50 CFR Table 3 to Part 679 - Product Recovery Rates for Groundfish Species and Conversion Rates for Pacific Halibut

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Product Recovery Rates for Groundfish Species and Conversion Rates for Pacific Halibut 3 Table 3 to Part 679 Wildlife and Fisheries FISHERY... Rates for Groundfish Species and Conversion Rates for Pacific Halibut ER28JA02.074 ER10JY02.000 ER28JA02...

SU-F-BRD-15: The Impact of Dose Calculation Algorithm and Hounsfield Units Conversion Tables On Plan Dosimetry for Lung SBRT

Energy Technology Data Exchange (ETDEWEB)

Kuo, L; Yorke, E; Lim, S; Mechalakos, J; Rimner, A [Memorial Sloan-Kettering Cancer Center, NY, NY (United States)

2014-06-15

Purpose: To assess dosimetric differences in IMRT lung stereotactic body radiotherapy (SBRT) plans calculated with Varian AAA and Acuros (AXB) and with vendor-supplied (V) versus in-house (IH) measured Hounsfield units (HU) to mass and HU to electron density conversion tables. Methods: In-house conversion tables were measured using Gammex 472 density-plug phantom. IMRT plans (6 MV, Varian TrueBeam, 6–9 coplanar fields) meeting departmental coverage and normal tissue constraints were retrospectively generated for 10 lung SBRT cases using Eclipse Vn 10.0.28 AAA with in-house tables (AAA/IH). Using these monitor units and MLC sequences, plans were recalculated with AAA and vendor tables (AAA/V) and with AXB with both tables (AXB/IH and AXB/V). Ratios to corresponding AAA/IH values were calculated for PTV D95, D01, D99, mean-dose, total and ipsilateral lung V20 and chestwall V30. Statistical significance of differences was judged by Wilcoxon Signed Rank Test (p<0.05). Results: For HU<−400 the vendor HU-mass density table was notably below the IH table. PTV D95 ratios to AAA/IH, averaged over all patients, are 0.963±0.073 (p=0.508), 0.914±0.126 (p=0.011), and 0.998±0.001 (p=0.005) for AXB/IH, AXB/V and AAA/V respectively. Total lung V20 ratios are 1.006±0.046 (p=0.386), 0.975±0.080 (p=0.514) and 0.998±0.002 (p=0.007); ipsilateral lung V20 ratios are 1.008±0.041(p=0.284), 0.977±0.076 (p=0.443), and 0.998±0.018 (p=0.005) for AXB/IH, AXB/V and AAA/V respectively. In 7 cases, ratios to AAA/IH were within ± 5% for all indices studied. For 3 cases characterized by very low lung density and small PTV (19.99±8.09 c.c.), PTV D95 ratio for AXB/V ranged from 67.4% to 85.9%, AXB/IH D95 ratio ranged from 81.6% to 93.4%; there were large differences in other studied indices. Conclusion: For AXB users, careful attention to HU conversion tables is important, as they can significantly impact AXB (but not AAA) lung SBRT plans. Algorithm selection is also important for

Hounsfield units variations: impact on CT-density based conversion tables and their effects on dose distribution.

Science.gov (United States)

Zurl, B; Tiefling, R; Winkler, P; Kindl, P; Kapp, K S

2014-01-01

Determination of dose error margins in radiation therapy planning due to variations in Hounsfield Units (HU) values dependent on the use of different CT scanning protocols. Based on a series of different CT scanning protocols used in clinical practice, conversion tables for radiation dose calculations were generated and subsequently tested on a phantom. These tables were then used to recalculate the radiation therapy plans of 28 real patients after an incorrect scanning protocol had inadvertently been used for these patients. Different CT parameter settings resulted in errors of HU values of up to 2.6% for densities of 1.1 g/cm(3). The largest errors were associated with changes in the tube voltage. Tests on a virtual water phantom with layers of variable thickness and density revealed a sawtooth-shaped curve for the increase of dose differences from 0.3 to 0.6% and 1.5% at layer thicknesses of 1, 3, and 7 cm, respectively. Use of a beam hardening filter resulted in a reference dose difference of 0.6% in response to a density change of 5%. The recalculation of data from 28 patients who received radiation therapy to the head revealed an overdose of 1.3 ± 0.4% to the bone and 0.7 ± 0.1% to brain tissue. On average, therefore, one monitor unit (range 0-3 MU) per 100 MU more than the correct dose had been given. Use of different CT scanning protocols leads to variations of up to 20% in the HU values. This can result in a mean systematic dose error of 1.5%. Specific conversion tables and automatic CT scanning protocol recognition could reduce dose errors of these types.

Analysis of internal conversion coefficients

International Nuclear Information System (INIS)

Coursol, N.; Gorozhankin, V.M.; Yakushev, E.A.; Briancon, C.; Vylov, Ts.

2000-01-01

An extensive database has been assembled that contains the three most widely used sets of calculated internal conversion coefficients (ICC): [Hager R.S., Seltzer E.C., 1968. Internal conversion tables. K-, L-, M-shell Conversion coefficients for Z=30 to Z=103, Nucl. Data Tables A4, 1-237; Band I.M., Trzhaskovskaya M.B., 1978. Tables of gamma-ray internal conversion coefficients for the K-, L- and M-shells, 10≤Z≤104, Special Report of Leningrad Nuclear Physics Institute; Roesel F., Fries H.M., Alder K., Pauli H.C., 1978. Internal conversion coefficients for all atomic shells, At. Data Nucl. Data Tables 21, 91-289] and also includes new Dirac-Fock calculations [Band I.M. and Trzhaskovskaya M.B., 1993. Internal conversion coefficients for low-energy nuclear transitions, At. Data Nucl. Data Tables 55, 43-61]. This database is linked to a computer program to plot ICCs and their combinations (sums and ratios) as a function of Z and energy, as well as relative deviations of ICC or their combinations for any pair of tabulated data. Examples of these analyses are presented for the K-shell and total ICCs of the gamma-ray standards [Hansen H.H., 1985. Evaluation of K-shell and total internal conversion coefficients for some selected nuclear transitions, Eur. Appl. Res. Rept. Nucl. Sci. Tech. 11.6 (4) 777-816] and for the K-shell and total ICCs of high multipolarity transitions (total, K-, L-, M-shells of E3 and M3 and K-shell of M4). Experimental data sets are also compared with the theoretical values of these specific calculations

Hermitian-Einstein metrics on parabolic stable bundles

International Nuclear Information System (INIS)

Li Jiayu; Narasimhan, M.S.

1995-12-01

Let M-bar be a compact complex manifold of complex dimension two with a smooth Kaehler metric and D a smooth divisor on M-bar. If E is a rank 2 holomorphic vector bundle on M-bar with a stable parabolic structure along D, we prove the existence of a metric on E' = E module MbarD (compatible with the parabolic structure) which is Hermitian-Einstein with respect to the restriction of Kaehler metric of M-barD. A converse is also proved. (author). 24 refs

Conversion of Goldstone bosons into gravitons in anisotropic cosmology

International Nuclear Information System (INIS)

Harari, D.D.; Mazzitelli, F.D.

1990-01-01

The gravitational chiral anomaly makes possible the conversion of a Goldstone boson into a graviton in a background gravitational field. We show that the interaction Lagrangian for this process does not vanish if and only if the background metric has a nonvanishing Weyl tensor, i.e., if it is not conformally flat. No conversion takes place in an isotropic expanding universe. We evaluate the probability for the conversion of Goldstone bosons into gravitons in Bianchi type-I background metrics, the simplest anisotropic cosmological backgrounds

Metrication: An economic wake-up call for US industry

Science.gov (United States)

Carver, G. P.

1993-03-01

As the international standard of measurement, the metric system is one key to success in the global marketplace. International standards have become an important factor in international economic competition. Non-metric products are becoming increasingly unacceptable in world markets that favor metric products. Procurement is the primary federal tool for encouraging and helping U.S. industry to convert voluntarily to the metric system. Besides the perceived unwillingness of the customer, certain regulatory language, and certain legal definitions in some states, there are no major impediments to conversion of the remaining non-metric industries to metric usage. Instead, there are good reasons for changing, including an opportunity to rethink many industry standards and to take advantage of size standardization. Also, when the remaining industries adopt the metric system, they will come into conformance with federal agencies engaged in similar activities.

Language Games: University Responses to Ranking Metrics

Science.gov (United States)

Heffernan, Troy A.; Heffernan, Amanda

2018-01-01

League tables of universities that measure performance in various ways are now commonplace, with numerous bodies providing their own rankings of how institutions throughout the world are seen to be performing on a range of metrics. This paper uses Lyotard's notion of language games to theorise that universities are regaining some power over being…

Office Skills: Metric Problems in the Typing Classroom

Science.gov (United States)

Panagoplos, Nicholas A.

1978-01-01

Discusses problems of metric conversion in the typewriting classroom, as most typewriters have spacing in inches, and shows how to teach students to adjust their typewritten work for this spacing. (MF)

A composite efficiency metrics for evaluation of resource and energy utilization

International Nuclear Information System (INIS)

Yang, Siyu; Yang, Qingchun; Qian, Yu

2013-01-01

Polygeneration systems are commonly found in chemical and energy industry. These systems often involve chemical conversions and energy conversions. Studies of these systems are interdisciplinary, mainly involving fields of chemical engineering, energy engineering, environmental science, and economics. Each of these fields has developed an isolated index system different from the others. Analyses of polygeneration systems are therefore very likely to provide bias results with only the indexes from one field. This paper is motivated from this problem to develop a new composite efficiency metrics for polygeneration systems. This new metrics is based on the second law of thermodynamics, exergy theory. We introduce exergy cost for waste treatment as the energy penalty into conventional exergy efficiency. Using this new metrics could avoid the situation of spending too much energy for increasing production or paying production capacity for saving energy consumption. The composite metrics is studied on a simplified co-production process, syngas to methanol and electricity. The advantage of the new efficiency metrics is manifested by comparison with carbon element efficiency, energy efficiency, and exergy efficiency. Results show that the new metrics could give more rational analysis than the other indexes. - Highlights: • The composite efficiency metric gives the balanced evaluation of resource utilization and energy utilization. • This efficiency uses the exergy for waste treatment as the energy penalty. • This efficiency is applied on a simplified co-production process. • Results show that the composite metrics is better than energy efficiencies and resource efficiencies

A Report to the Nation on the Management of Metric Implementation.

Science.gov (United States)

Perica, Lou, Ed.

The progress toward United States conversion to the metric system is the major focus of this publication. The status of Federal legislation and the influence of anti-trust laws on this legislation are discussed. Metric implementation by industry is surveyed with respect to several industries: automobile, aerospace, tooling, building and…

Comparative table of various energy sources

Energy Technology Data Exchange (ETDEWEB)

1976-08-01

This table provides wide informations on the technological facets of various sources of primary energy. One of the outstanding features of this table is that it exposes and compares various technological problems involved in the energy conversion processes. The primary energy sources treated here are the solar energy (heat and light are treated separately), the geothermal energy, coal (gasification and liquefaction are treated separately), oil, natural gas, oceano-energy (tidal energy, temperature difference, and wave energy are treated separately), organic wastes, oil shale, tar sand, hydraulic power, wind power, biomass, uranium, thorium, and deuterium and lithium. On the other hand, the comparisons are made in three major items, i.e. charactersitics as natural resources, conversion or refinement to secondary energy sources, and economical characteristics. The first item includes the estimated and recognized amount of deposits, easiness of mining, storage, and transportation, and cleanliness and safety. As for conversion characteristics, the easiness, controlability, efficiency, cleanliness, and safety of various conversion processes are compared. Finally, as for economical problems, cost comparisons are made for gathering or mining those resources, including required energy input, man power, required facilities, and site conditions.

A Practitioners’ Perspective on Developmental Models, Metrics and Community

Directory of Open Access Journals (Sweden)

Chad Stewart

2009-12-01

Full Text Available This article builds on a paper by Stein and Heikkinen (2009, and suggestsways to expand and improve our measurement of the quality of the developmentalmodels, metrics and instruments and the results we get in collaborating with clients. Wesuggest that this dialogue needs to be about more than stage development measured by(even calibrated stage development-focused, linguistic-based, developmental psychologymetrics that produce lead indicators and are shown to be reliable and valid bypsychometric qualities alone. The article first provides a brief overview of ourbackground and biases, and an applied version of Ken Wilber’s Integral OperatingSystem that has provided increased development, client satisfaction, and contribution toour communities measured by verifiable, tangible results (as well as intangible resultssuch as increased ability to cope with complex surroundings, reduced stress and growthin developmental stages to better fit to the environment in which our clients wereengaged at that time. It then addresses four key points raised by Stein and Heikkinen(need for quality control, defining and deciding on appropriate metrics, building a systemto evaluate models and metrics, and clarifying and increasing the reliability and validityof the models and metrics we use by providing initial concrete steps to:• Adopt a systemic value-chain approach• Measure results in addition to language• Build on the evaluation system for instruments, models and metrics suggested byStein & Heikkinen• Clarify and improve the reliability and validity of the instruments, models andmetrics we useWe complete the article with an echoing call for the community of AppliedDevelopmental Theory suggested by Ross (2008 and Stein and Heikkinen, a briefdescription of that community (from our perspective, and a table that builds on Table 2proposed by Stein and Heikkinen.

Digital Interface Modules for Active-Readout X-Ray Spectrometer.

Science.gov (United States)

1985-03-01

x - ray sensitivity. The x - ray absorption coefficients tabulated by McMasters , et al...provides x - ray spectrographic data with all instrument response factors removed. v %, . % CONVERSION TABLE CONVERSION FACTORS FOR U.S. CUSTOMARY TO METRIC...LLNL document UCRL-50174) have been used to calculate the values of TKIM and TBe listed in Tables 1 through 3. The Reticon x - ray sensitivity

A comparative table of various energy sources

International Nuclear Information System (INIS)

Anon.

1976-01-01

This table provides wide informations on the technological facets of various sources of primary energy. One of the outstanding features of this table is that it exposes and compares various technological problems involved in the energy conversion processes. The primary energy sources treated here are the solar energy (heat and light are treated separately), the geothermal energy, coal (gasification and liquefaction are treated separately), oil, natural gas, oceano-energy (tidal energy, temperature difference, and wave energy are treated separately), organic wastes, oil shale, tar sand, hydraulic power, wind power, biomass, uranium, thorium, and deuterium and lithium. On the other hand, the comparisons are made in three major items, i.e. charactersitics as natural resources, conversion or refinement to secondary energy sources, and economical characteristics. The first item includes the estimated and recognized amount of deposits, easiness of mining, storage, and transportation, and cleanliness and safety. As for conversion characteristics, the easiness, controlability, efficiency, cleanliness, and safety of various conversion processes are compared. Finally, as for economical problems, cost comparisons are made for gathering or mining those resources, including required energy input, man power, required facilities, and site conditions. (Aoki, K.)

41 CFR 105-72.205 - Metric system of measurement.

Science.gov (United States)

2010-07-01

... Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION Regional Offices-General Services Administration 72-UNIFORM ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND AGREEMENTS WITH INSTITUTIONS OF HIGHER... system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act...

Advanced reactors: the case for metric design

International Nuclear Information System (INIS)

Ruby, L.

1986-01-01

The author argues that DOE should insist that all design specifications for advanced reactors be in the International System of Units (SI) in accordance with the Metric Conversion Act of 1975. Despite a lack of leadership from the federal government, industry has had to move toward conversion in order to compete on world markets. The US is the only major country without a scheduled conversion program. SI avoids the disadvantages of ambiguous names, non-coherent units, multiple units for the same quantity, multiple definitions, as well as barriers to international exchange and marketing and problems in comparing safety and code parameters. With a first step by DOE, the Nuclear Regulatory Commission should add the same requirements to reactor licensing guidelines. 4 references

Conversion between Addenbrooke's Cognitive Examination III and Mini-Mental State Examination.

Science.gov (United States)

Matías-Guiu, Jordi A; Pytel, Vanesa; Cortés-Martínez, Ana; Valles-Salgado, María; Rognoni, Teresa; Moreno-Ramos, Teresa; Matías-Guiu, Jorge

2017-12-10

We aim to provide a conversion between Addenbrooke's Cognitive Examination III (ACE-III) and Mini-Mental State Examination (MMSE) scores, to predict the MMSE result based on ACE-III, thus avoiding the need for both tests, and improving their comparability. Equipercentile equating method was used to elaborate a conversion table using a group of 400 participants comprising healthy controls and Alzheimer's disease (AD) patients. Then, reliability was assessed in a group of 100 healthy controls and patients with AD, 52 with primary progressive aphasia and 22 with behavioral variant frontotemporal dementia. The conversion table between ACE-III and MMSE denoted a high reliability, with intra-class correlation coefficients of 0.940, 0.922, and 0.902 in the groups of healthy controls and AD, behavioral variant frontotemporal dementia, and primary progressive aphasia, respectively. Our conversion table between ACE-III and MMSE suggests that MMSE may be estimated based on the ACE-III score, which could be useful for clinical and research purposes.

Making of attenuation-correcting computation table for RIs and emitted gamma ray table using MS-Excel

International Nuclear Information System (INIS)

Miura, Shigeyuki; Takahashi, Mitsuyuki; Sato, Isamu

1995-01-01

In the technical workshop of National Institute for Fusion Science in the last year, report was made on the making of attenuation-correcting computation table for R/S by using the software Lotus 1-2-3 on MS-DOS. It was decided to use this table by applying Windows, and further, to partially add some functions to this table. Excel 5.0 was to be used as the software, since Excel seems to be the main of Windows. It was decided to make anew the γ-ray data table which is linked to the radioactivity data in the RI attenuation-correcting computation table. First work is to convert the RI attenuation-correcting computation table made as the file of Lotus 1-2-3 to the file of Excel 5.0 of Windows, and this is very simple. As the result of the file conversion, it was found that the data file became compact. Next work is the addition of functions to this table. The function being added this time is that for judging whether R/S are those which are stipulated in the laws or not from the values of radioactivity calculated by the attenuation correction. The concrete method of this addition of function is explained. The data table on the γ-ray for respective nuclides was made. The present state of the data base on radiation was investigated. (K.I.)

Parametric study for high conversion pebble bed reactor

Energy Technology Data Exchange (ETDEWEB)

Teuchert, E.; Ruetten, H. J.

1975-06-15

Tables are presented of fuel cycle costs, conversion ratios and accompanying variations in fuel element designs for a 3,00 MWth high conversion pebble bed reactor with initial high enriched uranium/thorium cycle and subsequent recycling of U-233, Pu-239 and Pu-241.

Conversion between noise exposure indicators Leq24h, LDay, LEvening, LNight, Ldn and Lden: Principles and practical guidance.

Science.gov (United States)

Brink, Mark; Schäffer, Beat; Pieren, Reto; Wunderli, Jean Marc

2018-01-01

This article presents empirically derived conversion rules between the environmental noise exposure metrics Leq24h, LDay, LEvening, LNight, Ldn, and Lden for the noise sources road, rail and air traffic. It caters to researchers that need to estimate the value of one (unknown) noise metric from the value of another (known) metric, e.g. in the scope of epidemiological meta-analyses or systematic reviews, when results from different studies are pooled and need to be related to one common exposure metric. Conversion terms are derived using two empirical methods a) based on analyzing the diurnal variation of traffic, and b) by analyzing differences between calculated noise exposure metrics. For a) we collected and analyzed diurnal traffic share data from European and US airports as well as data on the diurnal variation of traffic from roads in several European countries and from railway lines in Switzerland which were derived from counting stations and official records. For b) we calculated differences between noise metrics in over 50'000 stratified randomly sampled dwellings in Switzerland. As a result of this exercise, conversion terms, including uncertainty estimates, are systematically tabulated for all variants of the target metrics. Guidance as to the practical applicability of the proposed conversions in different contexts is provided, and limitations of their use are discussed. Copyright © 2017 Elsevier GmbH. All rights reserved.

The global resource balance table, an integrated table of energy, materials and the environment

International Nuclear Information System (INIS)

Tsuchiya, Haruki

2013-01-01

This paper introduces the Global Resource Balance Table (GRBT), which is an extension of the energy balance tables that expresses the relationships between energy, materials and the environment. The material division of the GRBT includes steel, cement, paper, wood and grain. In contrast, the environmental division of the GRBT includes oxygen, CO 2 and methane. The transaction division rows in the GRBT include production, conversion, end use and stock. Each cell of the GRBT contains the quantities of the respective resources that were generated or consumed. The relationships between the cells were constructed from the laws of conservation of the materials and energy. We constructed a GRBT for 2007 and discussed the increasing air temperature due to waste heat and the CO 2 equivalent from human breathing. The GRBT is a comprehensive integrated table that represents the resources that are consumed by human activities and is useful for energy and environmental studies. - Highlights: • We extended energy balance table and introduced Global Resource Balance Table. • It shows relationships between energy, materials and the environment. • The material division includes steel, cement, paper, wood and grain. • The environmental division includes oxygen, CO 2 and methane. • We discussed on waste heat and CO 2 emission by human breathing

The Round Table 03 圆桌: A Conversation with Xu Bing

Directory of Open Access Journals (Sweden)

Madeline Eschenburg

2015-08-01

Full Text Available The following is an excerpt from a conversation between contemporary Chinese artist Xu Bing, Madeline Eschenburg, and Ellen Larson. Xu Bing curated an exhibition at the Central Academy of Fine Arts titled The Second CAFAM Future Exhibition, Observer-Creator: The Reality Representation of Chinese Young Art, on exhibition through March 2015. Our conversation centered around his thoughts on a new generation of young Chinese artists as well as reflection on his own early career and time in New York. The conversation was conducted in Chinese and has been translated into English.

Improved Root Normal Size Distributions for Liquid Atomization

Science.gov (United States)

2015-11-01

ANSI Std. Z39.18 j CONVERSION TABLE Conversion Factors for U.S. Customary to metric (SI) units of measurement. MULTIPLY BY TO...Gray (Gy) coulomb /kilogram (C/kg) second (s) kilogram (kg) kilo pascal (kPa) 1 Improved Root Normal Size Distributions for Liquid

Nuclear analytical chemistry 5. Tables, nomograms and schemes

Energy Technology Data Exchange (ETDEWEB)

Tolgyessy, J; Varga, S; Dillinger, P; Kyrs, M

1976-01-01

Tables, graphs and nomograms are given on aspects of nuclear analytical chemistry. The tables contain data on physical and chemical units and their conversion, exponential functions, the characteristics of radioactive nuclides, data on the interaction of nuclear radiation with matter, data useful in measuring nuclear radiation, in scintillation and semiconductor spectrometry, activation analysis, data on masking reactions of ions in chemical separation, on extraction, ion exchange, accuracy in applying the method of isotope dilution, on radiochemical analysis.

The Wireless Data Acquisition System for the Vibration Table

Science.gov (United States)

Teng, Y. T.; Hu, X.

2014-12-01

The vibration table is a large-scaled tool used for inspecting the performance of seismometers. The output from a seismometer on the table can be directly monitored when the vibration table moves in certain pattern. Compared with other inspection methods, inspecting seismometers' performance indicators (frequency response, degree of linearity, sensitivity, lateral inhibition and dynamic range etc). using vibration tables is more intuitive. Therefore, the vibration tables are an essential testing part in developing new seismometers and seismometer quality control. Whereas, in practice, a cable is needed to connect the seismometer to the ground equipments for its signal outputs and power supply, that means adding a time-varying nonlinear spring between the vibration table and ground. The cable adds nonlinear feature to the table, distorts the table-board movement and bring extra errors to the inspecting work and affected the testing accuracy and precision. In face of this problem, we developed a wireless acquiring system for the vibration table. The system is consisted of a three-channel analog-to-digital conversion, an acquisition control part, local data storage, network interface, wireless router and power management, etc. The analog-to-digital conversion part uses a 24-digit high-precision converter, which has a programmable amplifier at the front end of its artificial circuit, with the function of matching outputs with different amplifier from the vibration table. The acquisition control part uses a 32 bit ARM processor, with low-power dissipation, minute extension and high performance. The application software platform is written in Linux to make the system convenient for multitasking work. Large volume local digital storage is achieved by a 32G SD card, which is used for saving real time acquired data. Data transmission is achieved by network interface and wireless router, which can simplify the application software by the supported TCP/IP protocol. Besides

ABCC-JNIH Adult Health Study, Hiroshima and Nagasaki 1958-1960: height-weight tables

Energy Technology Data Exchange (ETDEWEB)

Seigel, D

1962-11-14

From measurements taken in the Adult Health Study in Nagasaki and Hiroshima, tables of weight have been compiled. They are presented in the metric system, specific for height, sex, and age group. Five percentiles are presented as a guide for describing the distribution of weights. These values represent smoothing of the original data. This was accomplished by fitting second degree regression equations by least squares to the relationship of the logarithm of weight on height, separately for each age-sex group. This provided medians; other percentiles were obtained by adding or subtracting a term of the form KS, where K was taken from a table of normal deviates, and S was estimated from the data. The use and limitations of the tables were discussed. 10 tables.

The Planck Vacuum and the Schwarzschild Metrics

Directory of Open Access Journals (Sweden)

Daywitt W. C.

2009-07-01

Full Text Available The Planck vacuum (PV is assumed to be the source of the visible universe. So under conditions of sufficient stress, there must exist a pathway through which energy from the PV can travel into this universe. Conversely, the passage of energy from the visible universe to the PV must also exist under the same stressful conditions. The following examines two versions of the Schwarzschild metric equation for compatability with this open-pathway idea.

Analysis of Skeletal Muscle Metrics as Predictors of Functional Task Performance

Science.gov (United States)

Ryder, Jeffrey W.; Buxton, Roxanne E.; Redd, Elizabeth; Scott-Pandorf, Melissa; Hackney, Kyle J.; Fiedler, James; Ploutz-Snyder, Robert J.; Bloomberg, Jacob J.; Ploutz-Snyder, Lori L.

2010-01-01

PURPOSE: The ability to predict task performance using physiological performance metrics is vital to ensure that astronauts can execute their jobs safely and effectively. This investigation used a weighted suit to evaluate task performance at various ratios of strength, power, and endurance to body weight. METHODS: Twenty subjects completed muscle performance tests and functional tasks representative of those that would be required of astronauts during planetary exploration (see table for specific tests/tasks). Subjects performed functional tasks while wearing a weighted suit with additional loads ranging from 0-120% of initial body weight. Performance metrics were time to completion for all tasks except hatch opening, which consisted of total work. Task performance metrics were plotted against muscle metrics normalized to "body weight" (subject weight + external load; BW) for each trial. Fractional polynomial regression was used to model the relationship between muscle and task performance. CONCLUSION: LPMIF/BW is the best predictor of performance for predominantly lower-body tasks that are ambulatory and of short duration. LPMIF/BW is a very practical predictor of occupational task performance as it is quick and relatively safe to perform. Accordingly, bench press work best predicts hatch-opening work performance.

VizieR Online Data Catalog: Monochromatic conversion factors to LIR & Mdust (Schreiber+, 2018)

Science.gov (United States)

Schreiber, C.; Elbaz, D.; Pannella, M.; Wang, T.; Ciesla, L.; Franco, M.

2017-10-01

These tables contain conversion factors to translate observed fluxes (Sν) or luminosities (ν*Lν) into total infrared luminosity (LIR) and dust mass (Mdust). The conversion factors are provided for the most commonly used ALMA bands (Band 3 to Band 9) and all JWST MIRI broad bands (F777W to F2550W). These factors are tabulated as a function of redshift. For each conversion factor, the tables also provide the logarithmic uncertainty on the conversion (in dex), which reflects the diversity in spectral shape. These data were calibrated on the deep Spitzer and Herschel observations of the CANDELS fields, as well as early ALMA observations. They are therefore valid for galaxies of masses close to 1010Mȯ and above. (3 data files).

Energy metrics analysis of hybrid - photovoltaic (PV) modules

Energy Technology Data Exchange (ETDEWEB)

Tiwari, Arvind [Department of Electronics and Communication, Krishna Institute of Engineering and Technology, 13 k.m. stone, Ghaziabad - Meerut Road, Ghaziabad 201 206, UP (India); Barnwal, P.; Sandhu, G.S.; Sodha, M.S. [Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110 016 (India)

2009-12-15

In this paper, energy metrics (energy pay back time, electricity production factor and life cycle conversion efficiency) of hybrid photovoltaic (PV) modules have been analyzed and presented for the composite climate of New Delhi, India. For this purpose, it is necessary to calculate (1) the energy consumption in making different components of the PV modules and (2) the annual energy (electrical and thermal) available from the hybrid-PV modules. A set of mathematical relations have been reformulated for computation of the energy metrics. The manufacturing energy, material production energy, energy use and distribution energy of the system have been taken into account, to determine the embodied energy for the hybrid-PV modules. The embodied energy and annual energy outputs have been used for evaluation of the energy metrics. For hybrid PV module, it has been observed that the EPBT gets significantly reduced by taking into account the increase in annual energy availability of the thermal energy in addition to the electrical energy. The values of EPF and LCCE of hybrid PV module become higher as expected. (author)

Automatic Hidden-Web Table Interpretation by Sibling Page Comparison

Science.gov (United States)

Tao, Cui; Embley, David W.

The longstanding problem of automatic table interpretation still illudes us. Its solution would not only be an aid to table processing applications such as large volume table conversion, but would also be an aid in solving related problems such as information extraction and semi-structured data management. In this paper, we offer a conceptual modeling solution for the common special case in which so-called sibling pages are available. The sibling pages we consider are pages on the hidden web, commonly generated from underlying databases. We compare them to identify and connect nonvarying components (category labels) and varying components (data values). We tested our solution using more than 2,000 tables in source pages from three different domains—car advertisements, molecular biology, and geopolitical information. Experimental results show that the system can successfully identify sibling tables, generate structure patterns, interpret tables using the generated patterns, and automatically adjust the structure patterns, if necessary, as it processes a sequence of hidden-web pages. For these activities, the system was able to achieve an overall F-measure of 94.5%.

Coherent and incoherent (μ-, e-) conversion in nuclei

International Nuclear Information System (INIS)

Chiang, H.C.; Oset, E.; Kosmas, T.S.; Faessler, A.; Vergados, J.D.

1993-01-01

Coherent and incoherent (μ - , e - ) conversion in nuclei is studied within the framework of several theories which violate flavour lepton number. A useful approach is followed which allows a factorization of the conversion widths into nuclear factors and other factors which depend only on the elementary process. The nuclear factors are evaluated in a wide range of nuclei allowing simple calculations of the conversion rates throughout the periodic table for a given theory with a minimum of work in the elementary sector. The coherent conversion is found to dominate the process. The results obtained modify appreciable previous results in the literature, particularly in the incoherent process. (orig.)

Critical Business Requirements Model and Metrics for Intranet ROI

OpenAIRE

Luqi; Jacoby, Grant A.

2005-01-01

Journal of Electronic Commerce Research, Vol. 6, No. 1, pp. 1-30. This research provides the first theoretical model, the Intranet Efficiency and Effectiveness Model (IEEM), to measure intranet overall value contributions based on a corporation’s critical business requirements by applying a balanced baseline of metrics and conversion ratios linked to key business processes of knowledge workers, IT managers and business decision makers -- in effect, closing the gap of understanding...

Methodology to Calculate the ACE and HPQ Metrics Used in the Wave Energy Prize

Energy Technology Data Exchange (ETDEWEB)

Driscoll, Frederick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Weber, Jochem W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jenne, Dale S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Thresher, Robert W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Fingersh, Lee J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bull, Dianna [Sandia National Laboratories; Dallman, Ann [Sandia National Laboratories; Gunawan, Budi [Sandia National Laboratories; Ruehl, Kelley [Sandia National Laboratories; Newborn, David [Naval Surface Warfare Center, Carderock Division; Quintero, Miguel [Naval Surface Warfare Center, Carderock Division; LaBonte, Alison [U.S. Department of Energy; Karwat, Darshan [U.S. Department of Energy; Beatty, Scott [Cascadia Coast Research Ltd.

2018-03-08

The U.S. Department of Energy's Wave Energy Prize Competition encouraged the development of innovative deep-water wave energy conversion technologies that at least doubled device performance above the 2014 state of the art. Because levelized cost of energy (LCOE) metrics are challenging to apply equitably to new technologies where significant uncertainty exists in design and operation, the prize technical team developed a reduced metric as proxy for LCOE, which provides an equitable comparison of low technology readiness level wave energy converter (WEC) concepts. The metric is called 'ACE' which is short for the ratio of the average climate capture width to the characteristic capital expenditure. The methodology and application of the ACE metric used to evaluate the performance of the technologies that competed in the Wave Energy Prize are explained in this report.

Energy production, conversion, storage, conservation, and coupling

CERN Document Server

Demirel, Yaşar

2012-01-01

Understanding the sustainable use of energy in various processes is an integral part of engineering and scientific studies, which rely on a sound knowledge of energy systems. Whilst many institutions now offer degrees in energy-related programs, a comprehensive textbook, which introduces and explains sustainable energy systems and can be used across engineering and scientific fields, has been lacking. Energy: Production, Conversion, Storage, Conservation, and Coupling provides the reader with a practical understanding of these five main topic areas of energy including 130 examples and over 600 practice problems. Each chapter contains a range of supporting figures, tables, thermodynamic diagrams and charts, while the Appendix supplies the reader with all the necessary data including the steam tables. This new textbook presents a clear introduction of basic vocabulary, properties, forms, sources, and balances of energy before advancing to the main topic areas of: • Energy production and conversion in importa...

Worldwide Echo-Sounding Correction Tables to Convert to Standard Velocity Depths

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Echo-sounding tables (3rd Edition) were prepared by D.J.T. Carter of the Marine Information and Advisory Service (United Kingdom) for the conversion of raw...

Nuclear data library table (Version November 1998)

International Nuclear Information System (INIS)

Baard, J.H.

1998-11-01

This report presents the edition of the Nuclear Data Library Table, valid from 1998-11-01. This library contains data for conversion of activity values to fluence rate and fluence values. The revised table is a modified version of the older library coded 1990-12-12. The older library has been extended with 23 reaction; the special 'background' reaction has been deleted. A table has been incorporated in this report which indicates the changes in this revised library data in comparison to previously used data. The data has been incorporated in this report which indicates the changes in this revised library data in comparison to previously used data. The data are presented as obtained as output from the program SAPNDLT. A table with half-lives of product nuclides is presented; in Appendix 2 these values have been calculated using the decay constants from this library. Surveys of thermal and fast cross sections are given for the various reactions in Appendix 3 and 4 respectively. Also a table with activities per mg mass for a fluence rate of 10 1 8 m -2 .s -1 is presented in Appendix 3 and 4 respectively. Also a table with activities per mg mass for a fluence rate of 10 1 8 m -1 is presented in Appendix 5 for various irradiation intervals. Appendix 6 gives for the various reactions the Kerma rate value. 8 refs

Sharp metric obstructions for quasi-Einstein metrics

Science.gov (United States)

Case, Jeffrey S.

2013-02-01

Using the tractor calculus to study smooth metric measure spaces, we adapt results of Gover and Nurowski to give sharp metric obstructions to the existence of quasi-Einstein metrics on suitably generic manifolds. We do this by introducing an analogue of the Weyl tractor W to the setting of smooth metric measure spaces. The obstructions we obtain can be realized as tensorial invariants which are polynomial in the Riemann curvature tensor and its divergence. By taking suitable limits of their tensorial forms, we then find obstructions to the existence of static potentials, generalizing to higher dimensions a result of Bartnik and Tod, and to the existence of potentials for gradient Ricci solitons.

Not appropriate dinner table conversation? Talking to children about meat production.

Science.gov (United States)

Bray, Heather J; Zambrano, Sofia C; Chur-Hansen, Anna; Ankeny, Rachel A

2016-05-01

Although Australians on average consume large quantities of meat, their attitudes to farm animal welfare are poorly understood. We know little about how farm animal production is discussed in Australian households or how children learn about the origins of meat. This study consisted of an online survey completed by 225 primary carers throughout Australia recruited through social media. Findings include that conversations about the origin of meat were generally stimulated by meal preparation within the home rather than visits to agricultural shows or similar activities. Parents preferred to initiate conversations with children about meat production before they were 5 years of age. Urban parents were more likely than rural parents to reveal that they were conflicted about eating meat and would be more empathetic to children who chose to stop eating meat. Rural parents were more likely than urban parents to feel that children should eat what they are given and that talking about meat is not a major issue. Both groups felt that it was important that children should know where their food comes from. The findings of this study suggest that parental attitudes to meat production and consumption influence conversations about meat origins with children. Copyright © 2016 Elsevier Ltd. All rights reserved.

texreg: Conversion of Statistical Model Output in R to LATEX and HTML Tables

Directory of Open Access Journals (Sweden)

Philip Leifeld

2013-11-01

Full Text Available A recurrent task in applied statistics is the (mostly manual preparation of model output for inclusion in LATEX, Microsoft Word, or HTML documents usually with more than one model presented in a single table along with several goodness-of-fit statistics. However, statistical models in R have diverse object structures and summary methods, which makes this process cumbersome. This article first develops a set of guidelines for converting statistical model output to LATEX and HTML tables, then assesses to what extent existing packages meet these requirements, and finally presents the texreg package as a solution that meets all of the criteria set out in the beginning. After providing various usage examples, a blueprint for writing custom model extensions is proposed.

Standardized reporting of functioning information on ICF-based common metrics.

Science.gov (United States)

Prodinger, Birgit; Tennant, Alan; Stucki, Gerold

2018-02-01

In clinical practice and research a variety of clinical data collection tools are used to collect information on people's functioning for clinical practice and research and national health information systems. Reporting on ICF-based common metrics enables standardized documentation of functioning information in national health information systems. The objective of this methodological note on applying the ICF in rehabilitation is to demonstrate how to report functioning information collected with a data collection tool on ICF-based common metrics. We first specify the requirements for the standardized reporting of functioning information. Secondly, we introduce the methods needed for transforming functioning data to ICF-based common metrics. Finally, we provide an example. The requirements for standardized reporting are as follows: 1) having a common conceptual framework to enable content comparability between any health information; and 2) a measurement framework so that scores between two or more clinical data collection tools can be directly compared. The methods needed to achieve these requirements are the ICF Linking Rules and the Rasch measurement model. Using data collected incorporating the 36-item Short Form Health Survey (SF-36), the World Health Organization Disability Assessment Schedule 2.0 (WHODAS 2.0), and the Stroke Impact Scale 3.0 (SIS 3.0), the application of the standardized reporting based on common metrics is demonstrated. A subset of items from the three tools linked to common chapters of the ICF (d4 Mobility, d5 Self-care and d6 Domestic life), were entered as "super items" into the Rasch model. Good fit was achieved with no residual local dependency and a unidimensional metric. A transformation table allows for comparison between scales, and between a scale and the reporting common metric. Being able to report functioning information collected with commonly used clinical data collection tools with ICF-based common metrics enables clinicians

$\\eta$-metric structures

OpenAIRE

Gaba, Yaé Ulrich

2017-01-01

In this paper, we discuss recent results about generalized metric spaces and fixed point theory. We introduce the notion of $\\eta$-cone metric spaces, give some topological properties and prove some fixed point theorems for contractive type maps on these spaces. In particular we show that theses $\\eta$-cone metric spaces are natural generalizations of both cone metric spaces and metric type spaces.

Proceedings of the ACM SIGIR Workshop ''Searching Spontaneous Conversational Speech''

NARCIS (Netherlands)

de Jong, Franciska M.G.; Oard, Douglas; Ordelman, Roeland J.F.; Raaijmakers, Stephan

2007-01-01

The Proceedings contain the contributions to the workshop on Searching Spontaneous Conversational Speech organized in conjunction with the 30th ACM SIGIR, Amsterdam 2007. The papers reflect some of the emerging focus areas and cross-cutting research topics, together addressing evaluation metrics,

Learning science in small groups: The relationship of conversation to conceptual understanding

Science.gov (United States)

McDonald, James Tarleton

The purpose of this study was to investigate the relationship between conversation and conceptual understanding of erosion. The objective of this study was to investigate how fifth grade students' conceptions of erosion changed while they used stream tables and worked in groups of four within an inquiry-based curriculum. This study used symbolic interactionism and sociocognitive frameworks to interpret science learning in the elementary classroom. The research focused on the conceptual understanding of the focal group students, their use of classroom discourse to talk about their understandings of erosion, and the expertise that emerged while using stream tables. This study took place over a one-semester long study on erosion. Key informants were eight fifth graders. The data sources consisted of children's journals; transcripts of audiotaped interviews with the key informants before, during, and after the erosion unit; transcripts of videotapes of the students using the stream tables; and field notes recording children's discourse and activity. Individual and group cases were constructed during the study. The knowledge of the eight focal group children was placed on a hierarchy of conceptual understanding that contained 8 components of the erosion process. All four of the students whose ideas were examined in depth gained in their conceptual understanding of erosion. Students' individual expertise enhanced their own conceptual understanding. The contribution of classroom discourse and expertise to conceptual understanding differed between the two focal groups. Group 1 used essential expertise to sustain generative conversations, maximizing their learning opportunities. Students in Group 1 got along with one another, rotated assigned roles and jobs, and were able to start their own generative conversations. Members of Group 1 asked generative questions, connected stream table events to real life situations, and involved everyone in the group. Group 2 engaged in a

An analytical model of the HINT performance metric

Energy Technology Data Exchange (ETDEWEB)

Snell, Q.O.; Gustafson, J.L. [Scalable Computing Lab., Ames, IA (United States)

1996-10-01

The HINT benchmark was developed to provide a broad-spectrum metric for computers and to measure performance over the full range of memory sizes and time scales. We have extended our understanding of why HINT performance curves look the way they do and can now predict the curves using an analytical model based on simple hardware specifications as input parameters. Conversely, by fitting the experimental curves with the analytical model, hardware specifications such as memory performance can be inferred to provide insight into the nature of a given computer system.

Controlled laboratory experiments and modeling of vegetative filter strips with shallow water tables

Science.gov (United States)

Fox, Garey A.; Muñoz-Carpena, Rafael; Purvis, Rebecca A.

2018-01-01

Natural or planted vegetation at the edge of fields or adjacent to streams, also known as vegetative filter strips (VFS), are commonly used as an environmental mitigation practice for runoff pollution and agrochemical spray drift. The VFS position in lowlands near water bodies often implies the presence of a seasonal shallow water table (WT). In spite of its potential importance, there is limited experimental work that systematically studies the effect of shallow WTs on VFS efficacy. Previous research recently coupled a new physically based algorithm describing infiltration into soils bounded by a water table into the VFS numerical overland flow and transport model, VFSMOD, to simulate VFS dynamics under shallow WT conditions. In this study, we tested the performance of the model against laboratory mesoscale data under controlled conditions. A laboratory soil box (1.0 m wide, 2.0 m long, and 0.7 m deep) was used to simulate a VFS and quantify the influence of shallow WTs on runoff. Experiments included planted Bermuda grass on repacked silt loam and sandy loam soils. A series of experiments were performed including a free drainage case (no WT) and a static shallow water table (0.3-0.4 m below ground surface). For each soil type, this research first calibrated VFSMOD to the observed outflow hydrograph for the free drainage experiments to parameterize the soil hydraulic and vegetation parameters, and then evaluated the model based on outflow hydrographs for the shallow WT experiments. This research used several statistical metrics and a new approach based on hypothesis testing of the Nash-Sutcliffe model efficiency coefficient (NSE) to evaluate model performance. The new VFSMOD routines successfully simulated the outflow hydrographs under both free drainage and shallow WT conditions. Statistical metrics considered the model performance valid with greater than 99.5% probability across all scenarios. This research also simulated the shallow water table experiments with

VizieR Online Data Catalog: Flux conversion factors for the Swift/UVOT filters (Brown+, 2016)

Science.gov (United States)

Brown, P. J.; Breeveld, A.; Roming, P. W. A.; Siegel, M.

2016-10-01

The conversion of observed magnitudes (or the actual observed photon or electron count rates) to a flux density is one of the most fundamental calculations. The flux conversions factors for the six Swift/UVOT filters are tabulated in Table1. (1 data file).

NeuronMetrics: software for semi-automated processing of cultured neuron images.

Science.gov (United States)

Narro, Martha L; Yang, Fan; Kraft, Robert; Wenk, Carola; Efrat, Alon; Restifo, Linda L

2007-03-23

Using primary cell culture to screen for changes in neuronal morphology requires specialized analysis software. We developed NeuronMetrics for semi-automated, quantitative analysis of two-dimensional (2D) images of fluorescently labeled cultured neurons. It skeletonizes the neuron image using two complementary image-processing techniques, capturing fine terminal neurites with high fidelity. An algorithm was devised to span wide gaps in the skeleton. NeuronMetrics uses a novel strategy based on geometric features called faces to extract a branch number estimate from complex arbors with numerous neurite-to-neurite contacts, without creating a precise, contact-free representation of the neurite arbor. It estimates total neurite length, branch number, primary neurite number, territory (the area of the convex polygon bounding the skeleton and cell body), and Polarity Index (a measure of neuronal polarity). These parameters provide fundamental information about the size and shape of neurite arbors, which are critical factors for neuronal function. NeuronMetrics streamlines optional manual tasks such as removing noise, isolating the largest primary neurite, and correcting length for self-fasciculating neurites. Numeric data are output in a single text file, readily imported into other applications for further analysis. Written as modules for ImageJ, NeuronMetrics provides practical analysis tools that are easy to use and support batch processing. Depending on the need for manual intervention, processing time for a batch of approximately 60 2D images is 1.0-2.5 h, from a folder of images to a table of numeric data. NeuronMetrics' output accelerates the quantitative detection of mutations and chemical compounds that alter neurite morphology in vitro, and will contribute to the use of cultured neurons for drug discovery.

