WorldWideScience

Sample records for methods typically create

  1. The Typicality Ranking Task: A New Method to Derive Typicality Judgments from Children

    Science.gov (United States)

    Ameel, Eef; Storms, Gert

    2016-01-01

    An alternative method for deriving typicality judgments, applicable in young children that are not familiar with numerical values yet, is introduced, allowing researchers to study gradedness at younger ages in concept development. Contrary to the long tradition of using rating-based procedures to derive typicality judgments, we propose a method that is based on typicality ranking rather than rating, in which items are gradually sorted according to their typicality, and that requires a minimum of linguistic knowledge. The validity of the method is investigated and the method is compared to the traditional typicality rating measurement in a large empirical study with eight different semantic concepts. The results show that the typicality ranking task can be used to assess children’s category knowledge and to evaluate how this knowledge evolves over time. Contrary to earlier held assumptions in studies on typicality in young children, our results also show that preference is not so much a confounding variable to be avoided, but that both variables are often significantly correlated in older children and even in adults. PMID:27322371

  2. System and method for creating expert systems

    Science.gov (United States)

    Hughes, Peter M. (Inventor); Luczak, Edward C. (Inventor)

    1998-01-01

    A system and method provides for the creation of a highly graphical expert system without the need for programming in code. An expert system is created by initially building a data interface, defining appropriate Mission, User-Defined, Inferred, and externally-generated GenSAA (EGG) data variables whose data values will be updated and input into the expert system. Next, rules of the expert system are created by building appropriate conditions of the rules which must be satisfied and then by building appropriate actions of rules which are to be executed upon corresponding conditions being satisfied. Finally, an appropriate user interface is built which can be highly graphical in nature and which can include appropriate message display and/or modification of display characteristics of a graphical display object, to visually alert a user of the expert system of varying data values, upon conditions of a created rule being satisfied. The data interface building, rule building, and user interface building are done in an efficient manner and can be created without the need for programming in code.

  3. Creating Alternative Methods for Educational Evaluation.

    Science.gov (United States)

    Smith, Nick L.

    1981-01-01

    A project supported by the National Institute of Education is adapting evaluation procedures from such areas as philosophy, geography, operations research, journalism, film criticism, and other areas. The need for such methods is reviewed, as is the context in which they function, and their contributions to evaluation methodology. (Author/GK)

  4. Difficult Sudoku Puzzles Created by Replica Exchange Monte Carlo Method

    OpenAIRE

    Watanabe, Hiroshi

    2013-01-01

    An algorithm to create difficult Sudoku puzzles is proposed. An Ising spin-glass like Hamiltonian describing difficulty of puzzles is defined, and difficult puzzles are created by minimizing the energy of the Hamiltonian. We adopt the replica exchange Monte Carlo method with simultaneous temperature adjustments to search lower energy states efficiently, and we succeed in creating a puzzle which is the world hardest ever created in our definition, to our best knowledge. (Added on Mar. 11, the ...

  5. Examination of Hydrate Formation Methods: Trying to Create Representative Samples

    Energy Technology Data Exchange (ETDEWEB)

    Kneafsey, T.J.; Rees, E.V.L.; Nakagawa, S.; Kwon, T.-H.

    2011-04-01

    Forming representative gas hydrate-bearing laboratory samples is important so that the properties of these materials may be measured, while controlling the composition and other variables. Natural samples are rare, and have often experienced pressure and temperature changes that may affect the property to be measured [Waite et al., 2008]. Forming methane hydrate samples in the laboratory has been done a number of ways, each having advantages and disadvantages. The ice-to-hydrate method [Stern et al., 1996], contacts melting ice with methane at the appropriate pressure to form hydrate. The hydrate can then be crushed and mixed with mineral grains under controlled conditions, and then compacted to create laboratory samples of methane hydrate in a mineral medium. The hydrate in these samples will be part of the load-bearing frame of the medium. In the excess gas method [Handa and Stupin, 1992], water is distributed throughout a mineral medium (e.g. packed moist sand, drained sand, moistened silica gel, other porous media) and the mixture is brought to hydrate-stable conditions (chilled and pressurized with gas), allowing hydrate to form. This method typically produces grain-cementing hydrate from pendular water in sand [Waite et al., 2004]. In the dissolved gas method [Tohidi et al., 2002], water with sufficient dissolved guest molecules is brought to hydrate-stable conditions where hydrate forms. In the laboratory, this is can be done by pre-dissolving the gas of interest in water and then introducing it to the sample under the appropriate conditions. With this method, it is easier to form hydrate from more soluble gases such as carbon dioxide. It is thought that this method more closely simulates the way most natural gas hydrate has formed. Laboratory implementation, however, is difficult, and sample formation is prohibitively time consuming [Minagawa et al., 2005; Spangenberg and Kulenkampff, 2005]. In another version of this technique, a specified quantity of gas

  6. METHODS OF THE APPROXIMATE ESTIMATIONS OF FATIGUE DURABILITY OF COMPOSITE AIRFRAME COMPONENT TYPICAL ELEMENTS

    Directory of Open Access Journals (Sweden)

    V. E. Strizhius

    2015-01-01

    Full Text Available Methods of the approximate estimations of fatigue durability of composite airframe component typical elements which can be recommended for application at the stage of outline designing of the airplane are generated and presented.

  7. Method and Apparatus for Creating a Topography at a Surface

    Science.gov (United States)

    Adams, David P.; Sinclair, Michael B.; Mayer, Thomas M.; Vasile, Michael J.; Sweatt, William C.

    2008-11-11

    Methods and apparatus whereby an optical interferometer is utilized to monitor and provide feedback control to an integrated energetic particle column, to create desired topographies, including the depth, shape and/or roughness of features, at a surface of a specimen. Energetic particle columns can direct energetic species including, ions, photons and/or neutral particles to a surface to create features having in-plane dimensions on the order of 1 micron, and a height or depth on the order of 1 nanometer. Energetic processes can include subtractive processes such as sputtering, ablation, focused ion beam milling and, additive processes, such as energetic beam induced chemical vapor deposition. The integration of interferometric methods with processing by energetic species offers the ability to create desired topographies at surfaces, including planar and curved shapes.

  8. Advanced hydraulic fracturing methods to create in situ reactive barriers

    International Nuclear Information System (INIS)

    Murdoch, L.

    1997-01-01

    This article describes the use of hydraulic fracturing to increase permeability in geologic formations where in-situ remedial action of contaminant plumes will be performed. Several in-situ treatment strategies are discussed including the use of hydraulic fracturing to create in situ redox zones for treatment of organics and inorganics. Hydraulic fracturing methods offer a mechanism for the in-situ treatment of gently dipping layers of reactive compounds. Specialized methods using real-time monitoring and a high-energy jet during fracturing allow the form of the fracture to be influenced, such as creation of assymmetric fractures beneath potential sources (i.e. tanks, pits, buildings) that should not be penetrated by boring. Some examples of field applications of this technique such as creating fractures filled with zero-valent iron to reductively dechlorinate halogenated hydrocarbons, and the use of granular activated carbon to adsorb compounds are discussed

  9. Advanced hydraulic fracturing methods to create in situ reactive barriers

    International Nuclear Information System (INIS)

    Murdoch, L.; Siegrist, B.; Vesper, S.

    1997-01-01

    Many contaminated areas consist of a source area and a plume. In the source area, the contaminant moves vertically downward from a release point through the vadose zone to an underlying saturated region. Where contaminants are organic liquids, NAPL may accumulate on the water table, or it may continue to migrate downward through the saturated region. Early developments of permeable barrier technology have focused on intercepting horizontally moving plumes with vertical structures, such as trenches, filled with reactive material capable of immobilizing or degrading dissolved contaminants. This focus resulted in part from a need to economically treat the potentially large volumes of contaminated water in a plume, and in part from the availability of construction technology to create the vertical structures that could house reactive compounds. Contaminant source areas, however, have thus far remained largely excluded from the application of permeable barrier technology. One reason for this is the lack of conventional construction methods for creating suitable horizontal structures that would place reactive materials in the path of downward-moving contaminants. Methods of hydraulic fracturing have been widely used to create flat-lying to gently dipping layers of granular material in unconsolidated sediments. Most applications thus far have involved filling fractures with coarse-grained sand to create permeable layers that will increase the discharge of wells recovering contaminated water or vapor. However, it is possible to fill fractures with other compounds that alter the chemical composition of the subsurface. One early application involved development and field testing micro-encapsulated sodium percarbonate, a solid compound that releases oxygen and can create aerobic conditions suitable for biodegradation in the subsurface for several months

  10. A Hybrid Method for Generation of Typical Meteorological Years for Different Climates of China

    Directory of Open Access Journals (Sweden)

    Haixiang Zang

    2016-12-01

    Full Text Available Since a representative dataset of the climatological features of a location is important for calculations relating to many fields, such as solar energy system, agriculture, meteorology and architecture, there is a need to investigate the methodology for generating a typical meteorological year (TMY. In this paper, a hybrid method with mixed treatment of selected results from the Danish method, the Festa-Ratto method, and the modified typical meteorological year method is proposed to determine typical meteorological years for 35 locations in six different climatic zones of China (Tropical Zone, Subtropical Zone, Warm Temperate Zone, Mid Temperate Zone, Cold Temperate Zone and Tibetan Plateau Zone. Measured weather data (air dry-bulb temperature, air relative humidity, wind speed, pressure, sunshine duration and global solar radiation, which cover the period of 1994–2015, are obtained and applied in the process of forming TMY. The TMY data and typical solar radiation data are investigated and analyzed in this study. It is found that the results of the hybrid method have better performance in terms of the long-term average measured data during the year than the other investigated methods. Moreover, the Gaussian process regression (GPR model is recommended to forecast the monthly mean solar radiation using the last 22 years (1994–2015 of measured data.

  11. A novel method for creating custom shaped ballistic gelatin trainers using plaster molds.

    Science.gov (United States)

    Doctor, Michael; Katz, Anne; McNamara, Shannon O; Leifer, Jessica H; Bambrick-Santoyo, Gabriela; Saul, Turandot; Rose, Keith M

    2018-03-01

    Simulation based procedural training is an effective and frequently used method for teaching vascular access techniques which often require commercial trainers. These can be prohibitively expensive, which allows for homemade trainers made of gelatin to be a more cost-effective and attractive option. Previously described trainers are often rectangular with a flat surface that is dissimilar to human anatomy. We describe a novel method to create a more anatomically realistic trainer using ballistic gelatin, household items, and supplies commonly found in an emergency department such as the plaster wrap typically used to make splints.

  12. CREATING COMPETITIVE ORGANIZATIONAL STRATEGY USING THE FUNNEL METHOD

    Directory of Open Access Journals (Sweden)

    Lidija Stefanovska

    2015-11-01

    Full Text Available In the highly competitive environment of the 21st century, organizations must be able to effectively change through the application of effective strategies, quickly and in a way that the competitors will be unable to imitate. Therefore, the essential question in any organization is how to achieve and maintain competitive advantage. In this regard, strategic leaders should first logically consider what will bring a substantial advantage to the organization in a long-term, and then start with the process of creating the strategy. To achieve this, researchers in the field of managerial issues offer a concept of continuous process that begins by looking at the customers pattern, through defining the competitive environment and the place of business in it and finally categorizing several strategic business conditions, as a precondition for election and creation of a competitive strategy. This process can be presented as the “funnel for selection of competitive strategy”, in whose widest part we can put the customer matrix, in the middle part we can place definitions of the business outlook of the business and the position of the organization in those perspectives. In order to implement the "Funnel method" of strategic planning teams we need accurate, timely and relevant information based on which we can bring appropriate organizational strategy. The subject of this paper is displaying the Funnel method for selection of the competitive strategy, and presentation of the situation in some of the organizations in the Pelagonija region, related to the way and the information used to create organizational strategies through the Funnel method.

  13. Comparison of methods for generating typical meteorological year using meteorological data from a tropical environment

    Energy Technology Data Exchange (ETDEWEB)

    Janjai, S.; Deeyai, P. [Laboratory of Tropical Atmospheric Physics, Department of Physics, Faculty of Science, Silpakorn University, Nakhon Pathom 73000 (Thailand)

    2009-04-15

    This paper presents the comparison of methods for generating typical meteorological year (TMY) data set using a 10-year period of meteorological data from four stations in a tropical environment of Thailand. These methods are the Sadia National Laboratory method, the Danish method and the Festa and Ratto method. In investigating their performance, these methods were employed to generate TMYs for each station. For all parameters of the TMYs and the stations, statistical test indicates that there is no significant difference between the 10-year average values of these parameters and the corresponding average values from TMY generated from each method. The TMY obtained from each method was also used as input data to simulate two solar water heating systems and two photovoltaic systems with different sizes at the four stations by using the TRNSYS simulation program. Solar fractions and electrical output calculated using TMYs are in good agreement with those computed employing the 10-year period hourly meteorological data. It is concluded that the performance of the three methods has no significant difference for all stations under this investigation. Due to its simplicity, the method of Sandia National Laboratories is recommended for the generation of TMY for this tropical environment. The TMYs developed in this work can be used for solar energy and energy conservation applications at the four locations in Thailand. (author)

  14. A refined method for creating saccular aneurysms in the rabbit

    Energy Technology Data Exchange (ETDEWEB)

    Krings, Timo [Department of Neuroradiology, University Hospital of the University of Technology Aachen, Pauwelsstrase 30, 52057, Aachen (Germany); Department of Neurosurgery, University Hospital of the University of Technology Aachen, Pauwelsstrase 30, 52057, Aachen (Germany); Moeller-Hartmann, Walter; Meetz, Alexander; Dreeskamp, Heiko; Stein, Klaus-Peter; Thron, Armin [Department of Neuroradiology, University Hospital of the University of Technology Aachen, Pauwelsstrase 30, 52057, Aachen (Germany); Hans, Franz-Josef; Thiex, Ruth; Gilsbach, Joachim M. [Department of Neurosurgery, University Hospital of the University of Technology Aachen, Pauwelsstrase 30, 52057, Aachen (Germany); Brunn, Anna [Department of Neuropathology, University Hospital of the University of Technology Aachen, Pauwelsstrase 30, 52057, Aachen (Germany); Scherer, Kira [Department of Laboratory Animal Science, University Hospital of the University of Technology Aachen, Pauwelsstrase 30, 52057, Aachen (Germany)

    2003-07-01

    We describe a refined animal model of human intracerebral aneurysms for testing endovascular devices for interventional neuroradiological procedures. Saccular aneurysms resulting from a stump of the right common carotid artery (CCA) were created in 15 New Zealand White rabbits by intraluminal incubation of elastase that was applied to the CCA after distal ligation of the CCA and proximal occlusion of the vessel using a pliable balloon. Subsequently a microcatheter was advanced to a position cranial to the balloon and the elastase was infused under fluoroscopic guidance to avoid retrograde flow to the trachea via aberrant vessels. Contrast-enhanced (CE) MRA at 1.5 T and conventional digital subtraction angiography was performed to test for aneurysm size, morphology and neck anatomy. In all 15 animals aneurysms resulted from the stump of the right CCA, ranging in size from 2.0 to 9.9 mm (mean 6.3 mm) in craniocaudal direction, 1.0 to 5.5 mm (mean 3.8 mm) in mediolateral direction and 1.0 to 3.8 mm (mean 2.4 mm) in neck diameter. Aneurysm morphology could be adequately demonstrated using CE MRA. On histological evaluation a loss of the internal elastic lamina was noted. The described method represents an easy, reliable, and reproducible method of aneurysm creation in the rabbit in an area of high shear stress. These aneurysms can be used for testing new endovascular devices for embolization of intracranial aneurysms. (orig.)

  15. A refined method for creating saccular aneurysms in the rabbit

    International Nuclear Information System (INIS)

    Krings, Timo; Moeller-Hartmann, Walter; Meetz, Alexander; Dreeskamp, Heiko; Stein, Klaus-Peter; Thron, Armin; Hans, Franz-Josef; Thiex, Ruth; Gilsbach, Joachim M.; Brunn, Anna; Scherer, Kira

    2003-01-01

    We describe a refined animal model of human intracerebral aneurysms for testing endovascular devices for interventional neuroradiological procedures. Saccular aneurysms resulting from a stump of the right common carotid artery (CCA) were created in 15 New Zealand White rabbits by intraluminal incubation of elastase that was applied to the CCA after distal ligation of the CCA and proximal occlusion of the vessel using a pliable balloon. Subsequently a microcatheter was advanced to a position cranial to the balloon and the elastase was infused under fluoroscopic guidance to avoid retrograde flow to the trachea via aberrant vessels. Contrast-enhanced (CE) MRA at 1.5 T and conventional digital subtraction angiography was performed to test for aneurysm size, morphology and neck anatomy. In all 15 animals aneurysms resulted from the stump of the right CCA, ranging in size from 2.0 to 9.9 mm (mean 6.3 mm) in craniocaudal direction, 1.0 to 5.5 mm (mean 3.8 mm) in mediolateral direction and 1.0 to 3.8 mm (mean 2.4 mm) in neck diameter. Aneurysm morphology could be adequately demonstrated using CE MRA. On histological evaluation a loss of the internal elastic lamina was noted. The described method represents an easy, reliable, and reproducible method of aneurysm creation in the rabbit in an area of high shear stress. These aneurysms can be used for testing new endovascular devices for embolization of intracranial aneurysms. (orig.)

  16. Inverse operator method for solutions of nonlinear dynamical equations and some typical applications

    International Nuclear Information System (INIS)

    Fang Jinqing; Yao Weiguang

    1993-01-01

    The inverse operator method (IOM) is described briefly. We have realized the IOM for the solutions of nonlinear dynamical equations by the mathematics-mechanization (MM) with computers. They can then offer a new and powerful method applicable to many areas of physics. We have applied them successfully to study the chaotic behaviors of some nonlinear dynamical equations. As typical examples, the well-known Lorentz equation, generalized Duffing equation and two coupled generalized Duffing equations are investigated by using the IOM and the MM. The results are in good agreement with those given by Runge-Kutta method. So the IOM realized by the MM is of potential application valuable in nonlinear physics and many other fields

  17. A new method to predict the metadynamic recrystallization behavior in a typical nickel-based superalloy

    International Nuclear Information System (INIS)

    Lin, Y.C.; Chen, Xiao-Min; Chen, Ming-Song; Wen, Dong-Xu; Zhou, Ying; He, Dao-Guang

    2016-01-01

    The metadynamic recrystallization (MDRX) behaviors of a typical nickel-based superalloy are investigated by two-pass hot compression tests and four conventional stress-based conventional approaches (offset stress method, back-extrapolation stress method, peak stress method, and mean stress method). It is found that the conventional stress-based methods are not suitable to evaluate the MDRX softening fractions for the studied superalloy. Therefore, a new approach, 'maximum stress method', is proposed to evaluate the MDRX softening fraction. Based on the proposed method, the effects of deformation temperature, strain rate, initial average grain size, and interpass time on MDRX behaviors are discussed in detail. Results show that MDRX softening fraction is sensitive to deformation parameters. The MDRX softening fraction rapidly increases with the increase of deformation temperature, strain rate, and interpass time. The MDRX softening fraction in the coarse-grain material is lower than that in the fine-grain material. Moreover, the observed microstructures indicate that the initial coarse grains can be effectively refined by MDRX. Based on the experimental results, the kinetics equations are established and validated to describe the MDRX behaviors of the studied superalloy. (orig.)

  18. Material characteristics and construction methods for a typical research reactor concrete containment in Iran

    International Nuclear Information System (INIS)

    Ebrahimia, Mahsa; Suha, Kune Y.; Eghbalic, Rahman; Jahan, Farzaneh Asadi malek

    2012-01-01

    Generally selecting an appropriate material and also construction style for a concrete containment due to its function and special geometry play an important role in applicability and also construction cost and duration decrease in a research reactor (RR) project. The reactor containment enclosing the reactor vessel comprises physical barriers reflecting the safety design and construction codes, regulations and standards so as to prevent the community and the environment from uncontrolled release of radioactive materials. It is the third and the last barrier against radioactivity release. It protects the reactor vessel from such external events as earthquake and aircraft crash as well. Thus, it should be designed and constructed in such a manner as to withstand dead and live loads, ground and seismic loads, missiles and aircraft loads, and thermal and shrinkage loads. This study aims to present a construction method for concrete containment of a typical RR in Iran. The work also presents an acceptable characteristic for concrete and reinforcing re bar of a typical concrete containment. The current study has evaluated the various types of the RR containments. The most proper type was selected in accordance with the current knowledge and technology of Iran

  19. Material characteristics and construction methods for a typical research reactor concrete containment in Iran

    Energy Technology Data Exchange (ETDEWEB)

    Ebrahimia, Mahsa; Suha, Kune Y. [Seoul National Univ., Seoul (Korea, Republic of); Eghbalic, Rahman; Jahan, Farzaneh Asadi malek [School of Architecture and Urbanism, Qazvin (Iran, Islamic Republic of)

    2012-10-15

    Generally selecting an appropriate material and also construction style for a concrete containment due to its function and special geometry play an important role in applicability and also construction cost and duration decrease in a research reactor (RR) project. The reactor containment enclosing the reactor vessel comprises physical barriers reflecting the safety design and construction codes, regulations and standards so as to prevent the community and the environment from uncontrolled release of radioactive materials. It is the third and the last barrier against radioactivity release. It protects the reactor vessel from such external events as earthquake and aircraft crash as well. Thus, it should be designed and constructed in such a manner as to withstand dead and live loads, ground and seismic loads, missiles and aircraft loads, and thermal and shrinkage loads. This study aims to present a construction method for concrete containment of a typical RR in Iran. The work also presents an acceptable characteristic for concrete and reinforcing re bar of a typical concrete containment. The current study has evaluated the various types of the RR containments. The most proper type was selected in accordance with the current knowledge and technology of Iran.

  20. Self-informant Agreement for Personality and Evaluative Person Descriptors: Comparing Methods for Creating Informant Measures.

    Science.gov (United States)

    Simms, Leonard J; Zelazny, Kerry; Yam, Wern How; Gros, Daniel F

    2010-05-01

    Little attention typically is paid to the way self-report measures are translated for use in self-informant agreement studies. We studied two possible methods for creating informant measures: (a) the traditional method in which self-report items were translated from the first- to the third-person and (b) an alternative meta-perceptual method in which informants were directed to rate their perception of the targets' self-perception. We hypothesized that the latter method would yield stronger self-informant agreement for evaluative personality dimensions measured by indirect item markers. We studied these methods in a sample of 303 undergraduate friendship dyads. Results revealed mean-level differences between methods, similar self-informant agreement across methods, stronger agreement for Big Five dimensions than for evaluative dimensions, and incremental validity for meta-perceptual informant rating methods. Limited power reduced the interpretability of several sparse acquaintanceship effects. We conclude that traditional informant methods are appropriate for most personality traits, but meta-perceptual methods may be more appropriate when personality questionnaire items reflect indirect indicators of the trait being measured, which is particularly likely for evaluative traits.

  1. LBB evaluation for a typical Japanese PWR primary loop by using the US NRC approved methods

    Energy Technology Data Exchange (ETDEWEB)

    Swamy, S.A.; Bhowmick, D.C.; Prager, D.E. [Westinghouse Nuclear Technology Division, Pittsburgh, PA (United States)

    1997-04-01

    The regulatory requirements for postulated pipe ruptures have changed significantly since the first nuclear plants were designed. The Leak-Before-Break (LBB) methodology is now accepted as a technically justifiable approach for eliminating postulation of double-ended guillotine breaks (DEGB) in high energy piping systems. The previous pipe rupture design requirements for nuclear power plant applications are responsible for all the numerous and massive pipe whip restraints and jet shields installed for each plant. This results in significant plant congestion, increased labor costs and radiation dosage for normal maintenance and inspection. Also the restraints increase the probability of interference between the piping and supporting structures during plant heatup, thereby potentially impacting overall plant reliability. The LBB approach to eliminate postulating ruptures in high energy piping systems is a significant improvement to former regulatory methodologies, and therefore, the LBB approach to design is gaining worldwide acceptance. However, the methods and criteria for LBB evaluation depend upon the policy of individual country and significant effort continues towards accomplishing uniformity on a global basis. In this paper the historical development of the U.S. LBB criteria will be traced and the results of an LBB evaluation for a typical Japanese PWR primary loop applying U.S. NRC approved methods will be presented. In addition, another approach using the Japanese LBB criteria will be shown and compared with the U.S. criteria. The comparison will be highlighted in this paper with detailed discussion.

  2. A novel method for creating working space during endoscopic thyroidectomy via bilateral areolar approach.

    Science.gov (United States)

    Tan, Yi-Hong; Du, Guo-Neng; Xiao, Yu-Gen; Qiu, Wan-Shou; Wu, Tao

    2013-12-01

    Endoscopic thyroidectomy (ET) can be performed through the bilateral areolar approach (BAA). A working space (WS) is typically created on the surface of the pectoral fascia in the chest wall and in the subplatysmal space in the neck. There are several limitations of using this WS. The aim of this study was to establish a new WS for ET. A retrospective review was performed on 85 patients with benign thyroid nodules who had undergone ET through a BAA. A WS was created between the anterior and poster layers of the superficial pectoral fascia (SPF) in the chest and underneath the deep layer of the investing layer (IL) in the neck. The time for creating the WS was 7.2 ± 2.1 (range, 5-12) minutes. No hemorrhage occurred during the procedure. Fat liquefaction occurred in 2 patients. Edema of the neck skin flap presented as lack of a suprasternal notch. No skin numbness occurred. No patient required postoperative pain medication. All patients were extremely satisfied with the cosmetic results. This new method of establishing a WS between the two layers of the SPF and underneath the IL is simple and fast, provides good exposure, yields less postoperative pain, and has a lower risk of skin burn.

  3. Nuclear data for fusion: Validation of typical pre-processing methods for radiation transport calculations

    International Nuclear Information System (INIS)

    Hutton, T.; Sublet, J.C.; Morgan, L.; Leadbeater, T.W.

    2015-01-01

    Highlights: • We quantify the effect of processing nuclear data from ENDF to ACE format. • We consider the differences between fission and fusion angular distributions. • C-nat(n,el) at 2.0 MeV has a 0.6% deviation between original and processed data. • Fe-56(n,el) at 14.1 MeV has a 11.0% deviation between original and processed data. • Processed data do not accurately depict ENDF distributions for fusion energies. - Abstract: Nuclear data form the basis of the radiation transport codes used to design and simulate the behaviour of nuclear facilities, such as the ITER and DEMO fusion reactors. Typically these data and codes are biased towards fission and high-energy physics applications yet are still applied to fusion problems. With increasing interest in fusion applications, the lack of fusion specific codes and relevant data libraries is becoming increasingly apparent. Industry standard radiation transport codes require pre-processing of the evaluated data libraries prior to use in simulation. Historically these methods focus on speed of simulation at the cost of accurate data representation. For legacy applications this has not been a major concern, but current fusion needs differ significantly. Pre-processing reconstructs the differential and double differential interaction cross sections with a coarse binned structure, or more recently as a tabulated cumulative distribution function. This work looks at the validity of applying these processing methods to data used in fusion specific calculations in comparison to fission. The relative effects of applying this pre-processing mechanism, to both fission and fusion relevant reaction channels are demonstrated, and as such the poor representation of these distributions for the fusion energy regime. For the nat C(n,el) reaction at 2.0 MeV, the binned differential cross section deviates from the original data by 0.6% on average. For the 56 Fe(n,el) reaction at 14.1 MeV, the deviation increases to 11.0%. We

  4. CHOREOGRAPHIC METHODS FOR CREATING NOVEL, HIGH QUALITY DANCE

    Directory of Open Access Journals (Sweden)

    David Kirsh

    2016-02-01

    Full Text Available We undertook a detailed ethnographic study of the dance creation process of a noted choreographer and his distinguished troupe. All choreographer dancer interactions were videoed, the choreographer and dancers were interviewed extensively each day, as well as other observations and tests performed. The choreographer used three main methods to produce high quality and novel content: showing, making-on, and tasking. We present, analyze and evaluate these methods, and show how these approaches allow the choreographer to increase the creative output of the dancers and him. His methods, although designed for dance, apply more generally to other creative endeavors, especially where brainstorming is involved, and where the creative process is distributed over many individuals. His approach is also a case study in multi-modal direction, owing to the range of mechanisms he uses to communicate and direct.

  5. Creating and supporting a mixed methods health services research team.

    Science.gov (United States)

    Bowers, Barbara; Cohen, Lauren W; Elliot, Amy E; Grabowski, David C; Fishman, Nancy W; Sharkey, Siobhan S; Zimmerman, Sheryl; Horn, Susan D; Kemper, Peter

    2013-12-01

    To use the experience from a health services research evaluation to provide guidance in team development for mixed methods research. The Research Initiative Valuing Eldercare (THRIVE) team was organized by the Robert Wood Johnson Foundation to evaluate The Green House nursing home culture change program. This article describes the development of the research team and provides insights into how funders might engage with mixed methods research teams to maximize the value of the team. Like many mixed methods collaborations, the THRIVE team consisted of researchers from diverse disciplines, embracing diverse methodologies, and operating under a framework of nonhierarchical, shared leadership that required new collaborations, engagement, and commitment in the context of finite resources. Strategies to overcome these potential obstacles and achieve success included implementation of a Coordinating Center, dedicated time for planning and collaborating across researchers and methodologies, funded support for in-person meetings, and creative optimization of resources. Challenges are inevitably present in the formation and operation of effective mixed methods research teams. However, funders and research teams can implement strategies to promote success. © Health Research and Educational Trust.

  6. Method for creating high carbon content products from biomass oil

    Science.gov (United States)

    Parker, Reginald; Seames, Wayne

    2012-12-18

    In a method for producing high carbon content products from biomass, a biomass oil is added to a cracking reactor vessel. The biomass oil is heated to a temperature ranging from about 100.degree. C. to about 800.degree. C. at a pressure ranging from about vacuum conditions to about 20,700 kPa for a time sufficient to crack the biomass oil. Tar is separated from the cracked biomass oil. The tar is heated to a temperature ranging from about 200.degree. C. to about 1500.degree. C. at a pressure ranging from about vacuum conditions to about 20,700 kPa for a time sufficient to reduce the tar to a high carbon content product containing at least about 50% carbon by weight.

  7. Typical entanglement

    Science.gov (United States)

    Deelan Cunden, Fabio; Facchi, Paolo; Florio, Giuseppe; Pascazio, Saverio

    2013-05-01

    Let a pure state | ψ> be chosen randomly in an NM-dimensional Hilbert space, and consider the reduced density matrix ρ A of an N-dimensional subsystem. The bipartite entanglement properties of | ψ> are encoded in the spectrum of ρ A . By means of a saddle point method and using a "Coulomb gas" model for the eigenvalues, we obtain the typical spectrum of reduced density matrices. We consider the cases of an unbiased ensemble of pure states and of a fixed value of the purity. We finally obtain the eigenvalue distribution by using a statistical mechanics approach based on the introduction of a partition function.

  8. Creating Interactive Teaching Methods for ASTRO 101 That Really Work

    Science.gov (United States)

    Prather, E. E.; Adams, J. P.; Bailey, J. M.; Huggins, D.; Jones, L. V.; Slater, T. F.

    2004-05-01

    Acknowledging that lecture-based teaching methods are insufficient at promoting significant conceptual gains for students in the introductory astronomy course for non-science majors (ASTRO 101) is only the first step. But then, what can you do besides lecture? The Conceptual Astronomy and Physics Education Research (CAPER) Team at the University of Arizona has been developing and conducting research on the effectiveness of learner-centered instructional materials that put students in an active role in the classroom. With the support of an NSF CCLI (9952232) and NSF Geosciences Education (9907755) awards, we have designed and field-tested a set of innovative instructional materials called Lecture Tutorials. These Lecture Tutorial activities are intended for use with collaborative student learning groups and are designed specifically to be easily integrated into existing conventional lecture-based courses. As such, these instructional materials directly address the needs of heavily loaded teaching faculty in that they offer effective, learner-centered, classroom-ready activities that do not require any outside equipment/staffing or a drastic course revision for implementation. Each 15-minute Lecture-Tutorial poses a carefully crafted sequence of conceptually challenging, Socratic-dialogue driven questions, along with graphs and data tables, all designed to encourage students to reason critically about conceptually challenging and commonly taught topics in astronomy. The materials are based on research into student beliefs and reasoning difficulties and make use of a conceptual change instructional framework that promotes the intellectual engagement of students. Our research into the effectiveness of the Lecture Tutorials illustrates that traditional lectures alone make unsatisfactory gains on student understanding; however, supplementing traditional instruction with the lecture tutorials helps students make impressive conceptual gains over traditional instruction. In

  9. A METHOD FOR CREATING STRUCTURES OR DEVICES USING AN ORGANIC ICE RESIST

    DEFF Research Database (Denmark)

    2017-01-01

    The invention relates to a method for creating an organic resist on a surface of a cooled substrate, the method comprising the steps of condensing a vapour into a solid film on the surface of the cooled substrate; patterning at least part of the solid film by exposing selected portions of said...... solid film to at least one electron beam thereby creating the organic resist on 5 the surface of the cooled substrate in accordance with a predetermined pattern; wherein the created organic resist remains essentially intact at ambient conditions; and using the created organic resist as a mask...... for creating semiconductor structures and/or semiconductor devices....

  10. METHODICAL ASPECTS OF CREATING AND USING THE LANGUAGE E-BOOKS IN PRIMARY SCHOOL

    Directory of Open Access Journals (Sweden)

    Inna Khyzhnyak

    2016-10-01

    Full Text Available In the article the important role of electronic linguomethodical tools use in primary school and one of the largest groups of this means – Ukrainian language e-books are substantiated. This group contains, in author opinion, the different types of tools: visual (multimedia presentations, infographics, interactive posters, etc., practical (learning language games, training language aids, interactive crosswords, etc.; studying (learning language aids, etc. Each type has its creating and using methodical features in primary school. In addition, the use of various kinds of e-books must be systematic and take linguomethodical patterns of language teaching in primary school.The author gives a brief description each type of language e-books for primary school, describes the methods of their application and gives general guidance on their implementation in the learning process. A teacher is able to design and make all these types of electronic training manuals in Ukrainian language on his own using free software that allows to take into account the typical class features, its gender specificity, primary schoolchildren’s interests, to process local country studying information. In the conclusion author gives the main requirements to Ukrainian language e-books for a primary school: available and interesting for each pupil, despite the level of language development, use multimedia and hyperlinks, interactivity, predictable methodology of working with electronic trainers should be maximum simple, and its design should have national-patriotic character etc.

  11. Development of a segmentation method for analysis of Campos basin typical reservoir rocks

    Energy Technology Data Exchange (ETDEWEB)

    Rego, Eneida Arendt; Bueno, Andre Duarte [Universidade Estadual do Norte Fluminense Darcy Ribeiro (UENF), Macae, RJ (Brazil). Lab. de Engenharia e Exploracao de Petroleo (LENEP)]. E-mails: eneida@lenep.uenf.br; bueno@lenep.uenf.br

    2008-07-01

    This paper represents a master thesis proposal in Exploration and Reservoir Engineering that have the objective to development a specific segmentation method for digital images of reservoir rocks, which produce better results than the global methods available in the bibliography for the determination of rocks physical properties as porosity and permeability. (author)

  12. Carbon balance of the typical grain crop rotation in Moscow region assessed by eddy covariance method

    Science.gov (United States)

    Meshalkina, Joulia; Yaroslavtsev, Alexis; Vassenev, Ivan

    2017-04-01

    Croplands could have equal or even greater net ecosystem production than several natural ecosystems (Hollinger et al., 2004), so agriculture plays a substantial role in mitigation strategies for the reduction of carbon dioxide emissions. In Central Russia, where agricultural soils carbon loses are 9 time higher than natural (forest's) soils ones (Stolbovoi, 2002), the reduction of carbon dioxide emissions in agroecosystems must be the central focus of the scientific efforts. Although the balance of the CO2 mostly attributed to management practices, limited information exists regarding the crop rotation overall as potential of C sequestration. In this study, we present data on carbon balance of the typical grain crop rotation in Moscow region followed for 4 years by measuring CO2 fluxes by paired eddy covariance stations (EC). The study was conducted at the Precision Farming Experimental Fields of the Russian Timiryazev State Agricultural University, Moscow, Russia. The experimental site has a temperate and continental climate and situated in south taiga zone with Arable Sod-Podzoluvisols (Albeluvisols Umbric). Two fields of the four-course rotation were studied in 2013-2016. Crop rotation included winter wheat (Triticum sativum L.), barley (Hordeum vulgare L.), potato crop (Solanum tuberosum L.) and cereal-legume mixture (Vicia sativa L. and Avena sativa L.). Crops sowing occurred during the period from mid-April to mid-May depending on weather conditions. Winter wheat was sown in the very beginning of September and the next year it occurred from under the snow in the phase of tillering. White mustard (Sinapis alba) was sown for green manure after harvesting winter wheat in mid of July. Barley was harvested in mid of August, potato crop was harvested in September. Cereal-legume mixture on herbage was collected depending on the weather from early July to mid-August. Carbon uptake (NEE negative values) was registered only for the fields with winter wheat and white

  13. Comparing the methods plot and point-centered quarter to describe a woody community from typical Cerrado

    Directory of Open Access Journals (Sweden)

    Firmino Cardoso Pereira

    2015-05-01

    Full Text Available This article evaluates the effectiveness of the methods fixed area plots (AP and point-centered quarters (PQ to describe a woody community from typical Cerrado. We used 10 APs and 140 PQs, distributed into 5 transects. We compared the density of individuals, floristic composition, richness of families, genera, and species, and vertical and horizontal vegetation structure. The AP method was more effective to sample the density of individuals. The PQ method was more effective for characterizing species richness, vertical vegetation structure, and record of species with low abundance. The composition of families, genera, and species, as well as the species with higher importance value index in the community were similarly determined by the 2 methods. The methods compared are complementary. We suggest that the use of AP, PQ, or both methods may be aimed at the vegetation parameter under study.

  14. Methods of Creating a Personal Bibliography of a Composer’s Opus

    Directory of Open Access Journals (Sweden)

    Zoran Krstulović

    2014-04-01

    Full Text Available ABSTRACTThe article deals with different approaches to creating a personal bibliography of a composer’s opus. Methods of bibliographic descriptions of musical works in general bibliographies were examined with special emphasis on a thorough examination of methods of creating personal bibliographies of Slovenian composers from the beginning to the present. Special attention was given to the bibliographies of Emil Adamič, the first one dating in 1937 and the new one from the year 2004, and the bibliography of Vasilij Mirk. Three different approaches were identified. Bibliographic records are arranged according to the form of musical works, performers or types of music, furthermore, the records are arranged either alphabetically by the title or chronologically by the year of creation. Methods of creating a bibliography of a composer’s opus are presented for the first time resulting in guidelines for the organisation of bibliographic descriptions that will help bibliographers in their future endeavours.

  15. A New Method of Creating Technology/Function Matrix for Systematic Innovation without Expert

    Directory of Open Access Journals (Sweden)

    Tien-Yuan Cheng

    2012-02-01

    Full Text Available The technology/function matrix is comprised by specific technologies and functions, and through the technology/function matrix we can known what the technologies with functions have opportunities for innovation of product or technology. However, the technology/function matrix is very difficult to create, because the patents need to be read, analyzed and categorized into the technology/function matrix always more than hundreds or thousands. In this research, I propose a method to create a technology/function matrix just need to execute patent search without reading and analyzing patents. Through the proposed method anyone can create a technology/function matrix in a short time without experts’ help even if there are thousands of thousands of patents need to be read and analyzed.

  16. Optimal probabilistic energy management in a typical micro-grid based-on robust optimization and point estimate method

    International Nuclear Information System (INIS)

    Alavi, Seyed Arash; Ahmadian, Ali; Aliakbar-Golkar, Masoud

    2015-01-01

    Highlights: • Energy management is necessary in the active distribution network to reduce operation costs. • Uncertainty modeling is essential in energy management studies in active distribution networks. • Point estimate method is a suitable method for uncertainty modeling due to its lower computation time and acceptable accuracy. • In the absence of Probability Distribution Function (PDF) robust optimization has a good ability for uncertainty modeling. - Abstract: Uncertainty can be defined as the probability of difference between the forecasted value and the real value. As this probability is small, the operation cost of the power system will be less. This purpose necessitates modeling of system random variables (such as the output power of renewable resources and the load demand) with appropriate and practicable methods. In this paper, an adequate procedure is proposed in order to do an optimal energy management on a typical micro-grid with regard to the relevant uncertainties. The point estimate method is applied for modeling the wind power and solar power uncertainties, and robust optimization technique is utilized to model load demand uncertainty. Finally, a comparison is done between deterministic and probabilistic management in different scenarios and their results are analyzed and evaluated

  17. Characterization of typical irradiation channels of CNESTEN'S TRIGA Mark II reactor (Rabat, Morocco) using NAA K0-method

    International Nuclear Information System (INIS)

    Embarch, K.; Bounouira, H.; Bounakhla, M.; Amsil, H.; Jacimovic, R.

    2010-01-01

    The aim of this work is the use of neutron activation analysis using k0-standardization method to characterize some typical irradiation channels of the Moroccan TRIGA Mark II research reactor. The two parameters of neutron flux in the selected irradiation channels used for elemental concentration calculation, f (thermal-to-epithermal ratio) and α (deviation from the 1/E distribution), have been determined as well in the pneumatic tube (PT) as in the carousel facility (CR1) using the zirconium bare triple method. Results obtained for f and α in two irradiation channels show that f parameter determined in this way is different in the carousel facility (CR1) and the PT channel. This can be explained by the fact that the CR1 channel is situated in a graphite reflector and is relatively far from the reactor core, while the PT is in the core. Parameter α in the CR1 has a positive value, as expected, indicating that the neutron spectrum is relatively well thermalized. Parameter α in the PT has a negative value, which is very small and cannot significantly influence the final results obtained by k0-method. The method in our laboratory is validated by analyzing the elemental concentrations of the IAEA Standard Reference Material (Soil-7). All calculations were performed using Kay Win Software. (author)

  18. Estimation method for volumes of hot spots created by heavy ions

    International Nuclear Information System (INIS)

    Kanno, Ikuo; Kanazawa, Satoshi; Kajii, Yuji

    1999-01-01

    As a ratio of volumes of hot spots to cones, which have the same lengths and bottom radii with the ones of hot spots, a simple and convenient method for estimating the volumes of hot spots is described. This calculation method is useful for the study of damage producing mechanism in hot spots, and is also convenient for the estimation of the electron-hole densities in plasma columns created by heavy ions in semiconductor detectors. (author)

  19. Spinal Tissue Loading Created by Different Methods of Spinal Manipulative Therapy Application.

    Science.gov (United States)

    Funabashi, Martha; Nougarou, François; Descarreaux, Martin; Prasad, Narasimha; Kawchuk, Gregory N

    2017-05-01

    Comparative study using robotic replication of spinal manipulative therapy (SMT) vertebral kinematics together with serial dissection. The aim of this study was to quantify loads created in cadaveric spinal tissues arising from three different forms of SMT application. There exist many distinct methods by which to apply SMT. It is not known presently whether different forms of SMT application have different effects on spinal tissues. Should the method of SMT application modulate spinal tissue loading, quantifying this relation may help explain the varied outcomes of SMT in terms of effect and safety. SMT was applied to the third lumbar vertebra in 12 porcine cadavers using three SMT techniques: a clinical device that applies forces through a hand-held instrument (INST), a manual technique of applying SMT clinically (MAN) and a research device that applies parameters of manual SMT through a servo-controlled linear actuator motor (SERVO). The resulting kinematics from each SMT application were tracked optically via indwelling bone pins. The L3/L4 segment was then removed, mounted in a parallel robot and the resulting kinematics from SMT replayed for each SMT application technique. Serial dissection of spinal structures was conducted to quantify loading characteristics of discrete spinal tissues. In terms of load magnitude, SMT application with MAN and SERVO created greater forces than INST in all conditions (P < 0.05). Additionally, MAN and SERVO created comparable posterior forces in the intact specimen, but MAN created greater posterior forces on IVD structures compared to SERVO (P < 0.05). Specific methods of SMT application create unique vertebral loading characteristics, which may help explain the varied outcomes of SMT in terms of effect and safety. N/A.

  20. Inverse operator theory method mathematics-mechanization for the solutions of nonlinear equations and some typical applications in nonlinear physics

    International Nuclear Information System (INIS)

    Fang Jinqing; Yao Weiguang

    1992-12-01

    Inverse operator theory method (IOTM) has developed rapidly in the last few years. It is an effective and useful procedure for quantitative solution of nonlinear or stochastic continuous dynamical systems. Solutions are obtained in series form for deterministic equations, and in the case of stochastic equation it gives statistic measures of the solution process. A very important advantage of the IOTM is to eliminate a number of restrictive and assumption on the nature of stochastic processes. Therefore, it provides more realistic solutions. The IOTM and its mathematics-mechanization (MM) are briefly introduced. They are used successfully to study the chaotic behaviors of the nonlinear dynamical systems for the first time in the world. As typical examples, the Lorentz equation, generalized Duffing equation, two coupled generalized Duffing equations are investigated by the use of the IOTM and the MM. The results are in good agreement with ones by the Runge-Kutta method (RKM). It has higher accuracy and faster convergence. So the IOTM realized by the MM is of potential application valuable in nonlinear science

  1. Using futures methods to create transformative spaces: visions of a good Anthropocene in southern Africa

    Directory of Open Access Journals (Sweden)

    Laura M. Pereira

    2018-03-01

    Full Text Available The unique challenges posed by the Anthropocene require creative ways of engaging with the future and bringing about transformative change. Envisioning positive futures is a first step in creating a shared understanding and commitment that enables radical transformations toward sustainability in a world defined by complexity, diversity, and uncertainty. However, to create a transformative space in which truly unknowable futures can be explored, new experimental approaches are needed that go beyond merely extrapolating from the present into archetypal scenarios of the future. Here, we present a process of creative visioning where participatory methods and tools from the field of futures studies were combined in a novel way to create and facilitate a transformative space, with the aim of generating positive narrative visions for southern Africa. We convened a diverse group of participants in a workshop designed to develop radically different scenarios of good Anthropocenes, based on existing "seeds" of the future in the present. These seeds are innovative initiatives, practices, and ideas that are present in the world today, but are not currently widespread or dominant. As a result of a carefully facilitated process that encouraged a multiplicity of perspectives, creative immersion, and grappling with deeply held assumptions, four radical visions for southern Africa were produced. Although these futures are highly innovative and exploratory, they still link back to current real-world initiatives and contexts. The key learning that arose from this experience was the importance of the imagination for transformative thinking, the need to capitalize on diversity to push boundaries, and finally, the importance of creating a space that enables participants to engage with emotions, beliefs, and complexity. This method of engagement with the future has the potential to create transformative spaces that inspire and empower people to act toward positive

  2. Studies of fuel loading pattern optimization for a typical pressurized water reactor (PWR) using improved pivot particle swarm method

    International Nuclear Information System (INIS)

    Liu, Shichang; Cai, Jiejin

    2012-01-01

    Highlights: ► The mathematical model of loading pattern problems for PWR has been established. ► IPPSO was integrated with ‘donjon’ and ‘dragon’ into fuel arrangement optimizing code. ► The novel method showed highly efficiency for the LP problems. ► The core effective multiplication factor increases by about 10% in simulation cases. ► The power peaking factor decreases by about 0.6% in simulation cases. -- Abstract: An in-core fuel reload design tool using the improved pivot particle swarm method was developed for the loading pattern optimization problems in a typical PWR, such as Daya Bay Nuclear Power Plant. The discrete, multi-objective improved pivot particle swarm optimization, was integrated with the in-core physics calculation code ‘donjon’ based on finite element method, and assemblies’ group constant calculation code ‘dragon’, composing the optimization code for fuel arrangement. The codes of both ‘donjon’ and ‘dragon’ were programmed by Institute of Nuclear Engineering of Polytechnique Montréal, Canada. This optimization code was aiming to maximize the core effective multiplication factor (Keff), while keeping the local power peaking factor (Ppf) lower than a predetermined value to maintain fuel integrity. At last, the code was applied to the first cycle loading of Daya Bay Nuclear Power Plant. The result showed that, compared with the reference loading pattern design, the core effective multiplication factor increased by 9.6%, while the power peaking factor decreased by 0.6%, meeting the safety requirement.

  3. Creating multithemed ecological regions for macroscale ecology: Testing a flexible, repeatable, and accessible clustering method

    Science.gov (United States)

    Cheruvelil, Kendra Spence; Yuan, Shuai; Webster, Katherine E.; Tan, Pang-Ning; Lapierre, Jean-Francois; Collins, Sarah M.; Fergus, C. Emi; Scott, Caren E.; Norton Henry, Emily; Soranno, Patricia A.; Filstrup, Christopher T.; Wagner, Tyler

    2017-01-01

    Understanding broad-scale ecological patterns and processes often involves accounting for regional-scale heterogeneity. A common way to do so is to include ecological regions in sampling schemes and empirical models. However, most existing ecological regions were developed for specific purposes, using a limited set of geospatial features and irreproducible methods. Our study purpose was to: (1) describe a method that takes advantage of recent computational advances and increased availability of regional and global data sets to create customizable and reproducible ecological regions, (2) make this algorithm available for use and modification by others studying different ecosystems, variables of interest, study extents, and macroscale ecology research questions, and (3) demonstrate the power of this approach for the research question—How well do these regions capture regional-scale variation in lake water quality? To achieve our purpose we: (1) used a spatially constrained spectral clustering algorithm that balances geospatial homogeneity and region contiguity to create ecological regions using multiple terrestrial, climatic, and freshwater geospatial data for 17 northeastern U.S. states (~1,800,000 km2); (2) identified which of the 52 geospatial features were most influential in creating the resulting 100 regions; and (3) tested the ability of these ecological regions to capture regional variation in water nutrients and clarity for ~6,000 lakes. We found that: (1) a combination of terrestrial, climatic, and freshwater geospatial features influenced region creation, suggesting that the oft-ignored freshwater landscape provides novel information on landscape variability not captured by traditionally used climate and terrestrial metrics; and (2) the delineated regions captured macroscale heterogeneity in ecosystem properties not included in region delineation—approximately 40% of the variation in total phosphorus and water clarity among lakes was at the regional

  4. Unilateral pedicle screws asymmetric tethering: an innovative method to create idiopathic deformity

    Directory of Open Access Journals (Sweden)

    Zhang Xuesong

    2007-10-01

    Full Text Available Abstract Objective To evaluate the feasibility of the method that unilateral pedicle screws asymmetric tethering in concave side in combination with convex rib resection for creating idiopathic deformity. Summary of background data Various methods are performed to create idiopathic deformity. Among these methods, posterior asmmetric tethering of the spine shows satisfying result, but some drawbacks related to the current posterior asymmetric tether were still evident. Materials and methods Unilateral pedicle screws asymmetric tethering was performed to 14 female goats (age: 5–8 week-old, weight: 6–8 kg in concave side in combination with convex rib resection. Dorsoventral and lateral plain radiographs were taken of each thoracic spine in the frontal and sagittal planes right after the surgery and later every 4 weeks. Results All animals ambulated freely after surgery. For technical reasons, 2 goats were excluded (one animal died for anesthetic during the surgery, and one animal was lost for instrumental fail due to postoperative infection. Radiography showed that 11 goats exhibited scoliosis with convex toward to the right side, and as the curve increased with time, only 1 goat showed nonprogressive. The initial scoliosis generated in the progressors after the procedures measured 29.0° on average (range 23.0°–38.5° and increased to 43.0° on average (range 36.0°–58.0° over 8 to 10 weeks. The average progression of 14.0° was measured. The curvature immediately after tethering surgery (the initial Cobb angle did have a highly significant correlation with the final curvature (p Conclusion Unilateral pedicle screws asymmetric tethering is a practical method to create experimental scoliosis, especially for those who would like to study the correction of this deformity.

  5. Robust methods to create ex vivo minimum deformation atlases for brain mapping.

    Science.gov (United States)

    Janke, Andrew L; Ullmann, Jeremy F P

    2015-02-01

    Highly detailed ex vivo 3D atlases of average structure are of critical importance to neuroscience and its current push to understanding the global microstructure of the brain. Multiple single slice histology sections can no longer provide sufficient detail of inter-slice microstructure and lack out of plane resolution. Two ex vivo methods have emerged that can create such detailed models. High-field micro MRI with the addition of contrast media has allowed intact whole brain microstructure imaging with an isotropic resolution of 15 μm in mouse. Blockface imaging has similarly evolved to a point where it is now possible to image an entire brain in a rigorous fashion with an out of plane resolution of 10 μm. Despite the destruction of the tissue as part of this process it allows a reconstructed model that is free from cutting artifacts. Both of these methods have been utilised to create minimum deformation atlases that are representative of the respective populations. The MDA atlases allow us unprecedented insight into the commonality and differences in microstructure in cortical structures in specific taxa. In this paper we provide an overview of how to create such MDA models from ex vivo data. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. animation : An R Package for Creating Animations and Demonstrating Statistical Methods

    Directory of Open Access Journals (Sweden)

    Yihui Xie

    2013-04-01

    Full Text Available Animated graphs that demonstrate statistical ideas and methods can both attract interest and assist understanding. In this paper we first discuss how animations can be related to some statistical topics such as iterative algorithms, random simulations, (resampling methods and dynamic trends, then we describe the approaches that may be used to create animations, and give an overview to the R package animation, including its design, usage and the statistical topics in the package. With the animation package, we can export the animations produced by R into a variety of formats, such as a web page, a GIF animation, a Flash movie, a PDF document, or an MP4/AVI video, so that users can publish the animations fairly easily. The design of this package is flexible enough to be readily incorporated into web applications, e.g., we can generate animations online with Rweb, which means we do not even need R to be installed locally to create animations. We will show examples of the use of animations in teaching statistics and in the presentation of statistical reports using Sweave or knitr. In fact, this paper itself was written with the knitr and animation package, and the animations are embedded in the PDF document, so that readers can watch the animations in real time when they read the paper (the Adobe Reader is required.Animations can add insight and interest to traditional static approaches to teaching statistics and reporting, making statistics a more interesting and appealing subject.

  7. Identifying different methods for creating knowledge from lessons learned in project oriented organizations

    Directory of Open Access Journals (Sweden)

    Ahmad Norang

    2016-01-01

    Full Text Available Nowadays, the increase in competition has increased the relative importance of innovation for most firms and many managers believe a good innovation must be knowledge oriented. This paper has tried to determine different methods for creating knowledge in project oriented organizations. The study designs a questionnaire in Likert scale and distributes it among 32 experts who were well informed about different methods of knowledge creation and lessons learned. Cronbach alphas for all components of the survey were well above the desirable level. The study has detected 11 methods for knowledge creation and lessons learned. In terms of preliminary assessment, business transactions has received the highest impact while knowledge team has received the highest effect in terms of necessary assessment. The results of this survey have indicated that although there are several methods for detecting knowledge within organizations, in most cases, it is not easy to gain value added knowledge within an organization, quickly. The people who participated in our survey have indicated that organizational commitment, brainstorming, Delphi and storytelling also have played important role for creation of knowledge. The results have also shown that brainstorming, knowledge brokers, map knowledge and work experience were easier to use for knowledge creation and lessons learned compared with other forms of knowledge creation.

  8. Developing and setting up optical methods to study the speckle patterns created by optical beam smoothing

    International Nuclear Information System (INIS)

    Surville, J.

    2005-12-01

    We have developed three main optical methods to study the speckles generated by a smoothed laser source. The first method addresses the measurement of the temporal and spatial correlation functions of the source, with a modified Michelson interferometer. The second one is a pump-probe technique created to shoot a picture of a speckle pattern generated at a set time. And the third one is an evolution of the second method dedicated to time-frequency coding, thanks to a frequency chirped probe pulse. Thus, the speckles can be followed in time and their motion can be described. According to these three methods, the average size and duration of the speckles can be measured. It is also possible to measure the size and the duration of each of them and mostly their velocity in a given direction. All the results obtained have been confronted to the different existing theories. We show that the statistical distributions of the measured speckles'size and speckles'intensity agree satisfactorily with theoretical values

  9. A brain MRI bias field correction method created in the Gaussian multi-scale space

    Science.gov (United States)

    Chen, Mingsheng; Qin, Mingxin

    2017-07-01

    A pre-processing step is needed to correct for the bias field signal before submitting corrupted MR images to such image-processing algorithms. This study presents a new bias field correction method. The method creates a Gaussian multi-scale space by the convolution of the inhomogeneous MR image with a two-dimensional Gaussian function. In the multi-Gaussian space, the method retrieves the image details from the differentiation of the original image and convolution image. Then, it obtains an image whose inhomogeneity is eliminated by the weighted sum of image details in each layer in the space. Next, the bias field-corrected MR image is retrieved after the Υ correction, which enhances the contrast and brightness of the inhomogeneity-eliminated MR image. We have tested the approach on T1 MRI and T2 MRI with varying bias field levels and have achieved satisfactory results. Comparison experiments with popular software have demonstrated superior performance of the proposed method in terms of quantitative indices, especially an improvement in subsequent image segmentation.

  10. Stranger to friend enabler: creating a community of caring in African American research using ethnonursing methods.

    Science.gov (United States)

    Plowden, K O; Wenger, A F

    2001-01-01

    African Americans are facing a serious health crisis. They are disproportionately affected by most chronic illnesses. The disparity among ethic groups as it relates to health and illness is related to psychosocial and biological factors within the African American culture. Many African Americans are sometimes reluctant to participate in studies. This article discusses the process of creating a caring community when conducting research within an African American community based on the experience of the authors with two faith communities in a southern metropolitan area in the United States. The process is identified as unknowing, reflection, presence, and knowing. The process is based on Leininger's theory of culture care diversity and universality and her stranger to friend enabler. When the theory and method are used, the investigator moves from a stranger within the community to a trusted friend and begins to collect rich and valuable data for analysis from the informants' point of view.

