. Objectives, which solved by implementation of APCS, are identified.

  6. Balancing Conservation and Economic Sustainability: The Future of the Amazon Timber Industry

    Science.gov (United States)

    Merry, Frank; Soares-Filho, Britaldo; Nepstad, Daniel; Amacher, Gregory; Rodrigues, Hermann

    2009-09-01

    Logging has been a much maligned feature of frontier development in the Amazon. Most discussions ignore the fact that logging can be part of a renewable, environmentally benign, and broadly equitable economic activity in these remote places. We estimate there to be some 4.5 ± 1.35 billion m3 of commercial timber volume in the Brazilian Amazon today, of which 1.2 billion m3 is currently profitable to harvest, with a total potential stumpage value of 15.4 billion. A successful forest sector in the Brazilian Amazon will integrate timber harvesting on private lands and on unprotected and unsettled government lands with timber concessions on public lands. If a legal, productive, timber industry can be established outside of protected areas, it will deliver environmental benefits in synergy with those provided by the region’s network of protected areas, the latter of which we estimate to have an opportunity cost from lost timber revenues of 2.3 billion over 30 years. Indeed, on all land accessible to harvesting, the timber industry could produce an average of more than 16 million m3 per year over a 30-year harvest cycle—entirely outside of current protected areas—providing 4.8 billion in returns to landowners and generating 1.8 billion in sawnwood sales tax revenue. This level of harvest could be profitably complemented with an additional 10% from logging concessions on National Forests. This advance, however, should be realized only through widespread adoption of reduced impact logging techniques.

  7. Missouri timber industry--an assessment of timber product output and use.

    Science.gov (United States)

    W. Brad. Smith; Shelby Jones

    1990-01-01

    Discusses recent Missouri forest industry trends; production and receipts of saw logs; and production of charcoal, veneer logs, cooperage logs, and other products in 1987. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this residue.

  8. Florida's timber industry-an assessment of timber product output and use, 2005

    Science.gov (United States)

    Tony G. Johnson; James W. Bentley; Michael Howell

    2008-01-01

    In 2005, volume of industrial roundwood output from Florida's forests totaled 445 million cubic feet, 13 percent less than in 2003. Mill byproducts generated from primary manufacturers declined to 146 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Pulpwood was the leading roundwood product at 214 million cubic feet;...

  9. Georgia's timber industry-an assessment of timber product output and use, 2005

    Science.gov (United States)

    Tony G. Johnson; Nathan McClure; John L. Wells

    2007-01-01

    In 2005, industrial roundwood output from Georgia's forests totaled 1.17 billion cubic feet, 1 percent more than in 2003. Mill byproducts generated from primary manufacturers increased 4 percent to 433 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Pulpwood was the leading roundwood product at 543 million cubic feet...

  10. North Carolina's timber industry-an assessment of timber product output and use, 2005

    Science.gov (United States)

    Tony G. Johnson; Michael C. Mann

    2007-01-01

    In 2005, industrial roundwood output from North Carolina's forests totaled 784 million cubic feet, 1 percent more than in 2003. Mill byproducts generated from primary manufacturers declined 3 percent to 306 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Saw logs were the leading roundwood product at 400 million cubic...

  11. Mississippi's timber industry - an assessment of timber product output and use, 2005

    Science.gov (United States)

    James W. Bentley; Michael Howell; Tony G. Johnson

    2008-01-01

    In 2005, industrial roundwood output from Mississippi's forests totaled 1.03 billion cubic feet, 11 percent more than in 2002. Mill byproducts generated from primary manufacturers decreased 1 percent to 385 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Saw logs were the leading roundwood product at 543 million cubic...

  12. The South's timber industry -- an assessment of timber product output and use, 2005

    Science.gov (United States)

    Tony G. Johnson; James W. Bentley; Michael Howell

    2008-01-01

    In 2005, industrial roundwood output from the South's forests totaled 8.7 billion cubic feet, 6 percent more than in 2003. Mill byproducts generated from primary manufacturers increased 1 percent to 3.2 billion cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Saw logs were the leading roundwood product at 3.9 billion cubic...

  13. Louisiana's timber industry - an assessment of timber product output and use, 2005

    Science.gov (United States)

    James W. Bentley; Michael Howell; Tony G. Johnson

    2008-01-01

    In 2005, industrial roundwood output from Louisiana's forests totaled 866 million cubic feet, 20 percent more than in 2002. Mill byproducts generated from primary manufacturers increased 17 percent to 321 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Saw logs were the leading roundwood product at 343 million cubic...

  14. South Carolina's timber industry-an assessment of timber product output and use, 2005

    Science.gov (United States)

    Tony G. Johnson; Nathan Smith

    2007-01-01

    In 2005, industrial roundwood output from South Carolina's forests totaled 645 million cubic feet, 13 percent more than in 2003. Mill byproducts generated from primary manufacturers increased 10 percent to 186 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Pulpwood was the leading roundwood product at 318 million...

  15. Condition Assessment of the Timber Structures of a Century-Old Industrial Building Using a Nondestructive Inspection Procedure

    Science.gov (United States)

    Xiping Wang; Marko Teder; James Wacker

    2013-01-01

    This paper reports an in situ inspection project conducted on heavy timber structures of a century-old industrial building at a paper manufacturing facility. A nondestructive inspection procedure was employed to evaluate the true condition of the heavy timbers that serve as the main framing structure of the building. The on-site investigation involved monitoring of the...

  16. Greek timber industries and wood product markets over the last century: development constraints and future directions

    Directory of Open Access Journals (Sweden)

    Panagiotis P. Koulelis

    2011-01-01

    Full Text Available This paper examines the Greek forestry sector after 1930. According to the past literature, the sector was entirely degraded and reliable data are not available. The study analyses critical historical data about timber sector and timber companies; the main objective is the specification of the factors that kept the Greek forest sector underdevelopment. The factors and the development constraints, including the indigenous characteristics of the Greek forests, the inhibitory policy for timber production investments, especially in the state industries, lack of market research, unorthodox procedures for sale of the wood, bad quality and high cost of production and periods of general economic recession are analyzed farther. Conclusively, the need for producing official forest maps, forest data recording, rapid adaptation to EU specifications, investments, deep changes in to the managership of the state industries, permanent and specialized personnel and promotion of national programs for the development of the small-scale wood elaboration and wood selling industrial units are some of the solutions for the above problems that could be suggested.

  17. Greek timber industries and wood product markets over the last century: development constraints and future directions

    Directory of Open Access Journals (Sweden)

    Panagiotis P. Koulelis

    2013-12-01

    Full Text Available This paper examines the Greek forestry sector after 1930. According to the past literature, the sector was entirely degraded and reliable data are not available. The study analyses critical historical data about timber sector and timber companies; the main objective is the specification of the factors that kept the Greek forest sector underdevelopment. The factors and the development constraints, including the indigenous characteristics of the Greek forests, the inhibitory policy for timber production investments, especially in the state industries, lack of market research, unorthodox procedures for sale of the wood, bad quality and high cost of production and periods of general economic recession are analyzed farther. Conclusively, the need for producing official forest maps, forest data recording, rapid adaptation to EU specifications, investments, deep changes in to the managership of the state industries, permanent and specialized personnel and promotion of national programs for the development of the small-scale wood elaboration and wood selling industrial units are some of the solutions for the above problems that could be suggested.

  18. Service to the Electric Utility Industry by the Ford Nuclear Reactor, University of Michigan

    International Nuclear Information System (INIS)

    Burn, R.R.; Simpson, P.A.; Cook, G.M.

    1993-01-01

    Since 1977, the staff of the University of Michigan's Ford Nuclear Reactor has been providing irradiation, testing, analytical, and training services to electric utilities and to suppliers of the nuclear electric utility industry. This paper discusses the reactor's irradiation facilities; reactor programs and utilization; materials testing programs; neutron activation analysis activities; and training programs conducted

  19. Thermophysical properties of composite fuel based on T grade coal (Alardinskoe deposit) and timber industry wastes

    Science.gov (United States)

    Yankovsky, S. A.; Tolokolnikov, A. A.; Gubin, V. E.; Slyusarskiy, K. V.; Zenkov, A. V.

    2017-09-01

    Results of experimental studies of composite fuel thermal decomposition processes based on T grade coal (Alardinskoe deposit) and timber industry wastes (fine wood) are presented. C, H, N, S weight percentage of each component of composite fuel was determined experimentally. It has been established that with an increase in wood concentration up to 50% in composite fuel, its energy characteristics decrease by less than 3.6%, while the yield of fly ash is 39.7%. An effective composite fuel composition has been defined as 50%/50%. Results of performed experimental studies suggest that it is possible to use composite fuels based on coal and wood at thermal power plants.

  20. Building Surface Science Capacity to Serve the Automobile Industry in Southeastern Michigan, final report

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Weidian

    2013-09-27

    This project, “Building Surface Science Capacity to Serve the Automobile Industry in Southeastern Michigan” was carried out in two phases: (1) the 2009 – 2012 renovation of space in the new EMU Science Complex, which included the Surface Science Laboratory (SSL), a very vigorous research lab at EMU that carries on a variety of research projects to serve the auto and other industries in Michigan; and (2) the 2013 purchase of several pieces of equipment to further enhance the research capability of the SSL. The funding granted by the DoE was proposed to “renovate the space in the Science Complex to include SSL and purchase equipment for tribological and electrochemical impedance measurements in the lab, thus SSL will serve the auto and other industries in Michigan better.” We believe we have fully accomplished the mission.

  1. Threshold responses of songbirds to long-term timber management on an active industrial forest

    Science.gov (United States)

    Becker, Douglas A.; Wood, Petra Bohall; Keyser, Patrick D.; Wigley, T. Bently; Dellinger, Rachel; Weakland, Cathy A.

    2011-01-01

    Forest managers often seek to balance economic benefits from timber harvesting with maintenance of habitat for wildlife, ecosystem function, and human uses. Most research on the relationship between avian abundance and active timber management has been short-term, lasting one to two years, creating the need to investigate long-term avian responses and to identify harvest thresholds when a small change in habitat results in a disproportionate response in relative abundance and nest success. Our objectives were to identify trends in relative abundance and nest success and to identify landscape-scale disturbance thresholds for avian species and habitat guilds in response to a variety of harvest treatments (clear-cuts, heavy and light partial harvests) over 14 years. We conducted point counts and monitored nests at an industrial forest in the central Appalachians of West Virginia during 1996–1998, 2001–2003, and 2007–2009. Early successional species increased in relative abundance across all three time periods, whereas interior-edge and forest-interior guilds peaked in relative abundance mid-study after which the forest-interior guild declined. Of 41 species with >10 detections, four (10%) declined significantly, 13 (32%) increased significantly (only three species among all periods), and 9 (22%) peaked in abundance mid-study (over the entire study period, four species had no significant change in abundance, four declined, and one increased). Based on piecewise linear models, forest-interior and interior-edge guilds’ relative abundance harvest thresholds were 28% total harvests (all harvests combined), 10% clear-cut harvests, and 18% light partial harvests, after which abundances declined. Harvest thresholds for the early successional guild were 42% total harvests, 11% clear-cut harvest, and 10% light partial harvests, and relative abundances increased after surpassing thresholds albeit at a reduced rate of increase after the clear-cut threshold. Threshold

  2. Global sustainable timber supply and demand

    Science.gov (United States)

    Peter J. Ince

    2010-01-01

    Industrial timber use has provided timber revenue that has helped make timber supply and demand more sustainable in the leading timber producing regions of the world. Sustainable development implies not consuming more resources today than we can replace tomorrow, but sustainable forest management implies more than merely a non-declining supply of timber. Forests as a...

  3. Soil Contamination as a Legacy of the U.S. Auto Industry, Southwest Detroit, Michigan USA

    Science.gov (United States)

    Murray, K.; Peterman, C.

    2012-04-01

    The Delray community of southwest Detroit is one of the most depressed areas in southeast Michigan. Historically, Delray was a working class, racially diverse community that depended heavily on industrial jobs provided by nearby factories. However, decades of industrial waste discharges have left Delray with extensive air and soil pollution. Although high unemployment and poverty are major challenges confronting residents in Delray today, the threat to public health from Pb, Hg, As and Cr [VI] in the soil may become an even bigger issue and a significant source of concern. Newspaper headlines cite crime, substance abuse, high school and labor force dropout, as being prevalent in Delray, but recent research suggest that soil contamination, which has resulted in elevated blood Pb levels may be an underlying factor. Recent interest in this area as a potential site for a new bridge to Canada, has offered new hope to the residents by potentially opening the door for redevelopment. The initial step in this process is an environmental assessment of the Delray community. This investigation is being conducted by the University of Michigan-Dearborn in consortium with local community groups and the Detroit Public School. Although preliminary, an analysis of soil samples from over 400 residences has indicated that significant levels of As, and Pb are present in the upper 0.1 meter of soil throughout the Delray area. The high levels of metals present in the soil suggest that further investigation and possible remedial action will be necessary prior to redevelopment.

  4. Timber industry waste-teak ( Tectona grandis Linn.) leaf extract mediated synthesis of antibacterial silver nanoparticles

    Science.gov (United States)

    Devadiga, Aishwarya; Shetty, K. Vidya; Saidutta, M. B.

    2015-08-01

    The current research article emphasizes efficacious use of teak leaves, an agro -biowaste from world's premier hardwood timber industry, for "green" synthesis of silver nanoparticles (AgNPs). Bioactive compounds of the leaves act as prolific reducing and stabilizing agents in AgNP synthesis. The characterization of the AgNPs synthesized using teak leaves revealed that the particles are spherical with an average size of 28 nm and the presence of bioactive compounds present in teak leaf extract as capping agents on the nanoparticles. A prominent decrease in the content of bioactive compounds such as polyphenols, antioxidants and flavonoids after the biosynthesis of AgNPs signifies that these class of compounds act as reductants and stabilizers during biosynthesis. The biosynthesized silver nanoparticles were also successfully evaluated for their antibacterial characteristics against waterborne pathogens, E. coli and S. aureus, with minimum inhibitory concentration of 25.6 μg/mL. Exploitation of agrowaste resources for synthesis of AgNPs curtails indiscriminate usage of food and commercial plant materials, rather contributing a sustainable way for effective plant waste biomass utilization and management. The biosynthesized AgNps have potential application in water purifiers, antibacterial fabrics, sports wear and in cosmetics as antibacterial agent and the process used for its synthesis being greener is highly beneficial from environmental, energy consumption and economic perspectives.

  5. Changes to timber market

    International Nuclear Information System (INIS)

    Haluza, I.

    2008-01-01

    Ten thousands of tree trunks have ended up in the Liptovska Mara lake. The fact that state owned company Lesy SR decided to store the timber in the reservoir as it could not sell it on the market represents a small revolution in the industry. About a year ago timber processing companies were fighting for timber and suddenly it cannot be sold and has to be stored in the reservoir waiting for better times. When the forestry and timber processing industry will not be in such a difficult situation as it is now. Timber, floor and furniture manufacturers claim that the demand for their products and consequently also prices are falling. Some have already started to decrease production and started making redundancies. And when manufacturers complain, the timber suppliers are not happy either. The reason is that the industry has been hit by several blows at the same time. In last three to four years forests in Slovakia, Czech Republic, Austria, Scandinavia and in Canada have suffered several heavy windstorms after which large volumes of timber had to be processed quickly. So there was an excess of timber, particularly spruce. This created an ideal situation for the processing industry where the more agile companies increased their market share and offered timber at more competitive prices. (authors)

  6. Michigan forest statistics, 1980.

    Science.gov (United States)

    Gerhard K. Raile; W. Brad Smith

    1983-01-01

    The fourth inventory of the timber resource of Michigan shows a 7% decline in commercial forest area and a 27% gain in growing-stock volume between 1966 and 1980. Highlights and statistics are presented on area, volume, growth, mortality, removals, utilization, and biomass.

  7. Preventing industrial pollution at its source: the final report of the Michigan source reduction initiative

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-09-01

    This report describes a collaborative effort between NRDC, Dow Chemical, and Michigan Environmental Groups. The effort resulted in the identification and implementation of 17 pollution prevention projects that reduced substantial quantities of wastes and emissions and saved Dow considerable money.

  8. Preventing industrial pollution at its source: the final report of the Michigan source reduction initiative; FINAL

    International Nuclear Information System (INIS)

    None

    1999-01-01

    This report describes a collaborative effort between NRDC, Dow Chemical, and Michigan Environmental Groups. The effort resulted in the identification and implementation of 17 pollution prevention projects that reduced substantial quantities of wastes and emissions and saved Dow considerable money

  9. Impact of European Union Timber Regulation on Forest Certification Strategies in the Finnish Wood Industry Value Chain

    Directory of Open Access Journals (Sweden)

    Jani Holopainen

    2015-08-01

    Full Text Available The aim of this explorative study is to find out how the EU Timber Regulation (EUTR has affected the forest and chain of custody (CoC certification strategies and practices among the Finnish wood industry companies. We are especially interested to find out whether more integrated strategies and collaborative networks have emerged for enhanced communications throughout the industry value chains. This qualitative interview study included both EUTR ex ante and ex post analysis, based on three rounds of managerial and expert interviews during 2011–2015. The results indicate that the EUTR appears to have enforced the supplier–client relations in the Finnish wood industry value chain. The sector still lacks integrated communication strategies with better understanding of customer and stakeholder values, which could contribute to more cohesive communication and marketing efforts reflecting the values of the whole industry. The certification practices are fairly spontaneously implemented following the traditional industry culture, which is not supportive of innovations and gaining competitive advantages in the broader material markets. Furthermore, the existence of two parallel forest certificates (Forest Stewardship Council (FSC and Programme for the Endorsement of Forest Certification (PEFC seems to hamper the effective communication and building of an image of sustainable wood products among customers and end consumers, groups that are also exposed to more general environmental communication, e.g., in the building material markets.

  10. Michigan's forests 2004

    Science.gov (United States)

    Scott A. Pugh; Mark H. Hansen; Lawrence D. Pedersen; Douglas C. Heym; Brett J. Butler; Susan J. Crocker; Dacia Meneguzzo; Charles H. Perry; David E. Haugen; Christopher Woodall; Ed Jepsen

    2009-01-01

    The first annual inventory of Michigan's forests, completed in 2004, covers more than 19.3 million acres of forest land. The data in this report are based on visits to 10,355 forested plots from 2000 to 2004. In addition to detailed information on forest attributes, this report includes data on forest health, biomass, land-use change, and timber-product outputs....

  11. Curved Folded Plate Timber Structures

    OpenAIRE

    Buri, Hans Ulrich; Stotz, Ivo; Weinand, Yves

    2011-01-01

    This work investigates the development of a Curved Origami Prototype made with timber panels. In the last fifteen years the timber industry has developed new, large size, timber panels. Composition and dimensions of these panels and the possibility of milling them with Computer Numerical Controlled machines shows great potential for folded plate structures. To generate the form of these structures we were inspired by Origami, the Japanese art of paper folding. Common paper tessellations are c...

  12. Achievements of the ITB's--Furniture and Timber Industry Training Board

    Science.gov (United States)

    Industrial Training International, 1974

    1974-01-01

    The Furniture and Industry Training Board set out in 1965 to find a means of successfully implementing management training in small firms. The author describes research efforts undertaken by the Board which led to the development of the training program now in use--management development based on company appraisal. (AJ)

  13. Timber Curtain

    DEFF Research Database (Denmark)

    2015-01-01

    Timber Curtain is a site specific architectural installation, which is part of a research project conducted at the Aarhus School of Architecture as collaboration between Ph.D. and associate professor Niels Martin Larsen and the author. Through a digitally scripted associative model we performed s...... of pinewood timber, machined with a CMS Antares 5-axis CNC router. The digital process generation and simulation was implemented with Rhinoceros 3D, Grasshopper and GHPython, and AlphaCAM was used for preparing the CNC-routing....

  14. Timber tracking

    DEFF Research Database (Denmark)

    Düdder, Boris; Ross, Omry

    2017-01-01

    Managing and verifying forest products in a value chain is often reliant on easily manipulated document or digital tracking methods - Chain of Custody Systems. We aim to create a new means of tracking timber by developing a tamper proof digital system based on Blockchain technology. Blockchain...

  15. Participatory approach used to develop a sustainability assessment tool for wood-based bioenergy industry in upper Michigan, USA

    Science.gov (United States)

    Vaidya, Ashma; Mayer, Audrey

    2015-04-01

    Biofuel production has grown significantly in the past few decades as a result of global concern over energy security, climate change implications and unsustainable attributes of fossil fuels. Currently, biofuels produced from food crops (such as corn, sugarcane, soy, etc.) constitute the bulk of global biofuel production. However, purported adverse impacts of direct and indirect land-use changes (such as increased food prices, competition for agricultural land and water, and carbon emissions from land-use change) resulting from large-scale expansion of the crop-based biofuel industry have motivated many nations to further shift their attention to second-generation (non crop-based) biofuel production. Current R&D on second-generation biofuel production is largely focused on exploring prospects of using abandoned/fallow land for growing feedstock (such as Jatropha, short rotation woody coppice, Willow/Poplar species, Micanthus etc.), and on producing fuel that is cost-effective and compatible with existing infrastructures. The bulk of existing research on second-generation biofuel production concentrates on enhancing its technical feasibility and compatibility with existing infrastructure; very few have attempted to qualitatively determine and understand stakeholders' concerns and perception regarding this emergent industry. Stakeholders' decisions regarding land and resource use will play a crucial role in ensuring the social sustainability of any industry. Our research is focused on understanding stakeholders' concerns and perceptions regarding biofuel production in the upper Michigan region, where wood-based bioenergy development is being planned and researched by businesses, government agencies, and the local university. Over a century ago, the region's economy was dependent upon mining and clear-cut logging industries, which left the area once the resources were depleted. Since that time, the region has lost significant population due to the lack of economic

  16. Energy reserch in the mechanical forest industry 1980-1982. Energy consumption in the manufacture of joinery products, wooden houses and in the further processing of sawn timber

    Energy Technology Data Exchange (ETDEWEB)

    Tarvainen, V.; Froeblom, J.

    1983-03-01

    Energy consumption in the mechanical forest industry in 1979 was studied by sending questionnairies to all the significant factories Information was requested on power and heat consumption and installed power in separate process phases. For background information, some aspects of the production process were also requested. The factories which answered the inquiry produced about one half of the doors and windows manufactured in 1979, one sixth of the finger jointed timber and about one third of other products in the branch. The total energy consumption in the branch was 1 556 TJ, 77% was heat. The share of the joinery industry (doors, windows and fixtures) in the total was 2/3, of which 86% was heat energy. The energy needed in the wooden house industry was 219 TJ, in planing works 137 TJ, in the gluelam industry 86 TJ, in finger jointing 76 TJ and in the production of roof trusses about 6 TJ. The investigated brances accounted for 7% of the energy consumption of the whole mechanical forest industry. The energy consumption in producing products of the same type in different factories varied very much. The differences were partially structural. However, there is considerable room for energy savings in many of the factories.

  17. Recommendations for sustainable development of non-timber forest products

    Science.gov (United States)

    Gina H. Mohammed

    2001-01-01

    Non-timber forest products--or NTFPs--are considered here to be botanical products harvested or originating from forest-based species, but excluding primary timber products, industrial boards and composites, and paper products. A recent study of non-timber forest products in Ontario, Canada, identified at least 50 types of NTFPs and hundreds of specific products used...

  18. Rent-seeking and timber rights allocation in Ghana

    DEFF Research Database (Denmark)

    Carlsen, Kirsten; Hansen, Christian Pilegaard

    2014-01-01

    This paper describes types, processes and importance of rent-seeking in the allocation of timber rights in Ghana. It is based on an analysis of 30 interviews with large-, medium- and small-scale timber firms, as well as government officials and timber industry organizations in Ghana. The paper...... documents that timber rights allocation is associated with both bureaucratic and political corruption. The latter comes in two forms. First, the findings suggest that well-established relationships exist between politicians and senior bureaucrats on the one side and large-scale timber firms on the other...

  19. Damping in Timber Structures

    OpenAIRE

    Labonnote, Nathalie

    2012-01-01

    Key point to development of environmentally friendly timber structures, appropriate to urban ways of living, is the development of high-rise timber buildings. Comfort properties are nowadays one of the main limitations to tall timber buildings, and an enhanced knowledge on damping phenomena is therefore required, as well as improved prediction models for damping. The aim of this work has consequently been to estimate various damping quantities in timber structures. In particular, models h...

  20. CONTEMPORARY SLOVENIAN TIMBER ARCHITECTURE INTERNATIONAL RECOGNIZED

    Directory of Open Access Journals (Sweden)

    Manja Kitek Kuzman

    2014-12-01

    Full Text Available The book presents Slovenia' s contemporary timber architecture. Thanks to its abundant forests, Slovenia has preserved the tradition of wood construction. As much as 60% of its surface is covered by forests. Slovenia is also the third most forested country in Europe. The high share of forest-covered surface allows for a sustainable production of high-quality wood. In the past, wood was used primarily in the construction of farm buildings, but now timber architecture is used for everything from residences and office buildings to public buildings such as community centres and schools. Timber construction is becoming increasingly popular. Apart from larger companies taking this approach, a great number of wooden houses have sprung up, built either on personal initiative or with the support of carpenter workshops. Slovenian timber architecture has taken a new approach to environmental and energy-efficiency problems and received great international recognition. The book discusses over fifty projects built over a ten-year period, and includes descriptions, photographs, and plans. The projects include residential areas, administration, and office, as well as tourist, educational, and industrial buildings. Timber architecture is presented as an integral part of the Slovenian landscape. The monograph will be useful to designers and future experts in their planning of optimal timber buildings and will highlight the main benefits of using timber construction.

  1. Economic impacts of wine tourism in Michigan

    Science.gov (United States)

    Mi-Kyung Kim; Seung Hyun Kim

    2003-01-01

    In Michigan, wine tourism is perceived as increasingly important concept because more and more tourists visit wineries and wine tasting rooms annually. However there have been few studies conducted concerning the economic impacts of wineries in Michigan even though the industry has been recognized as having significant economic impact potential. The primary purpose of...

  2. Section of mechanized timbering

    Energy Technology Data Exchange (ETDEWEB)

    Balaganskiy, S Ye; Aksanov, Sh I; Ardashev, K A; Mednik, L Ye; Mikhaylov, P G

    1980-09-05

    A section of mechanized timbering is claimed which contains a base, roof timber, hydraulic stand, hydraulic packing cylinders, packing telescopic shield hinged to the roof timber by means of guides. To improve the reliability of forming the filling massif, the packing telescopic shield is made in the form of individual telescopic beams with guards which are interconnected by means of cross beams, while the gaps between the telescopic beams are covered with elasic plates.

  3. Long term contracts signed in Slovak timber business

    International Nuclear Information System (INIS)

    Haluza, I.

    2005-01-01

    The Slovak timber business is changing. The state-owned company, SR Forests, which cuts more then 50% of Slovak timber has signed long term agreements with major domestic timber processing companies - Smrecina, the Rettenmeier Tatra Timber saw mill in Liptovsky Mikulas and two paper mills - Mondi SCP Ruzomberok and Kappa Sturovo. In the past, only quarterly contracts were signed. Now, for the first time, two-year contracts have been signed that should help the timber processing industry and the forestry sector. The General Director of Lesy SR (SR Forests), Karol Vins, hopes for better sale prices. Company headquarters wants to maintain better control of prices than under the old system of timber sales by its branches. In the opinion of the General Director of the Forestry Section at the Ministry of Agriculture, long term contracts will guarantee a stable delivery of timber to processing companies, giving investors in new production capacity a better position in negotiations with banks regarding financing. According to K. Vins, long term contracts have so far only been negotiated with major timber processing companies which are mostly controlled by foreign capital and therefore have good payment discipline. The Association of the Timber Processing Industry is unhappy regarding developments and Lesy SR has not invited domestic companies to these negotiations

  4. Timber salvage economics

    Science.gov (United States)

    Jeffrey P. Prestemon; Thomas P. Holmes

    2008-01-01

    Timber salvage is commonly done following natural disturbances, to recover some value from damaged forests. Decision making about salvage, however, is affected by ownership objectives, the nature of the damage agent, site factors, and the strength of the local timber market. For profit-maximizing landowners, salvage decisions must balance the cost of harvesting...

  5. timber for structural use

    African Journals Online (AJOL)

    HOD

    Logs of Apa timber were air-dried and along the stem, 324 pieces of test specimens were ..... (machine) manual with the load rate of 1mm/min ..... [16] Desch, H. E., Timber properties, 6th. Edition,. Revised by J. M. Dinwoodie. Macmillan ...

  6. 1970 Oregon timber harvest.

    Science.gov (United States)

    Brian R. Wall

    1971-01-01

    The 1970 Oregon timber harvest of 7.98 billion board feet was the lowest recorded since the recession year of 1961 when 7.41 billion board feet of timber was produced. The 1970 log production figure was 12.8 percent below the 1969 harvest, the second consecutive year of declining production in Oregon.

  7. Traditional timber frames

    NARCIS (Netherlands)

    Jorissen, A.J.M.; Hamer, den J.; Leijten, A.J.M.; Salenikovich, A.

    2014-01-01

    Due to new possibilities traditional timber framing has become increasingly popular since the beginning of the 21e century. Although traditional timber framing has been used for centuries, the expected mechanical behaviour is not dealt with in great detail in building codes, guidelines or text

  8. Forest owners' timber sales satisfaction

    International Nuclear Information System (INIS)

    Pammo, R.; Ripatti, P.

    2003-01-01

    The TTS Institute has carried out a study concerning forest owners' timber sales. The material was collected in 2002 via a mail inquiry that targeted forest owners who sold timber during the years 1997-1999 and 1999-2002. Three quarters of the forest owners sold timber to the same timber buying company during both periods of 1997-1999 and 1999-2002. The most important reasons for selling to the same buyer were that they purchased all timber assortments, reliability and good timber price. Mainly the same reasons also applied when changing the timber buying company. The most sensitive groups to changing timber buyer were 60-69 year old, entrepreneurs, men, and owners of forest holdings between 20-29 hectares, owners of inherited forests and joint forest ownerships. The forest owners assessed the timber buying company's operations and its staff on the basis of the last timber sale. The forest owners gave best values for the timber buyer's reliability, the purchase of all timber assortments and the timber buyers' reputation. The worst values were given for cross-cutting and response to complaints. No less than 95 percent of forest owners were prepared to recommend their timber trade partner to acquaintances, friends or other forest owners. Yet only half of the forest owners recognized that their last timber sale experience would not affect which company will be selected for the nest timber sale process

  9. Timber Products Supply and Demand

    Science.gov (United States)

    Jeffrey P. Prestemon; Robert C. Abt

    2002-01-01

    This chapter describes historical, current, and projected timber inventories and timber product outputs from southern forests. It also attempts to place these quantities in national and international perspectives. Timber is the most valuable commercial commodity taken from most forests, and its removal strongly influences the character of those forests. Timber is...

  10. Timber in Bridge Structures

    OpenAIRE

    Detkin, Viktoria

    2016-01-01

    The purpose of this final year project was to study the properties of timber as a structural material and the suitability of wood in load bearing members for bridge structures. For a case study, an existing timber bridge was selected. Due to its condition the bridge should be replaced. The design of a new bridge with steel beams holding a glulam deck was made. During the case study the replacement of steel beams by glulam timber ones was discussed. Some calculations were made in order to ...

  11. Tree-mendous Timber Evaluation

    Science.gov (United States)

    2004-01-01

    Funded and administered by NASA, the Affiliated Research Center (ARC) program transfers geospatial technologies from the Space Agency and participating universities to commercial companies, non-profit and trade organizations, and tribal governments. The origins of the ARC program date back to 1988, when NASA's Stennis Space Center initiated the Visiting Investigator Program to bring industry closer to spatial information technologies. The success of this trial program led to an expansion into the ARC program, whose goal is to enhance competitiveness of U.S. industries through more efficient use of remote sensing and related technologies. NASA's ARC program served as the foundation for the development of International Hardwood Resources, which then grew into Falcon Informatics with the acquisition of a technology from a European software company and a change of business models. Doylestown, Pennsylvania-based Falcon Informatics is now a world-leading information services company that combines in-depth timber industry experience with state-of-the-art software to serve the needs of national governments, international paper companies, and timber-investment management organizations.

  12. Value of timber continues to increase

    International Nuclear Information System (INIS)

    Haluza, I.

    2007-01-01

    The state owned company, Lesy SR (state forests) enjoys great power in the timber industry. It can influence which timber processing companies in Slovakia will be successful and which will not have easy access to the raw material. It manages half of the forests in Slovakia. It is the only seller of timber in this country. Four years ago, the former cabinet appointed banker, Karol Vins, as the director of the company. And he started making changes. He centralized the timber business and thousands of people left the company. The goal was clear -to increase quality and efficiency. The economic performance of the company improved. The company has finally managed to post a profit. Last year, the government changed and so has the director of the company The former banker was replaced by a new head from a forestry research background, Jozef Mindas. He approves of some of the changes introduced by his predecessor and plans to continue implementing them, although there also those he would like to change. The new manager is not concerned regarding the big change from research where he used to work in the past to director of a big company and rejects the allegation that he was nominated by HZDS. I was approached as an expert and I won a tender. I have never been a member of a political party, he stated. He appreciates that his predecessor managed to revitalize the company, which was assisted by the positive effect of out-sourcing. But on the other hand, during transformation forests were not divided up correctly. The division into units did not always take into account the specific requirements of forestry, i.e. some employees in forest units have too much work and some, working in another forest unit, less. We have to make sure that the workload is approximately at the same level everywhere. He is aware of the fact that Lesy SR, which controls two thirds of the timber market, effectively decides which factory will succeed and which one will not. But he adds that Lesy SR do

  13. Architectural and structural qualities in timber joints

    DEFF Research Database (Denmark)

    Christensen, Jesper Thøger; Christensen, Mogens Fiil; Damkilde, Lars

    2016-01-01

    Design of joints in timber structures is crucial to reach both elegant and structural efficient designs. Design of joints should therefore be an integral part of the conceptual design phase. Traditionally this is not the case, and joints are often solely designed and analysed in the engineering...... but also increase timbers competitiveness in the building industry. The paper is part of an ongoing research project aiming at providing tools for an integrated design process for timber structures. The focus of the paper is to identify how structure and its joints contributes to architecture and vice...... design phase. The result is joints that function structurally but do not add value to the design, and may even compromise the architectural ideas. With an approach, integrating both structural and architectural design from the beginning, one should not only gain better structures and architecture...

  14. Timber resources of southwest Oregon.

    Science.gov (United States)

    Patricia M. Bassett

    1979-01-01

    This report presents statistics from a 1973 inventory of timber resources of Douglas County and from a 1974 inventory of timber resources of Coos, Curry, Jackson, and Josephine Counties, Oregon. Tables presented are of forest area and of timber volume, growth, and mortality.

  15. Timber frame walls

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Brandt, Erik

    2010-01-01

    A ventilated cavity is usually considered good practice for removing moisture behind the cladding of timber framed walls. Timber frame walls with no cavity are a logical alternative as they are slimmer and less expensive to produce and besides the risk of a two-sided fire behind the cladding....... It was found that the specific damages made to the vapour barrier as part of the test did not have any provable effect on the moisture content. In general elements with an intact vapour barrier did not show a critical moisture content at the wind barrier after four years of exposure....

  16. Design of timber groynes

    NARCIS (Netherlands)

    Perdok, U.; Crossman, M.; Verhagen, H.J.; Howard, S.; Simm, J.

    2003-01-01

    The performance and durability of timber groynes (or 'groins') is highly dependent on the design and detailing of the structure. Using knowledge and experience developed over generations an effective functional design can be achieved, which may ultimately result in lower whole life costs and provide

  17. Growing Timber Structures

    DEFF Research Database (Denmark)

    Tamke, Martin; Evers, Henrik Leander; Stasiuk, David

    2013-01-01

    The contemporary design of timber structures has to answer questions concerning structural stability, production impact and energy implications in ever earlier stages. The interrelation of these levels creates a complexity that is difficult to resolve through contemporary linear parametric...... to integrate the behaviour of networked systems into structures made from wooden material....

  18. Modern Timber Harvesting Practices Have Little Short-Term Effect on Soil Carbon Stores in Industrial Forests of Western Oregon and Washington, U.S.A.

    Science.gov (United States)

    Holub, S. M.; Hatten, J. A.

