Defect structure of ultrafine MgB2 nanoparticles

International Nuclear Information System (INIS)

Bateni, Ali; Somer, Mehmet; Repp, Sergej; Erdem, Emre; Thomann, Ralf; Acar, Selçuk

2014-01-01

Defect structure of MgB 2 bulk and ultrafine particles, synthesized by solid state reaction route, have been investigated mainly by the aid of X-band electron paramagnetic resonance spectrometer. Two different amorphous Boron (B) precursors were used for the synthesis of MgB 2 , namely, boron 95 (purity 95%–97%, <1.5 μm) and nanoboron (purity >98.5%, <250 nm), which revealed bulk and nanosized MgB 2 , respectively. Scanning and transmission electron microscopy analysis demonstrate uniform and ultrafine morphology for nanosized MgB 2 in comparison with bulk MgB 2 . Powder X-ray diffraction data show that the concentration of the by-product MgO is significantly reduced when nanoboron is employed as precursor. It is observed that a significant average particle size reduction for MgB 2 can be achieved only by using B particles of micron or nano size. The origin and the role of defect centers were also investigated and the results proved that at nanoscale MgB 2 material contains Mg vacancies. Such vacancies influence the connectivity and the conductivity properties which are crucial for the superconductivity applications

Maraba MG1 Virus Enhances Natural Killer Cell Function via Conventional Dendritic Cells to Reduce Postoperative Metastatic Disease

Science.gov (United States)

Zhang, Jiqing; Tai, Lee-Hwa; Ilkow, Carolina S; Alkayyal, Almohanad A; Ananth, Abhirami A; de Souza, Christiano Tanese; Wang, Jiahu; Sahi, Shalini; Ly, Lundi; Lefebvre, Charles; Falls, Theresa J; Stephenson, Kyle B; Mahmoud, Ahmad B; Makrigiannis, Andrew P; Lichty, Brian D; Bell, John C; Stojdl, David F; Auer, Rebecca C

2014-01-01

This study characterizes the ability of novel oncolytic rhabdoviruses (Maraba MG1) to boost natural killer (NK) cell activity. Our results demonstrate that MG1 activates NK cells via direct infection and maturation of conventional dendritic cells. Using NK depletion and conventional dendritic cells ablation studies in vivo, we established that both are required for MG1 efficacy. We further explored the efficacy of attenuated MG1 (nonreplicating MG1-UV2min and single-cycle replicating MG1-Gless) and demonstrated that these viruses activate conventional dendritic cells, although to a lesser extent than live MG1. This translates to equivalent abilities to remove tumor metastases only at the highest viral doses of attenuated MG1. In tandem, we characterized the antitumor ability of NK cells following preoperative administration of live and attenuated MG1. Our results demonstrates that a similar level of NK activation and reduction in postoperative tumor metastases was achieved with equivalent high viral doses concluding that viral replication is important, but not necessary for NK activation. Biochemical characterization of a panel of UV-inactivated MG1 (2–120 minutes) revealed that intact viral particle and target cell recognition are essential for NK cell–mediated antitumor responses. These findings provide mechanistic insight and preclinical rationale for safe perioperative virotherapy to effectively reduce metastatic disease following cancer surgery. PMID:24695102

Loss of Endothelial Barrier in Marfan Mice (mgR/mgR Results in Severe Inflammation after Adenoviral Gene Therapy.

Directory of Open Access Journals (Sweden)

Philipp Christian Seppelt

Full Text Available Marfan syndrome is an autosomal dominant inherited disorder of connective tissue. The vascular complications of Marfan syndrome have the biggest impact on life expectancy. The aorta of Marfan patients reveals degradation of elastin layers caused by increased proteolytic activity of matrix metalloproteinases (MMPs. In this study we performed adenoviral gene transfer of human tissue inhibitor of matrix metalloproteinases-1 (hTIMP-1 in aortic grafts of fibrillin-1 deficient Marfan mice (mgR/mgR in order to reduce elastolysis.We performed heterotopic infrarenal transplantation of the thoracic aorta in female mice (n = 7 per group. Before implantation, mgR/mgR and wild-type aortas (WT, C57BL/6 were transduced ex vivo with an adenoviral vector coding for human TIMP-1 (Ad.hTIMP-1 or β-galactosidase (Ad.β-Gal. As control mgR/mgR and wild-type aortas received no gene therapy. Thirty days after surgery, overexpression of the transgene was assessed by immunohistochemistry (IHC and collagen in situ zymography. Histologic staining was performed to investigate inflammation, the neointimal index (NI, and elastin breaks. Endothelial barrier function of native not virus-exposed aortas was evaluated by perfusion of fluorescent albumin and examinations of virus-exposed tissue were performed by transmission electron microscopy (TEM.IHC and ISZ revealed sufficient expression of the transgene. Severe cellular inflammation and intima hyperplasia were seen only in adenovirus treated mgR/mgR aortas (Ad.β-Gal, Ad.hTIMP-1 NI: 0.23; 0.43, but not in native and Ad.hTIMP-1 treated WT (NI: 0.01; 0.00. Compared to native mgR/mgR and Ad.hTIMP-1 treated WT aorta, the NI is highly significant greater in Ad.hTIMP-1 transduced mgR/mgR aorta (p = 0.001; p = 0.001. As expected, untreated Marfan grafts showed significant more elastolysis compared to WT (p = 0.001. However, elastolysis in Marfan aortas was not reduced by adenoviral overexpression of hTIMP-1 (compared to untreated

Impact of interface manipulation of oxide on electrical transport properties and low-frequency noise in MgO/NiFe/MgO heterojunctions

International Nuclear Information System (INIS)

Li, Jian-wei; Zhao, Chong-jun; Feng, Chun; Yu, Guang-hua; Zhou, Zhongfu

2015-01-01

Low-frequency noise and magnetoresistance in sputtered-deposited Ta(5 nm)/MgO (3 nm)/NiFe(10 nm)/MgO(3 nm)/Ta(3 nm) films have been measured as a function of different annealing times at 400°C. These measurements did not change synchronously with annealing time. A significant increase in magnetoresistance is observed for short annealing times (of the order of minutes) and is correlated with a relatively small reduction in 1/f noise. In contrast, a significant reduction in 1/f noise is observed for long annealing times (of the order of hours) accompanied by a small change in magnetoresistance. After annealing for 2 hours, the 1/f noise decreases by three orders of magnitude. Transmission electron microscopy and slow positron annihilation results implicate the cause being micro-structural changes in the MgO layers and interfaces following different annealing times. The internal vacancies in the MgO layers gather into vacancy clusters to reduce the defect density after short annealing times, whereas the MgO/NiFe and the NiFe/MgO interfaces improve significantly after long annealing times with the amorphous MgO layers gradually crystallizing following the release of interfacial stress

Impact of interface manipulation of oxide on electrical transport properties and low-frequency noise in MgO/NiFe/MgO heterojunctions

Science.gov (United States)

Li, Jian-wei; Zhao, Chong-jun; Feng, Chun; Zhou, Zhongfu; Yu, Guang-hua

2015-08-01

Low-frequency noise and magnetoresistance in sputtered-deposited Ta(5 nm)/MgO (3 nm)/NiFe(10 nm)/MgO(3 nm)/Ta(3 nm) films have been measured as a function of different annealing times at 400°C. These measurements did not change synchronously with annealing time. A significant increase in magnetoresistance is observed for short annealing times (of the order of minutes) and is correlated with a relatively small reduction in 1/f noise. In contrast, a significant reduction in 1/f noise is observed for long annealing times (of the order of hours) accompanied by a small change in magnetoresistance. After annealing for 2 hours, the 1/f noise decreases by three orders of magnitude. Transmission electron microscopy and slow positron annihilation results implicate the cause being micro-structural changes in the MgO layers and interfaces following different annealing times. The internal vacancies in the MgO layers gather into vacancy clusters to reduce the defect density after short annealing times, whereas the MgO/NiFe and the NiFe/MgO interfaces improve significantly after long annealing times with the amorphous MgO layers gradually crystallizing following the release of interfacial stress.

Impact of interface manipulation of oxide on electrical transport properties and low-frequency noise in MgO/NiFe/MgO heterojunctions

Energy Technology Data Exchange (ETDEWEB)

Li, Jian-wei [School of Materials Science and Engineering, Shanghai University, Shanghai 200072 (China); School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Zhao, Chong-jun; Feng, Chun; Yu, Guang-hua [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Zhou, Zhongfu [School of Materials Science and Engineering, Shanghai University, Shanghai 200072 (China)

2015-08-15

Low-frequency noise and magnetoresistance in sputtered-deposited Ta(5 nm)/MgO (3 nm)/NiFe(10 nm)/MgO(3 nm)/Ta(3 nm) films have been measured as a function of different annealing times at 400°C. These measurements did not change synchronously with annealing time. A significant increase in magnetoresistance is observed for short annealing times (of the order of minutes) and is correlated with a relatively small reduction in 1/f noise. In contrast, a significant reduction in 1/f noise is observed for long annealing times (of the order of hours) accompanied by a small change in magnetoresistance. After annealing for 2 hours, the 1/f noise decreases by three orders of magnitude. Transmission electron microscopy and slow positron annihilation results implicate the cause being micro-structural changes in the MgO layers and interfaces following different annealing times. The internal vacancies in the MgO layers gather into vacancy clusters to reduce the defect density after short annealing times, whereas the MgO/NiFe and the NiFe/MgO interfaces improve significantly after long annealing times with the amorphous MgO layers gradually crystallizing following the release of interfacial stress.

A simple route to improve rate performance of LiFePO4/reduced graphene oxide composite cathode by adding Mg2+ via mechanical mixing

Science.gov (United States)

Huang, Yuan; Liu, Hao; Gong, Li; Hou, Yanglong; Li, Quan

2017-04-01

Introducing Mg2+ to LiFePO4 and reduced graphene oxide composite via mechanical mixing and annealing leads to largely improved rate performance of the cathode (e.g. ∼78 mA h g-1 at 20 C for LiFePO4 and reduced graphene oxide composite with Mg2+ introduction vs. ∼37 mA h g-1 at 20 C for LiFePO4 and reduced graphene oxide composite). X-ray photoelectron spectroscopy unravels that the enhanced reduction of Fe2+ to Fe0 occurs in the simultaneous presence of Mg2+ and reduced graphene oxide, which is beneficial for the rate capability of cathode. The simple fabrication process provides a simple and effective means to improve the rate performance of the LiFePO4 and reduced graphene oxide composite cathode.

Positron bound states on hydride ions in thermochemically reduced MgO single crystals

International Nuclear Information System (INIS)

Monge, M.A.; Pareja, R.; Gonzalez, R.; Chen, Y.

1996-01-01

Positron-lifetime and Doppler-broadening techniques were used to unambiguously identify positronium hydrides in thermochemically reduced MgO crystals at low temperatures. Positrons trapped at H - ions, forming PsH, yield a lifetime of (640±40) ps, independent of temperature. Complementary evidence for this identification was provided by Doppler-broadening experiments, in which positrons were trapped at H 2- sites at low temperatures. The H 2- ions were formed via H - +e - →H 2- by the capturing of an electron released from Fe + impurity under blue-light stimulation. copyright 1996 The American Physical Society

Role of oral tramadol 50 mg in reducing pain associated with outpatient hysteroscopy: A randomised double-blind placebo-controlled trial.

Science.gov (United States)

Hassan, AbdelGany; Haggag, Hisham

2016-02-01

Several drugs have been used to reduce hysteroscopy-associated pain. Although the Royal College of Obstetricians and Gynaecologists has recommended against the use of opiates in outpatient hysteroscopy, we wished to investigate if opioids can be used if the appropriate opioid was given in the appropriate dose. To study the effectiveness of tramadol 50 mg in reducing pain associated with outpatient hysteroscopy. A prospective randomised double-blind placebo-controlled trial conducted in the outpatient hysteroscopy clinic at Cairo University Hospital. Main outcome measures were the severity of pain during the procedure, immediately after the procedure and 30 minutes later assessed by a visual analogue scale (VAS). VAS of 0 indicates no pain and VAS of 10 indicates the worst possible pain. A total of 140 women who had diagnostic outpatient hysteroscopy were randomised to receive oral tramadol 50 mg or placebo one h before performing outpatient hysteroscopy. There was no difference between the groups in the age, parity, duration of the procedures or indications of hysteroscopy. The median pain score was significantly lower in the tramadol group during the procedure (5 vs 6; P = 0.013), immediately after the procedure (3 vs 4; P pain evoked by the procedure and the drug was well tolerated by women. © 2016 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

Significantly enhanced critical current density in nano-MgB2 grains rapidly formed at low temperature with homogeneous carbon doping

Science.gov (United States)

Liu, Yongchang; Lan, Feng; Ma, Zongqing; Chen, Ning; Li, Huijun; Barua, Shaon; Patel, Dipak; Shahriar, M.; Hossain, Al; Acar, S.; Kim, Jung Ho; Xue Dou, Shi

2015-05-01

High performance MgB2 bulks using carbon-coated amorphous boron as a boron precursor were fabricated by Cu-activated sintering at low temperature (600 °C, below the Mg melting point). Dense nano-MgB2 grains with a high level of homogeneous carbon doping were formed in these MgB2 samples. This type of microstructure can provide a stronger flux pinning force, together with depressed volatility and oxidation of Mg owing to the low-temperature Cu-activated sintering, leading to a significant improvement of critical current density (Jc) in the as-prepared samples. In particular, the value of Jc for the carbon-coated (Mg1.1B2)Cu0.05 sample prepared here is even above 1 × 105 A cm-2 at 20 K, 2 T. The results herein suggest that the combination of low-temperature Cu-activated sintering and employment of carbon-coated amorphous boron as a precursor could be a promising technique for the industrial production of practical MgB2 bulks or wires with excellent Jc, as the carbon-coated amorphous boron powder can be produced commercially at low cost, while the addition of Cu is very convenient and inexpensive.

Designing MgFe{sub 2}O{sub 4} decorated on green mediated reduced graphene oxide sheets showing photocatalytic performance and luminescence property

Energy Technology Data Exchange (ETDEWEB)

Shetty, Krushitha [Department of Nanotechnology, PG Center, Bangalore Region, VIAT, VTU, Muddenahalli, Chikkaballapur 562101 (India); Dr. D. Premachandrasagar Centre for Advanced Materials, DSCE, Bangalore 560078 (India); Lokesh, S.V. [Department of Nanotechnology, PG Center, Bangalore Region, VIAT, VTU, Muddenahalli, Chikkaballapur 562101 (India); Rangappa, Dinesh, E-mail: dineshrangappa@gmail.com [Department of Nanotechnology, PG Center, Bangalore Region, VIAT, VTU, Muddenahalli, Chikkaballapur 562101 (India); Nagaswarupa, H.P., E-mail: nagaswarupa77@gmail.com [Research Center, Department of Science, East West Institute of Technology, Bangalore 560091 (India); Nagabhushana, H., E-mail: bhushanvlc@gmail.com [Prof. CNR Rao Centre for Advanced Materials, Tumkur University, Tumkur 572103 (India); Anantharaju, K.S., E-mail: iamananthkurupalya@gmail.com [Department of Chemistry, Dayananda Sagar College of Engineering, Shavige Malleshwara Hills, Kumaraswamy Layout, Bangalore 560078 (India); Dr. D. Premachandrasagar Centre for Advanced Materials, DSCE, Bangalore 560078 (India); Prashantha, S.C. [Research Center, Department of Science, East West Institute of Technology, Bangalore 560091 (India); Vidya, Y.S. [Department of Physics, Lal Bahadur Shastri Government First Grade College, Bangalore, 560032 (India); Sharma, S.C. [Dr. D. Premachandrasagar Centre for Advanced Materials, DSCE, Bangalore 560078 (India); Department of Mechanical Engineering, DSCE, Bangalore-560078 (India)

2017-02-15

Here, a green route has been reported to convert Graphene Oxide (GO) to reduced graphene oxide (RGO) using clove extract. A modest and eco-accommodating sol-gel strategy has been employed to prepare MgFe{sub 2}O{sub 4} nanoparticles, MgFe{sub 2}O{sub 4}–RGO nanocomposite samples. The samples were analyzed by Powder X-ray diffraction (PXRD), Fourier Transform Infrared Spectroscopy (FTIR), UV–Visible Spectroscopy, Scanning Electron Microcopy (SEM), Transmission Electron Microscopy (TEM), Photoluminescence (PL) and Electrochemical Impedance Spectroscopy (EIS). PXRD result revealed that the prepared samples were cubic spinel in nature. SEM results uncovered flake like surface morphology of the prepared nanomaterial. Better PL emission signature was observed when excited at 329 nm. PL studies demonstrated that the present samples were potential for the fabrication of white component of white light emitting diodes (WLEDs). Further, MgFe{sub 2}O{sub 4}–RGO nanocomposite showed enhanced photocatalytic movement (PCM) and photostability under Sunlight in the decomposition of Malachite Green (MG) compared to MgFe{sub 2}O{sub 4}. This can be attributed to the interaction of MgFe{sub 2}O{sub 4} surface with RGO sheets which results in PL quenching, demonstrates that the recombination of photo-induced electrons and holes in MgFe{sub 2}O{sub 4}–RGO nanocomposite is more effectively inhibited. A possible mechanism for the enhanced properties of MgFe{sub 2}O{sub 4}–RGO nanocomposite was discussed. Moreover, MgFe{sub 2}O{sub 4}–RGO photocatalyst also showed easy magnetic separation with high reusability. These results unveil that the synthesized sample can be used in display applications and also as a potential photocatalyst. - Graphical abstract: Green mediated reduced graphene oxide with MgFe{sub 2}O{sub 4} for display applications and also as a potential photocatalyst. - Highlights: • Synthesized GO was reduced to RGO by green route using clove extract. • Mg

Modification of GaN(0001) growth kinetics by Mg doping

International Nuclear Information System (INIS)

Monroy, E.; Andreev, T.; Holliger, P.; Bellet-Amalric, E.; Shibata, T.; Tanaka, M.; Daudin, B.

2004-01-01

We have studied the effect of Mg doping on the surface kinetics of GaN during growth by plasma-assisted molecular-beam epitaxy. Mg tends to segregate on the surface of GaN, inhibiting the formation of the self-regulated Ga film which is used as a surfactant for the growth of undoped and Si-doped GaN. The growth window is hence significantly reduced. Higher growth temperatures lead to an enhancement of Mg segregation and an improvement of the surface morphology

Significantly enhanced critical current density in nano-MgB2 grains rapidly formed at low temperature with homogeneous carbon doping

International Nuclear Information System (INIS)

Liu, Yongchang; Lan, Feng; Ma, Zongqing; Chen, Ning; Li, Huijun; Barua, Shaon; Patel, Dipak; Shahriar, M; Hossain, Al; Kim, Jung Ho; Dou, Shi Xue; Acar, S

2015-01-01

High performance MgB 2 bulks using carbon-coated amorphous boron as a boron precursor were fabricated by Cu-activated sintering at low temperature (600 °C, below the Mg melting point). Dense nano-MgB 2 grains with a high level of homogeneous carbon doping were formed in these MgB 2 samples. This type of microstructure can provide a stronger flux pinning force, together with depressed volatility and oxidation of Mg owing to the low-temperature Cu-activated sintering, leading to a significant improvement of critical current density (J c ) in the as-prepared samples. In particular, the value of J c for the carbon-coated (Mg 1.1 B 2 )Cu 0.05 sample prepared here is even above 1 × 10 5 A cm −2 at 20 K, 2 T. The results herein suggest that the combination of low-temperature Cu-activated sintering and employment of carbon-coated amorphous boron as a precursor could be a promising technique for the industrial production of practical MgB 2 bulks or wires with excellent J c , as the carbon-coated amorphous boron powder can be produced commercially at low cost, while the addition of Cu is very convenient and inexpensive. (paper)

Reliability enhancement due to in-situ post-oxidation of sputtered MgO barrier in double MgO barrier magnetic tunnel junction

Directory of Open Access Journals (Sweden)

Chikako Yoshida

2017-06-01

Full Text Available We have investigated the effects of in-situ post-oxidation (PO of a sputtered MgO barrier in a double-MgO-barrier magnetic tunnel junction (MTJ and found that the short error rate was significantly reduced, the magnetoresistance (MR ratio was increased approximately 18%, and the endurance lifetime was extend. In addition, we found that the distribution of breakdown number (a measure of endurance exhibits trimodal characteristics, which indicates competition between extrinsic and intrinsic failures. This improvement in reliability might be related to the suppression of Fe and Co diffusion to the MgO barrier, as revealed by electron energy-loss spectroscopy (EELS analysis.

Prenatal prochloraz treatment significantly increases pregnancy length and reduces offspring weight but does not affect social-olfactory memory in rats

DEFF Research Database (Denmark)

Dmytriyeva, Oksana; Klementiev, Boris; Berezin, Vladimir

2013-01-01

Metabolites of the commonly used imidazole fungicide prochloraz are androgen receptor antagonists. They have been shown to block androgen-driven development and compromise reproductive function. We tested the effect of prochloraz on cognitive behavior following exposure to this fungicide during...... the perinatal period. Pregnant Wistar rats were administered a 200mg/kg dose of prochloraz on gestational day (GD) 7, GD11, and GD15. The social recognition test (SRT) was performed on 7-week-old male rat offspring. We found an increase in pregnancy length and a significantly reduced pup weight on PND15 and PND...

Intra-individual comparison of different contrast media concentrations (300 mg, 370 mg and 400 mg iodine) in MDCT

Energy Technology Data Exchange (ETDEWEB)

Behrendt, Florian F.; Keil, Sebastian; Plumhans, Cedric; Guenther, Rolf W. [RWTH Aachen University, Department of Diagnostic Radiology, University Hospital, Aachen (Germany); Pietsch, Hubertus; Jost, Gregor; Sieber, Martin A.; Seidensticker, Peter [Bayer Schering Pharma AG, Berlin (Germany); Mahnken, Andreas H. [RWTH Aachen University, Department of Diagnostic Radiology, University Hospital, Aachen (Germany); RWTH Aachen University, Applied Medical Engineering, Helmholtz-Institute for Biomedical Engineering, Aachen (Germany)

2010-07-15

To compare intra-individual contrast enhancement in multi-detector-row computed tomography (MDCT) using contrast media (CM) containing 300, 370 and 400 mg iodine per ml (mgI/ml). Six pigs underwent repeated chest MDCT using three different CM (iopromide 300, iopromide 370, iomeprol 400). An identical iodine delivery (IDR) rate of 1.5 gI/s and a constant total iodine dose of 300 mg/kg body weight were used. Dynamic CT were acquired at the level of the pulmonary artery, and the ascending and descending aorta. After the time enhancement curves were computed, the pulmonary and aortic peak enhancement, time to peak and plateau time above 300 HU were calculated. Intra-individual peak contrast enhancement was significantly higher for the 300 mgI/ml contrast medium compared with the 370 and 400 mgI/ml media: pulmonary trunk 595 HU vs 516 HU (p = 0.0093) vs 472HU (p = 0.0005), and aorta 505 HU vs 454 HU (p = 0.0008) vs 439 HU (p = 0.0001), respectively. Comparison of time to peaks showed no significant difference. Plateau times were significantly longer for the 300 mgI/ml than for the 370 and 400 mgI/ml CM at all anatomical sites. Given normalised IDR and total iodine burden, the use of CM with a standard concentration with 300 mg iodine/ml provides improved contrast enhancement compared with highly concentrated CM in the chest. (orig.)

Reduced bone mineral density is not associated with significantly reduced bone quality in men and women practicing long-term calorie restriction with adequate nutrition.

Science.gov (United States)

Villareal, Dennis T; Kotyk, John J; Armamento-Villareal, Reina C; Kenguva, Venkata; Seaman, Pamela; Shahar, Allon; Wald, Michael J; Kleerekoper, Michael; Fontana, Luigi

2011-02-01

Calorie restriction (CR) reduces bone quantity but not bone quality in rodents. Nothing is known regarding the long-term effects of CR with adequate intake of vitamin and minerals on bone quantity and quality in middle-aged lean individuals. In this study, we evaluated body composition, bone mineral density (BMD), and serum markers of bone turnover and inflammation in 32 volunteers who had been eating a CR diet (approximately 35% less calories than controls) for an average of 6.8 ± 5.2 years (mean age 52.7 ± 10.3 years) and 32 age- and sex-matched sedentary controls eating Western diets (WD). In a subgroup of 10 CR and 10 WD volunteers, we also measured trabecular bone (TB) microarchitecture of the distal radius using high-resolution magnetic resonance imaging. We found that the CR volunteers had significantly lower body mass index than the WD volunteers (18.9 ± 1.2 vs. 26.5 ± 2.2 kg m(-2) ; P = 0.0001). BMD of the lumbar spine (0.870 ± 0.11 vs. 1.138 ± 0.12 g cm(-2) , P = 0.0001) and hip (0.806 ± 0.12 vs. 1.047 ± 0.12 g cm(-2) , P = 0.0001) was also lower in the CR than in the WD group. Serum C-terminal telopeptide and bone-specific alkaline phosphatase concentration were similar between groups, while serum C-reactive protein (0.19 ± 0.26 vs. 1.46 ± 1.56 mg L(-1) , P = 0.0001) was lower in the CR group. Trabecular bone microarchitecture parameters such as the erosion index (0.916 ± 0.087 vs. 0.877 ± 0.088; P = 0.739) and surface-to-curve ratio (10.3 ± 1.4 vs. 12.1 ± 2.1, P = 0.440) were not significantly different between groups. These findings suggest that markedly reduced BMD is not associated with significantly reduced bone quality in middle-aged men and women practicing long-term calorie restriction with adequate nutrition.

Characteristics of Mg-doped and In-Mg co-doped p-type GaN epitaxial layers grown by metal organic chemical vapour deposition

International Nuclear Information System (INIS)

Chung, S J; Lee, Y S; Suh, E-K; Senthil Kumar, M; An, M H

2010-01-01

Mg-doped and In-Mg co-doped p-type GaN epilayers were grown using the metal organic chemical vapour deposition technique. The effect of In co-doping on the physical properties of p-GaN layer was examined by high resolution x-ray diffraction (HRXRD), transmission electron microscopy (TEM), Hall effect, photoluminescence (PL) and persistent photoconductivity (PPC) at room temperature. An improved crystalline quality and a reduction in threading dislocation density are evidenced upon In doping in p-GaN from HRXRD and TEM images. Hole conductivity, mobility and carrier density also significantly improved by In co-doping. PL studies of the In-Mg co-doped sample revealed that the peak position is blue shifted to 3.2 eV from 2.95 eV of conventional p-GaN and the PL intensity is increased by about 25%. In addition, In co-doping significantly reduced the PPC effect in p-type GaN layers. The improved electrical and optical properties are believed to be associated with the active participation of isolated Mg impurities.

Quasicrystal-reinforced Mg alloys.

Science.gov (United States)

Kyun Kim, Young; Tae Kim, Won; Hyang Kim, Do

2014-04-01

The formation of the icosahedral phase (I-phase) as a secondary solidification phase in Mg-Zn-Y and Mg-Zn-Al base systems provides useful advantages in designing high performance wrought magnesium alloys. The strengthening in two-phase composites (I-phase + α -Mg) can be explained by dispersion hardening due to the presence of I-phase particles and by the strong bonding property at the I-phase/matrix interface. The presence of an additional secondary solidification phase can further enhance formability and mechanical properties. In Mg-Zn-Y alloys, the co-presence of I and Ca 2 Mg 6 Zn 3 phases by addition of Ca can significantly enhance formability, while in Mg-Zn-Al alloys, the co-presence of the I-phase and Mg 2 Sn phase leads to the enhancement of mechanical properties. Dynamic and static recrystallization are significantly accelerated by addition of Ca in Mg-Zn-Y alloy, resulting in much smaller grain size and more random texture. The high strength of Mg-Zn-Al-Sn alloys is attributed to the presence of finely distributed Mg 2 Sn and I-phase particles embedded in the α -Mg matrix.

Soldering of Mg Joints Using Zn-Al Solders

Science.gov (United States)

Gancarz, Tomasz; Berent, Katarzyna; Skuza, Wojciech; Janik, Katarzyna

2018-04-01

Magnesium has applications in the automotive and aerospace industries that can significantly contribute to greater fuel economy and environmental conservation. The Mg alloys used in the automotive industry could reduce mass by up to 70 pct, providing energy savings. However, alongside the advantages there are limitations and technological barriers to use Mg alloys. One of the advantages concerns phenomena occurring at the interface when joining materials investigated in this study, in regard to the effect of temperature and soldering time for pure Mg joints. Eutectic Zn-Al and Zn-Al alloys with 0.05 (wt pct) Li and 0.2 (wt pct) Na were used in the soldering process. The process was performed for 3, 5, and 8 minutes of contact, at temperatures of 425 °C, 450 °C, 475 °C, and 500 °C. Selected, solidified solder-substrate couples were cross-sectioned, and their interfacial microstructures were investigated by scanning electron microscopy. The experiment was designed to demonstrate the effect of time, temperature, and the addition of Li and Na on the kinetics of the dissolving Mg substrate. The addition of Li and Na to eutectic Zn-Al caused to improve mechanical properties. Higher temperatures led to reduced joint strength, which is caused by increased interfacial reaction.

Mg co-ordination with potential carcinogenic molecule acrylamide: Spectroscopic, computational and cytotoxicity studies

Science.gov (United States)

Singh, Ranjana; Mishra, Vijay K.; Singh, Hemant K.; Sharma, Gunjan; Koch, Biplob; Singh, Bachcha; Singh, Ranjan K.

2018-03-01

Acrylamide (acr) is a potential toxic molecule produced in thermally processed food stuff. Acr-Mg complex has been synthesized chemically and characterized by spectroscopic techniques. The binding sites of acr with Mg were identified by experimental and computational methods. Both experimental and theoretical results suggest that Mg coordinated with the oxygen atom of Cdbnd O group of acr. In-vitro cytotoxicity studies revealed significant decrease in the toxic level of acr-Mg complex as compared to pure acr. The decrease in toxicity on complexation with Mg may be a useful step for future research to reduce the toxicity of acr.

Comparison of the efficacy and safety of rosuvastatin 10 mg and atorvastatin 20 mg in high-risk patients with hypercholesterolemia – Prospective study to evaluate the Use of Low doses of the Statins Atorvastatin and Rosuvastatin (PULSAR

Directory of Open Access Journals (Sweden)

García Hugo

2006-12-01

Full Text Available Abstract Background Many patients at high risk of cardiovascular disease do not achieve recommended low-density lipoprotein cholesterol (LDL-C goals. This study compared the efficacy and safety of low doses of rosuvastatin (10 mg and atorvastatin (20 mg in high-risk patients with hypercholesterolemia. Methods A total of 996 patients with hypercholesterolemia (LDL-C ≥ 3.4 and Results Rosuvastatin 10 mg reduced LDL-C levels significantly more than atorvastatin 20 mg at week 6 (44.6% vs. 42.7%, p Conclusion In high-risk patients with hypercholesterolemia, rosuvastatin 10 mg was more efficacious than atorvastatin 20 mg at reducing LDL-C, enabling LDL-C goal achievement and improving other lipid parameters. Both treatments were well tolerated.

Transformation of Mg-bearing amorphous calcium carbonate to Mg-calcite - In situ monitoring

Science.gov (United States)

Purgstaller, Bettina; Mavromatis, Vasileios; Immenhauser, Adrian; Dietzel, Martin

2016-02-01

The formation of Mg-bearing calcite via an amorphous precursor is a poorly understood process that is of relevance for biogenic and abiogenic carbonate precipitation. In order to gain an improved insight on the controls of Mg incorporation in calcite formed via an Mg-rich amorphous calcium carbonate (Mg-ACC) precursor, the precipitation of Mg-ACC and its transformation to Mg-calcite was monitored by in situ Raman spectroscopy. The experiments were performed at 25.0 ± 0.03 °C and pH 8.3 ± 0.1 and revealed two distinct pathways of Mg-calcite formation: (i) At initial aqueous Mg/Ca molar ratios ⩽ 1:6, Mg-calcite formation occurs via direct precipitation from solution. (ii) Conversely, at higher initial Mg/Ca molar ratios, Mg-calcite forms via an intermediate Mg-rich ACC phase. In the latter case, the final product is a calcite with up to 20 mol% Mg. This Mg content is significant higher than that of the Mg-rich ACC precursor phase. Thus, a strong net uptake of Mg ions from the solution into the crystalline precipitate throughout and also subsequent to ACC transformation is postulated. Moreover, the temporal evolution of the geochemical composition of the reactive solution and the Mg-ACC has no significant effect on the obtained ;solubility product; of Mg-ACC. The enrichment of Mg in calcite throughout and subsequent to Mg-ACC transformation is likely affected by the high aqueous Mg/Ca ratio and carbonate alkalinity concentrations in the reactive solution. The experimental results have a bearing on the formation mechanism of Mg-rich calcites in marine early diagenetic environments, where high carbonate alkalinity concentrations are the rule rather than the exception, and on the insufficiently investigated inorganic component of biomineralisation pathways in many calcite secreting organisms.

Selective laser melting of carbon/AlSi10Mg composites: Microstructure, mechanical and electronical properties

Energy Technology Data Exchange (ETDEWEB)

Zhao, Xiao; Song, Bo, E-mail: bosong@hust.edu.cn; Fan, Wenrui; Zhang, Yuanjie; Shi, Yusheng

2016-04-25

Carbon nanotubes/AlSi10Mg composites has drawn lots of attention in structural engineering and functional device applications due to its extraordinary high elastic modulus and mechanical strength as well as excellent electrical and thermal conductivities. In this study, the CNTs/AlSi10Mg composites was firstly prepared and then processed by selective laser melting. The powder preparation, SLM process, and microstructure evolution, properties were clarified. The results showed that CNTs were decomposed due to the direct interaction with the laser beam. The SLMed composites displayed a similar microstructure to that of SLMed AlSi10Mg. The common brittleness phase Al{sub 4}C{sub 3} didn't form, and the carbon dispersion strengthening was observed. The electrical resistivity of the composites was reduced significantly and the hardness was improved. - Highlights: • Carbon nanotubes/AlSi10Mg powder were prepared by slurry ball milling process. • Carbon nanotubes/AlSi10Mg composites were firstly prepared by SLM. • The electrical resistivity of the composites was significantly reduced and hardness was improved.

Impact of Mg content on native point defects in Mg{sub x}Zn{sub 1−x}O (0 ≤ x ≤ 0.56)

Energy Technology Data Exchange (ETDEWEB)

Perkins, J.; Foster, G. M. [Department of Physics, The Ohio State University, 191 West Woodruff Ave., Columbus, Ohio 43210 (United States); Myer, M.; Mehra, S. [Columbus School for Girls, 56 S. Columbia Ave., Columbus, Ohio 43209 (United States); Chauveau, J. M. [Centre de Recherche sur l’Hetero-Epitaxie et ses Applications, Centre National de la Recherche Scientifique (CRHEA-CNRS), Rue B. Gregory, F-06560 Valbonne Sophia Antipolis (France); University of Nice Sophia Antipolis, Parc Valrose, F-06102 Nice Cedex 2 (France); Hierro, A. [Dpto. Ingeniería Electrónica and ISOM, Universidad Politécnica de Madrid, Ciudad Universitaria s/n, 28040 Madrid (Spain); Redondo-Cubero, A. [Dpto. Física Aplicada y Centro de Micro-Análisis de Materiales, Universidad Autónoma de Madrid, 28049 Madrid (Spain); Windl, W. [Department of Materials Science and Engineering, The Ohio State University, 2041 College Road N., Columbus, Ohio 43210 (United States); Brillson, L. J., E-mail: brillson.1@osu.edu [Department of Physics, The Ohio State University, 191 West Woodruff Ave., Columbus, Ohio 43210 (United States); Department of Electrical and Computer Engineering, The Ohio State University, 2015 Neil Avenue, Columbus, Ohio 43210-1272 (United States); Center for Materials Research, The Ohio State University, Columbus, Ohio 43210 (United States)

2015-06-01

We used depth-resolved cathodoluminescence spectroscopy and surface photovoltage spectroscopy to measure the densities, energy levels, and spatial distributions of zinc/magnesium cation and oxygen vacancies in isostructural, single-phase, non-polar Mg{sub x}Zn{sub 1−x}O alloys over a wide (0 ≤ x ≤ 0.56) range. Within this wide range, both defect types exhibit strong Mg content-dependent surface segregation and pronounced bulk density minima corresponding to unit cell volume minima, which can inhibit defect formation due to electrostatic repulsion. Mg in ZnO significantly reduces native defect densities and their non-polar surface segregation, both major factors in carrier transport and doping of these oxide semiconductors.

Significant enhancement of thermoelectric properties and metallization of Al-doped Mg2Si under pressure

International Nuclear Information System (INIS)

Morozova, Natalia V.; Korobeinikov, Igor V.; Karkin, Alexander E.; Shchennikov, Vladimir V.; Ovsyannikov, Sergey V.; Takarabe, Ken-ichi; Mori, Yoshihisa; Nakamura, Shigeyuki

2014-01-01

We report results of investigations of electronic transport properties and lattice dynamics of Al-doped magnesium silicide (Mg 2 Si) thermoelectrics at ambient and high pressures to and beyond 15 GPa. High-quality samples of Mg 2 Si doped with 1 at. % of Al were prepared by spark plasma sintering technique. The samples were extensively examined at ambient pressure conditions by X-ray diffraction studies, Raman spectroscopy, electrical resistivity, magnetoresistance, Hall effect, thermoelectric power (Seebeck effect), and thermal conductivity. A Kondo-like feature in the electrical resistivity curves at low temperatures indicates a possible magnetism in the samples. The absolute values of the thermopower and electrical resistivity, and Raman spectra intensity of Mg 2 Si:Al dramatically diminished upon room-temperature compression. The calculated thermoelectric power factor of Mg 2 Si:Al raised with pressure to 2–3 GPa peaking in the maximum the values as high as about 8 × 10 −3 W/(K 2 m) and then gradually decreased with further compression. Raman spectroscopy studies indicated the crossovers near ∼5–7 and ∼11–12 GPa that are likely related to phase transitions. The data gathered suggest that Mg 2 Si:Al is metallized under moderate pressures between ∼5 and 12 GPa.

Prenatal prochloraz treatment significantly increases pregnancy length and reduces offspring weight but does not affect social-olfactory memory in rats.

Science.gov (United States)

Dmytriyeva, Oksana; Klementiev, Boris; Berezin, Vladimir; Bock, Elisabeth

2013-07-01

Metabolites of the commonly used imidazole fungicide prochloraz are androgen receptor antagonists. They have been shown to block androgen-driven development and compromise reproductive function. We tested the effect of prochloraz on cognitive behavior following exposure to this fungicide during the perinatal period. Pregnant Wistar rats were administered a 200 mg/kg dose of prochloraz on gestational day (GD) 7, GD11, and GD15. The social recognition test (SRT) was performed on 7-week-old male rat offspring. We found an increase in pregnancy length and a significantly reduced pup weight on PND15 and PND40 but no effect of prenatal prochloraz exposure on social investigation or acquisition of social-olfactory memory. Copyright © 2012 Elsevier GmbH. All rights reserved.

Investigating the hydrological significance of stalagmite geochemistry (Mg, Sr) using Sr isotope and particulate element records across the Late Glacial-to-Holocene transition

Science.gov (United States)

Belli, R.; Borsato, A.; Frisia, S.; Drysdale, R.; Maas, R.; Greig, A.

2017-02-01

The trace element and Sr isotope records in two coeval stalagmites characterized by different growth rates and flow regimes at Savi cave (Grotta Savi, NE Italy) reveal different sources and incorporation mechanisms for Mg and Sr. Mg is sourced primarily from dissolved cave host rock while particulate Mg derived from soil plays a subordinate role. The presence of particulate-borne Mg is inferred from the co-variation of Mg and particle-associated elements (Th, Al and Mn) which are preferentially concentrated in open columnar calcite layers. Variation in Mg concentrations corrected for particle-influenced components, the Mgc parameter, is controlled by water-rock interaction, with higher and lower Mgc during dry and wet phases, respectively. This is thought to reflect incongruent dissolution of Mg-rich phases. Correction of Sr concentrations for contributions from airborne exogenic Sr, based on 87Sr/86Sr ratios, yields the bedrock-only contribution (Src). Src variation in stalagmite calcite is influenced by speleothem growth rate and by variation of the calcite-water Sr partitioning in wet and dry phases, and only to a minor extent by incongruent dissolution of Mg-rich phases. Concentration profiles for Mgc and Srcg (corrected for growth rate effects) show inverse correlations and are inferred to show hydrological significance which is captured in a hydrological index, HI. We suggest HI provides robust information on water-rock interaction related to hydrological changes and can be utilized in both wet and semi-arid environments, provided the corrections for soil Mg and exogenic Sr can be applied with confidence. Application of the HI index allows correction of Grotta Savi oxygen isotope data, to yield a δ18Oc time series that shows when changes in moisture sources and atmospheric reorganization, or changes in moisture amount, were significant. This is especially evident during the Younger Dryas (YD). The Savi record supports the concept of a two-phase YD, marked by

Susceptibility testing for welding of AlMg alloys intended for extrusion

Directory of Open Access Journals (Sweden)

J. Borowski

2016-07-01

Full Text Available The objective of research was to determine the weldability, using Tungsten Inert Gas (TIG of extruded sections made of hard-deformable 5xxx series aluminum alloys with differing magnesium content, i.e. AlMg3, AlMg4,5, AlMg5, AlMg7. Welded joints were obtained as a result of a welding process consisting of several steps. Only welds characterized by very good appearance and quality were selected for tests. As a result of conducted research, TIG welding parameters were determined for sections with a thickness of 8 mm. It was observed that alloys of differing Mg content are characterized by high weldability and do not exhibit a significant reduction of the yield point. Moreover, joints exhibit uniform hardness distribution in the welded joint and heat-affected zone. Tensile strength is reduced.

Insight into destabilization mechanism of Mg-based hydrides interstitially co-doped with nonmetals: a DFT study

Science.gov (United States)

Wu, Zhen; Zhu, Luying; Yang, Fusheng; Zhang, Zaoxiao; Nyamsi, Serge N.

2018-04-01

Mg-based metal hydride is one of the most promising materials for hydrogen energy storage. However, the high thermal stability due to strong bonding effects between the atoms limits its practical application. In order to reduce the thermal stability, a method of doping double nonmetals into Mg-based system was proposed in this study. The density functional theory (DFT) calculation results showed that the thermal stabilities of both the B-N co-doped Mg-based alloy and its hydride are reduced compared with pure Mg-based system. The relative formation enthalpies of the alloy and its hydride are 0.323 and 0.595 eV atom-1, respectively. The values are much higher than those for either singly B- or N-doped Mg-based system. The more significant destabilization by doping double nonmetal elements than single element is mainly attributed to a dual effect in weakening Mg-Ni/NiH4 bonds, caused by criss-cross interactions between B-Ni and N-Mg bonds.

Preliminary study of the characteristics of a high Mg containing Al-Mg-Si alloy

International Nuclear Information System (INIS)

Yan, F; McKay, B J; Fan, Z; Chen, M F

2012-01-01

An Al-20Mg-4Si high Mg containing alloy has been produced and its characteristics investigated. The as-cast alloy revealed primary Mg 2 Si particles evenly distributed throughout an α-Al matrix with a β-Al 3 Mg 2 fully divorced eutectic phase observed in interdendritic regions. The Mg 2 Si particles displayed octahedral, truncated octahedral, and hopper morphologies. Additions of Sb, Ti and Zr had a refining influence reducing the size of the Mg 2 Si from 52 ± 4 μm to 25 ± 0.1 μm, 35 ± 1 μm and 34 ± 1 μm respectively. HPDC tensile test samples could be produced with a 0.6 wt.% Mn addition which prevented die soldering. Solution heating for 1 hr was found to dissolve the majority of the Al 3 Mg 2 eutectic phase with no evidence of any effect on the primary Mg 2 Si. Preliminary results indicate that the heat treatment has a beneficial effect on the elongation and the UTS.

Photosynthetic capacity, nutrient status and growth of maize (Zea mays L. upon MgSO4 leaf-application

Directory of Open Access Journals (Sweden)

Mareike eJezek

2015-01-01

Full Text Available The major plant nutrient magnesium is involved in numerous physiological processes and its deficiency can severely reduce the yield and quality of crops. Since Mg availability in soil and uptake into the plant is often limited by unfavorable soil or climatic conditions, application of Mg onto leaves, the site with highest physiological Mg demand, might be a reasonable alternative fertilization strategy. This study aimed to investigate, if MgSO4 leaf-application in practically relevant amounts can efficiently alleviate the effects of Mg starvation in maize, namely reduced photosynthesis capacity, disturbed ion homeostasis and growth depression. Results clearly demonstrated that Mg deficiency could be mitigated by MgSO4 leaf-application as efficiently as by resupply of MgSO4 via the roots in vegetative maize plants. Significant increases in SPAD values and net rate of CO2-assimilation as well as enhanced shoot biomass have been achieved. Ion analysis furthermore revealed an improvement of the nutrient status of Mg-deficient plants with regard to [Mg], [K] and [Mn] in distinct organs, thereby reducing the risk of Mn-toxicity at the rootside, which often occurs together with Mg deficiency on acid soils. In conclusion, foliar fertilization with Mg proved to be an efficient strategy to adequately supply maize plants with magnesium and might hence be of practical relevance to correct nutrient deficiencies during the growing season.

Nicotine chewing gum (2 mg, 4 mg) and cigarette smoking: comparative effects upon vigilance and heart rate.

Science.gov (United States)

Parrott, A C; Winder, G

1989-01-01

Sixteen male smokers, abstinent the morning before testing, were assessed under four conditions: placebo chewing gum, 2 mg nicotine chewing gum, 4 mg nicotine gum, and cigarette smoking. Placebo gum was administered in the cigarette condition, while sham smoking occurred in the gum conditions. Pre-drug administration and post-drug difference scores were calculated for each assessment measure: rapid visual information processing (RVIP), memory for new information, and heart rate. Nicotine raised heart rate in a significant monotonic dose-related manner (P less than 0.001): placebo +0.2; 2 mg gum +5.1; 4 mg gum +9.8; cigarette +17.5 bpm. Rapid visual information processing target detections were also significantly related to dose (P less than 0.01), with this increased vigilance significant under 4 mg nicotine gum and cigarette smoking. Memory task performance was not significantly affected. Self-reported feelings of alertness/energy were higher while smoking than under placebo or 4 mg gum. Complaints about the taste of the 4 mg nicotine gum were frequent.

Citral reduces nociceptive and inflammatory response in rodents

Directory of Open Access Journals (Sweden)

Lucindo J. Quintans-Júnior

2011-04-01

Full Text Available Citral (CIT, which contains the chiral enantiomers, neral (cis and geranial (trans, is the majority monoterpene from Lippia alba and Cymbopogon citratus. The present study aimed to evaluate CIT for antinociceptive and anti-inflammatory activities in rodents. Antinociceptive and anti-inflammatory effects were studied by measuring nociception through acetic acid and formalin tests, while inflammation was verified by inducing peritonitis and paw edema with carrageenan. All tested doses of CIT had significant protection (p<0.001 against acetic acid (0.8% induced nociceptive behavior and the effects were also similar to morphine while formalin induced nociception was significantly protected (p<0.05 only at higher dose (200 mg/kg of CIT in the first phase of the test. CIT significantly reduce (p<0.001 nociceptive behavior emanating from inflammation in second phase at all the doses.The pretreatment with CIT (100 and 200 mg/kg significantly reduced the paw edema induced by carrageenan. Moreover, systemic treatment with CIT (100 and 200 mg/kg significantly reduced (p<0.001 the leukocyte migration in the carrageenan-induced migration to the peritoneal cavity. Our investigation shows that CIT possess significant central and peripheral antinociceptive effects. It was also verified an anti-inflammatory activity. All together these results suggest that CIT might represent important tool for treatment of painful conditions.

Citral reduces nociceptive and inflammatory response in rodents

Directory of Open Access Journals (Sweden)

Lucindo J. Quintans-Júnior

2011-06-01

Full Text Available Citral (CIT, which contains the chiral enantiomers, neral (cis and geranial (trans, is the majority monoterpene from Lippia alba and Cymbopogon citratus. The present study aimed to evaluate CIT for antinociceptive and anti-inflammatory activities in rodents. Antinociceptive and anti-inflammatory effects were studied by measuring nociception through acetic acid and formalin tests, while inflammation was verified by inducing peritonitis and paw edema with carrageenan. All tested doses of CIT had significant protection (p<0.001 against acetic acid (0.8% induced nociceptive behavior and the effects were also similar to morphine while formalin induced nociception was significantly protected (p<0.05 only at higher dose (200 mg/kg of CIT in the first phase of the test. CIT significantly reduce (p<0.001 nociceptive behavior emanating from inflammation in second phase at all the doses.The pretreatment with CIT (100 and 200 mg/kg significantly reduced the paw edema induced by carrageenan. Moreover, systemic treatment with CIT (100 and 200 mg/kg significantly reduced (p<0.001 the leukocyte migration in the carrageenan-induced migration to the peritoneal cavity. Our investigation shows that CIT possess significant central and peripheral antinociceptive effects. It was also verified an anti-inflammatory activity. All together these results suggest that CIT might represent important tool for treatment of painful conditions.

The significance of reduced respiratory chain enzyme activities: clinical, biochemical and radiological associations.

Science.gov (United States)

Mordekar, S R; Guthrie, P; Bonham, J R; Olpin, S E; Hargreaves, I; Baxter, P S

2006-03-01

Mitochondrial diseases are an important group of neurometabolic disorders in children with varied clinical presentations and diagnosis that can be difficult to confirm. To report the significance of reduced respiratory chain enzyme (RCE) activity in muscle biopsy samples from children. Retrospective odds ratio was used to compare clinical and biochemical features, DNA studies, neuroimaging, and muscle biopsies in 18 children with and 48 without reduced RCE activity. Children with reduced RCE activity were significantly more likely to have consanguineous parents, to present with acute encephalopathy and lactic acidaemia and/or within the first year of life; to have an axonal neuropathy, CSF lactate >4 mmol/l; and/or to have signal change in the basal ganglia. There were positive associations with a maternal family history of possible mitochondrial cytopathy; a presentation with failure to thrive and lactic acidaemia, ragged red fibres, reduced fibroblast fatty acid oxidation and with an abnormal allopurinol loading test. There was no association with ophthalmic abnormalities, deafness, epilepsy or myopathy. The association of these clinical, biochemical and radiological features with reduced RCE activity suggests a possible causative link.

Tensile and Compressive Responses of Ceramic and Metallic Nanoparticle Reinforced Mg Composites

Directory of Open Access Journals (Sweden)

Quy Bau Nguyen

2013-05-01

Full Text Available In the present study, room temperature mechanical properties of pure magnesium, Mg/ZrO2 and Mg/(ZrO2 + Cu composites with various compositions are investigated. Results revealed that the use of hybrid (ZrO2 + Cu reinforcements in Mg led to enhanced mechanical properties when compared to that of single reinforcement (ZrO2. Marginal reduction in mechanical properties of Mg/ZrO2 composites were observed mainly due to clustering of ZrO2 particles in Mg matrix and lack of matrix grain refinement. Addition of hybrid reinforcements led to grain size reduction and uniform distribution of hybrid reinforcements, globally and locally, in the hybrid composites. Macro- and micro- hardness, tensile strengths and compressive strengths were all significantly increased in the hybrid composites. With respect to unreinforced magnesium, failure strain was almost unchanged under tensile loading while it was reduced under compressive loading for both Mg/ZrO2 and Mg/(ZrO2 + Cu composites.

Semipolar (202̅1) III-Nitride P-Down LEDs with in situ anneal to reduce the Mg memory effect

Science.gov (United States)

Forman, C.; Leonard, J.; Yonkee, B.; Pynn, C.; Mates, T.; Cohen, D.; Farrell, R.; Margalith, T.; DenBaars, S.; Speck, J.; Nakamura, S.

2017-04-01

P-down LEDs (PDLEDs) have the potential to open up new design schemes for III-nitride LEDs compared to conventional n-down LEDs (NDLEDs). For light emitters operating above 480 nm, the PDLED design enables the epitaxial advantages of semipolar (202̅1) and gains the polarization benefits of semipolar (202̅1̅). Here, we investigated semipolar (202̅1) InGaN-based PDLEDs in terms of their photoluminescence (PL) spectra and compositional profile. Despite concerns of the Mg memory effect degrading PDLED performance due to Mg-related non-radiative recombination centers, the PL intensities were nearly identical between the NDLED and PDLEDs, which emitted at wavelengths centered near 500 nm. Secondary ion mass spectrometry revealed that the Mg doping levels in the multiple quantum well (MQW) active region were comparable for each structure, with average values of 2.9×1018 cm-3 for the NDLED and 1.8×1018 cm-3 for the PDLED. Prior to growing the active region MQW, a 700 °C in situ anneal was carried out to reduce the average Mg concentration in the PDLED MQW to 3.7×1017 cm-3. Its hydrogen concentration remained at 5×1019 cm-3 in the p-type GaN region, which suggests that hydrogen passivation occurs during the growth of subsequent epitaxial layers in ammonia.

Four-phonon scattering significantly reduces intrinsic thermal conductivity of solids

Science.gov (United States)

Feng, Tianli; Lindsay, Lucas; Ruan, Xiulin

2017-10-01

For decades, the three-phonon scattering process has been considered to govern thermal transport in solids, while the role of higher-order four-phonon scattering has been persistently unclear and so ignored. However, recent quantitative calculations of three-phonon scattering have often shown a significant overestimation of thermal conductivity as compared to experimental values. In this Rapid Communication we show that four-phonon scattering is generally important in solids and can remedy such discrepancies. For silicon and diamond, the predicted thermal conductivity is reduced by 30% at 1000 K after including four-phonon scattering, bringing predictions in excellent agreement with measurements. For the projected ultrahigh-thermal conductivity material, zinc-blende BAs, a competitor of diamond as a heat sink material, four-phonon scattering is found to be strikingly strong as three-phonon processes have an extremely limited phase space for scattering. The four-phonon scattering reduces the predicted thermal conductivity from 2200 to 1400 W/m K at room temperature. The reduction at 1000 K is 60%. We also find that optical phonon scattering rates are largely affected, being important in applications such as phonon bottlenecks in equilibrating electronic excitations. Recognizing that four-phonon scattering is expensive to calculate, in the end we provide some guidelines on how to quickly assess the significance of four-phonon scattering, based on energy surface anharmonicity and the scattering phase space. Our work clears the decades-long fundamental question of the significance of higher-order scattering, and points out ways to improve thermoelectrics, thermal barrier coatings, nuclear materials, and radiative heat transfer.

Energetics of Mg incorporation at GaN(0001) and GaN(0001¯) surfaces

Science.gov (United States)

Sun, Qiang; Selloni, Annabella; Myers, T. H.; Doolittle, W. Alan

2006-04-01

By using density functional calculations in the generalized gradient approximation, we investigate the energetics of Mg adsorption and incorporation at GaN(0001) and GaN(0001¯) surfaces under various Ga and Mg coverage conditions as well as in presence of light or electron beam-induced electronic excitation. We find significant differences in Mg incorporation between Ga- and N-polar surfaces. Mg incorporation is easier at the Ga-polar surface, but high Mg coverages are found to cause important distortions which locally change the polarity from Ga to N polar. At the N-rich and moderately Ga-rich GaN(0001) surface, 0.25 ML of Mg substituting Ga in the top bilayer strongly reduce the surface diffusion barriers of Ga and N adatoms, in agreement with the surfactant effect observed in experiments. As the Mg coverage exceeds 0.5 ML, partial incorporation in the subsurface region (second bilayer) becomes favorable. A surface structure with 0.5 ML of incorporated Mg in the top bilayer and 0.25 ML in the second bilayer is found to be stable over a wide range of Ga chemical potential. At the Ga bilayer-terminated GaN(0001) surface, corresponding to Ga-rich conditions, configurations where Mg is incorporated in the interface region between the metallic Ga bilayer and the underlying GaN bilayer appear to be favored. At the N-polar surface, Mg is not incorporated under N-rich or moderately Ga-rich conditions, whereas incorporation in the adlayer may take place under Ga-rich conditions. In the presence of light or electron beam induced excitation, energy differences between Mg incorporated at the surface and in deeper layers are reduced so that the tendency toward surface segregation is also reduced.

Effect of Ce on Casting Structure of Near-rapidly Solidified Al-Zn-Mg-Cu Alloy

Directory of Open Access Journals (Sweden)

HUANG Gao-ren

2017-11-01

Full Text Available Through using XRD,DSC,SEM,EDS and other modern analysis methods, the effects of rare earth element Ce on microstructure and solidification temperature of Al-Zn-Mg-Cu under different cooling rates were studied, the principle of Ce on grain refining and melt cleaning of alloys was analyzed and discussed. The results show that MgZn2 phase and α-Al matrix are the main precipitations, Al,Cu,Mg and other elements dissolve in MgZn2 phase, a new phase Mg(Zn, Cu, Al2 is formed, solute elements in the grain boundary have higher concentration, eutectic reaction takes place between MgZn2 and α-Al, lamellar eutectic structure is generated. The addition of Ce decreases the dendritic arm spacing,reduces the layer spacing between eutectic phases and refines the eutectic structure and the grain significantly, and inhibits the appearance of the impurity phase Al7Cu2Fe in aluminum alloys. The addition of Ce also reduces the precipitation temperature of α-Al matrix and eutectic phase by 6.4℃ and 5.6℃ respectively.

Atorvastatin 10 mg plus ezetimibe 10mg compared with atorvastatin 20 mg: impact on the lipid profile in Japanese patients with abnormal glucose tolerance and coronary artery disease.

Science.gov (United States)

Uemura, Yusuke; Watarai, Masato; Ishii, Hideki; Koyasu, Masayoshi; Takemoto, Kenji; Yoshikawa, Daiji; Shibata, Rei; Matsubara, Tatsuaki; Murohara, Toyoaki

2012-01-01

Oxidized low-density lipoprotein (LDL) cholesterol is a sensitive lipid marker for predicting atherosclerosis. Ezetimibe and statins are reported to decrease both LDL cholesterol and oxidized LDL cholesterol. This prospective randomized open-label crossover study compared combination therapy with atorvastatin plus ezetimibe versus high-dose atorvastatin monotherapy. Changes in serum lipids, including malondialdehyde-modified LDL (MDA-LDL) as a representative form of oxidized LDL cholesterol, and glucose metabolism were assessed. The subjects were 39 Japanese patients with coronary artery disease and type 2 diabetes or impaired glucose tolerance who were taking 10 mg/day of atorvastatin (30 men and 9 women with a mean age of 67.8 years). They were randomized to a group that first received add-on ezetimibe (10 mg/day) or a group that first received atorvastatin monotherapy at a higher dose of 20 mg/day. Both treatments were given for 12 weeks each in a crossover fashion. Add-on ezetimibe significantly decreased MDA-LDL (109.0 ± 31.9 mg/dl to 87.7 ± 29.4 mg/dl, p=0.0009), while up-titration of atorvastatin did not. The decrease with add-on ezetimibe was significantly greater than with up-titration of atorvastatin (p=0.0006). Total cholesterol and LDL cholesterol were significantly decreased by both treatments, but the percent reduction with add-on ezetimibe was significantly greater (pHigh-density lipoprotein cholesterol was significantly increased by both treatments and there was no significant difference between them. The apolipoprotein B/apolipoprotein A-I ratio and remnant-like particle cholesterol were only significantly decreased by add-on ezetimibe. Both treatments caused similar elevation of hemoglobin A(1c). In Japanese patients with type 2 diabetes or impaired glucose tolerance and coronary artery disease, adding ezetimibe (10 mg/day) to atorvastatin (10 mg/day) significantly improved the lipid profile compared with atorvastatin monotherapy at 20 mg

Strength of FePd/MgO and FePt/MgO interfaces from first principles

Science.gov (United States)

Černý, M.

2018-04-01

Cleavage characteristics such as the cleavage energy and the cleavage stress of FePd/MgO and FePt/MgO interfaces are computed from first principles. Considering several possible cleavage planes, the weakest link in these systems is found as the plane with the lowest cleavage stress. This weakest plane is identified in both systems with the interface plane, where the cohesion is reduced by 30% compared to the MgO bulk. Two distinct models of tensile test are employed to verify the results and convergence of computed values with respect to size of the simulation cell is discussed.

Single Low Dose Primaquine (0.25 mg/kg Does Not Cause Clinically Significant Haemolysis in G6PD Deficient Subjects.

Directory of Open Access Journals (Sweden)

Germana Bancone

Full Text Available Primaquine is the only drug consistently effective against mature gametocytes of Plasmodium falciparum. The transmission blocking dose of primaquine previously recommended was 0.75 mg/kg (adult dose 45 mg but its deployment was limited because of concerns over haemolytic effects in patients with glucose-6-phosphate dehydrogenase (G6PD deficiency. G6PD deficiency is an inherited X-linked enzymatic defect that affects an estimated 400 million people around the world with high frequencies (15-20% in populations living in malarious areas. To reduce transmission in low transmission settings and facilitate elimination of P. falciparum, the World Health Organization now recommends adding a single dose of 0.25 mg/kg (adult dose 15 mg to Artemisinin-based Combination Therapies (ACTs without G6PD testing. Direct evidence of the safety of this low dose is lacking. Adverse events and haemoglobin variations after this treatment were assessed in both G6PD normal and deficient subjects in the context of targeted malaria elimination in a malaria endemic area on the North-Western Myanmar-Thailand border where prevalence of G6PD deficiency (Mahidol variant approximates 15%.The tolerability and safety of primaquine (single dose 0.25 mg base/kg combined with dihydroartemisinin-piperaquine (DHA-PPQ given three times at monthly intervals was assessed in 819 subjects. Haemoglobin concentrations were estimated over the six months preceding the ACT + primaquine rounds of mass drug administration. G6PD deficiency was assessed with a phenotypic test and genotyping was performed in male subjects with deficient phenotypes and in all females. Fractional haemoglobin changes in relation to G6PD phenotype and genotype and primaquine round were assessed using linear mixed-effects models. No adverse events related to primaquine were reported during the trial. Mean fractional haemoglobin changes after each primaquine treatment in G6PD deficient subjects (-5.0%, -4.2% and -4

Grain refinement of Ca addition in a twin-roll-cast Mg-3Al-1Zn alloy

Energy Technology Data Exchange (ETDEWEB)

Jiang Bin, E-mail: jiangbinrong@cqu.edu.cn [National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400030 (China); College of Materials Science and Engineering, Chongqing University, Chongqing 400030 (China); Liu Wenjun [College of Materials Science and Engineering, Chongqing University, Chongqing 400030 (China); Qiu Dong; Zhang Mingxing [Division of Materials, School of Mechanical and Mining Engineering, University of Queensland, St Lucia, QLD 4072 (Australia); Pan Fusheng [National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400030 (China)

2012-04-16

Highlights: Black-Right-Pointing-Pointer Grain refinement of Ca addition in a twin-roll-cast Mg-3Al-1Zn alloy was investigated. Black-Right-Pointing-Pointer Addition of 0.08 wt% Ca into Mg melts can significantly reduce the grain size to 30 {mu}m from 100 {mu}m. Black-Right-Pointing-Pointer Al{sub 2}Ca intermetallic particles have high potency to act as heterogeneous nucleation sites for {alpha}-Mg. - Abstract: Addition of 0.08 wt% Ca into AZ31 melts significantly reduces the average grain size of thin strips produced by twin-roll-cast to 30 {mu}m from 100 {mu}m. Like Zr, due to the high chemical activity, the Ca added into the melts reacts with Al and forms Al{sub 2}Ca intermetallic compound. X-ray diffraction result approves the existence of Al{sub 2}Ca in the thin strips, which formed in the melts. Crystallographic examination of relationship between Al{sub 2}Ca and Mg using the edge-to-edge matching model indicates that Al{sub 2}Ca particles are effective inoculants for heterogeneous nucleation of Mg. It is considered that Al{sub 2}Ca is a potential and effective grain refiner for Mg alloys and the grain refinement through addition of Ca in the AZ31 alloy is attributed to the inoculation effect of Al{sub 2}Ca particles formed in the melts.

Comparison of Efficiencies and Mechanisms of Catalytic Ozonation of Recalcitrant Petroleum Refinery Wastewater by Ce, Mg, and Ce-Mg Oxides Loaded Al2O3

Directory of Open Access Journals (Sweden)

Chunmao Chen

2017-02-01

Full Text Available The use of catalytic ozonation processes (COPs for the advanced treatment of recalcitrant petroleum refinery wastewater (RPRW is rapidly expanding. In this study, magnesium (Mg, cerium (Ce, and Mg-Ce oxide-loaded alumina (Al2O3 were developed as cost efficient catalysts for ozonation treatment of RPRW, having performance metrics that meet new discharge standards. Interactions between the metal oxides and the Al2O3 support influence the catalytic properties, as well as the efficiency and mechanism. Mg-Ce/Al2O3 (Mg-Ce/Al2O3-COP reduced the chemical oxygen demand by 4.7%, 4.1%, 6.0%, and 17.5% relative to Mg/Al2O3-COP, Ce/Al2O3-COP, Al2O3-COP, and single ozonation, respectively. The loaded composite metal oxides significantly increased the hydroxyl radical-mediated oxidation. Surface hydroxyl groups (–OHs are the dominant catalytic active sites on Al2O3. These active surface –OHs along with the deposited metal oxides (Mg2+ and/or Ce4+ increased the catalytic activity. The Mg-Ce/Al2O3 catalyst can be economically produced, has high efficiency, and is stable under acidic and alkaline conditions.