  11. Natural transformation of Vibrio parahaemolyticus: A rapid method to create genetic deletions.

    Science.gov (United States)

    Chimalapati, Suneeta; de Souza Santos, Marcela; Servage, Kelly; De Nisco, Nicole J; Dalia, Ankur B; Orth, Kim

    2018-03-19

    The Gram-negative bacterium Vibrio parahaemolyticus is an opportunistic human pathogen and the leading cause of seafood borne acute gastroenteritis worldwide. Recently, this bacterium was implicated as the etiologic agent of a severe shrimp disease with consequent devastating outcomes to shrimp farming. In both cases, acquisition of genetic material via horizontal transfer provided V. parahaemolyticus with new virulence tools to cause disease. Dissecting the molecular mechanisms of V. parahaemolyticus pathogenesis often requires manipulating its genome. Classically, genetic deletions in V. parahaemolyticus are performed using a laborious, lengthy, multi-step process. Herein, we describe a fast and efficient method to edit this bacterium's genome based on V. parahaemolyticus natural competence. Although this method is similar to one previously described, V. parahaemolyticus requires counter selection for curing of acquired plasmids due to its recalcitrant nature of retaining extrachromosomal DNA. We believe this approach will be of use to the Vibrio community. Importance Spreading of Vibrios throughout the world correlates with increased global temperatures. As they spread, they find new niches to survive, proliferate and invade. Therefore, genetic manipulation of Vibrios is of utmost importance for studying these species. Herein, we have delineated and validated a rapid method to create genetic deletions in Vibrio parahaemolyticus This study provides insightful methodology for studies with other Vibrio species. Copyright © 2018 American Society for Microbiology.

  12. Functional Mobility Testing: A Novel Method to Create Suit Design Requirements

    Science.gov (United States)

    England, Scott A.; Benson, Elizabeth A.; Rajulu, Sudhakar L.

    2008-01-01

    This study was performed to aide in the creation of design requirements for the next generation of space suits that more accurately describe the level of mobility necessary for a suited crewmember through the use of an innovative methodology utilizing functional mobility. A novel method was utilized involving the collection of kinematic data while 20 subjects (10 male, 10 female) performed pertinent functional tasks that will be required of a suited crewmember during various phases of a lunar mission. These tasks were selected based on relevance and criticality from a larger list of tasks that may be carried out by the crew. Kinematic data was processed through Vicon BodyBuilder software to calculate joint angles for the ankle, knee, hip, torso, shoulder, elbow, and wrist. Maximum functional mobility was consistently lower than maximum isolated mobility. This study suggests that conventional methods for establishing design requirements for human-systems interfaces based on maximal isolated joint capabilities may overestimate the required mobility. Additionally, this method provides a valuable means of evaluating systems created from these requirements by comparing the mobility available in a new spacesuit, or the mobility required to use a new piece of hardware, to this newly established database of functional mobility.

  13. The impact of conventional dietary intake data coding methods on foods typically consumed by low-income African-American and White urban populations.

    Science.gov (United States)

    Mason, Marc A; Fanelli Kuczmarski, Marie; Allegro, Deanne; Zonderman, Alan B; Evans, Michele K

    2015-08-01

    Analysing dietary data to capture how individuals typically consume foods is dependent on the coding variables used. Individual foods consumed simultaneously, like coffee with milk, are given codes to identify these combinations. Our literature review revealed a lack of discussion about using combination codes in analysis. The present study identified foods consumed at mealtimes and by race when combination codes were or were not utilized. Duplicate analysis methods were performed on separate data sets. The original data set consisted of all foods reported; each food was coded as if it was consumed individually. The revised data set was derived from the original data set by first isolating coded foods consumed as individual items from those foods consumed simultaneously and assigning a code to designate a combination. Foods assigned a combination code, like pancakes with syrup, were aggregated and associated with a food group, defined by the major food component (i.e. pancakes), and then appended to the isolated coded foods. Healthy Aging in Neighborhoods of Diversity across the Life Span study. African-American and White adults with two dietary recalls (n 2177). Differences existed in lists of foods most frequently consumed by mealtime and race when comparing results based on original and revised data sets. African Americans reported consumption of sausage/luncheon meat and poultry, while ready-to-eat cereals and cakes/doughnuts/pastries were reported by Whites on recalls. Use of combination codes provided more accurate representation of how foods were consumed by populations. This information is beneficial when creating interventions and exploring diet-health relationships.

  14. A Delphi Method Analysis to Create an Emergency Medicine Educational Patient Satisfaction Survey

    Directory of Open Access Journals (Sweden)

    Kory S. London

    2015-12-01

    Full Text Available Introduction: Feedback on patient satisfaction (PS as a means to monitor and improve performance in patient communication is lacking in residency training. A physician’s promotion, compensation and job satisfaction may be impacted by his individual PS scores, once he is in practice. Many communication and satisfaction surveys exist but none focus on the emergency department setting for educational purposes. The goal of this project was to create an emergency medicine-based educational PS survey with strong evidence for content validity. Methods: We used the Delphi Method (DM to obtain expert opinion via an iterative process of surveying. Questions were mined from four PS surveys as well as from group suggestion. The DM analysis determined the structure, content and appropriate use of the tool. The group used four-point Likert-type scales and Lynn’s criteria for content validity to determine relevant questions from the stated goals. Results: Twelve recruited experts participated in a series of seven surveys to achieve consensus. A 10-question, single-page survey with an additional page of qualitative questions and demographic questions was selected. Thirty one questions were judged to be relevant from an original 48-question list. Of these, the final 10 questions were chosen. Response rates for individual survey items was 99.5%. Conclusion: The DM produced a consensus survey with content validity evidence. Future work will be needed to obtain evidence for response process, internal structure and construct validity.

  15. MODEL-ORIENTED METHOD OF DESIGN IMPLEMENTATION WHEN CREATING DIGITAL FILTERS

    Directory of Open Access Journals (Sweden)

    V. Levinskyi

    2016-12-01

    Full Text Available This article discusses the example of model-oriented method of design and development of digital low-pass filters (LPF for automatic control systems (ACS. Typically, high frequency noise and disturbance attenuation is carried out by analogue LPF. However, technical implementation of analogue filters higher than the second order arouse certain difficulties related with the need of precise passive components ratings selection (resistors, capacitors. If the noise and disturbances spectral composition is known, it is possible to build digital LPF with the Nyquist frequency greater than the maximum frequency in the noise spectrum. Such possibility has appeared because of cheap, energy-efficient, high-speed 32-bit microcontrollers market entry. They have analogue signals sampling rate of 30 kHz and above. The traditional approach using the “manual” method of filter parameters calculation, obtaining their recurrence expressions and further program implementation requires high qualification and a lot of time consumption from the developer. An alternative to this approach is the model-oriented method of design (MOMD in MatLab environment when in the one environment the design of digital LPF, verificaton of its performance as a part of the ACS, generation and compilation of program codes for selected microcontroller family take place. MOMD can also be used in the designs of bandpass and bandstop filters for adaptive control systems or systems of technical diagnostics. If during the commissioning or the operation of ACS there is a need in digital LPF parameters change then this operation can be performed within half an hour. MOMD technology allows to significantly reduce the time for developing a specific product without loss of quality in its design ‘cause of extensive possibilities of MatLab development environment.

  16. Fabrication method to create high-aspect ratio pillars for photonic coupling of board level interconnects

    Science.gov (United States)

    Debaes, C.; Van Erps, J.; Karppinen, M.; Hiltunen, J.; Suyal, H.; Last, A.; Lee, M. G.; Karioja, P.; Taghizadeh, M.; Mohr, J.; Thienpont, H.; Glebov, A. L.

    2008-04-01

    An important challenge that remains to date in board level optical interconnects is the coupling between the optical waveguides on printed wiring boards and the packaged optoelectronics chips, which are preferably surface mountable on the boards. One possible solution is the use of Ball Grid Array (BGA) packages. This approach offers a reliable attachment despite the large CTE mismatch between the organic FR4 board and the semiconductor materials. Collimation via micro-lenses is here typically deployed to couple the light vertically from the waveguide substrate to the optoelectronics while allowing for a small misalignment between board and package. In this work, we explore the fabrication issues of an alternative approach in which the vertical photonic connection between board and package is governed by a micro-optical pillar which is attached both to the board substrate and to the optoelectronic chips. Such an approach allows for high density connections and small, high-speed detector footprints while maintaining an acceptable tolerance between board and package. The pillar should exhibit some flexibility and thus a high-aspect ratio is preferred. This work presents and compares different fabrication methods and applies different materials for such high-aspect ratio pillars. The different fabrication methods are: photolithography, direct laser writing and deep proton writing. The selection of optical materials that was investigated is: SU8, Ormocers, PU and a multifunctional acrylate polymer. The resulting optical pillars have diameters ranging from 20um up to 80um, with total heights ranging between 30um and 100um (symbol for micron). The aspect-ratio of the fabricated structures ranges from 1.5 to 5.

  17. The CREATE Method Does Not Result in Greater Gains in Critical Thinking than a More Traditional Method of Analyzing the Primary Literature †

    Science.gov (United States)

    Segura-Totten, Miriam; Dalman, Nancy E.

    2013-01-01

    Analysis of the primary literature in the undergraduate curriculum is associated with gains in student learning. In particular, the CREATE (Consider, Read, Elucidate hypotheses, Analyze and interpret the data, and Think of the next Experiment) method is associated with an increase in student critical thinking skills. We adapted the CREATE method within a required cell biology class and compared the learning gains of students using CREATE to those of students involved in less structured literature discussions. We found that while both sets of students had gains in critical thinking, students who used the CREATE method did not show significant improvement over students engaged in a more traditional method for dissecting the literature. Students also reported similar learning gains for both literature discussion methods. Our study suggests that, at least in our educational context, the CREATE method does not lead to higher learning gains than a less structured way of reading primary literature. PMID:24358379

  18. Typicals/Típicos

    Directory of Open Access Journals (Sweden)

    Silvia Vélez

    2004-01-01

    Full Text Available Typicals is a series of 12 colour photographs digitally created from photojournalistic images from Colombia combined with "typical" craft textiles and text from guest writers. Typicals was first exhibited as photographs 50cm x 75cm in size, each with their own magnifying glass, at the Contemporary Art Space at Gorman House in Canberra, Australia, in 2000. It was then exhibited in "Feedback: Art Social Consciousness and Resistance" at Monash University Museum of Art in Melbourne, Australia, from March to May 2003. From May to June 2003 it was exhibited at the Museo de Arte de la Universidad Nacional de Colombia Santa Fé Bogotá, Colombia. In its current manifestation the artwork has been adapted from the catalogue of the museum exhibitions. It is broken up into eight pieces corresponding to the contributions of the writers. The introduction by Sylvia Vélez is the PDF file accessible via a link below this abstract. The other seven PDF files are accessible via the 'Supplementary Files' section to the left of your screen. Please note that these files are around 4 megabytes each, so it may be difficult to access them from a dial-up connection.

  19. A phantom based method for deriving typical patient doses from measurements of dose-area product on populations of patients

    International Nuclear Information System (INIS)

    Chapple, C.-L.; Broadhead, D.A.

    1995-01-01

    One of the chief sources of uncertainty in the comparison of patient dosimetry data is the influence of patient size on dose. Dose has been shown to relate closely to the equivalent diameter of the patient. This concept has been used to derive a prospective, phantom based method for determining size correction factors for measurements of dose-area product. The derivation of the size correction factor has been demonstrated mathematically, and the appropriate factor determined for a number of different X-ray sets. The use of phantom measurements enables the effect of patient size to be isolated from other factors influencing patient dose. The derived factors agree well with those determined retrospectively from patient dose survey data. Size correction factors have been applied to the results of a large scale patient dose survey, and this approach has been compared with the method of selecting patients according to their weight. For large samples of data, mean dose-area product values are independent of the analysis method used. The chief advantage of using size correction factors is that it allows all patient data to be included in a survey, whereas patient selection has been shown to exclude approximately half of all patients. (author)

  20. Introduction of Behavioral Parameterization in the EPC Calculation Method and Assessment of Five Typical Urban Houses in Wallonia, Belgium

    Directory of Open Access Journals (Sweden)

    Stéphane Monfils

    2016-11-01

    Full Text Available The Energy Performance Certification (EPC of existing residential buildings has been designed to introduce energy efficiency as a comparative criterion for real-estate purchase choices, which should influence real-estate market value and stimulate energy saving investments. EPCs in Belgium are asset ratings, calculated with a standardized approach, which purposefully (and understandably takes the human factor out of the equations in order to allow the comparison of buildings. As a result, they often overestimate energy consumption and present discrepancies that do not allow appropriation of the results by potential buyers. This study proposes complementary EPC results, obtained by integrating the behavior of occupants in the calculation method. This paper first analyses the pool of behavioral uncertainties that influence the results of EPCs, describes a questionnaire built to gather additional data on households’ characteristics and energy consumption habits and proposes modifications to the calculation method. The complementary results are then compared to regulatory EPC results and real consumption data. Though acknowledging the necessity of a standardized EPC for dwellings’ comparison, this study completes it with data on the energy consumption-related behaviors to (partially close the gap between real and theoretical consumptions.

  1. Preparation of regenerable granular carbon nanotubes by a simple heating-filtration method for efficient removal of typical pharmaceuticals

    Science.gov (United States)

    Shan, Danna; Deng, Shubo; Zhao, Tianning; Yu, Gang; Winglee, Judith; Wiesner, Mark R.

    2017-04-01

    A simple and convenient method was used to prepare novel granular carbon nanotubes (CNTs) for enhanced adsorption of pharmaceuticals. By heating CNTs powder at 450 degree centigrade in air, followed by filtration, the obtained granular adsorbent exhibited high surface area and pore volume since the heating process produced some oxygen-containing functional groups on CNT surface, making CNTs more dispersible in the formation of granular cake. The porous granular CNTs not only had more available surfaces for adsorption but also were more easily separated from solution than pristine CNTs (p-CNTs) powder. This adsorbent exhibited relatively fast adsorption for carbamazepine (CBZ), tetracycline (TC) and diclofe- nac sodium (DS), and the maximum adsorption capacity on the granular CNTs was 369.5 μmol/g for CBZ, 284.2 μmol/g for TC and 203.1 μmol/g for DS according to the Langmuir fitting, increasing by 42.4%, 37.8% and 38.0% in comparison with the pristine CNTs powder. Moreover, the spent granular CNTs were successfully regenerated at 400 degree centigrade in air without decreasing the adsorption capacity in five regeneration cycles. The adsorbed CBZ and DS were completely degraded, while the adsorbed TC was partially oxidized and the residual was favorable for the subsequent adsorption. This research develops an easy method to prepare and regenerate granular CNT adsorbent for the enhanced removal of organic pollutants from water or wastewater.

  2. Extension of the method of moments for population balances involving fractional moments and application to a typical agglomeration problem.

    Science.gov (United States)

    Alexiadis, Alessio; Vanni, Marco; Gardin, Pascal

    2004-08-01

    The method of moment (MOM) is a powerful tool for solving population balance. Nevertheless it cannot be used in every circumstance. Sometimes, in fact, it is not possible to write the governing equations in closed form. Higher moments, for instance, could appear in the evolution of the lower ones. This obstacle has often been resolved by prescribing some functional form for the particle size distribution. Another example is the occurrence of fractional moment, usually connected with the presence of fractal aggregates. For this case we propose a procedure that does not need any assumption on the form of the distribution but it is based on the "moments generating function" (that is the Laplace transform of the distribution). An important result of probability theory is that the kth derivative of the moments generating function represents the kth moment of the original distribution. This result concerns integer moments but, taking in account the Weyl fractional derivative, could be extended to fractional orders. Approximating fractional derivative makes it possible to express the fractional moments in terms of the integer ones and so to use regularly the method of moments.

  3. Research on the recycling industry development model for typical exterior plastic components of end-of-life passenger vehicle based on the SWOT method.

    Science.gov (United States)

    Zhang, Hongshen; Chen, Ming

    2013-11-01

    In-depth studies on the recycling of typical automotive exterior plastic parts are significant and beneficial for environmental protection, energy conservation, and sustainable development of China. In the current study, several methods were used to analyze the recycling industry model for typical exterior parts of passenger vehicles in China. The strengths, weaknesses, opportunities, and challenges of the current recycling industry for typical exterior parts of passenger vehicles were analyzed comprehensively based on the SWOT method. The internal factor evaluation matrix and external factor evaluation matrix were used to evaluate the internal and external factors of the recycling industry. The recycling industry was found to respond well to all the factors and it was found to face good developing opportunities. Then, the cross-link strategies analysis for the typical exterior parts of the passenger car industry of China was conducted based on the SWOT analysis strategies and established SWOT matrix. Finally, based on the aforementioned research, the recycling industry model led by automobile manufacturers was promoted. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. fgui: A Method for Automatically Creating Graphical User Interfaces for Command-Line R Packages

    Science.gov (United States)

    Hoffmann, Thomas J.; Laird, Nan M.

    2009-01-01

    The fgui R package is designed for developers of R packages, to help rapidly, and sometimes fully automatically, create a graphical user interface for a command line R package. The interface is built upon the Tcl/Tk graphical interface included in R. The package further facilitates the developer by loading in the help files from the command line functions to provide context sensitive help to the user with no additional effort from the developer. Passing a function as the argument to the routines in the fgui package creates a graphical interface for the function, and further options are available to tweak this interface for those who want more flexibility. PMID:21625291

  5. Two-step method for creating a gastric tube during laparoscopic-thoracoscopic Ivor-Lewis esophagectomy.

    Science.gov (United States)

    Liu, Yu; Li, Ji-Jia; Zu, Peng; Liu, Hong-Xu; Yu, Zhan-Wu; Ren, Yi

    2017-12-07

    To introduce a two-step method for creating a gastric tube during laparoscopic-thoracoscopic Ivor-Lewis esophagectomy and assess its clinical application. One hundred and twenty-two patients with middle or lower esophageal cancer who underwent laparoscopic-thoracoscopic Ivor-Lewis esophagectomy at Liaoning Cancer Hospital and Institute from March 2014 to March 2016 were included in this study, and divided into two groups based on the procedure used for creating a gastric tube. One group used a two-step method for creating a gastric tube, and the other group used the conventional method. The two groups were compared regarding the operating time, surgical complications, and number of stapler cartridges used. The mean operating time was significantly shorter in the two-step method group than in the conventional method group [238 (179-293) min vs 272 (189-347) min, P creating a gastric tube during laparoscopic-thoracoscopic Ivor-Lewis esophagectomy has the advantages of simple operation, minimal damage to the tubular stomach, and reduced use of stapler cartridges.

  6. Creating standards: Creating illusions?

    DEFF Research Database (Denmark)

    Linneberg, Mai Skjøtt

    written standards may open up for the creation of illusions. These are created when written standards' content is not in accordance with the perception standard adopters and standard users have of the specific practice phenomenon's content. This general theoretical argument is exemplified by the specific...

  7. Enhancing Author Information for CERN Document Server: Creating an Author Collection and Using Author Disambiguation Methods

    CERN Document Server

    AUTHOR|(CDS)2096274; Witowski, Sebastian

    Authors are a substantial part of queries in digital libraries, where the results are reflecting the service quality and success. Ambiguous author names can confuse users and cause an inaccurate relation between authorships and individual researchers. Providing a set of disambiguated authors is challenging and related to data integration, since this is done in several ways and by different systems, both manually and automatically. Many disambiguation algorithms have been proposed in the literature, where the most solutions are solving the ambiguities by applying machine learning techniques. However, such problems cannot be solved with an accuracy of 100%. Our contributions to the CERN Document Server presented in this work consists of two parts: first, we create and deploy an author knowledge data base (collection) and second, we link authors of bibliographic records back to their authority records. For the latter, we use a library providing machine learning tools for clustering (where we use trained data fro...

  8. Creating the Data Basis for Environmental Evaluations with the Oil Point Method

    DEFF Research Database (Denmark)

    Bey, Niki; Lenau, Torben Anker

    1999-01-01

    In order to support designers in decision-making, some methods have been developed which are based on environmental indicators. These methods, however, can only be used, if indicators for the specific product concept exist and are readily available.Based on this situation, the authors developed a...

  9. Feasibility of gas-discharge and optical methods of creating artificial ozone layers of the earth

    International Nuclear Information System (INIS)

    Batanov, G.M.; Kossyi, I.A.; Matveev, A.A.; Silakov, V.P.

    1996-01-01

    Gas-discharge (microwave) and optical (laser) methods of generating large-scale artificial ozone layers in the stratosphere are analyzed. A kinetic model is developed to calculate the plasma-chemical consequences of discharges localized in the stratosphere. Computations and simple estimates indicate that, in order to implement gas-discharge and optical methods, the operating power of ozone-producing sources should be comparable to or even much higher than the present-day power production throughout the world. Consequently, from the engineering and economic standpoints, microwave and laser methods cannot be used to repair large-scale ozone 'holes'

  10. Human second trimester amniotic fluid cells are able to create embryoid body-like structures in vitro and to show typical expression profiles of embryonic and primordial germ cells.

    Science.gov (United States)

    Antonucci, Ivana; Di Pietro, Roberta; Alfonsi, Melissa; Centurione, Maria Antonietta; Centurione, Lucia; Sancilio, Silvia; Pelagatti, Francesca; D'Amico, Maria Angela; Di Baldassarre, Angela; Piattelli, Adriano; Tetè, Stefano; Palka, Giandomenico; Borlongan, Cesar V; Stuppia, Liborio

    2014-01-01

    Human amniotic fluid-derived stem cells (AFSCs) represent a novel class of broadly multipotent stem cells sharing characteristics of both embryonic and adult stem cells. However, both the origin of these cells and their actual properties in terms of pluripotent differentiation potential are still debated. In order to verify the presence of features of pluripotency in human second trimester AFSCs, we have investigated the ability of these cells to form in vitro three-dimensional aggregates, known as embryoid bodies (EBs), and to express specific genes of embryonic stem cells (ESCs) and primordial germ cells (PGCs). EBs were obtained after 5 days of AFSC culture in suspension and showed positivity for alkaline phosphatase (AP) staining and for specific markers of pluripotency (OCT4 and SOX2). Moreover, EB-derived cells showed the expression of specific transcripts of the three germ layers. RT-PCR analysis, carried out at different culture times (second, third, fourth, fifth, and eighth passages), revealed the presence of specific markers of ESCs (such as FGF4 and DAPPA4), as well as of markers typical of PGCs and, in particular, genes involved in early stages of germ cell development (Fragilis, Stella, Vasa, c-Kit, Rnf17). Finally, the expression of genes related to the control of DNA methylation (DNMT3A, DNMT3b1, DNMT1, DNMT3L, MBD1, MBD2, MBD3, MDB4, MeCP2), as well as the lack of inactivation of the X-chromosome in female samples, was also demonstrated. Taken together, these data provide further evidence for the presence of common features among human AFSCs, PGCs, and ESCs.

  11. Total motion generated in the unstable cervical spine during management of the typical trauma patient: a comparison of methods in a cadaver model.

    Science.gov (United States)

    Prasarn, Mark L; Horodyski, MaryBeth; Dubose, Dewayne; Small, John; Del Rossi, Gianluca; Zhou, Haitao; Conrad, Bryan P; Rechtine, Glenn R

    2012-05-15

    Biomechanical cadaveric study. We sought to analyze the amount of motion generated in the unstable cervical spine during various maneuvers and transfers that a trauma patient would typically be subjected to prior to definitive fixation, using 2 different protocols. From the time of injury until the spine is adequately stabilized in the operating room, every step in management of the spine-injured patient can result in secondary injury to the spinal cord. The amount of angular motion between C5 and C6, after a surgically created unstable injury, was measured using an electromagnetic motion analysis device (Polhemus Inc., Colchester, VT). A total sequence of maneuvers and transfers was then performed that a patient would be expected to go through from the time of injury until surgical fixation. This included spine board placement and removal, bed transfers, lateral therapy, and turning the patient prone onto the operating table. During each of these, we performed what has been shown to be the best and commonly used (log-roll) techniques. During bed transfers and the turn prone for surgery, there was statistically more angular motion in each plane for traditional transfer with the spine board and manually turning the patient prone as commonly done (P patient from the field to stabilization in the operating room using the best compared with the most commonly used techniques. As previously reported, using log-roll techniques consistently results in unwanted motion at the injured spinal segment.

  12. Comparison of Data Fusion Methods Using Crowdsourced Data in Creating a Hybrid Forest Cover Map

    Directory of Open Access Journals (Sweden)

    Myroslava Lesiv

    2016-03-01

    Full Text Available Data fusion represents a powerful way of integrating individual sources of information to produce a better output than could be achieved by any of the individual sources on their own. This paper focuses on the data fusion of different land cover products derived from remote sensing. In the past, many different methods have been applied, without regard to their relative merit. In this study, we compared some of the most commonly-used methods to develop a hybrid forest cover map by combining available land cover/forest products and crowdsourced data on forest cover obtained through the Geo-Wiki project. The methods include: nearest neighbour, naive Bayes, logistic regression and geographically-weighted logistic regression (GWR, as well as classification and regression trees (CART. We ran the comparison experiments using two data types: presence/absence of forest in a grid cell; percentage of forest cover in a grid cell. In general, there was little difference between the methods. However, GWR was found to perform better than the other tested methods in areas with high disagreement between the inputs.

  13. Creating Rich Portraits: A Mixed-Methods Approach to Understanding Profiles of Intrinsic and Extrinsic Motivations

    Science.gov (United States)

    Corpus, Jennifer Henderlong; Wormington, Stephanie V.; Haimovitz, Kyla

    2016-01-01

    A person-centered, mixed-methods approach (self-report surveys, semistructured interviews, school records) was used to characterize and evaluate profiles of intrinsic and extrinsic motivations among 243 third- through eighth-grade students. Cluster analysis suggested four distinct profiles: high quantity (high intrinsic, high extrinsic), primarily…

  14. Applying terminological methods and description logic for creating and implementing and ontology on inhibition

    DEFF Research Database (Denmark)

    Zambach, Sine; Madsen, Bodil Nistrup

    2009-01-01

    By applying formal terminological methods to model an ontology within the domain of enzyme inhibition, we aim to clarify concepts and to obtain consistency. Additionally, we propose a procedure for implementing this ontology in OWL with the aim of obtaining a strict structure which can form...

  15. Universal Method for Creating Hierarchical Wrinkles on Thin-Film Surfaces.

    Science.gov (United States)

    Jung, Woo-Bin; Cho, Kyeong Min; Lee, Won-Kyu; Odom, Teri W; Jung, Hee-Tae

    2018-01-10

    One of the most interesting topics in physical science and materials science is the creation of complex wrinkled structures on thin-film surfaces because of their several advantages of high surface area, localized strain, and stress tolerance. In this study, a significant step was taken toward solving limitations imposed by the fabrication of previous artificial wrinkles. A universal method for preparing hierarchical three-dimensional wrinkle structures of thin films on a multiple scale (e.g., nanometers to micrometers) by sequential wrinkling with different skin layers was developed. Notably, this method was not limited to specific materials, and it was applicable to fabricating hierarchical wrinkles on all of the thin-film surfaces tested thus far, including those of metals, two-dimensional and one-dimensional materials, and polymers. The hierarchical wrinkles with multiscale structures were prepared by sequential wrinkling, in which a sacrificial layer was used as the additional skin layer between sequences. For example, a hierarchical MoS 2 wrinkle exhibited highly enhanced catalytic behavior because of the superaerophobicity and effective surface area, which are related to topological effects. As the developed method can be adopted to a majority of thin films, it is thought to be a universal method for enhancing the physical properties of various materials.

  16. Method of Creating Micro-scale Silver Telluride Grains Covered with Bismuth Nanoparticles

    Science.gov (United States)

    Kim, Hyun-Jung (Inventor); Choi, Sang Hyouk (Inventor); King, Glen C. (Inventor); Park, Yeonjoon (Inventor); Lee, Kunik (Inventor)

    2014-01-01

    Provided is a method of enhancing thermoelectric performance by surrounding crystalline semiconductors with nanoparticles by contacting a bismuth telluride material with a silver salt under a substantially inert atmosphere and a temperature approximately near the silver salt decomposition temperature; and recovering a metallic bismuth decorated material comprising silver telluride crystal grains.

  17. Creating IRT-Based Parallel Test Forms Using the Genetic Algorithm Method

    Science.gov (United States)

    Sun, Koun-Tem; Chen, Yu-Jen; Tsai, Shu-Yen; Cheng, Chien-Fen

    2008-01-01

    In educational measurement, the construction of parallel test forms is often a combinatorial optimization problem that involves the time-consuming selection of items to construct tests having approximately the same test information functions (TIFs) and constraints. This article proposes a novel method, genetic algorithm (GA), to construct parallel…

  18. Creating Critical Conversations: Investigating the Utility of Socratic Dialogues in Elementary Social Studies Methods

    Science.gov (United States)

    Buchanan, Lisa Brown

    2012-01-01

    This article explores the utility of Socratic dialogues in the elementary social studies methods course. Findings include preservice teachers' behaviors during dialogues, perceived strengths and challenges of using Socratic dialogues in teacher education, and the impact on student learning. Challenges and apprehensions encountered by the teacher…

  19. Reduction in the Number of Comparisons Required to Create Matrix of Expert Judgment in the Comet Method

    Directory of Open Access Journals (Sweden)

    Sałabun Wojciech

    2014-09-01

    Full Text Available Multi-criteria decision-making (MCDM methods are associated with the ranking of alternatives based on expert judgments made using a number of criteria. In the MCDM field, the distance-based approach is one popular method for receiving a final ranking. One of the newest MCDM method, which uses the distance-based approach, is the Characteristic Objects Method (COMET. In this method, the preferences of each alternative are obtained on the basis of the distance from the nearest characteristic ob jects and their values. For this purpose, the domain and fuzzy numbers set for all the considered criteria are determined. The characteristic objects are obtained as the combination of the crisp values of all the fuzzy numbers. The preference values of all the characteristic ob ject are determined based on the tournament method and the principle of indifference. Finally, the fuzzy model is constructed and is used to calculate preference values of the alternatives. In this way, a multi-criteria model is created and it is free of rank reversal phenomenon. In this approach, the matrix of expert judgment is necessary to create. For this purpose, an expert has to compare all the characteristic ob jects with each other. The number of necessary comparisons depends squarely to the number of ob jects. This study proposes the improvement of the COMET method by using the transitivity of pairwise comparisons. Three numerical examples are used to illustrate the efficiency of the proposed improvement with respect to results from the original approach. The proposed improvement reduces significantly the number of necessary comparisons to create the matrix of expert judgment.

  20. A Palladium free method to create a Nickel coated electrode for electrochemical application

    Science.gov (United States)

    Tran, Thien Khanh; Vu, Thanh, Vi; Vo, Minh Xuan

    2018-04-01

    For many generations, the coating of metals provides many applications in the industry: decoration, functional, electroforming. Electroless plating of Nickel with the supports of Palladium/Tin is famous for its properties and effects. In this study, we provide another catalysis solution for the electroless plating process of Nickel. With plastic Polyvinyl Chloride substrate controlled in thickness (2 mm) and scale (200x400 mm), the efficiency of the coating process was carried out under simple lab scale condition. The result of the process is a thin film layer of Nickel coated on the surface of the substrate with exceptional adhesion and strong physical properties also. The product sample then was tested by many methods such as SEM, XRD, EDS, and FTIR to clarify its properties. According to our observation and the result we obtained, we believe there is still more room for improvement to this method, and a further investigation on its application as well can be carried on in the future.

  1. Optical methods for creating delivery systems of chemical compounds to plant roots

    Science.gov (United States)

    Kuznetsov, Pavel E.; Rogacheva, Svetlana M.; Arefeva, Oksana A.; Minin, Dmitryi V.; Tolmachev, Sergey A.; Kupadze, Machammad S.

    2004-08-01

    Spectrophotometric and fluorescence methods have been used for creation and investigation of various systems of target delivery of chemical compounds to roots of plants. The possibility of using liposomes, incrusted by polysaccharides of the external surface of nitrogen-fixing rizospheric bacteria Azospirillum brasilense SP 245, and nanoparticles incrusted by polysaccharides of wheat roots, as the named systems has been shown. The important role of polysaccharide-polysaccharide interaction in the adsorption processes of bacteria on wheat roots has been demonstrated.

  2. The Soft-Confined Method for Creating Molecular Models of Amorphous Polymer Surfaces

    KAUST Repository

    Liu, Hongyi; Li, Yan; Krause, Wendy E.; Rojas, Orlando J.; Pasquinelli, Melissa A.

    2012-01-01

    The goal of this work was to use molecular dynamics (MD) simulations to build amorphous surface layers of polypropylene (PP) and cellulose and to inspect their physical and interfacial properties. A new method to produce molecular models for these surfaces was developed, which involved the use of a "soft" confining layer comprised of a xenon crystal. This method compacts the polymers into a density distribution and a degree of molecular surface roughness that corresponds well to experimental values. In addition, calculated properties such as density, cohesive energy density, coefficient of thermal expansion, and the surface energy agree with experimental values and thus validate the use of soft confining layers. The method can be applied to polymers with a linear backbone such as PP as well as those whose backbones contain rings, such as cellulose. The developed PP and cellulose surfaces were characterized by their interactions with water. It was found that a water nanodroplet spreads on the amorphous cellulose surfaces, but there was no significant change in the dimension of the droplet on the PP surface; the resulting MD water contact angles on PP and amorphous cellulose surfaces were determined to be 106 and 33°, respectively. © 2012 American Chemical Society.

  3. The Soft-Confined Method for Creating Molecular Models of Amorphous Polymer Surfaces

    KAUST Repository

    Liu, Hongyi

    2012-02-09

    The goal of this work was to use molecular dynamics (MD) simulations to build amorphous surface layers of polypropylene (PP) and cellulose and to inspect their physical and interfacial properties. A new method to produce molecular models for these surfaces was developed, which involved the use of a "soft" confining layer comprised of a xenon crystal. This method compacts the polymers into a density distribution and a degree of molecular surface roughness that corresponds well to experimental values. In addition, calculated properties such as density, cohesive energy density, coefficient of thermal expansion, and the surface energy agree with experimental values and thus validate the use of soft confining layers. The method can be applied to polymers with a linear backbone such as PP as well as those whose backbones contain rings, such as cellulose. The developed PP and cellulose surfaces were characterized by their interactions with water. It was found that a water nanodroplet spreads on the amorphous cellulose surfaces, but there was no significant change in the dimension of the droplet on the PP surface; the resulting MD water contact angles on PP and amorphous cellulose surfaces were determined to be 106 and 33°, respectively. © 2012 American Chemical Society.

  4. Bosch-like method for creating high aspect ratio poly(methyl methacrylate) (PMMA) structures

    KAUST Repository

    Haiducu, Marius

    2012-02-02

    This paper presents a method for etching millimetre-deep trenches in commercial grade PMMA using deep-UV at 254 nm. The method is based on consecutive cycles of irradiation and development of the exposed areas, respectively. The exposure segment is performed using an inexpensive, in-house built irradiation box while the development part is accomplished using an isopropyl alcohol (IPA):H2O developer. The method was tested and characterized by etching various dimension square test structures in commercial grade, mirrored acrylic. The undercut of the sidewalls due to the uncollimated nature of the irradiation light was dramatically alleviated by using a honeycomb metallic grid in between the irradiation source and the acrylic substrate and by rotating the latter using a direct current (DC) motor-driven stage. By using an extremely affordable set-up and non-toxic, environmentally friendly materials and substances, this process represents an excellent alternative to microfabricating microfluidic devices in particular and high aspect ratio structures in general using PMMA as substrate. © 2012 SPIE.

  5. Total motion generated in the unstable thoracolumbar spine during management of the typical trauma patient: a comparison of methods in a cadaver model.

    Science.gov (United States)

    Prasarn, Mark L; Zhou, Haitao; Dubose, Dewayne; Rossi, Gianluca Del; Conrad, Bryan P; Horodyski, Marybeth; Rechtine, Glenn R

    2012-05-01

    The proper prehospital and inpatient management of patients with unstable spinal injuries is critical for prevention of secondary neurological compromise. The authors sought to analyze the amount of motion generated in the unstable thoracolumbar spine during various maneuvers and transfers that a trauma patient would typically be subjected to prior to definitive fixation. Five fresh cadavers with surgically created unstable L-1 burst fractures were tested. The amount of angular motion between the T-12 and L-2 vertebral segments was measured using a 3D electromagnetic motion analysis device. A complete sequence of maneuvers and transfers was then performed that a patient would be expected to go through from the time of injury until surgical fixation. These maneuvers and transfers included spine board placement and removal, bed transfers, lateral therapy, and turning the patient prone onto the operating table. During each of these, the authors performed what they believed to be the most commonly used versus the best techniques for preventing undesirable motion at the injury level. When placing a spine board there was more motion in all 3 planes with the log-roll technique, and this difference reached statistical significance for axial rotation (p = 0.018) and lateral bending (p = 0.003). Using logrolling for spine board removal resulted in increased motion again, and this was statistically significant for flexion-extension (p = 0.014). During the bed transfer and lateral therapy, the log-roll technique resulted in more motion in all 3 planes (p ≤ 0.05). When turning the cadavers prone for surgery there was statistically more angular motion in each plane for manually turning the patient versus the Jackson table turn (p ≤ 0.01). The total motion was decreased by almost 50% in each plane when using an alternative to the log-roll techniques during the complete sequence (p ≤ 0.007). Although it is unknown how much motion in the unstable spine is necessary to cause

  6. Creating a spatially-explicit index: a method for assessing the global wildfire-water risk

    Science.gov (United States)

    Robinne, François-Nicolas; Parisien, Marc-André; Flannigan, Mike; Miller, Carol; Bladon, Kevin D.

    2017-04-01

    The wildfire-water risk (WWR) has been defined as the potential for wildfires to adversely affect water resources that are important for downstream ecosystems and human water needs for adequate water quantity and quality, therefore compromising the security of their water supply. While tools and methods are numerous for watershed-scale risk analysis, the development of a toolbox for the large-scale evaluation of the wildfire risk to water security has only started recently. In order to provide managers and policy-makers with an adequate tool, we implemented a method for the spatial analysis of the global WWR based on the Driving forces-Pressures-States-Impacts-Responses (DPSIR) framework. This framework relies on the cause-and-effect relationships existing between the five categories of the DPSIR chain. As this approach heavily relies on data, we gathered an extensive set of spatial indicators relevant to fire-induced hydrological hazards and water consumption patterns by human and natural communities. When appropriate, we applied a hydrological routing function to our indicators in order to simulate downstream accumulation of potentially harmful material. Each indicator was then assigned a DPSIR category. We collapsed the information in each category using a principal component analysis in order to extract the most relevant pixel-based information provided by each spatial indicator. Finally, we compiled our five categories using an additive indexation process to produce a spatially-explicit index of the WWR. A thorough sensitivity analysis has been performed in order to understand the relationship between the final risk values and the spatial pattern of each category used during the indexation. For comparison purposes, we aggregated index scores by global hydrological regions, or hydrobelts, to get a sense of regional DPSIR specificities. This rather simple method does not necessitate the use of complex physical models and provides a scalable and efficient tool

  7. TECHNOLOGY AND METHODS OF CREATING WEB-BASED LEARNING ENVIRONMENT FOR HUMANITIES EDUCATION

    Directory of Open Access Journals (Sweden)

    Вилена Александровна Брылева

    2013-04-01

    Full Text Available The purpose of the article is to describe the structure of web environment in frames of new educational paradigm in teaching Humanities, to clarify the scientifical and practical importance of using Web 2.0 technologies in higher education. This problem is of great importance due to the necessity of integration of modern IT into educational environment which needs to develop new methods of teaching.The model of educational environment presented in the article is based on the integration of LMS Moodle and PLE Mahara. The authors define the functional modules and means of the environment, describe its didactic qualities, organization requirements and usage advantages. The methodic model of teaching English worked out by the authors supposes step-by-step formation of professional as well as informational competence necessary to any modern specialist. The effectiveness of the model is verified by experiental learning, based on individual and group forms of work on educational site of Institute of Philology and Intercultural Communication of Volgograd State university.DOI: http://dx.doi.org/10.12731/2218-7405-2013-2-8

  8. An improvement of estimation method of source term to the environment for interfacing system LOCA for typical PWR using MELCOR code

    Energy Technology Data Exchange (ETDEWEB)

    Han, Seok Jung; Kim, Tae Woon; Ahn, Kwang Il [Risk and Environmental Safety Research Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2017-06-15

    Interfacing-system loss-of-coolant-accident (ISLOCA) has been identified as the most hazardous accident scenario in the typical PWR plants. The present study as an effort to improve the knowledge of the source term to the environment during ISLOCA focuses on an improvement of the estimation method. The improvement was performed to take into account an effect of broken pipeline and auxiliary building structures relevant to ISLOCA. An estimation of the source term to the environment was for the OPR-1000 plants by MELOCR code version 1.8.6. The key features of the source term showed that the massive amount of fission products departed from the beginning of core degradation to the vessel breach. The release amount of fission products may be affected by the broken pipeline and the auxiliary building structure associated with release pathway.

  9. Method For Creating Corrosion Resistant Surface On An Aluminum Copper Alloy

    Science.gov (United States)

    Mansfeld, Florian B.; Wang, You; Lin, Simon H.

    1997-06-03

    A method for treating the surface of aluminum alloys hang a relatively high copper content is provided which includes the steps of removing substantially all of the copper from the surface, contacting the surface with a first solution containing cerium, electrically charging the surface while contacting the surface in an aqueous molybdate solution, and contacting the surface with a second solution containing cerium. The copper is substantially removed from the surface in the first step either by (i) contacting the surface with an acidic chromate solution or by (ii) contacting the surface with an acidic nitrate solution while subjecting the surface to an electric potential. The corrosion-resistant surface resulting from the invention is excellent, consistent and uniform throughout the surface. Surfaces treated by the invention may often be certified for use in salt-water services.

  10. Going to the source: creating a citizenship outcome measure by community-based participatory research methods.

    Science.gov (United States)

    Rowe, Michael; Clayton, Ashley; Benedict, Patricia; Bellamy, Chyrell; Antunes, Kimberly; Miller, Rebecca; Pelletier, Jean-Francois; Stern, Erica; O'Connell, Maria J

    2012-01-01

    This study used participatory methods and concept-mapping techniques to develop a greater understanding of the construct of citizenship and an instrument to assess the degree to which individuals, particularly those with psychiatric disorders, perceive themselves to be citizens in a multifaceted sense (that is, not in a simply legal sense). Participants were persons with recent experience of receiving public mental health services, having criminal justice charges, having a serious general medical illness, or having more than one of these "life disruptions," along with persons who had not experienced any of these disruptions. Community-based participatory methods, including a co-researcher team of persons with experiences of mental illness and other life disruptions, were employed. Procedures included conducting focus groups with each life disruption (or no disruption) group to generate statements about the meaning of citizenship (N = 75 participants); reducing the generated statements to 100 items and holding concept-mapping sessions with participants from the five stakeholder groups (N = 66 participants) to categorize and rate each item in terms of importance and access; analyzing concept-mapping data to produce citizenship domains; and developing a pilot instrument of citizenship. Multidimensional scaling and hierarchical cluster analysis revealed seven primary domains of citizenship: personal responsibilities, government and infrastructure, caring for self and others, civil rights, legal rights, choices, and world stewardship. Forty-six items were identified for inclusion in the citizenship measure. Citizenship is a multidimensional construct encompassing the degree to which individuals with different life experiences perceive inclusion or involvement across a variety of activities and concepts.

  11. Method for reducing excess heat supply experienced in typical Chinese district heating systems by achieving hydraulic balance and improving indoor air temperature control at the building level

    International Nuclear Information System (INIS)

    Zhang, Lipeng; Gudmundsson, Oddgeir; Thorsen, Jan Eric; Li, Hongwei; Li, Xiaopeng; Svendsen, Svend

    2016-01-01

    A common problem with Chinese district heating systems is that they supply more heat than the actual heat demand. The reason for this excess heat supply is the general failure to use control devices to adjust the indoor temperature and flow in the building heating systems in accordance with the actual heat demand. This results in 15–30% of the total supplied heat being lost. This paper proposes an integrated approach that aims to reduce the excess heat loss by introducing pre-set thermostatic radiator valves combined with automatic balancing valves. Those devices establish hydraulic balance, and stabilize indoor temperatures. The feasibility and the energy consumption reduction of this approach were verified by means of simulation and a field test. By moving the system from centrally planned heat delivery to demand-driven heat delivery, excess heat loss can be significantly reduced. Results show that once the hydraulic balance is achieved and indoor temperatures are controlled with this integrated approach, 17% heat savings and 42.8% pump electricity savings can be achieved. The energy savings will also have a positive environmental effect with seasonal reductions of 11 kg CO_2, 0.1 kg SO_2, and 0.03 kg NO_x per heating square meter for a typical case in Harbin. - Highlights: • Two real cases reflect the temperature and flow control situation of heating systems in China. • Pre-set radiator valves with automatic balancing valves create dynamic hydraulic balance. • IDA-ICE simulation shows 17% heat saving and 48% pump electricity saving. • This approach can improve the comfort level of multi-storey/high-rise residential buildings. • This approach can reduce excess heat supply and bring out positive environmental impacts.

  12. A rapid method for creating qualitative images indicative of thick oil emulsion on the ocean's surface from imaging spectrometer data

    Science.gov (United States)

    Kokaly, Raymond F.; Hoefen, Todd M.; Livo, K. Eric; Swayze, Gregg A.; Leifer, Ira; McCubbin, Ian B.; Eastwood, Michael L.; Green, Robert O.; Lundeen, Sarah R.; Sarture, Charles M.; Steele, Denis; Ryan, Thomas; Bradley, Eliza S.; Roberts, Dar A.; ,

    2010-01-01

    This report describes a method to create color-composite images indicative of thick oil:water emulsions on the surface of clear, deep ocean water by using normalized difference ratios derived from remotely sensed data collected by an imaging spectrometer. The spectral bands used in the normalized difference ratios are located in wavelength regions where the spectra of thick oil:water emulsions on the ocean's surface have a distinct shape compared to clear water and clouds. In contrast to quantitative analyses, which require rigorous conversion to reflectance, the method described is easily computed and can be applied rapidly to radiance data or data that have been atmospherically corrected or ground-calibrated to reflectance. Examples are shown of the method applied to Airborne Visible/Infrared Imaging Spectrometer data collected May 17 and May 19, 2010, over the oil spill from the Deepwater Horizon offshore oil drilling platform in the Gulf of Mexico.

  13. Investigating hydrogen peroxide in rainwater of a typical midsized city in tropical Brazil using a novel application of a fluorometric method

    Science.gov (United States)

    Scaramboni, C.; Crispim, C. P.; Toledo, J. C.; Campos, M. L. A. M.

    2018-03-01

    This work investigates the effect of public policies related to vehicle emissions on the lower tropospheric concentrations of H2O2 in a typical midsized city in tropical Brazil. The concentrations of H2O2, SO42-, and NO3- in rainwater samples were determined from 2014 to 2017 in the municipality of Ribeirão Preto in São Paulo State. A fluorometric method, based on the formation of a highly fluorescent product (2‧,7‧-dichlorofluorescein, DCF), was adapted and optimized for the measurement of H2O2 in natural water samples including seawater. The method was highly specific, accurate and sensitive (LOD = 2 nmol L-1). Its main advantage compared to others, was that the fluorophore remained stable for at least 48 h, offering a longer time interval in which to perform the analysis and therefore facilitating fieldwork. Concentrations of H2O2 in rainwater ranged from 5.8 to 96 μmol L-1, with VWM of 28.6 ± 1.4 μmol L-1 (n = 77). Solar radiation appeared to have a greater impact on production than on consumption of H2O2. The annual VWM concentrations of H2O2 in rainwater were negatively correlated with sulfate (at pH important factors affecting the concentration of H2O2 in the atmosphere. This work expands the current records available for the Southern Hemisphere, where there is a considerable paucity of information regarding temporal production and loss of atmospheric H2O2.

  14. Inkjet printing of Chitlac-nanosilver—a method to create functional coatings for non-metallic bone implants

    International Nuclear Information System (INIS)

    Nganga, Sara; Moritz, Niko; Jakobsson, Kristina; Vallittu, Pekka K; Kolakovic, Ruzica; Nyman, Johan O; Sandler, Niklas; Borgogna, Massimiliano; Travan, Andrea; Donati, Ivan; Crosera, Matteo

    2014-01-01

    Biostable fiber-reinforced composites, based on bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate thermoset polymer matrix reinforced with E-glass fibers have been successfully used in cranial reconstructions and the material has been approved for clinical use. As a further refinement of these implants, antimicrobial, non-cytotoxic coatings on the composites were created by an immersion procedure driven by strong electrostatic interactions. Silver nanoparticles (nAg) were immobilized in lactose-modified chitosan (Chitlac) to prepare the bacteriostatic coatings. Herein, we report the use of inkjet technology (a drop-on-demand inkjet printer) to deposit functional Chitlac-nAg coatings on the thermoset substrates. Characterization methods included scanning electron microscopy, scanning white light interferometry and electro-thermal atomic absorption spectroscopy. Inkjet printing enabled the fast and flexible functionalization of the thermoset surfaces with controlled coating patterns. The coatings were not impaired by the printing process: the kinetics of silver release from the coatings created by inkjet printing and conventional immersion technique was similar. Further research is foreseen to optimize printing parameters and to tailor the characteristics of the coatings for specific clinical applications. (note)

  15. Inkjet printing of Chitlac-nanosilver--a method to create functional coatings for non-metallic bone implants.

    Science.gov (United States)

    Nganga, Sara; Moritz, Niko; Kolakovic, Ruzica; Jakobsson, Kristina; Nyman, Johan O; Borgogna, Massimiliano; Travan, Andrea; Crosera, Matteo; Donati, Ivan; Vallittu, Pekka K; Sandler, Niklas

    2014-10-22

    Biostable fiber-reinforced composites, based on bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate thermoset polymer matrix reinforced with E-glass fibers have been successfully used in cranial reconstructions and the material has been approved for clinical use. As a further refinement of these implants, antimicrobial, non-cytotoxic coatings on the composites were created by an immersion procedure driven by strong electrostatic interactions. Silver nanoparticles (nAg) were immobilized in lactose-modified chitosan (Chitlac) to prepare the bacteriostatic coatings. Herein, we report the use of inkjet technology (a drop-on-demand inkjet printer) to deposit functional Chitlac-nAg coatings on the thermoset substrates. Characterization methods included scanning electron microscopy, scanning white light interferometry and electro-thermal atomic absorption spectroscopy. Inkjet printing enabled the fast and flexible functionalization of the thermoset surfaces with controlled coating patterns. The coatings were not impaired by the printing process: the kinetics of silver release from the coatings created by inkjet printing and conventional immersion technique was similar. Further research is foreseen to optimize printing parameters and to tailor the characteristics of the coatings for specific clinical applications.

  16. The pointillism method for creating stimuli suitable for use in computer-based visual contrast sensitivity testing.

    Science.gov (United States)

    Turner, Travis H

    2005-03-30

    An increasingly large corpus of clinical and experimental neuropsychological research has demonstrated the utility of measuring visual contrast sensitivity. Unfortunately, existing means of measuring contrast sensitivity can be prohibitively expensive, difficult to standardize, or lack reliability. Additionally, most existing tests do not allow full control over important characteristics, such as off-angle rotations, waveform, contrast, and spatial frequency. Ideally, researchers could manipulate characteristics and display stimuli in a computerized task designed to meet experimental needs. Thus far, 256-bit color limitation in standard cathode ray tube (CRT) monitors has been preclusive. To this end, the pointillism method (PM) was developed. Using MATLAB software, stimuli are created based on both mathematical and stochastic components, such that differences in regional luminance values of the gradient field closely approximate the desired contrast. This paper describes the method and examines its performance in sine and square-wave image sets from a range of contrast values. Results suggest the utility of the method for most experimental applications. Weaknesses in the current version, the need for validation and reliability studies, and considerations regarding applications are discussed. Syntax for the program is provided in an appendix, and a version of the program independent of MATLAB is available from the author.

  17. Is our Universe typical?

    International Nuclear Information System (INIS)

    Gurzadyan, V.G.

    1988-01-01

    The problem of typicalness of the Universe - as a dynamical system possessing both regular and chaotic regions of positive measure of phase space, is raised and discussed. Two dynamical systems are considered: 1) The observed Universe as a hierarchy of systems of N graviting bodies; 2) (3+1)-manifold with matter evolving to Wheeler-DeWitt equation in superspace with Hawking boundary condition of compact metrics. It is shown that the observed Universe is typical. There is no unambiguous answer for the second system yet. If it is typical too then the same present state of the Universe could have been originated from an infinite number of different initial conditions the restoration of which is practically impossible at present. 35 refs.; 2 refs

  18. Studies of the subsurface zone created in aluminium and its alloys by means of positron annihilation and complementary methods

    International Nuclear Information System (INIS)

    Dryzek, E.

    2008-01-01

    There are presented the results of the studies of the subsurface zone created in aluminium and its alloys during sliding or other surface modification treatments. The application of the positron annihilation techniques due to their high sensitivity to crystal lattice defects enabled to determine defects profiles in the subsurface zone. The positron annihilation studies were correlated with other conventional measurements applied in tribology, i.e. microhardness measurements, scanning electron microscopy, X-ray diffraction and in a special case stress distribution calculated theoretically. It was shown that the positron annihilation spectroscopy is a useful tool for profiling of the subsurface zone created during sliding even for light metals their alloys and composites. The total range of the subsurface zone detected by the positron annihilation extends from 50 μm to 450 μm depending on the material studied and surface modification treatment. Additionally, the type of the main defects can be determined. The studies of the pure aluminium samples after dry sliding enabled to find the defect concentration of vacancy type in the depth less then 1 μm and to correlate its value with the size of crystallites. It supports the conclusion on recovery processes taking place in this layer. There was made the attempt to apply the Doppler broadening coincidence spectroscopy to the studies of aluminium alloy and composite. In view of the interdisciplinary character the present thesis enclose also the review of the basic issues of tribology, measurement methods applied to the subsurface zone studies and positron annihilation experimental techniques. (author)

  19. An Efficient Method to Create Digital Terrain Models from Point Clouds Collected by Mobile LiDAR Systems

    Science.gov (United States)

    Gézero, L.; Antunes, C.

    2017-05-01

    The digital terrain models (DTM) assume an essential role in all types of road maintenance, water supply and sanitation projects. The demand of such information is more significant in developing countries, where the lack of infrastructures is higher. In recent years, the use of Mobile LiDAR Systems (MLS) proved to be a very efficient technique in the acquisition of precise and dense point clouds. These point clouds can be a solution to obtain the data for the production of DTM in remote areas, due mainly to the safety, precision, speed of acquisition and the detail of the information gathered. However, the point clouds filtering and algorithms to separate "terrain points" from "no terrain points", quickly and consistently, remain a challenge that has caught the interest of researchers. This work presents a method to create the DTM from point clouds collected by MLS. The method is based in two interactive steps. The first step of the process allows reducing the cloud point to a set of points that represent the terrain's shape, being the distance between points inversely proportional to the terrain variation. The second step is based on the Delaunay triangulation of the points resulting from the first step. The achieved results encourage a wider use of this technology as a solution for large scale DTM production in remote areas.

  20. Typical Complexity Numbers

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Typical Complexity Numbers. Say. 1000 tones,; 100 Users,; Transmission every 10 msec. Full Crosstalk cancellation would require. Full cancellation requires a matrix multiplication of order 100*100 for all the tones. 1000*100*100*100 operations every second for the ...

  1. Typicality and reasoning fallacies.

    Science.gov (United States)

    Shafir, E B; Smith, E E; Osherson, D N

    1990-05-01

    The work of Tversky and Kahneman on intuitive probability judgment leads to the following prediction: The judged probability that an instance belongs to a category is an increasing function of the typicality of the instance in the category. To test this prediction, subjects in Experiment 1 read a description of a person (e.g., "Linda is 31, bright, ... outspoken") followed by a category. Some subjects rated how typical the person was of the category, while others rated the probability that the person belonged to that category. For categories like bank teller and feminist bank teller: (1) subjects rated the person as more typical of the conjunctive category (a conjunction effect); (2) subjects rated it more probable that the person belonged to the conjunctive category (a conjunction fallacy); and (3) the magnitudes of the conjunction effect and fallacy were highly correlated. Experiment 2 documents an inclusion fallacy, wherein subjects judge, for example, "All bank tellers are conservative" to be more probable than "All feminist bank tellers are conservative." In Experiment 3, results parallel to those of Experiment 1 were obtained with respect to the inclusion fallacy.

  2. Methods for Creating and Animating a Computer Model Depicting the Structure and Function of the Sarcoplasmic Reticulum Calcium ATPase Enzyme.