    2017-12-01

    Soil carbon represents a large, but slowly changing pool of carbon in forests and understanding its response to forest management, including harvesting, is critical for determining overall stand/landscape carbon balance. Past studies have observed mixed effects of harvesting on soil carbon possibly due, in part, to imprecise sampling methods and high variability within soils. Weyerhaeuser Company has led a major effort to examine the effect of conventional timber harvesting on long-term soil carbon stores in western Oregon and Washington Douglas-fir forests using a highly-replicated longitudinal study design that enables precise estimation of variability found in these systems. In 2010, we randomly selected nine harvest units from Weyerhaeuser's 2012 harvest plan. At each non-harvested unit, a uniform, non-rocky area of about 3-6 hectares was selected for the study. Pre-harvest soil samples were collected at 300 sample points from each unit on a fixed square grid, targeting an intensity that would allow detection of >5% change in soil carbon stores. We measured soil carbon concentration and soil bulk density in depth increments to 1 m to allow for the calculation of total soil carbon per hectare. Other ecosystem pools of carbon, such as trees and downed wood, also have been measured to complete the whole-site carbon budget. All units were harvested from late 2011 through mid-year 2012. In 2015, 3-3.5 years post-harvest, we resampled the same areas in an identical manner as the pre-harvest collection to evaluate changes in soil carbon following harvest. Across all sites combined, we estimated a +2% change (-2% to +6%, 95% confidence interval) in mineral soil carbon following harvest, which is consistent with small-to-no change. Individual sites varied in direction of response; only one site showed evidence of a slight decrease in soil carbon, while two sites showed slight gains. These early results indicate that Weyerhaeuser's conventional timber harvesting methods

  19. Some background of monitoring and NDT also useful for timber structures

    OpenAIRE

    Kurz, Jochen Horst; Boller, Christian

    2015-01-01

    Extension of the life of existing and historic timber structures has increased steadily in the last decade. Sustainability and low carbon emission have influenced activities in the construction industry. In the frame of the European COST Action FP 1101, several activities related to timber structures have been clustered. The COST Action FP 1101 consists of three working groups, namely Assessment (Working Group 1), Reinforcement (Working Group 2) and Monitoring (Working Group 3) of Timber Stru...

  20. The Level of Utilization of Secondary Timber Species among Furniture Producers

    OpenAIRE

    Antwi-Boasiako, Charles; Boadu, Kwadwo Boakye

    2016-01-01

    Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS) that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and ...

  1. The 1993 RPA timber assessment update

    Science.gov (United States)

    Richard W. Haynes; Darius M. Adams; John R. Mills

    1995-01-01

    This update reports changes in the Nation's timber resource since the 1989 RPA timber assessment. The timber resource situation is analyzed to provide projections for future cost and availability of timber products to meet demands. Prospective trends in demands for and supplies of timber, and the factors that affect these trends are examined. These include changes...

  2. Market Barriers to Solar in Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Miller, E.; Nobler, E.; Wolf, C.; Doris, E.

    2012-08-01

    The solar industry in the United States is at a turning point; the cost of PV hardware has declined substantially in recent years, placing new attention on reducing the balance of system (BOS) costs of solar that now contribute to a growing percentage of installation expenses. How states address these costs through the creation of a favorable policy and regulatory environment is proving to be a critical determinant of a thriving statewide solar market. This report addresses the permitting and tax issues that may stimulate the solar market growth in Michigan. By making PV installations easier to complete through reduced BOS costs, Michigan would become a more attractive location for manufacturers and installers. As PV module costs decline and BOS costs make up a greater share of the cost of solar, action taken today on these issues will prove beneficial in the long term, providing Michigan an opportunity to establish a leadership position in the solar industry.

  3. State forest timber sales in 2006

    International Nuclear Information System (INIS)

    Office National des Forets

    2007-01-01

    For the first time since the 1999 storms, forest owners have experienced a favourable market. The combination of buoyant demand for both industrial round-wood and timber and consolidation of supply led to a significant increase in prices. With a logging volume of 15 million m 3 (standing timber equivalent), state forest timber supply has remained at a high level, slightly above that of 1999. The improved business cycle situation has pushed prices up, including for beech for which rates had stagnated for some time. However, in spite of the 15% rise compared to 2005, the average per cubic metre price sold by the ONF (31.20 euros), all categories of timber and all state forests taken together, remains well below the average for the 1996-1999 period (37.80 euros). While unsold stocks have fallen considerably, the ONF has sought to facilitate access to products by industry by modernising its sales methods in line with the new 2005 legislative and regulatory provisions. Greater flexibility in the rules applicable to privately negotiated spot sales and supply contracts should over time contribute to stabilizing and reducing the accessory costs of supply. The changes implemented over the last decade in favour of private sales, which now account for nearly 40% of volumes sold, should continue in the future. Of those volumes, 20% were sold under supply contracts, a proportion that is rising sharply. These contracts covered more than one million m 3 in 2006, encouraging the ONF to adopt a new sales scheme and establish structures for consultations with both forest municipalities and the downstream component of the industry. (authors)

  4. Timber resources of Ohio

    Science.gov (United States)

    Neal P. Kingsley; Carl E. Mayer

    1970-01-01

    Under the authority of the McSweeney-McNary Forest Research Act of May 22, 1928, and subsequent amendments, the Forest Service, U. S. Department of Agriculture, conducts a series of continuing forest surveys of all states to provide up-to-date information about the forest resources of the Nation. A resurvey of the timber resources of Ohio was made in 1966 and 1967 by...

  5. Historic timber roof structures

    OpenAIRE

    Magina, Miguel Jorge

    2013-01-01

    Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Estruturas e Geotecnia This dissertation covers the study of historic timber roof structures in Transylvania area - Romania, the structures type, its elements and connection variety between them. Procedures to study a structure of this category are approached. It is also referred semi and non-destructive tests that can be done to better understand the present wood characteristics, and potential reparation or strengthening...

  6. Supply and demand of timber for wood turning in Maine

    Science.gov (United States)

    Eric H. Wharton; Robert L., Jr. Nevel; Douglas S. Powell; Douglas S. Powell

    1987-01-01

    An analytical report on the volume of wood used by the wood-turning industry in Maine, and the volume of timber from the state's timberlands that may be suitable for turnstock. Findings are based on the third forest resource survey of Maine timberlands, and an industry canvass of primary manufacturing mills using wood from Maine timberlands, both conducted in 1982...

  7. Logging firms, nonindustrial private forests, and forest parcelization: evidence of firm specialization and its impact on sustainable timber supply

    Science.gov (United States)

    Mark Rickenbach; Thomas W. Steele

    2006-01-01

    Increasing forest parcelization has raised concerns about tract-size economies and sustainable timber supply. We explored this issue by examining the logging sector and forest ownership in northern Wisconsin and Michigan's Upper Peninsula. Using 2004 survey data, we found that 48% of logging firms demonstrated a near exclusive reliance on nonindustrial private...

  8. Monitoring of timber structures: Editorial

    OpenAIRE

    Kurz, Jochen Horst

    2015-01-01

    Timber structures have been in use for centuries, with proven durability. In recent years, timber has become particularly important, due to its standing as a truly renewable material for construction and carbon storage purposes. The material behaviour of wood is known and understood. The current design concepts for timber structures are also well developed. Nevertheless, the underlying processes of the ageing and deterioration of wood are complex, and the anisotropic structure of wood require...

  9. Timber management planning with timber ram and goal programming

    Science.gov (United States)

    Richard C. Field

    1978-01-01

    By using goal programming to enhance the linear programming of Timber RAM, multiple decision criteria were incorporated in the timber management planning of a National Forest in the southeastern United States. Combining linear and goal programming capitalizes on the advantages of the two techniques and produces operationally feasible solutions. This enhancement may...

  10. Cut and Run: Illegal Logging and Timber Trade in the Tropics | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Illegal logging and trade in timber is a major cause of forest degradation in the world ... But controlling this global problem is not a simple matter of enacting new laws ... practices in the logging industry and timber trade of four tropical countries.

  11. Bathymetry of Lake Michigan

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Bathymetry of Lake Michigan has been compiled as a component of a NOAA project to rescue Great Lakes lake floor geological and geophysical data and make it more...

  12. The Level of Utilization of Secondary Timber Species among Furniture Producers

    Directory of Open Access Journals (Sweden)

    Charles Antwi-Boasiako

    2016-06-01

    Full Text Available Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and Methods: Data were collected from 300 Timber Firms from Ghana primarily through questionnaires using the stratified random sampling technique. Results: Continuous decline and non-availability of preferred traditional timbers and competition from imported furniture were the main challenges confronting the furniture industry. Data obtained indicated that most manufacturers (85% hardly use any LUS; 44% of these mentioned lack of information on their properties and prospective uses and 32% attributed it to non-availability on the domestic timber markets. However, 22% of these producers rely on traditionally ‘well-known’ timbers (e.g. mixed red wood, Guarea cedrata and Tectona grandis owing to their strength properties, 20% due to their strength and durability and 14% because of their strength and aesthetic properties. Many LUS (with prospects for furniture-making available in great quantities in many tropical forests could substitute the over-dependent timbers. However, information on their properties and uses are hardly available to local producers, which affects their popularity among timber suppliers and manufacturers. Conclusion: To improve on the level of utilization of secondary timbers, wood workers must be supplied with comprehensive information about their properties and economic values. This will contribute to reducing pressure on the primary timbers, ensuring consistent supply of timber and keeping the sector operational.

  13. The impact of an urban-industrial region on the magnitude and variability of persistent organic pollutant deposition to Lake Michigan.

    Science.gov (United States)

    Hornbuckle, Keri C; Green, Mark L

    2003-09-01

    A predictive model for gas-phase PCBs and trans-nonachlor over Lake Michigan has been constructed and the resulting data examined for trends. In this paper, we describe the model results to show how the magnitude and variability of a plume of contaminants from the Chicago area contributes to a highly variable region of net contaminant deposition over the entire lake. For the whole lake, gross annual deposition of PCBs is approximately 3200 kg, although the net annual gas exchange is not significantly different from zero. The data-driven model illustrates that on a daily basis, the net exchange of persistent organic pollutants (POPs) can change from net deposition to net volatilization depending on the area of plume impact. These findings suggest that i) control of urban areas can accelerate the rate of volatilization from lakes; and ii) release of POPs from urban areas is largely a result of volatilization processes.

  14. Timber floors strengthened with concrete

    NARCIS (Netherlands)

    Blass, H.J.; Linden, M.L.R. van der; Schlager, M.

    1998-01-01

    Timber-concrete composite (tcc) beams may be used for the renovation of old timber floors. Although these systems are not new (Pokulka, 1997) and form a simple and practical solution, they are not widely adopted. One of the reasons for this is the Jack of uniform design rules. In this research

  15. Timber designers' manual

    CERN Document Server

    Ozelton, E C

    2008-01-01

    This major reference manual covers both overall and detail design of structural timber, including aspects such as shear deflection, creep, dynamic and lateral stability considerations for flexural members.Available for the first time in paperback, the Third Edition was substantially revised to take account of the many changes since the previous edition was published in 1984. It is based on British Standard BS 5268-2: 2002, which brought design concepts closer to European practice and Eurocode 5.Features of the Third Edition include:* information on bolt values including

  16. Computer Vision for Timber Harvesting

    DEFF Research Database (Denmark)

    Dahl, Anders Lindbjerg

    The goal of this thesis is to investigate computer vision methods for timber harvesting operations. The background for developing computer vision for timber harvesting is to document origin of timber and to collect qualitative and quantitative parameters concerning the timber for efficient harvest...... segments. The purpose of image segmentation is to make the basis for more advanced computer vision methods like object recognition and classification. Our second method concerns image classification and we present a method where we classify small timber samples to tree species based on Active Appearance...... to the development of the logTracker system the described methods have a general applicability making them useful for many other computer vision problems....

  17. Probabilistic modeling of timber structures

    DEFF Research Database (Denmark)

    Köhler, Jochen; Sørensen, John Dalsgaard; Faber, Michael Havbro

    2007-01-01

    The present paper contains a proposal for the probabilistic modeling of timber material properties. It is produced in the context of the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS) [Joint Committee of Structural Safety. Probabilistic Model Code, Internet...... Publication: www.jcss.ethz.ch; 2001] and of the COST action E24 ‘Reliability of Timber Structures' [COST Action E 24, Reliability of timber structures. Several meetings and Publications, Internet Publication: http://www.km.fgg.uni-lj.si/coste24/coste24.htm; 2005]. The present proposal is based on discussions...... and comments from participants of the COST E24 action and the members of the JCSS. The paper contains a description of the basic reference properties for timber strength parameters and ultimate limit state equations for timber components. The recommended probabilistic model for these basic properties...

  18. Field performance of timber bridges. 9, Big Erick`s stress-laminated deck bridge

    Science.gov (United States)

    J. A. Kainz; J. P. Wacker; M. Nelson

    The Big Erickas bridge was constructed during September 1992 in Baraga County, Michigan. The bridge is 72 ft long, 16 ft wide, and consists of three simple spans: two stress-laminated deck approach spans and a stress-laminated box center span. The bridge is unique in that it is one of the first known stress-laminated timber bridge applications to use Eastern Hemlock...

  19. Field performance of timber bridges. 4, Graves Crossing stress-laminated deck bridge

    Science.gov (United States)

    J. P. Wacker; M. A. Ritter

    The Graves Crossing bridge was constructed October 1991 in Antrim County, Michigan, as part of the demonstration timber bridge program sponsored by the USDA Forest Service. The bridge is a two-span continuous, stress-laminated deck superstructure and it is 36-ft long and 26-ft wide. The bridge is one of the first stress-laminated deck bridges to be built of sawn lumber...

  20. The impact of ultraviolet radiation on timber

    International Nuclear Information System (INIS)

    Dawson, B.

    1993-01-01

    Photochemical degradation of timber, the outcome of exposure of timber to ultraviolet radiation, is a light induced chemical and physical decay. Timber is a collection of dead wood cells. Impacts of radiation on the growing tree are therefore outside the scope of this paper, which is primarily concerned with timber as a material. (author). 5 refs. 2 figs

  1. Probabilistic Modeling of Timber Structures

    DEFF Research Database (Denmark)

    Köhler, J.D.; Sørensen, John Dalsgaard; Faber, Michael Havbro

    2005-01-01

    The present paper contains a proposal for the probabilistic modeling of timber material properties. It is produced in the context of the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS) and of the COST action E24 'Reliability of Timber Structures'. The present...... proposal is based on discussions and comments from participants of the COST E24 action and the members of the JCSS. The paper contains a description of the basic reference properties for timber strength parameters and ultimate limit state equations for components and connections. The recommended...

  2. Robustness Evaluation of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; čizmar, D.

    2010-01-01

    The present paper outlines results from working group 3 (WG3) in the EU COST Action E55 – ‘Modelling of the performance of timber structures’. The objectives of the project are related to the three main research activities: the identification and modelling of relevant load and environmental...... exposure scenarios, the improvement of knowledge concerning the behaviour of timber structural elements and the development of a generic framework for the assessment of the life-cycle vulnerability and robustness of timber structures....

  3. Empirical yield tables for Michigan.

    Science.gov (United States)

    Jerold T. Hahn; Joan M. Stelman

    1984-01-01

    Describes the tables derived from the 1980 Forest Survey of Michigan and presents ways the tables can be used. These tables are broken down according to Michigan's four Forest Survey Units, 14 forest types, and 5 site-index classes.

  4. Hinged roof timber

    Energy Technology Data Exchange (ETDEWEB)

    Shestov, P I; Golub, A G; Yefremov, V I

    1980-08-07

    A hinged roof timer is suggested which includes a beam with prong and loop on the end which have openings in the form of ring slits for the distance wedges and round for the pins. In this case the opening of the distance wedge in the ring is arranged in relation to the opening for the pin closer to the end of the beam, and in the prong, in the opposite order. In order to improve the operating quality by guaranteeing active support of the cantilever roof timber without increasing its overall dimensions for the height of the opening for the distance wedge in the prong and the ring, beams are arranged axisymmetrically to the longitudinal axis.

  5. The privately owned timber resources of western Oregon.

    Science.gov (United States)

    Donald R. Gedney

    1983-01-01

    Timber resource statistics from a 1973-76 inventory are presented for private timberland in western Oregon. Inventories usually classify private owners as either forest industry or nonindustrial private. For this report, however, the nonindustrial private classification has been further disaggregated into farmer, individual, and corporate owners. For all private owner...

  6. an assessment of timber trees producing valuable fruits and seeds ...

    African Journals Online (AJOL)

    User

    It is observed that most of the timber trees producing valuable fruits and seeds have low ... sector of the economy by providing major raw materials (saw logs, ... the trees also produce industrial raw materials like latex, ... villagers while avoiding some of the ecological costs of ..... enzymes of rats with carbon tetrachloride.

  7. 36 CFR 223.187 - Determinations of unprocessed timber.

    Science.gov (United States)

    2010-07-01

    ... generally recognized by the industry as setting a selling standard; and, (ii) A statement by the... setting a selling standard. (3) Lumber, construction timbers, or cants for remanufacture, except western... or better, with a maximum cross section of 2,000 square centimeters (310 square inches) for any...

  8. Grip for sawing round timber

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    This paper describes a device development at Gedling Colliery, Nottinghamshire Area, United Kingdom. It is a gripping attachment, designed to overcome the safety hazards involved in cross cutting timbers with a circular saw.

  9. Modelling the potential consequences of future worldwide biomass energy demand for the french forests and timber

    International Nuclear Information System (INIS)

    Buongiorno, Joseph; Raunikar, Ronald; Zhu, Shushuai

    2011-01-01

    This article describes an investigation conducted, using a world model for the forestry and forest-based industries, on the effects of the current unpredictable changes in worldwide demand for biomass energy on this sector in France. Two contrasting scenarios are tested. The results are commented and the potential conflict between various would uses - workable timber, industrial timber and dendro-energy - is underscored. (authors)

  10. FRP reinforcement of timber structures

    OpenAIRE

    Schober, Kay-Uwe; Harte, Annette M.; Kliger, Robert; Jockwer, Robert; Xu, Qingfeng; Chen, Jian-Fei

    2015-01-01

    Timber engineering has advanced over recent decades to offer an alternative to traditional materials and methods. The bonding of fibre reinforced plastics (FRP) with adhesives to timber structures for repair and strengthening has many advantages. However, the lack of established design rules has strongly restrained the use of FRP strengthening in many situations, where these could be a preferable option to most traditional techniques. A significant body of research has been carried out in rec...

  11. Notes on Michigan Boletaceae

    NARCIS (Netherlands)

    Smith, Alexander H.

    1973-01-01

    Studies have continued on the diversity of the Michigan bolete flora. During the season of 1972 a variety of Boletus affinis Peck having a reticulate stipe was discovered and abundant material of Boletus bicolor var. subreticulatus Smith & Thiers was obtained. Boletus hortonii Smith & Thiers was

  12. characterisation and grading of two selected timber species grown

    African Journals Online (AJOL)

    HOD

    Structural timber is the timber used in framing and load bearing ... The main challenge in design with timber as structural member is to .... is the classification of timber based on particular ..... Azadirachta indica leaf extract on serum lipid profile.

  13. Adhesives in Building--Lamination of Structural Timber Beams, Bonding of Cementitious Materials, Bonding of Gypsum Drywall Construction. Proceedings of a Conference of the Building Research Institute, Division of Engineering and Industrial Research (Spring 1960).

    Science.gov (United States)

    National Academy of Sciences - National Research Council, Washington, DC.

    The role of adhesives in building design is discussed. Three major areas are as follows--(1) lamination of structural timber beams, (2) bonding of cementitious materials, and (3) bonding of gypsum drywall construction. Topical coverage includes--(1) structural lamination today, (2) adhesives in use today, (3) new adhesives needed, (4) production…

  14. Successful and unsuccessful attempts to resolve caribou management and timber harvesting issues in west central Alberta

    Directory of Open Access Journals (Sweden)

    David Hervieux

    1996-01-01

    Full Text Available Research studies of woodland caribou in west central Alberta began in 1979 in response to proposed timber harvesting on their winter ranges. Using results from initial studies, timber harvest guidelines were developed. A recent review of these guidelines, and the assumptions on which they were based, has resulted in a renegotiation by government and industry of timber harvesting on caribou range in west central Alberta. Caribou range in west central Alberta overlaps many jurisdictional boundaries: federal and provincial lands, four Forest Management Agreement Areas, three Alberta Land and Forest Service Regions and two Alberta Fish and Wildlife Service Regions. This jurisdictional complexity in combination with other factors such as total allocation of the timber resources, high levels of petroleum, natural gas and coal extraction activities, a high level of concern by public groups for caribou conservation and recent understanding of woodland caribou needs for abundant space has made resolution of caribou/timber harvest conflicts exceedingly slow and often relatively unproductive. This paper reviews 10 years of trying to resolve conflicts between timber harvesting and caribou conservation through meetings, committees, integrated resource planning, policy papers and public consultation. We describe what might be learned by other jurisdictions that are trying to resolve similar caribou/timber harvesting issues. We conclude with an overview of recent timber harvest planning initiatives on caribou range in west central Alberta.

  15. OCP TECD Report - TARDEC Blast Mitigation Program (BMP) and National Defense Industrial Association (NDIA) Michigan (MI) Chapter Cooperative Research and Development Agreement (CRADA) Summary

    Science.gov (United States)

    2017-09-26

    Standard, MIL-STD-3058, Occupant-Centric Protection for Military Ground Vehicles. 15. SUBJECT TERMS Occupant Centric Platform Technology-Enabled...Capability Demonstration (OCP TECD), Occupant-centric, Occupant Protection , Underbody Blast, National Defense Industrial Association (NDIA...Cooperative Research and Development Agreement (CRADA) 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a. NAME OF

  16. Timber resource statistics for southwest Washington.

    Science.gov (United States)

    Patricia M. Bassett; Daniel D. Oswald

    1981-01-01

    This report summarizes a 1978 timber-resource inventory of six counties in southwest Washington: Clark, Cowlitz, Lewis, Pacific, Skamania, and Wahkiakum. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  17. Timber resource statistics for eastern Washington.

    Science.gov (United States)

    Patricia M. Bassett; Daniel D. Oswald

    1983-01-01

    This report summarizes a 1980 timber resource inventory of the 16 forested counties in Washington east of the crest of the Cascade Range. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  18. The timber resources of Rhode Island

    Science.gov (United States)

    Roland H. Ferguson; John R. McGuire; John R. McGuire

    1957-01-01

    This is a report on the first comprehensive survey ever made of the timber resources of Rhode Island. It shows, for the years 1952 and 1953, the area and condition of the forest land, the volume and quality of standing timber, the rates of timber growth and mortality, and the extent of timber cutting for forest products. The survey was made by the Forest Service as...

  19. Michigan's Forests 2009

    Science.gov (United States)

    Scott A. Pugh; Lawrence D. Pedersen; Douglas C. Heym; Ronald J. Piva; Christopher W. Woodall; Charles J. Barnett; Cassandra M. Kurtz; W. Keith. Moser

    2012-01-01

    The seventh inventory of Michigan's forests, completed in 2009, describes more than 19.9 million acres of forest land. The data in this report are based on visits to 7,516 forested plots from 2005 to 2009. Timberland accounts for 97 percent of this forest land, and 62 percent is privately owned. The sugar maple/beech/yellow birch forest type accounts for 18...

  20. Collapse Analysis of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2008-01-01

    of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall...... to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obtained. Therefore the structure can be considered......A probabilistic based collapse analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...

  1. Whiting in Lake Michigan

    Science.gov (United States)

    2002-01-01

    Satellites provide a view from space of changes on the Earth's surface. This series of images from the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) aboard the Orbview-2 satellite shows the dramatic change in the color of Lake Michigan during the summer. The bright color that appears in late summer is probably caused by calcium carbonate-chalk-in the water. Lake Michigan always has a lot of calcium carbonate in it because the floor of the lake is limestone. During most of the year the calcium carbonate remains dissolved in the cold water, but at the end of summer the lake warms up, lowering the solubility of calcium carbonate. As a result, the calcium carbonate precipitates out of the water, forming clouds of very small solid particles that appear as bright swirls from above. The phenomenon is appropriately called a whiting event. A similar event occured in 1999, but appears to have started later and subsided earlier. It is also possible that a bloom of the algae Microcystis is responsible for the color change, but unlikely because of Lake Michigan's depth and size. Microcystis blooms have occured in other lakes in the region, however. On the shore of the lake it is possible to see the cities of Chicago, Illinois, and Milwaukee, Wisconsin. Both appear as clusters of gray-brown pixels. Image courtesy the SeaWiFS Project, NASA/Goddard Space Flight Center, and ORBIMAGE

  2. The 2005 RPA timber assessment update.

    Science.gov (United States)

    Richard W. Haynes; Darius M. Adams; Ralph J. Alig; Peter J. Ince; John R. Mills; Xiaoping. Zhou

    2007-01-01

    This update reports changes in the Nation's timber resource since the Analysis of the Timber Situation in the United States was completed in 2003. Prospective trends in demands for and supplies of timber, and the factors that affect these trends are examined. These trends include changes in the U.S. economy, increased salvage of British Columbia beetle-killed...

  3. Control of borens in mine timbers

    Energy Technology Data Exchange (ETDEWEB)

    Yule, R A; Kennedy, M J

    1978-07-01

    The authors studied timber attack in Queensland mines by auger beetles and powder post beetles. When infested timber is taken into a mine the insects thrive at the temperatures (20 to 25 C) and relative humidities (70-90%) they encounter. Seven timber treatments were tested, and all were satisfactory except spraying with wood-preserving oil which contained a moderately effective insecticide.

  4. General notes on ductility in timber structures

    NARCIS (Netherlands)

    Jorissen, A.J.M.; Fragiacomo, M.

    2011-01-01

    The paper discusses the implications of ductility in design of timber structures under static and dynamic loading including earthquakes. Timber is a material inherently brittle in bending and in tension, unless reinforced adequately. However connections between timber members can exhibit significant

  5. Timber resource statistics for eastern Washington, 1995.

    Science.gov (United States)

    Neil McKay; Patricia M. Bassett; Colin D. MacLean

    1995-01-01

    This report summarizes a 1990-91 timber resource inventory of Washington east of the crest of the Cascade Range. The inventory was conducted on all private and public lands except National Forests. Timber resource statistics from National Forest inventories also are presented. Detailed tables provide estimates of forest area, timber volume, growth, mortality, and...

  6. Evaluation of recycled timber members

    Science.gov (United States)

    Douglas R. Rammer

    1999-01-01

    An experimental study was conducted to evaluate the residual shear capacity of large Douglas-fir timbers used in a military facility in Ardeen Hills, MN. A S-point and 4-point bending test was used to determine the effects of checks and splits on the shear strength capacity. Experimental results are compared to past shear and flexural studies.

  7. Timber management opportunities in Pennsylvania

    Science.gov (United States)

    Henry H. Webster

    1960-01-01

    The Pennsylvania Department of Forests and Waters serves the people in managing state forest lands and in helping private owners manage their forest lands. To produce more timber from Pennsylvania forests, the Department applies many different forestry practices. But the more effort it spends in one direction, the less it can spend in others. So the Department must...

  8. Timber resource statistics for Oregon.

    Science.gov (United States)

    Sally Campbell; Paul Dunham; David. Azuma

    2004-01-01

    This report is a summary of timber resource statistics for all ownerships in Oregon. Data were collected as part of several statewide multiresource inventories, including those conducted by the Pacific Northwest Region (Region 6) on National Forest System lands in Oregon, by the Bureau of Land Management (BLM) on BLM lands in western Oregon, and by the Pacific...

  9. Understanding Loss Deductions for Timber

    Science.gov (United States)

    John Greene; Michael Jacobson

    1998-01-01

    Forestland owners whose timber has been destroyed may be eligible to take a deduction for the loss on their federal income tax. The loss must be physical in nature and caused by an identifiable event or combination of events that has run its course. There are two types of losses from natural events. Casualty losses are sudden, unexpected, and unusual - as from a fire...

  10. Michigan E85 Infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, Matthew M.

    2012-03-30

    This is the final report for a grant-funded project to financially assist and otherwise provide support to projects that increase E85 infrastructure in Michigan at retail fueling locations. Over the two-year project timeframe, nine E85 and/or flex-fuel pumps were installed around the State of Michigan at locations currently lacking E85 infrastructure. A total of five stations installed the nine pumps, all providing cost share toward the project. By using cost sharing by station partners, the $200,000 provided by the Department of Energy facilitated a total project worth $746,332.85. This project was completed over a two-year timetable (eight quarters). The first quarter of the project focused on project outreach to station owners about the incentive on the installation and/or conversion of E85 compatible fueling equipment including fueling pumps, tanks, and all necessary electrical and plumbing connections. Utilizing Clean Energy Coalition (CEC) extensive knowledge of gasoline/ethanol infrastructure throughout Michigan, CEC strategically placed these pumps in locations to strengthen the broad availability of E85 in Michigan. During the first and second quarters, CEC staff approved projects for funding and secured contracts with station owners; the second through eighth quarters were spent working with fueling station owners to complete projects; the third through eighth quarters included time spent promoting projects; and beginning in the second quarter and running for the duration of the project was spent performing project reporting and evaluation to the US DOE. A total of 9 pumps were installed (four in Elkton, two in Sebewaing, one in East Lansing, one in Howell, and one in Whitmore Lake). At these combined station locations, a total of 192,445 gallons of E85, 10,786 gallons of E50, and 19,159 gallons of E30 were sold in all reporting quarters for 2011. Overall, the project has successfully displaced 162,611 gallons (2,663 barrels) of petroleum, and reduced

  11. MICHIGAN: Cyclotron conference

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    A sense of excitement was in the air as cyclotron physicists and engineers from 17 countries convened on 30 April for the opening of the Tenth International Conference on Cyclotrons and Their Applications. Some 50 years after its invention, the redoubtable cyclotron remains a topic of compelling current interest. Cyclotron experts gathered at Michigan State University's Kellogg Center to hear of latest developments, of progress and successes on new machines which had come into operation, of new projects which were underway, and of dreams which lay ahead

  12. MICHIGAN: Cyclotron conference

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1984-10-15

    A sense of excitement was in the air as cyclotron physicists and engineers from 17 countries convened on 30 April for the opening of the Tenth International Conference on Cyclotrons and Their Applications. Some 50 years after its invention, the redoubtable cyclotron remains a topic of compelling current interest. Cyclotron experts gathered at Michigan State University's Kellogg Center to hear of latest developments, of progress and successes on new machines which had come into operation, of new projects which were underway, and of dreams which lay ahead.

  13. 75 FR 41895 - Inteva Products, LLC Adrian, Michigan; Inteva Products, LLC Troy, Michigan; Amended Certification...

    Science.gov (United States)

    2010-07-19

    ... Products, LLC Adrian, Michigan; Inteva Products, LLC Troy, Michigan; Amended Certification Regarding... time period at the Troy, Michigan location of Inteva Products, LLC. The Troy, Michigan location.... Accordingly, the Department is amending the certification to include workers of the Troy, Michigan location of...

  14. Timber value—a matter of choice: a study of how end use assumptions affect timber values.

    Science.gov (United States)

    John H. Beuter

    1971-01-01

    The relationship between estimated timber values and actual timber prices is discussed. Timber values are related to how, where, and when the timber is used. An analysis demonstrates the relative values of a typical Douglas-fir stand under assumptions about timber use.

  15. System Reliability of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2010-01-01

    elements, alternate load path(s) etc. in the structural design. In general these characteristics can have a positive influence on system reliability of a structure however, in Eurocodes ductility is only awarded for concrete and steel structures but not for timber structures. It is well......-know that structural systems can redistribute internal forces due to ductility of a connection, i.e. some additional loads can be carried by the structure. The same effect is also possible for reinforced concrete structures and structures of steel. However, for timber structures codes do not award that ductility......For reduction of the risk of collapse in the event of loss of structural element(s), a structural engineer may take necessary steps to design a collapse-resistant structure that is insensitive to accidental circumstances e.g. by incorporating characteristics like redundancy, ties, ductility, key...

  16. Robustness Analyses of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Hald, Frederik

    2013-01-01

    The robustness of structural systems has obtained a renewed interest arising from a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures, many mo...... with respect to robustness of timber structures and will discuss the consequences of such robustness issues related to the future development of timber structures.......The robustness of structural systems has obtained a renewed interest arising from a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures, many...... modern building codes consider the need for the robustness of structures and provide strategies and methods to obtain robustness. Therefore, a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper summaries issues...

  17. Implementing CITES regulations for timber.

    Science.gov (United States)

    Blundell, Arthur G

    2007-03-01

    Foresters are currently confronted with a new challenge. For the first time a commonly traded timber species has been listed on the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES). At the 12th Conference of the Parties in November 2002, countries voted 68 to 30 to place the premier timber species of Latin America, big-leaf mahogany (Swietenia macrophylla King [Meliaceae]), on CITES Appendix II. Under Appendix II regulations, trade in mahogany requires that exporting countries verify that each shipment was legally obtained and that its harvest was non-detrimental to the survival of the species. Unfortunately, implementation has been weak, in part because countries have yet to develop a common, pragmatic, cost-effective system to make the legal and non-detriment findings. This paper recommends what such a system might include.

  18. Forests, timber and rural livelihoods

    DEFF Research Database (Denmark)

    Hansen, Christian Pilegaard; Pouliot, Mariève; Marfo, Emmanuel

    2015-01-01

    Based on detailed income data of 478 rural households, the nexus between forest, trees and rural livelihoods in Ghana is investigated and applied to assess implications of the Voluntary Partnership Agreement (VPA) between the EU and Ghana on illegal logging. It is found that, after crops...... and benefits to trees on farm and fallow land to those occupying and cultivating the land. Such efforts would provide incentive for timber production and thus enhance rural livelihoods, while combatting illegal logging, deforestation and forest degradation....

  19. Final Report on an Analysis of the Education and Training Systems at Milan, Michigan and Terre Haute, Indiana to Federal Prison Industries Incorporated, U.S. Department of Justice.

    Science.gov (United States)

    Hitt, William D.; And Others

    Existing education and training (E&T) programs at the Terre Haute Penitentiary, Indiana, and the Milan Federal Correctional Institution, Michigan, were described and evaluated. Needs, objectives, inmate classification and placement, staff, and other aspects were covered. Reports, staff and inmate interviews, study of instructional materials, and…

  20. Selection of Nepalese Timber for Small Wind Turbine Blade Construction

    DEFF Research Database (Denmark)

    Sinha, R.; Acharya, Parash; Freere, Peter

    2010-01-01

    , weathering effect on coatings, price, growth and availability of the timber. Mechanical properties such as Young's modulus of elasticity, breaking strength, breaking strain and Brinell's hardness of selected Nepalese timbers are presented. The effects of weathering on timbers without coating...

  1. Timber products output and timber harvests in Alaska: projections for 1992-2010.

    Science.gov (United States)

    D.J. Brooks; R.W. Haynes

    1994-01-01

    Projections of Alaska timber products output, the derived demand for raw material, and timber harvest by owner are developed from a trend-based analysis. By using a spread-sheet model, material flows in the Alaska forest sectorare fully accounted for. Demand for Alaska national forest timber is projected and depends on product output and harvest by other owners. Key...

  2. The Timber Resource Inventory Model (TRIM): a projection model for timber supply and policy analysis.

    Science.gov (United States)

    P.L. Tedder; R.N. La Mont; J.C. Kincaid

    1987-01-01

    TRIM (Timber Resource Inventory Model) is a yield table projection system developed for timber supply projections and policy analysis. TRIM simulates timber growth, inventories, management and area changes, and removals over the projection period. Programs in the TRIM system, card-by-card descriptions of required inputs, table formats, and sample results are presented...

  3. Sustainability and Security: Timber Certification in Asia-Pacific Region

    Directory of Open Access Journals (Sweden)

    Antonina Ivanova

    2008-10-01

    Full Text Available The expansion of sustainable development initiatives since the 1990’s reflected an emphasis on integrated solutions to economic development, socio-political stability and environmental health in the global community. In the same context the traditional concept of security needed to be open in two directions. First, the notion of security should no longer be applied only to the military realm, but also to the economic, the societal, the environmental, and the political fields. Second, the referent object of the “security” should not be conceptualized solely in terms of the state, but should embrace the individual below the state, and the international system above it. The forests industry timber certification in Asia-Pacific region has been selected as a case study because it is an excellent example to illustrate the links between the sustainable development and the environmental security, including also certain elements of economic security. This article is presenting a critical overview of the forest industry and the status of timber certification globally, with an emphasis on Asia – Pacific countries applying the Systemic Thinking approach. In conclusion, an outlook is presented concerning the future of timber certification and possible impacts on security and sustainable development.

  4. Local timber firm looking forward to develop on medium term

    Directory of Open Access Journals (Sweden)

    BUCS Lorant

    2017-01-01

    Full Text Available This article intends to outline the challenges faced by a local timber company in struggle to resist on medium-term on the market. There will be revealed the challenges the company is facing, and also the ways to adapt to the changing world of timber industry. There will be presented a short history of the founding and the evolution of the company on the local and international market, pointing out the relevant events which have marked the life of the company during the years. There will also be presented a short review of the competition on the market and the marketing strategy and policies which the company is using to be able to face the new challenges.

  5. Operability and location of Wisconsin's timber resource.

    Science.gov (United States)

    Jerold T. Hahn; Mark H. Hansen

    1989-01-01

    Data collected during the 1983 Wisconsin Statewide forest inventory were used to examine operability of the timber resource based on seven operability components. Operability is the ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site.

  6. Timber resource of Missouri's Prairie, 1972.

    Science.gov (United States)

    Jerold T. Hahn; Alexander Vasilevsky

    1975-01-01

    The third timber inventory of Missouri's Prairie Forest Survey Unit shows substantial declines in both growing-stock and sawtimber volumes between 1959 and 1972. Commercial forest area declined by one-fifth. Presents highlights and statistics on forest area and timber volume, growth, mortality, ownership, and use in 1972.

  7. Timber price dynamics following a natural catastrophe

    Science.gov (United States)

    Jeffrey P. Prestemon; Thomas P. Holmes

    2000-01-01

    Catastrophic shocks to existing stocks of a renewable resource can cause long-run price shifts. With timber, these long-run price shifts may be accompanied by a short-run price drop due to salvage. Hurricane Hugo damaged 20 percent of southern pine timber in the South Carolina Coastal Plain in 1989. To estimate the...

