WorldWideScience

Sample records for mg prednisone compared

  1. Randomized clinical trial comparing oral prednisone (50 mg) with placebo before laparoscopic cholecystectomy

    DEFF Research Database (Denmark)

    Bisgaard, Thue; Schulze, S.; Hjortso, N.C.

    2008-01-01

    cholecystectomy. Methods In a double-blind placebo-controlled study, 200 patients were randomized to oral administration of prednisone (50 mg) or placebo 2 h before laparoscopic cholecystectomy. Patients received a similar standardized anaesthetic, surgical, and analgesic treatment. The primary outcome was pain......-h pain, fatigue or malaise scores or any other variables were found (P > 0.05). Conclusion There is no important clinical gain of preoperative oral steroid administration compared with placebo in patients undergoing laparoscopic cholecystectomy Udgivelsesdato: 2008/2...

  2. Prednisone raw material characterization and formulation development

    Directory of Open Access Journals (Sweden)

    Leonardo Henrique Toehwé

    2018-01-01

    Full Text Available ABSTRACT Solid dosage forms for oral use, particularly tablets, are the most highly used dosage forms in therapy because they are easily administered, have high productivity and relatively low cost and provide a more stable drug to form a semi-solid net. Numerous parameters influence the quality of the final dosage form. In this study, the dissolution profile of 20-mg prednisone tablets bioequivalent to the reference product and three test formulations were evaluated using stability testing. During the study, prednisone tablets and the active pharmaceutical ingredient (API prednisone from two different manufacturers were characterized with respect to their physical and physicochemical properties. The results showed that the dissolution profiles of the test batches and the reference product did not retain pharmaceutical equivalence throughout all the stability study. Notably, both samples of API prednisone were of the same crystal form, and any phase transition that occurred during the study could not be attributed to dissolution variation during stability.

  3. Randomized trial comparing adriamycin vincristine (av) cyclophosphamide methotrexate 5-Fluorouracil prednisone (cmfp) hybrid versus av-cmfp monthly alternated in metastatic breast-cancer.

    Science.gov (United States)

    Vallejo, C; Bianco, A; Perez, J; Machiavelli, M; Leone, B; Romero, A; Rabinovich, M; Alvarez, L; Rodriguez, R; Cuevas, M; Hannois, A; Lacava, J

    1993-03-01

    194 metastatic breast cancer patients with no prior chemotherapy for advanced disease were randomized to one of two alternating schedules, fulfilling the requisites of Goldie and Coldman's hypothesis to evaluate if the earlier alternation of two non-cross resistant regimens is superior in terms of response (R), duration of R (DR), and survival (SV). arm A: Adriamycin (A) 60 mg/m2 IV day (d) 1 and vincristine (V) 1.4 mg/m2 IV d 1 and 8 monthly alternated with cyclophosphamide (C) 100 mg/m2 p.o. d 1-14; methotrexate (M) 30 mg/m2 IV d 1 and 8; 5-fluorouracil (F) 600 mg/m2 IV d 1 and 8 and prednisone (Pr) 40 mg/m2 p.o. d 1-14. Arm B (hybrid): A 60 mg/m2 IV d 1; V 1.4 mg/m2 IV d 1; C 100 mg/m2 p.o. d 8-14; M 30 mg/m2 IV d 8; F 600 mg/m2 IV d 8 and Pr 40 mg/m2 p.o. d 8-14. 87 and 89 patients are evaluable for R. Arm A: R= 59% (51/87); median DR= 13 months (m); median SV= 25 m. Arm B: R= 69% (61/89); median DR= 15 m.; median SV= 29 m. Myelosuppression was slightly more marked in arm B. Three patients had toxic-related deaths (arm A: 1; arm B: 2). a trend favoring an earlier alternation and higher dose intensity (DI) was found regarding to R, DR and SV. However, differences were not statistically significant.

  4. Differential effects of prednisone and growth hormone on fuel metabolism and insulin antagonism in humans

    International Nuclear Information System (INIS)

    Horber, F.F.; Marsh, H.M.; Haymond, M.W.

    1991-01-01

    Human growth hormone (hGH) and prednisone cause insulin resistance and glucose intolerance. However, it is unknown whether hGH and prednisone antagonize insulin action on protein, fat, and carbohydrate metabolism by a common or independent mechanism. Therefore, protein, fat, and carbohydrate metabolism was assessed simultaneously in four groups of eight subjects each after 7 days of placebo, recombinant DNA hGH (rhGH; 0.1 mg.kg-1.day-1), prednisone (0.8 mg.kg-1.day-1), or rhGH and prednisone administration after an 18-h fast and during gut infusion of glucose and amino acids (fed state). Fasting plasma glucose concentrations were similar during placebo and rhGH but elevated (P less than 0.001) during combined treatment, whereas plasma insulin concentrations were higher (237 +/- 57 pmol/ml, P less than 0.001) during combined than during placebo, rhGH, or prednisone treatment (34, 52, and 91 pM, respectively). In the fed state, plasma glucose concentrations were elevated only during combined treatment (11.3 +/- 2.1 mM, P less than 0.001). Plasma insulin concentrations were elevated during therapy with prednisone alone and rhGH alone (667 +/- 72 and 564 +/- 65 pmol/ml, respectively, P less than 0.001) compared with placebo (226 +/- 44 pmol/ml) but lower than with the combined rhGH and prednisone treatment (1249 +/- 54 pmol/ml, P less than 0.01). Protein oxidation 14 C leucine increased (P less than 0.001) with prednisone therapy, decreased (P less than 0.001) with rhGH treatment, and was normal during the combined treatment

  5. Patterns of prednisone use during pregnancy in women with rheumatoid arthritis: Daily and cumulative dose.

    Science.gov (United States)

    Palmsten, Kristin; Rolland, Matthieu; Hebert, Mary F; Clowse, Megan E B; Schatz, Michael; Xu, Ronghui; Chambers, Christina D

    2018-04-01

    To characterize prednisone use in pregnant women with rheumatoid arthritis using individual-level heat-maps and clustering individual trajectories of prednisone dose, and to evaluate the association between prednisone dose trajectory groups and gestational length. This study included pregnant women with rheumatoid arthritis who enrolled in the MotherToBaby Autoimmune Diseases in Pregnancy Study (2003-2014) before gestational week 20 and reported prednisone use without another oral glucocorticoid during pregnancy (n = 254). Information on medication use and pregnancy outcomes was collected by telephone interview plus by medical record review. Prednisone daily dose and cumulative dose were plotted by gestational day using a heat map for each individual. K-means clustering was used to cluster individual trajectories of prednisone dose into groups. The associations between trajectory group and demographics, disease severity measured by the Health Assessment Questionnaire at enrollment, and gestational length were evaluated. Women used prednisone 3 to 292 days during pregnancy, with daily doses ranging from <1 to 60 mg. Total cumulative dose ranged from 8 to 6225 mg. Disease severity, non-biologic disease modifying anti-rheumatic drug use, and gestational length varied significantly by trajectory group. After adjusting for disease severity, non-biologic disease modifying anti-rheumatic drug use, and other covariates, the highest vs lowest daily dose trajectory group was associated with reduced gestational age at delivery (β: -2.3 weeks (95%: -3.4, -1.3)), as was the highest vs lowest cumulative dose trajectory group (β: -2.6 weeks (95%: -3.6, -1.5)). In pregnant women with rheumatoid arthritis, patterns of higher prednisone dose were associated with shorter gestational length compared with lower dose. Copyright © 2018 John Wiley & Sons, Ltd.

  6. Elucidation of the pharmacokinetics of prednisone and prednisolone: elimination and the effect of estrogen

    International Nuclear Information System (INIS)

    Gustavson, L.E.

    1985-01-01

    Several aspects of the pharmacokinetics of the interconvertible glucocorticoids prednisone and prednisolone have been studied. The pharmacokinetics of prednisolone were examined in postmenopausal women taking conjugated estrogens and age-matched control women. The subjects received iv bolus doses of 0.14 and 0.55 mg/kg prednisolone. Expected increases in clearance and volume of distribution with increasing dose were observed for total prednisolone in all subjects. At both doses, significant decreases in total and unbound prednisolone clearance were observed in the women taking estrogen compared to the controls. Volume of distribution was unchanged. The decreases in clearance are smaller than those observed in young women taking oral contraceptives indicating that factors other than estrogen administration may influence prednisolone clearance in oral contraceptive users. While the protein binding of prednisolone is well characterized, little is known about the protein binding of prednisone. Equilibrium dialysis employing [ 3 H]prednisone was used to study the binding of prednisone in human plasma containing endogenous hydrocortisone. Plasma was obtained from volunteers with normal and elevated transcortin binding capacities (CAP/sub T/). Prednisolone binding exhibits marked concentration dependence and sensitivity to CAP/sub T/. In contrast, prednisone binding is independent of concentration and CAP/sub T/

  7. Suitability of bovine bile compared to urine for detection of free, sulfate and glucuronate boldenone, androstadienedione, cortisol, cortisone, prednisolone, prednisone and dexamethasone by LC-MS/MS.

    Science.gov (United States)

    Chiesa, Luca; Nobile, Maria; Panseri, Sara; Vigo, Daniele; Pavlovic, Radmila; Arioli, Francesco

    2015-12-01

    The administration of boldenone and androstadienedione to cattle is forbidden in the European Union, while prednisolone is permitted for therapeutic purposes. They are pseudoendogenous substances (endogenously produced under certain circumstances). The commonly used matrices in control analyses are urine or liver. With the aim of improving the residue controls, we previously validated a method for steroid analysis in bile. We now compare urine (a 'classic' matrix) to bile, both collected at the slaughterhouse, to understand whether the detection of steroids in the latter is easier. With the aim of having clearer results, we tested the presence of the synthetic corticosteroid dexamethasone. The results show that bile does not substantially improve the detection of boldenone, or its conjugates, prednisolone and prednisone. Dexamethasone, instead, was found in 10 out of 53 bovine bile samples, but only in one urine sample from the same animals. Bile could constitute a novel matrix for the analysis of residues in food-producing animals, and possibly not only of synthetic corticosteroids. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Prednisone raw material characterization and formulation development

    OpenAIRE

    Leonardo Henrique Toehwé; Livia Deris Prado; Helvécio Vinícius Antunes Rocha

    2018-01-01

    ABSTRACT Solid dosage forms for oral use, particularly tablets, are the most highly used dosage forms in therapy because they are easily administered, have high productivity and relatively low cost and provide a more stable drug to form a semi-solid net. Numerous parameters influence the quality of the final dosage form. In this study, the dissolution profile of 20-mg prednisone tablets bioequivalent to the reference product and three test formulations were evaluated using stability testing. ...

  9. Custirsen in combination with docetaxel and prednisone for patients with metastatic castration-resistant prostate cancer (SYNERGY trial): a phase 3, multicentre, open-label, randomised trial.

    Science.gov (United States)

    Chi, Kim N; Higano, Celestia S; Blumenstein, Brent; Ferrero, Jean-Marc; Reeves, James; Feyerabend, Susan; Gravis, Gwenaelle; Merseburger, Axel S; Stenzl, Arnulf; Bergman, Andries M; Mukherjee, Som D; Zalewski, Pawel; Saad, Fred; Jacobs, Cindy; Gleave, Martin; de Bono, Johann S

    2017-04-01

    Clusterin is a chaperone protein associated with treatment resistance and upregulated by apoptotic stressors such as chemotherapy. Custirsen is a second-generation antisense oligonucleotide that inhibits clusterin production. The aim of the SYNERGY trial was to investigate the effect of custirsen in combination with docetaxel and prednisone on overall survival in patients with metastatic castration-resistant prostate cancer. SYNERGY was a phase 3, multicentre, open-label, randomised trial set at 134 study centres in 12 countries. Patients were eligible for participation if they had: metastatic castration-resistant prostate cancer and had received no previous chemotherapy; prostate-specific antigen greater than 5 ng/mL; and a Karnofsky performance score of 70% or higher. Patients were randomly assigned 1:1 centrally to either the docetaxel, prednisone, and custirsen combination or docetaxel and prednisone alone. Patients were not masked to treatment allocation. Randomisation was stratified by opioid use for cancer-related pain and radiographic evidence of progression. All patients received docetaxel 75 mg/m 2 intravenously with 5 mg of prednisone orally twice daily. Patients assigned docetaxel, prednisone, and custirsen received weekly doses of custirsen 640 mg intravenously after three loading doses of 640 mg. The primary endpoint was overall survival analysed in the intention-to-treat population. Patients who received at least one study dose were included in the safety analysis set. This trial is registered with ClinicalTrials.gov, number NCT01188187. The trial is completed and final analyses are reported here. Between Dec 10, 2010, and Nov 7, 2012, 1022 patients were enrolled to the trial, of whom 510 were assigned docetaxel, prednisone, and custirsen and 512 were allocated docetaxel and prednisone. No difference in overall survival was recorded between the two groups (median survival 23·4 months [95% CI 20·9-24·8] with docetaxel, prednisone, and custirsen vs

  10. CSA/AZA, in the absence of prednisone, improves linear growth in renal transplanted children.

    Science.gov (United States)

    David-Neto, E; Nahas, W; Sampaio, E C; Ianhez, L E; Sabbaga, E; Arap, S

    1992-01-01

    We compared the results of 44 renal transplants in children, of whom 24 were treated with CSA/AZA and 20 with prednisone in combination with AZA and/or CSA. There were no differences in age distribution or mean ages at transplant between the two treatment groups. The CSA/AZA group had a longer follow-up (29 +/- 33 vs 17 +/- 18 months). At the last follow-up, five children in the CSA/AZA and none in the prednisone group had lost their grafts. Serum creatinine increased in both groups from 0.7 +/- 0.1 mg/dl and 0.9 +/- 0.1 mg/dl at the end of the first month to 1.1 +/- 0.2 mg/dl in the 36th month (CSA/AZA group) (P renal transplant in children, but only 75% tolerated AZA/CSA without same damage to their grafts.

  11. Bortezomib, melphalan, prednisone (VMP) versus melphalan, prednisone, thalidomide (MPT) in elderly newly diagnosed multiple myeloma patients

    DEFF Research Database (Denmark)

    Morabito, Fortunato; Bringhen, Sara; Larocca, Alessandra

    2014-01-01

    Novel agents in combination with melphalan and prednisone (MP) significantly improved progression-free survival (PFS) and overall survival (OS) in multiple myeloma (MM). Randomized trials comparing MP plus bortezomib (VMP) versus MP plus thalidomide (MPT) are lacking. Nine hundred and fifty-six e...

  12. Prednisone Therapy for Duchenne Dystrophy

    Directory of Open Access Journals (Sweden)

    J Gordon Millichap

    2005-02-01

    Full Text Available The effects of prednisone on muscle function and the extent of steroid-related adverse effects were studied in 17 ambulant children with Duchenne muscular dystrophy (DMD at University Hospital, Groningen; Rehabilitation Centre, Utrecht; and Leiden University Medical Centre, the Netherlands.

  13. Addition of Granulocyte/Monocyte Apheresis to Oral Prednisone for Steroid-dependent Ulcerative Colitis: A Randomized Multicentre Clinical Trial.

    Science.gov (United States)

    Domènech, Eugeni; Panés, Julián; Hinojosa, Joaquín; Annese, Vito; Magro, Fernando; Sturniolo, Giacomo Carlo; Bossa, Fabrizio; Fernández, Francisco; González-Conde, Benito; García-Sánchez, Valle; Dignass, Axel; Herrera, José Manuel; Cabriada, José Luis; Guardiola, Jordi; Vecchi, Maurizio; Portela, Francisco; Ginard, Daniel

    2018-05-25

    Steroid-dependency occurs in up to 30% of patients with ulcerative colitis [UC]. In this setting, few drugs have demonstrated efficacy in inducing steroid-free remission. The aim of this study was to evaluate the efficacy and safety of adding granulocyte/monocyte apheresis [GMA] to oral prednisone in patients with steroid-dependent UC. This was a randomized, multicentre, open trial comparing 7 weekly sessions of GMA plus oral prednisone [40 mg/day and tapering] with prednisone alone, in patients with active, steroid-dependent UC [Mayo score 4-10 and inability to withdraw corticosteroids in 3 months or relapse within the first 3 months after discontinuation]. Patients were stratified by concomitant use of thiopurines at inclusion. A 9-week tapering schedule of prednisone was pre-established in both study groups. The primary endpoint was steroid-free remission [defined as a total Mayo score ≤2, with no subscore >1] at Week 24, with no re-introduction of corticosteroids. In all 123 patients were included [63 GMA group, 62 prednisone alone]. In the intention-to-treat analysis, steroid-free remission at Week 24 was achieved in 13% (95% confidence interval [CI] 6-24) in the GMA group and 7% [95% CI 2-16] in the control group [p = 0.11]. In the GMA group, time to relapse was significantly longer (hazard ratio [HR] 1.7 [1.16-2.48], P = 0.005) and steroid-related adverse events were significantly lower [6% vs 20%, P < 0.05]. In a randomized trial, the addition of 7 weekly sessions of GMA to a conventional course of oral prednisone did not increase the proportion of steroid-free remissions in patients with active steroid-dependent UC, though it delayed clinical relapse.

  14. Effects of Oral Prednisone Administration on Serum Cystatin C in Dogs.

    Science.gov (United States)

    Muñoz, J; Soblechero, P; Duque, F J; Macías-García, B; Ruiz, P; Zaragoza, C; Barrera, R

    2017-11-01

    Oral administration of glucocorticoid alters serum cystatin C (sCysC) concentration in humans. To determine if oral administration of prednisone alters sCysC in dogs without pre-existing renal disease. Forty six dogs were included: 10 dogs diagnosed with steroid responsive meningitis arteritis (SRMA; group A), 20 dogs diagnosed of pituitary-dependent hyperadrenocorticism (PDH; group B), and 16 healthy control dogs (group C). Retrospective observational study. SRMA diagnosed dogs were administered prednisone 4 mg/kg/24 h PO 7 days, reducing the dose to 2 mg/kg/24 h 7 days before medication withdrawal. In group A, sampling was performed at days 0, 7, 14 and a final control at day 21. Blood and urine samples were collected in the 3 groups, and in group A, sampling was performed at all time points (days 1, 7, 14, and 21). In group A, sCysC was significantly higher at day 7 compared to the control group (0.4 ± 0.04 mg/L vs. 0.18 ± 0.03 mg/L mean ± SEM respectively P 0.05). Dogs with PDH included in group B did not have significant differences in sCysC (0.22 ± 0.03 mg/L) compared to control (P > 0.05). Oral administration of prednisone unlike altered endogenous glucocorticoid production, increases sCysC in dogs in a dose-dependent fashion. Copyright © 2017 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

  15. Prednisone

    Science.gov (United States)

    ... immunosuppressive medications. Side Effects Many of the side–effects of steroids are predictable. All are related to: 1) the ... vary in the degree to which this side–effect of steroids occurs. Although some experience minimal hirsutism, the patient ...

  16. Prednisone

    Science.gov (United States)

    ... inappropriate happiness extreme changes in mood changes in personality bulging eyes acne thin, fragile skin red or ... to your pharmacist or contact your local garbage/recycling department to learn about take-back programs in ...

  17. Haemangioma with coagulopathy: sustained response to prednisone.

    Science.gov (United States)

    Evans, J; Batchelor, A D; Stark, G; Uttley, W S

    1975-01-01

    Two cases of giant haemangioma with thrombocytopenia are described. A satisfactory and sustained response to prednisone was achieved in respect of both coagulation abnormalities and tumour size. It is proposed that prednisone is effective by enhancement of thrombosis and reduction of fibrinolysis within the tumour, thus promoting a natural form of resolution. It is suggested that prednisone therapy should be first-choice treatment of complicated haemangiomas. Images Fig. 1 Fig. 3 PMID:147646

  18. Establishment of the relative antiinflammatory potency of deflazacort and prednisone in polymyalgia rheumatica

    DEFF Research Database (Denmark)

    Lund, B; Egsmose, C; Jørgensen, S

    1987-01-01

    following prednisone treatment. Subsequently, in a similar regimen, prednisone was compared with deflazacort at a weight ratio of 1:1.2 in 10 patients, 1:1.5 in another 10 patients, and 1:1.8 in still another 10 patients for purposes of dose titration. Again, significant rises were seen in ESR, plasma...

  19. Oral administration of prednisone to control refractory vertigo in Ménière's disease: a pilot study.

    Science.gov (United States)

    Morales-Luckie, Elizabeth; Cornejo-Suarez, Arnulfo; Zaragoza-Contreras, Miguel A; Gonzalez-Perez, Oscar

    2005-09-01

    To establish whether the oral administration of moderate doses of prednisone reduces refractory vertigo in Ménière's disease. Blinded, randomized, controlled trial. Tertiary referral center. Patients with Ménière's disease with limited vertigo control (Class C) and severe disability (Scale 3). Two groups (n = 8 per group) were treated orally with either diphenidol (25 mg/d) plus acetazolamide (250 mg/48 h) (control group), or the same treatment plus prednisone (0.35 mg/kg) daily for 18 weeks (prednisone group). The variables evaluated were the frequency and duration of vertigo, tinnitus, aural fullness, and audiographic parameters. The clinical surveillance was performed for 12 months after prednisone withdrawal. The frequency and duration of vertigo episodes were reduced by 50% and 30%, respectively, by prednisone treatment. Prednisone-treated patients manifested a significant reduction in tinnitus. No changes were observed in aural fullness or hearing. No metabolic or infectious disorders were observed. Oral prednisone helps to control refractory vertigo in Ménière's disease. These preliminary data suggest that prednisone can be a good noninvasive antivertigo management regimen for these patients.

  20. Pengaruh Prednison terhadap Perbaikan Pendengaran Penderita Lupus Eritematosus

    Directory of Open Access Journals (Sweden)

    Wijana

    2016-06-01

    Full Text Available Systemic lupus erythematosus (SLE is a chronic, multi-system, autoimmune disorder characterized by the production of autoantibodies and immune complexes deposition in tissue. Clinical manifestations may include skin, mucosa, joints, blood, heart, lungs, kidneys, central nervous system (CNS, immune system, and ears. SLE Iin the ears can caused sensorineural hearing loss, tinnitus, and vertigo. This hearing disorder is commonly bilateral and has high frequencies. Prednisone is an oral corticosteroid with glucocorticoid and mineralocorticoid effects. Glucocorticoids have anti-inflammatory and immunosuppressive effects. The aim of this study was to evaluate the effect of prednisone in improving the degree of hearing loss in patients with SLE. This study was conducted in from March–May 2013, at tThe Hearing and Speech Disorder Clinic of Ear Nose Throat-Head and Neck Surgery, Dr. Hasan Sadikin Hospital Bandung, using quasi-experimental method with pre-post design in which the results were statistically calculated using Rank Spearman test. This study involved 28 subjects who had been diagnosed for SLE. Anamnesis, physical examination, and laboratory test were performed, followed by pure tone audiometry, tympanometry, and distortion product optoacoustic emissions (DPOAE. Subjects were given prednisone 1 mg/kgBW/day with a maximum dose of 6o mg/day. Re-evaluation was performed after 4 weeksof treatment. Before treatment, 26 subjects had mild hearing loss and 2 subjects had symmetric moderate hearing loss at high frequencies symmetrically. After therapy, 24 subjects became normal and 4 subjects still had hearing loss (Rs=0.734, p<0.01. In conclusion, prednisone can improve hearing status of SLE patients.

  1. Tacrolimus Improves Symptoms of Children With Myasthenia Gravis Refractory to Prednisone.

    Science.gov (United States)

    Liu, Chanchan; Gui, Mengcui; Cao, Yayun; Lin, Jing; Li, Yue; Ji, Suqiong; Bu, Bitao

    2017-12-01

    Myasthenia gravis tends to affect children in China. Oral pyridostigmine and prednisone could effectively improve the symptoms, but multiple side effects become a major concern after long-term oral prednisone. To avoid the long-term complications of prednisone therapy and to obtain more satisfactory improvement, we tested the efficacy and safety of tacrolimus in children with myasthenia gravis. Children with myasthenia gravis who had not achieved satisfactory improvement or who experienced severe side effects after prednisone therapy were recruited between January 2015 and December 2016 at Tongji Hospital. All the children were treated with tacrolimus 1 mg to 2 mg daily and the dose was adjusted on the basis of the clinical response and the serum concentration. The dosage of prednisone, the severity of symptoms, blood samples, the serum concentration of tacrolimus, and titers of antiacetylcholine receptor antibodies were evaluated every four weeks. Fourteen children were enrolled. One child withdrew two weeks after the enrollment. Thirteen children have completed the therapy for one year. At the end point, the dosage of prednisone was significantly decreased (P myasthenia gravis score, and myasthenia gravis-specific manual muscle testing and myasthenia gravis-activities of daily living scores were significantly improved (P myasthenia gravis. Randomized clinical trials are needed to confirm the observation. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. PREDNISONE THERAPY SAFETY FOR TREATMENT OF PATIENTS WITH MIX OF TUBERCULOSIS AND HIV-INFECTION

    Directory of Open Access Journals (Sweden)

    G. V. Maksimov

    2013-01-01

    Full Text Available Abstract. The study of prednisone safety for treatment of TB mixed with HIV-infection has been conducted. Two groups of patients were compared. The first group was consisted of 88 patients who were treated by prednisone and standard tuberculosis therapy, the second group of patients presented by 45 patients received only tuberculosis medicines. It was demonstrated that in case of prednisone using (1st group the number of CD4 limphocytes increased, intoxication symptoms disappeared fast and recovery process accelerated. Increasing of cases with unfavorable course of TB and HIV-infection in patients of first group was not registered in compare with the second group. Thus, using of prednisone therapy to treat TB mixed with HIV-infection was safe, not lead to unfavorable course of TB or HIV-infection. Such kind of treatment especially important for patients with exudative reactions.

  3. Randomized, placebo-controlled, phase III trial of sunitinib plus prednisone versus prednisone alone in progressive, metastatic, castration-resistant prostate cancer.

    Science.gov (United States)

    Michaelson, M Dror; Oudard, Stephane; Ou, Yen-Chuan; Sengeløv, Lisa; Saad, Fred; Houede, Nadine; Ostler, Peter; Stenzl, Arnulf; Daugaard, Gedske; Jones, Robert; Laestadius, Fredrik; Ullèn, Anders; Bahl, Amit; Castellano, Daniel; Gschwend, Juergen; Maurina, Tristan; Chow Maneval, Edna; Wang, Shaw-Ling; Lechuga, Maria Jose; Paolini, Jolanda; Chen, Isan

    2014-01-10

    We evaluated angiogenesis-targeted sunitinib therapy in a randomized, double-blind trial of metastatic castration-resistant prostate cancer (mCRPC). Men with progressive mCRPC after docetaxel-based chemotherapy were randomly assigned 2:1 to receive sunitinib 37.5 mg/d continuously or placebo. Patients also received oral prednisone 5 mg twice daily. The primary end point was overall survival (OS); secondary end points included progression-free survival (PFS). Two interim analyses were planned. Overall, 873 patients were randomly assigned to receive sunitinib (n = 584) or placebo (n = 289). The independent data monitoring committee stopped the study for futility after the second interim analysis. After a median overall follow-up of 8.7 months, median OS was 13.1 months and 11.8 months for sunitinib and placebo, respectively (hazard ratio [HR], 0.914; 95% CI, 0.762 to 1.097; stratified log-rank test, P = .168). PFS was significantly improved in the sunitinib arm (median 5.6 v 4.1 months; HR, 0.725; 95% CI, 0.591 to 0.890; stratified log-rank test, P < .001). Toxicity and rates of discontinuations because of adverse events (AEs; 27% v 7%) were greater with sunitinib than placebo. The most common treatment-related grade 3/4 AEs were fatigue (9% v 1%), asthenia (8% v 2%), and hand-foot syndrome (7% v 0%). Frequent treatment-emergent grade 3/4 hematologic abnormalities were lymphopenia (20% v 11%), anemia (9% v 8%), and neutropenia (6% v < 1%). The addition of sunitinib to prednisone did not improve OS compared with placebo in docetaxel-refractory mCRPC. The role of antiangiogenic therapy in mCRPC remains investigational.

  4. Abiraterone plus Prednisone in Metastatic, Castration-Sensitive Prostate Cancer.

    Science.gov (United States)

    Fizazi, Karim; Tran, NamPhuong; Fein, Luis; Matsubara, Nobuaki; Rodriguez-Antolin, Alfredo; Alekseev, Boris Y; Özgüroğlu, Mustafa; Ye, Dingwei; Feyerabend, Susan; Protheroe, Andrew; De Porre, Peter; Kheoh, Thian; Park, Youn C; Todd, Mary B; Chi, Kim N

    2017-07-27

    Abiraterone acetate, a drug that blocks endogenous androgen synthesis, plus prednisone is indicated for metastatic castration-resistant prostate cancer. We evaluated the clinical benefit of abiraterone acetate plus prednisone with androgen-deprivation therapy in patients with newly diagnosed, metastatic, castration-sensitive prostate cancer. In this double-blind, placebo-controlled, phase 3 trial, we randomly assigned 1199 patients to receive either androgen-deprivation therapy plus abiraterone acetate (1000 mg daily, given once daily as four 250-mg tablets) plus prednisone (5 mg daily) (the abiraterone group) or androgen-deprivation therapy plus dual placebos (the placebo group). The two primary end points were overall survival and radiographic progression-free survival. After a median follow-up of 30.4 months at a planned interim analysis (after 406 patients had died), the median overall survival was significantly longer in the abiraterone group than in the placebo group (not reached vs. 34.7 months) (hazard ratio for death, 0.62; 95% confidence interval [CI], 0.51 to 0.76; P<0.001). The median length of radiographic progression-free survival was 33.0 months in the abiraterone group and 14.8 months in the placebo group (hazard ratio for disease progression or death, 0.47; 95% CI, 0.39 to 0.55; P<0.001). Significantly better outcomes in all secondary end points were observed in the abiraterone group, including the time until pain progression, next subsequent therapy for prostate cancer, initiation of chemotherapy, and prostate-specific antigen progression (P<0.001 for all comparisons), along with next symptomatic skeletal events (P=0.009). These findings led to the unanimous recommendation by the independent data and safety monitoring committee that the trial be unblinded and crossover be allowed for patients in the placebo group to receive abiraterone. Rates of grade 3 hypertension and hypokalemia were higher in the abiraterone group. The addition of abiraterone

  5. Effects of a new glucocorticoid, oxazacort, on some variables connected with bone metabolism in man: a comparison with prednisone.

    Science.gov (United States)

    Caniggia, A; Marchetti, M; Gennari, C; Vattimo, A; Nicolis, F B

    1977-03-01

    The urinary elimination of calcium, other electrolytes, and hydroxyproline and the oral absorption of 47Ca have been evaluated in three groups of 8 patients before and during a 15-day treatment with prednisone at daily doses of 25 and 50 mg and with oxazacort, a new glucocorticoid, at a daily dose of 50 mg. The results obtained demonstrate that oxazacort in short-term teatment with a high dose has no significant effect on the urinary elimination of calcium and hydroxypyroline in experimental conditions in which prednisone produces statistically significant and clinically relevant increase, both when given at the same dose and when given at half that dose. On the other hand, the oral absorption of 47Ca is decreased by oxazacort, but less than by prednisone at the same dose. As the antirheumatic activity of oxazacort appears to be only slightly lower than that of prednisone (activity ratio of about 0.84: 1), these findings may have interesting therapeutic implications.

  6. Comparing the Electrochemical Performance of LiFePO4/C Modified by Mg Doping and MgO Coating

    Directory of Open Access Journals (Sweden)

    Jianjun Song

    2013-01-01

    Full Text Available Supervalent cation doping and metal oxide coating are the most efficacious and popular methods to optimize the property of LiFePO4 lithium battery material. Mg-doped and MgO-coated LiFePO4/C were synthesized to analyze their individual influence on the electrochemical performance of active material. The specific capacity and rate capability of LiFePO4/C are improved by both MgO coating and Mg doping, especially the Mg-doped sample—Li0.985Mg0.015FePO4/C, whose discharge capacity is up to 163 mAh g−1, 145.5 mAh g−1, 128.3 mAh g−1, and 103.7 mAh g−1 at 1 C, 2 C, 5 C, and 10 C, respectively. The cyclic life of electrode is obviously increased by MgO surface modification, and the discharge capacity retention rate of sample LiFePO4/C-MgO2.5 is up to 104.2% after 100 cycles. Comparing samples modified by these two methods, Mg doping is more prominent on prompting the capacity and rate capability of LiFePO4, while MgO coating is superior in terms of improving cyclic performance.

  7. Mg and Mg alloys: how comparable are in vitro and in vivo corrosion rates? A review.

    Science.gov (United States)

    Martinez Sanchez, Adela Helvia; Luthringer, Bérengère J C; Feyerabend, Frank; Willumeit, Regine

    2015-02-01

    Due to their biodegradability, magnesium and magnesium-based alloys could represent the third generation of biomaterials. However, their mechanical properties and time of degradation have to match the needs of applications. Several approaches, such as choice of alloying elements or tailored microstructure, are employed to tailor corrosion behaviour. Due to the high electrochemical activity of Mg, numerous environmental factors (e.g. temperature and surrounding ion composition) influence its corrosion behaviour, making it unpredictable. Nevertheless, the need of reliable in vitro model(s) to predict in vivo implant degradation is increasing. In an attempt to find a correlation between in vitro and vivo corrosion rates, this review presents a systematic literature survey, as well as an attempt to correlate the different results. Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  8. Melphalan, prednisone, and lenalidomide versus melphalan, prednisone, and thalidomide in untreated multiple myeloma

    DEFF Research Database (Denmark)

    Zweegman, Sonja; van der Holt, Bronno; Mellqvist, Ulf-Henrik

    2016-01-01

    The combination of melphalan, prednisone, and thalidomide (MPT) is considered standard therapy for newly diagnosed patients with multiple myeloma who are ineligible for stem cell transplantation. Long-term treatment with thalidomide is hampered by neurotoxicity. Melphalan, prednisone, and lenalid......The combination of melphalan, prednisone, and thalidomide (MPT) is considered standard therapy for newly diagnosed patients with multiple myeloma who are ineligible for stem cell transplantation. Long-term treatment with thalidomide is hampered by neurotoxicity. Melphalan, prednisone......, and lenalidomide, followed by lenalidomide maintenance therapy, showed promising results without severe neuropathy emerging. We randomly assigned 668 patients between nine 4-week cycles of MPT followed by thalidomide maintenance until disease progression or unacceptable toxicity (MPT-T) and the same MP regimen...... with thalidomide being replaced by lenalidomide (MPR-R). This multicenter, open-label, randomized phase 3 trial was undertaken by Dutch-Belgium Cooperative Trial Group for Hematology Oncology and the Nordic Myeloma Study Group (the HOVON87/NMSG18 trial). The primary end point was progression-free survival (PFS...

  9. Prednisone plus cabazitaxel or mitoxantrone for metastatic castration-resistant prostate cancer progressing after docetaxel treatment: a randomised open-label trial

    DEFF Research Database (Denmark)

    de Bono, Johann Sebastian; Oudard, Stephane; Ozguroglu, Mustafa

    2010-01-01

    Cabazitaxel is a novel tubulin-binding taxane drug with antitumour activity in docetaxel-resistant cancers. We aimed to compare the efficacy and safety of cabazitaxel plus prednisone with those of mitoxantrone plus prednisone in men with metastatic castration-resistant prostate cancer with progre...

  10. Effects and mechanisms of pirfenidone, prednisone and acetylcysteine on pulmonary fibrosis in rat idiopathic pulmonary fibrosis models.

    Science.gov (United States)

    Yu, Wencheng; Guo, Fang; Song, Xiaoxia

    2017-12-01

    Previous studies have reported that caveolin-1 (Cav-1) is associated with lung fibrosis. However, the role of Cav-1 expression in pirfenidone-treated idiopathic pulmonary fibrosis (IPF) is unknown. This study investigated Cav-1 expression in pirfenidone-treated IPF, and compared the effects of pirfenidone with acetylcysteine and prednisone on IPF. Rat IPF model was established by endotracheal injection of 5 mg/kg bleomycin A5 into the specific pathogen-free Wistar male rats. Pirfenidone (P, 100 mg/kg once daily), prednisone (H, 5 mg/kg once daily) and acetylcysteine (N, 4 mg/kg 3 times per day) were used to treat the rat model by intragastric administration for 45 consecutive days, respectively. The normal rats without IPF were used as the controls. After 15, 30 and 45 days of drug treatment, lung histopathology was assessed. The expression of Cav-1 was determined using real-time quantitative PCR and Western blot; the expression of tumour necrosis factor-α (TNF-α), transforming growth factor-β1 (TGF-β1) and platelet-derived growth factor (PDGF) was determined by enzyme-linked immunosorbent assay. After 15, 30 and 45 days of drug treatment, comparison of the three drug-treated groups with the model group showed significantly lower (p fibrosis scores of lung tissues, as well as expression of TGF-β1, TNF-α and PDGF, but the expression of Cav-1 was higher (p fibrosis score was significantly lower and the protein expression of Cav-1 was significantly higher in the P group (p fibrosis scores (r = -0.506, p pulmonary fibrosis in rat IPF models, which may be related with enhanced caveolin-1, reduced TNF-α, TGF-β1, PDGF.

  11. Effect of Ginkgo biloba extract combined with prednisone on bronchoalveolar lavage fluid related cytokines in patients with IPF

    Directory of Open Access Journals (Sweden)

    Zhen-Chun Shi

    2016-09-01

    Full Text Available Objective: To explore the effect of Ginkgo biloba extract (EGb combined with prednisone on bronchoalveolar lavage fluid (BALF related cytokines in patients with idiopathic pulmonary fibrosis (IPF. Methods: A total of 60 patients with IPF who were admitted in our hospital from March, 2015 to March, 2016 were included in the study and randomized into the observation group and the control group with 30 cases in each group. The patients in the two groups were given oxygen inhalation, bronchodilator agents, phlegm dissipating and asthma relieving, anti-infection, and other supporting treatments. The patients in the control group were orally given prednisone (0.5 mg/kg•d, continuously for 4 weeks, then in a dose of 0.25 mg/kg•d, continuously for 8 weeks, and finally the dosage was reduced to 0.125 mg/kg•d. On this basis, the patients in the observation group were given additional EGb, ie. ginkgo leaf capsule, 1 g/time, 3 times/d, continuously for 12 weeks. The efficacy was evaluated after 12- week treatment. ELISA was used to detect the levels of TNF-毩, IL-4, IL-10, and IFN-γ in BALF. The radioimmunoassay was used to determine the levels of serum HA, ColⅢ, PCⅢ, and LN. The pulmonary function detector was used to measure TLC, VC, DLCO, and 6MWT. Results: After treatment, TNF-毩 level in the control group was significantly reduced when compared with before treatment (P0.05, while HA, ColⅢ, PCⅢ, and LN levels in the observation group were significantly reduced when compared with before treatment (P<0.05, and the difference between the two groups was statistically significant (P<0.05. After treatment, TLC, VC, DLCO, and 6MWT in the two groups were significantly improved when compared with before treatment (P<0.05, and the difference between the two groups was statistically significant (P<0.05. Conclusions: EGb combined with prednisone can effectively enhance the levels of TNF-毩, IL-4, IL-10, and IFN-γ in BALF in patients with IPF, and

  12. Chinese herbal medicine and prednisone increase proportion of ...

    African Journals Online (AJOL)

    Objective: This study investigated the effects of Chinese herbal medicine and prednisone onCD4+FoxP3+ T cells (Tregs) and Th17 cells in the MRL/lpr mouse model of systemic lupus erythematosus. Methods: MRL/lpr mice were treated with herbal medicine (yin-nourishing and heat-clearing therapy), prednisone, and a ...

  13. Comparative study of 250 mg/day terbinafine and 100 mg/day itraconazole for the treatment of cutaneous sporotrichosis.

    Science.gov (United States)

    Francesconi, Glaucia; Francesconi do Valle, Antonio Carlos; Passos, Sonia Lambert; de Lima Barros, Mônica Bastos; de Almeida Paes, Rodrigo; Curi, André Luiz Land; Liporage, José; Porto, Cássio Ferreira; Galhardo, Maria Clara Gutierrez

    2011-05-01

    Itraconazole is currently used for the treatment of cutaneous sporotrichosis. Terbinafine at a daily dose of 250 mg has been successfully applied to the treatment of cutaneous sporotrichosis. To compare the efficacy of 250 mg/day terbinafine and 100 mg/day itraconazole for the treatment of cutaneous sporotrichosis. A bidirectional cohort study was conducted on 55 patients receiving 250 mg/day terbinafine and 249 patients receiving 100 mg/day itraconazole. The latter patients were matched for age and clinical form to the terbinafine group at a ratio of 5:1. Sporothrix schenckii was isolated by culture from all patients (age range: 18-70 years), who were submitted to the standard care protocol consisting of clinical and laboratory evaluation and periodic visits. Cure was observed in 51 (92.7%) patients of the terbinafine group and 229 (92%) of the itraconazole group within a similar mean period of time (11.5 and 11.8 weeks, respectively). An increase in the terbinafine dose to 500 mg was necessary in two patients due to the lack of a response, and one patient presented recurrence. In the itraconazole group, two patients required a dose increase and three presented recurrence. Adverse events were equally frequent among patients receiving terbinafine (n = 4, 7.3%) and itraconazole (n = 19, 7.6%) and were generally mild without the need for drug discontinuation, except for two patients of the itraconazole group. Terbinafine administered at a daily dose of 250 mg is an effective and well-tolerated option for the treatment of cutaneous sporotrichosis.

  14. Intermittent prednisone therapy in Duchenne muscular dystrophy : A randomized controlled trial

    NARCIS (Netherlands)

    Beenakker, EAC; Fock, JM; Van Tol, M; Maurits, NM; Koopman, HM; Brouwer, OF; Van der Hoeven, JH

    Background: Prednisone treatment is used to prolong ambulation in patients with Duchenne muscular dystrophy (DMD). However, since severe adverse effects often accompany prednisone treatment, it is debatable whether the benefits of prednisone treatment outweigh its adverse effects. Objectives: To

  15. Melphalan, prednisone, thalidomide and defibrotide in relapsed/refractory multiple myeloma: results of a multicenter phase I/II trial.

    Science.gov (United States)

    Palumbo, Antonio; Larocca, Alessandra; Genuardi, Mariella; Kotwica, Katarzyna; Gay, Francesca; Rossi, Davide; Benevolo, Giulia; Magarotto, Valeria; Cavallo, Federica; Bringhen, Sara; Rus, Cecilia; Masini, Luciano; Iacobelli, Massimo; Gaidano, Gianluca; Mitsiades, Constantine; Anderson, Kenneth; Boccadoro, Mario; Richardson, Paul

    2010-07-01

    Defibrotide is a novel orally bioavailable polydisperse oligonucleotide with anti-thrombotic and anti-adhesive effects. In SCID/NOD mice, defibrotide showed activity in human myeloma xenografts. This phase I/II study was conducted to identify the most appropriate dose of defibrotide in combination with melphalan, prednisone and thalidomide in patients with relapsed and relapsed/refractory multiple myeloma, and to determine its safety and tolerability as part of this regimen. This was a phase I/II, multicenter, dose-escalating, non-comparative, open label study. Oral melphalan was administered at a dose of 0.25 mg/kg on days 1-4, prednisone at a dose of 1.5 mg/kg also on days 1-4 and thalidomide at a dose of 50-100 mg/day continuously. Defibrotide was administered orally at three dose-levels: 2.4, 4.8 or 7.2 g on days 1-4 and 1.6, 3.2, or 4.8 g on days 5-35. Twenty-four patients with relapsed/refractory multiple myeloma were enrolled. No dose-limiting toxicity was observed. In all patients, the complete response plus very good partial response rate was 9%, and the partial response rate was 43%. The 1-year progression-free survival and 1-year overall survival rates were 34% and 90%, respectively. The most frequent grade 3-4 adverse events included neutropenia, thrombocytopenia, anemia and fatigue. Deep vein thrombosis was reported in only one patient. This combination of melphalan, prednisone and thalidomide together with defibrotide showed anti-tumor activity with a favorable tolerability. The maximum tolerated dose of defibrotide was identified as 7.2 g p.o. on days 1-4 followed by 4.8 g p.o. on days 5-35. Further trials are needed to confirm the role of this regimen and to evaluate the combination of defibrotide with new drugs.

  16. Atorvastatin 10 mg plus ezetimibe 10mg compared with atorvastatin 20 mg: impact on the lipid profile in Japanese patients with abnormal glucose tolerance and coronary artery disease.

    Science.gov (United States)

    Uemura, Yusuke; Watarai, Masato; Ishii, Hideki; Koyasu, Masayoshi; Takemoto, Kenji; Yoshikawa, Daiji; Shibata, Rei; Matsubara, Tatsuaki; Murohara, Toyoaki

    2012-01-01

    Oxidized low-density lipoprotein (LDL) cholesterol is a sensitive lipid marker for predicting atherosclerosis. Ezetimibe and statins are reported to decrease both LDL cholesterol and oxidized LDL cholesterol. This prospective randomized open-label crossover study compared combination therapy with atorvastatin plus ezetimibe versus high-dose atorvastatin monotherapy. Changes in serum lipids, including malondialdehyde-modified LDL (MDA-LDL) as a representative form of oxidized LDL cholesterol, and glucose metabolism were assessed. The subjects were 39 Japanese patients with coronary artery disease and type 2 diabetes or impaired glucose tolerance who were taking 10 mg/day of atorvastatin (30 men and 9 women with a mean age of 67.8 years). They were randomized to a group that first received add-on ezetimibe (10 mg/day) or a group that first received atorvastatin monotherapy at a higher dose of 20 mg/day. Both treatments were given for 12 weeks each in a crossover fashion. Add-on ezetimibe significantly decreased MDA-LDL (109.0 ± 31.9 mg/dl to 87.7 ± 29.4 mg/dl, p=0.0009), while up-titration of atorvastatin did not. The decrease with add-on ezetimibe was significantly greater than with up-titration of atorvastatin (p=0.0006). Total cholesterol and LDL cholesterol were significantly decreased by both treatments, but the percent reduction with add-on ezetimibe was significantly greater (pHigh-density lipoprotein cholesterol was significantly increased by both treatments and there was no significant difference between them. The apolipoprotein B/apolipoprotein A-I ratio and remnant-like particle cholesterol were only significantly decreased by add-on ezetimibe. Both treatments caused similar elevation of hemoglobin A(1c). In Japanese patients with type 2 diabetes or impaired glucose tolerance and coronary artery disease, adding ezetimibe (10 mg/day) to atorvastatin (10 mg/day) significantly improved the lipid profile compared with atorvastatin monotherapy at 20 mg

  17. Effect of low-dose prednisone (with calcium and calcitriol supplementation) on calcium and bone metabolism in healthy volunteers

    NARCIS (Netherlands)

    Lems, W. F.; van Veen, G. J.; Gerrits, M. I.; Jacobs, J. W.; Houben, H. H.; van Rijn, H. J.; Bijlsma, J. W.

    1998-01-01

    The administration of moderate to high doses of corticosteroids is associated with bone loss. This probably results from the uncoupling of bone formation (decreased) and bone resorption (unchanged or increased). We examined the effect of low-dose (10 mg/day) prednisone (LDP) and the possible

  18. Casodex (bicalutamide) 150-mg monotherapy compared with castration in patients with previously untreated nonmetastatic prostate cancer

    DEFF Research Database (Denmark)

    Iversen, P; Tyrrell, C J; Kaisary, A V

    1998-01-01

    To compare the efficacy, tolerability, and quality of life benefits of bicalutamide (Casodex) 150-mg/day monotherapy and castration in previously untreated nonmetastatic (M0) advanced prostate cancer....

  19. Nicotine chewing gum (2 mg, 4 mg) and cigarette smoking: comparative effects upon vigilance and heart rate.

    Science.gov (United States)

    Parrott, A C; Winder, G

    1989-01-01

    Sixteen male smokers, abstinent the morning before testing, were assessed under four conditions: placebo chewing gum, 2 mg nicotine chewing gum, 4 mg nicotine gum, and cigarette smoking. Placebo gum was administered in the cigarette condition, while sham smoking occurred in the gum conditions. Pre-drug administration and post-drug difference scores were calculated for each assessment measure: rapid visual information processing (RVIP), memory for new information, and heart rate. Nicotine raised heart rate in a significant monotonic dose-related manner (P less than 0.001): placebo +0.2; 2 mg gum +5.1; 4 mg gum +9.8; cigarette +17.5 bpm. Rapid visual information processing target detections were also significantly related to dose (P less than 0.01), with this increased vigilance significant under 4 mg nicotine gum and cigarette smoking. Memory task performance was not significantly affected. Self-reported feelings of alertness/energy were higher while smoking than under placebo or 4 mg gum. Complaints about the taste of the 4 mg nicotine gum were frequent.

  20. A double-blind study comparing ibuprofen 1800 mg or 2400 mg daily and placebo in sports injuries.

    Science.gov (United States)

    Hutson, M A

    1986-01-01

    In a double-blind, placebo-controlled study of forty-six patients with acute ligamentous damage of the knee, ibuprofen in dosages 1800 mg and 2400 mg produced significant improvements in joint mobility, weight bearing ability and match fitness. Joint effusion, pain on stress and pain severity was significantly improved by all three treatments. Only two patients reported side-effects (one while taking placebo and one taking ibuprofen 2400 mg). The study confirmed the efficacy and excellent tolerance to ibuprofen in patients with sports injuries to the knee.

  1. Effect of Ginkgo biloba extract in combined with prednisone on the arterial blood gas and pulmonary function in patients with idiopathic pulmonary fibrosis

    Directory of Open Access Journals (Sweden)

    Zhen-Chun Shi

    2016-09-01

    Full Text Available Objective: To explore the effect of Ginkgo biloba extract (EGb in combined with prednisone on the arterial blood gas and pulmonary function in patients with idiopathic pulmonary fibrosis (IPF. Methods: A total of 76 patients with IPF who were admitted in our hospital from March, 2015 to March, 2016 were included in the study and randomized into the observation group and the control group. The patients in the two groups were given oxygen inhalation, bronchodilator agents, phlegm dissipating and asthma relieving, anti-infection, and other supporting treatments. The patients in the control group were orally given prednisone (0.5 mg/ kg.d, continuously for 4 weeks, then in a dose of 0.25 mg/kg.d, continuously for 8 weeks, and finally the dosage was reduced to 0.125 mg/kg.d. On this basis, the patients in the observation group were given additional EGb, i.e. Ginkgo leaf capsule, 1 g/time, 3 times/d, continuously for 12 weeks. The efficacy was evaluated after 12-week treatment. PaO2, PaCO2, P(A-aO2, and SaO2 before and after treatment were detected. FVC, FEV1/FVC, MVV, TLC, and DLCO before and after treatment were determined. Results: PaO2, PaCO2, and SaO2 after treatment were significantly elevated, while P(A-aO2 was significantly reduced when compared with before treatment. The comparison of PaO2 and P(A-aO2 between the two groups was statistically significant, while the comparison of PaCO2 and SaO2 between the two groups was not statistically significant. After treatment, FVC, FEV1/FVC, MVV, TLC, and DLCO in the two groups were significantly elevated when compared with before treatment, and those in the observation group were significantly superior to those in the control group. Conclusions: EGb in combined with prednisone in the treatment of IPF can effectively improve the arterial blood gas indicators and pulmonary function, and enhance the patients’ living qualities; therefore, it deserves to be widely recommended.

  2. Effect of abiraterone acetate plus prednisone on the pharmacokinetics of dextromethorphan and theophylline in patients with metastatic castration-resistant prostate cancer.

    Science.gov (United States)

    Chi, K N; Tolcher, A; Lee, P; Rosen, P J; Kollmannsberger, C K; Papadopoulos, K P; Patnaik, A; Molina, A; Jiao, J; Pankras, C; Kaiser, B; Bernard, A; Tran, N; Acharya, M

    2013-01-01

    To assess the effect of abiraterone acetate plus prednisone on the pharmacokinetics of dextromethorphan HBr (CYP2D6 substrate) and theophylline (CYP1A2 substrate) in patients with metastatic castration-resistant prostate cancer (mCRPC). Men with progressive metastatic mCRPC who failed gonadotropin-releasing hormone therapy and ≥1 lines of chemotherapy were enrolled. Patients received two doses of dextromethorphan HBr-30 mg (n = 18; group A) or theophylline-100 mg (n = 16; group B) under fasting conditions; one dose on cycle 1, day -8, and the other dose on cycle 1, day 8. Only patients with extensive CYP2D6 metabolizing status were assigned to group A. All patients received continuous daily oral abiraterone acetate (1,000 mg) plus prednisone (10 mg) starting on cycle 1, day 1. Coadministration of abiraterone acetate plus prednisone increased the systemic exposure of dextromethorphan by approximately 100%. Ratios of geometric means for maximum plasma concentration (C(max)) (275.36%) and area under plasma concentration-time curves from time 0 to 24 h (AUC(24h)) (268.14%) of dextromethorphan were outside the bioequivalence limit. The pharmacokinetics of theophylline was unaltered following coadministration of abiraterone acetate plus prednisone. Ratios of geometric means [C(max); 102.36% and AUC(24h); 108.03%] of theophylline exposure parameters were within the bioequivalence limit. The safety profile of abiraterone acetate was consistent with reported toxicities. Abiraterone acetate plus prednisone increased the exposure of dextromethorphan, suggesting a need for caution when coadministrating with known CYP2D6 substrates. The pharmacokinetics of theophylline was unaffected when coadministered with abiraterone acetate plus prednisone.

  3. Aflibercept versus placebo in combination with docetaxel and prednisone for treatment of men with metastatic castration-resistant prostate cancer (VENICE): a phase 3, double-blind randomised trial.

    Science.gov (United States)

    Tannock, Ian F; Fizazi, Karim; Ivanov, Sergey; Karlsson, Camilla Thellenberg; Fléchon, Aude; Skoneczna, Iwona; Orlandi, Francisco; Gravis, Gwenaelle; Matveev, Vsevolod; Bavbek, Sevil; Gil, Thierry; Viana, Luciano; Arén, Osvaldo; Karyakin, Oleg; Elliott, Tony; Birtle, Alison; Magherini, Emmanuelle; Hatteville, Laurence; Petrylak, Daniel; Tombal, Bertrand; Rosenthal, Mark

    2013-07-01

    Docetaxel plus prednisone is standard first-line chemotherapy for men with metastatic castrate-resistant prostate cancer. Aflibercept is a recombinant human fusion protein that binds A and B isoforms of VEGF and placental growth factor, thereby inhibiting angiogenesis. We assessed whether the addition of aflibercept to docetaxel and prednisone would improve overall survival in men with metastatic castrate-resistant prostate cancer compared with the addition of placebo to docetaxel and prednisone. VENICE was a phase 3, multicentre, randomised double-blind placebo-controlled parallel group study done in 31 countries (187 sites). Men with metastatic castrate-resistant prostate cancer, adequate organ function, and no prior chemotherapy were treated with docetaxel (75 mg/m(2) intravenously every 3 weeks) and oral prednisone (5 mg twice daily) and randomly allocated (1:1) to receive aflibercept (6 mg/kg) or placebo, intravenously, every 3 weeks. Treatment allocation was done centrally via an interactive voice response system, using a computer-generated sequence with a permuted-block size of four and stratified according Eastern Co-operative Group performance status (0-1 vs 2). Patients, investigators, and other individuals responsible for study conduct and data analysis were masked to treatment assignment. Aflibercept or placebo vials were supplied in identical boxes. The primary endpoint was overall survival using intention-to-treat analysis. This is the primary analysis of the completed trial. The study is registered with ClinicalTrials.gov, number NCT00519285 FINDINGS: Between Aug 17, 2007, and Feb 11, 2010, 1224 men were randomly allocated to treatment: 612 to each group. At final analysis, median follow-up was 35 months (IQR 29-41) and 873 men had died. Median overall survival was 22·1 months (95·6% CI 20·3-24·1) in the aflibercept group and 21·2 months (19·6-23·8) in the placebo group (stratified hazard ratio 0·94, 95·6% CI 0·82-1·08; p=0·38). We

  4. Comparative study of thermoluminescent properties of LiF: Mg, Cu, P, LiF: Mg, Ti and TLD-100 irradiated with X-rays

    International Nuclear Information System (INIS)

    Azorin, J.; Rivera, T.; Gonzalez, P.; Ortega, X.; Ginjaume, M.

    2000-01-01

    The thermoluminescent properties (Tl) of LiF: Mg, Cu, P, and LiF: Mg, Ti, were investigated both developed in Mexico and comparing them with the properties of TLD-100 when they are exposure to X-rays. The Tl curve of LiF: Mg, Cu, P exhibited two peaks at 200 and 300 Centigrade. Its response Tl in function of dose resulted linear in the interval of 0.5 Gy until 5 Gy and its sensitivity to X-ray was around 25 times greater that of the TLD-100. Also it was measured the Tl response of the three materials in function of photon energy. The results showed that LiF: Mg, Cu, P has potential to be used as X-ray dosemeter. (Author)

  5. A comparative study of Mg and Pt contacts on semi-insulating GaAs: Electrical and XPS characterization

    Energy Technology Data Exchange (ETDEWEB)

    Dubecký, F., E-mail: elekfdub@savba.sk [Institute of Electrical Engineering, SAS, Dúbravská cesta 9, Bratislava, SK-84104 (Slovakia); Kindl, D.; Hubík, P. [Institute of Physics CAS, v.v.i., Cukrovarnická 10, CZ-16200 Prague (Czech Republic); Mičušík, M. [Polymer Institute, SAS, Dúbravská cesta 9, Bratislava, SK-84541 (Slovakia); Dubecký, M. [Department of Physics, Faculty of Science, University of Ostrava, 30. dubna 22, CZ-70103 Ostrava 1 (Czech Republic); Boháček, P.; Vanko, G. [Institute of Electrical Engineering, SAS, Dúbravská cesta 9, Bratislava, SK-84104 (Slovakia); Gombia, E. [IMEM-CNR, Parco area delle Scienze 37/A, Parma, I-43010 (Italy); Nečas, V. [Faculty of Electrical Engineering and Information Technology, SUT, Ilkovičova 3, Bratislava, SK-81219 (Slovakia); Mudroň, J. [Department of Electronics, Academy of Armed Forces, Demänová 393, Liptovský Mikuláš, SK-03106 (Slovakia)

    2017-02-15

    Highlights: • Explored were diodes with full-area low/high work function metal contacts on semi-insulating GaAs (S). • The Mg-S-Mg diode is promising for radiation detectors for its low high-field current. • The XPS analysis of Mg-S interface shows presence of MgO instead of Mg metal. - Abstract: We present a comparative study of the symmetric metal-SI GaAs-metal (M-S-M) diodes with full-area contacts on both device sides, in order to demonstrate the effect of contact metal work function in a straightforward way. We compare the conventional high work function Pt contact versus the less explored low work function Mg contact. The Pt-S-Pt, Mg-S-Mg and mixed Mg-S-Pt structures are characterized by the current-voltage measurements, and individual Pt-S and Mg-S contacts are investigated by the X-ray photoelectron spectroscopy (XPS). The transport measurements of Mg-S-Pt structure show a significant current decrease at low bias while the Mg-S-Mg structure shows saturation current at high voltages more than an order of magnitude lower with respect to the Pt-S-Pt reference. The phenomena observed in Mg-containing samples are explained by the presence of insulating MgO layer at the M-S interface, instead of the elementary Mg, as confirmed by the XPS analysis. Alternative explanations of the influence of MgO layer on the effective resistance of the structures are presented. The reported findings have potential applications in M-S-M sensors and radiation detectors based on SI GaAs.

  6. Comparative study of neutron irradiation and carbon doping in MgB2 single crystals

    International Nuclear Information System (INIS)

    Krutzler, C.; Zehetmayer, M.; Eisterer, M.; Weber, H. W.; Zhigadlo, N. D.; Karpinski, J.

    2007-01-01

    We compare the reversible and irreversible magnetic properties of superconducting carbon doped and undoped MgB 2 single crystals before and after neutron irradiation. A large number of samples with transition temperatures between 38.3 and 22.8 K allows us to study the effects of disorder systematically. Striking similarities are found in the modification of the reversible parameters by irradiation and doping, which are discussed in terms of impurity scattering and changes of the Fermi surface. The irreversible properties are influenced by two counteracting mechanisms: they are enhanced by the newly introduced pinning centers but degraded by changes in the thermodynamic properties. Accordingly, the large neutron induced defects and the small defects from carbon doping lead to significantly different effects on the irreversible properties. Finally, the fishtail effect caused by all kinds of disorder is discussed in terms of an order-disorder transition of the flux-line lattice

  7. Prednison provokes serum and vasoactive substances in a mice model of immune thrombocytopenia

    Directory of Open Access Journals (Sweden)

    Ling Zhang

    2016-09-01

    Conclusion: In this study, the β-EP, VIP, 5-HT and NE contents in ITP mice injected with GP-APS were changed by prednison. It shows that prednison as the first-line therapy for ITP with effective hemostasis function is likely to increasing the contents of VIP and 5-HT. These results suggest the therapeutic value of prednison for the treatment of ITP.

  8. A Randomised Controlled Trial of High Dose, Inhaled Budesonide Versus Oral Prednisone in Patients Discharged from the Emergency Department following an Acute Asthma Exacerbation

    Directory of Open Access Journals (Sweden)

    J Mark FitzGerald

    2000-01-01

    Full Text Available OBJECTIVE: Prednisone (PRED is recommended at discharge to reduce the relapse rate following emergency treatment for an asthmatic attack. However, PRED has systemic side effects. Inhaled anti-inflammatory medications, such as budesonide (BUD, are well tolerated. This study was designed to compare the effectiveness of PRED and BUD on relapse rate.

  9. Bioequivalence study of a new sildenafil 100 mg orodispersible film compared to the conventional film-coated 100 mg tablet administered to healthy male volunteers

    Science.gov (United States)

    Radicioni, Milko; Castiglioni, Chiara; Giori, Andrea; Cupone, Irma; Frangione, Valeria; Rovati, Stefano

    2017-01-01

    A new orodispersible film formulation of the phosphodiesterase type 5 inhibitor, sildenafil, has been developed to examine the advantages of an orally disintegrating film formulation and provide an alternative to the current marketed products for the treatment of erectile dysfunction. The pharmacokinetics of the sildenafil 100 mg orodispersible film (IBSA) was compared to that of the conventional marketed 100 mg film-coated tablet (Viagra®) after single-dose administration to 53 healthy male volunteers (aged 18–51 years) in a randomized, open, two-way crossover bioequivalence study. Each subject received a single oral dose of 100 mg of sildenafil as test or reference formulation administered under fasting conditions at each of the two study periods according to a randomized crossover design. There was a washout interval of ≥7 days between the two administrations of the investigational medicinal products. Blood samples for pharmacokinetic analysis were collected up to 24 h post-dosing. The primary objective was to compare the rate (peak plasma concentration; Cmax) and extent (area under the curve [AUC] from administration to last observed concentration time; AUC0–t) of sildenafil absorption after single-dose administration of test and reference. Secondary endpoints were observed to describe the plasma pharmacokinetic profiles of sildenafil and its metabolite N-desmethyl-sildenafil relative bioavailability and safety profile after single-dose administration. The mean sildenafil and N-desmethyl-sildenafil plasma concentration–time profiles up to 24 h after single-dose administration of sildenafil 100 mg orodispersible film and film-coated tablet were nearly superimposable. The bioequivalence test was fully satisfied for sildenafil and N-desmethyl-sildenafil in terms of rate and extent of bioavailability. Adverse events occurred at similar rates for the two formulations and were of mild-to-moderate severity. The results suggest that the new orodispersible film

  10. Pharmacologic manipulation of human erythrocyte 2,3-diphosphoglycerate levels by prednisone administration.

    Science.gov (United States)

    Silken, A B

    1975-02-01

    Erythrocyte 2,3-diphosphoglycerate (2,3-DPG) concentrations in 10 patients with acute lymphoblastic leukemia rose 21.3%(P smaller than 0.02) after 3 weeks of prednisone and vincristine therapy, and returned to pretreatment level 2 weeks after therapy had been discontinued. The mean 2,3-DPG level of three patients on vincristine alone did not vary significantly from the control level of the leukemia patients on prednisone and vincristine. No significant change in serum inorganic phosphate level was observed. The mean erythrocyte 2,3-DPG concentration of 17 nephrotic syndrome patients being treated with chronic prednisone therapy was 14.0% higher than a control group of 20 nephrotic syndrome patients not being treated with prednisone (P small than 0.01). A significant positive correlation was observed between the dose of prednisone and 2,3-DPG level.

  11. [Granulomatous mastitis in a patient treated with prednisone].

    Science.gov (United States)

    Fetveit, T; Uggerud, R

    1993-09-30

    A 36 year old woman, mother of a two year old child developed, in the course of one night, a tender mass in the upper medial quadrant of the left mamma. Treatment with antibiotics had no effect, and after a week the patient was admitted to hospital for drainage of the abscess and further examination. She had then developed reactive arthritis. Histological examination of a specimen from the mamma revealed lobular granulomatous mastitis. This connection has not been described before in the literature. Further examination showed no signs of infectious disease or sarcoidosis. Surgical drainage had only a minor effect on the breast-mass. The patient was treated with prednisone for six months, and after one year of observation the mass has disappeared, but the arthralgias persists.

  12. Sample preparation methods for scanning electron microscopy of homogenized Al-Mg-Si billets: A comparative study

    International Nuclear Information System (INIS)

    Österreicher, Johannes Albert; Kumar, Manoj; Schiffl, Andreas; Schwarz, Sabine; Hillebrand, Daniel; Bourret, Gilles Remi

    2016-01-01

    Characterization of Mg-Si precipitates is crucial for optimizing the homogenization heat treatment of Al-Mg-Si alloys. Although sample preparation is key for high quality scanning electron microscopy imaging, most common methods lead to dealloying of Mg-Si precipitates. In this article we systematically evaluate different sample preparation methods: mechanical polishing, etching with various reagents, and electropolishing using different electrolytes. We demonstrate that the use of a nitric acid and methanol electrolyte for electropolishing a homogenized Al-Mg-Si alloy prevents the dissolution of Mg-Si precipitates, resulting in micrographs of higher quality. This preparation method is investigated in depth and the obtained scanning electron microscopy images are compared with transmission electron micrographs: the shape and size of Mg-Si precipitates appear very similar in either method. The scanning electron micrographs allow proper identification and measurement of the Mg-Si phases including needles with lengths of roughly 200 nm. These needles are β″ precipitates as confirmed by high resolution transmission electron microscopy. - Highlights: •Secondary precipitation in homogenized 6xxx Al alloys is crucial for extrudability. •Existing sample preparation methods for SEM are improvable. •Electropolishing with nitric acid/methanol yields superior quality in SEM. •The obtained micrographs are compared to TEM micrographs.

  13. Sample preparation methods for scanning electron microscopy of homogenized Al-Mg-Si billets: A comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Österreicher, Johannes Albert; Kumar, Manoj [LKR Light Metals Technologies Ranshofen, Austrian Institute of Technology, Postfach 26, 5282 Ranshofen (Austria); Schiffl, Andreas [Hammerer Aluminium Industries Extrusion GmbH, Lamprechtshausener Straße 69, 5282 Ranshofen (Austria); Schwarz, Sabine [University Service Centre for Transmission Electron Microscopy, Vienna University of Technology, Wiedner Hauptstr. 8-10, 1040 Wien (Austria); Hillebrand, Daniel [Hammerer Aluminium Industries Extrusion GmbH, Lamprechtshausener Straße 69, 5282 Ranshofen (Austria); Bourret, Gilles Remi, E-mail: gilles.bourret@sbg.ac.at [Department of Materials Science and Physics, University of Salzburg, Hellbrunner Straße 34, 5020 Salzburg (Austria)

    2016-12-15

    Characterization of Mg-Si precipitates is crucial for optimizing the homogenization heat treatment of Al-Mg-Si alloys. Although sample preparation is key for high quality scanning electron microscopy imaging, most common methods lead to dealloying of Mg-Si precipitates. In this article we systematically evaluate different sample preparation methods: mechanical polishing, etching with various reagents, and electropolishing using different electrolytes. We demonstrate that the use of a nitric acid and methanol electrolyte for electropolishing a homogenized Al-Mg-Si alloy prevents the dissolution of Mg-Si precipitates, resulting in micrographs of higher quality. This preparation method is investigated in depth and the obtained scanning electron microscopy images are compared with transmission electron micrographs: the shape and size of Mg-Si precipitates appear very similar in either method. The scanning electron micrographs allow proper identification and measurement of the Mg-Si phases including needles with lengths of roughly 200 nm. These needles are β″ precipitates as confirmed by high resolution transmission electron microscopy. - Highlights: •Secondary precipitation in homogenized 6xxx Al alloys is crucial for extrudability. •Existing sample preparation methods for SEM are improvable. •Electropolishing with nitric acid/methanol yields superior quality in SEM. •The obtained micrographs are compared to TEM micrographs.

  14. Evaluation of prognostic markers for canine mast cell tumors treated with vinblastine and prednisone

    Directory of Open Access Journals (Sweden)

    Yuzbasiyan-Gurkan Vilma

    2008-08-01

    Full Text Available Abstract Background Canine cutaneous mast cell tumor (MCT is a common neoplastic disease associated with a variable biologic behavior. Surgery remains the primary treatment for canine MCT; however, radiation therapy (RT and chemotherapy are commonly used to treat aggressive MCT. The goals of this study were to evaluate the prognostic utility of histologic grade, c-KIT mutations, KIT staining patterns, and the proliferation markers Ki67 and AgNORs in dogs postoperatively treated with vinblastine and prednisone +/- RT, and to compare the outcome of dogs treated with post-operative chemotherapy +/- RT to that of a prognostically matched group treated with surgery alone. Associations between prognostic markers and survival were evaluated. Disease-free intervals (DFI and overall survival times (OS of dogs with similar pretreatment prognostic indices postoperatively treated with chemotherapy were compared to dogs treated with surgery alone. Results Histologic grade 3 MCTs, MCTs with c-KIT mutations, MCTs with increased cytoplasmic KIT, and MCTs with increased Ki67 and AgNOR values were associated with decreased DFI and OS. Dogs with histologic grade 3 MCT had significantly increased DFI and OS when treated with chemotherapy vs. surgery alone. Although not statistically significant due to small sample sizes, MCTs with c-KIT mutations had increased DFI and OS when treated with chemotherapy vs. surgery alone. Conclusion and clinical importance This study confirms the prognostic value of histologic grade, c-KIT mutations, KIT staining patterns, and proliferation analyses for canine MCT. Additionally, the results of this study further define the benefit of postoperative vinblastine and prednisone for histologic grade 3 MCTs.

  15. Bioequivalence study of a new sildenafil 100 mg orodispersible film compared to the conventional film-coated 100 mg tablet administered to healthy male volunteers

    Directory of Open Access Journals (Sweden)

    Radicioni M

    2017-04-01

    Full Text Available Milko Radicioni,1 Chiara Castiglioni,1 Andrea Giori,2 Irma Cupone,3 Valeria Frangione,4 Stefano Rovati4 1CROSS Research S.A., Phase I Unit, Arzo, Switzerland; 2IBSA Farmaceutici Italia, Lodi, Italy; 3Bouty S.p.A., Strada Padana Superiore, Cassina De’ Pecchi, Italy; 4IBSA Institut Biochimique S.A., Pambio-Noranco, Switzerland Abstract: A new orodispersible film formulation of the phosphodiesterase type 5 inhibitor, sildenafil, has been developed to examine the advantages of an orally disintegrating film formulation and provide an alternative to the current marketed products for the treatment of erectile dysfunction. The pharmacokinetics of the sildenafil 100 mg orodispersible film (IBSA was compared to that of the conventional marketed 100 mg film-coated tablet (Viagra® after single-dose administration to 53 healthy male volunteers (aged 18–51 years in a randomized, open, two-way crossover bioequivalence study. Each subject received a single oral dose of 100 mg of sildenafil as test or reference formulation administered under fasting conditions at each of the two study periods according to a randomized crossover design. There was a washout interval of ≥7 days between the two administrations of the investigational medicinal products. Blood samples for pharmacokinetic analysis were collected up to 24 h post-dosing. The primary objective was to compare the rate (peak plasma concentration; Cmax and extent (area under the curve [AUC] from administration to last observed concentration time; AUC0–t of sildenafil absorption after single-dose administration of test and reference. Secondary endpoints were observed to describe the plasma pharmacokinetic profiles of sildenafil and its metabolite N-desmethyl-sildenafil relative bioavailability and safety profile after single-dose administration. The mean sildenafil and N-desmethyl-sildenafil plasma concentration–time profiles up to 24 h after single-dose administration of sildenafil 100 mg

  16. Deuterium absorption in Mg70Al30 thin films with bilayer catalysts: A comparative neutron reflectometry study

    International Nuclear Information System (INIS)

    Poirier, Eric; Harrower, Chris T.; Kalisvaart, Peter; Bird, Adam; Teichert, Anke; Wallacher, Dirk; Grimm, Nico; Steitz, Roland; Mitlin, David; Fritzsche, Helmut

    2011-01-01

    Highlights: → Mg 70 Al 30 thin films studied for hydrogen absorption using in situ neutron reflectometry. → Films with Ta/Pd, Ti/Pd and Ni/Pd bilayer catalysts systematically compared. → Measurements reveals deuterium spillover from the catalysts to the MgAl phase. → The use of Ti-Pd bilayer offers best results in terms of amount absorbed and kinetics. → Key results cross-checked with X-ray reflectometry. - Abstract: We present a neutron reflectometry study of deuterium absorption in thin films of Al-containing Mg alloys capped with a Ta/Pd, Ni/Pd and Ti/Pd-catalyst bilayer. The measurements were performed at room temperature over the 0-1 bar pressure range under quasi-equilibrium conditions. The modeling of the measurements provided a nanoscale representation of the deuterium profile in the layers at different stages of the absorption process. The absorption mechanism observed was found to involve spillover of atomic deuterium from the catalyst layer to the Mg alloy phase, followed by the deuteration of the Mg alloy. Complete deuteration of the Mg alloy occurs in a pressure range between 100 and 500 mbar, dependent on the type of bilayer catalyst. The use of a Ti/Pd bilayer catalyst yielded the best results in terms of both storage density and kinetic properties.

  17. Prednisone and vardenafil hydrochloride for refractory levamisole-induced vasculitis.

    Science.gov (United States)

    Mandrell, Joshua; Kranc, Christina L

    2016-08-01

    Levamisole is an immunomodulatory drug that was previously used to treat various medical conditions, including parasitic infections, nephrotic syndrome, and colorectal cancer. Over the last few years, increasing amounts of levamisole have been used as an adulterant in cocaine. Levamisole-cut cocaine has become a concern because it is known to cause a necrotizing purpuric rash, autoantibody production, and life-threatening leukopenia. Mixed histologic findings of vasculitis and thrombosis are characteristic of levamisole-induced purpura. The recommended management of levamisole-induced vasculitis currently involves withdrawal of the culprit along with supportive treatment. We describe a patient with levamisole-induced vasculitis who continued to develop skin lesions despite self-reported cocaine cessation. Complete resolution of cutaneous disease occurred with the addition of oral prednisone and vardenafil hydrochloride, suggesting the possibility of a new treatment option in patients with refractory disease. In addition, we review the clinical presentation, disease course, diagnostic approach, laboratory findings, histology, and management of levamisole-induced vasculitis. The harmful effects of levamisole-cut cocaine are serious enough that public alerts have been issued to increase awareness. Clinicians should consider the possibility of levamisole exposure in cocaine users presenting with any combination of fever, neutropenia, and necrotic skin lesions, especially in acral areas including the ears.

  18. Functional and molecular effects of arginine butyrate and prednisone on muscle and heart in the mdx mouse model of Duchenne Muscular Dystrophy.

    Directory of Open Access Journals (Sweden)

    Alfredo D Guerron

    2010-06-01

    Full Text Available The number of promising therapeutic interventions for Duchenne Muscular Dystrophy (DMD is increasing rapidly. One of the proposed strategies is to use drugs that are known to act by multiple different mechanisms including inducing of homologous fetal form of adult genes, for example utrophin in place of dystrophin.In this study, we have treated mdx mice with arginine butyrate, prednisone, or a combination of arginine butyrate and prednisone for 6 months, beginning at 3 months of age, and have comprehensively evaluated the functional, biochemical, histological, and molecular effects of the treatments in this DMD model. Arginine butyrate treatment improved grip strength and decreased fibrosis in the gastrocnemius muscle, but did not produce significant improvement in muscle and cardiac histology, heart function, behavioral measurements, or serum creatine kinase levels. In contrast, 6 months of chronic continuous prednisone treatment resulted in deterioration in functional, histological, and biochemical measures. Arginine butyrate-treated mice gene expression profiling experiments revealed that several genes that control cell proliferation, growth and differentiation are differentially expressed consistent with its histone deacetylase inhibitory activity when compared to control (saline-treated mdx mice. Prednisone and combination treated groups showed alterations in the expression of genes that control fibrosis, inflammation, myogenesis and atrophy.These data indicate that 6 months treatment with arginine butyrate can produce modest beneficial effects on dystrophic pathology in mdx mice by reducing fibrosis and promoting muscle function while chronic continuous treatment with prednisone showed deleterious effects to skeletal and cardiac muscle. Our results clearly indicate the usefulness of multiple assays systems to monitor both beneficial and toxic effects of drugs with broad range of in vivo activity.

  19. Functional and molecular effects of arginine butyrate and prednisone on muscle and heart in the mdx mouse model of Duchenne Muscular Dystrophy.

    Science.gov (United States)

    Guerron, Alfredo D; Rawat, Rashmi; Sali, Arpana; Spurney, Christopher F; Pistilli, Emidio; Cha, Hee-Jae; Pandey, Gouri S; Gernapudi, Ramkishore; Francia, Dwight; Farajian, Viken; Escolar, Diana M; Bossi, Laura; Becker, Magali; Zerr, Patricia; de la Porte, Sabine; Gordish-Dressman, Heather; Partridge, Terence; Hoffman, Eric P; Nagaraju, Kanneboyina

    2010-06-21

    The number of promising therapeutic interventions for Duchenne Muscular Dystrophy (DMD) is increasing rapidly. One of the proposed strategies is to use drugs that are known to act by multiple different mechanisms including inducing of homologous fetal form of adult genes, for example utrophin in place of dystrophin. In this study, we have treated mdx mice with arginine butyrate, prednisone, or a combination of arginine butyrate and prednisone for 6 months, beginning at 3 months of age, and have comprehensively evaluated the functional, biochemical, histological, and molecular effects of the treatments in this DMD model. Arginine butyrate treatment improved grip strength and decreased fibrosis in the gastrocnemius muscle, but did not produce significant improvement in muscle and cardiac histology, heart function, behavioral measurements, or serum creatine kinase levels. In contrast, 6 months of chronic continuous prednisone treatment resulted in deterioration in functional, histological, and biochemical measures. Arginine butyrate-treated mice gene expression profiling experiments revealed that several genes that control cell proliferation, growth and differentiation are differentially expressed consistent with its histone deacetylase inhibitory activity when compared to control (saline-treated) mdx mice. Prednisone and combination treated groups showed alterations in the expression of genes that control fibrosis, inflammation, myogenesis and atrophy. These data indicate that 6 months treatment with arginine butyrate can produce modest beneficial effects on dystrophic pathology in mdx mice by reducing fibrosis and promoting muscle function while chronic continuous treatment with prednisone showed deleterious effects to skeletal and cardiac muscle. Our results clearly indicate the usefulness of multiple assays systems to monitor both beneficial and toxic effects of drugs with broad range of in vivo activity.

  20. The pharmacokinetics of cytarabine administered subcutaneously, combined with prednisone, in dogs with meningoencephalomyelitis of unknown etiology.

    Science.gov (United States)

    Pastina, B; Early, P J; Bergman, R L; Nettifee, J; Maller, A; Bray, K Y; Waldron, R J; Castel, A M; Munana, K R; Papich, M G; Messenger, K M

    2018-05-15

    The objective of this study was to describe the pharmacokinetics (PK) of cytarabine (CA) after subcutaneous (SC) administration to dogs with meningoencephalomyelitis of unknown etiology (MUE). Twelve dogs received a single SC dose of CA at 50 mg/m 2 as part of treatment of MUE. A sparse sampling technique was used to collect four blood samples from each dog from 0 to 360 min after administration. All dogs were concurrently receiving prednisone (0.5-2 mg kg -1 day -1 ). Plasma CA concentrations were measured by HPLC, and pharmacokinetic parameters were estimated using nonlinear mixed-effects modeling (NLME). Plasma drug concentrations ranged from 0.05 to 2.8 μg/ml. The population estimate (CV%) for elimination half-life and Tmax of cytarabine in dogs was 1.09 (21.93) hr and 0.55 (51.03) hr, respectively. The volume of distribution per fraction absorbed was 976.31 (10.85%) ml/kg. Mean plasma concentration of CA for all dogs was above 1.0 μg/ml at the 30-, 60-, 90-, and 120-min time points. In this study, the pharmacokinetics of CA in dogs with MUE after a single 50 mg/m 2 SC injection in dogs was similar to what has been previously reported in healthy beagles; there was moderate variability in the population estimates in this clinical population of dogs. © 2018 John Wiley & Sons Ltd.

