The realization problem for positive and fractional systems
Kaczorek, Tadeusz
2014-01-01
This book addresses the realization problem of positive and fractional continuous-time and discrete-time linear systems. Roughly speaking the essence of the realization problem can be stated as follows: Find the matrices of the state space equations of linear systems for given their transfer matrices. This first book on this topic shows how many well-known classical approaches have been extended to the new classes of positive and fractional linear systems. The modified Gilbert method for multi-input multi-output linear systems, the method for determination of realizations in the controller canonical forms and in observer canonical forms are presented. The realization problem for linear systems described by differential operators, the realization problem in the Weierstrass canonical forms and of the descriptor linear systems for given Markov parameters are addressed. The book also presents a method for the determination of minimal realizations of descriptor linear systems and an extension for cone linear syste...
Experimental realization of the quantum box problem
International Nuclear Information System (INIS)
Resch, K.J.; Lundeen, J.S.; Steinberg, A.M.
2004-01-01
The three-box problem is a gedankenexperiment designed to elucidate some interesting features of quantum measurement and locality. A particle is prepared in a particular superposition of three boxes, and later found in a different (but nonorthogonal) superposition. It was predicted that appropriate 'weak' measurements of particle position in the interval between preparation and post-selection would find the particle in two different places, each with certainty. We verify these predictions in an optical experiment and address the issues of locality and of negative probability
Problems in Systematic Application of Software Metrics and Possible Solution
Rakic, Gordana; Budimac, Zoran
2013-01-01
Systematic application of software metric techniques can lead to significant improvements of the quality of a final software product. However, there is still the evident lack of wider utilization of software metrics techniques and tools due to many reasons. In this paper we investigate some limitations of contemporary software metrics tools and then propose construction of a new tool that would solve some of the problems. We describe the promising prototype, its internal structure, and then f...
Office Skills: Metric Problems in the Typing Classroom
Panagoplos, Nicholas A.
1978-01-01
Discusses problems of metric conversion in the typewriting classroom, as most typewriters have spacing in inches, and shows how to teach students to adjust their typewritten work for this spacing. (MF)
Stochastic inverse problems: Models and metrics
International Nuclear Information System (INIS)
Sabbagh, Elias H.; Sabbagh, Harold A.; Murphy, R. Kim; Aldrin, John C.; Annis, Charles; Knopp, Jeremy S.
2015-01-01
In past work, we introduced model-based inverse methods, and applied them to problems in which the anomaly could be reasonably modeled by simple canonical shapes, such as rectangular solids. In these cases the parameters to be inverted would be length, width and height, as well as the occasional probe lift-off or rotation. We are now developing a formulation that allows more flexibility in modeling complex flaws. The idea consists of expanding the flaw in a sequence of basis functions, and then solving for the expansion coefficients of this sequence, which are modeled as independent random variables, uniformly distributed over their range of values. There are a number of applications of such modeling: 1. Connected cracks and multiple half-moons, which we have noted in a POD set. Ideally we would like to distinguish connected cracks from one long shallow crack. 2. Cracks of irregular profile and shape which have appeared in cold work holes during bolt-hole eddy-current inspection. One side of such cracks is much deeper than other. 3. L or C shaped crack profiles at the surface, examples of which have been seen in bolt-hole cracks. By formulating problems in a stochastic sense, we are able to leverage the stochastic global optimization algorithms in NLSE, which is resident in VIC-3D®, to answer questions of global minimization and to compute confidence bounds using the sensitivity coefficient that we get from NLSE. We will also address the issue of surrogate functions which are used during the inversion process, and how they contribute to the quality of the estimation of the bounds
Stochastic inverse problems: Models and metrics
Sabbagh, Elias H.; Sabbagh, Harold A.; Murphy, R. Kim; Aldrin, John C.; Annis, Charles; Knopp, Jeremy S.
2015-03-01
In past work, we introduced model-based inverse methods, and applied them to problems in which the anomaly could be reasonably modeled by simple canonical shapes, such as rectangular solids. In these cases the parameters to be inverted would be length, width and height, as well as the occasional probe lift-off or rotation. We are now developing a formulation that allows more flexibility in modeling complex flaws. The idea consists of expanding the flaw in a sequence of basis functions, and then solving for the expansion coefficients of this sequence, which are modeled as independent random variables, uniformly distributed over their range of values. There are a number of applications of such modeling: 1. Connected cracks and multiple half-moons, which we have noted in a POD set. Ideally we would like to distinguish connected cracks from one long shallow crack. 2. Cracks of irregular profile and shape which have appeared in cold work holes during bolt-hole eddy-current inspection. One side of such cracks is much deeper than other. 3. L or C shaped crack profiles at the surface, examples of which have been seen in bolt-hole cracks. By formulating problems in a stochastic sense, we are able to leverage the stochastic global optimization algorithms in NLSE, which is resident in VIC-3D®, to answer questions of global minimization and to compute confidence bounds using the sensitivity coefficient that we get from NLSE. We will also address the issue of surrogate functions which are used during the inversion process, and how they contribute to the quality of the estimation of the bounds.
Singularly perturbed hyperbolic problems on metric graphs: asymptotics of solutions
Directory of Open Access Journals (Sweden)
Golovaty Yuriy
2017-04-01
Full Text Available We are interested in the evolution phenomena on star-like networks composed of several branches which vary considerably in physical properties. The initial boundary value problem for singularly perturbed hyperbolic differential equation on a metric graph is studied. The hyperbolic equation becomes degenerate on a part of the graph as a small parameter goes to zero. In addition, the rates of degeneration may differ in different edges of the graph. Using the boundary layer method the complete asymptotic expansions of solutions are constructed and justified.
Conformal changes of metrics and the initial-value problem of general relativity
International Nuclear Information System (INIS)
Mielke, E.W.
1977-01-01
Conformal techniques are reviewed with respect to applications to the initial-value problem of general relativity. Invariant transverse traceless decompositions of tensors, one of its main tools, are related to representations of the group of 'conformeomorphisms' acting on the space of all Riemannian metrics on M. Conformal vector fields, a kernel in the decomposition, are analyzed on compact manifolds with constant scalar curvature. The realization of arbitrary functions as scalar curvature of conformally equivalent metrics, a generalization of Yamabe's (Osaka Math. J.; 12:12 (1960)) conjecture, is applied to the Hamiltonian constraint and to the issue of positive energy of gravitational fields. Various approaches to the solution of the initial-value equations produced by altering the scaling behaviour of the second fundamental form are compared. (author)
Basic formation and realization problems of urban policy
Directory of Open Access Journals (Sweden)
Skiba Alisa Anatol’evna
2014-04-01
Full Text Available The article focuses on the problems that arise in the process of urban development of areas planning, their solutions (improvement and transformation of settlement system, in which case we should base on the new geopolitical situation in the country, the development and modernization of transport and communication infrastructure, where it is necessary to consider both the internal needs of the state and external ones in order to think about possible ways of problem solutions in major cities, as well as the main directions of urban development reforms. The main objectives of the urban development policy are the development of social and economic level of small towns, activities for the conservation of historical, cultural and natural heritage of Russia, the use of modern theories of urban planning, the development of research in this area (both abstract and applied, conducting statistical base of urban development activities. The authors describe the schemes of entry into long-term ownership of land under the current system of urban regulation and the system based on zoning, which acts in real estate market conditions. Among other things, the article offers an idea of the method of socio-controlled planning, which supposes the development plans of the city's buildings and areas, different urban systems (based on the analysis of the existing problems and the needs that must be met.
Using metrics in stability of stochastic programming problems
Czech Academy of Sciences Publication Activity Database
Houda, Michal
2005-01-01
Roč. 13, č. 1 (2005), s. 128-134 ISSN 0572-3043 R&D Projects: GA ČR(CZ) GA402/04/1294 Institutional research plan: CEZ:AV0Z10750506 Keywords : stochastic programming * quantitative stability * Wasserstein metrics * Kolmogorov metrics * simulation study Subject RIV: BB - Applied Statistics, Operational Research
Open Problem: Kernel methods on manifolds and metric spaces
DEFF Research Database (Denmark)
Feragen, Aasa; Hauberg, Søren
2016-01-01
Radial kernels are well-suited for machine learning over general geodesic metric spaces, where pairwise distances are often the only computable quantity available. We have recently shown that geodesic exponential kernels are only positive definite for all bandwidths when the input space has strong...... linear properties. This negative result hints that radial kernel are perhaps not suitable over geodesic metric spaces after all. Here, however, we present evidence that large intervals of bandwidths exist where geodesic exponential kernels have high probability of being positive definite over finite...... datasets, while still having significant predictive power. From this we formulate conjectures on the probability of a positive definite kernel matrix for a finite random sample, depending on the geometry of the data space and the spread of the sample....
Directory of Open Access Journals (Sweden)
E.B. Ponomarenko
2015-12-01
Full Text Available The article is dedicated to the research of the basic problems of organization and realization of budgetary process in the country on the modern stage. A budgetary process is one of the main levers which is able really to provide management of an economy under conditions of a market economy. Organizational and administrative structures of the budgetary process are ineffective in Ukraine. In spite of more than twenty-year old history, the budgetary process of Ukraine has the row of unsolved problems. For this reason there is the necessity in deep theoretical rethinking and methodological work at approaches to the budgetary process. We consider it is wise to find out the basic problems which arise during organization and realization of the budgetary process in Ukraine. The study of the matter results in the complex of recommendations which are able to provide effective realization of the budgetary process in Ukraine and solve a number of problem questions.
Directory of Open Access Journals (Sweden)
Patimat Alieva
2012-01-01
Full Text Available The article is devoted to the consideration and analysis of the main problems, concerning the realization of socially vulnerable groups' of the population potential. The problem of women and youth employment development takes on a special acuteness and actualite in the outlying district with a labour redundant labour market.
Problems of Realization Women’s Right to Policy in the Republic of Kazakhstan
Directory of Open Access Journals (Sweden)
Tanalinova A. U.
2012-11-01
Full Text Available The article considers the problems of realization women’s right to policy in the Republic of Kazakhstan. The author reviews the different methods of political quota, which are used in some countries of the world. Besides that the author reveals the reasons of the women’s low political activity in Kazakhstan
Directory of Open Access Journals (Sweden)
Ольга Александровна Прусакова
2012-03-01
Full Text Available Within the framework of modern pedagogy and educational practice there have been worked out and realized various theoretical conceptions, theories, educational approaches including humanistic, personality-oriented, activity-oriented, competence-oriented. One of such approaches to education and personality development is the problem-solving approach.
Realizing all reduced syzygy sequences in the planar three-body problem
International Nuclear Information System (INIS)
Moeckel, Richard; Montgomery, Richard
2015-01-01
The configuration space of the planar three-body problem, reduced by rotations and with collisions excluded, has a rich topology which supports a large set of free homotopy classes. These classes have a simple description in terms of syzygy (or eclipse) sequences. Each homotopy class corresponds to a unique ‘reduced’ syzygy sequence. We prove that each reduced syzygy sequence is realized by a periodic solution of the rotation-reduced Newtonian planar three-body problem. The realizing solutions have small, nonzero angular momentum, repeatedly come very close to triple collision, and have lots of ‘stutters’—repeated syzygies of the same type, which cancel out up to homotopy. The heart of the proof stems from the work by one of us on symbolic dynamics arising out of the central configurations after the triple collision is blown up using McGehee's method. We end with a list of open problems. (paper)
On the problem of model reduction in the gap metric
Mutsaers, M.E.C.; Weiland, S.
2010-01-01
This paper deals with the model reduction problem where, for a given linear time-invariant dynamical system of complexity n, a simpler system of complexity r
The Problems of Realizing the Innovative Potential of Science and Mechanisms for their Solution
Directory of Open Access Journals (Sweden)
Ianchenko Zinayida B.
2017-06-01
Full Text Available The aim of the article is revealing reasons for the low payoff of science in terms of the effectiveness of the research activity and demand for its results in economic spheres, identifying problems in the innovation activity of research institutions and reasons for their arising, searching for fundamental approaches to the development of a strategy and mechanisms for realization of the innovative potential of science to strengthen its position in the real sector. The study used general scientific methods, including: systems approach — to systematize the problems of the innovation activity of research institutions; methods of theoretical generalization — to study the theoretical principles of the scientific and innovation activity; methods of analysis and synthesis — to search for fundamental approaches to the development of mechanisms for realization of the innovative potential of science. The used concepts of scientific activity and innovations are generalized. The author’s definition of the term “innovation” is proposed. The main reasons of the minor impact of science on the economy are systematized, the mechanisms for their elimination are offered. Based on the comprehensive analysis of the reasons for losing by science its impact on the economy, the ways of realizing the innovative potential of science are improved. The results of the research can be used in reforming domestic scientific research institutions.
Quantum learning of classical stochastic processes: The completely positive realization problem
Monràs, Alex; Winter, Andreas
2016-01-01
Among several tasks in Machine Learning, a specially important one is the problem of inferring the latent variables of a system and their causal relations with the observed behavior. A paradigmatic instance of this is the task of inferring the hidden Markov model underlying a given stochastic process. This is known as the positive realization problem (PRP), [L. Benvenuti and L. Farina, IEEE Trans. Autom. Control 49(5), 651-664 (2004)] and constitutes a central problem in machine learning. The PRP and its solutions have far-reaching consequences in many areas of systems and control theory, and is nowadays an important piece in the broad field of positive systems theory. We consider the scenario where the latent variables are quantum (i.e., quantum states of a finite-dimensional system) and the system dynamics is constrained only by physical transformations on the quantum system. The observable dynamics is then described by a quantum instrument, and the task is to determine which quantum instrument — if any — yields the process at hand by iterative application. We take as a starting point the theory of quasi-realizations, whence a description of the dynamics of the process is given in terms of linear maps on state vectors and probabilities are given by linear functionals on the state vectors. This description, despite its remarkable resemblance with the hidden Markov model, or the iterated quantum instrument, is however devoid of any stochastic or quantum mechanical interpretation, as said maps fail to satisfy any positivity conditions. The completely positive realization problem then consists in determining whether an equivalent quantum mechanical description of the same process exists. We generalize some key results of stochastic realization theory, and show that the problem has deep connections with operator systems theory, giving possible insight to the lifting problem in quotient operator systems. Our results have potential applications in quantum machine
Quantum learning of classical stochastic processes: The completely positive realization problem
Energy Technology Data Exchange (ETDEWEB)
Monràs, Alex [Física Teòrica: Informació i Fenòmens Quàntics, Universitat Autònoma de Barcelona, 08193 Bellaterra (Barcelona) (Spain); Centre for Quantum Technologies, National University of Singapore, 3 Science Drive 2, Singapore 117543 (Singapore); Winter, Andreas [Física Teòrica: Informació i Fenòmens Quàntics, Universitat Autònoma de Barcelona, 08193 Bellaterra (Barcelona) (Spain); Centre for Quantum Technologies, National University of Singapore, 3 Science Drive 2, Singapore 117543 (Singapore); ICREA—Institució Catalana de Recerca i Estudis Avançats, Pg. Lluis Companys, 23, 08010 Barcelona (Spain)
2016-01-15
Among several tasks in Machine Learning, a specially important one is the problem of inferring the latent variables of a system and their causal relations with the observed behavior. A paradigmatic instance of this is the task of inferring the hidden Markov model underlying a given stochastic process. This is known as the positive realization problem (PRP), [L. Benvenuti and L. Farina, IEEE Trans. Autom. Control 49(5), 651–664 (2004)] and constitutes a central problem in machine learning. The PRP and its solutions have far-reaching consequences in many areas of systems and control theory, and is nowadays an important piece in the broad field of positive systems theory. We consider the scenario where the latent variables are quantum (i.e., quantum states of a finite-dimensional system) and the system dynamics is constrained only by physical transformations on the quantum system. The observable dynamics is then described by a quantum instrument, and the task is to determine which quantum instrument — if any — yields the process at hand by iterative application. We take as a starting point the theory of quasi-realizations, whence a description of the dynamics of the process is given in terms of linear maps on state vectors and probabilities are given by linear functionals on the state vectors. This description, despite its remarkable resemblance with the hidden Markov model, or the iterated quantum instrument, is however devoid of any stochastic or quantum mechanical interpretation, as said maps fail to satisfy any positivity conditions. The completely positive realization problem then consists in determining whether an equivalent quantum mechanical description of the same process exists. We generalize some key results of stochastic realization theory, and show that the problem has deep connections with operator systems theory, giving possible insight to the lifting problem in quotient operator systems. Our results have potential applications in quantum machine
Quantum learning of classical stochastic processes: The completely positive realization problem
International Nuclear Information System (INIS)
Monràs, Alex; Winter, Andreas
2016-01-01
Among several tasks in Machine Learning, a specially important one is the problem of inferring the latent variables of a system and their causal relations with the observed behavior. A paradigmatic instance of this is the task of inferring the hidden Markov model underlying a given stochastic process. This is known as the positive realization problem (PRP), [L. Benvenuti and L. Farina, IEEE Trans. Autom. Control 49(5), 651–664 (2004)] and constitutes a central problem in machine learning. The PRP and its solutions have far-reaching consequences in many areas of systems and control theory, and is nowadays an important piece in the broad field of positive systems theory. We consider the scenario where the latent variables are quantum (i.e., quantum states of a finite-dimensional system) and the system dynamics is constrained only by physical transformations on the quantum system. The observable dynamics is then described by a quantum instrument, and the task is to determine which quantum instrument — if any — yields the process at hand by iterative application. We take as a starting point the theory of quasi-realizations, whence a description of the dynamics of the process is given in terms of linear maps on state vectors and probabilities are given by linear functionals on the state vectors. This description, despite its remarkable resemblance with the hidden Markov model, or the iterated quantum instrument, is however devoid of any stochastic or quantum mechanical interpretation, as said maps fail to satisfy any positivity conditions. The completely positive realization problem then consists in determining whether an equivalent quantum mechanical description of the same process exists. We generalize some key results of stochastic realization theory, and show that the problem has deep connections with operator systems theory, giving possible insight to the lifting problem in quotient operator systems. Our results have potential applications in quantum machine
The approximation gap for the metric facility location problem is not yet closed
Byrka, J.; Aardal, K.I.
2007-01-01
We consider the 1.52-approximation algorithm of Mahdian et al. for the metric uncapacitated facility location problem. We show that their algorithm does not close the gap with the lower bound on approximability, 1.463, by providing a construction of instances for which its approximation ratio is not
Realization of Anisotropic Diamagnetic Kepler Problem in a Solid State Environment
International Nuclear Information System (INIS)
Chen Zhanghai; Zhou Weihang; Zhang Bo; Yu, C. H.; Zhu Jingbing; Lu Wei; Shen, S. C.
2009-01-01
The anisotropic diamagnetic Kepler problem (ADKP) is realized experimentally by the orbital electrons of a P donor in Si under magnetic fields. The interference of electron wave packets which leads to quasi-Landau resonances (QLR) were observed. Applying the closed-orbit theory to an anisotropic solid state environment, we have identified orbits responsible for the QLR manifesting the quantum chaotic behavior in Rydberg atoms. The excellent consistency between the measured spectra and theoretical calculation provides unambiguous evidence of quantum chaotic dynamics of electrons in the ADKP.
Experimental realization of a one-way quantum computer algorithm solving Simon's problem.
Tame, M S; Bell, B A; Di Franco, C; Wadsworth, W J; Rarity, J G
2014-11-14
We report an experimental demonstration of a one-way implementation of a quantum algorithm solving Simon's problem-a black-box period-finding problem that has an exponential gap between the classical and quantum runtime. Using an all-optical setup and modifying the bases of single-qubit measurements on a five-qubit cluster state, key representative functions of the logical two-qubit version's black box can be queried and solved. To the best of our knowledge, this work represents the first experimental realization of the quantum algorithm solving Simon's problem. The experimental results are in excellent agreement with the theoretical model, demonstrating the successful performance of the algorithm. With a view to scaling up to larger numbers of qubits, we analyze the resource requirements for an n-qubit version. This work helps highlight how one-way quantum computing provides a practical route to experimentally investigating the quantum-classical gap in the query complexity model.
Problems of realization of the rights of victims of crimes to compensation by the state
Directory of Open Access Journals (Sweden)
Н. А. Хмельова
2015-05-01
Full Text Available Problem setting: consider the problems of realization of the rights of victims of crime persons to compensation by the State under the laws of Ukraine. To analyze the current civil legislation of Ukraine, to consider the legislation of the countries in terms of state compensation for damages caused to the victim crime. Suggest a mechanism to implement them. Recent research and publications analysis: some aspects of state compensation for harm caused to the victim crime investigated by many scientists. Thus, O. Vedernikova, O. Kuchinska, A. Mazalov, V. Sawickiy in his scientific studies have concentrated on the investigation of the creation of a state fund damages caused offense. R. Abramovich’s work explored the issue of compensation to the victim harm caused by crime as a legal obligation of the State on the basis of mutual responsibility of the citizen to the state and the state before a national. D. Plachkov investigated features of state obligations arising from causing offense, the specific legal solution of the relations in Ukraine. Paper objective: identifying challenges the rights of victims of crime persons to compensation by the state will set features the state’s obligations arising from causing crime and identify ways to improve the legal regulation of the relations in Ukraine. Paper main body: the current civil legislation of Ukraine stipulates the right of victims of criminal offenses on the restoration of rights violations. But there are cases where recovery is impossible. The reasons for this is that, first, is guilty of a criminal offense a person is insolvent, and the actual recovery of funds it usually extends over many years and is irregular. Secondly, the problem relates stopped criminal proceedings in which a person has committed a criminal offense is not established and the victim is deprived of right to file a civil action. Thirdly, the remedy is not possible victims in unsolved criminal offenses, such as when a
Realizing nanographene activated by a vacancy to solve hydrogen storage problem
Sunnardianto, Gagus Ketut; Maruyama, Isao; Kusakabe, Koichi
We found a triply hydrogenated vacancy (V111) in nanographene reduces an activation barrier of adsorption-desorption process in both ways in an equal manner from the known values for pristine graphene as well as those of other hydrogenated vacancies of graphene. This finding may give a key to overcome existing problems in the hydrogen uptake and release processes in known hydrogen storage materials, e.g. graphene and organic hydrides (OHs) in near ambient operation temperature. In this study, we used DFT-NEB simulation to estimate the barrier height, which is supported by realized real experiments. We consider a nanographene molecule (VANG) which contains V111 with armchair structure at the periphery. We found interesting feature in comparable values of energy barriers for both hydrogen uptake and release, where hydrogenation process is even a little bit endothermic and dehydrogenation is a little but exothermic nature. Thus, this material structure acts as ``self-catalytic properties'', which has an important role in reducing an energy barrier and as a trapping site for hydrogen serving a new material prevailing other hopeful candidates. The work is supported by JSPS KAKENHI in Science of Atomic Layers\\x9D.
Visibility-Based Goal Oriented Metrics and Application to Navigation and Path Planning Problems
2017-12-14
Oriented Metrics and Application to Navigation and Path Planning Problems Report Term: 0-Other Email : ytsai@math.utexas.edu Distribution Statement: 1...error bounds that we have obtained. Report Date: 06-Dec-2017 INVESTIGATOR(S): Phone Number: 5122327757 Principal: Y Name: Yen-Hsi Tsai Email ...w1 w2 ◆ and ~z = ✓ z1 z2 ◆ . Then we can write D0 h (PN (xi,j)) = Rp (R+⌘)2+h2 + 1 2h (µ2w1 µ2z1) 0 µ2w2µ3z2 2h 0 ! . It follows that the non
McCoy, Allison B; Wright, Adam; Rogith, Deevakar; Fathiamini, Safa; Ottenbacher, Allison J; Sittig, Dean F
2014-04-01
Correlation of data within electronic health records is necessary for implementation of various clinical decision support functions, including patient summarization. A key type of correlation is linking medications to clinical problems; while some databases of problem-medication links are available, they are not robust and depend on problems and medications being encoded in particular terminologies. Crowdsourcing represents one approach to generating robust knowledge bases across a variety of terminologies, but more sophisticated approaches are necessary to improve accuracy and reduce manual data review requirements. We sought to develop and evaluate a clinician reputation metric to facilitate the identification of appropriate problem-medication pairs through crowdsourcing without requiring extensive manual review. We retrieved medications from our clinical data warehouse that had been prescribed and manually linked to one or more problems by clinicians during e-prescribing between June 1, 2010 and May 31, 2011. We identified measures likely to be associated with the percentage of accurate problem-medication links made by clinicians. Using logistic regression, we created a metric for identifying clinicians who had made greater than or equal to 95% appropriate links. We evaluated the accuracy of the approach by comparing links made by those physicians identified as having appropriate links to a previously manually validated subset of problem-medication pairs. Of 867 clinicians who asserted a total of 237,748 problem-medication links during the study period, 125 had a reputation metric that predicted the percentage of appropriate links greater than or equal to 95%. These clinicians asserted a total of 2464 linked problem-medication pairs (983 distinct pairs). Compared to a previously validated set of problem-medication pairs, the reputation metric achieved a specificity of 99.5% and marginally improved the sensitivity of previously described knowledge bases. A
Legal Problems of Realization of the Principle of “Good Faith” in the Course of Bankruptcy
Directory of Open Access Journals (Sweden)
Yuliya V. Sakharova
2017-05-01
Full Text Available This article is about research problems of realization of the principle of conscientiousness in relation to procedures of insolvency (bankruptcy. The Author considers problems of determination of category “conscientiousness”, the questions of criteria to determine the good faith of the trustee, the criteria of “sufficiency” in his actions, good faith in complying with the statute of limitations in the procedures of bankruptcy, as well as violation of the principle of good faith with the liquidator failure to take appropriate action to challenge the debtor's contracts.
On Advice Complexity of the k-server Problem under Sparse Metrics
DEFF Research Database (Denmark)
Gupta, S.; Kamali, S.; López-Ortiz, A.
2013-01-01
O (n(log μ +log logN)) bits of advice. Among other results, this gives a 3-competitive algorithm for planar graphs, provided with O (n log log N) bits of advice. On the other side, we show that an advice of size Ω (n) is required to obtain a 1-competitive algorithm for sequences of size n even......We consider the k-Server problem under the advice model of computation when the underlying metric space is sparse. On one side, we introduce Θ (1)-competitive algorithms for a wide range of sparse graphs, which require advice of (almost) linear size. Namely, we show that for graphs of size N...... and treewidth α, there is an online algorithm which receives O (n(log α +log log N))1 bits of advice and optimally serves a sequence of length n. With a different argument, we show that if a graph admits a system of μ collective tree (q, r)- spanners, then there is a (q + r)-competitive algorithm which receives...
On the general principles and problems of realization of gasers (gamma-lasers)
International Nuclear Information System (INIS)
Gol'danskij, V.I.; Kagan, Yu.
1975-01-01
An attempt is presented to formulate main principles behind induced generation of gamma quanta and to prove that the requirements thereof are consistent with actual physical parameters. The problems are discussed of constructing the so-called gasers, i.e. lasers operated by gamma transitions, and of their possible applications. (L.O.)
International Nuclear Information System (INIS)
Badalov, S.A.; Filippov, G.F.
1983-01-01
All the basic calculation formulas of an algebraic version of the resonating-group method for a pultichannel problem of the scattering of a nucleon by 7 Li and 7 Be taking into account α+α channel are derived. The spin-orbital and the Coulomb interactions are taken into consideration. The procedure enabling an exact projection into the states with the given values of the channel quantum numbers is proposed
The leakage problem in vacuum system. Realization of a mass spectrometer detecting leaks
International Nuclear Information System (INIS)
Geller, R.
1954-11-01
In the first part of this paper we consider the problem of leaks in vacuum systems, and their detection. We consider in particular the method of detection by means of a helium spectrometer. The second part deals with the experimental set p. The analyser and the ion source have been studied in great detail, and we have also discussed the technological and mechanical aspects of the apparatus and its performances. (author) [fr
On the Use of Software Metrics as a Predictor of Software Security Problems
2013-01-01
models to determine if additional metrics are required to increase the accuracy of the model: non-security SCSA warnings, code churn and size, the...vulnerabilities reported by testing and those found in the field. Summary of Most Important Results We evaluated our model on three commercial telecommunications
Directory of Open Access Journals (Sweden)
Magnolia Tilca
2014-10-01
Full Text Available The aim of this paper is to study the existence of the solution for the overlapping generations model, using fixed point theorems in metric spaces endowed with a graph. The overlapping generations model has been introduced and developed by Maurice Allais (1947, Paul Samuelson (1958, Peter Diamond (1965 and so on. The present paper treats the case presented by Edmond (2008 in (Edmond, 2008 for a continuous time. The theorem of existence of the solution for the prices fixed point problem derived from the overlapping generations model gives an approximation of the solution via the graph theory. The tools employed in this study are based on applications of the Jachymski fixed point theorem on metric spaces endowed with a graph (Jachymski, 2008
International Nuclear Information System (INIS)
Kowsary, F.; Pooladvand, K.; Pourshaghaghy, A.
2007-01-01
In this paper, an appropriate distribution of the heating elements' strengths in a radiation furnace is estimated using inverse methods so that a pre-specified temperature and heat flux distribution is attained on the design surface. Minimization of the sum of the squares of the error function is performed using the variable metric method (VMM), and the results are compared with those obtained by the conjugate gradient method (CGM) established previously in the literature. It is shown via test cases and a well-founded validation procedure that the VMM, when using a 'regularized' estimator, is more accurate and is able to reach at a higher quality final solution as compared to the CGM. The test cases used in this study were two-dimensional furnaces filled with an absorbing, emitting, and scattering gas
Some philosophical problems with the space-time metric and alternative theories of gravitation
International Nuclear Information System (INIS)
Bergh, N. van den
1983-01-01
Some problems in Synge's chronometric approach and the geodesic method of EHLERS, PIRANI and SCHILD are discussed. We construct a particular type of standard clock which does not suffer from the usual difficulties with atomic clocks and which enables us to analyse the old problem whether atomic time is identical with proper time. We conclude that a non-constant coupling between our Heisenberg units and the geodesic units leads to conflicts with astronomical observations. Therefore the question whether particle masses are varying can only be stated in the Planck unit system. (author)
Directory of Open Access Journals (Sweden)
Kihong Kim
2018-02-01
Full Text Available Various kinds of metrics used for the quantitative evaluation of scholarly journals are reviewed. The impact factor and related metrics including the immediacy index and the aggregate impact factor, which are provided by the Journal Citation Reports, are explained in detail. The Eigenfactor score and the article influence score are also reviewed. In addition, journal metrics such as CiteScore, Source Normalized Impact per Paper, SCImago Journal Rank, h-index, and g-index are discussed. Limitations and problems that these metrics have are pointed out. We should be cautious to rely on those quantitative measures too much when we evaluate journals or researchers.
Directory of Open Access Journals (Sweden)
Ishak Altun
2016-01-01
Full Text Available We provide sufficient conditions for the existence of a unique common fixed point for a pair of mappings T,S:X→X, where X is a nonempty set endowed with a certain metric. Moreover, a numerical algorithm is presented in order to approximate such solution. Our approach is different to the usual used methods in the literature.
Holographic Spherically Symmetric Metrics
Petri, Michael
The holographic principle (HP) conjectures, that the maximum number of degrees of freedom of any realistic physical system is proportional to the system's boundary area. The HP has its roots in the study of black holes. It has recently been applied to cosmological solutions. In this article we apply the HP to spherically symmetric static space-times. We find that any regular spherically symmetric object saturating the HP is subject to tight constraints on the (interior) metric, energy-density, temperature and entropy-density. Whenever gravity can be described by a metric theory, gravity is macroscopically scale invariant and the laws of thermodynamics hold locally and globally, the (interior) metric of a regular holographic object is uniquely determined up to a constant factor and the interior matter-state must follow well defined scaling relations. When the metric theory of gravity is general relativity, the interior matter has an overall string equation of state (EOS) and a unique total energy-density. Thus the holographic metric derived in this article can serve as simple interior 4D realization of Mathur's string fuzzball proposal. Some properties of the holographic metric and its possible experimental verification are discussed. The geodesics of the holographic metric describe an isotropically expanding (or contracting) universe with a nearly homogeneous matter-distribution within the local Hubble volume. Due to the overall string EOS the active gravitational mass-density is zero, resulting in a coasting expansion with Ht = 1, which is compatible with the recent GRB-data.
Sharp metric obstructions for quasi-Einstein metrics
Case, Jeffrey S.
2013-02-01
Using the tractor calculus to study smooth metric measure spaces, we adapt results of Gover and Nurowski to give sharp metric obstructions to the existence of quasi-Einstein metrics on suitably generic manifolds. We do this by introducing an analogue of the Weyl tractor W to the setting of smooth metric measure spaces. The obstructions we obtain can be realized as tensorial invariants which are polynomial in the Riemann curvature tensor and its divergence. By taking suitable limits of their tensorial forms, we then find obstructions to the existence of static potentials, generalizing to higher dimensions a result of Bartnik and Tod, and to the existence of potentials for gradient Ricci solitons.
Hu, Bo; Kalfoglou, Yannis; Dupplaw, David; Alani, Harith; Lewis, Paul; Shadbolt, Nigel
2006-01-01
In the context of the Semantic Web, many ontology-related operations, e.g. ontology ranking, segmentation, alignment, articulation, reuse, evaluation, can be boiled down to one fundamental operation: computing the similarity and/or dissimilarity among ontological entities, and in some cases among ontologies themselves. In this paper, we review standard metrics for computing distance measures and we propose a series of semantic metrics. We give a formal account of semantic metrics drawn from a...
Sustainability Metrics: The San Luis Basin Project
Sustainability is about promoting humanly desirable dynamic regimes of the environment. Metrics: ecological footprint, net regional product, exergy, emergy, and Fisher Information. Adaptive management: (1) metrics assess problem, (2) specific problem identified, and (3) managemen...
Bellet, Aurelien; Sebban, Marc
2015-01-01
Similarity between objects plays an important role in both human cognitive processes and artificial systems for recognition and categorization. How to appropriately measure such similarities for a given task is crucial to the performance of many machine learning, pattern recognition and data mining methods. This book is devoted to metric learning, a set of techniques to automatically learn similarity and distance functions from data that has attracted a lot of interest in machine learning and related fields in the past ten years. In this book, we provide a thorough review of the metric learnin
International Nuclear Information System (INIS)
Harper, A.F.A.; Digby, R.B.; Thong, S.P.; Lacey, F.
1978-04-01
In April 1978 a meeting of senior metrication officers convened by the Commonwealth Science Council of the Commonwealth Secretariat, was held in London. The participants were drawn from Australia, Bangladesh, Britain, Canada, Ghana, Guyana, India, Jamaica, Papua New Guinea, Solomon Islands and Trinidad and Tobago. Among other things, the meeting resolved to develop a set of guidelines to assist countries to change to SI and to compile such guidelines in the form of a working manual
Energy Technology Data Exchange (ETDEWEB)
Frye, Jason Neal; Veitch, Cynthia K.; Mateski, Mark Elliot; Michalski, John T.; Harris, James Mark; Trevino, Cassandra M.; Maruoka, Scott
2012-03-01
Threats are generally much easier to list than to describe, and much easier to describe than to measure. As a result, many organizations list threats. Fewer describe them in useful terms, and still fewer measure them in meaningful ways. This is particularly true in the dynamic and nebulous domain of cyber threats - a domain that tends to resist easy measurement and, in some cases, appears to defy any measurement. We believe the problem is tractable. In this report we describe threat metrics and models for characterizing threats consistently and unambiguously. The purpose of this report is to support the Operational Threat Assessment (OTA) phase of risk and vulnerability assessment. To this end, we focus on the task of characterizing cyber threats using consistent threat metrics and models. In particular, we address threat metrics and models for describing malicious cyber threats to US FCEB agencies and systems.
Finite Metric Spaces of Strictly negative Type
DEFF Research Database (Denmark)
Hjorth, Poul G.
If a finite metric space is of strictly negative type then its transfinite diameter is uniquely realized by an infinite extent (“load vector''). Finite metric spaces that have this property include all trees, and all finite subspaces of Euclidean and Hyperbolic spaces. We prove that if the distance...
Directory of Open Access Journals (Sweden)
Alexander Chuklin
2017-01-01
Full Text Available The subject. The article focuses on the need to improve legislative and law enforcement activities related to the consolidation of constituent entities of the Russian Federation additional guarantees of realization of constitutional human and civil rights and freedoms.The purpose of the article is to identify main ways of improvement the legal regulation additional guarantees of realization of constitutional human and civil rights and freedoms by the constituent entities of the Russian Federation.The methodology. The author uses a dialectical method, a method of analysis and synthesis, a formal legal method.The results and scope of application. The lack of unity in understanding the essence of additional guarantees of realization of rights and freedoms requires not only theoretical analysis of this legal category, but a consistent system of the legislation, and corresponding to the system of law enforcement practice. The legal establishment of the additional guarantees of realization of constitutional human and civil rights and freedoms, due solely to the will of the legislator of a constituent entitiy of the Russian Federation aimed at the concretization of constitutional rights and freedoms as well as of the security mechanisms (legal conditions, means of the implementation of these rights. Features of development of the corresponding constituent entitiy of the Russian Federation should be taken into account.One of the main directions of improvement of legal regulation in this field is legislative recognition of additional guarantees of realization of constitutional human and civil rights and freedoms established by the constituent entities of the Russian Federation. This concept should be reflected in the Federal law of October 6, 1999 No. 184-FZ "On General principles of organization of legislative (representative and executive bodies of state power of constituent entities of the Russian Federation", as well as in the constitutions (charters
Shih, Joanna H; Greer, Matthew D; Turkbey, Baris
2018-03-16
To point out the problems with Cohen kappa statistic and to explore alternative metrics to determine interobserver agreement on lesion detection when locations are not prespecified. Use of kappa and two alternative methods, namely index of specific agreement (ISA) and modified kappa, for measuring interobserver agreement on the location of detected lesions are presented. These indices of agreement are illustrated by application to a retrospective multireader study in which nine readers detected and scored prostate cancer lesions in 163 consecutive patients (n = 110 cases, n = 53 controls) using the guideline of Prostate Imaging Reporting and Data System version 2 on multiparametric magnetic resonance imaging. The proposed modified kappa, which properly corrects for the amount of agreement by chance, is shown to be approximately equivalent to the ISA. In the prostate cancer data, average kappa, modified kappa, and ISA equaled 30%, 55%, and 57%, respectively, for all lesions and 20%, 87%, and 87%, respectively, for index lesions. The application of kappa could result in a substantial downward bias in reader agreement on lesion detection when locations are not prespecified. ISA is recommended for assessment of reader agreement on lesion detection. Published by Elsevier Inc.
The acoustic realization of metrical structure by FO maxima
Terken, J.M.B.; Collier, R.P.G.
1991-01-01
An investigation was performed to determine whether the scaling of F0 maxima is sensitive to syntactic properties of sentences. Seventy sentences were read aloud by a professional speaker. They all had the same basic structure: NP–VP. Variations of the basic scheme were obtained by adding lexical
On characterizations of quasi-metric completeness
Energy Technology Data Exchange (ETDEWEB)
Dag, H.; Romaguera, S.; Tirado, P.
2017-07-01
Hu proved in [4] that a metric space (X, d) is complete if and only if for any closed subspace C of (X, d), every Banach contraction on C has fixed point. Since then several authors have investigated the problem of characterizing the metric completeness by means of fixed point theorems. Recently this problem has been studied in the more general context of quasi-metric spaces for different notions of completeness. Here we present a characterization of a kind of completeness for quasi-metric spaces by means of a quasi-metric versions of Hu’s theorem. (Author)
Issues in Benchmark Metric Selection
Crolotte, Alain
It is true that a metric can influence a benchmark but will esoteric metrics create more problems than they will solve? We answer this question affirmatively by examining the case of the TPC-D metric which used the much debated geometric mean for the single-stream test. We will show how a simple choice influenced the benchmark and its conduct and, to some extent, DBMS development. After examining other alternatives our conclusion is that the “real” measure for a decision-support benchmark is the arithmetic mean.
Background metric in supergravity theories
International Nuclear Information System (INIS)
Yoneya, T.
1978-01-01
In supergravity theories, we investigate the conformal anomaly of the path-integral determinant and the problem of fermion zero modes in the presence of a nontrivial background metric. Except in SO(3) -invariant supergravity, there are nonvanishing conformal anomalies. As a consequence, amplitudes around the nontrivial background metric contain unpredictable arbitrariness. The fermion zero modes which are explicitly constructed for the Euclidean Schwarzschild metric are interpreted as an indication of the supersymmetric multiplet structure of a black hole. The degree of degeneracy of a black hole is 2/sup 4n/ in SO(n) supergravity
International Nuclear Information System (INIS)
Puzynin, I.V.; Puzynina, T.P.; Tkhak, V.Ch.
2010-01-01
SLIPM (Sturm-LIouville Problem in MAPLE) is a program complex written in the language of the computer algebras system MAPLE. It consists of the main program SLIPM.mw and of some procedures. It is intended for a numerical solution with the help of the continuous analog of Newton's method (CANM) of Sturm-Liouville partial problems, i.e. for calculating some eigenvalue of linear second-order differential operator and a corresponding eigenfunction satisfying homogeneous boundary conditions of the general type. SLIPM is the development of the program complexes SLIP1 and SLIPH4 written in the Fortran language. It is added by two new ways of calculating the initial value of iterative parameter τ 0 , by a procedure for calculating a higher precision solution (eigenvalue and corresponding eigenfunction) with the help of Richardson's extrapolation method, by graphical visualization procedures of intermediate and final results of the iterative process and by saving of the results on a disk file. The descriptions of the procedures purposes and their parameters are given
Realizability: a historical essay
Oosten, J. van
2000-01-01
The purpose of this short paper is to sketch the development of a few basic topics in the history of Realizability The number of topics is quite limited and reects very much my own personal taste biases and prejudices Realizability has over the past years developed into a subject of such dimensions
D.E. Allen (David); M.J. McAleer (Michael); M. Scharth (Marcel)
2013-01-01
textabstractIn this paper we document that realized variation measures constructed from highfrequency returns reveal a large degree of volatility risk in stock and index returns, where we characterize volatility risk by the extent to which forecasting errors in realized volatility are substantive.
Asymmetric Realized Volatility Risk
D.E. Allen (David); M.J. McAleer (Michael); M. Scharth (Marcel)
2014-01-01
markdownabstract__Abstract__ In this paper we document that realized variation measures constructed from high-frequency returns reveal a large degree of volatility risk in stock and index returns, where we characterize volatility risk by the extent to which forecasting errors in realized
Directory of Open Access Journals (Sweden)
Pavese Franco
2016-01-01
Full Text Available The paper, after a short introduction to measurement units in general and to the present international system of units (SI: Système International des Unités, deals with a digest of the basics of the proposed new SI:2018 and of its differences compared with the present SI. The latter issue also involves a review of some problems still unresolved in the last draft, concerning: the role of the constants of physics in the system and their role in the conceptual construction of this international standard; the method employed for using the relevant experimental data, and related statistical issues; finally, the implications for science of the New SI implementation. The consequences for and new duties of the national metrology institutes and practitioners are illustrated, involving the future conformity of the present standards and a possible hierarchy between countries that would result from the new definition, in contrast with certain principles of the Convention du Mètre.
International Nuclear Information System (INIS)
Ma Zhihao; Chen Jingling
2011-01-01
In this work we study metrics of quantum states, which are natural generalizations of the usual trace metric and Bures metric. Some useful properties of the metrics are proved, such as the joint convexity and contractivity under quantum operations. Our result has a potential application in studying the geometry of quantum states as well as the entanglement detection.
Asymmetric Realized Volatility Risk
Directory of Open Access Journals (Sweden)
David E. Allen
2014-06-01
Full Text Available In this paper, we document that realized variation measures constructed from high-frequency returns reveal a large degree of volatility risk in stock and index returns, where we characterize volatility risk by the extent to which forecasting errors in realized volatility are substantive. Even though returns standardized by ex post quadratic variation measures are nearly Gaussian, this unpredictability brings considerably more uncertainty to the empirically relevant ex ante distribution of returns. Explicitly modeling this volatility risk is fundamental. We propose a dually asymmetric realized volatility model, which incorporates the fact that realized volatility series are systematically more volatile in high volatility periods. Returns in this framework display time varying volatility, skewness and kurtosis. We provide a detailed account of the empirical advantages of the model using data on the S&P 500 index and eight other indexes and stocks.