  8. Tall timber building technologies in The Netherlands

    NARCIS (Netherlands)

    Jorissen, A.J.M.; Leijten, A.J.M.

    2008-01-01

    In the last few decades, structural timber for residential buildings has lost popularity because of problems related to floor vibrations, acoustics and fire resistance. In recent years, however, solutions to these problems have been developed and timber-framed housing is becoming increasingly

  9. Timber-concrete composite floor systems

    NARCIS (Netherlands)

    Linden, M.L.R. van der; Blass, H.J.

    1996-01-01

    Timber-concrete composite (tcc) beams may be used for the renovation of old timber floors. Although these systems are a simple and practical solution, they are not widely adopted. One of the reasons for this is the lack of uniform design mies. In this research programme shear tests on four different

  10. Optimal control of raw timber production processes

    Science.gov (United States)

    Ivan Kolenka

    1978-01-01

    This paper demonstrates the possibility of optimal planning and control of timber harvesting activ-ities with mathematical optimization models. The separate phases of timber harvesting are represented by coordinated models which can be used to select the optimal decision for the execution of any given phase. The models form a system whose components are connected and...

  11. Timber resource statistics for western Washington.

    Science.gov (United States)

    Coffin D. MacLean; Patricia M. Bassett; Glenn. Yeary

    1992-01-01

    This report summarizes a 1988-90 timber resource inventory of 19 counties in western Washington: Clallam, Clark, Cowlitz, Grays Harbor, Island, Jefferson, King, Kitsap, Lewis, Mason, Pacific, Pierce, San Juan, Skagit, Skamania, Snohomish, Thurston, Wahkiakum, and Whatcom. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  12. Aesthetic Qualities of Cross Laminated Timber

    DEFF Research Database (Denmark)

    Bejder, Anne Kirkegaard

    to its sustainable profile. In parallel to this, new production methods and further refined timber products have been developed. Among these are the engineered timber-based product Cross Laminated Timber (CLT) that show enhanced structural properties compared to unrefined timber. However, the question...... an undefined aesthetic potential that may innovate how we construct and perceive timber architecture, the overall aim of the thesis is to inquire into the architectural and aesthetic qualities of CLT. Through three chapters this thesis examines and discusses 1) the architectural qualities of CLT, 2......) the materiality of CLT, and 3) how one can deal with these qualitative aspects in the design process. This leads to: firstly, the development of an explicit model to help structuring the analysis and evaluation of the materiality of CLT, and secondly, a clarification and articulation of the aesthetic qualities...

  13. Nailed timber beams with I composed section

    Directory of Open Access Journals (Sweden)

    Jorge Luís Nunes de Góes

    2003-01-01

    Full Text Available The employment of built-up timber beams, made of commercial dimensions pieces, is becoming increasingly important in timber structures in Brazil, mainly due to the ever-growing scarcity of timber elements in larger sizes. The built-up system has vast application, from beams for residential buildings to girders for small bridges. The objective of this work is the theoretical and experimental study of nailed timber beams with composed cross section I. The design procedure of EUROCODE 5/93 and NBR 7190/97 are shown and evaluated, as well as the theory about the subject matter. The experimental evaluation of the theoretical models was made by means of bending tests in prototypes of built-up timber beams. The obtained results shows that the EUROCODE 5/93 procedure is the most indicated for evaluating effective bending stiffness, normal and shear stresses as well as the load on fasteners.

  14. Reliability Analysis of Structural Timber Systems

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Hoffmeyer, P.

    2000-01-01

    Structural systems like timber trussed rafters and roof elements made of timber can be expected to have some degree of redundancy and nonlinear/plastic behaviour when the loading consists of for example snow or imposed load. In this paper this system effect is modelled and the statistic...... of variation. In the paper a stochastic model is described for the strength of a single piece of timber taking into account the stochastic variation of the strength and stiffness with length. Also stochastic models for different types of loads are formulated. First, simple representative systems with different...... types of redundancy and non-linearity are considered. The statistical characteristics of the load bearing capacity are determined by reliability analysis. Next, more complex systems are considered modelling the mechanical behaviour of timber roof elements I stressed skin panels made of timber. Using...

  15. Lake Michigan Offshore Wind Feasibility Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Boezaart, Arnold [GVSU; Edmonson, James [GVSU; Standridge, Charles [GVSU; Pervez, Nahid [GVSU; Desai, Neel [University of Michigan; Williams, Bruce [University of Delaware; Clark, Aaron [GVSU; Zeitler, David [GVSU; Kendall, Scott [GVSU; Biddanda, Bopi [GVSU; Steinman, Alan [GVSU; Klatt, Brian [Michigan State University; Gehring, J. L. [Michigan State University; Walter, K. [Michigan State University; Nordman, Erik E. [GVSU

    2014-06-30

    project including to: 1) test and validate floating LIDAR technology; 2) collect and access offshore wind data; 3) detect and measure bird and bat activity over Lake Michigan; 4) conduct an over water sound propagation study; 5) prepare and offer a college course on offshore energy, and; 6) collect other environmental, bathometric, and atmospheric data. Desk-top research was performed to select anchorage sites and to secure permits to deploy the buoy. The project also collected and analyzed data essential to wind industry investment decision-making including: deploying highly mobile floating equipment to gather offshore wind data; correlating offshore wind data with conventional on-shore MET tower data; and performing studies that can contribute to the advancement and deployment of offshore wind technologies. Related activities included: • Siting, permitting, and deploying an offshore floating MET facility; • Validating the accuracy of floating LWS using near shoreline cup anemometer MET instruments; • Assessment of laser pulse technology (LIDAR) capability to establish hub height measurement of wind conditions at multiple locations on Lake Michigan; • Utilizing an extended-season (9-10 month) strategy to collect hub height wind data and weather conditions on Lake Michigan; • Investigation of technology best suited for wireless data transmission from distant offshore structures; • Conducting field-validated sound propagation study for a hypothetical offshore wind farm from shoreline locations; • Identifying the presence or absence of bird and bat species near wind assessment facilities; • Identifying the presence or absence of benthic and pelagic species near wind assessment facilities; All proposed project activities were completed with the following major findings: • Floating Laser Wind Sensors are capable of high quality measurement and recordings of wind resources. The WindSentinel presented no significant operational or statistical limitations in

  16. A cut above: building the market for fair trade timber

    Energy Technology Data Exchange (ETDEWEB)

    MacQueen, Duncan

    2008-02-15

    Unlike coffee and cotton, timber has yet to become a fair trade commodity. But now its time has come. Rights over forest resources are increasingly ceded to small-scale community forest enterprises (CFEs), as large-scale industrial logging is now largely discredited in the sustainable development context. The fair trade emphasis on just pricing for poorer producers is exactly what CFEs need as incentive to invest in sustainable forest management — and secure environmental and poverty reduction benefits at one stroke. With fair trade timber, CFEs could boost their entrepreneurial capacity using democratic business models with in-built social and environmental responsibility. The Fair Trade Labelling Organizations International and Forest Stewardship Council are exploring the ways and means through a new partnership, but more is needed. Consumers must be made aware of why paying higher prices is key to creating CFE incentives for sustainable forest management and poverty reduction. Time and money are needed for consumer education and installing fair trade timber in producer country forest policies, market segregation and procurement policies at all levels.

  17. Temporal Decay in Timber Species Composition and Value in Amazonian Logging Concessions.

    Science.gov (United States)

    Richardson, Vanessa A; Peres, Carlos A

    2016-01-01

    Throughout human history, slow-renewal biological resource populations have been predictably overexploited, often to the point of economic extinction. We assess whether and how this has occurred with timber resources in the Brazilian Amazon. The asynchronous advance of industrial-scale logging frontiers has left regional-scale forest landscapes with varying histories of logging. Initial harvests in unlogged forests can be highly selective, targeting slow-growing, high-grade, shade-tolerant hardwood species, while later harvests tend to focus on fast-growing, light-wooded, long-lived pioneer trees. Brazil accounts for 85% of all native neotropical forest roundlog production, and the State of Pará for almost half of all timber production in Brazilian Amazonia, the largest old-growth tropical timber reserve controlled by any country. Yet the degree to which timber harvests beyond the first-cut can be financially profitable or demographically sustainable remains poorly understood. Here, we use data on legally planned logging of ~17.3 million cubic meters of timber across 314 species extracted from 824 authorized harvest areas in private and community-owned forests, 446 of which reported volumetric composition data by timber species. We document patterns of timber extraction by volume, species composition, and monetary value along aging eastern Amazonian logging frontiers, which are then explained on the basis of historical and environmental variables. Generalized linear models indicate that relatively recent logging operations farthest from heavy-traffic roads are the most selective, concentrating gross revenues on few high-value species. We find no evidence that the post-logging timber species composition and total value of forest stands recovers beyond the first-cut, suggesting that the commercially most valuable timber species become predictably rare or economically extinct in old logging frontiers. In avoiding even more destructive land-use patterns, managing

  18. 36 CFR 223.32 - Timber sale operating plan.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Timber sale operating plan... SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Contract Conditions and Provisions § 223.32 Timber sale operating plan. Sale contracts with a term of 2 years or more shall provide...

  19. Structural Reliability of the Nigerian Grown Abura Timber Bridge ...

    African Journals Online (AJOL)

    Structural reliability analysis was carried out on the Nigerian grown Abura timber, to ascertain its structural performance as timber bridge beams. Samples of the Nigerian grown Abura timber were bought from timber market, seasoned naturally and their structural/strength properties were determined at a moisture content of ...

  20. Hydropower build-up and the timber floating in Northern Finland after the Second World War

    Energy Technology Data Exchange (ETDEWEB)

    Haenninen, N. (Univ. of Oulu, Thule Inst. (Finland)). email: niko.hanninen@oulu.fi

    2009-07-01

    During the Second World War, Finland lost a substantial amount of built and yet un-built hydropower capacity to Soviet Union due to loss of Karelia. The most significant energy user at the time was the forest industry, especially paper and pulp mills, which had to replace this loss and to secure uninterrupted supply of energy in the future; otherwise the industry could not realise their expansion plans. One solution was to harness the still untouched northern waters for the service of the industry and society in large. However, these rivers served already the forest industry in another way, as transport routes in floating of timber. Vast waterways had made the emergence of forest industry in Finland possible. Transportation of timber from distant forests, located more than hundreds of kilometres away from the mills, was possible using rivers and lakes. Especially in Northern Finland the industry had to rely on floating as the railway network was less extensive than in some other parts of the country. The objective of this paper is to study closer, how the emergence of vast hydropower dams in these northern rivers from late 1940's to 1970's changed the transportation of timber. Road transportation in particular could not compete with floating because of their higher costs and the lack of suitable trucks and roads, but this changed after the war. Despite the fact that expanding industries consumed more and more timber, the role of floating decreased. But how did these ratios change during this period? Did the build-up of hydropower plants contribute to this shift of timber transportations from waterways to the land? Salmon and logs did not fit on the same river, the fishermen had to yield in the end. Did the hydropower plants do the same to the floaters

  1. Creating a Better Funding System for Michigan

    Science.gov (United States)

    Quinn, Daniel

    2010-01-01

    In 1994, Michigan voters approved a ballot initiative that transferred the power in Michigan's education system from local communities to the state. Proposal A succeeded in slowing the growth of local property taxes and narrowing the gap between the richest and poorest districts in Michigan. However, due to a decade of sluggish economic growth,…

  2. A reactive nitrogen budget for Lake Michigan

    Science.gov (United States)

    The reactive nitrogen budget for Lake Michigan was reviewed and updated, making use of recent estimates of watershed and atmospheric nitrogen loads. The updated total N load to Lake Michigan was approximately double the previous estimate from the Lake Michigan Mass Balance study ...

  3. Timber Price Dynamics Following a Natural Catastrophe

    OpenAIRE

    Jeffrey P. Prestemon; Thomas P. Holmes

    2000-01-01

    Catastrophic shocks to existing stocks of a renewable resource can cause long-run price shifts. With timber, these long-run price shifts may be accompanied by a short-run price drop due to salvage. Hurricane Hugo damaged 20% of southern pine timber in the South Carolina Coastal Plain in 1989. To estimate the short- and long-run effects of the hurricane on the prices of timber stocks, we estimated an intervention model of the residuals of cointegration of South Carolina sawtimber and pulpwood ...

  4. The Materiality of Novel Timber Architecture

    DEFF Research Database (Denmark)

    Bejder, Anne Kirkegaard; Kirkegaard, Poul Henning; Wraber, Ida Kristina

    2016-01-01

    In recent years, wood as a building material has gained renewed focus and, in parallel, new production methods and further refined timber products have been developed. Many of these novel timber building materials have gained significantly enhanced technical qualities, and the question is whether...... this is at the expense of wood’s sensuous and poetic qualities. The proposed method to deal with these questions is to develop a discursive model that can clarify aspects essential for analyzing and discussing the materiality of timber in its contemporary engineered forms. Firstly, this paper presents a theoretical...

  5. Managing for timber and biodiversity in the Congo Basin

    DEFF Research Database (Denmark)

    Nasi, Robert; Billand, Alain; van Vliet, Nathalie

    2012-01-01

    concessions) and analyze the existing issues and options for managing actively both timber and biodiversity with a special emphasis on wildlife and the role of certification. A few promising but yet ‘unfinished’ examples do exist in the region and we review these cases to draw lessons and recommendations. We...... contend however that true multiple-use could only be realized by expanding beyond boundaries of formal management units through new innovative land-use units, allowing a spatial cohabitation of the interests of local people, of conservation proponents and of extractive industries in the same management...

  6. Impact of professional foresters on timber harvests on West Virginia nonindustrial private forests

    Science.gov (United States)

    Stuart A. Moss; Eric. Heitzman

    2013-01-01

    Timber harvests conducted on 90 nonindustrial private forest properties in West Virginia were investigated to determine the effects that professional foresters have on harvest and residual stand attributes. Harvests were classified based on the type of forester involved: (1) consulting/state service foresters representing landowners, (2) industry foresters representing...

  7. Timber, Browse, and Herbage on Selected Loblolly-Shortleaf Pine-Hardwood Forest Stands

    Science.gov (United States)

    Gale L. Wolters; Alton Martin; Warren P. Clary

    1977-01-01

    A thorough vegetation inventory was made on loblolly-shortleaf pine-hardwood stands scheduled by forest industry for clearcutting, site preparation, and planting to pine in north central Louisiana and southern Arkansas. Overstory timber, on the average, contained about equal proportions of softwood and hardwood basal area. Browse plants ranged from 5,500 to over 70,...

  8. Timber supply and demand assessment of the Green and White Mountain National Forests' market area

    Science.gov (United States)

    Chris B. LeDoux; Paul E. Sendak; William H. McWilliams; Neil Huyler; Thomas Malecek; Worthen Muzzey; Toni Jones

    2001-01-01

    This report describes a timber supply and demand assessment of the Green and White Mountain National Forests' market area using USDA Forest Service, Forest Inventory and Analysis data, production information provided by forest industry, and a stump-to-mill logging cost-prediction model. Nonavailable timberland that includes reserve and steep-terrain lands is...

  9. Chapter 8: Fire Performance of Cross-Laminated Timber Assemblies (2012 US Edition)

    Science.gov (United States)

    Christian Dagenais; Robert H. White; Kuma Sumathipala

    2012-01-01

    Cross-laminated timber (CLT) is a promising wood-based structural component and has potential to provide cost-effective building solutions for residential, commercial and institutional buildings as well as large industrial facilities. Market acceptance of CLT requires that it meets the applicable building code requirements.

  10. Effects of Boreal Timber Rafting on the Composition of Arctic Driftwood

    Czech Academy of Sciences Publication Activity Database

    Hellmann, L.; Kirdyanov, A. V.; Büntgen, Ulf

    2016-01-01

    Roč. 7, č. 11 (2016), č. článku 257. ISSN 1999-4907 Institutional support: RVO:67179843 Keywords : boreal rivers * Arctic driftwood * timber logging * industrial floating * Siberia Subject RIV: GK - Forestry Impact factor: 1.951, year: 2016

  11. The wood quality of the South African timber resource for high-value ...

    African Journals Online (AJOL)

    However, the forest industry's future success will also be judged on how well it understands the qualities of the timber supply, how successful it is with the implementation of appropriate wood quality improvement strategies and how willing it is to introduce new species and hybrids which are unique and different from the ...

  12. Industry

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.

    2001-01-01

    This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

  13. Pollutant transformations over Lake Michigan

    International Nuclear Information System (INIS)

    Alkezweeny, A.J.; Arbuthnot, D.R.; Busness, K.M.; Easter, R.C.; Hales, J.M.; Lee, R.N.; Young, J.M.

    1979-01-01

    An aircraft, a chartered boat, and a constant altitude balloon were used to study pollutant transformations over Lake Michigan in a Lagrangian frame of reference. The experiments were conducted during the summer under strong atmospheric stability where diffusion and dry deposition of pollutants can be neglected

  14. Michigan School Privatization Survey 2013

    Science.gov (United States)

    Hohman, James M.; Fryzelka, Evan E.

    2014-01-01

    Many of Michigan's public school districts are under substantial fiscal pressures from a combination of declining enrollment and increasing costs, particularly related to employee benefits, but most districts are responding to these challenges. One of the ways that districts can stretch their resources further is through competitive contracting…

  15. Residential Energy Efficiency Potential: Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Eric J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-11-22

    Energy used by Michigan single-family homes that can be saved through cost-effective improvements. Prepared by Eric Wilson and Noel Merket, NREL, and Erin Boyd, U.S. Department of Energy Office of Energy Policy and Systems Analysis.

  16. Reliability and Robustness Evaluation of Timber Structures

    DEFF Research Database (Denmark)

    Cizmar, Dean; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    In the last few decades there have been intensely research concerning reliability of timber structures. This is primarily because there is an increased focus on society on sustainability and environmental aspects. Modern timber as a building material is also being competitive compared to concrete...... and steel. However, reliability models applied to timber were always related to individual components but not the systems. as any real structure is a complex system, system behaviour must be of a particular interest. In the chapter 1 of this document an overview of stochastic models for strength and loads...... (deterministic, probabilistic and risk based approaches) of the robustness are given. Chapter 3 deals more detailed with the robustness of timber structures....

  17. Statistical Analysis of Data for Timber Strengths

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Hoffmeyer, P.

    Statistical analyses are performed for material strength parameters from approximately 6700 specimens of structural timber. Non-parametric statistical analyses and fits to the following distributions types have been investigated: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...

  18. Profitability of timber harvesting and timber transportation enterprises

    International Nuclear Information System (INIS)

    Rajamaeki, J.

    1996-01-01

    In co-operation with the major companies contracting out forestry work and Statistics Finland, Metsaeteho carried out a project with the objective of analysing the economic profitability of timber harvesting and transportation enterprises in 1994. The calculation of profitability was based on utilisation of last livelihoods taxation data (EVR) that Statistics Finland was in possession of. The basic material comprised data that the companies contracting out forestry work had full-time entrepreneurs. There were 255 forestry machine contractor enterprises and 270 trucking enterprises. Statistics Finland was responsible for computations of the results of the project. The calculation of the indicators of profitability was based on the recommendations of Yritystutkimusneuvottelukunta, a committee looking into the functioning of enterprises. The year 1994 was a good year from the viewpoint of profitability of both forestry machine contractors as well as trucking enterprises. With full depreciations and salary adjustments attended to, both enterprise groups still showed a mean profitability of ca. 8 %. The yield of invested capital was ca. 25 %. The differences in profitability among enterprises were great in both groups and in different parts of the country

  19. Minimizing driving times and greenhouse gas emissions in timber transport with a near-exact solution approach

    DEFF Research Database (Denmark)

    Oberscheider, Marco; Zazgornik, Jan; Henriksen, Christian Bugge

    2013-01-01

    Efficient transport of timber for supplying industrial conversion and biomass power plants is a crucial factor for competitiveness in the forest industry. Throughout the recent years minimizing driving times has been the main focus of optimizations in this field. In addition to this aim the objec...

  20. The Integration of Timber Enterprises of the Khanty-Mansiysk Autonomous Okrug — Yugra

    Directory of Open Access Journals (Sweden)

    Irina Anatolyevna Kislukhina

    2018-03-01

    Full Text Available The article investigates the timber enterprises’ integration in Khanty-Mansiysk Autonomous Okrug — Yugra as a way to improve the efficiency of the timber industry. Currently, in the region, only 10 of 130 timber enterprises are large and mediumsized enterprises. The other companies are small and chronically underfunded. These small enterprises use outdated equipment and production technology, are unable to organize wood processing and reforestation; to develop forest infrastructure. However, the integration of timber industry enterprises can become the way to address this situation. The article discusses various types of possible enterprises’ integration, such as vertical and horizontal integrations, the combined and unrelated diversification (financial integration. The combined diversification is a mixed type of the integration of enterprises from related and unrelated industries. This type of integration is most in keeping with the characteristics of the development of timber industry of Khanty- Mansiysk Autonomous Okrug — Yugra. The combined diversification will maximize the effect from the association of enterprises. The author has justified the rationale for establishing six integrated industrial and financial associations (IIFA according to improved forest and economical zoning of Okrug area. I defined the profile of each IIFA taking into account of special aspects of forest resources as well as social and economical development characteristics of the area and demand for the products. In Khanty-Mansiysk Autonomous Okrug — Yugra, the integrated industrial and financial associations will address four critical challenges of the socio-economic development of the region. Firstly, these associations will contribute to the diversification of the economy. Secondly, they will enable the production of new types of forest products. Thirdly, the creation of the integrated industrial and financial associations will increase the efficiency in

  1. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  2. Industrialization

    African Journals Online (AJOL)

    Lucy

    scholar, Walt W. Rostow presented and supported this line of thought in his analysis of ... A Brief Historical Background of Industrialization in Africa ... indicative) The western model allowed for the political economy to be shaped by market.

  3. Michigan State Briefing Book for low-level radioactive waste management

    International Nuclear Information System (INIS)

    1980-11-01

    The Michigan State Briefing Book is one of a series of state briefing books on low-level radioactive waste management practices. It has been prepared to assist state and federal agency officials in planning for safe low-level radioactive waste disposal. The report contains a profile of low-level radioactive waste generators in Michigan. The profile is the result of a survey of NRC licensees in Michigan. The briefing book also contains a comprehensive assessment of low-level radioactive waste management issues and concerns as defined by all major interested parties including industry, government, the media, and interest groups. The assessment was developed through personal communications with representatives of interested parties, and through a review of media sources. Lastly, the discussion of relevant government agencies and activities, all of which may impact waste management practices in Michigan

  4. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  5. The copper deposits of Michigan

    Science.gov (United States)

    Butler, B.S.; Burbank, W.S.

    1929-01-01

    The copper district of Keweenaw Point, in the northern peninsula of Michigan, is the second largest producer of copper in the world.  The output of the district since 1845 has been more than 7,500,000,000 pounds and showed a rather steady and consistent increase from the beginning of production to the end of the World War in 1918, since which there has been a marked decrease.

  6. Active Traffic Management in Michigan

    OpenAIRE

    Johnson, Pat

    2018-01-01

    The US 23 Flex Route is the first active traffic management (ATM) project in the state of Michigan. This route utilizes overhead lane control gantries equipped with various intelligent transportation system (ITS) equipment to facilitate the following ATM strategies: dynamic shoulder use, dynamic lane control, variable speed advisories, and queue warning. The focus of this presentation is how the project team overcame several challenges during the planning, design, and system management phases...

  7. Reinforcement and recovery of timber structures

    Directory of Open Access Journals (Sweden)

    Antonio Alves Dias

    2006-02-01

    Full Text Available Preservation of timber structures is a reason for constant concern because their deterioration often involves compromising the historical patrimony, besides endangering the safety of the structure, and consequently, of their users. Many are the examples of churches, residences or other constructions where this manifestation is a fact. The technique of reinforcing structurally endangered pieces with the addition of natural or synthetic fibers, is an alternative that has been researched. In the group of synthetic fibers, fiberglass, carbon and aramid ones are included. On the other hand, it has been frequent in the restoration of old buildings, especially in Europe, the employment of materials that were not available in the past, aiming to achieve structural, acoustic and aesthetic benefits. On an existing timber structure floor, a concrete slab has been carried out, with an appropriate connection system among the parts, constituting the composite timber-concrete structures. This alternative has been considered as extraordinarily viable, because it gathers a series of convenience related with the durability and it presents better mechanic performance than conventional timber structures. In this work, the state-of-the-art of the use of fibers as structural reinforcement and of the timber-concrete composite structures, is presented.

  8. Development of Timber Property Classification Based on the End-Use with Reference to Twenty Sri Lankan Timber Species

    Directory of Open Access Journals (Sweden)

    ND Ruwanpathirana

    2014-06-01

    Full Text Available An investigation was carried out on selected 20 timber species of Sri Lanka to study different wood properties, i.e., wood density, modulus of rapture, modulus of elasticity, compression parallel to grain, shrinkage/movement, workability (sawing, nailing, sanding and finishing, treatability of preservative, timber durability, timber texture by vessel diameter and some gross properties, timber colour and present timber uses. Based on the results, an attempt was made to classify the studied timber species into property levels. The final objective of this study was to develop relationships between the end-uses of timber and their property requirements and levels with reference to 20 Sri Lankan timber species.   Timber selection for the use in Sri Lanka is species-oriented and sometimes it is based on the traditional use. Based on wood properties of 20 Sri Lankan timber species selected, an attempt was made to recognise the most important wood properties and their levels to develop a four end-use property classification. In general, the proposed end-use property classification in this study could be differentiated as (i. for building construction, (ii. for furniture and joinery (iii. for light construction, and (iv. for miscellaneous uses. Among the selected timber species, Dipterocarpus zeylanicus is eminently suitable for under-water work. Eucalyptus microcorys is regarded as one of the best timbers for dancing floors. These specialty and causative factors of timber, however, must be explored and documented in order to prepare end-use property classification for miscellaneous use.

  9. Economic implications of manufacturing sawed ties and timbers

    Science.gov (United States)

    Lawrence D. Garrett; Lawrence D. Garrett

    1969-01-01

    The purpose of this paper is to discuss those factors that affect the profitability of manufacturing timbers and show that the combined manufacture of both lumber and timbers will provide a greater daily income than the manufacture of lumber alone.

  10. Timber resource statistics for the Olympic Peninsula, Washington.

    Science.gov (United States)

    Patricia M. Bassett; Daniel D. Oswald

    1961-01-01

    This report summarizes a 1978-79 timber resource inventory of five counties in the Olympic Peninsula of Washington: Clallam, Grays Harbor, Jefferson, Mason, and Thurston. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  11. Recent geologic development of Lake Michigan (U.S.A.)

    Science.gov (United States)

    Gross, D.L.; Cahill, R.A.

    1983-01-01

    The stresses placed on Lake Michigan since the advent of industrialization require knowledge of the sedimentology of the whole lake in order to make informed decisions for environmental planning. Sediment accumulation rates are low: areas of the lake receiving the most sediment average only 1 mm a-1; deep-water basins average 0.1 to 0.5 mm a-1; and large areas are not receiving any sediment. Sediment was deposited rapidly (typically 5 mm a-1), in the form of rock flour, during the deglaciation of both Lake Michigan and Lake Superior Basins. Then the rate of accumulation decreased by 80-90% and has remained relatively constant since final deglaciation. Because active sedimentation occurs mostly in the deep water areas of the lake, the sediment remains undisturbed and contains a record of the chemical history of the lake. ?? 1983 Dr W. Junk Publishers.

  12. Measuring the sustain ability of the timber industry in Europe. A multi criteria approach based on the aggregation of indicators; La medicion de la sostenibilidad de la madera en Europa. Un enfoque multicriterio basado en la agregacion de indicadores

    Energy Technology Data Exchange (ETDEWEB)

    Voces, R.; Diaz, L.; Romero, C.

    2009-07-01

    Sustain ability is a multidimensional concept in continuous evolution. However, it is widely accepted the suitability of using several indicators of different nature to characterise and to quantify this concept. Within this orientation, in this paper the sustain ability of the wood industry in a significant number of European countries is analysed. To achieve this purpose, a set of economic, environmental and social indicators are defined for the years 2003 and 2004. With the help of a binary goal programming model, this indicators are aggregated into a synthetic index that measures the overall sustain ability. In this way, it is obtained a ranking in terms of sustain ability of the wood products industry in the European countries studied. (Author) 19 refs.

  13. Methodology for safety evaluation of existing timber elements

    OpenAIRE

    Sousa, Hélder S.

    2013-01-01

    Tese de doutoramento em Engenharia Civil The past decades have seen a renewed interest in timber research related topics. As instance, timber engineering is not only confined to the design of new construction with innovative wood based products, but also an increasing awareness for the preservation of existing timber structures is visible in nowadays society. Therefore, arises the need for a better understanding of timber performance as a construction material aiming at a bette...

  14. Forest biomass flow for fuel wood, fodder and timber security among tribal communities of Jharkhand.

    Science.gov (United States)

    Islam, M A; Quli, S M S; Rai, R; Ali, Angrej; Gangoo, S A

    2015-01-01

    The study investigated extraction and consumption pattern of fuel wood, fodder and timber and forest biomass flow for fuel wood, fodder and timber security among tribal communities in Bundu block of Ranchi district in Jharkhand (India). The study is based on personal interviews of the selected respondents through structured interview schedule, personal observations and participatory rural appraisal tools i.e. key informant interviews and focus group discussions carried out in the sample villages, using multi-stage random sampling technique. The study revealed that the total extraction of fuel wood from different sources in villages was 2978.40 tons annum(-1), at the rate of 0.68 tons per capita annum(-1), which was mostly consumed in cooking followed by cottage industries, heating, community functions and others. The average fodder requirement per household was around 47.77 kg day(-1) with a total requirement of 14227.34 tons annum(-1). The average timber requirement per household was computed to be 0.346 m3 annum(-1) accounting for a total timber demand of 282.49 m3 annum(-1), which is mostly utilized in housing, followed by agricultural implements, rural furniture, carts and carriages, fencing, cattle shed/ store house and others. Forest biomass is the major source of fuel wood, fodder and timber for the primitive societies of the area contributing 1533.28 tons annum(-1) (51.48%) of the total fuel wood requirement, 6971.55 tons annum(-1) (49.00%) of the total fodder requirement and 136.36 m3 annum(-1) (48.27%) of the total timber requirement. The forest biomass is exposed to enormous pressure for securing the needs by the aboriginal people, posing great threat to biodiversity and environment of the region. Therefore, forest biomass conservation through intervention of alternative avenues is imperative to keep pace with the current development and future challenges in the area.

  15. Probabilistic Modelling of Timber Material Properties

    DEFF Research Database (Denmark)

    Nielsen, Michael Havbro Faber; Köhler, Jochen; Sørensen, John Dalsgaard

    2001-01-01

    The probabilistic modeling of timber material characteristics is considered with special emphasis to the modeling of the effect of different quality control and selection procedures used as means for grading of timber in the production line. It is shown how statistical models may be established...... on the basis of the same type of information which is normally collected as a part of the quality control procedures and furthermore, how the efficiency of different control procedures may be compared. The tail behavior of the probability distributions of timber material characteristics play an important role...... such that they may readily be applied in structural reliability analysis and the format appears to be appropriate for codification purposes of quality control and selection for grading procedures...

  16. 36 CFR 223.62 - Timber purchaser road construction credit.

    Science.gov (United States)

    2010-07-01

    ... § 223.62 Timber purchaser road construction credit. Appraisal may also establish stumpage value as if... timber is appraised and sold on such basis, purchaser credit for road construction, not to exceed the estimated construction cost of such roads or other developments specified in the timber sale contract, shall...

  17. Safety of timber : An analysis of quality control options

    NARCIS (Netherlands)

    Kovryga, A.; Stapel, P.; Van de Kuilen, J.W.G.

    2014-01-01

    The quality assurance of timber properties is important for the safety of timber structures. In the current study, the quality control options of timber are analysed under the prism of the different growth regions. Therefore, these options - machine and output control - are simulated in accordance

  18. Modified traditional Japanese timber joint system with retrofitting abilities

    NARCIS (Netherlands)

    Shiratori, T.; Komatsu, K.; Leijten, A.J.M.

    2008-01-01

    Embedment is a key feature of timber joints envisioned as the ultimate solution in avoiding the devastating full collapse of timber structures in seismic countries. The Japanese traditional timber post-and-beam structural system utilizes moment-resisting joints based on embedment. Despite the

  19. Effect of timber supplies on the efficiency of coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Kulish, S A; Ponikarov, V D

    1977-01-01

    An analysis is made of the system of supplying coal mining production associations with timber materials. The potential for greater efficiency in the use and processing of timber is indicated. The possibility of using methods of mathematical modelling and forecasting to improve the efficiency of supplying timber to coal associations is demonstrated. 1 table.

  20. Enviromentally Sound Timber Extracting Techniques for Small Tree Harvesting

    Science.gov (United States)

    Lihai Wang

    1999-01-01

    Due to large area disturbed and great deal of energy cost during-its operations, introducing or applying the appropriate timber extracting techniques could significantly reduce the impact of timber extraction operations to forest environment while pursuing the reasonable operation costs. Four environmentally sound timber extraction techniques for small tree harvesting...

  1. Aggregate Timber Supply: From the Forest to the Market

    Science.gov (United States)

    David N. Wear; Subhrendu K. Pattanayak

    2003-01-01

    Timber supply modeling is a means of formalizing the production behavior of heterogeneous landowners managing a wide variety of forest types and vintages within a region. The critical challenge of timber supply modeling is constructing theoretically valid and empirically practical aggregate descriptions of harvest behavior. Understanding timber supply is essential for...

  2. Robustness Analysis of Timber Truss Structure

    DEFF Research Database (Denmark)

    Rajčić, Vlatka; Čizmar, Dean; Kirkegaard, Poul Henning

    2010-01-01

    The present paper discusses robustness of structures in general and the robustness requirements given in the codes. Robustness of timber structures is also an issues as this is closely related to Working group 3 (Robustness of systems) of the COST E55 project. Finally, an example of a robustness...... evaluation of a widespan timber truss structure is presented. This structure was built few years ago near Zagreb and has a span of 45m. Reliability analysis of the main members and the system is conducted and based on this a robustness analysis is preformed....

  3. Timber Elements: Traditional and Modern Strengthening Techniques

    Directory of Open Access Journals (Sweden)

    Raluca Hohan

    2010-01-01

    Full Text Available The main idea of this paper is to analyse the means for the rehabilitation of our cultural heritage timber structures. Several methods together with their application techniques are described, and also, the reasons for what these strengthening operations become imminent at a point. First of all, the necessity of the timber structural elements strengthening is explained through a short presentation of the factors which are degrading the material. Then, certain precautions and strengthening procedures are presented, all involving the usage of traditional materials like wood, metal, or concrete, and of modern materials like fiber reinforced polymeric composite.

  4. Robustness of Long Span Reciprocal Timber Structures

    DEFF Research Database (Denmark)

    Balfroid, Nathalie; Kirkegaard, Poul Henning

    2011-01-01

    engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper makes a discussion of such robustness issues related to the future development of reciprocal timber structures. The paper concludes that these kind of structures can have...... a potential as long span timber structures in real projects if they are carefully designed with respect to the overall robustness strategies.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. The interest has also been facilitated due to recently severe structural failures...

  5. Statistical Analysis of Data for Timber Strengths

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2003-01-01

    Statistical analyses are performed for material strength parameters from a large number of specimens of structural timber. Non-parametric statistical analysis and fits have been investigated for the following distribution types: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...... fits to the data available, especially if tail fits are used whereas the Log Normal distribution generally gives a poor fit and larger coefficients of variation, especially if tail fits are used. The implications on the reliability level of typical structural elements and on partial safety factors...... for timber are investigated....

  6. Projected US timber and primary forest product market impacts of climate change mitigation through timber set-asides

    Science.gov (United States)

    Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

    2013-01-01

    Whereas climate change mitigation involving payments to forest landowners for accumulating carbon on their land may increase carbon stored in forests, it will also affect timber supply and prices. This study estimated the effect on US timber and primary forest product markets of hypothetical timber set-aside scenarios where US forest landowners would be paid to forego...

  7. FINAL TECHNICAL REPORT FOR FORESTRY BIOFUEL STATEWIDE COLLABORATION CENTER (MICHIGAN)

    Energy Technology Data Exchange (ETDEWEB)

    LaCourt, Donna M.; Miller, Raymond O.; Shonnard, David R.