  1. Chronotherapy with low-dose modified-release prednisone for the management of rheumatoid arthritis: a review

    Directory of Open Access Journals (Sweden)

    Beltrametti SP

    2016-11-01

    Full Text Available Stefano Paolo Beltrametti,1 Aurora Ianniello,2 Clara Ricci3 1Department of Rheumatology, S. Andrea Hospital, Vercelli, 2Rheumatology Outpatient Clinic, Novara, 3Primula Multimedia S.p.A, Pisa, Italy Abstract: To date, rheumatoid arthritis (RA remains a debilitating, life-threatening disease. One major concern is morning symptoms (MS, as they considerably impair the patients’ quality of life and ability to work. MS change in a circadian fashion, resembling the fluctuations of inflammatory cytokines such as interleukin-6, whose levels are higher in RA patients compared to healthy donors. Conversely, serum levels of the potent anti-inflammatory glucocorticoid cortisol are similar to that of healthy subjects, suggesting an imbalance that sustains a pro-inflammatory state. From a therapeutic point of view, administering synthetic glucocorticoids (GCs to RA patients represents an optimal strategy to provide for the inadequate levels of cortisol. Indeed, due to their high efficacy in RA, GCs remain a cornerstone more than 60 years after their first introduction, and despite the development of a wide range of targeted agents. However, to improve safety, low-dose GCs have been introduced, that have demonstrated high efficacy in reducing disease activity, radiological progression, and improving patients’ signs and symptoms especially in early RA when added to conventional disease-modifying antirheumatic drugs. A further improvement has been provided by the development of modified-release prednisone, which, by taking advantage of the circadian fluctuations of inflammatory cytokines, cortisol and MS, is given at bedtime to be released approximately 4 hours later. Several studies have already demonstrated the efficacy of this agent on disease activity, MS, and quality of life in the setting of established RA. Moreover, preliminary studies have shown that this new formulation not only has no impact on the adrenal function, but likely improves it. This

  2. Antianginal efficacy of the combination of felodipine-metoprolol 10/100 mg compared with each drug alone in patients with stable effort-induced angina pectoris

    DEFF Research Database (Denmark)

    Emanuelsson, H; Egstrup, K; Nikus, K

    1999-01-01

    OBJECTIVE: The primary objective of this randomized, double-blind, parallel group trial was to compare the antianginal and antiischemic efficacy of a combination tablet of felodipine-metoprolol 10/100 mg once daily with both drugs given separately once daily in patients with stable effort......-daily treatment with either felodipine-metoprolol 10/100 mg, felodipine 10 mg, or metoprolol 100 mg. The duration of active double-blind treatment was 4 weeks. There were 3 primary efficacy variables in the study; time until end of exercise, time until onset of chest discomfort, and time until 1-mm ST depression...... during a standardized exercise test. RESULTS: The number of patients randomized was 397. There was a statistically significant improvement in time until end of exercise with felodipine-metoprolol 10/100 mg compared with metoprolol 100 mg (P =.04) and felodipine 10 mg compared with metoprolol 100 mg ( P...

  3. Antitumour Activity and Safety of Enzalutamide in Patients with Metastatic Castration-resistant Prostate Cancer Previously Treated with Abiraterone Acetate Plus Prednisone for ≥24 weeks in Europe.

    Science.gov (United States)

    de Bono, Johann S; Chowdhury, Simon; Feyerabend, Susan; Elliott, Tony; Grande, Enrique; Melhem-Bertrandt, Amal; Baron, Benoit; Hirmand, Mohammad; Werbrouck, Patrick; Fizazi, Karim

    2018-07-01

    Enzalutamide and abiraterone acetate plus prednisone, which target the androgen receptor axis, have expanded the treatment of advanced prostate cancer. Retrospective analyses suggest some cross-resistance between these two drugs when used sequentially, but robust, prospective studies have not yet been reported. To fulfil a regulatory postregistration commitment by evaluating the efficacy and safety of enzalutamide in patients with metastatic castration-resistant prostate cancer (mCRPC) who progressed following abiraterone acetate plus prednisone treatment. Multicentre, single-arm, open-label study, enrolled patients with progressing mCRPC after ≥24 wk of abiraterone acetate plus prednisone treatment. All patients maintained castration therapy during the trial. Prior chemotherapy was allowed but not required. Patients received enzalutamide 160mg/d orally. The primary endpoint was radiographic progression-free survival. Secondary endpoints were overall survival, prostate-specific antigen (PSA) response, and time-to-PSA progression. Safety data were also assessed. Kaplan-Meier methods were used to descriptively analyse time-to-event endpoints. Overall, 214 patients received enzalutamide treatment, 145 of whom were chemotherapy-naïve. Median radiographic progression-free survival was 8.1 mo (95% confidence interval: 6.1-8.3); median overall survival had not been reached. Unconfirmed PSA response rate was 27% (48 of 181). Median time-to-PSA progression was 5.7 mo (95% confidence interval: 5.6-5.8). The most common treatment-emergent adverse events were fatigue (32%), decreased appetite (25%), asthenia (18%), back pain (17%), and arthralgia (16%). No seizures were reported. Enzalutamide showed antitumour activity in some patients with mCRPC who had previously progressed following ≥24 wk of abiraterone acetate plus prednisone treatment. Patients with mCRPC who progressed on previous abiraterone acetate plus prednisone treatment, with or without prior chemotherapy

  4. [Randomized double-blind comparative study of minaprine (200mg/j) and of placebo on memory loss].

    Science.gov (United States)

    Allain, H; Belliard, S; Lieury, A; Menard, G; Patat, A; Le Coz, F; Gandon, J M

    1996-01-01

    Thirty five subjects (age: 45-69 years) with subjective memory loss, without any other neuropsychiatric or somatic disease, were recruited in a phase II study. This double blind randomized versus placebo controlled study compared the effects of minaprine (200 mg/d) with placebo, in two parallel groups, during 2 months, on memory, attention and vigilance. Three psychometric tests were the main criteria of assessment: a standardized battery of memory tests (SM 5), the dual-coding test, the analysis of choice reaction times (CRT) and the critical flicker fusion point (CFF). A positive effect of minaprine was detected on words delayed recall (p = 0.028) and immediate recognition of words (p = 0.049). The global clinical tests (CGI, MacNair scale) were not statistically modified. Tolerability of minaprine and placebo were comparable. A positive pharmacodynamic activity on mnemonic performance is thus demonstrated in favour of minaprine (200 mg/d) in this specific population characterized by a memory complaint. These results would lead to a phase III study in which the main criteria would be global scales in order to confirm the clinical reliability of the present results.

  5. Budgetary impact on a U.S. health plan adopting abiraterone acetate plus prednisone for the treatment of patients with metastatic castration-resistant prostate cancer.

    Science.gov (United States)

    Sorensen, Sonja; Ellis, Lorie; Wu, Ying; Hutchins, Valerie; Linnehan, John E; Senbetta, Mekré

    2013-01-01

    Abiraterone acetate, an androgen biosynthesis inhibitor, received FDA approval in 2011 for metastatic castration-resistant prostate cancer (mCRPC) patients who have received prior chemotherapy containing docetaxel. To estimate the projected budgetary impact of adopting abiraterone for mCRPC patients from a U.S. health plan perspective. A decision analytic model compared mCRPC treatment cost before and after abiraterone acetate adoption based on a hypothetical 1,000,000-member plan. Plan mCRPC prevalence was derived from prostate cancer incidence reported in U.S. epidemiology statistics and disease progression data from published trials. Market shares for comparator mCRPC treatments (prednisone alone; cabazitaxel + prednisone; mitoxantrone + prednisone; docetaxel retreatment + prednisone) were derived from market research simulation. Abiraterone + prednisone uptake (8% - scenario 1 to 55% - scenario 3) was based on assumptions for illustrative purposes. Treatment costs were computed using prescribing information, treatment duration from phase III trials, and drug costs considering common U.S. cost listing and reimbursement schemes. Prevalence and costs of managing treatment-related toxicities were estimated from literature, treatment guidelines, and expert clinical opinion. The model evaluated the perspectives of a commercial payer with no Medicare beneficiaries and a commercial payer with a subset of Medicare beneficiaries. Sensitivity analyses were conducted to assess changing input values. In each modeled scenario, 57 patients with prior docetaxel therapy received treatment for mCRPC. For the commercial perspective, the incremental per-member-per-month (PMPM) cost attributable to abiraterone ranged from $0.0019 in scenario 1 to $0.0133 in scenario 3. For the commercial/Medicare perspective, the incremental PMPM ranged from $0.0026 in scenario 1 to $0.0176 in scenario 3. The average incremental PMPM cost over 3 scenarios is $0.0112. When testing key sensitivity

  6. Effects of prednisone and splenectomy in patients with idiopathic thrombocytopenic purpura : only splenectomy induces a complete remission

    NARCIS (Netherlands)

    Louwes, H; Vellenga, E; Houwerzijl, EJ; de Wolf, JTM

    2001-01-01

    Idiopathic thrombocytopenic purpura (ITP) is a heterogeneous disease, whereby it is unclear if and in which way prednisone and splenectomy affect the platelet kinetics leading to a complete remission. To determine the effects of prednisone and splenectomy on the mean platelet life (MPL) and platelet

  7. César Augusto Restrepo Valencia, Consuelo Vélez Álvarez Abstract Objective. To evaluate the effectiveness of calcineurin ciclosporin and tacrolimus inhibitors to induce remission in patients with refractory lupus nephritis. Patients, materials and methods. Patients with lupus nephritis class IV-G who despite receiving therapy with high doses of steroid and with a cytostatic (cyclophosphamide or mycophenolate for 3 months had not been able to induce some kind of remission.The exclusion criteria were creatinine levels greater than 3 mg / dl, pregnancy, previous history of exposure to calcineurin inhibitors, cancer, active infections, uncontrolled hypertension, and negligence with medication intake. The recommended dose of cyclosporine was 3 mg / kg / day and tacrolimus 0.1 mg / kg / day, in joint with prednisone 0.3 mg / kg / day, cyclophosphamide 1 mg / kg / day or mycophenolate mofetil 1 gram every 12 hours. The cyclophosphamide was administered only during 6 months, after which it was changed to azathioprine at doses of 1 mg / kg / day. Still, mycophenolate was continued at the same dose. All patients completed a minimum period of 12 months follow-up, it was considered that patients achieved partial remission when proteinuria decreased by 50% of the baseline value or its value decreased to less than 1 gram in 24 hours, decrease of leukocytes count and red blood cells in urine of 50%, and creatinine values were stable. A complete remission was considered when there was a reduction in proteinuria in a value less than 300 mg per 24 hours, urinary sediment with less than 3 red blood cells, less than 5 leukocyte for each high power microscopic field, and a creatinine value reduction by 50% or reaching a normal value. Results. Twelve patients met the inclusion criteria and initiated the calcineurin inhibitor protocol. Two presented accelerated deterioration in their function and required chronic dialysis therapy. Ten patients with active treatment completed 12 months

    Directory of Open Access Journals (Sweden)

    César Augusto Restrepo Valencia

    2014-10-01

    Full Text Available Objective: To evaluate the effectiveness of calcineurin ciclosporin and tacrolimus inhibitors to induce remission in patients with refractory lupus nephritis. Patients, materials and methods: Patients with lupus nephritis class IV-G who despite receiving the rapy with high doses of steroid and with a cytostatic (cyclophosphamide or mycophenolate for 3 months had not been able to induce some kind of remission.The exclusion criteria were creatinine levels greater than 3 mg / dl, pregnancy, previous history of exposure to calcineurin inhibitors, cancer, active infections, uncontrolled hypertension, and negligence with medication intake. The recommended dose of cyclosporine was 3 mg / kg / day and tacrolimus 0.1 mg / kg / day, in joint with prednisone 0.3 mg / kg / day, cyclophosphamide 1 mg / kg / day or mycophenolate mofetil 1 gram every 12 hours. The cyclophosphamide was administered only during 6 months, after which it was changed to azathioprine at doses of 1 mg / kg / day. Still, mycophenolate was continued at the same dose. All patients completed a minimum period of 12 months follow-up, it was considered that patients achieved partial remission when proteinuria decreased by 50% of the baseline value or its value decreased to less than 1 gram in 24 hours, decrease of leukocytes count and red blood cells in urine of 50%, and creatinine values were stable. A complete remission was considered when there was a reduction in proteinuria in a value less than 300 mg per 24 hours, urinary sediment with less than 3 red blood cells, less than 5 leukocyte for each high power microscopic field, and a creatinine value reduction by 50% or reaching a normal value. Results: Twelve patients met the inclusion criteria and initiated the calcineurin inhibitor protocol. Two presented accelerated deterioration in their function and required chronic dialysis therapy. Ten patients with active treatment completed 12 months of followup, of which 4 (40% had partial

  8. Microwave processed bulk and nano NiMg ferrites: A comparative study on X-band electromagnetic interference shielding properties

    Energy Technology Data Exchange (ETDEWEB)

    Chandra Babu Naidu, K., E-mail: chandrababu954@gmail.com [Ceramic Composite Laboratory, Centre for Crystal Growth, SAS, VIT University, Vellore 632014, Tamilnadu (India); Madhuri, W., E-mail: madhuriw12@gmail.com [Ceramic Composite Laboratory, Centre for Crystal Growth, SAS, VIT University, Vellore 632014, Tamilnadu (India); IFW, Leibniz Institute for Solid State and Materials Research, Technische Universität Dresden, 01069 Dresden (Germany)

    2017-02-01

    Bulk and nano Ni{sub 1-x}Mg{sub x}Fe{sub 2}O{sub 4} (x = 0–1) samples were synthesized via microwave double sintering and microwave assisted hydrothermal techniques respectively. The diffraction pattern confirmed the formation of cubic spinel phases in case of both the ferrites. The larger bulk densities were achieved to the bulk than that of nano. In addition, a comparative study on X-band (8.4–12 GHz) electromagnetic interference shielding properties of current bulk and nanomaterials was elucidated. The results showed that the bulk Ni{sub 0.6}Mg{sub 0.4}Fe{sub 2}O{sub 4} composition revealed the highest total shielding efficiency (SE{sub T}) of ∼17 dB. In comparison, the shielding efficiency values of all bulk contents were higher than that of nano because of larger bulk densities. Moreover, the ac-electromagnetic parameters such as electrical conductivity (σ{sub ac}), the respective real (ε′ & μ′) and imaginary parts (ε″ & μ″) of complex permittivity and permeability were investigated as a function of gigahertz frequency. The bulk ferrites of x = 0.4 & 0.6 showed the high ε″ of 10.26 & 6.71 and μ″ of 3.65 & 3.09 respectively at 12 GHz which can work as promising microwave absorber materials. Interestingly, nanoferrites exhibited negative μ″ values at few frequencies due to geometrical effects which improves the microwave absorption. - Highlights: • Bulk and nano NiMg ferrites are prepared by microwave and hydrothermal method. • X-band EMI shielding properties are studied for both bulk and nano ferrites. • Bulk Ni{sub 0.6}Mg{sub 0.4}Fe{sub 2}O{sub 4} revealed the highest SE{sub T} of ∼17 dB at 8.4 GHz. • Bulk x = 0.4 & 0.6 showed the high ε″ and μ″ at 12 GHz for absorber applications.

  9. Complete remission of coronary vasculitis in Churg-Strauss Syndrome by prednisone and cyclophosphamide.

    Science.gov (United States)

    Riksen, Niels P; Gehlmann, Helmut; Brouwer, Annemarie E; van Deuren, Marcel

    2013-03-01

    The heart is involved in up to 50% of all patients with Churg-Strauss syndrome, but vasculitis of the coronary arteries has only been rarely documented. We present a young patient with severe coronary aneurysms and stenotic lesions due to a Churg-Strauss vasculitis. Prompt therapy with prednisone and cyclophosphamide resulted in the complete resolution of all lesions.

  10. Complete remission of coronary vasculitis in Churg-Strauss Syndrome by prednisone and cyclophosphamide

    NARCIS (Netherlands)

    Riksen, N.P.; Gehlmann, H.R.; Brouwer, A.E.; Deuren, M. van

    2013-01-01

    The heart is involved in up to 50% of all patients with Churg-Strauss syndrome, but vasculitis of the coronary arteries has only been rarely documented. We present a young patient with severe coronary aneurysms and stenotic lesions due to a Churg-Strauss vasculitis. Prompt therapy with prednisone

  11. Randomized, double-blind, crossover study comparing DFN-11 injection (3 mg subcutaneous sumatriptan) with 6 mg subcutaneous sumatriptan for the treatment of rapidly-escalating attacks of episodic migraine.

    Science.gov (United States)

    Cady, Roger K; Munjal, Sagar; Cady, Ryan J; Manley, Heather R; Brand-Schieber, Elimor

    2017-12-01

    A 6-mg dose of SC sumatriptan is the most efficacious and fast-acting acute treatment for migraine, but a 3-mg dose of SC sumatriptan may improve tolerability while maintaining efficacy. This randomized, double-blind, crossover study compared the efficacy and tolerability of 3 mg subcutaneous (SC) sumatriptan (DFN-11) with 6 mg SC sumatriptan in 20 adults with rapidly-escalating migraine attacks. Eligible subjects were randomized (1:1) to treat 1 attack with DFN-11 and matching placebo autoinjector consecutively or 2 DFN-11 autoinjectors consecutively and a second attack similarly but with the alternative dose (3 mg or 6 mg). The proportions of subjects who were pain-free at 60 min postdose, the primary endpoint, were similar following treatment with 3 mg SC sumatriptan and 6 mg SC sumatriptan (50% vs 52.6%, P  =  .87). The proportions of subjects experiencing pain relief (P  ≥  .48); reductions in migraine pain intensity (P  ≥  .78); and relief from nausea, photophobia, or phonophobia (P  ≥  .88) with 3 mg SC sumatriptan and 6 mg SC sumatriptan were similar, as were the mean scores for satisfaction with treatment (M  =  2.6 vs M  =  2.4, P  =  .81) and the mean number of rescue medications used (M  =  .11 vs M  =  .26, P  =  .32). The most common adverse events with the 3- and 6-mg doses were triptan sensations - paresthesia, neck pain, flushing, and involuntary muscle contractions of the neck - and the incidence of adverse events with both doses was similar (32 events total: 3 mg, n  =  14 [44%]; 6 mg, n  =  18 [56%], P  =  .60). Triptan sensations affected 4 subjects with the 6-mg dose only, 1 subject with the 3-mg dose only, and 7 subjects with both sumatriptan doses. Chest pain affected 2 subjects (10%) treated with the 6-mg dose and no subjects (0%) treated with the 3-mg dose of DFN-11. There were no serious adverse events. The 3-mg SC dose

  12. Comparative Effectiveness of Vancomycin Versus Daptomycin for MRSA Bacteremia With Vancomycin MIC >1 mg/L: A Multicenter Evaluation.

    Science.gov (United States)

    Moise, Pamela A; Culshaw, Darren L; Wong-Beringer, Annie; Bensman, Joyce; Lamp, Kenneth C; Smith, Winter J; Bauer, Karri; Goff, Debra A; Adamson, Robert; Leuthner, Kimberly; Virata, Michael D; McKinnell, James A; Chaudhry, Saira B; Eskandarian, Romic; Lodise, Thomas; Reyes, Katherine; Zervos, Marcus J

    2016-01-01

    Clinical studies comparing vancomycin with alternative therapy for methicillin-resistant Staphylococcus aureus (MRSA) bacteremia are limited. The objective of this study was to compare outcomes of early daptomycin versus vancomycin treatment for MRSA bacteremia with high vancomycin MICs in a geographically diverse multicenter evaluation. This nationwide, retrospective, multicenter (N = 11), matched, cohort study compared outcomes of early daptomycin with vancomycin for MRSA bloodstream infection (BSI) with vancomycin MICs 1.5 to 2 µg/mL. Matching variables, based on propensity regression analysis, included age, intensive care unit (ICU), and type of BSI. Outcomes were as follows: (1) composite failure (60-day all-cause mortality, 7-day clinical or microbiologic failure, 30-day BSI relapse, or end-of-treatment failure (EOT; discontinue/change daptomycin or vancomycin because of treatment failure or adverse event]); (2) nephrotoxicity; and (2) day 4 BSI clearance. A total of 170 patients were included. The median (interquartile range) age was 60 years (50-74); the median (range) Acute Physiology and Chronic Health Evaluation II score was 15 (10-18); 31% were in an ICU; and 92% had an infectious disease consultation. BSI types included endocarditis/endovascular (39%), extravascular (55%), and central catheter (6%). The median daptomycin dose was 6 mg/kg, and the vancomycin trough level was 17 mg/L. Overall composite failure was 35% (59 of 170): 15% due to 60-day all-cause mortality, 14% for lack of clinical or microbiologic response by 7 days, and 17% due to failure at end of therapy (discontinue/change because of treatment failure or adverse event). Predictors of composite failure according to multivariate analysis were age >60 years (odds ratio, 3.7; P day 4 bacteremia clearance rates for immunocompromised patients (n = 26) (94% vs 56% for daptomycin vs vancomycin; P = 0.035). Results from this multicenter study provide, for the first time, a geographically diverse

  13. Pitavastatin 4 mg Provides Significantly Greater Reduction in Remnant Lipoprotein Cholesterol Compared With Pravastatin 40 mg: Results from the Short-term Phase IV PREVAIL US Trial in Patients With Primary Hyperlipidemia or Mixed Dyslipidemia.

    Science.gov (United States)

    Miller, P Elliott; Martin, Seth S; Joshi, Parag H; Jones, Steven R; Massaro, Joseph M; D'Agostino, Ralph B; Sponseller, Craig A; Toth, Peter P

    2016-03-01

    Remnants are partially hydrolyzed, triglyceride-rich lipoproteins that are implicated in atherosclerosis. We assessed the adequacy of pitavastatin 4 mg and pravastatin 40 mg in reducing atherogenic lipid parameters beyond LDL-C, in particular remnant lipoprotein cholesterol (RLP-C). From the Phase IV, multicenter, randomized, double-blind PREVAIL US (A Study of Pitavastatin 4 mg Vs. Pravastatin 40 mg in Patients With Primary Hyperlipidemia or Mixed Dyslipidemia) trial, we examined lipoprotein cholesterol subfractions using Vertical Auto Profile testing and apolipoproteins B and A-I at baseline and 12 weeks. Participants with primary hyperlipidemia or mixed dyslipidemia had LDL-C levels of 130 to 220 mg/dL and triglyceride levels ≤ 400 mg/dL. In this post hoc analysis, changes in lipid parameters were compared by using ANCOVA. Lipoprotein subfraction data were available in 312 patients (pitavastatin, n = 157; pravastatin, n = 155). Pitavastatin promoted a greater reduction in RLP-C than pravastatin (-13.6 [8.7] vs -9.3 [9.5] mg/dL). Furthermore, the pitavastatin group reported greater reductions in both components of RLP-C (both, P < 0.001): intermediate-density lipoprotein cholesterol (-9.5 [6.3] vs -6.4 [6.6] mg/dL) and very low-density lipoprotein cholesterol subfraction 3 (-4.1 [3.5] vs -2.9 [3.8] mg/dL). There were also greater reductions in the major ratios of risk (apolipoprotein B/apolipoprotein A-I and total cholesterol/HDL-C) (both, P < 0.001). There were no significant changes in HDL-C, its subfractions, or natural log lipoprotein(a)-cholesterol. The mean age was 58.8 ± 8.9 years in the pitavastatin group and 57.0 ± 10.2 years in the pravastatin group. Compared with pravastatin 40 mg daily, pitavastatin 4 mg provided superior reductions in atherogenic lipid parameters beyond LDL-C, including RLP-C. Future studies are needed investigate the clinical implications of lowering directly measured RLP-C as the principal target. ClinicalTrials.gov identifier

  14. A comparative study of metabolism and concentration factors of Fe, Cu, Zn, Mn, Co and Mg in Carcinus maenas and Cancer irroratus ovaries during ovogenesis

    International Nuclear Information System (INIS)

    Martin, J.-L.M.

    1975-01-01

    Fe, Cu, Zn, Mn, Co, and Mg were analysed in the ovary of Carcinus maenas and Cancer irroratus during ovogenesis. In both ovaries, the relatives rates, expressed as parts per millions as a ratio of wet and dry weight, are the following: Mg>Zn>Fe>Cu>Mn>Co, while in the hemolymph of Cancer irroratus these relative rates are the following: Mg>Cu>Zn>Fe>Mn>Co. Compared to concentrations of these metals in sea water, Mg expected, all metals in the ovary of Cancer irroratus have a concentration factor upper than 1. Compared to the concentration of metals in the hemolymph is, for Fe, Mn, and Co, the concentration factor upper than 1, and for Cu, Zn and Mg, the concentration factor lower than 1. A study of correlations was done between the concentrations of metals considered in pairs, and between the concentrations of metals and the parameters: water content and gonad index [fr

  15. A randomised, phase II study of repeated rhenium-188-HEDP combined with docetaxel and prednisone versus docetaxel and prednisone alone in castration-resistant prostate cancer (CRPC) metastatic to bone; the Taxium II trial

    Energy Technology Data Exchange (ETDEWEB)

    Dodewaard-de Jong, Joyce M. van [VU University Medical Centre, Department of Medical Oncology, Amsterdam (Netherlands); Meander Medical Centre, Department of Medical Oncology, Amersfoort (Netherlands); Klerk, John M.H. de [Meander Medical Centre, Department of Nuclear Medicine, Amersfoort (Netherlands); Bloemendal, Haiko J. [Meander Medical Centre, Department of Medical Oncology, Amersfoort (Netherlands); University Medical Centre Utrecht, Department of Medical Oncology, Utrecht (Netherlands); Oprea-Lager, Daniela E.; Hoekstra, Otto S. [VU University Medical Centre, Department of Radiology and Nuclear Medicine, Amsterdam (Netherlands); Berg, H.P. van den [Tergooi Medical Hospital, Department of Medical Oncology, Hilversum (Netherlands); Los, Maartje [St Antonius Hospital Utrecht, Department of Medical Oncology, Utrecht (Netherlands); Beeker, Aart [Spaarne Gasthuis, Department of Medical Oncology, Hoofddorp (Netherlands); Jonker, Marianne A. [VU University Medical Centre, Department of Epidemiology and Biostatistics, Amsterdam (Netherlands); O' Sullivan, Joe M. [Queen' s University Belfast, Centre for Cancer Research and Cell Biology, Belfast, Northern Ireland (United Kingdom); Verheul, Henk M.W.; Eertwegh, Alfons J.M. van den [VU University Medical Centre, Department of Medical Oncology, Amsterdam (Netherlands)

    2017-08-15

    Rhenium-188-HEDP is a beta-emitting radiopharmaceutical used for palliation of metastatic bone pain. We investigated whether the addition of rhenium-188-HEDP to docetaxel/prednisone improved efficacy of chemotherapy in patients with CRPC. Patients with progressive CRPC and osteoblastic bone metastases were randomised for first-line docetaxel 75 mg/m{sup 2} 3-weekly plus prednisone with or without 2 injections of rhenium-188-HEDP after the third (40 MBq/kg) and after the sixth (20 MBq/kg) cycle of docetaxel. Primary endpoint was progression-free survival (PFS), defined as either PSA, radiographic or clinical progression. Patients were stratified by extent of bone metastases and hospital. Forty-two patients were randomised for standard treatment and 46 patients for combination therapy. Median number of cycles of docetaxel was 9 in the control group and 8 in the experimental group. Median follow-up was 18.4 months. Two patients from the experimental group did not start treatment after randomisation. In the intention to treat analysis no differences in PFS, survival and PSA became apparent between the two groups. In an exploratory per-protocol analysis median overall survival was significantly longer in the experimental group (33.8 months (95%CI 31.75-35.85)) than in the control group (21.0 months (95%CI 13.61-28.39); p 0.012). Also median PFS in patients with a baseline phosphatase >220U/L was significantly better with combination treatment (9.0 months (95%CI 3.92-14.08) versus 6.2 months (95%CI 3.08-9.32); log rank p 0.005). As expected, thrombocytopenia (grade I/II) was reported more frequently in the experimental group (25% versus 0%). Combined treatment with rhenium-188-HEDP and docetaxel did not prolong PFS in patients with CRPC. The observed survival benefit in the per-protocol analysis warrants further studies in the combined treatment of chemotherapy and radiopharmaceuticals. (orig.)

  16. Acute Pancreatitis and Diabetic Ketoacidosis following L-Asparaginase/Prednisone Therapy in Acute Lymphoblastic Leukemia

    Directory of Open Access Journals (Sweden)

    Dania Lizet Quintanilla-Flores

    2014-01-01

    Full Text Available Acute pancreatitis and diabetic ketoacidosis are unusual adverse events following chemotherapy based on L-asparaginase and prednisone as support treatment for acute lymphoblastic leukemia. We present the case of a 16-year-old Hispanic male patient, in remission induction therapy for acute lymphoblastic leukemia on treatment with mitoxantrone, vincristine, prednisone, and L-asparaginase. He was hospitalized complaining of abdominal pain, nausea, and vomiting. Hyperglycemia, acidosis, ketonuria, low bicarbonate levels, hyperamylasemia, and hyperlipasemia were documented, and the diagnosis of diabetic ketoacidosis was made. Because of uncertainty of the additional diagnosis of acute pancreatitis as the cause of abdominal pain, a contrast-enhanced computed tomography was performed resulting in a Balthazar C pancreatitis classification.

  17. Differential Scanning Calorimetry and Thermodynamic Predictions—A Comparative Study of Al-Zn-Mg-Cu Alloys

    Directory of Open Access Journals (Sweden)

    Gernot K.-H. Kolb

    2016-08-01

    Full Text Available Al-Zn-Mg-Cu alloys are widely used in aircraft applications because of their superior mechanical properties and strength/weight ratios. Commercial Al-Zn-Mg-Cu alloys have been intensively studied over the last few decades. However, well-considered thermodynamic calculations, via the CALPHAD approach, on a variation of alloying elements can guide the fine-tuning of known alloy systems and the development of optimized heat treatments. In this study, a comparison was made of the solidus temperatures of different Al-Zn-Mg-Cu alloys determined from thermodynamic predictions and differential scanning calorimetry (DSC measurements. A variation of the main alloying elements Zn, Mg, and Cu generated 38 experimentally produced alloys. An experimental determination of the solidus temperature via DSC was carried out according to a user-defined method, because the broad melting interval present in Al-Zn-Mg-Cu alloys does not allow the use of the classical onset method for pure substances. The software algorithms implemented in FactSage®, Pandat™, and MatCalc with corresponding commercially available databases were deployed for thermodynamic predictions. Based on these investigations, the predictive power of the commercially available CALPHAD databases and software packages was critically reviewed.

  18. Effects of methotrexate combined with hydroxychloroquine sulfate and prednisone acetate on inflammatory response, immune function and liver and renal function in patients with systemic lupus erythematosus

    Directory of Open Access Journals (Sweden)

    Jiang-Li Xia

    2017-11-01

    Full Text Available Objective: To investigate the effects of methotrexate and hydroxychloroquine sulfate and prednisone on inflammatory response, immune function, liver and renal function in patients with systemic lupus erythematosus (SLE. Methods: A total of 80 cases of SLE patients according to the random data table were divided into the control group (n=40 and observation group (n=40, the control group were treated with hydroxychloroquine sulfate and prednisone treatment, on the basis of treatment of the control group, patients in the observation group in the control group were treated with methotrexate, the levels of inflammatory factors, immune function, liver and kidney function indexes in the two groups between the before treatment and after treatment were compared. Results: Comparison of the levels before treatment, the difference of the CRP, WBC, ESR, IgA, IgG, complement C3, complement C4, ALT, AST, SCr and BUN levels were not statistically significant. After treatment, the levels of CRP, ESR, IgA, IgG, ALT, AST, SCr and BUN in the observation group were significantly lower than those in the control group, and the difference was statistically significant. The levels of WBC and complement C4 in the observation group [(5.18±1.08伊10 9 /L, (0.22±0.05 g/L] were significantly higher than those in the control group [(4.51±0.52伊10 9 /L, (0.18±0.03 g/L], and there was no significant difference in the level of complement C3 between the two groups after treatment. Conclusion: Methotrexate combined with hydroxychloroquine sulfate and prednisone for the treatment of SLE can effectively reduce inflammation, improve immune function, has little effect on kidney function, high safety, which has an important clinical value.

  19. A Comparative Study of Chemically and Biologically Synthesized MgO Nanomaterial for Liquefied Petroleum Gas Detection

    Science.gov (United States)

    Thirupathi, Rampelly; Solleti, Goutham; Sreekanth, Tirumala; Sadasivuni, Kishor Kumar; Venkateswara Rao, Kalagadda

    2018-03-01

    The exceptional chemical and physical properties of nanostructured materials are extremely suitable for designing new and enhanced sensing devices, particularly gas sensors and biosensors. The present work describes the synthesis of magnesium oxide (MgO) nanoparticles through two methods: a green synthesis using aloe vera plant extract and a chemical method using a glycine-based solution combustion route. In a single step, the extracted organic molecules from aloe vera plants were used to reduce metal ions by the green method. MgO nanoparticles were coated onto the interdigital electrode using the drop-drying method. The dynamic gas-sensing characteristics were measured for liquefied petroleum gas (LPG) at different concentrations and various temperatures. The MgO nanoparticles were characterized by using x-ray diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy to determine the size and structure of the particles. The product's functional properties were analyzed by Fourier transform-infrared spectroscopy and UV-visible spectroscopy. We found that the LPG sensing behavior of biologically synthesized MgO registers excellent sensitivity at various operating temperatures.

  20. Improvements in health-related quality of life with liraglutide 3.0 mg compared with placebo in weight management.

    Science.gov (United States)

    Kolotkin, R L; Fujioka, K; Wolden, M L; Brett, J H; Bjorner, J B

    2016-08-01

    Obesity has a negative impact on health-related quality of life (HRQoL). The SCALE Obesity and Prediabetes study investigated the effect of liraglutide 3.0 mg, as adjunct to diet and exercise, on HRQoL in patients with obesity [body mass index (BMI) ≥ 30 kg m(-2) ] or overweight (BMI ≥ 27 kg m(-2) ) with comorbidity. Participants were advised on a 500 kcal d(-1) deficit diet and a 150-min week(-1) exercise programme and were randomised 2:1 to once-daily subcutaneous liraglutide 3.0 mg or placebo. HRQoL was assessed using the Impact of Weight on Quality of Life-Lite (IWQOL-Lite) and Short-Form 36 (SF-36) v2 health questionnaires. Individuals on liraglutide 3.0 mg (n = 2046) had significantly greater improvements in IWQOL-Lite total score (10.6 ± 13.3) vs. placebo (n = 1020) (7.7 ± 12.8) and SF-36 physical (PCS) and mental (MCS) component summary scores (PCS, 3.6 ± 6.8; MCS, 0.2 ± 8.1) vs. placebo (PCS, 2.2 ± 7.7; MCS, -0.9 ± 9.1). The estimated treatment differences were IWQOL-Lite total score 3.1 (95% CI: 2.2; 4.0), P 3.0 mg vs. placebo. More patients on liraglutide 3.0 mg experienced meaningful improvement on the IWQOL-Lite total (P < 0.0001) and the SF-36 PCS (P < 0.0001) scores. © 2016 The Authors. Clinical Obesity published by John Wiley & Sons Ltd on behalf of International Association for the Study of Obesity (IASO).

  1. Equivalence of a single dose (1200 mg) compared to a three-time a day dose (400 mg) of chondroitin 4&6 sulfate in patients with knee osteoarthritis. Results of a randomized double blind placebo controlled study.

    Science.gov (United States)

    Zegels, B; Crozes, P; Uebelhart, D; Bruyère, O; Reginster, J Y

    2013-01-01

    Evaluation of the efficacy and safety of a single oral dose of a 1200 mg sachet of chondroitin 4&6 sulfate (CS 1200) vs three daily capsules of chondroitin 4&6 sulfate 400 mg (CS 3*400) (equivalence study) and vs placebo (superiority study) during 3 months, in patients with knee osteoarthritis (OA). Comparative, double-blind, randomized, multicenter study, including 353 patients of both genders over 45 years with knee OA. Minimum inclusion criteria were a Lequesne index (LI) ≥ 7 and pain ≥ 40 mm on a visual analogue scale (VAS). LI and VAS were assessed at baseline and after 1-3 months. Equivalence between CS was tested using the per-protocol procedure and superiority of CS vs placebo was tested using an intent-to-treat procedure. After 3 months of follow-up, no significant difference was demonstrated between the oral daily single dose of CS 1200 formulation and the three daily capsules of CS 400. Patients treated with CS 1200 or CS 3*400 were significantly improved compared to placebo after 3 months of follow-up in terms of LI (security and tolerability was observed between the three groups. This study suggests that a daily administration of an oral sachet of 1200 mg of chondroitin 4&6 sulfate allows a significant clinical improvement compared to a placebo, and a similar improvement when compared to a regimen of three daily capsules of 400 mg of the same active ingredient. Copyright © 2012 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

  2. Comparative Study of Ni-Zn LHS and Mg-Al LDH Adsorbents of Navy Blue and Yellow F3G Dye

    Directory of Open Access Journals (Sweden)

    Idha Yulia Ikhsani

    2016-03-01

    Full Text Available Adsorption of disperse dyes from wastewater onto Ni-Zn LHS (layered hydroxide salts and Mg-Al LDH (layered double hydroxides has been compared in this study. Effects of initial pH solution, contact time and initial dye concentration were investigated. The ability of the adsorbent to be reused was also studied. The results showed that acidic condition was favorable for the adsorption of each dyes onto both adsorbent. The adsorption kinetics was studied using pseudo-first-order, pseudo-second-order and Santosa’s kinetics models. The experimental data fits well with the pseudo-second order kinetic model. The equilibrium adsorption data were analyzed using Langmuir and Freundlich isotherm models. The results showed that adsorption of navy blue onto both adsorbent followed Freundlich isotherm adsorption, while yellow F3G followed Langmuir isotherm adsorption. In the application for the adsorption the wastewater containing dyes, Ni-Zn LHS has a better adsorption capacity of 52.33 mg/g than that of Mg-Al LDH that 30.54 mg/g. Calcination of the adsorbent which has already been used increased the adsorption capacity of Mg-Al LDH to 84.75 mg/g, but decreased the adsorption capacity of the Ni-Zn LHS to 42.65 mg/g.

  3. An Evaluation of Theraphy with Fluconazole 150 mg Tablets Compared to Fluconazole 150 mg Tablets Plus Dermoxen Lenitiva Cream in The Time to Reduce Simptomatology in Women with Vulvovaginal Candidiasis

    Directory of Open Access Journals (Sweden)

    Davide Carati

    2014-06-01

    Full Text Available Aim of the study. Authors investigated first of all the time to onset of first relief of symptoms. Secondary measures included the time to overall relief of symptoms and the reoccurrence rate over the first 45 days after the first visit. Methods. A randomized, open-label, parallel study evaluated 47 women with moderate to severe symptoms of Vulvo Vaginal Candidiasis (VVC. Patients were divided into two groups of treatment: group 1 followed a therapy with Fluconazole 150 mg tablets, while group 2 had a therapy based on Fluconazole 150 mg tablets coadjuvated by Dermoxen Lenitiva cream. Results. The time at which 50% of patients experienced first relief of symptoms was 24.6 hours for Group 1, while for Group 2 it was 12.4 hours (P<0.05. There were significant differences between the two groups in respect to the time of first relief of symptoms and reoccurrence of infection within 45 days of treatment. Conclusions. Combined treatment with Fluconazole 150 mg tablets and by Dermoxen Lenitiva cream provides statistically significant improvement in the time of first relief of symptoms, complete relief of symptoms and relapse time in the treatment of VVC compared to fluconazole 150 mg tablets only.

  4. Comparative investigation of tungsten inert gas and friction stir welding characteristics of Al-Mg-Sc alloy plates

    International Nuclear Information System (INIS)

    Zhao, Juan; Jiang, Feng; Jian, Haigen; Wen, Kang; Jiang, Long; Chen, Xiaobo

    2010-01-01

    Al-Mg-Sc alloy plates were welded by FSW and TIG welding. The effect of welding processes on mechanical properties of Al-Mg-Sc welded joints was analyzed based on optical microscopy, transmission electron microscopy, tensile testing and Vickers microhardness measurements. The results show that the mechanical properties of FSW welded joint are much better than those of TIG welded joint; the strength coefficient of FSW joint is up to 94%. Moreover, tensile strength and yield strength of FSW joint are 19% and 31% higher than those of TIG joint, respectively, which are attributed to the preservation of cold working microstructures in the process of FSW. Due to the low welding temperature during FSW process and the excellent thermal stability of Al 3 (Sc, Zr) particles, the cold working microstructures can be well preserved. In addition, the FSW joint have asymmetric microstructures and mechanical properties, which are not observed in TIG welded joint.

  5. A comparative corrosion behavior of Mg, AZ31 and AZ91 alloys in 3.5% NaCl solution

    Directory of Open Access Journals (Sweden)

    I.B. Singh

    2015-06-01

    Full Text Available The corrosion behavior of Mg, AZ31 and AZ91 has been evaluated in 3.5% NaCl solution using weight loss, electrochemical polarization and impedance measurements. Corrosion rate derived from the weight losses demonstrated the occurrence of steeply fast corrosion reaction on AZ91 alloy after three hours of immersion, indicating the start of galvanic corrosion. An increase of corrosion rate with immersion time was also observed for AZ31 but with lesser extent than AZ91 alloy. Whereas Mg metals showed a decrease of corrosion rate with immersion time, suggesting the formation of a protective layer on their surfaces. In contrast, the corrosion current density (Icorr derived from the Tafel plots, exhibited their corrosion resistances in order of Mg > AZ91 > AZ31. Electrochemical charge transfer resistance (Rct and double layer capacitance measured by electrochemical impedance spectroscopy (EIS, are well in accordance with the measured Icorr. EIS measurements with time and microstructural examination of the corroded and uncorroded samples are helpful in elucidation of results measured by electrochemical polarization.

  6. Improvements in health-related quality of life with liraglutide 3.0 mg compared with placebo in weight management

    DEFF Research Database (Denmark)

    Kolotkin, R. L.; Fujioka, K.; Wolden, M. L.

    2016-01-01

    Obesity has a negative impact on health-related quality of life (HRQoL). The SCALE Obesity and Prediabetes study investigated the effect of liraglutide 3.0 mg, as adjunct to diet and exercise, on HRQoL in patients with obesity [body mass index (BMI) ≥ 30 kg m−2] or overweight (BMI ≥ 27 kg m−2......) with comorbidity. Participants were advised on a 500 kcal d−1 deficit diet and a 150-min week−1 exercise programme and were randomised 2:1 to once-daily subcutaneous liraglutide 3.0 mg or placebo. HRQoL was assessed using the Impact of Weight on Quality of Life-Lite (IWQOL-Lite) and Short-Form 36 (SF-36) v2 health...... questionnaires. Individuals on liraglutide 3.0 mg (n = 2046) had significantly greater improvements in IWQOL-Lite total score (10.6 ± 13.3) vs. placebo (n = 1020) (7.7 ± 12.8) and SF-36 physical (PCS) and mental (MCS) component summary scores (PCS, 3.6 ± 6.8; MCS, 0.2 ± 8.1) vs. placebo (PCS, 2.2 ± 7.7; MCS, −0...

  7. Outcomes with two different schedules of bortezomib, melphalan, and prednisone (VMP) for previously untreated multiple myeloma: matched pair analysis using long-term follow-up data from the phase 3 VISTA and PETHEMA/GEM05 trials.

    Science.gov (United States)

    Mateos, Maria-Victoria; Oriol, Albert; Martínez-López, Joaquín; Teruel, Ana-Isabel; Bengoechea, Enrique; Palomera, Luis; de Arriba, Felipe; Esseltine, Dixie-Lee; Cakana, Andrew; Pei, Lixia; van de Velde, Helgi; Miguel, Jesus San

    2016-12-01

    Bortezomib-melphalan-prednisone (VMP) is a standard-of-care for previously untreated, transplant-ineligible multiple myeloma (MM). Here, we compared outcomes between VMP regimens in the VISTA trial (9-cycle VMP schedule, including 4 cycles of twice weekly bortezomib) and the PETHEMA/GEM05 trial (less intensive 6-cycle VMP schedule with 1 cycle of twice weekly and 5 cycles of weekly bortezomib, then bortezomib-based maintenance). A total of 113 patient pairs matched by propensity score (estimated using logistic regression and incorporating eight exposure/outcome-related parameters) were included in this retrospective analysis. Median cumulative bortezomib dose was higher in PETHEMA/GEM05 than VISTA (49.6 vs 37.0 mg/m 2 ); median dose intensity was lower (2.0 vs 5.1 mg/m 2 /month). Median progression-free survival (PFS) and time-to-progression (TTP) were significantly longer in PETHEMA/GEM05 than VISTA (PFS, 30.5 vs 20.0 months, p = 0.0265; TTP, 33.8 vs 24.2 months, p = 0.0049) after a median follow-up of 77.2 and 26.0 months, respectively. Median overall survival (OS) was similar (61.3 vs 61.0 months, p = 0.6528; median follow-up, 77.6 vs 60.1 months). Post-induction complete response rate was lower in PETHEMA/GEM05 than VISTA (19 vs 31 %; p = 0.03318); on-study (including maintenance) rate was similar (30 vs 31 %; p = 0.89437). This analysis suggests that the less-intensive PETHEMA/GEM05 VMP regimen plus maintenance may improve PFS and TTP, but not OS, compared with the VISTA VMP regimen. NCT00111319, NCT00443235.

  8. A phase II trial of abiraterone acetate plus prednisone in patients with triple-negative androgen receptor positive locally advanced or metastatic breast cancer (UCBG 12-1).

    Science.gov (United States)

    Bonnefoi, H; Grellety, T; Tredan, O; Saghatchian, M; Dalenc, F; Mailliez, A; L'Haridon, T; Cottu, P; Abadie-Lacourtoisie, S; You, B; Mousseau, M; Dauba, J; Del Piano, F; Desmoulins, I; Coussy, F; Madranges, N; Grenier, J; Bidard, F C; Proudhon, C; MacGrogan, G; Orsini, C; Pulido, M; Gonçalves, A

    2016-05-01

    Several expression array studies identified molecular apocrine breast cancer (BC) as a subtype that expresses androgen receptor (AR) but not estrogen receptor α. We carried out a multicentre single-arm phase II trial in women with AR-positive, estrogen, progesterone receptor and HER2-negative (triple-negative) metastatic or inoperable locally advanced BC to assess the efficacy and safety of abiraterone acetate (AA) plus prednisone. Patients with a metastatic or locally advanced, centrally reviewed, triple-negative and AR-positive (≥10% by immunohistochemistry, IHC) BC were eligible. Any number of previous lines of chemotherapy was allowed. AA (1000 mg) was administered once a day with prednisone (5 mg) twice a day until disease progression or intolerance. The primary end point was clinical benefit rate (CBR) at 6 months defined as the proportion of patients presenting a complete response (CR), partial response (PR) or stable disease (SD) ≥6 months. Secondary end points were objective response rate (ORR), progression-free survival (PFS) and safety. One hundred and forty-six patients from 27 centres consented for IHC central review. Of the 138 patients with sufficient tissue available, 53 (37.6%) were AR-positive and triple-negative, and 34 of them were included from July 2013 to December 2014. Thirty patients were eligible and evaluable for the primary end point. The 6-month CBR was 20.0% [95% confidence interval (CI) 7.7%-38.6%], including 1 CR and 5 SD ≥6 months, 5 of them still being under treatment at the time of analysis (6.4+, 9.2+, 14.5+, 17.6+, 23.4+ months). The ORR was 6.7% (95% CI 0.8%-22.1%). The median PFS was 2.8 months (95% CI 1.7%-5.4%). Fatigue, hypertension, hypokalaemia and nausea were the most common drug-related adverse events; the majority of them being grade 1 or 2. AA plus prednisone treatment is beneficial for some patients with molecular apocrine tumours and five patients are still on treatment. NCT01842321. © The Author 2016

  9. Prednisolone and prednisone neo-formation in bovine urine after sampling.

    Science.gov (United States)

    Arioli, F; Casati, A; Fidani, M; Silvestri, M; Pompa, G

    2012-06-01

    The rise in the frequency of detecting prednisolone in bovine urine from northern Italy has come into focus of attention in recent years. The possibility that neo-formation of prednisolone or that prednisone may occur in urine after collection of samples was therefore investigated. Cow urine collected for official routine controls in Lombardy containing more than 80 ng/ml cortisol, and prednisolone and prednisone below the decision limit (CCα) of the method (0.4 and 0.5 ng/ml, respectively) was used. The C1-2 dehydrogenation of naturally present cortisol and cortisone was checked by incubating urine, both contaminated and uncontaminated with faeces, at 37°C and by collecting samples at 0, 1, 2, 4, 6 and 24 h. The influence of Helix pomatia juice was also investigated in order to determine whether deconjugation could influence the reliability of the results. All samples were analysed by HPLC-MS3 for the presence of cortisol, cortisone, prednisolone and prednisone in negative electrospray ionisation mode, utilising the consecutive reaction monitoring of product ions derived from the formate molecular adduct ([M+HCOO]-). The observed neo-formation of prednisolone shows that inappropriate temperatures in sample storage and processing can result in an incorrect accusation of non-compliance. The faecal contamination of urine, performed with the aim to mimic a collection conducted without the necessary care, moreover, evoked a high increase in prednisolone concentration in two out of seven animals. Moreover, H. pomatia juice had no significant effect on the prednisolone concentration, indicating that this corticosteroid is present in its free form in cow urine.

  10. Comparative and complementary characterization of precipitate microstructures in Al-Mg-Si(-Li) alloys by transmission electron microscopy, energy dispersive X-ray spectroscopy and atom probe tomography

    Energy Technology Data Exchange (ETDEWEB)

    Koshino, Yuki [Department of Mechanical Engineering and Materials Science, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501 (Japan); Kozuka, Masaya [Materials Research Laboratory, Kobe Steel, Ltd., 1-5-5 Takatsukadai, Nishi-ku, Kobe 651-2271 (Japan); Hirosawa, Shoichi, E-mail: hirosawa@ynu.ac.jp [Department of Mechanical Engineering and Materials Science, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501 (Japan); Aruga, Yasuhiro [Materials Research Laboratory, Kobe Steel, Ltd., 1-5-5 Takatsukadai, Nishi-ku, Kobe 651-2271 (Japan)

    2015-02-15

    Highlights: • Microalloying addition of Li enhances the age-hardening response of Al-Mg-Si alloys. • Size and number density of nanoclusters or precipitates are increased by Li addition. • Mg and Si contents within the aggregates are inversely decreased by Li addition. • Microalloying Li accelerates heterogeneous nucleation of such Mg-Si aggregates. - Abstract: In this study, comparative and complementary characterization of precipitate microstructures by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and atom probe tomography (APT) has been performed for Al-0.55 wt%Mg-0.89 wt%Si(-0.043 wt%Li) alloys aged at 433 K for 1.2 ks (under aging) and 36 ks (peak aging). Quantitative estimation of nanometer-scale clusters (nanoclusters) and β″ precipitates by TEM and APT revealed that microalloying addition of Li increases the size and number density of these Mg-Si aggregates, resulting in the enhanced age-hardening response. Positive evidence by APT for the segregation of Li suggests that heterogeneous nucleation of such Mg-Si aggregates with the aid of Li is attributed to the modified precipitate microstructures and thus improved mechanical strength of this alloy system.

  11. Deuterium absorption in Mg{sub 70}Al{sub 30} thin films with bilayer catalysts: A comparative neutron reflectometry study

    Energy Technology Data Exchange (ETDEWEB)

    Poirier, Eric [National Research Council Canada/Canadian Neutron Beam Centre, Bldg. 459, Chalk River Laboratories, Chalk River, ON, K0J 1J0 (Canada); Harrower, Chris T.; Kalisvaart, Peter [Chemical and Materials Engineering, University of Alberta and National Research Council Canada/National Institute for Nanotechnology, Edmonton, AB, T6G 2M9 (Canada); Bird, Adam [National Research Council Canada/Canadian Neutron Beam Centre, Bldg. 459, Chalk River Laboratories, Chalk River, ON, K0J 1J0 (Canada); Teichert, Anke [Helmholtz Zentrum Berlin, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Instituut voor Kern-en Stralingsfysica and INPAC, K.U. Leuven, Celestijnenlaan 200D, B-3001 Leuven (Belgium); Laboratorium voor Vaste-Stoffysica en Magnetisme and INPAC, K.U. Leuven, Celestijnenlaan 200D, B-3001 Leuven (Belgium); Wallacher, Dirk; Grimm, Nico; Steitz, Roland [Helmholtz Zentrum Berlin, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Mitlin, David [Chemical and Materials Engineering, University of Alberta and National Research Council Canada/National Institute for Nanotechnology, Edmonton, AB, T6G 2M9 (Canada); Fritzsche, Helmut, E-mail: Helmut.Fritzsche@nrc-cnrc.gc.ca [National Research Council Canada/Canadian Neutron Beam Centre, Bldg. 459, Chalk River Laboratories, Chalk River, ON, K0J 1J0 (Canada)

    2011-05-05

    Highlights: > Mg{sub 70}Al{sub 30} thin films studied for hydrogen absorption using in situ neutron reflectometry. > Films with Ta/Pd, Ti/Pd and Ni/Pd bilayer catalysts systematically compared. > Measurements reveals deuterium spillover from the catalysts to the MgAl phase. > The use of Ti-Pd bilayer offers best results in terms of amount absorbed and kinetics. > Key results cross-checked with X-ray reflectometry. - Abstract: We present a neutron reflectometry study of deuterium absorption in thin films of Al-containing Mg alloys capped with a Ta/Pd, Ni/Pd and Ti/Pd-catalyst bilayer. The measurements were performed at room temperature over the 0-1 bar pressure range under quasi-equilibrium conditions. The modeling of the measurements provided a nanoscale representation of the deuterium profile in the layers at different stages of the absorption process. The absorption mechanism observed was found to involve spillover of atomic deuterium from the catalyst layer to the Mg alloy phase, followed by the deuteration of the Mg alloy. Complete deuteration of the Mg alloy occurs in a pressure range between 100 and 500 mbar, dependent on the type of bilayer catalyst. The use of a Ti/Pd bilayer catalyst yielded the best results in terms of both storage density and kinetic properties.

  12. THE COMPARATIVE ANALYSIS OF THE ACTIVITY ASSAY METHODS FOR MG2+-DEPENDENT NA+/K+-ACTIVATED ATPASE IN ERYTHROCYTE MEMBRANES

    Directory of Open Access Journals (Sweden)

    Polina Anatolevna Petrova

    2017-12-01

    Full Text Available This review considers the methodological reasons for the wide range of results for the red blood cells Mg2+-dependent Na+/K+-ATPase activity described by different authors. We assert that the differences in the Na+/K+-ATPase activity obtained by the researchers are due to the methodological peculiarities associated with methods of obtaining and measurement of the enzyme activity, such as red blood cells separation and storage (centrifugation, concentration and composition of the lysing solution, time and temperature of hemolysis and freezing, as well as the peculiarities of methods for the quantitative determination of protein and inorganic phosphorus. On the basis of the literature data analysis we recommend that for the most accurate determination of the Na+/K+-ATPase activity it is better to use the chelator in the lysing buffer solution and Fiske-Subbarow and Lowry methods for the determination of inorganic phosphorus and quantitative protein content, respectively.

  13. Influence of defects on the adhesion of transition metals on non-polar MgO(001) surface: comparative theoretical analysis

    International Nuclear Information System (INIS)

    Zhukovskii, Yu.F.; Kotomin, E.A.

    2004-01-01

    Full text: First principles simulations were performed for noble (Ag) and transition (Cu) atoms adsorbed on regular and defective MgO(001) substrate [1]. Both metal atoms and surface O vacancies (F s centers) were distributed uniformly with one Ag (Cu) atom or F 2 defect per 2x2 surface supercell. Surface O 2- ions are the energetically more preferable for metal atom adsorption on a regular substrate as compared to Mg 2+ ions. The nature of the interaction between Ag or Cu adatoms and a defectless MgO substrate is physisorption (despite the difference in the adsorption energies: 0.62 eV vs. 0.39 eV per Cu and Ag adatom, respectively). Above the F s centers, metal atoms are bounded much stronger as compared with the regular O 2- sites (2.4 eV vs. 2.1 eV per Cu and Ag adatoms, respectively). This is accompanied by a substantial charge transfer towards each adatom (Δq Cu = 0.41 e and Δq Ag = 0.32 e) as well as a formation of partly covalent Me-F s bonds across the interface (Mulliken bond populations p Cu-F s = 0.25 e and p Ag-F s = 0.33 e). Thus, adsorption of transition metal atom on the defective MgO(001) substrate clearly indicates a strong electrostatic bonding because of the considerable interfacial charge redistribution. [1] Yu.F. Zhukovskii, E.A. Kotomin, and G. Borstel, Adsorption of single Ag and Cu atoms on regular and defective MgO(001) substrates: an ab initio study - Vacuum, 73 (2004) in press

  14. Differentiation and cytokine synthesis of human alveolar osteoblasts compared to osteoblast-like cells (MG63) in response to titanium surfaces.

    Science.gov (United States)

    Rausch-fan, Xiaohui; Qu, Zhe; Wieland, Marco; Matejka, Michael; Schedle, Andreas

    2008-01-01

    The aim of this study was to investigate the influence of different implant surface topographies and chemistries on the expression of differentiation/proliferation markers on MG63 cells and primary human alveolar osteoblasts. Hydrophobic acid-etched (A) and hydrophobic coarse-grit-blasted, acid-etched (SLA) surfaces and hydrophilic acid-etched (modA) and hydrophilic coarse-grit-blasted (modSLA) surfaces were produced. Thereby, modA and modSLA surfaces were rinsed under nitrogen protection and stored in a sealed glass tube containing isotonic NaCl solution at pH 4-6. Tissue culture plates without specimens served as controls. The behavior of MG63 cells and primary human alveolar osteoblasts (AOB) grown on all surfaces was compared through determination of alkaline phosphatase (ALP) activity, cell proliferation ((3)H-thymidin incorporation, MTT colorimetric assay) and expression of osteocalcin (OC), osteoprotegerin (OPG), transforming growth factor-beta1 (TGF-beta(1)) and vascular endothelial growth factor (VEGF), detected with commercial available test kits. Proliferation of MG63 and primary cells was highest on controls, followed by A surfaces, modA and SLA surfaces being almost on the same level and lowest on modSLA surfaces. modSLA surfaces exhibited highest ALP and OC production, followed by SLA, modA and A surfaces. Proliferation and OC production were comparable for MG63 cells and AOB. OPG, TGF-beta(1) and VEGF produced on primary cells showed a slightly different rank order on different surfaces compared to MG63 cells. modSLA still showed the highest production of OPG, TGF-beta(1) and VEGF, but was followed by modA, SLA and A. Statistical significance was checked by ANOVA (pmodA surfaces showed enhanced expression of OPG, TGF-beta(1) and VEGF on MG63 cells compared to primary human alveolar osteoblasts. Overall, the lowest proliferation rates and the highest expressions of differentiation markers and growth factor productions were observed on modSLA.

  15. Micro-alloying Mg with Y, Ce, Gd and La for texture modification-A comparative study

    International Nuclear Information System (INIS)

    Stanford, N.

    2010-01-01

    A comparative study of the effectiveness of Y, La, Ce and Gd as texture modifiers during the extrusion of magnesium-based alloys has been carried out. It was found that La, Ce and Gd are all effective texture modifiers, being able to produce the 'rare earth' texture at the low alloying levels of 300, 400 and 600 ppm respectively. Y was not as effective as the other three elements in modifying the texture, and at no concentration studied did this element form a typical 'rare earth' texture. It is proposed that a strong interaction of solutes with dislocations and grain boundaries is responsible for the significant impact rare earth additions have on the extruded grain size and texture at very low alloying levels.

  16. Sonographic Features of Cervical Lymph Nodes in Patients With Hashimoto Thyroiditis and the Impacts From the Levothyroxine With Prednisone Therapy.

    Science.gov (United States)

    Lyu, Guo-Rong; Zheng, Wei-Kun; Lin, Wan-Ling; Zheng, Li-Ping; Guo, Hai-Xin; Li, Li-Ya

    2017-11-06

    This study aimed to evaluate the ultrasonographic pattern of cervical lymph nodes (CLNs) and whether levothyroxine with prednisone therapy is effective for lymphadenopathy in patients with Hashimoto thyroiditis (HT). This retrospective study was looking at patients with confirmed diagnosis of HT who underwent comprehensive neck ultrasound examination. We reviewed sonographic findings in 127 patients with HT, 234 euthyroid patients with goiter, and 122 healthy subjects. In addition, 30 untreated HT patients with cervical lymphadenopathy were recruited for the levothyroxine with prednisone therapy. We rescanned the patients 9 months after treatment with levothyroxine and prednisone. Patients with HT had a higher rate of CLN detection on ultrasound than euthyroid patients with goiter and healthy subjects at cervical levels III, IV, and VI (P thyroid volume, thyroid nodule volume, CLN volume, symptom score, and cosmetic grade of 30 HT patients were remarkably decreased (P Hashimoto thyroiditis seems to be associated with an increased rate of detection of CLNs with abnormal sonographic features, particularly at cervical levels III, IV, and VI. Therapy with levothyroxine with prednisone is effective for cervical lymphadenopathy in patients with HT.

  17. (Gynazole-1® Compared to Fluconazole 150 mg Tablets (Diflucan® in the Time to Relief of Symptoms in Patients With Vulvovaginal Candidiasis

    Directory of Open Access Journals (Sweden)

    Larry S. Seidman

    2005-01-01

    Full Text Available Background. It is estimated that as many as 13 million cases of vulvovaginal infection occur in the United States annually, the majority of which are the result of Candida albicans infection. The symptoms of vulvovaginal infections are often painful and distressing to the patient. The objective of this study was to compare the time to symptomatic relief of vulvovaginal candidiasis (VVC with butoconazole nitrate 2% Site Release® vaginal cream (Gynazole-1® and oral fluconazole 150 mg tablets (Diflucan®.

  18. Levels of α7 integrin and laminin-α2 are increased following prednisone treatment in the mdx mouse and GRMD dog models of Duchenne muscular dystrophy

    Directory of Open Access Journals (Sweden)

    Ryan D. Wuebbles

    2013-09-01

    Duchenne muscular dystrophy (DMD is a fatal neuromuscular disease for which there is no cure and limited treatment options. Prednisone is currently the first line treatment option for DMD and studies have demonstrated that it improves muscle strength. Although prednisone has been used for the treatment of DMD for decades, the mechanism of action of this drug remains unclear. Recent studies have shown that the α7β1 integrin is a major modifier of disease progression in mouse models of DMD and is therefore a target for drug-based therapies. In this study we examined whether prednisone increased α7β1 integrin levels in mdx mouse and GRMD dog models and myogenic cells from humans with DMD. Our results show that prednisone promotes an increase in α7 integrin protein in cultured myogenic cells and in the muscle of mdx and GRMD animal models of DMD. The prednisone-mediated increase in α7 integrin was associated with increased laminin-α2 in prednisone-treated dystrophin-deficient muscle. Together, our results suggest that prednisone acts in part through increased merosin in the muscle basal lamina and through sarcolemmal stabilization of α7β1 integrin in dystrophin-deficient muscle. These results indicate that therapies that target an increase in muscle α7β1 integrin, its signaling pathways and/or laminin could be therapeutic in DMD.

  19. Randomized controlled trial of toremifene 120 mg compared with exemestane 25 mg after prior treatment with a non-steroidal aromatase inhibitor in postmenopausal women with hormone receptor-positive metastatic breast cancer.

    Science.gov (United States)

    Yamamoto, Yutaka; Ishikawa, Takashi; Hozumi, Yasuo; Ikeda, Masahiko; Iwata, Hiroji; Yamashita, Hiroko; Toyama, Tatsuya; Chishima, Takashi; Saji, Shigehira; Yamamoto-Ibusuki, Mutsuko; Iwase, Hirotaka

    2013-05-16

    After the failure of a non-steroidal aromatase inhibitor (nsAI) for postmenopausal patients with metastatic breast cancer (mBC), it is unclear which of various kinds of endocrine therapy is the most appropriate. A randomized controlled trial was performed to compare the efficacy and safety of daily toremifene 120 mg (TOR120), a selective estrogen receptor modulator, and exemestane 25 mg (EXE), a steroidal aromatase inhibitor. The primary end point was the clinical benefit rate (CBR). The secondary end points were objective response rate (ORR), progression-free survival (PFS), overall survival (OS) and toxicity. Initially, a total of 91 women was registered in the study and randomly assigned to either TOR120 (n = 46) or EXE (n = 45) from October 2008 to November 2011. Three of the 46 patients in the TOR120 arm were not received treatment, 2 patients having withdrawn from the trial by their preference and one having been dropped due to administration of another SERM. When analyzed after a median observation period of 16.9 months, the intention-to-treat analysis showed that there were no statistical difference between TOR120 (N = 46) and EXE (n = 45) in terms of CBR (41.3% vs. 26.7%; P = 0.14), ORR (10.8% vs. 2.2%; P = 0.083), and OS (Hazard ratio, 0.60; P = 0.22). The PFS of TOR120 was longer than that of EXE, the difference being statistically significant (Hazard ratio, 0.61, P = 0.045). The results in treatment-received cohort (N = 88) were similar to those in ITT cohort. Both treatments were well-tolerated with no severe adverse events, although the treatment of 3 of 43 women administered TOR120 was stopped after a few days because of nausea, general fatigue, hot flush and night sweating. TOR120, as a subsequent endocrine therapy for mBC patients who failed non-steroidal AI treatment, could potentially be more beneficial than EXE. UMIN000001841.

  20. Randomized controlled trial of toremifene 120 mg compared with exemestane 25 mg after prior treatment with a non-steroidal aromatase inhibitor in postmenopausal women with hormone receptor-positive metastatic breast cancer

    International Nuclear Information System (INIS)

    Yamamoto, Yutaka; Yamamoto-Ibusuki, Mutsuko; Iwase, Hirotaka; Ishikawa, Takashi; Hozumi, Yasuo; Ikeda, Masahiko; Iwata, Hiroji; Yamashita, Hiroko; Toyama, Tatsuya; Chishima, Takashi; Saji, Shigehira

    2013-01-01

    After the failure of a non-steroidal aromatase inhibitor (nsAI) for postmenopausal patients with metastatic breast cancer (mBC), it is unclear which of various kinds of endocrine therapy is the most appropriate. A randomized controlled trial was performed to compare the efficacy and safety of daily toremifene 120 mg (TOR120), a selective estrogen receptor modulator, and exemestane 25 mg (EXE), a steroidal aromatase inhibitor. The primary end point was the clinical benefit rate (CBR). The secondary end points were objective response rate (ORR), progression-free survival (PFS), overall survival (OS) and toxicity. Initially, a total of 91 women was registered in the study and randomly assigned to either TOR120 (n = 46) or EXE (n = 45) from October 2008 to November 2011. Three of the 46 patients in the TOR120 arm were not received treatment, 2 patients having withdrawn from the trial by their preference and one having been dropped due to administration of another SERM. When analyzed after a median observation period of 16.9 months, the intention-to-treat analysis showed that there were no statistical difference between TOR120 (N = 46) and EXE (n = 45) in terms of CBR (41.3% vs. 26.7%; P = 0.14), ORR (10.8% vs. 2.2%; P = 0.083), and OS (Hazard ratio, 0.60; P = 0.22). The PFS of TOR120 was longer than that of EXE, the difference being statistically significant (Hazard ratio, 0.61, P = 0.045). The results in treatment-received cohort (N = 88) were similar to those in ITT cohort. Both treatments were well-tolerated with no severe adverse events, although the treatment of 3 of 43 women administered TOR120 was stopped after a few days because of nausea, general fatigue, hot flush and night sweating. TOR120, as a subsequent endocrine therapy for mBC patients who failed non-steroidal AI treatment, could potentially be more beneficial than EXE. https://upload.umin.ac.jp/cgi-open-bin/ctr/ctr.cgi?function

  1. Estudo comparativo das argilas das olarias dos municípios de Alfenas e Areado, MG Comparative study of the clays used in potteries from Alfenas and Areado, MG, Brazil

    Directory of Open Access Journals (Sweden)

    L. A. Gaspar Junior

    2012-09-01

    Full Text Available Os horizontes pedológicos dos perfis de solos desenvolvidos a partir das rochas pré-cambrianas dos municípios de Alfenas, MG e Areado, MG assim como os sedimentos colúvio-aluvionares associados têm sido intensivamente utilizados para fins cerâmicos (em particular em olarias de tijolos sem um estudo detalhado para racionalizar sua utilização na indústria cerâmica. Entretanto apesar da proximidade destes dois municípios, segundo antigos trabalhadores das olarias dessas regiões, as argilas do município de Areado têm apresentado qualidade superior às das argilas do município de Alfenas. Tal fato levou ao desenvolvimento do presente trabalho cujo objetivo foi comparar as propriedades mineralógicas (descrição macroscópica e difração de raios X, químicas (elementos maiores por fluorescência por raios X e análise de carbono orgânico e tecnológicas (distribuição granulométrica de prensagem; granulometria a laser, módulo de ruptura à flexão; absorção de água, porosidade aparente; retração linear de queima; cor de queima, entre outros das argilas destes dois municípios para se conhecer a matéria-prima dessas duas regiões de modo a desenvolver aplicações tecnológicas adequadas. A melhor qualidade da matéria prima originada do município de Areado (Grupo AR é devida à maior presença de argilominerais como a caulinita, illita e esmectita associados a uma granulometria mais fina, que contribuiu para uma melhor sinterização.The pedological horizons of soil profiles developed from pre-cambrian rocks of the municipalities of Alfenas and Areado, MG, Brazil, as well as the alluvial-colluvial sediments associated has been used intensively for ceramic potteries (particularly for bricks but without a detailed study to rationalize their use in the ceramic industry. However, despite the proximity of these cities, according to skilled workers of the brickworks, the raw materials from Areado have shown higher quality than

  2. Reinduction therapy for adult acute leukemia with adriamycin, vincristine, and prednisone: a Southwest Oncology Group study.

    Science.gov (United States)

    Elias, L; Shaw, M T; Raab, S O

    1979-08-01

    In an attempt to improve remissions and survivals in previously treated patients with adult acute leukemia, we gave Adriamycin, vincristine, and prednisone for induction therapy, followed by 6-mercaptopurine and methotrexate for maintenance therapy to patients attaining complete remission (CR). The study group consisted of 18 patients with acute myeloblastic leukemia (AML), ten with acute lymphoblastic leukemia, and one with acute undifferentiated leukemia. Only one patient had previously received Adriamycin. Overall, there were ten CRs and two partial remissions. The five CRs and one partial remission in patients with AML occurred among those with one prior induction attempt; none of the eight AML patients with more than one prior induction attempt responded. The actuarial median duration of CR was 15 weeks and was similar for AML and acute lymphoblastic leukemia patients. Responders had a longer median survival (30 weeks) than nonresponders (9 weeks). Thus, although a reasonable number of responses in previously treated patients were obtained with this program, improvements in maintenance therapy are clearly needed.

  3. Amplification of cox2 (approximately 620 bp) from 2 mg of up to 129 years old herbarium specimens, comparing 19 extraction methods and 15 polymerases.

    Science.gov (United States)

    Telle, Sabine; Thines, Marco

    2008-01-01

    During the past years an increasing number of studies have focussed on the use of herbarium specimens for molecular phylogenetic investigations and several comparative studies have been published. However, in the studies reported so far usually rather large amounts of material (typically around 100 mg) were sampled for DNA extraction. This equals an amount roughly equivalent to 8 cm(2) of a medium thick leaf. For investigating the phylogeny of plant pathogens, such large amounts of tissue are usually not available or would irretrievably damage the specimens. Through systematic comparison of 19 DNA extraction protocols applied to only 2 mg of infected leaf tissue and testing 15 different DNA polymerases, we could successfully amplify a mitochondrial DNA region (cox2; approximately 620 bp) from herbarium specimens well over a hundred years old. We conclude that DNA extraction and the choice of DNA polymerase are crucial factors for successful PCR amplification from small samples of historic herbarium specimens. Through a combination of suitable DNA extraction protocols and DNA polymerases, only a fraction of the preserved plant material commonly used is necessary for successful PCR amplification. This facilitates the potential use of a far larger number of preserved specimens for molecular phylogenetic investigation and provides access to a wealth of genetic information in preserved in specimens deposited in herbaria around the world without reducing their scientific or historical value.

  4. Hyperbaric bupivacaine 2.5 mg prolongs analgesia compared with plain bupivacaine when added to intrathecal fentanyl 25 microg in advanced labor.

    Science.gov (United States)

    Teoh, Wendy H L; Sia, Alex T H

    2003-09-01

    We investigated the effect of sequential administration of intrathecal (IT) hyperbaric bupivacaine (after the initial administration of IT hypobaric fentanyl) on the duration of spinal analgesia. Thirty-seven nulliparous parturients with a cervical dilation >/= 5 cm were randomized to receive either IT fentanyl 25 micro g and plain bupivacaine 2.5 mg (group P; n = 19) or IT fentanyl 25 micro g and hyperbaric (with 8% glucose) bupivacaine 2.5 mg (group H; n = 18). The two components of the IT injectate were administered sequentially (fentanyl 25 micro g diluted in 2 mL of normal saline, immediately followed by 0.5 mL of 0.5% bupivacaine). Patients were then positioned with their torso elevated at 30 degrees for 30 min. Pain scores using 0-100 visual analog scales were collected before combined spinal/epidural analgesia and at 5, 15, and 30 min after the block. Patients in Group H had a longer median duration of analgesia (122 min; range, 80-210 min) than Group P (95 min; range, 75-125 min) (P hyperbaric bupivacaine conferred an increased duration of IT analgesia compared with plain bupivacaine.

  5. Comparative study of main dosimetric characteristics between the GR-200A and MCP-N LiF (Mg, Cu, P) TLD chips

    International Nuclear Information System (INIS)

    Shen Wenxiu; Tang Kaiyong; Wang Shoushan; Cai Gangang; Zhu Hongying; Lu Min

    1999-01-01

    GR-200A and MCP-N are the same kind of LiF(Mg, Cu, P) chip detectors. The main dosimetric characteristics of two LiF (Mg, Cu, P) chip TLDs (GR-200A made in Solid Dosimetric Detector and Method Laboratory, Beijing, and MCP-N made in Poland) are compared, including glow curve structure, TL sensitivity, anti-moisture, reproducibility, background, detection threshold and photosensitivity. Sensitivity of GR-200a is 1.6 times as much as that of MCP-N. The sensitivity of GR-200A is stable after being used for six times, but the sensitivity of MCP-N dropped 2.8%, and its colour turned from white into light brown. The sensitivity and colour of GR-200A did not vary after being stored for 25 days at 98% RH, by comparison the sensitivity of MCP-N dropped 14%, and its colour turned into light brown. It was found that the GR-200A TLD is superior to the MCP-N TLD in above-mentioned characteristics

  6. Microarray based comparative genome-wide expression profiling of ...

    African Journals Online (AJOL)

    pg

    2014-03-05

    Mar 5, 2014 ... 45/F. ALL. 18/M. Fever, anaemia, enlarge lymph glands in children. Child having >50-60% blast cells in. TLC, TLC >20,000/cm mm. Vincristine (1.5 mg/m2), doxorubicin (25 mg/m2), prednisone. (40 mg/m2),. L-asparaginase (10,000 units iv/ alternate day), methotrexate. (12 mg/m2intrathecal). ALL. 6/M. ALL.

  7. An innovative, simple, fast, and less toxic high-performance liquid chromatographic method for determination of prednisone in capsules

    Directory of Open Access Journals (Sweden)

    Pedro Henrique Reis da Silva

    2017-06-01

    Full Text Available ABSTRACT Prednisone is an anti-inflammatory steroid drug widely used in clinical practice. However, no high-performance liquid chromatographic (HPLC method has been described in the literature for the determination of prednisone in capsules until now. Thus, an HPLC method was developed using a C18 (250x4.0, 5 µm column, with methanol:water (70:30 as mobile phase at a flow rate of 1 mL/min and detection at 240 nm. The developed method was validated following current Brazilian legislation. Additionally, linearity was assessed by evaluating the assumptions of normality, homoscedasticity, and independency of residuals, and the fit to the linear model. The method showed linearity (r2>0.99 over the range of 14.0-26.0 µg/mL, selectivity, precision (RSD<2.0%, robustness, and accuracy (average recovery of 100.05%. The chromatographic procedure was applied for assay and uniformity content determination of three different batches of prednisone capsules, showing to be suitable for their quality control.

  8. Wear of MgO-CaO-SiO2-P2O5-F-Based Glass Ceramics Compared to Selected Dental Ceramics

    Directory of Open Access Journals (Sweden)

    Jongee Park

    2007-01-01

    Full Text Available Wear of a glass-ceramic produced through controlled crystallization of a glass in the MgO-CaO-SiO2-P2O5-F system has been evaluated and compared to various commercial dental ceramics including IPS Empress 2, Cergo Pressable Ceramic, Cerco Ceram, and Super porcelain EX-3. Wear tests were performed in accord with the ASTM G99 for wear testing with a pin-on-disk apparatus. The friction coefficient and specific wear rate of the materials investigated were determined at a load of 10 N and at ambient laboratory conditions. Microhardness of the materials was also measured to elucidate the appropriateness of these materials for dental applications.

  9. Aktivitas Ramuan Daun Salam, Herba Pegagan, Akar Alang-Alang dan Biji Pala pada Tikus Hipertensi yang Diinduksi Prednison dan Garam

    Directory of Open Access Journals (Sweden)

    Ulfatun Nisa

    2017-08-01

    Full Text Available The prevalence of hypertension in Indonesia was 25,8%. As much as 70% types of hypertensive patients were mild hypertension. There were some medicinal plants contain single formulation could be used for lowering blood pressure but not in a herbal formulation. This study determined the efficacy of antihypertension herbal formulation that consists of Indonesian bay leaves, Centella herbs, blady grass roots dan nutmeg seeds. This study was an experimental laboratory research with pre and post-test controlled design, used thirty Sprague-Dawley rats that were classified randomly into five groups (negative control group which didn't have treatment, positive control group which consumed captopril 0,25 mg, and three groups which consumed antihypertension herbal formulation with doses of 0,08 g; 0,16 g; and 0,32 g. The rats were induced by prednisone and NaCl 2,5 % for 21 days.  The data were analysed using ANOVA test with CI 95%. After two weeks observation, the results showed that the blood pressure in the negative control group increased,  but in the positive control and treatment groups decreased significantly (p=0,001. In conclusion, the herbal formulation could decrease rat's blood pressure.  

  10. Randomized, Placebo-Controlled, Phase III Trial of Sunitinib Plus Prednisone Versus Prednisone Alone in Progressive, Metastatic, Castration-Resistant Prostate Cancer

    DEFF Research Database (Denmark)

    Michaelson, M Dror; Oudard, Stephane; Ou, Yen-Chuan

    2014-01-01

    PURPOSE: We evaluated angiogenesis-targeted sunitinib therapy in a randomized, double-blind trial of metastatic castration-resistant prostate cancer (mCRPC). PATIENTS AND METHODS: Men with progressive mCRPC after docetaxel-based chemotherapy were randomly assigned 2:1 to receive sunitinib 37.5 mg...

  11. Safety and pharmacokinetics of single and multiple intravenous bolus doses of diclofenac sodium compared with oral diclofenac potassium 50 mg: A randomized, parallel-group, single-center study in healthy subjects.