    Science.gov (United States)

    Chen, Alice Y.; McKee, Nancy

    1999-01-01

    Describes the developmental process used to visualize the calcium ATPase enzyme of the sarcoplasmic reticulum which involves evaluating scientific information, consulting scientists, model making, storyboarding, and creating and editing in a computer medium. (Author/CCM)

  3. Evaluation of different methods of optical impression making on the marginal gap of onlays created with CEREC 3D.

    Science.gov (United States)

    da Costa, Juliana B; Pelogia, Fernanda; Hagedorn, Bradley; Ferracane, Jack L

    2010-01-01

    This study evaluated the marginal gaps on several surfaces of onlays created with the Cerec 3D system using one intraoral and two extraoral optical impression methods. A human molar (#19) was mounted with its adjacent teeth on a typodont (Frasaco) and prepared for a MODL onlay. The typodont was assembled in the mannequin head in order to simulate clinical conditions. The same operator took 36 individual optical impressions using a CEREC 3D camera. For group 1 (IP), a thin layer of titanium dioxide powder (CEREC powder-VITA) was applied directly onto the surface of the preparation for imaging (n = 12). For group 2 (EP), a sectional impression was taken with hydrocolloid Identic Syringable (Dux Dental), a die made with polyvinylsiloxane KwikkModel Scan (R-dental Dentalerzeugnisse GmbH) and powdered with titanium dioxide for imaging (n = 12). For group 3 (ES), a sectional impression was taken with PVS and a sectional stock tray, a die fabricated in stone (Diamond die- HI-TEC Dental Products) and the die being imaged without powdering (n = 12). One operator designed and machined the onlays in VitaBlocks Mark II for Cerec (VITA) using a CEREC 3D. The marginal gaps (microm) were measured with an optical microscope (50x) at 12 points, three on each surface of the MODL. The results were analyzed by two-way ANOVA/ Tukey's (p = 0.05). The overall mean marginal gaps (microm) for the three methods were: IP = 111.6 (+/- 34.0); EP = 161.4 (+/- 37.6) and ES = 116.8 (+/- 42.3). IP and ES were equal, but both were significantly less than EP. The pooled mean marginal gaps (microm) for the occlusal = 110.5 (+/- 39) and lingual = 111.5 (+/- 30.5) surfaces were equivalent and significantly less than the distal = 136.5 (+/- 42.5) and mesial = 161.1 (+/- 43.3). The marginal gap of CEREC 3D onlay restorations was not different when the optical impression was taken intraorally vs extraorally using a stone cast that does not require powdering. The lingual and occlusal surfaces showed the

  4. Not all coping strategies are created equal: a mixed methods study exploring physicians' self reported coping strategies

    Directory of Open Access Journals (Sweden)

    Wallace Jean E

    2010-07-01

    Full Text Available Abstract Background Physicians experience workplace stress and draw on different coping strategies. The primary goal of this paper is to use interview data to explore physicians' self reported coping strategies. In addition, questionnaire data is utilized to explore the degree to which the coping strategies are used and are associated with feelings of emotional exhaustion, a key symptom of burnout. Methods This mixed methods study explores factors related to physician wellness within a large health region in Western Canada. This paper focuses on the coping strategies that physicians use in response to work-related stress. The qualitative component explores physicians' self reported coping strategies through open ended interviews of 42 physicians representing diverse medical specialties and settings (91% response rate. The major themes extracted from the qualitative interviews were used to construct 12 survey items that were included in the comprehensive quantitative questionnaire. Questionnaires were sent to all eligible physicians in the health region with 1178 completed surveys (40% response rate. Questionnaire items were used to measure how often physicians draw on the various coping strategies. Feelings of burnout were also measured in the survey by 5 items from the Emotional Exhaustion subscale of the revised Maslach Burnout Inventory. Results Major themes identified from the interviews include coping strategies used at work (e.g., working through stress, talking with co-workers, taking a time out, using humor and after work (e.g., exercise, quiet time, spending time with family. Analysis of the questionnaire data showed three often used workplace coping strategies were positively correlated with feeling emotionally exhausted (i.e., keeping stress to oneself (r = .23, concentrating on what to do next (r = .16, and going on as if nothing happened (r = .07. Some less often used workplace coping strategies (e.g., taking a time out and all

  5. A Typical Synergy

    Science.gov (United States)

    van Noort, Thomas; Achten, Peter; Plasmeijer, Rinus

    We present a typical synergy between dynamic types (dynamics) and generalised algebraic datatypes (GADTs). The former provides a clean approach to integrating dynamic typing in a statically typed language. It allows values to be wrapped together with their type in a uniform package, deferring type unification until run time using a pattern match annotated with the desired type. The latter allows for the explicit specification of constructor types, as to enforce their structural validity. In contrast to ADTs, GADTs are heterogeneous structures since each constructor type is implicitly universally quantified. Unfortunately, pattern matching only enforces structural validity and does not provide instantiation information on polymorphic types. Consequently, functions that manipulate such values, such as a type-safe update function, are cumbersome due to boilerplate type representation administration. In this paper we focus on improving such functions by providing a new GADT annotation via a natural synergy with dynamics. We formally define the semantics of the annotation and touch on novel other applications of this technique such as type dispatching and enforcing type equality invariants on GADT values.

  6. LHC Create

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    LHC Create is an upcoming 2-day workshop held at IdeaSquare in November. Participants from CERN and IPAC school of design will compete to design an exhibit that explains why CERN does what it does. The winner will have their exhibit fully realised and made available to experiments, institutes, and tourism agencies around the world.

  7. Creating Poetry.

    Science.gov (United States)

    Drury, John

    Encouraging exploration and practice, this book offers hundreds of exercises and numerous tips covering every step involved in creating poetry. Each chapter is a self-contained unit offering an overview of material in the chapter, a definition of terms, and poetry examples from well-known authors designed to supplement the numerous exercises.…

  8. How typical are 'typical' tremor characteristics? : Sensitivity and specificity of five tremor phenomena

    NARCIS (Netherlands)

    van der Stouwe, A. M. M.; Elting, J. W.; van der Hoeven, J. H.; van Laar, T.; Leenders, K. L.; Maurits, N. M.; Tijssen, M. Aj.

    Introduction: Distinguishing between different tremor disorders can be challenging. Some tremor disorders are thought to have typical tremor characteristics: the current study aims to provide sensitivity and specificity for five 'typical' tremor phenomena. Methods: Retrospectively, we examined 210

  9. A New Approach of Asymmetric Homoclinic and Heteroclinic Orbits Construction in Several Typical Systems Based on the Undetermined Padé Approximation Method

    Directory of Open Access Journals (Sweden)

    Jingjing Feng

    2016-01-01

    Full Text Available In dynamic systems, some nonlinearities generate special connection problems of non-Z2 symmetric homoclinic and heteroclinic orbits. Such orbits are important for analyzing problems of global bifurcation and chaos. In this paper, a general analytical method, based on the undetermined Padé approximation method, is proposed to construct non-Z2 symmetric homoclinic and heteroclinic orbits which are affected by nonlinearity factors. Geometric and symmetrical characteristics of non-Z2 heteroclinic orbits are analyzed in detail. An undetermined frequency coefficient and a corresponding new analytic expression are introduced to improve the accuracy of the orbit trajectory. The proposed method shows high precision results for the Nagumo system (one single orbit; general types of non-Z2 symmetric nonlinear quintic systems (orbit with one cusp; and Z2 symmetric system with high-order nonlinear terms (orbit with two cusps. Finally, numerical simulations are used to verify the techniques and demonstrate the enhanced efficiency and precision of the proposed method.

  10. A simple method for measuring sex-hormone binding protein (SHBP) - typical values in men and women and in pregnant women

    International Nuclear Information System (INIS)

    Tafurt, C.A.; Estrada, R. de

    1978-01-01

    Assuming that the binding forces between steroid hormones and their binding proteins are similar to those between antigens and their antibodies, the authors describe how to determine SHBP activity by a dilution method analogous to that used for titration of antisera in radioimmunoassay. The method consists of the following stages: (1) plasma dilution; (2) incubation of the dilution with 20,000dis/min of 1,2- 3 H-testosterone; (3) separation of the fraction of tracer bound to the SHBP by precipitation with ammonium sulphate; (4) centrifugation and measurement of the supernatant; and (5) plotting of the results on a graph where the axis of ordinates represents the quotient given by bound steroid over free steroid (U/L) and the abscissa represents the plasma dilutions. The values are expressed as the 50% bound titre. An advantage of the method is the higher sensitivity of the dilution curves in the steepest part where the 50% bound is encountered; it is thus not necessary to use the saturation part of the curves where sensitivity is lost owing to the steeper slope. A further advantage of the method is that there is no need for costly processes such as dialysis. The SHBP values obtained for healthy subjects were as follows: 1/5 for men, 1/93 for women, and 1/360 in pregnant women. These physiological values showed no overlapping. (author)

  11. Simplified method for creating a density-absorbed dose calibration curve for the low dose range from Gafchromic EBT3 film

    Directory of Open Access Journals (Sweden)

    Tatsuhiro Gotanda

    2016-01-01

    Full Text Available Radiochromic film dosimeters have a disadvantage in comparison with an ionization chamber in that the dosimetry process is time-consuming for creating a density-absorbed dose calibration curve. The purpose of this study was the development of a simplified method of creating a density-absorbed dose calibration curve from radiochromic film within a short time. This simplified method was performed using Gafchromic EBT3 film with a low energy dependence and step-shaped Al filter. The simplified method was compared with the standard method. The density-absorbed dose calibration curves created using the simplified and standard methods exhibited approximately similar straight lines, and the gradients of the density-absorbed dose calibration curves were −32.336 and −33.746, respectively. The simplified method can obtain calibration curves within a much shorter time compared to the standard method. It is considered that the simplified method for EBT3 film offers a more time-efficient means of determining the density-absorbed dose calibration curve within a low absorbed dose range such as the diagnostic range.

  12. Using Qualitative Methods to Create a Home Health Web Application User Interface for Patients with Low Computer Proficiency.

    Science.gov (United States)

    Baier, Rosa R; Cooper, Emily; Wysocki, Andrea; Gravenstein, Stefan; Clark, Melissa

    2015-01-01

    Despite the investment in public reporting for a number of healthcare settings, evidence indicates that consumers do not routinely use available data to select providers. This suggests that existing reports do not adequately incorporate recommendations for consumer-facing reports or web applications. Healthcentric Advisors and Brown University undertook a multi-phased approach to create a consumer-facing home health web application in Rhode Island. This included reviewing the evidence base review to identify design recommendations and then creating a paper prototype and wireframe. We performed qualitative research to iteratively test our proposed user interface with two user groups, home health consumers and hospital case managers, refining our design to create the final web application. To test our prototype, we conducted two focus groups, with a total of 13 consumers, and 28 case manager interviews. Both user groups responded favorably to the prototype, with the majority commenting that they felt this type of tool would be useful. Case managers suggested revisions to ensure the application conformed to laws requiring Medicare patients to have the freedom to choose among providers and could be incorporated into hospital workflow. After incorporating changes and creating the wireframe, we conducted usability testing interviews with 14 home health consumers and six hospital case managers. We found that consumers needed prompting to navigate through the wireframe; they demonstrated confusion through both their words and body language. As a result, we modified the web application's sequence, navigation, and function to provide additional instructions and prompts. Although we designed our web application for low literacy and low health literacy, using recommendations from the evidence base, we overestimated the extent to which older adults were familiar with using computers. Some of our key learnings and recommendations run counter to general web design principles

  13. Spatial-temporal Evolution of Karst Rocky Desertification and Future Trends Based on CA-Markov Methods in Typical Karst Valley

    Directory of Open Access Journals (Sweden)

    CHEN Fei

    2018-02-01

    Full Text Available Karst rocky desertification(KRDhas become the most serious ecological disaster in Southwest China. It is very important and much-needed to explore the rule of spatial-temporal evolution of KRD for ecological restoration and sustainable development of the region. In this paper, the improved accurate remote sensing image interpreting method and CA-Markov prediction method were used to explore the spatial-temporal evolution rule of KRD in the study area from 1990 to 2021 based on the long time line remote sensing image of the year of 1990, 2004 and 2016. The results were as follows:the spatial -temporal evolution rule of KRD presented "first deterioration and then improvement" in the study area at nearly 30 years. The deterioration of KRD was affected by high intensity overload human activities and natural disasters in 1990-2004, which made the ecological environment deterioration. However, the KRD had gradually improved with the implementation of a series of governance projects, and a large number of rural labor forces were liberated from the land in 2004-2016, which made the natural environment restoration, and ecological system was getting better and better. At the same time, the trend of KRD evolution was showing improvement from the predicted years of 2016-2021 and the ecological environment in the region continued to become better.

  14. A Quantitative Method for the Analysis of Nomothetic Relationships between Idiographic Structures: Dynamic Patterns Create Attractor States for Sustained Posttreatment Change

    Science.gov (United States)

    Fisher, Aaron J.; Newman, Michelle G.; Molenaar, Peter C. M.

    2011-01-01

    Objective: The present article aimed to demonstrate that the establishment of dynamic patterns during the course of psychotherapy can create attractor states for continued adaptive change following the conclusion of treatment. Method: This study is a secondary analysis of T. D. Borkovec and E. Costello (1993). Of the 55 participants in the…

  15. Creating an Excellent Patient Experience Through Service Education: Content and Methods for Engaging and Motivating Front-Line Staff.

    Science.gov (United States)

    Kennedy, Denise M

    2017-12-01

    Service quality and patient satisfaction affect an organization's value-based payments. This new value paradigm calls for a new approach to service education and training for front-line staff. Thoughtfully conceived, department-specific content, infused with patient feedback, value creation, and science of service quality principles, was developed to give front-line staff a deeper understanding of the impact of their performance on patient experience, value creation, and value-based revenue. Feedback from nearly 1500 trainees in 60 educational sessions delivered over 7 years indicates good understanding of the content and appreciation of the targeted approach. On a 5-point scale ranging from 1 (least effective) to 5 (most effective), trainees' ratings of their understanding of service quality concepts and impact on value ranged from 4.7 to 4.9. Verbatim comments showed a positive impact on staff. Employee feedback suggests that value-based service education may be useful in motivating front-line staff, improving service quality, and creating value.

  16. Creating and Evaluating a Hypertext System of Documenting Analytical Test Methods in a Chemical Plant Quality Assurance Laboratory.

    Science.gov (United States)

    White, Charles E., Jr.

    The purpose of this study was to develop and implement a hypertext documentation system in an industrial laboratory and to evaluate its usefulness by participative observation and a questionnaire. Existing word-processing test method documentation was converted directly into a hypertext format or "hyperdocument." The hyperdocument was designed and…

  17. The use of smart technologies in enabling construction components reuse: A viable method or a problem creating solution?

    Science.gov (United States)

    Iacovidou, Eleni; Purnell, Phil; Lim, Ming K

    2018-06-15

    The exploitation of Radio Frequency Identification (RFID) for tracking and archiving the properties of structural construction components could be a potentially innovative disruption for the construction sector. This is because RFID can stimulate the reuse of construction components and reduce their wastage, hence addressing sustainability issues in the construction sector. To test the plausibility of that idea, this study explores the potential pre-conditions for RFID to facilitate construction components reuse, and develops a guidance for promoting their redistribution back to the supply chain. It also looks at how integrating RFID with Building Information Modelling (BIM) can possibly be a valuable extension of its capabilities, providing the opportunity for tracked components to be incorporated into new structures in an informed, sound way. A preliminary assessment of the strengths, weaknesses, opportunities and threats of the RFID technology is presented in order to depict its current and future potential in promoting construction components' sustainable lifecycle management, while emphasis has been laid on capturing their technical, environmental, economic and social value. Findings suggest that the collection of the right amount of information at the design-construction-deconstruction-reuse-disposal stage is crucial for RFID to become a successful innovation in the construction sector. Although a number of limitations related to the technical operability and recycling of RFID tags seem to currently hinder its uptake for structural components' lifecycle management, future technological innovations could provide solutions that would enable it to become a mainstream practice. Taken together these proposals advocate that the use of RFID and its integration with BIM can create the right environment for the development of new business models focused on sustainable resource management. These models may then unlock multiple values that are otherwise dissipated in

  18. System and method to create three-dimensional images of non-linear acoustic properties in a region remote from a borehole

    Science.gov (United States)

    Vu, Cung; Nihei, Kurt T.; Schmitt, Denis P.; Skelt, Christopher; Johnson, Paul A.; Guyer, Robert; TenCate, James A.; Le Bas, Pierre-Yves

    2013-01-01

    In some aspects of the disclosure, a method for creating three-dimensional images of non-linear properties and the compressional to shear velocity ratio in a region remote from a borehole using a conveyed logging tool is disclosed. In some aspects, the method includes arranging a first source in the borehole and generating a steered beam of elastic energy at a first frequency; arranging a second source in the borehole and generating a steerable beam of elastic energy at a second frequency, such that the steerable beam at the first frequency and the steerable beam at the second frequency intercept at a location away from the borehole; receiving at the borehole by a sensor a third elastic wave, created by a three wave mixing process, with a frequency equal to a difference between the first and second frequencies and a direction of propagation towards the borehole; determining a location of a three wave mixing region based on the arrangement of the first and second sources and on properties of the third wave signal; and creating three-dimensional images of the non-linear properties using data recorded by repeating the generating, receiving and determining at a plurality of azimuths, inclinations and longitudinal locations within the borehole. The method is additionally used to generate three dimensional images of the ratio of compressional to shear acoustic velocity of the same volume surrounding the borehole.

  19. A method for creating teaching movie clips using screen recording software: usefulness of teaching movies as self-learning tools for medical students

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Seong Su [The Catholic University of Korea, Suwon (Korea, Republic of)

    2007-04-15

    I wanted to describe a method to create teaching movies with using screen recordings, and I wanted to see if self-learning movies are useful for medical students. Teaching movies were created by direct recording of the screen activity and voice narration during the interpretation of educational cases; we used a PACS system and screen recording software for the recording (CamStudio, Rendersoft, U.S.A.). The usefulness of teaching movies for seft-learning of abdominal CT anatomy was evacuated by the medical students. Creating teaching movie clips with using screen recording software was simple and easy. Survey responses were collected from 43 medical students. The contents of teaching movie was adequately understandable (52%) and useful for learning (47%). Only 23% students agreed the these movies helped motivated them to learn. Teaching movies were more useful than still photographs of the teaching image files. The students wanted teaching movies on the cross-sectional CT anatomy of different body regions (82%) and for understanding the radiological interpretation of various diseases (42%). Creating teaching movie by direct screen recording of a radiologist's interpretation process is easy and simple. The teaching video clips reveal a radiologist's interpretation process or the explanation of teaching cases with his/her own voice narration, and it is an effective self-learning tool for medical students and residents.

  20. A method for creating teaching movie clips using screen recording software: usefulness of teaching movies as self-learning tools for medical students

    International Nuclear Information System (INIS)

    Hwang, Seong Su

    2007-01-01

    I wanted to describe a method to create teaching movies with using screen recordings, and I wanted to see if self-learning movies are useful for medical students. Teaching movies were created by direct recording of the screen activity and voice narration during the interpretation of educational cases; we used a PACS system and screen recording software for the recording (CamStudio, Rendersoft, U.S.A.). The usefulness of teaching movies for seft-learning of abdominal CT anatomy was evacuated by the medical students. Creating teaching movie clips with using screen recording software was simple and easy. Survey responses were collected from 43 medical students. The contents of teaching movie was adequately understandable (52%) and useful for learning (47%). Only 23% students agreed the these movies helped motivated them to learn. Teaching movies were more useful than still photographs of the teaching image files. The students wanted teaching movies on the cross-sectional CT anatomy of different body regions (82%) and for understanding the radiological interpretation of various diseases (42%). Creating teaching movie by direct screen recording of a radiologist's interpretation process is easy and simple. The teaching video clips reveal a radiologist's interpretation process or the explanation of teaching cases with his/her own voice narration, and it is an effective self-learning tool for medical students and residents

  1. A preliminary approach to creating an overview of lactoferrin multi-functionality utilizing a text mining method.

    Science.gov (United States)

    Shimazaki, Kei-ichi; Kushida, Tatsuya

    2010-06-01

    Lactoferrin is a multi-functional metal-binding glycoprotein that exhibits many biological functions of interest to many researchers from the fields of clinical medicine, dentistry, pharmacology, veterinary medicine, nutrition and milk science. To date, a number of academic reports concerning the biological activities of lactoferrin have been published and are easily accessible through public data repositories. However, as the literature is expanding daily, this presents challenges in understanding the larger picture of lactoferrin function and mechanisms. In order to overcome the "analysis paralysis" associated with lactoferrin information, we attempted to apply a text mining method to the accumulated lactoferrin literature. To this end, we used the information extraction system GENPAC (provided by Nalapro Technologies Inc., Tokyo). This information extraction system uses natural language processing and text mining technology. This system analyzes the sentences and titles from abstracts stored in the PubMed database, and can automatically extract binary relations that consist of interactions between genes/proteins, chemicals and diseases/functions. We expect that such information visualization analysis will be useful in determining novel relationships among a multitude of lactoferrin functions and mechanisms. We have demonstrated the utilization of this method to find pathways of lactoferrin participation in neovascularization, Helicobacter pylori attack on gastric mucosa, atopic dermatitis and lipid metabolism.

  2. A Fragment-Based Method of Creating Small-Molecule Libraries to Target the Aggregation of Intrinsically Disordered Proteins.

    Science.gov (United States)

    Joshi, Priyanka; Chia, Sean; Habchi, Johnny; Knowles, Tuomas P J; Dobson, Christopher M; Vendruscolo, Michele

    2016-03-14

    The aggregation process of intrinsically disordered proteins (IDPs) has been associated with a wide range of neurodegenerative disorders, including Alzheimer's and Parkinson's diseases. Currently, however, no drug in clinical use targets IDP aggregation. To facilitate drug discovery programs in this important and challenging area, we describe a fragment-based approach of generating small-molecule libraries that target specific IDPs. The method is based on the use of molecular fragments extracted from compounds reported in the literature to inhibit of the aggregation of IDPs. These fragments are used to screen existing large generic libraries of small molecules to form smaller libraries specific for given IDPs. We illustrate this approach by describing three distinct small-molecule libraries to target, Aβ, tau, and α-synuclein, which are three IDPs implicated in Alzheimer's and Parkinson's diseases. The strategy described here offers novel opportunities for the identification of effective molecular scaffolds for drug discovery for neurodegenerative disorders and to provide insights into the mechanism of small-molecule binding to IDPs.

  3. A standardized method to create peripheral nerve injury in dogs using an automatic non-serrated forceps

    Institute of Scientific and Technical Information of China (English)

    Xuhui Wang; Shiting Li; Liang Wan; Xinyuan Li; Youqiang Meng; Ningxi Zhu; Min Yang; Baohui Feng; Wenchuan Zhang; Shugan Zhu

    2012-01-01

    This study describes a method that not only generates an automatic and standardized crush injury in the skull base, but also provides investigators with the option to choose from a range of varying pressure levels. We designed an automatic, non-serrated forceps that exerts a varying force of 0 to 100 g and lasts for a defined period of 0 to 60 seconds. This device was then used to generate a crush injury to the right oculomotor nerve of dogs with a force of 10 g for 15 seconds, resulting in a deficit in the pupil-light reflex and ptosis. Further testing of our model with Toluidine-blue staining demonstrated that, at 2 weeks post-surgery disordered oculomotor nerve fibers, axonal loss, and a thinner than normal myelin sheath were visible. Electrophysiological examination showed occasional spontaneous potentials. Together, these data verified that the model for oculomotor nerve injury was successful, and that the forceps we designed can be used to establish standard mechanical injury models of peripheral nerves.

  4. Testing typicality in multiverse cosmology

    Science.gov (United States)

    Azhar, Feraz

    2015-05-01

    In extracting predictions from theories that describe a multiverse, we face the difficulty that we must assess probability distributions over possible observations prescribed not just by an underlying theory, but by a theory together with a conditionalization scheme that allows for (anthropic) selection effects. This means we usually need to compare distributions that are consistent with a broad range of possible observations with actual experimental data. One controversial means of making this comparison is by invoking the "principle of mediocrity": that is, the principle that we are typical of the reference class implicit in the conjunction of the theory and the conditionalization scheme. In this paper, we quantitatively assess the principle of mediocrity in a range of cosmological settings, employing "xerographic distributions" to impose a variety of assumptions regarding typicality. We find that for a fixed theory, the assumption that we are typical gives rise to higher likelihoods for our observations. If, however, one allows both the underlying theory and the assumption of typicality to vary, then the assumption of typicality does not always provide the highest likelihoods. Interpreted from a Bayesian perspective, these results support the claim that when one has the freedom to consider different combinations of theories and xerographic distributions (or different "frameworks"), one should favor the framework that has the highest posterior probability; and then from this framework one can infer, in particular, how typical we are. In this way, the invocation of the principle of mediocrity is more questionable than has been recently claimed.

  5. Influence of the reclamation method of spent moulding sands on the possibility of creating favourable conditions for gases flow in a mould

    Directory of Open Access Journals (Sweden)

    Łucarz M.

    2017-03-01

    Full Text Available The results of investigations concerning the influence of the applied sand matrix (fresh sand, reclaim on the properties of moulding sands used for production of large dimensional castings (ingot moulds, ladles, are presented in the hereby paper. The performed investigations were aimed at determining the influence of various reclamation methods of spent moulding sands on the quality of the obtained reclaimed material. Moulding sands were prepared on the fresh quartz matrix as well as on sand matrices obtained after various reclamation methods. The selected moulding sand parameters were tested (strength, permeability, grindability, ignition losses, pH reactions. It can be stated, on the basis of the performed investigations, that the kind of the applied moulding sand matrix is of an essential meaning from the point of view of creating conditions minimising formation of large amounts of gases and their directional migration in a casting mould.

  6. Theory of Mind experience sampling in typical adults.

    Science.gov (United States)

    Bryant, Lauren; Coffey, Anna; Povinelli, Daniel J; Pruett, John R

    2013-09-01

    We explored the frequency with which typical adults make Theory of Mind (ToM) attributions, and under what circumstances these attributions occur. We used an experience sampling method to query 30 typical adults about their everyday thoughts. Participants carried a Personal Data Assistant (PDA) that prompted them to categorize their thoughts as Action, Mental State, or Miscellaneous at approximately 30 pseudo-random times during a continuous 10-h period. Additionally, participants noted the direction of their thought (self versus other) and degree of socializing (with people versus alone) at the time of inquiry. We were interested in the relative frequency of ToM (mental state attributions) and how prominent they were in immediate social exchanges. Analyses of multiple choice answers suggest that typical adults: (1) spend more time thinking about actions than mental states and miscellaneous things, (2) exhibit a higher degree of own- versus other-directed thought when alone, and (3) make mental state attributions more frequently when not interacting (offline) than while interacting with others (online). A significant 3-way interaction between thought type, direction of thought, and socializing emerged because action but not mental state thoughts about others occurred more frequently when participants were interacting with people versus when alone; whereas there was an increase in the frequency of both action and mental state attributions about the self when participants were alone as opposed to socializing. A secondary analysis of coded free text responses supports findings 1-3. The results of this study help to create a more naturalistic picture of ToM use in everyday life and the method shows promise for future study of typical and atypical thought processes. Copyright © 2013 Elsevier Inc. All rights reserved.

  7. An in situ method of creating metal oxide–carbon composites and their application as anode materials for lithium-ion batteries

    KAUST Repository

    Yang, Zichao

    2011-01-01

    Transition metal oxides are actively investigated as anode materials for lithium-ion batteries (LIBs), and their nanocomposites with carbon frequently show better performance in galvanostatic cycling studies, compared to the pristine metal oxide. An in situ, scalable method for creating a variety of transition metal oxide-carbon nanocomposites has been developed based on free-radical polymerization and cross-linking of poly(acrylonitrile) in the presence of the metal oxide precursor containing vinyl groups. The approach yields a cross-linked polymer network, which uniformly incorporates nanometre-sized transition metal oxide particles. Thermal treatment of the organic-inorganic hybrid material produces nearly monodisperse metal oxide nanoparticles uniformly embedded in a porous carbon matrix. Cyclic voltammetry and galvanostatic cycling electrochemical measurements in a lithium half-cell are used to evaluate the electrochemical properties of a Fe3O 4-carbon composite created using this approach. These measurements reveal that when used as the anode in a lithium battery, the material exhibits stable cycling performance at both low and high current densities. We further show that the polymer/nanoparticle copolymerization approach can be readily adapted to synthesize metal oxide/carbon nanocomposites based on different particle chemistries for applications in both the anode and cathode of LIBs. © 2011 The Royal Society of Chemistry.

  8. Auto-ethnographical investigation of turning points in dance education – a method for creating awareness of one’s own pre-understanding in qualitative research

    Directory of Open Access Journals (Sweden)

    Trine Ørbæk

    2013-06-01

    Full Text Available This article presents an auto-ethnographical investigation of a pedagogical practice in creative dance education. This research is a part of the PhD-project “To create dance” in physical education teacher education based at The Norwegian School of Sport Sciences and The Norwegian National Graduate School in Teacher Education. The method used is based on life stories, and turning points are used as analytical tools. The turning point analysis highlights that an auto-ethnographical investigation is relevant when it comes to creating awareness of pre-understandings in the development of pedagogical experiences from one’s own research field. In addition, the article shows that the turning point analysis may contribute to increasing knowledge on how one’s own experience can change when narrated in new ways. Finally, the study shows that making use of auto-ethnography may also have value as a reflexive approach for becoming more conscious of one’s own research process.

  9. The Munik—Reteaming Method is a Way to Rehabilitate Psychosomatic and Work-Related Diseases and a Way to Create Healthy Psychosocial Workplaces

    Directory of Open Access Journals (Sweden)

    Pia von Vultée

    2017-11-01

    Full Text Available Background: Mental illness and stress are increasing at work. Sick leaves escalate. It is suggested to be due to organizational factors. There are a few methods to identify the organizational factors creating the negative psychosocial atmosphere at work. In Sweden, the work-related diseases have increased by 70% since 2010. Methods: Munik is a validated assessment instrument to identify psychosocial status among employees and find weak and strong organizational factors involved in the individual psychosocial well-being. We measure psychosocial well-being as mental energy, work-related exhaustion, and work satisfaction. Conclusions: In this study, we evaluate the treatment of employees at risk with low values on mental energy, high risk for developing work-related exhaustion, and reporting poor work satisfaction. Originality: We used Ben Furman’s positive solution-based coaching/therapy. This resulted in a more satisfied work group, and even though this group showed a large risk of developing work-related exhaustion in the start, none of the participants got on sick leave during the coaching/therapy period. After 3 months, 8 of 10 reported higher values on all 3 psychosocial levels measured.

  10. Typical horticultural products between tradition and innovation

    Directory of Open Access Journals (Sweden)

    Innocenza Chessa

    Full Text Available Recent EU and National policies for agriculture and rural development are mainly focused to foster the production of high quality products as a result of the increasing demand of food safety, typical foods and traditional processing methods. Another word very often used to describe foods in these days is “typicality” which pools together the concepts of “food connected with a specific place”, “historical memory and tradition” and “culture”. The importance for the EU and the National administrations of the above mentioned kind of food is demonstrated, among other things, by the high number of the PDO, PGI and TSG certificated products in Italy. In this period of global markets and economical crisis farmers are realizing how “typical products” can be an opportunity to maintain their market share and to improve the economy of local areas. At the same time, new tools and strategy are needed to reach these goals. A lack of knowledge has being recognized also on how new technologies and results coming from recent research can help in exploiting traditional product and in maintaining the biodiversity. Taking into account the great variety and richness of typical products, landscapes and biodiversity, this report will describe and analyze the relationships among typicality, innovation and research in horticulture. At the beginning “typicality” and “innovation” will be defined also through some statistical features, which ranks Italy at the first place in terms of number of typical labelled products, then will be highlighted how typical products of high quality and connected with the tradition and culture of specific production areas are in a strict relationship with the value of agro-biodiversity. Several different examples will be used to explain different successful methods and/or strategies used to exploit and foster typical Italian vegetables, fruits and flowers. Finally, as a conclusion, since it is thought that

  11. PTL: A Propositional Typicality Logic

    CSIR Research Space (South Africa)

    Booth, R

    2012-09-01

    Full Text Available consequence relations first studied by Lehmann and col- leagues in the 90?s play a central role in nonmonotonic reasoning [13, 14]. This has been the case due to at least three main reasons. Firstly, they are based on semantic constructions that are elegant...) j ; 6j : ^ j PTL: A Propositional Typicality Logic 3 The semantics of (propositional) rational consequence is in terms of ranked models. These are partially ordered structures in which the ordering is modular. Definition 1. Given a set S...

  12. Creating the living brand.

    Science.gov (United States)

    Bendapudi, Neeli; Bendapudi, Venkat

    2005-05-01

    It's easy to conclude from the literature and the lore that top-notch customer service is the province of a few luxury companies and that any retailer outside that rarefied atmosphere is condemned to offer mediocre service at best. But even companies that position themselves for the mass market can provide outstanding customer-employee interactions and profit from them, if they train employees to reflect the brand's core values. The authors studied the convenience store industry in depth and focused on two that have developed a devoted following: QuikTrip (QT) and Wawa. Turnover rates at QT and Wawa are 14% and 22% respectively, much lower than the typical rate in retail. The authors found six principles that both firms embrace to create a strong culture of customer service. Know what you're looking for: A focus on candidates' intrinsic traits allows the companies to hire people who will naturally bring the right qualities to the job. Make the most of talent: In mass-market retail, talent is generally viewed as a commodity, but that outlook becomes a self-fulfilling prophesy. Create pride in the brand: Service quality depends directly on employees' attachment to the brand. Build community: Wawa and QT have made concerted efforts to build customer loyalty through a sense of community. Share the business context: Employees need a clear understanding of how their company operates and how it defines success. Satisfy the soul: To win an employee's passionate engagement, a company must meet his or her needs for security, esteem, and justice.

  13. Creating visual explanations improves learning.

    Science.gov (United States)

    Bobek, Eliza; Tversky, Barbara

    2016-01-01

    Many topics in science are notoriously difficult for students to learn. Mechanisms and processes outside student experience present particular challenges. While instruction typically involves visualizations, students usually explain in words. Because visual explanations can show parts and processes of complex systems directly, creating them should have benefits beyond creating verbal explanations. We compared learning from creating visual or verbal explanations for two STEM domains, a mechanical system (bicycle pump) and a chemical system (bonding). Both kinds of explanations were analyzed for content and learning assess by a post-test. For the mechanical system, creating a visual explanation increased understanding particularly for participants of low spatial ability. For the chemical system, creating both visual and verbal explanations improved learning without new teaching. Creating a visual explanation was superior and benefitted participants of both high and low spatial ability. Visual explanations often included crucial yet invisible features. The greater effectiveness of visual explanations appears attributable to the checks they provide for completeness and coherence as well as to their roles as platforms for inference. The benefits should generalize to other domains like the social sciences, history, and archeology where important information can be visualized. Together, the findings provide support for the use of learner-generated visual explanations as a powerful learning tool.

  14. Creating a testing field where delta technology and water innovations are tested and demonstrated with the help of citizen science methods

    Science.gov (United States)

    de Vries, Sandra; Rutten, Martine; de Vries, Liselotte; Anema, Kim; Klop, Tanja; Kaspersma, Judith

    2017-04-01

    In highly populated deltas, much work is to be done. Complex problems ask for new and knowledge driven solutions. Innovations in delta technology and water can bring relief to managing the water rich urban areas. Testing fields form a fundamental part of the knowledge valorisation for such innovations. In such testing fields, product development by start-ups is coupled with researchers, thus supplying new scientific insights. With the help of tests, demonstrations and large-scale applications by the end-users, these innovations find their way to the daily practices of delta management. More and more cities embrace the concept of Smart Cities to tackle the ongoing complexity of urban problems and to manage the city's assets - such as its water supply networks and other water management infrastructure. Through the use of new technologies and innovative systems, data are collected from and with citizens and devices - then processed and analysed. The information and knowledge gathered are keys to enabling a better quality of life. By testing water innovations together with citizens in order to find solutions for water management problems, not only highly spatial amounts of data are provided by and/or about these innovations, they are also improved and demonstrated to the public. A consortium consisting of a water authority, a science centre, a valorisation program and two universities have joined forces to create a testing field for delta technology and water innovations using citizen science methods. In this testing field, the use of citizen science for water technologies is researched and validated by facilitating pilot projects. In these projects, researchers, start-ups and citizens work together to find the answer to present-day water management problems. The above mentioned testing field tests the use of crowd-sourcing data as for example hydrological model inputs, or to validate remote sensing applications, or improve water management decisions. Currently the

  15. Foods Inducing Typical Gastroesophageal Reflux Disease Symptoms in Korea

    OpenAIRE

    Choe, Jung Wan; Joo, Moon Kyung; Kim, Hyo Jung; Lee, Beom Jae; Kim, Ji Hoon; Yeon, Jong Eun; Park, Jong-Jae; Kim, Jae Seon; Byun, Kwan Soo; Bak, Young-Tae

    2017-01-01

    Background/Aims Several specific foods are known to precipitate gastroesophageal reflux disease (GERD) symptoms and GERD patients are usually advised to avoid such foods. However, foods consumed daily are quite variable according to regions, cultures, etc. This study was done to elucidate the food items which induce typical GERD symptoms in Korean patients. Methods One hundred and twenty-six Korean patients with weekly typical GERD symptoms were asked to mark all food items that induced typic...

  16. Create Your Plate

    Medline Plus

    Full Text Available ... Plate Share Create Your Plate ! Share: Seven Simple Steps to Create Your Plate It's simple and effective ... foods within each food category. Try these seven steps to get started: Using your dinner plate, put ...

  17. Create Your Plate

    Medline Plus

    Full Text Available ... for Association Events Messaging Tools Recruiting Advocates Local Market Planning Training Webinars News & Events Advocacy News Call ... Meals > Create Your Plate Share: Print Page Text Size: A A A Listen En Español Create Your ...

  18. Create Your Plate

    Medline Plus

    Full Text Available ... of the differences in types of vegetables. When creating your plate at home, remember that half of ... effective for both managing diabetes and losing weight. Creating your plate lets you still choose the foods ...

  19. Creating a simplified model of oil refining and solution of the model using a linear programming method. Part 1, Model presentation

    Energy Technology Data Exchange (ETDEWEB)

    Duric, M; Novakovic, M; Stojkanovic, L

    1983-01-01

    Based on a detailed analysis of technological limitations in oil refining at an oil refinery (NPZ) in the separation of petroleum products, specifications with regard to quality and market limitations, a general model is created of oil refining. The number of actual variables is reduced to a minimum, while the number of linear limitations is adapted to the selected technology and raw material quality. The nonlinearity of certain characteristics is overcome using the so called movement factor.

  20. Aged in a typical South African township: creating a liveable and supportive environment

    CSIR Research Space (South Africa)

    Motsatsi, L

    2010-09-01

    Full Text Available The 21st century is witnessing a rapid demographic change due to a worldwide increase in the number of people aged 60 and above. The improved quality of life contributes to this longevity. (WHO, 2004). The world’s older population is growing...

  1. Ustvarjanje produktivnega geografskega učnega okolja z vidika učnih stilov, oblik in metod = Creating the productive geographical learning environment from the point of view of learning-styles and learning-methods

    Directory of Open Access Journals (Sweden)

    Lea Nemec

    2008-01-01

    Full Text Available Experiences, which we receive in space (indirectly influence on education process respectivelyon learning-environment. Because of that is the most productive learning-environmentthose witch founded on experiential-learning. In this research experience took the leadingplace in forming didactical approaches in teaching geography and to define learning-stylesand methods respectively in the direction of creating representative geographical learningenvironment.

  2. Create Your Plate

    Medline Plus

    Full Text Available ... In Memory In Honor Become a Member En Español Type 1 Type 2 About Us Online Community ... Page Text Size: A A A Listen En Español Create Your Plate Create Your Plate is a ...

  3. Create Your Plate

    Medline Plus

    Full Text Available ... Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart-Healthy Foods Holiday Meal Planning ... Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets ...

  4. Create Your Plate

    Medline Plus

    Full Text Available ... Planning Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart- ... Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy Foods ...

  5. Create Your Plate

    Medline Plus

    Full Text Available ... Planning Meals > Create Your Plate Share: Print Page Text Size: A A A Listen En Español Create ... Type 2 Education Series Hear audio clips and full recordings of past Q&A events at your ...

  6. Numerical stability of finite difference algorithms for electrochemical kinetic simulations: Matrix stability analysis of the classic explicit, fully implicit and Crank-Nicolson methods and typical problems involving mixed boundary conditions

    DEFF Research Database (Denmark)

    Bieniasz, Leslaw K.; Østerby, Ole; Britz, Dieter

    1995-01-01

    The stepwise numerical stability of the classic explicit, fully implicit and Crank-Nicolson finite difference discretizations of example diffusional initial boundary value problems from electrochemical kinetics has been investigated using the matrix method of stability analysis. Special attention...... has been paid to the effect of the discretization of the mixed, linear boundary condition with time-dependent coefficients on stability, assuming the two-point forward-difference approximations for the gradient at the left boundary (electrode). Under accepted assumptions one obtains the usual...... stability criteria for the classic explicit and fully implicit methods. The Crank-Nicolson method turns out to be only conditionally stable in contrast to the current thought regarding this method....

  7. Creating advantages with Franchising in healthcare: An explorative mixed methods study on the role of the relationship between the franchisor and units

    OpenAIRE

    Nijmeijer, Karlijn J.; Fabbricotti, Isabelle; Huijsman, Robbert

    2015-01-01

    textabstractBackground Franchising is a promising and increasingly used organizational form to improve strategic, organizational, professional and client-related results in healthcare. However, evidence is scarce regarding how franchises should be operated to actualize such results. This paper aimed to explore the association between the results achieved by healthcare franchises and the working relationships among actors in these franchises. Methods A sequential mixed methods approach was use...

  8. Typicality and misinformation: Two sources of distortion

    Directory of Open Access Journals (Sweden)

    Malen Migueles

    2008-01-01

    Full Text Available This study examined the effect of two sources of memory error: exposure to post-event information and extracting typical contents from schemata. Participants were shown a video of a bank robbery and presented with highand low-typicality misinformation extracted from two normative studies. The misleading suggestions consisted of either changes in the original video information or additions of completely new contents. In the subsequent recognition task the post-event misinformation produced memory impairment. The participants used the underlying schema of the event to extract high-typicality information which had become integrated with episodic information, thus giving rise to more hits and false alarms for these items. However, the effect of exposure to misinformation was greater on low-typicality items. There were no differences between changed or added information, but there were more false alarms when a low-typicality item was changed to a high-typicality item

  9. Creating more effective graphs

    CERN Document Server

    Robbins, Naomi B

    2012-01-01

    A succinct and highly readable guide to creating effective graphs The right graph can be a powerful tool for communicating information, improving a presentation, or conveying your point in print. If your professional endeavors call for you to present data graphically, here's a book that can help you do it more effectively. Creating More Effective Graphs gives you the basic knowledge and techniques required to choose and create appropriate graphs for a broad range of applications. Using real-world examples everyone can relate to, the author draws on her years of experience in gr

  10. Create Your Plate

    Medline Plus

    Full Text Available ... Food Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy Foods donate en -- A Future Without Diabetes - a- ...

  11. Create Your Plate

    Medline Plus

    Full Text Available ... Risk Test Lower Your Risk Healthy Eating Overweight Smoking High Blood Pressure Physical Activity High Blood Glucose ... Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart- ...

  12. Create Your Plate

    Medline Plus

    Full Text Available ... Risk Test Lower Your Risk Healthy Eating Overweight Smoking High Blood Pressure Physical Activity High Blood Glucose ... Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets ...

  13. Create Your Plate

    Medline Plus

    Full Text Available ... Recipes Association Cookbook Recipes Planning Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning ... serving of dairy or both as your meal plan allows. Choose healthy fats in small amounts. For ...

  14. Create Your Plate

    Medline Plus

    Full Text Available ... Food MyFoodAdvisor Recipes Association Cookbook Recipes Planning Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart-Healthy Foods Holiday Meal ...

  15. Create Your Plate

    Medline Plus

    Full Text Available ... Index Low-Calorie Sweeteners Sugar and Desserts Fitness Exercise & Type 1 Diabetes Get Started Safely Get And ... Plate Create Your Plate is a simple and effective way to manage your blood glucose levels and ...

  16. Create Your Plate

    Medline Plus

    Full Text Available ... Us in the Fight for a Cure Your tax-deductible gift today can fund critical diabetes research ... Close www.diabetes.org > Food and Fitness > Food > Planning Meals > Create Your Plate Share: Print Page Text ...

  17. Create Your Plate

    Medline Plus

    Full Text Available ... critical diabetes research and support vital diabetes education services that improve the lives of those with diabetes. $50 $100 $250 $500 Other Other Ways ... Meals > Create Your Plate ...

  18. Create Your Plate

    Medline Plus

    Full Text Available ... Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with ... Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy ...

  19. Create Your Plate

    Medline Plus

    Full Text Available ... Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart-Healthy Foods Holiday Meal ... Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook ...

  20. APPLICATION OF THE SPECTROMETRIC METHOD FOR CALCULATING THE DOSE RATE FOR CREATING CALIBRATION HIGHLY SENSITIVE INSTRUMENTS BASED ON SCINTILLATION DETECTION UNITS

    Directory of Open Access Journals (Sweden)

    R. V. Lukashevich

    2017-01-01

    Full Text Available Devices based on scintillation detector are highly sensitive to photon radiation and are widely used to measure the environment dose rate. Modernization of the measuring path to minimize the error in measuring the response of the detector to gamma radiation has already reached its technological ceiling and does not give the proper effect. More promising for this purpose are new methods of processing the obtained spectrometric information. The purpose of this work is the development of highly sensitive instruments based on scintillation detection units using a spectrometric method for calculating dose rate.In this paper we consider the spectrometric method of dosimetry of gamma radiation based on the transformation of the measured instrumental spectrum. Using predetermined or measured functions of the detector response to the action of gamma radiation of a given energy and flux density, a certain function of the energy G(E is determined. Using this function as the core of the integral transformation from the field to dose characteristic, it is possible to obtain the dose value directly from the current instrumentation spectrum. Applying the function G(E to the energy distribution of the fluence of photon radiation in the environment, the total dose rate can be determined without information on the distribution of radioisotopes in the environment.To determine G(E by Monte-Carlo method instrumental response function of the scintillator detector to monoenergetic photon radiation sources as well as other characteristics are calculated. Then the whole full-scale energy range is divided into energy ranges for which the function G(E is calculated using a linear interpolation.Spectrometric method for dose calculation using the function G(E, which allows the use of scintillation detection units for a wide range of dosimetry applications is considered in the article. As well as describes the method of calculating this function by using Monte-Carlo methods

  1. ONE TYPICAL EXTREMUM IN ELECTRICAL PROBLEMS

    Directory of Open Access Journals (Sweden)

    V. I. Goroshko

    2014-01-01

    Full Text Available The aim of this work is to attract attention of teachers, scientific personnel, engineers and students to one peculiarity of extremum seeking in different electrical problems. This feature lies in the fact that in many parts of electrical engineering extremum seeking comes to analysis one and the same mathematical structure (T-structure, but differences lie only in many symbols (designation.In one problems this structure appear in finale, the most simple form, but in others – T-structure is “veiled”, and as a rule  we need  elementary algebraic transformation to detect it.Taking into account high frequency of this structure appearing in electrical problems, in the first part of article the authors  carried out the investigation of extremum characteristics of T-structure and show the results in easy algorithms. To determine the typical T-structure there were taken five problems-examples for extremum seeking  from different parts of electrical engineering. The first and the second examples belong to the theory of electrical circuits.In the first example the problem of maximum active load power obtaining was considered, in the second we see the solution of problem for inductive coupled circuit adjustment in order to obtain the hump current. In the third example the band active filter, built on operating amplifier, is analyzed. According to these methods, taken in the first part of article, the frequency is determined, on which amplifier provides maximum  amplification factor. The forth example deals with analysis of efficiency of transformer. According to algorithm, the optimal efficiency of transformer’s load and also equation for its maximum was determined in this article. In the fifth example the mechanical characteristics of induction motor is analyzed. It is indicated how, on the basis of algorithms article, to obtain equations for critical slip and motor moment, and also the simple development of formula Klossa.The methods of

  2. A Typical Verification Challenge for the GRID

    NARCIS (Netherlands)

    van de Pol, Jan Cornelis; Bal, H. E.; Brim, L.; Leucker, M.

    2008-01-01

    A typical verification challenge for the GRID community is presented. The concrete challenge is to implement a simple recursive algorithm for finding the strongly connected components in a graph. The graph is typically stored in the collective memory of a number of computers, so a distributed

  3. Creating Advantages with Franchising in Healthcare: An Explorative Mixed Methods Study on the Role of the Relationship between the Franchisor and Units

    Science.gov (United States)

    Nijmeijer, Karlijn Jojanneke; Fabbricotti, Isabelle Natalina; Huijsman, Robbert

    2015-01-01

    Background Franchising is a promising and increasingly used organizational form to improve strategic, organizational, professional and client-related results in healthcare. However, evidence is scarce regarding how franchises should be operated to actualize such results. This paper aimed to explore the association between the results achieved by healthcare franchises and the working relationships among actors in these franchises. Methods A sequential mixed methods approach was used to obtain both in-depth and broader quantifiable insights into a little-investigated phenomenon. We first employed a qualitative multiple embedded case study. Data were collected through observations, document analyses, and 96 in-depth semi-structured interviews in three Dutch healthcare franchises. Within-case and cross-case comparative analyses were conducted. Subsequently, a cross-sectional survey was developed based on the qualitative study and disseminated among 19 healthcare franchises. 40 franchisors and 346 unit actors filled in the questionnaire. Findings It seems important to have open, committed, cooperative franchise relationships in which professional franchisees and unit managers feel and trust that they have the opportunity to introduce ideas and articulate their needs to the franchisor. Such relationships help ensure satisfaction, survival, and quality of care, because they serve to foster synergy realization and local fit and prevent reinventing the wheel and professional resistance. PMID:25664581

  4. Improved ultra-performance liquid chromatography with electrospray ionization quadrupole-time-of-flight high-definition mass spectrometry method for the rapid analysis of the chemical constituents of a typical medical formula: Liuwei Dihuang Wan.

    Science.gov (United States)

    Wang, Ping; Lv, Hai tao; Zhang, Ai hua; Sun, Hui; Yan, Guang li; Han, Ying; Wu, Xiu hong; Wang, Xi jun

    2013-11-01

    Liuwei Dihuang Wan (LDW), a classic Chinese medicinal formula, has been used to improve or restore declined functions related to aging and geriatric diseases, such as impaired mobility, vision, hearing, cognition, and memory. It has attracted increasing attention as one of the most popular and valuable herbal medicines. However, the systematic analysis of the chemical constituents of LDW is difficult and thus has not been well established. In this paper, a rapid, sensitive, and reliable ultra-performance LC with ESI quadrupole TOF high-definition MS method with automated MetaboLynx analysis in positive and negative ion mode was established to characterize the chemical constituents of LDW. The analysis was performed on a Waters UPLC™ HSS T3 using a gradient elution system. MS/MS fragmentation behavior was proposed for aiding the structural identification of the components. Under the optimized conditions, a total of 50 peaks were tentatively characterized by comparing the retention time and MS data. It is concluded that a rapid and robust platform based on ultra-performance LC with ESI quadrupole TOF high-definition MS has been successfully developed for globally identifying multiple constituents of traditional Chinese medicine prescriptions. This is the first report on the systematic analysis of the chemical constituents of LDW. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Generation of typical meteorological year for different climates of China

    International Nuclear Information System (INIS)

    Jiang, Yingni

    2010-01-01

    Accurate prediction of building energy performance requires precise information of the local climate. Typical weather year files like typical meteorological year (TMY) are commonly used in building simulation. They are also essential for numerical analysis of sustainable and renewable energy systems. The present paper presents the generation of typical meteorological year (TMY) for eight typical cities representing the major climate zones of China. The data set, which includes global solar radiation data and other meteorological parameters referring to dry bulb temperature, relative humidity, wind speed, has been analyzed. The typical meteorological year is generated from the available meteorological data recorded during the period 1995-2004, using the Finkelstein-Schafer statistical method. The cumulative distribution function (CDF) for each year is compared with the CDF for the long-term composite of all the years in the period. Typical months for each of the 12 calendar months from the period of years are selected by choosing the one with the smallest deviation from the long-term CDF. The 12 typical months selected from the different years are used for the formulation of a TMY.

  6. Creating organizational cultures

    DEFF Research Database (Denmark)

    Mouton, Nicolaas T.O.; Just, Sine Nørholm; Gabrielsen, Jonas

    2012-01-01

    Purpose – The purpose of this paper is to re-conceptualize the relations between rhetorical strategies and material practices in the processes whereby leaders create or change organizational cultures. Design/methodology/approach – The authors compare and contrast two broad perspectives on cultural...... insights. The authors propose an integrated perspective in which material practices and rhetorical strategies are seen as two analytical sides of the same ontological coin. This enables a fuller and more detailed explanation of how organizational cultures are created or changed. A brief illustration...

  7. Creating Web Pages Simplified

    CERN Document Server

    Wooldridge, Mike

    2011-01-01

    The easiest way to learn how to create a Web page for your family or organization Do you want to share photos and family lore with relatives far away? Have you been put in charge of communication for your neighborhood group or nonprofit organization? A Web page is the way to get the word out, and Creating Web Pages Simplified offers an easy, visual way to learn how to build one. Full-color illustrations and concise instructions take you through all phases of Web publishing, from laying out and formatting text to enlivening pages with graphics and animation. This easy-to-follow visual guide sho

  8. Creating a palliative and end-of-life program in a cure-oriented pediatric setting: the zig-zag method.

    Science.gov (United States)

    Harper, Joann; Hinds, Pamela S; Baker, Justin N; Hicks, Judy; Spunt, Sheri L; Razzouk, Bassem I

    2007-01-01

    Children living with and dying of advanced-stage cancer suffer physically, emotionally, and spiritually. Relief of their suffering requires comprehensive, compassionate palliative and end-of-life (EoL) care.However, an EoL care program might appear inconsistent with the mission of a pediatric oncology research center committed to seeking cures. Here the authors describe the methods used to achieve full institutional commitment to their EoL care program and those used to build the program's philosophical, research, and educational foundations after they received approval. The authors convened 10 focus groups to solicit staff perceptions of the hospital's current palliative and EoL care. They also completed baseline medical record reviews of 145 patient records to identify key EoL characteristics. The authors then crafted a vision statement and a strategic plan, implemented new research protocols,and established publication and funding trajectories. They conclude that establishing a state-of-the-art palliative and EoL program in a cure-oriented pediatric setting is achievable via consensus building and recruitment of diverse institutional resources.

  9. Comparison of hand and semiautomatic tracing methods for creating maxillofacial artificial organs using sequences of computed tomography (CT) and cone beam computed tomography (CBCT) images.

    Science.gov (United States)

    Szabo, Bence T; Aksoy, Seçil; Repassy, Gabor; Csomo, Krisztian; Dobo-Nagy, Csaba; Orhan, Kaan

    2017-06-09

    The aim of this study was to compare the paranasal sinus volumes obtained by manual and semiautomatic imaging software programs using both CT and CBCT imaging. 121 computed tomography (CT) and 119 cone beam computed tomography (CBCT) examinations were selected from the databases of the authors' institutes. The Digital Imaging and Communications in Medicine (DICOM) images were imported into 3-dimensonal imaging software, in which hand mode and semiautomatic tracing methods were used to measure the volumes of both maxillary sinuses and the sphenoid sinus. The determined volumetric means were compared to previously published averages. Isometric CBCT-based volume determination results were closer to the real volume conditions, whereas the non-isometric CT-based volume measurements defined coherently lower volumes. By comparing the 2 volume measurement modes, the values gained from hand mode were closer to the literature data. Furthermore, CBCT-based image measurement results corresponded to the known averages. Our results suggest that CBCT images provide reliable volumetric information that can be depended on for artificial organ construction, and which may aid the guidance of the operator prior to or during the intervention.

  10. Creating advantages with franchising in healthcare: an explorative mixed methods study on the role of the relationship between the franchisor and units.

    Directory of Open Access Journals (Sweden)

    Karlijn Jojanneke Nijmeijer

    Full Text Available Franchising is a promising and increasingly used organizational form to improve strategic, organizational, professional and client-related results in healthcare. However, evidence is scarce regarding how franchises should be operated to actualize such results. This paper aimed to explore the association between the results achieved by healthcare franchises and the working relationships among actors in these franchises.A sequential mixed methods approach was used to obtain both in-depth and broader quantifiable insights into a little-investigated phenomenon. We first employed a qualitative multiple embedded case study. Data were collected through observations, document analyses, and 96 in-depth semi-structured interviews in three Dutch healthcare franchises. Within-case and cross-case comparative analyses were conducted. Subsequently, a cross-sectional survey was developed based on the qualitative study and disseminated among 19 healthcare franchises. 40 franchisors and 346 unit actors filled in the questionnaire.It seems important to have open, committed, cooperative franchise relationships in which professional franchisees and unit managers feel and trust that they have the opportunity to introduce ideas and articulate their needs to the franchisor. Such relationships help ensure satisfaction, survival, and quality of care, because they serve to foster synergy realization and local fit and prevent reinventing the wheel and professional resistance.

  11. Creating advantages with franchising in healthcare: an explorative mixed methods study on the role of the relationship between the franchisor and units.

