WorldWideScience

Sample records for mg butorphanol group

  1. Butorphanol Injection

    Science.gov (United States)

    ... Butorphanol is in a class of medications called opioid agonist-antagonists. It works by changing the way ... suddenly stop using butorphanol injection, you may experience withdrawal symptoms such as nervousness, agitation, shakiness, diarrhea, chills, ...

  2. Pharmacokinetics of butorphanol after intravenous, intramuscular, and oral administration in Hispaniolan Amazon parrots (Amazona ventralis).

    Science.gov (United States)

    Guzman, David Sanchez-Migallon; Flammer, Keven; Paul-Murphy, Joanne R; Barker, Steven A; Tully, Thomas N

    2011-09-01

    Previous studies have validated the clinical use of opioids with kaap-receptor affinities for pain management in birds. Butorphanol, a kappa opioid receptor agonist and a mu opioid receptor antagonist, is currently considered by many clinicians to be the opioid of choice for this use. However, despite studies reporting the analgesic properties of butorphanol in psittacine birds, dosing intervals have not been established for any psittacine species. The goals of this study in the Hispaniolan Amazon parrot (Amazona ventralis) were to evaluate the pharmacokinetics of butorphanol tartrate after intravenous (IV), intramuscular (IM), and oral (PO) administration and to determine the bioavailability of butorphanol tartrate after oral administration. Twelve Hispaniolan Amazon parrots were used in the study, with a complete-crossover experimental design and a 3-month period separating each part of the study. The birds were randomly assigned to 3 groups (n = 4) for each stage. Butorphanol tartrate was administered once at a dose of 5 mg/kg in the basilic vein or pectoral muscles or as an oral solution delivered via feeding tube into the crop for the IV, IM, and PO studies, respectively. After butorphanol administration, blood samples were collected at 1, 5, 15, 30, 60, 90, 120, 180, and 240 minutes for the IV and IM studies and at 5, 15, 30, 60, 90, 120, 180, 240, and 300 minutes for the PO study. Because of the size limitation of the birds, naive pooling of datum points was used to generate a mean plasma butorphanol concentration at each time point. For each study, birds in each group (n = 4) were bled 3 times after dosing. Plasma butorphanol concentrations were determined by high-performance liquid chromatography/tandem mass spectrometry, and pharmacokinetic parameters were calculated. Butorphanol tartrate was found to have high bioavailability and rapid elimination following IM administration. In contrast, oral administration resulted in low bioavailability (Amazon

  3. The sedative and analgesic effects of detomidine-butorphanol and detomidine alone in donkeys

    Directory of Open Access Journals (Sweden)

    K.E. Joubert

    1999-07-01

    Full Text Available Butorphanol and detomidine constitute an effective combination for sedation and analgesia in horses. This trial was undertaken to assess the effectiveness of this combination in donkeys. The detomidine and butorphanol were given intravenously one after the other. A dose of 10 mg/kg of detomidine and 25 mg/kg of butorphanol was used. Sedation is easily extended by additional doses of butorphanol. The average dose of detomidine was 11.24 mg/kg and that of butorphanol was 28.0 mg/kg. Four donkeys in the detomidine group required additional sedation and analgesia. Detomidine alone did not totally eliminate coronary band pain. Heart rates dropped significantly in the first minute after the injection of the combination. One donkey developed an atrioventricular block, while another developed a sino-atrial block. Four donkeys developed a Cheyne-Stokes respiratory pattern. The combination of detomidine and butorphanol is an effective combination for sedation and analgesia of donkeys for standing procedures.

  4. Preliminary study of the effects of xylazine or detomidine with or without butorphanol for standing sedation in dairy cattle.

    Science.gov (United States)

    Lin, Hui Chu; Riddell, M Gatz

    2003-01-01

    The sedative effect induced by administering xylazine hydrochloride or detomidine hydrochloride with or without butorphanol tartrate to standing dairy cattle was compared in two groups of six adult, healthy Holstein cows. One group received xylazine (0.02 mg/kg i.v.) followed by xylazine (0.02 mg/kg) and butorphanol (0.05 mg/kg i.v.) 1 week later. Cows in Group B received detomidine (0.01 mg/kg i.v.) followed by detomidine (0.01 mg/kg i.v.) and butorphanol (0.05 mg/kg i.v.) 1 week later. Heart rate, respiratory rate, and arterial blood pressure were monitored and recorded before drugs were administered and every 10 minutes for 1 hour after drug administration. The degree of sedation was evaluated and graded. Cows in each treatment group had significant decreases in heart rate and respiratory rate after test drugs were given. Durations of sedation were 49.0 +/- 12.7 minutes (xylazine), 36.0 +/- 14.1 (xylazine with butorphanol), 47.0 +/- 8.1 minutes (detomidine), and 43.0 +/- 14.0 minutes (detomidine with butorphanol). Ptosis and salivation were observed in cows of all groups following drug administration. Slow horizontal nystagmus was observed from three cows following administration of detomidine and butorphanol. All cows remained standing while sedated. The degree of sedation seemed to be most profound in cows receiving detomidine and least profound in cows receiving xylazine.

  5. Bier′s block using lignocaine and butorphanol

    Directory of Open Access Journals (Sweden)

    Abhishek Bansal

    2011-01-01

    Full Text Available Background : Opioids are most commonly used as adjuncts in intravenous regional anesthesia (IVRA to improve the quality of intraoperative and postoperative analgesia. There is paucity of literature on the use of butorphanol in IVRA. Aims : The aim of this study was to evaluate the likely benefits of addition of butorphanol to lignocaine in Bier′s block in terms of onset and duration of sensory block and also for analgesic requirement in postoperative period. Settings and Design : A randomized double blind study was conducted at Tertiary Care Educational Institute. Patients and Methods : A total of 40 adult ASA I or II patients scheduled to undergo upper limb surgery were randomized in two groups (n=20. Group I received 3 mg/kg of lignocaine alone and group II received 1 mg butorphanol in addition to 3 mg/kg lignocaine. Sensory block onset time and time to recovery from sensory block after tourniquet deflation were noted using the pin prick method. Duration of postoperative analgesia was noted using a visual analogue scale. All the patients were compared for the time to first rescue analgesic consumption and total analgesic consumption in first 24 hours postoperatively. Statistical Analysis Used : The statistical analysis was done using unpaired Student′s t-test. Results : Our study showed significant prolongation of postoperative analgesia in group II as noted by the time to first analgesic requirement. Total analgesic consumption in first 24 hours postoperatively was less in group II. Sensory block onset time and time to recovery from sensory block after tourniquet deflation, did not show any significant difference between the two groups. Conclusions : Addition of butorphanol to lignocaine in IVRA significantly prolongs the duration of postoperative analgesia and 24 hours analgesic consumption is less in patients receiving butorphanol along with lignocaine in IVRA. However, there is no effect on sensory block onset time and time to recovery

  6. Effect of butorphanol on thermal nociceptive threshold in healthy pony foals.

    Science.gov (United States)

    McGowan, K T; Elfenbein, J R; Robertson, S A; Sanchez, L C

    2013-07-01

    Pain management is an important component of foal nursing care, and no objective data currently exist regarding the analgesic efficacy of opioids in foals. To evaluate the somatic antinociceptive effects of 2 commonly used doses of intravenous (i.v.) butorphanol in healthy foals. Our hypothesis was that thermal nociceptive threshold would increase following i.v. butorphanol in a dose-dependent manner in both neonatal and older pony foals. Seven healthy neonatal pony foals (age 1-2 weeks), and 11 healthy older pony foals (age 4-8 weeks). Five foals were used during both age periods. Treatments, which included saline (0.5 ml), butorphanol (0.05 mg/kg bwt) and butorphanol (0.1 mg/kg bwt), were administered i.v. in a randomised crossover design with at least 2 days between treatments. Response variables included thermal nociceptive threshold, skin temperature and behaviour score. Data within each age period were analysed using a 2-way repeated measures ANOVA, followed by a Holm-Sidak multiple comparison procedure if warranted. There was a significant (P<0.05) increase in thermal threshold, relative to Time 0, following butorphanol (0.1 mg/kg bwt) administration in both age groups. No significant time or treatment effects were apparent for skin temperature. Significant time, but not treatment, effects were evident for behaviour score in both age groups. Butorphanol (0.1 mg/kg bwt, but not 0.05 mg/kg bwt) significantly increased thermal nociceptive threshold in neonatal and older foals without apparent adverse behavioural effects. Butorphanol shows analgesic potential in foals for management of somatic painful conditions. © 2012 EVJ Ltd.

  7. Comparative evaluation of midazolam and butorphanol as oral premedication in pediatric patients

    Directory of Open Access Journals (Sweden)

    Chandni Sinha

    2012-01-01

    Full Text Available Background: To compare oral midazolam (0.5 mg/kg with oral butorphanol (0.2 mg/kg as a premedication in 60 pediatric patients with regards to sedation, anxiolysis, rescue analgesic requirement, and recovery profile. Materials and Methods: In a double blinded study design, 60 pediatric patients belonging to ASA class I and II between the age group of 2-12 years scheduled for elective surgery were randomized to receive either oral midazolam (group I or oral butorphanol (group II 30 min before induction of anesthesia. The children were evaluated for levels of sedation and anxiety at the time of separation from the parents, venepuncture, and at the time of facemask application for induction of anesthesia. Rescue analgesic requirement, postoperative recovery, and complications were also recorded. Results: Butorphanol had better sedation potential than oral midazolam with comparable anxiolysis at the time of separation of children from their parents. Midazolam proved to be a better anxiolytic during venepuncture and facemask application. Butorphanol reduced need for supplemental analgesics perioperatively without an increase in side effects such as nausea, vomiting, or unpleasant postoperative recovery. Conclusion: Oral butorphanol is a better premedication than midazolam in children in view of its excellent sedative and analgesic properties. It does not increase side effects significantly.

  8. Cardiovascular, respiratory and sedative effects of intramuscular alfaxalone, butorphanol and dexmedetomidine compared with ketamine, butorphanol and dexmedetomidine in healthy cats.

    Science.gov (United States)

    Cremer, Jeannette; Riccó, Carolina H

    2017-11-01

    Objectives The aim of the study was to evaluate the cardiorespiratory effects, quality of sedation and recovery of intramuscular alfaxalone-dexmedetomidine-butorphanol (ADB) and ketamine-dexmedetomidine-butorphanol (KDB), in cats. Methods Nine adult, healthy cats (6.63 ± 1.42 kg) were enrolled in a blinded, randomized, crossover experimental design. Cats were sedated twice intramuscularly, once with ADB (alfaxalone 1 mg/kg, dexmedetomidine 0.005 mg/kg, butorphanol 0.2 mg/kg), and once with KDB (ketamine 5 mg/kg, dexmedetomidine 0.005 mg/kg, butorphanol 0.2 mg/kg), in random order. Data collected included heart rate (HR), arterial blood pressure and blood gas analysis, respiratory rate, and sedation score. Analysis of variance with Bonferroni post-hoc correction was used for parametric data, and a Wilcoxon signed rank test was used for non-parametric data. Significance was set at P <0.05. Results Total sedation time was shorter for ADB (90.71 ± 15.12 mins vs 147.00 ± 47.75 mins). Peak sedation was observed within 15 mins in both groups. Quality of recovery was excellent in both groups. HR decreased over time in both groups. Diastolic and mean arterial pressure decreased over time for ADB, becoming significant after 30 mins. All cardiovascular variables were within the clinically acceptable range in both groups. Arterial partial pressure of oxygen was significantly decreased from baseline for KDB at all time points (73 ± 2.5 mmHg [9.7 ± 0.3 kPa] vs ADB 83 ± 2.6 mmHg [11 ± 0.3 kPa]). Hypoventilation was not observed. Conclusions and relevance Both protocols produced acceptable cardiovascular stability. Sedation and recovery quality were good, albeit sedation was shorter with ADB. Although oxygenation was better maintained in the ADB group, all sedated cats should receive oxygen supplementation.

  9. The sedative and analgesic effects of detomidine-butorphanol and detomidine alone in donkeys

    OpenAIRE

    K.E. Joubert; P. Briggs; D. Gerber; R.G. Gottschalk

    1999-01-01

    Butorphanol and detomidine constitute an effective combination for sedation and analgesia in horses. This trial was undertaken to assess the effectiveness of this combination in donkeys. The detomidine and butorphanol were given intravenously one after the other. A dose of 10 mg/kg of detomidine and 25 mg/kg of butorphanol was used. Sedation is easily extended by additional doses of butorphanol. The average dose of detomidine was 11.24 mg/kg and that of butorphanol was 28.0 mg/kg. Four donkey...

  10. Butorphanol pre-treatment prevents myoclonus induced by etomidate: a randomised, double-blind, controlled clinical trial.

    Science.gov (United States)

    He, Liang; Ding, Ying; Chen, Huiyu; Qian, Yanning; Li, Zhong

    2014-01-01

    Myoclonic movements are common problems during induction of anaesthesia with etomidate. The myoclonus occurring after etomidate administration may represent a form of seizure. Agonistic modulation of the κ opiate receptor may reduce seizures, and butorphanol acts in such a manner. The aim of this randomised, double-blind, placebo-controlled clinical trial was to test our hypothesis that pre-treatment with butorphanol might reduce the incidence and severity of myoclonus induced by etomidate. Patients (108) with American Society of Anaesthesiologists physical status I or II were randomly assigned to one of two groups to receive either 0.015 mg/kg of butorphanol (n = 54) or saline (n = 54) intravenously. At two minutes after infusion of butorphanol or saline, 0.3 mg/kg etomidate was given. The occurrence and severity (observational score of 0-3) of myoclonus was assessed during 2 minutes after administration of etomidate. For each patient, blood pressure (BP), saturation of peripheral oxygen (SpO₂), and heart rate (HR) were measured. The incidence of myoclonus was significantly lower in Group Butorphanol than in Group Saline (13.0% vs 79.6%; RR = 0.163, 95%CI: 0.081-0.329; χ² = 48.265, p <0.0001). The severity levels of myoclonic movement were also significantly lower in Group Butorphanol than in Group Saline (p <0.0001). Throughout the procedure, changes of BP, SpO₂, and HR did not differ between the groups. There were no problems with bradycardia or hypotension. Infusion of 0.015 mg/kg butorphanol 2 minutes before etomidate administration is effective for suppressing myoclonus induced by etomidate during induction of general anaesthesia.

  11. The cardiopulmonary effects of etorphine, azaperone, detomidine, and butorphanol in field-anesthetized white rhinoceroses (Ceratotherium simum).

    Science.gov (United States)

    Wenger, Sandra; Boardman, Wayne; Buss, Peter; Govender, Danny; Foggin, Chris

    2007-09-01

    White rhinoceroses (Ceratotherium simum) anesthetized with etorphine combinations develop severe pathophysiologic changes, including hypoventilation, hypoxemia and metabolic acidosis. The aim of this study was to evaluate the addition of butorphanol to the immobilizing mixture on the cardiopulmonary effects in free-ranging white rhinoceroses darted from the helicopter. In the control group (n=15), the rhinoceroses were anesthetized with etorphine, azaperone, detomidine, and hyaluronidase administered intramuscularly. In the treatment group (n=16), 10-20 mg of butorphanol was added to the combination. Within 10 min of becoming immobile, vital parameters (heart rate, respiratory rate, and temperature) and blood gas analyses were taken, and measurements were repeated after 10 (treatment group) and 20 min (control group). Both groups showed respiratory and metabolic acidosis, hypoxemia, and hypercapnia. In the control group, the arterial partial pressure of oxygen was significantly higher and the alveolar-to-arterial oxygen pressure gradients were significantly lower in all body positions compared with the butorphanol group. Oxygen hemoglobin saturation in the control group was higher than in the butorphanol group only in the lateral position. Improvements in arterial oxygen levels were observed in all animals when placed in sternal recumbency. There were no significant differences in the mean induction times between groups, but the distance the butorphanol group ran was significantly less after darting than in the control group. By adding butorphanol to the immobilizing mixture, no benefits in ventilation were seen; although, size differences make comparisons difficult. Running for a shorter distance during induction could be beneficial in the prevention of severe acid-base imbalances and capture myopathy.

  12. Butorphanol Nasal Spray

    Science.gov (United States)

    ... butorphanol, any other medications, or benzethonium chloride (a preservative found in some medications and personal care products). ... voices that do not exist), fever, sweating, confusion, fast heartbeat, ... the Food and Drug Administration's (FDA) MedWatch Adverse Event Reporting ...

  13. Comparison of epidural butorphanol versus epidural morphine in postoperative pain relief.

    Science.gov (United States)

    Parikh, Geeta P; Veena, Shah R; Vora, Kalpana; Parikh, Beena; Joshi, Anish

    2014-02-01

    Epidural route is preferable for postoperative pain relief in thoraco-abdominal and lower limb surgeries. We aimed to compare epidural butorphanol versus morphine for postoperative analgesia up to 24 hours in open nephrectomy surgery. 80 ASA physical status I and II adult patients were selected for this randomized double blind prospective study. A standard balanced general anesthesia technique was applied for all patients. Epidural catheter was placed in lower thoracic inter-vertebral space before the start of surgery. Injection butorphanol 0.04 mg/kg in group B (n = 40) or morphine 0.06 mg/kg in group M (n = 40) was given in a double blind manner after completion of surgery and before extubation through the epidural catheter. Patients were observed for pain relief by Visual Analogue Scale (VAS) for the next 24 hours. Dose was repeated when VAS was > 4. The onset and peak effect of pain relief, duration of analgesia of 1st dose, frequency of drug administration and side effects if any were observed. The average onset of analgesia was 26.5 +/- 7.61 minutes with butorphanol and 62.5 +/- 13.4 minutes with morphine group which was statistically significant (p < 0.05). The mean peak effect of pain relief following 1st dose was 173 +/- 51.25 minutes with butorphanol and 251 +/- 52.32 minutes with morphine group. The duration of pain relief after 1st dose was statistically significant and was 339.13 +/- 79.57 minutes in group B and 709.75 +/- 72.12 minutes in group M which was gradually increased on repeated dosing in group B while it was almost same in Group M. Number of doses required in 24 hours was significantly higher (p < 0.05) in butorphanol group than morphine group. Somnolence was the main side effect in group B while pruritus was the main side effect with group M. Epidural butorphanol appears to provide safer and faster postoperative analgesia without much untoward effects but its analgesic action is short so more repeated doses are required than morphine via

  14. Butorphanol in perspective.

    Science.gov (United States)

    Rosow, C E

    1988-01-01

    Butorphanol tartrate is a highly effective opioid agonist-antagonist analgesic with qualitative as well as quantitative differences from the pure agonists. These differences are thought to be due to interaction with a distinct subset of opioid receptors. Although it relieves severe pain, the drug does not usually elevate mood, and it may occasionally cause dysphoria. Counterbalancing its disadvantages is a wealth of clinical experience with the drug showing an impressive record of safety. Butorphanol produces limited respiratory depression and smooth muscle spasm, and both effects are reversible with naloxone. The most prominent side effect is sedation, a property that is generally quite useful in the perioperative period. Butorphanol is a weak morphine antagonist, so it may interact with agonists like morphine or fentanyl. The chief advantages of this agent are its low toxicity and very low potential for abuse.

  15. The sedative and analgesic effects of detomidine-butorphanol and detomidine alone in donkeys.

    Science.gov (United States)

    Joubert, K E; Briggs, P; Gerber, D; Gottschalk, R G

    1999-09-01

    Butorphanol and detomidine constitute an effective combination for sedation and analgesia in horses. This trial was undertaken to assess the effectiveness of this combination in donkeys. The detomidine and butorphanol were given intravenously one after the other. A dose of 10 microg/kg of detomidine and 25 microg/kg of butorphanol was used. Sedation is easily extended by additional doses of butorphanol. The average dose of detomidine was 11.24 microg/kg and that of butorphanol was 28.0 microg/kg. Four donkeys in the detomidine group required additional sedation and analgesia. Detomidine alone did not totally eliminate coronary band pain. Heart rates dropped significantly in the first minute after the injection of the combination. One donkey developed an atrioventricular block, while another developed a sino-atrial block. Four donkeys developed a Cheyne-Stokes respiratory pattern. The combination of detomidine and butorphanol is an effective combination for sedation and analgesia of donkeys for standing procedures.

  16. Nasal inhalation of butorphanol in combination with ketamine quickly elevates the mechanical pain threshold in the model of chronic constriction injury to the sciatic nerve of rat.

    Science.gov (United States)

    Chen, Feng; Wang, LiQin; Chen, ShuJun; Li, ZhiGao; Chen, ZhouLin; Zhou, XinHua; Zhai, Dong

    2014-01-01

    The aim of the present study is to explore the impact of butorphanol in combination with ketamine via nasal inhalation (NI) on neuropathic pain induced by chronic constriction injury (CCI) to the sciatic nerve in a rat model. CCI rats (n = 12) were equally randomized to four groups based on the treatments received as follows: 100 μL of 0.9% normal saline via NI (NS/NI group); 100 μg of butorphanol plus 1 mg of ketamine via NI (B + K/NI group); 100 μg of butorphanol alone via NI (B/NI group); and 100 μg of butorphanol plus 1 mg of ketamine via subcutaneous injection (B + K/SC group). Mechanical pain threshold was measured at 10 min, 30 min, 2 h, 4 h, and 6 h after drug administration. The mechanical pain threshold in the B + K/NI group was improved significantly 4 h after drug administration as compared with that in the B/NI or B + K/SC group (P ketamine quickly elevates the mechanical pain threshold in a rat neuropathic pain model induced by CCI to the sciatic nerve. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Dose sparing of induction dose of propofol by fentanyl and butorphanol: A comparison based on entropy analysis

    Directory of Open Access Journals (Sweden)

    Jasleen Kaur

    2013-01-01

    Full Text Available Background: The induction dose of propofol is reduced with concomitant use of opioids as a result of a possible synergistic action. Aim and Objectives: The present study compared the effect of fentanyl and two doses of butorphanol pre-treatment on the induction dose of propofol, with specific emphasis on entropy. Methods: Three groups of 40 patients each, of the American Society of Anaesthesiologistsphysical status I and II, were randomized to receive fentanyl 2 μg/kg (Group F, butorphanol 20 μg/kg (Group B 20 or 40 μg/kg (Group B 40 as pre-treatment. Five minutes later, the degree of sedation was assessed by the observer′s assessment of alertness scale (OAA/S. Induction of anesthesia was done with propofol (30 mg/10 s till the loss of response to verbal commands. Thereafter, rocuronium 1 mg/kg was administered and endotracheal intubation was performed 2 min later. OAA/S, propofol induction dose, heart rate, blood pressure, oxygen saturation and entropy (response and state were compared in the three groups. Statistical Analysis: Data was analyzed using ANOVA test with posthoc significance, Kruskal-Wallis test, Chi-square test and Fischer exact test. A P<0.05 was considered as significant. Results: The induction dose of propofol (mg/kg was observed to be 1.1±0.50 in Group F, 1.05±0.35 in Group B 20 and 1.18±0.41 in Group B40. Induction with propofol occurred at higher entropy values on pre-treatment with both fentanyl as well as butorphanol. Hemodynamic variables were comparable in all the three groups. Conclusion: Butorphanol 20 μg/kg and 40 μg/kg reduce the induction requirement of propofol, comparable to that of fentanyl 2 μg/kg, and confer hemodynamic stability at induction and intubation.

  18. Intramuscular injection of alfaxalone in combination with butorphanol for sedation in cats.

    Science.gov (United States)

    Deutsch, Julia; Jolliffe, Colette; Archer, Emma; Leece, Elizabeth A

    2017-07-01

    To assess quality of sedation following intramuscular (IM) injection of two doses of alfaxalone in combination with butorphanol in cats. Prospective, randomized, 'blinded' clinical study. A total of 38 cats undergoing diagnostic imaging or noninvasive procedures. Cats were allocated randomly to be administered butorphanol 0.2 mg kg -1 combined with alfaxalone 2 mg kg -1 (group AB2) or 5 mg kg -1 (group AB5) IM. If sedation was inadequate, alfaxalone 2 mg kg -1 IM was administered and cats were excluded from further analysis. Temperament [1 (friendly) to 5 (aggressive)], response to injection, sedation score at 2, 6, 8, 15, 20, 30, 40, 50 and 60 minutes, overall sedation quality scored after data collection [1 (excellent) to 4 (inadequate)] and recovery quality were assessed. Heart rate (HR), respiratory rate (f R ) and arterial haemoglobin saturation (SpO 2 ) were recorded every 5 minutes. Groups were compared using t tests and Mann-Whitney U tests. Sedation was analysed using two-way anova, and additional alfaxalone using Fisher's exact test (p cats in AB2 and two in AB5 (p = 0.005). Recovery quality, HR, f R and SpO 2 were similar. Seven cats required oxygen supplementation. Complete recovery times were shorter in AB2 (81.8 ± 24.3 versus 126.6 ± 33.3 minutes; p = 0.009). Twitching was the most common adverse event. In combination with butorphanol, IM alfaxalone at 5 mg kg -1 provided better quality sedation than 2 mg kg -1 . Monitoring of SpO 2 is recommended. Copyright © 2017 Association of Veterinary Anaesthetists and American College of Veterinary Anesthesia and Analgesia. Published by Elsevier Ltd. All rights reserved.

  19. Intravenous sedation for implant surgery: midazolam, butorphanol, and dexmedetomidine versus midazolam, butorphanol, and propofol.

    Science.gov (United States)

    Kawaai, Hiroyoshi; Tomita, Shu; Nakaike, Yoshihiro; Ganzberg, Steven; Yamazaki, Shinya

    2014-02-01

    We compared the amnesic action, recovery process, and satisfaction of patients and surgeons after the use of 2 different sedation regimens for 40 patients undergoing scheduled implant surgery. Butorphanol, midazolam, dexmedetomidine (BMD) was administered to 20 patients who were maintained with continuous infusion of dexmedetomidine after the induction with butorphanol and midazolam, and butorphanol, midazolam, propofol (BMP) was administered to 20 patients who were maintained with continuous infusion of propofol after the induction with butorphanol and midazolam. To assess the amnesic action, the memory of local anesthesia, auditory memory, and visual memory were evaluated. The Trieger Dot Test (TDT) was applied during the recovery process. A questionnaire regarding the patient's feelings of the management of sedation was taken from each patient and was also filled out by the surgeon. The comparison between groups was analyzed by the Mann-Whitney U test. No significant differences in the amnesic action and the TDT were noted. Both methods also satisfied the patients and surgeons, as determined by the questionnaire results. In conclusion, both sedation regimens are appropriate for implant surgery.

  20. Accidental poisoning with detomidine and butorphanol.

    Science.gov (United States)

    Hannah, N

    2010-09-01

    This is a case report concerning a veterinarian who spilled detomidine and butorphanol on dermatitic hands while sedating a horse. This resulted in acute poisoning from which the patient spontaneously recovered with supportive management. Veterinarians often suffer from occupational dermatitis and handle strong sedatives with no gloves while working around unpredictable animals. Thus, this group is at risk of accidental self-poisoning from this method.

  1. Changes of Vital Parameters after Administration of Butorphanol during Tiletamine-Zolazepam-Ketamine-Xylazine Anaesthesia for Joint Surgery in Miniature Pigs

    Directory of Open Access Journals (Sweden)

    P. Raušer

    2008-01-01

    Full Text Available The study compares the effects of butorphanol in pigs undergoing joint surgery in tiletamine-zolazepam-ketamine-xylazine (TKX anaesthesia. A total of 12 pigs were divided into 2 groups by 6 animals - BUT (anaesthetized with TKX combination and butorphanol and CON (control group - anaesthetized with TKX combination only. All pigs were sedated with a mix of tiletamin-zolazepam-ketamin-xylazin, put into total anaesthesia using propofol, and connected to an anaesthesiology unit (O2-Air. For 40 min we logged the heart rate (HR, respiratory rate (RR, mean arterial pressure (MAP, haemoglobin saturation by oxygen (SpO2 and end-tidal CO2 concentration (ETCO2 values. Ten minutes after connecting to the devices, the pigs in the BUT group were intravenously administered butorphanol (0.2 mg/kg in the total volume of 2 ml, or physiological saline in the same volume. The pigs in the BUT group had a lower (p th, 10th and 25th min, and a lower RR in the 10th, 15th and 20th min. MAP, ETCO2 and SpO2 values did not differ substantially. Butorphanol can thus be identified as a suitable analgesic TKX supplement to anaesthesia of miniature pigs with minimum effect on vital functions.

  2. Comparative evaluation of halothane anaesthesia in medetomidine–butorphanol and midazolam–butorphanol premedicated water buffaloes (Bubalus bubalis

    Directory of Open Access Journals (Sweden)

    V. Malik

    2011-04-01

    Full Text Available Six clinically healthy male water buffaloes (Bubalus bubalis 2–3 years of age and weighing 290–325 kg were used for 2 different treatments (H1 andH2. The animals of groupH1 were premedicated with medetomidine (2.5 g/kg, i.v. and butorphanol (0.05 mg/kg, i.v., while in groupH2 midazolam (0.25 mg/kg and butorphanol (0.05 mg/kg were used intravenously. Induction of anaesthesia was achieved by 5%thiopental sodium inH1 (3.85±0.63 mg/kg and H2 (6.96 ± 0.45 mg/kg groups. The anaesthesia was maintained with halothane in 100 % oxygen through a large animal anaesthetic machine. Better analgesia and sedation with a significantly lower dose of thiopental for induction and significantly higher values of sternal recumbency time and standing time were recorded in group H1 than in group H2 , whereas no significant (P > 0.05 difference for the halothane concentration was observed between groups H1 and H2. Significant decrease in heart rate was observed in group H1 whereas it significantly increased in group H2. In both groups, RR decreased during the preanaesthetic period, which increased significantly (P 0.05 after premedication and a significant (P<0.05 occurredafter thiopental administration. In both groups a significant (P<0.01 increase in CVP and a significant (P<0.01 decrease in SpO2 were observed after premedication which persisted up to 120 min. ECG changes included significant (P<0.01 decrease and increase in QRS amplitudes in groupsH1 andH2 respectively, a significant (P < 0.05 increase in PR interval was recorded at 15 min in group H1, a significant (P<0.05 decrease in PR interval in groupH2 , a significant (P<0.05 decrease in T wave amplitude in groupH1, and a significant (P<0.01 increase in duration of T wave in groupH1 . It is concluded that both combinations can be used safely in buffaloes for surgery of 2 h duration but better sedation, analgesia and muscular relaxation and more dose sparing effect on anaesthetics and shorter recovery times

  3. Injectable Anesthesia for Mice: Combined Effects of Dexmedetomidine, Tiletamine-Zolazepam, and Butorphanol

    Directory of Open Access Journals (Sweden)

    Laura A. Cagle

    2017-01-01

    Full Text Available Anesthetic protocols for murine models are varied within the literature and medetomidine has been implicated in the development of urethral plugs in male mice. Our objective was to evaluate the combination of butorphanol, dexmedetomidine, and tiletamine-zolazepam. A secondary objective was to identify which class of agent was associated with urethral obstructions in male mice. BALB/c male (n=13 and female (n=23 mice were assigned to dexmedetomidine and tiletamine-zolazepam with or without butorphanol or to single agent dexmedetomidine or tiletamine-zolazepam. Anesthesia was achieved in 58% (14/24 of mice without butorphanol and in 100% (24/24 of mice with butorphanol. The combination of dexmedetomidine (0.2 mg/kg, tiletamine-zolazepam (40 mg/kg, and butorphanol (3 mg/kg resulted in an induction and anesthetic duration of 12 and 143 minutes, respectively. Urethral obstructions occurred in 66% (25/38 of trials in male mice that received dexmedetomidine with a mortality rate of 38% (5/13. Tiletamine-zolazepam, when used alone, resulted in a 0% (0/21 incidence of urethral obstructions. Combination use of dexmedetomidine, tiletamine-zolazepam, and butorphanol results in a longer and more reliable duration of anesthesia than the use of dexmedetomidine and tiletamine-zolazepam alone. Dexmedetomidine is not recommended for use in nonterminal procedures in male mice due to the high incidence of urethral obstructions and resultant high mortality rate.

  4. Effects of carprofen and meloxicam with or without butorphanol on the minimum alveolar concentration of sevoflurane in dogs.

    Science.gov (United States)

    Yamashita, Kazuto; Okano, Yoshihiko; Yamashita, Maiko; Umar, Mohammed A; Kushiro, Tokiko; Muir, William W

    2008-01-01

    Sparing effects of carprofen and meloxicam with or without butorphanol on the minimum alveolar concentration (MAC) of sevoflurane were determined in 6 dogs. Anesthesia was induced and maintained with sevoflurane in oxygen, and MAC was determined by use of a tail clamp method. The dogs were administered a subcutaneous injection of carprofen (4 mg/kg) or meloxicam (0.2 mg/kg), or no medication (control) one hour prior to induction of anesthesia. Following the initial determination of MAC, butorphanol (0.3 mg/kg) was administered intramuscularly, and MAC was determined again. The sevoflurane MACs for carprofen alone (2.10 +/- 0.26%) and meloxicam alone (2.06 +/- 0.20%) were significantly less than the control (2.39 +/- 0.26%). The sevoflurane MACs for the combination of carprofen with butorphanol (1.78 +/- 0.20%) and meloxicam with butorphanol (1.66 +/- 0.29%) were also significantly less than the control value after the administration of butorphanol (2.12 +/- 0.28%). The sevoflurane sparing effects of the combinations of carprofen with butorphanol and meloxicam with butorphanol were additive.

  5. Applicable observation of butorphanol in painless colonoscopy examination

    Directory of Open Access Journals (Sweden)

    Li Xuefeng

    2017-01-01

    Full Text Available Objective:To summarize the clinical effect of butorphanol compound propofol in painless colonoscopy examination and its feasibility.Methods:100 colonoscopy examination patients (56 males and 44 females aged from 19 to 60 years old registered between August, 2016 and September, 2016 in the endoscopy center of our hospital were randomly selected. ASA classification is I or II level. Their body weight ranged from 55 kg to 75kg. They were randomly divided into two groups and each group included 50 cases. All patients went through conventional ambrosia and liquid fasting for 8 hours before the anesthesia and they drank magnesium sulfate liquid of 2500ml to clean their gastrointestinal tracts.After patients entered the operating room, their veins of upper limb were opened so as to monitor their HR, MAP and SPO2. After that, butorphanol of 20μg/kg was injected to patients of the experimental group while normal saline of the same amount of was injected to patients of the contrast group. After 60 seconds, propofol of 1~2 mg/kg was injected to both groups by the way of intravenous injection. The enteroscopy examination was started after patients had no eyelash reflection. Besides, actual application dose of propofol was adjusted according to clinical indications of patients and the adjusting frequency each time was controlled between 30 milligrams and 50 milligrams until the completion of the examination. SPSS 22.0 statistical software was used to analyze and handle research data of this group. Results:Anesthesia effect: The difference of inter-group comparison showed no statistical significance (P>0.05. The intra-group comparison and the inter-group comparison show that the difference in terms of changes of HR, MAP and SpO2 of patients in two groups before and after the anesthesia had no statistical significance (P>0.05.The awakening time, VAS score, postoperative vomiting times and the occurrence rate of respiratory depression of the observation group

  6. Efficacy of tramadol and butorphanol pretreatment in reducing pain on propofol injection: A placebo-controlled randomized study.

    Science.gov (United States)

    Singh, Arvinderpal; Sharma, Geeta; Gupta, Ruchi; Kumari, Anita; Tikko, Deepika

    2016-01-01

    Pain of propofol injection has been recalled by many patients as the most painful part of the induction of anesthesia. Tramadol and butorphanol are commonly used analgesics for perioperative analgesia in anesthesia practice. However, their potential to relieve propofol injection pain still needs to be explored. A randomized, double-blind, placebo-controlled study was conducted on 90 American Society of Anesthesiologists I and II adult patients undergoing elective surgery under general anesthesia with propofol as an induction agent. Consecutive sampling technique with random assignment was used to allocate three groups of 30 patients each. Group I patients received an injection of normal saline 3 ml intravenously (placebo) while Group II and Group III patients received injection of tramadol 50 mg and butorphanol 1 mg intravenously, respectively. Before induction of anesthesia patients were asked about the intensity of pain on propofol injection by using visual analog scale (VAS) before the loss of consciousness. Descriptive statistics and analysis of variance with Chi-square test were used to analyze the data. The value of P pain in Group I was observed in 80% of the patients, while it was observed in 23.33% and 20% of patients in Group II and III, respectively. Mean VAS scores were 2.27 ± 1.51, 1.14 ± 1.74, and 1.03 ± 1.72 in Group I, II, and Group III patients, respectively. The incidence of pruritus was 10% and 6.7% and erythema in 13.2% and 6.7% in Group II and III, respectively. Pretreatment with both butorphanol and tramadol significantly reduced pain on propofol injection; however, they exhibited comparable efficacy among each other. Thus, either of these two drugs can be considered for pretreatment to reduce propofol injection pain.

  7. Biopharmaceutical evaluation of transnasal, sublingual, and buccal disk dosage forms of butorphanol.

    Science.gov (United States)

    Shyu, W C; Mayol, R F; Pfeffer, M; Pittman, K A; Gammans, R E; Barbhaiya, R H

    1993-07-01

    A series of three-way crossover randomized studies were conducted to evaluate the absolute bioavailability of butorphanol, a potent agonist-antagonist analgesic, from transnasal, sublingual, and buccal disk formulations in order to identify a practical alternative to oral administration. In each study, healthy male volunteers received 2 mg doses of butorphanol tartrate intravenously and either transnasally, sublingually or buccally. Serial blood samples were collected over 12 h and butorphanol plasma concentrations were determined by radioimmunoassay. The plasma concentration data were subjected to non-compartmental pharmacokinetic analysis. The elimination half-life of butorphanol was about 3-5 h and was independent of the route of administration. Absorption of butorphanol following transnasal administration was faster than that observed following sublingual or buccal administration. Mean absolute bioavailabilities of sublingual tablet and buccal disk formulation were only 19 per cent and 29 per cent, respectively, but for transnasal administration the value rose significantly, to 70 per cent. Based on the results of these studies, transnasal dosage form of butorphanol was selected for further clinical trials of treatment of moderate to severe pain.

  8. Analgesic efficacy of butorphanol and morphine in bearded dragons and corn snakes.

    Science.gov (United States)

    Sladky, Kurt K; Kinney, Matthew E; Johnson, Stephen M

    2008-07-15

    To test the hypothesis that administration of butorphanol or morphine induces antinociception in bearded dragons and corn snakes. Prospective crossover study. 12 juvenile and adult bearded dragons and 13 corn snakes. Infrared heat stimuli were applied to the plantar surface of bearded dragon hind limbs or the ventral surface of corn snake tails. Thermal withdrawal latencies (TWDLs) were measured before (baseline) and after SC administration of physiologic saline (0.9% NaCl) solution (equivalent volume to opioid volumes), butorphanol tartrate (2 or 20 mg/kg [0.91 or 9.1 mg/lb]), or morphine sulfate (1, 5, 10, 20, or 40 mg/kg [0.45, 2.27, 4.5, 9.1, or 18.2 mg/lb]). For bearded dragons, butorphanol (2 or 20 mg/kg) did not alter hind limb TWDLs at 2 to 24 hours after administration. However, at 8 hours after administration, morphine (10 and 20 mg/kg) significantly increased hind limb TWDLs from baseline values (mean +/- SEM maximum increase, 2.7+/-0.4 seconds and 2.8+/-0.9 seconds, respectively). For corn snakes, butorphanol (20 mg/kg) significantly increased tail TWDLs at 8 hours after administration (maximum increase from baseline value, 3.0+/-0.8 seconds); the low dose had no effect. Morphine injections did not increase tail TWDLs at 2 to 24 hours after administration. Compared with doses used in most mammalian species, high doses of morphine (but not butorphanol) induced analgesia in bearded dragons, whereas high doses of butorphanol (but not morphine) induced analgesia in corn snakes.

  9. Effect of epidural butorphanol-bupivacaine for postoperative analgesia after abdominal hysterectomy%硬膜外布托啡诺联合布比卡因用于子宫切除术术后镇痛的效应

    Institute of Scientific and Technical Information of China (English)

    朱俊峰; 顾国华

    2011-01-01

    目的 评价布托啡诺联合布比卡因用于妇科子宫切除术术后硬膜外镇痛的效应.方法 60例连续硬膜外麻醉下行子宫切除手术患者,依术后硬膜外镇痛用药不同,随机分为3组,每组20例.A组:布托啡诺2 mg用生理盐水稀释至10 ml;B组:布托啡诺2 mg复合0.125%布比卡因10 ml;C组:布托啡诺2 mg复合0.25%布比卡因10 ml.记录上述各组术后2、6、24 h的视觉模拟评分(VAS)、镇痛起效时间、持续时间及不良反应发生情况.结果 B、C两组术后镇痛起效时间明显短于A组(P<0.05),镇痛持续时间明显长于A组(P<0.05),术后6、24 h VAS评分,B、C两组明显低于A组(P<0.05),三组呼吸抑制及恶心、呕吐的发生情况比较差异无统计学意义.结论 布托啡诺2 mg联合0.125%布比卡因用于妇科子宫切除手术术后硬膜外镇痛,较单独使用布托啡诺起效快、镇痛持续时间长.%Objective To evalatue the efficacy of epidural butorphanol with and without bupivacaine in postoperative analgesia following abdominal hysterectomy. Methods Sixty patients undergoing abdominal hysterectomy were randomly divided into three groups during the postoperative period to receive one of three epidural regimens:2 mg of butorphanol in 10 ml of normal saline (group A), 2 mg of butorphanol in 10 ml of 0.125% bupivacaine (group B), or 2 mg of butorphanol in 10 ml of 0.25% bupivacaine (group C).The visual analog scales(VAS),onset and duration of analgesia, frequency and severity of respiratory depression,nausea and vomiting for 24 hours were recorded. Results The addition of butorphanol to bupivacaine resulted in significantly (P<0.05) faster onset of pain relief. The duration of analgesia was prolonged in patients receiving butorphanol with bupivacaine combination as compared with butorphanol alone (P<0.05). The differences between group B and group C were not significant. Conclusions Addition of 2 mg of butorphanol to 0.125% of epidural bupivacaine

  10. Evaluation of intranasal oxygen supplementation in mules anesthetized with the combination of ketamine, butorphanol, and guaifenesin

    Directory of Open Access Journals (Sweden)

    T.J.C. Módolo

    Full Text Available ABSTRACT Hypoxemia is a major complication of field anesthesia and no studies regarding this occurrence in mules has been done. Thus, the aim of this study was to evaluate intranasal oxygen supplementation (IOS in mules (Equus caballus x Equus asinus anesthetized with ketamine/butorphanol/guaifenesin combination. For this, we used six male, adult mules (322±29kg which underwent premedication (MPA with 0.2mg/kg of midazolam intramuscularly after 15 minutes, 0.02mg/kg detomidine IV 5 minutes after, induction IV with combination of ketamine (2mg/mL, butorphanol (22.5mg/mL, and guaifenesin (50mg/mL (K/B/G until lateral decumbency. Maintenance was done with the same anesthetic combination. The animals were submitted twice to the protocol described above, 20 days apart, forming two groups. CG: MPA, induction (0.92±0.24mL/kg (mean±SD, and maintenance (2.2±0.2mL/kg/h without SIO; TG: MPA, induction (0.98±0.17mL/kg, and maintenance (2.3±0.4mL/kg/h with IOS flow 40mL/kg/h. During anesthesia arterial blood was collected every 20 minutes (T0, T20, T40, and T60 for blood gas analysis. Data analyzed by ANOVA followed by the Bonferroni test. P<0.05 was considered significant. Hypoxemia of the animals in the CG in periods (59±5; 55±5; 53±7; 49±8 with lower averages than the TG (160±4, 115±34, 92±25, 81±19 was observed, demonstrating that IOS increases PaO2 avoiding the occurrence of hypoxemia.

  11. In vitro characterization of a formulation of butorphanol tartrate in a poloxamer 407 base intended for use as a parenterally administered slow-release analgesic agent.

    Science.gov (United States)

    Laniesse, Delphine; Smith, Dale A; Knych, Heather K; Mosley, Cornelia; Guzman, David Sanchez-Migallon; Beaufrère, Hugues

    2017-06-01

    OBJECTIVE To assess rheological properties and in vitro diffusion of poloxamer 407 (P407) and butorphanol-P407 (But-P407) hydrogels and to develop a sustained-release opioid formulation for use in birds. SAMPLE P407 powder and a commercially available injectable butorphanol tartrate formulation (10 mg/mL). PROCEDURES P407 and But-P407 gels were compounded by adding water or butorphanol to P407 powder. Effects of various concentrations of P407 (20%, 25% and 30% [{weight of P407/weight of diluent} × 100]), addition of butorphanol, and sterilization through a microfilter on rheological properties of P407 were measured by use of a rheometer. In vitro diffusion of butorphanol from But-P407 25% through a biological membrane was compared with that of a butorphanol solution. RESULTS P407 20% and 25% formulations were easily compounded, whereas it was difficult to obtain a homogenous P407 30% formulation. The P407 was a gel at avian body temperature, although its viscosity was lower than that at mammalian body temperature. The But-P407 25% formulation (butorphanol concentration, 8.3 mg/mL) was used for subsequent experiments. Addition of butorphanol to P407 as well as microfiltration did not significantly affect viscosity. Butorphanol diffused in vitro from But-P407, and its diffusion was slower than that from a butorphanol solution. CONCLUSIONS AND CLINICAL RELEVANCE But-P407 25% had in vitro characteristics that would make it a good candidate for use as a sustained-release analgesic medication. Further studies are needed to characterize the pharmacokinetic and pharmacodynamic properties of But-P407 25% in vivo before it can be recommended for use in birds.

  12. Butorphanol suppresses fentanyl-induced cough during general anesthesia induction

    OpenAIRE

    Cheng, Xiao-Yan; Lun, Xiao-Qin; Li, Hong-Bo; Zhang, Zhi-Jie

    2016-01-01

    Abstract Fentanyl-induced cough (FIC) is unwanted in the patients requiring stable induction of general anesthesia. This study was designed to evaluate the suppressive effects of butorphanol pretreatment on the incidence and severity of FIC during the induction of general anesthesia. A total of 315 patients of American Society of Anesthesiologists physical status I and II, scheduled for elective surgery under general anesthesia were randomized into 3 equally sized groups (n = 0105). Two minut...

  13. Comparison of intramuscular alfaxalone and ketamine combined with dexmedetomidine and butorphanol for castration in cats.

    Science.gov (United States)

    Khenissi, Latifa; Nikolayenkova-Topie, Olga; Broussaud, Ségolène; Touzot-Jourde, Gwenola

    2017-08-01

    Objectives Cardiorespiratory parameters and anaesthesia quality in cats anaesthetised with either intramuscular (IM) alfaxalone or ketamine both combined with dexmedetomidine and butorphanol for castration were evaluated. Methods Thirty-two client-owned cats were randomly assigned to receive either alfaxalone (A; 3 mg/kg IM) or ketamine (K; 5 mg/kg IM), combined with dexmedetomidine (10 μg/kg) and butorphanol (0.2 mg/kg). Heart rate (HR), respiratory rate (RR) and rectal temperature (T°) were recorded prior to drug administration. Pulse rate (PR) and RR were recorded 10 (T 10 ) and 15 (T 15 ) mins after injection (T 0 ). Cardiorespiratory values (PR, RR, SPO 2 , blood pressure, P E 'CO 2 ) were recorded every 5 mins for the duration of the procedure. Pain at injection, intubation and recovery were evaluated with simple descriptive scores. Feasibility of anaesthesia was evaluated by the number of top-ups of anaesthetic needed. Cat attitude, ability to walk and presence of ataxia were assessed several times after extubation (T exmin ) and the time between injection and extubation recorded. Pain was assessed at T ex120 and T ex240 with the 4Avet-pain score. Results The RR was significantly lower in group K at T 10 (RR K = 28 ±13.35 breaths per minute [brpm], RR A = 43.24 ±7.04 brpm) and T 15 (RR K = 28 ±11.53 brpm vs RR A = 43 ±12.18 brpm). Time to extubation was significantly longer in group A (T A = 62 ±14.6 mins, T K = 45.13 ± 7.38 mins). Cats in group K needed more top-ups, were more ataxic at T ex120 , had a worse recovery score at T ex60 and were less willing to walk at T ex30 . Conclusions and relevance Cats receiving alfaxalone had a longer but better quality recovery. Cardiorespiratory parameters were stable and within clinically acceptable values following IM injection of either alfaxalone or ketamine in healthy cats. Intramuscular alfaxalone is a suitable alternative to ketamine for short procedures requiring anaesthesia when used in combination

  14. Sedative and mechanical hypoalgesic effects of butorphanol in xylazine-premedicated donkeys.

    Science.gov (United States)

    Lizarraga, I; Castillo-Alcala, F

    2015-05-01

    Combinations of α2 -adrenoceptor and opioid agonists are commonly used in equids, but little scientific information is available on donkeys. To compare the sedative and hypoalgesic effects of xylazine alone or in combination with different dosages of butorphanol in donkeys. Placebo-controlled, operator-blinded, randomised, crossover, Latin square study. Six donkeys received intravenous normal saline and normal saline (NS-NS); xylazine (0.5 mg/kg bwt) and normal saline (X-NS); xylazine and 10 μg/kg bwt butorphanol (X-B10); xylazine and 20 μg/kg bwt butorphanol (X-B20); xylazine and 30 μg/kg bwt butorphanol (X-B30); and xylazine and 40 μg/kg bwt butorphanol (X-B40). Sedation scores (SS), head height above ground (HHAG) and mechanical nociceptive thresholds (MNT) were assessed before and for 120 min after treatment. Areas under the curve (AUC) values for 0-30, 30-60 and 60-120 min were computed for SS, HHAG and MNT. As appropriate, differences between treatments were analysed using the Friedman test followed by Dunn's test and a repeated measures one-way analysis of variance followed by Tukey's test; significance was set at Pdonkeys undergoing certain clinical procedures. © 2014 EVJ Ltd.

  15. Effect of sedation with detomidine and butorphanol on pulmonary gas exchange in the horse.

    Science.gov (United States)

    Nyman, Görel; Marntell, Stina; Edner, Anna; Funkquist, Pia; Morgan, Karin; Hedenstierna, Göran

    2009-05-07

    Sedation with alpha2-agonists in the horse is reported to be accompanied by impairment of arterial oxygenation. The present study was undertaken to investigate pulmonary gas exchange using the Multiple Inert Gas Elimination Technique (MIGET), during sedation with the alpha2-agonist detomidine alone and in combination with the opioid butorphanol. Seven Standardbred trotter horses aged 3-7 years and weighing 380-520 kg, were studied. The protocol consisted of three consecutive measurements; in the unsedated horse, after intravenous administration of detomidine (0.02 mg/kg) and after subsequent butorphanol administration (0.025 mg/kg). Pulmonary function and haemodynamic effects were investigated. The distribution of ventilation-perfusion ratios (VA/Q) was estimated with MIGET. During detomidine sedation, arterial oxygen tension (PaO2) decreased (12.8 +/- 0.7 to 10.8 +/- 1.2 kPa) and arterial carbon dioxide tension (PaCO2) increased (5.9 +/- 0.3 to 6.1 +/- 0.2 kPa) compared to measurements in the unsedated horse. Mismatch between ventilation and perfusion in the lungs was evident, but no increase in intrapulmonary shunt could be detected. Respiratory rate and minute ventilation did not change. Heart rate and cardiac output decreased, while pulmonary and systemic blood pressure and vascular resistance increased. Addition of butorphanol resulted in a significant decrease in ventilation and increase in PaCO2. Alveolar-arterial oxygen content difference P(A-a)O2 remained impaired after butorphanol administration, the VA/Q distribution improved as the decreased ventilation and persistent low blood flow was well matched. Also after subsequent butorphanol no increase in intrapulmonary shunt was evident. The results of the present study suggest that both pulmonary and cardiovascular factors contribute to the impaired pulmonary gas exchange during detomidine and butorphanol sedation in the horse.

  16. Effect of sedation with detomidine and butorphanol on pulmonary gas exchange in the horse

    Directory of Open Access Journals (Sweden)

    Morgan Karin

    2009-05-01

    Full Text Available Abstract Background Sedation with α2-agonists in the horse is reported to be accompanied by impairment of arterial oxygenation. The present study was undertaken to investigate pulmonary gas exchange using the Multiple Inert Gas Elimination Technique (MIGET, during sedation with the α2-agonist detomidine alone and in combination with the opioid butorphanol. Methods Seven Standardbred trotter horses aged 3–7 years and weighing 380–520 kg, were studied. The protocol consisted of three consecutive measurements; in the unsedated horse, after intravenous administration of detomidine (0.02 mg/kg and after subsequent butorphanol administration (0.025 mg/kg. Pulmonary function and haemodynamic effects were investigated. The distribution of ventilation-perfusion ratios (VA/Q was estimated with MIGET. Results During detomidine sedation, arterial oxygen tension (PaO2 decreased (12.8 ± 0.7 to 10.8 ± 1.2 kPa and arterial carbon dioxide tension (PaCO2 increased (5.9 ± 0.3 to 6.1 ± 0.2 kPa compared to measurements in the unsedated horse. Mismatch between ventilation and perfusion in the lungs was evident, but no increase in intrapulmonary shunt could be detected. Respiratory rate and minute ventilation did not change. Heart rate and cardiac output decreased, while pulmonary and systemic blood pressure and vascular resistance increased. Addition of butorphanol resulted in a significant decrease in ventilation and increase in PaCO2. Alveolar-arterial oxygen content difference P(A-aO2 remained impaired after butorphanol administration, the VA/Q distribution improved as the decreased ventilation and persistent low blood flow was well matched. Also after subsequent butorphanol no increase in intrapulmonary shunt was evident. Conclusion The results of the present study suggest that both pulmonary and cardiovascular factors contribute to the impaired pulmonary gas exchange during detomidine and butorphanol sedation in the horse.

  17. DETOMIDINE AND BUTORPHANOL FOR STANDING SEDATION IN A RANGE OF ZOO-KEPT UNGULATE SPECIES.

    Science.gov (United States)

    Bouts, Tim; Dodds, Joanne; Berry, Karla; Arif, Abdi; Taylor, Polly; Routh, Andrew; Gasthuys, Frank

    2017-09-01

    General anesthesia poses risks for larger zoo species, like cardiorespiratory depression, myopathy, and hyperthermia. In ruminants, ruminal bloat and regurgitation of rumen contents with potential aspiration pneumonia are added risks. Thus, the use of sedation to perform minor procedures is justified in zoo animals. A combination of detomidine and butorphanol has been routinely used in domestic animals. This drug combination, administered by remote intramuscular injection, can also be applied for standing sedation in a range of zoo animals, allowing a number of minor procedures. The combination was successfully administered in five species of nondomesticated equids (Przewalski horse [ Equus ferus przewalskii; n = 1], onager [ Equus hemionus onager; n = 4], kiang [ Equus kiang ; n = 3], Grevy's zebra [ Equus grevyi ; n = 4], and Somali wild ass [ Equus africanus somaliensis; n = 7]), with a mean dose range of 0.10-0.17 mg/kg detomidine and 0.07-0.13 mg/kg butorphanol; the white ( Ceratotherium simum simum; n = 12) and greater one-horned rhinoceros ( Rhinoceros unicornis ; n = 4), with a mean dose of 0.015 mg/kg of both detomidine and butorphanol; and Asiatic elephant bulls ( Elephas maximus ; n = 2), with a mean dose of 0.018 mg/kg of both detomidine and butorphanol. In addition, the combination was successfully used for standing sedation in six species of artiodactylids: giraffe ( Giraffa camelopardalis reticulata; n = 3), western bongo ( Tragelaphus eurycerus eurycerus; n = 2), wisent ( Bison bonasus ; n = 5), yak ( Bos grunniens ; n = 1), water buffalo ( Bubalus bubalis ; n = 4) and Bactrian camel ( Camelus bactrianus ; n = 5). The mean dose range for artiodactylid species except bongo was 0.04-0.06 mg/kg detomidine and 0.03-0.06 mg/kg butorphanol. The dose in bongo, 0.15-0.20 mg/kg detomidine and 0.13-0.15 mg/kg butorphanol, was considerably higher. Times to first effect, approach, and recovery after antidote were short. The use of detomidine and butorphanol has

  18. Electroencephalographic and electromyographic changes during the use of detomidine and detomidine-butorphanol combination in standing horses.

    Science.gov (United States)

    Kruluc, P; Nemec, Alenka

    2006-03-01

    Clinically, the use of detomidine and butorphanol is suitable for sedation and deepening of analgosedation. The aim of our study was to establish the influence of detomidine used alone and a butorphanol-detomidine combination on brain activity and to evaluate and compare brain responses (using electroencephalography, EEG) by recording SEF90 (spectral edge frequency 90%), individual brain wave fractions (beta, alpha, theta and delta) and electromyographic (EMG) changes in the left temporal muscle in standing horses. Ten clinically healthy cold-blooded horses were divided into two groups of five animals each. Group I received detomidine and Group II received detomidine followed by butorphanol 10 min later. SEF90, individual brain wave fractions and EMG were recorded with a pEEG (processed EEG) monitor using computerised processed electroencephalography and electromyography. The present study found that detomidine alone and the detomidine-butorphanol combination significantly reduced SEF90 and EMG, and they caused changes in individual brain wave fractions during sedation and particularly during analgosedation. The EMG results showed that the detomidine-butorphanol combination provided greater and longer muscle relaxation. Our EEG and EMG results confirmed that the detomidine-butorphanol combination is safer and more appropriate for painless and non-painless procedures on standing horses compared to detomidine alone.

  19. Cardiorespiratory and anesthetic effects of combined alfaxalone, butorphanol, and medetomidine in Thoroughbred horses.

    Science.gov (United States)

    Ohmura, Hajime; Okano, Atsushi; Mukai, Kazutaka; Fukuda, Kentaro; Takahashi, Toshiyuki

    2016-01-01

    This study evaluated induction of anesthesia and cardiorespiratory and anesthetic effects during maintained anesthesia with the combination of alfaxalone, medetomidine, and butorphanol. Alfaxalone (1.0 mg/kg) was administered to induce anesthesia after premedication with medetomidine (7.0 µg/kg), butorphanol (25 µg/kg), and midazolam (50 µg/kg) in six Thoroughbred horses. Intravenous general anesthesia was maintained with alfaxalone (2.0 mg/(kg∙hr)), medetomidine (5.0 µg/(kg∙hr)), and butorphanol (30 µg/(kg∙hr)) for 60 min. Electrical stimulation of the upper oral mucosa was used to assess anesthetic depth at 10 min intervals during anesthesia. Heart rate (HR), respiratory rate (RR), and mean arterial pressure (MAP) were measured. All horses became recumbent within 1 min after alfaxalone administration. Induction scores were 5 (best) in five horses and 4 in one horse. During the 60-min anesthesia, average HR, RR, and MAP were 35.8 ± 2.6 beat/min, 4.7 ± 0.6 breath/min, and 129 ± 3 mmHg, respectively. No horse moved with electrical stimulation; however, two horses experienced apnea (no respiration for 1 to 3 min). Recovery scores were 5 (best) in two horses and 3 in four horses. These results suggest that alfaxalone is effective for induction and maintenance of anesthesia and analgesia when combined with butorphanol and medetomidine for 60 min in Thoroughbreds. However, respiratory depression might require support.

  20. Evaluation of an oral transmucosal administration of dexmedetomidine-butorphanol and dexmedetomidine-methadone in dogs.

    Directory of Open Access Journals (Sweden)

    Daniela Gioeni

    2017-05-01

    Full Text Available Oral transmucosal (OTM delivery is a simple and painless method for sedative administration in veterinary medicine and allows a rapid absorption without a first-pass metabolism by the liver (Porters et al. 2014.. OTM is particularly useful in aggressive animals (Santos et al. 2010. The aim of this study is to evaluate the efficacy of the OTM route in dogs for sedative administration in comparison with intramuscular (IM injection. 24 mix-bread dogs undergoing soft tissue surgery or diagnostic procedures were randomly divided in 4 groups (n = 6: two groups received OTM administration of dexmedetomidine (10 µg/kg-1 together with butorphanol (0.2 mg/kg-1, BTF-OTM group or methadone (0.2mg/kg-1, MTD-OTM group; two groups received intramuscular (IM administration of dexmedetomidine (5 µg/kg-1 together with butorphanol (0.2 m/kg-1, BTF-IM group or methadone (0.2 mg/kg-1, MTD-IM. Heart rate (HR, respiratory rate (RR, sedation score (Gruney et al. 2009 and side effects were recorded 10 (T10, 20 (T20 and 30 (T30 minutes after premedication. Induction was performed at T30 with titrate-to-effect propofol administration and the dosage required was recorded. At each time point BTF-IM group showed a statistically lower HR compared to BTF-OTM; RR was statistically lower at T10 in MTD-OTM group (21.33 ± 8.64 pm compared to BTF-OTM (46.16 ± 17.98; Dogs in group MTD-IM reached a higher sedation scores at each time point compared to MTD-OTM. The induction dose of propofol appears comparable among groups. Marked vasoconstriction was observed after OTM administration, as probably related to α2-agonists use. Emesis and sialorrhea occurred in two subjects of MTD-OTM group while only one dog presented sialorrhea in BTF-OTM group. In conclusion, OTM administration appears effective and easy to perform; it takes a longer time to achieve a good sedation score, probably related to a gradual absorption of drugs that also leads to a more gradual hemodynamic effects.

  1. Comparison of the sedative effects of nalbuphine and butorphanol, alone or in combination with acepromazine in dogs.

    Science.gov (United States)

    Gomes, Viviane H; Oliveira, Renato Ls; Marques, Juliana Lr; Coelho, Cassia Mm; Silva, Marta Fa

    2018-01-01

    To compare sedation and effects on heart rate (HR), mean arterial pressure (MAP) and respiratory rate (f R ) of nalbuphine and butorphanol, alone or combined with acepromazine in dogs. Prospective, randomized experimental trial. Eight healthy Beagle dogs, aged (mean ± standard deviation) 3.4 ± 0.5 years and weighing 11.0 ± 1.3 kg. Each dog was treated four times: physiological saline (1 mL) combined with nalbuphine (0.5 mg kg -1 ; SAL-NAL) or butorphanol (0.15 mg kg -1 ; SAL-BUT), and acepromazine (0.05 mg kg -1 ) combined with nalbuphine (0.5 mg kg -1 ; ACP-NAL) or butorphanol (0.15 mg kg -1 ; ACP-BUT), intravenously (IV). The degree of sedation, assessed by a numeric descriptive scale (NDS) and simple numerical scale (SNS), HR, MAP, f R and rectal temperature (RT), were recorded before and 20 minutes after administration of saline or acepromazine, then 15, 30, 60, 90 and 120 minutes after nalbuphine or butorphanol. Values were compared with baseline and among treatments. Mild sedation was recorded for SAL-NAL and SAL-BUT, and moderate sedation for ACP-NAL and ACP-BUT. NDS and SNS scores were higher for SAL-BUT and ACP-BUT at some time points when compared with SAL-NAL and ACP-NAL, respectively (p 0.5 °C) compared with SAL-NAL (38.0 ± 0.5 °C) at 60-120 minutes (p < 0.05). Butorphanol promoted a higher sedative effect than nalbuphine when alone and combined with acepromazine. IV administration of nalbuphine or butorphanol, with or without acepromazine, at the doses studied, resulted in minimal decreases in MAP, HR, f R and RT. Copyright © 2017. Published by Elsevier Ltd.

  2. Compatibility of butorphanol and droperidol in 0.9% sodium chloride injection.

    Science.gov (United States)

    Chen, Fu-Chao; Fang, Bao-Xia; Li, Peng; Yang, Jin-Guo; Zhou, Ben-Hong

    2013-03-15

    The compatibility and stability of butorphanol tartrate and droperidol in polyvinyl chloride (PVC) bags and glass bottles stored at 4°C and 25°C for up to 15 days were studied. Admixtures were assessed initially and for 15 days after preparation in PVC bags and glass bottles using 0.9% sodium chloride injection as a diluent and stored at 4°C and 25°C. The initial drug concentrations were 0.08 mg/mL for butorphanol tartrate and 0.05 mg/mL for droperidol. Samples were withdrawn from each container immediately after preparation and at predetermined intervals (2, 4, 8, 24, 48, 72, 120, 168, 240, and 360 hours after preparation). The solutions were visually inspected for precipitation, cloudiness, and discoloration at each sampling interval. Drug concentrations were determined using a validated high-pressure liquid chromatography method. After 15 days of storage, all formulations tested retained >98% of the initial concentrations of both drugs. The drug mixtures were clear in appearance, and no color change or precipitation was observed. Throughout this period, pH values remained stable. Admixtures of butorphanol tartrate 0.08 mg/mL and droperidol 0.05 mg/mL in 0.9% sodium chloride injection were stable for at least 360 hours when stored in PVC bags or glass bottles at 4°C and 25°C and protected from light.

  3. Physicochemical stability of ternary admixtures of butorphanol, ketamine, and droperidol in polyolefin bags for patient-controlled analgesia use

    Directory of Open Access Journals (Sweden)

    Fang BX

    2016-11-01

    Full Text Available Baoxia Fang,1 Linhai Wang,2 Junfeng Gu,3 Fuchao Chen,1 Xiao-ya Shi1 1Department of Pharmacy, Dongfeng Hospital, 2Department of Pharmacy, 3Department of Anesthesiology, Renmin Hospital, Hubei University of Medicine, Hubei, People’s Republic of China Background: Delivery of drug admixtures by intravenous patient-controlled analgesia is a common practice for the management of postoperative pain; however, analytical confirmation of the compatibility and stability of butorphanol tartrate, ketamine hydrochloride, and droperidol combined in ternary admixtures is not available.Methods: Butorphanol tartrate, ketamine hydrochloride, and droperidol have been examined for compatibility and stability when combined with 0.9% sodium chloride injection stored at 4°C and 25°C with light protection for a total of 14 days. Concentrations were 0.067 mg/mL, 1.33 mg/mL, and 0.033 mg/mL for butorphanol tartrate, ketamine hydrochloride, and droperidol, respectively. Drug concentrations were determined using high-performance liquid chromatographic analysis.Results: All three drugs were very stable (>97% at 4°C and 25°C for 14 days. The ternary admixtures were initially clear and colorless throughout the observation period, and the pH value did not change significantly.Conclusion: The results confirm that the ternary admixture of butorphanol tartrate 0.067 mg/mL, ketamine hydrochloride 1.33 mg/mL, and droperidol 0.033 mg/mL in 0.9% sodium chloride injection were stable for 14 days when stored in polyolefin bags at 4°C and 25°C and protected from light. Keywords: analgesia, patient-controlled analgesia, drug stability, butorphanol, ketamine, droperidol, HPLC

  4. Assessments of thermal antinociceptive effects of butorphanol and human observer effect on quantitative evaluation of analgesia in green iguanas (Iguana iguana).

    Science.gov (United States)

    Fleming, Gregory J; Robertson, Sheilah A

    2012-10-01

    To determine whether butorphanol induces thermal antinociception in green iguanas (Iguana iguana) and assess the human observer effect on quantitative evaluation of butorphanol-induced analgesia. 6 juvenile green iguanas. Skin temperature was recorded, and then a direct increasing heat stimulus was applied to the lateral aspect of the tail base of each iguana. Temperature of the stimulus at which the iguana responded (thermal threshold) was measured before and for 8 hours after IM injection of either butorphanol tartrate (1.0 mg/kg) or an equal volume of saline (0.9% NaCl) solution. Six experiments (butorphanol [n = 3] and saline solution [3]) were conducted with the observer in the iguanas' field of vision, and 11 experiments (butorphanol [n = 5] and saline solution [6]) were conducted with the observer hidden from their view. The interval between treatments or tests was ≥ 1 month. Temperature difference between thermal threshold and skin temperature when iguanas were administered saline solution did not differ from temperature difference when iguanas were administered butorphanol regardless of whether the observer was or was not visible. Temperature difference between thermal threshold and skin temperature was significantly lower when iguanas were tested without the observer in visual range, compared with the findings obtained when iguanas were tested with an observer in view, at multiple times after either treatment. Intramuscular administration of 1.0 mg of butorphanol/kg did not induce thermal antinociception in juvenile green iguanas. The visible presence of an observer appeared to influence the results of noxious stimulus testing in this reptile species.

  5. Compatibility of butorphanol with granisetron in 0.9% sodium chloride injection packaged in glass bottles or polyolefin bags.

    Science.gov (United States)

    Chen, Fu-Chao; Xiong, Hui; Liu, Hui-Min; Fang, Bao-Xia; Li, Peng

    2015-08-15

    The stability of admixtures containing butorphanol and granisetron in polyolefin bags and glass bottles stored at 4 and 25 °C was studied. Commercial solutions of butorphanol tartrate and granisetron hydrochloride were combined and further diluted with 0.9% sodium chloride injection to final concentrations of butorphanol tartrate 0.08 mg/mL and granisetron 0.03 or 0.06 mg/mL; the resulting mixtures were packaged in polyolefin bags and glass bottles. The admixtures were assessed for periods of up to 48 hours after storage at 25 °C without protection from room light and up to 14 days at 4 °C with protection from room light. The chemical stability of the admixtures was evaluated by a validated high-performance liquid chromatography (HPLC) method and by measurement of pH values. Solution appearance and color were assessed by observing the samples against room light and dark backgrounds. HPLC analysis demonstrated that the percentages of the initial concentrations of butorphanol and granisetron in the various solutions remained above 97% during the testing period. No changes in color or turbidity were observed in any of the prepared solutions. Throughout this period, pH values remained stable. Admixtures of butorphanol tartrate 0.08 mg/mL and granisetron 0.03 or 0.06 mg/mL in 0.9% sodium chloride injection in polyolefin bags or glass bottles remained stable for 48 hours when stored at 25 °C exposed to room light and for 14 days when stored at 4 °C protected from room light. Copyright © 2015 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  6. Efeitos eletrocardiográficos do butorfanol em cães anestesiados pelo desfluorano Electrocardiographic effects of butorphanol in desflurane anesthetized dogs

    Directory of Open Access Journals (Sweden)

    Paulo Sérgio Patto dos Santos

    2004-08-01

    Full Text Available Objetivou-se com este experimento avaliar as possíveis alterações eletrocardiográficas decorrentes do uso do butorfanol em cães, durante anestesia geral inalatória com desfluorano. Para tal, foram utilizados vinte cães adultos, clinicamente saudáveis, distribuídos em dois grupos (n=10 denominados de GS e GB. Os animais foram induzidos à anestesia com propofol (8,4 ± 0,8mg kg-1, IV intubados com sonda orotraqueal de Magill e submetidos à anestesia inalatória pelo desfluorano (10V%. Decorridos 40 minutos da indução, foi administrado aos animais do GS, por via intramuscular, 0,05mL kg-1 de solução fisiológica a 0,9% (salina, enquanto que no GB, foi aplicado butorfanol na dose de 0,4mg kg-1 pela mesma via e em volume equivalente ao empregado no grupo anterior. As observações das variáveis freqüência cardíaca (FC, duração e amplitude da onda P (Ps e PmV, intervalo entre as ondas P e R (PR, duração do complexo QRS (QRSs, amplitude da onda R (RmV, duração do intervalo entre as ondas Q e T (QT e intervalo entre duas ondas R (RR tiveram início imediatamente antes da aplicação do opióide ou salina (M0. Novas mensurações foram realizadas 15 minutos após a administração do butorfanol ou salina (M15 e as demais colheitas foram realizadas à intervalos de 15 minutos, por um período de 60 minutos (M30, M45, M60 e M75. Os dados numéricos destas variáveis foram submetidos à Análise de Perfil (pThe aim of this work was to evaluate the alterations due to butorphanol administration in desflurane anesthetized dogs over heart rate (HR and electrocardiography (ECG. Twenty adult dogs, males and females, clinically healthy were randomly distributed in two groups of ten animals each (GS and GB. General anesthesia was induced by intravenous administration of propofol (8.4± 0.8mg kg-1 and immediately, the dogs were intubated and submitted to inhalatory anesthesia with desflurane (10V%. After 40 minutes of induction, animals from

  7. Pharmacokinetics of butorphanol tartrate in a long-acting poloxamer 407 gel formulation administered to Hispaniolan Amazon parrots (Amazona ventralis).

    Science.gov (United States)

    Laniesse, Delphine; Guzman, David Sanchez-Migallon; Knych, Heather K; Smith, Dale A; Mosley, Cornelia; Paul-Murphy, Joanne R; Beaufrère, Hugues

    2017-06-01

    OBJECTIVE To determine pharmacokinetics of butorphanol tartrate incorporated into poloxamer 407 (P407) after SC administration to Hispaniolan Amazon parrots (Amazona ventralis). ANIMALS 11 adult Hispaniolan Amazon parrots (6 males and 5 females; 11 to 27 years old). PROCEDURES A sterile formulation of butorphanol in P407 (But-P407) 25% (percentage determined as [weight of P407/weight of diluent] × 100]) was created (8.3 mg/mL). Five preliminary experiments (2 birds/experiment) were performed to determine the ideal dose for this species. The formulation then was administered (12.5 mg/kg, SC) to 8 birds. Blood samples were collected before (time 0) and 0.08, 0.5, 1, 2, 4, 8, 12, and 24 hours after drug administration. Some birds were used more than once, with a washout period of ≥ 3 months between subsequent treatments. Butorphanol concentrations were quantitated by use of liquid chromatography-tandem mass spectrometry. Pharmacokinetic analysis was performed by use of noncompartmental analysis. RESULTS Maximal plasma butorphanol concentration was reached at 1.31 hours. Plasma concentrations of butorphanol remained > 100 ng/mL for > 3 hours (all birds) or > 4 hours (5/8 birds) but Amazon parrots, and absorption followed a pharmacokinetic profile compatible with a sustained-release drug. A dose of 12.5 mg/kg, SC, would theoretically provide analgesia for 4 to 8 hours. No adverse effects were detected. Studies on the pharmacodynamics of this formulation are necessary to confirm the degree and duration of analgesia.

  8. Clinical evaluation of detomidine-butorphanol-guaifenesin-ketamine as short term TIVA in Spiti ponies.

    Science.gov (United States)

    Thakur, B P S; Sharma, S K; Sharma, Arvind; Kumar, Adarsh

    2011-06-01

    Veterinarians working under remote field conditions are routinely presented with variety of surgical interventions in equines like castrations, management of wound, traumatic and congenital hernias and musculoskeletal disorders thus necessitating the use of general anaesthesia for management of these conditions. The present study was carried out to evaluate and recommend the suitable short term anaesthetic technique for Spiti ponies under field conditions. Seven clinically healthy male Spiti ponies presented for castration were evaluated for short term Total Intravenous Anaesthesia (TIVA) using detomidine (0.02 mg kg(-1)), butorphanol (0.01 mg kg(-1)), 5% guaifenesin (20 mg kg(-1)) and ketamine (2.0 mg kg(-1)). The studies conducted were open label trials and all the animals received same treatment. After proper tetanus prophylaxis and preanesthetic fasting, detomidine was administered intravenously. Subsequently at head down position the animals received butorphanol intravenously. Thereafter, guaifenesin was administered intravenously. As soon as the signs of ataxia developed, the induction of surgical anaesthesia was achieved by intravenous administration of ketamine hydrochloride. The onset of sedation was observed in 2.43 +/- 0.53 min following detomidine administration and the animals were ataxic in 1.43 +/- 0.43 min after butorphanol and guaifenesin administration when ketamine was injected. The ponies were in surgical plane of anaesthesia within 2.28 +/- 0.42 min following ketamine administration. During recovery the limb/head movement and sternal recumbency were attained in 18.71 +/- 1.98 and 26.14 +/- 1.62 min, respectively whereas standing ataxia and normal gait were seen at 29.42 +/- 3.21 and 71.14 +/- 4.74 min, respectively. There was excellent to good muscle relaxation. The surgical anaesthesia remained for 22.57 +/- 1.48 min. The recovery was smooth. Moderate to good suppression of palpebral and corneal reflexes were observed immediately after

  9. Effects of preoperative administration of butorphanol or meloxicam on physiologic responses to surgery in ball pythons.

    Science.gov (United States)

    Olesen, Mette G; Bertelsen, Mads F; Perry, Steve F; Wang, Tobias

    2008-12-15

    To characterize physiologic responses of ball pythons (Python regius) following a minor surgical procedure and investigate the effects of 2 commonly used analgesics on this response. 15 healthy ball pythons. Snakes were randomly assigned to receive 1 of 3 treatments: meloxicam (0.3 mg/kg [0.14 mg/lb]; n = 5), butorphanol (5 mg/kg [2.3 mg/lb]; 5), or saline (0.9% NaCl) solution (5) before catheterization of the vertebral artery. Plasma concentrations of catecholamines and cortisol, blood pressure, heart rate, and blood gas values were measured at various times for 72.5 hours after catheterization. The 72.5-hour point was defined as baseline. Heart rate of ball pythons increased significantly during the first hour following surgery. Mean plasma epinephrine concentration increased slightly at 2.5 hours after surgery, whereas mean plasma cortisol concentration increased beginning at 1.5 hours, reaching a maximum at 6.5 hours. Mean blood pressure increased within the first hour but returned to the baseline value at 2.5 hours after surgery. After 24.5 hours, blood pressure, heart rate, and plasma hormone concentrations remained stable at baseline values. There were no significant differences in values for physiologic variables between snakes that received saline solution and those that received meloxicam or butorphanol. Measurement of physiologic variables provides a means of assessing postoperative pain in snakes. Meloxicam and butorphanol at the dosages used did not decrease the physiologic stress response and did not appear to provide analgesic effects in ball pythons.

  10. Analgesic effect of butorphanol and levomethadone in detomidine sedated horses.

    Science.gov (United States)

    Schatzman, U; Armbruster, S; Stucki, F; Busato, A; Kohler, I

    2001-08-01

    The analgesic potency of butorphanol 25 microg/kg bodyweight (BW) and levomethadone 100 microg/kg BW, administered together with detomidine 10 microg/kg BW, was measured in twelve Warmblood horses in a randomized, blinded cross-over study. Detomidine with saline 10 ml 0.9% was used as placebo. The nociceptive threshold was determined using a constant current and a pneumatic pressure model for somatic pair Detomidine alone and in combination with butorphanol or levomethadone caused a significant temporary increase (P detomidine alone to both test methods. No significant difference between butorphanol and levomethadone was registered. It is concluded that the addition of butorphanol or levomethadone to detomidine increases the nociceptive threshold to somatic pain and prolongs the analgesic effect of detomidine in the horse.