    Science.gov (United States)

    Munjal, Sagar; Gautam, Anirudh; Okumu, Franklin; McDowell, James; Allenby, Kent

    2016-01-01

    In a randomized, parallel-group, single-center study in 42 healthy adults, the safety and pharmacokinetic parameters of an intravenous formulation of 18.75 and 37.5 mg diclofenac sodium (DFP-08) following single- and multiple-dose bolus administration were compared with diclofenac potassium 50 mg oral tablets. Mean AUC0-inf values for a 50-mg oral tablet and an 18.75-mg intravenous formulation were similar (1308.9 [393.0]) vs 1232.4 [147.6]). As measured by the AUC, DFP-08 18.75 mg and 37.5 mg demonstrated dose proportionality for extent of exposure. One subject in each of the placebo and DFP-08 18.75-mg groups and 2 subjects in the DFP-08 37.5-mg group reported adverse events that were considered by the investigator to be related to the study drug. All were mild in intensity and did not require treatment. Two subjects in the placebo group and 1 subject in the DFP-08 18.75-mg group reported grade 1 thrombophlebitis; no subjects reported higher than grade 1 thrombophlebitis after receiving a single intravenous dose. The 18.75- and 37.5-mg doses of intravenous diclofenac (single and multiple) were well tolerated for 7 days. Additional efficacy and safety studies are required to fully characterize the product. © 2015, The American College of Clinical Pharmacology.

  12. Better sexual acceptability of agomelatine (25 and 50 mg) compared to escitalopram (20 mg) in healthy volunteers. A 9-week, placebo-controlled study using the PRSexDQ scale.

    Science.gov (United States)

    Montejo, Angel L; Deakin, J F W; Gaillard, Raphael; Harmer, Catherine; Meyniel, Florent; Jabourian, Artin; Gabriel, Cecilia; Gruget, Celine; Klinge, Corinna; MacFayden, Christine; Milligan, Holly; Mullings, Emma; Goodwin, Guy

    2015-10-01

    The present double-blind, placebo-controlled study evaluates the effects of agomelatine and the selective serotonin reuptake inhibitor escitalopram on sexual dysfunction in healthy men and women. A total of 133 healthy volunteers (67 men, 66 women) were randomly assigned to agomelatine (25 or 50 mg) or escitalopram (20 mg) or placebo for nine weeks. Sexual acceptability was evaluated by using the psychotropic-related sexual dysfunction questionnaire 5-items total score and sexual dysfunction relative to each sub-score (in 110 volunteers with sexual activity). Sexual dysfunction was evaluated at baseline and after two, five and eight weeks of treatment and one week after drug discontinuation. The psychotropic-related sexual dysfunction questionnaire 5-items total score was significantly lower in both agomelatine groups versus escitalopram at all visits (p escitalopram group than in the placebo group at each post-baseline visit (p escitalopram significantly impaired dysfunction relative to "delayed orgasm or ejaculation" (p escitalopram group than in agomelatine groups (p escitalopram. Evaluation of the effect of agomelatine and escitalopram on emotions and motivation in healthy male and female volunteers. ISRCTN75872983. © The Author(s) 2015.

  13. Apixaban 5 and 2.5 mg twice-daily versus warfarin for stroke prevention in nonvalvular atrial fibrillation patients: Comparative effectiveness and safety evaluated using a propensity-score-matched approach.

    Science.gov (United States)

    Li, Xiaoyan; Keshishian, Allison; Hamilton, Melissa; Horblyuk, Ruslan; Gupta, Kiran; Luo, Xuemei; Mardekian, Jack; Friend, Keith; Nadkarni, Anagha; Pan, Xianying; Lip, Gregory Y H; Deitelzweig, Steve

    2018-01-01

    Prior real-world studies have shown that apixaban is associated with a reduced risk of stroke/systemic embolism (stroke/SE) and major bleeding versus warfarin. However, few studies evaluated the effectiveness and safety of apixaban according to its dosage, and most studies contained limited numbers of patients prescribed 2.5 mg twice-daily (BID) apixaban. Using pooled data from 4 American claims database sources, baseline characteristics and outcomes for patients prescribed 5 mg BID and 2.5 mg BID apixaban versus warfarin were compared. After 1:1 propensity-score matching, 31,827 5 mg BID apixaban-matched warfarin patients and 6600 2.5 mg BID apixaban-matched warfarin patients were identified. Patients prescribed 2.5 mg BID apixaban were older, had clinically more severe comorbidities, and were more likely to have a history of stroke and bleeding compared with 5 mg BID apixaban patients. Compared with warfarin, 5 mg BID apixaban was associated with a lower risk of stroke/SE (hazard ratio [HR]: 0.70, 95% confidence interval [CI]: 0.60-0.81) and major bleeding (HR: 0.59, 95% CI: 0.53-0.66). Compared with warfarin, 2.5 mg BID apixaban was also associated with a lower risk of stroke/SE (HR: 0.63, 95% CI: 0.49-0.81) and major bleeding (HR: 0.59, 95% CI: 0.49-0.71). In this real-world study, both apixaban doses were assessed in 2 patient groups differing in age and clinical characteristics. Each apixaban dose was associated with a lower risk of stroke/SE and major bleeding compared with warfarin in the distinct population for which it is being prescribed in United States clinical practice. Clinicaltrials.Gov Identifier: NCT03087487.

  14. Phase I/II study on docetaxel, gemcitabine and prednisone in castrate refractory metastatic prostate cancer

    DEFF Research Database (Denmark)

    Buch-Hansen, Trine Zeeberg; Bentzen, Lise Nørgaard; Hansen, Steinbjoern

    2010-01-01

    DGP, maximum of eight courses, until progression or unacceptable toxicity. Docetaxel 75 mg/m(2) was administered intravenously day 1, gemcitabine was given day 1 and 8 in doses increasing from 600 to 1,000 mg/m(2) every third week. Patients had castrate refractory metastatic prostate cancer (CRMPC......), adequate function of liver, kidney and bone marrow; ECOG performance status...

  15. Análise comparativa de nutrientes funcionais em morangos de diferentes cultivares da região de Lavras-MG Comparative analysis of functional nutrients in strawberries of different cultivars in the region of Lavras-MG

    Directory of Open Access Journals (Sweden)

    Denise Alvarenga Rocha

    2008-12-01

    Full Text Available O morango é um pseudofruto muito apreciado pela população brasileira, e seu cultivo vem sendo implantado na região de Lavras. É um alimento funcional, pois, além das suas propriedades nutricionais, também possui substâncias ativas, que mantêm ou melhoram a saúde do organismo humano. O objetivo deste trabalho foi avaliar alguns compostos do morango que tenham efeitos benéficos para a saúde humana, em diferentes cultivares da região de Lavras-MG. O delineamento utilizado foi o inteiramente casualizado, com três tratamentos e 7 repetições de 5 frutos cada. Foram colhidos 150 frutos de três cultivares: 'Aroma', 'Oso grande' e 'Toyorrinho', os quais foram selecionados de acordo com o estádio de maturação e ausência de injúrias. Os compostos avaliados foram vitamina C, compostos fenólicos e minerais, dentre os quais o potássio, cálcio, magnésio, ferro, cobre, manganês e zinco. Entre as três cultivares, a 'Aroma' foi a que mais se destacou em relação à vitamina C e potássio; a cultivar 'Oso grande' obteve os maiores teores de cálcio, ferro, manganês, zinco e cobre, e a 'Toyorrinho' apresentou os menores teores dos compostos funcionais estudados.The strawberry is a pseudo-fruit highly appreciated by the Brazilian population, and its growing has been being established in the region of Lavras. It is a functional food, because in addition to its nutritional properties, it also has active substances, which maintain or improve the health of the human organism. The aim of this work was to evaluate a few compounds of the strawberry, which have beneficial effects to human health in different cultivars of the region of Lavras-MG. It was used the completely randomized design with three treatments and seven replicates of five fruits each. A hundred and fifty fruits from three cultivars, 'Aroma', 'Oso Grande' and 'Toyorrinho' were harvested; those were selected according to the maturation stage and absence of injuries. The

  16. Impact of vibration and agitation speed on dissolution of USP prednisone tablets RS and various IR tablet formulations.

    Science.gov (United States)

    Seeger, Nicole; Lange, Sigrid; Klein, Sandra

    2015-08-01

    Dissolution testing is an in vitro procedure which is widely used in quality control (QC) of solid oral dosage forms and, given that real biorelevant test conditions are applied, can also be used as a predictive tool for the in vivo performance of such formulations. However, if a dissolution method is intended to be used for such purposes, it has to deliver results that are only determined by the quality of the test product, but not by other variables. In the recent past, more and more questions were arising on how to address the effects of vibration on dissolution test results. The present study was performed to screen for the correlation of prednisone dissolution of USP Prednisone Tablets RS with vibration caused by a commercially available vibration source as well as to investigate how drug release from a range of immediate release formulations containing class 1-4 drugs of the biopharmaceutical classification scheme is affected by vibration when performing dissolution experiments at different agitation rates. Results of the present study show that the dissolution process of oral drug formulations can be affected by vibration. However, it also becomes clear that the degree of which a certain level of vibration impacts dissolution is strongly dependent on several factors such as drug properties, formulation parameters, and the design of the dissolution method. To ensure the establishment of robust and predictive dissolution test methods, the impact of variation should thus be considered in method design and validation.

  17. Comparative kinetic studies of Mn2+-activated and fructose-1,6-P-modified Mg2+-activated pyruvate kinase from Concholepas concholepas.

    Science.gov (United States)

    Carvajal, N; González, R; Morán, A; Oyarce, A M

    1985-01-01

    Initial velocity and product inhibition studies of Mn2+-activated and FDP-modified Mg2+-activated pyruvate kinase from Concholepas concholepas, were performed. Evidence is presented to show that the Mn2+-enzyme catalyzes an ordered sequential mechanism, with ADP being the first substrate and pyruvate the last product. The results presented are consistent with a random combination of reactants with the FDP-modified Mg2+-activated enzyme and the formation of the dead-end complexes enzyme ADP-ATP and enzyme-PEP-ATP.

  18. A DFT-based comparative equilibrium study of thermal dehydration and hydrolysis of CaCl2 hydrates and MgCl2 hydrates for seasonal heat storage

    NARCIS (Netherlands)

    Pathak, A.D.; Gaastra-Nedea, S.V.; Zondag, H.A.; Rindt, C.C.M.; Smeulders, D.M.J.

    2016-01-01

    Salt hydrates store solar energy in chemical form via a reversible dehydration–hydration reaction. However, as a side reaction to dehydration, hydrolysis (HCl formation) may occur in chloride based salt hydrates (specially in MgCl2 hydrates), affecting the durability of the storage system. The

  19. Compared production behavior of borax and unborax premixed SiC reinforcement Al7Si-Mg-TiB alloys composites with semi-solid stir casting method

    Science.gov (United States)

    Haryono, M. B.; Sulardjaka, Nugroho, Sri

    2016-04-01

    The present study was aimed to investigate the effect of borax additive on physical and mechanical properties of Al7Si-Mg-TiB with the reinforcement of silicon carbide. In this case, the different weight percentage from the reinforcement of SiC (10, 15, and 20% wt), and the borax additive (ratio 1:4) were homogenously added into the matrix by employing the semi-solid stir casting method at the temperature of 590°C. Al7Si-Mg-TiB melted in an electric resistance furnace at 800°C for 25 minutes and the holding time of 5 minutes; SiC was stirred with borax inside the chamber and heated at the temperature of 250°C for 25 minutes. Then, it melted by lowing the temperature into 590°C. The SiC-borax mixture was added into the electric resistance furnace, and automatically stirred by the stirrer at a constant speed (500 rpm for 3 minutes) in the composite A17Si-Mg-TiB. It melted when heated at 750°C for 17minutes,then, casting was performed on the prepared mould. The characterizations of Al7Si-Mg-TiB-SiC/borax were porosity, hardness, and microstructure on the Al7Si-Mg-TiB-SiC/ borax. The porosity of AMC tended to increase along with the increaseof the wt% SiC (1.4%-3.6%); however, borax additive underwent a decrease in porosity (0.14%-1.3%). Further, hardness tended to improve along with the increase of wt% SiC. The unboraxmixture had 79,6 HRB up to 94 HRB. Whereas, the borax additive mixture had 105,8 HRB up to 121 HRB.

  20. A comparative study of radiation damage in Al2O3, FeTiO3, and MgTiO3

    International Nuclear Information System (INIS)

    Mitchell, J.N.; Yu, Ning; Sickafus, K.E.; Nastasi, M.; Taylor, T.N.; McClellan, K.J.; Nord, G.L. Jr.

    1995-01-01

    Oriented single crystals of synthetic alpha-alumina (α-Al 2 O 3 ), geikielite (MgTiO 3 ) natural ilmenite (FeTiO 3 ) were irradiated with 200 keV argon ions under cryogenic conditions (100 K) to assess their damage response. Using Rutherford backscattering spectrometry combined with ion channeling techniques, it was found that ilmenite amorphized readily at doses below 5x10 14 , alumina amorphized at a dose of 1-2x 15 , and geikielite was amorphized at ∼2x10 15 Ar cm -2 . The radiation damage response of the ilmenite crystal may be complicated by the presence of hematite exsolution lamellae and the experimentally induced oxidation of iron. The relative radiation-resistance of geikielite holds promise for similar behavior in other Mg-Ti oxides

  1. A Comparative Study of [CaEDTA](2-) and [MgEDTA](2-): Structural and Dynamical Insights from Quantum Mechanical Charge Field Molecular Dynamics.

    Science.gov (United States)

    Tirler, Andreas O; Hofer, Thomas S

    2015-07-09

    Structure and dynamics of [MgEDTA](2-) and [CaEDTA](2-) complexes in aqueous solution have been investigated via quantum mechanical/molecular mechanical (QM/MM) simulations. While for the first a 6-fold octahedral complex has been observed, the presence of an additional coordinating water ligand has been observed in the latter case. Because of rapidly exchanging water molecules, this 7-fold coordination complex was found to form pentagonal bipyramidal as well as capped trigonal prismatic configurations along the simulation interchanging on the picosecond time scale. Also in the case of [MgEDTA](2-) a trigonal prismatic configuration has been observed for a very short time period of approximately 1 ps. This work reports for the first time the presence of trigonal prismatic structures observed in the coordination sphere of [MgEDTA](2-) and [CaEDTA](2-) complexes in aqueous solution. In addition to the detailed characterization of structure and dynamics of the systems, the prediction of the associated infrared spectra indicates that the ion-water vibrational mode found at approximately 250 cm(-1) provides a distinctive measure to experimentally detect the presence of the coordinating water molecule via low-frequency IR setups.

  2. Combination therapy with rituximab, low-dose cyclophosphamide, and prednisone for idiopathic membranous nephropathy: a case series.

    Science.gov (United States)

    Cortazar, Frank B; Leaf, David E; Owens, Charles T; Laliberte, Karen; Pendergraft, William F; Niles, John L

    2017-02-01

    Membranous nephropathy is a common cause of the nephrotic syndrome. Treatment with standard regimens fails to induce complete remission in most patients. We evaluated the efficacy of combination therapy with rituximab, low-dose, oral cyclophosphamide, and an accelerated prednisone taper (RCP) for the treatment of idiopathic membranous nephropathy. We analyzed 15 consecutive patients with idiopathic membranous nephropathy treated with RCP at Massachusetts General Hospital. Seven patients (47%) received RCP as initial therapy, and the other eight patients (53%) received RCP for relapsing or refractory disease. All patients had at least 1 year of follow-up. The co-primary outcomes were attainment of partial and complete remission. Partial remission was defined as a urinary protein to creatinine ratio (UPCR) RCP resulted in high rates of complete remission. Larger studies evaluating this regimen are warranted.

  3. Clinical Outcomes from Androgen Signaling-directed Therapy after Treatment with Abiraterone Acetate and Prednisone in Patients with Metastatic Castration-resistant Prostate Cancer: Post Hoc Analysis of COU-AA-302.

    Science.gov (United States)

    Smith, Matthew R; Saad, Fred; Rathkopf, Dana E; Mulders, Peter F A; de Bono, Johann S; Small, Eric J; Shore, Neal D; Fizazi, Karim; Kheoh, Thian; Li, Jinhui; De Porre, Peter; Todd, Mary B; Yu, Margaret K; Ryan, Charles J

    2017-07-01

    In the COU-AA-302 trial, abiraterone acetate plus prednisone significantly increased overall survival for patients with chemotherapy-naïve metastatic castration-resistant prostate cancer (mCRPC). Limited information exists regarding response to subsequent androgen signaling-directed therapies following abiraterone acetate plus prednisone in patients with mCRPC. We investigated clinical outcomes associated with subsequent abiraterone acetate plus prednisone (55 patients) and enzalutamide (33 patients) in a post hoc analysis of COU-AA-302. Prostate-specific antigen (PSA) response was assessed. Median time to PSA progression was estimated using the Kaplan-Meier method. The PSA response rate (≥50% PSA decline, unconfirmed) was 44% and 67%, respectively. The median time to PSA progression was 3.9 mo (range 2.6-not estimable) for subsequent abiraterone acetate plus prednisone and 2.8 mo (range 1.8-not estimable) for subsequent enzalutamide. The majority of patients (68%) received intervening chemotherapy before subsequent abiraterone acetate plus prednisone or enzalutamide. While acknowledging the limitations of post hoc analyses and high censoring (>75%) in both treatment groups, these results suggest that subsequent therapy with abiraterone acetate plus prednisone or enzalutamide for patients who progressed on abiraterone acetate is associated with limited clinical benefit. This analysis showed limited clinical benefit for subsequent abiraterone acetate plus prednisone or enzalutamide in patients with metastatic castration-resistant prostate cancer following initial treatment with abiraterone acetate plus prednisone. This analysis does not support prioritization of subsequent abiraterone acetate plus prednisone or enzalutamide following initial therapy with abiraterone acetate plus prednisone. Copyright © 2017 European Association of Urology. Published by Elsevier B.V. All rights reserved.

  4. A randomized, double-blind, multicentre study comparing daily 2 and 5 mg of tropisetron for the control of nausea and vomiting induced by low-dose cisplatin- or non-cisplatin-containing chemotherapy

    NARCIS (Netherlands)

    Wymenga, ANM; vanderGraaf, WTA; Wils, JA; vanHeukelom, LS; vanderLinden, GHM; DullemondWestland, AC; Nooy, M; vanderHeul, C; deBruijn, KM; deVries, EGE

    Background: This study compares efficacy safety and tolerability of 2 and 5 mg tropisetron in prevention of nausea and vomiting induced by low-dose cisplatin- or non-cisplatin-containing chemotherapy. Patients and methods: 152 chemotherapy-naive cancer patients were randomized in a double-blind

  5. A randomized assessor-blind trial comparing highly purified hMG and recombinant FSH in a GnRH antagonist cycle with compulsory single-blastocyst transfer

    DEFF Research Database (Denmark)

    Devroey, Paul; Pellicer, Antonio; Nyboe Andersen, Anders

    2012-01-01

    MG versus 27% with rFSH for the per-protocol (PP) population and 29% versus 27% for the intention-to-treat (ITT) population. Noninferiority of hphMG compared to rFSH was established. Considering frozen cycles initiated within 1 year, the cumulative live birth rate for a single stimulation cycle was 40...... blastocyst replacement in natural cycles initiated within 1 year of each patient's start of treatment. MAIN OUTCOME MEASURE(S): Ongoing pregnancy (primary end point) and live birth rates, as well as pharmacodynamic parameters. RESULT(S): The ongoing pregnancy rate after a fresh cycle was 30% with hph...

  6. Expression of CD40 is a positive prognostic factor of diffuse large B-cell lymphoma treated with R-CHOP (rituximab, cyclophosphamide, doxorubicin, vincristine, and prednisone

    Directory of Open Access Journals (Sweden)

    Song G

    2016-06-01

    Full Text Available Guoqi Song,1 Huiyun Ni,1 Linqing Zou,2 Shukui Wang,3 Fuliang Tian,4 Hong Liu,1 William C Cho5 1Department of Hematology, Affiliated Hospital of Nantong University, Nantong, 2Department of Human Anatomy, Nantong University, Nantong, 3Central Laboratory of Nanjing First Hospital, Nanjing Medical University, Nanjing, 4Maternal and Child Health Hospital of Lianyungang, Lianyungang, Jiangsu, People’s Republic of China; 5Department of Clinical Oncology, Queen Elizabeth Hospital, Kowloon, Hong Kong Objectives: The objective of this study was to investigate the expression level of CD40 and its role in the prognosis of patients with diffuse large B-cell lymphoma (DLBCL who were treated with rituximab-CHOP (rituximab, cyclophosphamide, doxorubicin, vincristine, and prednisone.Design and methods: The immunohistochemical expressions of CD40 in 186 well-characterized DLBCL patients were evaluated by tissue microarrays, thereby revealing the relationship of the molecule CD40 with known tumor, patient-related variables, and survival rates.Results: The results showed that CD40 expressions were not statistically different between the germinal center B-cell-like (GCB type and the non-GCB type. We also analyzed the relationships of CD40 expression with overall survival (OS and progression-free survival (PFS in DLBCL patients who were uniformly treated with R-CHOP. A low expression of CD40 compared to high expression is related to poor OS and PFS. Conclusion: Our findings indicate that the CD40 level at onset acts as an independent prognostic predictor of DLBCL patients treated with R-CHOP. Keywords: CD40, diffuse large B-cell lymphoma, R-CHOP, prognostic factor

  7. A Comparative Study on the Static Recrystallization Behavior of Cold-Rolled Mg-3Al-1Zn Alloy Stimulated by Electropulse Treatment and Conventional Heat Treatment

    Science.gov (United States)

    Li, Xiaopei; Li, Xiaohui; Kure-Chu, Song-Zhu; Tang, Guoyi

    2018-02-01

    Cold-rolled AZ31 Mg alloy strips, with a reduction of 33 pct, were subjected to electropulse treatment (EPT) and conventional heat treatment (HT) to evaluate the respective influences of electropulses and temperature on the recrystallization behavior of AZ31. The highest measured temperature during the EPT (543 K) was used in HT. The electron backscattered diffraction results demonstrated that the EPT-stimulated recrystallization was completed within 8 seconds, whereas for HT, recrystallization was still far from completion even after 240 seconds. It was found that both the nucleation and grain growth of these two processes were totally different. In the EPT samples, nucleation tended to occur preferentially near extension twin boundaries and grain boundaries by continuous recrystallization, whereas in the HT samples, nucleation occurred mainly by grain boundaries bulging via discontinuous recrystallization. As grain growth proceeded, the texture intensities of the EPT samples decreased gradually and finally evolved into an obvious transverse-direction-split texture. This is likely attributable to the impact of electropulses on the boundary energy and the contribution of nonbasal dislocations; however, the basal-type textures of the HT samples were notably strengthened, which is associated with a 30 deg〈0001〉 orientation with respect to the deformed texture.

  8. Is Tamsulosin 0.2 mg Effective and Safe as a First-Line Treatment Compared with Other Alpha Blockers?: A Meta-Analysis and a Moderator Focused Study.

    Science.gov (United States)

    Shim, Sung Ryul; Kim, Jae Heon; Chang, In Ho; Shin, In Soo; Hwang, Sung Dong; Kim, Khae Hwan; Yoon, Sang Jin; Song, Yun Seob

    2016-03-01

    Tamsulosin 0.2 mg is used widely in Asian people, but the low dose has been studied less than tamsulosin 0.4 mg or other alpha blockers of standard dose. This study investigated the efficacy and safety of tamsulosin 0.2 mg by a meta-analysis and meta-regression. We conducted a meta-analysis of efficacy of tamsulosin 0.2 mg using International Prostate Symptom Score (IPSS), maximal urinary flow rate (Qmax), post-voided residual volume (PVR), and quality of life (QoL). Safety was analyzed using adverse events. Relevant studies were searched using MEDLINE, EMBASE, and Cochrane library from January 1980 to June 2013. Ten studies were included with a total sample size of 1418 subjects [722 tamsulosin 0.2 mg group and 696 other alpha-blockers (terazosin, doxazosin, naftopidil, silodosin) group]. Study duration ranged from 4 to 24 weeks. The pooled overall standardized mean differences (SMD) in the mean change of IPSS from baseline for the tamsulosin group versus the control group was 0.02 [95% confidence interval (CI); -0.20, 0.25]. The pooled overall SMD in the mean change of QoL from baseline for the tamsulosin group versus the control group was 0.16 (95% CI; -0.16, 0.48). The regression analysis with the continuous variables (number of patients, study duration) revealed no significance in all outcomes as IPSS, QoL, and Qmax. This study clarifies that tamsulosin 0.2 mg has similar efficacy and fewer adverse events compared with other alpha-blockers as an initial treatment strategy for men with lower urinary tract symptoms.

  9. Initial paclitaxel improves outcome compared with CMFP combination chemotherapy as front-line therapy in untreated metastatic breast cancer.

    Science.gov (United States)

    Bishop, J F; Dewar, J; Toner, G C; Smith, J; Tattersall, M H; Olver, I N; Ackland, S; Kennedy, I; Goldstein, D; Gurney, H; Walpole, E; Levi, J; Stephenson, J; Canetta, R

    1999-08-01

    To determine the place of single-agent paclitaxel compared with nonanthracycline combination chemotherapy as front-line therapy in metastatic breast cancer. Patients with previously untreated metastatic breast cancer were randomized to receive either paclitaxel 200 mg/m(2) intravenously (IV) over 3 hours for eight cycles (24 weeks) or standard cyclophosphamide 100 mg/m(2)/d orally on days 1 to 14, methotrexate 40 mg/m(2) IV on days 1 and 8, fluorouracil 600 mg/m(2) IV on days 1 and 8, and prednisone 40 mg/m(2)/d orally on days 1 to 14 (CMFP) for six cycles (24 weeks) with epirubicin recommended as second-line therapy. A total of 209 eligible patients were randomized with a median survival duration of 17.3 months for paclitaxel and 13.9 months for CMFP. Multivariate analysis showed that patients who received paclitaxel survived significantly longer than those who received CMFP (P =.025). Paclitaxel produced significantly less severe leukopenia, thrombocytopenia, mucositis, documented infections (all P = .07). Initial paclitaxel was associated with significantly less myelosuppression and fewer infections, with longer survival and similar quality of life and control of metastatic breast cancer compared with CMFP.

  10. Cell proliferation and DNA dependent DNA polymerase estimation in acute lymphoblastic leukaemia during treatment with prednisone and vincristine

    Energy Technology Data Exchange (ETDEWEB)

    Lange Wantzin, G [Rigshospitalet, Copenhagen (Denmark)

    1979-01-01

    The presence of DNA polymerase and primer-template DNA in lymphoblast nuclei by measuring the in vitro incorporation of /sup 3/H-thymidine-5'-triphosphate (/sup 3/H-TTP) was studied in 10 patients with acute lymphoblastic leukemia. Protein synthesis and various other cytokinetic parameters were also studied. After prednisone (P) administration a marked decrease in /sup 3/H-TTP labelling index (/sup 3/H-TTP LI) was apparent together with an inhibition of /sup 3/H-leucine incorporation (/sup 3/H-LEU LI) into lymphoblasts. A moderate decrease in /sup 3/H-TDR labelling index (/sup 3/H-TDR LI) and a later decrease in mitotic index (MI) were seen. Single cell DNA measurements showed a depletion of /sup 3/H-TDR labelled lymphoblasts in early part of S-phase apparent at 24 h lasting up to 54 h after P administration. Vincristine given as a flash injection later in the study period caused an immediate rise of the MI, at the same time the P induced decline in /sup 3/H-TTP LI, /sup 3/H-TDR LI and /sup 3/H-LEU LI were continued in most patients. P is thought to damage the cells both in and outside the cell cycle. In the cell cycle the effect of P is an arresting effect in G/sub 1/.

  11. Cell proliferation and DNA dependent DNA polymerase estimation in acute lymphoblastic leukaemia during treatment with prednisone and vincristine

    International Nuclear Information System (INIS)

    Lange Wantzin, G.

    1979-01-01

    The presence of DNA polymerase and primer-template DNA in lymphoblast nuclei by measuring the in vitro incorporation of 3 H-thymidine-5'-triphosphate ( 3 H-TTP) was studied in 10 patients with acute lymphoblastic leukemia. Protein synthesis and various other cytokinetic parameters were also studied. After prednisone (P) administration a marked decrease in 3 H-TTP labelling index ( 3 H-TTP LI) was apparent together with an inhibition of 3 H-leucine incorporation ( 3 H-LEU LI) into lymphoblasts. A moderate decrease in 3 H-TDR labelling index ( 3 H-TDR LI) and a later decrease in mitotic index (MI) were seen. Single cell DNA measurements showed a depletion of 3 H-TDR labelled lymphoblasts in early part of S-phase apparent at 24 h lasting up to 54 h after P administration. Vincristine given as a flash injection later in the study period caused an immediate rise of the MI, at the same time the P induced decline in 3 H-TTP LI, 3 H-TDR LI and 3 H-LEU LI were continued in most patients. P is thought to damage the cells both in and outside the cell cycle. In the cell cycle the effect of P is an arresting effect in G 1 . (author)

  12. Combined modality therapy of diffuse histology non-Hodgkin's lymphoma with cyclophosphamide, adriamycin, vincristine, prednisone (CHOP) and total body irradiation

    International Nuclear Information System (INIS)

    Weick, J.K.; Antunez, A.; Kraus, T.A.; Fabian, C.J.; Dixon, D.

    1983-01-01

    The combination of cyclophosphamide, adriamycin, vincristine, and prednisone (CHOP) alternating with total body irradiation (TBI) has been shown earlier to be effective therapy in patients with malignant lymphoma who have received prior chemotherapy and/or radiation therapy. A limited institutional pilot study was therefore done by the Southwest Oncology Group between October 1977, and November 1978 to test the benefit of this program in previously untreated persons with Stages 3 and 4 diffuse histology non-Hodgkin's lymphoma. Eleven evaluable patients with the following histologies were treated: 7 poorly differentiated, 2 with histiocytic, 1 with mixed lymphoma and 1 with well-differentiated morphology. Responses were seen in 8/11 patients (6 CR and 2 PR); 5 persons are currently alive and 6 are dead. The median duration of remission is 15 months and the median survival for all patients is 48 months. The therapy was well tolerated with a mean nadir leukocyte count of 3020 x 10 9 /μl (range 1.2 to 5.5) and a mean nadir platelet count of 188 x 10 9 /μl (range 016 to 270). As delivered, this program is capable of producing durable remissions and needs to be verified in a larger series of patients

  13. COMPAR

    International Nuclear Information System (INIS)

    Kuefner, K.

    1976-01-01

    COMPAR works on FORTRAN arrays with four indices: A = A(i,j,k,l) where, for each fixed k 0 ,l 0 , only the 'plane' [A(i,j,k 0 ,l 0 ), i = 1, isub(max), j = 1, jsub(max)] is held in fast memory. Given two arrays A, B of this type COMPAR has the capability to 1) re-norm A and B ind different ways; 2) calculate the deviations epsilon defined as epsilon(i,j,k,l): =[A(i,j,k,l) - B(i,j,k,l)] / GEW(i,j,k,l) where GEW (i,j,k,l) may be chosen in three different ways; 3) calculate mean, standard deviation and maximum in the array epsilon (by several intermediate stages); 4) determine traverses in the array epsilon; 5) plot these traverses by a printer; 6) simplify plots of these traverses by the PLOTEASY-system by creating input data blocks for this system. The main application of COMPAR is given (so far) by the comparison of two- and three-dimensional multigroup neutron flux-fields. (orig.) [de

  14. Neutron Powder Diffraction Measurements of the Spinel MgGa2O4:Cr3+ - A Comparative Study between the High Flux Diffractometer D2B at the ILL and the High Resolution Powder Diffractometer Aurora at IPEN

    International Nuclear Information System (INIS)

    Da Silva, M A F M; Sosman, L P; Yokaichiya, F; Henry, P F; Bordallo, H N; Mazzocchi, V L; Parente, C B R; Mestnik-Filho, J

    2012-01-01

    Optical materials that emit from the visible to the near-infrared spectral region are of great interest due to their possible application as tunable radiation sources, as signal transmission, display, optoelectronics signal storage, cellulose industry as well as in dosimetry. One important family of such systems are the spinel compounds doped with Cr 3+ , in which the physical the properties are related to the insertion of punctual defects in the crystalline structure. The purpose of our work is two fold. First, we compare the luminescence of the MgGa 2 O 4 -Ga 2 O 3 system with the single phase Ga 2 O 3 and MgGa 2 O 4 and relate structural changes observed in MgGa 2 O 4 -Ga 2 O 3 system to the optical properties, and secondly, to compare the neutron powder diffraction results obtained using two diffractometers: D2B located at the ILL (Grenoble, France) and Aurora located at IPEN (São Paulo, Brazil). In the configuration chosen, Aurora shows an improved resolution, which is related to the design of its silicon focusing monochromator.

  15. Phase I/II study on docetaxel, gemcitabine and prednisone in castrate refractory metastatic prostate cancer

    DEFF Research Database (Denmark)

    Buch-Hansen, Trine Zeeberg; Bentzen, Lars; Hansen, S.

    2010-01-01

    of liver, kidney and bone marrow; ECOG performance status a parts per thousand currency sign2 and were chemotherapy-na one (42%) were PS 0, 26 (52%) were PS 1 and 3 (6%) were PS 2. The median pre-treatment PSA was 448 (12-4.580). No dose limiting toxicity...... (TTP) was 7.9 months and overall survival (OS) was 13.9 months. Thirty-seven patients (74%) developed neutropenia, non-haematological toxicity was modest. The PSA response rate was promising and the toxicity of DGP was manageable; however OS was comparable to results of treatment with single agent...

  16. Recovery of sperm production following radiation therapy for Hodgkin's disease after induction chemotherapy with mitoxantrone, vincristine, vinblastine, and prednisone (NOVP)

    International Nuclear Information System (INIS)

    Dubey, Praveen; Wilson, Gene; Mathur, Kevin K.; Hagemeister, Frederick B.; Fuller, Lillian M.; Ha, Chul S.; Cox, James D.; Meistrich, Marvin L.

    2000-01-01

    Purpose: The effect on human male fertility of radiotherapy following chemotherapy for the treatment of Hodgkin's disease (HD) is unknown. The impact of radiation therapy, given after mitoxantrone, vincristine, vinblastine, and prednisone (NOVP) chemotherapy, on sperm production is the focus of this study. Patients: Serial semen analyses were performed on 34 patients with HD Stages I-III before NOVP chemotherapy, after chemotherapy prior to radiation, and after radiation therapy. The most inferior radiation portals for patients were: mantle, 1 patient; paraaortic-spleen, 3 patients; upper abdomen, 24 patients; abdominal spade, 4 patients; and pelvic, 2 patients. Testicular radiation dose measurements were available for 20 of these patients. Results: Before the start of radiation, 90% of patients were normospermic. The magnitude of the decline in sperm counts was related to the measured testicular dose and/or radiation fields employed. The minimum postradiotherapy counts, expressed as a fraction of pretreatment counts, for the various treatment groups are as follows: paraaortic-spleen, 20%; upper abdomen, testicular dose < 30 cGy, 4%; upper abdomen, testicular dose 30-39 cGy, 0.9%; abdominal spade, 0.02%; and pelvis, 0%. The time to nadir of sperm counts averaged 4.5 months. Recovery to normospermic levels occurred in 96% of patients, with most recovering to that level within 18 months. Conclusion: The effect of radiation following NOVP chemotherapy on sperm counts was no greater than would be expected with radiation therapy alone. In most patients, sperm counts recovered to levels compatible with normal fertility

  17. Cost-effectiveness of lenalidomide plus dexamethasone vs. bortezomib plus melphalan and prednisone in transplant-ineligible U.S. patients with newly-diagnosed multiple myeloma.

    Science.gov (United States)

    Usmani, S Z; Cavenagh, J D; Belch, A R; Hulin, C; Basu, S; White, D; Nooka, A; Ervin-Haynes, A; Yiu, W; Nagarwala, Y; Berger, A; Pelligra, C G; Guo, S; Binder, G; Gibson, C J; Facon, T

    2016-01-01

    To conduct a cost-effectiveness assessment of lenalidomide plus dexamethasone (Rd) vs bortezomib plus melphalan and prednisone (VMP) as initial treatment for transplant-ineligible patients with newly-diagnosed multiple myeloma (MM), from a U.S. payer perspective. A partitioned survival model was developed to estimate expected life-years (LYs), quality-adjusted LYs (QALYs), direct costs and incremental costs per QALY and LY gained associated with use of Rd vs VMP over a patient's lifetime. Information on the efficacy and safety of Rd and VMP was based on data from multinational phase III clinical trials and a network meta-analysis. Pre-progression direct costs included the costs of Rd and VMP, treatment of adverse events (including prophylaxis) and routine care and monitoring associated with MM. Post-progression direct costs included costs of subsequent treatment(s) and routine care and monitoring for progressive disease, all obtained from published literature and estimated from a U.S. payer perspective. Utilities were obtained from the aforementioned trials. Costs and outcomes were discounted at 3% annually. Relative to VMP, use of Rd was expected to result in an additional 2.22 LYs and 1.47 QALYs (discounted). Patients initiated with Rd were expected to incur an additional $78,977 in mean lifetime direct costs (discounted) vs those initiated with VMP. The incremental costs per QALY and per LY gained with Rd vs VMP were $53,826 and $35,552, respectively. In sensitivity analyses, results were found to be most sensitive to differences in survival associated with Rd vs VMP, the cost of lenalidomide and the discount rate applied to effectiveness outcomes. Rd was expected to result in greater LYs and QALYs compared with VMP, with similar overall costs per LY for each regimen. Results of this analysis indicated that Rd may be a cost-effective alternative to VMP as initial treatment for transplant-ineligible patients with MM, with an incremental cost-effectiveness ratio

  18. Stability of biodegradable metal (Mg-Ca-Zn alloy) screws compared with absorbable polymer and titanium screws for sagittal split ramus osteotomy of the mandible using the finite element analysis model.

    Science.gov (United States)

    Lee, Jee-Ho; Han, Hyung-Seop; Kim, Yu-Chan; Lee, Jin-Yong; Lee, Bu-Kyu

    2017-10-01

    Mg-Ca-Zn alloy has been suggested for the application of fixation materials during maxillofacial surgery. We investigated the stability of Mg-Ca-Zn alloy for clinical application during orthognathic surgery. The finite element model for the fixation of sagittal split ramus osteotomy was constructed. In the bicortical screw fixation of the mandible setback condition, the stress distributions of Mg-Ca-Za alloy, polylactic acid polymer, and titanium were evaluated using the virtual model with occlusal loading of 132 N. The deformations of the three different materials of fixation screw were observed according to masticatory force ranging from 132 to 1,000 N. When comparing the stress distribution placed on cortical bone between the polymer and magnesium alloy groups, the magnesium alloy screws could bear more stress, thereby decreasing the stress, which might be distributed to other biologic components, such as the condyle and cortical ramus of the mandible. Deformations of the screws according to functional load were minimal, and the deformation remained stability of sagittal split ramus osteotomy setback surgery. Copyright © 2017. Published by Elsevier Ltd.

  19. Acid Inhibitory Effect of a Combination of Omeprazole and Sodium Bicarbonate (CDFR0209) Compared With Delayed-Release Omeprazole 40 mg Alone in Healthy Adult Male Subjects.

    Science.gov (United States)

    Kim, Kyu-Nam; Yang, Sung-Won; Kim, Hyunil; Kwak, Seong Shin; Kim, Young-Sang; Cho, Doo-Yeoun

    2018-01-01

    CDFR0209, a combination of an immediate-release formulation of omeprazole 40 mg and sodium bicarbonate 1100 mg, has been developed to treat acid-related disorders. We compared the acid inhibitory effects of CDFR0209 and delayed-release omeprazole (omeprazole-DR, Losec 40 mg) after repeated dosing in Helicobacter pylori-negative healthy adult male subjects. In this 2-period crossover study, 30 subjects were randomized to CDFR0209 or omeprazole-DR daily for 7 days. An ambulatory continuous 24-hour intragastric pH recording was performed at baseline and on days 1 and 7 of each administration period. Integrated gastric acidity was calculated from time-weighted average hydrogen ion concentrations at each hour of the 24-hour record. An analysis of variance model was used to test the pharmacodynamic equivalence of CDFR0209 and omeprazole-DR, using the natural logarithmic transformation of the percent decrease from baseline in integrated gastric acidity for the 24-hour interval after the seventh dose of each omeprazole formulation. The geometric least-squares mean ratios (CDFR0209/omeprazole-DR) of the percent decrease from baseline in integrated gastric acidity was 0.98 (90%CI, 0.93-1.07). Both CDFR0209 and omeprazole-DR are equally effective in decreasing integrated gastric acidity at steady state. © 2017, The American College of Clinical Pharmacology.

  20. Neutron Powder Diffraction Measurements of the Spinel MgGa 2 O 4 :Cr 3+ - A Comparative Study between the High Flux Diffractometer D2B at the ILL and the High Resolution Powder Diffractometer Aurora at IPEN

    DEFF Research Database (Denmark)

    Silva, M A F M da; Sosman, L P; Yokaichiya, F

    2012-01-01

    Optical materials that emit from the visible to the near-infrared spectral region are of great interest due to their possible application as tunable radiation sources, as signal transmission, display, optoelectronics signal storage, cellulose industry as well as in dosimetry. One important family...... of such systems are the spinel compounds doped with Cr 3+ , in which the physical the properties are related to the insertion of punctual defects in the crystalline structure. The purpose of our work is two fold. First, we compare the luminescence of the MgGa 2 O 4 -Ga 2 O 3 system with the single phase Ga 2 O 3...

  1. Evaluación comparativa de la liberación in vitro de risperidona 3 mg producida en Cuba contra Risperdal® Comparative assessment of in vitro release of 3 mg Risperidone produced in Cuba versus Risperidal®

    Directory of Open Access Journals (Sweden)

    Caridad Margarita García Peña

    2010-06-01

    Full Text Available Se compararon los perfiles de disolución de las tabletas de risperidona 3 mg medicamento genérico producido en Cuba y del Risperdal® (Laboratorios Janssen-Cilag SA, para demostrar su similitud. También se realizó la comparación en varios medios de disolución a diferentes pH para evaluar una posible bioexoneración. Para la cuantificación del principio activo, se utilizó un método por cromatografía líquida de alta resolución, previamente validado. La comparación se realizó sobre la base de los factores de diferenciación y similitud. Los resultados mostraron que no existían diferencias en los perfiles de liberación para las tabletas producidas en Cuba y del producto innovador, así como para los diferentes medios de disolución a los pH utilizados.The 3 mg Risperidone tablets dissolution profiles, a generic drug produced in Cuba and the Risperidal® (Janssen-Cilag S.A. Labs were compared to demonstrate its similarity. Also, we compared some dissolution means at different pH to assess a potential bio-exoneration. To quantify the active principle, a previously validated high-performance liquid chromatography was used. The comparison was conducted on the base of differentiation and similarity factors. Results demonstrated that there weren't differences en release profiles for tablets produced in Cuba and of innovative product, as well as for the different dissolution means at pH used.

  2. Comparative trial of two intravenous doses of granisetron (1 versus 3 mg) in the prevention of chemotherapy-induced acute emesis: a double-blind, randomized, non-inferiority trial.

    Science.gov (United States)

    Tsuji, Daiki; Kim, Yong-Il; Taku, Keisei; Nakagaki, Shigeru; Ikematsu, Yoshito; Tsubota, Hiromi; Maeda, Masato; Hashimoto, Naoya; Kimura, Masayuki; Daimon, Takashi

    2012-05-01

    A single 3 mg or 40 μg/kg intravenous dose of granisetron combined with dexamethasone is routinely used in several countries, although the antiemetic guidelines have recommended granisetron at the dose of 1 mg or 10 μg/kg. A randomized, multicenter trial was conducted to determine the optimal intravenous granisetron dose, 1 or 3 mg, in cancer patients receiving emetogenic chemotherapy. We enrolled 365 patients and randomly assigned them to receive intravenous granisetron 3 mg (3-mg group) or 1 mg (1-mg group), combined with dexamethasone at an adequate dose fixed as per the emetic risk category. The primary end point was the proportion of patients with a complete response during the first 24 h after chemotherapy. The study demonstrated that 1 mg of granisetron was not inferior in effect to 3 mg. For the primary end point, 359 patients were evaluable according to the modified intention-to-treat (ITT) analysis. Complete protection was achieved in the modified ITT population, 90.6% and 88.8% for the 3- and 1-mg groups, respectively (p granisetron is not inferior to 3 mg when both doses are combined with dexamethasone. Therefore, 1-mg dose of intravenous granisetron should be the recommended prophylactic regimen for the prevention of acute emesis.

  3. Early effect on general interest, and short-term antidepressant efficacy and safety of agomelatine (25-50mg/day) and escitalopram (10-20mg/day) in outpatients with Major Depressive Disorder. A 12-week randomised double-blind comparative study.

    Science.gov (United States)

    Udristoiu, T; Dehelean, P; Nuss, Ph; Raba, V; Picarel-Blanchot, F; de Bodinat, C

    2016-07-15

    A double-blind, randomized, study was conducted in 29 centers in Romania to evaluate the effect of agomelatine 25-50mg/day (n=144 patients) on general interest, overall clinical efficacy, and functionality in comparison with escitalopram 10-20mg/day (n=143 patients) in out-patients diagnosed with moderate to severe Major Depressive Disorder (MDD). The primary endpoint of the study was the score difference between agomelatine and escitalopram were assessed on the item 13 of the Quick Inventory of Depressive Symptomatology (16-Item) Self-Report (QIDS-SR16) over the first week period. Secondary measures include the primary criterion on the 12-week period, the within-group evolution over 12 weeks of the 17-item Hamilton Depression Scale (HAM-D17) total score, CGI severity of illness (CGI-S) and CGI-I scores, and functionality by using the self-rated Sheehan Disability Scale (SDS). After one week, the mean General Interest score showed no statistically significant difference between treatments. Over 12 weeks, patients felt more and more interested in other people and activities than before having taken medication. Both agomelatine and escitalopram improved depressive symptoms and symptom-related functional impairment of patients. Both agomelatine and escitalopram were well-tolerated by patients. The strength of our results would benefit from additional data from trials using a similar design and other active comparators. There was no difference in week 1 changes of interest between agomelatine and escitalopram. The relatively good tolerability of agomelatine and escitalopram is confirmed. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Comparative bioavailability and tolerability of a single 20-mg dose of two fluoxetine hydrochloride dispersible tablet formulations in fasting, healthy Chinese male volunteers: an open-label, randomized-sequence, two-period crossover study.

    Science.gov (United States)

    Shi, Shaojun; Liu, Yani; Wu, Jianhong; Li, Zhongfang; Zhao, Yan; Zhong, Dafang; Zeng, Fandian

    2010-10-01

    The proprietary formulation of fluoxetine hydrochloride is an antidepressant of the selective serotonin reuptake inhibitor class. Pharmacokinetic studies investigating the bioequivalence of generic and branded formulations are needed to market generic fluoxetine in China. The aim of this study was to compare the bioavailability and tolerability of the proposed generic formulation with the established reference formulation of fluoxetine hydrochloride 20 mg in a fasting, healthy Chinese male population. This 10-week, open-label, randomized-sequence, single-dose, 2-period crossover study was conducted in healthy native Han Chinese male volunteers. Eligible subjects were randomly assigned in a 1:1 ratio to receive a single 20-mg dose of the test or reference formulation, followed by a 35-day washout period and administration of the alternate formulation. Doses were administered after a 12-hour overnight fast. For analysis of pharmacokinetic properties (including C(max), T(max), AUC(0-t), AUC(0-∞), and t(½)), blood samples were obtained over a 672-hour period after dosing. Plasma concentrations of fluoxetine and its active metabolite, norfluoxetine, were analyzed using a validated LC-MS/MS method. The formulations were to be considered bioequivalent if the ln-transformed ratios (test/ reference) of C(max) and AUC were within the predetermined bioequivalence range of 80% to 125%, as established by the US Food and Drug Administration, and if the P values were fasting, healthy Chinese male volunteers. Both formulations appeared to be well tolerated. Copyright © 2010 Excerpta Medica Inc. All rights reserved.

  5. Comparative study on catalytic behavior of polynuclear Mg-Mo-complex and FeMo-co-factor of nitrogenase in reactions with C2H2, N2 and CO

    International Nuclear Information System (INIS)

    Bardina, N.V.; Bazhenova, T.A.; Petrova, G.N.; Shilova, A.K.; Shilov, A.E.

    2006-01-01

    Catalytic reduction kinetics of C 2 H 2 in the presence of the Mg-Mo-cluster {[Mg 2 Mo 8 O 22 (MeO) 6 (MeOH) 4 ] 2- [Mg(MeOH) 6 ] 2+ }·6MeOH 1 is studied. Several interdependent coordinating centers are active in reference to substrates and inhibitors in the polynuclear Mg-Mo-complex, as in the reduced by europium amalgam (μ 6 -N)MoFe 7 S 9 ·homocitrate (FeMoco, 2). Comparison of regularities in reduction mechanism of C 2 H 2 , N 2 and CO with the participation of synthetic polynuclear complex 1 and natural cluster 2 is conducted. Regularities of the studied reactions in the systems involving natural catalytic cluster FeMoco and the synthetic Mg-Mo-complex modelling of its effect are noted to be similar. The main variations the systems show as regards to the reaction with molecular nitrogen [ru

  6. Ferromagnetic alloy material CoFeC with high thermal tolerance in MgO/CoFeC/Pt structure and comparable intrinsic damping factor with CoFeB

    Science.gov (United States)

    Chen, Shaohai; Zhou, Jing; Lin, Weinan; Yu, Jihang; Guo, Rui; Poh, Francis; Shum, Danny; Chen, Jingsheng

    2018-02-01

    The thermal tolerance and perpendicular magnetic anisotropy (PMA) of ferromagnetic alloy Co40Fe40C20 in the structure MgO/CoFeC/Pt (or Ta) were investigated and compared with the commonly used CoFeB alloy. It is found that the PMA of CoFeC with {{K}i,CoFeC}=2.21 erg c{{m}-2} , which is 59% higher than that of CoFeB, can be obtained after proper post-annealing treatment. Furthermore, CoFeC alloy provides better thermal tolerance to temperature of 400 °C than CoFeB. The studies on ferromagnetic resonance show that the intrinsic damping constant α in of Co40Fe40C20 alloy is 0.0047, which is similar to the reported value of 0.004 for Co40Fe40B20 alloy. The comprehensive comparisons indicate that CoFeC alloy is a promising candidate for the application of the integration of spin torque transfer magnetic random access memory with complementary metal-oxide semiconductor processes.

  7. Immunomodulatory treatment with intravenous immunoglobulin and prednisone in patients with recurrent miscarriage and implantation failure after in vitro fertilization/intracytoplasmic sperm injection

    DEFF Research Database (Denmark)

    Nyborg, Kathinka Marie; Kolte, Astrid Marie; Larsen, Elisabeth Clare

    2014-01-01

    OBJECTIVE: To assess outcome in terms of live-birth rate after fresh or frozen IVF/intracytoplasmic sperm injection assisted reproductive technology (ART) cycles where immunomodulation was given to patients with recurrent pregnancy loss after prior ART treatments. DESIGN: Retrospective cohort study....... SETTING: Tertiary care university hospital. PATIENT(S): Fifty-two patients with a history of at least three consecutive pregnancy losses after ART who underwent at least one further ART cycle with concurrent immunomodulation in 2003-2012. INTERVENTION(S): Immunomodulation with IV immunoglobulin...... and prednisone starting from before ET and continuing in the first trimester if pregnancy was established. MAIN OUTCOME MEASURE(S): Live-birth rate per ET and cumulative live-birth rate after up to five ETs. RESULT(S): Nineteen patients (36.5%) achieved a live birth after the first ET with immunomodulation...

  8. Comparison of microbiological, histological, and immunomodulatory parameters in response to treatment with either combination therapy with prednisone and metronidazole or probiotic VSL#3 strains in dogs with idiopathic inflammatory bowel disease.

    Science.gov (United States)

    Rossi, Giacomo; Pengo, Graziano; Caldin, Marco; Palumbo Piccionello, Angela; Steiner, Jörg M; Cohen, Noah D; Jergens, Albert E; Suchodolski, Jan S

    2014-01-01

    Idiopathic inflammatory bowel disease (IBD) is a common chronic enteropathy in dogs. There are no published studies regarding the use of probiotics in the treatment of canine IBD. The objectives were to compare responses to treatment with either combination therapy (prednisone and metronidazole) or probiotic strains (VSL#3) in dogs with IBD. Twenty pet dogs with a diagnosis of IBD, ten healthy pet dogs, and archived control intestinal tissues from three euthanized dogs were used in this open label study. Dogs with IBD were randomized to receive either probiotic (D-VSL#3, n = 10) or combination drug therapy (D-CT, n = 10). Dogs were monitored for 60 days (during treatment) and re-evaluated 30 days after completing treatment. The CIBDAI (Pdogs in the D-VSL#3 group compared to the D-CT group. Changes in apical junction complex molecules occludin and claudin-2 differed depending on treatment. Faecalibacterium and Turicibacter were significantly decreased in dogs with IBD at T0, with a significant increase in Faecalibacterium abundance observed in the animals treated with VSL#3 strains. A protective effect of VSL#3 strains was observed in dogs with IBD, with a significant decrease in clinical and histological scores and a decrease in CD3+ T-cell infiltration. Protection was associated with an enhancement of regulatory T-cell markers (FoxP3+ and TGF-β+), specifically observed in the probiotic-treated group and not in animals receiving combination therapy. A normalization of dysbiosis after long-term therapy was observed in the probiotic group. Larger scale studies are warranted to evaluate the clinical efficacy of VSL#3 in canine IBD.

  9. Glucose uptake regulation in E. coli by the small RNA SgrS: comparative analysis of E. coli K-12 (JM109 and MG1655 and E. coli B (BL21

    Directory of Open Access Journals (Sweden)

    Ng Weng-Ian

    2010-09-01

    Full Text Available Abstract Background The effect of high glucose concentration on the transcription levels of the small RNA SgrS and the messenger RNA ptsG, (encoding the glucose transporter IICBGlc, was studied in both E. coli K-12 (MG1655 and JM109 and E. coli B (BL21. It is known that the transcription level of sgrS increases when E. coli K-12 (MG1655 and JM109 is exposed to the non-metabolized glucose alpha methyl glucoside (αMG or when the bacteria with a defective glycolysis pathway is grown in presence of glucose. The increased level of sRNA SgrS reduces the level of the ptsG mRNA and consequently lowers the level of the glucose transporter IICBGlc. The suggested trigger for this action is the accumulation of the corresponding phospho-sugars. Results In the course of the described work, it was found that E. coli B (BL21 and E. coli K-12 (JM109 and MG1655 responded similarly to αMG: both strains increased SgrS transcription and reduced ptsG transcription. However, the two strains reacted differently to high glucose concentration (40 g/L. E. coli B (BL21 reacted by increasing sgrS transcription and reducing ptsG transcription while E. coli K-12 (JM109 and MG1655 did not respond to the high glucose concentration, and, therefore, transcription of sgrS was not detected and ptsG mRNA level was not affected. Conclusions The results suggest that E. coli B (BL21 tolerates high glucose concentration not only by its more efficient central carbon metabolism, but also by controlling the glucose transport into the cells regulated by the sRNA SgrS, which may suggest a way to control glucose consumption and increase its efficient utilization.

  10. Surface Modification of Mg and Mg Alloys

    OpenAIRE

    Turhan, Can Metehan

    2012-01-01

    Progressively, the well explored and studied mechanical properties of a bulk metal are compared with the corrosion behaviour obtained from its surface, which enables promising improvements in desired applications. An example is magnesium metal: where, by developing new types of surface modifications by understanding its inconsistent corrosion behaviour, it would be possible to apply this engineering metal safely as a biocompatible metal, in addition to its widely used application areas such a...

  11. A Randomized Clinical Trial Comparing Methotrexate and Mycophenolate Mofetil for Non-Infectious Uveitis

    Science.gov (United States)

    Rathinam, Sivakumar R; Babu, Manohar; Thundikandy, Radhika; Kanakath, Anuradha; Nardone, Natalie; Esterberg, Elizabeth; Lee, Salena M; Enanoria, Wayne TA; Porco, Travis C; Browne, Erica N; Weinrib, Rachel; Acharya, Nisha R

    2014-01-01

    Objective To compare the relative effectiveness of methotrexate and mycophenolate mofetil for non-infectious intermediate uveitis, posterior uveitis, or panuveitis. Design Multicenter, block-randomized, observer-masked clinical trial Participants Eighty patients with non-infectious intermediate, posterior or panuveitis requiring corticosteroid-sparing therapy at Aravind Eye Hospitals in Madurai and Coimbatore, India. Intervention Patients were randomized to receive 25mg weekly oral methotrexate or 1g twice daily oral mycophenolate mofetil and were monitored monthly for 6 months. Oral prednisone and topical corticosteroids were tapered. Main Outcome Measures Masked examiners assessed the primary outcome of treatment success, defined by achieving the following at 5 and 6 months: (1) ≤0.5+ anterior chamber cells, ≤0.5+ vitreous cells, ≤0.5+ vitreous haze and no active retinal/choroidal lesions in both eyes, (2) ≤ 10 mg of prednisone and ≤ 2 drops of prednisolone acetate 1% a day and (3) no declaration of treatment failure due to intolerability or safety. Additional outcomes included time to sustained corticosteroid-sparing control of inflammation, change in best spectacle-corrected visual acuity, resolution of macular edema, adverse events, subgroup analysis by anatomic location, and medication adherence. Results Forty-one patients were randomized to methotrexate and 39 to mycophenolate mofetil. A total of 67 patients (35 methotrexate, 32 mycophenolate mofetil) contributed to the primary outcome. Sixty-nine percent of patients achieved treatment success with methotrexate and 47% with mycophenolate mofetil (p=0.09). Treatment failure due to adverse events or tolerability was not significantly different by treatment arm (p=0.99). There were no statistically significant differences between treatment groups in time to corticosteroid-sparing control of inflammation (p=0.44), change in best spectacle-corrected visual acuity (p=0.68), and resolution of macular

  12. A randomized clinical trial comparing methotrexate and mycophenolate mofetil for noninfectious uveitis.

    Science.gov (United States)

    Rathinam, Sivakumar R; Babu, Manohar; Thundikandy, Radhika; Kanakath, Anuradha; Nardone, Natalie; Esterberg, Elizabeth; Lee, Salena M; Enanoria, Wayne T A; Porco, Travis C; Browne, Erica N; Weinrib, Rachel; Acharya, Nisha R

    2014-10-01

    To compare the relative effectiveness of methotrexate and mycophenolate mofetil for noninfectious intermediate uveitis, posterior uveitis, or panuveitis. Multicenter, block-randomized, observer-masked clinical trial. Eighty patients with noninfectious intermediate, posterior, or panuveitis requiring corticosteroid-sparing therapy at Aravind Eye Hospitals in Madurai and Coimbatore, India. Patients were randomized to receive 25 mg weekly oral methotrexate or 1 g twice daily oral mycophenolate mofetil and were monitored monthly for 6 months. Oral prednisone and topical corticosteroids were tapered. Masked examiners assessed the primary outcome of treatment success, defined by achieving the following at 5 and 6 months: (1) ≤0.5+ anterior chamber cells, ≤0.5+ vitreous cells, ≤0.5+ vitreous haze and no active retinal/choroidal lesions in both eyes, (2) ≤10 mg of prednisone and ≤2 drops of prednisolone acetate 1% a day, and (3) no declaration of treatment failure because of intolerability or safety. Additional outcomes included time to sustained corticosteroid-sparing control of inflammation, change in best spectacle-corrected visual acuity, resolution of macular edema, adverse events, subgroup analysis by anatomic location, and medication adherence. Forty-one patients were randomized to methotrexate and 39 to mycophenolate mofetil. A total of 67 patients (35 methotrexate, 32 mycophenolate mofetil) contributed to the primary outcome. Sixty-nine percent of patients achieved treatment success with methotrexate and 47% with mycophenolate mofetil (P = 0.09). Treatment failure from adverse events or tolerability was not different by treatment arm (P = 0.99). There were no differences between treatment groups in time to corticosteroid-sparing control of inflammation (P = 0.44), change in best spectacle-corrected visual acuity (P = 0.68), or resolution of macular edema (P = 0.31). There was no statistically significant difference in corticosteroid-sparing control of

  13. Intra-individual comparison of different contrast media concentrations (300 mg, 370 mg and 400 mg iodine) in MDCT

    Energy Technology Data Exchange (ETDEWEB)

    Behrendt, Florian F.; Keil, Sebastian; Plumhans, Cedric; Guenther, Rolf W. [RWTH Aachen University, Department of Diagnostic Radiology, University Hospital, Aachen (Germany); Pietsch, Hubertus; Jost, Gregor; Sieber, Martin A.; Seidensticker, Peter [Bayer Schering Pharma AG, Berlin (Germany); Mahnken, Andreas H. [RWTH Aachen University, Department of Diagnostic Radiology, University Hospital, Aachen (Germany); RWTH Aachen University, Applied Medical Engineering, Helmholtz-Institute for Biomedical Engineering, Aachen (Germany)

    2010-07-15

    To compare intra-individual contrast enhancement in multi-detector-row computed tomography (MDCT) using contrast media (CM) containing 300, 370 and 400 mg iodine per ml (mgI/ml). Six pigs underwent repeated chest MDCT using three different CM (iopromide 300, iopromide 370, iomeprol 400). An identical iodine delivery (IDR) rate of 1.5 gI/s and a constant total iodine dose of 300 mg/kg body weight were used. Dynamic CT were acquired at the level of the pulmonary artery, and the ascending and descending aorta. After the time enhancement curves were computed, the pulmonary and aortic peak enhancement, time to peak and plateau time above 300 HU were calculated. Intra-individual peak contrast enhancement was significantly higher for the 300 mgI/ml contrast medium compared with the 370 and 400 mgI/ml media: pulmonary trunk 595 HU vs 516 HU (p = 0.0093) vs 472HU (p = 0.0005), and aorta 505 HU vs 454 HU (p = 0.0008) vs 439 HU (p = 0.0001), respectively. Comparison of time to peaks showed no significant difference. Plateau times were significantly longer for the 300 mgI/ml than for the 370 and 400 mgI/ml CM at all anatomical sites. Given normalised IDR and total iodine burden, the use of CM with a standard concentration with 300 mg iodine/ml provides improved contrast enhancement compared with highly concentrated CM in the chest. (orig.)

  14. Microstructural evolution in Mg-rich Mg-Zn-Y alloys

    International Nuclear Information System (INIS)

    Biswas, T.; Ranganathan, S.; Nair, S.; Bajargan, G.

    2005-01-01

    Mg-rich Mg-Zn-Y alloys with nominal compositions Mg 97 Zn 1 Y 2 , Mg 97 Zn 2 Y 1 , Mg 92 Zn 6.5 Y 1.5 and Mg 97-x Zn 1 Y 2 Zr x have been chosen for the present study. These alloys are prepared by using sand casting mold. The sand cast alloys are remelted and subjected to copper mold casting and melt spinning techniques. The effect of cooling rate on microstructures was studied. It is observed that the size of the precipitates decreases with an increase of cooling rate. The formation of nano precipitates results in higher strength of the alloy as compared to the conventional alloys. The microstructures of melt spun ribbons are compared with RS/PM (rapidly solidified power metallurgy) Mg 97 Zn 1 Y 2 alloy, obtained from a different source. (author)

  15. Comparative study of potentially J{sub eff} = 0 ground state iridium(V) in SrLaNiIrO{sub 6}, SrLaMgIrO{sub 6}, and SrLaZnIrO{sub 6}

    Energy Technology Data Exchange (ETDEWEB)

    Wolff, Klaus K.; Agrestini, Stefano; Tjeng, Liu Hao [Max Planck Institute for Chemical Physics of Solids, Dresden (Germany); Tanaka, Arata [Department of Quantum Matter, AdSM, Hiroshima University, Higashi-Hiroshima (Japan); Jansen, Martin [Max Planck Institute for Chemical Physics of Solids, Dresden (Germany); Max Planck Institute for Solid State Research, Stuttgart (Germany)

    2017-12-13

    A series of polycrystalline double perovskites SrLaBIrO{sub 6} (B = Ni, Mg, Zn) containing Ir{sup 5+} (5d{sup 4}) was synthesized by solid state reactions, and structural, magnetic and electronic properties were investigated. The isotypic fully ordered double perovskites crystallize in space group P2{sub 1}/n and show semiconducting behavior with estimated bandgaps of approximately 0.2 eV for SrLaNiIrO{sub 6} and SrLaZnIrO{sub 6}, and 0.4 eV for SrLaMgIrO{sub 6}. SrLaNiIrO{sub 6} is an antiferromagnet with a Neel temperature of 74 K (μ{sub eff} = 3.3 μ{sub B}, θ{sub W} = -90 K), whereas SrLaMgIrO{sub 6} and SrLaZnIrO{sub 6} are weakly paramagnetic. All title compounds exhibit a temperature-independent contribution to the measured magnetic susceptibility, which supports the notion for a van-Vleck-type response originating from the Ir{sup 5+} (5d{sup 4}, J{sub eff} = 0) ions. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  16. Improvements in health-related quality of life over 3 years with liraglutide 3.0 mg compared with placebo in participants with overweight or obesity.

    Science.gov (United States)

    Kolotkin, R L; Gabriel Smolarz, B; Meincke, H H; Fujioka, K

    2018-02-01

    Previously in the SCALE Obesity and Prediabetes trial, at 1 year, participants with obesity (or overweight with comorbidities) and prediabetes receiving liraglutide 3.0 mg experienced greater improvements in health-related quality of life (HRQoL) than those receiving placebo. The current study extends these findings by examining 3-year changes in HRQoL. HRQoL was assessed using the obesity-specific Impact of Weight on Quality of Life-Lite (IWQOL-Lite) questionnaire, as well as the Short-Form 36 v2 (SF-36) health survey. At 3 years, mean change (±standard deviation) in IWQOL-Lite total score from baseline for liraglutide (n = 1472) was 11.0 ± 14.2, vs. 8.1 ± 14.7 for placebo (n = 738) (estimated treatment difference [ETD] 3.4 [95% confidence interval (CI): 2.0, 4.7], P 3.0 mg was also associated with improved health utility (Short-Form-6D and EuroQol-5D, mapped from IWQOL-Lite and/or SF-36) vs. placebo. Liraglutide 3.0 mg, plus diet and exercise, is associated with long-term improvements in HRQoL with obesity or overweight with comorbidity vs. placebo. © 2017 The Authors. Clinical Obesity published by John Wiley & Sons Ltd on behalf of World Obesity Federation.

  17. Improvements in health‐related quality of life over 3 years with liraglutide 3.0 mg compared with placebo in participants with overweight or obesity

    Science.gov (United States)

    Gabriel Smolarz, B.; Meincke, H. H.; Fujioka, K.

    2017-01-01

    Summary Previously in the SCALE Obesity and Prediabetes trial, at 1 year, participants with obesity (or overweight with comorbidities) and prediabetes receiving liraglutide 3.0 mg experienced greater improvements in health‐related quality of life (HRQoL) than those receiving placebo. The current study extends these findings by examining 3‐year changes in HRQoL. HRQoL was assessed using the obesity‐specific Impact of Weight on Quality of Life‐Lite (IWQOL‐Lite) questionnaire, as well as the Short‐Form 36 v2 (SF‐36) health survey. At 3 years, mean change (±standard deviation) in IWQOL‐Lite total score from baseline for liraglutide (n = 1472) was 11.0 ± 14.2, vs. 8.1 ± 14.7 for placebo (n = 738) (estimated treatment difference [ETD] 3.4 [95% confidence interval (CI): 2.0, 4.7], P 3.0 mg was also associated with improved health utility (Short‐Form‐6D and EuroQol‐5D, mapped from IWQOL‐Lite and/or SF‐36) vs. placebo. Liraglutide 3.0 mg, plus diet and exercise, is associated with long‐term improvements in HRQoL with obesity or overweight with comorbidity vs. placebo. PMID:29045079

  18. Rational Design, Synthesis and Evaluation of γ-CD-Containing Cross-Linked Polyvinyl Alcohol Hydrogel as a Prednisone Delivery Platform

    Directory of Open Access Journals (Sweden)

    Adolfo Marican

    2018-03-01

    Full Text Available This study describes the in-silico rational design, synthesis and evaluation of cross-linked polyvinyl alcohol hydrogels containing γ-cyclodextrin (γ-CDHSAs as platforms for the sustained release of prednisone (PDN. Through in-silico studies using semi-empirical quantum mechanical calculations, the effectiveness of 20 dicarboxylic acids to generate a specific cross-linked hydrogel capable of supporting different amounts of γ-cyclodextrin (γ-CD was evaluated. According to the interaction energies calculated with the in-silico studies, the hydrogel made from PVA cross-linked with succinic acids (SA was shown to be the best candidate for containing γ-CD. Later, molecular dynamics simulation studies were performed in order to evaluate the intermolecular interactions between PDN and three cross-linked hydrogel formulations with different proportions of γ-CD (2.44%, 4.76% and 9.1%. These three cross-linked hydrogels were synthesized and characterized. The loading and the subsequent release of PDN from the hydrogels were investigated. The in-silico and experimental results showed that the interaction between PDN and γ-CDHSA was mainly produced with the γ-CDs linked to the hydrogels. Thus, the unique structures and properties of γ-CDHSA demonstrated an interesting multiphasic profile that could be utilized as a promising drug carrier for controlled, sustained and localized release of PDN.

  19. Effect of different seawater Mg

    NARCIS (Netherlands)

    Mewes, A.; Langer, G.; de Nooijer, L.J.; Bijma, J.; Reichart, G.J.

    2014-01-01

    Magnesium, incorporated in foraminiferal calcite (Mg/CaCC), is used intensively to reconstruct past seawater temperatures but, in addition to temperature, the Mg/CaCC of foraminiferal tests also depends on the ratio of Mg and Ca in seawater (Mg/CaSW). The physiological mechanisms responsible for

  20. Comparison of microbiological, histological, and immunomodulatory parameters in response to treatment with either combination therapy with prednisone and metronidazole or probiotic VSL#3 strains in dogs with idiopathic inflammatory bowel disease.

    Directory of Open Access Journals (Sweden)

    Giacomo Rossi

    Full Text Available BACKGROUND: Idiopathic inflammatory bowel disease (IBD is a common chronic enteropathy in dogs. There are no published studies regarding the use of probiotics in the treatment of canine IBD. The objectives were to compare responses to treatment with either combination therapy (prednisone and metronidazole or probiotic strains (VSL#3 in dogs with IBD. METHODOLOGY AND PRINCIPAL FINDINGS: Twenty pet dogs with a diagnosis of IBD, ten healthy pet dogs, and archived control intestinal tissues from three euthanized dogs were used in this open label study. Dogs with IBD were randomized to receive either probiotic (D-VSL#3, n = 10 or combination drug therapy (D-CT, n = 10. Dogs were monitored for 60 days (during treatment and re-evaluated 30 days after completing treatment. The CIBDAI (P<0.001, duodenal histology scores (P<0.001, and CD3+ cells decreased post-treatment in both treatment groups. FoxP3+ cells (p<0.002 increased in the D-VSL#3 group after treatment but not in the D-CT group. TGF-β+ cells increased in both groups after treatment (P = 0.0043 with the magnitude of this increase being significantly greater for dogs in the D-VSL#3 group compared to the D-CT group. Changes in apical junction complex molecules occludin and claudin-2 differed depending on treatment. Faecalibacterium and Turicibacter were significantly decreased in dogs with IBD at T0, with a significant increase in Faecalibacterium abundance observed in the animals treated with VSL#3 strains. CONCLUSIONS: A protective effect of VSL#3 strains was observed in dogs with IBD, with a significant decrease in clinical and histological scores and a decrease in CD3+ T-cell infiltration. Protection was associated with an enhancement of regulatory T-cell markers (FoxP3+ and TGF-β+, specifically observed in the probiotic-treated group and not in animals receiving combination therapy. A normalization of dysbiosis after long-term therapy was observed in the probiotic group. Larger

  1. Excited states in 22Mg via the 12C(12C,2n)22Mg reaction

    International Nuclear Information System (INIS)

    Jewett, Cybele; Baktash, Cyrus; Bardayan, Daniel W.; Blackmon, Jeff C.; Chipps, K.; Galindo-Uribarri, Alfredo; Greife, U.; Gross, Carl J.; Jones, K. L.; Liang, Junjien; Livesay, Jake; Kozub, R. L.; Nesaraja, Caroline D; Radford, David C.; Sarazin, F.; Smith, Michael Scott; Thomas, J. S.; Yu, Chang-Hong

    2007-01-01

    The 12C(12C, 2n)22Mg reaction was measured with the CLARION array and the RMS separator at the Holifield Facility of Oak Ridge National Laboratory. This experiment was performed to gather more information on the excited states in 22Mg, which might be of relevance to recent radioactive ion beam measurements of the astrophysically important 21Na(p,γ)22Mg reaction. The results are compared to direct measurements, transfer experiments and a competing experiment performed with Gammasphere

  2. Discharge behaviour of Mg-Al-Pb and Mg-Al-Pb-In alloys as anodes for Mg-air battery

    International Nuclear Information System (INIS)

    Wang, Naiguang; Wang, Richu; Peng, Chaoqun; Peng, Bing; Feng, Yan; Hu, Chengwang

    2014-01-01

    Highlights: • We investigate the effect of indium on the discharge behaviour of Mg-Al-Pb alloy. • We evaluate the performance of Mg-air batteries with Mg-Al-Pb and Mg-Al-Pb-In anodes. • We analyze the activation mechanism of Mg-Al-Pb-In alloy in the discharge process. - Abstract: The discharge behaviour of Mg-Al-Pb and Mg-Al-Pb-In alloys in 3.5 wt.% NaCl solution is investigated by electrochemical techniques, and compared with that of pure magnesium. The results show that Mg-Al-Pb-In alloy provides a more negative potential and exhibits a higher utilization efficiency in contrast with Mg-Al-Pb alloy and pure magnesium during the half-cell test at a large current density, and gives desirable discharge performance when used as anode for Mg- air battery. The peak power density of the Mg-air battery with Mg-Al-Pb-In anode is 94.5 mW cm −2 , which is comparable with those of Mg-H 2 O 2 semi-fuel batteries. Moreover, the activation mechanism of Mg-Al-Pb-In alloy during the discharge process is also analyzed

  3. Prognostic significance of MYC, BCL2, and BCL6 rearrangements in patients with diffuse large B-cell lymphoma treated with cyclophosphamide, doxorubicin, vincristine, and prednisone plus rituximab.

    Science.gov (United States)

    Akyurek, Nalan; Uner, Aysegul; Benekli, Mustafa; Barista, Ibrahim

    2012-09-01

    Diffuse large B-cell lymphomas (DLBCLs) are a biologically heterogeneous group in which various gene alterations have been reported. The aim of this study was to investigate the frequency and prognostic impact of BCL2, BCL6, and MYC rearrangements in cyclophosphamide, doxorubicin, vincristine, and prednisone plus rituximab (R-CHOP)-treated DLBCL cases. Tissue microarrays were constructed from 239 cases of DLBCL, and the expressions of CD10, BCL6, MUM1/IRF4, and BCL2 were evaluated by immunohistochemistry. MYC, BCL2, and BCL6 rearrangements were investigated by interphase fluorescence in situ hybridization on tissue microarrays. Survival analysis was constructed from 145 R-CHOP-treated patients. MYC, BCL2, and BCL6 rearrangements were detected in 14 (6%), 36 (15%), and 69 (29%) of 239 DLBCL patients. Double or triple rearrangements were detected in 7 (3%) of 239 DLBCL cases. Of these, 4 had BCL2 and MYC, 2 had BCL6 and MYC, and 1 had BCL2, BCL6, and MYC rearrangements. The prognosis of these cases was extremely poor, with a median survival of 9 months. MYC rearrangement was associated with significantly worse overall survival (P = .01), especially for the cases with GC phenotype (P = .009). BCL6 rearrangement also predicted significantly shorter overall survival (P = .04), especially for the non-GC phenotype (P = .03). BCL2 rearrangement had no prognostic impact on outcome. International Prognostic Index (P = .004) and MYC rearrangement (P = .009) were independent poor prognostic factors. Analysis of MYC gene rearrangement along with BCL2 and BCL6 is critical in identifying high-risk patients with poor prognosis. Copyright © 2011 American Cancer Society.

  4. Effects of limestone, N, K and Mg fertilizers on Mg absorption by oats and barley

    Energy Technology Data Exchange (ETDEWEB)

    Alston, A M

    1966-01-01

    Oats grown in a pot experiment on two sandy loams were sampled at four stages of growth. Neither KCl nor MgSO/sub 4/. 7H/sub 2/O had any effect on yield but % Mg and total Mg uptake were consistently decreased by applying K and increased by applying Mg. Ca(NO/sub 3/)/sub 2/ increased % Mg more than did (NH/sub 4/)/sub 2/SO/sub 4/, but yield and total Mg uptake were higher where (NH/sub 4/)/sub 2/SO/sub 4/ was applied. The effects of fertilizers were similar on both soils. The effects of applying (NH/sub 4/)/sub 2/SO/sub 4/ and NaNO/sub 2/ to the soil on % Mg in barley were compared in a field experiment on an acid loam to which several rates of limestone had been applied. Treatments had no effect on the % Mg in grain or straw at maturity. At four earlier stages of growth (NH/sub 4/)/sub 2/SO)/sub 4/ increased % Mg in the plants more than did NaNO/sub 2/. Limestone slightly increased % Mg. Nitrification of NH/sub 4/ in the soil was rapid.

  5. Structural characteristics and corrosion behavior of biodegradable Mg-Zn, Mg-Zn-Gd alloys.

    Science.gov (United States)

    Kubásek, J; Vojtěch, D

    2013-07-01

    In this research, binary Mg-Zn (up to 3 wt% Zn) and ternary Mg-Zn-Gd (up to 3 wt% Gd, 3 wt% Zn) alloys were prepared by induction melting in an argon atmosphere. The structures of these alloys were characterized using light and scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction and X-ray fluorescence. In addition, Brinell hardness measurements were taken to supplement these studies. Corrosion behavior was evaluated by immersion tests and potentiodynamic measurements in a physiological solution (9 g/l NaCl). Depending on the composition, structures of the as-cast alloys contained α-Mg dendrites, MgZn, Mg5Gd and Mg3Gd2Zn3 phases. Compared to pure Mg, zinc improved the corrosion resistance of binary Mg-Zn. Gadolinium also improved the corrosion resistance in the case of Mg-1Zn-3Gd alloy. The highest corrosion rate was observed for Mg-3Zn-3Gd alloy. Our results improve the understanding of the relationships between the structure and corrosion behavior of our studied alloy systems.

  6. Mg2BIV: Narrow Bandgap Thermoelectric Semiconductors

    Science.gov (United States)

    Kim, Il-Ho

    2018-05-01

    Thermoelectric materials can convert thermal energy directly into electric energy and vice versa. The electricity generation from waste heat via thermoelectric devices can be considered as a new energy source. For instance, automotive exhaust gas and all industrial processes generate an enormous amount of waste heat that can be converted to electricity by using thermoelectric devices. Magnesium compound Mg2BIV (BIV = Si, Ge or Sn) has a favorable combination of physical and chemical properties and can be a good base for the development of new efficient thermoelectrics. Because they possess similar properties to those of group BIV elemental semiconductors, they have been recognized as good candidates for thermoelectric applications. Mg2Si, Mg2Ge and Mg2Sn with an antifluorite structure are narrow bandgap semiconductors with indirect band gaps of 0.77 eV, 0.74 eV, and 0.35 eV, respectively. Mg2BIV has been recognized as a promising material for thermoelectric energy conversion at temperatures ranging from 500 K to 800 K. Compared to other thermoelectric materials operating in the similar temperature range, such as PbTe and filled skutterudites, the important aspects of Mg2BIV are non-toxic and earth-abundant elements. Based on classical thermoelectric theory, the material factor β ( m* / m e)3/2μκ L -1 can be utilized as the criterion for thermoelectric material selection, where m* is the density-of-states effective mass, me is the mass of an electron, μ is the carrier mobility, and κL is the lattice thermal conductivity. The β for magnesium silicides is 14, which is very high compared to 0.8 for iron silicides, 1.4 for manganese silicides, and 2.6 for silicon-germanium alloys. In this paper, basic phenomena of thermoelectricity and transport parameters for thermoelectric materials were briefly introduced, and thermoelectric properties of Mg2BIV synthesized by using a solid-state reaction were reviewed. In addition, various Mg2BIV compounds were discussed

  7. Quasicrystal-reinforced Mg alloys.

    Science.gov (United States)

    Kyun Kim, Young; Tae Kim, Won; Hyang Kim, Do

    2014-04-01

    The formation of the icosahedral phase (I-phase) as a secondary solidification phase in Mg-Zn-Y and Mg-Zn-Al base systems provides useful advantages in designing high performance wrought magnesium alloys. The strengthening in two-phase composites (I-phase + α -Mg) can be explained by dispersion hardening due to the presence of I-phase particles and by the strong bonding property at the I-phase/matrix interface. The presence of an additional secondary solidification phase can further enhance formability and mechanical properties. In Mg-Zn-Y alloys, the co-presence of I and Ca 2 Mg 6 Zn 3 phases by addition of Ca can significantly enhance formability, while in Mg-Zn-Al alloys, the co-presence of the I-phase and Mg 2 Sn phase leads to the enhancement of mechanical properties. Dynamic and static recrystallization are significantly accelerated by addition of Ca in Mg-Zn-Y alloy, resulting in much smaller grain size and more random texture. The high strength of Mg-Zn-Al-Sn alloys is attributed to the presence of finely distributed Mg 2 Sn and I-phase particles embedded in the α -Mg matrix.