Semantic metrics

OpenAIRE

Hu, Bo; Kalfoglou, Yannis; Dupplaw, David; Alani, Harith; Lewis, Paul; Shadbolt, Nigel

2006-01-01

In the context of the Semantic Web, many ontology-related operations, e.g. ontology ranking, segmentation, alignment, articulation, reuse, evaluation, can be boiled down to one fundamental operation: computing the similarity and/or dissimilarity among ontological entities, and in some cases among ontologies themselves. In this paper, we review standard metrics for computing distance measures and we propose a series of semantic metrics. We give a formal account of semantic metrics drawn from a...

Metric modular spaces

CERN Document Server

Chistyakov, Vyacheslav

2015-01-01

Aimed toward researchers and graduate students familiar with elements of functional analysis, linear algebra, and general topology; this book contains a general study of modulars, modular spaces, and metric modular spaces. Modulars may be thought of as generalized velocity fields and serve two important purposes: generate metric spaces in a unified manner and provide a weaker convergence, the modular convergence, whose topology is non-metrizable in general. Metric modular spaces are extensions of metric spaces, metric linear spaces, and classical modular linear spaces. The topics covered include the classification of modulars, metrizability of modular spaces, modular transforms and duality between modular spaces, metric  and modular topologies. Applications illustrated in this book include: the description of superposition operators acting in modular spaces, the existence of regular selections of set-valued mappings, new interpretations of spaces of Lipschitzian and absolutely continuous mappings, the existe...

Next-Generation Metrics: Responsible Metrics & Evaluation for Open Science

Energy Technology Data Exchange (ETDEWEB)

Wilsdon, J.; Bar-Ilan, J.; Peters, I.; Wouters, P.

2016-07-01

Metrics evoke a mixed reaction from the research community. A commitment to using data to inform decisions makes some enthusiastic about the prospect of granular, real-time analysis o of research and its wider impacts. Yet we only have to look at the blunt use of metrics such as journal impact factors, h-indices and grant income targets, to be reminded of the pitfalls. Some of the most precious qualities of academic culture resist simple quantification, and individual indicators often struggle to do justice to the richness and plurality of research. Too often, poorly designed evaluation criteria are “dominating minds, distorting behaviour and determining careers (Lawrence, 2007).” Metrics hold real power: they are constitutive of values, identities and livelihoods. How to exercise that power to more positive ends has been the focus of several recent and complementary initiatives, including the San Francisco Declaration on Research Assessment (DORA1), the Leiden Manifesto2 and The Metric Tide3 (a UK government review of the role of metrics in research management and assessment). Building on these initiatives, the European Commission, under its new Open Science Policy Platform4, is now looking to develop a framework for responsible metrics for research management and evaluation, which can be incorporated into the successor framework to Horizon 2020. (Author)

a tensor theory of gravitation in a curved metric on a flat background

International Nuclear Information System (INIS)

Drummond, J.E.

1979-01-01

A theory of gravity is proposed using a tensor potential for the field on a flat metric. This potential cannot be isolated by local observations, but some details can be deduced from measurements at a distance. The requirement that the field equations for the tensor potential shall be deducible from an action integral, that the action and field equations are gauge invariant, and, conversely, that the Lagrangian in the action integral can be integrated from the field equations leads to Einstein's field equations. The requirement that the field energy-momentum tensor exists leads to a constraint on the tensor potential. If the constraint is a differential gauge condition, then it can only be the Hilbert condition giving a unique background tensor, metric tensor and tensor potential. For a continuous field inside a solid sphere the metric must be homogeneous in the spatial coordinates, and the associated field energy-momentum tensor has properties consistent with Newtonian dynamics. (author)

Energy balances of OECD countries 1991-1992

International Nuclear Information System (INIS)

1994-01-01

Contains a compilation of data on the supply and consumption of solid fuels, oil, gas, electricity and heat. The figures are expressed in million metric tons of oil equivalent. Historical tables summarize key energy and economic indicators as well as production, trade and final consumption data. Each issue includes definitions of products and flows and explanatory notes on the individual country data as well as conversion factors from original units to metric tons of oil equivalent. (author)

Conversion Rate Optimization : Visual Neuro Programming Principles

OpenAIRE

Berezhnaya, Anastasia

2016-01-01

The influence of the world wide web has already spread in every business. Consequently, it has become crucial to develop strong online presence and offer qualified user experience for website visitors. Website optimization undeniably has proved its importance in the recent decade. This research was conducted in order to study the practical application and structure of the stages of the CRO (Conversion Rate Optimization) framework that focuses on the most representative website metric – c...

Establishing a common metric for depressive symptoms: linking the BDI-II, CES-D, and PHQ-9 to PROMIS depression.

Science.gov (United States)

Choi, Seung W; Schalet, Benjamin; Cook, Karon F; Cella, David

2014-06-01

Interest in measuring patient-reported outcomes has increased dramatically in recent decades. This has simultaneously produced numerous assessment options and confusion. In the case of depressive symptoms, there are many commonly used options for measuring the same or a very similar concept. Public and professional reporting of scores can be confused by multiple scale ranges, normative levels, and clinical thresholds. A common reporting metric would have great value and can be achieved when similar instruments are administered to a single sample and then linked to each other to produce cross-walk score tables (e.g., Dorans, 2007; Kolen & Brennan, 2004). Using multiple procedures based on item response theory and equipercentile methods, we produced cross-walk tables linking 3 popular "legacy" depression instruments-the Center for Epidemiologic Studies Depression Scale (Radloff, 1977; N = 747), the Beck Depression Inventory-II (Beck, Steer, & Brown, 1996; N = 748), and the 9-item Patient Health Questionnaire (Kroenke, Spitzer, & Williams, 2001; N = 1,120)-to the depression metric of the National Institutes of Health (NIH) Patient-Reported Outcomes Measurement Information System (PROMIS; Cella et al., 2010). The PROMIS Depression metric is centered on the U.S. general population, matching the marginal distributions of gender, age, race, and education in the 2000 U.S. census (Liu et al., 2010). The linking relationships were evaluated by resampling small subsets and estimating confidence intervals for the differences between the observed and linked PROMIS scores; in addition, PROMIS cutoff scores for depression severity were estimated to correspond with those commonly used with the legacy measures. Our results allow clinicians and researchers to retrofit existing data of 3 popular depression measures to the PROMIS Depression metric and vice versa.

Baby universe metric equivalent to an interior black-hole metric

International Nuclear Information System (INIS)

Gonzalez-Diaz, P.F.

1991-01-01

It is shown that the maximally extended metric corresponding to a large wormhole is the unique possible wormhole metric whose baby universe sector is conformally equivalent ot the maximal inextendible Kruskal metric corresponding to the interior region of a Schwarzschild black hole whose gravitational radius is half the wormhole neck radius. The physical implications of this result in the black hole evaporation process are discussed. (orig.)

Interrelationships Among Several Variables Reflecting Quantitative Thinking in Elementary School Children with Particular Emphasis upon Those Measures Involving Metric and Decimal Skills

Science.gov (United States)

Selman, Delon; And Others

1976-01-01

The relationships among measures of quantitative thinking in first through fifth grade children assigned either to an experimental math program emphasizing tactile, manipulative, or individual activity in learning metric and decimal concepts, or to a control group, were examined. Tables are presented and conclusions discussed. (Author/JKS)

Effects of metric hierarchy and rhyme predictability on word duration in The Cat in the Hat.

Science.gov (United States)

Breen, Mara

2018-05-01

Word durations convey many types of linguistic information, including intrinsic lexical features like length and frequency and contextual features like syntactic and semantic structure. The current study was designed to investigate whether hierarchical metric structure and rhyme predictability account for durational variation over and above other features in productions of a rhyming, metrically-regular children's book: The Cat in the Hat (Dr. Seuss, 1957). One-syllable word durations and inter-onset intervals were modeled as functions of segment number, lexical frequency, word class, syntactic structure, repetition, and font emphasis. Consistent with prior work, factors predicting longer word durations and inter-onset intervals included more phonemes, lower frequency, first mention, alignment with a syntactic boundary, and capitalization. A model parameter corresponding to metric grid height improved model fit of word durations and inter-onset intervals. Specifically, speakers realized five levels of metric hierarchy with inter-onset intervals such that interval duration increased linearly with increased height in the metric hierarchy. Conversely, speakers realized only three levels of metric hierarchy with word duration, demonstrating that they shortened the highly predictable rhyme resolutions. These results further understanding of the factors that affect spoken word duration, and demonstrate the myriad cues that children receive about linguistic structure from nursery rhymes. Copyright © 2018 Elsevier B.V. All rights reserved.

Properties of C-metric spaces

Science.gov (United States)

Croitoru, Anca; Apreutesei, Gabriela; Mastorakis, Nikos E.

2017-09-01

The subject of this paper belongs to the theory of approximate metrics [23]. An approximate metric on X is a real application defined on X × X that satisfies only a part of the metric axioms. In a recent paper [23], we introduced a new type of approximate metric, named C-metric, that is an application which satisfies only two metric axioms: symmetry and triangular inequality. The remarkable fact in a C-metric space is that a topological structure induced by the C-metric can be defined. The innovative idea of this paper is that we obtain some convergence properties of a C-metric space in the absence of a metric. In this paper we investigate C-metric spaces. The paper is divided into four sections. Section 1 is for Introduction. In Section 2 we recall some concepts and preliminary results. In Section 3 we present some properties of C-metric spaces, such as convergence properties, a canonical decomposition and a C-fixed point theorem. Finally, in Section 4 some conclusions are highlighted.

Learning Low-Dimensional Metrics

OpenAIRE

Jain, Lalit; Mason, Blake; Nowak, Robert

2017-01-01

This paper investigates the theoretical foundations of metric learning, focused on three key questions that are not fully addressed in prior work: 1) we consider learning general low-dimensional (low-rank) metrics as well as sparse metrics; 2) we develop upper and lower (minimax)bounds on the generalization error; 3) we quantify the sample complexity of metric learning in terms of the dimension of the feature space and the dimension/rank of the underlying metric;4) we also bound the accuracy ...

The US plutonium materials conversion program in Russia

International Nuclear Information System (INIS)

Zygmunt, S.J.; Mason, C.F.V.; Hahn, W.K.

2000-01-01

Progress has been made in Russia towards the conversion of weapons-grade plutonium (w-Pu) into plutonium oxide (PuO 2 ) suitable for further manufacture into mixed oxide (MOX) fuels. This program was started in 1998 in response to US proliferation concerns and the acknowledged international need to decrease the available weapons-grade Pu. A similar agenda is being followed in the US to address disposition of US surplus weapons-grade Pu. In Russia a conversion process has been selected and a site proposed. This paper discusses the present state of the program in support of this future operating facility that will process up to 5 metric tons of plutonium a year. (authors)

Scalar-metric and scalar-metric-torsion gravitational theories

International Nuclear Information System (INIS)

Aldersley, S.J.

1977-01-01

The techniques of dimensional analysis and of the theory of tensorial concomitants are employed to study field equations in gravitational theories which incorporate scalar fields of the Brans-Dicke type. Within the context of scalar-metric gravitational theories, a uniqueness theorem for the geometric (or gravitational) part of the field equations is proven and a Lagrangian is determined which is uniquely specified by dimensional analysis. Within the context of scalar-metric-torsion gravitational theories a uniqueness theorem for field Lagrangians is presented and the corresponding Euler-Lagrange equations are given. Finally, an example of a scalar-metric-torsion theory is presented which is similar in many respects to the Brans-Dicke theory and the Einstein-Cartan theory

Metrics of quantum states

International Nuclear Information System (INIS)

Ma Zhihao; Chen Jingling

2011-01-01

In this work we study metrics of quantum states, which are natural generalizations of the usual trace metric and Bures metric. Some useful properties of the metrics are proved, such as the joint convexity and contractivity under quantum operations. Our result has a potential application in studying the geometry of quantum states as well as the entanglement detection.

Conversational Pedagogy: Exploring Interactions between a Teaching Artist and Young Learners during Visual Arts Experiences

Science.gov (United States)

Eckhoff, Angela

2013-01-01

In many early childhood classrooms, visual arts experiences occur around a communal arts table. A shared workspace allows for spontaneous conversation and exploration of the art-making process of peers and teachers. In this setting, conversation can play an important role in visual arts experiences as children explore new media, skills, and ideas.…

METRIC context unit architecture

Energy Technology Data Exchange (ETDEWEB)

Simpson, R.O.

1988-01-01

METRIC is an architecture for a simple but powerful Reduced Instruction Set Computer (RISC). Its speed comes from the simultaneous processing of several instruction streams, with instructions from the various streams being dispatched into METRIC's execution pipeline as they become available for execution. The pipeline is thus kept full, with a mix of instructions for several contexts in execution at the same time. True parallel programming is supported within a single execution unit, the METRIC Context Unit. METRIC's architecture provides for expansion through the addition of multiple Context Units and of specialized Functional Units. The architecture thus spans a range of size and performance from a single-chip microcomputer up through large and powerful multiprocessors. This research concentrates on the specification of the METRIC Context Unit at the architectural level. Performance tradeoffs made during METRIC's design are discussed, and projections of METRIC's performance are made based on simulation studies.

I2D: code for conversion of ISOTXS structured data to DTF and ANISN structured tables

International Nuclear Information System (INIS)

Resnik, W.M. II.

1977-06-01

The I2D code converts neutron cross-section data written in the standard interface file format called ISOTXS to a matrix structured format commonly called DTF tables. Several BCD and binary output options are available including FIDO (ANISN) format. The I2D code adheres to the guidelines established by the Committee on Computer Code Coordination for standardized code development. Since some machine dependency is inherent regardless of the degree of standardization, provisions have been made in the I2D code for easy implementation on either short-word machines (IBM) or on long-word machines (CDC). 3 figures, 5 tables

Observable traces of non-metricity: New constraints on metric-affine gravity

Science.gov (United States)

Delhom-Latorre, Adrià; Olmo, Gonzalo J.; Ronco, Michele

2018-05-01

Relaxing the Riemannian condition to incorporate geometric quantities such as torsion and non-metricity may allow to explore new physics associated with defects in a hypothetical space-time microstructure. Here we show that non-metricity produces observable effects in quantum fields in the form of 4-fermion contact interactions, thereby allowing us to constrain the scale of non-metricity to be greater than 1 TeV by using results on Bahbah scattering. Our analysis is carried out in the framework of a wide class of theories of gravity in the metric-affine approach. The bound obtained represents an improvement of several orders of magnitude to previous experimental constraints.

Making the Connection: Disarmament, Development and Economic Conversion. A Resource Guide.

Science.gov (United States)

Gold, Howard, Ed.

This nine-part guide provides resources on various topics and issues related disarmament, development, and economic conversion. They include: (1) recent publications (with their tables of contents provided, when applicable); (2) research institutes; (3) non-governmental organizations with primary contacts for information; (4) research and…

Metric diffusion along foliations

CERN Document Server

Walczak, Szymon M

2017-01-01

Up-to-date research in metric diffusion along compact foliations is presented in this book. Beginning with fundamentals from the optimal transportation theory and the theory of foliations; this book moves on to cover Wasserstein distance, Kantorovich Duality Theorem, and the metrization of the weak topology by the Wasserstein distance. Metric diffusion is defined, the topology of the metric space is studied and the limits of diffused metrics along compact foliations are discussed. Essentials on foliations, holonomy, heat diffusion, and compact foliations are detailed and vital technical lemmas are proved to aide understanding. Graduate students and researchers in geometry, topology and dynamics of foliations and laminations will find this supplement useful as it presents facts about the metric diffusion along non-compact foliation and provides a full description of the limit for metrics diffused along foliation with at least one compact leaf on the two dimensions.

Fault Management Metrics

Science.gov (United States)

Johnson, Stephen B.; Ghoshal, Sudipto; Haste, Deepak; Moore, Craig

2017-01-01

This paper describes the theory and considerations in the application of metrics to measure the effectiveness of fault management. Fault management refers here to the operational aspect of system health management, and as such is considered as a meta-control loop that operates to preserve or maximize the system's ability to achieve its goals in the face of current or prospective failure. As a suite of control loops, the metrics to estimate and measure the effectiveness of fault management are similar to those of classical control loops in being divided into two major classes: state estimation, and state control. State estimation metrics can be classified into lower-level subdivisions for detection coverage, detection effectiveness, fault isolation and fault identification (diagnostics), and failure prognosis. State control metrics can be classified into response determination effectiveness and response effectiveness. These metrics are applied to each and every fault management control loop in the system, for each failure to which they apply, and probabilistically summed to determine the effectiveness of these fault management control loops to preserve the relevant system goals that they are intended to protect.

Completion of a Dislocated Metric Space

Directory of Open Access Journals (Sweden)

P. Sumati Kumari

2015-01-01

Full Text Available We provide a construction for the completion of a dislocated metric space (abbreviated d-metric space; we also prove that the completion of the metric associated with a d-metric coincides with the metric associated with the completion of the d-metric.

Metrics with vanishing quantum corrections

International Nuclear Information System (INIS)

Coley, A A; Hervik, S; Gibbons, G W; Pope, C N

2008-01-01

We investigate solutions of the classical Einstein or supergravity equations that solve any set of quantum corrected Einstein equations in which the Einstein tensor plus a multiple of the metric is equated to a symmetric conserved tensor T μν (g αβ , ∂ τ g αβ , ∂ τ ∂ σ g αβ , ...,) constructed from sums of terms, the involving contractions of the metric and powers of arbitrary covariant derivatives of the curvature tensor. A classical solution, such as an Einstein metric, is called universal if, when evaluated on that Einstein metric, T μν is a multiple of the metric. A Ricci flat classical solution is called strongly universal if, when evaluated on that Ricci flat metric, T μν vanishes. It is well known that pp-waves in four spacetime dimensions are strongly universal. We focus attention on a natural generalization; Einstein metrics with holonomy Sim(n - 2) in which all scalar invariants are zero or constant. In four dimensions we demonstrate that the generalized Ghanam-Thompson metric is weakly universal and that the Goldberg-Kerr metric is strongly universal; indeed, we show that universality extends to all four-dimensional Sim(2) Einstein metrics. We also discuss generalizations to higher dimensions

Table Tennis Club

CERN Multimedia

Table Tennis Club

2013-01-01

Apparently table tennis plays an important role in physics, not so much because physicists are interested in the theory of table tennis ball scattering, but probably because it provides useful breaks from their deep intellectual occupation. It seems that many of the greatest physicists took table tennis very seriously. For instance, Heisenberg could not even bear to lose a game of table tennis, Otto Frisch played a lot of table tennis, and had a table set up in his library, and Niels Bohr apparently beat everybody at table tennis. Therefore, as the CERN Table Tennis Club advertises on a poster for the next CERN Table Tennis Tournament: “if you want to be a great physicist, perhaps you should play table tennis”. Outdoor table at restaurant n° 1 For this reason, and also as part of the campaign launched by the CERN medical service “Move! & Eat better”, to encourage everyone at CERN to take regular exercise, the CERN Table Tennis Club, with the supp...

Remarks on G-Metric Spaces

Directory of Open Access Journals (Sweden)

Bessem Samet

2013-01-01

Full Text Available In 2005, Mustafa and Sims (2006 introduced and studied a new class of generalized metric spaces, which are called G-metric spaces, as a generalization of metric spaces. We establish some useful propositions to show that many fixed point theorems on (nonsymmetric G-metric spaces given recently by many authors follow directly from well-known theorems on metric spaces. Our technique can be easily extended to other results as shown in application.

Metric-adjusted skew information

DEFF Research Database (Denmark)

Liang, Cai; Hansen, Frank

2010-01-01

on a bipartite system and proved superadditivity of the Wigner-Yanase-Dyson skew informations for such states. We extend this result to the general metric-adjusted skew information. We finally show that a recently introduced extension to parameter values 1 ...We give a truly elementary proof of the convexity of metric-adjusted skew information following an idea of Effros. We extend earlier results of weak forms of superadditivity to general metric-adjusted skew information. Recently, Luo and Zhang introduced the notion of semi-quantum states...... of (unbounded) metric-adjusted skew information....

Software metrics: Software quality metrics for distributed systems. [reliability engineering

Science.gov (United States)

Post, J. V.

1981-01-01

Software quality metrics was extended to cover distributed computer systems. Emphasis is placed on studying embedded computer systems and on viewing them within a system life cycle. The hierarchy of quality factors, criteria, and metrics was maintained. New software quality factors were added, including survivability, expandability, and evolvability.

Radionuclide table. Pt. 1

International Nuclear Information System (INIS)

Legrand, Jean; Perolat, J.-P.; Lagoutine, Frederic; Le Gallic, Yves.

The evaluation of the following 29 radionuclides is presented: 22 Na, 24 Na, sup(24m)Na, 51 Cr, 54 Mn, 57 Co, 58 Co, sup(58m)Co, 60 Co, sup(60m)Co, 75 Se, 103 Ru, sup(103m)Rh, sup(110m)Ag- 110 Ag, 109 Cd, 125 Sb, sup(125mTe), 125 I, 133 Xe, sup(133m)Xe, 131 Cs, 134 Cs, sup(134m)Cs, 139 Ce, 144 Ce- 144 Pr, 144 Pr, 169 Er, 186 Re, 203 Hg. The introduction contains a brief description of radioactive processes and the evaluation rules followed. The best values and associated uncertainties are given for each radionuclide for the major parameters of the decay scheme and the radiation intensities emitted, together with a decay table. Gamma, X-rays and sometimes conversion electron spectra are also provided [fr

Attack-Resistant Trust Metrics

Science.gov (United States)

Levien, Raph

The Internet is an amazingly powerful tool for connecting people together, unmatched in human history. Yet, with that power comes great potential for spam and abuse. Trust metrics are an attempt to compute the set of which people are trustworthy and which are likely attackers. This chapter presents two specific trust metrics developed and deployed on the Advogato Website, which is a community blog for free software developers. This real-world experience demonstrates that the trust metrics fulfilled their goals, but that for good results, it is important to match the assumptions of the abstract trust metric computation to the real-world implementation.

TableMaker: An Excel Macro for Publication-Quality Tables

Directory of Open Access Journals (Sweden)

Marek Hlavac

2016-04-01

Full Text Available This article introduces TableMaker, a Microsoft Excel macro that produces publicationquality tables and includes them as new sheets in workbooks. The macro provides an intuitive graphical user interface that allows for the full customization of all table features. It also allows users to save and load table templates, and thus allows layouts to be both reproducible and transferable. It is distributed in a single computer file. As such, the macro is easy to share, as well as accessible to even beginning and casual users of Excel. Since it allows for the quick creation of reproducible and fully customizable tables, TableMaker can be very useful to academics, policy-makers and businesses by making the presentation and formatting of results faster and more efficient.

Symmetries of the dual metrics

International Nuclear Information System (INIS)

Baleanu, D.

1998-01-01

The geometric duality between the metric g μν and a Killing tensor K μν is studied. The conditions were found when the symmetries of the metric g μν and the dual metric K μν are the same. Dual spinning space was constructed without introduction of torsion. The general results are applied to the case of Kerr-Newmann metric

Dictionary of energy

Energy Technology Data Exchange (ETDEWEB)

Counihan, M

1981-01-01

Every aspect of energy - production, conversion and use - is discussed and explained. Comprehensive and well-illustrated entries cover fossil and other types of chemical fuel; hydroelectric and nuclear power; energy conservation; solar energy of every kind; wind, wave and tidal power. Every type of nuclear reactor is described, with emphasis on the energy technologies that have the greatest present relevance and future promise. The first section is devoted to an explanation of the units used, with conversion tables; key concepts are defined. The closing sections comprise tables of international energy statistics and a short bibliography. This dictionary is an introduction and reference book for general readers, students and all workers in energy and energy-related fields. It is fully metricated.

Mortality table construction

Science.gov (United States)

Sutawanir

2015-12-01

Mortality tables play important role in actuarial studies such as life annuities, premium determination, premium reserve, valuation pension plan, pension funding. Some known mortality tables are CSO mortality table, Indonesian Mortality Table, Bowers mortality table, Japan Mortality table. For actuary applications some tables are constructed with different environment such as single decrement, double decrement, and multiple decrement. There exist two approaches in mortality table construction : mathematics approach and statistical approach. Distribution model and estimation theory are the statistical concepts that are used in mortality table construction. This article aims to discuss the statistical approach in mortality table construction. The distributional assumptions are uniform death distribution (UDD) and constant force (exponential). Moment estimation and maximum likelihood are used to estimate the mortality parameter. Moment estimation methods are easier to manipulate compared to maximum likelihood estimation (mle). However, the complete mortality data are not used in moment estimation method. Maximum likelihood exploited all available information in mortality estimation. Some mle equations are complicated and solved using numerical methods. The article focus on single decrement estimation using moment and maximum likelihood estimation. Some extension to double decrement will introduced. Simple dataset will be used to illustrated the mortality estimation, and mortality table.

Overview of journal metrics

Directory of Open Access Journals (Sweden)

Kihong Kim

2018-02-01

Full Text Available Various kinds of metrics used for the quantitative evaluation of scholarly journals are reviewed. The impact factor and related metrics including the immediacy index and the aggregate impact factor, which are provided by the Journal Citation Reports, are explained in detail. The Eigenfactor score and the article influence score are also reviewed. In addition, journal metrics such as CiteScore, Source Normalized Impact per Paper, SCImago Journal Rank, h-index, and g-index are discussed. Limitations and problems that these metrics have are pointed out. We should be cautious to rely on those quantitative measures too much when we evaluate journals or researchers.

Informatics in radiology: Efficiency metrics for imaging device productivity.

Science.gov (United States)

Hu, Mengqi; Pavlicek, William; Liu, Patrick T; Zhang, Muhong; Langer, Steve G; Wang, Shanshan; Place, Vicki; Miranda, Rafael; Wu, Teresa Tong

2011-01-01

Acute awareness of the costs associated with medical imaging equipment is an ever-present aspect of the current healthcare debate. However, the monitoring of productivity associated with expensive imaging devices is likely to be labor intensive, relies on summary statistics, and lacks accepted and standardized benchmarks of efficiency. In the context of the general Six Sigma DMAIC (design, measure, analyze, improve, and control) process, a World Wide Web-based productivity tool called the Imaging Exam Time Monitor was developed to accurately and remotely monitor imaging efficiency with use of Digital Imaging and Communications in Medicine (DICOM) combined with a picture archiving and communication system. Five device efficiency metrics-examination duration, table utilization, interpatient time, appointment interval time, and interseries time-were derived from DICOM values. These metrics allow the standardized measurement of productivity, to facilitate the comparative evaluation of imaging equipment use and ongoing efforts to improve efficiency. A relational database was constructed to store patient imaging data, along with device- and examination-related data. The database provides full access to ad hoc queries and can automatically generate detailed reports for administrative and business use, thereby allowing staff to monitor data for trends and to better identify possible changes that could lead to improved productivity and reduced costs in association with imaging services. © RSNA, 2011.

TABLE TENNIS CLUB

CERN Document Server

TABLE TENNIS CLUB

2010-01-01

2010 CERN Table Tennis Tournament The CERN Table Tennis Club organizes its traditional CERN Table Tennis Tournament, at the Meyrin club, 2 rue de livron, in Meyrin, Saturday August 21st, in the afternoon. The tournament is open to all CERN staff, users, visitors and families, including of course summer students. See below for details. In order to register, simply send an E-mail to Jean-Pierre Revol (jean-pierre.revol@cern.ch). You can also download the registration form from the Club Web page (http://www.cern.ch/tabletennis), and send it via internal mail. Photo taken on August 22, 2009 showing some of the participants in the 2nd CERN Table Tennis tournament. INFORMATION ON CERN TABLE TENNIS CLUB CERN used to have a tradition of table tennis activities at CERN. For some reason, at the beginning of the 1980’s, the CERN Table Tennis club merged with the Meyrin Table Tennis club, a member of the Association Genevoise de Tennis de Table (AGTT). Therefore, if you want to practice table tennis, you...

Graphical comparison of calculated internal conversion coefficients

International Nuclear Information System (INIS)

Ewbank, W.B.

1980-11-01

Calculated values of the coefficients of internal conversion of gamma rays in the K shell and L 1 , L 2 , L 3 subshells from published tabulations by Band and Trzhaskovskaya and by Roesel et al. at Data Nucl. Data Tables, 21, 92-514(1978) are compared with values obtained by computer interpolation among tabulated values of Hager and Seltzer Nucl. Data, A4, 1-235(1968). In some cases, agreement among the three calculations is remarkably good, and differences are generally less than 5%. In a few cases, there are differences as large as 20 to 50%, corresponding to the threshold effect described by Roesel et al. The Z-dependent resonance minimum described by Roesel et al. is also observed in the comparison of E1-E4 conversion in the L 1 subshell. In several cases (notably M1-M4 conversion in the K shell and L 1 subshell), the Band and Roesel calculations show dramatically different dependence on gamma energy and atomic number. For Z = 100, the Band calculation for E4 conversion in the L 3 subshell shows irregular behavior at energies below the K-shell binding energy. A few high-quality measurements of internal conversion coefficients (+-5%) would help greatly to establish a basis for choice among the theoretical calculations. 32 figures

Holographic Spherically Symmetric Metrics

Science.gov (United States)

Petri, Michael

The holographic principle (HP) conjectures, that the maximum number of degrees of freedom of any realistic physical system is proportional to the system's boundary area. The HP has its roots in the study of black holes. It has recently been applied to cosmological solutions. In this article we apply the HP to spherically symmetric static space-times. We find that any regular spherically symmetric object saturating the HP is subject to tight constraints on the (interior) metric, energy-density, temperature and entropy-density. Whenever gravity can be described by a metric theory, gravity is macroscopically scale invariant and the laws of thermodynamics hold locally and globally, the (interior) metric of a regular holographic object is uniquely determined up to a constant factor and the interior matter-state must follow well defined scaling relations. When the metric theory of gravity is general relativity, the interior matter has an overall string equation of state (EOS) and a unique total energy-density. Thus the holographic metric derived in this article can serve as simple interior 4D realization of Mathur's string fuzzball proposal. Some properties of the holographic metric and its possible experimental verification are discussed. The geodesics of the holographic metric describe an isotropically expanding (or contracting) universe with a nearly homogeneous matter-distribution within the local Hubble volume. Due to the overall string EOS the active gravitational mass-density is zero, resulting in a coasting expansion with Ht = 1, which is compatible with the recent GRB-data.

ARM Data-Oriented Metrics and Diagnostics Package for Climate Model Evaluation Value-Added Product

Energy Technology Data Exchange (ETDEWEB)

Zhang, Chengzhu [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Xie, Shaocheng [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-15

A Python-based metrics and diagnostics package is currently being developed by the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Infrastructure Team at Lawrence Livermore National Laboratory (LLNL) to facilitate the use of long-term, high-frequency measurements from the ARM Facility in evaluating the regional climate simulation of clouds, radiation, and precipitation. This metrics and diagnostics package computes climatological means of targeted climate model simulation and generates tables and plots for comparing the model simulation with ARM observational data. The Coupled Model Intercomparison Project (CMIP) model data sets are also included in the package to enable model intercomparison as demonstrated in Zhang et al. (2017). The mean of the CMIP model can serve as a reference for individual models. Basic performance metrics are computed to measure the accuracy of mean state and variability of climate models. The evaluated physical quantities include cloud fraction, temperature, relative humidity, cloud liquid water path, total column water vapor, precipitation, sensible and latent heat fluxes, and radiative fluxes, with plan to extend to more fields, such as aerosol and microphysics properties. Process-oriented diagnostics focusing on individual cloud- and precipitation-related phenomena are also being developed for the evaluation and development of specific model physical parameterizations. The version 1.0 package is designed based on data collected at ARM’s Southern Great Plains (SGP) Research Facility, with the plan to extend to other ARM sites. The metrics and diagnostics package is currently built upon standard Python libraries and additional Python packages developed by DOE (such as CDMS and CDAT). The ARM metrics and diagnostic package is available publicly with the hope that it can serve as an easy entry point for climate modelers to compare their models with ARM data. In this report, we first present the input data, which

Metric Structures on Fibered Manifolds Through Partitions of Unity

Directory of Open Access Journals (Sweden)

Hulya Kadioglu

2016-05-01

Full Text Available The notion of partitions of unity is extremely useful as it allows one to extend local constructions on Euclidean patches to global ones. It is widely used in many fields in mathematics. Therefore, prolongation of this useful tool to another manifold may help constructing many geometric structures. In this paper, we construct a partition of unity on a fiber bundle by using a given partition of unity on the base manifold. On the other hand we show that the converse is also possible if it is a vector bundle. As an application, we define a Riemannian metric on the fiber bundle by using induced partition of unity on the fiber bundle.

Elekta Precise Table characteristics of IGRT remote table positioning

International Nuclear Information System (INIS)

Riis, Hans L.; Zimmermann, Sune J.

2009-01-01

Cone beam CT is a powerful tool to ensure an optimum patient positioning in radiotherapy. When cone beam CT scan of a patient is acquired, scan data of the patient are compared and evaluated against a reference image set and patient position offset is calculated. Via the linac control system, the patient is moved to correct for position offset and treatment starts. This procedure requires a reliable system for movement of patient. In this work we present a new method to characterize the reproducibility, linearity and accuracy in table positioning. The method applies to all treatment tables used in radiotherapy. Material and methods. The table characteristics are investigated on our two recent Elekta Synergy Platforms equipped with Precise Table installed in a shallow pit concrete cavity. Remote positioning of the table uses the auto set-up (ASU) feature in the linac control system software Desktop Pro R6.1. The ASU is used clinically to correct for patient positioning offset calculated via cone beam CT (XVI)-software. High precision steel rulers and a USB-microscope has been used to detect the relative table position in vertical, lateral and longitudinal direction. The effect of patient is simulated by applying external load on the iBEAM table top. For each table position an image is exposed of the ruler and display values of actual table position in the linac control system is read out. The table is moved in full range in lateral direction (50 cm) and longitudinal direction (100 cm) while in vertical direction a limited range is used (40 cm). Results and discussion. Our results show a linear relation between linac control system read out and measured position. Effects of imperfect calibration are seen. A reproducibility within a standard deviation of 0.22 mm in lateral and longitudinal directions while within 0.43 mm in vertical direction has been observed. The usage of XVI requires knowledge of the characteristics of remote table positioning. It is our opinion

AcuTable

DEFF Research Database (Denmark)

Dibbern, Simon; Rasmussen, Kasper Vestergaard; Ortiz-Arroyo, Daniel

2017-01-01

In this paper we describe AcuTable, a new tangible user interface. AcuTable is a shapeable surface that employs capacitive touch sensors. The goal of AcuTable was to enable the exploration of the capabilities of such haptic interface and its applications. We describe its design and implementation...

Metric regularity and subdifferential calculus

International Nuclear Information System (INIS)

Ioffe, A D

2000-01-01

The theory of metric regularity is an extension of two classical results: the Lyusternik tangent space theorem and the Graves surjection theorem. Developments in non-smooth analysis in the 1980s and 1990s paved the way for a number of far-reaching extensions of these results. It was also well understood that the phenomena behind the results are of metric origin, not connected with any linear structure. At the same time it became clear that some basic hypotheses of the subdifferential calculus are closely connected with the metric regularity of certain set-valued maps. The survey is devoted to the metric theory of metric regularity and its connection with subdifferential calculus in Banach spaces

Context-dependent ATC complexity metric

NARCIS (Netherlands)

Mercado Velasco, G.A.; Borst, C.

2015-01-01

Several studies have investigated Air Traffic Control (ATC) complexity metrics in a search for a metric that could best capture workload. These studies have shown how daunting the search for a universal workload metric (one that could be applied in different contexts: sectors, traffic patterns,

Validation of conversion between mini-mental state examination and montreal cognitive assessment.

Science.gov (United States)

Lawton, Michael; Kasten, Meike; May, Margaret T; Mollenhauer, Brit; Schaumburg, Martina; Liepelt-Scarfone, Inga; Maetzler, Walter; Vollstedt, Eva-Juliane; Hu, Michele T M; Berg, Daniela; Ben-Shlomo, Yoav

2016-04-01

Harmonizing data across cohorts is important for validating findings or combining data in meta-analyses. We replicate and validate a previous conversion of MoCA to MMSE in PD. We used five studies with 1,161 PD individuals and 2,091 observations measured with both the MoCA and MMSE. We compared a previously published conversion table using equipercentile equating with log-linear smoothing to our internally derived scores. Both conversions found good agreement within and across the studies when comparing true and converted MMSE (mean difference: 0.05; standard deviation: 1.84; median difference: 0; interquartile range: -1 to 1, using internal conversion). These results show that one can get a reliable and valid conversion between two commonly used measures of cognition in PD studies. These approaches need to be applied to other scales and domains to enable large-scale collaborative analyses across multiple PD cohorts. © 2016 The Authors. International Parkinson and Movement Disorder Society.

DLA Energy Biofuel Feedstock Metrics Study

Science.gov (United States)

2012-12-11

moderately/highly in- vasive  Metric 2: Genetically modified organism ( GMO ) hazard, Yes/No and Hazard Category  Metric 3: Species hybridization...4– biofuel distribution Stage # 5– biofuel use Metric 1: State inva- siveness ranking Yes Minimal Minimal No No Metric 2: GMO hazard Yes...may utilize GMO microbial or microalgae species across the applicable biofuel life cycles (stages 1–3). The following consequence Metrics 4–6 then

Symmetries of Taub-NUT dual metrics

International Nuclear Information System (INIS)

Baleanu, D.; Codoban, S.

1998-01-01

Recently geometric duality was analyzed for a metric which admits Killing tensors. An interesting example arises when the manifold has Killing-Yano tensors. The symmetries of the dual metrics in the case of Taub-NUT metric are investigated. Generic and non-generic symmetries of dual Taub-NUT metric are analyzed

Metric learning

CERN Document Server

Bellet, Aurelien; Sebban, Marc

2015-01-01

Similarity between objects plays an important role in both human cognitive processes and artificial systems for recognition and categorization. How to appropriately measure such similarities for a given task is crucial to the performance of many machine learning, pattern recognition and data mining methods. This book is devoted to metric learning, a set of techniques to automatically learn similarity and distance functions from data that has attracted a lot of interest in machine learning and related fields in the past ten years. In this book, we provide a thorough review of the metric learnin

Technical Privacy Metrics: a Systematic Survey

OpenAIRE

Wagner, Isabel; Eckhoff, David

2018-01-01

The file attached to this record is the author's final peer reviewed version The goal of privacy metrics is to measure the degree of privacy enjoyed by users in a system and the amount of protection offered by privacy-enhancing technologies. In this way, privacy metrics contribute to improving user privacy in the digital world. The diversity and complexity of privacy metrics in the literature makes an informed choice of metrics challenging. As a result, instead of using existing metrics, n...

Conversion of the 42 keV transition in the decay of 191Os

International Nuclear Information System (INIS)

Bhuloka Reddy, S.; Narasimham, K.L.; Thirumala Rao, B.V.; Lakshminarayana, V.

1986-01-01

The total as well as the L-conversion coefficient of the 42 KeV transition in the decay of 191 Os are determined from intensity balance considerations and XPG technique, respectively, using a 3 mm Si(Li) detector system. The resultant values are αsub(T) = 13709 (1900), αsub(L) = 11700 (2100). The present total conversion coefficients shows good agreement within the uncertainty limits, with the value αsub(T) = 13.500→ 5200 +21100 reported by Lange, whereas the L-conversion coefficient is reported for the first time. Our present values are also compared with the theoretical values interpolated from the tables of Hager and Seltzer and of Rosel et al

Supplemental materials for the ICDP-USGS Eyreville A, B, and C core holes, Chesapeake Bay impact structure: Core-box photographs, coring-run tables, and depth-conversion files

Science.gov (United States)

Durand, C.T.; Edwards, L.E.; Malinconico, M.L.; Powars, D.S.

2009-01-01

During 2005-2006, the International Continental Scientific Drilling Program and the U.S. Geological Survey drilled three continuous core holes into the Chesapeake Bay impact structure to a total depth of 1766.3 m. A collection of supplemental materials that presents a record of the core recovery and measurement data for the Eyreville cores is available on CD-ROM at the end of this volume and in the GSA Data Repository. The supplemental materials on the CD-ROM include digital photographs of each core box from the three core holes, tables of the three coring-run logs, as recorded on site, and a set of depth-conversion programs. In this chapter, the contents, purposes, and basic applications of the supplemental materials are briefly described. With this information, users can quickly decide if the materials will apply to their specific research needs. ?? 2009 The Geological Society of America.

A programming system for bubble chamber photographs measuring tables on-line to a computer

International Nuclear Information System (INIS)

Miche, Roger.

1975-06-01

A programming system available on an industrial computer, type PDP 15/20, performing the exploitation of bubble chamber pictures with the projection tables on line to the computer was developed. This system must suit the particular conditions met in the analysis of photographs from different bubble chambers, the different stage for dealing with the views (scanning, premeasurement, measurement) adapting to different strategies in the handling of measurements. The exploitation of photographs takes place in a conversational mode to which a concrete form is given by sending messages to the operators at the tables and by receiving coded answers. In this framework, the aims of the operating system are: to guide the operator work at the tables while allowing them to interrupt the normal sequence of events, to carry out some elementary logical checks, to write on magnetic tape the checked data with the appropriate labels as required [fr

On Information Metrics for Spatial Coding.

Science.gov (United States)

Souza, Bryan C; Pavão, Rodrigo; Belchior, Hindiael; Tort, Adriano B L

2018-04-01

The hippocampal formation is involved in navigation, and its neuronal activity exhibits a variety of spatial correlates (e.g., place cells, grid cells). The quantification of the information encoded by spikes has been standard procedure to identify which cells have spatial correlates. For place cells, most of the established metrics derive from Shannon's mutual information (Shannon, 1948), and convey information rate in bits/s or bits/spike (Skaggs et al., 1993, 1996). Despite their widespread use, the performance of these metrics in relation to the original mutual information metric has never been investigated. In this work, using simulated and real data, we find that the current information metrics correlate less with the accuracy of spatial decoding than the original mutual information metric. We also find that the top informative cells may differ among metrics, and show a surrogate-based normalization that yields comparable spatial information estimates. Since different information metrics may identify different neuronal populations, we discuss current and alternative definitions of spatially informative cells, which affect the metric choice. Copyright © 2018 IBRO. Published by Elsevier Ltd. All rights reserved.

Generalized Painleve-Gullstrand metrics

Energy Technology Data Exchange (ETDEWEB)

Lin Chunyu [Department of Physics, National Cheng Kung University, Tainan 70101, Taiwan (China)], E-mail: l2891112@mail.ncku.edu.tw; Soo Chopin [Department of Physics, National Cheng Kung University, Tainan 70101, Taiwan (China)], E-mail: cpsoo@mail.ncku.edu.tw

2009-02-02

An obstruction to the implementation of spatially flat Painleve-Gullstrand (PG) slicings is demonstrated, and explicitly discussed for Reissner-Nordstroem and Schwarzschild-anti-deSitter spacetimes. Generalizations of PG slicings which are not spatially flat but which remain regular at the horizons are introduced. These metrics can be obtained from standard spherically symmetric metrics by physical Lorentz boosts. With these generalized PG metrics, problematic contributions to the imaginary part of the action in the Parikh-Wilczek derivation of Hawking radiation due to the obstruction can be avoided.

Kerr metric in the deSitter background

International Nuclear Information System (INIS)

Vaidya, P.C.

1984-01-01

In addition to the Kerr metric with cosmological constant Λ several other metrics are presented giving a Kerr-like solution of Einstein's equations in the background of deSitter universe. A new metric of what may be termed as rotating deSitter space-time devoid of matter but containing null fluid with twisting null rays, has been presented. This metric reduces to the standard deSitter metric when the twist in the rays vanishes. Kerr metric in this background is the immediate generalization of Schwarzschild's exterior metric with cosmological constant. (author)

The physical properties of Santowax 'R' for heat transfer calculations (AERE R/M 183 revised)

International Nuclear Information System (INIS)

Bowring, R.W.; Garton, D.A.; Kinneir, J.H.

1961-03-01

Values of the following physical properties of Santowax 'R' are presented in graphical and/or tabular form in both English and Metric units: Vapour Pressure, Specific heat, Enthalpy, Density, Dynamic viscosity, Kinematic viscosity, Thermal conductivity, Prandtl number, Surface tension, Latent heat of vaporisation, Critical properties, Gas solubilities. The data were obtained by new experimental measurements, by calculation or from the published literature. Wherever possible an estimate of the probable error is given. Conversion factors and Tables are also presented to facilitate the conversion of any of the properties to convenient units required for calculations. (author)

Kerr metric in cosmological background

Energy Technology Data Exchange (ETDEWEB)

Vaidya, P C [Gujarat Univ., Ahmedabad (India). Dept. of Mathematics

1977-06-01

A metric satisfying Einstein's equation is given which in the vicinity of the source reduces to the well-known Kerr metric and which at large distances reduces to the Robertson-Walker metric of a nomogeneous cosmological model. The radius of the event horizon of the Kerr black hole in the cosmological background is found out.