  11. Comparison of butorphanol-detomidine versus butorphanol-azaperone for the standing sedation of captive greater one-horned rhinoceroses (Rhinoceros unicornis).

    Science.gov (United States)

    Bapodra, Priya; Cracknell, Jonathan; Wolfe, Barbara A

    2014-03-01

    Three adult and two subadult greater one-horned rhinoceroses (Rhinoceros unicornis) were sedated a total of nine times using two different intramuscular sedative combinations in order to compare the effectiveness of these combinations in inducing consistent standing sedation in this species. The sedation protocols compared were butorphanol tartrate (50-60 mg) and detomidine hydrochloride (20-30 mg; BD) versus butorphanol tartrate (80-120 mg) and azaperone (80-120 mg; BA). Specific doses were adjusted according to age and sex class, and based on previous experience. Parameters compared included time to achieve defined levels of sedation, time to recovery following antagonism, physiological parameters including heart rate, respiratory rate, indirect arterial blood pressure, and venous blood gas values. A hydraulic restraint chute was utilized to mechanically restrain animals during the procedures, and blood collection and ophthalmic examinations were conducted on all animals. Both protocols resulted in standing sedation for > or = 22.3 +/- 2.9 min or until antagonists were administered. The BD protocol resulted in deeper and more consistent sedation, compared to the BA protocol. Naltrexone hydrochloride (250-300 mg) and tolazoline hydrochloride (1,500-2,000 mg) were administered intramuscularly to antagonize protocol BD, whereas naltrexone alone (200-500 mg) was used to antagonize BA. Time to full antagonism, defined as normal mentation and ambulation following administration of antagonists, was prolonged in the BD protocol (132.3 +/- 17.2 min) compared with the BA protocol (7.5 +/- 2.5 min). Venous blood gas analysis did not reveal any significant blood gas deviations during sedation when compared with either conscious equine or white rhinoceros (Ceratotherium simum) venous reference ranges. In summary, both combinations resulted in adequate standing sedation for minimally invasive procedures, although BD resulted in more profound and consistent sedation.

  12. Pharmacokinetics and physiologic effects of intramuscularly administered xylazine hydrochloride-ketamine hydrochloride-butorphanol tartrate alone or in combination with orally administered sodium salicylate on biomarkers of pain in Holstein calves following castration and dehorning.

    Science.gov (United States)

    Baldridge, Sarah L; Coetzee, Johann F; Dritz, Steve S; Reinbold, James B; Gehring, Ronette; Havel, James; Kukanich, Butch

    2011-10-01

    To determine the pharmacokinetic parameters of xylazine, ketamine, and butorphanol (XKB) administered IM and sodium salicylate (SAL) administered PO to calves and to compare drug effects on biomarkers of pain and distress following sham and actual castration and dehorning. 40 Holstein bull calves from 3 farms. Calves weighing 108 to 235 kg (n = 10 calves/group) received one of the following treatments prior to sham (period 1) and actual (period 2) castration and dehorning: saline (0.9% NaCl) solution IM (placebo); SAL administered PO through drinking water at concentrations from 2.5 to 5 mg/mL from 24 hours prior to period 1 to 48 hours after period 2; butorphanol (0.025 mg/kg), xylazine (0.05 mg/kg), and ketamine (0.1 mg/kg) coadministered IM immediately prior to both periods; and a combination of SAL and XKB (SAL+XKB). Plasma drug concentrations, average daily gain (ADG), chute exit velocity, serum cortisol concentrations, and electrodermal activity were evaluated. ADG (days 0 to 13) was significantly greater in the SAL and SAL+XKB groups than in the other 2 groups. Calves receiving XKB had reduced chute exit velocity in both periods. Serum cortisol concentrations increased in all groups from period 1 to period 2. However, XKB attenuated the cortisol response for the first hour after castration and dehorning and oral SAL administration reduced the response from 1 to 6 hours. Administration of XKB decreased electrodermal activity scores in both periods. SAL administered PO through drinking water decreased cortisol concentrations and reduced the decrease in ADG associated with castration and dehorning in calves.

  13. Minimum alveolar concentration of isoflurane in green iguanas and the effect of butorphanol on minimum alveolar concentration.

    Science.gov (United States)

    Mosley, Craig A E; Dyson, Doris; Smith, Dale A

    2003-06-01

    To determine minimum alveolar concentration (MAC) of isoflurane in green iguanas and effects of butorphanol on MAC. Prospective randomized trial. 10 healthy mature iguanas. in each iguana, MAC was measured 3 times: twice after induction of anesthesia with isoflurane and once after induction of anesthesia with isoflurane and IM administration of butorphanol (1 mg/kg [0.45 mg/lb]). A blood sample was collected from the tail vein for blood-gas analysis at the beginning and end of the anesthetic period. The MAC was determined with a standard bracketing technique; an electrical current was used as the supramaximal stimulus. Animals were artificially ventilated with a ventilator set to deliver a tidal volume of 30 mL/kg (14 mL/lb) at a rate of 4 breaths/min. Mean +/- SD MAC values during the 3 trials (2 without and 1 with butorphanol) were 2.0 +/- 0.6, 2.1 +/- 0.6, and 1.7 +/- 0.7%, respectively, which were not significantly different from each other. Heart rate and end-tidal partial pressure of CO2 were also not significantly different among the 3 trials. Mean +/- SD heart rate was 48 +/- 10 beats/min; mean end-tidal partial pressure of CO2 was 22 +/- 10 mm Hg. There were no significant differences in blood-gas values for samples obtained at the beginning versus the end of the anesthetic period. Results suggest that the MAC of isoflurane in green iguanas is 2.1% and that butorphanol does not have any significant isoflurane-sparing effects.

  14. The effects of xylazine, detomidine, acepromazine and butorphanol on equine solid phase gastric emptying rate.

    Science.gov (United States)

    Sutton, D G M; Preston, T; Christley, R M; Cohen, N D; Love, S; Roussel, A J

    2002-07-01

    The aim of this study was to measure the effects of specific commonly used sedative protocols on equine solid phase gastric emptying rate, using the 13C-octanoic acid breath test (13C-OABT). The gastric emptying of a standard 13C-labelled test meal was measured once weekly in 8 mature horses over two 4 week treatment periods. Each horse acted as its own control. In treatment Period 1, saline (2 ml i.v.), xylazine (0.5 mg/kg i.v.), detomidine (0.01 mg/kg i.v.) or detomidine/butorphanol combination (0.01/0.02 mg/kg i.v.) was administered in randomised order after ingestion of the test meal. During treatment Period 2, test meal consumption was followed by saline, xylazine (1.0 mg/kg i.v.), or detomidine (0.03 mg/kg i.v.) administration, or preceded by acepromazine (0.05 mg/kg i.m.) in randomised order. The 13C:12C ratio of sequential expiratory breath samples was determined by isotope ratio mass spectrometry, and used to measure the gastric half-emptying time, t 1/2, and duration of the lag phase, t lag, for each of the 64 tests. In treatment Period 1, detomidine/butorphanol prolonged both t 1/2 and t lag with respect to xylazine 0.5 mg/kg and the saline control (P detomidine 0.03 mg/kg delayed each parameter with respect to saline, acepromazine and xylazine 1.0 mg/kg (P detomidine on gastric emptying rate was dose related (P<0.05). These findings may have clinical significance for case selection when these agents are used for purposes of sedation and/or analgesia.

  15. Butorphanol, azaperone, and medetomidine anesthesia in free-ranging white-tailed deer (Odocoileus virginianus) using radiotransmitter darts.

    Science.gov (United States)

    Siegal-Willott, Jessica; Citino, Scott B; Wade, Scotty; Elder, Laura; Hayek, Lee-Ann C; Lance, William R

    2009-04-01

    Fourteen free-ranging white-tailed deer (Odocoileus virginianus) were successfully anesthetized for a total of 15 anesthetic events using a combination of butorphanol (mean+/-SD, 0.58+/-0.1 mg/kg), azaperone (0.37+/-0.06 mg/kg), and medetomidine (0.19+/-0.03 mg/kg) (BAM) administered by radiotelemetry darts from hunting blinds between November 2006 and May 2007. Mean time to locate deer (mean+/-SD, 17. 3+/-7 min), to recumbency (21.4+/-5 min), to initiation of data acquisition (27.5+/-8 min), total down time (37+/-6 min), and average distance run (161+/-82 m) were recorded. Physiologic monitoring was done every 5 min for a total of 20 min. Arterial blood gases were collected every 10 min. Mild to moderate hypoxemia and mildly depressed ventilation occurred in some animals. Muscle relaxation and plane of anesthesia were adequate for completion of all procedures; two deer were administered intravenous butorphanol supplementation to achieve light anesthesia (mean+/-SD, 0.19 mg/kg; 0.12 mg/kg). Recovery following intramuscular administration of naltrexone (1.34+/-0.42 mg/kg; 2x butorphanol dose) and atipamezole (0.93+/-0.14 mg/kg; 5x medetomidine dose) was rapid, smooth, and complete. Mean+/-SD recovery time was 4.5+/-1.5 min. Overall efficacy of the Pneu-Dart radiotelemetry system was 65%. Negative attributes of this protocol included long induction time and dart failure. No known mortalities occurred as a result of the study. This drug combination provided safe, reliable, short-term anesthesia of free-ranging white-tailed deer. Further evaluation for use in field procedures in other cervids is warranted.

  16. Analgesia after feline ovariohysterectomy under midazolam-medetomidine-ketamine anaesthesia with buprenorphine or butorphanol, and carprofen or meloxicam: a prospective, randomised clinical trial.

    Science.gov (United States)

    Polson, Sally; Taylor, Polly M; Yates, David

    2012-08-01

    One hundred female cats undergoing routine ovariohysterectomy under midazolam-medetomidine-ketamine anaesthesia were included in a blinded, randomised, prospective clinical study to compare postoperative analgesia produced by four analgesic drug combinations given preoperatively (n = 25 per group). A secondary aim was to assess the effects in kittens and pregnant animals. Buprenorphine 180 µg/m(2) or butorphanol 6 mg/m(2) were given with either carprofen 4 mg/kg (groups BUPC and BUTC, respectively) or meloxicam 0.3 mg/kg (groups BUPM or BUTM, respectively). Medetomidine was not antagonised. A simple, descriptive scale (SDS; 0-4), a dynamic and interactive visual analogue scale (DIVAS; 0-100 mm) and mechanical nociceptive thresholds (MT; 2.5-mm diameter probe) were used to evaluate postoperative pain. All pain scores were low (DIVAS 10 N) and there were no significant differences between the groups. It was concluded that all protocols provided adequate analgesia and when used with midazolam-medetomidine-ketamine are effective for routine feline ovariohysterectomy.

  17. Comparison of azaperone-detomidine-butorphanol-ketamine and azaperone-tiletamine-zolazepam for anaesthesia in piglets.

    Science.gov (United States)

    Heinonen, Mari L; Raekallio, Marja R; Oliviero, Claudio; Ahokas, Sanna; Peltoniemi, Olli A T

    2009-03-01

    To investigate a combination of azaperone, detomidine, butorphanol and ketamine (DBK) in pigs and to compare it with the combination of azaperone, tiletamine and zolazepam (TZ). Prospective, randomized, blinded, cross-over study. Twelve clinically healthy crossbred pigs aged about 2 months and weighing 16-25 kg. Pigs were pre-medicated with azaperone (4 mg kg(-1)). Ten minutes later anaesthesia was induced with intramuscular DBK (detomidine 0.08 mg kg(-1), butorphanol 0.2 mg kg(-1), ketamine 10 mg kg(-1)) or TZ (tiletamine and zolazepam 5 mg kg(-1)). The pigs were positioned in dorsal recumbency. Heart and respiratory rates, posture, anaesthesia score, PaO(2), PaCO(2), pH and bicarbonate concentration were measured. t-test was used to compare the areas under time-anaesthesia index curve (AUC(anindex)) between treatments. Data concerning heart and respiratory rates, PaO(2), PaCO(2) and anaesthesia score were analysed with anova for repeated measurements. Wilcoxon signed rank test was used for the data concerning the duration of sedation and anaesthesia. The sedation, analgesia and anaesthesia lasted longer after DBK than TZ. The AUC(anscore) were 863 +/- 423 and 452 +/- 274 for DBK and TZ, respectively (p = 0.002). The duration of surgical anaesthesia lasted a median of 35 minutes (0-105 minutes) after DBK and a median of 15 minutes (0-35 minutes) after TZ (p = 0.05). Four pigs after DBK and six after TZ did not achieve the plane of surgical anaesthesia. The heart rate was lower after DBK than after TZ. Both treatments had similar effects on the other parameters measured. At the doses used DBK was more effective than TZ for anaesthesia in pigs under field conditions. The combinations can be used for sedation and minor field surgery in pigs. The doses and drugs chosen were insufficient to produce a reliable surgical plane of anaesthesia in these young pigs.

  18. Effect of Butorphanol on Anaesthesia Induction by Isoflurane in the Green Iguana (Iguana iguana

    Directory of Open Access Journals (Sweden)

    Š. Trnková

    2008-01-01

    Full Text Available A total of 10 clinically healthy green iguanas (5 males and 5 females, body weight ranging from 1 350 to 2 770 g were given butorphanol by intramuscular injection following 24 h fasting. Inhalation anaesthesia was administered by mask (5% isoflurane with oxygen, 1.0 l/min, once reactions to external stimuli had decreased (15.45 ± 1.54 min later. Tracheal intubation was performed as soon as the iguanas exhibited complete tolerance to mechanical stimuli. A second study was performed 4 weeks later using the same green iguanas with no pre-medication. Marked individual reactions to masking were observed during both experiments. Some iguanas exhibited breath holding which prolonged anaesthetic induction. Physical stimulation was used in these cases in order to stimulate spontaneous breathing. The mean anaesthetic induction time was similar in both groups of green iguanas (4.34 ± 0.47 and 4.93 ± 0.88 min. There was also a comparable interval from masking to safe tracheal intubation in both experimental groups (15.21 ± 4.26 and 14.31 ± 1.39 min. In view of the results, pre-medication with butorphanol cannot be considered an effective method of anaesthetic induction in green iguanas.

  19. Analgesic effects of carprofen and liposome-encapsulated butorphanol tartrate in Hispaniolan parrots (Amazona ventralis) with experimentally induced arthritis.

    Science.gov (United States)

    Paul-Murphy, Joanne R; Sladky, Kurt K; Krugner-Higby, Lisa A; Stading, Ben R; Klauer, Julia M; Keuler, Nicholas S; Brown, Carolyn S; Heath, Timothy D

    2009-10-01

    To evaluate the microcrystalline sodium urate (MSU) method for inducing arthritis in parrots and to compare the analgesic efficacy of long-acting liposome-encapsulated butorphanol (LEBT), carprofen, or a combination of both. 20 Hispaniolan parrots. MSU was injected into a tibiotarsal-tarsometatarsal (intertarsal) joint to induce arthritis (time 0). Four treatments were compared (LEBT [15 mg/kg, SC] administered once at time 0; injections of carprofen [3 mg/kg, IM, q 12 h] starting at time 0; administration of LEBT plus carprofen; and a control treatment of saline [0.9% NaCl] solution). Weight load testing and behavioral scoring were conducted at 0, 2, 6, 26, and 30 hours. Injection of MSU into the intertarsal joint induced arthritis, which resolved within 30 hours. Treatment with LEBT or LEBT plus carprofen resulted in significantly greater weight-bearing load on the limb with induced arthritis, compared with the control treatment. Treatment with carprofen alone caused a slight but nonsignificant improvement in weight-bearing load on the arthritic limb, compared with the control treatment. Behaviors associated with motor activity and weight bearing differed between the control and analgesic treatments. Butorphanol was an effective treatment for pain associated with arthritis, but carprofen administered every 12 hours was insufficient. Injection of MSU to induce arthritis in a single joint was a good method for evaluating tonic pain in parrots, and measurement of the weight-bearing load was accurate for assessment of arthritic pain; however, behavioral changes associated with pain were subtle.

  20. Evaluation of BAM (butorphanol-azaperone-medetomidine) in captive African lion (Panthera leo) immobilization.

    Science.gov (United States)

    Semjonov, Aleksandr; Andrianov, Vladimir; Raath, Jacobus P; Orro, Toomas; Venter, Derik; Laubscher, Liesel; Pfitzer, Silke

    2017-07-01

    The combination of butorphanol, azaperone and medetomidine (BAM) with subsequent antagonism by naltrexone-yohimbine or naltrexone-atipamezole was evaluated for reversible immobilization of captive African lions (Panthea leo). Prospective, clinical trial. Twenty lions, 11 males and nine females, weighing 38-284 kg were immobilized in South Africa. The BAM volume dose rate administered was 0.005-0.008 mL kg -1 (0.6 mL 100 kg -1 ). Physiologic variables were recorded every 5 minutes. Four arterial blood samples were collected from all animals at 20, 30, 40 and 50 minutes after immobilization for analysis of blood-gases and acid-base status. The actual doses administered were as follows: butorphanol, 0.18±0.03 mg kg -1 ; azaperone, 0.07±0.01 mg kg -1 ; and medetomidine, 0.07±0.01 mg kg -1 . The inductions were calm and smooth, and induction time ranged from 4 to 10 minutes (7±2 minutes). The amount of time needed to work with each lion was 70 minutes, and no additional drug doses were needed. Heart rate (40±8 beats minute -1 ) and respiratory frequency (15±4 breaths minute -1 ) were stable throughout immobilization. The mean arterial blood pressure of all animals was stable but elevated (142±16 mmHg). The rectal temperature slightly increased over time but remained within acceptable range. The recovery time was significantly shorter when using naltrexone and atipamezole (9±1 minutes) compared to using naltrexone and yohimbine (22±7 minutes). The BAM combination proved to be reliable for general veterinary anaesthesia in lions. During anaesthesia, minor veterinary procedures such a blood collection, intubation, vaccination and collaring could safely be performed with no additional dosing required. Copyright © 2017 Association of Veterinary Anaesthetists and American College of Veterinary Anesthesia and Analgesia. Published by Elsevier Ltd. All rights reserved.

  1. Physico-chemical stability of butorphanol-tramadol and butorphanol-fentanyl patient-controlled analgesia infusion solutions over 168 hours.

    Science.gov (United States)

    Chen, Fuchao; Fang, Baoxia; Li, Peng; Zhu, Xuesong; Zhou, Benhong

    2014-08-01

    This study was to investigate the physical and chemical compatibility of butorphanol with tramadol or fentanyl in 0.9% sodium chloride injections for patient controlled analgesia administration. The solutions were prepared in polyvinyl chloride (PVC) infusion bags and stored without protected from light exposure at room temperature (25 degrees C) or refrigerated (4 degrees C). Over a period of 168 hours, stabilities were determined by visual inspection, pH measurement, and high-pressure liquid chromatography (HPLC) assay of drug concentrations. At both temperatures, admixtures of butorphanol-tramadol and butorphanol-fentanyl were clear in appearance, and no color change or precipitation was observed during the study period. The maximum losses obtained were lower than 5% for the three drugs after 168 hours of storage. The results indicate that, at ambient or refrigerated storage conditions, the drug mixtures of butorphanol-tramadol and butorphanol-fentanyl in 0.9% sodium chloride injections were physically and chemically stable for at least 168 hours when stored in PVC syringes.

  2. MRI manifestations of thymus in myasthenia gravis (MG) patients in various age groups

    International Nuclear Information System (INIS)

    Wang Ying; Peng Xi; Li Zhizhao; Jiang Kuiming; Song Ting; Dong Tianfa; Xiao Youcheng

    2003-01-01

    Objective: To study MRI findings of the thymus in patients with myasthenia gravis (MG) in different age groups and to analyze the relationship between the morphological changes of thymus and the MG. Methods: In total 90 patients with MG (male: female=43:47) received MR scan and were divided into four groups (group A, B, C and D) by age. Fourteen patients out of 90 received additional enhanced scan. Group A included 33 patients aged under 10 years (m:f=18:15); 27 patients aged 11-25 years were in group B (m:f=12:15); group C had 17 patients aged 26-50 years (m:f=6:11); and in group D there were 13 patients whose ages were over 51 years (m:f=7:6). And 30 Non-MG patients aged 8-75 years were selected as control group, in which the thickness, the fat collection, and glandulous atrophy of thymus was studied on CT. Results: 1) The thymus was unremarkable in 44 cases out of 90 (48.88%). 2) Enlarged thymus was shown in 42 cases out of 90 (46.66%), in which non-nodular enlargement was revealed in 34 cases and nodular enlargement in 8 cases. There were 27 cases with abnormality of thymus out of 33 (81.81%) in group A, 12 cases out of 27 (44.44%) in group B and 3 cases in group C, but no abnormality was found in group D. 3) Only 4/90 patients (4.44%) had thymic mass that respectively seen in one case of group B, two of group C and one of group D. No evidence of the involvement of the adjacent structure was found on MRI in the cases of thymic mass. No thymus enlargement was revealed in control group. Fat collection in thymus was seen in both study groups and control group. Conclusion: Intimate relationship between the abnormality of the thymus gland and MG exists in children and teenagers. While in the middle-aged patients or the seniors, further studies should be made to find out whether there is a correlation

  3. Efeitos cardiorrespiratórios do butorfanol em cães pré-tratados ou não pela levomepromazina Cardiopulmonary effects of butorphanol in dogs treated with levomepromazine

    Directory of Open Access Journals (Sweden)

    Paulo Sérgio Patto dos Santos

    2006-10-01

    Full Text Available Objetivou-se com este experimento avaliar os efeitos do butorfanol precedido ou não pela levomepromazina sobre a freqüência cardíaca (FC, as pressões arteriais sistólica, diastólica e média (PAS, PAD e PAM, respectivamente, a freqüência respiratória (f, a concentração de dióxido de carbono ao final da expiração (ETCO2, a saturação da oxihemoglobina (SpO2, o volume corrente (VC e o volume minuto (VM, em cães. Para tal, foram empregados vinte animais adultos, clinicamente saudáveis, distribuídos igualmente em dois grupos (GC e GL. Ao GC administrou-se solução salina a 0,9% (Controle, no volume de 0,2mL kg-1, pela via intravenosa (IV. Decorridos 15 minutos, administrou-se butorfanol na dose de 0,3mg kg-1 pela mesma via. Aos animais do GL foi adotada a mesma metodologia, porém substituindo-se a solução salina pela levomepromazina na dose de 1mg kg-1. As medidas das variáveis cardiorrespiratórias iniciaram-se imediatamente antes da aplicação dos fármacos (M1. Novas mensurações foram realizadas 15 minutos após a administração da solução salina a 0,9% ou levomepromazina (M2 e 10 minutos após a administração de butorfanol (M3. As demais colheitas foram realizadas a intervalos de 10 minutos, durante 30 minutos (M4, M5 e M6, respectivamente. Os dados numéricos colhidos foram submetidos à Análise de Variância (ANOVA, seguida pelo teste de Tukey (pThis work was aimed at evaluating the effects of the butorphanol in dogs preceded or not buy levomepromazine on heart rate (HR, systolic, diastolic and mean arterial pressure (SAP, DAP and MAP, respectively, respiratory rate (RR, end tidal CO2 (ETCO2, oxyhemoglobin saturation (SpO2, minute volume (MV and tidal volume (TV. Twenty adult animals, clinically health were randomly distributed in two groups with ten animals each one (CG and LG. The first one received intravenous administration (IV of 0.2mL kg-1 of saline solution at 0.9% (control. After 15 minutes, 0.3mg kg-1

  4. Standing sedation in African elephants (Loxodonta africana) using detomidine-butorphanol combinations.

    Science.gov (United States)

    Neiffer, Donald L; Miller, Michele A; Weber, Martha; Stetter, Mark; Fontenot, Deidre K; Robbins, P K; Pye, Geoffrey W

    2005-06-01

    Standing sedation was provided for 14 clinical procedures in three African elephants (Loxodonta africana) managed by combined protected and modified-protected contact and trained through operant conditioning. An initial hand-injection of detomidine hydrochloride and butorphanol tartrate at a ratio of 1:1 on a microg:microg basis was administered intramuscularly, with a dosage range of 50-70 mg (12.9-19.7 microg/kg) for each drug. The initial injection resulted in adequate sedation for initiation and completion of eight procedures, whereas supplemental doses were required for the remaining procedures. The dosage range for the supplemental injections of each drug was 4.0-7.3 microg/kg. Initial effect was noted within 3.0-25 min (mean = 11.6 min, SD +/- 5.9 min), with maximal effect occurring at 25-30 min for those procedures not requiring supplementation. In all but one procedure, this effect was maintained until the end of the procedure, which ranged from 47 to 98 min (mean = 74.7 min, SD +/- 18.8 min). No cardiac or respiratory depression was appreciated. Recovery after administration of reversal agents was rapid and complete, ranging from 2 to 20 min (mean = 9.0 min, SD +/- 7.0 min). On the basis of the authors' experience, recommended dosage ranges for reversal agents would be intravenous yohimbine (73.4-98.5 microg/kg), intravenous naltrexone (48.9-98.5 microg/kg), and intramuscular naltrexone (73.4-98.5 microg/kg). Approximately one-third to one-half of the total naltrexone dose should be administered intravenously. Mild adverse side effects limited to the gastrointestinal tract were observed in association with five procedures including abdominal distention with or without transient anorexia. Administration of reversal agents, encouraging exercise and water consumption, and administration of flunixin meglumine were helpful in the resolution of signs. In addition to gastrointestinal signs, slight ataxia was observed before initiation of surgical stimulation

  5. Evaluation of butorphanol, medetomidine and midazolam as a reversible narcotic combination in free-ranging African lions (Panthera leo).

    Science.gov (United States)

    Wenger, Sandra; Buss, Peter; Joubert, Jenny; Steenkamp, Johan; Shikwambana, Purvance; Hatt, Jean-Michel

    2010-11-01

    To evaluate the effects of the combination butorphanol, medetomidine and midazolam (BMM) and its reversibility in lions. Prospective clinical trial. Thirty free-ranging lions, 10 male and 20 female, weighing 81-210 kg. Lions were immobilised with butorphanol mean 0.31 ± SD 0.034 mg kg(-1), medetomidine 0.052 ± 0.006 mg kg(-1), midazolam 0.21 ± 0.024 mg kg(-1) and hyaluronidase 1250 IU administered intramuscularly with a dart gun. Upon recumbency, physiological parameters and anaesthetic depth were monitored 10-15 minutes after darting (T1) and repeated every 10 minutes for a further 30 minutes (T2, T3, T4). Arterial blood gas analyses were performed at T1 and T4. At the end of the procedure, 45-60 minutes after initial darting, immobilisation was reversed with naltrexone 0.68 ± 0.082 mg kg(-1), atipamezole 0.26 ± 0.031 mg kg(-1), and flumazenil 0.0032 ± 0.0007 mg kg(-1) administered intravenously and subcutaneously. The BMM combination rapidly induced immobilisation and lateral recumbency was reached within 7.25 ± 2.3 minutes. Median induction score [scored 1 (excellent) to 4 (poor)] was 1.4 (range 1-2). Cardio-respiratory parameters were stable. Heart rate varied from 32 to 72 beats per minute, respiratory rate from 14 to 32 breaths minute(-1) and rectal temperature from 36.6 to 40.3 °C. No sudden arousals were observed. Arterial blood gas analyses revealed a mean pH of 7.33, PaCO(2) of 33 mmHg and PaO(2) of 87 mmHg. Mild to moderate hypoxemia was seen in four lions. Recovery was smooth and lions were walking within 4.4 ± 4.25 minutes. Median recovery score [scored 1 (excellent) to 4 (poor)] was 1.3 (range 1-2). The drug combination proved to be effective in immobilising free-ranging healthy lions of both sexes with minimal cardio-respiratory changes. © 2010 The Authors. Veterinary Anaesthesia and Analgesia © 2010 Association of Veterinary Anaesthetists and the American College of Veterinary Anesthesiologists.

  6. Hemogasometria e variáveis cardiopulmonares após administração do butorfanol em cães anestesiados pelo desfluorano sob ventilação espontânea Acid-base and cardiopulmonary effects after butorphanol administration in spontaneously breathing dogs anesthetized by desflurane

    Directory of Open Access Journals (Sweden)

    Paulo Sérgio Patto dos Santos

    2007-04-01

    Full Text Available Este experimento teve por objetivos avaliar as possíveis alterações cardiopulmonares e hemogasométricas decorrentes do uso do butorfanol em cães submetidos à anestesia pelo desfluorano sob ventilação espontânea. Para tal, foram utilizados vinte cães adultos, clinicamente saudáveis, pesando 12±3kg. Os animais foram distribuídos igualmente em dois grupos, GS e GB, e induzidos à anestesia com propofol (8,4±0,8mg kg-1, IV, intubados e submetidos à anestesia inalatória pelo desfluorano (10V%. Decorridos 40 minutos da indução, foi administrado aos animais do GS 0,05mL kg-1 de solução fisiológica a 0,9% (salina, enquanto que, no GB, foi aplicado butorfanol na dose de 0,4mg kg-1, ambos pela via intramuscular. As observações das variáveis freqüências cardíaca (FC e respiratória (f, pressões arteriais sistólica (PAS, diastólica (PAD e média (PAM, pH arterial (pH, pressão parcial de oxigênio no sangue arterial (PaO2, pressão parcial de dióxido de carbono no sangue arterial (PaCO2, déficit de base (DB, bicarbonato (HCO3 e saturação de oxigênio na hemoglobina (SatO2 tiveram início imediatamente antes da aplicação do opióide ou salina (M0. Novas mensurações foram realizadas 15 minutos após a administração do butorfanol ou salina (M15 e as demais colheitas foram realizadas a intervalos de 15 minutos, por um período de 60 minutos (M30, M45, M60 e M75. Os dados numéricos dessas variáveis foram submetidos à Análise de Perfil (PThe cardiopulmonary and acid-base effects of butorphanol in desflurane anesthetized dogs breathing spontaneously were evaluated. Twenty adult healthy, male and female dogs were used. They were separated into two groups of 10 animals each (GS and GB. Anesthesia was induced with propofol (8.4±0.8mg kg-1 IV and maintained with desflurane (10V%. After 40 minutes of induction, the animals from GS received saline solution at 0.9% (0.05mL kg-1 and from GB received butorphanol (0.4mg kg-1

  7. Evaluation of a butorphanol, detomidine, and midazolam combination for immobilization of captive Nile lechwe antelopes (Kobus magaceros).

    Science.gov (United States)

    Laricchiuta, Pietro; De Monte, Valentina; Campolo, Marco; Grano, Fabio; Iarussi, Fabrizio; Crovace, Antonio; Staffieri, Francesco

    2012-07-01

    Field immobilization of captive antelope may be required for medical examination, blood sample collection, and animal identification. The aim of this study was to evaluate the effects of a combination of butorphanol, detomidine, and midazolam (BDM) and its partial reversibility in Nile lechwe antelope (Kobus megaceros). Nine captive lechwes, weighing 28-64 kg, were immobilized, in February 2011, with butorphanol 0.20 ± 0.05 (mean ± SD) mg/kg, detomidine 0.20 ± 0.05 mg/kg, and midazolam 0.31 ± 0.08 mg/kg administered intramuscularly (IM) with a blowpipe. Physiologic parameters and depth of anesthesia were recorded when the animals became recumbent at 19.55 ± 8.36 min after darting (T0) and after 10 (T10), 20 (T20), and 30 (T30) min. An arterial blood sample was collected at T20. At the end of the procedures, immobilization was partially reversed with atipamezole 0.25 mg/kg IM. Quality of induction, immobilization, and recovery was scored. The BDM combination induced immobilization and lateral recumbency in 13.44 ± 5.61 min. Median induction score (scored 1 [excellent] to 4 [poor]) was 1 (range 1-2). Heart rate varied 40-104 beats/min, respiratory rate 16-108 breaths/min, and rectal temperature 36.5-40.3 C. Hyperthermia was observed and rapidly treated in three animals that demonstrated insufficient immobilization after darting. Arterial blood gas analyses revealed a mean pH of 7.43 ± 0.07, partial arterial pressure of CO(2) of 44.1 ± 6.0 mmHg, partial arterial pressure of O(2) of 74.0 ± 13.5 mmHg, and an arterial O(2) saturation of 94.77 ± 3.96%. Recovery was smooth and animals were walking in 13.44 ± 7.85 min. Median recovery score (1 = excellent to 4 = poor) was 1 (range 1-2). The BDM was effective in immobilizing captive healthy lechwes with minimal cardiorespiratory changes.

  8. Isotope ratio 87Sr/86Sr in limestones from Bambui group, Brazil (MG)

    International Nuclear Information System (INIS)

    Kawashita, K.; Mizusaki, A.M.P.; Kiang, C.H.

    1987-01-01

    The Sr composition of ancient seawater can be estimated from the analysis of carbonate rocks and, in some cases, used to estimate the age of the analyzed carbonate. The normalized 87Sr/86Sr ratios in calcium carbonate fractions from 14 core samples in the Bambui Group near Montalvania, MG, were found to range between .7077 and .7280. The higher values are attributable to Sr isotopic exchange between silicate and carbonate phases during diagenesis. The ratio of .7077 obtained in two pure calcium carbonate samples is here suggested as the best aproximation for the 87Sr/86Sr value for the Bambui sea. This ratio is compatible with an age of about 700 Ma., estimated from the published 87Sr/86Sr curve of Veizer and others, an age in accordance with Quadros recent (1987, in preparation) identification of marine acritarchs from the latest Precambrian (Vendian). (author) [pt

  9. Efficacy of tramadol and butorphanol pretreatment in reducing pain on propofol injection: A placebo-controlled randomized study

    Directory of Open Access Journals (Sweden)

    Arvinderpal Singh

    2016-01-01

    Conclusion: Pretreatment with both butorphanol and tramadol significantly reduced pain on propofol injection; however, they exhibited comparable efficacy among each other. Thus, either of these two drugs can be considered for pretreatment to reduce propofol injection pain.

  10. Mineralogy of the fraction and age estimation rubidium - strontium of the Bambui Group, MG, Brazil

    International Nuclear Information System (INIS)

    Bonhomme, M.G.

    1976-01-01

    A study of the illite crystallinity of sediments of the Upper Precambrian Bambui Group, MG, has been done to determine the zones without metamorphism, the only ones able to give the age of the sedimentation. Only the region of Januaria escaped from any sensible thermo-tectonic event. The Bambui sediments contain well crystallized vermiculite probably formed during the anchimetamorphism. The rubidium-strontium age obtained in Januaria (619 + - 17 m.y.) corresponds in fact to the main phase of the Brazilian orogenic cycle. The late isotopic homogeneization was caused by a strong late diagenesis. The anchimetamorphic phosphateous sediments in Cedro do Abate show that the ferro-magnesian illite is a more easely open system than aluminous illite, and in this case dates the later event of the Brazilian cycle at 445 + - 25 m.y. The age of 600 m.y. for the metamorphism is a younger limit for the real age of the Bambui, the late Precambrian age of which is confirmed

  11. DETOMIDINE AND BUTORPHANOL FOR STANDING SEDATION IN A RANGE OF ZOO-KEPT UNGULATE SPECIES

    OpenAIRE

    Bouts, Tim; Dodds, Joanne; Berry, Karla; Arif, Abdi; Taylor, Polly; Routh, Andrew; Gasthuys, Frank

    2017-01-01

    General anesthesia poses risks for larger zoo species, like cardiorespiratory depression, myopathy, and hyperthermia. In ruminants, ruminal bloat and regurgitation of rumen contents with potential aspiration pneumonia are added risks. Thus, the use of sedation to perform minor procedures is justified in zoo animals. A combination of detomidine and butorphanol has been routinely used in domestic animals. This drug combination, administered by remote intramuscular injection, can also be applied...

  12. Pharmacokinetics of butorphanol delivered with an osmotic pump during a seven-day period in common peafowl (Pavo cristatus).

    Science.gov (United States)

    Clancy, Meredith M; KuKanich, Butch; Sykes, John M

    2015-12-01

    To determine pharmacokinetics of butorphanol delivered via osmotic pumps in common peafowl (Pavo cristatus) as a method for analgesic administration to avian species. 14 healthy adult male common peafowl. A preliminary experiment was conducted with 2 birds to establish time point and concentration requirements. Then, the remaining 12 birds were anesthetized, and 2 osmotic pumps containing butorphanol (volume, 2 mL; mean dosage, 247 μg/kg/h) were implanted subcutaneously in each bird for 7 days prior to removal. Blood samples were collected before pump implantation (time 0); 3, 6, 12, 24, 48, 72, 96, 120, 144, and 168 hours after pump implantation; and 3 and 6 hours after pump removal. Plasma butorphanol concentrations were measured via liquid chromatography-mass spectrometry. Plasma concentrations peaked (mean, 106.4 μg/L; range, 61.8 to 133.0 μg/L) at a mean of 39.0 hours, with no evidence of sedation in any bird. After pump removal, butorphanol was rapidly eliminated (half-life, 1.45 hours; range, 1.31 to 1.64 hours; n = 5). Mean clearance per fraction of dose absorbed was 2.89 L/kg/h (range, 2.00 to 5.55 L/kg/h). Mean amount of time the plasma butorphanol concentration was ≥ 60 μg/L was 85.6 hours (range, 3.5 to 155.3 hours). Plasma concentrations of butorphanol in common peafowl were maintained at or above reported efficacious analgesic concentrations. This study established a method for administering analgesics to avian patients without the need for frequent handling or injections. Use of these osmotic pumps may provide options for avian analgesia.

  13. Effects of treatment with oxytocin, xylazine butorphanol, guaifenesin, acepromazine, and detomidine on esophageal manometric pressure in conscious horses.

    Science.gov (United States)

    Wooldridge, Anne A; Eades, Susan C; Hosgood, Giselle L; Moore, Rustin M

    2002-12-01

    To compare effects of oxytocin, acepromazine maleate, xylazine hydrochloride-butorphanol tartrate, guaifenesin, and detomidine hydrochloride on esophageal manometric pressure in horses. 8 healthy adult horses. A nasogastric tube, modified with 3 polyethylene tubes that exited at the postpharyngeal area, thoracic inlet, and distal portion of the esophagus, was fitted for each horse. Amplitude, duration, and rate of propagation of pressure waveforms induced by swallows were measured at 5, 10, 20, 30, and 40 minutes after administration of oxytocin, detomidine, acepromazine, xylazine-butorphanol, guaifenesin, or saline (0.9% NaCI) solution. Number of spontaneous swallows, spontaneous events (contractions that occurred in the absence of a swallow stimulus), and high-pressure events (sustained increases in baseline pressure of > 10 mm Hg) were compared before and after drug adminision. At 5 minutes after administration, detomidine increased waveform amplitude and decreased waveform duration at the thoracic inlet. At 10 minutes after administration, detomidine increased waveform duration at the thoracic inlet. Acepromazine administration increased the number of spontaneous events at the thoracic inlet and distal portion of the esophagus. Acepromazine and detomidine administration increased the number of high-pressure events at the thoracic inlet. Guaifenesin administration increased the number of spontaneous events at the thoracic inlet. Xylazine-butorphanol, detomidine, acepromazine, and guaifenesin administration decreased the number of spontaneous swallows. Detomidine, acepromazine, and a combination of xylazine butorphanol had the greatest effect on esophageal motility when evaluated manometrically. Reduction in spontaneous swallowing and changes in normal, coordinated peristaltic activity are the most clinically relevant effects.

  14. ZZ BOREHOLE-EB6.8-MG, multi group cross-section library for deterministic and Monte Carlo codes

    International Nuclear Information System (INIS)

    Kodeli, Ivo; Aldama, Daniel L.; Leege, Piet F.A. de; Legrady, David; Hoogenboom, J. Eduard

    2007-01-01

    1 - Description: Format: MATXS and ACE; Number of groups: 175 neutron, 45 gamma-ray; Nuclides: H-1, C-12, O-16, Na-23, Mg-nat, Al-27, Si-28, -29, -30, S-nat, Cl-35, -37, K-nat, Ca-nat, Mn-55, Fe-54, -56, -57, -58, I-127, W-nat. Origin: ENDF/B-VI.8; Weighting spectrum: Fission and fusion peak at high energies and a 1/E + thermal Maxwellian extension at low energies. The following materials/nuclides are included in the library: H-1, C-12, O-16, Na-23, Mg-nat, Al-27, Si-28, -29, -30, S-nat, Cl-35, -37, K-nat, Ca-nat, Fe-54, -56, -57, -58, Mn-55, I-127, W-nat. ZZ-BOREHOLE-EB6.8-MG is a multigroup cross section library for deterministic (DOORS, DANTSYS) and Monte Carlo (MCNP) transport codes developed for the oil well logging applications. The library is based on the ENDF/B-VI.8 evaluation and was processed by the NJOY-99 code. The cross sections are given in the 175 neutron and 45 gamma ray group structure. The MATXS format library can be directly used in TRANSX code to prepare the multigroup self-shielded cross sections for deterministic discrete ordinates codes like DOORS and DANTSYS. The data provided in the GROUPR and GAMINR format were converted to the MCNP ACE format by the NSLINK, SCALE and CRSRD codes. IAEA1398/03: Multigroup cross section data for Mn-55 were added in TRANSX format

  15. THE USE OF KETAMINE-XYLAZINE OR BUTORPHANOL-AZAPERONE-MEDETOMIDINE TO IMMOBILIZE AMERICAN BLACK BEARS ( URSUS AMERICANUS).

    Science.gov (United States)

    Williamson, Ryan H; Muller, Lisa L; Blair, Coy

    2018-04-04

      Wildlife anesthetic protocols must offer rapid inductions and recoveries, be physiologically safe, and be minimally regulated. With this in mind, we evaluated differences in induction and recovery times and physiological parameters in 33 American black bears ( Ursus americanus) anesthetized with ketamine-xylazine (KX) or immobilized with a commercial drug combination of butorphanol, azaperone, and medetomidine (BAM). Dose was based on mass estimated from field observations. Bears were housed at Appalachian Bear Rescue, Townsend, Tennessee, US, or free-ranging within the Great Smoky Mountains National Park (Tennessee and North Carolina, US) and chemically immobilized for management purposes. From 11 April to 29 June 2016, we immobilized bears with injection via pole syringe or disposable dart projected from an air-powered dart rifle. Once immobilized, we measured each bear's temperature, respiration (breaths/min), heart rate (beats/min), hemoglobin oxygen saturation (via pulse oximetry), arterial blood gases, and mass (kg). We found no differences in the induction parameters, partial pressures of CO 2 , and rectal temperatures. The BAM-treated bears had lower heart and respiratory rates that led to lower hemoglobin oxygen saturation levels (from blood gas analysis, SaO 2 ). The SaO 2 after treatment with BAM (91.1±0.8%) was lower than with KX (93.4±0.9%). After handling, we reversed KX-treated bears with a x̄=0.2±0.02 mg/kg yohimbine and BAM-treated bears with x̄=1.5±0.1 mg/kg atipamezole and 0.8±0.1 mg/kg naltrexone. We found no differences in the recovery times to increased respiration and to the bear assuming a head-up position. The BAM-treated bears stood and recovered quicker than did KX-treated animals. Based on our observations, BAM appears to offer safe, predictable immobilizations with fewer drawbacks and faster recovery times than KX-treated bears.

  16. Thermographic imaging of superficial temperature in dogs sedated with medetomidine and butorphanol with and without MK-467 (L-659'066).

    Science.gov (United States)

    Vainionpää, Mari; Salla, Kati; Restitutti, Flávia; Raekallio, Marja; Junnila, Jouni; Snellman, Marjatta; Vainio, Outi

    2013-03-01

    To record, with a thermal camera, peripheral temperature changes during different sedation protocols and to relate the results to changes in the rectal temperature. Randomized crossover part-blinded experimental study. Eight healthy purpose-bred neutered Beagles (two females and six males) weight 14.5 ± 1.6 kg (mean ± SD) and aged 3-4 years. Each dog was sedated four times. Treatments were medetomidine 20 μg kg(-1) and butorphanol 0.1 mg kg(-1) (MB) with or without MK-467 500 μg kg(-1) (MK). Both drug combinations were administered IV and IM as separate treatments. A thermal camera (T425, FLIR) with a resolution of 320 by 240 was used for imaging. The dogs were placed in lateral recumbency on an insulated mattress. Digital (DFT) and metatarsal footpad temperatures (MFT) were measured with thermography. Thermograms and rectal temperature (RT) were taken before and at 3, 10, 20, 30, 45 and 60 minutes after treatment. At 60 minutes after drug administration, MFT was higher (p temperature changes can be seen and detected with thermography. MK-467 used with MB resulted in increased superficial temperatures and a decline in rectal temperature compared to MB alone. The sedation protocol may influence core temperature loss, and may also have an effect on thermographic images. © 2012 The Authors. Veterinary Anaesthesia and Analgesia. © 2012 Association of Veterinary Anaesthetists and the American College of Veterinary Anesthesiologists.

  17. Interaction of the D-isomer of 4-methylene glutamate (4-MG) with an active site thiol group of γ-glutamylcysteine synthetase (γ-GCS)

    International Nuclear Information System (INIS)

    Simondsen, R.P.; Meister, A.

    1986-01-01

    γ-GCS has an SH-group at or close to the glutamate binding site. During efforts to find a covalently bound inhibitor, the authors examined interaction of the enzyme with 4-MG with the thought that a glutamate analog with an α,β-unsaturated moiety might bind to the glutamate site and react with the active site thiol. 4-MG is not a significant substrate, but inhibits in the usual assay. Preincubation of the enzyme with DL-4-MG inactivated markedly and to about the same extent as found after preincubation with half the concentration of D-4-MG (prepared by action of glutamate decarboxylase on DL-4-MG); L-4-MG did not inactivate. Inactivation by 4-MG was decreased in the presence of L-glutamate. Inactivation by 4-MG was prevented by prior treatment of the enzyme with cystamine, which forms a disulfide with the active site thiol. After inactivation of the enzyme with 4-[2- 14 C]MG followed by separation of the enzyme by gel filtration, 0.9 mole of label was found per mole of enzyme, amino acid analysis after acid hydrolysis of the labeled enzyme gave labeled products that include the expected adduct formed by reaction of cysteine with 4-MG

  18. The Activity Support Scale for Multiple Groups (ACTS-MG): Child-reported Physical Activity Parenting in African American and Non-Hispanic White Families.

    Science.gov (United States)

    Lampard, Amy M; Nishi, Akihiro; Baskin, Monica L; Carson, Tiffany L; Davison, Kirsten K

    2016-01-01

    This study aimed to assess the psychometric properties of a child-report, multidimensional measure of physical activity (PA) parenting, the Activity Support Scale for Multiple Groups (ACTS-MG), in African American and non-Hispanic white families. The ACTS-MG was administered to children aged 5 to 12 years. A three factor model of PA parenting (Modeling of PA, Logistic Support, and Restricting Access to Screen-based Activities) was tested separately for mother's and fathers' PA parenting. The proposed three-factor structure was supported in both racial groups for mothers' PA parenting and in the African American sample for fathers' PA parenting. Factorial invariance between racial groups was demonstrated for mother's PA parenting. Building on a previous study examining the ACTS-MG parent-report, this study supports the use of the ACTS-MG child-report for mothers' PA parenting. However, further research is required to investigate the measurement of fathers' PA parenting across racial groups.

  19. Randomised study of Casodex 50 MG monotherapy vs orchidectomy in the treatment of metastatic prostate cancer. The Scandinavian Casodex Cooperative Group

    DEFF Research Database (Denmark)

    Iversen, P; Tveter, K; Varenhorst, E

    1996-01-01

    The effect of Casodex (ICI 176,334), a new, once-daily, selective antiandrogen, given as 50 mg monotherapy, was compared with orchidectomy in a randomised, multicentre, open study in 376 patients with metastatic prostate cancer. At 3 months, PSA was reduced by 86% in the Casodex group and by 96......% in the orchidectomy group. Treatment failed in 51 patients in the orchidectomy group and 66 showed a subjective response. Treatment failed in 86 patients treated with Casodex and 40 patients showed a subjective response. Patients treated with Casodex maintained their sexual interest better than those...

  20. TheoSSA - Model WD Spectra on Demand: The Impact of Ne, Na, Mg, and Iron-group Elements on the Balmer Lines

    Science.gov (United States)

    Reindl, N.; Rauch, T.

    2015-06-01

    The registered German Astrophysical Virtual Observatory (GAVO) service TheoSSA provides easy access to synthetic stellar spectra. This GAVO database contains already ten thousands of these, which were calculated with different chemical compositions of the elements H to Ni. In addition to the database, it is possible to calculate individual spectra for hot, compact stars based on the Tübingen NLTE Model-Atmosphere Package (TMAP) via the TMAW service. The TMAW models were, in the pilot phase, restricted to the elements H, He, C, N, and O. Now, TMAW is extended to additionally consider opacities from Ne, Na, and Mg. Soon, TMAW will also be able to include the opacities from the so-called iron-group elements (Ca - Ni). We describe the improvements and show the impact of Ne, Na, Mg, and iron-group elements on the Balmer lines.

  1. Considerations on the age of the Bambui Group (MG, Brazil) based on isotopic analyses of Sr and Pb

    International Nuclear Information System (INIS)

    Couto, J.G.P.; Cordani, U.G.; Kawashita, K.

    1981-01-01

    Based on radiometric ages, the Bambui Group deposition time is related to the end of the Precambrian. However, the ages determined and released through scientific magazines are mot in agreement (600-1350 m.y.) and many doubts about the geochrological picture of this important lithostratigraphic unit remained for a long time. As a result of the work developed by Metamig, CPGeo (IG-USP) and IPEN (SP), Rb/Sr and Pb/Pb isotopic determinations were done on 31 rocks samples and 17 galenas collected from the Bambui Basin distributed in Minas Gerais State. The Rb/Sr ages of 590 m.y. for Pirapora Formation, 620 m.y. for Tres Marias Formation, and 640 m.y. for the Paraopeba Formation situated in the stable area are linked to sedimentation processes. In the Paracatu region the age of 680 m.y. found for the Paraopeba Formation is related to metamorphic events. The lead isotopic ratios from the galenas suggest an isotopic evolution in two stages. The first ended with the lead separation from the mantle and its incorporation to the crust during events of the Transamazonic Cycle. The second ended when the lead were incorporated to the galenas and seems to be related to one or more events of the Brazilian Cycle. (Author) [pt

  2. Exigências nutricionais em macronutrientes minerais (Ca, P, Mg, Na e K para novilhos de diferentes grupos genéticos Macrominerals (Ca, P, Mg, Na, and K requirements for young bulls from different genetic groups

    Directory of Open Access Journals (Sweden)

    Fernando de Paula Leonel

    2006-04-01

    Full Text Available Determinaram-se as exigências em macronutrientes minerais (Ca, P, Mg, Na e K utilizando-se 44 novilhos não-castrados, pertencentes a quatro grupos genéticos (Nelore; F1 Nelore x Aberdeen-Angus; F1 Nelore x Pardo-Suíço e F1 Nelore x Simental, com média de 10 e 11 meses de idade e peso vivo inicial de 362 ± 35 kg. A ração experimental foi composta de feno de capim-braquiária (Brachiaria decumbens, Stapf., farelo de soja, milho (grão moído, melaço em pó e suplementos de macro e micronutrientes inorgânicos. As exigências líquidas para ganho de peso, em cada macronutriente, foram obtidas por meio da derivada primeira de suas respectivas equações, estimadas a partir de regressão não-linear do conteúdo do nutriente (Ca, P, Mg, Na e K, em função do peso de corpo vazio do animal. Para conversão do peso vivo em peso de corpo vazio, utilizou-se a equação obtida a partir da regressão do peso corporal vazio dos animais experimentais em função de seus pesos imediatamente antes do abate. As exigências de mantença foram estimadas de acordo com as recomendações do NRC e ARC e os coeficientes de absorção adotados para os cinco macronutrientes foram aqueles propostos pelo ARC. O teste de identidade de modelos indicou não haver diferenças entre as equações de regressão para os minerais entre os quatro grupos genéticos estudados. Não foram verificadas, pela análise de variância, diferenças entre as exigências de macrominerais entre os diferentes grupos genéticos.The objective of this trial was to determine the macrominerals requirements (Ca, P, Mg, Na, and K for young bulls from different genetic groups. Forty-four young bulls from the following genetic groups were used: Nellore, F1 Nellore x Aberdeen-Angus, F1 Nellore x Brown Swiss, and F1 Nellore x Simmental. Animals averaged 362 ± 35 kg of initial body weight and between 10 to 11 months of age. Diet contained signal grass hay (Brachiaria decumbens, Stapf., soybean

  3. Safety and pharmacokinetics of single and multiple intravenous bolus doses of diclofenac sodium compared with oral diclofenac potassium 50 mg: A randomized, parallel-group, single-center study in healthy subjects.

    Science.gov (United States)

    Munjal, Sagar; Gautam, Anirudh; Okumu, Franklin; McDowell, James; Allenby, Kent

    2016-01-01

    In a randomized, parallel-group, single-center study in 42 healthy adults, the safety and pharmacokinetic parameters of an intravenous formulation of 18.75 and 37.5 mg diclofenac sodium (DFP-08) following single- and multiple-dose bolus administration were compared with diclofenac potassium 50 mg oral tablets. Mean AUC0-inf values for a 50-mg oral tablet and an 18.75-mg intravenous formulation were similar (1308.9 [393.0]) vs 1232.4 [147.6]). As measured by the AUC, DFP-08 18.75 mg and 37.5 mg demonstrated dose proportionality for extent of exposure. One subject in each of the placebo and DFP-08 18.75-mg groups and 2 subjects in the DFP-08 37.5-mg group reported adverse events that were considered by the investigator to be related to the study drug. All were mild in intensity and did not require treatment. Two subjects in the placebo group and 1 subject in the DFP-08 18.75-mg group reported grade 1 thrombophlebitis; no subjects reported higher than grade 1 thrombophlebitis after receiving a single intravenous dose. The 18.75- and 37.5-mg doses of intravenous diclofenac (single and multiple) were well tolerated for 7 days. Additional efficacy and safety studies are required to fully characterize the product. © 2015, The American College of Clinical Pharmacology.

  4. Comparison in myelography between iodixanol 270 and 320 mgI/ml and iotrolan 300 mgI/ml: a multicentre, randomised, parallel-group, double-blind, phase III trial

    International Nuclear Information System (INIS)

    Palmers, Yvan; Kuhn, Fritz-Peter; Petersen, Dirk; De Greef, Danielle

    2002-01-01

    The objective of the trial was to compare the safety and efficacy of the non-ionic, dimeric, isotonic contrast medium iodixanol (Visipaque 270 and 320 mgI/ml) with those of iotrolan (Isovist 300 mgI/ml) in myelography. After lumbar or cervical puncture, 315 patients were examined in a multicentre, double-blind, randomised, comparative myelography study. Image quality, changes in vital signs, immediate and delayed adverse events were registered. There was a tendency for better images with iodixanol 320 than with iodixanol 270 and iotrolan 300, but the overall quality was good or excellent with all products. The frequency of patients reporting adverse events and headache varied much across centres, but there was no statistically significant difference between the contrast media. The incidence of events was higher after lumbar puncture than after cervical puncture, in women rather than in men, and after puncture with a 22-gauge (G) bevel-tipped needle compared with a 24 G Sprotte needle. The frequency of headache did not correlate with the absence of pathology. The higher iodine concentration in iodixanol 320 could be an advantage for film quality. When compared with iotrolan 300, iodixanol 320 and 270 give similar incidences of adverse events, including headache. (orig.)

  5. In vitro effects of oxytocin, acepromazine, detomidine, xylazine, butorphanol, terbutaline, isoproterenol, and dantrolene on smooth and skeletal muscles of the equine esophagus.

    Science.gov (United States)

    Wooldridge, Anne A; Eades, Susan C; Hosgood, Giselle L; Moore, Rustin M

    2002-12-01

    To characterize the in vitro effects of oxytocin, acepromazine, xylazine, butorphanol, detomidine, dantrolene, isoproterenol, and terbutaline on skeletal and smooth muscle from the equine esophagus. 14 adult horses without digestive tract disease. Circular and longitudinal strips from the skeletal and smooth muscle of the esophagus were suspended in tissue baths, connected to force-displacement transducers interfaced with a physiograph, and electrical field stimulation was applied. Cumulative concentration-response curves were generated for oxytocin, acepromazine, xylazine, detomidine, butorphanol, isoproterenol, terbutaline, and dantrolene. Mean maximum twitch amplitude for 3 contractions/min was recorded and compared with predrug-vehicle values for the skeletal muscle segments, and area under the curve (AUC) for 3 contractions/min was compared with predrug-vehicle values for the smooth muscle segments. No drugs caused a significant change in skeletal muscle response. In smooth muscle, isoproterenol, terbutaline, and oxytocin significantly reduced AUC in a concentration-dependent manner. Maximum reduction in AUC was 69% at 10(-4) M for isoproterenol, 63% at 10(-6) M for terbutaline, and 64% at 10(-4) M for oxytocin. Isoproterenol, terbutaline, and oxytocin cause relaxation of the smooth muscle portion of the esophagus. The clinical relaxant effects on the proximal portion of the esophagus reported of drugs such as oxytocin, detomidine, and acepromazine may be the result of centrally mediated mechanisms.

  6. Randomised study of Casodex 50 MG monotherapy vs orchidectomy in the treatment of metastatic prostate cancer. The Scandinavian Casodex Cooperative Group

    DEFF Research Database (Denmark)

    Iversen, P; Tveter, K; Varenhorst, E

    1996-01-01

    % in the orchidectomy group. Treatment failed in 51 patients in the orchidectomy group and 66 showed a subjective response. Treatment failed in 86 patients treated with Casodex and 40 patients showed a subjective response. Patients treated with Casodex maintained their sexual interest better than those...

  7. Randomised, double-blind, placebo-controlled studies on flurbiprofen 8.75 mg lozenges in patients with/without group A or C streptococcal throat infection, with an assessment of clinicians' prediction of 'strep throat'.

    Science.gov (United States)

    Shephard, A; Smith, G; Aspley, S; Schachtel, B P

    2015-01-01

    Diagnosing group A streptococcus (Strep A) throat infection by clinical examination is difficult, and misdiagnosis may lead to inappropriate antibiotic use. Most patients with sore throat seek symptom relief rather than antibiotics, therefore, therapies that relieve symptoms should be recommended to patients. We report two clinical trials on the efficacy and safety of flurbiprofen 8.75 mg lozenge in patients with and without streptococcal sore throat. The studies enrolled adults with moderate-to-severe throat symptoms (sore throat pain, difficulty swallowing and swollen throat) and a diagnosis of pharyngitis. The practitioner assessed the likelihood of Strep A infection based on historical and clinical findings. Patients were randomised to flurbiprofen 8.75 mg or placebo lozenges under double-blind conditions and reported the three throat symptoms at baseline and at regular intervals over 24 h. A total of 402 patients received study medication (n = 203 flurbiprofen, n = 199 placebo). Throat culture identified Strep A in 10.0% of patients and group C streptococcus (Strep C) in a further 14.0%. The practitioners' assessments correctly diagnosed Strep A in 11/40 cases (sensitivity 27.5%, and specificity 79.7%). A single flurbiprofen lozenge provided significantly greater relief than placebo for all three throat symptoms, lasting 3-4 h for patients with and without Strep A/C. Multiple doses of flurbiprofen lozenges over 24 h also led to symptom relief, although not statistically significant in the Strep A/C group. There were no serious adverse events. The results highlight the challenge of identifying Strep A based on clinical features. With the growing problem of antibiotic resistance, non-antibiotic treatments should be considered. As demonstrated here, flurbiprofen 8.75 mg lozenges are an effective therapeutic option, providing immediate and long-lasting symptom relief in patients with and without Strep A/C infection. © 2014 John Wiley & Sons Ltd.

  8. Factors associated with prolonged time to treatment failure with fulvestrant 500 mg in patients with post-menopausal estrogen receptor-positive advanced breast cancer: a sub-group analysis of the JBCRG-C06 Safari study.

    Science.gov (United States)

    Kawaguchi, Hidetoshi; Masuda, Norikazu; Nakayama, Takahiro; Aogi, Kenjiro; Anan, Keisei; Ito, Yoshinori; Ohtani, Shoichiro; Sato, Nobuaki; Saji, Shigehira; Takano, Toshimi; Tokunaga, Eriko; Nakamura, Seigo; Hasegawa, Yoshie; Hattori, Masaya; Fujisawa, Tomomi; Morita, Satoshi; Yamaguchi, Miki; Yamashita, Hiroko; Yamashita, Toshinari; Yamamoto, Yutaka; Yotsumoto, Daisuke; Toi, Masakazu; Ohno, Shinji

    2018-01-01

    The JBCRG-C06 Safari study showed that earlier fulvestrant 500 mg (F500) use, a longer time from diagnosis to F500 use, and no prior palliative chemotherapy were associated with significantly longer time to treatment failure (TTF) among Japanese patients with estrogen receptor-positive (ER+) advanced breast cancer (ABC). The objective of this sub-group analysis was to further examine data from the Safari study, focusing on ER + and human epidermal growth factor receptor-negative (HER2-) cases. The Safari study (UMIN000015168) was a retrospective, multi-center cohort study, conducted in 1,072 patients in Japan taking F500 for ER + ABC. The sub-analysis included only patients administered F500 as second-line or later therapy (n = 960). Of these, 828 patients were HER2-. Results Multivariate analysis showed that advanced age (≥65 years; p = .035), longer time (≥3 years) from ABC diagnosis to F500 use (p < .001), no prior chemotherapy (p < .001), and F500 treatment line (p < .001) were correlated with prolonged TTF (median = 5.39 months). In ER+/HER2- patients receiving F500 as a second-line or later therapy, treatment line, advanced age, no prior palliative chemotherapy use, and a longer period from ABC diagnosis to F500 use were associated with longer TTF.

  9. Bicalutamide (150 mg) versus placebo as immediate therapy alone or as adjuvant to therapy with curative intent for early nonmetastatic prostate cancer: 5.3-year median followup from the Scandinavian Prostate Cancer Group Study Number 6

    DEFF Research Database (Denmark)

    Iversen, Peter; Johansson, Jan-Erik; Lodding, Pär

    2004-01-01

    We evaluated the benefits of adding 150 mg bicalutamide to standard care, that is radical prostatectomy, radiotherapy or watchful waiting (WW), in patients with localized or locally advanced prostate cancer....

  10. A randomised comparison of bicalutamide ('Casodex') 150 mg versus placebo as immediate therapy either alone or as adjuvant to standard care for early non-metastatic prostate cancer. First report from the Scandinavian Prostatic Cancer Group Study No. 6

    DEFF Research Database (Denmark)

    Iversen, P; Tammela, T L J; Vaage, S

    2002-01-01

    To assess the efficacy and tolerability of bicalutamide 150 mg ('Casodex'(1)) as immediate therapy, either alone or as adjuvant to treatment of curative intent, in patients with early (T1b-T4, any N, M0) prostate cancer....

  11. Beyond alkyl transfer: Synthesis of main group metal (Mg, Ca, Zn) silyl and tris(oxazolinyl)borato complexes and their stoichiometric and catalytic reactions with borane Lewis acids and carbonyls

    Energy Technology Data Exchange (ETDEWEB)

    Lampland, Nicole Lynn [Iowa State Univ., Ames, IA (United States)

    2015-05-09

    Recently, the fundamental knowledge of main group metal chemistry has grown. This progress is crucial for the further development of main group metal compounds in silicon chemistry and catalysis and for advancing their applications as green alternatives to many rare earth and transition metal compounds. This thesis focuses on reactivity beyond the welldocumented alkyl-transfer applications for main group metals, and it highlights examples of reactions with Lewis acids and the reduction of carbonyls.

  12. Effects of atorvastatin on biomarkers of immune activation, inflammation, and lipids in virologically suppressed, human immunodeficiency virus-1-infected individuals with low-density lipoprotein cholesterol <130 mg/dL (AIDS Clinical Trials Group Study A5275).

    Science.gov (United States)

    Nixon, Daniel E; Bosch, Ronald J; Chan, Ellen S; Funderburg, Nicholas T; Hodder, Sally; Lake, Jordan E; Lederman, Michael M; Klingman, Karin L; Aberg, Judith A

    Persistent immune activation and inflammation in virologically suppressed human immunodeficiency virus (HIV) infection are linked to excess cardiovascular risk. To evaluate atorvastatin as a strategy to reduce cardiovascular risk. A5275 was a multicenter, prospective, randomized, double-blind, placebo-controlled, cross-over pilot study of atorvastatin (10 mg/day for 4 weeks then 20 mg/day for 16 weeks) with a planned enrollment of 97 HIV-infected participants ≥18 years old, receiving boosted protease inhibitor-based antiretroviral therapy for ≥6 months, with plasma HIV-1 RNAs below limits of quantification ≥180 days, and fasting low-density lipoprotein (LDL) cholesterol ≥70 and atorvastatin treatment. Analyses were as-treated. Ninety-eight participants were enrolled at 31 U S sites and 73 completed study treatment. Atorvastatin treatment did not decrease T-lymphocyte or monocyte activation, circulating biomarker levels (interleukin-6, D-dimer, soluble CD14, soluble CD163, monocyte chemoattractant protein-1, interferon-gamma-induced protein-10, high-sensitivity C-reactive protein, CD40L, and P-selectin) or white blood cell Krüppel-like Factor 2/4 messenger RNA levels. Pre-to-post atorvastatin reductions in calculated LDL (-38%), oxidized-LDL (-33%), and lipoprotein-associated phospholipase A2 (-31%) were significant (P atorvastatin did not significantly decrease levels of soluble or cellular biomarkers of immune activation and inflammation but resulted in robust reductions in LDL cholesterol, oxLDL, and lipoprotein-associated phospholipase A 2 , biomarkers associated with cardiovascular risk. Copyright © 2016 National Lipid Association. All rights reserved.

  13. Mifepristone 5 mg versus 10 mg for emergency contraception: double-blind randomized clinical trial

    Directory of Open Access Journals (Sweden)

    Carbonell JL

    2015-01-01

    Full Text Available Josep Lluis Carbonell,1 Ramon Garcia,2 Adriana Gonzalez,2 Andres Breto,2 Carlos Sanchez2 1Mediterranea Medica Clinic, Valencia, Spain; 2Eusebio Hernandez Gynecology and Obstetrics Teaching Hospital, Havana, Cuba Purpose: To estimate the efficacy and safety of 5 mg and 10 mg mifepristone for emergency contraception up to 144 hours after unprotected coitus. Methods: This double-blind randomized clinical trial was carried out at Eusebio Hernandez Hospital (Havana, Cuba. A total of 2,418 women who requested emergency contraception after unprotected coitus received either 5 mg or 10 mg mifepristone. The variables for assessing efficacy were the pregnancies that occurred and the fraction of pregnancies that were prevented. Other variables assessed were the side effects of mifepristone, vaginal bleeding, and changes in the date of the following menstruation. Results: There were 15/1,206 (1.2% and 9/1,212 (0.7% pregnancies in the 5 mg and 10 mg group, respectively (P=0.107. There were 88% and 93% prevented pregnancies in the 5 mg and 10 mg group, respectively. The side effect profiles were similar in both groups. Delayed menstruation ≥7 days was experienced by 4.9% and 11.0% of subjects in the 5 mg and 10 mg group, respectively (P=0.001. There was a significant high failure rate for women weighing >75 kg in the 5 mg group. Conclusion: It would be advisable to use the 10 mg dose of mifepristone for emergency contraception as there was a trend suggesting that the failure rate of the larger dose was lower. Keywords: mifepristone, emergency contraception

  14. Effect of different seawater Mg

    NARCIS (Netherlands)

    Mewes, A.; Langer, G.; de Nooijer, L.J.; Bijma, J.; Reichart, G.J.

    2014-01-01

    Magnesium, incorporated in foraminiferal calcite (Mg/CaCC), is used intensively to reconstruct past seawater temperatures but, in addition to temperature, the Mg/CaCC of foraminiferal tests also depends on the ratio of Mg and Ca in seawater (Mg/CaSW). The physiological mechanisms responsible for

  15. Investigation of the 26Mg(d, p)27Mg reaction

    NARCIS (Netherlands)

    Meurders, F.; Steld, A. van der

    1974-01-01

    The angular distributions of 31 protons groups from the 26Mg(d, p)27Mg reaction have been measured at Ed = 12.0 MeV with a split-pole magnetic spectrograph. Excitation energies have been determined for 29 bound states. Three new levels have been found. A DWBA analysis yields ln values for 19 levels;

  16. Quasicrystal-reinforced Mg alloys.

    Science.gov (United States)

    Kyun Kim, Young; Tae Kim, Won; Hyang Kim, Do

    2014-04-01

    The formation of the icosahedral phase (I-phase) as a secondary solidification phase in Mg-Zn-Y and Mg-Zn-Al base systems provides useful advantages in designing high performance wrought magnesium alloys. The strengthening in two-phase composites (I-phase + α -Mg) can be explained by dispersion hardening due to the presence of I-phase particles and by the strong bonding property at the I-phase/matrix interface. The presence of an additional secondary solidification phase can further enhance formability and mechanical properties. In Mg-Zn-Y alloys, the co-presence of I and Ca 2 Mg 6 Zn 3 phases by addition of Ca can significantly enhance formability, while in Mg-Zn-Al alloys, the co-presence of the I-phase and Mg 2 Sn phase leads to the enhancement of mechanical properties. Dynamic and static recrystallization are significantly accelerated by addition of Ca in Mg-Zn-Y alloy, resulting in much smaller grain size and more random texture. The high strength of Mg-Zn-Al-Sn alloys is attributed to the presence of finely distributed Mg 2 Sn and I-phase particles embedded in the α -Mg matrix.

  17. Mg2BIV: Narrow Bandgap Thermoelectric Semiconductors

    Science.gov (United States)

    Kim, Il-Ho

    2018-05-01

    Thermoelectric materials can convert thermal energy directly into electric energy and vice versa. The electricity generation from waste heat via thermoelectric devices can be considered as a new energy source. For instance, automotive exhaust gas and all industrial processes generate an enormous amount of waste heat that can be converted to electricity by using thermoelectric devices. Magnesium compound Mg2BIV (BIV = Si, Ge or Sn) has a favorable combination of physical and chemical properties and can be a good base for the development of new efficient thermoelectrics. Because they possess similar properties to those of group BIV elemental semiconductors, they have been recognized as good candidates for thermoelectric applications. Mg2Si, Mg2Ge and Mg2Sn with an antifluorite structure are narrow bandgap semiconductors with indirect band gaps of 0.77 eV, 0.74 eV, and 0.35 eV, respectively. Mg2BIV has been recognized as a promising material for thermoelectric energy conversion at temperatures ranging from 500 K to 800 K. Compared to other thermoelectric materials operating in the similar temperature range, such as PbTe and filled skutterudites, the important aspects of Mg2BIV are non-toxic and earth-abundant elements. Based on classical thermoelectric theory, the material factor β ( m* / m e)3/2μκ L -1 can be utilized as the criterion for thermoelectric material selection, where m* is the density-of-states effective mass, me is the mass of an electron, μ is the carrier mobility, and κL is the lattice thermal conductivity. The β for magnesium silicides is 14, which is very high compared to 0.8 for iron silicides, 1.4 for manganese silicides, and 2.6 for silicon-germanium alloys. In this paper, basic phenomena of thermoelectricity and transport parameters for thermoelectric materials were briefly introduced, and thermoelectric properties of Mg2BIV synthesized by using a solid-state reaction were reviewed. In addition, various Mg2BIV compounds were discussed

  18. Efficacy of 5MG and 10MG rosuvastatin in type-2 diabetes mellitus with hypercholesteroalemia

    International Nuclear Information System (INIS)

    Ullah, F.; Rahim, F.; Rahman, S.U.; Ashfaq, M.; Afridi, A.K.

    2015-01-01

    Background: Coronary Heart Disease (CHD) is the most important complication and the leading cause of death in patients with type 2 diabetes mellitus (T2DM). Hypercholesterolemia is an important modifiable risk factor for CHD. Statins are the first line drugs for the treatment of hypercholesterolemia in DM. Comparative studies between different statins are available but different doses of the same statin have not been compared in our population. The objective of this study is to compare mean reduction in serum LDL-C level after using 5mg and 10mg of rosuvastatin among T2DM patients with hypercholesterolemia. This study will help finding lowest effective dose of rosuvastatin to achieve internationally set low density lipoprotein cholesterol (LDL-C) goals. Method: A total of 82 patients with T2DM having fasting LDL-C levels equal or more than 100mg/dl were randomly allocated into two groups with 41 patients in each group. Baseline fasting serum LCL-C levels were obtained in all patients. Group A received 5mg while group B received 10mg of rosuvastatin daily at night. After 6 weeks, fasting LDL-C levels were obtained and analysed to compare the mean±SD reduction of LDL-C levels in both groups. Results: Baseline mean±SD LDL-C levels in group A and group B were 134.12±30.02 and 143.49±32.01 respectively (p 0.176). Follow up mean ± SD LDL-C levels were 81.59±28.47 and 83.24±36.06 respectively (p 0.818). Mean ± SD reduction in LDL-C levels from baseline levels in group A and group B were 52.51±19.49 and 60.20±24.09 (p 0.116). Conclusion: Rosuvastatin 5mg is as effective as 10mg in reducing the LDL-C levels in type 2 diabetic patients with hypercholesterolemia. (author)

  19. Adsorption of arginine, glycine and aspartic acid on Mg and Mg-based alloy surfaces: A first-principles study

    Science.gov (United States)

    Fang, Zhe; Wang, Jianfeng; Yang, Xiaofan; Sun, Qiang; Jia, Yu; Liu, Hairong; Xi, Tingfei; Guan, Shaokang

    2017-07-01

    Studying the adsorption behaviors of biomolecules on the surface of Mg and Mg-based alloy has a fundamental and important role for related applications in biotechnology. In the present work, we systematically investigate and compare the adsorption properties of three typical amino acids, i.e., Arg (arginine), Gly (glycine) and Asp (aspartic acid), which form RGD tripeptide, on the Mg (0 0 0 1) surface with various doping (Zn, Y, and Nd), and aim to realize proper binding between biomolecules and Mg and Mg-based biomedical materials. Our results show that flat adsorption configurations of the functional groups binding to the surfaces are favored in energy for all the three selected amino acids. In specific, for the amino acids adsorped on clean Mg (0 0 0 1) surface, the adsorption energy (Eads) of Arg is found to be -1.67 eV for the most stable configuration, with amino and guanidyl groups binding with the surface. However, Gly (Asp) is found to binding with the surface through amino and carboxyl groups, with a -1.16 eV (-1.15 eV) binding energy. On the 2% Zn doped Mg (0 0 0 1) alloy surface (Mg-Zn (2%)), the Eads are significantly increased to be -1.91 eV, -1.32 eV and -1.35 eV for Arg, Gly and Asp, respectively. While the Mg-Y (1%) and Mg-Nd (1%) slightly weaken the adsorption of three amino acids. Moreover, we have performed detail discussions of the binding properties between amino acids and surfaces by projected density of states (PDOS) combined with charge transfer analyses. Our studies provide a comprehensive understanding on the interactions between amino acids and Mg and Mg-based alloy surfaces, with respect to facilitate the applications of Mg and Mg-based biomedical alloys in biosensing, drug delivery, biomolecule coating and other fields in biotechnology.

  20. Myasthenia Gravis (MG): Medical Management

    Science.gov (United States)

    ... take effect, prior to surgery or for myasthenic crisis. However, some people receive regular plasmapheresis or IVIg as a supplement to immunosuppressant drugs. Pregnancy In rare cases, pregnancy appears to trigger the onset of MG. ...

  1. Single crystal structures of the new vanadates CuMgVO{sub 4} and AgMgVO{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Ben Yahia, Hamdi, E-mail: Hyahia@qf.org.qa [Research Institute of Electrochemical Energy, National Institute of Advanced Industrial Science and Technology (AIST), 1-8-31 Midorigaoka, Ikeda, Osaka 563-8577 (Japan); Qatar Environment and Energy Research Institute, Hamad Bin Khalifa University, Qatar Foundation, PO Box 5825, Doha (Qatar); Shikano, Masahiro, E-mail: shikano.masahiro@aist.go.jp [Research Institute of Electrochemical Energy, National Institute of Advanced Industrial Science and Technology (AIST), 1-8-31 Midorigaoka, Ikeda, Osaka 563-8577 (Japan); Essehli, Rachid; Belharouak, Ilias [Qatar Environment and Energy Research Institute, Hamad Bin Khalifa University, Qatar Foundation, PO Box 5825, Doha (Qatar)

    2016-08-01

    The new compounds CuMgVO{sub 4} and AgMgVO{sub 4} have been synthesized by a solid state reaction route. Their crystal structures were determined from single-crystal X-ray diffraction data. CuMgVO{sub 4} crystallizes with Na{sub 2}CrO{sub 4}-type structure with space group Cmcm, a = 5.6932 (10), b = 8.7055 (15), c = 6.2789 (10) Å, V = 311.20 (9) Å{sup 3}, and Z = 4, whereas AgMgVO{sub 4} crystallizes in the maricite-type structure with space group Pnma, a = 9.4286 (14), b = 6.7465 (10), c = 5.3360 (8) Å, V = 339.42 (9) Å{sup 3}, and Z = 4. Both structures of CuMgVO{sub 4}, and AgMgVO{sub 4} contain MgO{sub 4} chains made up of edge-sharing MgO{sub 6} octahedra. In CuMgVO{sub 4} the MgO{sub 4} chains are interconnected through CuVO{sub 4} double chains made up of VO{sub 4} and CuO{sub 4} tetrahedra sharing corners and edges, however in AgMgVO{sub 4} the chains are interlinked by the VO{sub 4} and AgO{sub 4} tetrahedra sharing only corners. - Highlights: • We have been able to grow CuMgVO{sub 4} and AgMgVO{sub 4} single crystals. • We solved their crystal structures using single crystal data. • We compared the crystal structures of CuMgVO{sub 4} and AgMgVO{sub 4}.