  8. A Comparative Study of the Effect of MgO and CaCO3 as Support Materials in the Synthesis of Carbon Nanotubes with Fe/Co as Catalyst

    Directory of Open Access Journals (Sweden)

    Ezekiel D. Dikio

    2014-01-01

    Full Text Available A comparative study of the effect of magnesium oxide and calcium carbonate as support material in the synthesis of carbon nanotubes using the catalyst Fe/Co is presented. The synthesized carbon nanotubes were characterized with Raman spectroscopy, scanning electron spectroscopy (SEM, high-resolution transmission electron microscopy (HRTEM, X-ray diffraction spectroscopy (XRD, and energy dispersive spectroscopy (EDS. The morphology of the carbon nanotubes synthesized with magnesium oxide as support material gives rise to carbon nanotubes with consistent and well-defined structure unlike that synthesized with calcium carbonate. The ID/IG ratio of synthesized carbon nanotubes (CNTs was 0.8544 for magnesium oxide supported compared to 0.8501 for calcium carbonate supported carbon nanotube.

  9. Mg-Ca Alloys Produced by Reduction of CaO: Understanding of ECO-Mg Alloy Production

    Science.gov (United States)

    Jung, In-Ho; Lee, Jin Kyu; Kim, Shae K.

    2017-04-01

    There have been long debates about the environment conscious (ECO) Mg technology which utilizes CaO to produce Ca-containing Mg alloys. Two key process technologies of the ECO-Mg process are the chemical reduction of CaO by liquid Mg and the maintenance of melt cleanliness during the alloying of Ca. Thermodynamic calculations using FactSage software were performed to explain these two key issues. In addition, an experimental study was performed to compare the melt cleanliness of the Ca-containing Mg alloys produced by the conventional route with metallic Ca and the ECO-Mg route with CaO.

  10. Prussian Blue Mg-Li Hybrid Batteries.

    Science.gov (United States)

    Sun, Xiaoqi; Duffort, Victor; Nazar, Linda F

    2016-08-01

    The major advantage of Mg batteries relies on their promise of employing an Mg metal negative electrode, which offers much higher energy density compared to graphitic carbon. However, the strong coulombic interaction of Mg 2+ ions with anions leads to their sluggish diffusion in the solid state, which along with a high desolvation energy, hinders the development of positive electrode materials. To circumvent this limitation, Mg metal negative electrodes can be used in hybrid systems by coupling an Li + insertion cathode through a dual salt electrolyte. Two "high voltage" Prussian blue analogues (average 2.3 V vs Mg/Mg 2+ ; 3.0 V vs Li/Li + ) are investigated as cathode materials and the influence of structural water is shown. Their electrochemical profiles, presenting two voltage plateaus, are explained based on the two unique Fe bonding environments. Structural water has a beneficial impact on the cell voltage. Capacities of 125 mAh g -1 are obtained at a current density of 10 mA g -1 (≈C/10), while stable performance up to 300 cycles is demonstrated at 200 mA g -1 (≈2C). The hybrid cell design is a step toward building a safe and high density energy storage system.

  11. The Influence of MgH2 on the Assessment of Electrochemical Data to Predict the Degradation Rate of Mg and Mg Alloys

    Directory of Open Access Journals (Sweden)

    Wolf-Dieter Mueller

    2014-06-01

    Full Text Available Mg and Mg alloys are becoming more and more of interest for several applications. In the case of biomaterial applications, a special interest exists due to the fact that a predictable degradation should be given. Various investigations were made to characterize and predict the corrosion behavior in vitro and in vivo. Mostly, the simple oxidation of Mg to Mg2+ ions connected with adequate hydrogen development is assumed, and the negative difference effect (NDE is attributed to various mechanisms and electrochemical results. The aim of this paper is to compare the different views on the corrosion pathway of Mg or Mg alloys and to present a neglected pathway based on thermodynamic data as a guideline for possible reactions combined with experimental observations of a delay of visible hydrogen evolution during cyclic voltammetry. Various reaction pathways are considered and discussed to explain these results, like the stability of the Mg+ intermediate state, the stability of MgH2 and the role of hydrogen overpotential. Finally, the impact of MgH2 formation is shown as an appropriate base for the prediction of the degradation behavior and calculation of the corrosion rate of Mg and Mg alloys.

  12. Myasthenia Gravis (MG): Medical Management

    Science.gov (United States)

    ... take effect, prior to surgery or for myasthenic crisis. However, some people receive regular plasmapheresis or IVIg as a supplement to immunosuppressant drugs. Pregnancy In rare cases, pregnancy appears to trigger the onset of MG. ...

  13. Structural and electronic properties of Mg and Mg-Nb co-doped TiO2 (101) anatase surface

    International Nuclear Information System (INIS)

    Sasani, Alireza; Baktash, Ardeshir; Mirabbaszadeh, Kavoos; Khoshnevisan, Bahram

    2016-01-01

    Highlights: • Formation energy of Mg and Mg-Nb co-doped TiO_2 anatase surface (101) is studied. • Effect of Mg defect to the TiO_2 anatase (101) surface and bond length distribution of the surface is studied and it is shown that Mg defects tend to stay far from each other. • Effect of Mg and Nb to the bond length distribution of the surface studied and it is shown that these defects tend to stay close to each other. • Effects of Mg and Mg-Nb defects on DSSCs using TiO_2 anatase hosting these defects are studied. - Abstract: In this paper, by using density functional theory, Mg and Nb-Mg co-doping of TiO_2 anatase (101) surfaces are studied. By studying the formation energy of the defects and the bond length distribution of the surface, it is shown that Mg defects tend to stay as far as possible to induce least possible lattice distortion while Nb and Mg defects stay close to each other to cause less stress to the surface. By investigating band structure of the surface and changes stemmed from the defects, potential effects of Mg and Mg-Nb co-doping of TiO_2 surface on dye-sensitized solar cells are investigated. In this study, it is shown that the Nb-Mg co-doping could increase J_S_C of the surface while slightly decreasing V_O_C compared to Mg doped surface, which might result in an increase in efficiency of the DSSCs compared to Nb or Mg doped surfaces.

  14. Structural and electronic properties of Mg and Mg-Nb co-doped TiO2 (101) anatase surface

    Energy Technology Data Exchange (ETDEWEB)

    Sasani, Alireza [Department of Science, Karaj Islamic Azad University, Karaj, Alborz, P.O. Box 31485-313 (Iran, Islamic Republic of); Baktash, Ardeshir [Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P.O. Box 87317-51167 (Iran, Islamic Republic of); Mirabbaszadeh, Kavoos, E-mail: mirabbas@aut.ac.ir [Department of Energy Engineering and Physics, Amirkabir University of Technology, Tehran, P. O. Box 15875-4413 (Iran, Islamic Republic of); Khoshnevisan, Bahram [Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P.O. Box 87317-51167 (Iran, Islamic Republic of)

    2016-10-30

    Highlights: • Formation energy of Mg and Mg-Nb co-doped TiO{sub 2} anatase surface (101) is studied. • Effect of Mg defect to the TiO{sub 2} anatase (101) surface and bond length distribution of the surface is studied and it is shown that Mg defects tend to stay far from each other. • Effect of Mg and Nb to the bond length distribution of the surface studied and it is shown that these defects tend to stay close to each other. • Effects of Mg and Mg-Nb defects on DSSCs using TiO{sub 2} anatase hosting these defects are studied. - Abstract: In this paper, by using density functional theory, Mg and Nb-Mg co-doping of TiO{sub 2} anatase (101) surfaces are studied. By studying the formation energy of the defects and the bond length distribution of the surface, it is shown that Mg defects tend to stay as far as possible to induce least possible lattice distortion while Nb and Mg defects stay close to each other to cause less stress to the surface. By investigating band structure of the surface and changes stemmed from the defects, potential effects of Mg and Mg-Nb co-doping of TiO{sub 2} surface on dye-sensitized solar cells are investigated. In this study, it is shown that the Nb-Mg co-doping could increase J{sub SC} of the surface while slightly decreasing V{sub OC} compared to Mg doped surface, which might result in an increase in efficiency of the DSSCs compared to Nb or Mg doped surfaces.

  15. Infliximab effects compared to conventional therapy in the management of retinal vasculitis in Behçet disease.

    Science.gov (United States)

    Tabbara, Khalid F; Al-Hemidan, Amal I

    2008-12-01

    To assess the outcome of retinal vasculitis in patients with Behçet disease treated with infliximab compared to treatment with conventional therapy. Nonrandomized, retrospective comparative clinical study. Patients with Behçet disease with all four major criteria were included in this study. Patients had recurrent episodes of uveitis and retinal vasculitis. Thirty-three patients (Group 1) were treated with oral prednisone, cyclosporine, and azathioprine or methotrexate for a minimum period of three months. Ten patients (Group 2) who failed to respond to conventional therapy were given infliximab at a dose of 5 mg/kg in a single intravenous infusion on day 1 and every two weeks for a total of six doses. Patients were given the same treatment during each subsequent relapse. The main outcome measures were the number of relapses, visual outcome, and ocular complications. The mean follow-up period was 36 months in Group 1 and 30 months in Group 2. The mean number of relapses was significantly reduced and the duration of remission was longer in the infliximab therapy group compared to conventional therapy group (P < .0001). The visual acuity at 24 months follow-up was significantly better in patients treated with infliximab (Group 2) when compared to conventional therapy (Group 1) (P = .0059). Patients with Behçet disease had significant decrease in inflammation, improvement of visual acuity, and reduced ocular complications following infliximab when compared to conventional therapy. The number of relapses was less in the infliximab treatment group than the conventional therapy group.

  16. Applications of thermodynamic calculations to Mg alloy design: Mg-Sn based alloy development

    International Nuclear Information System (INIS)

    Jung, In-Ho; Park, Woo-Jin; Ahn, Sang Ho; Kang, Dae Hoon; Kim, Nack J.

    2007-01-01

    Recently an Mg-Sn based alloy system has been investigated actively in order to develop new magnesium alloys which have a stable structure and good mechanical properties at high temperatures. Thermodynamic modeling of the Mg-Al-Mn-Sb-Si-Sn-Zn system was performed based on available thermodynamic, phase equilibria and phase diagram data. Using the optimized database, the phase relationships of the Mg-Sn-Al-Zn alloys with additions of Si and Sb were calculated and compared with their experimental microstructures. It is shown that the calculated results are in good agreement with experimental microstructures, which proves the applicability of thermodynamic calculations for new Mg alloy design. All calculations were performed using FactSage thermochemical software. (orig.)

  17. Electronic structure of ferromagnet-insulator interfaces: Fe/MgO and Co/MgO

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, M.

    2007-07-11

    In this thesis the electronic structure of Fe/MgO{sub x} and Co/MgO{sub x} ferromagnet-insulator interfaces, representing material systems which are widely used in magnetic tunnel junctions, is studied by means of spin- and angle-resolved photoemission spectroscopy. The photoemission studies focus particularly on the response of the ferromagnetic electronic system in contact with MgO of varying stoichiometries, as this reflects the mechanisms of metal-oxide bonding at real ferromagnet-insulator interfaces. The correlation between chemical bonding and electronic structure formation is analyzed by combining information from core- and valence-band photoemission spectroscopy. The spectral features are compared to band structure calculations, which are performed using the SPR-KKR method. The Fe/MgO and Co/MgO systems are prepared by molecular beam epitaxy under ultrahigh vacuum conditions on well-defined (4 x 6) GaAs(001) substrates. A structural analysis by means of low-energy electron diffraction (LEED) reveals their body-centered cubic crystalline structure, whereas the chemical characterization by Auger electron spectroscopy is used to quantify the chemical environment at the sample surfaces. The magnetic analysis, using the magneto-optical Kerr effect, reveals the uniaxial anisotropy of the ferromagnetic layers. A crucial parameter is given by the MgO degree of oxidation, which is addressed by means of core-level spectroscopy and quantified by suitable fitting procedures of the Mg 2p core level. The results of the photoemission experiments show, that the electronic structure of the Fe/MgO and Co/MgO ferromagnet/insulator interfaces and, consequently, the interfacial spin polarization are sensitively controlled by the interface chemistry. In particular, three distinct scenarios are identified: the nearly stoichiometric, the oxygen-deficient and the over-oxidized ferromagnet/MgO interface. Each case is defined by innate characteristics of the electronic structure at

  18. Real-world comparative risks of herpes virus infections in tofacitinib and biologic-treated patients with rheumatoid arthritis.

    Science.gov (United States)

    Curtis, Jeffrey R; Xie, Fenglong; Yun, Huifeng; Bernatsky, Sasha; Winthrop, Kevin L

    2016-10-01

    To evaluate the risks of herpes zoster (HZ) and herpes simplex virus (HSV) infection associated with tofacitinib compared with biologic agents among patients with rheumatoid arthritis (RA). Using health plan data from 2010 to 2014, patients with RA initiating tofacitinib or biologics with no history of HZ or HSV were identified, as were incident cases of HZ or HSV. Crude incidence rates were calculated by drug exposure. Cox proportional hazards models evaluated the adjusted association between tofacitinib and HZ, and a composite outcome of HZ or HSV. A total of 2526 patients initiating tofacitinib were compared with initiations of other biologics: anti-tumour necrosis factor (TNF) (n=42 850), abatacept (n=12 305), rituximab (n=5078) and tocilizumab (n=6967). Patients receiving tofacitinib were somewhat younger (mean age 55 years) versus those on other biologics, and somewhat less likely to use concomitant methotrexate (MTX) (39% vs 43%-56%, depending on drug). Crude incidence of HZ associated with tofacitinib was 3.87/100 patient-years (py). After multivariable adjustment, HZ risk was significantly elevated, HR 2.01 (95% CI 1.40 to 2.88) compared with abatacept. Rates and adjusted HRs for all other RA biologics were comparable with each other and abatacept. Older age, female sex, prednisone >7.5 mg/day, prior outpatient infection and greater number of hospitalisations were also associated with increased HZ risk. Incidence rates for the combined outcome were greatest for tofacitinib (7.61/100 py) and also significantly elevated after adjustment (HR=1.40, 95% CI 1.09 to 1.81). The rate of zoster associated with tofacitinib was approximately double that observed in patients using biologics. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  19. Corrosion behavior of Mg/graphene composite in aqueous electrolyte

    International Nuclear Information System (INIS)

    Selvam, M.; Saminathan, K.; Siva, P.; Saha, P.; Rajendran, V.

    2016-01-01

    In the present work, the electrochemical corrosion behavior of magnesium (Mg) and thin layer graphene coated Mg (Mg/graphene) are studied in different salt electrolyte such as NaCl, KCl and Na_2SO_4. The phase structure, crystallinity, and surface morphology of the samples are investigated using X-ray diffraction (XRD) analysis, scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM/EDAX), and Raman spectroscopy techniques. The electrochemical corrosion behavior of the Mg and graphene coated Mg are also investigated using Electrochemical Impedance Spectroscopy (EIS) analysis. The tafel plot reveals that the corrosion of Mg drastically drops when coated with thin layer graphene (Mg/graphene) compared to Mg in KCl electrolyte. Moreover, the EIS confirms that Mg/graphene sample shows improve corrosion resistance and lower corrosion rate in KCl solution compare to all other electrolytes studied in the present system. - Highlights: • The corrosion behavior of magnesium alloy (AZ91) was investigated in three different electrolyte solution. • To study the anti-corrosion behavior of graphene coated with magnesium alloy. • To improve the corrosion resistance for magnesium alloy. • Nyquist plots confirms that MgG shows better corrosion resistance and lower corrosion rate in KCl solution.

  20. Corrosion behavior of Mg/graphene composite in aqueous electrolyte

    Energy Technology Data Exchange (ETDEWEB)

    Selvam, M. [Centre for Nano Science and Technology, KS Rangasamy College of Technology, Tiruchengode, 637215, Tamil Nadu (India); Saminathan, K., E-mail: ksaminath@gmail.com [Centre for Nano Science and Technology, KS Rangasamy College of Technology, Tiruchengode, 637215, Tamil Nadu (India); Siva, P. [Centre for Nano Science and Technology, KS Rangasamy College of Technology, Tiruchengode, 637215, Tamil Nadu (India); Saha, P. [Department of Ceramic Engineering, National Institute of Technology, Rourkela, India-769008 (India); Rajendran, V. [Centre for Nano Science and Technology, KS Rangasamy College of Technology, Tiruchengode, 637215, Tamil Nadu (India)

    2016-04-01

    In the present work, the electrochemical corrosion behavior of magnesium (Mg) and thin layer graphene coated Mg (Mg/graphene) are studied in different salt electrolyte such as NaCl, KCl and Na{sub 2}SO{sub 4}. The phase structure, crystallinity, and surface morphology of the samples are investigated using X-ray diffraction (XRD) analysis, scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM/EDAX), and Raman spectroscopy techniques. The electrochemical corrosion behavior of the Mg and graphene coated Mg are also investigated using Electrochemical Impedance Spectroscopy (EIS) analysis. The tafel plot reveals that the corrosion of Mg drastically drops when coated with thin layer graphene (Mg/graphene) compared to Mg in KCl electrolyte. Moreover, the EIS confirms that Mg/graphene sample shows improve corrosion resistance and lower corrosion rate in KCl solution compare to all other electrolytes studied in the present system. - Highlights: • The corrosion behavior of magnesium alloy (AZ91) was investigated in three different electrolyte solution. • To study the anti-corrosion behavior of graphene coated with magnesium alloy. • To improve the corrosion resistance for magnesium alloy. • Nyquist plots confirms that MgG shows better corrosion resistance and lower corrosion rate in KCl solution.

  1. Phase formation in Mg-Sn-Si and Mg-Sn-Si-Ca alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kozlov, A.; Groebner, J. [Institute of Metallurgy, Clausthal University of Technology, Robert-Koch-Str. 42, D-38678 Clausthal-Zellerfeld (Germany); Schmid-Fetzer, R., E-mail: schmid-fetzer@tu-clausthal.de [Institute of Metallurgy, Clausthal University of Technology, Robert-Koch-Str. 42, D-38678 Clausthal-Zellerfeld (Germany)

    2011-02-17

    Research highlights: > The solidification paths of ternary and quaternary alloys are analyzed in detail, using the tool of thermodynamic calculations. > The precipitation sequence of phases and their amounts compare well with the microstructure of alloys. > The most efficient comparison to the experimental thermal analysis data is done by calculation of the enthalpy variation with temperature. > The viability of a procedure for the selection of multicomponent key samples is demonstrated for the development of the Mg-Ca-Si-Sn phase diagram. - Abstract: Experimental work is done and combined with the Calphad method to generate a consistent thermodynamic description of the Mg-Ca-Si-Sn quaternary system, validated for Mg-rich alloys. The viability of a procedure for the selection of multicomponent key samples is demonstrated for this multicomponent system. Dedicated thermal analysis with DTA/DSC on sealed samples is performed and the microstructure of slowly solidified alloys is analyzed using SEM/EDX. The thermodynamic description and phase diagram of the ternary Mg-Si-Sn system, developed in detail also in this work, deviates significantly from a previous literature proposal. The phase formation in ternary and quaternary alloys is analyzed using the tool of thermodynamic equilibrium and Scheil calculations for the solidification paths and compared with present experimental data. The significant ternary/quaternary solid solubilities of pertinent intermetallic phases are quantitatively introduced in the quaternary Mg-Ca-Si-Sn phase diagram and validated by experimental data.

  2. Single crystal structures of the new vanadates CuMgVO{sub 4} and AgMgVO{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Ben Yahia, Hamdi, E-mail: Hyahia@qf.org.qa [Research Institute of Electrochemical Energy, National Institute of Advanced Industrial Science and Technology (AIST), 1-8-31 Midorigaoka, Ikeda, Osaka 563-8577 (Japan); Qatar Environment and Energy Research Institute, Hamad Bin Khalifa University, Qatar Foundation, PO Box 5825, Doha (Qatar); Shikano, Masahiro, E-mail: shikano.masahiro@aist.go.jp [Research Institute of Electrochemical Energy, National Institute of Advanced Industrial Science and Technology (AIST), 1-8-31 Midorigaoka, Ikeda, Osaka 563-8577 (Japan); Essehli, Rachid; Belharouak, Ilias [Qatar Environment and Energy Research Institute, Hamad Bin Khalifa University, Qatar Foundation, PO Box 5825, Doha (Qatar)

    2016-08-01

    The new compounds CuMgVO{sub 4} and AgMgVO{sub 4} have been synthesized by a solid state reaction route. Their crystal structures were determined from single-crystal X-ray diffraction data. CuMgVO{sub 4} crystallizes with Na{sub 2}CrO{sub 4}-type structure with space group Cmcm, a = 5.6932 (10), b = 8.7055 (15), c = 6.2789 (10) Å, V = 311.20 (9) Å{sup 3}, and Z = 4, whereas AgMgVO{sub 4} crystallizes in the maricite-type structure with space group Pnma, a = 9.4286 (14), b = 6.7465 (10), c = 5.3360 (8) Å, V = 339.42 (9) Å{sup 3}, and Z = 4. Both structures of CuMgVO{sub 4}, and AgMgVO{sub 4} contain MgO{sub 4} chains made up of edge-sharing MgO{sub 6} octahedra. In CuMgVO{sub 4} the MgO{sub 4} chains are interconnected through CuVO{sub 4} double chains made up of VO{sub 4} and CuO{sub 4} tetrahedra sharing corners and edges, however in AgMgVO{sub 4} the chains are interlinked by the VO{sub 4} and AgO{sub 4} tetrahedra sharing only corners. - Highlights: • We have been able to grow CuMgVO{sub 4} and AgMgVO{sub 4} single crystals. • We solved their crystal structures using single crystal data. • We compared the crystal structures of CuMgVO{sub 4} and AgMgVO{sub 4}.

  3. Enhanced voltage-controlled magnetic anisotropy in magnetic tunnel junctions with an MgO/PZT/MgO tunnel barrier

    Science.gov (United States)

    Chien, Diana; Li, Xiang; Wong, Kin; Zurbuchen, Mark A.; Robbennolt, Shauna; Yu, Guoqiang; Tolbert, Sarah; Kioussis, Nicholas; Khalili Amiri, Pedram; Wang, Kang L.; Chang, Jane P.

    2016-03-01

    Compared with current-controlled magnetization switching in a perpendicular magnetic tunnel junction (MTJ), electric field- or voltage-induced magnetization switching reduces the writing energy of the memory cell, which also results in increased memory density. In this work, an ultra-thin PZT film with high dielectric constant was integrated into the tunneling oxide layer to enhance the voltage-controlled magnetic anisotropy (VCMA) effect. The growth of MTJ stacks with an MgO/PZT/MgO tunnel barrier was performed using a combination of sputtering and atomic layer deposition techniques. The fabricated MTJs with the MgO/PZT/MgO barrier demonstrate a VCMA coefficient, which is ˜40% higher (19.8 ± 1.3 fJ/V m) than the control sample MTJs with an MgO barrier (14.3 ± 2.7 fJ/V m). The MTJs with the MgO/PZT/MgO barrier also possess a sizeable tunneling magnetoresistance (TMR) of more than 50% at room temperature, comparable to the control MTJs with an MgO barrier. The TMR and enhanced VCMA effect demonstrated simultaneously in this work make the MgO/PZT/MgO barrier-based MTJs potential candidates for future voltage-controlled, ultralow-power, and high-density magnetic random access memory devices.

  4. High temperature mechanical forming of Mg alloys

    International Nuclear Information System (INIS)

    Mwembela, A.; McQueen, H.J.; Myshlyaev, M.

    2002-01-01

    Mg alloys are hot worked in the range 180-450 o C and 0.0-10 s -1 ; the present project data are compared with a wide selection of published results. The flow stresses and their dependence on temperature and strain rate are fairly similar to simple Al alloys: however, the hot ductility is much lower (≤3 in torsion). Twinning plays a significant role in Mg alloys almost independently of temperature; the twins initiate at low strains in grains poorly oriented for basal slip and in consequence become well disposed for such slip. As T rises, there is increasing formation of subgrains that spread toward the grain centers from grain and twin boundaries: this is indicative of stress concentrations inducing non-basal sup which helps provide the geometrically necessary dislocations. Above about 240 o C, dynamic (DRX) nucleates at grain and twin boundaries, preferentially at intersections; this again is evidence of non-basal slip that provides the highly misoriented cells. The boundaries in which further strain concentrates producing further DRX. The microstructure remains very heterogeneous compared to the uniform dynamically recovered substructure in Al alloys, thus giving rise to the reduced ductility. These results are employed to interpret the mechanical and microstructural behavior of Mg alloys in extrusion, rolling and forging. (author)

  5. Projectile deformation effects in the breakup of 37Mg

    Directory of Open Access Journals (Sweden)

    Shubhchintak

    2016-01-01

    Full Text Available We study the breakup of 37Mg on Pb at 244MeV/u with the recently developed extended theory of Coulomb breakup within the postform finite range distorted wave Born approximation that includes deformation of the projectile. Comparing our calculated cross section with the available Coulomb breakup data we determine the possible ground state configuration of 37Mg.

  6. Análise comparativa das características da serrapilheira e do solo em cafezais (Coffea arabica L. cultivados em sistema agroflorestal e em monocultura, na Zona da Mata MG Comparative analysis of litter and soil characteristics under coffee (Coffea arabica L. crop in agroforestry and monoculture systems

    Directory of Open Access Journals (Sweden)

    Mônica Matoso Campanha

    2007-10-01

    Full Text Available O aporte de serrapilheira em sistemas agroflorestais pode melhorar as características químicas e físicas do solo, diminuir a erosão e permitir a manutenção da umidade no solo por mais tempo. Isso faz dele um sistema alternativo de produção de café em regiões com solos propensos à degradação. Este trabalho teve como objetivo realizar uma análise comparativa da quantidade e teor de nutrientes da serrapilheira e das características de fertilidade e do teor de umidade dos solos, em cafeeiros cultivados sob sistemas agroflorestal e solteiro. A pesquisa foi realizada na Zona da Mata mineira, durante o período compreendido entre janeiro de 1999 e maio de 2000. O sistema agroflorestal contribuiu com 6,1 Mg ha-1 ano-1 de matéria seca de serrapilheira, no entanto o solteiro aportou 4,5 Mg ha-1 ano-1, ressaltando-se que esta última apresentou teor mais elevado de macronutrientes. O solo do sistema agroflorestal exibiu maior teor de umidade de 20-40 cm, maior capacidade de troca de cátions e soma de bases trocáveis, maior teor de K, Ca, Mg, Cu e Zn em ambos os horizontes do solo e menor índice de saturação de alumínio e alumínio trocável na camada mais profunda do que o solo sob a monocultura. No cultivo solteiro, o solo apresentou maior teor de P e de matéria orgânica, tanto na camada superficial quanto na profunda.Coffee plants in agroforestry systems is an alternative to full sunlight cultivation, presenting the potential benefits of enhancing soil chemical and physical characteristics, reducing soil erosion, besides maintaining soil moisture for longer periods. This research aimed at comparing the quantity and nutrient concentration in the litter, soil fertility and soil moisture in coffee crops under full sunlight monocrop and in agroforestry systems, at the Zona da Mata, Minas Gerais, Brazil. The research was carried out between January 1999 and May 2000. The agroforestry system, contributed with 6.1 Mg ha-1 year-1 of

  7. Adsorption of arginine, glycine and aspartic acid on Mg and Mg-based alloy surfaces: A first-principles study

    Science.gov (United States)

    Fang, Zhe; Wang, Jianfeng; Yang, Xiaofan; Sun, Qiang; Jia, Yu; Liu, Hairong; Xi, Tingfei; Guan, Shaokang

    2017-07-01

    Studying the adsorption behaviors of biomolecules on the surface of Mg and Mg-based alloy has a fundamental and important role for related applications in biotechnology. In the present work, we systematically investigate and compare the adsorption properties of three typical amino acids, i.e., Arg (arginine), Gly (glycine) and Asp (aspartic acid), which form RGD tripeptide, on the Mg (0 0 0 1) surface with various doping (Zn, Y, and Nd), and aim to realize proper binding between biomolecules and Mg and Mg-based biomedical materials. Our results show that flat adsorption configurations of the functional groups binding to the surfaces are favored in energy for all the three selected amino acids. In specific, for the amino acids adsorped on clean Mg (0 0 0 1) surface, the adsorption energy (Eads) of Arg is found to be -1.67 eV for the most stable configuration, with amino and guanidyl groups binding with the surface. However, Gly (Asp) is found to binding with the surface through amino and carboxyl groups, with a -1.16 eV (-1.15 eV) binding energy. On the 2% Zn doped Mg (0 0 0 1) alloy surface (Mg-Zn (2%)), the Eads are significantly increased to be -1.91 eV, -1.32 eV and -1.35 eV for Arg, Gly and Asp, respectively. While the Mg-Y (1%) and Mg-Nd (1%) slightly weaken the adsorption of three amino acids. Moreover, we have performed detail discussions of the binding properties between amino acids and surfaces by projected density of states (PDOS) combined with charge transfer analyses. Our studies provide a comprehensive understanding on the interactions between amino acids and Mg and Mg-based alloy surfaces, with respect to facilitate the applications of Mg and Mg-based biomedical alloys in biosensing, drug delivery, biomolecule coating and other fields in biotechnology.

  8. Efficacy of 5MG and 10MG rosuvastatin in type-2 diabetes mellitus with hypercholesteroalemia

    International Nuclear Information System (INIS)

    Ullah, F.; Rahim, F.; Rahman, S.U.; Ashfaq, M.; Afridi, A.K.

    2015-01-01

    Background: Coronary Heart Disease (CHD) is the most important complication and the leading cause of death in patients with type 2 diabetes mellitus (T2DM). Hypercholesterolemia is an important modifiable risk factor for CHD. Statins are the first line drugs for the treatment of hypercholesterolemia in DM. Comparative studies between different statins are available but different doses of the same statin have not been compared in our population. The objective of this study is to compare mean reduction in serum LDL-C level after using 5mg and 10mg of rosuvastatin among T2DM patients with hypercholesterolemia. This study will help finding lowest effective dose of rosuvastatin to achieve internationally set low density lipoprotein cholesterol (LDL-C) goals. Method: A total of 82 patients with T2DM having fasting LDL-C levels equal or more than 100mg/dl were randomly allocated into two groups with 41 patients in each group. Baseline fasting serum LCL-C levels were obtained in all patients. Group A received 5mg while group B received 10mg of rosuvastatin daily at night. After 6 weeks, fasting LDL-C levels were obtained and analysed to compare the mean±SD reduction of LDL-C levels in both groups. Results: Baseline mean±SD LDL-C levels in group A and group B were 134.12±30.02 and 143.49±32.01 respectively (p 0.176). Follow up mean ± SD LDL-C levels were 81.59±28.47 and 83.24±36.06 respectively (p 0.818). Mean ± SD reduction in LDL-C levels from baseline levels in group A and group B were 52.51±19.49 and 60.20±24.09 (p 0.116). Conclusion: Rosuvastatin 5mg is as effective as 10mg in reducing the LDL-C levels in type 2 diabetic patients with hypercholesterolemia. (author)

  9. Comparison of initial loading doses of 5 mg and 10 mg for warfarin therapy

    Directory of Open Access Journals (Sweden)

    Sidnei Lastória

    2014-03-01

    Full Text Available CONTEXT: The question of what is the best loading dosage of warfarin when starting anticoagulant treatment has been under discussion for ten years. We were unable to find any comparative studies of these characteristics conducted here in Brazil. OBJECTIVE: To compare the safety and efficacy of two initial warfarin dosage regimens for anticoagulant treatment. METHODS: One-hundred and ten consecutive patients of both sexes, with indications for anticoagulation because of venous or arterial thromboembolism, were analyzed prospectively. During the first 3 days of treatment, these patients were given adequate heparin to keep aPTT (activated partial thromboplastin time between 1.5 and 2.5, plus 5 mg of warfarin. From the fourth day onwards, their warfarin doses were adjusted using International Normalized Ratios (INR; target range: 2 to 3. This prospective cohort was compared with a historical series of 110 patients had been given 10 mg of warfarin on the first 2 days and 5 mg on the third day with adjustments based on INR thereafter. Outcomes analyzed were as follows: recurrence of thromboembolism, bleeding events and time taken to enter the therapeutic range. RESULTS: Efficacy, safety and length of hospital stay were similar in both samples. The sample that were given 10 mg entered the therapeutic range earlier (means: 4.5 days vs. 5.8 days, were on lower doses at discharge and had better therapeutic indicators at the first return appointment. CONCLUSIONS: The 10 mg dosage regimen took less time to attain the therapeutic range and was associated with lower warfarin doses at discharge and better INR at first out-patients follow-up visit.

  10. Improved hydrogen sorption kinetics in wet ball milled Mg hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Li

    2011-05-04

    In this work, wet ball milling method is used in order to improve hydrogen sorption behaviour due to its improved microstructure of solid hydrogen materials. Compared to traditional ball milling method, wet ball milling has benefits on improvement of MgH{sub 2} microstructure and further influences on its hydrogen sorption behavior. With the help of solvent tetrahydrofuran (THF), wet ball milled MgH{sub 2} powder has much smaller particle size and its specific surface area is 7 times as large as that of dry ball milled MgH{sub 2} powder. Although after ball milling the grain size is decreased a lot compared to as-received MgH{sub 2} powder, the grain size of wet ball milled MgH{sub 2} powder is larger than that of dry ball milled MgH{sub 2} powder due to the lubricant effect of solvent THF during wet ball milling. The improved particle size and specific surface area of wet ball milled MgH{sub 2} powder is found to be determining its hydrogen sorption kinetics especially at relatively low temperatures. And it also shows good cycling sorption behavior, which decides on its industrial applicability. With three different catalysts MgH{sub 2} powder shows improved hydrogen sorption behavior as well as the cyclic sorption behavior. Among them, the Nb{sub 2}O{sub 5} catalyst is found to be the most effective one in this work. Compared to the wet ball milled MgH{sub 2} powder, the particle size and specific surface area of the MgH{sub 2} powder with catalysts are similar to the previous ones, while the grain size of the MgH{sub 2} with catalysts is much finer. In this case, two reasons for hydrogen sorption improvement are suggested: one is the reduction of the grain size. The other may be as pointed out in some literatures that formation of new oxidation could enhance the hydrogen sorption kinetics, which is also the reason why its hydrogen capacity is decreased compared to without catalysts. After further ball milling, the specific surface area of wet ball milled Mg

  11. Preparation and Hydrogen Storage Properties of Mg-Rich Mg-Ni Ultrafine Particles

    Directory of Open Access Journals (Sweden)

    Jianxin Zou

    2012-01-01

    Full Text Available In the present work, Mg-rich Mg-Ni ultrafine powders were prepared through an arc plasma method. The phase components, microstructure, and hydrogen storage properties of the powders were carefully investigated. It is found that Mg2Ni and MgNi2 could be obtained directly from the vapor state reactions between Mg and Ni, depending on the local vapor content in the reaction chamber. A nanostructured MgH2 + Mg2NiH4 hydrogen storage composite could be generated after hydrogenation of the Mg-Ni ultrafine powders. After dehydrogenation, MgH2 and Mg2NiH4 decomposed into nanograined Mg and Mg2Ni, respectively. Thermogravimetry/differential scanning calorimetry (TG/DSC analyses showed that Mg2NiH4 phase may play a catalytic role in the dehydriding process of the hydrogenated Mg ultrafine particles.

  12. Structural and transport properties of Sn-Mg alloys

    International Nuclear Information System (INIS)

    Meydaneri, F.; Saatci, E.; Oezdemir, M.; Ari, M.; Durmus, S.

    2010-01-01

    The structural and temperature dependence transport of Sn-Mg alloys have been investigated for five different samples (Pure Sn, Sn-1.0 wt % Mg , Sn-2.0 wt % Mg , Sn-6.0 wt.% Mg and Pure Mg). Scanning Electron Microscopy (SEM), x-ray diffraction (XRD) and Energy Dispersive x-ray Analysis (EDX) measurements were carried out in order to clarify the structural properties of the samples. It has been found that, the samples have tetragonal crystal symmetry except the pure Mg which has hexagonal crystal symmetry. The cell parameters decrease slightly with addition of Mg element. The SEM micrographs of the samples show that, the samples have smooth surfaces with clear grain boundary. There is no crack, porosity or defects on the surfaces. The electrical resistivity of the samples increases almost linearly with the increasing temperature, which were measured by four-point probe technique. The thermal conductivity values are in between 0.60-1.00 W/Km, which are decrease slightly with temperature and increase with composition of Mg. The thermal conductivity values of the alloys are in between the values of the pure samples. Thermal conductivity results of the alloys have been compared with available other studies and a good agreement has been seen between the results. In addition, the temperature coefficients of electrical resistivity and thermal conductivity have been determined, which are independent with the compositions of alloying elements

  13. Stabilization of Reactive MgO Surfaces by Ni Doping

    Science.gov (United States)

    Mazheika, Aliaksei; Levchenko, Sergey V.

    Ni-MgO solid solutions are promising materials for catalytic reduction of CO2 and dry reforming of CH4. To explain the catalytic activity, an ab initio study of Ni-substitutional defects in MgO (NiMg) has been performed. At first, the validation of the theory level was done. We compared results of CCSD(T) embedded-cluster calculations of NiMg formation energies and adsorption energies of CO, CO2 and H2 on them to the HSE(α) hybrid DFT functional with the fraction of the exact exchange α varied between 0 and 1. HSE(0.3) was found to be the best compromise in this study. Our periodic HSE(0.3) calculations show that NiMg defects are most stable at corner sites, followed by steps, and are least stable at (001) terraces. Thus, Ni-doping stabilizes stepped MgO surfaces. The dissociative adsorption of H2 on the terrace is found to be endothermic (+ 1 . 1 eV), whereas on (110) surface with NiMg it is highly exothermic (- 1 . 6 eV). Adsorbed CO2 is also significantly stabilized (- 0 . 6 vs. - 2 . 2 eV). These findings explain recent microcalorimetry measurements of H2 and CO2 adsorption at doped Ni-MgO samples. partially supported by UniCat (Deutsche Forschungsgemeinschaft).

  14. Selective antibacterial effects of mixed ZnMgO nanoparticles

    International Nuclear Information System (INIS)

    Vidic, Jasmina; Stankic, Slavica; Haque, Francia; Ciric, Danica; Le Goffic, Ronan; Vidy, Aurore; Jupille, Jacques; Delmas, Bernard

    2013-01-01

    Antibiotic resistance has impelled the research for new agents that can inhibit bacterial growth without showing cytotoxic effects on humans and other species. We describe the synthesis and physicochemical characterization of nanostructured ZnMgO whose antibacterial activity was compared to its pure nano-ZnO and nano-MgO counterparts. Among the three oxides, ZnO nanocrystals—with the length of tetrapod legs about 100 nm and the diameter about 10 nm—were found to be the most effective antibacterial agents since both Gram-positive (B. subtilis) and Gram-negative (E. coli) bacteria were completely eradicated at concentration of 1 mg/mL. MgO nanocubes (the mean cube size ∼50 nm) only partially inhibited bacterial growth, whereas ZnMgO nanoparticles (sizes corresponding to pure particles) revealed high specific antibacterial activity to Gram-positive bacteria at this concentration. Transmission electron microscopy analysis showed that B. subtilis cells were damaged after contact with nano-ZnMgO, causing cell contents to leak out. Our preliminary toxicological study pointed out that nano-ZnO is toxic when applied to human HeLa cells, while nano-MgO and the mixed oxide did not induce any cell damage. Overall, our results suggested that nanostructured ZnMgO, may reconcile efficient antibacterial efficiency while being a safe new therapeutic for bacterial infections.

  15. Selective antibacterial effects of mixed ZnMgO nanoparticles

    Science.gov (United States)

    Vidic, Jasmina; Stankic, Slavica; Haque, Francia; Ciric, Danica; Le Goffic, Ronan; Vidy, Aurore; Jupille, Jacques; Delmas, Bernard

    2013-05-01

    Antibiotic resistance has impelled the research for new agents that can inhibit bacterial growth without showing cytotoxic effects on humans and other species. We describe the synthesis and physicochemical characterization of nanostructured ZnMgO whose antibacterial activity was compared to its pure nano-ZnO and nano-MgO counterparts. Among the three oxides, ZnO nanocrystals—with the length of tetrapod legs about 100 nm and the diameter about 10 nm—were found to be the most effective antibacterial agents since both Gram-positive ( B. subtilis) and Gram-negative ( E. coli) bacteria were completely eradicated at concentration of 1 mg/mL. MgO nanocubes (the mean cube size 50 nm) only partially inhibited bacterial growth, whereas ZnMgO nanoparticles (sizes corresponding to pure particles) revealed high specific antibacterial activity to Gram-positive bacteria at this concentration. Transmission electron microscopy analysis showed that B. subtilis cells were damaged after contact with nano-ZnMgO, causing cell contents to leak out. Our preliminary toxicological study pointed out that nano-ZnO is toxic when applied to human HeLa cells, while nano-MgO and the mixed oxide did not induce any cell damage. Overall, our results suggested that nanostructured ZnMgO, may reconcile efficient antibacterial efficiency while being a safe new therapeutic for bacterial infections.

  16. Selective antibacterial effects of mixed ZnMgO nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Vidic, Jasmina, E-mail: jasmina.vidic@jouy.inra.fr [VIM, Institut de la Recherche Agronomique (France); Stankic, Slavica, E-mail: slavica.stankic@insp.jussieu.fr; Haque, Francia [CNRS, Institut des Nanosciences de Paris, UMR 7588 (France); Ciric, Danica; Le Goffic, Ronan; Vidy, Aurore [VIM, Institut de la Recherche Agronomique (France); Jupille, Jacques [CNRS, Institut des Nanosciences de Paris, UMR 7588 (France); Delmas, Bernard [VIM, Institut de la Recherche Agronomique (France)

    2013-05-15

    Antibiotic resistance has impelled the research for new agents that can inhibit bacterial growth without showing cytotoxic effects on humans and other species. We describe the synthesis and physicochemical characterization of nanostructured ZnMgO whose antibacterial activity was compared to its pure nano-ZnO and nano-MgO counterparts. Among the three oxides, ZnO nanocrystals-with the length of tetrapod legs about 100 nm and the diameter about 10 nm-were found to be the most effective antibacterial agents since both Gram-positive (B. subtilis) and Gram-negative (E. coli) bacteria were completely eradicated at concentration of 1 mg/mL. MgO nanocubes (the mean cube size {approx}50 nm) only partially inhibited bacterial growth, whereas ZnMgO nanoparticles (sizes corresponding to pure particles) revealed high specific antibacterial activity to Gram-positive bacteria at this concentration. Transmission electron microscopy analysis showed that B. subtilis cells were damaged after contact with nano-ZnMgO, causing cell contents to leak out. Our preliminary toxicological study pointed out that nano-ZnO is toxic when applied to human HeLa cells, while nano-MgO and the mixed oxide did not induce any cell damage. Overall, our results suggested that nanostructured ZnMgO, may reconcile efficient antibacterial efficiency while being a safe new therapeutic for bacterial infections.

  17. Effect of Mg on the Microstructure and Corrosion Resistance of the Continuously Hot-Dip Galvanizing Zn-Mg Coating

    Directory of Open Access Journals (Sweden)

    Anping Dong

    2017-08-01

    Full Text Available The microstructure of continuously hot-dip galvanizing Zn-Mg coating was investigated in order to obtain the mechanism of the effects of Mg on the corrosion resistance. In this paper, the vertical section of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner was calculated. The results indicates that the phase composition of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner is the same as Zn-Mg binary phase diagram, suggesting Al in the Zn-Mg (ZM coatings mainly concentrates on the interfacial layer between the coating and steel substrate. The microstructure of continuously hot-dip galvanizing ZM coatings with 0.20 wt % Al containing 1.0–3.0 wt % Mg was investigated using tunneling electron microscopy (TEM. The morphology of Zn in the coating changes from bulk to strip and finally to mesh-like, and the MgZn2 changes from rod-like to mesh-like with the Mg content increasing. Al in the ZM coatings mainly segregates at the Fe2Al5 inhibition layer and the Mg added to the Zn bath makes this inhibition layer thinner and uneven. Compared to GI coating, the time of the first red rust appears increases by more than two-fold and expansion rate of red rust reduces by more than four-fold in terms of salt spray experiment. The ZM coating containing 2.0 wt % Mg has the best corrosion resistance. The enhanced corrosion resistance of ZM coatings mainly depends on different corrosion products.

  18. LOW Mg/Si PLANETARY HOST STARS AND THEIR Mg-DEPLETED TERRESTRIAL PLANETS

    Energy Technology Data Exchange (ETDEWEB)

    Carter-Bond, Jade C.; O' Brien, David P. [Planetary Science Institute, 1700 E. Fort Lowell, Tucson, AZ 85719 (United States); Delgado Mena, Elisa; Israelian, Garik; Gonzalez Hernandez, Jonay I. [Instituto de Astrofisica de Canarias, 38200 La Laguna, Tenerife (Spain); Santos, Nuno C., E-mail: j.bond@unsw.edu.au [Centro de Astrofisica, Universidade do Porto, Rua das Estrelas, 4150-762 Porto (Portugal)

    2012-03-15

    Simulations have shown that a diverse range of extrasolar terrestrial planet bulk compositions are likely to exist based on the observed variations in host star elemental abundances. Based on recent studies, it is expected that a significant proportion of host stars may have Mg/Si ratios below 1. Here we examine this previously neglected group of systems. Planets simulated as forming within these systems are found to be Mg-depleted (compared to Earth), consisting of silicate species such as pyroxene and various feldspars. Planetary carbon abundances also vary in accordance with the host star C/O ratio. The predicted abundances are in keeping with observations of polluted white dwarfs, lending validity to this approach. Further studies are required to determine the full planetary impacts of the bulk compositions predicted here.

  19. Strength of FePd/MgO and FePt/MgO interfaces from first principles

    Science.gov (United States)

    Černý, M.

    2018-04-01

    Cleavage characteristics such as the cleavage energy and the cleavage stress of FePd/MgO and FePt/MgO interfaces are computed from first principles. Considering several possible cleavage planes, the weakest link in these systems is found as the plane with the lowest cleavage stress. This weakest plane is identified in both systems with the interface plane, where the cohesion is reduced by 30% compared to the MgO bulk. Two distinct models of tensile test are employed to verify the results and convergence of computed values with respect to size of the simulation cell is discussed.

  20. Pharmacokinetic characterization of three novel 4-mg nicotine lozenges
.

    Science.gov (United States)

    Sukhija, Manpreet; Srivastava, Reena; Kaushik, Aditya

    2018-03-01

    Nicotine replacement therapy (NRT) increases the probability of smoking cessation. This study was conducted to determine if three prototype 4-mg nicotine lozenges produced locally in India were bioequivalent to a globally marketed reference product, Nicorette® 4-mg nicotine lozenge. Healthy adult smokers (N = 39) were treated with three prototype 4-mg nicotine lozenges in comparison with a reference 4-mg lozenge in this single-center, randomized, open-label, single-dose, 4-way crossover study. Pharmacokinetic sampling was obtained to test for bioequivalence using maximal plasma concentration (Cmax) and extent of absorption (AUC0-t). Secondarily, AUC;0-∞, time to maximal plasma concentration (tmax), half-life (T1/2), elimination rate constant (Kel), and safety of the prototype lozenges versus the reference lozenge were compared. Each prototype 4-mg nicotine lozenge was found to be bioequivalent to the reference 4-mg nicotine lozenge based on the ratio of geometric means and 90% confidence intervals for Cmax, AUC0-t, and AUC;0-∞. Although tmax; was significantly longer for prototype III, all four lozenges achieved maximum plasma nicotine concentrations at a median of 1.5 hours. The safety profiles of the three prototype 4-mg lozenges did not differ from that of the 4-mg reference product. Each prototype 4-mg nicotine lozenge was bioequivalent to the reference 4-mg nicotine lozenge and was well tolerated. Furthermore, as these bioequivalent prototypes differed in in-vitro dissolution profiles, these data suggest that performance from the in -vitro method deployed is not a firm predictor of pharmacokinetic behavior.
.

  1. Alterations of Mg2+ After Hemorrhagic Shock.

    Science.gov (United States)

    Lee, Mun-Young; Yang, Dong Kwon; Kim, Shang-Jin

    2017-11-01

    Hemorrhagic shock is generally characterized by hemodynamic instability with cellular hypoxia and diminishing cellular function, resulting from an imbalance between systemic oxygen delivery and consumption and redistribution of fluid and electrolytes. Magnesium (Mg) is the fourth most abundant cation overall and second most abundant intracellular cation in the body and an essential cofactor for the energy production and cellular metabolism. Data for blood total Mg (tMg; free-ionized, protein-bound, and anion-bound forms) and free Mg 2+ levels after a traumatic injury are inconsistent and only limited information is available on hemorrhagic effects on free Mg 2+ as the physiologically active form. The aim of this study was to determine changes in blood Mg 2+ and tMg after hemorrhage in rats identifying mechanism and origin of the changes in blood Mg 2+ . Hemorrhagic shock produced significant increases in blood Mg 2+ , plasma tMg, Na + , K + , Cl - , anion gap, partial pressures of oxygen, glucose, and blood urea nitrogen but significant decreases in RBC tMg, blood Ca 2+ , HCO 3 - , pH, partial pressures of carbon dioxide, hematocrit, hemoglobin, total cholesterol, and plasma/RBC ATP. During hemorrhagic shock, K + , anion gap, and BUN showed significant positive correlations with changes in blood Mg 2+ level, while Ca 2+ , pH, and T-CHO correlated to Mg 2+ in a negative manner. In conclusion, hemorrhagic shock induced an increase in both blood-free Mg 2+ and tMg, resulted from Mg 2+ efflux from metabolic damaged cell with acidosis and ATP depletion.

  2. Mg amorphous alloys for biodegradable implants

    International Nuclear Information System (INIS)

    Danez, G.P.; Koga, G.Y.; Tonucci, S.; Bolfarini, C.; Kiminami, C.S.; Botta Filho, W.J.

    2010-01-01

    The use of implants made from amorphous alloys magnesium-based with additions of zinc and calcium are promising. Properties such as biocompatibility, low density, high mechanical strength, low modulus (as compared to alloys such as stainless steel and titanium), corrosion resistance and wear resistance make it attractive for use in implants. Moreover, the by-products of corrosion and wear are not toxic and may contribute to fixation. Aiming to understand the tendency of this amorphous ternary (Mg-Zn-Ca) and expand the information about this system, this work involved the use of the topological criterion of instability (λ) and the criterion of electronegativity (Δe) to the choice of compositions. The alloys were processed into wedge-shaped and analyzed structurally and in X-ray diffraction and scanning electron microscopy. (author)

  3. Modeling and stabilities of Mg/MgH2 interfaces: A first-principles investigation

    Directory of Open Access Journals (Sweden)

    Jia-Jun Tang

    2014-07-01

    Full Text Available We have theoretically investigated the modeling and the structural stabilities of various Mg/MgH2 interfaces, i.e. Mg(101¯0/MgH2(210, Mg(0001/MgH2(101 and Mg(101¯0/MgH2(101, and provided illuminating insights into Mg/MgH2 interface. Specifically, the main factors, which impact the interfacial energies, are fully considered, including surface energies of two phases, mutual lattice constants of interface model, and relative position of two phases. The surface energies of Mg and MgH2, on the one hand, are found to be greatly impacting the interfacial energies, reflected by the lowest interfacial energy of Mg(0001/MgH2(101 which is comprised of two lowest energy surfaces. On the other hand, it is demonstrated that the mutual lattice constants and the relative position of two phases lead to variations of interfacial energies, thus influencing the interface stabilities dramatically. Moreover, the Mg-H bonding at interface is found to be the determinant of Mg/MgH2 interface stability. Lastly, interfacial and strain effects on defect formations are also studied, both of which are highly facilitating the defect formations. Our results provide a detailed insight into Mg/MgH2 interface structures and the corresponding stabilities.

  4. Comparison of 1 mg and 2 mg overnight dexamethasone suppression tests for the screening of Cushing's syndrome in obese patients.

    Science.gov (United States)

    Sahin, Mustafa; Kebapcilar, Levent; Taslipinar, Abdullah; Azal, Omer; Ozgurtas, Taner; Corakci, Ahmet; Akgul, Emin Ozgur; Taslipinar, Mine Yavuz; Yazici, Mahmut; Kutlu, Mustafa

    2009-01-01

    Obesity is currently a major public health problem and one of the potential underlying causes of obesity in a minority of patients is Cushing's syndrome (CS). Traditionally, the gold standard screening test for CS is 1 mg dexamethasone overnight suppression test. However, it is known that obese subjects have high false positive results with this test. We have therefore compared the 1 mg and 2 mg overnight dexamethasone suppression tests in obese subjects. Patients whose serum cortisol after ODST was >50 nM underwent and a low-dose dexamethasone suppression test (LDDST); 24-hour urine cortisol was collected for basal urinary free cortisol (UFC). For positive results after overnight 1-mg dexamethasone suppression test we also performed the overnight 2-mg dexamethasone suppression test. We prospectively evaluated 100 patients (22 men and 78 women, ranging in age from 17 to 73 years with a body mass index (BMI) >30 kg/m2 who had been referred to our hospital-affiliated endocrine clinic because of simple obesity. Suppression of serum cortisol to suppression. Thyroid function tests, lipid profiles, homocysteine, antithyroglobulin, anti-thyroid peroxidase antibody levels, vitamin B12, folate levels, insulin resistance [by homeostasis model assessment (HOMA)] and 1.0 mg postdexamethasone (postdex) suppression cortisol levels were measured. We found an 8% false-positive rate in 1 mg overnight test and 2% in 2 mg overnight test (p=0.001). There was no correlation between the cortisol levels after ODST and other parameters. Our results indicate that the 2 mg overnight dexamethasone suppression test (ODST) is more convenient and accurate than 1-mg ODST as a screening test for excluding CS in subjects with simple obesity.

  5. Mg and Sr in Arctic echinoderm calcite: Nature or nurture?

    Science.gov (United States)

    Iglikowska, A.; Borszcz, T.; Drewnik, A.; Grabowska, M.; Humphreys-Williams, E.; Kędra, M.; Krzemińska, M.; Piwoni-Piórewicz, A.; Kukliński, P.

    2018-04-01

    The Mg/Ca and Sr/Ca ratios in echinoderm skeletal calcite are used as a proxy for Phanerozoic seawater changes, since the skeletal concentrations are, to some extent, controlled by environmental factors. However, it remains unclear how the influence of environmental factors is modified by vital effects, especially in polar waters. Therefore, the goal of this study was to compare the ratios of Mg/Ca and Sr/Ca among the skeletal parts of 10 common Arctic echinoderm species belonging to three classes Echinoidea, Asteroidea and Ophiuroidea that contribute substantially to the carbon cycle in the Arctic benthic system. Significant differences were recorded in echinoid skeletal element concentrations among specific skeletal parts. The lowest Mg/Ca and Sr/Ca ratios were detected in the spines (mean Mg/Ca 37.5 ± 8.8 SD; Sr/Ca 1.8 ± 0.1). The components of the Aristotle's lantern (epiphyses, pyramids and rotulas) were characterised by the highest Mg levels (Mg/Ca 79.9 ± 6.0; 75.2 ± 9.1; 60.1 ± 3.8, respectively). It is likely that mouth parts experience greater mechanical pressure compared to other body parts, and the higher content of Mg in the Aristotle's lantern contributes to its robustness. We did not find any distinctive trends in the distribution of skeletal elements in the asteroid and ophiuroid skeletal parts. The heterogeneous concentrations of Mg and Sr in different skeleton parts of the echinoids suggest possible physiological regulation of the chemical composition rather than the composition only being influenced by the environment. We cannot recommend echinoderm skeletons as reliable indicators in palaeoenvironmental reconstructions due to the possible biological control of skeletal chemistry, which may interfere with the effect of environmental variables.

  6. Bulk and surface properties of magnesium peroxide MgO2

    Science.gov (United States)

    Esch, Tobit R.; Bredow, Thomas

    2016-12-01

    Magnesium peroxide has been identified in Mg/air batteries as an intermediate in the oxygen reduction reaction (ORR) [1]. It is assumed that MgO2 is involved in the solid-electrolyte interphase on the cathode surface. Therefore its structure and stability play a crucial role in the performance of Mg/air batteries. In this work we present a theoretical study of the bulk and low-index surface properties of MgO2. All methods give a good account of the experimental lattice parameters for MgO2 and MgO bulk. The reaction energies, enthalpies and free energies for MgO2 formation from MgO are compared among the different DFT methods and with the local MP2 method. A pronounced dependence from the applied functional is found. At variance with a previous theoretical study but in agreement with recent experiments we find that the MgO2 formation reaction is endothermic (HSE06-D3BJ: ΔH = 51.9 kJ/mol). The stability of low-index surfaces MgO2 (001) (Es = 0.96 J/m2) and (011) (Es = 1.98 J/m2) is calculated and compared to the surface energy of MgO (001). The formation energy of neutral oxygen vacancies in the topmost layer of the MgO2 (001) surface is calculated and compared with defect formation energies for MgO (001).

  7. Transformation of Mg-bearing amorphous calcium carbonate to Mg-calcite - In situ monitoring

    Science.gov (United States)

    Purgstaller, Bettina; Mavromatis, Vasileios; Immenhauser, Adrian; Dietzel, Martin

    2016-02-01

    The formation of Mg-bearing calcite via an amorphous precursor is a poorly understood process that is of relevance for biogenic and abiogenic carbonate precipitation. In order to gain an improved insight on the controls of Mg incorporation in calcite formed via an Mg-rich amorphous calcium carbonate (Mg-ACC) precursor, the precipitation of Mg-ACC and its transformation to Mg-calcite was monitored by in situ Raman spectroscopy. The experiments were performed at 25.0 ± 0.03 °C and pH 8.3 ± 0.1 and revealed two distinct pathways of Mg-calcite formation: (i) At initial aqueous Mg/Ca molar ratios ⩽ 1:6, Mg-calcite formation occurs via direct precipitation from solution. (ii) Conversely, at higher initial Mg/Ca molar ratios, Mg-calcite forms via an intermediate Mg-rich ACC phase. In the latter case, the final product is a calcite with up to 20 mol% Mg. This Mg content is significant higher than that of the Mg-rich ACC precursor phase. Thus, a strong net uptake of Mg ions from the solution into the crystalline precipitate throughout and also subsequent to ACC transformation is postulated. Moreover, the temporal evolution of the geochemical composition of the reactive solution and the Mg-ACC has no significant effect on the obtained ;solubility product; of Mg-ACC. The enrichment of Mg in calcite throughout and subsequent to Mg-ACC transformation is likely affected by the high aqueous Mg/Ca ratio and carbonate alkalinity concentrations in the reactive solution. The experimental results have a bearing on the formation mechanism of Mg-rich calcites in marine early diagenetic environments, where high carbonate alkalinity concentrations are the rule rather than the exception, and on the insufficiently investigated inorganic component of biomineralisation pathways in many calcite secreting organisms.

  8. Bioequivalence of a single 400-mg dose of imatinib 100-mg oral tablets and a 400-mg tablet in healthy adult Korean volunteers.

    Science.gov (United States)

    Lee, Hae Won; Seong, Sook Jin; Park, Sung Min; Lee, Joomi; Gwon, Mi-Ri; Kim, Hyun-Ju; Lim, Sung Mook; Lim, Mi-Sun; Kim, Woomi; Yang, Dong Heon; Yoon, Young-Ran

    2015-06-01

    Imatinib mesylate (IM) is a selective tyrosine kinase inhibitor for the treatment of chronic myeloid leukemia and gastrointestinal stromal tumors. A new once-daily 400-mg film-coated tablet of imatinib has been developed by a pharmaceutical company in Korea. The present study was designed to assess and compare the PK parameters, bioavailability, and bioequivalence of the new imatinib 400-mg formulation (test) versus the conventional 100-mg formulation (reference) administered as a single 400-mg dose in healthy adult male volunteers. This randomized, open-label, single-dose, two-way crossover study was conducted in healthy Korean male volunteers. Eligible subjects were randomly assigned in a 1 : 1 ratio to receive 400 mg of the test (one 400-mg tablet) or reference (four 100-mg tablets) formulation, followed by a 2-week washout period and administration of the alternate formulation. Serial blood samples were collected at 0 (predose), 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 10, 12, 24, 48, and 72 hours after administration. Plasma imatinib concentrations were determined using liquid chromatography coupled with tandem mass spectrometry. The formulations were to be considered bioequivalent if the 90% confidence intervals (CIs) of the adjusted geometric mean ratios for Cmax, AUC(0-t), and AUC(0-∞)ž were within the predetermined range of 0.80 - 1.25. In total, 35 subjects completed the study. No serious adverse event was reported during the study. The 90% CIs of the adjusted geometric mean ratios of the test formulation to the reference formulation for C(max), AUC(0-t) and AUC(0-∞)ž of imatinib were all within the bioequivalence criteria range of 0.8 - 1.25. The test formulation of imatinib met the Korean regulatory requirements for bioequivalence. Both imatinib formulations were well-tolerated in all subjects.

  9. Prognostic impact of sarcopenia in patients with diffuse large B-cell lymphoma treated with rituximab plus cyclophosphamide, doxorubicin, vincristine, and prednisone.

    Science.gov (United States)

    Go, Se-Il; Park, Mi Jung; Song, Haa-Na; Kim, Hoon-Gu; Kang, Myoung Hee; Lee, Hyang Rae; Kim, Yire; Kim, Rock Bum; Lee, Soon Il; Lee, Gyeong-Won

    2016-12-01

    Sarcopenia is known to be related to an increased risk of chemotherapy toxicity and to a poor prognosis in patients with malignancy. We assessed the prognostic role of sarcopenia in patients with diffuse large B-cell lymphoma (DLBCL). In total, 187 consecutive patients with DLBCL treated with induction rituximab, cyclophosphamide, doxorubicin, vincristine, and prednisolone (R-CHOP) immunochemotherapy were reviewed. Sarcopenia was defined as the lowest sex-specific quartile of the skeletal muscle index, calculated by dividing the pectoralis muscle area by the height. Clinical outcomes were compared between the sarcopenic and non-sarcopenic groups. A nomogram was constructed from the Cox regression model for overall survival (OS). Treatment-related mortality (21.7 vs. 5.0%, P  = 0.002) and early discontinuation of treatment (32.6 vs. 14.9%, P  = 0.008) were more common in the sarcopenic group than in the non-sarcopenic group. The 5 year progression-free survival (PFS) rates were 35.3% in the sarcopenic group and 65.8% in the non-sarcopenic group ( P  Sarcopenia and the five variables of the International Prognostic Index (IPI) were independent prognostic factors in a multivariate analysis for PFS and OS and were used to construct the nomogram. The calibration plot showed good agreement between the nomogram predictions and actual observations. The c index of the nomogram (0.80) was higher than those of other prognostic indices (IPI, 0.77, P  = 0.009; revised-IPI, 0.74, P  Sarcopenia is associated with intolerance to standard R-CHOP chemotherapy as well as a poor prognosis. Moreover, sarcopenia itself can be included in prognostic models in DLBCL.

  10. In vivo and in vitro degradation comparison of pure Mg, Mg-10Gd and Mg-2Ag: a short term study

    Directory of Open Access Journals (Sweden)

    I Marco

    2017-02-01

    Full Text Available The purpose of this study was to compare short term in vitro and in vivo biodegradation studies with low purity Mg (> 99.94 %, Mg-10Gd and Mg-2Ag designed for biodegradable implant applications. Three in vitro testing conditions were applied, using (i phosphate buffered saline (PBS, (ii Hank’s balanced salt solution (HBSS and (iii Dulbecco’s modified eagle medium (DMEM in 5 % CO2 under sterile conditions. Gas evolution and mass loss (ML were assessed, as well as the degradation layer, by elemental mapping and scanning electron microscopy (SEM. In vivo, implantations were performed on male Sprague-Dawley rats evaluating both, gas cavity volume and implant volume reduction by micro-computed tomography (µCT, 7 d after implantation. Samples were produced by casting, solution heat treatment and extrusion in disc and pin shape for the in vitro and in vivo experiments, respectively. Results showed that when the processing of the Mg sample varied, differences were found not only in the alloy impurity content and the grain size, but also in the corrosion behaviour. An increase of Fe and Ni or a large grain size seemed to play a major role in the degradation process, while the influence of alloying elements, such as Gd and Ag, played a secondary role. Results also indicated that cell culture conditions induced degradation rates and degradation layer elemental composition comparable to in vivo conditions. These in vitro and in vivo degradation layers consisted of Mg hydroxide, Mg-Ca carbonate and Ca phosphate.

  11. Re-examining the 26Mg(α ,α')26Mg reaction: Probing astrophysically important states in 26Mg

    Science.gov (United States)

    Adsley, P.; Brümmer, J. W.; Li, K. C. W.; Marín-Lámbarri, D. J.; Kheswa, N. Y.; Donaldson, L. M.; Neveling, R.; Papka, P.; Pellegri, L.; Pesudo, V.; Pool, L. C.; Smit, F. D.; van Zyl, J. J.

    2017-11-01

    Background: The 22Ne(α ,n )25Mg reaction is one of the neutron sources for the s process in massive stars. The properties of levels in 26Mg above the α -particle threshold control the strengths of the 22Ne(α ,n )25Mg and 22Ne(α ,γ )26Mg reactions. The strengths of these reactions as functions of temperature are one of the major uncertainties in the s process. Purpose: Information on the existence, spin, and parity of levels in 26Mg can assist in constraining the strengths of the 22Ne(α ,γ )26Mg and 22Ne(α ,n )25Mg reactions, and therefore in constraining s -process abundances. Methods: Inelastically scattered α particles from a 26Mg target were momentum-analyzed in the K600 magnetic spectrometer at iThemba LABS, South Africa. The differential cross sections of states were deduced from the focal-plane trajectory of the scattered α particles. Based on the differential cross sections, spin and parity assignments to states are made. Results: A newly assigned 0+ state was observed in addition to a number of other states, some of which can be associated with states observed in other experiments. Some of the deduced Jπ values of the states observed in the present study show discrepancies with those assigned in a similar experiment performed at RCNP Osaka. The reassignments and additions of the various states can strongly affect the reaction rate at low temperatures. Conclusion: The number, location, and assignment of levels in 26Mg that may contribute to the 22Ne+α reactions are not clear. Future experimental investigations of 26Mg must have an extremely good energy resolution to separate the contributions from different levels. Coincidence experiments of 26Mg provide a possible route for future investigations.

  12. Antibacterial biodegradable Mg-Ag alloys

    Directory of Open Access Journals (Sweden)

    D Tie

    2013-06-01

    Full Text Available The use of magnesium alloys as degradable metals for biomedical applications is a topic of ongoing research and the demand for multifunctional materials is increasing. Hence, binary Mg-Ag alloys were designed as implant materials to combine the favourable properties of magnesium with the well-known antibacterial property of silver. In this study, three Mg-Ag alloys, Mg2Ag, Mg4Ag and Mg6Ag that contain 1.87 %, 3.82 % and 6.00 % silver by weight, respectively, were cast and processed with solution (T4 and aging (T6 heat treatment.The metallurgical analysis and phase identification showed that all alloys contained Mg4Ag as the dominant β phase. After heat treatment, the mechanical properties of all Mg-Ag alloys were significantly improved and the corrosion rate was also significantly reduced, due to presence of silver. Mg(OH2 and MgO present the main magnesium corrosion products, while AgCl was found as the corresponding primary silver corrosion product. Immersion tests, under cell culture conditions, demonstrated that the silver content did not significantly shift the pH and magnesium ion release. In vitro tests, with both primary osteoblasts and cell lines (MG63, RAW 264.7, revealed that Mg-Ag alloys show negligible cytotoxicity and sound cytocompatibility. Antibacterial assays, performed in a dynamic bioreactor system, proved that the alloys reduce the viability of two common pathogenic bacteria, Staphylococcus aureus (DSMZ 20231 and Staphylococcus epidermidis (DSMZ 3269, and the results showed that the killing rate of the alloys against tested bacteria exceeded 90%. In summary, biodegradable Mg-Ag alloys are cytocompatible materials with adjustable mechanical and corrosion properties and show promising antibacterial activity, which indicates their potential as antibacterial biodegradable implant materials.

  13. Loss of Endothelial Barrier in Marfan Mice (mgR/mgR Results in Severe Inflammation after Adenoviral Gene Therapy.

    Directory of Open Access Journals (Sweden)

    Philipp Christian Seppelt

    Full Text Available Marfan syndrome is an autosomal dominant inherited disorder of connective tissue. The vascular complications of Marfan syndrome have the biggest impact on life expectancy. The aorta of Marfan patients reveals degradation of elastin layers caused by increased proteolytic activity of matrix metalloproteinases (MMPs. In this study we performed adenoviral gene transfer of human tissue inhibitor of matrix metalloproteinases-1 (hTIMP-1 in aortic grafts of fibrillin-1 deficient Marfan mice (mgR/mgR in order to reduce elastolysis.We performed heterotopic infrarenal transplantation of the thoracic aorta in female mice (n = 7 per group. Before implantation, mgR/mgR and wild-type aortas (WT, C57BL/6 were transduced ex vivo with an adenoviral vector coding for human TIMP-1 (Ad.hTIMP-1 or β-galactosidase (Ad.β-Gal. As control mgR/mgR and wild-type aortas received no gene therapy. Thirty days after surgery, overexpression of the transgene was assessed by immunohistochemistry (IHC and collagen in situ zymography. Histologic staining was performed to investigate inflammation, the neointimal index (NI, and elastin breaks. Endothelial barrier function of native not virus-exposed aortas was evaluated by perfusion of fluorescent albumin and examinations of virus-exposed tissue were performed by transmission electron microscopy (TEM.IHC and ISZ revealed sufficient expression of the transgene. Severe cellular inflammation and intima hyperplasia were seen only in adenovirus treated mgR/mgR aortas (Ad.β-Gal, Ad.hTIMP-1 NI: 0.23; 0.43, but not in native and Ad.hTIMP-1 treated WT (NI: 0.01; 0.00. Compared to native mgR/mgR and Ad.hTIMP-1 treated WT aorta, the NI is highly significant greater in Ad.hTIMP-1 transduced mgR/mgR aorta (p = 0.001; p = 0.001. As expected, untreated Marfan grafts showed significant more elastolysis compared to WT (p = 0.001. However, elastolysis in Marfan aortas was not reduced by adenoviral overexpression of hTIMP-1 (compared to untreated

  14. Powder metallurgical low-modulus Ti-Mg alloys for biomedical applications.

    Science.gov (United States)

    Liu, Yong; Li, Kaiyang; Luo, Tao; Song, Min; Wu, Hong; Xiao, Jian; Tan, Yanni; Cheng, Ming; Chen, Bing; Niu, Xinrui; Hu, Rong; Li, Xiaohui; Tang, Huiping

    2015-11-01

    In this work, powder metallurgical (PM) Ti-Mg alloys were prepared using combined techniques of mechanical alloying and spark plasma sintering. The alloys mainly consist of super saturations of Mg in Ti matrix, and some laminar structured Ti- and Mg-rich phases. The PM Ti-Mg alloys contain a homogeneous mixtures of nanocrystalline Mg and Ti phases. The novel microstructures result in unconventional mechanical and biological properties. It has been shown that the PM Ti-Mg alloys have a much lower compression modulus (36-50GPa) compared to other Ti alloys, but still remain a very high compressive strength (1500-1800MPa). In addition, the PM Ti-Mg alloys show good biocompatibility and bioactivity. Mg can dissolve in the simulated body fluids, and induce the formation of the calcium phosphate layer. The compression modulus of PM Ti-Mg alloys decreases with the amount of Mg, while the bioactivity increases. Although the corrosion resistance of Ti-Mg alloys decreases with the content of Mg, the alloys still show good stability in simulated body fluid under electrochemical conditions. The indirect and direct cytotoxicity results show that PM Ti-Mg alloys have a good biocompatibility to NIH-3T3 cells. Therefore, the PM Ti-Mg alloys are promising candidates in biomedical applications. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Comparison of effects of ATP-MgCl2 and adenosine-MgCl2 on renal function following ischemia

    International Nuclear Information System (INIS)

    Sumpio, B.E.; Hull, M.J.; Baue, A.E.; Chaudry, I.H.

    1987-01-01

    ATO-MgCl 2 administration had been shown to accelerate the recovery of renal function following warm ischemia. However, since the major breakdown product of ATP is adenosine, the relative contribution of ATP vs. adenosine in improving renal function following ischemia remains to be determined. To study this, kidneys were subjected to 45 min of normothermic ischemia and then perfused at 100 mmHg with oxygenated Krebs-HCO 3 buffer containing albumin, [ 3 H]inulin, substrates, and either 0.3 mM ATP-MgCl 2 or adenosine-MgCl 2 for 110 min. Perfusate and timed urine samples were collected and analyzed for radioactivity and [Na + ]. The functional parameters indicated that although adenosine-MgCl 2 treatment provided a transient improvement, it failed to provided a sustained improvement in renal function or attain control valued compared with ATP-MgCl 2 treatment. Thus, the salutary effects of ATP-MgCl 2 following warm ischemia in the kidney are not mediated by adenosine

  16. The effect of the MgO buffer layer thickness on magnetic anisotropy in MgO/Fe/Cr/MgO buffer/MgO(001)

    Energy Technology Data Exchange (ETDEWEB)

    Kozioł-Rachwał, Anna, E-mail: a.koziolrachwal@aist.go.jp [National Institute of Advanced Industrial Science and Technology, Spintronics Research Center, Tsukuba, Ibaraki 305-8568 (Japan); AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, al. Mickiewicza 30, 30-059 Kraków (Poland); Nozaki, Takayuki; Zayets, Vadym; Kubota, Hitoshi; Fukushima, Akio; Yuasa, Shinji [National Institute of Advanced Industrial Science and Technology, Spintronics Research Center, Tsukuba, Ibaraki 305-8568 (Japan); Suzuki, Yoshishige [National Institute of Advanced Industrial Science and Technology, Spintronics Research Center, Tsukuba, Ibaraki 305-8568 (Japan); Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama, Toyonaka, Osaka 560-8531 (Japan)

    2016-08-28

    The relationship between the magnetic properties and MgO buffer layer thickness d was studied in epitaxial MgO/Fe(t)/Cr/MgO(d) layers grown on MgO(001) substrate in which the Fe thickness t ranged from 0.4 nm to 1.1 nm. For 0.4 nm ≤ t ≤ 0.7 nm, a non-monotonic coercivity dependence on the MgO buffer thickness was shown by perpendicular magneto-optic Kerr effect magnetometry. For thicker Fe films, an increase in the buffer layer thickness resulted in a spin reorientation transition from perpendicular to the in-plane magnetization direction. Possible origins of these unusual behaviors were discussed in terms of the suppression of carbon contamination at the Fe surface and changes in the magnetoelastic anisotropy in the system. These results illustrate a method to control magnetic anisotropy in MgO/Fe/Cr/MgO(d) via an appropriate choice of MgO buffer layer thickness d.

  17. Ultraviolet spectra of Mg in liquid helium

    International Nuclear Information System (INIS)

    Moriwaki, Y.; Morita, N.

    1999-01-01

    Emission and absorption spectra of Mg atoms implanted in liquid helium have been observed in the ultraviolet region. We have presented a model of exciplex formation of Mg-He 10 and found that this model is more suitable for understanding the dynamics in the 3s3p 1 P→3s 21 S transition than the bubble model. (orig.)

  18. Ab initio calculations of half-metallic ferromagnetism in Cr-doped MgSe and MgTe semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Noor, N.A. [Department of Physics, University of the Punjab, Quaid-e-Azam Campus, 54590 Lahore (Pakistan); Alay-e-Abbas, S.M. [Department of Physics, University of Sargodha, Sargodha 40100 (Pakistan); Department of Physics, GC University Faisalabad, Allama Iqbal Road, Faisalabad 38000 (Pakistan); Sohaib, M.U. [Lahore Development Authority, 54590 Lahore (Pakistan); Ghulam Abbas, S.M. [Department of Chemistry, University of Agriculture, Faisalabad 38040 (Pakistan); Shaukat, A., E-mail: schaukat@gmail.com [Department of Physics, University of Sargodha, Sargodha 40100 (Pakistan)

    2015-01-15

    The full-potential linear-augmented-plane-waves plus local-orbitals (FP-LAPW+lo) method has been employed for investigation of half-metallic ferromagnetism in Cr-doped ordered zinc-blende MgSe and MgTe semiconductors. Calculations of exchange and correlation (XC) effects have been carried out using generalized gradient approximation (GGA) and orbital independent modified Becke–Johnson potential coupled with local (spin) density approximation (mBJLDA). The thermodynamic stability of the compounds and their preferred magnetic orders have been analyzed in terms of the heat of formation and minimum total energy difference in ferromagnetic (FM) and anti-ferromagnetic (AFM) ordering, respectively. Calculated electronic properties reveal that the Cr-doping induces ferromagnetism in MgSe and MgTe which gives rise to a half-metallic (HM) gap at Fermi level (E{sub F}). Further, the electronic band structure is discussed in terms of s (p)–d exchange constants that are consistent with typical magneto-optical experiment and the behavior of charge spin densities is presented for understanding the bonding nature. Our results demonstrate that the higher effective potential for the spin-down case is responsible for p–d exchange splitting. Total magnetic moment (mainly due to Cr-d states) of these compounds is 4µ{sub B}. Importantly, the electronic properties and HM gap obtained using mBJLDA show remarkable improvement as compared to the results obtained using standard GGA functional. - Highlights: • Spin effect theoretical study on Cr-doped MgSe and MgTe is performed. • Half-metallic ferromagnetism in Cr{sub x}Mg{sub 1−x}Se and Cr{sub x}Mg{sub 1−x}Te is established. • Results of WC-GGA and mBJLDA are compared for performance. • HM gaps for Cr{sub x}Mg{sub 1−x}Se and Cr{sub x}Mg{sub 1−x}Te show nonlinear variation with x. • Important values of exchange splitting/constants and moments are reported.

  19. Divorced Eutectic Solidification of Mg-Al Alloys

    Science.gov (United States)

    Monas, Alexander; Shchyglo, Oleg; Kim, Se-Jong; Yim, Chang Dong; Höche, Daniel; Steinbach, Ingo

    2015-08-01

    We present simulations of the nucleation and equiaxed dendritic growth of the primary hexagonal close-packed -Mg phase followed by the nucleation of the -phase in interdendritic regions. A zoomed-in region of a melt channel under eutectic conditions is investigated and compared with experiments. The presented simulations allow prediction of the final properties of an alloy based on process parameters. The obtained results give insight into the solidification processes governing the microstructure formation of Mg-Al alloys, allowing their targeted design for different applications.