    2012-04-24

    A team composed of scientists from Michigan State University (MSU) and Michigan Technological University (MTU) assembled to better understand, document, and improve systems for using forest-based biomass feedstocks in the production of energy products within Michigan. Work was funded by a grant (DE-EE-0000280) from the U.S. Department of Energy (DOE) and was administered by the Michigan Economic Development Corporation (MEDC). The goal of the project was to improve the forest feedstock supply infrastructure to sustainably provide woody biomass for biofuel production in Michigan over the long-term. Work was divided into four broad areas with associated objectives: • TASK A: Develop a Forest-Based Biomass Assessment for Michigan – Define forest-based feedstock inventory, availability, and the potential of forest-based feedstock to support state and federal renewable energy goals while maintaining current uses. • TASK B: Improve Harvesting, Processing and Transportation Systems – Identify and develop cost, energy, and carbon efficient harvesting, processing and transportation systems. • TASK C: Improve Forest Feedstock Productivity and Sustainability – Identify and develop sustainable feedstock production systems through the establishment and monitoring of a statewide network of field trials in forests and energy plantations. • TASK D: Engage Stakeholders – Increase understanding of forest biomass production systems for biofuels by a broad range of stakeholders. The goal and objectives of this research and development project were fulfilled with key model deliverables including: 1) The Forest Biomass Inventory System (Sub-task A1) of feedstock inventory and availability and, 2) The Supply Chain Model (Sub-task B2). Both models are vital to Michigan’s forest biomass industry and support forecasting delivered cost, as well as carbon and energy balance. All of these elements are important to facilitate investor, operational and policy decisions. All

  8. 2005 wood harvests in France - a definite recovery for timber and dendro-energy

    International Nuclear Information System (INIS)

    Cinotti, B.

    2007-01-01

    After dropping to 32.8 million m 3 in 2003, sales of wood harvests continue the recovery that began in 2004 and have reached 37.2 million m 3 (+ 5%) i.e., slightly more than the level reached prior to the 1999 storms (36.9 million m 3 ). Workable timber sales have increased by 5.9% up to 22.1 million m 3 but are nonetheless 4.5% below their 1999 level (23.2 million m 3 ). Industrial round-wood harvests have remained stable at 12.2 million m 3 (of which 11.8 are pulpwood). Sales of firewood have increased 23% (2.9 million m 3 ). Pre-tax roadside value of the entire wood harvest is estimated to be 1.64 billion Euro. French production of sawing timber is 9.7 million cubic metres with sawn softwood timber stagnating (+ 0.5%) and a drop in sawn hardwood timber (- 4.6%). The effects of the storms at the end of 1999 on the business cycle are no longer perceptible. Their consequences on the structure of harvests and of businesses are beginning to be understood. Average wood prices increased considerably in 2005 and 2006. These rosier market conditions for unprocessed timber could be an opportunity to continue with restructuring of the sector, in particular so as to further streamline harvests and narrow the wide gap between loggable and actually logged volumes, as well as to review the distribution of added value between the various players in the forest-based industries. (authors)

  9. Estimation of Cost Pass Through to Michigan Consumers in the ADM Price Fixing Case

    OpenAIRE

    Cotterill, Ronald W.

    1998-01-01

    This report analyzes the economic impact of price fixing in the wet corn milling industry on consumers in the State of Michigan. Two of the companies who produce citric acid have pleaded guilty to fixing its price. In this report we assume that price fixing also occurred among HFCS producers. Given the structure of the corn wet milling industry and the direct purchaser industries, the overcharge is essentially uniform across buyers and selling arrangements. We develop an actual economic model...

  10. Space-time modeling of timber prices

    Science.gov (United States)

    Mo Zhou; Joseph Buongriorno

    2006-01-01

    A space-time econometric model was developed for pine sawtimber timber prices of 21 geographically contiguous regions in the southern United States. The correlations between prices in neighboring regions helped predict future prices. The impulse response analysis showed that although southern pine sawtimber markets were not globally integrated, local supply and demand...

  11. Standard plans for timber bridge superstructures

    Science.gov (United States)

    James P. Wacker; Matthew S. Smith

    2001-01-01

    These standardized bridge plans are for superstructures consisting of treated timber. Seven superstructure types are includes: five longitudinal and two transverse deck systems. Both HS520 and HS25 loadings are included, along with L/360 and L/500 deflection criteria.

  12. Timber resource of Minnesota's Prairie unit, 1977.

    Science.gov (United States)

    Jerold T. Hahn; W. Brad Smith

    1980-01-01

    The fourth inventory of Minnesota's Prairie Unit shows that although commercial forest area decreased 31.7% between 1962 and 1977, growing-stock volume increased 22%. This report gives statistical highlights and contains detailed tables of forest area as well as timber volume, growth, mortality, ownership, and use.

  13. Projecting Timber Inventory at the Product Level

    Science.gov (United States)

    Lawrence Teeter; Xiaoping Zhou

    1999-01-01

    Current timber inventory projections generally lack information on inventory by product classes. Most models available for inventory projection and linked to supply analyses are limited to projecting aggregate softwood and hardwood. The research presented describes a methodology for distributing the volume on each FIA (USDA Forest Service Forest Inventory and Analysis...

  14. Residual load carrying capacity of timber joints

    NARCIS (Netherlands)

    Kuilen, J.W.G. van de

    1999-01-01

    Timber joints that have been preloaded for 2 to 8 years have been short term tested in accordance with EN 26891. The applied load levels varied between 30% and 50% of the average short term strength. The study comprised nailed, toothed-plate and split-ring joints. All joints were made of spruce and

  15. Commercial lumber, round timbers, and ties

    Science.gov (United States)

    David E. Kretschmann

    2010-01-01

    When sawn, a log yields round timber, ties, or lumber of varying quality. This chapter presents a general discussion of grading, standards, and specifications for these commercial products. In a broad sense, commercial lumber is any lumber that is bought or sold in the normal channels of commerce. Commercial lumber may be found in a variety of forms, species, and types...

  16. Grading timber and glued structural members

    Science.gov (United States)

    David E. Kretschmann; Roland Hernandez

    2006-01-01

    Because of its biological nature, which is influenced by many factors as discussed in Chapter 6, the quality of timber is enormously variable. Therefore, some sort of arrangement or classification must be undertaken prior to its use, in order to get the most out of this valuable resource. It is obvious that not all lumber can be used for the same purposes because not...

  17. Pocket Checklists of Indonesian timber trees

    NARCIS (Netherlands)

    Prawira, Soewanda A.; Tantra, I.G.M.; Whitmore, T.C.

    1984-01-01

    Indonesia as yet does not have a comprehensive account of the forest trees which reach timber size (35 cm dbh = 14 inch or 105 cm gbh = 42 inch). A project has been started in August 1983 by the Botany Section of the Forest Research Institute in Bogor, Indonesia, to prepare pocket checklists of the

  18. Non-timber forest products in Hawaii

    Science.gov (United States)

    Katie Kamelamela; James B. Friday; Tamara Ticktin; Ashley. Lehman

    2015-01-01

    Hawaiian forests provide a wide array of non-timber forest products for both traditional and modern uses. Flowers, vines, and ferns are collected for creating garlands or lei for hula dances and parades. Lei made from materials gathered in the forest are made for personal use and sold, especially during graduation times. Bamboo is harvested for structures and for...

  19. Ground-water contamination and legal controls in Michigan

    Science.gov (United States)

    Deutsch, Morris

    1963-01-01

    The great importance of the fresh ground-water resources of Michigan is evident because 90 percent of the rural and about 70 percent of the total population of the State exclusive of the Detroit metropolitan area are supplied from underground sources. The water-supply and public-health problems that have been caused by some cases of ground-water contamination in the State illustrate the necessity of protecting this vital resource.Manmade and natural contaminants, including many types of chemical and organic matter, have entered many of the numerous aquifers of the State. Aquifers have been contaminated by waste-laden liquids percolating from the surface or from the zone of aeration and by direct injection to the aquifer itself. Industrial and domestic wastes, septic tanks, leaking sewers, flood waters or other poor quality surface waters, mine waters, solids stored or spread at the surface, and even airborne wastes all have been sources of ground-water contamination in Michigan. In addition, naturally occurring saline waters have been induced into other aquifers by overpumping or unrestricted flow from artesian wells, possibly by dewatering operations, and by the deepening of surface stream channels. Vertical migration of saline waters through open holes from formations underlying various important aquifers also has spoiled some of the fresh ground waters in the State. In spite of the contamination that has occurred, however, the total amount of ground water that has been spoiled is only a small part of the total resource. Neither is the contamination so widespread as that of the surface streams of Michigan.Overall legal authority to control most types of ground-water contamination in the State has been assigned by the Michigan Legislature to the Water Resources Commission, although the Department of Conservation and the Health Department also exercise important water-pollution control functions. The Michigan Supreme Court, in an important case upholding the power

  20. Arkansas's timber industry-an assessment of timber product output and use, 2005

    Science.gov (United States)

    James W. Bentley; Michael Howell; Tony G. Johnson

    2008-01-01

    In 2005, roundwood output from Arkansas's forests totaled 749 million cubic feet. Mill byproducts generated from primary manufacturers were 354 million cubic feet. Almost all plant residues were used, primarily for fuel and fiber products. Saw logs were the leading roundwood product at 390 million cubic feet; pulpwood ranked second at 235 million cubic feet; and...

  1. Timber resources of New England and New York with reference to pulpwood supplies

    Science.gov (United States)

    V. L. Harper

    1947-01-01

    Pulp and paper is the most important of the wood-using industries of the Northeast. In value of product, value added by manufacture, and number of persons employed, it exceeds any other, but like all the others it is having increasing difficulties in procurement of timber supplies. Many of the pulp and paper mills have reached the stage where they are running out of...

  2. Utilization of Oregon’s timber harvest and associated direct economic effects.

    Science.gov (United States)

    Krista M. Gebert; Charles E. Keegan; Sue Willits; Al. Chase

    2002-01-01

    With more than 16 million acres of commercial timberland, Oregon’s forest products industry is an important part of Oregon’s economy and a major player in the Nation’s wood products market. Despite declining production over the last decade, in 1998 Oregon was still the leading producer of softwood lumber and plywood in the United States, and the timber harvested in...

  3. Some timber product market and trade implications of an invasive defoliator: the case of Asian lymantria in the United States

    Science.gov (United States)

    Jeffrey P. Prestemon; James A. Turner; Joseph Buongiorno; Shushuai Zhu; Ruhong Li

    2008-01-01

    US policy and forest product industry decisionmakers need quantitative information about the magnitude of timber product market impacts from the possible introduction of an exotic and potentially dangerous defoliating forest pest. We applied the Global Forest Products Model to evaluate the effects on the United States of an invasion by the Asian gypsy (...

  4. Managing timber to promote sustainable forests: a second-level course for the Sustainable Forestry Initiative of Pennsylvania

    Science.gov (United States)

    James C. Finley; Susan L. Stout; Timothy G. Pierson; Barbara J. McGuinness

    2007-01-01

    At least 80 percent of the raw material used for wood products by the forest industry is from privately owned woodlands. This publication provides material for a course designed to help landowners, foresters, and loggers work together to assess whether a planned timber harvest will retain the diversity of species on site. It includes methods for collecting overstory...

  5. Overview of a Project to Quantify Seismic Performance Factors for Cross Laminated Timber Structures in the United States

    Science.gov (United States)

    M. Omar Amini; John W. van de Lindt; Shiling Pei; Douglas Rammer; Phil Line; Marjan Popovski

    2014-01-01

    Cross-laminated Timber (CLT) has been extensively used in Europe and is now gaining momentum in North America; both Canada and more recently the U.S. Construction projects have shown that CLT can effectively be used as an alternative construction material in mid-rise structures and has significant potential in commercial and industrial buildings. In the United States,...

  6. Hardwood Face Veneer and Plywood Mill Closures in Michigan and Wisconsin Since 1950

    Science.gov (United States)

    Lewis T. Hendricks

    1966-01-01

    In recent years there has been a great deal of concern about the closure of numberous hardwood face veneer and plywood mills in Michigan and Wisconsin. As part of an overall study of that industry in the northern Lake States region, the basic reasons leading to the closure of these mills were investigated. In the past 15 years, there have been eight known mill...

  7. Fish impingement at Lake Michigan power plants

    International Nuclear Information System (INIS)

    Sharma, R.K.; Freeman, R.F.; Spigarelli, S.A.

    1976-01-01

    A study was initiated in 1974 to survey the magnitude and to evaluate the impact of fish impingement at 20 power plants on the Great Lakes. Data on impingement rates, site characteristics, intake designs and operational features have been collected and analyzed. Interpretive analyses of these data are in progress. The objectives of this study were: to summarize fish impingement data for Lake Michigan (16/20 plants surveyed are on Lake Michigan); to assess the significance of total and source-related mortalities on populations of forage and predator species; and to expand the assessment of power plant impingement to include all water intakes on Lake Michigan. Data are tabulated

  8. Cost and return structure in sawmill industry in Ijebu Ode, Ogun state ...

    African Journals Online (AJOL)

    Cost and return structure in sawmill industry in Ijebu Ode, Ogun state, Nigeria. ... The finding showed that 32.6% of the industries were retailers while 30.4% were wholesalers of timbers and both had regular supply of the products. The working capital among the timbers business was N3,641,905.6 and the average annual ...

  9. Biomass availability in forests, poplar plantations and hedges for various timber uses. National assessment based on the national forest inventory data and wood consumption statistics

    International Nuclear Information System (INIS)

    Ginisty, Christian; Vallet, Patrick; Chevalier, Helene; COLIN, Antoine

    2011-01-01

    This article provides an assessment of the quantities of potentially exploitable timber in French forests, poplar plantations and hedges for the period 2007 to 2020. The first step consisted in computing the gross available quantities of timber, prior to deduction of the various current consumptions. This was done applying the reference silvicultural scenarios to all the plots in the French national forest inventory, on the basis of their features (species, structure, fertility, age, observed per hectare volume). Current consumption was then subtracted from these quantities. It was estimated using the annual sectoral 'forest exploitation' survey in industry and an estimation of fuelwood consumption by households. The outcome is an excess availability of more than 28 million cubic metres of timber per year for bio-energy or pulp uses, and nearly 15 million cubic metres of workable timber, essentially hardwoods. (authors)

  10. Framework for Robustness Assessment of Timber Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2011-01-01

    This paper presents a theoretical framework for the design and analysis of robustness of timber structures. This is actualized by a more4 frequent use of advanced types of timber structures with limited redundancy and serious consequences in the case of failure. Combined with increased requirements...... to efficiency in design and execution followed by increased risk of human errors has made the need of requirements to robustness of new structures essential. Further, the collapse of the Ballerup Super Arena, the bad Reichenhall Ice-Arena and a number of other structural systems during the last 10 years has...... increased the interest in robustness. Typically, modern structural design codes require that ‘the consequence of damages to structures should not be disproportional to the causes of the damages’. However, although the importance of robustness for structural design is widely recognized, the code requirements...

  11. Timber Curtain: Designing with material capabilities

    DEFF Research Database (Denmark)

    Lahmy, Maya; Larsen, Niels Martin

    2015-01-01

    of the generative phase to fabrication of the artefact. Brought together by various conceptual and structural elements the Timber Curtain forms a 4.5 x 2.5 x 0.5 m construct of assembled wood components, digitally crafted through advanced production techniques. Concerned with materiality and processing of the wood......Timber Curtain explores relations between digital precision and material indeterminacy. It is an installation engaging spatially through its presence as a 1:1 architectural component as well as it is exploring novel technologies in the architectural design process from the very beginning...... an associative digital model that could gather and compute in put from material behaviour and out put manufacturing data was scripted. This method enables material capacity to be pushed to the limit of its performance allowing novel sensuous and structural qualities to emerge. The method is developed with use...

  12. Robustness Assessment of Spatial Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning

    2012-01-01

    Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern buildi...... to robustness of spatial timber structures and will discuss the consequences of such robustness issues related to the future development of timber structures.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern building...... codes consider the need for robustness of structures and provide strategies and methods to obtain robustness. Therefore a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper summaries issues with respect...

  13. Probabilistic Modeling of Graded Timber Material Properties

    DEFF Research Database (Denmark)

    Faber, M. H.; Köhler, J.; Sørensen, John Dalsgaard

    2004-01-01

    The probabilistic modeling of timber material characteristics is considered with special emphasis to the modeling of the effect of different quality control and selection procedures used as means for quality grading in the production line. It is shown how statistical models may be established...... on the basis of the same type of information which is normally collected as a part of the quality control procedures and furthermore, how the efficiency of different control procedures may be quantified and compared. The tail behavior of the probability distributions of timber material characteristics plays...... such that they may readily be applied in structural reliability analysis and their format appears to be appropriate for codification purposes of quality control and selection for grading procedures....

  14. Timber drying kilns using solar energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-15

    The objective of this project was to research the potential for solar kilns for drying timber in tropical countries (Guyana, Honduras and Belize) and produce a manual which will provide the knowledge necessary to build and operate a solar kiln. The main output of the project is the manual Solar Heated Timber Drying Kilns - a Manual on their Design and Operation. The manual covers:- background information; selection of construction materials; methods of kiln construction; kiln operation and maintenance procedure. The manual has been designed to provide the necessary knowledge and confidence to build and operate a solar kiln, and ultimately benefit from an improved product. Specifically, the manual will benefit small building construction units, furniture and joinery manufacturers and sawmill operators in developing and developed countries worldwide. (author)

  15. Timbered masonry for earthquake resistance in Europe

    OpenAIRE

    Dutu, A.; Gomes Ferreira, J.; Guerreiro, L.; Branco, F.; Gonçalves, A. M.

    2012-01-01

    Europe is a continent that is subject to significant seismic activity. Thus, the buildings’ seismic behaviour must be analysed, including not only the new structures, designed under more rigorous codes, but also older ones. This article examines a traditional type of building that uses timber frame/masonry, which is found in Portugal, Turkey, France, England, Greece, Romania, Italy, Spain, Germany and Scandinavia. Although the structures differ in terms of construction details, their struc...

  16. Timbered masonry for earthquake resistance in Europe

    OpenAIRE

    Dutu, A.; Gomes Ferreira, J.; Guerreiro, L.; Branco, F.; Gonçalves, A. M.

    2012-01-01

    Europe is a continent that is subject to significant seismic activity. Thus, the buildings’ seismic behaviour must be analysed, including not only the new structures, designed under more rigorous codes, but also older ones. This article examines a traditional type of building that uses timber frame/masonry, which is found in Portugal, Turkey, France, England, Greece, Romania, Italy, Spain, Germany and Scandinavia. Although the structures differ in terms of construction details, their str...

  17. Roof timber for fortifying mining works

    Energy Technology Data Exchange (ETDEWEB)

    Shirokov, A P; Kuntsevich, V IK; Pishchulin, V V; Seryi, A M; Volkov, P A

    1981-05-15

    The roof timber for fortifying mining works includes spring-mounted hinged elements made from a special rolled metal. In order to increase the carrying capacity of the support by increasing the deformation threshold, the springs are mounted by their expanded section to the lower side of the hinge; their ends are connected in turn to the elements made from the special rolled metal on both sides of the hinge.

  18. Timber joints under long-term loading

    DEFF Research Database (Denmark)

    Feldborg, T.; Johansen, M.

    This report describes tests and results from stiffness and strength testing of splice joints under long-term loading. During two years of loading the spicimens were exposed to cyclically changing relative humidity. After the loading period the specimens were short-term tested. The connectors were...... integral nail-plates and nailed steel and plywood gussets. The report is intended for designers and researchers in timber engineering....

  19. Michigan transportation facts & figures : public transportation

    Science.gov (United States)

    2002-08-16

    This on-line document is part of a series, Transportation Facts & Figures, by the Michigan Department of Transportation (MDOT). The Public Transit section of Transportation Facts & Figures cover such topics as intercity bus service, intercity rail se...

  20. Markets, Government Policy, and China’s Timber Supply

    Science.gov (United States)

    Han Zhang; Joseph Buongiorno

    2012-01-01

    China’s domestic demand and exports of wood products are rising rapidly compared to domestic supply. The determinants of timber supply in China were investigated with panel data from 25 provinces from 1999 to 2009. The results indicated that China’s timber supply had responded to both market forces, reflected by timber prices largely determined by world demand and...

  1. Ranking independent timber investments by alternative investment criteria

    Science.gov (United States)

    Thomas J. Mills; Gary E. Dixon

    1982-01-01

    A sample of 231 independent timber investments were ranked by internal rate of return, present net worth per acre and the benefit cost ratio—the last two discounted by 3, 6.4. 7.5. and 10 percent—to determine if the different criteria had a practical influence on timber investment ranking. The samples in this study were drawn from a group of timber investments...

  2. Study on the ventilation resistance of timbered airways (II)

    Energy Technology Data Exchange (ETDEWEB)

    Oba, S; Takiguchi, I

    1977-01-01

    From the results of a model study described in a previous paper (I), (Vol.23, No.4), a timber factor Kr is determined as a specific parameter for type of timber and as a function of spacing ratio d/e where d and e are the spacing and the height of sets respectively. A general formula for the determination of the friction coefficient of timbered airways is also proposed.

  3. MICHIGAN FARM DATABASE NEW DIRECTIONS FOR 1995

    OpenAIRE

    Nott, Sherrill B.; Hepp, Ralph E.

    1996-01-01

    The purpose of this paper is to provide financial and production performance data for Michigan farms in 1995. Separate sections report on the farm types of Cash Grain, Dairy, Fruit, General Crop, General Livestock, and Swine. This data can be used as a comparative data base for individual farmers to conduct a financial analysis of their own farm to identify strengths and weaknesses. This report can also provide information to those interested in the financial well being of Michigan agricultur...

  4. Seismic retrofitting of timber framed walls

    Directory of Open Access Journals (Sweden)

    Gonçalves, A. M.

    2014-12-01

    Full Text Available After the 1755 earthquake that destroyed Lisbon, an innovative anti-seismic structural system was developed consisting of a timber skeleton, that included timber framed masonry walls. After more than 250 years these structures need rehabilitation to face the present demands. The research presented in this paper aimed at experimentally characterizing the cyclic behaviour of timber framed walls reinforced with three different methods, namely: (i elastic-plastic dampers on diagonal braces, (ii reinforcement of timber connections with steel plates, (iii application of a reinforced rendering. The elastic-plastic damper showed an unsymmetrical behaviour and some difficulties to implement in practice. The strengthening with reinforced render led to an initial stiffness increase but showed a limited deformation capacity. The walls with reinforcing steel plates at the timber connections showed the best behaviour in terms of strength, stiffness and energy dissipation.Después del terremoto de 1755 que destruyó Lisboa, un sistema estructural antisísmico muy innovador fue desarrollado. El sistema consistió en un esqueleto de madera, que incluyó la construcción de muros de mampostería con un entramado de madera. Transcurridos más de 250 años, estas estructuras necesitan rehabilitación para poder hacer frente a los requisitos estructurales actuales. La investigación presentada en este trabajo tiene como objetivo caracterizar experimentalmente el comportamiento cíclico de los muros con entramado de madera reforzados con tres métodos diferentes: (i amortiguadores elasto-plásticos, (ii refuerzo de las conexiones de madera con placas de acero, (iii aplicación de un mortero reforzado. El amortiguador elasto-plástico mostró un comportamiento asimétrico y algunas dificultades para aplicarlo en la práctica. El refuerzo con mortero reforzado condujo a un aumento de la rigidez inicial, pero reveló una capacidad de deformación limitada. Los muros con

  5. Appropriateness of Probit-9 in development of quarantine treatments for timber and timber commodities

    Science.gov (United States)

    Marcus Schortemeyer; Ken Thomas; Robert A. Haack; Adnan Uzunovic; Kelli Hoover; Jack A. Simpson; Cheryl A. Grgurinovic

    2011-01-01

    Following the increasing international phasing out of methyl bromide for quarantine purposes, the development of alternative treatments for timber pests becomes imperative. The international accreditation of new quarantine treatments requires verification standards that give confidence in the effectiveness of a treatment. Probit-9 mortality is a standard for treatment...

  6. Tensile properties of machine strength graded timber for glued laminated timber

    DEFF Research Database (Denmark)

    Boström, Lars; Hoffmeyer, Preben; Solli, Kjell-Helge

    1999-01-01

    Special setting values based on tensile properties of Norway spruce are established for four different strength grading machines. The machines included are Computermatic, Cook-Bolinder, Ersson and Dynagrade.The study shows that the yield of timber to be used in tension, such as laminations...

  7. Assessment of demand and supply of timber products in Benue ...

    African Journals Online (AJOL)

    This study examines demand and supply of timber products in Benue State Nigeria with a view to highlighting the responsiveness of forest policy implementation. The scope of the study lies on plantation establishment targets and costs for 1999 to 2003, actual plantation establishment, timber supply and demand from ...

  8. Cattle and elk responses to intensive timber harvest.

    Science.gov (United States)

    Michael J. Wisdom; Bruce K. Johnson; Martin Vavra; Jennifer M. Boyd; Priscilla K. Coe; John G. Kie; Alan A. Ager; Norman J. Cimon

    2004-01-01

    Forested habitats for cattle and elk (Cervus elaphus) in the western United States have changed substantially in response to intensive timber management during the latter half of the 20th century. Consequently, the subject of how elk and other ungulates respond to timber management is a high-profile, long-standing issue that continues to be studied...

  9. Field investigations of historic covered timber bridges in the USA

    Science.gov (United States)

    James Wacker; Travis Hosteng; Brent. Phares

    2012-01-01

    The Federal Highway Administration is sponsoring a comprehensive research program on Historic Covered Timber Bridges in the USA. This national program's main purpose is to develop improved methods to preserve, rehabililate, and restore the timber bridge trusses that were developed during the early 1800s, and in many cases are still in service today. The overall...

  10. The Dendrochronological Dating of Timber Crossings in West Jutland, Denmark

    DEFF Research Database (Denmark)

    Daly, Aoife

    2006-01-01

    The dendrochronological analyses of a large number of timbers from two sites are described. Nybro causeway in west Jutland, Denmark, which was built in the 8th century AD, consists of numerous phases, identifiable due to the large number of dendrochronologically dated timbers, of which many had...

  11. Influence Of Density On The Durabilities Of Three Ghanaian Timbers ...

    African Journals Online (AJOL)

    Review of factors influencing wood durability shows although density varies depending on trunk position, its role appears controversial for many timber species. Thus, for the first time, the influence of density on the durability of three Ghanaian timbers (Nauclea diderrichii (de Wild.) Merr., Nesogordonia papaverifera (A. Chev ...

  12. Lateral testing of glued laminated timber tudor arch

    Science.gov (United States)

    Douglas R. Rammer; Philip Line

    2016-01-01

    Glued laminated timber Tudor arches have been in wide use in the United States since the 1930s, but detailed knowledge related to seismic design in modern U.S. building codes is lacking. FEMA P-695 (P-695) is a methodology to determine seismic performance factors for a seismic force resisting system. A limited P-695 study for glued laminated timber arch structures...

  13. Timber Management Opportunities for Nebraska 1983-1992

    Science.gov (United States)

    W. Brad Smith; Tom D. Wardle

    1984-01-01

    Reviews opportunities for treatment of timber stands in Nebraska for the decade 1983 - 1992. Under the assumptions and management guides specified, 52 percent of Nebraska''s commercial forest land would benefit from timber harvest or some other form of treatment during the decade.

  14. Projecting national forest inventories for the 2000 RPA timber assessment.

    Science.gov (United States)

    John R. Mills; Xiaoping. Zhou

    2003-01-01

    National forest inventories were projected in a study that was part of the 2000 USDA Forest Service Resource Planning Act (RPA) timber assessment. This paper includes an overview of the status and structure of timber inventory of the National Forest System and presents 50-year projections under several scenarios. To examine a range of possible outcomes, results are...

  15. Comparative durability of timber bridges in the USA

    Science.gov (United States)

    James P. Wacker; Brian K. Brashaw

    2017-01-01

    As engineers begin to utilize life-cycle-cost design approaches for timber bridges, there is a necessity for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This national study was...

  16. 125 Timber Dealers' Perception of their Knowledge of the Forest ...

    African Journals Online (AJOL)

    Nekky Umera

    Abstract. This study investigated timber dealers' knowledge of the forest law and regulations in Uyo Senatorial District. Five timber markets were selected through two-stage sampling. Data were collected from 238 traders in the selected markets using structured questionnaires and subjected to descriptive and inferential ...

  17. Whole tree transportation system for timber processing depots

    Science.gov (United States)

    John Lancaster; Tom Gallagher; Tim  McDonald; Dana Mitchell

    2016-01-01

    The growing demand for alternative energy has led those who are interested in producing sustainable energy from renewable timber to devise new concepts to satisfy those demands. The concept of timber processing depots, where whole stem trees will be delivered for future processing into wood products and high quality energy fuel, has led to the re-evaluation of our...

  18. Infill Panels and the tube connection in timber frames

    NARCIS (Netherlands)

    Leijten, A.J.M.; Jorissen, A.J.M.; Hoenderkamp, J.C.D.

    2012-01-01

    In recent years timber infill panels have been proposed for multi-story column-beam frame structures with the aim to substitute the stabilizing function of column-beam moment connections. The preliminary study reported in this paper considers a column-beam timber frame where stability is assured by

  19. Lateral Stiffness of Timber Frames with CLT Infill Panels

    NARCIS (Netherlands)

    Leijten, A.J.M.; Jorissen, A.J.M.; Hoenderkamp, J.C.D.; Haddad, Y.M.

    2011-01-01

    In recent years timber infill panels have been proposed for multi-story column-beam frame structures with the aim to substitute the stabilizing function of column-beam moment connections. The preliminary study reported in this paper considers a column-beam timber frame where stability is assured by

  20. Non-timber forest products and forest stewardship plans

    Science.gov (United States)

    Becky Barlow; Tanner Filyaw; Sarah W. Workman

    2015-01-01

    To many woodland owners “harvesting” typically means the removal of timber from forests. In recent years many landowners have become aware of the role non-timber forest products (NTFPs) can play in supplemental management strategies to produce income while preserving other forest qualities. NTFPs are a diverse group of craft, culinary, and medicinal products that have...

  1. Feasibility Investigation into Strengthening of Timber Bridge Stringers

    Science.gov (United States)

    2007-05-01

    12 Studies on timber members recycled from old timber structures...55 Figure 63. The load cell-hydraulic ram setup with spreader beam.....................................................56 Figure 64. The MTS...actuator and spreader beam................................................................................56 Figure 65. Effectiveness of a repair method

  2. Establishing MICHCARB, a geological carbon sequestration research and education center for Michigan, implemented through the Michigan Geological Repository for Research and Education, part of the Department of Geosciences at Western Michigan University

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, David A. [Western Michigan Univ., Kalamazoo MI (United States); Harrison, William B. [Western Michigan Univ., Kalamazoo MI (United States)

    2014-01-28

    P50 probability range for all formations using DOE-NETL, 2010, storage resource estimation methodology). Incremental oil production resulting from successful implementation of CO2/EOR for the highest potential Middle Paleozoic reef reservoirs (Silurian, Northern Niagaran Reef trend) in Michigan is estimated at 130 to over 200 MMBO (22-33 Mm3). In addition, between 200 and 400 Mmt of CO2 could be sequestered in the course of successful deployment of CO2/EOR in the northern reef trend’s largest depleted (primary production) oil fields (those that have produced in excess of 500,000 BO; 80,000 m3of oil). • Effecting technology transfer to members of industry and governmental agencies by establishing an Internet Website at which all data, reports and results are accessible; publishing results in relevant journals; conducting technology transfer workshops as part of our role as the Michigan Center of the Petroleum Technology Transfer Council or any successor organization.

  3. RILEM International Symposium on Materials and Joints in Timber Structures

    CERN Document Server

    Reinhardt, H-W; Garrecht, Harald

    2014-01-01

    This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended o...

  4. On several parameters of mechanized timbering for working faces

    Energy Technology Data Exchange (ETDEWEB)

    Klorik' yan, S Kh

    1979-08-01

    Opinion is expressed that the two basic parameters characterizing mechanical timbers, the specific force in ton-forces per square meter of the supported roof surface over the working area and the one-meter length of installed timbering, do not permit selection of the optimum type of timber for a roof of the corresponding class. Experience has demonstrated that the most precise parameter is specific strength of the timber in ton-forces per meter and the determined ratio of the strength of all posts in a section to spacing of the section along the longwall. Also an operating width not exceeding 0.4 meter should serve as a criterion for using timbers on unstable hanging walls. (In Russian)

  5. Durability of timber silencers at Wairakei geothermal steam field

    Energy Technology Data Exchange (ETDEWEB)

    Hedley, M E

    1979-02-01

    After early failures of reinforced concrete silencers and because of high costs of concrete-lined steel structures, preliminary tests were undertaken to assess the suitability of timber for silencer construction. Tests indicated that radiata pine treated with pentachlorophenol/oil or untreated red beech had most potential for timber silencer fabrication. One prototype silencer of each material was constructed and both were installed on operational bores in 1965. The red beech silencer had a service life of 4 years. The radiata pine silencer operated for 12/sup 1///sub 2/ years, although replacement had been recommended 1 year before this time expired. The performance of this silencer encouraged the general use of timber for silencer construction and further units were built. Procurement of satisfactory grades of timber has proved difficult and has limited silencer fabrication. Ways of improving timber supply, which require modification of silencer design, are discussed.

  6. Developing Representative Michigan Truck Configurations for Bridge Load Rating

    Science.gov (United States)

    2018-02-28

    The objective of this study is to recommend a rating process representative of Michigan load effects for legal and extended permit vehicles. For this study, high fidelity WIM data from 20 Michigan sites were analyzed. Using vehicle weight and configu...

  7. 27 CFR 9.79 - Lake Michigan Shore.

    Science.gov (United States)

    2010-04-01

    ... Michigan Shore. (a) Name. The name of the viticultural area described in this section is “Lake Michigan... southeast along the winding course of the Kalamazoo River for approximately 35 miles until it intersects the...

  8. County business patterns, 1997 : Michigan

    Science.gov (United States)

    1999-09-01

    County Business Patterns is an annual series that provides : subnational economic data by industry. The series is : useful for studying the economic activity of small areas; : analyzing economic changes over time; and as a benchmark : for statistical...

  9. County business patterns, 1996 : Michigan

    Science.gov (United States)

    1998-11-01

    County Business Patterns is an annual series that : provides subnational economic data by industry. The series : is useful for studying the economic activity of small areas; : analyzing economic changes over time; and as a benchmark : for statistical...

  10. Surveillance for work-related skull fractures in Michigan.

    Science.gov (United States)

    Kica, Joanna; Rosenman, Kenneth D

    2014-12-01

    The objective was to develop a multisource surveillance system for work-related skull fractures. Records on work-related skull fractures were obtained from Michigan's 134 hospitals, Michigan's Workers' Compensation Agency and death certificates. Cases from the three sources were matched to eliminate duplicates from more than one source. Workplaces where the most severe injuries occurred were referred to OSHA for an enforcement inspection. There were 318 work related skull fractures, not including facial fractures, between 2010 and 2012. In 2012, after the inclusion of facial fractures, 316 fractures were identified of which 218 (69%) were facial fractures. The Bureau of Labor Statistic's (BLS) 2012 estimate of skull fractures in Michigan, which includes facial fractures, was 170, which was 53.8% of those identified from our review of medical records. The inclusion of facial fractures in the surveillance system increased the percentage of women identified from 15.4% to 31.2%, decreased severity (hospitalization went from 48.7% to 10.6% and loss of consciousness went from 56.5% to 17.8%), decreased falls from 48.2% to 27.6%, and increased assaults from 5.0% to 20.2%, shifted the most common industry from construction (13.3%) to health care and social assistance (15.0%) and the highest incidence rate from males 65+ (6.8 per 100,000) to young men, 20-24 years (9.6 per 100,000). Workplace inspections resulted in 45 violations and $62,750 in penalties. The Michigan multisource surveillance system of workplace injuries had two major advantages over the existing national system: (a) workplace investigations were initiated hazards identified and safety changes implemented at the facilities where the injuries occurred; and (b) a more accurate count was derived, with 86% more work-related skull fractures identified than BLS's employer based estimate. A more comprehensive system to identify and target interventions for workplace injuries was implemented using hospital and

  11. Moisture Content Monitoring of a Timber Footbridge

    Directory of Open Access Journals (Sweden)

    Niclas Björngrim

    2016-03-01

    Full Text Available Construction of modern timber bridges has greatly increased during the last 20 years in Sweden. Wood as a construction material has several advantageous properties, e.g., it is renewable, sustainable, and aesthetically pleasing, but it is also susceptible to deterioration. To protect wood from deterioration and ensure the service life, the wood is either treated or somehow covered. This work evaluates a technology to monitor the moisture content in wood constructions. Monitoring the moisture content is important both to verify the constructive protection and for finding areas with elevated levels of moisture which might lead to a microbiological attack of the wood. In this work, a timber bridge was studied. The structure was equipped with six wireless sensors that measured the moisture content of the wood and the relative humidity every hour. Data for 744 days of the bridge are presented in this paper. Results show that the technology used to monitor the bridge generally works; however, there were issues due to communication problems and malfunction of sensors. This technology is promising for monitoring the state of wood constructions, but a more reliable sensor technology is warranted continuous remote monitoring of wood bridges over long periods of time.

  12. Boom, Bust and Beyond: Arts and Sustainability in Calumet, Michigan

    Directory of Open Access Journals (Sweden)

    Richelle Winkler

    2016-03-01

    Full Text Available Cycles of boom and bust plague mining communities around the globe, and decades after the bust the skeletons of shrunken cities remain. This article evaluates strategies for how former mining communities cope and strive for sustainability in the decades well beyond the bust, using a case study of Calumet, Michigan. In 1910, Calumet was at the center of the mining industry in the Upper Peninsula of Michigan, but in the century since its peak, mining employment steadily declined until the last mine closed in 1968, and the population declined by over 80%. This paper explores challenges, opportunities, and progress toward sustainability associated with arts-related development in this context. Methods are mixed, including observation, interviews, document review, a survey, and secondary data analysis. We follow Flora and Flora’s Community Capitals Framework to analyze progress toward sustainability. Despite key challenges associated with the shrunken city context (degraded tax base, overbuilt and aging infrastructure, diminished human capital, and a rather limited set of volunteers and political actors, we find the shrunken city also offers advantages for arts development, including low rents, less risk of gentrification, access to space, and political incentive. In Calumet, we see evidence of a spiraling up pattern toward social sustainability resulting from arts development; however impacts on environmental and economic sustainability are limited.