Department of Veterans Affairs — This dataset is provided as a requirement of OMB’s Integrated Data Collection (IDC) and links to VA’s Realized Cost Savings and Avoidances data in JSON format. Cost...
International Nuclear Information System (INIS)
1986-01-01
Most typical papers on the Ganil construction have been gathered in this book to somehow notice the success of its realization. Papers concern the accelerator and beam line, excluding experimental areas
Gaba, Yaé Ulrich
2017-01-01
In this paper, we discuss recent results about generalized metric spaces and fixed point theory. We introduce the notion of $\\eta$-cone metric spaces, give some topological properties and prove some fixed point theorems for contractive type maps on these spaces. In particular we show that theses $\\eta$-cone metric spaces are natural generalizations of both cone metric spaces and metric type spaces.
DEFF Research Database (Denmark)
Barndorff-Nielsen, Ole Eiler; Hansen, P. Reinhard; Lunde, Asger
2009-01-01
and find a remarkable level of agreement. We identify some features of the high-frequency data, which are challenging for realized kernels. They are when there are local trends in the data, over periods of around 10 minutes, where the prices and quotes are driven up or down. These can be associated......Realized kernels use high-frequency data to estimate daily volatility of individual stock prices. They can be applied to either trade or quote data. Here we provide the details of how we suggest implementing them in practice. We compare the estimates based on trade and quote data for the same stock...
Modeling returns volatility: Realized GARCH incorporating realized risk measure
Jiang, Wei; Ruan, Qingsong; Li, Jianfeng; Li, Ye
2018-06-01
This study applies realized GARCH models by introducing several risk measures of intraday returns into the measurement equation, to model the daily volatility of E-mini S&P 500 index futures returns. Besides using the conventional realized measures, realized volatility and realized kernel as our benchmarks, we also use generalized realized risk measures, realized absolute deviation, and two realized tail risk measures, realized value-at-risk and realized expected shortfall. The empirical results show that realized GARCH models using the generalized realized risk measures provide better volatility estimation for the in-sample and substantial improvement in volatility forecasting for the out-of-sample. In particular, the realized expected shortfall performs best for all of the alternative realized measures. Our empirical results reveal that future volatility may be more attributable to present losses (risk measures). The results are robust to different sample estimation windows.
Thermodynamic metrics and optimal paths.
Sivak, David A; Crooks, Gavin E
2012-05-11
A fundamental problem in modern thermodynamics is how a molecular-scale machine performs useful work, while operating away from thermal equilibrium without excessive dissipation. To this end, we derive a friction tensor that induces a Riemannian manifold on the space of thermodynamic states. Within the linear-response regime, this metric structure controls the dissipation of finite-time transformations, and bestows optimal protocols with many useful properties. We discuss the connection to the existing thermodynamic length formalism, and demonstrate the utility of this metric by solving for optimal control parameter protocols in a simple nonequilibrium model.
Energy Technology Data Exchange (ETDEWEB)
Geller, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires
1954-11-15
In the first part of this paper we consider the problem of leaks in vacuum systems, and their detection. We consider in particular the method of detection by means of a helium spectrometer. The second part deals with the experimental set p. The analyser and the ion source have been studied in great detail, and we have also discussed the technological and mechanical aspects of the apparatus and its performances. (author) [French] Dans la premiere partie de ce travail, nous traitons le probleme des fuites en technique du vide et leur detection en general. La methode de detection par spectrometre a helium y est envisagee plus particulierement. La deuxieme partie de l'article est consacree a la realisation du spectrometre. Le tube analyseur et la source d'ions y sont etudies en detail. Nous exposons de meme les conceptions technologiques et mecaniques de l'appareil ainsi que ses performances. (auteur)
Regge calculus from discontinuous metrics
International Nuclear Information System (INIS)
Khatsymovsky, V.M.
2003-01-01
Regge calculus is considered as a particular case of the more general system where the linklengths of any two neighbouring 4-tetrahedra do not necessarily coincide on their common face. This system is treated as that one described by metric discontinuous on the faces. In the superspace of all discontinuous metrics the Regge calculus metrics form some hypersurface defined by continuity conditions. Quantum theory of the discontinuous metric system is assumed to be fixed somehow in the form of quantum measure on (the space of functionals on) the superspace. The problem of reducing this measure to the Regge hypersurface is addressed. The quantum Regge calculus measure is defined from a discontinuous metric measure by inserting the δ-function-like phase factor. The requirement that continuity conditions be imposed in a 'face-independent' way fixes this factor uniquely. The term 'face-independent' means that this factor depends only on the (hyper)plane spanned by the face, not on it's form and size. This requirement seems to be natural from the viewpoint of existence of the well-defined continuum limit maximally free of lattice artefacts
Realization of Robertson-Walker spacetimes as affine hypersurfaces
International Nuclear Information System (INIS)
Chen Bangyen
2007-01-01
Due to the growing interest in embeddings of spacetimes in higher dimensional spaces, we consider a special type of embedding. We prove that Robertson-Walker spacetimes can be embedded as centroaffine hypersurfaces and graph hypersurfaces in some affine spaces in such a way that the induced relative metrics are exactly the Lorentzian metrics on the Robertson-Walker spacetimes. Such realizations allow us to view Robertson-Walker spacetimes and their submanifolds as affine submanifolds in a natural way. Consequently, our realizations make it possible to apply the tools of affine differential geometry to study Robertson-Walker spacetimes and their submanifolds
Baxstrom, Richard; Meyers, Todd
2016-01-01
Benjamin Christensen’s Häxan (The Witch, 1922) stands as a singular film within the history of cinema. Deftly weaving contemporary scientific analysis and powerfully staged historical scenes of satanic initiation, confession under torture, possession, and persecution, Häxan creatively blends spectacle and argument to provoke a humanist re-evaluation of witchcraft in European history as well as the contemporary treatment of female “hysterics” and the mentally ill. In Realizing the Witch, Baxst...
METRIC context unit architecture
Energy Technology Data Exchange (ETDEWEB)
Simpson, R.O.
1988-01-01
METRIC is an architecture for a simple but powerful Reduced Instruction Set Computer (RISC). Its speed comes from the simultaneous processing of several instruction streams, with instructions from the various streams being dispatched into METRIC's execution pipeline as they become available for execution. The pipeline is thus kept full, with a mix of instructions for several contexts in execution at the same time. True parallel programming is supported within a single execution unit, the METRIC Context Unit. METRIC's architecture provides for expansion through the addition of multiple Context Units and of specialized Functional Units. The architecture thus spans a range of size and performance from a single-chip microcomputer up through large and powerful multiprocessors. This research concentrates on the specification of the METRIC Context Unit at the architectural level. Performance tradeoffs made during METRIC's design are discussed, and projections of METRIC's performance are made based on simulation studies.
Realizing Controllable Quantum States
Takayanagi, Hideaki; Nitta, Junsaku
-- 4. Mesoscopic superconductivity with unconventional superconductor or ferromagnet. Ultraefficient microrefrigerators realized with ferromagnet-superconductor junctions / F. Giazotto et al. Anomalous charge transport in triplet superconductor junctions by the synergy effect of the proximity effect and the mid gap Andreev resonant states / Y. Tanaka and S. Kashiwaya. Paramagnetic and glass states in superconductive YBa[symbol]Cu[symbol]O[symbol] ceramics of sub-micron scale grains / H. Deguchi et al. Quantum properties of single-domain triplet superconductors / A. M. Gulian and K. S. Wood. A numerical study of Josephson current in p wave superconducting junctions / Y. Asano et al. Tilted bi-crystal sapphire substrates improve properties of grain boundary YBa[symbol]Cu[symbol]O[symbol] junctions and extend their Josephson response to THZ frequencies / E. Stepantsov et al. Circuit theory analysis of AB-plane tunnel junctions of unconventional superconductor Bi[symbol]Sr[symbol]Ca[symbol]Cu[symbol]O[symbol] / I. Shigeta et al. Transport properties of normal metal/anisotropic superconductor junctions in the eutectic system Sr[symbol]RuO[symbol]Ru / M. Kawamura et al. Macroscopic quantum tunneling in d-wave superconductor Josephson / S. Kawabata et al. Quasiparticle states of high-T[symbol] oxides observed by a Zeeman magnetic field response / S. Kashiwaya et al. Experimentally realizable devices for controlling the motion of magnetic flux quanta in anisotropic superconductors: vortex lenses, vortex diodes and vortex pumps / S. Savel'ev and F. Nori. Stability of vortex-antivortex "molecules" in mesoscopic superconducting triangles / V. R. Misko et al. Superconducting network with magnetic decoration - Hofstadter butterfly in spatially modulated magnetic field / Y. Iye et al. Observation of paramagnetic supercurrent in mesoscopic superconducting rings and disks using multiple-small-tunnel-junction method / A. Kanda et al. Guidance of vortices in high
Realization theory for rational systems: Minimal rational realizations
J. Nemcová (Jana); J.H. van Schuppen (Jan)
2010-01-01
htmlabstractThe study of realizations of response maps is a topic of control and system theory. Realization theory is used in system identification and control synthesis. A minimal rational realization of a given response map p is a rational realization of p such that the dimension of its state
Concurrency in product realization
Kelly, Michael J.
1994-03-01
Technology per se does not provide a competitive advantage. Timely exploitation of technology is what gives the competitive edge, and this demands a major shift in the product development process and management of the industrial enterprise. `Teaming to win' is more than a management theme; it is the disciplined engineering practice that is essential to success in today's global marketplace. Teaming supports the concurrent engineering practices required to integrate the activities of people responsible for product realization through achievement of shorter development cycles, lower costs, and defect-free products.
Oscillators from nonlinear realizations
Kozyrev, N.; Krivonos, S.
2018-02-01
We construct the systems of the harmonic and Pais-Uhlenbeck oscillators, which are invariant with respect to arbitrary noncompact Lie algebras. The equations of motion of these systems can be obtained with the help of the formalism of nonlinear realizations. We prove that it is always possible to choose time and the fields within this formalism in such a way that the equations of motion become linear and, therefore, reduce to ones of ordinary harmonic and Pais-Uhlenbeck oscillators. The first-order actions, that produce these equations, can also be provided. As particular examples of this construction, we discuss the so(2, 3) and G 2(2) algebras.
Fixed point theory in metric type spaces
Agarwal, Ravi P; O’Regan, Donal; Roldán-López-de-Hierro, Antonio Francisco
2015-01-01
Written by a team of leading experts in the field, this volume presents a self-contained account of the theory, techniques and results in metric type spaces (in particular in G-metric spaces); that is, the text approaches this important area of fixed point analysis beginning from the basic ideas of metric space topology. The text is structured so that it leads the reader from preliminaries and historical notes on metric spaces (in particular G-metric spaces) and on mappings, to Banach type contraction theorems in metric type spaces, fixed point theory in partially ordered G-metric spaces, fixed point theory for expansive mappings in metric type spaces, generalizations, present results and techniques in a very general abstract setting and framework. Fixed point theory is one of the major research areas in nonlinear analysis. This is partly due to the fact that in many real world problems fixed point theory is the basic mathematical tool used to establish the existence of solutions to problems which arise natur...
International Nuclear Information System (INIS)
Chang, Jonghwa
2015-01-01
High temperature gas cooled reactor has been developed since 1956. Fundamental idea of a gas cooled reactor is to achieve high temperature which is suitable for high efficiency application such as electricity generation. The core is composed of ceramics, graphite blocks which are mechanical stable up to very high temperature. Fuel is ceramics, TRISO ( tri-isotropic coated micro particle) whose dense coating layers work as small radioactivity containment. Coolant is inert gas, helium, which is stable chemically, neutronically, and thermal hydraulically. Several test reactors such as DRE, PB-1, FSV, AVR, THTR, HTTR, HTR-10 were built and demonstrated their safety. Large GA-HTR, RSA-PBMR projects are canceled and US-NGNP project is idling. Only Chinese HTR-PM demonstrator is under construction. HTGR has long history of development. For realization and market penetration, VHTR community should look at niche market such as carbon free energy supply to industry complex, electric power for small grid, carbon free hydrogen production, power source for space colony. Technology Readiness Level should be advanced to get proper investment from industry. For this, cooperation between international R and D institutions is required. Clearly divided role between universities, research institutions, and industries will reduce complication and shorten VHTR realization day
Energy Technology Data Exchange (ETDEWEB)
Chang, Jonghwa [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2015-10-15
High temperature gas cooled reactor has been developed since 1956. Fundamental idea of a gas cooled reactor is to achieve high temperature which is suitable for high efficiency application such as electricity generation. The core is composed of ceramics, graphite blocks which are mechanical stable up to very high temperature. Fuel is ceramics, TRISO ( tri-isotropic coated micro particle) whose dense coating layers work as small radioactivity containment. Coolant is inert gas, helium, which is stable chemically, neutronically, and thermal hydraulically. Several test reactors such as DRE, PB-1, FSV, AVR, THTR, HTTR, HTR-10 were built and demonstrated their safety. Large GA-HTR, RSA-PBMR projects are canceled and US-NGNP project is idling. Only Chinese HTR-PM demonstrator is under construction. HTGR has long history of development. For realization and market penetration, VHTR community should look at niche market such as carbon free energy supply to industry complex, electric power for small grid, carbon free hydrogen production, power source for space colony. Technology Readiness Level should be advanced to get proper investment from industry. For this, cooperation between international R and D institutions is required. Clearly divided role between universities, research institutions, and industries will reduce complication and shorten VHTR realization day.
Metric diffusion along foliations
Walczak, Szymon M
2017-01-01
Up-to-date research in metric diffusion along compact foliations is presented in this book. Beginning with fundamentals from the optimal transportation theory and the theory of foliations; this book moves on to cover Wasserstein distance, Kantorovich Duality Theorem, and the metrization of the weak topology by the Wasserstein distance. Metric diffusion is defined, the topology of the metric space is studied and the limits of diffused metrics along compact foliations are discussed. Essentials on foliations, holonomy, heat diffusion, and compact foliations are detailed and vital technical lemmas are proved to aide understanding. Graduate students and researchers in geometry, topology and dynamics of foliations and laminations will find this supplement useful as it presents facts about the metric diffusion along non-compact foliation and provides a full description of the limit for metrics diffused along foliation with at least one compact leaf on the two dimensions.
Chistyakov, Vyacheslav
2015-01-01
Aimed toward researchers and graduate students familiar with elements of functional analysis, linear algebra, and general topology; this book contains a general study of modulars, modular spaces, and metric modular spaces. Modulars may be thought of as generalized velocity fields and serve two important purposes: generate metric spaces in a unified manner and provide a weaker convergence, the modular convergence, whose topology is non-metrizable in general. Metric modular spaces are extensions of metric spaces, metric linear spaces, and classical modular linear spaces. The topics covered include the classification of modulars, metrizability of modular spaces, modular transforms and duality between modular spaces, metric and modular topologies. Applications illustrated in this book include: the description of superposition operators acting in modular spaces, the existence of regular selections of set-valued mappings, new interpretations of spaces of Lipschitzian and absolutely continuous mappings, the existe...
Software architecture analysis tool : software architecture metrics collection
Muskens, J.; Chaudron, M.R.V.; Westgeest, R.
2002-01-01
The Software Engineering discipline lacks the ability to evaluate software architectures. Here we describe a tool for software architecture analysis that is based on metrics. Metrics can be used to detect possible problems and bottlenecks in software architectures. Even though metrics do not give a
Prognostic Performance Metrics
National Aeronautics and Space Administration — This chapter presents several performance metrics for offline evaluation of prognostics algorithms. A brief overview of different methods employed for performance...
PREFACE: Nanospintronics design and realization
Akai, Hisazumi; Katayama-Yoshida, Hiroshi; Kasai, Hideaki
2004-12-01
This special issue of Journal of Physics: Condensed Matter contains selected papers from the 1st International Conference on Nanospintronics Design and Realization (ICNDR 2004), which was held in Kyoto, Japan, 24--28 May 2004. This conference was organized by the Nanospintronics Design and Realization project members: Hideaki Kasai, Osaka (Chair of the Conference) Hisazumi Akai, Osaka Hajime Asahi, Osaka Wilson Agerico Diño, Osaka Hiroshi Harima, Kyoto Tomoyuki Kakeshita, Osaka Junjiro Kanamori, Kyoto Hiroshi Katayama-Yoshida, Osaka Koichi Kusakabe, Osaka Hiroshi Nakanishi, Osaka (Secretary) Tamio Oguchi, Hiroshima Teruo Ono, Osaka Naoshi Suzuki, Osaka Hitoshi Tabata, Osaka under the auspices of the Japan Ministry of Education, Culture, Sports, Science and Technology (MEXT) Special Coordination Funds for Promoting Science and Technology, and the sponsorship of Osaka University and the International Institute for Advanced Studies (IIAS). The conference is intended to provide an international forum for experimental and theoretical researchers, in the rapidly developing field of nanospintronics. It aims to: provide an overview of our current understanding of the physics of spin transport in (magnetic) semiconductors and hybrid magnetic/semiconductor structures; provide a venue to present and discuss the latest developments in using spin-dependent phenomena in nano-(opto-) electronics and computing applications; provide a venue for discussion and assessment of other possible means of exploiting the spin-dependent phenomena in future nano-(opto-) electronic and computing applications; address current (and foreseeable future) problems, of fundamental and applied nature, in an effort to bridge the physics and technology gap between semiconducting and magnetic materials. All of these being geared towards bringing about the realization of a functioning nanospintronics. A total of 127 delegates from 15 countries took part in ICNDR 2004, which was comprised of 62 invited
Muntinga, D.; Bernritter, S.
2017-01-01
Het merk staat steeds meer centraal in de organisatie. Het is daarom essentieel om de gezondheid, prestaties en ontwikkelingen van het merk te meten. Het is echter een uitdaging om de juiste brand metrics te selecteren. Een enorme hoeveelheid metrics vraagt de aandacht van merkbeheerders. Maar welke
Privacy Metrics and Boundaries
L-F. Pau (Louis-François)
2005-01-01
textabstractThis paper aims at defining a set of privacy metrics (quantitative and qualitative) in the case of the relation between a privacy protector ,and an information gatherer .The aims with such metrics are: -to allow to assess and compare different user scenarios and their differences; for
Energy functionals for Calabi-Yau metrics
International Nuclear Information System (INIS)
Headrick, M; Nassar, A
2013-01-01
We identify a set of ''energy'' functionals on the space of metrics in a given Kähler class on a Calabi-Yau manifold, which are bounded below and minimized uniquely on the Ricci-flat metric in that class. Using these functionals, we recast the problem of numerically solving the Einstein equation as an optimization problem. We apply this strategy, using the ''algebraic'' metrics (metrics for which the Kähler potential is given in terms of a polynomial in the projective coordinates), to the Fermat quartic and to a one-parameter family of quintics that includes the Fermat and conifold quintics. We show that this method yields approximations to the Ricci-flat metric that are exponentially accurate in the degree of the polynomial (except at the conifold point, where the convergence is polynomial), and therefore orders of magnitude more accurate than the balanced metrics, previously studied as approximations to the Ricci-flat metric. The method is relatively fast and easy to implement. On the theoretical side, we also show that the functionals can be used to give a heuristic proof of Yau's theorem
Supplier selection using different metric functions
Directory of Open Access Journals (Sweden)
Omosigho S.E.
2015-01-01
Full Text Available Supplier selection is an important component of supply chain management in today’s global competitive environment. Hence, the evaluation and selection of suppliers have received considerable attention in the literature. Many attributes of suppliers, other than cost, are considered in the evaluation and selection process. Therefore, the process of evaluation and selection of suppliers is a multi-criteria decision making process. The methodology adopted to solve the supplier selection problem is intuitionistic fuzzy TOPSIS (Technique for Order Preference by Similarity to the Ideal Solution. Generally, TOPSIS is based on the concept of minimum distance from the positive ideal solution and maximum distance from the negative ideal solution. We examine the deficiencies of using only one metric function in TOPSIS and propose the use of spherical metric function in addition to the commonly used metric functions. For empirical supplier selection problems, more than one metric function should be used.
Software metrics a rigorous and practical approach
Fenton, Norman
2014-01-01
A Framework for Managing, Measuring, and Predicting Attributes of Software Development Products and ProcessesReflecting the immense progress in the development and use of software metrics in the past decades, Software Metrics: A Rigorous and Practical Approach, Third Edition provides an up-to-date, accessible, and comprehensive introduction to software metrics. Like its popular predecessors, this third edition discusses important issues, explains essential concepts, and offers new approaches for tackling long-standing problems.New to the Third EditionThis edition contains new material relevant
General relativity: An erfc metric
Plamondon, Réjean
2018-06-01
This paper proposes an erfc potential to incorporate in a symmetric metric. One key feature of this model is that it relies on the existence of an intrinsic physical constant σ, a star-specific proper length that scales all its surroundings. Based thereon, the new metric is used to study the space-time geometry of a static symmetric massive object, as seen from its interior. The analytical solutions to the Einstein equation are presented, highlighting the absence of singularities and discontinuities in such a model. The geodesics are derived in their second- and first-order differential formats. Recalling the slight impact of the new model on the classical general relativity tests in the solar system, a number of facts and open problems are briefly revisited on the basis of a heuristic definition of σ. A special attention is given to gravitational collapses and non-singular black holes.
An accurate metric for the spacetime around neutron stars
Pappas, George
2016-01-01
The problem of having an accurate description of the spacetime around neutron stars is of great astrophysical interest. For astrophysical applications, one needs to have a metric that captures all the properties of the spacetime around a neutron star. Furthermore, an accurate appropriately parameterised metric, i.e., a metric that is given in terms of parameters that are directly related to the physical structure of the neutron star, could be used to solve the inverse problem, which is to inf...
Schweizer, B
2005-01-01
Topics include special classes of probabilistic metric spaces, topologies, and several related structures, such as probabilistic normed and inner-product spaces. 1983 edition, updated with 3 new appendixes. Includes 17 illustrations.
National Research Council Canada - National Science Library
Olson, Teresa; Lee, Harry; Sanders, Johnnie
2002-01-01
.... We have developed the Tracker Performance Metric (TPM) specifically for this purpose. It was designed to measure the output performance, on a frame-by-frame basis, using its output position and quality...
Directory of Open Access Journals (Sweden)
2007-01-01
Full Text Available Many software and IT projects fail in completing theirs objectives because different causes of which the management of the projects has a high weight. In order to have successfully projects, lessons learned have to be used, historical data to be collected and metrics and indicators have to be computed and used to compare them with past projects and avoid failure to happen. This paper presents some metrics that can be used for the IT project management.
Mass Customization Measurements Metrics
DEFF Research Database (Denmark)
Nielsen, Kjeld; Brunø, Thomas Ditlev; Jørgensen, Kaj Asbjørn
2014-01-01
A recent survey has indicated that 17 % of companies have ceased mass customizing less than 1 year after initiating the effort. This paper presents measurement for a company’s mass customization performance, utilizing metrics within the three fundamental capabilities: robust process design, choice...... navigation, and solution space development. A mass customizer when assessing performance with these metrics can identify within which areas improvement would increase competitiveness the most and enable more efficient transition to mass customization....
Characterising risk - aggregated metrics: radiation and noise
International Nuclear Information System (INIS)
Passchier, W.
1998-01-01
The characterisation of risk is an important phase in the risk assessment - risk management process. From the multitude of risk attributes a few have to be selected to obtain a risk characteristic or profile that is useful for risk management decisions and implementation of protective measures. One way to reduce the number of attributes is aggregation. In the field of radiation protection such an aggregated metric is firmly established: effective dose. For protection against environmental noise the Health Council of the Netherlands recently proposed a set of aggregated metrics for noise annoyance and sleep disturbance. The presentation will discuss similarities and differences between these two metrics and practical limitations. The effective dose has proven its usefulness in designing radiation protection measures, which are related to the level of risk associated with the radiation practice in question, given that implicit judgements on radiation induced health effects are accepted. However, as the metric does not take into account the nature of radiation practice, it is less useful in policy discussions on the benefits and harm of radiation practices. With respect to the noise exposure metric, only one effect is targeted (annoyance), and the differences between sources are explicitly taken into account. This should make the metric useful in policy discussions with respect to physical planning and siting problems. The metric proposed has only significance on a population level, and can not be used as a predictor for individual risk. (author)
Balankin, Alexander S.; Bory-Reyes, Juan; Shapiro, Michael
2016-02-01
One way to deal with physical problems on nowhere differentiable fractals is the mapping of these problems into the corresponding problems for continuum with a proper fractal metric. On this way different definitions of the fractal metric were suggested to account for the essential fractal features. In this work we develop the metric differential vector calculus in a three-dimensional continuum with a non-Euclidean metric. The metric differential forms and Laplacian are introduced, fundamental identities for metric differential operators are established and integral theorems are proved by employing the metric version of the quaternionic analysis for the Moisil-Teodoresco operator, which has been introduced and partially developed in this paper. The relations between the metric and conventional operators are revealed. It should be emphasized that the metric vector calculus developed in this work provides a comprehensive mathematical formalism for the continuum with any suitable definition of fractal metric. This offers a novel tool to study physics on fractals.
Realistic Realizations Of Threshold Circuits
Razavi, Hassan M.
1987-08-01
Threshold logic, in which each input is weighted, has many theoretical advantages over the standard gate realization, such as reducing the number of gates, interconnections, and power dissipation. However, because of the difficult synthesis procedure and complicated circuit implementation, their use in the design of digital systems is almost nonexistant. In this study, three methods of NMOS realizations are discussed, and their advantages and shortcomings are explored. Also, the possibility of using the methods to realize multi-valued logic is examined.
Johnson, Stephen B.; Ghoshal, Sudipto; Haste, Deepak; Moore, Craig
2017-01-01
This paper describes the theory and considerations in the application of metrics to measure the effectiveness of fault management. Fault management refers here to the operational aspect of system health management, and as such is considered as a meta-control loop that operates to preserve or maximize the system's ability to achieve its goals in the face of current or prospective failure. As a suite of control loops, the metrics to estimate and measure the effectiveness of fault management are similar to those of classical control loops in being divided into two major classes: state estimation, and state control. State estimation metrics can be classified into lower-level subdivisions for detection coverage, detection effectiveness, fault isolation and fault identification (diagnostics), and failure prognosis. State control metrics can be classified into response determination effectiveness and response effectiveness. These metrics are applied to each and every fault management control loop in the system, for each failure to which they apply, and probabilistically summed to determine the effectiveness of these fault management control loops to preserve the relevant system goals that they are intended to protect.
Deep Transfer Metric Learning.
Junlin Hu; Jiwen Lu; Yap-Peng Tan; Jie Zhou
2016-12-01
Conventional metric learning methods usually assume that the training and test samples are captured in similar scenarios so that their distributions are assumed to be the same. This assumption does not hold in many real visual recognition applications, especially when samples are captured across different data sets. In this paper, we propose a new deep transfer metric learning (DTML) method to learn a set of hierarchical nonlinear transformations for cross-domain visual recognition by transferring discriminative knowledge from the labeled source domain to the unlabeled target domain. Specifically, our DTML learns a deep metric network by maximizing the inter-class variations and minimizing the intra-class variations, and minimizing the distribution divergence between the source domain and the target domain at the top layer of the network. To better exploit the discriminative information from the source domain, we further develop a deeply supervised transfer metric learning (DSTML) method by including an additional objective on DTML, where the output of both the hidden layers and the top layer are optimized jointly. To preserve the local manifold of input data points in the metric space, we present two new methods, DTML with autoencoder regularization and DSTML with autoencoder regularization. Experimental results on face verification, person re-identification, and handwritten digit recognition validate the effectiveness of the proposed methods.
Adaptive metric kernel regression
DEFF Research Database (Denmark)
Goutte, Cyril; Larsen, Jan
2000-01-01
Kernel smoothing is a widely used non-parametric pattern recognition technique. By nature, it suffers from the curse of dimensionality and is usually difficult to apply to high input dimensions. In this contribution, we propose an algorithm that adapts the input metric used in multivariate...... regression by minimising a cross-validation estimate of the generalisation error. This allows to automatically adjust the importance of different dimensions. The improvement in terms of modelling performance is illustrated on a variable selection task where the adaptive metric kernel clearly outperforms...
Adaptive Metric Kernel Regression
DEFF Research Database (Denmark)
Goutte, Cyril; Larsen, Jan
1998-01-01
Kernel smoothing is a widely used nonparametric pattern recognition technique. By nature, it suffers from the curse of dimensionality and is usually difficult to apply to high input dimensions. In this paper, we propose an algorithm that adapts the input metric used in multivariate regression...... by minimising a cross-validation estimate of the generalisation error. This allows one to automatically adjust the importance of different dimensions. The improvement in terms of modelling performance is illustrated on a variable selection task where the adaptive metric kernel clearly outperforms the standard...
Tice, Bradley S.
Metrical phonology, a linguistic process of phonological stress assessment and diagrammatic simplification of sentence and word stress, is discussed as it is found in the English language with the intention that it may be used in second language instruction. Stress is defined by its physical and acoustical correlates, and the principles of…
Engineering performance metrics
Delozier, R.; Snyder, N.
1993-03-01
Implementation of a Total Quality Management (TQM) approach to engineering work required the development of a system of metrics which would serve as a meaningful management tool for evaluating effectiveness in accomplishing project objectives and in achieving improved customer satisfaction. A team effort was chartered with the goal of developing a system of engineering performance metrics which would measure customer satisfaction, quality, cost effectiveness, and timeliness. The approach to developing this system involved normal systems design phases including, conceptual design, detailed design, implementation, and integration. The lessons teamed from this effort will be explored in this paper. These lessons learned may provide a starting point for other large engineering organizations seeking to institute a performance measurement system accomplishing project objectives and in achieving improved customer satisfaction. To facilitate this effort, a team was chartered to assist in the development of the metrics system. This team, consisting of customers and Engineering staff members, was utilized to ensure that the needs and views of the customers were considered in the development of performance measurements. The development of a system of metrics is no different than the development of any type of system. It includes the steps of defining performance measurement requirements, measurement process conceptual design, performance measurement and reporting system detailed design, and system implementation and integration.
Metrics for Probabilistic Geometries
DEFF Research Database (Denmark)
Tosi, Alessandra; Hauberg, Søren; Vellido, Alfredo
2014-01-01
the distribution over mappings is given by a Gaussian process. We treat the corresponding latent variable model as a Riemannian manifold and we use the expectation of the metric under the Gaussian process prior to define interpolating paths and measure distance between latent points. We show how distances...
Two-dimensional manifolds with metrics of revolution
International Nuclear Information System (INIS)
Sabitov, I Kh
2000-01-01
This is a study of the topological and metric structure of two-dimensional manifolds with a metric that is locally a metric of revolution. In the case of compact manifolds this problem can be thoroughly investigated, and in particular it is explained why there are no closed analytic surfaces of revolution in R 3 other than a sphere and a torus (moreover, in the smoothness class C ∞ such surfaces, understood in a certain generalized sense, exist in any topological class)
Physical Realizations of Quantum Computing
Kanemitsu, Shigeru; Salomaa, Martti; Takagi, Shin; Are the DiVincenzo Criteria Fulfilled in 2004 ?
2006-01-01
The contributors of this volume are working at the forefront of various realizations of quantum computers. They survey the recent developments in each realization, in the context of the DiVincenzo criteria, including nuclear magnetic resonance, Josephson junctions, quantum dots, and trapped ions. There are also some theoretical contributions which have relevance in the physical realizations of a quantum computer. This book fills the gap between elementary introductions to the subject and highly specialized research papers to allow beginning graduate students to understand the cutting-edge of r
International Nuclear Information System (INIS)
Roege, Paul E.; Collier, Zachary A.; Mancillas, James; McDonagh, John A.; Linkov, Igor
2014-01-01
Energy lies at the backbone of any advanced society and constitutes an essential prerequisite for economic growth, social order and national defense. However there is an Achilles heel to today's energy and technology relationship; namely a precarious intimacy between energy and the fiscal, social, and technical systems it supports. Recently, widespread and persistent disruptions in energy systems have highlighted the extent of this dependence and the vulnerability of increasingly optimized systems to changing conditions. Resilience is an emerging concept that offers to reconcile considerations of performance under dynamic environments and across multiple time frames by supplementing traditionally static system performance measures to consider behaviors under changing conditions and complex interactions among physical, information and human domains. This paper identifies metrics useful to implement guidance for energy-related planning, design, investment, and operation. Recommendations are presented using a matrix format to provide a structured and comprehensive framework of metrics relevant to a system's energy resilience. The study synthesizes previously proposed metrics and emergent resilience literature to provide a multi-dimensional model intended for use by leaders and practitioners as they transform our energy posture from one of stasis and reaction to one that is proactive and which fosters sustainable growth. - Highlights: • Resilience is the ability of a system to recover from adversity. • There is a need for methods to quantify and measure system resilience. • We developed a matrix-based approach to generate energy resilience metrics. • These metrics can be used in energy planning, system design, and operations
Software Quality Assurance Metrics
McRae, Kalindra A.
2004-01-01
Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.
Proposal and realization advertising campaign
RYCHLÁ, Marie
2008-01-01
The Bachelor Paper contains proposal and realization advertising campaign, including make charge for cost amount. The advertising campaign is made for chosen product of firm. Advertising campaign is planning by the medium of broadsheet and advertising on the Internet.
Technology Education: The Means to the Realization of Nigeria's ...
African Journals Online (AJOL)
The realization of Nigeria's vision 2020 is now a challenging problem. However, using Technology Education as a means to the realization is the focus of this paper. This paper highlighted the current state of technology education in Nigeria and stated its efficacy to advance development and improve the nation's economy.
Jacobi-Maupertuis metric and Kepler equation
Chanda, Sumanto; Gibbons, Gary William; Guha, Partha
This paper studies the application of the Jacobi-Eisenhart lift, Jacobi metric and Maupertuis transformation to the Kepler system. We start by reviewing fundamentals and the Jacobi metric. Then we study various ways to apply the lift to Kepler-related systems: first as conformal description and Bohlin transformation of Hooke’s oscillator, second in contact geometry and third in Houri’s transformation [T. Houri, Liouville integrability of Hamiltonian systems and spacetime symmetry (2016), www.geocities.jp/football_physician/publication.html], coupled with Milnor’s construction [J. Milnor, On the geometry of the Kepler problem, Am. Math. Mon. 90 (1983) 353-365] with eccentric anomaly.
On the Metric-based Approximate Minimization of Markov Chains
DEFF Research Database (Denmark)
Bacci, Giovanni; Bacci, Giorgio; Larsen, Kim Guldstrand
2018-01-01
In this paper we address the approximate minimization problem of Markov Chains (MCs) from a behavioral metric-based perspective. Specifically, given a finite MC and a positive integer k, we are looking for an MC with at most k states having minimal distance to the original. The metric considered...
On the Metric-Based Approximate Minimization of Markov Chains
DEFF Research Database (Denmark)
Bacci, Giovanni; Bacci, Giorgio; Larsen, Kim Guldstrand
2017-01-01
We address the behavioral metric-based approximate minimization problem of Markov Chains (MCs), i.e., given a finite MC and a positive integer k, we are interested in finding a k-state MC of minimal distance to the original. By considering as metric the bisimilarity distance of Desharnais at al...
Enterprise Sustainment Metrics
2015-06-19
are negatively impacting KPIs” (Parmenter, 2010: 31). In the current state, the Air Force’s AA and PBL metrics are once again split . AA does...must have the authority to “take immediate action to rectify situations that are negatively impacting KPIs” (Parmenter, 2010: 31). 3. Measuring...highest profitability and shareholder value for each company” (2014: 273). By systematically diagraming a process, either through a swim lane flowchart
Rainbows without unicorns: metric structures in theories with modified dispersion relations
International Nuclear Information System (INIS)
Lobo, Iarley P.; Loret, Niccolo; Nettel, Francisco
2017-01-01
Rainbow metrics are a widely used approach to the metric formalism for theories with modified dispersion relations. They have had a huge success in the quantum gravity phenomenology literature, since they allow one to introduce momentum-dependent space-time metrics into the description of systems with a modified dispersion relation. In this paper, we introduce the reader to some realizations of this general idea: the original rainbow metrics proposal, the momentum-space-inspired metric and a Finsler geometry approach. As the main result of this work we also present an alternative definition of a four-velocity dependent metric which allows one to handle the massless limit. This paper aims to highlight some of their properties and how to properly describe their relativistic realizations. (orig.)
Rainbows without unicorns: metric structures in theories with modified dispersion relations
Lobo, Iarley P.; Loret, Niccoló; Nettel, Francisco
2017-07-01
Rainbow metrics are a widely used approach to the metric formalism for theories with modified dispersion relations. They have had a huge success in the quantum gravity phenomenology literature, since they allow one to introduce momentum-dependent space-time metrics into the description of systems with a modified dispersion relation. In this paper, we introduce the reader to some realizations of this general idea: the original rainbow metrics proposal, the momentum-space-inspired metric and a Finsler geometry approach. As the main result of this work we also present an alternative definition of a four-velocity dependent metric which allows one to handle the massless limit. This paper aims to highlight some of their properties and how to properly describe their relativistic realizations.
Rainbows without unicorns: metric structures in theories with modified dispersion relations
Energy Technology Data Exchange (ETDEWEB)
Lobo, Iarley P. [Universita ' ' La Sapienza' ' , Dipartimento di Fisica, Rome (Italy); ICRANet, Pescara (Italy); CAPES Foundation, Ministry of Education of Brazil, Brasilia (Brazil); Universidade Federal da Paraiba, Departamento de Fisica, Joao Pessoa, PB (Brazil); INFN Sezione Roma 1 (Italy); Loret, Niccolo [Ruder Boskovic Institute, Division of Theoretical Physics, Zagreb (Croatia); Nettel, Francisco [Universita ' ' La Sapienza' ' , Dipartimento di Fisica, Rome (Italy); Universidad Nacional Autonoma de Mexico, Instituto de Ciencias Nucleares, Mexico (Mexico); INFN Sezione Roma 1 (Italy)
2017-07-15
Rainbow metrics are a widely used approach to the metric formalism for theories with modified dispersion relations. They have had a huge success in the quantum gravity phenomenology literature, since they allow one to introduce momentum-dependent space-time metrics into the description of systems with a modified dispersion relation. In this paper, we introduce the reader to some realizations of this general idea: the original rainbow metrics proposal, the momentum-space-inspired metric and a Finsler geometry approach. As the main result of this work we also present an alternative definition of a four-velocity dependent metric which allows one to handle the massless limit. This paper aims to highlight some of their properties and how to properly describe their relativistic realizations. (orig.)
Symmetries of the dual metrics
International Nuclear Information System (INIS)
Baleanu, D.
1998-01-01
The geometric duality between the metric g μν and a Killing tensor K μν is studied. The conditions were found when the symmetries of the metric g μν and the dual metric K μν are the same. Dual spinning space was constructed without introduction of torsion. The general results are applied to the case of Kerr-Newmann metric
Steiner trees for fixed orientation metrics
DEFF Research Database (Denmark)
Brazil, Marcus; Zachariasen, Martin
2009-01-01
We consider the problem of constructing Steiner minimum trees for a metric defined by a polygonal unit circle (corresponding to s = 2 weighted legal orientations in the plane). A linear-time algorithm to enumerate all angle configurations for degree three Steiner points is given. We provide...... a simple proof that the angle configuration for a Steiner point extends to all Steiner points in a full Steiner minimum tree, such that at most six orientations suffice for edges in a full Steiner minimum tree. We show that the concept of canonical forms originally introduced for the uniform orientation...... metric generalises to the fixed orientation metric. Finally, we give an O(s n) time algorithm to compute a Steiner minimum tree for a given full Steiner topology with n terminal leaves....
Performance metrics for the evaluation of hyperspectral chemical identification systems
Truslow, Eric; Golowich, Steven; Manolakis, Dimitris; Ingle, Vinay
2016-02-01
Remote sensing of chemical vapor plumes is a difficult but important task for many military and civilian applications. Hyperspectral sensors operating in the long-wave infrared regime have well-demonstrated detection capabilities. However, the identification of a plume's chemical constituents, based on a chemical library, is a multiple hypothesis testing problem which standard detection metrics do not fully describe. We propose using an additional performance metric for identification based on the so-called Dice index. Our approach partitions and weights a confusion matrix to develop both the standard detection metrics and identification metric. Using the proposed metrics, we demonstrate that the intuitive system design of a detector bank followed by an identifier is indeed justified when incorporating performance information beyond the standard detection metrics.
Kerr metric in cosmological background
Energy Technology Data Exchange (ETDEWEB)
Vaidya, P C [Gujarat Univ., Ahmedabad (India). Dept. of Mathematics
1977-06-01
A metric satisfying Einstein's equation is given which in the vicinity of the source reduces to the well-known Kerr metric and which at large distances reduces to the Robertson-Walker metric of a nomogeneous cosmological model. The radius of the event horizon of the Kerr black hole in the cosmological background is found out.
Learning Low-Dimensional Metrics
Jain, Lalit; Mason, Blake; Nowak, Robert
2017-01-01
This paper investigates the theoretical foundations of metric learning, focused on three key questions that are not fully addressed in prior work: 1) we consider learning general low-dimensional (low-rank) metrics as well as sparse metrics; 2) we develop upper and lower (minimax)bounds on the generalization error; 3) we quantify the sample complexity of metric learning in terms of the dimension of the feature space and the dimension/rank of the underlying metric;4) we also bound the accuracy ...
Fisher information metrics for binary classifier evaluation and training
CERN. Geneva
2018-01-01
Different evaluation metrics for binary classifiers are appropriate to different scientific domains and even to different problems within the same domain. This presentation focuses on the optimisation of event selection to minimise statistical errors in HEP parameter estimation, a problem that is best analysed in terms of the maximisation of Fisher information about the measured parameters. After describing a general formalism to derive evaluation metrics based on Fisher information, three more specific metrics are introduced for the measurements of signal cross sections in counting experiments (FIP1) or distribution fits (FIP2) and for the measurements of other parameters from distribution fits (FIP3). The FIP2 metric is particularly interesting because it can be derived from any ROC curve, provided that prevalence is also known. In addition to its relation to measurement errors when used as an evaluation criterion (which makes it more interesting that the ROC AUC), a further advantage of the FIP2 metric is ...
Multiple Realizability and Biological Laws
Raerinne, Jani P.; Eronen, Markus I.
2012-01-01
We critically analyze Alexander Rosenberg's argument based on the multiple realizability of biological properties that there are no biological laws. The argument is intuitive and suggestive. Nevertheless, a closer analysis reveals that the argument rests on dubious assumptions about the nature of
Realizations of the canonical representation
Indian Academy of Sciences (India)
Traditionally, the canonical representation is realized on the Hilbert space ... Fix a decomposition R2n = Rn × Rn ..... to an orthonormal basis {ψ1,ψ2,. ..... [7] Vemuri M K, A non-commutative Sobolev inequality and its application to spectral.
Analysis of Popper's Experiment and Its Realization
Qureshi, T.
2012-04-01
An experiment proposed by Karl Popper to test the standard interpretation of quantum mechanics was realized by Kim and Shih. We use a quantum mechanical calculation to analyze Popper's proposal, and find a surprising result for the location of the virtual slit. We also analyze Kim and Shih's experiment, and demonstrate that although it ingeniously overcomes the problem of temporal spreading of the wave-packet, it is inconclusive about Popper's test. We point out that another experiment which (unknowingly) implements Popper's test in a conclusive way, has actually been carried out. Its results are in contradiction with Popper's prediction, and agree with our analysis.
Dynamic large eddy simulation: Stability via realizability
Mokhtarpoor, Reza; Heinz, Stefan
2017-10-01
The concept of dynamic large eddy simulation (LES) is highly attractive: such methods can dynamically adjust to changing flow conditions, which is known to be highly beneficial. For example, this avoids the use of empirical, case dependent approximations (like damping functions). Ideally, dynamic LES should be local in physical space (without involving artificial clipping parameters), and it should be stable for a wide range of simulation time steps, Reynolds numbers, and numerical schemes. These properties are not trivial, but dynamic LES suffers from such problems over decades. We address these questions by performing dynamic LES of periodic hill flow including separation at a high Reynolds number Re = 37 000. For the case considered, the main result of our studies is that it is possible to design LES that has the desired properties. It requires physical consistency: a PDF-realizable and stress-realizable LES model, which requires the inclusion of the turbulent kinetic energy in the LES calculation. LES models that do not honor such physical consistency can become unstable. We do not find support for the previous assumption that long-term correlations of negative dynamic model parameters are responsible for instability. Instead, we concluded that instability is caused by the stable spatial organization of significant unphysical states, which are represented by wall-type gradient streaks of the standard deviation of the dynamic model parameter. The applicability of our realizability stabilization to other dynamic models (including the dynamic Smagorinsky model) is discussed.