  20. Comparison of characteristics of LiF:Mg,Ti e LiF:Mg,Cu,P thermoluminescent dosemeters; Comparacao das caracteristicas dos dosimetros termoluminescentes LiF:Mg,Ti e LiF:Mg,Cu,P

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, M.S.; Filipov, D., E-mail: dfilipov@utfpr.edu.br [Universidade Tecnologica Federal do Parana (UTFPR/DAFIS), Curitiba, PR (Brazil). Departamento Academicao de Fisica; Schelin, H.R. [Instituto de Pesquisa Pele Pequeno Principe (IPPPP), Curitiba, PR (Brazil)

    2014-07-01

    The aim of the current study was to compare the thermoluminescent dosimeters LiF:Mg,Ti (TLD-100) and LiF:Mg,Cu,P (MCP) data, which were acquired by the Federal Technological University - Parana. Tests were realized, for this purpose, such as: sensitivity (only one MCP TLD did not present results within the limit range), linearity (whose MCP result was better than the TLD-100 one), energy dependence (TLD-100 presented lower variation than MCP TLD) and reproducibility (whose TLD-100 results were better than the MCP ones). The results from both dosimeters show that these TLDs attend radiodiagnostic dosimetry criteria, however MCP had more satisfactory results. (author)

  1. Biodegradability engineering of biodegradable Mg alloys: Tailoring the electrochemical properties and microstructure of constituent phases

    Science.gov (United States)

    Cha, Pil-Ryung; Han, Hyung-Seop; Yang, Gui-Fu; Kim, Yu-Chan; Hong, Ki-Ha; Lee, Seung-Cheol; Jung, Jae-Young; Ahn, Jae-Pyeong; Kim, Young-Yul; Cho, Sung-Youn; Byun, Ji Young; Lee, Kang-Sik; Yang, Seok-Jo; Seok, Hyun-Kwang

    2013-01-01

    Crystalline Mg-based alloys with a distinct reduction in hydrogen evolution were prepared through both electrochemical and microstructural engineering of the constituent phases. The addition of Zn to Mg-Ca alloy modified the corrosion potentials of two constituent phases (Mg + Mg2Ca), which prevented the formation of a galvanic circuit and achieved a comparable corrosion rate to high purity Mg. Furthermore, effective grain refinement induced by the extrusion allowed the achievement of much lower corrosion rate than high purity Mg. Animal studies confirmed the large reduction in hydrogen evolution and revealed good tissue compatibility with increased bone deposition around the newly developed Mg alloy implants. Thus, high strength Mg-Ca-Zn alloys with medically acceptable corrosion rate were developed and showed great potential for use in a new generation of biodegradable implants. PMID:23917705

  2. MgO encapsulated mesoporous zeolite for the side chain alkylation of toluene with methanol.

    Science.gov (United States)

    Jiang, Nanzhe; Jin, Hailian; Jeong, Eun-Young; Park, Sang-Eon

    2010-01-01

    Side chain alkylation of toluene with methanol was studied over mesoporous zeolite supported MgO catalysts. MgO were supported onto the carbon templated mesoporous silicalite-1 by direct synthesis route under microwave conditions. This direct synthesis route yields the majority of MgO highly dispersed into the mesopores of the silicalite-1 crystals. The vapor phase alkylation of toluene with methanol was performed over these catalysts under vapor phase conditions at atmospheric pressure. Mesoporous silicalite-1 supported MgO catalysts gave improved yields towards side chain alkylated products compared to the bulk MgO. The higher activity exhibited by 5% MgO supported on mesoporous silicalite compared to the one with 1% MgO can be attributed to the large number of weak basic sites observed from the CO2 TPD.

  3. Thermophysical properties of some liquid binary Mg-based alloys

    Directory of Open Access Journals (Sweden)

    Plevachuk Y.

    2017-01-01

    Full Text Available In this study, some structure-sensitive thermophysical properties, namely, electrical conductivity, thermal conductivity and thermoelectric power of liquid binary alloys Al33.3Mg66.7, Mg47.6Zn52.4 and Mg33.3Zn66.7 (all in wt.%, as the most promising cast alloys to fabricate components for cars, aircraft and other complex engineering products, were investigated. The electrical conductivity and thermoelectric power were measured in a wide temperature range by the four-point contact method. The thermal conductivity was measured by the steady-state concentric cylinder method. The obtained results are compared with literature experimental and calculated data.

  4. Improved Mg-based alloys for hydrogen storage

    Energy Technology Data Exchange (ETDEWEB)

    Sapru, K.; Ming, L.; Stetson, N.T.; Evans, J. [Energy Conversion Devices, Inc., Troy, MI (United States)

    1998-08-01

    The overall objective of this on-going work is to develop low temperature alloys capable of reversibly storing at least 3 wt.% hydrogen, allowing greater than for 2 wt.% at the system level which is required by most applications. Surface modification of Mg can be used to improve its H-sorption kinetics. The authors show here that the same Mg-transition metal-based multi-component alloy when prepared by melt-spinning results in a more homogeneous materials with a higher plateau pressure as compared to preparing the material by mechanical grinding. They have also shown that mechanically alloyed Mg{sub 50}Al{sub 45}Zn{sub 5} results in a sample having a higher plateau pressure.

  5. Optical absorption and thermoluminescence in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature

    International Nuclear Information System (INIS)

    Delgado, L.

    1984-01-01

    Optical absorption and thermoluminescence (TL) studies in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature are presented. In pure Mg O the thermal annihilation of Fe3+ by recombination with thermally released electrons at ∼ 90 and 175 degree centigree and the V center annealing by hole release up to 100 degree centigree cause the observed glow peaks at these temperatures. The TL excitation spectrum shows two maxima at 245 nm (electron center) and 288 nm (Fe3+). In Mg O:Ni X irradiation induces Fe 2 + →- Fe 3 + and Ni 2 + → Ni 3 + oxidations. Two TL emission bands centered at 110 degree centigree (red) and 80 o C (green) are assigned to electron release and their recombination at Fe 3 + and Ni 3 + respectively. In Mg O:Li two TL emission bands, one blue (430 nm) and the other red (730 nm) with excitation maxima at 245 nm (electron center) and 200 nm (hole center) respectively are observed. No V-center formation was detected in both Ni and Li doped samples. (Author) 42 refs

  6. A randomized comparison of daunorubicin 90 mg/m2 vs 60 mg/m2 in AML induction

    DEFF Research Database (Denmark)

    Burnett, A. K.; Russell, N. H.; Hills, R. K.

    2015-01-01

    Modifying induction therapy in acute myeloid leukemia (AML) may improve the remission rate and reduce the risk of relapse, thereby improving survival. Escalation of the daunorubicin dose to 90 mg/m(2) has shown benefit for some patient subgroups when compared with a dose of 45 mg/m(2), and has been...... = .15). In an exploratory subgroup analysis, there was no subgroup that showed significant benefit, although there was a significant interaction by FLT3 ITD mutation. This trial is registered at http://www.isrctn.com as #ISRCTN55675535....

  7. Multifunctional MgO Layer in Perovskite Solar Cells.

    Science.gov (United States)

    Guo, Xudong; Dong, Haopeng; Li, Wenzhe; Li, Nan; Wang, Liduo

    2015-06-08

    A multifunctional magnesium oxide (MgO) layer was successfully introduced into perovskite solar cells (PSCs) to enhance their performance. MgO was coated onto the surface of mesoporous TiO(2) by the decomposition of magnesium acetate and, therefore, could block contact between the perovskite and TiO(2). X-ray photoelectron spectroscopy and infrared spectroscopy showed that the amount of H(2)O/hydroxyl absorbed on the TiO(2) decreased after MgO modification. The UV/Vis absorption spectra of the perovskite with MgO modification revealed an enhanced photoelectric performance compared with that of unmodified perovskite after UV illumination. In addition to the photocurrent, the photovoltage and fill factor also showed an enhancement after modification, which resulted in an increase in the overall efficiency of the cell from 9.6 to 13.9 %. Electrochemical impedance spectroscopy (EIS) confirmed that MgO acts as an insulating layer to reduce charge recombination. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Mg and Ca isotope fractionation during CaCO3 biomineralisation

    International Nuclear Information System (INIS)

    Chang, Veronica T.-C.; Williams, R.J.P.; Makishima, Akio; Belshawl, Nick S.; O'Nions, R. Keith

    2004-01-01

    The natural variation of Mg and Ca stable isotopes of carbonates has been determined in carbonate skeletons of perforate foraminifera and reef coral together with Mg/Ca ratios to assess the influence of biomineralisation processes. The results for coral aragonite suggest its formation, in terms of stable isotope behaviour, approximates to inorganic precipitation from a seawater reservoir. In contrast, results for foraminifera calcite suggest a marked biological control on Mg isotope ratios presumably related to its low Mg content compared with seawater. The bearing of these observations on the use of Mg and Ca isotopes as proxies in paleoceanography is considered

  9. Mg co-ordination with potential carcinogenic molecule acrylamide: Spectroscopic, computational and cytotoxicity studies

    Science.gov (United States)

    Singh, Ranjana; Mishra, Vijay K.; Singh, Hemant K.; Sharma, Gunjan; Koch, Biplob; Singh, Bachcha; Singh, Ranjan K.

    2018-03-01

    Acrylamide (acr) is a potential toxic molecule produced in thermally processed food stuff. Acr-Mg complex has been synthesized chemically and characterized by spectroscopic techniques. The binding sites of acr with Mg were identified by experimental and computational methods. Both experimental and theoretical results suggest that Mg coordinated with the oxygen atom of Cdbnd O group of acr. In-vitro cytotoxicity studies revealed significant decrease in the toxic level of acr-Mg complex as compared to pure acr. The decrease in toxicity on complexation with Mg may be a useful step for future research to reduce the toxicity of acr.

  10. Oral administration of curcumin (Curcuma longa) can attenuate the neutrophil inflammatory response in zymosan-induced arthritis in rats.

    Science.gov (United States)

    Nonose, Nilson; Pereira, José Aires; Machado, Paulo Roberto Moura; Rodrigues, Murilo Rocha; Sato, Daniela Tiemi; Martinez, Carlos Augusto Real

    2014-11-01

    To evaluate the effect of curcumin in the acute phase of zymosan-induced arthritis. Twenty-eight male rats were subjected to intra-articular infiltration of zymosan of both knees and, in four the infiltration was made with saline. The animals were divided into five groups second received every six hours by gavage: corn oil by (positive and negative control); curcumin (100 mg/kg); prednisone 1 mg/kg/day; prednisone 8 mg/kg. All animals were sacrificed after six, 12, 24 and 48 hours of the infiltration. The knees were removed for evaluation of neutrophil infiltration. The number of neutrophils was counted by computer-assisted analysis of the images. The neutrophil infiltrate was stratified into four grades: 0 = normal; + = mild; ++/+++ = moderate; > ++++ = severe. The results were compared using the Mann-Whitney test and the variance by Kruskal-Wallis test adopting a significance level of 5% (pCurcumin reduces inflammatory activity in the first six hours after zymosan-induced arthritis when compared to saline (pCurcumin was more effective than lower doses of prednisone in the first six hours after induction of the arthritis. After 12, 24 and 48 hours, curcumin does not have the same anti-inflammatory effects when compared to prednisone. After 48 hours, prednisone is more effective than curcumin in reducing the inflammatory infiltrate regardless of the dose of prednisone used. Oral administration of curcumin reduces inflammation in the first six hours after experimentally zymosan-induced arthritis.

  11. The effects of intranasal esketamine (84 mg) and oral mirtazapine (30 mg) on on-road driving performance : a double-blind, placebo-controlled study

    NARCIS (Netherlands)

    van de Loo, Aurora J A E; Bervoets, Adriana C; Mooren, Loes; Bouwmeester, Noor H; Garssen, Johan; Zuiker, Rob; van Amerongen, Guido; van Gerven, Joop; Singh, Jaskaran; der Ark, Peter Van; Fedgchin, Maggie; Morrison, Randall; Wajs, Ewa; Verster, Joris

    2017-01-01

    RATIONALE: The purpose of this study is to evaluate the single dose effect of intranasal esketamine (84 mg) compared to placebo on on-road driving performance. Mirtazapine (oral, 30 mg) was used as a positive control, as this antidepressant drug is known to negatively affect driving performance.

  12. Ferrous bisglycinate 25 mg iron is as effective as ferrous sulfate 50 mg iron in the prophylaxis of iron deficiency and anemia during pregnancy in a randomized trial

    DEFF Research Database (Denmark)

    Milman, Nils; Jønsson, Lisbeth; Dyre, Pernille

    2014-01-01

    OBJECTIVE: To compare the effects of oral ferrous bisglycinate 25 mg iron/day vs. ferrous sulfate 50 mg iron/day in the prevention of iron deficiency (ID) and iron deficiency anemia (IDA) in pregnant women. Design: Randomized, double-blind, intention-to-treat study. Setting: Antenatal care clinic...

  13. Superconductivity in MgB{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Muranaka, Takahiro; Akimitsu, Jun [Aoyama Gakuin Univ., Kanagawa (Japan). Dept. of Physics and Mathematics

    2011-07-01

    We review superconductivity in MgB{sub 2} in terms of crystal and electronic structure, electron-phonon coupling, two-gap superconductivity and application. Finally, we introduce the development of new superconducting materials in related compounds. (orig.)

  14. Additive Manufacturing of Magnesium (Mg) Alloys

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed work is to investigate additive manufacturing techniques for Mg alloys.  It will leverage off research being conducted at University of Florida and...

  15. Luminescence and paramagnetic centers in antigorite and Lizardite, two members of serpentine group: a comparative study;Estudo comparativo entre as propriedades dos centros luminescentes e paramagneticos da antigorita e da lizardita do grupo da SERPENTINA: Mg{sub 3} [Si{sub 2}O{sub 5}] (OH){sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Rocca, Rene Rojas, E-mail: renerr@usp.b

    2008-07-01

    In this work, we are describing crystals luminescent properties of Antigorite (monoclinic, Mg{sub 3-x}[Si{sub 2}O{sub 5}](OH){sub 4-2x}) and Lizardite (triclinic, Mg{sub 3}[(Si,Fe){sub 2}O{sub 5}](OH){sub 4}). They were studied simultaneously applying several techniques, like: Thermoluminescence (TL), Optical Absorption (OA), Electron Paramagnetic Resonance (EPR), X-rays diffraction and Inductively Coupled Plasma (ICP). Using cold pressed elements and heating the samples to 350 deg C for TL measurements, we can observe reproductive peaks. Antigorita show well differentiated peaks and intensities, but Lizardite show overlapped and similar intensity peaks. Peaks of both samples occur around 150, 200, 250, 300 deg C, and all them grow linearly up to 2 kGy, saturating for high doses, except 250 deg C peak which continue growing with dose until 172 kGy. TL peaks trap parameters and lifetimes were calculated, the curves were fitted using the GCD method with second order kinetic. The EPR spectrum shows 6 hyperfine structure lines, characteristic of Manganese, besides lines due to Iron. It was possible also to observe two super hyperfine Mn{sup 2+} lines. The EPR signal does not change with irradiation dose in both crystals. These impurities were also detected in the ICP analysis. The OA spectrum of lizardite show bands from 370 to 470 nm which were not observed in antigorite samples probably related to Fe{sup 3+} and Mn{sup 2+}. In the infrared region several (OA) bands of Mg-OH combination were observed. Again the OA spectrum of these crystals does not change with irradiation dose. We conclude that TL samples peaks around 150, 200, 250, 300 deg C can be used for radiation ionizing dosimetry (y-rays and B- particle) for intermediate and high doses. (author)

  16. Strengthening and toughening of poly(L-lactide) composites by surface modified MgO whiskers

    Energy Technology Data Exchange (ETDEWEB)

    Wen, Wei [Biomaterial Research Laboratory, Department of Material Science and Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632 (China); Luo, Binghong, E-mail: tluobh@jnu.edu.cn [Biomaterial Research Laboratory, Department of Material Science and Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632 (China); Engineering Research Center of Artificial Organs and Materials, Ministry of Education, Guangzhou 510632 (China); Qin, Xiaopeng; Li, Cairong [Biomaterial Research Laboratory, Department of Material Science and Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632 (China); Liu, Mingxian; Ding, Shan [Biomaterial Research Laboratory, Department of Material Science and Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632 (China); Engineering Research Center of Artificial Organs and Materials, Ministry of Education, Guangzhou 510632 (China); Zhou, Changren, E-mail: tcrz9@jnu.edu.cn [Biomaterial Research Laboratory, Department of Material Science and Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632 (China); Engineering Research Center of Artificial Organs and Materials, Ministry of Education, Guangzhou 510632 (China)

    2015-03-30

    Highlights: • The grafted PLLA chain on the surface of g-MgO whisker was ruled out by FTIR spectroscopy and TG/DTG analyses. • The excellent dispersion of g-MgO whiskers and the strong interfacial adhesion of g-MgO whiskers/PLLA composite were proved by FSEM. • Comparing to MgO particles and MgO whiskers, fibrous-like g-MgO whiskers are the most effective reinforcing and toughening fillers for PLLA. - Abstract: To improve both the strength and toughness of poly(L-lactide) (PLLA), fibrous-like MgO whiskers with diameters of 0.15–1 μm and lengths of 15–110 μm were prepared, and subsequently surface modified with L-lactide to obtain grafted MgO whiskers (g-MgO whiskers). The structures and properties of MgO whiskers and g-MgO whiskers were studied. Then, a series of MgO whiskers/PLLA and g-MgO whiskers/PLLA composites were prepared by solution casting method, for comparison, MgO particles/PLLA composite was prepared too. The resulting composites were evaluated in terms of hydrophilicity, crystallinity, dispersion of whiskers, interfacial adhesion and mechanical performance by means of polarized optical microscopy (POM), contact angle measurement, field emission scanning electron microscope (FSEM), transmission electron microscopy (TEM) and tensile testing. The results revealed that the crystallization rate and hydrophilicity of PLLA were improved by the introduction of MgO whiskers and g-MgO whiskers. The g-MgO whiskers can disperse more uniformly in and show stronger interfacial adhesion with the matrix than MgO whiskers as a result of the surface modification. Due to the bridge effect of the whiskers and the excellent interfacial adhesion between g-MgO whiskers and PLLA, g-MgO whiskers/PLLA composites exhibited remarkably higher strength, modulus and toughness compared to the pristine PLLA, MgO particles/PLLA and MgO whiskers/PLLA composites.

  17. Chondrogenic differentiation of ATDC5-cells under the influence of Mg and Mg alloy degradation.

    Science.gov (United States)

    Martinez Sanchez, Adela H; Feyerabend, Frank; Laipple, Daniel; Willumeit-Römer, Regine; Weinberg, Annelie; Luthringer, Bérengère J C

    2017-03-01

    Biodegradable magnesium (Mg)-based materials are a potential alternative to permanent implants for application in children. Nevertheless effects of those materials on growth plate cartilage and chondrogenesis have not been previously evaluated. In vitro differentiation of ATDC5 cells was evaluated under the influence of pure Mg (PMg), Mg with 10wt% of gadolinium (Mg-10Gd) and Mg with 2wt% of silver (Mg-2Ag) degradation products (extracts) and direct cell culture on the materials. Gene expression showed an inhibitory effect on ATDC5 mineralization with the three extracts and a chondrogenic potential of Mg-10Gd. Cells cultured in Mg-10Gd and Mg-2Ag extracts showed the same proliferation and morphology than cells cultured in growth conditions. Mg-10Gd induced an increase in production of ECM and a bigger cell size, similar to the effects found with differentiation conditions. An increased metabolic activity was observed in cells cultured under the influence of Mg-10Gd extracts, indicated by an acidic pH during most of the culture period. After 7days of culture on the materials, ATDC5 growth, distribution and ECM synthesis were higher on Mg-10Gd samples, followed by Mg-2Ag and PMg, which was influenced by the homogeneity and composition of the degradation layer. This study confirmed the tolerance of ATDC5 cells to Mg-based materials and a chondrogenic effect of Mg-10Gd. Further studies in vitro and in vivo are necessary to evaluate cell reactions to those materials, as well as the effects on bone growth and the biocompatibility of the alloying system in the body. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Mg/Ca of Continental Ostracode Shells

    Science.gov (United States)

    Ito, E.; Forester, R. M.; Marco-Barba, J.; Mezquita, F.

    2007-12-01

    Marine ionic chemistry is thought to remain constant. This, together with the belief that marine calcifiers partition Mg/Ca in a systematic manner as functions of temperature (and Mg/Ca) of water forms the basis of the Mg/Ca thermometer. In continental settings both of these assumptions are usually not true. Continental waters contain a wide variety of solutes in absolute and relative ion concentrations. Hence, waters with identical Mg/Ca may have very different concentrations of Mg and Ca and very different anions. Here we use two examples to focus on the effects of ion chemistry on Mg/Ca partitioning in continental ostracode shells and we ignore the complexities of solute evolution, which can change Mg/Ca over timescales of minutes to millennia. Palacios-Fest and Dettman (2001) conducted a monthly study of ,Cypridopsis vidua at El Yeso Lake in Sonora, Mexico. They established a relation between temperature and average shell Mg/Ca using regression analyses on averaged data. When their Mg/Ca-temperature relation is applied to monthly ,C. vidua data from Page Pond near Cleveland, Ohio, water temperatures of -8 to -1°C are obtained. The observed Mg/Ca ranges for El Yeso Lake (0.31 to 0.46) and Page Pond (0.33 to 0.46) are similar, as are their specific conductivities (700 to 850μS for El Yeso Lake; 400 to 600μS for Page Pond). However, [Ca] is 140-260 mg/L for El Yeso, but only 70-90 mg/L for Page Pond. Page Pond data, in fact, shows a good temperature shell Mg/Ca relation for .C. vidua, but the relation is different from that at El Yeso. Hence, shell Mg/Ca is a multi-valued, family of curves function of temperature and Mg/Ca of water that depends on the [Mg] and [Ca] values in water and perhaps other factors. Our second example comes from sites near Valencia, Spain and involves shell data for ,Cyprideis torosa, an estuarine ostracode that is tolerant of a wide range of salinity and can live in continental waters as long as the carbonate alkalinity to Ca ratio is

  19. [Observation on therapeutic effect of chronic fatigue syndrome treated with coiling dragon needling and moving cupping on back].

    Science.gov (United States)

    Xu, Wei; Zhou, Ri-Hua; Li, Lei; Jiang, Ming-Wei

    2012-03-01

    To compare the differences of therapeutic effect of chronic fatigue syndrome treated with the combined therapy of coiling dragon needling and cupping on back and the western medicine therapy with Prednisone. Seventy-two cases were randomly divided into an acupuncture and cupping group (37 cases) and a Prednisone group (35 cases). In acupuncture and cupping group, Jiaji (EX-B 2) points of T1--L5 were applied with coiling dragon needling (once a day), combined with moving cupping on back (once every two days); in Prednisone group, Prednisone tablets were orally taken for 10 mg at 8:00 am. Seven days made one course, and 2 courses were carried on totally. FS-14 scale and BELL's chronic fatigue syndrome integral table were applied to evaluate the fatigue degree of patients before and after treatment, and the therapeutic effects of both groups were compared. After one course of treatment, the BELL's scores of both groups were obviously improved (both P 0.05); after two courses of treatment, the BELL's score in acupuncture and cupping group improved more obviously than that in Prednisone group, and the total effective rate of 91.9% (34/37) in acupuncture and cupping group was superior to that of 71.4% (25/35) in Prednisone group (P cupping on back is positive, superior to that of Prednisone with oral administration.

  20. A comparison of amorphous calcium carbonate crystallization in aqueous solutions of MgCl2 and MgSO4: implications for paleo-ocean chemistry

    Science.gov (United States)

    Han, Mei; Zhao, Yanyang; Zhao, Hui; Han, Zuozhen; Yan, Huaxiao; Sun, Bin; Meng, Ruirui; Zhuang, Dingxiang; Li, Dan; Liu, Binwei

    2018-04-01

    Based on the terminology of "aragonite seas" and "calcite seas", whether different Mg sources could affect the mineralogy of carbonate sediments at the same Mg/Ca ratio was explored, which was expected to provide a qualitative assessment of the chemistry of the paleo-ocean. In this work, amorphous calcium carbonate (ACC) was prepared by direct precipitation in anhydrous ethanol and used as a precursor to study crystallization processes in MgSO4 and MgCl2 solutions having different concentrations at 60 °C (reaction times 240 and 2880 min). Based on the morphology of the aragonite crystals, as well as mineral saturation indices and kinetic analysis of geochemical processes, it was found that these crystals formed with a spherulitic texture in 4 steps. First, ACC crystallized into columnar Mg calcite by nearly oriented attachment. Second, the Mg calcite changed from columnar shapes into smooth dumbbell forms. Third, the Mg calcite transformed into rough dumbbell or cauliflower-shaped aragonite forms by local dissolution and precipitation. Finally, the aragonite transformed further into spherulitic radial and irregular aggregate forms. The increase in Ca2+ in the MgSO4 solutions compared with the MgCl2 solutions indicates the fast dissolution and slow precipitation of ACC in the former solutions. The phase transition was more complete in the 0.005 M MgCl2 solution, whereas Mg calcite crystallized from the 0.005 M MgSO4 solution, indicating that Mg calcite could be formed more easily in an MgSO4 solution. Based on these findings, aragonite and Mg calcite relative to ACC could be used to provide a qualitative assessment of the chemistry of the paleo-ocean. Therefore, calcite seas relative to high-Mg calcite could reflect a low concentration MgSO4 paleo-ocean, while aragonite seas could be related to an MgCl2 or high concentration of MgSO4 paleo-ocean.

  1. Effects of graphite doping on critical current density and microstructure of MgB2 bulks by an improved Mg-diffusion method

    International Nuclear Information System (INIS)

    Pan, X.F.; Zhao, Y.; Feng, Y.; Yang, Y.; Cheng, C.H.

    2008-01-01

    abstract: A series of graphite-doped MgB 2 bulks with high density have been successfully prepared by an improved Mg-diffusion method in ambient pressure. The effects of graphite doping on lattice parameters, T c , J c and microstructure of MgB 2 have been investigated. The results show that compared to the nano-C-doped or CNTs-doped MgB 2 , C is not easy to substitute B in graphite-doped MgB 2 . However, at the same C content, the graphite-doped MgB 2 has a higher J c . At 10 K and self-field, the J c for MgB 1.985 C 0.015 reaches 0.58 MA/cm 2 . For the MgB 1.945 C 0.055 , at 5 K, 7 T and 10 K, 6 T the J c achieves 10,000 A/cm 2 which is two orders of magnitude higher than that for the undoped sample. In addition to improving electron scattering and intergranular connectivity, the unreacted graphite in the graphite-doped MgB 2 is proposed to be responsible to the excellent J c properties of MgB 2 in high fields, due to depressed grain growth and enhanced grain boundary flux pinning

  2. Formation and Corrosion Resistance of Mg-Al Hydrotalcite Film on Mg-Gd-Zn Alloy

    Science.gov (United States)

    Ba, Z. X.; Dong, Q. S.; Kong, S. X.; Zhang, X. B.; Xue, Y. J.; Chen, Y. J.

    2017-06-01

    An environment-friendly technique for depositing a Mg-Al hydrotalcite (HT) (Mg6Al2(OH)16-CO3ṡ4H2O) conversion film was developed to protect the Mg-Gd-Zn alloy from corrosion. The morphology and chemical compositions of the film were analyzed by scanning electronic microscope (SEM) equipped with energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and Raman spectroscopy (RS), respectively. The electrochemical test and hydrogen evolution test were employed to evaluate the biocorrosion behavior of Mg-Gd-Zn alloy coated with the Mg-Al HT film in the simulated body fluid (SBF). It was found that the formation of Mg-Al HT film was a transition from amorphous precursor to a crystalline HT structure. The HT film can effectively improve the corrosion resistance of magnesium alloy. It indicates that the process provides a promising approach to modify Mg-Gd-Zn alloy.

  3. Melting relations in the MgO-MgSiO3 system up to 70 GPa

    Science.gov (United States)

    Ohnishi, Satoka; Kuwayama, Yasuhiro; Inoue, Toru

    2017-06-01

    Melting experiments in a binary system MgO-MgSiO3 were performed up to 70 GPa using a CO2 laser heated diamond anvil cell. The quenched samples were polished and analyzed by a dualbeam focused ion beam (FIB) and a field emission scanning electron microscope (FE-SEM), respectively. The liquidus phase and the eutectic composition were determined on the basis of textual and chemical analyses of sample cross sections. Our experimental results show that the eutectic composition is the Si/Mg molar ratio of 0.76 at 35 GPa and it decreases with increasing pressure. Above 45 GPa, it becomes relatively constant at about 0.64-0.65 Si/Mg molar ratio. Using our experimental data collected at a wide pressure range up to 70 GPa together with previous experimental data, we have constructed a thermodynamic model of the eutectic composition of the MgO-MgSiO3 system. The eutectic composition extrapolated to the pressure and temperature conditions at the base of the mantle is about 0.64 Si/Mg molar ratio. The modeled eutectic composition is quite consistent with a previous prediction from ab initio calculations (de Koker et al. in Earth Planet Sci Lett 361:58-63, 2013), suggesting that the simple assumption of a non-ideal regular solution model can well describe the melting relation of the MgO-MgSiO3 system at high pressure. Our results show that the liquidus phase changes from MgO-periclase to MgSiO3-bridgmanite at 35 GPa for the simplified pyrolite composition ( 0.7 Si/Mg molar ratio), while MgSiO3-bridgmanite is the liquidus phase at the entire lower mantle conditions for the chondritic composition ( 0.84 Si/Mg molar ratio).

  4. Chondrogenic differentiation of ATDC5-cells under the influence of Mg and Mg alloy degradation

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Sanchez, Adela H., E-mail: adela.martinez@hzg.de [Helmholtz-Zentrum Geesthacht, Institute of Material Research, Department for Structural Research on Macromolecules, Geesthacht (Germany); Feyerabend, Frank; Laipple, Daniel; Willumeit-Römer, Regine [Helmholtz-Zentrum Geesthacht, Institute of Material Research, Department for Structural Research on Macromolecules, Geesthacht (Germany); Weinberg, Annelie [Department of Orthopedics and Orthopedic Surgery, Medical University of Graz (Austria); Luthringer, Bérengère J.C. [Helmholtz-Zentrum Geesthacht, Institute of Material Research, Department for Structural Research on Macromolecules, Geesthacht (Germany)

    2017-03-01

    Biodegradable magnesium (Mg)-based materials are a potential alternative to permanent implants for application in children. Nevertheless effects of those materials on growth plate cartilage and chondrogenesis have not been previously evaluated. In vitro differentiation of ATDC5 cells was evaluated under the influence of pure Mg (PMg), Mg with 10 wt% of gadolinium (Mg-10Gd) and Mg with 2 wt% of silver (Mg-2Ag) degradation products (extracts) and direct cell culture on the materials. Gene expression showed an inhibitory effect on ATDC5 mineralization with the three extracts and a chondrogenic potential of Mg-10Gd. Cells cultured in Mg-10Gd and Mg-2Ag extracts showed the same proliferation and morphology than cells cultured in growth conditions. Mg-10Gd induced an increase in production of ECM and a bigger cell size, similar to the effects found with differentiation conditions. An increased metabolic activity was observed in cells cultured under the influence of Mg-10Gd extracts, indicated by an acidic pH during most of the culture period. After 7 days of culture on the materials, ATDC5 growth, distribution and ECM synthesis were higher on Mg-10Gd samples, followed by Mg-2Ag and PMg, which was influenced by the homogeneity and composition of the degradation layer. This study confirmed the tolerance of ATDC5 cells to Mg-based materials and a chondrogenic effect of Mg-10Gd. Further studies in vitro and in vivo are necessary to evaluate cell reactions to those materials, as well as the effects on bone growth and the biocompatibility of the alloying system in the body. - Highlights: • Degradation of PMg, and Mg-2Ag do not influence ATDC5 cells growth and chondrogenic redifferentiation. • Mg-10Gd enhances fast chondrogenic redifferentiation and expression of hyperthrophic markers on ATDC5 cells. • Further evaluation of the effects of PMg, Mg-10Gd and Mg-2Ag in vivo are necessary to confirm its potential for application in growing bones.

  5. Chondrogenic differentiation of ATDC5-cells under the influence of Mg and Mg alloy degradation

    International Nuclear Information System (INIS)

    Martinez Sanchez, Adela H.; Feyerabend, Frank; Laipple, Daniel; Willumeit-Römer, Regine; Weinberg, Annelie; Luthringer, Bérengère J.C.

    2017-01-01

    Biodegradable magnesium (Mg)-based materials are a potential alternative to permanent implants for application in children. Nevertheless effects of those materials on growth plate cartilage and chondrogenesis have not been previously evaluated. In vitro differentiation of ATDC5 cells was evaluated under the influence of pure Mg (PMg), Mg with 10 wt% of gadolinium (Mg-10Gd) and Mg with 2 wt% of silver (Mg-2Ag) degradation products (extracts) and direct cell culture on the materials. Gene expression showed an inhibitory effect on ATDC5 mineralization with the three extracts and a chondrogenic potential of Mg-10Gd. Cells cultured in Mg-10Gd and Mg-2Ag extracts showed the same proliferation and morphology than cells cultured in growth conditions. Mg-10Gd induced an increase in production of ECM and a bigger cell size, similar to the effects found with differentiation conditions. An increased metabolic activity was observed in cells cultured under the influence of Mg-10Gd extracts, indicated by an acidic pH during most of the culture period. After 7 days of culture on the materials, ATDC5 growth, distribution and ECM synthesis were higher on Mg-10Gd samples, followed by Mg-2Ag and PMg, which was influenced by the homogeneity and composition of the degradation layer. This study confirmed the tolerance of ATDC5 cells to Mg-based materials and a chondrogenic effect of Mg-10Gd. Further studies in vitro and in vivo are necessary to evaluate cell reactions to those materials, as well as the effects on bone growth and the biocompatibility of the alloying system in the body. - Highlights: • Degradation of PMg, and Mg-2Ag do not influence ATDC5 cells growth and chondrogenic redifferentiation. • Mg-10Gd enhances fast chondrogenic redifferentiation and expression of hyperthrophic markers on ATDC5 cells. • Further evaluation of the effects of PMg, Mg-10Gd and Mg-2Ag in vivo are necessary to confirm its potential for application in growing bones.

  6. Mechanical properties, corrosion, and biocompatibility of Mg-Zr-Sr-Dy alloys for biodegradable implant applications.

    Science.gov (United States)

    Ding, Yunfei; Lin, Jixing; Wen, Cuie; Zhang, Dongmei; Li, Yuncang

    2017-11-28

    This study investigates the microstructure, mechanical properties, corrosion behavior, and biocompatibility of magnesium (Mg)-based Mg1Zr2SrxDy (x = 0, 1, 1.63, 2.08 wt %) alloys for biodegradable implant applications. The corrosion behavior of the Mg-based alloys has been evaluated in simulated body fluid using an electrochemical technique and hydrogen evolution. The biocompatibility of the Mg-based alloys has been assessed using SaSO2 cells. Results indicate that the addition of Dy to Mg-Zr-Sr alloy showed a positive impact on the corrosion behavior and significantly decreased the degradation rates of the alloys. The degradation rate of Mg1Zr2Sr1.0Dy decreased from 17.61 to 12.50 mm year -1 of Mg1Zr2Sr2.08Dy based on the hydrogen evolution. The ultimate compressive strength decreased from 270.90 MPa for Mg1Zr2Sr1Dy to 236.71 MPa for Mg1Zr2Sr2.08Dy. An increase in the addition of Dy to the Mg-based alloys resulted in an increase in the volume fraction of the Mg 2 Dy phase, which mitigated the galvanic effect between the Mg 17 Sr 2 phase and the Mg matrix, and led to an increase in the corrosion resistance of the base alloy. The biocompatibility of the Mg-based alloys was enhanced with decreasing corrosion rates. Mg1Zr2Sr2.08Dy exhibited the lowest corrosion rate and the highest biocompatibility compared with the other Mg-based alloys. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2017. © 2017 Wiley Periodicals, Inc.

  7. Energetic prediction on the stability of A2Mg12Si7, A2Mg4Si3, and AMgSi in the A2Si–Mg2Si system (A = Ca, Sr and Ba) and their calculated electronic structures

    International Nuclear Information System (INIS)

    Imai, Yoji; Mori, Yoshihisa; Nakamura, Shigeyuki; Takarabe, Ken-ichi

    2014-01-01

    Highlights: • Formation energies of A 2 Mg 4 Si 3 , A 2 Mg 12 Si 7 , and AMgSi (A = Ca,Sr,Ba) were calculated. • All AMgSi are quite stable compared to mixture of A 2 Si and Mg 2 Si. • Ba 2 Mg 4 Si 3 and Sr 2 Mg 4 Si 3 are predicted to be stable, but Ca 2 Mg 4 Si 3 is not. • Ca 2 Mg 12 Si 7 and Sr 2 Mg 12 Si 7 are energetically unstable. • Stability of Ba 2 Mg 12 Si 7 is a tender subject. -- Abstract: In order to evaluate the relative stability of A 2 Mg 4 Si 3 , A 2 Mg 12 Si 7 , and AMgSi (A = Ca, Sr, and Ba) in the A 2 Si–Mg 2 Si system, electronic energy changes in the formation of these compounds were calculated using a density-functional theory with the Perdew–Wang generalized gradient approximations. It was found that (1) AMgSi’s are quite stable compared to equi-molar mixture of A 2 Si and Mg 2 Si, (2) Ba 2 Mg 4 Si 3 and Sr 2 Mg 4 Si 3 are also stable, (3) Ca 2 Mg 4 Si 3 and Ca 2 Mg 12 Si 7 are less stable than the mixture of CaMgSi and Mg 2 Si, and (4) Stability of Ba 2 Mg 12 Si 7 is a tender subject and Sr 2 Mg 12 Si 7 is energetically unstable compared to the mixture of Sr 2 Mg 4 Si 3 (or, SrMgSi) and Mg 2 Si. The presence of Sr 2 Mg 12 Si 7 may be due to the vibrational and/or configurational entropy, which are not treated in the present study. From the calculated electronic densities of state, complex compounds of SrMgSi and Mg 2 Si have both p-type and n-type character, depending on the ratio of SrMgSi and Mg 2 Si in that compound

  8. Exploring the island of inversion with the d({sup 30}Mg,p){sup 31}Mg reaction

    Energy Technology Data Exchange (ETDEWEB)

    Bildstein, Vinzenz

    2010-12-07

    In this thesis the results of a d({sup 30}Mg,p){sup 31}Mg experiment at REX-ISOLDE are presented. {sup 31}Mg is located directly on the border of the so-called ''Island of Inversion'', a region of the nuclear chart around {sup 32}Mg where deformed intruder states of the fp shell form the ground states of the nuclei instead of the normal spherical states of the sd shell. A recent experiment has shown the ground state of {sup 31}Mg to be a 1/2{sup +} state and indicates more than 90% intruder configuration. The question whether the low-lying excited states of {sup 31}Mg are deformed intruder states as well or rather spherical states from the sd shell, indicating shape coexistence, is still open. The d({sup 30}Mg,p) {sup 31}Mg reaction is thus a good tool to gain more insight into the nature of the Island of Inversion. In the framework of this thesis the angular distribution of protons was measured for the second excited state at 221 keV in coincidence with de-excitation {gamma}-rays. The angular distribution was compared to DWBA calculations for different transferred orbital momenta, identifying the state for the first time as an l=1 state. The experiment was performed with the new charged particle detector setup T-REX. The setup is optimized for transfer reactions with radioactive beams in inverse kinematics. T-REX was developed, built, installed, and used for this first one neutron transfer experiment in the context of this thesis. The T-REX setup consists of {delta}E-E{sub Rest} telescopes made out of position sensitive silicon detectors that cover almost 4{pi} of the solid angle and can be combined with the MINIBALL {gamma}-ray detector array. It has a large solid angle for the detection and identification of the light recoils from transfer reactions. T-REX allows in combination with the MINIBALL Germanium detector array the tagging of the excited states by their characteristic {gamma}-rays. The combination of T-REX and MINIBALL achieves an

  9. Mg Incorporation Efficiency in Pulsed MOCVD of N-Polar GaN:Mg

    Science.gov (United States)

    Marini, Jonathan; Mahaboob, Isra; Hogan, Kasey; Novak, Steve; Bell, L. D.; Shahedipour-Sandvik, F.

    2017-10-01

    We report on the effect of growth polarity and pulsed or δ -doped growth mode on impurity incorporation in metalorganic chemical vapor deposition-grown GaN. In Ga-polar orientation, up to 12× enhancement in Mg concentration for given Mg flow rate is observed, resulting in enhanced p-type conductivity for these samples. In contrast, this enhancement effect is greatly diminished for N-polar samples, falling off with increasing Mg flow and showing maximum enhancement of 2.7× at 30 nmol/min Mg flow. At higher Mg flow rates, Mg incorporation at normal levels did not correspond to p-type conductivity, which may be due to Mg incorporation at nonacceptor sites. Concentrations of C, O, and Si were also investigated, revealing dependence on Mg flow in N-polar pulsed samples. Carbon incorporation was found to decrease with increasing Mg flow, and oxygen incorporation was found to remain high across varied Mg flow. These effects combine to result in N-polar samples that are not p-type when using the pulsed growth mode.

  10. Different annealing temperature suitable for different Mg doped P-GaN

    Science.gov (United States)

    Liu, S. T.; Yang, J.; Zhao, D. G.; Jiang, D. S.; Liang, F.; Chen, P.; Zhu, J. J.; Liu, Z. S.; Li, X.; Liu, W.; Zhang, L. Q.; Long, H.; Li, M.

    2017-04-01

    In this work, epitaxial GaN with different Mg doping concentration annealed at different temperature is investigated. Through Hall and PL spectra measurement we found that when Mg doping concentration is different, different annealing temperature is needed for obtaining the best p-type conduction of GaN, and this difference comes from the different influence of annealing on compensated donors. For ultra-heavily Mg doped sample, the process of Mg related donors transferring to non-radiative recombination centers is dominated, so the performance of P-GaN deteriorates with temperature increase. But for low Mg doped sample, the process of Mg related donors transfer to non-raditive recombination is weak compare to the Mg acceptor activation, so along the annealing temperature increase the performance GaN gets better.

  11. Thermoelectric power of PrMg3

    Science.gov (United States)

    Isikawa, Yosikazu; Somiya, Kazuya; Koyanagi, Huruto; Mizushima, Toshio; Kuwai, Tomohiko; Tayama, Takashi

    2010-01-01

    PrMg3 is supposed to be one of the strongly correlated electron systems originated from the hybridization between the Pr 4f and conduction electrons, because the gigantic electronic specific heat coefficient C/T was observed at low temperatures. However, a typical behaviour of - ln T dependence was not observed in the temperature dependence of the electrical resistivity. The thermoelectric power S is a powerful tool to investigate the density of states at the Fermi energy. We measured carefully the thermoelectric power of PrMg3 in the temperature range between 2 and 300 K. S is extremely small, ranged within ±1 μV/K over the whole temperature. The value of S/T at low temperature limit was also significantly smaller than expected from the specific heat results. We therefore conclude that the density of state at the Fermi level is not enhanced in PrMg3.

  12. Thermoelectric power of PrMg3

    International Nuclear Information System (INIS)

    Isikawa, Yosikazu; Somiya, Kazuya; Koyanagi, Huruto; Mizushima, Toshio; Kuwai, Tomohiko; Tayama, Takashi

    2010-01-01

    PrMg 3 is supposed to be one of the strongly correlated electron systems originated from the hybridization between the Pr 4f and conduction electrons, because the gigantic electronic specific heat coefficient C/T was observed at low temperatures. However, a typical behaviour of - ln T dependence was not observed in the temperature dependence of the electrical resistivity. The thermoelectric power S is a powerful tool to investigate the density of states at the Fermi energy. We measured carefully the thermoelectric power of PrMg 3 in the temperature range between 2 and 300 K. S is extremely small, ranged within ±1 μV/K over the whole temperature. The value of S/T at low temperature limit was also significantly smaller than expected from the specific heat results. We therefore conclude that the density of state at the Fermi level is not enhanced in PrMg 3 .

  13. Fabrication of biodegradable Zn-Al-Mg alloy: Mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities.

    Science.gov (United States)

    Bakhsheshi-Rad, H R; Hamzah, E; Low, H T; Kasiri-Asgarani, M; Farahany, S; Akbari, E; Cho, M H

    2017-04-01

    In this work, binary Zn-0.5Al and ternary Zn-0.5Al-xMg alloys with various Mg contents were investigated as biodegradable materials for implant applications. Compared with Zn-0.5Al (single phase), Zn-0.5Al-xMg alloys consisted of the α-Zn and Mg 2 (Zn, Al) 11 with a fine lamellar structure. The results also revealed that ternary Zn-Al-Mg alloys presented higher micro-hardness value, tensile strength and corrosion resistance compared to the binary Zn-Al alloy. In addition, the tensile strength and corrosion resistance increased with increasing the Mg content in ternary alloys. The immersion tests also indicated that the corrosion rates in the following order Zn-0.5Al-0.5MgAl-0.3MgAl-0.1MgAl. The cytotoxicity tests exhibited that the Zn-0.5Al-0.5Mg alloy presents higher viability of MC3T3-E1 cell compared to the Zn-0.5Al alloy, which suggested good biocompatibility. The antibacterial activity result of both Zn-0.5Al and Zn-0.5Al-Mg alloys against Escherichia coli presented some antibacterial activity, while the Zn-0.5Al-0.5Mg significantly prohibited the growth of Escherichia coli. Thus, Zn-0.5Al-0.5Mg alloy with appropriate mechanical properties, low corrosion rate, good biocompatibility and antibacterial activities was believed to be a good candidate as a biodegradable implant material. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Mifepristone 5 mg versus 10 mg for emergency contraception: double-blind randomized clinical trial

    Directory of Open Access Journals (Sweden)

    Carbonell JL

    2015-01-01

    Full Text Available Josep Lluis Carbonell,1 Ramon Garcia,2 Adriana Gonzalez,2 Andres Breto,2 Carlos Sanchez2 1Mediterranea Medica Clinic, Valencia, Spain; 2Eusebio Hernandez Gynecology and Obstetrics Teaching Hospital, Havana, Cuba Purpose: To estimate the efficacy and safety of 5 mg and 10 mg mifepristone for emergency contraception up to 144 hours after unprotected coitus. Methods: This double-blind randomized clinical trial was carried out at Eusebio Hernandez Hospital (Havana, Cuba. A total of 2,418 women who requested emergency contraception after unprotected coitus received either 5 mg or 10 mg mifepristone. The variables for assessing efficacy were the pregnancies that occurred and the fraction of pregnancies that were prevented. Other variables assessed were the side effects of mifepristone, vaginal bleeding, and changes in the date of the following menstruation. Results: There were 15/1,206 (1.2% and 9/1,212 (0.7% pregnancies in the 5 mg and 10 mg group, respectively (P=0.107. There were 88% and 93% prevented pregnancies in the 5 mg and 10 mg group, respectively. The side effect profiles were similar in both groups. Delayed menstruation ≥7 days was experienced by 4.9% and 11.0% of subjects in the 5 mg and 10 mg group, respectively (P=0.001. There was a significant high failure rate for women weighing >75 kg in the 5 mg group. Conclusion: It would be advisable to use the 10 mg dose of mifepristone for emergency contraception as there was a trend suggesting that the failure rate of the larger dose was lower. Keywords: mifepristone, emergency contraception

  15. Laser cladding of Zr on Mg for improved corrosion properties

    International Nuclear Information System (INIS)

    Subramanian, R.; Sircar, S.; Mazumder, J.

    1989-01-01

    This paper reports the results of laser cladding of Mg-2wt%Zr, and Mg-5wt%Zr powder mixture onto magnesium. The microstructure of the laser clad was studied. From the microstructural study, the epitaxial regrowth of the clad region on the underlying substrate was observed. Martensite plates of different size were observed in transmission electron microscope for MG-2wt%Zr and Mg-5wt%Zr laser clad. The corrosion properties of the laser clad were evaluated in sea water (3.5% NaCl). The position of the laser claddings in the galvanic series of metals in sea water, the anodic polarization characteristics of the laser claddings and the protective nature and the stability of the passivating film formed have been determined. The formation of pits on the surface of the laser clad subjected to corrosion is reported. The corrosion properties of the laser claddings are compared with that of the commercially used magnesium alloy AZ91B

  16. Comparison of the effects of esomeprazole 40 mg, rabeprazole 20 mg, lansoprazole 30 mg, and pantoprazole 40 mg on intragastrıc pH in extensive metabolizer patients with gastroesophageal reflux disease.

    Science.gov (United States)

    Çelebi, Altay; Aydın, Dinçer; Kocaman, Orhan; Konduk, Buğra Tolga; Şentürk, Ömer; Hülagü, Sadetin

    2016-09-01

    Studies on the therapeutic efficacy of proton pump inhibitors (PPIs) in patients with gastroesophageal reflux disease (GERD) have been recently published. In most of these studies, comparison of only two PPIs have been made. There are few studies on the comparison of four or more PPIs. We aimed to compare the acid inhibitory effects of esomeprazole 40 mg, rabeprazole 20 mg, lansoprazole 30 mg, and pantoprazole 40 mg on days 1 and 5 of treatment in patients with GERD, who were extensive metabolizers in regard to the CYP2C19 genotype. Helicobacter pylori-negative with typical symptoms of GERD patients were randomly divided into four treatment groups. Efficacy analysis on days 1 and 5 were performed on the four groups which comprised 10 (esomeprazole), 11 (rabeprazole), 10 (lansoprazole), and 10 (pantoprazole) patients. On day 1 of PPI treatment, the mean percentage of time with intragastric Ph>4 were 54%, 58%, 60%, and 35% for the groups, respectively, and on day 5, these values were 67%, 60%, 68%, and 59%, respectively. Esomeprazole, rabeprazole, and lansoprazole were found to be superior to pantoprazole on the first day of treatment. Pantoprazole is a less potent proton pump inhibitor than the other PPIs tested on the first day of treatment. When the time needed to raise the intragatric pH to over 4 was evaluated, esomeprazole was found to have the most rapid action, followed by lansoprazole and rabeprazole.

  17. Suppression of Mg propagation into subsequent layers grown by MOCVD

    Science.gov (United States)

    Agarwal, Anchal; Tahhan, Maher; Mates, Tom; Keller, Stacia; Mishra, Umesh

    2017-01-01

    Low temperature (LT) flow modulation epitaxy (FME) or "pulsed" growth was successfully used to prevent magnesium from Metalorganic Chemical Vapor Deposition (MOCVD) grown p-GaN:Mg layers riding into subsequently deposited n-type layers. Mg concentration in the subsequent layers was lowered from ˜1 × 1018 cm-3 for a medium temperature growth at 950 °C to ˜1 × 1016 cm-3 for a low temperature growth at 700 °C via FME. The slope of the Mg concentration drop in the 700 °C FME sample was 20 nm/dec—the lowest ever demonstrated by MOCVD. For growth on Mg implanted GaN layers, the drop for a medium temperature regrowth at 950 °C was ˜10 nm/dec compared to >120 nm/dec for a high temperature regrowth at 1150 °C. This drop-rate obtained at 950 °C or lower was maintained even when the growth temperature in the following layers was raised to 1150 °C. A controlled silicon doping series using LT FME was also demonstrated with the lowest and highest achieved doping levels being 5 × 1016 cm-3 and 6 × 1019 cm-3, respectively.

  18. In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy.

    Science.gov (United States)

    Zheng, Y F; Gu, X N; Xi, Y L; Chai, D L

    2010-05-01

    Mg/Ca (1 wt.%, 5 wt.%, 10 wt.% Ca) composites were prepared from pure magnesium and calcium powders using the powder metallurgy method, aiming to enlarge the addition of Ca content without the formation of Mg(2)Ca. The microstructures, mechanical properties and cytotoxicities of Mg/Ca composite samples were investigated. The corrosion of Mg/Ca composites in Dulbecco's modified Eagle's medium (DMEM) for various immersion intervals was studied by electrochemical impedance spectroscopy measurements and environmental scanning electron microscope, with the concentrations of released Mg and Ca ions in DMEM for various immersion time intervals being measured. It was shown that the main constitutional phases were Mg and Ca, which were uniformly distributed in the Mg matrix. The ultimate tensile strength (UTS) and elongation of experimental composites decreased with increasing Ca content, and the UTS of Mg/1Ca composite was comparable with that of as-extruded Mg-1Ca alloy. The corrosion potential increased with increasing Ca content, whereas the current density and the impedance decreased. It was found that the protective surface film formed quickly at the initial immersion stage. With increasing immersion time, the surface film became compact, and the corrosion rate of Mg/Ca composites slowed down. The surface film consisted mainly of CaCO(3), MgCO(3)x3H(2)O, HA and Mg(OH)(2) after 72 h immersion in DMEM. Mg/1Ca and Mg/5Ca composite extracts had no significant toxicity (p>0.05) to L-929 cells, whereas Mg/10Ca composite extract induced approximately 40% reduced cell viability. Copyright (c) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  19. Superconducting properties of MgB2 particle impregnated with Mg-based alloys

    International Nuclear Information System (INIS)

    Shimizu, Yusuke; Matsuda, Kenji; Mizutani, Manabu; Nishimura, Katsuhiko; Kawabata, Tokimasa; Ikeno, Susumu; Hishinuma, Yoshimitsu; Aoyama, Shigeki

    2011-01-01

    The three-dimensional penetration method combined with semi-solid casting (SS-3DPC) was utilized to prepare magnesium diboride (MgB 2 ) powder composite materials with various host materials of Mg, Mg-3%Al, Mg-3%Al-1%Zn, Mg-9%Al, and Mg-9%Al-1%Zn. X-ray diffraction measurements indicated predominant peak patterns of MgB 2 and a host alloy, implying that the host material tightly bonded MgB 2 grains without melting the MgB 2 powder. This was confirmed by SEM images. Measured electrical resistivity and magnetization versus temperature showed clear signals of superconducting transition temperature of 27-38 K for all the samples cut out from the billets. Magnetic hysteresis loop observed at 5 K enabled us to estimate a critical current density (J c ) based on the extended Bean model. Additions of aluminum and zinc elements to magnesium host-matrix were found to enhance J c and increase residual resistivity (ρ 0 ) suggesting that aluminum and zinc have an effect on pinning magnetic flux flow for J c enhancement, and scattering conduction electrons for increase of ρ 0 . (author)

  20. Frovatriptan 2.5 mg plus dexketoprofen (25 mg or 37.5 mg) in menstrually related migraine. Subanalysis from a double-blind, randomized trial.

    Science.gov (United States)

    Allais, G; Bussone, G; Tullo, V; Cortelli, P; Valguarnera, F; Barbanti, P; Sette, G; D'Onofrio, F; Curone, M; Benedetto, C

    2015-01-01

    The purpose of this article is to investigate the efficacy and safety of frovatriptan plus dexketoprofen 25 or 37.5 mg (FroDex25 or FroDex37.5, respectively) compared to that of frovatriptan 2.5 mg (Frova) in menstrually related migraine (MRM). The aim of this article is to analyze a subgroup of 76 women who treated an MRM attack in this multicenter, randomized, double-blind, parallel-group study. The primary end-point was the proportion of patients who were pain free (PF) at two hours. Secondary end-points included pain-relief (PR) at two hours and 48 hours sustained pain free (SPF). PF rates at two hours were 29% under Frova, 48% under FroDex25 and 64% under FroDex37.5 (p dexketoprofen produced higher PF rates at two hours compared to Frova while maintaining efficacy at 48 hours. Tolerability profiles were comparable. © International Headache Society 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  1. Electronic structure of MgB2

    Indian Academy of Sciences (India)

    Abstract. Results of ab initio electronic structure calculations on the compound MgB2 using the. FPLAPW method employing GGA for the exchange-correlation energy are presented. Total energy minimization enables us to estimate the equilibrium volume, c/a ratio and the bulk modulus, all of which are in excellent ...

  2. Electronic structure of MgB 2

    Indian Academy of Sciences (India)

    Results of ab initio electronic structure calculations on the compound MgB2 using the FPLAPW method employing GGA for the exchange-correlation energy are presented. Total energy minimization enables us to estimate the equilibrium volume, / ratio and the bulk modulus, all of which are in excellent agreement with ...

  3. doped LiMgPO4 phosphor

    Indian Academy of Sciences (India)

    attention because of their remarkable luminescence proper- ties and .... Figure 1. (a) X-ray diffraction patterns of LiMgPO4:Tb3+ phosphor and (b) standard data. ICDD file. .... ground signal which affects the signal to noise ratio [17]. MDD was ...

  4. Catalytically Enhanced Hydrogen Sorption in Mg-MgH2 by Coupling Vanadium-Based Catalyst and Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    Atikah Kadri

    2015-06-01

    Full Text Available Mg (MgH2-based composites, using carbon nanotubes (CNTs and pre-synthesized vanadium-based complex (VCat as the catalysts, were prepared by high-energy ball milling technique. The synergistic effect of coupling CNTs and VCat in MgH2 was observed for an ultra-fast absorption rate of 6.50 wt. % of hydrogen per minute and 6.50 wt. % of hydrogen release in 10 min at 200 °C and 300 °C, respectively. The temperature programmed desorption (TPD results reveal that coupling VCat and CNTs reduces both peak and onset temperatures by more than 60 °C and 114 °C, respectively. In addition, the presence of both VCat and CNTs reduces the enthalpy and entropy of desorption of about 7 kJ/mol H2 and 11 J/mol H2·K, respectively, as compared to those of the commercial MgH2, which ascribe to the decrease of desorption temperature. From the study of the effect of CNTs milling time, it is shown that partially destroyed CNTs (shorter milling time are better to enhance the hydrogen sorption performance.

  5. Theoretical and experimental study of the intrinsic physical properties of the Mg-MgH{sub 2} system

    Energy Technology Data Exchange (ETDEWEB)

    Puszkiel, Julian A.; Gervasoni, Juana L. [Centro Atomico Bariloche (CAB) - Instituto Balseiro (IB) - Comision Nacional de Energia Atomica (CNEA), Av. Bustillo km 9.5, R8402 AGP S.C. de Bariloche (Argentina)

    2010-06-15

    Due to the fundamental problems of energy source limitations and environmental pollution, hydrogen has become an attractive clean energy source for the future. Despite the fact that the incentive to switch to a hydrogen economy has increased, there are many problems which must be solved. One of the main unsolved issues is hydrogen storage. Among the potential materials to store hydrogen in a safe way, Mg has drawn interest owing to its high hydrogen capacity (7.6 wt%), light weight and low cost. In order to improve the hydrogen capacity of potential storage materials such as Mg, it is important to understand the site preferences of hydrogen atoms in the metal. Such behavior depends mainly on the screening charge density ({delta}n(r)) of the system proton-metallic host, from which all the physical macroscopic properties (viz. V{sub H}, {delta}H{sub S}, B, etc.) and IDOS are determined. In the present work we study the interaction between a proton and Mg as host metal via ab initio calculations, using the Jellium model, based on the density-functional theory (DFT). The macroscopic properties are determined and compared with experimental results and values found in the bibliography. Furthermore, in order to obtain information about the electronic distribution of hydrogen and the nature of the Mg-H bonding, the IDOS is described. (author)

  6. On heavy carbon doping of MgB2

    International Nuclear Information System (INIS)

    Kasinathan, Deepa; Lee, K.-W.; Pickett, W.E.

    2005-01-01

    Heavy carbon doping of MgB 2 is studied by first principles electronic structure studies of two types, an ordered supercell (Mg(B 1-x C x ) 2 , x 0.0833) and also the coherent potential approximation method that incorporates effects of B-C disorder. For the ordered model, the twofold degenerate σ-bands that are the basis of the high temperature superconductivity are split by 60 meV (i.e. 7 meV/% C) and the σ Fermi cylinders contain 0.070 holes/cell, compared to 0.11 for MgB 2 . A virtual crystal treatment tends to overestimate the rate at which σ holes are filled by substitutional carbon. The coherent potential approximation (CPA) calculations give the same rate of band filling as the supercell method. The occupied local density of states of C is almost identical to that of B in the upper 2 eV of the valence bands, but in the range -8 eV to -2 eV, C has a considerably larger density of states. The calculations indicate that the σ Fermi surface cylinders pinch off at the zone center only above the maximum C concentration x ∼ 0.10. These results indicate that Mg(B 1-x C x ) 2 as well as Mg 1-x Al x B 2 is a good system in which to study the evolution of the unusual electron-phonon coupling character and strength as the crucial σ hole states are filled

  7. Preliminary study of the characteristics of a high Mg containing Al-Mg-Si alloy

    International Nuclear Information System (INIS)

    Yan, F; McKay, B J; Fan, Z; Chen, M F

    2012-01-01

    An Al-20Mg-4Si high Mg containing alloy has been produced and its characteristics investigated. The as-cast alloy revealed primary Mg 2 Si particles evenly distributed throughout an α-Al matrix with a β-Al 3 Mg 2 fully divorced eutectic phase observed in interdendritic regions. The Mg 2 Si particles displayed octahedral, truncated octahedral, and hopper morphologies. Additions of Sb, Ti and Zr had a refining influence reducing the size of the Mg 2 Si from 52 ± 4 μm to 25 ± 0.1 μm, 35 ± 1 μm and 34 ± 1 μm respectively. HPDC tensile test samples could be produced with a 0.6 wt.% Mn addition which prevented die soldering. Solution heating for 1 hr was found to dissolve the majority of the Al 3 Mg 2 eutectic phase with no evidence of any effect on the primary Mg 2 Si. Preliminary results indicate that the heat treatment has a beneficial effect on the elongation and the UTS.

  8. Investigation of the 24Mg(d, p)25Mg reaction

    NARCIS (Netherlands)

    Meurders, F.; Korte, G. de

    1975-01-01

    Abstract Proton angular distributions from the 24Mg(d, p)25Mg reaction at Ed = 12.0 MeV have been measured with a split-pole magnetic spectrograph for Ex < 6 MeV at an average resolution (FWHM) of 7 keV. New ln values have been determined for three levels. A DWBA analysis yielded spectroscopic

  9. Investigation of the 26Mg(d, p)27Mg reaction

    NARCIS (Netherlands)

    Meurders, F.; Steld, A. van der

    1974-01-01

    The angular distributions of 31 protons groups from the 26Mg(d, p)27Mg reaction have been measured at Ed = 12.0 MeV with a split-pole magnetic spectrograph. Excitation energies have been determined for 29 bound states. Three new levels have been found. A DWBA analysis yields ln values for 19 levels;

  10. Respiratory outcomes following 100 mg/kg v. 200 mg/kg of poractant ...

    African Journals Online (AJOL)

    In keeping with current evidence, the initial dose of poractant alpha was increased from 100 mg/kg to 200 mg/kg. e outcomes of newborns requiring treatment with surfactant before and aer this change were reviewed. Methods. Electronic clinical records were reviewed of infants admitted to ACH who received surfactant ...

  11. Mg/Ca ratio in fertilization and agricultural soils, Mg percent of liming ...

    African Journals Online (AJOL)

    Strong increase of NPK (nitrogen, phosphorus and potassium) in mineral fertilization (fm) included relative delay in Mg supplementation and dilution in plant available silicon (Si) via recycled nutrients (rcl). (Silicon is not included in essential fertilizers in Finland.) Methods: We have assessed old data on Ca and Mg in ...

  12. Decay of a Jπ=36+ Resonance in the 24Mg+24Mg Reaction

    International Nuclear Information System (INIS)

    Salsac, M.-D.; Haas, F.; Courtin, S.

    2005-01-01

    For the 24 Mg+ 24 Mg reaction, striking narrow and correlated resonance structures have been observed previously in the excitation functions of the elastic and low-lying channels. In our study we have decided to focus on the resonance at E C M =45.7 MeV, which is known to have J π =36 + . Despite the very high excitation energy(∼60 MeV) in the 48 Cr composite system, this resonance has a narrow total width of 170 keV. To determine precisely which states in the inelastic 24 Mg channels carry away the resonance flux, an experiment, on the 24 Mg + 24 Mg reaction at energies On and OFF resonance, has been performed at the Legnaro Tandem accelerator using the Prisma fragment spectrometer associated with the CLARA γ array

  13. Variation of equation of state parameters in the Mg2(Si 1-xSnx) alloys

    KAUST Repository

    Pulikkotil, Jiji Thomas Joseph; Alshareef, Husam N.; Schwingenschlö gl, Udo

    2010-01-01

    Thermoelectric performance peaks up for intermediate Mg2(Si 1-x:Snx) alloys, but not for isomorphic and isoelectronic Mg2(Si1-xGex) alloys. A comparative study of the equation of state parameters is performed using density functional theory, Green

  14. Mg/O2 Battery Based on the Magnesium-Aluminum Chloride Complex (MACC) Electrolyte

    DEFF Research Database (Denmark)

    Vardar, Galin; Smith, Jeffrey G.; Thomson, Travis

    2016-01-01

    Mg/O2 cells employing a MgCl2/AlCl3/DME (MACC/DME) electrolyte are cycled and compared to cells with modified Grignard electrolytes, showing that performance of magnesium/oxygen batteries depends strongly on electrolyte composition. Discharge capacity is far greater for MACC/DME-based cells, whil...

  15. Predictive calculation of phase formation in Al-rich Al-Zn-Mg-Cu-Sc-Zr alloys using a thermodynamic Mg-alloy database

    International Nuclear Information System (INIS)

    Groebner, J.; Rokhlin, L.L.; Dobatkina, T.V.; Schmid-Fetzer, R.

    2007-01-01

    Three series of Al-rich alloys in the system Al-Zn-Mg-Cu-Sc-Zr and the subsystems Al-Zn-Mg-Cu-Sc and Al-Zn-Mg-Sc were studied by thermodynamic calculations. Phase formation was compared with experimental data obtained by DTA and microstructural analysis. Calculated phase diagrams, phase amount charts and enthalpy charts together with non-equilibrium calculations under Scheil conditions reveal significant details of the complex phase formation. This enables consistent and correct interpretation of thermal analysis data. Especially the interpretation of liquidus temperature and primary phase is prone to be wrong without using this tool of computational thermodynamics. All data are predictions from a thermodynamic database developed for Mg-alloys and not a specialized Al-alloy database. That provides support for a reasonable application of this database for advanced Mg-alloys beyond the conventional composition ranges

  16. Predictive calculation of phase formation in Al-rich Al-Zn-Mg-Cu-Sc-Zr alloys using a thermodynamic Mg-alloy database

    Energy Technology Data Exchange (ETDEWEB)

    Groebner, J. [Institute of Metallurgy, Clausthal University of Technology, Robert-Koch Strasse 42, D-38678 Clausthal-Zellerfeld (Germany); Rokhlin, L.L. [Baikov Institute of Metallurgy and Materials Science, Leninsky prosp. 49, 119991 GSP-1, Moscow (Russian Federation); Dobatkina, T.V. [Baikov Institute of Metallurgy and Materials Science, Leninsky prosp. 49, 119991 GSP-1, Moscow (Russian Federation); Schmid-Fetzer, R. [Institute of Metallurgy, Clausthal University of Technology, Robert-Koch Strasse 42, D-38678 Clausthal-Zellerfeld (Germany)]. E-mail: schmid-fetzer@tu-clausthal.de

    2007-05-16

    Three series of Al-rich alloys in the system Al-Zn-Mg-Cu-Sc-Zr and the subsystems Al-Zn-Mg-Cu-Sc and Al-Zn-Mg-Sc were studied by thermodynamic calculations. Phase formation was compared with experimental data obtained by DTA and microstructural analysis. Calculated phase diagrams, phase amount charts and enthalpy charts together with non-equilibrium calculations under Scheil conditions reveal significant details of the complex phase formation. This enables consistent and correct interpretation of thermal analysis data. Especially the interpretation of liquidus temperature and primary phase is prone to be wrong without using this tool of computational thermodynamics. All data are predictions from a thermodynamic database developed for Mg-alloys and not a specialized Al-alloy database. That provides support for a reasonable application of this database for advanced Mg-alloys beyond the conventional composition ranges.

  17. Observation of pseudogap in MgB2

    Science.gov (United States)

    Patil, S.; Medicherla, V. R. R.; Ali, Khadiza; Singh, R. S.; Manfrinetti, P.; Wrubl, F.; Dhar, S. K.; Maiti, Kalobaran

    2017-11-01

    We investigate the electronic structure of a specially prepared highly dense conventional high temperature superconductor, MgB2, employing high resolution photoemission spectroscopy. The spectral evolution close to the Fermi energy is commensurate to BCS descriptions as expected. However, the spectra in the wider energy range reveal the emergence of a pseudogap much above the superconducting transition temperature indicating an apparent departure from the BCS scenario. The energy scale of the pseudogap is comparable to the energy of the E2g phonon mode responsible for superconductivity in MgB2 and the pseudogap can be attributed to the effect of electron-phonon coupling on the electronic structure. These results reveal a scenario of the emergence of the superconducting gap within an electron-phonon coupling induced pseudogap and have significant implications in the study of high temperature superconductors.

  18. Electrochemical deposition of Mg(OH)2/GO composite films for corrosion protection of magnesium alloys

    OpenAIRE

    Fengxia Wu; Jun Liang; Weixue Li

    2015-01-01

    Mg(OH)2/graphene oxide (GO) composite film was electrochemical deposited on AZ91D magnesium alloys at constant potential. The characteristics of the Mg(OH)2/GO composite film were investigated by scanning electron microscope (SEM), energy-dispersive X-ray spectrometry (EDS), X-ray diffractometer (XRD) and Raman spectroscopy. It was shown that the flaky GO randomly distributed in the composite film. Compared with the Mg(OH)2 film, the Mg(OH)2/GO composite film exhibited more uniform and compac...

  19. Mg doping and its effect on the semipolar GaN(1122) growth kinetics

    International Nuclear Information System (INIS)

    Lahourcade, L.; Wirthmueller, A.; Monroy, E.; Pernot, J.; Chauvat, M. P.; Ruterana, P.; Laufer, A.; Eickhoff, M.

    2009-01-01

    We report the effect of Mg doping on the growth kinetics of semipolar GaN(1122) synthesized by plasma-assisted molecular-beam epitaxy. Mg tends to segregate on the surface, inhibiting the formation of the self-regulated Ga film which is used as a surfactant for the growth of undoped and Si-doped GaN(1122). We observe an enhancement of Mg incorporation in GaN(1122) compared to GaN(0001). Typical structural defects or polarity inversion domains found in Mg-doped GaN(0001) were not observed for the semipolar films investigated in the present study.

  20. SIMS and Raman studies of Mg-doped InN

    International Nuclear Information System (INIS)

    Davydov, V.Yu.; Kitaev, Yu.E.; Smirnov, A.N.; Lundina, E.Y.; Klochikhin, A.A.; Smirnov, M.B.; Lu, Hai; Schaff, William J.; Lee, H.M.; Lin, H.W.; Hong, Y.L.; Gwo, S.

    2008-01-01

    Raman and SIMS studies of Mg-doped InN films with a Mg content from N Mg =3.3 x 10 19 to 5.5 x 10 21 cm -3 are reported. Lattice dynamics of hexagonal InN with substitutional impurities and vacancies has been investigated theoretically and calculated Raman spectra were compared with experimental ones. It is concluded that Raman spectroscopy is a good tool for quantitative characterization of Mg-doped InN. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  1. Formation of nanocrystalline MgB sub 2 under high pressure

    CERN Document Server

    Sun, L; Kikegawa, T; Cao, L; Zhan, Z; Wu, Q; Wu, X; Wang, W

    2002-01-01

    The microstructural features of MgB sub 2 at ambient pressure and high pressure have been investigated by means of in situ synchrotron radiation x-ray diffraction and transmission electron microscopy (TEM). The x-ray diffraction measurements indicated that nanocrystalline MgB sub 2 formed in the pressure range of 26.3-30.2 GPa. TEM investigations reveal complex structure domains with evident lattice distortion in the relevant samples. The superconductivity of nanocrystalline MgB sub 2 was measured and compared with that of the starting sample of MgB sub 2.

  2. Randomised clinical trial: daily pantoprazole magnesium 40 mg vs. esomeprazole 40 mg for gastro-oesophageal reflux disease, assessed by endoscopy and symptoms.

    Science.gov (United States)

    Moraes-Filho, J P; Pedroso, M; Quigley, E M M

    2014-01-01

    Pantoprazole magnesium (pantoprazole-Mg) may display extended inhibition of the proton pump with the potential for improved clinical efficacy in gastro-oesophageal reflux disease (GERD). To compare the efficacy of pantoprazole-Mg and esomeprazole in GERD. Gastro-oesophageal reflux disease (Los Angeles grades A-D) patients were randomised to 4 weeks of treatment with pantoprazole-Mg (n = 290) or esomeprazole (n = 288), both 40 mg once daily, in this multicentre (14 Brazilian sites in 9 cities), double-blind study, with an additional 4 weeks' treatment in nonresponding patients. Severity of oesophagitis (at endoscopy) and GERD-related symptoms (ReQuest-GI) were assessed. The primary end point was the proportion of patients in complete remission (ReQuest-GI score <1.73 plus endoscopic healing) at week 4. Complete remission occurred in 61% of patients in each treatment group at 4 weeks (primary endpoint) and in 81% and 79% of patients in the pantoprazole-Mg and esomeprazole groups at 8 weeks, with no significant differences. Mucosal healing rates were high and not significantly different. At 8 weeks, symptom relief with pantoprazole-Mg was significantly greater than that with esomeprazole (91.6% vs. 86.0%, P = 0.0370) because of continued improvement in symptoms with pantoprazole-Mg from week 4 to week 8 (P = 0.0206). Pantoprazole-Mg 40 mg was at least as effective as esomeprazole 40 mg for complete remission and the mucosal healing rate was high. Symptom relief with pantoprazole-Mg continued to improve from 4 to 8 weeks and was greater than that with esomeprazole at week 8, suggesting an extended period of treatment effect (ClinicalTrials.gov identifier: NCT01132638). © 2013 John Wiley & Sons Ltd.

  3. Biocompatibility Assessment of Novel Bioresorbable Alloys Mg-Zn-Se and Mg-Zn-Cu for Endovascular Applications: In- Vitro Studies.

    Science.gov (United States)

    Persaud-Sharma, Dharam; Budiansky, Noah; McGoron, Anthony J

    2013-01-01

    Previous studies have shown that using biodegradable magnesium alloys such as Mg-Zn and Mg-Zn-Al possess the appropriate mechanical properties and biocompatibility to serve in a multitude of biological applications ranging from endovascular to orthopedic and fixation devices. The objective of this study was to evaluate the biocompatibility of novel as-cast magnesium alloys Mg-1Zn-1Cu wt.% and Mg-1Zn-1Se wt.% as potential implantable biomedical materials, and compare their biologically effective properties to a binary Mg-Zn alloy. The cytotoxicity of these experimental alloys was evaluated using a tetrazolium based- MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) assay and a lactate dehydrogenase membrane integrity assay (LDH). The MTS assay was performed on extract solutions obtained from a 30-day period of alloy immersion and agitation in simulated body fluid to evaluate the major degradation products eluted from the alloy materials. Human foreskin fibroblast cell growth on the experimental magnesium alloys was evaluated for a 72 hour period, and cell death was quantified by measuring lactate dehydrogenase concentrations. Both Mg-Zn-Se and Mg-Zn-Cu alloys exhibit low cytotoxicity levels which are suitable for biomaterial applications. The Mg-Zn-Cu alloy was found to completely degrade within 72 hours, resulting in lower human foreskin fibroblast cell viability. The Mg-Zn-Se alloy was shown to be less cytotoxic than both the Mg-Zn-Cu and Mg-Zn alloys.

  4. Mg II Line Variation of 32 Cygni

    Directory of Open Access Journals (Sweden)

    Young Woon Kang

    1992-12-01

    Full Text Available The Mg II lines have been extracted from the IUE archival spectra of 32 Cygni to investigate the effect of the atmospheric eclipse. The UV light curve has been reduced from the continuum flux at the center wavelength of 2807.5 Å in the IUE spectra. The equivalent width of the Mg II k absoption line has been measured for each spectra. The results of the light variation and flux tracing of the absorption line at the vicinity of the primary eclipse confirmed the atmospheric eclipse. The atmospheric effect lasted until the phase 0.06 in the absorptin line tracing, while it lasted until the phase 0.02 in the UV light curve, respectively.

  5. Proteome of Salmonella enterica serotype Tyhimurium Grown in Low Mg2+/pH Medium

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Liang; Ansong, Charles; Smallwood, Heather S.; Rommereim, Leah M.; McDermott, Jason E.; Brewer, Heather M.; Norbeck, Angela D.; Taylor, Ronald C.; Gustin, Jean K.; Heffron, Fred; Smith, Richard D.; Adkins, Joshua N.

    2009-09-04

    To determine the impact of a low Mg2+/pH defined growth medium (MgM) on the proteome of Salmonella enterica serotype Typhimurium, we cultured S. Typhimurium cells in the medium under two different conditions termed MgM Shock and MgM Dilution and then comparatively analyzed the bacterial cells harvested from these conditions by a global proteomic approach. Proteomic results showed that MgM Shock and MgM Dilution differentially affected the S. Typhimurium proteome. MgM Shock induced a group of proteins whose induction usually occurred at low O2 level, while MgM Dilution induced those related to the type III secretion system (T3SS) of Salmonella Pathogenicity Island 2 (SPI2) and those involved in thiamine or biotin biosynthesis. The metabolic state of the S. Typhimurium cells grown under MgM Shock condition also differed significantly from that under MgM Dilution condition. Western blot analysis not only confirmed the proteomic results, but also showed that the abundances of SPI2-T3SS proteins SsaQ and SseE and biotin biosynthesis proteins BioB and BioD increased after S. Typhimurium infection of RAW 264.7 macrophages. Deletion of the gene encoding BioB reduced the bacterial ability to replicate inside the macrophages, suggesting a biotin-limited environment encountered by S. Typhimurium within RAW 264.7 macrophages.

  6. Elastic and Plastic Behavior of an Ultrafine-Grained Mg Reinforced with BN Nanoparticles

    Science.gov (United States)

    Trojanová, Zuzanka; Dash, Khushbu; Máthis, Kristián; Lukáč, Pavel; Kasakewitsch, Alla

    2018-04-01

    Pure microcrystalline magnesium (µMg) was reinforced with hexagonal boron nitride (hBN) nanoparticles and was fabricated by powder metallurgy process followed by hot extrusion. For comparison pure magnesium powder was consolidated by hot extrusion too. Both materials exhibited a significant fiber texture. Mg-hBN nanocomposites (nc) and pure Mg specimens were deformed between room temperature and 300 °C under tension and compression mode. The yield strength and ultimate tensile and compression strength as well as characteristic stresses were evaluated and reported. The tensile and compressive strengths of Mg-hBN nc are quiet superior in values compared to monolithic counterpart as well as Mg alloys. The compressive yield strength of µMg was recorded as 90 MPa, whereas the Mg-hBN nancomposite shows 125 MPa at 200 °C. The tensile yield strength of µMg was computed as 67 MPa which is quite lower as compared to Mg-hBN nanocomposite's value which was recorded as 157 MPa at 200 °C. Under tensile stress the true stress-strain curves are flat in nature, whereas the stress-strain curves observed in compression at temperatures up to 100 °C exhibited small local maxima at the onset of deformation followed by a significant work hardening.

  7. Mg,Ca-ATPase activity under irradiation

    International Nuclear Information System (INIS)

    Ladutin, V.V.; Orlova, V.V.; Lob, P.A.; Gerasiminko, I.V.; Mack, E.I.

    2003-01-01

    Full text: The influence of different doses irradiation at the Mg,Ca-ATPase activity at the rat brain has been investigated. The analyses were made at the apparatus of LKB and Carl-Ceis-Jena firm with help of reagents of Sigma and Boehringer firm. Rats decapitated after 1, 3, 6, 24 and 48 h after action of irradiation. Dose 0.206 C/kg. Erythrocytes. 1 and 3h after irradiation influence- decrease of Mg,Ca-ATPase activity to 86-87% relatively control level, 24 and 48 h - increase of activity to the control level. Dose 0.312 C/kg. Large hemispheres. 1h - decrease of ATPase activity to 90% relatively control, 3h - increase to control level, 24h - fall to 86%, after 48h small increase to 93% relatively control. Dose 9.287 C/kg. Large hemispheres. 1h - sharp fall of Mg, Ca-ATPase activity to 67 % relatively control, increase of activity to 96% after 3h and sharp fall of activity to 64% 6h after action of irradiation. Dose 9.287 C/kg. Cerebellum. 1h - sharp decrease of ATPase activity to 80%. After 3h -sharp increase to 160% relatively control level and sharp fall of ATPase activity to 47% relatively control after 6h. The mechanism of radiation pathology of active ion transport has been discussed

  8. Interstitial Fe in MgO

    CERN Document Server

    Mølholt, T E; Gunnlaugsson, H P; Svane, A; Masenda, H; Naidoo, D; Bharuth-Ram, K; Fanciulli, M; Gislason, H P; Johnston, K; Langouche, G; Ólafsson, S; Sielemann, R; Weyer, G

    2014-01-01

    Isolated Fe-57 atoms were studied in MgO single-crystals by emission Mossbauer spectroscopy following implantation of Mn-57 decaying to Fe-57. Four Mossbauer spectral components were found corresponding to different Fe lattice positions and/or charge states. Two components represent Fe atoms substituting Mg as Fe2+ and Fe3+, respectively; a third component is due to Fe in a strongly implantation-induced disturbed region. The fourth component, which is the focus of this paper, can be assigned to Fe at an interstitial site. Comparison of its measured isomer shift with ab initio calculations suggests that the interstitial Fe is located on, or close to, the face of the rock-salt MgO structure. To harmonize such an assignment with the measured near-zero quadrupole interaction a local motion process (cage motion) of the Fe has to be stipulated. The relation of such a local motion as a starting point for long range diffusion is discussed.