    Science.gov (United States)

    Nijmeijer, Karlijn Jojanneke; Fabbricotti, Isabelle Natalina; Huijsman, Robbert

    2015-01-01

    Franchising is a promising and increasingly used organizational form to improve strategic, organizational, professional and client-related results in healthcare. However, evidence is scarce regarding how franchises should be operated to actualize such results. This paper aimed to explore the association between the results achieved by healthcare franchises and the working relationships among actors in these franchises. A sequential mixed methods approach was used to obtain both in-depth and broader quantifiable insights into a little-investigated phenomenon. We first employed a qualitative multiple embedded case study. Data were collected through observations, document analyses, and 96 in-depth semi-structured interviews in three Dutch healthcare franchises. Within-case and cross-case comparative analyses were conducted. Subsequently, a cross-sectional survey was developed based on the qualitative study and disseminated among 19 healthcare franchises. 40 franchisors and 346 unit actors filled in the questionnaire. It seems important to have open, committed, cooperative franchise relationships in which professional franchisees and unit managers feel and trust that they have the opportunity to introduce ideas and articulate their needs to the franchisor. Such relationships help ensure satisfaction, survival, and quality of care, because they serve to foster synergy realization and local fit and prevent reinventing the wheel and professional resistance.

  12. Data-based method for creating electricity use load profiles using large amount of customer-specific hourly measured electricity use data

    International Nuclear Information System (INIS)

    Raesaenen, Teemu; Voukantsis, Dimitrios; Niska, Harri; Karatzas, Kostas; Kolehmainen, Mikko

    2010-01-01

    The recent technological developments monitoring the electricity use of small customers provides with a whole new view to develop electricity distribution systems, customer-specific services and to increase energy efficiency. The analysis of customer load profile and load estimation is an important and popular area of electricity distribution technology and management. In this paper, we present an efficient methodology, based on self-organizing maps (SOM) and clustering methods (K-means and hierarchical clustering), capable of handling large amounts of time-series data in the context of electricity load management research. The proposed methodology was applied on a dataset consisting of hourly measured electricity use data, for 3989 small customers located in Northern-Savo, Finland. Information for the hourly electricity use, for a large numbers of small customers, has been made available only recently. Therefore, this paper presents the first results of making use of these data. The individual customers were classified into user groups based on their electricity use profile. On this basis, new, data-based load curves were calculated for each of these user groups. The new user groups as well as the new-estimated load curves were compared with the existing ones, which were calculated by the electricity company, on the basis of a customer classification scheme and their annual demand for electricity. The index of agreement statistics were used to quantify the agreement between the estimated and observed electricity use. The results indicate that there is a clear improvement when using data-based estimations, while the new-estimated load curves can be utilized directly by existing electricity power systems for more accurate load estimates.

  13. Data-based method for creating electricity use load profiles using large amount of customer-specific hourly measured electricity use data

    Energy Technology Data Exchange (ETDEWEB)

    Raesaenen, Teemu; Niska, Harri; Kolehmainen, Mikko [Department of Environmental Sciences, University of Eastern Finland P.O. Box 1627, FIN-70211 Kuopio (Finland); Voukantsis, Dimitrios; Karatzas, Kostas [Department of Mechanical Engineering, Aristotle University of Thessaloniki, GR-54124 Thessaloniki (Greece)

    2010-11-15

    The recent technological developments monitoring the electricity use of small customers provides with a whole new view to develop electricity distribution systems, customer-specific services and to increase energy efficiency. The analysis of customer load profile and load estimation is an important and popular area of electricity distribution technology and management. In this paper, we present an efficient methodology, based on self-organizing maps (SOM) and clustering methods (K-means and hierarchical clustering), capable of handling large amounts of time-series data in the context of electricity load management research. The proposed methodology was applied on a dataset consisting of hourly measured electricity use data, for 3989 small customers located in Northern-Savo, Finland. Information for the hourly electricity use, for a large numbers of small customers, has been made available only recently. Therefore, this paper presents the first results of making use of these data. The individual customers were classified into user groups based on their electricity use profile. On this basis, new, data-based load curves were calculated for each of these user groups. The new user groups as well as the new-estimated load curves were compared with the existing ones, which were calculated by the electricity company, on the basis of a customer classification scheme and their annual demand for electricity. The index of agreement statistics were used to quantify the agreement between the estimated and observed electricity use. The results indicate that there is a clear improvement when using data-based estimations, while the new-estimated load curves can be utilized directly by existing electricity power systems for more accurate load estimates. (author)

  14. Create Your Plate

    Medline Plus

    Full Text Available ... meal-planning, . In this section Food Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy Foods donate en -- A Future Without Diabetes - a-future-without-diabetes-2.html A Future ...

  15. Creating Customer Delight.

    Science.gov (United States)

    Black, Jim

    1995-01-01

    This article proposes that college admissions officers interested in improving service should focus on creating customer delight rather than simply satisfaction, studying the system when things go wrong rather than placing blame, establishing employee well-being as the highest priority of the organization, providing necessary tools and training…

  16. Create Your Plate

    Medline Plus

    Full Text Available ... tool is not to scale because of the differences in types of vegetables. When creating your plate ... function (data) { $('#survey-errors').remove(); $('.survey-form .form-group .survey-alert-wrap').remove(); if (data.submitSurveyResponse.success == ' ...

  17. Creating Pupils' Internet Magazine

    Science.gov (United States)

    Bognar, Branko; Šimic, Vesna

    2014-01-01

    This article presents an action research, which aimed to improve pupils' literary creativity and enable them to use computers connected to the internet. The study was conducted in a small district village school in Croatia. Creating a pupils' internet magazine appeared to be an excellent way for achieving the educational aims of almost all…

  18. Creating a Classroom Makerspace

    Science.gov (United States)

    Rivas, Luz

    2014-01-01

    What is a makerspace? Makerspaces are community-operated physical spaces where people (makers) create do-it-yourself projects together. These membership spaces serve as community labs where people learn together and collaborate on projects. Makerspaces often have tools and equipment like 3-D printers, laser cutters, and soldering irons.…

  19. Create Your Plate

    Medline Plus

    Full Text Available ... 1 Type 2 About Us Online Community Meal Planning Sign In Search: Search More Sites Search ≡ Are ... Fitness Home Food MyFoodAdvisor Recipes Association Cookbook Recipes Planning Meals Diabetes Meal Plans Create Your Plate Gluten ...

  20. Creating White Australia

    DEFF Research Database (Denmark)

    McLisky, Claire Louise; Carey, Jane

    Vedtagelsen af White Australien som regeringens politik i 1901 viser, at hvidheden var afgørende for den måde, hvorpå den nye nation i Australien blev konstitueret. Og alligevel har historikere i vid udstrækning overset hvidhed i deres studier af Australiens race fortid. 'Creating White Australia...

  1. Creating Innovative Opportunities

    DEFF Research Database (Denmark)

    Ljungberg, Daniel; McKelvey, Maureen; Lassen, Astrid Heidemann

    2012-01-01

    This paper develops lessons about how and why the founders and ventures involved in knowledge intensive entrepreneurship (KIE) manage the process of venture creation. The meta-analysis of the 86 case studies is based upon as conceptual model (from a systemic literature review), linked to illustra...... of knowledge networks to create innovative opportunities....

  2. Create Your State

    Science.gov (United States)

    Dunham, Kris; Melvin, Samantha

    2011-01-01

    Students are often encouraged to work together with their classmates, sometimes with other classes, occasionally with kids at other schools, but rarely with kids across the country. In this article the authors describe the Create Your State project, a collaborative nationwide project inspired by the Texas Chair Project wherein the artist, Damien…

  3. Creating a Third Culture

    Science.gov (United States)

    Weisbuch, Robert A.

    2008-01-01

    In this article, the author laments higher education's lack of concern towards the development of teaching in the public schools over the last half of the 20th century. Most of academe's work on the topic of teacher training has been done at the branches of state universities that needed to make money and create a niche. The author observes that…

  4. Prediction and typicality in multiverse cosmology

    International Nuclear Information System (INIS)

    Azhar, Feraz

    2014-01-01

    In the absence of a fundamental theory that precisely predicts values for observable parameters, anthropic reasoning attempts to constrain probability distributions over those parameters in order to facilitate the extraction of testable predictions. The utility of this approach has been vigorously debated of late, particularly in light of theories that claim we live in a multiverse, where parameters may take differing values in regions lying outside our observable horizon. Within this cosmological framework, we investigate the efficacy of top-down anthropic reasoning based on the weak anthropic principle. We argue contrary to recent claims that it is not clear one can either dispense with notions of typicality altogether or presume typicality, in comparing resulting probability distributions with observations. We show in a concrete, top-down setting related to dark matter, that assumptions about typicality can dramatically affect predictions, thereby providing a guide to how errors in reasoning regarding typicality translate to errors in the assessment of predictive power. We conjecture that this dependence on typicality is an integral feature of anthropic reasoning in broader cosmological contexts, and argue in favour of the explicit inclusion of measures of typicality in schemes invoking anthropic reasoning, with a view to extracting predictions from multiverse scenarios. (paper)

  5. Prediction and typicality in multiverse cosmology

    Science.gov (United States)

    Azhar, Feraz

    2014-02-01

    In the absence of a fundamental theory that precisely predicts values for observable parameters, anthropic reasoning attempts to constrain probability distributions over those parameters in order to facilitate the extraction of testable predictions. The utility of this approach has been vigorously debated of late, particularly in light of theories that claim we live in a multiverse, where parameters may take differing values in regions lying outside our observable horizon. Within this cosmological framework, we investigate the efficacy of top-down anthropic reasoning based on the weak anthropic principle. We argue contrary to recent claims that it is not clear one can either dispense with notions of typicality altogether or presume typicality, in comparing resulting probability distributions with observations. We show in a concrete, top-down setting related to dark matter, that assumptions about typicality can dramatically affect predictions, thereby providing a guide to how errors in reasoning regarding typicality translate to errors in the assessment of predictive power. We conjecture that this dependence on typicality is an integral feature of anthropic reasoning in broader cosmological contexts, and argue in favour of the explicit inclusion of measures of typicality in schemes invoking anthropic reasoning, with a view to extracting predictions from multiverse scenarios.

  6. What is typical is good: The influence of face typicality on perceived trustworthiness

    NARCIS (Netherlands)

    Sofer, C.; Dotsch, R.; Wigboldus, D.H.J.; Todorov, A.T.

    2015-01-01

    The role of face typicality in face recognition is well established, but it is unclear whether face typicality is important for face evaluation. Prior studies have focused mainly on typicality's influence on attractiveness, although recent studies have cast doubt on its importance for attractiveness

  7. Creating resilient SMEs

    DEFF Research Database (Denmark)

    Dahlberg, Rasmus; Guay, Fanny

    2015-01-01

    According to the EU, during the past five years, small and medium enterprises (SMEs) have created 85% of new jobs and two-thirds of private sector employment in the region. SMEs are considered the backbone of the economy in Europe and represent more than 95% of enterprises in USA and Australia....... They are considered more vulnerable to disasters because of their size. This paper argues, on the contrary, that SMEs also can be less vulnerable to sudden change than large corporations, drawing upon the ideas of Hayek and Taleb, and that networks of SMEs may contribute to the overall resilience of society...... if certain criteria are met. With this in mind, this paper will be examining how to create resilient SMEs. A well-known concept in the field is business continuity management. BCM is defined as “a holistic management process that identifies potential threats to an organization and the impacts to business...

  8. Effect of a typical rural processing method on the proximate ...

    African Journals Online (AJOL)

    ... among other natural boundaries in West Africa supply a massive amount of ... For instance Itugha known to be highly prized and delicious indigenous food is ... are facing extinction due to urbanization and increased patronage of fast foods, ...

  9. Creating flat design websites

    CERN Document Server

    Pratas, Antonio

    2014-01-01

    This book contains practical, step-by-step tutorials along with plenty of explanation about designing your flat website. Each section is introduced sequentially, building up your web design skills and completing your website.Creating Flat Design Websites is ideal for you if you are starting on your web development journey, but this book will also benefit seasoned developers wanting to start developing in flat.

  10. Method for creating and visualizing product architectures

    DEFF Research Database (Denmark)

    Kvist, Morten; Pedersen, Rasmus; Mortensen, Niels Henrik

    2005-01-01

    Over the past few decades the notion of product architectures in development has obtained increasing interest from many corporations conducting product development. Modular architectures and product platforms are often reported to have great potential to reduce internal complexity and total cost ...

  11. Creating a practice website.

    Science.gov (United States)

    Downes, P K

    2007-05-26

    A website is a window to the outside world. For a dental practice, it may be the first point of contact for a prospective new patient and will therefore provide them with their 'first impression'; this may be days or weeks before actually visiting the practice. This section considers the different ways of creating a dental practice website and lists some of the main dental website design companies. It also describes what factors make a successful website and offers advice on how to ensure that it complies with current regulations and recommendations.

  12. Identifying Typical Movements Among Indoor Objects

    DEFF Research Database (Denmark)

    Radaelli, Laura; Sabonis, Dovydas; Lu, Hua

    2013-01-01

    With the proliferation of mobile computing, positioning systems are becoming available that enable indoor location-based services. As a result, indoor tracking data is also becoming available. This paper puts focus on one use of such data, namely the identification of typical movement patterns...

  13. TYPICAL FORMS OF LIVER PATHOLOGY IN CHILDREN

    Directory of Open Access Journals (Sweden)

    Peter F. Litvitskiy

    2018-01-01

    Full Text Available This lecture for the system of postgraduate medical education analyzes causes, types, key links of pathogenesis, and manifestations of the main typical forms of liver pathology — liver failure, hepatic coma, jaundice, cholemia, acholia, cholelithiasis, and their complications in children. To control the retention of the lecture material, case problems and multiple-choice tests are given.

  14. Typical electric bills, January 1, 1981

    International Nuclear Information System (INIS)

    1981-01-01

    The Typical Electric Bills report is prepared by the Electric Power Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration; Department of Energy. The publication is geared to a variety of applications by electric utilities, industry, consumes, educational institutions, and government in recognition of the growing importance of energy planning in contemporary society. 19 figs., 18 tabs

  15. Creating corporate advantage.

    Science.gov (United States)

    Collis, D J; Montgomery, C A

    1998-01-01

    What differentiates truly great corporate strategies from the merely adequate? How can executives at the corporate level create tangible advantage for their businesses that makes the whole more than the sum of the parts? This article presents a comprehensive framework for value creation in the multibusiness company. It addresses the most fundamental questions of corporate strategy: What businesses should a company be in? How should it coordinate activities across businesses? What role should the corporate office play? How should the corporation measure and control performance? Through detailed case studies of Tyco International, Sharp, the Newell Company, and Saatchi and Saatchi, the authors demonstrate that the answers to all those questions are driven largely by the nature of a company's special resources--its assets, skills, and capabilities. These range along a continuum from the highly specialized at one end to the very general at the other. A corporation's location on the continuum constrains the set of businesses it should compete in and limits its choices about the design of its organization. Applying the framework, the authors point out the common mistakes that result from misaligned corporate strategies. Companies mistakenly enter businesses based on similarities in products rather than the resources that contribute to competitive advantage in each business. Instead of tailoring organizational structures and systems to the needs of a particular strategy, they create plain-vanilla corporate offices and infrastructures. The company examples demonstrate that one size does not fit all. One can find great corporate strategies all along the continuum.

  16. Creating sustainable performance.

    Science.gov (United States)

    Spreitzer, Gretchen; Porath, Christine

    2012-01-01

    What makes for sustainable individual and organizational performance? Employees who are thriving-not just satisfied and productive but also engaged in creating the future. The authors found that people who fit this description demonstrated 16% better overall performance, 125% less burnout, 32% more commitment to the organization, and 46% more job satisfaction than their peers. Thriving has two components: vitality, or the sense of being alive and excited, and learning, or the growth that comes from gaining knowledge and skills. Some people naturally build vitality and learning into their jobs, but most employees are influenced by their environment. Four mechanisms, none of which requires heroic effort or major resources, create the conditions for thriving: providing decision-making discretion, sharing information about the organization and its strategy, minimizing incivility, and offering performance feedback. Organizations such as Alaska Airlines, Zingerman's, Quicken Loans, and Caiman Consulting have found that helping people grow and remain energized at work is valiant on its own merits-but it can also boost performance in a sustainable way.

  17. Entropy and the Typicality of Universes

    OpenAIRE

    Barbour, Julian; Koslowski, Tim; Mercati, Flavio

    2015-01-01

    The universal validity of the second law of thermodynamics is widely attributed to a finely tuned initial condition of the universe. This creates a problem: why is the universe atypical? We suggest that the problem is an artefact created by inappropriate transfer of the traditional concept of entropy to the whole universe. Use of what we call the relational $N$-body problem as a model indicates the need to employ two distinct entropy-type concepts to describe the universe. One, which we call ...

  18. Rural Tourism and Local Development: Typical Productions of Lazio

    Directory of Open Access Journals (Sweden)

    Francesco Maria Olivieri

    2014-12-01

    Full Text Available The local development is based on the integration of the tourism sector with the whole economy. The rural tourism seems to be a good occasion to analyse the local development: consumption of "tourist products" located in specific local contexts. Starting from the food and wine supply chain and the localization of typical productions, the aim of the present work will be analyse the relationship with local development, rural tourism sustainability and accommodation system, referring to Lazio. Which are the findings to create tourism local system based on the relationship with touristic and food and wine supply chain? Italian tourism is based on accommodation system, so the whole consideration of the Italian cultural tourism: tourism made in Italy. The touristic added value to specific local context takes advantage from the synergy with food and wine supply chain: made in Italy of typical productions. Agritourism could be better accommodation typology to rural tourism and to exclusivity of consumption typical productions. The reciprocity among food and wine supply chain and tourism provides new insights on the key topics related to tourism development and to the organization of geographical space as well and considering its important contribution nowadays to the economic competitiveness.

  19. Creating a digital medical illustration.

    Science.gov (United States)

    Culley, Joanna

    2016-01-01

    This paper covers the steps required to complete a medical illustration in a digital format using Adobe Illustrator and Photoshop. The project example is the surgical procedure for the release of the glenohumeral joint for the condition known as 'frozen shoulder'. The purpose is to demonstrate one method which an artist can use within digital media to create a colour illustration such as the release of the glenohumeral joint. Included is a general overview as how to deal with the administration of a medical illustration commission through the experience of a professional freelance artist.

  20. Creating With Carbon

    Science.gov (United States)

    2003-01-01

    A subsidiary of SI Diamond Technology, Inc., Applied Nanotech, of Austin, Texas, is creating a buzz among various technology firms and venture capital groups interested in the company s progressive research on carbon-related field emission devices, including carbon nanotubes, filaments of pure carbon less than one ten-thousandth the width of human hair. Since their discovery in 1991, carbon nanotubes have gained considerable attention due to their unique physical properties. For example, a single perfect carbon nanotube can range from 10 to 100 times stronger than steel, per unit weight. Recent studies also indicate that the nanotubes may be the best heat-conducting material in existence. These properties, combined with the ease of growing thin films or nanotubes by a variety of deposition techniques, make the carbon-based material one of the most desirable for cold field emission cathodes.

  1. Generation of a typical meteorological year for Hong Kong

    International Nuclear Information System (INIS)

    Chan, Apple L.S.; Chow, T.T.; Fong, Square K.F.; Lin, John Z.

    2006-01-01

    Weather data can vary significantly from year to year. There is a need to derive typical meteorological year (TMY) data to represent the long-term typical weather condition over a year, which is one of the crucial factors for successful building energy simulation. In this paper, various types of typical weather data sets including the TMY, TMY2, WYEC, WYEC2, WYEC2W, WYEC2T and IWEC were reviewed. The Finkelstein-Schafer statistical method was applied to analyze the hourly measured weather data of a 25-year period (1979-2003) in Hong Kong and select representative typical meteorological months (TMMs). The cumulative distribution function (CDF) for each year was compared with the CDF for the long-term composite of all the years in the period for four major weather indices including dry bulb temperature, dew point temperature, wind speed and solar radiation. Typical months for each of the 12 calendar months from the period of years were selected by choosing the one with the smallest deviation from the long-term CDF. The 12 TMMs selected from the different years were used for formulation of a TMY for Hong Kong

  2. Herpes zoster - typical and atypical presentations.

    Science.gov (United States)

    Dayan, Roy Rafael; Peleg, Roni

    2017-08-01

    Varicella- zoster virus infection is an intriguing medical entity that involves many medical specialties including infectious diseases, immunology, dermatology, and neurology. It can affect patients from early childhood to old age. Its treatment requires expertise in pain management and psychological support. While varicella is caused by acute viremia, herpes zoster occurs after the dormant viral infection, involving the cranial nerve or sensory root ganglia, is re-activated and spreads orthodromically from the ganglion, via the sensory nerve root, to the innervated target tissue (skin, cornea, auditory canal, etc.). Typically, a single dermatome is involved, although two or three adjacent dermatomes may be affected. The lesions usually do not cross the midline. Herpes zoster can also present with unique or atypical clinical manifestations, such as glioma, zoster sine herpete and bilateral herpes zoster, which can be a challenging diagnosis even for experienced physicians. We discuss the epidemiology, pathophysiology, diagnosis and management of Herpes Zoster, typical and atypical presentations.

  3. Metabolic disorders with typical alterations in MRI

    International Nuclear Information System (INIS)

    Warmuth-Metz, M.

    2010-01-01

    The classification of metabolic disorders according to the etiology is not practical for neuroradiological purposes because the underlying defect does not uniformly transform into morphological characteristics. Therefore typical MR and clinical features of some easily identifiable metabolic disorders are presented. Canavan disease, Pelizaeus-Merzbacher disease, Alexander disease, X-chromosomal adrenoleukodystrophy and adrenomyeloneuropathy, mitochondrial disorders, such as MELAS (mitochondrial encephalopathy, lactic acidosis, and stroke-like episodes) and Leigh syndrome as well as L-2-hydroxyglutaric aciduria are presented. (orig.) [de

  4. [Typical atrial flutter: Diagnosis and therapy].

    Science.gov (United States)

    Thomas, Dierk; Eckardt, Lars; Estner, Heidi L; Kuniss, Malte; Meyer, Christian; Neuberger, Hans-Ruprecht; Sommer, Philipp; Steven, Daniel; Voss, Frederik; Bonnemeier, Hendrik

    2016-03-01

    Typical, cavotricuspid-dependent atrial flutter is the most common atrial macroreentry tachycardia. The incidence of atrial flutter (typical and atypical forms) is age-dependent with 5/100,000 in patients less than 50 years and approximately 600/100,000 in subjects > 80 years of age. Concomitant heart failure or pulmonary disease further increases the risk of typical atrial flutter.Patients with atrial flutter may present with symptoms of palpitations, reduced exercise capacity, chest pain, or dyspnea. The risk of thromboembolism is probably similar to atrial fibrillation; therefore, the same antithrombotic prophylaxis is required in atrial flutter patients. Acutely symptomatic cases may be subjected to cardioversion or pharmacologic rate control to relieve symptoms. Catheter ablation of the cavotricuspid isthmus represents the primary choice in long-term therapy, associated with high procedural success (> 97 %) and low complication rates (0.5 %).This article represents the third part of a manuscript series designed to improve professional education in the field of cardiac electrophysiology. Mechanistic and clinical characteristics as well as management of isthmus-dependent atrial flutter are described in detail. Electrophysiological findings and catheter ablation of the arrhythmia are highlighted.

  5. Comparison of allele-specific PCR, created restriction-site PCR, and PCR with primer-introduced restriction analysis methods used for screening complex vertebral malformation carriers in Holstein cattle

    Science.gov (United States)

    Altınel, Ahmet

    2017-01-01

    Complex vertebral malformation (CVM) is an inherited, autosomal recessive disorder of Holstein cattle. The aim of this study was to compare sensitivity, specificity, positive and negative predictive values, accuracy, and rapidity of allele-specific polymerase chain reaction (AS-PCR), created restriction-site PCR (CRS-PCR), and PCR with primer-introduced restriction analysis (PCR-PIRA), three methods used in identification of CVM carriers in a Holstein cattle population. In order to screen for the G>T mutation in the solute carrier family 35 member A3 (SLC35A3) gene, DNA sequencing as the gold standard method was used. The prevalence of carriers and the mutant allele frequency were 3.2% and 0.016, respectively, among Holstein cattle in the Thrace region of Turkey. Among the three methods, the fastest but least accurate was AS-PCR. Although the rapidity of CRS-PCR and PCR-PIRA were nearly equal, the accuracy of PCR-PIRA was higher than that of CRS-PCR. Therefore, among the three methods, PCR-PIRA appears to be the most efficacious for screening of mutant alleles when identifying CVM carriers in a Holstein cattle population. PMID:28927256

  6. What Is Typical Is Good : The Influence of Face Typicality on Perceived Trustworthiness

    NARCIS (Netherlands)

    Sofer, Carmel; Dotsch, Ron; Wigboldus, Daniel H J; Todorov, Alexander

    2015-01-01

    The role of face typicality in face recognition is well established, but it is unclear whether face typicality is important for face evaluation. Prior studies have focused mainly on typicality’s influence on attractiveness, although recent studies have cast doubt on its importance for attractiveness

  7. Creating nanoscale emulsions using condensation.

    Science.gov (United States)

    Guha, Ingrid F; Anand, Sushant; Varanasi, Kripa K

    2017-11-08

    Nanoscale emulsions are essential components in numerous products, ranging from processed foods to novel drug delivery systems. Existing emulsification methods rely either on the breakup of larger droplets or solvent exchange/inversion. Here we report a simple, scalable method of creating nanoscale water-in-oil emulsions by condensing water vapor onto a subcooled oil-surfactant solution. Our technique enables a bottom-up approach to forming small-scale emulsions. Nanoscale water droplets nucleate at the oil/air interface and spontaneously disperse within the oil, due to the spreading dynamics of oil on water. Oil-soluble surfactants stabilize the resulting emulsions. We find that the oil-surfactant concentration controls the spreading behavior of oil on water, as well as the peak size, polydispersity, and stability of the resulting emulsions. Using condensation, we form emulsions with peak radii around 100 nm and polydispersities around 10%. This emulsion formation technique may open different routes to creating emulsions, colloidal systems, and emulsion-based materials.

  8. Creating an effective poster presentation.

    Science.gov (United States)

    Taggart, H M; Arslanian, C

    2000-01-01

    One way to build knowledge in nursing is to share research findings or clinical program outcomes. The dissemination of these findings is often a difficult final step in a project that has taken months or years to complete. One method of sharing findings in a relaxed and informal setting is a poster presentation. This method is an effective form for presenting findings using an interactive approach. The milieu of a poster presentation enables the presenters to interact and dialogue with colleagues. Guidelines for size and format require that the poster is clear and informative. Application of design helps to create visually appealing posters. This article summarizes elements of designing and conducting a poster presentation.

  9. Create Your Plate

    Medline Plus

    Full Text Available ... a simple and effective way to manage your blood glucose levels and lose weight. With this method, you fill ... .survey-alert-wrap').remove(); if (data.submitSurveyResponse.success == ' ...

  10. Create Your Plate

    Medline Plus

    Full Text Available ... Children and Type 2 Diabetes Know Your Rights Employment Discrimination Health Care Professionals Law Enforcement Driver's License ... blood glucose levels and lose weight. With this method, you fill your plate with more non-starchy ...

  11. Create Your Plate

    Medline Plus

    Full Text Available ... diabetes. Other Ways to Give Become a Member Vehicle Donation Planned Giving Options Memorial Giving Brochures & Envelopes ... to manage your blood glucose levels and lose weight. With this method, you fill your plate with ...

  12. Create Your Plate

    Medline Plus

    Full Text Available ... Know Your Rights Employment Discrimination Health Care Professionals Law Enforcement Driver's License For Lawyers Food & Fitness Home ... and effective way to manage your blood glucose levels and lose weight. With this method, you fill ...

  13. Create Your Plate

    Medline Plus

    Full Text Available ... Count Glycemic Index Low-Calorie Sweeteners Sugar and Desserts Fitness Exercise & Type 1 Diabetes Get Started Safely ... blood glucose levels and lose weight. With this method, you fill your plate with more non-starchy ...

  14. Creating Magic Squares.

    Science.gov (United States)

    Lyon, Betty Clayton

    1990-01-01

    One method of making magic squares using a prolongated square is illustrated. Discussed are third-order magic squares, fractional magic squares, fifth-order magic squares, decimal magic squares, and even magic squares. (CW)

  15. Create Your Plate

    Medline Plus

    Full Text Available ... Easy Advocacy Checklists for Association Events Messaging Tools Recruiting Advocates Local Market Planning Training Webinars News & Events ... blood glucose levels and lose weight. With this method, you fill your plate with more non-starchy ...

  16. Create Your Plate

    Medline Plus

    Full Text Available ... blood glucose levels and lose weight. With this method, you fill your plate with more non-starchy ... Complications Health Insurance For Parents & Kids Know Your Rights We Can Help Enroll in the Living WIth ...

  17. Create Your Plate

    Medline Plus

    Full Text Available ... blood glucose levels and lose weight. With this method, you fill your plate with more non-starchy ... today and help fund grants supporting next generation scientists. Donate Today We Can Help - we-can-help. ...

  18. Creating an outcomes framework.

    Science.gov (United States)

    Doerge, J B

    2000-01-01

    Four constructs used to build a framework for outcomes management for a large midwestern tertiary hospital are described in this article. A system framework outlining a model of clinical integration and population management based in Steven Shortell's work is discussed. This framework includes key definitions of high-risk patients, target groups, populations and community. Roles for each level of population management and how they were implemented in the health care system are described. A point of service framework centered on seven dimensions of care is the next construct applied on each nursing unit. The third construct outlines the framework for role development. Three roles for nursing were created to implement strategies for target groups that are strategic disease categories; two of those roles are described in depth. The philosophy of nursing practice is centered on caring and existential advocacy. The final construct is the modification of the Dartmouth model as a common framework for outcomes. System applications of the scorecard and lessons learned in the 2-year process of implementation are shared

  19. Creating a disability mythology.

    Science.gov (United States)

    Brown, S E

    1992-01-01

    People with disabilities have, for the most part, failed to identify with each other as a group. This has been detrimental because it has built a sense of isolation when a camaraderie based upon existing commonalities could have been developed. During the past ten to twenty years, there has been a great deal of discussion about appropriate language to use when discussing disability issues. This discussion has been a part of a larger debate concerning the existence of a disability culture. I believe that there is indeed a disability culture and I am a proponent of identifying and passing on stories which contribute to that culture. I have chosen to use mythology to convey this message and have begun with a focus on heroes - people who do something out of the ordinary. It is contended that almost all people with disabilities have performed heroic activities because of the pervasive discrimination encountered by each individual with a disability. Creating a disability mythology is an attempt to recognize and promote heroes within the disabled community and to advocate the importance of telling other people how positive change has occurred through instances of individual heroism.

  20. Anatomo-clinical overlapping maps (AnaCOM): a new method to create anatomo-functional maps from neuropsychological tests and structural MRI scan of subjects with brain lesions

    Science.gov (United States)

    Kinkingnehun, Serge R. J.; du Boisgueheneuc, Foucaud; Golmard, Jean-Louis; Zhang, Sandy X.; Levy, Richard; Dubois, Bruno

    2004-04-01

    We have developed a new technique to analyze correlations between brain anatomy and its neurological functions. The technique is based on the anatomic MRI of patients with brain lesions who are administered neuropsychological tests. Brain lesions of the MRI scans are first manually segmented. The MRI volumes are then normalized to a reference map, using the segmented area as a mask. After normalization, the brain lesions of the MRI are segmented again in order to redefine the border of the lesions in the context of the normalized brain. Once the MRI is segmented, the patient's score on the neuropsychological test is assigned to each voxel in the lesioned area, while the rest of the voxels of the image are set to 0. Subsequently, the individual patient's MRI images are superimposed, and each voxel is reassigned the average score of the patients who have a lesion at that voxel. A threshold is applied to remove regions having less than three overlaps. This process leads to an anatomo-functional map that links brain areas to functional loss. Other maps can be created to aid in analyzing the functional maps, such as one that indicates the 95% confidence interval of the averaged scores for each area. This anatomo-clinical overlapping map (AnaCOM) method was used to obtain functional maps from patients with lesions in the superior frontal gyrus. By finding particular subregions more responsible for a particular deficit, this method can generate new hypotheses to be tested by conventional group methods.

  1. Group typicality, group loyalty and cognitive development.

    Science.gov (United States)

    Patterson, Meagan M

    2014-09-01

    Over the course of childhood, children's thinking about social groups changes in a variety of ways. Developmental Subjective Group Dynamics (DSGD) theory emphasizes children's understanding of the importance of conforming to group norms. Abrams et al.'s study, which uses DSGD theory as a framework, demonstrates the social cognitive skills underlying young elementary school children's thinking about group norms. Future research on children's thinking about groups and group norms should explore additional elements of this topic, including aspects of typicality beyond loyalty. © 2014 The British Psychological Society.

  2. Modelling object typicality in description logics

    CSIR Research Space (South Africa)

    Britz, K

    2009-12-01

    Full Text Available in the context under consideration, than those lower down. For any given class C, we assume that all objects in the appli- cation domain that are in (the interpretation of) C are more typical of C than those not in C. This is a technical construction which... to be modular partial orders, i.e. reflexive, transitive, anti- symmetric relations such that, for all a, b, c in ∆I , if a and b are incomparable and a is strictly below c, then b is also strictly below c. Modular partial orders have the effect...

  3. Benchmark calculation programme concerning typical LMFBR structures

    International Nuclear Information System (INIS)

    Donea, J.; Ferrari, G.; Grossetie, J.C.; Terzaghi, A.

    1982-01-01

    This programme, which is part of a comprehensive activity aimed at resolving difficulties encountered in using design procedures based on ASME Code Case N-47, should allow to get confidence in computer codes which are supposed to provide a realistic prediction of the LMFBR component behaviour. The calculations started on static analysis of typical structures made of non linear materials stressed by cyclic loads. The fluid structure interaction analysis is also being considered. Reasons and details of the different benchmark calculations are described, results obtained are commented and future computational exercise indicated

  4. Typical skeletal changes due to metastasising neuroblastomas

    International Nuclear Information System (INIS)

    Eggerath, A.; Persigehl, M.; Mertens, R.; Technische Hochschule Aachen

    1983-01-01

    Compared with other solid tumours in childhood, neuroblastomas show a marked tendency to metastasise to the skeleton. The differentiation of these lesions from inflammatory and other malignant bone lesions in this age group is often difficult. The radiological findings in ten patients with metastasing and histologically confirmed neuroblastomas have been reviewed and the typical appearances in the skeleton are described. The most important features in the differential diagnosies are discussed and the significance of bone changes in the diagnosis of neuroblastoma have been evaluated. (orig.) [de

  5. Typical load shapes for six categories of Swedish commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    Noren, C.

    1997-01-01

    In co-operation with several Swedish electricity suppliers, typical load shapes have been developed for six categories of commercial buildings located in the south of Sweden. The categories included in the study are: hotels, warehouses/grocery stores, schools with no kitchen, schools with kitchen, office buildings, health, health buildings. Load shapes are developed for different mean daily outdoor temperatures and for different day types, normally standard weekdays and standard weekends. The load shapes are presented as non-dimensional normalized 1-hour load. All measured loads for an object are divided by the object`s mean load during the measuring period and typical load shapes are developed for each category of buildings. Thus errors were kept lower as compared to use of W/m{sup 2}-terms. Typical daytime (9 a.m. - 5 p.m.) standard deviations are 7-10% of the mean values for standard weekdays but during very cold or warm weather conditions, single objects can deviate from the typical load shape. On weekends, errors are higher and depending on very different activity levels in the buildings, it is difficult to develop weekend load shapes with good accuracy. The method presented is very easy to use for similar studies and no building simulation programs are needed. If more load data is available, a good method to lower the errors is to make sure that every category only consists of objects with the same activity level, both on weekdays and weekends. To make it easier to use the load shapes, Excel load shape workbooks have been developed, where it is even possible to compare typical load shapes with measured data. 23 refs, 53 figs, 20 tabs

  6. Creating Tension in Writing.

    Science.gov (United States)

    Folta, Bernarr

    This paper discusses the rationale and teaching methods for a six-week unit, for a high school freshman English Class, on perception, semantics, and writing, which places special focus on developing tension in student writing. The first four objectives of the course focus on perception and the next two focus on semantics. The seventh…

  7. Tourist-created Content

    DEFF Research Database (Denmark)

    Munar, Ana Maria

    2011-01-01

    study of social media sites and destination brands, relying on qualitative research methods, content analysis and field research. Findings – Tourists are largely contributing to destination image formation, while avoiding the use of the formal elements of the brands. The most popular strategies used...

  8. Create Your Plate

    Medline Plus

    Full Text Available ... tax-deductible gift today can fund critical diabetes research and support vital diabetes education services that improve the ... effective way to manage your blood glucose levels and lose weight. With this method, you fill your plate with more non-starchy ...

  9. Creating a Social World

    Science.gov (United States)

    Kendler, Kenneth S.; Jacobson, Kristen C.; Gardner, Charles O.; Gillespie, Nathan; Aggen, Steven A.; Prescott, Carol A.

    2014-01-01

    Context Peer-group deviance is strongly associated with externalizing behaviors. We have limited knowledge of the sources of individual differences in peer-group deviance. Objective To clarify genetic and environmental contributions to peer-group deviance in twins from mid-childhood through early adulthood. Design Retrospective assessments using a life-history calendar. Analysis by biometric growth curves. Setting General community. Participants Members of male-male pairs from the population-based Virginia Twin Registry personally interviewed in 1998–2004 (n=1802). Main Outcome Measure Self-reported peer-group deviance at ages 8 to 11, 12 to 14, 15 to 17, 18 to 21, and 22 to 25 years. Results Mean and variance of peer-group deviance increased substantially with age. Genetic effects on peer-group deviance showed a strong and steady increase over time. Family environment generally declined in importance over time. Individual-specific environmental influences on peer-group deviance levels were stable in the first 3 age periods and then increased as most twins left home. When standardized, the heritability of peer-group deviance is approximately 30% at ages 8 to 11 years and rises to approximately 50% across the last 3 time periods. Both genes and shared environment contributed to individual differences in the developmental trajectory of peer-group deviance. However, while the correlation between childhood peer-group deviance levels and the subsequent slope of peer-group deviance over time resulting from genetic factors was positive, the same relationship resulting from shared environmental factors was negative. Conclusions As male twins mature and create their own social worlds, genetic factors play an increasingly important role in their choice of peers, while shared environment becomes less influential. The individual specific environment increases in importance when individuals leave home. Individuals who have deviant peers in childhood, as a result of genetic vs

  10. Creating a family health history

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000947.htm Creating a family health history To use the sharing ... Many health problems tend to run in families. Creating a family history can help you and your ...

  11. Hydrogen deflagration simulations under typical containment conditions for nuclear safety

    Energy Technology Data Exchange (ETDEWEB)

    Yanez, J., E-mail: jorge.yanez@kit.edu [Institute for Energy and Nuclear Technology, Karlsruhe Institute of Technology, Kaiserstrasse 12, 76131 Karlsruhe (Germany); Kotchourko, A.; Lelyakin, A. [Institute for Energy and Nuclear Technology, Karlsruhe Institute of Technology, Kaiserstrasse 12, 76131 Karlsruhe (Germany)

    2012-09-15

    Highlights: Black-Right-Pointing-Pointer Lean H{sub 2}-air combustion experiments highly relevant to typical NPP simulated. Black-Right-Pointing-Pointer Analyzed effect of temperature, concentration of H{sub 2}, and steam concentration. Black-Right-Pointing-Pointer Similar conditions and H{sub 2} concentration yielded different combustion regimes. Black-Right-Pointing-Pointer Flame instabilities (FIs) were the effect driving divergences. Black-Right-Pointing-Pointer Model developed for acoustic FI in simulations. Agreement experiments obtained. - Abstract: This paper presents the modeling of low-concentration hydrogen deflagrations performed with the recently developed KYLCOM model specially created to perform calculations in large scale domains. Three experiments carried out in THAI facility (performed in the frames of international OECD THAI experimental program) were selected to be analyzed. The tests allow studying lean mixture hydrogen combustion at normal ambient, elevated temperature and superheated and saturated conditions. The experimental conditions considered together with the facility size and shape grant a high relevance degree to the typical NPP containment conditions. The results of the simulations were thoroughly compared with the experimental data, and the comparison was supplemented by the analysis of the combustion regimes taking place in the considered tests. Results of the analysis demonstrated that despite the comparatively small difference in mixture properties, three different combustion regimes can be definitely identified. The simulations of one of the cases required of the modeling of the acoustic-parametric instability which was carefully undertaken.

  12. Creating Future Memories: A Dialogue on Process

    DEFF Research Database (Denmark)

    Rehder, Mads Middelboe

    2016-01-01

    This contribution documents the generative method we used to create a two-day public workshop on archiving digital memory, which occurred in April 2016 at the Counterplay Festival in Aarhus. Our group members, collectively known as the Futuremaking group created two distinct experiences. The “Help...... Desk of the Future” was created as a means of acting out how unhelpful many helpdesks actually are and to imagine how algorithms may be positioning our futures for us. The Museum of Random Memory functioned as a pop-up curatorial event where participants could offer up memories, experiences...

  13. A method to study the characteristics of 3D dose distributions created by superposition of many intensity-modulated beams delivered via a slit aperture with multiple absorbing vanes

    International Nuclear Information System (INIS)

    Webb, S.; Oldham, M.

    1996-01-01

    Highly conformal dose distributions can be created by the superposition of many radiation fields from different directions, each with its intensity spatially modulated by the method known as tomotherapy. At the planning stage, the intensity of radiation of each beam element (or bixel) is determined by working out the effect of superposing the radiation through all bixels with the elemental dose distribution specified as that from a single bixel with all its neighbours closed (the 'independent-vane' (IV) model). However, at treatment-delivery stage, neighbouring bixels may not be closed. Instead the slit beam is delivered with parts of the beam closed for different periods of time to create the intensity modulation. As a result, the 3D dose distribution actually delivered will differ from that determined at the planning stage if the elemental beams do not obey the superposition principle. The purpose of this paper is to present a method to investigate and quantify the relation between planned and delivered 3D dose distributions. Two modes of inverse planning have been performed: (i) with a fit to the measured elemental dose distribution and (ii) with a 'stretched fit' obeying the superposition principle as in the PEACOCK 3D planning system. The actual delivery has been modelled as a series of component deliveries (CDs). The algorithm for determining the component intensities and the appropriate collimation conditions is specified. The elemental beam from the NOMOS MIMiC collimator is too narrow to obey the superposition principle although it can be 'stretched' and fitted to a superposition function. Hence there are differences between the IV plans made using modes (i) and (ii) and the raw and the stretched elemental beam, and also differences with CD delivery. This study shows that the differences between IV and CD dose distributions are smaller for mode (ii) inverse planning than for mode (i), somewhat justifying the way planning is done within PEACOCK. Using a

  14. Identifying typical patterns of vulnerability: A 5-step approach based on cluster analysis

    Science.gov (United States)

    Sietz, Diana; Lüdeke, Matthias; Kok, Marcel; Lucas, Paul; Carsten, Walther; Janssen, Peter

    2013-04-01

    Specific processes that shape the vulnerability of socio-ecological systems to climate, market and other stresses derive from diverse background conditions. Within the multitude of vulnerability-creating mechanisms, distinct processes recur in various regions inspiring research on typical patterns of vulnerability. The vulnerability patterns display typical combinations of the natural and socio-economic properties that shape a systems' vulnerability to particular stresses. Based on the identification of a limited number of vulnerability patterns, pattern analysis provides an efficient approach to improving our understanding of vulnerability and decision-making for vulnerability reduction. However, current pattern analyses often miss explicit descriptions of their methods and pay insufficient attention to the validity of their groupings. Therefore, the question arises as to how do we identify typical vulnerability patterns in order to enhance our understanding of a systems' vulnerability to stresses? A cluster-based pattern recognition applied at global and local levels is scrutinised with a focus on an applicable methodology and practicable insights. Taking the example of drylands, this presentation demonstrates the conditions necessary to identify typical vulnerability patterns. They are summarised in five methodological steps comprising the elicitation of relevant cause-effect hypotheses and the quantitative indication of mechanisms as well as an evaluation of robustness, a validation and a ranking of the identified patterns. Reflecting scale-dependent opportunities, a global study is able to support decision-making with insights into the up-scaling of interventions when available funds are limited. In contrast, local investigations encourage an outcome-based validation. This constitutes a crucial step in establishing the credibility of the patterns and hence their suitability for informing extension services and individual decisions. In this respect, working at

  15. Creating responsible partnerships in tourism

    Directory of Open Access Journals (Sweden)

    Ana Spitzer

    2012-06-01

    Full Text Available RQ: Organisations do not provide sufficient time and effort to seek out companies for partners that would, with the assistance of responsible cooperation, contribute to better quality offers and consequently to increased income and the good reputation of both companies. Responsibilities and ethics is where organizations on bothsides would take on and accept their own norms, tasks, obligations and be aware that in a relationship there is a need to give explanations and justify one’s actions, such partnerships will be long and prosperous. This requires a great deal of knowledge and maturity together with a very important personal characteristic that is care. This study examines whether the creation of long term partnerships through responsible and more personal (friendlyrelations brings the organization to greater success.Purpose: The purpose of this research is to determine how important it is for organizations in the tourism industry to build long term relationships, what it should be based on and whether companies are willing to change the current methods of operations.Method: The method of research was an interview with individuals that had a certain position within a tourism company and had contacts with partners and were obligated to see out new ones. A paradigm model was built and the responses analysed.Results: The survey results are encouraging. The interviews showed that respondents were aware that it is necessary to have long term and responsible partnerships. They recognized that in today’s world there is a lack of collaboration that is based on understanding andthat there should be more relations on a personal level. It isrequired that this changes in the future. The participants specifically highlight financial irresponsibility in many companies that destroys collaboration.Organization: With the help of this study, the author attempts to contribute ideas to organizations on how to create solid collaboration with partners, as

  16. Typical and atypical presentations of aspergilloma

    International Nuclear Information System (INIS)

    Villajos, M.; Darnell, A.; Gallardo, X.; Castaner, E.; Mata, J. M.; Paedavila, E.

    1999-01-01

    To show the different forms of radiological presentations of aspergilloma, emphasizing the importance of recognizing the atypical forms. The explorations of 11 patients with aspergilloma were examined retrospectively between 1993 and 1997. These patients were studied using conventional X-rays and computed tomography (CT): Typical and atypical radiological findings were observed. In two patients, who presented recurrent hemoptysis, a percutaneous installation of amphotericin B was carried out with tomographic control. Out of the 11 patients, two were female and nine male. In eight of the cases the radiological findings showed an intercavity injury with different evolutionary forms, while in three of the cases there was a progressive pleural swelling. In the two patients treated pertinaciously, no significant radiological changes were observed, however, neither of them showed hemoptysis again. The pleural swelling adjacent to the cavity and/or the swelling of the cavity wall are atypical radiological presentations of the aspergilloma, that can accompany or precede the appearance of this illness. (Author) 7 refs

  17. Idiopathic intracranial hypertension: A typical presentation

    International Nuclear Information System (INIS)

    Algahtani, Hussein A.; Obeid, Tahir H.; Abuzinadah, Ahmad R.; Baeesa, Saleh S.

    2007-01-01

    Objective was to describe the clinical features of 5 patients with rare atypical presentation of idiopathic intracranial hypertension (IIH), and propose the possible mechanism of this atypical presentation. We carried out a retrospective study of 5 patients, admitted at King Khalid National Guard Hospital, Jeddah, Kingdom of Saudi Arabia with IIH during the period from January 2001 to December 2005. All were females with their age ranges from 24 to 40 years. The clinical presentations, the laboratory and imaging studies were analyzed. The opening pressures of the lumbar puncture tests were documented. All patients were presented with headache. One had typical pain of trigeminal neuralgia and one with neck pain and radiculopathy. Facial diplegia was present in one patient and two patients had bilateral 6th cranial neuropathy. Papilledema was present in all patients except in one patient. Imaging study was normal in all patients, and they had a very high opening pressure during lumbar puncture, except in one patient. All patients achieved full recovery with medical therapy in 6 to 12 weeks with no relapse during the mean follow up of 2 years. Atypical finding in IIH are rare and require a high index of suspicion for early diagnosis. (author)

  18. Creating breakthroughs at 3M.

    Science.gov (United States)

    von Hippel, E; Thomke, S; Sonnack, M

    1999-01-01

    Most senior managers want their product development teams to create break-throughs--new products that will allow their companies to grow rapidly and maintain high margins. But more often they get incremental improvements to existing products. That's partly because companies must compete in the short term. Searching for breakthroughs is expensive and time consuming; line extensions can help the bottom line immediately. In addition, developers simply don't know how to achieve breakthroughs, and there is usually no system in place to guide them. By the mid-1990s, the lack of such a system was a problem even for an innovative company like 3M. Then a project team in 3M's Medical-Surgical Markets Division became acquainted with a method for developing breakthrough products: the lead user process. The process is based on the fact that many commercially important products are initially thought of and even prototyped by "lead users"--companies, organizations, or individuals that are well ahead of market trends. Their needs are so far beyond those of the average user that lead users create innovations on their own that may later contribute to commercially attractive breakthroughs. The lead user process transforms the job of inventing breakthroughs into a systematic task of identifying lead users and learning from them. The authors explain the process and how the 3M project team successfully navigated through it. In the end, the team proposed three major new product lines and a change in the division's strategy that has led to the development of breakthrough products. And now several more divisions are using the process to break away from incrementalism.

  19. Typical NRC inspection procedures for model plant

    International Nuclear Information System (INIS)

    Blaylock, J.

    1984-01-01

    A summary of NRC inspection procedures for a model LEU fuel fabrication plant is presented. Procedures and methods for combining inventory data, seals, measurement techniques, and statistical analysis are emphasized

  20. Creating perturbations from a decaying field during inflation

    DEFF Research Database (Denmark)

    Mazumdar, A.; Wang, L.

    2013-01-01

    Typically, the fluctuations generated from a decaying field during inflation do not contribute to the large scale structures. In this paper, we provide an example where it is possible for a field which slowly rolls and then decays during inflation to create all the matter perturbations with a sli......Typically, the fluctuations generated from a decaying field during inflation do not contribute to the large scale structures. In this paper, we provide an example where it is possible for a field which slowly rolls and then decays during inflation to create all the matter perturbations...

  1. Chaos of several typical asymmetric systems

    International Nuclear Information System (INIS)

    Feng Jingjing; Zhang Qichang; Wang Wei

    2012-01-01

    The threshold for the onset of chaos in asymmetric nonlinear dynamic systems can be determined using an extended Padé method. In this paper, a double-well asymmetric potential system with damping under external periodic excitation is investigated, as well as an asymmetric triple-well potential system under external and parametric excitation. The integrals of Melnikov functions are established to demonstrate that the motion is chaotic. Threshold values are acquired when homoclinic and heteroclinic bifurcations occur. The results of analytical and numerical integration are compared to verify the effectiveness and feasibility of the analytical method.

  2. TYPICAL ABSENCES: RESULTS OF OWN INVESTIGATIONS

    Directory of Open Access Journals (Sweden)

    K. Yu. Mukhin

    2015-01-01

    Full Text Available Typical absences (TA are brief primary generalized epileptic seizures characterized by sudden onset and termination. According to their definition, absences consist of impairment of consciousness that is synchronously accompanied by electroencephalographic (EEG changes as generalized spike–slow wave discharges of 3 or more Hz. The authors conducted an investigation of 1261 patients with different forms of epilepsy with onset of seizures from the first days of life to the age of 18 years. The patients were followed up from 1990 to 2010. Absence seizures were detected in 231 patients, which accounts for 18.3 % of all the epileptic patients. TA were found in 102 patients, which constitutes 8.1 % of all cases of epilepsy with onset of seizures beyond the age of 18 years. The paper provides a detailed analysis of a group of patients with TA in terms of anamnestic, clinical, electroencephalographic, and neuroimaging features and the results of therapy with antiepileptic drugs (AEDs. The age of onset of TA-associated epilepsy was from 9 months to 17 years (mean 9.4 ± 4.06 years. The disease occurred most frequently in young school-age children (41.2 %. Isolated TA as the only type of seizures were observed in the clinical picture of 28 (27.5 % patients. TA were concurrent with other types of seizures in other cases. The investigators have identified 4 types of seizures which TA (generalized convulsions, myoclonic seizures, febrile seizures, and eyelid myoclonia may be concurrent with. Neuroimaging stated there were no brain changes in 85.3 % of TA-associated epilepsy cases. Moderate diffuse subatrophic changes were detected in other cases (14.7 %. Local cerebral structural abnormalities were absent. The use of antiepileptic therapy as both monotherapy and polytherapy using different combinations showed the high efficacy of AEDs. Complete remission was achieved in 84.3 % of TA-associated epilepsy cases. An AED-induced reduction in the frequency of

  3. Lipoma arborescens: Comparison of typical and atypical disease presentations

    International Nuclear Information System (INIS)

    Howe, B.M.; Wenger, D.E.

    2013-01-01

    Aim: To determine whether the aetiology differed between typical cases of lipoma arborescens with unilateral knee involvement and atypical cases involving joints other than the knee, polyarticular disease, and disease outside of the knee joint. Materials and methods: Cases of lipoma arborescens involving the knee joint were evaluated for the distribution of the disease and severity of degenerative arthritis. Joints other than the knee were evaluated for the presence and severity of degenerative arthritis, and the distribution was classified as either intra-articular, extra-articular, or both. Clinical history was reviewed for patient age at presentation, a history of inflammatory arthritis, diabetes mellitus, and known steroid use. Fisher's exact test was used to determine whether there was a statistically significant difference between typical and atypical presentations of the disease. Results: Lipoma arborescens was identified in 45 joints in 39 patients. Twenty-eight patients were classified as “typical” and 11 patients had “atypical” disease. There was no significant difference in age at presentation, presence of degenerative arthritis, or known inflammatory arthritis when comparing typical and atypical presentations of the disease. Conclusion: Twenty-eight percent of patients in the present study had atypical presentation of lipoma arborescens with multifocal lipoma arborescens or disease in joints other than the knee. There was no significant difference in age at presentation, presence of degenerative arthritis, or known inflammatory arthritis when comparing typical and atypical presentations of the disease. Of the 39 patients, only three had no evidence of degenerative arthritis, which suggests that many cases of lipoma arborescens are secondary to chronic reactive change in association with degenerative arthritis

  4. Risperidone versus typical antipsychotic medication for schizophrenia.

    Science.gov (United States)

    Hunter, R H; Joy, C B; Kennedy, E; Gilbody, S M; Song, F

    2003-01-01

    found in long-term studies (n=859, 2RCTs RR not 20% improved 0.51 CI 0.38 to 0.67 NNT 4;n=675 1RCT, RR not improved 40% 0.75 CI 0.66 to 0.84 NNT 5; n=675, 1 RCT, RR not 60% improved 0.90 CI 0.84 to 0.96, NNT 11). Risperidone was also more likely to reduce relapse at one year follow up, compared with haloperidol (n=367, 1 RCT, RR 0.64 CI 0.41 to 0.99, NNT 7). Less people allocated risperidone left studies before completion, both for short-term (n=3066, 16 RCTs, RR 0.76 CI 0.63 to 0.92, NNT 6) and long-term trials (n=1270, 4RCTs, RR 0.55 CI 0.42 to 0.73 NNT 4). For general movement disorders results favoured risperidone. People given risperidone had significantly fewer general movement disorders (including extrapyramidal side effects) than those receiving older typical antipsychotics (n=2702, 10 RCTs, RR 0.63 CI 0.56 to 0.71, NNT 3). Significantly fewer people given risperidone used antiparkinsonian drugs (n=2524, 11 RCTs, RR 0.66 CI 0.58 to 0.74, NNT 4). As regards body weight, however, four studies (n=1708) found people were more likely to gain weight if allocated risperidone compared to typical antipsychotics (RR 1.55 CI 1.25 to 1.93, NNH 3). Risperidone was no more or less likely than haloperidol to cause sexual problems such as erectile dysfunction (n=106, 2 RCTs, RR 1.55 CI 0.58 to 4.20). Finally, some results found risperidone was more likely to cause rhinitis than conventional antipsychotics (n=656, 3 RCTs, RR1.99 CI 1.24 to 3.19, NNH 3). Risperidone may be more acceptable to those with schizophrenia than older antipsychotics and have marginal benefits in terms of limited clinical improvement. Its adverse effect profile may be better than haloperidol. With the addition of more studies to this review, the publication bias evident in previous versions is no longer a significant issue. Any marginal benefits this drug may have have to be balanced against its greater cost and increased tendency to cause side effects such as weight gain. Recent important longer term

  5. SSI response of a typical shear wall structure. Volume 1

    International Nuclear Information System (INIS)

    Johnson, J.J.; Schewe, E.C.; Maslenikov, O.R.

    1984-04-01

    The Simplified Methods project of the US NRC-funded Seismic Safety Margins Research Program (SSMRP) has as its goal the development of a methodology to perform routine seismic probabilistic risk assessments of commercial nuclear power plants. The study reported here develops calibration factors to relate best estimate response to design values accounting for approximations and simplifications in SSI analysis procedures. Nineteen cases were analyzed and in-structure response compared. The structure of interest was a typical shear wall structure. 6 references, 44 figures, 22 tables

  6. Typical IAEA operations at a fuel fabrication plant

    International Nuclear Information System (INIS)

    Morsy, S.

    1984-01-01

    The IAEA operations performed at a typical Fuel Fabrication Plant are explained. To make the analysis less general the case of Low Enriched Uranium (LEU) Fuel Fabrication Plants is considered. Many of the conclusions drawn from this analysis could be extended to other types of fabrication plants. The safeguards objectives and goals at LEU Fuel Fabrication Plants are defined followed by a brief description of the fabrication process. The basic philosophy behind nuclear material stratification and the concept of Material Balance Areas (MBA's) and Key Measurement Points (KMP's) is explained. The Agency operations and verification methods used during physical inventory verifications are illustrated

  7. Creating

    DEFF Research Database (Denmark)

    Andersen, Kristina Vaarst; Lorenzen, Mark; Laursen, Stine

    2012-01-01

    This unique book reveals the procedural aspects of knowledge-based urban planning, development and assessment. Concentrating on major knowledge city building processes, and providing state-of-the-art experiences and perspectives, this important compendium explores innovative models, approaches an...