Alterations of Mg2+ After Hemorrhagic Shock.

Science.gov (United States)

Lee, Mun-Young; Yang, Dong Kwon; Kim, Shang-Jin

2017-11-01

Hemorrhagic shock is generally characterized by hemodynamic instability with cellular hypoxia and diminishing cellular function, resulting from an imbalance between systemic oxygen delivery and consumption and redistribution of fluid and electrolytes. Magnesium (Mg) is the fourth most abundant cation overall and second most abundant intracellular cation in the body and an essential cofactor for the energy production and cellular metabolism. Data for blood total Mg (tMg; free-ionized, protein-bound, and anion-bound forms) and free Mg 2+ levels after a traumatic injury are inconsistent and only limited information is available on hemorrhagic effects on free Mg 2+ as the physiologically active form. The aim of this study was to determine changes in blood Mg 2+ and tMg after hemorrhage in rats identifying mechanism and origin of the changes in blood Mg 2+ . Hemorrhagic shock produced significant increases in blood Mg 2+ , plasma tMg, Na + , K + , Cl - , anion gap, partial pressures of oxygen, glucose, and blood urea nitrogen but significant decreases in RBC tMg, blood Ca 2+ , HCO 3 - , pH, partial pressures of carbon dioxide, hematocrit, hemoglobin, total cholesterol, and plasma/RBC ATP. During hemorrhagic shock, K + , anion gap, and BUN showed significant positive correlations with changes in blood Mg 2+ level, while Ca 2+ , pH, and T-CHO correlated to Mg 2+ in a negative manner. In conclusion, hemorrhagic shock induced an increase in both blood-free Mg 2+ and tMg, resulted from Mg 2+ efflux from metabolic damaged cell with acidosis and ATP depletion.

The effectiveness of reducing the daily dose of finasteride in men with benign prostatic hyperplasia

Directory of Open Access Journals (Sweden)

Geller Jack

2002-01-01

Full Text Available Abstract Background Finasteride, a 5 alpha reductase inhibitor, is an established treatment for benign prostatic hyperplasia. The recommended dosage is 5 mg a day, however case reports have show effectiveness with lower doses. The objective of the current study was to determine in men with benign prostatic hyperplasia, previously treated for at least one year with finasteride 5 mg daily, if they will maintain subjective and objective improvements in urinary obstruction when treated with 2.5 mg of finasteride daily for one year. Methods In an open label, prospective study, 40 men with benign prostatic hyperplasia, previously treated for at least one year with 5 mg of finasteride, took 2.5 mg of finasteride daily for one year. Measurements included AUA symptom score, maximum flow rate, voided volume and PSA. Results There were no significant changes in maximum flow rate, voided volume, or AUA symptom score after one year of finasteride 2.5 mg daily therapy. PSA increased significantly, p Conclusions The daily dose of finasteride can be reduced to 2.5 mg daily without significant effect on subjective and objective measures of urinary obstruction. Although statistically significant increases in PSA are noted when reducing the daily finasteride dose from 5 mg to 2.5 mg, the clinical significance of a mean .6 ng/ml increase in PSA is questionable.

Significance of grain boundaries and stacking faults on hydrogen storage properties of Mg2Ni intermetallics processed by high-pressure torsion

International Nuclear Information System (INIS)

Hongo, Toshifumi; Edalati, Kaveh; Arita, Makoto; Matsuda, Junko; Akiba, Etsuo; Horita, Zenji

2015-01-01

Mg 2 Ni intermetallics are processed using three different routes to produce three different microstructural features: annealing at high temperature for coarse grain formation, severe plastic deformation through high-pressure torsion (HPT) for nanograin formation, and HPT processing followed by annealing for the introduction of stacking faults. It is found that both grain boundaries and stacking faults are significantly effective to activate the Mg 2 Ni intermetallics for hydrogen storage at 423 K (150 °C). The hydrogenation kinetics is also considerably enhanced by the introduction of large fractions of grain boundaries and stacking faults while the hydrogenation thermodynamics remains unchanged. This study shows that, similar to grain boundaries and cracks, stacking faults can act as quick pathways for the transportation of hydrogen in the hydrogen storage materials

Transport properties and exponential n-values of Fe/MgB2 tapes with various MgB2 particle sizes

International Nuclear Information System (INIS)

Lezza, P.; Abaecherli, V.; Clayton, N.; Senatore, C.; Uglietti, D.; Suo, H.L.; Fluekiger, R.

2004-01-01

Fe/MgB 2 tapes have been prepared starting with pre-reacted binary MgB 2 powders. As shown by resistive and inductive measurements, the reduction of particle size to a few microns by ball milling has little influence on B c2 , while the superconducting properties of the individual MgB 2 grains are essentially unchanged. Reducing the particle size causes an enhancement of B irr from 14 to 16 T, while J c has considerably increased at high fields, its slope J c (B) being reduced. At 4.2 K, values of 5.3 x 10 4 and 1.2 x 10 3 A/cm 2 were measured at 3.5 and 10 T, respectively, suggesting a dominant role of the conditions at the grain interfaces. A systematic variation of these conditions at the interfaces is undertaken in order to determine the limit of transport properties for Fe/MgB 2 tapes. The addition of 5% Mg to MgB 2 powder was found to affect neither J c nor B c2 . For the tapes with the highest J c values, very high exponential n factors were measured: n=148, 89 and 17 at 3.5, 5 and 10 T, respectively and measurements of critical current versus applied strain have been performed. The mechanism leading to high transport critical current densities of filamentary Fe/MgB 2 tapes based on MgB 2 particles is discussed

Experimental research on electric field jump in low magnetic fields: Detection of damage in new ex-situ MgB{sub 2} barriers in MgB{sub 2} wires

Energy Technology Data Exchange (ETDEWEB)

Gajda, D., E-mail: dangajda@op.pl [International Laboratory of High Magnetic Fields and Low Temperatures, Gajowicka 95, 53-421 Wroclaw (Poland); Morawski, A. [Institute of High Pressure Physics, Polish Academy of Sciences, Sokolowska 29/37, 01-142 Warszawa (Poland); Zaleski, A. [Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Okólna 2, 50-422 Wroclaw (Poland); Hossain, M.S.A. [Institute for Superconducting and Electronic Materials, AIIM, University of Wollongong, North Wollongong, NSW 2519 (Australia); Rindfleisch, M. [Hyper Tech Research, Inc, 1275 Kinnear Road, Columbus, OH 43212 (United States); Cetner, T. [Institute of High Pressure Physics, Polish Academy of Sciences, Sokolowska 29/37, 01-142 Warszawa (Poland)

2015-10-25

We explored the incorporation of field sweep (constant current and rapidly increasing magnetic field) into the four-probe method as a new technique to detect defects in barrier layers in superconducting MgB{sub 2} wires. This method allows us to observe jumps in the electric field in low magnetic fields. The scanning electron microscopy results indicate that such a jump originates from cracks in Nb barriers and ex-situ MgB{sub 2} barriers. Our research indicates that the field sweep allows us to detect damage to barriers that are made of superconducting materials. This method can be the basis for an industrial method for detecting damages in MgB{sub 2} wires. These defects reduce the critical current of MgB{sub 2} wire. Detection and removal of these defects will allow us to produce MgB{sub 2} wires with ex-situ MgB{sub 2} and Nb barriers that will have improved critical current density. Manufacturing of MgB{sub 2} wires with new ex-situ MgB{sub 2} barriers is a new technological concept. This type of barrier is cheaper and easier to manufacture, leading to cheaper MgB{sub 2} wires. Moreover, we show that critical current can be measured by two methods: current sweep (constant magnetic field and quickly increasing current) and field sweep. - Graphical abstract: Our results indicate that the jump electric field low magnetic fields. This jump indicates damage in Nb and ex situ MgB{sub 2} barrier. Detection and removal of defects will increase J{sub c} in MgB{sub 2} wires and will increase the applicability of MgB{sub 2} wire. - Highlights: • Jump electric field in the 1 T indicates damage to the Nb barrier. • Jump resistance at 9 K indicates damage to the Nb barrier. • Jump electric field in low magnetic field indicates damage to ex situ MgB{sub 2} barrier. • Damage Nb and ex situ MgB{sub 2} barrier significantly reduces the critical current density in the MgB{sub 2} wire.

Low-energy resonances in sup 25 Mg(p,. gamma. ) sup 26 Al, sup 26 Mg(p,. gamma. ) sup 27 Al and sup 27 Al(p,. gamma. ) sup 28 Si

Energy Technology Data Exchange (ETDEWEB)

Iliadis, C; Schange, T; Rolfs, C; Schroeder, U; Somorjai, E; Trautvetter, H P; Wolke, K [Muenster Univ. (Germany, F.R.). Inst. fuer Kernphysik; Endt, P M; Kikstra, S W [Rijksuniversiteit Utrecht (Netherlands). Robert van de Graaff Lab.; Champagne, A E [Princeton Univ., NJ (USA). Dept. of Physics; Arnould, M; Paulus, G [Universite Libre de Bruxelles (Belgium). Inst. d' Astronomie et d' Astrophysique

1990-06-11

Gamma-ray decay schemes have been measured with bare and Compton-suppressed Ge detectors at low-energy resonances (E{sub p}<340 keV) in the (p, {gamma}) reactions on {sup 25}Mg, {sup 26}Mg and {sup 27}Al. Althogether 58 new decay branches have been observed and a new {sup 26}Mg(p, {gamma}){sup 27}Al resonance has been found at E{sub p}=154.5{plus minus}1.0 keV. The new branchings lead to J{sup {pi}}; T determinations (or limitations) for two states in {sup 26}Al and four states in {sup 28}Si. The absolute strengths of the {sup 25}Mg(p, {gamma}){sup 26}Al and {sup 26}Mg(p, {gamma}){sup 27}Al resonances have also been obtained, and the uncertainties of the stellar rates, deduced from the available data for both reactions, are significantly reduced. Some astrophysical consequences are discussed. (orig.).

Use of porous MgO in pyrochemical applications

International Nuclear Information System (INIS)

Maiya, P.S.; Sweeney, S.M.; Carroll, L.A.; Dusek, J.T.

1994-11-01

Pyrochemical methods for the extraction of transuranic elements from light water reactor spent fuel require a reduction step in which the oxide fuel is reduced to metals by Li in molten LiCl. The Li 2 O formed is electrolytically reduced to metal in a cell that uses a carbon (or inert) anode and a Li cathode to recycle the salt and minimize the waste. Use of a carbon anode causes carbon dust that interferes with the process. Moreover, current efficiency is reduced as a result of oxidation of Li to Li 2 O by CO 2 . A porous MgO shroud around the anode was found to obviate these problems. Porous MgO crucibles and rectangular bar specimens were fabricated from MgO powders (electrically fused MgO, reagent grade MgO were mixed in appropriate combinations with a binder and lubricant). Particle size, force applied to the powders during cold pressing, and sintering temperature were varied to achieve a total porosity of >45% (mostly open porosity) and to control pore size and pore distribution. Mercury intrusion porosimetry was used to determine the pore size and pore size distribution. Flexural strength is observed to be proportional to the square root of pore size, which is consistent with fracture mechanics

The Microstructure and Tensile Properties of a Newly Developed Mg-Al/Mg3Sb2 In Situ Composite in As-Cast and Extruded Conditions

Science.gov (United States)

Montajabnia, A.; Pourbahari, B.; Emamy, M.

2018-04-01

The microstructures and tensile properties of Mg-x wt%Al-y wt%Sb alloys have been studied where x/y ratio was 1 and Sb(Al) contents were 5, 10, 15 and 20 wt%, respectively. The results indicated that by increasing Sb(Al) content, not only the crystals of primary Mg3Sb2 alter from small flake-like particles to polygonal or needle-like morphology, but also the eutectic structure changes from semi-continuous network in Mg-5Al-5Sb to continuous network in Mg-20Sb-20Al alloy. The results obtained from thermal analysis revealed different peaks related to the formation of Mg3Sb2 as primary phase and eutectic structure containing Mg17Al12 + Al3Mg2 intermetallic phases. Further results also revealed that Sb(Al) additions change the solidification performance of the material by depressing the Mg3Sb2 nucleation temperature, reducing solidification range and widening eutectic area. Tensile testing results showed that with the increase in Sb (Al) content, ultimate tensile strength (UTS) and elongation values of the alloys are decreased in as-cast condition. But, significant improvement in the UTS and elongation values of the extruded specimens was attributed to the severe fragmentation of intermetallic phases and well distributed fine particles in the matrix which provided proper obstacles for dislocation motion. It was interesting to note that the fracture behavior of intermetallic particles was found to be different, while Mg3Sb2 was ductile, intermetallic compounds in eutectic regions were brittle.

Inulin significantly improves serum magnesium levels in proton pump inhibitor-induced hypomagnesaemia.

Science.gov (United States)

Hess, M W; de Baaij, J H F; Broekman, M; Bisseling, T M; Haarhuis, B; Tan, A; Te Morsche, R; Hoenderop, J G J; Bindels, R J M; Drenth, J P H

2016-06-01

Proton pump inhibitors (PPI) are among the most widely prescribed drugs to treat gastric acid-related disorders. PPI-induced hypomagnesaemia, a defect in intestinal absorption of Mg(2+) , can be a severe side effect of chronic PPI use. To restore serum Mg(2+) concentrations in PPI-induced hypomagnesaemia patients by dietary supplementation with inulin fibres. Eleven patients with PPI-induced hypomagnesaemia and 10 controls were treated with inulin (20 g/day). Each trial consisted of two cycles of 14-day inulin treatment followed by a washout period of 14 days. Patients continued to use their PPI. Serum Mg(2+) levels served as the primary endpoint. Inulin significantly enhanced serum Mg(2+) levels from 0.60 to 0.68 mmol/L in PPI-induced hypomagnesaemia patients, and from 0.84 to 0.93 mmol/L in controls. As a consequence 24 h urinary Mg(2+) excretion was significantly increased in patients with PPI-induced hypomagnesaemia (0.3-2.2 mmol/day). Symptoms related to hypomagnesaemia, including muscle cramps and paraesthesia, were reduced during intervention with inulin. Inulin increases serum Mg(2+) concentrations under PPI maintenance in patients with PPI-induced hypomagnesaemia. © 2016 John Wiley & Sons Ltd.

Interface and thickness dependent domain switching and stability in Mg doped lithium niobate

Energy Technology Data Exchange (ETDEWEB)

Neumayer, Sabine M.; Rodriguez, Brian J., E-mail: gallo@kth.se, E-mail: brian.rodriguez@ucd.ie [School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland); Conway Institute of Biomolecular and Biomedical Research, University College Dublin, Belfield, Dublin 4 (Ireland); Ivanov, Ilia N. [Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); Manzo, Michele; Gallo, Katia, E-mail: gallo@kth.se, E-mail: brian.rodriguez@ucd.ie [Department of Applied Physics, KTH-Royal Institute of Technology, Roslagstullbacken 21, 10691 Stockholm (Sweden); Kholkin, Andrei L. [Department of Physics and CICECO-Aveiro Institute of Materials, 3810-193 Aveiro (Portugal); Institute of Natural Sciences, Ural Federal University, 620000 Ekaterinburg (Russian Federation)

2015-12-14

Controlling ferroelectric switching in Mg doped lithium niobate (Mg:LN) is of fundamental importance for optical device and domain wall electronics applications that require precise domain patterns. Stable ferroelectric switching has been previously observed in undoped LN layers above proton exchanged (PE) phases that exhibit reduced polarization, whereas PE layers have been found to inhibit lateral domain growth. Here, Mg doping, which is known to significantly alter ferroelectric switching properties including coercive field and switching currents, is shown to inhibit domain nucleation and stability in Mg:LN above buried PE phases that allow for precise ferroelectric patterning via domain growth control. Furthermore, piezoresponse force microscopy (PFM) and switching spectroscopy PFM reveal that the voltage at which polarization switches from the “up” to the “down” state increases with increasing thickness in pure Mg:LN, whereas the voltage required for stable back switching to the original “up” state does not exhibit this thickness dependence. This behavior is consistent with the presence of an internal frozen defect field. The inhibition of domain nucleation above PE interfaces, observed in this study, is a phenomenon that occurs in Mg:LN but not in undoped samples and is mainly ascribed to a remaining frozen polarization in the PE phase that opposes polarization reversal. This reduced frozen depolarization field in the PE phase also influences the depolarization field of the Mg:LN layer above due to the presence of uncompensated polarization charge at the PE-Mg:LN boundary. These alterations in internal electric fields within the sample cause long-range lattice distortions in Mg:LN via electromechanical coupling, which were corroborated with complimentary Raman measurements.

Improved hydrogen storage properties of MgH2 catalyzed with TiO2

Science.gov (United States)

Jangir, Mukesh; Meena, Priyanka; Jain, I. P.

2018-05-01

In order to improve the hydrogenation properties of the MgH2, various concentration of rutile Titanium Oxide (TiO2) (X wt%= 5, 10, 15 wt %) is added to MgH2 by ball milling and the catalytic effect of TiO2 on hydriding/dehydriding properties of MgH2 has been investigated. Result shows that the TiO2 significantly reduced onset temperature of desorption. Onset temperature as low as 190 °C were observed for the MgH2-15 wt% TiO2 sample which is 60 °C and 160 °C lower than the as-milled and as-received MgH2. Fromm the Kissinger plot the activation energy of 15 wt% TiO2 added sample is calculated to be -75.48 KJ/mol. These results indicate that the hydrogenation properties of MgH2-TiO2 have been improved compared to the as-milled and as-received MgH2. Furthermore, XRD and XPS were performed to characterize the structural evolution upon milling and dehydrogenation.

Encapsulation of Mg-Zr alloy in metakaolin-based geo-polymer

International Nuclear Information System (INIS)

Rooses, Adrien; Steins, Prune; Dannoux-Papin, Adeline; Lambertin, David; Poulesquen, Arnaud; Frizon, Fabien

2013-01-01

Investigations were carried out to propose a suitable material for the encapsulation of Mg-Zr alloy wastes issued from fuel cladding of the first generation nuclear reactors. Stability over time, good mechanical properties and low gas production are the main requirements that embedding matrices must comply with in order to be suitable for long run storage. One of the main issues encapsulating Mg-Zr alloy in mineral binder is the hydrogen production related to Mg-Zr alloys corrosion and water radiolysis process. In this context, metakaolin geo-polymers offer an interesting outlook: corrosion densities of Mg-Zr alloys are significantly lower than in Portland cement. This work firstly presents the hydrogen production of Mg-Zr alloy embedded in geo-polymers prepared from different the activation solution (NaOH or KOH). The effect of addition of fluorine on the magnesium corrosion in geo-polymer has been investigated too. The results point out that sodium geo-polymer is a suitable binder for Mg-Zr alloy encapsulation with respect to magnesium corrosion resistance. Furthermore the presence of fluorine reduces significantly the hydrogen release. Then, the impact of fluorine on the geo-polymer network formation was studied by rheological, calorimetric and 19 F NMR measurements. No direct effect resulting from the addition of fluorine has been shown on the geo-polymer binder. Secondly, the formulation of the encapsulation matrix has been adjusted to fulfil the expected physical and mechanical properties. Observations, dimensional evolutions and compressive strengths demonstrated that addition of sand to the geo-polymer binder is efficient to meet the storage criteria. Consequently, a matrix formulation compatible with Mg-Zr alloy encapsulation has been proposed. Finally, irradiation tests have been carried out to assess the hydrogen radiolytic yield of the matrix under exposure to γ radiation. (authors)

Catalytically Enhanced Hydrogen Sorption in Mg-MgH2 by Coupling Vanadium-Based Catalyst and Carbon Nanotubes

Directory of Open Access Journals (Sweden)

Atikah Kadri

2015-06-01

Full Text Available Mg (MgH2-based composites, using carbon nanotubes (CNTs and pre-synthesized vanadium-based complex (VCat as the catalysts, were prepared by high-energy ball milling technique. The synergistic effect of coupling CNTs and VCat in MgH2 was observed for an ultra-fast absorption rate of 6.50 wt. % of hydrogen per minute and 6.50 wt. % of hydrogen release in 10 min at 200 °C and 300 °C, respectively. The temperature programmed desorption (TPD results reveal that coupling VCat and CNTs reduces both peak and onset temperatures by more than 60 °C and 114 °C, respectively. In addition, the presence of both VCat and CNTs reduces the enthalpy and entropy of desorption of about 7 kJ/mol H2 and 11 J/mol H2·K, respectively, as compared to those of the commercial MgH2, which ascribe to the decrease of desorption temperature. From the study of the effect of CNTs milling time, it is shown that partially destroyed CNTs (shorter milling time are better to enhance the hydrogen sorption performance.

THE EFFECTS OF HALIDE MODIFIERS ON THE SORPTION KINETICS OF THE LI-MG-N-H SYSTEM

Energy Technology Data Exchange (ETDEWEB)

Anton, D.; Gray, J.; Price, C.; Lascola, R.

2011-07-20

The effects of different transition metal halides (TiCl{sub 3}, VCl{sub 3}, ScCl{sub 3} and NiCl{sub 2}) on the sorption properties of the 1:1 molar ratio of LiNH{sub 2} to MgH{sub 2} are investigated. The modified mixtures were found to contain LiNH{sub 2}, MgH{sub 2} and LiCl. TGA results showed that the hydrogen desorption temperature was reduced with the modifier addition in this order: TiCl{sub 3} > ScCl{sub 3} > VCl{sub 3} > NiCL{sub 2}. Ammonia release was not significantly reduced resulting in a weight loss greater than the theoretical hydrogen storage capacity of the material. The isothermal sorption kinetics of the modified systems showed little improvement after the first dehydrogenation cycle over the unmodified system but showed drastic improvement in rehydrogenation cycles. X-ray diffraction and Raman spectroscopy identified the cycled material to be composed of LiH, MgH{sub 2}, Mg(NH{sub 2}){sub 2} and Mg{sub 3}N{sub 2}.

THE AFFECTS OF HALIDE MODIFIERS ON THE SORPTION KINETICS OF THE LI-MG-N-H SYSTEM

Energy Technology Data Exchange (ETDEWEB)

Erdy, C.; Gray, J.; Lascola, R.; Anton, D.

2010-12-16

In this present work, the affects of different transition metal halides (TiCl{sub 3}, VCl{sub 3}, ScCl{sub 3} and NiCl{sub 2}) on the sorption properties of the 1:1 molar ratio of LiNH{sub 2} to MgH{sub 2} are investigated. The modified mixtures were found to contain LiNH{sub 2}, MgH{sub 2} and LiCl. TGA results showed that the hydrogen desorption temperature was reduced with the modifier addition in this order: TiCl{sub 3}>ScCl{sub 3}>VCl{sub 3}>NiCl{sub 2}. Ammonia release was not significantly reduced resulting in a weight loss greater than the theoretical hydrogen storage capacity of the material. The isothermal sorption kinetics of the modified systems showed little improvement after the first dehydrogenation cycle over the unmodified system but showed drastic improvement in rehydrogenation cycles. XRD and Raman spectroscopy identified the cycled material to be composed of LiH, MgH{sub 2}, Mg(NH{sub 2}){sub 2} and Mg{sub 3}N{sub 2}.

Positronium hydride in hydrogen-laden thermochemically reduced MgO single crystals

Science.gov (United States)

Pareja, R.; de La Cruz, R. M.; Pedrosa, M. A.; González, R.; Chen, Y.

1990-04-01

Thermochemical reduction of hydrogen-laden MgO single crystals at T~2400 K results in a large concentration of both hydride (H-) ions and anion vacancies (>1024 m-3). Positron-lifetime experiments of these crystals provide evidence for bound positronium hydride states also referred to as [e+-H-] or PsH states. The presence of the anion vacancies was found to inhibit the formation of these states. After thermally annealing out these vacancies, such that H- concentration remains intact, two long-lived components appear in the lifetime spectrum. Furthermore, these two components correlate with the presence of the H-ions. These results suggest the existence of bound [e+-H-] states when positrons are trapped by the H- ions, and the subsequent formation of positronium (Ps) states by the dissociation of the [e+-H-] states. From the values of the intermediate lifetime component, a value of (570+/-50) ps is obtained for the lifetime of the PsH state located in an anion vacancy in MgO. The longest lifetime component ~(1-3) ns is attributed to pick-off annihilation of ortho-Ps states.

Chondroitin sulfate reduces the friction coefficient of articular cartilage.

Science.gov (United States)

Basalo, Ines M; Chahine, Nadeen O; Kaplun, Michael; Chen, Faye H; Hung, Clark T; Ateshian, Gerard A

2007-01-01

The objective of this study was to investigate the effect of chondroitin sulfate (CS)-C on the frictional response of bovine articular cartilage. The main hypothesis is that CS decreases the friction coefficient of articular cartilage. Corollary hypotheses are that viscosity and osmotic pressure are not the mechanisms that mediate the reduction in the friction coefficient by CS. In Experiment 1, bovine articular cartilage samples (n=29) were tested in either phosphate buffered saline (PBS) or in PBS containing 100mg/ml of CS following 48h incubation in PBS or in PBS+100mg/ml CS (control specimens were not subjected to any incubation). In Experiment 2, samples (n=23) were tested in four different solutions: PBS, PBS+100mg/ml CS, and PBS+polyethylene glycol (PEG) (133 or 170mg/ml). In Experiment 3, samples (n=18) were tested in three solutions of CS (0, 10 and 100mg/ml). Frictional tests (cartilage-on-glass) were performed under constant stress (0.5MPa) for 3600s and the time-dependent friction coefficient was measured. Samples incubated or tested in a 100mg/ml CS solution exhibited a significantly lower equilibrium friction coefficient than the respective PBS control. PEG solutions delayed the rise in the friction coefficient relative to the PBS control, but did not reduce the equilibrium value. Testing in PBS+10mg/ml of CS did not cause any significant decrease in the friction coefficient. In conclusion, CS at a concentration of 100mg/ml significantly reduces the friction coefficient of bovine articular cartilage and this mechanism is neither mediated by viscosity nor osmolarity. These results suggest that direct injection of CS into the joint may provide beneficial tribological effects.

Chloral hydrate sedation in radiology: retrospective audit of reduced dose

International Nuclear Information System (INIS)

Bracken, Jennifer; Heaslip, Ingrid; Ryan, Stephanie

2012-01-01

Chloral hydrate (CH) is safe and effective for sedation of suitable children. The purpose of this study was to assess whether adequate sedation is achieved with reduced CH doses. We retrospectively recorded outpatient CH sedations over 1 year. We defined standard doses of CH as 50 mg/kg (infants) and 75 mg/kg (children >1 year). A reduced dose was defined as at least 20% lower than the standard dose. In total, 653 children received CH sedation (age, 1 month-3 years 10 months), 42% were given a reduced initial dose. Augmentation dose was required in 10.9% of all children, and in a higher proportion of children >1 year (15.7%) compared to infants (5.7%; P 1 year (95.3%; P = 0.03). A reduced initial dose had no negative effect on outcome (P = 0.19) or time to sedation. No significant complications were seen. We advocate sedation with reduced CH doses (40 mg/kg for infants; 60 mg/kg for children >1 year of age) for outpatient imaging procedures when the child is judged to be quiet or sleepy on arrival. (orig.)

Phase formation in Mg-Sn-Si and Mg-Sn-Si-Ca alloys

Energy Technology Data Exchange (ETDEWEB)

Kozlov, A.; Groebner, J. [Institute of Metallurgy, Clausthal University of Technology, Robert-Koch-Str. 42, D-38678 Clausthal-Zellerfeld (Germany); Schmid-Fetzer, R., E-mail: schmid-fetzer@tu-clausthal.de [Institute of Metallurgy, Clausthal University of Technology, Robert-Koch-Str. 42, D-38678 Clausthal-Zellerfeld (Germany)

2011-02-17

Research highlights: > The solidification paths of ternary and quaternary alloys are analyzed in detail, using the tool of thermodynamic calculations. > The precipitation sequence of phases and their amounts compare well with the microstructure of alloys. > The most efficient comparison to the experimental thermal analysis data is done by calculation of the enthalpy variation with temperature. > The viability of a procedure for the selection of multicomponent key samples is demonstrated for the development of the Mg-Ca-Si-Sn phase diagram. - Abstract: Experimental work is done and combined with the Calphad method to generate a consistent thermodynamic description of the Mg-Ca-Si-Sn quaternary system, validated for Mg-rich alloys. The viability of a procedure for the selection of multicomponent key samples is demonstrated for this multicomponent system. Dedicated thermal analysis with DTA/DSC on sealed samples is performed and the microstructure of slowly solidified alloys is analyzed using SEM/EDX. The thermodynamic description and phase diagram of the ternary Mg-Si-Sn system, developed in detail also in this work, deviates significantly from a previous literature proposal. The phase formation in ternary and quaternary alloys is analyzed using the tool of thermodynamic equilibrium and Scheil calculations for the solidification paths and compared with present experimental data. The significant ternary/quaternary solid solubilities of pertinent intermetallic phases are quantitatively introduced in the quaternary Mg-Ca-Si-Sn phase diagram and validated by experimental data.

A double-blind study comparing ibuprofen 1800 mg or 2400 mg daily and placebo in sports injuries.

Science.gov (United States)

Hutson, M A

1986-01-01

In a double-blind, placebo-controlled study of forty-six patients with acute ligamentous damage of the knee, ibuprofen in dosages 1800 mg and 2400 mg produced significant improvements in joint mobility, weight bearing ability and match fitness. Joint effusion, pain on stress and pain severity was significantly improved by all three treatments. Only two patients reported side-effects (one while taking placebo and one taking ibuprofen 2400 mg). The study confirmed the efficacy and excellent tolerance to ibuprofen in patients with sports injuries to the knee.

Defect kinetics in spinels: Long-time simulations of MgAl2O4, MgGa2O4, and MgIn2O4

International Nuclear Information System (INIS)

Uberuaga, B. P.; Voter, A. F.; Sickafus, K. E.; Bacorisen, D.; Smith, Roger; Ball, J. A.; Grimes, R. W.

2007-01-01

Building upon work in which we examined defect production and stability in spinels, we now turn to defect kinetics. Using temperature accelerated dynamics (TAD), we characterize the kinetics of defects in three spinel oxides: magnesium aluminate MgAl 2 O 4 , magnesium gallate MgGa 2 O 4 , and magnesium indate MgIn 2 O 4 . These materials have varying tendencies to disorder on the cation sublattices. In order to understand chemical composition effects, we first examine defect kinetics in perfectly ordered, or normal, spinels, focusing on point defects on each sublattice. We then examine the role that cation disorder has on defect mobility. Using TAD, we find that disorder creates local environments which strongly trap point defects, effectively reducing their mobility. We explore the consequences of this trapping via kinetic Monte Carlo (KMC) simulations on the oxygen vacancy (V O ) in MgGa 2 O 4 , finding that V O mobility is directly related to the degree of inversion in the system

High temperature mechanical forming of Mg alloys

International Nuclear Information System (INIS)

Mwembela, A.; McQueen, H.J.; Myshlyaev, M.

2002-01-01

Mg alloys are hot worked in the range 180-450 o C and 0.0-10 s -1 ; the present project data are compared with a wide selection of published results. The flow stresses and their dependence on temperature and strain rate are fairly similar to simple Al alloys: however, the hot ductility is much lower (≤3 in torsion). Twinning plays a significant role in Mg alloys almost independently of temperature; the twins initiate at low strains in grains poorly oriented for basal slip and in consequence become well disposed for such slip. As T rises, there is increasing formation of subgrains that spread toward the grain centers from grain and twin boundaries: this is indicative of stress concentrations inducing non-basal sup which helps provide the geometrically necessary dislocations. Above about 240 o C, dynamic (DRX) nucleates at grain and twin boundaries, preferentially at intersections; this again is evidence of non-basal slip that provides the highly misoriented cells. The boundaries in which further strain concentrates producing further DRX. The microstructure remains very heterogeneous compared to the uniform dynamically recovered substructure in Al alloys, thus giving rise to the reduced ductility. These results are employed to interpret the mechanical and microstructural behavior of Mg alloys in extrusion, rolling and forging. (author)

Perbandingan Pengaruh Pemberian Granisetron 1 mg Intravena dengan Plasebo (Salin untuk Mencegah Kejadian Menggigil Pascaanestesi Spinal pada Seksio Sesarea

Directory of Open Access Journals (Sweden)

Heru Wishnu Manunggal

2014-08-01

Full Text Available Post anesthesia shivering is one of the complications that often occur in anesthetic action. The purpose of this study was to assess the administration of intravenous granisetron 1 mg in reducing the incidence of shivering in patients undergoing caesarean section with spinal anesthesia. Clinical research methods in double-blind randomized controlled 38 patients who underwent seksios esarea at Dr. Hasan Sadikin Hospital Bandung during April–September 2011, aged 20–35 years overall status American Society of Anesthesia (ASA II physical and random into two groups: the group that received granisetron 1 mg intravenously or saline prior to spinal anesthesia with bupivacaine 12.5 mg. Incidence of shivering recorded by degrees 0–4. The results showed statistically significant patient characteristic data and core body temperature did not differ between the two groups. Shivering less in granisetron group (21.1% than the placebo group (52.6% with statistically significant results (p<0.05.The conclusions of this study indicate that administration of granisetron 1 mg intravenously before spinal anesthesia in Caesarean section reduces the incidence of shivering postanesthesia

Comparison of the Effect of Naftopidil 75 mg and Tamsulosin 0.2 mg on the Bladder Storage Symptom With Benign Prostatic Hyperplasia: Prospective, Multi-institutional Study.

Science.gov (United States)

Kwon, Se Yun; Lee, Kyung Seop; Yoo, Tag Keun; Chung, Jae Il; Lee, Ji Youl; Hong, Jun Hyuk; Seo, Seong Il; Jung, Tae Young; Kwak, Cheol; Kang, Taek Won; Yun, Seok-Joong

2018-01-01

To compare the efficacies of naftopidil and tamsulosin in terms of reducing storage symptoms in patients with benign prostatic hyperplasia. This prospective randomized study was performed at 10 centers. Ninety-four patients that had been taking tamsulosin for more than 8 weeks, but had an Overactive Bladder Symptom Score (OABSS) of greater than 3 points, were initially enrolled. After a 1-week washout period, patients were divided into 2 groups. Forty-five patients were treated with tamsulosin 0.2 mg daily, and 49 patients were treated with naftopidil 75 mg daily for 8 weeks. Total International Prostate Symptoms Score (IPSS), storage symptom scores, nocturia times, OABSS, maximal flow rates (Q max ), and postvoid residual volumes were checked before and after the 8-week treatment period. Mean patient ages in the tamsulosin and naftopidil groups were 64.8 and 66.0 years, respectively. Baseline characteristics were not significantly different. In the tamsulosin group, mean total IPSS decreased from 19.1 to 15.1 after the 8-week treated period (P = .001), and in the naftopidil group, mean total IPSS decreased from 16.9 to 13.1 (P = .001). Mean storage symptom scores were reduced in the tamsulosin and naftopidil groups from 8.0 to 6.6 (P = .002) and from 7.6 to 6.1 (P = .001), respectively. Mean nocturia times in the naftopidil groups decreased significantly from 2.5 to 1.9 (P = .001), and mean OABSSs were reduced from 7.7 to 6.0 (P = .001) and from 7.4 to 6.0 (P = .001), respectively. Total IPSS, storage symptom scores, nocturia times, and OABSS were significantly reduced by naftopidil and tamsulosin. Moreover, the naftopidil group showed better improvements in nocturia than the tamsulosin group. Copyright © 2017 Elsevier Inc. All rights reserved.

Silymarin and vitamin E reduce amiodarone-induced lysosomal phospholipidosis in rats

International Nuclear Information System (INIS)

Agoston, Marta; Oersi, Ferenc; Feher, Erzsebet; Hagymasi, Krisztina; Orosz, Zsuzsa; Blazovics, Anna; Feher, Janos; Vereckei, Andras

2003-01-01

Several antioxidants have been shown to reduce lysosomal phospholipidosis, which is a potential mechanism of amiodarone toxicity, and prevent amiodarone toxicity by antioxidant and/or non-antioxidant mechanisms. The aim of this study was to test whether the co-administration of two structurally different antioxidants vitamin E and silymarin with amiodarone can reduce amiodarone-induced lysosomal phospholipidosis, and if yes, by reducing the tissue concentration of amiodarone and desethylamiodarone or by their antioxidant action. To this end, male Fischer 344 rats were treated by gavage once a day for 3 weeks and randomly assigned to the following four experimental groups: 1, control; 2, amiodarone (150 mg/(kg per day)); 3, amiodarone (150 mg/(kg per day)) plus vitamin E (100 mg/(kg per day)); 4, amiodarone (150 mg/(kg per day)) plus silymarin (60 mg/(kg per day)) treated groups. Total plasma phospholipid (PL), liver-conjugated diene, thiobarbituric acid reactive substances (TBARSs), amiodarone and desethylamiodarone concentrations were determined and the extent of lysosomal phospholipidosis in the liver was estimated by a semi-quantitative electron microscopic method. Amiodarone treatment increased significantly the liver-conjugated diene (P<0.001), TBARS (P=0.012), plasma total PL (P<0.001) concentrations compared with control. Antioxidants combined with amiodarone significantly decreased the liver-conjugated diene (P<0.001 for both), TBARS (P=0.016 for vitamin E, P=0.053 borderline for silymarin) and plasma total PL (P=0.058 borderline for vitamin E, P<0.01 for silymarin) concentrations compared with amiodarone treatment alone. Silymarin significantly (P=0.021) reduced liver amiodarone, but only tended to decrease desethylamiodarone concentration; however, vitamin E failed to do so. Amiodarone treatment increased lysosomal phospholipidosis (P<0.001) estimated by semi-quantitative electron microscopic method and both antioxidants combined with amiodarone reduced

Mesoscale Modeling of Kinetic Phase Behaviors in Mg-B-H (Subcontract Report)

Energy Technology Data Exchange (ETDEWEB)

Yu, H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Thornton, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wood, B. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-13

Storage of hydrogen on board vehicles is one of the critical enabling technologies for creating hydrogenfueled transportation systems that can reduce oil dependency and mitigate the long-term effects of fossil fuels on climate change. Stakeholders in developing hydrogen infrastructure are currently focused on highpressure storage at 350 bar and 700 bar, in part because no viable solid-phase storage material has emerged. Nevertheless, solid-state materials, including high-density hydrides, remain of interest because of their unique potential to meet all DOE targets and deliver hydrogen at lower pressures and higher on-board densities. A successful solution would significantly reduce costs and ensure the economic viability of a U.S. hydrogen infrastructure. The Mg(BH₄)₂-MgB₂ system represents a highly promising solution because of its reasonable reaction enthalpy, high intrinsic capacity, and demonstrated reversibility, yet suffers from poor reaction kinetics. This subcontract aims to deliver a phase-field model for the kinetics of the evolution of the relevant phases within the Mg-B-H system during hydrogenation and dehydrogenation. This model will be used within a broader theory, synthesis, and characterization framework to study the properties of geometry-selected nanoparticles of pristine and doped MgB₂/Mg(BH₄)₂ with two aims: (1) understand the intrinsic limitations in (de)hydrogenation; (2) devise strategies for improving thermodynamics and kinetics through nanostructuring.

Male circumcision significantly reduces prevalence and load of genital anaerobic bacteria.

Science.gov (United States)

Liu, Cindy M; Hungate, Bruce A; Tobian, Aaron A R; Serwadda, David; Ravel, Jacques; Lester, Richard; Kigozi, Godfrey; Aziz, Maliha; Galiwango, Ronald M; Nalugoda, Fred; Contente-Cuomo, Tania L; Wawer, Maria J; Keim, Paul; Gray, Ronald H; Price, Lance B

2013-04-16

Male circumcision reduces female-to-male HIV transmission. Hypothesized mechanisms for this protective effect include decreased HIV target cell recruitment and activation due to changes in the penis microbiome. We compared the coronal sulcus microbiota of men from a group of uncircumcised controls (n = 77) and from a circumcised intervention group (n = 79) at enrollment and year 1 follow-up in a randomized circumcision trial in Rakai, Uganda. We characterized microbiota using16S rRNA gene-based quantitative PCR (qPCR) and pyrosequencing, log response ratio (LRR), Bayesian classification, nonmetric multidimensional scaling (nMDS), and permutational multivariate analysis of variance (PerMANOVA). At baseline, men in both study arms had comparable coronal sulcus microbiota; however, by year 1, circumcision decreased the total bacterial load and reduced microbiota biodiversity. Specifically, the prevalence and absolute abundance of 12 anaerobic bacterial taxa decreased significantly in the circumcised men. While aerobic bacterial taxa also increased postcircumcision, these gains were minor. The reduction in anaerobes may partly account for the effects of circumcision on reduced HIV acquisition. The bacterial changes identified in this study may play an important role in the HIV risk reduction conferred by male circumcision. Decreasing the load of specific anaerobes could reduce HIV target cell recruitment to the foreskin. Understanding the mechanisms that underlie the benefits of male circumcision could help to identify new intervention strategies for decreasing HIV transmission, applicable to populations with high HIV prevalence where male circumcision is culturally less acceptable.

Effects of Mg pre-flow, memory, and diffusion on the growth of p-GaN with MOCVD (Conference Presentation)

Science.gov (United States)

Tu, Charng-Gan; Chen, Hao-Tsung; Chen, Sheng-Hung; Chao, Chen-Yao; Kiang, Yean-Woei; Yang, Chih-Chung

2017-02-01

In MOCVD growth, two key factors for growing a p-type structure, when the modulation growth or delta-doping technique is used, include Mg memory and diffusion. With high-temperature growth (>900 degree C), doped Mg can diffuse into the under-layer. Also, due to the high-pressure growth and growth chamber coating in MOCVD, plenty Mg atoms exist in the growth chamber for a duration after Mg supply is ended. In this situation, Mg doping continues in the following designated un-doped layers. In this paper, we demonstrate the study results of Mg preflow, memory, and diffusion. The results show that pre-flow of Mg into the growth chamber can lead to a significantly higher Mg doping concentration in growing a p-GaN layer. In other words, a duration for Mg buildup is required for high Mg incorporation. Based on SIMS study, we find that with the pre-flow growth, a high- and a low-doping p-GaN layer are formed. The doping concentration difference between the two layers is about 10 times. The thickness of the high- (low-) doping layer is about 40 (65) nm. The growth of the high-doping layer starts 10-15 min after Mg supply starts (Mg buildup time). The diffusion length of Mg into the AlGaN layer beneath (Mg content reduced to doping concentration is reduced to <1%.

Corrosion behavior of as-cast binary Mg-Bi alloys in Hank's solution

Directory of Open Access Journals (Sweden)

Wei-li Cheng

2015-11-01

Full Text Available Biodegradable Mg-xBi (x = 3, 6 and 9wt.% alloys were fabricated by ingot casting, and the change of corrosion behavior of the alloys in the Hank's solution was analyzed with respect to the microstructure using optical micrograph (OM, X-ray diffraction (XRD, scanning electron microscope (SEM equipped with an energy dispersive X-ray spectrometer (EDS, electrochemical and immersion tests. The results show that the microstructures of the as-cast Mg-Bi alloys mainly consisted of dendritic ?Mg grains and Mg3Bi2 phase in common, with the secondary dendrite arm spacing (SDAS decreasing significantly from 41.2 靘 to 25.4 靘 and the fraction of Mg3Bi2 increasing from 3.1% to 10.7%. Furthermore, the corrosion rate increasing from 1.32 mm昦-1 to 8.07 mm昦-1 as the Bi content was increased from 3wt.% to 9wt.%. The reduced corrosion resistance was mainly ascribed to the increasing fraction of the second phase particles, which bring positive effects on the development of pitting.

Positronium hydride in hydrogen-laden thermochemically reduced MgO single crystals

International Nuclear Information System (INIS)

Pareja, R.; la Cruz, R.M. de; Pedrosa, M.A.; Gonzalez, R.; Chen, Y.

1990-01-01

Thermochemical reduction of hydrogen-laden MgO single crystals at T∼2400 K results in a large concentration of both hydride (H - ) ions and anion vacancies (>10 24 m -3 ). Positron-lifetime experiments of these crystals provide evidence for bound positronium hydride states also referred to as [e + -H - ] or PsH states. The presence of the anion vacancies was found to inhibit the formation of these states. After thermally annealing out these vacancies, such that H - concentration remains intact, two long-lived components appear in the lifetime spectrum. Furthermore, these two components correlate with the presence of the H - ions. These results suggest the existence of bound [e + -H - ] states when positrons are trapped by the H - ions, and the subsequent formation of positronium (Ps) states by the dissociation of the [e + -H - ] states. From the values of the intermediate lifetime component, a value of (570±50) ps is obtained for the lifetime of the PsH state located in an anion vacancy in MgO. The longest lifetime component ∼(1--3) ns is attributed to pick-off annihilation of ortho-Ps states

Enhanced voltage-controlled magnetic anisotropy in magnetic tunnel junctions with an MgO/PZT/MgO tunnel barrier

Science.gov (United States)

Chien, Diana; Li, Xiang; Wong, Kin; Zurbuchen, Mark A.; Robbennolt, Shauna; Yu, Guoqiang; Tolbert, Sarah; Kioussis, Nicholas; Khalili Amiri, Pedram; Wang, Kang L.; Chang, Jane P.

2016-03-01

Compared with current-controlled magnetization switching in a perpendicular magnetic tunnel junction (MTJ), electric field- or voltage-induced magnetization switching reduces the writing energy of the memory cell, which also results in increased memory density. In this work, an ultra-thin PZT film with high dielectric constant was integrated into the tunneling oxide layer to enhance the voltage-controlled magnetic anisotropy (VCMA) effect. The growth of MTJ stacks with an MgO/PZT/MgO tunnel barrier was performed using a combination of sputtering and atomic layer deposition techniques. The fabricated MTJs with the MgO/PZT/MgO barrier demonstrate a VCMA coefficient, which is ˜40% higher (19.8 ± 1.3 fJ/V m) than the control sample MTJs with an MgO barrier (14.3 ± 2.7 fJ/V m). The MTJs with the MgO/PZT/MgO barrier also possess a sizeable tunneling magnetoresistance (TMR) of more than 50% at room temperature, comparable to the control MTJs with an MgO barrier. The TMR and enhanced VCMA effect demonstrated simultaneously in this work make the MgO/PZT/MgO barrier-based MTJs potential candidates for future voltage-controlled, ultralow-power, and high-density magnetic random access memory devices.

Mechanism of magnetoresistance ratio enhancement in MgO/NiFe/MgO heterostructure by rapid thermal annealing

Science.gov (United States)

Zhao, Chong-Jun; Liu, Yang; Zhang, Jing-Yan; Sun, Li; Ding, Lei; Zhang, Peng; Wang, Bao-Yi; Cao, Xing-Zhong; Yu, Guang-Hua

2012-08-01

To reveal thermal effects on the film quality/microstructure evolution and the resulted magnetoresistance (MR) ratio in MgO/NiFe/MgO heterostructures, positron annihilation spectroscopy studies have been performed. It is found that the ionic interstitials in the MgO layers recombine with the nearby vacancies at lower annealing temperatures (200-300 °C) and lead to a slow increase in sample MR. Meanwhile, vacancy defects agglomeration/removal and ordering acceleration in MgO will occur at higher annealing temperatures (450-550 °C) and the improved MgO and MgO/NiFe interfaces microstructure are responsible for the observed significant MR enhancement.

Quilting after mastectomy significantly reduces seroma formation

African Journals Online (AJOL)

reduce or prevent seroma formation among mastectomy patients ... of this prospective study is to evaluate the effect of surgical quilting ... Seroma was more common in smokers (p=0.003) and was not decreased by the .... explain its aetiology.

Chloral hydrate sedation in radiology: retrospective audit of reduced dose

Energy Technology Data Exchange (ETDEWEB)

Bracken, Jennifer [Children' s University Hospital, Radiology Department, Dublin (Ireland); Royal Children' s Hospital, Department of Medical Imaging, Parkville, Victoria (Australia); Heaslip, Ingrid; Ryan, Stephanie [Children' s University Hospital, Radiology Department, Dublin (Ireland)

2012-03-15

Chloral hydrate (CH) is safe and effective for sedation of suitable children. The purpose of this study was to assess whether adequate sedation is achieved with reduced CH doses. We retrospectively recorded outpatient CH sedations over 1 year. We defined standard doses of CH as 50 mg/kg (infants) and 75 mg/kg (children >1 year). A reduced dose was defined as at least 20% lower than the standard dose. In total, 653 children received CH sedation (age, 1 month-3 years 10 months), 42% were given a reduced initial dose. Augmentation dose was required in 10.9% of all children, and in a higher proportion of children >1 year (15.7%) compared to infants (5.7%; P < 0.001). Sedation was successful in 96.7%, and more frequently successful in infants (98.3%) than children >1 year (95.3%; P = 0.03). A reduced initial dose had no negative effect on outcome (P = 0.19) or time to sedation. No significant complications were seen. We advocate sedation with reduced CH doses (40 mg/kg for infants; 60 mg/kg for children >1 year of age) for outpatient imaging procedures when the child is judged to be quiet or sleepy on arrival. (orig.)

The Effectiveness of Al-Si Coatings for Preventing Interfacial Reaction in Al-Mg Dissimilar Metal Welding

Science.gov (United States)

Wang, Yin; Al-Zubaidy, Basem; Prangnell, Philip B.

2018-01-01

The dissimilar welding of aluminum to magnesium is challenging because of the rapid formation of brittle intermetallic compounds (IMC) at the weld interface. An Al-Si coating interlayer was selected to address this problem, based on thermodynamic calculations which predicted that silicon would change the reaction path to avoid formation of the normally observed binary Al-Mg IMC phases ( β-Al3Mg2 and γ-Al12Mg17). Long-term static heat treatments confirmed that a Si-rich coating will preferentially produce the Mg2Si phase in competition with the less stable, β-Al3Mg2 and γ-Al12Mg17 binary IMC phases, and this reduced the overall reaction layer thickness. However, when an Al-Si clad sheet was tested in a real welding scenario, using the Refill™ friction stir spot welding (FSSW) technique, Mg2Si was only produced in very small amounts owing to the much shorter reaction time. Surprisingly, the coating still led to a significant reduction in the IMC reaction layer thickness and the welds exhibited enhanced mechanical performance, with improved strength and fracture energy. This beneficial behavior has been attributed to the softer coating material both reducing the welding temperature and giving rise to the incorporation of Si particles into the reaction layer, which toughened the brittle interfacial IMC phases during crack propagation.

Superior critical current density obtained in MgB_2 bulks via employing carbon-coated boron and minor Cu addition

International Nuclear Information System (INIS)

Peng, Junming; Liu, Yongchang; Ma, Zongqing; Shahriar Al Hossain, M.; Xin, Ying; Jin, Jianxun

2016-01-01

Highlights: • Usage of carbon-coated boron leads to high level of homogeneous carbon doping. • Cu addition improves MgB_2 grain connectivity, leading to higher J_c at low fields. • Cu addition reduces MgO impurity, also contributing to the improvement of J_c. - Abstract: High performance Cu doped MgB_2 bulks were prepared by an in-situ method with carbon-coated amorphous boron as precursor. It was found that the usage of carbon-coated boron in present work leads to the formation of uniformly refined MgB_2 grains, as well as a high level of homogeneous carbon doping in the MgB_2 samples, which significantly enhance the J_c in both Cu doped and undoped bulks compared to MgB_2 bulks with normal amorphous boron precursor. Moreover, minor Cu can service as activator, and thus facilitates the growth of MgB_2 grains and improves crystallinity and grain connectivity, which can bring about the excellent critical current density (J_c) at self fields and low fields (the best values are 7 × 10"5 A/cm"2 at self fields, and 1 × 10"5 A/cm"2 at 2 T, 20 K, respectively). Simultaneously, minor Cu addition can reduce the amount of MgO impurity significantly, also contributing to the improvement of J_c at low fields. Our work suggests that Cu-activated sintering combined with employment of carbon-coated amorphous boron as precursor could be a promising technique to produce practical MgB_2 bulks or wires with excellent J_c on an industrial scale.

Mifepristone 5 mg versus 10 mg for emergency contraception: double-blind randomized clinical trial

Directory of Open Access Journals (Sweden)

Carbonell JL

2015-01-01

Full Text Available Josep Lluis Carbonell,1 Ramon Garcia,2 Adriana Gonzalez,2 Andres Breto,2 Carlos Sanchez2 1Mediterranea Medica Clinic, Valencia, Spain; 2Eusebio Hernandez Gynecology and Obstetrics Teaching Hospital, Havana, Cuba Purpose: To estimate the efficacy and safety of 5 mg and 10 mg mifepristone for emergency contraception up to 144 hours after unprotected coitus. Methods: This double-blind randomized clinical trial was carried out at Eusebio Hernandez Hospital (Havana, Cuba. A total of 2,418 women who requested emergency contraception after unprotected coitus received either 5 mg or 10 mg mifepristone. The variables for assessing efficacy were the pregnancies that occurred and the fraction of pregnancies that were prevented. Other variables assessed were the side effects of mifepristone, vaginal bleeding, and changes in the date of the following menstruation. Results: There were 15/1,206 (1.2% and 9/1,212 (0.7% pregnancies in the 5 mg and 10 mg group, respectively (P=0.107. There were 88% and 93% prevented pregnancies in the 5 mg and 10 mg group, respectively. The side effect profiles were similar in both groups. Delayed menstruation ≥7 days was experienced by 4.9% and 11.0% of subjects in the 5 mg and 10 mg group, respectively (P=0.001. There was a significant high failure rate for women weighing >75 kg in the 5 mg group. Conclusion: It would be advisable to use the 10 mg dose of mifepristone for emergency contraception as there was a trend suggesting that the failure rate of the larger dose was lower. Keywords: mifepristone, emergency contraception

Age hardening of a sintered Al-Cu-Mg-Si-(Sn) alloy

International Nuclear Information System (INIS)

Kent, D.; Schaffer, G.B.; Drennan, J.

2005-01-01

The age hardening response of a sintered Al-3.8 wt% Cu-1.0 wt% Mg-0.70 wt% Si alloy with and without 0.1 wt% Sn was investigated. The sequence of precipitation was characterised using transmission electron microscopy. The ageing response of the sintered Al-Cu-Mg-Si-(Sn) alloy is similar to that of cognate wrought 2xxx series alloys. Peak hardness was associated with a fine, uniform dispersion of lath shaped precipitates, believed to be either the β'or Q' phase, oriented along α directions and θ' plates lying on {0 0 1} α planes. Natural ageing also resulted in comparable behaviour to that observed in wrought alloys. Porosity in the powder metallurgy alloys did not significantly affect the kinetics of precipitation during artificial ageing. Trace levels of tin, used to aid sintering, slightly reduced the hardening response of the alloy. However, this was compensated for by significant improvements in density and hardness

Influence of ageing treatment on microstructure, mechanical and bio-corrosion properties of Mg-Dy alloys.

Science.gov (United States)

Yang, Lei; Huang, Yuanding; Feyerabend, Frank; Willumeit, Regine; Kainer, Karl Ulrich; Hort, Norbert

2012-09-01

Mg-Dy alloys have shown to be promising for medical applications. In order to investigate the influence of ageing treatment on their mechanical and corrosion properties, three Mg-xDy alloys (x=10, 15, 20 wt%) were prepared. Their microstructure, mechanical and corrosion behavior were investigated. The results indicate that ageing at 250 °C has little influence on the mechanical and corrosion properties. In contrast, ageing at 200 °C significantly increases the yield strength, and reduces the ductility. After ageing at 200 °C, the corrosion rate of Mg-20Dy alloy increases largely in 0.9 wt% NaCl solution, but remains unchanged in cell culture medium. Copyright © 2012 Elsevier Ltd. All rights reserved.

Comparison of the Effect of 800 mg Ibuprofen and 30 mg Predenisolone on Relief of Post Endodontic Pain

Directory of Open Access Journals (Sweden)

S.M. Jalalzadeh

2009-04-01

Full Text Available Introduction & Objective: One of the important problems in dentistry is post endodontic pains .The purpose of this study was comparison of the effect of prophylactic oral ibuprofen 800mg and oral predenisolone 30mg on prevention of post endodontic pain.Materials & Methods: The present study is a double-blind, randomized and controlled trial. It was conducted on 60 patient (16men and 44 women between the ages of 18-63 who needed endodontic treatment. Inclusive criteria for selecting of patients were: need for root canal therapy in one of the posterior teeth, having no systemic problem, no evidence of abscess; not taking analgesic or similar drug for at least 6 hours before treatment. Patients were divided into three experimental groups randomly taking one of the drugs before the treatment {ibuprofen 800 mg, prednisolone30mg and placebo (oral dextrose}. Patients completed VAS at 6,12 and 24 hours post root canal therapy and analyzed using the spss15 by chi-square, ANOVA test and Tukey test.Results: During 24 hours after treatment post endodontic pain is 95%- 100% in the placebo group. The prevalence of no-pain was not significant 6, 12 and 24 hours after treatment between the ibuprofen and predenisolone groups. The mean scale of pain in ibuprofen and predenisolone groups was significantly lower than placebo group 6, 12 and 24 hours after treatment. Differences between the drug groups are significant only on 6 and 12 hours after treatment.Conclusion: Post endodontic pains are present 24 hours after treatment. 6 and 12 hours after treatment 30 mg predenisolone are significantly better for pain relief than 800 mg ibuprofen. But after 24 hours it is not significant.

Electron confinement at diffuse ZnMgO/ZnO interfaces

Directory of Open Access Journals (Sweden)

Maddison L. Coke

2017-01-01

Full Text Available Abrupt interfaces between ZnMgO and ZnO are strained due to lattice mismatch. This strain is relaxed if there is a gradual incorporation of Mg during growth, resulting in a diffuse interface. This strain relaxation is however accompanied by reduced confinement and enhanced Mg-ion scattering of the confined electrons at the interface. Here we experimentally study the electronic transport properties of the diffuse heteroepitaxial interface between single-crystal ZnO and ZnMgO films grown by molecular-beam epitaxy. The spatial extent of the interface region is controlled during growth by varying the zinc flux. We show that, as the spatial extent of the graded interface is reduced, the enhancement of electron mobility due to electron confinement more than compensates for any suppression of mobility due to increased strain. Furthermore, we determine the extent to which scattering of impurities in the ZnO substrate limits the electron mobility in diffuse ZnMgO–ZnO interfaces.

Electron confinement at diffuse ZnMgO/ZnO interfaces

Science.gov (United States)

Coke, Maddison L.; Kennedy, Oscar W.; Sagar, James T.; Warburton, Paul A.

2017-01-01

Abrupt interfaces between ZnMgO and ZnO are strained due to lattice mismatch. This strain is relaxed if there is a gradual incorporation of Mg during growth, resulting in a diffuse interface. This strain relaxation is however accompanied by reduced confinement and enhanced Mg-ion scattering of the confined electrons at the interface. Here we experimentally study the electronic transport properties of the diffuse heteroepitaxial interface between single-crystal ZnO and ZnMgO films grown by molecular-beam epitaxy. The spatial extent of the interface region is controlled during growth by varying the zinc flux. We show that, as the spatial extent of the graded interface is reduced, the enhancement of electron mobility due to electron confinement more than compensates for any suppression of mobility due to increased strain. Furthermore, we determine the extent to which scattering of impurities in the ZnO substrate limits the electron mobility in diffuse ZnMgO-ZnO interfaces.

In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy.

Science.gov (United States)

Zheng, Y F; Gu, X N; Xi, Y L; Chai, D L

2010-05-01

Mg/Ca (1 wt.%, 5 wt.%, 10 wt.% Ca) composites were prepared from pure magnesium and calcium powders using the powder metallurgy method, aiming to enlarge the addition of Ca content without the formation of Mg(2)Ca. The microstructures, mechanical properties and cytotoxicities of Mg/Ca composite samples were investigated. The corrosion of Mg/Ca composites in Dulbecco's modified Eagle's medium (DMEM) for various immersion intervals was studied by electrochemical impedance spectroscopy measurements and environmental scanning electron microscope, with the concentrations of released Mg and Ca ions in DMEM for various immersion time intervals being measured. It was shown that the main constitutional phases were Mg and Ca, which were uniformly distributed in the Mg matrix. The ultimate tensile strength (UTS) and elongation of experimental composites decreased with increasing Ca content, and the UTS of Mg/1Ca composite was comparable with that of as-extruded Mg-1Ca alloy. The corrosion potential increased with increasing Ca content, whereas the current density and the impedance decreased. It was found that the protective surface film formed quickly at the initial immersion stage. With increasing immersion time, the surface film became compact, and the corrosion rate of Mg/Ca composites slowed down. The surface film consisted mainly of CaCO(3), MgCO(3)x3H(2)O, HA and Mg(OH)(2) after 72 h immersion in DMEM. Mg/1Ca and Mg/5Ca composite extracts had no significant toxicity (p>0.05) to L-929 cells, whereas Mg/10Ca composite extract induced approximately 40% reduced cell viability. Copyright (c) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Defibrillator charging before rhythm analysis significantly reduces hands-off time during resuscitation

DEFF Research Database (Denmark)

Hansen, L. K.; Folkestad, L.; Brabrand, M.

2013-01-01

BACKGROUND: Our objective was to reduce hands-off time during cardiopulmonary resuscitation as increased hands-off time leads to higher mortality. METHODS: The European Resuscitation Council (ERC) 2005 and ERC 2010 guidelines were compared with an alternative sequence (ALT). Pulseless ventricular...... physicians were included. All had prior experience in advanced life support. Chest compressions were shorter interrupted using ALT (mean, 6.7 vs 13.0 seconds). Analyzing data for ventricular tachycardia scenarios only, hands-off time was shorter using ALT (mean, 7.1 vs 18.2 seconds). In ERC 2010 vs ALT, 12...... physicians were included. Two physicians had not prior experience in advanced life support. Hands-off time was reduced using ALT (mean, 3.9 vs 5.6 seconds). Looking solely at ventricular tachycardia scenarios, hands-off time was shortened using ALT (mean, 4.5 vs 7.6 seconds). No significant reduction...

Oxotremorine treatment reduces repetitive behaviors in BTBR T+ tf/J mice

Directory of Open Access Journals (Sweden)

Dionisio A. Amodeo

2014-08-01

Full Text Available Repetitive behaviors with restricted interests is one of the core criteria for the diagnosis of autism spectrum disorder (ASD. Current pharmacotherapies that target the dopaminergic or serotonergic systems have limited effectiveness in treating repetitive behaviors. Previous research has demonstrated that administration of muscarinic cholinergic receptor (mAChR antagonists can exacerbate motor stereotypies while mAChR agonists reduce stereotypies. The present study determined whether the mAChR agonist, oxotremorine affected repetitive behaviors in the BTBR T+ tf/J (BTBR mouse model of autism. To test the effects of oxotremorine on repetitive behaviors, marble burying and grooming behavior were measured in BTBR mice and compared to that in C57BL/6J (B6 mice. The effects of oxotremorine on locomotor activity was also measured. Thirty minutes before each test, mice received an intraperitoneal injection of saline, 0.001 mg or 0.01 mg of oxotremorine methiodide. Saline- treated BTBR mice exhibited increased marble burying and self-grooming behavior compared to that of saline-treated B6 mice. Oxotremorine significantly reduced marble burying and self-grooming behavior in BTBR mice, but had no significant effect in B6 mice. In addition, oxotremorine did not affect locomotor activity in BTBR mice, but significantly reduced locomotor activity in B6 mice at the 0.01 mg dose. These findings demonstrate that activation of mAChRs reduces repetitive behavior in the BTBR mouse and suggest that treatment with a mAChR agonist may be effective in reducing repetitive behaviors in ASD.

Effect of Mg on the Microstructure and Corrosion Resistance of the Continuously Hot-Dip Galvanizing Zn-Mg Coating

Directory of Open Access Journals (Sweden)

Anping Dong

2017-08-01

Full Text Available The microstructure of continuously hot-dip galvanizing Zn-Mg coating was investigated in order to obtain the mechanism of the effects of Mg on the corrosion resistance. In this paper, the vertical section of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner was calculated. The results indicates that the phase composition of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner is the same as Zn-Mg binary phase diagram, suggesting Al in the Zn-Mg (ZM coatings mainly concentrates on the interfacial layer between the coating and steel substrate. The microstructure of continuously hot-dip galvanizing ZM coatings with 0.20 wt % Al containing 1.0–3.0 wt % Mg was investigated using tunneling electron microscopy (TEM. The morphology of Zn in the coating changes from bulk to strip and finally to mesh-like, and the MgZn2 changes from rod-like to mesh-like with the Mg content increasing. Al in the ZM coatings mainly segregates at the Fe2Al5 inhibition layer and the Mg added to the Zn bath makes this inhibition layer thinner and uneven. Compared to GI coating, the time of the first red rust appears increases by more than two-fold and expansion rate of red rust reduces by more than four-fold in terms of salt spray experiment. The ZM coating containing 2.0 wt % Mg has the best corrosion resistance. The enhanced corrosion resistance of ZM coatings mainly depends on different corrosion products.