Alternative kinetic energy metrics for Lagrangian systems
Sarlet, W.; Prince, G.
2010-11-01
We examine Lagrangian systems on \\ {R}^n with standard kinetic energy terms for the possibility of additional, alternative Lagrangians with kinetic energy metrics different to the Euclidean one. Using the techniques of the inverse problem in the calculus of variations we find necessary and sufficient conditions for the existence of such Lagrangians. We illustrate the problem in two and three dimensions with quadratic and cubic potentials. As an aside we show that the well-known anomalous Lagrangians for the Coulomb problem can be removed by switching on a magnetic field, providing an appealing resolution of the ambiguous quantizations of the hydrogen atom.
Metrics with vanishing quantum corrections
International Nuclear Information System (INIS)
Coley, A A; Hervik, S; Gibbons, G W; Pope, C N
2008-01-01
We investigate solutions of the classical Einstein or supergravity equations that solve any set of quantum corrected Einstein equations in which the Einstein tensor plus a multiple of the metric is equated to a symmetric conserved tensor T μν (g αβ , ∂ τ g αβ , ∂ τ ∂ σ g αβ , ...,) constructed from sums of terms, the involving contractions of the metric and powers of arbitrary covariant derivatives of the curvature tensor. A classical solution, such as an Einstein metric, is called universal if, when evaluated on that Einstein metric, T μν is a multiple of the metric. A Ricci flat classical solution is called strongly universal if, when evaluated on that Ricci flat metric, T μν vanishes. It is well known that pp-waves in four spacetime dimensions are strongly universal. We focus attention on a natural generalization; Einstein metrics with holonomy Sim(n - 2) in which all scalar invariants are zero or constant. In four dimensions we demonstrate that the generalized Ghanam-Thompson metric is weakly universal and that the Goldberg-Kerr metric is strongly universal; indeed, we show that universality extends to all four-dimensional Sim(2) Einstein metrics. We also discuss generalizations to higher dimensions
PRAGMATIC TRANSFER IN REQUEST REALIZATIONS
Directory of Open Access Journals (Sweden)
Indawan Syahri
2007-01-01
Full Text Available This study investigates the pragmatic transfer in English request realizations made by EFL learners, i.e. the proficient learners. The subjects were students of an English Study Program who obtained TOEFL-like scores of at least 450. The data were collected by means of DCT-questionnaires and Role-plays. The results show that the subjects realize requests in the form of external modifications more frequently. Most of them embed their requests with supportive moves dominantly. They enfold the acts with the moves before, after or in both positions. Of the three positions, they mostly insert the moves initial position, i.e., through inductive patterns. This is due to pragmatic transfer.
Completion of a Dislocated Metric Space
Directory of Open Access Journals (Sweden)
P. Sumati Kumari
2015-01-01
Full Text Available We provide a construction for the completion of a dislocated metric space (abbreviated d-metric space; we also prove that the completion of the metric associated with a d-metric coincides with the metric associated with the completion of the d-metric.
Metric adjusted skew information
DEFF Research Database (Denmark)
Hansen, Frank
2008-01-01
) that vanishes for observables commuting with the state. We show that the skew information is a convex function on the manifold of states. It also satisfies other requirements, proposed by Wigner and Yanase, for an effective measure-of-information content of a state relative to a conserved observable. We...... establish a connection between the geometrical formulation of quantum statistics as proposed by Chentsov and Morozova and measures of quantum information as introduced by Wigner and Yanase and extended in this article. We show that the set of normalized Morozova-Chentsov functions describing the possible......We extend the concept of Wigner-Yanase-Dyson skew information to something we call "metric adjusted skew information" (of a state with respect to a conserved observable). This "skew information" is intended to be a non-negative quantity bounded by the variance (of an observable in a state...
The metric system: An introduction
Energy Technology Data Exchange (ETDEWEB)
Lumley, S.M.
1995-05-01
On July 13, 1992, Deputy Director Duane Sewell restated the Laboratory`s policy on conversion to the metric system which was established in 1974. Sewell`s memo announced the Laboratory`s intention to continue metric conversion on a reasonable and cost effective basis. Copies of the 1974 and 1992 Administrative Memos are contained in the Appendix. There are three primary reasons behind the Laboratory`s conversion to the metric system. First, Public Law 100-418, passed in 1988, states that by the end of fiscal year 1992 the Federal Government must begin using metric units in grants, procurements, and other business transactions. Second, on July 25, 1991, President George Bush signed Executive Order 12770 which urged Federal agencies to expedite conversion to metric units. Third, the contract between the University of California and the Department of Energy calls for the Laboratory to convert to the metric system. Thus, conversion to the metric system is a legal requirement and a contractual mandate with the University of California. Public Law 100-418 and Executive Order 12770 are discussed in more detail later in this section, but first they examine the reasons behind the nation`s conversion to the metric system. The second part of this report is on applying the metric system.
Attack-Resistant Trust Metrics
Levien, Raph
The Internet is an amazingly powerful tool for connecting people together, unmatched in human history. Yet, with that power comes great potential for spam and abuse. Trust metrics are an attempt to compute the set of which people are trustworthy and which are likely attackers. This chapter presents two specific trust metrics developed and deployed on the Advogato Website, which is a community blog for free software developers. This real-world experience demonstrates that the trust metrics fulfilled their goals, but that for good results, it is important to match the assumptions of the abstract trust metric computation to the real-world implementation.
The metric system: An introduction
Lumley, Susan M.
On 13 Jul. 1992, Deputy Director Duane Sewell restated the Laboratory's policy on conversion to the metric system which was established in 1974. Sewell's memo announced the Laboratory's intention to continue metric conversion on a reasonable and cost effective basis. Copies of the 1974 and 1992 Administrative Memos are contained in the Appendix. There are three primary reasons behind the Laboratory's conversion to the metric system. First, Public Law 100-418, passed in 1988, states that by the end of fiscal year 1992 the Federal Government must begin using metric units in grants, procurements, and other business transactions. Second, on 25 Jul. 1991, President George Bush signed Executive Order 12770 which urged Federal agencies to expedite conversion to metric units. Third, the contract between the University of California and the Department of Energy calls for the Laboratory to convert to the metric system. Thus, conversion to the metric system is a legal requirement and a contractual mandate with the University of California. Public Law 100-418 and Executive Order 12770 are discussed in more detail later in this section, but first they examine the reasons behind the nation's conversion to the metric system. The second part of this report is on applying the metric system.
Metric-adjusted skew information
DEFF Research Database (Denmark)
Liang, Cai; Hansen, Frank
2010-01-01
on a bipartite system and proved superadditivity of the Wigner-Yanase-Dyson skew informations for such states. We extend this result to the general metric-adjusted skew information. We finally show that a recently introduced extension to parameter values 1 ...We give a truly elementary proof of the convexity of metric-adjusted skew information following an idea of Effros. We extend earlier results of weak forms of superadditivity to general metric-adjusted skew information. Recently, Luo and Zhang introduced the notion of semi-quantum states...... of (unbounded) metric-adjusted skew information....
Directory of Open Access Journals (Sweden)
Isabel Garrido
2016-04-01
Full Text Available The class of metric spaces (X,d known as small-determined spaces, introduced by Garrido and Jaramillo, are properly defined by means of some type of real-valued Lipschitz functions on X. On the other hand, B-simple metric spaces introduced by Hejcman are defined in terms of some kind of bornologies of bounded subsets of X. In this note we present a common framework where both classes of metric spaces can be studied which allows us to see not only the relationships between them but also to obtain new internal characterizations of these metric properties.
Sigma Routing Metric for RPL Protocol
Directory of Open Access Journals (Sweden)
Paul Sanmartin
2018-04-01
Full Text Available This paper presents the adaptation of a specific metric for the RPL protocol in the objective function MRHOF. Among the functions standardized by IETF, we find OF0, which is based on the minimum hop count, as well as MRHOF, which is based on the Expected Transmission Count (ETX. However, when the network becomes denser or the number of nodes increases, both OF0 and MRHOF introduce long hops, which can generate a bottleneck that restricts the network. The adaptation is proposed to optimize both OFs through a new routing metric. To solve the above problem, the metrics of the minimum number of hops and the ETX are combined by designing a new routing metric called SIGMA-ETX, in which the best route is calculated using the standard deviation of ETX values between each node, as opposed to working with the ETX average along the route. This method ensures a better routing performance in dense sensor networks. The simulations are done through the Cooja simulator, based on the Contiki operating system. The simulations showed that the proposed optimization outperforms at a high margin in both OF0 and MRHOF, in terms of network latency, packet delivery ratio, lifetime, and power consumption.
Software metrics: Software quality metrics for distributed systems. [reliability engineering
Post, J. V.
1981-01-01
Software quality metrics was extended to cover distributed computer systems. Emphasis is placed on studying embedded computer systems and on viewing them within a system life cycle. The hierarchy of quality factors, criteria, and metrics was maintained. New software quality factors were added, including survivability, expandability, and evolvability.
INFORMATIVE ENERGY METRIC FOR SIMILARITY MEASURE IN REPRODUCING KERNEL HILBERT SPACES
Directory of Open Access Journals (Sweden)
Songhua Liu
2012-02-01
Full Text Available In this paper, information energy metric (IEM is obtained by similarity computing for high-dimensional samples in a reproducing kernel Hilbert space (RKHS. Firstly, similar/dissimilar subsets and their corresponding informative energy functions are defined. Secondly, IEM is proposed for similarity measure of those subsets, which converts the non-metric distances into metric ones. Finally, applications of this metric is introduced, such as classification problems. Experimental results validate the effectiveness of the proposed method.
Realization of first order optical systems using thin lenses
International Nuclear Information System (INIS)
Sudarshan, E.C.G.; Mukunda, N.; Simon, R.
1983-09-01
A first order optical system is investigated in full generality within the context of wave optics. We reduce the problem to a study of the ray transfer matrices. The simplest such systems correspond to axially symmetric propagation. Realization of such systems by centrally located lenses separated by finite distances is studied. It is shown that every axially symmetric first order system can be realized using at most three lenses. Among anisotropic systems it is proven that every symplectic ray transfer matrix, and no others, can be realized using lenses and free propagations. Suggestions for further study of the general first order system are outlined. 16 references
PRINCIPLES OF FORMATION AND REALIZATION OF REGIONAL INDUSTRIAL POLICY
Directory of Open Access Journals (Sweden)
R.I. Chenenova
2007-09-01
Full Text Available It is analysed existing norm-legal base of realization of regional industrial policy from a position of conformity of principles of its formation and realization to problems of development of the industry in conditions of an openness to the world market. Opportunities of their evolution in the directions promoting becoming of competitive structure of an industrial complex of region are shown.
Design and realization of simulators
International Nuclear Information System (INIS)
Mathey, C.
1984-01-01
The two main categories of simulators are training simulators of which aim is the education of the nuclear power plant operators, and the study simulators. The French park of simulators is reviewed, as also their field of utilization. One deals with the simulator design: general description, calculation tools, middleware, and programming, mathematical models and numerical methods. Then, the instructor post of the EDF's simulators are more particularly described. The realization of a simulator includes two main stages: the development of the material and, the development of the software [fr
Metrics in Keplerian orbits quotient spaces
Milanov, Danila V.
2018-03-01
Quotient spaces of Keplerian orbits are important instruments for the modelling of orbit samples of celestial bodies on a large time span. We suppose that variations of the orbital eccentricities, inclinations and semi-major axes remain sufficiently small, while arbitrary perturbations are allowed for the arguments of pericentres or longitudes of the nodes, or both. The distance between orbits or their images in quotient spaces serves as a numerical criterion for such problems of Celestial Mechanics as search for common origin of meteoroid streams, comets, and asteroids, asteroid families identification, and others. In this paper, we consider quotient sets of the non-rectilinear Keplerian orbits space H. Their elements are identified irrespective of the values of pericentre arguments or node longitudes. We prove that distance functions on the quotient sets, introduced in Kholshevnikov et al. (Mon Not R Astron Soc 462:2275-2283, 2016), satisfy metric space axioms and discuss theoretical and practical importance of this result. Isometric embeddings of the quotient spaces into R^n, and a space of compact subsets of H with Hausdorff metric are constructed. The Euclidean representations of the orbits spaces find its applications in a problem of orbit averaging and computational algorithms specific to Euclidean space. We also explore completions of H and its quotient spaces with respect to corresponding metrics and establish a relation between elements of the extended spaces and rectilinear trajectories. Distance between an orbit and subsets of elliptic and hyperbolic orbits is calculated. This quantity provides an upper bound for the metric value in a problem of close orbits identification. Finally the invariance of the equivalence relations in H under coordinates change is discussed.
Multimetric indices: How many metrics?
Multimetric indices (MMI’s) often include 5 to 15 metrics, each representing a different attribute of assemblage condition, such as species diversity, tolerant taxa, and nonnative taxa. Is there an optimal number of metrics for MMIs? To explore this question, I created 1000 9-met...
Metrical Phonology: German Sound System.
Tice, Bradley S.
Metrical phonology, a linguistic process of phonological stress assessment and diagrammatic simplification of sentence and word stress, is discussed as it is found in the English and German languages. The objective is to promote use of metrical phonology as a tool for enhancing instruction in stress patterns in words and sentences, particularly in…
Extending cosmology: the metric approach
Mendoza, S.
2012-01-01
Comment: 2012, Extending Cosmology: The Metric Approach, Open Questions in Cosmology; Review article for an Intech "Open questions in cosmology" book chapter (19 pages, 3 figures). Available from: http://www.intechopen.com/books/open-questions-in-cosmology/extending-cosmology-the-metric-approach
International Nuclear Information System (INIS)
Douglas, Michael R.; Karp, Robert L.; Lukic, Sergio; Reinbacher, Rene
2008-01-01
We develop numerical methods for approximating Ricci flat metrics on Calabi-Yau hypersurfaces in projective spaces. Our approach is based on finding balanced metrics and builds on recent theoretical work by Donaldson. We illustrate our methods in detail for a one parameter family of quintics. We also suggest several ways to extend our results
High resolution metric imaging payload
Delclaud, Y.
2017-11-01
Alcatel Space Industries has become Europe's leader in the field of high and very high resolution optical payloads, in the frame work of earth observation system able to provide military government with metric images from space. This leadership allowed ALCATEL to propose for the export market, within a French collaboration frame, a complete space based system for metric observation.
Energy Technology Data Exchange (ETDEWEB)
Gibbons, Gary W. [DAMTP, University of Cambridge, Wilberforce Road, Cambridge, CB3 0WA U.K. (United Kingdom); Volkov, Mikhail S., E-mail: gwg1@cam.ac.uk, E-mail: volkov@lmpt.univ-tours.fr [Laboratoire de Mathématiques et Physique Théorique, LMPT CNRS—UMR 7350, Université de Tours, Parc de Grandmont, Tours, 37200 France (France)
2017-05-01
We study solutions obtained via applying dualities and complexifications to the vacuum Weyl metrics generated by massive rods and by point masses. Rescaling them and extending to complex parameter values yields axially symmetric vacuum solutions containing singularities along circles that can be viewed as singular matter sources. These solutions have wormhole topology with several asymptotic regions interconnected by throats and their sources can be viewed as thin rings of negative tension encircling the throats. For a particular value of the ring tension the geometry becomes exactly flat although the topology remains non-trivial, so that the rings literally produce holes in flat space. To create a single ring wormhole of one metre radius one needs a negative energy equivalent to the mass of Jupiter. Further duality transformations dress the rings with the scalar field, either conventional or phantom. This gives rise to large classes of static, axially symmetric solutions, presumably including all previously known solutions for a gravity-coupled massless scalar field, as for example the spherically symmetric Bronnikov-Ellis wormholes with phantom scalar. The multi-wormholes contain infinite struts everywhere at the symmetry axes, apart from solutions with locally flat geometry.
Metrics for image segmentation
Rees, Gareth; Greenway, Phil; Morray, Denise
1998-07-01
An important challenge in mapping image-processing techniques onto applications is the lack of quantitative performance measures. From a systems engineering perspective these are essential if system level requirements are to be decomposed into sub-system requirements which can be understood in terms of algorithm selection and performance optimization. Nowhere in computer vision is this more evident than in the area of image segmentation. This is a vigorous and innovative research activity, but even after nearly two decades of progress, it remains almost impossible to answer the question 'what would the performance of this segmentation algorithm be under these new conditions?' To begin to address this shortcoming, we have devised a well-principled metric for assessing the relative performance of two segmentation algorithms. This allows meaningful objective comparisons to be made between their outputs. It also estimates the absolute performance of an algorithm given ground truth. Our approach is an information theoretic one. In this paper, we describe the theory and motivation of our method, and present practical results obtained from a range of state of the art segmentation methods. We demonstrate that it is possible to measure the objective performance of these algorithms, and to use the information so gained to provide clues about how their performance might be improved.
Metric regularity and subdifferential calculus
International Nuclear Information System (INIS)
Ioffe, A D
2000-01-01
The theory of metric regularity is an extension of two classical results: the Lyusternik tangent space theorem and the Graves surjection theorem. Developments in non-smooth analysis in the 1980s and 1990s paved the way for a number of far-reaching extensions of these results. It was also well understood that the phenomena behind the results are of metric origin, not connected with any linear structure. At the same time it became clear that some basic hypotheses of the subdifferential calculus are closely connected with the metric regularity of certain set-valued maps. The survey is devoted to the metric theory of metric regularity and its connection with subdifferential calculus in Banach spaces
Sonja N. Oswalt; Christopher M. Oswalt
2008-01-01
This paper compares and contrasts hurricane-related damage recorded across the Mississippi landscape in the 2 years following Katrina with initial damage assessments based on modeled parameters by the USDA Forest Service. Logistic and multiple regressions are used to evaluate the influence of stand characteristics on tree damage probability. Specifically, this paper...
Metrics for border management systems.
Energy Technology Data Exchange (ETDEWEB)
Duggan, Ruth Ann
2009-07-01
There are as many unique and disparate manifestations of border systems as there are borders to protect. Border Security is a highly complex system analysis problem with global, regional, national, sector, and border element dimensions for land, water, and air domains. The complexity increases with the multiple, and sometimes conflicting, missions for regulating the flow of people and goods across borders, while securing them for national security. These systems include frontier border surveillance, immigration management and customs functions that must operate in a variety of weather, terrain, operational conditions, cultural constraints, and geopolitical contexts. As part of a Laboratory Directed Research and Development Project 08-684 (Year 1), the team developed a reference framework to decompose this complex system into international/regional, national, and border elements levels covering customs, immigration, and border policing functions. This generalized architecture is relevant to both domestic and international borders. As part of year two of this project (09-1204), the team determined relevant relative measures to better understand border management performance. This paper describes those relative metrics and how they can be used to improve border management systems.
Realized population change for long-term monitoring: California spotted owl case study
Mary M. Conner; John J. Keane; Claire V. Gallagher; Gretchen Jehle; Thomas E. Munton; Paula A. Shaklee; Ross A. Gerrard
2013-01-01
The annual rate of population change (λt) is a good metric for evaluating population performance because it summarizes survival and recruitment rates and can be used for open populations. Another measure of population performance, realized population change (Δt...
Dreams, Perception, and Creative Realization.
Glaskin, Katie
2015-10-01
This article draws on the ethnography of Aboriginal Australia to argue that perceptual openness, extending from waking life into dreaming experience, provides an important cognitive framework for the apprehension of dreamt experience in these contexts. I argue that this perceptual openness is analogous to the "openness to experience" described as a personality trait that had been linked with dream recall frequency (among other things). An implication of identifying perceptual openness at a cultural rather than at an individual level is two-fold. It provides an example of the ways in which cultural differences affect perception, indicative of cognitive diversity; and, given the relationship between dreams and creativity suggested anecdotally and through research, a cultural orientation toward perceptual openness is also likely to have implications for the realization of creativity that occurs through dreams. Such creativity though cannot be separated from the relational context in which such dreamt material is elaborated and understood. Copyright © 2015 Cognitive Science Society, Inc.
The Value of Metrics for Science Data Center Management
Moses, J.; Behnke, J.; Watts, T. H.; Lu, Y.
2005-12-01
The Earth Observing System Data and Information System (EOSDIS) has been collecting and analyzing records of science data archive, processing and product distribution for more than 10 years. The types of information collected and the analysis performed has matured and progressed to become an integral and necessary part of the system management and planning functions. Science data center managers are realizing the importance that metrics can play in influencing and validating their business model. New efforts focus on better understanding of users and their methods. Examples include tracking user web site interactions and conducting user surveys such as the government authorized American Customer Satisfaction Index survey. This paper discusses the metrics methodology, processes and applications that are growing in EOSDIS, the driving requirements and compelling events, and the future envisioned for metrics as an integral part of earth science data systems.
METRICS DEVELOPMENT FOR PATENTS.
Veiga, Daniela Francescato; Ferreira, Lydia Masako
2015-01-01
To develop a proposal for metrics for patents to be applied in assessing the postgraduate programs of Medicine III - Capes. From the reading and analysis of the 2013 area documents of all the 48 areas of Capes, a proposal for metrics for patents was developed to be applied in Medicine III programs. Except for the areas Biotechnology, Food Science, Biological Sciences III, Physical Education, Engineering I, III and IV and Interdisciplinary, most areas do not adopt a scoring system for patents. The proposal developed was based on the criteria of Biotechnology, with adaptations. In general, it will be valued, in ascending order, the deposit, the granting and licensing/production. It will also be assigned higher scores to patents registered abroad and whenever there is a participation of students. This proposal can be applied to the item Intellectual Production of the evaluation form, in subsection Technical Production/Patents. The percentage of 10% for academic programs and 40% for Masters Professionals should be maintained. The program will be scored as Very Good when it reaches 400 points or over; Good, between 200 and 399 points; Regular, between 71 and 199 points; Weak up to 70 points; Insufficient, no punctuation. Desenvolver uma proposta de métricas para patentes a serem aplicadas na avaliação dos Programas de Pós-Graduação da Área Medicina III - Capes. A partir da leitura e análise dos documentos de área de 2013 de todas as 48 Áreas da Capes, desenvolveu-se uma proposta de métricas para patentes, a ser aplicada na avaliação dos programas da área. Constatou-se que, com exceção das áreas Biotecnologia, Ciência de Alimentos, Ciências Biológicas III, Educação Física, Engenharias I, III e IV e Interdisciplinar, a maioria não adota sistema de pontuação para patentes. A proposta desenvolvida baseou-se nos critérios da Biotecnologia, com adaptações. De uma forma geral, foi valorizado, em ordem crescente, o depósito, a concessão e o
Metric-Aware Secure Service Orchestration
Directory of Open Access Journals (Sweden)
Gabriele Costa
2012-12-01
Full Text Available Secure orchestration is an important concern in the internet of service. Next to providing the required functionality the composite services must also provide a reasonable level of security in order to protect sensitive data. Thus, the orchestrator has a need to check whether the complex service is able to satisfy certain properties. Some properties are expressed with metrics for precise definition of requirements. Thus, the problem is to analyse the values of metrics for a complex business process. In this paper we extend our previous work on analysis of secure orchestration with quantifiable properties. We show how to define, verify and enforce quantitative security requirements in one framework with other security properties. The proposed approach should help to select the most suitable service architecture and guarantee fulfilment of the declared security requirements.
Candelas, Philip; de la Ossa, Xenia; McOrist, Jock
2017-12-01
Heterotic vacua of string theory are realised, at large radius, by a compact threefold with vanishing first Chern class together with a choice of stable holomorphic vector bundle. These form a wide class of potentially realistic four-dimensional vacua of string theory. Despite all their phenomenological promise, there is little understanding of the metric on the moduli space of these. What is sought is the analogue of special geometry for these vacua. The metric on the moduli space is important in phenomenology as it normalises D-terms and Yukawa couplings. It is also of interest in mathematics, since it generalises the metric, first found by Kobayashi, on the space of gauge field connections, to a more general context. Here we construct this metric, correct to first order in {α^{\\backprime}}, in two ways: first by postulating a metric that is invariant under background gauge transformations of the gauge field, and also by dimensionally reducing heterotic supergravity. These methods agree and the resulting metric is Kähler, as is required by supersymmetry. Checking the metric is Kähler is intricate and the anomaly cancellation equation for the H field plays an essential role. The Kähler potential nevertheless takes a remarkably simple form: it is the Kähler potential of special geometry with the Kähler form replaced by the {α^{\\backprime}}-corrected hermitian form.
Implications of Metric Choice for Common Applications of Readmission Metrics
Davies, Sheryl; Saynina, Olga; Schultz, Ellen; McDonald, Kathryn M; Baker, Laurence C
2013-01-01
Objective. To quantify the differential impact on hospital performance of three readmission metrics: all-cause readmission (ACR), 3M Potential Preventable Readmission (PPR), and Centers for Medicare and Medicaid 30-day readmission (CMS).
Analytical Cost Metrics : Days of Future Past
Energy Technology Data Exchange (ETDEWEB)
Prajapati, Nirmal [Colorado State Univ., Fort Collins, CO (United States); Rajopadhye, Sanjay [Colorado State Univ., Fort Collins, CO (United States); Djidjev, Hristo Nikolov [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2018-02-20
As we move towards the exascale era, the new architectures must be capable of running the massive computational problems efficiently. Scientists and researchers are continuously investing in tuning the performance of extreme-scale computational problems. These problems arise in almost all areas of computing, ranging from big data analytics, artificial intelligence, search, machine learning, virtual/augmented reality, computer vision, image/signal processing to computational science and bioinformatics. With Moore’s law driving the evolution of hardware platforms towards exascale, the dominant performance metric (time efficiency) has now expanded to also incorporate power/energy efficiency. Therefore the major challenge that we face in computing systems research is: “how to solve massive-scale computational problems in the most time/power/energy efficient manner?”
Generalized Painleve-Gullstrand metrics
Energy Technology Data Exchange (ETDEWEB)
Lin Chunyu [Department of Physics, National Cheng Kung University, Tainan 70101, Taiwan (China)], E-mail: l2891112@mail.ncku.edu.tw; Soo Chopin [Department of Physics, National Cheng Kung University, Tainan 70101, Taiwan (China)], E-mail: cpsoo@mail.ncku.edu.tw
2009-02-02
An obstruction to the implementation of spatially flat Painleve-Gullstrand (PG) slicings is demonstrated, and explicitly discussed for Reissner-Nordstroem and Schwarzschild-anti-deSitter spacetimes. Generalizations of PG slicings which are not spatially flat but which remain regular at the horizons are introduced. These metrics can be obtained from standard spherically symmetric metrics by physical Lorentz boosts. With these generalized PG metrics, problematic contributions to the imaginary part of the action in the Parikh-Wilczek derivation of Hawking radiation due to the obstruction can be avoided.
Daylight metrics and energy savings
Energy Technology Data Exchange (ETDEWEB)
Mardaljevic, John; Heschong, Lisa; Lee, Eleanor
2009-12-31
The drive towards sustainable, low-energy buildings has increased the need for simple, yet accurate methods to evaluate whether a daylit building meets minimum standards for energy and human comfort performance. Current metrics do not account for the temporal and spatial aspects of daylight, nor of occupants comfort or interventions. This paper reviews the historical basis of current compliance methods for achieving daylit buildings, proposes a technical basis for development of better metrics, and provides two case study examples to stimulate dialogue on how metrics can be applied in a practical, real-world context.
Realizing "value-added" metrology
Bunday, Benjamin; Lipscomb, Pete; Allgair, John; Patel, Dilip; Caldwell, Mark; Solecky, Eric; Archie, Chas; Morningstar, Jennifer; Rice, Bryan J.; Singh, Bhanwar; Cain, Jason; Emami, Iraj; Banke, Bill, Jr.; Herrera, Alfredo; Ukraintsev, Vladamir; Schlessinger, Jerry; Ritchison, Jeff
2007-03-01
The conventional premise that metrology is a "non-value-added necessary evil" is a misleading and dangerous assertion, which must be viewed as obsolete thinking. Many metrology applications are key enablers to traditionally labeled "value-added" processing steps in lithography and etch, such that they can be considered integral parts of the processes. Various key trends in modern, state-of-the-art processing such as optical proximity correction (OPC), design for manufacturability (DFM), and advanced process control (APC) are based, at their hearts, on the assumption of fine-tuned metrology, in terms of uncertainty and accuracy. These trends are vehicles where metrology thus has large opportunities to create value through the engineering of tight and targetable process distributions. Such distributions make possible predictability in speed-sorts and in other parameters, which results in high-end product. Additionally, significant reliance has also been placed on defect metrology to predict, improve, and reduce yield variability. The necessary quality metrology is strongly influenced by not only the choice of equipment, but also the quality application of these tools in a production environment. The ultimate value added by metrology is a result of quality tools run by a quality metrology team using quality practices. This paper will explore the relationships among present and future trends and challenges in metrology, including equipment, key applications, and metrology deployment in the manufacturing flow. Of key importance are metrology personnel, with their expertise, practices, and metrics in achieving and maintaining the required level of metrology performance, including where precision, matching, and accuracy fit into these considerations. The value of metrology will be demonstrated to have shifted to "key enabler of large revenues," debunking the out-of-date premise that metrology is "non-value-added." Examples used will be from critical dimension (CD
An accurate metric for the spacetime around rotating neutron stars
Pappas, George
2017-04-01
The problem of having an accurate description of the spacetime around rotating neutron stars is of great astrophysical interest. For astrophysical applications, one needs to have a metric that captures all the properties of the spacetime around a rotating neutron star. Furthermore, an accurate appropriately parametrized metric, I.e. a metric that is given in terms of parameters that are directly related to the physical structure of the neutron star, could be used to solve the inverse problem, which is to infer the properties of the structure of a neutron star from astrophysical observations. In this work, we present such an approximate stationary and axisymmetric metric for the exterior of rotating neutron stars, which is constructed using the Ernst formalism and is parametrized by the relativistic multipole moments of the central object. This metric is given in terms of an expansion on the Weyl-Papapetrou coordinates with the multipole moments as free parameters and is shown to be extremely accurate in capturing the physical properties of a neutron star spacetime as they are calculated numerically in general relativity. Because the metric is given in terms of an expansion, the expressions are much simpler and easier to implement, in contrast to previous approaches. For the parametrization of the metric in general relativity, the recently discovered universal 3-hair relations are used to produce a three-parameter metric. Finally, a straightforward extension of this metric is given for scalar-tensor theories with a massless scalar field, which also admit a formulation in terms of an Ernst potential.
Next-Generation Metrics: Responsible Metrics & Evaluation for Open Science
Energy Technology Data Exchange (ETDEWEB)
Wilsdon, J.; Bar-Ilan, J.; Peters, I.; Wouters, P.
2016-07-01
Metrics evoke a mixed reaction from the research community. A commitment to using data to inform decisions makes some enthusiastic about the prospect of granular, real-time analysis o of research and its wider impacts. Yet we only have to look at the blunt use of metrics such as journal impact factors, h-indices and grant income targets, to be reminded of the pitfalls. Some of the most precious qualities of academic culture resist simple quantification, and individual indicators often struggle to do justice to the richness and plurality of research. Too often, poorly designed evaluation criteria are “dominating minds, distorting behaviour and determining careers (Lawrence, 2007).” Metrics hold real power: they are constitutive of values, identities and livelihoods. How to exercise that power to more positive ends has been the focus of several recent and complementary initiatives, including the San Francisco Declaration on Research Assessment (DORA1), the Leiden Manifesto2 and The Metric Tide3 (a UK government review of the role of metrics in research management and assessment). Building on these initiatives, the European Commission, under its new Open Science Policy Platform4, is now looking to develop a framework for responsible metrics for research management and evaluation, which can be incorporated into the successor framework to Horizon 2020. (Author)
Problems of Public Initiatives Realization in the Russian Federation
Directory of Open Access Journals (Sweden)
Guziy A. E.
2013-10-01
Full Text Available The article reads about the institute of public initiatives in the Russian Federation. The comparative law analysis of this form of democracy with the analogous institute in the United States of America has been conducted.
Reputational Capital of the Modern Russia: Formation and Realization Problems
Directory of Open Access Journals (Sweden)
O. E. Grishin
2015-01-01
Full Text Available Design and implementation of reputational capital allows you to gain an advantage over other equal participants of the political process: to increase the effectiveness of different types of agreements, strengthen mutually beneficial cooperation with other countries to attract foreign investment, maintain the loyalty of domestic business. Reputation - one of the main factors to predict the behavior of the state in domestic and foreign policy.
Zimmerman, Marianna
1975-01-01
Describes a classroom activity which involved sixth grade students in a learning situation including making ice cream, safety procedures in a science laboratory, calibrating a thermometer, using metric units of volume and mass. (EB)
A Realization Approach for Residual Expressions
DEFF Research Database (Denmark)
Skovmose Kallesøe, Carsten; Izadi-Zamanabadi, Roozbeh; Wisniewski, Rafal
2006-01-01
This paper is concerned with state space realization of inherent redundant information in subsystems, which are identified by structural analysis (SA) approach. The identified subsystems are assumed to involve algebraic variables, representing unknown signals. The proposed realization method...
Realization of an integral using anticommuting variables
International Nuclear Information System (INIS)
Valuev, B.N.
1979-01-01
It is shown that the integral defined by Berezin over anticommuting variables may be realized as a trace on the Clifford algebra. In fact, this realization makes precise the definition of the integral
Experiential space is hardly metric
Czech Academy of Sciences Publication Activity Database
Šikl, Radovan; Šimeček, Michal; Lukavský, Jiří
2008-01-01
Roč. 2008, č. 37 (2008), s. 58-58 ISSN 0301-0066. [European Conference on Visual Perception. 24.08-28.08.2008, Utrecht] R&D Projects: GA ČR GA406/07/1676 Institutional research plan: CEZ:AV0Z70250504 Keywords : visual space perception * metric and non-metric perceptual judgments * ecological validity Subject RIV: AN - Psychology
Coverage Metrics for Model Checking
Penix, John; Visser, Willem; Norvig, Peter (Technical Monitor)
2001-01-01
When using model checking to verify programs in practice, it is not usually possible to achieve complete coverage of the system. In this position paper we describe ongoing research within the Automated Software Engineering group at NASA Ames on the use of test coverage metrics to measure partial coverage and provide heuristic guidance for program model checking. We are specifically interested in applying and developing coverage metrics for concurrent programs that might be used to support certification of next generation avionics software.
Phantom metrics with Killing spinors
Directory of Open Access Journals (Sweden)
W.A. Sabra
2015-11-01
Full Text Available We study metric solutions of Einstein–anti-Maxwell theory admitting Killing spinors. The analogue of the IWP metric which admits a space-like Killing vector is found and is expressed in terms of a complex function satisfying the wave equation in flat (2+1-dimensional space–time. As examples, electric and magnetic Kasner spaces are constructed by allowing the solution to depend only on the time coordinate. Euclidean solutions are also presented.
Primitive recursive realizability and basic propositional logic
Plisko, Valery
2007-01-01
Two notions of primitive recursive realizability for arithmetic sentences are considered. The first one is strictly primitive recursive realizability introduced by Z. Damnjanovic in 1994. We prove that intuitionistic predicate logic is not sound with this kind of realizability. Namely there
Metric inequalities for polygons
Directory of Open Access Journals (Sweden)
Adrian Dumitrescu
2013-07-01
Full Text Available Let A1,A2,…,An be the vertices of a polygon with unit perimeter, that is Σi |Ai Ai+1|=1. We derive various tight estimates on the minimum and maximum values of the sum of pairwise distances, and respectively sum of pairwise squared distances among its vertices. In most cases such estimates on these sums in the literature were known only for convex polygons.In the second part, we turn to a problem of Braß regarding the maximum perimeter of a simplen-gon (n odd contained in a disk of unit radius. The problem was recently solved by Audet et al. 2009, who gave an exact formula. Here we present an alternative simpler proof of this formula. We then examine what happens if the simplicity condition is dropped, and obtain an exact formula for the maximum perimeter in this case as well.
Multi-Robot Assembly Strategies and Metrics
MARVEL, JEREMY A.; BOSTELMAN, ROGER; FALCO, JOE
2018-01-01
We present a survey of multi-robot assembly applications and methods and describe trends and general insights into the multi-robot assembly problem for industrial applications. We focus on fixtureless assembly strategies featuring two or more robotic systems. Such robotic systems include industrial robot arms, dexterous robotic hands, and autonomous mobile platforms, such as automated guided vehicles. In this survey, we identify the types of assemblies that are enabled by utilizing multiple robots, the algorithms that synchronize the motions of the robots to complete the assembly operations, and the metrics used to assess the quality and performance of the assemblies. PMID:29497234
Multi-Robot Assembly Strategies and Metrics.
Marvel, Jeremy A; Bostelman, Roger; Falco, Joe
2018-02-01
We present a survey of multi-robot assembly applications and methods and describe trends and general insights into the multi-robot assembly problem for industrial applications. We focus on fixtureless assembly strategies featuring two or more robotic systems. Such robotic systems include industrial robot arms, dexterous robotic hands, and autonomous mobile platforms, such as automated guided vehicles. In this survey, we identify the types of assemblies that are enabled by utilizing multiple robots, the algorithms that synchronize the motions of the robots to complete the assembly operations, and the metrics used to assess the quality and performance of the assemblies.
Canonical realizations of B2 approximately C2 Lie algebras
International Nuclear Information System (INIS)
Iosifescu, M.; Scutaru, H.
1982-12-01
Canonical realizations associated to subrepresentations of ad x ad, for B 2 apppoximately C 2 semisimple Lie algebras, have been determined. An algebraic foundation has been obtained for the constraints satisfied by the dinamical variables of the classical limit of the generalized Helium problem. (authors)
Realization of economic evaluation expert system for uranium mine project
International Nuclear Information System (INIS)
Wang Haifeng
1993-01-01
By studying the EVALUATOR, economic evaluation expert system of uranium mine project, the theoretical fundamentals of expert system, principle of inference mechanism, implementation of knowledge base, realization of explanation mechanism, acquisition of domain knowledge and representation of knowledge were described, especially the subjective Bayes approach for inexact reasoning problem used in EVALUATOR was discussed in detail
Research on cardiovascular disease prediction based on distance metric learning
Ni, Zhuang; Liu, Kui; Kang, Guixia
2018-04-01
Distance metric learning algorithm has been widely applied to medical diagnosis and exhibited its strengths in classification problems. The k-nearest neighbour (KNN) is an efficient method which treats each feature equally. The large margin nearest neighbour classification (LMNN) improves the accuracy of KNN by learning a global distance metric, which did not consider the locality of data distributions. In this paper, we propose a new distance metric algorithm adopting cosine metric and LMNN named COS-SUBLMNN which takes more care about local feature of data to overcome the shortage of LMNN and improve the classification accuracy. The proposed methodology is verified on CVDs patient vector derived from real-world medical data. The Experimental results show that our method provides higher accuracy than KNN and LMNN did, which demonstrates the effectiveness of the Risk predictive model of CVDs based on COS-SUBLMNN.
Classical realizability in the CPS target language
DEFF Research Database (Denmark)
Frey, Jonas
2016-01-01
Motivated by considerations about Krivine's classical realizability, we introduce a term calculus for an intuitionistic logic with record types, which we call the CPS target language. We give a reformulation of the constructions of classical realizability in this language, using the categorical...... techniques of realizability triposes and toposes. We argue that the presentation of classical realizability in the CPS target language simplifies calculations in realizability toposes, in particular it admits a nice presentation of conjunction as intersection type which is inspired by Girard's ludics....
Explicit field realizations of W algebras
International Nuclear Information System (INIS)
Wei Shaowen; Liu Yuxiao; Ren Jirong; Zhang Lijie
2009-01-01
The fact that certain nonlinear W 2,s algebras can be linearized by the inclusion of a spin-1 current can provide a simple way to realize W 2,s algebras from linear W 1,2,s algebras. In this paper, we first construct the explicit field realizations of linear W 1,2,s algebras with double scalar and double spinor, respectively. Then, after a change of basis, the realizations of W 2,s algebras are presented. The results show that all these realizations are Romans-type realizations.
Explicit field realizations of W algebras
Wei, Shao-Wen; Liu, Yu-Xiao; Zhang, Li-Jie; Ren, Ji-Rong
2009-01-01
The fact that certain non-linear $W_{2,s}$ algebras can be linearized by the inclusion of a spin-1 current can provide a simple way to realize $W_{2,s}$ algebras from linear $W_{1,2,s}$ algebras. In this paper, we first construct the explicit field realizations of linear $W_{1,2,s}$ algebras with double-scalar and double-spinor, respectively. Then, after a change of basis, the realizations of $W_{2,s}$ algebras are presented. The results show that all these realizations are Romans-type realiz...
Organizational learning perspective on continuous improvement and innovation in product realization
DEFF Research Database (Denmark)
Møller, Christina Villefrance
with cross-functional collaboration in solving problems that subsequently restraining continuous improvement and innovation (CII) in product realization. This research project apply an organizational learning perspective on cross-functional problem solving in product realization processes. The research...... project has two main objectives, first to develop and test a CIIprogram that integrates cross-functional work practices into product realization. The second objective is to enhance understanding of organizational learning processes in cross-functional and multilevel settings within manufacturing....
Scalar-metric and scalar-metric-torsion gravitational theories
International Nuclear Information System (INIS)
Aldersley, S.J.
1977-01-01
The techniques of dimensional analysis and of the theory of tensorial concomitants are employed to study field equations in gravitational theories which incorporate scalar fields of the Brans-Dicke type. Within the context of scalar-metric gravitational theories, a uniqueness theorem for the geometric (or gravitational) part of the field equations is proven and a Lagrangian is determined which is uniquely specified by dimensional analysis. Within the context of scalar-metric-torsion gravitational theories a uniqueness theorem for field Lagrangians is presented and the corresponding Euler-Lagrange equations are given. Finally, an example of a scalar-metric-torsion theory is presented which is similar in many respects to the Brans-Dicke theory and the Einstein-Cartan theory
Don't Trust a Management Metric, Especially in Life Support
Jones, Harry W.
2014-01-01
Goodhart's law states that metrics do not work. Metrics become distorted when used and they deflect effort away from more important goals. These well-known and unavoidable problems occurred when the closure and system mass metrics were used to manage life support research. The intent of life support research should be to develop flyable, operable, reliable systems, not merely to increase life support system closure or to reduce its total mass. It would be better to design life support systems to meet the anticipated mission requirements and user needs. Substituting the metrics of closure and total mass for these goals seems to have led life support research to solve the wrong problems.
Symmetries of Taub-NUT dual metrics
International Nuclear Information System (INIS)
Baleanu, D.; Codoban, S.
1998-01-01
Recently geometric duality was analyzed for a metric which admits Killing tensors. An interesting example arises when the manifold has Killing-Yano tensors. The symmetries of the dual metrics in the case of Taub-NUT metric are investigated. Generic and non-generic symmetries of dual Taub-NUT metric are analyzed
International Nuclear Information System (INIS)
Vaidya, P.C.; Patel, L.K.; Bhatt, P.V.
1976-01-01
Using Galilean time and retarded distance as coordinates the usual Kerr metric is expressed in form similar to the Newman-Unti-Tamburino (NUT) metric. The combined Kerr-NUT metric is then investigated. In addition to the Kerr and NUT solutions of Einstein's equations, three other types of solutions are derived. These are (i) the radiating Kerr solution, (ii) the radiating NUT solution satisfying Rsub(ik) = sigmaxisub(i)xisub(k), xisub(i)xisup(i) = 0, and (iii) the associated Kerr solution satisfying Rsub(ik) = 0. Solution (i) is distinct from and simpler than the one reported earlier by Vaidya and Patel (Phys. Rev.; D7:3590 (1973)). Solutions (ii) and (iii) gave line elements which have the axis of symmetry as a singular line. (author)
Complexity Metrics for Workflow Nets
DEFF Research Database (Denmark)
Lassen, Kristian Bisgaard; van der Aalst, Wil M.P.
2009-01-01
analysts have difficulties grasping the dynamics implied by a process model. Recent empirical studies show that people make numerous errors when modeling complex business processes, e.g., about 20 percent of the EPCs in the SAP reference model have design flaws resulting in potential deadlocks, livelocks......, etc. It seems obvious that the complexity of the model contributes to design errors and a lack of understanding. It is not easy to measure complexity, however. This paper presents three complexity metrics that have been implemented in the process analysis tool ProM. The metrics are defined...... for a subclass of Petri nets named Workflow nets, but the results can easily be applied to other languages. To demonstrate the applicability of these metrics, we have applied our approach and tool to 262 relatively complex Protos models made in the context of various student projects. This allows us to validate...