  9. Electrochemical deposition of Mg(OH2/GO composite films for corrosion protection of magnesium alloys

    Directory of Open Access Journals (Sweden)

    Fengxia Wu

    2015-09-01

    Full Text Available Mg(OH2/graphene oxide (GO composite film was electrochemical deposited on AZ91D magnesium alloys at constant potential. The characteristics of the Mg(OH2/GO composite film were investigated by scanning electron microscope (SEM, energy-dispersive X-ray spectrometry (EDS, X-ray diffractometer (XRD and Raman spectroscopy. It was shown that the flaky GO randomly distributed in the composite film. Compared with the Mg(OH2 film, the Mg(OH2/GO composite film exhibited more uniform and compact structure. Potentiodynamic polarization tests revealed that the Mg(OH2/GO composite film could significantly improve the corrosion resistance of Mg(OH2 film with an obvious positive shift of corrosion potential by 0.19 V and a dramatic reduction of corrosion current density by more than one order of magnitude.

  10. Two-dimensional electron gases in MgZnO/ZnO and ZnO/MgZnO/ZnO heterostructures grown by dual ion beam sputtering

    Science.gov (United States)

    Singh, Rohit; Arif Khan, Md; Sharma, Pankaj; Than Htay, Myo; Kranti, Abhinav; Mukherjee, Shaibal

    2018-04-01

    This work reports on the formation of high-density (~1013-1014 cm-2) two-dimensional electron gas (2DEG) in ZnO-based heterostructures, grown by a dual ion beam sputtering system. We probe 2DEG in bilayer MgZnO/ZnO and capped ZnO/MgZnO/ZnO heterostructures utilizing MgZnO barrier layers with varying thickness and Mg content. The effect of the ZnO cap layer thickness on the ZnO/MgZnO/ZnO heterostructure is also studied. Hall measurements demonstrate that the addition of a 5 nm ZnO cap layer results in an enhancement of the 2DEG density by about 1.5 times compared to 1.11 × 1014 cm-2 for the uncapped bilayer heterostructure with the same 30 nm barrier thickness and 30 at.% Mg composition in the barrier layer. From the low-temperature Hall measurement, the sheet carrier concentration and mobility are both found to be independent of the temperature. The capacitance-voltage measurement suggests a carrier density of ~1020 cm-3, confined in 2DEG at the MgZnO/ZnO heterointerface. The results presented are significant for the optimization of 2DEG for the eventual realization of cost-effective and large-area MgZnO/ZnO-based high-electron-mobility transistors.

  11. Lubrication performance and mechanisms of Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxide nanoparticles as lubricant additives

    International Nuclear Information System (INIS)

    Li, Shuo; Bhushan, Bharat

    2016-01-01

    Highlights: • Mg/Al-, Zn/Al- and Zn/Mg/Al-layered double hydroxide were synthesized. • Mg/Al-LDH had superior tribological performance compared to other LDHs. • The best thermal stability of Mg/Al-LDH was responsible for its friction property. - Abstract: Solid lubricant particles are commonly used as oil additives for low friction and wear. Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxides (LDH) were synthesized by coprecipitation method. The benefits of LDH nanoparticles are that they can be synthesized using chemical methods where size and shape can be controlled, and can be modified organically to allow dispersal in fluids. The LDH nanoparticles were characterized by X-ray diffraction, scanning electron microscope, thermogravimetry, and differential scanning calorimetry. A pin-on-disk friction and wear tester was used for evaluating the friction and wear properties of LDH nanoparticles as lubricant additives. LDH nanoparticles have friction-reducing and anti-wear properties compared to oil without LDHs. Mg/Al-LDH has the best lubrication, possibly due to better thermal stability in severe conditions.

  12. Lubrication performance and mechanisms of Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxide nanoparticles as lubricant additives

    Energy Technology Data Exchange (ETDEWEB)

    Li, Shuo [School of Materials Science and Technology, China University of Geosciences (Beijing), 29 Xueyuan Road, Haidian Distract, Beijing 100083 (China); Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics (NLBB), The Ohio State University, 201 W. 19th Avenue Columbus, OH 43210-1142 (United States); Bhushan, Bharat, E-mail: bhushan.2@osu.edu [Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics (NLBB), The Ohio State University, 201 W. 19th Avenue Columbus, OH 43210-1142 (United States)

    2016-08-15

    Highlights: • Mg/Al-, Zn/Al- and Zn/Mg/Al-layered double hydroxide were synthesized. • Mg/Al-LDH had superior tribological performance compared to other LDHs. • The best thermal stability of Mg/Al-LDH was responsible for its friction property. - Abstract: Solid lubricant particles are commonly used as oil additives for low friction and wear. Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxides (LDH) were synthesized by coprecipitation method. The benefits of LDH nanoparticles are that they can be synthesized using chemical methods where size and shape can be controlled, and can be modified organically to allow dispersal in fluids. The LDH nanoparticles were characterized by X-ray diffraction, scanning electron microscope, thermogravimetry, and differential scanning calorimetry. A pin-on-disk friction and wear tester was used for evaluating the friction and wear properties of LDH nanoparticles as lubricant additives. LDH nanoparticles have friction-reducing and anti-wear properties compared to oil without LDHs. Mg/Al-LDH has the best lubrication, possibly due to better thermal stability in severe conditions.

  13. Comparison of hydrogen storage properties of pure Mg and milled ...

    Indian Academy of Sciences (India)

    Administrator

    increase the hydriding and dehydriding rates, pure Mg was ground under hydrogen atmosphere (reactive .... Hydrogen storage properties of pure Mg and milled pure Mg. 833. Figure 3. ... elongated and flat shapes via collisions with the steel.

  14. Synthesis and structural transformations of hydrotalcite-like materials Mg-Al and Zn-Al

    NARCIS (Netherlands)

    Prihod'ko, R.V.; Sychev, M.V.; Astrelin, I.M.; Erdmann, K.; Mangel, A.; Santen, van R.A.

    2001-01-01

    Mg-Al and Zn-Al hydrotalcite-like layered double hydroxides of various compositions were synthesized and characterized. A detailed comparative analysis of the structure and composition of starting and reconstructed layered double hydroxides was made

  15. Proton resonance elastic scattering of $^{30}$Mg for single particle structure of $^{31}$Mg

    CERN Multimedia

    The single particle structure of $^{31}$Mg, which is located in the so-called “island of inversion”, will be studied through measuring Isobaric Analog Resonances (IARs) of bound states of $^{31}$Mg. They are located in the high excitation energy of $^{31}$Al. We are going to determine the spectroscopic factors and angular momenta of the parent states by measuring the excitation function of the proton resonance elastic scattering around 0 degrees in the laboratory frame with around 3 MeV/nucleon $^{30}$Mg beam. The present study will reveal the shell evolution around $^{32}$Mg. In addition, the spectroscopic factor of the (7/2)$^{−}$ state which was not yet determined experimentally, may allow one to study the shape coexistence in this nucleus.

  16. Discovery of the shape coexisting 0+ state in 32Mg

    International Nuclear Information System (INIS)

    Wimmer, Kathrin

    2010-01-01

    distributions led to the first observation of the excited shape coexisting 0 + state in 32 Mg. From the cross section the spectroscopic amplitudes can be deduced and compared with shell model calculations. This allows to draw conclusions on the configuration of the populated state. (orig.)

  17. Raman-spectroscopic (Fe/Fe+Mg, CO2) and Structural studies of Mg-Fe cordierites

    International Nuclear Information System (INIS)

    Haefeker, U.

    2013-01-01

    In the course of this dissertation synthetic hexagonal and orthorhombic Mg-Fe-cordierites have been investigated with Raman-spectroscopy and XRD methods. Cordierite´s Mg- and Fe-end-members as well as their Mg-Fe solid solutions with the chemical formula (Mg, Fe 2+ ) 2 Al 4 Si 5 O 18 *nH 2 O have been synthesized. Raman-data of synthetic hydrous Mg- and Fe-cordierites have been obtained in the wavenumber-region 100-1250 cm-1 and the experimental data were then compared with the results of quantum-mechanical calculations. 86 theoretical bands could be related to specific vibrational modes of the tetrahedral and octahedral sites of the cordierite structure. Maximum and mean deviation between experimentally-derived bands and calculated modes were ±7 cm -1 for Mg-cordierite and ±19 cm -1 for Fe-cordierite. Spectra comparison revealed a trend of peak downshifting as a consequence of Fe-incorporation. The calculations now allow more accurate interpretation of the Raman spectra with respect to structural changes of cordierite, resulting from Al-Si ordering and Mg-Fe exchange. Atomic motions in cordierite have been compared with those of the structurally similar mineral beryl. Investigations of 16 H 2 O-bearing synthetic well-ordered Mg-Fe-cordierites (XFe =0-1) with micro-Raman spectroscopy revealed a linear correlation between the Fe/Mg ratio and the position of certain Raman peaks. The peaks (wave-number Mg-/Fe-cordierite) at 122/111, 262/257, 430/418, 579/571, 974/967, and 1012/1007 cm -1 were selected for a detailed deconvolution analysis . The shifts of these peaks were then plotted vs. XFe and regression of the data lead to the formulation of a set of linear equations. In addition, the effect of different H 2 O contents and the degree of Al-Si ordering on the Fe/Mg determination were also investigated. Testing the calibration against data from six well-characterized natural cordierite samples yielded excellent agreement. Existing calibration diagrams for CO 2

  18. Green emission from ZnO–MgO nanocomposite due to Mg diffusion at the interface

    International Nuclear Information System (INIS)

    Sowri Babu, K.; Ramachandra Reddy, A.; Venugopal Reddy, K.

    2015-01-01

    The origin and electronic transitions responsible for green emission observed from ZnO–MgO nanocomposite are investigated. The photoluminescence (PL) spectrum of ZnO–MgO nanocomposite annealed at 600 °C showed only a sharp and intense UV emission peak centered at 396 nm. As the annealing temperature increased from 600 °C to 1000 °C, the green emission positioned at 503 nm is emerged and its intensity enhanced gradually and reached maximum value at 900 °C and then decreased at 1000 °C. It is observed that both UV and green emission intensities are enhanced with variation of atomic ratio (Zn/Mg=1.52, 0.50, 0.30, 0.21, 0.15). Our experiments confirmed that the enhancement of green emission intensity is due to the formation of oxygen vacancies (V o ) due to Mg doping at the interface of ZnO and MgO. This experimental observation is in good agreement with the recent theoretical predictions which states that Mg doping in ZnO lowers the formation energies of oxygen vacancies (V o ) and zinc interstitials (Zn i ) significantly. PL excitation and emission spectra analysis reveals that excited state for both UV and green emissions is same and lies 0.24 eV below the conduction band of ZnO. Hence, the green emission is attributed to the transition of an electron form the shallow donor (defect level of Zn i ) to the deep acceptor (defect level of V o ). - Highlights: • It is found that the UV emission intensity from ZnO–MgO nanocomposite enhanced with increase of Mg concentration. • The intensity of the green emission is enhanced gradually as the temperature increased from 600 °C to 900 °C and then decreased at 1000 °C. • The effect of Mg concentration, MgO, strain at the interface on green emission is investigated. • These experiments confirmed that green emission is due to the oxygen vacancies created in ZnO due to the Mg doping at the interface and it is in good agreement with the theoretical predictions. • The decrease of green emission intensity is

  19. Structural and mechanical properties of ZnMgO nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Tosun, M. [Istanbul Technical University, Faculty of Mechanical Engineering, 34437, Gumussuyu, Istanbul (Turkey); Ataoglu, S. [Istanbul Technical University, Faculty of Civil Engineering, 34469, Maslak, Istanbul (Turkey); Istanbul Technical University, Earthquake Engineering and Disaster Management Institute, 34469, Maslak, Istanbul (Turkey); Arda, L., E-mail: lutfi.arda@bahcesehir.edu.tr [Bahcesehir University, Faculty of Arts and Sciences, Department of Mathematics and Computer Sciences, Ciragan Cad, Osmanpasa Mektebi Sok, 34349, Besiktas, Istanbul (Turkey); Ozturk, O.; Asikuzun, E. [Kastamonu University, Faculty of Arts and Sciences, Department of Physics, 37100, Kastamonu (Turkey); Akcan, D. [Bahcesehir University, Faculty of Arts and Sciences, Department of Mathematics and Computer Sciences, Ciragan Cad, Osmanpasa Mektebi Sok, 34349, Besiktas, Istanbul (Turkey); Cakiroglu, O. [Hasan Ali Yucel Education Faculty, Istanbul University, 34452, Beyazit, Istanbul (Turkey)

    2014-01-10

    This study reports the effect of annealing temperature on the structure and mechanical properties of Zn{sub 0.95}Mg{sub 0.05}O bulk samples by using digital Vickers microhardness tester, X-ray diffraction analysis, scanning electron microscopy and electron dispersive X-ray measurements. The samples were prepared using Zn and Mg based alkoxed by the sol–gel technique and annealed at various temperatures (500, 600, 700 and 800 °C). Vickers microhardness, elastic modulus, yield strength and fracture toughness values of Zn{sub 0.95}Mg{sub 0.05}O bulk samples were separately calculated and compared with each other. The experimental results of hardness measurements were analyzed using Meyer's law, Proportional Specimen Resistance (PSR) and Elastic/Plastic Deformation (EPD) models and Hays–Kendall (HK) approach. Finally, it was seen that HK approach is the most successful model for the microhardness analysis of these materials.

  20. Neural network potential for Al-Mg-Si alloys

    Science.gov (United States)

    Kobayashi, Ryo; Giofré, Daniele; Junge, Till; Ceriotti, Michele; Curtin, William A.

    2017-10-01

    The 6000 series Al alloys, which include a few percent of Mg and Si, are important in automotive and aviation industries because of their low weight, as compared to steels, and the fact their strength can be greatly improved through engineered precipitation. To enable atomistic-level simulations of both the processing and performance of this important alloy system, a neural network (NN) potential for the ternary Al-Mg-Si has been created. Training of the NN uses an extensive database of properties computed using first-principles density functional theory, including complex precipitate phases in this alloy. The NN potential accurately reproduces most of the pure Al properties relevant to the mechanical behavior as well as heat of solution, solute-solute, and solute-vacancy interaction energies, and formation energies of small solute clusters and precipitates that are required for modeling the early stage of precipitation and mechanical strengthening. This success not only enables future detailed studies of Al-Mg-Si but also highlights the ability of NN methods to generate useful potentials in complex alloy systems.

  1. Corrosion analysis of AlMg2 and AlMgSi using electrochemical method

    International Nuclear Information System (INIS)

    Dian A; Maman Kartaman; Rosika K; Yanlinastuti

    2014-01-01

    Corrosion test of cladding materials and structures of research reactor fuel, AlMgSi and AlMg2 have been performed in demineralized water of pH 2 and 6.7 using an electrochemical method. Corrosion phenomenon is affected by several factor such as composition and condition of solution. The purpose of this activity is to investigate the corrosion phenomena through the determination of the parameters of corrosion and polarization curve. The materials used are AlMg2 and AlMgSi alloy in circular dish shape with an area of 1 Cm"2. Preparation of the test sample is performed through several stages polishing, cleaning and drying procedures followed ASTM G3. The electrochemical method is done by measuring the open circuit potential (OCP), polarization resistance and potentiodynamic in demineralized water of pH 2 and pH 6.7 at temperature of 25°C. The results of the OCP is the corrosion potential (Ecorr) of AlMg2 and AlMgSi each of -906.1 mV and -619.8 mV at pH 2 and -868.6 and -756.7 mV at pH 6.7 mV. The results of measurements by polarization resistance technique showed that the corrosion rate of AlMg2 and AlMgSi in safe category (<2 mpy) at pH 6.7 and at pH 2 corrosion rate increased significantly, but still in the lightweight category (<20 mpy). Potentiodynamic curves showed that the passivation at pH 6.7 is very low while the passivation at pH 2 occurs within a relatively short range potential and followed events corroded. (author)

  2. A study on preparation and hydriding of β-Mg2Al3 and γ-Mg17Al12

    International Nuclear Information System (INIS)

    Hadi Suwarno

    2009-01-01

    The mechanism of the synthetic formation of β-Mg 2 Al 3 and γ-Mg 17 Al 12 has been studied. Mechanical alloying of Mg and Al powders with the atomic ratio of Mg:Al = 2:3 in toluene solution yields β-Mg 2 Al 3 compound after milling for 30 h. The γ-Mg 17 Al 12 can be formed by heating the β-Mg 2 Al 3 at 430°C under high vacuum. The measured hydrogen capacities of β-Mg 2 Al 3 and γ-Mg 17 Al 12 as hydride at 300°C are 3.2 and 4.9 wt%, respectively. Microstructure of the Mg-Al specimen shows that on hydriding at 300°C the polygonal shape of the γ-Mg 17 Al 12 changes into irregular shapes which are composed of γ-MgH 2 and Al. (author)

  3. Hydrogen absorption kinetics and structural properties of Mg85Ni10Ca5 and Mg90Ni10

    International Nuclear Information System (INIS)

    Aoki, Masakazu; Saito, Katsushi; Towata, Shin-ichi

    2005-01-01

    Mg 85 Ni 10 Ca 5 and Mg 90 Ni 10 were prepared by melting mixtures of the elements in mild steel crucibles and pouring them into copper molds. Hydrogen absorption kinetics and structural properties of the alloys were characterized by the volumetric method using a Sievert's apparatus, X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The crystallite size of Mg in Mg 85 Ni 10 Ca 5 , which is evaluated by XRD peak broadening, is about 50% smaller than that in Mg 90 Ni 10 . In addition, the nanometer-scale structure composed of Mg, Mg 2 Ni, Mg 2 Ca was observed in Mg 85 Ni 10 Ca 5 . Mg 85 Ni 10 Ca 5 shows better hydrogen absorption kinetics than Mg 90 Ni 10 in the temperature range of room temperature to 573 K. The better absorption kinetics of Mg 85 Ni 10 Ca 5 is mainly attributed to the nanometer-scale structure

  4. Effects of graphite doping on critical current density and microstructure of MgB{sub 2} bulks by an improved Mg-diffusion method

    Energy Technology Data Exchange (ETDEWEB)

    Pan, X.F. [Key Laboratory of Magnetic Levitation and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Zhao, Y. [Key Laboratory of Magnetic Levitation and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, University of New South Wales, Sydney 2052, NSW (Australia)], E-mail: yshao@home.swjtu.edu.cn; Feng, Y. [Northwest Institute for Nonferrous Metal Research, P.O. Box 51, Xi' an, Shaanxi 710016 (China); Western Superconductivity Technology Company, Xi' an (China); Yang, Y. [Key Laboratory of Magnetic Levitation and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Cheng, C.H. [Key Laboratory of Magnetic Levitation and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, University of New South Wales, Sydney 2052, NSW (Australia)

    2008-09-15

    abstract: A series of graphite-doped MgB{sub 2} bulks with high density have been successfully prepared by an improved Mg-diffusion method in ambient pressure. The effects of graphite doping on lattice parameters, T{sub c}, J{sub c} and microstructure of MgB{sub 2} have been investigated. The results show that compared to the nano-C-doped or CNTs-doped MgB{sub 2}, C is not easy to substitute B in graphite-doped MgB{sub 2}. However, at the same C content, the graphite-doped MgB{sub 2} has a higher J{sub c}. At 10 K and self-field, the J{sub c} for MgB{sub 1.985}C{sub 0.015} reaches 0.58 MA/cm{sup 2}. For the MgB{sub 1.945}C{sub 0.055}, at 5 K, 7 T and 10 K, 6 T the J{sub c} achieves 10,000 A/cm{sup 2} which is two orders of magnitude higher than that for the undoped sample. In addition to improving electron scattering and intergranular connectivity, the unreacted graphite in the graphite-doped MgB{sub 2} is proposed to be responsible to the excellent J{sub c} properties of MgB{sub 2} in high fields, due to depressed grain growth and enhanced grain boundary flux pinning.

  5. Global investigation of the Mg atom and ion layers using SCIAMACHY/Envisat observations between 70 and 150 km altitude and WACCM-Mg model results

    Directory of Open Access Journals (Sweden)

    M. P. Langowski

    2015-01-01

    Full Text Available Mg and Mg+ concentration fields in the upper mesosphere/lower thermosphere (UMLT region are retrieved from SCIAMACHY/Envisat limb measurements of Mg and Mg+ dayglow emissions using a 2-D tomographic retrieval approach. The time series of monthly mean Mg and Mg+ number density and vertical column density in different latitudinal regions are presented. Data from the limb mesosphere–thermosphere mode of SCIAMACHY/Envisat are used, which cover the 50 to 150 km altitude region with a vertical sampling of ≈3.3 km and latitudes up to 82°. The high latitudes are not observed in the winter months, because there is no dayglow emission during polar night. The measurements were performed every 14 days from mid-2008 until April 2012. Mg profiles show a peak at around 90 km altitude with a density between 750 cm−3 and 1500 cm−3. Mg does not show strong seasonal variation at latitudes below 40°. For higher latitudes the density is lower and only in the Northern Hemisphere a seasonal cycle with a summer minimum is observed. The Mg+ peak occurs 5–15 km above the neutral Mg peak altitude. These ions have a significant seasonal cycle with a summer maximum in both hemispheres at mid and high latitudes. The strongest seasonal variations of Mg+ are observed at latitudes between 20 and 40° and the density at the peak altitude ranges from 500 cm−3 to 4000 cm−3. The peak altitude of the ions shows a latitudinal dependence with a maximum at mid latitudes that is up to 10 km higher than the peak altitude at the equator. The SCIAMACHY measurements are compared to other measurements and WACCM model results. The WACCM results show a significant seasonal variability for Mg with a summer minimum, which is more clearly pronounced than for SCIAMACHY, and globally a higher peak density than the SCIAMACHY results. Although the peak density of both is not in agreement, the vertical column density agrees well, because SCIAMACHY and WACCM profiles have different

  6. Reconstructive structural phase transitions in dense Mg

    International Nuclear Information System (INIS)

    Yao Yansun; Klug, Dennis D

    2012-01-01

    The question raised recently about whether the high-pressure phase transitions of Mg follow a hexagonal close-packed (hcp) → body centered cubic (bcc) or hcp → double hexagonal close-packed (dhcp) → bcc sequence at room temperature is examined by the use of first principles density functional methods. Enthalpy calculations show that the bcc structure replaces the hcp structure to become the most stable structure near 48 GPa, whereas the dhcp structure is never the most stable structure in the pressure range of interest. The characterized phase-transition mechanisms indicate that the hcp → dhcp transition is also associated with a higher enthalpy barrier. At room temperature, the structural sequence hcp → bcc is therefore more energetically favorable for Mg. The same conclusion is also reached from the simulations of the phase transitions using metadynamics methods. At room temperature, the metadynamics simulations predict the onset of a hcp → bcc transition at 40 GPa and the transition becomes more prominent upon further compression. At high temperatures, the metadynamics simulations reveal a structural fluctuation among the hcp, dhcp, and bcc structures at 15 GPa. With increasing pressure, the structural evolution at high temperatures becomes more unambiguous and eventually settles to a bcc structure once sufficient pressure is applied. (paper)

  7. Investigation of blue luminescence in Mg-doped nonpolar a-plane GaN

    International Nuclear Information System (INIS)

    Kim, Hogyoung; Song, Keun Man

    2014-01-01

    The temperature-dependent optical characteristics of blue luminescence (BL) band in Mg-doped nonpolar a-plane GaN films were investigated using photoluminescence (PL) measurements. For the sample with the highest Cp 2 Mg/TMGa ([Mg]/[Ga]) molar ratio, the BL band was shown to have two distinct peaks, one at about 2.95 eV and the other at about 2.75 eV, which were associated with the donor–acceptor pair (DAP) transitions between the one shallow Mg acceptor level and the two different deep donor levels. In contrast, a single broad BL band was observed for all other samples. Strong potential fluctuations caused by high compensation level in the sample with the highest [Mg]/[Ga] molar ratio might localize the carriers related to the 2.75 eV band, leading to the different emission characteristics in BL band as compared to other samples. -- Highlights: • The temperature-dependent optical characteristics of blue luminescence (BL) in Mg-doped nonpolar a-plane GaN were investigated using photoluminescence (PL) measurements. • At the highest [Mg]/[Ga] molar ratio, the BL was observed to have two distinct peaks at low temperatures. • The BL was associated with the one shallow Mg acceptor level and the two different Mg-related deep donor levels. • Strong potential fluctuations caused by high compensation level might localize the carriers

  8. Investigation of blue luminescence in Mg-doped nonpolar a-plane GaN

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hogyoung [Department of Optometry, Seoul National University of Science and Technology, Seoul 139-743 (Korea, Republic of); Song, Keun Man, E-mail: skmmec@gmail.com [Korea Advanced Nano Fab Center, Suwon, Gyeonggi 443-770 (Korea, Republic of)

    2014-01-15

    The temperature-dependent optical characteristics of blue luminescence (BL) band in Mg-doped nonpolar a-plane GaN films were investigated using photoluminescence (PL) measurements. For the sample with the highest Cp{sub 2}Mg/TMGa ([Mg]/[Ga]) molar ratio, the BL band was shown to have two distinct peaks, one at about 2.95 eV and the other at about 2.75 eV, which were associated with the donor–acceptor pair (DAP) transitions between the one shallow Mg acceptor level and the two different deep donor levels. In contrast, a single broad BL band was observed for all other samples. Strong potential fluctuations caused by high compensation level in the sample with the highest [Mg]/[Ga] molar ratio might localize the carriers related to the 2.75 eV band, leading to the different emission characteristics in BL band as compared to other samples. -- Highlights: • The temperature-dependent optical characteristics of blue luminescence (BL) in Mg-doped nonpolar a-plane GaN were investigated using photoluminescence (PL) measurements. • At the highest [Mg]/[Ga] molar ratio, the BL was observed to have two distinct peaks at low temperatures. • The BL was associated with the one shallow Mg acceptor level and the two different Mg-related deep donor levels. • Strong potential fluctuations caused by high compensation level might localize the carriers.

  9. Magnesium-Based Sacrificial Anode Cathodic Protection Coatings (Mg-Rich Primers for Aluminum Alloys

    Directory of Open Access Journals (Sweden)

    Michael D. Blanton

    2012-09-01

    Full Text Available Magnesium is electrochemically the most active metal employed in common structural alloys of iron and aluminum. Mg is widely used as a sacrificial anode to provide cathodic protection of underground and undersea metallic structures, ships, submarines, bridges, decks, aircraft and ground transportation systems. Following the same principle of utilizing Mg characteristics in engineering advantages in a decade-long successful R&D effort, Mg powder is now employed in organic coatings (termed as Mg-rich primers as a sacrificial anode pigment to protect aerospace grade aluminum alloys against corrosion. Mg-rich primers have performed very well on aluminum alloys when compared against the current chromate standard, but the carcinogenic chromate-based coatings/pretreatments are being widely used by the Department of Defense (DoD to protect its infrastructure and fleets against corrosion damage. Factors such as reactivity of Mg particles in the coating matrix during exposure to aggressive corrosion environments, interaction of atmospheric gases with Mg particles and the impact of Mg dissolution, increases in pH and hydrogen gas liberation at coating-metal interface, and primer adhesion need to be considered for further development of Mg-rich primer technology.

  10. Doping effects of carbon and titanium on the critical current density of MgB2

    International Nuclear Information System (INIS)

    Shen, T M; Li, G; Cheng, C H; Zhao, Y

    2006-01-01

    MgB 2 bulks doped with Ti or/and C were prepared by an in situ solid state reaction method to determine the combined effect of C and Ti doping and to probe the detailed mechanism. The magnetization measurement shows that Mg 0.95 Ti 0.05 B 1.95 C 0.05 sample has significantly improved flux pinning compared to the MgB 1.95 C 0.05 sample at 20 K, indicating that C and Ti are largely cooperative in improving the J c (H) behaviour. No TiC phase was detected in the x-ray diffraction (XRD) patterns. Moreover, the overlap of the (100) peaks of MgB 1.95 C 0.05 and Mg 0.95 Ti 0.05 B 1.95 C 0.05 showed that Ti doping does not reduce the amount of C in MgB 2 . Microstructural analyses revealed that the addition of Ti eliminated the porosity present in the carbon-doped MgB 2 pellet, resulting in an improved intergrain connectivity and an increase of effective current pass. Further, MgB 2 doped with C and Ti, which mainly consists of spherical grains about 200-300 nm in size, shows an higher grain homogeneity than the C-doped sample, suggesting that the Ti doping in MgB 1-x C x has played an important role in obtaining uniform grains

  11. Mg isotope systematics during magmatic processes: Inter-mineral fractionation in mafic to ultramafic Hawaiian xenoliths

    Science.gov (United States)

    Stracke, A.; Tipper, E. T.; Klemme, S.; Bizimis, M.

    2018-04-01

    Observed differences in Mg isotope ratios between bulk magmatic rocks are small, often on a sub per mill level. Inter-mineral differences in the 26Mg/24Mg ratio (expressed as δ26Mg) in plutonic rocks are on a similar scale, and have mostly been attributed to equilibrium isotope fractionation at magmatic temperatures. Here we report Mg isotope data on minerals in spinel peridotite and garnet pyroxenite xenoliths from the rejuvenated stage of volcanism on Oahu and Kauai, Hawaii. The new data are compared to literature data and to theoretical predictions to investigate the processes responsible for inter-mineral Mg isotope fractionation at magmatic temperatures. Theory predicts up to per mill level differences in δ26Mg between olivine and spinel at magmatic temperatures and a general decrease in Δ26Mgolivine-spinel (=δ26Mgolivine - δ26Mgspinel) with increasing temperature, but also with increasing Cr# in spinel. For peridotites with a simple petrogenetic history by melt depletion, where increasing depletion relates to increasing melting temperatures, Δ26Mgolivine-spinel should thus systematically decrease with increasing Cr# in spinel. However, most natural peridotites, including the Hawaiian spinel peridotites investigated in this study, are overprinted by variable extents of melt-rock reaction, which disturb the systematic primary temperature and compositionally related olivine-spinel Mg isotope systematics. Diffusion, subsolidus re-equilibration, or surface alteration may further affect the observed olivine-spinel Mg isotope fractionation in peridotites, making Δ26Mgolivine-spinel in peridotites a difficult-to-apply geothermometer. The available Mg isotope data on clinopyroxene and garnet suggest that this mineral pair is a more promising geothermometer, but its application is restricted to garnet-bearing igneous (garnet pyroxenites) and metamorphic rocks (eclogites). Although the observed δ26Mg variation is on a sub per mill range in bulk magmatic rocks

  12. Newly synthesized MgAl2Ge2: A first-principles comparison with its silicide and carbide counterparts

    Science.gov (United States)

    Tanveer Karim, A. M. M.; Hadi, M. A.; Alam, M. A.; Parvin, F.; Naqib, S. H.; Islam, A. K. M. A.

    2018-06-01

    Using plane-wave pseudopotential density functional theory (DFT), the first-principle calculations are performed to investigate the structural aspects, mechanical behaviors and electronic features of the newly synthesized CaAl2Si2-prototype intermetallic compound, MgAl2Ge2 for the first time and the results are compared with those calculated for its silicide and carbide counterparts MgAl2Si2 and MgAl2C2. The calculated lattice constants agree fairly well with their corresponding experimental values. The estimated elastic tensors satisfy the mechanical stability conditions for MgAl2Ge2 along with MgAl2Si2 and MgAl2C2. The level of elastic anisotropy increases following the sequence of X-elements Ge → Si → C. MgAl2Ge2 and MgAl2Si2 are expected to be ductile and damage tolerant, while MgAl2C2 is a brittle one. MgAl2Ge2 and MgAl2Si2 should exhibit better thermal shock resistance and low thermal conductivity and accordingly these can be used as thermal barrier coating (TBC) materials. The Debye temperature of MgAl2Ge2 is lowest among three intermetallic compounds. MgAl2Ge2 and MgAl2Si2 should exhibit metallic conductivity; while the dual characters of weak-metals and semiconductors are expected for MgAl2C2. The values of theoretical Vickers hardness for MgAl2Ge2, MgAl2Si2, and MgAl2C2 are 3.3, 2.7, and 7.7 GPa, respectively, indicating that these three intermetallics are soft and easily machinable.

  13. Sr, Mg cosubstituted HA porous macro-granules: potentialities as resorbable bone filler with antiosteoporotic functions.

    Science.gov (United States)

    Landi, Elena; Uggeri, Jacopo; Medri, Valentina; Guizzardi, Stefano

    2013-09-01

    Porous macro-granules of nanostructured apatite with Ca ions partially cosubstituted with Mg and Sr ions in different ratios (SrMgHAs), were synthesized at 37°C and compared with Mg and/or Sr free apatites (MgHAs and HA). Strontium improved the Mg substitution extent in the apatite and the chemical-physical and thermal stability of the resulting cosubstituted apatite. Porous macro-granules of 400-600 micron with selected composition were tested for the ionic release in synthetic body fluid and the data were related with the results of preliminary cell investigation in vitro. As compared to the corresponding Sr-free granulate, the SrMgHA could be exploited to prolong the beneficial Mg release during the bone regeneration process. In addition the contemporary in situ supply of Sr, an antiosteoporotic and anticarie ion, could influence the quality of new hard tissues. The ionic multirelease created a more favorable environment for human osteoblasts, demonstrated by a proliferative effect for each dose tested in the range 0.1-10 mg/mL. Copyright © 2013 Wiley Periodicals, Inc.

  14. Frequency and severity of reactions to a 325-mg aspirin dose during desensitization.

    Science.gov (United States)

    Schuler, Charles F; Baldwin, James L; Baptist, Alan P

    2017-03-01

    The frequency with which patients with aspirin-exacerbated respiratory disease (AERD) react to 325 mg of aspirin during aspirin desensitization, or fail to react at all, is not fully known. To determine the rate and type of reaction at 325 mg of aspirin during desensitization. A retrospective study of 104 patients who underwent aspirin desensitization from 2010 to 2016 was performed. A standard desensitization protocol (starting at 20-40 mg, progressing through 325 mg, and extinguishing reactions by dose repetition) was used. Reactions were defined by upper respiratory tract symptoms, lower respiratory tract symptoms, and/or forced expiratory volume in 1 second decrease of 15% or greater. Patients who did and did not react were compared by logistic regression. Eighty-four patients reacted (81%) and 20 did not (19%). Seventy-seven patients who had a provoking reaction at 162 mg of aspirin or less subsequently extinguished their reactions before they reached a dose of 325 mg and had no problems at that dose; one subsequent 325-mg reaction occurred during a protocol violation. One initial provoking reaction to 325 mg occurred. Both 325-mg reactions were mild, and neither met the forced expiratory volume in 1 second criterion for a clinically meaningful change. The remaining 5 patients could not complete the protocol because of persistent reactions or social reasons. Reactors were more likely to have had asthma for more than 10 years than nonreactors (odds ratio, 3.2; 95% confidence interval, 1.0-10.3; P = .05). During aspirin desensitization for AERD, provoking reactions at the 325-mg dose are rare (1%) and mild. Patients who react at 162 mg or less and extinguish their reactions may be able to administer the 325-mg dose at home. Copyright © 2016 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  15. Effect of Mg Doping on the Photoluminescence of GaN:Mg Films by Radio-Frequency Plasma-Assisted Molecular Beam Epitaxy

    International Nuclear Information System (INIS)

    Sui Yan-Ping; Yu Guang-Hui

    2011-01-01

    We investigate undoped GaN and Mg-doped GaN grown by rf plasma-assisted molecular beam epitaxy (MBE) with different Mg concentrations by photoluminescence (PL) at low temperature, Hall-effect and XRD measurements. In the PL spectra of lightly Mg-doped GaN films, a low intensity near band edge (NBE) emission and strong donor-acceptor pair (DAP) emission with its phonon replicas are observed. As the Mg concentration is increased, the DAP and NBE bands become weaker and a red shift of these bands is observed in the PL spectra. Yellow luminescence (YL) is observed in heavily Mg-doped GaN. The x-ray diffraction is employed to study the structure of the films. Hall measurement shows that there is a maximum value (3.9 × 10 18 cm −3 ) of hole concentration with increasing Mg source temperature for compensation effect. PL spectra of undoped GaN are also studied under N-rich and Ga-rich growth conditions. Yellow luminescences of undoped Ga-rich GaN and heavily Mg-doped GaN are compared, indicating the different origins of the YL bands. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

  16. Perbandingan Gabapentin 600 mg dengan 1.200 mg per Oral Preoperatif terhadap Nilai Visual Analogue Scale dan Pengurangan Kebutuhan Petidin Pascaoperasi pada Modifikasi Mastektomi Radikal

    Directory of Open Access Journals (Sweden)

    Ardi Zulfariansyah

    2013-12-01

    Full Text Available Gabapentin is a GABA analog which has the effect of anti hyperalgesia, anti allodynia, and anti nociceptive. This research was conducted in order to assess the effect of 600mg and 1,200 mg gabapentin given preoperatively to assess visual analogue scale (VAS score and reduction of pethidine requirement. The study was done by conducting a double blind randomized controlled trial on 38 patients, aged 18–65 years, with ASA physical status I–II. Patients were divided into two groups: 600 mg gabapentin and 1,200 mg gabapentin group. The quality of pain was assessed using VAS score. The results were statistically analyzed using Mann-Whitney Test with 95% confidence interval and considered significant if p value <0.05. From the results, the VAS values obtained at rest and during mobilization were significantly different (p<0.05. The 1,200 mg gabapentin group received less additional pethidine (10.5% vs 15.8%, although no significant difference was shown (p=0.631. The conclusion of this study is that administration of 1,200 mg gabapentin per oral pre operatively is better when compared to 600 mg in reducing post operative visual analog scale score in modified radical mastectomy. However, it do not reduce the need for analgesic significantly.

  17. The effect of different dialyzer membrane on the clearance of serum β2-MG in maintenance hemodialysis patients

    International Nuclear Information System (INIS)

    Lu Yun; Xue Jun; Lin Xiangtong; Deng Shouzhen; Li Ding

    2001-01-01

    Objective: To investigate the effect of different membrane on the clearance of serum β 2 -MG in maintenance hemodialysis patients. Method: 106 maintenance hemodialysis patients randomized divided into group A and group B. Group A used cellulose triacetate membrane (N-130E), Group B used polysulfone membrane (F6). The levels of serum β 2 -MG before and after hemodialysis were compared in Group A and B, respectively. Results: Before hemodialysis, the level of serum β 2 -MG was not significant different between Group A and B (46.74 ± 19.46 mg/L vs 47.49 ± 16.71 mg/L, P>0.05). In Group A, compared with that before hemodialysis, the level of serum β 2 -MG after hemodialysis decreased significantly. (46.74±19.46 mg/L vs 39.76 ±17.66 mg/L, before HD vs after HD, P 2 -MG between before and after hemodialysis (47.49±16.71 mg/L vs 50.19±22.76 mg/L, P>0.05). Conclusion: N-130E dialyzer is better than F6 dialyzer as the effect of clearance serum β 2 -MG is concerned

  18. Engineered carbon (biochar) prepared by direct pyrolysis of Mg-accumulated tomato tissues: characterization and phosphate removal potential.

    Science.gov (United States)

    Yao, Ying; Gao, Bin; Chen, Jianjun; Zhang, Ming; Inyang, Mandu; Li, Yuncong; Alva, Ashok; Yang, Liuyan

    2013-06-01

    An innovative method was developed to produce engineered biochar from magnesium (Mg) enriched tomato tissues through slow pyrolysis in a N2 environment. Tomato plants treated with 25mM Mg accumulated much higher level of Mg in tissue, indicating Mg can be substantially enriched in tomato plants, and pyrolysis process further concentrated Mg in the engineered biochar (8.8% Mg). The resulting Mg-biochar composites (MgEC) showed better sorption ability to phosphate (P) in aqueous solutions compared to the other four tomato leaves biochars. Statistical analysis showed a strong and significant correlation between P removal rate and biochar Mg content (R(2)=0.78, and p<0.001), indicating the enriched Mg in the engineered biochar is the main factor controlling its P removal ability. SEM-EDX, XRD and XPS analyses showed that nanoscale Mg(OH)2 and MgO particles were presented on the surface of MgEC, which serve as the main adsorption sites for aqueous P. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Comparative pharmacognosy of Pashanbhed

    Directory of Open Access Journals (Sweden)

    Poonam Verma

    2014-01-01

    Full Text Available Background: Pashanbhed is a commercially available diuretic and lithotropic drug, used to treat renal problems. It is a controversial name as it is assigned to various plants such as Bergenia ligulata, Kalanchoe pinnata, Coleus aromaticus and Rotula aquatica. Objective: To perform the comparative preliminary phytochemical screening, diuretic activity, and thin layer chromatography (TLC finger printing profile of three plants (B. ligulata, C. aromaticus, and K. pinnata, most commonly used as Pashanbhed. Materials and Methods: Diuretic potential of methanolic extract (ME of three plants were evaluated at two dose levels (500 and 1,000 mg/kg p.o., using normal Wistar rats (Lipschitz method. Furosemide (20 mg/kg p.o. was used as a standard drug. The effect on urine output and electrolyte changes were measured for 24 h and compared. All MEs were screened preliminarily for their constituents and their TLC finger printing profiles were prepared. One-way analysis of variance (ANOVA followed by Bonferroni′s multiple comparison test. P < 0.05 was considered statistically significant. Results: The MEs of all three plants have shown diuresis in normal rats. However, in intercomparison of the ME C. aromaticus (1,000 mg/kg p.o. produced more significant diuresis (P < 0.05 and electrolyte excretion compared to other test groups, the effect was at par with furosemide. The ME of these plants showed presence of alkaloids, glycosides, steroids, terpenoids, saponins, flavonoids, etc. Conclusion: The ME of C. aromaticus (1,000 mg/kg p.o. has showed highest diuretic action (4.2 among the tested extracts. This suggests the use of C. aromaticus leaves as "Pashanbhed"; the most effective diuretic drug.

  20. Comparative pharmacognosy of Pashanbhed

    Science.gov (United States)

    Verma, Poonam; Gauttam, Vinod; Kalia, Ajudhia N.

    2014-01-01

    Background: Pashanbhed is a commercially available diuretic and lithotropic drug, used to treat renal problems. It is a controversial name as it is assigned to various plants such as Bergenia ligulata, Kalanchoe pinnata, Coleus aromaticus and Rotula aquatica. Objective: To perform the comparative preliminary phytochemical screening, diuretic activity, and thin layer chromatography (TLC) finger printing profile of three plants (B. ligulata, C. aromaticus, and K. pinnata), most commonly used as Pashanbhed. Materials and Methods: Diuretic potential of methanolic extract (ME) of three plants were evaluated at two dose levels (500 and 1,000 mg/kg p.o.), using normal Wistar rats (Lipschitz method). Furosemide (20 mg/kg p.o.) was used as a standard drug. The effect on urine output and electrolyte changes were measured for 24 h and compared. All MEs were screened preliminarily for their constituents and their TLC finger printing profiles were prepared. One-way analysis of variance (ANOVA) followed by Bonferroni's multiple comparison test. P < 0.05 was considered statistically significant. Results: The MEs of all three plants have shown diuresis in normal rats. However, in intercomparison of the ME C. aromaticus (1,000 mg/kg p.o.) produced more significant diuresis (P < 0.05) and electrolyte excretion compared to other test groups, the effect was at par with furosemide. The ME of these plants showed presence of alkaloids, glycosides, steroids, terpenoids, saponins, flavonoids, etc. Conclusion: The ME of C. aromaticus (1,000 mg/kg p.o.) has showed highest diuretic action (4.2) among the tested extracts. This suggests the use of C. aromaticus leaves as “Pashanbhed”; the most effective diuretic drug. PMID:24948861

  1. Influence of the core-hole effect on optical properties of magnesium oxide (MgO) near the Mg L-edge region.

    Science.gov (United States)

    Sinha, Mangalika; Modi, Mohammed H; Ghosh, Haranath; Yadav, P K; Gupta, R K

    2018-05-01

    The influence of the core-hole effect on optical properties of magnesium oxide (MgO) is established through experimental determination of optical constants and first-principles density functional theory studies. Optical constants (δ and β) of MgO thin film are measured in the spectral region 40-300 eV using reflectance spectroscopy techniques at the Indus-1 synchrotron radiation source. The obtained optical constants show strong core exciton features near the Mg L-edge region, causing significant mismatch with Henke's tabulated values. On comparing the experimentally obtained optical constants with Henke's tabulated values, an edge shift of ∼3.0 eV is also observed. Distinct evidence of effects of core exciton on optical constants (δ and β) in the near Mg L-edge absorption spectra are confirmed through first-principles simulations.

  2. Properties of mechanically alloyed Mg-Ni-Ti ternary hydrogen storage alloys for Ni-MH batteries

    Science.gov (United States)

    Ruggeri, Stéphane; Roué, Lionel; Huot, Jacques; Schulz, Robert; Aymard, Luc; Tarascon, Jean-Marie

    MgNiTi x, Mg 1- xTi xNi and MgNi 1- xTi x (with x varying from 0 to 0.5) alloys have been prepared by high energy ball milling and tested as hydrogen storage electrodes. The initial discharge capacities of the Mg-Ni-Ti ternary alloys are inferior to the MgNi electrode capacity. However, an exception is observed with MgNi 0.95Ti 0.05, which has an initial discharge capacity of 575 mAh/g compared to 522 mAh/g for the MgNi electrode. The Mg-Ni-Ti ternary alloys show improved cycle life compared to Mg-Ni binary alloys with the same Mg/Ni atomic ratio. The best cycle life is observed with Mg 0.5Ti 0.5Ni electrode which retains 75% of initial capacity after 10 cycles in comparison to 39% for MgNi electrodes, in addition to improved high-rate dischargeability (HRD). According to the XPS analysis, the cycle life improvement of the Mg 0.5Ti 0.5Ni electrode can be related to the formation of TiO 2 which limits Mg(OH) 2 formation. The anodic polarization curve of Mg 0.5Ti 0.5Ni electrode shows that the current related to the active/passive transition is much less important and that the passive region is more extended than for the MgNi electrode but the corrosion of the electrode is still significant. This suggests that the cycle life improvement would be also associated with a decrease of the particle pulverization upon cycling.

  3. Half-life determination for 27Mg

    Science.gov (United States)

    Zahn, G. S.; Genezini, F. A.

    2015-07-01

    In this work, the half-life of the short-lived magnesium radionuclide 27Mg was measured by following the activity of samples after they were irradiated in the IEA-R1 reactor. An exponential decay function was then fitted to the results using the counts from a 60Co source as livetime chronometer; the individual half-life values obtained for each irradiation were compiled using both the usual unweighted and σ-2-weighted averages, as well as the robust averages obtained using the Normalized Residuals and the Rajeval techniques. The final halflive values obtained aren't compatible with the ENSDF compilation values, but have a similar uncertainty; analysis of the experimental literature values, all from the 50’s-60’s, show that further measurements should be undertaken in order to achieve a more robust consensus value for this half-life.

  4. Experimental lifetimes for Mg-like chlorine

    International Nuclear Information System (INIS)

    Engstroem, L.; Bengtsson, P.; Jupen, C.; Livingston, A.E.; Martinson, I.

    1995-01-01

    The results of beam-foil measurements of lifetimes for low-lying singlet levels in Mg-like chlorine, Cl VI, are presented. The decay curves were analyzed by means of the arbitrarily normalized decay curve method, combined with the recently developed CANYL code, which facilitates studies of decay chains. Cascade corrected data are presented for the levels 3s3p 1 P, 3p 2 1 S, 3p 2 1 D, and 3s3d 1 D, whereas less rigorous lifetime values, based on curve fits, were obtained for the 3p3d 1 D, 3p3d 1 F, and 3s4f 1 F levels. The data are in excellent agreement with recent theoretical values, and previous discrepancies between experiment and theory for short-lived states have been removed

  5. MgO by injection CVD

    International Nuclear Information System (INIS)

    Abrutis, A.; Kubilius, V.; Teiserkis, A.; Bigelyte, V.; Vengalis, B.; Jukna, A.; Butkute, R.

    1997-01-01

    Epitaxial YBa 2 Cu 3 O 7 layers with 45 in-plane orientation have been grown by injection CVD on MgO substrates polished off-axis to within 1.4-1.9 of the [100] direction. This new single-source CVD process is based on computer-controlled injection of precise microdoses of a metal-organic precursor solution into a CVD reactor. A wide range of solution compositions was tested to investigate compositional effects on phase purity, surface morphology, texturing and superconducting properties of the prepared films. The highest quality films with pure 45 texture had a smooth surface, zero resistance T c (R=0) of 88-89 K, and critical current density J c (77 K) above 10 6 A/cm 2 . (orig.) and critical current density J c (77 K) above 10 6 A/cm 2 . (orig.)

  6. The three shapes of 32Mg

    International Nuclear Information System (INIS)

    Poves, A.; Nowacki, F.; Caurier, E.

    2014-01-01

    The N=20 and N=28 'islands of inversion' are described by large scale shell model calculations which mix configurations with different Nℎω or equivalently with different number of particles promoted from the sd-shell to the p f-shell. We pay particular attention to the properties of the states at fix Nℎω which turn out to be the real protagonists of the physics at N=20. In particular we study the appearance of spherical, deformed and superdeformed structures in 32 Mg at fixed 0p-0h, 2p-2h and 4p-4h configurations. Finally we show that the islands of deformation at N=20 and N=28 merge in a single one for Magnesium isotopes. (authors)

  7. Estabilidad de tabletas de Rifampicina 300 mg

    Directory of Open Access Journals (Sweden)

    Lisette Martínez Miranda

    2001-04-01

    Full Text Available Se realizó el estudio de estabilidad de las tabletas de rifampicina 300 mg. Se utilizó para la cuantificación del principio activo un método analítico desarrollado y validado por cromatografía líquida de alta resolución en fase reversa y detección ultravioleta. El estudio de estabilidad de las tabletas se efectuó mediante los métodos de vida útil y acelerado en condiciones isotérmicas; no se obtuvo una variación notable de la concentración en el tiempo de estudio y se demostró así la estabilidad química y térmica del principio activo, por lo que se proponen 2 años como fecha de vencimiento. La humedad relativa de 75, 84 y 92 % tuvo influencia en la estabilidad de la formulación en el período analizado.The stability study of rifampicin 300 mg was conducted. An analytical method developed and validated by high pressure liquid chromatography in reverse phase and ultraviolet detection was used for the quantification of the actives principle. The stability study of the tablets was conducted by the method of useful life and the accelerated method under isothermic conditions. There was no significant variation of the concentration during the time of study and, thus, the chemical and thermal stability of the active principle was proved. A period of 2 years was proposed as expiration date. A relative humidity of 75, 84 and 92% influenced on the stability of the formulation in the analyzed period.

  8. Hydriding and dehydriding rates of Mg, Mg-10TaF5, and Mg-10NbF5 prepared via reactive mechanical grinding

    Science.gov (United States)

    Song, Myoung Youp; Kwak, Young Jun; Lee, Seong Ho; Park, Hye Ryoung

    2015-01-01

    In this work, TaF5 and NbF5 were chosen as additives to enhance the hydriding and dehydriding rates of Mg. Mg, Mg-10TaF5, and Mg-10NbF5 samples were prepared by reactive mechanical grinding. The hydriding and dehydriding properties of the samples were then examined. Mg-10TaF5 had the largest amount of hydrogen absorbed for 30 min and the highest initial dehydriding rate after incubation period, followed in order by Mg-10NbF5, and Mg. At 593 K under 12 bar H2 at the first cycle, Mg-10TaF5 absorbed 3.63 wt% H for 5 min and 4.53 wt% H for 30 min. At 593 K under 1.0 bar H2 at the first cycle, Mg-10TaF5 desorbed 0 wt% H for 2.5 min, 0.59 wt% H for 5 min, 3.42 wt% H for 30 min, and 4.24 wt% H for 60 min. The reactive mechanical grinding of Mg with TaF5 or NbF5 is believed to have facilitated the nucleation and to have decreased the diffusion distances of hydrogen atoms. These two effects are believed to have increased the hydriding and dehydriding rates of Mg. The MgF2 and Ta2H formed in Mg-10TaF5, and the MgF2, NbH2, and NbF3 formed in Mg-10NbF5 are considered to have enhanced both of these effects.

  9. Mechanochemical Synthesis of Nanostructured MgXNi1-XO Compound by Mg-NiO Mixture

    Directory of Open Access Journals (Sweden)

    Nader Setoudeh

    2017-06-01

    Full Text Available Synthesis of magnesium nickel oxide phase such as MgxNi1-xO solid solutions has been studied in this research article using mechnochmical reaction between magnesium and nickel oxide. Mixtures of magnesium powder and nickel oxide (Mg+NiO with stoichiometric compositions were milled for different times in a planetary ball mill. Reduction reaction of nickel oxide by magnesium via a mechanically induced self-sustaining reaction (MSR was confirmed in the XRD measurements of the as-milled samples. Formation of nanostructured magnesium nickel oxide phases (such as Mg0.4Ni0.6O or MgNiO2 was observed after isothermal heating of the 30 minutes milled samples at 1000°C where nickel phase seems to disappear in XRD patterns. The traces of phases such as Mg0.4Ni0.6O or MgNiO2 were also observed in the as-milled mixtures. Therefore, the XRD results of the as-milled samples suggested that the formation of magnesium nickel oxide phases could be possible even after prolonged milling. The XRD and SEM results of both as-milled and isothermally heated samples indicated that the crystallite size and particle size of the final products reached to nanoscale after milling. Morphological and compositional evolution of the samples after heat treatment was monitored through SEM imaging and elemental analyses. The results confirmed that the composition of final product is close to Mg0.4Ni0.6O compound.

  10. Porous composite materials ZrO2(MgO)-MgO for osteoimplantology

    International Nuclear Information System (INIS)

    Buyakov, Ales; Litvinova, Larisa; Shupletsova, Valeria; Kulbakin, Denis; Kulkov, Sergey

    2016-01-01

    The pore structure and phase composition of ceramic composite material ZrO 2 (Mg)-MgO at different sintering temperatures were studied. The main mechanical characteristics of the material were determined and it was shown that they are close to the characteristics of natural bone tissues. It was shown that material structure has a positive effect on the pre-osteoblast cells proliferation. In-vitro studies of pre-osteoblast cells, cultivation on material surface showed a good cell adhesion, proliferation and differentiation of MMSC by osteogenic type.

  11. Sorption of selenium on Mg-Al and Mg-Al-Eu layered double hydroxides

    International Nuclear Information System (INIS)

    Curtius, H.; Paparigas, Z.; Kaiser, G.

    2008-01-01

    Salt domes represent deep geological formations which are under consideration as final repositories for irradiated research reactor fuel elements. For long-term safety aspects the mobilisation of the radionuclides due to a water ingress is intensively investigated. At the Institute of Energy Research (IEF-6), leaching experiments were performed in a hot cell facility with UAl x -Al and U 3 Si 2 -Al dispersed research reactor fuel elements in repository-relevant MgCl 2 -rich salt brines under anaerobic conditions. The fuel plates corroded completely within one year and a Mg-Al-layered double hydroxide (LDH) with chloride as interlayer anion was identified as one crystalline phase component of the corrosion products (secondary phases). This Mg-Al-LDH was synthesized, characterized, and the ability to retard europium by an incorporation process was investigated. Europium, as a representative for lanthanides, was identified to be one of the radionuclides which were found in the corrosion products. We could show that europium was incorporated in the lattice structure. LDHs have high anion exchange capacities that enhance their potential to remove anionic contaminants from aqueous systems. In this work the sorption behaviour of selenium in the chemical form as selenite (SeO 3 2- ) on Mg-Al-LDH and on Mg-Al-Eu-LDH was investigated. Especially the influence of the larger europium-III ion was of interest. It represents in the Mg-Al-Eu-LDH about 10% of the molar aluminium amount. The sorption has been experimentally studied in a wide range of pH, ionic strength, radionuclide and sorbent concentration. Both LDHs with chloride as interlayer anion were synthesized by a coprecipitation method under controlled conditions, and their main physico-chemical properties were analyzed prior to the sorption experiments. The sorption kinetics of selenite on the LDHs in water and in MgCl 2 -rich brine were rapid using a LDH concentration of 10 g/L. Equilibrium, indicated by stable p

  12. Porous composite materials ZrO{sub 2}(MgO)-MgO for osteoimplantology

    Energy Technology Data Exchange (ETDEWEB)

    Buyakov, Ales, E-mail: alesbuyakov@gmail.com [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); National Research Tomsk State University, Tomsk, 634050 (Russian Federation); Litvinova, Larisa, E-mail: larisalitvinova@yandex.ru; Shupletsova, Valeria, E-mail: vshupletsova@mail.ru [Immanuel Kant Baltic Federal University, Kaliningrad (Russian Federation); Kulbakin, Denis, E-mail: kulbakin2012@gmail.com [Tomsk Cancer Research Institute, Tomsk, 634050 (Russian Federation); Kulkov, Sergey, E-mail: kulkov@ispms.ru [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); National Research Tomsk State University, Tomsk, 634050 (Russian Federation); National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation)

    2016-08-02

    The pore structure and phase composition of ceramic composite material ZrO{sub 2}(Mg)-MgO at different sintering temperatures were studied. The main mechanical characteristics of the material were determined and it was shown that they are close to the characteristics of natural bone tissues. It was shown that material structure has a positive effect on the pre-osteoblast cells proliferation. In-vitro studies of pre-osteoblast cells, cultivation on material surface showed a good cell adhesion, proliferation and differentiation of MMSC by osteogenic type.

  13. Dual-scale phase-field simulation of Mg-Al alloy solidification

    International Nuclear Information System (INIS)

    Monas, A; Shchyglo, O; Tegeler, M; Steinbach, I; Höche, D

    2015-01-01

    Phase-field simulations of the nucleation and growth of primary α-Mg phase as well as secondary, β-phase of a Mg-Al alloy are presented. The nucleation model for α- and β-Mg phases is based on the “free growth model” by Greer et al.. After the α-Mg phase solidification we study a divorced eutectic growth of α- and β-Mg phases in a zoomed in melt channel between α-phase dendrites. The simulated cooling curves and final microstructures of α-grains are compared with experiments. In order to further enhance the resolution of the interdendritic region a high-performance computing approach has been used allowing significant simulation speed gain when using supercomputing facilities. (paper)

  14. Phthalocyanine doping to improve critical current densities in MgB2 tapes

    International Nuclear Information System (INIS)

    Zhang Xianping; Ma Yanwei; Wang Dongliang; Gao Zhaoshun; Wang Lei; Qi Yanpeng; Awaji, Satoshi; Watanabe, Kazuo; Mossang, Eric

    2009-01-01

    Phthalocyanine-doped MgB 2 tapes were prepared by the in situ powder-in-tube method. The relationships between the critical current properties, crystallinity and microstructure were studied as a function of the phthalocyanine doping level. It is found that both H irr and H c2 were improved when MgB 2 samples were doped with phthalocyanine, which are mainly attributed to the effective carbon substitution and enhanced flux pinning strength caused by very fine grain sizes. Furthermore, compared to pure samples, the MgO content remained almost unchanged in all doped tapes, which is very beneficial to having better grain connectivity in MgB 2 . Significantly improved J c was obtained in the phthalocyanine-doped MgB 2 tapes, especially under high magnetic fields.

  15. Evaporation mechanisms of MgO in laser assisted atom probe tomography

    KAUST Repository

    Mazumder, Baishakhi

    2011-05-01

    In this paper the field evaporation properties of bulk MgO and sandwiched MgO layers in Fe are compared using laser assisted Atom Probe Tomography. The comparison of flight time spectra gives an estimate of the evaporation times as a function of the wavelength and the laser energy. It is shown that the evaporation takes place in two steps on two different time scales in MgO. It is also shown that as long as the MgO layer is buried in Fe, the evaporation is dominated by the photon absorption in Fe layer at the tip apex. Eventually the evaporation process of MgO is discussed based on the difference between the bulk materials and the multilayer samples. © 2010 Elsevier B.V.

  16. Variation of equation of state parameters in the Mg2(Si 1-xSnx) alloys

    KAUST Repository

    Pulikkotil, Jiji Thomas Joseph

    2010-08-03

    Thermoelectric performance peaks up for intermediate Mg2(Si 1-x:Snx) alloys, but not for isomorphic and isoelectronic Mg2(Si1-xGex) alloys. A comparative study of the equation of state parameters is performed using density functional theory, Green\\'s function technique, and the coherent potential approximation. Anomalous variation of the bulk modulus is found in Mg2(Si1-xSn x) but not in the Mg2(Si1-xGex) analogs. Assuming a Debye model, linear variations of the unit cell volume and pressure derivative of the bulk modulus suggest that lattice effects are important for the thermoelectric response. From the electronic structure perspective, Mg2(Si1-xSnx) is distinguished by a strong renormalization of the anion-anion hybridization. © 2010 IOP Publishing Ltd.

  17. Fabrication of Spherical AlSi10Mg Powders by Radio Frequency Plasma Spheroidization

    Science.gov (United States)

    Wang, Linzhi; Liu, Ying; Chang, Sen

    2016-05-01

    Spherical AlSi10Mg powders were prepared by radio frequency plasma spheroidization from commercial AlSi10Mg powders. The fabrication process parameters and powder characteristics were investigated. Field emission scanning electron microscope, X-ray diffraction, laser particle size analyzer, powder rheometer, and UV/visible/infrared spectrophotometer were used for analyses and measurements of micrographs, phases, granulometric parameters, flowability, and laser absorption properties of the powders, respectively. The results show that the obtained spherical powders exhibit good sphericity, smooth surfaces, favorable dispersity, and excellent fluidity under appropriate feeding rate and flow rate of carrier gas. Further, acicular microstructures of the spherical AlSi10Mg powders are composed of α-Al, Si, and a small amount of Mg2Si phase. In addition, laser absorption values of the spherical AlSi10Mg powders increase obviously compared with raw material, and different spectra have obvious absorption peaks at a wavelength of about 826 nm.

  18. Polarized micro-Raman scattering characterization of Mg2Si nanolayers in (001) Si matrix

    International Nuclear Information System (INIS)

    Zlateva, G; Atanassov, A; Baleva, M; Nikolova, L; Abrashev, M V

    2007-01-01

    An orientational growth of the Mg 2 Si lattice relative to the Si lattice is considered assuming minimum mismatch of their lattice parameters. The Raman scattering cross-sections are calculated for the four possible orientations of the Mg 2 Si lattice positioned in this way. The integral intensity ratios for the F 2g mode of Mg 2 Si in different polarization configurations, obtained from the experimental spectra, are compared with the calculated ratios. It is found that the Mg 2 Si nanolayer's morphology is sensitive to the implantation energy, which determines both the peak Mg concentration in the initial implantation profile and its position in the sample depth. At a peak concentration of the order of the stoichiometric concentration, the layers are highly oriented. When the peak concentration is higher and the peak is placed closer to the surface, the layers are polycrystalline

  19. Quantitative Analysis of Mg in Pipeline Dirt Based on Laser-Induced Breakdown Spectroscopy

    International Nuclear Information System (INIS)

    Wang Shaolong; Wang Yangen; Chen Shanjun; Chen Qi

    2015-01-01

    In order to maintain the pipeline better and remove the dirt more effectively, it was necessary to analyze the contents of elements in dirt. Mg in soil outside of the pipe and the dirt inside of the pipe was quantitatively analyzed and compared by using the laser-induced breakdown spectroscopy (LIBS). Firstly, Mg was quantitatively analyzed on the basis of Mg I 285.213 nm by calibration curve for integrated intensity and peak intensity of the spectrum before and after subtracting noise, respectively. Then calibration curves on the basis of Mg II 279.553 nm and Mg II 280.270 nm were analyzed. The results indicated that it is better to use integrated intensity after subtracting noise of the spectrum line with high relative intensity to make the calibration curve. (paper)

  20. Evaporation mechanisms of MgO in laser assisted atom probe tomography

    KAUST Repository

    Mazumder, Baishakhi; Vella, Angela; Dé conihout, Bernard; Al-Kassab, Talaat

    2011-01-01

    In this paper the field evaporation properties of bulk MgO and sandwiched MgO layers in Fe are compared using laser assisted Atom Probe Tomography. The comparison of flight time spectra gives an estimate of the evaporation times as a function of the wavelength and the laser energy. It is shown that the evaporation takes place in two steps on two different time scales in MgO. It is also shown that as long as the MgO layer is buried in Fe, the evaporation is dominated by the photon absorption in Fe layer at the tip apex. Eventually the evaporation process of MgO is discussed based on the difference between the bulk materials and the multilayer samples. © 2010 Elsevier B.V.

  1. Role of dopants in LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P detectors

    International Nuclear Information System (INIS)

    Mohammadi, Kh.; Moussavi Zarandi, A.; Afarideh, H.; Shahmaleki, S.

    2013-01-01

    In this study, electronic structure of LiF crystal doped with Mg,Cu,P impurities was studied with WIEN2k code on the basis of FPLAPW+lo method. Results show that in Mg-doped LiF composition, an electronic trap was created with impurity concentration of 1.56% and 3.125%. In this condition, the electronic trap with increasing the percentage of the impurities up to 4.687% is annihilated. It was found, that by doping of Mg and Cu or P simultaneously, a hole-trap is created in valence band. It was realized that in LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P, Cu impurity and Li atom, have a key role in creation of levels which lead to create electronic and hole traps. Mg impurity and F atom, only have a role in creation of electronic traps. In addition, P impurity has a main role in creation of the electronic and hole traps in LiF:Mg,Cu,P. The activation energy of electronic and hole trap in LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P crystalline lattice were obtained as 0.3 and 5.5 eV, 0.92 and 3.4 eV and 0.75 and 3.1 eV, respectively. - Graphical abstract: Figure (a) and (b) shows changes in electronic structure and band gap energy of LiF crystal due to presence of Mg and Cu, Mg and P ions respectively. - Highlights: • Electronic structure of LiF, LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P materials were studied with WIEN2K code. • In LiF:Mg,Cu and LiF:Mg,Cu,P, Li atom and Cu impurity have a key role in creation of levels. • F atom and Mg impurity only have a role in creation of electronic traps. • In LiF:Mg,Cu,P, P impurity has a main role in creation of electronic and hole traps

  2. Ab initio study of MgH2 formation

    International Nuclear Information System (INIS)

    Novakovic, Nikola; Matovic, Ljiljana; Novakovic, Jasmina Grbovic; Manasijevic, Miodrag; Ivanovic, Nenad

    2009-01-01

    Even if there is considerable literature dealing with structure and properties of MgH 2 compound there are still some uncertain details about nature of bonding governing its formation and decomposition. In order to better understand the processes essential for absorption and desorption of MgH 2 , ab initio DFT based calculations of rutile MgH 2 compound, elemental hcp-Mg, and three different hypothetical hcp-Mg-derived hydrides are performed. Our findings show that all structures are unstable, and that MgH (Wurtzite) is a closest possible candidate for intermediate phase between the hcp-Mg and MgH 2 at 1:1 stoichiometry. An alternative hydration pathway is suggested, including promotion of hcp-Mg to bcc-Mg and consecutive transformation to rutile MgH 2 by means of hydrogen incorporation into Mg matrix. Rutile MgH 2 calculations with various hydrogen vacancies concentration are performed. Calculation shows that at high hydrogen concentration close to 1:2, stable substoichiometric hydride is possible. Calculation also shows that high vacancy (low hydrogen) concentration favors bcc-Mg 2 H over rutile Mg 2 H structure.

  3. Cytotoxicity assessment of adipose-derived mesenchymal stem cells on synthesized biodegradable Mg-Zn-Ca alloys

    Energy Technology Data Exchange (ETDEWEB)

    Fazel Anvari-Yazdi, Abbas [Department of Biomedical Engineering, Materials and Biomaterials Research Center (MBMRC), Tehran, IR (Iran, Islamic Republic of); Tahermanesh, Kobra, E-mail: tahermanesh.k@iums.ac.ir [Endometriosis and Gynecologic Disorders Research Center, Department of Ob. & Gyn., Rasoul-e Akram Hospital, Iran University of Medical Sciences (IUMS), Tehran, IR (Iran, Islamic Republic of); Hadavi, Seyed Mohammad Mehdi [Materials and Energy Research Center (MERC), Karaj, IR (Iran, Islamic Republic of); Talaei-Khozani, Tahereh [Tissue Engineering Lab, Anatomy Department, School of Medicine, Shiraz University of Medical Sciences (SUMS), Shiraz, IR (Iran, Islamic Republic of); Razmkhah, Mahboobeh [Shiraz Institute for Cancer Research, School of Medicine, Shiraz University of Medical Sciences (SUMS), Shiraz, IR (Iran, Islamic Republic of); Abed, Seyedeh Mehr [School of Medicine, Yasuj University of Medical Sciences (YUMS), Yasuj, IR (Iran, Islamic Republic of); Mohtasebi, Maryam Sadat [Shiraz Institute for Cancer Research, School of Medicine, Shiraz University of Medical Sciences (SUMS), Shiraz, IR (Iran, Islamic Republic of)

    2016-12-01

    Magnesium (Mg)-based alloys have been extensively considered as biodegradable implant materials for orthopedic surgery. Mg and its alloys are metallic biomaterials that can degrade in the body and promote new bone formation. In this study, the corrosion behavior and cytotoxicity of Mg-Zn-Ca alloys are evaluated with adipose-derived mesenchymal stem cells (ASCs). Mg-2Zn and Mg-2Zn-xCa (x = 1, 2 and 3 wt.%) alloys were designated. Mg alloys were analyzed with scanning electron microscopy and potentiodynamic polarization. To understand the in-vitro biocompatibility and cytotoxicity of Mg-2Zn and Mg-2Zn-xCa alloys, ASCs were cultured for 24 and 72 h in contact with 10%, 50% and 100% extraction of all alloys prepared in DMEM. Cell cytotoxicity and viability of ASCs were examined by MTT assay. Alloying elements including Zn and Ca improved the corrosion resistance of alloys were compared with pure Mg. The cytotoxicity results showed that all alloys had no significant adverse effects on cell viability in 24 h. After 72 h, cell viability and proliferation increased in the cells exposed to pure Mg and Mg-2Zn-1Ca extracts. The release of Mg, Zn and Ca ions in culture media had no toxic impacts on ASCs viability and proliferation. Mg-2Zn-1Ca alloy can be suggested as a good candidate to be used in biomedical applications. - Highlights: • Short and long term corrosion behavior of Mg-Zn-Ca alloys studied • Viability and toxicity of Adipose-derived Stem cells studied with Mg-Zn-Ca alloys • Understanding the morphology of cultured adipose stem cells on Mg alloys • Stem cells on Mg-Zn-Ca alloys could proliferate and expand.

  4. Cytotoxicity assessment of adipose-derived mesenchymal stem cells on synthesized biodegradable Mg-Zn-Ca alloys

    International Nuclear Information System (INIS)

    Fazel Anvari-Yazdi, Abbas; Tahermanesh, Kobra; Hadavi, Seyed Mohammad Mehdi; Talaei-Khozani, Tahereh; Razmkhah, Mahboobeh; Abed, Seyedeh Mehr; Mohtasebi, Maryam Sadat

    2016-01-01

    Magnesium (Mg)-based alloys have been extensively considered as biodegradable implant materials for orthopedic surgery. Mg and its alloys are metallic biomaterials that can degrade in the body and promote new bone formation. In this study, the corrosion behavior and cytotoxicity of Mg-Zn-Ca alloys are evaluated with adipose-derived mesenchymal stem cells (ASCs). Mg-2Zn and Mg-2Zn-xCa (x = 1, 2 and 3 wt.%) alloys were designated. Mg alloys were analyzed with scanning electron microscopy and potentiodynamic polarization. To understand the in-vitro biocompatibility and cytotoxicity of Mg-2Zn and Mg-2Zn-xCa alloys, ASCs were cultured for 24 and 72 h in contact with 10%, 50% and 100% extraction of all alloys prepared in DMEM. Cell cytotoxicity and viability of ASCs were examined by MTT assay. Alloying elements including Zn and Ca improved the corrosion resistance of alloys were compared with pure Mg. The cytotoxicity results showed that all alloys had no significant adverse effects on cell viability in 24 h. After 72 h, cell viability and proliferation increased in the cells exposed to pure Mg and Mg-2Zn-1Ca extracts. The release of Mg, Zn and Ca ions in culture media had no toxic impacts on ASCs viability and proliferation. Mg-2Zn-1Ca alloy can be suggested as a good candidate to be used in biomedical applications. - Highlights: • Short and long term corrosion behavior of Mg-Zn-Ca alloys studied • Viability and toxicity of Adipose-derived Stem cells studied with Mg-Zn-Ca alloys • Understanding the morphology of cultured adipose stem cells on Mg alloys • Stem cells on Mg-Zn-Ca alloys could proliferate and expand

  5. Hospital Compare

    Data.gov (United States)

    U.S. Department of Health & Human Services — Hospital Compare has information about the quality of care at over 4,000 Medicare-certified hospitals across the country. You can use Hospital Compare to find...

  6. [Comparison of 1 mg/body and 3 mg/body of intravenous granisetron for the prevention of chemotherapy-induced nausea and vomiting and adverse events in hematological malignancy patients].

    Science.gov (United States)

    Motohashi, Shinya; Hori, Katsuhito; Ono, Takaaki; Ohnishi, Kazunori; Kawakami, Junichi

    2012-01-01

    Granisetron is a selective 5-hydroxy tryptamine3 receptor antagonist and widely used for chemotherapy-induced nausea and vomiting (CINV). Recommended dose of intravenous granisetron in the USA and Europe has been set at 0.01 mg/kg (1 mg/body) in the antiemetic treatment guidelines established by the American Society of Clinical Oncology and National Comprehension Cancer Network. In contrast, the approved dose in Japan is 0.04 mg/kg (3 mg/body). Randomized controlled trials (RCTs) which compared 1 mg/body with 3 mg/body of intravenous granisetron for CINV had been reported in Japan. In these RCTs, however, hematological malignancy patients were excluded. We performed observational retrospective study to compare 1 mg/body with 3 mg/body of intravenous granisetron for the prevention of CINV and adverse events in hematological malignancy patients. Number of the patients and chemotherapy courses were 15 and 30 in the 1 mg/body group, and 15 and 27 in the 3 mg/body group, respectively. No nausea rates in the 1 and 3 mg/body group were 83% and 89% of courses, respectively. No vomiting rates in the 1 and 3 mg/body group were 97% and 100% of courses, respectively. The incidences of constipation in the 1 and 3 mg/body group were 34% and 45% of courses, respectively. Anaphylaxis and headache did not occur in both groups. Our findings suggested that 1 mg/body of intravenous granisetron can prevent from CINV in hematological malignancy patients, as well as 3 mg/body.

  7. The role of MgO content in ex situ MgB2 wires

    DEFF Research Database (Denmark)

    Kovac, P.; Hugek, I.; Meligek, T.

    2004-01-01

    An experimental study of the effect of MgO content in the MgB2 powder used for ex situ made composite wires was carried out. Two single-core MgB2/Fe/Cu wires were made using commercial MgB2 powders from Alfa Aesar containing different fraction of MgO. Critical temperature and critical currents of...

  8. Positron annihilation study of formation of Mg vacancy in MgO

    International Nuclear Information System (INIS)

    Mizuno, M.; Araki, H.; Shirai, Y.; Inoue, Y.; Sugita, K.; Mizoguchi, T.; Tanaka, I.; Adachi, H.

    2004-01-01

    We have investigated the formation of Mg vacancy induced by ultra-dilute trivalent impurities in MgO by a combination of positron annihilation measurement and theoretical calculations of positron lifetimes. The undoped MgO yields the shortest positron lifetime of 130 ps that is shorter than that of 166 ps previously reported using a single crystal sample. The positron lifetime of the doped samples increases with the increase of the Al or Ga dopant concentration and is saturated at around 170 ps. This result indicates that the previously reported value of 166 ps is ascribed to not the bulk but the vacancy state induced by impurities. The experimental bulk lifetime of 130 ps, which is obtained by employing trapping model, is well reproduced by the theoretical calculation using the semiconductor model. The calculated defect lifetime is about 20 ps longer than the experimental value. This may be due to the lattice relaxation around Mg vacancy associated with the trapping of positrons. (orig.)

  9. Positron annihilation study of formation of Mg vacancy in MgO

    Energy Technology Data Exchange (ETDEWEB)

    Mizuno, M.; Araki, H.; Shirai, Y. [Science and Technology Center for Atoms, Molecules and Ions Control, Osaka Univ., Osaka (Japan); Inoue, Y.; Sugita, K. [Dept. of Materials Science and Engineering, Osaka Univ., Osaka (Japan); Mizoguchi, T.; Tanaka, I.; Adachi, H. [Dept. of Materials Science and Engineering, Kyoto Univ., Kyoto (Japan)

    2004-07-01

    We have investigated the formation of Mg vacancy induced by ultra-dilute trivalent impurities in MgO by a combination of positron annihilation measurement and theoretical calculations of positron lifetimes. The undoped MgO yields the shortest positron lifetime of 130 ps that is shorter than that of 166 ps previously reported using a single crystal sample. The positron lifetime of the doped samples increases with the increase of the Al or Ga dopant concentration and is saturated at around 170 ps. This result indicates that the previously reported value of 166 ps is ascribed to not the bulk but the vacancy state induced by impurities. The experimental bulk lifetime of 130 ps, which is obtained by employing trapping model, is well reproduced by the theoretical calculation using the semiconductor model. The calculated defect lifetime is about 20 ps longer than the experimental value. This may be due to the lattice relaxation around Mg vacancy associated with the trapping of positrons. (orig.)

  10. The magnesium isotope (δ26Mg) signature of dolomites

    Science.gov (United States)

    Geske, A.; Goldstein, R. H.; Mavromatis, V.; Richter, D. K.; Buhl, D.; Kluge, T.; John, C. M.; Immenhauser, A.

    2015-01-01

    Dolomite precipitation models and kinetics are debated and complicated due to the complex and temporally fluctuating fluid chemistry and different diagenetic environments. Using well-established isotope systems (δ18O, δ13C, 87Sr/86Sr), fluid inclusions and elemental data, as well as a detailed sedimentological and petrographic data set, we established the precipitation environment and subsequent diagenetic pathways of a series of Proterozoic to Pleistocene syn-depositional marine evaporative (sabkha) dolomites, syn-depositional non-marine evaporative (lacustrine and palustrine) dolomites, altered marine ("mixing zone") dolomites and late diagenetic hydrothermal dolomites. These data form the prerequisite for a systematic investigation of dolomite magnesium isotope ratios (δ26Mgdol). Dolomite δ26Mg ratios documented here range, from -2.49‰ to -0.45‰ (δ26Mgmean = -1.75 ± 1.08‰, n = 42). The isotopically most depleted end member is represented by earliest diagenetic marine evaporative sabkha dolomites (-2.11 ± 0.54‰ 2σ, n = 14). In comparing ancient compositions to modern ones, some of the variation is probably due to alteration. Altered marine (-1.41 ± 0.64‰ 2σ, n = 4), and earliest diagenetic lacustrine and palustrine dolomites (-1.25 ± 0.86‰ 2σ, n = 14) are less negative than sabkha dolomites but not distinct in composition. Various hydrothermal dolomites are characterized by a comparatively wide range of δ26Mg ratios, with values of -1.44 ± 1.33‰ (2σ, n = 10). By using fluid inclusion data and clumped isotope thermometry (Δ47) to represent temperature of precipitation for hydrothermal dolomites, there is no correlation between fluid temperature (∼100 to 180 °C) and dolomite Mg isotope signature (R2 = 0.14); nor is there a correlation between δ26Mgdol and δ18Odol. Magnesium-isotope values of different dolomite types are affected by a complex array of different Mg sources and sinks, dissolution/precipitation and non

  11. Los implantes MG-OSSEOUS: Estudio multicéntrico retrospectivo MG-OSSEOUS implants: A multicentric retrospective study

    Directory of Open Access Journals (Sweden)

    E. Serrano Caturla

    2006-12-01

    Full Text Available Objetivo. Aportar unos datos estadísticamente fiables sobre la supervivencia e incidencias asociadas a los implantes y prótesis del modelo MG-OSSEOUS (Mozo-Grau, S.L., Valladolid, España y demostrar que su eficacia es comparable a todas las marcas comerciales. Material y método. Estudio multicéntrico retrospectivo coordinado por la empresa Scientific Management in O&SS (Barcelona, España. Se colocaron 1001 implantes en 247 pacientes y se diseñaron 328 prótesis, entre los años 2004 y 2005, con un seguimiento de 2 años. Todos los implantes cargados. Se analizan y pormenorizan todos los implantes, por diámetros, longitudes, posiciones, fases quirúrgicas, cargas, tipos y modelos de prótesis y técnicas complementarias aplicadas, tanto sincrónica como anacrónicamente. Resultados. Tras la homogeneización de las muestras, se objetiva una supervivencia del 97,8% a los 2 años, detallando los fracasos según las características de cada caso clínico. No se reporta ningún fracaso de la prótesis. Discusión. Protocolizamos una serie de criterios e indicaciones a la hora de colocar los implantes MG-OSSEOUS según los casos clínicos. Comparamos nuestros resultados con la bibliografía, tanto pretérita como actual, coincidiendo con la manera de actuar a lo largo de la historia de la implantología. Finalmente, extrapolamos los resultados que consideramos comparables a los publicados por el grupo Branemark. Conclusión. La calidad del implante MG-OSSEOUS combinada con protocolos implantológicos científicamente contrastados, muestra un 2,2% de fracaso a los 2 años de seguimiento, con un porcentaje de éxito del 100% tanto en la recolocación del implante como en la fase protésica.Objective. We present some statistically contrasted results regarding the survival and incidences of MG-OSSEOUS implants and prosthetic components (Mozo-Grau, S.L., Valladolid, Spain, and we prove that they have the same efficacy when compared with other

  12. Incorporation of Mg in Free-Standing HVPE GaN Substrates

    Science.gov (United States)

    Zvanut, M. E.; Dashdorj, J.; Freitas, J. A.; Glaser, E. R.; Willoughby, W. R.; Leach, J. H.; Udwary, K.