Two classes of metric spaces

Directory of Open Access Journals (Sweden)

Isabel Garrido

2016-04-01

Full Text Available The class of metric spaces (X,d known as small-determined spaces, introduced by Garrido and Jaramillo, are properly defined by means of some type of real-valued Lipschitz functions on X. On the other hand, B-simple metric spaces introduced by Hejcman are defined in terms of some kind of bornologies of bounded subsets of X. In this note we present a common framework where both classes of metric spaces can be studied which allows us to see not only the relationships between them but also to obtain new internal characterizations of these metric properties.

CERN Table Tennis Club

CERN Multimedia

CERN Table Tennis Club

2014-01-01

CERN Table Tennis Club Announcing CERN 60th Anniversary Table Tennis Tournament to take place at CERN, from July 1 to July 15, 2014   The CERN Table Tennis Club, reborn in 2008, is encouraging people at CERN to take more regular exercise. This is why the Club, thanks to the strong support of the CERN Staff Association, installed last season a first outdoor table on the terrace of restaurant # 1, and will install another one this season on the terrace of Restaurant # 2. Table tennis provides both physical exercise and friendly social interactions. The CERN Table Tennis club is happy to use the unique opportunity of the 60th CERN anniversary to promote table tennis at CERN, as it is a game that everybody can easily play, regardless of level. Table tennis is particularly well suited for CERN, as many great physicists play table tennis, as you might already know: “Heisenberg could not even bear to lose a game of table tennis”; “Otto Frisch played a lot of table tennis;...

A Metric for Heterotic Moduli

Science.gov (United States)

Candelas, Philip; de la Ossa, Xenia; McOrist, Jock

2017-12-01

Heterotic vacua of string theory are realised, at large radius, by a compact threefold with vanishing first Chern class together with a choice of stable holomorphic vector bundle. These form a wide class of potentially realistic four-dimensional vacua of string theory. Despite all their phenomenological promise, there is little understanding of the metric on the moduli space of these. What is sought is the analogue of special geometry for these vacua. The metric on the moduli space is important in phenomenology as it normalises D-terms and Yukawa couplings. It is also of interest in mathematics, since it generalises the metric, first found by Kobayashi, on the space of gauge field connections, to a more general context. Here we construct this metric, correct to first order in {α^{\\backprime}}, in two ways: first by postulating a metric that is invariant under background gauge transformations of the gauge field, and also by dimensionally reducing heterotic supergravity. These methods agree and the resulting metric is Kähler, as is required by supersymmetry. Checking the metric is Kähler is intricate and the anomaly cancellation equation for the H field plays an essential role. The Kähler potential nevertheless takes a remarkably simple form: it is the Kähler potential of special geometry with the Kähler form replaced by the {α^{\\backprime}}-corrected hermitian form.

Quantifying Blood Loss and Transfusion Risk After Primary vs Conversion Total Hip Arthroplasty.

Science.gov (United States)

Newman, Jared M; Webb, Matthew R; Klika, Alison K; Murray, Trevor G; Barsoum, Wael K; Higuera, Carlos A

2017-06-01

Primary total hip arthroplasty (THA) and conversion THA may result in substantial blood loss, sometimes necessitating transfusion. Despite the complexities of the latter, both are grouped in the same category for quality assessment and reimbursement. This study's purpose was to compare both blood loss and transfusion risk in primary and conversion THA and identify their associated predictors. A total of 1616 patients who underwent primary and conversion THA at a single hospital from 2009-2013 were reviewed (primary THA = 1575; conversion THA = 41). Demographics, comorbidities, and perioperative data were collected from electronic records. Blood loss was calculated using a validated method. Transfusion triggers were based on standardized criteria. Separate multivariable regression models for blood loss and transfusion were performed. Conversion THA patients were younger (P = .002), had lower age-adjusted Charlson scores (P = .006), longer surgeries (P quantified in the present study and showed consistent results between the 2 metrics. The differences between these procedures should be addressed during quality assurance because conversion THA is associated with higher resource utilization, which is important in the allocation of resources and tiered reimbursement strategies. Copyright © 2017 Elsevier Inc. All rights reserved.

On characterizations of quasi-metric completeness

Energy Technology Data Exchange (ETDEWEB)

Dag, H.; Romaguera, S.; Tirado, P.

2017-07-01

Hu proved in [4] that a metric space (X, d) is complete if and only if for any closed subspace C of (X, d), every Banach contraction on C has fixed point. Since then several authors have investigated the problem of characterizing the metric completeness by means of fixed point theorems. Recently this problem has been studied in the more general context of quasi-metric spaces for different notions of completeness. Here we present a characterization of a kind of completeness for quasi-metric spaces by means of a quasi-metric versions of Hu’s theorem. (Author)

Engineering performance metrics

Science.gov (United States)

Delozier, R.; Snyder, N.

1993-03-01

Implementation of a Total Quality Management (TQM) approach to engineering work required the development of a system of metrics which would serve as a meaningful management tool for evaluating effectiveness in accomplishing project objectives and in achieving improved customer satisfaction. A team effort was chartered with the goal of developing a system of engineering performance metrics which would measure customer satisfaction, quality, cost effectiveness, and timeliness. The approach to developing this system involved normal systems design phases including, conceptual design, detailed design, implementation, and integration. The lessons teamed from this effort will be explored in this paper. These lessons learned may provide a starting point for other large engineering organizations seeking to institute a performance measurement system accomplishing project objectives and in achieving improved customer satisfaction. To facilitate this effort, a team was chartered to assist in the development of the metrics system. This team, consisting of customers and Engineering staff members, was utilized to ensure that the needs and views of the customers were considered in the development of performance measurements. The development of a system of metrics is no different than the development of any type of system. It includes the steps of defining performance measurement requirements, measurement process conceptual design, performance measurement and reporting system detailed design, and system implementation and integration.

Brand metrics that matter

NARCIS (Netherlands)

Muntinga, D.; Bernritter, S.

2017-01-01

Het merk staat steeds meer centraal in de organisatie. Het is daarom essentieel om de gezondheid, prestaties en ontwikkelingen van het merk te meten. Het is echter een uitdaging om de juiste brand metrics te selecteren. Een enorme hoeveelheid metrics vraagt de aandacht van merkbeheerders. Maar welke

Privacy Metrics and Boundaries

NARCIS (Netherlands)

L-F. Pau (Louis-François)

2005-01-01

textabstractThis paper aims at defining a set of privacy metrics (quantitative and qualitative) in the case of the relation between a privacy protector ,and an information gatherer .The aims with such metrics are: -to allow to assess and compare different user scenarios and their differences; for

Internal conversion coefficients of high multipole transitions: Experiment and theories

International Nuclear Information System (INIS)

Gerl, J.; Vijay Sai, K.; Sainath, M.; Gowrishankar, R.; Venkataramaniah, K.

2008-01-01

A compilation of the available experimental internal conversion coefficients (ICCs), α T , α K , α L , and ratios K/L and K/LM of high multipole (L > 2) transitions for a number of elements in the range 21 ≤ Z ≤ 94 is presented. Our listing of experimental data includes 194 data sets on 110 E3 transitions, 10 data sets on 6 E4 transitions, 11 data sets on 7 E5 transitions, 38 data sets on 21 M3 transitions, and 132 data sets on 68 M4 transitions. Data with less than 10% experimental uncertainty have been selected for comparison with the theoretical values of Hager and Seltzer [R.S. Hager, E.C. Seltzer, Nucl. Data Tables A 4 (1968) 1], Rosel et al. [F. Roesel, H.M. Fries, K. Alder, H.C. Pauli, At. Data Nucl. Data Tables 21 (1978) 91], and BRICC. The relative percentage deviations (%Δ) have been calculated for each of the above theories and the averages (%Δ-bar) are estimated. The Band et al. [I.M. Band, M.B. Trzhaskovskaya, C.W. Nestor Jr., P.O. Tikkanen, S. Raman, At. Data Nucl. Data Tables 81 (2002) 1] tables, using the BRICC interpolation code, are seen to give theoretical ICCs closest to experimental values

Cyber threat metrics.

Energy Technology Data Exchange (ETDEWEB)

Frye, Jason Neal; Veitch, Cynthia K.; Mateski, Mark Elliot; Michalski, John T.; Harris, James Mark; Trevino, Cassandra M.; Maruoka, Scott

2012-03-01

Threats are generally much easier to list than to describe, and much easier to describe than to measure. As a result, many organizations list threats. Fewer describe them in useful terms, and still fewer measure them in meaningful ways. This is particularly true in the dynamic and nebulous domain of cyber threats - a domain that tends to resist easy measurement and, in some cases, appears to defy any measurement. We believe the problem is tractable. In this report we describe threat metrics and models for characterizing threats consistently and unambiguously. The purpose of this report is to support the Operational Threat Assessment (OTA) phase of risk and vulnerability assessment. To this end, we focus on the task of characterizing cyber threats using consistent threat metrics and models. In particular, we address threat metrics and models for describing malicious cyber threats to US FCEB agencies and systems.

Fixed point theory in metric type spaces

CERN Document Server

Agarwal, Ravi P; O’Regan, Donal; Roldán-López-de-Hierro, Antonio Francisco

2015-01-01

Written by a team of leading experts in the field, this volume presents a self-contained account of the theory, techniques and results in metric type spaces (in particular in G-metric spaces); that is, the text approaches this important area of fixed point analysis beginning from the basic ideas of metric space topology. The text is structured so that it leads the reader from preliminaries and historical notes on metric spaces (in particular G-metric spaces) and on mappings, to Banach type contraction theorems in metric type spaces, fixed point theory in partially ordered G-metric spaces, fixed point theory for expansive mappings in metric type spaces, generalizations, present results and techniques in a very general abstract setting and framework. Fixed point theory is one of the major research areas in nonlinear analysis. This is partly due to the fact that in many real world problems fixed point theory is the basic mathematical tool used to establish the existence of solutions to problems which arise natur...

Efficient electrochemical CO2 conversion powered by renewable energy.

Science.gov (United States)

Kauffman, Douglas R; Thakkar, Jay; Siva, Rajan; Matranga, Christopher; Ohodnicki, Paul R; Zeng, Chenjie; Jin, Rongchao

2015-07-22

The catalytic conversion of CO2 into industrially relevant chemicals is one strategy for mitigating greenhouse gas emissions. Along these lines, electrochemical CO2 conversion technologies are attractive because they can operate with high reaction rates at ambient conditions. However, electrochemical systems require electricity, and CO2 conversion processes must integrate with carbon-free, renewable-energy sources to be viable on larger scales. We utilize Au25 nanoclusters as renewably powered CO2 conversion electrocatalysts with CO2 → CO reaction rates between 400 and 800 L of CO2 per gram of catalytic metal per hour and product selectivities between 80 and 95%. These performance metrics correspond to conversion rates approaching 0.8-1.6 kg of CO2 per gram of catalytic metal per hour. We also present data showing CO2 conversion rates and product selectivity strongly depend on catalyst loading. Optimized systems demonstrate stable operation and reaction turnover numbers (TONs) approaching 6 × 10(6) molCO2 molcatalyst(-1) during a multiday (36 h total hours) CO2 electrolysis experiment containing multiple start/stop cycles. TONs between 1 × 10(6) and 4 × 10(6) molCO2 molcatalyst(-1) were obtained when our system was powered by consumer-grade renewable-energy sources. Daytime photovoltaic-powered CO2 conversion was demonstrated for 12 h and we mimicked low-light or nighttime operation for 24 h with a solar-rechargeable battery. This proof-of-principle study provides some of the initial performance data necessary for assessing the scalability and technical viability of electrochemical CO2 conversion technologies. Specifically, we show the following: (1) all electrochemical CO2 conversion systems will produce a net increase in CO2 emissions if they do not integrate with renewable-energy sources, (2) catalyst loading vs activity trends can be used to tune process rates and product distributions, and (3) state-of-the-art renewable-energy technologies are sufficient

Deep Transfer Metric Learning.

Science.gov (United States)

Junlin Hu; Jiwen Lu; Yap-Peng Tan; Jie Zhou

2016-12-01

Conventional metric learning methods usually assume that the training and test samples are captured in similar scenarios so that their distributions are assumed to be the same. This assumption does not hold in many real visual recognition applications, especially when samples are captured across different data sets. In this paper, we propose a new deep transfer metric learning (DTML) method to learn a set of hierarchical nonlinear transformations for cross-domain visual recognition by transferring discriminative knowledge from the labeled source domain to the unlabeled target domain. Specifically, our DTML learns a deep metric network by maximizing the inter-class variations and minimizing the intra-class variations, and minimizing the distribution divergence between the source domain and the target domain at the top layer of the network. To better exploit the discriminative information from the source domain, we further develop a deeply supervised transfer metric learning (DSTML) method by including an additional objective on DTML, where the output of both the hidden layers and the top layer are optimized jointly. To preserve the local manifold of input data points in the metric space, we present two new methods, DTML with autoencoder regularization and DSTML with autoencoder regularization. Experimental results on face verification, person re-identification, and handwritten digit recognition validate the effectiveness of the proposed methods.

Energy functionals for Calabi-Yau metrics

International Nuclear Information System (INIS)

Headrick, M; Nassar, A

2013-01-01

We identify a set of ''energy'' functionals on the space of metrics in a given Kähler class on a Calabi-Yau manifold, which are bounded below and minimized uniquely on the Ricci-flat metric in that class. Using these functionals, we recast the problem of numerically solving the Einstein equation as an optimization problem. We apply this strategy, using the ''algebraic'' metrics (metrics for which the Kähler potential is given in terms of a polynomial in the projective coordinates), to the Fermat quartic and to a one-parameter family of quintics that includes the Fermat and conifold quintics. We show that this method yields approximations to the Ricci-flat metric that are exponentially accurate in the degree of the polynomial (except at the conifold point, where the convergence is polynomial), and therefore orders of magnitude more accurate than the balanced metrics, previously studied as approximations to the Ricci-flat metric. The method is relatively fast and easy to implement. On the theoretical side, we also show that the functionals can be used to give a heuristic proof of Yau's theorem

Tabled Execution in Scheme

Energy Technology Data Exchange (ETDEWEB)

Willcock, J J; Lumsdaine, A; Quinlan, D J

2008-08-19

Tabled execution is a generalization of memorization developed by the logic programming community. It not only saves results from tabled predicates, but also stores the set of currently active calls to them; tabled execution can thus provide meaningful semantics for programs that seemingly contain infinite recursions with the same arguments. In logic programming, tabled execution is used for many purposes, both for improving the efficiency of programs, and making tasks simpler and more direct to express than with normal logic programs. However, tabled execution is only infrequently applied in mainstream functional languages such as Scheme. We demonstrate an elegant implementation of tabled execution in Scheme, using a mix of continuation-passing style and mutable data. We also show the use of tabled execution in Scheme for a problem in formal language and automata theory, demonstrating that tabled execution can be a valuable tool for Scheme users.

Determination of trace levels of iodine in table salt by ICP-TOF MS

International Nuclear Information System (INIS)

Waqar, F.; Muhammad, B.; Hakim, M.; Jan, S.

2012-01-01

An ion exchange method was established for the effective removal of sodium matrix for iodine determination by ICP-TOF-MS technique. Since the direct determination of trace level analytes in the presence of heavy matrix is not recommended by this technique. Therefore, the removal of matrix is essentially required to achieve better detection limits and to avoid memory effects. The extraction system was designed for the removal of matrix prior to the analysis by ICP-MS, various parameters were optimized to achieve efficient removal of matrix. The accuracy of the method was evaluated by spiking salt samples with known amount of iodine (50 mu g/g) and % recoveries were calculated. The recoveries obtained were > 98% with relative standard deviation (RSD) < 5%. The established method was applied for the analysis of commercially available iodized table salt samples. The results and % recoveries are given. The most commonly used iodo metric titration method is not satisfactory as it has 5-10 % quantitative error. Our method is reliable and could be conveniently applied for the determination of iodine in table salt samples. (Orig./A.B.)

Regge calculus from discontinuous metrics

International Nuclear Information System (INIS)

Khatsymovsky, V.M.

2003-01-01

Regge calculus is considered as a particular case of the more general system where the linklengths of any two neighbouring 4-tetrahedra do not necessarily coincide on their common face. This system is treated as that one described by metric discontinuous on the faces. In the superspace of all discontinuous metrics the Regge calculus metrics form some hypersurface defined by continuity conditions. Quantum theory of the discontinuous metric system is assumed to be fixed somehow in the form of quantum measure on (the space of functionals on) the superspace. The problem of reducing this measure to the Regge hypersurface is addressed. The quantum Regge calculus measure is defined from a discontinuous metric measure by inserting the δ-function-like phase factor. The requirement that continuity conditions be imposed in a 'face-independent' way fixes this factor uniquely. The term 'face-independent' means that this factor depends only on the (hyper)plane spanned by the face, not on it's form and size. This requirement seems to be natural from the viewpoint of existence of the well-defined continuum limit maximally free of lattice artefacts

Numerical Calabi-Yau metrics

International Nuclear Information System (INIS)

Douglas, Michael R.; Karp, Robert L.; Lukic, Sergio; Reinbacher, Rene

2008-01-01

We develop numerical methods for approximating Ricci flat metrics on Calabi-Yau hypersurfaces in projective spaces. Our approach is based on finding balanced metrics and builds on recent theoretical work by Donaldson. We illustrate our methods in detail for a one parameter family of quintics. We also suggest several ways to extend our results

Metrics for Evaluation of Student Models

Science.gov (United States)

Pelanek, Radek

2015-01-01

Researchers use many different metrics for evaluation of performance of student models. The aim of this paper is to provide an overview of commonly used metrics, to discuss properties, advantages, and disadvantages of different metrics, to summarize current practice in educational data mining, and to provide guidance for evaluation of student…

Symbol Tables and Branch Tables: Linking Applications Together

Science.gov (United States)

Handler, Louis M.

2011-01-01

This document explores the computer techniques used to execute software whose parts are compiled and linked separately. The computer techniques include using a branch table or indirect address table to connect the parts. Methods of storing the information in data structures are discussed as well as differences between C and C++.

Nano-materials for solar energy conversion

International Nuclear Information System (INIS)

Davenas, J.; Boiteux, G.; Ltaief, A.; Barlier, V.

2006-01-01

Nano-materials present an important development potential in the field of photovoltaic conversion in opening new outlooks in the reduction of the solar energy cost. The organic or hybrid solar cells principle is based on the electron-hole pairs dissociation, generated under solar radiation on a conjugated polymer, by chemical species acting as electrons acceptors. The two ways based on fullerenes dispersion or on TiO 2 particles in a semi-conductor polymer (MEH-PPV, PVK) are discussed. The acceptors concentration is high in order to allow the conduction of the electrons on a percolation way, the polymer providing the holes conduction. A new preparation method of the mixtures MEH-PPV/fullerenes based on the use of specific solvents has allowed to produce fullerenes having nano-metric sizes ranges. It has then been possible to decrease the fullerenes concentration allowing the dissociation and the transport of photoinduced charges. The way based on the in-situ generation of TiO 2 from an organometallic precursor has allowed to obtain dispersions of nano-metric inorganic particles. The optimization of the photovoltaic properties of these nano-composites requires a particular adjustment of their composition and size ranges leading to a better control of the synthesis processes. (O.M.)

Thermodynamic properties of mineral compounds (tables); Proprietes thermodynamiques des composes mineraux (tables)

Energy Technology Data Exchange (ETDEWEB)

Perrot, P. [Lille-1 Univ., Lab. de Metallurgie Physique, UMR CNRS 8517, 59 - Villeneuve-d' Ascq (France)

2005-10-01

This article presents, in the form of tables, the thermodynamic data necessary for the calculation of equilibrium constants of reactions between mineral compounds (Rb, Re, Ru, S, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Tc, Te, Th, Ti, Tl, Tm, U, V, W, Xe, Y, Yb, Zn, and Zr compounds). Table 1 presents the data recommended by Codata; table 2 gives the minimum informations allowing the calculation of an equilibrium constant in first approximation; table 3 allows to take into consideration the thermal capacities. Finally, table 4 gathers the data relative to species in aqueous solution. (J.S.)

The NREL Biochemical and Thermochemical Ethanol Conversion Processes: Financial and Environmental Analysis Comparison

Directory of Open Access Journals (Sweden)

Jesse Sky Daystar

2015-07-01

Full Text Available The financial and environmental performance of the National Renewable Energy Lab’s (NREL thermochemical and biochemical biofuel conversion processes are examined herein with pine, eucalyptus, unmanaged hardwood, switchgrass, and sweet sorghum. The environmental impacts of the process scenarios were determined by quantifying greenhouse gas (GHG emissions and TRACI impacts. Integrated financial and environmental performance metrics were introduced and used to examine the biofuel production scenarios. The thermochemical and biochemical conversion processes produced the highest financial performance and lowest environmental impacts when paired with pine and sweet sorghum, respectively. The high ash content of switchgrass and high lignin content of loblolly pine lowered conversion yields, resulting in the highest environmental impacts and lowest financial performance for the thermochemical and biochemical conversion processes, respectively. Biofuel produced using the thermochemical conversion process resulted in lower TRACI single score impacts and somewhat lower GHG emissions per megajoule (MJ of fuel than using the biochemical conversion pathway. The cost of carbon mitigation resulting from biofuel production and corresponding government subsidies was determined to be higher than the expected market carbon price. In some scenarios, the cost of carbon mitigation was several times higher than the market carbon price, indicating that there may be other more cost-effective methods of reducing carbon emissions.

Issues in Benchmark Metric Selection

Science.gov (United States)

Crolotte, Alain

It is true that a metric can influence a benchmark but will esoteric metrics create more problems than they will solve? We answer this question affirmatively by examining the case of the TPC-D metric which used the much debated geometric mean for the single-stream test. We will show how a simple choice influenced the benchmark and its conduct and, to some extent, DBMS development. After examining other alternatives our conclusion is that the “real” measure for a decision-support benchmark is the arithmetic mean.

Robustness of climate metrics under climate policy ambiguity

International Nuclear Information System (INIS)

Ekholm, Tommi; Lindroos, Tomi J.; Savolainen, Ilkka

2013-01-01

Highlights: • We assess the economic impacts of using different climate metrics. • The setting is cost-efficient scenarios for three interpretations of the 2C target. • With each target setting, the optimal metric is different. • Therefore policy ambiguity prevents the selection of an optimal metric. • Robust metric values that perform well with multiple policy targets however exist. -- Abstract: A wide array of alternatives has been proposed as the common metrics with which to compare the climate impacts of different emission types. Different physical and economic metrics and their parameterizations give diverse weights between e.g. CH 4 and CO 2 , and fixing the metric from one perspective makes it sub-optimal from another. As the aims of global climate policy involve some degree of ambiguity, it is not possible to determine a metric that would be optimal and consistent with all policy aims. This paper evaluates the cost implications of using predetermined metrics in cost-efficient mitigation scenarios. Three formulations of the 2 °C target, including both deterministic and stochastic approaches, shared a wide range of metric values for CH 4 with which the mitigation costs are only slightly above the cost-optimal levels. Therefore, although ambiguity in current policy might prevent us from selecting an optimal metric, it can be possible to select robust metric values that perform well with multiple policy targets

Web metrics for library and information professionals

CERN Document Server

Stuart, David

2014-01-01

This is a practical guide to using web metrics to measure impact and demonstrate value. The web provides an opportunity to collect a host of different metrics, from those associated with social media accounts and websites to more traditional research outputs. This book is a clear guide for library and information professionals as to what web metrics are available and how to assess and use them to make informed decisions and demonstrate value. As individuals and organizations increasingly use the web in addition to traditional publishing avenues and formats, this book provides the tools to unlock web metrics and evaluate the impact of this content. The key topics covered include: bibliometrics, webometrics and web metrics; data collection tools; evaluating impact on the web; evaluating social media impact; investigating relationships between actors; exploring traditional publications in a new environment; web metrics and the web of data; the future of web metrics and the library and information professional.Th...

Partial rectangular metric spaces and fixed point theorems.

Science.gov (United States)

Shukla, Satish

2014-01-01

The purpose of this paper is to introduce the concept of partial rectangular metric spaces as a generalization of rectangular metric and partial metric spaces. Some properties of partial rectangular metric spaces and some fixed point results for quasitype contraction in partial rectangular metric spaces are proved. Some examples are given to illustrate the observed results.

A Kerr-NUT metric

International Nuclear Information System (INIS)

Vaidya, P.C.; Patel, L.K.; Bhatt, P.V.

1976-01-01

Using Galilean time and retarded distance as coordinates the usual Kerr metric is expressed in form similar to the Newman-Unti-Tamburino (NUT) metric. The combined Kerr-NUT metric is then investigated. In addition to the Kerr and NUT solutions of Einstein's equations, three other types of solutions are derived. These are (i) the radiating Kerr solution, (ii) the radiating NUT solution satisfying Rsub(ik) = sigmaxisub(i)xisub(k), xisub(i)xisup(i) = 0, and (iii) the associated Kerr solution satisfying Rsub(ik) = 0. Solution (i) is distinct from and simpler than the one reported earlier by Vaidya and Patel (Phys. Rev.; D7:3590 (1973)). Solutions (ii) and (iii) gave line elements which have the axis of symmetry as a singular line. (author)

Advanced energy sources and conversion techniques. Proceedings of a seminar. Volume 1. [35 papers

Energy Technology Data Exchange (ETDEWEB)

None

1958-11-01

The Seminar was organized as a series of tutorial presentations and round table discussions on a technical level to implement the following: (a) to identify and explore present and projected needs for energy sources and conversion techniques for military applications; (b) to exchange information on current and planned efforts in these fields; (c) to examine the effect of anticipated scientific and technological advances on these efforts; and (d) to present suggested programs aimed at satisfying the military needs for energy sources and conversion techniques. Volume I contains all of the unclassified papers presented at the Seminar. (W.D.M.)

Background metric in supergravity theories

International Nuclear Information System (INIS)

Yoneya, T.

1978-01-01

In supergravity theories, we investigate the conformal anomaly of the path-integral determinant and the problem of fermion zero modes in the presence of a nontrivial background metric. Except in SO(3) -invariant supergravity, there are nonvanishing conformal anomalies. As a consequence, amplitudes around the nontrivial background metric contain unpredictable arbitrariness. The fermion zero modes which are explicitly constructed for the Euclidean Schwarzschild metric are interpreted as an indication of the supersymmetric multiplet structure of a black hole. The degree of degeneracy of a black hole is 2/sup 4n/ in SO(n) supergravity

Daylight metrics and energy savings

Energy Technology Data Exchange (ETDEWEB)

Mardaljevic, John; Heschong, Lisa; Lee, Eleanor

2009-12-31

The drive towards sustainable, low-energy buildings has increased the need for simple, yet accurate methods to evaluate whether a daylit building meets minimum standards for energy and human comfort performance. Current metrics do not account for the temporal and spatial aspects of daylight, nor of occupants comfort or interventions. This paper reviews the historical basis of current compliance methods for achieving daylit buildings, proposes a technical basis for development of better metrics, and provides two case study examples to stimulate dialogue on how metrics can be applied in a practical, real-world context.

Designing Tomorrow: Bringing Our Own Chair… Leading the Conversations.

Science.gov (United States)

Beglinger, Joan Ellis

2016-12-01

A highly visible transition occurred earlier this year with the retirement of Pam Thompson, MS, RN, CENP, FAAN, from her role as CEO of the American Organization of Nurse Executives. Ms Thompson was always an advocate of promoting the voice of nursing. This month, the spotlight will shine on a team of nurse leaders who found their voice, got involved, and led the conversation. We will trace their journey as they analyzed their situation, applied the evidence, and used their seat at the table.

Pure E2 transitions: A test for BRICC Internal Conversion Coefficients

International Nuclear Information System (INIS)

Gerl, J.; Sai, K. Vijay; Sainath, M.; Gowrishankar, R.; Venkataramaniah, K.

2009-01-01

The most widely used theoretical internal conversion coefficient (ICC) tables are of Hager and Seltzer (HS), Rosel et al. and BRICC (Band et al. tables using BRICC interpolation code). A rigorous comparison of experimental ICCs with various theoretical tabulations is possible only when a large data on experimental ICCs is available at one place. For this reason, a compilation of all the available experimental ICCs, α T , α K , α L of E2 transitions for a number of elements in the range of 24≤Z≤94 is presented. Listing of experimental data includes 595 datasets corresponding to 505 E2 transitions in 165 nuclei across the nuclear chart. Data with less than 10% experimental uncertainty have been selected for comparison with the theoretical values of Hager and Seltzer, Rosel et al. and BRICC. The relative percentage deviation (%Δ) have been calculated for each of the above theories and the average (%Δ) are estimated. The Band et al. tables, using the BRICC interpolation code are seen to give theoretical ICCs closest to experimental values.

Metrics for energy resilience

International Nuclear Information System (INIS)

Roege, Paul E.; Collier, Zachary A.; Mancillas, James; McDonagh, John A.; Linkov, Igor

2014-01-01

Energy lies at the backbone of any advanced society and constitutes an essential prerequisite for economic growth, social order and national defense. However there is an Achilles heel to today's energy and technology relationship; namely a precarious intimacy between energy and the fiscal, social, and technical systems it supports. Recently, widespread and persistent disruptions in energy systems have highlighted the extent of this dependence and the vulnerability of increasingly optimized systems to changing conditions. Resilience is an emerging concept that offers to reconcile considerations of performance under dynamic environments and across multiple time frames by supplementing traditionally static system performance measures to consider behaviors under changing conditions and complex interactions among physical, information and human domains. This paper identifies metrics useful to implement guidance for energy-related planning, design, investment, and operation. Recommendations are presented using a matrix format to provide a structured and comprehensive framework of metrics relevant to a system's energy resilience. The study synthesizes previously proposed metrics and emergent resilience literature to provide a multi-dimensional model intended for use by leaders and practitioners as they transform our energy posture from one of stasis and reaction to one that is proactive and which fosters sustainable growth. - Highlights: • Resilience is the ability of a system to recover from adversity. • There is a need for methods to quantify and measure system resilience. • We developed a matrix-based approach to generate energy resilience metrics. • These metrics can be used in energy planning, system design, and operations

Balanced metrics for vector bundles and polarised manifolds

DEFF Research Database (Denmark)

Garcia Fernandez, Mario; Ross, Julius

2012-01-01

leads to a Hermitian-Einstein metric on E and a constant scalar curvature Kähler metric in c_1(L). For special values of α, limits of balanced metrics are solutions of a system of coupled equations relating a Hermitian-Einstein metric on E and a Kähler metric in c1(L). For this, we compute the top two......We consider a notion of balanced metrics for triples (X, L, E) which depend on a parameter α, where X is smooth complex manifold with an ample line bundle L and E is a holomorphic vector bundle over X. For generic choice of α, we prove that the limit of a convergent sequence of balanced metrics...

Piezoelectric ribbons printed onto rubber for flexible energy conversion.

Science.gov (United States)

Qi, Yi; Jafferis, Noah T; Lyons, Kenneth; Lee, Christine M; Ahmad, Habib; McAlpine, Michael C

2010-02-10

The development of a method for integrating highly efficient energy conversion materials onto stretchable, biocompatible rubbers could yield breakthroughs in implantable or wearable energy harvesting systems. Being electromechanically coupled, piezoelectric crystals represent a particularly interesting subset of smart materials that function as sensors/actuators, bioMEMS devices, and energy converters. Yet, the crystallization of these materials generally requires high temperatures for maximally efficient performance, rendering them incompatible with temperature-sensitive plastics and rubbers. Here, we overcome these limitations by presenting a scalable and parallel process for transferring crystalline piezoelectric nanothick ribbons of lead zirconate titanate from host substrates onto flexible rubbers over macroscopic areas. Fundamental characterization of the ribbons by piezo-force microscopy indicates that their electromechanical energy conversion metrics are among the highest reported on a flexible medium. The excellent performance of the piezo-ribbon assemblies coupled with stretchable, biocompatible rubber may enable a host of exciting avenues in fundamental research and novel applications.

The metrics of science and technology

CERN Document Server

Geisler, Eliezer

2000-01-01

Dr. Geisler's far-reaching, unique book provides an encyclopedic compilation of the key metrics to measure and evaluate the impact of science and technology on academia, industry, and government. Focusing on such items as economic measures, patents, peer review, and other criteria, and supported by an extensive review of the literature, Dr. Geisler gives a thorough analysis of the strengths and weaknesses inherent in metric design, and in the use of the specific metrics he cites. His book has already received prepublication attention, and will prove especially valuable for academics in technology management, engineering, and science policy; industrial R&D executives and policymakers; government science and technology policymakers; and scientists and managers in government research and technology institutions. Geisler maintains that the application of metrics to evaluate science and technology at all levels illustrates the variety of tools we currently possess. Each metric has its own unique strengths and...

Extending cosmology: the metric approach

OpenAIRE

Mendoza, S.

2012-01-01

Comment: 2012, Extending Cosmology: The Metric Approach, Open Questions in Cosmology; Review article for an Intech "Open questions in cosmology" book chapter (19 pages, 3 figures). Available from: http://www.intechopen.com/books/open-questions-in-cosmology/extending-cosmology-the-metric-approach

Metrics, Media and Advertisers: Discussing Relationship

Directory of Open Access Journals (Sweden)

Marco Aurelio de Souza Rodrigues

2014-11-01

Full Text Available This study investigates how Brazilian advertisers are adapting to new media and its attention metrics. In-depth interviews were conducted with advertisers in 2009 and 2011. In 2009, new media and its metrics were celebrated as innovations that would increase advertising campaigns overall efficiency. In 2011, this perception has changed: New media’s profusion of metrics, once seen as an advantage, started to compromise its ease of use and adoption. Among its findings, this study argues that there is an opportunity for media groups willing to shift from a product-focused strategy towards a customer-centric one, through the creation of new, simple and integrative metrics. 

Measuring Information Security: Guidelines to Build Metrics

Science.gov (United States)

von Faber, Eberhard

Measuring information security is a genuine interest of security managers. With metrics they can develop their security organization's visibility and standing within the enterprise or public authority as a whole. Organizations using information technology need to use security metrics. Despite the clear demands and advantages, security metrics are often poorly developed or ineffective parameters are collected and analysed. This paper describes best practices for the development of security metrics. First attention is drawn to motivation showing both requirements and benefits. The main body of this paper lists things which need to be observed (characteristic of metrics), things which can be measured (how measurements can be conducted) and steps for the development and implementation of metrics (procedures and planning). Analysis and communication is also key when using security metrics. Examples are also given in order to develop a better understanding. The author wants to resume, continue and develop the discussion about a topic which is or increasingly will be a critical factor of success for any security managers in larger organizations.

Economics of natural gas conversion processes

International Nuclear Information System (INIS)

Gradassi, M.J.; Green, N.W.

1995-01-01

This paper examines the potential profitability of a selected group of possible natural gas conversion processes from the perspective of a manufacturing entity that has access to substantial low cost natural gas reserves, capital to invest, and no allegiance to any particular product. The analysis uses the revenues and costs of conventional methanol technology as a framework to evaluate the economics of the alternative technologies. Capital requirements and the potential to enhance cash margins are the primary focus of the analysis. The basis of the analysis is a world-scale conventional methanol plant that converts 3.2 Mm 3 per day (120 MMSCFD) of natural gas into 3510 metric tonnes (3869 shorts tons) per day of methanol. Capital and operating costs are for an arbitrary remote location where natural gas is available at 0.47 US dollars per GJ (0.50 US dollars per MMBtu). Other costs include ocean freight to deliver the product to market at a US Gulf Coast location. Payout time, which is the ratio of the total capital investment to cash margin (revenue less total operating expenses), is the economic indicator for the analysis. Under these conditions, the payout time for the methanol plant is seven years. The payout time for the alternative natural gas conversion technologies is generally much higher, which indicates that they currently are not candidates for commercialization without consideration of special incentives. The analysis also includes an evaluation of the effects of process yields on the economics of two potential technologies, oxidative coupling to ethylene and direct conversion to methanol. This analysis suggests areas for research focus that might improve the profitability of natural gas conversion. 29 refs., 14 figs., 5 tabs

Active Metric Learning for Supervised Classification

OpenAIRE

Kumaran, Krishnan; Papageorgiou, Dimitri; Chang, Yutong; Li, Minhan; Takáč, Martin

2018-01-01

Clustering and classification critically rely on distance metrics that provide meaningful comparisons between data points. We present mixed-integer optimization approaches to find optimal distance metrics that generalize the Mahalanobis metric extensively studied in the literature. Additionally, we generalize and improve upon leading methods by removing reliance on pre-designated "target neighbors," "triplets," and "similarity pairs." Another salient feature of our method is its ability to en...

Decision table languages and systems

CERN Document Server

Metzner, John R

1977-01-01

ACM Monograph Series: Decision Table Languages and Systems focuses on linguistic examination of decision tables and survey of the features of existing decision table languages and systems. The book first offers information on semiotics, programming language features, and generalization. Discussions focus on semantic broadening, outer language enrichments, generalization of syntax, limitations, implementation improvements, syntactic and semantic features, decision table syntax, semantics of decision table languages, and decision table programming languages. The text then elaborates on design im

Multimetric indices: How many metrics?

Science.gov (United States)

Multimetric indices (MMI’s) often include 5 to 15 metrics, each representing a different attribute of assemblage condition, such as species diversity, tolerant taxa, and nonnative taxa. Is there an optimal number of metrics for MMIs? To explore this question, I created 1000 9-met...

The Standard Model

Science.gov (United States)

Burgess, Cliff; Moore, Guy

2012-04-01

List of illustrations; List of tables; Preface; Acknowledgments; Part I. Theoretical Framework: 1. Field theory review; 2. The standard model: general features; 3. Cross sections and lifetimes; Part II. Applications: Leptons: 4. Elementary boson decays; 5. Leptonic weak interactions: decays; 6. Leptonic weak interactions: collisions; 7. Effective Lagrangians; Part III. Applications: Hadrons: 8. Hadrons and QCD; 9. Hadronic interactions; Part IV. Beyond the Standard Model: 10. Neutrino masses; 11. Open questions, proposed solutions; Appendix A. Experimental values for the parameters; Appendix B. Symmetries and group theory review; Appendix C. Lorentz group and the Dirac algebra; Appendix D. ξ-gauge Feynman rules; Appendix E. Metric convention conversion table; Select bibliography; Index.

MCNPX Model/Table Comparison

International Nuclear Information System (INIS)

Hendricks, J.S.

2003-01-01

MCNPX is a Monte Carlo N-Particle radiation transport code extending the capabilities of MCNP4C. As with MCNP, MCNPX uses nuclear data tables to transport neutrons, photons, and electrons. Unlike MCNP, MCNPX also uses (1) nuclear data tables to transport protons; (2) physics models to transport 30 additional particle types (deuterons, tritons, alphas, pions, muons, etc.); and (3) physics models to transport neutrons and protons when no tabular data are available or when the data are above the energy range (20 to 150 MeV) where the data tables end. MCNPX can mix and match data tables and physics models throughout a problem. For example, MCNPX can model neutron transport in a bismuth germinate (BGO) particle detector by using data tables for bismuth and oxygen and using physics models for germanium. Also, MCNPX can model neutron transport in UO 2 , making the best use of physics models and data tables: below 20 MeV, data tables are used; above 150 MeV, physics models are used; between 20 and 150 MeV, data tables are used for oxygen and models are used for uranium. The mix-and-match capability became available with MCNPX2.5.b (November 2002). For the first time, we present here comparisons that calculate radiation transport in materials with various combinations of data charts and model physics. The physics models are poor at low energies (<150 MeV); thus, data tables should be used when available. Our comparisons demonstrate the importance of the mix-and-match capability and indicate how well physics models work in the absence of data tables

Metrics for Polyphonic Sound Event Detection

Directory of Open Access Journals (Sweden)

Annamaria Mesaros

2016-05-01

Full Text Available This paper presents and discusses various metrics proposed for evaluation of polyphonic sound event detection systems used in realistic situations where there are typically multiple sound sources active simultaneously. The system output in this case contains overlapping events, marked as multiple sounds detected as being active at the same time. The polyphonic system output requires a suitable procedure for evaluation against a reference. Metrics from neighboring fields such as speech recognition and speaker diarization can be used, but they need to be partially redefined to deal with the overlapping events. We present a review of the most common metrics in the field and the way they are adapted and interpreted in the polyphonic case. We discuss segment-based and event-based definitions of each metric and explain the consequences of instance-based and class-based averaging using a case study. In parallel, we provide a toolbox containing implementations of presented metrics.

MCNPX Model/Table Comparison

CERN Document Server

Hendricks, J S

2003-01-01

MCNPX is a Monte Carlo N-Particle radiation transport code extending the capabilities of MCNP4C. As with MCNP, MCNPX uses nuclear data tables to transport neutrons, photons, and electrons. Unlike MCNP, MCNPX also uses (1) nuclear data tables to transport protons; (2) physics models to transport 30 additional particle types (deuterons, tritons, alphas, pions, muons, etc.); and (3) physics models to transport neutrons and protons when no tabular data are available or when the data are above the energy range (20 to 150 MeV) where the data tables end. MCNPX can mix and match data tables and physics models throughout a problem. For example, MCNPX can model neutron transport in a bismuth germinate (BGO) particle detector by using data tables for bismuth and oxygen and using physics models for germanium. Also, MCNPX can model neutron transport in UO sub 2 , making the best use of physics models and data tables: below 20 MeV, data tables are used; above 150 MeV, physics models are used; between 20 and 150 MeV, data t...

Robustness Metrics: Consolidating the multiple approaches to quantify Robustness

DEFF Research Database (Denmark)

Göhler, Simon Moritz; Eifler, Tobias; Howard, Thomas J.

2016-01-01

robustness metrics; 3) Functional expectancy and dispersion robustness metrics; and 4) Probability of conformance robustness metrics. The goal was to give a comprehensive overview of robustness metrics and guidance to scholars and practitioners to understand the different types of robustness metrics...

Common Metrics for Human-Robot Interaction

Science.gov (United States)

Steinfeld, Aaron; Lewis, Michael; Fong, Terrence; Scholtz, Jean; Schultz, Alan; Kaber, David; Goodrich, Michael

2006-01-01

This paper describes an effort to identify common metrics for task-oriented human-robot interaction (HRI). We begin by discussing the need for a toolkit of HRI metrics. We then describe the framework of our work and identify important biasing factors that must be taken into consideration. Finally, we present suggested common metrics for standardization and a case study. Preparation of a larger, more detailed toolkit is in progress.

Monopole conversion hidden by penetration effect in magnetic dipole transitions

International Nuclear Information System (INIS)

Bikit, I.; Anichin, I.; Marinkov, L.

1977-01-01

The 191 keV 197 Au nad 340 keV 233 U transitions are investigated and the effect of penetration into the M1-component is accounted for. Theoretical internal conversion coefficients (ICC) and electron parameters to account for the penetration effect have been obtained by interpolating the data of the Hager and Zeltzer tables. The ICC values and ratios are analyzed under the assumption that the 191 keV 197 Au transition has multipolarities M1 + E2 and E 0 +M1. A common overlapping occurs when the nuclear penetration parameter lambda for magnetic dipole transition is lambda = 34.2+-2.2. For the 340 keV 233 U transition the ICC has been found to equal αk=0.69+-0.07, and the relative conversion-line intensities have been determined. It is concluded that the 191 keV 197 Au nad 340 keV 233 U transitions involve an electric monopole component concealed by the penetration effect in the M1-conversion. The matrix elements of the E0-transition have been evaluated

Narrowing the Gap Between QoS Metrics and Web QoE Using Above-the-fold Metrics

OpenAIRE

da Hora, Diego Neves; Asrese, Alemnew; Christophides, Vassilis; Teixeira, Renata; Rossi, Dario

2018-01-01

International audience; Page load time (PLT) is still the most common application Quality of Service (QoS) metric to estimate the Quality of Experience (QoE) of Web users. Yet, recent literature abounds with proposals for alternative metrics (e.g., Above The Fold, SpeedIndex and variants) that aim at better estimating user QoE. The main purpose of this work is thus to thoroughly investigate a mapping between established and recently proposed objective metrics and user QoE. We obtain ground tr...

Factor structure of the Tomimatsu-Sato metrics

International Nuclear Information System (INIS)

Perjes, Z.

1989-02-01

Based on an earlier result stating that δ = 3 Tomimatsu-Sato (TS) metrics can be factored over the field of integers, an analogous representation for higher TS metrics was sought. It is shown that the factoring property of TS metrics follows from the structure of special Hankel determinants. A set of linear algebraic equations determining the factors was defined, and the factors of the first five TS metrics were tabulated, together with their primitive factors. (R.P.) 4 refs.; 2 tabs

ST-intuitionistic fuzzy metric space with properties

Science.gov (United States)

Arora, Sahil; Kumar, Tanuj

2017-07-01

In this paper, we define ST-intuitionistic fuzzy metric space and the notion of convergence and completeness properties of cauchy sequences is studied. Further, we prove some properties of ST-intuitionistic fuzzy metric space. Finally, we introduce the concept of symmetric ST Intuitionistic Fuzzy metric space.

Catalytic Conversion of Carbohydrates to Initial Platform Chemicals: Chemistry and Sustainability.