  2. Avaliação algimétrica por estímulo nociceptivo térmico e pressórico em cães pré-tratados com levomepromazina, midazolam e quetamina associados ou não ao butorfanol ou buprenorfina The algimetry evaluation for thermic and pressoric nociceptive stimulus in pre treated dogs with methotrimeprazine, midazolam and ketamine associated or not with butorphanol or buprenorphine

    Directory of Open Access Journals (Sweden)

    André Leguthe Rosa

    2005-02-01

    methotrimeprazine and midazolam put on the same syringe with ketamine. The animals of GII received the same treatment of GI but associated with butorphanol and finally the animals of GIII received the same treatment of GI but associated with buprenorphine. The routine parametric evaluations has been proceeded, although using the thermo algimetry measured in °C with the average of 52°C and the pressoric algimetry in Kg. RESULTS: In the thermo algimetry, there has been significant difference in GI at the moments M0, M1, M4 and M5; in GII it was found at M0, M1, M5 and M6 and in GIII it was observed the significant at M0 and M1. It has also been shown in pressoric algimetry significant difference in GI at the moments M0, M2 and M3. Among GII it has observed significant difference at all moments and it has found at M0, M9 in GIII. Thus, it has observed significant differences between all groups; for such the M2 of GII smaller than the others; and M4, M5 of GIII bigger than GI and GII. In the assessment of all periods it was observed significant latent period bigger in GI, however, with reasonable period and short recovery in GII and GIII. In the order hand, the postural tonus recovery it was longer in GIII, followed by GII and finally GI. CONCLUSION: The used method for the measurement of algic stimulus was efficient, noticing a reasonable analgesic period of 3 hours for butorphanol and 6 hours for buprenorphine.

  3. Mg-MOF-74/MgF₂ Composite Coating for Improving the Properties of Magnesium Alloy Implants: Hydrophilicity and Corrosion Resistance.

    Science.gov (United States)

    Liu, Wei; Yan, Zhijie; Ma, Xiaolu; Geng, Tie; Wu, Haihong; Li, Zhongyue

    2018-03-07

    Surface modification on Mg alloys is highly promising for their application in the field of bone repair. In this study, a new metal-organic framework/MgF₂ (Mg-MOF-74/MgF₂) composite coating was prepared on the surface of AZ31B Mg alloy via pre-treatment of hydrofluoric acid and in situ hydrothermal synthesis methods. The surface topography of the composite coating is compact and homogeneous, and Mg-MOF-74 has good crystallinity. The corrosion resistance of this composite coating was investigated through Tafel polarization test and immersion test in simulated body fluid at 37 °C. It was found that Mg-MOF-74/MgF₂ composite coating significantly slowed down the corrosion rate of Mg alloy. Additionally, Mg-MOF-74/MgF₂ composite coating expresses super-hydrophilicity with the water contact angle of nearly 0°. In conclusion, on the basis of MgF₂ anticorrosive coating, the introduction of Mg-MOF-74 further improves the biological property of Mg alloys. At last, we propose that the hydrophilicity of the composite coating is mainly owing to the large number of hydroxyl groups, the high specific surface area of Mg-MOF-74, and the rough coating produced by Mg-MOF-74 particles. Hence, Mg-MOF-74 has a great advantage in enhancing the hydrophilicity of Mg alloy surface.

  4. Electrocardiographic and hemato-biochemical effects of two balanced anesthetic protocols in dogs

    Directory of Open Access Journals (Sweden)

    Anubhav Khurana

    2014-10-01

    Full Text Available Aim: The purpose of this study was to compare the electrocardiographic (ECG, hematological and clinico-biochemical effects of two balanced anesthetic protocols in dogs. Materials and Methods: A total of 20 clinical cases of dogs, randomly divided into two groups of 10 animals each were made part of study. All dogs were premedicated with injection atropine sulfate @ 0.04 mg/kg body weight (b. wt. subcutaneously followed 15 min later with injection butorphanol tartarate @ 0.2 mg/kg b. wt. intravenous (IV. Subsequently after 10 min premedicated with injection diazepam @ 0.5 mg/kg b. wt. IV (Group DP or injection acepromazine maleate @ 0.015 mg/kg b. wt. IV (Group AP followed by injection propofol “till effect” IV for induction of surgical anesthesia. The animals were immediately transferred to halothane in oxygen. Observations recorded in dogs included ECG recordings, hematological and clinico-biochemical observations at various time intervals. Results: No arrhythmia was observed in any animal pre-operatively and intra-operatively in any of the groups. Significant fall in packed cell volume (PCV and total erythrocyte count occurred in DP group in early phase, whereas only PCV decreased significantly in AP group. Biochemical parameters were non-significant in both the groups. Conclusion: Both diazepam-butorphanol-propofol-halothane and acepromazine-butorphanol-propofol-halothane are safe with respect to their ECG, hematological and biochemical effects in clinical cases.

  5. Nanostructured Layered Cathode for Rechargeable Mg-Ion Batteries.

    Science.gov (United States)

    Tepavcevic, Sanja; Liu, Yuzi; Zhou, Dehua; Lai, Barry; Maser, Jorg; Zuo, Xiaobing; Chan, Henry; Král, Petr; Johnson, Christopher S; Stamenkovic, Vojislav; Markovic, Nenad M; Rajh, Tijana

    2015-08-25

    Nanostructured bilayered V2O5 was electrochemically deposited within a carbon nanofoam conductive support. As-prepared electrochemically synthesized bilayered V2O5 incorporates structural water and hydroxyl groups, which effectively stabilizes the interlayers and provides coordinative preference to the Mg(2+) cation in reversible cycling. This open-framework electrode shows reversible intercalation/deintercalation of Mg(2+) ions in common electrolytes such as acetonitrile. Using a scanning transmission electron microscope we demonstrate that Mg(2+) ions can be effectively intercalated into the interlayer spacing of nanostructured V2O5, enabling electrochemical magnesiation against a Mg anode with a specific capacity of 240 mAh/g. We employ HRTEM and X-ray fluorescence (XRF) imaging to understand the role of environment in the intercalation processes. A rebuilt full cell was tested by employing a high-energy ball-milled Sn alloy anode in acetonitrile with Mg(ClO4)2 salt. XRF microscopy reveals effective insertion of Mg ions throughout the V2O5 structure during discharge and removal of Mg ions during electrode charging, in agreement with the electrode capacity. We show using XANES and XRF microscopy that reversible Mg intercalation is limited by the anode capacity.

  6. LOW Mg/Si PLANETARY HOST STARS AND THEIR Mg-DEPLETED TERRESTRIAL PLANETS

    Energy Technology Data Exchange (ETDEWEB)

    Carter-Bond, Jade C.; O' Brien, David P. [Planetary Science Institute, 1700 E. Fort Lowell, Tucson, AZ 85719 (United States); Delgado Mena, Elisa; Israelian, Garik; Gonzalez Hernandez, Jonay I. [Instituto de Astrofisica de Canarias, 38200 La Laguna, Tenerife (Spain); Santos, Nuno C., E-mail: j.bond@unsw.edu.au [Centro de Astrofisica, Universidade do Porto, Rua das Estrelas, 4150-762 Porto (Portugal)

    2012-03-15

    Simulations have shown that a diverse range of extrasolar terrestrial planet bulk compositions are likely to exist based on the observed variations in host star elemental abundances. Based on recent studies, it is expected that a significant proportion of host stars may have Mg/Si ratios below 1. Here we examine this previously neglected group of systems. Planets simulated as forming within these systems are found to be Mg-depleted (compared to Earth), consisting of silicate species such as pyroxene and various feldspars. Planetary carbon abundances also vary in accordance with the host star C/O ratio. The predicted abundances are in keeping with observations of polluted white dwarfs, lending validity to this approach. Further studies are required to determine the full planetary impacts of the bulk compositions predicted here.

  7. Synthesis, crystal growth and structure of Mg containing β-rhombohedral boron: MgB17.4

    International Nuclear Information System (INIS)

    Adasch, Volker; Hess, Kai-Uwe; Ludwig, Thilo; Vojteer, Natascha; Hillebrecht, Harald

    2006-01-01

    For the first time, single crystals of Mg containing β-rhombohedral boron MgB 17.4 were synthesised from the elements in a Mg/Cu melt at 1600deg. C. The crystal structure determined by the refinement of single crystal data (space group R-3m, a=10.991(2)A, c=24.161(4)A, 890 reflections, 123 variables, R 1 (F)=0.049, wR 2 (I)=0.122) improves and modifies the former structure model derived from earlier investigations on powder samples. Mg is located on four different positions with partial occupation. While the occupation of the sites D (53.3%), E (91%) and F (7.2%) is already known from other boron-rich borides related to β-rhombohedral boron, the occupation of the fourth position (18h, 6.7%) is observed for the first time. Two boron positions show partial occupation. The summation reveals the composition MgB 17.4 and Mg 5.85 B 101.9 , respectively, confirmed by WDX measurements. The single crystals of MgB 17.4 show the highest Mg content ever found. Preliminary measurements indicate no superconductivity

  8. Preparation and Hydrogen Storage Properties of Mg-Rich Mg-Ni Ultrafine Particles

    Directory of Open Access Journals (Sweden)

    Jianxin Zou

    2012-01-01

    Full Text Available In the present work, Mg-rich Mg-Ni ultrafine powders were prepared through an arc plasma method. The phase components, microstructure, and hydrogen storage properties of the powders were carefully investigated. It is found that Mg2Ni and MgNi2 could be obtained directly from the vapor state reactions between Mg and Ni, depending on the local vapor content in the reaction chamber. A nanostructured MgH2 + Mg2NiH4 hydrogen storage composite could be generated after hydrogenation of the Mg-Ni ultrafine powders. After dehydrogenation, MgH2 and Mg2NiH4 decomposed into nanograined Mg and Mg2Ni, respectively. Thermogravimetry/differential scanning calorimetry (TG/DSC analyses showed that Mg2NiH4 phase may play a catalytic role in the dehydriding process of the hydrogenated Mg ultrafine particles.

  9. Comparative study of 250 mg/day terbinafine and 100 mg/day itraconazole for the treatment of cutaneous sporotrichosis.

    Science.gov (United States)

    Francesconi, Glaucia; Francesconi do Valle, Antonio Carlos; Passos, Sonia Lambert; de Lima Barros, Mônica Bastos; de Almeida Paes, Rodrigo; Curi, André Luiz Land; Liporage, José; Porto, Cássio Ferreira; Galhardo, Maria Clara Gutierrez

    2011-05-01

    Itraconazole is currently used for the treatment of cutaneous sporotrichosis. Terbinafine at a daily dose of 250 mg has been successfully applied to the treatment of cutaneous sporotrichosis. To compare the efficacy of 250 mg/day terbinafine and 100 mg/day itraconazole for the treatment of cutaneous sporotrichosis. A bidirectional cohort study was conducted on 55 patients receiving 250 mg/day terbinafine and 249 patients receiving 100 mg/day itraconazole. The latter patients were matched for age and clinical form to the terbinafine group at a ratio of 5:1. Sporothrix schenckii was isolated by culture from all patients (age range: 18-70 years), who were submitted to the standard care protocol consisting of clinical and laboratory evaluation and periodic visits. Cure was observed in 51 (92.7%) patients of the terbinafine group and 229 (92%) of the itraconazole group within a similar mean period of time (11.5 and 11.8 weeks, respectively). An increase in the terbinafine dose to 500 mg was necessary in two patients due to the lack of a response, and one patient presented recurrence. In the itraconazole group, two patients required a dose increase and three presented recurrence. Adverse events were equally frequent among patients receiving terbinafine (n = 4, 7.3%) and itraconazole (n = 19, 7.6%) and were generally mild without the need for drug discontinuation, except for two patients of the itraconazole group. Terbinafine administered at a daily dose of 250 mg is an effective and well-tolerated option for the treatment of cutaneous sporotrichosis.

  10. A Prevenção do HIV / AIDS segundo o olhar das mulheres: o caso do Grupo de Direitos Reprodutivos em Juiz de Fora / MGª La prevencíon del HIV/SIDA según el punto de vista de las mujeres: el caso del grupo de derechos reproductivos en Juiz de Fora / MG, Brasil HIV/AIDS prevention according to womens view: the reproductive rights group case in Juiz de Fora / MG, Brazil

    Directory of Open Access Journals (Sweden)

    Elenir Pereira de Paiva

    2006-08-01

    ção, as estatísticas indicam aumento significativo de mulheres infectadas pelo HIV. Os objetivos foram: 1 identificar as informações que as participantes do Grupo de Direitos Reprodutivos possuem sobre as formas de prevenção contra HIV/AIDS; 2 identificar estratégias de prevenção contra o HIV/AIDS que as mulheres do Grupo de Direitos Reprodutivos adotam em sua prática sexual; 3 analisar as formas de prevenção contra o HIV/AIDS adotadas pelas mulheres do Grupo de Direitos Reprodutivos no Departamento de Urgência e Emergência Norte (DUEN em Juiz de Fora- MG. Metodologia: privilegiou-se a pesquisa qualitativa, sob a forma de estudo de caso², oriundas do grupo de discussão mencionado. Para coleta de dados, empregou-se a entrevista semi-estruturada, juntamente com observação participante³ com registro em diário de campo. Os resultados sugerem que as participantes ainda mantêm perplexidades quanto às formas de transmissão do HIV, prosseguem representando a AIDS como doença perigosa e incurável4 e, a despeito de valorizarem o preservativo como mecanismo de prevenção, encontram resistência dos parceiros no que concerne ao uso do mesmo. O grupo refere não adotar métodos preventivos de forma contínua. Teorias de aprendizagem5 foram analisadas com o objetivo de conhecer em qual tipo de aprendiz estamos trabalhando. Ao final apresentam-se algumas considerações e sugestões, tendo em vista tornar mais efetivas as ações educativas nesta área da saúde pública.

  11. Synthesis and crystal structure of MgB12

    International Nuclear Information System (INIS)

    Adasch, Volker; Hess, Kai-Uwe; Ludwig, Thilo; Vojteer, Natascha; Hillebrecht, Harald

    2006-01-01

    Single crystals of MgB 12 were synthesized from the elements in a Mg/Cu melt at 1600deg. C. MgB 12 crystallizes orthorhombic in space group Pnma with a=16.632(3)A, b=17.803(4)A and c=10.396(2)A. The crystal structure (Z=30, 5796 reflections, 510 variables, R 1 (F)=0.049, wR 2 (I)=0.134) consists of a three dimensional net of B 12 icosahedra and B 21 units in a ratio 2:1. The B 21 units are observed for the first time in a solid compound. Mg is on positions with partial occupation. The summation reveals the composition MgB 12.35 or Mg 0.97 B 12 , respectively. This is in good agreement with the value of MgB 11.25 as expected by electronic reasons to stabilize the boron polyhedra B 12 2- and B 21 4-

  12. Comparison of the Effect of 800 mg Ibuprofen and 30 mg Predenisolone on Relief of Post Endodontic Pain

    Directory of Open Access Journals (Sweden)

    S.M. Jalalzadeh

    2009-04-01

    Full Text Available Introduction & Objective: One of the important problems in dentistry is post endodontic pains .The purpose of this study was comparison of the effect of prophylactic oral ibuprofen 800mg and oral predenisolone 30mg on prevention of post endodontic pain.Materials & Methods: The present study is a double-blind, randomized and controlled trial. It was conducted on 60 patient (16men and 44 women between the ages of 18-63 who needed endodontic treatment. Inclusive criteria for selecting of patients were: need for root canal therapy in one of the posterior teeth, having no systemic problem, no evidence of abscess; not taking analgesic or similar drug for at least 6 hours before treatment. Patients were divided into three experimental groups randomly taking one of the drugs before the treatment {ibuprofen 800 mg, prednisolone30mg and placebo (oral dextrose}. Patients completed VAS at 6,12 and 24 hours post root canal therapy and analyzed using the spss15 by chi-square, ANOVA test and Tukey test.Results: During 24 hours after treatment post endodontic pain is 95%- 100% in the placebo group. The prevalence of no-pain was not significant 6, 12 and 24 hours after treatment between the ibuprofen and predenisolone groups. The mean scale of pain in ibuprofen and predenisolone groups was significantly lower than placebo group 6, 12 and 24 hours after treatment. Differences between the drug groups are significant only on 6 and 12 hours after treatment.Conclusion: Post endodontic pains are present 24 hours after treatment. 6 and 12 hours after treatment 30 mg predenisolone are significantly better for pain relief than 800 mg ibuprofen. But after 24 hours it is not significant.

  13. Alterations of Mg2+ After Hemorrhagic Shock.

    Science.gov (United States)

    Lee, Mun-Young; Yang, Dong Kwon; Kim, Shang-Jin

    2017-11-01

    Hemorrhagic shock is generally characterized by hemodynamic instability with cellular hypoxia and diminishing cellular function, resulting from an imbalance between systemic oxygen delivery and consumption and redistribution of fluid and electrolytes. Magnesium (Mg) is the fourth most abundant cation overall and second most abundant intracellular cation in the body and an essential cofactor for the energy production and cellular metabolism. Data for blood total Mg (tMg; free-ionized, protein-bound, and anion-bound forms) and free Mg 2+ levels after a traumatic injury are inconsistent and only limited information is available on hemorrhagic effects on free Mg 2+ as the physiologically active form. The aim of this study was to determine changes in blood Mg 2+ and tMg after hemorrhage in rats identifying mechanism and origin of the changes in blood Mg 2+ . Hemorrhagic shock produced significant increases in blood Mg 2+ , plasma tMg, Na + , K + , Cl - , anion gap, partial pressures of oxygen, glucose, and blood urea nitrogen but significant decreases in RBC tMg, blood Ca 2+ , HCO 3 - , pH, partial pressures of carbon dioxide, hematocrit, hemoglobin, total cholesterol, and plasma/RBC ATP. During hemorrhagic shock, K + , anion gap, and BUN showed significant positive correlations with changes in blood Mg 2+ level, while Ca 2+ , pH, and T-CHO correlated to Mg 2+ in a negative manner. In conclusion, hemorrhagic shock induced an increase in both blood-free Mg 2+ and tMg, resulted from Mg 2+ efflux from metabolic damaged cell with acidosis and ATP depletion.

  14. Modeling and stabilities of Mg/MgH2 interfaces: A first-principles investigation

    Directory of Open Access Journals (Sweden)

    Jia-Jun Tang

    2014-07-01

    Full Text Available We have theoretically investigated the modeling and the structural stabilities of various Mg/MgH2 interfaces, i.e. Mg(101¯0/MgH2(210, Mg(0001/MgH2(101 and Mg(101¯0/MgH2(101, and provided illuminating insights into Mg/MgH2 interface. Specifically, the main factors, which impact the interfacial energies, are fully considered, including surface energies of two phases, mutual lattice constants of interface model, and relative position of two phases. The surface energies of Mg and MgH2, on the one hand, are found to be greatly impacting the interfacial energies, reflected by the lowest interfacial energy of Mg(0001/MgH2(101 which is comprised of two lowest energy surfaces. On the other hand, it is demonstrated that the mutual lattice constants and the relative position of two phases lead to variations of interfacial energies, thus influencing the interface stabilities dramatically. Moreover, the Mg-H bonding at interface is found to be the determinant of Mg/MgH2 interface stability. Lastly, interfacial and strain effects on defect formations are also studied, both of which are highly facilitating the defect formations. Our results provide a detailed insight into Mg/MgH2 interface structures and the corresponding stabilities.

  15. Catalytic mechanism of the dehydrogenation of ethylbenzene over Fe–Co/Mg(Al)O derived from hydrotalcites

    KAUST Repository

    Tope, Balkrishna B.; Balasamy, Rabindran J.; Khurshid, Alam; Atanda, Luqman A.; Yahiro, Hidenori; Shishido, Tetsuya; Takehira, Katsuomi; Al-Khattaf, Sulaiman S.

    2011-01-01

    -H+ abstraction from ethyl group on Mg2+-O2- basic sites, followed by C-O-Mg bond formation. The α-H+ abstraction by O2-(-Mg 2+) was likely followed by β-H abstraction, leading to the formations of styrene and H2. Such catalytic mechanism by the Fe 3+ acid-O2-(-Mg

  16. Transformation of Mg-bearing amorphous calcium carbonate to Mg-calcite - In situ monitoring

    Science.gov (United States)

    Purgstaller, Bettina; Mavromatis, Vasileios; Immenhauser, Adrian; Dietzel, Martin

    2016-02-01

    The formation of Mg-bearing calcite via an amorphous precursor is a poorly understood process that is of relevance for biogenic and abiogenic carbonate precipitation. In order to gain an improved insight on the controls of Mg incorporation in calcite formed via an Mg-rich amorphous calcium carbonate (Mg-ACC) precursor, the precipitation of Mg-ACC and its transformation to Mg-calcite was monitored by in situ Raman spectroscopy. The experiments were performed at 25.0 ± 0.03 °C and pH 8.3 ± 0.1 and revealed two distinct pathways of Mg-calcite formation: (i) At initial aqueous Mg/Ca molar ratios ⩽ 1:6, Mg-calcite formation occurs via direct precipitation from solution. (ii) Conversely, at higher initial Mg/Ca molar ratios, Mg-calcite forms via an intermediate Mg-rich ACC phase. In the latter case, the final product is a calcite with up to 20 mol% Mg. This Mg content is significant higher than that of the Mg-rich ACC precursor phase. Thus, a strong net uptake of Mg ions from the solution into the crystalline precipitate throughout and also subsequent to ACC transformation is postulated. Moreover, the temporal evolution of the geochemical composition of the reactive solution and the Mg-ACC has no significant effect on the obtained ;solubility product; of Mg-ACC. The enrichment of Mg in calcite throughout and subsequent to Mg-ACC transformation is likely affected by the high aqueous Mg/Ca ratio and carbonate alkalinity concentrations in the reactive solution. The experimental results have a bearing on the formation mechanism of Mg-rich calcites in marine early diagenetic environments, where high carbonate alkalinity concentrations are the rule rather than the exception, and on the insufficiently investigated inorganic component of biomineralisation pathways in many calcite secreting organisms.

  17. Atorvastatin 10 mg plus ezetimibe 10mg compared with atorvastatin 20 mg: impact on the lipid profile in Japanese patients with abnormal glucose tolerance and coronary artery disease.

    Science.gov (United States)

    Uemura, Yusuke; Watarai, Masato; Ishii, Hideki; Koyasu, Masayoshi; Takemoto, Kenji; Yoshikawa, Daiji; Shibata, Rei; Matsubara, Tatsuaki; Murohara, Toyoaki

    2012-01-01

    Oxidized low-density lipoprotein (LDL) cholesterol is a sensitive lipid marker for predicting atherosclerosis. Ezetimibe and statins are reported to decrease both LDL cholesterol and oxidized LDL cholesterol. This prospective randomized open-label crossover study compared combination therapy with atorvastatin plus ezetimibe versus high-dose atorvastatin monotherapy. Changes in serum lipids, including malondialdehyde-modified LDL (MDA-LDL) as a representative form of oxidized LDL cholesterol, and glucose metabolism were assessed. The subjects were 39 Japanese patients with coronary artery disease and type 2 diabetes or impaired glucose tolerance who were taking 10 mg/day of atorvastatin (30 men and 9 women with a mean age of 67.8 years). They were randomized to a group that first received add-on ezetimibe (10 mg/day) or a group that first received atorvastatin monotherapy at a higher dose of 20 mg/day. Both treatments were given for 12 weeks each in a crossover fashion. Add-on ezetimibe significantly decreased MDA-LDL (109.0 ± 31.9 mg/dl to 87.7 ± 29.4 mg/dl, p=0.0009), while up-titration of atorvastatin did not. The decrease with add-on ezetimibe was significantly greater than with up-titration of atorvastatin (p=0.0006). Total cholesterol and LDL cholesterol were significantly decreased by both treatments, but the percent reduction with add-on ezetimibe was significantly greater (pHigh-density lipoprotein cholesterol was significantly increased by both treatments and there was no significant difference between them. The apolipoprotein B/apolipoprotein A-I ratio and remnant-like particle cholesterol were only significantly decreased by add-on ezetimibe. Both treatments caused similar elevation of hemoglobin A(1c). In Japanese patients with type 2 diabetes or impaired glucose tolerance and coronary artery disease, adding ezetimibe (10 mg/day) to atorvastatin (10 mg/day) significantly improved the lipid profile compared with atorvastatin monotherapy at 20 mg

  18. Re-examining the 26Mg(α ,α')26Mg reaction: Probing astrophysically important states in 26Mg

    Science.gov (United States)

    Adsley, P.; Brümmer, J. W.; Li, K. C. W.; Marín-Lámbarri, D. J.; Kheswa, N. Y.; Donaldson, L. M.; Neveling, R.; Papka, P.; Pellegri, L.; Pesudo, V.; Pool, L. C.; Smit, F. D.; van Zyl, J. J.

    2017-11-01

    Background: The 22Ne(α ,n )25Mg reaction is one of the neutron sources for the s process in massive stars. The properties of levels in 26Mg above the α -particle threshold control the strengths of the 22Ne(α ,n )25Mg and 22Ne(α ,γ )26Mg reactions. The strengths of these reactions as functions of temperature are one of the major uncertainties in the s process. Purpose: Information on the existence, spin, and parity of levels in 26Mg can assist in constraining the strengths of the 22Ne(α ,γ )26Mg and 22Ne(α ,n )25Mg reactions, and therefore in constraining s -process abundances. Methods: Inelastically scattered α particles from a 26Mg target were momentum-analyzed in the K600 magnetic spectrometer at iThemba LABS, South Africa. The differential cross sections of states were deduced from the focal-plane trajectory of the scattered α particles. Based on the differential cross sections, spin and parity assignments to states are made. Results: A newly assigned 0+ state was observed in addition to a number of other states, some of which can be associated with states observed in other experiments. Some of the deduced Jπ values of the states observed in the present study show discrepancies with those assigned in a similar experiment performed at RCNP Osaka. The reassignments and additions of the various states can strongly affect the reaction rate at low temperatures. Conclusion: The number, location, and assignment of levels in 26Mg that may contribute to the 22Ne+α reactions are not clear. Future experimental investigations of 26Mg must have an extremely good energy resolution to separate the contributions from different levels. Coincidence experiments of 26Mg provide a possible route for future investigations.

  19. Antibacterial biodegradable Mg-Ag alloys

    Directory of Open Access Journals (Sweden)

    D Tie

    2013-06-01

    Full Text Available The use of magnesium alloys as degradable metals for biomedical applications is a topic of ongoing research and the demand for multifunctional materials is increasing. Hence, binary Mg-Ag alloys were designed as implant materials to combine the favourable properties of magnesium with the well-known antibacterial property of silver. In this study, three Mg-Ag alloys, Mg2Ag, Mg4Ag and Mg6Ag that contain 1.87 %, 3.82 % and 6.00 % silver by weight, respectively, were cast and processed with solution (T4 and aging (T6 heat treatment.The metallurgical analysis and phase identification showed that all alloys contained Mg4Ag as the dominant β phase. After heat treatment, the mechanical properties of all Mg-Ag alloys were significantly improved and the corrosion rate was also significantly reduced, due to presence of silver. Mg(OH2 and MgO present the main magnesium corrosion products, while AgCl was found as the corresponding primary silver corrosion product. Immersion tests, under cell culture conditions, demonstrated that the silver content did not significantly shift the pH and magnesium ion release. In vitro tests, with both primary osteoblasts and cell lines (MG63, RAW 264.7, revealed that Mg-Ag alloys show negligible cytotoxicity and sound cytocompatibility. Antibacterial assays, performed in a dynamic bioreactor system, proved that the alloys reduce the viability of two common pathogenic bacteria, Staphylococcus aureus (DSMZ 20231 and Staphylococcus epidermidis (DSMZ 3269, and the results showed that the killing rate of the alloys against tested bacteria exceeded 90%. In summary, biodegradable Mg-Ag alloys are cytocompatible materials with adjustable mechanical and corrosion properties and show promising antibacterial activity, which indicates their potential as antibacterial biodegradable implant materials.

  20. Intra-individual comparison of different contrast media concentrations (300 mg, 370 mg and 400 mg iodine) in MDCT

    Energy Technology Data Exchange (ETDEWEB)

    Behrendt, Florian F.; Keil, Sebastian; Plumhans, Cedric; Guenther, Rolf W. [RWTH Aachen University, Department of Diagnostic Radiology, University Hospital, Aachen (Germany); Pietsch, Hubertus; Jost, Gregor; Sieber, Martin A.; Seidensticker, Peter [Bayer Schering Pharma AG, Berlin (Germany); Mahnken, Andreas H. [RWTH Aachen University, Department of Diagnostic Radiology, University Hospital, Aachen (Germany); RWTH Aachen University, Applied Medical Engineering, Helmholtz-Institute for Biomedical Engineering, Aachen (Germany)

    2010-07-15

    To compare intra-individual contrast enhancement in multi-detector-row computed tomography (MDCT) using contrast media (CM) containing 300, 370 and 400 mg iodine per ml (mgI/ml). Six pigs underwent repeated chest MDCT using three different CM (iopromide 300, iopromide 370, iomeprol 400). An identical iodine delivery (IDR) rate of 1.5 gI/s and a constant total iodine dose of 300 mg/kg body weight were used. Dynamic CT were acquired at the level of the pulmonary artery, and the ascending and descending aorta. After the time enhancement curves were computed, the pulmonary and aortic peak enhancement, time to peak and plateau time above 300 HU were calculated. Intra-individual peak contrast enhancement was significantly higher for the 300 mgI/ml contrast medium compared with the 370 and 400 mgI/ml media: pulmonary trunk 595 HU vs 516 HU (p = 0.0093) vs 472HU (p = 0.0005), and aorta 505 HU vs 454 HU (p = 0.0008) vs 439 HU (p = 0.0001), respectively. Comparison of time to peaks showed no significant difference. Plateau times were significantly longer for the 300 mgI/ml than for the 370 and 400 mgI/ml CM at all anatomical sites. Given normalised IDR and total iodine burden, the use of CM with a standard concentration with 300 mg iodine/ml provides improved contrast enhancement compared with highly concentrated CM in the chest. (orig.)

  1. Comparison of the effects of esomeprazole 40 mg, rabeprazole 20 mg, lansoprazole 30 mg, and pantoprazole 40 mg on intragastrıc pH in extensive metabolizer patients with gastroesophageal reflux disease.

    Science.gov (United States)

    Çelebi, Altay; Aydın, Dinçer; Kocaman, Orhan; Konduk, Buğra Tolga; Şentürk, Ömer; Hülagü, Sadetin

    2016-09-01

    Studies on the therapeutic efficacy of proton pump inhibitors (PPIs) in patients with gastroesophageal reflux disease (GERD) have been recently published. In most of these studies, comparison of only two PPIs have been made. There are few studies on the comparison of four or more PPIs. We aimed to compare the acid inhibitory effects of esomeprazole 40 mg, rabeprazole 20 mg, lansoprazole 30 mg, and pantoprazole 40 mg on days 1 and 5 of treatment in patients with GERD, who were extensive metabolizers in regard to the CYP2C19 genotype. Helicobacter pylori-negative with typical symptoms of GERD patients were randomly divided into four treatment groups. Efficacy analysis on days 1 and 5 were performed on the four groups which comprised 10 (esomeprazole), 11 (rabeprazole), 10 (lansoprazole), and 10 (pantoprazole) patients. On day 1 of PPI treatment, the mean percentage of time with intragastric Ph>4 were 54%, 58%, 60%, and 35% for the groups, respectively, and on day 5, these values were 67%, 60%, 68%, and 59%, respectively. Esomeprazole, rabeprazole, and lansoprazole were found to be superior to pantoprazole on the first day of treatment. Pantoprazole is a less potent proton pump inhibitor than the other PPIs tested on the first day of treatment. When the time needed to raise the intragatric pH to over 4 was evaluated, esomeprazole was found to have the most rapid action, followed by lansoprazole and rabeprazole.

  2. Luminescence and paramagnetic centers in antigorite and Lizardite, two members of serpentine group: a comparative study;Estudo comparativo entre as propriedades dos centros luminescentes e paramagneticos da antigorita e da lizardita do grupo da SERPENTINA: Mg{sub 3} [Si{sub 2}O{sub 5}] (OH){sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Rocca, Rene Rojas, E-mail: renerr@usp.b

    2008-07-01

    In this work, we are describing crystals luminescent properties of Antigorite (monoclinic, Mg{sub 3-x}[Si{sub 2}O{sub 5}](OH){sub 4-2x}) and Lizardite (triclinic, Mg{sub 3}[(Si,Fe){sub 2}O{sub 5}](OH){sub 4}). They were studied simultaneously applying several techniques, like: Thermoluminescence (TL), Optical Absorption (OA), Electron Paramagnetic Resonance (EPR), X-rays diffraction and Inductively Coupled Plasma (ICP). Using cold pressed elements and heating the samples to 350 deg C for TL measurements, we can observe reproductive peaks. Antigorita show well differentiated peaks and intensities, but Lizardite show overlapped and similar intensity peaks. Peaks of both samples occur around 150, 200, 250, 300 deg C, and all them grow linearly up to 2 kGy, saturating for high doses, except 250 deg C peak which continue growing with dose until 172 kGy. TL peaks trap parameters and lifetimes were calculated, the curves were fitted using the GCD method with second order kinetic. The EPR spectrum shows 6 hyperfine structure lines, characteristic of Manganese, besides lines due to Iron. It was possible also to observe two super hyperfine Mn{sup 2+} lines. The EPR signal does not change with irradiation dose in both crystals. These impurities were also detected in the ICP analysis. The OA spectrum of lizardite show bands from 370 to 470 nm which were not observed in antigorite samples probably related to Fe{sup 3+} and Mn{sup 2+}. In the infrared region several (OA) bands of Mg-OH combination were observed. Again the OA spectrum of these crystals does not change with irradiation dose. We conclude that TL samples peaks around 150, 200, 250, 300 deg C can be used for radiation ionizing dosimetry (y-rays and B- particle) for intermediate and high doses. (author)

  3. The effect of the MgO buffer layer thickness on magnetic anisotropy in MgO/Fe/Cr/MgO buffer/MgO(001)

    Energy Technology Data Exchange (ETDEWEB)

    Kozioł-Rachwał, Anna, E-mail: a.koziolrachwal@aist.go.jp [National Institute of Advanced Industrial Science and Technology, Spintronics Research Center, Tsukuba, Ibaraki 305-8568 (Japan); AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, al. Mickiewicza 30, 30-059 Kraków (Poland); Nozaki, Takayuki; Zayets, Vadym; Kubota, Hitoshi; Fukushima, Akio; Yuasa, Shinji [National Institute of Advanced Industrial Science and Technology, Spintronics Research Center, Tsukuba, Ibaraki 305-8568 (Japan); Suzuki, Yoshishige [National Institute of Advanced Industrial Science and Technology, Spintronics Research Center, Tsukuba, Ibaraki 305-8568 (Japan); Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama, Toyonaka, Osaka 560-8531 (Japan)

    2016-08-28

    The relationship between the magnetic properties and MgO buffer layer thickness d was studied in epitaxial MgO/Fe(t)/Cr/MgO(d) layers grown on MgO(001) substrate in which the Fe thickness t ranged from 0.4 nm to 1.1 nm. For 0.4 nm ≤ t ≤ 0.7 nm, a non-monotonic coercivity dependence on the MgO buffer thickness was shown by perpendicular magneto-optic Kerr effect magnetometry. For thicker Fe films, an increase in the buffer layer thickness resulted in a spin reorientation transition from perpendicular to the in-plane magnetization direction. Possible origins of these unusual behaviors were discussed in terms of the suppression of carbon contamination at the Fe surface and changes in the magnetoelastic anisotropy in the system. These results illustrate a method to control magnetic anisotropy in MgO/Fe/Cr/MgO(d) via an appropriate choice of MgO buffer layer thickness d.

  4. Ultraviolet spectra of Mg in liquid helium

    International Nuclear Information System (INIS)

    Moriwaki, Y.; Morita, N.

    1999-01-01

    Emission and absorption spectra of Mg atoms implanted in liquid helium have been observed in the ultraviolet region. We have presented a model of exciplex formation of Mg-He 10 and found that this model is more suitable for understanding the dynamics in the 3s3p 1 P→3s 21 S transition than the bubble model. (orig.)

  5. Mg co-ordination with potential carcinogenic molecule acrylamide: Spectroscopic, computational and cytotoxicity studies

    Science.gov (United States)

    Singh, Ranjana; Mishra, Vijay K.; Singh, Hemant K.; Sharma, Gunjan; Koch, Biplob; Singh, Bachcha; Singh, Ranjan K.

    2018-03-01

    Acrylamide (acr) is a potential toxic molecule produced in thermally processed food stuff. Acr-Mg complex has been synthesized chemically and characterized by spectroscopic techniques. The binding sites of acr with Mg were identified by experimental and computational methods. Both experimental and theoretical results suggest that Mg coordinated with the oxygen atom of Cdbnd O group of acr. In-vitro cytotoxicity studies revealed significant decrease in the toxic level of acr-Mg complex as compared to pure acr. The decrease in toxicity on complexation with Mg may be a useful step for future research to reduce the toxicity of acr.

  6. Loss of Endothelial Barrier in Marfan Mice (mgR/mgR Results in Severe Inflammation after Adenoviral Gene Therapy.

    Directory of Open Access Journals (Sweden)

    Philipp Christian Seppelt

    Full Text Available Marfan syndrome is an autosomal dominant inherited disorder of connective tissue. The vascular complications of Marfan syndrome have the biggest impact on life expectancy. The aorta of Marfan patients reveals degradation of elastin layers caused by increased proteolytic activity of matrix metalloproteinases (MMPs. In this study we performed adenoviral gene transfer of human tissue inhibitor of matrix metalloproteinases-1 (hTIMP-1 in aortic grafts of fibrillin-1 deficient Marfan mice (mgR/mgR in order to reduce elastolysis.We performed heterotopic infrarenal transplantation of the thoracic aorta in female mice (n = 7 per group. Before implantation, mgR/mgR and wild-type aortas (WT, C57BL/6 were transduced ex vivo with an adenoviral vector coding for human TIMP-1 (Ad.hTIMP-1 or β-galactosidase (Ad.β-Gal. As control mgR/mgR and wild-type aortas received no gene therapy. Thirty days after surgery, overexpression of the transgene was assessed by immunohistochemistry (IHC and collagen in situ zymography. Histologic staining was performed to investigate inflammation, the neointimal index (NI, and elastin breaks. Endothelial barrier function of native not virus-exposed aortas was evaluated by perfusion of fluorescent albumin and examinations of virus-exposed tissue were performed by transmission electron microscopy (TEM.IHC and ISZ revealed sufficient expression of the transgene. Severe cellular inflammation and intima hyperplasia were seen only in adenovirus treated mgR/mgR aortas (Ad.β-Gal, Ad.hTIMP-1 NI: 0.23; 0.43, but not in native and Ad.hTIMP-1 treated WT (NI: 0.01; 0.00. Compared to native mgR/mgR and Ad.hTIMP-1 treated WT aorta, the NI is highly significant greater in Ad.hTIMP-1 transduced mgR/mgR aorta (p = 0.001; p = 0.001. As expected, untreated Marfan grafts showed significant more elastolysis compared to WT (p = 0.001. However, elastolysis in Marfan aortas was not reduced by adenoviral overexpression of hTIMP-1 (compared to untreated

  7. The effect of different dialyzer membrane on the clearance of serum β2-MG in maintenance hemodialysis patients

    International Nuclear Information System (INIS)

    Lu Yun; Xue Jun; Lin Xiangtong; Deng Shouzhen; Li Ding

    2001-01-01

    Objective: To investigate the effect of different membrane on the clearance of serum β 2 -MG in maintenance hemodialysis patients. Method: 106 maintenance hemodialysis patients randomized divided into group A and group B. Group A used cellulose triacetate membrane (N-130E), Group B used polysulfone membrane (F6). The levels of serum β 2 -MG before and after hemodialysis were compared in Group A and B, respectively. Results: Before hemodialysis, the level of serum β 2 -MG was not significant different between Group A and B (46.74 ± 19.46 mg/L vs 47.49 ± 16.71 mg/L, P>0.05). In Group A, compared with that before hemodialysis, the level of serum β 2 -MG after hemodialysis decreased significantly. (46.74±19.46 mg/L vs 39.76 ±17.66 mg/L, before HD vs after HD, P 2 -MG between before and after hemodialysis (47.49±16.71 mg/L vs 50.19±22.76 mg/L, P>0.05). Conclusion: N-130E dialyzer is better than F6 dialyzer as the effect of clearance serum β 2 -MG is concerned

  8. Group X

    Energy Technology Data Exchange (ETDEWEB)

    Fields, Susannah

    2007-08-16

    This project is currently under contract for research through the Department of Homeland Security until 2011. The group I was responsible for studying has to remain confidential so as not to affect the current project. All dates, reference links and authors, and other distinguishing characteristics of the original group have been removed from this report. All references to the name of this group or the individual splinter groups has been changed to 'Group X'. I have been collecting texts from a variety of sources intended for the use of recruiting and radicalizing members for Group X splinter groups for the purpose of researching the motivation and intent of leaders of those groups and their influence over the likelihood of group radicalization. This work included visiting many Group X websites to find information on splinter group leaders and finding their statements to new and old members. This proved difficult because the splinter groups of Group X are united in beliefs, but differ in public opinion. They are eager to tear each other down, prove their superiority, and yet remain anonymous. After a few weeks of intense searching, a list of eight recruiting texts and eight radicalizing texts from a variety of Group X leaders were compiled.

  9. Wound healing effect of bioactive ion released from Mg-smectite.

    Science.gov (United States)

    Sasaki, Yu; Sathi, Gulsan Ara; Yamamoto, Osamu

    2017-08-01

    Bioactive ions like Mg 2+ and Si 4+ have been known as promotion factors of tissue regeneration. In the present work, Mg-smectite, consisting of Mg 2+ and Si 4+ ions, was synthesized by a solution process, and evaluated for the efficiency of the powder on wound healing in rats. White precipitates were obtained by mixing a magnesium chloride hexahydrate solution and a sodium silicate hexahydrate solution at room temperature. The precipitates mixed with a NaOH aqueous solution were subjected to hydrothermal reaction, and finally crystalline Mg-smectite powder was obtained. The crystal and molecular structure of Mg-smectite was identified by X-ray diffractometry (XRD) and Fourier-transform infrared spectroscopy (FT-IR). The synthesized material was determined to be crystalline Mg-smectite. The amount of Mg 2+ and Si 4+ ions released from Mg-smectite in physiological saline was analyzed by inductively coupled plasma mass spectroscopy (ICP-MS). The total amount of Si 4+ ion released from Mg-smectite was greater than that of Mg 2+ ion. To evaluate the wound healing effect of Mg-smectite, Mg-smectite powder was applied to a full-thickness surgical wound reaching the subcutaneous tissue in the rat's abdomen. At 1 and 2weeks, skin tissue was collected and subjected to histological analysis. The results for skin regeneration showed no significant difference in wound size between the control and Mg-smectite group. However, it was found that the neovascularization, collagen deposition, and maturation were notedly accelerated by applying Mg-smectite powder in comparison with the control. Mg-smectite can then be hypothesized to stimulate the regeneration of skin tissue by releasing Mg 2+ and Si 4+ ions. These results suggested that Mg-smectite could offer great potential as a wound dressing material. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Group Flow and Group Genius

    Science.gov (United States)

    Sawyer, Keith

    2015-01-01

    Keith Sawyer views the spontaneous collaboration of group creativity and improvisation actions as "group flow," which organizations can use to function at optimum levels. Sawyer establishes ideal conditions for group flow: group goals, close listening, complete concentration, being in control, blending egos, equal participation, knowing…

  11. Optical absorption and thermoluminescence in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature

    International Nuclear Information System (INIS)

    Delgado, L.

    1984-01-01

    Optical absorption and thermoluminescence (TL) studies in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature are presented. In pure Mg O the thermal annihilation of Fe3+ by recombination with thermally released electrons at ∼ 90 and 175 degree centigree and the V center annealing by hole release up to 100 degree centigree cause the observed glow peaks at these temperatures. The TL excitation spectrum shows two maxima at 245 nm (electron center) and 288 nm (Fe3+). In Mg O:Ni X irradiation induces Fe 2 + →- Fe 3 + and Ni 2 + → Ni 3 + oxidations. Two TL emission bands centered at 110 degree centigree (red) and 80 o C (green) are assigned to electron release and their recombination at Fe 3 + and Ni 3 + respectively. In Mg O:Li two TL emission bands, one blue (430 nm) and the other red (730 nm) with excitation maxima at 245 nm (electron center) and 200 nm (hole center) respectively are observed. No V-center formation was detected in both Ni and Li doped samples. (Author) 42 refs

  12. Permutation groups

    CERN Document Server

    Passman, Donald S

    2012-01-01

    This volume by a prominent authority on permutation groups consists of lecture notes that provide a self-contained account of distinct classification theorems. A ready source of frequently quoted but usually inaccessible theorems, it is ideally suited for professional group theorists as well as students with a solid background in modern algebra.The three-part treatment begins with an introductory chapter and advances to an economical development of the tools of basic group theory, including group extensions, transfer theorems, and group representations and characters. The final chapter feature

  13. Superconductivity in MgB{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Muranaka, Takahiro; Akimitsu, Jun [Aoyama Gakuin Univ., Kanagawa (Japan). Dept. of Physics and Mathematics

    2011-07-01

    We review superconductivity in MgB{sub 2} in terms of crystal and electronic structure, electron-phonon coupling, two-gap superconductivity and application. Finally, we introduce the development of new superconducting materials in related compounds. (orig.)

  14. Additive Manufacturing of Magnesium (Mg) Alloys

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed work is to investigate additive manufacturing techniques for Mg alloys.  It will leverage off research being conducted at University of Florida and...

  15. Chondrogenic differentiation of ATDC5-cells under the influence of Mg and Mg alloy degradation.

    Science.gov (United States)

    Martinez Sanchez, Adela H; Feyerabend, Frank; Laipple, Daniel; Willumeit-Römer, Regine; Weinberg, Annelie; Luthringer, Bérengère J C

    2017-03-01

    Biodegradable magnesium (Mg)-based materials are a potential alternative to permanent implants for application in children. Nevertheless effects of those materials on growth plate cartilage and chondrogenesis have not been previously evaluated. In vitro differentiation of ATDC5 cells was evaluated under the influence of pure Mg (PMg), Mg with 10wt% of gadolinium (Mg-10Gd) and Mg with 2wt% of silver (Mg-2Ag) degradation products (extracts) and direct cell culture on the materials. Gene expression showed an inhibitory effect on ATDC5 mineralization with the three extracts and a chondrogenic potential of Mg-10Gd. Cells cultured in Mg-10Gd and Mg-2Ag extracts showed the same proliferation and morphology than cells cultured in growth conditions. Mg-10Gd induced an increase in production of ECM and a bigger cell size, similar to the effects found with differentiation conditions. An increased metabolic activity was observed in cells cultured under the influence of Mg-10Gd extracts, indicated by an acidic pH during most of the culture period. After 7days of culture on the materials, ATDC5 growth, distribution and ECM synthesis were higher on Mg-10Gd samples, followed by Mg-2Ag and PMg, which was influenced by the homogeneity and composition of the degradation layer. This study confirmed the tolerance of ATDC5 cells to Mg-based materials and a chondrogenic effect of Mg-10Gd. Further studies in vitro and in vivo are necessary to evaluate cell reactions to those materials, as well as the effects on bone growth and the biocompatibility of the alloying system in the body. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Mg/Ca of Continental Ostracode Shells

    Science.gov (United States)

    Ito, E.; Forester, R. M.; Marco-Barba, J.; Mezquita, F.

    2007-12-01

    Marine ionic chemistry is thought to remain constant. This, together with the belief that marine calcifiers partition Mg/Ca in a systematic manner as functions of temperature (and Mg/Ca) of water forms the basis of the Mg/Ca thermometer. In continental settings both of these assumptions are usually not true. Continental waters contain a wide variety of solutes in absolute and relative ion concentrations. Hence, waters with identical Mg/Ca may have very different concentrations of Mg and Ca and very different anions. Here we use two examples to focus on the effects of ion chemistry on Mg/Ca partitioning in continental ostracode shells and we ignore the complexities of solute evolution, which can change Mg/Ca over timescales of minutes to millennia. Palacios-Fest and Dettman (2001) conducted a monthly study of ,Cypridopsis vidua at El Yeso Lake in Sonora, Mexico. They established a relation between temperature and average shell Mg/Ca using regression analyses on averaged data. When their Mg/Ca-temperature relation is applied to monthly ,C. vidua data from Page Pond near Cleveland, Ohio, water temperatures of -8 to -1°C are obtained. The observed Mg/Ca ranges for El Yeso Lake (0.31 to 0.46) and Page Pond (0.33 to 0.46) are similar, as are their specific conductivities (700 to 850μS for El Yeso Lake; 400 to 600μS for Page Pond). However, [Ca] is 140-260 mg/L for El Yeso, but only 70-90 mg/L for Page Pond. Page Pond data, in fact, shows a good temperature shell Mg/Ca relation for .C. vidua, but the relation is different from that at El Yeso. Hence, shell Mg/Ca is a multi-valued, family of curves function of temperature and Mg/Ca of water that depends on the [Mg] and [Ca] values in water and perhaps other factors. Our second example comes from sites near Valencia, Spain and involves shell data for ,Cyprideis torosa, an estuarine ostracode that is tolerant of a wide range of salinity and can live in continental waters as long as the carbonate alkalinity to Ca ratio is

  17. Prussian Blue Mg-Li Hybrid Batteries.

    Science.gov (United States)

    Sun, Xiaoqi; Duffort, Victor; Nazar, Linda F

    2016-08-01

    The major advantage of Mg batteries relies on their promise of employing an Mg metal negative electrode, which offers much higher energy density compared to graphitic carbon. However, the strong coulombic interaction of Mg 2+ ions with anions leads to their sluggish diffusion in the solid state, which along with a high desolvation energy, hinders the development of positive electrode materials. To circumvent this limitation, Mg metal negative electrodes can be used in hybrid systems by coupling an Li + insertion cathode through a dual salt electrolyte. Two "high voltage" Prussian blue analogues (average 2.3 V vs Mg/Mg 2+ ; 3.0 V vs Li/Li + ) are investigated as cathode materials and the influence of structural water is shown. Their electrochemical profiles, presenting two voltage plateaus, are explained based on the two unique Fe bonding environments. Structural water has a beneficial impact on the cell voltage. Capacities of 125 mAh g -1 are obtained at a current density of 10 mA g -1 (≈C/10), while stable performance up to 300 cycles is demonstrated at 200 mA g -1 (≈2C). The hybrid cell design is a step toward building a safe and high density energy storage system.

  18. Group devaluation and group identification

    NARCIS (Netherlands)

    Leach, C.W.; Rodriguez Mosquera, P.M.; Vliek, M.L.W.; Hirt, E.

    2010-01-01

    In three studies, we showed that increased in-group identification after (perceived or actual) group devaluation is an assertion of a (preexisting) positive social identity that counters the negative social identity implied in societal devaluation. Two studies with real-world groups used order

  19. Lie groups and algebraic groups

    Indian Academy of Sciences (India)

    We give an exposition of certain topics in Lie groups and algebraic groups. This is not a complete ... of a polynomial equation is equivalent to the solva- bility of the equation ..... to a subgroup of the group of roots of unity in k (in particular, it is a ...

  20. Formation and Corrosion Resistance of Mg-Al Hydrotalcite Film on Mg-Gd-Zn Alloy

    Science.gov (United States)

    Ba, Z. X.; Dong, Q. S.; Kong, S. X.; Zhang, X. B.; Xue, Y. J.; Chen, Y. J.

    2017-06-01

    An environment-friendly technique for depositing a Mg-Al hydrotalcite (HT) (Mg6Al2(OH)16-CO3ṡ4H2O) conversion film was developed to protect the Mg-Gd-Zn alloy from corrosion. The morphology and chemical compositions of the film were analyzed by scanning electronic microscope (SEM) equipped with energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and Raman spectroscopy (RS), respectively. The electrochemical test and hydrogen evolution test were employed to evaluate the biocorrosion behavior of Mg-Gd-Zn alloy coated with the Mg-Al HT film in the simulated body fluid (SBF). It was found that the formation of Mg-Al HT film was a transition from amorphous precursor to a crystalline HT structure. The HT film can effectively improve the corrosion resistance of magnesium alloy. It indicates that the process provides a promising approach to modify Mg-Gd-Zn alloy.

  1. Microstructural evolution in Mg-rich Mg-Zn-Y alloys

    International Nuclear Information System (INIS)

    Biswas, T.; Ranganathan, S.; Nair, S.; Bajargan, G.

    2005-01-01

    Mg-rich Mg-Zn-Y alloys with nominal compositions Mg 97 Zn 1 Y 2 , Mg 97 Zn 2 Y 1 , Mg 92 Zn 6.5 Y 1.5 and Mg 97-x Zn 1 Y 2 Zr x have been chosen for the present study. These alloys are prepared by using sand casting mold. The sand cast alloys are remelted and subjected to copper mold casting and melt spinning techniques. The effect of cooling rate on microstructures was studied. It is observed that the size of the precipitates decreases with an increase of cooling rate. The formation of nano precipitates results in higher strength of the alloy as compared to the conventional alloys. The microstructures of melt spun ribbons are compared with RS/PM (rapidly solidified power metallurgy) Mg 97 Zn 1 Y 2 alloy, obtained from a different source. (author)

  2. Melting relations in the MgO-MgSiO3 system up to 70 GPa

    Science.gov (United States)

    Ohnishi, Satoka; Kuwayama, Yasuhiro; Inoue, Toru

    2017-06-01

    Melting experiments in a binary system MgO-MgSiO3 were performed up to 70 GPa using a CO2 laser heated diamond anvil cell. The quenched samples were polished and analyzed by a dualbeam focused ion beam (FIB) and a field emission scanning electron microscope (FE-SEM), respectively. The liquidus phase and the eutectic composition were determined on the basis of textual and chemical analyses of sample cross sections. Our experimental results show that the eutectic composition is the Si/Mg molar ratio of 0.76 at 35 GPa and it decreases with increasing pressure. Above 45 GPa, it becomes relatively constant at about 0.64-0.65 Si/Mg molar ratio. Using our experimental data collected at a wide pressure range up to 70 GPa together with previous experimental data, we have constructed a thermodynamic model of the eutectic composition of the MgO-MgSiO3 system. The eutectic composition extrapolated to the pressure and temperature conditions at the base of the mantle is about 0.64 Si/Mg molar ratio. The modeled eutectic composition is quite consistent with a previous prediction from ab initio calculations (de Koker et al. in Earth Planet Sci Lett 361:58-63, 2013), suggesting that the simple assumption of a non-ideal regular solution model can well describe the melting relation of the MgO-MgSiO3 system at high pressure. Our results show that the liquidus phase changes from MgO-periclase to MgSiO3-bridgmanite at 35 GPa for the simplified pyrolite composition ( 0.7 Si/Mg molar ratio), while MgSiO3-bridgmanite is the liquidus phase at the entire lower mantle conditions for the chondritic composition ( 0.84 Si/Mg molar ratio).

  3. Chondrogenic differentiation of ATDC5-cells under the influence of Mg and Mg alloy degradation

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Sanchez, Adela H., E-mail: adela.martinez@hzg.de [Helmholtz-Zentrum Geesthacht, Institute of Material Research, Department for Structural Research on Macromolecules, Geesthacht (Germany); Feyerabend, Frank; Laipple, Daniel; Willumeit-Römer, Regine [Helmholtz-Zentrum Geesthacht, Institute of Material Research, Department for Structural Research on Macromolecules, Geesthacht (Germany); Weinberg, Annelie [Department of Orthopedics and Orthopedic Surgery, Medical University of Graz (Austria); Luthringer, Bérengère J.C. [Helmholtz-Zentrum Geesthacht, Institute of Material Research, Department for Structural Research on Macromolecules, Geesthacht (Germany)

    2017-03-01

    Biodegradable magnesium (Mg)-based materials are a potential alternative to permanent implants for application in children. Nevertheless effects of those materials on growth plate cartilage and chondrogenesis have not been previously evaluated. In vitro differentiation of ATDC5 cells was evaluated under the influence of pure Mg (PMg), Mg with 10 wt% of gadolinium (Mg-10Gd) and Mg with 2 wt% of silver (Mg-2Ag) degradation products (extracts) and direct cell culture on the materials. Gene expression showed an inhibitory effect on ATDC5 mineralization with the three extracts and a chondrogenic potential of Mg-10Gd. Cells cultured in Mg-10Gd and Mg-2Ag extracts showed the same proliferation and morphology than cells cultured in growth conditions. Mg-10Gd induced an increase in production of ECM and a bigger cell size, similar to the effects found with differentiation conditions. An increased metabolic activity was observed in cells cultured under the influence of Mg-10Gd extracts, indicated by an acidic pH during most of the culture period. After 7 days of culture on the materials, ATDC5 growth, distribution and ECM synthesis were higher on Mg-10Gd samples, followed by Mg-2Ag and PMg, which was influenced by the homogeneity and composition of the degradation layer. This study confirmed the tolerance of ATDC5 cells to Mg-based materials and a chondrogenic effect of Mg-10Gd. Further studies in vitro and in vivo are necessary to evaluate cell reactions to those materials, as well as the effects on bone growth and the biocompatibility of the alloying system in the body. - Highlights: • Degradation of PMg, and Mg-2Ag do not influence ATDC5 cells growth and chondrogenic redifferentiation. • Mg-10Gd enhances fast chondrogenic redifferentiation and expression of hyperthrophic markers on ATDC5 cells. • Further evaluation of the effects of PMg, Mg-10Gd and Mg-2Ag in vivo are necessary to confirm its potential for application in growing bones.

  4. Chondrogenic differentiation of ATDC5-cells under the influence of Mg and Mg alloy degradation

    International Nuclear Information System (INIS)

    Martinez Sanchez, Adela H.; Feyerabend, Frank; Laipple, Daniel; Willumeit-Römer, Regine; Weinberg, Annelie; Luthringer, Bérengère J.C.

    2017-01-01

    Biodegradable magnesium (Mg)-based materials are a potential alternative to permanent implants for application in children. Nevertheless effects of those materials on growth plate cartilage and chondrogenesis have not been previously evaluated. In vitro differentiation of ATDC5 cells was evaluated under the influence of pure Mg (PMg), Mg with 10 wt% of gadolinium (Mg-10Gd) and Mg with 2 wt% of silver (Mg-2Ag) degradation products (extracts) and direct cell culture on the materials. Gene expression showed an inhibitory effect on ATDC5 mineralization with the three extracts and a chondrogenic potential of Mg-10Gd. Cells cultured in Mg-10Gd and Mg-2Ag extracts showed the same proliferation and morphology than cells cultured in growth conditions. Mg-10Gd induced an increase in production of ECM and a bigger cell size, similar to the effects found with differentiation conditions. An increased metabolic activity was observed in cells cultured under the influence of Mg-10Gd extracts, indicated by an acidic pH during most of the culture period. After 7 days of culture on the materials, ATDC5 growth, distribution and ECM synthesis were higher on Mg-10Gd samples, followed by Mg-2Ag and PMg, which was influenced by the homogeneity and composition of the degradation layer. This study confirmed the tolerance of ATDC5 cells to Mg-based materials and a chondrogenic effect of Mg-10Gd. Further studies in vitro and in vivo are necessary to evaluate cell reactions to those materials, as well as the effects on bone growth and the biocompatibility of the alloying system in the body. - Highlights: • Degradation of PMg, and Mg-2Ag do not influence ATDC5 cells growth and chondrogenic redifferentiation. • Mg-10Gd enhances fast chondrogenic redifferentiation and expression of hyperthrophic markers on ATDC5 cells. • Further evaluation of the effects of PMg, Mg-10Gd and Mg-2Ag in vivo are necessary to confirm its potential for application in growing bones.

  5. Randomised clinical trial: daily pantoprazole magnesium 40 mg vs. esomeprazole 40 mg for gastro-oesophageal reflux disease, assessed by endoscopy and symptoms.

    Science.gov (United States)

    Moraes-Filho, J P; Pedroso, M; Quigley, E M M

    2014-01-01

    Pantoprazole magnesium (pantoprazole-Mg) may display extended inhibition of the proton pump with the potential for improved clinical efficacy in gastro-oesophageal reflux disease (GERD). To compare the efficacy of pantoprazole-Mg and esomeprazole in GERD. Gastro-oesophageal reflux disease (Los Angeles grades A-D) patients were randomised to 4 weeks of treatment with pantoprazole-Mg (n = 290) or esomeprazole (n = 288), both 40 mg once daily, in this multicentre (14 Brazilian sites in 9 cities), double-blind study, with an additional 4 weeks' treatment in nonresponding patients. Severity of oesophagitis (at endoscopy) and GERD-related symptoms (ReQuest-GI) were assessed. The primary end point was the proportion of patients in complete remission (ReQuest-GI score <1.73 plus endoscopic healing) at week 4. Complete remission occurred in 61% of patients in each treatment group at 4 weeks (primary endpoint) and in 81% and 79% of patients in the pantoprazole-Mg and esomeprazole groups at 8 weeks, with no significant differences. Mucosal healing rates were high and not significantly different. At 8 weeks, symptom relief with pantoprazole-Mg was significantly greater than that with esomeprazole (91.6% vs. 86.0%, P = 0.0370) because of continued improvement in symptoms with pantoprazole-Mg from week 4 to week 8 (P = 0.0206). Pantoprazole-Mg 40 mg was at least as effective as esomeprazole 40 mg for complete remission and the mucosal healing rate was high. Symptom relief with pantoprazole-Mg continued to improve from 4 to 8 weeks and was greater than that with esomeprazole at week 8, suggesting an extended period of treatment effect (ClinicalTrials.gov identifier: NCT01132638). © 2013 John Wiley & Sons Ltd.

  6. Group Work

    Science.gov (United States)

    Wilson, Kristy J.; Brickman, Peggy; Brame, Cynthia J.

    2018-01-01

    Science, technology, engineering, and mathematics faculty are increasingly incorporating both formal and informal group work in their courses. Implementing group work can be improved by an understanding of the extensive body of educational research studies on this topic. This essay describes an online, evidence-based teaching guide published by…

  7. Reflection groups

    International Nuclear Information System (INIS)

    Eggermont, G.

    2006-01-01

    In 2005, PISA organised proactive meetings of reflection groups on involvement in decision making, expert culture and ethical aspects of radiation protection.All reflection group meetings address particular targeted audiences while the output publication in book form is put forward

  8. Perbandingan Gabapentin 600 mg dengan 1.200 mg per Oral Preoperatif terhadap Nilai Visual Analogue Scale dan Pengurangan Kebutuhan Petidin Pascaoperasi pada Modifikasi Mastektomi Radikal

    Directory of Open Access Journals (Sweden)

    Ardi Zulfariansyah

    2013-12-01

    Full Text Available Gabapentin is a GABA analog which has the effect of anti hyperalgesia, anti allodynia, and anti nociceptive. This research was conducted in order to assess the effect of 600mg and 1,200 mg gabapentin given preoperatively to assess visual analogue scale (VAS score and reduction of pethidine requirement. The study was done by conducting a double blind randomized controlled trial on 38 patients, aged 18–65 years, with ASA physical status I–II. Patients were divided into two groups: 600 mg gabapentin and 1,200 mg gabapentin group. The quality of pain was assessed using VAS score. The results were statistically analyzed using Mann-Whitney Test with 95% confidence interval and considered significant if p value <0.05. From the results, the VAS values obtained at rest and during mobilization were significantly different (p<0.05. The 1,200 mg gabapentin group received less additional pethidine (10.5% vs 15.8%, although no significant difference was shown (p=0.631. The conclusion of this study is that administration of 1,200 mg gabapentin per oral pre operatively is better when compared to 600 mg in reducing post operative visual analog scale score in modified radical mastectomy. However, it do not reduce the need for analgesic significantly.

  9. Effects of limestone, N, K and Mg fertilizers on Mg absorption by oats and barley

    Energy Technology Data Exchange (ETDEWEB)

    Alston, A M

    1966-01-01

    Oats grown in a pot experiment on two sandy loams were sampled at four stages of growth. Neither KCl nor MgSO/sub 4/. 7H/sub 2/O had any effect on yield but % Mg and total Mg uptake were consistently decreased by applying K and increased by applying Mg. Ca(NO/sub 3/)/sub 2/ increased % Mg more than did (NH/sub 4/)/sub 2/SO/sub 4/, but yield and total Mg uptake were higher where (NH/sub 4/)/sub 2/SO/sub 4/ was applied. The effects of fertilizers were similar on both soils. The effects of applying (NH/sub 4/)/sub 2/SO/sub 4/ and NaNO/sub 2/ to the soil on % Mg in barley were compared in a field experiment on an acid loam to which several rates of limestone had been applied. Treatments had no effect on the % Mg in grain or straw at maturity. At four earlier stages of growth (NH/sub 4/)/sub 2/SO)/sub 4/ increased % Mg in the plants more than did NaNO/sub 2/. Limestone slightly increased % Mg. Nitrification of NH/sub 4/ in the soil was rapid.

  10. Mg Incorporation Efficiency in Pulsed MOCVD of N-Polar GaN:Mg

    Science.gov (United States)

    Marini, Jonathan; Mahaboob, Isra; Hogan, Kasey; Novak, Steve; Bell, L. D.; Shahedipour-Sandvik, F.

    2017-10-01

    We report on the effect of growth polarity and pulsed or δ -doped growth mode on impurity incorporation in metalorganic chemical vapor deposition-grown GaN. In Ga-polar orientation, up to 12× enhancement in Mg concentration for given Mg flow rate is observed, resulting in enhanced p-type conductivity for these samples. In contrast, this enhancement effect is greatly diminished for N-polar samples, falling off with increasing Mg flow and showing maximum enhancement of 2.7× at 30 nmol/min Mg flow. At higher Mg flow rates, Mg incorporation at normal levels did not correspond to p-type conductivity, which may be due to Mg incorporation at nonacceptor sites. Concentrations of C, O, and Si were also investigated, revealing dependence on Mg flow in N-polar pulsed samples. Carbon incorporation was found to decrease with increasing Mg flow, and oxygen incorporation was found to remain high across varied Mg flow. These effects combine to result in N-polar samples that are not p-type when using the pulsed growth mode.

  11. Structural characteristics and corrosion behavior of biodegradable Mg-Zn, Mg-Zn-Gd alloys.

    Science.gov (United States)

    Kubásek, J; Vojtěch, D

    2013-07-01

    In this research, binary Mg-Zn (up to 3 wt% Zn) and ternary Mg-Zn-Gd (up to 3 wt% Gd, 3 wt% Zn) alloys were prepared by induction melting in an argon atmosphere. The structures of these alloys were characterized using light and scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction and X-ray fluorescence. In addition, Brinell hardness measurements were taken to supplement these studies. Corrosion behavior was evaluated by immersion tests and potentiodynamic measurements in a physiological solution (9 g/l NaCl). Depending on the composition, structures of the as-cast alloys contained α-Mg dendrites, MgZn, Mg5Gd and Mg3Gd2Zn3 phases. Compared to pure Mg, zinc improved the corrosion resistance of binary Mg-Zn. Gadolinium also improved the corrosion resistance in the case of Mg-1Zn-3Gd alloy. The highest corrosion rate was observed for Mg-3Zn-3Gd alloy. Our results improve the understanding of the relationships between the structure and corrosion behavior of our studied alloy systems.

  12. [Comparison of 1 mg/body and 3 mg/body of intravenous granisetron for the prevention of chemotherapy-induced nausea and vomiting and adverse events in hematological malignancy patients].

    Science.gov (United States)

    Motohashi, Shinya; Hori, Katsuhito; Ono, Takaaki; Ohnishi, Kazunori; Kawakami, Junichi

    2012-01-01

    Granisetron is a selective 5-hydroxy tryptamine3 receptor antagonist and widely used for chemotherapy-induced nausea and vomiting (CINV). Recommended dose of intravenous granisetron in the USA and Europe has been set at 0.01 mg/kg (1 mg/body) in the antiemetic treatment guidelines established by the American Society of Clinical Oncology and National Comprehension Cancer Network. In contrast, the approved dose in Japan is 0.04 mg/kg (3 mg/body). Randomized controlled trials (RCTs) which compared 1 mg/body with 3 mg/body of intravenous granisetron for CINV had been reported in Japan. In these RCTs, however, hematological malignancy patients were excluded. We performed observational retrospective study to compare 1 mg/body with 3 mg/body of intravenous granisetron for the prevention of CINV and adverse events in hematological malignancy patients. Number of the patients and chemotherapy courses were 15 and 30 in the 1 mg/body group, and 15 and 27 in the 3 mg/body group, respectively. No nausea rates in the 1 and 3 mg/body group were 83% and 89% of courses, respectively. No vomiting rates in the 1 and 3 mg/body group were 97% and 100% of courses, respectively. The incidences of constipation in the 1 and 3 mg/body group were 34% and 45% of courses, respectively. Anaphylaxis and headache did not occur in both groups. Our findings suggested that 1 mg/body of intravenous granisetron can prevent from CINV in hematological malignancy patients, as well as 3 mg/body.

  13. Formation of MgB2 at ambient temperature with an electrochemical process: a plausible mechanism

    International Nuclear Information System (INIS)

    Jadhav, A B; Subhedar, K M; Hyam, R S; Talaptra, A; Sen, Pintu; Bandyopadhyay, S K; Pawar, S H

    2005-01-01

    The binary intermetallic MgB 2 superconductor has been synthesized by many research groups. However, the mechanism of its formation is not clearly understood. In this communication, a comprehensive mechanism of the formation of MgB 2 from Le Chatelier's principle of equilibrium reaction has been explained both for solid-state reaction and electrodeposition methods. (rapid communication)

  14. Biological activity evaluation of magnesium fluoride coated Mg-Zn-Zr alloy in vivo.

    Science.gov (United States)

    Jiang, Hongfeng; Wang, Jingbo; Chen, Minfang; Liu, Debao

    2017-06-01

    To explore the biodegradable characteristics and biological properties, which could promote new bone formation, of MgF 2 coated magnesium alloy (Mg-3wt%Zn-0.5wt%Zr) in rabbits. Magnesium alloy with MgF 2 coating was made and the MgF 2 /Mg-Zn-Zr was implanted in the femoral condyle of rabbits. Twelve healthy adult Japanese white rabbits in weight of 2.8-3.2kg were averagely divided into A(Mg-Zn-Zr) group and B(MgF 2 /MgZn-Zr) group. Indexes such as microstructural evolution, SEM scan, X-ray, Micro-CT and mechanical properties were observed and detected at 1th day, 2th, 4th, 8th, 12th, 24th week after implantation. Low-density regions occurred around the cancellous bone, and the regions gradually expanded during the 12weeks after implantation. The implant was gradually absorbed from 12 to 24weeks. The density of surrounding cancellous bone increased compared with the 12th week data. The degradation rate of B group was lower than that of A group (Pmagnesium ions. The biological properties of the coating itself presented good biocompatibility and bioactivity. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Tachycardia in response to remote capsaicin injection as a model for nociception in the ball python (Python regius).

    Science.gov (United States)

    Williams, Catherine J A; James, Lauren E; Bertelsen, Mads F; Wang, Tobias

    2016-07-01

    To quantify the effect of subcutaneous (SC) capsaicin injection on heart rate (HR) in ball pythons (Python regius) and to assess the efficacy of two opioids (morphine and butorphanol) in modifying this response. Prospective, randomized, unmatched study. Eleven mixed-sex, captive-bred ball pythons. Snakes were randomly assigned to three groups (n = 6) by intramuscular premedication: 1) control: saline (0.9 mL); 2) morphine (10 mg kg(-1) ); and 3) butorphanol (10 mg kg(-1) ). Three snakes were tested twice and another two were tested three times in different treatments administered 1 month apart. Under isoflurane anaesthesia, snakes were instrumented with SC electrocardiogram (ECG) electrodes and an SC catheter for remote stimulus delivery. After recovery from anaesthesia, all snakes, in visual and audial isolation from the experimenter, received a sham stimulus of saline (0.4 mL) via the SC catheter. A nociceptive stimulus of SC capsaicin (3 mg in 0.2 mL saline with 7% Tween 80) was then applied by catheter at 7 hours after premedication. In a subset (n = 3), two sham injections (saline 0.2 mL) preceded the capsaicin treatment. HR was recorded via ECG, and changes in HR (ΔHR) from baseline were calculated for all stimulations. Capsaicin injection was associated with a significant increase in HR [peak ΔHR: saline group: 8.8 ± 7.1 beats minute(-1) ; capsaicin group: 21.1 ± 5.8 beats minute(-1) (p = 0.0055)] and integrated ΔHR as a function of time. The administration of morphine or butorphanol 7 hours prior to nociception failed to significantly reduce the peak and integrated ΔHR. Butorphanol caused marked, long-lasting sedation as assessed by muscle tone. The HR response to an SC capsaicin injection can serve as a nociceptive model in P. regius. Morphine and butorphanol administration did not reduce HR response to capsaicin stimulation but produced significantly different effects on pre-stimulation HR and sedation. © 2015 Association

  16. Thermoelectric power of PrMg3

    Science.gov (United States)

    Isikawa, Yosikazu; Somiya, Kazuya; Koyanagi, Huruto; Mizushima, Toshio; Kuwai, Tomohiko; Tayama, Takashi

    2010-01-01

    PrMg3 is supposed to be one of the strongly correlated electron systems originated from the hybridization between the Pr 4f and conduction electrons, because the gigantic electronic specific heat coefficient C/T was observed at low temperatures. However, a typical behaviour of - ln T dependence was not observed in the temperature dependence of the electrical resistivity. The thermoelectric power S is a powerful tool to investigate the density of states at the Fermi energy. We measured carefully the thermoelectric power of PrMg3 in the temperature range between 2 and 300 K. S is extremely small, ranged within ±1 μV/K over the whole temperature. The value of S/T at low temperature limit was also significantly smaller than expected from the specific heat results. We therefore conclude that the density of state at the Fermi level is not enhanced in PrMg3.

  17. Thermoelectric power of PrMg3

    International Nuclear Information System (INIS)

    Isikawa, Yosikazu; Somiya, Kazuya; Koyanagi, Huruto; Mizushima, Toshio; Kuwai, Tomohiko; Tayama, Takashi

    2010-01-01

    PrMg 3 is supposed to be one of the strongly correlated electron systems originated from the hybridization between the Pr 4f and conduction electrons, because the gigantic electronic specific heat coefficient C/T was observed at low temperatures. However, a typical behaviour of - ln T dependence was not observed in the temperature dependence of the electrical resistivity. The thermoelectric power S is a powerful tool to investigate the density of states at the Fermi energy. We measured carefully the thermoelectric power of PrMg 3 in the temperature range between 2 and 300 K. S is extremely small, ranged within ±1 μV/K over the whole temperature. The value of S/T at low temperature limit was also significantly smaller than expected from the specific heat results. We therefore conclude that the density of state at the Fermi level is not enhanced in PrMg 3 .

  18. Group theory

    CERN Document Server

    Scott, W R

    2010-01-01

    Here is a clear, well-organized coverage of the most standard theorems, including isomorphism theorems, transformations and subgroups, direct sums, abelian groups, and more. This undergraduate-level text features more than 500 exercises.

  19. Group Grammar

    Science.gov (United States)

    Adams, Karen

    2015-01-01

    In this article Karen Adams demonstrates how to incorporate group grammar techniques into a classroom activity. In the activity, students practice using the target grammar to do something they naturally enjoy: learning about each other.

  20. Computer group

    International Nuclear Information System (INIS)

    Bauer, H.; Black, I.; Heusler, A.; Hoeptner, G.; Krafft, F.; Lang, R.; Moellenkamp, R.; Mueller, W.; Mueller, W.F.; Schati, C.; Schmidt, A.; Schwind, D.; Weber, G.

    1983-01-01

    The computer groups has been reorganized to take charge for the general purpose computers DEC10 and VAX and the computer network (Dataswitch, DECnet, IBM - connections to GSI and IPP, preparation for Datex-P). (orig.)

  1. Group learning

    DEFF Research Database (Denmark)

    Pimentel, Ricardo; Noguira, Eloy Eros da Silva; Elkjær, Bente

    The article presents a study that aims at the apprehension of the group learning in a top management team composed by teachers in a Brazilian Waldorf school whose management is collective. After deciding to extend the school, they had problems recruiting teachers who were already trained based...... on the Steiner´s ideas, which created practical problems for conducting management activities. The research seeks to understand how that group of teachers collectively manage the school, facing the lack of resources, a significant heterogeneity in the relationships, and the conflicts and contradictions......, and they are interrelated to the group learning as the construction, maintenance and reconstruction of the intelligibility of practices. From this perspective, it can be said that learning is a practice and not an exceptional phenomenon. Building, maintaining and rebuilding the intelligibility is the group learning...

  2. Excited states in 22Mg via the 12C(12C,2n)22Mg reaction

    International Nuclear Information System (INIS)

    Jewett, Cybele; Baktash, Cyrus; Bardayan, Daniel W.; Blackmon, Jeff C.; Chipps, K.; Galindo-Uribarri, Alfredo; Greife, U.; Gross, Carl J.; Jones, K. L.; Liang, Junjien; Livesay, Jake; Kozub, R. L.; Nesaraja, Caroline D; Radford, David C.; Sarazin, F.; Smith, Michael Scott; Thomas, J. S.; Yu, Chang-Hong

    2007-01-01

    The 12C(12C, 2n)22Mg reaction was measured with the CLARION array and the RMS separator at the Holifield Facility of Oak Ridge National Laboratory. This experiment was performed to gather more information on the excited states in 22Mg, which might be of relevance to recent radioactive ion beam measurements of the astrophysically important 21Na(p,γ)22Mg reaction. The results are compared to direct measurements, transfer experiments and a competing experiment performed with Gammasphere

  3. Group technology

    International Nuclear Information System (INIS)

    Rome, C.P.

    1976-01-01

    Group Technology has been conceptually applied to the manufacture of batch-lots of 554 machined electromechanical parts which now require 79 different types of metal-removal tools. The products have been grouped into 7 distinct families which require from 8 to 22 machines in each machine-cell. Throughput time can be significantly reduced and savings can be realized from tooling, direct-labor, and indirect-labor costs

  4. Abelian groups

    CERN Document Server

    Fuchs, László

    2015-01-01

    Written by one of the subject’s foremost experts, this book focuses on the central developments and modern methods of the advanced theory of abelian groups, while remaining accessible, as an introduction and reference, to the non-specialist. It provides a coherent source for results scattered throughout the research literature with lots of new proofs. The presentation highlights major trends that have radically changed the modern character of the subject, in particular, the use of homological methods in the structure theory of various classes of abelian groups, and the use of advanced set-theoretical methods in the study of undecidability problems. The treatment of the latter trend includes Shelah’s seminal work on the undecidability in ZFC of Whitehead’s Problem; while the treatment of the former trend includes an extensive (but non-exhaustive) study of p-groups, torsion-free groups, mixed groups, and important classes of groups arising from ring theory. To prepare the reader to tackle these topics, th...