  8. Tissue loading created during spinal manipulation in comparison to loading created by passive spinal movements.

    Science.gov (United States)

    Funabashi, Martha; Kawchuk, Gregory N; Vette, Albert H; Goldsmith, Peter; Prasad, Narasimha

    2016-12-01

    Spinal manipulative therapy (SMT) creates health benefits for some while for others, no benefit or even adverse events. Understanding these differential responses is important to optimize patient care and safety. Toward this, characterizing how loads created by SMT relate to those created by typical motions is fundamental. Using robotic testing, it is now possible to make these comparisons to determine if SMT generates unique loading scenarios. In 12 porcine cadavers, SMT and passive motions were applied to the L3/L4 segment and the resulting kinematics tracked. The L3/L4 segment was removed, mounted in a parallel robot and kinematics of SMT and passive movements replayed robotically. The resulting forces experienced by L3/L4 were collected. Overall, SMT created both significantly greater and smaller loads compared to passive motions, with SMT generating greater anterioposterior peak force (the direction of force application) compared to all passive motions. In some comparisons, SMT did not create significantly different loads in the intact specimen, but did so in specific spinal tissues. Despite methodological differences between studies, SMT forces and loading rates fell below published injury values. Future studies are warranted to understand if loading scenarios unique to SMT confer its differential therapeutic effects.

  9. Dosimetry of typical transcranial magnetic stimulation devices

    Science.gov (United States)

    Lu, Mai; Ueno, Shoogo

    2010-05-01

    The therapeutic staff using transcranial magnetic stimulation (TMS) devices could be exposed to magnetic pulses. In this paper, dependence of induced currents in real human man model on different coil shapes, distance between the coil and man model as well as the rotation of the coil in space have been investigated by employing impedance method. It was found that the figure-of-eight coil has less leakage magnetic field and low current density induced in the body compared with the round coil. The TMS power supply cables play an important role in the induced current density in human body. The induced current density in TMS operator decreased as the coil rotates from parallel position to perpendicular position. Our present study shows that TMS operator should stand at least 110 cm apart from the coil.

  10. Pyrolysis characteristics of typical biomass thermoplastic composites

    Science.gov (United States)

    Cai, Hongzhen; Ba, Ziyu; Yang, Keyan; Zhang, Qingfa; Zhao, Kunpeng; Gu, Shiyan

    The biomass thermoplastic composites were prepared by extrusion molding method with poplar flour, rice husk, cotton stalk and corn stalk. The thermo gravimetric analyzer (TGA) has also been used for evaluating the pyrolysis process of the composites. The results showed that the pyrolysis process mainly consists of two stages: biomass pyrolysis and the plastic pyrolysis. The increase of biomass content in the composite raised the first stage pyrolysis peak temperature. However, the carbon residue was reduced and the pyrolysis efficiency was better because of synergistic effect of biomass and plastic. The composite with different kinds of biomass have similar pyrolysis process, and the pyrolysis efficiency of the composite with corn stalk was best. The calcium carbonate could inhibit pyrolysis process and increase the first stage pyrolysis peak temperature and carbon residue as a filling material of the composite.

  11. Pyrolysis characteristics of typical biomass thermoplastic composites

    Directory of Open Access Journals (Sweden)

    Hongzhen Cai

    Full Text Available The biomass thermoplastic composites were prepared by extrusion molding method with poplar flour, rice husk, cotton stalk and corn stalk. The thermo gravimetric analyzer (TGA has also been used for evaluating the pyrolysis process of the composites. The results showed that the pyrolysis process mainly consists of two stages: biomass pyrolysis and the plastic pyrolysis. The increase of biomass content in the composite raised the first stage pyrolysis peak temperature. However, the carbon residue was reduced and the pyrolysis efficiency was better because of synergistic effect of biomass and plastic. The composite with different kinds of biomass have similar pyrolysis process, and the pyrolysis efficiency of the composite with corn stalk was best. The calcium carbonate could inhibit pyrolysis process and increase the first stage pyrolysis peak temperature and carbon residue as a filling material of the composite. Keywords: Biomass thermoplastic composite, Calcium carbonate, Pyrolysis characteristic

  12. Impact Of Non-Governmental Organizations\\' Activities In Creating ...

    African Journals Online (AJOL)

    The study examines the impact of Non-Governmental Organizations\\' (NGOs) intervention in creating awareness and changing the mindset of people in typical rural communities in Kaduna State towards victims of HIV/AIDS. Structured questionnaire were used to collect data from adult male and female as well as young ...

  13. Towards creating believable decoy project folders for detecting data theft

    NARCIS (Netherlands)

    Thaler, S.; den Hartog, J.; Petkovic, M.

    2016-01-01

    Digital data theft is difficult to detect and typically it also takes a long time to discover that data has been stolen. This paper introduces a data-driven approach based on Markov chains to create believable decoy project folders which can assist in detecting potentially ongoing attacks. This can

  14. Aeroelastic Calculations Using CFD for a Typical Business Jet Model

    Science.gov (United States)

    Gibbons, Michael D.

    1996-01-01

    Two time-accurate Computational Fluid Dynamics (CFD) codes were used to compute several flutter points for a typical business jet model. The model consisted of a rigid fuselage with a flexible semispan wing and was tested in the Transonic Dynamics Tunnel at NASA Langley Research Center where experimental flutter data were obtained from M(sub infinity) = 0.628 to M(sub infinity) = 0.888. The computational results were computed using CFD codes based on the inviscid TSD equation (CAP-TSD) and the Euler/Navier-Stokes equations (CFL3D-AE). Comparisons are made between analytical results and with experiment where appropriate. The results presented here show that the Navier-Stokes method is required near the transonic dip due to the strong viscous effects while the TSD and Euler methods used here provide good results at the lower Mach numbers.

  15. Lipreading Ability and Its Cognitive Correlates in Typically Developing Children and Children with Specific Language Impairment

    Science.gov (United States)

    Heikkilä, Jenni; Lonka, Eila; Ahola, Sanna; Meronen, Auli; Tiippana, Kaisa

    2017-01-01

    Purpose: Lipreading and its cognitive correlates were studied in school-age children with typical language development and delayed language development due to specific language impairment (SLI). Method: Forty-two children with typical language development and 20 children with SLI were tested by using a word-level lipreading test and an extensive…

  16. Examining the Language Phenotype in Children with Typical Development, Specific Language Impairment, and Fragile X Syndrome

    Science.gov (United States)

    Haebig, Eileen; Sterling, Audra; Hoover, Jill

    2016-01-01

    Purpose: One aspect of morphosyntax, finiteness marking, was compared in children with fragile X syndrome (FXS), specific language impairment (SLI), and typical development matched on mean length of utterance (MLU). Method: Nineteen children with typical development (mean age = 3.3 years), 20 children with SLI (mean age = 4.9 years), and 17 boys…

  17. Effects of Biofeedback on Control and Generalization of Nasalization in Typical Speakers

    Science.gov (United States)

    Murray, Elizabeth S. Heller; Mendoza, Joseph O.; Gill, Simone V.; Perkell, Joseph S.; Stepp, Cara E.

    2016-01-01

    Purpose: The purpose of this study was to determine the effects of biofeedback on control of nasalization in individuals with typical speech. Method: Forty-eight individuals with typical speech attempted to increase and decrease vowel nasalization. During training, stimuli consisted of consonant-vowel-consonant (CVC) tokens with the center vowels…

  18. Impact of Typical Aging and Parkinson's Disease on the Relationship among Breath Pausing, Syntax, and Punctuation

    Science.gov (United States)

    Huber, Jessica E.; Darling, Meghan; Francis, Elaine J.; Zhang, Dabao

    2012-01-01

    Purpose: The present study examines the impact of typical aging and Parkinson's disease (PD) on the relationship among breath pausing, syntax, and punctuation. Method: Thirty young adults, 25 typically aging older adults, and 15 individuals with PD participated. Fifteen participants were age- and sex-matched to the individuals with PD.…

  19. Creating Interdisciplinarity within Monodisciplinary Structures

    DEFF Research Database (Denmark)

    Lindvig, Katrine

    discrepancies in the use of the term interdisciplinarity, which have repercussions for the practices and incentives of creating interdisciplinary education, research and collaboration. Overall, the thesis shows that interdisciplinary teaching and learning practices have to engage in a continuous balancing...

  20. Positive effects of creating mandalas

    OpenAIRE

    Toroš, Maja

    2016-01-01

    The purpose of the present master’s thesis is to examine the psychological effects of creating mandalas and to give recommendations for a better use of the mandalas in the practice of art assistance in order to help in this way others and oneself. Mandalas are sacred symbols, used in Hinduism and Buddhist religion practices as tools for meditation and concentration. They are geometrical representations of the creation of the cosmos and schemas of all that was created. Jung sat the foundations...

  1. Benefit and cost curves for typical pollination mutualisms.

    Science.gov (United States)

    Morris, William F; Vázquez, Diego P; Chacoff, Natacha P

    2010-05-01

    Mutualisms provide benefits to interacting species, but they also involve costs. If costs come to exceed benefits as population density or the frequency of encounters between species increases, the interaction will no longer be mutualistic. Thus curves that represent benefits and costs as functions of interaction frequency are important tools for predicting when a mutualism will tip over into antagonism. Currently, most of what we know about benefit and cost curves in pollination mutualisms comes from highly specialized pollinating seed-consumer mutualisms, such as the yucca moth-yucca interaction. There, benefits to female reproduction saturate as the number of visits to a flower increases (because the amount of pollen needed to fertilize all the flower's ovules is finite), but costs continue to increase (because pollinator offspring consume developing seeds), leading to a peak in seed production at an intermediate number of visits. But for most plant-pollinator mutualisms, costs to the plant are more subtle than consumption of seeds, and how such costs scale with interaction frequency remains largely unknown. Here, we present reasonable benefit and cost curves that are appropriate for typical pollinator-plant interactions, and we show how they can result in a wide diversity of relationships between net benefit (benefit minus cost) and interaction frequency. We then use maximum-likelihood methods to fit net-benefit curves to measures of female reproductive success for three typical pollination mutualisms from two continents, and for each system we chose the most parsimonious model using information-criterion statistics. We discuss the implications of the shape of the net-benefit curve for the ecology and evolution of plant-pollinator mutualisms, as well as the challenges that lie ahead for disentangling the underlying benefit and cost curves for typical pollination mutualisms.

  2. Co-creating meaning through Artful Inquiry

    DEFF Research Database (Denmark)

    Darsø, Lotte

    2017-01-01

    The purpose of this chapter is to point out the need for aesthetic and artful methods for reflection, learning and co-creation. The context is management education focused on developing innovation competency. The data derive from action research, observations and written reports. The main contrib...... of leadership icons as well as co-creating with tangible materials can give rise to new meaning and transformational learning.......The purpose of this chapter is to point out the need for aesthetic and artful methods for reflection, learning and co-creation. The context is management education focused on developing innovation competency. The data derive from action research, observations and written reports. The main...... contribution of this chapter is the introduction of a model for Artful Inquiry, which involves constructing powerful questions and finding appropriate artistic methods for reflecting and for co-creating with people or with artistic material. It is argued that Artful Inquiry can access deeper layers of knowing...

  3. A study on prioritizing typical women’s entrepreneur characteristics

    Directory of Open Access Journals (Sweden)

    Ebrahim Ramezani

    2014-07-01

    Full Text Available Entrepreneurship is one of the main pivot of progress and growth of every country. The spread of entrepreneurship particularly the role of women in this category has speeded up today more than any other times. Many of researchers believe that attention to women entrepreneurship plays remarkable role in soundness and safety of nation’s economy. Maybe in Iran less attention has been paid to this matter in proportion to other countries and due to various reasons, there are not many entrepreneur woman. However, employing typical entrepreneur women in various fields of productivity, industrial, commercial, social and cultural and even higher than these, in country’s political issue proves that women’s role is magnificent and in many cases they enjoy higher abilities in portion to men. In this paper, using additive ratio assessment (ARAS as a prioritizing method, eleven entrepreneur women were chosen for prioritizing criteria for measuring a typical women’s entrepreneurship characteristics. The results show that the balance between work and family among criteria are propounded as the highest weight and fulfilling different jobs simultaneously as the lowest weight.

  4. Positron lifetime and Doppler broadening study of defects created by swift ion irradiation in sapphire

    International Nuclear Information System (INIS)

    Liszkay, L.; Gordo, P.M.; Lima, A. de; Havancsak, K.; Skuratov, V.A.; Kajcsos, Z.

    2004-01-01

    Swift ions create a defect profile penetrating deep into a solid compared to the sampling range of typical slow positron beams, which may consequently study a homogeneous zone of defected materials. To investigate the defect population created by energetic ions, we studied α-Al 2 O 3 single crystals irradiated with swift Kr ions by using conventional and pulsed positron beams. Samples irradiated with krypton at 245 MeV energy in a wide fluence range show nearly saturated positron trapping above 5 x 10 10 ions cm -2 fluence, indicating the creation of monovacancies in high concentration. At 1 x 10 14 ions cm -2 irradiation a 500 ps long lifetime component appears, showing the creation of larger voids. This threshold corresponds well to the onset of the overlap of the damage zones after Bi ion irradiation along the ion trajectories observed with microscopic methods. (orig.)

  5. TYPICAL SAFETY MANAGEMENT SYSTEM OF AN OPERATOR IN THE RUSSIAN FEDERATION

    Directory of Open Access Journals (Sweden)

    Alexander Michaylovich Lushkin

    2017-01-01

    Full Text Available In order to implement the concept of acceptable risk all airlines should have the Safety Management System (SMS from 01.01.2009 - at the request of ICAO and from 01.01.2010 - at the request of the Federal Air Transport Agen- cy. State requirements for SMS have not been formulated clearly. Leading airlines, in an effort to meet international stand- ards, develop and implement SMS on their own. So the implemented SMS differ in control settings (level of safety, proce- dures and methodological support of the processes of safety management. The summary of the best experience in develop- ment, implementation and improvement of SMS in leading airlines, allows to create a standard SMS to the airline, where the basic procedures required by the standards are systematized. The standard SMS is formed on experience in design, implementation and development of corporate SMS in three leading Russian airlines, in which the author worked in 2006-2015, and can be the basis of an SMS of the airlines operat- ing the planes and helicopters. Taken into account in a typical SMS requirements of international and national standards, research results, developed and implemented methodical maintenance of management procedures level of safety, contribut- ed to the successful passage of IATA periodic audits on developing standards of operational safety IOSA by the airline members and achieve the best level of safety not only in Russia but also in the world.

  6. GENERATION OF A TYPICAL METEOROLOGICAL YEAR FOR PORT HARCOURT ZONE

    Directory of Open Access Journals (Sweden)

    OGOLOMA O.B.

    2011-04-01

    Full Text Available This paper presents data for the typical meteorological year (TMY for the Port Harcourt climatic zone based on the hourly meteorological data recorded during the period 1983–2002, using the Finkelstein-Schafer statistical method. The data are the global solar radiation, wind velocity, dry bulb temperature, relative humidity, and others. The HVAC outside design conditions for the Port Harcourt climatic zone (latitude 4.44oN, longitude 7.1oE, elevation 20 m were found to be 26.7oC, 78.6% and 3.5 m/s for the dry bulb temperature, relative humidity and wind speed, respectively, and 13.5 MJ/m2/day for the global solar radiation. The TMY data for the zone are shown to be sufficiently reliable for engineering practice.

  7. On Creating and Sustaining Alternatives

    DEFF Research Database (Denmark)

    Kyng, Morten

    2015-01-01

    This paper presents and discusses an initiative aimed at creating direct and long lasting influence on the use and development of telemedicine and telehealth by healthcare professionals, patients and citizens. The initiative draws on ideas, insights, and lessons learned from Participatory Design...... (PD) as well as from innovation theory and software ecosystems. Last, but not least, the ongoing debate on public finances/economy versus tax evasion by major private companies has been an important element in shaping the vision and creating support for the initiative. This vision is about democratic...

  8. Journaling: creating space for "I".

    Science.gov (United States)

    Charles, Jennell P

    2010-01-01

    As nurses engaged in a caring profession, it is critical that we learn not only to care for others but also to care for ourselves. To care effectively for ourselves, we must create the space and time in which to do this. Journaling is one tool that scholars offer as a way to create this space. Although there is no clear consensus about the best techniques for journaling, there is evidence that journaling, as a reflective, meditative activity, can promote creativity, self-awareness, and personal development.

  9. Study on the knowledge base system for the identification of typical target

    International Nuclear Information System (INIS)

    Qin Kai; Zhao Yingjun

    2008-01-01

    Based on the research on target knowledge base, target database, texture analysis, shape analysis, this paper proposed a new knowledge based method for typical target identification from remote sensing image. By extracting the texture characters and shape characters, joining with spatial analysis in GIS, reasoning according to the prior knowledge in the knowledge base, this method can identify and ex- tract typical target from remote sensing images. (authors)

  10. CREATE-IP and CREATE-V: Data and Services Update

    Science.gov (United States)

    Carriere, L.; Potter, G. L.; Hertz, J.; Peters, J.; Maxwell, T. P.; Strong, S.; Shute, J.; Shen, Y.; Duffy, D.

    2017-12-01

    The NASA Center for Climate Simulation (NCCS) at the Goddard Space Flight Center and the Earth System Grid Federation (ESGF) are working together to build a uniform environment for the comparative study and use of a group of reanalysis datasets of particular importance to the research community. This effort is called the Collaborative REAnalysis Technical Environment (CREATE) and it contains two components: the CREATE-Intercomparison Project (CREATE-IP) and CREATE-V. This year's efforts included generating and publishing an atmospheric reanalysis ensemble mean and spread and improving the analytics available through CREATE-V. Related activities included adding access to subsets of the reanalysis data through ArcGIS and expanding the visualization tool to GMAO forecast data. This poster will present the access mechanisms to this data and use cases including example Jupyter Notebook code. The reanalysis ensemble was generated using two methods, first using standard Python tools for regridding, extracting levels and creating the ensemble mean and spread on a virtual server in the NCCS environment. The second was using a new analytics software suite, the Earth Data Analytics Services (EDAS), coupled with a high-performance Data Analytics and Storage System (DASS) developed at the NCCS. Results were compared to validate the EDAS methodologies, and the results, including time to process, will be presented. The ensemble includes selected 6 hourly and monthly variables, regridded to 1.25 degrees, with 24 common levels used for the 3D variables. Use cases for the new data and services will be presented, including the use of EDAS for the backend analytics on CREATE-V, the use of the GMAO forecast aerosol and cloud data in CREATE-V, and the ability to connect CREATE-V data to NCCS ArcGIS services.

  11. Creating marketing strategies for higher education institutions

    OpenAIRE

    Lidia Białoń

    2015-01-01

    The article presents a thesis that the primary premise of creating marketing strategies for higher education institution is a three-dimensional notion of marketing. The first dimension lies in the theoretical notions of the essence of marketing, including the transactional marketing (1.0), relationship marketing (2.0) and spiritual marketing (3.0). The second dimension is formed by methods of marketing research and accurate notions of marketing, while the third are channels of marketing infor...

  12. Intentionality, consciousness, and creating community.

    Science.gov (United States)

    Malinski, Violet M

    2009-01-01

    Intentionality is briefly explored from the perspective of seminal written works on therapeutic touch and recorded conversations with Martha E. Rogers. This overview hints at possible interrelationships among intentionality, consciousness, and creating community, along with conceptual ambiguities, which are explored in detail by Zahourek and Larkin in this column.

  13. We create our own reality

    CERN Multimedia

    2003-01-01

    " Yes, we create our own reality. This is one of the most fundamental tenets of the ancient oriental religions, such as Buddhism. And during the last century, modern particle physics or quantum mechanics has discovered exactly the same thing" (1 page).

  14. Creating Space for Children's Literature

    Science.gov (United States)

    Serafini, Frank

    2011-01-01

    As teachers struggle to balance the needs of their students with the requirements of commercial reading materials, educators need to consider how teachers will create space for children's literature in today's classrooms. In this article, 10 practical recommendations for incorporating children's literature in the reading instructional framework…

  15. Creating an Innovative Learning Organization

    Science.gov (United States)

    Salisbury, Mark

    2010-01-01

    This article describes how to create an innovative learning (iLearning) organization. It begins by discussing the life cycle of knowledge in an organization, followed by a description of the theoretical foundation for iLearning. Next, the article presents an example of iLearning, followed by a description of the distributed nature of work, the…

  16. Creating a New Teaching Profession

    Science.gov (United States)

    Goldhaber, Dan, Ed.; Hannaway, Jane, Ed.

    2009-01-01

    Considering that having a quality teacher is the foremost in-school predictor of students' success, ensuring teacher excellence is vital to the nation's educational system. In "Creating a New Teaching Profession," diverse scholars assess the state of human capital development in the teaching profession today and how to progress.

  17. Improving Object-Oriented Methods by using Fuzzy Logic

    NARCIS (Netherlands)

    Marcelloni, Francesco; Aksit, Mehmet

    2000-01-01

    Object-oriented methods create software artifacts through the application of a large number or rules. Rules are typically formulated in two-valued logic. There are a number of problems on how rules are defined and applied in current methods. First, two-valued logic can capture completely neither

  18. Creating the networking enterprises - logistics determinants

    Directory of Open Access Journals (Sweden)

    Ewa Kulińska

    2014-06-01

    Full Text Available Background: The article describes the determinants of creating network enterprises with peculiar consideration of logistic factors which are conditioning the organization of processes, exchange of resources and competences. On the basis of literature analysis, there is proposed a model of creating network enterprises. A model is verified in the application part of the thesis. Methods: Within the publication a literature review of submitted scope of the interest was presented, as well as the empirical research. A research substance attaches the enterprises created on the basis of the reactivation of organizations which has collapsed due to bankruptcy proceeding. The research was based upon direct interviews with employees of the net-forming entities. Results and conclusions: Results of the research shows that taking up the cooperation and net-cooperation was the only possibility for new entities to come into existence, that were  based upon old assets and human resources liquidated during bankruptcy proceeding. There was indentified many determinants of enterprises network cooperation, however due to the research a conclusion draws, that basic factors of creating network cooperation are those which are profit-achieving oriented.

  19. Creating fluid injectivity in tar sands formations

    Science.gov (United States)

    Stegemeier, George Leo; Beer, Gary Lee; Zhang, Etuan

    2010-06-08

    Methods for treating a tar sands formation are described herein. Methods for treating a tar sands may include heating a portion of a hydrocarbon layer in the formation from one or more heaters located in the portion. The heat may be controlled to increase the permeability of at least part of the portion to create an injection zone in the portion with an average permeability sufficient to allow injection of a fluid through the injection zone. A drive fluid and/or an oxidizing fluid may be provided into the injection zone. At least some hydrocarbons are produced from the portion.

  20. Exploration of Rice Husk Compost as an Alternate Organic Manure to Enhance the Productivity of Blackgram in Typic Haplustalf and Typic Rhodustalf

    Directory of Open Access Journals (Sweden)

    Subramanium Thiyageshwari

    2018-02-01

    Full Text Available The present study was aimed at using cellulolytic bacterium Enhydrobacter and fungi Aspergillus sp. for preparing compost from rice husk (RH. Further, the prepared compost was tested for their effect on blackgram growth promotion along with different levels of recommended dose of fertilizer (RDF in black soil (typic Haplustalf and red soil (typic Rhodustalf soil. The results revealed that, inoculation with lignocellulolytic fungus (LCF Aspergillus sp. @ 2% was considered as the most efficient method of composting within a short period. Characterization of composted rice husk (CRH was examined through scanning electron microscope (SEM for identifying significant structural changes. At the end of composting, N, P and K content increased with decrease in CO2 evolution, C:N and C:P ratios. In comparison to inorganic fertilization, an increase in grain yield of 16% in typic Haplustalf and 17% in typic Rhodustalf soil over 100% RDF was obtained from the integrated application of CRH@ 5 t ha−1 with 50% RDF and biofertilizers. The crude protein content was maximum with the combined application of CRH, 50% RDF and biofertilizers of 20% and 21% in typic Haplustalf and typic Rhodustalf soils, respectively. Nutrient rich CRH has proved its efficiency on crop growth and soil fertility.

  1. A quantitative evaluation of seismic margin of typical sodium piping

    International Nuclear Information System (INIS)

    Morishita, Masaki

    1999-05-01

    It is widely recognized that the current seismic design methods for piping involve a large amount of safety margin. From this viewpoint, a series of seismic analyses and evaluations with various design codes were made on typical LMFBR main sodium piping systems. Actual capability against seismic loads were also estimated on the piping systems. Margins contained in the current codes were quantified based on these results, and potential benefits and impacts to the piping seismic design were assessed on possible mitigation of the current code allowables. From the study, the following points were clarified; 1) A combination of inelastic time history analysis and true (without margin)strength capability allows several to twenty times as large seismic load compared with the allowable load with the current methods. 2) The new rule of the ASME is relatively compatible with the results of inelastic analysis evaluation. Hence, this new rule might be a goal for the mitigation of seismic design rule. 3) With this mitigation, seismic design accommodation such as equipping with a large number of seismic supports may become unnecessary. (author)

  2. Leadership Networking Connect, Collaborate, Create

    CERN Document Server

    (CCL), Center for Creative Leadership; Baldwin, David

    2011-01-01

    Networking is essential to effective leadership in today's organizations. Leaders who are skilled networkers have access to people, information, and resources to help solve problems and create opportunities. Leaders who neglect their networks are missing out on a critical component of their role as leaders. This book will help leaders take a new view of networking and provide insight into how to enhance their networks and become effective at leadership networking.

  3. Designing value-creating supply chain networks

    CERN Document Server

    Martel, Alain

    2016-01-01

    Focusing on the design of robust value-creating supply chain networks (SCN) and key strategic issues related to the number; location, capacity and mission of supply chain facilities (plants, distribution centers) – as well as the network structure required to provide flexibility and resilience in an uncertain world – this book presents an innovative methodology for SCN reengineering that can be used to significantly improve the bottom line of supply chain dependent businesses. Providing readers with the tools needed to analyze and model value creation activities, Designing Value-Creating Supply Chain Networks examines the risks faced by modern supply chains, and shows how to develop plausible future scenarios to evaluate potential SCN designs. The design methods proposed are based on a visual representation formalism that facilitates the analysis and modeling of SCN design problems, book chapters incorporate several example problems and exercises which can be solved with Excel tools (Analysis tools and So...

  4. Concept typicality responses in the semantic memory network.

    Science.gov (United States)

    Santi, Andrea; Raposo, Ana; Frade, Sofia; Marques, J Frederico

    2016-12-01

    For decades concept typicality has been recognized as critical to structuring conceptual knowledge, but only recently has typicality been applied in better understanding the processes engaged by the neurological network underlying semantic memory. This previous work has focused on one region within the network - the Anterior Temporal Lobe (ATL). The ATL responds negatively to concept typicality (i.e., the more atypical the item, the greater the activation in the ATL). To better understand the role of typicality in the entire network, we ran an fMRI study using a category verification task in which concept typicality was manipulated parametrically. We argue that typicality is relevant to both amodal feature integration centers as well as category-specific regions. Both the Inferior Frontal Gyrus (IFG) and ATL demonstrated a negative correlation with typicality, whereas inferior parietal regions showed positive effects. We interpret this in light of functional theories of these regions. Interactions between category and typicality were not observed in regions classically recognized as category-specific, thus, providing an argument against category specific regions, at least with fMRI. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. 12 CFR 408.6 - Typical classes of action.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Typical classes of action. 408.6 Section 408.6 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES PROCEDURES FOR COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT Eximbank Implementing Procedures § 408.6 Typical classes of action. (a) Section 1507.3...

  6. [Research on developping the spectral dataset for Dunhuang typical colors based on color constancy].

    Science.gov (United States)

    Liu, Qiang; Wan, Xiao-Xia; Liu, Zhen; Li, Chan; Liang, Jin-Xing

    2013-11-01

    The present paper aims at developping a method to reasonably set up the typical spectral color dataset for different kinds of Chinese cultural heritage in color rendering process. The world famous wall paintings dating from more than 1700 years ago in Dunhuang Mogao Grottoes was taken as typical case in this research. In order to maintain the color constancy during the color rendering workflow of Dunhuang culture relics, a chromatic adaptation based method for developping the spectral dataset of typical colors for those wall paintings was proposed from the view point of human vision perception ability. Under the help and guidance of researchers in the art-research institution and protection-research institution of Dunhuang Academy and according to the existing research achievement of Dunhuang Research in the past years, 48 typical known Dunhuang pigments were chosen and 240 representative color samples were made with reflective spectral ranging from 360 to 750 nm was acquired by a spectrometer. In order to find the typical colors of the above mentioned color samples, the original dataset was devided into several subgroups by clustering analysis. The grouping number, together with the most typical samples for each subgroup which made up the firstly built typical color dataset, was determined by wilcoxon signed rank test according to the color inconstancy index comprehensively calculated under 6 typical illuminating conditions. Considering the completeness of gamut of Dunhuang wall paintings, 8 complementary colors was determined and finally the typical spectral color dataset was built up which contains 100 representative spectral colors. The analytical calculating results show that the median color inconstancy index of the built dataset in 99% confidence level by wilcoxon signed rank test was 3.28 and the 100 colors are distributing in the whole gamut uniformly, which ensures that this dataset can provide reasonable reference for choosing the color with highest

  7. Typical balance exercises or exergames for balance improvement?

    Science.gov (United States)

    Gioftsidou, Asimenia; Vernadakis, Nikolaos; Malliou, Paraskevi; Batzios, Stavros; Sofokleous, Polina; Antoniou, Panagiotis; Kouli, Olga; Tsapralis, Kyriakos; Godolias, George

    2013-01-01

    Balance training is an effective intervention to improve static postural sway and balance. The purpose of the present study was to investigate the effectiveness of the Nintendo Wii Fit Plus exercises for improving balance ability in healthy collegiate students in comparison with a typical balance training program. Forty students were randomly divided into two groups, a traditional (T group) and a Nintendo Wii group (W group) performed an 8 week balance program. The "W group" used the interactive games as a training method, while the "T group" used an exercise program with mini trampoline and inflatable discs (BOSU). Pre and Post-training participants completed balance assessments. Two-way repeated measures analyses of variance (ANOVAs) were conducted to determine the effect of training program. Analysis of the data illustrated that both training program groups demonstrated an improvement in Total, Anterior-posterior and Medial Lateral Stability Index scores for both limbs. Only at the test performed in the balance board with anterior-posterior motion, the improvement in balance ability was greater in the "T group" than the "W group", when the assessment was performed post-training (p=0.023). Findings support the effectiveness of using the Nintendo Wii gaming console as a balance training intervention tool.

  8. Creating Cross-disciplinary Courses.

    Science.gov (United States)

    Reynolds, Elaine R

    2012-01-01

    Because of its focus on the biological underpinnings of action and behavior, neuroscience intersects with many fields of human endeavor. Some of these cross-disciplinary intersections have been long standing, while others, such as neurotheology or neuroeconomics, are more recently formed fields. Many undergraduate institutions have sought to include cross-disciplinary courses in their curriculum because this style of pedagogy is often seen as applicable to real world problems. However, it can be difficult for faculty with specialized training within their discipline to expand beyond their own fields to offer cross-disciplinary courses. I have been creating a series of multi- or cross-disciplinary courses and have found some strategies that have helped me successfully teach these classes. I will discuss general strategies and tools in developing these types of courses including: 1) creating mixed experience classrooms of students and contributing faculty 2) finding the right tools that will allow you to teach to a mixed population without prerequisites 3) examining the topic using multiple disciplinary perspectives 4) feeding off student experience and interest 5) assessing the impact of these courses on student outcomes and your neuroscience program. This last tool in particular is important in establishing the validity of this type of teaching for neuroscience students and the general student population.

  9. Creating your own leadership brand.

    Science.gov (United States)

    Kerfoot, Karlene

    2002-01-01

    Building equity in a brand happens through many encounters. The initial attraction must be followed by the meeting of expectations. This creates a loyalty that is part of an emotional connection to that brand. This is the same process people go through when they first meet a leader and decide if this is a person they want to buy into. People will examine your style, your competence, and your standards. If you fail on any of these fronts, your ability to lead will be severely compromised. People expect more of leaders now, because they know and recognize good leaders. And, predictably, people are now more cynical of leaders because of the well-publicized excess of a few leaders who advanced their own causes at the expense of their people and their financial future. This will turn out to be a good thing, because it will create a higher standard of leadership that all must aspire to achieve. When the bar is raised for us, our standards of performance are also raised.

  10. OPPOSITIONS CREATING HOMOUR IN JOKES

    Directory of Open Access Journals (Sweden)

    Umral Deveci

    2016-12-01

    Full Text Available Human beings, who perceive the reality of death however who do not know when it will happen, begin their life with this deficiency. Therefore, throughout their lives, they struggle to consummate and make up for the things that they perceive as deficiency or shortcomings through different ways. Humor is one of these means. The fact that deficiencies are eliminated results in superiority and relaxation. The sense of humor and relaxation simultaneously provide laughter. When theories of humor such as superiority, incongruous and relief are taken into consideration, it seems that these theories are related and support each other. Each text is whole with its form and content, which should be evaluated as a whole as much as possible. Hence this study dwells on shortcomings in jokes and in the lights of these shortcomings and theories of humor, it is intended tomake humor in stories, in terms of structural and semantic context, more concrete. Five stories/jokes randomly selected through samples are analyzed in this article. There are two basic types of opposition. The firstone is opposition that creates situation, the second one is thatcreates laughter. The first opposition depicts the shortcomings of knowledge, skill, patience arrogance and jealousyand prepares the second opposition. The opposition that creates laughter make up for shortcomings through cause and effect relationship and laughter comes out.

  11. Narrative versus style: Effect of genre-typical events versus genre-typical filmic realizations on film viewers’ genre recognition

    NARCIS (Netherlands)

    Visch, V.; Tan, E.

    2008-01-01

    This study investigated whether film viewers recognize four basic genres (comic, drama, action and nonfiction) on the basis of genre-typical event cues or of genre-typical filmic realization cues of events. Event cues are similar to the narrative content of a film sequence, while filmic realization

  12. Gender-typical olfactory regulation of sexual behavior in goldfish

    Directory of Open Access Journals (Sweden)

    Makito eKobayashi

    2014-04-01

    Full Text Available It is known that olfaction is essential for the occurrence of sexual behavior in male goldfish. Sex pheromones from ovulatory females elicit male sexual behavior, chasing and sperm releasing act. In female goldfish, ovarian prostaglandin F2α (PGF elicits female sexual behavior, egg releasing act. It has been considered that olfaction does not affect sexual behavior in female goldfish. In the present study, we reexamined the involvement of olfaction in sexual behavior of female goldfish. Olfaction was blocked in male and female goldfish by two methods: nasal occlusion (NO which blocks the reception of olfactants, and olfactory tract section (OTX which blocks transmission of olfactory information from the olfactory bulb to the telencephalon. Sexual behavior of goldfish was induced by administration of PGF to females, an established method for inducing goldfish sexual behavior in both sexes. Sexual behavior in males was suppressed by NO and OTX as previously reported because of lack of pheromone stimulation. In females, NO suppressed sexual behavior but OTX did not affect the occurrence of sexual behavior. Females treated with both NO and OTX performed sexual behavior normally. These results indicate that olfaction is essential in female goldfish to perform sexual behavior as in males but in a different manner. The lack of olfaction in males causes lack of pheromonal stimulation, resulting in no behavior elicited. Whereas the results of female experiments suggest that lack of olfaction in females causes strong inhibition of sexual behavior mediated by the olfactory pathway. Olfactory tract section is considered to block the pathway and remove this inhibition, resulting in the resumption of the behavior. By subtract sectioning of the olfactory tract, it was found that this inhibition was mediated by the medial olfactory tracts, not the lateral olfactory tracts. Thus, it is concluded that goldfish has gender-typical olfactory regulation for sexual

  13. ECONOMIC STRATEGY CREATED THROUGH THEORY FOCUSED PLANNING

    Directory of Open Access Journals (Sweden)

    Dumitru-Alexandru Bodislav

    2011-06-01

    Full Text Available The research done for this article is following the elaboration of a moldable model on the actual economic context, in which there are considered continuous learning elements on facts and commercial niches, evaluating a business starting from causality diagram and structuring its processes. Analyzing the evolution of a business and on the market in which they are deploying their activity through quantitative and qualitative measurement methods focused on trends. Testing hypotheses and business suppositions that are the main engine of theory focused on planning, a model of creating a strategic management process that will be developed in this article.

  14. Dancing Lights: Creating the Aurora Story

    Science.gov (United States)

    Wood, E. L.; Cobabe-Ammann, E. A.

    2009-12-01

    Science tells a story about our world, our existence, our history, and the larger environment our planet occupies. Bearing this in mind, we created a series of lessons for 3rd-5th grades using a cross-disciplinary approach to teaching about the aurora by incorporating stories, photos, movies, and geography into the science in order to paint a broad picture and answer the question, “why do we care?” The fundamental backbone of the program is literacy. Students write and illustrate fiction and non-fiction work, poetry, and brochures that solidify both language arts skills and science content. In a time when elementary teachers relegate science to less than one hour per week, we have developed a novel science program that can be easily integrated with other topics during the typical school day to increase the amount of science taught in a school year. We are inspiring students to take an interest in the natural world with this program, a stepping-stone for larger things.

  15. Supporting SMEs in creating jobs

    Directory of Open Access Journals (Sweden)

    Daniela PASNICU

    2018-03-01

    Full Text Available SMEs are the most dynamic sector of the economy, representing a key factor in employment growth. Although SMEs have been severely affected by the economic crisis from 2008, they continue to be a more and more important source of generating jobs, regardless of size class. Given the differentiated contribution of SMEs to job creation as a result of their heterogeneity, the article analyses the dynamics of staff in enterprises by size classes and activities of the national economy. The statistical analysis is followed by a SWOT analysis of policies and tools to support SMEs in creating jobs both with direct action - management, recruitment, training and indirectly action by addressing general business issues. Measures that support the economic growth of SMEs through internationalization, innovation and improved access to finance foster competitiveness and, implicitly, the creation of new jobs.

  16. Creating a Database for Test Items in National Examinations (pp ...

    African Journals Online (AJOL)

    Nekky Umera

    different programmers create files and application programs over a long period. .... In theory or essay questions, alternative methods of solving problems are explored and ... Unworthy items are those that do not focus on the central concept or.

  17. Advanced software tool for the creation of a typical meteorological year

    International Nuclear Information System (INIS)

    Skeiker, Kamal; Ghani, Bashar Abdul

    2008-01-01

    The generation of a typical meteorological year is of great importance for calculations concerning many applications in the field of thermal engineering. In this context, method that has been proposed by Hall et al. is selected for generating typical data, and an improved criterion for final selection of typical meteorological month (TMM) was demonstrated. The final selection of the most representative year was done by examining a composite score S. The composite score was calculated as the weighed sum of the scores of the four meteorological parameters used. These parameters are air dry bulb temperature, relative humidity, wind velocity and global solar radiation intensity. Moreover, a new modern software tool using Delphi 6.0 has been developed, utilizing the Filkenstein-Schafer statistical method for the creation of a typical meteorological year for any site of concern. Whereas, an improved criterion for final selection of typical meteorological month was employed. Such tool allows the user to perform this task without an intimate knowledge of all of the computational details. The final alphanumerical and graphical results are presented on screen, and can be saved to a file or printed as a hard copy. Using this software tool, a typical meteorological year was generated for Damascus, capital of Syria, as a test run example. The data processed used were obtained from the Department of Meteorology and cover a period of 10 years (1991-2000)

  18. Prospective memory deficits in illicit polydrug users are associated with the average long-term typical dose of ecstasy typically consumed in a single session.

    Science.gov (United States)

    Gallagher, Denis T; Hadjiefthyvoulou, Florentia; Fisk, John E; Montgomery, Catharine; Robinson, Sarita J; Judge, Jeannie

    2014-01-01

    Neuroimaging evidence suggests that ecstasy-related reductions in SERT densities relate more closely to the number of tablets typically consumed per session rather than estimated total lifetime use. To better understand the basis of drug related deficits in prospective memory (p.m.) we explored the association between p.m. and average long-term typical dose and long-term frequency of use. Study 1: Sixty-five ecstasy/polydrug users and 85 nonecstasy users completed an event-based, a short-term and a long-term time-based p.m. task. Study 2: Study 1 data were merged with outcomes on the same p.m. measures from a previous study creating a combined sample of 103 ecstasy/polydrug users, 38 cannabis-only users, and 65 nonusers of illicit drugs. Study 1: Ecstasy/polydrug users had significant impairments on all p.m. outcomes compared with nonecstasy users. Study 2: Ecstasy/polydrug users were impaired in event-based p.m. compared with both other groups and in long-term time-based p.m. compared with nonillicit drug users. Both drug using groups did worse on the short-term time-based p.m. task compared with nonusers. Higher long-term average typical dose of ecstasy was associated with poorer performance on the event and short-term time-based p.m. tasks and accounted for unique variance in the two p.m. measures over and above the variance associated with cannabis and cocaine use. The typical ecstasy dose consumed in a single session is an important predictor of p.m. impairments with higher doses reflecting increasing tolerance giving rise to greater p.m. impairment.

  19. South American Youth and Integration : Typical Situations and Youth ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    South American Youth and Integration : Typical Situations and Youth ... IDRC partner the World Economic Forum is building a hub for inclusive growth ... Brazil, Paraguay and Uruguay) and their perception of rights, democracy and regional.

  20. Portion distortion: typical portion sizes selected by young adults.

    Science.gov (United States)

    Schwartz, Jaime; Byrd-Bredbenner, Carol

    2006-09-01

    The incidence of obesity has increased in parallel with increasing portion sizes of individually packaged and ready-to-eat prepared foods as well as foods served at restaurants. Portion distortion (perceiving large portion sizes as appropriate amounts to eat at a single eating occasion) may contribute to increasing energy intakes and expanding waistlines. The purpose of this study was to determine typical portion sizes that young adults select, how typical portion sizes compare with reference portion sizes (based in this study on the Nutrition Labeling and Education Act's quantities of food customarily eaten per eating occasion), and whether the size of typical portions has changed over time. Young adults (n=177, 75% female, age range 16 to 26 years) at a major northeastern university. Participants served themselves typical portion sizes of eight foods at breakfast (n=63) or six foods at lunch or dinner (n=62, n=52, respectively). Typical portion-size selections were unobtrusively weighed. A unit score was calculated by awarding 1 point for each food with a typical portion size that was within 25% larger or smaller than the reference portion; larger or smaller portions were given 0 points. Thus, each participant's unit score could range from 0 to 8 at breakfast or 0 to 6 at lunch and dinner. Analysis of variance or t tests were used to determine whether typical and reference portion sizes differed, and whether typical portion sizes changed over time. Mean unit scores (+/-standard deviation) were 3.63+/-1.27 and 1.89+/-1.14, for breakfast and lunch/dinner, respectively, indicating little agreement between typical and reference portion sizes. Typical portions sizes in this study tended to be significantly different from those selected by young adults in a similar study conducted 2 decades ago. Portion distortion seems to affect the portion sizes selected by young adults for some foods. This phenomenon has the potential to hinder weight loss, weight maintenance, and

  1. Effects of stress typicality during speeded grammatical classification.

    Science.gov (United States)

    Arciuli, Joanne; Cupples, Linda

    2003-01-01

    The experiments reported here were designed to investigate the influence of stress typicality during speeded grammatical classification of disyllabic English words by native and non-native speakers. Trochaic nouns and iambic gram verbs were considered to be typically stressed, whereas iambic nouns and trochaic verbs were considered to be atypically stressed. Experiments 1a and 2a showed that while native speakers classified typically stressed words individual more quickly and more accurately than atypically stressed words during differences reading, there were no overall effects during classification of spoken stimuli. However, a subgroup of native speakers with high error rates did show a significant effect during classification of spoken stimuli. Experiments 1b and 2b showed that non-native speakers classified typically stressed words more quickly and more accurately than atypically stressed words during reading. Typically stressed words were classified more accurately than atypically stressed words when the stimuli were spoken. Importantly, there was a significant relationship between error rates, vocabulary size and the size of the stress typicality effect in each experiment. We conclude that participants use information about lexical stress to help them distinguish between disyllabic nouns and verbs during speeded grammatical classification. This is especially so for individuals with a limited vocabulary who lack other knowledge (e.g., semantic knowledge) about the differences between these grammatical categories.

  2. Toddlers' categorization of typical and scrambled dolls and cars.

    Science.gov (United States)

    Heron, Michelle; Slaughter, Virginia

    2008-09-01

    Previous research has demonstrated discrimination of scrambled from typical human body shapes at 15-18 months of age [Slaughter, V., & Heron, M. (2004). Origins and early development of human body knowledge. Monographs of the Society for Research in Child Development, 69]. In the current study 18-, 24- and 30-month-old infants were presented with four typical and four scrambled dolls in a sequential touching procedure, to assess the development of explicit categorization of human body shapes. Infants were also presented with typical and scrambled cars, allowing comparison of infants' categorization of scrambled and typical exemplars in a different domain. Spontaneous comments regarding category membership were recorded. Girls categorized dolls and cars as typical or scrambled at 30 months, whereas boys only categorized the cars. Earliest categorization was for typical and scrambled cars, at 24 months, but only for boys. Language-based knowledge, coded from infants' comments, followed the same pattern. This suggests that human body knowledge does not have privileged status in infancy. Gender differences in performance are discussed.

  3. Data Programming: Creating Large Training Sets, Quickly

    Science.gov (United States)

    Ratner, Alexander; De Sa, Christopher; Wu, Sen; Selsam, Daniel; Ré, Christopher

    2018-01-01

    Large labeled training sets are the critical building blocks of supervised learning methods and are key enablers of deep learning techniques. For some applications, creating labeled training sets is the most time-consuming and expensive part of applying machine learning. We therefore propose a paradigm for the programmatic creation of training sets called data programming in which users express weak supervision strategies or domain heuristics as labeling functions, which are programs that label subsets of the data, but that are noisy and may conflict. We show that by explicitly representing this training set labeling process as a generative model, we can “denoise” the generated training set, and establish theoretically that we can recover the parameters of these generative models in a handful of settings. We then show how to modify a discriminative loss function to make it noise-aware, and demonstrate our method over a range of discriminative models including logistic regression and LSTMs. Experimentally, on the 2014 TAC-KBP Slot Filling challenge, we show that data programming would have led to a new winning score, and also show that applying data programming to an LSTM model leads to a TAC-KBP score almost 6 F1 points over a state-of-the-art LSTM baseline (and into second place in the competition). Additionally, in initial user studies we observed that data programming may be an easier way for non-experts to create machine learning models when training data is limited or unavailable. PMID:29872252

  4. Creating a Multi-axis Machining Postprocessor

    Directory of Open Access Journals (Sweden)

    Petr Vavruška

    2012-01-01

    Full Text Available This paper focuses on the postprocessor creation process. When using standard commercially available postprocessors it is often very difficult to modify its internal source code, and it is a very complex process, in many cases even impossible, to implement the newly-developed functions. It is therefore very important to have a method for creating a postprocessor for any CAM system, which allows CL data (Cutter Location data to be generated to a separate text file. The goal of our work is to verify the proposed method for creating a postprocessor. Postprocessor functions for multi-axis machiningare dealt with in this work. A file with CL data must be translated by the postprocessor into an NC program that has been customized for a specific production machine and its control system. The postprocessor is therefore verified by applications for machining free-form surfaces of complex parts, and by executing the NC programs that are generated on real machine tools. This is also presented here.

  5. Subjective evaluation of auralizations created from multi-channel anechoic recordings of a talker in motion

    Science.gov (United States)

    Vigeant, Michelle C.; Wang, Lily M.

    2005-04-01

    A high degree of speech intelligibility is very important in educational environments. When designing such spaces, like classrooms, auralizations can be used to subjectively assess the degree of speech intelligibility and clarity. Auralizations are most commonly made by convolving the impulse response (IR) of an omni-directional source with a single channel anechoic speech recording. This paper explores the idea of using multi-channel recordings to create the auralizations, using a female talker in motion. An omni-directional source is split into quadrants and the IR is calculated for each section. These IR's are convolved with the appropriate channel of the anechoic recording and then the four auralizations are mixed to create one final auralization. The auralizations were made using four-channel anechoic recordings of a person walking on a platform while talking. Subjective tests were conducted to determine the ease with which subjects could identify the direction of the movement of the source in rooms with varying amounts of absorption. This method can be used to create more realistic classroom auralizations, as teachers typically move around the room as they teach. [Work supported by the National Science Foundation.

  6. Creating experimental color harmony map

    Science.gov (United States)

    Chamaret, Christel; Urban, Fabrice; Lepinel, Josselin

    2014-02-01

    Starting in the 17th century with Newton, color harmony is a topic that did not reach a consensus on definition, representation or modeling so far. Previous work highlighted specific characteristics for color harmony on com- bination of color doublets or triplets by means of a human rating on a harmony scale. However, there were no investigation involving complex stimuli or pointing out how harmony is spatially located within a picture. The modeling of such concept as well as a reliable ground-truth would be of high value for the community, since the applications are wide and concern several communities: from psychology to computer graphics. We propose a protocol for creating color harmony maps from a controlled experiment. Through an eye-tracking protocol, we focus on the identification of disharmonious colors in pictures. The experiment was composed of a free viewing pass in order to let the observer be familiar with the content before a second pass where we asked "to search for the most disharmonious areas in the picture". Twenty-seven observers participated to the experiments that was composed of a total of 30 different stimuli. The high inter-observer agreement as well as a cross-validation confirm the validity of the proposed ground-truth.

  7. Creating a winning organizational culture.

    Science.gov (United States)

    Campbell, Robert James

    2009-01-01

    This article explores the idea of how to create a winning organizational culture. By definition, a winning organizational culture is one that is able to make current innovations stick, while continuously changing based on the demands of the marketplace. More importantly, the article explores the notion that a winning organizational culture can have a profound impact on the conscious of the workforce, helping each individual to become a better, more productive person, who provides important services and products to the community. To form a basis toward defining the structure of what a winning organization culture looks like, 4 experts were asked 12 questions related to the development of an organizational culture. Three of the experts have worked intimately within the health care industry, while a fourth has been charged with turning around an organization that has had a losing culture for 17 years. The article provides insight into the role that values, norms, goals, leadership style, familiarity, and hiring practices play in developing a winning organizational culture. The article also emphasizes the important role that leaders perform in developing an organizational culture.

  8. Food and Wine Tourism: an Analysis of Italian Typical Products

    Directory of Open Access Journals (Sweden)

    Francesco Maria Olivieri

    2015-06-01

    Full Text Available The aim of this work is to focus the specific role of local food productions in spite of its relationship with tourism sector to valorization and promotion of the territorial cultural heritage. The modern agriculture has been and, in the recent years, several specific features are emerging referring to different territorials areas. Tourist would like to have a complete experience consumption of a destination, specifically to natural and cultural heritage and genuine food. This contribute addresses the topics connected to the relationship between typical productions system and tourism sector to underline the competitive advantages to local development. The typical productions are Designation of Protected Origin (Italian DOP, within wine certifications DOCG and DOC and Typical Geographical Indication (IGP and wine’s IGT. The aim is an analysis of the specialization of these kinds of production at Italian regional scale. The implication of the work has connected with defining a necessary and appropriate value strategies based on marketing principles in order to translate the benefit of typical productions to additional value for the local system. Thus, the final part of the paper describes the potential dynamics with the suitable accommodation typology of agriturismo and the typical production system of Italian Administrative Regions.

  9. Early Freezing of Gait: Atypical versus Typical Parkinson Disorders

    Directory of Open Access Journals (Sweden)

    Abraham Lieberman

    2015-01-01

    Full Text Available In 18 months, 850 patients were referred to Muhammad Ali Parkinson Center (MAPC. Among them, 810 patients had typical Parkinson disease (PD and 212 had PD for ≤5 years. Among the 212 patients with early PD, 27 (12.7% had freezing of gait (FOG. Forty of the 850 had atypical parkinsonism. Among these 40 patients, all of whom had symptoms for ≤5 years, 12 (30.0% had FOG. FOG improved with levodopa in 21/27 patients with typical PD but did not improve in the 12 patients with atypical parkinsonism. FOG was associated with falls in both groups of patients. We believe that FOG unresponsive to levodopa in typical PD resembles FOG in atypical parkinsonism. We thus compared the 6 typical PD patients with FOG unresponsive to levodopa plus the 12 patients with atypical parkinsonism with the 21 patients with typical PD responsive to levodopa. We compared them by tests of locomotion and postural stability. Among the patients with FOG unresponsive to levodopa, postural stability was more impaired than locomotion. This finding leads us to believe that, in these patients, postural stability, not locomotion, is the principal problem underlying FOG.

  10. Frequency of celiac disease in adult patients with typical or atypical malabsorption symptoms in isfahan, iran.

    Science.gov (United States)

    Emami, Mohammad Hassan; Kouhestani, Soheila; Karimi, Somayeh; Baghaei, Abdolmahdi; Janghorbani, Mohsen; Jamali, Nahid; Gholamrezaei, Ali

    2012-01-01

    Aim. Atypical presentations of celiac disease (CD) have now been shown to be much more common than classical (typical) form. We evaluated the frequency of CD among adult patients with typical or atypical symptoms of CD. Materials and Methods. Patients referred to two outpatient gastroenterology clinics in Isfahan (IRAN) were categorized into those with typical or atypical symptoms of CD. IgA antitissue transglutaminase antibody was assessed and followed by duodenal biopsy. In patients for whom endoscopy was indicated (independent of the serology), duodenal biopsy was taken. Histopathological changes were assessed according to the Marsh classification. Results. During the study period, 151 and 173 patients with typical and atypical symptoms were evaluated (mean age = 32.8 ± 12.6 and 35.8 ± 14.8 years, 47.0% and 56.0% female, resp.). Frequency of CD in patients with typical and atypical symptoms was calculated, respectively, as 5.9% (9/151) and 1.25% (3/173) based on positive serology and pathology. The overall frequency was estimated as at least 9.2% (14/151) and 4.0% (7/173) when data of seronegative patients were also considered. Conclusions. CD is more frequent among patients with typical symptoms of malabsorption and these patients should undergo duodenal biopsy, irrespective of the serology. In patients with atypical symptoms, serological tests should be performed followed by endoscopic biopsy, and routine duodenal biopsy is recommended when endoscopic evaluation is indicated because of symptoms.

  11. Frequency of Celiac Disease in Adult Patients with Typical or Atypical Malabsorption Symptoms in Isfahan, Iran

    Directory of Open Access Journals (Sweden)

    Mohammad Hassan Emami

    2012-01-01

    Full Text Available Aim. Atypical presentations of celiac disease (CD have now been shown to be much more common than classical (typical form. We evaluated the frequency of CD among adult patients with typical or atypical symptoms of CD. Materials and Methods. Patients referred to two outpatient gastroenterology clinics in Isfahan (IRAN were categorized into those with typical or atypical symptoms of CD. IgA antitissue transglutaminase antibody was assessed and followed by duodenal biopsy. In patients for whom endoscopy was indicated (independent of the serology, duodenal biopsy was taken. Histopathological changes were assessed according to the Marsh classification. Results. During the study period, 151 and 173 patients with typical and atypical symptoms were evaluated (mean age = 32.8±12.6 and 35.8±14.8 years, 47.0% and 56.0% female, resp.. Frequency of CD in patients with typical and atypical symptoms was calculated, respectively, as 5.9% (9/151 and 1.25% (3/173 based on positive serology and pathology. The overall frequency was estimated as at least 9.2% (14/151 and 4.0% (7/173 when data of seronegative patients were also considered. Conclusions. CD is more frequent among patients with typical symptoms of malabsorption and these patients should undergo duodenal biopsy, irrespective of the serology. In patients with atypical symptoms, serological tests should be performed followed by endoscopic biopsy, and routine duodenal biopsy is recommended when endoscopic evaluation is indicated because of symptoms.

  12. Time to discontinuation of atypical versus typical antipsychotics in the naturalistic treatment of schizophrenia

    Directory of Open Access Journals (Sweden)

    Swartz Marvin

    2006-02-01

    Full Text Available Abstract Background There is an ongoing debate over whether atypical antipsychotics are more effective than typical antipsychotics in the treatment of schizophrenia. This naturalistic study compares atypical and typical antipsychotics on time to all-cause medication discontinuation, a recognized index of medication effectiveness in the treatment of schizophrenia. Methods We used data from a large, 3-year, observational, non-randomized, multisite study of schizophrenia, conducted in the U.S. between 7/1997 and 9/2003. Patients who were initiated on oral atypical antipsychotics (clozapine, olanzapine, risperidone, quetiapine, or ziprasidone or oral typical antipsychotics (low, medium, or high potency were compared on time to all-cause medication discontinuation for 1 year following initiation. Treatment group comparisons were based on treatment episodes using 3 statistical approaches (Kaplan-Meier survival analysis, Cox Proportional Hazards regression model, and propensity score-adjusted bootstrap resampling methods. To further assess the robustness of the findings, sensitivity analyses were performed, including the use of (a only 1 medication episode for each patient, the one with which the patient was treated first, and (b all medication episodes, including those simultaneously initiated on more than 1 antipsychotic. Results Mean time to all-cause medication discontinuation was longer on atypical (N = 1132, 256.3 days compared to typical antipsychotics (N = 534, 197.2 days; p Conclusion In the usual care of schizophrenia patients, time to medication discontinuation for any cause appears significantly longer for atypical than typical antipsychotics regardless of the typical antipsychotic potency level. Findings were primarily driven by clozapine and olanzapine, and to a lesser extent by risperidone. Furthermore, only clozapine and olanzapine therapy showed consistently and significantly longer treatment duration compared to perphenazine, a medium

  13. Spatial Resolution of the ECE for JET Typical Parameters

    International Nuclear Information System (INIS)

    Tribaldos, V.