Science.gov (United States)

Mika, László T; Cséfalvay, Edit; Németh, Áron

2018-01-24

The replacement of fossil resources that currently provide more than 90% of our energy needs and feedstocks of the chemical industry in combination with reduced emission of carbon dioxide is one of the most pressing challenges of mankind. Biomass as a globally available resource has been proposed as an alternative feedstock for production of basic building blocks, which could partially or even fully replace the currently utilized fossil-based ones in well-established chemical processes. The destruction of lignocellulosic feed followed by oxygen removal from its cellulose and hemicellulose content by catalytic processes results in the formation of initial platform chemicals (IPCs). However, their sustainable production strongly depends on the availability of resources, their efficient or even industrially viable conversion processes, and replenishment time of feedstocks. Herein, we overview recent advances and developments in catalytic transformations of the carbohydrate content of lignocellulosic biomass to IPCs (i.e., ethanol, 3-hydroxypropionic acid, isoprene, succinic and levulinic acids, furfural, and 5-hydroxymethylfurfural). The mechanistic aspects, development of new catalysts, different efficiency indicators (yield and selectivity), and conversion conditions of their production are presented and compared. The potential biochemical production routes utilizing recently engineered microorganisms are reviewed, as well. The sustainability metrics that could be applied to the chemical industry (individual set of sustainability indicators, composite indices methods, material and energy flow analysis-based metrics, and ethanol equivalents) are also overviewed as well as an outlook is provided to highlight challenges and opportunities associated with this huge research area.

Rate and Predictors of the Conversion of Abstracts Presented at the Canadian Cardiovascular Congress Scientific Meetings to Full Peer-Reviewed Publications

DEFF Research Database (Denmark)

Abuzeid, Wael; Fosbøl, Emil Loldrup; Fosbøl, Philip Loldrup

2013-01-01

The rate of conversion of abstracts presented at scientific meetings into peer-reviewed published manuscripts is an important metric for medical societies, because it facilitates translation of scientific knowledge into practice. We determined the rate and predictors of conversion of scientific...... abstracts presented at the Canadian Cardiovascular Congress (CCC) from 2006 to 2010 into peer-reviewed article publications within 2 years of their initial presentation. Using a previously validated computer algorithm, we searched the International Statistical Institute Web of Science to identify peer...

Life cycle energy metrics and CO 2 credit analysis of a hybrid photovoltaic/thermal greenhouse dryer

OpenAIRE

P. Barnwal; G. N. Tiwari

2008-01-01

In this paper, life cycle energy metrics, such as energy payback time (EPBT), energy production factor (EPF) and life cycle conversion efficiency (LCCE), and mitigation of CO 2 emissions for a hybrid photovoltaic/thermal (PV/T) greenhouse dryer have been analyzed. The hybrid PV/T greenhouse (roof type even span) dryer, designed and constructed at Solar Energy Park, Indian Institute of Technology, New Delhi (28°35′N, 77°12′E, 216 m above MSL), India, has a 2.50 m × 2.60 m floor area, 1.80 m ce...

Energy metrics of photovoltaic/thermal and earth air heat exchanger integrated greenhouse for different climatic conditions of India

Energy Technology Data Exchange (ETDEWEB)

Nayak, Sujata; Tiwari, G.N. [Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India)

2010-10-15

In this paper, a study is carried out to evaluate the annual thermal and exergy performance of a photovoltaic/thermal (PV/T) and earth air heat exchanger (EAHE) system, integrated with a greenhouse, located at IIT Delhi, India, for different climatic conditions of Srinagar, Mumbai, Jodhpur, New Delhi and Bangalore. A comparison is made of various energy metrics, such as energy payback time (EPBT), electricity production factor (EPF) and life cycle conversion efficiency (LCCE) of the system by considering four weather conditions (a-d type) for five climatic zones. The embodied energy and annual energy outputs have been used for evaluation of the energy metrics. The annual overall thermal energy, annual electrical energy savings and annual exergy was found to be best for the climatic condition of Jodhpur at 29,156.8 kWh, 1185 kWh and 1366.4 kWh, respectively when compared with other weather stations covered in the study, due to higher solar intensity I and sunshine hours, and is lowest for Srinagar station. The results also showed that energy payback time for Jodhpur station is lowest at 16.7 years and highest for Srinagar station at 21.6 years. Electricity production factor (EPF) is highest for Jodhpur, i.e. 2.04 and Life cycle conversion efficiency (LCCE) is highest for Srinagar station. It is also observed that LCCE increases with increase in life cycle. (author)

Pragmatic security metrics applying metametrics to information security

CERN Document Server

Brotby, W Krag

2013-01-01

Other books on information security metrics discuss number theory and statistics in academic terms. Light on mathematics and heavy on utility, PRAGMATIC Security Metrics: Applying Metametrics to Information Security breaks the mold. This is the ultimate how-to-do-it guide for security metrics.Packed with time-saving tips, the book offers easy-to-follow guidance for those struggling with security metrics. Step by step, it clearly explains how to specify, develop, use, and maintain an information security measurement system (a comprehensive suite of metrics) to

Defining a Progress Metric for CERT RMM Improvement

Science.gov (United States)

2017-09-14

REV-03.18.2016.0 Defining a Progress Metric for CERT-RMM Improvement Gregory Crabb Nader Mehravari David Tobar September 2017 TECHNICAL ...fendable resource allocation decisions. Technical metrics measure aspects of controls implemented through technology (systems, soft- ware, hardware...implementation metric would be the percentage of users who have received anti-phishing training . • Effectiveness/efficiency metrics measure whether

IT Project Management Metrics

Directory of Open Access Journals (Sweden)

2007-01-01

Full Text Available Many software and IT projects fail in completing theirs objectives because different causes of which the management of the projects has a high weight. In order to have successfully projects, lessons learned have to be used, historical data to be collected and metrics and indicators have to be computed and used to compare them with past projects and avoid failure to happen. This paper presents some metrics that can be used for the IT project management.

Mass Customization Measurements Metrics

DEFF Research Database (Denmark)

Nielsen, Kjeld; Brunø, Thomas Ditlev; Jørgensen, Kaj Asbjørn

2014-01-01

A recent survey has indicated that 17 % of companies have ceased mass customizing less than 1 year after initiating the effort. This paper presents measurement for a company’s mass customization performance, utilizing metrics within the three fundamental capabilities: robust process design, choice...... navigation, and solution space development. A mass customizer when assessing performance with these metrics can identify within which areas improvement would increase competitiveness the most and enable more efficient transition to mass customization....

Metrical Phonology: German Sound System.

Science.gov (United States)

Tice, Bradley S.

Metrical phonology, a linguistic process of phonological stress assessment and diagrammatic simplification of sentence and word stress, is discussed as it is found in the English and German languages. The objective is to promote use of metrical phonology as a tool for enhancing instruction in stress patterns in words and sentences, particularly in…

Construction of Einstein-Sasaki metrics in D≥7

International Nuclear Information System (INIS)

Lue, H.; Pope, C. N.; Vazquez-Poritz, J. F.

2007-01-01

We construct explicit Einstein-Kaehler metrics in all even dimensions D=2n+4≥6, in terms of a 2n-dimensional Einstein-Kaehler base metric. These are cohomogeneity 2 metrics which have the new feature of including a NUT-type parameter, or gravomagnetic charge, in addition to..' in addition to mass and rotation parameters. Using a canonical construction, these metrics all yield Einstein-Sasaki metrics in dimensions D=2n+5≥7. As is commonly the case in this type of construction, for suitable choices of the free parameters the Einstein-Sasaki metrics can extend smoothly onto complete and nonsingular manifolds, even though the underlying Einstein-Kaehler metric has conical singularities. We discuss some explicit examples in the case of seven-dimensional Einstein-Sasaki spaces. These new spaces can provide supersymmetric backgrounds in M theory, which play a role in the AdS 4 /CFT 3 correspondence

National Metrical Types in Nineteenth Century Art Song

Directory of Open Access Journals (Sweden)

Leigh VanHandel

2010-01-01

Full Text Available William Rothstein’s article “National metrical types in music of the eighteenth and early nineteenth centuries” (2008 proposes a distinction between the metrical habits of 18th and early 19th century German music and those of Italian and French music of that period. Based on theoretical treatises and compositional practice, he outlines these national metrical types and discusses the characteristics of each type. This paper presents the results of a study designed to determine whether, and to what degree, Rothstein’s characterizations of national metrical types are present in 19th century French and German art song. Studying metrical habits in this genre may provide a lens into changing metrical conceptions of 19th century theorists and composers, as well as to the metrical habits and compositional style of individual 19th century French and German art song composers.

A Metric on Phylogenetic Tree Shapes.

Science.gov (United States)

Colijn, C; Plazzotta, G

2018-01-01

The shapes of evolutionary trees are influenced by the nature of the evolutionary process but comparisons of trees from different processes are hindered by the challenge of completely describing tree shape. We present a full characterization of the shapes of rooted branching trees in a form that lends itself to natural tree comparisons. We use this characterization to define a metric, in the sense of a true distance function, on tree shapes. The metric distinguishes trees from random models known to produce different tree shapes. It separates trees derived from tropical versus USA influenza A sequences, which reflect the differing epidemiology of tropical and seasonal flu. We describe several metrics based on the same core characterization, and illustrate how to extend the metric to incorporate trees' branch lengths or other features such as overall imbalance. Our approach allows us to construct addition and multiplication on trees, and to create a convex metric on tree shapes which formally allows computation of average tree shapes. © The Author(s) 2017. Published by Oxford University Press, on behalf of the Society of Systematic Biologists.

Software Quality Assurance Metrics

Science.gov (United States)

McRae, Kalindra A.

2004-01-01

Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

SU-F-I-24: Feasibility of Magnetic Susceptibility to Relative Electron Density Conversion Method for Radiation Therapy

Energy Technology Data Exchange (ETDEWEB)

Ito, K; Kadoya, N; Chiba, M; Matsushita, H; Jingu, K [Tohoku University Graduate School of Medicine, Sendai, Miyagi (Japan); Sato, K; Nagasaka, T; Yamanaka, K [Tohoku University Hospital, Sendai, Miyagi (Japan); Dobashi, S; Takeda, K [Tohoku University, Sendai, Miyagi (Japan)

2016-06-15

Purpose: The aim of this study is to develop radiation treatment planning using magnetic susceptibility obtained from quantitative susceptibility mapping (QSM) via MR imaging. This study demonstrates the feasibility of a method for generating a substitute for a CT image from an MRI. Methods: The head of a healthy volunteer was scanned using a CT scanner and a 3.0 T MRI scanner. The CT imaging was performed with a slice thickness of 2.5 mm at 80 and 120 kV (dual-energy scan). These CT images were converted to relative electron density (rED) using the CT-rED conversion table generated by a previous dual-energy CT scan. The CT-rED conversion table was generated using the conversion of the energy-subtracted CT number to rED via a single linear relationship. One T2 star-weighted 3D gradient echo-based sequence with four different echo times images was acquired using the MRI scanner. These T2 star-weighted images were used to estimate the phase data. To estimate the local field map, a Laplacian unwrapping of the phase and background field removal algorithm were implemented to process phase data. To generate a magnetic susceptibility map from the local field map, we used morphology enabled dipole inversion method. The rED map was resampled to the same resolution as magnetic susceptibility, and the magnetic susceptibility-rED conversion table was obtained via voxel-by-voxel mapping between the magnetic susceptibility and rED maps. Results: A correlation between magnetic susceptibility and rED is not observed through our method. Conclusion: Our results show that the correlation between magnetic susceptibility and rED is not observed. As the next step, we assume that the voxel of the magnetic susceptibility map comprises two materials, such as water (0 ppm) and bone (-2.2 ppm) or water and marrow (0.81ppm). The elements of each voxel were estimated from the ratio of the two materials.

Conversations cruciales des outils pour s'exprimer quand les enjeux sont de taille

CERN Document Server

Patterson, Kerry; McMillan, Ron; Switzler, Al; Covey, Stephen R

2009-01-01

Quand on parle de " conversations cruciales ", il nous vient spontanément des images de présidents, d'empereurs et de Premiers ministres assis autour d'une table massive en train de débattre de l'avenir du monde. Les conversations dont parle cet ouvrage ne sont pas moins cruciales, nous concernent tous et peuvent survenir à n'importe quel moment dans notre vie quotidienne. Une discussion houleuse avec le patron, une dispute violente avec un collègue ou un client, un mot de trop adressé à notre conjoint, etc. Une conversation devient cruciale quand : les opinions en jeu sont opposées ; les enjeux sont importants ; les émotions sont fortes. Ce livre vous aide à vous exprimer habilement quand les enjeux sont de taille. Il vous explique comment atteindre le but que vous vous êtes fixé en usant des meilleures techniques et en ouvrant le chemin du dialogue. Il vous fournit les outils pour gérer les conversations les plus difficiles et les plus importantes de votre vie.

Degraded visual environment image/video quality metrics

Science.gov (United States)

Baumgartner, Dustin D.; Brown, Jeremy B.; Jacobs, Eddie L.; Schachter, Bruce J.

2014-06-01

A number of image quality metrics (IQMs) and video quality metrics (VQMs) have been proposed in the literature for evaluating techniques and systems for mitigating degraded visual environments. Some require both pristine and corrupted imagery. Others require patterned target boards in the scene. None of these metrics relates well to the task of landing a helicopter in conditions such as a brownout dust cloud. We have developed and used a variety of IQMs and VQMs related to the pilot's ability to detect hazards in the scene and to maintain situational awareness. Some of these metrics can be made agnostic to sensor type. Not only are the metrics suitable for evaluating algorithm and sensor variation, they are also suitable for choosing the most cost effective solution to improve operating conditions in degraded visual environments.

The Jacobi metric for timelike geodesics in static spacetimes

Science.gov (United States)

Gibbons, G. W.

2016-01-01

It is shown that the free motion of massive particles moving in static spacetimes is given by the geodesics of an energy-dependent Riemannian metric on the spatial sections analogous to Jacobi's metric in classical dynamics. In the massless limit Jacobi's metric coincides with the energy independent Fermat or optical metric. For stationary metrics, it is known that the motion of massless particles is given by the geodesics of an energy independent Finslerian metric of Randers type. The motion of massive particles is governed by neither a Riemannian nor a Finslerian metric. The properies of the Jacobi metric for massive particles moving outside the horizon of a Schwarschild black hole are described. By constrast with the massless case, the Gaussian curvature of the equatorial sections is not always negative.

Relaxed metrics and indistinguishability operators: the relationship

Energy Technology Data Exchange (ETDEWEB)

Martin, J.

2017-07-01

In 1982, the notion of indistinguishability operator was introduced by E. Trillas in order to fuzzify the crisp notion of equivalence relation (/cite{Trillas}). In the study of such a class of operators, an outstanding property must be pointed out. Concretely, there exists a duality relationship between indistinguishability operators and metrics. The aforesaid relationship was deeply studied by several authors that introduced a few techniques to generate metrics from indistinguishability operators and vice-versa (see, for instance, /cite{BaetsMesiar,BaetsMesiar2}). In the last years a new generalization of the metric notion has been introduced in the literature with the purpose of developing mathematical tools for quantitative models in Computer Science and Artificial Intelligence (/cite{BKMatthews,Ma}). The aforementioned generalized metrics are known as relaxed metrics. The main target of this talk is to present a study of the duality relationship between indistinguishability operators and relaxed metrics in such a way that the aforementioned classical techniques to generate both concepts, one from the other, can be extended to the new framework. (Author)

Classification in medical images using adaptive metric k-NN

Science.gov (United States)

Chen, C.; Chernoff, K.; Karemore, G.; Lo, P.; Nielsen, M.; Lauze, F.

2010-03-01

The performance of the k-nearest neighborhoods (k-NN) classifier is highly dependent on the distance metric used to identify the k nearest neighbors of the query points. The standard Euclidean distance is commonly used in practice. This paper investigates the performance of k-NN classifier with respect to different adaptive metrics in the context of medical imaging. We propose using adaptive metrics such that the structure of the data is better described, introducing some unsupervised learning knowledge in k-NN. We investigated four different metrics are estimated: a theoretical metric based on the assumption that images are drawn from Brownian Image Model (BIM), the normalized metric based on variance of the data, the empirical metric is based on the empirical covariance matrix of the unlabeled data, and an optimized metric obtained by minimizing the classification error. The spectral structure of the empirical covariance also leads to Principal Component Analysis (PCA) performed on it which results the subspace metrics. The metrics are evaluated on two data sets: lateral X-rays of the lumbar aortic/spine region, where we use k-NN for performing abdominal aorta calcification detection; and mammograms, where we use k-NN for breast cancer risk assessment. The results show that appropriate choice of metric can improve classification.

Periodic Table of Students.

Science.gov (United States)

Johnson, Mike

1998-01-01

Presents an exercise in which an eighth-grade science teacher decorated the classroom with a periodic table of students. Student photographs were arranged according to similarities into vertical columns. Students were each assigned an atomic number according to their placement in the table. The table is then used to teach students about…

Measurable Control System Security through Ideal Driven Technical Metrics

Energy Technology Data Exchange (ETDEWEB)

Miles McQueen; Wayne Boyer; Sean McBride; Marie Farrar; Zachary Tudor

2008-01-01

The Department of Homeland Security National Cyber Security Division supported development of a small set of security ideals as a framework to establish measurable control systems security. Based on these ideals, a draft set of proposed technical metrics was developed to allow control systems owner-operators to track improvements or degradations in their individual control systems security posture. The technical metrics development effort included review and evaluation of over thirty metrics-related documents. On the bases of complexity, ambiguity, or misleading and distorting effects the metrics identified during the reviews were determined to be weaker than necessary to aid defense against the myriad threats posed by cyber-terrorism to human safety, as well as to economic prosperity. Using the results of our metrics review and the set of security ideals as a starting point for metrics development, we identified thirteen potential technical metrics - with at least one metric supporting each ideal. Two case study applications of the ideals and thirteen metrics to control systems were then performed to establish potential difficulties in applying both the ideals and the metrics. The case studies resulted in no changes to the ideals, and only a few deletions and refinements to the thirteen potential metrics. This led to a final proposed set of ten core technical metrics. To further validate the security ideals, the modifications made to the original thirteen potential metrics, and the final proposed set of ten core metrics, seven separate control systems security assessments performed over the past three years were reviewed for findings and recommended mitigations. These findings and mitigations were then mapped to the security ideals and metrics to assess gaps in their coverage. The mappings indicated that there are no gaps in the security ideals and that the ten core technical metrics provide significant coverage of standard security issues with 87% coverage. Based

Experiential space is hardly metric

Czech Academy of Sciences Publication Activity Database

Šikl, Radovan; Šimeček, Michal; Lukavský, Jiří

2008-01-01

Roč. 2008, č. 37 (2008), s. 58-58 ISSN 0301-0066. [European Conference on Visual Perception. 24.08-28.08.2008, Utrecht] R&D Projects: GA ČR GA406/07/1676 Institutional research plan: CEZ:AV0Z70250504 Keywords : visual space perception * metric and non-metric perceptual judgments * ecological validity Subject RIV: AN - Psychology

High resolution metric imaging payload

Science.gov (United States)

Delclaud, Y.

2017-11-01

Alcatel Space Industries has become Europe's leader in the field of high and very high resolution optical payloads, in the frame work of earth observation system able to provide military government with metric images from space. This leadership allowed ALCATEL to propose for the export market, within a French collaboration frame, a complete space based system for metric observation.

Exergy metrication of radiant panel heating and cooling with heat pumps

International Nuclear Information System (INIS)

Kilkis, Birol

2012-01-01

Highlights: ► Rational Exergy Management Model analytically relates heat pumps and radiant panels. ► Heat pumps driven by wind energy perform better with radiantpanels. ► Better CO 2 mitigation is possible with wind turbine, heat pump, radiant panel combination. ► Energy savings and thermo-mechanical performance are directly linked to CO 2 emissions. - Abstract: Radiant panels are known to be energy efficient sensible heating and cooling systems and a suitable fit for low-exergy buildings. This paper points out the little known fact that this may not necessarily be true unless their low-exergy demand is matched with low-exergy waste and alternative energy resources. In order to further investigate and metricate this condition and shed more light on this issue for different types of energy resources and energy conversion systems coupled to radiant panels, a new engineering metric was developed. Using this metric, which is based on the Rational Exergy Management Model, true potential and benefits of radiant panels coupled to ground-source heat pumps were analyzed. Results provide a new perspective in identifying the actual benefits of heat pump technology in curbing CO 2 emissions and also refer to IEA Annex 49 findings for low-exergy buildings. Case studies regarding different scenarios are compared with a base case, which comprises a radiant panel system connected to a natural gas-fired condensing boiler in heating and a grid power-driven chiller in cooling. Results show that there is a substantial CO 2 emission reduction potential if radiant panels are optimally operated with ground-source heat pumps driven by renewable energy sources, or optimally matched with combined heat and power systems, preferably running on alternative fuels.

Elementary Statistics Tables

CERN Document Server

Neave, Henry R

2012-01-01

This book, designed for students taking a basic introductory course in statistical analysis, is far more than just a book of tables. Each table is accompanied by a careful but concise explanation and useful worked examples. Requiring little mathematical background, Elementary Statistics Tables is thus not just a reference book but a positive and user-friendly teaching and learning aid. The new edition contains a new and comprehensive "teach-yourself" section on a simple but powerful approach, now well-known in parts of industry but less so in academia, to analysing and interpreting process dat

Empirical yield tables for Minnesota.

Science.gov (United States)

Jerold T. Hahn; Gerhard K. Raile

1982-01-01

Describes the tables derived from the 1977 Forest Survey of Minnesota and presents examples of how the tables can be used. These tables are broken down according to Minnesota's four Forest Survey Units, 14 forest types, and 5 site index classes. Presents 210 of the 350 possible tables that contained sufficient data to justify publication.

Smart Grid Status and Metrics Report Appendices

Energy Technology Data Exchange (ETDEWEB)

Balducci, Patrick J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Antonopoulos, Chrissi A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Clements, Samuel L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gorrissen, Willy J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kirkham, Harold [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ruiz, Kathleen A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smith, David L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Weimar, Mark R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gardner, Chris [APQC, Houston, TX (United States); Varney, Jeff [APQC, Houston, TX (United States)

2014-07-01

A smart grid uses digital power control and communication technology to improve the reliability, security, flexibility, and efficiency of the electric system, from large generation through the delivery systems to electricity consumers and a growing number of distributed generation and storage resources. To convey progress made in achieving the vision of a smart grid, this report uses a set of six characteristics derived from the National Energy Technology Laboratory Modern Grid Strategy. The Smart Grid Status and Metrics Report defines and examines 21 metrics that collectively provide insight into the grid’s capacity to embody these characteristics. This appendix presents papers covering each of the 21 metrics identified in Section 2.1 of the Smart Grid Status and Metrics Report. These metric papers were prepared in advance of the main body of the report and collectively form its informational backbone.

Mathematical tables tables of in g [z] for complex argument

CERN Document Server

Abramov, A A

1960-01-01

Mathematical Tables of In ? (z) for Complex Argument is a compilation of tables of In ? (z), z = x + iy, calculated for steps in x and y of 0.01 and with an accuracy of one unit in the last (the sixth) decimal place. Interpolation is used to calculate In ? (z) for intermediate values and is carried out separately for the real and imaginary parts of In ? (z). Six places are retained in interpolation.This book first explains how the values of In ? (z) are calculated using the asymptotic formula in a wide lattice with step h = 0.16, and how the tables and the nomograph are used. The values in the

Implications of Metric Choice for Common Applications of Readmission Metrics

OpenAIRE

Davies, Sheryl; Saynina, Olga; Schultz, Ellen; McDonald, Kathryn M; Baker, Laurence C

2013-01-01

Objective. To quantify the differential impact on hospital performance of three readmission metrics: all-cause readmission (ACR), 3M Potential Preventable Readmission (PPR), and Centers for Medicare and Medicaid 30-day readmission (CMS).

Prognostic Performance Metrics

Data.gov (United States)

National Aeronautics and Space Administration — This chapter presents several performance metrics for offline evaluation of prognostics algorithms. A brief overview of different methods employed for performance...

Adaptive metric kernel regression

DEFF Research Database (Denmark)

Goutte, Cyril; Larsen, Jan

2000-01-01

Kernel smoothing is a widely used non-parametric pattern recognition technique. By nature, it suffers from the curse of dimensionality and is usually difficult to apply to high input dimensions. In this contribution, we propose an algorithm that adapts the input metric used in multivariate...... regression by minimising a cross-validation estimate of the generalisation error. This allows to automatically adjust the importance of different dimensions. The improvement in terms of modelling performance is illustrated on a variable selection task where the adaptive metric kernel clearly outperforms...

Energy-Based Metrics for Arthroscopic Skills Assessment.

Science.gov (United States)

Poursartip, Behnaz; LeBel, Marie-Eve; McCracken, Laura C; Escoto, Abelardo; Patel, Rajni V; Naish, Michael D; Trejos, Ana Luisa

2017-08-05

Minimally invasive skills assessment methods are essential in developing efficient surgical simulators and implementing consistent skills evaluation. Although numerous methods have been investigated in the literature, there is still a need to further improve the accuracy of surgical skills assessment. Energy expenditure can be an indication of motor skills proficiency. The goals of this study are to develop objective metrics based on energy expenditure, normalize these metrics, and investigate classifying trainees using these metrics. To this end, different forms of energy consisting of mechanical energy and work were considered and their values were divided by the related value of an ideal performance to develop normalized metrics. These metrics were used as inputs for various machine learning algorithms including support vector machines (SVM) and neural networks (NNs) for classification. The accuracy of the combination of the normalized energy-based metrics with these classifiers was evaluated through a leave-one-subject-out cross-validation. The proposed method was validated using 26 subjects at two experience levels (novices and experts) in three arthroscopic tasks. The results showed that there are statistically significant differences between novices and experts for almost all of the normalized energy-based metrics. The accuracy of classification using SVM and NN methods was between 70% and 95% for the various tasks. The results show that the normalized energy-based metrics and their combination with SVM and NN classifiers are capable of providing accurate classification of trainees. The assessment method proposed in this study can enhance surgical training by providing appropriate feedback to trainees about their level of expertise and can be used in the evaluation of proficiency.

Validation of the Conversion between the Mini-Mental State Examination and Montreal Cognitive assessment in Korean Patients with Parkinson's Disease.

Science.gov (United States)

Kim, Ryul; Kim, Han-Joon; Kim, Aryun; Jang, Mi-Hee; Kim, Hyun Jeong; Jeon, Beomseok

2018-01-01

Two conversion tables between the Mini-Mental State Examination (MMSE) and Montreal Cognitive Assessment (MoCA) have recently been established for Parkinson's disease (PD). This study aimed to validate them in Korean patients with PD and to evaluate whether they could be influenced by educational level. A total of 391 patients with PD who undertook both the Korean MMSE and the Korean MoCA during the same session were retrospectively assessed. The mean, median, and root mean squared error (RMSE) of the difference between the true and converted MMSE scores and the intraclass correlation coefficient (ICC) were calculated according to educational level (6 or fewer years, 7-12 years, or 13 or more years). Both conversions had a median value of 0, with a small mean and RMSE of differences, and a high correlation between the true and converted MMSE scores. In the classification according to educational level, all groups had roughly similar values of the median, mean, RMSE, and ICC both within and between the conversions. Our findings suggest that both MMSE-MoCA conversion tables are useful instruments for transforming MoCA scores into converted MMSE scores in Korean patients with PD, regardless of educational level. These will greatly enhance the utility of the existing cognitive data from the Korean PD population in clinical and research settings.

Principle of space existence and De Sitter metric

International Nuclear Information System (INIS)

Mal'tsev, V.K.

1990-01-01

The selection principle for the solutions of the Einstein equations suggested in a series of papers implies the existence of space (g ik ≠ 0) only in the presence of matter (T ik ≠0). This selection principle (principle of space existence, in the Markov terminology) implies, in the general case, the absence of the cosmological solution with the De Sitter metric. On the other hand, the De Sitter metric is necessary for describing both inflation and deflation periods of the Universe. It is shown that the De Sitter metric is also allowed by the selection principle under discussion if the metric experiences the evolution into the Friedmann metric

What can article-level metrics do for you?

Science.gov (United States)

Fenner, Martin

2013-10-01

Article-level metrics (ALMs) provide a wide range of metrics about the uptake of an individual journal article by the scientific community after publication. They include citations, usage statistics, discussions in online comments and social media, social bookmarking, and recommendations. In this essay, we describe why article-level metrics are an important extension of traditional citation-based journal metrics and provide a number of example from ALM data collected for PLOS Biology.

Tables and figures from JNDC Nuclear Data Library of fission products, version 2

International Nuclear Information System (INIS)

Ihara, Hitoshi

1989-11-01

The content of JNDC (Japanese Nuclear Data Committee) FP (Fission Product) Nuclear Data Library version 2 for 1227 fission products is presented in the form of tables and figures. The library is inclusive of evaluated decay data such as decay constant, Q-value, average energies of beta, gamma and internal conversion electron, spin-parity, branching ratio of each decay mode and fission yield. The neutron capture cross-sections are also contained for 166 nuclides. The mass number of the fission product nuclides ranges from A = 66 to A = 172. (author)

About the possibility of a generalized metric

International Nuclear Information System (INIS)

Lukacs, B.; Ladik, J.

1991-10-01

The metric (the structure of the space-time) may be dependent on the properties of the object measuring it. The case of size dependence of the metric was examined. For this dependence the simplest possible form of the metric tensor has been constructed which fulfils the following requirements: there be two extremal characteristic scales; the metric be unique and the usual between them; the change be sudden in the neighbourhood of these scales; the size of the human body appear as a parameter (postulated on the basis of some philosophical arguments). Estimates have been made for the two extremal length scales according to existing observations. (author) 19 refs

Adaptive Metric Kernel Regression

DEFF Research Database (Denmark)

Goutte, Cyril; Larsen, Jan

1998-01-01

Kernel smoothing is a widely used nonparametric pattern recognition technique. By nature, it suffers from the curse of dimensionality and is usually difficult to apply to high input dimensions. In this paper, we propose an algorithm that adapts the input metric used in multivariate regression...... by minimising a cross-validation estimate of the generalisation error. This allows one to automatically adjust the importance of different dimensions. The improvement in terms of modelling performance is illustrated on a variable selection task where the adaptive metric kernel clearly outperforms the standard...

Ideal Based Cyber Security Technical Metrics for Control Systems

Energy Technology Data Exchange (ETDEWEB)

W. F. Boyer; M. A. McQueen

2007-10-01

Much of the world's critical infrastructure is at risk from attack through electronic networks connected to control systems. Security metrics are important because they provide the basis for management decisions that affect the protection of the infrastructure. A cyber security technical metric is the security relevant output from an explicit mathematical model that makes use of objective measurements of a technical object. A specific set of technical security metrics are proposed for use by the operators of control systems. Our proposed metrics are based on seven security ideals associated with seven corresponding abstract dimensions of security. We have defined at least one metric for each of the seven ideals. Each metric is a measure of how nearly the associated ideal has been achieved. These seven ideals provide a useful structure for further metrics development. A case study shows how the proposed metrics can be applied to an operational control system.

THE ROLE OF ARTICLE LEVEL METRICS IN SCIENTIFIC PUBLISHING

Directory of Open Access Journals (Sweden)

Vladimir TRAJKOVSKI

2016-04-01

Full Text Available Emerging metrics based on article-level does not exclude traditional metrics based on citations to the journal, but complements them. Article-level metrics (ALMs provide a wide range of metrics about the uptake of an individual journal article by the scientific community after publication. They include citations, statistics of usage, discussions in online comments and social media, social bookmarking, and recommendations. In this editorial, the role of article level metrics in publishing scientific papers has been described. Article-Level Metrics (ALMs are rapidly emerging as important tools to quantify how individual articles are being discussed, shared, and used. Data sources depend on the tool, but they include classic metrics indicators depending on citations, academic social networks (Mendeley, CiteULike, Delicious and social media (Facebook, Twitter, blogs, and Youtube. The most popular tools used to apply this new metrics are: Public Library of Science - Article-Level Metrics, Altmetric, Impactstory and Plum Analytics. Journal Impact Factor (JIF does not consider impact or influence beyond citations count as this count reflected only through Thomson Reuters’ Web of Science® database. JIF provides indicator related to the journal, but not related to a published paper. Thus, altmetrics now becomes an alternative metrics for performance assessment of individual scientists and their contributed scholarly publications. Macedonian scholarly publishers have to work on implementing of article level metrics in their e-journals. It is the way to increase their visibility and impact in the world of science.

Characterising risk - aggregated metrics: radiation and noise

International Nuclear Information System (INIS)

Passchier, W.

1998-01-01

The characterisation of risk is an important phase in the risk assessment - risk management process. From the multitude of risk attributes a few have to be selected to obtain a risk characteristic or profile that is useful for risk management decisions and implementation of protective measures. One way to reduce the number of attributes is aggregation. In the field of radiation protection such an aggregated metric is firmly established: effective dose. For protection against environmental noise the Health Council of the Netherlands recently proposed a set of aggregated metrics for noise annoyance and sleep disturbance. The presentation will discuss similarities and differences between these two metrics and practical limitations. The effective dose has proven its usefulness in designing radiation protection measures, which are related to the level of risk associated with the radiation practice in question, given that implicit judgements on radiation induced health effects are accepted. However, as the metric does not take into account the nature of radiation practice, it is less useful in policy discussions on the benefits and harm of radiation practices. With respect to the noise exposure metric, only one effect is targeted (annoyance), and the differences between sources are explicitly taken into account. This should make the metric useful in policy discussions with respect to physical planning and siting problems. The metric proposed has only significance on a population level, and can not be used as a predictor for individual risk. (author)

Supplier selection using different metric functions

Directory of Open Access Journals (Sweden)

Omosigho S.E.

2015-01-01

Full Text Available Supplier selection is an important component of supply chain management in today’s global competitive environment. Hence, the evaluation and selection of suppliers have received considerable attention in the literature. Many attributes of suppliers, other than cost, are considered in the evaluation and selection process. Therefore, the process of evaluation and selection of suppliers is a multi-criteria decision making process. The methodology adopted to solve the supplier selection problem is intuitionistic fuzzy TOPSIS (Technique for Order Preference by Similarity to the Ideal Solution. Generally, TOPSIS is based on the concept of minimum distance from the positive ideal solution and maximum distance from the negative ideal solution. We examine the deficiencies of using only one metric function in TOPSIS and propose the use of spherical metric function in addition to the commonly used metric functions. For empirical supplier selection problems, more than one metric function should be used.

77 FR 12832 - Non-RTO/ISO Performance Metrics; Commission Staff Request Comments on Performance Metrics for...

Science.gov (United States)

2012-03-02

... Performance Metrics; Commission Staff Request Comments on Performance Metrics for Regions Outside of RTOs and... performance communicate about the benefits of RTOs and, where appropriate, (2) changes that need to be made to... common set of performance measures for markets both within and outside of ISOs/RTOs. As recommended by...

Regional Sustainability: The San Luis Basin Metrics Project

Science.gov (United States)

There are a number of established, scientifically supported metrics of sustainability. Many of the metrics are data intensive and require extensive effort to collect data and compute. Moreover, individual metrics may not capture all aspects of a system that are relevant to sust...

Probabilistic metric spaces

CERN Document Server

Schweizer, B

2005-01-01

Topics include special classes of probabilistic metric spaces, topologies, and several related structures, such as probabilistic normed and inner-product spaces. 1983 edition, updated with 3 new appendixes. Includes 17 illustrations.

Metric solution of a spinning mass

International Nuclear Information System (INIS)

Sato, H.

1982-01-01

Studies on a particular class of asymptotically flat and stationary metric solutions called the Kerr-Tomimatsu-Sato class are reviewed about its derivation and properties. For a further study, an almost complete list of the papers worked on the Tomimatsu-Sato metrics is given. (Auth.)

Empirical yield tables for Wisconsin.

Science.gov (United States)

Jerold T. Hahn; Joan M. Stelman

1989-01-01

Describes the tables derived from the 1983 Forest Survey of Wisconsin and presents ways the tables can be used. These tables are broken down according to Wisconsin`s five Forest Survey Units and 14 forest types.

Software architecture analysis tool : software architecture metrics collection

NARCIS (Netherlands)

Muskens, J.; Chaudron, M.R.V.; Westgeest, R.

2002-01-01

The Software Engineering discipline lacks the ability to evaluate software architectures. Here we describe a tool for software architecture analysis that is based on metrics. Metrics can be used to detect possible problems and bottlenecks in software architectures. Even though metrics do not give a

Generalized tolerance sensitivity and DEA metric sensitivity

OpenAIRE

Neralić, Luka; E. Wendell, Richard

2015-01-01

This paper considers the relationship between Tolerance sensitivity analysis in optimization and metric sensitivity analysis in Data Envelopment Analysis (DEA). Herein, we extend the results on the generalized Tolerance framework proposed by Wendell and Chen and show how this framework includes DEA metric sensitivity as a special case. Further, we note how recent results in Tolerance sensitivity suggest some possible extensions of the results in DEA metric sensitivity.

On Nakhleh's metric for reduced phylogenetic networks

OpenAIRE

Cardona, Gabriel; Llabrés, Mercè; Rosselló, Francesc; Valiente Feruglio, Gabriel Alejandro

2009-01-01

We prove that Nakhleh’s metric for reduced phylogenetic networks is also a metric on the classes of tree-child phylogenetic networks, semibinary tree-sibling time consistent phylogenetic networks, and multilabeled phylogenetic trees. We also prove that it separates distinguishable phylogenetic networks. In this way, it becomes the strongest dissimilarity measure for phylogenetic networks available so far. Furthermore, we propose a generalization of that metric that separates arbitrary phyl...

Generalized tolerance sensitivity and DEA metric sensitivity

Directory of Open Access Journals (Sweden)

Luka Neralić

2015-03-01

Full Text Available This paper considers the relationship between Tolerance sensitivity analysis in optimization and metric sensitivity analysis in Data Envelopment Analysis (DEA. Herein, we extend the results on the generalized Tolerance framework proposed by Wendell and Chen and show how this framework includes DEA metric sensitivity as a special case. Further, we note how recent results in Tolerance sensitivity suggest some possible extensions of the results in DEA metric sensitivity.

Social Media Metrics Importance and Usage Frequency in Latvia

Directory of Open Access Journals (Sweden)

Ronalds Skulme

2017-12-01

Full Text Available Purpose of the article: The purpose of this paper was to explore which social media marketing metrics are most often used and are most important for marketing experts in Latvia and can be used to evaluate marketing campaign effectiveness. Methodology/methods: In order to achieve the aim of this paper several theoretical and practical research methods were used, such as theoretical literature analysis, surveying and grouping. First of all, theoretical research about social media metrics was conducted. Authors collected information about social media metric grouping methods and the most frequently mentioned social media metrics in the literature. The collected information was used as the foundation for the expert surveys. The expert surveys were used to collect information from Latvian marketing professionals to determine which social media metrics are used most often and which social media metrics are most important in Latvia. Scientific aim: The scientific aim of this paper was to identify if social media metrics importance varies depending on the consumer purchase decision stage. Findings: Information about the most important and most often used social media marketing metrics in Latvia was collected. A new social media grouping framework is proposed. Conclusions: The main conclusion is that the importance and the usage frequency of the social media metrics is changing depending of consumer purchase decisions stage the metric is used to evaluate.

www.common-metrics.org: a web application to estimate scores from different patient-reported outcome measures on a common scale.

Science.gov (United States)

Fischer, H Felix; Rose, Matthias

2016-10-19

Recently, a growing number of Item-Response Theory (IRT) models has been published, which allow estimation of a common latent variable from data derived by different Patient Reported Outcomes (PROs). When using data from different PROs, direct estimation of the latent variable has some advantages over the use of sum score conversion tables. It requires substantial proficiency in the field of psychometrics to fit such models using contemporary IRT software. We developed a web application ( http://www.common-metrics.org ), which allows estimation of latent variable scores more easily using IRT models calibrating different measures on instrument independent scales. Currently, the application allows estimation using six different IRT models for Depression, Anxiety, and Physical Function. Based on published item parameters, users of the application can directly estimate latent trait estimates using expected a posteriori (EAP) for sum scores as well as for specific response patterns, Bayes modal (MAP), Weighted likelihood estimation (WLE) and Maximum likelihood (ML) methods and under three different prior distributions. The obtained estimates can be downloaded and analyzed using standard statistical software. This application enhances the usability of IRT modeling for researchers by allowing comparison of the latent trait estimates over different PROs, such as the Patient Health Questionnaire Depression (PHQ-9) and Anxiety (GAD-7) scales, the Center of Epidemiologic Studies Depression Scale (CES-D), the Beck Depression Inventory (BDI), PROMIS Anxiety and Depression Short Forms and others. Advantages of this approach include comparability of data derived with different measures and tolerance against missing values. The validity of the underlying models needs to be investigated in the future.

A comparison theorem of the Kobayashi metric and the Bergman metric on a class of Reinhardt domains

International Nuclear Information System (INIS)

Weiping Yin.

1990-03-01

A comparison theorem for the Kobayashi and Bergman metric is given on a class of Reinhardt domains in C n . In the meantime, we obtain a class of complete invariant Kaehler metrics for these domains of the special cases. (author). 5 refs

Using Activity Metrics for DEVS Simulation Profiling

Directory of Open Access Journals (Sweden)

Muzy A.

2014-01-01

Full Text Available Activity metrics can be used to profile DEVS models before and during the simulation. It is critical to get good activity metrics of models before and during their simulation. Having a means to compute a-priori activity of components (analytic activity may be worth when simulating a model (or parts of it for the first time. After, during the simulation, analytic activity can be corrected using dynamic one. In this paper, we introduce McCabe cyclomatic complexity metric (MCA to compute analytic activity. Both static and simulation activity metrics have been implemented through a plug-in of the DEVSimPy (DEVS Simulator in Python language environment and applied to DEVS models.

Tracker Performance Metric

National Research Council Canada - National Science Library

Olson, Teresa; Lee, Harry; Sanders, Johnnie

2002-01-01

.... We have developed the Tracker Performance Metric (TPM) specifically for this purpose. It was designed to measure the output performance, on a frame-by-frame basis, using its output position and quality...

Conformal and related changes of metric on the product of two almost contact metric manifolds.

OpenAIRE

Blair, D. E.

1990-01-01

This paper studies conformal and related changes of the product metric on the product of two almost contact metric manifolds. It is shown that if one factor is Sasakian, the other is not, but that locally the second factor is of the type studied by Kenmotsu. The results are more general and given in terms of trans-Sasakian, α-Sasakian and β-Kenmotsu structures.

Extremal limits of the C metric: Nariai, Bertotti-Robinson, and anti-Nariai C metrics

International Nuclear Information System (INIS)

Dias, Oscar J.C.; Lemos, Jose P.S.

2003-01-01

In two previous papers we have analyzed the C metric in a background with a cosmological constant Λ, namely, the de-Sitter (dS) C metric (Λ>0), and the anti-de Sitter (AdS) C metric (Λ 0, Λ=0, and Λ 2 xS-tilde 2 ) to each point in the deformed two-sphere S-tilde 2 corresponds a dS 2 spacetime, except for one point which corresponds to a dS 2 spacetime with an infinite straight strut or string. There are other important new features that appear. One expects that the solutions found in this paper are unstable and decay into a slightly nonextreme black hole pair accelerated by a strut or by strings. Moreover, the Euclidean version of these solutions mediate the quantum process of black hole pair creation that accompanies the decay of the dS and AdS spaces

Graev metrics on free products and HNN extensions

DEFF Research Database (Denmark)

Slutsky, Konstantin

2014-01-01

We give a construction of two-sided invariant metrics on free products (possibly with amalgamation) of groups with two-sided invariant metrics and, under certain conditions, on HNN extensions of such groups. Our approach is similar to the Graev's construction of metrics on free groups over pointed...

Validation of Metrics for Collaborative Systems

OpenAIRE

Ion IVAN; Cristian CIUREA

2008-01-01

This paper describe the new concepts of collaborative systems metrics validation. The paper define the quality characteristics of collaborative systems. There are proposed a metric to estimate the quality level of collaborative systems. There are performed measurements of collaborative systems quality using a specially designed software.

g-Weak Contraction in Ordered Cone Rectangular Metric Spaces

Directory of Open Access Journals (Sweden)

S. K. Malhotra

2013-01-01

Full Text Available We prove some common fixed-point theorems for the ordered g-weak contractions in cone rectangular metric spaces without assuming the normality of cone. Our results generalize some recent results from cone metric and cone rectangular metric spaces into ordered cone rectangular metric spaces. Examples are provided which illustrate the results.

Empirical yield tables for Michigan.

Science.gov (United States)

Jerold T. Hahn; Joan M. Stelman

1984-01-01

Describes the tables derived from the 1980 Forest Survey of Michigan and presents ways the tables can be used. These tables are broken down according to Michigan's four Forest Survey Units, 14 forest types, and 5 site-index classes.