  5. Evaluation of 500- and 1,000-mg doses of ciprofloxacin for the treatment of chancroid.

    Science.gov (United States)

    Bodhidatta, L; Taylor, D N; Chitwarakorn, A; Kuvanont, K; Echeverria, P

    1988-01-01

    A randomized, double-blind study was performed comparing ciprofloxacin in a 500-mg single dose with 1,000 mg (500-mg doses given 12 h apart) for the treatment of chancroid in Thailand. Haemophilus ducreyi was isolated from 87 (48%) of 180 men with a clinical diagnosis of chancroid. For men with ulcers that were culture positive for H. ducreyi, rates of cure were 100% in the 500-mg group and 98% in the 1,000-mg group. For men with ulcers that were culture negative for H. ducreyi, rates of cure were 93% in the 500-mg group and 96% in the 1,000-mg group. The MIC of ciprofloxacin for 50% of isolates among 85 isolates of H. ducreyi was 0.007 micrograms/ml (range, 0.002 to 0.03 micrograms/ml). No significant adverse effects were detected in either group. These data indicate that both of these treatment regimens are equally effective therapies for chancroid in Thailand. PMID:3293526

  6. Superconducting properties of MgB2 particle impregnated with Mg-based alloys

    International Nuclear Information System (INIS)

    Shimizu, Yusuke; Matsuda, Kenji; Mizutani, Manabu; Nishimura, Katsuhiko; Kawabata, Tokimasa; Ikeno, Susumu; Hishinuma, Yoshimitsu; Aoyama, Shigeki

    2011-01-01

    The three-dimensional penetration method combined with semi-solid casting (SS-3DPC) was utilized to prepare magnesium diboride (MgB 2 ) powder composite materials with various host materials of Mg, Mg-3%Al, Mg-3%Al-1%Zn, Mg-9%Al, and Mg-9%Al-1%Zn. X-ray diffraction measurements indicated predominant peak patterns of MgB 2 and a host alloy, implying that the host material tightly bonded MgB 2 grains without melting the MgB 2 powder. This was confirmed by SEM images. Measured electrical resistivity and magnetization versus temperature showed clear signals of superconducting transition temperature of 27-38 K for all the samples cut out from the billets. Magnetic hysteresis loop observed at 5 K enabled us to estimate a critical current density (J c ) based on the extended Bean model. Additions of aluminum and zinc elements to magnesium host-matrix were found to enhance J c and increase residual resistivity (ρ 0 ) suggesting that aluminum and zinc have an effect on pinning magnetic flux flow for J c enhancement, and scattering conduction electrons for increase of ρ 0 . (author)

  7. Luna 24 ferrobasalt as a low-Mg primary melt

    International Nuclear Information System (INIS)

    Norman, M.; Ryder, G.

    1980-01-01

    Luna 24 very-low titanium (VLT) ferrobasalts, metabasalts, brown glasses and impact melts form a tight compositional cluster with no gradation to other groupings postulated for the Luna 24 core components. This suggests that the Luna 24 VLT ferrobasalt was extruded as a liquid of its own composition and was not derived by fractional crystallization from a more magnesian parent in a surface flow. Furthermore, the characteristics of the core lithologies are not easily visualized as components of such a differential flow, e.g. brown glasses. Gravitative settling models purporting to demonstrate the validity of the flow differentiation model are merely permissive. Subsurface fractionation requires that plagioclase, not olivine, be the liquidus phase. The high-Mg component in the Luna 24 core can be constrained, though not identified, chemically, and it has neither the major element, trace element, isotopic, nor mineralogical characteristics required of a possible parent to the Luna 24 VLT ferrobasalt. Thus models of fractionation lack a physical expression of the less differentiated compositions, contrary to the belief that the high-Mg component in the core is the parent material. The Luna 24 VLT ferrobasalt is probably a primary low-Mg melt from a plagioclase-bearing source region, and may have undergone little or no fractionation prior to eruption. Such a model is compatible with, and suggested by, chemical and experimental data. Caution against posulating that all Mg-poor melts are fractionated products, based on terrestrial models, is advised. The terrestrial oceanic situation of 'primary melts' with similar Mg/Fe is probably not valid for the Moon. (Auth.)

  8. Electronic structure of MgB2

    Indian Academy of Sciences (India)

    Abstract. Results of ab initio electronic structure calculations on the compound MgB2 using the. FPLAPW method employing GGA for the exchange-correlation energy are presented. Total energy minimization enables us to estimate the equilibrium volume, c/a ratio and the bulk modulus, all of which are in excellent ...

  9. Electronic structure of MgB 2

    Indian Academy of Sciences (India)

    Results of ab initio electronic structure calculations on the compound MgB2 using the FPLAPW method employing GGA for the exchange-correlation energy are presented. Total energy minimization enables us to estimate the equilibrium volume, / ratio and the bulk modulus, all of which are in excellent agreement with ...

  10. doped LiMgPO4 phosphor

    Indian Academy of Sciences (India)

    attention because of their remarkable luminescence proper- ties and .... Figure 1. (a) X-ray diffraction patterns of LiMgPO4:Tb3+ phosphor and (b) standard data. ICDD file. .... ground signal which affects the signal to noise ratio [17]. MDD was ...

  11. Group dynamics.

    Science.gov (United States)

    Scandiffio, A L

    1990-12-01

    Group dynamics play a significant role within any organization, culture, or unit. The important thing to remember with any of these structures is that they are made up of people--people with different ideas, motivations, background, and sometimes different agendas. Most groups, formal or informal, look for a leader in an effort to maintain cohesiveness of the unit. At times, that cultural bond must be developed; once developed, it must be nurtured. There are also times that one of the group no longer finds the culture comfortable and begins to act out behaviorally. It is these times that become trying for the leader as she or he attempts to remain objective when that which was once in the building phase of group cohesiveness starts to fall apart. At all times, the manager must continue to view the employee creating the disturbance as an integral part of the group. It is at this time that it is beneficial to perceive the employee exhibiting problem behaviors as a special employee, as one who needs the benefit of your experience and skills, as one who is still part of the group. It is also during this time that the manager should focus upon her or his own views in the area of power, communication, and the corporate culture of the unit that one has established before attempting to understand another's point of view. Once we understand our own motivation and accept ourselves, it is then that we may move on to offer assistance to another. Once we understand our insecurities recognizing staff dysfunction as a symptom of system dysfunction will not be so threatening to the concept of the manager that we perceive ourselves to be. It takes a secure person to admit that she or he favors staff before deciding to do something to change things. The important thing to know is that it can be done. The favored staff can find a new way of relating to others, the special employee can find new modes of behavior (and even find self-esteem in the process), the group can find new ways

  12. A Raman spectroscopic study of the structural aspects of K2MgCl4 and Cs2MgCl4 as solid single crystals and molten salts

    International Nuclear Information System (INIS)

    Brooker, M.H.

    1975-01-01

    Polarized Raman spectra have been obtained for oriented single crystals of K 2 MgCl 4 and Cs 2 MgCl 4 at 77 and 298 K. The data are in excellent agreement with factor group analyses based on the space groups I 4 /mmm (D 17 4 /subh/) and Pnma (D 16 2 /subh/) for the K 2 MgCl 4 and Cs 2 MgCl 4 crystals. In K 2 MgCl 4 the magnesium is surrounded by six chloride ions in a distorted octahedral arrangement with a network structure such that neighboring octahedra share corners. In Cs 2 MgCl 4 a discrete tetrahedral MgCl 4 2- species is present. The 35 Cl-- 37 Cl isotopic splitting of the symmetric stetching mode of the tetrahedral MgCl 4 2- species has been resolved at 77 K and is similar to that observed for CCl 4 . Raman spectra for the high temperature solids and molten salts suggest that the coordination number of magnesium changes from six in solid K 2 MgCl 4 to four in the melt, whereas Cs 2 MgCl 4 melts with retention of the MgCl 4 2- tetrahedral complex. Additional evidence is presented to support previous reports that the MgCl 4 2- tetrahedral species is the principal complex ion in the melts, although a fraction of the magnesium appears to be present in a polynuclear complex, perhaps Mg 2 Cl 6 2-

  13. Group representations

    CERN Document Server

    Karpilovsky, G

    1994-01-01

    This third volume can be roughly divided into two parts. The first part is devoted to the investigation of various properties of projective characters. Special attention is drawn to spin representations and their character tables and to various correspondences for projective characters. Among other topics, projective Schur index and projective representations of abelian groups are covered. The last topic is investigated by introducing a symplectic geometry on finite abelian groups. The second part is devoted to Clifford theory for graded algebras and its application to the corresponding theory

  14. Lego Group

    DEFF Research Database (Denmark)

    Møller Larsen, Marcus; Pedersen, Torben; Slepniov, Dmitrij

    2010-01-01

    The last years’ rather adventurous journey from 2004 to 2009 had taught the fifth-largest toy-maker in the world - the LEGO Group - the importance of managing the global supply chain effectively. In order to survive the largest internal financial crisis in its roughly 70 years of existence......, the management had, among many initiatives, decided to offshore and outsource a major chunk of its production to Flextronics. In this pursuit of rapid cost-cutting sourcing advantages, the LEGO Group planned to license out as much as 80 per cent of its production besides closing down major parts...

  15. Sexual asthenia: Tradamixina versus Tadalafil 5 mg daily

    Science.gov (United States)

    2012-01-01

    Background Reduced libido is widely considered the most prominent symptomatic reflection of low testosterone (T) levels in men. Testosterone deficiency (TD) afflicts approximately 30% of men aged 40-79 years. This study seeks to evaluate the effect of a new natural compound “tradamixina “in order to improve male sexual function in elderly men, particularly libido and possible erectile dysfunction, versus administration of tadalafil 5 mg daily. Methods Seventy patients (67.3± 3.7 years) with stable marital relations and affected by reduced libido, with or without erectile dysfunction were recruited. They were randomly separated in 2 groups A-B of 35. Group A was administered twice a day a new compound “Tradamixina” (150 mg of Alga Ecklonia Bicyclis, 396 mg of Tribulus Terrestris and 144 mg of D-Glucosamine and N-Acetyl-D-Glucosamine) for two months, while Group B was administered tadalafil 5 mg daily, for two months. At visit and after 60 days of treatment patients were evaluated by means of detailed medical and sexual history, clinical examination, laboratory investigations (Total and Free T), instrumental examination (NPTR- nocturnal penile tumescence and rigidity test- with Rigiscan). Patients completed a self-administered IIEF questionnaire (The international index of erectile function) and SQoLM questionnaire (Sexual quality of life Questionnarie-Male). The results pre and post treatment were compared by Student t test (p<0.005). Results After 2 months of treatment in group A serum TT levels (230±18 ng/dl vs 671±14 ng/dl ) and FT levels(56± 2.4 pg/ml vs 120± 3.9pg/ml) increased, while in group B serum TT levels (245±12 ng/dl vs 247±15 ng/dl ) and FT levels(53± 0.3 pg/ml vs 55± 0.5pg/ml) increased not statistically significant. The patient’s numbers with negative NPTR improved after treatment in group A and B (15 vs 18 and 13 vs 25 respectively). The IIEF total score in group A increased after treatment with tradamixina (15±1.5 vs 29.77±1

  16. Proteome of Salmonella enterica serotype Tyhimurium Grown in Low Mg2+/pH Medium

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Liang; Ansong, Charles; Smallwood, Heather S.; Rommereim, Leah M.; McDermott, Jason E.; Brewer, Heather M.; Norbeck, Angela D.; Taylor, Ronald C.; Gustin, Jean K.; Heffron, Fred; Smith, Richard D.; Adkins, Joshua N.

    2009-09-04

    To determine the impact of a low Mg2+/pH defined growth medium (MgM) on the proteome of Salmonella enterica serotype Typhimurium, we cultured S. Typhimurium cells in the medium under two different conditions termed MgM Shock and MgM Dilution and then comparatively analyzed the bacterial cells harvested from these conditions by a global proteomic approach. Proteomic results showed that MgM Shock and MgM Dilution differentially affected the S. Typhimurium proteome. MgM Shock induced a group of proteins whose induction usually occurred at low O2 level, while MgM Dilution induced those related to the type III secretion system (T3SS) of Salmonella Pathogenicity Island 2 (SPI2) and those involved in thiamine or biotin biosynthesis. The metabolic state of the S. Typhimurium cells grown under MgM Shock condition also differed significantly from that under MgM Dilution condition. Western blot analysis not only confirmed the proteomic results, but also showed that the abundances of SPI2-T3SS proteins SsaQ and SseE and biotin biosynthesis proteins BioB and BioD increased after S. Typhimurium infection of RAW 264.7 macrophages. Deletion of the gene encoding BioB reduced the bacterial ability to replicate inside the macrophages, suggesting a biotin-limited environment encountered by S. Typhimurium within RAW 264.7 macrophages.

  17. Perbandingan Pemberian Ondansetron 8 mg dengan Tramadol 1 mg/ kgBB Intravena untuk Mencegah Menggigil Pascaanestesi Umum pada Operasi Mastektomi Radikal atau Modifikasi

    Directory of Open Access Journals (Sweden)

    Mirza Oktavian

    2014-04-01

    Full Text Available ost anesthetic shivering is a common complication of general anesthesia and preventable with several types of drugs. The aim of this study was to compare the efficacy of intravenous 8mg ondansetron versus tramadol 1 mg/kgBW in preventing post anesthetic shivering after general anesthesia. The research is a prospective, randomized double-blind controlled study involving 38 female patients aged 30–65 years at Dr. Hasan Sadikin Hospital Bandung period March–April 2012, American Society of Anesthesiologist (ASA physical status I–II, who underwent radical or modified mastectomy. Subjects were randomly divided into two groups. One group was given ondansetron 8 mg and the other group was given tramadol 1 mg/kgBW before surgical wound closure. Research results showed that incidence of post anesthetic shivering was less on tramadol group (15.8% compared to ondansetron (52.6% group, which is statistically significant (p<0.05. In conclusion, administration of tramadol 1 mg/kgBW intravenously is more effective in preventing post anesthetic shivering in radical or modified mastectomy.

  18. Preliminary study of the characteristics of a high Mg containing Al-Mg-Si alloy

    International Nuclear Information System (INIS)

    Yan, F; McKay, B J; Fan, Z; Chen, M F

    2012-01-01

    An Al-20Mg-4Si high Mg containing alloy has been produced and its characteristics investigated. The as-cast alloy revealed primary Mg 2 Si particles evenly distributed throughout an α-Al matrix with a β-Al 3 Mg 2 fully divorced eutectic phase observed in interdendritic regions. The Mg 2 Si particles displayed octahedral, truncated octahedral, and hopper morphologies. Additions of Sb, Ti and Zr had a refining influence reducing the size of the Mg 2 Si from 52 ± 4 μm to 25 ± 0.1 μm, 35 ± 1 μm and 34 ± 1 μm respectively. HPDC tensile test samples could be produced with a 0.6 wt.% Mn addition which prevented die soldering. Solution heating for 1 hr was found to dissolve the majority of the Al 3 Mg 2 eutectic phase with no evidence of any effect on the primary Mg 2 Si. Preliminary results indicate that the heat treatment has a beneficial effect on the elongation and the UTS.

  19. Investigation of the 24Mg(d, p)25Mg reaction

    NARCIS (Netherlands)

    Meurders, F.; Korte, G. de

    1975-01-01

    Abstract Proton angular distributions from the 24Mg(d, p)25Mg reaction at Ed = 12.0 MeV have been measured with a split-pole magnetic spectrograph for Ex < 6 MeV at an average resolution (FWHM) of 7 keV. New ln values have been determined for three levels. A DWBA analysis yielded spectroscopic

  20. Respiratory outcomes following 100 mg/kg v. 200 mg/kg of poractant ...

    African Journals Online (AJOL)

    In keeping with current evidence, the initial dose of poractant alpha was increased from 100 mg/kg to 200 mg/kg. e outcomes of newborns requiring treatment with surfactant before and aer this change were reviewed. Methods. Electronic clinical records were reviewed of infants admitted to ACH who received surfactant ...

  1. Mg/Ca ratio in fertilization and agricultural soils, Mg percent of liming ...

    African Journals Online (AJOL)

    Strong increase of NPK (nitrogen, phosphorus and potassium) in mineral fertilization (fm) included relative delay in Mg supplementation and dilution in plant available silicon (Si) via recycled nutrients (rcl). (Silicon is not included in essential fertilizers in Finland.) Methods: We have assessed old data on Ca and Mg in ...

  2. Informal groups

    NARCIS (Netherlands)

    E. van den Berg; P. van Houwelingen; J. de Hart

    2011-01-01

    Original title: Informele groepen Going out running with a group of friends, rather than joining an official sports club. Individuals who decide to take action themselves rather than giving money to good causes. Maintaining contact with others not as a member of an association, but through an

  3. Decay of a Jπ=36+ Resonance in the 24Mg+24Mg Reaction

    International Nuclear Information System (INIS)

    Salsac, M.-D.; Haas, F.; Courtin, S.

    2005-01-01

    For the 24 Mg+ 24 Mg reaction, striking narrow and correlated resonance structures have been observed previously in the excitation functions of the elastic and low-lying channels. In our study we have decided to focus on the resonance at E C M =45.7 MeV, which is known to have J π =36 + . Despite the very high excitation energy(∼60 MeV) in the 48 Cr composite system, this resonance has a narrow total width of 170 keV. To determine precisely which states in the inelastic 24 Mg channels carry away the resonance flux, an experiment, on the 24 Mg + 24 Mg reaction at energies On and OFF resonance, has been performed at the Legnaro Tandem accelerator using the Prisma fragment spectrometer associated with the CLARA γ array

  4. Mg II Line Variation of 32 Cygni

    Directory of Open Access Journals (Sweden)

    Young Woon Kang

    1992-12-01

    Full Text Available The Mg II lines have been extracted from the IUE archival spectra of 32 Cygni to investigate the effect of the atmospheric eclipse. The UV light curve has been reduced from the continuum flux at the center wavelength of 2807.5 Å in the IUE spectra. The equivalent width of the Mg II k absoption line has been measured for each spectra. The results of the light variation and flux tracing of the absorption line at the vicinity of the primary eclipse confirmed the atmospheric eclipse. The atmospheric effect lasted until the phase 0.06 in the absorptin line tracing, while it lasted until the phase 0.02 in the UV light curve, respectively.

  5. COMMUNICATIONS GROUP

    CERN Multimedia

    L. Taylor

    2011-01-01

    The CMS Communications Group, established at the start of 2010, has been busy in all three areas of its responsibility: (1) Communications Infrastructure, (2) Information Systems, and (3) Outreach and Education. Communications Infrastructure There are now 55 CMS Centres worldwide that are well used by physicists working on remote CMS shifts, Computing operations, data quality monitoring, data analysis and outreach. The CMS Centre@CERN in Meyrin, is the centre of the CMS offline and computing operations, hosting dedicated analysis efforts such as during the CMS Heavy Ion lead-lead running. With a majority of CMS sub-detectors now operating in a “shifterless” mode, many monitoring operations are now routinely performed from there, rather than in the main Control Room at P5. The CMS Communications Group, CERN IT and the EVO team are providing excellent videoconferencing support for the rapidly-increasing number of CMS meetings. In parallel, CERN IT and ...

  6. Group therapy

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Full text: In his review 'Genesis of Unified Gauge Theories' at the symposium in Honour of Abdus Salam (June, page 23), Tom Kibble of Imperial College, London, looked back to the physics events around Salam from 1959-67. He described how, in the early 1960s, people were pushing to enlarge the symmetry of strong interactions beyond the SU(2) of isospin and incorporate the additional strangeness quantum number. Kibble wrote - 'Salam had students working on every conceivable symmetry group. One of these was Yuval Ne'eman, who had the good fortune and/or prescience to work on SU(3). From that work, and of course from the independent work of Murray Gell- Mann, stemmed the Eightfold Way, with its triumphant vindication in the discovery of the omega-minus in 1964.' Yuval Ne'eman writes - 'I was the Defence Attaché at the Israeli Embassy in London and was admitted by Salam as a part-time graduate student when I arrived in 1958. I started research after resigning from the Embassy in May 1960. Salam suggested a problem: provide vector mesons with mass - the problem which was eventually solved by Higgs, Guralnik, Kibble,.... (as described by Kibble in his article). I explained to Salam that I had become interested in symmetry. Nobody at Imperial College at the time, other than Salam himself, was doing anything in groups, and attention further afield was focused on the rotation - SO(N) - groups. Reacting to my own half-baked schemes, Salam told me to forget about the rotation groups he taught us, and study group theory in depth, directing me to Eugene Dynkin's classification of Lie subalgebras, about which he had heard from Morton Hamermesh. I found Dynkin incomprehensible without first learning about Lie algebras from Henri Cartan's thesis, which luckily had been reproduced by Dynkin in his 1946 thesis, using his diagram method. From a copy of a translation of Dynkin's thesis which I found in the British Museum Library, I

  7. High temperature mechanical forming of Mg alloys

    International Nuclear Information System (INIS)

    Mwembela, A.; McQueen, H.J.; Myshlyaev, M.

    2002-01-01

    Mg alloys are hot worked in the range 180-450 o C and 0.0-10 s -1 ; the present project data are compared with a wide selection of published results. The flow stresses and their dependence on temperature and strain rate are fairly similar to simple Al alloys: however, the hot ductility is much lower (≤3 in torsion). Twinning plays a significant role in Mg alloys almost independently of temperature; the twins initiate at low strains in grains poorly oriented for basal slip and in consequence become well disposed for such slip. As T rises, there is increasing formation of subgrains that spread toward the grain centers from grain and twin boundaries: this is indicative of stress concentrations inducing non-basal sup which helps provide the geometrically necessary dislocations. Above about 240 o C, dynamic (DRX) nucleates at grain and twin boundaries, preferentially at intersections; this again is evidence of non-basal slip that provides the highly misoriented cells. The boundaries in which further strain concentrates producing further DRX. The microstructure remains very heterogeneous compared to the uniform dynamically recovered substructure in Al alloys, thus giving rise to the reduced ductility. These results are employed to interpret the mechanical and microstructural behavior of Mg alloys in extrusion, rolling and forging. (author)

  8. Mg,Ca-ATPase activity under irradiation

    International Nuclear Information System (INIS)

    Ladutin, V.V.; Orlova, V.V.; Lob, P.A.; Gerasiminko, I.V.; Mack, E.I.

    2003-01-01

    Full text: The influence of different doses irradiation at the Mg,Ca-ATPase activity at the rat brain has been investigated. The analyses were made at the apparatus of LKB and Carl-Ceis-Jena firm with help of reagents of Sigma and Boehringer firm. Rats decapitated after 1, 3, 6, 24 and 48 h after action of irradiation. Dose 0.206 C/kg. Erythrocytes. 1 and 3h after irradiation influence- decrease of Mg,Ca-ATPase activity to 86-87% relatively control level, 24 and 48 h - increase of activity to the control level. Dose 0.312 C/kg. Large hemispheres. 1h - decrease of ATPase activity to 90% relatively control, 3h - increase to control level, 24h - fall to 86%, after 48h small increase to 93% relatively control. Dose 9.287 C/kg. Large hemispheres. 1h - sharp fall of Mg, Ca-ATPase activity to 67 % relatively control, increase of activity to 96% after 3h and sharp fall of activity to 64% 6h after action of irradiation. Dose 9.287 C/kg. Cerebellum. 1h - sharp decrease of ATPase activity to 80%. After 3h -sharp increase to 160% relatively control level and sharp fall of ATPase activity to 47% relatively control after 6h. The mechanism of radiation pathology of active ion transport has been discussed

  9. Interstitial Fe in MgO

    CERN Document Server

    Mølholt, T E; Gunnlaugsson, H P; Svane, A; Masenda, H; Naidoo, D; Bharuth-Ram, K; Fanciulli, M; Gislason, H P; Johnston, K; Langouche, G; Ólafsson, S; Sielemann, R; Weyer, G

    2014-01-01

    Isolated Fe-57 atoms were studied in MgO single-crystals by emission Mossbauer spectroscopy following implantation of Mn-57 decaying to Fe-57. Four Mossbauer spectral components were found corresponding to different Fe lattice positions and/or charge states. Two components represent Fe atoms substituting Mg as Fe2+ and Fe3+, respectively; a third component is due to Fe in a strongly implantation-induced disturbed region. The fourth component, which is the focus of this paper, can be assigned to Fe at an interstitial site. Comparison of its measured isomer shift with ab initio calculations suggests that the interstitial Fe is located on, or close to, the face of the rock-salt MgO structure. To harmonize such an assignment with the measured near-zero quadrupole interaction a local motion process (cage motion) of the Fe has to be stipulated. The relation of such a local motion as a starting point for long range diffusion is discussed.

  10. Electronic structure of ferromagnet-insulator interfaces: Fe/MgO and Co/MgO

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, M.

    2007-07-11

    In this thesis the electronic structure of Fe/MgO{sub x} and Co/MgO{sub x} ferromagnet-insulator interfaces, representing material systems which are widely used in magnetic tunnel junctions, is studied by means of spin- and angle-resolved photoemission spectroscopy. The photoemission studies focus particularly on the response of the ferromagnetic electronic system in contact with MgO of varying stoichiometries, as this reflects the mechanisms of metal-oxide bonding at real ferromagnet-insulator interfaces. The correlation between chemical bonding and electronic structure formation is analyzed by combining information from core- and valence-band photoemission spectroscopy. The spectral features are compared to band structure calculations, which are performed using the SPR-KKR method. The Fe/MgO and Co/MgO systems are prepared by molecular beam epitaxy under ultrahigh vacuum conditions on well-defined (4 x 6) GaAs(001) substrates. A structural analysis by means of low-energy electron diffraction (LEED) reveals their body-centered cubic crystalline structure, whereas the chemical characterization by Auger electron spectroscopy is used to quantify the chemical environment at the sample surfaces. The magnetic analysis, using the magneto-optical Kerr effect, reveals the uniaxial anisotropy of the ferromagnetic layers. A crucial parameter is given by the MgO degree of oxidation, which is addressed by means of core-level spectroscopy and quantified by suitable fitting procedures of the Mg 2p core level. The results of the photoemission experiments show, that the electronic structure of the Fe/MgO and Co/MgO ferromagnet/insulator interfaces and, consequently, the interfacial spin polarization are sensitively controlled by the interface chemistry. In particular, three distinct scenarios are identified: the nearly stoichiometric, the oxygen-deficient and the over-oxidized ferromagnet/MgO interface. Each case is defined by innate characteristics of the electronic structure at

  11. Efficacy and safety of terbinafine 500 mg once daily in patients with dermatophytosis

    Directory of Open Access Journals (Sweden)

    P Ravindra Babu

    2017-01-01

    Full Text Available Introduction: Dermatophytosis are the most common fungal infections globally. Terbinafine is considered to have good potency against dermatophytes, but resistance to terbinafine is on the rise. Objective: The objective of this study was to evaluate the efficacy and safety of terbinafine 500 mg given once daily in treatment of patients with superficial dermatophytosis. Materials and Methods: It was a retrospective questionnaire-based survey. Each doctor was given survey questionnaire booklet containing survey forms. Clinical response was graded according to the improvement in the affected lesion. Mycological cure was defined as negative microscopy under potassium hydroxide examination and a negative culture in Sabouraud's dextrose agar. Patients were divided into three groups depending on the duration of therapy, Group A – terbinafine 500 mg for 2 weeks, Group B – terbinafine 500 mg for 4 weeks, and Group C – terbinafine 500 mg for 6 weeks. Results: Total 50 doctors completed the survey involving 440 patients. In Group A, out of 194 patients, 87% (n = 169 patients showed very good response. In Group B, out of 211 patients, 92% (n = 194 of the patients showed very good response with >75% improvement in their lesion. In Group C, out of 35 patients, 80% (n = 30 patients showed very good response. Adverse drug reactions of mild to moderate intensity related to terbinafine were seen in 57 patients. Conclusion: Our survey indicates that terbinafine in a dose of 500 mg given once daily was efficacious and safe in the treatment of patients with dermatophytosis.

  12. Efficacy and Safety of Terbinafine 500 mg Once Daily in Patients with Dermatophytosis.

    Science.gov (United States)

    Babu, P Ravindra; Pravin, A J S; Deshmukh, Gaurav; Dhoot, Dhiraj; Samant, Aniket; Kotak, Bhavesh

    2017-01-01

    Dermatophytosis are the most common fungal infections globally. Terbinafine is considered to have good potency against dermatophytes, but resistance to terbinafine is on the rise. The objective of this study was to evaluate the efficacy and safety of terbinafine 500 mg given once daily in treatment of patients with superficial dermatophytosis. It was a retrospective questionnaire-based survey. Each doctor was given survey questionnaire booklet containing survey forms. Clinical response was graded according to the improvement in the affected lesion. Mycological cure was defined as negative microscopy under potassium hydroxide examination and a negative culture in Sabouraud's dextrose agar. Patients were divided into three groups depending on the duration of therapy, Group A - terbinafine 500 mg for 2 weeks, Group B - terbinafine 500 mg for 4 weeks, and Group C - terbinafine 500 mg for 6 weeks. Total 50 doctors completed the survey involving 440 patients. In Group A, out of 194 patients, 87% ( n = 169) patients showed very good response. In Group B, out of 211 patients, 92% ( n = 194) of the patients showed very good response with >75% improvement in their lesion. In Group C, out of 35 patients, 80% ( n = 30) patients showed very good response. Adverse drug reactions of mild to moderate intensity related to terbinafine were seen in 57 patients. Our survey indicates that terbinafine in a dose of 500 mg given once daily was efficacious and safe in the treatment of patients with dermatophytosis.

  13. Comparison of hydrogen storage properties of pure Mg and milled ...

    Indian Academy of Sciences (India)

    Administrator

    increase the hydriding and dehydriding rates, pure Mg was ground under hydrogen atmosphere (reactive .... Hydrogen storage properties of pure Mg and milled pure Mg. 833. Figure 3. ... elongated and flat shapes via collisions with the steel.

  14. Frovatriptan 2.5 mg plus dexketoprofen (25 mg or 37.5 mg) in menstrually related migraine. Subanalysis from a double-blind, randomized trial.

    Science.gov (United States)

    Allais, G; Bussone, G; Tullo, V; Cortelli, P; Valguarnera, F; Barbanti, P; Sette, G; D'Onofrio, F; Curone, M; Benedetto, C

    2015-01-01

    The purpose of this article is to investigate the efficacy and safety of frovatriptan plus dexketoprofen 25 or 37.5 mg (FroDex25 or FroDex37.5, respectively) compared to that of frovatriptan 2.5 mg (Frova) in menstrually related migraine (MRM). The aim of this article is to analyze a subgroup of 76 women who treated an MRM attack in this multicenter, randomized, double-blind, parallel-group study. The primary end-point was the proportion of patients who were pain free (PF) at two hours. Secondary end-points included pain-relief (PR) at two hours and 48 hours sustained pain free (SPF). PF rates at two hours were 29% under Frova, 48% under FroDex25 and 64% under FroDex37.5 (p dexketoprofen produced higher PF rates at two hours compared to Frova while maintaining efficacy at 48 hours. Tolerability profiles were comparable. © International Headache Society 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  15. COMMUNICATIONS GROUP

    CERN Multimedia

    L. Taylor

    2010-01-01

    The CMS Communications Group, established at the start of 2010, has been strengthening the activities in all three areas of its responsibility: (1) Communications Infrastructure, (2) Information Systems, and (3) Outreach and Education. Communications Infrastructure The Communications Group has invested a lot of effort to support the operations needs of CMS. Hence, the CMS Centres where physicists work on remote CMS shifts, Data Quality Monitoring, and Data Analysis are running very smoothly. There are now 55 CMS Centres worldwide, up from just 16 at the start of CMS data-taking. The latest to join are Imperial College London, the University of Iowa, and the Università di Napoli. The CMS Centre@CERN in Meyrin, which is now full repaired after the major flooding at the beginning of the year, has been at the centre of CMS offline and computing operations, most recently hosting a large fraction of the CMS Heavy Ion community during the lead-lead run. A number of sub-detector shifts can now take pla...

  16. Group play

    DEFF Research Database (Denmark)

    Tychsen, Anders; Hitchens, Michael; Brolund, Thea

    2008-01-01

    Role-playing games (RPGs) are a well-known game form, existing in a number of formats, including tabletop, live action, and various digital forms. Despite their popularity, empirical studies of these games are relatively rare. In particular there have been few examinations of the effects of the v......Role-playing games (RPGs) are a well-known game form, existing in a number of formats, including tabletop, live action, and various digital forms. Despite their popularity, empirical studies of these games are relatively rare. In particular there have been few examinations of the effects...... of the various formats used by RPGs on the gaming experience. This article presents the results of an empirical study, examining how multi-player tabletop RPGs are affected as they are ported to the digital medium. Issues examined include the use of disposition assessments to predict play experience, the effect...... of group dynamics, the influence of the fictional game characters and the comparative play experience between the two formats. The results indicate that group dynamics and the relationship between the players and their digital characters, are integral to the quality of the gaming experience in multiplayer...

  17. COMMUNICATIONS GROUP

    CERN Multimedia

    L. Taylor

    2011-01-01

    The CMS Communications Group has been busy in all three areas of its responsibility: (1) Communications Infrastructure, (2) Information Systems, and (3) Outreach and Education. Communications Infrastructure The 55 CMS Centres worldwide are well used by physicists working on remote CMS shifts, Computing operations, data quality monitoring, data analysis and outreach. The CMS Centre@CERN in Meyrin, is the centre of the CMS Offline and Computing operations, and a number of subdetector shifts can now take place there, rather than in the main Control Room at P5. A new CMS meeting room has been equipped for videoconferencing in building 42, next to building 40. Our building 28 meeting room and the facilities at P5 will be refurbished soon and plans are underway to steadily upgrade the ageing equipment in all 15 CMS meeting rooms at CERN. The CMS evaluation of the Vidyo tool indicates that it is not yet ready to be considered as a potential replacement for EVO. The Communications Group provides the CMS-TV (web) cha...

  18. Discharge behaviour of Mg-Al-Pb and Mg-Al-Pb-In alloys as anodes for Mg-air battery

    International Nuclear Information System (INIS)

    Wang, Naiguang; Wang, Richu; Peng, Chaoqun; Peng, Bing; Feng, Yan; Hu, Chengwang

    2014-01-01

    Highlights: • We investigate the effect of indium on the discharge behaviour of Mg-Al-Pb alloy. • We evaluate the performance of Mg-air batteries with Mg-Al-Pb and Mg-Al-Pb-In anodes. • We analyze the activation mechanism of Mg-Al-Pb-In alloy in the discharge process. - Abstract: The discharge behaviour of Mg-Al-Pb and Mg-Al-Pb-In alloys in 3.5 wt.% NaCl solution is investigated by electrochemical techniques, and compared with that of pure magnesium. The results show that Mg-Al-Pb-In alloy provides a more negative potential and exhibits a higher utilization efficiency in contrast with Mg-Al-Pb alloy and pure magnesium during the half-cell test at a large current density, and gives desirable discharge performance when used as anode for Mg- air battery. The peak power density of the Mg-air battery with Mg-Al-Pb-In anode is 94.5 mW cm −2 , which is comparable with those of Mg-H 2 O 2 semi-fuel batteries. Moreover, the activation mechanism of Mg-Al-Pb-In alloy during the discharge process is also analyzed

  19. Proton resonance elastic scattering of $^{30}$Mg for single particle structure of $^{31}$Mg

    CERN Multimedia

    The single particle structure of $^{31}$Mg, which is located in the so-called “island of inversion”, will be studied through measuring Isobaric Analog Resonances (IARs) of bound states of $^{31}$Mg. They are located in the high excitation energy of $^{31}$Al. We are going to determine the spectroscopic factors and angular momenta of the parent states by measuring the excitation function of the proton resonance elastic scattering around 0 degrees in the laboratory frame with around 3 MeV/nucleon $^{30}$Mg beam. The present study will reveal the shell evolution around $^{32}$Mg. In addition, the spectroscopic factor of the (7/2)$^{−}$ state which was not yet determined experimentally, may allow one to study the shape coexistence in this nucleus.

  20. Applications of thermodynamic calculations to Mg alloy design: Mg-Sn based alloy development

    International Nuclear Information System (INIS)

    Jung, In-Ho; Park, Woo-Jin; Ahn, Sang Ho; Kang, Dae Hoon; Kim, Nack J.

    2007-01-01

    Recently an Mg-Sn based alloy system has been investigated actively in order to develop new magnesium alloys which have a stable structure and good mechanical properties at high temperatures. Thermodynamic modeling of the Mg-Al-Mn-Sb-Si-Sn-Zn system was performed based on available thermodynamic, phase equilibria and phase diagram data. Using the optimized database, the phase relationships of the Mg-Sn-Al-Zn alloys with additions of Si and Sb were calculated and compared with their experimental microstructures. It is shown that the calculated results are in good agreement with experimental microstructures, which proves the applicability of thermodynamic calculations for new Mg alloy design. All calculations were performed using FactSage thermochemical software. (orig.)

  1. Clinical efficacy and safety of a new 1000-mg suspension versus twice-daily 500-mg tablets of MPFF in patients with symptomatic chronic venous disorders: a randomized controlled trial.

    Science.gov (United States)

    Carpentier, Patrick; van Bellen, Bonno; Karetova, Debora; Hanafiah, Harunarashid; Enriquez-Vega, Elizabeth; Kirienko, Alexander; Dzupina, Andrej; Sabovic, Miso; Reina Gutierrez, Lourdes; Subwongcharoen, Somboom; Tüzün, Hasan; Maggioli, Arnaud

    2017-10-01

    Chronic venous disorders (CVD) is estimated to affect 30% to 50% of women and 10% to 30% of men. The most widely prescribed treatment for CVD worldwide is micronized purified flavonoid fraction 500 mg (MPFF). The aim of this clinical trial was to develop a new once daily 1000-mg oral suspension of MPFF. In an international, randomized, double-blind, parallel-group study, symptomatic individuals classified CEAP C0s to C4s were randomized in either treatment arm and treated for 8 weeks. Lower limb symptoms (discomfort, pain and heaviness) were assessed using Visual Analog Scales (VAS), and quality of life (QoL) was measured with the CIVIQ-20 Questionnaire. A total of 1139 patients were included in the study. Both MPFF treatment regimens were well tolerated and associated with a significant reduction in lower limb symptoms. A non-inferiority of MPFF 1000-mg oral suspension once daily compared to MPFF 500-mg tablet twice daily (P1000 mg and -3.37 cm for MPFF 500 mg), leg pain (-3.27 cm for MPFF 1000 mg and -3.31 cm for MPFF 500 mg) and leg heaviness (-3.41 cm for MPFF 1000 mg and -3.46 cm for MPFF 500 mg). The patients' QoL was improved by about 20 points on the CIVIQ scale in both groups (19.33 points for MPFF 1000 mg and 20.28 points for MPFF 500 mg). MPFF 1000-mg oral suspension and MPFF 500-mg tablets treatments were associated with similar reductions in lower limb symptoms and QoL improvement. The new once daily MPFF1000-mg oral suspension has a similar safety profile to two tablets of MPFF 500 mg, with the advantage of one daily intake, potentially associated with improved patient adherence and easier CVD management.

  2. Green emission from ZnO–MgO nanocomposite due to Mg diffusion at the interface

    International Nuclear Information System (INIS)

    Sowri Babu, K.; Ramachandra Reddy, A.; Venugopal Reddy, K.

    2015-01-01

    The origin and electronic transitions responsible for green emission observed from ZnO–MgO nanocomposite are investigated. The photoluminescence (PL) spectrum of ZnO–MgO nanocomposite annealed at 600 °C showed only a sharp and intense UV emission peak centered at 396 nm. As the annealing temperature increased from 600 °C to 1000 °C, the green emission positioned at 503 nm is emerged and its intensity enhanced gradually and reached maximum value at 900 °C and then decreased at 1000 °C. It is observed that both UV and green emission intensities are enhanced with variation of atomic ratio (Zn/Mg=1.52, 0.50, 0.30, 0.21, 0.15). Our experiments confirmed that the enhancement of green emission intensity is due to the formation of oxygen vacancies (V o ) due to Mg doping at the interface of ZnO and MgO. This experimental observation is in good agreement with the recent theoretical predictions which states that Mg doping in ZnO lowers the formation energies of oxygen vacancies (V o ) and zinc interstitials (Zn i ) significantly. PL excitation and emission spectra analysis reveals that excited state for both UV and green emissions is same and lies 0.24 eV below the conduction band of ZnO. Hence, the green emission is attributed to the transition of an electron form the shallow donor (defect level of Zn i ) to the deep acceptor (defect level of V o ). - Highlights: • It is found that the UV emission intensity from ZnO–MgO nanocomposite enhanced with increase of Mg concentration. • The intensity of the green emission is enhanced gradually as the temperature increased from 600 °C to 900 °C and then decreased at 1000 °C. • The effect of Mg concentration, MgO, strain at the interface on green emission is investigated. • These experiments confirmed that green emission is due to the oxygen vacancies created in ZnO due to the Mg doping at the interface and it is in good agreement with the theoretical predictions. • The decrease of green emission intensity is

  3. Structural and physical properties of Mg3-xZnxSb2 (x=0-1.34)

    International Nuclear Information System (INIS)

    Ahmadpour, Faraz; Kolodiazhnyi, Taras; Mozharivskyj, Yurij

    2007-01-01

    The Mg 3-x Zn x Sb 2 phases with x=0-1.34 were prepared by direct reactions of the elements in tantalum tubes. According to the X-ray single crystal and powder diffraction, the Mg 3-x Zn x Sb 2 phases crystallize in the same P3-bar m1 space group as the parent Mg 3 Sb 2 phase. The Mg 3-x Zn x Sb 2 structure is different from the other substituted structures of Mg 3 Sb 2 , such as (Ca, Sr, Ba) Mg 2 Sb 2 or Mg 5.23 Sm 0.77 Sb 4 , in a way that in Mg 3-x Zn x Sb 2 the Mg atoms on the tetrahedral sites are replaced, while in the other structures Mg on the octahedral sites is replaced. Thermoelectric performance for the two members of the series, Mg 3 Sb 2 and Mg 2.36 Zn 0.64 Sb 2 , was evaluated from low to room temperatures through resistivity, Seebeck coefficient and thermal conductivity measurements. In contrast to Mg 3 Sb 2 which is a semiconductor, Mg 2.36 Zn 0.64 Sb 2 is metallic and exhibits an 18-times larger dimensionless figure-of-merit, ZT, at room temperature. However, thermoelectric performance of Mg 2.36 Zn 0.64 Sb 2 is still poor and it is mostly due to its large electrical resistivity. - Graphical abstract: The Mg atoms in Mg 3 Sb 2 were successfully substituted with Zn, with Zn going exclusively into the tetrahedral sites. Zn substitution increases the electrical conductivity in Mg 2.36 Zn 0.64 Sb 2 by closing the band gap. This change combined with a decrease in the thermal conductivity improves the ZT value

  4. Corrosion analysis of AlMg2 and AlMgSi using electrochemical method

    International Nuclear Information System (INIS)

    Dian A; Maman Kartaman; Rosika K; Yanlinastuti

    2014-01-01

    Corrosion test of cladding materials and structures of research reactor fuel, AlMgSi and AlMg2 have been performed in demineralized water of pH 2 and 6.7 using an electrochemical method. Corrosion phenomenon is affected by several factor such as composition and condition of solution. The purpose of this activity is to investigate the corrosion phenomena through the determination of the parameters of corrosion and polarization curve. The materials used are AlMg2 and AlMgSi alloy in circular dish shape with an area of 1 Cm"2. Preparation of the test sample is performed through several stages polishing, cleaning and drying procedures followed ASTM G3. The electrochemical method is done by measuring the open circuit potential (OCP), polarization resistance and potentiodynamic in demineralized water of pH 2 and pH 6.7 at temperature of 25°C. The results of the OCP is the corrosion potential (Ecorr) of AlMg2 and AlMgSi each of -906.1 mV and -619.8 mV at pH 2 and -868.6 and -756.7 mV at pH 6.7 mV. The results of measurements by polarization resistance technique showed that the corrosion rate of AlMg2 and AlMgSi in safe category (<2 mpy) at pH 6.7 and at pH 2 corrosion rate increased significantly, but still in the lightweight category (<20 mpy). Potentiodynamic curves showed that the passivation at pH 6.7 is very low while the passivation at pH 2 occurs within a relatively short range potential and followed events corroded. (author)

  5. Comparison of Efficiencies and Mechanisms of Catalytic Ozonation of Recalcitrant Petroleum Refinery Wastewater by Ce, Mg, and Ce-Mg Oxides Loaded Al2O3

    Directory of Open Access Journals (Sweden)

    Chunmao Chen

    2017-02-01

    Full Text Available The use of catalytic ozonation processes (COPs for the advanced treatment of recalcitrant petroleum refinery wastewater (RPRW is rapidly expanding. In this study, magnesium (Mg, cerium (Ce, and Mg-Ce oxide-loaded alumina (Al2O3 were developed as cost efficient catalysts for ozonation treatment of RPRW, having performance metrics that meet new discharge standards. Interactions between the metal oxides and the Al2O3 support influence the catalytic properties, as well as the efficiency and mechanism. Mg-Ce/Al2O3 (Mg-Ce/Al2O3-COP reduced the chemical oxygen demand by 4.7%, 4.1%, 6.0%, and 17.5% relative to Mg/Al2O3-COP, Ce/Al2O3-COP, Al2O3-COP, and single ozonation, respectively. The loaded composite metal oxides significantly increased the hydroxyl radical-mediated oxidation. Surface hydroxyl groups (–OHs are the dominant catalytic active sites on Al2O3. These active surface –OHs along with the deposited metal oxides (Mg2+ and/or Ce4+ increased the catalytic activity. The Mg-Ce/Al2O3 catalyst can be economically produced, has high efficiency, and is stable under acidic and alkaline conditions.

  6. A study on preparation and hydriding of β-Mg2Al3 and γ-Mg17Al12

    International Nuclear Information System (INIS)

    Hadi Suwarno

    2009-01-01

    The mechanism of the synthetic formation of β-Mg 2 Al 3 and γ-Mg 17 Al 12 has been studied. Mechanical alloying of Mg and Al powders with the atomic ratio of Mg:Al = 2:3 in toluene solution yields β-Mg 2 Al 3 compound after milling for 30 h. The γ-Mg 17 Al 12 can be formed by heating the β-Mg 2 Al 3 at 430°C under high vacuum. The measured hydrogen capacities of β-Mg 2 Al 3 and γ-Mg 17 Al 12 as hydride at 300°C are 3.2 and 4.9 wt%, respectively. Microstructure of the Mg-Al specimen shows that on hydriding at 300°C the polygonal shape of the γ-Mg 17 Al 12 changes into irregular shapes which are composed of γ-MgH 2 and Al. (author)

  7. Hydrogen absorption kinetics and structural properties of Mg85Ni10Ca5 and Mg90Ni10

    International Nuclear Information System (INIS)

    Aoki, Masakazu; Saito, Katsushi; Towata, Shin-ichi

    2005-01-01

    Mg 85 Ni 10 Ca 5 and Mg 90 Ni 10 were prepared by melting mixtures of the elements in mild steel crucibles and pouring them into copper molds. Hydrogen absorption kinetics and structural properties of the alloys were characterized by the volumetric method using a Sievert's apparatus, X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The crystallite size of Mg in Mg 85 Ni 10 Ca 5 , which is evaluated by XRD peak broadening, is about 50% smaller than that in Mg 90 Ni 10 . In addition, the nanometer-scale structure composed of Mg, Mg 2 Ni, Mg 2 Ca was observed in Mg 85 Ni 10 Ca 5 . Mg 85 Ni 10 Ca 5 shows better hydrogen absorption kinetics than Mg 90 Ni 10 in the temperature range of room temperature to 573 K. The better absorption kinetics of Mg 85 Ni 10 Ca 5 is mainly attributed to the nanometer-scale structure

  8. Efficacy and safety of tamsulosin hydrochloride 0.2 mg and combination of tamsulosin hydrochloride 0.2 mg plus solifenacin succinate 5 mg after transurethral resection of the prostate: a prospective, randomized controlled trial

    Science.gov (United States)

    Shin, Yu Seob; Zhang, Li Tao; You, Jae Hyung; Choi, In Sung; Zhao, Chen; Park, Jong Kwan

    2016-01-01

    Objective The objective of this study was to evaluate the safety and efficacy of tamsulosin hydrochloride 0.2 mg (TAM) and its combination with solifenacin succinate 5 mg (SOL) after transurethral resection of the prostate (TURP). Patients and methods The patients were randomized into three groups: TURP (group 1), TURP plus TAM (group 2), and TURP plus TAM + SOL (group 3). Patients in group 2 and group 3 received medication for 4 weeks. The primary efficacy end points were the mean change in total International Prostate Symptom Score (IPSS) and IPSS subscores. The secondary end points included quality-of-life score, Overactive Bladder Symptom Score, and short-form voiding and storage score of International Continence Society. Results In total, 37 men (31.8%) in group 1, 37 men (31.8%) in group 2, and 42 men (36.2%) in group 3 completed the study. In total IPSS, no significant improvement was seen from baseline to the end of treatment in groups 2 and 3 compared with group 1. However, in group 2, the decrement in the IPSS storage score was smaller than group 1 (P=0.02), and in group 3, the decrement in the IPSS voiding score was smaller than group 1 (P=0.05). In groups 2 and 3 compared with group 1, improvements in the quality of life score, total score of Overactive Bladder Symptom Score, and short-form voiding score and storage score of International Continence Society were not statistically significant. Conclusion Treatment with TAM and combination of TAM and SOL did not have significant additional benefits for lower urinary tract symptoms during the early recovery period after TURP. PMID:27698559

  9. Ropivacaine 7.5 mg/mL for Caesarean Section

    Directory of Open Access Journals (Sweden)

    N. K. Nguyen

    2010-01-01

    Full Text Available Background. Pain after Caesarean delivery is partly related to Pfannenstiel incision, which can be infiltrated with local anaesthetic solutions. Methods. A double- blind randomized control trial was designed to assess the analgesic efficacy of 7.5 mg/mL ropivacaine solution compared to control group, in two groups of one hundred and forty four parturients for each group, who underwent Caesarean section under spinal anaesthesia: group R (ropivacaine group and group C (control group. All parturients also received spinal sufentanil (2.5 g. Results. Ropivacaine infiltration in the Pfannenstiel incision for Caesarean delivery before wound closure leads to a reduction of 30% in the overall consumption of analgesics (348 550 mg for group R versus 504 426 mg for group C with <.05, especially opioids in the first 24 hours, but also significantly increases the time interval until the first request for an analgesic (4 h 20 min ± 2 h 26 for group R versus 2 h 42 ± 1 h 30 for group C. The P values for the two groups were: <.0001 for paracetamol, <.0001 for ketoprofen and P for nalbuphine which was the most significant. There is no significant difference in the threshold of VAS in the two series. Conclusion. This technique can contribute towards a programme of early rehabilitation in sectioned mothers, with earlier discharge from the post-labour suite.

  10. Reconstructive structural phase transitions in dense Mg

    International Nuclear Information System (INIS)

    Yao Yansun; Klug, Dennis D

    2012-01-01

    The question raised recently about whether the high-pressure phase transitions of Mg follow a hexagonal close-packed (hcp) → body centered cubic (bcc) or hcp → double hexagonal close-packed (dhcp) → bcc sequence at room temperature is examined by the use of first principles density functional methods. Enthalpy calculations show that the bcc structure replaces the hcp structure to become the most stable structure near 48 GPa, whereas the dhcp structure is never the most stable structure in the pressure range of interest. The characterized phase-transition mechanisms indicate that the hcp → dhcp transition is also associated with a higher enthalpy barrier. At room temperature, the structural sequence hcp → bcc is therefore more energetically favorable for Mg. The same conclusion is also reached from the simulations of the phase transitions using metadynamics methods. At room temperature, the metadynamics simulations predict the onset of a hcp → bcc transition at 40 GPa and the transition becomes more prominent upon further compression. At high temperatures, the metadynamics simulations reveal a structural fluctuation among the hcp, dhcp, and bcc structures at 15 GPa. With increasing pressure, the structural evolution at high temperatures becomes more unambiguous and eventually settles to a bcc structure once sufficient pressure is applied. (paper)

  11. COMMUNICATIONS GROUP

    CERN Multimedia

    L. Taylor

    2010-01-01

    The recently established CMS Communications Group, led by Lucas Taylor, has been busy in all three of its main are areas of responsibility: Communications Infrastructure, Information Systems, and Outreach and Education Communications Infrastructure The damage caused by the flooding of the CMS Centre@CERN on 21st December has been completely repaired and all systems are back in operation. Major repairs were made to the roofs, ceilings and one third of the floor had to be completely replaced. Throughout these works, the CMS Centre was kept operating and even hosted a major press event for first 7 TeV collisions, as described below. Incremental work behind the scenes is steadily improving the quality of the CMS communications infrastructure, particularly Webcasting, video conferencing, and meeting rooms at CERN. CERN/IT is also deploying a pilot service of a new videoconference tool called Vidyo, to assess whether it might provide an enhanced service at a lower cost, compared to the EVO tool currently in w...

  12. COMMUNICATIONS GROUP

    CERN Multimedia

    L. Taylor

    2011-01-01

    Communications Infrastructure The 55 CMS Centres worldwide are well used by physicists working on remote CMS shifts, Computing operations, data quality monitoring, data analysis and outreach. The CMS Centre@CERN in Meyrin is particularly busy at the moment, hosting about 50 physicists taking part in the heavy-ion data-taking and analysis. Three new CMS meeting room will be equipped for videoconferencing in early 2012: 40/5B-08, 42/R-031, and 28/S-029. The CMS-TV service showing LHC Page 1, CMS Page 1, etc. (http://cmsdoc.cern.ch/cmscc/projector/index.jsp) is now also available for mobile devices: http://cern.ch/mcmstv. Figure 12: Screenshots of CMS-TV for mobile devices Information Systems CMS has a new web site: (http://cern.ch/cms) using a modern web Content Management System to ensure content and links are managed and updated easily and coherently. It covers all CMS sub-projects and groups, replacing the iCMS internal pages. It also incorporates the existing CMS public web site (http:/...

  13. COMMUNICATIONS GROUP

    CERN Multimedia

    L. Taylor

    2012-01-01

      Outreach and Education We are fortunate that our research has captured the public imagination, even though this inevitably puts us under the global media spotlight, as we saw with the Higgs seminar at CERN in December, which had 110,000 distinct webcast viewers. The media interest was huge with 71 media organisations registering to come to CERN to cover the Higgs seminar, which was followed by a press briefing with the DG and Spokespersons. This event resulted in about 2,000 generally positive stories in the global media. For this seminar, the CMS Communications Group prepared up-to-date news and public material, including links to the CMS results, animations and event displays [http://cern.ch/go/Ch8thttp://cern.ch/go/Ch8t]. There were 44,000 page-views on the CMS public website, with the Higgs news article being by far the most popular item. CMS event displays from iSpy are fast becoming the iconic media images, featuring on numerous major news outlets (BBC, CNN, MSN...) as well as in the sci...

  14. Phase formation in Mg-Sn-Si and Mg-Sn-Si-Ca alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kozlov, A.; Groebner, J. [Institute of Metallurgy, Clausthal University of Technology, Robert-Koch-Str. 42, D-38678 Clausthal-Zellerfeld (Germany); Schmid-Fetzer, R., E-mail: schmid-fetzer@tu-clausthal.de [Institute of Metallurgy, Clausthal University of Technology, Robert-Koch-Str. 42, D-38678 Clausthal-Zellerfeld (Germany)

    2011-02-17

    Research highlights: > The solidification paths of ternary and quaternary alloys are analyzed in detail, using the tool of thermodynamic calculations. > The precipitation sequence of phases and their amounts compare well with the microstructure of alloys. > The most efficient comparison to the experimental thermal analysis data is done by calculation of the enthalpy variation with temperature. > The viability of a procedure for the selection of multicomponent key samples is demonstrated for the development of the Mg-Ca-Si-Sn phase diagram. - Abstract: Experimental work is done and combined with the Calphad method to generate a consistent thermodynamic description of the Mg-Ca-Si-Sn quaternary system, validated for Mg-rich alloys. The viability of a procedure for the selection of multicomponent key samples is demonstrated for this multicomponent system. Dedicated thermal analysis with DTA/DSC on sealed samples is performed and the microstructure of slowly solidified alloys is analyzed using SEM/EDX. The thermodynamic description and phase diagram of the ternary Mg-Si-Sn system, developed in detail also in this work, deviates significantly from a previous literature proposal. The phase formation in ternary and quaternary alloys is analyzed using the tool of thermodynamic equilibrium and Scheil calculations for the solidification paths and compared with present experimental data. The significant ternary/quaternary solid solubilities of pertinent intermetallic phases are quantitatively introduced in the quaternary Mg-Ca-Si-Sn phase diagram and validated by experimental data.

  15. [Experimental research in vitro of TK/GCV system for osteosarcoma MG-63 cell damage].

    Science.gov (United States)

    Zhang, Hua-Dong; Lu, Zhi; Feng, Yi; Liu, Xiao-Li; Hou, Hui-Ming

    2014-03-01

    To study the killing effects of the liposome-mediated thymidine kinase (TK)/ganciclovir (GCV) system on MG-63 osteosarcoma (OS) cells and its bystander effects. Liposome-mediated TK gene transfected into MG-63 OS cells, the efficiency of transfection was analyzed by flow cytometry and observed under inverted fluorescence microscope. Non-transfected osteosarcoma MG-63 cells were divided into three groups,in the experimental group 1 transfected TK/GCV cells cultured in solutiona liquid mixture by supernatant by 1/10,1/7,1/5,1/2 ratio to original broth; in the experimental group 2 transfected cells cultured in solutiona liquid mixture of supernatant filtered through 0.22 microm filter by 1/10,1/7, 1/5, 1/2 ratio to original broth, in control group the transfection cells cultured in original culture solution. Cell growth inhibition rate and osteosarcoma cell sensitivity to TK/GCV system were measured by MTT assay in each group. The TK gene was transfected into MG-63 OS cells successfully by liposome-mediated, flow cytometry instrument detection TK gene transfection cell transfection efficiency can reach 75.5%. Six days later the MTT assay showed that in the experimental group 1 inhibition rate of all concentration ratio of the mixed culture fluid were statistically significant as compared with the control group (P culture medium was not statistically significant as compared with the control group (P > 0.05). TK gene transfected MG-63 cells increased with the the GCV concentration,the cell apoptosis rate increased. The experiment demonstrated that the MG-63 OS cells are sensitive to the liposome-mediated TK/GCV system and bystander effects are significant.

  16. Live microbial cells adsorb Mg2+ more effectively than lifeless organic matter

    Science.gov (United States)

    Qiu, Xuan; Yao, Yanchen; Wang, Hongmei; Duan, Yong

    2018-03-01

    The Mg2+ content is essential in determining different Mg-CaCO3 minerals. It has been demonstrated that both microbes and the organic matter secreted by microbes are capable of allocating Mg2+ and Ca2+ during the formation of Mg-CaCO3, yet detailed scenarios remain unclear. To investigate the mechanism that microbes and microbial organic matter potentially use to mediate the allocation of Mg2+ and Ca2+ in inoculating systems, microbial mats and four marine bacterial strains ( Synechococcus elongatus, Staphylococcus sp., Bacillus sp., and Desulfovibrio vulgaris) were incubated in artificial seawater media with Mg/Ca ratios ranging from 0.5 to 10.0. At the end of the incubation, the morphology of the microbial mats and the elements adsorbed on them were analyzed using scanning electronic microscopy (SEM) and energy diffraction spectra (EDS), respectively. The content of Mg2+ and Ca2+ adsorbed by the extracellular polysaccharide substances (EPS) and cells of the bacterial strains were analyzed with atomic adsorption spectroscopy (AAS). The functional groups on the surface of the cells and EPS of S. elongatus were estimated using automatic potentiometric titration combined with a chemical equilibrium model. The results show that live microbial mats generally adsorb larger amounts of Mg2+ than Ca2+, while this rarely is the case for autoclaved microbial mats. A similar phenomenon was also observed for the bacterial strains. The living cells adsorb more Mg2+ than Ca2+, yet a reversed trend was observed for EPS. The functional group analysis indicates that the cell surface of S. elongatus contains more basic functional groups (87.24%), while the EPS has more acidic and neutral functional groups (83.08%). These features may be responsible for the different adsorption behavior of Mg2+ and Ca2+ by microbial cells and EPS. Our work confirms the differential Mg2+ and Ca2+ mediation by microbial cells and EPS, which may provide insight into the processes that microbes use to

  17. Half-life determination for 27Mg

    Science.gov (United States)

    Zahn, G. S.; Genezini, F. A.

    2015-07-01

    In this work, the half-life of the short-lived magnesium radionuclide 27Mg was measured by following the activity of samples after they were irradiated in the IEA-R1 reactor. An exponential decay function was then fitted to the results using the counts from a 60Co source as livetime chronometer; the individual half-life values obtained for each irradiation were compiled using both the usual unweighted and σ-2-weighted averages, as well as the robust averages obtained using the Normalized Residuals and the Rajeval techniques. The final halflive values obtained aren't compatible with the ENSDF compilation values, but have a similar uncertainty; analysis of the experimental literature values, all from the 50’s-60’s, show that further measurements should be undertaken in order to achieve a more robust consensus value for this half-life.

  18. Experimental lifetimes for Mg-like chlorine

    International Nuclear Information System (INIS)

    Engstroem, L.; Bengtsson, P.; Jupen, C.; Livingston, A.E.; Martinson, I.

    1995-01-01

    The results of beam-foil measurements of lifetimes for low-lying singlet levels in Mg-like chlorine, Cl VI, are presented. The decay curves were analyzed by means of the arbitrarily normalized decay curve method, combined with the recently developed CANYL code, which facilitates studies of decay chains. Cascade corrected data are presented for the levels 3s3p 1 P, 3p 2 1 S, 3p 2 1 D, and 3s3d 1 D, whereas less rigorous lifetime values, based on curve fits, were obtained for the 3p3d 1 D, 3p3d 1 F, and 3s4f 1 F levels. The data are in excellent agreement with recent theoretical values, and previous discrepancies between experiment and theory for short-lived states have been removed

  19. MgO by injection CVD

    International Nuclear Information System (INIS)

    Abrutis, A.; Kubilius, V.; Teiserkis, A.; Bigelyte, V.; Vengalis, B.; Jukna, A.; Butkute, R.

    1997-01-01

    Epitaxial YBa 2 Cu 3 O 7 layers with 45 in-plane orientation have been grown by injection CVD on MgO substrates polished off-axis to within 1.4-1.9 of the [100] direction. This new single-source CVD process is based on computer-controlled injection of precise microdoses of a metal-organic precursor solution into a CVD reactor. A wide range of solution compositions was tested to investigate compositional effects on phase purity, surface morphology, texturing and superconducting properties of the prepared films. The highest quality films with pure 45 texture had a smooth surface, zero resistance T c (R=0) of 88-89 K, and critical current density J c (77 K) above 10 6 A/cm 2 . (orig.) and critical current density J c (77 K) above 10 6 A/cm 2 . (orig.)

  20. The three shapes of 32Mg

    International Nuclear Information System (INIS)

    Poves, A.; Nowacki, F.; Caurier, E.

    2014-01-01

    The N=20 and N=28 'islands of inversion' are described by large scale shell model calculations which mix configurations with different Nℎω or equivalently with different number of particles promoted from the sd-shell to the p f-shell. We pay particular attention to the properties of the states at fix Nℎω which turn out to be the real protagonists of the physics at N=20. In particular we study the appearance of spherical, deformed and superdeformed structures in 32 Mg at fixed 0p-0h, 2p-2h and 4p-4h configurations. Finally we show that the islands of deformation at N=20 and N=28 merge in a single one for Magnesium isotopes. (authors)

  1. Mg amorphous alloys for biodegradable implants

    International Nuclear Information System (INIS)

    Danez, G.P.; Koga, G.Y.; Tonucci, S.; Bolfarini, C.; Kiminami, C.S.; Botta Filho, W.J.

    2010-01-01

    The use of implants made from amorphous alloys magnesium-based with additions of zinc and calcium are promising. Properties such as biocompatibility, low density, high mechanical strength, low modulus (as compared to alloys such as stainless steel and titanium), corrosion resistance and wear resistance make it attractive for use in implants. Moreover, the by-products of corrosion and wear are not toxic and may contribute to fixation. Aiming to understand the tendency of this amorphous ternary (Mg-Zn-Ca) and expand the information about this system, this work involved the use of the topological criterion of instability (λ) and the criterion of electronegativity (Δe) to the choice of compositions. The alloys were processed into wedge-shaped and analyzed structurally and in X-ray diffraction and scanning electron microscopy. (author)

  2. Single dose (400 mg) versus 7 day (200 mg) daily dose itraconazole in the treatment of tinea versicolor: a randomized clinical trial.

    Science.gov (United States)

    Wahab, M A; Ali, M E; Rahman, M H; Chowdhury, S A; Monamie, N S; Sultana, N; Khondoker, L

    2010-01-01

    Tinea (pityriasis) versicolor is a superficial fungal infection and one of the most commonly found pigmentary disorders of skin caused by the yeast Malassezia. Multiple topical as well as systemic therapies are available for treatment. Systemic therapies are used for extensive disease, frequent relapse or where topical agents have failed. The aim that translates the rationale of the study was to compare the efficacy, safety, tolerability and cost effectiveness of single dose 400mg versus 7 day 200 mg daily dose of itraconazole in the treatment of tinea versicolor. A clinical study was done to compare the efficacy of single dose (400 mg) of itraconazole and 7 day 200 mg daily dose of itraconazole in the treatment of extensive tinea versicolor. Total 60 patients (aged 18-50 years) were selected for the study during the period of June 2007 to May 2008 in the department of Dermatology of three different hospitals in Bangladesh. Cases having with extensive involvement, diagnosed clinically and confirmed by wood's lamp and KOH microscopy were taken. Patients were randomly allocated into equal groups. Group A was given single dose 400 mg itraconazole and Group B was given 7 day 200 mg daily itraconazole. Fifty three (88%) male and 7(12%) female were included in the study. The mean age of group A was 32.37+/-9 years and in group B 33.23+/-8 years. The mean duration of the disease in group A was 2.63+/-2 months and 2.76+/-2 months in group B. In group A clinical responders was found cure 22(73.33%) and improvement 5(16.33%) and in group B it was found cure 24(79.99%) and improvement 4(13.33%). The measure at the End point (EP1) equals to 90% response and in-group B it was found cure 24 (79.99%) and improvement 4(13.33%). (Here the End point EP2) equals to 93.33%. The EP clinical analysis however shows 91.66% response. Both single dose and 7 day daily dose of itraconazole can be effective in the treatment of tinea versicolor with extensive involvement but single dose appears

  3. Estabilidad de tabletas de Rifampicina 300 mg

    Directory of Open Access Journals (Sweden)

    Lisette Martínez Miranda

    2001-04-01

    Full Text Available Se realizó el estudio de estabilidad de las tabletas de rifampicina 300 mg. Se utilizó para la cuantificación del principio activo un método analítico desarrollado y validado por cromatografía líquida de alta resolución en fase reversa y detección ultravioleta. El estudio de estabilidad de las tabletas se efectuó mediante los métodos de vida útil y acelerado en condiciones isotérmicas; no se obtuvo una variación notable de la concentración en el tiempo de estudio y se demostró así la estabilidad química y térmica del principio activo, por lo que se proponen 2 años como fecha de vencimiento. La humedad relativa de 75, 84 y 92 % tuvo influencia en la estabilidad de la formulación en el período analizado.The stability study of rifampicin 300 mg was conducted. An analytical method developed and validated by high pressure liquid chromatography in reverse phase and ultraviolet detection was used for the quantification of the actives principle. The stability study of the tablets was conducted by the method of useful life and the accelerated method under isothermic conditions. There was no significant variation of the concentration during the time of study and, thus, the chemical and thermal stability of the active principle was proved. A period of 2 years was proposed as expiration date. A relative humidity of 75, 84 and 92% influenced on the stability of the formulation in the analyzed period.

  4. A better cure rate with 800 mg than with 400 mg clarithromycin regimens in one-week triple therapy for Helicobacter pylori infection in cigarette-smoking peptic ulcer patients.

    Science.gov (United States)

    Ishioka, Hidehiko; Mizuno, Motowo; Take, Susumu; Ishiki, Kuniharu; Nagahara, Yasuhiro; Yoshida, Tomowo; Okada, Hiroyuki; Yokota, Kenji; Oguma, Keiji

    2007-01-01

    In Helicobacter pylori eradication therapy, using a proton pump inhibitor plus amoxicillin and clarithromycin (PPI/AC regimen), the impact of the clarithromycin dose and smoking on efficacy is conflicting. Here, we compared the efficacy of 400 and 800 mg of clarithromycin in the regimen in relation to smoking in patients with peptic ulcer disease. We studied 601 H. pylori-positive patients with peptic ulcer disease who had received amoxicillin 750 mg and clarithromycin 200 or 400 mg together with lansoprazole 30 mg b.i.d. 305 patients were treated with a regimen containing 400 mg of clarithromycin (C400 group), and 296 patients with a regimen containing 800 mg (C800 group). Overall cure rates between the two groups were not significantly different, but the cure rate in the C800 group was significantly better than that in the C400 group among patients infected with clarithromycin-sensitive strains (p = 0.03). This difference could be attributed to differences among smokers versus non-smokers: the cure rate among smokers in the C800 group (91.0%) was better than that in the C400 group (80.0%, p = 0.003). 800 mg of clarithromycin is recommended in the PPI/AC regimen for patients who smoke and are infected with clarithromycin-sensitive H. pylori. 2007 S. Karger AG, Basel

  5. Hydriding and dehydriding rates of Mg, Mg-10TaF5, and Mg-10NbF5 prepared via reactive mechanical grinding

    Science.gov (United States)

    Song, Myoung Youp; Kwak, Young Jun; Lee, Seong Ho; Park, Hye Ryoung

    2015-01-01

    In this work, TaF5 and NbF5 were chosen as additives to enhance the hydriding and dehydriding rates of Mg. Mg, Mg-10TaF5, and Mg-10NbF5 samples were prepared by reactive mechanical grinding. The hydriding and dehydriding properties of the samples were then examined. Mg-10TaF5 had the largest amount of hydrogen absorbed for 30 min and the highest initial dehydriding rate after incubation period, followed in order by Mg-10NbF5, and Mg. At 593 K under 12 bar H2 at the first cycle, Mg-10TaF5 absorbed 3.63 wt% H for 5 min and 4.53 wt% H for 30 min. At 593 K under 1.0 bar H2 at the first cycle, Mg-10TaF5 desorbed 0 wt% H for 2.5 min, 0.59 wt% H for 5 min, 3.42 wt% H for 30 min, and 4.24 wt% H for 60 min. The reactive mechanical grinding of Mg with TaF5 or NbF5 is believed to have facilitated the nucleation and to have decreased the diffusion distances of hydrogen atoms. These two effects are believed to have increased the hydriding and dehydriding rates of Mg. The MgF2 and Ta2H formed in Mg-10TaF5, and the MgF2, NbH2, and NbF3 formed in Mg-10NbF5 are considered to have enhanced both of these effects.

  6. Mechanochemical Synthesis of Nanostructured MgXNi1-XO Compound by Mg-NiO Mixture

    Directory of Open Access Journals (Sweden)

    Nader Setoudeh

    2017-06-01

    Full Text Available Synthesis of magnesium nickel oxide phase such as MgxNi1-xO solid solutions has been studied in this research article using mechnochmical reaction between magnesium and nickel oxide. Mixtures of magnesium powder and nickel oxide (Mg+NiO with stoichiometric compositions were milled for different times in a planetary ball mill. Reduction reaction of nickel oxide by magnesium via a mechanically induced self-sustaining reaction (MSR was confirmed in the XRD measurements of the as-milled samples. Formation of nanostructured magnesium nickel oxide phases (such as Mg0.4Ni0.6O or MgNiO2 was observed after isothermal heating of the 30 minutes milled samples at 1000°C where nickel phase seems to disappear in XRD patterns. The traces of phases such as Mg0.4Ni0.6O or MgNiO2 were also observed in the as-milled mixtures. Therefore, the XRD results of the as-milled samples suggested that the formation of magnesium nickel oxide phases could be possible even after prolonged milling. The XRD and SEM results of both as-milled and isothermally heated samples indicated that the crystallite size and particle size of the final products reached to nanoscale after milling. Morphological and compositional evolution of the samples after heat treatment was monitored through SEM imaging and elemental analyses. The results confirmed that the composition of final product is close to Mg0.4Ni0.6O compound.

  7. Mg2+ in the major groove modulates B-DNA structure and dynamics.

    Directory of Open Access Journals (Sweden)

    Marc Guéroult

    Full Text Available This study investigates the effect of Mg(2+ bound to the DNA major groove on DNA structure and dynamics. The analysis of a comprehensive dataset of B-DNA crystallographic structures shows that divalent cations are preferentially located in the DNA major groove where they interact with successive bases of (A/GpG and the phosphate group of 5'-CpA or TpG. Based on this knowledge, molecular dynamics simulations were carried out on a DNA oligomer without or with Mg(2+ close to an ApG step. These simulations showed that the hydrated Mg(2+ forms a stable intra-strand cross-link between the two purines in solution. ApG generates an electrostatic potential in the major groove that is particularly attractive for cations; its intrinsic conformation is well-adapted to the formation of water-mediated hydrogen bonds with Mg(2+. The binding of Mg(2+ modulates the behavior of the 5'-neighboring step by increasing the BII (ε-ζ>0° population of its phosphate group. Additional electrostatic interactions between the 5'-phosphate group and Mg(2+ strengthen both the DNA-cation binding and the BII character of the 5'-step. Cation binding in the major groove may therefore locally influence the DNA conformational landscape, suggesting a possible avenue for better understanding how strong DNA distortions can be stabilized in protein-DNA complexes.

  8. Porous composite materials ZrO2(MgO)-MgO for osteoimplantology

    International Nuclear Information System (INIS)

    Buyakov, Ales; Litvinova, Larisa; Shupletsova, Valeria; Kulbakin, Denis; Kulkov, Sergey

    2016-01-01

    The pore structure and phase composition of ceramic composite material ZrO 2 (Mg)-MgO at different sintering temperatures were studied. The main mechanical characteristics of the material were determined and it was shown that they are close to the characteristics of natural bone tissues. It was shown that material structure has a positive effect on the pre-osteoblast cells proliferation. In-vitro studies of pre-osteoblast cells, cultivation on material surface showed a good cell adhesion, proliferation and differentiation of MMSC by osteogenic type.

  9. Sorption of selenium on Mg-Al and Mg-Al-Eu layered double hydroxides

    International Nuclear Information System (INIS)

    Curtius, H.; Paparigas, Z.; Kaiser, G.

    2008-01-01

    Salt domes represent deep geological formations which are under consideration as final repositories for irradiated research reactor fuel elements. For long-term safety aspects the mobilisation of the radionuclides due to a water ingress is intensively investigated. At the Institute of Energy Research (IEF-6), leaching experiments were performed in a hot cell facility with UAl x -Al and U 3 Si 2 -Al dispersed research reactor fuel elements in repository-relevant MgCl 2 -rich salt brines under anaerobic conditions. The fuel plates corroded completely within one year and a Mg-Al-layered double hydroxide (LDH) with chloride as interlayer anion was identified as one crystalline phase component of the corrosion products (secondary phases). This Mg-Al-LDH was synthesized, characterized, and the ability to retard europium by an incorporation process was investigated. Europium, as a representative for lanthanides, was identified to be one of the radionuclides which were found in the corrosion products. We could show that europium was incorporated in the lattice structure. LDHs have high anion exchange capacities that enhance their potential to remove anionic contaminants from aqueous systems. In this work the sorption behaviour of selenium in the chemical form as selenite (SeO 3 2- ) on Mg-Al-LDH and on Mg-Al-Eu-LDH was investigated. Especially the influence of the larger europium-III ion was of interest. It represents in the Mg-Al-Eu-LDH about 10% of the molar aluminium amount. The sorption has been experimentally studied in a wide range of pH, ionic strength, radionuclide and sorbent concentration. Both LDHs with chloride as interlayer anion were synthesized by a coprecipitation method under controlled conditions, and their main physico-chemical properties were analyzed prior to the sorption experiments. The sorption kinetics of selenite on the LDHs in water and in MgCl 2 -rich brine were rapid using a LDH concentration of 10 g/L. Equilibrium, indicated by stable p

  10. Porous composite materials ZrO{sub 2}(MgO)-MgO for osteoimplantology

    Energy Technology Data Exchange (ETDEWEB)

    Buyakov, Ales, E-mail: alesbuyakov@gmail.com [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); National Research Tomsk State University, Tomsk, 634050 (Russian Federation); Litvinova, Larisa, E-mail: larisalitvinova@yandex.ru; Shupletsova, Valeria, E-mail: vshupletsova@mail.ru [Immanuel Kant Baltic Federal University, Kaliningrad (Russian Federation); Kulbakin, Denis, E-mail: kulbakin2012@gmail.com [Tomsk Cancer Research Institute, Tomsk, 634050 (Russian Federation); Kulkov, Sergey, E-mail: kulkov@ispms.ru [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); National Research Tomsk State University, Tomsk, 634050 (Russian Federation); National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation)

    2016-08-02

    The pore structure and phase composition of ceramic composite material ZrO{sub 2}(Mg)-MgO at different sintering temperatures were studied. The main mechanical characteristics of the material were determined and it was shown that they are close to the characteristics of natural bone tissues. It was shown that material structure has a positive effect on the pre-osteoblast cells proliferation. In-vitro studies of pre-osteoblast cells, cultivation on material surface showed a good cell adhesion, proliferation and differentiation of MMSC by osteogenic type.

  11. Role of dopants in LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P detectors

    International Nuclear Information System (INIS)

    Mohammadi, Kh.; Moussavi Zarandi, A.; Afarideh, H.; Shahmaleki, S.