    2000-01-01

    The purpose of this report is to obtain estimations of the spatial resolution of the electron cyclotron emission (ECE) phenomena for the typical plasmas found in JET tokamak. The analysis of the spatial resolution of the ECE is based on the underlying physical process of emission and a working definition is presented and discussed. In making these estimations a typical JET pulse is being analysed taking into account the magnetic configuration, the density and temperature profiles, obtained with the EFIT code and from the LIDAR diagnostic. Ray tracing simulations are performed for a Maxwellian plasma taking into account the antenna pattern. (Author) 5 refs

  14. Typicality effects in artificial categories: is there a hemisphere difference?

    Science.gov (United States)

    Richards, L G; Chiarello, C

    1990-07-01

    In category classification tasks, typicality effects are usually found: accuracy and reaction time depend upon distance from a prototype. In this study, subjects learned either verbal or nonverbal dot pattern categories, followed by a lateralized classification task. Comparable typicality effects were found in both reaction time and accuracy across visual fields for both verbal and nonverbal categories. Both hemispheres appeared to use a similarity-to-prototype matching strategy in classification. This indicates that merely having a verbal label does not differentiate classification in the two hemispheres.

  15. Determination of illuminants representing typical white light emitting diodes sources

    DEFF Research Database (Denmark)

    Jost, S.; Ngo, M.; Ferrero, A.

    2017-01-01

    is to develop LED-based illuminants that describe typical white LED products based on their Spectral Power Distributions (SPDs). Some of these new illuminants will be recommended in the update of the CIE publication 15 on colorimetry with the other typical illuminants, and among them, some could be used......Solid-state lighting (SSL) products are already in use by consumers and are rapidly gaining the lighting market. Especially, white Light Emitting Diode (LED) sources are replacing banned incandescent lamps and other lighting technologies in most general lighting applications. The aim of this work...... to complement the CIE standard illuminant A for calibration use in photometry....

  16. Computed tomography derived fractional flow reserve testing in stable patients with typical angina pectoris

    DEFF Research Database (Denmark)

    Møller Jensen, Jesper; Erik Bøtker, Hans; Norling Mathiassen, Ole

    2017-01-01

    Aims: To assess the use of downstream coronary angiography (ICA) and short-term safety of frontline coronary CT angiography (CTA) with selective CT-derived fractional flow reserve (FFRCT) testing in stable patients with typical angina pectoris. Methods and results: Between 1 January 2016 and 30 J...... of safe cancellation of planned ICAs....

  17. Recall Memory in Children with Down Syndrome and Typically Developing Peers Matched on Developmental Age

    Science.gov (United States)

    Milojevich, H.; Lukowski, A.

    2016-01-01

    Background: Whereas research has indicated that children with Down syndrome (DS) imitate demonstrated actions over short delays, it is presently unknown whether children with DS recall information over lengthy delays at levels comparable with typically developing (TD) children matched on developmental age. Method: In the present research, 10…

  18. Language Learning of Children with Typical Development Using a Deductive Metalinguistic Procedure

    Science.gov (United States)

    Finestack, Lizbeth H.

    2014-01-01

    Purpose: In the current study, the author aimed to determine whether 4- to 6-year-old typically developing children possess requisite problem-solving and language abilities to produce, generalize, and retain a novel verb inflection when taught using an explicit, deductive teaching procedure. Method: Study participants included a cross-sectional…

  19. Method

    Directory of Open Access Journals (Sweden)

    Ling Fiona W.M.

    2017-01-01

    Full Text Available Rapid prototyping of microchannel gain lots of attention from researchers along with the rapid development of microfluidic technology. The conventional methods carried few disadvantages such as high cost, time consuming, required high operating pressure and temperature and involve expertise in operating the equipment. In this work, new method adapting xurography method is introduced to replace the conventional method of fabrication of microchannels. The novelty in this study is replacing the adhesion film with clear plastic film which was used to cut the design of the microchannel as the material is more suitable for fabricating more complex microchannel design. The microchannel was then mold using polymethyldisiloxane (PDMS and bonded with a clean glass to produce a close microchannel. The microchannel produced had a clean edge indicating good master mold was produced using the cutting plotter and the bonding between the PDMS and glass was good where no leakage was observed. The materials used in this method is cheap and the total time consumed is less than 5 hours where this method is suitable for rapid prototyping of microchannel.

  20. Face-to-Face Interference in Typical and Atypical Development

    Science.gov (United States)

    Riby, Deborah M.; Doherty-Sneddon, Gwyneth; Whittle, Lisa

    2012-01-01

    Visual communication cues facilitate interpersonal communication. It is important that we look at faces to retrieve and subsequently process such cues. It is also important that we sometimes look away from faces as they increase cognitive load that may interfere with online processing. Indeed, when typically developing individuals hold face gaze…

  1. Gendered Perceptions of Typical Engineers across Specialties for Engineering Majors

    Science.gov (United States)

    Kelley, Margaret S.; Bryan, Kimberley K.

    2018-01-01

    Young women do not choose to be engineers nearly as often as young men, and they tend to cluster in particular specialties when they do. We examine these patterns and the role of gender schemas as applied to perceptions of typical engineers in understanding the choices that women make in terms of engineering specialties. We use Part 1 of two waves…

  2. The Roots of Disillusioned American Dream in Typical American

    Institute of Scientific and Technical Information of China (English)

    古冬华

    2016-01-01

    Typical American is one of Gish Jen’s notable novels catching attention of the American literary circle. The motif of disillusioned American dream can be seen clearly through the experiences of three main characters. From perspectives of the consumer culture and cultural conflicts, this paper analyzes the roots of the disillusioned American dream in the novel.

  3. Analogical Reasoning Ability in Autistic and Typically Developing Children

    Science.gov (United States)

    Morsanyi, Kinga; Holyoak, Keith J.

    2010-01-01

    Recent studies (e.g. Dawson et al., 2007) have reported that autistic people perform in the normal range on the Raven Progressive Matrices test, a formal reasoning test that requires integration of relations as well as the ability to infer rules and form high-level abstractions. Here we compared autistic and typically developing children, matched…

  4. Breast Metastases from Extramammary Malignancies: Typical and Atypical Ultrasound Features

    Energy Technology Data Exchange (ETDEWEB)

    Mun, Sung Hee [Department of Radiology and Center for Imaging Science, Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul 135-710 (Korea, Republic of); Department of Radiology, Catholic University of Daegu College of Medicine, Daegu 712-702 (Korea, Republic of); Ko, Eun Young; Han, Boo-Kyung; Shin, Jung Hee [Department of Radiology and Center for Imaging Science, Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul 135-710 (Korea, Republic of); Kim, Suk Jung [Department of Radiology, Inje University College of Medicine, Busan Paik Hospital, Busan 614-735 (Korea, Republic of); Cho, Eun Yoon [Department of Pathology, Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul 135-710 (Korea, Republic of)

    2014-07-01

    Breast metastases from extramammary malignancies are uncommon. The most common sources are lymphomas/leukemias and melanomas. Some of the less common sources include carcinomas of the lung, ovary, and stomach, and infrequently, carcinoid tumors, hypernephromas, carcinomas of the liver, tonsil, pleura, pancreas, cervix, perineum, endometrium and bladder. Breast metastases from extramammary malignancies have both hematogenous and lymphatic routes. According to their routes, there are common radiological features of metastatic diseases of the breast, but the features are not specific for metastases. Typical ultrasound (US) features of hematogenous metastases include single or multiple, round to oval shaped, well-circumscribed hypoechoic masses without spiculations, calcifications, or architectural distortion; these masses are commonly located superficially in subcutaneous tissue or immediately adjacent to the breast parenchyma that is relatively rich in blood supply. Typical US features of lymphatic breast metastases include diffusely and heterogeneously increased echogenicities in subcutaneous fat and glandular tissue and a thick trabecular pattern with secondary skin thickening, lymphedema, and lymph node enlargement. However, lesions show variable US features in some cases, and differentiation of these lesions from primary breast cancer or from benign lesions is difficult. In this review, we demonstrate various US appearances of breast metastases from extramammary malignancies as typical and atypical features, based on the results of US and other imaging studies performed at our institution. Awareness of the typical and atypical imaging features of these lesions may be helpful to diagnose metastatic lesions of the breast.

  5. Physico-chemical properties and fertility status of some typic ...

    African Journals Online (AJOL)

    Physico-chemical properties and fertility status of some typic plinthaquults in bauchi loval government area of Bauchi state, Nigeria. S Mustapha. Abstract. No Abstract. IJOTAFS Vol. 1 (2) 2007: pp. 120-124. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  6. Spectra of conditionalization and typicality in the multiverse

    Science.gov (United States)

    Azhar, Feraz

    2016-02-01

    An approach to testing theories describing a multiverse, that has gained interest of late, involves comparing theory-generated probability distributions over observables with their experimentally measured values. It is likely that such distributions, were we indeed able to calculate them unambiguously, will assign low probabilities to any such experimental measurements. An alternative to thereby rejecting these theories, is to conditionalize the distributions involved by restricting attention to domains of the multiverse in which we might arise. In order to elicit a crisp prediction, however, one needs to make a further assumption about how typical we are of the chosen domains. In this paper, we investigate interactions between the spectra of available assumptions regarding both conditionalization and typicality, and draw out the effects of these interactions in a concrete setting; namely, on predictions of the total number of species that contribute significantly to dark matter. In particular, for each conditionalization scheme studied, we analyze how correlations between densities of different dark matter species affect the prediction, and explicate the effects of assumptions regarding typicality. We find that the effects of correlations can depend on the conditionalization scheme, and that in each case atypicality can significantly change the prediction. In doing so, we demonstrate the existence of overlaps in the predictions of different "frameworks" consisting of conjunctions of theory, conditionalization scheme and typicality assumption. This conclusion highlights the acute challenges involved in using such tests to identify a preferred framework that aims to describe our observational situation in a multiverse.

  7. 7 CFR 632.52 - Identifying typical classes of action.

    Science.gov (United States)

    2010-01-01

    ... § 632.52 Identifying typical classes of action. (a) The RFO will analyze the environmental assessment of....12. These actions are determined by a limited environmental assessment that reasonably identifies the... 632.52 Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES...

  8. Characteristics of typical Pierce guns for PPM focused TWTs

    International Nuclear Information System (INIS)

    Harper, R.; Puri, M.P.

    1989-01-01

    The performance of typical moderate perveance Pierce type electron guns which are used in periodic permanent magnet focused traveling wave tubes are described with regard to adaptation for use in electron beam ion sources. The results of detailed electron trajectory computations for one particular gun design are presented

  9. Human Behavior, Learning, and the Developing Brain: Typical Development

    Science.gov (United States)

    Coch, Donna, Ed.; Fischer, Kurt W., Ed.; Dawson, Geraldine, Ed.

    2010-01-01

    This volume brings together leading authorities from multiple disciplines to examine the relationship between brain development and behavior in typically developing children. Presented are innovative cross-sectional and longitudinal studies that shed light on brain-behavior connections in infancy and toddlerhood through adolescence. Chapters…

  10. Breast Metastases from Extramammary Malignancies: Typical and Atypical Ultrasound Features

    International Nuclear Information System (INIS)

    Mun, Sung Hee; Ko, Eun Young; Han, Boo-Kyung; Shin, Jung Hee; Kim, Suk Jung; Cho, Eun Yoon

    2014-01-01

    Breast metastases from extramammary malignancies are uncommon. The most common sources are lymphomas/leukemias and melanomas. Some of the less common sources include carcinomas of the lung, ovary, and stomach, and infrequently, carcinoid tumors, hypernephromas, carcinomas of the liver, tonsil, pleura, pancreas, cervix, perineum, endometrium and bladder. Breast metastases from extramammary malignancies have both hematogenous and lymphatic routes. According to their routes, there are common radiological features of metastatic diseases of the breast, but the features are not specific for metastases. Typical ultrasound (US) features of hematogenous metastases include single or multiple, round to oval shaped, well-circumscribed hypoechoic masses without spiculations, calcifications, or architectural distortion; these masses are commonly located superficially in subcutaneous tissue or immediately adjacent to the breast parenchyma that is relatively rich in blood supply. Typical US features of lymphatic breast metastases include diffusely and heterogeneously increased echogenicities in subcutaneous fat and glandular tissue and a thick trabecular pattern with secondary skin thickening, lymphedema, and lymph node enlargement. However, lesions show variable US features in some cases, and differentiation of these lesions from primary breast cancer or from benign lesions is difficult. In this review, we demonstrate various US appearances of breast metastases from extramammary malignancies as typical and atypical features, based on the results of US and other imaging studies performed at our institution. Awareness of the typical and atypical imaging features of these lesions may be helpful to diagnose metastatic lesions of the breast

  11. Typical School Day Experiences of Indian Children in Different Contexts.

    Science.gov (United States)

    Jaya, N.; Malar, G.

    2003-01-01

    Notes that India has experienced conditions that have lead to significant illiteracy, but that commitment to education can be found in lesser-known parts of India today. Profiles three schools in Tamil Nadu and describes a typical school day for a student with special needs, a student in a tribal setting, and a student in a rural setting. (TJQ)

  12. Typical and Atypical Dementia Family Caregivers: Systematic and Objective Comparisons

    Science.gov (United States)

    Nichols, Linda O.; Martindale-Adams, Jennifer; Burns, Robert; Graney, Marshall J.; Zuber, Jeffrey

    2011-01-01

    This systematic, objective comparison of typical (spouse, children) and atypical (in-law, sibling, nephew/niece, grandchild) dementia family caregivers examined demographic, caregiving and clinical variables. Analysis was of 1,476 caregivers, of whom 125 were atypical, from the Resources for Enhancing Alzheimer's Caregivers Health (REACH I and II)…

  13. Creating Effective Dialogue Around Climate Change

    Science.gov (United States)

    Kiehl, J. T.

    2015-12-01

    Communicating climate change to people from diverse sectors of society has proven to be difficult in the United States. It is widely recognized that difficulties arise from a number of sources, including: basic science understanding, the psychologically affect laden content surrounding climate change, and the diversity of value systems that exist in our society. I explore ways of working with the affect that arises around climate change and describe specific methods to work with the resistance often encountered when communicating this important issue. The techniques I describe are rooted in psychology and group process and provide means for creating more effective narratives to break through the barriers to communicating climate change science. Examples are given from personal experiences in presenting climate change to diverse groups.

  14. Creating marketing strategies for higher education institutions

    Directory of Open Access Journals (Sweden)

    Lidia Białoń

    2015-12-01

    Full Text Available The article presents a thesis that the primary premise of creating marketing strategies for higher education institution is a three-dimensional notion of marketing. The first dimension lies in the theoretical notions of the essence of marketing, including the transactional marketing (1.0, relationship marketing (2.0 and spiritual marketing (3.0. The second dimension is formed by methods of marketing research and accurate notions of marketing, while the third are channels of marketing information. Harmonizing these three dimensions is a precondition for effective marketing. Among other conditions for effective strategies there are: aligning goals of the chosen strategy with the mission of higher education institution, correct choice of targeted segments of the market and of marketing tools. The article also gives a sample classification of marketing strategies based on these criteria, with emphasis on the fact, that every higher education institution employs its own strategy.

  15. How to create high-performing teams.

    Science.gov (United States)

    Lam, Samuel M

    2010-02-01

    This article is intended to discuss inspirational aspects on how to lead a high-performance team. Cogent topics discussed include how to hire staff through methods of "topgrading" with reference to Geoff Smart and "getting the right people on the bus" referencing Jim Collins' work. In addition, once the staff is hired, this article covers how to separate the "eagles from the ducks" and how to inspire one's staff by creating the right culture with suggestions for further reading by Don Miguel Ruiz (The four agreements) and John Maxwell (21 Irrefutable laws of leadership). In addition, Simon Sinek's concept of "Start with Why" is elaborated to help a leader know what the core element should be with any superior culture. Thieme Medical Publishers.

  16. An interactive system for creating object models from range data based on simulated annealing

    International Nuclear Information System (INIS)

    Hoff, W.A.; Hood, F.W.; King, R.H.

    1997-01-01

    In hazardous applications such as remediation of buried waste and dismantlement of radioactive facilities, robots are an attractive solution. Sensing to recognize and locate objects is a critical need for robotic operations in unstructured environments. An accurate 3-D model of objects in the scene is necessary for efficient high level control of robots. Drawing upon concepts from supervisory control, the authors have developed an interactive system for creating object models from range data, based on simulated annealing. Site modeling is a task that is typically performed using purely manual or autonomous techniques, each of which has inherent strengths and weaknesses. However, an interactive modeling system combines the advantages of both manual and autonomous methods, to create a system that has high operator productivity as well as high flexibility and robustness. The system is unique in that it can work with very sparse range data, tolerate occlusions, and tolerate cluttered scenes. The authors have performed an informal evaluation with four operators on 16 different scenes, and have shown that the interactive system is superior to either manual or automatic methods in terms of task time and accuracy

  17. method

    Directory of Open Access Journals (Sweden)

    L. M. Kimball

    2002-01-01

    Full Text Available This paper presents an interior point algorithm to solve the multiperiod hydrothermal economic dispatch (HTED. The multiperiod HTED is a large scale nonlinear programming problem. Various optimization methods have been applied to the multiperiod HTED, but most neglect important network characteristics or require decomposition into thermal and hydro subproblems. The algorithm described here exploits the special bordered block diagonal structure and sparsity of the Newton system for the first order necessary conditions to result in a fast efficient algorithm that can account for all network aspects. Applying this new algorithm challenges a conventional method for the use of available hydro resources known as the peak shaving heuristic.

  18. The emergence of typical entanglement in two-party random processes

    International Nuclear Information System (INIS)

    Dahlsten, O C O; Oliveira, R; Plenio, M B

    2007-01-01

    We investigate the entanglement within a system undergoing a random, local process. We find that there is initially a phase of very fast generation and spread of entanglement. At the end of this phase the entanglement is typically maximal. In Oliveira et al (2007 Phys. Rev. Lett. 98 130502) we proved that the maximal entanglement is reached to a fixed arbitrary accuracy within O(N 3 ) steps, where N is the total number of qubits. Here we provide a detailed and more pedagogical proof. We demonstrate that one can use the so-called stabilizer gates to simulate this process efficiently on a classical computer. Furthermore, we discuss three ways of identifying the transition from the phase of rapid spread of entanglement to the stationary phase: (i) the time when saturation of the maximal entanglement is achieved, (ii) the cutoff moment, when the entanglement probability distribution is practically stationary, and (iii) the moment block entanglement exhibits volume scaling. We furthermore investigate the mixed state and multipartite setting. Numerically, we find that the mutual information appears to behave similarly to the quantum correlations and that there is a well-behaved phase-space flow of entanglement properties towards an equilibrium. We describe how the emergence of typical entanglement can be used to create a much simpler tripartite entanglement description. The results form a bridge between certain abstract results concerning typical (also known as generic) entanglement relative to an unbiased distribution on pure states and the more physical picture of distributions emerging from random local interactions

  19. Hybrid membrane contactor system for creating semi-breathing air

    Science.gov (United States)

    Timofeev, D. V.

    2012-02-01

    Typically, the equipment to create an artificial climate does not involve changing the composition of the respiratory air. In particular in medical institutions assumes the existence of plant of artificial climate and disinfection in operating rooms and intensive care wards. The use of a hybrid membrane-absorption systems for the generation of artificial atmospheres are improving the respiratory system, blood is enriched or depleted of various gases, resulting in increased stamina, there is a better, faster or slower metabolism, improves concentration and memory. Application of the system contributes to easy and rapid recovery after the operation. By adding a special component, with drug activity, air ionization, and adjust its composition, you can create a special, more favorable for patients with the atmosphere. These factors allow for the treatment and rehabilitation of patients and reduce mortality of heavy patients.

  20. Easi-CRISPR for creating knock-in and conditional knockout mouse models using long ssDNA donors.

    Science.gov (United States)

    Miura, Hiromi; Quadros, Rolen M; Gurumurthy, Channabasavaiah B; Ohtsuka, Masato

    2018-01-01

    CRISPR/Cas9-based genome editing can easily generate knockout mouse models by disrupting the gene sequence, but its efficiency for creating models that require either insertion of exogenous DNA (knock-in) or replacement of genomic segments is very poor. The majority of mouse models used in research involve knock-in (reporters or recombinases) or gene replacement (e.g., conditional knockout alleles containing exons flanked by LoxP sites). A few methods for creating such models have been reported that use double-stranded DNA as donors, but their efficiency is typically 1-10% and therefore not suitable for routine use. We recently demonstrated that long single-stranded DNAs (ssDNAs) serve as very efficient donors, both for insertion and for gene replacement. We call this method efficient additions with ssDNA inserts-CRISPR (Easi-CRISPR) because it is a highly efficient technology (efficiency is typically 30-60% and reaches as high as 100% in some cases). The protocol takes ∼2 months to generate the founder mice.

  1. Categorisation of typical vulnerability patterns in global drylands

    NARCIS (Netherlands)

    Sietz, D.; Lûdeke, M.K.B.; Walther, C.

    2011-01-01

    Drylands display specific vulnerability-creating mechanisms which threaten ecosystems and human well-being. The upscaling of successful interventions to reduce vulnerability arises as an important, but challenging aim, since drylands are not homogenous. To support this aim, we present the first

  2. Narrative versus Style : Effect of Genre Typical Events versus Genre Typical Filmic Realizations on Film Viewers' Genre Recognition

    NARCIS (Netherlands)

    Visch, V.; Tan, E.

    2008-01-01

    This study investigated whether film viewers recognize four basic genres (comic, drama, action and nonfiction) on the basis of genre-typical event cues or of genretypical filmic realization cues of events. Event cues are similar to the narrative content of a film sequence, while filmic realization

  3. Method to create gradient index in a polymer

    Science.gov (United States)

    Dirk, Shawn M; Johnson, Ross Stefan; Boye, Robert; Descour, Michael R; Sweatt, William C; Wheeler, David R; Kaehr, Bryan James

    2014-10-14

    Novel photo-writable and thermally switchable polymeric materials exhibit a refractive index change of .DELTA.n.gtoreq.1.0 when exposed to UV light or heat. For example, lithography can be used to convert a non-conjugated precursor polymer to a conjugated polymer having a higher index-of-refraction. Further, two-photon lithography can be used to pattern high-spatial frequency structures.

  4. Interpolation methods for creating a scatter radiation exposure map

    Energy Technology Data Exchange (ETDEWEB)

    Gonçalves, Elicardo A. de S., E-mail: elicardo.goncalves@ifrj.edu.br [Instituto Federal do Rio de Janeiro (IFRJ), Paracambi, RJ (Brazil); Gomes, Celio S.; Lopes, Ricardo T. [Coordenacao de Pos-Graduacao e Pesquisa de Engenharia (PEN/COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear; Oliveira, Luis F. de; Anjos, Marcelino J. dos; Oliveira, Davi F. [Universidade do Estado do Rio de Janeiro (UFRJ), RJ (Brazil). Instituto de Física

    2017-07-01

    A well know way for best comprehension of radiation scattering during a radiography is to map exposure over the space around the source and sample. This map is done measuring exposure in points regularly spaced, it means, measurement will be placed in localization chosen by increasing a regular steps from a starting point, along the x, y and z axes or even radial and angular coordinates. However, it is not always possible to maintain the accuracy of the steps throughout the entire space, or there will be regions of difficult access where the regularity of the steps will be impaired. This work intended to use some interpolation techniques that work with irregular steps, and to compare their results and their limits. It was firstly done angular coordinates, and tested in lack of some points. Later, in the same data was performed the Delaunay tessellation interpolation ir order to compare. Computational and graphic treatments was done with the GNU OCTAVE software and its image-processing package. Real data was acquired from a bunker where a 6 MeV betatron can be used to produce radiation scattering. (author)

  5. Interpolation methods for creating a scatter radiation exposure map

    International Nuclear Information System (INIS)

    Gonçalves, Elicardo A. de S.; Gomes, Celio S.; Lopes, Ricardo T.; Oliveira, Luis F. de; Anjos, Marcelino J. dos; Oliveira, Davi F.

    2017-01-01

    A well know way for best comprehension of radiation scattering during a radiography is to map exposure over the space around the source and sample. This map is done measuring exposure in points regularly spaced, it means, measurement will be placed in localization chosen by increasing a regular steps from a starting point, along the x, y and z axes or even radial and angular coordinates. However, it is not always possible to maintain the accuracy of the steps throughout the entire space, or there will be regions of difficult access where the regularity of the steps will be impaired. This work intended to use some interpolation techniques that work with irregular steps, and to compare their results and their limits. It was firstly done angular coordinates, and tested in lack of some points. Later, in the same data was performed the Delaunay tessellation interpolation ir order to compare. Computational and graphic treatments was done with the GNU OCTAVE software and its image-processing package. Real data was acquired from a bunker where a 6 MeV betatron can be used to produce radiation scattering. (author)

  6. Methods for creating generic E- & I-ship

    DEFF Research Database (Denmark)

    Lindgren, Peter; Knudsen, Henrik

    .   Whatever academic stance we may have on the psychological characteristics of innovation  and entrepreneurship , or the background, experience and attitudes of  entrepreneurs  . The educational systems have many options for increasing students competences and to improve innovation and entrepreneurial...... on the survival of entrepreneurs which necessitates a focus on securing the unique capabilities and ideas in the entrepreneurs business in a sustainable manner. Otherwise the society and the entrepreneurs will only stay innovative shortly and the business will be easy to copy and easy to compete against...... behaviour  - but the system often lack options on how to develop the commercialization process and the entrepreneurs to become central in the customer process. Only 1 out of 5 entrepreneurs survive the first year into business. Only 10 % of those who survive reach a level of more than 10 employees. Only 5...

  7. Creating networking adaptive interactive hybrid systems : A methodic approach

    NARCIS (Netherlands)

    Kester, L.J.

    2011-01-01

    Advances in network technologies enable distributed systems, operating in complex physical environments, to coordinate their activities over larger areas within shorter time intervals. Some envisioned application domains for such systems are defense, crisis management, traffic management, public

  8. Study on the three-station typical network deployments of workspace Measurement and Positioning System

    Science.gov (United States)

    Xiong, Zhi; Zhu, J. G.; Xue, B.; Ye, Sh. H.; Xiong, Y.

    2013-10-01

    As a novel network coordinate measurement system based on multi-directional positioning, workspace Measurement and Positioning System (wMPS) has outstanding advantages of good parallelism, wide measurement range and high measurement accuracy, which makes it to be the research hotspots and important development direction in the field of large-scale measurement. Since station deployment has a significant impact on the measurement range and accuracy, and also restricts the use-cost, the optimization method of station deployment was researched in this paper. Firstly, positioning error model was established. Then focusing on the small network consisted of three stations, the typical deployments and error distribution characteristics were studied. Finally, through measuring the simulated fuselage using typical deployments at the industrial spot and comparing the results with Laser Tracker, some conclusions are obtained. The comparison results show that under existing prototype conditions, I_3 typical deployment of which three stations are distributed in a straight line has an average error of 0.30 mm and the maximum error is 0.50 mm in the range of 12 m. Meanwhile, C_3 typical deployment of which three stations are uniformly distributed in the half-circumference of an circle has an average error of 0.17 mm and the maximum error is 0.28 mm. Obviously, C_3 typical deployment has a higher control effect on precision than I_3 type. The research work provides effective theoretical support for global measurement network optimization in the future work.

  9. CREATING AND PROCESSING A CORPUS

    Directory of Open Access Journals (Sweden)

    Prihantoro

    2015-05-01

    Full Text Available This paper seeks to describe some crucial importance of corpus and text processing. Corpus is a projection of how language is used by its speakers. Technology support has improved corpus for easier maintenance, made it space-saving, and it may electronically structure its data. The latest offers much freedom for corpus users to access and exploit it for language teaching, analysis or other specified tasks. This paper will demonstrate how to use open-access corpus on internet such as Corpus of Contemporary American English (COCA and British National Corpus (BNC. Besides how to use a corpus, another crucial importance that this paper seeks to describe is how to build a corpus. In this paper, the writer will use UNITEX, a corpus (text-based processing software. This software will demonstrate steps of corpus building, ranging from text collection, annotation, electronic dictionary application to some natural language based operations ranging from pattern matching, concordance, to simple extraction. It will show how graph technology may outperform regular expression, a retrieval method exploited by other corpus processor, in terms of writing output.

  10. SSI response of a typical shear wall structure

    International Nuclear Information System (INIS)

    Johnson, J.J.; Maslenikov, O.R.; Schewe, E.C.

    1985-01-01

    The seismic response of a typical shear structure in a commercial nuclear power plant was investigated for a series of site and foundation conditions using best estimate and design procedures. The structure selected is a part of the Zion AFT complex which is a connected group of reinforced concrete shear wall buildings, typical of nuclear power plant structures. Comparisons between best estimate responses quantified the effects of placing the structure on different sites and founding it in different manners. Calibration factors were developed by comparing simplified SSI design procedure responses to responses calculated by best estimate procedures. Nineteen basic cases were analyzed - each case was analyzed for ten earthquakes targeted to the NRC R.G. 1.60 design response spectra. The structure is a part of the Zion auxiliary-fuel handling turbine building (AFT) complex to the Zion nuclear power plants. (orig./HP)

  11. Analysis of typical meteorological years in different climates of China

    International Nuclear Information System (INIS)

    Yang, Liu; Lam, Joseph C.; Liu, Jiaping

    2007-01-01

    Typical meteorological years (TMYs) for 60 cities in the five major climatic zones (severe cold, cold, hot summer and cold winter, hot summer and warm winter, mild) in China were investigated. Long term (1971-2000) measured weather data such as dry bulb and dew point temperatures, wind speed and global solar radiation were gathered and analysed. A total of seven climatic indices were used to select the 12 typical meteorological months (TMMs) that made up the TMY for each city. In general, the cumulative distribution functions of the TMMs selected tended to follow their long term counterparts quite well. There was no persistent trend in any particular years being more representative than the others, though 1978 and 1982 tended to be picked most often. This paper presents the work and its findings. Future work on the assessment of TMYs in building energy simulation is also discussed

  12. Memory for radio advertisements: the effect of program and typicality.

    Science.gov (United States)

    Martín-Luengo, Beatriz; Luna, Karlos; Migueles, Malen

    2013-01-01

    We examined the influence of the type of radio program on the memory for radio advertisements. We also investigated the role in memory of the typicality (high or low) of the elements of the products advertised. Participants listened to three types of programs (interesting, boring, enjoyable) with two advertisements embedded in each. After completing a filler task, the participants performed a true/false recognition test. Hits and false alarm rates were higher for the interesting and enjoyable programs than for the boring one. There were also more hits and false alarms for the high-typicality elements. The response criterion for the advertisements embedded in the boring program was stricter than for the advertisements in other types of programs. We conclude that the type of program in which an advertisement is inserted and the nature of the elements of the advertisement affect both the number of hits and false alarms and the response criterion, but not the accuracy of the memory.

  13. Verbal communication skills in typical language development: a case series.

    Science.gov (United States)

    Abe, Camila Mayumi; Bretanha, Andreza Carolina; Bozza, Amanda; Ferraro, Gyovanna Junya Klinke; Lopes-Herrera, Simone Aparecida

    2013-01-01

    The aim of the current study was to investigate verbal communication skills in children with typical language development and ages between 6 and 8 years. Participants were 10 children of both genders in this age range without language alterations. A 30-minute video of each child's interaction with an adult (father and/or mother) was recorded, fully transcribed, and analyzed by two trained researchers in order to determine reliability. The recordings were analyzed according to a protocol that categorizes verbal communicative abilities, including dialogic, regulatory, narrative-discursive, and non-interactive skills. The frequency of use of each category of verbal communicative ability was analyzed (in percentage) for each subject. All subjects used more dialogical and regulatory skills, followed by narrative-discursive and non-interactive skills. This suggests that children in this age range are committed to continue dialog, which shows that children with typical language development have more dialogic interactions during spontaneous interactions with a familiar adult.

  14. Monte Carlo based radial shield design of typical PWR reactor

    Energy Technology Data Exchange (ETDEWEB)

    Gul, Anas; Khan, Rustam; Qureshi, M. Ayub; Azeem, Muhammad Waqar; Raza, S.A. [Pakistan Institute of Engineering and Applied Sciences, Islamabad (Pakistan). Dept. of Nuclear Engineering; Stummer, Thomas [Technische Univ. Wien (Austria). Atominst.

    2017-04-15

    This paper presents the radiation shielding model of a typical PWR (CNPP-II) at Chashma, Pakistan. The model was developed using Monte Carlo N Particle code [2], equipped with ENDF/B-VI continuous energy cross section libraries. This model was applied to calculate the neutron and gamma flux and dose rates in the radial direction at core mid plane. The simulated results were compared with the reference results of Shanghai Nuclear Engineering Research and Design Institute (SNERDI).

  15. Typical event horizons in AdS/CFT

    Energy Technology Data Exchange (ETDEWEB)

    Avery, Steven G.; Lowe, David A. [Department of Physics, Brown University,Providence, RI 02912 (United States)

    2016-01-14

    We consider the construction of local bulk operators in a black hole background dual to a pure state in conformal field theory. The properties of these operators in a microcanonical ensemble are studied. It has been argued in the literature that typical states in such an ensemble contain firewalls, or otherwise singular horizons. We argue this conclusion can be avoided with a proper definition of the interior operators.

  16. Typical event horizons in AdS/CFT

    Science.gov (United States)

    Avery, Steven G.; Lowe, David A.

    2016-01-01

    We consider the construction of local bulk operators in a black hole background dual to a pure state in conformal field theory. The properties of these operators in a microcanonical ensemble are studied. It has been argued in the literature that typical states in such an ensemble contain firewalls, or otherwise singular horizons. We argue this conclusion can be avoided with a proper definition of the interior operators.

  17. Analysis and Comparison of Typical Models within Distribution Network Design

    DEFF Research Database (Denmark)

    Jørgensen, Hans Jacob; Larsen, Allan; Madsen, Oli B.G.

    This paper investigates the characteristics of typical optimisation models within Distribution Network Design. During the paper fourteen models known from the literature will be thoroughly analysed. Through this analysis a schematic approach to categorisation of distribution network design models...... for educational purposes. Furthermore, the paper can be seen as a practical introduction to network design modelling as well as a being an art manual or recipe when constructing such a model....

  18. Typically Female Features in Hungarian Shopping Tourism

    Directory of Open Access Journals (Sweden)

    Gábor Michalkó

    2006-06-01

    Full Text Available Although shopping has been long acknowledged as a major tourist activity, the extent and characteristics of shopping tourism have only recently become the subject of academic research and discussion. As a contribution to this field of knowledge, the paper presents the characteristics of shopping tourism in Hungary, and discusses the typically female features of outbound Hungarian shopping tourism. The research is based on a survey of 2473 Hungarian tourists carried out in 2005. As the findings of the study indicate, while female respondents were altogether more likely to be involved in tourist shopping than male travellers, no significant difference was experienced between the genders concerning the share of shopping expenses compared to their total travel budget. In their shopping behaviour, women were typically affected by price levels, and they proved to be both more selfish and more altruistic than men by purchasing more products for themselves and for their family members. The most significant differences between men and women were found in their product preferences as female tourists were more likely to purchase typically feminine goods such as clothes, shoes, bags and accessories, in the timing of shopping activities while abroad, and in the information sources used by tourists, since interpersonal influences such as friends’, guides’ and fellow travellers’ recommendations played a higher role in female travellers’ decisions.

  19. Creating photo-realistic works in a 3D scene using layers styles to create an animation

    Science.gov (United States)

    Avramescu, A. M.

    2015-11-01

    Creating realist objects in a 3D scene is not an easy work. We have to be very careful to make the creation very detailed. If we don't know how to make these photo-realistic works, by using the techniques and a good reference photo we can create an amazing amount of detail and realism. For example, in this article there are some of these detailed methods from which we can learn the techniques necessary to make beautiful and realistic objects in a scene. More precisely, in this paper, we present how to create a 3D animated scene, mainly using the Pen Tool and Blending Options. Indeed, this work is based on teaching some simple ways of using the Layer Styles to create some great shadows, lights, textures and a realistic sense of 3 Dimension. The present work involves also showing how some interesting ways of using the illuminating and rendering options can create a realistic effect in a scene. Moreover, this article shows how to create photo realistic 3D models from a digital image. The present work proposes to present how to use Illustrator paths, texturing, basic lighting and rendering, how to apply textures and how to parent the building and objects components. We also propose to use this proposition to recreate smaller details or 3D objects from a 2D image. After a critic art stage, we are able now to present in this paper the architecture of a design method that proposes to create an animation. The aim is to create a conceptual and methodological tutorial to address this issue both scientifically and in practice. This objective also includes proposing, on strong scientific basis, a model that gives the possibility of a better understanding of the techniques necessary to create a realistic animation.

  20. Case Reports of Cat Scratch Disease with Typical and Atypical Clinical Manifestations: A Literature Review

    Directory of Open Access Journals (Sweden)

    Gulshan Umbreen

    2017-04-01

    Full Text Available Cat scratch disease (CSD is the most well-known zoonotic disease spread by domestic animals like cats. Cats are the source of Bartonella henselae. Most patients more than ninety percent 3-12 days after a scratch from a cat, undoubtedly a little cat with insects present with one or more erythematous injuries at the site of inoculation, the sore is typically a crusted papule or, once in a while, a pustule. More than half of cases in one study show that the systemic indications went with the lymphadenopathy. These may incorporate fever, discomfort, migraine and anorexia and frequently happen in immunocompromised patients. Atypically clinical manifestations happen are altered mental status, perplexity, prolonged fever, respiratory protestations (atypical pneumonitis, Joint pain, synovitis, Back agony is uncommon. The hypothesis of the study to find out that cat scratch disease cause typical and atypical clinical manifestation. Study was conducted July 2015 to September 2015. The methodology sections of a review article are listed all of the databases and citation indexes that were searched such as Web of Science and PubMed and any individual journals that were searched. Various case reports were mentioned in the study. Case reports of cat scratch diseases with typical and atypical clinical manifestation included in the study. The objective of review of these reporting cases is to make physicians aware about cat scratch diseases and also need to create awareness about cat scratch disease in pet owner. Although it is self-limiting needs to report to health authorities. There are few cases reported in which mostly cases reported in twain, japan, Brazil, Texas, United States, Dhaka, Spain with typical and atypical clinical manifestation

  1. Creating internal culture to ensure transparency

    International Nuclear Information System (INIS)

    Hayden, E.

    2007-01-01

    Among the keys to achieving public confidence, is openness and transparency to those one serves. As a Federal regulator entrusted by the American people to protect them against the hazards of radiation, the U.S. Nuclear Regulatory Commission recognizes the need for openness and a strong 'safety culture and climate' where there is a 'safety-first focus' by its employees as well as those it regulates. For the NRC and nuclear industry, safety culture is typically the assembly of characteristics and attitudes in organisations and individuals which establishes nuclear safety as an overriding priority. Strong safety cultures include conservative decision making, strict adherence to procedures, questioning attitudes, and an environment in which employees feel free to raise safety concerns. A strong internal safety culture that is transparent to others helps the NRC to be more effective in carrying out its safety job to protect the public through its oversight of the nation's nuclear power plants and other civilian uses of nuclear energy. Creating the appropriate environment or culture and communicating NBC's contribution to safety can affect employee and ultimately public perceptions about the agency's commitment to safety in its daily activities. Where there is openness and transparency, trust and confidence are likely to follow. To assess and measure its safety culture, the NRC commissioned three independent surveys to be performed in conjunction with some use of focus groups over an 8-year period. The results identified strengths and weakness, and were compared to previous survey results as well as to other U.S. government organisations and national benchmarks. Perhaps the most surprising results came from the 2002 survey that found a third of NRC employees questioned the agency's commitment to safety, and almost half of the staff said that they did not feel it was safe to speak up in the agency. Some changes at the agency were made and the 2005 survey results showed

  2. Narrative versus Style: Effect of Genre Typical Events versus Genre Typical Filmic Realizations on Film Viewers' Genre Recognition

    OpenAIRE

    Visch, V.; Tan, E.

    2008-01-01

    This study investigated whether film viewers recognize four basic genres (comic, drama, action and nonfiction) on the basis of genre-typical event cues or of genretypical filmic realization cues of events. Event cues are similar to the narrative content of a film sequence, while filmic realization cues are similar to stylistic surface cues of a film sequence. It was predicted that genre recognition of short film fragments is cued more by filmic realization cues than by event cues. The results...

  3. Creating and Viewing HTML Files with Python

    Directory of Open Access Journals (Sweden)

    William J. Turkel

    2012-07-01

    Full Text Available This lesson uses Python to create and view an HTML file. If you write programs that output HTML, you can use any browser to look at your results. This is especially convenient if your program is automatically creating hyperlinks or graphic entities like charts and diagrams. Here you will learn how to create HTML files with Python scripts, and how to use Python to automatically open an HTML file in Firefox.

  4. Creating and Viewing HTML Files with Python

    OpenAIRE

    William J. Turkel; Adam Crymble

    2012-01-01

    This lesson uses Python to create and view an HTML file. If you write programs that output HTML, you can use any browser to look at your results. This is especially convenient if your program is automatically creating hyperlinks or graphic entities like charts and diagrams. Here you will learn how to create HTML files with Python scripts, and how to use Python to automatically open an HTML file in Firefox.

  5. Comparison of mammographic and sonographic findings in typical and atypical medullary carcinomas of the breast

    International Nuclear Information System (INIS)

    Yilmaz, E.; Lebe, B.; Balci, P.; Sal, S.; Canda, T.

    2002-01-01

    AIM: The aim of this study was to describe the contribution of mammographic and sonographic findings to the discrimination of typical and atypical histopathologic groups of medullary carcinomas of the breast. MATERIALS AND METHODS: Imaging findings were retrospectively assessed in 33 women with medullary carcinomas (15 typical medullary carcinomas and 18 atypical medullary carcinomas) identified during pre-operative mammography. Twenty-nine of these women also had ultrasound and these findings were reviewed. RESULTS: Mammography showed a well circumscribed mass in 10 of the 15 (67%) typical medullary carcinomas and in four of the 17 (24%) atypical medullary carcinomas (P < 0.02). One small tumour in a woman with atypical medullary carcinoma was missed on mammography and was shown only on sonography. Sonographically, an irregular margin surrounding the whole mass or part of it was seen in three out of 14 (21%) patients with typical medullary carcinoma and in nine out of 15 (60%) patients with atypical medullary carcinomas (P < 0.05). Posterior acoustic shadowing was more often observed in the typical medullary carcinoma group than in atypical medullary carcinoma and the difference was found to be statistically significant (P < 0.05). None of the other mammographic and sonographic findings were sufficiently characteristic to allow for a differentiation between two groups. CONCLUSION: When typical medullary carcinomas were compared with atypical medullary carcinomas according to imaging features, they tended to be well circumscribed masses on both mammography and sonography, and a posterior acoustic shadow was not found on sonography. However, the imaging findings in these two subgroups often resembled each other and histopathology will always be required to confirm the diagnosis. Yilmaz, E. et al. (2002)

  6. Comparison of mammographic and sonographic findings in typical and atypical medullary carcinomas of the breast

    Energy Technology Data Exchange (ETDEWEB)

    Yilmaz, E.; Lebe, B.; Balci, P.; Sal, S.; Canda, T

    2002-07-01

    AIM: The aim of this study was to describe the contribution of mammographic and sonographic findings to the discrimination of typical and atypical histopathologic groups of medullary carcinomas of the breast. MATERIALS AND METHODS: Imaging findings were retrospectively assessed in 33 women with medullary carcinomas (15 typical medullary carcinomas and 18 atypical medullary carcinomas) identified during pre-operative mammography. Twenty-nine of these women also had ultrasound and these findings were reviewed. RESULTS: Mammography showed a well circumscribed mass in 10 of the 15 (67%) typical medullary carcinomas and in four of the 17 (24%) atypical medullary carcinomas (P < 0.02). One small tumour in a woman with atypical medullary carcinoma was missed on mammography and was shown only on sonography. Sonographically, an irregular margin surrounding the whole mass or part of it was seen in three out of 14 (21%) patients with typical medullary carcinoma and in nine out of 15 (60%) patients with atypical medullary carcinomas (P < 0.05). Posterior acoustic shadowing was more often observed in the typical medullary carcinoma group than in atypical medullary carcinoma and the difference was found to be statistically significant (P < 0.05). None of the other mammographic and sonographic findings were sufficiently characteristic to allow for a differentiation between two groups. CONCLUSION: When typical medullary carcinomas were compared with atypical medullary carcinomas according to imaging features, they tended to be well circumscribed masses on both mammography and sonography, and a posterior acoustic shadow was not found on sonography. However, the imaging findings in these two subgroups often resembled each other and histopathology will always be required to confirm the diagnosis. Yilmaz, E. et al. (2002)

  7. Dysphonia Severity Index in Typically Developing Indian Children.

    Science.gov (United States)

    Pebbili, Gopi Kishore; Kidwai, Juhi; Shabnam, Srushti

    2017-01-01

    Dysphonia is a variation in an individual's quality, pitch, or loudness from the voice characteristics typical of a speaker of similar age, gender, cultural background, and geographic location. Dysphonia Severity Index (DSI) is a recognized assessment tool based on a weighted combination of maximum phonation time, highest frequency, lowest intensity, and jitter (%) of an individual. Although dysphonia in adults is accurately evaluated using DSI, standard reference values for school-age children have not been studied. This study aims to document the DSI scores in typically developing children (8-12 years). A total of 42 typically developing children (8-12 years) without complaint of voice problem on the day of testing participated in the study. DSI was computed by substituting the raw scores of substituent parameters: maximum phonation time, highest frequency, lowest intensity, and jitter% using various modules of CSL 4500 software. The average DSI values obtained in children were 2.9 (1.23) and 3.8 (1.29) for males and females, respectively. DSI values are found to be significantly higher (P = 0.027) for females than those for males in Indian children. This could be attributed to the anatomical and behavioral differences among females and males. Further, pubertal changes set in earlier for females approximating an adult-like physiology, thereby leading to higher DSI values in them. The mean DSI value obtained for male and female Indian children can be used as a preliminary reference data against which the DSI values of school-age children with dysphonia can be compared. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  8. A generalized window energy rating system for typical office buildings

    Energy Technology Data Exchange (ETDEWEB)

    Tian, Cheng; Chen, Tingyao; Yang, Hongxing; Chung, Tse-ming [Research Center for Building Environmental Engineering, Department of Building Services Engineering, The Hong Kong Polytechnic University, Hong Kong (China)

    2010-07-15

    Detailed computer simulation programs require lengthy inputs, and cannot directly provide an insight to relationship between the window energy performance and the key window design parameters. Hence, several window energy rating systems (WERS) for residential houses and small buildings have been developed in different countries. Many studies showed that utilization of daylight through elaborate design and operation of windows leads to significant energy savings in both cooling and lighting in office buildings. However, the current WERSs do not consider daylighting effect, while most of daylighting analyses do not take into account the influence of convective and infiltration heat gains. Therefore, a generalized WERS for typical office buildings has been presented, which takes all primary influence factors into account. The model includes embodied and operation energy uses and savings by a window to fully reflect interactions among the influence parameters. Reference locations selected for artificial lighting and glare control in the current common simulation practice may cause uncompromised conflicts, which could result in over- or under-estimated energy performance. Widely used computer programs, DOE2 and ADELINE, for hourly daylighting and cooling simulations have their own weaknesses, which may result in unrealistic or inaccurate results. An approach is also presented for taking the advantages of the both programs and avoiding their weaknesses. The model and approach have been applied to a typical office building of Hong Kong as an example to demonstrate how a WERS in a particular location can be established and how well the model can work. The energy effect of window properties, window-to-wall ratio (WWR), building orientation and lighting control strategies have been analyzed, and can be indicated by the localized WERS. An application example also demonstrates that the algebraic WERS derived from simulation results can be easily used for the optimal design of

  9. Typical exposure of children to EMF: exposimetry and dosimetry

    International Nuclear Information System (INIS)

    Valic, Blaz; Kos, Bor; Gajsek, Peter

    2015-01-01

    A survey study with portable exposimeters, worn by 21 children under the age of 17, and detailed measurements in an apartment above a transformer substation were carried out to determine the typical individual exposure of children to extremely low- and radio-frequency (RF) electromagnetic field. In total, portable exposimeters were worn for >2400 h. Based on the typical individual exposure the in situ electric field and specific absorption rate (SAR) values were calculated for an 11-y-old female human model. The average exposure was determined to be low compared with ICNIRP reference levels: 0.29 μT for an extremely low frequency (ELF) magnetic field and 0.09 V m -1 for GSM base stations, 0.11 V m -1 for DECT and 0.10 V m -1 for WiFi; other contributions could be neglected. However, some of the volunteers were more exposed: the highest realistic exposure, to which children could be exposed for a prolonged period of time, was 1.35 μT for ELF magnetic field and 0.38 V m -1 for DECT, 0.13 V m -1 for WiFi and 0.26 V m -1 for GSM base stations. Numerical calculations of the in situ electric field and SAR values for the typical and the worst-case situation show that, compared with ICNIRP basic restrictions, the average exposure is low. In the typical exposure scenario, the extremely low frequency exposure is <0.03 % and the RF exposure <0.001 % of the corresponding basic restriction. In the worst-case situation, the extremely low frequency exposure is <0.11 % and the RF exposure <0.007 % of the corresponding basic restrictions. Analysis of the exposures and the individual's perception of being exposed/ unexposed to an ELF magnetic field showed that it is impossible to estimate the individual exposure to an ELF magnetic field based only on the information provided by the individuals, as they do not have enough knowledge and information to properly identify the sources in their vicinity. (authors)

  10. The Compositions: Biodegradable Material - Typical Resin, as Moulding Sands’ Binders

    Directory of Open Access Journals (Sweden)

    Major-Gabryś K.

    2015-03-01

    Full Text Available The paper presents possibility of using biodegradable materials as parts of moulding sands’ binders based on commonly used in foundry practice resins. The authors focus on thermal destruction of binding materials and thermal deformation of moulding sands with tested materials. All the research is conducted for the biodegradable material and two typical resins separately. The point of the article is to show if tested materials are compatible from thermal destruction and thermal deformation points of view. It was proved that tested materials characterized with similar thermal destruction but thermal deformation of moulding sands with those binders was different.

  11. Monte Carlo based radial shield design of typical PWR reactor

    Energy Technology Data Exchange (ETDEWEB)

    Gul, Anas; Khan, Rustam; Qureshi, M. Ayub; Azeem, Muhammad Waqar; Raza, S.A. [Pakistan Institute of Engineering and Applied Sciences, Islamabad (Pakistan). Dept. of Nuclear Engineering; Stummer, Thomas [Technische Univ. Wien (Austria). Atominst.

    2016-11-15

    Neutron and gamma flux and dose equivalent rate distribution are analysed in radial and shields of a typical PWR type reactor based on the Monte Carlo radiation transport computer code MCNP5. The ENDF/B-VI continuous energy cross-section library has been employed for the criticality and shielding analysis. The computed results are in good agreement with the reference results (maximum difference is less than 56 %). It implies that MCNP5 a good tool for accurate prediction of neutron and gamma flux and dose rates in radial shield around the core of PWR type reactors.

  12. Lipomatosis of the sciatic nerve: typical and atypical MRI features

    International Nuclear Information System (INIS)

    Wong, Bernadette Zhi Ying; Amrami, Kimberly K.; Wenger, Doris E.; Dyck, P. James B.; Scheithauer, Bernd W.; Spinner, Robert J.

    2006-01-01

    Lipomatosis of nerve, also known as fibrolipomatous hamartoma, is a rare condition of nerve, usually affecting the median nerve. The MRI appearance is characteristic. We describe two cases of lipomatosis of nerve involving the sciatic nerve, an extremely unusual location for this lesion, in patients with sciatic neuropathy. These cases share the typical features previously described in the literature for other nerves, but also contain atypical features not previously highlighted, relating to the variability in distribution and extent of the fatty deposition. Recognition of the MRI appearance of this entity is important in order to avoid unnecessary attempts at surgical resection of this lesion. (orig.)

  13. Characterising mechanical transmission wire ropes’ typical failure modes

    Directory of Open Access Journals (Sweden)

    Edgar Espejo

    2007-01-01

    Full Text Available The National University of Colombia’s Engineering School’s AFIS research group has helped several public and private institutions during the last five years in analysing the causes of failures presented in elevation and trans- port machinery leading to expensive consequences and even the loss of life. A group of typical wire rope failure modes have been identified, along with their common causes. These are presented in this work to offer help to our industry’s engineers and technicians, allowing them to identify possible risk situations in their routine work regarding the wire ropes which they use and approaches for carrying out wire rope failure analysis.

  14. Working memory training improves reading processes in typically developing children.

    Science.gov (United States)

    Loosli, Sandra V; Buschkuehl, Martin; Perrig, Walter J; Jaeggi, Susanne M

    2012-01-01

    The goal of this study was to investigate whether a brief cognitive training intervention results in a specific performance increase in the trained task, and whether there are transfer effects to other nontrained measures. A computerized, adaptive working memory intervention was conducted with 9- to 11-year-old typically developing children. The children considerably improved their performance in the trained working memory task. Additionally, compared to a matched control group, the experimental group significantly enhanced their reading performance after training, providing further evidence for shared processes between working memory and reading.

  15. Assessment of the quality seen in a restaurant typical theme

    Directory of Open Access Journals (Sweden)

    Francisco Alves Pinheiro

    2009-03-01

    Full Text Available To ensure the satisfaction of external customers it is necessary to know their needs. In this perspective, these work objectives assess the perception of quality by the customer outside of a restaurant located in the a restaurant typical theme located in the square of food “Bodódromo” the city of Petrolina/Pe. For both this was a case study, using the model servqual, Parasuraman et al (1985, for removal of information. The results indicated a need for improvement in the services provided by the restaurant.

  16. Using photoshop filters to create anatomic line-art medical images.

    Science.gov (United States)

    Kirsch, Jacobo; Geller, Brian S

    2006-08-01

    There are multiple ways to obtain anatomic drawings suitable for publication or presentations. This article demonstrates how to use Photoshop to alter digital radiologic images to create line-art illustrations in a quick and easy way. We present two simple to use methods; however, not every image can adequately be transformed and personal preferences and specific changes need to be applied to each image to obtain the desired result. There are multiple ways to obtain anatomic drawings suitable for publication or to prepare presentations. Medical illustrators have always played a major role in the radiology and medical education process. Whether used to teach a complex surgical or radiologic procedure, to define typical or atypical patterns of the spread of disease, or to illustrate normal or aberrant anatomy, medical illustration significantly affects learning (). However, if you are not an accomplished illustrator, the alternatives can be expensive (contacting a professional medical illustrator or buying an already existing stock of digital images) or simply not necessarily applicable to what you are trying to communicate. The purpose of this article is to demonstrate how using Photoshop (Adobe Systems, San Jose, CA) to alter digital radiologic images we can create line-art illustrations in a quick, inexpensive, and easy way in preparation for electronic presentations and publication.

  17. CREATING AN INFORMATIONAL WEBSITE FOR PHYSICS ACADEMIC COURSE: WEB DESIGN SPECIFICS

    Directory of Open Access Journals (Sweden)

    Іryna A. Slipukhina

    2017-12-01

    Full Text Available The article is devoted to the analysis of means and methods of creating an educational informational website for the Physics academic course. The stages of technical task creation, design of the main and typical pages of the website, layout, programming, content filling and publication are considered. The analysis of libraries, frameworks and popular WordPress and Joomla CMSes has been carried out as well as usability testing. Features of ready-made tools suitable for efficient creation of such web applications are considered. The contents of the front end and back end components of the given specification, as well as their connection with AJAX, are determined. The features of the WordPress architecture and the location of JSON files for the transmission of structured information are revealed. An original Student Score plugin for WordPress, that allows managing the contents of the e-register and displaying them for a teacher and students, as well as plugins for managing electronic laboratory reporting and user administration have been created.

  18. Plutonium-239 production rate study using a typical fusion reactor

    International Nuclear Information System (INIS)

    Faghihi, F.; Havasi, H.; Amin-Mozafari, M.