Proteome of Salmonella enterica serotype Tyhimurium Grown in Low Mg2+/pH Medium

Energy Technology Data Exchange (ETDEWEB)

Shi, Liang; Ansong, Charles; Smallwood, Heather S.; Rommereim, Leah M.; McDermott, Jason E.; Brewer, Heather M.; Norbeck, Angela D.; Taylor, Ronald C.; Gustin, Jean K.; Heffron, Fred; Smith, Richard D.; Adkins, Joshua N.

2009-09-04

To determine the impact of a low Mg2+/pH defined growth medium (MgM) on the proteome of Salmonella enterica serotype Typhimurium, we cultured S. Typhimurium cells in the medium under two different conditions termed MgM Shock and MgM Dilution and then comparatively analyzed the bacterial cells harvested from these conditions by a global proteomic approach. Proteomic results showed that MgM Shock and MgM Dilution differentially affected the S. Typhimurium proteome. MgM Shock induced a group of proteins whose induction usually occurred at low O2 level, while MgM Dilution induced those related to the type III secretion system (T3SS) of Salmonella Pathogenicity Island 2 (SPI2) and those involved in thiamine or biotin biosynthesis. The metabolic state of the S. Typhimurium cells grown under MgM Shock condition also differed significantly from that under MgM Dilution condition. Western blot analysis not only confirmed the proteomic results, but also showed that the abundances of SPI2-T3SS proteins SsaQ and SseE and biotin biosynthesis proteins BioB and BioD increased after S. Typhimurium infection of RAW 264.7 macrophages. Deletion of the gene encoding BioB reduced the bacterial ability to replicate inside the macrophages, suggesting a biotin-limited environment encountered by S. Typhimurium within RAW 264.7 macrophages.

Single-bilayer graphene oxide sheet tolerance and glutathione redox system significance assessment in faba bean (Vicia faba L.)

International Nuclear Information System (INIS)

Anjum, Naser A.; Singh, Neetu; Singh, Manoj K.; Shah, Zahoor A.; Duarte, Armando C.; Pereira, Eduarda; Ahmad, Iqbal

2013-01-01

Adsorbents based on single-bilayer graphene oxide sheet (hereafter termed “graphene oxide”) are widely used in contaminated environments cleanup which may easily open the avenues for their entry to different environmental compartments, exposure to organisms and their subsequent transfer to human/animal food chain. Considering a common food crop—faba bean (Vicia faba L.) germinating seedlings as a model plant system, this study assesses the V. faba-tolerance to different concentrations (0, 100, 200, 400, 800, and 1600 mg L −1 ) of graphene oxide (0.5–5 μm) and evaluates glutathione (γ-glutamyl-cysteinyl-glycine) redox system significance in this context. The results showed significantly increased V. faba sensitivity under three graphene oxide concentrations (in order of impact: 1,600 > 200 > 100 mg graphene oxide L −1 ), which was accompanied by decreased glutathione redox (reduced glutathione-to-oxidized glutathione) ratio, reduced glutathione pool, as well as significant and equally elevated activities of glutathione-regenerating (glutathione reductase) and glutathione-metabolizing (glutathione peroxidase; glutathione sulfo-transferase) enzymes. Contrarily, the two graphene oxide concentrations (in order of impact: 800 > 400 graphene oxide mg L −1 ) yielded promising results; where, significant improvements in V. faba health status (measured as increased graphene oxide tolerance) were clearly perceptible with increased ratio of the reduced glutathione-to-oxidized glutathione, reduced glutathione pool and glutathione reductase activity but decreased activities of glutathione-metabolizing enzymes. It is inferred that V. faba seedlings-sensitivity and/or tolerance to graphene oxide concentrations depends on both the cellular redox state (reduced glutathione-to-oxidized glutathione ratio) and the reduced glutathione pool which in turn are controlled by a finely tuned modulation of the coordination between glutathione-regenerating and glutathione

Single-bilayer graphene oxide sheet tolerance and glutathione redox system significance assessment in faba bean (Vicia faba L.)

Energy Technology Data Exchange (ETDEWEB)

Anjum, Naser A. [University of Aveiro, Centre for Environmental and Marine Studies (CESAM) and Department of Chemistry (Portugal); Singh, Neetu; Singh, Manoj K. [University of Aveiro, Center for Mechanical Technology and Automation (TEMA) and Department of Mechanical Engineering (Portugal); Shah, Zahoor A. [University of Toledo, Department of Medicinal and Biological Chemistry, College of Pharmacy and Pharmaceutical Sciences (United States); Duarte, Armando C.; Pereira, Eduarda; Ahmad, Iqbal, E-mail: ahmadr@ua.pt [University of Aveiro, Centre for Environmental and Marine Studies (CESAM) and Department of Chemistry (Portugal)

2013-07-15

Adsorbents based on single-bilayer graphene oxide sheet (hereafter termed 'graphene oxide') are widely used in contaminated environments cleanup which may easily open the avenues for their entry to different environmental compartments, exposure to organisms and their subsequent transfer to human/animal food chain. Considering a common food crop-faba bean (Vicia faba L.) germinating seedlings as a model plant system, this study assesses the V. faba-tolerance to different concentrations (0, 100, 200, 400, 800, and 1600 mg L{sup -1}) of graphene oxide (0.5-5 {mu}m) and evaluates glutathione ({gamma}-glutamyl-cysteinyl-glycine) redox system significance in this context. The results showed significantly increased V. faba sensitivity under three graphene oxide concentrations (in order of impact: 1,600 > 200 > 100 mg graphene oxide L{sup -1}), which was accompanied by decreased glutathione redox (reduced glutathione-to-oxidized glutathione) ratio, reduced glutathione pool, as well as significant and equally elevated activities of glutathione-regenerating (glutathione reductase) and glutathione-metabolizing (glutathione peroxidase; glutathione sulfo-transferase) enzymes. Contrarily, the two graphene oxide concentrations (in order of impact: 800 > 400 graphene oxide mg L{sup -1}) yielded promising results; where, significant improvements in V. faba health status (measured as increased graphene oxide tolerance) were clearly perceptible with increased ratio of the reduced glutathione-to-oxidized glutathione, reduced glutathione pool and glutathione reductase activity but decreased activities of glutathione-metabolizing enzymes. It is inferred that V. faba seedlings-sensitivity and/or tolerance to graphene oxide concentrations depends on both the cellular redox state (reduced glutathione-to-oxidized glutathione ratio) and the reduced glutathione pool which in turn are controlled by a finely tuned modulation of the coordination between glutathione-regenerating and

Increased iron level in phytase-supplemented diets reduces performance and nutrient utilisation in broiler chickens.

Science.gov (United States)

Akter, Marjina; Iji, P A; Graham, H

2017-08-01

1. The effect of different levels of dietary iron on phytase activity and its subsequent effect on broiler performance were investigated in a 3 × 2 factorial arrangement. A total of 360 day-old Ross 308 male broiler chicks were distributed to 6 experimental diets, formulated with three levels of Fe (60, 80 and 100 mg/kg) and two levels of phytase (0 and 500 FTU/kg). 2. Phytase supplemented to mid-Fe diets increased feed consumption more than the non-supplemented diet at d 24. From hatch to d 35, Fe × phytase interaction significantly influenced the feed intake (FI), body weight gain (BWG) and feed conversion ratio (FCR). The high-Fe diet supplemented with phytase significantly reduced FI and BWG of broilers than those supplemented with low- or mid-Fe diets. The overall FCR was significantly better in birds fed on the mid-Fe diets with phytase supplementation. 3. A significant improvement in ileal digestibility of N, P, Mg and Fe was observed in birds feed diets containing 60 mg Fe/kg, with significant interaction between Fe and phytase. 4. Phytase improved the bone breaking strength when supplemented to low- or mid-Fe diets, compared to the non-supplemented diets. There was a significant Fe × phytase interaction effect. Tibia Fe content was higher in birds fed on phytase-free diets with high Fe but the reverse was the case when phytase was added and their interaction was significant. High dietary Fe significantly increased the accumulation of Fe in liver. 5. Phytase improved Ca-Mg-ATPase, Ca-ATPase and Mg-ATPase activities in jejunum when supplemented to the diet containing 80 mg Fe/kg. 6. This study indicates that high (100 mg/kg) dietary Fe inhibited phytase efficacy and subsequently reduced the overall performance and nutrient utilisation of broilers.

Suppression of the internal electric field effects in ZnO/Zn0.7Mg0.3O quantum wells by ion-implantation induced intermixing

International Nuclear Information System (INIS)

Davis, J A; Dao, L V; Wen, X; Ticknor, C; Hannaford, P; Coleman, V A; Tan, H H; Jagadish, C; Koike, K; Sasa, S; Inoue, M; Yano, M

2008-01-01

Strong suppression of the effects caused by the internal electric field in ZnO/ZnMgO quantum wells following ion-implantation and rapid thermal annealing, is revealed by photoluminescence, time-resolved photoluminescence, and band structure calculations. The implantation and annealing induces Zn/Mg intermixing, resulting in graded quantum well interfaces. This reduces the quantum-confined Stark shift and increases electron-hole wavefunction overlap, which significantly reduces the exciton lifetime and increases the oscillator strength

Converting hcp Mg-Al-Zn alloy into bcc Mg-Li-Al-Zn alloy by electrolytic deposition and diffusion of reduced lithium atoms in a molten salt electrolyte LiCl-KCl

International Nuclear Information System (INIS)

Lin, M.C.; Tsai, C.Y.; Uan, J.Y.

2007-01-01

A body-centered cubic (bcc) Mg-12Li-9Al-1Zn (wt.%) alloy was fabricated in air by electrolysis from LiCl-KCl molten salt at 500 deg. C. Electrolytic deposition of Li atoms on cathode (Mg-Al-Zn alloy) and diffusion of the Li atoms formed the bcc Mg-Li-Al-Zn alloy with 12 wt.% Li and only 0.264 wt.% K. Low K concentration in the bcc Mg alloy strip after the electrolysis process resulted from 47% atomic size misfit between K and Mg atoms and low solubility of K in Mg matrix

Low-power, high-uniform, and forming-free resistive memory based on Mg-deficient amorphous MgO film with rough surface

Science.gov (United States)

Guo, Jiajun; Ren, Shuxia; Wu, Liqian; Kang, Xin; Chen, Wei; Zhao, Xu

2018-03-01

Saving energy and reducing operation parameter fluctuations remain crucial for enabling resistive random access memory (RRAM) to emerge as a universal memory. In this work, we report a resistive memory device based on an amorphous MgO (a-MgO) film that not only exhibits ultralow programming voltage (just 0.22 V) and low power consumption (less than 176.7 μW) but also shows excellent operative uniformity (the coefficient of variation is only 1.7% and 2.2% for SET and RESET voltage, respectively). Moreover, it also shows a forming-free characteristic. Further analysis indicates that these distinctive properties can be attributed to the unstable local structures and the rough surface of the Mg-deficient a-MgO film. These findings show the potential of using a-MgO in high-performance nonvolatile memory applications.

Lubrication performance and mechanisms of Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxide nanoparticles as lubricant additives

International Nuclear Information System (INIS)

Li, Shuo; Bhushan, Bharat

2016-01-01

Highlights: • Mg/Al-, Zn/Al- and Zn/Mg/Al-layered double hydroxide were synthesized. • Mg/Al-LDH had superior tribological performance compared to other LDHs. • The best thermal stability of Mg/Al-LDH was responsible for its friction property. - Abstract: Solid lubricant particles are commonly used as oil additives for low friction and wear. Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxides (LDH) were synthesized by coprecipitation method. The benefits of LDH nanoparticles are that they can be synthesized using chemical methods where size and shape can be controlled, and can be modified organically to allow dispersal in fluids. The LDH nanoparticles were characterized by X-ray diffraction, scanning electron microscope, thermogravimetry, and differential scanning calorimetry. A pin-on-disk friction and wear tester was used for evaluating the friction and wear properties of LDH nanoparticles as lubricant additives. LDH nanoparticles have friction-reducing and anti-wear properties compared to oil without LDHs. Mg/Al-LDH has the best lubrication, possibly due to better thermal stability in severe conditions.

Lubrication performance and mechanisms of Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxide nanoparticles as lubricant additives

Energy Technology Data Exchange (ETDEWEB)

Li, Shuo [School of Materials Science and Technology, China University of Geosciences (Beijing), 29 Xueyuan Road, Haidian Distract, Beijing 100083 (China); Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics (NLBB), The Ohio State University, 201 W. 19th Avenue Columbus, OH 43210-1142 (United States); Bhushan, Bharat, E-mail: bhushan.2@osu.edu [Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics (NLBB), The Ohio State University, 201 W. 19th Avenue Columbus, OH 43210-1142 (United States)

2016-08-15

Highlights: • Mg/Al-, Zn/Al- and Zn/Mg/Al-layered double hydroxide were synthesized. • Mg/Al-LDH had superior tribological performance compared to other LDHs. • The best thermal stability of Mg/Al-LDH was responsible for its friction property. - Abstract: Solid lubricant particles are commonly used as oil additives for low friction and wear. Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxides (LDH) were synthesized by coprecipitation method. The benefits of LDH nanoparticles are that they can be synthesized using chemical methods where size and shape can be controlled, and can be modified organically to allow dispersal in fluids. The LDH nanoparticles were characterized by X-ray diffraction, scanning electron microscope, thermogravimetry, and differential scanning calorimetry. A pin-on-disk friction and wear tester was used for evaluating the friction and wear properties of LDH nanoparticles as lubricant additives. LDH nanoparticles have friction-reducing and anti-wear properties compared to oil without LDHs. Mg/Al-LDH has the best lubrication, possibly due to better thermal stability in severe conditions.

Mechanical property, biocorrosion and in vitro biocompatibility evaluations of Mg-Li-(Al)-(RE) alloys for future cardiovascular stent application.

Science.gov (United States)

Zhou, W R; Zheng, Y F; Leeflang, M A; Zhou, J

2013-11-01

Mg-Li-based alloys were investigated for future cardiovascular stent application as they possess excellent ductility. However, Mg-Li binary alloys exhibited reduced mechanical strengths due to the presence of lithium. To improve the mechanical strengths of Mg-Li binary alloys, aluminum and rare earth (RE) elements were added to form Mg-Li-Al ternary and Mg-Li-Al-RE quarternary alloys. In the present study, six Mg-Li-(Al)-(RE) alloys were fabricated. Their microstructures, mechanical properties and biocorrosion behavior were evaluated by using optical microscopy, X-ray diffraction, scanning electronic microscopy, tensile tests, immersion tests and electrochemical measurements. Microstructure characterization indicated that grain sizes were moderately refined by the addition of rare earth elements. Tensile testing showed that enhanced mechanical strengths were obtained, while electrochemical and immersion tests showed reduced corrosion resistance caused by intermetallic compounds distributed throughout the magnesium matrix in the rare-earth-containing Mg-Li alloys. Cytotoxicity assays, hemolysis tests as well as platelet adhesion tests were performed to evaluate in vitro biocompatibilities of the Mg-Li-based alloys. The results of cytotoxicity assays clearly showed that the Mg-3.5Li-2Al-2RE, Mg-3.5Li-4Al-2RE and Mg-8.5Li-2Al-2RE alloys suppressed vascular smooth muscle cell proliferation after 5day incubation, while the Mg-3.5Li, Mg-8.5Li and Mg-8.5Li-1Al alloys were proven to be tolerated. In the case of human umbilical vein endothelial cells, the Mg-Li-based alloys showed no significantly reduced cell viabilities except for the Mg-8.5Li-2Al-2RE alloy, with no obvious differences in cell viability between different culture periods. With the exception of Mg-8.5Li-2Al-2RE, all of the other Mg-Li-(Al)-(RE) alloys exhibited acceptable hemolysis ratios, and no sign of thrombogenicity was found. These in vitro experimental results indicate the potential of Mg

Casting defects and mechanical properties of high pressure die cast Mg-Zn-Al-RE alloys

Energy Technology Data Exchange (ETDEWEB)

Xiao, Wenlong; Easton, Mark A.; Zhu, Suming; Nie, Jianfeng [CAST Cooperative Research Centre, Department of Materials Engineering Monash University, Melbourne, VIC (Australia); Dargusch, Matthew S. [School of Mechanical and Mining Engineering, University of Queensland, Brisbane, QLD (Australia); Gibson, Mark A. [CSIRO Process Science and Engineering, Melbourne, VIC (Australia); Jia, Shusheng [Key Laboratory of Automobile Materials, Ministry of Education, Department of Materials Science and Engineering Jilin University, Changchun (China)

2012-02-15

The die casting defects and tensile properties of high pressure die cast (HPDC) Mg-Zn-Al-RE alloys with various combinations of Zn and Al were studied. The results show that die casting defects in Mg-Zn-Al-RE alloys are affected by the percentage of Zn and Al contents. The hot tearing susceptibility (HTS) of Mg-Zn-Al-RE alloys tends to increase with increasing Zn content up to 6 wt%, while a further increase of Al and/or Zn content reduces the HTS. In tensile tests, the yield strength (YS) is generally improved by increasing Zn or Al content, whereas the tensile strength (TS) and ductility appear to depend largely on the presence of casting defects. Compared with Mg-Zn-Al alloys, the mechanical properties of the Mg-Zn-Al-RE alloy are significantly improved. The Mg-4Zn-4Al-4RE alloy is found to have few casting defects and the optimal tensile properties. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

MgO nanoparticles as antibacterial agent: preparation and activity

Energy Technology Data Exchange (ETDEWEB)

Tang, Zhen-Xing, E-mail: tangzhenxing@126.com [Department of Food Science, Anqing, Vocational and Technical College, Anqing, Anhui (China); Lv, Bin-Feng [Date Palm Research Center, King Faisal University, (Saudi Arabia)

2014-07-15

Bacterial pollution is a great risk for human health. Nanotechnology offers a way to develop new inorganic antibacterial agents. Nano-inorganic metal oxide has a potential to reduce bacterial contamination. MgO is an important inorganic oxide and has been widely used in many fields. Many studies have shown that MgO nanoparticles have good antibacterial activity. Therefore, in this paper, the main synthesis methods, antibacterial activity and antibacterial mechanisms of MgO nanoparticles are reviewed. (author)

MgO nanoparticles as antibacterial agent: preparation and activity

International Nuclear Information System (INIS)

Tang, Zhen-Xing; Lv, Bin-Feng

2014-01-01

Bacterial pollution is a great risk for human health. Nanotechnology offers a way to develop new inorganic antibacterial agents. Nano-inorganic metal oxide has a potential to reduce bacterial contamination. MgO is an important inorganic oxide and has been widely used in many fields. Many studies have shown that MgO nanoparticles have good antibacterial activity. Therefore, in this paper, the main synthesis methods, antibacterial activity and antibacterial mechanisms of MgO nanoparticles are reviewed. (author)

Corrosion analysis of AlMg2 and AlMgSi using electrochemical method

International Nuclear Information System (INIS)

Dian A; Maman Kartaman; Rosika K; Yanlinastuti

2014-01-01

Corrosion test of cladding materials and structures of research reactor fuel, AlMgSi and AlMg2 have been performed in demineralized water of pH 2 and 6.7 using an electrochemical method. Corrosion phenomenon is affected by several factor such as composition and condition of solution. The purpose of this activity is to investigate the corrosion phenomena through the determination of the parameters of corrosion and polarization curve. The materials used are AlMg2 and AlMgSi alloy in circular dish shape with an area of 1 Cm"2. Preparation of the test sample is performed through several stages polishing, cleaning and drying procedures followed ASTM G3. The electrochemical method is done by measuring the open circuit potential (OCP), polarization resistance and potentiodynamic in demineralized water of pH 2 and pH 6.7 at temperature of 25°C. The results of the OCP is the corrosion potential (Ecorr) of AlMg2 and AlMgSi each of -906.1 mV and -619.8 mV at pH 2 and -868.6 and -756.7 mV at pH 6.7 mV. The results of measurements by polarization resistance technique showed that the corrosion rate of AlMg2 and AlMgSi in safe category (<2 mpy) at pH 6.7 and at pH 2 corrosion rate increased significantly, but still in the lightweight category (<20 mpy). Potentiodynamic curves showed that the passivation at pH 6.7 is very low while the passivation at pH 2 occurs within a relatively short range potential and followed events corroded. (author)

Enhancing Friction Stir Weldability of 6061-T6 Al and AZ31B Mg Alloys Assisted by External Non-rotational Shoulder

Science.gov (United States)

Ji, Shude; Huang, Ruofei; Meng, Xiangchen; Zhang, Liguo; Huang, Yongxian

2017-05-01

In order to increase cooling rate and then reduce the amounts of intermetallic compounds, external non-rotational shoulder tool system derived from traditional tool in friction stir welding was used to join dissimilar Al and Mg alloys. In this study, based on the external non-rotational shoulder, the weldability of Al and Mg alloys was significantly improved. The non-rotational shoulder tool is propitious to make more materials into weld, increase cooling rate and then reduce material adhesion of rotational pin, obtaining sound joint with smaller flashes and smooth surface. Importantly, the thickness of intermetallic compounds layer is reduced compared with traditional tool. Meanwhile, hardness values of dissimilar joint present uneven distribution, resulting from complex intercalated structures in nugget zone (NZ) featured by intermetallic compound layers and fine recrystallized Mg and Al grains. Compared with traditional tool, non-rotational shoulder is beneficial to higher tensile properties of joint. Due to the intermetallic compound layer formed in the interface of Al-Mg, the welding joint easily fractures at the NZ, presenting the typical brittle fracture mode.

HALF-DOSE DEPOT TRIPTORELIN COMPARABLE TO REDUCED DAILY BUSERELIN: A RANDOMIZED CLINICAL TRIAL

Directory of Open Access Journals (Sweden)

L. Safdarian

2007-09-01

Full Text Available Pituitary suppression by depot GnRH agonist may be excessive for ovarian stimulation. This study compares the efficacy of a single half-dose depot triptorelin and reduced-dose daily buserelin in a long protocol ICSI/ET. METHODS: A total of 182 patients were randomized into two groups using sealed envelopes. Pituitary desensitization was obtained in group 1 (91 patients with half-dose (1.87 mg depot triptorelin in the mid-luteal phase of their menstrual cycle, and in group 2 (91 patients with standard daily dose (0.5 mg buserelin, which was then reduced to 0.25 mg at the start of human menopausal gonadotropin (HMG stimulation. RESULTS: No significant differences were found among those who received HCG in terms of clinical pregnancy rate (34.4% in both groups, implantation rate (14.8% in group 1 versus 11.1% in group 2, fertilization rate (93.3 versus 95.6%, poor response rate (11.1 versus 6.7%, and miscarriage rate (11.1 versus 7.8%. No significant differences were seen in number of HMG ampoules used, follicles at HCG administration, and oocytes retrieved. The number of days of stimulation was significantly reduced in group 2 (11.2 +/- 1.8 in group 1 versus 10.6 +/- 1.9, p = 0.030. CONCLUSION: A half-dose of depot triptorelin can be successfully used in ovarian stimulation instead of reduced-dose daily buserelin, with more patient comfort and reduced stress and cost of injections.

Oxytocin reduces alcohol consumption in prairie voles.

Science.gov (United States)

Stevenson, J R; Wenner, S M; Freestone, D M; Romaine, C C; Parian, M C; Christian, S M; Bohidar, A E; Ndem, J R; Vogel, I R; O'Kane, C M

2017-10-01

Alcohol use disorder (AUD) negatively affects millions of people every year in the United States, and effective treatments for AUD are still needed. The neuropeptide oxytocin has shown promise for reducing alcohol drinking in mice and rats. Because oxytocin also plays a key role in complex prosocial behaviors like bonding and attachment, we tested the effect of oxytocin on alcohol drinking in prairie voles, a species that both consumes high amounts of alcohol and forms oxytocin dependent social bonds in a manner similar to humans. Oxytocin treatment (1.0, 3.0, and 10.0mg/kg, i.p.) reduced alcohol consumption in male and female prairie voles in animals that had access to 15% ethanol vs water every other day for 12 alcohol drinking sessions. In animals with continuous access to 15% alcohol and water, oxytocin (3.0mg/kg) reduced alcohol consumption only in the first hour of access after treatment, with no significant effects on consumption over the 24-hr period. In an open field locomotor test, oxytocin (1.0, 3.0, and 10.0mg/kg, i.p.) did not affect overall locomotor activity; however, ethanol (2g/kg, i.p.) increased locomotor activity in males and females, and produced anxiolytic effects (increased time in the center of an open field) in females only. Because prairie voles have been shown to match the alcohol consumption of their cage mate, we evaluated the relationship between cage mates' alcohol drinking. There was an overall pattern of social facilitation (consumption by one cage mate predicted consumption by the other cage mate); however, we found significant individual differences across cages in which many cages did not show significant matching, and, in some cases one cage mate's consumption negatively predicted the other cage mate's consumption. Overall, our data provide support for the potential of oxytocin as a treatment to reduce alcohol consumption. Copyright © 2017 Elsevier Inc. All rights reserved.

Lubrication of dislocation glide in MgO by hydrous defects

Science.gov (United States)

Skelton, Richard; Walker, Andrew M.

2018-02-01

Water-related defects, principally in the form of protonated cation vacancies, are potentially able to weaken minerals under high-stress or low-temperature conditions by reducing the Peierls stress required to initiate dislocation glide. In this study, we use the Peierls-Nabarro (PN) model to determine the effect of protonated Mg vacancies on the 1/2{110} and 1/2{100} slip systems in MgO. This PN model is parameterized using generalized stacking fault energies calculated using plane-wave density functional theory, with and without protonated Mg vacancies present at the glide plane. It found that these defects increase dislocation core widths and reduce the Peierls stress over the entire pressure range 0-125 GPa. Furthermore, 1/2{110} slip is found to be more sensitive to the presence of protonated vacancies which increases in the pressure at which {100} becomes the easy glide plane for 1/2 screw dislocations. These results demonstrate, for a simple mineral system, that water-related defects can alter the deformation behavior of minerals in the glide-creep regime by reducing the stress required to move dislocations by glide. (Mg, Fe)O is the most anisotropic mineral in the Earth's lower mantle, so the differential sensitivity of the major slip systems in MgO to hydrous defects has potential implications for the interpretation of the seismic anisotropy in this region.

Temperature dependence of the interfacial magnetic anisotropy in W/CoFeB/MgO

Directory of Open Access Journals (Sweden)

Kyoung-Min Lee

2017-06-01

Full Text Available The interfacial perpendicular magnetic anisotropy in W/CoFeB (1.2 ∼ 3 nm/MgO thin film structures is strongly dependent on temperature, and is significantly reduced at high temperature. The interfacial magnetic anisotropy is generally proportional to the third power of magnetization, but an additional factor due to thermal expansion is required to explain the temperature dependence of the magnetic anisotropy of ultrathin CoFeB films. The reduction of the magnetic anisotropy is more prominent for the thinner films; as the temperature increases from 300 K to 400 K, the anisotropy is reduced ∼50% for the 1.2-nm-thick CoFeB, whereas the anisotropy is reduced ∼30% for the 1.7-nm-thick CoFeB. Such a substantial reduction of magnetic anisotropy at high temperature is problematic for data retention when incorporating W/CoFeB/MgO thin film structures into magneto-resistive random access memory devices. Alternative magnetic materials and structures are required to maintain large magnetic anisotropy at elevated temperatures.

A chimpanzee recognizes synthetic speech with significantly reduced acoustic cues to phonetic content.

Science.gov (United States)

Heimbauer, Lisa A; Beran, Michael J; Owren, Michael J

2011-07-26

A long-standing debate concerns whether humans are specialized for speech perception, which some researchers argue is demonstrated by the ability to understand synthetic speech with significantly reduced acoustic cues to phonetic content. We tested a chimpanzee (Pan troglodytes) that recognizes 128 spoken words, asking whether she could understand such speech. Three experiments presented 48 individual words, with the animal selecting a corresponding visuographic symbol from among four alternatives. Experiment 1 tested spectrally reduced, noise-vocoded (NV) synthesis, originally developed to simulate input received by human cochlear-implant users. Experiment 2 tested "impossibly unspeechlike" sine-wave (SW) synthesis, which reduces speech to just three moving tones. Although receiving only intermittent and noncontingent reward, the chimpanzee performed well above chance level, including when hearing synthetic versions for the first time. Recognition of SW words was least accurate but improved in experiment 3 when natural words in the same session were rewarded. The chimpanzee was more accurate with NV than SW versions, as were 32 human participants hearing these items. The chimpanzee's ability to spontaneously recognize acoustically reduced synthetic words suggests that experience rather than specialization is critical for speech-perception capabilities that some have suggested are uniquely human. Copyright © 2011 Elsevier Ltd. All rights reserved.

Preparation and characterization of Ti-doped MgO nanopowders by a modified coprecipitation method

International Nuclear Information System (INIS)

Wang Wei; Qiao Xueliang; Chen Jianguo; Tan Fatang

2008-01-01

Ti-doped MgO nanopowders were prepared via a chemical coprecipitation method using acetic acid as a modifier in the presence of the surfactant polyethylene glycol (PEG 400). The as-obtained products were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), differential thermal analysis (DTA) and transmission electron microscopy (TEM). The results show that titanium atoms have been successfully incorporated into the crystal lattice of MgO with periclase structure. The modifier, acetic acid, can significantly reduce the particle size, and improve size distribution and dispersion of nanoparticles. In addition, the effect of doped titanium on the structure and morphology of magnesium oxide was also investigated

Mg-MOF-74/MgF₂ Composite Coating for Improving the Properties of Magnesium Alloy Implants: Hydrophilicity and Corrosion Resistance.

Science.gov (United States)

Liu, Wei; Yan, Zhijie; Ma, Xiaolu; Geng, Tie; Wu, Haihong; Li, Zhongyue

2018-03-07

Surface modification on Mg alloys is highly promising for their application in the field of bone repair. In this study, a new metal-organic framework/MgF₂ (Mg-MOF-74/MgF₂) composite coating was prepared on the surface of AZ31B Mg alloy via pre-treatment of hydrofluoric acid and in situ hydrothermal synthesis methods. The surface topography of the composite coating is compact and homogeneous, and Mg-MOF-74 has good crystallinity. The corrosion resistance of this composite coating was investigated through Tafel polarization test and immersion test in simulated body fluid at 37 °C. It was found that Mg-MOF-74/MgF₂ composite coating significantly slowed down the corrosion rate of Mg alloy. Additionally, Mg-MOF-74/MgF₂ composite coating expresses super-hydrophilicity with the water contact angle of nearly 0°. In conclusion, on the basis of MgF₂ anticorrosive coating, the introduction of Mg-MOF-74 further improves the biological property of Mg alloys. At last, we propose that the hydrophilicity of the composite coating is mainly owing to the large number of hydroxyl groups, the high specific surface area of Mg-MOF-74, and the rough coating produced by Mg-MOF-74 particles. Hence, Mg-MOF-74 has a great advantage in enhancing the hydrophilicity of Mg alloy surface.

Superior critical current density obtained in MgB{sub 2} bulks via employing carbon-coated boron and minor Cu addition

Energy Technology Data Exchange (ETDEWEB)

Peng, Junming; Liu, Yongchang [State Key Laboratory of Hydraulic Engineering Simulation and Safety, School of Materials Science & Engineering, Tianjin University, Tianjin 300072 (China); Ma, Zongqing, E-mail: mzq0320@163.com [State Key Laboratory of Hydraulic Engineering Simulation and Safety, School of Materials Science & Engineering, Tianjin University, Tianjin 300072 (China); Institute for Superconducting and Electronic Materials, AIIM, University of Wollongong, Squires Way, North Wollongong, NSW 2500 (Australia); Shahriar Al Hossain, M. [Institute for Superconducting and Electronic Materials, AIIM, University of Wollongong, Squires Way, North Wollongong, NSW 2500 (Australia); Xin, Ying; Jin, Jianxun [Tianjin University – Futong Group Research Center of Applied Superconductivity, Tianjin University, Tianjin 300072 (China)

2016-09-15

Highlights: • Usage of carbon-coated boron leads to high level of homogeneous carbon doping. • Cu addition improves MgB{sub 2} grain connectivity, leading to higher J{sub c} at low fields. • Cu addition reduces MgO impurity, also contributing to the improvement of J{sub c}. - Abstract: High performance Cu doped MgB{sub 2} bulks were prepared by an in-situ method with carbon-coated amorphous boron as precursor. It was found that the usage of carbon-coated boron in present work leads to the formation of uniformly refined MgB{sub 2} grains, as well as a high level of homogeneous carbon doping in the MgB{sub 2} samples, which significantly enhance the J{sub c} in both Cu doped and undoped bulks compared to MgB{sub 2} bulks with normal amorphous boron precursor. Moreover, minor Cu can service as activator, and thus facilitates the growth of MgB{sub 2} grains and improves crystallinity and grain connectivity, which can bring about the excellent critical current density (J{sub c}) at self fields and low fields (the best values are 7 × 10{sup 5} A/cm{sup 2} at self fields, and 1 × 10{sup 5} A/cm{sup 2} at 2 T, 20 K, respectively). Simultaneously, minor Cu addition can reduce the amount of MgO impurity significantly, also contributing to the improvement of J{sub c} at low fields. Our work suggests that Cu-activated sintering combined with employment of carbon-coated amorphous boron as precursor could be a promising technique to produce practical MgB{sub 2} bulks or wires with excellent J{sub c} on an industrial scale.

Intensity-modulated radiotherapy significantly reduces xerostomia compared with conventional radiotherapy

International Nuclear Information System (INIS)

Braam, Petra M.; Terhaard, Chris H.J. M.D.; Roesink, Judith M.; Raaijmakers, Cornelis P.J.

2006-01-01

Purpose: Xerostomia is a severe complication after radiotherapy for oropharyngeal cancer, as the salivary glands are in close proximity with the primary tumor. Intensity-modulated radiotherapy (IMRT) offers theoretical advantages for normal tissue sparing. A Phase II study was conducted to determine the value of IMRT for salivary output preservation compared with conventional radiotherapy (CRT). Methods and Materials: A total of 56 patients with oropharyngeal cancer were prospectively evaluated. Of these, 30 patients were treated with IMRT and 26 with CRT. Stimulated parotid salivary flow was measured before, 6 weeks, and 6 months after treatment. A complication was defined as a stimulated parotid flow rate <25% of the preradiotherapy flow rate. Results: The mean dose to the parotid glands was 48.1 Gy (SD 14 Gy) for CRT and 33.7 Gy (SD 10 Gy) for IMRT (p < 0.005). The mean parotid flow ratio 6 weeks and 6 months after treatment was respectively 41% and 64% for IMRT and respectively 11% and 18% for CRT. As a result, 6 weeks after treatment, the number of parotid flow complications was significantly lower after IMRT (55%) than after CRT (87%) (p = 0.002). The number of complications 6 months after treatment was 56% for IMRT and 81% for CRT (p = 0.04). Conclusions: IMRT significantly reduces the number of parotid flow complications for patients with oropharyngeal cancer

The structural, electrical and optical properties of Mg-doped ZnO with different interstitial Mg concentration

Energy Technology Data Exchange (ETDEWEB)

Hu, Yonghong, E-mail: hchyh@njust.edu.cn [School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100 (China); Institute of Optoelectronics & Nanomaterials, College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China); Zeng, Haibo [Institute of Optoelectronics & Nanomaterials, College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China); Du, Jifu [School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100 (China); Hu, Ziyu [Beijing Computational Science Research Center, Beijing 100084 (China); Zhang, Shengli [Institute of Optoelectronics & Nanomaterials, College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China)

2016-10-01

Through first principle calculations, we studied the structural, electronic and optical properties of ZnO doped by interstitial Mg. With the increase of Mg content (x), the derivations of lattice parameters from the wurtzite ZnO become more and more significant. The Mg-doped ZnO with x below 15.79% is found to be n-type semiconductor. The minimum of energy band gap and light transmittance in high energy region (7.5–25 eV) decrease while the conductivity and refractive index increase with increasing x. Further increasing x up to 20%, the Mg-doped ZnO is found to be direct-band-gap semiconductor with great structural derivation from wurtzite phase. The light transmittance increases while the refractive index decreases with the increase of x due to the change of geometry and electronic structure. So, it’s concluded that the electronic and optical properties of ZnO doped by interstitial Mg may be greatly influenced by Mg content. - Graphical abstract: The minimum of energy gap decreases while the corresponding relative number of electrons into the conduction bands increases when the interstitial Mg content x in Mg-doped ZnO increases (0 ≤ x ≤ 15.79%). - Highlights: • The energy band gap decreases with the increase of interstitial Mg content from 5.88% to 15.79%. • The conductivity increases with the increase of interstitial Mg content from 5.88% to 15.79%. • The Mg{sub x}Zn{sub 1-x}O (interstitial Mg content x= 20%) is found to be a direct-band-gap semiconductor. • The light transmittance decreases with the increase of interstitial Mg content from 5.88% to 15.79%. • The refractive index increases with the increase of interstitial Mg content from 5.88% to 15.79%.

Sida cordifolia leaf extract reduces the orofacial nociceptive response in mice.

Science.gov (United States)

Bonjardim, L R; Silva, A M; Oliveira, M G B; Guimarães, A G; Antoniolli, A R; Santana, M F; Serafini, M R; Santos, R C; Araújo, A A S; Estevam, C S; Santos, M R V; Lyra, A; Carvalho, R; Quintans-Júnior, L J; Azevedo, E G; Botelho, M A

2011-08-01

In this study, we describe the antinociceptive activity of the ethanol extract (EE), chloroform (CF) and methanol (MF) fractions obtained from Sida cordifolia, popularly known in Brazil as "malva branca" or "malva branca sedosa". Leaves of S. cordifolia were used to produce the crude ethanol extract and after CF and MF. Experiments were conducted on Swiss mice using the glutamate and formalin-induced orofacial nociception. In the formalin test, all doses of EE, CF and MF significantly reduced the orofacial nociception in the first (p < 0.001) and second phase (p < 0.001), which was also naloxone-sensitive. In the glutamate-induced nociception test, only CF and MF significantly reduced the orofacial nociceptive behavior with inhibition percentage values of 48.1% (100 mg/kg, CF), 56.1% (200 mg/kg, CF), 66.4% (400 mg/kg, CF), 48.2 (200 mg/kg, MF) and 60.1 (400 mg/kg, MF). Furthermore, treatment of the animals with EE, CF and MF was not able to promote motor activity changes. These data demonstrate that S. cordifolia has a pronounced antinociceptive activity on orofacial nociception. However, pharmacological and chemical studies are necessary in order to characterize the responsible mechanisms for this antinociceptive action and also to identify other bioactive compounds present in S. cordifolia. Copyright © 2011 John Wiley & Sons, Ltd.

Therapeutic Effects of "Ibuprofen, Diphenhydramine and Aluminium MgS" on Recurrent Aphthous Stomatitis: A Randomized Controlled Trial.

Directory of Open Access Journals (Sweden)

Katayoun Borhan-Mojabi

2014-04-01

Full Text Available Recurrent aphthous stomatitis (RAS is the most common and painful oral inflammatory lesion with an unknown etiology. This study aims to determine the therapeutic effects of ibuprofen, diphenhydramine and aluminum magnesium simethicone (AlMgS syrup on reducing oral aphthous ulcer pain.Thirty-one patients with RAS participated in this double-blind clinical trial. Subjects were randomly divided into two groups. The control group (n=14 received drug mixture as drug A (diphenhydramine and AlMgS and the case group (n=17 received drug B (ibuprofen, diphenhydramine and AlMgS. Drugs were topically applied on ulcers by the patients three times a day for 3 days. Patients were re-examined for the symptoms on the fourth day following their first visits using VAS (Visual Analogue Scale tool. Statistical analysis was performed using paired t-test, independent t-test and chi-square test.The mean of pain reduction was 3.17±2 (P<0.001 and 3.82±1.79 (P<0.001 in the case and control group, respectively. The difference in pain reduction between both groups was not statistically significant. In addition, no significant difference was detected between the two groups regarding the duration of pain or burning sensation (P=0.57.The results of this study demonstrate that in comparison with diphenhydramine and AlMgS syrup, the studied mixture did not effectively reduce the level of pain, duration and burning sensation.

What is the Right Temperature Sensitivity for Foraminiferal Mg/ca Paleothermometry in Ancient Oceans?

Science.gov (United States)

Eggins, S.; Holland, K.; Hoenisch, B.; Spero, H. J.; Allen, K. A.

2013-12-01

Mg/Ca seawater thermometry has become a cornerstone of modern paleoceanography. Laboratory experiments, seafloor core-top samples, plankton trap and tow collected materials all indicate consistent temperature sensitivity (9-10% increase in Mg/Ca per °C) for a full range of modern planktic foraminifer species. While these results demonstrate the overall robustness of Mg/Ca paleothermometry for the modern ocean, it is an empirical tool for which there is limited understanding of its bio-physio-chemical basis and its applicability to ancient oceans. We have undertaken experimental cultures of Orbulina universa, Globigerinoides sacculifer and Globigerinoides ruber (pink) across a range of seawater compositions (temperature, carbonate chemistry and Mg/Casw) that encompass modern and ancient Paleogene and Cretaceous ocean compositions (Mg/Casw 0.25x to 2x modern and pCO2 = 200 to 1500 ppmv). Our results reveal that the sensitivity of the Mg/Ca-thermometer for planktic foraminifers reduces significantly with Mg/Casw, rather than remaining constant as has been widely assumed or, increasing at lower Mg/Casw as proposed recently by Evans and Müller (2012). These results indicate that the modern sensitivity of 9-10% increase in Mg/Ca per °C cannot yet be applied to obtain reliable relative temperature change estimates to ancient oceans. These results further suggest that variations in foraminiferal Mg/Ca compositions in ancient oceans with lower Mg/Casw may correspond to larger temperature variations than in the modern ocean. Evans D. and Müller W., Paleoceanography, vol. 27, PA4205, doi:10.1029/2012PA002315, 2012

40 CFR 141.623 - Reduced monitoring.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Reduced monitoring. 141.623 Section....623 Reduced monitoring. (a) You may reduce monitoring to the level specified in the table in this paragraph (a) any time the LRAA is ≤0.040 mg/L for TTHM and ≤0.030 mg/L for HAA5 at all monitoring locations...

Doping effects of carbon and titanium on the critical current density of MgB2

International Nuclear Information System (INIS)

Shen, T M; Li, G; Cheng, C H; Zhao, Y

2006-01-01

MgB 2 bulks doped with Ti or/and C were prepared by an in situ solid state reaction method to determine the combined effect of C and Ti doping and to probe the detailed mechanism. The magnetization measurement shows that Mg 0.95 Ti 0.05 B 1.95 C 0.05 sample has significantly improved flux pinning compared to the MgB 1.95 C 0.05 sample at 20 K, indicating that C and Ti are largely cooperative in improving the J c (H) behaviour. No TiC phase was detected in the x-ray diffraction (XRD) patterns. Moreover, the overlap of the (100) peaks of MgB 1.95 C 0.05 and Mg 0.95 Ti 0.05 B 1.95 C 0.05 showed that Ti doping does not reduce the amount of C in MgB 2 . Microstructural analyses revealed that the addition of Ti eliminated the porosity present in the carbon-doped MgB 2 pellet, resulting in an improved intergrain connectivity and an increase of effective current pass. Further, MgB 2 doped with C and Ti, which mainly consists of spherical grains about 200-300 nm in size, shows an higher grain homogeneity than the C-doped sample, suggesting that the Ti doping in MgB 1-x C x has played an important role in obtaining uniform grains

Microwave-assisted synthesis of lanthanum conversion coating on Mg-Li alloy and its corrosion resistance

International Nuclear Information System (INIS)

Song Dalei; Jing Xiaoyan; Wang Jun; Lu Shanshan; Yang Piaoping; Wang Yanli; Zhang Milin

2011-01-01

Graphical abstract: Highlights: → The method of microwave is used to synthesize lanthanum conversion coating. → Lanthanum conversion coating on Mg-Li alloy was studied. → Different conditions between room temperature and microwave were compared. → The corrosion behavior of lanthanum conversion coatings was studied. → The corrosion mechanism of lanthanum conversion coatings was studied. - Abstract: Lanthanum-based conversion coating on Mg-Li alloy has been prepared by a microwave-assisted method. X-ray diffractions (XRD) indicate that the intermetallic compounds of lanthanum are formed on Mg-Li alloy surface. Scanning electron microscopy (SEM) images show that the coating has different morphologies and special structures. The corrosion resistance was assessed by means of potentiodynamic polarization curves and electrochemical impedance spectra (EIS). The results indicate that this coating significantly reduces the corrosion rate of Mg-Li alloy in NaCl solution. A comparing experiment indicates that the coating prepared by microwave-assisted process has superior corrosion resistance to the coating obtained at room temperature.

Intravenous immunoglobulin G (IVIG) therapy for significant hyperbilirubinemia in ABO hemolytic disease of the newborn.

Science.gov (United States)

Miqdad, A M; Abdelbasit, O B; Shaheed, M M; Seidahmed, M Z; Abomelha, A M; Arcala, O P

2004-09-01

Although intravenous immunoglobulin G (IVIG) therapy has been reported in hyperbilirubinemia of Rh hemolytic disease, its use in ABO hemolytic disease has been reported in only a few studies. In our institute we have observed that almost 30% of babies with hyperbilirubinemia due to ABO hemolytic disease required exchange transfusion. To determine whether administration of IVIG to newborns with significant hyperbilirubinemia due to ABO hemolytic disease would reduce the need for exchange transfusion as a primary goal in these babies. This was a prospective study involving all newborns with significant hyperbilirubinemia due to direct Coombs-positive ABO hemolytic disease. All healthy term babies with ABO hemolytic disease with positive direct Coombs test in the period between 2000 and 2002 were identified. Significant hyperbilirubinemia was defined as hyperbilirubinemia requiring phototherapy and/or rising by 8.5 micromol/l per h (0.5 mg/dl per h) or more to require exchange transfusion. Babies were randomly assigned into two groups: group 1 (study group) received phototherapy plus IVIG (500 mg/kg); and group 2 (control group) received phototherapy alone. Exchange transfusion was carried out in any group if at any time the bilirubin level reached 340 micromol/l (20 mg/dl) or more, or rose by 8.5 micromol/l per h (0.5 mg/dl per h) in group 2. A total of 112 babies were enrolled over 2 years, 56 in each group. Exchange transfusion was carried out in four babies in the study group, while 16 babies in the control group required exchange. Late anemia was not of concern in either group. No adverse effects related to IVIG administration were recorded. Administration of IVIG to newborns with significant hyperbilirubinemia due to ABO hemolytic disease with positive direct Coomb's test reduces the need for exchange transfusion without producing immediate adverse effects.

Ab-initio calculations of semiconductor MgGeP{sub 2} and MgGeAs{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Kocak, B.; Ciftci, Y.O., E-mail: yasemin@gazi.edu.tr

2016-05-15

Highlights: • MgGeP{sub 2} and MgGeAs{sub 2} are semiconductor compounds. • MgGeP{sub 2} and MgGeAs{sub 2} are energetically, mechanically and dynamically stable. • The electronic charge density contour plot shows that the nature of bonding is a mixture of ionic-covalent. - Abstract: In this study, we focus on structural, electronic, elastic, lattice dynamic and optic properties of MgGeP{sub 2} and MgGeAs{sub 2} using ab-initio density-functional theory (DFT) within Armiento-Mattson 2005 (AM05) scheme of the generalized gradient approximation (GGA) for the exchange-correlation potential. Our computed structural results are in reasonable agreement with the literature. The band gap of these compounds is predicted to be direct. Our elastic results prove that these compounds are mechanically stable. The obtained phonon spectra of MgGeP{sub 2} and MgGeAs{sub 2} do not exhibit any significant imaginary branches using GGA-AM05 for the exchange-correlation approximation. Further analysis of the optical response of the dielectric functions, optical reflectivity, refractive index, extinction coefficient and electron energy loss delves into for the energy range of 0–22.5 eV. It motivated that there exists an optical polarization anisotropy of these compounds for optoelectronic device applications.

Multifunctional MgO Layer in Perovskite Solar Cells.

Science.gov (United States)

Guo, Xudong; Dong, Haopeng; Li, Wenzhe; Li, Nan; Wang, Liduo

2015-06-08

A multifunctional magnesium oxide (MgO) layer was successfully introduced into perovskite solar cells (PSCs) to enhance their performance. MgO was coated onto the surface of mesoporous TiO(2) by the decomposition of magnesium acetate and, therefore, could block contact between the perovskite and TiO(2). X-ray photoelectron spectroscopy and infrared spectroscopy showed that the amount of H(2)O/hydroxyl absorbed on the TiO(2) decreased after MgO modification. The UV/Vis absorption spectra of the perovskite with MgO modification revealed an enhanced photoelectric performance compared with that of unmodified perovskite after UV illumination. In addition to the photocurrent, the photovoltage and fill factor also showed an enhancement after modification, which resulted in an increase in the overall efficiency of the cell from 9.6 to 13.9 %. Electrochemical impedance spectroscopy (EIS) confirmed that MgO acts as an insulating layer to reduce charge recombination. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The comparison of the effects of standard 20 mg atorvastatin daily and 20 mg atorvastatin every other day on serum LDL-cholesterol and high sensitive C-reactive protein levels.

Science.gov (United States)

Keleş, Telat; Akar Bayram, Nihal; Kayhan, Tuğba; Canbay, Alper; Sahin, Deniz; Durmaz, Tahir; Ozdemir, Ozcan; Aydoğdu, Sinan; Diker, Erdem

2008-12-01

In this study, we aimed at comparing the effects of standard once daily 20 mg atorvastatin treatment with that of atorvastatin 20 mg administered every other day on serum lipids and high sensitive C-reactive protein (hs-CRP) levels. Sixty-one patients with serum total cholesterol levels of above 200 mg/dl and low density lipoprotein (LDL)--cholesterol levels of above 130 mg/dl were included in this prospective, randomized study. The patients were randomized into daily treatment of 20 mg atorvastatin (standard treatment) and 20 mg atorvastatin every other day (every other day treatment) groups. Before the treatment and at each visit, serum lipids and hs-CRP levels of all the patients were measured. Statistical analyses were performed Chi-square, unpaired t and two-way repeated measurements ANOVA tests. In the every other day treatment group, there was a 36.1% reduction in LDL-cholesterol levels by the end of first month (p0.05). The LDL cholesterol levels of the group receiving 20 mg atorvastatin every day was reduced by %41 by the end of 1 month (pevery other day, there was a 21% decrease in hs-CRP levels compared to the basal measurements at the end of first month (pevery day the decrease in hs-CRP levels at the end of one month was more striking (37%, p0.05). Alternate-day dosing of atorvastatin causes a significant lipid-lowering and antiinflammatory effects similar to that of daily administration and yet may provide some cost savings.

Discharge behaviour of Mg-Al-Pb and Mg-Al-Pb-In alloys as anodes for Mg-air battery

International Nuclear Information System (INIS)

Wang, Naiguang; Wang, Richu; Peng, Chaoqun; Peng, Bing; Feng, Yan; Hu, Chengwang

2014-01-01

Highlights: • We investigate the effect of indium on the discharge behaviour of Mg-Al-Pb alloy. • We evaluate the performance of Mg-air batteries with Mg-Al-Pb and Mg-Al-Pb-In anodes. • We analyze the activation mechanism of Mg-Al-Pb-In alloy in the discharge process. - Abstract: The discharge behaviour of Mg-Al-Pb and Mg-Al-Pb-In alloys in 3.5 wt.% NaCl solution is investigated by electrochemical techniques, and compared with that of pure magnesium. The results show that Mg-Al-Pb-In alloy provides a more negative potential and exhibits a higher utilization efficiency in contrast with Mg-Al-Pb alloy and pure magnesium during the half-cell test at a large current density, and gives desirable discharge performance when used as anode for Mg- air battery. The peak power density of the Mg-air battery with Mg-Al-Pb-In anode is 94.5 mW cm −2 , which is comparable with those of Mg-H 2 O 2 semi-fuel batteries. Moreover, the activation mechanism of Mg-Al-Pb-In alloy during the discharge process is also analyzed

A magnesium based phosphate binder reduces vascular calcification without affecting bone in chronic renal failure rats.

Directory of Open Access Journals (Sweden)

Ellen Neven

Full Text Available The alternative phosphate binder calcium acetate/magnesium carbonate (CaMg effectively reduces hyperphosphatemia, the most important inducer of vascular calcification, in chronic renal failure (CRF. In this study, the effect of low dose CaMg on vascular calcification and possible effects of CaMg on bone turnover, a persistent clinical controversy, were evaluated in chronic renal failure rats. Adenine-induced CRF rats were treated daily with 185 mg/kg CaMg or vehicle for 5 weeks. The aortic calcium content and area% calcification were measured to evaluate the effect of CaMg. To study the effect of CaMg on bone remodeling, rats underwent 5/6th nephrectomy combined with either a normal phosphorus diet or a high phosphorus diet to differentiate between possible bone effects resulting from either CaMg-induced phosphate deficiency or a direct effect of Mg. Vehicle or CaMg was administered at doses of 185 and 375 mg/kg/day for 8 weeks. Bone histomorphometry was performed. Aortic calcium content was significantly reduced by 185 mg/kg/day CaMg. CaMg ameliorated features of hyperparathyroid bone disease. In CRF rats on a normal phosphorus diet, the highest CaMg dose caused an increase in osteoid area due to phosphate depletion. The high phosphorus diet combined with the highest CaMg dose prevented the phosphate depletion and thus the rise in osteoid area. CaMg had no effect on osteoblast/osteoclast or dynamic bone parameters, and did not alter bone Mg levels. CaMg at doses that reduce vascular calcification did not show any harmful effect on bone turnover.

The effect of the MgO buffer layer thickness on magnetic anisotropy in MgO/Fe/Cr/MgO buffer/MgO(001)

Energy Technology Data Exchange (ETDEWEB)

Kozioł-Rachwał, Anna, E-mail: a.koziolrachwal@aist.go.jp [National Institute of Advanced Industrial Science and Technology, Spintronics Research Center, Tsukuba, Ibaraki 305-8568 (Japan); AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, al. Mickiewicza 30, 30-059 Kraków (Poland); Nozaki, Takayuki; Zayets, Vadym; Kubota, Hitoshi; Fukushima, Akio; Yuasa, Shinji [National Institute of Advanced Industrial Science and Technology, Spintronics Research Center, Tsukuba, Ibaraki 305-8568 (Japan); Suzuki, Yoshishige [National Institute of Advanced Industrial Science and Technology, Spintronics Research Center, Tsukuba, Ibaraki 305-8568 (Japan); Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama, Toyonaka, Osaka 560-8531 (Japan)

2016-08-28

The relationship between the magnetic properties and MgO buffer layer thickness d was studied in epitaxial MgO/Fe(t)/Cr/MgO(d) layers grown on MgO(001) substrate in which the Fe thickness t ranged from 0.4 nm to 1.1 nm. For 0.4 nm ≤ t ≤ 0.7 nm, a non-monotonic coercivity dependence on the MgO buffer thickness was shown by perpendicular magneto-optic Kerr effect magnetometry. For thicker Fe films, an increase in the buffer layer thickness resulted in a spin reorientation transition from perpendicular to the in-plane magnetization direction. Possible origins of these unusual behaviors were discussed in terms of the suppression of carbon contamination at the Fe surface and changes in the magnetoelastic anisotropy in the system. These results illustrate a method to control magnetic anisotropy in MgO/Fe/Cr/MgO(d) via an appropriate choice of MgO buffer layer thickness d.

Clinical trial: lansoprazole 15 or 30 mg once daily vs. placebo for treatment of frequent nighttime heartburn in self-treating subjects.

Science.gov (United States)

Peura, D A; Riff, D S; Snoddy, A M; Fennerty, M B

2009-09-01

Frequent nighttime heartburn is common. Lansoprazole 15 mg is indicated for treatment of heartburn and other gastro-oesophageal reflux disease-related symptoms. To evaluate the efficacy and safety of lansoprazole in self-treating subjects with frequent nocturnal heartburn. A total of 864 subjects with heartburn on >or=2 days/week over the past month were randomized to double-blind treatment with lansoprazole 15 or 30 mg or placebo each morning. Endpoints were percentage of night times without heartburn (primary), percentage of 24-h days without heartburn and percentage of subjects without heartburn on day 1. Mean percentage of night times without heartburn was significantly greater with lansoprazole 15 mg (61.3%) or lansoprazole 30 mg (61.7%) vs. placebo (47.8%) over 14 days (P heartburn and percentage of subjects without heartburn on day 1 were significantly greater with lansoprazole 15 or 30 mg vs. placebo. Both lansoprazole 15 and 30 mg were highly effective and well tolerated in reducing symptoms in subjects with frequent nighttime heartburn. The benefit of therapy on 24-h heartburn and nighttime heartburn on day 1 of treatment was also evident. Lansoprazole 15 mg is a suitable choice for management of frequent nighttime heartburn.

Microstructural evolution in Mg-rich Mg-Zn-Y alloys

International Nuclear Information System (INIS)

Biswas, T.; Ranganathan, S.; Nair, S.; Bajargan, G.

2005-01-01

Mg-rich Mg-Zn-Y alloys with nominal compositions Mg 97 Zn 1 Y 2 , Mg 97 Zn 2 Y 1 , Mg 92 Zn 6.5 Y 1.5 and Mg 97-x Zn 1 Y 2 Zr x have been chosen for the present study. These alloys are prepared by using sand casting mold. The sand cast alloys are remelted and subjected to copper mold casting and melt spinning techniques. The effect of cooling rate on microstructures was studied. It is observed that the size of the precipitates decreases with an increase of cooling rate. The formation of nano precipitates results in higher strength of the alloy as compared to the conventional alloys. The microstructures of melt spun ribbons are compared with RS/PM (rapidly solidified power metallurgy) Mg 97 Zn 1 Y 2 alloy, obtained from a different source. (author)

Global Investigation of the Mg Atom and ion Layers using SCIAMACHY/Envisat Observations between 70 km and 150 km Altitude and WACCM-MG Model Results

Science.gov (United States)

Langowski, M.; vonSavigny, C.; Burrows, J. P.; Feng, W.; Plane, J. M. C.; Marsh, D. R.; Janches, Diego; Sinnhuber, M.; Aikin, A. C.

2014-01-01

Mg and Mg+ concentration fields in the upper mesosphere/lower thermosphere (UMLT) region are retrieved from SCIAMACHY/Envisat limb measurements of Mg and Mg+ dayglow emissions using a 2-D tomographic retrieval approach. The time series of monthly means of Mg and Mg+ for number density as well as vertical column density in different latitudinal regions are shown. Data from the limb mesosphere-thermosphere mode of SCIAMACHY/Envisat are used, which covers the 50 km to 150 km altitude region with a vertical sampling of 3.3 km and a highest latitude of 82 deg. The high latitudes are not covered in the winter months, because there is no dayglow emission during polar night. The measurements were performed every 14 days from mid-2008 until April 2012. Mg profiles show a peak at around 90 km altitude with a density between 750 cm(exp-3) and 2000 cm(exp-3). Mg does not show strong seasonal variation at mid-latitudes. The Mg+ peak occurs 5-15 km above the neutral Mg peak at 95-105 km. Furthermore, the ions show a significant seasonal cycle with a summer maximum in both hemispheres at mid- and high-latitudes. The strongest seasonal variations of the ions are observed at mid-latitudes between 20-40 deg and densities at the peak altitude range from 500 cm(exp-3) to 6000 cm(exp-3). The peak altitude of the ions shows a latitudinal dependence with a maximum at mid-latitudes that is up to 10 km higher than the peak altitude at the equator. The SCIAMACHY measurements are compared to other measurements and WACCM model results. In contrast to the SCIAMACHY results, the WACCM results show a strong seasonal variability for Mg with a winter maximum, which is not observable by SCIAMACHY, and globally higher peak densities. Although the peak densities do not agree the vertical column densities agree, since SCIAMACHY results show a wider vertical profile. The agreement of SCIAMACHY and WACCM results is much better for Mg+, showing the same seasonality and similar peak densities. However

Efficacy of 5MG and 10MG rosuvastatin in type-2 diabetes mellitus with hypercholesteroalemia

International Nuclear Information System (INIS)

Ullah, F.; Rahim, F.; Rahman, S.U.; Ashfaq, M.; Afridi, A.K.

2015-01-01

Background: Coronary Heart Disease (CHD) is the most important complication and the leading cause of death in patients with type 2 diabetes mellitus (T2DM). Hypercholesterolemia is an important modifiable risk factor for CHD. Statins are the first line drugs for the treatment of hypercholesterolemia in DM. Comparative studies between different statins are available but different doses of the same statin have not been compared in our population. The objective of this study is to compare mean reduction in serum LDL-C level after using 5mg and 10mg of rosuvastatin among T2DM patients with hypercholesterolemia. This study will help finding lowest effective dose of rosuvastatin to achieve internationally set low density lipoprotein cholesterol (LDL-C) goals. Method: A total of 82 patients with T2DM having fasting LDL-C levels equal or more than 100mg/dl were randomly allocated into two groups with 41 patients in each group. Baseline fasting serum LCL-C levels were obtained in all patients. Group A received 5mg while group B received 10mg of rosuvastatin daily at night. After 6 weeks, fasting LDL-C levels were obtained and analysed to compare the mean±SD reduction of LDL-C levels in both groups. Results: Baseline mean±SD LDL-C levels in group A and group B were 134.12±30.02 and 143.49±32.01 respectively (p 0.176). Follow up mean ± SD LDL-C levels were 81.59±28.47 and 83.24±36.06 respectively (p 0.818). Mean ± SD reduction in LDL-C levels from baseline levels in group A and group B were 52.51±19.49 and 60.20±24.09 (p 0.116). Conclusion: Rosuvastatin 5mg is as effective as 10mg in reducing the LDL-C levels in type 2 diabetic patients with hypercholesterolemia. (author)

Cryogenic milling for the fabrication of high J{sub c} MgB{sub 2} bulk superconductors

Energy Technology Data Exchange (ETDEWEB)

Kim, D. N.; Kang, M. O.; Park, H. W. [Korea University of Technology and Education, Cheonan (Korea, Republic of); Jun, B. H.; Kim, C. J. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2017-06-15

Cryogenic milling which is a combined process of low-temperature treatment and mechanical milling was applied to fabricate high critical current density (J{sub c}) MgB{sub 2} bulk superconductors. Liquid nitrogen was used as a coolant, and no solvent or lubricant was used. Spherical Mg (6-12 μm, 99.9 % purity) and plate-like B powder (⁓ 1 μm, 97 % purity) were milled simultaneously for various time periods (0, 2, 4, 6 h) at a rotating speed of 500 rpm using ZrO{sub 2} balls. The (Mg{sup +2B}) powders milled were pressed into pellets and heat-treated at 700°C for 1 h in flowing argon. The use of cryomilled powders as raw materials promoted the formation reaction of superconducting MgB{sub 2}, reduced the grain size of MgB{sub 2}, and suppressed the formation of impurity MgO. The superconducting critical temperature (T{sub c}) of MgB{sub 2} was not influenced as the milling time (t) increased up to 6 h. Meanwhile, the critical current density (J{sub c}) of MgB{sub 2} increased significantly when t increased to 4 h. When t increased further to 6 h, however, Jc decreased. The J{sub c} enhancement of MgB{sub 2} by cryogenic milling is attributed to the formation of the fine grain MgB{sub 2} and a suppression of the MgO formation.

Sexual asthenia: Tradamixina versus Tadalafil 5 mg daily

Science.gov (United States)

2012-01-01

Background Reduced libido is widely considered the most prominent symptomatic reflection of low testosterone (T) levels in men. Testosterone deficiency (TD) afflicts approximately 30% of men aged 40-79 years. This study seeks to evaluate the effect of a new natural compound “tradamixina “in order to improve male sexual function in elderly men, particularly libido and possible erectile dysfunction, versus administration of tadalafil 5 mg daily. Methods Seventy patients (67.3± 3.7 years) with stable marital relations and affected by reduced libido, with or without erectile dysfunction were recruited. They were randomly separated in 2 groups A-B of 35. Group A was administered twice a day a new compound “Tradamixina” (150 mg of Alga Ecklonia Bicyclis, 396 mg of Tribulus Terrestris and 144 mg of D-Glucosamine and N-Acetyl-D-Glucosamine) for two months, while Group B was administered tadalafil 5 mg daily, for two months. At visit and after 60 days of treatment patients were evaluated by means of detailed medical and sexual history, clinical examination, laboratory investigations (Total and Free T), instrumental examination (NPTR- nocturnal penile tumescence and rigidity test- with Rigiscan). Patients completed a self-administered IIEF questionnaire (The international index of erectile function) and SQoLM questionnaire (Sexual quality of life Questionnarie-Male). The results pre and post treatment were compared by Student t test (p<0.005). Results After 2 months of treatment in group A serum TT levels (230±18 ng/dl vs 671±14 ng/dl ) and FT levels(56± 2.4 pg/ml vs 120± 3.9pg/ml) increased, while in group B serum TT levels (245±12 ng/dl vs 247±15 ng/dl ) and FT levels(53± 0.3 pg/ml vs 55± 0.5pg/ml) increased not statistically significant. The patient’s numbers with negative NPTR improved after treatment in group A and B (15 vs 18 and 13 vs 25 respectively). The IIEF total score in group A increased after treatment with tradamixina (15±1.5 vs 29.77±1

Improved thermal stability of gas-phase Mg nanoparticles for hydrogen storage

NARCIS (Netherlands)

Krishnan, Gopi; Palasantzas, G.; Kooi, B. J.