    2013-01-01

    In this study, electronic structure of LiF crystal doped with Mg,Cu,P impurities was studied with WIEN2k code on the basis of FPLAPW+lo method. Results show that in Mg-doped LiF composition, an electronic trap was created with impurity concentration of 1.56% and 3.125%. In this condition, the electronic trap with increasing the percentage of the impurities up to 4.687% is annihilated. It was found, that by doping of Mg and Cu or P simultaneously, a hole-trap is created in valence band. It was realized that in LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P, Cu impurity and Li atom, have a key role in creation of levels which lead to create electronic and hole traps. Mg impurity and F atom, only have a role in creation of electronic traps. In addition, P impurity has a main role in creation of the electronic and hole traps in LiF:Mg,Cu,P. The activation energy of electronic and hole trap in LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P crystalline lattice were obtained as 0.3 and 5.5 eV, 0.92 and 3.4 eV and 0.75 and 3.1 eV, respectively. - Graphical abstract: Figure (a) and (b) shows changes in electronic structure and band gap energy of LiF crystal due to presence of Mg and Cu, Mg and P ions respectively. - Highlights: • Electronic structure of LiF, LiF:Mg,Cu, LiF:Mg,P and LiF:Mg,Cu,P materials were studied with WIEN2K code. • In LiF:Mg,Cu and LiF:Mg,Cu,P, Li atom and Cu impurity have a key role in creation of levels. • F atom and Mg impurity only have a role in creation of electronic traps. • In LiF:Mg,Cu,P, P impurity has a main role in creation of electronic and hole traps

  12. Ab initio study of MgH2 formation

    International Nuclear Information System (INIS)

    Novakovic, Nikola; Matovic, Ljiljana; Novakovic, Jasmina Grbovic; Manasijevic, Miodrag; Ivanovic, Nenad

    2009-01-01

    Even if there is considerable literature dealing with structure and properties of MgH 2 compound there are still some uncertain details about nature of bonding governing its formation and decomposition. In order to better understand the processes essential for absorption and desorption of MgH 2 , ab initio DFT based calculations of rutile MgH 2 compound, elemental hcp-Mg, and three different hypothetical hcp-Mg-derived hydrides are performed. Our findings show that all structures are unstable, and that MgH (Wurtzite) is a closest possible candidate for intermediate phase between the hcp-Mg and MgH 2 at 1:1 stoichiometry. An alternative hydration pathway is suggested, including promotion of hcp-Mg to bcc-Mg and consecutive transformation to rutile MgH 2 by means of hydrogen incorporation into Mg matrix. Rutile MgH 2 calculations with various hydrogen vacancies concentration are performed. Calculation shows that at high hydrogen concentration close to 1:2, stable substoichiometric hydride is possible. Calculation also shows that high vacancy (low hydrogen) concentration favors bcc-Mg 2 H over rutile Mg 2 H structure.

  13. The Influence of MgH2 on the Assessment of Electrochemical Data to Predict the Degradation Rate of Mg and Mg Alloys

    Directory of Open Access Journals (Sweden)

    Wolf-Dieter Mueller

    2014-06-01

    Full Text Available Mg and Mg alloys are becoming more and more of interest for several applications. In the case of biomaterial applications, a special interest exists due to the fact that a predictable degradation should be given. Various investigations were made to characterize and predict the corrosion behavior in vitro and in vivo. Mostly, the simple oxidation of Mg to Mg2+ ions connected with adequate hydrogen development is assumed, and the negative difference effect (NDE is attributed to various mechanisms and electrochemical results. The aim of this paper is to compare the different views on the corrosion pathway of Mg or Mg alloys and to present a neglected pathway based on thermodynamic data as a guideline for possible reactions combined with experimental observations of a delay of visible hydrogen evolution during cyclic voltammetry. Various reaction pathways are considered and discussed to explain these results, like the stability of the Mg+ intermediate state, the stability of MgH2 and the role of hydrogen overpotential. Finally, the impact of MgH2 formation is shown as an appropriate base for the prediction of the degradation behavior and calculation of the corrosion rate of Mg and Mg alloys.

  14. Vibrational spectra of 1-hydroxy- and 1,4-dihydroxyanthraquinones and their magnesium chelate complexes. I. Isotopic effects of OH/OD and 24Mg/26Mg substitutions

    International Nuclear Information System (INIS)

    Kirszenbaum, Marek

    1977-01-01

    The vibrational spectra of 1-hydroxy- and 1,4-dihydroxyanthraquinones, their deuterated derivatives and their 24 Mg/ 26 Mg chelate complexes are examined in the spectral region 1700-250cm -1 . The study of deuteroxyanthraquinones allow an assignment of the OH/OD group vibrations and show the multiple coupling of the delta OH vibrations with the vCC and delta CH quinonic vibrations. These results lead to a modification of some spectral assignments of magnesium chelate complexe of 1-OH-AQ. The isotopic 24 Mg/ 26 Mg substitution enables the chelate ring vibrations which depend on the motions of the magnesium atom to be observed. The vC=O and vC-O vibrations frequencies of magnesium chelate complexe [Mg(1,4-O 2 -AQ)]sub(n) show an important difference of the chelate ring electronic state in comparison of those of 1,4-(OH) 2 -AQ. The discussion of the infrared and Raman spectra in the Mg-O vibrations region lead to the conclusion that the configuration of oxygens arround the magnesium is tetrahedral [fr

  15. The role of MgO content in ex situ MgB2 wires

    DEFF Research Database (Denmark)

    Kovac, P.; Hugek, I.; Meligek, T.

    2004-01-01

    An experimental study of the effect of MgO content in the MgB2 powder used for ex situ made composite wires was carried out. Two single-core MgB2/Fe/Cu wires were made using commercial MgB2 powders from Alfa Aesar containing different fraction of MgO. Critical temperature and critical currents of...

  16. Positron annihilation study of formation of Mg vacancy in MgO

    International Nuclear Information System (INIS)

    Mizuno, M.; Araki, H.; Shirai, Y.; Inoue, Y.; Sugita, K.; Mizoguchi, T.; Tanaka, I.; Adachi, H.

    2004-01-01

    We have investigated the formation of Mg vacancy induced by ultra-dilute trivalent impurities in MgO by a combination of positron annihilation measurement and theoretical calculations of positron lifetimes. The undoped MgO yields the shortest positron lifetime of 130 ps that is shorter than that of 166 ps previously reported using a single crystal sample. The positron lifetime of the doped samples increases with the increase of the Al or Ga dopant concentration and is saturated at around 170 ps. This result indicates that the previously reported value of 166 ps is ascribed to not the bulk but the vacancy state induced by impurities. The experimental bulk lifetime of 130 ps, which is obtained by employing trapping model, is well reproduced by the theoretical calculation using the semiconductor model. The calculated defect lifetime is about 20 ps longer than the experimental value. This may be due to the lattice relaxation around Mg vacancy associated with the trapping of positrons. (orig.)

  17. Positron annihilation study of formation of Mg vacancy in MgO

    Energy Technology Data Exchange (ETDEWEB)

    Mizuno, M.; Araki, H.; Shirai, Y. [Science and Technology Center for Atoms, Molecules and Ions Control, Osaka Univ., Osaka (Japan); Inoue, Y.; Sugita, K. [Dept. of Materials Science and Engineering, Osaka Univ., Osaka (Japan); Mizoguchi, T.; Tanaka, I.; Adachi, H. [Dept. of Materials Science and Engineering, Kyoto Univ., Kyoto (Japan)

    2004-07-01

    We have investigated the formation of Mg vacancy induced by ultra-dilute trivalent impurities in MgO by a combination of positron annihilation measurement and theoretical calculations of positron lifetimes. The undoped MgO yields the shortest positron lifetime of 130 ps that is shorter than that of 166 ps previously reported using a single crystal sample. The positron lifetime of the doped samples increases with the increase of the Al or Ga dopant concentration and is saturated at around 170 ps. This result indicates that the previously reported value of 166 ps is ascribed to not the bulk but the vacancy state induced by impurities. The experimental bulk lifetime of 130 ps, which is obtained by employing trapping model, is well reproduced by the theoretical calculation using the semiconductor model. The calculated defect lifetime is about 20 ps longer than the experimental value. This may be due to the lattice relaxation around Mg vacancy associated with the trapping of positrons. (orig.)

  18. Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants

    International Nuclear Information System (INIS)

    Uddin, M S; Hall, Colin; Murphy, Peter

    2015-01-01

    Due to their excellent biodegradability characteristics, Mg and Mg-based alloys have become an emerging material in biomedical implants, notably for repair of bone as well as coronary arterial stents. However, the main problem with Mg-based alloys is their rapid corrosion in aggressive environments such as human bodily fluids. Previously, many approaches such as control of alloying materials, composition and surface treatments, have been attempted to regulate the corrosion rate. This article presents a comprehensive review of recent research focusing on surface treatment techniques utilised to control the corrosion rate and surface integrity of Mg-based alloys in both in vitro and in vivo environments. Surface treatments generally involve the controlled deposition of thin film coatings using various coating processes, and mechanical surfacing such as machining, deep rolling or low plasticity burnishing. The aim is to either make a protective thin layer of a material or to change the micro-structure and mechanical properties at the surface and sub-surface levels, which will prevent rapid corrosion and thus delay the degradation of the alloys. We have organised the review of past works on coatings by categorising the coatings into two classes—conversion and deposition coatings—while works on mechanical treatments are reviewed based on the tool-based processes which affect the sub-surface microstructure and mechanical properties of the material. Various types of coatings and their processing techniques under two classes of coating and mechanical treatment approaches have been analysed and discussed to investigate their impact on the corrosion performance, biomechanical integrity, biocompatibility and cell viability. Potential challenges and future directions in designing and developing the improved biodegradable Mg/Mg-based alloy implants were addressed and discussed. The literature reveals that no solutions are yet complete and hence new and innovative approaches

  19. Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants

    Science.gov (United States)

    Uddin, M S; Hall, Colin; Murphy, Peter

    2015-01-01

    Due to their excellent biodegradability characteristics, Mg and Mg-based alloys have become an emerging material in biomedical implants, notably for repair of bone as well as coronary arterial stents. However, the main problem with Mg-based alloys is their rapid corrosion in aggressive environments such as human bodily fluids. Previously, many approaches such as control of alloying materials, composition and surface treatments, have been attempted to regulate the corrosion rate. This article presents a comprehensive review of recent research focusing on surface treatment techniques utilised to control the corrosion rate and surface integrity of Mg-based alloys in both in vitro and in vivo environments. Surface treatments generally involve the controlled deposition of thin film coatings using various coating processes, and mechanical surfacing such as machining, deep rolling or low plasticity burnishing. The aim is to either make a protective thin layer of a material or to change the micro-structure and mechanical properties at the surface and sub-surface levels, which will prevent rapid corrosion and thus delay the degradation of the alloys. We have organised the review of past works on coatings by categorising the coatings into two classes—conversion and deposition coatings—while works on mechanical treatments are reviewed based on the tool-based processes which affect the sub-surface microstructure and mechanical properties of the material. Various types of coatings and their processing techniques under two classes of coating and mechanical treatment approaches have been analysed and discussed to investigate their impact on the corrosion performance, biomechanical integrity, biocompatibility and cell viability. Potential challenges and future directions in designing and developing the improved biodegradable Mg/Mg-based alloy implants were addressed and discussed. The literature reveals that no solutions are yet complete and hence new and innovative approaches

  20. A randomized, controlled trial of 3.0 mg of Liraglutide in weight management

    DEFF Research Database (Denmark)

    Pi-Sunyer, Xavier; Astrup, Arne; Fujioka, Ken

    2015-01-01

    Background Obesity is a chronic disease with serious health consequences, but weight loss is difficult to maintain through lifestyle intervention alone. Liraglutide, a glucagon-like peptide-1 analogue, has been shown to have potential benefit for weight management at a once-daily dose of 3.0 mg...... or untreated dyslipidemia or hypertension. We randomly assigned patients in a 2:1 ratio to receive once-daily subcutaneous injections of liraglutide at a dose of 3.0 mg (2487 patients) or placebo (1244 patients); both groups received counseling on lifestyle modification. The coprimary end points were...... with liraglutide were mild or moderate nausea and diarrhea. Serious events occurred in 6.2% of the patients in the liraglutide group and in 5.0% of the patients in the placebo group. Conclusions In this study, 3.0 mg of liraglutide, as an adjunct to diet and exercise, was associated with reduced body weight...

  1. Enhancing photocatalytic activity by using TiO2-MgO core-shell-structured nanoparticles

    International Nuclear Information System (INIS)

    Jung, Hyun Suk; Lee, Jung-Kun; Nastasi, Michael; Kim, Jeong-Ryeol; Lee, Sang-Wook; Kim, Jin Young; Park, Jong-Sung; Hong, Kug Sun; Shin, Hyunho

    2006-01-01

    Hygroscopic Mg(OH) 2 gel was topotactically decomposed on TiO 2 particle surfaces, resulting in highly nanoporous MgO-coated TiO 2 particles. The highly hygroscopic and nanoporous MgO shell absorbed more water molecules and hydroxyl groups from the environment to yield an improved photocatalytic property of the core-shell particles as compared to the uncoated TiO 2 counterpart

  2. Comparison of initial loading doses of 5 mg and 10 mg for warfarin therapy

    Directory of Open Access Journals (Sweden)

    Sidnei Lastória

    2014-03-01

    Full Text Available CONTEXT: The question of what is the best loading dosage of warfarin when starting anticoagulant treatment has been under discussion for ten years. We were unable to find any comparative studies of these characteristics conducted here in Brazil. OBJECTIVE: To compare the safety and efficacy of two initial warfarin dosage regimens for anticoagulant treatment. METHODS: One-hundred and ten consecutive patients of both sexes, with indications for anticoagulation because of venous or arterial thromboembolism, were analyzed prospectively. During the first 3 days of treatment, these patients were given adequate heparin to keep aPTT (activated partial thromboplastin time between 1.5 and 2.5, plus 5 mg of warfarin. From the fourth day onwards, their warfarin doses were adjusted using International Normalized Ratios (INR; target range: 2 to 3. This prospective cohort was compared with a historical series of 110 patients had been given 10 mg of warfarin on the first 2 days and 5 mg on the third day with adjustments based on INR thereafter. Outcomes analyzed were as follows: recurrence of thromboembolism, bleeding events and time taken to enter the therapeutic range. RESULTS: Efficacy, safety and length of hospital stay were similar in both samples. The sample that were given 10 mg entered the therapeutic range earlier (means: 4.5 days vs. 5.8 days, were on lower doses at discharge and had better therapeutic indicators at the first return appointment. CONCLUSIONS: The 10 mg dosage regimen took less time to attain the therapeutic range and was associated with lower warfarin doses at discharge and better INR at first out-patients follow-up visit.

  3. Mg-enriched erythrite from Bou Azzer, Anti-Atlas Mountains, Morocco: geochemical and spectroscopic characteristics

    Science.gov (United States)

    Dumańska-Słowik, Magdalena; Pieczka, Adam; Natkaniec-Nowak, Lucyna; Kunecki, Piotr; Gaweł, Adam; Heflik, Wiesław; Smoliński, Wojciech; Kozub-Budzyń, Gabriela

    2018-06-01

    Supergene Mg-enriched erythrite, with an average composition (Co2.25Mg0.58Ni0.14Fe0.04Mn0.02 Zn0.02) (As1.97PMorocco. The unit cell parameters of monoclinic Mg-enriched erythrite [space group C2/ m, a = 10.252(2) Å, b = 13.427(3) Å, c = 4.757(3) Å, ß = 105.12(1)°] make the mineral comparable with erythrite from other localities. The composition of the sample represents the solid solution between erythrite, hörnesite and annabergite, that is, the nearest to the endmember erythrite. However, Mg-enriched erythrite forming the crystal exhibits variable compositions, especially in Mg and Co contents, with Mg increasing from 0.32 up to 1.39 apfu, and Co decreasing from 2.53 to 1.50 apfu, which manifests in the fine compositional oscillatory zoning. It is the highest content of Mg in erythrite structure reported so far. The most intensive Raman active ν3 and ν1 bands, recorded for the crystal's zones with maximum Mg contents, occur at 865 and 800 cm- 1 and are shifted towards higher wavenumbers, where normally hörnesite Raman bands appear. The characteristic oscillatory zoning texture results from varying contents of main and trace elements mobilized from the host ores (Co arsenides, mainly skutterudite) and rock-forming minerals (among others, dolomite) by the solutions in the oxidation zone of the ore deposits. The heating of the Mg-enriched erythrite up to 1000 °C leads to the crystallization of the water-free (Co,Mg)3(AsO4)2 phase.

  4. Spectroscopic, thermal, and electrical properties of MgO/ polyvinyl pyrrolidone/ polyvinyl alcohol nanocomposites

    Science.gov (United States)

    Mohammed, Gh.; El Sayed, Adel M.; Morsi, W. M.

    2018-04-01

    In this study, we aimed to control the optical and electrical properties of polyvinyl alcohol (PVA) in order to broaden its industrial and technological applications, which we achieved by blending PVA with polyvinyl pyrrolidone (PVP) and adding sol-gel prepared MgO nanopowder. The blended film and nanocomposite films were prepared using the solution casting technique. X-ray diffraction analyses showed that the crystallite size was ∼18.4 nm for MgO and the highest degree of crystallinity (XC) in the films was about 24.34% at 1.0 wt% MgO. High resolution transmission electron microscopy determined the nanoribbon morphology of MgO. Scanning electron microscopy (SEM) indicated the uniform distribution of the MgO nanoribbons on the surfaces of the PVA/PVP films. SEM and Fourier transform infrared spectroscopy also confirmed the interaction between the blend and MgO fillers. The effects of the additives on the glass transition (Tg) and melting (Tm) temperatures were evaluated by differential thermal analysis and differential scanning calorimetry. The appearance of one melting point confirmed the miscibility of the two polymers. According to ultraviolet-visible-near infrared spectroscopy measurements, the optical properties and optical constants of PVA could be adjusted by the addition of PVP and MgO, where the optical band gap (Eg) determined for PVA increased with the PVP content, whereas it decreased to 4.8 eV as the MgO content increased. The DC conductivity (σdc) of the films increased whereas the activation energy (Ea) decreased after the addition of MgO, possibly because the nanoribbon shape fixed the preferred conducting pathways. In addition, MgO could break the H-bond in sbnd OH groups of the blends to allow the free movement of the molecular chains.

  5. Correlation between E-cadherin-regulated cell adhesion and human osteosarcoma MG-63 cell anoikis.

    Science.gov (United States)

    Lin, Ding-Sheng; Cai, Le-Yi; Ding, Jian; Gao, Wei-Yang

    2014-01-01

    The aim of this study was to investigate the relationship between cell adhesion and anoikis evasion among human osteosarcoma cells (MG-63), and to further study the molecular mechanisms. Human osteosarcoma cells (MG-63) were assessed for apoptosis, and caspase-3, E-cadherin and β-catenin expression in EDTA and control non-EDTA groups. MG-63 cells were predominantly aggregated when in suspension, and the suspended cells were more dispersed in the EDTA group. Following culture in suspension for 24 h, 48 h, or 72 h, the rates of apoptosis were 34.88%±3.64%, 59.3%±7.22% and 78.5%±5.21% in the experimental group and 7.34%±2.13%, 14.7%±3.69%, and 21.4%±3.60% in the control group, respectively. Caspase-3 expression progressively increased and E-cadherin and β-catenin were decreased in the experimental group, whereas there was no change in the control group. MG-63 cells could avoid anoikis through cell adhesion, and E-cadherin might play a role in this process.

  6. Fabrication of hierarchical core-shell polydopamine@MgAl-LDHs composites for the efficient enrichment of radionuclides

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Kairuo [Key Laboratory of Novel Thin Film Solar Cells, Institute of Plasma Physics, Chinese Academy Sciences, P.O. Box 1126, Hefei, 230031 (China); Collaborative Innovation Center of Radiation Medicine of Jiangsu Higher Education Institutions, Soochow University, Suzhou, 215123 (China); Lu, Songhua; Gao, Yang; Zhang, Rui; Tan, Xiaoli [Key Laboratory of Novel Thin Film Solar Cells, Institute of Plasma Physics, Chinese Academy Sciences, P.O. Box 1126, Hefei, 230031 (China); Chen, Changlun, E-mail: clchen@ipp.ac.cn [Key Laboratory of Novel Thin Film Solar Cells, Institute of Plasma Physics, Chinese Academy Sciences, P.O. Box 1126, Hefei, 230031 (China); Collaborative Innovation Center of Radiation Medicine of Jiangsu Higher Education Institutions, Soochow University, Suzhou, 215123 (China); AAM Research Group, Faculty of Science, King Abdulaziz University, Jeddah 21589 (Saudi Arabia)

    2017-02-28

    Highlights: • Novel hierarchical core/shell structured PDA@MgAl-LDHs were prepared. • PDA@MgAl-LDHs exhibited higher sorption ability for U(VI) and Eu(III). • PDA@MgAl-LDHs were promising materials for the enrichment of radionuclides. - Abstract: Novel hierarchical core/shell structured polydopamine@MgAl-layered double hydroxides (PDA@MgAl-LDHs) composites involving MgAl-layered double hydroxide shells and PDA cores were fabricated thought one-pot coprecipitation assembly and methodically characterized by X-ray diffraction, Fourier transformed infrared spectroscopy, scanning/transmission electron microscopy, selected area electron diffraction, elemental mapping, thermogravimetric analysis and X-ray photoelectron spectroscopy technologies. U(VI) and Eu(III) sorption experiments showed that the PDA@MgAl-LDHs exhibited higher sorption ability with a maximum sorption capacity of 142.86 and 76.02 mg/g at 298 K and pH 4.5, respectively. More importantly, according to XPS analyses, U(VI) and Eu(III) were sorbed on PDA@MgAl-LDHs via oxygen-containing functional groups, and the chemical affinity of U(VI) by oxygen-containing functional groups is higher than that of Eu(III). These observations show great expectations in the enrichment of radionuclides from aquatic environments by PDA@MgAl-LDHs.

  7. [Analgesic effect and clinical tolerability of the combination of paracetamol 500 mg and caffeine 50 mg versus paracetamol 400 mg and dextropropoxyphene 30 mg in back pain].

    Science.gov (United States)

    Kuntz, D; Brossel, R

    1996-09-07

    A double-blind randomized multicentric study was performed to test the hypothesis that the analgesic effect of paracetamol-cafeine is equivalent to that of paracetamol-dextropropoxyphen in patients suffering from pain due to osteoarthritis of the spine. Rhumatologists included 124 patients who were randomized into two groups of 62 each. Pain was measured daily during the seven-day treatment Huskisson's Analog Visual Scales; 112 were per protocol and evaluable. The two treatment groups were statistically similar for demographics, vital signs, medical and treatment history. A majority of them had pain located at the lumbar spine only; the other patients had either pain at the cervical or dorsal spine or at several sites. At the end of the week there was a major reduction in pain level: 51.2% in patients given paracetamol-cafeine and 47.0% in those given paracetamol-dextropropoxyphen. The main criteria of efficacy--the percentage of success (decrease of pain > 50%)--was similar in the two groups as well in the intention-to-treat population (p = 0.01) as the per protocol population (p = 0.028). Kinetics of pain decrease during the first day of treatment were assessed with an hourly evaluation during the six first hours and at the 12th hour. There was no difference between the two groups. There was no serious adverse event and the frequency and intensity of the adverse events were similar in the two groups. The potentializing action of cafeine on paracetamol-induced pain relief enables a degree of pain relief equivalent to that of a combination using an analgesic with a peripheral action, paracetamol, and another with a central action, dextropoxyphen. The fact that the paracetamol-cafeine combination does not have a central action avoids secondary effects induced by central analgesics (drowsiness, constipation) in patients with osteoarthritis back pain.

  8. Performance of Mg-14Li-1Al-0.1Ce as anode for Mg-air battery

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Yibin; Li, Deyu [School of Chemical Engineering and Technology, Harbin Institute of Technology, West Street No. 92, Harbin 150001 (China); Li, Ning [School of Chemical Engineering and Technology, Harbin Institute of Technology, West Street No. 92, Harbin 150001 (China); Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001 (China); Zhang, Milin; Huang, Xiaomei [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001 (China)

    2011-02-15

    In this research, a new Mg-air battery based on Mg-14Li-1Al-0.1Ce was prepared and the battery performance was investigated by constant current discharge test. The corrosion behavior of Mg, AZ31 and Mg-Li-Al-Ce were studied by self-corrosion rate measurement and potentiodynamic polarization measurement. The characteristics of Mg-Li-Al-Ce after discharge were investigated by electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results show that Mg-Li-Al-Ce is more active than Mg and AZ31. The self-corrosion rate is found to be in the order: Mg-Li-Al-Ce < Mg < AZ31. It has been observed that the Mg-air battery based on Mg-Li-Al-Ce offers higher operating voltage, anodic efficiency and capacity than those with Mg and AZ31. SEM and EIS results show that the discharge product of Mg-Li-Al-Ce is loosely adhered to the alloy surface, and thus Mg-Li-Al-Ce could keep high discharge activity during discharge. (author)

  9. Photodissociation spectroscopy of the Mg+-acetic acid complex

    Science.gov (United States)

    Abate, Yohannes; Kleiber, P. D.

    2006-11-01

    We have studied the structure and photodissociation of Mg+-acetic acid clusters. Ab initio calculations suggest four relatively strongly bound ground state isomers for the [MgC2H4O2]+ complex. These isomers include the cis and trans forms of the Mg+-acetic acid association complex with Mg+ bonded to the carbonyl O atom of acetic acid, the Mg+-acetic acid association complex with Mg+ bonded to the hydroxyl O atom of acetic acid, or to a Mg+-ethenediol association complex. Photodissociation through the Mg+-based 3p←3s absorption bands in the near UV leads to direct (nonreactive) and reactive dissociation products: Mg+, MgOH+, Mg(H2O )+, CH3CO+, and MgCH3+. At low energies the dominant reactive quenching pathway is through dehydration to Mg(H2O)+, but additional reaction channels involving C-H and C-C bond activation are also open at higher energies.

  10. RAPID COMMUNICATION: Formation of MgB2 at ambient temperature with an electrochemical process: a plausible mechanism

    Science.gov (United States)

    Jadhav, A. B.; Subhedar, K. M.; Hyam, R. S.; Talaptra, A.; Sen, Pintu; Bandyopadhyay, S. K.; Pawar, S. H.

    2005-06-01

    The binary intermetallic MgB2 superconductor has been synthesized by many research groups. However, the mechanism of its formation is not clearly understood. In this communication, a comprehensive mechanism of the formation of MgB2 from Le Chatelier's principle of equilibrium reaction has been explained both for solid-state reaction and electrodeposition methods.

  11. Mg-Ca Alloys Produced by Reduction of CaO: Understanding of ECO-Mg Alloy Production

    Science.gov (United States)

    Jung, In-Ho; Lee, Jin Kyu; Kim, Shae K.

    2017-04-01

    There have been long debates about the environment conscious (ECO) Mg technology which utilizes CaO to produce Ca-containing Mg alloys. Two key process technologies of the ECO-Mg process are the chemical reduction of CaO by liquid Mg and the maintenance of melt cleanliness during the alloying of Ca. Thermodynamic calculations using FactSage software were performed to explain these two key issues. In addition, an experimental study was performed to compare the melt cleanliness of the Ca-containing Mg alloys produced by the conventional route with metallic Ca and the ECO-Mg route with CaO.

  12. Thermodynamic properties of Mg2Si and Mg2Ge investigated by first principles method

    International Nuclear Information System (INIS)

    Wang, Hanfu; Jin, Hao; Chu, Weiguo; Guo, Yanjun

    2010-01-01

    The lattice dynamics and thermodynamic properties of Mg 2 Si and Mg 2 Ge are studied based on the first principles calculations. We obtain the phonon dispersion curves and phonon density of states spectra using the density functional perturbation theory with local density approximations. By employing the quasi-harmonic approximation, we calculate the temperature dependent Helmholtz free energy, bulk modulus, thermal expansion coefficient, specific heat, Debye temperature and overall Grueneisen coefficient. The results are in good agreement with available experimental data and previous theoretical studies. The thermal conductivities of both compounds are then estimated with the Slack's equation. By carefully choosing input parameters, especially the acoustic Debye temperature, we find that the calculated thermal conductivities agree fairly well with the experimental values above 80 K for both compounds. This demonstrates that the lattice thermal conductivity of simple cubic semiconductors may be estimated with satisfactory accuracy by combining the Slack's equation with the necessary thermodynamics parameters derived completely from the first principles calculations.

  13. Relativistic quasiparticle band structures of Mg2Si, Mg2Ge, and Mg2Sn: Consistent parameterization and prediction of Seebeck coefficients

    Science.gov (United States)

    Shi, Guangsha; Kioupakis, Emmanouil

    2018-02-01

    We apply density functional and many-body perturbation theory calculations to consistently determine and parameterize the relativistic quasiparticle band structures of Mg2Si, Mg2Ge, and Mg2Sn, and predict the Seebeck coefficient as a function of doping and temperature. The quasiparticle band gaps, including spin-orbit coupling effects, are determined to be 0.728 eV, 0.555 eV, and 0.142 eV for Mg2Si, Mg2Ge, and Mg2Sn, respectively. The inclusion of the semicore electrons of Mg, Ge, and Sn in the valence is found to be important for the accurate determination of the band gaps of Mg2Ge and Mg2Sn. We also developed a Luttinger-Kohn Hamiltonian and determined a set of band parameters to model the near-edge relativistic quasiparticle band structure consistently for all three compounds that can be applied for thermoelectric device simulations. Our calculated values for the Seebeck coefficient of all three compounds are in good agreement with the available experimental data for a broad range of temperatures and carrier concentrations. Our results indicate that quasiparticle corrections are necessary for the accurate determination of Seebeck coefficients at high temperatures at which bipolar transport becomes important.

  14. Decomposition of supersaturated solid solutions Mg-Ho and Mg-Gd

    International Nuclear Information System (INIS)

    Sukhanov, V.D.; Dobromyslov, A.V.; Rokhlin, L.L.; Dobatkina, T.V.

    2002-01-01

    Methods of electron microscopy and X-ray diffraction analysis are applied to study ageing magnesium base alloys with holmium and gadolinium. It is shown that the precipitation of supersaturated Mg base solid solutions goes through several subsequent stages and is accompanied by a considerable precipitation hardening effect at the stage of metastable phase precipitation. The influence of aging time and temperature on precipitation kinetics is established [ru

  15. Synthesis and crystal structure of Mg0.5NbO2: An ion-exchange reaction with Mg2+ between trigonal [NbO2]- layers

    Science.gov (United States)

    Miura, Akira; Takei, Takahiro; Kumada, Nobuhiro

    2013-01-01

    A new layered niobate, Mg0.5NbO2, was synthesized from LiNbO2 through a cation-exchange reaction with Mg2+ at 450-550 °C. This is the first example of a topotactic reaction with an aliovalent cation between trigonal [NbO2]- layers. It is proposed to be isostructural with LiNbO2 (space group; P63/mmc) with lattice parameters of a=2.9052(6) Å, c=10.625(15) Å. The lattice parameters and formation energy of Mg0.5NbO2 crystallized in LiNbO2 form and other layered CaNb2O4 one were calculated by density functional theory.

  16. Simulation of precipitation and strengthening in MG-RE alloys

    OpenAIRE

    Liu, Hong

    2017-01-01

    Magnesium - rare earth (Mg-RE) alloys have received considerable attention in the past decades for wider applications in the aerospace industry due to their relatively high strength and excellent creep resistance. Most rare-earth containing magnesium alloys, such as Mg-Y, Mg-Gd, and Mg-Y-Nd, are precipitation hardenable. A technical barrier to the wider applications of such alloys is the lack of a sufficiently large age hardening response. To further improve this response, an improved underst...

  17. Combinatorial search for hydrogen storage alloys: Mg-Ni and Mg-Ni-Ti

    Energy Technology Data Exchange (ETDEWEB)

    Oelmez, Rabia; Cakmak, Guelhan; Oeztuerk, Tayfur [Dept. of Metallurgical and Materials Engineering, Middle East Technical University, 06531 Ankara (Turkey)

    2010-11-15

    A combinatorial study was carried out for hydrogen storage alloys involving processes similar to those normally used in their fabrication. The study utilized a single sample of combined elemental (or compound) powders which were milled and consolidated into a bulk form and subsequently deformed to heavy strains. The mixture was then subjected to a post annealing treatment, which brings about solid state reactions between the powders, yielding equilibrium phases in the respective alloy system. A sample, comprising the equilibrium phases, was then pulverized and screened for hydrogen storage compositions. X-ray diffraction was used as a screening tool, the sample having been examined both in the as processed and the hydrogenated state. The method was successfully applied to Mg-Ni and Mg-Ni-Ti yielding the well known Mg{sub 2}Ni as the storage composition. It is concluded that a partitioning of the alloy system into regions of similar solidus temperature would be required to encompass the full spectrum of equilibrium phases. (author)

  18. Mg-lattice associations in red coralline algae

    Science.gov (United States)

    Kamenos, N. A.; Cusack, M.; Huthwelker, T.; Lagarde, P.; Scheibling, R. E.

    2009-04-01

    Recent investigations have shown red coralline algae to record ambient temperature in their calcite skeletons. Temperature recorded by variation in Mg concentrations within algal growth bands has sub-annual resolution and high accuracy. The conversion of Mg concentration to temperature is based on the assumption of Ca replacement by Mg within the algal calcite skeleton at higher temperatures. While Mg-temperature relationships in coralline algae have been calibrated for some species, the location of Mg within the calcite lattice remains unknown. Critically, if Mg is not a lattice component but associated with organic components this could lead to erroneous temperature records. Before coralline algae are used in large scale climate reconstructions it is therefore important to determine the location of Mg. Synchrotron Mg-X-ray absorbance near edge structure (XANES) indicates that Mg is associated with the calcite lattice in Lithothamnion glaciale (contemporary free-living, contemporary encrusting and sub-fossil free-living) and Phymatolithon calcareum (contemporary free-living) coralline algae. Mg is deposited within the calcite lattice in all seasons ( L. glaciale & P. calcareum) and thallus areas ( P. calcareum). These results suggest L. glaciale and P. calcareum are robust Mg-palaeotemperature proxies. We suggest that similar confirmation be obtained for Mg associations in other species of red coralline algae aiding our understanding of their role in climate reconstruction at large spatial scales.

  19. Reusability enhancement of combustion synthesized MgO/MgAl_2O_4 nanocatalyst in biodiesel production by glow discharge plasma treatment

    International Nuclear Information System (INIS)

    Rahmani Vahid, Behgam; Haghighi, Mohammad; Alaei, Shervin; Toghiani, Javad

    2017-01-01

    Graphical abstract: MgO/MgAl_2O_4 nanocatalyst synthesized by impregnation/combustion methods and treated by plasma. FESEM, XRD, EDX, BET-BJH, TG and FTIR analyses were used to investigate the physicochemical characteristics of the nanocatalysts. The nanocatalysts were used in biodiesel production to evaluate and compare their activity. The obtained results from reactor test showed almost similar conversion (higher than 95%) for both treated and untreated nanocatalysts. However, in reusability performance, the plasma treated sample indicated better stability. - Highlights: • Efficient dispersion of MgO on combustion synthesized MgAl_2O_4 spinel nanocatalyst. • Enhanced effect of plasma treatment on nanocatalyst synthesis and its structure. • Successful production of biodiesel using nanocatalyst that treated with plasma. • Increasing the nanocatalyst reusability in biodiesel production by plasma treatment. - Abstract: In this study, plasma technology was used to prepare the catalysts for biodiesel production. The base of MgO/MgAl_2O_4 particles was prepared by combustion synthesis method to attain suitable porosity for large molecules of triglyceride and then active phase of MgO was dispersed on the samples by impregnation method. The nanocatalysts were characterized by XRD, FESEM, EDX, BET-BJH, FTIR, TGA and Particle size distribution analyses. In order to evaluation the catalytic activity of the samples in biodiesel production, the transesterification reaction was performed under these conditions: reaction temperature = 110 °C, methanol-to-oil molar ratio = 12, catalyst concentration = 3 wt.% and reaction time = 3 h. XRD and FTIR results confirm successful synthesis of MgO/MgAl_2O_4. Meanwhile, XRD and EDX analyses indicated that MgO in modified sample by plasma has suitable size distribution. FESEM and BET-BJH analyses reveal proper morphology in both samples and showed higher surface area and pore size in plasma treated sample. TG analysis showed that

  20. Prevalence of gastroduodenal ulcers/erosions in patients taking low-dose aspirin with either 15 mg/day of lansoprazole or 40 mg/day of famotidine: The OITA-GF study 2

    Science.gov (United States)

    2013-01-01

    Background The preventive effects of histamine 2 receptor antagonists vs. proton pump inhibitors on low-dose aspirin (LDA)-related gastroduodenal mucosal injury have not been fully investigated. We conducted a cross-sectional study to compare the prevalence of gastroduodenal ulcers or erosions in patients taking LDA with either 40 mg/day of famotidine or 15 mg/day of lansoprazole for at least three months. Methods Of 84 eligible patients, two taking 40 mg/day of famotidine and four taking 15 mg/day of lansoprazole refused to undergo upper gastrointestinal endoscopy. Ultimately, we performed upper gastrointestinal endoscopy in 78 patients taking either 40 mg/day of famotidine (group F, n = 31) or 15 mg/day of lansoprazole (group L, n = 47). The prevalence of gastroduodenal ulcers or erosions and the magnitude of gastric mucosal injury evaluated using modified Lanza scores were compared between the two groups. Results No patients in either group had gastroduodenal ulcers. Gastroduodenal erosions were more prevalent in group F than in group L (48.4% vs. 17.0%, p = 0.005). The modified Lanza scores (mean ± SD) were significantly higher in group F than in group L (0.9 ± 1.3 vs. 0.3 ± 0.7, p = 0.007). A multivariate logistic regression analysis showed that the use of lansoprazole was negatively associated with gastroduodenal erosions. Conclusions This study suggests that 15 mg/day of lansoprazole may be more effective in preventing the development of LDA-related gastroduodenal erosions than 40 mg/day of famotidine. The preventive effects of these two regimens on the development of LDA-related gastroduodenal ulcers require further investigation. PMID:23531145

  1. Prevalence of gastroduodenal ulcers/erosions in patients taking low-dose aspirin with either 15 mg/day of lansoprazole or 40 mg/day of famotidine: the OITA-GF study 2.

    Science.gov (United States)

    Tamura, Akira; Murakami, Kazunari; Kadota, Junichi

    2013-03-26

    The preventive effects of histamine 2 receptor antagonists vs. proton pump inhibitors on low-dose aspirin (LDA)-related gastroduodenal mucosal injury have not been fully investigated. We conducted a cross-sectional study to compare the prevalence of gastroduodenal ulcers or erosions in patients taking LDA with either 40 mg/day of famotidine or 15 mg/day of lansoprazole for at least three months. Of 84 eligible patients, two taking 40 mg/day of famotidine and four taking 15 mg/day of lansoprazole refused to undergo upper gastrointestinal endoscopy. Ultimately, we performed upper gastrointestinal endoscopy in 78 patients taking either 40 mg/day of famotidine (group F, n = 31) or 15 mg/day of lansoprazole (group L, n = 47). The prevalence of gastroduodenal ulcers or erosions and the magnitude of gastric mucosal injury evaluated using modified Lanza scores were compared between the two groups. No patients in either group had gastroduodenal ulcers. Gastroduodenal erosions were more prevalent in group F than in group L (48.4% vs. 17.0%, p = 0.005). The modified Lanza scores (mean ± SD) were significantly higher in group F than in group L (0.9 ± 1.3 vs. 0.3 ± 0.7, p = 0.007). A multivariate logistic regression analysis showed that the use of lansoprazole was negatively associated with gastroduodenal erosions. This study suggests that 15 mg/day of lansoprazole may be more effective in preventing the development of LDA-related gastroduodenal erosions than 40 mg/day of famotidine. The preventive effects of these two regimens on the development of LDA-related gastroduodenal ulcers require further investigation.

  2. The dependence of Raman scattering on Mg concentration in Mg-doped GaN grown by MBE

    International Nuclear Information System (INIS)

    Flynn, Chris; Lee, William

    2014-01-01

    Magnesium-doped GaN (GaN:Mg) films having Mg concentrations in the range 5 × 10 18 –5 × 10 20 cm −3 were fabricated by molecular beam epitaxy. Raman spectroscopy was employed to study the effects of Mg incorporation on the positions of the E 2 and A 1 (LO) lines identifiable in the Raman spectra. For Mg concentrations in excess of 2 × 10 19 cm −3 , increases in the Mg concentration shift both lines to higher wave numbers. The shifts of the Raman lines reveal a trend towards compressive stress induced by incorporation of Mg into the GaN films. The observed correlation between the Mg concentration and the Raman line positions establish Raman spectroscopy as a useful tool for optimizing growth of Mg-doped GaN. (papers)

  3. Synthesis and characterization of LiF: Mg, Ti for ionizing radiations dosimetry

    International Nuclear Information System (INIS)

    Lozano R, I. B.

    2011-01-01

    Among the different thermoluminescence materials (Tl), the LiF:Mg, Ti is the most used for dosimetric purposes, because its equivalence to the human tissue, it has an effective atomic number of 8.14, the best known commercial dosemeter of this kind is the TLD-100. However, because this dosimeter is an imported product, is quite expensive for many research groups and hospitals. The purpose of this work is the optimization of its synthesis, as the dosimetric characterization, so it can replace the imported dosimeters. The synthesis of LiF:Mg, Ti is a careful process, since one of the reagents, the ion fluorine is highly corrosive. In this work the synthesis of the LiF:Mg, Ti was done by the molten substance method, was used LiF of analytical grade and the magnesium (Mg) and titanium (Ti) activators were incorporated in aqueous solution. For to optimize the handle of the material Tl, we elaborated pellets and teflon (Ptfe) was used as agglutinate material, in a 2:3 proportion. First was prepared the LiF, incorporating just Mg as dopant with a concentration of 400 parts per million (ppm). After the Ti with concentrations from 15 to 120 ppm was incorporated keeping fixed the concentration of Mg (400 ppm). The morphological and structural characterization of the Tl material were made by scanning electron microscopy and X-ray diffraction. The optimal concentration of Ti, was determined as a function of the radiation dose sensibility of the Tl material. The material prepared with 60 ppm of the Ti showed a higher sensibility. However, also the rest of the preparations had the requirements recommended by the international agencies to be used in ionizing radiations dosimetry. For the dosimetric characterization were used samples with 400 ppm of Mg, 400 ppm Mg and 30 ppm Ti, 400 ppm Mg and 60 ppm Ti. The LiF:Mg showed its dosimetric peak at 240 C, while the LiF:Mg, Ti (30 ppm and 60 ppm Ti) showed their dosimetric peak at 220 C and 222 C respectively. The study of the Tl

  4. Structural and electronic properties of Mg and Mg-Nb co-doped TiO2 (101) anatase surface

    International Nuclear Information System (INIS)

    Sasani, Alireza; Baktash, Ardeshir; Mirabbaszadeh, Kavoos; Khoshnevisan, Bahram

    2016-01-01

    Highlights: • Formation energy of Mg and Mg-Nb co-doped TiO_2 anatase surface (101) is studied. • Effect of Mg defect to the TiO_2 anatase (101) surface and bond length distribution of the surface is studied and it is shown that Mg defects tend to stay far from each other. • Effect of Mg and Nb to the bond length distribution of the surface studied and it is shown that these defects tend to stay close to each other. • Effects of Mg and Mg-Nb defects on DSSCs using TiO_2 anatase hosting these defects are studied. - Abstract: In this paper, by using density functional theory, Mg and Nb-Mg co-doping of TiO_2 anatase (101) surfaces are studied. By studying the formation energy of the defects and the bond length distribution of the surface, it is shown that Mg defects tend to stay as far as possible to induce least possible lattice distortion while Nb and Mg defects stay close to each other to cause less stress to the surface. By investigating band structure of the surface and changes stemmed from the defects, potential effects of Mg and Mg-Nb co-doping of TiO_2 surface on dye-sensitized solar cells are investigated. In this study, it is shown that the Nb-Mg co-doping could increase J_S_C of the surface while slightly decreasing V_O_C compared to Mg doped surface, which might result in an increase in efficiency of the DSSCs compared to Nb or Mg doped surfaces.

  5. Structural and electronic properties of Mg and Mg-Nb co-doped TiO2 (101) anatase surface

    Energy Technology Data Exchange (ETDEWEB)

    Sasani, Alireza [Department of Science, Karaj Islamic Azad University, Karaj, Alborz, P.O. Box 31485-313 (Iran, Islamic Republic of); Baktash, Ardeshir [Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P.O. Box 87317-51167 (Iran, Islamic Republic of); Mirabbaszadeh, Kavoos, E-mail: mirabbas@aut.ac.ir [Department of Energy Engineering and Physics, Amirkabir University of Technology, Tehran, P. O. Box 15875-4413 (Iran, Islamic Republic of); Khoshnevisan, Bahram [Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P.O. Box 87317-51167 (Iran, Islamic Republic of)

    2016-10-30

    Highlights: • Formation energy of Mg and Mg-Nb co-doped TiO{sub 2} anatase surface (101) is studied. • Effect of Mg defect to the TiO{sub 2} anatase (101) surface and bond length distribution of the surface is studied and it is shown that Mg defects tend to stay far from each other. • Effect of Mg and Nb to the bond length distribution of the surface studied and it is shown that these defects tend to stay close to each other. • Effects of Mg and Mg-Nb defects on DSSCs using TiO{sub 2} anatase hosting these defects are studied. - Abstract: In this paper, by using density functional theory, Mg and Nb-Mg co-doping of TiO{sub 2} anatase (101) surfaces are studied. By studying the formation energy of the defects and the bond length distribution of the surface, it is shown that Mg defects tend to stay as far as possible to induce least possible lattice distortion while Nb and Mg defects stay close to each other to cause less stress to the surface. By investigating band structure of the surface and changes stemmed from the defects, potential effects of Mg and Mg-Nb co-doping of TiO{sub 2} surface on dye-sensitized solar cells are investigated. In this study, it is shown that the Nb-Mg co-doping could increase J{sub SC} of the surface while slightly decreasing V{sub OC} compared to Mg doped surface, which might result in an increase in efficiency of the DSSCs compared to Nb or Mg doped surfaces.

  6. Constraints on the ^22Ne(α,n)^25Mg reaction rate from ^natMg+n Total and ^25Mg(n,γ ) Cross Sections

    Science.gov (United States)

    Koehler, Paul

    2002-10-01

    The ^22Ne(α,n)^25Mg reaction is the neutron source during the s process in massive and intermediate mass stars as well as a secondary neutron source during the s process in low mass stars. Therefore, an accurate determination of this rate is important for a better understanding of the origin of nuclides heavier than iron as well as for improving s-process models. Also, because the s process produces seed nuclides for a later p process in massive stars, an accurate value for this rate is important for a better understanding of the p process. Because the lowest observed resonance in direct ^22Ne(α,n)^25Mg measurements is considerably above the most important energy range for s-process temperatures, the uncertainty in this rate is dominated by the poorly known properties of states in ^26Mg between this resonance and threshold. Neutron measurements can observe these states with much better sensitivity and determine their parameters much more accurately than direct ^22Ne(α,n)^25Mg measurements. I have analyzed previously reported Mg+n total and ^25Mg(n,γ ) cross sections to obtain a much improved set of resonance parameters for states in ^26Mg in this region, and an improved estimate of the uncertainty in the ^22Ne(α,n)^25Mg reaction rate. This work was supported by the U.S. DOE under contract No. DE-AC05-00OR22725 with UT-Battell, LLC.

  7. Coherent interface structures and intergrain Josephson coupling in dense MgO/Mg{sub 2}Si/MgB{sub 2} nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, Katsuya; Takahashi, Kazuyuki; Uchino, Takashi, E-mail: uchino@kobe-u.ac.jp [Department of Chemistry, Graduate School of Science, Kobe University, Nada, Kobe 657-8501 (Japan); Nagashima, Yukihito [Nippon Sheet Glass Co., Ltd., Konoike, Itami 664-8520 (Japan); Seto, Yusuke [Department of Planetology, Graduate School of Science, Kobe University, Nada, Kobe 657-8501 (Japan); Matsumoto, Megumi; Sakurai, Takahiro [Center for Support to Research and Education Activities, Kobe University, Nada, Kobe 657-8501 (Japan); Ohta, Hitoshi [Molecular Photoscience Research Center, Kobe University, Nada, Kobe 657-8501 (Japan)

    2016-07-07

    Many efforts are under way to control the structure of heterointerfaces in nanostructured composite materials for designing functionality and engineering application. However, the fabrication of high-quality heterointerfaces is challenging because the crystal/crystal interface is usually the most defective part of the nanocomposite materials. In this work, we show that fully dense insulator (MgO)/semiconductor(Mg{sub 2}Si)/superconductor(MgB{sub 2}) nanocomposites with atomically smooth and continuous interfaces, including epitaxial-like MgO/Mg{sub 2}Si interfaces, are obtained by solid phase reaction between metallic magnesium and a borosilicate glass. The resulting nanocomposites exhibit a semiconductor-superconducting transition at 36 K owing to the MgB{sub 2} nanograins surrounded by the MgO/Mg{sub 2}Si matrix. This transition is followed by the intergrain phase-lock transition at ∼24 K due to the construction of Josephson-coupled network, eventually leading to a near-zero resistance state at 17 K. The method not only provides a simple process to fabricate dense nanocomposites with high-quality interfaces, but also enables to investigate the electric and magnetic properties of embedded superconducting nanograins with good intergrain coupling.

  8. Photoluminescence of Mg_2Si films fabricated by magnetron sputtering

    International Nuclear Information System (INIS)

    Liao, Yang-Fang; Xie, Quan; Xiao, Qing-Quan; Chen, Qian; Fan, Meng-Hui; Xie, Jing; Huang, Jin; Zhang, Jin-Min; Ma, Rui; Wang, Shan-Lan; Wu, Hong-Xian; Fang, Di

    2017-01-01

    Highlights: • High quality Mg_2Si films were grown on Si (111) and glass substrates with magnetron sputtering, respectively. • The first observation of Photoluminescence (PL) of Mg_2Si films was reported. • The Mg_2Si PL emission wavelengths are almost independence on temperature in the range of 77–300 K. • The strongest PL emissions may be attributed to interstitial Mg donor level to valence band transitions. • The activation energy of Mg_2Si is determined from the quenching of major luminescence peaks. - Abstract: To understand the photoluminescence mechanisms and optimize the design of Mg_2Si-based light-emitting devices, Mg_2Si films were fabricated on silicon (111) and glass substrates by magnetron sputtering technique, and the influences of different substrates on the photoelectric properties of Mg_2Si films were investigated systematically. The crystal structure, cross-sectional morphology, composition ratios and temperature-dependent photoluminescence (PL) of the Mg_2Si films were examined using X-ray diffraction (XRD), Scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS) and PL measurement system, respectively. XRD results indicate that the Mg_2Si film on Si (111) displays polycrystalline structure, whereas Mg_2Si film on glass substrate is of like-monocrystalline structure.SEM results show that Mg_2Si film on glass substrate is very compact with a typical dense columnar structure, and the film on Si substrate represents slight delamination phenomenon. EDS results suggest that the stoichiometry of Mg and Si is approximately 2:1. Photoluminescence (PL) of Mg_2Si films was observed for the first time. The PL emission wavelengths of Mg_2Si are almost independence on temperature in the range of 77–300 K. The PL intensity decreases gradually with increasing temperature. The PL intensity of Mg_2Si films on glass substrate is much larger than that of Mg_2Si film on Si (111) substrate. The activation energy of 18 meV is

  9. Study of some Mg-based ferrites as humidity sensors

    International Nuclear Information System (INIS)

    Rezlescu, N; Rezlescu, E; Doroftei, C; Popa, P D

    2005-01-01

    The micostructure and humidity sensitivity of MgFe 2 O 4 + CaO, Mg 0.5 Cu 0.5 Fe 1.8 Ga 0.2 O 4 , Mg 0.5 Zn 0.5 Fe 2 O 4 + KCl and MgMn 0.2 Fe 1.8 O 4 ferrites were investigated. We have found that the humidity sensitivity largely depends on composition, crystallite size, surface area and porosity. The best results concerning humidity sensitivity were obtained for MgMn 0.2 Fe 1.8 O 4 ferrite

  10. Inhibitory effect of MgSO4 on calcium overload after radiation-induced brain injuries

    International Nuclear Information System (INIS)

    Tu Yu; Zhou Yuying; Wang Lili

    2005-01-01

    Objective: To explore the neuroprotective effect of magnesium sulfate (MgSO 4 ) on radiation-induced acute brain injuries. Methods: A total of 60 mature Sprague-Dawley rats were randomly divided into 3 groups: blank control group, experimental control group and experimental therapy group. The whole brain of SD rats of experimental control group and experimental therapy group was irradiated to a dose of 20 Gy using 6 MeV electrons. Magnesium sulfate was injected intraperitoneally into the rats of experimental therapy group before and after irradiation for five times. At different time points (24 h, 7 days, 14 days, 30 days after irradiation), the brain tissue was taken. Plasma direct reading spectrography was used to measure the contents of Ca 2+ , Mg 2+ in brain tissue, and the percentage of brain water content was calculated with the wet-dry weight formula. Results: Compared with the blank control group, the percentage of brain water and content of Ca 2+ in brain of the experimental control group increased markedly (P 2+ decreased significantly (P 2+ in brain of the experimental therapy group were significantly lower than those of the experimental control group (P<0.05). Conclusion: Magnesium sulfate used in the early stage after irradiation can inhibit the calcium overload in rat brain , and attenuate brain edema and injuries. (authors)

  11. Effects of Tadalafil 5 mg Dosed Once Daily in Men with Premature Ejaculation.

    Science.gov (United States)

    Ozcan, Levent; Polat, Emre Can; Onen, Efe; Kocaaslan, Ramazan; Otunctemur, Alper; Cekmen, Mustafa; Eraldemir, Ceyla; Ozbek, Emin

    2017-01-01

    In this study, we evaluated the effect of 5 mg tadalafil once daily in men with premature ejaculation (PE). Thirty married men with lifelong PE and 30 healthy men as control group were included in this study. All the patients received 5 mg tadalafil once a day for a month. The international index of erectile function questionnaire and intravaginal ejaculatory latency times (IELTs) and PE profile were recorded before and after treatment. Plasma samples were collected before and after treatment. The mean baseline IELTs was 40.8 ± 8.1 s in the PE group and 196.5 ± 26.2 s in the control group. After treatment in the PE group, the mean IELTs values showed a statistically significant improvement from the baseline values. At the end of 4 weeks, in the PE group, the mean IELT values showed a statistically significant improvement from the baseline values. Baseline serum nitric oxide (NO) levels were 27.3 ± 1.7 in the PE group and in the 31.1 ± 1.4 healthy control groups. After treatment, NO levels were increased from baseline. We consider that 5 mg tadalafil once daily is safety and effective for the treatment of PE. © 2016 S. Karger AG, Basel.

  12. Intrinsic Conductivity in Magnesium-Oxygen Battery Discharge Products: MgO and MgO2

    DEFF Research Database (Denmark)

    Smith, Jeffrey G.; Naruse, Junichi; Hiramatsu, Hidehiko

    2017-01-01

    Nonaqueous magnesium–oxygen (or “Mg-air”) batteries are attractive next generation energy storage devices due to their high theoretical energy densities, projected low cost, and potential for rechargeability. Prior experiments identified magnesium oxide, MgO, and magnesium peroxide, MgO2...

  13. A Computational Investigation of Precipitates in Mg-RE Alloys With Applications To Mg-X Systems

    Science.gov (United States)

    Issa, Ahmed

    Increasing fuel efficiency in transportation vehicles is a major policy goal for both government and auto and aerospace manufacturers. Lightweight structural materials, such as magnesium alloys, hold great promise in enabling such fuel efficiency gains. Understanding the controlling factors in Mg alloy strengthening is crucial for the rational design of structurally strong and inexpensive Mg alloys. In this work, we seek to understand the energetic underpinnings giving rise to a class of remarkably strong Mg alloys: Mg-RE systems. We use first-principles methods to efficiently explore seventeen Mg-RE systems, drawing out broad patterns and distilling our knowledge into simple design rules for Mg alloys. We begin by investigating the controlling factors for the Mg-strengthening prismatic plate precipitates in Mg-RE systems, discovering the critical role of strain in such systems. We then proceed to investigate the surprising role of interfacial energies in determining the course of the Mg-RE precipitation reactions. Using strain and interfacial energies, we construct a phase-field model which accurately depicts the precipitate morphology as a function of time and size in a Mg-Nd system. Finally, we combine our gained insights to implement a computational alloy design scheme on a large portion of the periodic table where we seek Mg-strengthening solutes. Our work advances the understanding of strengthening in Mg alloys and lays the groundwork for full scale computational alloy design.

  14. Tracing subduction zone fluid-rock interactions using trace element and Mg-Sr-Nd isotopes

    Science.gov (United States)

    Wang, Shui-Jiong; Teng, Fang-Zhen; Li, Shu-Guang; Zhang, Li-Fei; Du, Jin-Xue; He, Yong-Sheng; Niu, Yaoling

    2017-10-01

    , whereas high Pb* and 87Sr/86Sr eclogites have mantle-like δ26Mg values, suggesting that the two fluid components have diverse influences on the Mg isotopic systematics of these eclogites. The LILE-rich fluid component, possibly derived from mica-group minerals, contains a considerable amount of isotopically heavy Mg that has shifted the δ26Mg of the eclogites towards higher values. By contrast, the 87Sr/86Sr- and Pb-rich fluid component, most likely released from epidote-group minerals in metasediments, has little Mg so as not to modify the Mg isotopic composition of the eclogites. In addition, the influence of talc-derived fluid might be evident in a very few eclogites that have low Rb/Sr and Ba/Pb but slightly heavier Mg isotopic compositions. These findings represent an important step toward a broad understanding of the Mg isotope geochemistry in subduction zones, and contributing to understanding why island arc basalts have averagely heavier Mg isotopic compositions than the normal mantle.

  15. Improvement in erection hardness and intercourse success with first dose of sildenafil citrate 100 mg

    Directory of Open Access Journals (Sweden)

    Mulhall JP

    2013-11-01

    Full Text Available John P Mulhall,1 Dana L Creanga,2 Vera J Stecher31Urology Service, Department of Surgery, Memorial Sloan Kettering Cancer Center, New York, NY, USA; 2Consultant to Pfizer Inc., New York, NY, USA; 3Medical Affairs, Primary Care Business Unit, Pfizer Inc., New York, NY, USAPurpose: To determine, in men with erectile dysfunction (ED, the extent of improvement in erection hardness and in the rate of successful sexual intercourse (SSI during the final intercourse attempt using sildenafil 50 mg compared with the subsequent initial attempt after a dose increase to 100 mg.Patients and methods: This post hoc analysis used data from two randomized, double-blind, placebo-controlled studies of flexible-dose sildenafil for the treatment of men with ED, who were given sildenafil 50 mg or matching placebo, to be taken as needed before sexual intercourse. After 2 weeks, those with no tolerability concerns were titrated up to 100 mg, forming the subgroup of this analysis. The main outcome measures were event log data, including an Erection Hardness Score (EHS and a question on SSI (“Did your erection last long enough for you to have successful sexual intercourse?”, for each attempt at sexual intercourse, analyzed by study and treatment group (sildenafil or placebo. Statistical comparisons were conducted by using the Fisher's exact test.Results: In both studies, the sildenafil group had a larger proportion of EHS4 (completely hard and fully rigid erections (P < 0.001 and SSI (P < 0.005 compared with the placebo group, both before and after the dose increase. Between the final 50 mg sildenafil dose and the initial 100 mg sildenafil dose, the outcomes improved and significantly so in the larger study.Conclusion: The improved efficacy with sildenafil 100 mg versus 50 mg, which occurs rapidly, suggests that patients should be encouraged to use 100 mg if they are unable to achieve completely hard and fully rigid erections or SSI with the 50 mg dose

  16. Efficacy and safety of tamsulosin hydrochloride 0.2 mg and combination of tamsulosin hydrochloride 0.2 mg plus solifenacin succinate 5 mg after transurethral resection of the prostate: a prospective, randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Shin YS

    2016-09-01

    Full Text Available Yu Seob Shin,1,* Li Tao Zhang,1,* Jae Hyung You,1 In Sung Choi,1 Chen Zhao,2 Jong Kwan Park1 1Department of Urology, Chonbuk National University and Research Institute of Clinical Medicine of Chonbuk National University-Biomedical Research Institute and Medical Device Clinical Trial Center of Chonbuk National University, Jeonju, Republic of Korea; 2Department of Urology, Renji Hospital, Shanghai Jiao Tong University School of Medicine, and Shanghai Institute of Andrology, Shanghai, People’s Republic of China *These authors contributed equally to this work Objective: The objective of this study was to evaluate the safety and efficacy of tamsulosin hydrochloride 0.2 mg (TAM and its combination with solifenacin succinate 5 mg (SOL after transurethral resection of the prostate (TURP.Patients and methods: The patients were randomized into three groups: TURP (group 1, TURP plus TAM (group 2, and TURP plus TAM + SOL (group 3. Patients in group 2 and group 3 received medication for 4 weeks. The primary efficacy end points were the mean change in total International Prostate Symptom Score (IPSS and IPSS subscores. The secondary end points included quality-of-life score, Overactive Bladder Symptom Score, and short-form voiding and storage score of International Continence Society.Results: In total, 37 men (31.8% in group 1, 37 men (31.8% in group 2, and 42 men (36.2% in group 3 completed the study. In total IPSS, no significant improvement was seen from baseline to the end of treatment in groups 2 and 3 compared with group 1. However, in group 2, the decrement in the IPSS storage score was smaller than group 1 (P=0.02, and in group 3, the decrement in the IPSS voiding score was smaller than group 1 (P=0.05. In groups 2 and 3 compared with group 1, improvements in the quality of life score, total score of Overactive Bladder Symptom Score, and short-form voiding score and storage score of International Continence Society were not statistically

  17. Enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers by inhibiting Ta diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xu-Jing; Jiang, Shao-Long; Zhang, Jing-Yan; Liu, Qian-Qian; Liu, Yi-Wei; Zhao, Jian-Cheng [Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China); Wu, Zheng-Long [Analytical and Testing Center, Beijing Normal University, Beijing 100875 (China); Feng, Chun, E-mail: fengchun@ustb.edu.cn [Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China); Li, Ming-Hua [Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China); Yu, Guang-Hua, E-mail: ghyu@mater.ustb.edu.cn [Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China)

    2016-03-01

    Graphical abstract: To reveal the underlying mechanism of Mg influence on the enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers, the X-ray photoelectron spectroscopy analysis have been performed. It is found that a certain amount of Mg interlayer at the CoFeB/MgO interface could prevent the Ta oxidation to some extent due to the oxygen deficit MgO{sub x} (x < 1), and consequently lower the diffusion motivation of Ta from the bottom layer to the CoFeB/MgO interfaces to some extent during the annealing process. The prevention of Ta diffusion realizes the effective hybridization of Fe and O at the CoFeB/MgO interface and maintains interfacial magnetic anisotropy (K{sub CoFeB/MgO}). As a result, the perpendicular magnetic anisotropy at high annealing temperatures was maintained. - Highlights: • High annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers was realized. • X-ray photoelectron spectroscopy analysis has been performed to explore the reasons. • The prevention of Ta diffusion was realized by introducing Mg at the CoFeB/MgO interface. - Abstracts: To reveal the underlying mechanism of Mg influence on the enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers, the X-ray photoelectron spectroscopy analysis has been performed. It is found that a certain amount of Mg interlayer at the CoFeB/MgO interface could prevent the Ta oxidation, and consequently lower the diffusion motivation of Ta from the bottom layer to the CoFeB/MgO interfaces to some extent in the annealing process. The prevention of Ta diffusion realizes the effective hybridization of Fe and O at the CoFeB/MgO interface and maintains interfacial magnetic anisotropy (KCoFeB/MgO). As a result, the perpendicular magnetic anisotropy at high annealing temperatures is maintained.

  18. Cloning the Gravity and Shear Stress Related Genes from MG-63 Cells by Subtracting Hybridization

    Science.gov (United States)

    Zhang, Shu; Dai, Zhong-quan; Wang, Bing; Cao, Xin-sheng; Li, Ying-hui; Sun, Xi-qing

    2008-06-01

    Background The purpose of the present study was to clone the gravity and shear stress related genes from osteoblast-like human osteosarcoma MG-63 cells by subtractive hybridization. Method MG-63 cells were divided into two groups (1G group and simulated microgravity group). After cultured for 60 h in two different gravitational environments, two groups of MG-63 cells were treated with 1.5Pa fluid shear stress (FSS) for 60 min, respectively. The total RNA in cells was isolated. The gravity and shear stress related genes were cloned by subtractive hybridization. Result 200 clones were gained. 30 positive clones were selected using PCR method based on the primers of vector and sequenced. The obtained sequences were analyzed by blast. changes of 17 sequences were confirmed by RT-PCR and these genes are related to cell proliferation, cell differentiation, protein synthesis, signal transduction and apoptosis. 5 unknown genes related to gravity and shear stress were found. Conclusion In this part of our study, our result indicates that simulated microgravity may change the activities of MG-63 cells by inducing the functional alterations of specific genes.

  19. Hydrothermal Synthesis and Characterization of 3R Polytypes of Mg-Al Layered Double Hydroxides

    NARCIS (Netherlands)

    Budhysutanto, W.N.

    2010-01-01

    Layered Double Hydroxides (LDH) is a unique group of clays that have an anionic exchange capability. This research explored the hydrothermal method as an alternative method to synthesize Mg-Al LDH. It is a simple and more environmentally friendly compared to the conventional method of

  20. Enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers by inhibiting Ta diffusion

    International Nuclear Information System (INIS)

    Li, Xu-Jing; Jiang, Shao-Long; Zhang, Jing-Yan; Liu, Qian-Qian; Liu, Yi-Wei; Zhao, Jian-Cheng; Wu, Zheng-Long; Feng, Chun; Li, Ming-Hua; Yu, Guang-Hua

    2016-01-01

    Graphical abstract: To reveal the underlying mechanism of Mg influence on the enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers, the X-ray photoelectron spectroscopy analysis have been performed. It is found that a certain amount of Mg interlayer at the CoFeB/MgO interface could prevent the Ta oxidation to some extent due to the oxygen deficit MgO_x (x < 1), and consequently lower the diffusion motivation of Ta from the bottom layer to the CoFeB/MgO interfaces to some extent during the annealing process. The prevention of Ta diffusion realizes the effective hybridization of Fe and O at the CoFeB/MgO interface and maintains interfacial magnetic anisotropy (K_C_o_F_e_B_/_M_g_O). As a result, the perpendicular magnetic anisotropy at high annealing temperatures was maintained. - Highlights: • High annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers was realized. • X-ray photoelectron spectroscopy analysis has been performed to explore the reasons. • The prevention of Ta diffusion was realized by introducing Mg at the CoFeB/MgO interface. - Abstracts: To reveal the underlying mechanism of Mg influence on the enhanced post-annealing stability of perpendicular Ta/CoFeB/Mg/MgO multilayers, the X-ray photoelectron spectroscopy analysis has been performed. It is found that a certain amount of Mg interlayer at the CoFeB/MgO interface could prevent the Ta oxidation, and consequently lower the diffusion motivation of Ta from the bottom layer to the CoFeB/MgO interfaces to some extent in the annealing process. The prevention of Ta diffusion realizes the effective hybridization of Fe and O at the CoFeB/MgO interface and maintains interfacial magnetic anisotropy (KCoFeB/MgO). As a result, the perpendicular magnetic anisotropy at high annealing temperatures is maintained

  1. Structural and optical properties of ZnMgO nanostructures formed by Mg in-diffused ZnO nanowires

    International Nuclear Information System (INIS)

    Pan, C.-J.; Hsu, H.-C.; Cheng, H.-M.; Wu, C.-Y.; Hsieh, W.-F.

    2007-01-01

    ZnMgO nanostructures with wurtzite phase were prepared by thermal diffusion of Mg into the ZnO nanowires. As ZnO light-emitting devices have been operated by using ZnMgO layers as energy barrier layers to confine the carriers, it is essential to realize the characterization of ZnMgO particularly. In this work, the Mg content in Zn 1 -x Mg x O alloy determined by X-ray diffraction (XRD) and photoluminescence (PL) shows a good coincidence. The variation of lattice constant and the blueshift of near-band-edge emission indicate that Zn 2+ ions are successfully substituted by Mg 2+ ions in the ZnO lattice. In Raman-scattering studies, the change of E 2 (high) phonon line shape in ZnO:Mg nanostructures reveals the microscopic substitutional disorder. In addition to the host phonons of ZnO, two additional bands around 383 and 510 cm -1 are presumably attributed to the Mg-related vibrational modes. - Graphical abstract: We reported the synthesis of the ZnMgO nanostructures prepared by a simple vapor transport method. Magnesium-related anomalous modes are observed by Raman spectra for the first time in ZnMgO system

  2. From $^{27}$Mg to ${33}$Mg transition to the "Island of inversion"

    CERN Document Server

    Yordanov, Deyan

    Since introduced in nuclear physics, the concept of shell structure and magic numbers has governed our understanding of nuclear matter in atomic nuclei close to stability. Nuclear species with a magic number of protons and/or neutrons are known to be more stable and close to spherical in shape. Experimental studies of 30Ne, 31Na and 32Mg, systems with a closed neutron sd shell (N=20), provide evidence for a ground-state deformation in these nuclei. The observed phenomenon is understood as an inversion of the normal spherical ground-state configuration, expected according to the traditional shell model, with deformed states governed by particle-hole excitations over the N=20 shell gap. The properties of nuclei in this Island of inversion are of particular importance for the theoretical modeling of the region. The present doctoral dissertation reports on the first determination of the nuclear ground-state spins and magnetic moments of 31,33Mg, obtained by means of laser spectroscopy in combination with nuclear...

  3. Mg concentration profile and its control in the low temperature grown Mg-doped GaN epilayer

    Science.gov (United States)

    Liu, S. T.; Yang, J.; Zhao, D. G.; Jiang, D. S.; Liang, F.; Chen, P.; Zhu, J. J.; Liu, Z. S.; Liu, W.; Xing, Y.; Zhang, L. Q.; Wang, W. J.; Li, M.; Zhang, Y. T.; Du, G. T.

    2018-01-01

    In this work, the Cp2Mg flux and growth pressure influence to Mg doping concentration and depth profiles is studied. From the SIMS measurement we found that a transition layer exists at the bottom region of the layer in which the Mg doping concentration changes gradually. The thickness of transition layer decreases with the increases of Mg doping concentration. Through analysis, we found that this is caused by Ga memory effect which the Ga atoms stay residual in MOCVD system will react with Mg source, leading a transition layer formation and improve the growth rate. And the Ga memory effect can be well suppressed by increasing Mg doping concentration and growth pressure and thus get a steep Mg doping at the bottom region of p type layer.

  4. Pre-emptive 8 mg dexamethasone and 120 mg etoricoxib for pain prevention after periodontal surgery: A randomised controlled clinical trial

    Directory of Open Access Journals (Sweden)

    Kranti Konuganti

    2015-01-01

    Full Text Available Several anti-inflammatory drugs have been used to reduce pain and discomfort after periodontal surgeries. This study evaluates the efficacy of using etoricoxib and dexamethasone for pain prevention after open-flap debridement surgery. In this study, 60 patients who were undergoing open flap debridment surgery were randomly assigned to receive a single dose preoperative medication 1 hour prior to surgery. The patients were divided into three groups. In Group 1, 20 patients were given placebo drug orally. In Group 2, 20 patients were given 8 mg Dexamethasone orally and in Group 3, 20 patients were given 120 mg Etoricoxib orally. Patients were instructed to complete a pain diary hourly for the first 8 hours after each surgery and three times a day on the following 3 days. The four point verbal rating scale (VRS 4 and Numerical rate scale were used to assess discomfort. Post-operative Assessment of Pain and Discomfort showed that persistent discomfort and pain were found to be more in the placebo group compared to dexamethasone and etoricoxib group. The adoption of a preemptive medication protocol using either etoricoxib or dexamethasone may be considered effective for pain and discomfort prevention after open-flap debridement surgeries.

  5. Industrial production of MgH2 and its application

    International Nuclear Information System (INIS)

    Uesugi, H.; Sugiyama, T.; Nii, H.; Ito, T.; Nakatsugawa, I.

    2011-01-01

    Research highlights: → Tablet and powder Mg were hydrogenated in a 50 kg batch furnace based on thermal equilibrium method. → Compression of Mg tablet improved the hydrogenation yield. → Hydrolysis of MgH 2 using citric acid generated hydrogen under 373 K. → A MgH 2 -hydrogen reactor utilizing hydraulic head pressure was developed. → - Abstract: A process for the industrial production of magnesium hydride (MgH 2 ) based on a thermal equilibrium method and its application to portable hydrogen sources is proposed. Mg powders and tablets compressed with mechanically ground Mg ribbons were successfully hydrogenated in a 50-kg-batch furnace. The resultant MgH 2 showed a hydrogen yield of around 96% with good reproducibility. The compression ratio of Mg tablets was found to be an important factor in the hydrogenation yield. A hydrolysis technique using citric acid as an additive was employed to generate hydrogen under 373 K. Increasing the concentration of citric acid and the temperature accelerated the hydrolysis reactivity. A hydrogen reactor utilizing hydraulic head pressure was developed. It generated hydrogen continuously for 1 h at a flow rate of 100 ml min -1 with hydrolysis of 5 g of tablet-form MgH 2 . The conversion yield was around 70%, regardless of the flow rate.

  6. Corrosion behavior of Mg/graphene composite in aqueous electrolyte

    International Nuclear Information System (INIS)

    Selvam, M.; Saminathan, K.; Siva, P.; Saha, P.; Rajendran, V.

    2016-01-01

    In the present work, the electrochemical corrosion behavior of magnesium (Mg) and thin layer graphene coated Mg (Mg/graphene) are studied in different salt electrolyte such as NaCl, KCl and Na_2SO_4. The phase structure, crystallinity, and surface morphology of the samples are investigated using X-ray diffraction (XRD) analysis, scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM/EDAX), and Raman spectroscopy techniques. The electrochemical corrosion behavior of the Mg and graphene coated Mg are also investigated using Electrochemical Impedance Spectroscopy (EIS) analysis. The tafel plot reveals that the corrosion of Mg drastically drops when coated with thin layer graphene (Mg/graphene) compared to Mg in KCl electrolyte. Moreover, the EIS confirms that Mg/graphene sample shows improve corrosion resistance and lower corrosion rate in KCl solution compare to all other electrolytes studied in the present system. - Highlights: • The corrosion behavior of magnesium alloy (AZ91) was investigated in three different electrolyte solution. • To study the anti-corrosion behavior of graphene coated with magnesium alloy. • To improve the corrosion resistance for magnesium alloy. • Nyquist plots confirms that MgG shows better corrosion resistance and lower corrosion rate in KCl solution.

  7. Corrosion behavior of Mg/graphene composite in aqueous electrolyte

    Energy Technology Data Exchange (ETDEWEB)

    Selvam, M. [Centre for Nano Science and Technology, KS Rangasamy College of Technology, Tiruchengode, 637215, Tamil Nadu (India); Saminathan, K., E-mail: ksaminath@gmail.com [Centre for Nano Science and Technology, KS Rangasamy College of Technology, Tiruchengode, 637215, Tamil Nadu (India); Siva, P. [Centre for Nano Science and Technology, KS Rangasamy College of Technology, Tiruchengode, 637215, Tamil Nadu (India); Saha, P. [Department of Ceramic Engineering, National Institute of Technology, Rourkela, India-769008 (India); Rajendran, V. [Centre for Nano Science and Technology, KS Rangasamy College of Technology, Tiruchengode, 637215, Tamil Nadu (India)

    2016-04-01

    In the present work, the electrochemical corrosion behavior of magnesium (Mg) and thin layer graphene coated Mg (Mg/graphene) are studied in different salt electrolyte such as NaCl, KCl and Na{sub 2}SO{sub 4}. The phase structure, crystallinity, and surface morphology of the samples are investigated using X-ray diffraction (XRD) analysis, scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM/EDAX), and Raman spectroscopy techniques. The electrochemical corrosion behavior of the Mg and graphene coated Mg are also investigated using Electrochemical Impedance Spectroscopy (EIS) analysis. The tafel plot reveals that the corrosion of Mg drastically drops when coated with thin layer graphene (Mg/graphene) compared to Mg in KCl electrolyte. Moreover, the EIS confirms that Mg/graphene sample shows improve corrosion resistance and lower corrosion rate in KCl solution compare to all other electrolytes studied in the present system. - Highlights: • The corrosion behavior of magnesium alloy (AZ91) was investigated in three different electrolyte solution. • To study the anti-corrosion behavior of graphene coated with magnesium alloy. • To improve the corrosion resistance for magnesium alloy. • Nyquist plots confirms that MgG shows better corrosion resistance and lower corrosion rate in KCl solution.

  8. Low-energy radioactive ion beam production of 22Mg

    International Nuclear Information System (INIS)

    Duy, N.N.; Kubono, S.; Yamaguchi, H.; Kahl, D.; Wakabayashi, Y.; Teranishi, T.; Iwasa, N.; Kwon, Y.K.; Khiem, L.H.; Kim, Y.H.; Song, J.S.; Hu, J.; Ayyad, Y.

    2013-01-01

    The 22 Mg nucleus plays an important role in nuclear astrophysics, specially in the 22 Mg(α,p) 25 Al and proton capture 22 Mg(p,γ) 23 Al reactions. It is believed that 22 Mg is a waiting point in the αp-process of nucleosynthesis in novae. We proposed a direct measurement of the 22 Mg+α resonance reaction in inverse kinematics using a radioactive ion (RI) beam. A 22 Mg beam of 3.73 MeV/u was produced at CRIB (Center for Nuclear Study (CNS) low-energy RI Beam) facility of the University of Tokyo located at RIKEN (Japan) in 2011. In this paper we present the results about the production of the 22 Mg beam used for the direct measurement of the scattering reaction 22 Mg(α,α) 22 Mg, and the stellar reaction 22 Mg(α,p) 25 Al in the energy region concerning an astrophysical temperature of T 9 =1–3 GK

  9. The structural, electrical and optical properties of Mg-doped ZnO with different interstitial Mg concentration

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Yonghong, E-mail: hchyh@njust.edu.cn [School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100 (China); Institute of Optoelectronics & Nanomaterials, College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China); Zeng, Haibo [Institute of Optoelectronics & Nanomaterials, College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China); Du, Jifu [School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100 (China); Hu, Ziyu [Beijing Computational Science Research Center, Beijing 100084 (China); Zhang, Shengli [Institute of Optoelectronics & Nanomaterials, College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China)

    2016-10-01

    Through first principle calculations, we studied the structural, electronic and optical properties of ZnO doped by interstitial Mg. With the increase of Mg content (x), the derivations of lattice parameters from the wurtzite ZnO become more and more significant. The Mg-doped ZnO with x below 15.79% is found to be n-type semiconductor. The minimum of energy band gap and light transmittance in high energy region (7.5–25 eV) decrease while the conductivity and refractive index increase with increasing x. Further increasing x up to 20%, the Mg-doped ZnO is found to be direct-band-gap semiconductor with great structural derivation from wurtzite phase. The light transmittance increases while the refractive index decreases with the increase of x due to the change of geometry and electronic structure. So, it’s concluded that the electronic and optical properties of ZnO doped by interstitial Mg may be greatly influenced by Mg content. - Graphical abstract: The minimum of energy gap decreases while the corresponding relative number of electrons into the conduction bands increases when the interstitial Mg content x in Mg-doped ZnO increases (0 ≤ x ≤ 15.79%). - Highlights: • The energy band gap decreases with the increase of interstitial Mg content from 5.88% to 15.79%. • The conductivity increases with the increase of interstitial Mg content from 5.88% to 15.79%. • The Mg{sub x}Zn{sub 1-x}O (interstitial Mg content x= 20%) is found to be a direct-band-gap semiconductor. • The light transmittance decreases with the increase of interstitial Mg content from 5.88% to 15.79%. • The refractive index increases with the increase of interstitial Mg content from 5.88% to 15.79%.