  13. Alternaria leaf spot in Michigan and fungicide sensitivity issues

    Science.gov (United States)

    Since 2010 there has been an increase in identification of Alternaria leaf spot on sugar beet in Michigan and other growing regions in the US and Canada. In 2016, the disease was severe enough to cause economic losses in the Michigan growing region. Michigan isolates from sugar beet were examined ...

  14. Spatial ecology of timber rattlesnakes on the hardwood ecosystem experiment: pre-treatment results

    Science.gov (United States)

    Brian J. MacGowan; Zachary J. Walker

    2013-01-01

    The timber rattlesnake (Crotalus horridus) is a species of conservation concern throughout much of its geographic range and may serve as a sentinel species in investigations of the effects of timber harvesting on forest reptiles. Our objective was to determine the effect of even-aged timber management regimes on timber rattlesnake home range and...

  15. Forest products industries of the southern Middle-Atlantic states, 1985 - 1986

    Science.gov (United States)

    Eric H. Wharton; Kevin Mullarkey; Kevin Mullarkey

    1993-01-01

    Evaluates regional timber output of Maryland, Delaware, and New Jersey. Results are based on a survey of primary processing mills located in these states and of mills in other states that used wood from the region. Contains statistics on industrial timber production and mill receipts and the production and final end use of manufacturing residues. Comparisons are made...

  16. The University of Michigan, Kellogg Building Expansion & Renovation, Ann Arbor, Michigan.

    Science.gov (United States)

    Design Cost Data, 2001

    2001-01-01

    Presents design, construction, and cost data for the University of Michigan's Kellogg Building expansion and renovation project. A list of project manufacturers and suppliers is provided along with four photographs and four floor plans. (GR)

  17. CONTEMPORARY CONSTRUCTIONS OF TIMBER PASSIVE HOUSES IN SLOVENIA

    Directory of Open Access Journals (Sweden)

    Manja Kitek Kuzman

    2013-12-01

    Full Text Available Energy efficiency is essential in the efforts to achieve a 20% reduction of primary power consumption by 2020. It is widely recognized that the potential of energy saving in buildings is large. Considering the tendencies of energy production and price, it is becoming urgent to reduce energy consumption in buildings. The choice of materials for a building with a high energy efficiency becomes much more important and strategies for reducing the use of primary energy for the production of materials and components becomes key. Renewable building materials should already be integrated into the early phases of building planning. The positive trend towards wooden construction is dictated by international guidelines, where a wooden building is an important starting point, not only for low-energy, but also lowemission building with exceptional health and safety aspects. In Europe, the most comprehensive and widely used is a concept of ultralow energy house, more precisely, the passive house concept. Most Slovenian buildings combine contemporary styling with a degree of energy efficiency that comes close to passive house standards. It is widely recognized that the Slovenian construction industry is relatively advanced in the field of low energy buildings. In the light of the growing importance of energy-efficient building methods, it could be said that timber passive house would play an increasingly important role in the future.

  18. System Reliability of Timber Structures with Ductile Behaviour

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Čizmar, Dean

    2011-01-01

    The present paper considers the evaluation of timber structures with the focus on robustness due to connection ductility. The robustness analysis is based on the structural reliability framework applied to a simplified mechanical system. The structural timber system is depicted as a parallel system....... An evaluation method of the ductile behaviour is introduced. For different ductile behaviours, the system reliability is estimated based on Monte Carlo simulation. A correlation between the strength of the structural elements is introduced. The results indicate that the reliability of a structural timber system...

  19. Robustness Issues for Design of Innovative Timber Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2013-01-01

    Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious conse-quences in case of failure. The present paper summaries issues with respect to robustness of timber structures. Two different...... large span timber structures are analyzed and based on these analyses the paper presents guidelines for the future development of innovative timber struc-tures which are robust with respect to design and execution errors, unforeseen degradation and other potential hazards....

  20. Moment Capacity of Timber Reinforced with Punched Metal Plate Fasteners

    DEFF Research Database (Denmark)

    Nielsen, Jacob; Ellegaard, Peter

    When designing timber trusses it is often found that the cross section controlling the dimensions of the top chord is located at a joint with a moment peak. However, the timber volume affected by the moment peak is rather limited and by embedding a punched metal plate in this area a reinforcement...... of the section is obtained, resulting in a more economic truss design. In order to develop design methods for sections with plate reinforcement, bending tests have been made. The timber is Swedish spruce of strength class K-18(S8) and K-24(S10) with a thickness of 45 mm. The punched metal plate is from Gang...

  1. Michigan's forests, 2004: statistics and quality assurance

    Science.gov (United States)

    Scott A. Pugh; Mark H. Hansen; Gary Brand; Ronald E. McRoberts

    2010-01-01

    The first annual inventory of Michigan's forests was completed in 2004 after 18,916 plots were selected and 10,355 forested plots were visited. This report includes detailed information on forest inventory methods, quality of estimates, and additional tables. An earlier publication presented analyses of the inventoried data (Pugh et al. 2009).

  2. Trypanosomes of Bufo americanus from northern Michigan.

    Science.gov (United States)

    Werner, J K; Davis, J S; Slaght, K S

    1988-10-01

    Two hundred one American toads (Bufo americanus) from northern Michigan were examined for blood trypanosomes. Three species, Trypanosoma bufophlebotomi, T. schmidti-like sp. and T. pseudopodia, had prevalences of 27, 16 and 1%, respectively. Cross experimental inoculations showed that T. bufophlebotomi from toads is not the same as T. ranarum found in frogs of the family Ranidae of this region.

  3. Private timberland owners of Michigan, 1994.

    Science.gov (United States)

    Earl C. Leatherberry; Neal P. Kingsley; Thomas W. Birch

    1998-01-01

    Identifies and profiles Michigan's private timberland owners. Estimates the number and distribution of private timberland owners by owner attitudes and objectives concerning forest ownership, management, and use. Provides 45 tables relating to owner and property characteristics for the state and its four survey units.

  4. Demographic characteristics and motivations of Michigan agritourists

    Science.gov (United States)

    Deborah Che; Ann Veeck; Gregory Veeck

    2007-01-01

    Michigan agricultural producers, faced with declining commodity prices, rising production costs, and increased global competition, have looked at agritourism as a way to save the farm as well as provide customers with personalized service; high-quality, fresh food; and farm, nature, and family experiences. While previous research on agritourism indicates that it taps...

  5. Renewable energy potential on brownfield sites: A case study of Michigan

    International Nuclear Information System (INIS)

    Adelaja, Soji; Shaw, Judy; Beyea, Wayne; Charles McKeown, J.D.

    2010-01-01

    Federal priorities are increasingly favoring the replacement of conventional sources of energy with renewable energy. With the potential for a federal Renewable Electricity Standard (RES) legislation, many states are seeking to intensify their renewable energy generation. The demand for wind, solar, geothermal and bio-fuels-based energy is likely to be rapidly expressed on the landscape. However, local zoning and NIMBYism constraints slow down the placement of renewable energy projects. One area where land constraints may be lower is brownfields; whose development is currently constrained by diminished housing, commercial, and industrial property demand. Brownfield sites have the potential for rapid renewable energy deployment if state and national interests in this area materialize. This study investigates the application of renewable energy production on brownfield sites using Michigan as a case study. Wind and solar resource maps of Michigan were overlaid with the brownfield locations based on estimates of brownfield land capacity. The total estimated energy potential available on Michigan's brownfield sites is 4320 megawatts (MW) of plate capacity for wind and 1535for solar, equating to 43% of Michigan's residential electricity consumption (using 30% capacity factor). Estimated economic impacts include over $15 billion in investments and 17,500 in construction and long-term jobs.

  6. Value Network of Amazon Non Timber Forest Products: A Mapping Tool to Support a Complex Network Strategic Planning

    OpenAIRE

    Straatmann , Jeferson; Gerolamo , Mateus ,; Carpinetti , Luiz

    2011-01-01

    Part 3: Value Chain for Enhancing Collaborative Networks; International audience; The Non Timber Forest Products (NTFP) value chains are viewed as an alternative for the forest conservation and for the improvement of life conditions of Traditional Communities. These products are part of different chemical, cosmetic, food and pharmaceutical industries, which are trying to improve the sustainability of their supply chains. For the improvement of inter-organizational NTFP network in the Amazon r...

  7. Implementation of new technologies in wood industry and their effect in wood products quality

    OpenAIRE

    ELVA ÇAUSHI; PANDELI MARKU

    2014-01-01

    There are about 300 companies producing furniture and about 250 small and medium enterprises (SME) producing sawn timber, which operate in the field of wood industry in Albania. This wood industry production is being challenged by the increasing demand in the domestic market, ranging from kitchen furniture to office and schools furniture, bedroom furniture, doors, windows, and saw timber in different dimensions. The production from the wood industry can fulfill about 80% of the domestic mark...

  8. epidemiology of eye diseases among timber workers in owerri

    African Journals Online (AJOL)

    LIVINGSTON

    pinguecula and uveitis, each, accounting for 39.52%, 31.10%, 12.53%, 7.34% and 2.16% respectively ... Timber workers, eye diseases, work environment, prevalence, environmental pollutants. ... there was no interested family member to take.

  9. Profitability of Clerodendrum volubile (eweta) , a non-timber forest ...

    African Journals Online (AJOL)

    Timber Forest product, in Okitipupa, Ondo State Nigeria. Purposive and simple random sampling techniques were used in the selection of markets and respondents. The sample size was 60 and instrument of data collection was structured and ...

  10. Community Based Ecological Monitoring of Non Timber Forest ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Community Based Ecological Monitoring of Non Timber Forest Products in the Nilgiri ... This project will allow Keystone Foundation to design, implement and test a ... traders, forest department officials and other stakeholders in the process.

  11. Creosote treated timber in the Alaskan marine environment : Volume I.

    Science.gov (United States)

    2010-02-01

    ADOT&PF is responsible for many structures that incorporate wood pilings and other timber in Alaska waters. Most are treated with preservative to inhibit marine borers : that will quickly destroy unprotected wood. Creosote is generally the most econo...

  12. Minimizing corrosive action in timber bridges treated with waterborne preservatives

    Science.gov (United States)

    Samuel L. Zelinka; Douglas R. Rammer; James P. Wacker

    2007-01-01

    This work will briefly review published literature and current research activities on the corrosion of metals in contact with wood treated with waterborne alternatives to CCA. In addition, recommendations to minimize these corrosive effects in timber bridges will be discussed.

  13. Impact of timber production and transport costs on stand management

    Science.gov (United States)

    Chris B. LeDoux; Chris B. LeDoux

    1988-01-01

    Evaluates the impact of cable logging technology, transportation network standards, and transport vehicles on stand management. Managers can use results to understand the impact of timber production costs on eastern hardwood management.

  14. Compression strength perpendicular to grain of structural timber and glulam

    DEFF Research Database (Denmark)

    Damkilde, Lars; Hoffmeyer, Preben; Pedersen, Torben N.

    1998-01-01

    The characteristic strength values for compression perpendicular to grain as they appear in EN 338 (structural timber) and EN 1194 (glulam) are currently up for discussion. The present paper provides experimental results based on EN 1193 that may assist in the correct assignment of such strength...... values. The dominant failure mode of glulam specimens is shown to be fundamentally different from that of structural timber specimens. Glulam specimens often show tension perpendicular to grain failure before the compression strength value is reached. Such failure mode is not seen for structural timber....... Nonetheless test results show that the levels of characteristic compression strength perpendicular to grain are of the same order for structural timber and glulam. The values are slightly lower than those appearing in EN 1194 and less than half of those appearing in EN 338. The paper presents a numerical...

  15. Modeling the Effects of Knots in Structural Timber

    DEFF Research Database (Denmark)

    Foley, Christina

    The main purpose of the pursued research presented in this thesis is to increase knowledge of the effects of knots in structural timber so that characteristics of weaker timber may be determined and applied to improve current grading techniques. In the process, a three-dimensional fiber paradigm...... are given to Shigo's knot formation theory, and thus predicts two separate patterns of fiber direction within annual growth layers related to live knots. In order to determine the possibility to practically and non destructively predict local material directions in structural timber with the three...... was established, which describes variations of radial growth direction and fiber orientation related to knots in timber. The adaptability of the paradigm allows practically any softwood knot and its effect on surrounding wood material to be modeled with an accuracy that is limited only by input data. The knot...

  16. Probabilistic representation of duration of load effects in timber structures

    DEFF Research Database (Denmark)

    Svensson, Staffan

    2011-01-01

    Reliability analysis of structures for the purpose of code calibration or reliability verification of specific structures requires that the relevant failure modes are represented and analyzed. For structural timber, sustaining a life load, two failure cases for each failure mode have......-based design of timber structures in terms of a modification factor View the MathML source which is multiplied on the short-term resistance of the timber material. The scenario of a beam subject to office space life loads is analyzed and the modification factor View the MathML source is calibrated by using...... to be considered. These two cases are maximum load level exceeding load-carrying capacity and damage accumulation (caused by the load and its duration) leading to failure. The effect of both load intensity and load duration on the capacity of timber has been an area of large interest over the last decades...

  17. 26 CFR 1.611-3 - Rules applicable to timber.

    Science.gov (United States)

    2010-04-01

    ..., the total quantity under consideration, and the location of the timber in question with reference to... or shares, royalties and rentals, valuation for local or State taxation, partnership accountings...

  18. structural reliability of the nigerian grown abura timber bridge beam

    African Journals Online (AJOL)

    ENGR. J. I. AGUWA

    2013-07-02

    Jul 2, 2013 ... Structural analysis and deterministic design of a timber bridge beam using the Nigerian ... practice especially when it involves naturally occuring materials .... the beam due to distributed loads is; from [15]. (4). It is assumed that ...

  19. Influence of Compression Stresses on Timber Potentials of ...

    African Journals Online (AJOL)

    Eucalyptus camaldulensis Denhn in North-Western Nigeria. *1A. ... further research should be carried out on wood in service to study the peculiarities of timber behaviour under actual .... eastern Nigeria, Neem (Azadirachta indica) was found.

  20. Evaluating carbon storage, timber harvest, and habitat possibilities for a Western Cascades (USA) forest landscape.

    Science.gov (United States)

    Kline, Jeffrey D; Harmon, Mark E; Spies, Thomas A; Morzillo, Anita T; Pabst, Robert J; McComb, Brenda C; Schnekenburger, Frank; Olsen, Keith A; Csuti, Blair; Vogeler, Jody C

    2016-10-01

    Forest policymakers and managers have long sought ways to evaluate the capability of forest landscapes to jointly produce timber, habitat, and other ecosystem services in response to forest management. Currently, carbon is of particular interest as policies for increasing carbon storage on federal lands are being proposed. However, a challenge in joint production analysis of forest management is adequately representing ecological conditions and processes that influence joint production relationships. We used simulation models of vegetation structure, forest sector carbon, and potential wildlife habitat to characterize landscape-level joint production possibilities for carbon storage, timber harvest, and habitat for seven wildlife species across a range of forest management regimes. We sought to (1) characterize the general relationships of production possibilities for combinations of carbon storage, timber, and habitat, and (2) identify management variables that most influence joint production relationships. Our 160 000-ha study landscape featured environmental conditions typical of forests in the Western Cascade Mountains of Oregon (USA). Our results indicate that managing forests for carbon storage involves trade-offs among timber harvest and habitat for focal wildlife species, depending on the disturbance interval and utilization intensity followed. Joint production possibilities for wildlife species varied in shape, ranging from competitive to complementary to compound, reflecting niche breadth and habitat component needs of species examined. Managing Pacific Northwest forests to store forest sector carbon can be roughly complementary with habitat for Northern Spotted Owl, Olive-sided Flycatcher, and red tree vole. However, managing forests to increase carbon storage potentially can be competitive with timber production and habitat for Pacific marten, Pileated Woodpecker, and Western Bluebird, depending on the disturbance interval and harvest intensity chosen

  1. Timber resource statistics for the Yakataga inventory unit, Alaska, 1976.

    Science.gov (United States)

    Willem W.S. van Hees

    1985-01-01

    Statistics on forest area, total gross and net timber volumes, and annual net growth and mortality are presented from the 1976 timber inventory of the Yakataga unit, Alaska. Timberland area is estimated at 209.3 thousand acres (84.7 thousand ha), net growing stock volume at 917.1 million cubic feet (26.0 million m3), and annual net growth and...

  2. Dowelled structural connections in laminated bamboo and timber

    OpenAIRE

    Reynolds, Thomas Peter; Sharma, Bhavna; Harries, Kent; Ramage, Michael Hector

    2015-01-01

    Structural sections of laminated bamboo can be connected using methods common in timber engineering, however the different material properties of timber and laminated bamboo suggest that the behaviour of connections in the two materials would not be the same. This study investigates the dowelled connection, in which a connector is passed through a hole in the material, and load is resisted by shear in the connector and embedment into the surrounding material. Steel dowels were used in a conne...

  3. T-section glulam timber bridge modules : modeling and performance

    Science.gov (United States)

    Paul A. Morgan; Steven E. Taylor; Michael A. Ritter; John M. Franklin

    1999-01-01

    This paper describes the design, modeling, and testing of two portable timber bridges, each consisting of two noninterconnected longitudinal glued-laminated timber (glulam) deck panels 1.8 m (6 ft) wide. One bridge is 12.2 m (40 ft) long while the other bridge is 10.7 m (35 ft) long. The deck panels are fabricated in a unique double-tee cross section. The bridges...

  4. Reliability based Robustness of Timber Structures through NDT Data Updating

    DEFF Research Database (Denmark)

    Sousa, Hélder S.; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    2011-01-01

    This work presents a framework for reliability-based assessment of timber structures / members using data gathered from non-destructive test results. These results are used for modeling an update of the mechanical characteristics of timber, using Bayesian methods. Results gathered from ultrasound...... of the structure, thus, being possible to evaluate reliability based in time dependent factors, as well to categorize that structure in terms of robustness. For exemplification of the underlined concepts, three different types of structures are studied....

  5. Parametric Evaluation of Racking Performance of Platform Timber Framed Walls

    OpenAIRE

    Dhonju, R..; D’Amico, B..; Kermani, A..; Porteous, J..; Zhang, B..

    2017-01-01

    This paper provides a quantitative assessment of the racking performance of partially anchored timber framed walls, based on experimental tests. A total of 17 timber framed wall specimens, constructed from a combination of materials under different load configurations, were tested. The experimental study was designed toexamine the influence of a range of geometrical parameters, such as fastener size and spacings, wall length, arrangement of studs and horizontal members, as well as the effect ...

  6. Section of mechanized timbering of an installation layer

    Energy Technology Data Exchange (ETDEWEB)

    Gur' yev, D K; Tomashevskiy, L P; Vorotnyak, M V

    1980-07-28

    A section of mechanized timbering of an installation layer is suggested which includes roof timber, base with cantilever, hydrostand, safety guard which consists of a lower and upper shield, where the lower shield in the lower part has a roll whose upper part is hinged to the cantilever base, and the upper shield is hinged to the roof timber. Its lower part is connected by a linkage to the cantilever of the base. There is also a correcting device, tie rod and holder with rolled material. In order to guarantee stability of the timbering section during work on thick beds and adaptability of the roof timber to the roofing of the bed, the connection between the cantilever and the lower part of the upper shield is made from a longitudinal slit on the cantilever and slide bar placed in it. It is attached by a pin to the lower part of the upper shield. In this case the tie bar is hinged to the linkage and by means of the slide bar to the roof timber, while the correcting device is made of an extension-type support with level which contacts with the wedge and the tightening element installed on the cantilever of the base.

  7. Evaluating the economic and noneconomic impacts of the veterinary medical profession in Michigan.

    Science.gov (United States)

    Lloyd, J W; Dartt, B A

    2000-01-01

    This study reaffirms the diversity and breadth of the veterinary profession. As it turns out, some of the furthest-reaching impacts of the veterinary medical profession were largely non-quantifiable. The veterinary medical profession had a substantial direct economic impact in Michigan during 1995. The total economic contribution of the veterinary medical profession to Michigan during 1995 that was attributable to expenditures on salaries, supplies, services, and their multiplier effect was approximately $500 million. In addition, the profession was associated with nearly 8,500 jobs (combined professional and lay positions). The veterinary medical profession was also considered to have an impact on the prosperity of the live-stock, equine, and pet food industries in Michigan, even though the economic contribution in these areas could not be directly quantified. Economic well-being of the individual businesses in these industries is directly related to the health and productivity of the associated animals, and improvements in output or productivity that accompany improved animal health likely carry substantial economic benefits in these sectors. In addition, progressive animal health management provides a crucial method of managing risk in the animal industries. Similarly, although the economic contribution could not be quantified, the veterinary medical profession enhances the safety and quality of human food through research, regulation, and quality assurance programs in livestock production, minimizing the risk of drug residues and microbial contamination. During 1995, approximately 5.3 million Michigan residents benefitted from the physical, psychological, and emotional well-being that accompanies companion animal ownership. By preserving the health and longevity of companion animals, veterinarians sustain and enhance these aspects of the human-animal bond. As Michigan enters a new century, it is likely that the state's veterinary medical profession will

  8. Timbered masonry for earthquake resistance in Europe

    Directory of Open Access Journals (Sweden)

    Dutu, A.

    2012-12-01

    Full Text Available Europe is a continent that is subject to significant seismic activity. Thus, the buildings’ seismic behaviour must be analysed, including not only the new structures, designed under more rigorous codes, but also older ones. This article examines a traditional type of building that uses timber frame/masonry, which is found in Portugal, Turkey, France, England, Greece, Romania, Italy, Spain, Germany and Scandinavia. Although the structures differ in terms of construction details, their structural system is basically the same: the wooden structural system bears mainly the horizontal loads while the masonry supports the gravity loads. The study includes a brief report on the seismicity of each country where this traditional type of building made of timbered framed masonry is found, together with the description of these buildings’ constructive systems.

    Europa es un continente que está sujeto a una significativa actividad sísmica. Por esta razón, se debe analizar el comportamiento sísmico, no sólo de las nuevas estructuras, diseñadas sobre la base de códigos más exigentes, sino también de los diversos tipos de estructuras antiguas. En este artículo se analizan las estructuras constituidas por mampostería y madera, que se pueden encontrar en Portugal, Turquía, Francia, Inglaterra, Grecia, Rumania, Italia, España, Alemania y Escandinavia. Aunque estas estructuras presentan diferencias en cuanto a detalles constructivos, su sistema estructural es idéntico: el sistema estructural de madera absorbe principalmente las cargas horizontales, mientras que la mampostería garantiza la resistencia a la acción de la gravedad. El estudio presentado incluye un breve informe acerca de la sismicidad de los países en que existe el tipo de construcción mencionado, conjuntamente con la descripción de los sistemas constructivos específicos de cada país.

  9. Mapping Lake Michigan Fish Catch Data

    OpenAIRE

    Wodd, Jacob; Doucette, Jarrod; Höök, Tomas O.

    2014-01-01

    The only Great Lake completely contained in the U.S., Lake Michigan offers an abundance of recreational fishing. This project takes 20 years’ worth of salmonid fish catch data, and uses GIS to organize and visually represent the data in a way that is meaningful and helpful to local fisherman and researchers. Species represented included Brown Trout, Lake Trout, Rainbow Trout, Chinook Salmon, and Coho Salmon. The species are organized by both decadal and yearly spans, as well as catch per t...

  10. Biodiversity Conservation in Southeast Asian Timber Concessions: a Critical Evaluation of Policy Mechanisms and Guidelines

    Directory of Open Access Journals (Sweden)

    Rona A. Dennis

    2008-06-01

    Full Text Available Tropical deforestation is leading to a loss of economically productive timber concessions, as well as areas with important environmental or socio-cultural values. To counteract this threat in Southeast Asia, sustainable forest management (SFM practices are becoming increasingly important. We assess the tools and guidelines that have been developed to promote SFM and the progress that has been made in Southeast Asia toward better logging practices. We specifically focus on practices relevant to biodiversity issues. Various regional or national mechanisms now inform governments and the timber industry about methods to reduce the impact of production forestry on wildlife and the forest environment. However, so many guidelines have been produced that it has become difficult to judge which ones are most relevant. In addition, most guidelines are phrased in general terms and lack specific recommendations targeted to local conditions. These might be reasons for the generally slow adoption of SFM practices in the region, with only a few countries having incorporated the guidelines into national legislation. Malaysia, Indonesia, and Laos are among the frontrunners in this process. Overall there is progress, especially in the application of certification programs, the planning and management of high conservation value forests, the regulation and control of hunting, and silvicultural management. To reduce further forest loss, there is a need to accelerate the implementation of good forest management practices. We recommend specific roles for governments, the forestry industry, and nongovernmental organizations in further promoting the implementation of SFM practices for biodiversity conservation.

  11. Plutonium and americium in Lake Michigan sediments

    International Nuclear Information System (INIS)

    Edgington, D.N.; Alberts, J.J.; Wahlgren, M.A.; Karttunen, J.O.; Reeve, C.A.

    1975-01-01

    The vertical distributions of 239 , 240 Pu, 238 Pu, and 137 Cs have been measured in sediment cores taken from Lake Michigan. Sections from a limited number of cores have been analyzed for 241 Am. In addition, grab samples from ten locations in the southern basin of the lake have been analyzed for phase distribution of 239 , 240 Pu using a sequential extraction technique. The results indicate that the 239 , 240 Pu, 238 Pu, and 137 Cs from weapons testing, and the 241 Am formed in situ are concentrated in the sediments. A comparison of the total deposition of 239 , 240 Pu and 137 Cs indicates that 137 Cs may be valuable as a monitor for 239 , 240 Pu deposition in the sediments. Values of the 238 Pu/ 239 , 240 Pu ratio are in agreement with values reported in Lake Ontario sediments (and Lake Michigan plankton) and show little variation with depth. 241 Am data support the concept of in situ production with little preferential mobility after formation. Studies of sedimentary phase distributions show that 239 , 240 Pu is associated with hydrous oxide phases which are chemically stable under the prevailing conditions in lake sediments. Since Lake Michigan sediments remain aerobic, relatively little 239 , 240 Pu is available for chemical mobilization from the hydrous oxide or organic phases present in the sediments

  12. Synthetic musk fragrances in Lake Michigan.

    Science.gov (United States)

    Peck, Aaron M; Hornbuckle, Keri C

    2004-01-15

    Synthetic musk fragrances are added to a wide variety of personal care and household products and are present in treated wastewater effluent. Here we report for the first time ambient air and water measurements of six polycyclic musks (AHTN, HHCB, ATII, ADBI, AHMI, and DPMI) and two nitro musks (musk xylene and musk ketone) in North America. The compounds were measured in the air and water of Lake Michigan and in the air of urban Milwaukee, WI. All of the compounds except DPMI were detected. HHCB and AHTN were found in the highest concentrations in all samples. Airborne concentrations of HHCB and AHTN average 4.6 and 2.9 ng/m3, respectively, in Milwaukee and 1.1 and 0.49 ng/m3 over the lake. The average water concentration of HHCB and AHTN in Lake Michigan was 4.7 and 1.0 ng/L, respectively. A lake-wide annual mass budget shows that wastewater treatment plant discharge is the major source (3470 kg/yr) of the synthetic musks while atmospheric deposition contributes less than 1%. Volatilization and outflow through the Straits of Mackinac are major loss mechanisms (2085 and 516 kg/yr for volatilization and outflow, respectively). Concentrations of HHCB are about one-half the predicted steady-state water concentrations in Lake Michigan.

  13. Small-scale non-industrial private forest ownership in the United States: rationale and implications for forest management

    Science.gov (United States)

    Yaoqi Zhang; Daowei Zhang; John Schelhas

    2005-01-01

    The transaction cost approach is used to explain why small non-industrial private forest (NIPF) ownerships are increasing in the U.S. We argue that the number of small NIPF owners have increased because: 1) a significant amount of forestland is no longer used economically if primarily for timber production, but rather for non-timber forest products and environmental...

  14. The presence and near-shore transport of human fecal pollution in Lake Michigan beaches

    Science.gov (United States)

    Molloy, S.L.; Liu, L.B.; Phanikumar, M.S.; Jenkins, T.M.; Wong, M.V.; Rose, J.B.; Whitman, R.L.; Shively, D.A.; Nevers, M.B.

    2005-01-01

    The Great Lakes are a source of water for municipal, agricultural and industrial use, and support significant recreation, commercial and sport fishing industries. Every year millions of people visit the 500 plus recreational beaches in the Great Lakes. An increasing public health risk has been suggested with increased evidence of fecal contamination at the shoreline. To investigate the transport and fate of fecal pollution at Great Lakes beaches and the health risk associated with swimming at these beaches, the near-shore waters of Mt Baldy Beach, Lake Michigan and Trail Creek, a tributary discharging into the lake were examined for fecal pollution indicators. A model of surf zone hydrodynamics coupled with a transport model with first-order inactivation of pollutant was used to understand the relative importance of different processes operating in the surf zone (e.g. physical versus biological processes). The Enterococcus human fecal pollution marker, which targets a putative virulence factor, the enterococcal surface protein (esp) in Enterococcus faecium, was detected in 2/28 samples (7%) from the tributaries draining into Lake Michigan and in 6/30 samples (20%) from Lake Michigan beaches. Preliminary analysis suggests that the majority of fecal indicator bactateria variation and water quality changes at the beaches can be explained by inputs from the influential stream and hydrometeorological conditions. Using modeling methods to predict impaired water quality may help reduce potential health threats to recreational visitors.

  15. Dynamics of Timber Market Integration in Sweden

    Directory of Open Access Journals (Sweden)

    Vishal Chandr Jaunky

    2015-12-01

    Full Text Available This paper addresses the performance of the timber markets (Scots pine, Pinus silvestris L. and Norway spruce, Picea abies (L. Karst. by evaluating the order of market integration in three Swedish regions (Central, Northern, and Southern. Quarterly data of delivery prices are employed over the period 1999Q1–2012Q4. Various unit root and cointegration tests have been computed. The results indicate that the variables are integrated of first order and co-integrated, especially after controlling for structural breaks. This supports the law-of-one-price hypothesis (LOP. However, the effects of structural shocks on forestry are arguably significant and these are controlled for while performing a vector error-correction mechanism (VECM-based Granger-causality test. Bi-directional causality between the Northern and central markets is uncovered in the short-run. In the long-run, a similar causal effect is detected between Northern and Southern markets while the central market emerges as the price leader. Further investigation is carried out using variance decompositions and impulse response functions and these approaches also tend to confirm the existence of a single market well, as price interdependence between markets.

  16. Fast-Food Consumption and Obesity Among Michigan Adults

    OpenAIRE

    Anderson, Beth; Lyon-Callo, Sarah; Fussman, Christopher; Imes, Gwendoline; Rafferty, Ann P.

    2011-01-01

    Introduction Consumption of meals eaten away from home, especially from fast-food restaurants, has increased in the United States since the 1970s. The main objective of this study was to examine the frequency and characteristics of fast-food consumption among adults in Michigan and obesity prevalence. Methods We analyzed data from 12 questions about fast-food consumption that were included on the 2005 Michigan Behavioral Risk Factor Survey, a population-based telephone survey of Michigan adul...

  17. Positron Emission Tomography-Scanner at Children`s Hospital of Michigan at Detroit, Michigan

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    The Department of Energy has prepared an environmental assessment (EA), DOE/EA-0795, to support the DOE decision to provide a grant of $7,953,600 to be used in support of a proposed Positron Emission Tomography Scanner at Children`s Hospital of Michigan at Detroit, Michigan. Based upon the analysis in the EA, DOE has determined that the proposed action is not a major Federal action significantly affected the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA). Therefore, the preparation of an Environmental Impact Statement is not required and DOE is issuing this Finding of No Significant Impact (FONSI).

  18. Positron Emission Tomography-Scanner at Children's Hospital of Michigan at Detroit, Michigan

    International Nuclear Information System (INIS)

    1992-01-01

    The Department of Energy has prepared an environmental assessment (EA), DOE/EA-0795, to support the DOE decision to provide a grant of $7,953,600 to be used in support of a proposed Positron Emission Tomography Scanner at Children's Hospital of Michigan at Detroit, Michigan. Based upon the analysis in the EA, DOE has determined that the proposed action is not a major Federal action significantly affected the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA). Therefore, the preparation of an Environmental Impact Statement is not required and DOE is issuing this Finding of No Significant Impact (FONSI)

  19. 76 FR 36152 - Notice of Inventory Completion: Western Michigan University, Anthropology Department, Kalamazoo...

    Science.gov (United States)

    2011-06-21

    ...: Western Michigan University, Anthropology Department, Kalamazoo, MI; Correction AGENCY: National Park... human remains and associated funerary objects. Western Michigan University, Department of Anthropology... may contact the Western Michigan University, Department of Anthropology. Disposition of the human...

  20. 76 FR 28077 - Notice of Inventory Completion: Western Michigan University, Anthropology Department, Kalamazoo, MI

    Science.gov (United States)

    2011-05-13

    ...: Western Michigan University, Anthropology Department, Kalamazoo, MI AGENCY: National Park Service, Interior. ACTION: Notice. SUMMARY: Western Michigan University, Department of Anthropology, has completed... contact the Western Michigan University, Department of Anthropology. Disposition of the human remains to...

  1. 76 FR 36149 - Notice of Inventory Completion: Western Michigan University, Department of Anthropology...

    Science.gov (United States)

    2011-06-21

    ...: Western Michigan University, Department of Anthropology, Kalamazoo, MI AGENCY: National Park Service, Interior. ACTION: Notice. SUMMARY: Western Michigan University, Department of Anthropology, has completed... contact the Western Michigan University, Department of Anthropology. Disposition of the human remains and...

  2. Equal Educational Opportunity: Hearings Before the Select Committee on Equal Educational Opportunity of the United States Senate, Ninety-Second Congress, First Session on Equal Educational Opportunity. Part 19A--Equal Educational Opportunity in Michigan. Hearings Held Washington, D.C., Oct 26, and Nov 1-2, 1971.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Select Committee on Equal Educational Opportunity.

    Testimony was presented at these hearings by the following witnesses: Ronald Edmonds, assistant superintendent, School and Community Affairs, Michigan Department of Education; Dr. Daniel H. Kruger, professor, School of Labor and Industrial Relations, Michigan State University; Robert McKerr, associate superintendent, Business and Finance, Michigan…

  3. Supply Chain Planning for a Timber Harvesting Plus Sale Tender

    Directory of Open Access Journals (Sweden)

    Josef Holoubek

    2015-01-01

    Full Text Available Since 2010, the Czech State Forest Enterprise has been inviting timber-harvesting tenders while insisting on the forestry company purchasing the timber from the felled trees as well. To win, a tender must offer the greatest difference between the price of the timber purchased and the cost of the operations. Thus, the forest companies are now facing new problem: apart from minimizing the logging costs they are searching for a cross-cutting and mill-distribution strategy that maximizes the selling price of the harvested timber. The optimization model devised by the present paper provides support for finding an optimal timber selling strategy and, as an important contribution, include a detailed plan for cross-cutting the logs and assign them to the particular customers. We keep the support accessible via common office software and the cross-cutting and customer-assigning problem is formulated as a linear programming model for EXCEL, a particular real-world problem is solved and, using expert comparison, the model appears to provide very good results.

  4. 36 CFR 13.485 - Subsistence use of timber and plant material.

    Science.gov (United States)

    2010-07-01

    ... cutting of standing timber by local rural residents for appropriate subsistence uses, such as firewood or... materials for subsistence uses, and the noncommerical gathering of dead or downed timber for firewood, shall...

  5. Protection of timber constructions by using electro osmotic pulsing technology (PLEOT)

    OpenAIRE

    Treu, A.; Larnoy, E.; Ribeiro Nunes, L. M.; Duarte, S.; Halvorsen, H.

    2011-01-01

    Timber constructions are often built in combination with other materials such as concrete. These materials can influence the timber construction. Moist concrete can e.g. lead to development of molds which creates an unhealthy living area for people. Furthermore, moisture in wood buildings can negatively affect the wood material, which can lead to negative biological activity in timber and possible reduction of strength properties of timber constructions. The present paper introduces ...

  6. Comparative analysis of discharges into Lake Michigan, Phase I - Southern Lake Michigan.

    Energy Technology Data Exchange (ETDEWEB)

    Veil, J. A.; Elcock, D.; Gasper, J. R.; Environmental Science Division

    2008-06-30

    BP Products North America Inc. (BP) owns and operates a petroleum refinery located on approximately 1,700 acres in Whiting, East Chicago, and Hammond, Indiana, near the southern tip of Lake Michigan. BP provided funding to Purdue University-Calumet Water Institute (Purdue) and Argonne National Laboratory (Argonne) to conduct studies related to wastewater treatment and discharges. Purdue and Argonne are working jointly to identify and characterize technologies that BP could use to meet the previous discharge permit limits for total suspended solids (TSS) and ammonia after refinery modernization. In addition to the technology characterization work, Argonne conducted a separate project task, which is the subject of this report. In Phase I of a two-part study, Argonne estimated the current levels of discharge to southern Lake Michigan from significant point and nonpoint sources in Illinois, Indiana, and portions of Michigan. The study does not consider all of the chemicals that are discharged. Rather, it is narrowly focused on a selected group of pollutants, referred to as the 'target pollutants'. These include: TSS, ammonia, total and hexavalent chromium, mercury, vanadium, and selenium. In Phase II of the study, Argonne will expand the analysis to cover the entire Lake Michigan drainage basin.