The dynamics of metric-affine gravity

International Nuclear Information System (INIS)

Vitagliano, Vincenzo; Sotiriou, Thomas P.; Liberati, Stefano

2011-01-01

Highlights: → The role and the dynamics of the connection in metric-affine theories is explored. → The most general second order action does not lead to a dynamical connection. → Including higher order invariants excites new degrees of freedom in the connection. → f(R) actions are also discussed and shown to be a non- representative class. - Abstract: Metric-affine theories of gravity provide an interesting alternative to general relativity: in such an approach, the metric and the affine (not necessarily symmetric) connection are independent quantities. Furthermore, the action should include covariant derivatives of the matter fields, with the covariant derivative naturally defined using the independent connection. As a result, in metric-affine theories a direct coupling involving matter and connection is also present. The role and the dynamics of the connection in such theories is explored. We employ power counting in order to construct the action and search for the minimal requirements it should satisfy for the connection to be dynamical. We find that for the most general action containing lower order invariants of the curvature and the torsion the independent connection does not carry any dynamics. It actually reduces to the role of an auxiliary field and can be completely eliminated algebraically in favour of the metric and the matter field, introducing extra interactions with respect to general relativity. However, we also show that including higher order terms in the action radically changes this picture and excites new degrees of freedom in the connection, making it (or parts of it) dynamical. Constructing actions that constitute exceptions to this rule requires significant fine tuned and/or extra a priori constraints on the connection. We also consider f(R) actions as a particular example in order to show that they constitute a distinct class of metric-affine theories with special properties, and as such they cannot be used as representative toy

Validation of the Conversion between the Mini-Mental State Examination and Montreal Cognitive assessment in Korean Patients with Parkinson’s Disease

Science.gov (United States)

Kim, Ryul; Kim, Han-Joon; Kim, Aryun; Jang, Mi-Hee; Kim, Hyun Jeong; Jeon, Beomseok

2018-01-01

Objective Two conversion tables between the Mini-Mental State Examination (MMSE) and Montreal Cognitive Assessment (MoCA) have recently been established for Parkinson’s disease (PD). This study aimed to validate them in Korean patients with PD and to evaluate whether they could be influenced by educational level. Methods A total of 391 patients with PD who undertook both the Korean MMSE and the Korean MoCA during the same session were retrospectively assessed. The mean, median, and root mean squared error (RMSE) of the difference between the true and converted MMSE scores and the intraclass correlation coefficient (ICC) were calculated according to educational level (6 or fewer years, 7–12 years, or 13 or more years). Results Both conversions had a median value of 0, with a small mean and RMSE of differences, and a high correlation between the true and converted MMSE scores. In the classification according to educational level, all groups had roughly similar values of the median, mean, RMSE, and ICC both within and between the conversions. Conclusion Our findings suggest that both MMSE-MoCA conversion tables are useful instruments for transforming MoCA scores into converted MMSE scores in Korean patients with PD, regardless of educational level. These will greatly enhance the utility of the existing cognitive data from the Korean PD population in clinical and research settings. PMID:29316782

The definitive guide to IT service metrics

CERN Document Server

McWhirter, Kurt

2012-01-01

Used just as they are, the metrics in this book will bring many benefits to both the IT department and the business as a whole. Details of the attributes of each metric are given, enabling you to make the right choices for your business. You may prefer and are encouraged to design and create your own metrics to bring even more value to your business - this book will show you how to do this, too.

Enhancing Authentication Models Characteristic Metrics via ...

African Journals Online (AJOL)

In this work, we derive the universal characteristic metrics set for authentication models based on security, usability and design issues. We then compute the probability of the occurrence of each characteristic metrics in some single factor and multifactor authentication models in order to determine the effectiveness of these ...

Validation of Metrics for Collaborative Systems

Directory of Open Access Journals (Sweden)

Ion IVAN

2008-01-01

Full Text Available This paper describe the new concepts of collaborative systems metrics validation. The paper define the quality characteristics of collaborative systems. There are proposed a metric to estimate the quality level of collaborative systems. There are performed measurements of collaborative systems quality using a specially designed software.

Understanding Acceptance of Software Metrics--A Developer Perspective

Science.gov (United States)

Umarji, Medha

2009-01-01

Software metrics are measures of software products and processes. Metrics are widely used by software organizations to help manage projects, improve product quality and increase efficiency of the software development process. However, metrics programs tend to have a high failure rate in organizations, and developer pushback is one of the sources…

Measuring reliability under epistemic uncertainty: Review on non-probabilistic reliability metrics

Directory of Open Access Journals (Sweden)

Kang Rui

2016-06-01

Full Text Available In this paper, a systematic review of non-probabilistic reliability metrics is conducted to assist the selection of appropriate reliability metrics to model the influence of epistemic uncertainty. Five frequently used non-probabilistic reliability metrics are critically reviewed, i.e., evidence-theory-based reliability metrics, interval-analysis-based reliability metrics, fuzzy-interval-analysis-based reliability metrics, possibility-theory-based reliability metrics (posbist reliability and uncertainty-theory-based reliability metrics (belief reliability. It is pointed out that a qualified reliability metric that is able to consider the effect of epistemic uncertainty needs to (1 compensate the conservatism in the estimations of the component-level reliability metrics caused by epistemic uncertainty, and (2 satisfy the duality axiom, otherwise it might lead to paradoxical and confusing results in engineering applications. The five commonly used non-probabilistic reliability metrics are compared in terms of these two properties, and the comparison can serve as a basis for the selection of the appropriate reliability metrics.

Characteristics of Tables for Disseminating Biobehavioral Results.

Science.gov (United States)

Schneider, Barbara St Pierre; Nagelhout, Ed; Feng, Du

2018-01-01

To report the complexity and richness of study variables within biological nursing research, authors often use tables; however, the ease with which consumers understand, synthesize, evaluate, and build upon findings depends partly upon table design. To assess and compare table characteristics within research and review articles published in Biological Research for Nursing and Nursing Research. A total of 10 elements in tables from 48 biobehavioral or biological research or review articles were analyzed. To test six hypotheses, a two-level hierarchical linear model was used for each of the continuous table elements, and a two-level hierarchical generalized linear model was used for each of the categorical table elements. Additionally, the inclusion of probability values in statistical tables was examined. The mean number of tables per article was 3. Tables in research articles were more likely to contain quantitative content, while tables in review articles were more likely to contain both quantitative and qualitative content. Tables in research articles had a greater number of rows, columns, and column-heading levels than tables in review articles. More than one half of statistical tables in research articles had a separate probability column or had probability values within the table, whereas approximately one fourth had probability notes. Authors and journal editorial staff may be generating tables that better depict biobehavioral content than those identified in specific style guidelines. However, authors and journal editorial staff may want to consider table design in terms of audience, including alternative visual displays.

Construction of self-dual codes in the Rosenbloom-Tsfasman metric

Science.gov (United States)

Krisnawati, Vira Hari; Nisa, Anzi Lina Ukhtin

2017-12-01

Linear code is a very basic code and very useful in coding theory. Generally, linear code is a code over finite field in Hamming metric. Among the most interesting families of codes, the family of self-dual code is a very important one, because it is the best known error-correcting code. The concept of Hamming metric is develop into Rosenbloom-Tsfasman metric (RT-metric). The inner product in RT-metric is different from Euclid inner product that is used to define duality in Hamming metric. Most of the codes which are self-dual in Hamming metric are not so in RT-metric. And, generator matrix is very important to construct a code because it contains basis of the code. Therefore in this paper, we give some theorems and methods to construct self-dual codes in RT-metric by considering properties of the inner product and generator matrix. Also, we illustrate some examples for every kind of the construction.

Chaotic inflation with metric and matter perturbations

International Nuclear Information System (INIS)

Feldman, H.A.; Brandenberger, R.H.

1989-01-01

A perturbative scheme to analyze the evolution of both metric and scalar field perturbations in an expanding universe is developed. The scheme is applied to study chaotic inflation with initial metric and scalar field perturbations present. It is shown that initial gravitational perturbations with wavelength smaller than the Hubble radius rapidly decay. The metric simultaneously picks up small perturbations determined by the matter inhomogeneities. Both are frozen in once the wavelength exceeds the Hubble radius. (orig.)

Phantom metrics with Killing spinors

Directory of Open Access Journals (Sweden)

W.A. Sabra

2015-11-01

Full Text Available We study metric solutions of Einstein–anti-Maxwell theory admitting Killing spinors. The analogue of the IWP metric which admits a space-like Killing vector is found and is expressed in terms of a complex function satisfying the wave equation in flat (2+1-dimensional space–time. As examples, electric and magnetic Kasner spaces are constructed by allowing the solution to depend only on the time coordinate. Euclidean solutions are also presented.

Pension Insurance Data Tables

Data.gov (United States)

Pension Benefit Guaranty Corporation — Find out about retirement trends in PBGC's data tables. The tables include statistics on the people and pensions that PBGC protects, including how many Americans are...

Invariant metric for nonlinear symplectic maps

Indian Academy of Sciences (India)

In this paper, we construct an invariant metric in the space of homogeneous polynomials of a given degree (≥ 3). The homogeneous polynomials specify a nonlinear symplectic map which in turn represents a Hamiltonian system. By minimizing the norm constructed out of this metric as a function of system parameters, we ...

Two-dimensional manifolds with metrics of revolution

International Nuclear Information System (INIS)

Sabitov, I Kh

2000-01-01

This is a study of the topological and metric structure of two-dimensional manifolds with a metric that is locally a metric of revolution. In the case of compact manifolds this problem can be thoroughly investigated, and in particular it is explained why there are no closed analytic surfaces of revolution in R 3 other than a sphere and a torus (moreover, in the smoothness class C ∞ such surfaces, understood in a certain generalized sense, exist in any topological class)

Gravitational lensing in metric theories of gravity

International Nuclear Information System (INIS)

Sereno, Mauro

2003-01-01

Gravitational lensing in metric theories of gravity is discussed. I introduce a generalized approximate metric element, inclusive of both post-post-Newtonian contributions and a gravitomagnetic field. Following Fermat's principle and standard hypotheses, I derive the time delay function and deflection angle caused by an isolated mass distribution. Several astrophysical systems are considered. In most of the cases, the gravitomagnetic correction offers the best perspectives for an observational detection. Actual measurements distinguish only marginally different metric theories from each other

The uniqueness of the Fisher metric as information metric

Czech Academy of Sciences Publication Activity Database

Le, Hong-Van

2017-01-01

Roč. 69, č. 4 (2017), s. 879-896 ISSN 0020-3157 Institutional support: RVO:67985840 Keywords : Chentsov’s theorem * mixed topology * monotonicity of the Fisher metric Subject RIV: BA - General Mathematics OBOR OECD: Pure mathematics Impact factor: 1.049, year: 2016 https://link.springer.com/article/10.1007%2Fs10463-016-0562-0

Hybrid metric-Palatini stars

Science.gov (United States)

Danilǎ, Bogdan; Harko, Tiberiu; Lobo, Francisco S. N.; Mak, M. K.

2017-02-01

We consider the internal structure and the physical properties of specific classes of neutron, quark and Bose-Einstein condensate stars in the recently proposed hybrid metric-Palatini gravity theory, which is a combination of the metric and Palatini f (R ) formalisms. It turns out that the theory is very successful in accounting for the observed phenomenology, since it unifies local constraints at the Solar System level and the late-time cosmic acceleration, even if the scalar field is very light. In this paper, we derive the equilibrium equations for a spherically symmetric configuration (mass continuity and Tolman-Oppenheimer-Volkoff) in the framework of the scalar-tensor representation of the hybrid metric-Palatini theory, and we investigate their solutions numerically for different equations of state of neutron and quark matter, by adopting for the scalar field potential a Higgs-type form. It turns out that the scalar-tensor definition of the potential can be represented as an Clairaut differential equation, and provides an explicit form for f (R ) given by f (R )˜R +Λeff, where Λeff is an effective cosmological constant. Furthermore, stellar models, described by the stiff fluid, radiation-like, bag model and the Bose-Einstein condensate equations of state are explicitly constructed in both general relativity and hybrid metric-Palatini gravity, thus allowing an in-depth comparison between the predictions of these two gravitational theories. As a general result it turns out that for all the considered equations of state, hybrid gravity stars are more massive than their general relativistic counterparts. Furthermore, two classes of stellar models corresponding to two particular choices of the functional form of the scalar field (constant value, and logarithmic form, respectively) are also investigated. Interestingly enough, in the case of a constant scalar field the equation of state of the matter takes the form of the bag model equation of state describing

NNDSS - Table II. Vibriosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Vibriosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year), and selected...

NNDSS - Table II. Vibriosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Vibriosis - 2018. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year), and selected...

The universal connection and metrics on moduli spaces

International Nuclear Information System (INIS)

Massamba, Fortune; Thompson, George

2003-11-01

We introduce a class of metrics on gauge theoretic moduli spaces. These metrics are made out of the universal matrix that appears in the universal connection construction of M. S. Narasimhan and S. Ramanan. As an example we construct metrics on the c 2 = 1 SU(2) moduli space of instantons on R 4 for various universal matrices. (author)

Reproducibility of graph metrics in fMRI networks

Directory of Open Access Journals (Sweden)

Qawi K Telesford

2010-12-01

Full Text Available The reliability of graph metrics calculated in network analysis is essential to the interpretation of complex network organization. These graph metrics are used to deduce the small-world properties in networks. In this study, we investigated the test-retest reliability of graph metrics from functional magnetic resonance imaging (fMRI data collected for two runs in 45 healthy older adults. Graph metrics were calculated on data for both runs and compared using intraclass correlation coefficient (ICC statistics and Bland-Altman (BA plots. ICC scores describe the level of absolute agreement between two measurements and provide a measure of reproducibility. For mean graph metrics, ICC scores were high for clustering coefficient (ICC=0.86, global efficiency (ICC=0.83, path length (ICC=0.79, and local efficiency (ICC=0.75; the ICC score for degree was found to be low (ICC=0.29. ICC scores were also used to generate reproducibility maps in brain space to test voxel-wise reproducibility for unsmoothed and smoothed data. Reproducibility was uniform across the brain for global efficiency and path length, but was only high in network hubs for clustering coefficient, local efficiency and degree. BA plots were used to test the measurement repeatability of all graph metrics. All graph metrics fell within the limits for repeatability. Together, these results suggest that with exception of degree, mean graph metrics are reproducible and suitable for clinical studies. Further exploration is warranted to better understand reproducibility across the brain on a voxel-wise basis.

Advances in food composition tables in Japan-Standard Tables Of Food Composition in Japan - 2015 - (Seventh Revised Edition).

Science.gov (United States)

Watanabe, Tomoko; Kawai, Ryoko

2018-01-01

The latest version of the Standard Tables of Food Composition in Japan-2015- comprises the main food composition table (Standard Tables of Food Composition in Japan-2015-[Seventh revised Edition)) and three supplementary books. The supplementary books are Standard Tables of Food Composition in Japan - 2015 - (Seventh Revised Edition) - Amino Acids -, Standard Tables of Food Composition in Japan - 2015 - (Seventh Revised Edition) - Fatty Acids - and Standard Tables of Food Composition in Japan - 2015 - (Seventh Revised Edition) - Available Carbohydrates, Polyols and Organic Acids-. We believe understanding these food composition tables can give greater insight into Japan's gastronomic culture and changes in eating habits. We expect them to play important roles as part of the East Asia food composition tables. Copyright © 2017. Published by Elsevier Ltd.

Complexity Metrics for Workflow Nets

DEFF Research Database (Denmark)

Lassen, Kristian Bisgaard; van der Aalst, Wil M.P.

2009-01-01

analysts have difficulties grasping the dynamics implied by a process model. Recent empirical studies show that people make numerous errors when modeling complex business processes, e.g., about 20 percent of the EPCs in the SAP reference model have design flaws resulting in potential deadlocks, livelocks......, etc. It seems obvious that the complexity of the model contributes to design errors and a lack of understanding. It is not easy to measure complexity, however. This paper presents three complexity metrics that have been implemented in the process analysis tool ProM. The metrics are defined...... for a subclass of Petri nets named Workflow nets, but the results can easily be applied to other languages. To demonstrate the applicability of these metrics, we have applied our approach and tool to 262 relatively complex Protos models made in the context of various student projects. This allows us to validate...

NNDSS - Table IV. Tuberculosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2016.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

NNDSS - Table IV. Tuberculosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2014.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

NNDSS - Table III. Tuberculosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table III. Tuberculosis - 2017.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

NNDSS - Table IV. Tuberculosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2015.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

NNDSS - Table III. Tuberculosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table III. Tuberculosis - 2018.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

Sustainability Metrics: The San Luis Basin Project

Science.gov (United States)

Sustainability is about promoting humanly desirable dynamic regimes of the environment. Metrics: ecological footprint, net regional product, exergy, emergy, and Fisher Information. Adaptive management: (1) metrics assess problem, (2) specific problem identified, and (3) managemen...

AREVA invests 610 million euro in new uranium conversion plants

International Nuclear Information System (INIS)

2007-05-01

AREVA today announced the launch of the Comurhex II project which will see the group build new uranium conversion facilities on the Malvesi site in Narbonne and Tricastin. Through this 610 million euro investment, AREVA aims to maintain its position as world no. 1 for conversion within a context of global nuclear energy. COMURHEX II integrates technological innovations from major R and D programs and return of experience from processes in operation for over forty years. Nuclear safety and reducing the impact on the environment were top priorities when designing the project. These future facilities will also lead to major savings of water and energy consumption and reduce effluents. The groundwork of the Comurhex II project has taken 150,000 hours of engineering over the past three years. Four hundred people will work on the site which will be launched in summer 2007. First industrial production is scheduled for 2012, based on 15,000 metric tons of uranium per year. This figure may be increased to 21,000 tons to meet market requirements

Goedel-type metrics in various dimensions

International Nuclear Information System (INIS)

Guerses, Metin; Karasu, Atalay; Sarioglu, Oezguer

2005-01-01

Goedel-type metrics are introduced and used in producing charged dust solutions in various dimensions. The key ingredient is a (D - 1)-dimensional Riemannian geometry which is then employed in constructing solutions to the Einstein-Maxwell field equations with a dust distribution in D dimensions. The only essential field equation in the procedure turns out to be the source-free Maxwell's equation in the relevant background. Similarly the geodesics of this type of metric are described by the Lorentz force equation for a charged particle in the lower dimensional geometry. It is explicitly shown with several examples that Goedel-type metrics can be used in obtaining exact solutions to various supergravity theories and in constructing spacetimes that contain both closed timelike and closed null curves and that contain neither of these. Among the solutions that can be established using non-flat backgrounds, such as the Tangherlini metrics in (D - 1)-dimensions, there exists a class which can be interpreted as describing black-hole-type objects in a Goedel-like universe

Standardised metrics for global surgical surveillance.

Science.gov (United States)

Weiser, Thomas G; Makary, Martin A; Haynes, Alex B; Dziekan, Gerald; Berry, William R; Gawande, Atul A

2009-09-26

Public health surveillance relies on standardised metrics to evaluate disease burden and health system performance. Such metrics have not been developed for surgical services despite increasing volume, substantial cost, and high rates of death and disability associated with surgery. The Safe Surgery Saves Lives initiative of WHO's Patient Safety Programme has developed standardised public health metrics for surgical care that are applicable worldwide. We assembled an international panel of experts to develop and define metrics for measuring the magnitude and effect of surgical care in a population, while taking into account economic feasibility and practicability. This panel recommended six measures for assessing surgical services at a national level: number of operating rooms, number of operations, number of accredited surgeons, number of accredited anaesthesia professionals, day-of-surgery death ratio, and postoperative in-hospital death ratio. We assessed the feasibility of gathering such statistics at eight diverse hospitals in eight countries and incorporated them into the WHO Guidelines for Safe Surgery, in which methods for data collection, analysis, and reporting are outlined.

Developing a Security Metrics Scorecard for Healthcare Organizations.

Science.gov (United States)

Elrefaey, Heba; Borycki, Elizabeth; Kushniruk, Andrea

2015-01-01

In healthcare, information security is a key aspect of protecting a patient's privacy and ensuring systems availability to support patient care. Security managers need to measure the performance of security systems and this can be achieved by using evidence-based metrics. In this paper, we describe the development of an evidence-based security metrics scorecard specific to healthcare organizations. Study participants were asked to comment on the usability and usefulness of a prototype of a security metrics scorecard that was developed based on current research in the area of general security metrics. Study findings revealed that scorecards need to be customized for the healthcare setting in order for the security information to be useful and usable in healthcare organizations. The study findings resulted in the development of a security metrics scorecard that matches the healthcare security experts' information requirements.

30 CFR 250.1401 - Index table.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Index table. 250.1401 Section 250.1401 Mineral... OPERATIONS IN THE OUTER CONTINENTAL SHELF Outer Continental Shelf (OCS) Civil Penalties § 250.1401 Index table. The following table is an index of the sections in this subpart: § 250.1401Table Definitions...

Landscape pattern metrics and regional assessment

Science.gov (United States)

O'Neill, R. V.; Riitters, K.H.; Wickham, J.D.; Jones, K.B.

1999-01-01

The combination of remote imagery data, geographic information systems software, and landscape ecology theory provides a unique basis for monitoring and assessing large-scale ecological systems. The unique feature of the work has been the need to develop and interpret quantitative measures of spatial pattern-the landscape indices. This article reviews what is known about the statistical properties of these pattern metrics and suggests some additional metrics based on island biogeography, percolation theory, hierarchy theory, and economic geography. Assessment applications of this approach have required interpreting the pattern metrics in terms of specific environmental endpoints, such as wildlife and water quality, and research into how to represent synergystic effects of many overlapping sources of stress.

Self-benchmarking Guide for Cleanrooms: Metrics, Benchmarks, Actions

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul; Sartor, Dale; Tschudi, William

2009-07-13

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in laboratory buildings. This guide is primarily intended for personnel who have responsibility for managing energy use in existing laboratory facilities - including facilities managers, energy managers, and their engineering consultants. Additionally, laboratory planners and designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior research supported by the national Laboratories for the 21st Century (Labs21) program, supported by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Much of the benchmarking data are drawn from the Labs21 benchmarking database and technical guides. Additional benchmark data were obtained from engineering experts including laboratory designers and energy managers.

Metrics Are Needed for Collaborative Software Development

Directory of Open Access Journals (Sweden)

Mojgan Mohtashami

2011-10-01

Full Text Available There is a need for metrics for inter-organizational collaborative software development projects, encompassing management and technical concerns. In particular, metrics are needed that are aimed at the collaborative aspect itself, such as readiness for collaboration, the quality and/or the costs and benefits of collaboration in a specific ongoing project. We suggest questions and directions for such metrics, spanning the full lifespan of a collaborative project, from considering the suitability of collaboration through evaluating ongoing projects to final evaluation of the collaboration.

Predicting class testability using object-oriented metrics

OpenAIRE

Bruntink, Magiel; Deursen, Arie

2004-01-01

textabstractIn this paper we investigate factors of the testability of object-oriented software systems. The starting point is given by a study of the literature to obtain both an initial model of testability and existing OO metrics related to testability. Subsequently, these metrics are evaluated by means of two case studies of large Java systems for which JUnit test cases exist. The goal of this paper is to define and evaluate a set of metrics that can be used to assess the testability of t...

Software metrics a rigorous and practical approach

CERN Document Server

Fenton, Norman

2014-01-01

A Framework for Managing, Measuring, and Predicting Attributes of Software Development Products and ProcessesReflecting the immense progress in the development and use of software metrics in the past decades, Software Metrics: A Rigorous and Practical Approach, Third Edition provides an up-to-date, accessible, and comprehensive introduction to software metrics. Like its popular predecessors, this third edition discusses important issues, explains essential concepts, and offers new approaches for tackling long-standing problems.New to the Third EditionThis edition contains new material relevant

Do children with obesity have worse table manners? Associations between child table manners, weight status and weight gain.

Science.gov (United States)

Briones, Naomi F; Cesaro, Robert J; Appugliese, Danielle P; Miller, Alison L; Rosenblum, Katherine L; Pesch, Megan H

2018-06-01

Children with obesity experience stigma stemming from stereotypes, one such stereotype is that people with obesity are "sloppy" or have poor manners. Teaching children "proper table manners" has been proposed as an obesity prevention strategy. Little is known about the association between children's weight status and table manners. To examine correlates of child table manners and to examine the association of child table manners with child obese weight status and prospective change in child body mass index z-score (BMIz). Mother-child dyads (N = 228) participated in a videotaped laboratory eating task with cupcakes. Coding schemes to capture child table manners (making crumbs, chewing with mouth open, getting food on face, shoving food in mouth, slouching, and getting out of seat), and maternal attentiveness to child table manners, were reliably applied. Anthropometrics were measured at baseline and at follow-up two years later. Regression analyses examined the association of participant characteristics with child table manners, as well as the associations of child table manners with child obese weight status, and prospective change in BMIz/year. Predictors of poorer child table manners were younger child age, greater cupcake consumption, and greater maternal attentiveness to child table manners. Poorer child table manners were not associated with child obese (vs. not) weight status, but were associated with a prospective decrease in BMIz/year in children with overweight/obesity. Obesity interventions to improve table manners may be perpetuating unfavorable stereotypes and stigma. Future work investigating these associations is warranted to inform childhood obesity guidelines around table manners. Copyright © 2018 Elsevier Ltd. All rights reserved.

Coverage Metrics for Model Checking

Science.gov (United States)

Penix, John; Visser, Willem; Norvig, Peter (Technical Monitor)

2001-01-01

When using model checking to verify programs in practice, it is not usually possible to achieve complete coverage of the system. In this position paper we describe ongoing research within the Automated Software Engineering group at NASA Ames on the use of test coverage metrics to measure partial coverage and provide heuristic guidance for program model checking. We are specifically interested in applying and developing coverage metrics for concurrent programs that might be used to support certification of next generation avionics software.

Future of the PCI Readmission Metric.

Science.gov (United States)

Wasfy, Jason H; Yeh, Robert W

2016-03-01

Between 2013 and 2014, the Centers for Medicare and Medicaid Services and the National Cardiovascular Data Registry publically reported risk-adjusted 30-day readmission rates after percutaneous coronary intervention (PCI) as a pilot project. A key strength of this public reporting effort included risk adjustment with clinical rather than administrative data. Furthermore, because readmission after PCI is common, expensive, and preventable, this metric has substantial potential to improve quality and value in American cardiology care. Despite this, concerns about the metric exist. For example, few PCI readmissions are caused by procedural complications, limiting the extent to which improved procedural technique can reduce readmissions. Also, similar to other readmission measures, PCI readmission is associated with socioeconomic status and race. Accordingly, the metric may unfairly penalize hospitals that care for underserved patients. Perhaps in the context of these limitations, Centers for Medicare and Medicaid Services has not yet included PCI readmission among metrics that determine Medicare financial penalties. Nevertheless, provider organizations may still wish to focus on this metric to improve value for cardiology patients. PCI readmission is associated with low-risk chest discomfort and patient anxiety. Therefore, patient education, improved triage mechanisms, and improved care coordination offer opportunities to minimize PCI readmissions. Because PCI readmission is common and costly, reducing PCI readmission offers provider organizations a compelling target to improve the quality of care, and also performance in contracts involve shared financial risk. © 2016 American Heart Association, Inc.

Model assessment using a multi-metric ranking technique

Science.gov (United States)

Fitzpatrick, P. J.; Lau, Y.; Alaka, G.; Marks, F.

2017-12-01

Validation comparisons of multiple models presents challenges when skill levels are similar, especially in regimes dominated by the climatological mean. Assessing skill separation will require advanced validation metrics and identifying adeptness in extreme events, but maintain simplicity for management decisions. Flexibility for operations is also an asset. This work postulates a weighted tally and consolidation technique which ranks results by multiple types of metrics. Variables include absolute error, bias, acceptable absolute error percentages, outlier metrics, model efficiency, Pearson correlation, Kendall's Tau, reliability Index, multiplicative gross error, and root mean squared differences. Other metrics, such as root mean square difference and rank correlation were also explored, but removed when the information was discovered to be generally duplicative to other metrics. While equal weights are applied, weights could be altered depending for preferred metrics. Two examples are shown comparing ocean models' currents and tropical cyclone products, including experimental products. The importance of using magnitude and direction for tropical cyclone track forecasts instead of distance, along-track, and cross-track are discussed. Tropical cyclone intensity and structure prediction are also assessed. Vector correlations are not included in the ranking process, but found useful in an independent context, and will be briefly reported.

Metric learning for DNA microarray data analysis

International Nuclear Information System (INIS)

Takeuchi, Ichiro; Nakagawa, Masao; Seto, Masao

2009-01-01

In many microarray studies, gene set selection is an important preliminary step for subsequent main task such as tumor classification, cancer subtype identification, etc. In this paper, we investigate the possibility of using metric learning as an alternative to gene set selection. We develop a simple metric learning algorithm aiming to use it for microarray data analysis. Exploiting a property of the algorithm, we introduce a novel approach for extending the metric learning to be adaptive. We apply the algorithm to previously studied microarray data on malignant lymphoma subtype identification.

Status of the pit disassembly and conversion facility

International Nuclear Information System (INIS)

Wood, Warren T.; Christensen, Lowell T.

2000-01-01

A planned new facility, the Pit Disassembly and Conversion Facility (PDCF), will be used to disassemble the nation's inventory of surplus nuclear weapons pits and convert the plutonium from those pits into a form suitable for storage, international inspection, and final disposition. Sized to handle 35 metric tons of plutonium from pits and other sources over its 10-year operating life, the PDCF will apply the Advanced Recovery and Integrated Extraction System (ARIES) technology. ARIES process technology has been developed at Los Alamos National Laboratory (LANL) and Lawrence Livermore National Laboratory (LLNL), and an integrated system is being demonstrated at LANL. The Los Alamos National Laboratory is the lead for technical design oversight of the PDCF. Technical data gained from the ARIES demonstrations is integral for the proper design of the PDCF

Comparison of luminance based metrics in different lighting conditions

DEFF Research Database (Denmark)

Wienold, J.; Kuhn, T.E.; Christoffersen, J.

In this study, we evaluate established and newly developed metrics for predicting glare using data from three different research studies. The evaluation covers two different targets: 1. How well the user’s perception of glare magnitude correlates to the prediction of the glare metrics? 2. How well...... do the glare metrics describe the subjects’ disturbance by glare? We applied Spearman correlations, logistic regressions and an accuracy evaluation, based on an ROC-analysis. The results show that five of the twelve investigated metrics are failing at least one of the statistical tests. The other...... seven metrics CGI, modified DGI, DGP, Ev, average Luminance of the image Lavg, UGP and UGR are passing all statistical tests. DGP, CGI, DGI_mod and UGP have largest AUC and might be slightly more robust. The accuracy of the predictions of afore mentioned seven metrics for the disturbance by glare lies...

A bi-metric theory of gravitation

International Nuclear Information System (INIS)

Rosen, N.

1975-01-01

The bi-metric theory of gravitation proposed previously is simplified in that the auxiliary conditions are discarded, the two metric tensors being tied together only by means of the boundary conditions. Some of the properties of the field of a particle are investigated; there is no black hole, and it appears that no gravitational collapse can take place. Although the proposed theory and general relativity are at present observationally indistinguishable, some differences are pointed out which may some day be susceptible of observation. An alternative bi-metric theory is considered which gives for the precession of the perihelion 5/6 of the value given by general relativity; it seems less satisfactory than the present theory from the aesthetic point of view. (author)

Table Tennis Club

CERN Multimedia

Table Tennis Club

2012-01-01

The CERN Table Tennis club and the Meyrin CTT are organizing two Table Tennis workshops from 2 to 6 July and from 20 to 24 August 2012 inclusive in Meyrin. A professional would be with your children from 14.00 pm to 18.00 pm: an instructor J + S category A. Training courses with specific themes, individual courses would be given depending on the level of the child’s game, “discoveries –table tennis games” courses and games with the robot. Other activities (stretching, relaxation). Afternoons (from 18 to 20 children): 40 CHF per workshop and per child. Evenings (from 18 to 20 adults): 60 CHF per workshop and per adult. For further information, please contact Mr. Monteil : Mobile: (+33) 06 61 31 70 47 E-mail: wilfried.monteil@free.fr.

Prioritizing Urban Habitats for Connectivity Conservation: Integrating Centrality and Ecological Metrics.

Science.gov (United States)

Poodat, Fatemeh; Arrowsmith, Colin; Fraser, David; Gordon, Ascelin

2015-09-01

Connectivity among fragmented areas of habitat has long been acknowledged as important for the viability of biological conservation, especially within highly modified landscapes. Identifying important habitat patches in ecological connectivity is a priority for many conservation strategies, and the application of 'graph theory' has been shown to provide useful information on connectivity. Despite the large number of metrics for connectivity derived from graph theory, only a small number have been compared in terms of the importance they assign to nodes in a network. This paper presents a study that aims to define a new set of metrics and compares these with traditional graph-based metrics, used in the prioritization of habitat patches for ecological connectivity. The metrics measured consist of "topological" metrics, "ecological metrics," and "integrated metrics," Integrated metrics are a combination of topological and ecological metrics. Eight metrics were applied to the habitat network for the fat-tailed dunnart within Greater Melbourne, Australia. A non-directional network was developed in which nodes were linked to adjacent nodes. These links were then weighted by the effective distance between patches. By applying each of the eight metrics for the study network, nodes were ranked according to their contribution to the overall network connectivity. The structured comparison revealed the similarity and differences in the way the habitat for the fat-tailed dunnart was ranked based on different classes of metrics. Due to the differences in the way the metrics operate, a suitable metric should be chosen that best meets the objectives established by the decision maker.

Comparative Study of Trace Metrics between Bibliometrics and Patentometrics

Directory of Open Access Journals (Sweden)

Fred Y. Ye

2016-06-01

Full Text Available Purpose: To comprehensively evaluate the overall performance of a group or an individual in both bibliometrics and patentometrics. Design/methodology/approach: Trace metrics were applied to the top 30 universities in the 2014 Academic Ranking of World Universities (ARWU — computer sciences, the top 30 ESI highly cited papers in the computer sciences field in 2014, as well as the top 30 assignees and the top 30 most cited patents in the National Bureau of Economic Research (NBER computer hardware and software category. Findings: We found that, by applying trace metrics, the research or marketing impact efficiency, at both group and individual levels, was clearly observed. Furthermore, trace metrics were more sensitive to the different publication-citation distributions than the average citation and h-index were. Research limitations: Trace metrics considered publications with zero citations as negative contributions. One should clarify how he/she evaluates a zero-citation paper or patent before applying trace metrics. Practical implications: Decision makers could regularly examinine the performance of their university/company by applying trace metrics and adjust their policies accordingly. Originality/value: Trace metrics could be applied both in bibliometrics and patentometrics and provide a comprehensive view. Moreover, the high sensitivity and unique impact efficiency view provided by trace metrics can facilitate decision makers in examining and adjusting their policies.

Evaluating and Estimating the WCET Criticality Metric

DEFF Research Database (Denmark)

Jordan, Alexander

2014-01-01

a programmer (or compiler) from targeting optimizations the right way. A possible resort is to use a metric that targets WCET and which can be efficiently computed for all code parts of a program. Similar to dynamic profiling techniques, which execute code with input that is typically expected...... for the application, based on WCET analysis we can indicate how critical a code fragment is, in relation to the worst-case bound. Computing such a metric on top of static analysis, incurs a certain overhead though, which increases with the complexity of the underlying WCET analysis. We present our approach...... to estimate the Criticality metric, by relaxing the precision of WCET analysis. Through this, we can reduce analysis time by orders of magnitude, while only introducing minor error. To evaluate our estimation approach and share our garnered experience using the metric, we evaluate real-time programs, which...

The 2005 CHF look-up table

International Nuclear Information System (INIS)

Groeneveld, D.C.; Vasic, A.Z.; Leung, L.K.H.; Durmayaz, A.; Shan, J.Q.; Yang, J.; Cheng, S.C.

2005-01-01

Full text of publication follows: CHF Look-up tables have been used widely for the prediction of the Critical Heat Flux (CHF) The CHF look-up table is basically a normalized data bank. The first CHF look-up table was constructed by Doroshchuk et al. (1975), using a limited database of 5 000 data points. This table, and all subsequent tables, contain normalized CHF values for a vertical 8 mm water-cooled tube for various pressures, mass fluxes and qualities. The CHF table development work has since been in progress at various institutions (e.g. CENG-Grenoble, University of Ottawa (UO), Ottawa, IPPE, Obninsk, and AECL, Chalk River) using an ever increasing data base. The 1995 CHF look-up table employs a data base containing about 30 000 CHF points and provides CHF values for an 8 mm ID, water-cooled tube, for 19 pressures, 20 mass fluxes, and 23 qualities. covering the full range of conditions of practical interest. The 2005 CHF LUT is an update to the 1995 LUT and addresses several concerns raised in the literature. The major improvements made are: - enhancement of the quality of the data base of the CHF look-up table (identify outliers, improve screening procedures); - increase in the data base by adding recently obtained data; - employment of greater subdivision of the look-up table by using smaller intervals in the independent parameters (pressure, mass flux and quality) at conditions where the variation in CHF is significant; - improvement of the smoothness of the CHF look-up table. This was done by the use of logarithmic functions for CHF, using optimum Spline functions etc. A discussion of the impact of these changes on the prediction accuracy and table smoothness is presented. It will be shown that the 2005 CHF look-up table is characterized by a significant improvement in accuracy and smoothness. [1] D. Groeneveld is the corresponding author. He is an Adjunct Professor at the University of Ottawa. (authors)

A convergence theory for probabilistic metric spaces | Jäger ...

African Journals Online (AJOL)

We develop a theory of probabilistic convergence spaces based on Tardiff's neighbourhood systems for probabilistic metric spaces. We show that the resulting category is a topological universe and we characterize a subcategory that is isomorphic to the category of probabilistic metric spaces. Keywords: Probabilistic metric ...

Geothermal energy conversion facility

Energy Technology Data Exchange (ETDEWEB)

Kutscher, C.F.

1997-12-31

With the termination of favorable electricity generation pricing policies, the geothermal industry is exploring ways to improve the efficiency of existing plants and make them more cost-competitive with natural gas. The Geothermal Energy Conversion Facility (GECF) at NREL will allow researchers to study various means for increasing the thermodynamic efficiency of binary cycle geothermal plants. This work has received considerable support from the US geothermal industry and will be done in collaboration with industry members and utilities. The GECF is being constructed on NREL property at the top of South Table Mountain in Golden, Colorado. As shown in Figure 1, it consists of an electrically heated hot water loop that provides heating to a heater/vaporizer in which the working fluid vaporizes at supercritical or subcritical pressures as high as 700 psia. Both an air-cooled and water-cooled condenser will be available for condensing the working fluid. In order to minimize construction costs, available equipment from the similar INEL Heat Cycle Research Facility is being utilized.

Indefinite metric fields and the renormalization group

International Nuclear Information System (INIS)

Sherry, T.N.

1976-11-01

The renormalization group equations are derived for the Green functions of an indefinite metric field theory. In these equations one retains the mass dependence of the coefficient functions, since in the indefinite metric theories the masses cannot be neglected. The behavior of the effective coupling constant in the asymptotic and infrared limits is analyzed. The analysis is illustrated by means of a simple model incorporating indefinite metric fields. The model scales at first order, and at this order also the effective coupling constant has both ultra-violet and infra-red fixed points, the former being the bare coupling constant

Kerr-Newman metric in deSitter background

International Nuclear Information System (INIS)

Patel, L.K.; Koppar, S.S.; Bhatt, P.V.

1987-01-01

In addition to the Kerr-Newman metric with cosmological constant several other metrics are presented giving Kerr-Newman type solutions of Einstein-Maxwell field equations in the background of deSitter universe. The electromagnetic field in all the solutions is assumed to be source-free. A new metric of what may be termed as an electrovac rotating deSitter space-time- a space-time devoid of matter but containing source-free electromagnetic field and a null fluid with twisting rays-has been presented. In the absence of the electromagnetic field, these solutions reduce to those discussed by Vaidya (1984). 8 refs. (author)

The independence of software metrics taken at different life-cycle stages

Science.gov (United States)

Kafura, D.; Canning, J.; Reddy, G.

1984-01-01

Over the past few years a large number of software metrics have been proposed and, in varying degrees, a number of these metrics have been subjected to empirical validation which demonstrated the utility of the metrics in the software development process. Attempts to classify these metrics and to determine if the metrics in these different classes appear to be measuring distinct attributes of the software product are studied. Statistical analysis is used to determine the degree of relationship among the metrics.

Thermodynamic metrics and optimal paths.

Science.gov (United States)

Sivak, David A; Crooks, Gavin E

2012-05-11

A fundamental problem in modern thermodynamics is how a molecular-scale machine performs useful work, while operating away from thermal equilibrium without excessive dissipation. To this end, we derive a friction tensor that induces a Riemannian manifold on the space of thermodynamic states. Within the linear-response regime, this metric structure controls the dissipation of finite-time transformations, and bestows optimal protocols with many useful properties. We discuss the connection to the existing thermodynamic length formalism, and demonstrate the utility of this metric by solving for optimal control parameter protocols in a simple nonequilibrium model.

Invariant metrics for Hamiltonian systems

International Nuclear Information System (INIS)

Rangarajan, G.; Dragt, A.J.; Neri, F.

1991-05-01

In this paper, invariant metrics are constructed for Hamiltonian systems. These metrics give rise to norms on the space of homeogeneous polynomials of phase-space variables. For an accelerator lattice described by a Hamiltonian, these norms characterize the nonlinear content of the lattice. Therefore, the performance of the lattice can be improved by minimizing the norm as a function of parameters describing the beam-line elements in the lattice. A four-fold increase in the dynamic aperture of a model FODO cell is obtained using this procedure. 7 refs

Steiner trees for fixed orientation metrics

DEFF Research Database (Denmark)

Brazil, Marcus; Zachariasen, Martin

2009-01-01

We consider the problem of constructing Steiner minimum trees for a metric defined by a polygonal unit circle (corresponding to s = 2 weighted legal orientations in the plane). A linear-time algorithm to enumerate all angle configurations for degree three Steiner points is given. We provide...... a simple proof that the angle configuration for a Steiner point extends to all Steiner points in a full Steiner minimum tree, such that at most six orientations suffice for edges in a full Steiner minimum tree. We show that the concept of canonical forms originally introduced for the uniform orientation...... metric generalises to the fixed orientation metric. Finally, we give an O(s n) time algorithm to compute a Steiner minimum tree for a given full Steiner topology with n terminal leaves....

Metric Learning for Hyperspectral Image Segmentation

Science.gov (United States)

Bue, Brian D.; Thompson, David R.; Gilmore, Martha S.; Castano, Rebecca

2011-01-01

We present a metric learning approach to improve the performance of unsupervised hyperspectral image segmentation. Unsupervised spatial segmentation can assist both user visualization and automatic recognition of surface features. Analysts can use spatially-continuous segments to decrease noise levels and/or localize feature boundaries. However, existing segmentation methods use tasks-agnostic measures of similarity. Here we learn task-specific similarity measures from training data, improving segment fidelity to classes of interest. Multiclass Linear Discriminate Analysis produces a linear transform that optimally separates a labeled set of training classes. The defines a distance metric that generalized to a new scenes, enabling graph-based segmentation that emphasizes key spectral features. We describe tests based on data from the Compact Reconnaissance Imaging Spectrometer (CRISM) in which learned metrics improve segment homogeneity with respect to mineralogical classes.

Validation of Metrics as Error Predictors

Science.gov (United States)

Mendling, Jan

In this chapter, we test the validity of metrics that were defined in the previous chapter for predicting errors in EPC business process models. In Section 5.1, we provide an overview of how the analysis data is generated. Section 5.2 describes the sample of EPCs from practice that we use for the analysis. Here we discuss a disaggregation by the EPC model group and by error as well as a correlation analysis between metrics and error. Based on this sample, we calculate a logistic regression model for predicting error probability with the metrics as input variables in Section 5.3. In Section 5.4, we then test the regression function for an independent sample of EPC models from textbooks as a cross-validation. Section 5.5 summarizes the findings.

Predicting class testability using object-oriented metrics

NARCIS (Netherlands)

M. Bruntink (Magiel); A. van Deursen (Arie)

2004-01-01

textabstractIn this paper we investigate factors of the testability of object-oriented software systems. The starting point is given by a study of the literature to obtain both an initial model of testability and existing OO metrics related to testability. Subsequently, these metrics are evaluated

Software Power Metric Model: An Implementation | Akwukwuma ...

African Journals Online (AJOL)

... and the execution time (TIME) in each case was recorded. We then obtain the application functions point count. Our result shows that the proposed metric is computable, consistent in its use of unit, and is programming language independent. Keywords: Software attributes, Software power, measurement, Software metric, ...

Meter Detection in Symbolic Music Using Inner Metric Analysis

NARCIS (Netherlands)

de Haas, W.B.; Volk, A.

2016-01-01

In this paper we present PRIMA: a new model tailored to symbolic music that detects the meter and the first downbeat position of a piece. Given onset data, the metrical structure of a piece is interpreted using the Inner Metric Analysis (IMA) model. IMA identifies the strong and weak metrical

Performance metrics for the evaluation of hyperspectral chemical identification systems

Science.gov (United States)

Truslow, Eric; Golowich, Steven; Manolakis, Dimitris; Ingle, Vinay

2016-02-01

Remote sensing of chemical vapor plumes is a difficult but important task for many military and civilian applications. Hyperspectral sensors operating in the long-wave infrared regime have well-demonstrated detection capabilities. However, the identification of a plume's chemical constituents, based on a chemical library, is a multiple hypothesis testing problem which standard detection metrics do not fully describe. We propose using an additional performance metric for identification based on the so-called Dice index. Our approach partitions and weights a confusion matrix to develop both the standard detection metrics and identification metric. Using the proposed metrics, we demonstrate that the intuitive system design of a detector bank followed by an identifier is indeed justified when incorporating performance information beyond the standard detection metrics.