2010-01-01

This work focuses on improving the thermal stability of Mg nanoparticles (NPs) for use in hydrogen storage. Three ways are investigated that can achieve this goal. (i) Addition of Cu prevents void formation during NP production and reduces the fast evaporation/voiding of Mg during annealing. (ii)

Nano-CL-20/HMX Cocrystal Explosive for Significantly Reduced Mechanical Sensitivity

Directory of Open Access Journals (Sweden)

Chongwei An

2017-01-01

Full Text Available Spray drying method was used to prepare cocrystals of hexanitrohexaazaisowurtzitane (CL-20 and cyclotetramethylene tetranitramine (HMX. Raw materials and cocrystals were characterized using scanning electron microscopy, X-ray diffraction, differential scanning calorimetry, Raman spectroscopy, and Fourier transform infrared spectroscopy. Impact and friction sensitivity of cocrystals were tested and analyzed. Results show that, after preparation by spray drying method, microparticles were spherical in shape and 0.5–5 µm in size. Particles formed aggregates of numerous tiny plate-like cocrystals, whereas CL-20/HMX cocrystals had thicknesses of below 100 nm. Cocrystals were formed by C–H⋯O bonding between –NO2 (CL-20 and –CH2– (HMX. Nanococrystal explosives exhibited drop height of 47.3 cm, and friction demonstrated explosion probability of 64%. Compared with raw HMX, cocrystals displayed significantly reduced mechanical sensitivity.

Randomised clinical trial: daily pantoprazole magnesium 40 mg vs. esomeprazole 40 mg for gastro-oesophageal reflux disease, assessed by endoscopy and symptoms.

Science.gov (United States)

Moraes-Filho, J P; Pedroso, M; Quigley, E M M

2014-01-01

Pantoprazole magnesium (pantoprazole-Mg) may display extended inhibition of the proton pump with the potential for improved clinical efficacy in gastro-oesophageal reflux disease (GERD). To compare the efficacy of pantoprazole-Mg and esomeprazole in GERD. Gastro-oesophageal reflux disease (Los Angeles grades A-D) patients were randomised to 4 weeks of treatment with pantoprazole-Mg (n = 290) or esomeprazole (n = 288), both 40 mg once daily, in this multicentre (14 Brazilian sites in 9 cities), double-blind study, with an additional 4 weeks' treatment in nonresponding patients. Severity of oesophagitis (at endoscopy) and GERD-related symptoms (ReQuest-GI) were assessed. The primary end point was the proportion of patients in complete remission (ReQuest-GI score <1.73 plus endoscopic healing) at week 4. Complete remission occurred in 61% of patients in each treatment group at 4 weeks (primary endpoint) and in 81% and 79% of patients in the pantoprazole-Mg and esomeprazole groups at 8 weeks, with no significant differences. Mucosal healing rates were high and not significantly different. At 8 weeks, symptom relief with pantoprazole-Mg was significantly greater than that with esomeprazole (91.6% vs. 86.0%, P = 0.0370) because of continued improvement in symptoms with pantoprazole-Mg from week 4 to week 8 (P = 0.0206). Pantoprazole-Mg 40 mg was at least as effective as esomeprazole 40 mg for complete remission and the mucosal healing rate was high. Symptom relief with pantoprazole-Mg continued to improve from 4 to 8 weeks and was greater than that with esomeprazole at week 8, suggesting an extended period of treatment effect (ClinicalTrials.gov identifier: NCT01132638). © 2013 John Wiley & Sons Ltd.

Adsorption of arginine, glycine and aspartic acid on Mg and Mg-based alloy surfaces: A first-principles study

Science.gov (United States)

Fang, Zhe; Wang, Jianfeng; Yang, Xiaofan; Sun, Qiang; Jia, Yu; Liu, Hairong; Xi, Tingfei; Guan, Shaokang

2017-07-01

Studying the adsorption behaviors of biomolecules on the surface of Mg and Mg-based alloy has a fundamental and important role for related applications in biotechnology. In the present work, we systematically investigate and compare the adsorption properties of three typical amino acids, i.e., Arg (arginine), Gly (glycine) and Asp (aspartic acid), which form RGD tripeptide, on the Mg (0 0 0 1) surface with various doping (Zn, Y, and Nd), and aim to realize proper binding between biomolecules and Mg and Mg-based biomedical materials. Our results show that flat adsorption configurations of the functional groups binding to the surfaces are favored in energy for all the three selected amino acids. In specific, for the amino acids adsorped on clean Mg (0 0 0 1) surface, the adsorption energy (Eads) of Arg is found to be -1.67 eV for the most stable configuration, with amino and guanidyl groups binding with the surface. However, Gly (Asp) is found to binding with the surface through amino and carboxyl groups, with a -1.16 eV (-1.15 eV) binding energy. On the 2% Zn doped Mg (0 0 0 1) alloy surface (Mg-Zn (2%)), the Eads are significantly increased to be -1.91 eV, -1.32 eV and -1.35 eV for Arg, Gly and Asp, respectively. While the Mg-Y (1%) and Mg-Nd (1%) slightly weaken the adsorption of three amino acids. Moreover, we have performed detail discussions of the binding properties between amino acids and surfaces by projected density of states (PDOS) combined with charge transfer analyses. Our studies provide a comprehensive understanding on the interactions between amino acids and Mg and Mg-based alloy surfaces, with respect to facilitate the applications of Mg and Mg-based biomedical alloys in biosensing, drug delivery, biomolecule coating and other fields in biotechnology.

X-ray Raman scattering study of MgSiO₃ glass at high pressure: Implication for triclustered MgSiO₃ melt in Earth's mantle

Energy Technology Data Exchange (ETDEWEB)

Lee, Sung Keun; Lin, Jung-Fu; Cai, Yong Q.; Hiraoka, Nozomu; Eng, Peter J.; Okuchi, Takuo; Mao, Ho-kwang; Meng, Yue; Hu, Michael Y.; Chow, Paul; Shu, Jinfu; Li, Baosheng; Fukui, Hiroshi; Lee, Bum Han; Kim, Hyun Na; Yoo, Choong-Shik [SNU; (LLNL); (NSRRC); (Okayama); (UC); (CIW); (Wash State U); (Nagoya); (SBU)

2015-02-09

Silicate melts at the top of the transition zone and the core-mantle boundary have significant influences on the dynamics and properties of Earth's interior. MgSiO₃-rich silicate melts were among the primary components of the magma ocean and thus played essential roles in the chemical differentiation of the early Earth. Diverse macroscopic properties of silicate melts in Earth's interior, such as density, viscosity, and crystal-melt partitioning, depend on their electronic and short-range local structures at high pressures and temperatures. Despite essential roles of silicate melts in many geophysical and geodynamic problems, little is known about their nature under the conditions of Earth's interior, including the densification mechanisms and the atomistic origins of the macroscopic properties at high pressures. Here, we have probed local electronic structures of MgSiO₃ glass (as a precursor to Mg-silicate melts), using high-pressure x-ray Raman spectroscopy up to 39 GPa, in which high-pressure oxygen K-edge features suggest the formation of tricluster oxygens (oxygen coordinated with three Si frameworks; ^[3]O) between 12 and 20 GPa. Our results indicate that the densification in MgSiO₃ melt is thus likely to be accompanied with the formation of triculster, in addition to a reduction in nonbridging oxygens. The pressure-induced increase in the fraction of oxygen triclusters >20 GPa would result in enhanced density, viscosity, and crystal-melt partitioning, and reduced element diffusivity in the MgSiO₃ melt toward deeper part of the Earth's lower mantle.

Laser cladding of a Mg based Mg–Gd–Y–Zr alloy with Al–Si powders

International Nuclear Information System (INIS)

Chen, Erlei; Zhang, Kemin; Zou, Jianxin

2016-01-01

Graphical abstract: A Mg based Mg–Gd–Y–Zr alloy was treated by laser cladding with Al–Si powders at different laser scanning speeds. The laser clad layer mainly contains Mg_2Si, Mg_1_7Al_1_2 and Al_2(Gd,Y) phases distributed in the Mg matrix. After laser cladding, the corrosion resistance of the Mg alloy was significantly improved together with increased microhardness in the laser clad layers. - Highlights: • A Mg based Mg–Gd–Y–Zr alloy was laser clad with Al–Si powders. • The microstructure and morphology vary with the depth of the clad layer and the laser scanning speed. • Hardness and corrosion resistance were significantly improved after laser cladding. - Abstract: In the present work, a Mg based Mg–Gd–Y–Zr alloy was subjected to laser cladding with Al–Si powders at different laser scanning speeds in order to improve its surface properties. It is observed that the laser clad layer mainly contains Mg_2Si, Mg_1_7Al_1_2 and Al_2(Gd,Y) phases distributed in the Mg matrix. The depth of the laser clad layer increases with decreasing the scanning speed. The clad layer has graded microstructures and compositions. Both the volume fraction and size of Mg_2Si, Mg_1_7Al_1_2 and Al_2(Gd,Y) phases decreases with the increasing depth. Due to the formation of these hardening phases, the hardness of clad layer reached a maximum value of HV440 when the laser scanning speed is 2 mm/s, more than 5 times of the substrate (HV75). Besides, the corrosion properties of the untreated and laser treated samples were all measured in a NaCl (3.5 wt.%) aqueous solution. The corrosion potential was increased from −1.77 V for the untreated alloy to −1.13 V for the laser clad alloy with scanning rate of 2 mm/s, while the corrosion current density was reduced from 2.10 × 10"−"5 A cm"−"2 to 1.64 × 10"−"6 A cm"−"2. The results show that laser cladding is an efficient method to improve surface properties of Mg–Rare earth alloys.

Role of dopants in LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P detectors

International Nuclear Information System (INIS)

Mohammadi, Kh.; Moussavi Zarandi, A.; Afarideh, H.; Shahmaleki, S.

2013-01-01

In this study, electronic structure of LiF crystal doped with Mg,Cu,P impurities was studied with WIEN2k code on the basis of FPLAPW+lo method. Results show that in Mg-doped LiF composition, an electronic trap was created with impurity concentration of 1.56% and 3.125%. In this condition, the electronic trap with increasing the percentage of the impurities up to 4.687% is annihilated. It was found, that by doping of Mg and Cu or P simultaneously, a hole-trap is created in valence band. It was realized that in LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P, Cu impurity and Li atom, have a key role in creation of levels which lead to create electronic and hole traps. Mg impurity and F atom, only have a role in creation of electronic traps. In addition, P impurity has a main role in creation of the electronic and hole traps in LiF:Mg,Cu,P. The activation energy of electronic and hole trap in LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P crystalline lattice were obtained as 0.3 and 5.5 eV, 0.92 and 3.4 eV and 0.75 and 3.1 eV, respectively. - Graphical abstract: Figure (a) and (b) shows changes in electronic structure and band gap energy of LiF crystal due to presence of Mg and Cu, Mg and P ions respectively. - Highlights: • Electronic structure of LiF, LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P materials were studied with WIEN2K code. • In LiF:Mg,Cu and LiF:Mg,Cu,P, Li atom and Cu impurity have a key role in creation of levels. • F atom and Mg impurity only have a role in creation of electronic traps. • In LiF:Mg,Cu,P, P impurity has a main role in creation of electronic and hole traps

Green emission from ZnO–MgO nanocomposite due to Mg diffusion at the interface

International Nuclear Information System (INIS)

Sowri Babu, K.; Ramachandra Reddy, A.; Venugopal Reddy, K.

2015-01-01

The origin and electronic transitions responsible for green emission observed from ZnO–MgO nanocomposite are investigated. The photoluminescence (PL) spectrum of ZnO–MgO nanocomposite annealed at 600 °C showed only a sharp and intense UV emission peak centered at 396 nm. As the annealing temperature increased from 600 °C to 1000 °C, the green emission positioned at 503 nm is emerged and its intensity enhanced gradually and reached maximum value at 900 °C and then decreased at 1000 °C. It is observed that both UV and green emission intensities are enhanced with variation of atomic ratio (Zn/Mg=1.52, 0.50, 0.30, 0.21, 0.15). Our experiments confirmed that the enhancement of green emission intensity is due to the formation of oxygen vacancies (V o ) due to Mg doping at the interface of ZnO and MgO. This experimental observation is in good agreement with the recent theoretical predictions which states that Mg doping in ZnO lowers the formation energies of oxygen vacancies (V o ) and zinc interstitials (Zn i ) significantly. PL excitation and emission spectra analysis reveals that excited state for both UV and green emissions is same and lies 0.24 eV below the conduction band of ZnO. Hence, the green emission is attributed to the transition of an electron form the shallow donor (defect level of Zn i ) to the deep acceptor (defect level of V o ). - Highlights: • It is found that the UV emission intensity from ZnO–MgO nanocomposite enhanced with increase of Mg concentration. • The intensity of the green emission is enhanced gradually as the temperature increased from 600 °C to 900 °C and then decreased at 1000 °C. • The effect of Mg concentration, MgO, strain at the interface on green emission is investigated. • These experiments confirmed that green emission is due to the oxygen vacancies created in ZnO due to the Mg doping at the interface and it is in good agreement with the theoretical predictions. • The decrease of green emission intensity is

Soluble CD36 and risk markers of insulin resistance and atherosclerosis are elevated in polycystic ovary syndrome and significantly reduced during pioglitazone treatment

DEFF Research Database (Denmark)

Glintborg, Dorte; Højlund, Kurt; Andersen, Marianne

2007-01-01

Objective: We investigated the relation between soluble CD36 (sCD36), risk markers of atherosclerosis and body composition, and glucose and lipid metabolism in polycystic ovary syndrome (PCOS) Research Design and Methods: Thirty PCOS patients were randomized to pioglitazone, 30 mg/day or placebo...... units), oxLDL (44.9 (26.9 - 75.1) vs. 36.1 (23.4 - 55.5) U/l), and hsCRP (0.26 (0.03 - 2.41) vs. 0.12 (0.02 - 0.81) mg/dl) were significantly increased in PCOS patients vs. controls (geometric mean (+/- 2SD)). In PCOS, positive correlations were found between central fat mass and sCD36 (r=0.43), hs......CRP (r=0.43), and IL-6 (r=0.42), all pPCOS patients and controls (n=44). sCD36 and oxLDL were significant...

MgFe{sub 2}O{sub 4}/ZrO{sub 2} composite nanoparticles for hyperthermia applications

Energy Technology Data Exchange (ETDEWEB)

Rashid, Amin ur [Magnetism Laboratory, Department of Physics, COMSATS Institute of Information Technology, Islamabad (Pakistan); Department of Applied Physical and Material Sciences, University of Swat, Khyber Pakhtunkhwa (Pakistan); Humayun, Asif [Magnetism Laboratory, Department of Physics, COMSATS Institute of Information Technology, Islamabad (Pakistan); Manzoor, Sadia, E-mail: sadia_manzoor@comsats.edu.pk [Magnetism Laboratory, Department of Physics, COMSATS Institute of Information Technology, Islamabad (Pakistan)

2017-04-15

MgFe{sub 2}O{sub 4}/ZrO{sub 2} composites containing ZrO{sub 2} in different weight percentages from 0% to 80% were prepared via the citrate gel technique as potential candidate materials for magnetic hyperthermia. The biocompatible ceramic ZrO{sub 2} was introduced to prevent MgFe{sub 2}O{sub 4} nanoparticles from aggregation and to reduce their dipolar interactions in order to enhance the specific absorption rate (SAR). Structural and magnetic properties of the samples were studied using powder X-ray diffraction (XRD), transmission electron microscopy (TEM) and a vibrating sample magnetometer (VSM). Magnetically induced heating in radio frequency (RF) magnetic fields was observed in all samples. Most significantly, the sample with only 20 wt% MgFe{sub 2}O{sub 4} has been found to have a SAR that is larger than that of pure MgFe{sub 2}O{sub 4}. This is an important finding from the point of view of biomedical applications, because ZrO{sub 2} in known to have low toxicity and a higher biocompatibility as compared to ferrites. - Highlights: • MgFe{sub 2}O{sub 4} and ZrO{sub 2} composite nanoparticles with different weight percentages of ZrO{sub 2} were prepared via the citrate gel technique. • Significant variation in magnetic properties was observed with increasing the weight % of ZrO{sub 2}. • Magnetically induced heating was observed when the composites were subjected to RF magnetic field. • Most significantly, the sample 80 wt% ZrO{sub 2} has been found to have SAR that is larger than that of pure MgFe{sub 2}O{sub 4}. • The SAR was found to have a strong dependence on magnetic dipolar interactions.

Preparation and Hydrogen Storage Properties of Mg-Rich Mg-Ni Ultrafine Particles

Directory of Open Access Journals (Sweden)

Jianxin Zou

2012-01-01

Full Text Available In the present work, Mg-rich Mg-Ni ultrafine powders were prepared through an arc plasma method. The phase components, microstructure, and hydrogen storage properties of the powders were carefully investigated. It is found that Mg2Ni and MgNi2 could be obtained directly from the vapor state reactions between Mg and Ni, depending on the local vapor content in the reaction chamber. A nanostructured MgH2 + Mg2NiH4 hydrogen storage composite could be generated after hydrogenation of the Mg-Ni ultrafine powders. After dehydrogenation, MgH2 and Mg2NiH4 decomposed into nanograined Mg and Mg2Ni, respectively. Thermogravimetry/differential scanning calorimetry (TG/DSC analyses showed that Mg2NiH4 phase may play a catalytic role in the dehydriding process of the hydrogenated Mg ultrafine particles.

The significance of sensory appeal for reduced meat consumption.

Science.gov (United States)

Tucker, Corrina A

2014-10-01

Reducing meat (over-)consumption as a way to help address environmental deterioration will require a range of strategies, and any such strategies will benefit from understanding how individuals might respond to various meat consumption practices. To investigate how New Zealanders perceive such a range of practices, in this instance in vitro meat, eating nose-to-tail, entomophagy and reducing meat consumption, focus groups involving a total of 69 participants were held around the country. While it is the damaging environmental implications of intensive farming practices and the projected continuation of increasing global consumer demand for meat products that has propelled this research, when asked to consider variations on the conventional meat-centric diet common to many New Zealanders, it was the sensory appeal of the areas considered that was deemed most problematic. While an ecological rationale for considering these 'meat' alternatives was recognised and considered important by most, transforming this value into action looks far less promising given the recurrent sensory objections to consuming different protein-based foods or of reducing meat consumption. This article considers the responses of focus group participants in relation to each of the dietary practices outlined, and offers suggestions on ways to encourage a more environmentally viable diet. Copyright © 2014 Elsevier Ltd. All rights reserved.

LOW Mg/Si PLANETARY HOST STARS AND THEIR Mg-DEPLETED TERRESTRIAL PLANETS

Energy Technology Data Exchange (ETDEWEB)

Carter-Bond, Jade C.; O' Brien, David P. [Planetary Science Institute, 1700 E. Fort Lowell, Tucson, AZ 85719 (United States); Delgado Mena, Elisa; Israelian, Garik; Gonzalez Hernandez, Jonay I. [Instituto de Astrofisica de Canarias, 38200 La Laguna, Tenerife (Spain); Santos, Nuno C., E-mail: j.bond@unsw.edu.au [Centro de Astrofisica, Universidade do Porto, Rua das Estrelas, 4150-762 Porto (Portugal)

2012-03-15

Simulations have shown that a diverse range of extrasolar terrestrial planet bulk compositions are likely to exist based on the observed variations in host star elemental abundances. Based on recent studies, it is expected that a significant proportion of host stars may have Mg/Si ratios below 1. Here we examine this previously neglected group of systems. Planets simulated as forming within these systems are found to be Mg-depleted (compared to Earth), consisting of silicate species such as pyroxene and various feldspars. Planetary carbon abundances also vary in accordance with the host star C/O ratio. The predicted abundances are in keeping with observations of polluted white dwarfs, lending validity to this approach. Further studies are required to determine the full planetary impacts of the bulk compositions predicted here.

Development and properties of duplex MgF2/PCL coatings on biodegradable magnesium alloy for biomedical applications.

Science.gov (United States)

Makkar, Preeti; Kang, Hoe Jin; Padalhin, Andrew R; Park, Ihho; Moon, Byoung-Gi; Lee, Byong Taek

2018-01-01

The present work addresses the performance of polycaprolactone (PCL) coating on fluoride treated (MgF2) biodegradable ZK60 magnesium alloy (Mg) for biomedical application. MgF2 conversion layer was first produced by immersing Mg alloy substrate in hydrofluoric acid solution. The outer PCL coating was then prepared using dip coating technique. Morphology, elements profile, phase structure, roughness, mechanical properties, invitro corrosion, and biocompatibility of duplex MgF2/PCL coating were then characterized and compared to those of fluoride coated and uncoated Mg samples. The invivo degradation behavior and biocompatibility of duplex MgF2/PCL coating with respect to ZK60 Mg alloy were also studied using rabbit model for 2 weeks. SEM and TEM analysis showed that the duplex coating was uniform and comprised of porous PCL film (~3.3 μm) as upper layer with compact MgF2 (~2.2 μm) as inner layer. No significant change in microhardness was found on duplex coating compared with uncoated ZK60 Mg alloy. The duplex coating showed improved invitro corrosion resistance than single layered MgF2 or uncoated alloy samples. The duplex coating also resulted in better cell viability, cell adhesion, and cell proliferation compared to fluoride coated or uncoated alloy. Preliminary invivo studies indicated that duplex MgF2/PCL coating reduced the degradation rate of ZK60 Mg alloy and exhibited good biocompatibility. These results suggested that duplex MgF2/PCL coating on magnesium alloy might have great potential for orthopedic applications.

Presence and Impact of Surface Films formed on Mg in Chloroaluminate Electrolytes.

Energy Technology Data Exchange (ETDEWEB)

Hahn, Nathan [Argonne National Lab. (ANL), Argonne, IL (United States). Joint Center for Energy Storage Research (JCESR); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kotula, Paul G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wetzel, David J. [Argonne National Lab. (ANL), Argonne, IL (United States). Joint Center for Energy Storage Research (JCESR); Univ. of Illinois, Urbana-Champaign, IL (United States); Malone, Marvin A. [Argonne National Lab. (ANL), Argonne, IL (United States). Joint Center for Energy Storage Research (JCESR); Univ. of Illinois, Urbana-Champaign, IL (United States); Nuzzo, Ralph G. [Argonne National Lab. (ANL), Argonne, IL (United States). Joint Center for Energy Storage Research (JCESR); Univ. of Illinois, Urbana-Champaign, IL (United States); Zavadil, Kevin R. [Argonne National Lab. (ANL), Argonne, IL (United States). Joint Center for Energy Storage Research (JCESR); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-09-01

The impact of surface film formation on Mg is explored during electrodeposition and electrodissolution in two high activity, aprotic electrolytes: the all phenyl complex (APC) and the magnesium aluminum chloride complex (MACC). Where past studies have argued such films are benign, results show that interfacial films are responsible for controlling the Mg deposit structure when deposition and dissolution are conducted at the rates required for practical Mg batteries. Chronopotentiometry is shown to provide clear signatures of the impact of interfacial films on deposition and dissolution. The particular combination of cycling punctuated by periods of open circuit equilibration is shown to yield a noticeable decrease in coulombic efficiency over a 50 cycle sequence. High resolution electron imaging shows that cycling results in porosity development and accumulation of electrolyte constituents within the deposit. Reduced coulombic efficiency signaling Mg loss appears related to progressive isolation of a fraction of the deposit. Mg and electrolyte loss must be compensated for in a practical cell through the introduction of excess inventory and resulting in a reduced energy density of the system.

Synthesis of basalt fiber@Zn{sub 1-x}Mg{sub x}O core/shell nanostructures for selective photoreduction of CO{sub 2} to CO

Energy Technology Data Exchange (ETDEWEB)

Kwak, Byeong Sub; Kim, Kang Min [Department of Chemistry, College of Science, Yeungnam University, Gyeongsan, Gyeongbuk 38541 (Korea, Republic of); Park, Sun-Min, E-mail: psm@kicet.re.kr [Korea Institute of Ceramic Engineering and Technology (KICET), Jinju, Gyeongnam 52851 (Korea, Republic of); Kang, Misook, E-mail: mskang@ynu.ac.kr [Department of Chemistry, College of Science, Yeungnam University, Gyeongsan, Gyeongbuk 38541 (Korea, Republic of)

2017-06-15

Highlights: • ZnO and Zn{sub 1-x}Mg{sub x}O crystals were grown onto the BFs. • The core@shell structured BF@Zn{sub 1-x}Mg{sub x}O particles significantly increased the adsorption of CO{sub 2} gas. • The BF@ZnO or BF@Zn{sub 1-x}Mg{sub x}O particles selectively reduce the carbon dioxide to carbon monoxide. - Abstract: This study focused on the development of a catalyst for converting carbon dioxide, the main cause of global warming, into a beneficial energy source. Core@shell structured particles, BF@ZnO and BF@Zn{sub 1-x}Mg{sub x}O, are synthesized in order to selectively obtain CO gas from the photoreduction of CO{sub 2}. A modified sol-gel process is used to synthesize the core@shell structures with a three-dimensional microstructure, which are subsequently characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometry (EDAX), ultraviolet (UV)–vis absorption, photoluminescence (PL), and photocurrent density analysis. The CO{sub 2} adsorption abilities of the core@shell particles are estimated through CO{sub 2}-temperature programmed desorption (TPD). The core@shell structured BF@Zn{sub 1-x}Mg{sub x}O particles including the Mg ingredient significantly increased the adsorption of CO{sub 2} gas at the microfiber/nanoparticle interface. Both the BF@ZnO and BF@Zn{sub 1-x}Mg{sub x}O particles selectively reduce the carbon dioxide to carbon monoxide, with almost no other reduced products being observed. These results are attributed to the effective adsorption of CO{sub 2} gas and inhibited recombination of the photogenerated electron–hole pairs. BF@Zn{sub 0.75}Mg{sub 0.25}O exhibited superior photocatalytic behavior and selectively produced 5.0 μmolg{sub cat}{sup −1} L{sup −1} of CO gas after 8 h of reaction.

Recovery of SO2 and MgO from By-Products of MgO Wet Flue Gas Desulfurization.

Science.gov (United States)

Yan, Liyun; Lu, Xiaofeng; Wang, Quanhai; Guo, Qiang

2014-11-01

An industrial demonstration unit using natural gas as a heat source was built to calcine the by-products of MgO wet flue gas desulfurization from power plants; influencing factors on the SO 2 content in calciner gas were comprehensively analyzed; and an advantageous recycling condition of MgO and SO 2 from by-products was summarized. Results showed that the SO 2 content in the calciner gas was increased by more than 10 times under a lower excess air coefficient, a higher feed rate, a lower crystal water in by-products, and a higher feed port position. For the tests conducted under the excess air coefficient above and below one, the effect of the furnace temperature on the SO 2 content in the calciner gas was reversed. Results of activity analysis indicate that particles of MgO generated under the calcination temperature of 900-1,000°C had a high activity. In contrast, due to the slight sintering, MgO generated under the calcination temperature of 1,100°C had a low activity. To recycle SO 2 as well as MgO, a temperature range of 900-927°C for TE103 is proposed. These studies will prompt the desulfurization market diversification, reduce the sulfur's dependence on imports for making sulfuric acid, be meaningful to balance the usage of the natural resource in China, and be regarded as a reference for the development of this technology for other similar developing countries.

Effect of Cooling Rate and Chemical Modification on the Tensile Properties of Mg-5wt% Si Alloy

Science.gov (United States)

Mirshahi, Farshid; Meratian, Mahmood; Zahrani, Mohsen Mohammadi; Zahrani, Ehsan Mohammadi

Hypereutectic Mg-Si alloys are a new class of light materials usable for aerospace and other advanced engineering applications. In this study, the effects of both cooling rate and bismuth modification on the micro structure and tensile properties of hypereutectic Mg-5wt% Si alloy were investigated. It was found that the addition of 0.5% Bi, altered the morphology of primary Mg2Si particles from bulky to polygonal shape and reduced their mean size from more than 70 μm to about 30 (am. Also, the tensile strength and elongation of the modified alloy increased about 10% and 20%, respectively, which should be ascribed to the modification of Mg2Si morphology and more uniform distribution of the primary particles. Moreover, an increase in tensile strength value with increase in cooling rate were observed which is attributed to finer micro structure of alloy in higher cooling rates. It was observed that Bi addition is significantly more effective in refining the morphology of primary Mg2Si particles than applying faster cooling rates.

Effects of Sm addition on electromagnetic interference shielding property of Mg-Zn-Zr alloys

Energy Technology Data Exchange (ETDEWEB)

Yang, Chubin [Chongqing University, College of Materials Science and Engineering, National Engineering Research Center for Magnesium Alloy, Chongqing (China); Gannan Normal University, Jiangxi Provincial Engineering Research Center for Magnesium Alloy, Ganzhou (China); Pan, Fusheng; Chen, Xianhua [Chongqing University, College of Materials Science and Engineering, National Engineering Research Center for Magnesium Alloy, Chongqing (China); Luo, Ning [Gannan Normal University, Jiangxi Provincial Engineering Research Center for Magnesium Alloy, Ganzhou (China)

2017-06-15

The electromagnetic interference (EMI) shielding of Sm-containing magnesium alloys in the 30-1500 MHz testing frequency range was investigated by coaxial cable method. The results demonstrated that Mg-3Zn alloys displayed the best electromagnetic shielding property. When 0.5 wt% of Zr was added for crystal grain refinement, the shielding effectiveness (SE) was apparently reduced. The addition of the rare earth element Sm in ZK magnesium alloys can improve the electromagnetic interference shielding of magnesium alloys. The main reason for the differences in electromagnetic interference shielding of magnesium alloys was the change in conductivity. The addition of Zr in Mg-Zn alloys can refine the grains and consequently improve the grain boundary area significantly. Therefore, the number of irregularly arranged atoms at the grain boundaries increased, decreasing the conductivity of magnesium alloys and leading to a decrease in the electromagnetic interference shielding. Following the Sm addition, the Mg-Zn-Sm phase was precipitated at the grain boundaries and in cores. The precipitation of Sm-containing rare earth phases could consume the solid-soluted Zn atoms within the Mg, resulting in an increase in electrical conductivity and electromagnetic interference shielding improvement. (orig.)

Nanoparticle silver coexposure reduces the accumulation of weathered persistent pesticides by earthworms.

Science.gov (United States)

Mukherjee, Arnab; Hawthorne, Joseph; White, Jason C; Kelsey, Jason W

2017-07-01

Although the use of engineered nanomaterials continues to increase, how these materials interact with coexisting contaminants in the environment is largely unknown. The effect of silver (Ag) in bulk, ionic, and nanoparticle (NP; bare and polyvinyl pyrrolidone-coated) forms at 3 concentrations (0 mg/kg, 500 mg/kg, 1000 mg/kg, 2000 mg/kg; ion at 69 mg/kg, 138 mg/kg, 276 mg/kg) on the accumulation of field-weathered chlordane and dichlorodiphenyldichloroethylene + metabolites (DDX) by Eisenia fetida (earthworm) was investigated. Earthworm biomass and survival were unaffected by treatment. At the 500 mg/kg and 1000 mg/kg exposure levels, NP-exposed earthworms contained significantly greater Ag (194-245%) than did the bulk exposed organisms; NP size or coating had no impact on element content. Generally, exposure to Ag of any type or at any concentration significantly reduced pesticide accumulation, although reductions for DDX (35.1%; 8.9-47.0%) were more modest than those for chlordane (79.0%; 17.4-92.9%). For DDX, the reduction in pesticide accumulation was not significantly affected by Ag type or concentration. For chlordane, the 3 NP exposures suppressed chlordane accumulation significantly more than did bulk exposure; earthworms exposed to bulk Ag contained 1170 ng/g chlordane, but levels in the NP-exposed earthworms were 279 ng/g. At the 500 mg/kg exposure, the smallest coated NPs exerted the greatest suppression in chlordane accumulation; at the 2 higher concentrations, chlordane uptake was unaffected by NP size or coating. The findings show that in exposed earthworms Ag particle size does significantly impact accumulation of the element itself, as well as that of coexisting weathered pesticides. The implications of these findings with regard to NP exposure and risk are unknown but are the topic of current investigation. Environ Toxicol Chem 2017;36:1864-1871. © 2016 SETAC. © 2016 SETAC.

Low-Dose Dextromethorphan, a NADPH Oxidase Inhibitor, Reduces Blood Pressure and Enhances Vascular Protection in Experimental Hypertension

Science.gov (United States)

Wu, Tao-Cheng; Chao, Chih-Yu; Lin, Shing-Jong; Chen, Jaw-Wen

2012-01-01

Background Vascular oxidative stress may be increased with age and aggravate endothelial dysfunction and vascular injury in hypertension. This study aimed to investigate the effects of dextromethorphan (DM), a NADPH oxidase inhibitor, either alone or in combination treatment, on blood pressure (BP) and vascular protection in aged spontaneous hypertensive rats (SHRs). Methodology/Principal Findings Eighteen-week-old WKY rats and SHRs were housed for 2 weeks. SHRs were randomly assigned to one of the 12 groups: untreated; DM monotherapy with 1, 5 or 25 mg/kg/day; amlodipine (AM, a calcium channel blocker) monotherapy with 1 or 5 mg/kg/day; and combination therapy of DM 1, 5 or 25 mg/kg/day with AM 1 or 5 mg/kg/day individually for 4 weeks. The in vitro effects of DM were also examined. In SHRs, AM monotherapy dose-dependently reduced arterial systolic BP. DM in various doses significantly and similarly reduced arterial systolic BP. Combination of DM with AM gave additive effects on BP reduction. DM, either alone or in combination with AM, improved aortic endothelial function indicated by ex vivo acetylcholine-induced relaxation. The combination of low-dose DM with AM gave most significant inhibition on aortic wall thickness in SHRs. Plasma total antioxidant status was significantly increased by all the therapies except for the combination of high-dose DM with high-dose AM. Serum nitrite and nitrate level was significantly reduced by AM but not by DM or the combination of DM with AM. Furthermore, in vitro treatment with DM reduced angiotensin II-induced reactive oxygen species and NADPH oxidase activation in human aortic endothelial cells. Conclusions/Significance Treatment of DM reduced BP and enhanced vascular protection probably by inhibiting vascular NADPH oxidase in aged hypertensive animals with or without AM treatment. It provides the potential rationale to a novel combination treatment with low-dose DM and AM in clinical hypertension. PMID:23049937

Low-dose dextromethorphan, a NADPH oxidase inhibitor, reduces blood pressure and enhances vascular protection in experimental hypertension.

Directory of Open Access Journals (Sweden)

Tao-Cheng Wu

Full Text Available BACKGROUND: Vascular oxidative stress may be increased with age and aggravate endothelial dysfunction and vascular injury in hypertension. This study aimed to investigate the effects of dextromethorphan (DM, a NADPH oxidase inhibitor, either alone or in combination treatment, on blood pressure (BP and vascular protection in aged spontaneous hypertensive rats (SHRs. METHODOLOGY/PRINCIPAL FINDINGS: Eighteen-week-old WKY rats and SHRs were housed for 2 weeks. SHRs were randomly assigned to one of the 12 groups: untreated; DM monotherapy with 1, 5 or 25 mg/kg/day; amlodipine (AM, a calcium channel blocker monotherapy with 1 or 5 mg/kg/day; and combination therapy of DM 1, 5 or 25 mg/kg/day with AM 1 or 5 mg/kg/day individually for 4 weeks. The in vitro effects of DM were also examined. In SHRs, AM monotherapy dose-dependently reduced arterial systolic BP. DM in various doses significantly and similarly reduced arterial systolic BP. Combination of DM with AM gave additive effects on BP reduction. DM, either alone or in combination with AM, improved aortic endothelial function indicated by ex vivo acetylcholine-induced relaxation. The combination of low-dose DM with AM gave most significant inhibition on aortic wall thickness in SHRs. Plasma total antioxidant status was significantly increased by all the therapies except for the combination of high-dose DM with high-dose AM. Serum nitrite and nitrate level was significantly reduced by AM but not by DM or the combination of DM with AM. Furthermore, in vitro treatment with DM reduced angiotensin II-induced reactive oxygen species and NADPH oxidase activation in human aortic endothelial cells. CONCLUSIONS/SIGNIFICANCE: Treatment of DM reduced BP and enhanced vascular protection probably by inhibiting vascular NADPH oxidase in aged hypertensive animals with or without AM treatment. It provides the potential rationale to a novel combination treatment with low-dose DM and AM in clinical hypertension.

Dextromethorphan Reduces Postoperative Pain of Post Partum Tubal Ligation under General Anesthesia

Directory of Open Access Journals (Sweden)

N. Manochehrian

2009-04-01

Full Text Available Introduction & Objective: Postoperative pain has harmful effects in many systems. Dextromethorphan reduces postoperative pain in post partum tubal ligation under general anesthesia. Materials & Methods: In this research 40 patients with ASA class I and II in double blind randomized clinical trial were studied in two groups. 90 minutes before surgery the patients received 90 mg dextromethorphan or placebo (oral. The patients induced general anesthesia with thiopental (5mg/kg, fentanyl 1.5 g/kg and succinylcholin(1-1.5 mg/kg and maintenance with halothane and N2O 50%. Patients were observed studied for analgesic requirement, nausea, vomiting, urinary retention and respiratory depression in recovery and 2,4,8 and 24 hours after surgery. Results: There was no significant difference in age, education, . . . Pain in recovery, 2 and 4 hours after surgery in dextromethorphan was less than placebo group. The analgesic requirement (pethidine in dextromethophan was less than placebo group.Conclusion: Administration of 90 mg dextromethorphan 90 minutes before the surgery under GA reduces pain in recovery time , 2 and 4 hours after the surgery.

Re-examining the 26Mg(α ,α')26Mg reaction: Probing astrophysically important states in 26Mg

Science.gov (United States)

Adsley, P.; Brümmer, J. W.; Li, K. C. W.; Marín-Lámbarri, D. J.; Kheswa, N. Y.; Donaldson, L. M.; Neveling, R.; Papka, P.; Pellegri, L.; Pesudo, V.; Pool, L. C.; Smit, F. D.; van Zyl, J. J.

2017-11-01

Background: The 22Ne(α ,n )25Mg reaction is one of the neutron sources for the s process in massive stars. The properties of levels in 26Mg above the α -particle threshold control the strengths of the 22Ne(α ,n )25Mg and 22Ne(α ,γ )26Mg reactions. The strengths of these reactions as functions of temperature are one of the major uncertainties in the s process. Purpose: Information on the existence, spin, and parity of levels in 26Mg can assist in constraining the strengths of the 22Ne(α ,γ )26Mg and 22Ne(α ,n )25Mg reactions, and therefore in constraining s -process abundances. Methods: Inelastically scattered α particles from a 26Mg target were momentum-analyzed in the K600 magnetic spectrometer at iThemba LABS, South Africa. The differential cross sections of states were deduced from the focal-plane trajectory of the scattered α particles. Based on the differential cross sections, spin and parity assignments to states are made. Results: A newly assigned 0+ state was observed in addition to a number of other states, some of which can be associated with states observed in other experiments. Some of the deduced Jπ values of the states observed in the present study show discrepancies with those assigned in a similar experiment performed at RCNP Osaka. The reassignments and additions of the various states can strongly affect the reaction rate at low temperatures. Conclusion: The number, location, and assignment of levels in 26Mg that may contribute to the 22Ne+α reactions are not clear. Future experimental investigations of 26Mg must have an extremely good energy resolution to separate the contributions from different levels. Coincidence experiments of 26Mg provide a possible route for future investigations.

Superconducting tunnel junctions on MgB{sub 2} using MgO and CaF{sub 2} as a barrier

Energy Technology Data Exchange (ETDEWEB)

Sakoda, Masahito, E-mail: sakoda@cc.tuat.ac.jp [Department of Applied Physics, Tokyo University of Agriculture and Technology, 2-24-16, Koganei, Tokyo 184-8588 (Japan); Aibara, Masato; Mede, Kazuya; Kikuchi, Motoyuki; Naito, Michio [Department of Applied Physics, Tokyo University of Agriculture and Technology, 2-24-16, Koganei, Tokyo 184-8588 (Japan)

2016-11-15

Highlights: • We have revised the manuscript according to reviewer's comments. The details are in “Response to Reviewers”. • Superconducting junctions with MgO and CaF{sub 2} barrier were fabricated in order to improve the quality of junctions. • In SIN junctions with MgO barrier, clear superconducting gap was observed. (). • In SIS junctions with CaF2 barrier, Josephson current was observed over 30 K. (). • The compatibility of each barrier material at the upper and lower interfaces was clarified. (). - Abstract: We report the fabrication of superconducting tunnel junctions, both of superconductor–insulator-normal metal (SIN) and superconductor–insulator-superconductor (SIS), on MgB{sub 2} using MgO and CaF{sub 2} as a barrier. The SIN junctions fabricated using an MgO barrier showed excellent quasi-particle characteristics, including a large superconducting gap (Δ) of 2.5–3 meV and a low zero-bias conductance. We have also fabricated SIS junctions with an MgO barrier, but the quasi-particle characteristics of the SIS junctions are not as good as those of the SIN junctions, namely a reduced superconducting gap and a high zero-bias conductance. It appears that top MgB{sub 2} electrodes do not grow well on an MgO barrier, which is also suggested from in-situ RHEED observation. The SIN junctions fabricated using a CaF{sub 2} barrier showed less sharp quasi-particle characteristics than using an MgO barrier. However, the SIS junctions using a CaF{sub 2} barrier showed a fairly large I{sub c}R{sub N} value at 4.2 K over 1 mV and also exhibited finite Josephson current up to almost the film's T{sub c} (∼30 K). The RHEED observation revealed that top MgB{sub 2} electrodes grow well on a CaF{sub 2} barrier.

AP-1 Oligodeoxynucleotides Reduce Aortic Elastolysis in a Murine Model of Marfan Syndrome.

Science.gov (United States)

Arif, Rawa; Zaradzki, Marcin; Remes, Anca; Seppelt, Philipp; Kunze, Reiner; Schröder, Hannes; Schwill, Simon; Ensminger, Stephan M; Robinson, Peter N; Karck, Matthias; Müller, Oliver J; Hecker, Markus; Wagner, Andreas H; Kallenbach, Klaus

2017-12-15

Marfan syndrome is characterized by high expression of matrix metalloproteinases (MMPs) in aortic smooth muscle cells (AoSMCs) associated with medial elastolysis and aortic root aneurysm. We aimed to reduce aortic elastolysis through decrease of MMP expression with decoy oligodeoxynucleotides (dODNs) neutralizing the transcription factor activating factor-1 (AP-1). AP-1 abundance in nuclear extracts as well as MMP-2 and MMP-9 expression were significantly increased in isolated mAoSMC of mgR/mgR Marfan mice compared to wild-type cells. Exposure to AP-1 neutralizing dODNs resulted in a significant reduction of basal and interleukin-1β-stimulated MMP expression and activity in mAoSMCs. Moreover, increased migration and formation of superoxide radical anions was substantially decreased in mAoSMCs by AP-1 dODN treatment. Aortic grafts from donor Marfan mice were treated with AP-1- dODN ex vivo and implanted as infrarenal aortic interposition grafts in mgR/mgR mice. Pretreatment of aortic grafts with AP-1 dODN led to reduced elastolysis, macrophage infiltration, and MMP activity. Permeability of the endothelial monolayer was increased for dODN in mgR/mgR aortae with observed loss of tight junction proteins ZO-1 and occludin, enabling dODN to reach the tunica media. Targeting AP-1 activity offers a new potential strategy to treat the vascular phenotype associated with Marfan syndrome. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

Influence of Mg doping on the behaviour of polaronic light-induced absorption in LiNbO3

International Nuclear Information System (INIS)

Conradi, D.; Merschjann, C.; Schoke, B.; Imlau, M.; Corradi, G.; Polgar, K.

2008-01-01

Transient light-induced absorption changes α li (t), caused by optically generated small polarons, are investigated in LiNbO 3 :Mg below and above the optical-damage-resistance threshold (ODRT). The lifetime of α li (t) is reduced by three orders of magnitude above the ODRT while a significantly enhanced amplitude α max li is observed in the infrared. Our observations are in full accordance with the predictions of microscopic models for the ODRT, namely the removal of Nb Li antisite defects upon incorporation of Mg ions, and an enhanced dark conductivity. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (Abstract Copyright [2008], Wiley Periodicals, Inc.)

Endocannabinoid receptor blockade reduces alanine aminotransferase in polycystic ovary syndrome independent of weight loss.

Science.gov (United States)

Dawson, Alison J; Kilpatrick, Eric S; Coady, Anne-Marie; Elshewehy, Abeer M M; Dakroury, Youssra; Ahmed, Lina; Atkin, Stephen L; Sathyapalan, Thozhukat

2017-07-14

Evidence suggests that endocannabinoid system activation through the cannabinoid receptor 1 (CB1) is associated with enhanced liver injury, and CB1 antagonism may be beneficial. The aim of this study was to determine the impact of rimonabant (CB1 antagonist) on alanine aminotransferase (ALT), a hepatocellular injury marker, and a hepatic inflammatory cytokine profile. Post hoc review of 2 studies involving 50 obese women with PCOS and well matched for weight, randomised to weight reducing therapy; rimonabant (20 mg od) or orlistat (120 mg tds), or to insulin sensitising therapy metformin, (500 mg tds), or pioglitazone (45 mg od). No subject had non-alcoholic fatty liver disease (NAFLD). Treatment with rimonabant for 12 weeks reduced both ALT and weight (p weight. There was a significant reduction of weight with orlistat (p weight loss and hepatic inflammatory markers in obese women with PCOS without NAFLD. ISRCTN58369615 (February 2007; retrospectively registered) ISRCTN75758249 (October 2007; retrospectively registered).

Quantitative electron microscopy and spectroscopy of MgB2 wires and tapes

International Nuclear Information System (INIS)

Birajdar, B; Peranio, N; Eibl, O

2008-01-01

In MgB 2 the correlation of microstructure with superconducting properties, in particular the critical current density, requires powerful analytical tools. Critical current densities and electrical resistivities of different MgB 2 superconductors differ by orders of magnitudes and the current limiting mechanisms have not been fully understood. Granularity of MgB 2 is one significant reason for reduced critical current densities and is introduced intrinsically by the anisotropy of B c2 but also extrinsically by the microstructure of the material. B c2 enhancement by doping is another important challenge for chemical analysis and, at present, doping levels are not well controlled on the sub-μm scale. In this paper the quantitative electron microscopy and spectroscopy methods essential for the microstructural analysis of MgB 2 are described. By quantitative electron microscopy and spectroscopy we mean a combined SEM and TEM analysis that covers various length scales from μm to nm. Contamination-free sample preparation, chemical mapping including B, and advanced chemical quantification using x-ray microanalysis were essential elements of the applied methodology. The methodology was applied to in situ and ex situ MgB 2 wires and tapes with and without SiC additives. Quantitative B analysis by EDX spectroscopy was applied quantitatively in the SEM and TEM, which is a major achievement. Although MgB 2 is a binary system, the thermodynamics of phase formation is complex, and the complexity is dramatically increased if additives like SiC are used. The small, sub-μm grain sizes of the matrix and secondary phases require TEM methods. However, granularity on the μm scale was also identified and underlines the importance of the combined SEM and TEM studies. Significant differences in the microstructure were observed for in situ and ex situ samples. This holds particularly if SiC was added and yielded Mg 2 Si for in situ samples annealed at 600-650 deg. C and Mg-Si-O phases

Characterization of sulfate reducing bacteria isolated from urban soil

Science.gov (United States)

Zhang, Mingliang; Wang, Haixia

2017-05-01

Sulfate reducing bacteria (SRB) was isolated from urban soil and applied for the remediation of heavy metals pollution from acid mine drainage. The morphology and physiological characteristics (e.g. pH and heavy metals tolerance) of SRB was investigated. The SRB was gram-negative bacteria, long rod with slight curve, cell size 0.5× (1.5-2.0) μm. The pH of medium had significant effect on SRB growth and the efficiency of sulfate reduction, and it showed that the suitable pH range was 5-9 and SRB could not survive at pH less than 4. The maximum tolerance of Fe (II), Zn (II), Cd (II), and Cu (II) under acidic condition (pH 5.0) was about 600 mg/L, 150 mg/L, 25 mg/L and 25 mg/L, respectively. The result indicated that SRB isolated in this study could be used for the bioremediation of acid mine drainage (pH>4) within the heavy metals concentrations tolerance.

Optical absorption and thermoluminescence in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature; Absorcion optica y termoluminiscencia en MgO, MgO:Ni y MgO:Li irradiados a temperatura ambiente

Energy Technology Data Exchange (ETDEWEB)

Delgado, L

1984-07-01

Optical absorption and thermoluminescence (TL) studies in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature are presented. In pure Mg O the thermal annihilation of Fe3+ by recombination with thermally released electrons at {approx} 90 and 175 degree centigree and the V center annealing by hole release up to 100 degree centigree cause the observed glow peaks at these temperatures. The TL excitation spectrum shows two maxima at 245 nm (electron center) and 288 nm (Fe3+). In Mg O:Ni X irradiation induces Fe{sup 2}+ {yields}- Fe{sup 3}+ and Ni{sup 2}+ {yields} Ni{sup 3}+ oxidations. Two TL emission bands centered at 110 degree centigree (red) and 80 o{sup C} (green) are assigned to electron release and their recombination at Fe{sup 3}+ and Ni{sup 3}+ respectively. In Mg O:Li two TL emission bands, one blue (430 nm) and the other red (730 nm) with excitation maxima at 245 nm (electron center) and 200 nm (hole center) respectively are observed. No V-center formation was detected in both Ni and Li doped samples. (Author) 42 refs.

Selenium Speciation in the Fountain Creek Watershed (Colorado, USA Correlates with Water Hardness, Ca and Mg Levels

Directory of Open Access Journals (Sweden)

James S. Carsella

2017-04-01

Full Text Available The environmental levels of selenium (Se are regulated and strictly enforced by the Environmental Protection Agency (EPA because of the toxicity that Se can exert at high levels. However, speciation plays an important role in the overall toxicity of Se, and only when speciation analysis has been conducted will a detailed understanding of the system be possible. In the following, we carried out the speciation analysis of the creek waters in three of the main tributaries—Upper Fountain Creek, Monument Creek and Lower Fountain Creek—located in the Fountain Creek Watershed (Colorado, USA. There are statistically significant differences between the Se, Ca and Mg, levels in each of the tributaries and seasonal swings in Se, Ca and Mg levels have been observed. There are also statistically significant differences between the Se levels when grouped by Pierre Shale type. These factors are considered when determining the forms of Se present and analyzing their chemistry using the reported thermodynamic relationships considering Ca2+, Mg2+, SeO42−, SeO32− and carbonates. This analysis demonstrated that the correlation between Se and water hardness can be explained in terms of formation of soluble CaSeO4. The speciation analysis demonstrated that for the Fountain Creek waters, the Ca2+ ion may be mainly responsible for the observed correlation with the Se level. Considering that the Mg2+ level is also correlating linearly with the Se levels it is important to recognize that without Mg2+ the Ca2+ would be significantly reduced. The major role of Mg2+ is thus to raise the Ca2+ levels despite the equilibria with carbonate and other anions that would otherwise decrease Ca2+ levels.

Solar-blind wurtzite MgZnO alloy films stabilized by Be doping

International Nuclear Information System (INIS)

Su, Longxing; Zhu, Yuan; Zhang, Quanlin; Chen, Mingming; Ji, Xu; Wu, Tianzhun; Gui, Xuchun; Xiang, Rong; Tang, Zikang; Pan, Bicai

2013-01-01

Mg x Zn 1−x O alloy films were deposited on c-plane sapphire substrates by radio frequency plasma-assisted molecular beam epitaxy (rf-PMBE). The phase segregation occurred when x was larger than 33%. Be doping was found experimentally able to stabilize the high-Mg-content MgZnO alloy. By alloying 1–2% Be into MgZnO, the band gap of as-prepared quaternary alloys can be raised to the solar-blind range (4.5 eV). Calculated formation energy of the alloys based on first principle reveals that a small amount of Be incorporation can reduce the formation energy of high-Mg-content MgZnO alloys and results in a more stable system, which justifies our experimental observations. (paper)

Hydrogen incorporation in high hole density GaN:Mg

Science.gov (United States)

Zvanut, M. E.; Uprety, Y.; Dashdorj, J.; Moseley, M.; Doolittle, W. Alan

2011-03-01

We investigate hydrogen passivation in heavily doped p-type GaN using electron paramagnetic resonance (EPR) spectroscopy. Samples include both conventionally grown GaN (1019 cm-3 Mg, 1017 cm-3 holes) and films grown by metal modulation epitaxy (MME), which yielded higher Mg (1- 4 x 1020 cm-3) and hole (1- 40 x 1018 cm-3) densities than found in conventionally grown GaN. The Mg acceptor signal is monitored throughout 30 minute annealing steps in N2 :H2 (92%:7%)) and subsequently pure N2 . N2 :H2 heat treatments of the lower hole density films begin to reduce the Mg EPR intensity at 750 o C, but quench the signal in high hole density films at 600 o C. Revival of the signal by subsequent N2 annealing occurs at 800 o C for the low hole density material and 600 o C in MME GaN. The present work highlights chemical differences between heavily Mg doped and lower doped films; however, it is unclear whether the difference is due to changes in hydrogen-Mg complex formation or hydrogen diffusion. The work at UAB is supported by the NSF.

The role of urban forest to reduce rain acid in urban industrial areas

Science.gov (United States)

Slamet, B.; Agustiarni, Y.; Hidayati; Basyuni, M.

2018-03-01

Urban forest has many functions mainly on improving the quality of the urban environment. One of the functions is to increase pH and reduce dangerous chemical content. The aim of the research is to find out the role of vegetation density of urban forest around the industrial area in reducing the acid rain. The condition of land cover was classified into four classes which are dense, medium, sparse and open area. The water of the throughfall and stemflow was taken from each type of land cover except in the open area. Parameters measured in this study are water acidity (pH), anion content (SO4 2- and NO3 -), cation content (Ca2+, Mg2+, and NH4 +) and electrical conductivity (EC). The results indicated that urban forest vegetation was able to increase the pH of rain water from 5.42 which is in an open area without vegetation to be 7.13 and 7.32 in dense and moderate vegetation cover by throughfall mechanism, respectively. Rain water acidity also decreased through stemflow mechanism with a pH ranged from 5.92 - 6.43. Urban forest vegetation decreased sulfate content (SO42-) from 528.67 mg/l in open area to 44 - 118 mg/l by throughfall mechanism and ranged from 90 to 366.67 mg/l through stemflow mechanism. Urban forest vegetation significantly decreased the rainwater nitrate content from 27 mg/l to 0.03 - 0.70 mg/l through the mechanism of throughfall and between 1.53 - 8.82 mg/l through the stemflow mechanism. Urban forest vegetation also increased the concentration of cations (NH4+, Ca2+, Mg2+, Na+) compared with open areas. Urban forest vegetation showed increased the electrical conductivity (EC) from 208.12 μmhos/cm to 344.67 - 902.17 μmhos/cm through the through fall mechanism and 937.67 - 1058.70 μmhos/cm through the stemflow mechanism. The study suggested that urban forests play a significant role in reducing rainwater acidity and improving the quality of rainwater that reached the soil surface.

Improving significantly the failure strain and work hardening response of LPSO-strengthened Mg-Y-Zn-Al alloy via hot extrusion speed control

Science.gov (United States)

Tan, Xinghe; Chee, Winston; Chan, Jimmy; Kwok, Richard; Gupta, Manoj

2017-07-01

The effect of hot extrusion speed on the microstructure and mechanical properties of MgY1.06Zn0.76Al0.42 (at%) alloy strengthened by the novel long-period stacking ordered (LPSO) phase was systematically investigated. Increase in the speed of extrusion accelerated dynamic recrystallization of α-Mg via particle-stimulated nucleation and grain growth in the alloy. The intensive recrystallization and grain growth events weakened the conventional basal texture and Hall-Petch strengthening in the alloy which led to significant improvement in its failure strain from 4.9% to 19.6%. The critical strengthening contribution from LPSO phase known for attributing high strength to the alloy was observed to be greatly undermined by the parallel competition from texture weakening and the adverse Hall-Petch effect when the alloy was extruded at higher speed. Absence of work hardening interestingly observed in the alloy extruded at lower speed was discussed in terms of its ultra-fine grained microstructure which promoted the condition of steady-state defect density in the alloy; where dislocation annihilation balances out the generation of new dislocations during plastic deformation. One approach to improve work hardening response of the alloy to prevent unstable deformation and abrupt failure in service is to increase the grain diameter in the alloy by judiciously increasing the extrusion speed.

Short-Term Therapy with High Dose Atorvastatin in Patients with Coronary Artery Disease Can Reduce Inflammatory Process

Directory of Open Access Journals (Sweden)

Vida Nesar Hossein

2010-08-01

Full Text Available Coronary heart disease is the leading cause of death and disability in adults. The association between acute coronary syndrom (ACS and elevated serum high sensitivity c-reactive protein (hsCRP suggests that chronic inflammation of the coronary arterial wall may play an important role. A number of drugs used in the treatment of cardiovascular disease reduce serum CRP. It* is therefore possible that reduced inflammation contributes to the beneficial effects of these medications. This was a double blind randomized clinical trial on 52 patients were admitted because of ACS at the Mazandaran Heart Center, Iran in 2007. The patients were divided to three randomized groups which received 20, 40, 80* mg Atorvastatin daily for 6 months. At the time of study enrollment and 1, 3 and 6 months after initiation hsCRP were measured. 1 and 3 month after 20mg atorvastatin therapy the median serum concentration of hsCRP did not decrease significantly, but at the end of 6th month it was* significant difference. At 40mg dosage from 3th month to 6th month versus 1st month to 3th month it was significant decrease, at the end of 1th month and 3rd month it was not significant. At 80mg dose at the end of 1th month it was not significant but at the* end of 3th month and end of 6th month it was significant. Intensive lipid-lowering therapy with high-dose atorvastatin therapy relative to moderate lipid-lowering therapy with low-dose atorvastatin reduces hsCRP better. We found that treatment with greater dose of atorvastatin might decrease greater in plasma level of hsCRP.

Mg II Line Variation of 32 Cygni

Directory of Open Access Journals (Sweden)

Young Woon Kang

1992-12-01

Full Text Available The Mg II lines have been extracted from the IUE archival spectra of 32 Cygni to investigate the effect of the atmospheric eclipse. The UV light curve has been reduced from the continuum flux at the center wavelength of 2807.5 Å in the IUE spectra. The equivalent width of the Mg II k absoption line has been measured for each spectra. The results of the light variation and flux tracing of the absorption line at the vicinity of the primary eclipse confirmed the atmospheric eclipse. The atmospheric effect lasted until the phase 0.06 in the absorptin line tracing, while it lasted until the phase 0.02 in the UV light curve, respectively.

Modeling and stabilities of Mg/MgH2 interfaces: A first-principles investigation

Directory of Open Access Journals (Sweden)

Jia-Jun Tang

2014-07-01

Full Text Available We have theoretically investigated the modeling and the structural stabilities of various Mg/MgH2 interfaces, i.e. Mg(101¯0/MgH2(210, Mg(0001/MgH2(101 and Mg(101¯0/MgH2(101, and provided illuminating insights into Mg/MgH2 interface. Specifically, the main factors, which impact the interfacial energies, are fully considered, including surface energies of two phases, mutual lattice constants of interface model, and relative position of two phases. The surface energies of Mg and MgH2, on the one hand, are found to be greatly impacting the interfacial energies, reflected by the lowest interfacial energy of Mg(0001/MgH2(101 which is comprised of two lowest energy surfaces. On the other hand, it is demonstrated that the mutual lattice constants and the relative position of two phases lead to variations of interfacial energies, thus influencing the interface stabilities dramatically. Moreover, the Mg-H bonding at interface is found to be the determinant of Mg/MgH2 interface stability. Lastly, interfacial and strain effects on defect formations are also studied, both of which are highly facilitating the defect formations. Our results provide a detailed insight into Mg/MgH2 interface structures and the corresponding stabilities.

Laser cladding of a Mg based Mg–Gd–Y–Zr alloy with Al–Si powders

Energy Technology Data Exchange (ETDEWEB)

Chen, Erlei [School of Materials Engineering, Shanghai University of Engineering Science, Shanghai 201620 (China); Zhang, Kemin, E-mail: zhangkm@sues.edu.cn [School of Materials Engineering, Shanghai University of Engineering Science, Shanghai 201620 (China); Zou, Jianxin [National Engineering Research Center of Light Alloys Net Forming & School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China)

2016-03-30

Graphical abstract: A Mg based Mg–Gd–Y–Zr alloy was treated by laser cladding with Al–Si powders at different laser scanning speeds. The laser clad layer mainly contains Mg{sub 2}Si, Mg{sub 17}Al{sub 12} and Al{sub 2}(Gd,Y) phases distributed in the Mg matrix. After laser cladding, the corrosion resistance of the Mg alloy was significantly improved together with increased microhardness in the laser clad layers. - Highlights: • A Mg based Mg–Gd–Y–Zr alloy was laser clad with Al–Si powders. • The microstructure and morphology vary with the depth of the clad layer and the laser scanning speed. • Hardness and corrosion resistance were significantly improved after laser cladding. - Abstract: In the present work, a Mg based Mg–Gd–Y–Zr alloy was subjected to laser cladding with Al–Si powders at different laser scanning speeds in order to improve its surface properties. It is observed that the laser clad layer mainly contains Mg{sub 2}Si, Mg{sub 17}Al{sub 12} and Al{sub 2}(Gd,Y) phases distributed in the Mg matrix. The depth of the laser clad layer increases with decreasing the scanning speed. The clad layer has graded microstructures and compositions. Both the volume fraction and size of Mg{sub 2}Si, Mg{sub 17}Al{sub 12} and Al{sub 2}(Gd,Y) phases decreases with the increasing depth. Due to the formation of these hardening phases, the hardness of clad layer reached a maximum value of HV440 when the laser scanning speed is 2 mm/s, more than 5 times of the substrate (HV75). Besides, the corrosion properties of the untreated and laser treated samples were all measured in a NaCl (3.5 wt.%) aqueous solution. The corrosion potential was increased from −1.77 V for the untreated alloy to −1.13 V for the laser clad alloy with scanning rate of 2 mm/s, while the corrosion current density was reduced from 2.10 × 10{sup −5} A cm{sup −2} to 1.64 × 10{sup −6} A cm{sup −2}. The results show that laser cladding is an efficient method to improve

Large enhancement of Blocking temperature by control of interfacial structures in Pt/NiFe/IrMn/MgO/Pt multilayers

Directory of Open Access Journals (Sweden)

Xi Chen

2015-09-01

Full Text Available The Blocking temperature (TB of Pt/NiFe/IrMn/MgO/Pt multilayers was greatly enhanced from far below room temperature (RT to above RT by inserting 1 nm thick Mg layer at IrMn/MgO interface. Furthermore, the exchange bias field (Heb was increased as well by the control of interfacial structures. The evidence for a significant fraction of Mn-O bonding at IrMn/MgO interface without Mg insertion layer was provided by X-ray photoelectron spectroscopy. The bonding between Mn and O can decrease the antiferromagnetism of IrMn film, leading to lower value of TB in Pt/NiFe/IrMn/MgO/Pt multilayers. Ultrathin Mg film inserted at IrMn/MgO interface acting as an oxygen sinking layer can suppress the oxidation reactions between Mn and O and reduce the formation of Mn-O bonding greatly. The oxidation suppression results in the recovery of the antiferromagnetism of IrMn film, which can enhance TB and Heb. Furthermore, the high resolution transmission electron microscopy demonstrates that the Mg insertion layer can efficiently promote a high-quality MgO (200 texture. This study will enhance the understanding of physics in antiferromagnet-based spintronic devices.