  7. Project '80, Rural Michigan Now and in 1980; Michigan's Outdoor Recreation and Tourism.

    Science.gov (United States)

    Milstein, David N.

    Michigan is widely recognized as a traditional leader in outdoor recreation and tourism. Its location and resources provide many comparative advantages toward attracting visitors. State spending for outdoor recreation amounted to $95 million over the decade ending in 1960. State and Federal policies and programs are likely to emphasize outdoor…

  8. A Probabilistic Approach for Robustness Evaluation of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall...... to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obatined. Therefore the structure can be considered......A probabilistic based robustness analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...

  9. Reliability Analysis of Timber Structures through NDT Data Upgrading

    DEFF Research Database (Denmark)

    Sousa, Hélder; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    The first part of this document presents, in chapter 2, a description of timber characteristics and common used NDT and MDT for timber elements. Stochastic models for timber properties and damage accumulation models are also referred. According to timber’s properties a framework is proposed...... for a safety reassessment procedure. For that purpose a theoretical background for structural reliability assessment including probabilistic concepts for structural systems and stochastic models are given in chapter 3. System models, both series and parallel systems, are presented as well as methods...... for robustness are dealt in chapter 5. The second part of this document begins in chapter 6, where a practical application of the premise definitions and methodologies is given through the implementation of upgraded models with NDT and MDT data. Structural life-cycle is, therefore, assessed and reliability...

  10. Multi-Scalar Modelling for Free-form Timber Structures

    DEFF Research Database (Denmark)

    Poinet, Paul; Nicholas, Paul; Tamke, Martin

    2016-01-01

    .The research explores the design probe of free-form structures composed of glue-laminated timber beams and looks at the different types of data that need to be shared among each discipline and across multiple scales from which different levels of resolution can be defined. A particular focus lies...... in the segmentation strategy of glue-laminated timber structures that depend on structural requirements and the different types of constraints related to fabrication, transportation and assembly. Where current working practices decouple segmentation processes within a discrete digital workflow, this research aims...... and techniques as a means to work within a continuous design environment in which an abstract network of timber beams is iteratively updated through geometrical and structural optimizations at different levels of resolution....

  11. Risks, Information and Short-Run Timber Supply

    Directory of Open Access Journals (Sweden)

    Francesca Rinaldi

    2013-12-01

    Full Text Available Efforts to increase wood mobilization have highlighted the need to appraise drivers of short-run timber supply. The current study aims to shed further light on harvesting decisions of private forest owners, by investigating optimal harvesting under uncertainty, when timber revenues are invested on financial markets and uncertainty is mitigated by news releases. By distinguishing between aggregate economic risk and sector specific risks, the model studies in great detail optimal harvesting-investment decisions, with particular emphasis on the non-trivial transmission of risk on optimal harvesting, and on the way private forest owners react to news and information. The analysis of the role played by information in harvesting decisions is a novelty in forest economic theory. The presented model is highly relevant from a policy—information is a commonly used forest policy instrument—as well as a practical perspective, since the mechanism of risk transmission is at the basis of timber pricing.

  12. Reconnaissance of the Manistee River, a cold-water river in the northwestern part of Michigan's Southern Peninsula

    Science.gov (United States)

    Hendrickson, G.E.; Doonan, C.J.

    1972-01-01

    The cold-water streams of the northern states provide unique recreational values to the American people (wilderness or semi-wilderness atmosphere, fast-water canoeing, trout fishing), but expanding recreational needs must be balanced against the growing demand of water for public and industrial supplies, irrigation, and dilution of sewage and other wastes. In order to make intelligent decisions regarding use and management of water resources for recreation and other demands, an analysis of hydrologic factors related to recreation is essential.The Manistee River is one of Michigan's well-known trout streams-a stream having numerous public access sites and campgrounds. Upstream from Cameron Bridge (see location map) the Manistee is rated as a first-class trout stream but below Cameron Bridge the river is rated only as a fair trout stream by the Michigan Department of Natural Resources. As a Michigan canoe trail it is second only to the Au Sable River in popularity. Esthetically, the Manistee is one of Michigan's most attractive rivers, its waters flowing cool and clean, and around each bend a pleasant wilderness scene. This report deals with that part of the river upstream from State Highway M-66 at Smithville. Several hard-surface roads give access to the upper river as shown on the location map. Numerous dirt roads and trails give access to the river at intermediate points. The recreational values of the Manistee depend on its characteristics of streamflow, water quality, and bed and banks. This atlas describes these characteristics and shows how they relate to recreational use.Much of the information presented here was obtained from basic records of the U.S. Geological Survey's Water Resources Division. Additional information was obtained from field reconnaissance surveys in 1968 and 1969. The study was made in cooperation with the Michigan Geological Survey, Gerald E. Eddy, Chief. Assistance was also obtained from other sections of the Michigan Department of

  13. Evaporite karst of northern lower Michigan

    Science.gov (United States)

    Black, T.J.

    1997-01-01

    Michigan has three main zones of evaporite karst: collapse breccia in Late Silurian deposits of the Mackinac Straits region; breccia, collapse sinks, and mega-block collapse in Middle Devonian deposits of Northern Lower Michigan, which overlaps the preceding area; and areas of soil swallows in sinks of Mississippian deposits between Turner and Alabaster in Arenac and Iosco counties, and near Grand Rapids in Kent County. The author has focused his study on evaporite karst of the Middle Devonian deposits. The Middle Devonian depos its are the Detroit River Group: a series consisting of limestone, dolomite, shale, salt, gypsum, and anhydrite. The group occurs from subcrop, near the surface, to nearly 1400 feet deep from the northern tip of the Southern Peninsula to the south edge of the "solution front" Glacial drift is from zero to 350 feet thick. Oil and gas exploration has encountered some significant lost-circulation zones throughout the area. Drilling without fluid returns, casing-seal failures, and lost holes are strong risks in some parts of the region. Lost fluid returns near the top of the group in nearby areas indicate some karst development shortly after deposition. Large and irregular lost-circulation zones, linear and patch trends of large sink holes, and 0.25 mile wide blocks of down-dropped land in the northern Lower Peninsula of Michigan were caused by surface- and ground-water movement along faults into the Detroit River Group. Glaciation has removed some evidence of the karst area at the surface. Sinkhole development, collapse valleys, and swallows developed since retreat of the glacier reveal an active solution front in the Detroit River Group.

  14. Water resources of the Flint area, Michigan

    Science.gov (United States)

    Wiitala, Sulo Werner; Vanlier, K.E.; Krieger, Robert A.

    1964-01-01

    sand and gravel also fill some of the valleys in the bedrock surface and yield moderate to large supplies of water. Production from public supply wells tapping the drift aquifers in the area ranges from about 50 to 1,200 gpm. The water from the drift aquifer is hard or very hard and commonly contains objectionable amounts of iron.The Saginaw formation is a source of water to wells supplying some of the small communities and industries in the county. The Saginaw, which is the uppermost bedrock formation in the area, underlies most of the county. It is composed of layers of sandstone, shale, and limestone and some beds of coal. The formation is composed principally of sandstone in some areas of the county, and shale in others. Production from wells tapping the Saginaw ranges from a few to about 500 gpm. The water produced is generally moderately hard or hard and commonly contains objectionable amounts of chloride. The quality of the water limits its development for water supply. Overdrafts from the Saginaw result in a lowering of the piezometric surface and commonly cause an upward migration of water high in chloride.The Michigan and Marshall formations are generally not sources of fresh water where they are overlain by the Saginaw formation. In the southern and eastern parts of the county where they are overlain by glacial deposits, they are a source of water of good quality. The quantity of water obtainable from these formations is not fully known. However, the Marshall may be a source of large supplies of water in the southeastern part of the county.An ample supply of water is available in lakes, ponds, and streams in the metropolitan area of Flint to meet requirements for domestic, sanitary, and firefighting use in civil defense emergencies. The extent of emergency use of water from these sources would depend upon the pumping, distribution, and treatment facilities available. Enough private industrial and commercial, and public wells are present in the area normally

  15. Impacts on South Carolina timber production over the last five decades.

    Science.gov (United States)

    Jinglong Mo; Thomas Straka; Richard Harper

    2013-01-01

    Timberland ownership patterns and national forest timber harvesting policy have undergone significant changes in South Carolina over the past five decades. Timber output studies for the state commonly focused on short time frames and seldom addressed timberland ownership patterns in detail. We describe fifty-year timber output for South Carolina, allowing us to address...

  16. Development of a six-year research needs assessment for timber transportation structures

    Science.gov (United States)

    Terry J. Wipf; Michael A. Ritter; Sheila Rimal Duwadi; Russell C. Moody

    1993-01-01

    A timber bridge, once a thing of the past, is now becoming a thing of the present. Interest in timber bridges and other transportation structures has been rapidly increasing. Much of this is due to new technologies in design and construction as well as advances in material manufacturing and presevative treatments. Although timber bridges and other transportation...

  17. Forensic timber identification: It's time to integrate disciplines to combat illegal logging

    Science.gov (United States)

    Eleanor E. Dormontt; Markus Boner; Birgit Braun; Gerhard Breulmann; Bernd Degen; Edgard Espinoza; Shelley Gardner; Phil Guillery; John C. Hermanson; Gerald Koch; Soon Leong Lee; Milton Kanashiro; Anto Rimbawanto; Darren Thomas; Alex C. Wiedenhoeft; Yafang Yin; Johannes Zahnen; Andrew J. Lowe

    2015-01-01

    The prosecution of illegal logging crimes is hampered by a lack of available forensic timber identification tools, both for screening of suspectmaterial and definitive identification of illegally sourcedwood. Reputable timber traders are also struggling to police their own supply chains and comply with the growing requirement for due diligence with respect to timber...

  18. Robustness Analysis of a Timber Structure with Ductile Behaviour in Compression

    DEFF Research Database (Denmark)

    Čizmar, Dean; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    2011-01-01

    This paper presents a probabilistic approach for structural robustness assessment for a timber structure built a few years ago. The robustness analysis is based on a structural reliability based framework for robustness assessment. The complex timber structure with a large number of failure modes...... material ductility of timber is taken into account. The robustness is expressed and evaluated by a robustness index....

  19. The 1993 timber assessment market model: structure, projections, and policy simulations.

    Science.gov (United States)

    Darius M. Adams; Richard W. Haynes

    1996-01-01

    The 1993 timber assessment market model (TAMM) is a spatial model of the solidwood and timber inventory elements of the U.S. forest products sector. The TAMM model provides annual projections of volumes and prices in the solidwood products and sawtimber stumpage markets and estimates of total timber harvest and inventory by geographic region for periods of up to 50...

  20. Using TPO data to estimate timber demand in support of planning on the Tongass National Forest

    Science.gov (United States)

    Jean M. Daniels; Michael D. Paruszkiewicz; Susan J. Alexander

    2015-01-01

    Projections of Alaska timber products output, the derived demand for logs, lumber, residues, and niche products, and timber harvest by owner are developed by using a trend-based analysis. This is the fifth such analysis performed since 1990 to assist planners in meeting statutory requirements for estimating planning cycle demand for timber from the Tongass National...

  1. 36 CFR 294.24 - Timber cutting, sale, or removal in Idaho Roadless Areas.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Timber cutting, sale, or..., DEPARTMENT OF AGRICULTURE SPECIAL AREAS Idaho Roadless Area Management § 294.24 Timber cutting, sale, or removal in Idaho Roadless Areas. (a) Wild Land Recreation. The cutting, sale, or removal of timber is...

  2. Protection of mechanized timberings on beds dangerous for mine impacts

    Energy Technology Data Exchange (ETDEWEB)

    Budirsky, S

    1982-01-01

    In some stoping faces on beds which are dangerous for mine impacts, mechanized timbering is successfully used which is not equipped with protection from the effect of these dynamic phenomena. This generated the idea that in the indicated conditions, mechanized timbering may not be equipped with protective devices against dynamic loads. Theoretical studies have shown that the effects of mine impacts depends on the total energy of the impact, distance of this stoping face from the epicenter of the impact, as well as the capacity of the rock massif to transmit and absorb energy of the mine impact. This means that the effect of the mine impact under different conditions is not the same, the mine impacts of lower energy under definite conditions can result in greater damages to the mechanized timbering than mine impact with higher energy. It is believed that the effect of absorption of energy of the mine impact depends on the method of control of the roofing in the stoping face, the presence of hydraulic fill quarantees absorption of up to 80% of its energy. The experience of working beds which are dangerous for mine impacts in the upper Silesia coal basin indicated that the designs of the mechanized timbering, especially shield, in which the stands are not rigidly connected to the roof timber, during operation on beds with thickness 2.5-4 m withstand mine impacts with energy 10/sup 7/ J without significant disorders (mine impacts with this energy occur very frequently . For energy of mine impact of 108 J (impacts with this energy are observed comparatively rarely), the mechanized timberings are considerably damaged.

  3. Mortality Rates Among Arab Americans in Michigan

    OpenAIRE

    Dallo, Florence J.; Schwartz, Kendra; Ruterbusch, Julie J.; Booza, Jason; Williams, David R.

    2012-01-01

    The objectives of this study were to: (1) calculate age-specific and age-adjusted cause-specific mortality rates for Arab Americans; and (2) compare these rates with those for blacks and whites. Mortality rates were estimated using Michigan death certificate data, an Arab surname and first name list, and 2000 U.S. Census data. Age-specific rates, age-adjusted all-cause and cause-specific rates were calculated. Arab Americans (75+) had higher mortality rates than whites and blacks. Among men, ...

  4. Creating Safe and Healthy Futures: Michigan Youth Violence Prevention Center

    Science.gov (United States)

    Morrel-Samuels, Susan; Zimmerman, Marc A.; Reischl, Thomas M.

    2013-01-01

    Youth are in the cross-fire of gun violence, and the highest rate in the nation is in Flint, Michigan. This article highlights six innovative strategies that prepare youth to solve problems at home and in their communities in peaceful ways. The Michigan Youth Violence Prevention Center (MI-YVPC) works with community groups to strengthen…

  5. Education Inputs, Student Performance and School Finance Reform in Michigan

    Science.gov (United States)

    Chaudhary, Latika

    2009-01-01

    This paper estimates the impact of the Michigan school finance reform, "Proposal A," on education inputs and test scores. Using a difference-in-difference estimation strategy, I find that school districts in Michigan used the increase in educational spending generated through "Proposal A" to increase teacher salaries and reduce…

  6. Lake Michigan lake trout PCB model forecast post audit

    Science.gov (United States)

    Scenario forecasts for total PCBs in Lake Michigan (LM) lake trout were conducted using the linked LM2-Toxics and LM Food Chain models, supported by a suite of additional LM models. Efforts were conducted under the Lake Michigan Mass Balance Study and the post audit represents th...

  7. Estimating Cause: Teacher Turnover and School Effectiveness in Michigan

    Science.gov (United States)

    Keesler, Venessa; Schneider, Barbara

    2010-01-01

    The purpose of this paper is investigate issues related to within-school teacher supply and school-specific teacher turnover within the state of Michigan using state administrative data on Michigan's teaching force. This paper 1) investigates the key predictors of teacher turnover and mobility, 2) develops a profile of schools that are likely to…

  8. Unemployment Insurance Fund Insolvency and Debt in Michigan.

    Science.gov (United States)

    Blaustein, Saul J.

    Without changes in Michigan's unemployment insurance law, the state's unemployment insurance debt will probably reach $3.8 billion by the end of 1985. Currently, Michigan's employers pay unemployment insurance tax rates that vary from 1 to 9 percent, depending upon the amount of benefits charged against their accounts. Beginning with the federal…

  9. Theory of timber connections with slender dowel type fasteners

    DEFF Research Database (Denmark)

    Svensson, Staffan; Munch-Andersen, Jørgen

    2018-01-01

    A theory on the lateral load-carrying capacity of timber connections with slender fasteners is presented. The base of the theory is the coupled mechanical phenomena acting in the connection, while the wood and the slender fastener deform and yield prior to failure. The objective is to derive...... a sufficient description of actions and responses which have determining influence on the load-carrying capacity of timber connections with slender fasteners. Model assumptions are discussed and made, but simplifications are left out. Even so, simple mathematical equations describing the lateral capacity......-carrying capacity of the tested connections....

  10. Global timber trade pattern: the cards have changed

    OpenAIRE

    Roda Jean-Marc; Rohana Abd Rahman; Ismariah Ahmad; Lim Hin Fui; Mohd Parid Mamat

    2011-01-01

    Since the 1960s, the global timber trade has gradually evolved from a South-North trade to a South-South trade, with an acceleration of the phenomenon in the mid 1990s. Nowadays, Asia consumes more than 70% (in round wood equivalent) of the forest products originating from the tropics. Africa becomes the new frontier for the supplies of wood material for Asian giants, which now source raw wood from all over the world. Since the mid 1990s, the dynamics of the tropical timber trade have been in...

  11. Fire resistance in American heavy timber construction history and preservation

    CERN Document Server

    Heitz, Jesse

    2016-01-01

    This volume presents a history of heavy timber construction (HTC) in the United States, chronicling nearly two centuries of building history, from inception to a detailed evaluation of one of the best surviving examples of the type, with an emphasis on fire resistance. The book does not limit itself in scope to serving only as a common history. Rather, it provides critical analysis of HTC in terms of construction methods, design, technical specifications, and historical performance under fire conditions. As such, this book provides readers with a truly comprehensive understanding and exploration of heavy timber construction in the United States and its performance under fire conditions.

  12. Pre-Stressing Timber-Based Plate Tensegrity Structures

    DEFF Research Database (Denmark)

    Falk, Andreas; Kirkegaard, Poul Henning

    2012-01-01

    Tensile structures occur in numerous varieties utilising combinations of tension and compression. Introducing structural plates in the basic tensegrity unit and tensegric assemblies varies the range of feasible topologies and provides the structural system with an integrated surface. The present...... paper considers the concept of plate tensegrity based on CLT plates (cross-laminated timber). It combines the principles of tensegrity with the principles of plate shells and is characterised by a plate shell stabilised by struts and cables. The paper deals with material aspects and robustness of timber...

  13. Analysis of the Strength of Timber and Glulam Timber Beams with Steel Reinforcement

    Directory of Open Access Journals (Sweden)

    Arie Putra Usman

    2015-12-01

    Full Text Available Indonesia is a tropical country with abundant tropical timber that can be used as a building material. Wood is a renewable material, thus making it an environmentally friendly construction material. However, the dimensional limitations of solid wood may pose problems in structural constructions. Wood material also has some disadvantages, such as brittle failure. However, the ductility of wood can be increased because of plasticity occurring in the compression zone. Wood material with good ductility can be obtained by reinforcing it in the tensile zone. This study is about the strength of wood material for use as a material for structural elements. Based on the analytical findings, the bending capacity of wood can be improved by adding reinforcements to the tensile zone.

  14. Stable lead geochronology of fine-grained sediments in Southern Lake Michigan

    International Nuclear Information System (INIS)

    Robbins, J.A.; Edgington, D.N.

    1974-01-01

    In a previous article, it was shown that the vertical distribution of stable lead in the fine-grained sediments of Lake Michigan reflects the history of cultural lead inputs. It was found that the lead distributions in dated cores are quantitatively described by a universal time-dependent loading or source function which is a linear combination of estimated annual inputs of atmospheric lead derived from the combustion of leaded gasoline and the burning of coal in and around Chicago since about 1800. The existence of such a source function for lead implies that stable lead itself may be used to date sediment cores. Mercury depth profiles in western Lake Erie sediments have shown several horizons which correspond to the development of local industrial use of mercury over the past forty years or so. The construction of the lead source function for Lake Michigan sediments was based on only four lead-210 dated cores. To establish the validity of the source function concept, it is applied to the distribution of lead determined in many cores previously obtained from southern Lake Michigan

  15. Agreement Between Michigan State University and Lodge 141, Fraternal Order of Police, Michigan State University Division, July 1, 1974.

    Science.gov (United States)

    Michigan State Univ., East Lansing.

    This agreement, entered into July 1, 1974, is between the Board of Trustees of Michigan State University and Lodge 141 of the Fraternal Order of Police, Michigan State University Division. It is the intent and purpose of this agreement to assure sound and mutually beneficial working and economic relationships between the parties, to provide an…

  16. Recruitment variability of alewives in Lake Michigan

    Science.gov (United States)

    Madenjian, C.P.; Hook, T.O.; Rutherford, E.S.; Mason, D.M.; Croley, T.E.; Szalai, E.B.; Bence, J.R.

    2005-01-01

    We used a long-term series of observations on alewife Alosa pseudoharengus abundance that was based on fall bottom-trawl catches to assess the importance of various abiotic and biotic factors on alewife recruitment in Lake Michigan during 1962–2002. We first fit a basic Ricker spawner–recruit model to the lakewide biomass estimates of age-3 recruits and the corresponding spawning stock size; we then fit models for all possible combinations of the following four external variables added to the basic model: an index of salmonine predation on an alewife year-class, an index for the spring–summer water temperatures experienced by alewives during their first year in the lake, an index of the severity of the first winter experienced by alewives in the lake, and an index of lake productivity during an alewife year-class's second year in the lake. Based on an information criterion, the best model for alewife recruitment included indices of salmonine predation and spring–summer water temperatures as external variables. Our analysis corroborated the contention that a decline in alewife abundance during the 1970s and early 1980s in Lake Michigan was driven by salmonine predation. Furthermore, our findings indicated that the extraordinarily warm water temperatures during the spring and summer of 1998 probably led to a moderately high recruitment of age-3 alewives in 2001, despite abundant salmonines.

  17. Use of timber in shipbuilding industry: Identification and analysis of timber from shipwrecks off Goa coast, India

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.; Sujatha, M.; Rao, R.V.; Rao, K.S.

    for construction of sea going ships, which could resist the action of waves, currents, marine biofouling, above all, it would bring joy and wealth. In order to locate the remains of ships, cargo and their history, maritime archaeological explorations were carried...

  18. In vitro propagation of an endangered medicinal timber species ...

    African Journals Online (AJOL)

    The over exploitation of African mahogany in tropical forest has threatened the genetic base of this useful timber and medicinal tree species and as such, an experiment was conducted on the in vitro culture of Khaya grandifoliola, an endangered tree species commonly found in the high forest zones of West Africa to explore ...

  19. 75 FR 63419 - Surety Bond Guarantee Program; Timber Sales

    Science.gov (United States)

    2010-10-15

    ... with the contract terms. 36 CFR 223.35. Generally, the Performance Bond, as defined in 13 CFR 115.10, ensures that the Principal, as defined in 13 CFR 115.10, complies with all contract terms and conditions... timber sale contracts awarded by the Federal Government or other public or private landowners. DATES...

  20. Projecting southern timber supply for multiple products by subregion

    Science.gov (United States)

    Robert C. Abt; Frederick W. Cubbage; Karen L. Abt

    2009-01-01

    While timber supply modeling has been of importance in the wood-producing regions of the United States for decades, it is only more recently that the technology and data have allowed disaggregation of supply and demand to substate regions, including product specific breakdowns and endogenous land use and plantation changes. Using southwide data and an economic supply...

  1. An Ethnobotanical Survey on Fuel Wood and Timber plant Species ...

    African Journals Online (AJOL)

    Yomi

    2011-12-19

    Dec 19, 2011 ... 3Department of Botany, Post Graduate College Abbottabad, Pakistan. Accepted 17 March, 2011. A survey was conducted to explore the fuel wood species and timber producing species of Kaghan valleys, Pakistan. Consumption pattern and impact on the forest resources were also taken into consideration.

  2. Essays on the economics of British Columbian timber policy

    NARCIS (Netherlands)

    Niquidet, Kurt

    2007-01-01

    This thesis examines the process of institutional change in British Columbia’s timber sector. It is composed of a series of essays which highlight the underlying political and economic factors that have shaped past and current reforms. Taking center stage in the analysis, are the resource rents

  3. Forest ecosystem services: Provisioning of non-timber forest products

    Science.gov (United States)

    James L. Chamberlain; Gregory E. Frey; C. Denise Ingram; Michael G. Jacobson; Cara Meghan Starbuck Downes

    2017-01-01

    The purpose of this chapter is to describe approaches to calculate a conservative and defensible estimate of the marginal value of forests for non-timber forest products (NTFPs). 'Provisioning" is one of four categories of benefits, or services that ecosystems provide to humans and was described by the Millennium Ecosystem Assessment as 'products...

  4. Pennsylvania hardwood timber bridges : field performance after 10 years

    Science.gov (United States)

    James P. Wacker; Carlito Calil

    2004-01-01

    Several hardwood demonstration timber bridges were built by the Pennsylvania Department of Transportation in the early nineteen nineties. These bridge superstructures are of the recently developed stress-laminated deck design-type using Red Oak lumber laminations that were pressure-treated with creosote preservatives. This paper will describe the data acquisition...

  5. The Effect of Urban Sprawls on Timber Harvesting

    Science.gov (United States)

    Stephen A. Barlow; Ian A Munn; David A. Cleaves; David L. Evans

    1998-01-01

    In Mississippi and Alabama, urban population growth is pushing development into rural areas. To study the impact of urbanization on timber harvesting, census and forest inventory data were combined in a geographic information system, and a logistic regression model was used to estimate the relationship between several variables and harvest probabilities....

  6. Chapter 4: Lateral design of cross-laminated timber buildings

    Science.gov (United States)

    John W. van de Lindt; Douglas Rammer; Marjan Popovski; Phil Line; Shiling Pei; Steven E. Pryor

    2013-01-01

    Cross-laminated timber (CLT) is an innovative wood product that was developed approximately two decades ago in Europe and has since been gaining in popularity. Based on the experience of European researchers and designers, it is believed that CLT can provide the U.S. market the opportunity to build mid- and high-rise wood buildings. This Chapter presents a summary of...

  7. Finite element analysis of composite concrete-timber beams

    Directory of Open Access Journals (Sweden)

    N. C. S. FORTI

    Full Text Available AbstractIn the search for sustainable construction, timber construction is gaining in popularity around the world. Sustainably harvested wood stores carbon dioxide, while reforestation absorbs yet more CO2. One technique involves the combination of a concrete slab and a timber beam, where the two materials are assembled by the use of flexible connectors. Composite structures provide reduced costs, environmental benefits, a better acoustic performance, when compared to timber structures, and maintain structural safety. Composite structures combine materials with different mechanical properties. Their mechanical performance depends on the efficiency of the connection, which is designed to transmit shear longitudinal forces between the two materials and to prevent vertical detachment. This study contributes with the implementation of a finite element formulation for stress and displacement determination of composite concrete-timber beams. The deduced stiffness matrix and load vector are presented along to numerical examples. Numerical examples are compared to the analytical equations available in Eurocode 5 and to experimental data found in the literature.

  8. Emissions from prescribed burning of timber slash piles in Oregon.

    Science.gov (United States)

    Emissions from burning piles of post-harvest timber slash (Douglas fir) in Grande Ronde, Oregon were sampled using an instrument platform lofted into the plume using a tether-controlled aerostat or balloon. Emissions of carbon monoxide, carbon dioxide, methane, particulate matte...

  9. Timber resource of Wisconsin's Northwest Survey Unit, 1983.

    Science.gov (United States)

    W. Brad Smith

    1984-01-01

    The fourth inventory of the timber resource of the Northwest Wisconsin Survey Unit shows a 1.8% decline in commercial forest area and a 36% gain in growing-stock volume between 1968 and 1983. Presented are highlights and statistics on area, volume, growth, mortality, removals, utilization, and biomass.

  10. Smart timber bridge on geosynthetic reinforced soil (GRS) abutments

    Science.gov (United States)

    Adam Senalik; James P. Wacker; Travis K. Hosteng; John Hermanson

    2017-01-01

    Recently, Buchanan County, Iowa, has cooperated with the U.S. Federal Highway Administration (FHWA), USDA Forest Service, Forest Products Laboratory (FPL), and Iowa State University’s Bridge Engineering Center (ISU–BEC) to initiate a project involving the construction and monitoring of a glued-laminated (glulam) timber superstructure on geosynthetic reinforced soil (...

  11. TRIM timber projections: an evaluation based on forest inventory measurements.

    Science.gov (United States)

    John R. Mills

    1989-01-01

    Two consecutive timberland inventories collected from permanent plots in the natural pine type in North Carolina were used to evaluate the timber resource inventory model (TRIM). This study compares model predictions with field measurements and examines the effect of inventory data aggregation on the accuracy of projections. Projections were repeated for two geographic...

  12. Non-timber forest products in sustainable forest management

    Science.gov (United States)

    James L. Chamberlain; A.L. Hammett; Philip A. Araman

    2001-01-01

    The forests of Southern United States are the source of many non-timber forest products (NTFPs). The collection, trade and use of these products have been important to rural economies since Europeans settled in this country. At the same time the plants from which these products originate are crucial to healthy ecosystems. Over the last decade, the market demand and the...

  13. 36 CFR 223.85 - Noncompetitive sale of timber.

    Science.gov (United States)

    2010-07-01

    ... further advertisement, at not less than appraised value, any timber previously advertised for competitive... degradation or resource damage, or as the result of administrative appeals, litigation, or court orders... any applicable appeals or objection process has been completed may be considered for replacement...

  14. Modeling ground-based timber harvesting systems using computer simulation

    Science.gov (United States)

    Jingxin Wang; Chris B. LeDoux

    2001-01-01

    Modeling ground-based timber harvesting systems with an object-oriented methodology was investigated. Object-oriented modeling and design promote a better understanding of requirements, cleaner designs, and better maintainability of the harvesting simulation system. The model developed simulates chainsaw felling, drive-to-tree feller-buncher, swing-to-tree single-grip...

  15. Global timber investments, wood costs, regulation, and risk

    Science.gov (United States)

    F. Cubbage; S. Koesbandana; P Mac Donagh; R. Rubilar; G Balmelli; V. Morales Olmos; R. De La Torre; M. Murara; V.A. Hoeflich; H. Kotze; R Gonzalez; O. Carrero; G. Frey; T. Adams; J. Turner; R. Lord; J. Huang; C. MacIntyre; Kathleen McGinley; R. Abt; R. Phillips

    2010-01-01

    We estimated financial returns and wood production costs in 2008 for the primary timber plantation species. Excluding land costs, returns for exotic plantations in almost all of South America e Brazil, Argentina, Uruguay, Chile, Colombia, Venezuela, and Paraguay e were substantial. Eucalyptus species returns were generally greater than those for Pinus species in each...

  16. Marketing of Non-Timber Forest Products in Kajola Local ...

    African Journals Online (AJOL)

    Marketing of Non-Timber Forest Products in Kajola Local Government Area of Oyo State, Nigeria. ... International Journal of Tropical Agriculture and Food Systems ... The results of the marketing margin reveal that charcoal commanded the highest margin of ₦2500, followed by bush meat (₦300), while wrapping had the ...

  17. probabilistic evaluation of eur robabilistic evaluation of eur a timber

    African Journals Online (AJOL)

    eobe

    than steel or concrete [13]. Fire is an emotive sub ... Kaura1, I. Abubakar2, U. Hassan3 and I. Aliyu4 ... portal frame in fire is the failure of the rafter-column connection that re column ...... Thin-webbed Timber Beams”, Asian Journal of Civil.

  18. 36 CFR 261.6 - Timber and other forest products.

    Science.gov (United States)

    2010-07-01

    ... such product is identified as required in such permit or contract. (f) Selling or exchanging any timber... 74 FR 26091, June 1, 2009, the amendment was delayed indefinitely. For the convenience of the user..., memorandum of agreement, memorandum of understanding, or personal-use authorization (f) Selling or exchanging...

  19. Self-extinguishment of cross-laminated timber

    NARCIS (Netherlands)

    Crielaard, R.; van de Kuilen, J.W.G.; Terwel, K.C.; Ravenshorst, G.J.P.; Steenbakkers, P.; Breunesse, A.

    2016-01-01

    Cross-laminated timber, or CLT, is receiving attention for its potential use in tall buildings. As a combustible material, one of the challenges for the construction of these buildings is the fire risk that results from its use in the structure. Unprotected CLT can burn along with the fuel load

  20. Chapter 5: Connections Connections in cross-laminated timber buildings

    Science.gov (United States)

    Mohammad Mohammad; Bradford Douglas; Douglas Rammer; Steven E. Pryor

    2013-01-01

    The light weight of cross-laminated timber (CLT) products combined with the high level of prefabrication involved, in addition to the need to provide wood-based alternative products and systems to steel land concrete, have significantly contributed to the development of CLT products and systems, especially in mid-rise buildings (5 to 9 stories). While this product is...

  1. Chapter 1: CLT Introduction to cross-laminated timber

    Science.gov (United States)

    Sylvan Gagnon; E.M.(Ted) Bilek; Lisa Podesto; Pablo Crespell

    2013-01-01

    Cross-laminated timber ( CLT), a new generation of engineered wood product developed initially in Europe, has been gaining increased popularity in residential and non-residential applications in several countries. Many impressive low- and mid-rise buildings built around the world using CLT showcase the many advantages this product has to offer to the construction...

  2. Timber beams loaded perpendicular to grain by multiple connections

    NARCIS (Netherlands)

    Leijten, A.J.M.; Schoenmakers, J.C.M.

    2014-01-01

    In timber structures, beams which are loaded perpendicular to grain by connections along the span may fail by splitting, resulting in the collapse of the beam. In the past, empirical, semi-empirical and fracture mechanical models have been developed aiming at predicting the splitting failure load.

  3. Determining modulus of elasticity of ancient structural timber

    Science.gov (United States)

    Houjiang Zhang; Lei Zhu; Yanliang Sun; Xiping Wang; Haicheng Yan

    2011-01-01

    During maintenance of ancient timber architectures, it is important to determine mechanical properties of the wood component materials non-destructively and effectively, so that degraded members may be replaced or repaired to avoid structural failure. Experimental materials are four larch (Larix principis-rupprechtii Mayr.) components, which were taken down from the...

  4. Timber market research, private forests, and policy rhetoric

    Science.gov (United States)

    David N. Wear; Jeffrey P. Prestemon

    2004-01-01

    The development of the profession and practice of forestry in the United States can be linked to urgent concerns regarding timber shortages in the late 19th century (Williams 1989). These were based largely on perceived failures of forest landowners to protect or invest enough in the productive capacity of their forests (Manthy 1977). The South, as the only major...

  5. Forest soil biology-timber harvesting relationships: a perspective

    Science.gov (United States)

    M. F. Jurgensen; M. J. Larsen; A. E. Harvey

    1979-01-01

    Timber harvesting has a pronounced effect on the soil microflora by wood removal and changing properties. This paper gives a perspective on soil biology-harvesting relationships with emphasis on the northern Rocky Mountain region. Of special significance to forest management operations are the effects of soil micro-organisms on: the availability of soil nutrients,...

  6. Effects of timber harvest following wildfire in western North America

    Science.gov (United States)

    David L. Peterson; James K. Agee; Gregory H. Aplet; Dennis P. Dykstra; Russell T. Graham; John F. Lehmkuhl; David S. Pilliod; Donald F. Potts; Robert F. Powers; John D. Stuart

    2009-01-01

    Timber harvest following wildfire leads to different outcomes depending on the biophysical setting of the forest, pattern of burn severity, operational aspects of tree removal, and other management activities. Fire effects range from relatively minor, in which fire burns through the understory and may kill a few trees, to severe, in which fire kills most trees and...

  7. A Computer Program to Evaluate Timber Production Investments Under Uncertainty

    Science.gov (United States)

    Dennis L. Schweitzer

    1968-01-01

    A computer program has been written in Fortran IV to calculate probability distributions of present worths of investments in timber production. Inputs can include both point and probabilistic estimates of future costs, prices, and yields. Distributions of rates of return can also be constructed.

  8. Strength and stiffness capacity utilisation of timber members in roof ...

    African Journals Online (AJOL)

    C Brand Wessels, Nils-Olaf Petersen. Abstract. The main objective of this study was to determine which property, of the six strength and stiffness properties used in structural timber design, was the most influential in the design of nail-plated roof trusses. Thirty recently completed nail-plated roof truss designs were randomly ...

  9. Gender analysis of non-timber forest products (NTFPs) collection ...

    African Journals Online (AJOL)

    Millions of people, especially those living in rural areas in developing countries collect Non-Timber Forest products (NTFPs) daily. Women are known to play a prominent role in forestry and agricultural production in Nigeria despite not been captured as economically productive. This work looked into gender dimension ...

  10. 25 CFR 163.23 - Advance payment for timber products.

    Science.gov (United States)

    2010-04-01

    ... contracts. However, no advance payment will be required that would make the sum of such payment and of... required, advance payments will operate the same as provided for in § 163.23(a) of this part. ... 25 Indians 1 2010-04-01 2010-04-01 false Advance payment for timber products. 163.23 Section 163...