Curvature properties of four-dimensional Walker metrics

International Nuclear Information System (INIS)

Chaichi, M; Garcia-Rio, E; Matsushita, Y

2005-01-01

A Walker n-manifold is a semi-Riemannian manifold, which admits a field of parallel null r-planes, r ≤ n/2. In the present paper we study curvature properties of a Walker 4-manifold (M, g) which admits a field of parallel null 2-planes. The metric g is necessarily of neutral signature (+ + - -). Such a Walker 4-manifold is the lowest dimensional example not of Lorentz type. There are three functions of coordinates which define a Walker metric. Some recent work shows that a Walker 4-manifold of restricted type whose metric is characterized by two functions exhibits a large variety of symplectic structures, Hermitian structures, Kaehler structures, etc. For such a restricted Walker 4-manifold, we shall study mainly curvature properties, e.g., conditions for a Walker metric to be Einstein, Osserman, or locally conformally flat, etc. One of our main results is the exact solutions to the Einstein equations for a restricted Walker 4-manifold

Decision Analysis for Metric Selection on a Clinical Quality Scorecard.

Science.gov (United States)

Guth, Rebecca M; Storey, Patricia E; Vitale, Michael; Markan-Aurora, Sumita; Gordon, Randolph; Prevost, Traci Q; Dunagan, Wm Claiborne; Woeltje, Keith F

2016-09-01

Clinical quality scorecards are used by health care institutions to monitor clinical performance and drive quality improvement. Because of the rapid proliferation of quality metrics in health care, BJC HealthCare found it increasingly difficult to select the most impactful scorecard metrics while still monitoring metrics for regulatory purposes. A 7-step measure selection process was implemented incorporating Kepner-Tregoe Decision Analysis, which is a systematic process that considers key criteria that must be satisfied in order to make the best decision. The decision analysis process evaluates what metrics will most appropriately fulfill these criteria, as well as identifies potential risks associated with a particular metric in order to identify threats to its implementation. Using this process, a list of 750 potential metrics was narrowed to 25 that were selected for scorecard inclusion. This decision analysis process created a more transparent, reproducible approach for selecting quality metrics for clinical quality scorecards. © The Author(s) 2015.

Evaluation of environmental-control technologies for commercial nuclear fuel-conversion (UF6) facilities

International Nuclear Information System (INIS)

Perkins, B.L.

1982-10-01

At present in the United States, there are two commercial conversion facilities. These facilities process uranium concentrate into UF 6 for shipment to the enrichment facilities. One conversion facility uses a dry hydrofluor process, whereas the other facility uses a process known as the wet solvent extraction-fluorination process. Because of the different processes used in the two plants, waste characteristics, quantities, and treatment practices differ at each facility. Wastes and effluent streams contain impurities found in the concentrate (such as uranium daughters, vanadium, molybdenum, selenium, arsenic, and ammonia) and process chemicals used in the circuit (including fluorine, nitrogen, and hydrogen), as well as small quantities of uranium. Studies of suitable disposal options for the solid wastes and sludges generated at the facilities and the long-term effects of emissions to the ambient environment are needed. 30 figures, 34 tables

Common fixed point theorems in intuitionistic fuzzy metric spaces and L-fuzzy metric spaces with nonlinear contractive condition

International Nuclear Information System (INIS)

Jesic, Sinisa N.; Babacev, Natasa A.

2008-01-01

The purpose of this paper is to prove some common fixed point theorems for a pair of R-weakly commuting mappings defined on intuitionistic fuzzy metric spaces [Park JH. Intuitionistic fuzzy metric spaces. Chaos, Solitons and Fractals 2004;22:1039-46] and L-fuzzy metric spaces [Saadati R, Razani A, Adibi H. A common fixed point theorem in L-fuzzy metric spaces. Chaos, Solitons and Fractals, doi:10.1016/j.chaos.2006.01.023], with nonlinear contractive condition, defined with function, first observed by Boyd and Wong [Boyd DW, Wong JSW. On nonlinear contractions. Proc Am Math Soc 1969;20:458-64]. Following Pant [Pant RP. Common fixed points of noncommuting mappings. J Math Anal Appl 1994;188:436-40] we define R-weak commutativity for a pair of mappings and then prove the main results. These results generalize some known results due to Saadati et al., and Jungck [Jungck G. Commuting maps and fixed points. Am Math Mon 1976;83:261-3]. Some examples and comments according to the preceding results are given

43 CFR 12.915 - Metric system of measurement.

Science.gov (United States)

2010-10-01

... procurements, grants, and other business-related activities. Metric implementation may take longer where the... recipient, such as when foreign competitors are producing competing products in non-metric units. (End of...

Cophenetic metrics for phylogenetic trees, after Sokal and Rohlf.

Science.gov (United States)

Cardona, Gabriel; Mir, Arnau; Rosselló, Francesc; Rotger, Lucía; Sánchez, David

2013-01-16

Phylogenetic tree comparison metrics are an important tool in the study of evolution, and hence the definition of such metrics is an interesting problem in phylogenetics. In a paper in Taxon fifty years ago, Sokal and Rohlf proposed to measure quantitatively the difference between a pair of phylogenetic trees by first encoding them by means of their half-matrices of cophenetic values, and then comparing these matrices. This idea has been used several times since then to define dissimilarity measures between phylogenetic trees but, to our knowledge, no proper metric on weighted phylogenetic trees with nested taxa based on this idea has been formally defined and studied yet. Actually, the cophenetic values of pairs of different taxa alone are not enough to single out phylogenetic trees with weighted arcs or nested taxa. For every (rooted) phylogenetic tree T, let its cophenetic vectorφ(T) consist of all pairs of cophenetic values between pairs of taxa in T and all depths of taxa in T. It turns out that these cophenetic vectors single out weighted phylogenetic trees with nested taxa. We then define a family of cophenetic metrics dφ,p by comparing these cophenetic vectors by means of Lp norms, and we study, either analytically or numerically, some of their basic properties: neighbors, diameter, distribution, and their rank correlation with each other and with other metrics. The cophenetic metrics can be safely used on weighted phylogenetic trees with nested taxa and no restriction on degrees, and they can be computed in O(n2) time, where n stands for the number of taxa. The metrics dφ,1 and dφ,2 have positive skewed distributions, and they show a low rank correlation with the Robinson-Foulds metric and the nodal metrics, and a very high correlation with each other and with the splitted nodal metrics. The diameter of dφ,p, for p⩾1 , is in O(n(p+2)/p), and thus for low p they are more discriminative, having a wider range of values.

Finite Metric Spaces of Strictly negative Type

DEFF Research Database (Denmark)

Hjorth, Poul G.

If a finite metric space is of strictly negative type then its transfinite diameter is uniquely realized by an infinite extent (“load vector''). Finite metric spaces that have this property include all trees, and all finite subspaces of Euclidean and Hyperbolic spaces. We prove that if the distance...

Gravitational Metric Tensor Exterior to Rotating Homogeneous ...

African Journals Online (AJOL)

The covariant and contravariant metric tensors exterior to a homogeneous spherical body rotating uniformly about a common φ axis with constant angular velocity ω is constructed. The constructed metric tensors in this gravitational field have seven non-zero distinct components.The Lagrangian for this gravitational field is ...

Exact solutions of strong gravity in generalized metrics

International Nuclear Information System (INIS)

Hojman, R.; Smailagic, A.

1981-05-01

We consider classical solutions for the strong gravity theory of Salam and Strathdee in a wider class of metrics with positive, zero and negative curvature. It turns out that such solutions exist and their relevance for quark confinement is explored. Only metrics with positive curvature (spherical symmetry) give a confining potential in a simple picture of the scalar hadron. This supports the idea of describing the hadron as a closed microuniverse of the strong metric. (author)

Development of quality metrics for ambulatory pediatric cardiology: Infection prevention.

Science.gov (United States)

Johnson, Jonathan N; Barrett, Cindy S; Franklin, Wayne H; Graham, Eric M; Halnon, Nancy J; Hattendorf, Brandy A; Krawczeski, Catherine D; McGovern, James J; O'Connor, Matthew J; Schultz, Amy H; Vinocur, Jeffrey M; Chowdhury, Devyani; Anderson, Jeffrey B

2017-12-01

In 2012, the American College of Cardiology's (ACC) Adult Congenital and Pediatric Cardiology Council established a program to develop quality metrics to guide ambulatory practices for pediatric cardiology. The council chose five areas on which to focus their efforts; chest pain, Kawasaki Disease, tetralogy of Fallot, transposition of the great arteries after arterial switch, and infection prevention. Here, we sought to describe the process, evaluation, and results of the Infection Prevention Committee's metric design process. The infection prevention metrics team consisted of 12 members from 11 institutions in North America. The group agreed to work on specific infection prevention topics including antibiotic prophylaxis for endocarditis, rheumatic fever, and asplenia/hyposplenism; influenza vaccination and respiratory syncytial virus prophylaxis (palivizumab); preoperative methods to reduce intraoperative infections; vaccinations after cardiopulmonary bypass; hand hygiene; and testing to identify splenic function in patients with heterotaxy. An extensive literature review was performed. When available, previously published guidelines were used fully in determining metrics. The committee chose eight metrics to submit to the ACC Quality Metric Expert Panel for review. Ultimately, metrics regarding hand hygiene and influenza vaccination recommendation for patients did not pass the RAND analysis. Both endocarditis prophylaxis metrics and the RSV/palivizumab metric passed the RAND analysis but fell out during the open comment period. Three metrics passed all analyses, including those for antibiotic prophylaxis in patients with heterotaxy/asplenia, for influenza vaccination compliance in healthcare personnel, and for adherence to recommended regimens of secondary prevention of rheumatic fever. The lack of convincing data to guide quality improvement initiatives in pediatric cardiology is widespread, particularly in infection prevention. Despite this, three metrics were

A new form of the rotating C-metric

International Nuclear Information System (INIS)

Hong, Kenneth; Teo, Edward

2005-01-01

In a previous paper, we showed that the traditional form of the charged C-metric can be transformed, by a change of coordinates, into one with an explicitly factorizable structure function. This new form of the C-metric has the advantage that its properties become much simpler to analyse. In this paper, we propose an analogous new form for the rotating charged C-metric, with structure function G(ξ) = (1 - ξ 2 )(1 + r + Aξ)(1 + r - Aξ), where r ± are the usual locations of the horizons in the Kerr-Newman black hole. Unlike the non-rotating case, this new form is not related to the traditional one by a coordinate transformation. We show that the physical distinction between these two forms of the rotating C-metric lies in the nature of the conical singularities causing the black holes to accelerate apart: the new form is free of torsion singularities and therefore does not contain any closed timelike curves. We claim that this new form should be considered the natural generalization of the C-metric with rotation

[Clinical trial data management and quality metrics system].

Science.gov (United States)

Chen, Zhao-hua; Huang, Qin; Deng, Ya-zhong; Zhang, Yue; Xu, Yu; Yu, Hao; Liu, Zong-fan

2015-11-01

Data quality management system is essential to ensure accurate, complete, consistent, and reliable data collection in clinical research. This paper is devoted to various choices of data quality metrics. They are categorized by study status, e.g. study start up, conduct, and close-out. In each category, metrics for different purposes are listed according to ALCOA+ principles such us completeness, accuracy, timeliness, traceability, etc. Some general quality metrics frequently used are also introduced. This paper contains detail information as much as possible to each metric by providing definition, purpose, evaluation, referenced benchmark, and recommended targets in favor of real practice. It is important that sponsors and data management service providers establish a robust integrated clinical trial data quality management system to ensure sustainable high quality of clinical trial deliverables. It will also support enterprise level of data evaluation and bench marking the quality of data across projects, sponsors, data management service providers by using objective metrics from the real clinical trials. We hope this will be a significant input to accelerate the improvement of clinical trial data quality in the industry.

Sigma Routing Metric for RPL Protocol

Directory of Open Access Journals (Sweden)

Paul Sanmartin

2018-04-01

Full Text Available This paper presents the adaptation of a specific metric for the RPL protocol in the objective function MRHOF. Among the functions standardized by IETF, we find OF0, which is based on the minimum hop count, as well as MRHOF, which is based on the Expected Transmission Count (ETX. However, when the network becomes denser or the number of nodes increases, both OF0 and MRHOF introduce long hops, which can generate a bottleneck that restricts the network. The adaptation is proposed to optimize both OFs through a new routing metric. To solve the above problem, the metrics of the minimum number of hops and the ETX are combined by designing a new routing metric called SIGMA-ETX, in which the best route is calculated using the standard deviation of ETX values between each node, as opposed to working with the ETX average along the route. This method ensures a better routing performance in dense sensor networks. The simulations are done through the Cooja simulator, based on the Contiki operating system. The simulations showed that the proposed optimization outperforms at a high margin in both OF0 and MRHOF, in terms of network latency, packet delivery ratio, lifetime, and power consumption.

Socio-Technical Security Metrics (Dagstuhl Seminar 14491)

NARCIS (Netherlands)

Gollmann, Dieter; Herley, Cormac; Koenig, Vincent; Pieters, Wolter; Sasse, Martina Angela

2015-01-01

This report documents the program and the outcomes of Dagstuhl Seminar 14491 "Socio-Technical Security Metrics". In the domain of safety, metrics inform many decisions, from the height of new dikes to the design of nuclear plants. We can state, for example, that the dikes should be high enough to

Landscape metrics for three-dimension urban pattern recognition

Science.gov (United States)

Liu, M.; Hu, Y.; Zhang, W.; Li, C.

2017-12-01

Understanding how landscape pattern determines population or ecosystem dynamics is crucial for managing our landscapes. Urban areas are becoming increasingly dominant social-ecological systems, so it is important to understand patterns of urbanization. Most studies of urban landscape pattern examine land-use maps in two dimensions because the acquisition of 3-dimensional information is difficult. We used Brista software based on Quickbird images and aerial photos to interpret the height of buildings, thus incorporating a 3-dimensional approach. We estimated the feasibility and accuracy of this approach. A total of 164,345 buildings in the Liaoning central urban agglomeration of China, which included seven cities, were measured. Twelve landscape metrics were proposed or chosen to describe the urban landscape patterns in 2- and 3-dimensional scales. The ecological and social meaning of landscape metrics were analyzed with multiple correlation analysis. The results showed that classification accuracy compared with field surveys was 87.6%, which means this method for interpreting building height was acceptable. The metrics effectively reflected the urban architecture in relation to number of buildings, area, height, 3-D shape and diversity aspects. We were able to describe the urban characteristics of each city with these metrics. The metrics also captured ecological and social meanings. The proposed landscape metrics provided a new method for urban landscape analysis in three dimensions.

SOCIAL METRICS APPLIED TO SMART TOURISM

Directory of Open Access Journals (Sweden)

O. Cervantes

2016-09-01

Full Text Available We present a strategy to make productive use of semantically-related social data, from a user-centered semantic network, in order to help users (tourists and citizens in general to discover cultural heritage, points of interest and available services in a smart city. This data can be used to personalize recommendations in a smart tourism application. Our approach is based on flow centrality metrics typically used in social network analysis: flow betweenness, flow closeness and eccentricity. These metrics are useful to discover relevant nodes within the network yielding nodes that can be interpreted as suggestions (venues or services to users. We describe the semantic network built on graph model, as well as social metrics algorithms used to produce recommendations. We also present challenges and results from a prototypical implementation applied to the case study of the City of Puebla, Mexico.

Social Metrics Applied to Smart Tourism

Science.gov (United States)

Cervantes, O.; Gutiérrez, E.; Gutiérrez, F.; Sánchez, J. A.

2016-09-01

We present a strategy to make productive use of semantically-related social data, from a user-centered semantic network, in order to help users (tourists and citizens in general) to discover cultural heritage, points of interest and available services in a smart city. This data can be used to personalize recommendations in a smart tourism application. Our approach is based on flow centrality metrics typically used in social network analysis: flow betweenness, flow closeness and eccentricity. These metrics are useful to discover relevant nodes within the network yielding nodes that can be interpreted as suggestions (venues or services) to users. We describe the semantic network built on graph model, as well as social metrics algorithms used to produce recommendations. We also present challenges and results from a prototypical implementation applied to the case study of the City of Puebla, Mexico.

Reproducibility of graph metrics of human brain functional networks.

Science.gov (United States)

Deuker, Lorena; Bullmore, Edward T; Smith, Marie; Christensen, Soren; Nathan, Pradeep J; Rockstroh, Brigitte; Bassett, Danielle S

2009-10-01

Graph theory provides many metrics of complex network organization that can be applied to analysis of brain networks derived from neuroimaging data. Here we investigated the test-retest reliability of graph metrics of functional networks derived from magnetoencephalography (MEG) data recorded in two sessions from 16 healthy volunteers who were studied at rest and during performance of the n-back working memory task in each session. For each subject's data at each session, we used a wavelet filter to estimate the mutual information (MI) between each pair of MEG sensors in each of the classical frequency intervals from gamma to low delta in the overall range 1-60 Hz. Undirected binary graphs were generated by thresholding the MI matrix and 8 global network metrics were estimated: the clustering coefficient, path length, small-worldness, efficiency, cost-efficiency, assortativity, hierarchy, and synchronizability. Reliability of each graph metric was assessed using the intraclass correlation (ICC). Good reliability was demonstrated for most metrics applied to the n-back data (mean ICC=0.62). Reliability was greater for metrics in lower frequency networks. Higher frequency gamma- and beta-band networks were less reliable at a global level but demonstrated high reliability of nodal metrics in frontal and parietal regions. Performance of the n-back task was associated with greater reliability than measurements on resting state data. Task practice was also associated with greater reliability. Collectively these results suggest that graph metrics are sufficiently reliable to be considered for future longitudinal studies of functional brain network changes.

Evaluation metrics for biostatistical and epidemiological collaborations.

Science.gov (United States)

Rubio, Doris McGartland; Del Junco, Deborah J; Bhore, Rafia; Lindsell, Christopher J; Oster, Robert A; Wittkowski, Knut M; Welty, Leah J; Li, Yi-Ju; Demets, Dave

2011-10-15

Increasing demands for evidence-based medicine and for the translation of biomedical research into individual and public health benefit have been accompanied by the proliferation of special units that offer expertise in biostatistics, epidemiology, and research design (BERD) within academic health centers. Objective metrics that can be used to evaluate, track, and improve the performance of these BERD units are critical to their successful establishment and sustainable future. To develop a set of reliable but versatile metrics that can be adapted easily to different environments and evolving needs, we consulted with members of BERD units from the consortium of academic health centers funded by the Clinical and Translational Science Award Program of the National Institutes of Health. Through a systematic process of consensus building and document drafting, we formulated metrics that covered the three identified domains of BERD practices: the development and maintenance of collaborations with clinical and translational science investigators, the application of BERD-related methods to clinical and translational research, and the discovery of novel BERD-related methodologies. In this article, we describe the set of metrics and advocate their use for evaluating BERD practices. The routine application, comparison of findings across diverse BERD units, and ongoing refinement of the metrics will identify trends, facilitate meaningful changes, and ultimately enhance the contribution of BERD activities to biomedical research. Copyright © 2011 John Wiley & Sons, Ltd.

Half-life distribution table of radioactive nuclei; Table de distribution des periodes des noyaux radioactifs

Energy Technology Data Exchange (ETDEWEB)

Gugenberger, P [Commissariat a l' Energie Atomique, Saclay(France). Centre d' Etudes Nucleaires

1954-07-01

This table allows to identify an element if its period is known. Data for this table were taken from the half-life values adopted by Hollander, PERLMAN and SEABORG (Rev. mod. Phys., 1953, 22 number 2). Moreover for each nucleus, the mass number, the charge number and the type of decay are given in the table. (author) [French] Cette table permet l'identification d'un element dont la periode est connue. Elle a ete etablie en utilisant les valeurs des periodes donnees par HOLLANDER, PERLMAN et SEABORG dans Rev. mod. Phys., 1953, 25 numero 2. On y trouve en outre, pour chaque nuclide, les caracteristiques suivantes: Z, A, modes de desintegration. (auteur)

Half-life distribution table of radioactive nuclei; Table de distribution des periodes des noyaux radioactifs

Energy Technology Data Exchange (ETDEWEB)

Gugenberger, P. [Commissariat a l' Energie Atomique, Saclay(France). Centre d' Etudes Nucleaires

1954-07-01

This table allows to identify an element if its period is known. Data for this table were taken from the half-life values adopted by Hollander, PERLMAN and SEABORG (Rev. mod. Phys., 1953, 22 number 2). Moreover for each nucleus, the mass number, the charge number and the type of decay are given in the table. (author) [French] Cette table permet l'identification d'un element dont la periode est connue. Elle a ete etablie en utilisant les valeurs des periodes donnees par HOLLANDER, PERLMAN et SEABORG dans Rev. mod. Phys., 1953, 25 numero 2. On y trouve en outre, pour chaque nuclide, les caracteristiques suivantes: Z, A, modes de desintegration. (auteur)

Global Reference Tables Services Architecture

Data.gov (United States)

Social Security Administration — This database stores the reference and transactional data used to provide a data-driven service access method to certain Global Reference Table (GRT) service tables.

Generalization of Vaidya's radiation metric

Energy Technology Data Exchange (ETDEWEB)

Gleiser, R J; Kozameh, C N [Universidad Nacional de Cordoba (Argentina). Instituto de Matematica, Astronomia y Fisica

1981-11-01

In this paper it is shown that if Vaidya's radiation metric is considered from the point of view of kinetic theory in general relativity, the corresponding phase space distribution function can be generalized in a particular way. The new family of spherically symmetric radiation metrics obtained contains Vaidya's as a limiting situation. The Einstein field equations are solved in a ''comoving'' coordinate system. Two arbitrary functions of a single variable are introduced in the process of solving these equations. Particular examples considered are a stationary solution, a nonvacuum solution depending on a single parameter, and several limiting situations.

Marketing communication metrics for social media

OpenAIRE

Töllinen, Aarne; Karjaluoto, Heikki

2011-01-01

The objective of this paper is to develop a conceptual framework for measuring the effectiveness of social media marketing communications. Specifically, we study whether the existing marketing communications performance metrics are still valid in the changing digitalised communications landscape, or whether it is time to rethink them, or even to devise entirely new metrics. Recent advances in information technology and marketing bring a need to re-examine measurement models. We combine two im...

Female and male life tables for seven wild primate species

Science.gov (United States)

Bronikowski, Anne M.; Cords, Marina; Alberts, Susan C.; Altmann, Jeanne; Brockman, Diane K.; Fedigan, Linda M.; Pusey, Anne; Stoinski, Tara; Strier, Karen B.; Morris, William F.

2016-01-01

We provide male and female census count data, age-specific survivorship, and female age-specific fertility estimates for populations of seven wild primates that have been continuously monitored for at least 29 years: sifaka (Propithecus verreauxi) in Madagascar; muriqui (Brachyteles hypoxanthus) in Brazil; capuchin (Cebus capucinus) in Costa Rica; baboon (Papio cynocephalus) and blue monkey (Cercopithecus mitis) in Kenya; chimpanzee (Pan troglodytes) in Tanzania; and gorilla (Gorilla beringei) in Rwanda. Using one-year age-class intervals, we computed point estimates of age-specific survival for both sexes. In all species, our survival estimates for the dispersing sex are affected by heavy censoring. We also calculated reproductive value, life expectancy, and mortality hazards for females. We used bootstrapping to place confidence intervals on life-table summary metrics (R0, the net reproductive rate; λ, the population growth rate; and G, the generation time). These data have high potential for reuse; they derive from continuous population monitoring of long-lived organisms and will be invaluable for addressing questions about comparative demography, primate conservation and human evolution. PMID:26928014

Accuracy and precision in the calculation of phenology metrics

DEFF Research Database (Denmark)

Ferreira, Ana Sofia; Visser, Andre; MacKenzie, Brian

2014-01-01

a phenology metric is first determined from a noise- and gap-free time series, and again once it has been modified. We show that precision is a greater concern than accuracy for many of these metrics, an important point that has been hereto overlooked in the literature. The variability in precision between...... phenology metrics is substantial, but it can be improved by the use of preprocessing techniques (e.g., gap-filling or smoothing). Furthermore, there are important differences in the inherent variability of the metrics that may be crucial in the interpretation of studies based upon them. Of the considered......Phytoplankton phenology (the timing of seasonal events) is a commonly used indicator for evaluating responses of marine ecosystems to climate change. However, phenological metrics are vulnerable to observation-(bloom amplitude, missing data, and observational noise) and analysis-related (temporal...

Quantum anomalies for generalized Euclidean Taub-NUT metrics

International Nuclear Information System (INIS)

Cotaescu, Ion I; Moroianu, Sergiu; Visinescu, Mihai

2005-01-01

The generalized Taub-NUT metrics exhibit in general gravitational anomalies. This is in contrast with the fact that the original Taub-NUT metric does not exhibit gravitational anomalies, which is a consequence of the fact that it admits Killing-Yano tensors forming Staeckel-Killing tensors as products. We have found that for axial anomalies, interpreted as the index of the Dirac operator, the presence of Killing-Yano tensors is irrelevant. In order to evaluate the axial anomalies, we compute the index of the Dirac operator with the APS boundary condition on balls and on annular domains. The result is an explicit number-theoretic quantity depending on the radii of the domain. This quantity is 0 for metrics close to the original Taub-NUT metric but it does not vanish in general

Metrics for Performance Evaluation of Patient Exercises during Physical Therapy.

Science.gov (United States)

Vakanski, Aleksandar; Ferguson, Jake M; Lee, Stephen

2017-06-01

The article proposes a set of metrics for evaluation of patient performance in physical therapy exercises. Taxonomy is employed that classifies the metrics into quantitative and qualitative categories, based on the level of abstraction of the captured motion sequences. Further, the quantitative metrics are classified into model-less and model-based metrics, in reference to whether the evaluation employs the raw measurements of patient performed motions, or whether the evaluation is based on a mathematical model of the motions. The reviewed metrics include root-mean square distance, Kullback Leibler divergence, log-likelihood, heuristic consistency, Fugl-Meyer Assessment, and similar. The metrics are evaluated for a set of five human motions captured with a Kinect sensor. The metrics can potentially be integrated into a system that employs machine learning for modelling and assessment of the consistency of patient performance in home-based therapy setting. Automated performance evaluation can overcome the inherent subjectivity in human performed therapy assessment, and it can increase the adherence to prescribed therapy plans, and reduce healthcare costs.

From the Mendeleev periodic table to particle physics and back to the periodic table

International Nuclear Information System (INIS)

Kibler, Maurice R.

2006-11-01

We briefly describe in this paper the passage from Mendeleev's chemistry (1869) to atomic physics (in the 1900's), nuclear physics (in the 1932's) and particle physics (from 1953 to 2006). We show how the consideration of symmetries, largely used in physics since the end of the 1920's, gave rise to a new format of the periodic table in the 1970's. More specifically, this paper is concerned with the application of the group SO(4,2)xSU(2) to the periodic table of chemical elements. It is shown how the Madelung rule of the atomic shell model can be used for setting up a periodic table that can be further rationalized via the group SO(4,2)xSU(2) and some of its subgroups. Qualitative results are obtained from this nonstandard table. (author)

Self-benchmarking Guide for Laboratory Buildings: Metrics, Benchmarks, Actions

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul; Greenberg, Steve; Sartor, Dale

2009-07-13

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in laboratory buildings. This guide is primarily intended for personnel who have responsibility for managing energy use in existing laboratory facilities - including facilities managers, energy managers, and their engineering consultants. Additionally, laboratory planners and designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior research supported by the national Laboratories for the 21st Century (Labs21) program, supported by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Much of the benchmarking data are drawn from the Labs21 benchmarking database and technical guides. Additional benchmark data were obtained from engineering experts including laboratory designers and energy managers.

Technical challenges in support of the plutonium materials conversion program in Russia

International Nuclear Information System (INIS)

Mason, C.F.V.; Zygmunt, S.J.; Hahn, W.K.; James, C.A.; Costa, D.A.; Smith, W.H.; Yarbro, S.L.

2000-01-01

The Department of Energy's Plutonium Materials Conversion Program for Russia is designed to assist Russia in defining a path for the destruction of weapons grade plutonium. A similar program is currently defining a program for destruction of US weapons grade plutonium. These two sister programs arose from the September 1998 meeting between President Yeltsin and President Clinton, after which they issued a 'Joint statement of principles for management and disposition of plutonium designated as no longer required for defense purposes'. The US and Russia have each committed to convert 50 metric tons of plutonium from nuclear weapons programs to forms which are unusable for weapons

NNDSS - Table II. Ehrlichiosis/Anaplasmosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Ehrlichiosis/Anaplasmosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

NNDSS - Table II. Ehrlichiosis/Anaplasmosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Ehrlichiosis/Anaplasmosis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the preceding...

Massless and massive quanta resulting from a mediumlike metric tensor

International Nuclear Information System (INIS)

Soln, J.

1985-01-01

A simple model of the ''primordial'' scalar field theory is presented in which the metric tensor is a generalization of the metric tensor from electrodynamics in a medium. The radiation signal corresponding to the scalar field propagates with a velocity that is generally less than c. This signal can be associated simultaneously with imaginary and real effective (momentum-dependent) masses. The requirement that the imaginary effective mass vanishes, which we take to be the prerequisite for the vacuumlike signal propagation, leads to the ''spontaneous'' splitting of the metric tensor into two distinct metric tensors: one metric tensor gives rise to masslesslike radiation and the other to a massive particle. (author)

The Living Periodic Table

Science.gov (United States)

Nahlik, Mary Schrodt

2005-01-01

To help make the abstract world of chemistry more concrete eighth-grade students, the author has them create a living periodic table that can be displayed in the classroom or hallway. This display includes information about the elements arranged in the traditional periodic table format, but also includes visual real-world representations of the…

A guide to phylogenetic metrics for conservation, community ecology and macroecology

Science.gov (United States)

Cadotte, Marc W.; Carvalho, Silvia B.; Davies, T. Jonathan; Ferrier, Simon; Fritz, Susanne A.; Grenyer, Rich; Helmus, Matthew R.; Jin, Lanna S.; Mooers, Arne O.; Pavoine, Sandrine; Purschke, Oliver; Redding, David W.; Rosauer, Dan F.; Winter, Marten; Mazel, Florent

2016-01-01

ABSTRACT The use of phylogenies in ecology is increasingly common and has broadened our understanding of biological diversity. Ecological sub‐disciplines, particularly conservation, community ecology and macroecology, all recognize the value of evolutionary relationships but the resulting development of phylogenetic approaches has led to a proliferation of phylogenetic diversity metrics. The use of many metrics across the sub‐disciplines hampers potential meta‐analyses, syntheses, and generalizations of existing results. Further, there is no guide for selecting the appropriate metric for a given question, and different metrics are frequently used to address similar questions. To improve the choice, application, and interpretation of phylo‐diversity metrics, we organize existing metrics by expanding on a unifying framework for phylogenetic information. Generally, questions about phylogenetic relationships within or between assemblages tend to ask three types of question: how much; how different; or how regular? We show that these questions reflect three dimensions of a phylogenetic tree: richness, divergence, and regularity. We classify 70 existing phylo‐diversity metrics based on their mathematical form within these three dimensions and identify ‘anchor’ representatives: for α‐diversity metrics these are PD (Faith's phylogenetic diversity), MPD (mean pairwise distance), and VPD (variation of pairwise distances). By analysing mathematical formulae and using simulations, we use this framework to identify metrics that mix dimensions, and we provide a guide to choosing and using the most appropriate metrics. We show that metric choice requires connecting the research question with the correct dimension of the framework and that there are logical approaches to selecting and interpreting metrics. The guide outlined herein will help researchers navigate the current jungle of indices. PMID:26785932

Climate change : transportation table

International Nuclear Information System (INIS)

Ogilvie, K.

1999-01-01

The Kyoto Protocol sets greenhouse gas (GHG) reduction targets for the post-2000 period. If ratified, Canada will be committed to reduce emissions of GHGs by 6 per cent below 1990 levels during the period 2008-2012. A recommended national strategy is to establish 'issue tables' that will advise the Ministers of Energy and Environment on preferred options to reach the Kyoto target and to identify early actions that can be taken. The 'Transportation Table' which is the focus of this paper, is one of the 15 sectoral tables. The Transportation Table will identify by July 1999, specific measures to mitigate GHG emissions from Canada's transportation sector. Currently, GHG emissions from the transportation sector are predicted to be 27 per cent above 1990 levels by 2010. Fuel taxes, emissions trading, and research into improved vehicle technologies and automotive fuels are some of the recommended options which can help reduce emissions trading from the transportation sector. Studies are underway to deal with emissions from transport in two sub-groups, freight and passenger. 1 fig

Assessing Software Quality Through Visualised Cohesion Metrics

Directory of Open Access Journals (Sweden)

Timothy Shih

2001-05-01

Full Text Available Cohesion is one of the most important factors for software quality as well as maintainability, reliability and reusability. Module cohesion is defined as a quality attribute that seeks for measuring the singleness of the purpose of a module. The module of poor quality can be a serious obstacle to the system quality. In order to design a good software quality, software managers and engineers need to introduce cohesion metrics to measure and produce desirable software. A highly cohesion software is thought to be a desirable constructing. In this paper, we propose a function-oriented cohesion metrics based on the analysis of live variables, live span and the visualization of processing element dependency graph. We give six typical cohesion examples to be measured as our experiments and justification. Therefore, a well-defined, well-normalized, well-visualized and well-experimented cohesion metrics is proposed to indicate and thus enhance software cohesion strength. Furthermore, this cohesion metrics can be easily incorporated with software CASE tool to help software engineers to improve software quality.

MESUR: USAGE-BASED METRICS OF SCHOLARLY IMPACT

Energy Technology Data Exchange (ETDEWEB)

BOLLEN, JOHAN [Los Alamos National Laboratory; RODRIGUEZ, MARKO A. [Los Alamos National Laboratory; VAN DE SOMPEL, HERBERT [Los Alamos National Laboratory

2007-01-30

The evaluation of scholarly communication items is now largely a matter of expert opinion or metrics derived from citation data. Both approaches can fail to take into account the myriad of factors that shape scholarly impact. Usage data has emerged as a promising complement to existing methods o fassessment but the formal groundwork to reliably and validly apply usage-based metrics of schlolarly impact is lacking. The Andrew W. Mellon Foundation funded MESUR project constitutes a systematic effort to define, validate and cross-validate a range of usage-based metrics of schlolarly impact by creating a semantic model of the scholarly communication process. The constructed model will serve as the basis of a creating a large-scale semantic network that seamlessly relates citation, bibliographic and usage data from a variety of sources. A subsequent program that uses the established semantic network as a reference data set will determine the characteristics and semantics of a variety of usage-based metrics of schlolarly impact. This paper outlines the architecture and methodology adopted by the MESUR project and its future direction.

Table Tennis Club

CERN Document Server

Table Tennis Club

2012-01-01

2012 CERN Table Tennis Tournament As the campaign launched by the CERN medical service “Move! & Eat better” is designed in particular to encourage people at CERN to take more regular exercise, the CERN Table Tennis Club, with its traditional CERN Table Tennis Tournament is providing an excellent opportunity to practice moving. The tournament will take place at the Meyrin CTT, 2 rue de Livron, Saturday August 25, 2012, in the afternoon (starting at 13:30). It is open to all CERN staff, users, visitors and families, including of course summer students, who are strongly encouraged to participate. In order to register, simply send an E-mail to Jean-Pierre Revol (jean-pierre.revol@cern.ch). You may also find useful information on the Club Web page http://www.cern.ch/tabletennis CERN 2011 champion Savitha Flaecher, between the finalist Bertrand Mouches on her left, the winner of the consolation draw on her right (Sudarshan Paramesvaran), and far left, Denis Moriaud (semi-finalist a...

X-ray table

International Nuclear Information System (INIS)

Craig, J.R.; Otto, G.W.

1980-01-01

An X-ray radiographic or fluoroscopic table is described which includes a film holder with a frame attached to a cable running over end pulleys for positioning the holder longitudinally as desired under the table top. The holder has a front opening to receive a cassette-supporting tray which can be slid out on tracks to change the cassette. A reed switch on the frame is opened by a permanent magnet on the tray only when the tray is half-way out. When the switch is closed, an electromagnet locks the pulley and the holder in place. The holder is thus automatically locked in place not only during exposure (tray in) but when the tray is out for changing the cassette. To re-position the holder, the operator pulls the tray half-out and, using the tray itself, pushes the holder along the table, the holder being counterbalanced by a weight. (author)

Classroom reconstruction of the Schwarzschild metric

OpenAIRE

Kassner, Klaus

2015-01-01

A promising way to introduce general relativity in the classroom is to study the physical implications of certain given metrics, such as the Schwarzschild one. This involves lower mathematical expenditure than an approach focusing on differential geometry in its full glory and permits to emphasize physical aspects before attacking the field equations. Even so, in terms of motivation, lacking justification of the metric employed may pose an obstacle. The paper discusses how to establish the we...

Area Regge calculus and discontinuous metrics

International Nuclear Information System (INIS)

Wainwright, Chris; Williams, Ruth M

2004-01-01

Taking the triangle areas as independent variables in the theory of Regge calculus can lead to ambiguities in the edge lengths, which can be interpreted as discontinuities in the metric. We construct solutions to area Regge calculus using a triangulated lattice and find that on a spacelike or timelike hypersurface no such discontinuity can arise. On a null hypersurface however, we can have such a situation and the resulting metric can be interpreted as a so-called refractive wave

Use of metrics in an effective ALARA program

International Nuclear Information System (INIS)

Bates, B.B. Jr.

1996-01-01

ALARA radiological protection programs require metrics to meet their objectives. Sources of metrics include external dosimetry; internal dosimetry; radiological occurrences from the occurrence reporting an processing system (ORPS); and radiological incident reports (RIR). The sources themselves contain an abundance of specific open-quotes indicators.close quotes To choose the site-specific indicators that will be tracked and trended requires careful review. Justification is needed to defend the indicators selected and maybe even stronger justification is needed for those indicators that are available, but not chosen as a metric. Historically, the many different sources of information resided in a plethora of locations. Even the same type of metric had data located in different areas and could not be easily totaled for the entire Site. This required the end user to expend valuable time and effort to locate the data they needed. To address this problem, a central metrics database has been developed so that a customer can have all their questions addressed quickly and correctly. The database was developed in the beginning to answer some of the customer's most frequently asked questions. IL is now also a tool to communicate the status of the radiation protection program to facility managers. Finally, it also addresses requirements contained in the Rad Con manual and the 10CFR835 implementation guides. The database uses currently available, open-quotes user friendly,close quotes software and contains information from RIR's, ORPS, and external dosimetry records specific to ALARA performance indicators. The database is expandable to allow new metrics input. Specific reports have been developed to assist customers in their tracking and trending of ALARA metrics. These include quarterly performance indicator reports, monthly radiological incident reports, monthly external dose history and goals tracking reports, and the future use of performance indexing

Assessment of six dissimilarity metrics for climate analogues

Science.gov (United States)

Grenier, Patrick; Parent, Annie-Claude; Huard, David; Anctil, François; Chaumont, Diane

2013-04-01

Spatial analogue techniques consist in identifying locations whose recent-past climate is similar in some aspects to the future climate anticipated at a reference location. When identifying analogues, one key step is the quantification of the dissimilarity between two climates separated in time and space, which involves the choice of a metric. In this communication, spatial analogues and their usefulness are briefly discussed. Next, six metrics are presented (the standardized Euclidean distance, the Kolmogorov-Smirnov statistic, the nearest-neighbor distance, the Zech-Aslan energy statistic, the Friedman-Rafsky runs statistic and the Kullback-Leibler divergence), along with a set of criteria used for their assessment. The related case study involves the use of numerical simulations performed with the Canadian Regional Climate Model (CRCM-v4.2.3), from which three annual indicators (total precipitation, heating degree-days and cooling degree-days) are calculated over 30-year periods (1971-2000 and 2041-2070). Results indicate that the six metrics identify comparable analogue regions at a relatively large scale, but best analogues may differ substantially. For best analogues, it is also shown that the uncertainty stemming from the metric choice does generally not exceed that stemming from the simulation or model choice. A synthesis of the advantages and drawbacks of each metric is finally presented, in which the Zech-Aslan energy statistic stands out as the most recommended metric for analogue studies, whereas the Friedman-Rafsky runs statistic is the least recommended, based on this case study.

Comprehensive Metric Education Project: Implementing Metrics at a District Level Administrative Guide.

Science.gov (United States)

Borelli, Michael L.

This document details the administrative issues associated with guiding a school district through its metrication efforts. Issues regarding staff development, curriculum development, and the acquisition of instructional resources are considered. Alternative solutions are offered. Finally, an overall implementation strategy is discussed with…

Effective use of metrics in an ALARA program

International Nuclear Information System (INIS)

Bates, B.B. Jr.

1996-01-01

ALARA radiological protection programs require metrics to meet their objectives. Sources of metrics include; external dosimetry; internal dosimetry; radiological occurrences from the occurrence reporting and processing system (ORPS); and radiological incident reports (RIR). The sources themselves contain an abundance of specific ''indicators''. To choose the site-specific indicators that will be tracked and trended requires careful review. This required the end users to expend valuable time and effort to locate the data they needed. To address this problem, a central metrics database has been developed so that customers can have all their questions addressed quickly and correctly. The database was developed in the beginning to answer some of the customer's most frequently asked questions. It is now also a tool to communicate the status of the radiation protection program to facility managers. Finally it also addresses requirements contained in the Rad Con manual and the 10CFR835 implementation guides. The database uses currently available, ''user friendly'', software and contains information from RIR's, ORPS, and external dosimetry records specific to ALARA performance indicators. The database is expandable to allow new metrics input. Specific reports have been developed to assist customers in their tracking and trending of ALARA metrics

21 CFR 890.3750 - Mechanical table.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mechanical table. 890.3750 Section 890.3750 Food... DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Prosthetic Devices § 890.3750 Mechanical table. (a) Identification. A mechanical table is a device intended for medical purposes that has a flat surface that can be...

A family of metric gravities

Science.gov (United States)

Shuler, Robert

2018-04-01

The goal of this paper is to take a completely fresh approach to metric gravity, in which the metric principle is strictly adhered to but its properties in local space-time are derived from conservation principles, not inferred from a global field equation. The global field strength variation then gains some flexibility, but only in the regime of very strong fields (2nd-order terms) whose measurement is now being contemplated. So doing provides a family of similar gravities, differing only in strong fields, which could be developed into meaningful verification targets for strong fields after the manner in which far-field variations were used in the 20th century. General Relativity (GR) is shown to be a member of the family and this is demonstrated by deriving the Schwarzschild metric exactly from a suitable field strength assumption. The method of doing so is interesting in itself because it involves only one differential equation rather than the usual four. Exact static symmetric field solutions are also given for one pedagogical alternative based on potential, and one theoretical alternative based on inertia, and the prospects of experimentally differentiating these are analyzed. Whether the method overturns the conventional wisdom that GR is the only metric theory of gravity and that alternatives must introduce additional interactions and fields is somewhat semantical, depending on whether one views the field strength assumption as a field and whether the assumption that produces GR is considered unique in some way. It is of course possible to have other fields, and the local space-time principle can be applied to field gravities which usually are weak-field approximations having only time dilation, giving them the spatial factor and promoting them to full metric theories. Though usually pedagogical, some of them are interesting from a quantum gravity perspective. Cases are noted where mass measurement errors, or distributions of dark matter, can cause one

Automation of BESSY scanning tables

International Nuclear Information System (INIS)

Hanton, J.; Kesteman, J.

1981-01-01

A micro processor M6800 is used for the automation of scanning and premeasuring BESSY tables. The tasks achieved by the micro processor are: 1. control of spooling of the four asynchronous film winding devices and switching on and off the 4 projections lamps, 2. pre-processing of the data coming from a bi-polar coordinates measuring device, 3. bi-directional interchange of informations between the operator, the BESSY table and the DEC PDP 11/34 mini computer controling the scanning operations, 4. control of the magnification on the table by swapping the projection lenses of appropriate focal lengths and the associated light boxes (under development). In connection with point 4, study is being made for the use of BESSY tables for accurate measurements (+/-5 microns), by encoding the displacements of the projections lenses. (orig.)

Metrication manual

International Nuclear Information System (INIS)

Harper, A.F.A.; Digby, R.B.; Thong, S.P.; Lacey, F.