Pinning in high performance MgB{sub 2} thin films and bulks: Role of Mg-B-O nano-scale inhomogeneities

Energy Technology Data Exchange (ETDEWEB)

Prikhna, Tatiana, E-mail: prikhna@mail.ru [Institute for Superhard Materials of the National Academy of Sciences of Ukraine , 2, Avtozavodskaya Str. , Kiev 07074 (Ukraine); Shapovalov, Andrey [Institute for Superhard Materials of the National Academy of Sciences of Ukraine , 2, Avtozavodskaya Str. , Kiev 07074 (Ukraine); Eisterer, Michael [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Vienna (Austria); Shaternik, Vladimir [G.V. Kurdyumov Institute for Metal Physics of the National Academy of Sciences of Ukraine, 36 Academician Vernadsky blvd., Kiev, 03680 (Ukraine); Goldacker, Wilfried [Karlsruhe Institute of Technology (KIT), 76344 Eggenstein (Germany); Weber, Harald W. [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Vienna (Austria); Moshchil, Viktor; Kozyrev, Artem; Sverdun, Vladimir [Institute for Superhard Materials of the National Academy of Sciences of Ukraine , 2, Avtozavodskaya Str. , Kiev 07074 (Ukraine); Boutko, Viktor [Donetsk Institute for Physics and Engineering named after O.O. Galkin of the National Academy of Sciences of Ukraine, R. Luxemburg str.72, Donetsk-114, 83114 (Ukraine); Grechnev, Gennadiy [B. Verkin Institute for Low Temperature Physics of the National Academy of Sciences of Ukraine, 47, Prospekt Nauky, Kharkiv 61103 (Ukraine); Gusev, Alexandr [Donetsk Institute for Physics and Engineering named after O.O. Galkin of the National Academy of Sciences of Ukraine, R. Luxemburg str.72, Donetsk-114, 83114 (Ukraine); Kovylaev, Valeriy; Shaternik, Anton [Institute for Superhard Materials of the National Academy of Sciences of Ukraine , 2, Avtozavodskaya Str. , Kiev 07074 (Ukraine)

2017-02-15

Highlights: • Pinning in MgB{sub 2} depends on the Mg-B-O nano-scaled inhomogeneities. • Finer oxygen-enriched inhomogeneities is the reason of the higher J{sub c} in MgB{sub 2} thin films as compared to bulk. • The results of DOS calculations for MgB{sub 2-x}O{sub x} compounds demonstrate that they have metal-like behavior. • Ordered oxygen distribution in MgB{sub 2} (in pairs or zigzags) reduces binding energy. - Abstract: The comparison of nano-crystalline MgB{sub 2} oxygen-containing thin film (140 nm) and highly dense bulk materials showed that the critical current density, J{sub c}, depends on the distribution of Mg-B-O nano-scale inhomogeneities. It has been shown that MgB{sub 2} bulks with high J{sub c} in low (∼10{sup 6} A/cm{sup 2} in 0-1 T at 10 K) and medium magnetic fields contain MgB{sub 0.6-0.8}O{sub 0.8-0.9} nano-inclusions, where δT{sub c} or a combined δT{sub c} (dominant) / δ{sub l} pinning mechanism prevails, while in bulk MgB{sub 2} with high J{sub c} in high magnetic fields (B{sub irr}(18.5 K) = 15 T, B{sub c2}(0 K) = 42.1 T) MgB{sub 1.2-2.7}O{sub 1.8-2.5} nano-layers are present and δ{sub l} pinning prevails. The structure of oxygen-containing films with high J{sub c} in low and high magnetic fields (J{sub c} (0 T) = 1.8 × 10{sup 7} A/cm{sup 2} and J{sub c} (5 T) = 2 × 10{sup 6} A/cm{sup 2} at 10 K) contains very fine oxygen-enriched Mg-B-O inhomogeneities and δ{sub l} pinning is realized. The results of DOS calculations in MgB{sub 2-x}O{sub x} cells for x = 0, 0.125, 0.25, 0.5, 1 demonstrate that all compounds are conductors with metal-like behaviour. In the case of ordered oxygen substitution for boron the binding energy, E{sub b}, does not increase sufficiently as compared with that for MgB{sub 2}, while when oxygen atoms form zigzag chains the calculated E{sub b} is even lower (E{sub b} = −1.15712 Ry).

Rice Bran Extract Reduces the Risk of Atherosclerosis in Post-Menopausal Vietnamese Women.

Science.gov (United States)

Nhung, Bui Thi; Tuyen, Le Danh; Linh, Vu Anh; Anh, Nguyen Do Van; Nga, Tran Thuy; Thuc, Vu Thi Minh; Yui, Kei; Ito, Yukihiko; Nakashima, Yuri; Yamamoto, Shigeru

2016-01-01

We investigated whether pre-germinated brown rice bran extract containing acylated steryl glucosides (PSG) reduces the risk of atherosclerosis in post-menopausal Vietnamese women. A total of 60 post-menopausal Vietnamese women (45-65 y old) with high LDL cholesterol levels (over 140 mg/dL) were randomly divided into PSG (n=30) and placebo (n=30) groups. The subjects in the PSG group were assigned a daily intake of 6 capsules containing 50 mg PSG, and the subjects in the placebo group were assigned a daily intake of 6 capsules containing corn oil for 6 mo. Before baseline and after month 2, month 4, and month 6 of the intervention, we conducted anthropometric measurements, blood biochemical examinations, a nutrition survey, and physical activity, flow-mediated dilation (FMD), and cardio-ankle vascular index (CAVI) measurements. Serum LDL cholesterol concentrations were significantly reduced from 163.6±25.3 (mg/dL) to 135.9±26.8 (mg/dL) compared to the placebo group (pVietnamese women with high LDL cholesterol.

Interaction of hydrogen with an Mg-Al alloy

International Nuclear Information System (INIS)

Andreasen, A.; Sorensen, M.B.; Burkarl, R.; Moller, B.; Molenbroek, A.M.; Pedersen, A.S.; Andreasen, J.W.; Nielsen, M.M.; Jensen, T.R.

2005-01-01

The interaction of hydrogen with an Mg-Al alloy pre-exposed to air have been studied with in situ time resolved X-ray powder diffraction. Phase fractions as a function of time are derived from series of consecutive diffraction patterns allowing kinetic analysis. The apparent activation energy for dehydrogenation of the Mg-Al alloy is found to be 160 kJ/mol. This is not significantly higher than for pure and fully activated Mg. It is suggested that the addition of Al improves the resistance towards oxygen contamination

Enhanced biocorrosion resistance and biocompatibility of degradable Mg-Nd-Zn-Zr alloy by brushite coating.

Science.gov (United States)

Niu, Jialin; Yuan, Guangyin; Liao, Yi; Mao, Lin; Zhang, Jian; Wang, Yongping; Huang, Feng; Jiang, Yao; He, Yaohua; Ding, Wenjiang

2013-12-01

To further improve the corrosion resistance and biocompatibility of Mg-Nd-Zn-Zr alloy (JDBM), a biodegradable calcium phosphate coating (Ca-P coating) with high bonding strength was developed using a novel chemical deposition method. The main composition of the Ca-P coating was brushite (CaHPO4·2H2O). The bonding strength between the coating and the JDBM substrate was measured to be over 10 MPa, and the thickness of the coating layer was about 10-30 μm. The in vitro corrosion tests indicated that the Ca-P treatment improved the corrosion resistance of JDBM alloy in Hank's solution. Ca-P treatment significantly reduced the hemolysis rate of JDBM alloy from 48% to 0.68%, and induced no toxicity to MC3T3-E1 cells. The in vivo implantation experiment in New Zealand's rabbit tibia showed that the degradation rate was reduced obviously by the Ca-P treatment and less gas was produced from Ca-P treated JDBM bone plates and screws in early stage of the implantation, and at least 10weeks degradation time can be prolonged by the present coating techniques. Both Ca-P treated and untreated JDBM Mg alloy induced bone growth. The primary results indicate that the present Ca-P treatment is a promising technique for the degradable Mg-based biomaterials for orthopedic applications. © 2013.

Characterization of Mg-containing hydroxyapatites synthesized by combustion method

Science.gov (United States)

Kaygili, Omer; Keser, Serhat; Bulut, Niyazi; Ates, Tankut

2018-05-01

In the present paper, Mg-substituted hydroxyapatites with the morphology, composed of the stacked plate- and rod-like structures, were prepared at the temperature of 600 °C by combustion method using glycerine as a fuel. A significant decrease in the crystallite size values calculated for both Scherrer and Williamson-Hall methods is found. The crystallinity, lattice parameter of a, stress and anisotropic energy density values decreased by adding of Mg, whereas the lattice strain increased. The amount of HAp phase decreases with increasing amount of Mg and the β-tricalcium phosphate content increases. Mg incorporation the apatitic structure was detected. Depending on the increase in Mg content, Ca-deficiency was observed.

Conductivity, XRD, and FTIR studies of New Mg2+-ion-conducting solid polymer electrolytes: [PEG: Mg(CH3COO)2

International Nuclear Information System (INIS)

Polu, Anji Reddy; Kumar, Ranveer; Causin, Valerio; Neppalli, Ramesh

2011-01-01

Solid polymer electrolytes based on poly (ethylene glycol) (PEG) doped with Mg(CH 3 COO) 2 have been prepared by using the solution-casting method. The X-ray diffraction patterns of PEG with Mg(CH 3 COO) 2 salt indicated a decrease in the degree of crystallinity with increasing concentration of the salt. The complexation of Mg(CH 3 COO) 2 salt with the polymer was confirmed by using Fourier transform infrared spectroscopy (FTIR) studies. The ionic conductivity was measured for the [PEG: Mg(CH 3 COO) 2 ] system in the frequency range 50 Hz - 1 MHz. The addition of Mg salt was found to improve the ionic conductivity significantly. The 15-wt-% Mg(CH 3 COO) 2 -doped system had a maximum conductivity of 1.07 x 10 -6 S/cm at 303 K. The conductance spectrum shows two distinct regions: a dc plateau and a dispersive region. The temperature dependence of the ionic conductivity reveals the conduction mechanism to be an Arrhenius-type thermally activated process.

Protective effect of tea polyphenols against paracetamol-induced hepatotoxicity in mice is significantly correlated with cytochrome P450 suppression.

Science.gov (United States)

Chen, Xia; Sun, Chang-Kai; Han, Guo-Zhu; Peng, Jin-Yong; Li, Ying; Liu, Yan-Xia; Lv, Yuan-Yuan; Liu, Ke-Xin; Zhou, Qin; Sun, Hui-Jun

2009-04-21

To investigate the hepatoprotective activity of tea polyphenols (TP) and its relation with cytochrome P450 (CYP450) expression in mice. Hepatic CYP450 and CYPb(5) levels were measured by UV-spectrophotometry in mice 2 d after intraperitoneal TP (25, 50 and 100 mg/kg per day). Then the mice were intragastricly pre-treated with TP (100, 200 and 400 mg/kg per day) for six days before paracetamol (1000 mg/kg) was given. Their acute mortality was compared with that of control mice. The mice were pre-treated with TP (100, 200, and 400 mg/kg per day) for five days before paracetamol (500 mg/kg) was given. Hepatic CYP2E1 and CYP1A2 protein and mRNA expression levels were evaluated by Western blotting, immunohistochemical staining and transcriptase-polymerase chain reaction. The hepatic CYP450 and CYPb(5) levels in mice of TP-treated groups (100, 200 and 400 mg/kg per day) were decreased in a dose-dependent manner compared with those in the negative control mice. TP significantly attenuated the paracetamol-induced hepatic injury and dramatically reduced the mortality of paracetamol-treated mice. Furthermore, TP reduced CYP2E1 and CYP1A2 expression at both protein and mRNA levels in a dose-dependent manner. TP possess potential hepatoprotective properties and can suppress CYP450 expression.

Reduced-Concentration Clavulanate for Young Children with Acute Otitis Media

Science.gov (United States)

Paradise, Jack L.; Rockette, Howard E.; Jeong, Jong-Hyeon; Kearney, Diana H.; Bhatnagar, Sonika; Shope, Timothy R.; Muñiz, Gysella; Martin, Judith M.; Kurs-Lasky, Marcia; Haralam, MaryAnn; Pope, Marcia A.; Nagg, Jennifer P.; Zhao, Wenchen; Miah, Mohammad Kowser; Beumer, Jan; Venkataramanan, Raman; Shaikh, Nader

2017-01-01

ABSTRACT Amoxicillin-clavulanate (A/C) is currently the most effective oral antimicrobial in treating children with acute otitis media (AOM), but the standard dosage of 90 mg amoxicillin/6.4 mg clavulanate/kg of body weight/day commonly causes diarrhea. We examined whether an A/C formulation containing lower concentrations of clavulanate would result in less diarrhea while maintaining plasma levels of amoxicillin and clavulanate adequate to eradicate middle-ear pathogens and to achieve clinical success. We conducted an open-label study in children with AOM who were 6 to 23 months of age. In phase 1, we treated 40 children with a reduced-clavulanate A/C formulation providing 90 mg amoxicillin/3.2 mg clavulanate/kg/day for 10 days. In phase 2, we treated 72 children with the same formulation at a dosage of 80 mg amoxicillin/2.85 mg clavulanate/kg/day for 10 days. We compared the rates of protocol-defined diarrhea (PDD), diaper dermatitis, and AOM clinical response in these children with rates we had reported in children who received the standard A/C regimen, and we obtained plasma levels of amoxicillin and clavulanate at various time points. Outcomes in phase 1 children and in children who had received the standard regimen did not differ significantly. Rates of PDD in children receiving phase 2 and standard regimens were 17% and 26%, respectively (P = 0.10). The corresponding rates of diaper dermatitis were 21% and 33% (P = 0.04) and of AOM treatment failure were 12% and 16% (P = 0.44). Symptomatic responses did not differ significantly between regimens; both gave clavulanate levels sufficient to inhibit β-lactamase activity. In young children with AOM, clavulanate dosages lower than those currently used may be associated with fewer side effects without reducing clinical efficacy. (This study has been registered at ClinicalTrials.gov under registration no. NCT02630992.) PMID:28438923

Reduced-Concentration Clavulanate for Young Children with Acute Otitis Media.

Science.gov (United States)

Hoberman, Alejandro; Paradise, Jack L; Rockette, Howard E; Jeong, Jong-Hyeon; Kearney, Diana H; Bhatnagar, Sonika; Shope, Timothy R; Muñiz, Gysella; Martin, Judith M; Kurs-Lasky, Marcia; Haralam, MaryAnn; Pope, Marcia A; Nagg, Jennifer P; Zhao, Wenchen; Miah, Mohammad Kowser; Beumer, Jan; Venkataramanan, Raman; Shaikh, Nader

2017-07-01

Amoxicillin-clavulanate (A/C) is currently the most effective oral antimicrobial in treating children with acute otitis media (AOM), but the standard dosage of 90 mg amoxicillin/6.4 mg clavulanate/kg of body weight/day commonly causes diarrhea. We examined whether an A/C formulation containing lower concentrations of clavulanate would result in less diarrhea while maintaining plasma levels of amoxicillin and clavulanate adequate to eradicate middle-ear pathogens and to achieve clinical success. We conducted an open-label study in children with AOM who were 6 to 23 months of age. In phase 1, we treated 40 children with a reduced-clavulanate A/C formulation providing 90 mg amoxicillin/3.2 mg clavulanate/kg/day for 10 days. In phase 2, we treated 72 children with the same formulation at a dosage of 80 mg amoxicillin/2.85 mg clavulanate/kg/day for 10 days. We compared the rates of protocol-defined diarrhea (PDD), diaper dermatitis, and AOM clinical response in these children with rates we had reported in children who received the standard A/C regimen, and we obtained plasma levels of amoxicillin and clavulanate at various time points. Outcomes in phase 1 children and in children who had received the standard regimen did not differ significantly. Rates of PDD in children receiving phase 2 and standard regimens were 17% and 26%, respectively ( P = 0.10). The corresponding rates of diaper dermatitis were 21% and 33% ( P = 0.04) and of AOM treatment failure were 12% and 16% ( P = 0.44). Symptomatic responses did not differ significantly between regimens; both gave clavulanate levels sufficient to inhibit β-lactamase activity. In young children with AOM, clavulanate dosages lower than those currently used may be associated with fewer side effects without reducing clinical efficacy. (This study has been registered at ClinicalTrials.gov under registration no. NCT02630992.). Copyright © 2017 American Society for Microbiology.

Inhibition of cathepsin K reduces cartilage degeneration in the anterior cruciate ligament transection rabbit and murine models of osteoarthritis.

Science.gov (United States)

Hayami, Tadashi; Zhuo, Ya; Wesolowski, Gregg A; Pickarski, Maureen; Duong, Le T

2012-06-01

To investigate the disease modifying effects of cathepsin K (CatK) inhibitor L-006235 compared to alendronate (ALN) in two preclinical models of osteoarthritis (OA). Skeletally mature rabbits underwent sham or anterior cruciate ligament transection (ACLT)-surgery and were treated with L-006235 (L-235, 10 mg/kg or 50 mg/kg, p.o., daily) or ALN (0.6 mg/kg, s.c., weekly) for 8-weeks. ACLT joint instability was also induced in CatK(-/-) versus wild type (wt) mice and treated for 16-weeks. Changes in cartilage degeneration, subchondral bone volume and osteophyte area were determined by histology and μ-CT. Collagen type I helical peptide (HP-I), a bone resorption marker and collagen type II C-telopeptide (CTX-II), a cartilage degradation marker were measured. L-235 (50 mg/kg) and ALN treatment resulted in significant chondroprotective effects, reducing CTX-II by 60% and the histological Mankin score for cartilage damage by 46% in the ACLT-rabbits. Both doses of L-235 were more potent than ALN in protecting against focal subchondral bone loss, and reducing HP-I by 70% compared to vehicle. L-235 (50 mg/kg) and ALN significantly reduced osteophyte formation in histomorphometric analysis by 55%. The Mankin score in ACLT-CatK(-/-) mice was ~2.5-fold lower than the ACLT-wt mice and was not different from sham-CatK(-/-). Osteophyte development was not different among the groups. Inhibition of CatK provides significant benefits in ACLT-model of OA, including: 1) protection of subchondral bone integrity, 2) protection against cartilage degradation and 3) reduced osteophytosis. Preclinical evidence supports the role of CatK as a potential therapeutic target for the treatment of OA. Copyright © 2012 Elsevier Inc. All rights reserved.

Mg Incorporation Efficiency in Pulsed MOCVD of N-Polar GaN:Mg

Science.gov (United States)

Marini, Jonathan; Mahaboob, Isra; Hogan, Kasey; Novak, Steve; Bell, L. D.; Shahedipour-Sandvik, F.

2017-10-01

We report on the effect of growth polarity and pulsed or δ -doped growth mode on impurity incorporation in metalorganic chemical vapor deposition-grown GaN. In Ga-polar orientation, up to 12× enhancement in Mg concentration for given Mg flow rate is observed, resulting in enhanced p-type conductivity for these samples. In contrast, this enhancement effect is greatly diminished for N-polar samples, falling off with increasing Mg flow and showing maximum enhancement of 2.7× at 30 nmol/min Mg flow. At higher Mg flow rates, Mg incorporation at normal levels did not correspond to p-type conductivity, which may be due to Mg incorporation at nonacceptor sites. Concentrations of C, O, and Si were also investigated, revealing dependence on Mg flow in N-polar pulsed samples. Carbon incorporation was found to decrease with increasing Mg flow, and oxygen incorporation was found to remain high across varied Mg flow. These effects combine to result in N-polar samples that are not p-type when using the pulsed growth mode.

Predictive calculation of phase formation in Al-rich Al-Zn-Mg-Cu-Sc-Zr alloys using a thermodynamic Mg-alloy database

International Nuclear Information System (INIS)

Groebner, J.; Rokhlin, L.L.; Dobatkina, T.V.; Schmid-Fetzer, R.

2007-01-01

Three series of Al-rich alloys in the system Al-Zn-Mg-Cu-Sc-Zr and the subsystems Al-Zn-Mg-Cu-Sc and Al-Zn-Mg-Sc were studied by thermodynamic calculations. Phase formation was compared with experimental data obtained by DTA and microstructural analysis. Calculated phase diagrams, phase amount charts and enthalpy charts together with non-equilibrium calculations under Scheil conditions reveal significant details of the complex phase formation. This enables consistent and correct interpretation of thermal analysis data. Especially the interpretation of liquidus temperature and primary phase is prone to be wrong without using this tool of computational thermodynamics. All data are predictions from a thermodynamic database developed for Mg-alloys and not a specialized Al-alloy database. That provides support for a reasonable application of this database for advanced Mg-alloys beyond the conventional composition ranges

Predictive calculation of phase formation in Al-rich Al-Zn-Mg-Cu-Sc-Zr alloys using a thermodynamic Mg-alloy database

Energy Technology Data Exchange (ETDEWEB)

Groebner, J. [Institute of Metallurgy, Clausthal University of Technology, Robert-Koch Strasse 42, D-38678 Clausthal-Zellerfeld (Germany); Rokhlin, L.L. [Baikov Institute of Metallurgy and Materials Science, Leninsky prosp. 49, 119991 GSP-1, Moscow (Russian Federation); Dobatkina, T.V. [Baikov Institute of Metallurgy and Materials Science, Leninsky prosp. 49, 119991 GSP-1, Moscow (Russian Federation); Schmid-Fetzer, R. [Institute of Metallurgy, Clausthal University of Technology, Robert-Koch Strasse 42, D-38678 Clausthal-Zellerfeld (Germany)]. E-mail: schmid-fetzer@tu-clausthal.de

2007-05-16

Three series of Al-rich alloys in the system Al-Zn-Mg-Cu-Sc-Zr and the subsystems Al-Zn-Mg-Cu-Sc and Al-Zn-Mg-Sc were studied by thermodynamic calculations. Phase formation was compared with experimental data obtained by DTA and microstructural analysis. Calculated phase diagrams, phase amount charts and enthalpy charts together with non-equilibrium calculations under Scheil conditions reveal significant details of the complex phase formation. This enables consistent and correct interpretation of thermal analysis data. Especially the interpretation of liquidus temperature and primary phase is prone to be wrong without using this tool of computational thermodynamics. All data are predictions from a thermodynamic database developed for Mg-alloys and not a specialized Al-alloy database. That provides support for a reasonable application of this database for advanced Mg-alloys beyond the conventional composition ranges.

Soluble salts addition modifies MgO hydration

International Nuclear Information System (INIS)

Santos, A.M.; Pandolfelli, V.C.; Salomao, R.

2012-01-01

Magnesium oxide (MgO) show great technological interest on refractories due to its high refractoriness, basic slag corrosion resistance and competitive cost. However, the hydration reaction of MgO produces magnesium hydroxide. This reaction generates a significant volumetric expansion that can lead to material breakdown inhibiting its use in refractory castables. This reaction can be affected by several factors such as magnesia source, purity, calcination temperature, pH, CaO/SiO 2 ratio and agitation speed. In the present work, soluble salts (CaCl 2 and MgCl 2 ) were used in MgO aqueous suspensions (caustic and sinter). The results were evaluated by means of techniques of degree of hydration (termogravimetric), Scanning electron microscopy, apparent volumetric expansion and x-ray Diffraction which showed that the degree of hydration was noticeably less to sinter aqueous and the expansive effects were less with the addition of CaCl 2 . (author)

Influence of the core-hole effect on optical properties of magnesium oxide (MgO) near the Mg L-edge region.

Science.gov (United States)

Sinha, Mangalika; Modi, Mohammed H; Ghosh, Haranath; Yadav, P K; Gupta, R K

2018-05-01

The influence of the core-hole effect on optical properties of magnesium oxide (MgO) is established through experimental determination of optical constants and first-principles density functional theory studies. Optical constants (δ and β) of MgO thin film are measured in the spectral region 40-300 eV using reflectance spectroscopy techniques at the Indus-1 synchrotron radiation source. The obtained optical constants show strong core exciton features near the Mg L-edge region, causing significant mismatch with Henke's tabulated values. On comparing the experimentally obtained optical constants with Henke's tabulated values, an edge shift of ∼3.0 eV is also observed. Distinct evidence of effects of core exciton on optical constants (δ and β) in the near Mg L-edge absorption spectra are confirmed through first-principles simulations.

Intramedullary Mg2Ag nails augment callus formation during fracture healing in mice.

Science.gov (United States)

Jähn, Katharina; Saito, Hiroaki; Taipaleenmäki, Hanna; Gasser, Andreas; Hort, Norbert; Feyerabend, Frank; Schlüter, Hartmut; Rueger, Johannes M; Lehmann, Wolfgang; Willumeit-Römer, Regine; Hesse, Eric

2016-05-01

causing adverse effects. Importantly, radiographs, μCT and bone histomorphometry revealed a significant increase in callus size due to an augmented bone formation rate and a reduced bone resorption in fractures supported by Mg2Ag nails, thereby improving bone healing. Thus, intramedullary Mg2Ag nails are promising biomaterials for fracture healing to circumvent implant removal. Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Low-temperature synthesis of MgB{sub 2} via powder metallurgy processing

Energy Technology Data Exchange (ETDEWEB)

Birol, Yucel [Dokuz Eylul University, Department of Metallurgical and Materials Engineering, Faculty of Engineering, Buca, Izmir (Turkey)

2016-12-15

Ball-milled Mg/B{sub 2}O{sub 3} powder blends reveal interpenetrating layers of deformed magnesium and boron oxide grains that are increasingly refined with increasing milling time. Boron oxide is reduced by Mg and MgO thus formed reacts with the remaining B{sub 2}O{sub 3} to produce Mg{sub 3}(BO{sub 3}){sub 2} during ball milling for 30 min. Both B{sub 2}O{sub 3} and Mg{sub 3}(BO{sub 3}){sub 2} react with Mg to produce MgB{sub 2} upon further ball milling. An annealing treatment can be employed when ball milling is performed for less than 1 h as thermal exposure of the ball-milled Mg/B{sub 2}O{sub 3} powder blends also leads to the formation of MgB{sub 2}. The above reactions take place between 500 and 700 C when the Mg/B{sub 2}O{sub 3} powder blend is ball milled for 30 min, and between 450 and 550 C, after ball milling for 1 h. This is a very attractive route owing to processing temperatures where the volatility of Mg is no longer a problem. (orig.)

Ranitidine reduced levodopa-induced dyskinesia in a rat model of Parkinson’s disease

Directory of Open Access Journals (Sweden)

Cui G

2013-12-01

Full Text Available Guiyun Cui,1,* Xinxin Yang,1,* Xiaoying Wang,2,* Zunsheng Zhang,1 Xuanye Yue,1 Hongjuan Shi,1 Xia Shen11Department of Neurology, 2Department of Ultrasound, the Affiliated Hospital of Xuzhou Medical College, Jiangsu, People’s Republic of China *These authors contributed equally to this workBackground: Chronic administration of levodopa in Parkinson’s disease leads to debilitating involuntary movements, termed levodopa-induced dyskinesia (LID. The pathogenesis of LID is poorly understood. Previous research has shown that histamine H2 receptors are highly expressed in the input (striatum and output (globus pallidus, substantia nigra regions of the basal ganglia, particularly in the GABAergic striatopallidal and striatonigral pathways. Therefore, a histamine H2 receptor antagonist could be used to reduce LID. In the present work, we investigated whether ranitidine has the potential to diminish LID in rats with dyskinesia and explored the underlying mechanisms involved.Methods: A rat model of PD was induced by 6-hydroxydopamine. Valid PD rats were then treated with levodopa (25 mg/kg, intraperitoneally and benserazide (12.5 mg/kg, intraperitoneally for 21 days to induce a rat model of LID. The acute and chronic effects of administration of ranitidine at different doses (5 mg/kg, 10 mg/kg, and 20 mg/kg on abnormal involuntary movements, levodopa-induced rotations, and the forelimb adjusting steps test were investigated in LID rats. The chronic effect of ranitidine (10 mg/kg on the expression of Arc and proenkephalin was also evaluated.Results: Levodopa elicited increased dyskinesia in PD rats. Acute ranitidine treatment had no effect on LID, but chronic ranitidine administration (10 mg/kg, 20 mg/kg reduced LID in rats with dyskinesia. Importantly, levodopa-induced rotations were not affected by chronic treatment with ranitidine. In addition, chronic ranitidine (10 mg/kg, 20 mg/kg significantly improved stepping of the lesioned forepaw. Real

Attachment and proliferation of human osteoblast-like cells (MG-63) on laser-ablated titanium implant material

Energy Technology Data Exchange (ETDEWEB)

Györgyey, Ágnes; Ungvári, Krisztina [Department of Oral Biology and Experimental Dental Research, Faculty of Dentistry, University of Szeged, H-6720 Szeged (Hungary); Kecskeméti, Gabriella; Kopniczky, Judit [Department of Optics and Quantum Electronics, Faculty of Science and Informatics, University of Szeged, H-6720 Szeged (Hungary); Hopp, Béla [Research Group on Laser Physics, Hungarian Academy of Sciences and University of Szeged, H-6720 Szeged (Hungary); Oszkó, Albert [Department of Physical Chemistry and Materials Science, Faculty of Science and Informatics, University of Szeged, H-6720 Szeged (Hungary); Pelsöczi, István; Rakonczay, Zoltán [Department of Oral Biology and Experimental Dental Research, Faculty of Dentistry, University of Szeged, H-6720 Szeged (Hungary); Nagy, Katalin [Department of Oral Surgery, Faculty of Dentistry, University of Szeged, H-6720 Szeged (Hungary); Turzó, Kinga, E-mail: kturzo@yahoo.com [Department of Oral Biology and Experimental Dental Research, Faculty of Dentistry, University of Szeged, H-6720 Szeged (Hungary)

2013-10-15

Demand is increasing for shortening the long (3–6 months) osseointegration period to rehabilitate patients' damaged chewing apparatus in as short a time as possible. For dental implants, as for biomaterials in general, the bio- and osseointegration processes can be controlled at molecular and cellular levels by modification of the implant surface. One of the most promising of such surface modifications is laser ablation, as demonstrated by our previous results [46]. Commercially pure (CP4) sand-blasted, acid-etched titanium disks (Denti® System Ltd., Hungary) were irradiated with a KrF excimer laser (248 nm, fluence 0.4 J/cm{sup 2}, FWHM 18 ns, 2000 pulses), or with a Nd:YAG laser (532 nm, 1.3 J/cm{sup 2}, 10 ns, 200 pulses) then examined by SEM, AFM, and XPS. In vitro attachment (24 h) and proliferation (72 h) of MG-63 osteoblast cells were investigated via dimethylthiazol-diphenyl tetrazolium bromide (MTT), alamarBlue (AB) assays alkaline phosphatase quantification (ALP) and SEM. SEM and AFM revealed significant changes in morphology and roughness. XPS confirmed the presence of TiO{sub 2} on each sample; after Nd:YAG treatment a reduced state of Ti (Ti{sup 3+}) was also observed. MTT, AB and ALP measurements detected an increase in the number of cells between the 24- and 72 hour observations; however, laser treatment did not affect cell attachment and proliferation significantly. - Highlights: • CP4 titanium implant surfaces were modified with Nd:YAG and KrF excimer laser. • SEM and AFM revealed significant changes in morphology and roughness. • XPS confirmed the presence of TiO{sub 2} on each sample; after Nd:YAG treatment a reduced state of Ti (Ti{sup 3+}) was found. • Cell proliferation experiments detected an increased number of MG-63 cells between the 24 h and 72 h observations. • Laser treatments neither disturbed, nor enhanced MG-63 cell attachment and proliferation significantly.

Attachment and proliferation of human osteoblast-like cells (MG-63) on laser-ablated titanium implant material

International Nuclear Information System (INIS)

Györgyey, Ágnes; Ungvári, Krisztina; Kecskeméti, Gabriella; Kopniczky, Judit; Hopp, Béla; Oszkó, Albert; Pelsöczi, István; Rakonczay, Zoltán; Nagy, Katalin; Turzó, Kinga

2013-01-01

Demand is increasing for shortening the long (3–6 months) osseointegration period to rehabilitate patients' damaged chewing apparatus in as short a time as possible. For dental implants, as for biomaterials in general, the bio- and osseointegration processes can be controlled at molecular and cellular levels by modification of the implant surface. One of the most promising of such surface modifications is laser ablation, as demonstrated by our previous results [46]. Commercially pure (CP4) sand-blasted, acid-etched titanium disks (Denti® System Ltd., Hungary) were irradiated with a KrF excimer laser (248 nm, fluence 0.4 J/cm 2 , FWHM 18 ns, 2000 pulses), or with a Nd:YAG laser (532 nm, 1.3 J/cm 2 , 10 ns, 200 pulses) then examined by SEM, AFM, and XPS. In vitro attachment (24 h) and proliferation (72 h) of MG-63 osteoblast cells were investigated via dimethylthiazol-diphenyl tetrazolium bromide (MTT), alamarBlue (AB) assays alkaline phosphatase quantification (ALP) and SEM. SEM and AFM revealed significant changes in morphology and roughness. XPS confirmed the presence of TiO 2 on each sample; after Nd:YAG treatment a reduced state of Ti (Ti 3+ ) was also observed. MTT, AB and ALP measurements detected an increase in the number of cells between the 24- and 72 hour observations; however, laser treatment did not affect cell attachment and proliferation significantly. - Highlights: • CP4 titanium implant surfaces were modified with Nd:YAG and KrF excimer laser. • SEM and AFM revealed significant changes in morphology and roughness. • XPS confirmed the presence of TiO 2 on each sample; after Nd:YAG treatment a reduced state of Ti (Ti 3+ ) was found. • Cell proliferation experiments detected an increased number of MG-63 cells between the 24 h and 72 h observations. • Laser treatments neither disturbed, nor enhanced MG-63 cell attachment and proliferation significantly

Effect of Adding Elements on Microstructure of Mg-3Si Alloy

Directory of Open Access Journals (Sweden)

CUI Bin

2017-03-01

Full Text Available The microstructure of alloy Mg-3Si(mass fraction/%, same as below after successive additions with different elements of Zn, Nd, Gd and Y was observed and the microstructure evolution was investigated by scanning electron microscopy and X-ray diffraction. The results show the primary Mg2Si particles co-exist with eutectic Mg2Si particles in binary alloy Mg-Si. With minor addition of Zn element, only primary Mg2Si can be found in ternary Mg-3Si-3Zn system while eutectic Mg2Si particles disappear. In quaternary alloy Mg-2.0Nd-3.0Zn-3.0Si, the addition of Nd element can effectively refine the primary Mg2Si particles and form some Mg41Nd5 particles. After continuous adding of Gd and Y elements into quaternary system, Gd5Si3 and YSi particles increase significantly in the alloy Mg-8.0Gd-4.0Y-2.0Nd-3.0Zn-3.0Si, while volume fraction of primary Mg2Si decrease significantly. Thermo-Calc calculation predicts that the Gibbs free energy for primary particles Gd5Si3, YSi is lower, and therefore Gd, Y atom and Si are more likely to form compounds. In Mg-8Gd-4Y-2Nd-3Zn-3Si alloy, room temperature Gibbs free energy for primary particles Mg2Si, Gd5Si3, YSi is -9.56×104, -8.72×104, -2.83×104J/mol, respectively, and the mass fraction of these particles is 8.07%, 5.27%, 1.40% respectively.

Mg{sub 2}Sn heterostructures on Si(111) substrate

Energy Technology Data Exchange (ETDEWEB)

Dózsa, L., E-mail: dozsa@mfa.kfki.hu [Institute of Technical Physics and Materials Science, Centre for Energy Research, Hungarian Academy of Sciences, 1525 Budapest Pf, 49 (Hungary); Galkin, N.G. [Institute of Automation and Control Processes of FEB RAS, 5 Radio St., Vladivostok 690041 (Russian Federation); Far Eastern Federal University, 8 Sukhanova St., Vladivostok 690950 (Russian Federation); Pécz, B.; Osváth, Z.; Zolnai, Zs. [Institute of Technical Physics and Materials Science, Centre for Energy Research, Hungarian Academy of Sciences, 1525 Budapest Pf, 49 (Hungary); Németh, A. [Wigner Research Centre for Physics, Institute for Particle and Nuclear Physics, 1525 Budapest, P.O.B. 49 (Hungary); Galkin, K.N.; Chernev, I.M. [Institute of Automation and Control Processes of FEB RAS, 5 Radio St., Vladivostok 690041 (Russian Federation); Dotsenko, S.A. [Institute of Automation and Control Processes of FEB RAS, 5 Radio St., Vladivostok 690041 (Russian Federation); Far Eastern Federal University, 8 Sukhanova St., Vladivostok 690950 (Russian Federation)

2017-05-31

Highlights: • Investigations show that the nanostructures have significant changes during the applied regular experimental investigations. • It is especially true for transmittance electron microscopy, where the investigated layers have to be thinned near to the nanostructure size. • The time order of the applied experimental investigation has a dominant effect on the experimetal results. - Abstract: Thin un-doped and Al doped polycrystalline Mg-stannide films consisting mainly of Mg{sub 2}Sn semiconductor phase have been grown by deposition of Sn-Mg multilayers on Si(111) p-type wafers at room temperature and annealing at 150 °C. Rutherford backscattering measurement spectroscopy (RBS) were used to determine the amount of Mg and Sn in the structures. Raman spectroscopy has shown the layers contain Mg{sub 2}Sn phase. Cross sectional transmission electron microscopy (XTEM) measurements have identified Mg{sub 2}Sn nanocrystallites in hexagonal and cubic phases without epitaxial orientation with respect to the Si(111) substrate. Significant oxygen concentration was found in the layer both by RBS and TEM. The electrical measurements have shown laterally homogeneous conductivity in the grown layer. The undoped Mg{sub 2}Sn layers show increasing resistivity with increasing temperature indicating the scattering process dominates the resistance of the layers, i.e. large concentration of point defects was generated in the layer during the growth process. The Al doped layer shows increase of the resistance at low temperature caused by freeze out of free carriers in the Al doped Mg{sub 2}Sn layer. The measurements indicate the necessity of protective layer grown over the Mg{sub 2}Sn layers, and a short time delay between sample preparation and cross sectionalTEM analysis, since the unprotected layer is degraded by the interaction with the ambient.

Intraoperative ketamine reduces immediate postoperative opioid consumption after spinal fusion surgery in chronic pain patients with opioid dependency: a randomized, blinded trial.

Science.gov (United States)

Nielsen, Rikke Vibeke; Fomsgaard, Jonna Storm; Siegel, Hanna; Martusevicius, Robertas; Nikolajsen, Lone; Dahl, Jørgen Berg; Mathiesen, Ole

2017-03-01

Perioperative handling of surgical patients with opioid dependency represents an important clinical problem. Animal studies suggest that ketamine attenuates central sensitization and hyperalgesia and thereby reduces postoperative opioid tolerance. We hypothesized that intraoperative ketamine would reduce immediate postoperative opioid consumption compared with placebo in chronic pain patients with opioid dependency undergoing lumbar spinal fusion surgery. Primary outcome was morphine consumption 0 to 24 hours postoperatively. Secondary outcomes were acute pain at rest and during mobilization 2 to 24 hours postoperatively (visual analogue scale), adverse events, and persistent pain 6 months postoperatively. One hundred fifty patients were randomly assigned to intraoperative S-ketamine bolus 0.5 mg/kg and infusion 0.25 mg·kg·h or placebo. Postoperatively, patients received their usual opioids, paracetamol and IV patient-controlled analgesia with morphine. In the final analyses, 147 patients were included. Patient-controlled analgesia IV morphine consumption 0 to 24 hours postoperatively was significantly reduced in the ketamine group compared with the placebo group: 79 (47) vs 121 (53) mg IV, mean difference 42 mg (95% confidence interval -59 to -25), P ketamine group 6 and 24 hours postoperatively. There were no significant differences regarding acute pain, nausea, vomiting, hallucinations, or nightmares. Back pain at 6 months postoperatively compared with preoperative pain was significantly more improved in the ketamine group compared with the placebo group, P = 0.005. In conclusion, intraoperative ketamine significantly reduced morphine consumption 0 to 24 hours after lumbar fusion surgery in opioid-dependent patients. The trend regarding less persistent pain 6 months postoperatively needs further investigation.

Does chocolate reduce blood pressure? A meta-analysis

Directory of Open Access Journals (Sweden)

Ried Karin

2010-06-01

mg to 1000 mg in the active treatment groups, and interventions ran for 2 to 18 weeks. Meta-regression analysis found study design and type of control to be borderline significant but possibly indirect predictors for blood pressure outcome. Conclusion Our meta-analysis suggests that dark chocolate is superior to placebo in reducing systolic hypertension or diastolic prehypertension. Flavanol-rich chocolate did not significantly reduce mean blood pressure below 140 mmHg systolic or 80 mmHg diastolic.

Preoperative dexamethasone reduces acute but not sustained pain after lumbar disk surgery

DEFF Research Database (Denmark)

Nielsen, Rikke V; Siegel, Hanna; Fomsgaard, Jonna S

2015-01-01

on acute and sustained pain after lumbar disk surgery. In this blinded study, 160 patients undergoing lumbar disk surgery were randomly assigned to 16 mg IV dexamethasone or placebo. All patients received perioperative paracetamol and ibuprofen, and postoperative IV patient-controlled analgesia...... months postoperatively. Acute pain during mobilization (weighted average area under the curve, 2-24 hours) was significantly reduced in the dexamethasone group: 33 (22) mm vs placebo 43 (18) mm, (95% confidence interval [CI] 3-16) P = 0.005. Vomiting 0 to 24 hours postoperatively was reduced....../paralysis of the legs in the dexamethasone and placebo groups, respectively, 3 months postoperatively (P = 0.20). In conclusion, preoperative dexamethasone significantly reduced pain during mobilization and vomiting, after lumbar disk surgery. No significant effects were observed 3 months postoperatively....

Foliar application with nano-silicon reduced cadmium accumulation in grains by inhibiting cadmium translocation in rice plants.

Science.gov (United States)

Chen, Rui; Zhang, Changbo; Zhao, Yanling; Huang, Yongchun; Liu, Zhongqi

2018-01-01

Nano-silicon (Si) may be more effective than regular fertilizers in protecting plants from cadmium (Cd) stress. A field experiment was conducted to study the effects of nano-Si on Cd accumulation in grains and other organs of rice plants (Oryza sativa L. cv. Xiangzaoxian 45) grown in Cd-contaminated farmland. Foliar application with 5~25 mM nano-Si at anthesis stage reduced Cd concentrations in grains and rachises at maturity stage by 31.6~64.9 and 36.1~60.8%, respectively. Meanwhile, nano-Si application significantly increased concentrations of potassium (K), magnesium (Mg), and iron (Fe) in grains and rachises, but imposed little effect on concentrations of calcium (Ca), zinc (Zn), and manganese (Mn) in them. Uppermost nodes under panicles displayed much higher Cd concentration (4.50~5.53 mg kg -1 ) than other aerial organs. After foliar application with nano-Si, translocation factors (TFs) of Cd ions from the uppermost nodes to rachises significantly declined, but TFs of K, Mg, and Fe from the uppermost nodes to rachises increased significantly. High dose of nano-Si (25 mM) was more effective than low dose of nano-Si in reducing TFs of Cd from roots to the uppermost nodes and from the uppermost nodes to rachises. These findings indicate that nano-Si supply reduces Cd accumulation in grains by inhibiting translocation of Cd and, meanwhile, promoting translocation of K, Mg, and Fe from the uppermost nodes to rachises in rice plants.

Molecular cloning, purification, and characterization of a novel polyMG-specific alginate lyase responsible for alginate MG block degradation in Stenotrophomas maltophilia KJ-2

Energy Technology Data Exchange (ETDEWEB)

Lee, Su In; Kim, Hee Sook [Kyungsung Univ., Busan (Korea, Republic of). Dept. of Food Science and Biotechnology; Choi, Sung Hee; Lee, Eun Yeol [Kyung Hee Univ., Gyeonggi-do (Korea, Republic of). Dept. of Chemical Engineering

2012-09-15

A gene for a polyMG-specific alginate lyase possessing a novel structure was identified and cloned from Stenotrophomas maltophilia KJ-2 by using PCR with homologous nucleotide sequences-based primers. The recombinant alginate lyase consisting of 475 amino acids was purified on Ni-Sepharose column and exhibited the highest activity at pH 8 and 40 C. Interestingly, the recombinant alginate lyase was expected to have a similar catalytic active site of chondroitin B lyase but did not show chondroitin lyase activity. In the test of substrate specificity, the recombinant alginate lyase preferentially degraded the glycosidic bond of polyMG-block than polyM-block and polyG-block. The chemical structures of the degraded alginate oligosaccharides were elucidated to have mannuronate (M) at the reducing end on the basis of NMR analysis, supporting that KJ-2 polyMG-specific alginate lyase preferably degraded the glycosidic bond in M-G linkage than that in G-M linkage. The KJ-2 polyMG-specific alginate lyase can be used in combination with other alginate lyases for a synergistic saccharification of alginate. (orig.)

Liraglutide 3.0 mg for weight management: weight-loss dependent and independent effects.

Science.gov (United States)

Bays, Harold; Pi-Sunyer, Xavier; Hemmingsson, Joanna Uddén; Claudius, Birgitte; Jensen, Christine B; Van Gaal, Luc

2017-02-01

As an adjunct to a reduced-calorie diet and increased physical activity, treatment with liraglutide 3.0 mg for weight management provides a statistically significant and clinically meaningful weight loss of 5.7%-8.0% compared to 1.6%-2.6% with placebo. The objective of this post hoc analysis was to quantify the relative contribution of weight loss to the treatment effects of liraglutide 3.0 mg on key efficacy endpoints. The analysis utilized data from 4725 participants across three randomized, placebo-controlled, double-blind trials that evaluated the efficacy and safety of liraglutide 3.0 mg versus placebo, as an adjunct to a reduced-calorie diet and increased physical activity (ClinicalTrials.gov identifiers: NCT01272219, NCT01272232 and NCT01557166). The duration of two of the trials was 56 weeks; one trial was of 32 weeks' duration. A mediation analysis was performed, which ranked the relative contribution of weight loss to the treatment effects of liraglutide 3.0 mg on key cardiometabolic efficacy endpoints, Apnea-Hypopnea Index (AHI) and health-related quality of life (QoL). A limitation of this type of analysis is that it cannot conclusively prove a causal relationship. In individuals without type 2 diabetes mellitus (T2DM), endpoints predominantly driven by liraglutide-induced weight loss included waist circumference, diastolic blood pressure, triglycerides, high density lipoprotein cholesterol, AHI, and Impact of Weight on Quality of Life-Lite total and physical function scores. Endpoints predominantly independent of weight loss included the glycemic endpoints hemoglobin A1c and fasting plasma glucose in individuals with and without T2DM. Regardless of the degree of dependence on weight loss according to the mediation analysis, greater weight loss was associated with greater improvement in all endpoints. Treatment with liraglutide 3.0 mg contributes to improved cardiometabolic parameters, AHI and health-related QoL through both weight

Impact of interface manipulation of oxide on electrical transport properties and low-frequency noise in MgO/NiFe/MgO heterojunctions

OpenAIRE

Jian-wei Li; Chong-jun Zhao; Chun Feng; Zhongfu Zhou; Guang-hua Yu

2015-01-01

Low-frequency noise and magnetoresistance in sputtered-deposited Ta(5 nm)/MgO (3 nm)/NiFe(10 nm)/MgO(3 nm)/Ta(3 nm) films have been measured as a function of different annealing times at 400°C. These measurements did not change synchronously with annealing time. A significant increase in magnetoresistance is observed for short annealing times (of the order of minutes) and is correlated with a relatively small reduction in 1/f noise. In contrast, a significant reduction in 1/f noise is observe...

Use of atropine to reduce mucosal eversion during intestinal resection and anastomosis in the dog.

Science.gov (United States)

Agrodnia, Marta; Hauptman, Joe; Walshaw, Richard

2003-01-01

To determine whether atropine altered the degree of mucosal eversion during jejunal resection and anastomosis in the dog. Part I: Prospective, blinded, randomized, controlled study using a therapeutic dose (0.04 mg/kg systemic) of atropine. Part II: Prospective, unblinded, assigned, controlled study using a pharmacologic (0.04 mg/kg local arterial) dose of atropine. Part I: Twenty-two young adult female Beagle dogs used during a nonsurvival third-year veterinary student surgical laboratory (small intestinal resection and anastomosis). Part II: Ten young adult female Beagle dogs used immediately after completion of a nonsurvival third-year veterinary student orthopedic surgical laboratory. Part I: Dogs were randomly assigned to receive either atropine (0.04 mg/kg), or an equal volume of saline, given intramuscularly (premedication) and again intravenously prior to intestinal resection. Part II: In each dog, atropine (0.04 mg/kg)/saline was alternately given in the proximal/distal jejunum. Part I: There was no clinically or statistically significant difference between systemic atropine and saline solution on the degree of jejunal mucosal eversion after resection. Part II: There was a statistically significant decrease in jejunal mucosal eversion with atropine compared with saline solution when injected into a local jejunal artery. Systemic atropine (0.04 mg/kg) does not alter the degree of jejunal mucosal eversion during resection and anastomosis. Jejunal intraarterial atropine (0.04 mg/kg) reduced jejunal mucosal eversion during resection and anastomosis. The clinical usefulness and consequences of jejunal arterial atropine administration to reduce mucosal eversion remain to be determined. Copyright 2003 by The American College of Veterinary Surgeons

A pilot weight reduction program over one year significantly reduced DNA strand breaks in obese subjects

Directory of Open Access Journals (Sweden)

Karl-Heinz Wagner

2015-05-01

Conclusion: A sustainable lifestyle change under supervision including physical activity and diet quality over a period of one year was not only responsible to reduce body weight and BMI but also led to significant reduction in all parameters of the comet assay. These results underline the importance of body weight reduction and highlight the positive changes in DNA stability.

Thermoelectric power of PrMg3

Science.gov (United States)

Isikawa, Yosikazu; Somiya, Kazuya; Koyanagi, Huruto; Mizushima, Toshio; Kuwai, Tomohiko; Tayama, Takashi

2010-01-01

PrMg3 is supposed to be one of the strongly correlated electron systems originated from the hybridization between the Pr 4f and conduction electrons, because the gigantic electronic specific heat coefficient C/T was observed at low temperatures. However, a typical behaviour of - ln T dependence was not observed in the temperature dependence of the electrical resistivity. The thermoelectric power S is a powerful tool to investigate the density of states at the Fermi energy. We measured carefully the thermoelectric power of PrMg3 in the temperature range between 2 and 300 K. S is extremely small, ranged within ±1 μV/K over the whole temperature. The value of S/T at low temperature limit was also significantly smaller than expected from the specific heat results. We therefore conclude that the density of state at the Fermi level is not enhanced in PrMg3.

Thermoelectric power of PrMg3

International Nuclear Information System (INIS)

Isikawa, Yosikazu; Somiya, Kazuya; Koyanagi, Huruto; Mizushima, Toshio; Kuwai, Tomohiko; Tayama, Takashi

2010-01-01

PrMg 3 is supposed to be one of the strongly correlated electron systems originated from the hybridization between the Pr 4f and conduction electrons, because the gigantic electronic specific heat coefficient C/T was observed at low temperatures. However, a typical behaviour of - ln T dependence was not observed in the temperature dependence of the electrical resistivity. The thermoelectric power S is a powerful tool to investigate the density of states at the Fermi energy. We measured carefully the thermoelectric power of PrMg 3 in the temperature range between 2 and 300 K. S is extremely small, ranged within ±1 μV/K over the whole temperature. The value of S/T at low temperature limit was also significantly smaller than expected from the specific heat results. We therefore conclude that the density of state at the Fermi level is not enhanced in PrMg 3 .

Electronic structures and optical properties of GaN nanotubes with MgGa–ON co-doping

International Nuclear Information System (INIS)

Yang, Mao; Shi, Jun-jie; Zhang, Min; Zhang, Shuai; Bao, Zhi-qiang; Luo, Shao-jun; Zhou, Tie-Cheng; Zhu, Tian-cong; Li, Xiang; Li, Jia

2013-01-01

Both the electronic structures and the optical properties of single-walled zigzag GaN nanotubes (NTs) with Mg Ga –O N co-doping are investigated using first-principles calculations. We find that the Mg Ga –O N defect complex can exist stably in GaN NTs. The direct band gap width of the GaN NTs can be reduced by means of the Mg Ga –O N co-doping. The electrons of the valence band maximum (VBM) state are localized around the N atoms bonded with the Mg atom. The imaginary part ε 2 of the complex dielectric function of GaN NTs with Mg Ga –O N co-doping has a sharp peak closely related to the optical transitions between the VBM and conduction band minimum states. - Highlights: ► The Mg Ga –O N defect complex can exist stably in GaN NTs. ► The band gap of the GaN NTs can be reduced due to the Mg Ga –O N co-doping. ► The VBM states are localized around the N atoms bonded with the Mg atom. ► The ε 2 -plot has a peak related to the optical transition from the VBM to CBM state

Synthesis and optical properties of ZnO/MgO nanocomposite

International Nuclear Information System (INIS)

Chawla, Santa; Jayanthi, K.; Chander, Harish; Haranath, D.; Halder, S.K.; Kar, M.

2008-01-01

ZnO and its ternary alloy ZnMgO offer an excellent material system with potential in applications related to quantum well and photonic devices in UV and visible. ZnO and ZnO/MgO composite were prepared by solid-state mixing and sintering at high temperature in reducing atmosphere. ZnO/MgO nanocomposites up to 50% Mg content could be prepared by this method. The resultant sample was in powder form and has distribution of grain sizes. X-ray diffraction showed hexagonal ZnO structure with small signature of cubic MgO, which increased with increasing Mg content. Particle size estimated from Scherrer formula was in the range of 40 nm, which reflected the average crystallite size. Photoluminescence (PL) studies showed excitation peak around 290 nm (4.3 eV) and 350 nm (3.5 eV). Pure ZnO nanophosphor showed emission peak around 508 nm, which blue shifted with increasing Mg content. Time resolved decay of PL indicated decay time in the microsecond time scale. Optical absorption spectra showed bandgap about 5.6 eV for ZnO/MgO nanocomposite with 50% Mg content. The optical absorption measurement was done in the colloidal suspension form and it is expected that only nanoparticles of very small grain size were effectively contributing to the optical absorption process. The large bandgap could then be manifestation of quantum size effect

Hydriding and dehydriding rates of Mg, Mg-10TaF5, and Mg-10NbF5 prepared via reactive mechanical grinding

Science.gov (United States)

Song, Myoung Youp; Kwak, Young Jun; Lee, Seong Ho; Park, Hye Ryoung

2015-01-01

In this work, TaF5 and NbF5 were chosen as additives to enhance the hydriding and dehydriding rates of Mg. Mg, Mg-10TaF5, and Mg-10NbF5 samples were prepared by reactive mechanical grinding. The hydriding and dehydriding properties of the samples were then examined. Mg-10TaF5 had the largest amount of hydrogen absorbed for 30 min and the highest initial dehydriding rate after incubation period, followed in order by Mg-10NbF5, and Mg. At 593 K under 12 bar H2 at the first cycle, Mg-10TaF5 absorbed 3.63 wt% H for 5 min and 4.53 wt% H for 30 min. At 593 K under 1.0 bar H2 at the first cycle, Mg-10TaF5 desorbed 0 wt% H for 2.5 min, 0.59 wt% H for 5 min, 3.42 wt% H for 30 min, and 4.24 wt% H for 60 min. The reactive mechanical grinding of Mg with TaF5 or NbF5 is believed to have facilitated the nucleation and to have decreased the diffusion distances of hydrogen atoms. These two effects are believed to have increased the hydriding and dehydriding rates of Mg. The MgF2 and Ta2H formed in Mg-10TaF5, and the MgF2, NbH2, and NbF3 formed in Mg-10NbF5 are considered to have enhanced both of these effects.

Superconducting properties of MgB2 particle impregnated with Mg-based alloys

International Nuclear Information System (INIS)

Shimizu, Yusuke; Matsuda, Kenji; Mizutani, Manabu; Nishimura, Katsuhiko; Kawabata, Tokimasa; Ikeno, Susumu; Hishinuma, Yoshimitsu; Aoyama, Shigeki

2011-01-01

The three-dimensional penetration method combined with semi-solid casting (SS-3DPC) was utilized to prepare magnesium diboride (MgB 2 ) powder composite materials with various host materials of Mg, Mg-3%Al, Mg-3%Al-1%Zn, Mg-9%Al, and Mg-9%Al-1%Zn. X-ray diffraction measurements indicated predominant peak patterns of MgB 2 and a host alloy, implying that the host material tightly bonded MgB 2 grains without melting the MgB 2 powder. This was confirmed by SEM images. Measured electrical resistivity and magnetization versus temperature showed clear signals of superconducting transition temperature of 27-38 K for all the samples cut out from the billets. Magnetic hysteresis loop observed at 5 K enabled us to estimate a critical current density (J c ) based on the extended Bean model. Additions of aluminum and zinc elements to magnesium host-matrix were found to enhance J c and increase residual resistivity (ρ 0 ) suggesting that aluminum and zinc have an effect on pinning magnetic flux flow for J c enhancement, and scattering conduction electrons for increase of ρ 0 . (author)

Why did the FDA approve efavirenz 800 mg when co-administered with rifampin?

Science.gov (United States)

Liu, Jiang; Chan-Tack, Kirk M; Jadhav, Pravin; Seo, Shirley; Robertson, Sarah M; Kraft, Jeffrey; Singer, Mary E; Struble, Kimberly A; Arya, Vikram

2014-06-01

Literature reports regarding the efficacy of efavirenz (EFV) 600 mg with rifampin (RIF) are not consistent. Evaluation of a drug-drug interaction (DDI) study and supportive semi-mechanistic population pharmacokinetic (PK) analyses were undertaken to help delineate this issue. DDI study and supportive semi-mechanistic population PK analyses were provided by BMS. Population PK analysis was based on six studies with intensive EFV PK sampling. An ACTG study with sparse PK sampling was used for model evaluation. Simulations compared EFV exposure at various doses in combination with RIF to EFV exposures at 600 mg once daily (QD). Effects of CYP2B6 genotypes on the magnitude of EFV-RIF interaction were also explored. In DDI study, co-administering EFV 600 mg QD and RIF reduced mean EFV exposure by ~ 30%. Population PK model provided acceptable predictive performance of central tendency and variability for EFV C0, Cmax, and AUC. Simulations predicted that increasing EFV to 800 mg QD with RIF would result in EFV AUC and Cmax similar to EFV 600 mg QD alone. EFV AUC and Cmax were ~ 2 times higher in subjects with reduced function CYP2B6 genotypes. However, the RIF effect was consistent across all genotypes. EFV dose adjustment to 800 mg QD did not increase the risk of overexposure compared to 600 mg EFV QD within each genotype. Dose adjustment based on matching systemic exposure was recommended to mitigate the potential for sub-therapeutic EFV exposures. Our review did not reveal any safety concerns in subjects receiving EFV 800 mg QD with RIF.

A filter for reducing the angular dependence of LiF; Ti, Mg for beta radiation

International Nuclear Information System (INIS)

Akabani, G.; Poston, J.W. Sr.

1990-01-01

This paper reports on an improvement in the angular dependence of LiF:Ti,Mg (TAD-100) for beta radiation which was achieved by using a special filter design which produced a constant dosimeter response over a range of +70 degrees and -70 degrees. The filter material used was acetate. The filter design was tested with three different beta sources, Sr/Y-90, Tl-204 and Pm-147 with average energies of 0.8, 0.24 and 0.06 MeV, respectively. The average response at 180 degrees of the new filtered dosimeter differed by less than 5% when compared to the response at zero degrees. An average decrease in sensitivity of 53% for Sr-90, 70% for Tl-204 and 67% for Pm-147 was obtained due to filter use. All doses were calculated for a depth dose in tissue of 0.07 mm equivalent to 7 mg/cm 2 as is recommended in ICRP Publication 26. A comparison of the energy dependence for a bare TAD-100 at 0.0 mm and 0.07 mm depth in tissue was obtained

Optical absorption and thermoluminescence in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature

International Nuclear Information System (INIS)

Delgado, L.

1984-01-01

Optical absorption and thermoluminescence (TL) studies in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature are presented. In pure Mg O the thermal annihilation of Fe3+ by recombination with thermally released electrons at ∼ 90 and 175 degree centigree and the V center annealing by hole release up to 100 degree centigree cause the observed glow peaks at these temperatures. The TL excitation spectrum shows two maxima at 245 nm (electron center) and 288 nm (Fe3+). In Mg O:Ni X irradiation induces Fe 2 + →- Fe 3 + and Ni 2 + → Ni 3 + oxidations. Two TL emission bands centered at 110 degree centigree (red) and 80 o C (green) are assigned to electron release and their recombination at Fe 3 + and Ni 3 + respectively. In Mg O:Li two TL emission bands, one blue (430 nm) and the other red (730 nm) with excitation maxima at 245 nm (electron center) and 200 nm (hole center) respectively are observed. No V-center formation was detected in both Ni and Li doped samples. (Author) 42 refs

Dextromethorphan interactions with histaminergic and serotonergic treatments to reduce nicotine self-administration in rats.

Science.gov (United States)

Briggs, Scott A; Hall, Brandon J; Wells, Corinne; Slade, Susan; Jaskowski, Paul; Morrison, Margaret; Rezvani, Amir H; Rose, Jed E; Levin, Edward D

2016-03-01

Combining effective treatments with diverse mechanisms of action for smoking cessation may provide better therapy by targeting multiple points of control in the neural circuits underlying addiction. Previous research in a rat model has shown that dextromethorphan, which has α3β4 nicotinic and NMDA glutamatergic antagonist actions, significantly decreases nicotine self-administration. We have found in the rat model that the H1 histamine antagonist pyrilamine and the serotonin 5HT2C agonist lorcaserin also significantly reduce nicotine self-administration. The current studies were conducted to determine the interactive effects of dextromethorphan with pyrilamine and lorcaserin on nicotine self-administration in rats. Young adult female rats were fitted with jugular IV catheters and trained to self-administer a nicotine infusion dose of 0.03-mg/kg/infusion. In an initial dose-effect function study of dextromethorphan, we found a monotonic decrease in nicotine self-administration over a dose range of 1 to 30-mg/kg with the lowest effective dose of 3-mg/kg. Then, with two separate cohorts of rats, dextromethorphan (0, 3.3, and 10-mg/kg) interactions with pyrilamine (0, 4.43, and 13.3-mg/kg) were investigated as well as interactions with lorcaserin (0, 0.3125 and 0.625-mg/kg). In the pyrilamine-dextromethorphan interaction study, an acute dose of pyrilamine (13.3-mg/kg) as well as an acute dose of dextromethorphan caused a significant decrease in nicotine self-administration. There were mutually augmenting effects of these two drugs. The combination of dextromethorphan (10-mg/kg) and pyrilamine (13.3-mg/kg) significantly lowered nicotine self-administration relative to either 10-mg/kg of dextromethorphan alone (pdextromethorphan study, an acute dose of lorcaserin (0.312-mg/kg) as well as an acute dose of dextromethorphan (10-mg/kg) caused a significant decrease in nicotine self-administration replicating previous findings. Augmenting interactions were observed with

In-situ grazing incidence X-ray diffraction measurements of relaxation in Fe/MgO/Fe epitaxial magnetic tunnel junctions during annealing

Energy Technology Data Exchange (ETDEWEB)

Eastwood, D.S. [Department of Physics, Durham University, South Road, Durham DH1 3LE (United Kingdom); Ali, M.; Hickey, B.J. [Department of Physics and Astronomy, University of Leeds, Leeds LS2 1JT (United Kingdom); Tanner, B.K., E-mail: b.k.tanner@dur.ac.uk [Department of Physics, Durham University, South Road, Durham DH1 3LE (United Kingdom)

2013-12-15

The relaxation of Fe/MgO/Fe tunnel junctions grown epitaxially on (001) MgO substrates has been measured by in-situ grazing incidence in-plane X-ray diffraction during the thermal annealing cycle. We find that the Fe layers are fully relaxed and that there are no irreversible changes during annealing. The MgO tunnel barrier is initially strained towards the Fe but on annealing, relaxes and expands towards the bulk MgO value. The strain dispersion is reduced in the MgO by about 40% above 480 K post-annealing. There is no significant change in the “twist” mosaic. Our results indicate that the final annealing stage of device fabrication, crucial to attainment of high TMR, induces substantial strain relaxation at the MgO barrier/lower Fe electrode interface. - Highlights: • Lattice relaxation of Fe/MgO/Fe epitaxial magnetic tunnel junctions measured. • In-plane lattice parameter of Fe equal to bulk value; totally relaxed. • MgO barrier initially strained towards the Fe but relaxes on annealing. • Reduction in strain dispersion in the MgO barrier by 40% above about 470 K. • No change in the in-plane “twist” mosaic throughout the annealing cycle.