  11. Contribution of timber exports to economic growth in Nigeria: an ...

    African Journals Online (AJOL)

    The paper examined the contribution of timber exports to the economic growth in Nigeria, using an econometric approach. Augmented Dickey-Fuller (ADF) and Johansen Co-integration techniques were respectively used to test for unit root and examine the relationship between the variables used. In addition, Granger ...

  12. ECOLOGICAL EFFECT OF TIMBER EXPRACTION IN OHIMINI LGA ...

    African Journals Online (AJOL)

    Shima

    as Indonesia, Thailand, Malaysia, ... reduced biodiversity (Wikipedia, 2007). In many countries massive timber extraction is ongoing and is shaping climate and geography. logging affects the amount of water in the soil and groundwater and the moisture in the atmosphere. Forests support considerable biodiversity, providing.

  13. How to establish, maintain and use timber depletion accounts

    Science.gov (United States)

    William C. Siegel

    2001-01-01

    Section 1221 of the Internal Revenue Code defines capital expenditures. In general, these are amounts spent to acquire real estate or equipment, or to make improvements that increase the value of real estate or equipment already owned. Forestry examples include land, buildings, standing timber, reforestation costs, and tractors and trucks. Property owners who incur...

  14. Timber resource statistics for the Sacramento resource area of California.

    Science.gov (United States)

    Karen L. Waddell; Patricia M. Bassett

    1997-01-01

    This report is a summary of timber resource statistics for the Sacramento Resource Area of California, which includes Butte, Colusa, El Dorado, Glenn, Lake, Napa, Nevada, Placer, Plumas, Sacramento, Sierra, Sutter, Tehama, Yolo, and Yuba Counties. Data were collected as part of a statewide multiresource inventory. The inventory sampled private and public lands except...

  15. Timber resource statistics for Washington, January 1, 1973.

    Science.gov (United States)

    Patricia M. Bassett; Grover A. Choate

    1974-01-01

    Timber resource statistics to January 1, 1973, for the State of Washington show total land area, commercial timberland area, and growing stock and sawtimber inventory volumes by county and owner group. Growth and removals are shown by Forest Survey inventory unit for 1972. Each National Forest is updated to January 1, 1973.

  16. Timber resource statistics for Oregon, January 1, 1973.

    Science.gov (United States)

    Patricia M. Bassett; Grover A. Choate

    1974-01-01

    Timber resource statistics as of January 1, 1973, for the State of Oregon show total land area, commercial timberland area, and growing stock and sawtimber inventory volumes by county and owner group. Growth and removals are shown by Forest Survey inventory unit for 1972. Each National Forest is updated to January 1, 1973, as well as each Bureau of Land Management...

  17. Harvest choice and timber supply models for forest forecasting

    Science.gov (United States)

    Maksym Polyakov; David N Wear

    2010-01-01

    Timber supply has traditionally been modeled using aggregate data, whereas individual harvest choices have been shown to be sensitive to the vintage and condition of forest capital stocks. In this article, we build aggregate supply models for four roundwood products in a seven-state region of the US South directly from stand-level harvest choice models applied to...

  18. Building aggregate timber supply models from individual harvest choice

    Science.gov (United States)

    Maksym Polyakov; David N. Wear; Robert Huggett

    2009-01-01

    Timber supply has traditionally been modelled using aggregate data. In this paper, we build aggregate supply models for four roundwood products for the US state of North Carolina from a stand-level harvest choice model applied to detailed forest inventory. The simulated elasticities of pulpwood supply are much lower than reported by previous studies. Cross price...

  19. Forest management planning for timber production: a sequential approach

    Science.gov (United States)

    Krishna P. Rustagi

    1978-01-01

    Explicit forest management planning for timber production beyond the first few years at any time necessitates use of information which can best be described as suspect. The two-step approach outlined here concentrates on the planning strategy over the next few years without losing sight of the long-run productivity. Frequent updating of the long-range and short-range...

  20. An Ethnobotanical Survey on Fuel Wood and Timber plant Species ...

    African Journals Online (AJOL)

    A survey was conducted to explore the fuel wood species and timber producing species of Kaghan valleys, Pakistan. Consumption pattern and impact on the forest resources were also taken into consideration. A questionnaire was used as a survey instrument to obtain desired data. For this study, 10 villages were randomly ...

  1. Environmental status of the Lake Michigan region. Volume 6. Zoobenthos of Lake Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Mozley, S.C.; Howmiller, R.P.

    1977-09-01

    This report summarizes Lake Michigan zoobenthic studies up to 1974, including reports of power-plant surveys. It describes ecologies of macroinvertebrate species and some microfauna, partly through use of data from other Great Lakes. The following are discussed: methodology of field surveys; zoobenthic indicators of pollution; zoobenthic effects on sediment-water exchanges; and numbers, biomass, and production of total macroinvertebrates. Prominent features of Lake Michigan zoobenthos include predominance of the amphipod Pontoporeia affinis, usefulness of tubificid oligochaetes in mapping environmental quality, and pronounced qualitative gradients in zoobenthos in relation to depth. Further research is needed on sampling methods, energy flow rates and pathways through benthic communities, factors limiting distribution of species near shore, and effects of macroinvertebrates on sediment chemistry and structure.

  2. Total Weight and Axle Loads of Truck Units in the Transport of Timber Depending on the Timber Cargo

    Directory of Open Access Journals (Sweden)

    Grzegorz Trzciński

    2018-03-01

    Full Text Available When transporting timber, the high variability of species, assortments and moisture content of the wood raw material does not allow the weight of the transported timber to be precisely determined. This often contributes to the excessive weight loading of the entire truck unit. The aim of the research is to present the variability of the total weight of truck units with wood cargoes (GVW—gross vehicle weight depending on the weight of the empty unit and the transported timber load, as well as to analyze the changes in GVW, unit loads of wood and load on individual truck unit axles depending on the season. This study analyzes the total weight of truck units for 376 transports of Scots pine timber at different times of the year. The total weight of the truck units depends on the weight of an empty unit and the weight of the load. GVW was determined by using a weighbridge to weigh the vehicles and then the empty unit after unloading. The weight of the load was obtained as the difference between GVW and the tare. It was found that GVW differed significantly depending on the truck unit used, ranging from 43.60–58.80 Mg, often exceeding permissible limits for public roads. The individual axle loads for various truck units were also analyzed. The obtained results indicate that these loads are more equally distributed in the case of five-axle trucks compared to six-axle ones.

  3. Sarcoptic mange in raccoons in Michigan.

    Science.gov (United States)

    Fitzgerald, Scott D; Cooley, Thomas M; Murphy, Alice; Cosgrove, Melinda K; King, Betty A

    2004-04-01

    Sarcoptic mange is a cause of pruritic skin disease in domestic dogs and a wide range of wildlife species. We describe sarcoptic mange in free-ranging raccoons (Procyon lotor). Three adult raccoons from upper Wayne County, Michigan (USA), were captured, killed, and submitted for diagnostic evaluation. The animals were intensely pruritic, and two had advanced alopecic and crusting lesions over their dorsum and hind limbs. Skin scrapings and skin biopsies revealed crusting and hyperkeratotic dermatitis with high numbers of Sarcoptes scabiei adults, larvae, nymphs, and eggs. These raccoons were not otherwise debilitated, with minimal internal parasites, good body condition, and no evidence of infectious bacterial or viral diseases. Because sarcoptic mange is highly contagious and affects many species, including humans, transiently, it is important that wildlife biologists and rehabilitators include sarcoptic mange in their differential list for raccoons exhibiting pruritus and alopecia.

  4. Thermal discharge residence by Lake Michigan Salmonids

    International Nuclear Information System (INIS)

    Romberg, G.P.; Prepejchal, W.

    1975-01-01

    Lake Michigan salmon and trout were tagged with a thermoluminescent dosimeter (TLD) temperature tag to estimate their thermal exposure and residence time at a warm water discharge. Fish were collected, tagged, and released at the Point Beach Nuclear Plant, Two Rivers, Wisconsin, in the fall of 1973 and 1974. Tags were recovered during the same season, primarily from fish recaptured at Point Beach. Average uniform temperature exposure and maximum possible discharge residence time were determined. Appropriate hourly intake and discharge temperatures were averaged to calculate mean temperature exposure for the case of maximum discharge residence. Lowest discharge temperature not included within the period of maximum residence was identified to serve as a possible indicator of avoidance temperature. Mean values for the above parameters were calculated for fish species for each tagging year and are reported with the accompanying range of intake and discharge temperatures

  5. Minority and female training programs at the Ford Nuclear Reactor, University of Michigan

    International Nuclear Information System (INIS)

    Burn, R.R.

    1992-01-01

    Nuclear power industry operations staffs are composed predominantly of white males because most of the personnel come from the nuclear submarine and surface branches of the U.S. Navy. The purpose of the minority and female training programs sponsored by the Ford Nuclear Reactor at the University of Michigan is to provide a path for minorities and women to enter the nuclear industry as operators, technicians, and, in the long term, as graduate engineers. The training programs are aimed at high school students, preferably juniors. While the training is directed toward operation of a nuclear reactor, it is equally applicable to careers in most other technical fields. It is hoped that some of the participants will remain at the Ford Nuclear Reactor as reactor operators, enter college, and obtain college degrees, after which they will enter the nuclear industry as graduate engineers

  6. 75 FR 3253 - Lamb Assembly and Test, LLC, Subsidiary of Mag Industrial Automation Systems, Machesney Park, IL...

    Science.gov (United States)

    2010-01-20

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-70,516] Lamb Assembly and Test, LLC, Subsidiary of Mag Industrial Automation Systems, Machesney Park, IL; Notice of Negative... workers of Lamb Technicon, a division of Unova, Warren, Michigan and Lake Orion, Michigan were previously...

  7. Historic timber skeleton structures and the local seismic culture

    Science.gov (United States)

    Bostenaru, M.

    2009-04-01

    This presentation deals with the employment of timber skeleton structure and the local seismic culture. After the 1755 earthquake in the reconstruction of Lisbon a type of building with timber skeleton and masonry infill called "gaiola pombalina" was promoted, since this was designed to better resists earthquakes. "Gaiola" means cage, and it was also named after the Marques de Pombal who introduced it in the reconstruction following the earthquake. The „gaiola pombalina" presents a timber skeleton with Saint Andrew crosses in the interior walls with masonry infill and thick masonry load bearing walls loosing in thickness to the upper floors in the exterior walls. The masonry can fall out during earthquakes but the building remains staying given the interior timber skeleton. The type of buildings with timber structure and (masonry) infill behaved well in earthquakes in various parts of the earth, like Nepal (the dhaji dewary type), Pakistan, Turkey (the himiş type after the 1999 earthquake) [both latter types were researched by Langenbach, www.conservationtech.com and www.traditional-is-modern.net] and also in Germany after the 1356 earthquake (the Southern German subtype of Fachwerk). Also in Italy a subtype called "casa baraccata" was promoted in a construction code to a similar time (following the 1783 earthquake in Southern Italy, see Tobriner 1983) as that of the "gaiola pombalina", the time of the Baroque, when town planning acquired another status. Unlike at the "gaiola pombalina" the "casa baraccata" the timber skeleton is at the exterior walls. For this reason this type of buildings is considered to be an expression of the local seismic culture. However, this type of buildings is common also for areas where seismic risk is not an issue, like half-timbered in England and the northern subtype of Fachwerk in Northern Germany, and in some high seismic risk regions with mountains and timber resources like Romania is not spread. Given these premises the author

  8. Surficial geologic map of Berrien County, Michigan, and the adjacent offshore area of Lake Michigan

    Science.gov (United States)

    Stone, Byron D.; Kincare, Kevin A.; O'Leary, Dennis W.; Newell, Wayne L.; Taylor, Emily M.; Williams, Van S.; Lundstrom, Scott C.; Abraham, Jared E.; Powers, Michael H.

    2017-12-13

    The surficial geologic map of Berrien County, southwestern Michigan (sheet 1), shows the distribution of glacial and postglacial deposits at the land surface and in the adjacent offshore area of Lake Michigan. The geologic map differentiates surficial materials of Quaternary age on the basis of their lithologic characteristics, stratigraphic relationships, and age. Drill-hole information correlated in cross sections provides details of typical stratigraphic sequences that compose one or more penetrated geologic map units. A new bedrock geologic map (on sheet 2) includes contours of the altitude of the eroded top of bedrock and shows the distribution of middle Paleozoic shale and carbonate units in the subcrop. A sediment thickness map (also on sheet 2) portrays the extent of as much as 150 meters of surficial materials that overlie the bedrock surface.The major physical features of the county are related principally to deposits of the last Laurentide ice sheet that advanced and then retreated back through the region from about 19,000 to 14,000 radiocarbon years before present. Glacial and postglacial deposits underlie the entire county; shale bedrock crops out only in the adjacent offshore area on the bottom of Lake Michigan. All glacial deposits and glacial meltwater deposits in Berrien County are related to the late Wisconsinan glacial advances of the Lake Michigan ice lobe and its three regional recessional moraines, which cross the county as three north-northeast-trending belts.From east to west (oldest to youngest), the three moraine belts are known as the Kalamazoo, Valparaiso, and Lake Border morainic systems. The till-ridge morainic systems (Lake Border and local Valparaiso morainic systems) consist of multiple, elongate moraine ridges separated by till plains and lake-bottom plains. Tills in ground and end moraines in Berrien County are distinguished as informal units, and are correlated with three proposed regional till units in southwestern Michigan

  9. Case Studies on Timber Defects of Selected Traditional Houses in Malacca

    Directory of Open Access Journals (Sweden)

    Nor Haniza Ishak

    2007-12-01

    Full Text Available The effect of adverse environmental conditions on building materials and the extent of damage caused depends on both the materials used and the environmental conditions. Although timber is a diminishing resource, it is still widely used in today's construction. In Malaysia, timber is one of the main components of many historic buildings. Appropriate maintenance of such buildings requires an understanding of timber defects and its related problems. Timber defects are classified into two major groups: non-biological and biological deteriorations. Non-biological deterioration consists of physical decay, excessive moisture content, dimensional instability and chemical deterioration. These defects are mainly caused by the timber in service being subjected to environmental exposure. The most common and destructive timber biological deteriorations are those due to dry rot, we t rot as well as insect attacks . A study based on seven selected houses was conducted to identify the most common building defects, specifically on timber components amongst traditional Malay houses in Malacca, Malaysia, A building condition survey was carried out to determine the effect of the environment towards timber buildings and their main components. Data collected were based on the investigation and visual observation of the selected case studies. Findings of this research will serve as an indicator towards maintaining the buildings' timber components in good condition in order that the buildings' life span could be extended and primarily to conserve the valuable traditional timber houses in a historical city.

  10. Detailed Project Report and Environmental Assessment, Northwestern Michigan College, Section 107, Grand Traverse County, Michigan

    Science.gov (United States)

    2011-08-01

    5/18/12 Thu 5/31/12 30 Single 6" x 10" wood beam, heavy mill timber framing 1.5 MBF $5,600.47 10.9 hrs Fri 5/18/12 Thu 5/31/12 31 Metals 1 EA...data sources , gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden... Apportionment 28 5.4.4 Views of Non-Federal Sponsors and Others 28 iii 6.0 Summary of Coordination, Public Involvement and 29

  11. Atmospheric Mercury Transport Across Southern Lake Michigan: Influence from the Chicago/Gary Urban Area

    Science.gov (United States)

    Gratz, L. E.; Keeler, G. J.; Dvonch, J. T.

    2008-12-01

    The local and regional impacts of mercury emissions from major urban and industrial areas are critical to quantify in order to further understand mercury cycling in the environment. The Chicago/Gary urban area is one such location in which mercury emissions from industrial sources are significant and regional mercury transport needs to be further examined. Speciated atmospheric mercury was measured in Chicago, IL and Holland, MI from July to November 2007 to better characterize the impact of Chicago/Gary on southwest Michigan. Previous work under the 1994-1995 Lake Michigan Mass Balance Study (LMMBS) indicated that the highest levels of mercury deposition in southwest Michigan occurred with transport from the Chicago/Gary area, particularly with rapid transport where less mercury was deposited close to sources(1). However, at that time it was not possible to measure reactive gas phase mercury (RGM), a highly-soluble form of mercury in industrial emissions that is readily removed from the atmosphere. Since the LMMBS, the development of speciated mercury systems has made it possible to continuously monitor gaseous elemental mercury (Hg0), particulate mercury (HgP), and RGM. These measurements are useful for understanding atmospheric mercury chemistry and differentiating between local and regional source impacts due to the different behaviors of reactive and elemental mercury. Results from 2007 show that, on average, Hg0 and HgP were 1.5 times higher and RGM was 2 times higher in Chicago than in Holland. Mean mercury wet deposition was nearly 3 times higher in Chicago than in Holland. Meteorological analysis indicates that transport across the lake from Chicago/Gary occurred frequently during the study. Additional measurements of O3, SO2, meteorological parameters, event mercury and trace element precipitation samples, and modeled back-trajectories are used to discern regional transport events from local deposition and characterize the impact of the Chicago/Gary urban

  12. Lake Michigan Fish Acoustic Data from 2011 to 2016

    Data.gov (United States)

    Department of the Interior — Each line in the file “Lake Michigan fish acoustic data from 2011 to 2016.csv” represents the acoustic data and estimated fish density for a single depth layer of...

  13. Michigan 2008 Lidar Coverage, USACE National Coastal Mapping Program

    Data.gov (United States)

    Army Corps of Engineers, Department of the Army, Department of Defense — The Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX) has performed a coastal survey along the MI coasts of Lake Superior, Lake Michigan and...

  14. Pavement subgrade MR design values for Michigan's seasonal changes : appendices.

    Science.gov (United States)

    2009-07-22

    The resilient modulus (MR) of roadbed soil plays an integral role in the design of pavement systems. Currently, the various regions of the Michigan Department of Transportation (MDOT) use different procedures to determine the MR values. Most of these...

  15. Lake-wide distribution of Dreissena in Lake Michigan, 1999

    Science.gov (United States)

    Fleischer, Guy W.; DeSorcie, Timothy J.; Holuszko, Jeffrey D.

    2001-01-01

    The Great Lakes Science Center has conducted lake-wide bottom trawl surveys of the fish community in Lake Michigan each fall since 1973. These systematic surveys are performed at depths of 9 to 110 m at each of seven index sites around Lake Michigan. Zebra mussel (Dreissena polymorpha) populations have expanded to all survey locations and at a level to sufficiently contribute to the bottom trawl catches. The quagga (Dreissena bugensis), recently reported in Lake Michigan, was likely in the catches though not recognized. Dreissena spp. biomass ranged from about 0.6 to 15 kg/ha at the various sites in 1999. Dreissenid mussels were found at depths of 9 to 82 m, with their peak biomass at 27 to 46 m. The colonization of these exotic mussels has ecological implications as well as potential ramifications on the ability to sample fish consistently and effectively with bottom trawls in Lake Michigan.

  16. Willow Run Laboratories: Separating from the University of Michigan

    Science.gov (United States)

    Walsh, John

    1972-01-01

    Outlines the reasons for, and the problems involved in, separation of a research center from the University of Michigan in order to become an independent research organization contracting for private and military research. (AL)

  17. Prostate Cancer Clinical Trials Group: The University of Michigan Site

    Science.gov (United States)

    2011-04-01

    2931 alhawary@umich.edu Stephanie Daignault, MS, Biostatistician, Biostatistics Core University of Michigan Comprehensive Cancer Center NI8D11...Consortium; The Cancer Institute of New Jersey/University of Medicine and Dentistry of New Jersey, New Brunswick, NJ; Robert Wood Johnson Medical School...University of Medicine and Dentistry of New Jersey, New Brunswick, NJ; University of Michigan, Ann Arbor, MI; University of Wisconsin Carbone

  18. Cardiac surgeons and the quality movement: the Michigan experience.

    Science.gov (United States)

    Prager, Richard L; Armenti, Frederick R; Bassett, Joseph S; Bell, Gail F; Drake, Daniel; Hanson, Eric C; Heiser, John C; Johnson, Scott H; Plasman, F B; Shannon, Francis L; Share, David; Theurer, Patty; Williams, Jaelene

    2009-01-01

    The Michigan Society of Thoracic and Cardiovascular Surgeons created a voluntary quality collaborative with all the cardiac surgeons in the state and all hospitals doing adult cardiac surgery. Utilizing this collaborative over the last 3 years and creating a unique relationship with a payor, an approach to processes and outcomes has produced improvements in the quality of care for cardiac patients in the state of Michigan.

  19. Socio-technical barriers to the use of energy-efficient timber drying technology in New Zealand

    International Nuclear Information System (INIS)

    Bell, Martha; Carrington, Gerry; Lawson, Rob; Stephenson, Janet

    2014-01-01

    This study of industrial energy behaviours identifies barriers to the use of energy-efficient drying technology in the New Zealand timber industry, and explores these barriers through the “energy cultures” lens. Vented kiln dryers were preferred by larger firms and heat pump kiln dryers were used by smaller firms. Although few firms could specify all their costs, we found no significant differences in the average operating costs, drying costs or commercial success of the larger and smaller firms. We found that socio-technical barriers create “energy cultures” at the level of both the firm and the sector, supporting the dominance of vented kiln dryers. The prevailing technologies, practices and norms at the sector level strongly support vented kilns, the status quo being embedded in the socio-technical context, hindering technological learning, improved energy efficiency and innovation. Influential stakeholders in the industry were thus part of, and locked into, the industry-wide energy culture, and were not in a position to effect change. We conclude that actors external to the prevailing industry energy culture need to leverage change in the industry norms, practices and/or technologies in order to reap the advantages of energy-efficient drying technology, assist its continued evolution and avoid the risks of path-dependency. - Highlights: • Firms processing timber in New Zealand use two main drying technologies. • Relatively inefficient vented dryers dominate over energy-efficient heat pumps. • Operating costs are similar but the socio-technical regime supports vented dryers. • Stasis is created by fixed energy cultures both within firms and across the sector. • Stasis hampers technical development in heat pump drying and business innovation

  20. Performance of Sprayed Fiber Reinforced Polymer Strengthened Timber Beams

    Directory of Open Access Journals (Sweden)

    S. Talukdar

    2010-01-01

    Full Text Available A study was carried out to investigate the use of Sprayed Fiber Reinforced Polymer (SFRP for retrofit of timber beams. A total of 10-full scale specimens were tested. Two different timber preservatives and two different bonding agents were investigated. Strengthening was characterized using load deflection diagrams. Results indicate that it is possible to enhance load-carrying capacity and energy absorption characteristics using the technique of SFRP. Of the two types of preservatives investigated, the technique appears to be more effective for the case of creosote-treated specimens, where up to a 51% improvement in load-carrying capacity and a 460% increase in the energy absorption capacity were noted. Effectiveness of the bonding agent used was dependent on the type of preservative the specimen had been treated with.

  1. Seismic Strengthening of Carpentry Joints in Traditional Timber Structures

    International Nuclear Information System (INIS)

    Parisi, Maria A.; Cordie, Cinzia; Piazza, Maurizio

    2008-01-01

    The static and dynamic behavior of timber structures largely depends on their connections. In traditional timber construction, elements are usually connected with carpentry joints based on contact pressure and friction, often with only minor reinforcement generically intended to avoid disassembling. In current practice, interventions for the upgrading of carpentry joints are mainly based on empirical knowledge according to tradition. Often they produce a general strengthening of the connection, but are not specific for the case of seismic action. Strengthening on heuristic bases may be only partially effective or possibly disproportioned. The behavior of the carpentry joints most used in roof structures is examined. The birdsmouth joint, connecting rafters to the tie beam, has been studied first, characterizing its behavior numerically and experimentally in monotonic and cyclic conditions. Other forms of the rafter-to-tie connection, the double notch joint and the case of parallel rafters, are discussed. Some general criteria for the seismic strengthening of these joints are presented

  2. Robustness Analysis of Typologies of Reciprocal Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Parigi, Dario

    2013-01-01

    to the future development of typologies of reciprocal timber structures. The paper concludes that these kinds of structures can have a potential as long span timber structures in real projects if they are carefully designed with respect to the overall robustness strategies.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern building...... codes consider the need for robustness in structures and provides strategies and methods to obtain robustness. Therefore a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper outlines robustness issues related...

  3. Seismic Strengthening of Carpentry Joints in Traditional Timber Structures

    Science.gov (United States)

    Parisi, Maria A.; Cordié, Cinzia; Piazza, Maurizio

    2008-07-01

    The static and dynamic behavior of timber structures largely depends on their connections. In traditional timber construction, elements are usually connected with carpentry joints based on contact pressure and friction, often with only minor reinforcement generically intended to avoid disassembling. In current practice, interventions for the upgrading of carpentry joints are mainly based on empirical knowledge according to tradition. Often they produce a general strengthening of the connection, but are not specific for the case of seismic action. Strengthening on heuristic bases may be only partially effective or possibly disproportioned. The behavior of the carpentry joints most used in roof structures is examined. The birdsmouth joint, connecting rafters to the tie beam, has been studied first, characterizing its behavior numerically and experimentally in monotonic and cyclic conditions. Other forms of the rafter-to-tie connection, the double notch joint and the case of parallel rafters, are discussed. Some general criteria for the seismic strengthening of these joints are presented.

  4. Assessing radiation doses to the public from radionuclides in timber and wood products

    International Nuclear Information System (INIS)

    2003-10-01

    radionuclides in wood, especially after the Chernobyl accident. In the Former Soviet Union countries, provisional standards for long lived radionuclide levels in wood used for different industrial and domestic purposes have been established since 1986 and regularly updated. Some national scenarios of timber processing and use were modelled to substantiate these standards. In January 1996, a system of certification of commodities was implemented in the Russian Federation whereby the activity concentration of 137 Cs and 90 Sr in timber to be exported has to be measured and specified. According to this system, any portion of timber released from contaminated areas must meet national standards. In the event of a nuclear accident involving the release of radionuclides to the biosphere the radioactive contamination of forests can become a significant potential source of public radiation exposure. Two of these accidents - the Kyshtim accident, Urals, USSR (now Russian Federation) in 1957 and the Chernobyl accident, USSR (now Ukraine), in 1986 - resulted in significant contamination of thousands of square kilometres of forested areas with mixtures of radionuclides including long lived fission products such as 137 Cs and 90 Sr. Measurements and modelling of forest ecosystems after both accidents have shown that, following initial contamination, the activity concentration of long lived radionuclides in wood gradually increases over one to two decades and then slowly decreases in the subsequent period. The longevity of the contamination is due to the slow migration and persistent bioavailability of radionuclides in the forest soil profile, which results in long term transfer into wood through the root system of the trees. Another source of contamination is from global radioactive fallout after nuclear weapons tests, but the level of contamination is much lower than that from, for example, the Chernobyl accident. For instance, the level of 137 Cs in wood in Sweden is about 2-5 Bq kg -1

  5. Timber productivity research gaps for extensive forest management

    Science.gov (United States)

    L.C. Irland

    2011-01-01

    On extensive areas of small scale forests, significant opportunities for improving the value of future timber harvests while also improving other resource values are now being missed. A new focus on practical extensive management research is needed, especially as implementation of intensive practices has been declining in many areas, and new ‘‘close to nature’’...

  6. The supply and demand situation for oak timber

    Science.gov (United States)

    Kenneth L. Quigley

    1971-01-01

    Twenty oak species in the eastern United States account for one-third of the hardwood sawtimber volume and almost 10 percent of both hardwood and softwood growing-stock volume. The oak-hickory and oak-pine forest types occupy about 38 percent of the forest land in the eastern United States. Oak timber volume is increasing. Annual growth exceeds annual removals by about...

  7. Long-term Deformation Measurements of Atypical Roof Timber Structures

    Directory of Open Access Journals (Sweden)

    Jiří Bureš

    2014-06-01

    Full Text Available The paper includes conclusions from evaluation of results obtained from long-termmeasuring of innovative atypical roof timber structures. Based on the results ofmeasurements of vertical and horizontal deformation components it is possible to analyzethe real behavior of structures in given conditions. By assessing deformations in variousstages, including particularly external and internal environment temperatures, relative airhumidity and moisture content of wood, decisive parameters for real structure behaviorcan be established. The data are processed from period 2001 – 2013.

  8. WELFARE IMPLICATIONS OF TIMBERLAND OWNERSHIP CHANGES IN THE U.S. TIMBER MARKETS

    Directory of Open Access Journals (Sweden)

    Mohammad Mahfuzur Rahman

    2016-07-01

    Full Text Available In the last two decades, many forest product firms in the U.S. either divested their timberlands to timber investment management organizations (TIMOs and conservation organizations or converted their corporate structures from C corporations to real estate investment trusts (REITs. All landowners sold smaller timberland tracts for nonforestry uses. Reduced timber supplies from conservation organizations and timberland loss to other nonforestry uses have consequences on producer and consumer surpluses in the U.S. timber markets. Equilibrium displacement model has been employed to evaluate the welfare changes in U.S. timber markets attributed to timberland ownership changes. Net reduction of timber supply contributed to the reduction of social surplus by $43 million in 2006. Compared to the $33 billion plus U.S. timber markets, this welfare reduction was small. Overall, this article explains the shifts of economic surpluses among producers and net surplus reduction for the society attributed to timberland ownership changes in the United States.

  9. Geology, Burnst Timber Creek, west of fifth meridian, Alberta

    Energy Technology Data Exchange (ETDEWEB)

    1966-01-01

    The Burnt Timber Creek map-area lies in the southern Foothills of Alberta and includes a narrow strip of the Front Range of the Rocky Mts. along its western edge. The area may be divided into 3 principal structural units, underlain from west to east by the McConnell, Burnt Timber, and Fallentimber thrusts, respectively. McConnell thrust underlies the eastern edge of the mountains. Subsidiary folding and faulting are locally evident in the Paleozoic strata above the thrust. Beneath the McConnell thrust, Mesozoic and Paleozoic strata of the Burnt Timber thrust sheet are strongly overturned in the Panther anticline. The axis of this anticline trends northwest. A culmination along it, in the vicinity of Sheep Creek, deforms the McConnel thrust as well. A total of 16 wells have been drilled to date in 4 separate groups. Each group has revealed the presence of gas and 8 of the wells have been capped as potential gas producers. The reservoir rocks are of Mississippian and Devonian age. Shell Panther River No. 1 well (5-19-30-10W5) is remarkable in having tested at about 86% hydrogen sulfide.

  10. Robustness Analysis of a Wide-Span Timber Structure with Ductile Behaviour

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Cizmar, D.

    2010-01-01

    This paper considers robustness evaluation of a wide span timber truss structure where the ductile behavior is taken into account. The robustness analysis is based on a structural reliability framework used on a simplified mechanical system modelling a timber truss system. A measure of ductile...... behaviour is introduced and for different values of this measure the robustness indices are estimated. The results indicate that the robustness of a timber truss system can be increased by taking the ductile behavior into....

  11. Characteristics of Timbers Dried Using Kiln Drying and Radio Frequency-Vacuum Drying Systems

    OpenAIRE

    Rabidin Zairul Amin; Seng Gan Kee; Wahab Mohd Jamil Abdul

    2017-01-01

    Heavy hardwoods are difficult-to-dry timbers as they are prone to checking and internal stresses when dried using a conventional kiln drying system. These timbers are usually dried naturally to reach 15% to 19% moisture content with an acceptable defects. Besides long drying time, timbers at these moisture contents are not suitable for indoor applications since they will further dry and causing, for example, jointing and lamination failures. Drying to a lower moisture content could only be ac...

  12. Development of Hybrid Kiln Drying System with Radio Frequency Heating for the Sugi Heart Timber

    OpenAIRE

    Piao, Jinji; Fujimoto, Noboru; Yamamoto, Yasushi; Nagata, Soji

    2007-01-01

    In this study, proper applied stage of the radio-frequency (RF) heating during kiln drying based on the quality concerning the surface checks of the boxed heart timbers was examined. At the stage of the RF heating the moisture contents decreased clearly at the internal parts of timbers. The surface stress of the sugi (Cryptomeria japonica D. Don) boxed heart timber changed into the compression stress by the RF heating in any drying stage. The surface checks increased according to the decrease...

  13. Outgrower timber schemes in KwaZulu-Natal – Do they build sustainable rural livelihoods and what interventions should be made?

    CSIR Research Space (South Africa)

    Cairns, RI

    2000-01-01

    Full Text Available Small-scale timber growers access commercial timber markets in KwaZulu-Natal through three mechanisms. These are; highly structured contractual arrangements (SAPPI, Lima and Mondi); membership in commercial forest-owners associations or timber...

  14. Fire Resistance of Large-Scale Cross-Laminated Timber Panels

    Science.gov (United States)

    Henek, Vladan; Venkrbec, Václav; Novotný, Miloslav

    2017-12-01

    Wooden structures are increasingly being used in the construction of residential buildings. A common and often published reason to avoid wooden structures is their insufficient fire resistance, which reduces bearing capacity. For this reason, composite sandwich structures began to be designed to eliminate this drawback, as well as others. Recently, however, the trend is for a return to the original, wood-only variant and a search is underway for new technical means of improving the properties of such structures. Many timber structure technologies are known, but structures made from cross-laminated timber (CLT) panels have been used very often in recent years. CLT panels, also known as X-LAM, are currently gaining popularity in Europe. In the case of CLT panels composed of several layers of boards, they can be said to offer a certain advantage in that after the surface layer of a board has burnt and the subsurface layer has dried, oxygen is not drawn to the unburned wood for further combustion and thus the burning process ceases. CLT panels do not need to be specially modified or coated with fire resistant materials, although they are usually lined with gypsum-fibre fire resistant boards due to guidelines set out in the relevant standards. This paper presents a new method for the assessment of load-bearing perimeter walls fabricated from CLT panels without the use of an inner fire-retardant lining to ensure fire resistance at the level required by European standards (i.e. those harmonized for the Czech construction industry). The calculations were verified through laboratory tests which show that better parameters can be achieved during the classification of structures from the fire resistance point of view. The aim of the article is to utilize the results of assessment and testing by an accredited laboratory in order to demonstrate the possibilities of using CLT panels for the construction of multistorey as well as multi-purpose buildings in the Czech Republic.

  15. Mortality rates among Arab Americans in Michigan.

    Science.gov (United States)

    Dallo, Florence J; Schwartz, Kendra; Ruterbusch, Julie J; Booza, Jason; Williams, David R

    2012-04-01

    The objectives of this study were to: (1) calculate age-specific and age-adjusted cause-specific mortality rates for Arab Americans; and (2) compare these rates with those for blacks and whites. Mortality rates were estimated using Michigan death certificate data, an Arab surname and first name list, and 2000 U.S. Census data. Age-specific rates, age-adjusted all-cause and cause-specific rates were calculated. Arab Americans (75+) had higher mortality rates than whites and blacks. Among men, all-cause and cause-specific mortality rates for Arab Americans were in the range of whites and blacks. However, Arab American men had lower mortality rates from cancer and chronic lower respiratory disease compared to both whites and blacks. Among women, Arab Americans had lower mortality rates from heart disease, cancer, stroke, and diabetes than whites and blacks. Arab Americans are growing in number. Future study should focus on designing rigorous separate analyses for this population.

  16. Timber Regulation and Value Chain in Community-Based Timber Enterprise and Smallholder Forestry in the Philippines

    Directory of Open Access Journals (Sweden)

    Juan M. Pulhin

    2016-07-01

    Full Text Available Forest tenure reform has no doubt attained significant gains in promoting social justice and equity in the forest sector, through legal recognition of the communities’ property rights over forest lands in many developing countries. This includes the right to harvest and market trees that the communities planted. Along these lines, the Philippines’ community-based forest management (CBFM and smallholder forestry have the potential to meet the country’s wood demand and contribute to its poverty alleviation goal. Realities on the ground, however, make this lofty aspiration seems too far-fetched. Formal and informal barriers along the timber value chain restrict the growth and obstruct opportunities for community-based timber enterprises (CBTEs and smallholder forestry. Using the case of CBFM and smallholder forestry in the Visayas and Mindanao Islands in the Philippines, respectively, this paper examines the hurdles posed by regulations and informal practices, such as restrictive policies and increased transaction costs, through a segment analysis of the timber value chain. It argues that failure to address these barriers would lead to the decline of CBTEs and smallholder enterprises, thus undermining the merits of the forest tenure reform.

  17. Environmental status of the Lake Michigan region. Volume 3. Chemistry of Lake Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Torrey, M S

    1976-05-01

    The report is a synoptic review of data collected over the past twenty years on the chemistry of Lake Michigan. Changes in water quality and sediment chemistry, attributable to cultural and natural influences, are considered in relation to interacting processes and factors controlling the distribution and concentration of chemical substances within the Lake. Temperature, light, and mixing processes are among the important natural influences that affect nutrient cycling, dispersal of pollutants, and fate of materials entering the Lake. Characterization of inshore-offshore and longitudinal differences in chemical concentrations and sediment chemistry for the main body of the Lake is supplemented by discussion of specific areas such as Green Bay and Grand Traverse Bay. Residues, specific conductance, dissolved oxygen, major and trace nutrients, and contaminants are described in the following context: biological essentiality and/or toxicity, sources to the Lake, concentrations in the water column and sediments, chemical forms, seasonal variations and variation with depth. A summary of existing water quality standards, statutes, and criteria applicable to Lake Michigan is appended.