    2008-01-01

    The purpose of the present paper is to compute fissile 239 Pu material by supposed typical fusion reactor operation to make the fuel requirement for other purposes (e.g. MOX fissile fuel, etc.). It is assumed that there is a fusion reactor has a cylindrical geometry and uses uniformly distributed deuterium-tritium as fuel so that neutron wall load is taken at 10(MW)/(m 2 ) . Moreover, the reactor core is surrounded by six suggested blankets to make best performance of the physical conditions described herein. We determined neutron flux in each considered blanket as well as tritium self-sufficiency using two groups neutron energy and then computation is followed by the MCNP-4C code. Finally, material depletion according to a set of dynamical coupled differential equations is solved to estimate 239 Pu production rate. Produced 239 Pu is compared with two typical fission reactors to find performance of plutonium breeding ratio in the case of the fusion reactor. We found that 0.92% of initial U is converted into fissile Pu by our suggested fusion reactor with thermal power of 3000 MW. For comparison, 239 Pu yield of suggested large scale PWR is about 0.65% and for LMFBR is close to 1.7%. The results show that the fusion reactor has an acceptable efficiency for Pu production compared with a large scale PWR fission reactor type

  19. Plutonium-239 production rate study using a typical fusion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Faghihi, F. [Research Center for Radiation Protection, Shiraz University, Shiraz (Iran, Islamic Republic of)], E-mail: faghihif@shirazu.ac.ir; Havasi, H.; Amin-Mozafari, M. [Department of Nuclear Engineering, School of Engineering, Shiraz University, 71348-51154 Shiraz (Iran, Islamic Republic of)

    2008-05-15

    The purpose of the present paper is to compute fissile {sup 239}Pu material by supposed typical fusion reactor operation to make the fuel requirement for other purposes (e.g. MOX fissile fuel, etc.). It is assumed that there is a fusion reactor has a cylindrical geometry and uses uniformly distributed deuterium-tritium as fuel so that neutron wall load is taken at 10(MW)/(m{sup 2}) . Moreover, the reactor core is surrounded by six suggested blankets to make best performance of the physical conditions described herein. We determined neutron flux in each considered blanket as well as tritium self-sufficiency using two groups neutron energy and then computation is followed by the MCNP-4C code. Finally, material depletion according to a set of dynamical coupled differential equations is solved to estimate {sup 239}Pu production rate. Produced {sup 239}Pu is compared with two typical fission reactors to find performance of plutonium breeding ratio in the case of the fusion reactor. We found that 0.92% of initial U is converted into fissile Pu by our suggested fusion reactor with thermal power of 3000 MW. For comparison, {sup 239}Pu yield of suggested large scale PWR is about 0.65% and for LMFBR is close to 1.7%. The results show that the fusion reactor has an acceptable efficiency for Pu production compared with a large scale PWR fission reactor type.

  20. Daily intakes of naturally occurring radioisotopes in typical Korean foods

    International Nuclear Information System (INIS)

    Choi, Min-Seok; Lin Xiujing; Lee, Sun Ah; Kim, Wan; Kang, Hee-Dong; Doh, Sih-Hong; Kim, Do-Sung; Lee, Dong-Myung

    2008-01-01

    The concentrations of naturally occurring radioisotopes ( 232 Th, 228 Th, 230 Th, 228 Ra, 226 Ra, and 40 K) in typical Korean foods were evaluated. The daily intakes of these radioisotopes were calculated by comparing concentrations in typical Korean foods and the daily consumption rates of these foods. Daily intakes were as follows: 232 Th, 0.00-0.23; 228 Th, 0.00-2.04; 230 Th, 0.00-0.26; 228 Ra, 0.02-2.73; 226 Ra, 0.01-4.37 mBq/day; and 40 K, 0.01-5.71 Bq/day. The total daily intake of the naturally occurring radioisotopes measured in this study from food was 39.46 Bq/day. The total annual internal dose resulting from ingestion of radioisotopes in food was 109.83 μSv/y, and the radioisotope with the highest daily intake was 40 K. These values were same level compiled in other countries

  1. Emotion, gender, and gender typical identity in autobiographical memory.

    Science.gov (United States)

    Grysman, Azriel; Merrill, Natalie; Fivush, Robyn

    2017-03-01

    Gender differences in the emotional intensity and content of autobiographical memory (AM) are inconsistent across studies, and may be influenced as much by gender identity as by categorical gender. To explore this question, data were collected from 196 participants (age 18-40), split evenly between men and women. Participants narrated four memories, a neutral event, high point event, low point event, and self-defining memory, completed ratings of emotional intensity for each event, and completed four measures of gender typical identity. For self-reported emotional intensity, gender differences in AM were mediated by identification with stereotypical feminine gender norms. For narrative use of affect terms, both gender and gender typical identity predicted affective expression. The results confirm contextual models of gender identity (e.g., Diamond, 2012 . The desire disorder in research on sexual orientation in women: Contributions of dynamical systems theory. Archives of Sexual Behavior, 41, 73-83) and underscore the dynamic interplay between gender and gender identity in the emotional expression of autobiographical memories.

  2. Creating Gaze Annotations in Head Mounted Displays

    DEFF Research Database (Denmark)

    Mardanbeigi, Diako; Qvarfordt, Pernilla

    2015-01-01

    To facilitate distributed communication in mobile settings, we developed GazeNote for creating and sharing gaze annotations in head mounted displays (HMDs). With gaze annotations it possible to point out objects of interest within an image and add a verbal description. To create an annota- tion...

  3. Creating Safe Spaces for Music Learning

    Science.gov (United States)

    Hendricks, Karin S.; Smith, Tawnya D.; Stanuch, Jennifer

    2014-01-01

    This article offers a practical model for fostering emotionally safe learning environments that instill in music students a positive sense of self-belief, freedom, and purpose. The authors examine the implications for music educators of creating effective learning environments and present recommendations for creating a safe space for learning,…

  4. Examples of in-service inspections and typical maintenance schedule for low-power research reactors

    International Nuclear Information System (INIS)

    Boeck, H.

    1997-01-01

    In-service inspection methods for low-power research reactors are described which have been developed during the past 37 years of the operation of the TRIGA reactor Vienna. Special tools have been developed during this period and their application for maintenance and in-serve inspection is discussed. Two practical in-service inspections at a TRIGA reactor and at a MTR reactor are presented. Further a typical maintenance plan for a TRIGA reactor is listed in the annex. (author)

  5. DEVELOPMENT OF METHODOLOGY FOR TRAFFIC ACCIDENT FORECASTING AT VARIOUS TYPICAL URBAN AREAS

    OpenAIRE

    D. V. Kapsky

    2012-01-01

    The paper provides investigation results pertaining to development of methodology for forecasting traffic accidents using a “conflict zone” method that considers potential danger for two typical urban areas, namely: signaled crossings and bumps that are made in the areas of zebra crossings and it also considers various types and kinds of conflicts. The investigations have made it possible to obtain various indices of threshold sensitivity in respect of  potential risks  and in relation to tra...

  6. Change in convergence and accommodation after two weeks of eye exercises in typical young adults

    OpenAIRE

    Horwood, Anna M.; Toor, Sonia S.; Riddell, Patricia M.

    2014-01-01

    Abstract: Introduction\\ud Although eye exercises appear to help heterophoria, convergence insufficiency and intermittent strabismus, true treatment effects can be confounded by placebo, practice and encouragement factors. This study assessed objective changes in vergence and accommodation responses in typical naïve young adults after two weeks of exercises compared to control conditions to assess the extent of treatment effects occur above other factors.\\ud Methods\\ud 156 asymptomatic young a...

  7. Probabilistic Harmonic Analysis on Distributed Photovoltaic Integration Considering Typical Weather Scenarios

    Science.gov (United States)

    Bin, Che; Ruoying, Yu; Dongsheng, Dang; Xiangyan, Wang

    2017-05-01

    Distributed Generation (DG) integrating to the network would cause the harmonic pollution which would cause damages on electrical devices and affect the normal operation of power system. On the other hand, due to the randomness of the wind and solar irradiation, the output of DG is random, too, which leads to an uncertainty of the harmonic generated by the DG. Thus, probabilistic methods are needed to analyse the impacts of the DG integration. In this work we studied the harmonic voltage probabilistic distribution and the harmonic distortion in distributed network after the distributed photovoltaic (DPV) system integrating in different weather conditions, mainly the sunny day, cloudy day, rainy day and the snowy day. The probabilistic distribution function of the DPV output power in different typical weather conditions could be acquired via the parameter identification method of maximum likelihood estimation. The Monte-Carlo simulation method was adopted to calculate the probabilistic distribution of harmonic voltage content at different frequency orders as well as the harmonic distortion (THD) in typical weather conditions. The case study was based on the IEEE33 system and the results of harmonic voltage content probabilistic distribution as well as THD in typical weather conditions were compared.

  8. Contribution of milk production to global greenhouse gas emissions. An estimation based on typical farms.

    Science.gov (United States)

    Hagemann, Martin; Ndambi, Asaah; Hemme, Torsten; Latacz-Lohmann, Uwe

    2012-02-01

    Studies on the contribution of milk production to global greenhouse gas (GHG) emissions are rare (FAO 2010) and often based on crude data which do not appropriately reflect the heterogeneity of farming systems. This article estimates GHG emissions from milk production in different dairy regions of the world based on a harmonised farm data and assesses the contribution of milk production to global GHG emissions. The methodology comprises three elements: (1) the International Farm Comparison Network (IFCN) concept of typical farms and the related globally standardised dairy model farms representing 45 dairy regions in 38 countries; (2) a partial life cycle assessment model for estimating GHG emissions of the typical dairy farms; and (3) standard regression analysis to estimate GHG emissions from milk production in countries for which no typical farms are available in the IFCN database. Across the 117 typical farms in the 38 countries analysed, the average emission rate is 1.50 kg CO(2) equivalents (CO(2)-eq.)/kg milk. The contribution of milk production to the global anthropogenic emissions is estimated at 1.3 Gt CO(2)-eq./year, accounting for 2.65% of total global anthropogenic emissions (49 Gt; IPCC, Synthesis Report for Policy Maker, Valencia, Spain, 2007). We emphasise that our estimates of the contribution of milk production to global GHG emissions are subject to uncertainty. Part of the uncertainty stems from the choice of the appropriate methods for estimating emissions at the level of the individual animal.

  9. Economy of typical food: technical restrictions and organizative challenges

    Directory of Open Access Journals (Sweden)

    Elena Viganò

    2009-10-01

    Full Text Available The economic analysis of typical agri-food products requires to be focused on the following issues: i the specific features of the offering system; ii the technical restrictions established by the EU regulations on Protected designation of origin (Pdo and Pgi and, iii the strategies aimed at product differentiation and for value creation for the consumer. Considering this latest aspect, it is important to notice that the specificity of the agricultural raw materials, the use of traditional production techniques of production coming from the tradition of the place and certification represent only a prerequisite for the differentiation of the product on the market against standard products. The problem is that the specificity of local product comes from attributes (tangible and intangible of quality which are not directly accessible, nor verifiable, by the consumer when he/she makes purchasing choices. This situation persists despite the greater propensity of modern consumer to make investments in information and his/her greater attention and larger background towards the acknowledgement of different offers based on quality. This paper tends to develop an analysis on a theoretical and operative basis upon open strategies that can be implemented at the enterprise level, and that of agro-food chain and of territorial system in order to promote the quality of products to consumers. In particular, the work addresses the problems connected to the establishment of competitive advantages for Protected Designation of Origin (Pdo and Protected Geographical Indication (Pgi, highlighting that in order to achieve those advantages, firms offering typical products need to differentiate their offering on both material and immaterial ground acting on intrinsic and extrinsic attributes of quality of products, on specific features (natural, historical, cultural, etc. of territorial, on the efficiency of the offering organizational structure, and finally on the

  10. Economy of typical food: technical restrictions and organizative challenges

    Directory of Open Access Journals (Sweden)

    Elena Viganò

    2011-02-01

    Full Text Available The economic analysis of typical agri-food products requires to be focused on the following issues: i the specific features of the offering system; ii the technical restrictions established by the EU regulations on Protected designation of origin (Pdo and Pgi and, iii the strategies aimed at product differentiation and for value creation for the consumer. Considering this latest aspect, it is important to notice that the specificity of the agricultural raw materials, the use of traditional production techniques of production coming from the tradition of the place and certification represent only a prerequisite for the differentiation of the product on the market against standard products. The problem is that the specificity of local product comes from attributes (tangible and intangible of quality which are not directly accessible, nor verifiable, by the consumer when he/she makes purchasing choices. This situation persists despite the greater propensity of modern consumer to make investments in information and his/her greater attention and larger background towards the acknowledgement of different offers based on quality. This paper tends to develop an analysis on a theoretical and operative basis upon open strategies that can be implemented at the enterprise level, and that of agro-food chain and of territorial system in order to promote the quality of products to consumers. In particular, the work addresses the problems connected to the establishment of competitive advantages for Protected Designation of Origin (Pdo and Protected Geographical Indication (Pgi, highlighting that in order to achieve those advantages, firms offering typical products need to differentiate their offering on both material and immaterial ground acting on intrinsic and extrinsic attributes of quality of products, on specific features (natural, historical, cultural, etc. of territorial, on the efficiency of the offering organizational structure, and finally on the

  11. Peculiarities of Creating Foreign Students’ Lexical Competence

    Directory of Open Access Journals (Sweden)

    Aigul Eskermesovna Sadenova

    2016-11-01

    Full Text Available Teaching of vocabulary includes several aspects of teaching content: linguistic, methodological and psychological. Teaching of vocabulary is a process which is inextricably entwined with understanding relations between new words and phonetic and grammar aspects of the language. On the one hand, simultaneous learning of two languages complicates the tasks set to the students, but, on the other hand, it simplifies the process. The complexity is in the scope of vocabulary to be remembered, as well as in the differences between grammar structures used in Russian and Kazakh. The simplification is in the fact that students are fully aware that lexical competence is formed gradually, and that every language has its lexical base required at the initial stage, and that such base is to be developed for mastering a specific language. Before identifying the methods of vocabulary semantization in the course of teaching a language to foreign students, students shall be offered active vocabulary, used to express their ideas orally and in written form, and passive vocabulary, used to perceive oral and written information. It is not possible to teach semantics only. It is necessary to create paradigmatic, syntactic and associative relations. The formation of lexical skills is connected with the solidity of vocabulary retention. In order to ensure reinforcement of the vocabulary learnt, the students shall be offered exercises contributing to the development of their skills of using vocabulary in listening, speaking, reading and writing. All above mentioned types of vocabulary semantization constitute a unified whole. Different ways of semantization are set forth for methodological purposes, to facilitate the achievement of the desired result. Translation and non-translation techniques for vocabulary presentation, as well as some tips and exercises, are given. The use of basic vocabulary at elementary and advanced levels is suggested. Certain methods for the

  12. Creating Complex Repository Collections, Such as Journals, with Manakin

    Science.gov (United States)

    Koenig, Jack; Mikeal, Adam

    2010-01-01

    Purpose: The purpose of this paper is to report on a devised method of collection organisation within a DSpace repository using a Manakin theme and descriptive metadata. Design/methodology/approach: Using a Manakin theme, a user interface for a repository collection containing the contents of a serial was created to divide the collection into…

  13. Creating Spaces for Reconstructing Knowledge in Feminist Pedagogy.

    Science.gov (United States)

    Thompson, Audrey; Gitlin, Andrew

    1995-01-01

    Presents a conceptual outline for a feminist pedagogy that attempts to develop reconstructed knowledge. The paper describes how standpoint theory and conversation as method can further the aim of reconstructed knowledge, arguing that teachers and students with pedagogical relations should seek opportunities to create spaces within which to…

  14. Acoustical conditions of typical classrooms in Hong Kong

    Science.gov (United States)

    Li, Kai Ming; Lam, Coriolanus C. L.

    2005-04-01

    This paper presents measurement results of the acoustical environments of local schools in Hong Kong. In the measurements, several acoustical aspects that affect verbal communication in classrooms have been studied. These conditions include outdoor and indoor ambient noise levels, signal-to-noise ratios, reverberation time and the speech transmission index. Typical classrooms in many different schools and other higher-education institutions have been selected in the present study. Experimental results are compared with such national standards as USA (ANSI S 12.60 V 2002), Australian/New Zealand (AS/NZS 2107:2000), China (GB/T 15508 V 1995) and other national and industrial standards. This study will form the basis of devising acceptable standards for use in Hong Kong. [Work supported by the Research Grants Council of the SAR Government, the Research Committee of the Hong Kong Polytechnic University and Architectural Services Department of the Hong Kong SAR Government.

  15. Failure mode and effects analysis on typical reactor trip system

    International Nuclear Information System (INIS)

    Eisawy, E.A.

    2010-01-01

    An updated failure mode and effects analysis, FMEA , has been performed on a typical reactor trip system. This upgrade helps to avoid system damage and ,as a result, extends the system service life. It also provides for simplified maintenance and surveillance testing. The operating conditions under which the system is to carry out its function and the operational profile expected for the system have been determined. The results of the FMEA have been given in terms of operating states of the subsystem.The results are given in form of table which is set up such that for a given failure one can read across it and determine which items remain operating in the system. From this data one can identify the number of components operating in the system for monitors pressure exceeds the setpoint pressure.

  16. Typical and atypical radiological manifestations of renal oncocytoma

    International Nuclear Information System (INIS)

    Bernaldez, P.; Iriborreu, M. A.; Rodriguez, M. L.; Martinez-Moya, M.; Rodriguez, A.; Navarro, S.

    2001-01-01

    Asses the Radiologic findings [ conventional X-ray, intravenous urography (IU), ultrasonography and computerized tomography (CT) ] of the renal oncocytomas and determine if there are characteristics that allow us to differentiate them from renal cell carcinoma (RCC). We performed a retrospective study of eight patients diagnosed of renal oncocytoma, analyzing the characteristics found in the plain radiography and IVU, ultrasonography and CT without and with i. v. contrast. The masses were well defined in seven cases and poorly defined in one, and were homogeneous on four occasions and heterogeneous on two. The remaining two were homogeneous, except for the presence of a central scar. Two lesions showed and aggressive biological behavior, coinciding with signs suggestive of malignancy from the radiological point of view. The fibrous scar is a typical but infrequent findings in renal oncocytoma that we can only detect by CT. It is not possible to differentiate it from aggressive lesions with imaging techniques, although orientative findings exist. (Author) 17 refs

  17. Air Leakage Rates in Typical Air Barrier Assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Hun, Diana E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Atchley, Jerald Allen [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Childs, Phillip W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-11-01

    Estimates for 2010 indicate that infiltration in residential buildings was responsible for 2.85 quads of energy (DOE 2014), which is about 3% of the total energy consumed in the US. One of the mechanisms being implemented to reduce this energy penalty is the use of air barriers as part of the building envelope. These technologies decrease airflow through major leakage sites such as oriented strand board (OSB) joints, and gaps around penetrations (e.g., windows, doors, pipes, electrical outlets) as indicated by Hun et al. (2014). However, most air barrier materials do not properly address leakage spots such as wall-to-roof joints and wall-to-foundation joints because these are difficult to seal, and because air barrier manufacturers usually do not provide adequate instructions for these locations. The present study focuses on characterizing typical air leakage sites in wall assemblies with air barrier materials.

  18. Typical equilibrium state of an embedded quantum system.

    Science.gov (United States)

    Ithier, Grégoire; Ascroft, Saeed; Benaych-Georges, Florent

    2017-12-01

    We consider an arbitrary quantum system coupled nonperturbatively to a large arbitrary and fully quantum environment. In the work by Ithier and Benaych-Georges [Phys. Rev. A 96, 012108 (2017)2469-992610.1103/PhysRevA.96.012108] the typicality of the dynamics of such an embedded quantum system was established for several classes of random interactions. In other words, the time evolution of its quantum state does not depend on the microscopic details of the interaction. Focusing on the long-time regime, we use this property to calculate analytically a partition function characterizing the stationary state and involving the overlaps between eigenvectors of a bare and a dressed Hamiltonian. This partition function provides a thermodynamical ensemble which includes the microcanonical and canonical ensembles as particular cases. We check our predictions with numerical simulations.

  19. [Injury patterns and typical stress situations in paragliding].

    Science.gov (United States)

    Bohnsack, M; Schröter, E

    2005-05-01

    Paragliding is known as a high risk sport with a substantial rate of severe and fatal injuries. Analysis of typical injury mechanisms and statistics showed that the total rate of paragliding injuries has decreased in recent years for an increasing number of pilots. In 2003, the rate of severe and fatal injuries in paragliding was less than that of other air sports and motorcycling. Through the introduction of a spine protector system in Germany and Austria, the number of vertebral fractures decreased significantly between 2000 and 2003. Most other injuries, especially of the lower extremities, could be avoided by adequate and farsighted flight behavior. Qualified instruction with regular training, standardized development of safety equipment and consequent analysis of paragliding injuries will help to improve the safety status in paragliding.

  20. Anthropic reasoning and typicality in multiverse cosmology and string theory

    International Nuclear Information System (INIS)

    Weinstein, Steven

    2006-01-01

    Anthropic arguments in multiverse cosmology and string theory rely on the weak anthropic principle (WAP). We show that the principle is fundamentally ambiguous. It can be formulated in one of two ways, which we refer to as WAP 1 and WAP 2 . We show that WAP 2 , the version most commonly used in anthropic reasoning, makes no physical predictions unless supplemented by a further assumption of 'typicality', and we argue that this assumption is both misguided and unjustified. WAP 1 , however, requires no such supplementation; it directly implies that any theory that assigns a non-zero probability to our universe predicts that we will observe our universe with probability one. We argue, therefore, that WAP 1 is preferable, and note that it has the benefit of avoiding the inductive overreach characteristic of much anthropic reasoning

  1. Anthropic reasoning and typicality in multiverse cosmology and string theory

    Energy Technology Data Exchange (ETDEWEB)

    Weinstein, Steven [Perimeter Institute for Theoretical Physics, 31 Caroline St, Waterloo, ON N2L 2Y5 (Canada); Department of Philosophy, University of Waterloo, Waterloo, ON N2L 3G1 (Canada); Department of Physics, University of Waterloo, Waterloo, ON N2L 3G1 (Canada)

    2006-06-21

    Anthropic arguments in multiverse cosmology and string theory rely on the weak anthropic principle (WAP). We show that the principle is fundamentally ambiguous. It can be formulated in one of two ways, which we refer to as WAP{sub 1} and WAP{sub 2}. We show that WAP{sub 2}, the version most commonly used in anthropic reasoning, makes no physical predictions unless supplemented by a further assumption of 'typicality', and we argue that this assumption is both misguided and unjustified. WAP{sub 1}, however, requires no such supplementation; it directly implies that any theory that assigns a non-zero probability to our universe predicts that we will observe our universe with probability one. We argue, therefore, that WAP{sub 1} is preferable, and note that it has the benefit of avoiding the inductive overreach characteristic of much anthropic reasoning.

  2. Numerical Simulations for a Typical Train Fire in China

    Directory of Open Access Journals (Sweden)

    W. K. Chow

    2011-01-01

    Full Text Available Railway is the key transport means in China including the Mainland, Taiwan, and Hong Kong. Consequent to so many big arson and accidental fires in the public transport systems including trains and buses, fire safety in passenger trains is a concern. Numerical simulations with Computational Fluid Dynamics on identified fire scenarios with typical train compartments in China will be reported in this paper. The heat release rate of the first ignited item was taken as the input parameter. The mass lost rate of fuel vapor of other combustibles was estimated to predict the resultant heat release rates by the combustion models in the software. Results on air flow, velocity vectors, temperature distribution, smoke layer height, and smoke spread patterns inside the train compartment were analyzed. The results are useful for working out appropriate fire safety measures for train vehicles and determining the design fire for subway stations and railway tunnels.

  3. Wildfire Risk Assessment in a Typical Mediterranean Wildland-Urban Interface of Greece

    Science.gov (United States)

    Mitsopoulos, Ioannis; Mallinis, Giorgos; Arianoutsou, Margarita

    2015-04-01

    The purpose of this study was to assess spatial wildfire risk in a typical Mediterranean wildland-urban interface (WUI) in Greece and the potential effect of three different burning condition scenarios on the following four major wildfire risk components: burn probability, conditional flame length, fire size, and source-sink ratio. We applied the Minimum Travel Time fire simulation algorithm using the FlamMap and ArcFuels tools to characterize the potential response of the wildfire risk to a range of different burning scenarios. We created site-specific fuel models of the study area by measuring the field fuel parameters in representative natural fuel complexes, and we determined the spatial extent of the different fuel types and residential structures in the study area using photointerpretation procedures of large scale natural color orthophotographs. The results included simulated spatially explicit fire risk components along with wildfire risk exposure analysis and the expected net value change. Statistical significance differences in simulation outputs between the scenarios were obtained using Tukey's significance test. The results of this study provide valuable information for decision support systems for short-term predictions of wildfire risk potential and inform wildland fire management of typical WUI areas in Greece.

  4. Parameterized Finite Element Modeling and Buckling Analysis of Six Typical Composite Grid Cylindrical Shells

    Science.gov (United States)

    Lai, Changliang; Wang, Junbiao; Liu, Chuang

    2014-10-01

    Six typical composite grid cylindrical shells are constructed by superimposing three basic types of ribs. Then buckling behavior and structural efficiency of these shells are analyzed under axial compression, pure bending, torsion and transverse bending by finite element (FE) models. The FE models are created by a parametrical FE modeling approach that defines FE models with original natural twisted geometry and orients cross-sections of beam elements exactly. And the approach is parameterized and coded by Patran Command Language (PCL). The demonstrations of FE modeling indicate the program enables efficient generation of FE models and facilitates parametric studies and design of grid shells. Using the program, the effects of helical angles on the buckling behavior of six typical grid cylindrical shells are determined. The results of these studies indicate that the triangle grid and rotated triangle grid cylindrical shell are more efficient than others under axial compression and pure bending, whereas under torsion and transverse bending, the hexagon grid cylindrical shell is most efficient. Additionally, buckling mode shapes are compared and provide an understanding of composite grid cylindrical shells that is useful in preliminary design of such structures.

  5. Wildfire risk assessment in a typical Mediterranean wildland-urban interface of Greece.

    Science.gov (United States)

    Mitsopoulos, Ioannis; Mallinis, Giorgos; Arianoutsou, Margarita

    2015-04-01

    The purpose of this study was to assess spatial wildfire risk in a typical Mediterranean wildland-urban interface (WUI) in Greece and the potential effect of three different burning condition scenarios on the following four major wildfire risk components: burn probability, conditional flame length, fire size, and source-sink ratio. We applied the Minimum Travel Time fire simulation algorithm using the FlamMap and ArcFuels tools to characterize the potential response of the wildfire risk to a range of different burning scenarios. We created site-specific fuel models of the study area by measuring the field fuel parameters in representative natural fuel complexes, and we determined the spatial extent of the different fuel types and residential structures in the study area using photointerpretation procedures of large scale natural color orthophotographs. The results included simulated spatially explicit fire risk components along with wildfire risk exposure analysis and the expected net value change. Statistical significance differences in simulation outputs between the scenarios were obtained using Tukey's significance test. The results of this study provide valuable information for decision support systems for short-term predictions of wildfire risk potential and inform wildland fire management of typical WUI areas in Greece.

  6. Analysis of the influencing factors of PAEs volatilization from typical plastic products.

    Science.gov (United States)

    Chen, Weidong; Chi, Chenchen; Zhou, Chen; Xia, Meng; Ronda, Cees; Shen, Xueyou

    2018-04-01

    The primary emphasis of this research was to investigate the foundations of phthalate (PAEs) pollutant source researches and then firstly confirmed the concept of the coefficient of volatile strength, namely phthalate total content in per unit mass and unit surface area of pollutant sources. Through surveying and evaluating the coefficient of volatile strength of PAEs from typical plastic products, this research carried out reasonable classification of PAEs pollutant sources into three categories and then investigated the relationship amongst the coefficient of volatile strength as well as other environmental factors and the concentration level of total PAEs in indoor air measured in environment chambers. Research obtained phthalate concentration results under different temperature, humidity, the coefficient of volatile strength and the closed time through the chamber experiment. In addition, this study further explored the correlation and ratio of influencing factors that affect the concentration level of total PAEs in environment chambers, including environmental factors, the coefficient of volatile strengths of PAEs and contents of total PAEs in plastic products. The research created an improved database system of phthalate the coefficient of volatile strengths of each type of plastic goods, and tentatively revealed that the volatile patterns of PAEs from different typical plastic goods, finally confirmed that the coefficient of volatile strengths of PAEs is a major factor that affects the indoor air total PAEs concentration, which laid a solid foundation for further establishing the volatile equation of PAEs from plastic products. Copyright © 2017. Published by Elsevier B.V.

  7. Creep strain accumulation in a typical LMFBR piperun

    International Nuclear Information System (INIS)

    Johnstone, T.L.

    1975-01-01

    The analysis described allows the strain concentrations in typical LMFBR two anchor point uniplanar piperuns to be calculated. Account is taken of the effect of pipe elbows in attracting creep strain to themselves as well as possible movements of the thrust line due to strain redistribution. The influence of the initial load conditions is also examined. The stress relaxation analysis is facilitated by making the assumption that a cross-sectional stress distribution determined by the asymptotic fully developed state of creep exists at all times. Use is then made of Hoff(s) analogy between materials with a creep law of the Norton type and those with a corresponding non-linear elastic stress strain law, to determine complementary strain energy rates for straight pipes and bends. Ovalisation of the latter produces an increased strain energy rate which can be simply calculated by comparison with an equal length of straight pipe through employing a creep flexibility factor due to Spence. Deflection rates at any location in the pipework can then be evaluated in terms of the thermal restraint forces at that location by an application of Castigliano's principle. In particular for an anchor point the deflection rates are identically zero and this leads to the generation of 3 simultaneous differential equations determining the relaxation of the anchor reactions. Indicative results are presented for the continuous relaxation at 570 deg C of the thermally induced stress in a planar approximation to a typical LMFBR pipe run chosen to have peak elbow stresses close to the code maximum. The results indicate a ratio, after 10 5 hours, of 3 for creep strain concentration relative to initial peak strain (calculated on the assumption of fully elastic behavior) in the most severely affected elbow, when either austenitic 316 or 321 creep properties are employed

  8. Memory for sequences of events impaired in typical aging

    Science.gov (United States)

    Allen, Timothy A.; Morris, Andrea M.; Stark, Shauna M.; Fortin, Norbert J.

    2015-01-01

    Typical aging is associated with diminished episodic memory performance. To improve our understanding of the fundamental mechanisms underlying this age-related memory deficit, we previously developed an integrated, cross-species approach to link converging evidence from human and animal research. This novel approach focuses on the ability to remember sequences of events, an important feature of episodic memory. Unlike existing paradigms, this task is nonspatial, nonverbal, and can be used to isolate different cognitive processes that may be differentially affected in aging. Here, we used this task to make a comprehensive comparison of sequence memory performance between younger (18–22 yr) and older adults (62–86 yr). Specifically, participants viewed repeated sequences of six colored, fractal images and indicated whether each item was presented “in sequence” or “out of sequence.” Several out of sequence probe trials were used to provide a detailed assessment of sequence memory, including: (i) repeating an item from earlier in the sequence (“Repeats”; e.g., ABADEF), (ii) skipping ahead in the sequence (“Skips”; e.g., ABDDEF), and (iii) inserting an item from a different sequence into the same ordinal position (“Ordinal Transfers”; e.g., AB3DEF). We found that older adults performed as well as younger controls when tested on well-known and predictable sequences, but were severely impaired when tested using novel sequences. Importantly, overall sequence memory performance in older adults steadily declined with age, a decline not detected with other measures (RAVLT or BPS-O). We further characterized this deficit by showing that performance of older adults was severely impaired on specific probe trials that required detailed knowledge of the sequence (Skips and Ordinal Transfers), and was associated with a shift in their underlying mnemonic representation of the sequences. Collectively, these findings provide unambiguous evidence that the

  9. Far-infrared irradiation drying behavior of typical biomass briquettes

    International Nuclear Information System (INIS)

    Chen, N.N.; Chen, M.Q.; Fu, B.A.; Song, J.J.

    2017-01-01

    Infrared radiation drying behaviors of four typical biomass briquettes (populus tomentosa leaves, cotton stalk, spent coffee grounds and eucalyptus bark) were investigated based on a lab-scale setup. The effect of radiation source temperatures (100–200 °C) on the far-infrared drying kinetics and heat transfer of the samples was addressed. As the temperature went up from 100 °C to 200 °C, the time required for the four biomass briquettes drying decreased by about 59–66%, and the average values of temperature for the four biomass briquettes increased by about 33–39 °C, while the average radiation heat transfer fluxes increased by about 3.3 times (3.7 times only for the leaves). The specific energy consumptions were 0.622–0.849 kW h kg"−"1. The Modified Midilli model had the better representing for the moisture ratio change of the briquettes. The values of the activation energy for the briquettes in the first falling rate stage were between 20.35 and 24.83 kJ mol"−"1, while those in the second falling rate stage were between 17.89 and 21.93 kJ mol"−"1. The activation energy for the eucalyptus bark briquette in two falling rate stages was the least one, and that for the cotton stalk briquette was less than that for the rest two briquettes. - Highlights: • Far infrared drying behaviors of four typical biomass briquettes were addressed. • The effect of radiation source temperatures on IR drying kinetics was stated. • Radiation heat transfer flux between the sample and heater was evaluated. • Midilli model had the better representing for the drying process of the samples.

  10. DISRUPTION OF CONDITIONED REWARD ASSOCIATION BY TYPICAL AND ATYPICAL ANTIPSYCHOTICS

    Science.gov (United States)

    Danna, C.L.; Elmer, G.I.

    2013-01-01

    Antipsychotic drugs are broadly classified into typical and atypical compounds; they vary in their pharmacological profile however a common component is their antagonist effects at the D2 dopamine receptors (DRD2). Unfortunately, diminished DRD2 activation is generally thought to be associated with the severity of neuroleptic-induced anhedonia. The purpose of this study was to determine the effect of the atypical antipsychotic olanzapine and typical antipsychotic haloperidol in a paradigm that reflects the learned transfer of incentive motivational properties to previously neutral stimuli, namely autoshaping. In order to provide a dosing comparison to a therapeutically relevant endpoint, both drugs were tested against amphetamine-induced disruption of prepulse inhibition as well. In the autoshaping task, rats were exposed to repeated pairings of stimuli that were differentially predictive of reward delivery. Conditioned approach to the reward predictive cue (sign-tracking) and to the reward (goal-tracking) increased during repeated pairings in the vehicle treated rats. Haloperidol and olanzapine completely abolished this behavior at relatively low doses (100 μg/kg). This same dose was the threshold dose for each drug to antagonize the sensorimotor gating deficits produced by amphetamine. At lower doses (3–30 μg/kg) both drugs produced a dose-dependent decrease in conditioned approach to the reward predictive cue. There was no difference between drugs at this dose range which indicates that olanzapine disrupts autoshaping at a significantly lower proposed DRD2 receptor occupancy. Interestingly, neither drug disrupted conditioned approach to the reward at the same dose range that disrupted conditioned approach to the reward predictive cue. Thus, haloperidol and olanzapine, at doses well below what is considered therapeutically relevant, disrupts the attribution of incentive motivational value to previously neutral cues. Drug effects on this dimension of reward

  11. A brief history of typical absence seizures - Petit mal revisited.

    Science.gov (United States)

    Brigo, Francesco; Trinka, Eugen; Lattanzi, Simona; Bragazzi, Nicola Luigi; Nardone, Raffaele; Martini, Mariano

    2018-03-01

    In this article, we have traced back the history of typical absence seizures, from their initial clinical description to the more recent nosological position. The first description of absence seizures was made by Poupart in 1705 and Tissot in 1770. In 1824, Calmeil introduced the term "absences", and in 1838, Esquirol for the first time used the term petit mal. Reynolds instead used the term "epilepsia mitior" (milder epilepsy) and provided a comprehensive description of absence seizures (1861). In 1854, Delasiauve ranked absences as the seizure type with lower severity and introduced the concept of idiopathic epilepsy. Otto Binswanger (1899) discussed the role of cortex in the pathophysiology of "abortive seizures", whereas William Gowers (1901) emphasized the importance of a detailed clinical history to identify nonmotor seizures or very mild motor phenomena which otherwise may go unnoticed or considered not epileptic. At the beginning of the 20th Century, the term pyknolepsy was introduced, but initially was not universally considered as a type of epilepsy; it was definitely recognized as an epileptic entity only in 1945, based on electroencephalogram (EEG) recordings. Hans Berger, the inventor of the EEG, made also the first EEG recording of an atypical absence (his results were published only in 1933), whereas the characteristic EEG pattern was reported by neurophysiologists of the Harvard Medical School in 1935. The discovery of EEG made it also possible to differentiate absence seizures from so called "psychomotor" seizures occurring in temporal lobe epilepsy. Penfield and Jasper (1938) considered absences as expression of "centrencephalic epilepsy". Typical absences seizures are now classified by the International League Against Epilepsy among generalized nonmotor (absence) seizures. Copyright © 2018 Elsevier Inc. All rights reserved.

  12. New genetic tools to identify and protect typical italian products

    Directory of Open Access Journals (Sweden)

    Sergio Lanteri

    2011-02-01

    Full Text Available During last decades the use of local varieties was strongly reduced due to introduction of modern cultivars characterized by higher yield, and breed for different traits of agronomic value. However, these cultivars not always have the quality aspects that was found in old traditional and typical crops also depending from the know-how of traditional cultivation. Nowadays the practise of intensive agriculture select only a small number of species and varieties with a consequent reduction of the diversity in agro-ecosystems and risk of loss of important alleles characterizing genetic materials adapted to specific environments. The creation of quality marks of the European Union proved to be a successful system to protect typical products through the Denomination of Origins (PDO- Protected Denomination of Origin and PGI- Protected Geographical Indication. However, the protection of quality needs efficient instruments to discriminate DOP or IGP varieties in the field and to trace them along the agro-food chain. DNA fingerprinting represents an excellent system to discriminate herbaceous and tree species as well as to quantify the amount of genetic variability present in germplasm collections. The paper describes several examples in which AFLPs, SSRs and minisatellite markers were successfully used to identify tomato, artichoke, grape, apple and walnut varieties proving to be effective in discriminating also closely related genetic material. DNA fingerprinting based on SSR is also a powerful tool to trace and authenticate row plant materials in agro-food chains. The paper describes examples of varieties traceability in the food chains durum wheat, olive, apple and tomato pursued through the identification of SSR allelic profiles obtained from DNA isolated from complex highly processed food, such as bread, olive oil, apple pureè and nectar and peeled tomato.

  13. New genetic tools to identify and protect typical italian products

    Directory of Open Access Journals (Sweden)

    Sergio Lanteri

    2009-10-01

    Full Text Available During last decades the use of local varieties was strongly reduced due to introduction of modern cultivars characterized by higher yield, and breed for different traits of agronomic value. However, these cultivars not always have the quality aspects that was found in old traditional and typical crops also depending from the know-how of traditional cultivation. Nowadays the practise of intensive agriculture select only a small number of species and varieties with a consequent reduction of the diversity in agro-ecosystems and risk of loss of important alleles characterizing genetic materials adapted to specific environments. The creation of quality marks of the European Union proved to be a successful system to protect typical products through the Denomination of Origins (PDO- Protected Denomination of Origin and PGI- Protected Geographical Indication. However, the protection of quality needs efficient instruments to discriminate DOP or IGP varieties in the field and to trace them along the agro-food chain. DNA fingerprinting represents an excellent system to discriminate herbaceous and tree species as well as to quantify the amount of genetic variability present in germplasm collections. The paper describes several examples in which AFLPs, SSRs and minisatellite markers were successfully used to identify tomato, artichoke, grape, apple and walnut varieties proving to be effective in discriminating also closely related genetic material. DNA fingerprinting based on SSR is also a powerful tool to trace and authenticate row plant materials in agro-food chains. The paper describes examples of varieties traceability in the food chains durum wheat, olive, apple and tomato pursued through the identification of SSR allelic profiles obtained from DNA isolated from complex highly processed food, such as bread, olive oil, apple pureè and nectar and peeled tomato.

  14. Generation of typical solar radiation data for different climates of China

    International Nuclear Information System (INIS)

    Zang, Haixiang; Xu, Qingshan; Bian, Haihong

    2012-01-01

    In this study, typical solar radiation data are generated from both measured data and synthetic generation for 35 stations in six different climatic zones of China. (1) By applying the measured weather data during at least 10 years from 1994 to 2009, typical meteorological years (TMYs) for 35 cities are generated using the Finkelstein–Schafer statistical method. The cumulative distribution function (CDF) of daily global solar radiation (DGSR) for each year is compared with the CDF of DGSR for the long-term years in six different climatic stations (Sanya, Shanghai, Zhengzhou, Harbin, Mohe and Lhasa). The daily global solar radiation as typical data obtained from the TMYs are presented in the Table. (2) Based on the recorded global radiation data from at least 10 years, a new daily global solar radiation model is developed with a sine and cosine wave (SCW) equation. The results of the proposed model and other empirical regression models are compared with measured data using different statistical indicators. It is found that solar radiation data, calculated by the new model, are superior to these from other empirical models at six typical climatic zones. In addition, the novel SCW model is tested and applied for 35 stations in China. -- Highlights: ► Both TMY method and synthetic generation are used to generate solar radiation data. ► The latest and accurate long term weather data in six different climates are applied. ► TMYs using new weighting factors of 8 weather indices for 35 regions are obtained. ► A new sine and cosine wave model is proposed and utilized for 35 major stations. ► Both TMY method and the proposed regression model perform well on monthly bases.

  15. Creating student awareness to improve cultural competence: creating the critical incident.

    Science.gov (United States)

    Morell, Venita W; Sharp, Penny C; Crandall, Sonia J

    2002-09-01

    Teaching medical students to recognize the need for cultural competence and accept their shortcomings in this area is a challenge. A simulated patient scenario was developed to address this challenge. The objective of the simulation is to enhance students' readiness to learn by moving them from 'unconscious incompetence' to 'conscious incompetence'. The patient scenario presents a Cherokee Indian woman with a complaint of abnormal menstrual bleeding who is resistant to gynaecologic care from male providers. A faculty member facilitates a small-group videotape review of student interviews. As students discuss their encounters, they realize they 'misdiagnose' and mishandle the interview. They are confronted by their inability to recognize cultural cues and the impact they may have on health outcomes and begin to question whether cultural beliefs are affecting the care of other patients. This simulation creates an eye-opening situation that must be handled carefully. This activity is an effective method to create awareness in students who feel they 'know all this stuff.'

  16. Design and Management Criteria for Fish, Amphibian, and Reptile Communities Within Created Agricultural Wetlands

    Science.gov (United States)

    Design and management criteria for created agricultural wetlands in the midwestern United States typically focus on maximizing the ability to process agricultural runoff. Ecological benefits for fish, amphibian, and reptiles are often secondary considerations. One example of this water quality focu...

  17. Creating mobile apps with Appcelerator Titanium

    CERN Document Server

    Brousseau, Christian

    2013-01-01

    Creating Mobile Apps with Appcelerator Titanium provides a hands-on approach and working examples on creating apps and games as well as embedding them onto a social networking website. Developers can then move on from there to develop their own applications based on the ones they have developed throughout the course of this book.""Creating Mobile Apps with Appcelerator Titanium"" is for developers who have experience with modern languages and development environments. Also, if you are familiar with the concepts of Object-oriented Programming (OOP), reusable components, AJAX closures, and so on

  18. Creating Web Sites The Missing Manual

    CERN Document Server

    MacDonald, Matthew

    2006-01-01

    Think you have to be a technical wizard to build a great web site? Think again. For anyone who wants to create an engaging web site--for either personal or business purposes--Creating Web Sites: The Missing Manual demystifies the process and provides tools, techniques, and expert guidance for developing a professional and reliable web presence. Like every Missing Manual, you can count on Creating Web Sites: The Missing Manual to be entertaining and insightful and complete with all the vital information, clear-headed advice, and detailed instructions you need to master the task at hand. Autho

  19. Creating Space Plasma from the Ground

    Science.gov (United States)

    2016-05-12

    AFRL-AFOSR-VA-TR-2016-0179 CREATING SPACE PLASMA FROM THE GROUND Herbert C Carlson UTAH STATE UNIVERSITY Final Report 05/12/2016 DISTRIBUTION A...DATE (DD-MM-YYYY) 05/14/2016 2. REPORT TYPE Final 3. DATES COVERED (From - To) 08/14/2012-05/14/2016 4. TITLE AND SUBTITLE Creating space plasma from...Report (2016) Creating Space Plasma from the Ground Grant FA9550-11-1-0236 AFOSR Program Manager Dr. Kent Miller PI: Herbert C. Carlson Center for

  20. Advancing Continence in Typically Developing Children: Adapting the Procedures of Foxx and Azrin for Primary Care.

    Science.gov (United States)

    Warzak, William J; Forcino, Stacy S; Sanberg, Sela Ann; Gross, Amy C

    2016-01-01

    To (1) identify and summarize procedures of Foxx and Azrin's classic toilet training protocol that continue to be used in training typically developing children and (2) adapt recent findings with the original Foxx and Azrin procedures to inform practical suggestions for the rapid toilet training of typically developing children in the primary care setting. Literature searches of PsychINFO and MEDLINE databases used the search terms "(toilet* OR potty* AND train*)." Selection criteria were only peer-reviewed experimental articles that evaluated intensive toilet training with typically developing children. Exclusion criteria were (1) nonpeer reviewed research, (2) studies addressing encopresis and/or enuresis, (3) studies excluding typically developing children, and (4) studies evaluating toilet training during infancy. In addition to the study of Foxx and Azrin, only 4 publications met the above criteria. Toilet training procedures from each article were reviewed to determine which toilet training methods were similar to components described by Foxx and Azrin. Common training elements include increasing the frequency of learning opportunities through fluid loading and having differential consequences for being dry versus being wet and for voiding in the toilet versus elsewhere. There is little research on intensive toilet training of typically developing children. Practice sits and positive reinforcement for voids in the toilet are commonplace, consistent with the Foxx and Azrin protocol, whereas positive practice as a corrective procedure for wetting accidents often is omitted. Fluid loading and differential consequences for being dry versus being wet and for voiding in the toilet also are suggested procedures, consistent with the Foxx and Azrin protocol.

  1. Estimating the uncertainty of damage costs of pollution: A simple transparent method and typical results

    International Nuclear Information System (INIS)

    Spadaro, Joseph V.; Rabl, Ari

    2008-01-01

    Whereas the uncertainty of environmental impacts and damage costs is usually estimated by means of a Monte Carlo calculation, this paper shows that most (and in many cases all) of the uncertainty calculation involves products and/or sums of products and can be accomplished with an analytic solution which is simple and transparent. We present our own assessment of the component uncertainties and calculate the total uncertainty for the impacts and damage costs of the classical air pollutants; results for a Monte Carlo calculation for the dispersion part are also shown. The distribution of the damage costs is approximately lognormal and can be characterized in terms of geometric mean μ g and geometric standard deviation σ g , implying that the confidence interval is multiplicative. We find that for the classical air pollutants σ g is approximately 3 and the 68% confidence interval is [μ g / σ g , μ g σ g ]. Because the lognormal distribution is highly skewed for large σ g , the median is significantly smaller than the mean. We also consider the case where several lognormally distributed damage costs are added, for example to obtain the total damage cost due to all the air pollutants emitted by a power plant, and we find that the relative error of the sum can be significantly smaller than the relative errors of the summands. Even though the distribution for such sums is not exactly lognormal, we present a simple lognormal approximation that is quite adequate for most applications

  2. Methods for nuclear material control used in the basic production of a typical radiochemical plant

    International Nuclear Information System (INIS)

    Kositsyn, V.F.; Mukhortov, N.F.; Korovin, Yu.I.; Rudenko, V.S.; Petrov, A.M.

    1999-01-01

    Techniques for destructive and non-destructive assay of the component and isotopic composition of nuclear materials are described, namely gravimetric, titrimetric, coulometric, mass spectrometry, as well as those based on registration of neutron and γ radiations. Their metrologic characteristics are described. The techniques described are suggested to be used for nuclear material (NM) control and accounting purposes at the model radiochemical plant for processing irradiated fuel subassemblies from power reactors. The measurement control program is also described. This program is intended for the measurement quality assurance in the framework of NM control and accountancy system [ru

  3. Crashworthiness uncertainty analysis of typical civil aircraft based on Box–Behnken method

    OpenAIRE

    Ren Yiru; Xiang Jinwu

    2014-01-01

    The crashworthiness is an important design factor of civil aircraft related with the safety of occupant during impact accident. It is a highly nonlinear transient dynamic problem and may be greatly influenced by the uncertainty factors. Crashworthiness uncertainty analysis is conducted to investigate the effects of initial conditions, structural dimensions and material properties. Simplified finite element model is built based on the geometrical model and basic physics phenomenon. Box–Behnken...

  4. Creating symmetry the artful mathematics of wallpaper patterns

    CERN Document Server

    Farris, Frank A

    2015-01-01

    This lavishly illustrated book provides a hands-on, step-by-step introduction to the intriguing mathematics of symmetry. Instead of breaking up patterns into blocks-a sort of potato-stamp method-Frank Farris offers a completely new waveform approach that enables you to create an endless variety of rosettes, friezes, and wallpaper patterns: dazzling art images where the beauty of nature meets the precision of mathematics. Featuring more than 100 stunning color illustrations and requiring only a modest background in math, Creating Symmetry begins by addressing the enigma of a simple curve, who

  5. Picture models for 2-scene comics creating system

    Directory of Open Access Journals (Sweden)

    Miki UENO

    2015-03-01

    Full Text Available Recently, computer understanding pictures and stories becomes one of the most important research topics in computer science. However, there are few researches about human like understanding by computers because pictures have not certain format and contain more lyric aspect than that of natural laguage. For picture understanding, a comic is the suitable target because it is consisted by clear and simple plot of stories and separated scenes.In this paper, we propose 2 different types of picture models for 2-scene comics creating system. We also show the method of the application of 2-scene comics creating system by means of proposed picture model.

  6. Effects of circumferential rigid wrist orthoses in rehabilitation of patients with radius fracture at typical site

    Directory of Open Access Journals (Sweden)

    Đurović Aleksandar

    2005-01-01

    Full Text Available Background. The use of orthoses is a questionable rehabilitation method for patients with the distal radius fracture at typical site. The aim of this study was to compare the effects of the rehabilitation on patients with radius fracture at the typical site, who wore circumferential static wrist orthoses, with those who did not wear them. Methods. Thirty patients were divided into 3 equal groups, 2 experimental groups, and 1 control group. The patients in the experimental groups were given the rehabilitation program of wearing serially manufactured (off-the-shelf, as well as custom-fit orthoses. Those in the control group did not wear wrist orthoses. Evaluation parameters were pain, edema, the range of the wrist motion, the quality of cylindrical, spherical, and pinch-spherical grasp, the strength of pinch and hand grasp, and patient's assessment of the effects of rehabilitation. Results. No significant difference in the effects of rehabilitation on the patients in experimental groups as opposed to control group was found. Patients in the first experimental group, and in control group were more satisfied with the effects of rehabilitation, as opposed to the patients in the second experimental group (p<0,05. Conclusion. The effects of circumferential static wrist orthoses in the rehabilitation of patients with distal radius fracture at the typical site were not clinically significant. There was no significant difference between the custom and off-the-shelf orthoses.

  7. A summary of the CMS Create event

    CERN Multimedia

    CERN. Geneva; GASTAL, Martin

    2016-01-01

    The maiden CMS Create event took place in November 2015 and was a huge success. The output from all the participants was fantastic. As organisers we learnt a lot and hope to build on our experience for the 2016 event!

  8. Towards Creating Sustainable Ecotourism Interventions: Practical ...

    African Journals Online (AJOL)

    2017-05-01

    May 1, 2017 ... Keywords: Tourism, Development, Livelihoods, Assets, Adaptive .... widely reported in the Ghanaian media that farmers in some ..... created an outlet for revenue which, when accrued, was invested prudently in social.

  9. Taking medicine at home - create a routine

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/patientinstructions/000613.htm Taking medicine at home - create a routine To use the ... teeth. Find Ways to Help You Remember Your Medicines You can: Set the alarm on your clock, ...

  10. More Sci- than Fi, Physicists Create Antimatter

    CERN Multimedia

    Overbye, Dennis

    2002-01-01

    Physicists working in Europe announced yesterday that they had passed through nature's looking glass and had created atoms made of antimatter, or antiatoms, opening up the possibility of experiments in a realm once reserved for science fiction writers (5 pages)

  11. Creating Healthy Environments For Youth Athletes

    Science.gov (United States)

    EPA has created a presentation and companion checklist to help coaches and athletic administrators better understand the environmental health risks associated with youth sports and the steps they can follow to protect young athletes.

  12. Creating Great Neighborhoods: Density in Your Community

    Science.gov (United States)

    This report highlights nine community-led efforts to create vibrant neighborhoods through density, discusses the connections between smart growth and density, and introduces design principles to ensure that density becomes a community asset.

  13. Creating an Economically Enabling and Competitive Business ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Creating an Economically Enabling and Competitive Business Environment in the ... the scope of operations of private sector enterprises in the West Bank and Gaza. ... IWRA/IDRC webinar on climate change and adaptive water management.

  14. ICT and Pragmatism: Creating sustainable Employment for ...

    African Journals Online (AJOL)

    PROF. OLIVER OSUAGWA

    effort to create self employment, this can galvanize unexpected revolution whose consequences will be very grave. The reading .... having a significant impact on the service industries. ..... secure your investment. Additional ..... Nigeria may fail.

  15. Longitudinal changes in cortical thickness in autism and typical development.

    Science.gov (United States)

    Zielinski, Brandon A; Prigge, Molly B D; Nielsen, Jared A; Froehlich, Alyson L; Abildskov, Tracy J; Anderson, Jeffrey S; Fletcher, P Thomas; Zygmunt, Kristen M; Travers, Brittany G; Lange, Nicholas; Alexander, Andrew L; Bigler, Erin D; Lainhart, Janet E

    2014-06-01

    The natural history of brain growth in autism spectrum disorders remains unclear. Cross-sectional studies have identified regional abnormalities in brain volume and cortical thickness in autism, although substantial discrepancies have been reported. Preliminary longitudinal studies using two time points and small samples have identified specific regional differences in cortical thickness in the disorder. To clarify age-related trajectories of cortical development, we examined longitudinal changes in cortical thickness within a large mixed cross-sectional and longitudinal sample of autistic subjects and age- and gender-matched typically developing controls. Three hundred and forty-five magnetic resonance imaging scans were examined from 97 males with autism (mean age = 16.8 years; range 3-36 years) and 60 males with typical development (mean age = 18 years; range 4-39 years), with an average interscan interval of 2.6 years. FreeSurfer image analysis software was used to parcellate the cortex into 34 regions of interest per hemisphere and to calculate mean cortical thickness for each region. Longitudinal linear mixed effects models were used to further characterize these findings and identify regions with between-group differences in longitudinal age-related trajectories. Using mean age at time of first scan as a reference (15 years), differences were observed in bilateral inferior frontal gyrus, pars opercularis and pars triangularis, right caudal middle frontal and left rostral middle frontal regions, and left frontal pole. However, group differences in cortical thickness varied by developmental stage, and were influenced by IQ. Differences in age-related trajectories emerged in bilateral parietal and occipital regions (postcentral gyrus, cuneus, lingual gyrus, pericalcarine cortex), left frontal regions (pars opercularis, rostral middle frontal and frontal pole), left supramarginal gyrus, and right transverse temporal gyrus, superior parietal lobule, and

  16. Creating Societal Benefits and Corporate Profits

    OpenAIRE

    Raisch, Sebastian; Probst, Gilbert; Gomez, Peter; Zimmermann, Alexander

    2014-01-01

    The odds of launching a new business that creates value for both the company and the public can be improved with good planning. An in-depth analysis of how four companies created for-profit initiatives that also have high societal value suggests that each followed a similar step-by-step process to achieve what the researchers call synergistic value creation. Those steps include establishing cross-business incubators and installing multi-perspective monitoring systems.

  17. ISO 55000: Creating an asset management system.

    Science.gov (United States)

    Bradley, Chris; Main, Kevin

    2015-02-01

    In the October 2014 issue of HEJ, Keith Hamer, group vice-president, Asset Management & Engineering at Sodexo, and marketing director at Asset Wisdom, Kevin Main, argued that the new ISO 55000 standards present facilities managers with an opportunity to create 'a joined-up, whole lifecycle approach' to managing and delivering value from assets. In this article, Kevin Main and Chris Bradley, who runs various asset management projects, examine the process of creating an asset management system.

  18. Creating opioid dependence in the emergency department.

    Science.gov (United States)

    Upadhye, Suneel

    2018-01-01

    Clinical question What is the risk of creating opioid dependence from an ED opioid prescription? Article chosen Barnett ML, Olenski AR, Jena AB. Opioid-prescribing patterns of emergency physicians and risk of long-term use. N Engl J Med 2017;376:663-73, doi:10.1056/NEJMsa1610524. This study examined the risk of creating long-term opioid dependence from a prescription written in an opioid-naive patient in the ED.

  19. Creating Math Videos: Comparing Platforms and Software

    Science.gov (United States)

    Abbasian, Reza O.; Sieben, John T.

    2016-01-01

    In this paper we present a short tutorial on creating mini-videos using two platforms--PCs and tablets such as iPads--and software packages that work with these devices. Specifically, we describe the step-by-step process of creating and editing videos using a Wacom Intuos pen-tablet plus Camtasia software on a PC platform and using the software…

  20. Creating safety by strengthening clinicians' capacity for reflexivity

    Science.gov (United States)

    2011-01-01

    This commentary explores the nature of creating safety in the here-and-now. Creating safety encompasses two dimensions: revisiting specific behaviours by focusing on substandard performance (reflection), and a more broad-ranging attention to everyday behaviours that are taken as given (reflexivity). The piece pays particular attention to this second dimension of creating safety. Two techniques that promote reflexivity are discussed: video-filming real-time, everyday clinical practice and inviting clinicians' feedback about their own footage, and reflecting on the knowledge and questions that patients and families have about their care, and about unexpected outcomes and clinical incidents. The piece concludes that feedback about everyday practice using these methods is critical to enhancing the safety of everyday activity. PMID:21450780

  1. Experimental Research on Boundary Shear Stress in Typical Meandering Channel

    Science.gov (United States)

    Chen, Kai-hua; Xia, Yun-feng; Zhang, Shi-zhao; Wen, Yun-cheng; Xu, Hua

    2018-06-01

    A novel instrument named Micro-Electro-Mechanical System (MEMS) flexible hot-film shear stress sensor was used to study the boundary shear stress distribution in the generalized natural meandering open channel, and the mean sidewall shear stress distribution along the meandering channel, and the lateral boundary shear stress distribution in the typical cross-section of the meandering channel was analysed. Based on the measurement of the boundary shear stress, a semi-empirical semi-theoretical computing approach of the boundary shear stress was derived including the effects of the secondary flow, sidewall roughness factor, eddy viscosity and the additional Reynolds stress, and more importantly, for the first time, it combined the effects of the cross-section central angle and the Reynolds number into the expressions. Afterwards, a comparison between the previous research and this study was developed. Following the result, we found that the semi-empirical semi-theoretical boundary shear stress distribution algorithm can predict the boundary shear stress distribution precisely. Finally, a single factor analysis was conducted on the relationship between the average sidewall shear stress on the convex and concave bank and the flow rate, water depth, slope ratio, or the cross-section central angle of the open channel bend. The functional relationship with each of the above factors was established, and then the distance from the location of the extreme sidewall shear stress to the bottom of the open channel was deduced based on the statistical theory.