  10. 21 CFR 520.246 - Butorphanol tartrate tablets.

    Science.gov (United States)

    2010-04-01

    ....246 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED...) Conditions of use. The drug is used for the treatment of dogs as follows: (1) Amount. 0.25 milligram of... associated with inflammatory conditions of the upper respiratory tract. (3) Limitations. For oral use in dogs...

  11. Effects of Mg substitution on the structural and magnetic properties of Co0.5Ni0.5-x Mg x Fe2O4 nanoparticle ferrites

    Science.gov (United States)

    R, M. Rosnan; Z, Othaman; R, Hussin; Ali, A. Ati; Alireza, Samavati; Shadab, Dabagh; Samad, Zare

    2016-04-01

    In this study, nanocrystalline Co-Ni-Mg ferrite powders with composition Co0.5Ni0.5-x Mg x Fe2O4 are successfully synthesized by the co-precipitation method. A systematic investigation on the structural, morphological and magnetic properties of un-doped and Mg-doped Co-Ni ferrite nanoparticles is carried out. The prepared samples are characterized using x-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), and vibrating sample magnetometry (VSM). The XRD analyses of the synthesized samples confirm the formation of single-phase cubic spinel structures with crystallite sizes in a range of ˜ 32 nm to ˜ 36 nm. The lattice constant increases with increasing Mg content. FESEM images show that the synthesized samples are homogeneous with a uniformly distributed grain. The results of IR spectroscopy analysis indicate the formation of functional groups of spinel ferrite in the co-precipitation process. By increasing Mg2+ substitution, room temperature magnetic measurement shows that maximum magnetization and coercivity increase from ˜ 57.35 emu/g to ˜ 61.49 emu/g and ˜ 603.26 Oe to ˜ 684.11 Oe (1 Oe = 79.5775 A·m-1), respectively. The higher values of magnetization M s and M r suggest that the optimum composition is Co0.5Ni0.4Mg0.1Fe2O4 that can be applied to high-density recording media and microwave devices. Project supported by the Ibnu Sina Institute for Scientific and Industrial Research, Physics Department of Universiti Teknologi Malaysia and the Ministry of Education Malaysia (Grant Nos. Q.J130000.2526.04H65).

  12. Which finite simple groups are unit groups?

    DEFF Research Database (Denmark)

    Davis, Christopher James; Occhipinti, Tommy

    2014-01-01

    We prove that if G is a finite simple group which is the unit group of a ring, then G is isomorphic to either (a) a cyclic group of order 2; (b) a cyclic group of prime order 2^k −1 for some k; or (c) a projective special linear group PSLn(F2) for some n ≥ 3. Moreover, these groups do all occur a...

  13. Corrosion properties of the Mg alloy coated with polypyrrole films

    International Nuclear Information System (INIS)

    Grubač, Zoran; Rončević, Ivana Škugor; Metikoš-Huković, Mirjana

    2016-01-01

    Highlights: • Electropolymerization of pyrrole on Mg-alloy surface in presence of salicylate. • Salicylate dual role in PPy deposition: passivation and electron transfer mediation. • Redox potential of salicylate corresponds to potential of PPy nucleation. • EIS and polarization corrosion studies of PPy coated Mg-alloy in Hanks’ solution. • Polypyrrole significantly slowdown Mg alloy corrosion in Hanks’ solution. - Abstract: In the present study the reactive surface of Mg alloy was coated with the nontoxic biocompatible polypyrrole (PPy) film synthesized by electrochemical oxidation from an aqueous salicylate solution. Salicylate ions prevent Mg dissolution and act as an electron transfer mediator during the PPy film nucleation, formation and growth on the alloy surface. Kinetics of the pyrrole polymerization as well as corrosion resistance of the PPy coated Mg alloy in the Hanks’ solution were investigated using dc electrochemical methods and electrochemical impedance spectroscopy (EIS). Characterization of the surface film was performed by optical and Fourier transform infrared spectroscopy (FTIR).

  14. Thermoelectric properties and microstructure of Mg3Sb2

    International Nuclear Information System (INIS)

    Condron, Cathie L.; Kauzlarich, Susan M.; Gascoin, Franck; Snyder, G. Jeffrey

    2006-01-01

    Mg 3 Sb 2 has been prepared by direct reaction of the elements. Powder X-ray diffraction, thermal gravimetric, differential scanning calorimetery, and microprobe data were obtained on hot pressed samples. Single phase samples of Mg 3 Sb 2 were prepared and found to contain oxygen at the grain boundaries and to lose Mg and oxidize at temperatures above 900 K. Thermoelectric properties were characterized by Seebeck, electrical resistivity, and thermal conductivity measurements from 300 to 1023 K, and the maximum zT was found to be 0.21 at ∼875 K. - Graphical abstract: Dimensionless figure of merit for Mg 3 Sb 2 hot pressed and sintered at 873 K. The inset illustrates the crystal structure of Mg 3 Sb 2 along the [100] direction (white=Mg, black=Sb)

  15. A high resolution atlas of Mg II profiles

    Science.gov (United States)

    Ewald, R.; Nichols-Bohlin, Joy Y.; Kondo, Yoji

    1990-01-01

    An atlas of high dispersion Mg II profiles for standard stars of spectral types B0 through G9 is presented. The atlas contains plots of the Mg II profiles for approximately 65 stars and associated equivalent width measurements for both absorption and emission components, and the subordinate lines. The atlas is used to investigate systematic behavior of the Mg II profiles and correlation of the behavior with spectral classification.

  16. MgO nanoparticles as antibacterial agent: preparation and activity

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Zhen-Xing, E-mail: tangzhenxing@126.com [Department of Food Science, Anqing, Vocational and Technical College, Anqing, Anhui (China); Lv, Bin-Feng [Date Palm Research Center, King Faisal University, (Saudi Arabia)

    2014-07-15

    Bacterial pollution is a great risk for human health. Nanotechnology offers a way to develop new inorganic antibacterial agents. Nano-inorganic metal oxide has a potential to reduce bacterial contamination. MgO is an important inorganic oxide and has been widely used in many fields. Many studies have shown that MgO nanoparticles have good antibacterial activity. Therefore, in this paper, the main synthesis methods, antibacterial activity and antibacterial mechanisms of MgO nanoparticles are reviewed. (author)

  17. MgO nanoparticles as antibacterial agent: preparation and activity

    International Nuclear Information System (INIS)

    Tang, Zhen-Xing; Lv, Bin-Feng

    2014-01-01

    Bacterial pollution is a great risk for human health. Nanotechnology offers a way to develop new inorganic antibacterial agents. Nano-inorganic metal oxide has a potential to reduce bacterial contamination. MgO is an important inorganic oxide and has been widely used in many fields. Many studies have shown that MgO nanoparticles have good antibacterial activity. Therefore, in this paper, the main synthesis methods, antibacterial activity and antibacterial mechanisms of MgO nanoparticles are reviewed. (author)

  18. Effect of amorphous Mg50Ni50 on hydriding and dehydriding behavior of Mg2Ni alloy

    International Nuclear Information System (INIS)

    Guzman, D.; Ordonez, S.; Fernandez, J.F.; Sanchez, C.; Serafini, D.; Rojas, P.A.; Aguilar, C.; Tapia, P.

    2011-01-01

    Composite Mg 2 Ni (25 wt.%) amorphous Mg 50 Ni 50 was prepared by mechanical milling starting with nanocrystalline Mg 2 Ni and amorphous Mg 50 Ni 50 powders, by using a SPEX 8000 D mill. The morphological and microstructural characterization of the powders was performed via scanning electron microscopy and X-ray diffraction. The hydriding characterization of the composite was performed via a solid gas reaction method in a Sievert's-type apparatus at 363 K under an initial hydrogen pressure of 2 MPa. The dehydriding behavior was studied by differential thermogravimetry. On the basis of the results, it is possible to conclude that amorphous Mg 50 Ni 50 improved the hydriding and dehydriding kinetics of Mg 2 Ni alloy upon cycling. A tentative rationalization of experimental observations is proposed. - Research Highlights: → First study of the hydriding behavior of composite Mg 2 Ni (25 wt.%) amorphous Mg 50 Ni 50 . → Microstructural characterization of composite material using XRD and SEM was obtained. → An improved effect of Mg 50 Ni 50 on the Mg 2 Ni hydriding behavior was verified. → The apparent activation energy for the hydrogen desorption of composite was obtained.

  19. Lattice stability and formation energies of intrinsic defects in Mg2Si and Mg2Ge via first principles simulations

    International Nuclear Information System (INIS)

    Jund, Philippe; Viennois, Romain; Tédenac, Jean-Claude; Colinet, Catherine; Hug, Gilles; Fèvre, Mathieu

    2013-01-01

    We report an ab initio study of the semiconducting Mg 2 X (with X = Si, Ge) compounds and in particular we analyze the formation energies of the different point defects with the aim of understanding the intrinsic doping mechanisms. We find that the formation energy of Mg 2 Ge is 50% larger than that of Mg 2 Si, in agreement with the experimental tendency. From a study of the stability and the electronic properties of the most stable defects, taking into account the growth conditions, we show that the main cause of the n doping in these materials comes from interstitial magnesium defects. Conversely, since other defects acting like acceptors such as Mg vacancies or multivacancies are more stable in Mg 2 Ge than in Mg 2 Si, this explains why Mg 2 Ge can be of n or p type, in contrast to Mg 2 Si. The finding that the most stable defects are different in Mg 2 Si and Mg 2 Ge and depend on the growth conditions is important and must be taken into account in the search for the optimal doping to improve the thermoelectric properties of these materials.

  20. Hydrodechlorination of Tetrachloromethane over Palladium Catalysts Supported on Mixed MgF2-MgO Carriers

    Directory of Open Access Journals (Sweden)

    Magdalena Bonarowska

    2016-11-01

    Full Text Available Pd/MgO, Pd/MgF2 and Pd/MgO-MgF2 catalysts were investigated in the reaction of CCl4 hydrodechlorination. All the catalysts deactivated in time on stream, but the degree of deactivation varied from catalyst to catalyst. The MgF2-supported palladium with relatively large metal particles appeared the best catalyst, characterized by good activity and selectivity to C2-C5 hydrocarbons. Investigation of post-reaction catalyst samples allowed to find several details associated with the working state of hydrodechlorination catalysts. The role of support acidity was quite complex. On the one hand, a definite, although not very high Lewis acidity of MgF2 is beneficial for shaping high activity of palladium catalysts. The MgO-MgF2 support characterized by stronger Lewis acidity than MgF2 contributes to very good catalytic activity for a relatively long reaction period (~5 h but subsequent neutralization of stronger acid centers (by coking eliminates them from the catalyst. On the other hand, the role of acidity evolution, which takes place when basic supports (like MgO are chlorided during HdCl reactions, is difficult to assess because different events associated with distribution of chlorided support species, leading to partial or even full blocking of the surface of palladium, which plays the role of active component in HdCl reactions.

  1. Enhanced voltage-controlled magnetic anisotropy in magnetic tunnel junctions with an MgO/PZT/MgO tunnel barrier

    Science.gov (United States)

    Chien, Diana; Li, Xiang; Wong, Kin; Zurbuchen, Mark A.; Robbennolt, Shauna; Yu, Guoqiang; Tolbert, Sarah; Kioussis, Nicholas; Khalili Amiri, Pedram; Wang, Kang L.; Chang, Jane P.

    2016-03-01

    Compared with current-controlled magnetization switching in a perpendicular magnetic tunnel junction (MTJ), electric field- or voltage-induced magnetization switching reduces the writing energy of the memory cell, which also results in increased memory density. In this work, an ultra-thin PZT film with high dielectric constant was integrated into the tunneling oxide layer to enhance the voltage-controlled magnetic anisotropy (VCMA) effect. The growth of MTJ stacks with an MgO/PZT/MgO tunnel barrier was performed using a combination of sputtering and atomic layer deposition techniques. The fabricated MTJs with the MgO/PZT/MgO barrier demonstrate a VCMA coefficient, which is ˜40% higher (19.8 ± 1.3 fJ/V m) than the control sample MTJs with an MgO barrier (14.3 ± 2.7 fJ/V m). The MTJs with the MgO/PZT/MgO barrier also possess a sizeable tunneling magnetoresistance (TMR) of more than 50% at room temperature, comparable to the control MTJs with an MgO barrier. The TMR and enhanced VCMA effect demonstrated simultaneously in this work make the MgO/PZT/MgO barrier-based MTJs potential candidates for future voltage-controlled, ultralow-power, and high-density magnetic random access memory devices.

  2. Comparing the Electrochemical Performance of LiFePO4/C Modified by Mg Doping and MgO Coating

    Directory of Open Access Journals (Sweden)

    Jianjun Song

    2013-01-01

    Full Text Available Supervalent cation doping and metal oxide coating are the most efficacious and popular methods to optimize the property of LiFePO4 lithium battery material. Mg-doped and MgO-coated LiFePO4/C were synthesized to analyze their individual influence on the electrochemical performance of active material. The specific capacity and rate capability of LiFePO4/C are improved by both MgO coating and Mg doping, especially the Mg-doped sample—Li0.985Mg0.015FePO4/C, whose discharge capacity is up to 163 mAh g−1, 145.5 mAh g−1, 128.3 mAh g−1, and 103.7 mAh g−1 at 1 C, 2 C, 5 C, and 10 C, respectively. The cyclic life of electrode is obviously increased by MgO surface modification, and the discharge capacity retention rate of sample LiFePO4/C-MgO2.5 is up to 104.2% after 100 cycles. Comparing samples modified by these two methods, Mg doping is more prominent on prompting the capacity and rate capability of LiFePO4, while MgO coating is superior in terms of improving cyclic performance.

  3. Effect of sterilization process on surface characteristics and biocompatibility of pure Mg and MgCa alloys

    International Nuclear Information System (INIS)

    Liu, X.L.; Zhou, W.R.; Wu, Y.H.; Cheng, Y.; Zheng, Y.F.

    2013-01-01

    The aim of this work was to investigate the effect of various sterilization methods on surface characteristics and biocompatibility of MgCa alloy, with pure Mg as a comparison, including steam autoclave sterilization (SA), ethylene oxide steam sterilization (EO), glutaraldehyde sterilization (GD), dry heat sterilization (DH) and Co60 γ ray radiation sterilization (R) technologies. The surface characterizations were performed by environmental scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, grazing incidence X-ray diffraction, water contact angle and surface free energy measurement, whereas the cytotoxicity and hemocompatibility were evaluated by cellular adhesive experiment, platelet adhesion and hemolysis test. The results showed that the five sterilization processes caused more changes on the surface of MgCa alloy than that on the surface of pure Mg. The GD sterilization caused the most obvious changes on the surface of the pure Mg, and the SA sterilization made the largest alteration on the MgCa alloy surface. The GD and DH sterilization processes could cause increases on surface free energy for both pure Mg and MgCa alloys, while the other three sterilization processes reduced the surface free energy. The DH and GD sterilization processes caused the least alteration on the cell adhesion on pure Mg surface, whereas the EO sterilization performed the greatest impact on the cell adhesion on the Mg–Ca alloy surface. The hemolysis percentage of pure Mg and MgCa alloys were reduced by SA sterilization, meanwhile the other four sterilization processes increased their hemolysis percentages significantly, especially for the EO sterilization. - Highlights: • The effect of sterilization on surface chemistry and biocompatibility was studied. • Sterilization caused more surface changes on MgCa alloy than pure Mg. • Co60 γ ray radiation is the most appropriate sterilization process

  4. Mg and Mg alloys: how comparable are in vitro and in vivo corrosion rates? A review.

    Science.gov (United States)

    Martinez Sanchez, Adela Helvia; Luthringer, Bérengère J C; Feyerabend, Frank; Willumeit, Regine

    2015-02-01

    Due to their biodegradability, magnesium and magnesium-based alloys could represent the third generation of biomaterials. However, their mechanical properties and time of degradation have to match the needs of applications. Several approaches, such as choice of alloying elements or tailored microstructure, are employed to tailor corrosion behaviour. Due to the high electrochemical activity of Mg, numerous environmental factors (e.g. temperature and surrounding ion composition) influence its corrosion behaviour, making it unpredictable. Nevertheless, the need of reliable in vitro model(s) to predict in vivo implant degradation is increasing. In an attempt to find a correlation between in vitro and vivo corrosion rates, this review presents a systematic literature survey, as well as an attempt to correlate the different results. Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  5. Mg-doped hydroxyapatite nanoplates for biomedical applications: A surfactant assisted microwave synthesis and spectroscopic investigations

    International Nuclear Information System (INIS)

    Mishra, Vijay Kumar; Bhattacharjee, Birendra Nath; Parkash, Om; Kumar, Devendra; Rai, Shyam Bahadur

    2014-01-01

    Highlights: • Microwave irradiation technique: employed for the synthesis of Mg-HAp nanoplates. • Surfactant (EDTA) assisted synthesis of Mg-HAp. • FT-IR and Raman analysis of functional groups of Mg-HAp. - Abstract: Nanoplates of Mg doped hydroxyapatite (Mg-HAp) were derived successfully and rapidly via microwave irradiation technique. Hydroxyapatite (HAp) is the hard tissues and main inorganic component in mammals. Different nanostructures of HAp exist in different parts of human bone but nanorods are very common due to its intrinsic nature to grow in rode-like structure under physiological as well as under applied ambient conditions in laboratory. On the addition of Mg at very low level (0.06 mol%) in pure HAp results the formation of 2-D plate-like nanostructures rather than rod-like which is the matter of interest. In this attempt our efforts have been focused on the study of effect of Mg incorporation on structural and spectroscopic properties of HAp prepared via microwave irradiation technique. This technique is preferred due to several advantages viz. very fast as well as homogeneous heating, time/energy saving and eco-friendliness. The calcium nitrate tetrahydrate (Ca(NO 3 ) 2 ⋅4H 2 O)) as a source of calcium, magnesium nitrate hexahydrate (Mg(NO 3 ) 2 ⋅6H 2 O) as a source of magnesium, disodium hydrogen phosphate dihydrate (NaH 2 PO 4 ⋅2H 2 O) as a source of phosphorous and sodium ethylene diamine tetra acetate (NaEDTA) as a surfactant were used as starting reagents. Sodium hydroxide (NaOH) pellets were employed to adjust the pH value of final solution. The solution of fixed pH value was kept into the microwave oven generating waves of frequency 2.45 GHz (water absorption frequency) and power 750 W for 8 min. The precipitate thus obtained was washed, centrifuged and then dried at 100 °C for 2 h. Dried powder was then calcined at 700 °C for 2 h. The bright white powder thus obtained was characterized structurally using X-ray diffraction and

  6. Mg-doped hydroxyapatite nanoplates for biomedical applications: A surfactant assisted microwave synthesis and spectroscopic investigations

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, Vijay Kumar [Department of Physics, Faculty of Science, Banaras Hindu University, Varanasi 221005 (India); Bhattacharjee, Birendra Nath; Parkash, Om [Department of Ceramic Engineering, Indian Institute of Technology, Banaras Hindu University, Varanasi 221005 (India); Kumar, Devendra, E-mail: devendra.cer@iitbhu.ac.in [Department of Ceramic Engineering, Indian Institute of Technology, Banaras Hindu University, Varanasi 221005 (India); Rai, Shyam Bahadur, E-mail: sbrai49@yahoo.co.in [Department of Physics, Faculty of Science, Banaras Hindu University, Varanasi 221005 (India)

    2014-11-25

    Highlights: • Microwave irradiation technique: employed for the synthesis of Mg-HAp nanoplates. • Surfactant (EDTA) assisted synthesis of Mg-HAp. • FT-IR and Raman analysis of functional groups of Mg-HAp. - Abstract: Nanoplates of Mg doped hydroxyapatite (Mg-HAp) were derived successfully and rapidly via microwave irradiation technique. Hydroxyapatite (HAp) is the hard tissues and main inorganic component in mammals. Different nanostructures of HAp exist in different parts of human bone but nanorods are very common due to its intrinsic nature to grow in rode-like structure under physiological as well as under applied ambient conditions in laboratory. On the addition of Mg at very low level (0.06 mol%) in pure HAp results the formation of 2-D plate-like nanostructures rather than rod-like which is the matter of interest. In this attempt our efforts have been focused on the study of effect of Mg incorporation on structural and spectroscopic properties of HAp prepared via microwave irradiation technique. This technique is preferred due to several advantages viz. very fast as well as homogeneous heating, time/energy saving and eco-friendliness. The calcium nitrate tetrahydrate (Ca(NO{sub 3}){sub 2}⋅4H{sub 2}O)) as a source of calcium, magnesium nitrate hexahydrate (Mg(NO{sub 3}){sub 2}⋅6H{sub 2}O) as a source of magnesium, disodium hydrogen phosphate dihydrate (NaH{sub 2}PO{sub 4}⋅2H{sub 2}O) as a source of phosphorous and sodium ethylene diamine tetra acetate (NaEDTA) as a surfactant were used as starting reagents. Sodium hydroxide (NaOH) pellets were employed to adjust the pH value of final solution. The solution of fixed pH value was kept into the microwave oven generating waves of frequency 2.45 GHz (water absorption frequency) and power 750 W for 8 min. The precipitate thus obtained was washed, centrifuged and then dried at 100 °C for 2 h. Dried powder was then calcined at 700 °C for 2 h. The bright white powder thus obtained was characterized

  7. Defect structure of ultrafine MgB2 nanoparticles

    International Nuclear Information System (INIS)

    Bateni, Ali; Somer, Mehmet; Repp, Sergej; Erdem, Emre; Thomann, Ralf; Acar, Selçuk

    2014-01-01

    Defect structure of MgB 2 bulk and ultrafine particles, synthesized by solid state reaction route, have been investigated mainly by the aid of X-band electron paramagnetic resonance spectrometer. Two different amorphous Boron (B) precursors were used for the synthesis of MgB 2 , namely, boron 95 (purity 95%–97%, <1.5 μm) and nanoboron (purity >98.5%, <250 nm), which revealed bulk and nanosized MgB 2 , respectively. Scanning and transmission electron microscopy analysis demonstrate uniform and ultrafine morphology for nanosized MgB 2 in comparison with bulk MgB 2 . Powder X-ray diffraction data show that the concentration of the by-product MgO is significantly reduced when nanoboron is employed as precursor. It is observed that a significant average particle size reduction for MgB 2 can be achieved only by using B particles of micron or nano size. The origin and the role of defect centers were also investigated and the results proved that at nanoscale MgB 2 material contains Mg vacancies. Such vacancies influence the connectivity and the conductivity properties which are crucial for the superconductivity applications

  8. Efficacy and tolerability of tamsulosin 0.4 mg in Asian patients with lower urinary tract symptoms secondary to benign prostatic hyperplasia refractory to tamsulosin 0.2 mg: a randomized placebo controlled trial.

    Science.gov (United States)

    Kim, Jung Jun; Han, Deok Hyun; Sung, Hyun Hwan; Choo, Seol Ho; Lee, Sung Won

    2014-07-01

    To evaluate the efficacy and safety of tamsulosin dose increase to 0.4 mg daily in Asian patients with lower urinary tract symptoms secondary to benign prostatic hyperplasia refractory to tamsulosin 0.2 mg treatment. We carried out a 12-week, single-center, randomized, placebo-controlled trial in 220 patients. Patients treated with 0.2 mg tamsulosin daily without other lower urinary tract symptoms secondary to benign prostatic hyperplasia medication for more than 3 months and refractory to this treatment were enrolled. We defined "refractory" as an International Prostate Symptom Score of 13 or greater and a maximum flow rate of 15 or under despite medication. Patients with a surgical history related to lower urinary tract symptoms secondary to benign prostatic hyperplasia or a postvoid residual of 150 mL or greater were excluded. Eligible patients were randomly assigned to the 0.4 mg group (two tablets of 0.2 mg tamsulosin once daily) or the 0.2 mg group (one tablet of 0.2 mg tamsulosin and one tablet of placebo once daily). International Prostate Symptom Score, maximum flow rate, blood pressure, heart rate, and adverse events were compared between the two groups at 4 weeks and 12 weeks. A total of 220 patients were enrolled and analyzed. There were no differences in baseline characteristics between the two groups. After 12 weeks of medication, the International Prostate Symptom Score was not different between the two groups. However, the improvement in maximum flow rate was greater in the 0.4 mg group than the 0.2 mg group (3.0 ± 0.48 mL/s vs -0.25 ± 0.30 mL/s, P Tamsulosin 0.4 mg appears to be a safe treatment regimen for treating lower urinary tract symptoms secondary to benign prostatic hyperplasia in Asian patients who do not respond to 0.2 mg treatment. Increasing the dose of tamsulosin results in a significant improvement in maximum flow rate without any increase in cardiovascular complications. © 2014 The

  9. Randomized clinical trial of dexketoprofen/tramadol 25 mg/75 mg in moderate-to-severe pain after total hip arthroplasty.

    Science.gov (United States)

    McQuay, H J; Moore, R A; Berta, A; Gainutdinovs, O; Fülesdi, B; Porvaneckas, N; Petronis, S; Mitkovic, M; Bucsi, L; Samson, L; Zegunis, V; Ankin, M L; Bertolotti, M; Pizà-Vallespir, B; Cuadripani, S; Contini, M P; Nizzardo, A

    2016-02-01

    The aim was to evaluate the analgesic efficacy and safety of the dexketoprofen/tramadol 25 mg/75 mg fixed-dose combination vs dexketoprofen (25 mg) and tramadol (100 mg) in moderate-to-severe acute pain after total hip arthroplasty. This was a randomized, double-blind, parallel-group study in patients experiencing pain of at least moderate intensity on the day after surgery, compared with placebo at first administration to validate the pain model. The study drug was administered orally every 8 h throughout a 5 day period. Rescue medication, metamizole 500 mg, was available during the treatment period. The evaluation of efficacy was based on patient assessments of pain intensity and pain relief. The primary end point was the mean sum of the pain intensity difference values throughout the first 8 h (SPID8). Overall, 641 patients, mean age 62 (range 29-80) yr, were analysed; mean (sd) values of SPID8 were 247 (157) for dexketoprofen/tramadol, 209 (155) for dexketoprofen, 205 (146) for tramadol, and 151 (159) for placebo. The primary analysis confirmed the superiority of the combination over dexketoprofen 25 mg (P=0.019; 95% confidence interval 6.4-73) and tramadol 100 mg (P=0.012; 95% confidence interval 9.5-76). The single components were superior to placebo (P<0.05), confirming model sensitivity. Most secondary analyses supported the superiority of the combination. The incidence of adverse drug reactions was low and similar among active treatment groups. The efficacy results confirmed the superiority of dexketoprofen/tramadol over its single components, even at higher doses (tramadol), with a safety profile fully in line with that previously known for these agents in monotherapy. EudraCT 2012-004548-31 (https://www.clinicaltrialsregister.eu/ctr-search/search?query=eudract_number:2012-004548-31);ClinicalTrials.gov NCT01902134 (https://www.clinicaltrials.gov/ct2/show/NCT01902134?term=NCT01902134&rank=1). © The Author 2016. Published by Oxford University Press on

  10. Group Cohesion in Experiential Growth Groups

    Science.gov (United States)

    Steen, Sam; Vasserman-Stokes, Elaina; Vannatta, Rachel

    2014-01-01

    This article explores the effect of web-based journaling on changes in group cohesion within experiential growth groups. Master's students were divided into 2 groups. Both used a web-based platform to journal after each session; however, only 1 of the groups was able to read each other's journals. Quantitative data collected before and…

  11. Separation of reaction mechanisms at low energy. Study of the reactions: 27Al(d,p) 28Al, 24Mg(d,p) 25Mg, and 24Mg(d, α) 22Na

    International Nuclear Information System (INIS)

    Mermaz, M.

    1966-06-01

    The two sets of angular distributions of (d,p) reactions on Al and Mg, measured between 2 and 6 MeV, have given the possibility to test, in analysing the statistical fluctuations of cross-section, the validity of the separation of their mean values in two parts, one 'direct', another given by the statistical mechanism. With the same method of analysis we have studied excitation functions for several alpha groups of the reaction 24 Mg(d, α) 22 Na and given an evidence for an intermediate structure for the alpha channel leading to the 3. excited state of 22 Na. The angular distribution of the wide resonance at 15.9 MeV in 26 Al has been obtained. (author) [fr

  12. Theoretical study on the gas adsorption capacity and selectivity of CPM-200-In/Mg and CPM-200-In/Mg-X (-X = -NH2, -OH, -N, -F).

    Science.gov (United States)

    Liu, Xiao-le; Chen, Guang-Hui; Wang, Xiu-Jun; Li, Peng; Song, Yi-Bing; Li, Rui-Yan

    2017-11-15

    The adsorption capacities of a heterometallic metal-organic framework (CPM-200-In/Mg) to VOCs (HCHO, C 2 H 4 , CH 4 , C 2 H 2 , C 3 H 8 , C 2 H 6 , C 2 H 3 Cl, C 2 H 2 Cl 2 , CH 2 Cl 2 and CHCl 3 ) and some inorganic gas molecules (HCN, SO 2 , NO, CO 2 , CO, H 2 S and NH 3 ), as well as its selectivity in ternary mixture systems of natural gas and post-combustion flue gas are theoretically explored at the grand canonical Monte Carlo (GCMC) and density functional theory (DFT) levels. It is shown that CPM-200-In/Mg is suitable for the adsorption of VOCs, particularly for HCHO (up to 0.39 g g -1 at 298 K and 1 bar), and the adsorption capacities of some inorganic gas molecules such as SO 2 , H 2 S and CO 2 match well with the sequence of their polarizability (SO 2 > H 2 S > CO 2 ). The large adsorption capacities of HCN and HCHO in the framework result from the strong interaction between adsorbates and metal centers, based on analyzing the radial distribution functions (RDF). Comparing C 2 H 4 and CH 4 molecules interacting with CPM-200-In/Mg by VDW interaction, we speculate that the high adsorption capacities of their chlorine derivatives in the framework could be due to the existence of halogen bonding or strong electrostatic and VDW interactions. It is found that the basic groups, including -NH 2 , -N and -OH, can effectively improve both the adsorption capacities and selectivity of CPM-200-In/Mg for harmful gases. Note that the adsorption capacity of CPM-200-In/Mg-NH 2 (site 2) (245 cm 3 g -1 ) for CO 2 exceeded that of MOF-74-Mg (228 cm 3 g -1 ) at 273 K and 1 bar and that for HCHO can reach 0.41 g g -1 , which is almost twice that of 438-MOF and nearly 45 times of that in active carbon. Moreover, for natural gas mixtures, the decarburization and desulfurization abilities of CPM-200-In/Mg-NH 2 (site 2) have exceeded those of the MOF-74 series, while for post-combustion flue gas mixtures, the desulfurization ability of CPM-200-In/Mg-NH 2 (site 2) is still

  13. Mechanism of magnetoresistance ratio enhancement in MgO/NiFe/MgO heterostructure by rapid thermal annealing

    Science.gov (United States)

    Zhao, Chong-Jun; Liu, Yang; Zhang, Jing-Yan; Sun, Li; Ding, Lei; Zhang, Peng; Wang, Bao-Yi; Cao, Xing-Zhong; Yu, Guang-Hua

    2012-08-01

    To reveal thermal effects on the film quality/microstructure evolution and the resulted magnetoresistance (MR) ratio in MgO/NiFe/MgO heterostructures, positron annihilation spectroscopy studies have been performed. It is found that the ionic interstitials in the MgO layers recombine with the nearby vacancies at lower annealing temperatures (200-300 °C) and lead to a slow increase in sample MR. Meanwhile, vacancy defects agglomeration/removal and ordering acceleration in MgO will occur at higher annealing temperatures (450-550 °C) and the improved MgO and MgO/NiFe interfaces microstructure are responsible for the observed significant MR enhancement.

  14. Antianginal efficacy of the combination of felodipine-metoprolol 10/100 mg compared with each drug alone in patients with stable effort-induced angina pectoris

    DEFF Research Database (Denmark)

    Emanuelsson, H; Egstrup, K; Nikus, K

    1999-01-01

    OBJECTIVE: The primary objective of this randomized, double-blind, parallel group trial was to compare the antianginal and antiischemic efficacy of a combination tablet of felodipine-metoprolol 10/100 mg once daily with both drugs given separately once daily in patients with stable effort......-daily treatment with either felodipine-metoprolol 10/100 mg, felodipine 10 mg, or metoprolol 100 mg. The duration of active double-blind treatment was 4 weeks. There were 3 primary efficacy variables in the study; time until end of exercise, time until onset of chest discomfort, and time until 1-mm ST depression...... during a standardized exercise test. RESULTS: The number of patients randomized was 397. There was a statistically significant improvement in time until end of exercise with felodipine-metoprolol 10/100 mg compared with metoprolol 100 mg (P =.04) and felodipine 10 mg compared with metoprolol 100 mg ( P...

  15. Group Work Publication-1991.

    Science.gov (United States)

    Zimpfer, David G.

    1992-01-01

    Lists 21 new publications in group work, of which 9 are reviewed. Those discussed include publications on group counseling and psychotherapy, structured groups, support groups, psychodrama, and social group work. (Author/NB)

  16. Quantum isometry groups

    Indian Academy of Sciences (India)

    Jyotishman Bhowmick

    2015-11-07

    Nov 7, 2015 ... Classical. Quantum. Background. Compact Hausdorff space. Unital C∗ algebra. Gelfand-Naimark. Compact Group. Compact Quantum Group. Woronowicz. Group Action. Coaction. Woronowicz. Riemannian manifold. Spectral triple. Connes. Isometry group. Quantum Isometry Group. To be discussed.

  17. The in vitro biocompatibility and macrophage phagocytosis of Mg17Al12 phase in Mg-Al-Zn alloys.

    Science.gov (United States)

    Liu, Chen; He, Peng; Wan, Peng; Li, Mei; Wang, Kehong; Tan, Lili; Zhang, Yu; Yang, Ke

    2015-07-01

    Mg alloys are gaining interest for applications as biodegradable medical implant, including Mg-Al-Zn series alloys with good combination of mechanical properties and reasonable corrosion resistance. However, whether the existence of second phase particles in the alloys exerts influence on the biocompatibility is still not clear. A deeper understanding of how the particles regulate specific biological responses is becoming a crucial requirement for their subsequent biomedical application. In this work, the in vitro biocompatibility of Mg17Al12 as a common second phase in biodegradable Mg-Al-Zn alloys was investigated via hemolysis, cytotoxicity, cell proliferation, and cell adhesion tests. Moreover, osteogenic differentiation was evaluated by the extracellular matrix mineralization assay. The Mg17Al12 particles were also prepared to simulate the real situation of second phase in the in vivo environment in order to estimate the cellular response in macrophages to the Mg17Al12 particles. The experimental results indicated that no hemolysis was found and an excellent cytocompatibility was also proved for the Mg17Al12 second phase when co-cultured with L929 cells, MC3T3-E1 cells and BMSCs. Macrophage phagocytosis co-culture test revealed that Mg17Al12 particles exerted no harmful effect on RAW264.7 macrophages and could be phagocytized by the RAW264.7 cells. Furthermore, the possible inflammatory reaction and metabolic way for Mg17Al12 phase were also discussed in detail. © 2014 Wiley Periodicals, Inc.

  18. Conformational dynamics of ATP/Mg:ATP in motor proteins via data mining and molecular simulation

    Science.gov (United States)

    Bojovschi, A.; Liu, Ming S.; Sadus, Richard J.

    2012-08-01

    The conformational diversity of ATP/Mg:ATP in motor proteins was investigated using molecular dynamics and data mining. Adenosine triphosphate (ATP) conformations were found to be constrained mostly by inter cavity motifs in the motor proteins. It is demonstrated that ATP favors extended conformations in the tight pockets of motor proteins such as F1-ATPase and actin whereas compact structures are favored in motor proteins such as RNA polymerase and DNA helicase. The incorporation of Mg2+ leads to increased flexibility of ATP molecules. The differences in the conformational dynamics of ATP/Mg:ATP in various motor proteins was quantified by the radius of gyration. The relationship between the simulation results and those obtained by data mining of motor proteins available in the protein data bank is analyzed. The data mining analysis of motor proteins supports the conformational diversity of the phosphate group of ATP obtained computationally.

  19. A Negative Thermal Expansion Material of ZrMgMo3O12

    International Nuclear Information System (INIS)

    Song Wen-Bo; Liang Er-Jun; Liu Xian-Sheng; Li Zhi-Yuan; Yuan Bao-He; Wang Jun-Qiao

    2013-01-01

    A material with the formula ZrMgMo 3 O 12 having negative thermal expansion is presented and characterized. It is shown that ZrMgMo 3 O 12 crystallizes in an orthorhombic symmetry with space group Pnma(62) or Pna2 1 (33) and exhibits negative thermal expansion in a large temperature range (α l = −3.8 × 10 −6 K −1 from 300K to 1000K by x-ray diffraction and α l = −3.73 × 10 −6 K −1 from 295K to 775K by dilatometer). ZrMgMo 3 O 12 remains the orthorhombic structure without phase transition or decomposition at least from 123K to 1200K and is not hygroscopic. These properties make it an excellent material with negative thermal expansion for a variety of applications

  20. Synthesis, crystal structure and optical properties of BiMgVO 5

    Science.gov (United States)

    Benmokhtar, S.; El Jazouli, A.; Chaminade, J. P.; Gravereau, P.; Guillen, F.; de Waal, D.

    2004-11-01

    The new vanadate BiMgVO 5 has been prepared and its structure has been determined by single crystal X-ray diffraction: space group P21/n, a=7.542(6) Å, b=11.615(5) Å, c=5.305(3) Å, β=107.38(5)°, wR2=0.0447, R=0.0255. The structure consists of [Mg 2O 10] and [Bi 2O 10] dimers sharing their corners with [VO 4] tetrahedra. The ranges of bond lengths are 2.129-2.814 Å for Bi-O; 2.035-2.167 Å for Mg-O and 1.684-1.745 Å for V-O. V-O bond lengths determined from Raman band wavenumbers are between 1.679 and 1.747 Å. An emission band overlapping the entire visible region with a maximum around 650 nm is observed.

  1. Cloning, Expression, Purification, Crystallization and Preliminary X-ray Analysis of Mycoplasma Genitalium Protein MG289

    Energy Technology Data Exchange (ETDEWEB)

    Sippel, K.; Boehlein, S; Sakai, Y; Quirit, J; Agbandje-McKenna, M; Rosser, C; McKenna, R

    2009-01-01

    Mycoplasma genitalium is a human pathogen that is associated with nongonococcal urethritis in men and cervicitis in women. The cloning, expression, purification and crystallization of the protein MG289 from M. genitalium strain G37 are reported here. Crystals of MG289 diffracted X-rays to 2.8 {angstrom} resolution. The crystals belonged to the orthorhombic space group P2{sub 1}2{sub 1}2{sub 1}, with unit-cell parameters a = 49.7, b = 90.9, c = 176.1 {angstrom}. The diffraction data after processing had an overall R{sub merge} of 8.7%. The crystal structure of Cypl, the ortholog of MG289 from M. hyorhinis, has recently been determined, providing a reasonable phasing model; molecular replacement is currently under way.

  2. Bioequivalence of a single 400-mg dose of imatinib 100-mg oral tablets and a 400-mg tablet in healthy adult Korean volunteers.

    Science.gov (United States)

    Lee, Hae Won; Seong, Sook Jin; Park, Sung Min; Lee, Joomi; Gwon, Mi-Ri; Kim, Hyun-Ju; Lim, Sung Mook; Lim, Mi-Sun; Kim, Woomi; Yang, Dong Heon; Yoon, Young-Ran

    2015-06-01

    Imatinib mesylate (IM) is a selective tyrosine kinase inhibitor for the treatment of chronic myeloid leukemia and gastrointestinal stromal tumors. A new once-daily 400-mg film-coated tablet of imatinib has been developed by a pharmaceutical company in Korea. The present study was designed to assess and compare the PK parameters, bioavailability, and bioequivalence of the new imatinib 400-mg formulation (test) versus the conventional 100-mg formulation (reference) administered as a single 400-mg dose in healthy adult male volunteers. This randomized, open-label, single-dose, two-way crossover study was conducted in healthy Korean male volunteers. Eligible subjects were randomly assigned in a 1 : 1 ratio to receive 400 mg of the test (one 400-mg tablet) or reference (four 100-mg tablets) formulation, followed by a 2-week washout period and administration of the alternate formulation. Serial blood samples were collected at 0 (predose), 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 10, 12, 24, 48, and 72 hours after administration. Plasma imatinib concentrations were determined using liquid chromatography coupled with tandem mass spectrometry. The formulations were to be considered bioequivalent if the 90% confidence intervals (CIs) of the adjusted geometric mean ratios for Cmax, AUC(0-t), and AUC(0-∞)ž were within the predetermined range of 0.80 - 1.25. In total, 35 subjects completed the study. No serious adverse event was reported during the study. The 90% CIs of the adjusted geometric mean ratios of the test formulation to the reference formulation for C(max), AUC(0-t) and AUC(0-∞)ž of imatinib were all within the bioequivalence criteria range of 0.8 - 1.25. The test formulation of imatinib met the Korean regulatory requirements for bioequivalence. Both imatinib formulations were well-tolerated in all subjects.

  3. Effect of Platinum Group Metal Doping in Magnesium Diboride Wires

    DEFF Research Database (Denmark)

    Grivel, Jean-Claude; Alexiou, Aikaterini; Namazkar, Shahla

    2016-01-01

    The effect of some platinum group metals(PGM = Rh, Pd, and Pt) on the microstructure and critical current density of Cu/Nb-sheathed MgB2 wires has been studied using Mg1-x PGMxB2 powders with low doping levels. It was found that Pt and Pd do not enter the MgB2 lattice and have only limited influe...

  4. Comparison of the Effect of Naftopidil 75 mg and Tamsulosin 0.2 mg on the Bladder Storage Symptom With Benign Prostatic Hyperplasia: Prospective, Multi-institutional Study.

    Science.gov (United States)

    Kwon, Se Yun; Lee, Kyung Seop; Yoo, Tag Keun; Chung, Jae Il; Lee, Ji Youl; Hong, Jun Hyuk; Seo, Seong Il; Jung, Tae Young; Kwak, Cheol; Kang, Taek Won; Yun, Seok-Joong

    2018-01-01

    To compare the efficacies of naftopidil and tamsulosin in terms of reducing storage symptoms in patients with benign prostatic hyperplasia. This prospective randomized study was performed at 10 centers. Ninety-four patients that had been taking tamsulosin for more than 8 weeks, but had an Overactive Bladder Symptom Score (OABSS) of greater than 3 points, were initially enrolled. After a 1-week washout period, patients were divided into 2 groups. Forty-five patients were treated with tamsulosin 0.2 mg daily, and 49 patients were treated with naftopidil 75 mg daily for 8 weeks. Total International Prostate Symptoms Score (IPSS), storage symptom scores, nocturia times, OABSS, maximal flow rates (Q max ), and postvoid residual volumes were checked before and after the 8-week treatment period. Mean patient ages in the tamsulosin and naftopidil groups were 64.8 and 66.0 years, respectively. Baseline characteristics were not significantly different. In the tamsulosin group, mean total IPSS decreased from 19.1 to 15.1 after the 8-week treated period (P = .001), and in the naftopidil group, mean total IPSS decreased from 16.9 to 13.1 (P = .001). Mean storage symptom scores were reduced in the tamsulosin and naftopidil groups from 8.0 to 6.6 (P = .002) and from 7.6 to 6.1 (P = .001), respectively. Mean nocturia times in the naftopidil groups decreased significantly from 2.5 to 1.9 (P = .001), and mean OABSSs were reduced from 7.7 to 6.0 (P = .001) and from 7.4 to 6.0 (P = .001), respectively. Total IPSS, storage symptom scores, nocturia times, and OABSS were significantly reduced by naftopidil and tamsulosin. Moreover, the naftopidil group showed better improvements in nocturia than the tamsulosin group. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Detection of Mg spinel lithologies on central peak of crater ...

    Indian Academy of Sciences (India)

    identified Fe bearing Mg-spinel-rich rock types are defined by their strong 2-μm ... The Modified Gaussian Modeling (MGM) analysis ... study the deep crustal and/or upper mantle composition and may lead to a fresh ... Lunar surface; Mg-spinel; central peak; Theophilus; remote sensing. .... The explanation of these spec-.

  6. Projectile deformation effects in the breakup of 37Mg

    Directory of Open Access Journals (Sweden)

    Shubhchintak

    2016-01-01

    Full Text Available We study the breakup of 37Mg on Pb at 244MeV/u with the recently developed extended theory of Coulomb breakup within the postform finite range distorted wave Born approximation that includes deformation of the projectile. Comparing our calculated cross section with the available Coulomb breakup data we determine the possible ground state configuration of 37Mg.

  7. Phosphorus Doped Zn 1- x Mg x O Nanowire Arrays

    KAUST Repository

    Lin, S. S.; Hong, J. I.; Song, J. H.; Zhu, Y.; He, H. P.; Xu, Z.; Wei, Y. G.; Ding, Y.; Snyder, R. L.; Wang, Z. L.

    2009-01-01

    We demonstrate the growth of phosphorus doped Zn 1-xMg xO nanowire (NW) using pulsed laser deposition. For the first time, p-type Zn 0.92Mg 0.08O:P NWs are likely obtained In reference to atomic force microscopy based piezoelectric output

  8. Structural and transport properties of Sn-Mg alloys

    International Nuclear Information System (INIS)

    Meydaneri, F.; Saatci, E.; Oezdemir, M.; Ari, M.; Durmus, S.

    2010-01-01

    The structural and temperature dependence transport of Sn-Mg alloys have been investigated for five different samples (Pure Sn, Sn-1.0 wt % Mg , Sn-2.0 wt % Mg , Sn-6.0 wt.% Mg and Pure Mg). Scanning Electron Microscopy (SEM), x-ray diffraction (XRD) and Energy Dispersive x-ray Analysis (EDX) measurements were carried out in order to clarify the structural properties of the samples. It has been found that, the samples have tetragonal crystal symmetry except the pure Mg which has hexagonal crystal symmetry. The cell parameters decrease slightly with addition of Mg element. The SEM micrographs of the samples show that, the samples have smooth surfaces with clear grain boundary. There is no crack, porosity or defects on the surfaces. The electrical resistivity of the samples increases almost linearly with the increasing temperature, which were measured by four-point probe technique. The thermal conductivity values are in between 0.60-1.00 W/Km, which are decrease slightly with temperature and increase with composition of Mg. The thermal conductivity values of the alloys are in between the values of the pure samples. Thermal conductivity results of the alloys have been compared with available other studies and a good agreement has been seen between the results. In addition, the temperature coefficients of electrical resistivity and thermal conductivity have been determined, which are independent with the compositions of alloying elements

  9. Stabilization of Reactive MgO Surfaces by Ni Doping

    Science.gov (United States)

    Mazheika, Aliaksei; Levchenko, Sergey V.

    Ni-MgO solid solutions are promising materials for catalytic reduction of CO2 and dry reforming of CH4. To explain the catalytic activity, an ab initio study of Ni-substitutional defects in MgO (NiMg) has been performed. At first, the validation of the theory level was done. We compared results of CCSD(T) embedded-cluster calculations of NiMg formation energies and adsorption energies of CO, CO2 and H2 on them to the HSE(α) hybrid DFT functional with the fraction of the exact exchange α varied between 0 and 1. HSE(0.3) was found to be the best compromise in this study. Our periodic HSE(0.3) calculations show that NiMg defects are most stable at corner sites, followed by steps, and are least stable at (001) terraces. Thus, Ni-doping stabilizes stepped MgO surfaces. The dissociative adsorption of H2 on the terrace is found to be endothermic (+ 1 . 1 eV), whereas on (110) surface with NiMg it is highly exothermic (- 1 . 6 eV). Adsorbed CO2 is also significantly stabilized (- 0 . 6 vs. - 2 . 2 eV). These findings explain recent microcalorimetry measurements of H2 and CO2 adsorption at doped Ni-MgO samples. partially supported by UniCat (Deutsche Forschungsgemeinschaft).

  10. Sorption of malachite green (MG) by cassava stem biochar (CSB ...

    African Journals Online (AJOL)

    Cassava stem biochar (CSB) was produced by pyrolyzing CS at 500°C for 2 hours at nitrogen environment. Proximate and ultimate analyses were conducted on CS and CSB. Batch sorption experiment on synthetic MG wastewater was optimized for the sorbent dosage, MG solution pH and contact time. Sorption data was ...

  11. Strength and residual stress of Mg-PSZ after grinding

    NARCIS (Netherlands)

    van den Berg, P.H.J.; With, de G.

    1993-01-01

    The influence of grinding with two grinding wheels, differing mainly in diamond-grain size, on the properties of MgO-partially stabilized ZrO2 ceramics (Mg-PSZ) was examd. The residual stress, the amt. of monoclinic zirconia, and the strength of the material were detd. From these measurements, depth

  12. Search for C+ C clustering in Mg ground state

    Indian Academy of Sciences (India)

    2017-01-04

    Jan 4, 2017 ... Finite-range knockout theory predictions were much larger for (12C,212C) reaction, indicating a very small 12C−12C clustering in 24Mg. (g.s.) . Our present results contradict most of the proposed heavy cluster (12C+12C) structure models for the ground state of 24Mg. Keywords. Direct nuclear reactions ...

  13. WIPP Magnesium Oxide (MgO) - Planned Change Request

    Science.gov (United States)

    On April 10, 2006, the DOE submitted a planned change request pertaining to the amount of MgO emplaced in the WIPP repository. MgO is an engineered barrier that DOE included as part of the original WIPP Certification Decision.

  14. Mechanical alloying and sitering of TI - 10WT.% MG powders

    CSIR Research Space (South Africa)

    Machio, Christopher N

    2009-06-01

    Full Text Available A Ti-10wt.%Mg powder alloy has been produced by mechanical alloying. Elemental powders of Ti and Mg were ball milled in a Zoz-Simoloyer CM01 for 16 and 20 hours under argon. Mechanical alloying was followed by XRD, SEM and particle size analysis...

  15. Selective antibacterial effects of mixed ZnMgO nanoparticles

    International Nuclear Information System (INIS)

    Vidic, Jasmina; Stankic, Slavica; Haque, Francia; Ciric, Danica; Le Goffic, Ronan; Vidy, Aurore; Jupille, Jacques; Delmas, Bernard

    2013-01-01

    Antibiotic resistance has impelled the research for new agents that can inhibit bacterial growth without showing cytotoxic effects on humans and other species. We describe the synthesis and physicochemical characterization of nanostructured ZnMgO whose antibacterial activity was compared to its pure nano-ZnO and nano-MgO counterparts. Among the three oxides, ZnO nanocrystals—with the length of tetrapod legs about 100 nm and the diameter about 10 nm—were found to be the most effective antibacterial agents since both Gram-positive (B. subtilis) and Gram-negative (E. coli) bacteria were completely eradicated at concentration of 1 mg/mL. MgO nanocubes (the mean cube size ∼50 nm) only partially inhibited bacterial growth, whereas ZnMgO nanoparticles (sizes corresponding to pure particles) revealed high specific antibacterial activity to Gram-positive bacteria at this concentration. Transmission electron microscopy analysis showed that B. subtilis cells were damaged after contact with nano-ZnMgO, causing cell contents to leak out. Our preliminary toxicological study pointed out that nano-ZnO is toxic when applied to human HeLa cells, while nano-MgO and the mixed oxide did not induce any cell damage. Overall, our results suggested that nanostructured ZnMgO, may reconcile efficient antibacterial efficiency while being a safe new therapeutic for bacterial infections.

  16. Revisiting Mg–Mg2Ni System from Electronic Perspective

    Directory of Open Access Journals (Sweden)

    Zhao Qian

    2017-11-01

    Full Text Available Both Mg and Mg2Ni are promising electrode materials in conversion-type secondary batteries. Earlier studies have shown their single-phase prospects in electro-devices, while in this work, we have quantitatively reported the electronic properties of their dual-phase materials, that is, Mg–Mg2Ni alloys, and analyzed the underlying reasons behind the property changes of materials. The hypoeutectic Mg–Mg2Ni alloys are found to be evidently more conductive than the hypereutectic Mg–Mg2Ni system. The density functional theory (DFT calculations give the intrinsic origin of electronic structures of both Mg2Ni and Mg. The morphology of quasi-nanoscale eutectics is another factor that can affect the electronic properties of the investigated alloy system; that is, the electrical property change of the investigated alloys system is due to a combination of the intrinsic property difference between the two constituting phases and the change of eutectic microstructures that affect electron scattering. In addition, regarding the Mg–Mg2Ni alloy design for device applications, the electronic property and mechanical aspect should be well balanced.

  17. Multiband model for tunneling in MgB2 junctions

    NARCIS (Netherlands)

    Brinkman, Alexander; Golubov, Alexandre Avraamovitch; Rogalla, Horst; Dolgov, O.V.; Kortus, J.; Kong, Y.; Jepsen, O.; Andersen, O.K.

    2002-01-01

    A theoretical model for quasiparticle and Josephson tunneling in multiband superconductors is developed and applied to MgB2-based junctions. The gap functions in different bands in MgB2 are obtained from an extended Eliashberg formalism, using the results of band structure calculations. The

  18. Selective antibacterial effects of mixed ZnMgO nanoparticles

    Science.gov (United States)

    Vidic, Jasmina; Stankic, Slavica; Haque, Francia; Ciric, Danica; Le Goffic, Ronan; Vidy, Aurore; Jupille, Jacques; Delmas, Bernard

    2013-05-01

    Antibiotic resistance has impelled the research for new agents that can inhibit bacterial growth without showing cytotoxic effects on humans and other species. We describe the synthesis and physicochemical characterization of nanostructured ZnMgO whose antibacterial activity was compared to its pure nano-ZnO and nano-MgO counterparts. Among the three oxides, ZnO nanocrystals—with the length of tetrapod legs about 100 nm and the diameter about 10 nm—were found to be the most effective antibacterial agents since both Gram-positive ( B. subtilis) and Gram-negative ( E. coli) bacteria were completely eradicated at concentration of 1 mg/mL. MgO nanocubes (the mean cube size 50 nm) only partially inhibited bacterial growth, whereas ZnMgO nanoparticles (sizes corresponding to pure particles) revealed high specific antibacterial activity to Gram-positive bacteria at this concentration. Transmission electron microscopy analysis showed that B. subtilis cells were damaged after contact with nano-ZnMgO, causing cell contents to leak out. Our preliminary toxicological study pointed out that nano-ZnO is toxic when applied to human HeLa cells, while nano-MgO and the mixed oxide did not induce any cell damage. Overall, our results suggested that nanostructured ZnMgO, may reconcile efficient antibacterial efficiency while being a safe new therapeutic for bacterial infections.

  19. Selective antibacterial effects of mixed ZnMgO nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Vidic, Jasmina, E-mail: jasmina.vidic@jouy.inra.fr [VIM, Institut de la Recherche Agronomique (France); Stankic, Slavica, E-mail: slavica.stankic@insp.jussieu.fr; Haque, Francia [CNRS, Institut des Nanosciences de Paris, UMR 7588 (France); Ciric, Danica; Le Goffic, Ronan; Vidy, Aurore [VIM, Institut de la Recherche Agronomique (France); Jupille, Jacques [CNRS, Institut des Nanosciences de Paris, UMR 7588 (France); Delmas, Bernard [VIM, Institut de la Recherche Agronomique (France)

    2013-05-15

    Antibiotic resistance has impelled the research for new agents that can inhibit bacterial growth without showing cytotoxic effects on humans and other species. We describe the synthesis and physicochemical characterization of nanostructured ZnMgO whose antibacterial activity was compared to its pure nano-ZnO and nano-MgO counterparts. Among the three oxides, ZnO nanocrystals-with the length of tetrapod legs about 100 nm and the diameter about 10 nm-were found to be the most effective antibacterial agents since both Gram-positive (B. subtilis) and Gram-negative (E. coli) bacteria were completely eradicated at concentration of 1 mg/mL. MgO nanocubes (the mean cube size {approx}50 nm) only partially inhibited bacterial growth, whereas ZnMgO nanoparticles (sizes corresponding to pure particles) revealed high specific antibacterial activity to Gram-positive bacteria at this concentration. Transmission electron microscopy analysis showed that B. subtilis cells were damaged after contact with nano-ZnMgO, causing cell contents to leak out. Our preliminary toxicological study pointed out that nano-ZnO is toxic when applied to human HeLa cells, while nano-MgO and the mixed oxide did not induce any cell damage. Overall, our results suggested that nanostructured ZnMgO, may reconcile efficient antibacterial efficiency while being a safe new therapeutic for bacterial infections.

  20. Catalysis and Downsizing in Mg-Based Hydrogen Storage Materials

    Directory of Open Access Journals (Sweden)

    Jianding Li

    2018-02-01

    Full Text Available Magnesium (Mg-based materials are promising candidates for hydrogen storage due to the low cost, high hydrogen storage capacity and abundant resources of magnesium for the realization of a hydrogen society. However, the sluggish kinetics and strong stability of the metal-hydrogen bonding of Mg-based materials hinder their application, especially for onboard storage. Many researchers are devoted to overcoming these challenges by numerous methods. Here, this review summarizes some advances in the development of Mg-based hydrogen storage materials related to downsizing and catalysis. In particular, the focus is on how downsizing and catalysts affect the hydrogen storage capacity, kinetics and thermodynamics of Mg-based hydrogen storage materials. Finally, the future development and applications of Mg-based hydrogen storage materials is discussed.

  1. Theoretical Limiting Potentials in Mg/O2 Batteries

    DEFF Research Database (Denmark)

    Smith, Jeffrey G.; Naruse, Junichi; Hiramatsu, Hidehiko

    2016-01-01

    A rechargeable battery based on a multivalent Mg/O2 couple is an attractive chemistry due to its high theoretical energy density and potential for low cost. Nevertheless, metal-air batteries based on alkaline earth anodes have received limited attention and generally exhibit modest performance....... In addition, many fundamental aspects of this system remain poorly understood, such as the reaction mechanisms associated with discharge and charging. The present study aims to close this knowledge gap and thereby accelerate the development of Mg/O2 batteries by employing first-principles calculations...... by the presence of large thermodynamic overvoltages. In contrast, MgO2-based cells are predicted to be much more efficient: superoxide-terminated facets on MgO2 crystallites enable low overvoltages and round-trip efficiencies approaching 90%. These data suggest that the performance of Mg/O2 batteries can...

  2. Microstructure and properties of Mg-Al binary alloys

    Directory of Open Access Journals (Sweden)

    ZHENG Wei-chao

    2006-11-01

    Full Text Available The effects of different amounts of added Al, ranging from 1 % to 9 %, on the microstructure and properties of Mg-Al binary alloys were investigated. The results showed that when the amount of added Al is less than 5%, the grain size of the Mg-Al binary alloys decreases dramatically from 3 097 μm to 151 μm with increasing addition of Al. Further addition of Al up to 9% makes the grain size decrease slowly to 111 μm. The α-Mg dendrite arms are also refined. Increasing the amount of added Al decreases the hot cracking susceptibility of the Mg-Al binary alloys remarkably, and enhances the micro-hardness of the α-Mg matrix.

  3. Characterization of Mg-containing hydroxyapatites synthesized by combustion method

    Science.gov (United States)

    Kaygili, Omer; Keser, Serhat; Bulut, Niyazi; Ates, Tankut

    2018-05-01

    In the present paper, Mg-substituted hydroxyapatites with the morphology, composed of the stacked plate- and rod-like structures, were prepared at the temperature of 600 °C by combustion method using glycerine as a fuel. A significant decrease in the crystallite size values calculated for both Scherrer and Williamson-Hall methods is found. The crystallinity, lattice parameter of a, stress and anisotropic energy density values decreased by adding of Mg, whereas the lattice strain increased. The amount of HAp phase decreases with increasing amount of Mg and the β-tricalcium phosphate content increases. Mg incorporation the apatitic structure was detected. Depending on the increase in Mg content, Ca-deficiency was observed.

  4. Group typicality, group loyalty and cognitive development.

    Science.gov (United States)

    Patterson, Meagan M

    2014-09-01

    Over the course of childhood, children's thinking about social groups changes in a variety of ways. Developmental Subjective Group Dynamics (DSGD) theory emphasizes children's understanding of the importance of conforming to group norms. Abrams et al.'s study, which uses DSGD theory as a framework, demonstrates the social cognitive skills underlying young elementary school children's thinking about group norms. Future research on children's thinking about groups and group norms should explore additional elements of this topic, including aspects of typicality beyond loyalty. © 2014 The British Psychological Society.

  5. Separation of reaction mechanisms at low energy. Study of the reactions: {sup 27}Al(d,p) {sup 28}Al, {sup 24}Mg(d,p) {sup 25}Mg, and {sup 24}Mg(d, {alpha}) {sup 22}Na; Sur la separation des mecanismes de reaction a basse energie. Etude des reactions: {sup 27}Al(d,p) {sup 28}Al, {sup 24}Mg(d,p) {sup 25}Mg, et {sup 24}Mg(d, {alpha}) {sup 22}Na

    Energy Technology Data Exchange (ETDEWEB)

    Mermaz, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-06-01

    The two sets of angular distributions of (d,p) reactions on Al and Mg, measured between 2 and 6 MeV, have given the possibility to test, in analysing the statistical fluctuations of cross-section, the validity of the separation of their mean values in two parts, one 'direct', another given by the statistical mechanism. With the same method of analysis we have studied excitation functions for several alpha groups of the reaction {sup 24}Mg(d, {alpha}) {sup 22}Na and given an evidence for an intermediate structure for the alpha channel leading to the 3. excited state of {sup 22}Na. The angular distribution of the wide resonance at 15.9 MeV in {sup 26}Al has been obtained. (author) [French] Les deux ensembles de distributions angulaires des reactions (d,p) sur Al et Mg, mesures entre 2 et 6 MeV, nous ont permis, en analysant les fluctuations statistiques de sections efficaces, de verifier la possibilite de la separation de leurs valeurs moyennes en deux composantes: l'une 'directe', l'autre due au mecanisme statistique. Avec la meme methode d'analyse nous avons etudie les fonctions d'excitation des premiers groupes alpha de la reaction {sup 24}Mg(d,{alpha}) {sup 22}Na et mis en evidence une structure intermediaire pour la voie de reaction aboutissant au 3eme niveau de {sup 22}Na. Nous avons obtenu la distribution angulaire de la resonance large situee a une energie d'excitation de 15,9 MeV dans {sup 26}Al. (auteur)

  6. Separation of reaction mechanisms at low energy. Study of the reactions: {sup 27}Al(d,p) {sup 28}Al, {sup 24}Mg(d,p) {sup 25}Mg, and {sup 24}Mg(d, {alpha}) {sup 22}Na; Sur la separation des mecanismes de reaction a basse energie. Etude des reactions: {sup 27}Al(d,p) {sup 28}Al, {sup 24}Mg(d,p) {sup 25}Mg, et {sup 24}Mg(d, {alpha}) {sup 22}Na

    Energy Technology Data Exchange (ETDEWEB)

    Mermaz, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-06-01

    The two sets of angular distributions of (d,p) reactions on Al and Mg, measured between 2 and 6 MeV, have given the possibility to test, in analysing the statistical fluctuations of cross-section, the validity of the separation of their mean values in two parts, one 'direct', another given by the statistical mechanism. With the same method of analysis we have studied excitation functions for several alpha groups of the reaction {sup 24}Mg(d, {alpha}) {sup 22}Na and given an evidence for an intermediate structure for the alpha channel leading to the 3. excited state of {sup 22}Na. The angular distribution of the wide resonance at 15.9 MeV in {sup 26}Al has been obtained. (author) [French] Les deux ensembles de distributions angulaires des reactions (d,p) sur Al et Mg, mesures entre 2 et 6 MeV, nous ont permis, en analysant les fluctuations statistiques de sections efficaces, de verifier la possibilite de la separation de leurs valeurs moyennes en deux composantes: l'une 'directe', l'autre due au mecanisme statistique. Avec la meme methode d'analyse nous avons etudie les fonctions d'excitation des premiers groupes alpha de la reaction {sup 24}Mg(d,{alpha}) {sup 22}Na et mis en evidence une structure intermediaire pour la voie de reaction aboutissant au 3eme niveau de {sup 22}Na. Nous avons obtenu la distribution angulaire de la resonance large situee a une energie d'excitation de 15,9 MeV dans {sup 26}Al. (auteur)

  7. Resetting of Mg isotopes between calcite and dolomite during burial metamorphism: Outlook of Mg isotopes as geothermometer and seawater proxy

    Science.gov (United States)

    Hu, Zhongya; Hu, Wenxuan; Wang, Xiaomin; Lu, Yizhou; Wang, Lichao; Liao, Zhiwei; Li, Weiqiang

    2017-07-01

    Magnesium isotopes are an emerging tool to study the geological processes recorded in carbonates. Calcite, due to its ubiquitous occurrence and the large Mg isotope fractionation associated with the mineral, has attracted great interests in applications of Mg isotope geochemistry. However, the fidelity of Mg isotopes in geological records of carbonate minerals (e.g., calcite and dolomite) against burial metamorphism remains poorly constrained. Here we report our investigation on the Mg isotope systematics of a dolomitized Middle Triassic Geshan carbonate section in eastern China. Magnesium isotope analysis was complemented by analyses of Sr-C-O isotopic compositions, major and trace element concentrations, and petrographic and mineralogical features. Multiple lines of evidence consistently indicated that post-depositional diagenesis of carbonate minerals occurred to the carbonate rocks. Magnesium isotope compositions of the carbonate rocks closely follow a mixing trend between a high δ26Mg dolomite end member and a low δ26Mg calcite end member, irrespective of sample positions in the section and calcite/dolomite ratio in the samples. By fitting the measured Mg isotope data using a two-end member mixing model, an inter-mineral Δ26Mgdolomite-calcite fractionation of 0.72‰ was obtained. Based on the experimentally derived Mg isotope fractionation factors for dolomite and calcite, a temperature of 150-190 °C was calculated to correspond to the 0.72‰ Δ26Mgdolomite-calcite fractionation. Such temperature range matches with the burial-thermal history of the local strata, making a successful case of Mg isotope geothermometry. Our results indicate that both calcite and dolomite had been re-equilibrated during burial metamorphism, and based on isotope mass balance of Mg, the system was buffered by dolomite in the section. Therefore, burial metamorphism may reset Mg isotope signature of calcite, and Mg isotope compositions in calcite should be dealt with caution in

  8. Hydrogen storage in Mg: a most promising material

    International Nuclear Information System (INIS)

    Jain, I.P.; Jain, A.; Lal, C.

    2009-01-01

    In the last one decade hydrogen has attracted worldwide interest as an energy carrier. This has generated comprehensive investigations on the technology involved and how to solve the problems of production, storage and applications of hydrogen. The interest in hydrogen as energy of the future is due to it being a clean energy, most abundant element in the universe, the lightest fuel and richest in energy per unit mass. Hydrogen as a fuel can be used to cook food, drive cars, jet planes, run factories and for all our domestic energy requirements. It can provide cheap electricity. In short, hydrogen shows the solution and also allows the progressive and non-traumatic transition of today's energy sources, towards feasible safe reliable and complete sustainable energy chains. The present article deals with the hydrogen storage in metal hydrides with particular interest in Mg as it has potential to become one of the most promising storage materials. Many metals combine chemically with Hydrogen to form a class of compounds known as Hydrides. These hydrides can discharge hydrogen as and when needed by raising their temperature or pressure. An optimum hydrogen-storage material is required to have various properties viz. high hydrogen capacity per unit mass and unit volume which determines the amount of available energy, low dissociation temperature, moderate dissociation pressure, low heat of formation in order to minimize the energy necessary for hydrogen release, low heat dissipation during the exothermic hydride formation, reversibility, limited energy loss during charge and discharge of hydrogen, fast kinetics, high stability against O 2 and moisture for long cycle life, cyclibility, low cost of recycling and charging infrastructures and high safety. So far most of the hydrogen storage alloys such as LaNi 5 , TiFe, TiMn 2 , have hydrogen storage capacities, not more than 2 wt% which is not satisfactory for practical application as per DOE Goal. A group of Mg based

  9. Effect of Mg on the Microstructure and Corrosion Resistance of the Continuously Hot-Dip Galvanizing Zn-Mg Coating

    Directory of Open Access Journals (Sweden)

    Anping Dong

    2017-08-01

    Full Text Available The microstructure of continuously hot-dip galvanizing Zn-Mg coating was investigated in order to obtain the mechanism of the effects of Mg on the corrosion resistance. In this paper, the vertical section of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner was calculated. The results indicates that the phase composition of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner is the same as Zn-Mg binary phase diagram, suggesting Al in the Zn-Mg (ZM coatings mainly concentrates on the interfacial layer between the coating and steel substrate. The microstructure of continuously hot-dip galvanizing ZM coatings with 0.20 wt % Al containing 1.0–3.0 wt % Mg was investigated using tunneling electron microscopy (TEM. The morphology of Zn in the coating changes from bulk to strip and finally to mesh-like, and the MgZn2 changes from rod-like to mesh-like with the Mg content increasing. Al in the ZM coatings mainly segregates at the Fe2Al5 inhibition layer and the Mg added to the Zn bath makes this inhibition layer thinner and uneven. Compared to GI coating, the time of the first red rust appears increases by more than two-fold and expansion rate of red rust reduces by more than four-fold in terms of salt spray experiment. The ZM coating containing 2.0 wt % Mg has the best corrosion resistance. The enhanced corrosion resistance of ZM coatings mainly depends on different corrosion products.

  10. Effect of Mg content on microstructure and corrosion behavior of hot dipped Zn–Al–Mg coatings

    Energy Technology Data Exchange (ETDEWEB)

    Yao, Caizhen; Lv, Haibing [Research Centre of Laser Fusion, CAEP, P.O.Box 919-988-5, Mianyang, Sichuan 621900 (China); Zhu, Tianping [Department of Chemical and Materials Engineering, The University of Auckland, PB 92019, Auckland 1142 (New Zealand); Zheng, Wanguo [Research Centre of Laser Fusion, CAEP, P.O.Box 919-988-5, Mianyang, Sichuan 621900 (China); Yuan, Xiaodong, E-mail: xdyuan@caep.cn [Research Centre of Laser Fusion, CAEP, P.O.Box 919-988-5, Mianyang, Sichuan 621900 (China); Gao, Wei, E-mail: w.gao@auckland.ac.nz [Department of Chemical and Materials Engineering, The University of Auckland, PB 92019, Auckland 1142 (New Zealand)

    2016-06-15

    In this article, Zn–Al–Mg coatings were prepared by hot dipping method. The surface morphology, cross–section microstructure, microhardness, composition, corrosion behaviour of ZAM coatings were investigated by using X–ray diffraction (XRD), Optical microscope, Environmental scanning electron microscopy equipped with EDS (FESEM–EDS), Microhardness tester and Electrochemical analysis respectively. Corrosion test was also performed in a standard salt fog spray chamber. Microstructure studies indicates that Zn grain size was refined and eutectic areas at Zn grain boundary areas increased with increasing Mg content. ZA5M1.5 and ZA5M2 coatings have two distinct layers. Mg tends to exist in the outer layer while Al is in the inner layer. The inner layer is composed of Al{sub 5}Fe{sub 2}Zn{sub 0.4} intermetallic, which may to contribute to the microhardness. The outer layer is Zn grains surrounded by Zn–Mg etutectics, which may improve the corrosion resistance. The microhardness is more than 700 HV{sub 50g} for Al-rich layer and around 151 HV{sub 25g} for Mg-rich layer. The improved corrosion resistance of Zn–5%Al-1.5%Mg coating comes from the corrosion product of flocculent type simonkolleite, which prolongs the micro-path and impedes the movement of O{sub 2} and H{sub 2}O, ultimately retards the overall corrosion process. - Highlights: • Two-layer structured Zn–Al–Mg coatings were prepared by hot dipping method. • Mg exists in the outer layer while Al exists in the inner layer of Zn–Al–Mg coating. • Zn–Al–Mg coating has better protective ability than Zn and Zn–Al coatings. • The Mg-modified simonkolleite is the reason of the enhanced corrosion resistance.

  11. Mg doping of GaN by molecular beam epitaxy

    International Nuclear Information System (INIS)

    Lieten, R R; Buchowicz, G; Dubon, O; Motsnyi, V; Zhang, L; Cheng, K; Leys, M; Degroote, S; Borghs, G

    2011-01-01

    We present a systematic study on the influence of growth conditions on the incorporation and activation of Mg in GaN layers grown by plasma-assisted molecular beam epitaxy. We show that high quality p-type GaN layers can be obtained on GaN-on-silicon templates. The Mg incorporation and the electrical properties have been investigated as a function of growth temperature, Ga : N flux ratio and Mg : Ga flux ratio. It was found that the incorporation of Mg and the electrical properties are highly sensitive to the Ga : N flux ratio. The highest hole mobility and lowest resistivity were achieved for slightly Ga-rich conditions. In addition to an optimal Ga : N ratio, an optimum Mg : Ga flux ratio was also observed at around 1%. We observed a clear Mg flux window for p-type doping of GaN : 0.31% 17 cm -3 and a mobility of 15 cm 2 V -1 s -1 . Temperature-dependent Hall effect measurements indicate an acceptor depth in these samples of 100 meV for a hole concentration of 5.5 x 10 17 cm -3 . The corresponding Mg concentration is 5 x 10 19 cm -3 , indicating approximately 1% activation at room temperature. In addition to continuous growth of Mg-doped GaN layers we also investigated different modulated growth procedures. We show that a modulated growth procedure has only limited influence on Mg doping at a growth temperature of 800 deg. or higher. This result is thus in contrast to previously reported GaN : Mg doping at much lower growth temperatures of 500 deg. C.

  12. Pharmacokinetic characterization of three novel 4-mg nicotine lozenges
.

    Science.gov (United States)

    Sukhija, Manpreet; Srivastava, Reena; Kaushik, Aditya

    2018-03-01

    Nicotine replacement therapy (NRT) increases the probability of smoking cessation. This study was conducted to determine if three prototype 4-mg nicotine lozenges produced locally in India were bioequivalent to a globally marketed reference product, Nicorette® 4-mg nicotine lozenge. Healthy adult smokers (N = 39) were treated with three prototype 4-mg nicotine lozenges in comparison with a reference 4-mg lozenge in this single-center, randomized, open-label, single-dose, 4-way crossover study. Pharmacokinetic sampling was obtained to test for bioequivalence using maximal plasma concentration (Cmax) and extent of absorption (AUC0-t). Secondarily, AUC;0-∞, time to maximal plasma concentration (tmax), half-life (T1/2), elimination rate constant (Kel), and safety of the prototype lozenges versus the reference lozenge were compared. Each prototype 4-mg nicotine lozenge was found to be bioequivalent to the reference 4-mg nicotine lozenge based on the ratio of geometric means and 90% confidence intervals for Cmax, AUC0-t, and AUC;0-∞. Although tmax; was significantly longer for prototype III, all four lozenges achieved maximum plasma nicotine concentrations at a median of 1.5 hours. The safety profiles of the three prototype 4-mg lozenges did not differ from that of the 4-mg reference product. Each prototype 4-mg nicotine lozenge was bioequivalent to the reference 4-mg nicotine lozenge and was well tolerated. Furthermore, as these bioequivalent prototypes differed in in-vitro dissolution profiles, these data suggest that performance from the in -vitro method deployed is not a firm predictor of pharmacokinetic behavior.
.

  13. In vitro degradation and electrochemical corrosion evaluations of microarc oxidized pure Mg, Mg-Ca and Mg-Ca-Zn alloys for biomedical applications.

    Science.gov (United States)

    Pan, Yaokun; He, Siyu; Wang, Diangang; Huang, Danlan; Zheng, Tingting; Wang, Siqi; Dong, Pan; Chen, Chuanzhong

    2015-02-01

    Calcium phosphate (CaP) ceramic coatings were fabricated on pure magnesium (Mg) and self-designed Mg-0.6Ca, Mg-0.55Ca-1.74Zn alloys by microarc oxidation (MAO). The coating formation, growth and biomineralization mechanisms were discussed. The coating degradability and bioactivity were evaluated by immersion tests in trishydroxymethyl-aminomethane hydrochloric acid (Tris-HCl) buffer and simulated body fluid (SBF) solutions, respectively. The coatings and corrosion products were characterized by scanning electron microscope (SEM), X-ray diffractometer (XRD), X-ray photoelectron spectrometer (XPS) and fourier transform infrared spectrometer (FT-IR). The electrochemical workstation was used to investigate the electrochemical corrosion behaviors of substrates and coatings. Results showed that Mg-0.55Ca-1.74Zn alloy exhibits the highest mechanical strength and electrochemical corrosion resistance among the three alloys. The MAO-coated Mg-0.55Ca-1.74Zn alloy has the potential to be served as a biodegradable implant. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Effect of Calcination at Synthesis of Mg-Al Hydrotalcite Using co-Precipitation Method

    Directory of Open Access Journals (Sweden)

    Niar Kurnia Julianti

    2017-01-01

    Full Text Available The use of hydrotalcite in catalysis has wide attention in academic research and industrial parties. Based on its utilization, hydrotalcite can be active catalyst or support. This research is focused on the investigation of characteristic like spesific surface area of Mg-Al hydrotalcite which is prepared with different temperature of calcination. Synthesis of Mg-Al hydrotalcites with Mg/Al molar ratio 3:1 were prepared by co-precipitation method. Mg(NO33.6H2O and Al(NO33.9H2O as precursors of Mg-Al hydrotalcite. Na2CO3 was used as precipitant agent and NaOH was used as buffer solution. The solution was mixed and aging for 5 hours at 650oC. The dried precipitate was calcined at 2500oC, 3500oC, 4500oC, 5500oC and 6500oC. The characterization of functional group was determined by Fourier Transform Infra Red (FT-IR. The Identical peaks diffractogram were analyzed by X-Ray Diffraction (XRD. The spesific surface area was determined by adsorption-desorption of nitrogen. The largest surface area that obtained from the calcination temperature of 650oC is 156.252 m2/g.