Detection and clinical significance of serum autoantibodies in patients with myasthenia gravis

Directory of Open Access Journals (Sweden)

Yun LIU

2016-10-01

Full Text Available Objective To investigate the expressions and clinical significance of serum anti - acetylcholine receptor antibodies (AChR-Ab, anti-Titin antibodies (Titin-Ab, and anti-Ryanodine receptor antibodies (RyR-Ab in patients with myasthenia gravis (MG. Methods Serum AChR-Ab, Titin-Ab and RyR-Ab were detected with enzyme-linked immunosorbent assay (ELISA in 182 MG patients, 105 patients of other neurological diseases (OND and 62 normal controls. Results Serum AChR-Ab, Titin-Ab and RyR-Ab were detected positive respectively in 68.13% (124/182, 64.29% (117/182 and 67.03% (122/182 of patients in MG group. The positive rates of those antibodies in MG group were significantly higher than those in OND group (P = 0.000, for all and control group (P = 0.000, for all. When 3 antibodies coexisted, the sensitivity in the diagnosis of MG was 41.21%, with 99.40% of specificity. There was no significant difference in the positive rate of serum AChR-Ab, Titin-Ab and RyR-Ab between early-onset MG subgroup and late-onset MG subgroup (P > 0.05, for all. The positive rates of AChR-Ab were significantly higher in MG patients with thymoma than in those without thymoma (P = 0.004. There was no significant difference in the positive rate of Titin-Ab and RyR-Ab between MG with thymoma subgroup and MG without thymoma subgroup (P > 0.05, for all. The prevalence of AChR-Ab in generalized MG (GMG atients (Ⅱa and Ⅱb was higher than those in ocular MG (OMG patients (typeⅠ; P = 0.005, 0.012. There was no significant difference in the positive rate of Titin-Ab and RyR-Ab between GMG subgroup and OMG subgroup (P > 0.05, for all. Conclusions Serum AChR-Ab, Titin-Ab and RyR-Ab can be used as ndicators of the diagnosis of MG. Patients with 3 coexisted positive antibodies are highly suspected as MG. Higher AChR-Ab level in serum of OMG patients indicates the possibility of progressing to GMG. DOI: 10.3969/j.issn.1672-6731.2016.10.007

Does chocolate reduce blood pressure? A meta-analysis.

Science.gov (United States)

Ried, Karin; Sullivan, Thomas; Fakler, Peter; Frank, Oliver R; Stocks, Nigel P

2010-06-28

Dark chocolate and flavanol-rich cocoa products have attracted interest as an alternative treatment option for hypertension, a known risk factor for cardiovascular disease. Previous meta-analyses concluded that cocoa-rich foods may reduce blood pressure. Recently, several additional trials have been conducted with conflicting results. Our study summarises current evidence on the effect of flavanol-rich cocoa products on blood pressure in hypertensive and normotensive individuals. We searched Medline, Cochrane and international trial registries between 1955 and 2009 for randomised controlled trials investigating the effect of cocoa as food or drink compared with placebo on systolic and diastolic blood pressure (SBP/DBP) for a minimum duration of 2 weeks. We conducted random effects meta-analysis of all studies fitting the inclusion criteria, as well as subgroup analysis by baseline blood pressure (hypertensive/normotensive). Meta-regression analysis explored the association between type of treatment, dosage, duration or baseline blood pressure and blood pressure outcome. Statistical significance was set at P chocolate compared with control (mean BP change +/- SE: SBP: -3.2 +/- 1.9 mmHg, P = 0.001; DBP: -2.0 +/- 1.3 mmHg, P = 0.003). However, subgroup meta-analysis was significant only for the hypertensive or prehypertensive subgroups (SBP: -5.0 +/- 3.0 mmHg; P = 0.0009; DBP: -2.7 +/- 2.2 mm Hg, P = 0.01), while BP was not significantly reduced in the normotensive subgroups (SBP: -1.6 +/- 2.3 mmHg, P = 0.17; DBP: -1.3 +/- 1.6 mmHg, P = 0.12). Nine trials used chocolate containing 50% to 70% cocoa compared with white chocolate or other cocoa-free controls, while six trials compared high- with low-flavanol cocoa products. Daily flavanol dosages ranged from 30 mg to 1000 mg in the active treatment groups, and interventions ran for 2 to 18 weeks. Meta-regression analysis found study design and type of control to be borderline significant but possibly indirect predictors

Selective Glucocorticoid Receptor (GR-II Antagonist Reduces Body Weight Gain in Mice

Directory of Open Access Journals (Sweden)

Tomoko Asagami

2011-01-01

Full Text Available Previous research has shown that mifepristone can prevent and reverse weight gain in animals and human subjects taking antipsychotic medications. This proof-of-concept study tested whether a more potent and selective glucocorticoid receptor antagonist could block dietary-induced weight gain and increase insulin sensitivity in mice. Ten-week-old, male, C57BL/6J mice were fed a diet containing 60% fat calories and water supplemented with 11% sucrose for 4 weeks. Groups (=8 received one of the following: CORT 108297 (80 mg/kg QD, CORT 108297 (40 mg/kg BID, mifepristone (30 mg/kg BID, rosiglitazone (10 mg/kg QD, or vehicle. Compared to mice receiving a high-fat, high-sugar diet plus vehicle, mice receiving a high-fat, high-sugar diet plus either mifepristone or CORT 108297 gained significantly less weight. At the end of the four week treatment period, mice receiving CORT 108297 40 mg/kg BID or CORT 108297 80 mg/kg QD also had significantly lower steady plasma glucose than mice receiving vehicle. However, steady state plasma glucose after treatment was not highly correlated with reduced weight gain, suggesting that the effect of the glucocorticoid receptor antagonist on insulin sensitivity may be independent of its mitigating effect on weight gain.

Functional desensitization to isoproterenol without reducing cAMP production in canine failing cardiocytes.

Science.gov (United States)

Laurent, C E; Cardinal, R; Rousseau, G; Vermeulen, M; Bouchard, C; Wilkinson, M; Armour, J A; Bouvier, M

2001-02-01

To corroborate alterations in the functional responses to beta-adrenergic receptor (beta-AR) stimulation with changes in beta-AR signaling in failing cardiomyocytes, contractile and L-type Ca(2+) current responses to isoproterenol along with stimulated cAMP generation were compared among cardiomyocytes isolated from canines with tachycardia-induced heart failure or healthy hearts. The magnitude of shortening of failing cardiomyocytes was significantly depressed (by 22 +/- 4.4%) under basal conditions, and the maximal response to isoproterenol was significantly reduced (by 45 +/- 18%). Similar results were obtained when the responses in the rate of contraction and rate of relaxation to isoproterenol were considered. The L-type Ca(2+) current amplitude measured in failing cardiomyocytes under basal conditions was unchanged, but the responses to isoproterenol were significantly reduced compared with healthy cells. Isoproterenol-stimulated cAMP generation was similar in sarcolemmal membranes derived from the homogenates of failing (45 +/- 6.8) and healthy cardiomyocytes (52 +/- 8.5 pmol cAMP. mg protein(-1). min(-1)). However, stimulated cAMP generation was found to be significantly reduced when the membranes were derived from the homogenates of whole tissue (failing: 67 +/- 8.1 vs. healthy: 140 +/- 27.8 pmol cAMP. mg protein(-1). min(-1)). Total beta-AR density was not reduced in membranes derived from either whole tissue or isolated cardiomyocyte homogenates, but the beta(1)/beta(2) ratio was significantly reduced in the former (failing: 45/55 vs. healthy: 72/28) without being altered in the latter (failing: 72/28, healthy: 77/23). We thus conclude that, in tachycardia-induced heart failure, reduction in the functional responses of isolated cardiomyocytes to beta-AR stimulation may be attributed to alterations in the excitation-contraction machinery rather than to limitation of cAMP generation.

The Influence of MgH2 on the Assessment of Electrochemical Data to Predict the Degradation Rate of Mg and Mg Alloys

Directory of Open Access Journals (Sweden)

Wolf-Dieter Mueller

2014-06-01

Full Text Available Mg and Mg alloys are becoming more and more of interest for several applications. In the case of biomaterial applications, a special interest exists due to the fact that a predictable degradation should be given. Various investigations were made to characterize and predict the corrosion behavior in vitro and in vivo. Mostly, the simple oxidation of Mg to Mg2+ ions connected with adequate hydrogen development is assumed, and the negative difference effect (NDE is attributed to various mechanisms and electrochemical results. The aim of this paper is to compare the different views on the corrosion pathway of Mg or Mg alloys and to present a neglected pathway based on thermodynamic data as a guideline for possible reactions combined with experimental observations of a delay of visible hydrogen evolution during cyclic voltammetry. Various reaction pathways are considered and discussed to explain these results, like the stability of the Mg+ intermediate state, the stability of MgH2 and the role of hydrogen overpotential. Finally, the impact of MgH2 formation is shown as an appropriate base for the prediction of the degradation behavior and calculation of the corrosion rate of Mg and Mg alloys.

The cytotoxicity of a 2-chloroethylnitrosourea analog of sarcosinamide in the SK-MG-1 human glioma cell line as a possible indicator for transport

Energy Technology Data Exchange (ETDEWEB)

Skalski, V.; Feindel, W.; Panasci, L.C. (Lady Davis Institute for Medical Research, Montreal, Quebec (Canada))

1989-07-01

The cytotoxicities of a new sarcosinamide analog of chloroethylnitrosourea (SarCNU) and of BCNU were examined in the glioma cell line SK-MG-1 in the presence or absence of excess concentrations of amino acids and sarcosinamide. The cytotoxicity of SarCNU, but not of BCNU, was significantly reduced in the presence of excess sarcosinamide. The stability of SarCNU was not significantly altered by increasing concentrations of sarcosinamide. In order to investigate the possibility that sarcosinamide inhibits the uptake of SarCNU, the transport of tritiated sarcosinamide was examined in SK-MG-1 cells. The uptake of 3H-sarcosinamide was inhibited by excess, unlabelled sarcosinamide and SarCNU but not by BCNU, glycine or sarcosine. These results suggest the existence of a carrier-mediated transport for sarcosinamide which can accomodate SarCNU in SK-MG-1 cells.

Structural characteristics and corrosion behavior of biodegradable Mg-Zn, Mg-Zn-Gd alloys.

Science.gov (United States)

Kubásek, J; Vojtěch, D

2013-07-01

In this research, binary Mg-Zn (up to 3 wt% Zn) and ternary Mg-Zn-Gd (up to 3 wt% Gd, 3 wt% Zn) alloys were prepared by induction melting in an argon atmosphere. The structures of these alloys were characterized using light and scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction and X-ray fluorescence. In addition, Brinell hardness measurements were taken to supplement these studies. Corrosion behavior was evaluated by immersion tests and potentiodynamic measurements in a physiological solution (9 g/l NaCl). Depending on the composition, structures of the as-cast alloys contained α-Mg dendrites, MgZn, Mg5Gd and Mg3Gd2Zn3 phases. Compared to pure Mg, zinc improved the corrosion resistance of binary Mg-Zn. Gadolinium also improved the corrosion resistance in the case of Mg-1Zn-3Gd alloy. The highest corrosion rate was observed for Mg-3Zn-3Gd alloy. Our results improve the understanding of the relationships between the structure and corrosion behavior of our studied alloy systems.

Coherent interface structures and intergrain Josephson coupling in dense MgO/Mg{sub 2}Si/MgB{sub 2} nanocomposites

Energy Technology Data Exchange (ETDEWEB)

Ueno, Katsuya; Takahashi, Kazuyuki; Uchino, Takashi, E-mail: uchino@kobe-u.ac.jp [Department of Chemistry, Graduate School of Science, Kobe University, Nada, Kobe 657-8501 (Japan); Nagashima, Yukihito [Nippon Sheet Glass Co., Ltd., Konoike, Itami 664-8520 (Japan); Seto, Yusuke [Department of Planetology, Graduate School of Science, Kobe University, Nada, Kobe 657-8501 (Japan); Matsumoto, Megumi; Sakurai, Takahiro [Center for Support to Research and Education Activities, Kobe University, Nada, Kobe 657-8501 (Japan); Ohta, Hitoshi [Molecular Photoscience Research Center, Kobe University, Nada, Kobe 657-8501 (Japan)

2016-07-07

Many efforts are under way to control the structure of heterointerfaces in nanostructured composite materials for designing functionality and engineering application. However, the fabrication of high-quality heterointerfaces is challenging because the crystal/crystal interface is usually the most defective part of the nanocomposite materials. In this work, we show that fully dense insulator (MgO)/semiconductor(Mg{sub 2}Si)/superconductor(MgB{sub 2}) nanocomposites with atomically smooth and continuous interfaces, including epitaxial-like MgO/Mg{sub 2}Si interfaces, are obtained by solid phase reaction between metallic magnesium and a borosilicate glass. The resulting nanocomposites exhibit a semiconductor-superconducting transition at 36 K owing to the MgB{sub 2} nanograins surrounded by the MgO/Mg{sub 2}Si matrix. This transition is followed by the intergrain phase-lock transition at ∼24 K due to the construction of Josephson-coupled network, eventually leading to a near-zero resistance state at 17 K. The method not only provides a simple process to fabricate dense nanocomposites with high-quality interfaces, but also enables to investigate the electric and magnetic properties of embedded superconducting nanograins with good intergrain coupling.

Wear Behavior and Microstructure of Mg-Sn Alloy Processed by Equal Channel Angular Extrusion.

Science.gov (United States)

Chen, Jung-Hsuan; Shen, Yen-Chen; Chao, Chuen-Guang; Liu, Tzeng-Feng

2017-11-16

Mg-5wt.% Sn alloy is often used in portable electronic devices and automobiles. In this study, mechanical properties of Mg-5wt.% Sn alloy processed by Equal Channel Angular Extrusion (ECAE) were characterized. More precisely, its hardness and wear behavior were measured using Vickers hardness test and a pin-on-disc wear test. The microstructures of ECAE-processed Mg-Sn alloys were investigated by scanning electron microscope and X-ray diffraction. ECAE process refined the grain sizes of the Mg-Sn alloy from 117.6 μm (as-cast) to 88.0 μm (one pass), 49.5 μm (two passes) and 24.4 μm (four passes), respectively. Meanwhile, the hardness of the alloy improved significantly. The maximum wear resistance achieved in the present work was around 73.77 m/mm³, which was obtained from the Mg-Sn alloy treated with a one-pass ECAE process with a grain size of 88.0 μm. The wear resistance improvement was caused by the grain size refinement and the precipitate of the second phase, Mg₂Sn against the oxidation of the processed alloy. The as-cast Mg-Sn alloy with the larger grain size, i.e., 117.6 μm, underwent wear mechanisms, mainly adhesive wear and abrasive wear. In ECAE-processed Mg-Sn alloy, high internal energy occurred due to the high dislocation density and the stress field produced by the plastic deformation, which led to an increased oxidation rate of the processed alloy during sliding. Therefore, the oxidative wear and a three-body abrasive wear in which the oxide debris acted as the three-body abrasive components became the dominant factors in the wear behavior, and as a result, reduced the wear resistance in the multi-pass ECAE-processed alloy.

Effects of trace Be and Sc addition on the thermal stability of Al–7Si–0.6Mg alloys

Energy Technology Data Exchange (ETDEWEB)

Tzeng, Yu-Chih [Department of Mechanical Engineering, National Central University, Jhongli, Taiwan (China); Wu, Chih-Ting [Department of Vehicle Engineering, Army Academy R.O.C., Jhongli, Taiwan (China); Yang, Cheng-Hsien [Institute of Materials Science and Engineering, National Central University, Jhongli, Taiwan (China); Lee, Sheng-Long, E-mail: shenglon@cc.ncu.edu.tw [Department of Mechanical Engineering, National Central University, Jhongli, Taiwan (China)

2014-09-22

In the present study, the effects of trace amounts of beryllium (Be, 0.05 wt%) and scandium (Sc, 0.04 wt%) addition on the microstructures and thermal stability of Al–7Si–0.6Mg alloys were investigated. The results show that traces of Be and Sc significantly reduce the amount of the iron-bearing phase and the interdendritic shrinkage. Be transformed the acicular iron-bearing phases into the nodular Al–Fe–Si iron-bearing phase, which is less harmful to ductility. Moreover, the addition of Be increased the Mg content of the solid solution within the matrix, prompting greater precipitation of the metastable Mg{sub 2}Si phase after T6 heat treatment and effectively enhancing the mechanical properties of the alloy. However, during the following thermal exposure at 250 °C for 100 h, the metastable Mg{sub 2}Si phase grew into the coarse β-Mg{sub 2}Si equilibrium phase, resulting in a decrease in the mechanical strength of the alloy. Meanwhile, the addition of Sc had insignificant effect on the amount of metastable Mg{sub 2}Si phase that precipitated. However, here, the iron-bearing phase was a nodular Al{sub 12}Si{sub 6}Fe{sub 2}(Mg,Sc){sub 5} phase, which significantly enhanced the density of the castings. After the same thermal exposure procedure, it was remarkably found that the precipitation of fine Al{sub 3}Sc particles effectively inhibited grain growth and hindered the movement of dislocations. These factors led to the Sc-containing alloy having better mechanical properties (strength and ductility) than the alloys without Sc or with Be during the following thermal exposure at 250 °C.

Atomic layer deposited ZrO2 nanofilm on Mg-Sr alloy for enhanced corrosion resistance and biocompatibility.

Science.gov (United States)

Yang, Qiuyue; Yuan, Wei; Liu, Xiangmei; Zheng, Yufeng; Cui, Zhenduo; Yang, Xianjin; Pan, Haobo; Wu, Shuilin

2017-08-01

The biodegradability and good mechanical property of magnesium alloys make them potential biomedical materials. However, their rapid corrosion rate in the human body's environment impairs these advantages and limits their clinical use. In this work, a compact zirconia (ZrO 2 ) nanofilm was fabricated on the surface of a magnesium-strontium (Mg-Sr) alloy by the atomic layer deposition (ALD) method, which can regulate the thickness of the film precisely and thus also control the corrosion rate. Corrosion tests reveal that the ZrO 2 film can effectively reduce the corrosion rate of Mg-Sr alloys that is closely related to the thickness of the film. The cell culture test shows that this kind of ZrO 2 film can also enhance the activity and adhesion of osteoblasts on the surfaces of Mg-Sr alloys. The significance of the current work is to develop a zirconia nanofilm on biomedical MgSr alloy with controllable thickness precisely through atomic layer deposition technique. By adjusting the thickness of nanofilm, the corrosion rate of Mg-Sr alloy can be modulated, thereafter, the degradation rate of Mg-based alloys can be controlled precisely according to actual clinical requirement. In addition, this zirconia nanofilm modified Mg-Sr alloys show excellent biocompatibility than the bare samples. Hence, this work provides a new surface strategy to control the degradation rate while improving the biocompatibility of substrates. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Plasma gelsolin is reduced in trauma patients

DEFF Research Database (Denmark)

Dahl, B; Schiødt, F V; Ott, P

1999-01-01

in the circulation can lead to a condition resembling multiple organ dysfunction syndrome (MODS), and we have previously demonstrated that the level of Gc-globulin is decreased after severe trauma. The purpose of the present study was to determine whether the plasma levels of gelsolin were altered in the early phase...... after trauma. Twenty-three consecutive trauma patients were studied. Plasma samples were assayed for gelsolin by immunonephelometry with polyclonal rabbit antihuman gelsolin prepared in our own laboratory. The median time from injury until the time the first blood sample was taken was 52 min (range 20......-110) and the median Injury Severity Score (ISS) was 20 (range 4-50). The gelsolin level on admission was reduced significantly in the trauma patients compared with normal controls. The median level was 51 mg/L (7-967) vs. 207 mg/L (151-621), P

An Evaluation of Theraphy with Fluconazole 150 mg Tablets Compared to Fluconazole 150 mg Tablets Plus Dermoxen Lenitiva Cream in The Time to Reduce Simptomatology in Women with Vulvovaginal Candidiasis

Directory of Open Access Journals (Sweden)

Davide Carati

2014-06-01

Full Text Available Aim of the study. Authors investigated first of all the time to onset of first relief of symptoms. Secondary measures included the time to overall relief of symptoms and the reoccurrence rate over the first 45 days after the first visit. Methods. A randomized, open-label, parallel study evaluated 47 women with moderate to severe symptoms of Vulvo Vaginal Candidiasis (VVC. Patients were divided into two groups of treatment: group 1 followed a therapy with Fluconazole 150 mg tablets, while group 2 had a therapy based on Fluconazole 150 mg tablets coadjuvated by Dermoxen Lenitiva cream. Results. The time at which 50% of patients experienced first relief of symptoms was 24.6 hours for Group 1, while for Group 2 it was 12.4 hours (P<0.05. There were significant differences between the two groups in respect to the time of first relief of symptoms and reoccurrence of infection within 45 days of treatment. Conclusions. Combined treatment with Fluconazole 150 mg tablets and by Dermoxen Lenitiva cream provides statistically significant improvement in the time of first relief of symptoms, complete relief of symptoms and relapse time in the treatment of VVC compared to fluconazole 150 mg tablets only.

Dual-scale phase-field simulation of Mg-Al alloy solidification

International Nuclear Information System (INIS)

Monas, A; Shchyglo, O; Tegeler, M; Steinbach, I; Höche, D

2015-01-01

Phase-field simulations of the nucleation and growth of primary α-Mg phase as well as secondary, β-phase of a Mg-Al alloy are presented. The nucleation model for α- and β-Mg phases is based on the “free growth model” by Greer et al.. After the α-Mg phase solidification we study a divorced eutectic growth of α- and β-Mg phases in a zoomed in melt channel between α-phase dendrites. The simulated cooling curves and final microstructures of α-grains are compared with experiments. In order to further enhance the resolution of the interdendritic region a high-performance computing approach has been used allowing significant simulation speed gain when using supercomputing facilities. (paper)

Microstructures and mechanical properties of pure Mg processed by rotary swaging

International Nuclear Information System (INIS)

Gan, W.M.; Huang, Y.D.; Wang, R.; Wang, G.F.; Srinivasan, A.; Brokmeier, H.-G.; Schell, N.; Kainer, K.U.; Hort, N.

2014-01-01

Highlights: • Grain size of pure Mg can be effectively reduced by rotary swaging processing. • The dominated texture of the swaged pure Mg was a basal fibre. • Twinning and non-basal plane sliding accommodated the swaging process. • Gradient texture distribution was observed through the rod diameter. • There existed a slight shear deformation on the surface of the swaged rod. - Abstract: Microstructures and tensile properties of commercial pure magnesium processed by rotary swaging (RS) technique were investigated. Bulk and gradient textures in the RS processed Mg were characterised by neutron and synchrotron diffractions, respectively. Grains of the pure Mg were gradually refined with increase in the RS passes, which largely contributed to an increase in the tensile yield strength. A dominated basal fibre texture was observed in the RS processed pure Mg. Accommodated twinning deformation was also observed. Both the optical observations and texture analyses through the diameter of the swaged rod showed a gradient evolution in microstructure

Incorporation of Mg, Sr, Ba, U, and B in High-Mg Calcite Benthic Foraminifers Cultured Under Controlled pCO2

Science.gov (United States)

Not, C.; Thibodeau, B.; Yokoyama, Y.

2018-01-01

Measurement of elemental ratios (E/Ca) has been performed in two symbiont-bearing species of high-Mg calcite benthic foraminifers (hyaline, Baculogypsina sphaerulata and porcelaneous, Amphisorus hemprichii), cultured under five pCO2 levels, representing preindustrial, modern, and three predicted future values. E/Ca ratios were analyzed by Laser Ablation coupled with Inductively Coupled Plasma Mass Spectrometer (LA-ICP-MS). We measured several E/Ca, such as Mg/Ca, Sr/Ca, Ba/Ca, U/Ca, and B/Ca simultaneously. We observed that high-Mg calcite benthic foraminifers possess higher E/Ca than low-Mg calcite foraminifers, irrespective of their calcification mode (hyaline or porcelaneous). In both modes of calcification, Mg, Sr, Ba, U, and B incorporation could be controlled by Rayleigh fractionation. However, more data are needed to validate and quantify the relative importance of this process and closely investigate the presence/absence of other mechanism. Therefore, it highlights the need for a multielemental approach when looking at trace element incorporation. Finally, no significant relationship was observed between the different ratios and the pCO2 of the water, suggesting that none of the Mg/Ca, Sr/Ca, Ba/Ca, U/Ca, and B/Ca is sensitive to bottom water pCO2 or pH for these species.

Global investigation of the Mg atom and ion layers using SCIAMACHY/Envisat observations between 70 and 150 km altitude and WACCM-Mg model results

Directory of Open Access Journals (Sweden)

M. P. Langowski

2015-01-01

Full Text Available Mg and Mg+ concentration fields in the upper mesosphere/lower thermosphere (UMLT region are retrieved from SCIAMACHY/Envisat limb measurements of Mg and Mg+ dayglow emissions using a 2-D tomographic retrieval approach. The time series of monthly mean Mg and Mg+ number density and vertical column density in different latitudinal regions are presented. Data from the limb mesosphere–thermosphere mode of SCIAMACHY/Envisat are used, which cover the 50 to 150 km altitude region with a vertical sampling of ≈3.3 km and latitudes up to 82°. The high latitudes are not observed in the winter months, because there is no dayglow emission during polar night. The measurements were performed every 14 days from mid-2008 until April 2012. Mg profiles show a peak at around 90 km altitude with a density between 750 cm−3 and 1500 cm−3. Mg does not show strong seasonal variation at latitudes below 40°. For higher latitudes the density is lower and only in the Northern Hemisphere a seasonal cycle with a summer minimum is observed. The Mg+ peak occurs 5–15 km above the neutral Mg peak altitude. These ions have a significant seasonal cycle with a summer maximum in both hemispheres at mid and high latitudes. The strongest seasonal variations of Mg+ are observed at latitudes between 20 and 40° and the density at the peak altitude ranges from 500 cm−3 to 4000 cm−3. The peak altitude of the ions shows a latitudinal dependence with a maximum at mid latitudes that is up to 10 km higher than the peak altitude at the equator. The SCIAMACHY measurements are compared to other measurements and WACCM model results. The WACCM results show a significant seasonal variability for Mg with a summer minimum, which is more clearly pronounced than for SCIAMACHY, and globally a higher peak density than the SCIAMACHY results. Although the peak density of both is not in agreement, the vertical column density agrees well, because SCIAMACHY and WACCM profiles have different

Raman-spectroscopic (Fe/Fe+Mg, CO2) and Structural studies of Mg-Fe cordierites

International Nuclear Information System (INIS)

Haefeker, U.

2013-01-01

-determination in cordierite do not consider the effects of peak-broadening and peak-overlaps as a consequence of Fe-incorporation so far. The accuracy of the determination method, which is based on the relation between the intensity ratios of two Si-O stretching vibrations and the CO 2 -peak was increased and correction factors for Fe-bearing samples were obtained. This lead to a significant reduction of the overall error. Improved calibration diagrams which are based on the data of 10 natural Mg-Fe-cordierites with XFe = 0.044-0.76 and CO 2 -contents of 0.12-1.97 wt.%. were obtained using the excitation wavelengths of 488, 515 und 633 nm and these correlation diagrams were then successfully applied to natural cordierite grains in thin sections from a granulite from the Sauwald, Upper Austria. Fe-incorporation leads to various changes within the structure of cordierite. The hexagonal and the orthorhombic polymorph of Fe-cordierite were investigated with Raman-spectroscopy and XRD methods and a detailed structural description was provided. X-ray diffraction of both synthetic Fe-cordierite polymorphs yielded a, c (hex) = 9.8801(16) Å, 9.2852(5) Å and a, b, c (ortho) = 17.2306(2) 20 Å, 9.8239(1) Å, 9.2892(1) Å. The crystal structure was then refined using single crystal data and the obtained structural properties have been compared to the Mg-end-member by focussing on the changes on the octahedral positions. Raman data of the hexagonal Fe-cordierite have also been provided and various peaks could be assigned to certain lattice vibrations by comparing them with the results of quantum-mechanical calculations for cordierite. (author) [de

Enhanced mechanical properties of an Al–Si–Cu–Mg alloy at 300 °C: Effects of Mg and the Q-precipitate phase

International Nuclear Information System (INIS)

Farkoosh, A.R.; Pekguleryuz, M.

2015-01-01

Strategies to improve the strength of Al–Si alloys at elevated temperatures can follow two routes: (i) improving the age-hardening behavior and/or (ii) producing effective dispersoid strengthening. In this study, the influence of Mg (in the range of 0.3–0.7 wt%) on the precipitation characteristics and mechanical properties of the Al–7Si–0.5Cu–(Mg) alloy was investigated. Thermodynamic calculations were performed via the CALPHAD method which showed that Q-Al 5 Mg 8 Cu 2 Si 6 is the main thermodynamically stable precipitate at 300 °C. The calculations were validated by transmission electron microscopy and differential scanning calorimetry analyses. Increasing the Mg level from 0.3 wt% to the maximum solubility limit of ∼0.5 wt% increased the amount of the Q-Al 5 Mg 8 Cu 2 Si 6 precipitates at 300 °C by ∼60 wt% and significantly improved the tensile strength and creep resistance at the expense of some ductility. Mg in excess of the solubility limit was seen to remain within the microstructure in the form of the large π-Al 8 FeMg 3 Si 6 and β-Mg 2 Si intermetallics after solution treatment at 530 °C. Cracking of the brittle π-Al 8 FeMg 3 Si 6 intermetallics during deformation was accounted for the decreased ductility of the alloys at high Mg levels. It is concluded that the Mg level can be increased to 0.5 wt% in the A–7Si–0.5Cu alloys to improve strength. However, for elevated temperature applications in which both strength and ductility are required (e.g. Diesel engine), modification of the π-Al 8 FeMg 3 Si 6 intermetallics would be required to improve the ductility of the alloys with high Mg contents

Magnesium balances and 28Mg studies in man

International Nuclear Information System (INIS)

Spencer, H.; Schwartz, R.; Osis, D.

1988-01-01

The intestinal absorption of magnesium was determined under strictly controlled dietary conditions in patients with normal renal function and also in patients with chronic renal failure. The average net absorption of magnesium of patients with normal renal function, expressed as percent of the magnesium intake, was 48.5%, while that of patients with chronic renal failure was significantly lower, 17%. Increasing the calcium intake from a low calcium intake of 200 mg/day to different higher intake levels up to 2000 mg/day did not change the magnesium balance nor the net absorption of magnesium of both types of patients. The lack of effect of the higher calcium intake on the absorption of magnesium was confirmed in 28 Mg studies in which an oral dose of 28 Mg, as the chloride, was given. The excretion of the absorbed magnesium into the intestine, the endogenous fecal magnesium, was low. Also, increasing the phosphorus intake up to 2000 mg/day in subjects with normal renal function did not affect the magnesium balance, regardless of the calcium intake

Post-Mesozoic Rapid Increase of Seawater Mg/Ca due to Enhanced Mantle-Seawater Interaction

Science.gov (United States)

Ligi, Marco; Bonatti, Enrico; Cuffaro, Marco; Brunelli, Daniele

2013-01-01

The seawater Mg/Ca ratio increased significantly from ~ 80 Ma to present, as suggested by studies of carbonate veins in oceanic basalts and of fluid inclusions in halite. We show here that reactions of mantle-derived peridotites with seawater along slow spreading mid-ocean ridges contributed to the post-Cretaceous Mg/Ca increase. These reactions can release to modern seawater up to 20% of the yearly Mg river input. However, no significant peridotite-seawater interaction and Mg-release to the ocean occur in fast spreading, East Pacific Rise-type ridges. The Mesozoic Pangean superocean implies a hot fast spreading ridge system. This prevented peridotite-seawater interaction and Mg release to the Mesozoic ocean, but favored hydrothermal Mg capture and Ca release by the basaltic crust, resulting in a low seawater Mg/Ca ratio. Continent dispersal and development of slow spreading ridges allowed Mg release to the ocean by peridotite-seawater reactions, contributing to the increase of the Mg/Ca ratio of post-Mesozoic seawater. PMID:24067442

Ursodeoxycholic acid pretreatment reduces oral bioavailability of the multiple drug resistance-associated protein 2 substrate baicalin in rats.

Science.gov (United States)

Wu, Tao; Li, Xi-Ping; Xu, Yan-Jiao; Du, Guang; Liu, Dong

2013-11-01

Baicalin is a major bioactive component of Scutellaria baicalensis and a substrate of multiple drug resistance-associated protein 2. Expression of multiple drug resistance-associated protein 2 is regulated by NF-E2-related factor 2. The aim of this study was to explore whether ursodeoxycholic acid, an NF-E2-related factor 2 activator, could influence the oral bioavailability of baicalin. A single dose of baicalin (200 mg/kg) was given orally to rats pretreated with ursodeoxycholic acid (75 mg/kg and 150 mg/kg, per day, intragastrically) or normal saline (per day, intragastrically) for six consecutive days. The plasma concentration of baicalin was measured with the HPLC method. The result indicated that the oral bioavailability of baicalin was significantly and dose-dependently reduced in rats pretreated with ursodeoxycholic acid. Compared with control rats, the mean area under concentration-time curve of baicalin was reduced from 13.25 ± 0.24 mg/L h to 7.62 ± 0.15 mg/L h and 4.97 ± 0.21 mg/L h, and the C(max) value was decreased from 1.31 ± 0.03 mg/L to 0.62 ± 0.05 mg/L and 0.36 ± 0.04 mg/L in rats pretreated with ursodeoxycholic acid at doses of 75 mg/kg and 150 mg/kg, respectively, for six consecutive days. Hence, ursodeoxycholic acid treatment reduced the oral bioavailability of baicalin in rats, probably due to the enhanced efflux of baicalin from the intestine and liver by multiple drug resistance-associated protein 2. Georg Thieme Verlag KG Stuttgart · New York.

Post-Mesozoic Rapid Increase of Seawater Mg/Ca due to Enhanced Mantle-Seawater Interaction

OpenAIRE

Marco Ligi; Enrico Bonatti; Marco Cuffaro; Daniele Brunelli

2013-01-01

The seawater Mg/Ca ratio increased significantly from ~ 80?Ma to present, as suggested by studies of carbonate veins in oceanic basalts and of fluid inclusions in halite. We show here that reactions of mantle-derived peridotites with seawater along slow spreading mid-ocean ridges contributed to the post-Cretaceous Mg/Ca increase. These reactions can release to modern seawater up to 20% of the yearly Mg river input. However, no significant peridotite-seawater interaction and Mg-release to the ...

Model study of ATP and ADP buffering, transport of Ca(2+) and Mg(2+), and regulation of ion pumps in ventricular myocyte

Science.gov (United States)

Michailova, A.; McCulloch, A.

2001-01-01

We extended the model of the ventricular myocyte by Winslow et al. (Circ. Res 1999, 84:571-586) by incorporating equations for Ca(2+) and Mg(2+) buffering and transport by ATP and ADP and equations for MgATP regulation of ion transporters (Na(+)-K(+) pump, sarcolemmal and sarcoplasmic Ca(2+) pumps). The results indicate that, under normal conditions, Ca(2+) binding by low-affinity ATP and diffusion of CaATP may affect the amplitude and time course of intracellular Ca(2+) signals. The model also suggests that a fall in ATP/ADP ratio significantly reduces sarcoplasmic Ca(2+) content, increases diastolic Ca(2+), lowers systolic Ca(2+), increases Ca(2+) influx through L-type channels, and decreases the efficiency of the Na(+)/Ca(2+) exchanger in extruding Ca(2+) during periodic voltage-clamp stimulation. The analysis suggests that the most important reason for these changes during metabolic inhibition is the down-regulation of the sarcoplasmic Ca(2+)-ATPase pump by reduced diastolic MgATP levels. High Ca(2+) concentrations developed near the membrane might have a greater influence on Mg(2+), ATP, and ADP concentrations than that of the lower Ca(2+) concentrations in the bulk myoplasm. The model predictions are in general agreement with experimental observations measured under normal and pathological conditions.

The effects of intranasal esketamine (84 mg) and oral mirtazapine (30 mg) on on-road driving performance: a double-blind, placebo-controlled study.

Science.gov (United States)

van de Loo, Aurora J A E; Bervoets, Adriana C; Mooren, Loes; Bouwmeester, Noor H; Garssen, Johan; Zuiker, Rob; van Amerongen, Guido; van Gerven, Joop; Singh, Jaskaran; der Ark, Peter Van; Fedgchin, Maggie; Morrison, Randall; Wajs, Ewa; Verster, Joris C

2017-11-01

The purpose of this study is to evaluate the single dose effect of intranasal esketamine (84 mg) compared to placebo on on-road driving performance. Mirtazapine (oral, 30 mg) was used as a positive control, as this antidepressant drug is known to negatively affect driving performance. Twenty-six healthy volunteers aged 21 to 60 years were enrolled in this study. In the evening, 8 h after treatment administration, participants conducted the standardized 100-km on-road driving test. Primary outcome measure was the standard deviation of lateral position (SDLP), i.e., the weaving of the car. Mean lateral position, mean speed, and standard deviation of speed were secondary outcome measures. For SDLP, non-inferiority analyses were conducted, using +2.4 cm (relative to placebo) as a predefined non-inferiority margin for clinical relevant impairment. Twenty-four participants completed the study. No significant SDLP difference was found between esketamine and placebo (p = 0.7638), whereas the SDLP after mirtazapine was significantly higher when compared to placebo (p = 0.0001). The upper limit of the two-sided 95% confidence interval (CI) of the mean difference between esketamine and placebo was +0.86 cm, i.e., deviation of speed, and mean lateral position were observed between the active treatments and placebo. No significant difference in driving performance was observed 8 h after administering intranasal esketamine (84 mg) or placebo. In contrast, oral mirtazapine (30 mg) significantly impaired on road driving performance.

Mindfulness significantly reduces self-reported levels of anxiety and depression

DEFF Research Database (Denmark)

Würtzen, Hanne; Dalton, Susanne Oksbjerg; Elsass, Peter

2013-01-01

INTRODUCTION: As the incidence of and survival from breast cancer continue to raise, interventions to reduce anxiety and depression before, during and after treatment are needed. Previous studies have reported positive effects of a structured 8-week group mindfulness-based stress reduction program...

Intraoperative ketamine reduces immediate postoperative opioid consumption after spinal fusion surgery in chronic pain patients with opioid dependency

DEFF Research Database (Denmark)

Nielsen, Rikke Vibeke; Fomsgaard, Jonna Storm; Siegel, Hanna

2017-01-01

Perioperative handling of surgical patients with opioid dependency represents an important clinical problem. Animal studies suggest that ketamine attenuates central sensitization and hyperalgesia and thereby reduces postoperative opioid tolerance. We hypothesized that intraoperative ketamine would...... to 24 hours postoperatively (visual analogue scale), adverse events, and persistent pain 6 months postoperatively. One hundred fifty patients were randomly assigned to intraoperative S-ketamine bolus 0.5 mg/kg and infusion 0.25 mg·kg·h or placebo. Postoperatively, patients received their usual opioids......, paracetamol and IV patient-controlled analgesia with morphine. In the final analyses, 147 patients were included. Patient-controlled analgesia IV morphine consumption 0 to 24 hours postoperatively was significantly reduced in the ketamine group compared with the placebo group: 79 (47) vs 121 (53) mg IV, mean...

Comparison Efficacy of Topical Piroxicam Gel and Lidocaine with Intravenous Pethidine in Reducing Pain during ESWL

Directory of Open Access Journals (Sweden)

F Mohammad Alibeigi

2011-06-01

Full Text Available Introduction & Objective: ESWL is a non-invasive method of breaking stones, using acoustic shock waves. Shock waves cause temporary deep visceral pain and discomfort in entry therefore, administration of sedatives is necessary. The purpose of this study was to compare the effect of topical lidocaine and piroxicam gel with intravenous pethidine in reducing pain during ESWL. Materials & Methods: This clinical trial study was performed on 159 patients who referred to Ayatollah Kashani Hospital in Shahrkord for ESWL in 2009. Patients were randomly divided into three-groups. For the first group, intravenous pethidine (0.5 mg/kg alone was administered. The second group received topical piroxicam, and the third group received topical lidocaine in the area of flank for half an hour before ESWL. During the operation, those patients who had unbearable pain, received another 0.5 mg/kg of pethidine. Data was collected using MC Gill questionnaires and analyzed using the SPSS software, using parametric, nonparametric methods and Dunn's Multiple Comparisons tests. Results: The mean of pain scores in the first group (pethidine was 6.2 ± 6.9 while these scores were 3.2 ± 2 .7 and 3.9 ± 3.1 for the second (piroxicam gel and third group (lidocaine gel respectively. The differences in the mean score of pain was significant in the pethidine group compared to the other groups (P <0.05. The average pethidin consumption were 24 ± 16 mg for the first group (pethidine, 10 ± 13 mg for the second group (piroxicam gel, and 5 ± 9 mg for the third group (lidocaine gel. The mean difference was significant in pethidine treated group in comparison with other two groups (P < 0.05. Conclusion: The use of topical piroxicam or lidocaine reduces pain in patients after ESWL It also reduces the need for sedative drugs.

High surface area niobium oxides as catalysts for improved hydrogen sorption properties of ball milled MgH2

International Nuclear Information System (INIS)

Bhat, V.V.; Rougier, A.; Aymard, L.; Nazri, G.A.; Tarascon, J.-M.

2008-01-01

We report, high surface area (up to 200 m 2 /g) nanocrystalline niobium oxide (so called p-Nb 2 O 5 ) synthesized by 'chimie douce' route and its importance in enhancing the hydrogen sorption properties of MgH 2 . p-Nb 2 O 5 induces faster kinetics than commonly used commercial Nb 2 O 5 (c-Nb 2 O 5 ) when ball milled with MgH 2 (named (MgH 2 ) catalyst ) by reducing the time of desorption from 35 min in (MgH 2 ) c-Nb 2 O 5 to 12 min in (MgH 2 ) p-Nb 2 O 5 at 300 deg. C. The BET surface area of as-prepared Nb 2 O 5 was tuned by heat treatment and its effect on sorption properties was studied. Among them, both p-Nb 2 O 5 and Nb 2 O 5 :350 (p-Nb 2 O 5 heated to 350 deg. C with a BET specific surface area of 46 m 2 /g) desorb 5 wt.% within 12 min, exhibiting the best catalytic activity. Furthermore, thanks to the addition of high surface area Nb 2 O 5 , the desorption temperature was successfully lowered down to 200 deg. C, with a significant amount of desorbed hydrogen (4.5 wt.%). In contrast, the composite (MgH 2 ) c-Nb 2 O 5 shows no desorption at this 'low' temperature

THE FAR-INFRARED EMISSION FROM THE Mg+-PAH SPECIES

International Nuclear Information System (INIS)

Bauschlicher, Charles W. Jr.; Ricca, Alessandra

2009-01-01

The far-infrared (FIR) spectra of several Mg + -PAH species are studied using density functional theory. The Mg + -PAH stretching mode, regardless of the polycyclic aromatic hydrocarbon (PAH) species, carries a reasonable intensity and tends to fall in a narrow range near 40 μm. Because the bands tend to fall at very similar frequencies, the average spectra of several Mg + -PAH species produce a broadband with an intensity that is about 20% of the well known C-H out-of-plane bending mode. In contrast, an average of seven large compact pure PAHs has no FIR bands that carry any significant intensity.

The effect of changing seawater Ca and Mg concentrations upon the distribution coefficients of Mg and Sr in the skeletons of the scleractinian coral Pocillopora damicornis

Science.gov (United States)

Giri, Sharmila J.; Swart, Peter K.; Devlin, Quinn B.

2018-02-01

The skeletal composition of calcifying organisms, in particular Mg/Ca and Sr/Ca ratios, have been widely used to understand fluctuations in seawater chemistry throughout the Phanerozoic. While the success of applying these data to the geologic record depends on a knowledge of the distribution coefficients for these elements (DMg and DSr), there are scarcely any studies which have described how these values vary as a result of changing seawater Mg/Ca ratios. To address this, we have cultured the scleractinian coral, Pocillopora damicornis, in seawater with ranges of Mg and Ca concentrations. Here, we demonstrate that Mg/Ca and Sr/Ca ratios of coral skeletons correlate with total seawater Mg/Ca and Sr/Ca molar ratios, but that apparent DMg and DSr values do not remain constant across the range of experimental seawater treatments, with DMg values significantly increasing with seawater Mg/Ca ratios and DSr values significantly increasing with seawater Ca concentrations. These trends are not rate dependent and may be best explained by a Rayleigh distillation model, in which the calcifying space is semi-isolated from seawater during skeletogenesis (i.e. leaky). As there is a slight increase in DMg and decrease in DSr values between our "Jurassic" and "Modern" seawater treatments, the application of a constant distribution coefficient to estimate changes in ancient seawater chemistry may underestimate seawater Mg/Ca ratios and overestimate Sr/Ca throughout the Mesozoic and Cenozoic. We suggest that interpretations of seawater chemistry from fossil corals may be improved by using the relationships derived for skeletal and seawater Mg/Ca and Sr/Ca ratios established by our experiments, as they incorporate the effect of seawater Mg/Ca ratios on skeletal Mg/Ca and Sr/Ca ratios.

Improving p-type doping efficiency in Al0.83Ga0.17N alloy substituted by nanoscale (AlN)5/(GaN)1 superlattice with MgGa-ON δ-codoping: Role of O-atom in GaN monolayer

Science.gov (United States)

Zhong, Hong-xia; Shi, Jun-jie; Zhang, Min; Jiang, Xin-he; Huang, Pu; Ding, Yi-min

2015-01-01

We calculate Mg-acceptor activation energy EA and investigate the influence of O-atom, occupied the Mg nearest-neighbor, on EA in nanoscale (AlN)5/(GaN)1 superlattice (SL), a substitution for Al0.83Ga0.17N disorder alloy, using first-principles calculations. We find that the N-atom bonded with Ga-atom is more easily substituted by O-atom and nMgGa-ON (n = 1-3) complexes are favorable and stable in the SL. The O-atom plays a dominant role in reducing EA. The shorter the Mg-O bond is, the smaller the EA is. The Mg-acceptor activation energy can be reduced significantly by nMgGa-ON δ-codoping. Our calculated EA for 2MgGa-ON is 0.21 eV, and can be further reduced to 0.13 eV for 3MgGa-ON, which results in a high hole concentration in the order of 1020 cm-3 at room temperature in (AlN)5/(GaN)1 SL. Our results prove that nMgGa-ON (n = 2,3) δ-codoping in AlN/GaN SL with ultrathin GaN-layer is an effective way to improve p-type doping efficiency in Al-rich AlGaN.

Improving p-type doping efficiency in Al0.83Ga0.17N alloy substituted by nanoscale (AlN5/(GaN1 superlattice with MgGa-ON δ-codoping: Role of O-atom in GaN monolayer

Directory of Open Access Journals (Sweden)

Hong-xia Zhong

2015-01-01

Full Text Available We calculate Mg-acceptor activation energy EA and investigate the influence of O-atom, occupied the Mg nearest-neighbor, on EA in nanoscale (AlN5/(GaN1 superlattice (SL, a substitution for Al0.83Ga0.17N disorder alloy, using first-principles calculations. We find that the N-atom bonded with Ga-atom is more easily substituted by O-atom and nMgGa-ON (n = 1-3 complexes are favorable and stable in the SL. The O-atom plays a dominant role in reducing EA. The shorter the Mg-O bond is, the smaller the EA is. The Mg-acceptor activation energy can be reduced significantly by nMgGa-ON δ-codoping. Our calculated EA for 2MgGa-ON is 0.21 eV, and can be further reduced to 0.13 eV for 3MgGa-ON, which results in a high hole concentration in the order of 1020 cm−3 at room temperature in (AlN5/(GaN1 SL. Our results prove that nMgGa-ON (n = 2,3 δ-codoping in AlN/GaN SL with ultrathin GaN-layer is an effective way to improve p-type doping efficiency in Al-rich AlGaN.

Safety, tolerability, and efficacy of a fixed-dose combination of olmesartan 40 mg and hydrochlorothiazide 12.5/25 mg in daily practice

Directory of Open Access Journals (Sweden)

Bramlage P

2013-08-01

Full Text Available Peter Bramlage,1 Claudia Zemmrich,1 Reinhard Ketelhut,2 Wolf-Peter Wolf,3 Eva-Maria Fronk,4 Roland E Schmieder5 1Institut für Pharmakologie und Präventive Medizin, Mahlow, Germany; 2Institut für Sportmedizin, Universitätsklinikum Charité, Humboldt Universität zu Berlin, Berlin, Germany; 3Daiichi Sankyo Deutschland GmbH, Munich, Germany; 4Daiichi Sankyo Europe GmbH, Munich, Germany; 5Universitätsklinikum Erlangen, Klinik für Nephrologie und Hypertensiologie, Erlangen, Germany Background: The safety and efficacy of olmesartan 40 mg and hydrochlorothiazide (HCTZ as a fixed-dose combination has been investigated in clinical trials leading to its approval. The aims of the present study were to confirm these data in an unselected patient population in daily practice and to determine the impact of physical activity on blood pressure control. Methods: In a multicenter, noninterventional study, 3,333 patients with either insufficient blood pressure control on olmesartan 40 mg alone or on a fixed/free combination of olmesartan 40 mg and HCTZ 12.5/25 mg were primarily assessed for safety and tolerability of the fixed-dose combination of olmesartan 40 mg and HCTZ 12.5/25 mg at 24 ± 2 weeks. Secondary objectives were blood pressure reduction, treatment compliance, and impact of physical activity as measured by the sum of weekly energy costs. Results: The mean patient age was 63.2 ± 11.46 years, mean baseline blood pressure was 159.6 ± 15.28/93.5 ± 9.52 mmHg, and 70.9% had at least one additional cardiovascular risk factor. Adverse drug reactions were rare (n = 19, and no serious adverse drug reactions occurred. Compliance with drug therapy was at least sufficient in more than 99% of patients at the end of the study. Blood pressure at the last available visit was reduced by 26.1 ± 15.5/13.0 ± 10.1 mmHg versus baseline (P < 0.0001, but had reduced effectiveness in patients ≥75 years with diabetes or impaired renal function. In 69% of patients

Reduced content of chloroatranol and atranol in oak moss absolute significantly reduces the elicitation potential of this fragrance material.

Science.gov (United States)

Andersen, Flemming; Andersen, Kirsten H; Bernois, Armand; Brault, Christophe; Bruze, Magnus; Eudes, Hervé; Gadras, Catherine; Signoret, Anne-Cécile J; Mose, Kristian F; Müller, Boris P; Toulemonde, Bernard; Andersen, Klaus Ejner

2015-02-01

Oak moss absolute, an extract from the lichen Evernia prunastri, is a valued perfume ingredient but contains extreme allergens. To compare the elicitation properties of two preparations of oak moss absolute: 'classic oak moss', the historically used preparation, and 'new oak moss', with reduced contents of the major allergens atranol and chloroatranol. The two preparations were compared in randomized double-blinded repeated open application tests and serial dilution patch tests in 30 oak moss-sensitive volunteers and 30 non-allergic control subjects. In both test models, new oak moss elicited significantly less allergic contact dermatitis in oak moss-sensitive subjects than classic oak moss. The control subjects did not react to either of the preparations. New oak moss is still a fragrance allergen, but elicits less allergic contact dermatitis in previously oak moss-sensitized individuals, suggesting that new oak moss is less allergenic to non-sensitized individuals. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Biocompatibility and bioactivity of porous polymer-derived Ca-Mg silicate ceramics.

Science.gov (United States)

Fiocco, L; Li, S; Stevens, M M; Bernardo, E; Jones, J R

2017-03-01

Magnesium is a trace element in the human body, known to have important effects on cell differentiation and the mineralisation of calcified tissues. This study aimed to synthesise highly porous Ca-Mg silicate foamed scaffolds from preceramic polymers, with analysis of their biological response. Akermanite (Ak) and wollastonite-diopside (WD) ceramic foams were obtained from the pyrolysis of a liquid silicone mixed with reactive fillers. The porous structure was obtained by controlled water release from selected fillers (magnesium hydroxide and borax) at 350°C. The homogeneous distribution of open pores, with interconnects of modal diameters of 160-180μm was obtained and maintained after firing at 1100°C. Foams, with porosity exceeding 80%, exhibited compressive strength values of 1-2MPa. In vitro studies were conducted by immersion in SBF for 21days, showing suitable dissolution rates, pH and ionic concentrations. Cytotoxicity analysis performed in accordance with ISO10993-5 and ISO10993-12 standards confirmed excellent biocompatibility of both Ak and WD foams. In addition, MC3T3-E1 cells cultured on the Mg-containing scaffolds demonstrated enhanced osteogenic differentiation and the expression of osteogenic markers including Collagen Type I, Osteopontin and Osteocalcin, in comparison to Mg-free counterparts. The results suggest that the addition of magnesium can further enhance the bioactivity and the potential for bone regeneration applications of Ca-silicate materials. Here, we show that the incorporation of Mg in Ca-silicates plays a significant role in the enhancement of the osteogenic differentiation and matrix formation of MC3T3-E1 cells, cultured on polymer-derived highly porous scaffolds. Reduced degradation rates and improved mechanical properties are also observed, compared to Mg-free counterparts, suggesting the great potential of Ca-Mg silicates as bone tissue engineering materials. Excellent biocompatibility of the new materials, in accordance to

Gemfibrozil Concentrations are Significantly Decreased in the Presence of Lopinavir/ritonavir

Science.gov (United States)

Busse, Kristin H.; Hadigan, Colleen; Chairez, Cheryl; Alfaro, Raul M.; Formentini, Elizabeth; Kovacs, Joseph A.; Penzak, Scott R.

2009-01-01

Objective: To determine the influence of a two-week course of lopinavir-ritonavir on the pharmacokinetics of the triglyceride-lowering agent, gemfibrozil. Methods: The study was conducted as an open label, single-sequence pharmacokinetic study in healthy human volunteers. Gemfibrozil pharmacokinetic parameter values were compared using a students t test after a single 600 mg dose was administered to healthy volunteers before, and after two weeks of lopinavir-ritonavir (400/100 mg) twice daily. Results: Fifteen healthy volunteers (8 males) completed the study. All study drugs were generally well-tolerated and no subjects withdrew participation. The geometric mean ratio (GMR, 90% CI) for gemfibrozil area under the plasma concentration-time curve (AUC0-∞) after 14 days of lopinavir-ritonavir compared to baseline was 0.59 (0.52, 0.67) (P gemfibrozil AUC0-∞ after lopinavir-ritonavir (range: −6% to −74%). The GMRs for gemfibrozil apparent oral clearance (Cl/F) and maximum concentration (Cmax) were 1.69 (1.41, 1.97) and 0.67 (0.49, 0.86) after 14 days of lopinavir-ritonavir versus baseline, respectively (P Gemfibrozil elimination half-life did not change after lopinavir-ritonavir administration (P = 0.60). Conclusion: Lopinavir/ritonavir significantly reduced the systemic exposure of gemfibrozil by reducing gemfibrozil absorption. Clinicians treating HIV-infected patients with hypertriglyceridemia should be aware of this drug interaction. PMID:19648824

Gemfibrozil concentrations are significantly decreased in the presence of lopinavir-ritonavir.

Science.gov (United States)

Busse, Kristin H; Hadigan, Colleen; Chairez, Cheryl; Alfaro, Raul M; Formentini, Elizabeth; Kovacs, Joseph A; Penzak, Scott R

2009-10-01

The objective of this study was to determine the influence of a 2-week course of lopinavir-ritonavir on the pharmacokinetics of the triglyceride-lowering agent, gemfibrozil. The study was conducted as an open label, single-sequence pharmacokinetic study in healthy human volunteers. Gemfibrozil pharmacokinetic parameter values were compared using a Student t test after a single 600-mg dose was administered to healthy volunteers before and after 2 weeks of lopinavir-ritonavir (400/100 mg) twice daily. Fifteen healthy volunteers (eight males) completed the study. All study drugs were generally well tolerated and no subjects withdrew participation. The geometric mean ratio (90% confidence interval) for gemfibrozil area under the plasma concentration-time curve after 14 days of lopinavir-ritonavir compared with baseline was 0.59 (0.52, 0.67) (P gemfibrozil area under the plasma concentration-time curve after lopinavir-ritonavir (range, -6% to -74%). The geometric mean ratios for gemfibrozil apparent oral clearance and maximum concentration were 1.69 (1.41, 1.97) and 0.67 (0.49, 0.86) after 14 days of lopinavir-ritonavir versus baseline, respectively (P Gemfibrozil elimination half-life did not change after lopinavir-ritonavir administration (P = 0.60). Lopinavir-ritonavir significantly reduced the systemic exposure of gemfibrozil by reducing gemfibrozil absorption. Clinicians treating HIV-infected patients with hypertriglyceridemia should be aware of this drug interaction.

Relativistic quasiparticle band structures of Mg2Si, Mg2Ge, and Mg2Sn: Consistent parameterization and prediction of Seebeck coefficients

Science.gov (United States)

Shi, Guangsha; Kioupakis, Emmanouil

2018-02-01

We apply density functional and many-body perturbation theory calculations to consistently determine and parameterize the relativistic quasiparticle band structures of Mg2Si, Mg2Ge, and Mg2Sn, and predict the Seebeck coefficient as a function of doping and temperature. The quasiparticle band gaps, including spin-orbit coupling effects, are determined to be 0.728 eV, 0.555 eV, and 0.142 eV for Mg2Si, Mg2Ge, and Mg2Sn, respectively. The inclusion of the semicore electrons of Mg, Ge, and Sn in the valence is found to be important for the accurate determination of the band gaps of Mg2Ge and Mg2Sn. We also developed a Luttinger-Kohn Hamiltonian and determined a set of band parameters to model the near-edge relativistic quasiparticle band structure consistently for all three compounds that can be applied for thermoelectric device simulations. Our calculated values for the Seebeck coefficient of all three compounds are in good agreement with the available experimental data for a broad range of temperatures and carrier concentrations. Our results indicate that quasiparticle corrections are necessary for the accurate determination of Seebeck coefficients at high temperatures at which bipolar transport becomes important.

Emission spectra of phosphor MgSO4 doped with Dy and Mn

International Nuclear Information System (INIS)

Zhang Chunxiang; Chen Lixin; Tang Qiang; Luo Daling; Qiu Zhiren

2001-01-01

Emission spectra of phosphor MgSO 4 doped with Dy and Dy/Mn were measured with an optical multichannel analyzer and a linear heating system whose temperature was controlled by a microcomputer. The emission spectrum bands at 480 nm and 580 nm of phosphor MgSO 4 doped with Dy were observed in the three dimensional (3D) glow curves. Compared with the 3D spectrum of CaSO 4 :Dy and the spectrum bands of MgSO 4 :Dy shows the same wavelengths which resulted from the quantum transitions among the energy levels of Dy 3 '+ ions. The intensities of the glow peaks in both spectrum bands (480 nm and 580 nm) of phosphor MgSO 4 doped with Dy/Mn were dramatically reduced except the 380 degree C glow peak

The microstructure and mechanical properties of Mg-3Al-3RE alloys

International Nuclear Information System (INIS)

Tian, X.; Wang, L.M.; Wang, J.L.; Liu, Y.B.; An, J.; Cao, Z.Y.

2008-01-01

The Mg-3Al-3RE alloys (RE, the cerium-rich or the yttrium-rich misch metal) were smelted in a resistance furnace under the protective flux from the Mg-RE master alloys and pure magnesium ingots. The microstructure and mechanical properties of samples prepared by steel mould casting method were investigated. Results show that the main phases of the alloys are α-Mg, Mg 17 Al 12 and Al-RE compounds, and the grain size reduced with the increasing content of the cerium-rich misch metal. Mg-3Al-2Ymm-1Cemm (Ymm, the yttrium-rich misch metal; Cemm, the Cerium-rich misch metal) exhibited the highest mechanical properties, that is UTS = 201 MPa and YS = 75 MPa, and ε = 8.2% at room temperature; UTS = 146 MPa, and YS = 70 MPa, ε = 18.2% at the temperature of 150 deg. C, respectively. Fracture surface analysis revealed that the Mg-3Al-2Ymm-1Cemm alloy has a mixed fracture feature at room temperature but ductile fracture at elevated temperature (150 deg. C)

Next-generation nozzle check valve significantly reduces operating costs

Energy Technology Data Exchange (ETDEWEB)

Roorda, O. [SMX International, Toronto, ON (Canada)

2009-01-15

Check valves perform an important function in preventing reverse flow and protecting plant and mechanical equipment. However, the variety of different types of valves and extreme differences in performance even within one type can change maintenance requirements and life cycle costs, amounting to millions of dollars over the typical 15-year design life of piping components. A next-generation non-slam nozzle check valve which prevents return flow has greatly reduced operating costs by protecting the mechanical equipment in a piping system. This article described the check valve varieties such as the swing check valve, a dual-plate check valve, and nozzle check valves. Advancements in optimized design of a non-slam nozzle check valve were also discussed, with particular reference to computer flow modelling such as computational fluid dynamics; computer stress modelling such as finite element analysis; and flow testing (using rapid prototype development and flow loop testing), both to improve dynamic performance and reduce hydraulic losses. The benefits of maximized dynamic performance and minimized pressure loss from the new designed valve were also outlined. It was concluded that this latest non-slam nozzle check valve design has potential applications in natural gas, liquefied natural gas, and oil pipelines, including subsea applications, as well as refineries, and petrochemical plants among others, and is suitable for horizontal and vertical installation. The result of this next-generation nozzle check valve design is not only superior performance, and effective protection of mechanical equipment but also minimized life cycle costs. 1 fig.

Pharmacokinetic characterization of three novel 4-mg nicotine lozenges
.

Science.gov (United States)

Sukhija, Manpreet; Srivastava, Reena; Kaushik, Aditya

2018-03-01

Nicotine replacement therapy (NRT) increases the probability of smoking cessation. This study was conducted to determine if three prototype 4-mg nicotine lozenges produced locally in India were bioequivalent to a globally marketed reference product, Nicorette® 4-mg nicotine lozenge. Healthy adult smokers (N = 39) were treated with three prototype 4-mg nicotine lozenges in comparison with a reference 4-mg lozenge in this single-center, randomized, open-label, single-dose, 4-way crossover study. Pharmacokinetic sampling was obtained to test for bioequivalence using maximal plasma concentration (Cmax) and extent of absorption (AUC0-t). Secondarily, AUC;0-∞, time to maximal plasma concentration (tmax), half-life (T1/2), elimination rate constant (Kel), and safety of the prototype lozenges versus the reference lozenge were compared. Each prototype 4-mg nicotine lozenge was found to be bioequivalent to the reference 4-mg nicotine lozenge based on the ratio of geometric means and 90% confidence intervals for Cmax, AUC0-t, and AUC;0-∞. Although tmax; was significantly longer for prototype III, all four lozenges achieved maximum plasma nicotine concentrations at a median of 1.5 hours. The safety profiles of the three prototype 4-mg lozenges did not differ from that of the 4-mg reference product. Each prototype 4-mg nicotine lozenge was bioequivalent to the reference 4-mg nicotine lozenge and was well tolerated. Furthermore, as these bioequivalent prototypes differed in in-vitro dissolution profiles, these data suggest that performance from the in -vitro method deployed is not a firm predictor of pharmacokinetic behavior.
.

Wound healing effect of bioactive ion released from Mg-smectite.

Science.gov (United States)

Sasaki, Yu; Sathi, Gulsan Ara; Yamamoto, Osamu

2017-08-01

Bioactive ions like Mg 2+ and Si 4+ have been known as promotion factors of tissue regeneration. In the present work, Mg-smectite, consisting of Mg 2+ and Si 4+ ions, was synthesized by a solution process, and evaluated for the efficiency of the powder on wound healing in rats. White precipitates were obtained by mixing a magnesium chloride hexahydrate solution and a sodium silicate hexahydrate solution at room temperature. The precipitates mixed with a NaOH aqueous solution were subjected to hydrothermal reaction, and finally crystalline Mg-smectite powder was obtained. The crystal and molecular structure of Mg-smectite was identified by X-ray diffractometry (XRD) and Fourier-transform infrared spectroscopy (FT-IR). The synthesized material was determined to be crystalline Mg-smectite. The amount of Mg 2+ and Si 4+ ions released from Mg-smectite in physiological saline was analyzed by inductively coupled plasma mass spectroscopy (ICP-MS). The total amount of Si 4+ ion released from Mg-smectite was greater than that of Mg 2+ ion. To evaluate the wound healing effect of Mg-smectite, Mg-smectite powder was applied to a full-thickness surgical wound reaching the subcutaneous tissue in the rat's abdomen. At 1 and 2weeks, skin tissue was collected and subjected to histological analysis. The results for skin regeneration showed no significant difference in wound size between the control and Mg-smectite group. However, it was found that the neovascularization, collagen deposition, and maturation were notedly accelerated by applying Mg-smectite powder in comparison with the control. Mg-smectite can then be hypothesized to stimulate the regeneration of skin tissue by releasing Mg 2+ and Si 4+ ions. These results suggested that Mg-smectite could offer great potential as a wound dressing material. Copyright © 2017 Elsevier B.V. All rights reserved.