    2016-06-01

    Mg, the only effective p-type dopant for nitrides, is well studied in thin films due to the important role of the impurity in light-emitting diodes and high-power electronics. However, there are few reports of Mg in thick free-standing GaN substrates. Here, we demonstrate successful incorporation of Mg into GaN grown by hydride vapor-phase epitaxy (HVPE) using metallic Mg as the doping source. The concentration of Mg obtained from four separate growth runs ranged between 1016 cm-3 and 1019 cm-3. Raman spectroscopy and x-ray diffraction revealed that Mg did not induce stress or perturb the crystalline quality of the HVPE GaN substrates. Photoluminescence (PL) and electron paramagnetic resonance (EPR) spectroscopies were performed to investigate the types of point defects in the crystals. The near-band-edge excitonic and shallow donor-shallow acceptor radiative recombination processes involving shallow Mg acceptors were prominent in the PL spectrum of a sample doped to 3 × 1018 cm-3, while the EPR signal was also thought to represent a shallow Mg acceptor. Detection of this signal reflects minimization of nonuniform strain obtained in the thick free-standing HVPE GaN compared with heteroepitaxial thin films.

  13. Flux pinning behaviors of Ti and C co-doped MgB2 superconductors

    International Nuclear Information System (INIS)

    Yang, Y.; Zhao, D.; Shen, T.M.; Li, G.; Zhang, Y.; Feng, Y.; Cheng, C.H.; Zhang, Y.P.; Zhao, Y.

    2008-01-01

    Flux pinning behavior of carbon and titanium concurrently doped MgB 2 alloys has been studied by ac susceptibility and dc magnetization measurements. It is found that critical current density and irreversibility field of MgB 2 have been significantly improved by doping C and Ti concurrently, sharply contrasted to the situation of C-only-doped or Ti-only-doped MgB 2 samples. AC susceptibility measurement reveals that the dependence of the pinning potential on the dc applied field of Mg 0.95 Ti 0.05 B 1.95 C 0.05 has been determined to be U(B dc )∝B dc -1 compared to that of MgB 2 U(B dc )∝B dc -1.5 . As to the U(J) behavior, a relationship of U(J) ∝ J -0.17 is found fitting well for Mg 0.95 Ti 0.05 B 1.95 C 0.05 with respect to U(J) ∝ J -0.21 for MgB 2 . All the results reveal a strong enhancement of the high field pinning potential in C and Ti co-doped MgB 2

  14. Magnesium absorption in human subjects from leafy vegetables, intrinsically labeled with stable 26Mg

    International Nuclear Information System (INIS)

    Schwartz, R.; Spencer, H.; Welsh, J.J.

    1984-01-01

    Collards, turnip greens, leaf lettuce, and spinach, grown in nutrient solution so that their Mg content was 80 to 90% 26 Mg, were tested in ambulant male volunteers stabilized on a constant metabolic diet. The freeze-dried vegetables were incorporated in bran muffins in which the vegetables replaced part of the bran. Bran muffins without vegetables were consumed for breakfast each day. They were also used as a standard test meal to which the vegetable muffins were compared. All subjects participated in three consecutive isotope absorption tests: one of the standard test meal and two of the vegetables. The standard test was carried out after at least 30 days on the controlled diet. Subsequent tests of vegetables followed at 4-wk intervals. Each test meal contained 30 microCi 28 MgCl2 and 50 mg stable 26 Mg, the latter either as the intrinsic label of a test vegetable or as 26 MgCl 2 in solution taken with the standard bran muffins. Net absorption of both isotopes was measured to establish exchangeability and to determine relative Mg absorption from the vegetables. Exchangeability was 90% or higher from all meals tested. Relative Mg absorption was highest from collards and least from the standard test meal. Net absorption values ranged from 40 to 60%

  15. A DFT study of hydrogen adsorption on Be, Mg and Ca frameworks in erionite zeolite

    Energy Technology Data Exchange (ETDEWEB)

    Fellah, Mehmet Ferdi, E-mail: mferdi.fellah@btu.edu.tr

    2017-02-01

    Highlights: • Mg-ERI and Ca-ERI clusters have much lower chemical potential and hardness. • Adsorption enthalpies for Mg- and Ca-ERI are importantly greater than the liquefaction enthalpy of hydrogen. • Mg-ERI and Ca-ERI clusters have much HOMO-LUMO gap indicating higher reactivity. • Ca- and Mg-ERI are potential cryoadsorbent materials for hydrogen storage. - Abstract: The molecular hydrogen adsorption was investigated on additional frameworks with earth alkaline metal atoms (Be, Mg and Ca) in 24T ERI zeolite cluster model by means of Density Functional Theory study. HOMO and LUMO energy values, chemical potential, chemical hardness, electronegativity, adsorption energy and adsorption enthalpy values have been calculated in this study. Mg-ERI and Ca-ERI clusters have much lower chemical potentials with much lower adsorption energy values when compared to the value of Be-ERI cluster. Additionally, they are softer than Be-ERI cluster with respect to their lower chemical hardness values. Hydrogen adsorption enthalpy values were computed as −3.6 and −3.9 kJ/mol on Mg-ERI and Ca-ERI clusters, respectively. These adsorption enthalpy values are significantly larger than the enthalpy value of liquefaction for hydrogen molecule. This consequently specifies that Mg-ERI and Ca-ERI zeolite structures which have higher chemical reactivity appear to be a promising candidate cryoadsorbent for hydrogen storage.

  16. Biological activity evaluation of magnesium fluoride coated Mg-Zn-Zr alloy in vivo.

    Science.gov (United States)

    Jiang, Hongfeng; Wang, Jingbo; Chen, Minfang; Liu, Debao

    2017-06-01

    To explore the biodegradable characteristics and biological properties, which could promote new bone formation, of MgF 2 coated magnesium alloy (Mg-3wt%Zn-0.5wt%Zr) in rabbits. Magnesium alloy with MgF 2 coating was made and the MgF 2 /Mg-Zn-Zr was implanted in the femoral condyle of rabbits. Twelve healthy adult Japanese white rabbits in weight of 2.8-3.2kg were averagely divided into A(Mg-Zn-Zr) group and B(MgF 2 /MgZn-Zr) group. Indexes such as microstructural evolution, SEM scan, X-ray, Micro-CT and mechanical properties were observed and detected at 1th day, 2th, 4th, 8th, 12th, 24th week after implantation. Low-density regions occurred around the cancellous bone, and the regions gradually expanded during the 12weeks after implantation. The implant was gradually absorbed from 12 to 24weeks. The density of surrounding cancellous bone increased compared with the 12th week data. The degradation rate of B group was lower than that of A group (Pmagnesium ions. The biological properties of the coating itself presented good biocompatibility and bioactivity. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Flux pinning behaviors of Ti and C co-doped MgB{sub 2} superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Y.; Zhao, D.; Shen, T.M.; Li, G.; Zhang, Y. [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Feng, Y. [Northwest Institute for Nonferrous Metal Research, P.O. Box 51, Xian, Shaanxi 710016 (China); Western Superconductivity Technology Company, Xian (China); Cheng, C.H. [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, University of New South Wales, Sydney 2052, NSW (Australia); Zhang, Y.P. [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Zhao, Y. [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, University of New South Wales, Sydney 2052, NSW (Australia)], E-mail: yzhao@swjtu.edu.cn

    2008-09-15

    Flux pinning behavior of carbon and titanium concurrently doped MgB{sub 2} alloys has been studied by ac susceptibility and dc magnetization measurements. It is found that critical current density and irreversibility field of MgB{sub 2} have been significantly improved by doping C and Ti concurrently, sharply contrasted to the situation of C-only-doped or Ti-only-doped MgB{sub 2} samples. AC susceptibility measurement reveals that the dependence of the pinning potential on the dc applied field of Mg{sub 0.95}Ti{sub 0.05}B{sub 1.95}C{sub 0.05} has been determined to be U(B{sub dc}){proportional_to}B{sub dc}{sup -1} compared to that of MgB{sub 2}U(B{sub dc}){proportional_to}B{sub dc}{sup -1.5}. As to the U(J) behavior, a relationship of U(J) {proportional_to} J{sup -0.17} is found fitting well for Mg{sub 0.95}Ti{sub 0.05}B{sub 1.95}C{sub 0.05} with respect to U(J) {proportional_to} J{sup -0.21} for MgB{sub 2}. All the results reveal a strong enhancement of the high field pinning potential in C and Ti co-doped MgB{sub 2}.

  18. Hydrogen storage in binary and ternary Mg-based alloys: A comprehensive experimental study

    Energy Technology Data Exchange (ETDEWEB)

    Kalisvaart, W.P.; Harrower, C.T.; Haagsma, J.; Zahiri, B.; Luber, E.J.; Ophus, C.; Mitlin, D. [Chemical and Materials Engineering, University of Alberta and National Research Council Canada, National Institute for Nanotechnology, T6G 2V4, Edmonton, Alberta (Canada); Poirier, E.; Fritzsche, H. [National Research Council Canada, SIMS, Canadian Neutron Beam Centre, Chalk River Laboratories, Chalk River, Ontario, K0J 1J0 (Canada)

    2010-03-15

    This study focused on hydrogen sorption properties of 1.5 {mu}m thick Mg-based films with Al, Fe and Ti as alloying elements. The binary alloys are used to establish as baseline case for the ternary Mg-Al-Ti, Mg-Fe-Ti and Mg-Al-Fe compositions. We show that the ternary alloys in particular display remarkable sorption behavior: at 200 C the films are capable of absorbing 4-6 wt% hydrogen in seconds, and desorbing in minutes. Furthermore, this sorption behavior is stable over cycling for the Mg-Al-Ti and Mg-Fe-Ti alloys. Even after 100 absorption/desorption cycles, no degradation in capacity or kinetics is observed. For Mg-Al-Fe, the properties are clearly worse compared to the other ternary combinations. These differences are explained by considering the properties of all the different phases present during cycling in terms of their hydrogen affinity and catalytic activity. Based on these considerations, some general design principles for Mg-based hydrogen storage alloys are suggested. (author)

  19. Clinical efficacy and safety of a new 1000-mg suspension versus twice-daily 500-mg tablets of MPFF in patients with symptomatic chronic venous disorders: a randomized controlled trial.

    Science.gov (United States)

    Carpentier, Patrick; van Bellen, Bonno; Karetova, Debora; Hanafiah, Harunarashid; Enriquez-Vega, Elizabeth; Kirienko, Alexander; Dzupina, Andrej; Sabovic, Miso; Reina Gutierrez, Lourdes; Subwongcharoen, Somboom; Tüzün, Hasan; Maggioli, Arnaud

    2017-10-01

    Chronic venous disorders (CVD) is estimated to affect 30% to 50% of women and 10% to 30% of men. The most widely prescribed treatment for CVD worldwide is micronized purified flavonoid fraction 500 mg (MPFF). The aim of this clinical trial was to develop a new once daily 1000-mg oral suspension of MPFF. In an international, randomized, double-blind, parallel-group study, symptomatic individuals classified CEAP C0s to C4s were randomized in either treatment arm and treated for 8 weeks. Lower limb symptoms (discomfort, pain and heaviness) were assessed using Visual Analog Scales (VAS), and quality of life (QoL) was measured with the CIVIQ-20 Questionnaire. A total of 1139 patients were included in the study. Both MPFF treatment regimens were well tolerated and associated with a significant reduction in lower limb symptoms. A non-inferiority of MPFF 1000-mg oral suspension once daily compared to MPFF 500-mg tablet twice daily (P1000 mg and -3.37 cm for MPFF 500 mg), leg pain (-3.27 cm for MPFF 1000 mg and -3.31 cm for MPFF 500 mg) and leg heaviness (-3.41 cm for MPFF 1000 mg and -3.46 cm for MPFF 500 mg). The patients' QoL was improved by about 20 points on the CIVIQ scale in both groups (19.33 points for MPFF 1000 mg and 20.28 points for MPFF 500 mg). MPFF 1000-mg oral suspension and MPFF 500-mg tablets treatments were associated with similar reductions in lower limb symptoms and QoL improvement. The new once daily MPFF1000-mg oral suspension has a similar safety profile to two tablets of MPFF 500 mg, with the advantage of one daily intake, potentially associated with improved patient adherence and easier CVD management.

  20. Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants

    International Nuclear Information System (INIS)

    Uddin, M S; Hall, Colin; Murphy, Peter

    2015-01-01

    Due to their excellent biodegradability characteristics, Mg and Mg-based alloys have become an emerging material in biomedical implants, notably for repair of bone as well as coronary arterial stents. However, the main problem with Mg-based alloys is their rapid corrosion in aggressive environments such as human bodily fluids. Previously, many approaches such as control of alloying materials, composition and surface treatments, have been attempted to regulate the corrosion rate. This article presents a comprehensive review of recent research focusing on surface treatment techniques utilised to control the corrosion rate and surface integrity of Mg-based alloys in both in vitro and in vivo environments. Surface treatments generally involve the controlled deposition of thin film coatings using various coating processes, and mechanical surfacing such as machining, deep rolling or low plasticity burnishing. The aim is to either make a protective thin layer of a material or to change the micro-structure and mechanical properties at the surface and sub-surface levels, which will prevent rapid corrosion and thus delay the degradation of the alloys. We have organised the review of past works on coatings by categorising the coatings into two classes—conversion and deposition coatings—while works on mechanical treatments are reviewed based on the tool-based processes which affect the sub-surface microstructure and mechanical properties of the material. Various types of coatings and their processing techniques under two classes of coating and mechanical treatment approaches have been analysed and discussed to investigate their impact on the corrosion performance, biomechanical integrity, biocompatibility and cell viability. Potential challenges and future directions in designing and developing the improved biodegradable Mg/Mg-based alloy implants were addressed and discussed. The literature reveals that no solutions are yet complete and hence new and innovative approaches

  1. Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants

    Science.gov (United States)

    Uddin, M S; Hall, Colin; Murphy, Peter

    2015-01-01

    Due to their excellent biodegradability characteristics, Mg and Mg-based alloys have become an emerging material in biomedical implants, notably for repair of bone as well as coronary arterial stents. However, the main problem with Mg-based alloys is their rapid corrosion in aggressive environments such as human bodily fluids. Previously, many approaches such as control of alloying materials, composition and surface treatments, have been attempted to regulate the corrosion rate. This article presents a comprehensive review of recent research focusing on surface treatment techniques utilised to control the corrosion rate and surface integrity of Mg-based alloys in both in vitro and in vivo environments. Surface treatments generally involve the controlled deposition of thin film coatings using various coating processes, and mechanical surfacing such as machining, deep rolling or low plasticity burnishing. The aim is to either make a protective thin layer of a material or to change the micro-structure and mechanical properties at the surface and sub-surface levels, which will prevent rapid corrosion and thus delay the degradation of the alloys. We have organised the review of past works on coatings by categorising the coatings into two classes—conversion and deposition coatings—while works on mechanical treatments are reviewed based on the tool-based processes which affect the sub-surface microstructure and mechanical properties of the material. Various types of coatings and their processing techniques under two classes of coating and mechanical treatment approaches have been analysed and discussed to investigate their impact on the corrosion performance, biomechanical integrity, biocompatibility and cell viability. Potential challenges and future directions in designing and developing the improved biodegradable Mg/Mg-based alloy implants were addressed and discussed. The literature reveals that no solutions are yet complete and hence new and innovative approaches

  2. Global Investigation of the Mg Atom and ion Layers using SCIAMACHY/Envisat Observations between 70 km and 150 km Altitude and WACCM-MG Model Results

    Science.gov (United States)

    Langowski, M.; vonSavigny, C.; Burrows, J. P.; Feng, W.; Plane, J. M. C.; Marsh, D. R.; Janches, Diego; Sinnhuber, M.; Aikin, A. C.

    2014-01-01

    Mg and Mg+ concentration fields in the upper mesosphere/lower thermosphere (UMLT) region are retrieved from SCIAMACHY/Envisat limb measurements of Mg and Mg+ dayglow emissions using a 2-D tomographic retrieval approach. The time series of monthly means of Mg and Mg+ for number density as well as vertical column density in different latitudinal regions are shown. Data from the limb mesosphere-thermosphere mode of SCIAMACHY/Envisat are used, which covers the 50 km to 150 km altitude region with a vertical sampling of 3.3 km and a highest latitude of 82 deg. The high latitudes are not covered in the winter months, because there is no dayglow emission during polar night. The measurements were performed every 14 days from mid-2008 until April 2012. Mg profiles show a peak at around 90 km altitude with a density between 750 cm(exp-3) and 2000 cm(exp-3). Mg does not show strong seasonal variation at mid-latitudes. The Mg+ peak occurs 5-15 km above the neutral Mg peak at 95-105 km. Furthermore, the ions show a significant seasonal cycle with a summer maximum in both hemispheres at mid- and high-latitudes. The strongest seasonal variations of the ions are observed at mid-latitudes between 20-40 deg and densities at the peak altitude range from 500 cm(exp-3) to 6000 cm(exp-3). The peak altitude of the ions shows a latitudinal dependence with a maximum at mid-latitudes that is up to 10 km higher than the peak altitude at the equator. The SCIAMACHY measurements are compared to other measurements and WACCM model results. In contrast to the SCIAMACHY results, the WACCM results show a strong seasonal variability for Mg with a winter maximum, which is not observable by SCIAMACHY, and globally higher peak densities. Although the peak densities do not agree the vertical column densities agree, since SCIAMACHY results show a wider vertical profile. The agreement of SCIAMACHY and WACCM results is much better for Mg+, showing the same seasonality and similar peak densities. However

  3. Optical and structural properties of ZnO/ZnMgO composite thin films prepared by sol–gel technique

    International Nuclear Information System (INIS)

    Xu, Linhua; Su, Jing; Chen, Yulin; Zheng, Gaige; Pei, Shixin; Sun, Tingting; Wang, Junfeng; Lai, Min

    2013-01-01

    Highlights: ► ZnMgO thin film and ZnO/ZnMgO composite thin film have been prepared by sol–gel method. ► The intensity of ultraviolet emission of ZnMgO thin film is enhanced two times compared with that of pure ZnO thin film. ► Compared with ZnMgO thin film, ZnO/ZnMgO composite thin film shows better crystallization and optical properties. ► ZnO/ZnMgO composite thin films prepared by sol–gel method have potential applications in many optoelectronic devices. - Abstract: In this study, pure ZnO thin film, Mg-doped ZnO (ZnMgO) thin film, ZnO/ZnMgO and ZnMgO/ZnO composite thin films were prepared by sol–gel technique. The structural and optical properties of the samples were analyzed by X-ray diffraction, scanning electron microscopy, UV–visible spectrophotometer, ellipsometer and photoluminescence spectra, respectively. The results showed that the incorporation of Mg increased the strain, broadened the optical bandgap, and improved the intensity of ultraviolet emission of ZnO thin film. The full width at half maximum (FWHM) of the ultraviolet emission peak was also increased due to Mg-doping at the same time. Compared with pure ZnO and ZnMgO thin films, the ZnO/ZnMgO thin film showed better crystalline quality and ultraviolet emission performance, smaller strains and higher transmittance in the visible range.

  4. Development and properties of duplex MgF2/PCL coatings on biodegradable magnesium alloy for biomedical applications.

    Science.gov (United States)

    Makkar, Preeti; Kang, Hoe Jin; Padalhin, Andrew R; Park, Ihho; Moon, Byoung-Gi; Lee, Byong Taek

    2018-01-01

    The present work addresses the performance of polycaprolactone (PCL) coating on fluoride treated (MgF2) biodegradable ZK60 magnesium alloy (Mg) for biomedical application. MgF2 conversion layer was first produced by immersing Mg alloy substrate in hydrofluoric acid solution. The outer PCL coating was then prepared using dip coating technique. Morphology, elements profile, phase structure, roughness, mechanical properties, invitro corrosion, and biocompatibility of duplex MgF2/PCL coating were then characterized and compared to those of fluoride coated and uncoated Mg samples. The invivo degradation behavior and biocompatibility of duplex MgF2/PCL coating with respect to ZK60 Mg alloy were also studied using rabbit model for 2 weeks. SEM and TEM analysis showed that the duplex coating was uniform and comprised of porous PCL film (~3.3 μm) as upper layer with compact MgF2 (~2.2 μm) as inner layer. No significant change in microhardness was found on duplex coating compared with uncoated ZK60 Mg alloy. The duplex coating showed improved invitro corrosion resistance than single layered MgF2 or uncoated alloy samples. The duplex coating also resulted in better cell viability, cell adhesion, and cell proliferation compared to fluoride coated or uncoated alloy. Preliminary invivo studies indicated that duplex MgF2/PCL coating reduced the degradation rate of ZK60 Mg alloy and exhibited good biocompatibility. These results suggested that duplex MgF2/PCL coating on magnesium alloy might have great potential for orthopedic applications.

  5. Characterization of the thermoluminescent detectors LiF:Mg,Cu,P. Environmental dosimetry applications

    International Nuclear Information System (INIS)

    Ciocci Brazzano, Ligia; Gregori, Beatriz N.; Papadopulos, Susana B.; Carelli, Jorge L.

    2005-01-01

    Studies on thermal-luminescent properties of the LiF:Mg detectors, Cu, P enrichment with Li-7 (99.93% of Li-7 and 0.07% of Li-6): optimization of the heating profile, loss of information, detection limit and doses and energy responses are presented in this work. Their performance is compared with LiF:Mg detectors, Mg, Ti enriched with Li-7 (99.93% of Li-7 and 0.07% Li-6), which are at present used for environmental dosimetry at the Physics Dosimetry Laboratory of the Nuclear Regulatory Authority [es

  6. In vitro and in vivo corrosion, mechanical properties and biocompatibility evaluation of MgF2-coated Mg-Zn-Zr alloy as cancellous screws.

    Science.gov (United States)

    Li, Zhen; Shizhao, Sun; Chen, Minfang; Fahlman, Bradley Dean; Debao Liu; Bi, Hongwei

    2017-06-01

    Magnesium (Mg) and its alloys as biodegradable materials have received much attention in the orthopedics applications; however, the corrosion behavior of these metals in vivo remains challenging. In this work, a dense and nanoscale magnesium fluoride (MgF 2 ) coating was deposited on the surface of Mg-Zn-Zr (MZZ) alloy cancellous screw. The MZZ cancellous screw with MgF 2 coating maintained an integrated shape and high yield tensile stress after 30days immersion in SBF, comparing with the bare screw. Hydrogen releasing rate of the MZZ samples was suppressed at a lower level at the initial stage, which is in favour of the adhesion of the cells. And in vivo experiments indicated that MgF 2 -coated MZZ screws presented advantages in cytocompatibility, osteoconductivity and osteogenesis of cancellous bone in rabbits. Corrosion rate in vivo perfusion environment increased very slowly with time in long-term study, which was an opposite trend in vitro static immersion test. Moreover, maximum corrosion rate (CR max ), a critical calculation method of corrosion rate was introduced to predict fracture regions of the sample. The MZZ alloy with MgF 2 coating possesses a great potential for clinical applications for internal fracture fixation repair. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Magnesium diboride(MgB2) wires for applications

    International Nuclear Information System (INIS)

    Patel, Dipak; Kim, Jung Ho

    2016-01-01

    Field and temperature dependence of the critical current density, Jc, were measured for both un-doped and carbon doped MgB 2 /Nb/Monel wires manufactured by Hyper Tech Research, Inc. In particular, carbon incorporation into the MgB 2 structure using malic acid additive and a chemical solution method can be advantageous because of the highly uniform mixing between the carbon and boron powders. At 4.2 K and 10 T, Jc was estimated to be 25,000 - 25,300 Acm -2 for the wire sintered at 600 degrees C for 4 hours. The irreversibility field, Birr, of the malic acid doped wire was approximately 21.0 - 21.8 T, as obtained from a linear extrapolation of the J-B characteristic. Interestingly enough, the Jc of the malic acid doped sample exceeds 10 5 Acm -2 at 6 T and 4.2 K, which is comparable to that of commercial Nb-Ti wires

  8. Magnesium diboride(MgB{sub 2}) wires for applications

    Energy Technology Data Exchange (ETDEWEB)

    Patel, Dipak; Kim, Jung Ho [Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong, North Wollongong (Australia)

    2016-03-15

    Field and temperature dependence of the critical current density, Jc, were measured for both un-doped and carbon doped MgB{sub 2}/Nb/Monel wires manufactured by Hyper Tech Research, Inc. In particular, carbon incorporation into the MgB{sub 2} structure using malic acid additive and a chemical solution method can be advantageous because of the highly uniform mixing between the carbon and boron powders. At 4.2 K and 10 T, Jc was estimated to be 25,000 - 25,300 Acm{sup -2} for the wire sintered at 600 degrees C for 4 hours. The irreversibility field, Birr, of the malic acid doped wire was approximately 21.0 - 21.8 T, as obtained from a linear extrapolation of the J-B characteristic. Interestingly enough, the Jc of the malic acid doped sample exceeds 10{sup 5} Acm{sup -2} at 6 T and 4.2 K, which is comparable to that of commercial Nb-Ti wires.

  9. Simple preparation of LiF:Mg,Ti phosphor

    International Nuclear Information System (INIS)

    Moharil, S.V.; Shahare, D.I.; Upaded, S.V.; Deshmukh, B.T.

    1993-01-01

    LiF-TLD 100 is a low-impedance (Z eff = 8.2) tissue equivalent material which is widely used in thermoluminescence (TL) dosimetry of ionizing radiations and personnel monitoring. Mg and Ti have been found to be the major impurities which impart the Tl characteristics. Recipes for the preparation of this phosphor, have not been found to be satisfactory for routine manufacture; there have always been problems associated with reproducibility and even with batch homogeneity. One of the reasons for this is that most procedures start either from readily available LiF or by melting the synthesized LiF, or both. The background impurities in the starting LiF powder can mask the intentional impurities, particularly Ti which has to be doped in rather small concentrations (10 p.p.m.). Melting LiF can again be tricky, as the LiF melt is volatile and highly corrosive. In this letter we report the preparation of LiF: Mg, Ti. The impurities were incorporated during the synthesis of LiF. The phosphor was prepared by heat treatments in ambient air without melting the compound. The characteristics of the prepared phosphors were studied and compared with those of LiF-TLD 100. (author)

  10. Performance of Mg-14Li-1Al-0.1Ce as anode for Mg-air battery

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Yibin; Li, Deyu [School of Chemical Engineering and Technology, Harbin Institute of Technology, West Street No. 92, Harbin 150001 (China); Li, Ning [School of Chemical Engineering and Technology, Harbin Institute of Technology, West Street No. 92, Harbin 150001 (China); Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001 (China); Zhang, Milin; Huang, Xiaomei [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001 (China)

    2011-02-15

    In this research, a new Mg-air battery based on Mg-14Li-1Al-0.1Ce was prepared and the battery performance was investigated by constant current discharge test. The corrosion behavior of Mg, AZ31 and Mg-Li-Al-Ce were studied by self-corrosion rate measurement and potentiodynamic polarization measurement. The characteristics of Mg-Li-Al-Ce after discharge were investigated by electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results show that Mg-Li-Al-Ce is more active than Mg and AZ31. The self-corrosion rate is found to be in the order: Mg-Li-Al-Ce < Mg < AZ31. It has been observed that the Mg-air battery based on Mg-Li-Al-Ce offers higher operating voltage, anodic efficiency and capacity than those with Mg and AZ31. SEM and EIS results show that the discharge product of Mg-Li-Al-Ce is loosely adhered to the alloy surface, and thus Mg-Li-Al-Ce could keep high discharge activity during discharge. (author)

  11. Photodissociation spectroscopy of the Mg+-acetic acid complex

    Science.gov (United States)

    Abate, Yohannes; Kleiber, P. D.

    2006-11-01

    We have studied the structure and photodissociation of Mg+-acetic acid clusters. Ab initio calculations suggest four relatively strongly bound ground state isomers for the [MgC2H4O2]+ complex. These isomers include the cis and trans forms of the Mg+-acetic acid association complex with Mg+ bonded to the carbonyl O atom of acetic acid, the Mg+-acetic acid association complex with Mg+ bonded to the hydroxyl O atom of acetic acid, or to a Mg+-ethenediol association complex. Photodissociation through the Mg+-based 3p←3s absorption bands in the near UV leads to direct (nonreactive) and reactive dissociation products: Mg+, MgOH+, Mg(H2O )+, CH3CO+, and MgCH3+. At low energies the dominant reactive quenching pathway is through dehydration to Mg(H2O)+, but additional reaction channels involving C-H and C-C bond activation are also open at higher energies.

  12. Thermoluminescence responses of photon- and electron-irradiated lithium potassium borate co-doped with Cu+Mg or Ti+Mg

    International Nuclear Information System (INIS)

    Alajerami, Y.S.M.; Hashim, S.; Ramli, A.T.; Saleh, M.A.; Saripan, M.I.; Alzimami, K.; Min Ung, Ngie

    2013-01-01

    New glasses Li 2 CO 3 –K 2 CO 3 –H 3 BO 3 (LKB) co-doped with CuO and MgO, or with TiO 2 and MgO, were synthesized by the chemical quenching technique. The thermoluminescence (TL) responses of LKB:Cu,Mg and LKB:Ti,Mg irradiated with 6 MV photons or 6 MeV electrons were compared in the dose range 0.5–4.0 Gy. The standard commercial dosimeter LiF:Mg,Ti (TLD-100) was used to calibrate the TL reader and as a reference in comparison of the TL properties of the new materials. The dependence of the responses of the new materials on 60 Co dose is linear in the range of 1–1000 Gy. The TL yields of both of the co-doped glasses and TLD-100 are greater for electron irradiation than for photon irradiation. The TL sensitivity of LKB:Ti,Mg is 1.3 times higher than the sensitivity of LKB:Cu,Mg and 12 times less than the sensitivity of TLD-100. The new TL dosimetric materials have low effective atomic numbers, good linearity of the dose responses, excellent signal reproducibility, and a simple glow curve structure. This combination of properties makes them suitable for radiation dosimetry. - Highlights: • Enhancement of about three times has been shown with the increment of MgO. • A comparison was carried out between the TL responses of the prepared dosimeters and TLD-100. • The prepared dosimeters show simple glow curve, low Z material and excellent reproducibility. • The TL measurements show a linear dose response in a long span of exposures. • The electron response shows 1.18 times greater than photon response for the prepared dosimeters

  13. Perbandingan Pemberian Ondansetron 8 mg dengan Tramadol 1 mg/ kgBB Intravena untuk Mencegah Menggigil Pascaanestesi Umum pada Operasi Mastektomi Radikal atau Modifikasi

    Directory of Open Access Journals (Sweden)

    Mirza Oktavian

    2014-04-01

    Full Text Available ost anesthetic shivering is a common complication of general anesthesia and preventable with several types of drugs. The aim of this study was to compare the efficacy of intravenous 8mg ondansetron versus tramadol 1 mg/kgBW in preventing post anesthetic shivering after general anesthesia. The research is a prospective, randomized double-blind controlled study involving 38 female patients aged 30–65 years at Dr. Hasan Sadikin Hospital Bandung period March–April 2012, American Society of Anesthesiologist (ASA physical status I–II, who underwent radical or modified mastectomy. Subjects were randomly divided into two groups. One group was given ondansetron 8 mg and the other group was given tramadol 1 mg/kgBW before surgical wound closure. Research results showed that incidence of post anesthetic shivering was less on tramadol group (15.8% compared to ondansetron (52.6% group, which is statistically significant (p<0.05. In conclusion, administration of tramadol 1 mg/kgBW intravenously is more effective in preventing post anesthetic shivering in radical or modified mastectomy.

  14. Thermodynamic properties of Mg2Si and Mg2Ge investigated by first principles method

    International Nuclear Information System (INIS)

    Wang, Hanfu; Jin, Hao; Chu, Weiguo; Guo, Yanjun

    2010-01-01

    The lattice dynamics and thermodynamic properties of Mg 2 Si and Mg 2 Ge are studied based on the first principles calculations. We obtain the phonon dispersion curves and phonon density of states spectra using the density functional perturbation theory with local density approximations. By employing the quasi-harmonic approximation, we calculate the temperature dependent Helmholtz free energy, bulk modulus, thermal expansion coefficient, specific heat, Debye temperature and overall Grueneisen coefficient. The results are in good agreement with available experimental data and previous theoretical studies. The thermal conductivities of both compounds are then estimated with the Slack's equation. By carefully choosing input parameters, especially the acoustic Debye temperature, we find that the calculated thermal conductivities agree fairly well with the experimental values above 80 K for both compounds. This demonstrates that the lattice thermal conductivity of simple cubic semiconductors may be estimated with satisfactory accuracy by combining the Slack's equation with the necessary thermodynamics parameters derived completely from the first principles calculations.

  15. Mg-enriched erythrite from Bou Azzer, Anti-Atlas Mountains, Morocco: geochemical and spectroscopic characteristics

    Science.gov (United States)

    Dumańska-Słowik, Magdalena; Pieczka, Adam; Natkaniec-Nowak, Lucyna; Kunecki, Piotr; Gaweł, Adam; Heflik, Wiesław; Smoliński, Wojciech; Kozub-Budzyń, Gabriela

    2018-06-01

    Supergene Mg-enriched erythrite, with an average composition (Co2.25Mg0.58Ni0.14Fe0.04Mn0.02 Zn0.02) (As1.97PMorocco. The unit cell parameters of monoclinic Mg-enriched erythrite [space group C2/ m, a = 10.252(2) Å, b = 13.427(3) Å, c = 4.757(3) Å, ß = 105.12(1)°] make the mineral comparable with erythrite from other localities. The composition of the sample represents the solid solution between erythrite, hörnesite and annabergite, that is, the nearest to the endmember erythrite. However, Mg-enriched erythrite forming the crystal exhibits variable compositions, especially in Mg and Co contents, with Mg increasing from 0.32 up to 1.39 apfu, and Co decreasing from 2.53 to 1.50 apfu, which manifests in the fine compositional oscillatory zoning. It is the highest content of Mg in erythrite structure reported so far. The most intensive Raman active ν3 and ν1 bands, recorded for the crystal's zones with maximum Mg contents, occur at 865 and 800 cm- 1 and are shifted towards higher wavenumbers, where normally hörnesite Raman bands appear. The characteristic oscillatory zoning texture results from varying contents of main and trace elements mobilized from the host ores (Co arsenides, mainly skutterudite) and rock-forming minerals (among others, dolomite) by the solutions in the oxidation zone of the ore deposits. The heating of the Mg-enriched erythrite up to 1000 °C leads to the crystallization of the water-free (Co,Mg)3(AsO4)2 phase.

  16. A RESTful API for accessing microbial community data for MG-RAST.

    Directory of Open Access Journals (Sweden)

    Andreas Wilke

    2015-01-01

    Full Text Available Metagenomic sequencing has produced significant amounts of data in recent years. For example, as of summer 2013, MG-RAST has been used to annotate over 110,000 data sets totaling over 43 Terabases. With metagenomic sequencing finding even wider adoption in the scientific community, the existing web-based analysis tools and infrastructure in MG-RAST provide limited capability for data retrieval and analysis, such as comparative analysis between multiple data sets. Moreover, although the system provides many analysis tools, it is not comprehensive. By opening MG-RAST up via a web services API (application programmers interface we have greatly expanded access to MG-RAST data, as well as provided a mechanism for the use of third-party analysis tools with MG-RAST data. This RESTful API makes all data and data objects created by the MG-RAST pipeline accessible as JSON objects. As part of the DOE Systems Biology Knowledgebase project (KBase, http://kbase.us we have implemented a web services API for MG-RAST. This API complements the existing MG-RAST web interface and constitutes the basis of KBase's microbial community capabilities. In addition, the API exposes a comprehensive collection of data to programmers. This API, which uses a RESTful (Representational State Transfer implementation, is compatible with most programming environments and should be easy to use for end users and third parties. It provides comprehensive access to sequence data, quality control results, annotations, and many other data types. Where feasible, we have used standards to expose data and metadata. Code examples are provided in a number of languages both to show the versatility of the API and to provide a starting point for users. We present an API that exposes the data in MG-RAST for consumption by our users, greatly enhancing the utility of the MG-RAST service.

  17. TL and OSL studies of carbon doped magnesium aluminate (MgAl2O4:C)

    Science.gov (United States)

    Raj, Sanu S.; Mishra, D. R.; Soni, Anuj; Grover, V.; Polymeris, G. S.; Muthe, K. P.; Jha, S. K.; Tyagi, A. K.

    2016-10-01

    The MgAl2O4:C has been synthesized by using two different methods by electron gun and vacuum assisted melting of MgAl2O4 in presence of graphite. The MgAl2O4:C phosphor thus developed by these two different methods have similar types of the TL/OSL defects with multiple overlapping TL glow peaks from 100 °C to 400 °C. The Computerized Curve De-convolution Analysis (CCDA) has been used to measure TL parameters such as thermal trap depth, frequency factor and order of kinetic associated with charge transfer process in TL phenomenon. The investigated TL/OSL results show that these two methods of incorporating carbon in MgAl2O4 have generated closely resemble the defects of similar types in MgAl2O4:C lattice. However, the MgAl2O4:C synthesized by electron gun shows relatively larger concentration of the TL/OSL defects as compared to MgAl2O4:C synthesized using vacuum assisted melting method. The photo-ionization cross-section (PIC) associated with fastest OSL component of MgAl2O4: C is found to be ∼ 0.5 times than that of fastest OSL component of commercially available dosimetric grade α-Al2O3:C. The MgAl2O4:C thus developed shows good dynamic OSL dose linearity from few mGy to 1 Gy. This work reveals that MgAl2O4:C could be developed as potential tissue equivalent OSL / TL material.

  18. DISSOLUTION BEHAVIOR OF BIOACTIVE GLASS CERAMICS WITH DIFFERENT CaO/MgO RATIOS

    Directory of Open Access Journals (Sweden)

    MUHAMMAD USMAN HASHMI

    2010-03-01

    Full Text Available In this work, powders of three different compositions, each having 34 SiO2-14.5 P2O5-1 CaF2-0.5 MgF (% wt and ratio of CaO/MgO varying from 11.5:1 to 1:11.5 were thoroughly mixed and melted under oxy-acetylene flame in a fire clay crucible that made the glass formation cheaper in time and cost. The melt of each composition was quenched in water to form three different glasses. Every glass was sintered at 950°C to form three glass ceramics named G1, G2 and G3 respectively. To study the dissolution behavior, each sample was immersed in a simulated body fluid (SBF for 2, 5, 10, 20 and 25 days at room temperature. Thin film XRD analysis revealed that the samples with larger CaO/MgO ratio exhibited better bioactivity. pH of SBF increased efficiently in case of G1 whereas in case of G2 and G3, this increase was slower due to greater amount of MgO. The concentrations of Ca, P, Mg and Si ions were measured by Atomic Absorption Spectroscopy. EDS analysis showed the increase in P and Ca ions and presence of C in G1 after 5 days immersion and after 10 days, in case of G2 indicating the higher formation rate of hydroxycarbonate Apatite layer in G1 as compared to G2 due to greater CaO/MgO ratio whereas in G3 Mg-hydroxycarbonate apatite (Ca(Mg5(CO3(PO43(OH (heneuite layer was recognized after 20 days showing the least bioactivity due to very large amount of Mg and the least CaO/MgO ratio.

  19. A RESTful API for accessing microbial community data for MG-RAST.

    Science.gov (United States)

    Wilke, Andreas; Bischof, Jared; Harrison, Travis; Brettin, Tom; D'Souza, Mark; Gerlach, Wolfgang; Matthews, Hunter; Paczian, Tobias; Wilkening, Jared; Glass, Elizabeth M; Desai, Narayan; Meyer, Folker

    2015-01-01

    Metagenomic sequencing has produced significant amounts of data in recent years. For example, as of summer 2013, MG-RAST has been used to annotate over 110,000 data sets totaling over 43 Terabases. With metagenomic sequencing finding even wider adoption in the scientific community, the existing web-based analysis tools and infrastructure in MG-RAST provide limited capability for data retrieval and analysis, such as comparative analysis between multiple data sets. Moreover, although the system provides many analysis tools, it is not comprehensive. By opening MG-RAST up via a web services API (application programmers interface) we have greatly expanded access to MG-RAST data, as well as provided a mechanism for the use of third-party analysis tools with MG-RAST data. This RESTful API makes all data and data objects created by the MG-RAST pipeline accessible as JSON objects. As part of the DOE Systems Biology Knowledgebase project (KBase, http://kbase.us) we have implemented a web services API for MG-RAST. This API complements the existing MG-RAST web interface and constitutes the basis of KBase's microbial community capabilities. In addition, the API exposes a comprehensive collection of data to programmers. This API, which uses a RESTful (Representational State Transfer) implementation, is compatible with most programming environments and should be easy to use for end users and third parties. It provides comprehensive access to sequence data, quality control results, annotations, and many other data types. Where feasible, we have used standards to expose data and metadata. Code examples are provided in a number of languages both to show the versatility of the API and to provide a starting point for users. We present an API that exposes the data in MG-RAST for consumption by our users, greatly enhancing the utility of the MG-RAST service.

  20. Relativistic quasiparticle band structures of Mg2Si, Mg2Ge, and Mg2Sn: Consistent parameterization and prediction of Seebeck coefficients

    Science.gov (United States)

    Shi, Guangsha; Kioupakis, Emmanouil

    2018-02-01

    We apply density functional and many-body perturbation theory calculations to consistently determine and parameterize the relativistic quasiparticle band structures of Mg2Si, Mg2Ge, and Mg2Sn, and predict the Seebeck coefficient as a function of doping and temperature. The quasiparticle band gaps, including spin-orbit coupling effects, are determined to be 0.728 eV, 0.555 eV, and 0.142 eV for Mg2Si, Mg2Ge, and Mg2Sn, respectively. The inclusion of the semicore electrons of Mg, Ge, and Sn in the valence is found to be important for the accurate determination of the band gaps of Mg2Ge and Mg2Sn. We also developed a Luttinger-Kohn Hamiltonian and determined a set of band parameters to model the near-edge relativistic quasiparticle band structure consistently for all three compounds that can be applied for thermoelectric device simulations. Our calculated values for the Seebeck coefficient of all three compounds are in good agreement with the available experimental data for a broad range of temperatures and carrier concentrations. Our results indicate that quasiparticle corrections are necessary for the accurate determination of Seebeck coefficients at high temperatures at which bipolar transport becomes important.

  1. Decomposition of supersaturated solid solutions Mg-Ho and Mg-Gd

    International Nuclear Information System (INIS)

    Sukhanov, V.D.; Dobromyslov, A.V.; Rokhlin, L.L.; Dobatkina, T.V.

    2002-01-01

    Methods of electron microscopy and X-ray diffraction analysis are applied to study ageing magnesium base alloys with holmium and gadolinium. It is shown that the precipitation of supersaturated Mg base solid solutions goes through several subsequent stages and is accompanied by a considerable precipitation hardening effect at the stage of metastable phase precipitation. The influence of aging time and temperature on precipitation kinetics is established [ru

  2. Surface studies of Li-ion and Mg battery electrodes

    Science.gov (United States)

    Esbenshade, Jennifer

    This dissertation focuses on studies of the surfaces of both Li-ion and Mg-ion battery electrodes. A fundamental understanding of processes occurring at the electrode surface is vital to the development of advanced battery systems. Additionally, modifications to the electrode surfaces are made and further characterized for improved performance. LiMn2O4 Cathodes for Li-ion Batteries: Effect of Mn in electrolyte on anode and Au coating to minimize dissolution: LiMn2O4 (LMO) is known to dissolve Mn ions with cycling. This section focuses on both the effect of the dissolution of Mn2+ into the electrolyte as well as Au coating on the LMO to improve electrochemical performance. Electrochemical quartz crystal microbalance (EQCM) was used to monitor changes in mass on the anode, SEM and AES were used to observe changes in surface morphology and chemical composition, and potentiostatic voltammetry was used to monitor charge and discharge capacity. The effect of Cu2+ addition in place of Mn2+ was also studied, as Cu is known to form an underpotential deposition (UPD) monolayer on Au electrodes. Following this, LMO particles were coated with a Au shell by a simple and scalable electroless deposition for use as Li-ion battery cathodes. The Au shell was intended to limit the capacity fade commonly seen with LMO cathodes by reducing the dissolution of Mn. Characterization by SEM, TEM, EELS, and AFM showed that the Au shell was approximately 3 nm thick. The Au shell prevented much of the Mn from dissolving in the electrolyte with 82% and 88% less dissolved Mn in the electrolyte at room temperature and 65 ºC, respectively, as compared to the uncoated LMO. Electrochemical performance studies with half cells showed that the Au shell maintained a higher discharge capacity over 400 cycles by nearly 30% with 110 mA hr g-1 for the 400th cycle as compared to a commercial LMO at 85 mA hr g-1. Similarly, the capacity fade was reduced in full cells: the coated LMO had 47% greater capacity

  3. Simulation of precipitation and strengthening in MG-RE alloys

    OpenAIRE

    Liu, Hong

    2017-01-01

    Magnesium - rare earth (Mg-RE) alloys have received considerable attention in the past decades for wider applications in the aerospace industry due to their relatively high strength and excellent creep resistance. Most rare-earth containing magnesium alloys, such as Mg-Y, Mg-Gd, and Mg-Y-Nd, are precipitation hardenable. A technical barrier to the wider applications of such alloys is the lack of a sufficiently large age hardening response. To further improve this response, an improved underst...

  4. Combinatorial search for hydrogen storage alloys: Mg-Ni and Mg-Ni-Ti

    Energy Technology Data Exchange (ETDEWEB)

    Oelmez, Rabia; Cakmak, Guelhan; Oeztuerk, Tayfur [Dept. of Metallurgical and Materials Engineering, Middle East Technical University, 06531 Ankara (Turkey)

    2010-11-15

    A combinatorial study was carried out for hydrogen storage alloys involving processes similar to those normally used in their fabrication. The study utilized a single sample of combined elemental (or compound) powders which were milled and consolidated into a bulk form and subsequently deformed to heavy strains. The mixture was then subjected to a post annealing treatment, which brings about solid state reactions between the powders, yielding equilibrium phases in the respective alloy system. A sample, comprising the equilibrium phases, was then pulverized and screened for hydrogen storage compositions. X-ray diffraction was used as a screening tool, the sample having been examined both in the as processed and the hydrogenated state. The method was successfully applied to Mg-Ni and Mg-Ni-Ti yielding the well known Mg{sub 2}Ni as the storage composition. It is concluded that a partitioning of the alloy system into regions of similar solidus temperature would be required to encompass the full spectrum of equilibrium phases. (author)

  5. The catalytic destruction of antibiotic tetracycline by sulfur-doped manganese oxide (S-MgO) nanoparticles.

    Science.gov (United States)

    Moussavi, Gholamreza; Mashayekh-Salehi, Ali; Yaghmaeian, Kamyar; Mohseni-Bandpei, Anoshiravan

    2018-03-15

    The present study evaluates the efficacy of S-doped MgO (S-MgO) as compared with the plain MgO as a catalyst for destructive removal of tetracycline (TTC) in aqueous solutions. The S-MgO had around 6% S in its structure. Doping MgO with S caused increase in surface oxygen vacancy defects. Adding S-MgO (12 g/L) to a TTC aqueous solution (50 mg/L) caused removal of around 99% TTC at the neutral pH (ca. 5.1) and a short reaction time of 10 min. In comparison, plain MgO could remove only around 15% of TTC under similar experimental conditions. Diffusing O 2 into the TTC solution under the reaction with S-MgO resulted in a considerable improvement of TTC removal as compared to diffusing N 2 . Complete removal of TTC and 86.4% removal of its TOC could be obtained using 2 g/L S-MgO nanoparticles. The removal of TTC increased with the increase in solution temperature. The presence of nitrate, sulfate and chloride did not considerably affect the removal of TTC using S-MgO while TTC removal significantly decreased at the presence of bicarbonate and phosphate. The S-MgO was a stable and reusable catalyst exhibiting much higher catalytic activity than plain MgO for the TTC destruction. Accordingly, S-MgO is an emerging and efficient catalyst for catalytic decomposition and mineralization of such pharmaceutical compounds as TTC under atmospheric temperature and pressure. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Evaluation of E2 form factor = 24Mg

    International Nuclear Information System (INIS)

    Marinelli, J.R.; Moreira, J.R.

    1988-11-01

    Longitudinal and transverse electron scattering form factors for the 2 + state at 1.37 Mev of the 24 Mg nucleus was evaluated with rotational model wavefunctions. Four different approaches were used for the transverse E2 form factor: PHF, cranking model, ridig rotor and irrotational flow. For the nuclear intrinsic wavefunction, the Nilsson model was assumed in all approaches yielding the calculation of the form factor in PWBA and DWBA. The results are discussed and compared with a recent measurement performed with 180 0 electron scattered from this state. The DWBA calculation, taking into account first order corrections shows that PHF and irrotational flow models give the best agreements with the available data and compete in quality with more complex calculation performed under the 'shell model' approach. (author) [pt

  7. The effect of Si on precipitation in Al–Cu–Mg alloy with a high Cu/Mg ratio

    International Nuclear Information System (INIS)

    Liu, L.; Chen, J.H.; Wang, S.B.; Liu, C.H.; Yang, S.S.; Wu, C.L.

    2014-01-01

    The precipitations in an Al–5.0Cu–0.3Mg (wt%) alloy and an Al–5.0Cu–0.3Mg–0.3Si (wt%) alloy have been systematically investigated by high-angle annular dark-field scanning transmission electron microscopy. The results are compared to clarify the effect of Si addition. The nucleation and growth process of θ′ (Al 2 Cu) phase in Si-containing alloy during isothermal ageing at 180 °C is revealed in detail. The formation of Q″-type precipitates, on which the θ′ precursors nucleate heterogeneously, contributes to the considerable increase in the ageing kinetics and higher strength at the early ageing stage. The thickening of the θ′ precipitate is largely confined due to the rather small size of fine Q″-type precipitate. As a result, a large proportion of θ′ phase precipitates possess a specific thickness of 2c θ′ and change slightly during the entire observed duration of ageing. The θ′ growth mechanism distinct from the Al–Cu–Mg alloy finally leads to a refined θ′ morphology regarding the thickness and aspect ratio (diameter/thickness). As is counterintuitive, the θ′ precipitate thickness distribution is demonstrated to have little effect on the mechanical property steadiness at the late ageing stage of the Al–Cu–Mg–(Si) alloys

  8. Mg-lattice associations in red coralline algae

    Science.gov (United States)

    Kamenos, N. A.; Cusack, M.; Huthwelker, T.; Lagarde, P.; Scheibling, R. E.

    2009-04-01

    Recent investigations have shown red coralline algae to record ambient temperature in their calcite skeletons. Temperature recorded by variation in Mg concentrations within algal growth bands has sub-annual resolution and high accuracy. The conversion of Mg concentration to temperature is based on the assumption of Ca replacement by Mg within the algal calcite skeleton at higher temperatures. While Mg-temperature relationships in coralline algae have been calibrated for some species, the location of Mg within the calcite lattice remains unknown. Critically, if Mg is not a lattice component but associated with organic components this could lead to erroneous temperature records. Before coralline algae are used in large scale climate reconstructions it is therefore important to determine the location of Mg. Synchrotron Mg-X-ray absorbance near edge structure (XANES) indicates that Mg is associated with the calcite lattice in Lithothamnion glaciale (contemporary free-living, contemporary encrusting and sub-fossil free-living) and Phymatolithon calcareum (contemporary free-living) coralline algae. Mg is deposited within the calcite lattice in all seasons ( L. glaciale & P. calcareum) and thallus areas ( P. calcareum). These results suggest L. glaciale and P. calcareum are robust Mg-palaeotemperature proxies. We suggest that similar confirmation be obtained for Mg associations in other species of red coralline algae aiding our understanding of their role in climate reconstruction at large spatial scales.

  9. The difference of contrast effects of myelography in normal dogs: Comparison of iohexol (180 mgI/ml), iohexol (240 mgI/ml) and iotrolan (240 mgI/ml)

    International Nuclear Information System (INIS)

    Shimizu, J.; Yamada, K.; Kishimoto, M.; Iwasaki, T.; Miyake, Y.

    2008-01-01

    The contrast effects of three different contrast media preparations (iohexol 180 mgI/ml, iohexol 240 mgI/ml and iotrolan 240 mgI/ml) in conventional and CT myelography were compared. Three beagle dogs were used and the study employed a cross-over method (total of 9) for each contrast media. The result of CT myelography showed that the contrast effect of iohexol (180 mgI/ml), which had low viscosity, was highest in cranial sites, and the contrast effect of high-viscosity iotrolan (240 mgI/ml) was highest in caudal sites 5 min after injection of the contrast media preparations. This shows that the diffusion of contrast media preparations in the subarachnoid space is influenced by viscosity. The results of conventional myelography also showed that the diffusion of contrast media preparations is influenced by viscosity. Therefore, it is important to identify the location of spinal lesions in veterinary practice, and low viscosity contrast medium preparation with wide spread contrast effects is considered suitable for myelography

  10. Physician Compare

    Data.gov (United States)

    U.S. Department of Health & Human Services — Physician Compare, which meets Affordable Care Act of 2010 requirements, helps you search for and select physicians and other healthcare professionals enrolled in...

  11. Influence of severe plastic deformation on intermetallic particles in Mg-12 wt.%Zn alloy investigated using transmission electron microscopy

    International Nuclear Information System (INIS)

    Němec, M.; Gärtnerová, V.; Jäger, A.

    2016-01-01

    The in-depth microstructural characterization of intermetallic particles in an Mg-12 wt.%Zn binary alloy subjected to a severe plastic deformation is presented. The alloy was processed by four passes via equal channel angular pressing with an applied back pressure at a gradually decreasing temperature and analyzed using transmission electron microscopy techniques to observe the influence of processing on intermetallic particles. The results are compared with the initial state of the material prior to severe plastic deformation. The microstructural evolution of the α-Mg matrix and the Mg 21 Zn 25 , Mg 51 Zn 20 and MgZn 2 was analyzed using bright field imaging, selected area electron diffraction, high-resolution transmission electron microscopy and high-angle annular dark field imaging in scanning mode. The plastic deformation process influenced the α-Mg matrix and each type of intermetallic particle. The α-Mg matrix consisted of two types of areas. The first type of area had a highly deformed structure, and the second type of area had a partially recrystallized structure with an average grain size of approximately 250 nm. The Mg 21 Zn 25 microparticles exhibited distinct forms in the α-Mg matrix that were characterized as a single-crystalline form, a nano-crystalline form and a broken up form. No evidence of Mg 51 Zn 20 nanoparticles within the α-Mg matrix was found in the microstructure, which indicates their dissolution or phase transformation during the deformation process. MgZn 2 nanoparticles exhibited different behavior in both types of α-Mg matrix. Two orientation relationships toward the highly deformed α-Mg matrix were observed; however, there was no relationship toward the partially recrystallized α-Mg matrix. Additionally, the growth of the MgZn 2 nanoparticles was different in the two types of α-Mg matrix. The Mg 51 Zn 20 nanoparticles inside Mg 21 Zn 25 microparticles exhibited a distinct behavior within the single-crystalline or nano

  12. Enhancing photocatalytic activity by using TiO2-MgO core-shell-structured nanoparticles

    International Nuclear Information System (INIS)

    Jung, Hyun Suk; Lee, Jung-Kun; Nastasi, Michael; Kim, Jeong-Ryeol; Lee, Sang-Wook; Kim, Jin Young; Park, Jong-Sung; Hong, Kug Sun; Shin, Hyunho

    2006-01-01

    Hygroscopic Mg(OH) 2 gel was topotactically decomposed on TiO 2 particle surfaces, resulting in highly nanoporous MgO-coated TiO 2 particles. The highly hygroscopic and nanoporous MgO shell absorbed more water molecules and hydroxyl groups from the environment to yield an improved photocatalytic property of the core-shell particles as compared to the uncoated TiO 2 counterpart

  13. The dependence of Raman scattering on Mg concentration in Mg-doped GaN grown by MBE

    International Nuclear Information System (INIS)

    Flynn, Chris; Lee, William

    2014-01-01

    Magnesium-doped GaN (GaN:Mg) films having Mg concentrations in the range 5 × 10 18 –5 × 10 20 cm −3 were fabricated by molecular beam epitaxy. Raman spectroscopy was employed to study the effects of Mg incorporation on the positions of the E 2 and A 1 (LO) lines identifiable in the Raman spectra. For Mg concentrations in excess of 2 × 10 19 cm −3 , increases in the Mg concentration shift both lines to higher wave numbers. The shifts of the Raman lines reveal a trend towards compressive stress induced by incorporation of Mg into the GaN films. The observed correlation between the Mg concentration and the Raman line positions establish Raman spectroscopy as a useful tool for optimizing growth of Mg-doped GaN. (papers)

  14. MgB2 thick films on three-dimensional structures fabricated by HPCVD

    Science.gov (United States)

    Guo, Zhengshan; Cai, Xingwei; Liao, Xuebin; Chen, Yiling; Yang, Can; Niu, Ruirui; Luo, Wenhao; Huang, Zigeng; Feng, Qingrong; Gan, Zizhao

    2018-06-01

    Magnetic shielding has been a key factor in the measurement of ultra-weak magnetic fields, especially for shielding from low frequency electromagnetic noise. With the recent development of superconducting quantum interference devices, superconducting magnetic shielding has become an important area of research. MgB2 has shown great potential in magnetic shielding for its remarkable superconducting properties, the feasibility of its use in this capacity having been demonstrated by MgB2 bulk samples. However, the potential for application of such bulk samples is limited. In this work, we have investigated the possibility of the fabrication of MgB2 films on three-dimensional (3D) structures using a hybrid physical‑chemical vapor deposition system. MgB2 films 10 μm thick have been fabricated on the outer surface of a polycrystalline Al2O3 cylinder. The deposited film showed a transition temperature (TC) of 39 K and J C of 5.1 × 105 A · cm‑2, which are comparable to those of planar MgB2 films. This work shows the feasibility of depositing MgB2 films onto a 3D structure, and sheds light on the potential use of MgB2 films in superconducting magnetic shielding.

  15. An Efficient, Solvent-Free Process for Synthesizing Anhydrous MgCl2

    Energy Technology Data Exchange (ETDEWEB)

    Motkuri, Radha K.; Vemuri, Venkata Rama S.; Barpaga, Dushyant; Schaef, Herbert T.; Loring, John S.; Martin, Paul F.; Lao, David; Nune, Satish K.; McGrail, Bernard P.

    2018-01-02

    A new efficient and solvent-free method for the synthesis of anhydrous MgCl2 from its hexahydrate is proposed. Fluidized dehydration of MgCl2·6H2O feedstock at 200 °C in a porous bed reactor yields MgCl2·nH2O (0 < n < 1), which has a similar diffraction pattern as activated MgCl2. The MgCl2·nH2O is then ammoniated directly using liquefied NH3 in the absence of solvent to form MgCl2·6NH3. Calcination of the hexammoniate complex at 300 °C then yields anhydrous MgCl2. Both dehydration and deammoniation were thoroughly studied using in situ as well as ex situ characterization techniques. Specifically, a detailed understanding of the dehydration process was monitored by in situ PXRD and in situ FTIR techniques where formation of salt with nH2O (n = 4, 2, 1, <1) was characterized. Given the reduction in thermal energy required to produce dehydrated feedstock with this method compared with current strategies, significant cost benefits are expected. Overall, the combined effect of activation, macroporosity, and coordinated water depletion allows the formation of hexammoniate without using solvent, thus minimizing waste formation.

  16. Tensile and Compressive Responses of Ceramic and Metallic Nanoparticle Reinforced Mg Composites

    Directory of Open Access Journals (Sweden)

    Quy Bau Nguyen

    2013-05-01

    Full Text Available In the present study, room temperature mechanical properties of pure magnesium, Mg/ZrO2 and Mg/(ZrO2 + Cu composites with various compositions are investigated. Results revealed that the use of hybrid (ZrO2 + Cu reinforcements in Mg led to enhanced mechanical properties when compared to that of single reinforcement (ZrO2. Marginal reduction in mechanical properties of Mg/ZrO2 composites were observed mainly due to clustering of ZrO2 particles in Mg matrix and lack of matrix grain refinement. Addition of hybrid reinforcements led to grain size reduction and uniform distribution of hybrid reinforcements, globally and locally, in the hybrid composites. Macro- and micro- hardness, tensile strengths and compressive strengths were all significantly increased in the hybrid composites. With respect to unreinforced magnesium, failure strain was almost unchanged under tensile loading while it was reduced under compressive loading for both Mg/ZrO2 and Mg/(ZrO2 + Cu composites.

  17. Biodegradable Orthopedic Magnesium-Calcium (MgCa Alloys, Processing, and Corrosion Performance

    Directory of Open Access Journals (Sweden)

    Yuebin Guo

    2012-01-01

    Full Text Available Magnesium-Calcium (Mg-Ca alloy has received considerable attention as an emerging biodegradable implant material in orthopedic fixation applications. The biodegradable Mg-Ca alloys avoid stress shielding and secondary surgery inherent with permanent metallic implant materials. They also provide sufficient mechanical strength in load carrying applications as opposed to biopolymers. However, the key issue facing a biodegradable Mg-Ca implant is the fast corrosion in the human body environment. The ability to adjust degradation rate of Mg-Ca alloys is critical for the successful development of biodegradable orthopedic implants. This paper focuses on the functions and requirements of bone implants and critical issues of current implant biomaterials. Microstructures and mechanical properties of Mg-Ca alloys, and the unique properties of novel magnesium-calcium implant materials have been reviewed. Various manufacturing techniques to process Mg-Ca based alloys have been analyzed regarding their impacts on implant performance. Corrosion performance of Mg-Ca alloys processed by different manufacturing techniques was compared. In addition, the societal and economical impacts of developing biodegradable orthopedic implants have been emphasized.

  18. Improved hydrogen storage properties of MgH2 catalyzed with TiO2

    Science.gov (United States)

    Jangir, Mukesh; Meena, Priyanka; Jain, I. P.

    2018-05-01

    In order to improve the hydrogenation properties of the MgH2, various concentration of rutile Titanium Oxide (TiO2) (X wt%= 5, 10, 15 wt %) is added to MgH2 by ball milling and the catalytic effect of TiO2 on hydriding/dehydriding properties of MgH2 has been investigated. Result shows that the TiO2 significantly reduced onset temperature of desorption. Onset temperature as low as 190 °C were observed for the MgH2-15 wt% TiO2 sample which is 60 °C and 160 °C lower than the as-milled and as-received MgH2. Fromm the Kissinger plot the activation energy of 15 wt% TiO2 added sample is calculated to be -75.48 KJ/mol. These results indicate that the hydrogenation properties of MgH2-TiO2 have been improved compared to the as-milled and as-received MgH2. Furthermore, XRD and XPS were performed to characterize the structural evolution upon milling and dehydrogenation.

  19. Influences of Gd on the microstructure and strength of Mg-4.5Zn alloy

    International Nuclear Information System (INIS)

    Yang Jie; Xiao Wenlong; Wang Lidong; Wu Yaoming; Wang Limin; Zhang Hongjie

    2008-01-01

    Microstructure and mechanical properties of peak-aged Mg-4.5Zn-xGd (x 0, 0.5, 1.0 and 1.5 wt.%) alloys have been investigated. The results showed that the grain size of the alloys was refined gradually with increasing Gd. Mg 5 Gd and Mg 3 Gd 2 Zn 3 phases were found in the Gd-containing alloys. The strengths were greatly improved with Gd additions, and the highest strength level was obtained in the Mg-4.5Zn-1.5Gd alloy, in which the ultimate tensile strength and yield strength were 231 MPa and 113 MPa, respectively. Through comparing with the Mg-4.5Zn alloy, the increments of ultimate tensile strength and yield strength were 22 MPa and 56 MPa, respectively. The improved strength was mainly correlated to the grain refining effect, the strengthening effect of the Mg 5 Gd and Mg 3 Gd 2 Zn 3 phases and also the hardening effect of the solutioned Gd atoms

  20. Hydrogen kinetics studies of MgH2-FeTi composites

    Science.gov (United States)

    Meena, Priyanka; Jangir, Mukesh; Singh, Ramvir; Sharma, V. K.; Jain, I. P.

    2018-05-01

    MgH2 + x wt% FeTi (x=10, 25, 50) nano composites were ball milled to get nano structured material and characterized for structural, morphological and thermal properties. XRD of the milled samples revealed the formation of MgH2, FeTi, Fe2Ti and H0.06FeTi phases. Morphological studies by SEM were undertaken to investigate the effect of hydrogenation of nanostructure alloy. EDX confirmed elemental composition of the as-prepared alloy. TGA studies showed higher desorption temperature for milled MgH2 compared to x wt% FeTi added MgH2. Activation energy for hydrogen desorption was found to be -177.90, -215.69, -162.46 and -87.93 kJ/mol for milled MgH2 and Mg2+x wt% FeTi (10, 25, 50), showing 89.97 kJ/ mol reduction in activation energy for 50 wt% alloy additives resulting in improved hydrogen storage capacity. DSC investigations were carried out to investigate the effect of alloy on hydrogen absorption behavior of MgH2.

  1. Evaluation of 500- and 1,000-mg doses of ciprofloxacin for the treatment of chancroid.

    Science.gov (United States)

    Bodhidatta, L; Taylor, D N; Chitwarakorn, A; Kuvanont, K; Echeverria, P

    1988-01-01

    A randomized, double-blind study was performed comparing ciprofloxacin in a 500-mg single dose with 1,000 mg (500-mg doses given 12 h apart) for the treatment of chancroid in Thailand. Haemophilus ducreyi was isolated from 87 (48%) of 180 men with a clinical diagnosis of chancroid. For men with ulcers that were culture positive for H. ducreyi, rates of cure were 100% in the 500-mg group and 98% in the 1,000-mg group. For men with ulcers that were culture negative for H. ducreyi, rates of cure were 93% in the 500-mg group and 96% in the 1,000-mg group. The MIC of ciprofloxacin for 50% of isolates among 85 isolates of H. ducreyi was 0.007 micrograms/ml (range, 0.002 to 0.03 micrograms/ml). No significant adverse effects were detected in either group. These data indicate that both of these treatment regimens are equally effective therapies for chancroid in Thailand. PMID:3293526

  2. Sputter-deposited Mg-Al-O thin films: linking molecular dynamics simulations to experiments

    International Nuclear Information System (INIS)

    Georgieva, V; Bogaerts, A; Saraiva, M; Depla, D; Jehanathan, N; Lebelev, O I

    2009-01-01

    Using a molecular dynamics model the crystallinity of Mg x Al y O z thin films with a variation in the stoichiometry of the thin film is studied at operating conditions similar to the experimental operating conditions of a dual magnetron sputter deposition system. The films are deposited on a crystalline or amorphous substrate. The Mg metal content in the film ranged from 100% (i.e. MgO film) to 0% (i.e. Al 2 O 3 film). The radial distribution function and density of the films are calculated. The results are compared with x-ray diffraction and transmission electron microscopy analyses of experimentally deposited thin films by the dual magnetron reactive sputtering process. Both simulation and experimental results show that the structure of the Mg-Al-O film varies from crystalline to amorphous when the Mg concentration decreases. It seems that the crystalline Mg-Al-O films have a MgO structure with Al atoms in between.

  3. Influence of different ions doping on the antibacterial properties of MgO nanopowders

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Yuanyuan; Wang, Wei, E-mail: weiwang@hust.edu.cn; Tan, Fatang; Cai, Yuncheng; Lu, Junwen; Qiao, Xueliang

    2013-11-01

    Compared with other inorganic antibacterial agents, magnesium oxide (MgO) nanopowders exhibit a unique antibacterial mechanism and various advantages in applications, having attracted extensive attention. In this study, MgO nanopowders doped with different ions (Li{sup +}, Zn{sup 2+} and Ti{sup 4+}) were synthesized by a sol–gel method, respectively. The structures and morphologies of the as-obtained precursors and nanopowders were characterized and confirmed by X-ray diffraction (XRD), transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) analysis. The influence of three metal ions doping on the antibacterial properties of MgO nanopowders was also investigated by their bactericidal activity against Escherichia coli (E. coli, ATCC 25922) using the broth microdilution method and the agar method. The results show that Li-doped MgO exhibits better antibacterial activity, Zn-doped and Ti-doped MgO display poorer antibacterial activity than pure MgO. It can be concluded that the influence of different ions doping on the antibacterial properties of MgO mainly lies on oxygen vacancies and basicity of nanopowders.

  4. Constraints on the ^22Ne(α,n)^25Mg reaction rate from ^natMg+n Total and ^25Mg(n,γ ) Cross Sections

    Science.gov (United States)

    Koehler, Paul

    2002-10-01

    The ^22Ne(α,n)^25Mg reaction is the neutron source during the s process in massive and intermediate mass stars as well as a secondary neutron source during the s process in low mass stars. Therefore, an accurate determination of this rate is important for a better understanding of the origin of nuclides heavier than iron as well as for improving s-process models. Also, because the s process produces seed nuclides for a later p process in massive stars, an accurate value for this rate is important for a better understanding of the p process. Because the lowest observed resonance in direct ^22Ne(α,n)^25Mg measurements is considerably above the most important energy range for s-process temperatures, the uncertainty in this rate is dominated by the poorly known properties of states in ^26Mg between this resonance and threshold. Neutron measurements can observe these states with much better sensitivity and determine their parameters much more accurately than direct ^22Ne(α,n)^25Mg measurements. I have analyzed previously reported Mg+n total and ^25Mg(n,γ ) cross sections to obtain a much improved set of resonance parameters for states in ^26Mg in this region, and an improved estimate of the uncertainty in the ^22Ne(α,n)^25Mg reaction rate. This work was supported by the U.S. DOE under contract No. DE-AC05-00OR22725 with UT-Battell, LLC.

  5. Coherent interface structures and intergrain Josephson coupling in dense MgO/Mg{sub 2}Si/MgB{sub 2} nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, Katsuya; Takahashi, Kazuyuki; Uchino, Takashi, E-mail: uchino@kobe-u.ac.jp [Department of Chemistry, Graduate School of Science, Kobe University, Nada, Kobe 657-8501 (Japan); Nagashima, Yukihito [Nippon Sheet Glass Co., Ltd., Konoike, Itami 664-8520 (Japan); Seto, Yusuke [Department of Planetology, Graduate School of Science, Kobe University, Nada, Kobe 657-8501 (Japan); Matsumoto, Megumi; Sakurai, Takahiro [Center for Support to Research and Education Activities, Kobe University, Nada, Kobe 657-8501 (Japan); Ohta, Hitoshi [Molecular Photoscience Research Center, Kobe University, Nada, Kobe 657-8501 (Japan)

    2016-07-07

    Many efforts are under way to control the structure of heterointerfaces in nanostructured composite materials for designing functionality and engineering application. However, the fabrication of high-quality heterointerfaces is challenging because the crystal/crystal interface is usually the most defective part of the nanocomposite materials. In this work, we show that fully dense insulator (MgO)/semiconductor(Mg{sub 2}Si)/superconductor(MgB{sub 2}) nanocomposites with atomically smooth and continuous interfaces, including epitaxial-like MgO/Mg{sub 2}Si interfaces, are obtained by solid phase reaction between metallic magnesium and a borosilicate glass. The resulting nanocomposites exhibit a semiconductor-superconducting transition at 36 K owing to the MgB{sub 2} nanograins surrounded by the MgO/Mg{sub 2}Si matrix. This transition is followed by the intergrain phase-lock transition at ∼24 K due to the construction of Josephson-coupled network, eventually leading to a near-zero resistance state at 17 K. The method not only provides a simple process to fabricate dense nanocomposites with high-quality interfaces, but also enables to investigate the electric and magnetic properties of embedded superconducting nanograins with good intergrain coupling.

  6. Photoluminescence of Mg_2Si films fabricated by magnetron sputtering

    International Nuclear Information System (INIS)

    Liao, Yang-Fang; Xie, Quan; Xiao, Qing-Quan; Chen, Qian; Fan, Meng-Hui; Xie, Jing; Huang, Jin; Zhang, Jin-Min; Ma, Rui; Wang, Shan-Lan; Wu, Hong-Xian; Fang, Di

    2017-01-01

    Highlights: • High quality Mg_2Si films were grown on Si (111) and glass substrates with magnetron sputtering, respectively. • The first observation of Photoluminescence (PL) of Mg_2Si films was reported. • The Mg_2Si PL emission wavelengths are almost independence on temperature in the range of 77–300 K. • The strongest PL emissions may be attributed to interstitial Mg donor level to valence band transitions. • The activation energy of Mg_2Si is determined from the quenching of major luminescence peaks. - Abstract: To understand the photoluminescence mechanisms and optimize the design of Mg_2Si-based light-emitting devices, Mg_2Si films were fabricated on silicon (111) and glass substrates by magnetron sputtering technique, and the influences of different substrates on the photoelectric properties of Mg_2Si films were investigated systematically. The crystal structure, cross-sectional morphology, composition ratios and temperature-dependent photoluminescence (PL) of the Mg_2Si films were examined using X-ray diffraction (XRD), Scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS) and PL measurement system, respectively. XRD results indicate that the Mg_2Si film on Si (111) displays polycrystalline structure, whereas Mg_2Si film on glass substrate is of like-monocrystalline structure.SEM results show that Mg_2Si film on glass substrate is very compact with a typical dense columnar structure, and the film on Si substrate represents slight delamination phenomenon. EDS results suggest that the stoichiometry of Mg and Si is approximately 2:1. Photoluminescence (PL) of Mg_2Si films was observed for the first time. The PL emission wavelengths of Mg_2Si are almost independence on temperature in the range of 77–300 K. The PL intensity decreases gradually with increasing temperature. The PL intensity of Mg_2Si films on glass substrate is much larger than that of Mg_2Si film on Si (111) substrate. The activation energy of 18 meV is

  7. Study of some Mg-based ferrites as humidity sensors

    International Nuclear Information System (INIS)

    Rezlescu, N; Rezlescu, E; Doroftei, C; Popa, P D

    2005-01-01

    The micostructure and humidity sensitivity of MgFe 2 O 4 + CaO, Mg 0.5 Cu 0.5 Fe 1.8 Ga 0.2 O 4 , Mg 0.5 Zn 0.5 Fe 2 O 4 + KCl and MgMn 0.2 Fe 1.8 O 4 ferrites were investigated. We have found that the humidity sensitivity largely depends on composition, crystallite size, surface area and porosity. The best results concerning humidity sensitivity were obtained for MgMn 0.2 Fe 1.8 O 4 ferrite

  8. Pinning in high performance MgB{sub 2} thin films and bulks: Role of Mg-B-O nano-scale inhomogeneities

    Energy Technology Data Exchange (ETDEWEB)

    Prikhna, Tatiana, E-mail: prikhna@mail.ru [Institute for Superhard Materials of the National Academy of Sciences of Ukraine , 2, Avtozavodskaya Str. , Kiev 07074 (Ukraine); Shapovalov, Andrey [Institute for Superhard Materials of the National Academy of Sciences of Ukraine , 2, Avtozavodskaya Str. , Kiev 07074 (Ukraine); Eisterer, Michael [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Vienna (Austria); Shaternik, Vladimir [G.V. Kurdyumov Institute for Metal Physics of the National Academy of Sciences of Ukraine, 36 Academician Vernadsky blvd., Kiev, 03680 (Ukraine); Goldacker, Wilfried [Karlsruhe Institute of Technology (KIT), 76344 Eggenstein (Germany); Weber, Harald W. [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Vienna (Austria); Moshchil, Viktor; Kozyrev, Artem; Sverdun, Vladimir [Institute for Superhard Materials of the National Academy of Sciences of Ukraine , 2, Avtozavodskaya Str. , Kiev 07074 (Ukraine); Boutko, Viktor [Donetsk Institute for Physics and Engineering named after O.O. Galkin of the National Academy of Sciences of Ukraine, R. Luxemburg str.72, Donetsk-114, 83114 (Ukraine); Grechnev, Gennadiy [B. Verkin Institute for Low Temperature Physics of the National Academy of Sciences of Ukraine, 47, Prospekt Nauky, Kharkiv 61103 (Ukraine); Gusev, Alexandr [Donetsk Institute for Physics and Engineering named after O.O. Galkin of the National Academy of Sciences of Ukraine, R. Luxemburg str.72, Donetsk-114, 83114 (Ukraine); Kovylaev, Valeriy; Shaternik, Anton [Institute for Superhard Materials of the National Academy of Sciences of Ukraine , 2, Avtozavodskaya Str. , Kiev 07074 (Ukraine)

    2017-02-15

    Highlights: • Pinning in MgB{sub 2} depends on the Mg-B-O nano-scaled inhomogeneities. • Finer oxygen-enriched inhomogeneities is the reason of the higher J{sub c} in MgB{sub 2} thin films as compared to bulk. • The results of DOS calculations for MgB{sub 2-x}O{sub x} compounds demonstrate that they have metal-like behavior. • Ordered oxygen distribution in MgB{sub 2} (in pairs or zigzags) reduces binding energy. - Abstract: The comparison of nano-crystalline MgB{sub 2} oxygen-containing thin film (140 nm) and highly dense bulk materials showed that the critical current density, J{sub c}, depends on the distribution of Mg-B-O nano-scale inhomogeneities. It has been shown that MgB{sub 2} bulks with high J{sub c} in low (∼10{sup 6} A/cm{sup 2} in 0-1 T at 10 K) and medium magnetic fields contain MgB{sub 0.6-0.8}O{sub 0.8-0.9} nano-inclusions, where δT{sub c} or a combined δT{sub c} (dominant) / δ{sub l} pinning mechanism prevails, while in bulk MgB{sub 2} with high J{sub c} in high magnetic fields (B{sub irr}(18.5 K) = 15 T, B{sub c2}(0 K) = 42.1 T) MgB{sub 1.2-2.7}O{sub 1.8-2.5} nano-layers are present and δ{sub l} pinning prevails. The structure of oxygen-containing films with high J{sub c} in low and high magnetic fields (J{sub c} (0 T) = 1.8 × 10{sup 7} A/cm{sup 2} and J{sub c} (5 T) = 2 × 10{sup 6} A/cm{sup 2} at 10 K) contains very fine oxygen-enriched Mg-B-O inhomogeneities and δ{sub l} pinning is realized. The results of DOS calculations in MgB{sub 2-x}O{sub x} cells for x = 0, 0.125, 0.25, 0.5, 1 demonstrate that all compounds are conductors with metal-like behaviour. In the case of ordered oxygen substitution for boron the binding energy, E{sub b}, does not increase sufficiently as compared with that for MgB{sub 2}, while when oxygen atoms form zigzag chains the calculated E{sub b} is even lower (E{sub b} = −1.15712 Ry).

  9. Intrinsic Conductivity in Magnesium-Oxygen Battery Discharge Products: MgO and MgO2

    DEFF Research Database (Denmark)

    Smith, Jeffrey G.; Naruse, Junichi; Hiramatsu, Hidehiko

    2017-01-01

    Nonaqueous magnesium–oxygen (or “Mg-air”) batteries are attractive next generation energy storage devices due to their high theoretical energy densities, projected low cost, and potential for rechargeability. Prior experiments identified magnesium oxide, MgO, and magnesium peroxide, MgO2...