The uniqueness of the Fisher metric as information metric
Czech Academy of Sciences Publication Activity Database
Le, Hong-Van
2017-01-01
Roč. 69, č. 4 (2017), s. 879-896 ISSN 0020-3157 Institutional support: RVO:67985840 Keywords : Chentsov’s theorem * mixed topology * monotonicity of the Fisher metric Subject RIV: BA - General Mathematics OBOR OECD: Pure mathematics Impact factor: 1.049, year: 2016 https://link.springer.com/article/10.1007%2Fs10463-016-0562-0
Invariant metrics for Hamiltonian systems
International Nuclear Information System (INIS)
Rangarajan, G.; Dragt, A.J.; Neri, F.
1991-05-01
In this paper, invariant metrics are constructed for Hamiltonian systems. These metrics give rise to norms on the space of homeogeneous polynomials of phase-space variables. For an accelerator lattice described by a Hamiltonian, these norms characterize the nonlinear content of the lattice. Therefore, the performance of the lattice can be improved by minimizing the norm as a function of parameters describing the beam-line elements in the lattice. A four-fold increase in the dynamic aperture of a model FODO cell is obtained using this procedure. 7 refs
Generalization of Vaidya's radiation metric
Energy Technology Data Exchange (ETDEWEB)
Gleiser, R J; Kozameh, C N [Universidad Nacional de Cordoba (Argentina). Instituto de Matematica, Astronomia y Fisica
1981-11-01
In this paper it is shown that if Vaidya's radiation metric is considered from the point of view of kinetic theory in general relativity, the corresponding phase space distribution function can be generalized in a particular way. The new family of spherically symmetric radiation metrics obtained contains Vaidya's as a limiting situation. The Einstein field equations are solved in a ''comoving'' coordinate system. Two arbitrary functions of a single variable are introduced in the process of solving these equations. Particular examples considered are a stationary solution, a nonvacuum solution depending on a single parameter, and several limiting situations.
Network Community Detection on Metric Space
Directory of Open Access Journals (Sweden)
Suman Saha
2015-08-01
Full Text Available Community detection in a complex network is an important problem of much interest in recent years. In general, a community detection algorithm chooses an objective function and captures the communities of the network by optimizing the objective function, and then, one uses various heuristics to solve the optimization problem to extract the interesting communities for the user. In this article, we demonstrate the procedure to transform a graph into points of a metric space and develop the methods of community detection with the help of a metric defined for a pair of points. We have also studied and analyzed the community structure of the network therein. The results obtained with our approach are very competitive with most of the well-known algorithms in the literature, and this is justified over the large collection of datasets. On the other hand, it can be observed that time taken by our algorithm is quite less compared to other methods and justifies the theoretical findings.
Technical Privacy Metrics: a Systematic Survey
Wagner, Isabel; Eckhoff, David
2018-01-01
The file attached to this record is the author's final peer reviewed version The goal of privacy metrics is to measure the degree of privacy enjoyed by users in a system and the amount of protection offered by privacy-enhancing technologies. In this way, privacy metrics contribute to improving user privacy in the digital world. The diversity and complexity of privacy metrics in the literature makes an informed choice of metrics challenging. As a result, instead of using existing metrics, n...
Directory of Open Access Journals (Sweden)
Bessem Samet
2013-01-01
Full Text Available In 2005, Mustafa and Sims (2006 introduced and studied a new class of generalized metric spaces, which are called G-metric spaces, as a generalization of metric spaces. We establish some useful propositions to show that many fixed point theorems on (nonsymmetric G-metric spaces given recently by many authors follow directly from well-known theorems on metric spaces. Our technique can be easily extended to other results as shown in application.
DLA Energy Biofuel Feedstock Metrics Study
2012-12-11
moderately/highly in- vasive Metric 2: Genetically modified organism ( GMO ) hazard, Yes/No and Hazard Category Metric 3: Species hybridization...4– biofuel distribution Stage # 5– biofuel use Metric 1: State inva- siveness ranking Yes Minimal Minimal No No Metric 2: GMO hazard Yes...may utilize GMO microbial or microalgae species across the applicable biofuel life cycles (stages 1–3). The following consequence Metrics 4–6 then
Nonlinear Semi-Supervised Metric Learning Via Multiple Kernels and Local Topology.
Li, Xin; Bai, Yanqin; Peng, Yaxin; Du, Shaoyi; Ying, Shihui
2018-03-01
Changing the metric on the data may change the data distribution, hence a good distance metric can promote the performance of learning algorithm. In this paper, we address the semi-supervised distance metric learning (ML) problem to obtain the best nonlinear metric for the data. First, we describe the nonlinear metric by the multiple kernel representation. By this approach, we project the data into a high dimensional space, where the data can be well represented by linear ML. Then, we reformulate the linear ML by a minimization problem on the positive definite matrix group. Finally, we develop a two-step algorithm for solving this model and design an intrinsic steepest descent algorithm to learn the positive definite metric matrix. Experimental results validate that our proposed method is effective and outperforms several state-of-the-art ML methods.
Measures of agreement between computation and experiment:validation metrics.
Energy Technology Data Exchange (ETDEWEB)
Barone, Matthew Franklin; Oberkampf, William Louis
2005-08-01
With the increasing role of computational modeling in engineering design, performance estimation, and safety assessment, improved methods are needed for comparing computational results and experimental measurements. Traditional methods of graphically comparing computational and experimental results, though valuable, are essentially qualitative. Computable measures are needed that can quantitatively compare computational and experimental results over a range of input, or control, variables and sharpen assessment of computational accuracy. This type of measure has been recently referred to as a validation metric. We discuss various features that we believe should be incorporated in a validation metric and also features that should be excluded. We develop a new validation metric that is based on the statistical concept of confidence intervals. Using this fundamental concept, we construct two specific metrics: one that requires interpolation of experimental data and one that requires regression (curve fitting) of experimental data. We apply the metrics to three example problems: thermal decomposition of a polyurethane foam, a turbulent buoyant plume of helium, and compressibility effects on the growth rate of a turbulent free-shear layer. We discuss how the present metrics are easily interpretable for assessing computational model accuracy, as well as the impact of experimental measurement uncertainty on the accuracy assessment.
Realizing the potential of nuclear energy
International Nuclear Information System (INIS)
Walske, C.
1982-01-01
The future of nuclear power, just as the future of America, can be viewed with optimism. There is hope in America's record of overcoming obstacles, but growth is essential for that hope to be realized. Despite the downturn in energy demand made possible by conservation, we will need a 35% growth in total energy for new workers and production. Electricity generated by nuclear or coal can make US production more cost-competitive, and it can power mass-transit systems, electric heat pumps, and communications and information systems. Changes in electricity and gross national product (GNP) have been more closely in step since 1973 than have total energy and GNP. The nuclear power units now under construction will add 80,000 megawatts to the 56,000 now on line. It is important to note that, while utilities are cancelling plans for nuclear plants, they aren't ordering new coal plants, which shows the impact of the high cost of money. Interest rates must come down and public-relations efforts to sell electricity must improve to change the situation. Although capital shortages are real, waste disposal is a problem of perception that was politically induced because the government failed to provide a demonstration of safety as the French are doing. Streamlined regulatory and insurance procedures can help to justify optimism in the nuclear option. 4 figures
Separable metrics and radiating stars
Indian Academy of Sciences (India)
We study the junction condition relating the pressure to heat flux at the boundary of an accelerating and expanding spherically symmetric radiating star. We transform the junction condition to an ordinary differential equation by making a separability assumption on the metric functions in the space–time variables.
Socio-technical security metrics
Gollmann, D.; Herley, C.; Koenig, V.; Pieters, W.; Sasse, M.A.
2015-01-01
Report from Dagstuhl seminar 14491. This report documents the program and the outcomes of Dagstuhl Seminar 14491 “Socio-Technical Security Metrics”. In the domain of safety, metrics inform many decisions, from the height of new dikes to the design of nuclear plants. We can state, for example, that
Leading Gainful Employment Metric Reporting
Powers, Kristina; MacPherson, Derek
2016-01-01
This chapter will address the importance of intercampus involvement in reporting of gainful employment student-level data that will be used in the calculation of gainful employment metrics by the U.S. Department of Education. The authors will discuss why building relationships within the institution is critical for effective gainful employment…
Simple model of variation of the signature of a space-time metric
International Nuclear Information System (INIS)
Konstantinov, M.Yu.
2004-01-01
The problem on the changes in the space-time signature metrics is discussed. The simple model, wherein the space-time metrics signature is determined by the nonlinear scalar field, is proposed. It is shown that both classical and quantum description of changes in the metrics signature is possible within the frames of the considered model; the most characteristic peculiarities and variations of the classical and quantum descriptions are also briefly noted [ru
Isometric immersions and embeddings of locally Euclidean metrics in R2
International Nuclear Information System (INIS)
Sabitov, I Kh
1999-01-01
This paper deals with the problem of isometric immersions and embeddings of two-dimensional locally Euclidean metrics in the Euclidean plane. We find explicit formulae for the immersions of metrics defined on a simply connected domain and a number of sufficient conditions for the existence of isometric embeddings. In the case when the domain is multiply connected we find necessary conditions for the existence of isometric immersions and classify the cases when the metric admits no isometric immersion in the Euclidean plane
Management of purchase process in realization of building investment
Directory of Open Access Journals (Sweden)
M. Radoń
2010-07-01
Full Text Available In building companies process of product and service purchase is one of the main processes of quality management system [1]. Because ofshort time-limits of contract realization, high specialization of works, necessity of fulfillment of high quality requirements and assurance of profitable financial effects the management of purchase process becomes very important element of work of the building company. The serious problem in creating and keeping the efficient system of purchase management is special type of purchase in building companies. Particular investments are realized in different country regions, objects are built based on the individual design documentations and each building becomes independent organization unit that organize purchase necessary for investment realization.An example of the management system of purchase process in building company is described in the paper. Just In Time system is widelyused during the realization of building investment. This system is especially useful in buildings because some investments, especially inbig cities, are characterized by restriction in building site. This makes impossible storing the products. In such cases close synchronization between times of delivery and requirements of purchase schedule and schedule of building realization is very important. Criteria of supplier selection as well as the methods of choosing the supplier are also presented in the paper. Special attention is paid to necessity of valuation of the purchase efficiency and the purchase risk. Basic coefficients of purchase efficiency are also described in the paper.
Best Proximity Point Results in Complex Valued Metric Spaces
Directory of Open Access Journals (Sweden)
Binayak S. Choudhury
2014-01-01
complex valued metric spaces. We treat the problem as that of finding the global optimal solution of a fixed point equation although the exact solution does not in general exist. We also define and use the concept of P-property in such spaces. Our results are illustrated with examples.
Optimal recovery of linear operators in non-Euclidean metrics
Energy Technology Data Exchange (ETDEWEB)
Osipenko, K Yu [Moscow State Aviation Technological University, Moscow (Russian Federation)
2014-10-31
The paper looks at problems concerning the recovery of operators from noisy information in non-Euclidean metrics. A number of general theorems are proved and applied to recovery problems for functions and their derivatives from the noisy Fourier transform. In some cases, a family of optimal methods is found, from which the methods requiring the least amount of original information are singled out. Bibliography: 25 titles.
Characterizing granular networks using topological metrics
Dijksman, Joshua A.; Kovalcinova, Lenka; Ren, Jie; Behringer, Robert P.; Kramar, Miroslav; Mischaikow, Konstantin; Kondic, Lou
2018-04-01
We carry out a direct comparison of experimental and numerical realizations of the exact same granular system as it undergoes shear jamming. We adjust the numerical methods used to optimally represent the experimental settings and outcomes up to microscopic contact force dynamics. Measures presented here range from microscopic through mesoscopic to systemwide characteristics of the system. Topological properties of the mesoscopic force networks provide a key link between microscales and macroscales. We report two main findings: (1) The number of particles in the packing that have at least two contacts is a good predictor for the mechanical state of the system, regardless of strain history and packing density. All measures explored in both experiments and numerics, including stress-tensor-derived measures and contact numbers depend in a universal manner on the fraction of nonrattler particles, fNR. (2) The force network topology also tends to show this universality, yet the shape of the master curve depends much more on the details of the numerical simulations. In particular we show that adding force noise to the numerical data set can significantly alter the topological features in the data. We conclude that both fNR and topological metrics are useful measures to consider when quantifying the state of a granular system.
Generating physically realizable stellar structures via embedding
Energy Technology Data Exchange (ETDEWEB)
Maurya, S.K. [University of Nizwa, Department of Mathematical and Physical Sciences, College of Arts and Science, Nizwa (Oman); Govender, M. [Durban University of Technology, Department of Mathematics, Faculty of Applied Sciences, Durban (South Africa)
2017-05-15
In this work we present an exact solution of the Einstein-Maxwell field equations describing compact charged objects within the framework of classical general relativity. Our model is constructed by embedding a four-dimensional spherically symmetric static metric into a five-dimensional flat metric. The source term for the matter field is composed of a perfect fluid distribution with charge. We show that our model obeys all the physical requirements and stability conditions necessary for a realistic stellar model. Our theoretical model approximates observations of neutron stars and pulsars to a very good degree of accuracy. (orig.)
The Agony and the Ecstasy: Teaching Marketing Metrics to Undergraduate Business Students
Saber, Jane Lee; Foster, Mary K.
2011-01-01
The marketing department of a large business school introduced a new undergraduate course, marketing metrics and analysis. The main materials for this course consisted of a series of online spreadsheets with embedded text and practice problems, a 32-page online metrics primer that included assurance of learning questions and a sample examination…
Grading the Metrics: Performance-Based Funding in the Florida State University System
Cornelius, Luke M.; Cavanaugh, Terence W.
2016-01-01
A policy analysis of Florida's 10-factor Performance-Based Funding system for state universities. The focus of the article is on the system of performance metrics developed by the state Board of Governors and their impact on institutions and their missions. The paper also discusses problems and issues with the metrics, their ongoing evolution, and…
Energy Metrics for State Government Buildings
Michael, Trevor
Measuring true progress towards energy conservation goals requires the accurate reporting and accounting of energy consumption. An accurate energy metrics framework is also a critical element for verifiable Greenhouse Gas Inventories. Energy conservation in government can reduce expenditures on energy costs leaving more funds available for public services. In addition to monetary savings, conserving energy can help to promote energy security, air quality, and a reduction of carbon footprint. With energy consumption/GHG inventories recently produced at the Federal level, state and local governments are beginning to also produce their own energy metrics systems. In recent years, many states have passed laws and executive orders which require their agencies to reduce energy consumption. In June 2008, SC state government established a law to achieve a 20% energy usage reduction in state buildings by 2020. This study examines case studies from other states who have established similar goals to uncover the methods used to establish an energy metrics system. Direct energy consumption in state government primarily comes from buildings and mobile sources. This study will focus exclusively on measuring energy consumption in state buildings. The case studies reveal that many states including SC are having issues gathering the data needed to accurately measure energy consumption across all state buildings. Common problems found include a lack of enforcement and incentives that encourage state agencies to participate in any reporting system. The case studies are aimed at finding the leverage used to gather the needed data. The various approaches at coercing participation will hopefully reveal methods that SC can use to establish the accurate metrics system needed to measure progress towards its 20% by 2020 energy reduction goal. Among the strongest incentives found in the case studies is the potential for monetary savings through energy efficiency. Framing energy conservation
Group covariance and metrical theory
International Nuclear Information System (INIS)
Halpern, L.
1983-01-01
The a priori introduction of a Lie group of transformations into a physical theory has often proved to be useful; it usually serves to describe special simplified conditions before a general theory can be worked out. Newton's assumptions of absolute space and time are examples where the Euclidian group and translation group have been introduced. These groups were extended to the Galilei group and modified in the special theory of relativity to the Poincare group to describe physics under the given conditions covariantly in the simplest way. The criticism of the a priori character leads to the formulation of the general theory of relativity. The general metric theory does not really give preference to a particular invariance group - even the principle of equivalence can be adapted to a whole family of groups. The physical laws covariantly inserted into the metric space are however adapted to the Poincare group. 8 references
Chernozhukov, Victor; Hansen, Christian; Spindler, Martin
2016-01-01
In this article the package High-dimensional Metrics (\\texttt{hdm}) is introduced. It is a collection of statistical methods for estimation and quantification of uncertainty in high-dimensional approximately sparse models. It focuses on providing confidence intervals and significance testing for (possibly many) low-dimensional subcomponents of the high-dimensional parameter vector. Efficient estimators and uniformly valid confidence intervals for regression coefficients on target variables (e...
Multi-Metric Sustainability Analysis
Energy Technology Data Exchange (ETDEWEB)
Cowlin, Shannon [National Renewable Energy Lab. (NREL), Golden, CO (United States); Heimiller, Donna [National Renewable Energy Lab. (NREL), Golden, CO (United States); Macknick, Jordan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mann, Margaret [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Jacquelyn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Munoz, David [Colorado School of Mines, Golden, CO (United States)
2014-12-01
A readily accessible framework that allows for evaluating impacts and comparing tradeoffs among factors in energy policy, expansion planning, and investment decision making is lacking. Recognizing this, the Joint Institute for Strategic Energy Analysis (JISEA) funded an exploration of multi-metric sustainability analysis (MMSA) to provide energy decision makers with a means to make more comprehensive comparisons of energy technologies. The resulting MMSA tool lets decision makers simultaneously compare technologies and potential deployment locations.
Sensory Metrics of Neuromechanical Trust.
Softky, William; Benford, Criscillia
2017-09-01
Today digital sources supply a historically unprecedented component of human sensorimotor data, the consumption of which is correlated with poorly understood maladies such as Internet addiction disorder and Internet gaming disorder. Because both natural and digital sensorimotor data share common mathematical descriptions, one can quantify our informational sensorimotor needs using the signal processing metrics of entropy, noise, dimensionality, continuity, latency, and bandwidth. Such metrics describe in neutral terms the informational diet human brains require to self-calibrate, allowing individuals to maintain trusting relationships. With these metrics, we define the trust humans experience using the mathematical language of computational models, that is, as a primitive statistical algorithm processing finely grained sensorimotor data from neuromechanical interaction. This definition of neuromechanical trust implies that artificial sensorimotor inputs and interactions that attract low-level attention through frequent discontinuities and enhanced coherence will decalibrate a brain's representation of its world over the long term by violating the implicit statistical contract for which self-calibration evolved. Our hypersimplified mathematical understanding of human sensorimotor processing as multiscale, continuous-time vibratory interaction allows equally broad-brush descriptions of failure modes and solutions. For example, we model addiction in general as the result of homeostatic regulation gone awry in novel environments (sign reversal) and digital dependency as a sub-case in which the decalibration caused by digital sensorimotor data spurs yet more consumption of them. We predict that institutions can use these sensorimotor metrics to quantify media richness to improve employee well-being; that dyads and family-size groups will bond and heal best through low-latency, high-resolution multisensory interaction such as shared meals and reciprocated touch; and
Metric reconstruction from Weyl scalars
Energy Technology Data Exchange (ETDEWEB)
Whiting, Bernard F; Price, Larry R [Department of Physics, PO Box 118440, University of Florida, Gainesville, FL 32611 (United States)
2005-08-07
The Kerr geometry has remained an elusive world in which to explore physics and delve into the more esoteric implications of general relativity. Following the discovery, by Kerr in 1963, of the metric for a rotating black hole, the most major advance has been an understanding of its Weyl curvature perturbations based on Teukolsky's discovery of separable wave equations some ten years later. In the current research climate, where experiments across the globe are preparing for the first detection of gravitational waves, a more complete understanding than concerns just the Weyl curvature is now called for. To understand precisely how comparatively small masses move in response to the gravitational waves they emit, a formalism has been developed based on a description of the whole spacetime metric perturbation in the neighbourhood of the emission region. Presently, such a description is not available for the Kerr geometry. While there does exist a prescription for obtaining metric perturbations once curvature perturbations are known, it has become apparent that there are gaps in that formalism which are still waiting to be filled. The most serious gaps include gauge inflexibility, the inability to include sources-which are essential when the emitting masses are considered-and the failure to describe the l = 0 and 1 perturbation properties. Among these latter properties of the perturbed spacetime, arising from a point mass in orbit, are the perturbed mass and axial component of angular momentum, as well as the very elusive Carter constant for non-axial angular momentum. A status report is given on recent work which begins to repair these deficiencies in our current incomplete description of Kerr metric perturbations.
Metric reconstruction from Weyl scalars
International Nuclear Information System (INIS)
Whiting, Bernard F; Price, Larry R
2005-01-01
The Kerr geometry has remained an elusive world in which to explore physics and delve into the more esoteric implications of general relativity. Following the discovery, by Kerr in 1963, of the metric for a rotating black hole, the most major advance has been an understanding of its Weyl curvature perturbations based on Teukolsky's discovery of separable wave equations some ten years later. In the current research climate, where experiments across the globe are preparing for the first detection of gravitational waves, a more complete understanding than concerns just the Weyl curvature is now called for. To understand precisely how comparatively small masses move in response to the gravitational waves they emit, a formalism has been developed based on a description of the whole spacetime metric perturbation in the neighbourhood of the emission region. Presently, such a description is not available for the Kerr geometry. While there does exist a prescription for obtaining metric perturbations once curvature perturbations are known, it has become apparent that there are gaps in that formalism which are still waiting to be filled. The most serious gaps include gauge inflexibility, the inability to include sources-which are essential when the emitting masses are considered-and the failure to describe the l = 0 and 1 perturbation properties. Among these latter properties of the perturbed spacetime, arising from a point mass in orbit, are the perturbed mass and axial component of angular momentum, as well as the very elusive Carter constant for non-axial angular momentum. A status report is given on recent work which begins to repair these deficiencies in our current incomplete description of Kerr metric perturbations
Supertrace formulae for nonlinearly realized supersymmetry
Murli, Divyanshu; Yamada, Yusuke
2018-04-01
We derive the general supertrace formula for a system with N chiral superfields and one nilpotent chiral superfield in global and local supersymmetry. The nilpotent multiplet is realized by taking the scalar-decoupling limit of a chiral superfield breaking supersymmetry spontaneously. As we show, however, the modified formula is not simply related to the scalar-decoupling limit of the supertrace in linearly-realized supersymmetry. We also show that the supertrace formula reduces to that of a linearly realized supersymmetric theory with a decoupled sGoldstino if the Goldstino is the fermion in the nilpotent multiplet.
Effects of metric hierarchy and rhyme predictability on word duration in The Cat in the Hat.
Breen, Mara
2018-05-01
Word durations convey many types of linguistic information, including intrinsic lexical features like length and frequency and contextual features like syntactic and semantic structure. The current study was designed to investigate whether hierarchical metric structure and rhyme predictability account for durational variation over and above other features in productions of a rhyming, metrically-regular children's book: The Cat in the Hat (Dr. Seuss, 1957). One-syllable word durations and inter-onset intervals were modeled as functions of segment number, lexical frequency, word class, syntactic structure, repetition, and font emphasis. Consistent with prior work, factors predicting longer word durations and inter-onset intervals included more phonemes, lower frequency, first mention, alignment with a syntactic boundary, and capitalization. A model parameter corresponding to metric grid height improved model fit of word durations and inter-onset intervals. Specifically, speakers realized five levels of metric hierarchy with inter-onset intervals such that interval duration increased linearly with increased height in the metric hierarchy. Conversely, speakers realized only three levels of metric hierarchy with word duration, demonstrating that they shortened the highly predictable rhyme resolutions. These results further understanding of the factors that affect spoken word duration, and demonstrate the myriad cues that children receive about linguistic structure from nursery rhymes. Copyright © 2018 Elsevier B.V. All rights reserved.
Cophenetic metrics for phylogenetic trees, after Sokal and Rohlf.
Cardona, Gabriel; Mir, Arnau; Rosselló, Francesc; Rotger, Lucía; Sánchez, David
2013-01-16
Phylogenetic tree comparison metrics are an important tool in the study of evolution, and hence the definition of such metrics is an interesting problem in phylogenetics. In a paper in Taxon fifty years ago, Sokal and Rohlf proposed to measure quantitatively the difference between a pair of phylogenetic trees by first encoding them by means of their half-matrices of cophenetic values, and then comparing these matrices. This idea has been used several times since then to define dissimilarity measures between phylogenetic trees but, to our knowledge, no proper metric on weighted phylogenetic trees with nested taxa based on this idea has been formally defined and studied yet. Actually, the cophenetic values of pairs of different taxa alone are not enough to single out phylogenetic trees with weighted arcs or nested taxa. For every (rooted) phylogenetic tree T, let its cophenetic vectorφ(T) consist of all pairs of cophenetic values between pairs of taxa in T and all depths of taxa in T. It turns out that these cophenetic vectors single out weighted phylogenetic trees with nested taxa. We then define a family of cophenetic metrics dφ,p by comparing these cophenetic vectors by means of Lp norms, and we study, either analytically or numerically, some of their basic properties: neighbors, diameter, distribution, and their rank correlation with each other and with other metrics. The cophenetic metrics can be safely used on weighted phylogenetic trees with nested taxa and no restriction on degrees, and they can be computed in O(n2) time, where n stands for the number of taxa. The metrics dφ,1 and dφ,2 have positive skewed distributions, and they show a low rank correlation with the Robinson-Foulds metric and the nodal metrics, and a very high correlation with each other and with the splitted nodal metrics. The diameter of dφ,p, for p⩾1 , is in O(n(p+2)/p), and thus for low p they are more discriminative, having a wider range of values.
Use of metrics in an effective ALARA program
International Nuclear Information System (INIS)
Bates, B.B. Jr.
1996-01-01
ALARA radiological protection programs require metrics to meet their objectives. Sources of metrics include external dosimetry; internal dosimetry; radiological occurrences from the occurrence reporting an processing system (ORPS); and radiological incident reports (RIR). The sources themselves contain an abundance of specific open-quotes indicators.close quotes To choose the site-specific indicators that will be tracked and trended requires careful review. Justification is needed to defend the indicators selected and maybe even stronger justification is needed for those indicators that are available, but not chosen as a metric. Historically, the many different sources of information resided in a plethora of locations. Even the same type of metric had data located in different areas and could not be easily totaled for the entire Site. This required the end user to expend valuable time and effort to locate the data they needed. To address this problem, a central metrics database has been developed so that a customer can have all their questions addressed quickly and correctly. The database was developed in the beginning to answer some of the customer's most frequently asked questions. IL is now also a tool to communicate the status of the radiation protection program to facility managers. Finally, it also addresses requirements contained in the Rad Con manual and the 10CFR835 implementation guides. The database uses currently available, open-quotes user friendly,close quotes software and contains information from RIR's, ORPS, and external dosimetry records specific to ALARA performance indicators. The database is expandable to allow new metrics input. Specific reports have been developed to assist customers in their tracking and trending of ALARA metrics. These include quarterly performance indicator reports, monthly radiological incident reports, monthly external dose history and goals tracking reports, and the future use of performance indexing
Crowdsourcing metrics of digital collections
Directory of Open Access Journals (Sweden)
Tuula Pääkkönen
2015-12-01
Full Text Available In the National Library of Finland (NLF there are millions of digitized newspaper and journal pages, which are openly available via the public website http://digi.kansalliskirjasto.fi. To serve users better, last year the front end was completely overhauled with its main aim in crowdsourcing features, e.g., by giving end-users the opportunity to create digital clippings and a personal scrapbook from the digital collections. But how can you know whether crowdsourcing has had an impact? How much crowdsourcing functionalities have been used so far? Did crowdsourcing work? In this paper the statistics and metrics of a recent crowdsourcing effort are analysed across the different digitized material types (newspapers, journals, ephemera. The subjects, categories and keywords given by the users are analysed to see which topics are the most appealing. Some notable public uses of the crowdsourced article clippings are highlighted. These metrics give us indications on how the end-users, based on their own interests, are investigating and using the digital collections. Therefore, the suggested metrics illustrate the versatility of the information needs of the users, varying from citizen science to research purposes. By analysing the user patterns, we can respond to the new needs of the users by making minor changes to accommodate the most active participants, while still making the service more approachable for those who are trying out the functionalities for the first time. Participation in the clippings and annotations can enrich the materials in unexpected ways and can possibly pave the way for opportunities of using crowdsourcing more also in research contexts. This creates more opportunities for the goals of open science since source data becomes available, making it possible for researchers to reach out to the general public for help. In the long term, utilizing, for example, text mining methods can allow these different end-user segments to
Shuler, Robert
2018-04-01
The goal of this paper is to take a completely fresh approach to metric gravity, in which the metric principle is strictly adhered to but its properties in local space-time are derived from conservation principles, not inferred from a global field equation. The global field strength variation then gains some flexibility, but only in the regime of very strong fields (2nd-order terms) whose measurement is now being contemplated. So doing provides a family of similar gravities, differing only in strong fields, which could be developed into meaningful verification targets for strong fields after the manner in which far-field variations were used in the 20th century. General Relativity (GR) is shown to be a member of the family and this is demonstrated by deriving the Schwarzschild metric exactly from a suitable field strength assumption. The method of doing so is interesting in itself because it involves only one differential equation rather than the usual four. Exact static symmetric field solutions are also given for one pedagogical alternative based on potential, and one theoretical alternative based on inertia, and the prospects of experimentally differentiating these are analyzed. Whether the method overturns the conventional wisdom that GR is the only metric theory of gravity and that alternatives must introduce additional interactions and fields is somewhat semantical, depending on whether one views the field strength assumption as a field and whether the assumption that produces GR is considered unique in some way. It is of course possible to have other fields, and the local space-time principle can be applied to field gravities which usually are weak-field approximations having only time dilation, giving them the spatial factor and promoting them to full metric theories. Though usually pedagogical, some of them are interesting from a quantum gravity perspective. Cases are noted where mass measurement errors, or distributions of dark matter, can cause one
Danilǎ, Bogdan; Harko, Tiberiu; Lobo, Francisco S. N.; Mak, M. K.
2017-02-01
We consider the internal structure and the physical properties of specific classes of neutron, quark and Bose-Einstein condensate stars in the recently proposed hybrid metric-Palatini gravity theory, which is a combination of the metric and Palatini f (R ) formalisms. It turns out that the theory is very successful in accounting for the observed phenomenology, since it unifies local constraints at the Solar System level and the late-time cosmic acceleration, even if the scalar field is very light. In this paper, we derive the equilibrium equations for a spherically symmetric configuration (mass continuity and Tolman-Oppenheimer-Volkoff) in the framework of the scalar-tensor representation of the hybrid metric-Palatini theory, and we investigate their solutions numerically for different equations of state of neutron and quark matter, by adopting for the scalar field potential a Higgs-type form. It turns out that the scalar-tensor definition of the potential can be represented as an Clairaut differential equation, and provides an explicit form for f (R ) given by f (R )˜R +Λeff, where Λeff is an effective cosmological constant. Furthermore, stellar models, described by the stiff fluid, radiation-like, bag model and the Bose-Einstein condensate equations of state are explicitly constructed in both general relativity and hybrid metric-Palatini gravity, thus allowing an in-depth comparison between the predictions of these two gravitational theories. As a general result it turns out that for all the considered equations of state, hybrid gravity stars are more massive than their general relativistic counterparts. Furthermore, two classes of stellar models corresponding to two particular choices of the functional form of the scalar field (constant value, and logarithmic form, respectively) are also investigated. Interestingly enough, in the case of a constant scalar field the equation of state of the matter takes the form of the bag model equation of state describing
Product Realization | College of Engineering & Applied Science
Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee Product Realization Course Companies need time and talent to develop new product prototypes. Students need
Modelling and Forecasting Multivariate Realized Volatility
DEFF Research Database (Denmark)
Halbleib, Roxana; Voev, Valeri
2011-01-01
This paper proposes a methodology for dynamic modelling and forecasting of realized covariance matrices based on fractionally integrated processes. The approach allows for flexible dependence patterns and automatically guarantees positive definiteness of the forecast. We provide an empirical appl...
Researchers Realize Major Breakthrough in Understanding Endometriosis
... 16, 2014 Researchers Realize Major Breakthrough in Understanding Endometriosis For a disease that affects an estimated 6 ... 10% of women, surprisingly little is known about endometriosis — a disorder that causes uterine tissue to grow ...
Advanced reactors: the case for metric design
International Nuclear Information System (INIS)
Ruby, L.
1986-01-01
The author argues that DOE should insist that all design specifications for advanced reactors be in the International System of Units (SI) in accordance with the Metric Conversion Act of 1975. Despite a lack of leadership from the federal government, industry has had to move toward conversion in order to compete on world markets. The US is the only major country without a scheduled conversion program. SI avoids the disadvantages of ambiguous names, non-coherent units, multiple units for the same quantity, multiple definitions, as well as barriers to international exchange and marketing and problems in comparing safety and code parameters. With a first step by DOE, the Nuclear Regulatory Commission should add the same requirements to reactor licensing guidelines. 4 references
Metrics for Evaluation of Student Models
Pelanek, Radek
2015-01-01
Researchers use many different metrics for evaluation of performance of student models. The aim of this paper is to provide an overview of commonly used metrics, to discuss properties, advantages, and disadvantages of different metrics, to summarize current practice in educational data mining, and to provide guidance for evaluation of student…
Context-dependent ATC complexity metric
Mercado Velasco, G.A.; Borst, C.
2015-01-01
Several studies have investigated Air Traffic Control (ATC) complexity metrics in a search for a metric that could best capture workload. These studies have shown how daunting the search for a universal workload metric (one that could be applied in different contexts: sectors, traffic patterns,
Croitoru, Anca; Apreutesei, Gabriela; Mastorakis, Nikos E.
2017-09-01
The subject of this paper belongs to the theory of approximate metrics [23]. An approximate metric on X is a real application defined on X × X that satisfies only a part of the metric axioms. In a recent paper [23], we introduced a new type of approximate metric, named C-metric, that is an application which satisfies only two metric axioms: symmetry and triangular inequality. The remarkable fact in a C-metric space is that a topological structure induced by the C-metric can be defined. The innovative idea of this paper is that we obtain some convergence properties of a C-metric space in the absence of a metric. In this paper we investigate C-metric spaces. The paper is divided into four sections. Section 1 is for Introduction. In Section 2 we recall some concepts and preliminary results. In Section 3 we present some properties of C-metric spaces, such as convergence properties, a canonical decomposition and a C-fixed point theorem. Finally, in Section 4 some conclusions are highlighted.
Nonlinear realizations of W3 symmetry
International Nuclear Information System (INIS)
Ivanov, E.A.; Krivonos, S.O.
1991-01-01
We derive the Toda lattice realization of classical W 3 symmetry on two scalar fields in a purely geometric way, proceeding from a nonlinear realization of some associate higher-spin symmetry W 3 ∞ is derived. The Toda lattice equations are interpreted as the constraints singling out a two-dimensional fully geodesic subspace in the initial coset space of W 3 ∞ . This subspace is the quotient of SL(3,R) over its maximal parabolic subgroup. 20 refs
Learning, Realizability and Games in Classical Arithmetic
Aschieri, Federico
2010-12-01
In this dissertation we provide mathematical evidence that the concept of learning can be used to give a new and intuitive computational semantics of classical proofs in various fragments of Predicative Arithmetic. First, we extend Kreisel modified realizability to a classical fragment of first order Arithmetic, Heyting Arithmetic plus EM1 (Excluded middle axiom restricted to Sigma^0_1 formulas). We introduce a new realizability semantics we call "Interactive Learning-Based Realizability". Our realizers are self-correcting programs, which learn from their errors and evolve through time. Secondly, we extend the class of learning based realizers to a classical version PCFclass of PCF and, then, compare the resulting notion of realizability with Coquand game semantics and prove a full soundness and completeness result. In particular, we show there is a one-to-one correspondence between realizers and recursive winning strategies in the 1-Backtracking version of Tarski games. Third, we provide a complete and fully detailed constructive analysis of learning as it arises in learning based realizability for HA+EM1, Avigad's update procedures and epsilon substitution method for Peano Arithmetic PA. We present new constructive techniques to bound the length of learning processes and we apply them to reprove - by means of our theory - the classic result of Godel that provably total functions of PA can be represented in Godel's system T. Last, we give an axiomatization of the kind of learning that is needed to computationally interpret Predicative classical second order Arithmetic. Our work is an extension of Avigad's and generalizes the concept of update procedure to the transfinite case. Transfinite update procedures have to learn values of transfinite sequences of non computable functions in order to extract witnesses from classical proofs.
Realization of FRC interior and exterior furniture
Šonka, Š.; Frantová, M.; Štemberk, P.; Havrda, J.; Janouch, P.
2017-09-01
This article deals with the implementation of fibre reinforced concrete for interior and exterior furniture. The use of fibre reinforced concrete for non-traditional and small structures brings some specifics in design and realization. These are, in particular, the design of a suitable mixture, the choice of the shape of the structure in relation to the technological possibilities of realization, the static effects and finally the actual production of the element.
The linguistic realization of information packaging
Vallduví, Enric; Engdahl, Elisabet
1996-01-01
There is increasing awareness of the large degree of crosslinguistic diversity involved in the structural realization of information packaging (or information structure). Whereas English and many Germanic languages primarily exploit intonation for informational purposes, in other languages, like Catalan, syntax plays the primary role in the realization of information packaging and intonation is reduced to a secondary role. In yet another group of languages the primary structural correlate is ...
Effective use of metrics in an ALARA program
International Nuclear Information System (INIS)
Bates, B.B. Jr.
1996-01-01
ALARA radiological protection programs require metrics to meet their objectives. Sources of metrics include; external dosimetry; internal dosimetry; radiological occurrences from the occurrence reporting and processing system (ORPS); and radiological incident reports (RIR). The sources themselves contain an abundance of specific ''indicators''. To choose the site-specific indicators that will be tracked and trended requires careful review. This required the end users to expend valuable time and effort to locate the data they needed. To address this problem, a central metrics database has been developed so that customers can have all their questions addressed quickly and correctly. The database was developed in the beginning to answer some of the customer's most frequently asked questions. It is now also a tool to communicate the status of the radiation protection program to facility managers. Finally it also addresses requirements contained in the Rad Con manual and the 10CFR835 implementation guides. The database uses currently available, ''user friendly'', software and contains information from RIR's, ORPS, and external dosimetry records specific to ALARA performance indicators. The database is expandable to allow new metrics input. Specific reports have been developed to assist customers in their tracking and trending of ALARA metrics
A Three-Dimensional Receiver Operator Characteristic Surface Diagnostic Metric
Simon, Donald L.
2011-01-01
Receiver Operator Characteristic (ROC) curves are commonly applied as metrics for quantifying the performance of binary fault detection systems. An ROC curve provides a visual representation of a detection system s True Positive Rate versus False Positive Rate sensitivity as the detection threshold is varied. The area under the curve provides a measure of fault detection performance independent of the applied detection threshold. While the standard ROC curve is well suited for quantifying binary fault detection performance, it is not suitable for quantifying the classification performance of multi-fault classification problems. Furthermore, it does not provide a measure of diagnostic latency. To address these shortcomings, a novel three-dimensional receiver operator characteristic (3D ROC) surface metric has been developed. This is done by generating and applying two separate curves: the standard ROC curve reflecting fault detection performance, and a second curve reflecting fault classification performance. A third dimension, diagnostic latency, is added giving rise to 3D ROC surfaces. Applying numerical integration techniques, the volumes under and between the surfaces are calculated to produce metrics of the diagnostic system s detection and classification performance. This paper will describe the 3D ROC surface metric in detail, and present an example of its application for quantifying the performance of aircraft engine gas path diagnostic methods. Metric limitations and potential enhancements are also discussed
Quasi-metrics, midpoints and applications
Energy Technology Data Exchange (ETDEWEB)
Valero, O.
2017-07-01
In applied sciences, the scientific community uses simultaneously different kinds of information coming from several sources in order to infer a conclusion or working decision. In the literature there are many techniques for merging the information and providing, hence, a meaningful fused data. In mostpractical cases such fusion methods are based on aggregation operators on somenumerical values, i.e. the aim of the fusion process is to obtain arepresentative number from a finite sequence of numerical data. In the aforementioned cases, the input data presents some kind of imprecision and for thisreason it is represented as fuzzy sets. Moreover, in such problems the comparisons between the numerical values that represent the information described by the fuzzy sets become necessary. The aforementioned comparisons are made by means of a distance defined on fuzzy sets. Thus, the numerical operators aggregating distances between fuzzy sets as incoming data play a central role in applied problems. Recently, J.J. Nieto and A. Torres gave some applications of the aggregation of distances on fuzzy sets to the study of real medical data in /cite{Nieto}. These applications are based on the notion of segment joining two given fuzzy sets and on the notion of set of midpoints between fuzzy sets. A few results obtained by Nieto and Torres have been generalized in turn by Casasnovas and Rossell/'{o} in /cite{Casas,Casas2}. Nowadays, quasi-metrics provide efficient tools in some fields of computer science and in bioinformatics. Motivated by the exposed facts, a study of segments joining two fuzzy sets and of midpoints between fuzzy sets when the measure, used for comparisons, is a quasi-metric has been made in /cite{Casas3, SebVal2013,TiradoValero}. (Author)
Stationary metrics and optical Zermelo-Randers-Finsler geometry
International Nuclear Information System (INIS)
Gibbons, G. W.; Warnick, C. M.; Herdeiro, C. A. R.; Werner, M. C.
2009-01-01
We consider a triality between the Zermelo navigation problem, the geodesic flow on a Finslerian geometry of Randers type, and spacetimes in one dimension higher admitting a timelike conformal Killing vector field. From the latter viewpoint, the data of the Zermelo problem are encoded in a (conformally) Painleve-Gullstrand form of the spacetime metric, whereas the data of the Randers problem are encoded in a stationary generalization of the usual optical metric. We discuss how the spacetime viewpoint gives a simple and physical perspective on various issues, including how Finsler geometries with constant flag curvature always map to conformally flat spacetimes and that the Finsler condition maps to either a causality condition or it breaks down at an ergo surface in the spacetime picture. The gauge equivalence in this network of relations is considered as well as the connection to analogue models and the viewpoint of magnetic flows. We provide a variety of examples.
DEFF Research Database (Denmark)
Gravesen, Jens
2015-01-01
and found the MacAdam ellipses which are often interpreted as defining the metric tensor at their centres. An important question is whether it is possible to define colour coordinates such that the Euclidean distance in these coordinates correspond to human perception. Using cubic splines to represent......The space of colours is a fascinating space. It is a real vector space, but no matter what inner product you put on the space the resulting Euclidean distance does not correspond to human perception of difference between colours. In 1942 MacAdam performed the first experiments on colour matching...
Product Operations Status Summary Metrics
Takagi, Atsuya; Toole, Nicholas
2010-01-01
The Product Operations Status Summary Metrics (POSSUM) computer program provides a readable view into the state of the Phoenix Operations Product Generation Subsystem (OPGS) data pipeline. POSSUM provides a user interface that can search the data store, collect product metadata, and display the results in an easily-readable layout. It was designed with flexibility in mind for support in future missions. Flexibility over various data store hierarchies is provided through the disk-searching facilities of Marsviewer. This is a proven program that has been in operational use since the first day of the Phoenix mission.
International Nuclear Information System (INIS)
Macedo, Alvaro; Torre Neto, Andre; Cruvinel, Paulo Estevao; Crestana, Silvio
1996-08-01
This paper describes the project , building and utilization of a tomograph of micro metric resolution in soil science. It describes the problems involved in soil's science study and it describes the system and methodology
Web metrics for library and information professionals
Stuart, David
2014-01-01
This is a practical guide to using web metrics to measure impact and demonstrate value. The web provides an opportunity to collect a host of different metrics, from those associated with social media accounts and websites to more traditional research outputs. This book is a clear guide for library and information professionals as to what web metrics are available and how to assess and use them to make informed decisions and demonstrate value. As individuals and organizations increasingly use the web in addition to traditional publishing avenues and formats, this book provides the tools to unlock web metrics and evaluate the impact of this content. The key topics covered include: bibliometrics, webometrics and web metrics; data collection tools; evaluating impact on the web; evaluating social media impact; investigating relationships between actors; exploring traditional publications in a new environment; web metrics and the web of data; the future of web metrics and the library and information professional.Th...