The Influencing Mechanisms of Sodium Hexametaphosphate on Chalcopyrite Flotation in the Presence of MgCl2 and CaCl2

Directory of Open Access Journals (Sweden)

Wanqing Li

2018-04-01

Full Text Available Sea water has been used in flotation plants, showing a promising way to save fresh water usage. Previous studies indicated that divalent salts in sea water played negative roles in chalcopyrite flotation, but not much work have been conducted to understand the eliminating mechanisms. This study systematically investigated the effects of divalent cations of Ca2+ and Mg2+ on natural flotability of chalcopyrite in the absence of collectors and frothers. The reduced recovery was mainly due to the adsorption of Mg and Ca hydroxyl complexes and precipitation on chalcopyrite surfaces, giving rise to a less hydrophobic surface. The addition of sodium hexametaphosphate (SHMP, however, significantly improved chalcopyrite recovery. Species calculation, contact angle, zeta potential, FTIR and XPS analyses were conducted to understand the influencing mechanisms of divalent ions and the beneficial effects of SHMP on chalcopyrite recovery. The primary mechanism was that SHMP prevented the adsorption of positively charged Mg and Ca compounds or precipitation with hydrophilic properties such as Mg(OH2 on chalcopyrite surfaces, confirmed by the Derjguin-Landau-Verwey-Overbeek (DLVO theory. Secondly, SHMP reacted with Mg2+ and Ca2+ to form dissolvable complexes, thereby declining the formation of insoluble Mg2+ and Ca2+ compounds or precipitation.

Stabilization of Reactive MgO Surfaces by Ni Doping

Science.gov (United States)

Mazheika, Aliaksei; Levchenko, Sergey V.

Ni-MgO solid solutions are promising materials for catalytic reduction of CO2 and dry reforming of CH4. To explain the catalytic activity, an ab initio study of Ni-substitutional defects in MgO (NiMg) has been performed. At first, the validation of the theory level was done. We compared results of CCSD(T) embedded-cluster calculations of NiMg formation energies and adsorption energies of CO, CO2 and H2 on them to the HSE(α) hybrid DFT functional with the fraction of the exact exchange α varied between 0 and 1. HSE(0.3) was found to be the best compromise in this study. Our periodic HSE(0.3) calculations show that NiMg defects are most stable at corner sites, followed by steps, and are least stable at (001) terraces. Thus, Ni-doping stabilizes stepped MgO surfaces. The dissociative adsorption of H2 on the terrace is found to be endothermic (+ 1 . 1 eV), whereas on (110) surface with NiMg it is highly exothermic (- 1 . 6 eV). Adsorbed CO2 is also significantly stabilized (- 0 . 6 vs. - 2 . 2 eV). These findings explain recent microcalorimetry measurements of H2 and CO2 adsorption at doped Ni-MgO samples. partially supported by UniCat (Deutsche Forschungsgemeinschaft).

Combination of Proteasomal Inhibitors Lactacystin and MG132 Induced Synergistic Apoptosis in Prostate Cancer Cells

Directory of Open Access Journals (Sweden)

Robert B. Shirley

2005-12-01

Full Text Available The proteasome inhibitor Velcade (bortezomib/PS-341 has been shown to block the targeted proteolytic degradation of short-lived proteins that are involved in cell maintenance, growth, division, and death, advocating the use of proteasomal inhibitors as therapeutic agents. Although many studies focused on the use of one proteasomal inhibitor for therapy, we hypothesized that the combination of proteasome inhibitors Lactacystin (AG Scientific, Inc., San Diego, CA and MG132 (Biomol International, Plymouth Meeting, PA may be more effective in inducing apoptosis. Additionally, this regimen would enable the use of sublethal doses of individual drugs, thus reducing adverse effects. Results indicate a significant increase in apoptosis when LNCaP prostate cancer cells were treated with increasing levels of Lactacystin, MG132, or a combination of sublethal doses of these two inhibitors. Furthermore, induction in apoptosis coincided with a significant loss of IKKα, IKKβ, and IKKγ proteins and NFκB activity. In addition to describing effective therapeutic agents, we provide a model system to facilitate the investigation of the mechanism of action of these drugs and their effects on the IKK-NFκB axis.

Enhanced mechanical properties of an Al–Si–Cu–Mg alloy at 300 °C: Effects of Mg and the Q-precipitate phase

Energy Technology Data Exchange (ETDEWEB)

Farkoosh, A.R., E-mail: amir.rezaeifarkoosh@mail.mcgill.ca; Pekguleryuz, M., E-mail: mihriban.pekguleryuz@mcgill.ca

2015-01-05

Strategies to improve the strength of Al–Si alloys at elevated temperatures can follow two routes: (i) improving the age-hardening behavior and/or (ii) producing effective dispersoid strengthening. In this study, the influence of Mg (in the range of 0.3–0.7 wt%) on the precipitation characteristics and mechanical properties of the Al–7Si–0.5Cu–(Mg) alloy was investigated. Thermodynamic calculations were performed via the CALPHAD method which showed that Q-Al{sub 5}Mg{sub 8}Cu{sub 2}Si{sub 6} is the main thermodynamically stable precipitate at 300 °C. The calculations were validated by transmission electron microscopy and differential scanning calorimetry analyses. Increasing the Mg level from 0.3 wt% to the maximum solubility limit of ∼0.5 wt% increased the amount of the Q-Al{sub 5}Mg{sub 8}Cu{sub 2}Si{sub 6} precipitates at 300 °C by ∼60 wt% and significantly improved the tensile strength and creep resistance at the expense of some ductility. Mg in excess of the solubility limit was seen to remain within the microstructure in the form of the large π-Al{sub 8}FeMg{sub 3}Si{sub 6} and β-Mg{sub 2}Si intermetallics after solution treatment at 530 °C. Cracking of the brittle π-Al{sub 8}FeMg{sub 3}Si{sub 6} intermetallics during deformation was accounted for the decreased ductility of the alloys at high Mg levels. It is concluded that the Mg level can be increased to 0.5 wt% in the A–7Si–0.5Cu alloys to improve strength. However, for elevated temperature applications in which both strength and ductility are required (e.g. Diesel engine), modification of the π-Al{sub 8}FeMg{sub 3}Si{sub 6} intermetallics would be required to improve the ductility of the alloys with high Mg contents.

Chondrogenic differentiation of ATDC5-cells under the influence of Mg and Mg alloy degradation

Energy Technology Data Exchange (ETDEWEB)

Martinez Sanchez, Adela H., E-mail: adela.martinez@hzg.de [Helmholtz-Zentrum Geesthacht, Institute of Material Research, Department for Structural Research on Macromolecules, Geesthacht (Germany); Feyerabend, Frank; Laipple, Daniel; Willumeit-Römer, Regine [Helmholtz-Zentrum Geesthacht, Institute of Material Research, Department for Structural Research on Macromolecules, Geesthacht (Germany); Weinberg, Annelie [Department of Orthopedics and Orthopedic Surgery, Medical University of Graz (Austria); Luthringer, Bérengère J.C. [Helmholtz-Zentrum Geesthacht, Institute of Material Research, Department for Structural Research on Macromolecules, Geesthacht (Germany)

2017-03-01

Biodegradable magnesium (Mg)-based materials are a potential alternative to permanent implants for application in children. Nevertheless effects of those materials on growth plate cartilage and chondrogenesis have not been previously evaluated. In vitro differentiation of ATDC5 cells was evaluated under the influence of pure Mg (PMg), Mg with 10 wt% of gadolinium (Mg-10Gd) and Mg with 2 wt% of silver (Mg-2Ag) degradation products (extracts) and direct cell culture on the materials. Gene expression showed an inhibitory effect on ATDC5 mineralization with the three extracts and a chondrogenic potential of Mg-10Gd. Cells cultured in Mg-10Gd and Mg-2Ag extracts showed the same proliferation and morphology than cells cultured in growth conditions. Mg-10Gd induced an increase in production of ECM and a bigger cell size, similar to the effects found with differentiation conditions. An increased metabolic activity was observed in cells cultured under the influence of Mg-10Gd extracts, indicated by an acidic pH during most of the culture period. After 7 days of culture on the materials, ATDC5 growth, distribution and ECM synthesis were higher on Mg-10Gd samples, followed by Mg-2Ag and PMg, which was influenced by the homogeneity and composition of the degradation layer. This study confirmed the tolerance of ATDC5 cells to Mg-based materials and a chondrogenic effect of Mg-10Gd. Further studies in vitro and in vivo are necessary to evaluate cell reactions to those materials, as well as the effects on bone growth and the biocompatibility of the alloying system in the body. - Highlights: • Degradation of PMg, and Mg-2Ag do not influence ATDC5 cells growth and chondrogenic redifferentiation. • Mg-10Gd enhances fast chondrogenic redifferentiation and expression of hyperthrophic markers on ATDC5 cells. • Further evaluation of the effects of PMg, Mg-10Gd and Mg-2Ag in vivo are necessary to confirm its potential for application in growing bones.

Chondrogenic differentiation of ATDC5-cells under the influence of Mg and Mg alloy degradation

International Nuclear Information System (INIS)

Martinez Sanchez, Adela H.; Feyerabend, Frank; Laipple, Daniel; Willumeit-Römer, Regine; Weinberg, Annelie; Luthringer, Bérengère J.C.

2017-01-01

Biodegradable magnesium (Mg)-based materials are a potential alternative to permanent implants for application in children. Nevertheless effects of those materials on growth plate cartilage and chondrogenesis have not been previously evaluated. In vitro differentiation of ATDC5 cells was evaluated under the influence of pure Mg (PMg), Mg with 10 wt% of gadolinium (Mg-10Gd) and Mg with 2 wt% of silver (Mg-2Ag) degradation products (extracts) and direct cell culture on the materials. Gene expression showed an inhibitory effect on ATDC5 mineralization with the three extracts and a chondrogenic potential of Mg-10Gd. Cells cultured in Mg-10Gd and Mg-2Ag extracts showed the same proliferation and morphology than cells cultured in growth conditions. Mg-10Gd induced an increase in production of ECM and a bigger cell size, similar to the effects found with differentiation conditions. An increased metabolic activity was observed in cells cultured under the influence of Mg-10Gd extracts, indicated by an acidic pH during most of the culture period. After 7 days of culture on the materials, ATDC5 growth, distribution and ECM synthesis were higher on Mg-10Gd samples, followed by Mg-2Ag and PMg, which was influenced by the homogeneity and composition of the degradation layer. This study confirmed the tolerance of ATDC5 cells to Mg-based materials and a chondrogenic effect of Mg-10Gd. Further studies in vitro and in vivo are necessary to evaluate cell reactions to those materials, as well as the effects on bone growth and the biocompatibility of the alloying system in the body. - Highlights: • Degradation of PMg, and Mg-2Ag do not influence ATDC5 cells growth and chondrogenic redifferentiation. • Mg-10Gd enhances fast chondrogenic redifferentiation and expression of hyperthrophic markers on ATDC5 cells. • Further evaluation of the effects of PMg, Mg-10Gd and Mg-2Ag in vivo are necessary to confirm its potential for application in growing bones.

A resonant absorption measurement in the reaction 26Mg(p, γ)27Al

NARCIS (Netherlands)

Leun, C. van der; Burhoven Jaspers, N.C.

1966-01-01

A resonant absorption measurement at the 1966 keV proton resonance in the reaction 26Mg(p, γ)27Al leads to an absolute determination of the resonance strength, (2J+1)ΓpΓγ/Γ, of 5.6±1.8 eV. Normalization of previously published strengths of 120 resonances in the reaction 26Mg(p, γ)27Al, reduces these

Corrosion properties of the Mg alloy coated with polypyrrole films

International Nuclear Information System (INIS)

Grubač, Zoran; Rončević, Ivana Škugor; Metikoš-Huković, Mirjana

2016-01-01

Highlights: • Electropolymerization of pyrrole on Mg-alloy surface in presence of salicylate. • Salicylate dual role in PPy deposition: passivation and electron transfer mediation. • Redox potential of salicylate corresponds to potential of PPy nucleation. • EIS and polarization corrosion studies of PPy coated Mg-alloy in Hanks’ solution. • Polypyrrole significantly slowdown Mg alloy corrosion in Hanks’ solution. - Abstract: In the present study the reactive surface of Mg alloy was coated with the nontoxic biocompatible polypyrrole (PPy) film synthesized by electrochemical oxidation from an aqueous salicylate solution. Salicylate ions prevent Mg dissolution and act as an electron transfer mediator during the PPy film nucleation, formation and growth on the alloy surface. Kinetics of the pyrrole polymerization as well as corrosion resistance of the PPy coated Mg alloy in the Hanks’ solution were investigated using dc electrochemical methods and electrochemical impedance spectroscopy (EIS). Characterization of the surface film was performed by optical and Fourier transform infrared spectroscopy (FTIR).

Elastic and Plastic Behavior of an Ultrafine-Grained Mg Reinforced with BN Nanoparticles

Science.gov (United States)

Trojanová, Zuzanka; Dash, Khushbu; Máthis, Kristián; Lukáč, Pavel; Kasakewitsch, Alla

2018-04-01

Pure microcrystalline magnesium (µMg) was reinforced with hexagonal boron nitride (hBN) nanoparticles and was fabricated by powder metallurgy process followed by hot extrusion. For comparison pure magnesium powder was consolidated by hot extrusion too. Both materials exhibited a significant fiber texture. Mg-hBN nanocomposites (nc) and pure Mg specimens were deformed between room temperature and 300 °C under tension and compression mode. The yield strength and ultimate tensile and compression strength as well as characteristic stresses were evaluated and reported. The tensile and compressive strengths of Mg-hBN nc are quiet superior in values compared to monolithic counterpart as well as Mg alloys. The compressive yield strength of µMg was recorded as 90 MPa, whereas the Mg-hBN nancomposite shows 125 MPa at 200 °C. The tensile yield strength of µMg was computed as 67 MPa which is quite lower as compared to Mg-hBN nanocomposite's value which was recorded as 157 MPa at 200 °C. Under tensile stress the true stress-strain curves are flat in nature, whereas the stress-strain curves observed in compression at temperatures up to 100 °C exhibited small local maxima at the onset of deformation followed by a significant work hardening.

A new potential AED, carisbamate, substantially reduces spontaneous motor seizures in rats with kainate-induced epilepsy

Science.gov (United States)

Grabenstatter, Heidi L.; Dudek, F. Edward

2010-01-01

Purpose Animal models with spontaneous epileptic seizures may be useful in the discovery of new antiepileptic drugs (AEDs). The purpose of the present study was to evaluate the efficacy of carisbamate on spontaneous motor seizures in rats with kainate-induced epilepsy. Methods Repeated, low-dose (5 mg/kg), intraperitoneal injections of kainate were administered every hour until each male Sprague-Dawley rat had experienced convulsive status epilepticus for at least 3 h. Five 1-month trials (n= 8–10 rats) assessed the effects of 0.3, 1, 3, 10 and 30 mg/kg carisbamate on spontaneous seizures. Each trial involved six AED-versus-vehicle tests comprised of carisbamate or 10% solutol-HS-15 treatments administered as intraperitoneal injections on alternate days with a recovery day between each treatment day. Results Carisbamate significantly reduced motor seizure frequency at doses of 10 and 30 mg/kg, and caused complete seizure cessation during the 6-h post-drug epoch in 7 of 8 animals at 30 mg/kg. The effects of carisbamate (0.3–30 mg/kg) on spontaneous motor seizures appeared dose dependent. Conclusions These data support the hypothesis that a repeated-measures, cross-over protocol in animal models with spontaneous seizures is an effective method for testing AEDs. Carisbamate reduced the frequency of spontaneous motor seizures in a dose-dependent manner, and was more effective than topiramate at reducing seizures in rats with kainate-induced epilepsy. PMID:18494790

Response of MG63 osteoblast-like cells onto polycarbonate membrane surfaces with different micropore sizes.

Science.gov (United States)

Lee, Sang Jin; Choi, Jin San; Park, Ki Suk; Khang, Gilson; Lee, Young Moo; Lee, Hai Bang

2004-08-01

Response of different types of cells on materials is important for the applications of tissue engineering and regenerative medicine. It is recognized that the behavior of the cell adhesion, proliferation, and differentiation on materials depends largely on surface characteristics such as wettability, chemistry, charge, rigidity, and roughness. In this study, we examined the behavior of MG63 osteoblast-like cells cultured on a polycarbonate (PC) membrane surfaces with different micropore sizes (0.2-8.0 microm in diameter). Cell adhesion and proliferation to the PC membrane surfaces were determined by cell counting and MTT assay. The effect of surface micropore on the MG63 cells was evaluated by cell morphology, protein content, and alkaline phosphatase (ALP) specific activity. It seems that the cell adhesion and proliferation were progressively inhibited as the PC membranes had micropores with increasing size, probably due to surface discontinuities produced by track-etched pores. Increasing micropore size of the PC membrane results in improved protein synthesis and ALP specific activity in isolated cells. There was a statistically significant difference (Pmicropore sizes. The MG63 cells also maintained their phenotype under conditions that support a round cell shape. RT-PCR analysis further confirmed the osteogenic phenotype of the MG63 cells onto the PC membranes with different micropore sizes. In results, as micropore size is getting larger, cell number is reduced and cell differentiation and matrix production is increased. This study demonstrated that the surface topography plays an important role for phenotypic expression of the MG63 osteoblast-like cells.

The Abundance of Mg in the Interstellar Medium

Science.gov (United States)

Fitzpatrick, Edward L.

1997-06-01

An empirical determination of the f-values of the far-UV Mg II λλ1239, 1240 lines is reported. The strong near-UV Mg II λλ2796, 2803 lines are generally highly saturated along most interstellar sight lines outside the local interstellar medium (ISM) and usually yield extremely uncertain estimates of Mg+ column densities in interstellar gas. Since Mg+ is the dominant form of Mg in the neutral ISM, and since Mg is expected to be a significant constituent of interstellar dust grains, the far-UV lines are critical for assessing the role of this important element in the ISM. This study consists of complete component analyses of the absorption along the lines of sight toward HD 93521 in the Galactic halo and ξ Persei and ζ Ophiuchi in the Galactic disk, including all four UV Mg+ lines and numerous other transitions. The three analyses yield consistent determinations of the λλ1239, 1240 f-values, with weighted means of (6.4 +/- 0.4) × 10-4 and (3.2 +/- 0.2) × 10-4, respectively. These results are a factor of ~2.4 larger than a commonly used theoretical estimate, and a factor of ~2 smaller than a recently suggested empirical revision. The effects of this result on gas- and dust-phase abundance measurements of Mg are discussed. Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, under NASA contract NAS5-2655. This Letter is dedicated to the memory of Professor Lyman Spitzer Jr. He was a great guy.

Intriguing model significantly reduces boarding of psychiatric patients, need for inpatient hospitalization.

Science.gov (United States)

2015-01-01

As new approaches to the care of psychiatric emergencies emerge, one solution is gaining particular traction. Under the Alameda model, which has been put into practice in Alameda County, CA, patients who are brought to regional EDs with emergency psychiatric issues are quickly transferred to a designated emergency psychiatric facility as soon as they are medically stabilized. This alleviates boarding problems in area EDs while also quickly connecting patients with specialized care. With data in hand on the model's effectiveness, developers believe the approach could alleviate boarding problems in other communities as well. The model is funded by through a billing code established by California's Medicaid program for crisis stabilization services. Currently, only 22% of the patients brought to the emergency psychiatric facility ultimately need to be hospitalized; the other 78% are able to go home or to an alternative situation. In a 30-day study of the model, involving five community hospitals in Alameda County, CA, researchers found that ED boarding times were as much as 80% lower than comparable ED averages, and that patients were stabilized at least 75% of the time, significantly reducing the need for inpatient hospitalization.

Performance of Mg-14Li-1Al-0.1Ce as anode for Mg-air battery

Energy Technology Data Exchange (ETDEWEB)

Ma, Yibin; Li, Deyu [School of Chemical Engineering and Technology, Harbin Institute of Technology, West Street No. 92, Harbin 150001 (China); Li, Ning [School of Chemical Engineering and Technology, Harbin Institute of Technology, West Street No. 92, Harbin 150001 (China); Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001 (China); Zhang, Milin; Huang, Xiaomei [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001 (China)

2011-02-15

In this research, a new Mg-air battery based on Mg-14Li-1Al-0.1Ce was prepared and the battery performance was investigated by constant current discharge test. The corrosion behavior of Mg, AZ31 and Mg-Li-Al-Ce were studied by self-corrosion rate measurement and potentiodynamic polarization measurement. The characteristics of Mg-Li-Al-Ce after discharge were investigated by electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results show that Mg-Li-Al-Ce is more active than Mg and AZ31. The self-corrosion rate is found to be in the order: Mg-Li-Al-Ce < Mg < AZ31. It has been observed that the Mg-air battery based on Mg-Li-Al-Ce offers higher operating voltage, anodic efficiency and capacity than those with Mg and AZ31. SEM and EIS results show that the discharge product of Mg-Li-Al-Ce is loosely adhered to the alloy surface, and thus Mg-Li-Al-Ce could keep high discharge activity during discharge. (author)

Comparing the use of Memantine with Dextromethorphan and Placebo to Reduce Pain before Orthopedic Surgery

Directory of Open Access Journals (Sweden)

Mehrdad Taheri

2017-12-01

Full Text Available Introduction: To compare the use of Memantine with Dextromethorphan and placebo to reduce pain after orthopedic surgery.Materials and Methods: The present study was a double-blind clinical trial including180 patients undergoing elective orthopedic surgery of the lower limbs. Patients were divided randomly into three groups of 60 patients each. The first group (Group M received 30 mg Memantine orally, the second group (Group D received 45 mg of Dextromethorphan and the third group (Group P received only placebo, two and a half hours before the operation. The intensity of pain (VAS score, sedation score, and nausea and vomiting were recorded postoperatively.Results: In this study, 60 patients were enrolled in each group. The total VAS (Visual Analogue Scale score was significantly lower among patients receiving Memantine and the satisfaction was significantly higher compared to the Dextromethorphan and placebo groups (P-value <0.001.Conclusion: The present study results indicate that Memantine has a relatively better outcome compared to Dextromethorphan or placebo in reducing the post surgical pain among patients undergoing orthopedic surgeries. It also reduced the need for post surgical opioid use and improved the patients’ satisfaction.  

Chondrogenic differentiation of ATDC5-cells under the influence of Mg and Mg alloy degradation.

Science.gov (United States)

Martinez Sanchez, Adela H; Feyerabend, Frank; Laipple, Daniel; Willumeit-Römer, Regine; Weinberg, Annelie; Luthringer, Bérengère J C

2017-03-01

Biodegradable magnesium (Mg)-based materials are a potential alternative to permanent implants for application in children. Nevertheless effects of those materials on growth plate cartilage and chondrogenesis have not been previously evaluated. In vitro differentiation of ATDC5 cells was evaluated under the influence of pure Mg (PMg), Mg with 10wt% of gadolinium (Mg-10Gd) and Mg with 2wt% of silver (Mg-2Ag) degradation products (extracts) and direct cell culture on the materials. Gene expression showed an inhibitory effect on ATDC5 mineralization with the three extracts and a chondrogenic potential of Mg-10Gd. Cells cultured in Mg-10Gd and Mg-2Ag extracts showed the same proliferation and morphology than cells cultured in growth conditions. Mg-10Gd induced an increase in production of ECM and a bigger cell size, similar to the effects found with differentiation conditions. An increased metabolic activity was observed in cells cultured under the influence of Mg-10Gd extracts, indicated by an acidic pH during most of the culture period. After 7days of culture on the materials, ATDC5 growth, distribution and ECM synthesis were higher on Mg-10Gd samples, followed by Mg-2Ag and PMg, which was influenced by the homogeneity and composition of the degradation layer. This study confirmed the tolerance of ATDC5 cells to Mg-based materials and a chondrogenic effect of Mg-10Gd. Further studies in vitro and in vivo are necessary to evaluate cell reactions to those materials, as well as the effects on bone growth and the biocompatibility of the alloying system in the body. Copyright © 2016 Elsevier B.V. All rights reserved.

Significant association between sulfate-reducing bacteria and uranium-reducing microbial communities as revealed by a combined massively parallel sequencing-indicator species approach.

Science.gov (United States)

Cardenas, Erick; Wu, Wei-Min; Leigh, Mary Beth; Carley, Jack; Carroll, Sue; Gentry, Terry; Luo, Jian; Watson, David; Gu, Baohua; Ginder-Vogel, Matthew; Kitanidis, Peter K; Jardine, Philip M; Zhou, Jizhong; Criddle, Craig S; Marsh, Terence L; Tiedje, James M

2010-10-01

Massively parallel sequencing has provided a more affordable and high-throughput method to study microbial communities, although it has mostly been used in an exploratory fashion. We combined pyrosequencing with a strict indicator species statistical analysis to test if bacteria specifically responded to ethanol injection that successfully promoted dissimilatory uranium(VI) reduction in the subsurface of a uranium contamination plume at the Oak Ridge Field Research Center in Tennessee. Remediation was achieved with a hydraulic flow control consisting of an inner loop, where ethanol was injected, and an outer loop for flow-field protection. This strategy reduced uranium concentrations in groundwater to levels below 0.126 μM and created geochemical gradients in electron donors from the inner-loop injection well toward the outer loop and downgradient flow path. Our analysis with 15 sediment samples from the entire test area found significant indicator species that showed a high degree of adaptation to the three different hydrochemical-created conditions. Castellaniella and Rhodanobacter characterized areas with low pH, heavy metals, and low bioactivity, while sulfate-, Fe(III)-, and U(VI)-reducing bacteria (Desulfovibrio, Anaeromyxobacter, and Desulfosporosinus) were indicators of areas where U(VI) reduction occurred. The abundance of these bacteria, as well as the Fe(III) and U(VI) reducer Geobacter, correlated with the hydraulic connectivity to the substrate injection site, suggesting that the selected populations were a direct response to electron donor addition by the groundwater flow path. A false-discovery-rate approach was implemented to discard false-positive results by chance, given the large amount of data compared.

Characterization of Al-Cu-Mg-Ag Alloy RX226-T8 Plate

Science.gov (United States)

Lach, Cynthia L.; Domack, Marcia S.

2003-01-01

aircraft wing and fuselage skin materials through the addition of silver to Al-Cu-Mg alloys based on Al 2519 chemistry [2]. Thermal stability of the resulting Al-Cu-Mg-Ag alloys, C415-T8 and C416-T8, was due to co-precipitation of the thermally stable . (AlCu) and ' (Al2Cu) strengthening phases [1-4]. The strength and toughness behavior was investigated for these alloys produced as 0.090-inch thick rolled sheet in the T8 condition and after various thermal exposures. The mechanical properties were shown to be competitive with conventional aircraft alloys, 2519-T8 and 2618-T8 [2]. During the Integral Airframe Structure (IAS) program, advanced aluminum alloys were examined for use in an integrally stiffened airframe structure where the skin and stiffeners would be machined from plate and extruded frames would be mechanically attached (see Figure 1) [5]. Advantages of integrally stiffened structure include reduced part count, and reduced assembly times compared to conventional built-up airframe structure. The near-surface properties of a thick plate are of significance for a machined integrally stiffened airframe structure since this represents the skin location. Properties measured at the mid-plane of the plate are more representative of the stiffener web. RX226 was developed to exploit strength-toughness improvements and thermal stability benefits of Al-Cu-Mg-Ag alloys in plate gages. This study evaluated the microstructure and properties of three gages of plate produced in the T8 condition.

Influence of Mg{sup 2+} doping on the structure and electrochemical performances of layered LiNi{sub 0.6}Co{sub 0.2-x}Mn{sub 0.2}Mg{sub x}O{sub 2} cathode materials

Energy Technology Data Exchange (ETDEWEB)

Huang, Zhenjun; Wang, Zhixing, E-mail: zxwang.csu@hotmail.com; Guo, Huajun; Li, Xinhai

2016-06-25

Introducing the Mg ion into host lattice is applied to improving the electrochemical performance of LiNi{sub 0.6}Co{sub 0.2}Mn{sub 0.2}O{sub 2}. The effect of Mg substitution for Co on the structure, morphology, electrochemical properties and Li{sup +} diffusion coefficients are investigated in details. Rietveld refinement results reveal that Mg is incorporated into the bulk lattice, which results in reduced cation mixing and expand c-lattice parameter. All Mg-doped sample exhibit better cycle and rate performances, although the Mg substitution for Co led to decreasing a part of capacity. The Li diffusion coefficients obtained by galvanostatic intermittent titration technique (GITT) are increased with increases of Mg content. - Highlights: • Mg-doped sample exhibits better electrochemical performance. • The change of crystal structure by Mg doping are studied. • The Mg doping improves the lithium ion diffusion coefficient.

Electronic structure of ferromagnet-insulator interfaces: Fe/MgO and Co/MgO

Energy Technology Data Exchange (ETDEWEB)

Mueller, M.

2007-07-11

In this thesis the electronic structure of Fe/MgO{sub x} and Co/MgO{sub x} ferromagnet-insulator interfaces, representing material systems which are widely used in magnetic tunnel junctions, is studied by means of spin- and angle-resolved photoemission spectroscopy. The photoemission studies focus particularly on the response of the ferromagnetic electronic system in contact with MgO of varying stoichiometries, as this reflects the mechanisms of metal-oxide bonding at real ferromagnet-insulator interfaces. The correlation between chemical bonding and electronic structure formation is analyzed by combining information from core- and valence-band photoemission spectroscopy. The spectral features are compared to band structure calculations, which are performed using the SPR-KKR method. The Fe/MgO and Co/MgO systems are prepared by molecular beam epitaxy under ultrahigh vacuum conditions on well-defined (4 x 6) GaAs(001) substrates. A structural analysis by means of low-energy electron diffraction (LEED) reveals their body-centered cubic crystalline structure, whereas the chemical characterization by Auger electron spectroscopy is used to quantify the chemical environment at the sample surfaces. The magnetic analysis, using the magneto-optical Kerr effect, reveals the uniaxial anisotropy of the ferromagnetic layers. A crucial parameter is given by the MgO degree of oxidation, which is addressed by means of core-level spectroscopy and quantified by suitable fitting procedures of the Mg 2p core level. The results of the photoemission experiments show, that the electronic structure of the Fe/MgO and Co/MgO ferromagnet/insulator interfaces and, consequently, the interfacial spin polarization are sensitively controlled by the interface chemistry. In particular, three distinct scenarios are identified: the nearly stoichiometric, the oxygen-deficient and the over-oxidized ferromagnet/MgO interface. Each case is defined by innate characteristics of the electronic structure at

Influence of MgO containing strontium on the structure of ceramic film formed on grain oriented silicon steel surface

Directory of Open Access Journals (Sweden)

Daniela C. Leite Vasconcelos

1999-07-01

Full Text Available The oxide layer formed on the surface of a grain oriented silicon steel was characterized by SEM and EDS. 3% Si steel substrates were coated by two types of slurries: one formed by MgO and water and other formed by MgO, water and SrSO4. The ceramic films were evaluated by SEM, EDS and X-ray diffraction. Depth profiles of Fe, Si and Mg were obtained by GDS. The magnetic core losses (at 1.7 Tesla, 60 Hz of the coated steel samples were evaluated as well. The use of MgO containing strontium reduced the volume fraction of forsterite particles beneath the outermost ceramic layer. It was observed a reduced magnetic core loss with the use of the slurry with MgO containing strontium.

Pulsed laser deposition of AlMgB₁₄ thin films

Energy Technology Data Exchange (ETDEWEB)

Britson, Jason Curtis [Iowa State Univ., Ames, IA (United States)

2008-11-18

Hard, wear-resistant coatings of thin film borides based on AlMgB₁₄ have the potential to be applied industrially to improve the tool life of cutting tools and pump vanes and may account for several million dollars in savings as a result of reduced wear on these parts. Past work with this material has shown that it can have a hardness of up to 45GPa and be fabricated into thin films with a similar hardness using pulsed laser deposition. These films have already been shown to be promising for industrial applications. Cutting tools coated with AlMgB₁₄ used to mill titanium alloys have been shown to substantially reduce the wear on the cutting tool and extend its cutting life. However, little research into the thin film fabrication process using pulsed laser deposition to make AlMgB₁₄ has been conducted. In this work, research was conducted into methods to optimize the deposition parameters for the AlMgB₁₄ films. Processing methods to eliminate large particles on the surface of the AlMgB₁₄ films, produce films that were at least 1m thick, reduce the surface roughness of the films, and improve the adhesion of the thin films were investigated. Use of a femtosecond laser source rather than a nanosecond laser source was found to be effective in eliminating large particles considered detrimental to wear reduction properties from the films. Films produced with the femtosecond laser were also found to be deposited at a rate 100 times faster than those produced with the nanosecond laser. However, films produced with the femtosecond laser developed a relatively high RMS surface roughness around 55nm. Attempts to decrease the surface roughness were largely unsuccessful. Neither increasing the surface temperature of the substrate during deposition nor using a double pulse to ablate the material was found to be extremely successful to reduce the surface roughness. Finally, the adhesion of the thin films to M2 tool steel

A better cure rate with 800 mg than with 400 mg clarithromycin regimens in one-week triple therapy for Helicobacter pylori infection in cigarette-smoking peptic ulcer patients.

Science.gov (United States)

Ishioka, Hidehiko; Mizuno, Motowo; Take, Susumu; Ishiki, Kuniharu; Nagahara, Yasuhiro; Yoshida, Tomowo; Okada, Hiroyuki; Yokota, Kenji; Oguma, Keiji

2007-01-01

In Helicobacter pylori eradication therapy, using a proton pump inhibitor plus amoxicillin and clarithromycin (PPI/AC regimen), the impact of the clarithromycin dose and smoking on efficacy is conflicting. Here, we compared the efficacy of 400 and 800 mg of clarithromycin in the regimen in relation to smoking in patients with peptic ulcer disease. We studied 601 H. pylori-positive patients with peptic ulcer disease who had received amoxicillin 750 mg and clarithromycin 200 or 400 mg together with lansoprazole 30 mg b.i.d. 305 patients were treated with a regimen containing 400 mg of clarithromycin (C400 group), and 296 patients with a regimen containing 800 mg (C800 group). Overall cure rates between the two groups were not significantly different, but the cure rate in the C800 group was significantly better than that in the C400 group among patients infected with clarithromycin-sensitive strains (p = 0.03). This difference could be attributed to differences among smokers versus non-smokers: the cure rate among smokers in the C800 group (91.0%) was better than that in the C400 group (80.0%, p = 0.003). 800 mg of clarithromycin is recommended in the PPI/AC regimen for patients who smoke and are infected with clarithromycin-sensitive H. pylori. 2007 S. Karger AG, Basel

FRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY

Directory of Open Access Journals (Sweden)

M. S. Kaiser

2014-12-01

Full Text Available The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were also studied using JMAK type analysis to see if there exists any correlation between the methods. Recrystallization fraction behavior between two methods the scandium added alloys show the higher variation due to precipitation hardening and higher recrystallization behavior. The scandium and zirconium as a combined shows the more variation due to formation of Al3(Sc, Zr precipitate. From the microstructure it is also observed that the base Al-Mg alloy attained almost fully re-crystallized state after annealing at 400 °C for 60 minutes

Investigation of the 26Mg(d, p)27Mg reaction

NARCIS (Netherlands)

Meurders, F.; Steld, A. van der

1974-01-01

The angular distributions of 31 protons groups from the 26Mg(d, p)27Mg reaction have been measured at Ed = 12.0 MeV with a split-pole magnetic spectrograph. Excitation energies have been determined for 29 bound states. Three new levels have been found. A DWBA analysis yields ln values for 19 levels;

Abnormal devitrification behavior and mechanical response of cold-rolled Mg-rich Mg-Cu-Gd metallic glasses

International Nuclear Information System (INIS)

Lee, J.I.; Kim, J.W.; Oh, H.S.; Park, J.S.; Park, E.S.

2016-01-01

Abnormal devitrification behavior and mechanical response of Mg 75 Cu 15 Gd 10 (relatively strong glass former with higher structural stability) and Mg 85 Cu 5 Gd 10 (relatively fragile glass former with lower structural stability) metallic glasses, fabricated by repeated forced cold rolling, have been investigated. When metallic glasses were cold-rolled up to a thickness reduction ratio of ∼33%, the heat of relaxation (ΔH relax. ) below T g of the cold-rolled specimens was reduced, which indicates the formation of local structural ordering via cold rolling due to stress-induced relaxation. The local structural ordering results in abnormal devitrification behavior, such as higher resistance of glass-to-supercooled liquid transition and delayed growth, in the following heat treatment due to increased nuclei density and pinning site. In particular, the fragility index, m, could assist in understanding structural stability and local structural variation by mechanical processing as well as compositional tuning. Indeed, we examine the shear avalanche size to rationalize the variation of the deformation unit size depending on the structural instability before and after cold rolling. The deformation mode in Mg 85 Cu 5 Gd 10 metallic glass might change from self-organized critical state to chaotic state by cold rolling, which results in unique hardening behavior under the condition for coexisting well distributed local structural ordering and numerous thinner shear deformed areas. These results would give us a guideline for atomic scale structural manipulation of metallic glasses, and help develop novel metallic glass matrix composites with optimal properties through effective mechanical processing as well as heat treatment.

A novel biodegradable nicotinic acid/calcium phosphate composite coating on Mg-3Zn alloy

Energy Technology Data Exchange (ETDEWEB)

Song, Yingwei, E-mail: ywsong@imr.ac.cn; Shan, Dayong; Han, En-Hou

2013-01-01

A novel biodegradable composite coating is prepared to reduce the biodegradation rate of Mg-3Zn alloy. The Mg-3Zn substrate is first immersed into 0.02 mol L{sup -1} nicotinic acid (NA) solution, named as vitamin B{sub 3}, to obtain a pretreatment film, and then the electrodeposition of calcium phosphate coating with ultrasonic agitation is carried out on the NA pretreatment film to obtain a NA/calcium phosphate composite coating. Surface morphology is observed by scanning electron microscopy (SEM). Chemical composition is determined by X-ray diffraction (XRD) and EDX. Protection property of the coatings is evaluated by electrochemical tests. The biodegradable behavior is investigated by immersion tests. The results indicate that a thin but compact bottom layer can be obtained by NA pretreatment. The electrodeposition calcium phosphate coating consists of many flake particles and ultrasonic agitation can greatly improve the compactness of the coating. The composite coating is biodegradable and can reduce the biodegradation rate of Mg alloys in stimulated body fluid (SBF) for twenty times. The biodegradation process of the composite coating can be attributed to the gradual dissolution of the flake particles into chippings. - Highlights: Black-Right-Pointing-Pointer NA/calcium phosphate composite coating is prepared to protect Mg-3Zn alloy implant. Black-Right-Pointing-Pointer Nicotinic acid (vitamin B{sub 3}) is available to obtain a protective bottom film. Black-Right-Pointing-Pointer Ultrasonic agitation greatly improves the compactness of calcium phosphate coating. Black-Right-Pointing-Pointer The composite coating can reduce the biodegradation rate of Mg-3Zn twenty times. Black-Right-Pointing-Pointer The composite coating is biodegraded by the dissolution of flakes into chippings.

Dependence of magnetic anisotropy on MgO sputtering pressure in Co20Fe60B20/MgO stacks

Science.gov (United States)

Kaidatzis, A.; Serletis, C.; Niarchos, D.

2017-10-01

We investigated the dependence of magnetic anisotropy of Ta/Co20Fe60B20/MgO stacks on the Ar partial pressure during MgO deposition, in the range between 0.5 and 15 mTorr. The stacks are studied before and after annealing at 300°C and it is shown that magnetic anisotropy significantly depends on Ar partial pressure. High pressure results in stacks with very low perpendicular magnetic anisotropy even after annealing, while low pressure results in stacks with perpendicular anisotropy even at the as-deposited state. A monotonic increase of magnetic anisotropy energy is observed as Ar partial pressure is decreased.

Lime and Phosphate Amendment Can Significantly Reduce Uptake of Cd and Pb by Field-Grown Rice

Directory of Open Access Journals (Sweden)

Rongbo Xiao

2017-03-01

Full Text Available Agricultural soils are suffering from increasing heavy metal pollution, among which, paddy soil polluted by heavy metals is frequently reported and has elicited great public concern. In this study, we carried out field experiments on paddy soil around a Pb-Zn mine to study amelioration effects of four soil amendments on uptake of Cd and Pb by rice, and to make recommendations for paddy soil heavy metal remediation, particularly for combined pollution of Cd and Pb. The results showed that all the four treatments can significantly reduce the Cd and Pb content in the late rice grain compared with the early rice, among which, the combination amendment of lime and phosphate had the best remediation effects where rice grain Cd content was reduced by 85% and 61%, respectively, for the late rice and the early rice, and by 30% in the late rice grain for Pb. The high reduction effects under the Ca + P treatment might be attributed to increase of soil pH from 5.5 to 6.7. We also found that influence of the Ca + P treatment on rice production was insignificant, while the available Cd and Pb content in soil was reduced by 16.5% and 11.7%, respectively.

A Computational Investigation of Precipitates in Mg-RE Alloys With Applications To Mg-X Systems

Science.gov (United States)

Issa, Ahmed

Increasing fuel efficiency in transportation vehicles is a major policy goal for both government and auto and aerospace manufacturers. Lightweight structural materials, such as magnesium alloys, hold great promise in enabling such fuel efficiency gains. Understanding the controlling factors in Mg alloy strengthening is crucial for the rational design of structurally strong and inexpensive Mg alloys. In this work, we seek to understand the energetic underpinnings giving rise to a class of remarkably strong Mg alloys: Mg-RE systems. We use first-principles methods to efficiently explore seventeen Mg-RE systems, drawing out broad patterns and distilling our knowledge into simple design rules for Mg alloys. We begin by investigating the controlling factors for the Mg-strengthening prismatic plate precipitates in Mg-RE systems, discovering the critical role of strain in such systems. We then proceed to investigate the surprising role of interfacial energies in determining the course of the Mg-RE precipitation reactions. Using strain and interfacial energies, we construct a phase-field model which accurately depicts the precipitate morphology as a function of time and size in a Mg-Nd system. Finally, we combine our gained insights to implement a computational alloy design scheme on a large portion of the periodic table where we seek Mg-strengthening solutes. Our work advances the understanding of strengthening in Mg alloys and lays the groundwork for full scale computational alloy design.

The role of MgO content in ex situ MgB₂ wires

DEFF Research Database (Denmark)

Kovac, P.; Hugek, I.; Meligek, T.

2004-01-01

An experimental study of the effect of MgO content in the MgB2 powder used for ex situ made composite wires was carried out. Two single-core MgB2/Fe/Cu wires were made using commercial MgB2 powders from Alfa Aesar containing different fraction of MgO. Critical temperature and critical currents of...

Investigation of the 24Mg(d, p)25Mg reaction

NARCIS (Netherlands)

Meurders, F.; Korte, G. de

1975-01-01

Abstract Proton angular distributions from the 24Mg(d, p)25Mg reaction at Ed = 12.0 MeV have been measured with a split-pole magnetic spectrograph for Ex < 6 MeV at an average resolution (FWHM) of 7 keV. New ln values have been determined for three levels. A DWBA analysis yielded spectroscopic

Formation and Corrosion Resistance of Mg-Al Hydrotalcite Film on Mg-Gd-Zn Alloy

Science.gov (United States)

Ba, Z. X.; Dong, Q. S.; Kong, S. X.; Zhang, X. B.; Xue, Y. J.; Chen, Y. J.

2017-06-01

An environment-friendly technique for depositing a Mg-Al hydrotalcite (HT) (Mg6Al2(OH)16-CO3ṡ4H2O) conversion film was developed to protect the Mg-Gd-Zn alloy from corrosion. The morphology and chemical compositions of the film were analyzed by scanning electronic microscope (SEM) equipped with energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and Raman spectroscopy (RS), respectively. The electrochemical test and hydrogen evolution test were employed to evaluate the biocorrosion behavior of Mg-Gd-Zn alloy coated with the Mg-Al HT film in the simulated body fluid (SBF). It was found that the formation of Mg-Al HT film was a transition from amorphous precursor to a crystalline HT structure. The HT film can effectively improve the corrosion resistance of magnesium alloy. It indicates that the process provides a promising approach to modify Mg-Gd-Zn alloy.

Significant positive relationship between serum magnesium and muscle quality in maintenance hemodialysis patients.

Science.gov (United States)

Okazaki, Hisanori; Ishimura, Eiji; Okuno, Senji; Norimine, Kyoko; Yamakawa, Kenjiro; Yamakawa, Tomoyuki; Shoji, Shigeichi; Nishizawa, Yoshiki; Inaba, Masaaki

2013-01-01

Serum magnesium (Mg) levels have been associated with muscle performance in the general population. We hypothesized that serum Mg would be associated with muscle quality in hemodialysis patients. A total of 310 patients were examined (age: 58 ± 12 years, hemodialysis duration: 6.4 ± 6.0 years, 60.6% men, and 36.1% diabetics). Arm lean mass was measured by dual energy X-ray absorptiometry (DXA) on the dominant side. Arm muscle quality was defined as the ratio of the handgrip strength to the arm lean mass of the same side (kg/kg). Serum Mg was 1.15 ± 0.16 mmol/L (2.8 ± 0.4 mg/dL), being higher than the reference range of normal subjects. There was a significant negative correlation between muscle quality and age (r = -0.326, p<0.0001) and duration of hemodialysis (r = -0.253, p<0.0001). The muscle quality of the diabetics was significantly lower than that of the non-diabetics (p<0.001). There was a significant, positive correlation between muscle quality and serum Mg (r = 0.118, p<0.05), but not serum calcium or phosphate. In multiple regression analysis, age, gender, hemodialysis duration, diabetes, and serum Mg (β = 0.129, p<0.05) were significantly and independently associated with muscle quality (R(2) = 0.298, p<0.0001). These results demonstrated that a lower serum Mg concentration was significantly associated with poor muscle quality in hemodialysis patients. Further studies are needed to explore the mechanism by which lower serum Mg affects muscle quality.

Palonosetron and hydroxyzine pre-treatment reduces the objective signs of experimentally-induced acute opioid withdrawal in humans: a double-blinded, randomized, placebo-controlled crossover study.

Science.gov (United States)

Erlendson, Matthew J; D'Arcy, Nicole; Encisco, Ellen M; Yu, Jeffrey J; Rincon-Cruz, Lorena; Peltz, Gary; Clark, J David; Chu, Larry F

2017-01-01

Treatments for reducing opioid withdrawal are limited and prone to problematic side effects. Laboratory studies, clinical observations, and limited human trial data suggest 5-HT3-receptor antagonists and antihistamines may be effective. This double-blind, crossover, placebo-controlled study employing an acute physical dependence model evaluated whether (i) treatment with a 5-HT3-receptor antagonist (palonosetron) would reduce opioid withdrawal symptoms, and (ii) co-administration of an antihistamine (hydroxyzine) would enhance any treatment effect. At timepoint T = 0, healthy (non-opioid dependent, non-substance abuser) male volunteers (N = 10) were pre-treated with either a) placebo, b) palonosetron IV (0.75 mg), or c) palonosetron IV (0.75 mg) and hydroxyzine PO (100 mg) in a crossover study design. This was followed at T = 30 by intravenous morphine (10 mg/70kg). At T = 165, 10 mg/70kg naloxone IV was given to precipitate opioid withdrawal. The objective opioid withdrawal score (OOWS) and subjective opioid withdrawal score (SOWS) were determined 5 and 15 minutes after naloxone administration (T = 170, 180, respectively). Baseline measurements were recorded at T = -30 and T = -15. Comparison of average baseline OOWS scores with OOWS scores obtained 15 minutes after naloxone was significant (p = 0.0001). Scores from 15 minutes post-naloxone infusion showed significant differences in OOWS scores between treatment groups: placebo, 3.7 ± 2.4; palonosetron, 1.5 ± 0.97; and palonosetron with hydroxyzine, 0.2 ± 0.1333. Pretreatment with palonosetron significantly reduced many signs of experimentally-induced opioid withdrawal. Co-administration with hydroxyzine further reduced opioid withdrawal severity. These results suggest that 5-HT3 receptor antagonists, alone or in combination with an antihistamine, may be useful in the treatment of opioid withdrawal.

Incorporation of catalytic dehydrogenation into fischer-tropsch synthesis to significantly reduce carbon dioxide emissions

Science.gov (United States)

Huffman, Gerald P.

2012-11-13

A new method of producing liquid transportation fuels from coal and other hydrocarbons that significantly reduces carbon dioxide emissions by combining Fischer-Tropsch synthesis with catalytic dehydrogenation is claimed. Catalytic dehydrogenation (CDH) of the gaseous products (C1-C4) of Fischer-Tropsch synthesis (FTS) can produce large quantities of hydrogen while converting the carbon to multi-walled carbon nanotubes (MWCNT). Incorporation of CDH into a FTS-CDH plant converting coal to liquid fuels can eliminate all or most of the CO.sub.2 emissions from the water-gas shift (WGS) reaction that is currently used to elevate the H.sub.2 level of coal-derived syngas for FTS. Additionally, the FTS-CDH process saves large amounts of water used by the WGS reaction and produces a valuable by-product, MWCNT.

Structural, compositional, mechanical characterization and biological assessment of bovine-derived hydroxyapatite coatings reinforced with MgF_2 or MgO for implants functionalization

International Nuclear Information System (INIS)

Mihailescu, Natalia; Stan, G.E.; Duta, L.; Chifiriuc, Mariana Carmen; Bleotu, Coralia; Sopronyi, M.; Luculescu, C.; Oktar, F.N.; Mihailescu, I.N.

2016-01-01

Hydroxyapatite (HA) is a consecrated biomaterial for bone reconstruction. In the form of thin films deposited by pulsed laser technologies, it can be used to cover metallic implants aiming to increase biocompatibility and osseointegration rate. HA of animal origin (bovine, BHA) reinforced with MgF_2 (2 wt.%) or MgO (5 wt.%) were used for deposition of thin coatings with improved adherence, biocompatibility and antimicrobial activity. For pulsed laser deposition experiments, a KrF* (λ = 248 nm, τ_F_W_H_M ≤ 25 ns) excimer laser source was used. The deposited structures were characterized from a physical–chemical point of view by X-Ray Diffraction, Fourier Transform Infra-Red Spectroscopy, Scanning Electron Microscopy in top- and cross-view modes, Energy Dispersive X-Ray Spectroscopy and Pull-out adherence tests. The microbiological assay using the HEp-2 cell line revealed that all target materials and deposited thin films are non-cytotoxic. We conducted tests on three strains isolated from patients with dental implants failure, i.e. Microccocus sp., Enterobacter sp. and Candida albicans sp. The most significant anti-biofilm effect against Microcococcus sp. strain, at 72 h, was obtained in the presence of BHA:MgO thin films. For Enterobacter sp. strain a superior antimicrobial activity at 72 h was noticed, in respect with simple BHA or Ti control. The enhanced antimicrobial performances, correlated with good cytocompatibility and mechanical properties recommend these biomaterials as an alternative to synthetic HA for the fabrication of reliable implant coatings for dentistry and other applications. - Highlights: • Novel biological derived HA coatings fabricated by pulsed laser deposition. • Renewable resources • Reinforcement with MgF_2 and MgO improves the HA coatings' bonding strength. • Significant anti-biofilm effect obtained for MgO reinforced HA films. • Alternative low cost solutions for a new generation of dental implants.

Perbandingan Pemberian Ondansetron 8 mg dengan Tramadol 1 mg/ kgBB Intravena untuk Mencegah Menggigil Pascaanestesi Umum pada Operasi Mastektomi Radikal atau Modifikasi

Directory of Open Access Journals (Sweden)

Mirza Oktavian

2014-04-01

Full Text Available ost anesthetic shivering is a common complication of general anesthesia and preventable with several types of drugs. The aim of this study was to compare the efficacy of intravenous 8mg ondansetron versus tramadol 1 mg/kgBW in preventing post anesthetic shivering after general anesthesia. The research is a prospective, randomized double-blind controlled study involving 38 female patients aged 30–65 years at Dr. Hasan Sadikin Hospital Bandung period March–April 2012, American Society of Anesthesiologist (ASA physical status I–II, who underwent radical or modified mastectomy. Subjects were randomly divided into two groups. One group was given ondansetron 8 mg and the other group was given tramadol 1 mg/kgBW before surgical wound closure. Research results showed that incidence of post anesthetic shivering was less on tramadol group (15.8% compared to ondansetron (52.6% group, which is statistically significant (p<0.05. In conclusion, administration of tramadol 1 mg/kgBW intravenously is more effective in preventing post anesthetic shivering in radical or modified mastectomy.

Premedication with oral Dextromethorphan reduces intra-operative Morphine requirement

Directory of Open Access Journals (Sweden)

R Talakoub

2005-09-01

Full Text Available Background: Intra-operative pain has adverse effects on hemodynamic parameters. Due to complications of opioids for pain relief, using non-opioids medication is preferred. The purpose of this study was to investigate the effect of oral dextrometorphan premedication on intra-operative Morphine requirement. Methods: After approval of the Ethics committee and informed consent, 40 adult patients who stand in American Society of Anesthesiologists Physical Status I and II, under general anesthesia for elective laparatomy were selected and classified in two equal groups randomly. In group A, oral dextromethorphan (60mg was administered at 10 PM and 6 AM preoperatively. In group B, placebo (dextrose was administered. After induction of general anesthesia and before skin incision, intravenous morphine (0.01 mg/kg was administered. During surgery, when systolic blood pressure or heart rate was increased more than 20% of the preoperative baseline, 0.01 mg/kg morphine was administered. At the end of surgery, the totally prescribed morphine (mg/kg and maximal increase in systolic, diastolic, mean arterial blood pressure and heart rate relative to the baseline values were calculated and statistically compared with student’s t-test. Results: The mean dose of administered morphine during surgery was significantly less in group A than group B (P<0.0001. Also, Maximal increase in systolic, diastolic and mean arterial blood pressure was significantly less in group A (p<0.003, p<0.004, p<0.0001, respectively. There was no significant difference in maximal heart rate increase between two groups (p<0.114. Conclusion: Oral dextromethorphan premedication may decrease intra-operative morphine requirement and reduce maximal increase in systolic and mean arterial blood pressure during surgery. Key words: Dextromethorphan, Morphine, Intra-operative, Premedication Hemodynamic

High production rate of IBAD-MgO buffered substrate

Energy Technology Data Exchange (ETDEWEB)

Yoshizumi, M., E-mail: myoshizumi@istec.or.j [Superconductivity Research Laboratory, ISTEC, Shinonome 1-10-13, Koto-ku, Tokyo 135-0062 (Japan); Miyata, S.; Ibi, A.; Fukushima, H.; Yamada, Y.; Izumi, T.; Shiohara, Y. [Superconductivity Research Laboratory, ISTEC, Shinonome 1-10-13, Koto-ku, Tokyo 135-0062 (Japan)

2009-10-15

The conventional IBAD (Ion Beam Assisted Deposition) process using fluorite materials yields low production rates, resulting in high production cost, which reduces the motivation for practical application in spite of its high quality. The IBAD process using rock salt materials, e.g. MgO, is well known as a strong candidate of practical application due to its potential of high production rate and high in-plane grain alignment. In this work, the IBAD-MgO process was investigated for a newly developed architecture of PLD (Pulsed Laser Deposition)-CeO{sub 2}/sputter-LMO (LaMnO{sub 3})/IBAD-MgO/sputter-GZO (Gd{sub 2}Zr{sub 2}O{sub 7})/Hastelloy{sup TM} to make long buffered metal tapes with high properties and a high production rate. The 50 m-long IBAD-MgO substrates with about 4 deg. of DELTAphiCeO{sub 2} in an XRD phi scan could be fabricated repeatedly. A GdBCO (GdBa{sub 2}Cu{sub 3}O{sub x}) layer deposited on the buffered substrate showed the minimum I{sub c} value of 325 A/cm-w in a 41 m-long tape. Almost of the tape showed 500-600 A/cm-w of I{sub c} value. The deposition time for the IBAD-MgO layer was 60 s which was about 2 orders of magnitude shorter than the conventional IBAD process. The production rate of 24 m/h was realized at the IBAD-MgO process to fabricate the GdBCO coated conductor with high J{sub c} and I{sub c} properties.

Melting relations in the MgO-MgSiO3 system up to 70 GPa

Science.gov (United States)

Ohnishi, Satoka; Kuwayama, Yasuhiro; Inoue, Toru

2017-06-01

Melting experiments in a binary system MgO-MgSiO3 were performed up to 70 GPa using a CO2 laser heated diamond anvil cell. The quenched samples were polished and analyzed by a dualbeam focused ion beam (FIB) and a field emission scanning electron microscope (FE-SEM), respectively. The liquidus phase and the eutectic composition were determined on the basis of textual and chemical analyses of sample cross sections. Our experimental results show that the eutectic composition is the Si/Mg molar ratio of 0.76 at 35 GPa and it decreases with increasing pressure. Above 45 GPa, it becomes relatively constant at about 0.64-0.65 Si/Mg molar ratio. Using our experimental data collected at a wide pressure range up to 70 GPa together with previous experimental data, we have constructed a thermodynamic model of the eutectic composition of the MgO-MgSiO3 system. The eutectic composition extrapolated to the pressure and temperature conditions at the base of the mantle is about 0.64 Si/Mg molar ratio. The modeled eutectic composition is quite consistent with a previous prediction from ab initio calculations (de Koker et al. in Earth Planet Sci Lett 361:58-63, 2013), suggesting that the simple assumption of a non-ideal regular solution model can well describe the melting relation of the MgO-MgSiO3 system at high pressure. Our results show that the liquidus phase changes from MgO-periclase to MgSiO3-bridgmanite at 35 GPa for the simplified pyrolite composition ( 0.7 Si/Mg molar ratio), while MgSiO3-bridgmanite is the liquidus phase at the entire lower mantle conditions for the chondritic composition ( 0.84 Si/Mg molar ratio).

Reducing phosphorus loss in tile water with managed drainage in a claypan soil.

Science.gov (United States)

Nash, Patrick R; Nelson, Kelly A; Motavalli, Peter P; Nathan, Manjula; Dudenhoeffer, Chris

2015-03-01

Installing subsurface tile drain systems in poorly drained claypan soils to improve corn ( L.) yields could potentially increase environmental phosphorus (P) loss through the tile drainage system. The objectives of the study were to quantify the average concentration and loss of ortho-P in tile drain water from a claypan soil and to determine whether managed subsurface drainage (MD) could reduce ortho-P loss in tile water compared with free subsurface drainage (FD). Flow-weighted ortho-P concentration in the tile water was significantly lower with MD (0.09 mg L) compared with that of FD (0.15 mg L). Ortho-P loss in the tile water of this study was reduced with MD (36 g ha) by 80% compared with FD (180 g ha). Contrary to previous research, reduced ortho-P loss observed over the 4-yr study was not solely due to the reduced amount of water drained annually (63%) with MD compared with FD. During the spring period, when flow was similar between MD and FD, the concentration of ortho-P in the tile water generally was lower with MD compared with FD, which resulted in significantly less ortho-P loss with MD. We speculate that MD's ability to conserve water during the dry summer months increased corn's uptake of water and P, which reduced the amount of P available for leaching loss in the subsequent springs. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Effects of limestone, N, K and Mg fertilizers on Mg absorption by oats and barley

Energy Technology Data Exchange (ETDEWEB)

Alston, A M

1966-01-01

Oats grown in a pot experiment on two sandy loams were sampled at four stages of growth. Neither KCl nor MgSO/sub 4/. 7H/sub 2/O had any effect on yield but % Mg and total Mg uptake were consistently decreased by applying K and increased by applying Mg. Ca(NO/sub 3/)/sub 2/ increased % Mg more than did (NH/sub 4/)/sub 2/SO/sub 4/, but yield and total Mg uptake were higher where (NH/sub 4/)/sub 2/SO/sub 4/ was applied. The effects of fertilizers were similar on both soils. The effects of applying (NH/sub 4/)/sub 2/SO/sub 4/ and NaNO/sub 2/ to the soil on % Mg in barley were compared in a field experiment on an acid loam to which several rates of limestone had been applied. Treatments had no effect on the % Mg in grain or straw at maturity. At four earlier stages of growth (NH/sub 4/)/sub 2/SO)/sub 4/ increased % Mg in the plants more than did NaNO/sub 2/. Limestone slightly increased % Mg. Nitrification of NH/sub 4/ in the soil was rapid.

Impact of Mg content on native point defects in MgxZn1−xO (0 ≤ x ≤ 0.56

Directory of Open Access Journals (Sweden)

J. Perkins

2015-06-01

Full Text Available We used depth-resolved cathodoluminescence spectroscopy and surface photovoltage spectroscopy to measure the densities, energy levels, and spatial distributions of zinc/magnesium cation and oxygen vacancies in isostructural, single-phase, non-polar MgxZn1−xO alloys over a wide (0 ≤ x ≤ 0.56 range. Within this wide range, both defect types exhibit strong Mg content-dependent surface segregation and pronounced bulk density minima corresponding to unit cell volume minima, which can inhibit defect formation due to electrostatic repulsion. Mg in ZnO significantly reduces native defect densities and their non-polar surface segregation, both major factors in carrier transport and doping of these oxide semiconductors.

Exploring As-Cast PbCaSn-Mg Anodes for Improved Performance in Copper Electrowinning

Science.gov (United States)

Yuwono, Jodie A.; Clancy, Marie; Chen, Xiaobo; Birbilis, Nick

2018-06-01

Lead calcium tin (PbCaSn) alloys are the common anodes used in copper electrowinning (Cu EW). Given a large amount of energy consumed in Cu EW process, anodes with controlled oxygen evolution reaction (OER) kinetics and a lower OER overpotential are advantageous for reducing the energy consumption. To date, magnesium (Mg) has never been studied as an alloying element for EW anodes. As-cast PbCaSn anodes with the addition of Mg were examined herein, revealing an improved performance compared to that of the industrial standard PbCaSn anode. The alloy performances in the early stages of anode life and passivation were established from electrochemical studies which were designed to simulate industrial Cu EW process. The 24-hour polarization testing revealed that the Mg alloying depolarizes the anode potential up to 80 mV; thus, resulting in a higher Cu EW efficiency. In addition, scanning electron microscopy and X-ray photoelectron spectroscopy revealed that the alteration of the alloy microstructure and the corresponding interfacial reactions contribute to the changes of the anode electrochemical performances. The present study reveals for the first time the potency of Mg alloying in reducing the overpotential of PbCaSn anode.

Optimization of heat treatment parameters for additive manufacturing and gravity casting AlSi10Mg alloy

Science.gov (United States)

Girelli, L.; Tocci, M.; Montesano, L.; Gelfi, M.; Pola, A.

2017-11-01

Additive manufacturing of metals is a production process developed in the last few years to realize net shape components with complex geometry and high performance. AlSi10Mg is one of the most widely used aluminium alloys, both in this field and in conventional foundry processes, for its significant mechanical properties combined with good corrosion resistance. In this paper the effect of heat treatment on AlSi10Mg alloy was investigated. Solution and ageing treatments were carried out with different temperatures and times on samples obtained by direct metal laser sintering and gravity casting in order to compare their performance. Microstructural analyses and hardness tests were performed to investigate the effectiveness of the heat treatment. The results were correlated to the sample microstructure and porosity, analysed by means of optical microscopy and density measurements. It was found that, in the additive manufactured samples, the heat treatment can reduce significantly the performance of the alloy also because of the increase of porosity due to entrapped gas during the deposition technique and that the higher the solution temperature the higher the increase of such defects. A so remarkable effect was not found in the conventional cast alloy.

Effect of different seawater Mg

NARCIS (Netherlands)

Mewes, A.; Langer, G.; de Nooijer, L.J.; Bijma, J.; Reichart, G.J.

2014-01-01

Magnesium, incorporated in foraminiferal calcite (Mg/CaCC), is used intensively to reconstruct past seawater temperatures but, in addition to temperature, the Mg/CaCC of foraminiferal tests also depends on the ratio of Mg and Ca in seawater (Mg/CaSW). The physiological mechanisms responsible for

Solanum paniculatum root extract reduces diarrhea in rats

Directory of Open Access Journals (Sweden)

Jonh A.B. Tenório

Full Text Available Abstract Solanum paniculatum L., Solanaceae, locally known as "jurubeba", is widely used in Brazil for culinary purposes, and in folk medicine to treat of diverse disorder including gastric dysfunctions. In this study we investigated the antidiarrheal activity of S. paniculatum roots extract in rats at different concentrations (125, 250 and 500 mg/kg, p.o using different experimental models such as castor oil-induced diarrhea, enteropooling and gastrointestinal motility, determined by in vivo experimental models. The major compound of root extract was characterized as chlorogenic acid based in the IR, 1D and 2D NMR analysis. All the extract doses achieved antidiarrheal potency, as indicated by reduced weight of feces in castor oil-induced diarrhea, decreased intestinal motility and significantly inhibited castor oil-induced enteropooling compared to the vehicle group. The highest dose (500 mg/kg produced greater anti-motility effect and better reduction of enteropooling, similar to the reference drug Loperamide (5 mg/kg. Extract from S. paniculatum L. roots had antidiarrheal activity, as shown by the lower weight of the feces as well as decrease in the accumulation of intestinal fluid and slower transit, justifying the traditional use of plant for diarrhea.