  10. A Computational Investigation of Precipitates in Mg-RE Alloys With Applications To Mg-X Systems

    Science.gov (United States)

    Issa, Ahmed

    Increasing fuel efficiency in transportation vehicles is a major policy goal for both government and auto and aerospace manufacturers. Lightweight structural materials, such as magnesium alloys, hold great promise in enabling such fuel efficiency gains. Understanding the controlling factors in Mg alloy strengthening is crucial for the rational design of structurally strong and inexpensive Mg alloys. In this work, we seek to understand the energetic underpinnings giving rise to a class of remarkably strong Mg alloys: Mg-RE systems. We use first-principles methods to efficiently explore seventeen Mg-RE systems, drawing out broad patterns and distilling our knowledge into simple design rules for Mg alloys. We begin by investigating the controlling factors for the Mg-strengthening prismatic plate precipitates in Mg-RE systems, discovering the critical role of strain in such systems. We then proceed to investigate the surprising role of interfacial energies in determining the course of the Mg-RE precipitation reactions. Using strain and interfacial energies, we construct a phase-field model which accurately depicts the precipitate morphology as a function of time and size in a Mg-Nd system. Finally, we combine our gained insights to implement a computational alloy design scheme on a large portion of the periodic table where we seek Mg-strengthening solutes. Our work advances the understanding of strengthening in Mg alloys and lays the groundwork for full scale computational alloy design.

  11. Hydrogen sorption properties of ball-milled Mg-C nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Spassov, Tony; Zlatanova, Zlatina; Spassova, Maya; Todorova, Stanislava [Faculty of Chemistry, University of Sofia ' ' St.Kl.Ohridski' ' , 1 James Bourchier str. 1164 Sofia (Bulgaria)

    2010-10-15

    MgH{sub 2} 75 at.%-C 25 at.% composites are synthesized by ball milling using different kinds of carbon additives: carbon black (CB), nanodiamonds (ND) and amorphous carbon soot (AC). X-ray diffraction analysis showed that the MgH{sub 2} phase in the as-obtained composite powders is nanocrystalline (80-100 nm). The SEM observations revealed that the samples consist of 5-15 {mu}m MgH{sub 2} particles, surrounded and in some cases coated by carbon flakes. The composite containing nanodiamonds revealed strong decrease of the MgH{sub 2} decomposition temperature with more than 100 C, compared to ball-milled pure MgH{sub 2}. Important issue of the present study is also the low temperature hydriding of the ball-milled Mg-C nanocomposites, investigated by high-pressure DSC. The process starts at about 200 C for all materials studied, but the hydriding mechanism looks different for the composites with different kinds of carbon additives. Whereas for Mg-carbon black it takes place in a relatively narrow temperature range, expressed by a single exothermic peak (200-300 C) for the other two composites the hydriding is a multi-step process, featured by two overlapped exothermic peaks for Mg-nanodiamonds and by two well separated exothermic effects (at about 300 C and 400 C) for Mg-amorphous carbon soot. The observed difference in the hydriding behavior of the Mg-C composites is attributed to the different kind of carbon component, which is supposed to play a catalytic role as well as protects magnesium from oxidation. The incorporation of carbon into the MgH{sub 2} particles results in the formation of high density of defects (dislocations and grain boundaries), which is supposed to be among the most possible reasons for the decreased hydride decomposition temperature. The Mg-C nanocomposites show reproducible hydriding/dehydriding behavior (thermodynamics and kinetics) during multiple cycling. Among the composites in the present study ''Mg-carbon black

  12. Enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers by inhibiting Ta diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xu-Jing; Jiang, Shao-Long; Zhang, Jing-Yan; Liu, Qian-Qian; Liu, Yi-Wei; Zhao, Jian-Cheng [Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China); Wu, Zheng-Long [Analytical and Testing Center, Beijing Normal University, Beijing 100875 (China); Feng, Chun, E-mail: fengchun@ustb.edu.cn [Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China); Li, Ming-Hua [Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China); Yu, Guang-Hua, E-mail: ghyu@mater.ustb.edu.cn [Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China)

    2016-03-01

    Graphical abstract: To reveal the underlying mechanism of Mg influence on the enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers, the X-ray photoelectron spectroscopy analysis have been performed. It is found that a certain amount of Mg interlayer at the CoFeB/MgO interface could prevent the Ta oxidation to some extent due to the oxygen deficit MgO{sub x} (x < 1), and consequently lower the diffusion motivation of Ta from the bottom layer to the CoFeB/MgO interfaces to some extent during the annealing process. The prevention of Ta diffusion realizes the effective hybridization of Fe and O at the CoFeB/MgO interface and maintains interfacial magnetic anisotropy (K{sub CoFeB/MgO}). As a result, the perpendicular magnetic anisotropy at high annealing temperatures was maintained. - Highlights: • High annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers was realized. • X-ray photoelectron spectroscopy analysis has been performed to explore the reasons. • The prevention of Ta diffusion was realized by introducing Mg at the CoFeB/MgO interface. - Abstracts: To reveal the underlying mechanism of Mg influence on the enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers, the X-ray photoelectron spectroscopy analysis has been performed. It is found that a certain amount of Mg interlayer at the CoFeB/MgO interface could prevent the Ta oxidation, and consequently lower the diffusion motivation of Ta from the bottom layer to the CoFeB/MgO interfaces to some extent in the annealing process. The prevention of Ta diffusion realizes the effective hybridization of Fe and O at the CoFeB/MgO interface and maintains interfacial magnetic anisotropy (KCoFeB/MgO). As a result, the perpendicular magnetic anisotropy at high annealing temperatures is maintained.

  13. Reusability enhancement of combustion synthesized MgO/MgAl_2O_4 nanocatalyst in biodiesel production by glow discharge plasma treatment

    International Nuclear Information System (INIS)

    Rahmani Vahid, Behgam; Haghighi, Mohammad; Alaei, Shervin; Toghiani, Javad

    2017-01-01

    Graphical abstract: MgO/MgAl_2O_4 nanocatalyst synthesized by impregnation/combustion methods and treated by plasma. FESEM, XRD, EDX, BET-BJH, TG and FTIR analyses were used to investigate the physicochemical characteristics of the nanocatalysts. The nanocatalysts were used in biodiesel production to evaluate and compare their activity. The obtained results from reactor test showed almost similar conversion (higher than 95%) for both treated and untreated nanocatalysts. However, in reusability performance, the plasma treated sample indicated better stability. - Highlights: • Efficient dispersion of MgO on combustion synthesized MgAl_2O_4 spinel nanocatalyst. • Enhanced effect of plasma treatment on nanocatalyst synthesis and its structure. • Successful production of biodiesel using nanocatalyst that treated with plasma. • Increasing the nanocatalyst reusability in biodiesel production by plasma treatment. - Abstract: In this study, plasma technology was used to prepare the catalysts for biodiesel production. The base of MgO/MgAl_2O_4 particles was prepared by combustion synthesis method to attain suitable porosity for large molecules of triglyceride and then active phase of MgO was dispersed on the samples by impregnation method. The nanocatalysts were characterized by XRD, FESEM, EDX, BET-BJH, FTIR, TGA and Particle size distribution analyses. In order to evaluation the catalytic activity of the samples in biodiesel production, the transesterification reaction was performed under these conditions: reaction temperature = 110 °C, methanol-to-oil molar ratio = 12, catalyst concentration = 3 wt.% and reaction time = 3 h. XRD and FTIR results confirm successful synthesis of MgO/MgAl_2O_4. Meanwhile, XRD and EDX analyses indicated that MgO in modified sample by plasma has suitable size distribution. FESEM and BET-BJH analyses reveal proper morphology in both samples and showed higher surface area and pore size in plasma treated sample. TG analysis showed that

  14. Emission spectra of phosphor MgSO4 doped with Dy and Mn

    International Nuclear Information System (INIS)

    Zhang Chunxiang; Chen Lixin; Tang Qiang; Luo Daling; Qiu Zhiren

    2001-01-01

    Emission spectra of phosphor MgSO 4 doped with Dy and Dy/Mn were measured with an optical multichannel analyzer and a linear heating system whose temperature was controlled by a microcomputer. The emission spectrum bands at 480 nm and 580 nm of phosphor MgSO 4 doped with Dy were observed in the three dimensional (3D) glow curves. Compared with the 3D spectrum of CaSO 4 :Dy and the spectrum bands of MgSO 4 :Dy shows the same wavelengths which resulted from the quantum transitions among the energy levels of Dy 3 '+ ions. The intensities of the glow peaks in both spectrum bands (480 nm and 580 nm) of phosphor MgSO 4 doped with Dy/Mn were dramatically reduced except the 380 degree C glow peak

  15. Electronic structure and optical properties of Al and Mg co-doped GaN

    International Nuclear Information System (INIS)

    Ji Yan-Jun; Du Yu-Jie; Wang Mei-Shan

    2013-01-01

    The electronic structure and optical properties of Al and Mg co-doped GaN are calculated from first principles using density function theory with the plane-wave ultrasoft pseudopotential method. The results show that the optimal form of p-type GaN is obtained with an appropriate Al:Mg co-doping ratio rather than with only Mg doping. Al doping weakens the interaction between Ga and N, resulting in the Ga 4s states moving to a high energy region and the system band gap widening. The optical properties of the co-doped system are calculated and compared with those of undoped GaN. The dielectric function of the co-doped system is anisotropic in the low energy region. The static refractive index and reflectivity increase, and absorption coefficient decreases. This provides the theoretical foundation for the design and application of Al—Mg co-doped GaN photoelectric materials

  16. The Formation of Fe/Mg Smectite Under Mildly Acidic Conditions on Early Mars

    Science.gov (United States)

    Sutter, B.; Golden, D. C.; Ming, Douglas W.; Niles, P. B.

    2011-01-01

    The detection of Fe/Mg smectites and carbonate in Noachian and early Hesperian terrain of Mars suggests that neutral to mildly alkaline conditions prevailed during the early history of Mars. If early Mars surface geochemical conditions were neutral to moderately alkaline with a denser CO2 atmosphere than today, then large carbonates deposits should be more widely detected in Noachian terrain. Why have so few carbonate deposits been detected compared to Fe/Mg smectites? Fe/Mg smectites on early Mars formed under mildly acidic conditions, which would preclude the extensive formation of carbonate deposits. The goal of the proposed work is to evaluate the formation of Fe/Mg smectites under mildly acidic conditions.

  17. New fundamental experimental studies on α-Mg(BH4)2 and other borohydrides

    International Nuclear Information System (INIS)

    Hagemann, Hans; D'Anna, Vincenza; Rapin, Jean-Philippe; Cerny, Radovan; Filinchuk, Yaroslav; Kim, Ki Chul; Sholl, David S.; Parker, Stewart F.

    2011-01-01

    Research highlights: → Eutectic behavior is observed in the LiBH4 -Mg(BH4)2 system. → New INS data show good agreement with theoretical DFT calculations. → Temperature dependent Raman spectra complement previous NMR studies. - Abstract: Several new studies of Mg(BH 4 ) 2 are reported. A 1:1 LiBH 4 :Mg(BH 4 ) 2 mixture was studied by in situ synchrotron X-ray diffraction and reveals an eutectic behavior with the eutectic composition more rich in Mg(BH 4 ) 2 , and the eutectic temperature lower than 456 K. No dual cation compound was observed in this experiment. New vibrational spectra including INS data have been obtained and are compared with theoretical DFT calculations and recent NMR studies, showing good agreement.

  18. New fundamental experimental studies on {alpha}-Mg(BH{sub 4}){sub 2} and other borohydrides

    Energy Technology Data Exchange (ETDEWEB)

    Hagemann, Hans, E-mail: Hans-Rudolf.Hagemann@unige.ch [Dept. de Chim. Phys, Univ. of Geneva (Switzerland); D' Anna, Vincenza [Dept. de Chim. Phys, Univ. of Geneva (Switzerland); Rapin, Jean-Philippe; Cerny, Radovan [Lab. Crystallography, Univ. of Geneva (Switzerland); Filinchuk, Yaroslav [Swiss-Norwegian Beam Lines at ESRF, Grenoble (France); Kim, Ki Chul; Sholl, David S. [School of Chemical and Biomolecular Engineering, Georgia Inst. Technol., Atlanta (United States); Parker, Stewart F. [ISIS Facility, STFC Rutherford Appleton Laboratory, Chilton, Didcot, Oxon OX11 0QX (United Kingdom)

    2011-09-15

    Research highlights: > Eutectic behavior is observed in the LiBH4 -Mg(BH4)2 system. > New INS data show good agreement with theoretical DFT calculations. > Temperature dependent Raman spectra complement previous NMR studies. - Abstract: Several new studies of Mg(BH{sub 4}){sub 2} are reported. A 1:1 LiBH{sub 4}:Mg(BH{sub 4}){sub 2} mixture was studied by in situ synchrotron X-ray diffraction and reveals an eutectic behavior with the eutectic composition more rich in Mg(BH{sub 4}){sub 2}, and the eutectic temperature lower than 456 K. No dual cation compound was observed in this experiment. New vibrational spectra including INS data have been obtained and are compared with theoretical DFT calculations and recent NMR studies, showing good agreement.

  19. Prophylactic single-dose administration of 600 mg clindamycin versus 4-time administration of 600 mg clindamycin in orthognathic surgery: A prospective randomized study in bilateral mandibular sagittal ramus osteotomies

    NARCIS (Netherlands)

    Lindeboom, Jerôme A. H.; Baas, Eric M.; Kroon, Frans H. M.

    2003-01-01

    Objective. The purpose of this study was to compare a single 600-mg dose of preoperative intravenously administered clindamycin with a 24-hour 600-mg regimen of clindamycin as prophylaxis for postoperative infections in bilateral sagittal ramus osteotomies. Study design. Seventy patients were

  20. Ethylbenzene dehydrogenation over Mg3Fe0.5−xCoxAl0.5 catalysts derived from hydrotalcites: Comparison with Mg3Fe0.5−yNiyAl0.5 catalysts

    KAUST Repository

    Atanda, Luqman A.; Balasamy, Rabindran J.; Khurshid, Alam; Al-Ali, Ali A S; Sagata, Kunimasa; Asamoto, Makiko; Yahiro, Hidenori; Nomura, Kiyoshi; Sano, Tsuneji; Takehira, Katsuomi; Al-Khattaf, Sulaiman S.

    2011-01-01

    A series of Mg3Fe0.5-xCoxAl0.5 (x = 0-0.5) catalysts were prepared from hydrotalcite precursors and their activities in the dehydrogenation of ethylbenzene were compared with those of a series of Mg3Fe0.5-yNiyAl0.5 (y = 0-0.5) catalysts also derived

  1. Sexual asthenia: Tradamixina versus Tadalafil 5 mg daily

    Science.gov (United States)

    2012-01-01

    Background Reduced libido is widely considered the most prominent symptomatic reflection of low testosterone (T) levels in men. Testosterone deficiency (TD) afflicts approximately 30% of men aged 40-79 years. This study seeks to evaluate the effect of a new natural compound “tradamixina “in order to improve male sexual function in elderly men, particularly libido and possible erectile dysfunction, versus administration of tadalafil 5 mg daily. Methods Seventy patients (67.3± 3.7 years) with stable marital relations and affected by reduced libido, with or without erectile dysfunction were recruited. They were randomly separated in 2 groups A-B of 35. Group A was administered twice a day a new compound “Tradamixina” (150 mg of Alga Ecklonia Bicyclis, 396 mg of Tribulus Terrestris and 144 mg of D-Glucosamine and N-Acetyl-D-Glucosamine) for two months, while Group B was administered tadalafil 5 mg daily, for two months. At visit and after 60 days of treatment patients were evaluated by means of detailed medical and sexual history, clinical examination, laboratory investigations (Total and Free T), instrumental examination (NPTR- nocturnal penile tumescence and rigidity test- with Rigiscan). Patients completed a self-administered IIEF questionnaire (The international index of erectile function) and SQoLM questionnaire (Sexual quality of life Questionnarie-Male). The results pre and post treatment were compared by Student t test (p<0.005). Results After 2 months of treatment in group A serum TT levels (230±18 ng/dl vs 671±14 ng/dl ) and FT levels(56± 2.4 pg/ml vs 120± 3.9pg/ml) increased, while in group B serum TT levels (245±12 ng/dl vs 247±15 ng/dl ) and FT levels(53± 0.3 pg/ml vs 55± 0.5pg/ml) increased not statistically significant. The patient’s numbers with negative NPTR improved after treatment in group A and B (15 vs 18 and 13 vs 25 respectively). The IIEF total score in group A increased after treatment with tradamixina (15±1.5 vs 29.77±1

  2. Superconductivity of powder-in-tube MgB{sub 2} wires

    Energy Technology Data Exchange (ETDEWEB)

    Glowacki, B A; Evetts, J E [IRC in Superconductivity, University of Cambridge, Madingley Road, Cambridge, CB3 OHE (United Kingdom); Department of Materials Science and Metallurgy, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom); Majoros, M [IRC in Superconductivity, University of Cambridge, Madingley Road, Cambridge, CB3 OHE (United Kingdom); Institute of Electrical Engineering, Slovak Academy of Science, Dubravska Cesta 9, Bratislava (Slovakia); Vickers, M [Department of Materials Science and Metallurgy, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom); Shi, Y [IRC in Superconductivity, University of Cambridge, Madingley Road, Cambridge, CB3 OHE (United Kingdom); McDougall, I [Oxford Instruments Plc, Eynsham, OX8 ITL (United Kingdom)

    2001-04-01

    A new class of 'powder-in-tube' Mg-B superconducting conductors has been prepared using two different methods: an in situ technique where an Mg + 2B mixture was used as a central conductor core and reacted in situ to form MgB{sub 2}, and an ex situ technique where fully reacted MgB{sub 2} powder was used to fill the metal tube. Conductors were prepared using silver, copper and bimetallic silver/stainless steel tubes. Wires manufactured by the in situ technique, diffusing Mg to B particles experienced {approx}25.5% decrease in density from the initial value after cold deformation, due to the phase transformation from Mg + 2({beta}-B){yields}MgB{sub 2} all with hexagonal structure. A comparative study of the intergranular current and grain connectivity in wires was conducted by AC susceptibility measurements and direct four point transport measurements. Using a SQUID magnetometer, magnetization versus magnetic field (M-H) curves of the round wires before and after sintering and reactive diffusion were measured at 5 K and in magnetic fields up to 5 T to define the J{sub cmag}. The direct current measurements were performed in self field at 4.2 K. A comparison between zero-field-cooled (ZFC) and field-cooled (FC) susceptibility measurements for sintered Ag/MgB{sub 2}, and reacted Cu/Mg + 2B conductors revealed systematic differences in the flux pinning in the wires which is in very good agreement with direct high transport current measurements. (author)

  3. Superconductivity of powder-in-tube MgB{sub 2} wires

    Energy Technology Data Exchange (ETDEWEB)

    Glowacki, B.A.; Evetts, J.E. [IRC in Superconductivity, University of Cambridge, Madingley Road, Cambridge, CB3 OHE (United Kingdom); Department of Materials Science and Metallurgy, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom); Majoros, M. [IRC in Superconductivity, University of Cambridge, Madingley Road, Cambridge, CB3 OHE (United Kingdom); Institute of Electrical Engineering, Slovak Academy of Science, Dubravska Cesta 9, Bratislava (Slovakia); Vickers, M. [Department of Materials Science and Metallurgy, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom); Shi, Y. [IRC in Superconductivity, University of Cambridge, Madingley Road, Cambridge, CB3 OHE (United Kingdom); McDougall, I. [Oxford Instruments Plc, Eynsham, OX8 ITL (United Kingdom)

    2001-04-01

    A new class of 'powder-in-tube' Mg-B superconducting conductors has been prepared using two different methods: an in situ technique where an Mg + 2B mixture was used as a central conductor core and reacted in situ to form MgB{sub 2}, and an ex situ technique where fully reacted MgB{sub 2} powder was used to fill the metal tube. Conductors were prepared using silver, copper and bimetallic silver/stainless steel tubes. Wires manufactured by the in situ technique, diffusing Mg to B particles experienced {approx}25.5% decrease in density from the initial value after cold deformation, due to the phase transformation from Mg + 2({beta}-B){yields}MgB{sub 2} all with hexagonal structure. A comparative study of the intergranular current and grain connectivity in wires was conducted by AC susceptibility measurements and direct four point transport measurements. Using a SQUID magnetometer, magnetization versus magnetic field (M-H) curves of the round wires before and after sintering and reactive diffusion were measured at 5 K and in magnetic fields up to 5 T to define the J{sub cmag}. The direct current measurements were performed in self field at 4.2 K. A comparison between zero-field-cooled (ZFC) and field-cooled (FC) susceptibility measurements for sintered Ag/MgB{sub 2}, and reacted Cu/Mg + 2B conductors revealed systematic differences in the flux pinning in the wires which is in very good agreement with direct high transport current measurements. (author)

  4. Phase controlled synthesis of (Mg, Ca, Ba)-ferrite magnetic nanoparticles with high uniformity

    International Nuclear Information System (INIS)

    Wang, S.F.; Li, Q.; Zu, X.T.; Xiang, X.; Liu, W.; Li, S.

    2016-01-01

    (Mg, Ca, Ba)-ferrite magnetic nanoparticles were successfully synthesized through modifying the atomic ratio of polysaccharide and chelating agent at an optimal sintering temperature. In the process, the polysaccharide plays an important role in drastically shrinking the precursor during the gel drying process. In the metal-complex structure, M"2"+ ion active sites were coordinated by −OH of the water molecules except for EDTA anions. The MFe_2O_4 magnetic nanoparticles exhibited enhanced magnetic properties when compared with nano-MFe_2O_4 of similar particle size synthesized by other synthesis route reported in the literature. In particular, the sintering temperature improves the crystallinity and increases the hysteresis loop squareness ratio of (Mg, Ca, Ba)-ferrite nanoparticles significantly. - Graphical abstract: Schematic representation of the proposed model for MFe_2O_4 nanoparticle synthesis, starting from EDTA-chelated M"2"+ (M=Mg, Ca, or Ba) cations (left). High dispersion (Mg, Ca, Ba)-ferrite magnetic nanoparticles were prepared by a modified polyacrylamide gel route. Optimized utilization of polysaccharide, chelating agent, and sintering temperature allowed the formation of (Mg, Ca, Ba)-ferrite nanoparticles with a narrow diameter distribution. - Highlights: • We report a modified polyacrylamide gel route to synthesize (Mg, Ca, Ba)-ferrite magnetic nanoparticles. • Chelate mechanism of metal ions (Mg, Ca, Ba) and EDTA has been discussed. • Phase transformation process of (Mg, Ca, Ba)-ferrites has been discussed. • The preparation method increases the hysteresis loop squareness ratio of (Mg, Ca, Ba)-ferrite nanoparticles.

  5. Phase controlled synthesis of (Mg, Ca, Ba)-ferrite magnetic nanoparticles with high uniformity

    Energy Technology Data Exchange (ETDEWEB)

    Wang, S.F., E-mail: wangshifa2006@yeah.net [School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054, Sichuan (China); Science and technology on vacuum technology and physics laboratory, Lanzhou Institute of Physics, Lanzhou 730000, Gansu (China); Li, Q. [School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054, Sichuan (China); Zu, X.T., E-mail: xtzu@uestc.edu.cn [Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, Sichuan (China); Xiang, X.; Liu, W. [School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054, Sichuan (China); Li, S., E-mail: sean.li@unsw.edu.au [School of Material Science and Engineering, University of New South Wales, Sydney 2052 (Australia)

    2016-12-01

    (Mg, Ca, Ba)-ferrite magnetic nanoparticles were successfully synthesized through modifying the atomic ratio of polysaccharide and chelating agent at an optimal sintering temperature. In the process, the polysaccharide plays an important role in drastically shrinking the precursor during the gel drying process. In the metal-complex structure, M{sup 2+} ion active sites were coordinated by −OH of the water molecules except for EDTA anions. The MFe{sub 2}O{sub 4} magnetic nanoparticles exhibited enhanced magnetic properties when compared with nano-MFe{sub 2}O{sub 4} of similar particle size synthesized by other synthesis route reported in the literature. In particular, the sintering temperature improves the crystallinity and increases the hysteresis loop squareness ratio of (Mg, Ca, Ba)-ferrite nanoparticles significantly. - Graphical abstract: Schematic representation of the proposed model for MFe{sub 2}O{sub 4} nanoparticle synthesis, starting from EDTA-chelated M{sup 2+} (M=Mg, Ca, or Ba) cations (left). High dispersion (Mg, Ca, Ba)-ferrite magnetic nanoparticles were prepared by a modified polyacrylamide gel route. Optimized utilization of polysaccharide, chelating agent, and sintering temperature allowed the formation of (Mg, Ca, Ba)-ferrite nanoparticles with a narrow diameter distribution. - Highlights: • We report a modified polyacrylamide gel route to synthesize (Mg, Ca, Ba)-ferrite magnetic nanoparticles. • Chelate mechanism of metal ions (Mg, Ca, Ba) and EDTA has been discussed. • Phase transformation process of (Mg, Ca, Ba)-ferrites has been discussed. • The preparation method increases the hysteresis loop squareness ratio of (Mg, Ca, Ba)-ferrite nanoparticles.

  6. Microstructure and mechanical properties of an Al–Mg alloy solidified under high pressures

    International Nuclear Information System (INIS)

    Jie, J.C.; Zou, C.M.; Brosh, E.; Wang, H.W.; Wei, Z.J.; Li, T.J.

    2013-01-01

    Highlights: •Al–42.2Mg alloy was solidified under pressures of 1, 2, and 3 GPa and the microstructure analyzed. •A thermodynamic calculation of the Al–Mg phase diagram at high pressures was performed. •The phase content changes from predominantly γ-Al 12 Mg 17 at 1 GPa to FCC solid solution at 3 GPa. •The β-Al 3 Mg 2 is predicted to remain stable at low temperatures but is not observed. •The alloy solidified at high pressure has remarkably enhanced ultimate tensile strength. -- Abstract: Phase formation, the microstructure and its evolution, and the mechanical properties of an Al–42.2 at.% Mg alloy solidified under high pressures were investigated. After solidification at pressures of 1 GPa and 2 GPa, the main phase is the γ phase, richer in Al than in equilibrium condition. When the pressure is further increased to 3 GPa, the main phase is the supersaturated Al(Mg) solid solution with Mg solubility up to 41.6 at.%. Unlike in similar alloys solidified at ambient pressure, the β phase does not appear. Calculated high-pressure phase diagrams of the Al–Mg system show that although the stability range of the β phase is diminished with pressure, it is still thermodynamically stable at room temperature. Hence, the disappearance of the β phase is interpreted as kinetic suppression, due to the slow diffusion rate at high pressures, which inhibits solid–solid reactions. The Al–42.2 at.% Mg alloy solidified under 3 GPa has remarkably enhanced ultimate tensile strength compared to the alloy solidified under normal atmospheric pressure

  7. Comparative Genomics

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 11; Issue 8. Comparative Genomics - A Powerful New Tool in Biology. Anand K Bachhawat. General Article Volume 11 Issue 8 August 2006 pp 22-40. Fulltext. Click here to view fulltext PDF. Permanent link:

  8. Comparative Advantage

    DEFF Research Database (Denmark)

    Zhang, Jie; Jensen, Camilla

    2007-01-01

    that are typically explained from the supply-side variables, the comparative advantage of the exporting countries. A simple model is proposed and tested. The results render strong support for the relevance of supply-side factors such as natural endowments, technology, and infrastructure in explaining international...

  9. Comparative perspectives

    African Journals Online (AJOL)

    IT

    Ideology, policy and implementation: Comparative perspectives from two ... how both political as well as particular language ideologies play a major role in influencing and ..... attitudes as a field of research, many scholars still draw on the concept of .... The data for this study were collected through the use of questionnaires ...

  10. Why did the FDA approve efavirenz 800 mg when co-administered with rifampin?

    Science.gov (United States)

    Liu, Jiang; Chan-Tack, Kirk M; Jadhav, Pravin; Seo, Shirley; Robertson, Sarah M; Kraft, Jeffrey; Singer, Mary E; Struble, Kimberly A; Arya, Vikram

    2014-06-01

    Literature reports regarding the efficacy of efavirenz (EFV) 600 mg with rifampin (RIF) are not consistent. Evaluation of a drug-drug interaction (DDI) study and supportive semi-mechanistic population pharmacokinetic (PK) analyses were undertaken to help delineate this issue. DDI study and supportive semi-mechanistic population PK analyses were provided by BMS. Population PK analysis was based on six studies with intensive EFV PK sampling. An ACTG study with sparse PK sampling was used for model evaluation. Simulations compared EFV exposure at various doses in combination with RIF to EFV exposures at 600 mg once daily (QD). Effects of CYP2B6 genotypes on the magnitude of EFV-RIF interaction were also explored. In DDI study, co-administering EFV 600 mg QD and RIF reduced mean EFV exposure by ~ 30%. Population PK model provided acceptable predictive performance of central tendency and variability for EFV C0, Cmax, and AUC. Simulations predicted that increasing EFV to 800 mg QD with RIF would result in EFV AUC and Cmax similar to EFV 600 mg QD alone. EFV AUC and Cmax were ~ 2 times higher in subjects with reduced function CYP2B6 genotypes. However, the RIF effect was consistent across all genotypes. EFV dose adjustment to 800 mg QD did not increase the risk of overexposure compared to 600 mg EFV QD within each genotype. Dose adjustment based on matching systemic exposure was recommended to mitigate the potential for sub-therapeutic EFV exposures. Our review did not reveal any safety concerns in subjects receiving EFV 800 mg QD with RIF.

  11. Anisotropic Mg Electrodeposition and Alloying with Ag-based Anodes from Non-Coordinating Mixed-Metal Borohydride Electrolytes for Mg Hybrid Batteries

    International Nuclear Information System (INIS)

    Wetzel, David J.; Malone, Marvin A.; Gewirth, Andrew A.; Nuzzo, Ralph G.

    2017-01-01

    A highly anisotropic electrodeposition was observed using the hybrid battery electrolyte Mg(BH 4 ) 2 with LiBH 4 in diglyme. At low overpotentials high aspect ratio platelet morphologies are observed with a strong fiber texture composed of a {10-10} and a {11-20} component, the first evidence of behavior of this kind in magnesium battery electrolytes. At high overpotentials the deposit aspect ratio is indistinguishable but the texture is shown to be primarily composed of a {11-20} fiber texture. The kinetic parameters relative to the relevant crystallographic faces are extracted from electron microscopy images and compared with the observed bulk rate extracted from the electrochemical data. The use of polycrystalline Ag foil substrates with little preferred orientation at the surface allowed highly polycrystalline nucleation at lower overpotentials than that of platinum, likely due to Ag alloying with Mg. Characterization using focused ion beam (FIB) cross-sections with Auger Electron Spectroscopy (AES) elemental analysis confirm that the deposits are primarily Mg although Mg‐Ag alloys of various compositions were observed. It is proposed that the orientation at slow rates of growth is due to the underlying kinetics of adatom diffusion on Mg and that higher rates diminish the phenomenon due to decreased time for adatom diffusion and instead are governed by the rates of adatom formation or more specifically the adatom vacancy formation on the different low-index planes of Mg.

  12. Enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers by inhibiting Ta diffusion

    International Nuclear Information System (INIS)

    Li, Xu-Jing; Jiang, Shao-Long; Zhang, Jing-Yan; Liu, Qian-Qian; Liu, Yi-Wei; Zhao, Jian-Cheng; Wu, Zheng-Long; Feng, Chun; Li, Ming-Hua; Yu, Guang-Hua

    2016-01-01

    Graphical abstract: To reveal the underlying mechanism of Mg influence on the enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers, the X-ray photoelectron spectroscopy analysis have been performed. It is found that a certain amount of Mg interlayer at the CoFeB/MgO interface could prevent the Ta oxidation to some extent due to the oxygen deficit MgO_x (x < 1), and consequently lower the diffusion motivation of Ta from the bottom layer to the CoFeB/MgO interfaces to some extent during the annealing process. The prevention of Ta diffusion realizes the effective hybridization of Fe and O at the CoFeB/MgO interface and maintains interfacial magnetic anisotropy (K_C_o_F_e_B_/_M_g_O). As a result, the perpendicular magnetic anisotropy at high annealing temperatures was maintained. - Highlights: • High annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers was realized. • X-ray photoelectron spectroscopy analysis has been performed to explore the reasons. • The prevention of Ta diffusion was realized by introducing Mg at the CoFeB/MgO interface. - Abstracts: To reveal the underlying mechanism of Mg influence on the enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers, the X-ray photoelectron spectroscopy analysis has been performed. It is found that a certain amount of Mg interlayer at the CoFeB/MgO interface could prevent the Ta oxidation, and consequently lower the diffusion motivation of Ta from the bottom layer to the CoFeB/MgO interfaces to some extent in the annealing process. The prevention of Ta diffusion realizes the effective hybridization of Fe and O at the CoFeB/MgO interface and maintains interfacial magnetic anisotropy (KCoFeB/MgO). As a result, the perpendicular magnetic anisotropy at high annealing temperatures is maintained

  13. Enhanced superconducting properties of MgB2 by carbon substitution using carbon containing nano additives

    International Nuclear Information System (INIS)

    Devadas, K.M.; Varghese, Neson; Vinod, K.; Rahul, S.; Thomas, Syju; Anooja, J.B.; Syamaprasad, U.; Sundaresan, A.; Roy, S.B.

    2010-01-01

    A comparative study on the effect of doping of nano carbon, nano diamond and nano SiC in MgB 2 is carried out. The J c (H) is significantly enhanced for all doped samples compared to the pure sample among which MgB 1.9 C 0.1 (nano C) exhibits the best J c (H) performance. The enhanced performance is due to the effective substitution of C at B site which is confirmed by the systematic decrease in both α axis and T c . (author)

  14. Controllable synthesis of carbon nanotubes by changing the Mo content in bimetallic Fe-Mo/MgO catalyst

    International Nuclear Information System (INIS)

    Xu Xiangju; Huang Shaoming; Yang Zhi; Zou Chao; Jiang Junfan; Shang Zhijie

    2011-01-01

    Research highlights: → Increasing the Mo content in the Fe-Mo/MgO catalysts resulted in an increase in wall number, diameter and growth yield of carbon nanotubes. → The Fe interacts with MgO to form complex (MgO) x (FeO) 1-x (0 4 and relative large metal Mo particles can be generated after reduction. → The avalanche-like reduction of MgMoO 4 makes the catalyst particles to be small thus enhances the utilize efficiency of Fe nanoparticles. - Abstract: A series of Fe-Mo/MgO catalysts with different Mo content were prepared by combustion method and used as catalysts for carbon nanotube (CNT) growth. Transmission electron microscopy studies of the nanotubes show that the number of the CNT walls and the CNT diameters increase with the increasing of Mo content in the bimetallic catalyst. The growth yield determined by thermogravimetric analysis also follows the trend: the higher the Mo content, the higher the yield of the CNTs. However, the increase of Mo content leads to the lower degree of graphitization of CNTs. A comparative study on the morphology and catalytic functions of Fe/MgO, Mo/MgO and Fe-Mo/MgO catalysts was carried out by scanning electron microscopy and X-ray diffraction. It is found that the Fe interacts with MgO to form complexes and is then dispersed into the MgO support uniformly, resulting in very small Fe nanoparticles after reduction. The Mo interacts with MgO to form stoichiometry compound MgMoO 4 and relative large metal Mo particles can be generated after reduction. High yield CNTs with small diameter can be generated from Fe-Mo/MgO because the avalanche-like reduction of MgMoO 4 makes the catalyst particles to be small thus enhances the utilize efficiency of Fe nanoparticles.

  15. Structural and optical properties of ZnMgO nanostructures formed by Mg in-diffused ZnO nanowires

    International Nuclear Information System (INIS)

    Pan, C.-J.; Hsu, H.-C.; Cheng, H.-M.; Wu, C.-Y.; Hsieh, W.-F.

    2007-01-01

    ZnMgO nanostructures with wurtzite phase were prepared by thermal diffusion of Mg into the ZnO nanowires. As ZnO light-emitting devices have been operated by using ZnMgO layers as energy barrier layers to confine the carriers, it is essential to realize the characterization of ZnMgO particularly. In this work, the Mg content in Zn 1 -x Mg x O alloy determined by X-ray diffraction (XRD) and photoluminescence (PL) shows a good coincidence. The variation of lattice constant and the blueshift of near-band-edge emission indicate that Zn 2+ ions are successfully substituted by Mg 2+ ions in the ZnO lattice. In Raman-scattering studies, the change of E 2 (high) phonon line shape in ZnO:Mg nanostructures reveals the microscopic substitutional disorder. In addition to the host phonons of ZnO, two additional bands around 383 and 510 cm -1 are presumably attributed to the Mg-related vibrational modes. - Graphical abstract: We reported the synthesis of the ZnMgO nanostructures prepared by a simple vapor transport method. Magnesium-related anomalous modes are observed by Raman spectra for the first time in ZnMgO system

  16. From $^{27}$Mg to ${33}$Mg transition to the "Island of inversion"

    CERN Document Server

    Yordanov, Deyan

    Since introduced in nuclear physics, the concept of shell structure and magic numbers has governed our understanding of nuclear matter in atomic nuclei close to stability. Nuclear species with a magic number of protons and/or neutrons are known to be more stable and close to spherical in shape. Experimental studies of 30Ne, 31Na and 32Mg, systems with a closed neutron sd shell (N=20), provide evidence for a ground-state deformation in these nuclei. The observed phenomenon is understood as an inversion of the normal spherical ground-state configuration, expected according to the traditional shell model, with deformed states governed by particle-hole excitations over the N=20 shell gap. The properties of nuclei in this Island of inversion are of particular importance for the theoretical modeling of the region. The present doctoral dissertation reports on the first determination of the nuclear ground-state spins and magnetic moments of 31,33Mg, obtained by means of laser spectroscopy in combination with nuclear...

  17. Mg concentration profile and its control in the low temperature grown Mg-doped GaN epilayer

    Science.gov (United States)

    Liu, S. T.; Yang, J.; Zhao, D. G.; Jiang, D. S.; Liang, F.; Chen, P.; Zhu, J. J.; Liu, Z. S.; Liu, W.; Xing, Y.; Zhang, L. Q.; Wang, W. J.; Li, M.; Zhang, Y. T.; Du, G. T.

    2018-01-01

    In this work, the Cp2Mg flux and growth pressure influence to Mg doping concentration and depth profiles is studied. From the SIMS measurement we found that a transition layer exists at the bottom region of the layer in which the Mg doping concentration changes gradually. The thickness of transition layer decreases with the increases of Mg doping concentration. Through analysis, we found that this is caused by Ga memory effect which the Ga atoms stay residual in MOCVD system will react with Mg source, leading a transition layer formation and improve the growth rate. And the Ga memory effect can be well suppressed by increasing Mg doping concentration and growth pressure and thus get a steep Mg doping at the bottom region of p type layer.

  18. Comparison of the efficacy and safety of rosuvastatin 10 mg and atorvastatin 20 mg in high-risk patients with hypercholesterolemia – Prospective study to evaluate the Use of Low doses of the Statins Atorvastatin and Rosuvastatin (PULSAR

    Directory of Open Access Journals (Sweden)

    García Hugo

    2006-12-01

    Full Text Available Abstract Background Many patients at high risk of cardiovascular disease do not achieve recommended low-density lipoprotein cholesterol (LDL-C goals. This study compared the efficacy and safety of low doses of rosuvastatin (10 mg and atorvastatin (20 mg in high-risk patients with hypercholesterolemia. Methods A total of 996 patients with hypercholesterolemia (LDL-C ≥ 3.4 and Results Rosuvastatin 10 mg reduced LDL-C levels significantly more than atorvastatin 20 mg at week 6 (44.6% vs. 42.7%, p Conclusion In high-risk patients with hypercholesterolemia, rosuvastatin 10 mg was more efficacious than atorvastatin 20 mg at reducing LDL-C, enabling LDL-C goal achievement and improving other lipid parameters. Both treatments were well tolerated.

  19. Industrial production of MgH2 and its application

    International Nuclear Information System (INIS)

    Uesugi, H.; Sugiyama, T.; Nii, H.; Ito, T.; Nakatsugawa, I.

    2011-01-01

    Research highlights: → Tablet and powder Mg were hydrogenated in a 50 kg batch furnace based on thermal equilibrium method. → Compression of Mg tablet improved the hydrogenation yield. → Hydrolysis of MgH 2 using citric acid generated hydrogen under 373 K. → A MgH 2 -hydrogen reactor utilizing hydraulic head pressure was developed. → - Abstract: A process for the industrial production of magnesium hydride (MgH 2 ) based on a thermal equilibrium method and its application to portable hydrogen sources is proposed. Mg powders and tablets compressed with mechanically ground Mg ribbons were successfully hydrogenated in a 50-kg-batch furnace. The resultant MgH 2 showed a hydrogen yield of around 96% with good reproducibility. The compression ratio of Mg tablets was found to be an important factor in the hydrogenation yield. A hydrolysis technique using citric acid as an additive was employed to generate hydrogen under 373 K. Increasing the concentration of citric acid and the temperature accelerated the hydrolysis reactivity. A hydrogen reactor utilizing hydraulic head pressure was developed. It generated hydrogen continuously for 1 h at a flow rate of 100 ml min -1 with hydrolysis of 5 g of tablet-form MgH 2 . The conversion yield was around 70%, regardless of the flow rate.

  20. Low-energy radioactive ion beam production of 22Mg

    International Nuclear Information System (INIS)

    Duy, N.N.; Kubono, S.; Yamaguchi, H.; Kahl, D.; Wakabayashi, Y.; Teranishi, T.; Iwasa, N.; Kwon, Y.K.; Khiem, L.H.; Kim, Y.H.; Song, J.S.; Hu, J.; Ayyad, Y.

    2013-01-01

    The 22 Mg nucleus plays an important role in nuclear astrophysics, specially in the 22 Mg(α,p) 25 Al and proton capture 22 Mg(p,γ) 23 Al reactions. It is believed that 22 Mg is a waiting point in the αp-process of nucleosynthesis in novae. We proposed a direct measurement of the 22 Mg+α resonance reaction in inverse kinematics using a radioactive ion (RI) beam. A 22 Mg beam of 3.73 MeV/u was produced at CRIB (Center for Nuclear Study (CNS) low-energy RI Beam) facility of the University of Tokyo located at RIKEN (Japan) in 2011. In this paper we present the results about the production of the 22 Mg beam used for the direct measurement of the scattering reaction 22 Mg(α,α) 22 Mg, and the stellar reaction 22 Mg(α,p) 25 Al in the energy region concerning an astrophysical temperature of T 9 =1–3 GK

  1. Improving magnetic properties of MgB{sub 2} bulk superconductors by synthetic engine oil treatment

    Energy Technology Data Exchange (ETDEWEB)

    Taylan Koparan, E., E-mail: etaylan20@gmail.com [Department of Science Education, Eregli Faculty of Education, Bulent Ecevit University, TR-67300, Zonguldak (Turkey); Savaskan, B. [Energy Systems Engineering, Faculty of Technology, Karadeniz Technical University, 61830, Of, Trabzon (Turkey); Yanmaz, E. [Department of Mechatronics, Faculty of Engineering and Architecture, İstanbul Gelişim University, İstanbul (Turkey)

    2016-08-15

    Highlights: • The effects of synthetic engine oil treatment on magnetic properties of bulk MgB{sub 2} superconductors has been first time investigated and reported. • Synthetic engine oil used as a product which is cheap and a rich carbon source obviously has improved the superconducting magnetic properties of MgB{sub 2}. • The critical current density of all of MgB{sub 2} samples immersed at different standby time in engine oil in whole field range has been better than that of the pure MgB{sub 2} sample. • The MgB{sub 2} sample immersed at 300 min standby time in synthetic engine oil has the best performance compared to other samples. - Abstract: The present study focuses on the effects of standby time of the MgB{sub 2} samples immersed in synthetic engine oil on the critical current density ( J{sub c}(H)), magnetic field dependence of the pinning force density f{sub p}(b) and T{sub c} performances of MgB{sub 2} bulk superconductors. Synthetic engine oil was used as a product which is cheap and a rich carbon source. Manufactured MgB{sub 2} pellet samples were immersed at different standby time of 30 min, 120 min, 300 min and 1440 min in synthetic engine oil after the first heating process. Finally, MgB{sub 2} samples immersed in synthetic engine oil were sintered at 1000 °C and kept for 15 min in Ar atmosphere. The critical current density of all of MgB{sub 2} samples immersed at different standby time in engine oil in whole field range was better than that of the pure MgB{sub 2} sample because of the number of the pinning centers. The MgB{sub 2} sample immersed at 300 min standby time in synthetic engine oil has the best performance compared to other samples. The J{sub c} value for the pure sample is 2.0 × 10{sup 3} A/cm{sup 2}, whereas for the MgB{sub 2} sample immersed at 300 min standby time in engine oil the J{sub c} is enhanced to 4.8 × 10{sup 3} A/cm{sup 2} at 5 K and 3 T. The superconducting transition temperature (T{sub c}) did not change

  2. Improving magnetic properties of MgB_2 bulk superconductors by synthetic engine oil treatment

    International Nuclear Information System (INIS)

    Taylan Koparan, E.; Savaskan, B.; Yanmaz, E.

    2016-01-01

    Highlights: • The effects of synthetic engine oil treatment on magnetic properties of bulk MgB_2 superconductors has been first time investigated and reported. • Synthetic engine oil used as a product which is cheap and a rich carbon source obviously has improved the superconducting magnetic properties of MgB_2. • The critical current density of all of MgB_2 samples immersed at different standby time in engine oil in whole field range has been better than that of the pure MgB_2 sample. • The MgB_2 sample immersed at 300 min standby time in synthetic engine oil has the best performance compared to other samples. - Abstract: The present study focuses on the effects of standby time of the MgB_2 samples immersed in synthetic engine oil on the critical current density ( J_c(H)), magnetic field dependence of the pinning force density f_p(b) and T_c performances of MgB_2 bulk superconductors. Synthetic engine oil was used as a product which is cheap and a rich carbon source. Manufactured MgB_2 pellet samples were immersed at different standby time of 30 min, 120 min, 300 min and 1440 min in synthetic engine oil after the first heating process. Finally, MgB_2 samples immersed in synthetic engine oil were sintered at 1000 °C and kept for 15 min in Ar atmosphere. The critical current density of all of MgB_2 samples immersed at different standby time in engine oil in whole field range was better than that of the pure MgB_2 sample because of the number of the pinning centers. The MgB_2 sample immersed at 300 min standby time in synthetic engine oil has the best performance compared to other samples. The J_c value for the pure sample is 2.0 × 10"3 A/cm"2, whereas for the MgB_2 sample immersed at 300 min standby time in engine oil the J_c is enhanced to 4.8 × 10"3 A/cm"2 at 5 K and 3 T. The superconducting transition temperature (T_c) did not change with the increasing standby time of the samples in synthetic engine oil at all. The best diamagnetic property was

  3. The structural, electrical and optical properties of Mg-doped ZnO with different interstitial Mg concentration

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Yonghong, E-mail: hchyh@njust.edu.cn [School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100 (China); Institute of Optoelectronics & Nanomaterials, College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China); Zeng, Haibo [Institute of Optoelectronics & Nanomaterials, College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China); Du, Jifu [School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100 (China); Hu, Ziyu [Beijing Computational Science Research Center, Beijing 100084 (China); Zhang, Shengli [Institute of Optoelectronics & Nanomaterials, College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China)

    2016-10-01

    Through first principle calculations, we studied the structural, electronic and optical properties of ZnO doped by interstitial Mg. With the increase of Mg content (x), the derivations of lattice parameters from the wurtzite ZnO become more and more significant. The Mg-doped ZnO with x below 15.79% is found to be n-type semiconductor. The minimum of energy band gap and light transmittance in high energy region (7.5–25 eV) decrease while the conductivity and refractive index increase with increasing x. Further increasing x up to 20%, the Mg-doped ZnO is found to be direct-band-gap semiconductor with great structural derivation from wurtzite phase. The light transmittance increases while the refractive index decreases with the increase of x due to the change of geometry and electronic structure. So, it’s concluded that the electronic and optical properties of ZnO doped by interstitial Mg may be greatly influenced by Mg content. - Graphical abstract: The minimum of energy gap decreases while the corresponding relative number of electrons into the conduction bands increases when the interstitial Mg content x in Mg-doped ZnO increases (0 ≤ x ≤ 15.79%). - Highlights: • The energy band gap decreases with the increase of interstitial Mg content from 5.88% to 15.79%. • The conductivity increases with the increase of interstitial Mg content from 5.88% to 15.79%. • The Mg{sub x}Zn{sub 1-x}O (interstitial Mg content x= 20%) is found to be a direct-band-gap semiconductor. • The light transmittance decreases with the increase of interstitial Mg content from 5.88% to 15.79%. • The refractive index increases with the increase of interstitial Mg content from 5.88% to 15.79%.

  4. Tracing alteration of mantle peridotite in the Samail ophiolite using Mg isotopes

    Science.gov (United States)

    de Obeso, J. C.; Kelemen, P. B.; Higgins, J. A.

    2017-12-01

    Magnesium is one of the main constituents of mantle peridotite ( 22.8 wt%), which has a homogeneous Mg isotopic composition (d26Mg = -0.25 ± 0.04 ‰ (2 sd) DSM3, Teng et al 2010 GCA). Mg isotopes are used as tracers of continental and oceanic weathering as they exhibit variable degrees of fractionation during alteration depending on the lithology. Here we report some of the first Mg isotopic compositions of the mantle section of the Samail ophiolite in Oman and its alteration products. The mantle section of the ophiolite is composed mainly of depleted harzburgites and dunites with mantle-like d26Mg (-0.25, -0.21 ‰). Mantle peridotite is far from equilibrium in near surface conditions leading to rapid, extensive serpentinization, carbonation and oxidation, as well as other geochemical changes. Our analyzed samples encompass most of the alteration of peridotite products observed in Oman including listvenites (completely carbonated peridotite) near the basal thrust of the ophiolite, massive magnesite veins within peridotite outcrops, and heavily altered harzburgites. Magnesite listvenites have d26Mg slightly below mantle values (-0.33, -0.33‰) while dolomite listvenites are significantly lighter (-1.46, -0.89‰). This suggests that heavy Mg isotopes were removed from the listvenites during ophiolite emplacement. Heavily altered peridotite from Wadi Fins exhibit alteration halos with drastic changes in composition. The most oxidized areas are enriched in Fe and depleted in Mg compared to the cores of the samples. These variations in Mg concentrations are complemented by a shift to heavy Mg isotopic compositions (0.74, 0.86‰), among the heaviest d26Mg values that have been reported in altered peridotite. Potential sinks for light isotopes removed from such alteration zones are massive magnesite veins with very light compositions (-3.39, -3.14‰). The fractionation of Mg isotopes observed in the mantle section of the ophiolite spans more than 50% of the known

  5. Catalytic removal of sulfur dioxide from dibenzothiophene sulfone over Mg-Al mixed oxides supported on mesoporous silica.

    Science.gov (United States)

    You, Nansuk; Kim, Min Ji; Jeong, Kwang-Eun; Jeong, Soon-Yong; Park, Young-Kwon; Jeon, Jong-Ki

    2010-05-01

    Dibenzothiophene sulfone (DBTS), one of the products of the oxidative desulfurization of heavy oil, can be removed through extraction as well as by an adsorption process. It is necessary to utilize DBTS in conjunction with catalytic cracking. An object of the present study is to provide an Mg-Al-mesoporous silica catalyst for the removal of sulfur dioxide from DBTS. The characteristics of the Mg-Al-mesoporous silica catalyst were investigated through N2 adsorption, XRD, ICP, and XRF. An Mg-Al-mesoporous silica catalyst formulated in a direct incorporation method showed higher catalytic performance compared to pure MgO during the catalytic removal of sulfur dioxide from DBTS. The higher dispersion of Mg as well as the large surface area of the Mg-Al-mesoporous silica catalyst strongly influenced the catalyst basicity in DBTS cracking.

  6. Analysis of dosimetric peaks of MgB4O7:Dy (40% Teflon versus LiF:Mg,Ti TL detectors

    Directory of Open Access Journals (Sweden)

    Paluch-Ferszt Monika

    2016-03-01

    Full Text Available Magnesium tetraborate doped with dysprosium (MgB4O7:Dy is known as a good thermoluminophor for personal dosimetry of gamma ray and X-ray radiation because of its high sensitivity and close tissue equivalence. This material can be produced by different routes. The sintered pastilles of magnesium tetraborate mixed with Teflon (40% used in this work were manufactured at the Federal University of Sergipe, Department of Physics by the solid-state synthesis. Magnesium tetraborate was already used for high-dose dosimetry, exhibiting linearity for a wide range of doses. In this work, the authors examined its main characteristics prior to potential use of detectors in everyday dosimetry, comparing this material to a widely used LiF:Mg,Ti phosphor. The following tests influencing dosimetric peaks of MgB4O7:Dy were presented: (1 the shape of the glow curves, (2 annealing conditions and post-irradiation annealing and its influence for background of the detectors, (3 the choice of the heating rates at the read-out and (4 the threshold dose, that is, the lowest possible dose to be measured. Similar tests were performed with LiF:Mg,Ti detectors, produced and widely used in Poland. The results were compared and discussed.

  7. Corrosion properties of the Mg alloy coated with polypyrrole films

    International Nuclear Information System (INIS)

    Grubač, Zoran; Rončević, Ivana Škugor; Metikoš-Huković, Mirjana

    2016-01-01

    Highlights: • Electropolymerization of pyrrole on Mg-alloy surface in presence of salicylate. • Salicylate dual role in PPy deposition: passivation and electron transfer mediation. • Redox potential of salicylate corresponds to potential of PPy nucleation. • EIS and polarization corrosion studies of PPy coated Mg-alloy in Hanks’ solution. • Polypyrrole significantly slowdown Mg alloy corrosion in Hanks’ solution. - Abstract: In the present study the reactive surface of Mg alloy was coated with the nontoxic biocompatible polypyrrole (PPy) film synthesized by electrochemical oxidation from an aqueous salicylate solution. Salicylate ions prevent Mg dissolution and act as an electron transfer mediator during the PPy film nucleation, formation and growth on the alloy surface. Kinetics of the pyrrole polymerization as well as corrosion resistance of the PPy coated Mg alloy in the Hanks’ solution were investigated using dc electrochemical methods and electrochemical impedance spectroscopy (EIS). Characterization of the surface film was performed by optical and Fourier transform infrared spectroscopy (FTIR).

  8. Thermoelectric properties and microstructure of Mg3Sb2

    International Nuclear Information System (INIS)

    Condron, Cathie L.; Kauzlarich, Susan M.; Gascoin, Franck; Snyder, G. Jeffrey

    2006-01-01

    Mg 3 Sb 2 has been prepared by direct reaction of the elements. Powder X-ray diffraction, thermal gravimetric, differential scanning calorimetery, and microprobe data were obtained on hot pressed samples. Single phase samples of Mg 3 Sb 2 were prepared and found to contain oxygen at the grain boundaries and to lose Mg and oxidize at temperatures above 900 K. Thermoelectric properties were characterized by Seebeck, electrical resistivity, and thermal conductivity measurements from 300 to 1023 K, and the maximum zT was found to be 0.21 at ∼875 K. - Graphical abstract: Dimensionless figure of merit for Mg 3 Sb 2 hot pressed and sintered at 873 K. The inset illustrates the crystal structure of Mg 3 Sb 2 along the [100] direction (white=Mg, black=Sb)

  9. Theoretical study on the gas adsorption capacity and selectivity of CPM-200-In/Mg and CPM-200-In/Mg-X (-X = -NH2, -OH, -N, -F).

    Science.gov (United States)

    Liu, Xiao-le; Chen, Guang-Hui; Wang, Xiu-Jun; Li, Peng; Song, Yi-Bing; Li, Rui-Yan

    2017-11-15

    The adsorption capacities of a heterometallic metal-organic framework (CPM-200-In/Mg) to VOCs (HCHO, C 2 H 4 , CH 4 , C 2 H 2 , C 3 H 8 , C 2 H 6 , C 2 H 3 Cl, C 2 H 2 Cl 2 , CH 2 Cl 2 and CHCl 3 ) and some inorganic gas molecules (HCN, SO 2 , NO, CO 2 , CO, H 2 S and NH 3 ), as well as its selectivity in ternary mixture systems of natural gas and post-combustion flue gas are theoretically explored at the grand canonical Monte Carlo (GCMC) and density functional theory (DFT) levels. It is shown that CPM-200-In/Mg is suitable for the adsorption of VOCs, particularly for HCHO (up to 0.39 g g -1 at 298 K and 1 bar), and the adsorption capacities of some inorganic gas molecules such as SO 2 , H 2 S and CO 2 match well with the sequence of their polarizability (SO 2 > H 2 S > CO 2 ). The large adsorption capacities of HCN and HCHO in the framework result from the strong interaction between adsorbates and metal centers, based on analyzing the radial distribution functions (RDF). Comparing C 2 H 4 and CH 4 molecules interacting with CPM-200-In/Mg by VDW interaction, we speculate that the high adsorption capacities of their chlorine derivatives in the framework could be due to the existence of halogen bonding or strong electrostatic and VDW interactions. It is found that the basic groups, including -NH 2 , -N and -OH, can effectively improve both the adsorption capacities and selectivity of CPM-200-In/Mg for harmful gases. Note that the adsorption capacity of CPM-200-In/Mg-NH 2 (site 2) (245 cm 3 g -1 ) for CO 2 exceeded that of MOF-74-Mg (228 cm 3 g -1 ) at 273 K and 1 bar and that for HCHO can reach 0.41 g g -1 , which is almost twice that of 438-MOF and nearly 45 times of that in active carbon. Moreover, for natural gas mixtures, the decarburization and desulfurization abilities of CPM-200-In/Mg-NH 2 (site 2) have exceeded those of the MOF-74 series, while for post-combustion flue gas mixtures, the desulfurization ability of CPM-200-In/Mg-NH 2 (site 2) is still

  10. A high resolution atlas of Mg II profiles

    Science.gov (United States)

    Ewald, R.; Nichols-Bohlin, Joy Y.; Kondo, Yoji

    1990-01-01

    An atlas of high dispersion Mg II profiles for standard stars of spectral types B0 through G9 is presented. The atlas contains plots of the Mg II profiles for approximately 65 stars and associated equivalent width measurements for both absorption and emission components, and the subordinate lines. The atlas is used to investigate systematic behavior of the Mg II profiles and correlation of the behavior with spectral classification.

  11. MgO nanoparticles as antibacterial agent: preparation and activity

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Zhen-Xing, E-mail: tangzhenxing@126.com [Department of Food Science, Anqing, Vocational and Technical College, Anqing, Anhui (China); Lv, Bin-Feng [Date Palm Research Center, King Faisal University, (Saudi Arabia)

    2014-07-15

    Bacterial pollution is a great risk for human health. Nanotechnology offers a way to develop new inorganic antibacterial agents. Nano-inorganic metal oxide has a potential to reduce bacterial contamination. MgO is an important inorganic oxide and has been widely used in many fields. Many studies have shown that MgO nanoparticles have good antibacterial activity. Therefore, in this paper, the main synthesis methods, antibacterial activity and antibacterial mechanisms of MgO nanoparticles are reviewed. (author)

  12. MgO nanoparticles as antibacterial agent: preparation and activity

    International Nuclear Information System (INIS)

    Tang, Zhen-Xing; Lv, Bin-Feng

    2014-01-01

    Bacterial pollution is a great risk for human health. Nanotechnology offers a way to develop new inorganic antibacterial agents. Nano-inorganic metal oxide has a potential to reduce bacterial contamination. MgO is an important inorganic oxide and has been widely used in many fields. Many studies have shown that MgO nanoparticles have good antibacterial activity. Therefore, in this paper, the main synthesis methods, antibacterial activity and antibacterial mechanisms of MgO nanoparticles are reviewed. (author)

  13. Effect of amorphous Mg50Ni50 on hydriding and dehydriding behavior of Mg2Ni alloy

    International Nuclear Information System (INIS)

    Guzman, D.; Ordonez, S.; Fernandez, J.F.; Sanchez, C.; Serafini, D.; Rojas, P.A.; Aguilar, C.; Tapia, P.

    2011-01-01

    Composite Mg 2 Ni (25 wt.%) amorphous Mg 50 Ni 50 was prepared by mechanical milling starting with nanocrystalline Mg 2 Ni and amorphous Mg 50 Ni 50 powders, by using a SPEX 8000 D mill. The morphological and microstructural characterization of the powders was performed via scanning electron microscopy and X-ray diffraction. The hydriding characterization of the composite was performed via a solid gas reaction method in a Sievert's-type apparatus at 363 K under an initial hydrogen pressure of 2 MPa. The dehydriding behavior was studied by differential thermogravimetry. On the basis of the results, it is possible to conclude that amorphous Mg 50 Ni 50 improved the hydriding and dehydriding kinetics of Mg 2 Ni alloy upon cycling. A tentative rationalization of experimental observations is proposed. - Research Highlights: → First study of the hydriding behavior of composite Mg 2 Ni (25 wt.%) amorphous Mg 50 Ni 50 . → Microstructural characterization of composite material using XRD and SEM was obtained. → An improved effect of Mg 50 Ni 50 on the Mg 2 Ni hydriding behavior was verified. → The apparent activation energy for the hydrogen desorption of composite was obtained.

  14. Lattice stability and formation energies of intrinsic defects in Mg2Si and Mg2Ge via first principles simulations

    International Nuclear Information System (INIS)

    Jund, Philippe; Viennois, Romain; Tédenac, Jean-Claude; Colinet, Catherine; Hug, Gilles; Fèvre, Mathieu

    2013-01-01

    We report an ab initio study of the semiconducting Mg 2 X (with X = Si, Ge) compounds and in particular we analyze the formation energies of the different point defects with the aim of understanding the intrinsic doping mechanisms. We find that the formation energy of Mg 2 Ge is 50% larger than that of Mg 2 Si, in agreement with the experimental tendency. From a study of the stability and the electronic properties of the most stable defects, taking into account the growth conditions, we show that the main cause of the n doping in these materials comes from interstitial magnesium defects. Conversely, since other defects acting like acceptors such as Mg vacancies or multivacancies are more stable in Mg 2 Ge than in Mg 2 Si, this explains why Mg 2 Ge can be of n or p type, in contrast to Mg 2 Si. The finding that the most stable defects are different in Mg 2 Si and Mg 2 Ge and depend on the growth conditions is important and must be taken into account in the search for the optimal doping to improve the thermoelectric properties of these materials.

  15. Hydrodechlorination of Tetrachloromethane over Palladium Catalysts Supported on Mixed MgF2-MgO Carriers

    Directory of Open Access Journals (Sweden)

    Magdalena Bonarowska

    2016-11-01

    Full Text Available Pd/MgO, Pd/MgF2 and Pd/MgO-MgF2 catalysts were investigated in the reaction of CCl4 hydrodechlorination. All the catalysts deactivated in time on stream, but the degree of deactivation varied from catalyst to catalyst. The MgF2-supported palladium with relatively large metal particles appeared the best catalyst, characterized by good activity and selectivity to C2-C5 hydrocarbons. Investigation of post-reaction catalyst samples allowed to find several details associated with the working state of hydrodechlorination catalysts. The role of support acidity was quite complex. On the one hand, a definite, although not very high Lewis acidity of MgF2 is beneficial for shaping high activity of palladium catalysts. The MgO-MgF2 support characterized by stronger Lewis acidity than MgF2 contributes to very good catalytic activity for a relatively long reaction period (~5 h but subsequent neutralization of stronger acid centers (by coking eliminates them from the catalyst. On the other hand, the role of acidity evolution, which takes place when basic supports (like MgO are chlorided during HdCl reactions, is difficult to assess because different events associated with distribution of chlorided support species, leading to partial or even full blocking of the surface of palladium, which plays the role of active component in HdCl reactions.

  16. Preparation and Properties of Mg-Cu-Y-Al bulk Amorphous Alloys

    DEFF Research Database (Denmark)

    Pryds, Nini; Eldrup, Morten Mostgaard; Ohnuma, M.

    2000-01-01

    Bulk amorphous (Mg(1-gamma)Al(gamma))(60)CU(30)Y(10) alloys were prepared using a relatively simple technique of rapid cooling of the melt in a copper wedge mould. The temperature vs, time was recorded during the cooling and solidification process of the melt and compared with a spacial and tempo......Bulk amorphous (Mg(1-gamma)Al(gamma))(60)CU(30)Y(10) alloys were prepared using a relatively simple technique of rapid cooling of the melt in a copper wedge mould. The temperature vs, time was recorded during the cooling and solidification process of the melt and compared with a spacial...... temperatures in specimens containing a few percent Al. The alloy with no Al crystallises apparently without the formation of nanoparticles. The critical cooling rate for the formation of an amorphous Mg(60)CU(30)Y(10) specimen was determined experimentally by a combination of DSC data and temperature vs, time...

  17. Corrosion behaviour of powder metallurgical and cast Al-Zn-Mg base alloys

    International Nuclear Information System (INIS)

    Sameljuk, A.V.; Neikov, O.D.; Krajnikov, A.V.; Milman, Yu.V.; Thompson, G.E.

    2004-01-01

    The behaviour of Al-Zn-Mg base alloys produced by powder metallurgy and casting has been studied using potentiodynamic polarisation in 0.3% and 3% NaCl solutions. The influence of alloy production route on microstructure has been examined by scanning electron microscopy, Auger electron spectroscopy and secondary ion mass spectrometry. An improvement in performance of powder metallurgy (PM) materials, compared with the cast alloy, was evident in solutions of low chloride concentration; less striking differences were revealed in high chloride concentration. Both powder metallurgy and cast alloys show two main types of precipitates, which were identified as Zn-Mg and Zr-Sc base intermetallic phases. The microstructure of the PM alloys is refined compared with the cast material, which assists understanding of the corrosion performance. The corrosion process commences with dissolution of the Zn-Mg base phases, with the relatively coarse phases present in the cast alloy showing ready development of corrosion

  18. Bimodal microstructure and deformation of cryomilled bulk nanocrystalline Al-7.5Mg alloy

    International Nuclear Information System (INIS)

    Lee, Z.; Witkin, D.B.; Radmilovic, V.; Lavernia, E.J.; Nutt, S.R.

    2005-01-01

    The microstructure, mechanical properties and deformation response of bimodal structured nanocrystalline Al-7.5Mg alloy were investigated. Grain refinement was achieved by cryomilling of atomized Al-7.5Mg powders, and then cryomilled nanocrystalline powders blended with 15 and 30% unmilled coarse-grained powders were consolidated by hot isostatic pressing followed by extrusion to produce bulk nanocrystalline alloys. Bimodal bulk nanocrystalline Al-7.5Mg alloys, which were comprised of nanocrystalline grains separated by coarse-grain regions, show balanced mechanical properties of enhanced yield and ultimate strength and reasonable ductility and toughness compared to comparable conventional alloys and nanocrystalline metals. The investigation of tensile and hardness test suggests unusual deformation mechanisms and interactions between ductile coarse-grain bands and nanocrystalline regions

  19. Effect of sterilization process on surface characteristics and biocompatibility of pure Mg and MgCa alloys

    International Nuclear Information System (INIS)

    Liu, X.L.; Zhou, W.R.; Wu, Y.H.; Cheng, Y.; Zheng, Y.F.

    2013-01-01

    The aim of this work was to investigate the effect of various sterilization methods on surface characteristics and biocompatibility of MgCa alloy, with pure Mg as a comparison, including steam autoclave sterilization (SA), ethylene oxide steam sterilization (EO), glutaraldehyde sterilization (GD), dry heat sterilization (DH) and Co60 γ ray radiation sterilization (R) technologies. The surface characterizations were performed by environmental scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, grazing incidence X-ray diffraction, water contact angle and surface free energy measurement, whereas the cytotoxicity and hemocompatibility were evaluated by cellular adhesive experiment, platelet adhesion and hemolysis test. The results showed that the five sterilization processes caused more changes on the surface of MgCa alloy than that on the surface of pure Mg. The GD sterilization caused the most obvious changes on the surface of the pure Mg, and the SA sterilization made the largest alteration on the MgCa alloy surface. The GD and DH sterilization processes could cause increases on surface free energy for both pure Mg and MgCa alloys, while the other three sterilization processes reduced the surface free energy. The DH and GD sterilization processes caused the least alteration on the cell adhesion on pure Mg surface, whereas the EO sterilization performed the greatest impact on the cell adhesion on the Mg–Ca alloy surface. The hemolysis percentage of pure Mg and MgCa alloys were reduced by SA sterilization, meanwhile the other four sterilization processes increased their hemolysis percentages significantly, especially for the EO sterilization. - Highlights: • The effect of sterilization on surface chemistry and biocompatibility was studied. • Sterilization caused more surface changes on MgCa alloy than pure Mg. • Co60 γ ray radiation is the most appropriate sterilization process

  20. Video Comparator

    International Nuclear Information System (INIS)

    Rose, R.P.

    1978-01-01

    The Video Comparator is a comparative gage that uses electronic images from two sources, a standard and an unknown. Two matched video cameras are used to obtain the electronic images. The video signals are mixed and displayed on a single video receiver (CRT). The video system is manufactured by ITP of Chatsworth, CA and is a Tele-Microscope II, Model 148. One of the cameras is mounted on a toolmaker's microscope stand and produces a 250X image of a cast. The other camera is mounted on a stand and produces an image of a 250X template. The two video images are mixed in a control box provided by ITP and displayed on a CRT. The template or the cast can be moved to align the desired features. Vertical reference lines are provided on the CRT, and a feature on the cast can be aligned with a line on the CRT screen. The stage containing the casts can be moved using a Boeckleler micrometer equipped with a digital readout, and a second feature aligned with the reference line and the distance moved obtained from the digital display

  1. Defect structure of ultrafine MgB2 nanoparticles

    International Nuclear Information System (INIS)

    Bateni, Ali; Somer, Mehmet; Repp, Sergej; Erdem, Emre; Thomann, Ralf; Acar, Selçuk

    2014-01-01

    Defect structure of MgB 2 bulk and ultrafine particles, synthesized by solid state reaction route, have been investigated mainly by the aid of X-band electron paramagnetic resonance spectrometer. Two different amorphous Boron (B) precursors were used for the synthesis of MgB 2 , namely, boron 95 (purity 95%–97%, <1.5 μm) and nanoboron (purity >98.5%, <250 nm), which revealed bulk and nanosized MgB 2 , respectively. Scanning and transmission electron microscopy analysis demonstrate uniform and ultrafine morphology for nanosized MgB 2 in comparison with bulk MgB 2 . Powder X-ray diffraction data show that the concentration of the by-product MgO is significantly reduced when nanoboron is employed as precursor. It is observed that a significant average particle size reduction for MgB 2 can be achieved only by using B particles of micron or nano size. The origin and the role of defect centers were also investigated and the results proved that at nanoscale MgB 2 material contains Mg vacancies. Such vacancies influence the connectivity and the conductivity properties which are crucial for the superconductivity applications

  2. Effect of Electrolyte Composition on Corrosion Behavior of PEO Treated AZ91 Mg Alloy

    International Nuclear Information System (INIS)

    Park, Kyeong Jin; Lee, Jae Ho

    2009-01-01

    Mg and Mg alloys have been used for lots of applications, including automobile industry, aerospace, mobile phone and computer parts owing to low density. However, Mg and Mg alloys have a restricted application because of poor corrosion properties. Thus, improved surface treatments are required to produce protective films that protect the substrate from corrosion environments. Environmental friendly Plasma Electrolytic Oxidation (PEO) has been widely investigated on magnesium alloys. PEO process combines electrochemical oxidation with plasma treatment in the aqueous solution. In this study, AZ91 Mg alloys were treated by PEO process in controlling the current with PC condition and treated time, concentration of NaF, NaOH, and Na 2 SiO 3 . The surface morphology and phase composition were analyzed using SEM, EDS and XRD. The potentiodynamic polarization tests were carried out for the analysis of corrosion properties of specimen. Additionally, salt spray tests were carried out to examine and compare the corrosion properties of the PEO treated Mg alloys

  3. Interface Promoted Reversible Mg Insertion in Nanostructured Tin-Antimony Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Yingwen; Shao, Yuyan; Parent, Lucas R.; Sushko, Maria L.; Li, Guosheng; Sushko, Petr; Browning, Nigel D.; Wang, Chong M.; Liu, Jun

    2015-11-11

    This paper demonstrates intermetallic compounds SnSb are highly active materials for reversibly hosting Mg ions. Compared with monometallic Sn and Sb, SnSb alloy exhibited exceptionally high reversible capacity (420 mAh/g), excellent rate capability and good cyclic stability. Mg insertion into pristine SnSb involves an activation process to complete, which induces particle breakdown and results in phase segregation to Sn-rich and Sb-rich phases. Both experimental analysis and DFT simulation suggest that the Sn-rich phase is particularly active and provides most of the capacity whereas the Sb-rich phase is not as active, and the interface between these two phases play a key role in promoting the formation and stabilization of the cubic Sn phase that is more favorable for fast and reversible Mg insertion. We further show that activated SnSb alloy has good compatibility with simple Mg electrolytes. Overall, this work could provide new approaches for designing materials capable of reversible Mg ion insertion and new opportunities for understanding Mg electrochemistry.

  4. Studies on Al-Mg solid solutions using electrical resistivity and microhardness measurements

    Energy Technology Data Exchange (ETDEWEB)

    Gaber, A.; Afify, N.; El-Halawany, S.M.; Mossad, A. [Assiut Univ. (Egypt). Dept. of Physics

    1999-08-01

    Al-C at% Mg alloys (C = 0.82, 1.84, 3.76, 5.74 and 12.18) have been selected for this study. From the electrical resistivity measurements it is concluded that the resistivity increment of Al-Mg alloys (in a solid solution state) is proportional to the atomic fractional constituents (Mg and Al) as {delta}{rho}{sub all} = 64.66 c(1-c) {mu}{omega} cm. In addition, both the temperature coefficient of resistivity, {alpha}{sub all} and the relaxation time of the free electrons {tau}{sub all} in the alloys diminish with increasing the solute Mg concentration. The increase of the scattering power, {eta}, with increasing C is interpreted to be due to the contribution of electron-impurity scattering. The percentage increase due to electron-impurity scattering per one atomic percent Mg has been determined as 12.99%. The Debye temperature {theta} decreases as the Mg concentration increases. The microhardness results showed that the solid solution hardening obeys the relation {delta}HV{sub s} = 135.5C{sup 0.778} MPa which is comparable to the theory of solid solution hardening for all alloys; {delta}HV{sub s} {approx} C{sup 0.5-0.67} MPa. (orig.)

  5. Microstructural evolution during hydrogen sorption cycling of Mg-FeTi nanolayered composites

    Energy Technology Data Exchange (ETDEWEB)

    Kalisvaart, W.P., E-mail: pkalisvaart@gmail.com [Chemical and Materials Engineering, University of Alberta and National Research Council Canada, National Institute for Nanotechnology, Edmonton, AB, T6G 2V4 (Canada); Kubis, Alan; Danaie, Mohsen; Amirkhiz, Babak Shalchi [Chemical and Materials Engineering, University of Alberta and National Research Council Canada, National Institute for Nanotechnology, Edmonton, AB, T6G 2V4 (Canada); Mitlin, David, E-mail: dmitlin@ualberta.ca [Chemical and Materials Engineering, University of Alberta and National Research Council Canada, National Institute for Nanotechnology, Edmonton, AB, T6G 2V4 (Canada)

    2011-03-15

    This paper describes the microstructural evolution of Mg-FeTi mutlilayered hydrogen storage materials during extended cycling. A 28 nm Mg-5 nm FeTi multilayer has comparable performance to a cosputtered material with an equivalent composition (Mg-10%Fe-10%Ti), which is included as a baseline case. At 200 deg. C, the FeTi layers act as a barrier, preventing agglomeration of Mg particles. At 300 deg. C, the initial structure of the multilayer is preserved up to 35 cycles, followed by fracturing of the Mg layers in the in-plane direction and progressive delamination of the FeTi layers as observed by electron microscopy. Concurrently, an increase in the Mg grain size was observed from 32 to 76 nm between cycles 35 and 300. As a result, the absorption kinetics deteriorate with cycling, although 90% of the total capacity is still absorbed within 2 min after as many as 300 cycles. The desorption kinetics, on the other hand, remain rapid and stable, and complete desorption of 4.6 wt.% H is achieved in 1.5 min at ambient desorption pressure. In addition to showing good hydrogen storage performance, multilayers are an excellent model system for studying the relation between microstructure and hydrogen absorption/desorption kinetics.

  6. Microstructural evolution during hydrogen sorption cycling of Mg-FeTi nanolayered composites

    International Nuclear Information System (INIS)

    Kalisvaart, W.P.; Kubis, Alan; Danaie, Mohsen; Amirkhiz, Babak Shalchi; Mitlin, David

    2011-01-01

    This paper describes the microstructural evolution of Mg-FeTi mutlilayered hydrogen storage materials during extended cycling. A 28 nm Mg-5 nm FeTi multilayer has comparable performance to a cosputtered material with an equivalent composition (Mg-10%Fe-10%Ti), which is included as a baseline case. At 200 deg. C, the FeTi layers act as a barrier, preventing agglomeration of Mg particles. At 300 deg. C, the initial structure of the multilayer is preserved up to 35 cycles, followed by fracturing of the Mg layers in the in-plane direction and progressive delamination of the FeTi layers as observed by electron microscopy. Concurrently, an increase in the Mg grain size was observed from 32 to 76 nm between cycles 35 and 300. As a result, the absorption kinetics deteriorate with cycling, although 90% of the total capacity is still absorbed within 2 min after as many as 300 cycles. The desorption kinetics, on the other hand, remain rapid and stable, and complete desorption of 4.6 wt.% H is achieved in 1.5 min at ambient desorption pressure. In addition to showing good hydrogen storage performance, multilayers are an excellent model system for studying the relation between microstructure and hydrogen absorption/desorption kinetics.

  7. Casting defects and mechanical properties of high pressure die cast Mg-Zn-Al-RE alloys

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Wenlong; Easton, Mark A.; Zhu, Suming; Nie, Jianfeng [CAST Cooperative Research Centre, Department of Materials Engineering Monash University, Melbourne, VIC (Australia); Dargusch, Matthew S. [School of Mechanical and Mining Engineering, University of Queensland, Brisbane, QLD (Australia); Gibson, Mark A. [CSIRO Process Science and Engineering, Melbourne, VIC (Australia); Jia, Shusheng [Key Laboratory of Automobile Materials, Ministry of Education, Department of Materials Science and Engineering Jilin University, Changchun (China)

    2012-02-15

    The die casting defects and tensile properties of high pressure die cast (HPDC) Mg-Zn-Al-RE alloys with various combinations of Zn and Al were studied. The results show that die casting defects in Mg-Zn-Al-RE alloys are affected by the percentage of Zn and Al contents. The hot tearing susceptibility (HTS) of Mg-Zn-Al-RE alloys tends to increase with increasing Zn content up to 6 wt%, while a further increase of Al and/or Zn content reduces the HTS. In tensile tests, the yield strength (YS) is generally improved by increasing Zn or Al content, whereas the tensile strength (TS) and ductility appear to depend largely on the presence of casting defects. Compared with Mg-Zn-Al alloys, the mechanical properties of the Mg-Zn-Al-RE alloy are significantly improved. The Mg-4Zn-4Al-4RE alloy is found to have few casting defects and the optimal tensile properties. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  8. Stabilization of arsenic and lead by magnesium oxide (MgO) in different seawater concentrations.

    Science.gov (United States)

    Kameda, Kentaro; Hashimoto, Yohey; Ok, Yong Sik

    2018-02-01

    Ongoing sea level rise will have a major impact on mobility and migration of contaminants by changing a number of natural phenomena that alter geochemistry and hydrology of subsurface environment. In-situ immobilization techniques may be a promising remediation strategy for mitigating contaminant mobility induced by sea level rise. This study investigated the reaction mechanisms of magnesium oxide (MgO) with aqueous Pb and As under freshwater and seawater using XAFS spectroscopy. Initial concentrations of Pb and As in freshwater strongly controlled the characteristics of the reaction product of MgO. Our study revealed that i) the removal of aqueous Pb and As by MgO was increased by the elevation of seawater concentration, and ii) the removal of As was attributed primarily to (inner-sphere) surface adsorption on MgO, independent on seawater concentrations, and iii) the retention mechanism of Pb was dependent on seawater concentrations where formations of Pb oxides and adsorption on the MgO surfa