Design and realization of multithread CAMAC communication server software based on Winsock
International Nuclear Information System (INIS)
Zhang Xia
2002-01-01
The author describes the CAMAC communication server software which applies Winsock and multithread techniques. The design method of the whole software is given. The realization of network communication service and the synchronization problem of multithread are introduced in detail
Analysis of a turbulent buoyant confined jet modeled using realizable k-ε model
El-Amin, Mohamed; Sun, Shuyu; Heidemann, Wolfgang; Mü ller-Steinhagen, Hans M.
2010-01-01
Through this paper, analyses of components of the unheated/heated turbulent confined jet are introduced and some models to describe them are developed. Turbulence realizable k-ε model is used to model the turbulence of this problem. Numerical
The Finsler spacetime framework. Backgrounds for physics beyond metric geometry
Energy Technology Data Exchange (ETDEWEB)
Pfeifer, Christian
2013-11-15
The fundamental structure on which physics is described is the geometric spacetime background provided by a four dimensional manifold equipped with a Lorentzian metric. Most importantly the spacetime manifold does not only provide the stage for physical field theories but its geometry encodes causality, observers and their measurements and gravity simultaneously. This threefold role of the Lorentzian metric geometry of spacetime is one of the key insides of general relativity. During this thesis we extend the background geometry for physics from the metric framework of general relativity to our Finsler spacetime framework and ensure that the threefold role of the geometry of spacetime in physics is not changed. The geometry of Finsler spacetimes is determined by a function on the tangent bundle and includes metric geometry. In contrast to the standard formulation of Finsler geometry our Finsler spacetime framework overcomes the differentiability and existence problems of the geometric objects in earlier attempts to use Finsler geometry as an extension of Lorentzian metric geometry. The development of our nonmetric geometric framework which encodes causality is one central achievement of this thesis. On the basis of our well-defined Finsler spacetime geometry we are able to derive dynamics for the non-metric Finslerian geometry of spacetime from an action principle, obtained from the Einstein-Hilbert action, for the first time. We can complete the dynamics to a non-metric description of gravity by coupling matter fields, also formulated via an action principle, to the geometry of our Finsler spacetimes. We prove that the combined dynamics of the fields and the geometry are consistent with general relativity. Furthermore we demonstrate how to define observers and their measurements solely through the non-metric spacetime geometry. Physical consequence derived on the basis of our Finsler spacetime are: a possible solution to the fly-by anomaly in the solar system; the
The Finsler spacetime framework. Backgrounds for physics beyond metric geometry
International Nuclear Information System (INIS)
Pfeifer, Christian
2013-11-01
The fundamental structure on which physics is described is the geometric spacetime background provided by a four dimensional manifold equipped with a Lorentzian metric. Most importantly the spacetime manifold does not only provide the stage for physical field theories but its geometry encodes causality, observers and their measurements and gravity simultaneously. This threefold role of the Lorentzian metric geometry of spacetime is one of the key insides of general relativity. During this thesis we extend the background geometry for physics from the metric framework of general relativity to our Finsler spacetime framework and ensure that the threefold role of the geometry of spacetime in physics is not changed. The geometry of Finsler spacetimes is determined by a function on the tangent bundle and includes metric geometry. In contrast to the standard formulation of Finsler geometry our Finsler spacetime framework overcomes the differentiability and existence problems of the geometric objects in earlier attempts to use Finsler geometry as an extension of Lorentzian metric geometry. The development of our nonmetric geometric framework which encodes causality is one central achievement of this thesis. On the basis of our well-defined Finsler spacetime geometry we are able to derive dynamics for the non-metric Finslerian geometry of spacetime from an action principle, obtained from the Einstein-Hilbert action, for the first time. We can complete the dynamics to a non-metric description of gravity by coupling matter fields, also formulated via an action principle, to the geometry of our Finsler spacetimes. We prove that the combined dynamics of the fields and the geometry are consistent with general relativity. Furthermore we demonstrate how to define observers and their measurements solely through the non-metric spacetime geometry. Physical consequence derived on the basis of our Finsler spacetime are: a possible solution to the fly-by anomaly in the solar system; the
Metrics for building performance assurance
Energy Technology Data Exchange (ETDEWEB)
Koles, G.; Hitchcock, R.; Sherman, M.
1996-07-01
This report documents part of the work performed in phase I of a Laboratory Directors Research and Development (LDRD) funded project entitled Building Performance Assurances (BPA). The focus of the BPA effort is to transform the way buildings are built and operated in order to improve building performance by facilitating or providing tools, infrastructure, and information. The efforts described herein focus on the development of metrics with which to evaluate building performance and for which information and optimization tools need to be developed. The classes of building performance metrics reviewed are (1) Building Services (2) First Costs, (3) Operating Costs, (4) Maintenance Costs, and (5) Energy and Environmental Factors. The first category defines the direct benefits associated with buildings; the next three are different kinds of costs associated with providing those benefits; the last category includes concerns that are broader than direct costs and benefits to the building owner and building occupants. The level of detail of the various issues reflect the current state of knowledge in those scientific areas and the ability of the to determine that state of knowledge, rather than directly reflecting the importance of these issues; it intentionally does not specifically focus on energy issues. The report describes work in progress and is intended as a resource and can be used to indicate the areas needing more investigation. Other reports on BPA activities are also available.
Contribution to study and realization of 20-Tesla superconducting magnet
International Nuclear Information System (INIS)
Marty, J.
1981-11-01
This work is mainly concerned with 20 Tesla induction production study. This magnetic induction should be produced by associating a series of coils using high critical field commercial: superconductors to the 10 Tesla magnet (diameter: 300; let's call it 10-300 magnet). The operation temperature lowering from 4,2 0 K to 1,8 0 K should effectively lead to much higher inductions (with equal effective diameter) than the greatest performances nowadays realized at 4,2 0 K temperature. To this performance augmentation is associated a more important energy density augmentation. This leads to the necessity of the knowledge of the superconducting material physical properties. They are studied in this report. Following, different methodes of magnet calculations are described: problems related to mechanical constraints, protection and stability must be known. Finally, some coils of the 10-300 magnet are presented together with their realization [fr
[From planning to realization of an electronic patient record].
Krämer, T; Rapp, R; Krämer, K L
1999-03-01
The high complex requirements on information and information flow in todays hospitals can only be accomplished by the use of modern Information Systems (IS). In order to achieve this, the Stiftung Orthopädische Universitätsklinik has carried out first the Project "Strategic Informations System Planning" in 1993. Then realizing the necessary infrastructure (network; client-server) from 1993 to 1997, and finally started the introduction of modern IS (SAP R/3 and IXOS-Archive) in the clinical area. One of the approved goal was the replacement of the paper medical record by an up-to-date electronical medical record. In this article the following three topics will be discussed: the difference between the up-to-date electronical medical record and the electronically archived finished cases, steps performed by our clinic to realize the up-to-date electronical medical record and the problems occurred during this process.
Technology for NPP decantate treatment realized at Kola NPP
International Nuclear Information System (INIS)
Stakhiv, Michael; Avezniyazov, Slava; Savkin, Alexander; Fedorov, Denis; Dmitriev, Sergei; Kornev, Vladimir
2007-01-01
At Moscow SIA 'Radon' jointly with JSC 'Alliance Gamma', the technology for NPP Decantate Treatment was developed, tested and realized at Kola NPP. This technology consists of dissolving the salt residue and subsequent treatment by ozonization, separation of the deposits formed from ozonization and selective cleaning by ferro-cyanide sorbents. The nonactive salt solution goes to an industrial waste disposal site or a repository specially developed at NPP sites for 'exempt waste' products by IAEA classification. This technology was realized at Kola NPP in December 2006 year. At this time more than 1000 m 3 of decantates log time stored are treated. It allows solving very old problem to empty decantates' tanks at NPPs in environmentally safe manner and with high volume reduction factor. (authors)
Inverse Higgs effect in nonlinear realizations
International Nuclear Information System (INIS)
Ivanov, E.A.; Ogievetskij, V.I.
1975-01-01
In theories with nonlinearly realized symmetry it is possible in a number of cases to eliminate some initial Goldstone and gauge fields by means of putting appropriate Cartan forms equal to zero. This is called the inverse Higgs phenomenon. We give a general treatment of the inverse Higgs phenomenon for gauge and space-time symmetries and consider four instructive examples which are the elimination of unessential gauge fields in chiral symmetry and in non-linearly realized supersymmetry and also the elimination of unessential Goldstone fields in the spontaneously broken conformal and projective symmetries
Geometric approach to evolution problems in metric spaces
Stojković, Igor
2011-01-01
This PhD thesis contains four chapters where research material is presented. In the second chapter the extension of the product formulas for semigroups induced by convex functionals, from the classical Hilbert space setting to the setting of general CAT(0) spaces. In the third chapter, the
Assessment of the Log-Euclidean Metric Performance in Diffusion Tensor Image Segmentation
Directory of Open Access Journals (Sweden)
Mostafa Charmi
2010-06-01
Full Text Available Introduction: Appropriate definition of the distance measure between diffusion tensors has a deep impact on Diffusion Tensor Image (DTI segmentation results. The geodesic metric is the best distance measure since it yields high-quality segmentation results. However, the important problem with the geodesic metric is a high computational cost of the algorithms based on it. The main goal of this paper is to assess the possible substitution of the geodesic metric with the Log-Euclidean one to reduce the computational cost of a statistical surface evolution algorithm. Materials and Methods: We incorporated the Log-Euclidean metric in the statistical surface evolution algorithm framework. To achieve this goal, the statistics and gradients of diffusion tensor images were defined using the Log-Euclidean metric. Numerical implementation of the segmentation algorithm was performed in the MATLAB software using the finite difference techniques. Results: In the statistical surface evolution framework, the Log-Euclidean metric was able to discriminate the torus and helix patterns in synthesis datasets and rat spinal cords in biological phantom datasets from the background better than the Euclidean and J-divergence metrics. In addition, similar results were obtained with the geodesic metric. However, the main advantage of the Log-Euclidean metric over the geodesic metric was the dramatic reduction of computational cost of the segmentation algorithm, at least by 70 times. Discussion and Conclusion: The qualitative and quantitative results have shown that the Log-Euclidean metric is a good substitute for the geodesic metric when using a statistical surface evolution algorithm in DTIs segmentation.
Non-linear realizations and bosonic branes
International Nuclear Information System (INIS)
West, P.
2001-01-01
In this very short note, following hep-th/0001216, we express the well known bosonic brane as a non-linear realization. The reader may also consult hep-th/9912226, 0001216 and 0005270 where the branes of M theory are constructed as a non-linear realisation. The automorphisms of the supersymmetry algebra play an essential role. (author)
Nonlinear realization of general covariance group
International Nuclear Information System (INIS)
Hamamoto, Shinji
1979-01-01
The structure of the theory resulting from the nonlinear realization of general covariance group is analysed. We discuss the general form of free Lagrangian for Goldstone fields, and propose as a special choice one reasonable form which is shown to describe a gravitational theory with massless tensor graviton and massive vector tordion. (author)
The economic value of realized volatility
DEFF Research Database (Denmark)
Christoffersen, Peter; Feunou, Bruno; Jacobs, Kris
2014-01-01
Many studies have documented that daily realized volatility estimates based on intraday returns provide volatility forecasts that are superior to forecasts constructed from daily returns only. We investigate whether these forecasting improvements translate into economic value added. To do so, we ...
Banach spaces that realize minimal fillings
International Nuclear Information System (INIS)
Bednov, B. B.; Borodin, P. A.
2014-01-01
It is proved that a real Banach space realizes minimal fillings for all its finite subsets (a shortest network spanning a fixed finite subset always exists and has the minimum possible length) if and only if it is a predual of L 1 . The spaces L 1 are characterized in terms of Steiner points (medians). Bibliography: 25 titles. (paper)
Zero-intelligence realized variance estimation
Gatheral, J.; Oomen, R.C.A.
2010-01-01
Given a time series of intra-day tick-by-tick price data, how can realized variance be estimated? The obvious estimator—the sum of squared returns between trades—is biased by microstructure effects such as bid-ask bounce and so in the past, practitioners were advised to drop most of the data and
FPGA Realization of Memory 10 Viterbi Decoder
DEFF Research Database (Denmark)
Paaske, Erik; Bach, Thomas Bo; Andersen, Jakob Dahl
1997-01-01
sequence mode when feedback from the Reed-Solomon decoder is available. The Viterbi decoder is realized using two Altera FLEX 10K50 FPGA's. The overall operating speed is 30 kbit/s, and since up to three iterations are performed for each frame and only one decoder is used, the operating speed...
Evaluating realized genetic gains from tree improvement.
J.B. St. Clair
1993-01-01
Tree improvement has become an essential part of the management of forest lands for wood production, and predicting yields and realized gains from forests planted with genetically-improved trees will become increasingly important. This paper discusses concepts of tree improvement and genetic gain important to growth and yield modeling, and reviews previous studies of...
Metric approach to quantum constraints
International Nuclear Information System (INIS)
Brody, Dorje C; Hughston, Lane P; Gustavsson, Anna C T
2009-01-01
A framework for deriving equations of motion for constrained quantum systems is introduced and a procedure for its implementation is outlined. In special cases, the proposed new method, which takes advantage of the fact that the space of pure states in quantum mechanics has both a symplectic structure and a metric structure, reduces to a quantum analogue of the Dirac theory of constraints in classical mechanics. Explicit examples involving spin-1/2 particles are worked out in detail: in the first example, our approach coincides with a quantum version of the Dirac formalism, while the second example illustrates how a situation that cannot be treated by Dirac's approach can nevertheless be dealt with in the present scheme.
Metrics for Business Process Models
Mendling, Jan
Up until now, there has been little research on why people introduce errors in real-world business process models. In a more general context, Simon [404] points to the limitations of cognitive capabilities and concludes that humans act rationally only to a certain extent. Concerning modeling errors, this argument would imply that human modelers lose track of the interrelations of large and complex models due to their limited cognitive capabilities and introduce errors that they would not insert in a small model. A recent study by Mendling et al. [275] explores in how far certain complexity metrics of business process models have the potential to serve as error determinants. The authors conclude that complexity indeed appears to have an impact on error probability. Before we can test such a hypothesis in a more general setting, we have to establish an understanding of how we can define determinants that drive error probability and how we can measure them.
Existence of conformal metrics on spheres with prescribed Paneitz curvature
International Nuclear Information System (INIS)
Ben Ayed, Mohamed; El Mehdi, Khalil
2003-07-01
In this paper we study the problem of prescribing a fourth order conformal invariant (the Paneitz curvature) on the n-spheres, with n ≥ 5. Using tools from the theory of critical points at infinity, we provide some topological conditions on the level sets of a given function defined on the sphere, under which we prove the existence of conformal metric with prescribed Paneitz curvature. (author)
Hybrid Metric Propositional Neighborhood Logics with Interval Length Binders
DEFF Research Database (Denmark)
Della Monica, Dario; Goranko, Valentin; Sciavicco, Guido
2011-01-01
We investigate the question of how much hybrid machinery can be added to the interval neighbourhood logic PNL and its metric extension MPNL without losing the decidability of their satisfiability problem in N. In particular, we consider the natural hybrid extension of MPNL obtained by adding...... over interval lengths. These results show that MPNL itself is, in this sense, a maximal decidable (weakly) hybrid extension of PNL. © 2011 Elsevier B.V. All rights reserved....
Existence of conformal metrics on spheres with prescribed Paneitz curvature
Ben-Ayed, M
2003-01-01
In this paper we study the problem of prescribing a fourth order conformal invariant (the Paneitz curvature) on the n-spheres, with n >= 5. Using tools from the theory of critical points at infinity, we provide some topological conditions on the level sets of a given function defined on the sphere, under which we prove the existence of conformal metric with prescribed Paneitz curvature.
Active Metric Learning for Supervised Classification
Kumaran, Krishnan; Papageorgiou, Dimitri; Chang, Yutong; Li, Minhan; Takáč, Martin
2018-01-01
Clustering and classification critically rely on distance metrics that provide meaningful comparisons between data points. We present mixed-integer optimization approaches to find optimal distance metrics that generalize the Mahalanobis metric extensively studied in the literature. Additionally, we generalize and improve upon leading methods by removing reliance on pre-designated "target neighbors," "triplets," and "similarity pairs." Another salient feature of our method is its ability to en...
On Nakhleh's metric for reduced phylogenetic networks
Cardona, Gabriel; Llabrés, Mercè; Rosselló, Francesc; Valiente Feruglio, Gabriel Alejandro
2009-01-01
We prove that Nakhleh’s metric for reduced phylogenetic networks is also a metric on the classes of tree-child phylogenetic networks, semibinary tree-sibling time consistent phylogenetic networks, and multilabeled phylogenetic trees. We also prove that it separates distinguishable phylogenetic networks. In this way, it becomes the strongest dissimilarity measure for phylogenetic networks available so far. Furthermore, we propose a generalization of that metric that separates arbitrary phyl...
Generalized tolerance sensitivity and DEA metric sensitivity
Neralić, Luka; E. Wendell, Richard
2015-01-01
This paper considers the relationship between Tolerance sensitivity analysis in optimization and metric sensitivity analysis in Data Envelopment Analysis (DEA). Herein, we extend the results on the generalized Tolerance framework proposed by Wendell and Chen and show how this framework includes DEA metric sensitivity as a special case. Further, we note how recent results in Tolerance sensitivity suggest some possible extensions of the results in DEA metric sensitivity.
The definitive guide to IT service metrics
McWhirter, Kurt
2012-01-01
Used just as they are, the metrics in this book will bring many benefits to both the IT department and the business as a whole. Details of the attributes of each metric are given, enabling you to make the right choices for your business. You may prefer and are encouraged to design and create your own metrics to bring even more value to your business - this book will show you how to do this, too.
Generalized tolerance sensitivity and DEA metric sensitivity
Directory of Open Access Journals (Sweden)
Luka Neralić
2015-03-01
Full Text Available This paper considers the relationship between Tolerance sensitivity analysis in optimization and metric sensitivity analysis in Data Envelopment Analysis (DEA. Herein, we extend the results on the generalized Tolerance framework proposed by Wendell and Chen and show how this framework includes DEA metric sensitivity as a special case. Further, we note how recent results in Tolerance sensitivity suggest some possible extensions of the results in DEA metric sensitivity.
Common Metrics for Human-Robot Interaction
Steinfeld, Aaron; Lewis, Michael; Fong, Terrence; Scholtz, Jean; Schultz, Alan; Kaber, David; Goodrich, Michael
2006-01-01
This paper describes an effort to identify common metrics for task-oriented human-robot interaction (HRI). We begin by discussing the need for a toolkit of HRI metrics. We then describe the framework of our work and identify important biasing factors that must be taken into consideration. Finally, we present suggested common metrics for standardization and a case study. Preparation of a larger, more detailed toolkit is in progress.
Chaotic inflation with metric and matter perturbations
International Nuclear Information System (INIS)
Feldman, H.A.; Brandenberger, R.H.
1989-01-01
A perturbative scheme to analyze the evolution of both metric and scalar field perturbations in an expanding universe is developed. The scheme is applied to study chaotic inflation with initial metric and scalar field perturbations present. It is shown that initial gravitational perturbations with wavelength smaller than the Hubble radius rapidly decay. The metric simultaneously picks up small perturbations determined by the matter inhomogeneities. Both are frozen in once the wavelength exceeds the Hubble radius. (orig.)
Gravitational lensing in metric theories of gravity
International Nuclear Information System (INIS)
Sereno, Mauro
2003-01-01
Gravitational lensing in metric theories of gravity is discussed. I introduce a generalized approximate metric element, inclusive of both post-post-Newtonian contributions and a gravitomagnetic field. Following Fermat's principle and standard hypotheses, I derive the time delay function and deflection angle caused by an isolated mass distribution. Several astrophysical systems are considered. In most of the cases, the gravitomagnetic correction offers the best perspectives for an observational detection. Actual measurements distinguish only marginally different metric theories from each other
DEFF Research Database (Denmark)
Hansen, Peter Reinhard; Lunde, Asger; Voev, Valeri
We introduce a multivariate GARCH model that utilizes and models realized measures of volatility and covolatility. The realized measures extract information contained in high-frequency data that is particularly beneficial during periods with variation in volatility and covolatility. Applying the ...
About the possibility of a generalized metric
International Nuclear Information System (INIS)
Lukacs, B.; Ladik, J.
1991-10-01
The metric (the structure of the space-time) may be dependent on the properties of the object measuring it. The case of size dependence of the metric was examined. For this dependence the simplest possible form of the metric tensor has been constructed which fulfils the following requirements: there be two extremal characteristic scales; the metric be unique and the usual between them; the change be sudden in the neighbourhood of these scales; the size of the human body appear as a parameter (postulated on the basis of some philosophical arguments). Estimates have been made for the two extremal length scales according to existing observations. (author) 19 refs
Realized GARCH: A Complete Model of Returns and Realized Measures of Volatility
DEFF Research Database (Denmark)
Hansen, Peter Reinhard; Huang, Zhuo (Albert); Shek, Howard Howan
GARCH models have been successful in modeling financial returns. Still, much is to be gained by incorporating a realized measure of volatility in these models. In this paper we introduce a new framework for the joint modeling of returns and realized measures of volatility. The Realized GARCH...... framework nests most GARCH models as special cases and is, in many ways, a natural extension of standard GARCH models. We pay special attention to linear and log-linear Realized GARCH specifications. This class of models has several attractive features. It retains the simplicity and tractability...... to latent volatility. This equation facilitates a simple modeling of the dependence between returns and future volatility that is commonly referred to as the leverage effect. An empirical application with DJIA stocks and an exchange traded index fund shows that a simple Realized GARCH structure leads...
Realization of dynamic data migration and purge operations
International Nuclear Information System (INIS)
Wang Juan; Qiu Hongmao; Liu Junmin; Wang Xiaoming; Wang Hong; Zhong Bo; Lu Yuanlei; Xu Jin
2008-01-01
In the large scale real time data processing, with the time extend, the data in database system will be expanded, which declines the system capability. To solve the problem, this paper presents a method of migration and purge operations. New or updated database records within a specified time interval can be copied automatically from source database accounts to destination database accounts and the data in the source database will be deleted automatically after a specified period of time according to the rules using the method. The migration and purge operations have been realized in China National Data Center. (authors)
Deep Energy Retrofit Performance Metric Comparison: Eight California Case Studies
Energy Technology Data Exchange (ETDEWEB)
Walker, Iain [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fisher, Jeremy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Less, Brennan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
2014-06-01
In this paper we will present the results of monitored annual energy use data from eight residential Deep Energy Retrofit (DER) case studies using a variety of performance metrics. For each home, the details of the retrofits were analyzed, diagnostic tests to characterize the home were performed and the homes were monitored for total and individual end-use energy consumption for approximately one year. Annual performance in site and source energy, as well as carbon dioxide equivalent (CO_{2}e) emissions were determined on a per house, per person and per square foot basis to examine the sensitivity to these different metrics. All eight DERs showed consistent success in achieving substantial site energy and CO_{2}e reductions, but some projects achieved very little, if any source energy reduction. This problem emerged in those homes that switched from natural gas to electricity for heating and hot water, resulting in energy consumption dominated by electricity use. This demonstrates the crucial importance of selecting an appropriate metric to be used in guiding retrofit decisions. Also, due to the dynamic nature of DERs, with changes in occupancy, size, layout, and comfort, several performance metrics might be necessary to understand a project’s success.
A metric space for Type Ia supernova spectra: a new method to assess explosion scenarios
Sasdelli, Michele; Hillebrandt, W.; Kromer, M.; Ishida, E. E. O.; Röpke, F. K.; Sim, S. A.; Pakmor, R.; Seitenzahl, I. R.; Fink, M.
2017-04-01
Over the past years, Type Ia supernovae (SNe Ia) have become a major tool to determine the expansion history of the Universe, and considerable attention has been given to, both, observations and models of these events. However, until now, their progenitors are not known. The observed diversity of light curves and spectra seems to point at different progenitor channels and explosion mechanisms. Here, we present a new way to compare model predictions with observations in a systematic way. Our method is based on the construction of a metric space for SN Ia spectra by means of linear principal component analysis, taking care of missing and/or noisy data, and making use of partial least-squares regression to find correlations between spectral properties and photometric data. We investigate realizations of the three major classes of explosion models that are presently discussed: delayed-detonation Chandrasekhar-mass explosions, sub-Chandrasekhar-mass detonations and double-degenerate mergers, and compare them with data. We show that in the principal component space, all scenarios have observed counterparts, supporting the idea that different progenitors are likely. However, all classes of models face problems in reproducing the observed correlations between spectral properties and light curves and colours. Possible reasons are briefly discussed.
NIM Realization of the Gallium Triple Point
Xiaoke, Yan; Ping, Qiu; Yuning, Duan; Yongmei, Qu
2003-09-01
In the last three years (1999 to 2001), the gallium triple-point cell has been successfully developed, and much corresponding research has been carried out at the National Institute of Metrology (NIM), Beijing, China. This paper presents the cell design, apparatus and procedure for realizing the gallium triple point, and presents studies on the different freezing methods. The reproducibility is 0.03 mK, and the expanded uncertainty of realization of the gallium triple point is evaluated to be 0.17 mK (p=0.99, k=2.9). Also, the reproducibility of the gallium triple point was compared with that of the triple point of water.
Enablers & Barriers for Realizing Modularity Benefits
DEFF Research Database (Denmark)
Storbjerg, Simon Haahr; Brunø, Thomas Ditlev; Thyssen, Jesper
2012-01-01
far less attention compared to the theories and methods concerning modularization of technical systems. Harvesting the full potential of modularization, particularly in relation to product development agility, depends on more than an optimal architecture. Key enablers in this context......Although modularization is becoming both a well-described domain in academia and a broadly applied concept in business, many of today’s firm still struggle to realize the promised benefits of this approach. Managing modularization is a complex matter, and in spite of this, a topic that has received...... are the organizational and systems related aspects. Recognizing the need for guidance to realize the benefits of modularity, the purpose of this study is through a literature study and a case study to improve the insight into the organizational and systems related enablers and barriers with regard to obtaining the full...
Exploring heterogeneous market hypothesis using realized volatility
Chin, Wen Cheong; Isa, Zaidi; Mohd Nor, Abu Hassan Shaari
2013-04-01
This study investigates the heterogeneous market hypothesis using high frequency data. The cascaded heterogeneous trading activities with different time durations are modelled by the heterogeneous autoregressive framework. The empirical study indicated the presence of long memory behaviour and predictability elements in the financial time series which supported heterogeneous market hypothesis. Besides the common sum-of-square intraday realized volatility, we also advocated two power variation realized volatilities in forecast evaluation and risk measurement in order to overcome the possible abrupt jumps during the credit crisis. Finally, the empirical results are used in determining the market risk using the value-at-risk approach. The findings of this study have implications for informationally market efficiency analysis, portfolio strategies and risk managements.
Realization of superconductive films by screen printing
International Nuclear Information System (INIS)
Baudry, H.
1988-01-01
Screen printing is a promising method to manufacture superconductive lines making use of superconductive ceramics. An ink has been realized with YBa 2 Cu 3 0 7-x' and the process conditions defined by thermal analysis. A superconductive transition is observed after screen printing on MgO. The firing of the layer is made at 920 0 C followed by a reoxidation step at 420 0 C. The silver electrical contacts are also screen printed [fr
New techniques used to realize silicon photocells
International Nuclear Information System (INIS)
Siffert, P.
1978-01-01
The techniques used to realize the terrestrial silicon solar cells being considered the possible improvements of these methods are discussed. The various approaches under development to prepare silicon sheets in a continuous way are considered for both self-supporting or substrate deposited layers. Finally, the various methods used or under investigation to obtain the surface potential barrier are considered; MIS, heterojunction and ion implantation [fr
Experimental functional realization of attribute grammar system
Directory of Open Access Journals (Sweden)
I. Attali
2002-07-01
Full Text Available In this paper we present an experimental functional realization of attribute grammar(AG system for personal computers. For AG system functioning only Turbo Prolog compiler is required. The system functioning is based on a specially elaborated metalanguage for AG description, universal syntactic and semantic constructors. The AG system provides automatic generation of target compiler (syntax--oriented software using Turbo Prolog as object language.
Oil shale mines and their realizable production
International Nuclear Information System (INIS)
Habicht, K.
1994-01-01
The production of Estonian oil shale depends on its marketing opportunities. The realizable production is a function of the oil shale price, which in turn depends on production costs. The latter are dependent on which mines are producing oil shale and on the volume of production. The purpose of the present article is to analyze which mines should operate under various realizable production scenarios and what should be their annual output so that the total cost of oil shale production (including maintenance at idle mines) is minimized. This paper is also targeted at observing the change in the average production cost per ton of oil shale depending on the realizable output. The calculations are based on data for the first four months of 1993, as collected by N. Barabaner (Estonian Academy of Sciences, Institute of Economy). The data include the total production volume and production cost from the mines of RE 'Eesti Polevkivi' (State Enterprise 'Estonian Oil Shale'). They also project expenses from mine closings in case of conservation. The latter costs were allocated among mines in direct proportion to their respective number of employees. (author)
Coset realization of unifying W-algebras
International Nuclear Information System (INIS)
Blumenhagen, R.; Huebel, R.
1994-06-01
We construct several quantum coset W-algebras, e.g. sl(2,R)/U(1) and sl(2,R)+sl(2,R)/sl(2,R), and argue that they are finitely nonfreely generated. Furthermore, we discuss in detail their role as unifying W-algebras of Casimir W-algebras. We show that it is possible to give coset realizations of various types of unifying W-algebras, e.g. the diagonal cosets based on the symplectic Lie algebras sp(2n) realize the unifying W-algebras which have previously been introduced as 'WD -n '. In addition, minimal models of WD -n are studied. The coset realizations provide a generalization of level-rank-duality of dual coset pairs. As further examples of finitely nonfreely generated quantum W-algebras we discuss orbifolding of W-algebras which on the quantum level has different properties than in the classical case. We demonstrate in some examples that the classical limit according to Bowcock and Watts of these nonfreely finitely generated quantum W-algebras probably yields infinitely nonfreely generated classical W-algebras. (orig.)
Realization of logical functions by vector programs
Energy Technology Data Exchange (ETDEWEB)
Lapkin, L Ya
1983-03-01
Recent computing and control applications often require program realization of finite automata in general and of an important particular class of memoryless automata specified by systems of Boolean functions. Logical control and computing machines which receive sequences of discrete signals on the input and convert them into sequences of discrete output signals using finite memory may be described by a finite automation model. However, in distinction from the circuit interpretation of finite automata, the automaton algorithm represents the structure of the automaton program and not the structure of the machine itself. Therefore, the complexity of the computer realization of an automaton is the complexity of the computer program, and not the complexity of the hardware. Two classes of programs currently used to evalute boolean functions are operator programs and binary programs. However, computing machines, including microcomputers, are equipped with additional possibilities for evaluation of Boolean functions, which are not utilized in programs of these two basic classes. In this article, we consider the design of vector programs for program realization of systems of Boolean functions. 3 references.
Realization of chiral symmetry in the ERG
International Nuclear Information System (INIS)
Echigo, Yoshio; Igarashi, Yuji
2011-01-01
We discuss within the framework of the ERG how chiral symmetry is realized in a linear σ model. A generalized Ginsparg-Wilson relation is obtained from the Ward-Takahashi identities for the Wilson action assumed to be bilinear in the Dirac fields. We construct a family of its non-perturbative solutions. The family generates the most general solutions to the Ward-Takahashi identities. Some special solutions are discussed. For each solution in this family, chiral symmetry is realized in such a way that a change in the Wilson action under non-linear symmetry transformation is canceled with a change in the functional measure. We discuss that the family of solutions reduces via a field redefinition to a family of the Wilson actions with some composite object of the scalar fields which has a simple transformation property. For this family, chiral symmetry is linearly realized with a continuum analog of the operator extension of γ 5 used on the lattice. We also show that there exist some appropriate Dirac fields which obey the standard chiral transformations with γ 5 in contrast to the lattice case. Their Yukawa interaction with scalars, however, becomes non-linear. (author)
Enhancing Authentication Models Characteristic Metrics via ...
African Journals Online (AJOL)
In this work, we derive the universal characteristic metrics set for authentication models based on security, usability and design issues. We then compute the probability of the occurrence of each characteristic metrics in some single factor and multifactor authentication models in order to determine the effectiveness of these ...
Gravitational Metric Tensor Exterior to Rotating Homogeneous ...
African Journals Online (AJOL)
The covariant and contravariant metric tensors exterior to a homogeneous spherical body rotating uniformly about a common φ axis with constant angular velocity ω is constructed. The constructed metric tensors in this gravitational field have seven non-zero distinct components.The Lagrangian for this gravitational field is ...
Invariant metric for nonlinear symplectic maps
Indian Academy of Sciences (India)
In this paper, we construct an invariant metric in the space of homogeneous polynomials of a given degree (≥ 3). The homogeneous polynomials specify a nonlinear symplectic map which in turn represents a Hamiltonian system. By minimizing the norm constructed out of this metric as a function of system parameters, we ...
Metric solution of a spinning mass
International Nuclear Information System (INIS)
Sato, H.
1982-01-01
Studies on a particular class of asymptotically flat and stationary metric solutions called the Kerr-Tomimatsu-Sato class are reviewed about its derivation and properties. For a further study, an almost complete list of the papers worked on the Tomimatsu-Sato metrics is given. (Auth.)
On Information Metrics for Spatial Coding.
Souza, Bryan C; Pavão, Rodrigo; Belchior, Hindiael; Tort, Adriano B L
2018-04-01
The hippocampal formation is involved in navigation, and its neuronal activity exhibits a variety of spatial correlates (e.g., place cells, grid cells). The quantification of the information encoded by spikes has been standard procedure to identify which cells have spatial correlates. For place cells, most of the established metrics derive from Shannon's mutual information (Shannon, 1948), and convey information rate in bits/s or bits/spike (Skaggs et al., 1993, 1996). Despite their widespread use, the performance of these metrics in relation to the original mutual information metric has never been investigated. In this work, using simulated and real data, we find that the current information metrics correlate less with the accuracy of spatial decoding than the original mutual information metric. We also find that the top informative cells may differ among metrics, and show a surrogate-based normalization that yields comparable spatial information estimates. Since different information metrics may identify different neuronal populations, we discuss current and alternative definitions of spatially informative cells, which affect the metric choice. Copyright © 2018 IBRO. Published by Elsevier Ltd. All rights reserved.
Validation of Metrics for Collaborative Systems
Directory of Open Access Journals (Sweden)
Ion IVAN
2008-01-01
Full Text Available This paper describe the new concepts of collaborative systems metrics validation. The paper define the quality characteristics of collaborative systems. There are proposed a metric to estimate the quality level of collaborative systems. There are performed measurements of collaborative systems quality using a specially designed software.
Validation of Metrics for Collaborative Systems
Ion IVAN; Cristian CIUREA
2008-01-01
This paper describe the new concepts of collaborative systems metrics validation. The paper define the quality characteristics of collaborative systems. There are proposed a metric to estimate the quality level of collaborative systems. There are performed measurements of collaborative systems quality using a specially designed software.
Software Power Metric Model: An Implementation | Akwukwuma ...
African Journals Online (AJOL)
... and the execution time (TIME) in each case was recorded. We then obtain the application functions point count. Our result shows that the proposed metric is computable, consistent in its use of unit, and is programming language independent. Keywords: Software attributes, Software power, measurement, Software metric, ...
A composite efficiency metrics for evaluation of resource and energy utilization
International Nuclear Information System (INIS)
Yang, Siyu; Yang, Qingchun; Qian, Yu
2013-01-01
Polygeneration systems are commonly found in chemical and energy industry. These systems often involve chemical conversions and energy conversions. Studies of these systems are interdisciplinary, mainly involving fields of chemical engineering, energy engineering, environmental science, and economics. Each of these fields has developed an isolated index system different from the others. Analyses of polygeneration systems are therefore very likely to provide bias results with only the indexes from one field. This paper is motivated from this problem to develop a new composite efficiency metrics for polygeneration systems. This new metrics is based on the second law of thermodynamics, exergy theory. We introduce exergy cost for waste treatment as the energy penalty into conventional exergy efficiency. Using this new metrics could avoid the situation of spending too much energy for increasing production or paying production capacity for saving energy consumption. The composite metrics is studied on a simplified co-production process, syngas to methanol and electricity. The advantage of the new efficiency metrics is manifested by comparison with carbon element efficiency, energy efficiency, and exergy efficiency. Results show that the new metrics could give more rational analysis than the other indexes. - Highlights: • The composite efficiency metric gives the balanced evaluation of resource utilization and energy utilization. • This efficiency uses the exergy for waste treatment as the energy penalty. • This efficiency is applied on a simplified co-production process. • Results show that the composite metrics is better than energy efficiencies and resource efficiencies
The metrics of science and technology
Geisler, Eliezer
2000-01-01
Dr. Geisler's far-reaching, unique book provides an encyclopedic compilation of the key metrics to measure and evaluate the impact of science and technology on academia, industry, and government. Focusing on such items as economic measures, patents, peer review, and other criteria, and supported by an extensive review of the literature, Dr. Geisler gives a thorough analysis of the strengths and weaknesses inherent in metric design, and in the use of the specific metrics he cites. His book has already received prepublication attention, and will prove especially valuable for academics in technology management, engineering, and science policy; industrial R&D executives and policymakers; government science and technology policymakers; and scientists and managers in government research and technology institutions. Geisler maintains that the application of metrics to evaluate science and technology at all levels illustrates the variety of tools we currently possess. Each metric has its own unique strengths and...
Smart Grid Status and Metrics Report Appendices
Energy Technology Data Exchange (ETDEWEB)
Balducci, Patrick J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Antonopoulos, Chrissi A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Clements, Samuel L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gorrissen, Willy J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kirkham, Harold [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ruiz, Kathleen A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smith, David L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Weimar, Mark R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gardner, Chris [APQC, Houston, TX (United States); Varney, Jeff [APQC, Houston, TX (United States)
2014-07-01
A smart grid uses digital power control and communication technology to improve the reliability, security, flexibility, and efficiency of the electric system, from large generation through the delivery systems to electricity consumers and a growing number of distributed generation and storage resources. To convey progress made in achieving the vision of a smart grid, this report uses a set of six characteristics derived from the National Energy Technology Laboratory Modern Grid Strategy. The Smart Grid Status and Metrics Report defines and examines 21 metrics that collectively provide insight into the grid’s capacity to embody these characteristics. This appendix presents papers covering each of the 21 metrics identified in Section 2.1 of the Smart Grid Status and Metrics Report. These metric papers were prepared in advance of the main body of the report and collectively form its informational backbone.
Metrics for Polyphonic Sound Event Detection
Directory of Open Access Journals (Sweden)
Annamaria Mesaros
2016-05-01
Full Text Available This paper presents and discusses various metrics proposed for evaluation of polyphonic sound event detection systems used in realistic situations where there are typically multiple sound sources active simultaneously. The system output in this case contains overlapping events, marked as multiple sounds detected as being active at the same time. The polyphonic system output requires a suitable procedure for evaluation against a reference. Metrics from neighboring fields such as speech recognition and speaker diarization can be used, but they need to be partially redefined to deal with the overlapping events. We present a review of the most common metrics in the field and the way they are adapted and interpreted in the polyphonic case. We discuss segment-based and event-based definitions of each metric and explain the consequences of instance-based and class-based averaging using a case study. In parallel, we provide a toolbox containing implementations of presented metrics.
Czech Academy of Sciences Publication Activity Database
Čermák, M.; Haslinger, Jaroslav; Kozubek, T.; Sysala, Stanislav
2015-01-01
Roč. 95, č. 12 (2015), s. 1348-1371 ISSN 0044-2267 R&D Projects: GA ČR GA13-18652S Institutional support: RVO:68145535 Keywords : frictionless contact * alternating direction method of multipliers * limit load analysis * elastic-perfect analplasticity Subject RIV: BA - General Mathematics Impact factor: 1.293, year: 2015 http://onlinelibrary.wiley.com/doi/10.1002/zamm.201400069/epdf
The Erez–Rosen metric and the role of the quadrupole on light propagation
International Nuclear Information System (INIS)
Bini, Donato; Crosta, Mariateresa; Vecchiato, Alberto; De Felice, Fernando; Geralico, Andrea
2013-01-01
The gravitational field of a static body with the quadrupole moment is described by an exact solution found by Erez and Rosen. Here, we investigate the role of the quadrupole in the motion, deflection and lensing of a light ray in the above metric. The standard lensing observables such as image positions and magnification have been explicitly obtained in the weak-field and small-quadrupole limit. In this limit, the spacetime metric appears as the natural generalization to quadrupole corrections of the metric form adopted also in current astrometric models. Hence, the corresponding analytical solution of the inverse ray tracing problem and the consistency with other approaches are also discussed. (paper)
Scalar-flat Kaehler metrics with conformal Bianchi V symmetry
Energy Technology Data Exchange (ETDEWEB)
Dunajski, Maciej [Department of Applied Mathematics and Theoretical Physics, University of Cambridge, Wilberforce Road, Cambridge CB3 0WA (United Kingdom); Plansangkate, Prim, E-mail: M.Dunajski@damtp.cam.ac.uk, E-mail: plansang@CRM.UMontreal.ca [Centre de Recherches Mathematiques (CRM), Universite de Montreal, CP 6128, Montreal (Quebec) H3C 3J7 (Canada)
2011-06-21
We provide an affirmative answer to a question posed by Tod (1995, Twistor Theory (New York: Dekker)), and construct all four-dimensional Kaehler metrics with vanishing scalar curvature which are invariant under the conformal action of the Bianchi V group. The construction is based on the combination of twistor theory and the isomonodromic problem with two double poles. The resulting metrics are non-diagonal in the left-invariant basis and are explicitly given in terms of Bessel functions and their integrals. We also make a connection with the LeBrun ansatz, and characterize the associated solutions of the SU({infinity}) Toda equation by the existence a non-abelian two-dimensional group of point symmetries.
Generalized Friedmann-Robertson-Walker metric and redundancy in the generalized Einstein equations
International Nuclear Information System (INIS)
Kao, W.F.; Pen, U.
1991-01-01
A nontrivial redundancy relation, due to the differential structure of the gravitational Bianchi identity as well as the symmetry of the Friedmann-Robertson-Walker metric, in the gravitational field equation is clarified. A generalized Friedmann-Robertson-Walker metric is introduced in order to properly define a one-dimensional reduced problem which offers an alternative approach to obtain the gravitational field equations on Friedmann-Robertson-Walker spaces
Development and Implementation of a Design Metric for Systems Containing Long-Term Fluid Loops
Steele, John W.
2016-01-01
John Steele, a chemist and technical fellow from United Technologies Corporation, provided a water quality module to assist engineers and scientists with a metric tool to evaluate risks associated with the design of space systems with fluid loops. This design metric is a methodical, quantitative, lessons-learned based means to evaluate the robustness of a long-term fluid loop system design. The tool was developed by a cross-section of engineering disciplines who had decades of experience and problem resolution.
APM Best Practices Realizing Application Performance Management
Sydor, Michael J
2011-01-01
The objective of APM Best Practices: Realizing Application Performance Management is to establish reliable application performance management (APM) practices - to demonstrate value, to do it quickly, and to adapt to the client circumstances. It's important to balance long-term goals with short-term deliverables, but without compromising usefulness or correctness. The successful strategy is to establish a few reasonable goals, achieve them quickly, and then iterate over the same topics two more times, with each successive iteration expanding the skills and capabilities of the APM team. This str
Quantization of a nonlinearly realized supersymmetric theory
International Nuclear Information System (INIS)
Shima, K.
1977-01-01
The two-dimensional version of the Volkov-Akulov Lagrangian, where the supersymmetry is realized nonlinearly by means of a single Majorana spinor psi (x), is quantized. The equal-time anticommutators for the field are not c numbers but are functions of the field itself. By explicit calculation we shall show that the supersymmetry charges of the model form the supersymmetry algebra (the graded Lie algebra); therefore the Hamiltonian of the system P 0 is written as a bilinear sum of products of supersymmetry charges. We shall also show that the supersymmetry charges exactly generate a constant translation of psi (x) in the spinor space
Robustness Metrics: Consolidating the multiple approaches to quantify Robustness
DEFF Research Database (Denmark)
Göhler, Simon Moritz; Eifler, Tobias; Howard, Thomas J.
2016-01-01
robustness metrics; 3) Functional expectancy and dispersion robustness metrics; and 4) Probability of conformance robustness metrics. The goal was to give a comprehensive overview of robustness metrics and guidance to scholars and practitioners to understand the different types of robustness metrics...