A review of clinical efficacy and safety of canagliflozin 300 mg in the management of patients with type 2 diabetes mellitus

Directory of Open Access Journals (Sweden)

K M Prasanna Kumar

2017-01-01

Full Text Available Currently available antihyperglycemic agents, despite being effective, provide inadequate glycemic control and/or are associated with side effects or nonadherence. Canagliflozin, a widely used orally active inhibitor of sodium-glucose cotransporter 2 (SGLT2, is a new addition to the therapeutic armamentarium of glucose-lowering drugs. This review summarizes findings from different clinical and observational studies of canagliflozin 300 mg in patients with type 2 diabetes mellitus (T2DM. By inhibiting SGLT2, canagliflozin reduces reabsorption of filtered glucose, thereby increasing urinary glucose excretion in patients with T2DM. Canagliflozin 300 mg has been shown to be effective in lowering glycated hemoglobin, fasting plasma glucose, and postprandial glucose in patients with T2DM. Canagliflozin 300 mg also demonstrated significant reductions in body weight and blood pressure and has a low risk of causing hypoglycemia, when not used in conjunction with insulin and insulin secretagogues. Canagliflozin 300 mg was generally well tolerated in clinical studies. The most frequently reported adverse events include genital mycotic infections, urinary tract infections, osmotic diuresis, and volume depletion-related events.

Excessive sulfur supply reduces cadmium accumulation in brown rice (Oryza sativa L.)

International Nuclear Information System (INIS)

Fan Jianling; Hu Zhengyi; Ziadi, Noura; Xia Xu; Wu Congyanghui

2010-01-01

Human activities have resulted in cadmium (Cd) and sulfur (S) accumulation in paddy soils in parts of southern China. A combined soil-sand pot experiment was conducted to investigate the influence of excessive S supply on iron plaque formation and Cd accumulation in rice plants, using two Cd levels (0, 1.5 mg kg -1 ) combined with three S concentrations (0, 60, 120 mg kg -1 ). The results showed that excessive S supply significantly decreased Cd accumulation in brown rice due to the decrease of Cd availability and the increase of glutathione in rice leaves. But excessive S supply obviously increased Cd accumulation in roots due to the decrease of iron plaque formation on the root surface of rice. Therefore, excessive S supply may result in loss of rice yield, but it could effectively reduce Cd accumulation in brown rice exposed to Cd contaminated soils. - Excessive sulfur reduces cadmium accumulation in brown rice.

Structural stabilities and electronic properties of Mg28-nAln clusters: A first-principles study

Directory of Open Access Journals (Sweden)

Bao-Juan Lu

2017-09-01

Full Text Available In this paper, we have constructed the alloy configurations of Mg28-nAln by replacing atoms at various possible positions, starting from the stable structures of Mg28 and Al28 clusters. According to the symmetry of the cluster structure, the isomers of these initial structures have been screened with the congruence check, which would reduce computational hours and improve efficiency. Using the first-principles method, the structural evolution, mixing behavior and electronic properties of Mg28-nAln clusters are investigated for all compositions. We conclude that Al atoms prefer to reside in the central positions of Mg−Al clusters and Mg atoms tend to occupy the peripheral location. The negative mixing enthalpies imply the stabilities of these Mg-Al clusters and thus possible applications in catalysis and hydrogen storage materials. Among Mg28-nAln clusters, Mg24Al4, Mg21Al7, Mg14Al14, Mg26Al2 and Mg27Al1 present relatively high thermodynamic stabilities, and the electronic properties of these stable structures are discussed with the charge distributions around the Fermi level.

Corrosion behavior of die-cast Mg-4Al-2Sn-xCa alloy

Energy Technology Data Exchange (ETDEWEB)

Park, Kyung Chul; Kim, Byeong Ho; Kim, Kyung Ro [Defence Agency for Technology and Quality, Jinju (Korea, Republic of); Cho, Dae Hyun; Park, Ik Min [Pusan National University, Busan (Korea, Republic of)

2016-05-15

In the present work, the effect of Ca additions on microstructure and corrosion characteristics of high pressure die-cast Mg-4Al-2Sn alloy has been investigated. Mg-4Al-2Sn-xCa (x= 0, 0.3 and 0.7wt.%) alloy was prepared by using a high pressure die-casting method. Results indicated that the microstructure of Mg-4Al-2Sn alloy consisted of α-Mg, Mg{sub 17}Al{sub 12} and Mg{sub 2}Sn phase. With increase of Ca additions, CaMgSn phase was newly formed and grain size was sharply decreased. From the test results, the corrosion resistance of die-cast Mg-4Al-2Sn alloy was significantly improved by Ca addition. It is considered that stabilization of Mg(OH){sub 2} layer and refinements of microstructure with increase of Ca additions.

Comparative efficacies of oral ketoconazole and terbinafine for reducing Malassezia population sizes on the skin of Basset Hounds.

Science.gov (United States)

Guillot, Jacques; Bensignor, Emmanuel; Jankowski, François; Seewald, Wolfgang; Chermette, René; Steffan, Jean

2003-06-01

The objective of this study was to compare the efficacy of oral ketoconazole and terbinafine for reducing population sizes of Malassezia yeasts on canine skin. Twenty-one Basset Hounds were randomised in three groups of seven according to Malassezia populations. Dogs in the first group were treated by oral administration of ketoconazole (Ketofungol) 200 mg, Janssen-Cilag) at 10 mg x kg-1, every 24 h with food, for 3 weeks. Dogs in the second group were treated by oral administration of terbinafine (Lamisil) 250 mg, Novartis) at 30 mg x kg-1, every 24 h with food, for 3 weeks. The seven remaining dogs were used as controls. Malassezia population sizes were assessed by use of contact plates on four cutaneous sites at days 7, 14 and 21. Both ketoconazole and terbinafine were effective in reducing the baseline levels of Malassezia organisms with no significant difference between the two drugs. In further studies, oral terbinafine should be evaluated for the management of canine cases of Malassezia dermatitis.

Decay of a Jπ=36+ Resonance in the 24Mg+24Mg Reaction

International Nuclear Information System (INIS)

Salsac, M.-D.; Haas, F.; Courtin, S.

2005-01-01

For the 24 Mg+ 24 Mg reaction, striking narrow and correlated resonance structures have been observed previously in the excitation functions of the elastic and low-lying channels. In our study we have decided to focus on the resonance at E C M =45.7 MeV, which is known to have J π =36 + . Despite the very high excitation energy(∼60 MeV) in the 48 Cr composite system, this resonance has a narrow total width of 170 keV. To determine precisely which states in the inelastic 24 Mg channels carry away the resonance flux, an experiment, on the 24 Mg + 24 Mg reaction at energies On and OFF resonance, has been performed at the Legnaro Tandem accelerator using the Prisma fragment spectrometer associated with the CLARA γ array

Mg-Ca Alloys Produced by Reduction of CaO: Understanding of ECO-Mg Alloy Production

Science.gov (United States)

Jung, In-Ho; Lee, Jin Kyu; Kim, Shae K.

2017-04-01

There have been long debates about the environment conscious (ECO) Mg technology which utilizes CaO to produce Ca-containing Mg alloys. Two key process technologies of the ECO-Mg process are the chemical reduction of CaO by liquid Mg and the maintenance of melt cleanliness during the alloying of Ca. Thermodynamic calculations using FactSage software were performed to explain these two key issues. In addition, an experimental study was performed to compare the melt cleanliness of the Ca-containing Mg alloys produced by the conventional route with metallic Ca and the ECO-Mg route with CaO.

Interaction between FOXO1A-209 Genotype and Tea Drinking is Significantly Associated with Reduced Mortality at Advanced Ages

DEFF Research Database (Denmark)

Zeng, Yi; Chen, Huashuai; Ni, Ting

2016-01-01

Based on the genotypic/phenotypic data from Chinese Longitudinal Healthy Longevity Survey (CLHLS) and Cox proportional hazard model, the present study demonstrates that interactions between carrying FOXO1A-209 genotypes and tea drinking are significantly associated with lower risk of mortality...... at advanced ages. Such significant association is replicated in two independent Han Chinese CLHLS cohorts (p =0.028-0.048 in the discovery and replication cohorts, and p =0.003-0.016 in the combined dataset). We found the associations between tea drinking and reduced mortality are much stronger among carriers...... of the FOXO1A-209 genotype compared to non-carriers, and drinking tea is associated with a reversal of the negative effects of carrying FOXO1A-209 minor alleles, that is, from a substantially increased mortality risk to substantially reduced mortality risk at advanced ages. The impacts are considerably...

Positron annihilation study of formation of Mg vacancy in MgO

International Nuclear Information System (INIS)

Mizuno, M.; Araki, H.; Shirai, Y.; Inoue, Y.; Sugita, K.; Mizoguchi, T.; Tanaka, I.; Adachi, H.

2004-01-01

We have investigated the formation of Mg vacancy induced by ultra-dilute trivalent impurities in MgO by a combination of positron annihilation measurement and theoretical calculations of positron lifetimes. The undoped MgO yields the shortest positron lifetime of 130 ps that is shorter than that of 166 ps previously reported using a single crystal sample. The positron lifetime of the doped samples increases with the increase of the Al or Ga dopant concentration and is saturated at around 170 ps. This result indicates that the previously reported value of 166 ps is ascribed to not the bulk but the vacancy state induced by impurities. The experimental bulk lifetime of 130 ps, which is obtained by employing trapping model, is well reproduced by the theoretical calculation using the semiconductor model. The calculated defect lifetime is about 20 ps longer than the experimental value. This may be due to the lattice relaxation around Mg vacancy associated with the trapping of positrons. (orig.)

Positron annihilation study of formation of Mg vacancy in MgO

Energy Technology Data Exchange (ETDEWEB)

Mizuno, M.; Araki, H.; Shirai, Y. [Science and Technology Center for Atoms, Molecules and Ions Control, Osaka Univ., Osaka (Japan); Inoue, Y.; Sugita, K. [Dept. of Materials Science and Engineering, Osaka Univ., Osaka (Japan); Mizoguchi, T.; Tanaka, I.; Adachi, H. [Dept. of Materials Science and Engineering, Kyoto Univ., Kyoto (Japan)

2004-07-01

We have investigated the formation of Mg vacancy induced by ultra-dilute trivalent impurities in MgO by a combination of positron annihilation measurement and theoretical calculations of positron lifetimes. The undoped MgO yields the shortest positron lifetime of 130 ps that is shorter than that of 166 ps previously reported using a single crystal sample. The positron lifetime of the doped samples increases with the increase of the Al or Ga dopant concentration and is saturated at around 170 ps. This result indicates that the previously reported value of 166 ps is ascribed to not the bulk but the vacancy state induced by impurities. The experimental bulk lifetime of 130 ps, which is obtained by employing trapping model, is well reproduced by the theoretical calculation using the semiconductor model. The calculated defect lifetime is about 20 ps longer than the experimental value. This may be due to the lattice relaxation around Mg vacancy associated with the trapping of positrons. (orig.)

Induction-heating MOCVD reactor with significantly improved heating efficiency and reduced harmful magnetic coupling

KAUST Repository

Li, Kuang-Hui; Alotaibi, Hamad S.; Sun, Haiding; Lin, Ronghui; Guo, Wenzhe; Torres-Castanedo, Carlos G.; Liu, Kaikai; Galan, Sergio V.; Li, Xiaohang

2018-01-01

In a conventional induction-heating III-nitride metalorganic chemical vapor deposition (MOCVD) reactor, the induction coil is outside the chamber. Therefore, the magnetic field does not couple with the susceptor well, leading to compromised heating efficiency and harmful coupling with the gas inlet and thus possible overheating. Hence, the gas inlet has to be at a minimum distance away from the susceptor. Because of the elongated flow path, premature reactions can be more severe, particularly between Al- and B-containing precursors and NH3. Here, we propose a structure that can significantly improve the heating efficiency and allow the gas inlet to be closer to the susceptor. Specifically, the induction coil is designed to surround the vertical cylinder of a T-shaped susceptor comprising the cylinder and a top horizontal plate holding the wafer substrate within the reactor. Therefore, the cylinder coupled most magnetic field to serve as the thermal source for the plate. Furthermore, the plate can block and thus significantly reduce the uncoupled magnetic field above the susceptor, thereby allowing the gas inlet to be closer. The results show approximately 140% and 2.6 times increase in the heating and susceptor coupling efficiencies, respectively, as well as a 90% reduction in the harmful magnetic flux on the gas inlet.

Induction-heating MOCVD reactor with significantly improved heating efficiency and reduced harmful magnetic coupling

KAUST Repository

Li, Kuang-Hui

2018-02-23

In a conventional induction-heating III-nitride metalorganic chemical vapor deposition (MOCVD) reactor, the induction coil is outside the chamber. Therefore, the magnetic field does not couple with the susceptor well, leading to compromised heating efficiency and harmful coupling with the gas inlet and thus possible overheating. Hence, the gas inlet has to be at a minimum distance away from the susceptor. Because of the elongated flow path, premature reactions can be more severe, particularly between Al- and B-containing precursors and NH3. Here, we propose a structure that can significantly improve the heating efficiency and allow the gas inlet to be closer to the susceptor. Specifically, the induction coil is designed to surround the vertical cylinder of a T-shaped susceptor comprising the cylinder and a top horizontal plate holding the wafer substrate within the reactor. Therefore, the cylinder coupled most magnetic field to serve as the thermal source for the plate. Furthermore, the plate can block and thus significantly reduce the uncoupled magnetic field above the susceptor, thereby allowing the gas inlet to be closer. The results show approximately 140% and 2.6 times increase in the heating and susceptor coupling efficiencies, respectively, as well as a 90% reduction in the harmful magnetic flux on the gas inlet.

Coating of graphite flakes with MgO/carbon nanocomposite via gas state reaction

International Nuclear Information System (INIS)

Sharif, M.; Faghihi-Sani, M.A.; Golestani-Fard, F.; Saberi, A.; Soltani, Ali Khalife

2010-01-01

Coating of graphite flakes with MgO/carbon nanocomposite was carried out via gaseous state reaction between mixture of Mg metal, CO gas and graphite flakes at 1000 o C. XRD and FE-SEM analysis of coating showed that the coating was comprised of MgO nano particles and amorphous carbon distributed smoothly and covered the graphite surface evenly. Thermodynamic calculations were employed to predict the reaction sequences as well as phase stability. The effect of coating on water wettability and oxidation resistance of graphite was studied using contact angle measurement and TG analysis, respectively. It was demonstrated that the reaction between Mg and CO could result in MgO/C nanocomposite deposition. The coating improved water wettability of graphite and also enhanced the oxidation resistance of graphite flakes significantly. Also the graphite coating showed significant phenolic resin-wettabilty owing to high surface area of such hydrophilic nano composite coating. The importance of graphite coating is explained with emphasis on its potential application in graphite containing refractories.

Milling technological experiments to reduce Fusarium toxin contamination in wheat

Directory of Open Access Journals (Sweden)

Véha A.

2015-01-01

Full Text Available We examine 4 different DON-toxin-containing (0.74 - 1.15 - 1.19 - 2.14 mg/kg winter wheat samples: they were debranned and undebranned, and we investigated the flour’s and the by-products’ (coarse, fine bran toxin content changes. SATAKE lab-debranner was used for debranning and BRABENDER lab-mill for the milling process. Without debranning, two sample flours were above the DON toxin limit (0.75 mg/kg, which are waste. By minimum debranning (and minimum debranning mass loss; 6-8%, our experience with whole flour is that the multi-stage debranning measurement significantly reduces the content of the flour’s DON toxin, while the milling by-products, only after careful consideration and DON toxin measurements, may be produced for public consumption and for feeding.

Synthesis of Mg(OH)2, MgO, and Mg nanoparticles using laser ablation of magnesium in water and solvents

Energy Technology Data Exchange (ETDEWEB)

Tran, P.X.; Howard, B.H.; Martello, D.V.; Soong, Y.; Chyu, M.K.

2008-01-01

laser ablation of magnesium in deionized water (OW), solutions of OW and sodium dodecyl sulfate (50S) with different concentrations, acetone and 2-propanol has been conducted, The results showed that ablation in acetone and 2-propanol yielded MgO and Mg nanocrystallites as isolated particles and agglomerated chains probably intermixed with organic residues resulting from the alterationj decomposition of the solvents under the high-energy conditions. Brucite-like Mg(OH)2 particles were mainly produced by laser ablation of Mg in either OW or OW~SOS solutions. Ablation in OW yielded particles of fiber-like shapes having a diameter of about 5-lOnm and length as long as 150nm. Materials produced in DW-SOS solutions were composed of various size and shape particles, Some had rough surfaces with irregular shapes. Small particles were about 20-30nm and larger particles were about 120 nm. Particles with rod-like, triangular, and plate-like shapes were also observed.

Synthesis of Mg(OH) 2, MgO, and Mg nanoparticles using laser ablation of magnesium in water and solvents

Science.gov (United States)

Phuoc, Tran X.; Howard, Bret. H.; Martello, Donald V.; Soong, Yee; Chyu, Minking K.

2008-11-01

Laser ablation of magnesium in deionized water (DW), solutions of DW and sodium dodecyl sulfate (SDS) with different concentrations, acetone and 2-propanol has been conducted. The results showed that ablation in acetone and 2-propanol yielded MgO and Mg nanocrystallites as isolated particles and agglomerated chains probably intermixed with organic residues resulting from the alteration/decomposition of the solvents under the high-energy conditions. Brucite-like Mg(OH) 2 particles were mainly produced by laser ablation of Mg in either DW or DW-SDS solutions. Ablation in DW yielded particles of fiber-like shapes having a diameter of about 5-10 nm and length as long as 150 nm. Materials produced in DW-SDS solutions were composed of various size and shape particles. Some had rough surfaces with irregular shapes. Small particles were about 20-30 nm and larger particles were about 120 nm. Particles with rod-like, triangular, and plate-like shapes were also observed.

Soil contamination with silver nanoparticles reduces Bishop pine growth and ectomycorrhizal diversity on pine roots

Energy Technology Data Exchange (ETDEWEB)

Sweet, M. J., E-mail: m.sweet@derby.ac.uk [University of Derby, Environmental Sustainability Research Centre, College of Life and Natural Sciences (United Kingdom); Singleton, I. [Newcastle University, School of Biology (United Kingdom)

2015-11-15

Soil contamination by silver nanoparticles (AgNP) is of potential environmental concern but little work has been carried out on the effect of such contamination on ectomycorrhizal fungi (EMF). EMF are essential to forest ecosystem functions as they are known to enhance growth of trees by nutrient transfer. In this study, soil was experimentally contaminated with AgNP (0, 350 and 790 mg Ag/kg) and planted with Bishop pine seedlings. The effect of AgNP was subsequently measured, assessing variation in pine growth and ectomycorrhizal diversity associated with the root system. After only 1 month, the highest AgNP level had significantly reduced the root length of pine seedlings, which in turn had a small effect on above ground plant biomass. However, after 4 months growth, both AgNP levels utilised had significantly reduced both pine root and shoot biomass. For example, even the lower levels of AgNP (350 mg Ag/kg) soil, reduced fresh root biomass by approximately 57 %. The root systems of the plants grown in AgNP-contaminated soils lacked the lateral and fine root development seen in the control plants (no AgNP). Although, only five different genera of EMF were found on roots of the control plants, only one genus Laccaria was found on roots of plants grown in soil containing 350 mg AgNP/kg. At the higher levels of AgNP contamination, no EMF were observed. Furthermore, extractable silver was found in soils containing AgNP, indicating potential dissolution of silver ions (Ag+) from the solid AgNP.

Soil contamination with silver nanoparticles reduces Bishop pine growth and ectomycorrhizal diversity on pine roots

International Nuclear Information System (INIS)

Sweet, M. J.; Singleton, I.

2015-01-01

Soil contamination by silver nanoparticles (AgNP) is of potential environmental concern but little work has been carried out on the effect of such contamination on ectomycorrhizal fungi (EMF). EMF are essential to forest ecosystem functions as they are known to enhance growth of trees by nutrient transfer. In this study, soil was experimentally contaminated with AgNP (0, 350 and 790 mg Ag/kg) and planted with Bishop pine seedlings. The effect of AgNP was subsequently measured, assessing variation in pine growth and ectomycorrhizal diversity associated with the root system. After only 1 month, the highest AgNP level had significantly reduced the root length of pine seedlings, which in turn had a small effect on above ground plant biomass. However, after 4 months growth, both AgNP levels utilised had significantly reduced both pine root and shoot biomass. For example, even the lower levels of AgNP (350 mg Ag/kg) soil, reduced fresh root biomass by approximately 57 %. The root systems of the plants grown in AgNP-contaminated soils lacked the lateral and fine root development seen in the control plants (no AgNP). Although, only five different genera of EMF were found on roots of the control plants, only one genus Laccaria was found on roots of plants grown in soil containing 350 mg AgNP/kg. At the higher levels of AgNP contamination, no EMF were observed. Furthermore, extractable silver was found in soils containing AgNP, indicating potential dissolution of silver ions (Ag+) from the solid AgNP

Influence of annealing atmosphere on structural and superconducting properties of MgB{sub 2} thin films

Energy Technology Data Exchange (ETDEWEB)

Gregor, M., E-mail: gregor@fmph.uniba.sk; Plecenik, T.; Sobota, R.; Brndiarova, J.; Roch, T.; Satrapinskyy, L.; Kus, P.; Plecenik, A.

2014-09-01

Highlights: • Superconducting MgB{sub 2} thin film were deposited by co-deposition using the thermal and e-beam evaporation. • Ex situ annealing process was done using various atmospheres. • Influence of annealing atmosphere and temperature on superconducting and structural properties were studied. • Possible mechanisms of the formation and crystallization of MgB{sub 2} thin film are discussed. - Abstract: Influence of an ex situ annealing temperature and atmosphere on chemical composition and structural and superconducting properties of MgB{sub 2} thin films deposited by vacuum evaporation has been investigated. The annealing has been done in Ar, N{sub 2} and Ar + 5%H{sub 2} atmospheres at pressure of 700 Pa and temperature varying from 700 to 800 °C. It has been shown that annealing in Ar and N{sub 2} atmosphere at 700–800 °C produces relatively thick MgO layer on the surface of the films, while creation of such layer is highly reduced if the annealing is done in reducing Ar + 5%H{sub 2} atmosphere. The XPS and XRD results suggest that the MgO layer prevents out-diffusion of Mg from the film during the annealing, what assures better stoichiometry of the films as well as creation of larger MgB{sub 2} grains. The films with the highest amount of MgO on the surface, annealed in nitrogen atmosphere, thus paradoxically exhibited the highest critical temperature of T{sub c0} = 34.8 K with very sharp transition width of 0.1 K.

Influence of Heat Treatment on Biocorrosion and Hemocompatibility of Biodegradable Mg-35Zn-3Ca Alloy

Directory of Open Access Journals (Sweden)

Jeong-Hui Ji

2015-01-01

Full Text Available Mg-35Zn-3Ca (wt.% alloy containing nontoxic and biocompatible Zn and Ca as alloying elements was prepared and subjected to heat treatment and artificial aging for different duration of time to reduce its rate of degradation. Solution heat treatment was performed at 310°C while artificial aging was performed at 170°C for 0, 2.5, 5.0, 7.5, and 10.0 h and they were designated as AT0, AT1, AT2, AT3, and AT4, respectively. The finest and most homogenous reticulum was observed on the surface of the AT2 group. The result of immersion test in Hank’s balanced salt solution (HBSS showed that the corrosion rate of the AT2 group was 2.32 mg/(cm2 day, which was significantly lower as compared to other groups P<0.05. The hemolysis value was ≤5% in all groups, indicating no toxicity during short-term blood reaction.

Microstructural Evolution and Mechanical Properties in Superlight Mg-Li Alloy Processed by High-Pressure Torsion

Directory of Open Access Journals (Sweden)

Qian Su

2018-04-01

Full Text Available Microstructural evolution and mechanical properties of LZ91 Mg-Li alloy processed by high-pressure torsion (HPT at an ambient temperature were researched in this paper. The microstructure analysis demonstrated that significant grain refinement was achieved after HPT processing with an average grain size reducing from 30 μm (the as-received condition to approximately 230 nm through 10 turns. X-ray diffraction analysis revealed LZ91 alloy was consisted of α phase (hexagonal close-packed structure, hcp and β phase (body-centered cubic structure, bcc before and after HPT processing. The mean value of microhardness increased with the increasing number of HPT turns. This significantly increased hardness of specimens can be explained by Hall-Petch strengthening. Simultaneously, the distribution of microhardness along the specimens was different from other materials after HPT processing due to the different mechanical properties of two different phases. The mechanical properties of LZ91 alloy processed by HPT were assessed by the micro-tensile testing at 298, 373, 423, and 473 K. The results demonstrate that the ultra-fine grain LZ91 Mg-Li alloy exhibits excellent mechanical properties: tensile elongation is approximately 400% at 473 K with an initial strain rate of 1 × 10−2 s−1.

Concentration effect on inter-mineral equilibrium isotope fractionation: insights from Mg and Ca isotopic systems

Science.gov (United States)

Huang, F.; Wang, W.; Zhou, C.; Kang, J.; Wu, Z.

2017-12-01

Many naturally occurring minerals, such as carbonate, garnet, pyroxene, and feldspar, are solid solutions with large variations in chemical compositions. Such variations may affect mineral structures and modify the chemical bonding environment around atoms, which further impacts the equilibrium isotope fractionation factors among minerals. Here we investigated the effects of Mg content on equilibrium Mg and Ca isotope fractionation among carbonates and Ca content on equilibrium Ca isotope fractionation between orthopyroxene (opx) and clinopyroxene (cpx) using first-principles calculations. Our results show that the average Mg-O bond length increases with decreasing Mg/(Mg+Ca) in calcite when it is greater than 1/48[1] and the average Ca-O bond length significantly decreases with decreasing Ca/(Ca+Mg+Fe) in opx when it ranges from 2/16 to 1/48[2]. Equilibrium isotope fractionation is mainly controlled by bond strengths, which could be measured by bond lengths. Thus, 103lnα26Mg/24Mg between dolomite and calcite dramatically increases with decreasing Mg/(Mg+Ca) in calcite [1] and it reaches a constant value when it is lower than 1/48. 103lnα44Ca/40Ca between opx and cpx significantly increases with decreasing Ca content in opx when Ca/(Ca+Mg+Fe) ranges from 2/16 to 1/48 [2]. If Ca/(Ca+Mg+Fe) is below 1/48, 103lnα44Ca/40Ca is not sensitive to Ca content. Based on our results, we conclude that the concentration effect on equilibrium isotope fractionation could be significant within a certain range of chemical composition of minerals, which should be a ubiquitous phenomenon in solid solution systems. [1] Wang, W., Qin, T., Zhou, C., Huang, S., Wu, Z., Huang, F., 2017. GCA 208, 185-197. [2] Feng, C., Qin, T., Huang, S., Wu, Z., Huang, F., 2014. GCA 143, 132-142.

Hydrodechlorination of Tetrachloromethane over Palladium Catalysts Supported on Mixed MgF2-MgO Carriers

Directory of Open Access Journals (Sweden)

Magdalena Bonarowska

2016-11-01

Full Text Available Pd/MgO, Pd/MgF2 and Pd/MgO-MgF2 catalysts were investigated in the reaction of CCl4 hydrodechlorination. All the catalysts deactivated in time on stream, but the degree of deactivation varied from catalyst to catalyst. The MgF2-supported palladium with relatively large metal particles appeared the best catalyst, characterized by good activity and selectivity to C2-C5 hydrocarbons. Investigation of post-reaction catalyst samples allowed to find several details associated with the working state of hydrodechlorination catalysts. The role of support acidity was quite complex. On the one hand, a definite, although not very high Lewis acidity of MgF2 is beneficial for shaping high activity of palladium catalysts. The MgO-MgF2 support characterized by stronger Lewis acidity than MgF2 contributes to very good catalytic activity for a relatively long reaction period (~5 h but subsequent neutralization of stronger acid centers (by coking eliminates them from the catalyst. On the other hand, the role of acidity evolution, which takes place when basic supports (like MgO are chlorided during HdCl reactions, is difficult to assess because different events associated with distribution of chlorided support species, leading to partial or even full blocking of the surface of palladium, which plays the role of active component in HdCl reactions.

Clonidine Reduce Bleeding Of Endoscopic Sinus Surgery Amir Alam Hospital (1398-2000

Directory of Open Access Journals (Sweden)

Hajy Mohammadi F

2002-09-01

Full Text Available This study was conducted to evaluate effect of clonidine as a premedication on endoscopic sinus surgery bleeding."nMethods and Materials: during a randomized double blind clinical trial we compared two groups of patients who scheduled for endoscopic sinus surgery for polypectomy and etmoidectomy. 216 patients randomly assigned in two groups.In first group 2 hours befor surgery a 0.2mg tablet of clonidine orally adminestered to patients and in second group a 100 mg tablet of vit Bj(with same size and color- as"nplacebowas adminestered to patients. The amount of bleeding measured in two groups."nResults: mean bleeding volume in clonidine group was 113+76 ml and in control group was 211 + 113 ml. There was a significant statistical difference between two groups (pO.0001."nConclusion: Clonidine as premedication can reduce bleeding of endoscopic sinus surgery significantly.

A Recombinant Multi-Stage Vaccine against Paratuberculosis Significantly Reduces Bacterial Level in Tissues without Interference in Diagnostics

DEFF Research Database (Denmark)

Jungersen, Gregers; Thakur, Aneesh; Aagaard, C.

, PPDj-specific IFN-γ responses or positive PPDa or PPDb skin tests developed in vaccinees. Antibodies and cell-mediated immune responses were developed against FET11 antigens, however. At necropsy 8 or 12 months of age, relative Map burden was determined in a number of gut tissues by quantitative IS900...... PCR and revealed significantly reduced levels of Map and reduced histopathology. Diagnostic tests for antibody responses and cell-mediated immune responses, used as surrogates of infection, corroborated the observed vaccine efficacy: Five of seven non‐vaccinated calves seroconverted in ID Screen......-γ assay responses from 40 to 52 weeks compared to non-vaccinated calves. These results indicate the FET11 vaccine can be used to accelerate eradication of paratuberculosis while surveillance or test-and-manage control programs for tuberculosis and Johne’s disease remain in place. Funded by EMIDA ERA...

Influence of hydrogen impurities on p-type resistivity in Mg-doped GaN films

International Nuclear Information System (INIS)

Yang, Jing; Zhao, Degang; Jiang, Desheng; Chen, Ping; Zhu, Jianjun; Liu, Zongshun; Le, Lingcong; He, Xiaoguang; Li, Xiaojing; Zhang, Y. T.; Du, G. T.

2015-01-01

The effects of hydrogen impurities on p-type resistivity in Mg-doped GaN films were investigated. It was found that hydrogen impurities may have the dual role of passivating Mg Ga acceptors and passivating donor defects. A decrease in p-type resistivity when O 2 is introduced during the postannealing process is attributed to the fact that annealing in an O 2 -containing environment can enhance the dissociation of Mg Ga -H complexes as well as the outdiffusion of H atoms from p-GaN films. However, low H concentrations are not necessarily beneficial in Mg-doped GaN films, as H atoms may also be bound at donor species and passivate them, leading to the positive effect of reduced compensation

Intrinsic Conductivity in Magnesium-Oxygen Battery Discharge Products: MgO and MgO2

DEFF Research Database (Denmark)

Smith, Jeffrey G.; Naruse, Junichi; Hiramatsu, Hidehiko

2017-01-01

Nonaqueous magnesium–oxygen (or “Mg-air”) batteries are attractive next generation energy storage devices due to their high theoretical energy densities, projected low cost, and potential for rechargeability. Prior experiments identified magnesium oxide, MgO, and magnesium peroxide, MgO2...

Structural, compositional, mechanical characterization and biological assessment of bovine-derived hydroxyapatite coatings reinforced with MgF{sub 2} or MgO for implants functionalization

Energy Technology Data Exchange (ETDEWEB)

Mihailescu, Natalia [National Institute for Lasers, Plasma and Radiation Physics, Magurele RO-077125 (Romania); Stan, G.E. [National Institute of Materials Physics, Magurele RO-077125 (Romania); Duta, L. [National Institute for Lasers, Plasma and Radiation Physics, Magurele RO-077125 (Romania); Chifiriuc, Mariana Carmen [Department of Microbiology, Faculty of Biology, Bucharest RO-060101 (Romania); Bleotu, Coralia [Stefan S. Nicolau Institute of Virology, 85 Mihai Bravu Avenue, Bucharest RO-030304 (Romania); Sopronyi, M.; Luculescu, C. [National Institute for Lasers, Plasma and Radiation Physics, Magurele RO-077125 (Romania); Oktar, F.N. [Department of Bioengineering, Faculty of Engineering, Marmara University, Goztepe, Istanbul TR-34722 (Turkey); Advance Nanomaterials Research Laboratory, Marmara University, Goztepe, Istanbul TR-34722 (Turkey); Mihailescu, I.N., E-mail: ion.mihailescu@inflpr.ro [National Institute for Lasers, Plasma and Radiation Physics, Magurele RO-077125 (Romania)

2016-02-01

Hydroxyapatite (HA) is a consecrated biomaterial for bone reconstruction. In the form of thin films deposited by pulsed laser technologies, it can be used to cover metallic implants aiming to increase biocompatibility and osseointegration rate. HA of animal origin (bovine, BHA) reinforced with MgF{sub 2} (2 wt.%) or MgO (5 wt.%) were used for deposition of thin coatings with improved adherence, biocompatibility and antimicrobial activity. For pulsed laser deposition experiments, a KrF* (λ = 248 nm, τ{sub FWHM} ≤ 25 ns) excimer laser source was used. The deposited structures were characterized from a physical–chemical point of view by X-Ray Diffraction, Fourier Transform Infra-Red Spectroscopy, Scanning Electron Microscopy in top- and cross-view modes, Energy Dispersive X-Ray Spectroscopy and Pull-out adherence tests. The microbiological assay using the HEp-2 cell line revealed that all target materials and deposited thin films are non-cytotoxic. We conducted tests on three strains isolated from patients with dental implants failure, i.e. Microccocus sp., Enterobacter sp. and Candida albicans sp. The most significant anti-biofilm effect against Microcococcus sp. strain, at 72 h, was obtained in the presence of BHA:MgO thin films. For Enterobacter sp. strain a superior antimicrobial activity at 72 h was noticed, in respect with simple BHA or Ti control. The enhanced antimicrobial performances, correlated with good cytocompatibility and mechanical properties recommend these biomaterials as an alternative to synthetic HA for the fabrication of reliable implant coatings for dentistry and other applications. - Highlights: • Novel biological derived HA coatings fabricated by pulsed laser deposition. • Renewable resources • Reinforcement with MgF{sub 2} and MgO improves the HA coatings' bonding strength. • Significant anti-biofilm effect obtained for MgO reinforced HA films. • Alternative low cost solutions for a new generation of dental implants.

Activation of Spinal α2-Adrenoceptors Using Diluted Bee Venom Stimulation Reduces Cold Allodynia in Neuropathic Pain Rats

Directory of Open Access Journals (Sweden)

Suk-Yun Kang

2012-01-01

Full Text Available Cold allodynia is an important distinctive feature of neuropathic pain. The present study examined whether single or repetitive treatment of diluted bee venom (DBV reduced cold allodynia in sciatic nerve chronic constriction injury (CCI rats and whether these effects were mediated by spinal adrenergic receptors. Single injection of DBV (0.25 or 2.5 mg/kg was performed into Zusanli acupoint 2 weeks post CCI, and repetitive DBV (0.25 mg/kg was injected for 2 weeks beginning on day 15 after CCI surgery. Single treatment of DBV at a low dose (0.25 mg/kg did not produce any anticold allodynic effect, while a high dose of DBV (2.5 mg/kg significantly reduced cold allodynia. Moreover, this effect of high-dose DBV was completely blocked by intrathecal pretreatment of idazoxan (α2-adrenoceptor antagonist, but not prazosin (α1-adrenoceptor antagonist or propranolol (nonselective β-adrenoceptor antagonist. In addition, coadministration of low-dose DBV (0.25 mg/kg and intrathecal clonidine (α2-adrenoceptor agonist synergically reduced cold allodynia. On the other hand, repetitive treatments of low-dose DBV showing no motor deficit remarkably suppressed cold allodynia from 7 days after DBV treatment. This effect was also reversed by intrathecal idazoxan injection. These findings demonstrated that single or repetitive stimulation of DBV could alleviate CCI-induced cold allodynia via activation of spinal α2-adrenoceptor.

Two-dimensional electron gases in MgZnO/ZnO and ZnO/MgZnO/ZnO heterostructures grown by dual ion beam sputtering

Science.gov (United States)

Singh, Rohit; Arif Khan, Md; Sharma, Pankaj; Than Htay, Myo; Kranti, Abhinav; Mukherjee, Shaibal

2018-04-01

This work reports on the formation of high-density (~1013-1014 cm-2) two-dimensional electron gas (2DEG) in ZnO-based heterostructures, grown by a dual ion beam sputtering system. We probe 2DEG in bilayer MgZnO/ZnO and capped ZnO/MgZnO/ZnO heterostructures utilizing MgZnO barrier layers with varying thickness and Mg content. The effect of the ZnO cap layer thickness on the ZnO/MgZnO/ZnO heterostructure is also studied. Hall measurements demonstrate that the addition of a 5 nm ZnO cap layer results in an enhancement of the 2DEG density by about 1.5 times compared to 1.11 × 1014 cm-2 for the uncapped bilayer heterostructure with the same 30 nm barrier thickness and 30 at.% Mg composition in the barrier layer. From the low-temperature Hall measurement, the sheet carrier concentration and mobility are both found to be independent of the temperature. The capacitance-voltage measurement suggests a carrier density of ~1020 cm-3, confined in 2DEG at the MgZnO/ZnO heterointerface. The results presented are significant for the optimization of 2DEG for the eventual realization of cost-effective and large-area MgZnO/ZnO-based high-electron-mobility transistors.

Determination of band offsets at strained NiO and MgO heterojunction for MgO as an interlayer in heterojunction light emitting diode applications

Energy Technology Data Exchange (ETDEWEB)

Singh, S.D., E-mail: devsh@rrcat.gov.in [Raja Ramanna Centre for Advanced Technology, Indore, Madhya Pradesh 452013 (India); Nand, Mangla [Bhabha Atomic Research Centre, Mumbai, Maharashtra 400085 (India); Ajimsha, R.S.; Upadhyay, Anuj; Kamparath, Rajiv; Mukherjee, C.; Misra, P.; Sinha, A.K. [Raja Ramanna Centre for Advanced Technology, Indore, Madhya Pradesh 452013 (India); Jha, S.N. [Bhabha Atomic Research Centre, Mumbai, Maharashtra 400085 (India); Ganguli, Tapas [Raja Ramanna Centre for Advanced Technology, Indore, Madhya Pradesh 452013 (India)

2016-12-15

Highlights: • Valence band offset at NiO/MgO heterojunction is experimentally determined. • Experimentally determined value of 2.3 ± 0.4 eV is significantly larger than the predicted from theoretical calculations. • The value of valence band offset is in corroboration with that estimated from the band transitivity model. • Our result can be used to predict accurately carrier transport and electroluminescence mechanisms for heterojunction LEDs. - Abstract: Valence band offset of 2.3 ± 0.4 eV at strained NiO/MgO heterojunction is determined from photoelectron spectroscopy (PES) measurements. The determined value of valence band offset is larger than that is predicted from first principle calculations, but is in corroboration with that obtained from band transitivity rule. Our PES result indicates a larger value of the valence band offset at strained NiO/MgO heterojunction and can be used to predict accurately carrier transport and electroluminescence mechanisms for n-ZnO/MgO/p-NiO and p-NiO/MgO/n-GaN heterojunction light emitting diodes.

Intermittent Ozonation to Reduce Excess Biological Sludge in SBR

Directory of Open Access Journals (Sweden)

Afshin Takdastan

2009-09-01

Full Text Available A combination of ozonation and an aerobic biological process such as the activated sludge has been recently developed as an alternative solution for sludge reduction with the objective of minimizing the excess biological sludge production. In this study, two SBR reactors each with a capacity of 20 liters and controlled by an on-line system are used. Once the steady state conditions were set in the reactors, sampling and testing of such parameters as COD, MLSS, MLVSS, DO, SOUR, SVI, residual ozone, and Y coefficient were performed over the 8 months of research. Results showed that during the solid retention time of 10 days, the kinetic coefficients of Y and Kd were 0.58 mg biomass/mg COD and 0.058 1/day, respectively. In the next stage of the study, different concentrations of ozone in the reactor were intermittently used to reduce the excess biological sludge production. The results showed that 22 mg of ozone per 1 gram of MLSS in the reactor was able to reduce the yield coefficient Y from 0.58 to 0.23 mg Biomass/mg COD. In other words, the excess biological sludge reduced by 60% but the soluble COD increased slightly in the effluent and the removal percentage decreased from 92 in the blank reactor to 76 in the test reactor. While the amount of SVI and SOUR for this level of ozone concentration reached 6 mgO2/h.gVSS and 27 ml/g, respectively. No excess sludge was observed in the reactor for an ozone concentration of 27 mg per 1 gram of MLSS.

Significant Association between Sulfate-Reducing Bacteria and Uranium-Reducing Microbial Communities as Revealed by a Combined Massively Parallel Sequencing-Indicator Species Approach▿ †

Science.gov (United States)

Cardenas, Erick; Wu, Wei-Min; Leigh, Mary Beth; Carley, Jack; Carroll, Sue; Gentry, Terry; Luo, Jian; Watson, David; Gu, Baohua; Ginder-Vogel, Matthew; Kitanidis, Peter K.; Jardine, Philip M.; Zhou, Jizhong; Criddle, Craig S.; Marsh, Terence L.; Tiedje, James M.

2010-01-01

Massively parallel sequencing has provided a more affordable and high-throughput method to study microbial communities, although it has mostly been used in an exploratory fashion. We combined pyrosequencing with a strict indicator species statistical analysis to test if bacteria specifically responded to ethanol injection that successfully promoted dissimilatory uranium(VI) reduction in the subsurface of a uranium contamination plume at the Oak Ridge Field Research Center in Tennessee. Remediation was achieved with a hydraulic flow control consisting of an inner loop, where ethanol was injected, and an outer loop for flow-field protection. This strategy reduced uranium concentrations in groundwater to levels below 0.126 μM and created geochemical gradients in electron donors from the inner-loop injection well toward the outer loop and downgradient flow path. Our analysis with 15 sediment samples from the entire test area found significant indicator species that showed a high degree of adaptation to the three different hydrochemical-created conditions. Castellaniella and Rhodanobacter characterized areas with low pH, heavy metals, and low bioactivity, while sulfate-, Fe(III)-, and U(VI)-reducing bacteria (Desulfovibrio, Anaeromyxobacter, and Desulfosporosinus) were indicators of areas where U(VI) reduction occurred. The abundance of these bacteria, as well as the Fe(III) and U(VI) reducer Geobacter, correlated with the hydraulic connectivity to the substrate injection site, suggesting that the selected populations were a direct response to electron donor addition by the groundwater flow path. A false-discovery-rate approach was implemented to discard false-positive results by chance, given the large amount of data compared. PMID:20729318

Pegasus project. DLC coating and low viscosity oil reduce energy losses significantly

Energy Technology Data Exchange (ETDEWEB)

Doerwald, Dave; Jacobs, Ruud [Hauzer Techno Coating (Netherlands). Tribological Coatings

2012-03-15

Pegasus, the flying horse from Greek mythology, is a suitable name for the research project initiated by a German automotive OEM with participation of Hauzer Techno Coating and several automotive suppliers. It will enable future automotive vehicles to reduce fuel consumption without losing power. The project described in this article focuses on the rear differential, because reducing friction here can contribute considerably to efficiency improvement of the whole vehicle. Surfaces, coating and oil viscosity have been investigated and interesting conclusions have been reached. (orig.)

Implementation of standardized follow-up care significantly reduces peritonitis in children on chronic peritoneal dialysis.

Science.gov (United States)

Neu, Alicia M; Richardson, Troy; Lawlor, John; Stuart, Jayne; Newland, Jason; McAfee, Nancy; Warady, Bradley A

2016-06-01

The Standardizing Care to improve Outcomes in Pediatric End stage renal disease (SCOPE) Collaborative aims to reduce peritonitis rates in pediatric chronic peritoneal dialysis patients by increasing implementation of standardized care practices. To assess this, monthly care bundle compliance and annualized monthly peritonitis rates were evaluated from 24 SCOPE centers that were participating at collaborative launch and that provided peritonitis rates for the 13 months prior to launch. Changes in bundle compliance were assessed using either a logistic regression model or a generalized linear mixed model. Changes in average annualized peritonitis rates over time were illustrated using the latter model. In the first 36 months of the collaborative, 644 patients with 7977 follow-up encounters were included. The likelihood of compliance with follow-up care practices increased significantly (odds ratio 1.15, 95% confidence interval 1.10, 1.19). Mean monthly peritonitis rates significantly decreased from 0.63 episodes per patient year (95% confidence interval 0.43, 0.92) prelaunch to 0.42 (95% confidence interval 0.31, 0.57) at 36 months postlaunch. A sensitivity analysis confirmed that as mean follow-up compliance increased, peritonitis rates decreased, reaching statistical significance at 80% at which point the prelaunch rate was 42% higher than the rate in the months following achievement of 80% compliance. In its first 3 years, the SCOPE Collaborative has increased the implementation of standardized follow-up care and demonstrated a significant reduction in average monthly peritonitis rates. Copyright © 2016 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.

Effect of doxazosin gastrointestinal therapeutic system 4 mg vs tamsulosin 0.2 mg on nocturia in Chinese men with lower urinary tract symptoms: a prospective, multicenter, randomized, open, parallel study.

Science.gov (United States)

Zhang, Kai; Yu, Wei; Jin, Jie; Ye, Haiyun; Wang, Xiaofeng; Zhang, Ning; Yang, Yong; Zhong, Chenyang; Wan, Ben

2011-09-01

To compare the efficacy of the doxazosin gastrointestinal therapeutic system (doxazosin-GITS) 4 mg and tamsulosin 0.2 mg on nocturia in Chinese men with lower urinary tract symptoms (LUTS) suggestive of benign prostatic hyperplasia (BPH). Data were analyzed from a prospective, multicenter, randomized, open, parallel study of Chinese men aged 50-84 years with LUTS/BPH. Two hundred patients were randomized to receive daily treatment with 4 mg doxazosin-GITS (n=100) or 0.2 mg tamsulosin (n=100) for 8 weeks. Nocturia was assessed by question 7 of the International Prostate Symptom Score (IPSS-question 7) and a frequency-volume chart (FVC) at weeks 4 and 8. Self-reported quality of sleep and quality of life by the last question of the IPSS questionnaire were also evaluated. A total of 189 patients (94 receiving doxazosin-GITS, 95 tamsulosin) completed the study. The reduction from baseline in mean nocturia was greater with doxazosin-GITS than tamsulosin by the FVC (1.7 vs 1.3 at week 4; 2.1 vs 1.7 at week 8, both P=.001) and by the IPSS-question 7 (1.5 vs 1.1 at 4 weeks, P=.001; 2.0 vs 1.6 at 8 weeks, Psleep was significantly more with doxazosin-GITS than tamsulosin (43.6% vs 27.4% at 4 weeks, P=.020; 81.9% vs 67.4% at 8 weeks, P=.022), and quality of life was better with doxazosin-GITS (2.5 vs 2.8 at 4 weeks, P=.001; 2.1 vs 2.5 at 8 weeks, P<.001). In Chinese patients with LUTS/BPH, doxazosin-GITS is slightly better than tamsulosin in reducing the frequency of nocturia. Copyright © 2011 Elsevier Inc. All rights reserved.

Constraints on the ^22Ne(α,n)^25Mg reaction rate from ^natMg+n Total and ^25Mg(n,γ ) Cross Sections

Science.gov (United States)

Koehler, Paul

2002-10-01

The ^22Ne(α,n)^25Mg reaction is the neutron source during the s process in massive and intermediate mass stars as well as a secondary neutron source during the s process in low mass stars. Therefore, an accurate determination of this rate is important for a better understanding of the origin of nuclides heavier than iron as well as for improving s-process models. Also, because the s process produces seed nuclides for a later p process in massive stars, an accurate value for this rate is important for a better understanding of the p process. Because the lowest observed resonance in direct ^22Ne(α,n)^25Mg measurements is considerably above the most important energy range for s-process temperatures, the uncertainty in this rate is dominated by the poorly known properties of states in ^26Mg between this resonance and threshold. Neutron measurements can observe these states with much better sensitivity and determine their parameters much more accurately than direct ^22Ne(α,n)^25Mg measurements. I have analyzed previously reported Mg+n total and ^25Mg(n,γ ) cross sections to obtain a much improved set of resonance parameters for states in ^26Mg in this region, and an improved estimate of the uncertainty in the ^22Ne(α,n)^25Mg reaction rate. This work was supported by the U.S. DOE under contract No. DE-AC05-00OR22725 with UT-Battell, LLC.

Photoionization behavior of Eu2+-doped BaMgSiO4 long-persisting phosphor upon UV irradiation

International Nuclear Information System (INIS)

Li, Y.; Wang, Y.; Gong, Y.; Xu, X.; Zhang, F.

2011-01-01

Highlights: → Photoionization behavior of BaMgSiO 4 :Eu 2+ long persistent phosphor upon UV irradiation. → Green phosphorescence was obtained from BaMgSiO 4 :Eu 2+ . → The ionization of Eu 2+ to Eu 3+ was observed in BaMgSiO 4 :Eu 2+ . → The photogenerated Eu 3+ cannot change back to its divalent state at room temperature. → The phosphorescence is associated with the formation forming Eu 3+ -e - pairs. - Abstract: The fluorescence, phosphorescence and thermoluminescence properties of Eu-doped BaMgSiO 4 phosphors sintered in air and in a reducing atmosphere were investigated. Phosphorescence of phosphor sintered in a reducing atmosphere can last for 1.5 h at a recognizable intensity level, whereas phosphorescence of air-sintered phosphor can only persist for 6 min. In addition, a distinction between the shape of the fluorescence spectrum and its corresponding phosphorescence spectrum is observed in the former case. Ionization of Eu 2+ to Eu 3+ upon UV irradiation is observed in the phosphor prepared in a reducing atmosphere, but there is no indication that the photogenerated Eu 3+ cannot change back to its divalent state at room temperature after the excitation source is switched off. In addition, phosphor sintered in a reducing atmosphere shows photochromism upon UV irradiation. No such photoionization and photochromism behavior is observed for the air-sintered phosphor. A possible Eu 2+ photoionization mechanism is constructed on the basis of these experimental observations. The photoionization mechanism presented can also successfully explain the fluorescence and phosphorescence behavior of Eu in BaMgSiO 4 .

Labelling and Organ Distrbution Characterisics of 99mTc Galacturonate Complex Using Dithionite as Reducing Agent

International Nuclear Information System (INIS)

Al Hilli, A.M.; Mirza, K.S.; Al Noori, T.H.J.

2000-01-01

The labelling conditions of 99m T c-galacturonate complex using dithionite as reducing agent for periechnetate have been described. GCS-method has been applied for radiochemical determination of the labelled complex. At a constant amount of the ligand (50mg) in the preparation, high labelling of 99m Tc -galacturonate complex was obtained in the presence of the reducing agent. The effect of pH on the labelling yield have show that labelling occurs only at near neutral to slightly alkaline pH. The organ distribution results of 99m Tc -galacturonate complex as a function of the reducing agent concentration was achieved in rats. On using 8mg of dithionite as reducing agent,the activity uptake in the kindneys was significantly low, while in the bones was higher, but decreased after 1 hr. of injection. This,however is due to the instability of the labelled complex releasing pertechnetate which was evident by the increase of activity in the stomach. The organ distribution picture of the complex has been reversed by increasing the concentration of dithionite(16 mg) in the preparation,where the activity uptake in the kidnys was increased to higher level and in the bones was decreased.The activity in the stomach was rather low indicating a more stable complex towards oxidation or decomposition

Corrosion behaviour of Mg-Cu and Mg-Mo composites in 3.5% NaCl

International Nuclear Information System (INIS)

Budruk Abhijeet, S.; Balasubramaniam, R.; Gupta, M.

2008-01-01

The corrosion behaviour of pure magnesium, Mg-Cu (0.3, 0.6, and 1 vol.%) and Mg-Mo (0.1, 0.3, and 0.6 vol.%) composites has been studied in 3.5% NaCl solution by weight loss and polarisation methods. Corrosion rates determined by weight loss method were considerably higher than that determined by polarisation method. The corrosion rate increased with increasing volume fraction of reinforcement in Mg-Cu and Mg-Mo composites. At the same volume fraction of reinforcement, molybdenum reinforced composite corroded faster than copper reinforced composite. The galvanic current density between Mg-Cu and Mg-Mo couples has been experimentally measured using zero resistance ammeter technique. The experimentally observed galvanic current densities were in close agreement with those obtained using mixed potential theory analysis. SEM observation of corroded samples confirmed microgalvanic activity at the matrix/reinforcement interfaces. The poor corrosion resistance of composites has been attributed to microgalvanic effects between the matrix and reinforcements and inferior quality of surface films

Propranolol reduces the anxiety associated with day case surgery.

Science.gov (United States)

Mealy, K; Ngeh, N; Gillen, P; Fitzpatrick, G; Keane, F B; Tanner, A

1996-01-01

To find out if propranolol, a non-cardioselective beta-blocker, can reduce the anxiety associated with day case surgery. Prospective randomized double blind trial. University hospital, Ireland. An unselected group of 53 patients undergoing day case surgery. Subjects randomised to receive either propranolol (10 mg) or placebo on the morning of operation. Blood pressure; pulse, anxiety, pain score and patient satisfaction. Mean (SD) Hospital Anxiety and Depression score was significantly lower in the propranolol group than in the control group (2.5 (0.7) compared with 4.6 (0.7), p anxiety.

Structural and electronic properties of Mg and Mg-Nb co-doped TiO2 (101) anatase surface

International Nuclear Information System (INIS)

Sasani, Alireza; Baktash, Ardeshir; Mirabbaszadeh, Kavoos; Khoshnevisan, Bahram

2016-01-01

Highlights: • Formation energy of Mg and Mg-Nb co-doped TiO_2 anatase surface (101) is studied. • Effect of Mg defect to the TiO_2 anatase (101) surface and bond length distribution of the surface is studied and it is shown that Mg defects tend to stay far from each other. • Effect of Mg and Nb to the bond length distribution of the surface studied and it is shown that these defects tend to stay close to each other. • Effects of Mg and Mg-Nb defects on DSSCs using TiO_2 anatase hosting these defects are studied. - Abstract: In this paper, by using density functional theory, Mg and Nb-Mg co-doping of TiO_2 anatase (101) surfaces are studied. By studying the formation energy of the defects and the bond length distribution of the surface, it is shown that Mg defects tend to stay as far as possible to induce least possible lattice distortion while Nb and Mg defects stay close to each other to cause less stress to the surface. By investigating band structure of the surface and changes stemmed from the defects, potential effects of Mg and Mg-Nb co-doping of TiO_2 surface on dye-sensitized solar cells are investigated. In this study, it is shown that the Nb-Mg co-doping could increase J_S_C of the surface while slightly decreasing V_O_C compared to Mg doped surface, which might result in an increase in efficiency of the DSSCs compared to Nb or Mg doped surfaces.

Phase diagrams of aluminium alloys of Al-Cu-Mg, Al-Mg-Si-Cu, and Al-Mg-Li system

International Nuclear Information System (INIS)

Ber, L.B.; Kaputkin, E.Ya.

2001-01-01

Isothermal diagrams of phase transformations (DPT) and temperature-time charts (TTC) of variation of electric conductivity and of mechanical features at tension were plotted following thermal treatment according to the pattern of direct hardening and ageing and according to the pattern of normal aging for D16 commercial alloy, Al-Cu-Mg model alloy of the same system, AD37 commercial alloys of Al-Mg-Si-Cu and 1424 one of Al-Li-Mg system. Phase transformations were studied by means of fluorescence electron microscopy, micro-X-ray spectral analysis, X-ray phase analysis of single crystals and polycrystals and differential scanning calorimetry. For every alloy comparison of TTC and DPT enables to clarity the mechanism of phase composition effect on features and to optimize conditions of hardening cooling and ageing [ru

Transformation of benzalkonium chloride under nitrate reducing conditions.

Science.gov (United States)

Tezel, Ulas; Pavlostathis, Spyros G

2009-03-01

The effect and transformation potential of benzalkonium chlorides (BAC) under nitrate reducing conditions were investigated at concentrations up to 100 mg/L in batch assays using a mixed, mesophilic (35 degrees C) methanogenic culture. Glucose was used as the carbon and energy source and the initial nitrate concentration was 70 mg N/L Dissimilatory nitrate reduction to ammonia (DNRA) and to dinitrogen (DNRN) were observed at BAC concentrations up to 25 mg/L At and above 50 mg BAC/L, DNRA was inhibited and DNRN was incomplete resulting in accumulation of nitrous oxide. Long-term inhibition of methanogenesis and accumulation of volatile fatty acids were observed at and above 50 mg BAC/L Over 99% of the added BAC was recovered from all cultures except the one amended with 100 mg BAC/L where 37% of the initially added BAC was transformed during the 100 day incubation period. Abiotic and biotic assays performed with 100 mg/L of BAC and 5 mM (in the liquid phase) of either nitrate, nitrite, or nitric oxide demonstrated that BAC transformation was abiotic and followed the modified Hofmann degradation pathway, i.e., bimolecular nucleophilic substitution with nitrite. Alkyl dimethyl amines (tertiary amines) were produced at equamolar levels to BAC transformed, but were not further degraded. This is the first report demonstrating the transformation of BAC under nitrate reducing conditions and elucidating the BAC transformation pathway.

Phaleria macrocarpa reduces glomerular growth factor expression in alloxan-induced diabetic rats

Directory of Open Access Journals (Sweden)

Evy Sulistyoningrum

2013-08-01

Full Text Available Background Diabetic nephropathy (DN is the most serious complication of diabetes, causing end-stage renal disease throughout the world. Recent studies have reported a direct role of vascular endothelial growth factor (VEGF and transforming growth factor-â (TGF-â in DN pathogenesis. VEGF and TGF-â are expressed early in glomeruli in response to hyperglycemia. Active substances of Phaleria macrocarpa (PM pericarp are known to have nephroprotective effects. This study aimed to evaluate the effects of Phaleria macrocarpa (Scheff. Boerl pericarp extract on VEGF and TGF-â expression in alloxan-induced diabetic rats. Methods An experimental study was conducted on twenty five male albino (Sprague Dawley rats divided into five groups (of five each: normal control; diabetic; diabetic + metformin 100 mg/kgBW; diabetic + methanolic PM extract 250 mg/kgBW; and diabetic + aqueous PM extract 250 mg/kgBW. Diabetes was induced by alloxan monohydrate 150 mg/BW intraperitoneally. Treatment was given for 3 weeks. VEGF and TGF-â expression analysis was performed by means of immunohistochemical technique. Differences between groups were assessed by one-way ANOVA. Results VEGF expression in the PM extract group was significantly lower than that in the diabetic group and even metformin group (p<0.01. TGF-â expression in methanolic PM extract group was significantly lower than in diabetic and metformin group (p<0.01, but aqueous PM extract group only showed significancy when compared with diabetic group (p< 0.01. Conclusions Phaleria macrocarpa pericarp extract reduces glomerular expression of TGF-â and VEGF in alloxan-induced diabetic rats.

The Improvement of Dehydriding the Kinetics of NaMgH3 Hydride via Doping with Carbon Nanomaterials

Directory of Open Access Journals (Sweden)

Zhong-Min Wang

2016-12-01

Full Text Available NaMgH3 perovskite hydride and NaMgH3–carbon nanomaterials (NH-CM composites were prepared via the reactive ball-milling method. To investigate the catalytic effect of CM on the dehydriding kinetic properties of NaMgH3 hydride, multiwall carbon nanotubes (MWCNTs and graphene oxide (GO were used as catalytic additives. It was found that dehydriding temperatures and activation energies (ΔE1 and ΔE2 for two dehydrogenation steps of NaMgH3 hydride can be greatly reduced with a 5 wt. % CM addition. The NH–2.5M–2.5G composite presents better dehydriding kinetics, a lower dehydriding temperature, and a higher hydrogen-desorbed amount (3.64 wt. %, 638 K. ΔE1 and ΔE2 can be reduced by about 67 kJ/mol and 30 kJ/mol, respectively. The results suggest that the combination of MWCNTs and GO is a better catalyst as compared to MWCNTs or GO alone.

The dependence of Raman scattering on Mg concentration in Mg-doped GaN grown by MBE

International Nuclear Information System (INIS)

Flynn, Chris; Lee, William

2014-01-01

Magnesium-doped GaN (GaN:Mg) films having Mg concentrations in the range 5 × 10 18 –5 × 10 20 cm −3 were fabricated by molecular beam epitaxy. Raman spectroscopy was employed to study the effects of Mg incorporation on the positions of the E 2 and A 1 (LO) lines identifiable in the Raman spectra. For Mg concentrations in excess of 2 × 10 19 cm −3 , increases in the Mg concentration shift both lines to higher wave numbers. The shifts of the Raman lines reveal a trend towards compressive stress induced by incorporation of Mg into the GaN films. The observed correlation between the Mg concentration and the Raman line positions establish Raman spectroscopy as a useful tool for optimizing growth of Mg-doped GaN. (papers)

The Significance of Serum beta2-Microglobulin Measurement in Various Renal Diseases

Energy Technology Data Exchange (ETDEWEB)

Koong, Sung Soo; Oh, Ha Yong; Han, Jin Suk; Lee, Jung Sang [Seoul National University College of Medicine, Seoul (Korea, Republic of)

1985-03-15

To evaluate change of serum beta{sub 2}-microglobulin concentration (sbeta{sub 2}-MG) and the usefulness of sbeta{sub 2}-MG and sbeta{sub 2}-MG/serum creatinine concentration (sCr) ratio in various renal diseases, sbeta{sub 2}-MG and sCr were measured in 25 normal controls and 90 patients of various renal diseases (16 cases of glomerulonephritis, 12 cases of acute renal failure, 8 cases of chronic renal failure, 24 cases of nephrotic syndrome, 15 cases of tubulointerstitial diseases and 15 cases of lupus nephritis) using Phadebas beta{sub 2}-Micro Test kits. The results were as follows; 1) In normal control, the mean value of sbeta{sub 2}-MG was 1.65+-0.41 mg/l and the mean value of sbeta{sub 2}-MG/sCr ratio was 0.14+-0.05. 2) In various renal diseases, the mean value of sbeta{sub 2}-MG was 6.74+-5.47 mg/l. The mean value of sbeta{sub 2}-MG/sCr ratio was 0.24+-0.11 and significantly elevated than that of normal contro1. (P<0.05). 3) The correlation between sbeta-2-MG and sCr in glomerular and tubulointerstitial disease was log sbeta{sub 2}-MG=0.90 log sCr-0.48 and its correlation coefficient was 0.78 (P<0.05). 4) In glomerular disease, the correlation between sbeta{sub 2}-MG and sCr was log sbeta{sub 2}-MG=0.89 log sCr-0.46 (r-0.76) and in tubulointerstitial disease, it was log sbeta{sub 2}-MG=0.95 1og sCr-0.59 (r-0.87). There was no significant difference between the two groups (p<0.05). 5) Among 32 cases of glomerular and tubulointerstitial disease patients, whose sCr was within normal range, 17 cases showed elevated sbeta{sub 2}-MG. The mean values of sbeta{sub 2}-MG/sCr ratio in these patients was 0.30+-0.14 and significantly elevated than that of normal control (p<0.05). 6) In 15 cases of lupus nephritis, 12 cases showed elevated sbeta{sub 2}-MG with normal sCr and 12 cases showed elevated sbeta{sub 2}-MG/sCr ratio. With above results, It was found that the sbeta{sub 2}-MG can be used as an index of glomerular filtration rate as in the case of sCr and thats

Phthalocyanine doping to improve critical current densities in MgB2 tapes

International Nuclear Information System (INIS)

Zhang Xianping; Ma Yanwei; Wang Dongliang; Gao Zhaoshun; Wang Lei; Qi Yanpeng; Awaji, Satoshi; Watanabe, Kazuo; Mossang, Eric

2009-01-01

Phthalocyanine-doped MgB 2 tapes were prepared by the in situ powder-in-tube method. The relationships between the critical current properties, crystallinity and microstructure were studied as a function of the phthalocyanine doping level. It is found that both H irr and H c2 were improved when MgB 2 samples were doped with phthalocyanine, which are mainly attributed to the effective carbon substitution and enhanced flux pinning strength caused by very fine grain sizes. Furthermore, compared to pure samples, the MgO content remained almost unchanged in all doped tapes, which is very beneficial to having better grain connectivity in MgB 2 . Significantly improved J c was obtained in the phthalocyanine-doped MgB 2 tapes, especially under high magnetic fields.