  15. Site preference of Mg acceptors and improvement of p-type doping efficiency in nitride alloys.

    Science.gov (United States)

    Park, Ji-Sang; Chang, K J

    2013-06-19

    We perform first-principles density functional calculations to investigate the effect of Al and In on the formation energy and acceptor level of Mg in group-III nitride alloys. Our calculations reveal a tendency for the Mg dopants to prefer to occupy the lattice sites surrounded with Al atoms, whereas hole carriers are generated in In- or Ga-rich sites. The separation of the Mg dopants and hole carriers is energetically more favourable than a random distribution of dopants, being attributed to the local bonding effect of weak In and strong Al potentials in alloys. As a consequence, the Mg acceptor level, which represents the activation energy of Mg, tends to decrease with increasing numbers of Al next-nearest neighbours, whereas it increases as the number of In next-nearest neighbours increases. Based on the results, we suggest that the incorporation of higher Al and lower In compositions will improve the p-type doping efficiency in quaternary alloys, in comparison with GaN or AlGaN ternary alloys with similar band gaps.

  16. Formulación de metotrexato 50 mg solución inyectable Formulation of metotrexate 50 mg injectable solution

    Directory of Open Access Journals (Sweden)

    Armando Gato del Monte

    2006-08-01

    Full Text Available El metotrexato es un antimetabolito que se agrupa entre los antagonistas del ácido fólico, para el tratamiento de cariocarcinoma gestacional, cariocarcinoma destructivo y lunar hidatiforme, leucemia linfocítica aguda, profilaxis y tratamiento de leucemias meníngeas y terapia de mantenimiento en combinación con otros agentes quimioterapéuticos en diferentes tumores sólidos y linfomas no Hogkin, así como en artritis y psoriasis. Para desarrollar este producto se elaboraron los ensayos preliminares en la etapa de preformulación, se determinaron las características organolépticas, el pH y la concentración del principio activo. Mediante estos estudios se logró obtener una formulación de metotrexato 50 mg solución inyectable con características adecuadas, estable física, química, biológica y microbiológicamente. La formulación que se obtuvo se escaló industrialmente, la cual se envasó en bulbos que cumplen satisfactoriamente con los parámetros de calidad establecidos. Mediante el estudio de estabilidad realizado a estos lotes se comprobaron los parámetros de calidad al producto terminado, que aparecen en la Farmacopea de los Estados Unidos 26 (USP. Se le estableció al medicamento una fecha de vencimiento de 2 años bajo las condiciones de temperatura controlada de 2-8 °C y protegido de la luzMetotrexate is an antimetabolite that groups itslef among the folic acid antagonists for the treatment of gestational choriocarcinoma, destructive choriocarcinoma, lunar hydatidiform choriocarcinoma, acute lymphocytic leukemia, prophylaxis and treatment of meningeal leukemias and maintenance therapy combined with other chemotherapeutic agents in different solid tumors and non-Hodgkin lymphomas, as well as in arthritis and psoriasis. To develop this product, preliminary trials were made in the preformulation stage, and the organoleptic characteristics, pH, and the active principle concentration were determined. By these studies, it was

  17. Improved hydrogen sorption kinetics in wet ball milled Mg hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Li

    2011-05-04

    In this work, wet ball milling method is used in order to improve hydrogen sorption behaviour due to its improved microstructure of solid hydrogen materials. Compared to traditional ball milling method, wet ball milling has benefits on improvement of MgH{sub 2} microstructure and further influences on its hydrogen sorption behavior. With the help of solvent tetrahydrofuran (THF), wet ball milled MgH{sub 2} powder has much smaller particle size and its specific surface area is 7 times as large as that of dry ball milled MgH{sub 2} powder. Although after ball milling the grain size is decreased a lot compared to as-received MgH{sub 2} powder, the grain size of wet ball milled MgH{sub 2} powder is larger than that of dry ball milled MgH{sub 2} powder due to the lubricant effect of solvent THF during wet ball milling. The improved particle size and specific surface area of wet ball milled MgH{sub 2} powder is found to be determining its hydrogen sorption kinetics especially at relatively low temperatures. And it also shows good cycling sorption behavior, which decides on its industrial applicability. With three different catalysts MgH{sub 2} powder shows improved hydrogen sorption behavior as well as the cyclic sorption behavior. Among them, the Nb{sub 2}O{sub 5} catalyst is found to be the most effective one in this work. Compared to the wet ball milled MgH{sub 2} powder, the particle size and specific surface area of the MgH{sub 2} powder with catalysts are similar to the previous ones, while the grain size of the MgH{sub 2} with catalysts is much finer. In this case, two reasons for hydrogen sorption improvement are suggested: one is the reduction of the grain size. The other may be as pointed out in some literatures that formation of new oxidation could enhance the hydrogen sorption kinetics, which is also the reason why its hydrogen capacity is decreased compared to without catalysts. After further ball milling, the specific surface area of wet ball milled Mg

  18. Influence of a transition metal atom on the geometry and electronic structure of Mg and Mg-H clusters

    International Nuclear Information System (INIS)

    Siretskiy, M.Yu.; Shelyapina, M.G.; Fruchart, D.; Miraglia, S.; Skryabina, N.E.

    2009-01-01

    We report on the study of (MgH 2 ) n + M complexes (M = Ti or Ni) carried out within the framework of the cluster density functional theory (DFT) method. The influence of such transition metal atoms on the cluster geometry and electronic structure is discussed considering the stability of MgH 2 hydride.

  19. Ab-initio calculations of semiconductor MgGeP{sub 2} and MgGeAs{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Kocak, B.; Ciftci, Y.O., E-mail: yasemin@gazi.edu.tr

    2016-05-15

    Highlights: • MgGeP{sub 2} and MgGeAs{sub 2} are semiconductor compounds. • MgGeP{sub 2} and MgGeAs{sub 2} are energetically, mechanically and dynamically stable. • The electronic charge density contour plot shows that the nature of bonding is a mixture of ionic-covalent. - Abstract: In this study, we focus on structural, electronic, elastic, lattice dynamic and optic properties of MgGeP{sub 2} and MgGeAs{sub 2} using ab-initio density-functional theory (DFT) within Armiento-Mattson 2005 (AM05) scheme of the generalized gradient approximation (GGA) for the exchange-correlation potential. Our computed structural results are in reasonable agreement with the literature. The band gap of these compounds is predicted to be direct. Our elastic results prove that these compounds are mechanically stable. The obtained phonon spectra of MgGeP{sub 2} and MgGeAs{sub 2} do not exhibit any significant imaginary branches using GGA-AM05 for the exchange-correlation approximation. Further analysis of the optical response of the dielectric functions, optical reflectivity, refractive index, extinction coefficient and electron energy loss delves into for the energy range of 0–22.5 eV. It motivated that there exists an optical polarization anisotropy of these compounds for optoelectronic device applications.

  20. Thermal behaviour of Cu-Mg-Mn and Ni-Mg-Mn layered double hydroxides and characterization of formed oxides

    Czech Academy of Sciences Publication Activity Database

    Kovanda, F.; Grygar, Tomáš; Dorničák, V.; Rojka, T.; Bezdička, Petr; Jirátová, Květa

    2005-01-01

    Roč. 28, 1-4 (2005), s. 121-136 ISSN 0169-1317 Institutional research plan: CEZ:AV0Z40320502 Keywords : Cu-Mg-Mn basic carbonates * Ni-Mg-Mn hydrotalcite Subject RIV: CA - Inorganic Chemistry Impact factor: 1.324, year: 2005

  1. Ipilimumab 10 mg/kg versus ipilimumab 3 mg/kg in patients with unresectable or metastatic melanoma

    DEFF Research Database (Denmark)

    Ascierto, Paolo A; Del Vecchio, Michele; Robert, Caroline

    2017-01-01

    of ipilimumab 10 mg/kg versus 3 mg/kg. METHODS: This randomised, double-blind, multicentre, phase 3 trial was done in 87 centres in 21 countries worldwide. Patients with untreated or previously treated unresectable stage III or IV melanoma, without previous treatment with BRAF inhibitors or immune checkpoint...

  2. AREVA group overview; Presentation du groupe AREVA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-02-08

    This document presents the Group Areva, a world nuclear industry leader, from a financial holding company to an industrial group, operating in two businesses: the nuclear energy and the components. The structure and the market of the group are discussed, as the financial assets. (A.L.B.)

  3. Overgroups of root groups in classical groups

    CERN Document Server

    Aschbacher, Michael

    2016-01-01

    The author extends results of McLaughlin and Kantor on overgroups of long root subgroups and long root elements in finite classical groups. In particular he determines the maximal subgroups of this form. He also determines the maximal overgroups of short root subgroups in finite classical groups and the maximal overgroups in finite orthogonal groups of c-root subgroups.

  4. Interagency mechanical operations group numerical systems group

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    This report consists of the minutes of the May 20-21, 1971 meeting of the Interagency Mechanical Operations Group (IMOG) Numerical Systems Group. This group looks at issues related to numerical control in the machining industry. Items discussed related to the use of CAD and CAM, EIA standards, data links, and numerical control.

  5. Phase diagrams of aluminium alloys of Al-Cu-Mg, Al-Mg-Si-Cu, and Al-Mg-Li system

    International Nuclear Information System (INIS)

    Ber, L.B.; Kaputkin, E.Ya.

    2001-01-01

    Isothermal diagrams of phase transformations (DPT) and temperature-time charts (TTC) of variation of electric conductivity and of mechanical features at tension were plotted following thermal treatment according to the pattern of direct hardening and ageing and according to the pattern of normal aging for D16 commercial alloy, Al-Cu-Mg model alloy of the same system, AD37 commercial alloys of Al-Mg-Si-Cu and 1424 one of Al-Li-Mg system. Phase transformations were studied by means of fluorescence electron microscopy, micro-X-ray spectral analysis, X-ray phase analysis of single crystals and polycrystals and differential scanning calorimetry. For every alloy comparison of TTC and DPT enables to clarity the mechanism of phase composition effect on features and to optimize conditions of hardening cooling and ageing [ru

  6. In vivo and in vitro degradation comparison of pure Mg, Mg-10Gd and Mg-2Ag: a short term study

    Directory of Open Access Journals (Sweden)

    I Marco

    2017-02-01

    Full Text Available The purpose of this study was to compare short term in vitro and in vivo biodegradation studies with low purity Mg (> 99.94 %, Mg-10Gd and Mg-2Ag designed for biodegradable implant applications. Three in vitro testing conditions were applied, using (i phosphate buffered saline (PBS, (ii Hank’s balanced salt solution (HBSS and (iii Dulbecco’s modified eagle medium (DMEM in 5 % CO2 under sterile conditions. Gas evolution and mass loss (ML were assessed, as well as the degradation layer, by elemental mapping and scanning electron microscopy (SEM. In vivo, implantations were performed on male Sprague-Dawley rats evaluating both, gas cavity volume and implant volume reduction by micro-computed tomography (µCT, 7 d after implantation. Samples were produced by casting, solution heat treatment and extrusion in disc and pin shape for the in vitro and in vivo experiments, respectively. Results showed that when the processing of the Mg sample varied, differences were found not only in the alloy impurity content and the grain size, but also in the corrosion behaviour. An increase of Fe and Ni or a large grain size seemed to play a major role in the degradation process, while the influence of alloying elements, such as Gd and Ag, played a secondary role. Results also indicated that cell culture conditions induced degradation rates and degradation layer elemental composition comparable to in vivo conditions. These in vitro and in vivo degradation layers consisted of Mg hydroxide, Mg-Ca carbonate and Ca phosphate.

  7. Effect of solution concentration on sealing treatment of Mg-Al hydrotalcite film on AZ91D Mg alloy

    Directory of Open Access Journals (Sweden)

    Qiangsheng Dong

    2017-09-01

    Full Text Available Cerium-based sealing treatment was developed for Mg-Al hydrotalcite film on AZ91D Mg alloy, and the influence of cerium salt solution was investigated to modify the surface integrity and corrosion resistance. Scanning electron microscope (SEM and X-ray diffraction (XRD measurements were carried out to analyze the surface morphology and phase composition. The corrosion resistance of Mg-Al hydrotalcite film after sealing treatment was evaluated by the polarization curve and electrochemical impedance spectroscopy (EIS tests. The results showed that lower concentration of Ce-containing solution was beneficial to seal the micro-cracks on Mg-Al hydrotalcite film, and improve the surface integrity and corrosion resistance; higher concentration of Ce-containing solution could seal fewer micro-cracks, and the corrosion resistance was decreased owing to the disintegration of Mg-Al hydrotalcite film.

  8. Phase-field simulations of dendrite morphologies and selected evolution of primary {alpha}-Mg phases during the solidification of Mg-rich Mg-Al-based alloys

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Mingyue [Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, Department of Mechanical Engineering, Tsinghua University, Beijing 100084 (China); Jing, Tao; Liu, Baicheng [Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, Department of Mechanical Engineering, Tsinghua University, Beijing 100084 (China)

    2009-10-15

    A formulation of solid-liquid interfacial thermodynamic and kinetic anisotropic characteristics for hexagonal close-packed metals is proposed. The two- and three-dimensional dendritic growth of primary Mg in undercooled Mg-Al alloy melts is modeled using the phase-field method, based on a combination of crystallographic lattice symmetry and experimental observations. The morphologies of three-dimensional dendrites are obtained and the calculated results show intricately hierarchical branched structures. The excess free energy of the solution system is based on the Redlich-Kister model.

  9. Phase-field simulations of dendrite morphologies and selected evolution of primary α-Mg phases during the solidification of Mg-rich Mg-Al-based alloys

    International Nuclear Information System (INIS)

    Wang, Mingyue; Jing, Tao; Liu, Baicheng

    2009-01-01

    A formulation of solid-liquid interfacial thermodynamic and kinetic anisotropic characteristics for hexagonal close-packed metals is proposed. The two- and three-dimensional dendritic growth of primary Mg in undercooled Mg-Al alloy melts is modeled using the phase-field method, based on a combination of crystallographic lattice symmetry and experimental observations. The morphologies of three-dimensional dendrites are obtained and the calculated results show intricately hierarchical branched structures. The excess free energy of the solution system is based on the Redlich-Kister model.

  10. Comparison of 1 mg and 2 mg overnight dexamethasone suppression tests for the screening of Cushing's syndrome in obese patients.

    Science.gov (United States)

    Sahin, Mustafa; Kebapcilar, Levent; Taslipinar, Abdullah; Azal, Omer; Ozgurtas, Taner; Corakci, Ahmet; Akgul, Emin Ozgur; Taslipinar, Mine Yavuz; Yazici, Mahmut; Kutlu, Mustafa

    2009-01-01

    Obesity is currently a major public health problem and one of the potential underlying causes of obesity in a minority of patients is Cushing's syndrome (CS). Traditionally, the gold standard screening test for CS is 1 mg dexamethasone overnight suppression test. However, it is known that obese subjects have high false positive results with this test. We have therefore compared the 1 mg and 2 mg overnight dexamethasone suppression tests in obese subjects. Patients whose serum cortisol after ODST was >50 nM underwent and a low-dose dexamethasone suppression test (LDDST); 24-hour urine cortisol was collected for basal urinary free cortisol (UFC). For positive results after overnight 1-mg dexamethasone suppression test we also performed the overnight 2-mg dexamethasone suppression test. We prospectively evaluated 100 patients (22 men and 78 women, ranging in age from 17 to 73 years with a body mass index (BMI) >30 kg/m2 who had been referred to our hospital-affiliated endocrine clinic because of simple obesity. Suppression of serum cortisol to suppression. Thyroid function tests, lipid profiles, homocysteine, antithyroglobulin, anti-thyroid peroxidase antibody levels, vitamin B12, folate levels, insulin resistance [by homeostasis model assessment (HOMA)] and 1.0 mg postdexamethasone (postdex) suppression cortisol levels were measured. We found an 8% false-positive rate in 1 mg overnight test and 2% in 2 mg overnight test (p=0.001). There was no correlation between the cortisol levels after ODST and other parameters. Our results indicate that the 2 mg overnight dexamethasone suppression test (ODST) is more convenient and accurate than 1-mg ODST as a screening test for excluding CS in subjects with simple obesity.

  11. Mg{sub 2}Sn heterostructures on Si(111) substrate

    Energy Technology Data Exchange (ETDEWEB)

    Dózsa, L., E-mail: dozsa@mfa.kfki.hu [Institute of Technical Physics and Materials Science, Centre for Energy Research, Hungarian Academy of Sciences, 1525 Budapest Pf, 49 (Hungary); Galkin, N.G. [Institute of Automation and Control Processes of FEB RAS, 5 Radio St., Vladivostok 690041 (Russian Federation); Far Eastern Federal University, 8 Sukhanova St., Vladivostok 690950 (Russian Federation); Pécz, B.; Osváth, Z.; Zolnai, Zs. [Institute of Technical Physics and Materials Science, Centre for Energy Research, Hungarian Academy of Sciences, 1525 Budapest Pf, 49 (Hungary); Németh, A. [Wigner Research Centre for Physics, Institute for Particle and Nuclear Physics, 1525 Budapest, P.O.B. 49 (Hungary); Galkin, K.N.; Chernev, I.M. [Institute of Automation and Control Processes of FEB RAS, 5 Radio St., Vladivostok 690041 (Russian Federation); Dotsenko, S.A. [Institute of Automation and Control Processes of FEB RAS, 5 Radio St., Vladivostok 690041 (Russian Federation); Far Eastern Federal University, 8 Sukhanova St., Vladivostok 690950 (Russian Federation)

    2017-05-31

    Highlights: • Investigations show that the nanostructures have significant changes during the applied regular experimental investigations. • It is especially true for transmittance electron microscopy, where the investigated layers have to be thinned near to the nanostructure size. • The time order of the applied experimental investigation has a dominant effect on the experimetal results. - Abstract: Thin un-doped and Al doped polycrystalline Mg-stannide films consisting mainly of Mg{sub 2}Sn semiconductor phase have been grown by deposition of Sn-Mg multilayers on Si(111) p-type wafers at room temperature and annealing at 150 °C. Rutherford backscattering measurement spectroscopy (RBS) were used to determine the amount of Mg and Sn in the structures. Raman spectroscopy has shown the layers contain Mg{sub 2}Sn phase. Cross sectional transmission electron microscopy (XTEM) measurements have identified Mg{sub 2}Sn nanocrystallites in hexagonal and cubic phases without epitaxial orientation with respect to the Si(111) substrate. Significant oxygen concentration was found in the layer both by RBS and TEM. The electrical measurements have shown laterally homogeneous conductivity in the grown layer. The undoped Mg{sub 2}Sn layers show increasing resistivity with increasing temperature indicating the scattering process dominates the resistance of the layers, i.e. large concentration of point defects was generated in the layer during the growth process. The Al doped layer shows increase of the resistance at low temperature caused by freeze out of free carriers in the Al doped Mg{sub 2}Sn layer. The measurements indicate the necessity of protective layer grown over the Mg{sub 2}Sn layers, and a short time delay between sample preparation and cross sectionalTEM analysis, since the unprotected layer is degraded by the interaction with the ambient.

  12. Relationships Between Temperature, pH, and Crusting on Mg/Ca Ratios in Laboratory-Grown Neogloboquadrina Foraminifera

    Science.gov (United States)

    Davis, Catherine V.; Fehrenbacher, Jennifer S.; Hill, Tessa M.; Russell, Ann D.; Spero, Howard J.

    2017-11-01

    Mg/Ca ratio paleothermometry in foraminifera is an important tool for the reconstruction and interpretation of past environments. However, existing Mg/Ca:temperature relationships for planktic species inhabiting middle- and high-latitude environments are limited by a lack of information about the development and impact of low-Mg/Ca ratio "crusts" and the influence of the carbonate system on Mg/Ca ratios in these groups. To address this, we cultured individual specimens of Neogloboquadrina incompta and Neogloboquadrina pachyderma in seawater across a range of temperature (6°-12°C) and pH (7.4-8.2). We found by laser ablation inductively couple mass spectrometry analyses of shells that culture-grown crust calcite in N. incompta had a lower Mg/Ca ratio than ontogenetic calcite formed at the same temperature, suggesting that temperature is not responsible for the low-Mg/Ca ratio of neogloboquadrinid crusts. The Mg/Ca:temperature relationship for ontogenetic calcite in N. incompta was consistent with the previously published culture-based relationship, and no significant relationship was found between Mg/Ca ratios and pH in this species. However, the Mg/Ca ratio in laboratory-cultured N. pachyderma was much higher than that reported in previous core top and sediment trap samples, due to lack of crust formation in culture. Application of our ontogenetic calcite-specific Mg/Ca:temperature relationships to fossil N. pachyderma and N. incompta from five intervals in cores from the Santa Barbara Basin and the Bering Sea shows that excluding crust calcite in fossil specimens may improve Mg/Ca-based temperature estimates.

  13. Integral data test of HENDL1.0/MG and visualBUS with neutronics shielding experiments. Pt.1

    International Nuclear Information System (INIS)

    Gao Chunjing; Deng Tieru; Xu Dezheng; Li Jingjing; Wu Yican

    2004-01-01

    HENDL1.0/MG, a multi-group working library of the Hybrid Evaluated Nuclear Data Library, was home-developed by the FDS Team of ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) on the basis of several national data libraries. To validate and qualify the process of producing HENDL1.0/MG, simulating calculations of a series of existent spherical shell benchmark experiments (Al, Mo, Co, Ti, Mn, W, Be and V) have been performed with HENDL1.0/MG and the multifunctional neutronics code system named VisualBUS home-developed also by FDS Team. (authors)

  14. Formation of MgB{sub 2} at ambient temperature with an electrochemical process: a plausible mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Jadhav, A B [School of Energy Studies, Department of Physics, Shivaji University, Kolhapur 416 004 (India); Subhedar, K M [School of Energy Studies, Department of Physics, Shivaji University, Kolhapur 416 004 (India); Hyam, R S [School of Energy Studies, Department of Physics, Shivaji University, Kolhapur 416 004 (India); Talaptra, A [Variable Energy Cyclotron Centre (VECC), I/AF, Bidhan Nagar, Kolkata-700 064 (India); Sen, Pintu [Variable Energy Cyclotron Centre (VECC), I/AF, Bidhan Nagar, Kolkata-700 064 (India); Bandyopadhyay, S K [Variable Energy Cyclotron Centre (VECC), I/AF, Bidhan Nagar, Kolkata-700 064 (India); Pawar, S H [School of Energy Studies, Department of Physics, Shivaji University, Kolhapur 416 004 (India)

    2005-06-01

    The binary intermetallic MgB{sub 2} superconductor has been synthesized by many research groups. However, the mechanism of its formation is not clearly understood. In this communication, a comprehensive mechanism of the formation of MgB{sub 2} from Le Chatelier's principle of equilibrium reaction has been explained both for solid-state reaction and electrodeposition methods. (rapid communication)

  15. Theory of Lie groups

    CERN Document Server

    Chevalley, Claude

    2018-01-01

    The standard text on the subject for many years, this introductory treatment covers classical linear groups, topological groups, manifolds, analytic groups, differential calculus of Cartan, and compact Lie groups and their representations. 1946 edition.

  16. Pulse laser irradiation into superconducting MgB2 detector

    International Nuclear Information System (INIS)

    Fujiwara, Daisuke; Miki, Shigehito; Satoh, Kazuo; Yotsuya, Tsutomu; Shimakage, Hisashi; Wang, Zhen; Okayasu, Satoru; Katagiri, Masaki; Machida, Masahiko; Kato, Masaru; Ishida, Takekazu

    2005-01-01

    We performed 20-ps pulse laser irradiation experiments on a MgB 2 neutron detector to know a thermal-relaxation process for designing a MgB 2 neutron detector. The membrane-type structured MgB 2 device was fabricated to minimize the heat capacity of sensing part of a detector as well as to enhance its sensitivity. We successfully observed a thermal-relaxation signal resulting from pulse laser irradiation by developing a detection circuit. The response time was faster than 1 μs, meaning that the detector would be capable of counting neutrons at a rate of more than 10 6 events per second

  17. Interaction of hydrogen with an Mg-Al alloy

    International Nuclear Information System (INIS)

    Andreasen, A.; Sorensen, M.B.; Burkarl, R.; Moller, B.; Molenbroek, A.M.; Pedersen, A.S.; Andreasen, J.W.; Nielsen, M.M.; Jensen, T.R.

    2005-01-01

    The interaction of hydrogen with an Mg-Al alloy pre-exposed to air have been studied with in situ time resolved X-ray powder diffraction. Phase fractions as a function of time are derived from series of consecutive diffraction patterns allowing kinetic analysis. The apparent activation energy for dehydrogenation of the Mg-Al alloy is found to be 160 kJ/mol. This is not significantly higher than for pure and fully activated Mg. It is suggested that the addition of Al improves the resistance towards oxygen contamination

  18. First-Principles Study of the Li-Mg-N-H System: Compound Structures and Hydrogen Storage Properties

    Science.gov (United States)

    Michel, Kyle; Ozolins, Vidvuds

    2009-03-01

    The Li-Mg-N-H system is studied with the addition of the Li4Mg(NH)3, MgNH, and Li4NH compounds using first-principles density-functional theory (DFT) calculations. A structure for the mixed imide Li4Mg(NH)3 is proposed, belonging to the Imm2 space group. A new structure for Li2Mg(NH)2 is given that has Pca21 symmetry; this compound has been previously reported as having Iba2 symmetry. The stability of the Li4Mg-imide is studied with respect to its decomposition reactions. The static, zero-point (ZPE), and vibrational energies of all relevant compounds belonging to this system are reported along with their predicted lowest-energy structures. Dehydrogenation reactions are presented that involve these phases and which are found to be spontaneously occurring within 400 K of room temperature. It is predicted that mixing LiH, LiNH2, and Li2Mg(NH)2 at 505 K will form Li4Mg(NH)3 with the release of 2.04 wt. % H2.

  19. Low temperature phase transition and crystal structure of CsMgPO{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Orlova, Maria, E-mail: maria.p.orlova@gmail.com [Institute of Mineralogy and Petrography, University of Innsbruck, Innrain 52, Innsbruck 6020 (Austria); Khainakov, Sergey [Departamento de Química Física y Analítica, Universidad de Oviedo—CINN, 33006 Oviedo (Spain); Servicios Científico Técnicos, Universidad de Oviedo, 33006 Oviedo (Spain); Michailov, Dmitriy [Department of Chemistry, University of Nizhny Novgorod, 23 Gagarin av., Nizhny Novgorod 603950 (Russian Federation); Perfler, Lukas [Institute of Mineralogy and Petrography, University of Innsbruck, Innrain 52, Innsbruck 6020 (Austria); Langes, Christoph [Institute of Pharmacy, University of Innsbruck, Innrain 52, Innsbruck 6020 (Austria); Kahlenberg, Volker [Institute of Mineralogy and Petrography, University of Innsbruck, Innrain 52, Innsbruck 6020 (Austria); Orlova, Albina [Department of Chemistry, University of Nizhny Novgorod, 23 Gagarin av., Nizhny Novgorod 603950 (Russian Federation)

    2015-01-15

    CsMgPO{sub 4} doped with radioisotopes is a promising compound for usage as a radioactive medical source. However, a low temperature phase transition at temperatures close to ambient conditions (∼−40 °C) was observed. Information about such kind of structural changes is important in order to understand whether it can cause any problem for medical use of this compound. The phase transition has been investigated in detail using synchrotron powder diffraction, Raman spectroscopy and DFT calculations. The structure undergoes a transformation from an orthorhombic modification, space group Pnma (RT phase) to a monoclinic polymorph, space group P2{sub 1}/n (LT phase). New LT modification adopts similar to RT but slightly distorted unit cell: a=9.58199(2) Å, b=8.95501(1) Å, c=5.50344(2) Å, β=90.68583(1)°, V=472.198(3) Å{sup 3}. CsMgPO{sub 4} belongs to the group of framework compounds and is made up of strictly alternating MgO{sub 4}- and PO{sub 4}-tetrahedra sharing vertices. The cesium counter cations are located in the resulting channel-like cavities. Upon the transformation a combined tilting of the tetrahedra is observed. A comparison with other phase transitions in ABW-type framework compounds is given. - Graphical abstract: Structural behavior of β-tridymite-type phosphate CsMgPO{sub 4}, considered as potential chemical form for radioactive Cs-source has been studied at near ambient temperatures. A phase transition at (∼−40 °C) has been found and investigated. It has been established that the known orthorhombic RT modification, space group Pnma, adopts a monoclinic cell with space group P2{sub 1}/n at low temperatures. In this paper, we present results of structural analysis of changes accompanying this phase transition and discuss its possible impact on the application properties. - Highlights: • β-Tridymite type phosphate CsMgPO{sub 4} undergoes so called translationengleiche phase transition of index 2 at −40 °C. • The structure

  20. The role of Mg in the crystallization of monohydrocalcite

    Science.gov (United States)

    Rodriguez-Blanco, Juan Diego; Shaw, Samuel; Bots, Pieter; Roncal-Herrero, Teresa; Benning, Liane G.

    2014-02-01

    Monohydrocalcite is a member of the carbonate family which forms in Mg-rich environments at a wide range of Mg/Ca ratios Mg2+aq/Ca2+aq≥0.17stock solutions. However, its crystallite and particle size are inversely proportional to these parameters. At high supersaturations (SIMHC = 3.89) nanometer-sized single crystals of monohydrocalcite form, while at low values (SIMHC = 2.43) the process leads to low-angle branching spherulites. Many carbonates produced during biomineralization form at similar conditions to most synthetic monohydrocalcites, and thus we hypothesize that some calcite or aragonite deposits found in the geologic record that have formed at high Mg/Ca ratios could be secondary in origin and may have originally formed via a metastable monohydrocalcite intermediate. High-Mg monohydrocalcite (χMgCO3 > 0.06) consists of individual nanometer-sized crystals (500 °C (Fig. 9b). Such high-Mg monohydrocalcites are uncommon in nature, but can be synthesized in the laboratory at high initial supersaturation levels (SI > 3.25). Low-Mg monohydrocalcite (χMgCO3 bonded to Mg, so it fully dehydrates at low temperatures (150-200 °C). They have the same composition as natural monohydrocalcites reported in the literature, and can be synthesized in the laboratory at lower supersaturation levels (SI relationships. Firstly, our on-line experiment shows an increase in nanocrystal sizes during the secondary crystallization of monohydrocalcite, which is coupled with a significant decrease in χMgCO3 (from ˜0.26 to ˜0.065). This corresponds to the transition from high- to low-Mg monohydrocalcite, suggesting that the former would be metastable and rapidly transforming to the latter, possibly triggered by the removal of Mg from aqueous solution. Secondly, Davis et al. (2000) determined that the solubility of Mg-calcite (Ca1-xMgxCO3; x = 0-0.20) varies by approximately half an order of magnitude depending on the Mg content of the solid (Ksp = 10-8.0-10-8.5). A similar

  1. Introduction to Sporadic Groups

    Directory of Open Access Journals (Sweden)

    Luis J. Boya

    2011-01-01

    Full Text Available This is an introduction to finite simple groups, in particular sporadic groups, intended for physicists. After a short review of group theory, we enumerate the 1+1+16=18 families of finite simple groups, as an introduction to the sporadic groups. These are described next, in three levels of increasing complexity, plus the six isolated ''pariah'' groups. The (old five Mathieu groups make up the first, smallest order level. The seven groups related to the Leech lattice, including the three Conway groups, constitute the second level. The third and highest level contains the Monster group M, plus seven other related groups. Next a brief mention is made of the remaining six pariah groups, thus completing the 5+7+8+6=26 sporadic groups. The review ends up with a brief discussion of a few of physical applications of finite groups in physics, including a couple of recent examples which use sporadic groups.

  2. Catalytic activity of Co-Mg-Al, Cu-Mg-Al and Cu-Co-Mg-Al mixed oxides derived from hydrotalcites in SCR of NO with ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Chmielarz, Lucjan; Kustrowski, Piotr; Rafalska-Lasocha, Alicja [Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Krakow (Poland); Majda, Dorota; Dziembaj, Roman [Regional Laboratory for Physicochemical Analyses and Structural Research, Ingardena 3, 30-060 Krakow (Poland)

    2002-01-10

    M-Mg-Al hydrotalcites (where M=Cu{sup 2+}, Co{sup 2+} and Cu{sup 2+}+Co{sup 2+}) with M ranging from 5 to 20% (as atomic ratio) were prepared by co-precipitation method. Obtained samples were characterised by XRD and TGA techniques. The influence of transition metal content on thermal decomposition of hydrotalcites was observed. Calcination of the hydrotalcites at 600C resulted in the formation of mixed oxides with surface areas in the range 71-154m{sup 2}/g. Calcined hydrotalcites were tested as catalysts in the selective reduction of NO with ammonia (NO-SCR). The catalytic activity depends on the kind of transition metal, as well as its content. For the NO-SCR the following reactivity order was found: Cu-Mg-Al>Cu-Co-Mg-Al>Co-Mg-Al. Temperature-programmed methods (TPD, TPSR, stop flow-TPD), as well as FT-IR spectroscopy have been applied to determine interaction of NO and NH{sub 3} molecules with the catalyst surface.

  3. Synthesis of Mg(OH)2, MgO, and Mg nanoparticles using laser ablation of magnesium in water and solvents

    Energy Technology Data Exchange (ETDEWEB)

    Tran, P.X.; Howard, B.H.; Martello, D.V.; Soong, Y.; Chyu, M.K.

    2008-01-01

    laser ablation of magnesium in deionized water (OW), solutions of OW and sodium dodecyl sulfate (50S) with different concentrations, acetone and 2-propanol has been conducted, The results showed that ablation in acetone and 2-propanol yielded MgO and Mg nanocrystallites as isolated particles and agglomerated chains probably intermixed with organic residues resulting from the alterationj decomposition of the solvents under the high-energy conditions. Brucite-like Mg(OH)2 particles were mainly produced by laser ablation of Mg in either OW or OW~SOS solutions. Ablation in OW yielded particles of fiber-like shapes having a diameter of about 5-lOnm and length as long as 150nm. Materials produced in DW-SOS solutions were composed of various size and shape particles, Some had rough surfaces with irregular shapes. Small particles were about 20-30nm and larger particles were about 120 nm. Particles with rod-like, triangular, and plate-like shapes were also observed.

  4. Synthesis of Mg(OH)2, MgO, and Mg nanoparticles using laser ablation of magnesium in water and solvents

    Energy Technology Data Exchange (ETDEWEB)

    Phuoc, Tran X. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Howard, Bret. H. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Martello, Donald V. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Soong, Yee [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Chyu, Minking K. [Univ. of Pittsburgh, PA (United States)

    2008-11-01

    Laser ablation of magnesium in deionized water (DW), solutions of DW and sodium dodecyl sulfate (SDS) with different concentrations, acetone and 2-propanol has been conducted. The results showed that ablation in acetone and 2-propanol yielded MgO and Mg nanocrystallites as isolated particles and agglomerated chains probably intermixed with organic residues resulting from the alteration/decomposition of the solvents under the high-energy conditions. Brucite-like Mg(OH)2 particles were mainly produced by laser ablation of Mg in either DW or DW-SDS solutions. Ablation in DW yielded particles of fiber-like shapes having a diameter of about 5-10nm and length-as long as 150 nm. Materials produced in DW-SDS solutions were composed of various size and shape particles. Some had rough surfaces with irregular shapes. Small particles were about 20-30 nm and larger particles were about 120 nm. Particles with rodlike, triangular, and plate-like shapes were also observed.

  5. Synthesis of Mg(OH) 2, MgO, and Mg nanoparticles using laser ablation of magnesium in water and solvents

    Science.gov (United States)

    Phuoc, Tran X.; Howard, Bret. H.; Martello, Donald V.; Soong, Yee; Chyu, Minking K.

    2008-11-01

    Laser ablation of magnesium in deionized water (DW), solutions of DW and sodium dodecyl sulfate (SDS) with different concentrations, acetone and 2-propanol has been conducted. The results showed that ablation in acetone and 2-propanol yielded MgO and Mg nanocrystallites as isolated particles and agglomerated chains probably intermixed with organic residues resulting from the alteration/decomposition of the solvents under the high-energy conditions. Brucite-like Mg(OH) 2 particles were mainly produced by laser ablation of Mg in either DW or DW-SDS solutions. Ablation in DW yielded particles of fiber-like shapes having a diameter of about 5-10 nm and length as long as 150 nm. Materials produced in DW-SDS solutions were composed of various size and shape particles. Some had rough surfaces with irregular shapes. Small particles were about 20-30 nm and larger particles were about 120 nm. Particles with rod-like, triangular, and plate-like shapes were also observed.

  6. Defect kinetics in spinels: Long-time simulations of MgAl2O4, MgGa2O4, and MgIn2O4

    International Nuclear Information System (INIS)

    Uberuaga, B. P.; Voter, A. F.; Sickafus, K. E.; Bacorisen, D.; Smith, Roger; Ball, J. A.; Grimes, R. W.

    2007-01-01

    Building upon work in which we examined defect production and stability in spinels, we now turn to defect kinetics. Using temperature accelerated dynamics (TAD), we characterize the kinetics of defects in three spinel oxides: magnesium aluminate MgAl 2 O 4 , magnesium gallate MgGa 2 O 4 , and magnesium indate MgIn 2 O 4 . These materials have varying tendencies to disorder on the cation sublattices. In order to understand chemical composition effects, we first examine defect kinetics in perfectly ordered, or normal, spinels, focusing on point defects on each sublattice. We then examine the role that cation disorder has on defect mobility. Using TAD, we find that disorder creates local environments which strongly trap point defects, effectively reducing their mobility. We explore the consequences of this trapping via kinetic Monte Carlo (KMC) simulations on the oxygen vacancy (V O ) in MgGa 2 O 4 , finding that V O mobility is directly related to the degree of inversion in the system

  7. FRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY

    Directory of Open Access Journals (Sweden)

    M. S. Kaiser

    2014-12-01

    Full Text Available The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were also studied using JMAK type analysis to see if there exists any correlation between the methods. Recrystallization fraction behavior between two methods the scandium added alloys show the higher variation due to precipitation hardening and higher recrystallization behavior. The scandium and zirconium as a combined shows the more variation due to formation of Al3(Sc, Zr precipitate. From the microstructure it is also observed that the base Al-Mg alloy attained almost fully re-crystallized state after annealing at 400 °C for 60 minutes

  8. Nicotine chewing gum (2 mg, 4 mg) and cigarette smoking: comparative effects upon vigilance and heart rate.

    Science.gov (United States)

    Parrott, A C; Winder, G

    1989-01-01

    Sixteen male smokers, abstinent the morning before testing, were assessed under four conditions: placebo chewing gum, 2 mg nicotine chewing gum, 4 mg nicotine gum, and cigarette smoking. Placebo gum was administered in the cigarette condition, while sham smoking occurred in the gum conditions. Pre-drug administration and post-drug difference scores were calculated for each assessment measure: rapid visual information processing (RVIP), memory for new information, and heart rate. Nicotine raised heart rate in a significant monotonic dose-related manner (P less than 0.001): placebo +0.2; 2 mg gum +5.1; 4 mg gum +9.8; cigarette +17.5 bpm. Rapid visual information processing target detections were also significantly related to dose (P less than 0.01), with this increased vigilance significant under 4 mg nicotine gum and cigarette smoking. Memory task performance was not significantly affected. Self-reported feelings of alertness/energy were higher while smoking than under placebo or 4 mg gum. Complaints about the taste of the 4 mg nicotine gum were frequent.

  9. Corrosion and Discharge Behaviors of Mg-Al-Zn and Mg-Al-Zn-In Alloys as Anode Materials

    Directory of Open Access Journals (Sweden)

    Jiarun Li

    2016-03-01

    Full Text Available The Mg-6%Al-3%Zn and Mg-6%Al-3%Zn-(1%, 1.5%, 2%In alloys were prepared by melting and casting. Their microstructures were investigated via metallographic and energy-dispersive X-ray spectroscopy (EDS analysis. Moreover, hydrogen evolution and electrochemical tests were carried out in 3.5 wt% NaCl solution aiming at identifying their corrosion mechanisms and discharge behaviors. The results suggested that indium exerts an improvement on both the corrosion rate and the discharge activity of Mg-Al-Zn alloy via the effects of grain refining, β-Mg17Al12 precipitation, dissolving-reprecipitation, and self-peeling. The Mg-6%Al-3%Zn-1.5%In alloy with the highest corrosion rate at free corrosion potential did not perform desirable discharge activity indicating that the barrier effect caused by the β-Mg17Al12 phase would have been enhanced under the conditions of anodic polarization. The Mg-6%Al-3%Zn-1.0%In alloy with a relative low corrosion rate and a high discharge activity is a promising anode material for both cathodic protection and chemical power source applications.

  10. Quality control and stability study of 100 mg/ml paracetamol oral drops

    International Nuclear Information System (INIS)

    Garcia Penna, Caridad M.; Montes de Oca Porto, Yanet; Salomon Izquierdo, Suslebys

    2013-01-01

    Paracetamol is an effective analgesic and antipyretic drug of the non-steroidal anti-inflammatory drug group. Paracetamol oral drops are indicated for use in infant population aged up to 5 years to relieve fever, headache, toothache and symptomatic relief of common cold. To validate two analytical methods for the quality control and the stability study and to study the stability of 100 mg/ml Paracetamol oral drops made in Cuba

  11. Effects of sedation on echocardiographic variables of left atrial and left ventricular function in healthy cats.

    Science.gov (United States)

    Ward, Jessica L; Schober, Karsten E; Fuentes, Virginia Luis; Bonagura, John D

    2012-10-01

    Although sedation is frequently used to facilitate patient compliance in feline echocardiography, the effects of sedative drugs on echocardiographic variables have been poorly documented. This study investigated the effects of two sedation protocols on echocardiographic indices in healthy cats, with special emphasis on the assessment of left atrial size and function, as well as left ventricular diastolic performance. Seven cats underwent echocardiography (transthoracic two-dimensional, spectral Doppler, color flow Doppler and tissue Doppler imaging) before and after sedation with both acepromazine (0.1 mg/kg IM) and butorphanol (0.25 mg/kg IM), or acepromazine (0.1 mg/kg IM), butorphanol (0.25 mg/kg IM) and ketamine (1.5 mg/kg IV). Heart rate increased significantly following acepromazine/butorphanol/ketamine (mean±SD of increase, 40±26 beats/min) and non-invasive systolic blood pressure decreased significantly following acepromazine/butorphanol (mean±SD of decrease, 12±19 mmHg). The majority of echocardiographic variables were not significantly different after sedation compared with baseline values. Both sedation protocols resulted in mildly decreased left ventricular end-diastolic dimension and mildly increased left ventricular end-diastolic wall thickness. This study therefore failed to demonstrate clinically meaningful effects of these sedation protocols on echocardiographic measurements, suggesting that sedation with acepromazine, butorphanol and/or ketamine can be used to facilitate echocardiography in healthy cats.

  12. MgB{sub 2} superconductors for applications

    Energy Technology Data Exchange (ETDEWEB)

    Glowacki, B A; Majoros, M; Eisterer, M; Toenies, S; Weber, H W; Fukutomi, M; Komori, K; Togano, K

    2003-05-01

    The paper presents up to date results on MgB{sub 2} filamentary conductors and coated conductors from the point of view of their possible applications. Basic physical parameters of MgB{sub 2} compound relevant to conductor design are introduced. The correlation between the slope of the irreversibility line, critical temperature and critical current density is discussed with respect to the conductor performance and applicability. The possible origin of the observed anomalous decrease of ac susceptibility at 50 K in copper clad in situ powder-in-tube MgB{sub 2} wires is presented. Some numerical results on critical currents, thermal stability and ac losses of the MgB{sub 2} multifilamentary and coated conductors with magnetic cladding of their filaments are given.

  13. Development of Al-Mg-Li alloys for fusion reactor

    International Nuclear Information System (INIS)

    Shoji, Yoshifusa; Yoshida, Hideo; Uno, Teruo; Baba, Yoshio; Kamada, Koji.

    1985-01-01

    Aluminum-magnesium-lithium alloys featuring low residual induced radioactivity and high electrical resistivity have been developed for fusion reactor structural materials. The addition of lithium in aluminum and Al-Mg alloys markedly increases electrical resistivity and tensile strength of them. However the elongation of Al-Mg-Li alloys containing more than 2 mass% lithium are less than 10 %. The Al-4--5 mass%Mg-1 mass%Li alloys are optimum for fusion reactor materials, and exhibit high resistivity (86 nΩm: 20 %IACS), medium strength (300 MPa) and good formability (22 % elongation). The variation of electrical resistivity of Al-Li and Al-Mg-Li alloys in solid solution can be approximated by the Matthiessen's rule. (author)

  14. $^{31}$Mg $\\beta$-NMR applied in chemistry and biochemistry

    CERN Multimedia

    Magnesium ions, Mg$^{2+}$, are essential in biological systems, taking part in practically all phosphate chemistry, in photosynthesis as an integral component of chlorophyll, and they are regulated via transport through selective membrane proteins. Nonetheless, the function of magnesium ions in biochemistry is difficult to characterize, as it is practically invisible to current experimental techniques. With this proposal we aim to advance the use of $^{31}$Mg $\\beta$-NMR to liquid samples, building on the experience from the successful Letter of Intent INTC-I-088 “$\\beta$-NMR as a novel technique for biological applications”. Initially a series of experiments will be conducted aiming to characterize the coordination chemistry of Mg$^{2+}$ in ionic liquids (ILs), demonstrating that it is possible within the lifetime of the radioisotope to achieve binding of Mg$^{2+}$ to a molecule dissolved in the IL. ILs are chosen as they display a very low vapor pressure, and are thus straightforwardly compatible with t...

  15. Soluble salts addition modifies MgO hydration

    International Nuclear Information System (INIS)

    Santos, A.M.; Pandolfelli, V.C.; Salomao, R.

    2012-01-01

    Magnesium oxide (MgO) show great technological interest on refractories due to its high refractoriness, basic slag corrosion resistance and competitive cost. However, the hydration reaction of MgO produces magnesium hydroxide. This reaction generates a significant volumetric expansion that can lead to material breakdown inhibiting its use in refractory castables. This reaction can be affected by several factors such as magnesia source, purity, calcination temperature, pH, CaO/SiO 2 ratio and agitation speed. In the present work, soluble salts (CaCl 2 and MgCl 2 ) were used in MgO aqueous suspensions (caustic and sinter). The results were evaluated by means of techniques of degree of hydration (termogravimetric), Scanning electron microscopy, apparent volumetric expansion and x-ray Diffraction which showed that the degree of hydration was noticeably less to sinter aqueous and the expansive effects were less with the addition of CaCl 2 . (author)

  16. MgO monolayer epitaxy on Ni (100)

    Science.gov (United States)

    Sarpi, B.; Putero, M.; Hemeryck, A.; Vizzini, S.

    2017-11-01

    The growth of two-dimensional oxide films with accurate control of their structural and electronic properties is considered challenging for engineering nanotechnological applications. We address here the particular case of MgO ultrathin films grown on Ni (100), a system for which neither crystallization nor extended surface ordering has been established previously in the monolayer range. Using Scanning Tunneling Microscopy and Auger Electron Spectroscopy, we report on experiments showing MgO monolayer (ML) epitaxy on a ferromagnetic nickel surface, down to the limit of atomic thickness. Alternate steps of Mg ML deposition, O2 gas exposure, and ultrahigh vacuum thermal treatment enable the production of a textured film of ordered MgO nano-domains. This study could open interesting prospects for controlled epitaxy of ultrathin oxide films with a high magneto-resistance ratio on ferromagnetic substrates, enabling improvement in high-efficiency spintronics and magnetic tunnel junction devices.

  17. The investigation of radiation induced defects in MgO

    International Nuclear Information System (INIS)

    Puetz, M.

    1990-05-01

    In this paper Frenkel defects were induced in MgO by 3 MeV electrons at low temperature. These defects were investigated by measurements of the optical absorption, by investigating the lattice parameters and Huang diffuse scattering. (WL)

  18. Facile fabrication of hydrophobic surfaces on mechanically alloyed-Mg/HA/TiO{sub 2}/MgO bionanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Khalajabadi, Shahrouz Zamani [Medical Devices and Technology Group (MEDITEG), Faculty of Biosciences and Medical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor (Malaysia); Abdul Kadir, Mohammed Rafiq, E-mail: rafiq@biomedical.utm.my [Medical Devices and Technology Group (MEDITEG), Faculty of Biosciences and Medical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor (Malaysia); Izman, Sudin; Mohd Yusop, Mohd Zamri [Department of Materials, Manufacturing and Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor (Malaysia)

    2015-01-01

    Highlights: • Mg/HA/TiO{sub 2}-based nanocomposite was produced using mechanical alloying. • The hydrophobic surface coverage was fabricated on the mechanical alloyed samples by annealing. • The morphological characteristics, phase evolution and wettability of nanocomposites and the hydrophobic surface coverage were investigated. • The activation energies and reaction kinetic of the powder mixture of nanocomposites were calculated. - Abstract: The effect of mechanical alloying and post-annealing on the phase evolution, microstructure, wettability and thermal stability of Mg–HA–TiO{sub 2}–MgO composites was investigated in this study. Phase evolution and microstructure analysis were performed using X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy and atomic force microscopy, as well as the wettability determined by contact angle measurements with SBF. The 16-h mechanical alloying resulted in the formation of MgTiO{sub 3}, CaTiO{sub 3}, Mg{sub 3}(PO{sub 4}){sub 2} and Mg(OH){sub 2} phases and a decrease in wettability of the nanocomposites. A hydrophobic film with hierarchical structures comprising nanoflakes of MgTiO{sub 3}, nano-cuboids of CaTiO{sub 3}, microspheres of Mg{sub 3}(PO{sub 4}){sub 2} and Mg(OH){sub 2} was successfully constructed on the surface of the Mg-based nanocomposites substrates as a result of the post-annealing process. After 1-h annealing at 630 °C, the synthesized hydrophobic surface on the nanocomposite substrates decreased the wettability, as the 8-h-mechanically alloyed samples exhibited a contact angle close to 93°. The formation activation energies and reaction kinetics of the powder mixture were investigated using differential thermal analysis and thermal gravimetric analysis. The released heat, weight loss percentage and reaction kinetics increased, while the formation activation energies of the exothermic reactions decreased following an increase in the milling time.

  19. Pseudopotential approach to superconductivity in MgB2

    International Nuclear Information System (INIS)

    Sharma, K.S.; Bhargava, Nidhi; Jain, Ritu; Goyal, Varsha; Sharma, Ritu; Sharma, Smita

    2010-01-01

    Superconductivity in MgB 2 has been re-examined in BCS-Eliashberg framework by employing Mc-Millan's T c -equation and form factors of MgB 2 computed from the form factors of component metals (Model-I). The empty core model pseudopotential due to Ashcroft and random phase approximation form of dielectric screening due to Gellmann and Brueckner are used in the present work. An excellent agreement between the present values and other theoretically computed values of T c and with the relevant experimental data for MgB 2 confirms the validity of the present approach. The explicit dependence of λ and T c on the isotopic masses of Mg and B, as revealed from the present work, confirms the role of lattice vibrations in the superconducting behaviour of MgB 2 and the high value of T c in it may be attributed to the phonon mediated e-e interaction coupled with higher values of phonon frequencies due to light mass of B atoms. It has also been observed that the pseudo-atom model (Model-II) with appropriate choice of the potential parameter r c successfully explains high value of T c and isotope effect in MgB 2 , confirming the prominent role played by electron-phonon interaction in the high-T c superconductivity observed in MgB 2 . The isotope effect exponent α-values obtained from the two models are in complete agreement with each other and the present value α = 0.46 is also much closer to the BCS value of 0.5. Interaction strength N 0 V values obtained from the two models are also in perfect agreement with each other and the present value N 0 V = 0.48 suggests that MgB 2 is a strong coupling superconductor. (author)

  20. The Abundance of Mg in the Interstellar Medium

    Science.gov (United States)

    Fitzpatrick, Edward L.

    1997-06-01

    An empirical determination of the f-values of the far-UV Mg II λλ1239, 1240 lines is reported. The strong near-UV Mg II λλ2796, 2803 lines are generally highly saturated along most interstellar sight lines outside the local interstellar medium (ISM) and usually yield extremely uncertain estimates of Mg+ column densities in interstellar gas. Since Mg+ is the dominant form of Mg in the neutral ISM, and since Mg is expected to be a significant constituent of interstellar dust grains, the far-UV lines are critical for assessing the role of this important element in the ISM. This study consists of complete component analyses of the absorption along the lines of sight toward HD 93521 in the Galactic halo and ξ Persei and ζ Ophiuchi in the Galactic disk, including all four UV Mg+ lines and numerous other transitions. The three analyses yield consistent determinations of the λλ1239, 1240 f-values, with weighted means of (6.4 +/- 0.4) × 10-4 and (3.2 +/- 0.2) × 10-4, respectively. These results are a factor of ~2.4 larger than a commonly used theoretical estimate, and a factor of ~2 smaller than a recently suggested empirical revision. The effects of this result on gas- and dust-phase abundance measurements of Mg are discussed. Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, under NASA contract NAS5-2655. This Letter is dedicated to the memory of Professor Lyman Spitzer Jr. He was a great guy.

  1. Mg and Sr in Arctic echinoderm calcite: Nature or nurture?

    Science.gov (United States)

    Iglikowska, A.; Borszcz, T.; Drewnik, A.; Grabowska, M.; Humphreys-Williams, E.; Kędra, M.; Krzemińska, M.; Piwoni-Piórewicz, A.; Kukliński, P.

    2018-04-01

    The Mg/Ca and Sr/Ca ratios in echinoderm skeletal calcite are used as a proxy for Phanerozoic seawater changes, since the skeletal concentrations are, to some extent, controlled by environmental factors. However, it remains unclear how the influence of environmental factors is modified by vital effects, especially in polar waters. Therefore, the goal of this study was to compare the ratios of Mg/Ca and Sr/Ca among the skeletal parts of 10 common Arctic echinoderm species belonging to three classes Echinoidea, Asteroidea and Ophiuroidea that contribute substantially to the carbon cycle in the Arctic benthic system. Significant differences were recorded in echinoid skeletal element concentrations among specific skeletal parts. The lowest Mg/Ca and Sr/Ca ratios were detected in the spines (mean Mg/Ca 37.5 ± 8.8 SD; Sr/Ca 1.8 ± 0.1). The components of the Aristotle's lantern (epiphyses, pyramids and rotulas) were characterised by the highest Mg levels (Mg/Ca 79.9 ± 6.0; 75.2 ± 9.1; 60.1 ± 3.8, respectively). It is likely that mouth parts experience greater mechanical pressure compared to other body parts, and the higher content of Mg in the Aristotle's lantern contributes to its robustness. We did not find any distinctive trends in the distribution of skeletal elements in the asteroid and ophiuroid skeletal parts. The heterogeneous concentrations of Mg and Sr in different skeleton parts of the echinoids suggest possible physiological regulation of the chemical composition rather than the composition only being influenced by the environment. We cannot recommend echinoderm skeletons as reliable indicators in palaeoenvironmental reconstructions due to the possible biological control of skeletal chemistry, which may interfere with the effect of environmental variables.

  2. A metastable Mg11Sm phase obtained by rapid solidification

    International Nuclear Information System (INIS)

    Budurov, S.

    1993-01-01

    Molten Mg-Sm alloys with a Sm concentration of 4.93, 6.86, and 8.35 at.% were rapidly soldified with the aid of a shock wave gun device. Investigations of the obtained splats were performed with the aid of DSC, X-ray analysis, and metallography. Rapid soldification of the eutectic MgSm 8.35 alloy forms a new Im3m-type phase. (orig.)

  3. Strength of FePd/MgO and FePt/MgO interfaces from first principles

    Science.gov (United States)

    Černý, M.

    2018-04-01

    Cleavage characteristics such as the cleavage energy and the cleavage stress of FePd/MgO and FePt/MgO interfaces are computed from first principles. Considering several possible cleavage planes, the weakest link in these systems is found as the plane with the lowest cleavage stress. This weakest plane is identified in both systems with the interface plane, where the cohesion is reduced by 30% compared to the MgO bulk. Two distinct models of tensile test are employed to verify the results and convergence of computed values with respect to size of the simulation cell is discussed.

  4. A double-blind study comparing ibuprofen 1800 mg or 2400 mg daily and placebo in sports injuries.

    Science.gov (United States)

    Hutson, M A

    1986-01-01

    In a double-blind, placebo-controlled study of forty-six patients with acute ligamentous damage of the knee, ibuprofen in dosages 1800 mg and 2400 mg produced significant improvements in joint mobility, weight bearing ability and match fitness. Joint effusion, pain on stress and pain severity was significantly improved by all three treatments. Only two patients reported side-effects (one while taking placebo and one taking ibuprofen 2400 mg). The study confirmed the efficacy and excellent tolerance to ibuprofen in patients with sports injuries to the knee.

  5. Effects of aqueous extract of Hibiscus sabdariffa on renal Na(+)-K(+)-ATPase and Ca(2+)-Mg(2+)-ATPase activities in Wistar rats.

    Science.gov (United States)

    Olatunji, Lawrence A; Usman, Taofeek O; Adebayo, Joseph O; Olatunji, Victoria A

    2012-09-01

    To investigate the effects of oral administration of aqueous extract of Hibiscus sabdariffa on renal Na(+)-K(+)-ATPase and Ca(2+)-Mg(2+)-ATPase activities in rats. The 25 and 50 mg/(kg·d) of aqueous extracts of H. sabdariffa were respectively given to rats in the experimental groups for 28 d, and rats in the control group received an appropriate volume of distilled water as vehicle. Na(+)-K(+)-ATPase and Ca(2+)-Mg(2+)-ATPase activities in the kidney were assayed by spectrophotometric method. Administrations of 25 and 50 mg/(kg·d) of aqueous extract of H. sabdariffa significantly decreased the Ca(2+)-Mg(2+)-ATPase activity in the kidney of rats (Psabdariffa may preserve the renal function despite a decreased renal Ca(2+)-Mg(2+)-ATPase activity.

  6. Efficacy and safety of tamsulosin 0.4 mg single pills for treatment of Asian patients with symptomatic benign prostatic hyperplasia with lower urinary tract symptoms: a randomized, double-blind, phase 3 trial.

    Science.gov (United States)

    Chung, Jae Hoon; Oh, Cheol Young; Kim, Jae Heon; Ha, U-Syn; Kim, Tae Hyo; Lee, Seung Hwan; Han, Jun Hyun; Bae, Jae Hyun; Chang, In Ho; Han, Deok Hyun; Yoo, Tag Keun; Chung, Jae Il; Kim, Sae Woong; Jung, Jina; Kim, Yong-Il; Lee, Seung Wook

    2018-04-12

    To verify the efficacy and safety of tamsulosin 0.4 mg and tamsulosin 0.2 mg compared with those of placebo in patients with lower urinary tract symptoms (LUTS) associated with benign prostatic hyperplasia (BPH). A total of 494 patients from multiple centers participated in this double-blind, randomized, phase 3 trial. Eligible patients were randomly assigned to the tamsulosin 0.4 mg group, tamsulosin 0.2 mg group or placebo group. The International Prostate Symptom Score (IPSS), maximum flow rate (Qmax), post-void residual (PVR) urine volume, blood pressure, heart rate and adverse events were compared among the three groups at 4, 8 and 12 weeks. A total of 494 BPH patients were analyzed. There were no differences in the baseline characteristics among the three groups. After 12 weeks of treatment, total IPSS was improved in the 0.2 mg and 0.4 mg tamsulosin groups; however, the extent of improvement was greater in the 0.4 mg group than in the 0.2 mg group (0.4 mg: -9.59 vs. 0.2 mg: -5.61; least-squares mean difference [95% confidence interval]: -3.95 [-5.01, -2.89], p Tamsulosin 0.4 mg and 0.2 mg appear to be superior to placebo treatment, and tamsulosin 0.4 mg is more effective than 0.2 mg in terms of total IPSS improvement. Tamsulosin 0.4 mg has favorable efficacy and tolerability in Asian men with symptomatic BPH. ClinicalTrials.gov Identifier: NCT02390882.

  7. Hydrogen incorporation in high hole density GaN:Mg

    Science.gov (United States)

    Zvanut, M. E.; Uprety, Y.; Dashdorj, J.; Moseley, M.; Doolittle, W. Alan

    2011-03-01

    We investigate hydrogen passivation in heavily doped p-type GaN using electron paramagnetic resonance (EPR) spectroscopy. Samples include both conventionally grown GaN (1019 cm-3 Mg, 1017 cm-3 holes) and films grown by metal modulation epitaxy (MME), which yielded higher Mg (1- 4 x 1020 cm-3) and hole (1- 40 x 1018 cm-3) densities than found in conventionally grown GaN. The Mg acceptor signal is monitored throughout 30 minute annealing steps in N2 :H2 (92%:7%)) and subsequently pure N2 . N2 :H2 heat treatments of the lower hole density films begin to reduce the Mg EPR intensity at 750 o C, but quench the signal in high hole density films at 600 o C. Revival of the signal by subsequent N2 annealing occurs at 800 o C for the low hole density material and 600 o C in MME GaN. The present work highlights chemical differences between heavily Mg doped and lower doped films; however, it is unclear whether the difference is due to changes in hydrogen-Mg complex formation or hydrogen diffusion. The work at UAB is supported by the NSF.

  8. In vitro degradation of pure Mg in response to glucose

    Science.gov (United States)

    Zeng, Rong-Chang; Li, Xiao-Ting; Li, Shuo-Qi; Zhang, Fen; Han, En-Hou

    2015-08-01

    Magnesium and its alloys are promising biodegradable biomaterials but are still challenging to be used in person with high levels of blood glucose or diabetes. To date, the influence of glucose on magnesium degradation has not yet been elucidated, this issue requires more attention. Herein, we present pure Mg exhibiting different corrosion responses to saline and Hank’s solutions with different glucose contents, and the degradation mechanism of pure Mg in the saline solution with glucose in comparison with mannitol as a control. On one hand, the corrosion rate of pure Mg increases with the glucose concentration in saline solutions. Glucose rapidly transforms into gluconic acid, which attacks the oxides of the metal and decreases the pH of the solution; it also promotes the absorption of chloride ions on the Mg surface and consequently accelerates corrosion. On the other hand, better corrosion resistance is obtained with increasing glucose content in Hank’s solution due to the fact that glucose coordinates Ca2+ ions in Hank’s solution and thus improves the formation of Ca-P compounds on the pure Mg surface. This finding will open up new avenues for research on the biodegradation of bio-Mg materials in general, which could yield many new and interesting results.

  9. Behavior of lambda 2800 Mg II in stellar spectra

    International Nuclear Information System (INIS)

    Gurzadyan, G.A.

    1975-01-01

    The results of measurements of the equivalent widths of the resonance doublet of ionized magnesium lambda 2800 Mg II in the spectra of 51 relatively faint stars, up to 10/sup m/, of the spectral classes B1-K5 are presented. The observed material has been obtained by means of the space observatory ''Orion-2''. Some regularities in the behavior of lambda 2800 Mg II in stellar spectra have been revealed: wide and deep depression of the continuous spectra at 2800 A in F-G type stars; the presence of the doublet lambda 2800 Mg II in the form of weak emission in the spectra of cold stars (K2-K5); the presence both of the multiplet lambda 3080 Ti II and the doublet lambda 2800 Mg II simultaneously either in emission--in the late-type stars--or in absorption in earlier types; the existence of combined profiles of lambda 2800 Mg II, i.e., a wide absorption line with a weak emission in the center, in stars of the transitional class (G5-K0), etc. A well-defined empirical relationship between the equivalent width of lambda 2800 Mg II and the spectral class of the star has been established (Fig. 8). (U.S.)

  10. A new class of ultra-hard materials based on AlMgB14

    International Nuclear Information System (INIS)

    Cook, B.A.; Harringa, J.L.; Lewis, T.L.; Russell, A.M.

    2000-01-01

    In this study, aluminum magnesium boride combined with 5 to 30 mol.% additives (AlMgB 14 :X where X = Si, P, C, AlN, TiB 2 , or BN), were prepared by mechanical alloying and consolidated by vacuum hot pressing. Matkovich and Economy first reported the orthorhombic AlMgB 14 intermetallic compound (oI64, space group Imam, a - 0.5848 nm, b = 0.8112 nm, c = 1.0312 nm), and the structure determination was later refined by Higashi and Ito. The unit cell is based on four B 12 icosahedral units centered at (0, 0, 0), (0, 0.5, 0.5), (0.5, 0, 0), and (0.5, 0.5, 0.5) within the unit cell. The remaining eight B atoms lie outside the icosahedra, bonding to the icosahedral B atoms and to the Al and Mg atoms. The Al atoms occupy a four-fold position at (0.250, 0.750, 0.250), and the Mg atoms occupy a four-fold position at (0.250, 0.359, 0). The icosahedra are arranged in distorted, close-packed layers. The unique electronic, optical, and mechanical properties of this material are due to a complex icosahedra (intericosahedral bonding). The highest hardness was observed in the AlMgB 14 + 30%TiB 2 material, which possesses a multi-phase microstructure. Here again, an increase in hardness accompanying the introduction of additional phases is somewhat surprising and difficult to explain. The possible compounds that may form at the AlMgB 14 -TiB 2 interface during hot pressing are numerous

  11. An Evaluation of Theraphy with Fluconazole 150 mg Tablets Compared to Fluconazole 150 mg Tablets Plus Dermoxen Lenitiva Cream in The Time to Reduce Simptomatology in Women with Vulvovaginal Candidiasis

    Directory of Open Access Journals (Sweden)

    Davide Carati

    2014-06-01

    Full Text Available Aim of the study. Authors investigated first of all the time to onset of first relief of symptoms. Secondary measures included the time to overall relief of symptoms and the reoccurrence rate over the first 45 days after the first visit. Methods. A randomized, open-label, parallel study evaluated 47 women with moderate to severe symptoms of Vulvo Vaginal Candidiasis (VVC. Patients were divided into two groups of treatment: group 1 followed a therapy with Fluconazole 150 mg tablets, while group 2 had a therapy based on Fluconazole 150 mg tablets coadjuvated by Dermoxen Lenitiva cream. Results. The time at which 50% of patients experienced first relief of symptoms was 24.6 hours for Group 1, while for Group 2 it was 12.4 hours (P<0.05. There were significant differences between the two groups in respect to the time of first relief of symptoms and reoccurrence of infection within 45 days of treatment. Conclusions. Combined treatment with Fluconazole 150 mg tablets and by Dermoxen Lenitiva cream provides statistically significant improvement in the time of first relief of symptoms, complete relief of symptoms and relapse time in the treatment of VVC compared to fluconazole 150 mg tablets only.

  12. Competition Between Co(NH3)63+ and Inner Sphere Mg2+ Ions in the HDV Ribozyme

    Science.gov (United States)

    Gong, Bo; Chen, Jui-Hui; Bevilacqua, Philip C.; Golden, Barbara L.; Carey, Paul R.

    2009-01-01

    Divalent cations play critical structural and functional roles in many RNAs. While the hepatitis delta virus (HDV) ribozyme can undergo self-cleavage in the presence of molar concentrations of monovalent cations, divalent cations such as Mg2+ are required for efficient catalysis under physiological conditions. Moreover, the cleavage reaction can be inhibited with Co(NH3)63+, an analog of Mg(H2O)62+. Here, the binding of Mg2+ and Co(NH3)63+ to the HDV ribozyme are studied by Raman microscopic analysis of crystals. Raman difference spectra acquired at different metal ion conditions reveal changes in the ribozyme. When Mg2+ alone is introduced to the ribozyme, inner sphere coordination of Mg(H2O)x2+ (x≤5) to non-bridging PO2− oxygen, and changes in base stretches and phosphodiester group conformation are observed. In addition, binding of Mg2+ induces deprotonation of a cytosine assigned to the general acid C75, consistent with solution studies. When Co(NH3)63+ alone is introduced, deprotonation of C75 is again observed, as are distinctive changes in base vibrational ring modes and phosphodiester backbone conformation. In contrast to Mg2+ binding, Co(NH3)63+ binding does not perturb PO2− group vibrations, consistent with its ability to make only outer sphere contacts. Surprisingly, competitive binding studies reveal that Co(NH3)63+ ions displace some inner sphere-coordinated magnesium species, including ions coordinated to PO2− groups or the N7 of a guanine, likely G1 at the active site. These observations contrast with the tenet that Co(NH3)63+ ions displace only outer sphere magnesium ions. Overall, our data support two classes of inner sphere Mg2+-PO2− binding sites: sites that Co(NH3)63+ can displace, and others it cannot. PMID:19888753

  13. Group Work: How to Use Groups Effectively

    Science.gov (United States)

    Burke, Alison

    2011-01-01

    Many students cringe and groan when told that they will need to work in a group. However, group work has been found to be good for students and good for teachers. Employers want college graduates to have developed teamwork skills. Additionally, students who participate in collaborative learning get better grades, are more satisfied with their…

  14. MgB2 and Mg1-xAlxB2 single crystals: high pressure growth and physical properties

    International Nuclear Information System (INIS)

    Karpinski, J.; Kazakov, S.M.; Jun, J.; Zhigadlo, N.D.; Angst, M.; Puzniak, R.; Wisniewski, A.

    2004-01-01

    Single crystals of MgB 2 have been grown with a high pressure cubic anvil technique. They grow via the peritectic decomposition of the MgNB 9 ternary nitride. The crystals are of a size up to 2 x 1 x 0.1 mm 3 with a weight up to 230 μg. Typically they have transition temperatures between 38 and 38.6 K with a width of 0.3-0.5 K. Investigations of the P-T phase diagram prove that the MgB 2 phase is stable at least up to 2190 deg. C at high hydrostatic pressure in the presence of Mg vapor under high pressure. Substitution of aluminum for magnesium in single crystals leads to stepwise decrease of T c . This indicates a possible appearance of superstructures or phases with different T c 's. The upper critical field decreases with Al doping

  15. First-principles study of the (0001)-MgB2 surface finished in Mg and B

    International Nuclear Information System (INIS)

    Segura, Sully; Martínez, Jairo Arbey Rodríguez; Moreno-Armenta, María Guadalupe

    2014-01-01

    We present a study based on Density Functional Theory (DFT) of the volume and two surfaces (0001) of MgB 2 , one of them terminated in Mg and the other one terminated in B. Each one of the surface was relaxed and their electronic properties were determined. From calculation of the enthalpy of formation we found that the Mg-terminated surface is energetically favored. The bands seem to present a formation similar to the Dirac's cone as that are presented in graphene, but in MgB 2 is above of the Fermi level. In the three cases, volume and the two surfaces, the behaviour is boron-metallic, because there are strong presence of B orbital's in the neighborhood of the Ferm level

  16. Free Boolean Topological Groups

    Directory of Open Access Journals (Sweden)

    Ol’ga Sipacheva

    2015-11-01

    Full Text Available Known and new results on free Boolean topological groups are collected. An account of the properties that these groups share with free or free Abelian topological groups and properties specific to free Boolean groups is given. Special emphasis is placed on the application of set-theoretic methods to the study of Boolean topological groups.

  17. Small Group Research

    Science.gov (United States)

    McGrath, Joseph E.

    1978-01-01

    Summarizes research on small group processes by giving a comprehensive account of the types of variables primarily studied in the laboratory. These include group structure, group composition, group size, and group relations. Considers effects of power, leadership, conformity to social norms, and role relationships. (Author/AV)

  18. Density functional theory (DFT) study on the hydrolysis behavior of degradable Mg/Mg alloys for biomedical applications

    Science.gov (United States)

    Nezafati, Marjan

    Magnesium-based (Mg and/or Mg alloys) materials possess many advantageous physicochemical/biological characteristics such as good biocompatibility and similarity of the mechanical properties to the human bone tissue, which renders this material a promising candidate for the biomedical and implant applications. One of the most attractive features of Mg-based materials is the degradability in the physiological environment. With the burst of research on the biodegradable materials for the healthcare device applications, Mg and its alloys attracted a strong attention in the bioengineering field in recent years. However, the major limitation of applying Mg-based materials to biomedical applications is the fast degradation/corrosion rate with regards to the healing process time-span. In the present thesis, an atomistic model employing the density-functional theory (DFT) has been developed to study the hydrolysis process by understanding the influences of commonly used alloying elements (zinc (Zn), calcium (Ca), aluminum (Al), and yttrium (Y)) and the crystallographic orientation of the dissolution surfaces (basal (0001), prism (1010), and pyramidal (1011) planes) on the corrosion behavior. These parameters are known to strongly impact the initial hydrolysis phenomena of Mg-based materials. To develop the atomistic computational model, we have implemented the Dmol3 software package in conjunction with PBE (Perdew, Burke and Ernzerhof) correlation energy functional in the GGA (generalized gradient approximation) scheme. Throughout the thesis, we performed three sets of calculations, i) surface energy, ii) dissolution potential, and iii) water adsorption computations, to examine the hydrolysis mechanism and the subsequent corrosion/degradation of Mg/Mg alloys. The total energy changes of various Mg-based systems in different conditions for these surface energies, dissolution behavior, and tendency of the system for adsorbing the water molecule were quantified. The results

  19. Catalytic mechanism of the dehydrogenation of ethylbenzene over Fe–Co/Mg(Al)O derived from hydrotalcites

    KAUST Repository

    Tope, Balkrishna B.

    2011-11-01

    Catalytic mechanism of ethylbenzene dehydrogenation over Fe-Co/Mg(Al)O derived from hydrotalcites has been studied based on the XAFS and XPS catalyst characterization and the FTIR measurements of adsorbed species. Fe-Co/Mg(Al)O showed synergy, whereas Fe-Ni/Mg(Al)O showed no synergy, in the dehydrogenation of ethylbenzene. Ni species were stably incorporated as Ni2+ in the regular sites in periclase and spinel structure in the Fe-Ni/Mg(Al)O. Contrarily, Co species exists as a mixture of Co3+/Co2+ in the Fe-Co/Mg(Al)O and was partially isolated from the regular sites in the structures with increasing the Co content. Co addition enhanced Lewis acidity of Fe3+ active sites by forming Fe3+-O-Co 3+/2+(1/1) bond, resulting in an increase in the activity. FTIR of ethylbenzene adsorbed on the Fe-Co/Mg(Al)O clearly showed formations of C-O bond and π-adsorbed aromatic ring. This suggests that ethylbenzene was strongly adsorbed on the Fe3+ acid sites via π-bonding and the dehydrogenation was initiated by α-H+ abstraction from ethyl group on Mg2+-O2- basic sites, followed by C-O-Mg bond formation. The α-H+ abstraction by O2-(-Mg 2+) was likely followed by β-H abstraction, leading to the formations of styrene and H2. Such catalytic mechanism by the Fe 3+ acid-O2-(-Mg2+) base couple and the Fe 3+/Fe2+ reduction-oxidation cycle was further assisted by Co3+/Co2+, leading to a good catalytic activity for the dehydrogenation of ethylbenzene. © 2011 Elsevier B.V. All rights reserved.

  20. Phototransfered thermoluminescence for dose reassessment in LiF:mg,ti , LiF: mg,Cu,p TL detectors

    International Nuclear Information System (INIS)

    Rodriguez Otazo, M.; Baly, L.

    2001-01-01

    Phototransfered Thermoluminescence (PTTL) from LiF:Mg,Ti (TLD-100) and LiF: Mg,Cu,P (GR-200) was studied at different conditions using different sources of UV light for dose reassessment purposes. The TL dosimeters were irradiated with 137Cs in the range 2 mGy to 100 mGy. The convenience of using PTTL for dose reassessment was analyzed

  1. Corrosion inhibition of powder metallurgy Mg by fluoride treatments.

    Science.gov (United States)

    Pereda, M D; Alonso, C; Burgos-Asperilla, L; del Valle, J A; Ruano, O A; Perez, P; Fernández Lorenzo de Mele, M A

    2010-05-01

    Pure Mg has been proposed as a potential degradable biomaterial to avoid both the disadvantages of non-degradable internal fixation implants and the use of alloying elements that may be toxic. However, it shows excessively high corrosion rate and insufficient yield strength. The effects of reinforcing Mg by a powder metallurgy (PM) route and the application of biocompatible corrosion inhibitors (immersion in 0.1 and 1M KF solution treatments, 0.1M FST and 1M FST, respectively) were analyzed in order to improve Mg mechanical and corrosion resistance, respectively. Open circuit potential measurements, polarization techniques (PT), scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy (EIS) were performed to evaluate its corrosion behavior. SECM showed that the local current of attacked areas decreased during the F(-) treatments. The corrosion inhibitory action of 0.1M FST and 1M FST in phosphate buffered solution was assessed by PT and EIS. Under the experimental conditions assayed, 0.1M FST revealed better performance. X-ray photoelectron spectroscopy, energy dispersive X-ray and X-ray diffraction analyses of Mg(PM) with 0.1M FST showed the presence of KMgF(3) crystals on the surface while a MgF(2) film was detected for 1M FST. After fluoride inhibition treatments, promising results were observed for Mg(PM) as degradable metallic biomaterial due to its higher yield strength and lower initial corrosion rate than untreated Mg, as well as a progressive loss of the protective characteristics of the F(-)-containing film which ensures the gradual degradation process. Copyright (c) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  2. Corrosion behaviour of Mg-Cu and Mg-Mo composites in 3.5% NaCl

    International Nuclear Information System (INIS)

    Budruk Abhijeet, S.; Balasubramaniam, R.; Gupta, M.