Partial rectangular metric spaces and fixed point theorems.
Shukla, Satish
2014-01-01
The purpose of this paper is to introduce the concept of partial rectangular metric spaces as a generalization of rectangular metric and partial metric spaces. Some properties of partial rectangular metric spaces and some fixed point results for quasitype contraction in partial rectangular metric spaces are proved. Some examples are given to illustrate the observed results.
Measuring Information Security: Guidelines to Build Metrics
von Faber, Eberhard
Measuring information security is a genuine interest of security managers. With metrics they can develop their security organization's visibility and standing within the enterprise or public authority as a whole. Organizations using information technology need to use security metrics. Despite the clear demands and advantages, security metrics are often poorly developed or ineffective parameters are collected and analysed. This paper describes best practices for the development of security metrics. First attention is drawn to motivation showing both requirements and benefits. The main body of this paper lists things which need to be observed (characteristic of metrics), things which can be measured (how measurements can be conducted) and steps for the development and implementation of metrics (procedures and planning). Analysis and communication is also key when using security metrics. Examples are also given in order to develop a better understanding. The author wants to resume, continue and develop the discussion about a topic which is or increasingly will be a critical factor of success for any security managers in larger organizations.
Realization of fiber optic displacement sensors
Guzowski, Bartlomiej; Lakomski, Mateusz
2018-03-01
Fiber optic sensors are very promising because of their inherent advantages such as very small size, hard environment tolerance and impact of electromagnetic fields. In this paper three different types of Intensity Fiber Optic Displacement Sensors (I-FODS) are presented. Three configurations of I-FODS were realized in two varieties. In the first one, the cleaved multimode optical fibers (MMF) were used to collect reflected light, while in the second variety the MMF ended with ball lenses were chosen. To ensure an accurate alignment of optical fibers in the sensor head the MTP C9730 optical fiber ferrules were used. In this paper the influence of distribution of transmitting and detecting optical fibers on sensitivity and linear range of operation of developed I-FODS were investigated. We have shown, that I-FODS with ball lenses receive average 10.5% more reflected power in comparison to the cleaved optical fibers and they increase linearity range of I-FODS by 33%. In this paper, an analysis of each type of the realized sensor and detailed discussion are given.
Realization of quantum Fourier transform over ZN
International Nuclear Information System (INIS)
Fu Xiang-Qun; Bao Wan-Su; Li Fa-Da; Zhang Yu-Chao
2014-01-01
Since the difficulty in preparing the equal superposition state of amplitude is 1/√N, we construct a quantile transform of quantum Fourier transform (QFT) over Z N based on the elementary transforms, such as Hadamard transform and Pauli transform. The QFT over Z N can then be realized by the quantile transform, and used to further design its quantum circuit and analyze the requirements for the quantum register and quantum gates. However, the transform needs considerable quantum computational resources and it is difficult to construct a high-dimensional quantum register. Hence, we investigate the design of t-bit quantile transform, and introduce the definition of t-bit semiclassical QFT over Z N . According to probability amplitude, we prove that the transform can be used to realize QFT over Z N and further design its quantum circuit. For this transform, the requirements for the quantum register, the one-qubit gate, and two-qubit gate reduce obviously when compared with those for the QFT over Z N . (general)
Metrics Are Needed for Collaborative Software Development
Directory of Open Access Journals (Sweden)
Mojgan Mohtashami
2011-10-01
Full Text Available There is a need for metrics for inter-organizational collaborative software development projects, encompassing management and technical concerns. In particular, metrics are needed that are aimed at the collaborative aspect itself, such as readiness for collaboration, the quality and/or the costs and benefits of collaboration in a specific ongoing project. We suggest questions and directions for such metrics, spanning the full lifespan of a collaborative project, from considering the suitability of collaboration through evaluating ongoing projects to final evaluation of the collaboration.
Indefinite metric fields and the renormalization group
International Nuclear Information System (INIS)
Sherry, T.N.
1976-11-01
The renormalization group equations are derived for the Green functions of an indefinite metric field theory. In these equations one retains the mass dependence of the coefficient functions, since in the indefinite metric theories the masses cannot be neglected. The behavior of the effective coupling constant in the asymptotic and infrared limits is analyzed. The analysis is illustrated by means of a simple model incorporating indefinite metric fields. The model scales at first order, and at this order also the effective coupling constant has both ultra-violet and infra-red fixed points, the former being the bare coupling constant
Metric learning for DNA microarray data analysis
International Nuclear Information System (INIS)
Takeuchi, Ichiro; Nakagawa, Masao; Seto, Masao
2009-01-01
In many microarray studies, gene set selection is an important preliminary step for subsequent main task such as tumor classification, cancer subtype identification, etc. In this paper, we investigate the possibility of using metric learning as an alternative to gene set selection. We develop a simple metric learning algorithm aiming to use it for microarray data analysis. Exploiting a property of the algorithm, we introduce a novel approach for extending the metric learning to be adaptive. We apply the algorithm to previously studied microarray data on malignant lymphoma subtype identification.
Local adjacency metric dimension of sun graph and stacked book graph
Yulisda Badri, Alifiah; Darmaji
2018-03-01
A graph is a mathematical system consisting of a non-empty set of nodes and a set of empty sides. One of the topics to be studied in graph theory is the metric dimension. Application in the metric dimension is the navigation robot system on a path. Robot moves from one vertex to another vertex in the field by minimizing the errors that occur in translating the instructions (code) obtained from the vertices of that location. To move the robot must give different instructions (code). In order for the robot to move efficiently, the robot must be fast to translate the code of the nodes of the location it passes. so that the location vertex has a minimum distance. However, if the robot must move with the vertex location on a very large field, so the robot can not detect because the distance is too far.[6] In this case, the robot can determine its position by utilizing location vertices based on adjacency. The problem is to find the minimum cardinality of the required location vertex, and where to put, so that the robot can determine its location. The solution to this problem is the dimension of adjacency metric and adjacency metric bases. Rodrguez-Velzquez and Fernau combine the adjacency metric dimensions with local metric dimensions, thus becoming the local adjacency metric dimension. In the local adjacency metric dimension each vertex in the graph may have the same adjacency representation as the terms of the vertices. To obtain the local metric dimension of values in the graph of the Sun and the stacked book graph is used the construction method by considering the representation of each adjacent vertex of the graph.
Complexity metrics for workflow nets
Lassen, K.B.; Aalst, van der W.M.P.
2009-01-01
Process modeling languages such as EPCs, BPMN, flow charts, UML activity diagrams, Petri nets, etc., are used to model business processes and to configure process-aware information systems. It is known that users have problems understanding these diagrams. In fact, even process engineers and system
Complexity Metrics for Workflow Nets
DEFF Research Database (Denmark)
Lassen, Kristian Bisgaard; van der Aalst, Wil M.P.
2009-01-01
Process modeling languages such as EPCs, BPMN, flow charts, UML activity diagrams, Petri nets, etc.\\ are used to model business processes and to configure process-aware information systems. It is known that users have problems understanding these diagrams. In fact, even process engineers and system...
Boson realizations of Lie algebras with applications to nuclear physics
International Nuclear Information System (INIS)
Klein, A.; Marshalek, E.R.
1991-01-01
The concept of boson realization (or mapping) of Lie algebras appeared first in nuclear physics in 1962 as the idea of expanding bilinear forms in fermion creation and annihilation operators in Taylor series of boson operators, with the object of converting the study of nuclear vibrational motion into a problem of coupled oscillators. The physical situations of interest are quite diverse, depending, for instance, on whether excitations for fixed- or variable-particle number are being studied, on how total angular momentum is decomposed into orbital and spin parts, and on whether isotopic spin and other intrinsic degrees of freedom enter. As a consequence, all of the semisimple algebras other than the exceptional ones have proved to be of interest at one time or another, and all are studied in this review. Though the salient historical facts are presented in the introduction, in the body of the review the progression is (generally) from the simplest algebras to the more complex ones. With a sufficiently broad view of the physics requirements, the mathematical problem is the realization of an arbitrary representation of a Lie algebra in a subspace of a suitably chosen Hilbert space of bosons (Heisenberg-Weyl algebra). Indeed, if one includes the study of odd nuclei, one is forced to consider the mappings to spaces that are direct-product spaces of bosons and (quasi)fermions. Though all the methods that have been used for these problems are reviewed, emphasis is placed on a relatively new algebraic method that has emerged over the past decade. Many of the classic results are rederived, and some new results are obtained for odd systems
Metrics, Media and Advertisers: Discussing Relationship
Directory of Open Access Journals (Sweden)
Marco Aurelio de Souza Rodrigues
2014-11-01
Full Text Available This study investigates how Brazilian advertisers are adapting to new media and its attention metrics. In-depth interviews were conducted with advertisers in 2009 and 2011. In 2009, new media and its metrics were celebrated as innovations that would increase advertising campaigns overall efficiency. In 2011, this perception has changed: New media’s profusion of metrics, once seen as an advantage, started to compromise its ease of use and adoption. Among its findings, this study argues that there is an opportunity for media groups willing to shift from a product-focused strategy towards a customer-centric one, through the creation of new, simple and integrative metrics.
Networks and centroid metrics for understanding football
African Journals Online (AJOL)
Gonçalo Dias
games. However, it seems that the centroid metric, supported only by the position of players in the field ...... the strategy adopted by the coach (Gama et al., 2014). ... centroid distance as measures of team's tactical performance in youth football.
Clean Cities Annual Metrics Report 2009 (Revised)
Energy Technology Data Exchange (ETDEWEB)
Johnson, C.
2011-08-01
Document provides Clean Cities coalition metrics about the use of alternative fuels; the deployment of alternative fuel vehicles, hybrid electric vehicles (HEVs), and idle reduction initiatives; fuel economy activities; and programs to reduce vehicle miles driven.
Metric Guidelines Inservice and/or Preservice
Granito, Dolores
1978-01-01
Guidelines are given for designing teacher training for going metric. The guidelines were developed from existing guidelines, journal articles, a survey of colleges, and the detailed reactions of a panel. (MN)
Science and Technology Metrics and Other Thoughts
National Research Council Canada - National Science Library
Harman, Wayne; Staton, Robin
2006-01-01
This report explores the subject of science and technology metrics and other topics to begin to provide Navy managers, as well as scientists and engineers, additional tools and concepts with which to...
Using Activity Metrics for DEVS Simulation Profiling
Directory of Open Access Journals (Sweden)
Muzy A.
2014-01-01
Full Text Available Activity metrics can be used to profile DEVS models before and during the simulation. It is critical to get good activity metrics of models before and during their simulation. Having a means to compute a-priori activity of components (analytic activity may be worth when simulating a model (or parts of it for the first time. After, during the simulation, analytic activity can be corrected using dynamic one. In this paper, we introduce McCabe cyclomatic complexity metric (MCA to compute analytic activity. Both static and simulation activity metrics have been implemented through a plug-in of the DEVSimPy (DEVS Simulator in Python language environment and applied to DEVS models.
Evaluating and Estimating the WCET Criticality Metric
DEFF Research Database (Denmark)
Jordan, Alexander
2014-01-01
a programmer (or compiler) from targeting optimizations the right way. A possible resort is to use a metric that targets WCET and which can be efficiently computed for all code parts of a program. Similar to dynamic profiling techniques, which execute code with input that is typically expected...... for the application, based on WCET analysis we can indicate how critical a code fragment is, in relation to the worst-case bound. Computing such a metric on top of static analysis, incurs a certain overhead though, which increases with the complexity of the underlying WCET analysis. We present our approach...... to estimate the Criticality metric, by relaxing the precision of WCET analysis. Through this, we can reduce analysis time by orders of magnitude, while only introducing minor error. To evaluate our estimation approach and share our garnered experience using the metric, we evaluate real-time programs, which...
16 CFR 1511.8 - Metric references.
2010-01-01
... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Metric references. 1511.8 Section 1511.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS... parentheses for convenience and information only. ...
Flight Crew State Monitoring Metrics, Phase I
National Aeronautics and Space Administration — eSky will develop specific crew state metrics based on the timeliness, tempo and accuracy of pilot inputs required by the H-mode Flight Control System (HFCS)....
Low Parametric Sensitivity Realizations with relaxed L2-dynamic-range-scaling constraints
Hilaire , Thibault
2009-01-01
This paper presents a new dynamic-range scaling for the implementation of filters/controllers in state-space form. Relaxing the classical L2-scaling constraints by specific fixed-point considerations allows for a higher degree of freedom for the optimal L2-parametric sensitivity problem. However, overflows in the implementation are still prevented. The underlying constrained problem is converted into an unconstrained problem for which a solution can be provided. This leads to realizations whi...
Classroom reconstruction of the Schwarzschild metric
Kassner, Klaus
2015-01-01
A promising way to introduce general relativity in the classroom is to study the physical implications of certain given metrics, such as the Schwarzschild one. This involves lower mathematical expenditure than an approach focusing on differential geometry in its full glory and permits to emphasize physical aspects before attacking the field equations. Even so, in terms of motivation, lacking justification of the metric employed may pose an obstacle. The paper discusses how to establish the we...
Marketing communication metrics for social media
Töllinen, Aarne; Karjaluoto, Heikki
2011-01-01
The objective of this paper is to develop a conceptual framework for measuring the effectiveness of social media marketing communications. Specifically, we study whether the existing marketing communications performance metrics are still valid in the changing digitalised communications landscape, or whether it is time to rethink them, or even to devise entirely new metrics. Recent advances in information technology and marketing bring a need to re-examine measurement models. We combine two im...
Some observations on a fuzzy metric space
Energy Technology Data Exchange (ETDEWEB)
Gregori, V.
2017-07-01
Let $(X,d)$ be a metric space. In this paper we provide some observations about the fuzzy metric space in the sense of Kramosil and Michalek $(Y,N,/wedge)$, where $Y$ is the set of non-negative real numbers $[0,/infty[$ and $N(x,y,t)=1$ if $d(x,y)/leq t$ and $N(x,y,t)=0$ if $d(x,y)/geq t$. (Author)
Area Regge calculus and discontinuous metrics
International Nuclear Information System (INIS)
Wainwright, Chris; Williams, Ruth M
2004-01-01
Taking the triangle areas as independent variables in the theory of Regge calculus can lead to ambiguities in the edge lengths, which can be interpreted as discontinuities in the metric. We construct solutions to area Regge calculus using a triangulated lattice and find that on a spacelike or timelike hypersurface no such discontinuity can arise. On a null hypersurface however, we can have such a situation and the resulting metric can be interpreted as a so-called refractive wave
Design and Realization of Universal Data Interface
Directory of Open Access Journals (Sweden)
Jong-Woo Kim
2005-03-01
Full Text Available KARI studied data interface of Space Applications for developing Space Experimental Instrument in International Space Station, designed, and manufactured the UDIS (International Sapce Station Universal Data Interface simulator according to requirements of the data interface. This paper explains the design and implementation of UDIS for space application. UDIS is the instrument which simulate to interface the data from ISS to experiment module, payload and habitation module and use the development of a experiment system in the space. This simulator will be used to the GSE (Ground Support Equipment for test of experiment system. By realization of the simulator, we ensure data interface skills for a manned-space data communication system.
Effective Complexity of Stationary Process Realizations
Directory of Open Access Journals (Sweden)
Arleta Szkoła
2011-06-01
Full Text Available The concept of effective complexity of an object as the minimal description length of its regularities has been initiated by Gell-Mann and Lloyd. The regularities are modeled by means of ensembles, which is the probability distributions on finite binary strings. In our previous paper [1] we propose a definition of effective complexity in precise terms of algorithmic information theory. Here we investigate the effective complexity of binary strings generated by stationary, in general not computable, processes. We show that under not too strong conditions long typical process realizations are effectively simple. Our results become most transparent in the context of coarse effective complexity which is a modification of the original notion of effective complexity that needs less parameters in its definition. A similar modification of the related concept of sophistication has been suggested by Antunes and Fortnow.
Realized Variance and Market Microstructure Noise
DEFF Research Database (Denmark)
Hansen, Peter R.; Lunde, Asger
2006-01-01
We study market microstructure noise in high-frequency data and analyze its implications for the realized variance (RV) under a general specification for the noise. We show that kernel-based estimators can unearth important characteristics of market microstructure noise and that a simple kernel......-based estimator dominates the RV for the estimation of integrated variance (IV). An empirical analysis of the Dow Jones Industrial Average stocks reveals that market microstructure noise its time-dependent and correlated with increments in the efficient price. This has important implications for volatility...... estimation based on high-frequency data. Finally, we apply cointegration techniques to decompose transaction prices and bid-ask quotes into an estimate of the efficient price and noise. This framework enables us to study the dynamic effects on transaction prices and quotes caused by changes in the efficient...
Challenges in realizing ultraflat materials surfaces
Directory of Open Access Journals (Sweden)
Takashi Yatsui
2013-12-01
Full Text Available Ultraflat surface substrates are required to achieve an optimal performance of future optical, electronic, or optoelectronic devices for various applications, because such surfaces reduce the scattering loss of photons, electrons, or both at the surfaces and interfaces. In this paper, we review recent progress toward the realization of ultraflat materials surfaces. First, we review the development of surface-flattening techniques. Second, we briefly review the dressed photon–phonon (DPP, a nanometric quasiparticle that describes the coupled state of a photon, an electron, and a multimode-coherent phonon. Then, we review several recent developments based on DPP-photochemical etching and desorption processes, which have resulted in angstrom-scale flat surfaces. To confirm that the superior flatness of these surfaces that originated from the DPP process, we also review a simplified mathematical model that describes the scale-dependent effects of optical near-fields. Finally, we present the future outlook for these technologies.
Design and Realization of Intelligent Flow Controller
Directory of Open Access Journals (Sweden)
Jianxiong Ye
2014-09-01
Full Text Available According to accurate flow rate control requirements in large irrigation zone, a fuzzy controller with dead-band is designed on the characteristics analysis and comparison of PID and Fuzzy. The setting values of water flow for gates are determined by real-time water level detection sensors, and the realistic value of discharged water and gate opening are detected out with relative sensors, simulation manifest that the specific control strategy can adjust the gate swiftly in circumstance of huge offset, and regulate the gate slightly in time of small bias, it is realized with Siemens S315 PLC (Programmable Logical Controller and has being working steadily for 2 years, the aim of regulation is performed properly.
Realization of mechanical rotation in superfluid helium
Gordon, E. B.; Kulish, M. I.; Karabulin, A. V.; Matyushenko, V. I.; Dyatlova, E. V.; Gordienko, A. S.; Stepanov, M. E.
2017-09-01
The possibility of using miniaturized low-power electric motors submerged in superfluid helium for organization of rotation inside a cryostat has been investigated. It has been revealed that many of commercial micromotors can operate in liquid helium consuming low power. Turret with 5 sample holders, assembled on the base of stepper motor, has been successfully tested in experiments on the nanowire production in quantized vortices of superfluid helium. Application of the stepper motor made it possible in a single experiment to study the effect of various experimental parameters on the yield and quality of the nanowires. The promises for continuous fast rotation of the bath filled by superfluid helium by using high-speed brushless micromotor were outlined and tested. Being realized, this approach will open new possibility to study the guest particles interaction with the array of parallel linear vortices in He II.
Relaxed metrics and indistinguishability operators: the relationship
Energy Technology Data Exchange (ETDEWEB)
Martin, J.
2017-07-01
In 1982, the notion of indistinguishability operator was introduced by E. Trillas in order to fuzzify the crisp notion of equivalence relation (/cite{Trillas}). In the study of such a class of operators, an outstanding property must be pointed out. Concretely, there exists a duality relationship between indistinguishability operators and metrics. The aforesaid relationship was deeply studied by several authors that introduced a few techniques to generate metrics from indistinguishability operators and vice-versa (see, for instance, /cite{BaetsMesiar,BaetsMesiar2}). In the last years a new generalization of the metric notion has been introduced in the literature with the purpose of developing mathematical tools for quantitative models in Computer Science and Artificial Intelligence (/cite{BKMatthews,Ma}). The aforementioned generalized metrics are known as relaxed metrics. The main target of this talk is to present a study of the duality relationship between indistinguishability operators and relaxed metrics in such a way that the aforementioned classical techniques to generate both concepts, one from the other, can be extended to the new framework. (Author)
Realizing a new paradigm in radiation therapy treatment planning
International Nuclear Information System (INIS)
Ziegenhein, Peter
2013-01-01
This thesis investigates the feasibility of a new IMRT planning paradigm called Interactive Dose Shaping (IDS). The IDS paradigm enables the therapist to directly impose local dose features into the therapy plan. In contrast to the conventional IMRT planning approach, IDS does not employ an objective function to drive an iterative optimization procedure. In the first part of this work, the conventional IMRT plan optimization method is investigated. Concepts for a near-optimal implementation of the planning problem are provided. The second part of this work introduces the IDS concept. It is designed to overcome clinical drawbacks of the conventional method on the one hand and to provide interactive planning strategies which exploit the full potential of modern high-performance computer hardware on the other hand. The realization of the IDS concept consists of three main parts. (1)A two-step Dose Variation and Recovery (DVR) strategy which imposes localized plan features and recovers for unintentional plan modifications elsewhere. (2)A new dose calculation method (3)The design of an IDS planning framework which provides a powerful graphical user interface. It could be shown that the IDS paradigm is able to reproduce conventionally optimized therapy plans and that the IDS concepts can be realized in real-time.
Left-invariant Einstein metrics on S3 ×S3
Belgun, Florin; Cortés, Vicente; Haupt, Alexander S.; Lindemann, David
2018-06-01
The classification of homogeneous compact Einstein manifolds in dimension six is an open problem. We consider the remaining open case, namely left-invariant Einstein metrics g on G = SU(2) × SU(2) =S3 ×S3. Einstein metrics are critical points of the total scalar curvature functional for fixed volume. The scalar curvature S of a left-invariant metric g is constant and can be expressed as a rational function in the parameters determining the metric. The critical points of S, subject to the volume constraint, are given by the zero locus of a system of polynomials in the parameters. In general, however, the determination of the zero locus is apparently out of reach. Instead, we consider the case where the isotropy group K of g in the group of motions is non-trivial. When K ≇Z2 we prove that the Einstein metrics on G are given by (up to homothety) either the standard metric or the nearly Kähler metric, based on representation-theoretic arguments and computer algebra. For the remaining case K ≅Z2 we present partial results.
Mao, Shasha; Xiong, Lin; Jiao, Licheng; Feng, Tian; Yeung, Sai-Kit
2017-05-01
Riemannian optimization has been widely used to deal with the fixed low-rank matrix completion problem, and Riemannian metric is a crucial factor of obtaining the search direction in Riemannian optimization. This paper proposes a new Riemannian metric via simultaneously considering the Riemannian geometry structure and the scaling information, which is smoothly varying and invariant along the equivalence class. The proposed metric can make a tradeoff between the Riemannian geometry structure and the scaling information effectively. Essentially, it can be viewed as a generalization of some existing metrics. Based on the proposed Riemanian metric, we also design a Riemannian nonlinear conjugate gradient algorithm, which can efficiently solve the fixed low-rank matrix completion problem. By experimenting on the fixed low-rank matrix completion, collaborative filtering, and image and video recovery, it illustrates that the proposed method is superior to the state-of-the-art methods on the convergence efficiency and the numerical performance.
Baby universe metric equivalent to an interior black-hole metric
International Nuclear Information System (INIS)
Gonzalez-Diaz, P.F.
1991-01-01
It is shown that the maximally extended metric corresponding to a large wormhole is the unique possible wormhole metric whose baby universe sector is conformally equivalent ot the maximal inextendible Kruskal metric corresponding to the interior region of a Schwarzschild black hole whose gravitational radius is half the wormhole neck radius. The physical implications of this result in the black hole evaporation process are discussed. (orig.)
Realism in the Realized Popper's Experiment
Hunter, Geoffrey
2002-12-01
The realization of Karl Popper's EPR-like experiment by Shih and Kim (published 1999) produced the result that Popper hoped for: no ``action at a distance'' on one photon of an entangled pair when a measurement is made on the other photon. This experimental result is interpretable in local realistic terms: each photon has a definite position and transverse momentum most of the time; the position measurement on one photon (localization within a slit) disturbs the transverse momentum of that photon in a non-predictable way in accordance with the uncertainty principle; however, there is no effect on the other photon (the photon that is not in a slit) no action at a distance. The position measurement (localization within a slit) of the one photon destroys the coherence (entanglement) between the photons; i.e. decoherence occurs. This realistic (albeit retrodictive) interpretation of the Shih-Kim realization of what Popper called his ``crucial experiment'' is in accord with Bohr's original concept of the nature of the uncertainty principle, as being an inevitable effect of the disturbance of the measured system by the measuring apparatus. In this experiment the impact parameter of an incident photon with the centerline of the slit is an uncontrollable parameter of each individual photon scattering event; this impact parameter is variable for every incident photon, the variations being a statistical aspect of the beam of photons produced by the experimental arrangement. These experimental results are also in accord with the proposition of Einstein, Podolski and Rosen's 1935 paper: that quantum mechanics provides only a statistical, physically incomplete, theory of microscopic physical processes, for the quantum mechanical description of the experiment does not describe or explain the individual photon scattering events that are actually observed; the angle by which an individual photon is scattered is not predictable, because the photon's impact parameter with the
The dynamics of metric-affine gravity
International Nuclear Information System (INIS)
Vitagliano, Vincenzo; Sotiriou, Thomas P.; Liberati, Stefano
2011-01-01
Highlights: → The role and the dynamics of the connection in metric-affine theories is explored. → The most general second order action does not lead to a dynamical connection. → Including higher order invariants excites new degrees of freedom in the connection. → f(R) actions are also discussed and shown to be a non- representative class. - Abstract: Metric-affine theories of gravity provide an interesting alternative to general relativity: in such an approach, the metric and the affine (not necessarily symmetric) connection are independent quantities. Furthermore, the action should include covariant derivatives of the matter fields, with the covariant derivative naturally defined using the independent connection. As a result, in metric-affine theories a direct coupling involving matter and connection is also present. The role and the dynamics of the connection in such theories is explored. We employ power counting in order to construct the action and search for the minimal requirements it should satisfy for the connection to be dynamical. We find that for the most general action containing lower order invariants of the curvature and the torsion the independent connection does not carry any dynamics. It actually reduces to the role of an auxiliary field and can be completely eliminated algebraically in favour of the metric and the matter field, introducing extra interactions with respect to general relativity. However, we also show that including higher order terms in the action radically changes this picture and excites new degrees of freedom in the connection, making it (or parts of it) dynamical. Constructing actions that constitute exceptions to this rule requires significant fine tuned and/or extra a priori constraints on the connection. We also consider f(R) actions as a particular example in order to show that they constitute a distinct class of metric-affine theories with special properties, and as such they cannot be used as representative toy
The Realization of Focus in Asturian Spanish
Directory of Open Access Journals (Sweden)
Covadonga Sánchez-Alvarado
2018-01-01
Full Text Available Spanish was classified as a language that only exploits syntactic mechanisms to mark focus. Recent experimental studies, nonetheless, have shown that speakers of different dialects are also able to use prosody to different degrees. This study aims to provide further understanding on the role played by prosody in the realization of focus in Spanish by looking at Asturian Spanish, a dialect in contact with another Romance language, Asturian. The data from a contextualized sentence completion task revealed that a phonological distinction between specific pitch categories (L+
Spontaneously broken realization of supersymmetry in supergravity
International Nuclear Information System (INIS)
Ferrara, S.; Trieste Univ.
1979-01-01
It is shown that if supersymmetry is relevant for the physical world it must be broken either spontaneously or explicitly. Renormalizability and simplicity are in favor of a spontaneous realization of the symmetry breaking. When supersymmetry is spontaneously broken the spinorial analogue of the Goldstone phenomenon occurs, namely massless particles arise in the spectrum of the theory which carry the same quantum numbers of the broken generators Qsup(i) they are N spin 1/2 Goldstone fermions (goldstinos). These particles may be eaten by spin 3/2 gauge particles (gravitinos) when supersymmetry is gauged. It is shown that both the Higgs effect and super Higgs effect have taken place. 8 of the spin 1/2 particles have been eaten by the spin 3/2 particles and 24 of 70 scalars have been eaten by the spin 3/2 particles and 24 of 70 scalars have been eaten by 24 of the 28 vector particles to provide them with mass. The conclusion is that the number of mass relations is, in general, equal to r-1, where r is the rank of the algebra which generates the spectrum
Muglia, Victor O.
2010-01-01
The Problem: The purpose of this study was to investigate relationships between environmental turbulence, management support, organizational collaboration, information technology solution realization, and process performance in healthcare provider organizations. Method: A descriptive/correlational study of Hospital medical services process…
Evaluation metrics for biostatistical and epidemiological collaborations.
Rubio, Doris McGartland; Del Junco, Deborah J; Bhore, Rafia; Lindsell, Christopher J; Oster, Robert A; Wittkowski, Knut M; Welty, Leah J; Li, Yi-Ju; Demets, Dave
2011-10-15
Increasing demands for evidence-based medicine and for the translation of biomedical research into individual and public health benefit have been accompanied by the proliferation of special units that offer expertise in biostatistics, epidemiology, and research design (BERD) within academic health centers. Objective metrics that can be used to evaluate, track, and improve the performance of these BERD units are critical to their successful establishment and sustainable future. To develop a set of reliable but versatile metrics that can be adapted easily to different environments and evolving needs, we consulted with members of BERD units from the consortium of academic health centers funded by the Clinical and Translational Science Award Program of the National Institutes of Health. Through a systematic process of consensus building and document drafting, we formulated metrics that covered the three identified domains of BERD practices: the development and maintenance of collaborations with clinical and translational science investigators, the application of BERD-related methods to clinical and translational research, and the discovery of novel BERD-related methodologies. In this article, we describe the set of metrics and advocate their use for evaluating BERD practices. The routine application, comparison of findings across diverse BERD units, and ongoing refinement of the metrics will identify trends, facilitate meaningful changes, and ultimately enhance the contribution of BERD activities to biomedical research. Copyright © 2011 John Wiley & Sons, Ltd.
A Metric on Phylogenetic Tree Shapes.
Colijn, C; Plazzotta, G
2018-01-01
The shapes of evolutionary trees are influenced by the nature of the evolutionary process but comparisons of trees from different processes are hindered by the challenge of completely describing tree shape. We present a full characterization of the shapes of rooted branching trees in a form that lends itself to natural tree comparisons. We use this characterization to define a metric, in the sense of a true distance function, on tree shapes. The metric distinguishes trees from random models known to produce different tree shapes. It separates trees derived from tropical versus USA influenza A sequences, which reflect the differing epidemiology of tropical and seasonal flu. We describe several metrics based on the same core characterization, and illustrate how to extend the metric to incorporate trees' branch lengths or other features such as overall imbalance. Our approach allows us to construct addition and multiplication on trees, and to create a convex metric on tree shapes which formally allows computation of average tree shapes. © The Author(s) 2017. Published by Oxford University Press, on behalf of the Society of Systematic Biologists.
Future of the PCI Readmission Metric.
Wasfy, Jason H; Yeh, Robert W
2016-03-01
Between 2013 and 2014, the Centers for Medicare and Medicaid Services and the National Cardiovascular Data Registry publically reported risk-adjusted 30-day readmission rates after percutaneous coronary intervention (PCI) as a pilot project. A key strength of this public reporting effort included risk adjustment with clinical rather than administrative data. Furthermore, because readmission after PCI is common, expensive, and preventable, this metric has substantial potential to improve quality and value in American cardiology care. Despite this, concerns about the metric exist. For example, few PCI readmissions are caused by procedural complications, limiting the extent to which improved procedural technique can reduce readmissions. Also, similar to other readmission measures, PCI readmission is associated with socioeconomic status and race. Accordingly, the metric may unfairly penalize hospitals that care for underserved patients. Perhaps in the context of these limitations, Centers for Medicare and Medicaid Services has not yet included PCI readmission among metrics that determine Medicare financial penalties. Nevertheless, provider organizations may still wish to focus on this metric to improve value for cardiology patients. PCI readmission is associated with low-risk chest discomfort and patient anxiety. Therefore, patient education, improved triage mechanisms, and improved care coordination offer opportunities to minimize PCI readmissions. Because PCI readmission is common and costly, reducing PCI readmission offers provider organizations a compelling target to improve the quality of care, and also performance in contracts involve shared financial risk. © 2016 American Heart Association, Inc.
DEFF Research Database (Denmark)
Angella, Daniele; Calamai, Simone; Spotti, Cristiano
2017-01-01
We undertake the study of an analogue of the Yamabe problem for complex manifolds. More precisely, for any conformal Hermitian structure on a compact complex manifold, we are concerned in the existence of metrics with constant Chern scalar curvature. In this note, we set the problem and we provid...
g-Weak Contraction in Ordered Cone Rectangular Metric Spaces
Directory of Open Access Journals (Sweden)
S. K. Malhotra
2013-01-01
Full Text Available We prove some common fixed-point theorems for the ordered g-weak contractions in cone rectangular metric spaces without assuming the normality of cone. Our results generalize some recent results from cone metric and cone rectangular metric spaces into ordered cone rectangular metric spaces. Examples are provided which illustrate the results.
Defining a Progress Metric for CERT RMM Improvement
2017-09-14
REV-03.18.2016.0 Defining a Progress Metric for CERT-RMM Improvement Gregory Crabb Nader Mehravari David Tobar September 2017 TECHNICAL ...fendable resource allocation decisions. Technical metrics measure aspects of controls implemented through technology (systems, soft- ware, hardware...implementation metric would be the percentage of users who have received anti-phishing training . • Effectiveness/efficiency metrics measure whether
NASA education briefs for the classroom. Metrics in space
The use of metric measurement in space is summarized for classroom use. Advantages of the metric system over the English measurement system are described. Some common metric units are defined, as are special units for astronomical study. International system unit prefixes and a conversion table of metric/English units are presented. Questions and activities for the classroom are recommended.
Bootstrapping realized volatility and realized beta under a local Gaussianity assumption
DEFF Research Database (Denmark)
Hounyo, Ulrich
The main contribution of this paper is to propose a new bootstrap method for statistics based on high frequency returns. The new method exploits the local Gaussianity and the local constancy of volatility of high frequency returns, two assumptions that can simplify inference in the high frequency...... context, as recently explained by Mykland and Zhang (2009). Our main contributions are as follows. First, we show that the local Gaussian bootstrap is firstorder consistent when used to estimate the distributions of realized volatility and ealized betas. Second, we show that the local Gaussian bootstrap...... matches accurately the first four cumulants of realized volatility, implying that this method provides third-order refinements. This is in contrast with the wild bootstrap of Gonçalves and Meddahi (2009), which is only second-order correct. Third, we show that the local Gaussian bootstrap is able...
Preparation and realization of HPP Zilina
International Nuclear Information System (INIS)
Cizik, F.
1997-01-01
The results achieved in finishing of the preparation and in realization of the Hydro Power Project (HPP) Zilina proved advantageousness of such approach even if an increasing presence of eccentric competing interests should be mentioned. Integration of mutual interest within the established company limited by shares means to create equal conditions for all of the partners and not a power liquidation of specificities and not a power liquidation of specificities, specialties and individualities, both of value and legal ones. HPPs with power utilization must be built in such places in which there are suitable conditions for their operation created by the nature on a stream. Their power contribution is, as a rule, a contribution for the whole electric system. The part beneficial to the public is a contribution for the region affected by the construction. During the construction, they offer jobs not only, but especially, for the residents of the region affected by the construction but also for workers in cement works, brick works, steels works, and other kinds of industries providing supplies for the construction, industry of services. Changes in legislation supporting construction of HPPs with power utilization, purchasing system and electric energy prices remain still unsolved. Energy prices are distorted compared to relations in western in western market economies and do not allow either reproduction of a production base or gain and pay back the credits and compound interest. An additional idea of the state about financing the part of HPPs with power utilization beneficial to the public from resources gained in operation of the built objects without any form of easement of taxation and changes shifts a return of invested resources behind a border of an entrepreneurial interest
The Semantic Web: From Representation to Realization
Thórisson, Kristinn R.; Spivack, Nova; Wissner, James M.
A semantically-linked web of electronic information - the Semantic Web - promises numerous benefits including increased precision in automated information sorting, searching, organizing and summarizing. Realizing this requires significantly more reliable meta-information than is readily available today. It also requires a better way to represent information that supports unified management of diverse data and diverse Manipulation methods: from basic keywords to various types of artificial intelligence, to the highest level of intelligent manipulation - the human mind. How this is best done is far from obvious. Relying solely on hand-crafted annotation and ontologies, or solely on artificial intelligence techniques, seems less likely for success than a combination of the two. In this paper describe an integrated, complete solution to these challenges that has already been implemented and tested with hundreds of thousands of users. It is based on an ontological representational level we call SemCards that combines ontological rigour with flexible user interface constructs. SemCards are machine- and human-readable digital entities that allow non-experts to create and use semantic content, while empowering machines to better assist and participate in the process. SemCards enable users to easily create semantically-grounded data that in turn acts as examples for automation processes, creating a positive iterative feedback loop of metadata creation and refinement between user and machine. They provide a holistic solution to the Semantic Web, supporting powerful management of the full lifecycle of data, including its creation, retrieval, classification, sorting and sharing. We have implemented the SemCard technology on the semantic Web site Twine.com, showing that the technology is indeed versatile and scalable. Here we present the key ideas behind SemCards and describe the initial implementation of the technology.
SOCIAL METRICS APPLIED TO SMART TOURISM
Directory of Open Access Journals (Sweden)
O. Cervantes
2016-09-01
Full Text Available We present a strategy to make productive use of semantically-related social data, from a user-centered semantic network, in order to help users (tourists and citizens in general to discover cultural heritage, points of interest and available services in a smart city. This data can be used to personalize recommendations in a smart tourism application. Our approach is based on flow centrality metrics typically used in social network analysis: flow betweenness, flow closeness and eccentricity. These metrics are useful to discover relevant nodes within the network yielding nodes that can be interpreted as suggestions (venues or services to users. We describe the semantic network built on graph model, as well as social metrics algorithms used to produce recommendations. We also present challenges and results from a prototypical implementation applied to the case study of the City of Puebla, Mexico.
Landscape pattern metrics and regional assessment
O'Neill, R. V.; Riitters, K.H.; Wickham, J.D.; Jones, K.B.
1999-01-01
The combination of remote imagery data, geographic information systems software, and landscape ecology theory provides a unique basis for monitoring and assessing large-scale ecological systems. The unique feature of the work has been the need to develop and interpret quantitative measures of spatial pattern-the landscape indices. This article reviews what is known about the statistical properties of these pattern metrics and suggests some additional metrics based on island biogeography, percolation theory, hierarchy theory, and economic geography. Assessment applications of this approach have required interpreting the pattern metrics in terms of specific environmental endpoints, such as wildlife and water quality, and research into how to represent synergystic effects of many overlapping sources of stress.
A bi-metric theory of gravitation
International Nuclear Information System (INIS)
Rosen, N.
1975-01-01
The bi-metric theory of gravitation proposed previously is simplified in that the auxiliary conditions are discarded, the two metric tensors being tied together only by means of the boundary conditions. Some of the properties of the field of a particle are investigated; there is no black hole, and it appears that no gravitational collapse can take place. Although the proposed theory and general relativity are at present observationally indistinguishable, some differences are pointed out which may some day be susceptible of observation. An alternative bi-metric theory is considered which gives for the precession of the perihelion 5/6 of the value given by general relativity; it seems less satisfactory than the present theory from the aesthetic point of view. (author)
Metrical and dynamical aspects in complex analysis
2017-01-01
The central theme of this reference book is the metric geometry of complex analysis in several variables. Bridging a gap in the current literature, the text focuses on the fine behavior of the Kobayashi metric of complex manifolds and its relationships to dynamical systems, hyperbolicity in the sense of Gromov and operator theory, all very active areas of research. The modern points of view expressed in these notes, collected here for the first time, will be of interest to academics working in the fields of several complex variables and metric geometry. The different topics are treated coherently and include expository presentations of the relevant tools, techniques and objects, which will be particularly useful for graduate and PhD students specializing in the area.
Social Metrics Applied to Smart Tourism
Cervantes, O.; Gutiérrez, E.; Gutiérrez, F.; Sánchez, J. A.
2016-09-01
We present a strategy to make productive use of semantically-related social data, from a user-centered semantic network, in order to help users (tourists and citizens in general) to discover cultural heritage, points of interest and available services in a smart city. This data can be used to personalize recommendations in a smart tourism application. Our approach is based on flow centrality metrics typically used in social network analysis: flow betweenness, flow closeness and eccentricity. These metrics are useful to discover relevant nodes within the network yielding nodes that can be interpreted as suggestions (venues or services) to users. We describe the semantic network built on graph model, as well as social metrics algorithms used to produce recommendations. We also present challenges and results from a prototypical implementation applied to the case study of the City of Puebla, Mexico.
Validation of Metrics as Error Predictors
Mendling, Jan
In this chapter, we test the validity of metrics that were defined in the previous chapter for predicting errors in EPC business process models. In Section 5.1, we provide an overview of how the analysis data is generated. Section 5.2 describes the sample of EPCs from practice that we use for the analysis. Here we discuss a disaggregation by the EPC model group and by error as well as a correlation analysis between metrics and error. Based on this sample, we calculate a logistic regression model for predicting error probability with the metrics as input variables in Section 5.3. In Section 5.4, we then test the regression function for an independent sample of EPC models from textbooks as a cross-validation. Section 5.5 summarizes the findings.
Metric Learning for Hyperspectral Image Segmentation
Bue, Brian D.; Thompson, David R.; Gilmore, Martha S.; Castano, Rebecca
2011-01-01
We present a metric learning approach to improve the performance of unsupervised hyperspectral image segmentation. Unsupervised spatial segmentation can assist both user visualization and automatic recognition of surface features. Analysts can use spatially-continuous segments to decrease noise levels and/or localize feature boundaries. However, existing segmentation methods use tasks-agnostic measures of similarity. Here we learn task-specific similarity measures from training data, improving segment fidelity to classes of interest. Multiclass Linear Discriminate Analysis produces a linear transform that optimally separates a labeled set of training classes. The defines a distance metric that generalized to a new scenes, enabling graph-based segmentation that emphasizes key spectral features. We describe tests based on data from the Compact Reconnaissance Imaging Spectrometer (CRISM) in which learned metrics improve segment homogeneity with respect to mineralogical classes.
Kerr metric in the deSitter background
International Nuclear Information System (INIS)
Vaidya, P.C.
1984-01-01
In addition to the Kerr metric with cosmological constant Λ several other metrics are presented giving a Kerr-like solution of Einstein's equations in the background of deSitter universe. A new metric of what may be termed as rotating deSitter space-time devoid of matter but containing null fluid with twisting null rays, has been presented. This metric reduces to the standard deSitter metric when the twist in the rays vanishes. Kerr metric in this background is the immediate generalization of Schwarzschild's exterior metric with cosmological constant. (author)
Gkillas (Gillas), Konstantinos; Vortelinos, Dimitrios I.; Saha, Shrabani
2018-02-01
This paper investigates the properties of realized volatility and correlation series in the Indian stock market by employing daily data converting to monthly frequency of five different stock indices from January 2, 2006 to November 30, 2014. Using non-parametric estimation technique the properties examined include normality, long-memory, asymmetries, jumps, and heterogeneity. The realized volatility is a useful technique which provides a relatively accurate measure of volatility based on the actual variance which is beneficial for asset management in particular for non-speculative funds. The results show that realized volatility and correlation series are not normally distributed, with some evidence of persistence. Asymmetries are also evident in both volatilities and correlations. Both jumps and heterogeneity properties are significant; whereas, the former is more significant than the latter. The findings show that properties of volatilities and correlations in Indian stock market have similarities as that show in the stock markets in developed countries such as the stock market in the United States which is more prevalent for speculative business traders.
Active Metric Learning from Relative Comparisons
Xiong, Sicheng; Rosales, Rómer; Pei, Yuanli; Fern, Xiaoli Z.
2014-01-01
This work focuses on active learning of distance metrics from relative comparison information. A relative comparison specifies, for a data point triplet $(x_i,x_j,x_k)$, that instance $x_i$ is more similar to $x_j$ than to $x_k$. Such constraints, when available, have been shown to be useful toward defining appropriate distance metrics. In real-world applications, acquiring constraints often require considerable human effort. This motivates us to study how to select and query the most useful ...
Heuristic extension of the Schwarzschild metric
International Nuclear Information System (INIS)
Espinosa, J.M.
1982-01-01
The Schwarzschild solution of Einstein's equations of gravitation has several singularities. It is known that the singularity at r = 2Gm/c 2 is only apparent, a result of the coordinates in which the solution was found. Paradoxical results occuring near the singularity show the system of coordinates is incomplete. We introduce a simple, two-dimensional metric with an apparent singularity that makes it incomplete. By a straightforward, heuristic procedure we extend and complete this simple metric. We then use the same procedure to give a heuristic derivation of the Kruskal system of coordinates, which is known to extend the Schwarzschild manifold past its apparent singularity and produce a complete manifold
Metric inhomogeneous Diophantine approximation in positive characteristic
DEFF Research Database (Denmark)
Kristensen, Simon
2011-01-01
We obtain asymptotic formulae for the number of solutions to systems of inhomogeneous linear Diophantine inequalities over the field of formal Laurent series with coefficients from a finite fields, which are valid for almost every such system. Here `almost every' is with respect to Haar measure...... of the coefficients of the homogeneous part when the number of variables is at least two (singly metric case), and with respect to the Haar measure of all coefficients for any number of variables (doubly metric case). As consequences, we derive zero-one laws in the spirit of the Khintchine-Groshev Theorem and zero...
Metric inhomogeneous Diophantine approximation in positive characteristic
DEFF Research Database (Denmark)
Kristensen, S.
We obtain asymptotic formulae for the number of solutions to systems of inhomogeneous linear Diophantine inequalities over the field of formal Laurent series with coefficients from a finite fields, which are valid for almost every such system. Here 'almost every' is with respect to Haar measure...... of the coefficients of the homogeneous part when the number of variables is at least two (singly metric case), and with respect to the Haar measure of all coefficients for any number of variables (doubly metric case). As consequences, we derive zero-one laws in the spirit of the Khintchine--Groshev Theorem and zero...
Evaluation of methods used to determine realized energy savings
International Nuclear Information System (INIS)
Boonekamp, Piet G.M.
2006-01-01
Most methods to determine realized total energy savings at national or sectoral level make choices, or neglect problems, which hamper the calculation of sound and useful energy-saving figures. Issues are the choice of the right aggregation level, the appropriate variables to construct a reference energy consumption trend, the energy quantities to be applied and interaction between various effects. Uncertainty margins for results lack in most presentations as well. This paper presents six methods, illustrates the adverse effects of certain choices and problems, and investigates how these methods deal with them. The methods are scored with respect to the issues mentioned above. Finally, a number of improvements are suggested, among which the use of final energy demand expressed in primary energy units, and bottom-up analyses at the level of real saving options. The last option is the more important, as it could provide top-down evaluation results (total savings from decomposition) as well as bottom-up policy monitoring results, both being crucial to new European energy-saving policy
Financing--The Basis of Organization and Realization of the Investment Policy of Russian Enterprises
Charaeva, Marina V.; Naumova, Olga A.; Kosyakova, Inessa V.; Denisov, Aleksandr D.
2016-01-01
The relevance of the research: the relevance of research problem caused the necessity in organization investment policy of Russian enterprises for intensification of their strategic investment development and insufficient development of theoretical and methodological aspects in attracting financial resources for the realization of investment…
Planning and Realization of Complex Intentions in Traumatic Brain Injury and Normal Aging
Kliegel, Matthias; Eschen, Anne; Thone-Otto, Angelika I. T.
2004-01-01
The realization of delayed intentions (i.e., prospective memory) is a highly complex process composed of four phases: intention formation, retention, re-instantiation, and execution. The aim of this study was to investigate if executive functioning impairments are related to problems in the formation, re-instantiation, and execution of a delayed…
On realization of nonlinear systems described by higher-order differential equations
van der Schaft, Arjan
1987-01-01
We consider systems of smooth nonlinear differential and algebraic equations in which some of the variables are distinguished as “external variables.” The realization problem is to replace the higher-order implicit differential equations by first-order explicit differential equations and the
Forecasting Co-Volatilities via Factor Models with Asymmetry and Long Memory in Realized Covariance
M. Asai (Manabu); M.J. McAleer (Michael)
2014-01-01
markdownabstract__Abstract__ Modelling covariance structures is known to suffer from the curse of dimensionality. In order to avoid this problem for forecasting, the authors propose a new factor multivariate stochastic volatility (fMSV) model for realized covariance measures that accommodates
Realization of associative products in terms of Moyal and tomographic symbols
Ibort, A.; Man'ko, V. I.; Marmo, G.; Simoni, A.; Stornaiolo, C.; Ventriglia, F.
2013-01-01
The quantizer-dequantizer method allows to construct associative products on any measure space. Here we consider an inverse problem: given an associative product is it possible to realize it within the quantizer-dequantizer framework? The answer is positive in finite dimensions and we give a few examples in infinite dimensions.
Exponential GARCH Modeling with Realized Measures of Volatility
DEFF Research Database (Denmark)
Hansen, Peter Reinhard; Huang, Zhuo
returns and volatility. We apply the model to DJIA stocks and an exchange traded fund that tracks the S&P 500 index and find that specifications with multiple realized measures dominate those that rely on a single realized measure. The empirical analysis suggests some convenient simplifications......We introduce the Realized Exponential GARCH model that can utilize multiple realized volatility measures for the modeling of a return series. The model specifies the dynamic properties of both returns and realized measures, and is characterized by a flexible modeling of the dependence between...
US Rocket Propulsion Industrial Base Health Metrics
Doreswamy, Rajiv
2013-01-01
The number of active liquid rocket engine and solid rocket motor development programs has severely declined since the "space race" of the 1950s and 1960s center dot This downward trend has been exacerbated by the retirement of the Space Shuttle, transition from the Constellation Program to the Space launch System (SLS) and similar activity in DoD programs center dot In addition with consolidation in the industry, the rocket propulsion industrial base is under stress. To Improve the "health" of the RPIB, we need to understand - The current condition of the RPIB - How this compares to past history - The trend of RPIB health center dot This drives the need for a concise set of "metrics" - Analogous to the basic data a physician uses to determine the state of health of his patients - Easy to measure and collect - The trend is often more useful than the actual data point - Can be used to focus on problem areas and develop preventative measures The nation's capability to conceive, design, develop, manufacture, test, and support missions using liquid rocket engines and solid rocket motors that are critical to its national security, economic health and growth, and future scientific needs. center dot The RPIB encompasses US government, academic, and commercial (including industry primes and their supplier base) research, development, test, evaluation, and manufacturing capabilities and facilities. center dot The RPIB includes the skilled workforce, related intellectual property, engineering and support services, and supply chain operations and management. This definition touches the five main segments of the U.S. RPIB as categorized by the USG: defense, intelligence community, civil government, academia, and commercial sector. The nation's capability to conceive, design, develop, manufacture, test, and support missions using liquid rocket engines and solid rocket motors that are critical to its national security, economic health and growth, and future scientific needs
Statistical 2D and 3D shape analysis using Non-Euclidean Metrics
DEFF Research Database (Denmark)
Larsen, Rasmus; Hilger, Klaus Baggesen; Wrobel, Mark Christoph
2002-01-01
We address the problem of extracting meaningful, uncorrelated biological modes of variation from tangent space shape coordinates in 2D and 3D using non-Euclidean metrics. We adapt the maximum autocorrelation factor analysis and the minimum noise fraction transform to shape decomposition. Furtherm......We address the problem of extracting meaningful, uncorrelated biological modes of variation from tangent space shape coordinates in 2D and 3D using non-Euclidean metrics. We adapt the maximum autocorrelation factor analysis and the minimum noise fraction transform to shape decomposition....... Furthermore, we study metrics based on repated annotations of a training set. We define a way of assessing the correlation between landmarks contrary to landmark coordinates. Finally, we apply the proposed methods to a 2D data set consisting of outlines of lungs and a 3D/(4D) data set consisting of sets...
Rodrigues, João Fabrício Mota; Coelho, Marco Túlio Pacheco; Ribeiro, Bruno R.
2018-04-01
Species distribution models (SDM) have been broadly used in ecology to address theoretical and practical problems. Currently, there are two main approaches to generate SDMs: (i) correlative, which is based on species occurrences and environmental predictor layers and (ii) process-based models, which are constructed based on species' functional traits and physiological tolerances. The distributions estimated by each approach are based on different components of species niche. Predictions of correlative models approach species realized niches, while predictions of process-based are more akin to species fundamental niche. Here, we integrated the predictions of fundamental and realized distributions of the freshwater turtle Trachemys dorbigni. Fundamental distribution was estimated using data of T. dorbigni's egg incubation temperature, and realized distribution was estimated using species occurrence records. Both types of distributions were estimated using the same regression approaches (logistic regression and support vector machines), both considering macroclimatic and microclimatic temperatures. The realized distribution of T. dorbigni was generally nested in its fundamental distribution reinforcing theoretical assumptions that the species' realized niche is a subset of its fundamental niche. Both modelling algorithms produced similar results but microtemperature generated better results than macrotemperature for the incubation model. Finally, our results reinforce the conclusion that species realized distributions are constrained by other factors other than just thermal tolerances.
Effect of thematic map misclassification on landscape multi-metric assessment.
Kleindl, William J; Powell, Scott L; Hauer, F Richard
2015-06-01
Advancements in remote sensing and computational tools have increased our awareness of large-scale environmental problems, thereby creating a need for monitoring, assessment, and management at these scales. Over the last decade, several watershed and regional multi-metric indices have been developed to assist decision-makers with planning actions of these scales. However, these tools use remote-sensing products that are subject to land-cover misclassification, and these errors are rarely incorporated in the assessment results. Here, we examined the sensitivity of a landscape-scale multi-metric index (MMI) to error from thematic land-cover misclassification and the implications of this uncertainty for resource management decisions. Through a case study, we used a simplified floodplain MMI assessment tool, whose metrics were derived from Landsat thematic maps, to initially provide results that were naive to thematic misclassification error. Using a Monte Carlo simulation model, we then incorporated map misclassification error into our MMI, resulting in four important conclusions: (1) each metric had a different sensitivity to error; (2) within each metric, the bias between the error-naive metric scores and simulated scores that incorporate potential error varied in magnitude and direction depending on the underlying land cover at each assessment site; (3) collectively, when the metrics were combined into a multi-metric index, the effects were attenuated; and (4) the index bias indicated that our naive assessment model may overestimate floodplain condition of sites with limited human impacts and, to a lesser extent, either over- or underestimated floodplain condition of sites with mixed land use.
Quantitative properties of the Schwarzschild metric
Czech Academy of Sciences Publication Activity Database
Křížek, Michal; Křížek, Filip
2018-01-01
Roč. 2018, č. 1 (2018), s. 1-10 Institutional support: RVO:67985840 Keywords : exterior and interior Schwarzschild metric * proper radius * coordinate radius Subject RIV: BA - General Mathematics OBOR OECD: Applied mathematics http://astro.shu-bg.net/pasb/index_files/Papers/2018/SCHWARZ8.pdf
Strong Ideal Convergence in Probabilistic Metric Spaces
Indian Academy of Sciences (India)
In the present paper we introduce the concepts of strongly ideal convergent sequence and strong ideal Cauchy sequence in a probabilistic metric (PM) space endowed with the strong topology, and establish some basic facts. Next, we define the strong ideal limit points and the strong ideal cluster points of a sequence in this ...
lakemorpho: Calculating lake morphometry metrics in R.
Hollister, Jeffrey; Stachelek, Joseph
2017-01-01
Metrics describing the shape and size of lakes, known as lake morphometry metrics, are important for any limnological study. In cases where a lake has long been the subject of study these data are often already collected and are openly available. Many other lakes have these data collected, but access is challenging as it is often stored on individual computers (or worse, in filing cabinets) and is available only to the primary investigators. The vast majority of lakes fall into a third category in which the data are not available. This makes broad scale modelling of lake ecology a challenge as some of the key information about in-lake processes are unavailable. While this valuable in situ information may be difficult to obtain, several national datasets exist that may be used to model and estimate lake morphometry. In particular, digital elevation models and hydrography have been shown to be predictive of several lake morphometry metrics. The R package lakemorpho has been developed to utilize these data and estimate the following morphometry metrics: surface area, shoreline length, major axis length, minor axis length, major and minor axis length ratio, shoreline development, maximum depth, mean depth, volume, maximum lake length, mean lake width, maximum lake width, and fetch. In this software tool article we describe the motivation behind developing lakemorpho , discuss the implementation in R, and describe the use of lakemorpho with an example of a typical use case.
Contraction theorems in fuzzy metric space
International Nuclear Information System (INIS)
Farnoosh, R.; Aghajani, A.; Azhdari, P.
2009-01-01
In this paper, the results on fuzzy contractive mapping proposed by Dorel Mihet will be proved for B-contraction and C-contraction in the case of George and Veeramani fuzzy metric space. The existence of fixed point with weaker conditions will be proved; that is, instead of the convergence of subsequence, p-convergence of subsequence is used.
Inferring feature relevances from metric learning
DEFF Research Database (Denmark)
Schulz, Alexander; Mokbel, Bassam; Biehl, Michael
2015-01-01
Powerful metric learning algorithms have been proposed in the last years which do not only greatly enhance the accuracy of distance-based classifiers and nearest neighbor database retrieval, but which also enable the interpretability of these operations by assigning explicit relevance weights...
DIGITAL MARKETING: SUCCESS METRICS, FUTURE TRENDS
Preeti Kaushik
2017-01-01
Abstract – Business Marketing is one of the prospective which has been tremendously affected by digital world in last few years. Digital marketing refers to doing advertising through digital channels. This paper provides detailed study of metrics to measure success of digital marketing platform and glimpse of future of technologies by 2020.
Assessing Software Quality Through Visualised Cohesion Metrics
Directory of Open Access Journals (Sweden)
Timothy Shih
2001-05-01
Full Text Available Cohesion is one of the most important factors for software quality as well as maintainability, reliability and reusability. Module cohesion is defined as a quality attribute that seeks for measuring the singleness of the purpose of a module. The module of poor quality can be a serious obstacle to the system quality. In order to design a good software quality, software managers and engineers need to introduce cohesion metrics to measure and produce desirable software. A highly cohesion software is thought to be a desirable constructing. In this paper, we propose a function-oriented cohesion metrics based on the analysis of live variables, live span and the visualization of processing element dependency graph. We give six typical cohesion examples to be measured as our experiments and justification. Therefore, a well-defined, well-normalized, well-visualized and well-experimented cohesion metrics is proposed to indicate and thus enhance software cohesion strength. Furthermore, this cohesion metrics can be easily incorporated with software CASE tool to help software engineers to improve software quality.
Metric propositional neighborhood logics on natural numbers
DEFF Research Database (Denmark)
Bresolin, Davide; Della Monica, Dario; Goranko, Valentin
2013-01-01
Metric Propositional Neighborhood Logic (MPNL) over natural numbers. MPNL features two modalities referring, respectively, to an interval that is “met by” the current one and to an interval that “meets” the current one, plus an infinite set of length constraints, regarded as atomic propositions...
Calabi–Yau metrics and string compactification
Directory of Open Access Journals (Sweden)
Michael R. Douglas
2015-09-01
Full Text Available Yau proved an existence theorem for Ricci-flat Kähler metrics in the 1970s, but we still have no closed form expressions for them. Nevertheless there are several ways to get approximate expressions, both numerical and analytical. We survey some of this work and explain how it can be used to obtain physical predictions from superstring theory.
Goedel-type metrics in various dimensions
International Nuclear Information System (INIS)
Guerses, Metin; Karasu, Atalay; Sarioglu, Oezguer
2005-01-01
Goedel-type metrics are introduced and used in producing charged dust solutions in various dimensions. The key ingredient is a (D - 1)-dimensional Riemannian geometry which is then employed in constructing solutions to the Einstein-Maxwell field equations with a dust distribution in D dimensions. The only essential field equation in the procedure turns out to be the source-free Maxwell's equation in the relevant background. Similarly the geodesics of this type of metric are described by the Lorentz force equation for a charged particle in the lower dimensional geometry. It is explicitly shown with several examples that Goedel-type metrics can be used in obtaining exact solutions to various supergravity theories and in constructing spacetimes that contain both closed timelike and closed null curves and that contain neither of these. Among the solutions that can be established using non-flat backgrounds, such as the Tangherlini metrics in (D - 1)-dimensions, there exists a class which can be interpreted as describing black-hole-type objects in a Goedel-like universe
Strong Statistical Convergence in Probabilistic Metric Spaces
Şençimen, Celaleddin; Pehlivan, Serpil
2008-01-01
In this article, we introduce the concepts of strongly statistically convergent sequence and strong statistically Cauchy sequence in a probabilistic metric (PM) space endowed with the strong topology, and establish some basic facts. Next, we define the strong statistical limit points and the strong statistical cluster points of a sequence in this space and investigate the relations between these concepts.
Language Games: University Responses to Ranking Metrics
Heffernan, Troy A.; Heffernan, Amanda
2018-01-01
League tables of universities that measure performance in various ways are now commonplace, with numerous bodies providing their own rankings of how institutions throughout the world are seen to be performing on a range of metrics. This paper uses Lyotard's notion of language games to theorise that universities are regaining some power over being…
A new universal colour image fidelity metric
Toet, A.; Lucassen, M.P.
2003-01-01
We extend a recently introduced universal grayscale image quality index to a newly developed perceptually decorrelated colour space. The resulting colour image fidelity metric quantifies the distortion of a processed colour image relative to its original version. We evaluated the new colour image
Standardised metrics for global surgical surveillance.
Weiser, Thomas G; Makary, Martin A; Haynes, Alex B; Dziekan, Gerald; Berry, William R; Gawande, Atul A
2009-09-26
Public health surveillance relies on standardised metrics to evaluate disease burden and health system performance. Such metrics have not been developed for surgical services despite increasing volume, substantial cost, and high rates of death and disability associated with surgery. The Safe Surgery Saves Lives initiative of WHO's Patient Safety Programme has developed standardised public health metrics for surgical care that are applicable worldwide. We assembled an international panel of experts to develop and define metrics for measuring the magnitude and effect of surgical care in a population, while taking into account economic feasibility and practicability. This panel recommended six measures for assessing surgical services at a national level: number of operating rooms, number of operations, number of accredited surgeons, number of accredited anaesthesia professionals, day-of-surgery death ratio, and postoperative in-hospital death ratio. We assessed the feasibility of gathering such statistics at eight diverse hospitals in eight countries and incorporated them into the WHO Guidelines for Safe Surgery, in which methods for data collection, analysis, and reporting are outlined.
A Lagrangian-dependent metric space
International Nuclear Information System (INIS)
El-Tahir, A.
1989-08-01
A generalized Lagrangian-dependent metric of the static isotropic spacetime is derived. Its behaviour should be governed by imposing physical constraints allowing to avert the pathological features of gravity at the strong field domain. This would restrict the choice of the Lagrangian form. (author). 10 refs
Clean Cities 2011 Annual Metrics Report
Energy Technology Data Exchange (ETDEWEB)
Johnson, C.
2012-12-01
This report details the petroleum savings and vehicle emissions reductions achieved by the U.S. Department of Energy's Clean Cities program in 2011. The report also details other performance metrics, including the number of stakeholders in Clean Cities coalitions, outreach activities by coalitions and national laboratories, and alternative fuel vehicles deployed.
Clean Cities 2010 Annual Metrics Report
Energy Technology Data Exchange (ETDEWEB)
Johnson, C.
2012-10-01
This report details the petroleum savings and vehicle emissions reductions achieved by the U.S. Department of Energy's Clean Cities program in 2010. The report also details other performance metrics, including the number of stakeholders in Clean Cities coalitions, outreach activities by coalitions and national laboratories, and alternative fuel vehicles deployed.
Genetic basis of a cognitive complexity metric
Hansell, Narelle K; Halford, Graeme S; Andrews, Glenda; Shum, David H K; Harris, Sarah E; Davies, Gail; Franic, Sanja; Christoforou, Andrea; Zietsch, Brendan; Painter, Jodie; Medland, Sarah E; Ehli, Erik A; Davies, Gareth E; Steen, Vidar M; Lundervold, Astri J; Reinvang, Ivar; Montgomery, Grant W; Espeseth, Thomas; Hulshoff Pol, Hilleke E; Starr, John M; Martin, Nicholas G; Le Hellard, Stephanie; Boomsma, Dorret I; Deary, Ian J; Wright, Margaret J
2015-01-01
Relational complexity (RC) is a metric reflecting capacity limitation in relational processing. It plays a crucial role in higher cognitive processes and is an endophenotype for several disorders. However, the genetic underpinnings of complex relational processing have not been investigated. Using
Genetic Basis of a Cognitive Complexity Metric
Hansell, N.K.; Halford, G.S.; Andrews, G.; Shum, D.H.K.; Harris, S.E.; Davies, G.; Franic, S.; Christoforou, A.; Zietsch, B.; Painter, J.; Medland, S.E.; Ehli, E.A.; Davies, G.E.; Steen, V.M.; Lundervold, A.J.; Reinvang, I.; Montgomery, G.W.; Espeseth, T.; Hulshoff Pol, H.E.; Starr, J.M.; Martin, N.G.; Le Hellard, S.; Boomsma, D.I.; Deary, I.J.; Wright, M.J.
2015-01-01
Relational complexity (RC) is a metric reflecting capacity limitation in relational processing. It plays a crucial role in higher cognitive processes and is an endophenotype for several disorders. However, the genetic underpinnings of complex relational processing have not been investigated. Using
Business model metrics : An open repository
Heikkila, M.; Bouwman, W.A.G.A.; Heikkila, J.; Solaimani, S.; Janssen, W.
2015-01-01
Development of successful business models has become a necessity in turbulent business environments, but compared to research on business modeling tools, attention to the role of metrics in designing business models in literature is limited. Building on existing approaches to business models and
Software quality metrics aggregation in industry
Mordal, K.; Anquetil, N.; Laval, J.; Serebrenik, A.; Vasilescu, B.N.; Ducasse, S.
2013-01-01
With the growing need for quality assessment of entire software systems in the industry, new issues are emerging. First, because most software quality metrics are defined at the level of individual software components, there is a need for aggregation methods to summarize the results at the system
Invariance group of the Finster metric function
International Nuclear Information System (INIS)
Asanov, G.S.
1985-01-01
An invariance group of the Finsler metric function is introduced and studied that directly generalized the respective concept (a group of Euclidean rolations) of the Rieman geometry. A sequential description of the isotopic invariance of physical fields on the base of the Finsler geometry is possible in terms of this group
ROLE OF PROFESSIONAL IDENTITY IN SELF-REALIZATION OF PSYCHOLOGISTS-TEACHERS
Directory of Open Access Journals (Sweden)
S I Kudinov
2015-12-01
Full Text Available The article highlights the problem of the role of professional identity in self-realization of psychologists- teachers. Within the frame of a system-defined approach the research identifies and describes the individual- typological features of the phenomena interesting to us. The works that focus on the study of self-realization are subjected to the analysis, as the result it is noted that in this field there are still gaps in the understanding of this issue. Thus, the study from the perspective of the influence of professional identity on the successful self-realization of the personality is recognized as relevant. In the framework of this study the following assumptions are put forward: there is a relationship between the professional identity and successful self- realization of the personality; the level of formation of professional identity has an impact on the success of personality self-realization; the professional identity not fully formed acts as a barrier for creativity, activity, internality and constructive self- realization; fully formed professional identity provides a high success rate of self-realization. The purpose of this study was to investigate the features of self- realization and professional identity of psychologists-teachers. For the study, we used “Multidimensional questionnaire of personality self-realization” (MQPS by S.I. Kudinov, for the study of professional identity the following methods were used: “Professional identity-marginalism” questionnaire by E.P. Ermolaeva and Methods of measuring professional identity (MMPI by L.B. Schneider. The results obtained were subjected to quantitative analysis. In the article the author relies on the data gathered as a result of a study conducted at the Institute of Education Development of the Republic of Bashkortostan (GAOU DPO IRO RB, city of Ufa. The sample consisted of 142 educational psychologists. As a result of the conducted research, the specific relationship
Realizing Scientific Methods for Cyber Security
Energy Technology Data Exchange (ETDEWEB)
Carroll, Thomas E.; Manz, David O.; Edgar, Thomas W.; Greitzer, Frank L.
2012-07-18
There is little doubt among cyber security researchers about the lack of scientic rigor that underlies much of the liter-ature. The issues are manifold and are well documented. Further complicating the problem is insufficient scientic methods to address these issues. Cyber security melds man and machine: we inherit the challenges of computer science, sociology, psychology, and many other elds and create new ones where these elds interface. In this paper we detail a partial list of challenges imposed by rigorous science and survey how other sciences have tackled them, in the hope of applying a similar approach to cyber security science. This paper is by no means comprehensive: its purpose is to foster discussion in the community on how we can improve rigor in cyber security science.
Realization of the Najafi-Golestanian microswimmer
Hubert, Maxime; Grosjean, Galien; Lagubeau, Guillaume; Vandewalle, Nicolas; Grasp Lab, Cesam Research Unit Team; Departamento de Fısica Team
The development of artificial microswimmers, microscopic robots that swim in a fluid like sperm cells and motile bacteria, could cause a leap forward in various fields such as microfluidics, microsystems, or minimally invasive medicine. Nature provides plenty of examples of efficient microswimmers. However, a bottom-up approach, looking at the simplest ingredients needed to generate a microswimmer, can lead to a deeper understanding of the swimming problem. First described by Najafi and Golestanian, a paradigmatic microswimmer is the three-linked-spheres model, which follows a minimalist approach for propulsion by shape shifting. In this presentation, we describe the experimental realisation of this microswimmer using self-assembled ferromagnetic particle at an air-water interface, powered by an uniform oscillating magnetic field. A model, using two harmonic oscillators, reproduces the experimental findings. Because the model remains general, the same approach could be used to design a variety of efficient microswimmers.
PLA realizations for VLSI state machines
Gopalakrishnan, S.; Whitaker, S.; Maki, G.; Liu, K.
1990-01-01
A major problem associated with state assignment procedures for VLSI controllers is obtaining an assignment that produces minimal or near minimal logic. The key item in Programmable Logic Array (PLA) area minimization is the number of unique product terms required by the design equations. This paper presents a state assignment algorithm for minimizing the number of product terms required to implement a finite state machine using a PLA. Partition algebra with predecessor state information is used to derive a near optimal state assignment. A maximum bound on the number of product terms required can be obtained by inspecting the predecessor state information. The state assignment algorithm presented is much simpler than existing procedures and leads to the same number of product terms or less. An area-efficient PLA structure implemented in a 1.0 micron CMOS process is presented along with a summary of the performance for a controller implemented using this design procedure.
Frozen orbit realization using LQR analogy
Nagarajan, N.; Rayan, H. Reno
In the case of remote sensing orbits, the Frozen Orbit concept minimizes altitude variations over a given region using passive means. This is achieved by establishing the mean eccentricity vector at the orbital poles i.e., by fixing the mean argument of perigee at 90 deg with an appropriate eccentricity to balance the perturbations due to zonal harmonics J2 and J3 of the Earth's potential. Eccentricity vector is a vector whose magnitude is the eccentricity and direction is the argument of perigee. The launcher dispersions result in an eccentricity vector which is away from the frozen orbit values. The objective is then to formulate an orbit maneuver strategy to optimize the fuel required to achieve the frozen orbit in the presence of visibility and impulse constraints. It is shown that the motion of the eccentricity vector around the frozen perigee can be approximated as a circle. Combining the circular motion of the eccentricity vector around the frozen point and the maneuver equation, the following discrete equation is obtained. X(k+1) = AX(k) + Bu(k), where X is the state (i.e. eccentricity vector components), A the state transition matrix, u the scalar control force (i.e. dV in this case) and B the control matrix which transforms dV into eccentricity vector change. Based on this, it is shown that the problem of optimizing the fuel can be treated as a Linear Quadratic Regulator (LQR) problem in which the maneuver can be solved by using control system design tools like MATLAB by deriving an analogy LQR design.
Isotopic and continuous realizability of maps in the metastable range
International Nuclear Information System (INIS)
Melikhov, Sergey A
2004-01-01
A continuous map f of a compact n-polyhedron into an orientable piecewise linear m-manifold, m-n≥3, is discretely (isotopically) realizable if it is the uniform limit of a sequence of embeddings g k , k element of N (respectively, of an isotopy g t , t element of [0,∞)), and is continuously realizable if any embedding sufficiently close to f can be included in an arbitrarily small such isotopy. It was shown by the author that for m=2n+1, n≠1, all maps are continuously realizable, but for m=3, n=6 there are maps that are discretely realizable, but not isotopically. The first obstruction o(f) to the isotopic realizability of a discretely realizable map f lies in the kernel K f of the canonical epimorphism between the Steenrod and Cech (2n-m)-dimensional homologies of the singular set of f. It is known that for m=2n, n≥4, this obstruction is complete and f is continuously realizable if and only if the group K f is trivial. In the present paper it is established that f is continuously realizable if and only if K f is trivial even in the metastable range, that is, for m≥3(n+1)/2, n≠1. The proof uses higher cohomology operations. On the other hand, for each n≥9 a map S n →R 2n-5 is constructed that is discretely realizable and has zero obstruction o(f) to the isotopic realizability, but is not isotopically realizable, which fact is detected by the Steenrod square. Thus, in order to determine whether a discretely realizable map in the metastable range is isotopically realizable one cannot avoid using the complete obstruction in the group of Koschorke-Akhmet'ev bordisms.
The Markov moment problem and extremal problems
Kreĭn, M G; Louvish, D
1977-01-01
In this book, an extensive circle of questions originating in the classical work of P. L. Chebyshev and A. A. Markov is considered from the more modern point of view. It is shown how results and methods of the generalized moment problem are interlaced with various questions of the geometry of convex bodies, algebra, and function theory. From this standpoint, the structure of convex and conical hulls of curves is studied in detail and isoperimetric inequalities for convex hulls are established; a theory of orthogonal and quasiorthogonal polynomials is constructed; problems on limiting values of integrals and on least deviating functions (in various metrics) are generalized and solved; problems in approximation theory and interpolation and extrapolation in various function classes (analytic, absolutely monotone, almost periodic, etc.) are solved, as well as certain problems in optimal control of linear objects.
A robust metric for screening outliers from analogue product manufacturing tests responses
Krishnan, S.; Kerkhoff, H.G.
2011-01-01
Mahalanobis distance is one of the commonly used multivariate metrics for finely segregating defective devices from non-defective ones. An associated problem with this approach is the estimation of a robust mean and a covariance matrix. In the absence of such robust estimates, especially in the
A Robust Metric for Screening Outliers from Analogue Product Manufacturing Tests Responses
Krishnan, Shaji; Krishnan, Shaji; Kerkhoff, Hans G.
2011-01-01
Mahalanobis distance is one of the commonly used multivariate metrics for finely segregating defective devices from non-defective ones. An associated problem with this approach is the estimation of a robust mean and a covariance matrix. In the absence of such robust estimates, especially in the
Generally covariant Hamilton-Jacobi equation and rotated liquid sphere metrics
International Nuclear Information System (INIS)
Abdil'din, M.M.; Abdulgafarov, M.K.; Abishev, M.E.
2005-01-01
In the work Lense-Thirring problem on corrected Fock's first approximation metrics by Hamilton-Jacobi method considered. Generally covariant Hamilton-Jacobi equation had been sold by separation of variable method. Path equation of probe particle motion in rotated liquid sphere field is obtained. (author)
Directory of Open Access Journals (Sweden)
Xiangbing Zhou
2012-01-01
Full Text Available We generalize a fixed point theorem in partially ordered complete metric spaces in the study of A. Amini-Harandi and H. Emami (2010. We also give an application on the existence and uniqueness of the positive solution of a multipoint boundary value problem with fractional derivatives.
Hermitian-Einstein metrics on holomorphic vector bundles over Hermitian manifolds
International Nuclear Information System (INIS)
Xi Zhang
2004-07-01
In this paper, we prove the long-time existence of the Hermitian-Einstein flow on a holomorphic vector bundle over a compact Hermitian (non-kaehler) manifold, and solve the Dirichlet problem for the Hermitian-Einstein equations. We also prove the existence of Hermitian-Einstein metrics for holomorphic vector bundles on a class of complete noncompact Hermitian manifolds. (author)
Single realization stochastic FDTD for weak scattering waves in biological random media.
Tan, Tengmeng; Taflove, Allen; Backman, Vadim
2013-02-01
This paper introduces an iterative scheme to overcome the unresolved issues presented in S-FDTD (stochastic finite-difference time-domain) for obtaining ensemble average field values recently reported by Smith and Furse in an attempt to replace the brute force multiple-realization also known as Monte-Carlo approach with a single-realization scheme. Our formulation is particularly useful for studying light interactions with biological cells and tissues having sub-wavelength scale features. Numerical results demonstrate that such a small scale variation can be effectively modeled with a random medium problem which when simulated with the proposed S-FDTD indeed produces a very accurate result.
International Nuclear Information System (INIS)
Doroshenko, G.G.; Panchenko, S.V.; Chudajkin, O.G.
1987-01-01
The paper is aimed at determination of ways for practical realization of main sanitary requirements concerning environment and population protection under NPP operation. The idea of the requirements is reduced to not increasing permissible limits for radiation doses, minimum irradiation of population and decrease of unjustified irradiation of personnel. The given problem may be fully solved only in case of studying real chacteristics of operating reactors, taking into account statistic nature of effluents of inert radioactive gases (IRG). Methods of developing a system of working and reference standards of IRG effluents at NPPs are suggested. The considered approach may be realized in practice as the All-Union state on branch standards
Fast realization of nonrecursive digital filters with limits on signal delay
Titov, M. A.; Bondarenko, N. N.
1983-07-01
Attention is given to the problem of achieving a fast realization of nonrecursive digital filters with the aim of reducing signal delay. It is shown that a realization wherein the impulse characteristic of the filter is divided into blocks satisfies the delay requirements and is almost as economical in terms of the number of multiplications as conventional fast convolution. In addition, the block method leads to a reduction in the needed size of the memory and in the number of additions; the short-convolution procedure is substantially simplified. Finally, the block method facilitates the paralleling of computations owing to the simple transfers between subfilters.
Metric dimensional reduction at singularities with implications to Quantum Gravity
International Nuclear Information System (INIS)
Stoica, Ovidiu Cristinel
2014-01-01
A series of old and recent theoretical observations suggests that the quantization of gravity would be feasible, and some problems of Quantum Field Theory would go away if, somehow, the spacetime would undergo a dimensional reduction at high energy scales. But an identification of the deep mechanism causing this dimensional reduction would still be desirable. The main contribution of this article is to show that dimensional reduction effects are due to General Relativity at singularities, and do not need to be postulated ad-hoc. Recent advances in understanding the geometry of singularities do not require modification of General Relativity, being just non-singular extensions of its mathematics to the limit cases. They turn out to work fine for some known types of cosmological singularities (black holes and FLRW Big-Bang), allowing a choice of the fundamental geometric invariants and physical quantities which remain regular. The resulting equations are equivalent to the standard ones outside the singularities. One consequence of this mathematical approach to the singularities in General Relativity is a special, (geo)metric type of dimensional reduction: at singularities, the metric tensor becomes degenerate in certain spacetime directions, and some properties of the fields become independent of those directions. Effectively, it is like one or more dimensions of spacetime just vanish at singularities. This suggests that it is worth exploring the possibility that the geometry of singularities leads naturally to the spontaneous dimensional reduction needed by Quantum Gravity. - Highlights: • The singularities we introduce are described by finite geometric/physical objects. • Our singularities are accompanied by dimensional reduction effects. • They affect the metric, the measure, the topology, the gravitational DOF (Weyl = 0). • Effects proposed in other approaches to Quantum Gravity are obtained naturally. • The geometric dimensional reduction obtained
CONCEPTUAL APPROACHES TO FORMING MECHANISM OF INVESTMENT SAFETY REALIZATION
Directory of Open Access Journals (Sweden)
Vladimir Talover
2016-11-01
Full Text Available The purpose of the paper is theoretical justification of theoretical approaches while developing the mechanism of the state investment safety. The tasks of the system of the national economy investment safety are the following: developing investment potential, creating favourable investment climate, forming mechanisms of stable investment activity in the key branches of economy. At the same time, it should also be noted that the complex approach that would allow sufficiently justifying and practically solve the problems of defining indicators, factors of the investment policy and directions of its assurance in realization of the mechanism of investment policy is not sufficiently developed nowadays. This fact determines research topicality. The issue of assuring investment safety is of a special importance in Ukraine that has to assure market economy development, to overcome deformations in the economy structure, to renew products and production apparatus in the industry, to master new kinds of activities. Methodology. The survey is based on the generalization and development of views of the scientific-economic schools, uses approaches of the international agencies and recommendation and normative materials of Ukraine concerning realization of the state investment policy as a totality of interrelated levels and subsystems that allows establishing main functions of the investment safety system. Results of the survey shows that the mechanism of investment safety includes some kinds, forms and methods of organizing investment relations and investment activity, ways of their quantitative determination and establishing interdependence. The concept of investment policy is based on the complex approach and includes the blocks which are locally structured in such way that they allow forming adequate system of its indicators and conducting monitoring of their changes under the influence of the determined factors. The peculiarities and elements of
Observable traces of non-metricity: New constraints on metric-affine gravity
Delhom-Latorre, Adrià; Olmo, Gonzalo J.; Ronco, Michele
2018-05-01
Relaxing the Riemannian condition to incorporate geometric quantities such as torsion and non-metricity may allow to explore new physics associated with defects in a hypothetical space-time microstructure. Here we show that non-metricity produces observable effects in quantum fields in the form of 4-fermion contact interactions, thereby allowing us to constrain the scale of non-metricity to be greater than 1 TeV by using results on Bahbah scattering. Our analysis is carried out in the framework of a wide class of theories of gravity in the metric-affine approach. The bound obtained represents an improvement of several orders of magnitude to previous experimental constraints.
Kunze, H. E.; La Torre, D.; Vrscay, E. R.
2009-01-01
In this paper we are concerned with differential equations with random coefficients which will be considered as random fixed point equations of the form T([omega],x([omega]))=x([omega]), [omega][set membership, variant][Omega]. Here T:[Omega]×X-->X is a random integral operator, is a probability space and X is a complete metric space. We consider the following inverse problem for such equations: Given a set of realizations of the fixed point of T (possibly the interpolations of different observational data sets), determine the operator T or the mean value of its random components, as appropriate. We solve the inverse problem for this class of equations by using the collage theorem for contraction mappings.
Conformal and related changes of metric on the product of two almost contact metric manifolds.
Blair, D. E.
1990-01-01
This paper studies conformal and related changes of the product metric on the product of two almost contact metric manifolds. It is shown that if one factor is Sasakian, the other is not, but that locally the second factor is of the type studied by Kenmotsu. The results are more general and given in terms of trans-Sasakian, α-Sasakian and β-Kenmotsu structures.
Some observations on the realization of QCD
International Nuclear Information System (INIS)
Thomas, A.W.
1990-01-01
For many years high energy and nuclear physics tended to develop in parallel with often little constructive interaction. With the successes of the Standard Model (SM) a large part of the high energy community has been driven to bigger machines and higher energies in the search for t-quarks, Higgs bosons, supersymmetric particles, etc. The strong interaction section of the SM is believed to be correctly described by quantum chromodynamics (QCD). However, knowing the Lagragian and understanding what the physics contains are two different matters - as any solid-state physicist will testify. Because of its difficulty the strong interaction problem has, to a certain extent, been passed back to the nuclear community. With its history of successful model building and constructive interaction between theory and experiment this is probably a good thing. There is a very real sense in which modern nuclear physics can be regarded as the study of strongly interacting systems, including the individual hadrons. In this paper the author examines a number of examples where hadron structure theorists can learn something from nuclear theorists and vice-versa
Realizing Technologies for Magnetized Target Fusion
Energy Technology Data Exchange (ETDEWEB)
Wurden, Glen A. [Los Alamos National Laboratory
2012-08-24
Researchers are making progress with a range of magneto-inertial fusion (MIF) concepts. All of these approaches use the addition of a magnetic field to a target plasma, and then compress the plasma to fusion conditions. The beauty of MIF is that driver power requirements are reduced, compared to classical inertial fusion approaches, and simultaneously the compression timescales can be longer, and required implosion velocities are slower. The presence of a sufficiently large Bfield expands the accessibility to ignition, even at lower values of the density-radius product, and can confine fusion alphas. A key constraint is that the lifetime of the MIF target plasma has to be matched to the timescale of the driver technology (whether liners, heavy ions, or lasers). To achieve sufficient burn-up fraction, scaling suggests that larger yields are more effective. To handle the larger yields (GJ level), thick liquid wall chambers are certainly desired (no plasma/neutron damage materials problem) and probably required. With larger yields, slower repetition rates ({approx}0.1-1 Hz) for this intrinsically pulsed approach to fusion are possible, which means that chamber clearing between pulses can be accomplished on timescales that are compatible with simple clearing techniques (flowing liquid droplet curtains). However, demonstration of the required reliable delivery of hundreds of MJ of energy, for millions of pulses per year, is an ongoing pulsed power technical challenge.
A lighting metric for quantitative evaluation of accent lighting systems
Acholo, Cyril O.; Connor, Kenneth A.; Radke, Richard J.
2014-09-01
Accent lighting is critical for artwork and sculpture lighting in museums, and subject lighting for stage, Film and television. The research problem of designing effective lighting in such settings has been revived recently with the rise of light-emitting-diode-based solid state lighting. In this work, we propose an easy-to-apply quantitative measure of the scene's visual quality as perceived by human viewers. We consider a well-accent-lit scene as one which maximizes the information about the scene (in an information-theoretic sense) available to the user. We propose a metric based on the entropy of the distribution of colors, which are extracted from an image of the scene from the viewer's perspective. We demonstrate that optimizing the metric as a function of illumination configuration (i.e., position, orientation, and spectral composition) results in natural, pleasing accent lighting. We use a photorealistic simulation tool to validate the functionality of our proposed approach, showing its successful application to two- and three-dimensional scenes.
Metrical expectations from preceding prosody influence perception of lexical stress.
Brown, Meredith; Salverda, Anne Pier; Dilley, Laura C; Tanenhaus, Michael K
2015-04-01
Two visual-world experiments tested the hypothesis that expectations based on preceding prosody influence the perception of suprasegmental cues to lexical stress. The results demonstrate that listeners' consideration of competing alternatives with different stress patterns (e.g., 'jury/gi'raffe) can be influenced by the fundamental frequency and syllable timing patterns across material preceding a target word. When preceding stressed syllables distal to the target word shared pitch and timing characteristics with the first syllable of the target word, pictures of alternatives with primary lexical stress on the first syllable (e.g., jury) initially attracted more looks than alternatives with unstressed initial syllables (e.g., giraffe). This effect was modulated when preceding unstressed syllables had pitch and timing characteristics similar to the initial syllable of the target word, with more looks to alternatives with unstressed initial syllables (e.g., giraffe) than to those with stressed initial syllables (e.g., jury). These findings suggest that expectations about the acoustic realization of upcoming speech include information about metrical organization and lexical stress and that these expectations constrain the initial interpretation of suprasegmental stress cues. These distal prosody effects implicate online probabilistic inferences about the sources of acoustic-phonetic variation during spoken-word recognition. (c) 2015 APA, all rights reserved.
Introduction of article-processing charges for Population Health Metrics
Directory of Open Access Journals (Sweden)
Murray Christopher JL
2003-11-01
Full Text Available Abstract Population Health Metrics is an open-access online electronic journal published by BioMed Central – it is universally and freely available online to everyone, its authors retain copyright, and it is archived in at least one internationally recognised free repository. To fund this, from November 1 2003, authors of articles accepted for publication will be asked to pay an article-processing charge of US$500. This editorial outlines the reasons for the introduction of article-processing charges and the way in which this policy will work. Waiver requests will be considered on a case-by-case basis, by the Editor-in-Chief. Article-processing charges will not apply to authors whose institutions are 'members' of BioMed Central. Current members include NHS England, the World Health Organization, the US National Institutes of Health, Harvard, Princeton and Yale universities, and all UK universities. No charge is made for articles that are rejected after peer review. Many funding agencies have also realized the importance of open access publishing and have specified that their grants may be used directly to pay APCs.