  18. Environmental status of the Lake Michigan region. Volume 14. Birds of the Lake Michigan drainage basin

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, G.J.

    1977-07-01

    This report characterizes the bird life found in 100 counties of the four states peripheral to Lake Michigan. It discusses major habitats (the Lake Michigan shoreline, inland lakes, rivers and streams, marshes, fields and open spaces, and woodlots) and associates specific birds with habitats according to preferences for space and food. It also discusses the special attributes of state parks and lakeshores, refuges and sanctuaries, and other special areas which are attractive to avifauna. Patterns of historical occurrence and abundance, and the influence of pesticides and pollution, disease, and hunting pressure are explored to place present occurrence in a modern perspective. Migration patterns are discussed to explain increases and decreases which occur in nonresident avifauna of the Basin. The distribution and habits of birds that occur regularly in the Basin are described in an annotated list; a more complete list is presented in a table which encapsulates data for rapid and convenient reference. Separate sections deal with extinct, extirpated, and introduced species, and with endangered, threatened, and declining species.

  19. Local bladder cancer clusters in southeastern Michigan accounting for risk factors, covariates and residential mobility.

    Directory of Open Access Journals (Sweden)

    Geoffrey M Jacquez

    Full Text Available In case control studies disease risk not explained by the significant risk factors is the unexplained risk. Considering unexplained risk for specific populations, places and times can reveal the signature of unidentified risk factors and risk factors not fully accounted for in the case-control study. This potentially can lead to new hypotheses regarding disease causation.Global, local and focused Q-statistics are applied to data from a population-based case-control study of 11 southeast Michigan counties. Analyses were conducted using both year- and age-based measures of time. The analyses were adjusted for arsenic exposure, education, smoking, family history of bladder cancer, occupational exposure to bladder cancer carcinogens, age, gender, and race.Significant global clustering of cases was not found. Such a finding would indicate large-scale clustering of cases relative to controls through time. However, highly significant local clusters were found in Ingham County near Lansing, in Oakland County, and in the City of Jackson, Michigan. The Jackson City cluster was observed in working-ages and is thus consistent with occupational causes. The Ingham County cluster persists over time, suggesting a broad-based geographically defined exposure. Focused clusters were found for 20 industrial sites engaged in manufacturing activities associated with known or suspected bladder cancer carcinogens. Set-based tests that adjusted for multiple testing were not significant, although local clusters persisted through time and temporal trends in probability of local tests were observed.Q analyses provide a powerful tool for unpacking unexplained disease risk from case-control studies. This is particularly useful when the effect of risk factors varies spatially, through time, or through both space and time. For bladder cancer in Michigan, the next step is to investigate causal hypotheses that may explain the excess bladder cancer risk localized to areas of

  20. Furniture Industry in Kenya : Situational Analysis and Strategy

    OpenAIRE

    Creapo Oy; World Bank Group

    2015-01-01

    The Government of Kenya recognizes that the performance of the furniture sector is crucial both to employment and growth in the country. The Ministry of Industrialization and Enterprise Development (MOIED) therefore requested an analysis of both the furniture and timber sectors, in order to understand their current state of development, their main constraints, and the interventions necessa...

  1. MICHIGAN/INDIANA: Siberian Snakes strike again

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Full text: Siberian snakes are showing themselves to be even more deadly than expected in killing their prey, the depolarizing resonances which would make it very difficult to accelerate polarized protons to TeV energies at accelerators such as the Tevatron, UNK, LHC, and SSC. The snake concept was proposed in the mid-1970s by Siberians Yaroslav Derbenev and Anatoly Kondratenko at Novosibirsk, but the snakes lay almost dormant until Owen Chamberlain, Ernest Courant, Alan Krisch, and the late Kent Terwilliger organized the 1985 Superconducting Supercollider (SSC) polarized beam workshop in Ann Arbor, which highlighted the need to test the concept. The idea is to rotate the spin through 180° on each turn in the ring. With such successive spin flips, the depolarizing effects seen in one turn should be cancelled by an equal and opposite perturbation on the subsequent turn. The new Cooler Ring at the Indiana University Cyclotron Facility then seemed an excellent test site for these eager but untested serpents. The Michigan/lndiana/Brookhaven team led by Krisch constructed the world's first snake and found that it could easily overcome its initial enemy, the imperfection depolarizing resonances caused by ring magnet imperfections (January/February 1990, page 20). In the next few years the growing team of ''herpetologists'' showed that Siberian snakes could overcome all kinds of depolarizing resonances, including the intrinsic kind (caused by the vertical betatron oscillations which keep the beam focused) and the synchrotron resonances (caused by synchrotron oscillations in energy). The team also discovered a new type of snake that was inadvertently built into the cooling section. This socalled type-3 snake rotates the spin around the vertical direction. A full type-1 snake (such as the team's superconducting solenoid magnet) rotates the spin by 180° around the beam direction; a type-2 snake rotates the spin around the radial direction

  2. Flood of April 1975 at Williamston, Michigan

    Science.gov (United States)

    Knutilla, R.L.; Swallow, L.A.

    1975-01-01

    On April 18 between 5 p.m. and 12 p.m. the city of Williamston experienced an intense rain storm that caused the Red Cedar River and the many small streams in the area to overflow their banks and resulted in the most devastating flood since at least 1904. Local officials estimated a loss of \\$775,000 in property damage. Damage from flooding by the Red Cedar River was caused primarily by inundation, rather than by water moving at high velocity, as is common when many streams are flooded. During the flood of April 1975 many basements were flooded as well as the lower floors of some homes in the flood plain. Additional damage occurred in places when sewers backed up and flooded basements, and when ground water seeped through basement walls and floors—situations that affected many homes including those that were well outside of the flood plain.During the time of flooding the U.S. Geological Survey obtained aerial photography and data on a streamflow to document the disaster. This report shows on a photomosaic base map the extent of flooding along the Red Cedar River at Williamston, during the flood. It also presents data obtained at stream-gaging stations near Williamston, as well as the results of peak-flow discharge measurements made on the Red Cedar River at Michigan State Highway M-52 east of the city. Information on the magnitude of the flood can guide in making decisions pertaining to the use of flood-plains in the area. It is one of a series of reports on the April 1975 flood in the Lansing metropolitan area.

  3. 76 FR 36145 - Notice of Inventory Completion: Western Michigan University, Department of Anthropology...

    Science.gov (United States)

    2011-06-21

    ...: Western Michigan University, Department of Anthropology, Kalamazoo, MI AGENCY: National Park Service, Interior. ACTION: Notice. SUMMARY: Western Michigan University, Department of Anthropology, has completed..., Department of Anthropology. Disposition of the human remains and associated funerary objects to the Indian...

  4. 75 FR 67998 - Notice of Inventory Completion: Western Michigan University, Anthropology Department, Kalamazoo, MI

    Science.gov (United States)

    2010-11-04

    ... University, Anthropology Department, Kalamazoo, MI AGENCY: National Park Service, Interior. ACTION: Notice... objects in the possession of Western Michigan University, Anthropology Department, Kalamazoo, MI. The... anthropologist in the Anthropology Department at Western Michigan University, studied the remains. Native...

  5. 75 FR 5105 - Notice of Inventory Completion: Western Michigan University, Anthropology Department, Kalamazoo, MI

    Science.gov (United States)

    2010-02-01

    ... University, Anthropology Department, Kalamazoo, MI AGENCY: National Park Service, Interior. ACTION: Notice... objects in the possession of Western Michigan University, Anthropology Department, Kalamazoo, MI. The... analysis. Dr. Robert Sundick, a physical anthropologist in the Anthropology Department at Western Michigan...

  6. 76 FR 28078 - Notice of Inventory Completion: Western Michigan University, Anthropology Department, Kalamazoo, MI

    Science.gov (United States)

    2011-05-13

    ...: Western Michigan University, Anthropology Department, Kalamazoo, MI AGENCY: National Park Service, Interior. ACTION: Notice. SUMMARY: Western Michigan University, Anthropology Department, has completed an... University, Anthropology Department. Disposition of the human remains and associated funerary objects to the...

  7. 75 FR 36671 - Notice of Inventory Completion: Western Michigan University, Anthropology Department, Kalamazoo, MI

    Science.gov (United States)

    2010-06-28

    ... University, Anthropology Department, Kalamazoo, MI AGENCY: National Park Service, Interior. ACTION: Notice... objects in the possession of Western Michigan University, Anthropology Department, Kalamazoo, MI. The... funerary objects should contact LouAnn Wurst, Department of Anthropology, Western Michigan University, 1005...

  8. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Michigan. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Michigan.

  9. Friction welding of wood – A fast, adhesive-free bonding technology for prefabricated elements in timber construction

    OpenAIRE

    Hahn, Benjamin; Hatt, Fred

    2013-01-01

    Up to now chemical adhesives based on polyurethane are used for the assembling of timber planks to large-scale structural elements, in particular cross-laminated timber panels (CLT), which opened new possibilities for architects and engineers in timber construction. The use of these adhesives still implicates, beside others, concerns about their impact on health and environment during application as well for later disposal. In order to overcome the geometrical limitations of timber by maintai...

  10. Oxalic acid as an assisting agent for the electrodialytic remediation of chromated copper arsenate treated timber waste

    DEFF Research Database (Denmark)

    Ribeiro, Alexandra B.; Mateus, Eduardo P.; Ottosen, Lisbeth M.

    1999-01-01

    The electrodialytic process is proposed as a technique for the remediation of chromated copper arsenate treated timber waste, using oxalic acid as assisting agent. The method prowed succesfull 93% Cu, 95% Cr and 99% As was removed from the timber.......The electrodialytic process is proposed as a technique for the remediation of chromated copper arsenate treated timber waste, using oxalic acid as assisting agent. The method prowed succesfull 93% Cu, 95% Cr and 99% As was removed from the timber....

  11. Geology and salt deposits of the Michigan Basin

    International Nuclear Information System (INIS)

    Johnson, K.S.; Gonzales, S.

    1976-07-01

    The Silurian-age Salina salt, one of the greatest deposits of bedded rock salt in the world, underlies most of the Michigan basin and parts of the Appalachian basin in Ohio. Pennsylvania, New York, and West Virginia. Interest in this salt deposit has increased in recent years because there may be one or more areas where it could be used safely as a repository for the underground storage of high-level radioactive wastes. The general geology of the Michigan basin is summarized and the major salt deposits are described in the hope that these data will be useful in determining whether there are any areas in the basin that are sufficiently promising to warrant further detailed study. Distribution of the important salt deposits in the basin is limited to the Southern Peninsula of Michigan

  12. SOFRA and RPA: two views of the future of southern timber supply.

    Science.gov (United States)

    Darius Adams; John Mills; Ralph Alig; Richard. Haynes

    2005-01-01

    Two recent studies provide alternative views of the current state and future prospects of southern forests and timber supply: the Southern Forest Resource Assessment (SOFRA) and the Fifth Resources Planning Act Timber Assessment (RPA). Using apparently comparable data but different models and methods, the studies portray futures that in some aspects are quite similar...

  13. Development of a smart timber bridge girder with fiber optic sensors

    Science.gov (United States)

    James Wacker; Ursula Deza; Brent M. Phares; Terry J. Wipf

    2010-01-01

    Past timber bridge evaluation and maintenance efforts in the USA have principally focused on the internal integrity of timber components using various non-destructive evaluation tools to supplement visual inspection data. This project is part of a comprehensive effort to develop smart structure concepts for improving the long-term performance, maintenance, and...

  14. Market of innovative timber products in Europe and Serbia and their contribution to climate change mitigation

    Directory of Open Access Journals (Sweden)

    Sretenović Predrag

    2014-01-01

    Full Text Available The paper shows results of researching the market of glued laminated timber as the most frequent innovative timber product in constructing timber framed residential facilities in Europe and Serbia. The research included the development of production, consumption and trade flows for the most significant countries in the European Union and Serbia. Additionally, the paper gives characteristics of this innovative timber product regarding dimensions, allowed deviations of dimensions defined in adequate European standard, wood species it is made of and fire resistance. The last part of the paper shows results of econometric modeling of the impact of building timber-framed houses on the consumption of glued laminated timber in Austria as one of the countries belonging to the group of the largest consumers of this innovative timber product in Europe. Taking into consideration that the substitution of classic building materials, primarily concrete, steel and aluminum, with glued laminated timber in residential construction contributes to the reduction of carbon-dioxide emission and climate change mitigation, research results of the effects of such substitution are presented in the last chapter in this paper. [Projekat Ministarstva nauke Republike Srbije, br. III43007: Istraživanje klimatskih promena na životnu sredinu: praćenje uticaja, adaptacija i ublažavanje

  15. Live-load performance evaluation of historic covered timber bridges in the United States

    Science.gov (United States)

    Junwon Seo; Travis K. Hosteng; Brent M. Phares; James P. Wacker

    2015-01-01

    The National Historic Covered Bridge Preservation Program (NHCBP), sponsored by the Federal Highway Administration (FHWA), was established to preserve the covered timber bridge structures that were constructed in the early 1800s. Today, many of the approximately 880 covered timber bridges still in existence in the United States are closed to vehicular traffic;...

  16. Simplified Analytical Model for a Queen-Post Covered Timber Bridge

    Science.gov (United States)

    F Fanous; D. Rammer; T. Wipf

    2013-01-01

    During the 19th century, the economic material to build bridges was timber due to its abundant availability, cost, and ease of construction. Many of the well-known timber bridge types are the Burr arch, Town lattice, Howe, Queen and King type of trusses. This paper summarizes an investigation that was sponsored by the Federal Highway Administration and the USDA Forest...

  17. Field performance of timber bridges. 7, Connell Lake stress-laminated deck bridge

    Science.gov (United States)

    L. E. Hislop; M. A. Ritter

    The Connell Lake bridge was constructed in early 1991 on the Tongass National Forest, Alaska, as a demonstration bridge under the Timber Bridge Initiative. The bridge is a stress-laminated deck structure with an approximate 36-ft length and 18-ft width and is the first known stress-laminated timber bridge constructed in Alaska. Performance of the bridge was monitored...

  18. The Economics of Timber Supply: An Analytical Synthesis of Modeling Approaches

    Science.gov (United States)

    David N. Wear; Peter J. Parks

    1994-01-01

    The joint supply of timber and other services from forest environments plays a central role in most forest land debates. This paper defines a general conceptual model of timber supply that provides the context for discussing both individual harvest choice and aggregate supply models. While the structure and breadth of these models has developed considerably over the...

  19. Nondestructive assessment of single-span timber bridges using a vibration- based method

    Science.gov (United States)

    Xiping Wang; James P. Wacker; Angus M. Morison; John W. Forsman; John R. Erickson; Robert J. Ross

    2005-01-01

    This paper describes an effort to develop a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the natural frequency of single-span timber bridges in the laboratory and field. An analytical model based on simple beam theory was proposed to represent the relationship...

  20. Responses of timber rattlesnakes to fire: Lessons from two prescribed burns

    Science.gov (United States)

    Steven J. Beaupre; Lara E. Douglas

    2012-01-01

    Timber rattlesnakes (Crotalus horridus) are excellent model organisms for understanding the effects of large scale habitat manipulations because of their low-energy lifestyle, rapid response to changes in resource environment, uniform diet (small mammals), and simple behaviors. We present two case studies that illustrate interactions between timber...

  1. Expanding the scale of forest management: allocating timber harvests in time and space

    Science.gov (United States)

    Eric J. Gustafson

    1996-01-01

    This study examined the effect of clustering timber harvest zones and of changing the land use categories of zones (dynamic zoning) over varying temporal and spatial scales. Focusing on the Hoosier National Forest (HNF) in Indiana, USA as a study area, I used a timber harvest allocation model to simulate four management alternatives. In the static zoning alternative,...

  2. Service life assessment of timber highway bridges in USA climate zones

    Science.gov (United States)

    James P. Wacker; Brian K. Brashaw; Thomas G. Williamson; P. David Jones; Matthew S. Smith; Travis K. Hosteng; David L. Strahl; Lola E. Coombe; V.J. Gopu

    2014-01-01

    As engineers begin to estimate life-cycle costs and sustainable design approaches for timber bridges, there is a need for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This...

  3. Sustainable forest management of tropical forests can reduce carbon emissions and stabilize timber production

    Science.gov (United States)

    N. Sasaki; G.P. Asner; Yude Pan; W. Knorr; P.B. Durst; H.O. Ma; I. Abe; A.J. Lowe; L.P. Koh

    2016-01-01

    The REDD+ scheme of the United Nations Framework Conventionon Climate Change has provided opportunities to manage tropical forests for timber production and carbon emission reductions. To determine the appropriate loggingtechniques, we analyzed potential timber production and carbon emission reductions under two logging techniques over a 40-year period of selective...

  4. 36 CFR 223.195 - Procedures for identifying and marking unprocessed timber.

    Science.gov (United States)

    2010-07-01

    ... procedures required herein. (f) Waiver of branding requirements. Regional Foresters may waive the branding... individual timber sale basis, all or a portion of the branding requirements pursuant to paragraph (c)(2) of...) Regions 5 and 6. On an individual timber sale basis, the branding requirement pursuant to paragraph (c)(2...

  5. 3 CFR - Establishment of the Interagency Committee on Trade in Timber Products from Peru and Assignment...

    Science.gov (United States)

    2010-01-01

    ... in Timber Products from Peru and Assignment of Function under Section 501 of the United States-Peru... Memorandum of May 1, 2009 Establishment of the Interagency Committee on Trade in Timber Products from Peru and Assignment of Function under Section 501 of the United States-Peru Trade Promotion Agreement...

  6. Concurring Regulation in European Forest Law; Forest Certification and the New EU Timber Regulation

    NARCIS (Netherlands)

    Kistenkas, F.H.

    2013-01-01

    Newly made EU Timber Regulation (EUTR) may prima facie look like competing regulation and an overlap of the existing forest certification schemes of FSC and PEFC as also EUTR combats illegally harvested timber. The novel EUTR, however, is a public law scheme wheras FSC and PEFC are private law

  7. Laboratory investigation of fire protection coatings for creosote-treated timber railroad bridges

    Science.gov (United States)

    Carol A. Clausen; Robert H. White; James P. Wacker; Stan T. Lebow; Mark A. Dietenberger; Samuel L. Zelinka; Nicole M. Stark

    2014-01-01

    As the incidence of timber railroad bridge fires increases, so has the need to develop protective measures to reduce the risk from accidental ignitions primarily caused by hot metal objects. Of the six barrier treatments evaluated in the laboratory for their ability to protect timbers from fires sourced with ignition from hot metal objects only one intumescent coating...

  8. Timber bridge evaluation : a global nondestructive approach using impact generated FRFs

    Science.gov (United States)

    Angus Morison; C.D. Van Karsen; H.A. Evensen; J.B. Ligon; J.R. Erickson; R.J. Ross; J.W. Forsman

    2002-01-01

    Bridges require periodic inspections to ensure the safety of those using the structure. A visual inspection has historically been the most common form of investigation for timber bridges. This poses many problems when inspecting bridge timbers since often the damage is internal, leaving no visible signs of decay on the surface. Localized nondestructive evaluation (NDE...

  9. Computer software to estimate timber harvesting system production, cost, and revenue

    Science.gov (United States)

    Dr. John E. Baumgras; Dr. Chris B. LeDoux

    1992-01-01

    Large variations in timber harvesting cost and revenue can result from the differences between harvesting systems, the variable attributes of harvesting sites and timber stands, or changing product markets. Consequently, system and site specific estimates of production rates and costs are required to improve estimates of harvesting revenue. This paper describes...

  10. The effects of population growth on timber management and inventories in Virginia

    Science.gov (United States)

    David N. Wear; Rei Liu; J. Michael Foreman; Raymond M. Sheffield

    1999-01-01

    Expanding human populations may have important effects on the availability of timber from private lands in the South. To examine the effects of development on timber supply, the authors compared the density of populations and various site variables with expert opinions on the future location of commercial timberland for a study site in Virginia. Population density is a...

  11. NDE investigation of the timber foundation in the historic Kennecott Mine Concentration Mill Building

    Science.gov (United States)

    James P. Wacker; Xiping Wang; Douglas R. Rammer; Bessie M. Woodward

    2011-01-01

    The U.S. National Park Service acquired the National Historic Copper Mine at Kennecott, Alaska, in 1998. There was uncertainty about the condition of the timber-cribbing foundation supporting the concentration mill, the largest building in the mine complex. A comprehensive on-site evaluation of the timber cribbing foundation was performed in summer 2009. The inspection...

  12. Timber resource statistics for the San Joaquin and southern California resource areas.

    Science.gov (United States)

    Bruce Hiserote; Joel Moen; Charles L. Bolsinger

    1986-01-01

    This report is one of five that provide timber resource statistics for 57 of the 58 counties in California (San Francisco is excluded). This report presents statistics from a 1982-84 inventory of the timber resources of Alpine, Amador, Calaveras, Fresno, Imperial, Inyo, Kern, Kings, Los Angeles, Madera, Mariposa, Merced, Mono, Orange, Riverside, San Bernardino, San...

  13. Guidelines for the on-site assessment of historic timber structures

    NARCIS (Netherlands)

    Cruz, H.; Yeomans, D.; Tsakanika, E.; Macchioni, N.; Jorissen, A.J.M.; Touza, M.; Mannucci, M.; Lourenco, P.B.

    2014-01-01

    In the scope of COST IE0601-WoodCulther (http://www.woodculther.org) it was agreed to produce Guidelines for the Assessment of Historic Timber Structures, covering the principles and possible approaches for the safety assessment of old timber structures of historical relevance, that could be used as

  14. Development of flexural vibration inspection techniques to rapidly assess the structural health of timber bridge systems

    Science.gov (United States)

    Xiping Wang; James P. Wacker; Robert J. Ross; Brian K. Brashaw; Robert Vatalaro

    2005-01-01

    This paper describes an effort to develop a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the natural frequency of single-span timber bridges in the laboratory and field. An analytical model based on simple beam theory was proposed to represent the relationship...

  15. On calculating the pressure on cylindrical timbers of vertical shafts in clayey soils

    Energy Technology Data Exchange (ETDEWEB)

    Mizyumskii, V A

    1979-11-01

    In order to calculate the pressure built up on timbers which have been constructed to hold back freely moving soil in a clay environment, a formula is recommended which characterizes the state of clayey soil. The formula incorporates the parameters for volume information, momentary and long displacement modulus, decay factor of deformations of the after effect, viscosity factor in the starting zone of reforming. Because the timber creates a reaction pressure on the contour of the working, the radial travel of the timber is calculated and then the pressure on the timber. Correlation of the calculated pressure with the results of measurements in workings showed that the pressure of clayey soil on the timber is the result of viscous flow deformations. Disregarding these deformations, the pressures on the shaft timbering in the Yuzhno-Belozerskii deposit were calculated at 0.004 and 0.006 tons/m/sup 2/ respectively at a depth of 90 and 142 meters. After reworking the soil and setting up timbering the pressure was calculated at 2/3 of that of the highest measurements. The formula suggested is suitable for determining pressure on timbers having a large creep. (12 refs.) (In Russian)

  16. Splitting behaviour of timber loaded perpendicular to the grain by punched metal plates

    NARCIS (Netherlands)

    Schoenmakers, J.C.M.; Jorissen, A.J.M.; Leijten, A.J.M.; Aratake, S. xx

    2008-01-01

    Nowadays, prefabricated timber trusses are widely used as load-bearing roof structures. The majority of these trusses are produced with punched metal plates (PMP) to connect two or more timber elements of the same thickness, see Figure 2. In these structures sufficient overlap is required to prevent

  17. Dowel-type fastener connections in timber structures subjected to short-term loading

    DEFF Research Database (Denmark)

    Lauritzen Jensen, J.

    Design of dowel-type fastener connections in framed timber structures usually involves a two-step analysis: determination of the distribution of the sectional forces, and design of the eccentrically loaded connections. This report presents an integrated model for design of framed timber structures...

  18. Time-of-Flight Adjustment Procedure for Acoustic Measurements in Structural Timber

    Science.gov (United States)

    Danbiel F. Llana; Guillermo Iñiguez-Gonzalez; Francisco Arriaga; Xiping Wang

    2016-01-01

    The effect of timber length on time-of-flight acoustic longitudinal measurements was investigated on the structural timber of four Spanish species: radiata pine (Pinus radiata D. Don), Scots pine (Pinus sylvestris L.), laricio pine (Pinus nigra Arn.), and maritime pine (Pinus pinaster Ait.). Time-of-flight longitudinal measurements were conducted on 120 specimens of...

  19. Compressive capacity perpendicular to grain of fully supported timber beams of Poplar - model comparison

    NARCIS (Netherlands)

    Leijten, A.J.M.; Haddad, Y.M.

    2015-01-01

    In timber frame structures, for both residential and multi-storey purposes, timber elements are loaded perpendicular to grain. In the past, structural design code calculations were based on pre-set permissible strength values, applying empirical models with obscure background. Modern ultimate limit

  20. Structural attributes of two old-growth Cross Timbers stands in western Arkansas

    Science.gov (United States)

    Don C. Bragg; David W. Stahle; K. Chris Cerny

    2012-01-01

    Comprised of largely non-commercial, xeric, oak-dominated forests, the Cross Timbers in Arkansas have been heavily altered over the last two centuries, and thus only scattered parcels of old-growth timber remain. We inventoried and mapped two such stands on Fort Chaffee Military Training Center in Sebastian County, Arkansas. The west-facing Christmas Knob site is...

  1. Elementary and advanced modelling of the splitting strength of timber connections

    NARCIS (Netherlands)

    Schoenmakers, J.C.M.D.

    2008-01-01

    The load-bearing capacity of a timber member loaded perpendicular-to-grain by a connection is governed by either the embedment strength, the bending yield strength of the steel fasteners, or the splitting strength of the timber. Only coarse models for predicting the splitting strength are

  2. Dynamic programming for optimization of timber production and grazing in ponderosa pine

    Science.gov (United States)

    Kurt H. Riitters; J. Douglas Brodie; David W. Hann

    1982-01-01

    Dynamic programming procedures are presented for optimizing thinning and rotation of even-aged ponderosa pine by using the four descriptors: age, basal area, number of trees, and time since thinning. Because both timber yield and grazing yield are functions of stand density, the two outputs-forage and timber-can both be optimized. The soil expectation values for single...

  3. 36 CFR 223.7 - Permission for free use of timber outside free-use areas.

    Science.gov (United States)

    2010-07-01

    ..., DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER General Provisions § 223.7 Permission for free use of timber outside free-use areas. Similar material may be cut outside of a free-use area without permit in cases of emergency, but the person taking such material shall promptly notify...

  4. 36 CFR 223.193 - Procedures for reporting acquisition and disposition of unprocessed Federal timber.

    Science.gov (United States)

    2010-07-01

    ... for the calendar year listing, by company, from whom the timber was acquired; the date of acquisition... certificate stating that: (i) The certifier has read and understands the form; (ii) The certifier is eligible... applicable laws. (b) Transfer of unprocessed National Forest System timber. Each person who transfers to...

  5. Effects of timber harvest on aquatic vertebrates and habitat in the North Fork Caspar Creek

    Science.gov (United States)

    Rodney J. Nakamoto

    1998-01-01

    I examined the relationships between timber harvest, creek habitat, and vertebrate populations in the North and South forks of Caspar Creek. Habitat inventories suggested pool availability increased after the onset of timber harvest activities. Increased large woody debris in the channel was associated with an increase in the frequency of blowdown in the riparian...

  6. Timber resource statistics for non-Federal forest land in west-central Oregon.

    Science.gov (United States)

    Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

    1987-01-01

    This report summarizes a 1985-86 timber resource inventory of the non-Federal forest land in the four counties (Benton, Lane, Lincoln, and Linn) in west-central Oregon. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  7. Timber resource statistics for all forest land, except national forests, in eastern Oregon.

    Science.gov (United States)

    Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

    1989-01-01

    This report summarizes a 1987 timber resource inventory of all forest land, except National Forests, in the 17 counties (Baker, Crook, Deschutes, Gilliam, Grant, Harney, Jefferson, Klamath, Lake, Malheur, Morrow, Sherman, Umatilla, Union, Wallowa, Wasco, and Wheeler Counties) in eastern Oregon. Detailed tables of forest area, timber volume, growth, mortality, and...

  8. Timber resource statistics for non-federal forest land in northwest Oregon.

    Science.gov (United States)

    Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

    1986-01-01

    This report summarizes a 1986 timber resource inventory of the non-Federal forest land in the 10 counties (Clackamas, Clatsop, Columbia, Hood River, Marion, Multnomah , Polk, Tillamook, Washington, and Yamhill) in northwest Oregon. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  9. Estimating bridge stiffness using a forced-vibration technique for timber bridge health monitoring

    Science.gov (United States)

    James P. Wacker; Xiping Wang; Brian Brashaw; Robert J. Ross

    2006-01-01

    This paper describes an effort to refine a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the frequency response of several simple-span, sawn timber beam (with plank deck) bridges located in St. Louis County, Minnesota. Static load deflections were also measured to...

  10. Timber harvesting patterns for major states in the central, northern, and mid-Atlantic hardwood regions

    Science.gov (United States)

    William G. Luppold; Matthew S. Bumgardner

    2018-01-01

    Timber harvesting is a major disturbance agent influencing the composition and structure of eastern hardwood forests. To better understand timber harvesting practices, we examined roundwood harvesting patterns in 13 eastern states in the Central, Mid-Atlantic, and Northern regions that contained high proportional volumes of hardwood in their forest inventories. Nearly...

  11. Nondestructive assessment of timber bridges using a vibration-based method

    Science.gov (United States)

    Xiping Wang; James P. Wacker; Robert J. Ross; Brian K. Brashaw

    2005-01-01

    This paper describes an effort to develop a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the natural frequency of single-span timber bridges in the laboratory and field. An analytical model based on simple beam theory was proposed to represent the relationship...

  12. Clustering Timber Harvests and the Effects of Dynamic Forest Management Policy on Forest Fragmentation

    Science.gov (United States)

    Eric J. Gustafson

    1998-01-01

    To integrate multiple uses (mature forest and commodity production) better on forested lands, timber management strategies that cluster harvests have been proposed. One such approach clusters harvest activity in space and time, and rotates timber production zones across the landscape with a long temporal period (dynamic zoning). Dynamic zoning has...

  13. 36 CFR 223.6 - Cutting and removal of timber in free-use areas.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Cutting and removal of timber... OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER General Provisions § 223.6 Cutting... or designated by forest officers may be cut and removed for personal use for domestic purposes...

  14. Agroforestry systems of timber species and cacao: survival and growth during the early stages

    Directory of Open Access Journals (Sweden)

    Wilmer Espinoza

    2013-08-01

    Full Text Available In recent times, increased emphasis has been placed on diversifying the types of trees to shade cacao (Theobromacacao L. and to achieve additional services. Agroforestry systems that include profitable and native timber trees are a viable alternative but it is necessary to understand the growth characteristics of these species under different environmental conditions. Thus, timber tree species selection should be based on plant responses to biotic and abiotic factors. The aims of this study were (1 to evaluate growth rates and leaf area indices of the four commercial timber species: Cordia thaisiana, Cedrela odorata, Swietenia macrophylla and Tabebuia rosea in conjunction with incidence of insect attacks and (2 to compare growth rates of four Venezuelan Criollo cacao cultivars planted under the shade of these four timber species during the first 36 months after establishment. Parameters monitored in timber trees were: survival rates, growth rates expressed as height and diameter at breast height and leaf area index. In the four Cacao cultivars: height and basal diameter. C. thaisiana and C. odorata had the fastest growth and the highest survival rates. Growth rates of timber trees will depend on their susceptibility to insect attacks as well as to total leaf area. All cacao cultivars showed higher growth rates under the shade of C. odorata. Growth rates of timber trees and cacao cultivars suggest that combinations of cacao and timber trees are a feasible agroforestry strategy in Venezuela.

  15. Overview of development and design of MPACT: Michigan parallel characteristics transport code

    Energy Technology Data Exchange (ETDEWEB)

    Kochunas, B.; Collins, B.; Jabaay, D.; Downar, T. J.; Martin, W. R. [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, 2200 Bonisteel, Ann Arbor, MI 48109 (United States)

    2013-07-01

    MPACT (Michigan Parallel Characteristics Transport Code) is a new reactor analysis tool. It is being developed by students and research staff at the University of Michigan to be used for an advanced pin-resolved transport capability within VERA (Virtual Environment for Reactor Analysis). VERA is the end-user reactor simulation tool being produced by the Consortium for the Advanced Simulation of Light Water Reactors (CASL). The MPACT development project is itself unique for the way it is changing how students do research to achieve the instructional and research goals of an academic institution, while providing immediate value to industry. The MPACT code makes use of modern lean/agile software processes and extensive testing to maintain a level of productivity and quality required by CASL. MPACT's design relies heavily on object-oriented programming concepts and design patterns and is programmed in Fortran 2003. These designs are explained and illustrated as to how they can be readily extended to incorporate new capabilities and research ideas in support of academic research objectives. The transport methods currently implemented in MPACT include the 2-D and 3-D method of characteristics (MOC) and 2-D and 3-D method of collision direction probabilities (CDP). For the cross section resonance treatment, presently the subgroup method and the new embedded self-shielding method (ESSM) are implemented within MPACT. (authors)

  16. Long-term behaviour of timber structures in torrent control

    Science.gov (United States)

    Rickli, Christian; Graf, Frank

    2014-05-01

    Timber is widely used for protection measures in torrent control. However, life span of woody constructions such as timber check dams is limited due to fungal decay. However, only sparse scientific information is available on the long-term behaviour of timber structures and the colonisation with decay fungi. Related to this, in practice a controversial discussion has been going on if either Norway Spruce (Picea abies) or Silver Fir (Abies alba) is more enduring and if bark removal increases resistance against fungal decay. In order to going into this matter a series of 15 timber check dams built in 1996 has been monitored. The constructions were alternatively realised with Norway Spruce and Silver Fir, half of them each with remaining and removed bark, respectively. The scientific investigations included the documentation of colonisation with rot fungi and the identification of decayed zones with a simple practical approach as well as based on drilling resistance. Colonisation by decay fungi started three years after construction (e.g. Gloeophyllum sepiarium), detecting two years later first parts with reduced wood resistance. Sixteen years after construction decay was found on all check dams but two. Wood quality was markedly better in watered sections compared to the occasionally dry lateral abutment sections. Taking the whole check dams into consideration, slightly more decay was detected in Norway Spruce compared to logs in Silver Fir and both the practical approach and the drilling resistance measurement yielded in more defects on logs without bark. However, due to limited number of replications and fungal data, it was not possible to statistically verify these results. Statistical analysis was restricted to the drilling resistance data and fruit-bodies of decay fungi of the uppermost log of each check dam. Based on this limited analysis significant differences in the effect on the drilling resistance were found for watered sections and lateral abutments

  17. FIRE PROTECTION OF TIMBER STRUCTURES STRENGTHENED WITH FRP MATERIALS

    Directory of Open Access Journals (Sweden)

    Radek Zigler

    2015-12-01

    Full Text Available Modern, progressive methods of structures’ strengthening based on the use of composite materials composed of high strength fibers (carbon, glass, aramid or basalt and matrices based on epoxy resins brings, among many indisputable advantages (low weight, high effectiveness, easy application etc. also some disadvantages. One of the major disadvantages is a low fire resistance of these materials due to the low glass transition temperature Tg of the resin used. Based on an extensive research of strengthening of historic structures with FRP materials [1], the article outlines possible approaches to this problem, especially while strengthening timber load- bearing structures of historic buildings.

  18. On the Architectural Qualities of Cross Laminated Timber

    DEFF Research Database (Denmark)

    Bejder, Anne Kirkegaard; Kirkegaard, Poul Henning; Fisker, Anna Marie

    2010-01-01

    In resent years wood as a building material has gain renewed focus and with that new production methods and wooden products have been developed. One of these products is Cross Laminated Timber (CLT) which, by means of high-technology production and a distinctive construction with layers of lamellae...... glued together crosswise, possesses structural capacities which are out of woods nature. Several research studies have clarified that CLT has many qualities within the engineering field but knowledge regarding its applications and aesthetics is more insufficient. Thus, the purpose of this paper...

  19. Effect of Load Duration on Timber Structures in Denmark

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Stang, Birgitte Friis Dela; Svensson, Staffan

    2003-01-01

    . The parameters in these models are fitted by the Maximum Likelihood Method using data relevant for Danish structural timber and the statistical uncertainty is quantified. The reliability is evaluated using representative shortand long-term limit states, and the load duration factor kmod is estimated using......Load duration effects are estimated on basis of simulation of realizations of wind, snow and imposed loads in accordance with the load models in the Danish structural codes. Three damage accumulation models are considered, namely Gerhards model, Barret & Foschi's model and Foschi & Yao's model...

  20. Solar water heating and its prospect for timber drying application

    Energy Technology Data Exchange (ETDEWEB)

    Yin, B T

    1982-01-01

    The technical requirements for timber drying are discussed, and the possibility of using a solar water heating system to substitute for conventional fuel in a modern kiln is looked into from heat transfer considerations. At the moment, conventional fuel is used to generate steam for the heating of air in a kiln. If hot water is to be substitued for steam as the heating medium, the heating coil size required is larger. This size is determined relative to that of a steam coil for similar kiln operating temperatures. 5 references.