1978-04-01

In April 1978 a meeting of senior metrication officers convened by the Commonwealth Science Council of the Commonwealth Secretariat, was held in London. The participants were drawn from Australia, Bangladesh, Britain, Canada, Ghana, Guyana, India, Jamaica, Papua New Guinea, Solomon Islands and Trinidad and Tobago. Among other things, the meeting resolved to develop a set of guidelines to assist countries to change to SI and to compile such guidelines in the form of a working manual

From the Mendeleev periodic table to particle physics and back to the periodic table

Energy Technology Data Exchange (ETDEWEB)

Kibler, Maurice R. [Universite de Lyon, Institut de Physique Nucleaire, Universite Lyon 1 and CNRS/IN2P3, 43 Bd du 11 Novembre 1918, F-69622 Villeurbanne Cedex (France)

2006-11-15

We briefly describe in this paper the passage from Mendeleev's chemistry (1869) to atomic physics (in the 1900's), nuclear physics (in the 1932's) and particle physics (from 1953 to 2006). We show how the consideration of symmetries, largely used in physics since the end of the 1920's, gave rise to a new format of the periodic table in the 1970's. More specifically, this paper is concerned with the application of the group SO(4,2)xSU(2) to the periodic table of chemical elements. It is shown how the Madelung rule of the atomic shell model can be used for setting up a periodic table that can be further rationalized via the group SO(4,2)xSU(2) and some of its subgroups. Qualitative results are obtained from this nonstandard table. (author)

An accurate metric for the spacetime around rotating neutron stars

Science.gov (United States)

Pappas, George

2017-04-01

The problem of having an accurate description of the spacetime around rotating neutron stars is of great astrophysical interest. For astrophysical applications, one needs to have a metric that captures all the properties of the spacetime around a rotating neutron star. Furthermore, an accurate appropriately parametrized metric, I.e. a metric that is given in terms of parameters that are directly related to the physical structure of the neutron star, could be used to solve the inverse problem, which is to infer the properties of the structure of a neutron star from astrophysical observations. In this work, we present such an approximate stationary and axisymmetric metric for the exterior of rotating neutron stars, which is constructed using the Ernst formalism and is parametrized by the relativistic multipole moments of the central object. This metric is given in terms of an expansion on the Weyl-Papapetrou coordinates with the multipole moments as free parameters and is shown to be extremely accurate in capturing the physical properties of a neutron star spacetime as they are calculated numerically in general relativity. Because the metric is given in terms of an expansion, the expressions are much simpler and easier to implement, in contrast to previous approaches. For the parametrization of the metric in general relativity, the recently discovered universal 3-hair relations are used to produce a three-parameter metric. Finally, a straightforward extension of this metric is given for scalar-tensor theories with a massless scalar field, which also admit a formulation in terms of an Ernst potential.

Metric reconstruction from Weyl scalars

Energy Technology Data Exchange (ETDEWEB)

Whiting, Bernard F; Price, Larry R [Department of Physics, PO Box 118440, University of Florida, Gainesville, FL 32611 (United States)

2005-08-07

The Kerr geometry has remained an elusive world in which to explore physics and delve into the more esoteric implications of general relativity. Following the discovery, by Kerr in 1963, of the metric for a rotating black hole, the most major advance has been an understanding of its Weyl curvature perturbations based on Teukolsky's discovery of separable wave equations some ten years later. In the current research climate, where experiments across the globe are preparing for the first detection of gravitational waves, a more complete understanding than concerns just the Weyl curvature is now called for. To understand precisely how comparatively small masses move in response to the gravitational waves they emit, a formalism has been developed based on a description of the whole spacetime metric perturbation in the neighbourhood of the emission region. Presently, such a description is not available for the Kerr geometry. While there does exist a prescription for obtaining metric perturbations once curvature perturbations are known, it has become apparent that there are gaps in that formalism which are still waiting to be filled. The most serious gaps include gauge inflexibility, the inability to include sources-which are essential when the emitting masses are considered-and the failure to describe the l = 0 and 1 perturbation properties. Among these latter properties of the perturbed spacetime, arising from a point mass in orbit, are the perturbed mass and axial component of angular momentum, as well as the very elusive Carter constant for non-axial angular momentum. A status report is given on recent work which begins to repair these deficiencies in our current incomplete description of Kerr metric perturbations.

Metric reconstruction from Weyl scalars

International Nuclear Information System (INIS)

Whiting, Bernard F; Price, Larry R

2005-01-01

The Kerr geometry has remained an elusive world in which to explore physics and delve into the more esoteric implications of general relativity. Following the discovery, by Kerr in 1963, of the metric for a rotating black hole, the most major advance has been an understanding of its Weyl curvature perturbations based on Teukolsky's discovery of separable wave equations some ten years later. In the current research climate, where experiments across the globe are preparing for the first detection of gravitational waves, a more complete understanding than concerns just the Weyl curvature is now called for. To understand precisely how comparatively small masses move in response to the gravitational waves they emit, a formalism has been developed based on a description of the whole spacetime metric perturbation in the neighbourhood of the emission region. Presently, such a description is not available for the Kerr geometry. While there does exist a prescription for obtaining metric perturbations once curvature perturbations are known, it has become apparent that there are gaps in that formalism which are still waiting to be filled. The most serious gaps include gauge inflexibility, the inability to include sources-which are essential when the emitting masses are considered-and the failure to describe the l = 0 and 1 perturbation properties. Among these latter properties of the perturbed spacetime, arising from a point mass in orbit, are the perturbed mass and axial component of angular momentum, as well as the very elusive Carter constant for non-axial angular momentum. A status report is given on recent work which begins to repair these deficiencies in our current incomplete description of Kerr metric perturbations

Using Publication Metrics to Highlight Academic Productivity and Research Impact

Science.gov (United States)

Carpenter, Christopher R.; Cone, David C.; Sarli, Cathy C.

2016-01-01

This article provides a broad overview of widely available measures of academic productivity and impact using publication data and highlights uses of these metrics for various purposes. Metrics based on publication data include measures such as number of publications, number of citations, the journal impact factor score, and the h-index, as well as emerging metrics based on document-level metrics. Publication metrics can be used for a variety of purposes for tenure and promotion, grant applications and renewal reports, benchmarking, recruiting efforts, and administrative purposes for departmental or university performance reports. The authors also highlight practical applications of measuring and reporting academic productivity and impact to emphasize and promote individual investigators, grant applications, or department output. PMID:25308141

Cohort Working Life Tables for Older Canadians

Directory of Open Access Journals (Sweden)

Spencer, Byron G.

2010-01-01

Full Text Available AbstractWe construct cohort working life tables for Canadian men and women aged 50and older and, for comparison, corresponding period tables. The tables arederived using annual single-age time series of participation rates for 1976-2006from the master files of the Statistics Canada Labour Force Survey. The cohortcalculations are based on stochastic projections of mortality coupled withalternative assumptions about future participation rates. Separate tables areprovided for the years 1976, 1991, and 2006, thus spanning a period ofsubstantial gains in life expectancy and strong upward trends in femaleparticipation. Life expectancies based on the cohort tables are greater thanthose based on the period tables, for both men and women, and that is reflectedin increased retirement expectancies. For example, a male aged 50 in 1976could have expected to live three years longer and to have almost four moreyears in retirement, based on the male cohort table under medium assumptions,as compared with the corresponding period table.RésuméNous avons établis des tables de vie active par génération pour les Canadiens etCanadiennes âgés de 50 ans ou plus ainsi que des tables du momentcorrespondantes pour servir de comparaison. Les tables sont dérivées à l'aidede séries chronologiques annuelles d'un seul âge pour le taux d'activité pour lesannées 1976 à 2006 provenant des fichiers maîtres de l'Enquête sur lapopulation active de Statistique Canada. Les calculs par génération sont baséessur des projections stochastiques de mortalité et sur des suppositions quant àde futurs taux d'activité possibles. Des tables séparées ont été établies pour lesannées 1976, 1991 et 2006 ; ce qui représente une période qui a vu des gainssubstantiels en ce qui concerne l'espérance de vie et une forte hausse d'activitéchez les femmes. Les espérance de vie basées sur les tables par génération sontplus élevées que celles basées sur les tables du

Comparison of routing metrics for wireless mesh networks

CSIR Research Space (South Africa)

Nxumalo, SL

2011-09-01

Full Text Available in each and every relay node so as to find the next hop for the packet. A routing metric is simply a measure used for selecting the best path, used by a routing protocol. Figure 2 shows the relationship between a routing protocol and the routing... on its QoS-awareness level. The routing metrics that considered QoS the most were selected from each group. This section discusses the four routing metrics that were compared in this paper, which are: hop count (HOP), expected transmission count (ETX...

The metrics and correlates of physician migration from Africa

Directory of Open Access Journals (Sweden)

Arah Onyebuchi A

2007-05-01

Full Text Available Abstract Background Physician migration from poor to rich countries is considered an important contributor to the growing health workforce crisis in the developing world. This is particularly true for Africa. The perceived magnitude of such migration for each source country might, however, depend on the choice of metrics used in the analysis. This study examined the influence of choice of migration metrics on the rankings of African countries that suffered the most physician migration, and investigated the correlates of physician migration. Methods Ranking and correlational analyses were conducted on African physician migration data adjusted for bilateral net flows, and supplemented with developmental, economic and health system data. The setting was the 53 African birth countries of African-born physicians working in nine wealthier destination countries. Three metrics of physician migration were used: total number of physician émigrés; emigration fraction defined as the proportion of the potential physician pool working in destination countries; and physician migration density defined as the number of physician émigrés per 1000 population of the African source country. Results Rankings based on any of the migration metrics differed substantially from those based on the other two metrics. Although the emigration fraction and physician migration density metrics gave proportionality to the migration crisis, only the latter was consistently associated with source countries' workforce capacity, health, health spending, economic and development characteristics. As such, higher physician migration density was seen among African countries with relatively higher health workforce capacity (0.401 ≤ r ≤ 0.694, p ≤ 0.011, health status, health spending, and development. Conclusion The perceived magnitude of physician migration is sensitive to the choice of metrics. Complementing the emigration fraction, the physician migration density is a metric

Guide to mathematical tables supplement no 1

CERN Document Server

Burunova, N M; Fedorova, R M

1960-01-01

A Guide to Mathematical Tables is a supplement to the Guide to Mathematical Tables published by the U.S.S.R. Academy of Sciences in 1956. The tables contain information on subjects such as powers, rational and algebraic functions, and trigonometric functions, as well as logarithms and polynomials and Legendre functions. An index listing all functions included in both the Guide and the Supplement is included.Comprised of 15 chapters, this supplement first describes mathematical tables in the following order: the accuracy of the table (that is, the number of decimal places or significant

Description of the Sandia National Laboratories science, technology & engineering metrics process.

Energy Technology Data Exchange (ETDEWEB)

Jordan, Gretchen B.; Watkins, Randall D.; Trucano, Timothy Guy; Burns, Alan Richard; Oelschlaeger, Peter

2010-04-01

There has been a concerted effort since 2007 to establish a dashboard of metrics for the Science, Technology, and Engineering (ST&E) work at Sandia National Laboratories. These metrics are to provide a self assessment mechanism for the ST&E Strategic Management Unit (SMU) to complement external expert review and advice and various internal self assessment processes. The data and analysis will help ST&E Managers plan, implement, and track strategies and work in order to support the critical success factors of nurturing core science and enabling laboratory missions. The purpose of this SAND report is to provide a guide for those who want to understand the ST&E SMU metrics process. This report provides an overview of why the ST&E SMU wants a dashboard of metrics, some background on metrics for ST&E programs from existing literature and past Sandia metrics efforts, a summary of work completed to date, specifics on the portfolio of metrics that have been chosen and the implementation process that has been followed, and plans for the coming year to improve the ST&E SMU metrics process.

Relevance of motion-related assessment metrics in laparoscopic surgery.

Science.gov (United States)

Oropesa, Ignacio; Chmarra, Magdalena K; Sánchez-González, Patricia; Lamata, Pablo; Rodrigues, Sharon P; Enciso, Silvia; Sánchez-Margallo, Francisco M; Jansen, Frank-Willem; Dankelman, Jenny; Gómez, Enrique J

2013-06-01

Motion metrics have become an important source of information when addressing the assessment of surgical expertise. However, their direct relationship with the different surgical skills has not been fully explored. The purpose of this study is to investigate the relevance of motion-related metrics in the evaluation processes of basic psychomotor laparoscopic skills and their correlation with the different abilities sought to measure. A framework for task definition and metric analysis is proposed. An explorative survey was first conducted with a board of experts to identify metrics to assess basic psychomotor skills. Based on the output of that survey, 3 novel tasks for surgical assessment were designed. Face and construct validation was performed, with focus on motion-related metrics. Tasks were performed by 42 participants (16 novices, 22 residents, and 4 experts). Movements of the laparoscopic instruments were registered with the TrEndo tracking system and analyzed. Time, path length, and depth showed construct validity for all 3 tasks. Motion smoothness and idle time also showed validity for tasks involving bimanual coordination and tasks requiring a more tactical approach, respectively. Additionally, motion smoothness and average speed showed a high internal consistency, proving them to be the most task-independent of all the metrics analyzed. Motion metrics are complementary and valid for assessing basic psychomotor skills, and their relevance depends on the skill being evaluated. A larger clinical implementation, combined with quality performance information, will give more insight on the relevance of the results shown in this study.

Constructing stage-structured matrix population models from life tables: comparison of methods

Directory of Open Access Journals (Sweden)

Masami Fujiwara

2017-10-01

Full Text Available A matrix population model is a convenient tool for summarizing per capita survival and reproduction rates (collectively vital rates of a population and can be used for calculating an asymptotic finite population growth rate (λ and generation time. These two pieces of information can be used for determining the status of a threatened species. The use of stage-structured population models has increased in recent years, and the vital rates in such models are often estimated using a life table analysis. However, potential bias introduced when converting age-structured vital rates estimated from a life table into parameters for a stage-structured population model has not been assessed comprehensively. The objective of this study was to investigate the performance of methods for such conversions using simulated life histories of organisms. The underlying models incorporate various types of life history and true population growth rates of varying levels. The performance was measured by comparing differences in λ and the generation time calculated using the Euler-Lotka equation, age-structured population matrices, and several stage-structured population matrices that were obtained by applying different conversion methods. The results show that the discretization of age introduces only small bias in λ or generation time. Similarly, assuming a fixed age of maturation at the mean age of maturation does not introduce much bias. However, aggregating age-specific survival rates into a stage-specific survival rate and estimating a stage-transition rate can introduce substantial bias depending on the organism’s life history type and the true values of λ. In order to aggregate survival rates, the use of the weighted arithmetic mean was the most robust method for estimating λ. Here, the weights are given by survivorship curve after discounting with λ. To estimate a stage-transition rate, matching the proportion of individuals transitioning, with λ used

Left-invariant Einstein metrics on S3 ×S3

Science.gov (United States)

Belgun, Florin; Cortés, Vicente; Haupt, Alexander S.; Lindemann, David

2018-06-01

The classification of homogeneous compact Einstein manifolds in dimension six is an open problem. We consider the remaining open case, namely left-invariant Einstein metrics g on G = SU(2) × SU(2) =S3 ×S3. Einstein metrics are critical points of the total scalar curvature functional for fixed volume. The scalar curvature S of a left-invariant metric g is constant and can be expressed as a rational function in the parameters determining the metric. The critical points of S, subject to the volume constraint, are given by the zero locus of a system of polynomials in the parameters. In general, however, the determination of the zero locus is apparently out of reach. Instead, we consider the case where the isotropy group K of g in the group of motions is non-trivial. When K ≇Z2 we prove that the Einstein metrics on G are given by (up to homothety) either the standard metric or the nearly Kähler metric, based on representation-theoretic arguments and computer algebra. For the remaining case K ≅Z2 we present partial results.

Authenticated hash tables

DEFF Research Database (Denmark)

Triandopoulos, Nikolaos; Papamanthou, Charalampos; Tamassia, Roberto

2008-01-01

Hash tables are fundamental data structures that optimally answer membership queries. Suppose a client stores n elements in a hash table that is outsourced at a remote server so that the client can save space or achieve load balancing. Authenticating the hash table functionality, i.e., verifying...... to a scheme that achieves different trade-offs---namely, constant update time and O(nε/logκε n) query time for fixed ε > 0 and κ > 0. An experimental evaluation of our solution shows very good scalability....

Active Metric Learning from Relative Comparisons

OpenAIRE

Xiong, Sicheng; Rosales, Rómer; Pei, Yuanli; Fern, Xiaoli Z.

2014-01-01

This work focuses on active learning of distance metrics from relative comparison information. A relative comparison specifies, for a data point triplet $(x_i,x_j,x_k)$, that instance $x_i$ is more similar to $x_j$ than to $x_k$. Such constraints, when available, have been shown to be useful toward defining appropriate distance metrics. In real-world applications, acquiring constraints often require considerable human effort. This motivates us to study how to select and query the most useful ...

A practical approach to determine dose metrics for nanomaterials.

Science.gov (United States)

Delmaar, Christiaan J E; Peijnenburg, Willie J G M; Oomen, Agnes G; Chen, Jingwen; de Jong, Wim H; Sips, Adriënne J A M; Wang, Zhuang; Park, Margriet V D Z

2015-05-01

Traditionally, administered mass is used to describe doses of conventional chemical substances in toxicity studies. For deriving toxic doses of nanomaterials, mass and chemical composition alone may not adequately describe the dose, because particles with the same chemical composition can have completely different toxic mass doses depending on properties such as particle size. Other dose metrics such as particle number, volume, or surface area have been suggested, but consensus is lacking. The discussion regarding the most adequate dose metric for nanomaterials clearly needs a systematic, unbiased approach to determine the most appropriate dose metric for nanomaterials. In the present study, the authors propose such an approach and apply it to results from in vitro and in vivo experiments with silver and silica nanomaterials. The proposed approach is shown to provide a convenient tool to systematically investigate and interpret dose metrics of nanomaterials. Recommendations for study designs aimed at investigating dose metrics are provided. © 2015 SETAC.

Information-theoretic semi-supervised metric learning via entropy regularization.

Science.gov (United States)

Niu, Gang; Dai, Bo; Yamada, Makoto; Sugiyama, Masashi

2014-08-01

We propose a general information-theoretic approach to semi-supervised metric learning called SERAPH (SEmi-supervised metRic leArning Paradigm with Hypersparsity) that does not rely on the manifold assumption. Given the probability parameterized by a Mahalanobis distance, we maximize its entropy on labeled data and minimize its entropy on unlabeled data following entropy regularization. For metric learning, entropy regularization improves manifold regularization by considering the dissimilarity information of unlabeled data in the unsupervised part, and hence it allows the supervised and unsupervised parts to be integrated in a natural and meaningful way. Moreover, we regularize SERAPH by trace-norm regularization to encourage low-dimensional projections associated with the distance metric. The nonconvex optimization problem of SERAPH could be solved efficiently and stably by either a gradient projection algorithm or an EM-like iterative algorithm whose M-step is convex. Experiments demonstrate that SERAPH compares favorably with many well-known metric learning methods, and the learned Mahalanobis distance possesses high discriminability even under noisy environments.

Fisher information metrics for binary classifier evaluation and training

CERN Multimedia

CERN. Geneva

2018-01-01

Different evaluation metrics for binary classifiers are appropriate to different scientific domains and even to different problems within the same domain. This presentation focuses on the optimisation of event selection to minimise statistical errors in HEP parameter estimation, a problem that is best analysed in terms of the maximisation of Fisher information about the measured parameters. After describing a general formalism to derive evaluation metrics based on Fisher information, three more specific metrics are introduced for the measurements of signal cross sections in counting experiments (FIP1) or distribution fits (FIP2) and for the measurements of other parameters from distribution fits (FIP3). The FIP2 metric is particularly interesting because it can be derived from any ROC curve, provided that prevalence is also known. In addition to its relation to measurement errors when used as an evaluation criterion (which makes it more interesting that the ROC AUC), a further advantage of the FIP2 metric is ...

Multi-Institutional External Validation of Seminal Vesicle Invasion Nomograms: Head-to-Head Comparison of Gallina Nomogram Versus 2007 Partin Tables

International Nuclear Information System (INIS)

Zorn, Kevin C.; Capitanio, Umberto; Jeldres, Claudio; Arjane, Philippe; Perrotte, Paul; Shariat, Shahrokh F.; Lee, David I.; Shalhav, Arieh L.; Zagaja, Gregory P.; Shikanov, Sergey A.; Gofrit, Ofer N.; Thong, Alan E.; Albala, David M.; Sun, Leon; Karakiewicz, Pierre I.

2009-01-01

Purpose: The Partin tables represent one of the most widely used prostate cancer staging tools for seminal vesicle invasion (SVI) prediction. Recently, Gallina et al. reported a novel staging tool for the prediction of SVI that further incorporated the use of the percentage of positive biopsy cores. We performed an external validation of the Gallina et al. nomogram and the 2007 Partin tables in a large, multi-institutional North American cohort of men treated with robotic-assisted radical prostatectomy. Methods and Materials: Clinical and pathologic data were prospectively gathered from 2,606 patients treated with robotic-assisted radical prostatectomy at one of four North American robotic referral centers between 2002 and 2007. Discrimination was quantified with the area under the receiver operating characteristics curve. The calibration compared the predicted and observed SVI rates throughout the entire range of predictions. Results: At robotic-assisted radical prostatectomy, SVI was recorded in 4.2% of patients. The discriminant properties of the Gallina et al. nomogram resulted in 81% accuracy compared with 78% for the 2007 Partin tables. The Gallina et al. nomogram overestimated the true rate of SVI. Conversely, the Partin tables underestimated the true rate of SVI. Conclusion: The Gallina et al. nomogram offers greater accuracy (81%) than the 2007 Partin tables (78%). However, both tools are associated with calibration limitations that need to be acknowledged and considered before their implementation into clinical practice.

Metrical and dynamical aspects in complex analysis

CERN Document Server

2017-01-01

The central theme of this reference book is the metric geometry of complex analysis in several variables. Bridging a gap in the current literature, the text focuses on the fine behavior of the Kobayashi metric of complex manifolds and its relationships to dynamical systems, hyperbolicity in the sense of Gromov and operator theory, all very active areas of research. The modern points of view expressed in these notes, collected here for the first time, will be of interest to academics working in the fields of several complex variables and metric geometry. The different topics are treated coherently and include expository presentations of the relevant tools, techniques and objects, which will be particularly useful for graduate and PhD students specializing in the area.

Hybrid chromophore/template nanostructures: a customizable platform material for solar energy storage and conversion.

Science.gov (United States)

Kolpak, Alexie M; Grossman, Jeffrey C

2013-01-21

Challenges with cost, cyclability, and/or low energy density have largely prevented the development of solar thermal fuels, a potentially attractive alternative energy technology based on molecules that can capture and store solar energy as latent heat in a closed cycle. In this paper, we present a set of novel hybrid photoisomer/template solar thermal fuels that can potentially circumvent these challenges. Using first-principles computations, we demonstrate that these fuels, composed of organic photoisomers bound to inexpensive carbon-based templates, can reversibly store solar energy at densities comparable to Li-ion batteries. Furthermore, we show that variation of the template material in combination with the photoisomer can be used to optimize many of the key performance metrics of the fuel-i.e., the energy density, the storage lifetime, the temperature of the output heat, and the efficiency of the solar-to-heat conversion. Our work suggests that the solar thermal fuels concept can be translated into a practical and highly customizable energy storage and conversion technology.

Important LiDAR metrics for discriminating forest tree species in Central Europe

Science.gov (United States)

Shi, Yifang; Wang, Tiejun; Skidmore, Andrew K.; Heurich, Marco

2018-03-01

Numerous airborne LiDAR-derived metrics have been proposed for classifying tree species. Yet an in-depth ecological and biological understanding of the significance of these metrics for tree species mapping remains largely unexplored. In this paper, we evaluated the performance of 37 frequently used LiDAR metrics derived under leaf-on and leaf-off conditions, respectively, for discriminating six different tree species in a natural forest in Germany. We firstly assessed the correlation between these metrics. Then we applied a Random Forest algorithm to classify the tree species and evaluated the importance of the LiDAR metrics. Finally, we identified the most important LiDAR metrics and tested their robustness and transferability. Our results indicated that about 60% of LiDAR metrics were highly correlated to each other (|r| > 0.7). There was no statistically significant difference in tree species mapping accuracy between the use of leaf-on and leaf-off LiDAR metrics. However, combining leaf-on and leaf-off LiDAR metrics significantly increased the overall accuracy from 58.2% (leaf-on) and 62.0% (leaf-off) to 66.5% as well as the kappa coefficient from 0.47 (leaf-on) and 0.51 (leaf-off) to 0.58. Radiometric features, especially intensity related metrics, provided more consistent and significant contributions than geometric features for tree species discrimination. Specifically, the mean intensity of first-or-single returns as well as the mean value of echo width were identified as the most robust LiDAR metrics for tree species discrimination. These results indicate that metrics derived from airborne LiDAR data, especially radiometric metrics, can aid in discriminating tree species in a mixed temperate forest, and represent candidate metrics for tree species classification and monitoring in Central Europe.

Human Performance Optimization Metrics: Consensus Findings, Gaps, and Recommendations for Future Research.

Science.gov (United States)

Nindl, Bradley C; Jaffin, Dianna P; Dretsch, Michael N; Cheuvront, Samuel N; Wesensten, Nancy J; Kent, Michael L; Grunberg, Neil E; Pierce, Joseph R; Barry, Erin S; Scott, Jonathan M; Young, Andrew J; OʼConnor, Francis G; Deuster, Patricia A

2015-11-01

Human performance optimization (HPO) is defined as "the process of applying knowledge, skills and emerging technologies to improve and preserve the capabilities of military members, and organizations to execute essential tasks." The lack of consensus for operationally relevant and standardized metrics that meet joint military requirements has been identified as the single most important gap for research and application of HPO. In 2013, the Consortium for Health and Military Performance hosted a meeting to develop a toolkit of standardized HPO metrics for use in military and civilian research, and potentially for field applications by commanders, units, and organizations. Performance was considered from a holistic perspective as being influenced by various behaviors and barriers. To accomplish the goal of developing a standardized toolkit, key metrics were identified and evaluated across a spectrum of domains that contribute to HPO: physical performance, nutritional status, psychological status, cognitive performance, environmental challenges, sleep, and pain. These domains were chosen based on relevant data with regard to performance enhancers and degraders. The specific objectives at this meeting were to (a) identify and evaluate current metrics for assessing human performance within selected domains; (b) prioritize metrics within each domain to establish a human performance assessment toolkit; and (c) identify scientific gaps and the needed research to more effectively assess human performance across domains. This article provides of a summary of 150 total HPO metrics across multiple domains that can be used as a starting point-the beginning of an HPO toolkit: physical fitness (29 metrics), nutrition (24 metrics), psychological status (36 metrics), cognitive performance (35 metrics), environment (12 metrics), sleep (9 metrics), and pain (5 metrics). These metrics can be particularly valuable as the military emphasizes a renewed interest in Human Dimension efforts

Can Tweets Predict Citations? Metrics of Social Impact Based on Twitter and Correlation with Traditional Metrics of Scientific Impact

Science.gov (United States)

2011-01-01

Background Citations in peer-reviewed articles and the impact factor are generally accepted measures of scientific impact. Web 2.0 tools such as Twitter, blogs or social bookmarking tools provide the possibility to construct innovative article-level or journal-level metrics to gauge impact and influence. However, the relationship of the these new metrics to traditional metrics such as citations is not known. Objective (1) To explore the feasibility of measuring social impact of and public attention to scholarly articles by analyzing buzz in social media, (2) to explore the dynamics, content, and timing of tweets relative to the publication of a scholarly article, and (3) to explore whether these metrics are sensitive and specific enough to predict highly cited articles. Methods Between July 2008 and November 2011, all tweets containing links to articles in the Journal of Medical Internet Research (JMIR) were mined. For a subset of 1573 tweets about 55 articles published between issues 3/2009 and 2/2010, different metrics of social media impact were calculated and compared against subsequent citation data from Scopus and Google Scholar 17 to 29 months later. A heuristic to predict the top-cited articles in each issue through tweet metrics was validated. Results A total of 4208 tweets cited 286 distinct JMIR articles. The distribution of tweets over the first 30 days after article publication followed a power law (Zipf, Bradford, or Pareto distribution), with most tweets sent on the day when an article was published (1458/3318, 43.94% of all tweets in a 60-day period) or on the following day (528/3318, 15.9%), followed by a rapid decay. The Pearson correlations between tweetations and citations were moderate and statistically significant, with correlation coefficients ranging from .42 to .72 for the log-transformed Google Scholar citations, but were less clear for Scopus citations and rank correlations. A linear multivariate model with time and tweets as significant

Rainbows without unicorns: metric structures in theories with modified dispersion relations

International Nuclear Information System (INIS)

Lobo, Iarley P.; Loret, Niccolo; Nettel, Francisco

2017-01-01

Rainbow metrics are a widely used approach to the metric formalism for theories with modified dispersion relations. They have had a huge success in the quantum gravity phenomenology literature, since they allow one to introduce momentum-dependent space-time metrics into the description of systems with a modified dispersion relation. In this paper, we introduce the reader to some realizations of this general idea: the original rainbow metrics proposal, the momentum-space-inspired metric and a Finsler geometry approach. As the main result of this work we also present an alternative definition of a four-velocity dependent metric which allows one to handle the massless limit. This paper aims to highlight some of their properties and how to properly describe their relativistic realizations. (orig.)

Rainbows without unicorns: metric structures in theories with modified dispersion relations

Science.gov (United States)

Lobo, Iarley P.; Loret, Niccoló; Nettel, Francisco

2017-07-01

Rainbow metrics are a widely used approach to the metric formalism for theories with modified dispersion relations. They have had a huge success in the quantum gravity phenomenology literature, since they allow one to introduce momentum-dependent space-time metrics into the description of systems with a modified dispersion relation. In this paper, we introduce the reader to some realizations of this general idea: the original rainbow metrics proposal, the momentum-space-inspired metric and a Finsler geometry approach. As the main result of this work we also present an alternative definition of a four-velocity dependent metric which allows one to handle the massless limit. This paper aims to highlight some of their properties and how to properly describe their relativistic realizations.

Rainbows without unicorns: metric structures in theories with modified dispersion relations

Energy Technology Data Exchange (ETDEWEB)

Lobo, Iarley P. [Universita ' ' La Sapienza' ' , Dipartimento di Fisica, Rome (Italy); ICRANet, Pescara (Italy); CAPES Foundation, Ministry of Education of Brazil, Brasilia (Brazil); Universidade Federal da Paraiba, Departamento de Fisica, Joao Pessoa, PB (Brazil); INFN Sezione Roma 1 (Italy); Loret, Niccolo [Ruder Boskovic Institute, Division of Theoretical Physics, Zagreb (Croatia); Nettel, Francisco [Universita ' ' La Sapienza' ' , Dipartimento di Fisica, Rome (Italy); Universidad Nacional Autonoma de Mexico, Instituto de Ciencias Nucleares, Mexico (Mexico); INFN Sezione Roma 1 (Italy)

2017-07-15

Rainbow metrics are a widely used approach to the metric formalism for theories with modified dispersion relations. They have had a huge success in the quantum gravity phenomenology literature, since they allow one to introduce momentum-dependent space-time metrics into the description of systems with a modified dispersion relation. In this paper, we introduce the reader to some realizations of this general idea: the original rainbow metrics proposal, the momentum-space-inspired metric and a Finsler geometry approach. As the main result of this work we also present an alternative definition of a four-velocity dependent metric which allows one to handle the massless limit. This paper aims to highlight some of their properties and how to properly describe their relativistic realizations. (orig.)

Temporal variability of daily personal magnetic field exposure metrics in pregnant women.

Science.gov (United States)

Lewis, Ryan C; Evenson, Kelly R; Savitz, David A; Meeker, John D

2015-01-01

Recent epidemiology studies of power-frequency magnetic fields and reproductive health have characterized exposures using data collected from personal exposure monitors over a single day, possibly resulting in exposure misclassification due to temporal variability in daily personal magnetic field exposure metrics, but relevant data in adults are limited. We assessed the temporal variability of daily central tendency (time-weighted average, median) and peak (upper percentiles, maximum) personal magnetic field exposure metrics over 7 consecutive days in 100 pregnant women. When exposure was modeled as a continuous variable, central tendency metrics had substantial reliability, whereas peak metrics had fair (maximum) to moderate (upper percentiles) reliability. The predictive ability of a single-day metric to accurately classify participants into exposure categories based on a weeklong metric depended on the selected exposure threshold, with sensitivity decreasing with increasing exposure threshold. Consistent with the continuous measures analysis, sensitivity was higher for central tendency metrics than for peak metrics. If there is interest in peak metrics, more than 1 day of measurement is needed over the window of disease susceptibility to minimize measurement error, but 1 day may be sufficient for central tendency metrics.

Development of soil quality metrics using mycorrhizal fungi

Energy Technology Data Exchange (ETDEWEB)

Baar, J.

2010-07-01

Based on the Treaty on Biological Diversity of Rio de Janeiro in 1992 for maintaining and increasing biodiversity, several countries have started programmes monitoring soil quality and the above- and below ground biodiversity. Within the European Union, policy makers are working on legislation for soil protection and management. Therefore, indicators are needed to monitor the status of the soils and these indicators reflecting the soil quality, can be integrated in working standards or soil quality metrics. Soil micro-organisms, particularly arbuscular mycorrhizal fungi (AMF), are indicative of soil changes. These soil fungi live in symbiosis with the great majority of plants and are sensitive to changes in the physico-chemical conditions of the soil. The aim of this study was to investigate whether AMF are reliable and sensitive indicators for disturbances in the soils and can be used for the development of soil quality metrics. Also, it was studied whether soil quality metrics based on AMF meet requirements to applicability by users and policy makers. Ecological criterions were set for the development of soil quality metrics for different soils. Multiple root samples containing AMF from various locations in The Netherlands were analyzed. The results of the analyses were related to the defined criterions. This resulted in two soil quality metrics, one for sandy soils and a second one for clay soils, with six different categories ranging from very bad to very good. These soil quality metrics meet the majority of requirements for applicability and are potentially useful for the development of legislations for the protection of soil quality. (Author) 23 refs.

Measures of agreement between computation and experiment:validation metrics.

Energy Technology Data Exchange (ETDEWEB)

Barone, Matthew Franklin; Oberkampf, William Louis

2005-08-01

With the increasing role of computational modeling in engineering design, performance estimation, and safety assessment, improved methods are needed for comparing computational results and experimental measurements. Traditional methods of graphically comparing computational and experimental results, though valuable, are essentially qualitative. Computable measures are needed that can quantitatively compare computational and experimental results over a range of input, or control, variables and sharpen assessment of computational accuracy. This type of measure has been recently referred to as a validation metric. We discuss various features that we believe should be incorporated in a validation metric and also features that should be excluded. We develop a new validation metric that is based on the statistical concept of confidence intervals. Using this fundamental concept, we construct two specific metrics: one that requires interpolation of experimental data and one that requires regression (curve fitting) of experimental data. We apply the metrics to three example problems: thermal decomposition of a polyurethane foam, a turbulent buoyant plume of helium, and compressibility effects on the growth rate of a turbulent free-shear layer. We discuss how the present metrics are easily interpretable for assessing computational model accuracy, as well as the impact of experimental measurement uncertainty on the accuracy assessment.

Experiences with the Mobile Interactive Learning Table: a custom table for education

OpenAIRE

Wilson, Gregory

2011-01-01

Multi-touch technology on tabletop displays lets children interact with digital objects in collaborative and competitive ways. Multi-touch tables are not a part of classroom instruction because of high cost and lack of meaningful applications. This thesis explores possible solutions to building hardware and software that support the engagement of children. Outlined is a demonstration of our Mobile Interactive Learning Table (MILT), a custom hardware system that can be built for a cost well...

Tide or Tsunami? The Impact of Metrics on Scholarly Research

Science.gov (United States)

Bonnell, Andrew G.

2016-01-01

Australian universities are increasingly resorting to the use of journal metrics such as impact factors and ranking lists in appraisal and promotion processes, and are starting to set quantitative "performance expectations" which make use of such journal-based metrics. The widespread use and misuse of research metrics is leading to…

Term Based Comparison Metrics for Controlled and Uncontrolled Indexing Languages

Science.gov (United States)

Good, B. M.; Tennis, J. T.

2009-01-01

Introduction: We define a collection of metrics for describing and comparing sets of terms in controlled and uncontrolled indexing languages and then show how these metrics can be used to characterize a set of languages spanning folksonomies, ontologies and thesauri. Method: Metrics for term set characterization and comparison were identified and…

Software metrics: The key to quality software on the NCC project

Science.gov (United States)

Burns, Patricia J.

1993-01-01

Network Control Center (NCC) Project metrics are captured during the implementation and testing phases of the NCCDS software development lifecycle. The metrics data collection and reporting function has interfaces with all elements of the NCC project. Close collaboration with all project elements has resulted in the development of a defined and repeatable set of metrics processes. The resulting data are used to plan and monitor release activities on a weekly basis. The use of graphical outputs facilitates the interpretation of progress and status. The successful application of metrics throughout the NCC project has been instrumental in the delivery of quality software. The use of metrics on the NCC Project supports the needs of the technical and managerial staff. This paper describes the project, the functions supported by metrics, the data that are collected and reported, how the data are used, and the improvements in the quality of deliverable software since the metrics processes and products have been in use.

Aggregation Algorithms in Heterogeneous Tables

Directory of Open Access Journals (Sweden)

Titus Felix FURTUNA

2006-01-01

Full Text Available The heterogeneous tables are most used in the problem of aggregation. A solution for this problem is to standardize these tables of figures. In this paper, we proposed some methods of aggregation based on the hierarchical algorithms.

Detecting Functional Connectivity During Audiovisual Integration with MEG: A Comparison of Connectivity Metrics.

Science.gov (United States)

Ard, Tyler; Carver, Frederick W; Holroyd, Tom; Horwitz, Barry; Coppola, Richard

2015-08-01

In typical magnetoencephalography and/or electroencephalography functional connectivity analysis, researchers select one of several methods that measure a relationship between regions to determine connectivity, such as coherence, power correlations, and others. However, it is largely unknown if some are more suited than others for various types of investigations. In this study, the authors investigate seven connectivity metrics to evaluate which, if any, are sensitive to audiovisual integration by contrasting connectivity when tracking an audiovisual object versus connectivity when tracking a visual object uncorrelated with the auditory stimulus. The authors are able to assess the metrics' performances at detecting audiovisual integration by investigating connectivity between auditory and visual areas. Critically, the authors perform their investigation on a whole-cortex all-to-all mapping, avoiding confounds introduced in seed selection. The authors find that amplitude-based connectivity measures in the beta band detect strong connections between visual and auditory areas during audiovisual integration, specifically between V4/V5 and auditory cortices in the right hemisphere. Conversely, phase-based connectivity measures in the beta band as well as phase and power measures in alpha, gamma, and theta do not show connectivity between audiovisual areas. The authors postulate that while beta power correlations detect audiovisual integration in the current experimental context, it may not always be the best measure to detect connectivity. Instead, it is likely that the brain utilizes a variety of mechanisms in neuronal communication that may produce differential types of temporal relationships.

48 CFR 611.002-70 - Metric system implementation.

Science.gov (United States)

2010-10-01

... with security, operations, economic, technical, logistical, training and safety requirements. (3) The... total cost of the retrofit, including redesign costs, exceeds $50,000; (ii) Metric is not the accepted... office with an explanation for the disapproval. (7) The in-house operating metric costs shall be...

Dosimetric Effects Of Different Treatment Tables During Radiotherapy

International Nuclear Information System (INIS)

Murkovic, M.; Grego, T.; Bibic, J.

2015-01-01

The aim of our study was to measure the effect of mega-voltage photon beam attenuation when treating patients through carbon fibre treatment table with and without the carbon laminate base plate on it. We also examined the ability of XiO treatment planning system in modelling this effect. Direct attenuation measurements were made for two treatment tables, Siemens TxT 550 treatment table with TT-A table top and Elekta Precise table with iBEAM evo table top. On both treatment tables we used Orfit Base Plate (32301). Measurements were taken for two photon energies (6 MV and 18 MV), at two different field sizes (5 x 5 cm 2 and 10 x 10 cm 2 ) and different gantry angles in 50 intervals using stationary water phantom and Farmer type ionization chamber. These values were compared to values calculated in XiO. In order to account for the effect of table and base plate during treatment planning in XiO, customized table and base plate templates were develop in Focal planning system. To construct these customized templates, table and base plate contours as well as respective relative electron density's to water were obtained on CT scanner. The largest attenuation effect was seen for oblique treatment angles using low energy and small field sizes, 6.6 percent for the Elekta table top and 8.4 percent for Siemens table top. In this paper we show that customized table and base plate templates introduced in the patient treatment plan can accurately model the attenuation due to their presence to within 0.3 percent. Since dose modifications due to such carbon fiber accessories can be significant, it can be concluded that introduction of customized table and base plate templates into TPS brings an important improvement to patient treatment planning, and should be included in dose calculations whenever possible. (author).

Metrics for assessing retailers based on consumer perception

Directory of Open Access Journals (Sweden)

Klimin Anastasii

2017-01-01

Full Text Available The article suggests a new look at trading platforms, which is called “metrics.” Metrics are a way to look at the point of sale in a large part from the buyer’s side. The buyer enters the store and make buying decision based on those factors that the seller often does not consider, or considers in part, because “does not see” them, since he is not a buyer. The article proposes the classification of retailers, metrics and a methodology for their determination, presents the results of an audit of retailers in St. Petersburg on the proposed methodology.

Chaos of discrete dynamical systems in complete metric spaces

International Nuclear Information System (INIS)

Shi Yuming; Chen Guanrong

2004-01-01

This paper is concerned with chaos of discrete dynamical systems in complete metric spaces. Discrete dynamical systems governed by continuous maps in general complete metric spaces are first discussed, and two criteria of chaos are then established. As a special case, two corresponding criteria of chaos for discrete dynamical systems in compact subsets of metric spaces are obtained. These results have extended and improved the existing relevant results of chaos in finite-dimensional Euclidean spaces

Talking About Climate: a simple tool for everyday climate conversations

Science.gov (United States)

Twedt, J. R.; White, R. H.; Tigchelaar, M.; Doroschak, K.; Buchanan, R.; Lundquist, D.

2017-12-01

Public opinion research from the Yale Climate Opinion Maps shows that more than half of Americans are worried about climate change, yet over 70% of Americans rarely or never discuss it with friends or family. Sociologist Kari Marie Norgaard has written about climate denial and how the subject of climate change kills conversation in her interviews, even among people who feel concerned. At the same time, news reporting on climate is often dense with information or scientific nuance and fails to make people feel personally invested in this global issue. This is problematic, because a fair and civil response to our climate crisis will require not only the personal commitment of many, but also collaborative public discourse. For these reasons, we have developed an app that aims to foster meaningful conversation about climate change. The app draws on a database we constructed of historic climate events and relates these events to people's own lives and experiences. Our database is broad and growing, and includes climate change facts, landmark cases in environmental law, social achievements such as the IPCC earning the Nobel Peace Prize, and the personal account from a 12-year old's blog post about FEMA relocation after Hurricane Katrina. Events are stated in plain language and accompanied by open-ended questions to spark discussion. The goal of ClimateConversations is not to inform or persuade, but to support reflective, open-ended conversation, to encourage personal storytelling about climate-related events, and to foster generative dialogue on an issue that all too often causes discomfort and social division. Here we present the climate science, social science, software, and design considerations that went into developing this app. We will also present early quantitative and qualitative metrics of it's use and effectiveness both in classroom and community settings.

Estimating chronic wasting disease susceptibility in cervids using real-time quaking-induced conversion.

Science.gov (United States)

Haley, Nicholas J; Rielinger, Rachel; Davenport, Kristen A; O'Rourke, Katherine; Mitchell, Gordon; Richt, Jürgen A

2017-11-01

In mammals, susceptibility to prion infection is primarily modulated by the host's cellular prion protein (PrP C ) sequence. In the sheep scrapie model, a graded scale of susceptibility has been established both in vivo and in vitro based on PrP C amino acids 136, 154 and 171, leading to global breeding programmes to reduce the prevalence of scrapie in sheep. Chronic wasting disease (CWD) resistance in cervids is often characterized as decreased prevalence and/or protracted disease progression in individuals with specific alleles; at present, no PrP C allele conferring absolute resistance in cervids has been identified. To model the susceptibility of various naturally occurring and hypothetical cervid PrP C alleles in vitro, we compared the amplification rates and amyloid extension efficiencies of eight distinct CWD isolates in recombinant cervid PrP C substrates using real-time quaking-induced conversion. We hypothesized that the in vitro conversion characteristics of these isolates in cervid substrates would correlate to in vivo susceptibility - permitting susceptibility prediction for the rare alleles found in nature. We also predicted that hypothetical alleles with multiple resistance-associated codons would be more resistant to in vitro conversion than natural alleles with a single resistant codon. Our studies demonstrate that in vitro conversion metrics align with in vivo susceptibility, and that alleles with multiple amino acid substitutions, each influencing resistance independently, do not necessarily contribute additively to conversion resistance. Importantly, we found that the naturally occurring whitetail deer QGAK substrate exhibited the slowest amplification rate among those evaluated, suggesting that further investigation of this allele and its resistance in vivo is warranted.

The correlation of metrics in complex networks with applications in functional brain networks

International Nuclear Information System (INIS)

Li, C; Wang, H; Van Mieghem, P; De Haan, W; Stam, C J

2011-01-01

An increasing number of network metrics have been applied in network analysis. If metric relations were known better, we could more effectively characterize networks by a small set of metrics to discover the association between network properties/metrics and network functioning. In this paper, we investigate the linear correlation coefficients between widely studied network metrics in three network models (Bárabasi–Albert graphs, Erdös–Rényi random graphs and Watts–Strogatz small-world graphs) as well as in functional brain networks of healthy subjects. The metric correlations, which we have observed and theoretically explained, motivate us to propose a small representative set of metrics by including only one metric from each subset of mutually strongly dependent metrics. The following contributions are considered important. (a) A network with a given degree distribution can indeed be characterized by a small representative set of metrics. (b) Unweighted networks, which are obtained from weighted functional brain networks with a fixed threshold, and Erdös–Rényi random graphs follow a similar degree distribution. Moreover, their metric correlations and the resultant representative metrics are similar as well. This verifies the influence of degree distribution on metric correlations. (c) Most metric correlations can be explained analytically. (d) Interestingly, the most studied metrics so far, the average shortest path length and the clustering coefficient, are strongly correlated and, thus, redundant. Whereas spectral metrics, though only studied recently in the context of complex networks, seem to be essential in network characterizations. This representative set of metrics tends to both sufficiently and effectively characterize networks with a given degree distribution. In the study of a specific network, however, we have to at least consider the representative set so that important network properties will not be neglected

Otherwise Engaged : Social Media from Vanity Metrics to Critical Analytics

NARCIS (Netherlands)

Rogers, R.