  2. Musical Mnemonics Enhance Verbal Memory in Typically Developing Children

    Directory of Open Access Journals (Sweden)

    David Knott

    2018-05-01

    Full Text Available The purpose of this study was to compare the effects of musical mnemonics vs. spoken word in training verbal memory in children. A randomized control trial of typically-developing 9–11 year old children was conducted using the Rey Auditory Verbal Learning Test (RAVLT, a test measuring a participant's ability to recall a list of 15 words over multiple exposures. Members of the group who listened to words sung to them recalled an average of 20% more words after listening to and recalling an interference list than members of the control group who listened to the same words spoken. This difference persisted, though slightly smaller (17% when participants recalled words after a 15-min waiting period. Additionally, group participants who listened to words sung demonstrated a higher incidence of words recalled in correct serial order. Key findings were all statistically significant at the P < 0.05 level. Enhanced serial order recall points to the musical pitch/rhythm structure enhancing sequence memory as a potential mnemonic mechanism. No significant differences were found in serial position effects between groups. The findings suggest that musical mnemonic training may be more effective than rehearsal with spoken words in verbal memory learning tasks in 9–11 year olds.

  3. Physical characteristics and resistance parameters of typical urban cyclists.

    Science.gov (United States)

    Tengattini, Simone; Bigazzi, Alexander York

    2018-03-30

    This study investigates the rolling and drag resistance parameters and bicycle and cargo masses of typical urban cyclists. These factors are important for modelling of cyclist speed, power and energy expenditure, with applications including exercise performance, health and safety assessments and transportation network analysis. However, representative values for diverse urban travellers have not been established. Resistance parameters were measured utilizing a field coast-down test for 557 intercepted cyclists in Vancouver, Canada. Masses were also measured, along with other bicycle attributes such as tire pressure and size. The average (standard deviation) of coefficient of rolling resistance, effective frontal area, bicycle plus cargo mass, and bicycle-only mass were 0.0077 (0.0036), 0.559 (0.170) m 2 , 18.3 (4.1) kg, and 13.7 (3.3) kg, respectively. The range of measured values is wider and higher than suggested in existing literature, which focusses on sport cyclists. Significant correlations are identified between resistance parameters and rider and bicycle attributes, indicating higher resistance parameters for less sport-oriented cyclists. The findings of this study are important for appropriately characterising the full range of urban cyclists, including commuters and casual riders.

  4. Typical and atypical clinical presentation of uterine myomas

    Directory of Open Access Journals (Sweden)

    Wen-Hsiang Su

    2012-10-01

    Full Text Available Myoma is the most common benign neoplasm that can occur in the female reproductive system, most frequently seen in women in their 50s. Although the majority of myomas are asymptomatic, some patients have symptoms and/or signs of varying degrees. Typical myoma-related symptoms or signs include: (1 menstrual disturbances like menorrhagia, dysmenorrhea and intermenstrual bleeding, (2 pelvic pain unrelated to menstruation, (3 compression symptoms, similar to a sensation of bloatedness, urinary frequency and constipation, (4 subfertility status such as recurrent abortion, preterm labor, dystocia with an increased incidence of Cesarean section, and postpartum hemorrhage, and (5 cosmetic problems due to increased abdominal girth However, there are undoubtedly some clinical presentations secondary to uterine myomas are not so specific, such as: (1 uncommon compression-related symptoms, (2 cardiac symptom and atypical symptoms secondary to vascular involvement or dissemination, (3 abdominal symptoms mimicking pelvic carcinomatosis, (4 dyspnea, (5 pruritus, (6 hiccup or internal bleeding, and (7 vaginal protruding mass or uterine inversion. Familiarization with these symptoms and awareness of other unusual or atypical presentations of uterine myomas will remind clinical practitioners of their significance, and of the necessity of follow-up examinations and individualized management to fit the needs and childbirth desires of the patients.

  5. Facilitating complex shape drawing in Williams syndrome and typical development.

    Science.gov (United States)

    Hudson, Kerry D; Farran, Emily K

    2013-07-01

    Individuals with Williams syndrome (WS) produce drawings that are disorganised, likely due to an inability to replicate numerous spatial relations between parts. This study attempted to circumvent these drawing deficits in WS when copying complex combinations of one, two and three shapes. Drawing decisions were reduced by introducing a number of facilitators, for example, by using distinct colours and including facilitatory cues on the response sheet. Overall, facilitation improved drawing in the WS group to a comparable level of accuracy as typically developing participants (matched for non-verbal ability). Drawing accuracy was greatest in both groups when planning demands (e.g. starting location, line lengths and changes in direction) were reduced by use of coloured figures and providing easily distinguished and clearly grouped facilitatory cues to form each shape. This study provides the first encouraging evidence to suggest that drawing of complex shapes in WS can be facilitated; individuals with WS might be receptive to remediation programmes for drawing and handwriting. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Typically Diverse: The Nature of Urban Agriculture in South Australia

    Directory of Open Access Journals (Sweden)

    Georgia Pollard

    2018-03-01

    Full Text Available In our visions of the future, urban agriculture has long been considered an integral part of the ‘sustainable city’. Yet urban agriculture is an incredibly diverse and variable field of study, and many practical aspects remain overlooked and understudied. This paper explores the economic sustainability of urban agriculture by focusing on the physical, practical, and economic aspects of home food gardens in South Australia. New data from the Edible Gardens project online survey is presented on a broad range of current garden setups, including a figure illustrating the statistically typical South Australian food garden. The differences between the survey data and a recent optimized garden model further highlight the gap in knowledge regarding existing home food gardens. With regard to the financial accessibility and economic sustainability of home food gardens, there is also still much more work to be done. Although saving money is a top motivation, with many survey respondents believing that they do succeed in saving money, it remains to be seen whether their current gardening practices support this aspiration. Measurement of the full costs of different gardens would allow for better predictions of whether growing food can save household’s money and under what circumstances.

  7. Dorsal anterior cingulate cortex in typically developing children: Laterality analysis

    Directory of Open Access Journals (Sweden)

    Jue Wang

    2015-10-01

    Full Text Available We aimed to elucidate the dACC laterality in typically developing children and their sex/age-related differences with a sample of 84 right-handed children (6–16 years, 42 boys. We first replicated the previous finding observed in adults that gray matter density asymmetry in the dACC was region-specific: leftward (left > right in its superior part, rightward (left < right in its inferior part. Intrinsic connectivity analysis of these regions further revealed region-specific asymmetric connectivity profiles in dACC as well as their sex and age differences. Specifically, the superior dACC connectivity with frontoparietal network and the inferior dACC connectivity with visual network are rightward. The superior dACC connectivity with the default network (lateral temporal cortex was more involved in the left hemisphere. In contrast, the inferior dACC connectivity with the default network (anterior medial prefrontal cortex was more lateralized towards the right hemisphere. The superior dACC connectivity with lateral visual cortex was more distinct across two hemispheres in girls than that in boys. This connection in boys changed with age from right-prominent to left-prominent asymmetry whereas girls developed the connection from left-prominent to no asymmetry. These findings not only highlight the complexity and laterality of the dACC but also provided insights into dynamical structure–function relationships during the development.

  8. Comparison of typical mega cities in China using emergy synthesis

    Science.gov (United States)

    Zhang, L. X.; Chen, B.; Yang, Z. F.; Chen, G. Q.; Jiang, M. M.; Liu, G. Y.

    2009-06-01

    An emergy-based comparison analysis is conducted for three typical mega cities in China, i.e., Beijing, Shanghai and Guangzhou, from 1990 to 2005 in four perspectives including emergy intensity, resource structure, environmental pressure and resource use efficiency. A new index of non-renewable emergy/money ratio is established to indicate the utilization efficiency of the non-renewable resources. The results show that for the three mega urban systems, Beijing, Shanghai and Guangzhou, the total emergy inputs were 3.76E+23, 3.54E+23, 2.52E+23 sej in 2005, of which 64.88%, 91.45% and 72.28% were imported from the outsides, respectively. As to the indicators of emergy intensity involving the total emergy use, emergy density and emergy use per cap, three cities exhibited similar overall increase trends with annual fluctuations from 1990 to 2005. Shanghai achieved the highest level of economic development and non-renewable resource use efficiency, and meanwhile, lower proportion of renewable resource use and higher environmental pressure compared to those of Beijing and Guangzhou. Guangzhou has long term sustainability considering an amount of local renewable resources used, per capita emergy used, energy consumption per unit GDP and the ratio of waste to renewable emergy. It can be concluded that different emergy-based evaluation results arise from different geographical locations, resources endowments, industrial structures and urban orientations of the concerned mega cities.

  9. Comparative analysis on flexibility requirements of typical Cryogenic Transfer lines

    Science.gov (United States)

    Jadon, Mohit; Kumar, Uday; Choukekar, Ketan; Shah, Nitin; Sarkar, Biswanath

    2017-04-01

    The cryogenic systems and their applications; primarily in large Fusion devices, utilize multiple cryogen transfer lines of various sizes and complexities to transfer cryogenic fluids from plant to the various user/ applications. These transfer lines are composed of various critical sections i.e. tee section, elbows, flexible components etc. The mechanical sustainability (under failure circumstances) of these transfer lines are primary requirement for safe operation of the system and applications. The transfer lines need to be designed for multiple design constraints conditions like line layout, support locations and space restrictions. The transfer lines are subjected to single load and multiple load combinations, such as operational loads, seismic loads, leak in insulation vacuum loads etc. [1]. The analytical calculations and flexibility analysis using professional software are performed for the typical transfer lines without any flexible component, the results were analysed for functional and mechanical load conditions. The failure modes were identified along the critical sections. The same transfer line was then refurbished with the flexible components and analysed for failure modes. The flexible components provide additional flexibility to the transfer line system and make it safe. The results obtained from the analytical calculations were compared with those obtained from the flexibility analysis software calculations. The optimization of the flexible component’s size and selection was performed and components were selected to meet the design requirements as per code.

  10. Aqueous-chlorine leaching of typical Canadian uranium ores

    International Nuclear Information System (INIS)

    Haque, K.E.

    1982-01-01

    Laboratory-scale aqueous-chlorine leaches were conducted on quartz-pebble conglomerates, pegmatite and vein-type ores. Optimum leach temperatures, pulp density and retention times were determined. Uranium extraction of 98 per cent was obtained from the Elliot Lake, Madawaska Mines of Bancroft and Rabbit Lake ores, 96 per cent from the Key Lake ore and 86 per cent from the Agnew Lake ore. However, tailings containing 15-20 pCi g -1 of radium-226 were obtained only from the Elliot Lake and Agnew lake quartz-pebble conglomerates and Bancroft pegmatite-type ores by second-stage leaches with HCl. The second-stage leach results indicate that multistage (3 or 4) acid-chloride or salt-chloride leaches might be effective to obtain tailings containing 15-20 pCi 226 Ra g -1 from the high-grade vein-type ores. Comparative reagent-cost estimates show that the sulphuric-acid leach process is far less expensive than aqueous chlorine leaching. Nevertheless, only the aqueous chlorine and acid-chloride leaches in stages are effective in producing tailings containing 15-20 pCi 226 Ra g -1 from the typical Canadian uranium ores. (Auth.)

  11. Typical intellectual engagement and cognition in old age.

    Science.gov (United States)

    Dellenbach, Myriam; Zimprich, Daniel

    2008-03-01

    Typical Intellectual Engagement (TIE) comprises the preference to engage in cognitively demanding activities and has been proposed as a potential explanatory variable of individual differences in cognitive abilities. Little is known, however, about the factorial structure of TIE, its relations to socio-demographic variables, and its influence on intellectual functioning in old age. In the present study, data of 364 adults (65-81 years) from the Zurich Longitudinal Study on Cognitive Aging (ZULU) were used to investigate the factorial structure of TIE and to examine the hypothesis that TIE is associated more strongly with crystallized intelligence than with fluid intelligence in old age. A measurement model of a second order factor based on a structure of four correlated first order factors (Reading, Problem Solving, Abstract Thinking, and Intellectual Curiosity) evinced an excellent fit. After controlling for age, sex, and formal education, TIE was more strongly associated with crystallized intelligence than with fluid intelligence, comparable to results in younger persons. More detailed analyses showed that this association is mostly defined via Reading and Intellectual Curiosity.

  12. The use of conjunctions by children with typical language development.

    Science.gov (United States)

    Glória, Yasmin Alves Leão; Hanauer, Letícia Pessota; Wiethan, Fernanda Marafiga; Nóro, Letícia Arruda; Mota, Helena Bolli

    2016-07-04

    To investigate the use of conjunctions in the spontaneous speech of three years old children with typical language development, who live in Santa Maria - RS. 45 children, aged 3:0;0 - 3:11;29 (years:months;days) from the database of the Center for the Study of Language and Speech (CELF) participated of this study. The spontaneous speech of each child was transcribed and followed by analysis of the samples to identify the types of conjunctions for each age group. The samples were statistically analyzed using the R software that allowed the evaluation of the number and type of conjunctions used in each age group by comparing them with each other. The data indicated that the higher the age of the child, the greater the number of types of conjunctions used by them. The comparison between age groups showed significant differences when comparing the average number of conjunctions per age group, as well as for additive conjunctions and subordinating conjunctions. At age of three the children begin to develop the grammatical use of conjunctions, early appearing additive, adversative and explanatory coordinating conjunctions, and at 3:6 they are able to use the most complex conjunctions, as subordinating conjunctions.

  13. The neural correlates of attachment security in typically developing children.

    Science.gov (United States)

    Choi, Eun Jung; Taylor, Margot J; Hong, Soon-Beom; Kim, Changdai; Yi, Soon-Hyung

    2018-07-01

    This study investigated neural correlates of children's attachment security using functional magnetic resonance imaging. Fifty-one boys' attachment styles (age mean = 9.5 years, SD = 0.61) were assessed with the Separation Anxiety Test (SAT). We created an fMRI version of the SAT to activate children's attachment system in fMRI environment and contrasted two conditions in which children were instructed to infer the specific feeling of the boy in the picture or to identify objects or physical activities. In the final fMRI analysis (N = 21), attachment security could be detected at the neural level corresponding to the behavioural differences in the attachment interview. Securely attached children showed greater activation in the frontal, limbic and basal ganglia area which included the dorsolateral prefrontal cortex, amygdala, cingulate cortex and striatum, compared to other children who had lower quality of attachment. These regions have a key role in socio-emotional information processing and also represent a brain network related to approach and avoidance motivation in humans. Especially the striatum, strongly linked to reward processing underpinning social approach and avoidance motivation, showed the largest effects in these differences and also positively correlated with emotional openness scores in SAT. This suggests that the quality of attachment configures the approach and avoidance motivational system in our brain mediated by the striatum. Copyright © 2018 Elsevier Inc. All rights reserved.

  14. Research on release rate of volatile organic compounds in typical vessel cabin

    Directory of Open Access Journals (Sweden)

    ZHANG Jinlan

    2018-02-01

    Full Text Available [Objectives] Volatile Organic Compounds (VOC should be efficiently controlled in vessel cabins to ensure the crew's health and navigation safety. As an important parameter, research on release rate of VOCs in cabins is required. [Methods] This paper develops a method to investigate this parameter of a ship's cabin based on methods used in other closed indoor environments. A typical vessel cabin is sampled with Tenax TA tubes and analyzed by Automated Thermal Desorption-Gas Chromatography-Mass Spectrometry (ATD-GC/MS. The lumped mode is used and the release rate of Benzene, Toluene, Ethylbenzene and Xylene (BTEX, the typical representatives of VOCs, is obtained both in closed and ventilated conditions. [Results] The results show that the content of xylene and Total Volatile Organic Compounds (TVOC exceed the indoor environment standards in ventilated conditions. The BTEX release rate is similar in both conditions except for the benzene. [Conclusions] This research builds a method to measure the release rate of VOCs, providing references for pollution character evaluation and ventilation and purification system design.

  15. Aging Management Plan for a Typical Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ebrahimi, Mahsa; Nazififard, Mohammad; Suh, Kune Y. [Seoul National University, Seoul (Korea, Republic of)

    2012-05-15

    Development of an aging management plan (AMP) is a crucial contributor to maintaining the reactor safety and controlling the risk of degradation of the concrete reactor building of a nuclear power plant. The design, operation and utilization of a research reactor (RR) fundamentally differ from those of power reactors. The AMP should nonetheless be present on account of radioactive materials and radiation risks involved. This is mainly because the RR is deemed to be used as an experiment itself or to conduct separate experiments during its operation. The AMP aims to determine the requisites for specific structural concrete components of the reactor building that entail regular inspections and maintenance to ensure safe and reliable operation of the plant. The safety of a RR necessitates the provision which is made in its design to facilitate aging management. Aging management of RR's structures is one of the vital factors to safety, to ensure continued adequacy of the safety level, reliable operation of the reactor, and compliance with the operational limits and conditions.Moreover, engineering systems should be qualified to meet the functional requirements for which they were designed with aging and environmental conditions for all situations and at all times taken into account. This study aims to present an integrated methodology for the application of an AMP for the concrete of the reactor building of a typical RR. For the purpose of safety analysis, geometry and ambient conditions were taken from a 5 MW pool-type, light-water moderated, heterogeneous, solid fuel RR in which the water is also used for cooling and shielding (Fig. 1). The reactor core is immersed in either section of a two-section concrete pool filled with water. This paper makes available background information regarding the document and the strategy developed to manage potential degradation of the reactor building concrete as well as specific programs and preventive and corrective

  16. Typical tumors of the petrous bone; Typische Tumoren des Felsenbeins

    Energy Technology Data Exchange (ETDEWEB)

    Ahlhelm, F.; Mueller, U. [Kantonsspital Baden AG, Abteilung fuer Neuroradiologie, Institut fuer Radiologie, Baden (Switzerland); Ulmer, S. [Medizinisch-Radiologisches Institut, Zuerich (Switzerland)

    2014-04-15

    In the region of the petrous bone, inner acoustic canal and cerebellopontine angle, a variety of different tissues can be found, such as bony, epithelial, neural and vascular structures. Tumorous or tumor-like lesions, vascular or bony malformations or other pathologies can therefore be found in all of these areas. We discuss various frequently occurring tumorous or tumor-like pathologies including congential lesions, such as mucoceles, inflammatory disorders including osteomyelitis, pseudotumors and Wegener's granulomatosis. Benign non-neoplastic lesions, such as cholesteatoma, cholesterol granuloma, epidermoid and benign neoplastic tumors, such as the most commonly found vestibular schwannoma, meningeoma, paraganglioma, vascular pathologies and finally malignant lesions, such as metastasis, chordoma or chondrosarcoma and endolymphatic sac tumor (ELST) are also discussed. The emphasis of this article is on the appearance of these entities in computed tomography (CT) and more so magnetic resonance imaging (MRI), it provides key facts and typical images and discusses possibilities how to distinguish these pathologies. (orig.) [German] In der Region des Felsenbein, inneren Gehoerkanals und Kleinhirnbrueckenwinkels findet sich eine Vielzahl an unterschiedlichen Gewebearten inklusive knoechernes, epitheliales, nervales und vaskulaeres Gewebe. Tumoren oder tumoraehnliche Laesionen, ossaere oder vaskulaere Pathologien koennen entsprechend dort gefunden werden. Wir diskutieren verschiedene Tumoren oder tumoraehnliche Pathologien inklusive angeborene Laesionen wie Muko- und Meningozelen, entzuendliche Veraenderungen wie die Osteomyelitis, Pseudotumoren, die Wegener-Granulomatose, nichtneoplastische Tumoren wie das Epidermoid, Cholesteatom oder Cholesterolgranulom und gutartige neoplastische Tumoren wie das am haeufigsten zu findende Vestibularisschwannom, das Paragangliom und das Meningeom, Gefaessprozesse/-pathologien und schliesslich maligne Laesionen wie Metastasen

  17. Thermal properties of typical chernozems in Kursk Oblast

    Science.gov (United States)

    Arkhangel'skaya, T. A.; Velichenko, M. V.; Tikhonravova, P. I.

    2016-10-01

    Thermal diffusivity and heat capacity of virgin and plowed heavy loamy typical chernozems of Kursk oblast were studied. Thermal diffusivity was determined in the course of step-by-step drying of the initially capillary-saturated samples to the air-dry state. Specific heat capacity was determined for absolutely dry samples. Volumetric heat capacity was calculated according to the de Vries equation. Thermal diffusivity varied within the ranges of (1.15-3.46) × 10-7 m2/s in the Ap horizon, (1.14-3.35) × 10-7 m2/s in the A1 horizon, (1.49-3.70) × 10-7 m2/s in the AB horizon, (1.49-3.91) × 10-7 m2/s in the B1 horizon, and (1.60-3.80) × 10-7 m2/s in the Bca horizon. The thermal diffusivity vs. water content dependencies had distinct maximums and were flattened in the range of low water contents. The maximums were most pronounced for the mineral B1 and Bca horizons; for the A1 and Ap horizons, the curves were rather S-shaped. Volumetric heat capacity of the air-dry soils varied from 0.96 J/(cm3 K) in the A1 horizon to 1.31 J/(cm3 K) in the Bca horizon; in the state of capillary saturation, it varied from 2.79 J/(cm3 K) in the A1 horizon to 3.28 J/(cm3 K) in the Bca horizon. Thermal properties of topsoil horizons were higher in the plowed chernozem compared with the virgin chernozem, which is explained by an increase in the bulk density and a decrease in the organic matter content in the plowed soil.

  18. Integrated SNG Production in a Typical Nordic Sawmill

    Directory of Open Access Journals (Sweden)

    Sennai Mesfun

    2016-04-01

    Full Text Available Advanced biomass-based motor fuels and chemicals are becoming increasingly important to replace fossil energy sources within the coming decades. It is likely that the new biorefineries will evolve mainly from existing forest industry sites, as they already have the required biomass handling infrastructure in place. The main objective of this work is to assess the potential for increasing the profit margin from sawmill byproducts by integrating innovative downstream processes. The focus is on the techno-economic evaluation of an integrated site for biomass-based synthetic natural gas (bio-SNG production. The option of using the syngas in a biomass-integrated gasification combined cycle (b-IGCC for the production of electricity (instead of SNG is also considered for comparison. The process flowsheets that are used to analyze the energy and material balances are modelled in MATLAB and Simulink. A mathematical process integration model of a typical Nordic sawmill is used to analyze the effects on the energy flows in the overall site, as well as to evaluate the site economics. Different plant sizes have been considered in order to assess the economy-of-scale effect. The technical data required as input are collected from the literature and, in some cases, from experiments. The investment cost is evaluated on the basis of conducted studies, third party supplier budget quotations and in-house database information. This paper presents complete material and energy balances of the considered processes and the resulting process economics. Results show that in order for the integrated SNG production to be favored, depending on the sawmill size, a biofuel subsidy in the order of 28–52 €/MWh SNG is required.

  19. Ballistic Characterization Of A Typical Military Steel Helmet

    Directory of Open Access Journals (Sweden)

    Mohamed Ali Maher

    2017-08-01

    Full Text Available In this study the ballistic limit of a steel helmet against a FMJ 919 mm caliber bullet is estimated. The helmet model is the typical polish helmet wz.31.The helmet material showed high strength low alloy steel material of 0.28 carbon content and 9.125 kgm2 areal density. The tensile test according to ASTM E8 showed a tensile strength of 1236.4 MPa .The average hardness value was about HV550. First shooting experiment has been executed using a 9 mm pistol based on 350 ms muzzle velocity at 5m against the simply supported helmet complete penetrations rose in this test were in the form of cracks on the helmet surface and partial penetrations were in the form of craters on the surface whose largest diameter and depth were 43 mm and 20.2 mm consequently .The second experiment was on a rifled gun arrangement 13 bullets of 919 mm caliber were shot on the examined simply supported steel helmet at a zero obliquity angle at different velocities to determine the ballistic limit velocity V50 according to MIL-STD-662F. Three major outcomes were revealed 1 the value V50 which found to be about 390 ms is higher than the one found in literature 360 ms German steel helmet model 1A1. 2 The smallest the standard deviation of the mixed results zone data the most accurate the ballistic limit is. 3Similar to the performance of blunt-ended projectiles impacting overmatching targets tD near 11 or larger It was found that the dominating failure mode of the steel helmet stuck by a hemispherical-nose projectile was plugging mode despite of having tD ratio of about 19 undermatching.

  20. Describing Speech Usage in Daily Activities in Typical Adults.

    Science.gov (United States)

    Anderson, Laine; Baylor, Carolyn R; Eadie, Tanya L; Yorkston, Kathryn M

    2016-01-01

    "Speech usage" refers to what people want or need to do with their speech to meet communication demands in life roles. The purpose of this study was to contribute to validation of the Levels of Speech Usage scale by providing descriptive data from a sample of adults without communication disorders, comparing this scale to a published Occupational Voice Demands scale and examining predictors of speech usage levels. This is a survey design. Adults aged ≥25 years without reported communication disorders were recruited nationally to complete an online questionnaire. The questionnaire included the Levels of Speech Usage scale, questions about relevant occupational and nonoccupational activities (eg, socializing, hobbies, childcare, and so forth), and demographic information. Participants were also categorized according to Koufman and Isaacson occupational voice demands scale. A total of 276 participants completed the questionnaires. People who worked for pay tended to report higher levels of speech usage than those who do not work for pay. Regression analyses showed employment to be the major contributor to speech usage; however, considerable variance left unaccounted for suggests that determinants of speech usage and the relationship between speech usage, employment, and other life activities are not yet fully defined. The Levels of Speech Usage may be a viable instrument to systematically rate speech usage because it captures both occupational and nonoccupational speech demands. These data from a sample of typical adults may provide a reference to help in interpreting the impact of communication disorders on speech usage patterns. Copyright © 2016 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  1. Creating Stakeholder Value through Risk Mitigation Measures in the Context of Disaster Management

    Directory of Open Access Journals (Sweden)

    Minna Räikkönen

    2017-10-01

    Full Text Available The resilience of critical infrastructure (CI to extreme weather events (EWE is one of the most demanding challenges for all stakeholders in modern society. Although partial risk reduction is feasible through the introduction and implementation of various risk mitigation measures (RMM, decision-makers at all decision-making levels are pressured to find ways to cope with the impending extreme weather and to have a thorough understanding of the EWE impacts on CI. This paper discusses how the value of RMMs can be created and assessed in a stakeholder network. Qualitative research methods, namely literature review and AHP (Analytic Hierarchy Process, were applied as research methods. The paper examines how disaster management and value creation both converge and differ from each other. It also presents a case study on the value of various RMM and the impacts of extreme winter conditions on electricity distribution in Finland. Based on the case study, the most important value criterion was the benefits of the RMM in economic, social, and environmental terms. At a fundamental level, the value of RMM should be expressed not only in terms of money but also in regard to safety, security, societal acceptability, CI dependability, and other typically intangible criteria. Moreover, the results reveal that the interrelationship of value creation and disaster management offers new insights to both approaches.

  2. Creating energy security indexes with decision matrices and quantitative criteria

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, Larry; Shupe, Darren

    2010-09-15

    Energy security is becoming an important policy issue in a growing number of jurisdictions because of volatile energy markets and production challenges faced by many producers. As a result, policymakers and politicians are looking for tools or methods that can create an energy security index with results that are justifiable, understandable, and reproducible. This paper describes a method which employs a decision matrix to produce an energy security index using quantitative criteria and metrics. The method allows a range of indexes to be produced, thereby offering further insight into the state of a jurisdiction's energy security.

  3. The non-typical MRI findings of the branchial cleft cysts

    International Nuclear Information System (INIS)

    Hu Chunhong; Wu Qingde; Yao Xuanjun; Chen Jie; Zhu Wei; Chen Jianhua; Xing Jianming; Ding Yi; Ge Zili

    2006-01-01

    Objective: To investigate the non-typical MRI findings of the branchial cleft cysts in order to improve their diagnoses. Methods: 10 cases with branchial cleft cysts proven by surgery and pathology were collected and their MRI features were analyzed. There were 6 male and 4 female, aged 15 to 70, with an averaged age of 37. All patients underwent plain MR scan, 6 patients underwent enhanced scan, and 4 patients underwent magnetic resonance angiography. Results: All 10 cases were second branchial cleft cysts, including 4 of Bailey type I and 6 of type II. The non-typical MRI findings were composed of haematocele (2 cases), extraordinarily thick cyst wall (4 cases), solidified cystic fluid (2 cases), and concomitant canceration (2 cases), which made the diagnoses more difficult. Conclusion: The diagnoses of the branchial cleft cysts with non-typical MRI features should combined with its characteristic of position that located at the lateral portion of the neck adjacent to the anterior border of the sternocleidomastoid muscle at the mandibular angle. The findings, such as thickened wall, ill-defined margin, and vascular involvement or jugular lymphadenectasis, strongly suggest cancerous tendency. (authors)

  4. [Inventory and environmental impact of VOCs emission from the typical anthropogenic sources in Sichuan province].

    Science.gov (United States)

    Han, Li; Wang, Xing-Rui; He, Min; Guo, Wei-Guang

    2013-12-01

    Based on Sichuan province environmental statistical survey data and other relevant activity data, volatile organic compounds (VOCs) emissions from typical anthropogenic sources in Sichuan province were calculated for the year of 2011 by applying the emission factor method. Besides, ozone and secondary organic aerosol formation potentials of these typical anthropogenic sources were discussed. The total VOC emission from these sources was about 482 kt in Sichuan province, biomass burning, solvent utilization, industrial processes, storage and distribution of fuel, and fossil fuel combustion contributed 174 kt, 153 kt, 121 kt, 21 kt and 13 kt, respectively; architecture wall painting, furniture coating, wood decoration painting and artificial board were the major emission sectors of the solvent utilization; while for the industrial processes, 19.4% of VOCs emission was from the wine industry. Chengdu was the largest contributor compared to the other cities in Sichuan, whose VOCs emission from these typical anthropogenic sources in 2011 was 112 kt. OFP of these sources was 1,930 kt altogether. Solvent utilization contributed 50.5% of the total SOA formation potentials, biomass burning and industrial processes both contributed about 23% , with storage and distribution of fuel and fossil fuel combustion accounting for 1% and 1.4%, respectively.

  5. Typical Features of Amelogenesis Imperfecta in Two Patients with Bartter’s Syndrome

    Directory of Open Access Journals (Sweden)

    Hercílio Martelli-Júnior

    2012-12-01

    Full Text Available Background/Aims: Amelogenesis imperfecta (AI is due to many inherited defects of enamel formation that affect the quantity and quality of enamel, leading to delay in tooth eruption and cosmetic consequences. AI has been described in association with nephrocalcinosis, which is called the enamel-renal syndrome. The aim of this case report is to describe typical features of AI in 2 patients with Bartter’s syndrome (BS for the first time. Methods: -Eight patients with confirmed BS were systematically screened for dental abnormalities as part of protocol. Those with suggestive clinical features of AI were submitted to panoramic X-ray and decayed teeth were analyzed by scanning electron microscopy. Results: Typical features of AI were detected in 2 girls with BS. These 2 patients showed nephrocalcinosis, and diagnosis and adequate clinical control were delayed. Genetic analysis detected the mutation responsible for BS in 1 of these patients. In this case, BS was due to a homozygous mutation of exon 5 of the KCNJ1 gene resulting in a substitution of valine for alanine at the codon 214 (A214V. Conclusions: The finding of typical features of AI in BS might constitute preliminary evidence that abnormalities of the biomineralization process found in patients with renal tubular disorders might also affect calcium deposition in dental tissues.

  6. Early Phonological Development: Creating an Assessment Test

    Science.gov (United States)

    Stoel-Gammon, Carol; Williams, A. Lynn

    2013-01-01

    This paper describes a new protocol for assessing the phonological systems of two-year-olds with typical development and older children with delays in vocabulary acquisition. The test (Profiles of Early Expressive Phonological Skills ("PEEPS"), Williams & Stoel-Gammon, in preparation) differs from currently available assessments in…

  7. Innovation for creating a smart future

    Directory of Open Access Journals (Sweden)

    Sang M. Lee

    2018-01-01

    Full Text Available Today, we live in a dynamic and turbulent global community. The wave of mega-trends, including rapid change in globalization and technological advances, is creating new market forces. For any organization to survive and prosper in such an environment, innovation is imperative. However, innovation is no longer just for creating value to benefit individuals, organizations, or societies. The ultimate purpose of innovation should be much more far reaching, helping create a smart future where people can enjoy the best quality of life possible. Thus, innovation must search for intelligent solutions to tackle major social ills, seek more proactive approaches to predict the uncertain future, and pursue strategies to remove barriers to the smart future. This study explores the detailed requirements of a smart future, including both hardware types and soft social/cultural components.

  8. Response of Maize Plant to Phosphorus Fertilization on Typic Distrudepts

    Directory of Open Access Journals (Sweden)

    Antonius Kasno

    2009-05-01

    Full Text Available On the acid soil, phosphorus nutrients become critical for agricultural crops growth. At the present, price of fertilizers significantly increase and fertilizers are not available. These conditions can affect on soil productivity and crop production. The objective of these research were to study the response of maize (Zea mays L. to phosphate fertilizers on Inceptisol. The research was conducted in Cicadas Village on Typic Dystrudept. Experiment was conducted in a randomized completely block design, with 8 treatments and three replications. Treatments consisted of 6 dosages of P fertilizers, which were P source is SP-36 WIKA Agro 0, 10, 20, 40, 60 and 80 kg ha-1. SP-36 and Tunisia rock phosphate (40 kg P ha-1 were used for standard. Pioneer 12 variety of maized was used as an indicator. Plot size was 5 m x 6 m and the maize was planting with distance of 75 cm x 20 cm with one seed per hole. The results showed that organic C and N, P (extracted by Bray 1, K and CEC on the soil were low. Phosphate fertilizers significantly increased which was P extracted by HCl 25% from 24 to 67 mg P 100 g-1 soil and which were extracted by Bray 1 increased from 0,87 to 63.31 mg P kg-1 soil. Phosphate fertilizers significantly increased plant height from 175.2 cm become to 221.1 cm. Plant height of maize using SP-36 WIKA Agro fertilizer (210.6 cm was similar to plant heigh using SP-36 fertilizer (213.4 cm but less height from Tunisia rock phosphate. The yield of maize on SP-36 WIKA Agro (4.94 t ha-1 were linely higher than SP-36 (4.69 t ha-1, significantly was higher than that of Tunisia rock phosphate. Maximum dosage of SP-36 fertilizer was 66.67 kg P ha-1, and optimum dosage was 42 kg P ha-1. Value of Relative Agronomic Effectiveness SP-36 WIKA Agro fertilizer was heigher than SP-36.

  9. [Investigation of typical melamine urinary stones using infrared spectra].

    Science.gov (United States)

    Si, Min-Zhen; Li, Qing-Yun; Liu, Ren-Ming; Kang, Yi-Pu; Wang, Kun-Hua; Zhang, Zhi-Guo

    2010-02-01

    A typical melamine kidney stone confirmed by some medicine expert was collected from the first people's hospital of Yunnan. The kidney stone was adequately determined by PE corporation spectra 100(with resolution of 1 cm(-1)). The stone samples for FTIR analysis were prepared using the KBr pellet technique, where 2 mg of the pretreated stone powder was mixed with 200 mg of analytical grade KBr using an agate pestle and mortar. The digital spectrum was then scanned in the mid-infrared region from 4 000 to 400 cm(-1) at room temperature. The appearing bands between 4 000 and 2 000 cm(-1) were 3 487, 3 325, 3 162 and 2 788 cm(-1), those between 1 700 and 1 000 cm(-1) were 1 694, 1 555, 1 383, 1 340, 1 189 and 1 122 cm(-1), and those between 1 000 and 400 cm(-1) were 993, 782, 748, 709, 624, 585, 565 and 476 cm(-1). It was found that the main constituent of calculi showed few comparability with cat kidney stone, which was from cats that died after consuming the contaminated food, and confirmed that these deposits were primarily composed of melamine and cyanuric acid compared to the IR spectra of calculi in literature. It was also found that the main constituent of calculi showed few comparability with popular kidney stone by comparison with the IR spectra of calculi in literature. The spectrum of calculi was 50% respectively similar with melamine and uric acid as compared with the IR spectrum. It was found that the main constituent of calculi was melamine itself and uric acid as compared with the IR spectra of calculi and melamine: (1 : 1), because the spectrum of calculi was 83. 3% similar to melamine and uric acid (1 : 1). The appearing bands of melamine and uric acid (1 : 1) between 4 000 and 2 000 cm(-1) were 3 469, 3 419, 3 333, 3 132, 3 026, 2 827 cm(-1), those between 1 700 and 1 000 cm(-1) were 1 696, 1 656, 1 555, 1 489, 1 439, 1 350, 1 311, 1 198, 1 124 and 1 028 cm(-1), and those between 1 000 and 400 cm(-1) were 993, 878, 814, 784, 745, 708, 619, 577 and

  10. Can Physical Examination Create a Stener Lesion?

    Science.gov (United States)

    Lankachandra, Manesha; Eggers, John P; Bogener, James W; Hutchison, Richard L

    2017-09-01

    The purpose of this study is to determine whether a Stener lesion can be created while testing stability of the ulnar collateral ligament (UCL) of the thumb. Testing was performed in a manner that reproduced clinical examination. Six fresh frozen hand and forearm specimens underwent sequential sectioning of the accessory UCL, the proper UCL, and the ulnar sagittal band. Measurements of radial deviation of the metacarpophalangeal (MCP) joint were taken with the thumb in neutral rotation, pronation and supination, both with 0 degrees and with 30 degrees of flexion of the MCP joint. Visual examination was performed to assess the presence of a Stener lesion. No Stener lesion was created in any position as long as the fascial origin of the ulnar sagittal band at the adductor pollicis longus remained intact. After creating a defect in the ulnar sagittal band, a Stener lesion was created in two specimens, but only when the thumb was flexed and supinated. Pronation provided more stability, and supination provided less stability, with one or both components cut, especially when testing at 30° of flexion. Compared to both components cut without flexion or rotation, there was a statistically significant difference in angulation with the 30 degrees of MCP joint flexion in both neutral rotation in supination. Performing a physical examination to assess the amount of instability of an ulnar collateral ligament injury did not create a Stener lesion if the exam was performed in a controlled, gentle manner with the thumb held without rotation. If the thumb is held in neutral rotation during the exam, an iatrogenic Stener lesion should not be created.

  11. Creating the Economy of Virtuality: Systemic Aspects and Educational Considerations

    Directory of Open Access Journals (Sweden)

    Julio Rezende

    2016-06-01

    Full Text Available This article discuss how an economy of virtuality had been created in Orlando, United States, with the great collaboration of entrepreneurs, creativists and the action of academic institutions like University of Central Florida (UCF. In UCF the Florida Interactive Entertainment Academy – FIEA is an exemplary initiative of education that aims at creating new professionals for the economy of virtuality. Examining the case of Orlando city, would be seen the economic outcomes of the operation of different activities of virtuality: creation of jobs, revenues, tax and improving the quality of life of this community. The research debates the understanding of Economy of Virtuality and as also a educational field. The virtuality can been seen as a technology (a combination of developed hardware and software and as a psychological experience (values, time/ availability, health, motivation, emotions and education. The article presents the story of virtuality and also a typical pathway in the creation of products in Economy of Virtuality taking the example of Spider-Man and the event Awesome.Con held in Washington D.C. in the period of 3 to 5 June 2016. At Central Florida Research Park (CFRP, there are 146 businesses in 59 buildings (March/2016 generating aproximally10 thousand jobs operating.

  12. Iterating between Tools to Create and Edit Visualizations.

    Science.gov (United States)

    Bigelow, Alex; Drucker, Steven; Fisher, Danyel; Meyer, Miriah

    2017-01-01

    A common workflow for visualization designers begins with a generative tool, like D3 or Processing, to create the initial visualization; and proceeds to a drawing tool, like Adobe Illustrator or Inkscape, for editing and cleaning. Unfortunately, this is typically a one-way process: once a visualization is exported from the generative tool into a drawing tool, it is difficult to make further, data-driven changes. In this paper, we propose a bridge model to allow designers to bring their work back from the drawing tool to re-edit in the generative tool. Our key insight is to recast this iteration challenge as a merge problem - similar to when two people are editing a document and changes between them need to reconciled. We also present a specific instantiation of this model, a tool called Hanpuku, which bridges between D3 scripts and Illustrator. We show several examples of visualizations that are iteratively created using Hanpuku in order to illustrate the flexibility of the approach. We further describe several hypothetical tools that bridge between other visualization tools to emphasize the generality of the model.

  13. Characterization of typical Tunisian fermented milk, rayeb | Samet ...

    African Journals Online (AJOL)

    Traditional Tunisian fermented milk, rayeb, was produced according to the traditional method. Physicochemical, microstructural, microbiological characteristics and major aromatic compounds evaluation were studied. The results show a decrease in lactose content and pH value and an increase in lactic acid during ...

  14. Measurements of radon progeny activity on typical indoor surfaces

    International Nuclear Information System (INIS)

    Knutson, E.O.; Gogolak, C.V.; Klemic, G.

    1992-01-01

    A number of studies aimed at defining how well radon progeny on surfaces can be measured, information that is needed in order to test physical/mathematical models governing indoor radon progeny behaviour, are described. One experiment compared the decomposition on to different surfaces. Only relatively small differences were found among metal, filter paper, broadcloth, corduroy fabric, vinyl wallpaper, glass, and latex paint, but polyethylene film collected two to four times as much as the others, due most likely to electrostatic charge on the plastic surface. Another experiment compared the gamma and gross alpha count methods of measuring surface activity for metal, filter paper, broadcloth and corduroy surfaces. No difference for the surfaces tested was found from which it is concluded that, even for rougher surfaces, progeny atoms deposit mainly on the outer layers. A final experiment compared in situ and surrogate-surface methods for measuring surface deposition. For most tests, the two methods agreed within 30%, and the average ratio was not significantly different from unity. 210 Po is a complication in the in situ method. An unexpected location effect was found in the experiments conducted in houses with high radon concentrations: the deposition on the ceiling was higher than on the surfaces. (author)

  15. Aquifer characteristics and groundwater recharge pattern in a typical ...

    African Journals Online (AJOL)

    EJIRO

    method in the delineation of bedrock structures, depth to possible aquifer units and to ... makes for susceptibility to surface contaminants; and (iii) ... regional tectonic setting which are critical to identifying favourable ... Data acquisition and processing. Thirty four ... The VES analysis shows a minimum of three and a maximum ...

  16. Creating dynamic UI with Android fragments

    CERN Document Server

    Wilson, Jim

    2013-01-01

    A fast-paced tutorial that guides you through everything you need to know about dynamic UI design for Android devices.This book is for developers with a basic understanding of Android programming who would like to improve the appearance and usability of their applications. Whether you're looking to create a more interactive user experience, create more dynamically adaptive UIs, provide better support for tablets and smartphones in a single app, reduce the complexity of managing your app UIs, or you are just trying to expand your UI design philosophy, then this book is for you.

  17. Creating e-learning games with Unity

    CERN Document Server

    Horachek, David

    2014-01-01

    Unity is a fully integrated development engine providing the required functionality to create games and interactive 3D content, while reducing the time, effort, and cost of developing the content. Nowadays, many people have started to use Unity in an eLearning setting as it allows them to create real-world scenarios, or models, for training purposes. With Unity, one can develop video games that are not only fun, but are also effective teaching and learning tools. When properly designed, an engaging game is an ideal platform for the presentation, testing, and application of learning objectives.

  18. Creating a Website The Missing Manual

    CERN Document Server

    MacDonald, Matthew

    2011-01-01

    Think you need an army of skilled programmers to build a website? Think again. With nothing more than an ordinary PC, some raw ambition, and this book, you'll learn how to create and maintain a professional-looking, visitor-friendly site. This Missing Manual gives you all the tools, techniques, and expert advice you need. Plan your site. Create web pages by learning the basics of HTML and HTML5.Control page design with CSS. Format text, images, links, tables, and other elements.Attract visitors. Ensure that people can find your site through popular search engines.Build a community. Add forums

  19. Creating a web site the missing manual

    CERN Document Server

    MacDonald, Matthew

    2008-01-01

    Think you have to be a technical wizard to build a great web site? Think again. If you want to create an engaging web site, this thoroughly revised, completely updated edition of Creating a Web Site: The Missing Manual demystifies the process and provides tools, techniques, and expert guidance for developing a professional and reliable web presence. Whether you want to build a personal web site, an e-commerce site, a blog, or a web site for a specific occasion or promotion, this book gives you detailed instructions and clear-headed advice for: Everything from planning to launching. From pi

  20. Creating library tutorials for nursing students.

    Science.gov (United States)

    Schroeder, Heidi

    2010-04-01

    This article describes one librarian's experiences with creating, promoting, and assessing online library tutorials. Tutorials were designed to provide on-demand and accessible library instruction to nursing students at Michigan State University. Topics for tutorials were chosen based on the librarian's liaison experiences and suggestions from nursing faculty. The tutorials were created using Camtasia and required the application of several tools and techniques. Tutorials were promoted through Web pages, the ANGEL course management system, blog posts, librarian interactions, e-mails, and more. In order to assess the tutorials' perceived effectiveness, feedback was gathered using a short survey. Future plans for the nursing tutorials project are also discussed.

  1. How to create a serious game?

    Directory of Open Access Journals (Sweden)

    O. Heidmann

    2015-11-01

    Full Text Available Serious games are video games designed to achieve an educational effect and achieve some degree of training in a certain area. They are nowadays used in industries such as defense, education, scientific exploration, health care, emergency management, city planning, engineering, and many others. As it still a nascent subject who doesn’t follow exactly the same rules and practices than the commercial video games industry, questions remain about how to create and use serious games. This article presents some know-how on the subject of creating serious games.

  2. Perfect-use and typical-use Pearl Index of a contraceptive mobile app.

    Science.gov (United States)

    Berglund Scherwitzl, E; Lundberg, O; Kopp Kallner, H; Gemzell Danielsson, K; Trussell, J; Scherwitzl, R

    2017-12-01

    The Natural Cycles application is a fertility awareness-based contraceptive method that uses dates of menstruation and basal body temperature to inform couples whether protected intercourse is needed to prevent pregnancies. Our purpose with this study is to investigate the contraceptive efficacy of the mobile application by evaluating the perfect- and typical-use Pearl Index. In this prospective observational study, 22,785 users of the application logged a total of 18,548 woman-years of data into the application. We used these data to calculate typical- and perfect-use Pearl Indexes, as well as 13-cycle pregnancy rates using life-table analysis. We found a typical-use Pearl Index of 6.9 pregnancies per 100 woman-years [95% confidence interval (CI): 6.5-7.2], corrected to 6.8 (95% CI: 6.4-7.2) when truncating users after 12months. We estimated a 13-cycle typical-use failure rate of 8.3% (95% CI: 7.8-8.9). We found that the perfect-use Pearl Index was 1.0 pregnancy per 100 woman-years (95% CI: 0.5-1.5). Finally, we estimated that the rate of pregnancies from cycles where the application erroneously flagged a fertile day as infertile was 0.5 (95% CI: 0.4-0.7) per 100 woman-years. We estimated a discontinuation rate over 12months of 54%. This study shows that the efficacy of a contraceptive mobile application is higher than usually reported for traditional fertility awareness-based methods. The application may contribute to reducing the unmet need for contraception. The measured typical- and perfect-use efficacies of the mobile application Natural Cycles are important parameters for women considering their contraceptive options as well as for the clinicians advising them. The large available data set in this paper allows for future studies on acceptability, for example, by studying the efficacy for different cohorts and geographic regions. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

  3. A review of typical thermal fatigue failure models for solder joints of electronic components

    Science.gov (United States)

    Li, Xiaoyan; Sun, Ruifeng; Wang, Yongdong

    2017-09-01

    For electronic components, cyclic plastic strain makes it easier to accumulate fatigue damage than elastic strain. When the solder joints undertake thermal expansion or cold contraction, different thermal strain of the electronic component and its corresponding substrate is caused by the different coefficient of thermal expansion of the electronic component and its corresponding substrate, leading to the phenomenon of stress concentration. So repeatedly, cracks began to sprout and gradually extend [1]. In this paper, the typical thermal fatigue failure models of solder joints of electronic components are classified and the methods of obtaining the parameters in the model are summarized based on domestic and foreign literature research.

  4. Prediction of the Electromagnetic Field Distribution in a Typical Aircraft Using the Statistical Energy Analysis

    Science.gov (United States)

    Kovalevsky, Louis; Langley, Robin S.; Caro, Stephane

    2016-05-01

    Due to the high cost of experimental EMI measurements significant attention has been focused on numerical simulation. Classical methods such as Method of Moment or Finite Difference Time Domain are not well suited for this type of problem, as they require a fine discretisation of space and failed to take into account uncertainties. In this paper, the authors show that the Statistical Energy Analysis is well suited for this type of application. The SEA is a statistical approach employed to solve high frequency problems of electromagnetically reverberant cavities at a reduced computational cost. The key aspects of this approach are (i) to consider an ensemble of system that share the same gross parameter, and (ii) to avoid solving Maxwell's equations inside the cavity, using the power balance principle. The output is an estimate of the field magnitude distribution in each cavity. The method is applied on a typical aircraft structure.

  5. A pattern recognition methodology for evaluation of load profiles and typical days of large electricity customers

    International Nuclear Information System (INIS)

    Tsekouras, G.J.; Kotoulas, P.B.; Tsirekis, C.D.; Dialynas, E.N.; Hatziargyriou, N.D.

    2008-01-01

    This paper describes a pattern recognition methodology for the classification of the daily chronological load curves of each large electricity customer, in order to estimate his typical days and his respective representative daily load profiles. It is based on pattern recognition methods, such as k-means, self-organized maps (SOM), fuzzy k-means and hierarchical clustering, which are theoretically described and properly adapted. The parameters of each clustering method are properly selected by an optimization process, which is separately applied for each one of six adequacy measures. The results can be used for the short-term and mid-term load forecasting of each consumer, for the choice of the proper tariffs and the feasibility studies of demand side management programs. This methodology is analytically applied for one medium voltage industrial customer and synoptically for a set of medium voltage customers of the Greek power system. The results of the clustering methods are presented and discussed. (author)

  6. Modelling of Conveyor Belt Passage by Driving Drum Using Finite Element Methods

    Directory of Open Access Journals (Sweden)

    Nikoleta Mikušová

    2017-12-01

    Full Text Available The finite element methods are used in many disciplines by the development of products, typically in mechanical engineering (for example in automotive industry, biomechanics, etc.. Some modern programs of the finite element's methods have specific tools (electromagnetic, fluid and structural simulations. The finite elements methods allow detailed presentation of structures by bending or torsion, complete design, testing and optimization before the prototype production. The aims of this paper were to the model of conveyor belt passage by driving drum. The model was created by the program Abaqus CAE. The created model presented data about forces, pressures, and deformation of the belt conveyor.

  7. A holistic evaluation of a typical beach nourishment

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Frigaard, Peter; Wahl, Niels Arne

    2007-01-01

    is the primary method used by the Danish Coastal Authority for coastal protection and represents a management tool which serves a dual purpose. Beach Nourishment is protecting coastal lands as well as backshore properties (infrastructures, buildings etc.) and preserving natural heritages. Nevertheless, more...... an example of a holistic evaluation of a 721.000 m3  (155 m3 /m) Beach Nourishment done at the Danish West Coast in 2005....

  8. Creating strategic brand management manual : Case: Tukikallio Oy

    OpenAIRE

    Vepsäläinen, Sini

    2010-01-01

    The purpose of this Thesis was to create a Strategic Brand Management Manual for the use of a new company called Tukikallio Oy. The manual was composed of the elements that the company wanted to include in it. A qualitative research method was used in collecting information. The theoretical part of the thesis includes theories about brand building. Brand identity tells what the brand really is with its positive and negative sides, image reflects on what kind of things the consumer associa...

  9. Creating a Total Object of Art.

    Science.gov (United States)

    Klie, Evelyn Busch

    2003-01-01

    Discusses a workshop that accompanied the author's exhibit, "A Sense of Place: Paintings by Evelyn Busch Klie." Explains that students created a watercolor painting and a clay frame or base with details in it. Includes a list of art materials and learning objectives. (CMK)

  10. Strategies for Creating New Venture Legitimacy

    Science.gov (United States)

    Karlsson, Tomas; Middleton, Karen Williams

    2015-01-01

    New ventures, being heavily subjected to liabilities of newness, are seen to engage in legitimacy strategies to overcome these liabilities. Building on an adapted theoretical framework of organizational legitimacy, self-reported weekly diaries of twelve entrepreneurs were analysed to identify strategies used by new ventures to create legitimacy.…

  11. Creating by Reusing Learning Design Solutions

    NARCIS (Netherlands)

    Hernández-Leo, Davinia; Harrer, Andreas; Dodero, Juan Manuel; Asensio-Pérez, Juan; Burgos, Daniel

    2006-01-01

    Hernández-Leo, D., Harrer, A., Dodero, J. M., Asension-Pérez, J. I., & Burgos, D. (2006). Creating by reusing Learning Design solutions. Proceedings of 8th Simposo Internacional de Informática Educativa, León, Spain: IEEE Technical Committee on Learning Technology. Retrieved October 3rd, 2006, from

  12. Creating Innovative Student Projects with App Smashing

    Science.gov (United States)

    Young, Donna

    2014-01-01

    The potential for using various apps to improve student learning is tremendous. Yet, despite the iPad's possibilities, apps are often limited in their functionality. No one has created that magical, one-size-fits-all app that accomplishes all of the tasks that you had in mind. Luckily, there is an answer to this common problem: app smashing.…

  13. How do entrepreneurs think they create value?

    DEFF Research Database (Denmark)

    Lyth Frederiksen, Dennis; Brem, Alexander

    2017-01-01

    The means with which entrepreneurs create and capture value can be difficult to get a comprehensive picture of. Looking at the tools they use can offer insights, and in this context, the book “The Lean Startup” by Eric Ries has received a tremendous amount of attention. Supposedly, many...

  14. Creating social impact with side-events

    NARCIS (Netherlands)

    Hover, Paul; Dijk, Bake; Breedveld, Koen; van Eekeren, Frank; Slender, Hans

    All over the world, sport events are seen as significant tools for creating positive social impact. This is understandable, as sport events have the power to attract enthusiastic participants, volunteers and to reach large audiences of visitors and followers via (social) media. Outbursts of

  15. Creating Spaces to Support Transgender Youth

    Science.gov (United States)

    McGuire, Jenifer K.; Conover-Williams, Meredith

    2010-01-01

    This article explores the opportunity to create spaces within the family, school, and community that specifically promote the well-being of transgender adolescents and young adults. When social contexts are supportive, transgender youth report significantly less risk. Supportive home and school environments have been linked to better outcomes…

  16. Does the New Economy Create Higher Productivity?

    DEFF Research Database (Denmark)

    Dilling-Hansen, Mogens; Madsen, Erik Strøjer; Smith, Valdemar

    2002-01-01

    The rapid and continuous growth in the US in the 1990s and the simultaneous boom in the IT industry created the concept "The New Economy". What connects the two phenomena is that the IT industry alone is considered productive, and increased productivity in other industries, as a result of increased...

  17. The NAi effect: creating architecture culture

    NARCIS (Netherlands)

    Figueiredo, S.M.

    2016-01-01

    At a time when cultural institutions (both in the Netherlands and abroad) are adjusting to new societal and political conditions (and financial restrictions), The NAi Effect aims to elucidate the social and cultural aims of architecture museums and their impact in creating architecture culture.

  18. Creating a Sun-Safe Camp.

    Science.gov (United States)

    Landrey, Ann

    1996-01-01

    Strategies for minimizing sun exposure of campers and staff include educating campers about the sun's effect on their skin, scheduling activities when the sun is less intense, creating shade at the camp site, incorporating sun protection into camp dress code, and training staff regarding sun protection. Addresses OSHA and liability issues. (LP)

  19. Inclusive Information Societies: Creating Growth and Employment ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Employment for youth and women. The project has two components. The first focuses on outsourcing service sector work (micro-work and rural impact sourcing) in India, Sri Lanka, and the Philippines. This sector can play a vital role in creating employment, particularly for youth and women in semi-urban and rural areas.

  20. CREATING INPUT TABLES FROM WAPDEG FOR RIP

    International Nuclear Information System (INIS)

    K.G. Mon

    1998-01-01

    The purpose of this calculation is to create tables for input into RIP ver. 5.18 (Integrated Probabilistic Simulator for Environmental Systems) from WAPDEG ver. 3.06 (Waste Package Degradation) output. This calculation details the creation of the RIP input tables for TSPA-VA REV.00