Light-front realization of chiral symmetry breaking
International Nuclear Information System (INIS)
Itakura, Kazunori; Maedan, Shinji
2001-01-01
We discuss a description of chiral symmetry breaking in the light-front (LF) formalism. Based on careful analyses of several modes, we give clear answers to the following three fundamental questions: (i) What is the difference between the LF chiral transformation and the ordinary chiral transformation? (ii) How does a gap equation for the chiral condensate emerge? (iii) What is the consequence of the coexistence of a nonzero chiral condensate and the trivial Fock vacuum? The answer to Question (i) is given through a classical analysis of each model. Question (ii) is answered based on our recognition of the importance of characteristic constraints, such as the zero-mode and fermionic constraints. Question (iii) is intimately related to another important problem, reconciliation of the nonzero chiral condensate ≠ 0 and the invariance of the vacuum under the LF chiral transformation Q 5 LF | 0> = 0. This and Question (iii) are understood in terms of the modified chiral transformation laws of the dependent variables. The characteristic ways in which the chiral symmetry breaking is realized are that the chiral charge Q 5 LF is no longer conserved and that the transformation of the scalar and pseudoscalar fields is modified. We also discuss other outcomes, such as the light-cone wave function of the pseudoscalar meson in the Nambu-Jona-Lasinio model. (author)
How to realize a nuclear-free Korean peninsula
International Nuclear Information System (INIS)
Yun, Duk-min
1992-01-01
It is certain that, unless the nuclear issue is solved, there can be no progress in inter-Korean relations. To this end, comprehensive and intrusive mutual inspections of any suspicious sites, as well as IAEA inspections, should certainly be implemented. Once international and bilateral arrangements for nuclear inspection are agreed and implemented to the satisfaction of the parties concerned, this will not only solve the problem of nuclear proliferation, but also lay a firm foundation for greater confidence-building measures on the Korean peninsula. This could also be a valuable example for future arms control in Korea. However, even mutual inspection between the two Koreas cannot necessarily guarantee a nuclear-free Korea. The most effective way to ensure the denuclearization of Korea may be to remove elements that the two Koreas perceive as incentives to go nuclear, in parallel with operating a tight and stable verification regime based on mutual and international inspections. Since the major reasons to go nuclear in Korea are military threats and mutual distrust between the two Koreas, no efforts should be spared to rectify these situations. Therefore, confidence- and security-building measures, including full-scale arms control, must be carried out in order to realize and preserve a nuclear-free Korea. In the long run, the greatest contribution to reducing the threat of nuclear proliferation in the Korean peninsula will be through improving overall relations between South and North Korea
A criterion for flatness in minimal area metrics that define string diagrams
International Nuclear Information System (INIS)
Ranganathan, K.; Massachusetts Inst. of Tech., Cambridge, MA
1992-01-01
It has been proposed that the string diagrams of closed string field theory be defined by a minimal area problem that requires that all nontrivial homotopy curves have length greater than or equal to 2π. Consistency requires that the minimal area metric be flat in a neighbourhood of the punctures. The theorem proven in this paper, yields a criterion which if satisfied, will ensure this requirement. The theorem states roughly that the metric is flat in an open set, U if there is a unique closed curve of length 2π through every point in U and all of these closed curves are in the same free homotopy class. (orig.)
Metrics for measuring distances in configuration spaces
International Nuclear Information System (INIS)
Sadeghi, Ali; Ghasemi, S. Alireza; Schaefer, Bastian; Mohr, Stephan; Goedecker, Stefan; Lill, Markus A.
2013-01-01
In order to characterize molecular structures we introduce configurational fingerprint vectors which are counterparts of quantities used experimentally to identify structures. The Euclidean distance between the configurational fingerprint vectors satisfies the properties of a metric and can therefore safely be used to measure dissimilarities between configurations in the high dimensional configuration space. In particular we show that these metrics are a perfect and computationally cheap replacement for the root-mean-square distance (RMSD) when one has to decide whether two noise contaminated configurations are identical or not. We introduce a Monte Carlo approach to obtain the global minimum of the RMSD between configurations, which is obtained from a global minimization over all translations, rotations, and permutations of atomic indices
A perceptual metric for photo retouching.
Kee, Eric; Farid, Hany
2011-12-13
In recent years, advertisers and magazine editors have been widely criticized for taking digital photo retouching to an extreme. Impossibly thin, tall, and wrinkle- and blemish-free models are routinely splashed onto billboards, advertisements, and magazine covers. The ubiquity of these unrealistic and highly idealized images has been linked to eating disorders and body image dissatisfaction in men, women, and children. In response, several countries have considered legislating the labeling of retouched photos. We describe a quantitative and perceptually meaningful metric of photo retouching. Photographs are rated on the degree to which they have been digitally altered by explicitly modeling and estimating geometric and photometric changes. This metric correlates well with perceptual judgments of photo retouching and can be used to objectively judge by how much a retouched photo has strayed from reality.
Machine Learning for ATLAS DDM Network Metrics
Lassnig, Mario; The ATLAS collaboration; Vamosi, Ralf
2016-01-01
The increasing volume of physics data is posing a critical challenge to the ATLAS experiment. In anticipation of high luminosity physics, automation of everyday data management tasks has become necessary. Previously many of these tasks required human decision-making and operation. Recent advances in hardware and software have made it possible to entrust more complicated duties to automated systems using models trained by machine learning algorithms. In this contribution we show results from our ongoing automation efforts. First, we describe our framework for distributed data management and network metrics, automatically extract and aggregate data, train models with various machine learning algorithms, and eventually score the resulting models and parameters. Second, we use these models to forecast metrics relevant for network-aware job scheduling and data brokering. We show the characteristics of the data and evaluate the forecasting accuracy of our models.
Beyond Lovelock gravity: Higher derivative metric theories
Crisostomi, M.; Noui, K.; Charmousis, C.; Langlois, D.
2018-02-01
We consider theories describing the dynamics of a four-dimensional metric, whose Lagrangian is diffeomorphism invariant and depends at most on second derivatives of the metric. Imposing degeneracy conditions we find a set of Lagrangians that, apart form the Einstein-Hilbert one, are either trivial or contain more than 2 degrees of freedom. Among the partially degenerate theories, we recover Chern-Simons gravity, endowed with constraints whose structure suggests the presence of instabilities. Then, we enlarge the class of parity violating theories of gravity by introducing new "chiral scalar-tensor theories." Although they all raise the same concern as Chern-Simons gravity, they can nevertheless make sense as low energy effective field theories or, by restricting them to the unitary gauge (where the scalar field is uniform), as Lorentz breaking theories with a parity violating sector.
Chernozhukov, Victor; Hansen, Chris; Spindler, Martin
2016-01-01
The package High-dimensional Metrics (\\Rpackage{hdm}) is an evolving collection of statistical methods for estimation and quantification of uncertainty in high-dimensional approximately sparse models. It focuses on providing confidence intervals and significance testing for (possibly many) low-dimensional subcomponents of the high-dimensional parameter vector. Efficient estimators and uniformly valid confidence intervals for regression coefficients on target variables (e.g., treatment or poli...
Interiors of Vaidya's radiating metric: Gravitational collapse
International Nuclear Information System (INIS)
Fayos, F.; Jaen, X.; Llanta, E.; Senovilla, J.M.M.
1992-01-01
Using the Darmois junction conditions, we give the necessary and sufficient conditions for the matching of a general spherically symmetric metric to a Vaidya radiating solution. We present also these conditions in terms of the physical quantities of the corresponding energy-momentum tensors. The physical interpretation of the results and their possible applications are studied, and we also perform a detailed analysis of previous work on the subject by other authors
Anisotropic rectangular metric for polygonal surface remeshing
Pellenard, Bertrand
2013-06-18
We propose a new method for anisotropic polygonal surface remeshing. Our algorithm takes as input a surface triangle mesh. An anisotropic rectangular metric, defined at each triangle facet of the input mesh, is derived from both a user-specified normal-based tolerance error and the requirement to favor rectangle-shaped polygons. Our algorithm uses a greedy optimization procedure that adds, deletes and relocates generators so as to match two criteria related to partitioning and conformity.
A Metrics Approach for Collaborative Systems
Directory of Open Access Journals (Sweden)
Cristian CIUREA
2009-01-01
Full Text Available This article presents different types of collaborative systems, their structure and classification. This paper defines the concept of virtual campus as a collaborative system. It builds architecture for virtual campus oriented on collaborative training processes. It analyses the quality characteristics of collaborative systems and propose techniques for metrics construction and validation in order to evaluate them. The article analyzes different ways to increase the efficiency and the performance level in collaborative banking systems.
Preserved Network Metrics across Translated Texts
Cabatbat, Josephine Jill T.; Monsanto, Jica P.; Tapang, Giovanni A.
2014-09-01
Co-occurrence language networks based on Bible translations and the Universal Declaration of Human Rights (UDHR) translations in different languages were constructed and compared with random text networks. Among the considered network metrics, the network size, N, the normalized betweenness centrality (BC), and the average k-nearest neighbors, knn, were found to be the most preserved across translations. Moreover, similar frequency distributions of co-occurring network motifs were observed for translated texts networks.
Anisotropic rectangular metric for polygonal surface remeshing
Pellenard, Bertrand; Morvan, Jean-Marie; Alliez, Pierre
2013-01-01
We propose a new method for anisotropic polygonal surface remeshing. Our algorithm takes as input a surface triangle mesh. An anisotropic rectangular metric, defined at each triangle facet of the input mesh, is derived from both a user-specified normal-based tolerance error and the requirement to favor rectangle-shaped polygons. Our algorithm uses a greedy optimization procedure that adds, deletes and relocates generators so as to match two criteria related to partitioning and conformity.
Smart Grid Status and Metrics Report
Energy Technology Data Exchange (ETDEWEB)
Balducci, Patrick J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Weimar, Mark R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kirkham, Harold [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
2014-07-01
To convey progress made in achieving the vision of a smart grid, this report uses a set of six characteristics derived from the National Energy Technology Laboratory Modern Grid Strategy. It measures 21 metrics to provide insight into the grid’s capacity to embody these characteristics. This report looks across a spectrum of smart grid concerns to measure the status of smart grid deployment and impacts.
The Planck Vacuum and the Schwarzschild Metrics
Directory of Open Access Journals (Sweden)
Daywitt W. C.
2009-07-01
Full Text Available The Planck vacuum (PV is assumed to be the source of the visible universe. So under conditions of sufficient stress, there must exist a pathway through which energy from the PV can travel into this universe. Conversely, the passage of energy from the visible universe to the PV must also exist under the same stressful conditions. The following examines two versions of the Schwarzschild metric equation for compatability with this open-pathway idea.
Metrics and Its Function in Poetry
Institute of Scientific and Technical Information of China (English)
XIAO Zhong-qiong; CHEN Min-jie
2013-01-01
Poetry is a special combination of musical and linguistic qualities-of sounds both regarded as pure sound and as mean-ingful speech. Part of the pleasure of poetry lies in its relationship with music. Metrics, including rhythm and meter, is an impor-tant method for poetry to express poetic sentiment. Through the introduction of poetic language and typical examples, the writer of this paper tries to discuss the relationship between sound and meaning.
International Nuclear Information System (INIS)
Li Cavoli, P.
2016-01-01
This study concerns the domain of the microelectronics. It consists in the study of the impact of the 3D morphology of the energy deposit on the Single Event Effect (SEE) modeling, induced by atmospheric muons. Over a first phase, the approach has consisted in the modeling of the energy deposit induced by protons in nano-metric volumes. For that purpose the use of the Monte Carlo code GEANT4 has allowed us to simulate and stock in a database the tracks characteristics of the energy deposit induced by protons. Once the approach validated for the protons, simulations of the energy deposit induced by muons have been realized. A CCD camera has been used in order to measure the radiative atmospheric environment and to constrain the modeling of the energy deposit induced by muons. This study highlights and quantify the contribution of the radial distribution of the energy deposit induced by protons in nano-metric volumes for the SEE prediction. On the other hand, the study shows that the contribution of the radial distribution of the energy deposit induced by muons in nano-metric volumes has a negligible impact on the SEE modeling. It will be interesting to realize measurements of the energy deposit induced by muons in nano-metric technologies under particle accelerator. This will allow to bring experimental data still nonexistent necessary to the development of new physical models more accurate on the modeling of the energy deposit induced by muons. (author)
Image characterization metrics for muon tomography
Luo, Weidong; Lehovich, Andre; Anashkin, Edward; Bai, Chuanyong; Kindem, Joel; Sossong, Michael; Steiger, Matt
2014-05-01
Muon tomography uses naturally occurring cosmic rays to detect nuclear threats in containers. Currently there are no systematic image characterization metrics for muon tomography. We propose a set of image characterization methods to quantify the imaging performance of muon tomography. These methods include tests of spatial resolution, uniformity, contrast, signal to noise ratio (SNR) and vertical smearing. Simulated phantom data and analysis methods were developed to evaluate metric applicability. Spatial resolution was determined as the FWHM of the point spread functions in X, Y and Z axis for 2.5cm tungsten cubes. Uniformity was measured by drawing a volume of interest (VOI) within a large water phantom and defined as the standard deviation of voxel values divided by the mean voxel value. Contrast was defined as the peak signals of a set of tungsten cubes divided by the mean voxel value of the water background. SNR was defined as the peak signals of cubes divided by the standard deviation (noise) of the water background. Vertical smearing, i.e. vertical thickness blurring along the zenith axis for a set of 2 cm thick tungsten plates, was defined as the FWHM of vertical spread function for the plate. These image metrics provided a useful tool to quantify the basic imaging properties for muon tomography.
A Fundamental Metric for Metal Recycling Applied to Coated Magnesium
Meskers, C.E.M.; Reuter, M.A.; Boin, U.; Kvithyld, A.
2008-01-01
A fundamental metric for the assessment of the recyclability and, hence, the sustainability of coated magnesium scrap is presented; this metric combines kinetics and thermodynamics. The recycling process, consisting of thermal decoating and remelting, was studied by thermogravimetry and differential
Ideal Based Cyber Security Technical Metrics for Control Systems
Energy Technology Data Exchange (ETDEWEB)
W. F. Boyer; M. A. McQueen
2007-10-01
Much of the world's critical infrastructure is at risk from attack through electronic networks connected to control systems. Security metrics are important because they provide the basis for management decisions that affect the protection of the infrastructure. A cyber security technical metric is the security relevant output from an explicit mathematical model that makes use of objective measurements of a technical object. A specific set of technical security metrics are proposed for use by the operators of control systems. Our proposed metrics are based on seven security ideals associated with seven corresponding abstract dimensions of security. We have defined at least one metric for each of the seven ideals. Each metric is a measure of how nearly the associated ideal has been achieved. These seven ideals provide a useful structure for further metrics development. A case study shows how the proposed metrics can be applied to an operational control system.
43 CFR 12.915 - Metric system of measurement.
2010-10-01
... procurements, grants, and other business-related activities. Metric implementation may take longer where the... recipient, such as when foreign competitors are producing competing products in non-metric units. (End of...
The Jacobi metric for timelike geodesics in static spacetimes
Gibbons, G. W.
2016-01-01
It is shown that the free motion of massive particles moving in static spacetimes is given by the geodesics of an energy-dependent Riemannian metric on the spatial sections analogous to Jacobi's metric in classical dynamics. In the massless limit Jacobi's metric coincides with the energy independent Fermat or optical metric. For stationary metrics, it is known that the motion of massless particles is given by the geodesics of an energy independent Finslerian metric of Randers type. The motion of massive particles is governed by neither a Riemannian nor a Finslerian metric. The properies of the Jacobi metric for massive particles moving outside the horizon of a Schwarschild black hole are described. By constrast with the massless case, the Gaussian curvature of the equatorial sections is not always negative.
Evaluation of Subjective and Objective Performance Metrics for Haptically Controlled Robotic Systems
Directory of Open Access Journals (Sweden)
Cong Dung Pham
2014-07-01
Full Text Available This paper studies in detail how different evaluation methods perform when it comes to describing the performance of haptically controlled mobile manipulators. Particularly, we investigate how well subjective metrics perform compared to objective metrics. To find the best metrics to describe the performance of a control scheme is challenging when human operators are involved; how the user perceives the performance of the controller does not necessarily correspond to the directly measurable metrics normally used in controller evaluation. It is therefore important to study whether there is any correspondence between how the user perceives the performance of a controller, and how it performs in terms of directly measurable metrics such as the time used to perform a task, number of errors, accuracy, and so on. To perform these tests we choose a system that consists of a mobile manipulator that is controlled by an operator through a haptic device. This is a good system for studying different performance metrics as the performance can be determined by subjective metrics based on feedback from the users, and also as objective and directly measurable metrics. The system consists of a robotic arm which provides for interaction and manipulation, which is mounted on a mobile base which extends the workspace of the arm. The operator thus needs to perform both interaction and locomotion using a single haptic device. While the position of the on-board camera is determined by the base motion, the principal control objective is the motion of the manipulator arm. This calls for intelligent control allocation between the base and the manipulator arm in order to obtain intuitive control of both the camera and the arm. We implement three different approaches to the control allocation problem, i.e., whether the vehicle or manipulator arm actuation is applied to generate the desired motion. The performance of the different control schemes is evaluated, and our
Factor structure of the Tomimatsu-Sato metrics
International Nuclear Information System (INIS)
Perjes, Z.
1989-02-01
Based on an earlier result stating that δ = 3 Tomimatsu-Sato (TS) metrics can be factored over the field of integers, an analogous representation for higher TS metrics was sought. It is shown that the factoring property of TS metrics follows from the structure of special Hankel determinants. A set of linear algebraic equations determining the factors was defined, and the factors of the first five TS metrics were tabulated, together with their primitive factors. (R.P.) 4 refs.; 2 tabs
What can article-level metrics do for you?
Fenner, Martin
2013-10-01
Article-level metrics (ALMs) provide a wide range of metrics about the uptake of an individual journal article by the scientific community after publication. They include citations, usage statistics, discussions in online comments and social media, social bookmarking, and recommendations. In this essay, we describe why article-level metrics are an important extension of traditional citation-based journal metrics and provide a number of example from ALM data collected for PLOS Biology.
von Schneidemesser, E.; Schmale, J.; Van Aardenne, J.
2013-12-01
Air pollution and climate change are often treated at national and international level as separate problems under different regulatory or thematic frameworks and different policy departments. With air pollution and climate change being strongly linked with regard to their causes, effects and mitigation options, the integration of policies that steer air pollutant and greenhouse gas emission reductions might result in cost-efficient, more effective and thus more sustainable tackling of the two problems. To support informed decision making and to work towards an integrated air quality and climate change mitigation policy requires the identification, quantification and communication of present-day and potential future co-benefits and trade-offs. The identification of co-benefits and trade-offs requires the application of appropriate metrics that are well rooted in science, easy to understand and reflect the needs of policy, industry and the public for informed decision making. For the purpose of this workshop, metrics were loosely defined as a quantified measure of effect or impact used to inform decision-making and to evaluate mitigation measures. The workshop held on October 9 and 10 and co-organized between the European Environment Agency and the Institute for Advanced Sustainability Studies brought together representatives from science, policy, NGOs, and industry to discuss whether current available metrics are 'fit for purpose' or whether there is a need to develop alternative metrics or reassess the way current metrics are used and communicated. Based on the workshop outcome the presentation will (a) summarize the informational needs and current application of metrics by the end-users, who, depending on their field and area of operation might require health, policy, and/or economically relevant parameters at different scales, (b) provide an overview of the state of the science of currently used and newly developed metrics, and the scientific validity of these
Digital Fractional Order Controllers Realized by PIC Microprocessor: Experimental Results
Petras, I.; Grega, S.; Dorcak, L.
2003-01-01
This paper deals with the fractional-order controllers and their possible hardware realization based on PIC microprocessor and numerical algorithm coded in PIC Basic. The mathematical description of the digital fractional -order controllers and approximation in the discrete domain are presented. An example of realization of the particular case of digital fractional-order PID controller is shown and described.
Aspect-Oriented Change Realizations and Their Interaction
DEFF Research Database (Denmark)
Vranić, Valentino; Menkyna, Radoslav; Bebjak, Michal
2009-01-01
With aspect-oriented programming, changes can be treated explicitly and directly at the programming language level. An approach to aspect-oriented change realization based on a two-level change type model is presented in this paper. In this approach, aspect-oriented change realizations are mainly...
Realized range-based estimation of integrated variance
DEFF Research Database (Denmark)
Christensen, Kim; Podolskij, Mark
2007-01-01
We provide a set of probabilistic laws for estimating the quadratic variation of continuous semimartingales with the realized range-based variance-a statistic that replaces every squared return of the realized variance with a normalized squared range. If the entire sample path of the process is a...
Proposal of Realization Restricted Quantum Game with Linear Optic Method
International Nuclear Information System (INIS)
Zhao Haijun; Fang Ximing
2006-01-01
We present a quantum game with the restricted strategic space and its realization with linear optical system, which can be played by two players who are separated remotely. This game can also be realized on any other quantum computers. We find that the constraint brings some interesting properties that are useful for making game models.
Realizing e-government benefits with minimal capabilities
DEFF Research Database (Denmark)
Pedersen, Keld
2017-01-01
but to fully automate processes the reliance on formal benefits realization practices is decreased. Research limitations/implications — The findings are based on single case. Originality/value — There is only little empirical research studying benefits realization in a public sector context. Furthermore...
Discrete causal theory emergent spacetime and the causal metric hypothesis
Dribus, Benjamin F
2017-01-01
This book evaluates and suggests potentially critical improvements to causal set theory, one of the best-motivated approaches to the outstanding problems of fundamental physics. Spacetime structure is of central importance to physics beyond general relativity and the standard model. The causal metric hypothesis treats causal relations as the basis of this structure. The book develops the consequences of this hypothesis under the assumption of a fundamental scale, with smooth spacetime geometry viewed as emergent. This approach resembles causal set theory, but differs in important ways; for example, the relative viewpoint, emphasizing relations between pairs of events, and relationships between pairs of histories, is central. The book culminates in a dynamical law for quantum spacetime, derived via generalized path summation.
Calculation of the Connected Dominating Set Considering Vertex Importance Metrics
Directory of Open Access Journals (Sweden)
Francisco Vazquez-Araujo
2018-01-01
Full Text Available The computation of a set constituted by few vertices to define a virtual backbone supporting information interchange is a problem that arises in many areas when analysing networks of different natures, like wireless, brain, or social networks. Recent papers propose obtaining such a set of vertices by computing the connected dominating set (CDS of a graph. In recent works, the CDS has been obtained by considering that all vertices exhibit similar characteristics. However, that assumption is not valid for complex networks in which their vertices can play different roles. Therefore, we propose finding the CDS by taking into account several metrics which measure the importance of each network vertex e.g., error probability, entropy, or entropy variation (EV.
Embeddings for the Schwarzschild metric: classification and new results
International Nuclear Information System (INIS)
Paston, S A; Sheykin, A A
2012-01-01
We suggest a method to search the embeddings of Riemannian spaces with a high enough symmetry in a flat ambient space. It is based on a procedure of construction surfaces with a given symmetry. The method is used to classify the embeddings of the Schwarzschild metric which have the symmetry of this solution, and all such embeddings in a six-dimensional ambient space (i.e. a space with a minimal possible dimension) are constructed. Four of the six possible embeddings are already known, while the two others are new. One of the new embeddings is asymptotically flat, while the other embeddings in a six-dimensional ambient space do not have this property. The asymptotically flat embedding can be of use in the analysis of the many-body problem, as well as for the development of gravity description as a theory of a surface in a flat ambient space. (paper)
Higher-order geodesic deviations applied to the Kerr metric
Colistete, R J; Kerner, R
2002-01-01
Starting with an exact and simple geodesic, we generate approximate geodesics by summing up higher-order geodesic deviations within a general relativistic setting, without using Newtonian and post-Newtonian approximations. We apply this method to the problem of closed orbital motion of test particles in the Kerr metric spacetime. With a simple circular orbit in the equatorial plane taken as the initial geodesic, we obtain finite eccentricity orbits in the form of Taylor series with the eccentricity playing the role of a small parameter. The explicit expressions of these higher-order geodesic deviations are derived using successive systems of linear equations with constant coefficients, whose solutions are of harmonic oscillator type. This scheme gives best results when applied to orbits with low eccentricities, but with arbitrary possible values of (GM/Rc sup 2).
Lipschitz Metrics for a Class of Nonlinear Wave Equations
Bressan, Alberto; Chen, Geng
2017-12-01
The nonlinear wave equation {u_{tt}-c(u)(c(u)u_x)_x=0} determines a flow of conservative solutions taking values in the space {H^1(R)}. However, this flow is not continuous with respect to the natural H 1 distance. The aim of this paper is to construct a new metric which renders the flow uniformly Lipschitz continuous on bounded subsets of {H^1(R)}. For this purpose, H 1 is given the structure of a Finsler manifold, where the norm of tangent vectors is defined in terms of an optimal transportation problem. For paths of piecewise smooth solutions, one can carefully estimate how the weighted length grows in time. By the generic regularity result proved in [7], these piecewise regular paths are dense and can be used to construct a geodesic distance with the desired Lipschitz property.
A convergence theory for probabilistic metric spaces | Jäger ...
African Journals Online (AJOL)
We develop a theory of probabilistic convergence spaces based on Tardiff's neighbourhood systems for probabilistic metric spaces. We show that the resulting category is a topological universe and we characterize a subcategory that is isomorphic to the category of probabilistic metric spaces. Keywords: Probabilistic metric ...
Understanding Acceptance of Software Metrics--A Developer Perspective
Umarji, Medha
2009-01-01
Software metrics are measures of software products and processes. Metrics are widely used by software organizations to help manage projects, improve product quality and increase efficiency of the software development process. However, metrics programs tend to have a high failure rate in organizations, and developer pushback is one of the sources…
Modified intuitionistic fuzzy metric spaces and some fixed point theorems
International Nuclear Information System (INIS)
Saadati, R.; Sedghi, S.; Shobe, N.
2008-01-01
Since the intuitionistic fuzzy metric space has extra conditions (see [Gregori V, Romaguera S, Veereamani P. A note on intuitionistic fuzzy metric spaces. Chaos, Solitons and Fractals 2006;28:902-5]). In this paper, we consider modified intuitionistic fuzzy metric spaces and prove some fixed point theorems in these spaces. All the results presented in this paper are new
Tide or Tsunami? The Impact of Metrics on Scholarly Research
Bonnell, Andrew G.
2016-01-01
Australian universities are increasingly resorting to the use of journal metrics such as impact factors and ranking lists in appraisal and promotion processes, and are starting to set quantitative "performance expectations" which make use of such journal-based metrics. The widespread use and misuse of research metrics is leading to…
Robustness of climate metrics under climate policy ambiguity
International Nuclear Information System (INIS)
Ekholm, Tommi; Lindroos, Tomi J.; Savolainen, Ilkka
2013-01-01
Highlights: • We assess the economic impacts of using different climate metrics. • The setting is cost-efficient scenarios for three interpretations of the 2C target. • With each target setting, the optimal metric is different. • Therefore policy ambiguity prevents the selection of an optimal metric. • Robust metric values that perform well with multiple policy targets however exist. -- Abstract: A wide array of alternatives has been proposed as the common metrics with which to compare the climate impacts of different emission types. Different physical and economic metrics and their parameterizations give diverse weights between e.g. CH 4 and CO 2 , and fixing the metric from one perspective makes it sub-optimal from another. As the aims of global climate policy involve some degree of ambiguity, it is not possible to determine a metric that would be optimal and consistent with all policy aims. This paper evaluates the cost implications of using predetermined metrics in cost-efficient mitigation scenarios. Three formulations of the 2 °C target, including both deterministic and stochastic approaches, shared a wide range of metric values for CH 4 with which the mitigation costs are only slightly above the cost-optimal levels. Therefore, although ambiguity in current policy might prevent us from selecting an optimal metric, it can be possible to select robust metric values that perform well with multiple policy targets
Graev metrics on free products and HNN extensions
DEFF Research Database (Denmark)
Slutsky, Konstantin
2014-01-01
We give a construction of two-sided invariant metrics on free products (possibly with amalgamation) of groups with two-sided invariant metrics and, under certain conditions, on HNN extensions of such groups. Our approach is similar to the Graev's construction of metrics on free groups over pointed...
The universal connection and metrics on moduli spaces
International Nuclear Information System (INIS)
Massamba, Fortune; Thompson, George
2003-11-01
We introduce a class of metrics on gauge theoretic moduli spaces. These metrics are made out of the universal matrix that appears in the universal connection construction of M. S. Narasimhan and S. Ramanan. As an example we construct metrics on the c 2 = 1 SU(2) moduli space of instantons on R 4 for various universal matrices. (author)
ST-intuitionistic fuzzy metric space with properties
Arora, Sahil; Kumar, Tanuj
2017-07-01
In this paper, we define ST-intuitionistic fuzzy metric space and the notion of convergence and completeness properties of cauchy sequences is studied. Further, we prove some properties of ST-intuitionistic fuzzy metric space. Finally, we introduce the concept of symmetric ST Intuitionistic Fuzzy metric space.
Term Based Comparison Metrics for Controlled and Uncontrolled Indexing Languages
Good, B. M.; Tennis, J. T.
2009-01-01
Introduction: We define a collection of metrics for describing and comparing sets of terms in controlled and uncontrolled indexing languages and then show how these metrics can be used to characterize a set of languages spanning folksonomies, ontologies and thesauri. Method: Metrics for term set characterization and comparison were identified and…
Otherwise Engaged : Social Media from Vanity Metrics to Critical Analytics
Rogers, R.
2018-01-01
Vanity metrics is a term that captures the measurement and display of how well one is doing in the “success theater” of social media. The notion of vanity metrics implies a critique of metrics concerning both the object of measurement as well as their capacity to measure unobtrusively or only to
Meter Detection in Symbolic Music Using Inner Metric Analysis
de Haas, W.B.; Volk, A.
2016-01-01
In this paper we present PRIMA: a new model tailored to symbolic music that detects the meter and the first downbeat position of a piece. Given onset data, the metrical structure of a piece is interpreted using the Inner Metric Analysis (IMA) model. IMA identifies the strong and weak metrical
Regional Sustainability: The San Luis Basin Metrics Project
There are a number of established, scientifically supported metrics of sustainability. Many of the metrics are data intensive and require extensive effort to collect data and compute. Moreover, individual metrics may not capture all aspects of a system that are relevant to sust...
Idris, Husni; Shen, Ni; Wing, David J.
2011-01-01
The growing demand for air travel is increasing the need for mitigating air traffic congestion and complexity problems, which are already at high levels. At the same time new surveillance, navigation, and communication technologies are enabling major transformations in the air traffic management system, including net-based information sharing and collaboration, performance-based access to airspace resources, and trajectory-based rather than clearance-based operations. The new system will feature different schemes for allocating tasks and responsibilities between the ground and airborne agents and between the human and automation, with potential capacity and cost benefits. Therefore, complexity management requires new metrics and methods that can support these new schemes. This paper presents metrics and methods for preserving trajectory flexibility that have been proposed to support a trajectory-based approach for complexity management by airborne or ground-based systems. It presents extensions to these metrics as well as to the initial research conducted to investigate the hypothesis that using these metrics to guide user and service provider actions will naturally mitigate traffic complexity. The analysis showed promising results in that: (1) Trajectory flexibility preservation mitigated traffic complexity as indicated by inducing self-organization in the traffic patterns and lowering traffic complexity indicators such as dynamic density and traffic entropy. (2)Trajectory flexibility preservation reduced the potential for secondary conflicts in separation assurance. (3) Trajectory flexibility metrics showed potential application to support user and service provider negotiations for minimizing the constraints imposed on trajectories without jeopardizing their objectives.
Information-theoretic semi-supervised metric learning via entropy regularization.
Niu, Gang; Dai, Bo; Yamada, Makoto; Sugiyama, Masashi
2014-08-01
We propose a general information-theoretic approach to semi-supervised metric learning called SERAPH (SEmi-supervised metRic leArning Paradigm with Hypersparsity) that does not rely on the manifold assumption. Given the probability parameterized by a Mahalanobis distance, we maximize its entropy on labeled data and minimize its entropy on unlabeled data following entropy regularization. For metric learning, entropy regularization improves manifold regularization by considering the dissimilarity information of unlabeled data in the unsupervised part, and hence it allows the supervised and unsupervised parts to be integrated in a natural and meaningful way. Moreover, we regularize SERAPH by trace-norm regularization to encourage low-dimensional projections associated with the distance metric. The nonconvex optimization problem of SERAPH could be solved efficiently and stably by either a gradient projection algorithm or an EM-like iterative algorithm whose M-step is convex. Experiments demonstrate that SERAPH compares favorably with many well-known metric learning methods, and the learned Mahalanobis distance possesses high discriminability even under noisy environments.
Nonlinear realizations and effective Lagrangian densities for nonlinear σ-models
International Nuclear Information System (INIS)
Hamilton-Charlton, Jason Dominic
2003-01-01
Nonlinear realizations of the groups SU(N), SO(m) and SO(t,s) are analysed, described by the coset spaces SU(N) / SU(N-1) x U(1), SO(m) / SO(m-1), SO(1,m-1) / SO(1,m-2) and SO(m) / SO(m-2 x SO(2). The analysis consists of determining the transformation properties of the Goldstone Bosons, constructing the most general possible Lagrangian for the realizations, and as a result identifying the coset space metric. We view the λ matrices of SU(N) as being the basis of an (N 2 - 1) dimensional real vector space, and from this we learn how to construct the basis of a Cartan Subspace associated with a vector. This results in a mathematical structure which allows us to find expressions for coset representative elements used in the analysis. This structure is not only relevant to SU(N) breaking models, but may also be used to find results in SO(m) and SO(1,m - 1) breaking models. (author)
Directory of Open Access Journals (Sweden)
V. N. Nagornov
2008-01-01
Full Text Available The paper contains information on the basic directions of an investment activity in the power generation sector of the Republic of Belarus and importance of the realization of planned actions at the present moment. The main sources for financing modernization of basic production funds of the Belarusian power generation system have been analyzed in the paper. The paper describes general problems and difficulties that the power industry is facing while realizing investment projects. The most important problem is a formation of sources for complete project financing due to sharp price rise for imported power resources. The paper considers various approaches to provision of the required sources for financing investment activity in the power sector. The paper shows the need for a tariff policy reform, which is to be aimed, first of all, at the reduction of the cross subsidizing in power tariffs.
Directory of Open Access Journals (Sweden)
Олег Александрович КУЧМА
2016-03-01
Full Text Available The authors consider the modeling of organizational structures by virtue of interaction between the basic participants by realizing of investment construction projects. This process is directed at the complex analysis of a problem of quality management by creating of building goods taking into account modern project management tendencies. The topicality of problem is obvious as by realizing of investment construction projects there is a liberal share of uncompleted projects, and in the completed projects actual values considerably exceed budgeted capital expenditures. The introduced model allows managing the project per quality system in all phases of the investment construction project‘s life cycle. It promotes refinement of building goods, improves the rate of successfully completed projects with actual values near budgeted.
Extremal limits of the C metric: Nariai, Bertotti-Robinson, and anti-Nariai C metrics
International Nuclear Information System (INIS)
Dias, Oscar J.C.; Lemos, Jose P.S.
2003-01-01
In two previous papers we have analyzed the C metric in a background with a cosmological constant Λ, namely, the de-Sitter (dS) C metric (Λ>0), and the anti-de Sitter (AdS) C metric (Λ 0, Λ=0, and Λ 2 xS-tilde 2 ) to each point in the deformed two-sphere S-tilde 2 corresponds a dS 2 spacetime, except for one point which corresponds to a dS 2 spacetime with an infinite straight strut or string. There are other important new features that appear. One expects that the solutions found in this paper are unstable and decay into a slightly nonextreme black hole pair accelerated by a strut or by strings. Moreover, the Euclidean version of these solutions mediate the quantum process of black hole pair creation that accompanies the decay of the dS and AdS spaces
Massless and massive quanta resulting from a mediumlike metric tensor
International Nuclear Information System (INIS)
Soln, J.
1985-01-01
A simple model of the ''primordial'' scalar field theory is presented in which the metric tensor is a generalization of the metric tensor from electrodynamics in a medium. The radiation signal corresponding to the scalar field propagates with a velocity that is generally less than c. This signal can be associated simultaneously with imaginary and real effective (momentum-dependent) masses. The requirement that the imaginary effective mass vanishes, which we take to be the prerequisite for the vacuumlike signal propagation, leads to the ''spontaneous'' splitting of the metric tensor into two distinct metric tensors: one metric tensor gives rise to masslesslike radiation and the other to a massive particle. (author)
Principle of space existence and De Sitter metric
International Nuclear Information System (INIS)
Mal'tsev, V.K.
1990-01-01
The selection principle for the solutions of the Einstein equations suggested in a series of papers implies the existence of space (g ik ≠ 0) only in the presence of matter (T ik ≠0). This selection principle (principle of space existence, in the Markov terminology) implies, in the general case, the absence of the cosmological solution with the De Sitter metric. On the other hand, the De Sitter metric is necessary for describing both inflation and deflation periods of the Universe. It is shown that the De Sitter metric is also allowed by the selection principle under discussion if the metric experiences the evolution into the Friedmann metric
Pragmatic security metrics applying metametrics to information security
Brotby, W Krag
2013-01-01
Other books on information security metrics discuss number theory and statistics in academic terms. Light on mathematics and heavy on utility, PRAGMATIC Security Metrics: Applying Metametrics to Information Security breaks the mold. This is the ultimate how-to-do-it guide for security metrics.Packed with time-saving tips, the book offers easy-to-follow guidance for those struggling with security metrics. Step by step, it clearly explains how to specify, develop, use, and maintain an information security measurement system (a comprehensive suite of metrics) to
An architecture design and realization of the industrial CT visualization system
International Nuclear Information System (INIS)
Gao Long; Li Zheng; Zhang Li; Gao Wenhuan; Kang Kejun
2003-01-01
The Industrial Computer Tomography (ICT) is an ideal and powerful technique for inspecting and evaluating the integrity of many large and complex structures. Three dimension visualization system is the main component of ICT inspection. This paper gives an architecture design and the realization of ICT visualization system on the basis of the system analysis. A new adaptive precision algorithm is brought out to solve the main problem of interactive speed. The paper also discussed the future research intention
General formalism of Hamiltonians for realizing a prescribed evolution of a qubit
International Nuclear Information System (INIS)
Tong, D.M.; Chen, J.-L.; Lai, C.H.; Oh, C.H.; Kwek, L.C.
2003-01-01
We investigate the inverse problem concerning the evolution of a qubit system, specifically we consider how one can establish the Hamiltonians that account for the evolution of a qubit along a prescribed path in the projected Hilbert space. For a given path, there are infinite Hamiltonians which can realize the same evolution. A general form of the Hamiltonians is constructed in which one may select the desired one for implementing a prescribed evolution. This scheme can be generalized to higher dimensional systems
Interpreting Poetic Inquiry: Authenticity Realized from Alumni Performers' Narratives
Baker, J. Scott
2017-01-01
In the fall of 2015, the author conducted a national survey of over 1,000 former high school speech and debate competitors. As he told a colleague, he was drowning in data. It was a good problem to have, but he was not sure how to thoroughly examine the heart of data; how would he make meaning of their experiences? Then, he realized, the answer…
Classification in medical images using adaptive metric k-NN
Chen, C.; Chernoff, K.; Karemore, G.; Lo, P.; Nielsen, M.; Lauze, F.
2010-03-01
The performance of the k-nearest neighborhoods (k-NN) classifier is highly dependent on the distance metric used to identify the k nearest neighbors of the query points. The standard Euclidean distance is commonly used in practice. This paper investigates the performance of k-NN classifier with respect to different adaptive metrics in the context of medical imaging. We propose using adaptive metrics such that the structure of the data is better described, introducing some unsupervised learning knowledge in k-NN. We investigated four different metrics are estimated: a theoretical metric based on the assumption that images are drawn from Brownian Image Model (BIM), the normalized metric based on variance of the data, the empirical metric is based on the empirical covariance matrix of the unlabeled data, and an optimized metric obtained by minimizing the classification error. The spectral structure of the empirical covariance also leads to Principal Component Analysis (PCA) performed on it which results the subspace metrics. The metrics are evaluated on two data sets: lateral X-rays of the lumbar aortic/spine region, where we use k-NN for performing abdominal aorta calcification detection; and mammograms, where we use k-NN for breast cancer risk assessment. The results show that appropriate choice of metric can improve classification.
THE ROLE OF ARTICLE LEVEL METRICS IN SCIENTIFIC PUBLISHING
Directory of Open Access Journals (Sweden)
Vladimir TRAJKOVSKI
2016-04-01
Full Text Available Emerging metrics based on article-level does not exclude traditional metrics based on citations to the journal, but complements them. Article-level metrics (ALMs provide a wide range of metrics about the uptake of an individual journal article by the scientific community after publication. They include citations, statistics of usage, discussions in online comments and social media, social bookmarking, and recommendations. In this editorial, the role of article level metrics in publishing scientific papers has been described. Article-Level Metrics (ALMs are rapidly emerging as important tools to quantify how individual articles are being discussed, shared, and used. Data sources depend on the tool, but they include classic metrics indicators depending on citations, academic social networks (Mendeley, CiteULike, Delicious and social media (Facebook, Twitter, blogs, and Youtube. The most popular tools used to apply this new metrics are: Public Library of Science - Article-Level Metrics, Altmetric, Impactstory and Plum Analytics. Journal Impact Factor (JIF does not consider impact or influence beyond citations count as this count reflected only through Thomson Reuters’ Web of Science® database. JIF provides indicator related to the journal, but not related to a published paper. Thus, altmetrics now becomes an alternative metrics for performance assessment of individual scientists and their contributed scholarly publications. Macedonian scholarly publishers have to work on implementing of article level metrics in their e-journals. It is the way to increase their visibility and impact in the world of science.
Kim, David D; Basu, Anirban
2017-11-01
Cost-effectiveness analysis (CEA) methods fail to acknowledge that where cost-effectiveness differs across subgroups, there may be differential adoption of technology. Also, current CEA methods are not amenable to incorporating the impact of policy alternatives that potentially influence the adoption behavior. Unless CEA methods are extended to allow for a comparison of policies rather than simply treatments, their usefulness to decision makers may be limited. We conceptualize new metrics, which estimate the realized value of technology from policy alternatives, through introducing subgroup-specific adoption parameters into existing metrics, incremental cost-effectiveness ratios (ICERs) and Incremental Net Monetary Benefits (NMBs). We also provide the Loss with respect to Efficient Diffusion (LED) metrics, which link with existing value of information metrics but take a policy evaluation perspective. We illustrate these metrics using policies on treatment with combination therapy with a statin plus a fibrate v. statin monotherapy for patients with diabetes and mixed dyslipidemia. Under the traditional approach, the population-level ICER of combination v. monotherapy was $46,000/QALY. However, after accounting for differential rates of adoption of the combination therapy (7.2% among males and 4.3% among females), the modified ICER was $41,733/QALY, due to the higher rate of adoption in the more cost-effective subgroup (male). The LED metrics showed that an education program to increase the uptake of combination therapy among males would provide the largest economic returns due to the significant underutilization of the combination therapy among males under the current policy. This framework may have the potential to improve the decision-making process by producing metrics that are better aligned with the specific policy decisions under consideration for a specific technology.
Outsourced Similarity Search on Metric Data Assets
DEFF Research Database (Denmark)
Yiu, Man Lung; Assent, Ira; Jensen, Christian S.
2012-01-01
. Outsourcing offers the data owner scalability and a low initial investment. The need for privacy may be due to the data being sensitive (e.g., in medicine), valuable (e.g., in astronomy), or otherwise confidential. Given this setting, the paper presents techniques that transform the data prior to supplying......This paper considers a cloud computing setting in which similarity querying of metric data is outsourced to a service provider. The data is to be revealed only to trusted users, not to the service provider or anyone else. Users query the server for the most similar data objects to a query example...
New Metrics from a Fractional Gravitational Field
International Nuclear Information System (INIS)
El-Nabulsi, Rami Ahmad
2017-01-01
Agop et al. proved in Commun. Theor. Phys. (2008) that, a Reissner–Nordstrom type metric is obtained, if gauge gravitational field in a fractal spacetime is constructed by means of concepts of scale relativity. We prove in this short communication that similar result is obtained if gravity in D-spacetime dimensions is fractionalized by means of the Glaeske–Kilbas–Saigo fractional. Besides, non-singular gravitational fields are obtained without using extra-dimensions. We present few examples to show that these gravitational fields hold a number of motivating features in spacetime physics. (paper)