2018-01-01

Vanity metrics is a term that captures the measurement and display of how well one is doing in the “success theater” of social media. The notion of vanity metrics implies a critique of metrics concerning both the object of measurement as well as their capacity to measure unobtrusively or only to

IDENTIFYING MARKETING EFFECTIVENESS METRICS (Case study: East Azerbaijan`s industrial units)

OpenAIRE

Faridyahyaie, Reza; Faryabi, Mohammad; Bodaghi Khajeh Noubar, Hossein

2012-01-01

The Paper attempts to identify marketing eff ectiveness metrics in industrial units. The metrics investigated in this study are completely applicable and comprehensive, and consequently they can evaluate marketing eff ectiveness in various industries. The metrics studied include: Market Share, Profitability, Sales Growth, Customer Numbers, Customer Satisfaction and Customer Loyalty. The findings indicate that these six metrics are impressive when measuring marketing effectiveness. Data was ge...

Some observations on a fuzzy metric space

Energy Technology Data Exchange (ETDEWEB)

Gregori, V.

2017-07-01

Let $(X,d)$ be a metric space. In this paper we provide some observations about the fuzzy metric space in the sense of Kramosil and Michalek $(Y,N,/wedge)$, where $Y$ is the set of non-negative real numbers $[0,/infty[$ and $N(x,y,t)=1$ if $d(x,y)/leq t$ and $N(x,y,t)=0$ if $d(x,y)/geq t$. (Author)

22 CFR 226.15 - Metric system of measurement.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Metric system of measurement. 226.15 Section 226.15 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Pre-award Requirements § 226.15 Metric system of measurement. (a...

20 CFR 435.15 - Metric system of measurement.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Metric system of measurement. 435.15 Section 435.15 Employees' Benefits SOCIAL SECURITY ADMINISTRATION UNIFORM ADMINISTRATIVE REQUIREMENTS FOR... metric system is the preferred measurement system for U.S. trade and commerce. The Act requires each...

Conceptual Soundness, Metric Development, Benchmarking, and Targeting for PATH Subprogram Evaluation

Energy Technology Data Exchange (ETDEWEB)

Mosey. G.; Doris, E.; Coggeshall, C.; Antes, M.; Ruch, J.; Mortensen, J.

2009-01-01

The objective of this study is to evaluate the conceptual soundness of the U.S. Department of Housing and Urban Development (HUD) Partnership for Advancing Technology in Housing (PATH) program's revised goals and establish and apply a framework to identify and recommend metrics that are the most useful for measuring PATH's progress. This report provides an evaluative review of PATH's revised goals, outlines a structured method for identifying and selecting metrics, proposes metrics and benchmarks for a sampling of individual PATH programs, and discusses other metrics that potentially could be developed that may add value to the evaluation process. The framework and individual program metrics can be used for ongoing management improvement efforts and to inform broader program-level metrics for government reporting requirements.

Assessment of the Log-Euclidean Metric Performance in Diffusion Tensor Image Segmentation

Directory of Open Access Journals (Sweden)

Mostafa Charmi

2010-06-01

Full Text Available Introduction: Appropriate definition of the distance measure between diffusion tensors has a deep impact on Diffusion Tensor Image (DTI segmentation results. The geodesic metric is the best distance measure since it yields high-quality segmentation results. However, the important problem with the geodesic metric is a high computational cost of the algorithms based on it. The main goal of this paper is to assess the possible substitution of the geodesic metric with the Log-Euclidean one to reduce the computational cost of a statistical surface evolution algorithm. Materials and Methods: We incorporated the Log-Euclidean metric in the statistical surface evolution algorithm framework. To achieve this goal, the statistics and gradients of diffusion tensor images were defined using the Log-Euclidean metric. Numerical implementation of the segmentation algorithm was performed in the MATLAB software using the finite difference techniques. Results: In the statistical surface evolution framework, the Log-Euclidean metric was able to discriminate the torus and helix patterns in synthesis datasets and rat spinal cords in biological phantom datasets from the background better than the Euclidean and J-divergence metrics. In addition, similar results were obtained with the geodesic metric. However, the main advantage of the Log-Euclidean metric over the geodesic metric was the dramatic reduction of computational cost of the segmentation algorithm, at least by 70 times. Discussion and Conclusion: The qualitative and quantitative results have shown that the Log-Euclidean metric is a good substitute for the geodesic metric when using a statistical surface evolution algorithm in DTIs segmentation.

Absolutely minimal extensions of functions on metric spaces

International Nuclear Information System (INIS)

Milman, V A

1999-01-01

Extensions of a real-valued function from the boundary ∂X 0 of an open subset X 0 of a metric space (X,d) to X 0 are discussed. For the broad class of initial data coming under discussion (linearly bounded functions) locally Lipschitz extensions to X 0 that preserve localized moduli of continuity are constructed. In the set of these extensions an absolutely minimal extension is selected, which was considered before by Aronsson for Lipschitz initial functions in the case X 0 subset of R n . An absolutely minimal extension can be regarded as an ∞-harmonic function, that is, a limit of p-harmonic functions as p→+∞. The proof of the existence of absolutely minimal extensions in a metric space with intrinsic metric is carried out by the Perron method. To this end, ∞-subharmonic, ∞-superharmonic, and ∞-harmonic functions on a metric space are defined and their properties are established

PSQM-based RR and NR video quality metrics

Science.gov (United States)

Lu, Zhongkang; Lin, Weisi; Ong, Eeping; Yang, Xiaokang; Yao, Susu

2003-06-01

This paper presents a new and general concept, PQSM (Perceptual Quality Significance Map), to be used in measuring the visual distortion. It makes use of the selectivity characteristic of HVS (Human Visual System) that it pays more attention to certain area/regions of visual signal due to one or more of the following factors: salient features in image/video, cues from domain knowledge, and association of other media (e.g., speech or audio). PQSM is an array whose elements represent the relative perceptual-quality significance levels for the corresponding area/regions for images or video. Due to its generality, PQSM can be incorporated into any visual distortion metrics: to improve effectiveness or/and efficiency of perceptual metrics; or even to enhance a PSNR-based metric. A three-stage PQSM estimation method is also proposed in this paper, with an implementation of motion, texture, luminance, skin-color and face mapping. Experimental results show the scheme can improve the performance of current image/video distortion metrics.

Environmental Regulatory Update Table, December 1989

International Nuclear Information System (INIS)

Houlbert, L.M.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

1990-01-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action

Environmental regulatory update table, March 1989

International Nuclear Information System (INIS)

Houlberg, L.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

1989-04-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action

Environmental Regulatory Update Table, April 1989

International Nuclear Information System (INIS)

Houlberg, L.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

1989-05-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action

Environmental Regulatory Update Table, December 1991

Energy Technology Data Exchange (ETDEWEB)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1992-01-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, August 1990

International Nuclear Information System (INIS)

Houlberg, L.M.; Nikbakht, A.; Salk, M.S.

1990-09-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action

Environmental Regulatory Update Table, October 1991

Energy Technology Data Exchange (ETDEWEB)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1991-11-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, November 1991

Energy Technology Data Exchange (ETDEWEB)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1991-12-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, September 1991

Energy Technology Data Exchange (ETDEWEB)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1991-10-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Value-based metrics and Internet-based enterprises

Science.gov (United States)

Gupta, Krishan M.

2001-10-01

Within the last few years, a host of value-based metrics like EVA, MVA, TBR, CFORI, and TSR have evolved. This paper attempts to analyze the validity and applicability of EVA and Balanced Scorecard for Internet based organizations. Despite the collapse of the dot-com model, the firms engaged in e- commerce continue to struggle to find new ways to account for customer-base, technology, employees, knowledge, etc, as part of the value of the firm. While some metrics, like the Balance Scorecard are geared towards internal use, others like EVA are for external use. Value-based metrics are used for performing internal audits as well as comparing firms against one another; and can also be effectively utilized by individuals outside the firm looking to determine if the firm is creating value for its stakeholders.

Environmental Regulatory Update Table, January/February 1992

Energy Technology Data Exchange (ETDEWEB)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1992-03-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action. This table is for January/February 1992.

NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

Science.gov (United States)

Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

2003-01-01

The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

Scalar metric fluctuations in space-time matter inflation

International Nuclear Information System (INIS)

Anabitarte, Mariano; Bellini, Mauricio

2006-01-01

Using the Ponce de Leon background metric, which describes a 5D universe in an apparent vacuum: G-bar AB =0, we study the effective 4D evolution of both, the inflaton and gauge-invariant scalar metric fluctuations, in the recently introduced model of space-time matter inflation

10 CFR 600.306 - Metric system of measurement.

Science.gov (United States)

2010-01-01

... cause significant inefficiencies or loss of markets to United States firms. (b) Recipients are... Requirements for Grants and Cooperative Agreements With For-Profit Organizations General § 600.306 Metric... Competitiveness Act of 1988 (15 U.S.C. 205) and implemented by Executive Order 12770, states that: (1) The metric...

A heuristic way of obtaining the Kerr metric

International Nuclear Information System (INIS)

Enderlein, J.

1997-01-01

An intuitive, straightforward way of finding the metric of a rotating black hole is presented, based on the algebra of differential forms. The representation obtained for the metric displays a simplicity which is not obvious in the usual Boyer Lindquist coordinates. copyright 1997 American Association of Physics Teachers

Using metrics in stability of stochastic programming problems

Czech Academy of Sciences Publication Activity Database

Houda, Michal

2005-01-01

Roč. 13, č. 1 (2005), s. 128-134 ISSN 0572-3043 R&D Projects: GA ČR(CZ) GA402/04/1294 Institutional research plan: CEZ:AV0Z10750506 Keywords : stochastic programming * quantitative stability * Wasserstein metrics * Kolmogorov metrics * simulation study Subject RIV: BB - Applied Statistics, Operational Research

Synchronization of multi-agent systems with metric-topological interactions.

Science.gov (United States)

Wang, Lin; Chen, Guanrong

2016-09-01

A hybrid multi-agent systems model integrating the advantages of both metric interaction and topological interaction rules, called the metric-topological model, is developed. This model describes planar motions of mobile agents, where each agent can interact with all the agents within a circle of a constant radius, and can furthermore interact with some distant agents to reach a pre-assigned number of neighbors, if needed. Some sufficient conditions imposed only on system parameters and agent initial states are presented, which ensure achieving synchronization of the whole group of agents. It reveals the intrinsic relationships among the interaction range, the speed, the initial heading, and the density of the group. Moreover, robustness against variations of interaction range, density, and speed are investigated by comparing the motion patterns and performances of the hybrid metric-topological interaction model with the conventional metric-only and topological-only interaction models. Practically in all cases, the hybrid metric-topological interaction model has the best performance in the sense of achieving highest frequency of synchronization, fastest convergent rate, and smallest heading difference.

A new metric of the low-mode asymmetry for ignition target designs

International Nuclear Information System (INIS)

Gu, Jianfa; Dai, Zhensheng; Fan, Zhengfeng; Zou, Shiyang; Ye, Wenhua; Pei, Wenbing; Zhu, Shaoping

2014-01-01

In the deuterium-tritium inertial confinement fusion implosion experiments on the National Ignition Facility, the measured neutron yield and hot spot pressure are significantly lower than simulations. Understanding the underlying physics of the deficit is essential to achieving ignition. This paper investigates the low-mode areal density asymmetry in the main fuel of ignition capsule. It is shown that the areal density asymmetry breaks up the compressed shell and significantly reduces the conversion of implosion kinetic energy to hot spot internal energy, leading to the calculated hot spot pressure and neutron yield quite close to the experimental data. This indicates that the low-mode shell areal density asymmetry can explain part of the large discrepancy between simulations and experiments. Since only using the hot spot shape term could not adequately characterize the effects of the shell areal density asymmetry on implosion performance, a new metric of the low-mode asymmetry is developed to accurately measure the probability of ignition

Modified intuitionistic fuzzy metric spaces and some fixed point theorems

International Nuclear Information System (INIS)

Saadati, R.; Sedghi, S.; Shobe, N.

2008-01-01

Since the intuitionistic fuzzy metric space has extra conditions (see [Gregori V, Romaguera S, Veereamani P. A note on intuitionistic fuzzy metric spaces. Chaos, Solitons and Fractals 2006;28:902-5]). In this paper, we consider modified intuitionistic fuzzy metric spaces and prove some fixed point theorems in these spaces. All the results presented in this paper are new

Effect of thematic map misclassification on landscape multi-metric assessment.

Science.gov (United States)

Kleindl, William J; Powell, Scott L; Hauer, F Richard

2015-06-01

Advancements in remote sensing and computational tools have increased our awareness of large-scale environmental problems, thereby creating a need for monitoring, assessment, and management at these scales. Over the last decade, several watershed and regional multi-metric indices have been developed to assist decision-makers with planning actions of these scales. However, these tools use remote-sensing products that are subject to land-cover misclassification, and these errors are rarely incorporated in the assessment results. Here, we examined the sensitivity of a landscape-scale multi-metric index (MMI) to error from thematic land-cover misclassification and the implications of this uncertainty for resource management decisions. Through a case study, we used a simplified floodplain MMI assessment tool, whose metrics were derived from Landsat thematic maps, to initially provide results that were naive to thematic misclassification error. Using a Monte Carlo simulation model, we then incorporated map misclassification error into our MMI, resulting in four important conclusions: (1) each metric had a different sensitivity to error; (2) within each metric, the bias between the error-naive metric scores and simulated scores that incorporate potential error varied in magnitude and direction depending on the underlying land cover at each assessment site; (3) collectively, when the metrics were combined into a multi-metric index, the effects were attenuated; and (4) the index bias indicated that our naive assessment model may overestimate floodplain condition of sites with limited human impacts and, to a lesser extent, either over- or underestimated floodplain condition of sites with mixed land use.

Crowdsourcing metrics of digital collections

Directory of Open Access Journals (Sweden)

Tuula Pääkkönen

2015-12-01

Full Text Available In the National Library of Finland (NLF there are millions of digitized newspaper and journal pages, which are openly available via the public website  http://digi.kansalliskirjasto.fi. To serve users better, last year the front end was completely overhauled with its main aim in crowdsourcing features, e.g., by giving end-users the opportunity to create digital clippings and a personal scrapbook from the digital collections. But how can you know whether crowdsourcing has had an impact? How much crowdsourcing functionalities have been used so far? Did crowdsourcing work? In this paper the statistics and metrics of a recent crowdsourcing effort are analysed across the different digitized material types (newspapers, journals, ephemera. The subjects, categories and keywords given by the users are analysed to see which topics are the most appealing. Some notable public uses of the crowdsourced article clippings are highlighted. These metrics give us indications on how the end-users, based on their own interests, are investigating and using the digital collections. Therefore, the suggested metrics illustrate the versatility of the information needs of the users, varying from citizen science to research purposes. By analysing the user patterns, we can respond to the new needs of the users by making minor changes to accommodate the most active participants, while still making the service more approachable for those who are trying out the functionalities for the first time. Participation in the clippings and annotations can enrich the materials in unexpected ways and can possibly pave the way for opportunities of using crowdsourcing more also in research contexts. This creates more opportunities for the goals of open science since source data becomes ­available, making it possible for researchers to reach out to the general public for help. In the long term, utilizing, for example, text mining methods can allow these different end-user segments to

Integrating Safeguards into the Pit Disassembly and Conversion Facility

International Nuclear Information System (INIS)

Clark, T.G.

2002-01-01

In September 2000, the United States and the Russian Federation entered into an agreement which stipulates each country will irreversibly transform 34 metric tons of weapons-grade plutonium into material which could not be used for weapon purposes. Supporting the Department of Energy's (DOE) program to dispose of excess nuclear materials, the Pit Disassembly and Conversion Facility (PDCF) is being designed and constructed to disassemble the weapon ''pits'' and convert the nuclear material to an oxide form for fabrication into reactor fuel at the separate Mixed Oxide Fuel Fabrication Facility. The PDCF design incorporates automation to the maximum extent possible to facilitate material safeguards, reduce worker dose, and improve processing efficiency. This includes provisions for automated guided vehicle movements for shipping containers, material transport via automated conveyor between processes, remote process control monitoring, and automated Nondestructive Assay product systems

Environmental Regulatory Update Table, August 1991

Energy Technology Data Exchange (ETDEWEB)

Houlberg, L.M., Hawkins, G.T.; Salk, M.S.

1991-09-01

This Environmental Regulatory Update Table (August 1991) provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental regulatory update table, July 1991

Energy Technology Data Exchange (ETDEWEB)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1991-08-01

This Environmental Regulatory Update Table (July 1991) provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

First results from a combined analysis of CERN computing infrastructure metrics

Science.gov (United States)

Duellmann, Dirk; Nieke, Christian

2017-10-01

The IT Analysis Working Group (AWG) has been formed at CERN across individual computing units and the experiments to attempt a cross cutting analysis of computing infrastructure and application metrics. In this presentation we will describe the first results obtained using medium/long term data (1 months — 1 year) correlating box level metrics, job level metrics from LSF and HTCondor, IO metrics from the physics analysis disk pools (EOS) and networking and application level metrics from the experiment dashboards. We will cover in particular the measurement of hardware performance and prediction of job duration, the latency sensitivity of different job types and a search for bottlenecks with the production job mix in the current infrastructure. The presentation will conclude with the proposal of a small set of metrics to simplify drawing conclusions also in the more constrained environment of public cloud deployments.

Nonlinear Semi-Supervised Metric Learning Via Multiple Kernels and Local Topology.

Science.gov (United States)

Li, Xin; Bai, Yanqin; Peng, Yaxin; Du, Shaoyi; Ying, Shihui

2018-03-01

Changing the metric on the data may change the data distribution, hence a good distance metric can promote the performance of learning algorithm. In this paper, we address the semi-supervised distance metric learning (ML) problem to obtain the best nonlinear metric for the data. First, we describe the nonlinear metric by the multiple kernel representation. By this approach, we project the data into a high dimensional space, where the data can be well represented by linear ML. Then, we reformulate the linear ML by a minimization problem on the positive definite matrix group. Finally, we develop a two-step algorithm for solving this model and design an intrinsic steepest descent algorithm to learn the positive definite metric matrix. Experimental results validate that our proposed method is effective and outperforms several state-of-the-art ML methods.

Preconceptual design studies and cost data of depleted uranium hexafluoride conversion plants

International Nuclear Information System (INIS)

Jones, E

1999-01-01

One of the more important legacies left with the Department of Energy (DOE) after the privatization of the United States Enrichment Corporation is the large inventory of depleted uranium hexafluoride (DUF6). The DOE Office of Nuclear Energy, Science and Technology (NE) is responsible for the long-term management of some 700,000 metric tons of DUF6 stored at the sites of the two gaseous diffusion plants located at Paducah, Kentucky and Portsmouth, Ohio, and at the East Tennessee Technology Park in Oak Ridge, Tennessee. The DUF6 management program resides in NE's Office of Depleted Uranium Hexafluoride Management. The current DUF6 program has largely focused on the ongoing maintenance of the cylinders containing DUF6. However, the long-term management and eventual disposition of DUF6 is the subject of a Programmatic Environmental Impact Statement (PEIS) and Public Law 105-204. The first step for future use or disposition is to convert the material, which requires construction and long-term operation of one or more conversion plants. To help inform the DUF6 program's planning activities, it was necessary to perform design and cost studies of likely DUF6 conversion plants at the preconceptual level, beyond the PEIS considerations but not as detailed as required for conceptual designs of actual plants. This report contains the final results from such a preconceptual design study project. In this fast track, three month effort, Lawrence Livermore National Laboratory and Bechtel National Incorporated developed and evaluated seven different preconceptual design cases for a single plant. The preconceptual design, schedules, costs, and issues associated with specific DUF6 conversion approaches, operating periods, and ownership options were evaluated based on criteria established by DOE. The single-plant conversion options studied were similar to the dry-conversion process alternatives from the PEIS. For each of the seven cases considered, this report contains information on

On the topology defined by Thurston's asymmetric metric

DEFF Research Database (Denmark)

Papadopoulos, Athanase; Theret, Guillaume

2007-01-01

that the topology that the asymmetric metric L induces on Teichmüller space is the same as the usual topology. Furthermore, we show that L satisfies the axioms of a (not necessarily symmetric) metric in the sense of Busemann and conclude that L is complete in the sense of Busemann....

An accurate metric for the spacetime around neutron stars

OpenAIRE

Pappas, George

2016-01-01

The problem of having an accurate description of the spacetime around neutron stars is of great astrophysical interest. For astrophysical applications, one needs to have a metric that captures all the properties of the spacetime around a neutron star. Furthermore, an accurate appropriately parameterised metric, i.e., a metric that is given in terms of parameters that are directly related to the physical structure of the neutron star, could be used to solve the inverse problem, which is to inf...

Analytic convergence of harmonic metrics for parabolic Higgs bundles

Science.gov (United States)

Kim, Semin; Wilkin, Graeme

2018-04-01

In this paper we investigate the moduli space of parabolic Higgs bundles over a punctured Riemann surface with varying weights at the punctures. We show that the harmonic metric depends analytically on the weights and the stable Higgs bundle. This gives a Higgs bundle generalisation of a theorem of McOwen on the existence of hyperbolic cone metrics on a punctured surface within a given conformal class, and a generalisation of a theorem of Judge on the analytic parametrisation of these metrics.

A software quality model and metrics for risk assessment

Science.gov (United States)

Hyatt, L.; Rosenberg, L.

1996-01-01

A software quality model and its associated attributes are defined and used as the model for the basis for a discussion on risk. Specific quality goals and attributes are selected based on their importance to a software development project and their ability to be quantified. Risks that can be determined by the model's metrics are identified. A core set of metrics relating to the software development process and its products is defined. Measurements for each metric and their usability and applicability are discussed.

Contrasting Various Metrics for Measuring Tropical Cyclone Activity

Directory of Open Access Journals (Sweden)

Jia-Yuh Yu Ping-Gin Chiu

2012-01-01

Full Text Available Popular metrics used for measuring the tropical cyclone (TC activity, including NTC (number of tropical cyclones, TCD (tropical cyclone days, ACE (accumulated cyclone energy, PDI (power dissipation index, along with two newly proposed indices: RACE (revised accumulated cyclone energy and RPDI (revised power dissipation index, are compared using the JTWC (Joint Typhoon Warning Center best-track data of TC over the western North Pacific basin. Our study shows that, while the above metrics have demonstrated various degrees of discrepancies, but in practical terms, they are all able to produce meaningful temporal and spatial changes in response to climate variability. Compared with the conventional ACE and PDI, RACE and RPDI seem to provide a more precise estimate of the total TC activity, especially in projecting the upswing trend of TC activity over the past few decades, simply because of a better approach in estimating TC wind energy. However, we would argue that there is still no need to find a ¡§universal¡¨ or ¡§best¡¨ metric for TC activity because different metrics are designed to stratify different aspects of TC activity, and whether the selected metric is appropriate or not should be determined solely by the purpose of study. Except for magnitude difference, the analysis results seem insensitive to the choice of the best-track datasets.

Tracking occupational hearing loss across global industries: a comparative analysis of metrics.

Science.gov (United States)

Rabinowitz, Peter M; Galusha, Deron; McTague, Michael F; Slade, Martin D; Wesdock, James C; Dixon-Ernst, Christine

2012-01-01

Occupational hearing loss is one of the most prevalent occupational conditions; yet, there is no acknowledged international metric to allow comparisons of risk between different industries and regions. In order to make recommendations for an international standard of occupational hearing loss, members of an international industry group (the International Aluminium Association) submitted details of different hearing loss metrics currently in use by members. We compared the performance of these metrics using an audiometric data set for over 6000 individuals working in 10 locations of one member company. We calculated rates for each metric at each location from 2002 to 2006. For comparison, we calculated the difference of observed-expected (for age) binaural high-frequency hearing loss (in dB/year) for each location over the same time period. We performed linear regression to determine the correlation between each metric and the observed-expected rate of hearing loss. The different metrics produced discrepant results, with annual rates ranging from 0.0% for a less-sensitive metric to more than 10% for a highly sensitive metric. At least two metrics, a 10dB age-corrected threshold shift from baseline and a 15dB nonage-corrected shift metric, correlated well with the difference of observed-expected high-frequency hearing loss. This study suggests that it is feasible to develop an international standard for tracking occupational hearing loss in industrial working populations.

A table top exercise and workshop

International Nuclear Information System (INIS)

Lakey, J.R.A.

1992-01-01

Table top exercises are widely applied in training for emergency preparedness and have long been a feature of Courses on Planning for Nuclear Emergencies. Experience of a large number of table top exercises is used to provide a classification of the types of exercise indicating the application and the disadvantages. The use of workshops is considered to be complementary rather than an alternative to teaching methods available from table top exercises. (author)

Correlation between centrality metrics and their application to the opinion model

NARCIS (Netherlands)

Li, C.; Li, Q.; Van Mieghem, P.F.A.; Stanley, H.E.; Wang, H.

2015-01-01

In recent decades, a number of centrality metrics describing network properties of nodes have been proposed to rank the importance of nodes. In order to understand the correlations between centrality metrics and to approximate a high-complexity centrality metric by a strongly correlated

INFORMATIVE ENERGY METRIC FOR SIMILARITY MEASURE IN REPRODUCING KERNEL HILBERT SPACES

Directory of Open Access Journals (Sweden)

Songhua Liu

2012-02-01

Full Text Available In this paper, information energy metric (IEM is obtained by similarity computing for high-dimensional samples in a reproducing kernel Hilbert space (RKHS. Firstly, similar/dissimilar subsets and their corresponding informative energy functions are defined. Secondly, IEM is proposed for similarity measure of those subsets, which converts the non-metric distances into metric ones. Finally, applications of this metric is introduced, such as classification problems. Experimental results validate the effectiveness of the proposed method.

Global Reference Tables for Production Systems

Data.gov (United States)

Social Security Administration — This database is a collection of reference tables that store common information used throughout SSA. These tables standardized code structures and code usage of SSA...

The Periodic Table in Croatia

Directory of Open Access Journals (Sweden)

Raos, N.

2011-12-01

Full Text Available The Croatian (Yugoslav Academy of Sciences and Arts was the first academy to elect D. I. Mendeleev as its honorary member (1882, whereas the periodic table of the elements has been taught regularly at the Zagreb University since 1888. The early interest of Croatian chemists in the periodic table should be attributed primarily to their pan-Slavic attitude, particularly as proof that Slavic people were able to produce "their own Newtons" (M. V. Lomonosov and D. I. Mendeleev. Such enthusiastic views, however, did not help in analyzing the contribution of Mendeleev and other scientists to the discovery and development of the periodic table of the elements.

A Validation of Object-Oriented Design Metrics as Quality Indicators

Science.gov (United States)

Basili, Victor R.; Briand, Lionel C.; Melo, Walcelio

1997-01-01

This paper presents the results of a study in which we empirically investigated the suits of object-oriented (00) design metrics introduced in another work. More specifically, our goal is to assess these metrics as predictors of fault-prone classes and, therefore, determine whether they can be used as early quality indicators. This study is complementary to the work described where the same suite of metrics had been used to assess frequencies of maintenance changes to classes. To perform our validation accurately, we collected data on the development of eight medium-sized information management systems based on identical requirements. All eight projects were developed using a sequential life cycle model, a well-known 00 analysis/design method and the C++ programming language. Based on empirical and quantitative analysis, the advantages and drawbacks of these 00 metrics are discussed. Several of Chidamber and Kamerer's 00 metrics appear to be useful to predict class fault-proneness during the early phases of the life-cycle. Also, on our data set, they are better predictors than 'traditional' code metrics, which can only be collected at a later phase of the software development processes.

Scenario-based table top simulations

DEFF Research Database (Denmark)

Broberg, Ole; Edwards, Kasper; Nielsen, J.

2012-01-01

This study developed and tested a scenario-based table top simulation method in a user-driven innovation setting. A team of researchers worked together with a user group of five medical staff members from the existing clinic. Table top simulations of a new clinic were carried out in a simple model...

A Numerical Framework for Sobolev Metrics on the Space of Curves

DEFF Research Database (Denmark)

Bauer, Martin; Bruveris, Martins; Harms, Philipp

2017-01-01

Statistical shape analysis can be done in a Riemannian framework by endowing the set of shapes with a Riemannian metric. Sobolev metrics of order two and higher on shape spaces of parametrized or unparametrized curves have several desirable properties not present in lower order metrics...

Self-dual metrics with self-dual Killing vectors

International Nuclear Information System (INIS)

Tod, K.P.; Ward, R.S.

1979-01-01

Twistor methods are used to derive a class of solutions to Einstein's vacuum equations, with anti-self dual Weyl tensor. In particular, all metrics with a Killing vector whose derivative is anti-self-dual and which admit a real positive-definite section are exhibited and shown to coincide with the metrics of Hawking. (author)

27 CFR 4.72 - Metric standards of fill.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Metric standards of fill. 4.72 Section 4.72 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF WINE Standards of Fill for Wine § 4.72 Metric...

Some Reflections on the Periodic Table and Its Use.

Science.gov (United States)

Fernelius, W. Conard

1986-01-01

Discusses early periodic tables; effect on the periodic table of atomic numbers; the periodic table in relation to electron distribution in the atoms of elements; terms and concepts related to the table; and the modern basis of the periodic table. Additional comments about these and other topics are included. (JN)

Scanning table BIP 101 for bubble chamber pictures

International Nuclear Information System (INIS)

Calmels, C.

1966-09-01

BIP 101 is a new scanning table for bubble chamber pictures, especially aimed at the full scale projection of the CERN 2 m hydrogen chamber. The table itself is divided in two half tables, each of them receiving, successively or simultaneously, the projections of 2 of the 4 films. Projectors with film transport are located in the central space between both half tables. Their light is reflected on 2 mirrors fixed at the ceiling. Thus the 4 sides of the table are freely accessible to the scanners. It will be possible to equip later the table with digitizers, allowing pre-measurements of the events for HPD device, or even measurements. (author) [fr

Summer temperature metrics for predicting brook trout (Salvelinus fontinalis) distribution in streams

Science.gov (United States)

Parrish, Donna; Butryn, Ryan S.; Rizzo, Donna M.

2012-01-01

We developed a methodology to predict brook trout (Salvelinus fontinalis) distribution using summer temperature metrics as predictor variables. Our analysis used long-term fish and hourly water temperature data from the Dog River, Vermont (USA). Commonly used metrics (e.g., mean, maximum, maximum 7-day maximum) tend to smooth the data so information on temperature variation is lost. Therefore, we developed a new set of metrics (called event metrics) to capture temperature variation by describing the frequency, area, duration, and magnitude of events that exceeded a user-defined temperature threshold. We used 16, 18, 20, and 22°C. We built linear discriminant models and tested and compared the event metrics against the commonly used metrics. Correct classification of the observations was 66% with event metrics and 87% with commonly used metrics. However, combined event and commonly used metrics correctly classified 92%. Of the four individual temperature thresholds, it was difficult to assess which threshold had the “best” accuracy. The 16°C threshold had slightly fewer misclassifications; however, the 20°C threshold had the fewest extreme misclassifications. Our method leveraged the volumes of existing long-term data and provided a simple, systematic, and adaptable framework for monitoring changes in fish distribution, specifically in the case of irregular, extreme temperature events.

Metrical presentation boosts implicit learning of artificial grammar.

Science.gov (United States)

Selchenkova, Tatiana; François, Clément; Schön, Daniele; Corneyllie, Alexandra; Perrin, Fabien; Tillmann, Barbara

2014-01-01

The present study investigated whether a temporal hierarchical structure favors implicit learning. An artificial pitch grammar implemented with a set of tones was presented in two different temporal contexts, notably with either a strongly metrical structure or an isochronous structure. According to the Dynamic Attending Theory, external temporal regularities can entrain internal oscillators that guide attention over time, allowing for temporal expectations that influence perception of future events. Based on this framework, it was hypothesized that the metrical structure provides a benefit for artificial grammar learning in comparison to an isochronous presentation. Our study combined behavioral and event-related potential measurements. Behavioral results demonstrated similar learning in both participant groups. By contrast, analyses of event-related potentials showed a larger P300 component and an earlier N2 component for the strongly metrical group during the exposure phase and the test phase, respectively. These findings suggests that the temporal expectations in the strongly metrical condition helped listeners to better process the pitch dimension, leading to improved learning of the artificial grammar.

NNDSS - Table II. Babesiosis to Campylobacteriosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

NNDSS - Table II. Chlamydia to Coccidioidomycosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Chlamydia to Coccidioidomycosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

NNDSS - Table II. Babesiosis to Campylobacteriosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2018. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

Stream Tables and Watershed Geomorphology Education.

Science.gov (United States)

Lillquist, Karl D.; Kinner, Patricia W.

2002-01-01

Reviews copious stream tables and provides a watershed approach to stream table exercises. Results suggest that this approach to learning the concepts of fluvial geomorphology is effective. (Contains 39 references.) (DDR)

NNDSS - Table II. Chlamydia to Coccidioidomycosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Chlamydia to Coccidioidomycosis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the...

NNDSS - Table II. Babesiosis to Coccidioidomycosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Coccidioidomycosis - 2014.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

NNDSS - Table II. Babesiosis to Campylobacteriosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during the...

NNDSS - Table II. Babesiosis to Campylobacteriosis

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

Metrics Evolution in an Energy Research and Development Program

International Nuclear Information System (INIS)

Dixon, Brent

2011-01-01

All technology programs progress through three phases: Discovery, Definition, and Deployment. The form and application of program metrics needs to evolve with each phase. During the discovery phase, the program determines what is achievable. A set of tools is needed to define program goals, to analyze credible technical options, and to ensure that the options are compatible and meet the program objectives. A metrics system that scores the potential performance of technical options is part of this system of tools, supporting screening of concepts and aiding in the overall definition of objectives. During the definition phase, the program defines what specifically is wanted. What is achievable is translated into specific systems and specific technical options are selected and optimized. A metrics system can help with the identification of options for optimization and the selection of the option for deployment. During the deployment phase, the program shows that the selected system works. Demonstration projects are established and classical systems engineering is employed. During this phase, the metrics communicate system performance. This paper discusses an approach to metrics evolution within the Department of Energy's Nuclear Fuel Cycle R and D Program, which is working to improve the sustainability of nuclear energy.

Research on quality metrics of wireless adaptive video streaming

Science.gov (United States)

Li, Xuefei

2018-04-01

With the development of wireless networks and intelligent terminals, video traffic has increased dramatically. Adaptive video streaming has become one of the most promising video transmission technologies. For this type of service, a good QoS (Quality of Service) of wireless network does not always guarantee that all customers have good experience. Thus, new quality metrics have been widely studies recently. Taking this into account, the objective of this paper is to investigate the quality metrics of wireless adaptive video streaming. In this paper, a wireless video streaming simulation platform with DASH mechanism and multi-rate video generator is established. Based on this platform, PSNR model, SSIM model and Quality Level model are implemented. Quality Level Model considers the QoE (Quality of Experience) factors such as image quality, stalling and switching frequency while PSNR Model and SSIM Model mainly consider the quality of the video. To evaluate the performance of these QoE models, three performance metrics (SROCC, PLCC and RMSE) which are used to make a comparison of subjective and predicted MOS (Mean Opinion Score) are calculated. From these performance metrics, the monotonicity, linearity and accuracy of these quality metrics can be observed.

Metrics for measuring net-centric data strategy implementation

Science.gov (United States)

Kroculick, Joseph B.

2010-04-01

An enterprise data strategy outlines an organization's vision and objectives for improved collection and use of data. We propose generic metrics and quantifiable measures for each of the DoD Net-Centric Data Strategy (NCDS) data goals. Data strategy metrics can be adapted to the business processes of an enterprise and the needs of stakeholders in leveraging the organization's data assets to provide for more effective decision making. Generic metrics are applied to a specific application where logistics supply and transportation data is integrated across multiple functional groups. A dashboard presents a multidimensional view of the current progress to a state where logistics data shared in a timely and seamless manner among users, applications, and systems.

Socio-technical security metrics

NARCIS (Netherlands)

Gollmann, D.; Herley, C.; Koenig, V.; Pieters, W.; Sasse, M.A.

2015-01-01

Report from Dagstuhl seminar 14491. This report documents the program and the outcomes of Dagstuhl Seminar 14491 “Socio-Technical Security Metrics”. In the domain of safety, metrics inform many decisions, from the height of new dikes to the design of nuclear plants. We can state, for example, that

Metrics for Probabilistic Geometries

DEFF Research Database (Denmark)

Tosi, Alessandra; Hauberg, Søren; Vellido, Alfredo

2014-01-01

the distribution over mappings is given by a Gaussian process. We treat the corresponding latent variable model as a Riemannian manifold and we use the expectation of the metric under the Gaussian process prior to define interpolating paths and measure distance between latent points. We show how distances...

Tracking occupational hearing loss across global industries: A comparative analysis of metrics

Directory of Open Access Journals (Sweden)

Peter M Rabinowitz

2012-01-01

Full Text Available Occupational hearing loss is one of the most prevalent occupational conditions; yet, there is no acknowledged international metric to allow comparisons of risk between different industries and regions. In order to make recommendations for an international standard of occupational hearing loss, members of an international industry group (the International Aluminium Association submitted details of different hearing loss metrics currently in use by members. We compared the performance of these metrics using an audiometric data set for over 6000 individuals working in 10 locations of one member company. We calculated rates for each metric at each location from 2002 to 2006. For comparison, we calculated the difference of observed-expected (for age binaural high-frequency hearing loss (in dB/year for each location over the same time period. We performed linear regression to determine the correlation between each metric and the observed-expected rate of hearing loss. The different metrics produced discrepant results, with annual rates ranging from 0.0% for a less-sensitive metric to more than 10% for a highly sensitive metric. At least two metrics, a 10dB age-corrected threshold shift from baseline and a 15dB nonage-corrected shift metric, correlated well with the difference of observed-expected high-frequency hearing loss. This study suggests that it is feasible to develop an international standard for tracking occupational hearing loss in industrial working populations.

Analyses Of Two End-User Software Vulnerability Exposure Metrics

Energy Technology Data Exchange (ETDEWEB)

Jason L. Wright; Miles McQueen; Lawrence Wellman

2012-08-01

The risk due to software vulnerabilities will not be completely resolved in the near future. Instead, putting reliable vulnerability measures into the hands of end-users so that informed decisions can be made regarding the relative security exposure incurred by choosing one software package over another is of importance. To that end, we propose two new security metrics, average active vulnerabilities (AAV) and vulnerability free days (VFD). These metrics capture both the speed with which new vulnerabilities are reported to vendors and the rate at which software vendors fix them. We then examine how the metrics are computed using currently available datasets and demonstrate their estimation in a simulation experiment using four different browsers as a case study. Finally, we discuss how the metrics may be used by the various stakeholders of software and to software usage decisions.

An Examination of Existing Guidelines for Programs for the Preservice and Inservice Education of Teachers in Metric Education and the Modification of These and the Development of New Ones if Deemed Necessary. Final Report of Objective No. 3.

Science.gov (United States)

Granito, Dolores

These guidelines for in-service and preservice teacher education related to the conversion to the metric system were developed from a survey of published materials, university faculty, and mathematics supervisors. The eleven guidelines fall into three major categories: (1) design of teacher training programs, (2) teacher training, and (3)…

On the (1,1)-tensor bundle with Cheeger–Gromoll type metric

Indian Academy of Sciences (India)

The main purpose of the present paper is to construct Riemannian almost product structures on the (1, 1)-tensor bundle equipped with Cheeger–Gromoll type metric over a Riemannian manifold and present some results concerning these structures. Keywords. Almost product structure; Cheeger–Gromoll type metric; metric ...

MetricForensics: A Multi-Level Approach for Mining Volatile Graphs

Energy Technology Data Exchange (ETDEWEB)

Henderson, Keith [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Eliassi-Rad, Tina [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Faloutsos, Christos [Carnegie Mellon Univ., Pittsburgh, PA (United States); Akoglu, Leman [Carnegie Mellon Univ., Pittsburgh, PA (United States); Li, Lei [Carnegie Mellon Univ., Pittsburgh, PA (United States); Maruhashi, Koji [Fujitsu Laboratories Ltd., Kanagawa (Japan); Prakash, B. Aditya [Carnegie Mellon Univ., Pittsburgh, PA (United States); Tong, H [Carnegie Mellon Univ., Pittsburgh, PA (United States)

2010-02-08

Advances in data collection and storage capacity have made it increasingly possible to collect highly volatile graph data for analysis. Existing graph analysis techniques are not appropriate for such data, especially in cases where streaming or near-real-time results are required. An example that has drawn significant research interest is the cyber-security domain, where internet communication traces are collected and real-time discovery of events, behaviors, patterns and anomalies is desired. We propose MetricForensics, a scalable framework for analysis of volatile graphs. MetricForensics combines a multi-level “drill down" approach, a collection of user-selected graph metrics and a collection of analysis techniques. At each successive level, more sophisticated metrics are computed and the graph is viewed at a finer temporal resolution. In this way, MetricForensics scales to highly volatile graphs by only allocating resources for computationally expensive analysis when an interesting event is discovered at a coarser resolution first. We test MetricForensics on three real-world graphs: an enterprise IP trace, a trace of legitimate and malicious network traffic from a research institution, and the MIT Reality Mining proximity sensor data. Our largest graph has »3M vertices and »32M edges, spanning 4:5 days. The results demonstrate the scalability and capability of MetricForensics in analyzing volatile graphs; and highlight four novel phenomena in such graphs: elbows, broken correlations, prolonged spikes, and strange stars.

Metric space construction for the boundary of space-time

International Nuclear Information System (INIS)

Meyer, D.A.

1986-01-01

A distance function between points in space-time is defined and used to consider the manifold as a topological metric space. The properties of the distance function are investigated: conditions under which the metric and manifold topologies agree, the relationship with the causal structure of the space-time and with the maximum lifetime function of Wald and Yip, and in terms of the space of causal curves. The space-time is then completed as a topological metric space; the resultant boundary is compared with the causal boundary and is also calculated for some pertinent examples

Metrics for Diagnosing Undersampling in Monte Carlo Tally Estimates

International Nuclear Information System (INIS)

Perfetti, Christopher M.; Rearden, Bradley T.

2015-01-01

This study explored the potential of using Markov chain convergence diagnostics to predict the prevalence and magnitude of biases due to undersampling in Monte Carlo eigenvalue and flux tally estimates. Five metrics were applied to two models of pressurized water reactor fuel assemblies and their potential for identifying undersampling biases was evaluated by comparing the calculated test metrics with known biases in the tallies. Three of the five undersampling metrics showed the potential to accurately predict the behavior of undersampling biases in the responses examined in this study.

Evaluation of Vehicle-Based Crash Severity Metrics.

Science.gov (United States)

Tsoi, Ada H; Gabler, Hampton C

2015-01-01

Vehicle change in velocity (delta-v) is a widely used crash severity metric used to estimate occupant injury risk. Despite its widespread use, delta-v has several limitations. Of most concern, delta-v is a vehicle-based metric which does not consider the crash pulse or the performance of occupant restraints, e.g. seatbelts and airbags. Such criticisms have prompted the search for alternative impact severity metrics based upon vehicle kinematics. The purpose of this study was to assess the ability of the occupant impact velocity (OIV), acceleration severity index (ASI), vehicle pulse index (VPI), and maximum delta-v (delta-v) to predict serious injury in real world crashes. The study was based on the analysis of event data recorders (EDRs) downloaded from the National Automotive Sampling System / Crashworthiness Data System (NASS-CDS) 2000-2013 cases. All vehicles in the sample were GM passenger cars and light trucks involved in a frontal collision. Rollover crashes were excluded. Vehicles were restricted to single-event crashes that caused an airbag deployment. All EDR data were checked for a successful, completed recording of the event and that the crash pulse was complete. The maximum abbreviated injury scale (MAIS) was used to describe occupant injury outcome. Drivers were categorized into either non-seriously injured group (MAIS2-) or seriously injured group (MAIS3+), based on the severity of any injuries to the thorax, abdomen, and spine. ASI and OIV were calculated according to the Manual for Assessing Safety Hardware. VPI was calculated according to ISO/TR 12353-3, with vehicle-specific parameters determined from U.S. New Car Assessment Program crash tests. Using binary logistic regression, the cumulative probability of injury risk was determined for each metric and assessed for statistical significance, goodness-of-fit, and prediction accuracy. The dataset included 102,744 vehicles. A Wald chi-square test showed each vehicle-based crash severity metric

NNDSS - Table II. Legionellosis to Malaria

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Legionellosis to Malaria - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

NNDSS - Table II. Meningococcal to Pertussis

Data.gov (United States)