    2008-01-01

    The corrosion behaviour of pure magnesium, Mg-Cu (0.3, 0.6, and 1 vol.%) and Mg-Mo (0.1, 0.3, and 0.6 vol.%) composites has been studied in 3.5% NaCl solution by weight loss and polarisation methods. Corrosion rates determined by weight loss method were considerably higher than that determined by polarisation method. The corrosion rate increased with increasing volume fraction of reinforcement in Mg-Cu and Mg-Mo composites. At the same volume fraction of reinforcement, molybdenum reinforced composite corroded faster than copper reinforced composite. The galvanic current density between Mg-Cu and Mg-Mo couples has been experimentally measured using zero resistance ammeter technique. The experimentally observed galvanic current densities were in close agreement with those obtained using mixed potential theory analysis. SEM observation of corroded samples confirmed microgalvanic activity at the matrix/reinforcement interfaces. The poor corrosion resistance of composites has been attributed to microgalvanic effects between the matrix and reinforcements and inferior quality of surface films

  3. Experimental investigation and thermodynamic calculation of the Fe-Mg-Mn and Fe-Mg-Ni systems

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Peisheng; Zhao, Jingrui; Xu, Honghui; Liu, Shuhong; Ouyang, Hongwu [Central South Univ., Hunan (China). State Key Lab. of Powder Metallurgy; Du, Yong [Central South Univ., Hunan (China). State Key Lab. of Powder Metallurgy; Harbin Institute of Technology (China). State Key Lab. of Advanced Welding Production Technology; Gang, Tie; Fen, Jicai [Harbin Institute of Technology (China). State Key Lab. of Advanced Welding Production Technology; Zhang, Lijun [Central South Univ., Hunan (China). State Key Lab. of Powder Metallurgy; Bochum Univ. (Germany). ICAMS Inst.; He, Cuiyun [Guangxi Univ. (China). College of Physical Science and Technology

    2011-01-15

    Based on the thermodynamic calculations extrapolated from the corresponding binary sub-systems, four decisive alloys in the Fe-Mg-Mn system and three in the Fe-Mg-Ni system were selected and prepared using a powder metallurgy method to measure the isothermal sections at 500 C in both systems. The prepared samples were annealed at 500 C, and then subjected to X-ray diffraction, optical microscopy, scanning electron microscopy with energy-dispersive X-ray spectrometry as well as electron probe microanalysis. Taking into account the presently obtained experimental data and the experimental data available in the literature, thermodynamic modeling was performed for the above systems. It was found that a direct extrapolation from the corresponding three binary systems can well reproduce all the experimental data in the Fe-Mg-Mn system, while two thermodynamic parameters are needed in the Fe-Mg-Ni system to fit all the experimental data. The liquidus projections and reaction schemes for the Fe-Mg-Mn and Fe-Mg-Ni systems are also presented. (orig.)

  4. Comparison of effects of ATP-MgCl2 and adenosine-MgCl2 on renal function following ischemia

    International Nuclear Information System (INIS)

    Sumpio, B.E.; Hull, M.J.; Baue, A.E.; Chaudry, I.H.

    1987-01-01

    ATO-MgCl 2 administration had been shown to accelerate the recovery of renal function following warm ischemia. However, since the major breakdown product of ATP is adenosine, the relative contribution of ATP vs. adenosine in improving renal function following ischemia remains to be determined. To study this, kidneys were subjected to 45 min of normothermic ischemia and then perfused at 100 mmHg with oxygenated Krebs-HCO 3 buffer containing albumin, [ 3 H]inulin, substrates, and either 0.3 mM ATP-MgCl 2 or adenosine-MgCl 2 for 110 min. Perfusate and timed urine samples were collected and analyzed for radioactivity and [Na + ]. The functional parameters indicated that although adenosine-MgCl 2 treatment provided a transient improvement, it failed to provided a sustained improvement in renal function or attain control valued compared with ATP-MgCl 2 treatment. Thus, the salutary effects of ATP-MgCl 2 following warm ischemia in the kidney are not mediated by adenosine

  5. Influences of the quantity of Mg2Sn phase on the corrosion behavior of Mg-7Sn magnesium alloy

    International Nuclear Information System (INIS)

    Liu Xianbin; Shan Dayong; Song Yingwei; Chen Rongshi; Han Enhou

    2011-01-01

    The influence of the quantity of the Mg 2 Sn phase on the corrosion behavior of different solution temperature treated Mg-7Sn magnesium alloy has been investigated by electrochemical measurements, scanning electron microscope (SEM) observation, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. With the increase of solution temperature, the quantity of Mg 2 Sn phase decreased and the tin concentration of matrix increased. The dissolved tin in Mg matrix took part in the film formation and the constituent of film was magnesium oxide and stannic oxide. The corrosion mode and corrosion rate were associated with the quantity of Mg 2 Sn phases and tin concentration of the matrix. If most of tin was present as Mg 2 Sn, the corrosion mode was pitting corrosion and it accelerated the corrosion rate. If most of tin was dissolved in matrix, the corrosion mode was filiform corrosion and it decreased the corrosion rate. The experiment evidences demonstrated that the corrosion resistance can be improved by increasing the tin concentration of matrix and the lowest corrosion rate was observed for sample solution treated at 540 o C.

  6. Formation of Al3Ti/Mg composite by powder metallurgy of Mg-Al-Ti system.

    Science.gov (United States)

    Yang, Zi R; Qi Wang, Shu; Cui, Xiang H; Zhao, Yu T; Gao, Ming J; Wei, Min X

    2008-07-01

    An in situ titanium trialuminide (Al 3 Ti)-particle-reinforced magnesium matrix composite has been successfully fabricated by the powder metallurgy of a Mg-Al-Ti system. The reaction processes and formation mechanism for synthesizing the composite were studied by differential scanning calorimetry (DSC), x-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). Al 3 Ti particles are found to be synthesized in situ in the Mg alloy matrix. During the reaction sintering of the Mg-Al-Ti system, Al 3 Ti particles are formed through the reaction of liquid Al with as-dissolved Ti around the Ti particles. The formed intermetallic particles accumulate at the original sites of the Ti particles. As sintering time increases, the accumulated intermetallic particles disperse and reach a relatively homogeneous distribution in the matrix. It is found that the reaction process of the Mg-Al-Ti system is almost the same as that of the Al-Ti system. Mg also acts as a catalytic agent and a diluent in the reactions and shifts the reactions of Al and Ti to lower temperatures. An additional amount of Al is required for eliminating residual Ti and solid-solution strengthening of the Mg matrix.

  7. Pitavastatin 4 mg Provides Significantly Greater Reduction in Remnant Lipoprotein Cholesterol Compared With Pravastatin 40 mg: Results from the Short-term Phase IV PREVAIL US Trial in Patients With Primary Hyperlipidemia or Mixed Dyslipidemia.

    Science.gov (United States)

    Miller, P Elliott; Martin, Seth S; Joshi, Parag H; Jones, Steven R; Massaro, Joseph M; D'Agostino, Ralph B; Sponseller, Craig A; Toth, Peter P

    2016-03-01

    Remnants are partially hydrolyzed, triglyceride-rich lipoproteins that are implicated in atherosclerosis. We assessed the adequacy of pitavastatin 4 mg and pravastatin 40 mg in reducing atherogenic lipid parameters beyond LDL-C, in particular remnant lipoprotein cholesterol (RLP-C). From the Phase IV, multicenter, randomized, double-blind PREVAIL US (A Study of Pitavastatin 4 mg Vs. Pravastatin 40 mg in Patients With Primary Hyperlipidemia or Mixed Dyslipidemia) trial, we examined lipoprotein cholesterol subfractions using Vertical Auto Profile testing and apolipoproteins B and A-I at baseline and 12 weeks. Participants with primary hyperlipidemia or mixed dyslipidemia had LDL-C levels of 130 to 220 mg/dL and triglyceride levels ≤ 400 mg/dL. In this post hoc analysis, changes in lipid parameters were compared by using ANCOVA. Lipoprotein subfraction data were available in 312 patients (pitavastatin, n = 157; pravastatin, n = 155). Pitavastatin promoted a greater reduction in RLP-C than pravastatin (-13.6 [8.7] vs -9.3 [9.5] mg/dL). Furthermore, the pitavastatin group reported greater reductions in both components of RLP-C (both, P < 0.001): intermediate-density lipoprotein cholesterol (-9.5 [6.3] vs -6.4 [6.6] mg/dL) and very low-density lipoprotein cholesterol subfraction 3 (-4.1 [3.5] vs -2.9 [3.8] mg/dL). There were also greater reductions in the major ratios of risk (apolipoprotein B/apolipoprotein A-I and total cholesterol/HDL-C) (both, P < 0.001). There were no significant changes in HDL-C, its subfractions, or natural log lipoprotein(a)-cholesterol. The mean age was 58.8 ± 8.9 years in the pitavastatin group and 57.0 ± 10.2 years in the pravastatin group. Compared with pravastatin 40 mg daily, pitavastatin 4 mg provided superior reductions in atherogenic lipid parameters beyond LDL-C, including RLP-C. Future studies are needed investigate the clinical implications of lowering directly measured RLP-C as the principal target. ClinicalTrials.gov identifier

  8. Geometric group theory

    CERN Document Server

    Druţu, Cornelia

    2018-01-01

    The key idea in geometric group theory is to study infinite groups by endowing them with a metric and treating them as geometric spaces. This applies to many groups naturally appearing in topology, geometry, and algebra, such as fundamental groups of manifolds, groups of matrices with integer coefficients, etc. The primary focus of this book is to cover the foundations of geometric group theory, including coarse topology, ultralimits and asymptotic cones, hyperbolic groups, isoperimetric inequalities, growth of groups, amenability, Kazhdan's Property (T) and the Haagerup property, as well as their characterizations in terms of group actions on median spaces and spaces with walls. The book contains proofs of several fundamental results of geometric group theory, such as Gromov's theorem on groups of polynomial growth, Tits's alternative, Stallings's theorem on ends of groups, Dunwoody's accessibility theorem, the Mostow Rigidity Theorem, and quasiisometric rigidity theorems of Tukia and Schwartz. This is the f...

  9. Profinite graphs and groups

    CERN Document Server

    Ribes, Luis

    2017-01-01

    This book offers a detailed introduction to graph theoretic methods in profinite groups and applications to abstract groups. It is the first to provide a comprehensive treatment of the subject. The author begins by carefully developing relevant notions in topology, profinite groups and homology, including free products of profinite groups, cohomological methods in profinite groups, and fixed points of automorphisms of free pro-p groups. The final part of the book is dedicated to applications of the profinite theory to abstract groups, with sections on finitely generated subgroups of free groups, separability conditions in free and amalgamated products, and algorithms in free groups and finite monoids. Profinite Graphs and Groups will appeal to students and researchers interested in profinite groups, geometric group theory, graphs and connections with the theory of formal languages. A complete reference on the subject, the book includes historical and bibliographical notes as well as a discussion of open quest...

  10. Capturing the H 2 –Metal Interaction in Mg-MOF-74 Using Classical Polarization

    KAUST Repository

    Pham, Tony; Forrest, Katherine A.; McLaughlin, Keith; Eckert, Juergen; Space, Brian

    2014-01-01

    © 2014 American Chemical Society. Grand canonical Monte Carlo (GCMC) simulations of H2 sorption were performed in Mg-MOF-74, a metal-organic framework (MOF) that displays very high H2 sorption affinity. Experimental H2 sorption isotherms and isosteric heats of adsorption (Qst) values were reproduced using a general purpose materials sorption potential that includes many-body polarization interactions. In contrast, using two models that include only charge-quadrupole interactions failed to reproduce such experimental measurements even though they are the type normally employed in such classical force field calculations. Utilizing the present explicit polarizable model in GCMC simulation resulted in a Mg2+-H2 distance of 2.60 Å, which is close to a previously reported value that was obtained using electronic structure methods and comparable to similar experimental measurements. The induced dipole distribution obtained from simulation assisted in the characterization of two previously identified sorption sites in the MOF: the Mg2+ ions and the oxido group of the linkers. The calculated two-dimensional quantum rotational levels for a H2 molecule sorbed onto the Mg2+ ion were in good agreement with experimental inelastic neutron scattering (INS) data. Although the H2-metal interaction in MOFs may be thought of as a quantum mechanical effect, this study demonstrates how the interaction between the sorbate molecules and the open-metal sites in a particular highly sorbing MOF can be captured using classical simulation techniques that involve a polarizable potential.

  11. Isostructural and heterostructural MgZnO and CdZnO alloys

    Energy Technology Data Exchange (ETDEWEB)

    Schleife, Andre; Roedl, Claudia; Bechstedt, Friedhelm [Institut fuer Festkoerpertheorie und -optik and European Theoretical Spectroscopy Facility, Friedrich-Schiller-Universitaet Jena, 07743 Jena (Germany)

    2011-07-01

    One important goal of materials design is to purposefully tailor the fundamental band gap. Recently, group-II oxides such as MgO, ZnO, and CdO are discussed to possibly supersede the nitrides for certain applications, e.g. in optoelectronics. Since the band gaps of the oxides cover a large spectral range from 1.8 eV (CdO) up to 7.7 eV (MgO), their alloys seem to be promising - unless the different equilibrium crystal structures of the end components (rocksalt-MgO and -CdO vs. wurtzite-ZnO) prevent their application. By employing three different cluster statistics within a cluster-expansion approach we investigate the impact of different growth conditions on the composition of isostructural and heterostructural Mg{sub x}Zn{sub 1-x}O and Cd{sub x}Zn{sub 1-x}O alloys. Our total-energy calculations are based on density-functional theory using a generalized-gradient approximation for exchange and correlation. We also compute quasiparticle energies using the HSE03+G{sub 0}W{sub 0} approach. This allows us to derive the bowings of fundamental band gaps, which reveal a strongly nonlinear behavior. Using the solution of the Bethe-Salpeter equation for the optical polarization function we investigate the influence of the preparation conditions on the peaks related to bound excitonic states at the absorption edge.

  12. Capturing the H 2 –Metal Interaction in Mg-MOF-74 Using Classical Polarization

    KAUST Repository

    Pham, Tony

    2014-10-02

    © 2014 American Chemical Society. Grand canonical Monte Carlo (GCMC) simulations of H2 sorption were performed in Mg-MOF-74, a metal-organic framework (MOF) that displays very high H2 sorption affinity. Experimental H2 sorption isotherms and isosteric heats of adsorption (Qst) values were reproduced using a general purpose materials sorption potential that includes many-body polarization interactions. In contrast, using two models that include only charge-quadrupole interactions failed to reproduce such experimental measurements even though they are the type normally employed in such classical force field calculations. Utilizing the present explicit polarizable model in GCMC simulation resulted in a Mg2+-H2 distance of 2.60 Å, which is close to a previously reported value that was obtained using electronic structure methods and comparable to similar experimental measurements. The induced dipole distribution obtained from simulation assisted in the characterization of two previously identified sorption sites in the MOF: the Mg2+ ions and the oxido group of the linkers. The calculated two-dimensional quantum rotational levels for a H2 molecule sorbed onto the Mg2+ ion were in good agreement with experimental inelastic neutron scattering (INS) data. Although the H2-metal interaction in MOFs may be thought of as a quantum mechanical effect, this study demonstrates how the interaction between the sorbate molecules and the open-metal sites in a particular highly sorbing MOF can be captured using classical simulation techniques that involve a polarizable potential.

  13. Structural Phase Transitions of Mg(BH4)2 under Pressure

    International Nuclear Information System (INIS)

    George, L.; Drozd, V.; Saxena, S.; Bardaji, E.; Fichtner, M.

    2009-01-01

    The structural stability of Mg(BH4)2, a promising hydrogen storage material, under pressure has been investigated in a diamond anvil cell up to 22 GPa with combined synchrotron X-ray diffraction and Raman spectroscopy. The analyses show a structural phase transition around 2.5 GPa and again around 14.4 GPa. An ambient-pressure phase of Mg(BH4)2 has a hexagonal structure (space group P61, a = 10.047(3) A, c = 36.34(1) A, and V = 3176(1) A3 at 0.2 GPa), which agrees well with early reports. The structure of high-pressure phase is found to be different from reported theoretical predictions; it also does not match the high-temperature phase. The high-pressure polymorph of Mg(BH4)2 is found to be stable on decompression, similar to the case of the high-temperature phase. Raman spectroscopic study shows a similarity in high-pressure behavior of as-prepared Mg(BH4)2 and its high-temperature phase.

  14. Catalytic effect of Ni, Mg2Ni and Mg2NiH4 upon hydrogen desorption from MgH2

    Czech Academy of Sciences Publication Activity Database

    Čermák, Jiří; David, Bohumil

    2011-01-01

    Roč. 36, č. 21 (2011), s. 13614-13620 ISSN 0360-3199 R&D Projects: GA ČR GA106/09/0814; GA ČR(CZ) GAP108/11/0148 Institutional research plan: CEZ:AV0Z20410507 Keywords : MgH2 * Hydrogen storage * Hydrogen desorption * Catalysis Subject RIV: JG - Metallurgy Impact factor: 4.054, year: 2011

  15. Effects of intramuscular administration of tiletamine-zolazepam with and without sedative pretreatment on plasma and serum biochemical values and glucose tolerance test results in Japanese black bears (Ursus thibetanus japonicus).

    Science.gov (United States)

    Kamine, Akari; Shimozuru, Michito; Shibata, Haruki; Tsubota, Toshio

    2012-08-01

    To establish a safe anesthetic protocol with little effect on blood biochemical values and IV glucose tolerance test (IVGTT) results in Japanese black bears (Ursus thibetanus japonicus). 16 captive female Japanese black bears (5 to 17 years of age). Bears were randomly assigned to 4 treatment groups (4 bears/group) in which various treatment combinations were administered via blow dart: tiletamine HCl and zolazepam HCl (9 mg/kg) alone (TZ), TZ (6 mg/kg) and acepromazine maleate (0.1 mg/kg), TZ (6 mg/kg) and butorphanol tartrate (0.3 mg/kg), or TZ (3 mg/kg) and medetomidine HCl (40 μg/kg). Glucose injection for the IVGTT was started 130 minutes after TZ administration. Blood samples were obtained before, at, and intermittently after glucose injection for measurement of biochemical variables as well as plasma glucose and serum insulin concentrations during the IVGTT. Rectal temperature, pulse rate, and respiratory rate were assessed every 15 minutes during the experiment. Induction and maintenance of anesthesia were safely achieved with little adverse effect on cardiopulmonary function when each of the 4 anesthetic regimens was used, although mild hypothermia was induced. No difference was evident between treatment groups in blood biochemical values. Blood glucose and insulin concentration profiles during the IVGTT were similar among the bears given TZ, with or without acepromazine or butorphanol, but hyperglycemia and hypoinsulinemia developed in bears given TZ with medetomidine. All 4 anesthetic regimens yielded chemical restraint without affecting clinical and biochemical values in bears, but medetomidine appeared to affect IVGTT results. For this reason, medetomidine should not be used when anesthetizing bears for IVGTTs.

  16. Photoneutron strengths in 26Mg at energies of astrophysical interest

    Science.gov (United States)

    deBoer, R. J.; Best, A.; Görres, J.; Smith, K.; Tan, W.; Wiescher, M.; Raut, R.; Rusev, G.; Tonchev, A. P.; Tornow, W.

    2014-05-01

    Background: The 22Ne(α,n)25Mg reaction is an important source of neutrons for s-process nucleosynthesis. The neutron production from the reaction is quite sensitive to the low-energy cross section, which is dominated by narrow resonances. The high level density of the 26Mg compound nucleus above the α separation energy prevents simple extrapolations from higher energy and the high Coulomb barrier makes the direct measurements extremely difficult. For this reason, indirect methods must be employed to study the level properties of 26Mg. Purpose: The current measurement utilizes the reaction 26Mg(γ,n)25Mg to probe the level structure of the 26Mg compound nucleus from the neutron-separation energy at 11.093 MeV up to Ex≈ 12 MeV. Methods: The High-Intensity γ-ray Source of the Triangle Universities Nuclear Laboratory was used to bombard a ˜16 g sample of enriched 26Mg oxide and the resulting decay neutrons were detected with an array of nine liquid scintillator detectors. Neutron time-of-flight peaks with corresponding energies as low as ˜50 keV were detected. An efficiency measurement of the detectors was made at the University of Notre Dame's nuclear science laboratory to energies as low as 45 keV. Results: Five resonances were observed at Eγ = 11.150, 11.289, 11.329, 11.506, and 11.749 MeV and their strengths have been extracted. Conclusion:. The resulting strengths at Eγ = 11.289, 11.329, 11.506, and 11.749 MeV are in good agreement with previous measurements. The strength of the resonance at Eγ = 11.150 MeV is somewhat lower than previously measured but is in reasonable agreement when systematic uncertainties are considered. The results are also consistent with those of 25Mg(n,γ)26Mg studies where a comparison shows that many of the resonances observed here are the result of multiple unresolved narrow resonances.

  17. Group purchasing: an overview.

    Science.gov (United States)

    Wetrich, J G

    1987-07-01

    The various types and operational methods of purchasing groups are described, and evaluation of groups is discussed. Since group purchasing is increasing in popularity as a method of controlling drug costs, community and hospital pharmacy managers may need to evaluate various groups to determine the appropriateness of their services. Groups are categorized as independent, system based, or alliance or association based. Instead of "purchasing," some groups develop contracts for hospitals, which then purchase directly from the vendor. Aside from this basic difference between groups that purchase and groups that contract, comparisons among groups are difficult because of the wide variation in sizes and services. Competition developing from diversification among groups has led to "super groups," formed from local and regional groups. In evaluating groups, advantages and disadvantages germane to accomplishing the member's objectives must be considered. To ensure a group's success, members must be committed and support the group's philosophies; hospital pharmacists must help to establish a strong formulary system. To select vendors, groups should develop formal qualification and selection criteria and should not base a decision solely on price. The method of solicitation (bidding or negotiating), as well as the role of the prime vendor, should be studied. Legal implications of group purchasing, especially in the areas of administrative fees and drug diversion, must also be considered. The most advantageous group for each organization will include members with common missions and will be able to implement strategies for future success.

  18. Detection of PCT and urinary β2 -MG enhances the accuracy for localization diagnosing pediatric urinary tract infection.

    Science.gov (United States)

    Fang, Jian; Luan, Jiangwei; Zhu, Gaohong; Qi, Chang; Wang, Dandan

    2017-09-01

    The purpose of this article was to investigate whether the combination of urinary beta 2 microglobulin (urinary β 2 -MG) and procalcitonin (PCT) diagnosis could enhance the localization diagnostic precision of pediatric urinary tract infection comparing with single diagnosis. A study was conducted in the Nephrology Department of Wuhan women and children's health care centre. This study incorporated 85 participants, including 35 children who were diagnosed as upper urinary tract infection (UUTI) with the symptom of fever and 50 children who conducted lower urinary tract infection (LUTI). Levels of PCT and urinary β 2 -MG in both UUTI and LUTI patients were measured and compared. The level of PCT and β 2 -MG were both significantly higher in UUTI group compared with in LUTI group. AUC of urinary β 2 -MG ROC (sensitivity of 71.4%, specificity of 90.0%) was significantly smaller than that of PCT ROC (sensitivity of 77.1%, specificity of 96.0%) in the single diagnosis. Although in the combined diagnosis, the sensitivity and specificity increased to 88.6% and 98%, respectively. Both PCT and β 2 -MG could be used to localize the UTI. Introducing urinary β 2 -MG into PCT diagnosis could increase the sensitivity and specificity of UTI lesion diagnosis in clinical practice. © 2016 The Authors Journal of Clinical Laboratory Analysis Published by Wiley Periodicals, Inc.

  19. Ab initio calculations of half-metallic ferromagnetism in Cr-doped MgSe and MgTe semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Noor, N.A. [Department of Physics, University of the Punjab, Quaid-e-Azam Campus, 54590 Lahore (Pakistan); Alay-e-Abbas, S.M. [Department of Physics, University of Sargodha, Sargodha 40100 (Pakistan); Department of Physics, GC University Faisalabad, Allama Iqbal Road, Faisalabad 38000 (Pakistan); Sohaib, M.U. [Lahore Development Authority, 54590 Lahore (Pakistan); Ghulam Abbas, S.M. [Department of Chemistry, University of Agriculture, Faisalabad 38040 (Pakistan); Shaukat, A., E-mail: schaukat@gmail.com [Department of Physics, University of Sargodha, Sargodha 40100 (Pakistan)

    2015-01-15

    The full-potential linear-augmented-plane-waves plus local-orbitals (FP-LAPW+lo) method has been employed for investigation of half-metallic ferromagnetism in Cr-doped ordered zinc-blende MgSe and MgTe semiconductors. Calculations of exchange and correlation (XC) effects have been carried out using generalized gradient approximation (GGA) and orbital independent modified Becke–Johnson potential coupled with local (spin) density approximation (mBJLDA). The thermodynamic stability of the compounds and their preferred magnetic orders have been analyzed in terms of the heat of formation and minimum total energy difference in ferromagnetic (FM) and anti-ferromagnetic (AFM) ordering, respectively. Calculated electronic properties reveal that the Cr-doping induces ferromagnetism in MgSe and MgTe which gives rise to a half-metallic (HM) gap at Fermi level (E{sub F}). Further, the electronic band structure is discussed in terms of s (p)–d exchange constants that are consistent with typical magneto-optical experiment and the behavior of charge spin densities is presented for understanding the bonding nature. Our results demonstrate that the higher effective potential for the spin-down case is responsible for p–d exchange splitting. Total magnetic moment (mainly due to Cr-d states) of these compounds is 4µ{sub B}. Importantly, the electronic properties and HM gap obtained using mBJLDA show remarkable improvement as compared to the results obtained using standard GGA functional. - Highlights: • Spin effect theoretical study on Cr-doped MgSe and MgTe is performed. • Half-metallic ferromagnetism in Cr{sub x}Mg{sub 1−x}Se and Cr{sub x}Mg{sub 1−x}Te is established. • Results of WC-GGA and mBJLDA are compared for performance. • HM gaps for Cr{sub x}Mg{sub 1−x}Se and Cr{sub x}Mg{sub 1−x}Te show nonlinear variation with x. • Important values of exchange splitting/constants and moments are reported.

  20. Dry cryomagnetic system with MgB2 coil

    Science.gov (United States)

    Abin, D. A.; Mineev, N. A.; Osipov, M. A.; Pokrovskii, S. V.; Rudnev, I. A.

    2017-12-01

    MgB2 may be the future superconducting wire material for industrial magnets due to it’s higher operation temperature and potentially lower cost than low temperature superconductors (LTS) have. We designed a compact cryomagnetic system with the use of MgB2. The possibility of creating a magnet with a central field of 5 T from a commercial MgB2 wire by the “react and wound” method was investigated. The magnetic system is cooled by a cryocooler through a copper bus. The magnet has a warm bore diameter of 4 cm. The design of a magnet consisting of three concentric solenoids is proposed: an internal one of high-temperature superconductor (HTS), an average of MgB2, and an external of NbTi. The operating current of the system is 100 A. Two pairs of current leads are used. A separate pair of current leads for power supplying NbTi coil allows testing of MgB2 and HTS coils in an external field. The load curves for each of the magnets are calculated.

  1. Multifunctional MgO Layer in Perovskite Solar Cells.

    Science.gov (United States)

    Guo, Xudong; Dong, Haopeng; Li, Wenzhe; Li, Nan; Wang, Liduo

    2015-06-08

    A multifunctional magnesium oxide (MgO) layer was successfully introduced into perovskite solar cells (PSCs) to enhance their performance. MgO was coated onto the surface of mesoporous TiO(2) by the decomposition of magnesium acetate and, therefore, could block contact between the perovskite and TiO(2). X-ray photoelectron spectroscopy and infrared spectroscopy showed that the amount of H(2)O/hydroxyl absorbed on the TiO(2) decreased after MgO modification. The UV/Vis absorption spectra of the perovskite with MgO modification revealed an enhanced photoelectric performance compared with that of unmodified perovskite after UV illumination. In addition to the photocurrent, the photovoltage and fill factor also showed an enhancement after modification, which resulted in an increase in the overall efficiency of the cell from 9.6 to 13.9 %. Electrochemical impedance spectroscopy (EIS) confirmed that MgO acts as an insulating layer to reduce charge recombination. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Formation of MgZnO alloy under thermodynamic conditions

    Energy Technology Data Exchange (ETDEWEB)

    Markevich, I.V.; Stara, T.R., E-mail: stara_t@ukr.net; Kuchuk, A.V.; Polishchuk, Yu.O.; Kladko, V.P.

    2014-11-15

    Mg{sub x}Zn{sub 1−x}O ceramics with x=0.10, 0.15, 0.20, 0.25 and 0.30 were sintered at T{sub s}=700–1250 °C. Photoluminescence (PL) and PL excitation (PLE) spectra as well as X-ray diffraction patterns were measured at 293 K. Bandgap width was evaluated from the position of PLE peak. Non-monotonous dependence of PLE peak position on T{sub s} was observed for all used x. This effect was concluded to be caused by the formation of cubic phase side by side with hexagonal one and the enhancement of this process with increasing T{sub s}, which resulted in the decrease of Mg content in the hexagonal phase at T{sub s}>1000 °C. Temperature range of 1000–1050 °C was found to be the optimum one for the formation of hexagonal MgZnO alloy at used x. It was shown that x=0.20 was the solubility limit of MgO in hexagonal Mg{sub x}Zn{sub 1−x}O ceramics.

  3. Use of porous MgO in pyrochemical applications

    International Nuclear Information System (INIS)

    Maiya, P.S.; Sweeney, S.M.; Carroll, L.A.; Dusek, J.T.

    1994-11-01

    Pyrochemical methods for the extraction of transuranic elements from light water reactor spent fuel require a reduction step in which the oxide fuel is reduced to metals by Li in molten LiCl. The Li 2 O formed is electrolytically reduced to metal in a cell that uses a carbon (or inert) anode and a Li cathode to recycle the salt and minimize the waste. Use of a carbon anode causes carbon dust that interferes with the process. Moreover, current efficiency is reduced as a result of oxidation of Li to Li 2 O by CO 2 . A porous MgO shroud around the anode was found to obviate these problems. Porous MgO crucibles and rectangular bar specimens were fabricated from MgO powders (electrically fused MgO, reagent grade MgO were mixed in appropriate combinations with a binder and lubricant). Particle size, force applied to the powders during cold pressing, and sintering temperature were varied to achieve a total porosity of >45% (mostly open porosity) and to control pore size and pore distribution. Mercury intrusion porosimetry was used to determine the pore size and pore size distribution. Flexural strength is observed to be proportional to the square root of pore size, which is consistent with fracture mechanics

  4. Magnesium balances and 28Mg studies in man

    International Nuclear Information System (INIS)

    Spencer, H.; Schwartz, R.; Osis, D.

    1988-01-01

    The intestinal absorption of magnesium was determined under strictly controlled dietary conditions in patients with normal renal function and also in patients with chronic renal failure. The average net absorption of magnesium of patients with normal renal function, expressed as percent of the magnesium intake, was 48.5%, while that of patients with chronic renal failure was significantly lower, 17%. Increasing the calcium intake from a low calcium intake of 200 mg/day to different higher intake levels up to 2000 mg/day did not change the magnesium balance nor the net absorption of magnesium of both types of patients. The lack of effect of the higher calcium intake on the absorption of magnesium was confirmed in 28 Mg studies in which an oral dose of 28 Mg, as the chloride, was given. The excretion of the absorbed magnesium into the intestine, the endogenous fecal magnesium, was low. Also, increasing the phosphorus intake up to 2000 mg/day in subjects with normal renal function did not affect the magnesium balance, regardless of the calcium intake

  5. Ordered groups and infinite permutation groups

    CERN Document Server

    1996-01-01

    The subjects of ordered groups and of infinite permutation groups have long en­ joyed a symbiotic relationship. Although the two subjects come from very different sources, they have in certain ways come together, and each has derived considerable benefit from the other. My own personal contact with this interaction began in 1961. I had done Ph. D. work on sequence convergence in totally ordered groups under the direction of Paul Conrad. In the process, I had encountered "pseudo-convergent" sequences in an ordered group G, which are like Cauchy sequences, except that the differences be­ tween terms of large index approach not 0 but a convex subgroup G of G. If G is normal, then such sequences are conveniently described as Cauchy sequences in the quotient ordered group GIG. If G is not normal, of course GIG has no group structure, though it is still a totally ordered set. The best that can be said is that the elements of G permute GIG in an order-preserving fashion. In independent investigations around that t...

  6. Perbandingan Granisetron 0,01 mg/KgBb dengan Ondansetron 0,08 Mg/Kg.Bb Untuk Mencegah Mual Muntah Pascaoperasi Dini Mastektomi Radikal Modifikasi

    Directory of Open Access Journals (Sweden)

    Budi Fitriyana

    2013-04-01

    Full Text Available Postoperative nausea and vomiting not only cause discomfort to the patient, but also lead to electrolyte imbalance, regurgitation and aspiration, bleeding and loss of surgical sutures. Patients who experience postoperative nausea and vomiting will require further attention and treatment which of course increases the cost of medical services. Women who underwent mastectomy with accompanying decision underarm lymph nodes have a high risk of postoperative nausea and vomiting. Many anti-vomiting are given including antihistamines, butyrophenon, and dopamine receptor antagonists have been reported to have undesirable side effects including excessive sedation, hypotension, dry mouth, dysphoria, hallucinations and extrapyramidal effects. 5 HT3 receptor antagonists provide a major advancement for treatment of postoperative nausea and vomiting due to fewer side effects when compared with anti-vomiting medications before. This study will compare the two drugs 5 HT3 receptor antagonist granisetron with ondansetron in preventing postoperative nausea and vomiting modified radical mastectomy early. Conducted research on 58 patients ASA I and II modified radical mastectomy is performed under general anesthesia. Sampling was carried out using double-blind randomized controlled trial. Samples were divided into two groups by block randomization. Group G is given granisetron 0.01 gr / kg.bb and group O is given ondansetron 0.08 mg / kg.bb. Drug treatment is administered intravenously 30 minutes before the surgery ended on a complete evaluation of blood pressure, heart rate, oxygen saturation and length of surgery. Postoperative nausea and vomiting shortly after surgery assessed every hour until 6 hours after surgery (early postoperative nausea and vomiting to 4 scale (0-3. Data were analyzed by t-test, Chi-square test, Mann-Whitney test and Fisher's Exact test on Windows SPSS ver.16 The results suggest there is a tendency complaints of postoperative nausea and

  7. Stability of rapidly quenched and hydrogenated Mg-Ni-Y and Mg-Cu-Y alloys in extreme alkaline medium

    International Nuclear Information System (INIS)

    Gebert, A.; Khorkounov, B.; Wolff, U.; Mickel, Ch.; Uhlemann, M.; Schultz, L.

    2006-01-01

    Amorphous-nanocrystalline Mg 50 Ni 30 Y 20 and Mg 63 Ni 30 Y 7 and amorphous Mg 65 Cu 25 Y 10 alloys were produced by melt-spinning and characterized regarding their microstructure and thermal behaviour using XRD, TEM and DSC. Their electrochemical behaviour in the as-quenched state and after hydrogen charging at -25 mA/cm 2 for up to 20 h was studied in electrolytes with pH 5-7 and 13, but mainly in a battery electrolyte: 6 M KOH with pH 14.8 by means of anodic and cathodic polarization measurements. In the as-quenched state, the highest alloys stability was observed at pH 13. At pH 14.8, gradual oxidation and dissolution of copper or nickel governs the anodic behaviour before a passive state is attained. The dissolution of nickel is much more inhibited than that of copper due to its lower tendency to form soluble oxidized ions and to a stabilizing effect of higher fractions of yttrium in the alloy on the passivation. By galvanostatic charging, the Mg 65 Cu 25 Y 10 alloy shows the highest hydrogen absorption capacity followed by Mg 50 Ni 30 Y 20 and Mg 63 Ni 30 Y 7 . During the charging process, the alloys exhibit a change in the surface state chemistry, i.e. an enrichment of nickel- or copper-rich species, causing preferential oxidation and dissolution during subsequent exposure under free corrosion and anodic conditions. Mg-Ni-Y alloys demonstrate a higher stability during this treatment in extreme alkaline medium. The reasons for this and consequences regarding the use as electrode materials are discussed in detail

  8. Optical absorption and thermoluminescence in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature; Absorcion optica y termoluminiscencia en MgO, MgO:Ni y MgO:Li irradiados a temperatura ambiente

    Energy Technology Data Exchange (ETDEWEB)

    Delgado, L

    1984-07-01

    Optical absorption and thermoluminescence (TL) studies in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature are presented. In pure Mg O the thermal annihilation of Fe3+ by recombination with thermally released electrons at {approx} 90 and 175 degree centigree and the V center annealing by hole release up to 100 degree centigree cause the observed glow peaks at these temperatures. The TL excitation spectrum shows two maxima at 245 nm (electron center) and 288 nm (Fe3+). In Mg O:Ni X irradiation induces Fe{sup 2}+ {yields}- Fe{sup 3}+ and Ni{sup 2}+ {yields} Ni{sup 3}+ oxidations. Two TL emission bands centered at 110 degree centigree (red) and 80 o{sup C} (green) are assigned to electron release and their recombination at Fe{sup 3}+ and Ni{sup 3}+ respectively. In Mg O:Li two TL emission bands, one blue (430 nm) and the other red (730 nm) with excitation maxima at 245 nm (electron center) and 200 nm (hole center) respectively are observed. No V-center formation was detected in both Ni and Li doped samples. (Author) 42 refs.

  9. Thermophysical properties of some liquid binary Mg-based alloys

    Directory of Open Access Journals (Sweden)

    Plevachuk Y.

    2017-01-01

    Full Text Available In this study, some structure-sensitive thermophysical properties, namely, electrical conductivity, thermal conductivity and thermoelectric power of liquid binary alloys Al33.3Mg66.7, Mg47.6Zn52.4 and Mg33.3Zn66.7 (all in wt.%, as the most promising cast alloys to fabricate components for cars, aircraft and other complex engineering products, were investigated. The electrical conductivity and thermoelectric power were measured in a wide temperature range by the four-point contact method. The thermal conductivity was measured by the steady-state concentric cylinder method. The obtained results are compared with literature experimental and calculated data.

  10. Improved Mg-based alloys for hydrogen storage

    Energy Technology Data Exchange (ETDEWEB)

    Sapru, K.; Ming, L.; Stetson, N.T.; Evans, J. [Energy Conversion Devices, Inc., Troy, MI (United States)

    1998-08-01

    The overall objective of this on-going work is to develop low temperature alloys capable of reversibly storing at least 3 wt.% hydrogen, allowing greater than for 2 wt.% at the system level which is required by most applications. Surface modification of Mg can be used to improve its H-sorption kinetics. The authors show here that the same Mg-transition metal-based multi-component alloy when prepared by melt-spinning results in a more homogeneous materials with a higher plateau pressure as compared to preparing the material by mechanical grinding. They have also shown that mechanically alloyed Mg{sub 50}Al{sub 45}Zn{sub 5} results in a sample having a higher plateau pressure.

  11. Beta decay of 31,32Na and 31Mg

    International Nuclear Information System (INIS)

    Klotz, G.; Baumann, P.; Bounajma, M.; Huck, A.; Knipper, A.; Walter, G.; Poves, A.; Retamosa, J.

    1993-01-01

    31,32 Na and 31 Mg beta decays were studied at the CERN on-line mass separator ISOLDE by gamma, gamma-gamma and neutron-gamma measurements. In the 31 Na decay, the assignment of previously reported γ transitions and the observation of a new level at 3760 keV lead to a revised decay scheme. In the 31 Mg → 31 Al decay, a new decay scheme involves ten β branches and three states are reported for the first time. New spectroscopic results have been obtained in the 32 Na β - decay. A previously non-interpreted 1436 keV γ ray is now assigned in the 32 Mg scheme. (author) 33 refs., 16 figs., 12 tabs

  12. Beta-delayed proton emission from {sup 20}Mg

    Energy Technology Data Exchange (ETDEWEB)

    Lund, M.V.; Fynbo, H.O.U.; Howard, A.M.; Kirsebom, O.S.; Munch, M.; Riisager, K. [Aarhus University, Department of Physics and Astronomy, Aarhus C (Denmark); Andreyev, A.; Wadsworth, R. [University of York, Department of Physics, York (United Kingdom); Borge, M.J.G. [CSIC, Instituto de Estructura de la Materia, Madrid (Spain); CERN, ISOLDE, PH Department, Geneva 23 (Switzerland); Cederkaell, J. [Lund University, Department of Nuclear Physics, Lund (Sweden); Witte, H. de; Huyse, M.; Duppen, P. van [Instituut voor Kern- en Stralingsfysica, KU-Leuven, Leuven (Belgium); Fraile, L.M.; Vedia, V. [Universidad Complutense de Madrid, CEI Moncloa, Facultad de Ciencias Fisicas, Madrid (Spain); Greenlees, P.T.; Konki, J.; Rahkila, P. [University of Helsinki, Helsinki Institute of Physics, Helsinki (Finland); University of Jyvaeskylae, Department of Physics, Jyvaeskylae (Finland); Harkness-Brennan, L.J.; Judson, D.S.; Page, R.D. [University of Liverpool, Department of Physics, Oliver Lodge Laboratory, Liverpool (United Kingdom); Jonson, B.; Lindberg, S.; Nilsson, T. [Chalmers University of Technology, Department of Physics, Goeteborg (Sweden); Kurcewicz, J.; Madurga, M.; Rapisarda, E. [CERN, ISOLDE, PH Department, Geneva (Switzerland); Lazarus, I.; Pucknell, V. [STFC Daresbury, Daresbury, Warrington (United Kingdom); Lica, R. [CERN, ISOLDE, PH Department, Geneva (Switzerland); ' ' Horia Hulubei' ' National Institute of Physics and Nuclear Engineering, Magurele (Romania); Marginean, N.; Marginean, R.; Mihai, C.; Negret, A.; Pascu, S.; Rotaru, F.; Stanoiu, M.; Turturica, A. [' ' Horia Hulubei' ' National Institute of Physics and Nuclear Engineering, Magurele (Romania); Marroquin, I.; Nacher, E.; Perea, A.; Tengblad, O. [CSIC, Instituto de Estructura de la Materia, Madrid (Spain); Sotty, C. [Instituut voor Kern- en Stralingsfysica, KU-Leuven, Leuven (Belgium); ' ' Horia Hulubei' ' National Institute of Physics and Nuclear Engineering, Magurele (Romania); Warr, N. [Universitaet Koeln, Institut fuer Kernphysik, Koeln (Germany); Collaboration: IDS Collaboration

    2016-10-15

    Beta-delayed proton emission from {sup 20} Mg has been measured at ISOLDE, CERN, with the ISOLDE Decay Station (IDS) setup including both charged-particle and gamma-ray detection capabilities. A total of 27 delayed proton branches were measured including seven so far unobserved. An updated decay scheme, including three new resonances above the proton separation energy in {sup 20}Na and more precise resonance energies, is presented. Beta-decay feeding to two resonances above the Isobaric Analogue State (IAS) in {sup 20}Na is observed. This may allow studies of the 4032.9(2.4) keV resonance in {sup 19}Ne through the beta decay of {sup 20}Mg, which is important for the astrophysically relevant reaction {sup 15}O(α, γ){sup 19}Ne. Beta-delayed protons were used to obtain a more precise value for the half-life of {sup 20}Mg, 91.4(1.0) ms. (orig.)

  13. Electromagnetic densification of MgB2/Cu wires

    International Nuclear Information System (INIS)

    Woźniak, M; Glowacki, B A

    2014-01-01

    Electromagnetic compaction of in situ MgB 2 /Cu wire has been achieved using a custom-built 200 J device. The monofilament core packing density was increased by 8% and up to 31% for unreacted and reacted wires respectively. The higher density of the MgB 2 core resulted in a critical current density increase of up to 75% in comparison to that for cold-drawn-only wire. Applying this treatment to a wire with Cu powder additions to the core and with an optimized heat treatment resulted in one of the highest ever reported values of J c for MgB 2 /Cu wires of 6.83 × 10 3  A cm −2 at 4.2 K and 6 T. (paper)

  14. Strong, Ductile, and Thermally Stable bcc-Mg Nanolaminates.

    Science.gov (United States)

    Pathak, Siddhartha; Velisavljevic, Nenad; Baldwin, J Kevin; Jain, Manish; Zheng, Shijian; Mara, Nathan A; Beyerlein, Irene J

    2017-08-15

    Magnesium has attracted attention worldwide because it is the lightest structural metal. However, a high strength-to-weight ratio remains its only attribute, since an intrinsic lack of strength, ductility and low melting temperature severely restricts practical applications of Mg. Through interface strains, the crystal structure of Mg can be transformed and stabilized from a simple hexagonal (hexagonal close packed hcp) to body center cubic (bcc) crystal structure at ambient pressures. We demonstrate that when introduced into a nanocomposite bcc Mg is far more ductile, 50% stronger, and retains its strength after extended exposure to 200 C, which is 0.5 times its homologous temperature. These findings reveal an alternative solution to obtaining lightweight metals critically needed for future energy efficiency and fuel savings.

  15. MgB2 superconducting wires basics and applications

    CERN Document Server

    2016-01-01

    The compendium gives a complete overview of the properties of MgB2 (Magnesium Diboride), a superconducting compound with a transition temperature of Tc = 39K, from the fundamental properties to the fabrication of multifilamentary wires and to the presentation of various applications. Written by eminent researchers in the field, this indispensable volume not only discusses superconducting properties of MgB2 compounds, but also describes known preparation methods of thin films and of bulk samples obtained under high pressure methods. A unique selling point of the book is the detailed coverage of various applications based on MgB2, starting with MRI magnets and high current cables, cooled by Helium (He) vapor. High current cables cooled by liquid hydrogen are also highlighted as an interesting alternative due to the shrinking He reserves on earth. Other pertinent subjects comprise permanent magnets, ultrafine wires for space applications and wind generator projects.

  16. Thermodynamic evaluation of the Cu-Mg-Zr system

    International Nuclear Information System (INIS)

    Haemaelaeinen, M.; Zeng, K.

    1999-01-01

    The thermodynamic evaluation of the Cu-Mg-Zr system is presented in this paper. A literature survey was carried out first based on the most recent literature, which was scanned from the THERMET literature database. The evaluation of the thermodynamic parameters was carried out using Thermo-Calc (version H) software. The evaluation of the Cu-Mg-Zr system was carried out using the most recent experimental data from the literature and a set of DTA measurements. DTA measurements were done using alumina (Al 2 O 3 ) crucibles under helium atmosphere with the niobium (Nb) reference crucible. The evaluated Cu-Mg-Zr phase diagram fitted well with experimental data with the liquidus data in a limited range of composition. There were two miscibility gaps observe in the system. New τ phase was detected using the X-ray and microscopic analysis and the data was used in this evaluation. (orig.)

  17. The electric dipole moment of magnesium deuteride, MgD.

    Science.gov (United States)

    Steimle, Timothy C; Zhang, Ruohan; Wang, Hailing

    2014-06-14

    The (0,0) A(2)Π-X (2)Σ(+) band of a cold molecular beam sample of magnesium monodeuteride, MgD, has been recorded field-free and in the presence of a static electric field of up to 11 kV/cm. The lines associated with the lowest rotational levels are detected for the first time. The field-free spectrum was analyzed to produce an improved set of fine structure parameters for the A(2)Π (v = 0) state. The observed electric field induced splittings and shifts were analyzed to produce permanent electric dipole moments, μ(el) of 2.567(10)D and 1.31(8)D for A(2)Π (v = 0) and X(2)Σ(+)(v = 0) states, respectively. The recommended value for μ(el)(X(2)Σ(+) (v = 0)) for MgH, based upon the measured value for MgD, is 1.32(8)D.

  18. Sequential magnetic switching in Fe/MgO(001) superlattices

    Science.gov (United States)

    Magnus, F.; Warnatz, T.; Palsson, G. K.; Devishvili, A.; Ukleev, V.; Palisaitis, J.; Persson, P. O. Å.; Hjörvarsson, B.

    2018-05-01

    Polarized neutron reflectometry is used to determine the sequence of magnetic switching in interlayer exchange coupled Fe/MgO(001) superlattices in an applied magnetic field. For 19.6 Å thick MgO layers we obtain a 90∘ periodic magnetic alignment between adjacent Fe layers at remanence. In an increasing applied field the top layer switches first followed by its second-nearest neighbor. For 16.4 Å MgO layers, a 180∘ periodic alignment is obtained at remanence and with increasing applied field the layer switching starts from the two outermost layers and proceeds inwards. This sequential tuneable switching opens up the possibility of designing three-dimensional magnetic structures with a predefined discrete switching sequence.

  19. Growth and scintillation properties of BaMgF4

    International Nuclear Information System (INIS)

    Yanagida, Takayuki; Kawaguchi, Noriaki; Fujimoto, Yutaka; Sugiyama, Makoto; Furuya, Yuki; Kamada, Kei; Yokota, Yuui; Yoshikawa, Akira; Chani, Valery

    2010-01-01

    By using the micro-pulling down (μ-PD) method, the barium magnesium fluoride (BaMgF 4 ) single crystalline scintillator was produced. The crystal was cut and mirror polished to the physical dimensions of 1x2x10 mm 3 for examination of scintillation properties. BaMgF 4 demonstrated ∼70% transmittance in wavelength range above 170 nm, and strong emission peaking around 205 nm was observed under X-ray excitation. The absolute light yield of BaMgF 4 was 1300±100 ph/MeV, and the decay time profile showed two components as 0.57±0.01 (70%) and 2.2±0.31 (30%) ns at room temperature.

  20. The comparison of the effects of standard 20 mg atorvastatin daily and 20 mg atorvastatin every other day on serum LDL-cholesterol and high sensitive C-reactive protein levels.

    Science.gov (United States)

    Keleş, Telat; Akar Bayram, Nihal; Kayhan, Tuğba; Canbay, Alper; Sahin, Deniz; Durmaz, Tahir; Ozdemir, Ozcan; Aydoğdu, Sinan; Diker, Erdem

    2008-12-01

    In this study, we aimed at comparing the effects of standard once daily 20 mg atorvastatin treatment with that of atorvastatin 20 mg administered every other day on serum lipids and high sensitive C-reactive protein (hs-CRP) levels. Sixty-one patients with serum total cholesterol levels of above 200 mg/dl and low density lipoprotein (LDL)--cholesterol levels of above 130 mg/dl were included in this prospective, randomized study. The patients were randomized into daily treatment of 20 mg atorvastatin (standard treatment) and 20 mg atorvastatin every other day (every other day treatment) groups. Before the treatment and at each visit, serum lipids and hs-CRP levels of all the patients were measured. Statistical analyses were performed Chi-square, unpaired t and two-way repeated measurements ANOVA tests. In the every other day treatment group, there was a 36.1% reduction in LDL-cholesterol levels by the end of first month (p0.05). The LDL cholesterol levels of the group receiving 20 mg atorvastatin every day was reduced by %41 by the end of 1 month (pevery other day, there was a 21% decrease in hs-CRP levels compared to the basal measurements at the end of first month (pevery day the decrease in hs-CRP levels at the end of one month was more striking (37%, p0.05). Alternate-day dosing of atorvastatin causes a significant lipid-lowering and antiinflammatory effects similar to that of daily administration and yet may provide some cost savings.

  1. High production rate of IBAD-MgO buffered substrate

    Energy Technology Data Exchange (ETDEWEB)

    Yoshizumi, M., E-mail: myoshizumi@istec.or.j [Superconductivity Research Laboratory, ISTEC, Shinonome 1-10-13, Koto-ku, Tokyo 135-0062 (Japan); Miyata, S.; Ibi, A.; Fukushima, H.; Yamada, Y.; Izumi, T.; Shiohara, Y. [Superconductivity Research Laboratory, ISTEC, Shinonome 1-10-13, Koto-ku, Tokyo 135-0062 (Japan)

    2009-10-15

    The conventional IBAD (Ion Beam Assisted Deposition) process using fluorite materials yields low production rates, resulting in high production cost, which reduces the motivation for practical application in spite of its high quality. The IBAD process using rock salt materials, e.g. MgO, is well known as a strong candidate of practical application due to its potential of high production rate and high in-plane grain alignment. In this work, the IBAD-MgO process was investigated for a newly developed architecture of PLD (Pulsed Laser Deposition)-CeO{sub 2}/sputter-LMO (LaMnO{sub 3})/IBAD-MgO/sputter-GZO (Gd{sub 2}Zr{sub 2}O{sub 7})/Hastelloy{sup TM} to make long buffered metal tapes with high properties and a high production rate. The 50 m-long IBAD-MgO substrates with about 4 deg. of DELTAphiCeO{sub 2} in an XRD phi scan could be fabricated repeatedly. A GdBCO (GdBa{sub 2}Cu{sub 3}O{sub x}) layer deposited on the buffered substrate showed the minimum I{sub c} value of 325 A/cm-w in a 41 m-long tape. Almost of the tape showed 500-600 A/cm-w of I{sub c} value. The deposition time for the IBAD-MgO layer was 60 s which was about 2 orders of magnitude shorter than the conventional IBAD process. The production rate of 24 m/h was realized at the IBAD-MgO process to fabricate the GdBCO coated conductor with high J{sub c} and I{sub c} properties.

  2. ALIGNMENTS OF GROUP GALAXIES WITH NEIGHBORING GROUPS

    International Nuclear Information System (INIS)

    Wang Yougang; Chen Xuelei; Park, Changbom; Yang Xiaohu; Choi, Yun-Young

    2009-01-01

    Using a sample of galaxy groups found in the Sloan Digital Sky Survey Data Release 4, we measure the following four types of alignment signals: (1) the alignment between the distributions of the satellites of each group relative to the direction of the nearest neighbor group (NNG); (2) the alignment between the major axis direction of the central galaxy of the host group (HG) and the direction of the NNG; (3) the alignment between the major axes of the central galaxies of the HG and the NNG; and (4) the alignment between the major axes of the satellites of the HG and the direction of the NNG. We find strong signal of alignment between the satellite distribution and the orientation of central galaxy relative to the direction of the NNG, even when the NNG is located beyond 3r vir of the host group. The major axis of the central galaxy of the HG is aligned with the direction of the NNG. The alignment signals are more prominent for groups that are more massive and with early-type central galaxies. We also find that there is a preference for the two major axes of the central galaxies of the HG and NNG to be parallel for the system with both early central galaxies, however, not for the systems with both late-type central galaxies. For the orientation of satellite galaxies, we do not find any significant alignment signals relative to the direction of the NNG. From these four types of alignment measurements, we conclude that the large-scale environment traced by the nearby group affects primarily the shape of the host dark matter halo, and hence also affects the distribution of satellite galaxies and the orientation of central galaxies. In addition, the NNG directly affects the distribution of the satellite galaxies by inducing asymmetric alignment signals, and the NNG at very small separation may also contribute a second-order impact on the orientation of the central galaxy in the HG.

  3. Perbandingan Pengaruh Pemberian Granisetron 1 mg Intravena dengan Plasebo (Salin untuk Mencegah Kejadian Menggigil Pascaanestesi Spinal pada Seksio Sesarea

    Directory of Open Access Journals (Sweden)

    Heru Wishnu Manunggal

    2014-08-01

    Full Text Available Post anesthesia shivering is one of the complications that often occur in anesthetic action. The purpose of this study was to assess the administration of intravenous granisetron 1 mg in reducing the incidence of shivering in patients undergoing caesarean section with spinal anesthesia. Clinical research methods in double-blind randomized controlled 38 patients who underwent seksios esarea at Dr. Hasan Sadikin Hospital Bandung during April–September 2011, aged 20–35 years overall status American Society of Anesthesia (ASA II physical and random into two groups: the group that received granisetron 1 mg intravenously or saline prior to spinal anesthesia with bupivacaine 12.5 mg. Incidence of shivering recorded by degrees 0–4. The results showed statistically significant patient characteristic data and core body temperature did not differ between the two groups. Shivering less in granisetron group (21.1% than the placebo group (52.6% with statistically significant results (p<0.05.The conclusions of this study indicate that administration of granisetron 1 mg intravenously before spinal anesthesia in Caesarean section reduces the incidence of shivering postanesthesia

  4. Citizens' action group

    International Nuclear Information System (INIS)

    Andritzky, W.

    1978-01-01

    For the first empirical study of citizens' action groups 331 such groups were consulted. Important information was collected on the following aspects of these groups: their self-image, areas and forms of activities, objectives and their extent, how long the group has existed, successes and failures and their forms of organisation. (orig.) [de

  5. Divorced Eutectic Solidification of Mg-Al Alloys

    Science.gov (United States)

    Monas, Alexander; Shchyglo, Oleg; Kim, Se-Jong; Yim, Chang Dong; Höche, Daniel; Steinbach, Ingo

    2015-08-01

    We present simulations of the nucleation and equiaxed dendritic growth of the primary hexagonal close-packed -Mg phase followed by the nucleation of the -phase in interdendritic regions. A zoomed-in region of a melt channel under eutectic conditions is investigated and compared with experiments. The presented simulations allow prediction of the final properties of an alloy based on process parameters. The obtained results give insight into the solidification processes governing the microstructure formation of Mg-Al alloys, allowing their targeted design for different applications.

  6. Comparison of characteristics of LiF:Mg,Ti e LiF:Mg,Cu,P thermoluminescent dosemeters; Comparacao das caracteristicas dos dosimetros termoluminescentes LiF:Mg,Ti e LiF:Mg,Cu,P

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, M.S.; Filipov, D., E-mail: dfilipov@utfpr.edu.br [Universidade Tecnologica Federal do Parana (UTFPR/DAFIS), Curitiba, PR (Brazil). Departamento Academicao de Fisica; Schelin, H.R. [Instituto de Pesquisa Pele Pequeno Principe (IPPPP), Curitiba, PR (Brazil)

    2014-07-01

    The aim of the current study was to compare the thermoluminescent dosimeters LiF:Mg,Ti (TLD-100) and LiF:Mg,Cu,P (MCP) data, which were acquired by the Federal Technological University - Parana. Tests were realized, for this purpose, such as: sensitivity (only one MCP TLD did not present results within the limit range), linearity (whose MCP result was better than the TLD-100 one), energy dependence (TLD-100 presented lower variation than MCP TLD) and reproducibility (whose TLD-100 results were better than the MCP ones). The results from both dosimeters show that these TLDs attend radiodiagnostic dosimetry criteria, however MCP had more satisfactory results. (author)

  7. Exploring the island of inversion with the d({sup 30}Mg,p){sup 31}Mg reaction

    Energy Technology Data Exchange (ETDEWEB)

    Bildstein, Vinzenz

    2010-12-07

    In this thesis the results of a d({sup 30}Mg,p){sup 31}Mg experiment at REX-ISOLDE are presented. {sup 31}Mg is located directly on the border of the so-called ''Island of Inversion'', a region of the nuclear chart around {sup 32}Mg where deformed intruder states of the fp shell form the ground states of the nuclei instead of the normal spherical states of the sd shell. A recent experiment has shown the ground state of {sup 31}Mg to be a 1/2{sup +} state and indicates more than 90% intruder configuration. The question whether the low-lying excited states of {sup 31}Mg are deformed intruder states as well or rather spherical states from the sd shell, indicating shape coexistence, is still open. The d({sup 30}Mg,p) {sup 31}Mg reaction is thus a good tool to gain more insight into the nature of the Island of Inversion. In the framework of this thesis the angular distribution of protons was measured for the second excited state at 221 keV in coincidence with de-excitation {gamma}-rays. The angular distribution was compared to DWBA calculations for different transferred orbital momenta, identifying the state for the first time as an l=1 state. The experiment was performed with the new charged particle detector setup T-REX. The setup is optimized for transfer reactions with radioactive beams in inverse kinematics. T-REX was developed, built, installed, and used for this first one neutron transfer experiment in the context of this thesis. The T-REX setup consists of {delta}E-E{sub Rest} telescopes made out of position sensitive silicon detectors that cover almost 4{pi} of the solid angle and can be combined with the MINIBALL {gamma}-ray detector array. It has a large solid angle for the detection and identification of the light recoils from transfer reactions. T-REX allows in combination with the MINIBALL Germanium detector array the tagging of the excited states by their characteristic {gamma}-rays. The combination of T-REX and MINIBALL achieves an

  8. Microstructure and fatigue properties of Mg-to-steel dissimilar resistance spot welds

    International Nuclear Information System (INIS)

    Liu, L.; Xiao, L.; Chen, D.L.; Feng, J.C.; Kim, S.; Zhou, Y.

    2013-01-01

    Highlights: ► Mg/steel dissimilar spot weld had the same fatigue strength as Mg/Mg similar weld. ► Crack propagation path of Mg/Mg and Mg/steel welds was the same. ► Penetration of Zn into the Mg base metal led to crack initiation of Mg/steel weld. ► HAZ weakening and stress concentration led to crack initiation of Mg/Mg weld. -- Abstract: The structural application of lightweight magnesium alloys in the automotive industry inevitably involves dissimilar welding with steels and the related durability issues. This study was aimed at evaluating the microstructural change and fatigue resistance of Mg/steel resistance spot welds, in comparison with Mg/Mg welds. The microstructure of Mg/Mg spot welds can be divided into: base metal, heat affected zone and fusion zone (nugget). However, the microstructure of Mg/steel dissimilar spot welds had three different regions along the joined interface: weld brazing, solid-state joining and soldering. The horizontal and vertical Mg hardness profiles of Mg/steel and Mg/Mg welds were similar. Both Mg/steel and Mg/Mg welds were observed to have an equivalent fatigue resistance due to similar crack propagation characteristics and failure mode. Both Mg/steel and Mg/Mg welds failed through thickness in the magnesium sheet under stress-controlled cyclic loading, but fatigue crack initiation of the two types of welds was different. The crack initiation of Mg/Mg welds was occurred due to a combined effect of stress concentration, grain growth in the heat affected zone (HAZ), and the presence of Al-rich phases at HAZ grain boundaries, while the penetration of small amounts of Zn coating into the Mg base metal stemming from the liquid metal induced embrittlement led to crack initiation in the Mg/steel welds.

  9. A study of stability of MgH{sub 2} in Mg-8at%Al alloy powder

    Energy Technology Data Exchange (ETDEWEB)

    Tanniru, Mahesh; Ebrahimi, Fereshteh [Materials Science and Engineering Department, University of Florida, Gainesville, FL 32611 (United States); Slattery, Darlene K. [Florida Solar Energy Center (FSEC), Cocoa, FL (United States)

    2010-04-15

    To investigate the effect of Al addition on the stability of magnesium hydride, the hydrogenation characteristics of a Mg-8at%Al alloy powder synthesized using the electrodeposition technique were evaluated. The characterization of the hydrogenation behavior within the 180 C-280 C temperature range and the subsequent microstructural analysis elucidated that the amount of Al present in the hydride decreased with increasing temperature. This observation suggests that Al has very low solubility in magnesium hydride but Al can be accommodated in MgH{sub 2} by processing under non-equilibrium conditions. Pressure-composition isotherms were developed at different temperatures for the Mg-Al powder as well as pure Mg powder. The results indicate that the enthalpy of formation was slightly lower for the Mg-8at%Al powder while the enthalpy of dissociation did not change. The absence of noticeable influence of Al addition on the stability of magnesium hydride is attributed to its lack of solubility. (author)

  10. Effect of amorphous lamella on the crack propagation behavior of crystalline Mg/amorphous Mg-Al nanocomposites

    Science.gov (United States)

    Hai-Yang, Song; Yu-Long, Li

    2016-02-01

    The effects of amorphous lamella on the crack propagation behavior in crystalline/amorphous (C/A) Mg/Mg-Al nanocomposites under tensile loading are investigated using the molecular dynamics simulation method. The sample with an initial crack of orientation [0001] is considered here. For the nano-monocrystal Mg, the crack growth exhibits brittle cleavage. However, for the C/A Mg/Mg-Al nanocomposites, the ‘double hump’ behavior can be observed in all the stress-strain curves regardless of the amorphous lamella thickness. The results indicate that the amorphous lamella plays a critical role in the crack deformation, and it can effectively resist the crack propagation. The above mentioned crack deformation behaviors are also disclosed and analyzed in the present work. The results here provide a strategy for designing the high-performance hexagonal-close-packed metal and alloy materials. Project supported by the National Natural Science Foundation of China (Grant Nos. 11372256 and 11572259), the 111 Project (Grant No. B07050), the Program for New Century Excellent Talents in University of Ministry of Education of China (Grant No. NCET-12-1046), and the Program for New Scientific and Technological Star of Shaanxi Province, China (Grant No. 2012KJXX-39).

  11. Communication in Organizational Groups

    OpenAIRE

    Monica RADU

    2007-01-01

    Organizational group can be defined as some persons between who exist interactive connections (functional, communication, affective, normative type). Classification of these groups can reflect the dimension, type of relationship or type of rules included. Organizational groups and their influence over the individual efficiency and the efficiency of the entire group are interconnected. Spontaneous roles in these groups sustain the structure of the relationship, and the personality of each indi...

  12. [Emission spectrum temperature sensitivity of Mg4FGeO6 : mn induced by laser].

    Science.gov (United States)

    Wang, Sheng; Liu, Jing-Ru; Shao, Jun; Hu, Zhi-Yun; Tao, Bo; Huang, Mei-Sheng

    2013-08-01

    In order to develop a new sort of thermally sensitive phosphor coating, the emission spectrum thermally sensitivity of Mg4FGeO6 : Mn induced by laser was studied. The spectrum measurement system with heating function was set up, and the emission spectrum of Mg4FGeO6 : Mn at various temperatures were measured. Absorption spectrum was measured, and the mechanism of formation of the structure of double peak was analyzed with the perturbation theory of crystal lattice. The group of peaks around 630 nm is represented by the transitions 4F"2 to 4A2, whereas the group of peaks around 660 nm is due to the transitions 4F'2 to 4A2. The occupancy of both excited states 4F'2 and 4F"2 is in thermal equilibrium. Thus increasing temperature causes the intensity of the emission in the group around 630 nm to increase at the expense of the emission intensity of the group around 660 nm. The various spectral regions in emission differ with temperature, which could be used to support the intensity-ratio measurement method. The intensity-ratio change curve as a function of temperature was fitted, which shows that the range of temperature measurement is between room temperature and 800 K.

  13. Influence of Heat Treatment on Biocorrosion and Hemocompatibility of Biodegradable Mg-35Zn-3Ca Alloy

    Directory of Open Access Journals (Sweden)

    Jeong-Hui Ji

    2015-01-01

    Full Text Available Mg-35Zn-3Ca (wt.% alloy containing nontoxic and biocompatible Zn and Ca as alloying elements was prepared and subjected to heat treatment and artificial aging for different duration of time to reduce its rate of degradation. Solution heat treatment was performed at 310°C while artificial aging was performed at 170°C for 0, 2.5, 5.0, 7.5, and 10.0 h and they were designated as AT0, AT1, AT2, AT3, and AT4, respectively. The finest and most homogenous reticulum was observed on the surface of the AT2 group. The result of immersion test in Hank’s balanced salt solution (HBSS showed that the corrosion rate of the AT2 group was 2.32 mg/(cm2 day, which was significantly lower as compared to other groups P<0.05. The hemolysis value was ≤5% in all groups, indicating no toxicity during short-term blood reaction.

  14. Selective detection of Mg2+ ions via enhanced fluorescence emission using Au–DNA nanocomposites

    Directory of Open Access Journals (Sweden)

    Tanushree Basu

    2017-04-01

    Full Text Available The biophysical properties of DNA-modified Au nanoparticles (AuNPs have attracted a great deal of research interest for various applications in biosensing. AuNPs have strong binding capability to the phosphate and sugar groups in DNA, rendering unique physicochemical properties for detection of metal ions. The formation of Au–DNA nanocomposites is evident from the observed changes in the optical absorption, plasmon band, zeta potential, DLS particle size distribution, as well as TEM and AFM surface morphology analysis. Circular dichroism studies also revealed that DNA-functionalized AuNP binding caused a conformational change in the DNA structure. Due to the size and shape dependent plasmonic interactions of AuNPs (33–78 nm with DNA, the resultant Au–DNA nanocomposites (NCs exhibit superior fluorescence emission due to chemical binding with Ca2+, Fe2+ and Mg2+ ions. A significant increase in fluorescence emission (λex = 260 nm of Au–DNA NCs was observed after selectively binding with Mg2+ ions (20–800 ppm in an aqueous solution where a minimum of 100 ppm Mg2+ ions was detected based on the linearity of concentration versus fluorescence intensity curve (λem = 400 nm. The effectiveness of Au–DNA nanocomposites was further verified by comparing the known concentration (50–120 ppm of Mg2+ ions in synthetic tap water and a real life sample of Gelusil (300–360 ppm Mg2+, a widely used antacid medicine. Therefore, this method could be a sensitive tool for the estimation of water hardness after careful preparation of a suitably designed Au–DNA nanostructure.

  15. Hydrothermal replacement of calcite by Mg-carbonates

    Science.gov (United States)

    Jonas, Laura; Mueller, Thomas; Dohmen, Ralf

    2014-05-01

    The transport of heat and mass through the Earth's crust is coupled to mineral reactions and the exchange of isotopes and elements between different phases. Carbonate minerals are a major constituent of the Earth's crust and play an important role in different physical, chemical and even biological processes. In this experimental study, the element exchange reaction between calcite (CaCO3) and a Mg-rich fluid phase is investigated under hydrothermal conditions. Single crystals of calcite (2x2x2 mm) react with 1 ml of a 1 M MgCl2 solution at 200° C in a Teflon-lined steel autoclave for different times between one day and four weeks. The reaction leads to the formation of a porous reaction front and the pseudomorphic replacement of calcite by dolomite [CaMg(CO3)2] and magnesite (MgCO3). Scanning electron microscopy revealed that the reaction rim consists of small Mg-carbonate rhombs closely attached to each other, suggesting that the replacement reaction takes place by a dissolution-precipitation mechanism. Typically, the observed reaction front can be divided into two different domains. The outer part of the reaction rim, i.e. from the mineral surface in contact to the fluid inwards, consists of magnesite, whereas the inner part of the rim surrounding the unreacted calcite core consists of Ca-rich dolomite. The formation of a porous microstructure that varies in different parts of the reaction rim is a direct result of the large molar volume change induced by the replacement of calcite by magnesite and dolomite. The developing porosity therefore creates fluid pathways that promote the progress of the reaction front towards the unreacted core of the single crystal. Compositional profiles measured perpendicular to the mineral surface across the reactions rims using electron microprobe (EMPA) further revealed a compositional gradient within the reaction rim with regard to the structure-forming elements Mg and Ca. Here, the amount of Mg incorporated in both product

  16. [Social crisis, spontaneous groups and group order].

    Science.gov (United States)

    Edelman, Lucila; Kordon, Diana

    2002-12-01

    Argentina has gone through very difficult times during the last years and, in particularly, new kinds of social practices have emerged in order to cope with the crisis. This situation demands and urges a new type of reflection upon the double role of groups, as tools to transform reality and as a way to elaborate those processes regarding subjectivity. In this paper we analyse some topics regarding the groupal field (considering spontaneous groups as well as groupal devices that allow to elaborate the crisis). We consider social bond to be the condition of possibility for the existence of the psyche and of time continuity, and that it also makes possible personal and social elaboration of trauma, crisis and social catastrophe. We develop some aspects of an specific device (the reflection group), which we have already depicted in another moment, showing it's usefulness to cope with social crisis and to promote the subjective elaboration of crisis.

  17. Brand versus generic dispensing trend for ciprofloxacin 500 mg, levofloxacin 500 mg, and moxifloxacin 400 mg (oral dosage forms) among pharmacies of Karachi, Pakistan.

    Science.gov (United States)

    Zehra, Fatima; Naqvi, Atta Abbas; Tasneem, Sumbul; Ahmad, Rizwan; Ahmad, Niyaz; Shamsi, Adnan Zia; Asghar, Naqiya Ali; Khan, Ghufran Ullah

    2017-01-01

    Pakistan spends 0.7% of its gross domestic product on health. The public sector health-care system provides services to 22% of population thus paving the way for a dominant private sector. Patients in Pakistan mostly pay their medical expenses directly, and 64% of the health expenditures are borne by the household. Expenditure on medicine constitutes 43% of the total household expenditure. A quantitative cross-sectional study was conducted in Karachi, Pakistan, for a month. It was aimed at gathering response from different pharmacies to understand the brand versus generic dispensing trend of ciprofloxacin 500 mg, levofloxacin 500 mg, and moxifloxacin 400 mg oral dosage forms. The study employed convenience sampling and used a survey checklist. The data gathered was entered in SPSS version 22. The mean price per tablet for ciprofloxacin brand and generic was reported at Pakistani Rupees (PKR) 48.44 and PKR 26.85, respectively. The trend for dispensing ciprofloxacin highlighted a split in the market between brand (51%) and generic (49%). For levofloxacin brand and generic, the price per tablet was reported at PKR 36.50 and PKR 36.15 respectively, and despite same price, the market was dominated by generic levofloxacin (92%). Due to a price difference between brand and generic moxifloxacin, i.e., PKR 129.44 and PKR 71.91, respectively, the market was mostly occupied by the generic form (75%). Pricing mechanism must be revisited, and the authorities should take stern actions against any illegitimate price hike. The surging burden of drug expenditure on poorer sections of the society must be addressed by the government on an urgent basis.

  18. Permanent magnet with MgB{sub 2} bulk superconductor

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Akiyasu, E-mail: yamamoto@appchem.t.u-tokyo.ac.jp [The University of Tokyo, 7-3-1 Hongo, Bunkyo, Tokyo 113-8656 (Japan); JST-PRESTO, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012 (Japan); Ishihara, Atsushi; Tomita, Masaru [Railway Technical Research Institute, 2-8-38 Hikari, Kokubunji, Tokyo 185-8540 (Japan); Kishio, Kohji [The University of Tokyo, 7-3-1 Hongo, Bunkyo, Tokyo 113-8656 (Japan)

    2014-07-21

    Superconductors with persistent zero-resistance currents serve as permanent magnets for high-field applications requiring a strong and stable magnetic field, such as magnetic resonance imaging. The recent global helium shortage has quickened research into high-temperature superconductors (HTSs)—materials that can be used without conventional liquid-helium cooling to 4.2 K. Herein, we demonstrate that 40-K-class metallic HTS magnesium diboride (MgB{sub 2}) makes an excellent permanent bulk magnet, maintaining 3 T at 20 K for 1 week with an extremely high stability (<0.1 ppm/h). The magnetic field trapped in this magnet is uniformly distributed, as for single-crystalline neodymium-iron-boron. Magnetic hysteresis loop of the MgB{sub 2} permanent bulk magnet was determined. Because MgB{sub 2} is a simple-binary-line compound that does not contain rare-earth metals, polycrystalline bulk material can be industrially fabricated at low cost and with high yield to serve as strong magnets that are compatible with conventional compact cryocoolers, making MgB{sub 2} bulks promising for the next generation of Tesla-class permanent-magnet applications.

  19. Characterization of the microstructure in Mg based alloy

    KAUST Repository

    Kutbee, Arwa T

    2013-01-01

    hardening is essential for age hardenable Mg-based alloys. In this work, microstructural investigation of the Mg–1.4Sn–1.3Zn–0.1Mn (at.%) precipitation system was performed using TEM. The chemical composition of the precipitates was analyzed using EDS. APT

  20. Microwave absorption studies of MgB2 superconductor

    Indian Academy of Sciences (India)

    band (9–. 10 GHz) spectrometer. Both polycrystalline pellet and single-grain MgB2, having nearly the same Tc (∼ 39 K) and same size (3×2×1 mm3), were used in the present investigations. Low field modulated microwave absorption signals ...

  1. Electronic structure and superconductivity of MgB 2

    Indian Academy of Sciences (India)

    Results of ab initio electronic structure calculations on the compound, MgB2, using the FPLAPW method employing GGA for the exchange–correlation energy are presented. Total energy minimization enables us to estimate the equilibrium volume, / ratio and the bulk modulus, all of which are in excellent agreement with ...

  2. Individual Low-Energy Toroidal Dipole State in Mg 24

    Science.gov (United States)

    Nesterenko, V. O.; Repko, A.; Kvasil, J.; Reinhard, P.-G.

    2018-05-01

    The low-energy dipole excitations in Mg 24 are investigated within the Skyrme quasiparticle random phase approximation for axial nuclei. The calculations with the force SLy6 reveal a remarkable feature: the lowest IπK =1-1 excitation (E =7.92 MeV ) in Mg 24 is a vortical toroidal state (TS) representing a specific vortex-antivortex realization of the well-known spherical Hill's vortex in a strongly deformed axial confinement. This is a striking example of an individual TS which can be much more easily discriminated in experiment than the toroidal dipole resonance embracing many states. The TS acquires the lowest energy due to the huge prolate axial deformation in Mg 24 . The result persists for different Skyrme parametrizations (SLy6, SVbas, SkM*). We analyze spectroscopic properties of the TS and its relation with the cluster structure of Mg 24 . Similar TSs could exist in other highly prolate light nuclei. They could serve as promising tests for various reactions to probe a vortical (toroidal) nuclear flow.

  3. The M/G/1 queue with permanent customers

    NARCIS (Netherlands)

    Boxma, O.J.; Cohen, J.W.

    1991-01-01

    The authors examine an M/G/1 FCFS (first come, first served) queue with two types of customers: ordinary customers, who arrive according to a Poisson process, and permanent customers, who immediately return to the end of the queue after having received a service. The influence of the permanent

  4. Laser cladding of Zr on Mg for improved corrosion properties

    International Nuclear Information System (INIS)

    Subramanian, R.; Sircar, S.; Mazumder, J.

    1989-01-01

    This paper reports the results of laser cladding of Mg-2wt%Zr, and Mg-5wt%Zr powder mixture onto magnesium. The microstructure of the laser clad was studied. From the microstructural study, the epitaxial regrowth of the clad region on the underlying substrate was observed. Martensite plates of different size were observed in transmission electron microscope for MG-2wt%Zr and Mg-5wt%Zr laser clad. The corrosion properties of the laser clad were evaluated in sea water (3.5% NaCl). The position of the laser claddings in the galvanic series of metals in sea water, the anodic polarization characteristics of the laser claddings and the protective nature and the stability of the passivating film formed have been determined. The formation of pits on the surface of the laser clad subjected to corrosion is reported. The corrosion properties of the laser claddings are compared with that of the commercially used magnesium alloy AZ91B

  5. Structure and electron-ion correlation in liquid Mg

    Energy Technology Data Exchange (ETDEWEB)

    Tahara, Shuta [Graduate School of Sciences, Kyushu University, 4-2-1 Ropponmatsu Chuo-ku, Fukuoka 810-8560 (Japan); Fujii, Hiroyuki [Graduate School of Sciences, Kyushu University, 4-2-1 Ropponmatsu Chuo-ku, Fukuoka 810-8560 (Japan); Japan Synchrotron Radiation Research Institute, 1-1-1 Kouto Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan); Yokota, Yukinobu [Graduate School of Sciences, Kyushu University, 4-2-1 Ropponmatsu Chuo-ku, Fukuoka 810-8560 (Japan); Kawakita, Yukinobu [Department of Physics, Faculty of Sciences, Kyushu University, 4-2-1 Ropponmatsu Chuo-ku, Fukuoka 810-8560 (Japan); Kohara, Shinji [Japan Synchrotron Radiation Research Institute, 1-1-1 Kouto Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan);