WorldWideScience

Sample records for methods sw-846 3rd

  1. Adaptation of the TCLP and SW-846 methods to radioactive mixed waste

    International Nuclear Information System (INIS)

    Griest, W.H.; Schenley, R.L.; Caton, J.E.; Wolfe, P.F.

    1994-01-01

    Modifications of conventional sample preparation and analytical methods are necessary to provide radiation protection and to meet sensitivity requirements for regulated constituents when working with radioactive samples. Adaptations of regulatory methods for determining ''total'' Toxicity Characteristic Leaching Procedure (TCLP) volatile and semivolatile organics and pesticides, and for conducting aqueous leaching are presented

  2. Single-laboratory evaluation of SW-846 Methods 7090/7091 determination of beryllium by flame and furnace atomic absorption spectrophotometry. Summary report January-August 1987

    International Nuclear Information System (INIS)

    Hodge, V.F.; Darby, D.A.; Thompson, W.E.; Jones, C.L.

    1988-02-01

    The results of a single-laboratory study of the Determination of Beryllium by Flame and Furnace Atomic Absorption Spectrophotometry, are described. The study examined the application of these two powerful beryllium detection methods to the analysis of selected liquid and solid samples after digestion by appropriate SW-846 methods. Method performance data including detection limits, optimum concentration ranges (linearity), spike recoveries, interferences, precision, accuracy, and optimum operating parameters are presented and discussed

  3. Test Methods for Evaluating Solid Waste, Physical/Chemical Methods. First Update. (3rd edition)

    International Nuclear Information System (INIS)

    Friedman; Sellers.

    1988-01-01

    The proposed Update is for Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846, Third Edition. Attached to the report is a list of methods included in the proposed update indicating whether the method is a new method, a partially revised method, or a totally revised method. Do not discard or replace any of the current pages in the SW-846 manual until the proposed update I package is promulgated. Until promulgation of the update package, the methods in the update package are not officially part of the SW-846 manual and thus do not carry the status of EPA-approved methods. In addition to the proposed Update, six finalized methods are included for immediate inclusion into the Third Edition of SW-846. Four methods, originally proposed October 1, 1984, will be finalized in a soon to be released rulemaking. They are, however, being submitted to subscribers for the first time in the update. These methods are 7211, 7381, 7461, and 7951. Two other methods were finalized in the 2nd Edition of SW-846. They were inadvertantly omitted from the 3rd Edition and are not being proposed as new. These methods are 7081 and 7761

  4. EPA Method 3031 (SW-846): Acid Digestion of Oils for Metals Analysis by Atomic Absorption or ICP Spectrometry

    Science.gov (United States)

    Procedures are described for analysis of water samples and may be adapted for assessment of solid, particulate and liquid samples. The method uses real-time PCR assay for detecting Toxoplasma gondii DNA using gene-specific primers and probe.

  5. EPA Method 8321B (SW-846): Solvent-Extractable Nonvolatile Compounds by High Performance Liquid Chromatography-Thermospray-Mass Spectrometry (HPLC-TS-MS) or Ultraviolet (UV) Detection

    Science.gov (United States)

    Method 8321B describes procedures for preparation and analysis of solid, aqueous liquid, drinking water and wipe samples using high performance liquid chromatography and mass spectrometry for extractable non-volatile compounds.

  6. Adaptation of SW-846 methodology for the organic analysis of radioactive mixed wastes

    International Nuclear Information System (INIS)

    Griest, W.H.; Schenley, R.L.; Tomkins, B.A.; Caton, J.E. Jr.; Fleming, G.S.; Harmon, S.H.; Wachter, L.J.; Garcia, M.E.; Edwards, M.D.

    1990-01-01

    Modifications to SW-846 sample preparation methodology permit the organic analysis of radioactive mixed waste with minimum personal radiation exposure and equipment contamination. This paper describes modifications to SW-846 methods 5030 and 3510-3550 for sample preparation in radiation-zoned facilities (hood, glove box, and hot cell) and GC-MS analysis of the decontaminated organic extracts in a conventional laboratory for volatile and semivolatile organics by methods 8240 and 8270 (respectively). Results will be presented from the analysis of nearly 70 nuclear waste storage tank liquids and 17 sludges. Regulatory organics do not account for the organic matter suggested to be present by total organic carbon measurements. 7 refs., 5 tabs

  7. 3rd Workshop on "Combinations of Intelligent Methods and Applications"

    CERN Document Server

    Palade, Vasile

    2013-01-01

    The combination of different intelligent methods is a very active research area in Artificial Intelligence (AI). The aim is to create integrated or hybrid methods that benefit from each of their components.  The 3rd Workshop on “Combinations of Intelligent Methods and Applications” (CIMA 2012) was intended to become a forum for exchanging experience and ideas among researchers and practitioners who are dealing with combining intelligent methods either based on first principles or in the context of specific applications. CIMA 2012 was held in conjunction with the 22nd European Conference on Artificial Intelligence (ECAI 2012).This volume includes revised versions of the papers presented at CIMA 2012.  .

  8. 78 FR 63185 - Waste Management System; Testing and Monitoring Activities; Update V of SW-846

    Science.gov (United States)

    2013-10-23

    ... be consistent with implementation and promotion of a flexible and performance-based approach to RCRA... the method to introduce new technologies that may increase productivity, but do not change the...

  9. Book review: Social Research: Issues, Methods and Process, 3rd edition, by Tim May, Open University Press, 2001, ISBN 0335206123

    OpenAIRE

    Jones, Keith

    2004-01-01

    The great strength of this book by Tim May ("Social Research: Issues, Methods and Process", 3rd edition ) is its successful negotiation (perhaps navigation) of the relationships between theory and method in (social) research.

  10. PREFACE: 3rd Workshop on Theory, Modelling and Computational Methods for Semiconductors (TMCSIII)

    Science.gov (United States)

    Califano, Marco; Migliorato, Max; Probert, Matt

    2012-05-01

    These conference proceedings contain the written papers of the contributions presented at the 3rd International Conference on Theory, Modelling and Computational Methods for Semiconductor materials and nanostructures. The conference was held at the School of Electronic and Electrical Engineering, University of Leeds, Leeds, UK on 18-20 January 2012. The previous conferences in this series took place in 2010 at St William's College, York and in 2008 at the University of Manchester, UK. The development of high-speed computer architectures is finally allowing the routine use of accurate methods for calculating the structural, thermodynamic, vibrational, optical and electronic properties of semiconductors and their hetero- and nano-structures. The scope of this conference embraces modelling, theory and the use of sophisticated computational tools in semiconductor science and technology, where there is substantial potential for time-saving in R&D. Theoretical approaches represented in this meeting included: Density Functional Theory, Tight Binding, Semiempirical Pseudopotential Methods, Effective Mass Models, Empirical Potential Methods and Multiscale Approaches. Topics included, but were not limited to: Optical and Transport Properties of Quantum Nanostructures including Colloids and Nanotubes, Plasmonics, Magnetic Semiconductors, Graphene, Lasers, Photonic Structures, Photovoltaic and Electronic Devices. This workshop ran for three days, with the objective of bringing together UK and international leading experts in the theoretical modelling of Group IV, III-V and II-VI semiconductors, as well as students, postdocs and early-career researchers. The first day focused on providing an introduction and overview of this vast field, aimed particularly at students, with several lectures given by recognised experts in various theoretical approaches. The following two days showcased some of the best theoretical research carried out in the UK in this field, with several

  11. FOREWORD: 3rd International Workshop on New Computational Methods for Inverse Problems (NCMIP 2013)

    Science.gov (United States)

    Blanc-Féraud, Laure; Joubert, Pierre-Yves

    2013-10-01

    Conference logo This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 3rd International Workshop on New Computational Methods for Inverse Problems, NCMIP 2013 (http://www.farman.ens-cachan.fr/NCMIP_2013.html). This workshop took place at Ecole Normale Supérieure de Cachan, in Cachan, France, on 22 May 2013, at the initiative of Institut Farman. The prior editions of NCMIP also took place in Cachan, France, firstly within the scope of the ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/), and secondly at the initiative of Institut Farman, in May 2012 (http://www.farman.ens-cachan.fr/NCMIP_2012.html). The NCMIP Workshop focused on recent advances in the resolution of inverse problems. Indeed inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finances. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational

  12. Proceedings, 3rd International Satellite Conference on Mathematical Methods in Physics (ICMP13)

    CERN Document Server

    2013-01-01

    The aim of the Conference is to present the latest advances in Mathematical Methods to researchers, post-docs and graduated students acting in the areas of Physics of Particles and Fields, Mathematical Physics and Applied Mathematics. Topics: Methods of Spectral and Group Theory, Differential and Algebraic Geometry and Topology in Field Theory, Quantum Gravity, String Theory and Cosmology.

  13. 3rd International Conference on Numerical Analysis and Optimization : Theory, Methods, Applications and Technology Transfer

    CERN Document Server

    Grandinetti, Lucio; Purnama, Anton

    2015-01-01

    Presenting the latest findings in the field of numerical analysis and optimization, this volume balances pure research with practical applications of the subject. Accompanied by detailed tables, figures, and examinations of useful software tools, this volume will equip the reader to perform detailed and layered analysis of complex datasets. Many real-world complex problems can be formulated as optimization tasks. Such problems can be characterized as large scale, unconstrained, constrained, non-convex, non-differentiable, and discontinuous, and therefore require adequate computational methods, algorithms, and software tools. These same tools are often employed by researchers working in current IT hot topics such as big data, optimization and other complex numerical algorithms on the cloud, devising special techniques for supercomputing systems. The list of topics covered include, but are not limited to: numerical analysis, numerical optimization, numerical linear algebra, numerical differential equations, opt...

  14. (Re)interpreting LHC New Physics Search Results : Tools and Methods, 3rd Workshop

    CERN Document Server

    The quest for new physics beyond the SM is arguably the driving topic for LHC Run2. LHC collaborations are pursuing searches for new physics in a vast variety of channels. Although collaborations provide various interpretations for their search results, the full understanding of these results requires a much wider interpretation scope involving all kinds of theoretical models. This is a very active field, with close theory-experiment interaction. In particular, development of dedicated methodologies and tools is crucial for such scale of interpretation. Recently, a Forum was initiated to host discussions among LHC experimentalists and theorists on topics related to the BSM (re)interpretation of LHC data, and especially on the development of relevant interpretation tools and infrastructure: https://twiki.cern.ch/twiki/bin/view/LHCPhysics/InterpretingLHCresults Two meetings were held at CERN, where active discussions and concrete work on (re)interpretation methods and tools took place, with valuable cont...

  15. The Effect of Acid Neutralization on Analytical Results Produced from SW846 Method 8330 after the Alkaline Hydrolysis of Explosives in Soil

    Science.gov (United States)

    2012-09-01

    lime addition. .............................................................................. 16  Figure 10. Effect of pre-extraction acidification of...approximately 20 grams of soil in a plastic pan and adding 20-mL of acid (two different acids were used, and are described below). The resulting soil...levels of soil moisture, and two conditions with pre-extraction acidification . Two of these conditions were controls without lime addition: condition A

  16. 3rd Abel Symposium

    CERN Document Server

    Owren, Brynjulf

    2008-01-01

    The 2006 Abel symposium is focusing on contemporary research involving interaction between computer science, computational science and mathematics. In recent years, computation has been affecting pure mathematics in fundamental ways. Conversely, ideas and methods of pure mathematics are becoming increasingly important within computational and applied mathematics. At the core of computer science is the study of computability and complexity for discrete mathematical structures. Studying the foundations of computational mathematics raises similar questions concerning continuous mathematical structures. There are several reasons for these developments. The exponential growth of computing power is bringing computational methods into ever new application areas. Equally important is the advance of software and programming languages, which to an increasing degree allows the representation of abstract mathematical structures in program code. Symbolic computing is bringing algorithms from mathematical analysis into the...

  17. TIES for Dummies 3rd Edition (Technology Identification, Evaluation, and Selection) Basic how to's to implement the TIES method

    Science.gov (United States)

    Kirby, Michelle R.

    2002-01-01

    The TIES method is a forecasting environment whereby the decision-maker has the ability to easily assess and trade-off the impact of various technologies without sophisticated and time-consuming mathematical formulations. TIES provides a methodical approach where technically feasible alternatives can be identified with accuracy and speed to reduce design cycle time, and subsequently, life cycle costs, and was achieved through the use of various probabilistic methods, such as Response Surface Methodology and Monte Carlo Simulations. Furthermore, structured and systematic techniques are utilized from other fields to identify possible concepts and evaluation criteria by which comparisons can be made. This objective is achieved by employing the use of Morphological Matrices and Multi-Attribute Decision Making techniques. Through the execution of each step, a family of design alternatives for a given set of customer requirements can be identified and assessed subjectively or objectively. This methodology allows for more information (knowledge) to be brought into the earlier phases of the design process and will have direct implications on the affordability of the system. The increased knowledge allows for optimum allocation of company resources and quantitative justification for program decisions. Finally, the TIES method provided novel results and quantitative justification to facilitate decision making in the early stages of design so as to produce affordable and quality products.

  18. Characterization of ash pond ashes from 3rd thermal power plant by SEM/EDX and XRD methods

    OpenAIRE

    A Minjigmaa; Ts Zolzaya; E Bayanjargal; B Davaabal; J Temuujin

    2014-01-01

      Coal combustion by products from ash pond of 3rdthermal power plant of Ulaanbaatar city have been collected in 2010 and 2013 years. The ash samples have been characterized by XRD, XRF and SEM-EDX methods in order to evaluate their chemical and mineralogical composition changes with disposed times. The mineralogical composition of ash varies with time though the chemical composition of the ashes were close each other. Possibly, inefficient operating condition of the TPS shows influence on th...

  19. Characterization of ash pond ashes from 3rd thermal power plant by SEM/EDX and XRD methods

    Directory of Open Access Journals (Sweden)

    A Minjigmaa

    2014-10-01

    Full Text Available   Coal combustion by products from ash pond of 3rdthermal power plant of Ulaanbaatar city have been collected in 2010 and 2013 years. The ash samples have been characterized by XRD, XRF and SEM-EDX methods in order to evaluate their chemical and mineralogical composition changes with disposed times. The mineralogical composition of ash varies with time though the chemical composition of the ashes were close each other. Possibly, inefficient operating condition of the TPS shows influence on the mineralogical composition.DOI: http://dx.doi.org/10.5564/mjc.v14i0.201Mongolian Journal of Chemistry 14 (40, 2013, p61-65

  20. The epiphyseal union of the medial clavicle determined by CT - an axillary method in age identification during adolescence and 3rd decade of life?

    International Nuclear Information System (INIS)

    Kreitner, K.F.; Schweden, F.; Schild, H.H.; Riepert, T.; Nafe, B.

    1997-01-01

    Purpose: To establish a reference population for the stages of epiphyseal union of the medical clavicle determined by CT. Material and methods: Retrospectively, the thoracic CTs of patients under 30 years of age were reevaluated. Basic conditions were the lack of a bone development disorder and a sufficient assessment of the medial clavicle in a bone window setting. The stages of epiphyseal union were categorized as follows: Stage 1 refers to nonunion without ossification of the epiphysis, Stage 2 to nonunion with a separate and ossified epiphysis, Stage 3 to partial, and Stage 4 to complete union. Results: Up to now, 279 individuals coul be included in the study. Stage 1 was observed till age 16, Stage 2 occurred from ages 13 through 22, Stage 3 was found from ages 16 through 26. Stage 4 was first noted at age 22, and in 100% of the sample at age 27. Conclusions: CT is well suitable to determine the stages of epiphyseal union of the medial clavicle. It may become a generally accepted method of age identification during adolescence and the 3rd decade of life. The presented data serve as a reference population at least for white Europeans. (orig.) [de

  1. 3rd MeTrApp Conference

    CERN Document Server

    Lovasz, Erwin-Christian; Hüsing, Mathias

    2015-01-01

    This volume deals with topics such as mechanism and machine design, biomechanics and medical engineering, gears, mechanical transmissions, mechatronics, computational and experimental methods, dynamics of mechanisms and machines, micromechanisms and microactuators, and history of mechanisms and transmissions. Following MeTrApp 2011 and 2013, held under the auspices of the IFToMM, these proceedings of the 3rd Conference on Mechanisms, Transmissions and Applications offer a platform for original research presentations for researchers, scientists, industry experts and students in the fields of mechanisms and transmissions with special emphasis on industrial applications in order to stimulate the exchange of new and innovative ideas.

  2. Lecture Notes in Statistics. 3rd Semester

    DEFF Research Database (Denmark)

    The lecture note is prepared to meet the requirements for the 3rd semester course in statistics at the Aarhus School of Business. It focuses on multiple regression models, analysis of variance, and log-linear models.......The lecture note is prepared to meet the requirements for the 3rd semester course in statistics at the Aarhus School of Business. It focuses on multiple regression models, analysis of variance, and log-linear models....

  3. 3D photo mosaicing of Tagiri shallow vent field by an autonomous underwater vehicle (3rd report) - Mosaicing method based on navigation data and visual features -

    Science.gov (United States)

    Maki, Toshihiro; Ura, Tamaki; Singh, Hanumant; Sakamaki, Takashi

    Large-area seafloor imaging will bring significant benefits to various fields such as academics, resource survey, marine development, security, and search-and-rescue. The authors have proposed a navigation method of an autonomous underwater vehicle for seafloor imaging, and verified its performance through mapping tubeworm colonies with the area of 3,000 square meters using the AUV Tri-Dog 1 at Tagiri vent field, Kagoshima bay in Japan (Maki et al., 2008, 2009). This paper proposes a post-processing method to build a natural photo mosaic from a number of pictures taken by an underwater platform. The method firstly removes lens distortion, invariances of color and lighting from each image, and then ortho-rectification is performed based on camera pose and seafloor estimated by navigation data. The image alignment is based on both navigation data and visual characteristics, implemented as an expansion of the image based method (Pizarro et al., 2003). Using the two types of information realizes an image alignment that is consistent both globally and locally, as well as making the method applicable to data sets with little visual keys. The method was evaluated using a data set obtained by the AUV Tri-Dog 1 at the vent field in Sep. 2009. A seamless, uniformly illuminated photo mosaic covering the area of around 500 square meters was created from 391 pictures, which covers unique features of the field such as bacteria mats and tubeworm colonies.

  4. Interlaboratory Validation of the Leaching Environmental Assessment Framework (LEAF) Method 1314 and Method 1315

    Science.gov (United States)

    This report summarizes the results of an interlaboratory study conducted to generate precision estimates for two leaching methods under review by the U.S. EPA’s OSWER for inclusion into the EPA’s SW-846: Method 1314: Liquid-Solid Partitioning as a Function of Liquid...

  5. 3rd GAMM/IFIP-Workshop on “Stochastic Optimization: Numerical Methods and Technical Applications” held at the Federal Armed Forces University Munich

    CERN Document Server

    Kall, Peter

    1998-01-01

    Optimization problems arising in practice usually contain several random parameters. Hence, in order to obtain optimal solutions being robust with respect to random parameter variations, the mostly available statistical information about the random parameters should be considered already at the planning phase. The original problem with random parameters must be replaced by an appropriate deterministic substitute problem, and efficient numerical solution or approximation techniques have to be developed for those problems. This proceedings volume contains a selection of papers on modelling techniques, approximation methods, numerical solution procedures for stochastic optimization problems and applications to the reliability-based optimization of concrete technical or economic systems.

  6. 3rd Semester and Master's Thesis Ideas

    DEFF Research Database (Denmark)

    Clausen, Johan

    The following pages contain a list of project ideas proposed by the scientific staff at the department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalouge may form the basis for long and short candidate projects as well as regular 3rd...

  7. The 3rd power unit roofing decontamination

    International Nuclear Information System (INIS)

    Samojlenko, Yu.N.; Golubev, V.V.

    1989-01-01

    The most features of the 3rd power unit (PU) roofing decontamination are described: 1) the most active materials were thrown into the 4th PU ruins before the Ukrytie construction completion; 2) the decontamination was fulfilled using remote-controlled mechanisms and manual devices (the main part). 6 figs.; 1 tab

  8. 3rd International Conference on Transcriptomics

    OpenAIRE

    John A Daniel

    2017-01-01

    Conference Series has been instrumental in conducting international Biochemistry meetings for seven years, and very excited to expand Europe, America and Asia Pacific continents. Previous meetings were held in major cities like Philadelphia, Orlando with success the meetings again scheduled in three continents. 3rd International Conference on Transcriptomics to be held during October 30 - November 01, 2017 at Bangkok, Thailand The Global Transcriptomics business sector to develop at a C...

  9. 3rd annual biomass energy systems conference

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    The main objectives of the 3rd Annual Biomass Energy Systems Conference were (1) to review the latest research findings in the clean fuels from biomass field, (2) to summarize the present engineering and economic status of Biomass Energy Systems, (3) to encourage interaction and information exchange among people working or interested in the field, and (4) to identify and discuss existing problems relating to ongoing research and explore opportunities for future research. Abstracts for each paper presented were edited separately. (DC)

  10. 3rd International Conference on Multimedia Technology

    CERN Document Server

    Yang, Jian; Jiao, Feng

    2014-01-01

    Proceedings of the 3rd International Conference on Multimedia Technology (ICMT2013) focuses on both the theory and applications of multimedia technology. The recent advances, new research findings and applications in the fields of theoretical, experimental and applied image & video processing and multimedia technology presented at the conference are brought together in this book. It will serve as a valuable reference for scientists and engineers working in multimedia and related fields. Prof. Aly A. Farag works at the University of Louisville, USA; Prof. Jian Yang works at Tsinghua University, China; Dr. Feng Jiao works at Nanjing University of Information Science & Technology, China.

  11. Background information for the Leaching environmental Assessment Framework (LEAF) test methods

    Science.gov (United States)

    The U.S. Environmental Protection Agency Office of Resource Conservation and Recovery has initiated the review and validation process for four leaching tests under consideration for inclusion into SW-846: Method 1313 "Liquid-Solid Partitioning as a Function of Extract pH for Co...

  12. 3rd International Conference Nanotechnology and Nanomaterials

    CERN Document Server

    Yatsenko, Leonid

    2016-01-01

    This book presents some of the latest achievements in nanotechnology and nanomaterials from leading researchers in Ukraine, Europe, and beyond. It features contributions from participants in the 3rd International Science and Practice Conference Nanotechnology and Nanomaterials (NANO2015) held in Lviv, Ukraine on August 26-30, 2015. The International Conference was organized jointly by the Institute of Physics of the National Academy of Sciences of Ukraine, University of Tartu (Estonia), Ivan Franko National University of Lviv (Ukraine), University of Turin (Italy), Pierre and Marie Curie University (France), and European Profiles A.E. (Greece). Internationally recognized experts from a wide range of universities and research institutions share their knowledge and key results on topics ranging from nanooptics, nanoplasmonics, and interface studies to energy storage and biomedical applications. Presents cutting-edge advances in nanocomposites and carbon and silicon-based nanomaterials for a wide range of engine...

  13. BACODINE/3rd Interplanetary Network burst localization

    International Nuclear Information System (INIS)

    Hurley, K.; Barthelmy, S.; Butterworth, P.; Cline, T.; Sommer, M.; Boer, M.; Niel, M.; Kouveliotou, C.; Fishman, G.; Meegan, C.

    1996-01-01

    Even with only two widely separated spacecraft (Ulysses and GRO), 3rd Interplanetary Network (IPN) localizations can reduce the areas of BATSE error circles by two orders of magnitude. Therefore it is useful to disseminate them as quickly as possible following BATSE bursts. We have implemented a system which transmits the light curves of BACODINE/BATSE bursts directly by e-mail to UC Berkeley immediately after detection. An automatic e-mail parser at Berkeley watches for these notices, determines the Ulysses crossing time window, and initiates a search for the burst data on the JPL computer as they are received. In ideal cases, it is possible to retrieve the Ulysses data within a few hours of a burst, generate an annulus of arrival directions, and e-mail it out to the astronomical community by local nightfall. Human operators remain in this loop, but we are developing a fully automated routine which should remove them, at least for intense events, and reduce turn-around times to an absolute minimum. We explain the current operations, the data types used, and the speed/accuracy tradeoffs

  14. 3rd Computer Science On-line Conference

    CERN Document Server

    Senkerik, Roman; Oplatkova, Zuzana; Silhavy, Petr; Prokopova, Zdenka

    2014-01-01

    This book is based on the research papers presented in the 3rd Computer Science On-line Conference 2014 (CSOC 2014).   The conference is intended to provide an international forum for discussions on the latest high-quality research results in all areas related to Computer Science. The topics addressed are the theoretical aspects and applications of Artificial Intelligences, Computer Science, Informatics and Software Engineering.   The authors provide new approaches and methods to real-world problems, and in particular, exploratory research that describes novel approaches in their field. Particular emphasis is laid on modern trends in selected fields of interest. New algorithms or methods in a variety of fields are also presented.   This book is divided into three sections and covers topics including Artificial Intelligence, Computer Science and Software Engineering. Each section consists of new theoretical contributions and applications which can be used for the further development of knowledge of everybod...

  15. Developing Product Lines with 3rd-party components

    NARCIS (Netherlands)

    De Jonge, M.

    2007-01-01

    The trends toward product line development and toward adopting more 3rd-party software are hard to combine. The reason is that productlines demand fine control over the software (e.g., for diversity management), while 3rd-party software (almost by definition) provides only little or no control. A

  16. 3rd Bayesian Young Statisticians Meeting

    CERN Document Server

    Lanzarone, Ettore; Villalobos, Isadora; Mattei, Alessandra

    2017-01-01

    This book is a selection of peer-reviewed contributions presented at the third Bayesian Young Statisticians Meeting, BAYSM 2016, Florence, Italy, June 19-21. The meeting provided a unique opportunity for young researchers, M.S. students, Ph.D. students, and postdocs dealing with Bayesian statistics to connect with the Bayesian community at large, to exchange ideas, and to network with others working in the same field. The contributions develop and apply Bayesian methods in a variety of fields, ranging from the traditional (e.g., biostatistics and reliability) to the most innovative ones (e.g., big data and networks).

  17. 3rd international conference, LDIC 2012

    CERN Document Server

    Scholz-Reiter, Bernd; Thoben, Klaus-Dieter

    2013-01-01

    The volume comprises the proceedings of the third International Conference on Dynamics in Logistics LDIC 2012. The scope of the conference targeted the identification, analysis, and description of the dynamics of logistic processes and networks. The spectrum ranged from the modeling and planning of processes and innovative methods like autonomous control and knowledge management to the new technologies provided by radio frequency identification, mobile communication, and networking. The growing dynamics in the area of logistics poses completely new challenges: Logistic processes and networks must rapidly and flexibly adapt to continuously changing conditions. LDIC 2012 provided a venue for researchers from academia and industry interested in the technical advances in dynamics in logistics. The conference addressed research in logistics from a wide range of fields, e.g. engineering, computer science and operations research. The volume consists of two invited papers and of 49 contributed papers divided into var...

  18. Method and apparatus for controlling gas evolution from chemical reactions

    Science.gov (United States)

    Skorpik, James R.; Dodson, Michael G.

    1999-01-01

    The present invention is directed toward monitoring a thermally driven gas evolving chemical reaction with an acoustic apparatus. Signals from the acoustic apparatus are used to control a heater to prevent a run-away condition. A digestion module in combination with a robotic arm further automate physical handling of sample material reaction vessels. The invention is especially useful for carrying out sample procedures defined in EPA Methods SW-846.

  19. 77 FR 56558 - Hazardous Waste Management System; Identification and Listing of Hazardous Waste; Final Rule

    Science.gov (United States)

    2012-09-13

    ... metals (SW-846 Method 6010B except for mercury--SW-846 Method 7471A and selenium--SW-846 Method 7010...- 846 Method 8270C) and metals (SW-846 Method 6010B except for mercury-- SW-846 Method 7470 and selenium...; Chromium--5.0; Lead--5.0; Mercury--0.2; and, Nickel--32.4. 2. Waste Handling and Holding: (A) IBM must...

  20. 3rd CEAS Specialist Conference on Guidance, Navigation and Control

    CERN Document Server

    Drouin, Antoine; Roos, Clément

    2015-01-01

    The two first CEAS (Council of European Aerospace Societies) Specialist Conferences on Guidance, Navigation and Control (CEAS EuroGNC) were held in Munich, Germany in 2011 and in Delft, The Netherlands in 2013. ONERA The French Aerospace Lab, ISAE (Institut Supérieur de l’Aéronautique et de l’Espace) and ENAC (Ecole Nationale de l’Aviation Civile) accepted the challenge of jointly organizing the 3rd edition. The conference aims at promoting new advances in aerospace GNC theory and technologies for enhancing safety, survivability, efficiency, performance, autonomy and intelligence of aerospace systems. It represents a unique forum for communication and information exchange between specialists in the fields of GNC systems design and operation, including air traffic management. This book contains the forty best papers and gives an interesting snapshot of the latest advances over the following topics: l  Control theory, analysis, and design l  Novel navigation, estimation, and tracking methods l  Aircr...

  1. The Role of Training and Promotion to Increase The 3rd Party Funds Indonesian Islamic Banking

    Directory of Open Access Journals (Sweden)

    Rahmat Hidayat

    2014-03-01

    Full Text Available Objective – This study aims to determine whether the role of training is much larger than the promotion in raising third-party funds in Islamic banks in Indonesia given the cost of the training is spent is greater than the cost of promotion. This study empirically examines the relationship and impact of training and promotion to raise funds for a 3rd party in Indonesia Islamic banks.Methods – This study uses secondary data Islamic commercial banks in the form of panel (time-series and cross-section of Bank Indonesia data from 2010 until 2012. There are two independent variables training cost (X1 and promotion cost (X2 and one dependent variable is 3rd-party funds (Y. The analysis technique used path analysis to examine the role of training and the promotion of financial performance (The 3rd Party Funds.Result – Simultaneously, training and promotion gives an effect by 52%, and partially or individual training gives an insignificant negative effect, while the promotion has a significant positive impact on financial performance (financial-party funds on Islamic banking.Conclusion – The role of promotion is higher in raising The 3rd Party Funds than training. Keywords : Cost, Training, Promotion, The 3rd Party Funds 

  2. Impressions from the 3rd Nordcode Seminar & Workshop

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Boelskifte, Per; Hansen, Claus Thorp

    2005-01-01

    This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar.......This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar....

  3. 3rd Semester and Master’s Thesis Ideas 2011

    DEFF Research Database (Denmark)

    The report contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester...

  4. 3rd Semester and Master’s Thesis Ideas 2013

    DEFF Research Database (Denmark)

    The following pages contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short master projects as well as regular 3rd...

  5. 3rd Semester and Master’s Thesis Ideas 2012

    DEFF Research Database (Denmark)

    Clausen, Johan

    The report contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester...

  6. Magnet Free Generators - 3rd Generation Wind Turbine Generators

    DEFF Research Database (Denmark)

    Jensen, Bogi Bech; Mijatovic, Nenad; Henriksen, Matthew Lee

    2013-01-01

    This paper presents an introduction to superconducting wind turbine generators, which are often referred to as 3rd generation wind turbine generators. Advantages and challenges of superconducting generators are presented with particular focus on possible weight and efficiency improvements. A comp...

  7. 3rd Session of the Sant Cugat Forum on Astrophysics

    CERN Document Server

    Gravitational wave astrophysics

    2015-01-01

    This book offers review chapters written by invited speakers of the 3rd Session of the Sant Cugat Forum on Astrophysics — Gravitational Waves Astrophysics. All chapters have been peer reviewed. The book goes beyond normal conference proceedings in that it provides a wide panorama of the astrophysics of gravitational waves and serves as a reference work for researchers in the field.

  8. Proceedings of the 3rd Symposium on Laser Spectroscopy

    International Nuclear Information System (INIS)

    1995-11-01

    This proceedings contains articles of the 3rd Symposium on Laser Spectroscopy. It was held on Nov 10-11, 1995 in Taejeon, Korea. The main topics are as follows: Laser Isotope, Laser Spectroscopy, Laser Fusion, Laser Applications and so on. (Yi, J. H.)

  9. 3rd International Conference on Ecosystem Assessment Management

    CERN Document Server

    Ma, Sheng-Quan; Cao, Hu-hua; Ecosystem Assessment and Fuzzy Systems Management

    2014-01-01

    “Ecosystem Assessment and Fuzzy Systems Management” is the edited outcome of the 3rd International Conference on Ecosystem Assessment Management (ICEAM) and the Workshop on the Construction of an Early Warning Platform for Eco-tourism (WCEWPE) in Hainan on May 5-12, 2013, Haikou, China. The 3rd ICEAM and the WCEWPE, built on the success of previous conferences, are major Symposiums for scientists, engineers and logistic management researchers presenting their the latest achievements, developments and applications in all areas of Ecosystem Assessment Management, Early Warning Platform for Eco-tourism and fuzziology. It aims to strengthen relations between industry research laboratories and universities, and to create a primary symposium for world scientists. The book, containing 47 papers, is divided into five parts: “Ecosystem Assessment, Management and Information”; “Intelligent Algorithm, Fuzzy Optimization and Engineering Application”; “Spatial Data Analysis and Intelligent Information Proces...

  10. 3rd International Multidisciplinary Microscopy and Microanalysis Congress

    CERN Document Server

    Oral, Zehra

    2017-01-01

    The 3rd International Multidisciplinary Microscopy Congress (InterM2015), held from 19 to 23 October 2015, focused on the latest developments concerning applications of microscopy in the biological, physical and chemical sciences at all dimensional scales, advances in instrumentation, techniques in and educational materials on microscopy. These proceedings gather 17 peer-reviewed technical papers submitted by leading academic and research institutions from nine countries and representing some of the most cutting-edge research available.

  11. 3rd International Conference on Computer & Communication Technologies

    CERN Document Server

    Bhateja, Vikrant; Raju, K; Janakiramaiah, B

    2017-01-01

    The book is a compilation of high-quality scientific papers presented at the 3rd International Conference on Computer & Communication Technologies (IC3T 2016). The individual papers address cutting-edge technologies and applications of soft computing, artificial intelligence and communication. In addition, a variety of further topics are discussed, which include data mining, machine intelligence, fuzzy computing, sensor networks, signal and image processing, human-computer interaction, web intelligence, etc. As such, it offers readers a valuable and unique resource.

  12. 3rd Interplanetary Network Gamma-Ray Burst Website

    Science.gov (United States)

    Hurley, Kevin

    1998-05-01

    We announce the opening of the 3rd Interplanetary Network web site at http://ssl.berkeley.edu/ipn3/index.html This site presently has four parts: 1. A bibliography of over 3000 publications on gamma-ray bursts, 2. IPN data on all bursts triangulated up to February 1998, 3. A master list showing which spacecraft observed which bursts, 4. Preliminary IPN data on the latest bursts observed.

  13. PREFACE: 3rd International Symposium ''Optics and its Applications''

    Science.gov (United States)

    Calvo, M. L.; Dolganova, I. N.; Gevorgyan, N.; Guzman, A.; Papoyan, A.; Sarkisyan, H.; Yurchenko, S.

    2016-01-01

    The SPIE.FOCUS Armenia: 3rd International Symposium ''Optics and its Applications'' (OPTICS-2015) http://rau.am/optics2015/ was held in Yerevan, Armenia, in the period October 1 - 5, 2015. The symposium was organized by the International Society for Optics and Photonics (SPIE), the Armenian SPIE student chapter with collaboration of the Armenian TC of ICO, the Russian-Armenian University (RAU), the Institute for Physical Research of National Academy of Sciences of Armenia (IPR of NAS), the Greek-Armenian industrial company LT-PYRKAL, and the Yerevan State University (YSU). The Symposium was co-organized by the SPIE & OSA student chapters of BMSTU, the Armenian OSA student chapter, and the SPIE student chapters of Lund University and Wroclaw University of Technology. The symposium OPTICS-2015 was dedicated to the International Year of Light and Light-Based Technologies. OPTICS-2015 was devoted to modern topics and optical technologies such as: optical properties of nanostructures, silicon photonics, quantum optics, singular optics & its applications, laser spectroscopy, strong field optics, biomedical optics, nonlinear & ultrafast optics, photonics & fiber optics, and mathematical methods in optics. OPTICS-2015 was attended by 100 scientists and students representing 17 countries: Armenia, China, Czech Republic, France, Georgia, Germany, India, Iran, Italy, Latvia, Mexico, Poland, Russia, Saudi Arabia, Sweden, Ukraine, and USA. Such a broad international community confirmed the important mission of science to be a uniting force between different countries, religions, and nations. We hope that OPTICS-2015 inspired and motivated students and young scientists to work in optics and in science in general. The present volume of Journal of Physics: Conference Series includes proceedings of the symposium covering various aspects of modern problems in optics. We are grateful to all people who were involved in the organization process. We gratefully acknowledge support from

  14. 3rd International Conference on Intelligent Technologies and Engineering Systems

    CERN Document Server

    2016-01-01

    This book includes the original, peer reviewed research from the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014), held in December, 2014 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: Automation and robotics, fiber optics and laser technologies, network and communication systems, micro and nano technologies, and solar and power systems. This book also Explores emerging technologies and their application in a broad range of engineering disciplines Examines fiber optics and laser technologies Covers biomedical, electrical, industrial, and mechanical systems Discusses multimedia systems and applications, computer vision and image & video signal processing.

  15. 3rd Conference on Ignition Systems for Gasoline Engines

    CERN Document Server

    Sens, Marc

    2017-01-01

    The volume includes selected and reviewed papers from the 3rd Conference on Ignition Systems for Gasoline Engines in Berlin in November 2016. Experts from industry and universities discuss in their papers the challenges to ignition systems in providing reliable, precise ignition in the light of a wide spread in mixture quality, high exhaust gas recirculation rates and high cylinder pressures. Classic spark plug ignition as well as alternative ignition systems are assessed, the ignition system being one of the key technologies to further optimizing the gasoline engine.

  16. The 3rd Sino-Japan nuclear medicine conference

    International Nuclear Information System (INIS)

    1999-01-01

    The 3rd Sino-Japan Nuclear Medicine Conference was hold on May 11-13, 1999 in Xi'an of China by Chinese Society of Nuclear Medicine, Japanese Society of Nuclear Medicine, Chinese Medicine Association and Japan-China Medicine Association. 62 articles were published in the proceeding of the conference. The contents of the articles include development and application of the radioisotopes (such as Tc-99, I-125, I-131, F-18, In-111, Tl-201, Ga-67, Sm-153, Re-188) and its radiopharmaceuticals, but application also include radiotherapy and diagnosis in the oncology and pathology by SPECT and PET

  17. Proceedings of the 3rd Symposium on Engineering Sciences

    International Nuclear Information System (INIS)

    Ahmed, J.; Rizvi, S.Z.H.; Ahmad, R.; Saleem, M.

    2010-01-01

    The 3rd symposium on engineering sciences was held from March 10-12, 2010 in Lahore, Pakistan. More than twenty academic institutions and six industries participated in this conference. The foreign and Pakistani experts delivered their keynotes talk, contributor lectures and poster presentation on the conference topics. In three days of the symposium, Fifty four papers presented on different topics of Engineering Sciences including chemical engineering, energy engineering, metallurgy engineering, material engineering and electrical engineering. This symposium provided an ideal opportunity for exchange of information amongst scientists, engineers and researchers from all over Pakistan and other countries of the world. (A.B)

  18. 3rd International Conference on Movement, Health and Exercise 2016

    CERN Document Server

    Cheong, Jadeera; Usman, Juliana; Ahmad, Mohd; Razman, Rizal; Selvanayagam, Victor

    2017-01-01

    This volume presents the proceedings of the 3rd International Conference on Movement, Health and Exercise 2016 (MoHE2016). The conference was jointly organized by the Biomedical Engineering Department and Sports Centre, University of Malaya. It was held in Malacca, from 28-30 September 2016. MoHE 2016 provided a good opportunity for speakers and participants to actively discuss about recent developments in a wide range of topics in the area of sports and exercise science. In total, 83 presenters and 140 participants took part in this successful conference. .

  19. 3rd International Conference on X-ray Technique

    Science.gov (United States)

    Potrakhov, N. N.; Gryaznov, A. Yu; Lisenkov, A. A.; Kostrin, D. K.

    2017-02-01

    In this preface a brief history, modern aspects and future tendencies in development of the X-ray technique as seen from the 3rd International Conference on X-ray Technique that was held on 24-25 November 2016 in Saint Petersburg, Russia are described On 24-25 November 2016 in Saint Petersburg on the basis of Saint Petersburg State Electrotechnical University “LETI” n. a. V. I. Ulyanov (Lenin) was held the 3rd International Conference on X-ray Technique. The tradition to hold a similar conference in our country was laid in Soviet times. The last of them, the All-Union Conference on the Prospects of X-ray Tubes and Equipment was organized and held more than a quarter century ago - on 21-23 November 1999, at the initiative and under the leadership of the chief engineer of the Leningrad association of electronic industry “Svetlana” Borovsky Alexander Ivanovich and the chief of special design bureau of X-ray devices of “Svetlana” Shchukin Gennady Anatolievich. The most active part in the organization and work of the conference played members of the department of X-ray and electron beam instruments of Leningrad Electrotechnical Institute “LETI” (the former name of Saint Petersburg State Electrotechnical University “LETI”), represented by head of the department professor Ivanov Stanislav Alekseevich.

  20. Microstructure Modeling of 3rd Generation Disk Alloys

    Science.gov (United States)

    Jou, Herng-Jeng

    2010-01-01

    The objective of this program is to model, validate, and predict the precipitation microstructure evolution, using PrecipiCalc (QuesTek Innovations LLC) software, for 3rd generation Ni-based gas turbine disc superalloys during processing and service, with a set of logical and consistent experiments and characterizations. Furthermore, within this program, the originally research-oriented microstructure simulation tool will be further improved and implemented to be a useful and user-friendly engineering tool. In this report, the key accomplishment achieved during the second year (2008) of the program is summarized. The activities of this year include final selection of multicomponent thermodynamics and mobility databases, precipitate surface energy determination from nucleation experiment, multiscale comparison of predicted versus measured intragrain precipitation microstructure in quench samples showing good agreement, isothermal coarsening experiment and interaction of grain boundary and intergrain precipitates, primary microstructure of subsolvus treatment, and finally the software implementation plan for the third year of the project. In the following year, the calibrated models and simulation tools will be validated against an independently developed experimental data set, with actual disc heat treatment process conditions. Furthermore, software integration and implementation will be developed to provide material engineers valuable information in order to optimize the processing of the 3rd generation gas turbine disc alloys.

  1. Evaluation of paracavernous cranial nerves (3rd to 6th) with CT

    International Nuclear Information System (INIS)

    Tsuha, Mitsuru; Okamura, Tomomi; Abiko, Seisho; Aoki, Hideo

    1984-01-01

    We have now used CT to evaluate the cavernous sinuses, especially the 3rd, 4th, 5th, and 6th cranial nerves. adjacent to them. Twenty cases, presumably all having sellar or parasellar lesions, were examined by means of thin-slice (2-4 mm) axial and coronal (including both direct and reconstructed methods) CT studies. Moreover, three blocks of the sellar region obtained from adult cadavers were examined beforehand by CT scan, and the courses of the respective paracavernous cranial nerves were confirmed by microsurgical dissection. As a result, the following conclusions were obtained. 1. It was valuable to perform a post-enhanced direct coronal study for the definite identification of the paracavernous cranial nerves (3rd to 6th cranial nerves). 2. Also valuable was a magnified CT film of the parasellar regions, which made the identification of the parasellar cranial nerves clearer. 3. In the clinical cases showing a normal shape of the cavernous sinuses on CT, each cranial nerve was evaluated. In the axial studies (almost 10 to 15 degrees anterior to Reid's basal line), the frequencies of the identification of the 3rd, 5th, and 6th cranial nerves were 76%, 97% (as to the Gasserian ganglion), and 21% respectively. None of the 4th cranial nerve was visualized in the cases examined. On the other hand, the frequencies of the identification of the 3rd, 5th, and 6th cranial nerves were 83%, 86%, and 21% respectively in the direct coronal studies and 62%, 57%, and 4% in those of the reconstructed films. The visualization of each cranial nerve in the direct coronal study was better than when the reconstructed method was used. Finally, a schematic presentation of the cranial nerves adjacent to the cavernous sinuses was made in the axial and coronal projections. (J.P.N.)

  2. 3rd Workshop on Branching Processes and their Applications

    CERN Document Server

    González, Miguel; Gutiérrez, Cristina; Martínez, Rodrigo; Minuesa, Carmen; Molina, Manuel; Mota, Manuel; Ramos, Alfonso; WBPA15

    2016-01-01

    This volume gathers papers originally presented at the 3rd Workshop on Branching Processes and their Applications (WBPA15), which was held from 7 to 10 April 2015 in Badajoz, Spain (http://branching.unex.es/wbpa15/index.htm). The papers address a broad range of theoretical and practical aspects of branching process theory. Further, they amply demonstrate that the theoretical research in this area remains vital and topical, as well as the relevance of branching concepts in the development of theoretical approaches to solving new problems in applied fields such as Epidemiology, Biology, Genetics, and, of course, Population Dynamics. The topics covered can broadly be classified into the following areas: 1. Coalescent Branching Processes 2. Branching Random Walks 3. Population Growth Models in Varying and Random Environments 4. Size/Density/Resource-Dependent Branching Models 5. Age-Dependent Branching Models 6. Special Branching Models 7. Applications in Epidemiology 8. Applications in Biology and Genetics Offer...

  3. EMCS upgrade to 3rd generation not an easy task

    International Nuclear Information System (INIS)

    Neal, C.E.

    1993-01-01

    The Energy Management Control System (EMCS) for Sheppard AFB was started in 1976 with contract completion in 1981. With other additions the system grew to over 8,000 points with 350 Field Panels. Over 35 miles of coax for data transmission were installed. In 1987 an effort was started to move to the open-quotes newclose quotes generation for the central system. At the same time coax replacement with fiber optics was started. This paper discusses the problems encountered which caused a change in plans and a move to 3rd generation system. There are many things to consider when attempting an upgrade. Conflicting information will make the task that much harder. This paper will attempt to show some of the problems encountered and lessons learned to help others avoid such difficulties

  4. Report from the 3rd Workshop on Extremely Large Databases

    Directory of Open Access Journals (Sweden)

    Jacek Becla

    2010-02-01

    Full Text Available Academic and industrial users are increasingly facing the challenge of petabytes of data, but managing and analyzing such large data sets still remains a daunting task. Both the database and the map/reduce communities worldwide are working on addressing these issues. The 3rdExtremely Large Databases workshop was organized to examine the needs of scientific communities beginning to face these issues, to reach out to European communities working on extremely large scale data challenges, and to brainstorm possible solutions. The science benchmark that emerged from the 2nd workshop in this series was also debated. This paper is the final report of the discussions and activities at this workshop.

  5. The DAΦNE 3RD harmonic cavity

    International Nuclear Information System (INIS)

    Alesini, D.; Boni, R.; Clozza, A.; Gallo, A.; Guiducci, S.; Marcellini, F.; Migliorati, M.; Palumbo, L.; Pellegrino, L.; Sgamma, F.; Zobov, M.

    2001-01-01

    The installation of a passive 3rd harmonic cavity in both the e + and e - rings of the Frascati Φ-factory DAΦNE has been decided in order to improve the Touschek lifetime by increasing the bunch length. The implications of the RF harmonic system on the beam dynamics, in particular those related to the gap in the bunch filling pattern, have been carefully studied by means of analytical and numerical tools. A single-cell cavity incorporating a ferrite ring for the HOM damping has been designed through the extensive use of MAFIA and HFSS simulation codes. One cavity prototype has been built and extensively bench tested, while the fabrication of the two final cavities is almost completed. A description of the design and construction activities, and a set of experimental measurements are reported in this paper

  6. 3rd Symposium on Space Optical Instruments and Applications

    CERN Document Server

    Zhang, Guangjun

    2017-01-01

    This volume contains selected and expanded contributions presented at the 3rd Symposium on Space Optical Instruments and Applications in Beijing, China June 28 – 29, 2016. This conference series is organised by the Sino-Holland Space Optical Instruments Laboratory, a cooperation platform between China and the Netherlands. The symposium focused on key technological problems of optical instruments and their applications in a space context. It covered the latest developments, experiments and results regarding theory, instrumentation and applications in space optics. The book is split across five topical sections. The first section covers space optical remote sensing system design, the second advanced optical system design, the third remote sensor calibration and measurement. Remote sensing data processing and information extraction is then presented, followed by a final section on remote sensing data applications. .

  7. 3rd International Conference on Computational Mathematics and Computational Geometry

    CERN Document Server

    Ravindran, Anton

    2016-01-01

    This volume presents original research contributed to the 3rd Annual International Conference on Computational Mathematics and Computational Geometry (CMCGS 2014), organized and administered by Global Science and Technology Forum (GSTF). Computational Mathematics and Computational Geometry are closely related subjects, but are often studied by separate communities and published in different venues. This volume is unique in its combination of these topics. After the conference, which took place in Singapore, selected contributions chosen for this volume and peer-reviewed. The section on Computational Mathematics contains papers that are concerned with developing new and efficient numerical algorithms for mathematical sciences or scientific computing. They also cover analysis of such algorithms to assess accuracy and reliability. The parts of this project that are related to Computational Geometry aim to develop effective and efficient algorithms for geometrical applications such as representation and computati...

  8. 3rd International Workshop on Turbulent Spray Combustion

    CERN Document Server

    Gutheil, Eva

    2014-01-01

    This book reflects the results of the 2nd and 3rd International Workshops on Turbulent Spray Combustion. The focus is on progress in experiments and numerical simulations for two-phase flows, with emphasis on spray combustion. Knowledge of the dominant phenomena and their interactions allows development of predictive models and their use in combustor and gas turbine design. Experts and young researchers present the state-of-the-art results, report on the latest developments and exchange ideas in the areas of experiments, modelling and simulation of reactive multiphase flows. The first chapter reflects on flame structure, auto-ignition and atomization with reference to well-characterized burners, to be implemented by modellers with relative ease. The second chapter presents an overview of first simulation results on target test cases, developed at the occasion of the 1st International Workshop on Turbulent Spray Combustion. In the third chapter, evaporation rate modelling aspects are covered, while the fourth ...

  9. 3rd International Symposium for Intelligent Transportation and Smart City

    CERN Document Server

    Xie, Xiongyao; Sun, Jian; Ma, Limin; Chen, Yinong; ITASC

    2017-01-01

    This book presents research advances in intelligent transportation and smart cities in detail, mainly focusing on green traffic and urban utility tunnels, presented at the 3rd International Symposium for Intelligent Transportation and Smart City (ITASC) held at Tongji University, Shanghai, on May 19–20, 2017. It discusses a number of hot topics, such as the 2BMW system (Bus, Bike, Metro and Walking), transportation safety and environmental protection, urban utility design and application, as well as the application of BIM (Building Information Modeling) in city design. By connecting the theory and applications of intelligent transportation in smart cities, it enhances traffic efficiency and quality. The book gathers numerous selected papers and lectures, including contributions from respected scholars and the latest engineering advances, to provide guidance to researchers in the field of transportation and urban planning at universities and in related industries. The first conference in the ITASC series sta...

  10. 3rd International Conference on Nanotechnologies and Biomedical Engineering

    CERN Document Server

    Tiginyanu, Ion

    2016-01-01

    This volume presents the proceedings of the 3rd International Conference on Nanotechnologies and Biomedical Engineering which was held on September 23-26, 2015 in Chisinau, Republic of Moldova. ICNBME-2015 continues the series of International Conferences in the field of nanotechnologies and biomedical engineering. It aims at bringing together scientists and engineers dealing with fundamental and applied research for reporting on the latest theoretical developments and applications involved in the fields. Topics include Nanotechnologies and nanomaterials Plasmonics and metamaterials Bio-micro/nano technologies Biomaterials Biosensors and sensors systems Biomedical instrumentation Biomedical signal processing Biomedical imaging and image processing Molecular, cellular and tissue engineering Clinical engineering, health technology management and assessment; Health informatics, e-health and telemedicine Biomedical engineering education Nuclear and radiation safety and security Innovations and technology transfer...

  11. 3rd International Conference on Robot Intelligence Technology and Applications

    CERN Document Server

    Yang, Weimin; Jo, Jun; Sincak, Peter; Myung, Hyun

    2015-01-01

    This book covers all aspects of robot intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 3rd International Conference on Robot Intelligence Technology and Applications (RiTA), held in Beijing, China, November 6 - 8, 2014. For better readability, this edition has the total 74 papers group...

  12. Organizational Knowledge Communication – a Nascent 3rd Order Disciplinarity

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2014-01-01

    There is an emerging tendency that the organizational communication functions of larger companies enter into a symbiotic relationship with the companies’ Knowledge Management function. A tendency this journal has labelled Organizational Knowledge Communication. This should come as no surprise...... to neither the researcher nor the practitioner; after all who can say where a corporation’s knowledge work ends and where its organizational communication begins – and vice versa? In this paper I will present a theoretical account of the three disciplinary trajectories that, in my view, have given rise...... to Organizational Knowledge Communication, i.e., organization studies, communication theory and Knowledge Management, respectively. In their synthesis the three trajectories form a disciplinary triple helix, a triple helix which, in turn, gives rise to Organizational Knowledge Communication as a novel, 3rd order...

  13. 3rd grade English language learners making sense of sound

    Science.gov (United States)

    Suarez, Enrique; Otero, Valerie

    2013-01-01

    Despite the extensive body of research that supports scientific inquiry and argumentation as cornerstones of physics learning, these strategies continue to be virtually absent in most classrooms, especially those that involve students who are learning English as a second language. This study presents results from an investigation of 3rd grade students' discourse about how length and tension affect the sound produced by a string. These students came from a variety of language backgrounds, and all were learning English as a second language. Our results demonstrate varying levels, and uses, of experiential, imaginative, and mechanistic reasoning strategies. Using specific examples from students' discourse, we will demonstrate some of the productive aspects of working within multiple language frameworks for making sense of physics. Conjectures will be made about how to utilize physics as a context for English Language Learners to further conceptual understanding, while developing their competence in the English language.

  14. Results from the UK 3rd generation programme: Albion

    Science.gov (United States)

    McEwen, R. K.; Axcell, C.; Knowles, P.; Hoade, K. P.; Wilson, M.; Dennis, P. N. J.; Backhouse, P.; Gordon, N. T.

    2008-10-01

    Following the development of 1st Generation systems in the 1970s, thermal imaging has been in service with the UK armed forces for over 25 years and has proven itself to be a battle winning technology. More recently the wider accessibility to similar technologies within opposing forces has reduced the military advantage provided by these 1st Generation systems and a clear requirement has been identified by the UK MOD for thermal imaging sensors providing increased detection, recognition and identification (DRI) ranges together with a simplified logistical deployment burden and reduced through-life costs. In late 2005, the UK MOD initiated a programme known as "Albion" to develop high performance 3rd Generation single waveband infrared detectors to meet this requirement. At the same time, under a separate programme supporting higher risk technology, a dual waveband infrared detector was also developed. The development phase of the Albion programme has now been completed and prototype detectors are now available and have been integrated into demonstration thermal imaging cameras. The Albion programme has now progressed into the second phase, incorporating both single and dual waveband devices, focussing on low rate initial production (LRIP) and qualification of the devices for military applications. All of the detectors have been fabricated using cadmium mercury telluride material (CMT), grown by metal organic vapour phase epitaxy (MOVPE) on low cost, gallium arsenide (GaAs) substrates and bump bonded to the silicon read out circuit (ROIC). This paper discusses the design features of the 3rd Generation detectors developed in the UK together with the results obtained from the prototype devices both in the laboratory and when integrated into field deployable thermal imaging cameras.

  15. 3rd International Conference on Computer Science, Applied Mathematics and Applications

    CERN Document Server

    Nguyen, Ngoc; Do, Tien

    2015-01-01

    This volume contains the extended versions of papers presented at the 3rd International Conference on Computer Science, Applied Mathematics and Applications (ICCSAMA 2015) held on 11-13 May, 2015 in Metz, France. The book contains 5 parts: 1. Mathematical programming and optimization: theory, methods and software, Operational research and decision making, Machine learning, data security, and bioinformatics, Knowledge information system, Software engineering. All chapters in the book discuss theoretical and algorithmic as well as practical issues connected with computation methods & optimization methods for knowledge engineering and machine learning techniques.  

  16. The 3rd colloquium on process simulation. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Jokilaakso, A. [ed.

    1996-12-31

    The presentations collected in this volume were presented at the 3rd Colloquium on Process Simulation held at Helsinki University of Technology, Espoo, Finland, June 12-14, 1996. In the more developed industrial nations, the processes for producing chemicals, energy, and materials encounter environmental concern and laws which challenge engineers to develop the processes towards more efficient, economical and safe operation. This necessitates more thorough understanding of the processes and phenomena involved. Formerly, the development of the processes was largely based on trial and error, whereas today, the development of computer performance together with the diversification of modelling software enables simulation of the processes. The increased capacity and possibilities for modelling the processes brought by the improved hardware and software, have generated a strong demand for more accurate mathematical descriptions of the processes. Especially, the coupling of computational fluid dynamics and chemical kinetics, combustion, and thermodynamics is of current interest in process oriented technology. This colloquium attempts to give examples of modelling efforts in operation in different universities, research institutes and companies. Furthermore, the aim of this colloquium is to offer an annual opportunity to the researchers to come together and discuss their common problems and the state of their investigations

  17. The 3rd colloquium on process simulation. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Jokilaakso, A [ed.

    1997-12-31

    The presentations collected in this volume were presented at the 3rd Colloquium on Process Simulation held at Helsinki University of Technology, Espoo, Finland, June 12-14, 1996. In the more developed industrial nations, the processes for producing chemicals, energy, and materials encounter environmental concern and laws which challenge engineers to develop the processes towards more efficient, economical and safe operation. This necessitates more thorough understanding of the processes and phenomena involved. Formerly, the development of the processes was largely based on trial and error, whereas today, the development of computer performance together with the diversification of modelling software enables simulation of the processes. The increased capacity and possibilities for modelling the processes brought by the improved hardware and software, have generated a strong demand for more accurate mathematical descriptions of the processes. Especially, the coupling of computational fluid dynamics and chemical kinetics, combustion, and thermodynamics is of current interest in process oriented technology. This colloquium attempts to give examples of modelling efforts in operation in different universities, research institutes and companies. Furthermore, the aim of this colloquium is to offer an annual opportunity to the researchers to come together and discuss their common problems and the state of their investigations

  18. 3rd Course of the International School of Advanced Geodesy

    CERN Document Server

    Sansò, Fernando

    1985-01-01

    During the period April 25th to May 10th, 1984 the 3rd Course of the International School of Advanced Geodesy entitled "Optimization and Design of Geodetic Networks" took place in Erice. The main subject of the course is clear from the title and consisted mainly of that particular branch of network analysis, which results from applying general concepts of mathematical optimization to the design of geodetic networks. As al­ ways when dealing with optimization problems, there is an a-priori choice of the risk (or gain) function which should be minimized (or maximized) according to the specific interest of the "designer", which might be either of a scientific or of an economic nature or even of both. These aspects have been reviewed in an intro­ ductory lecture in which the particular needs arising in a geodetic context and their analytical representations are examined. Subsequently the main body of the optimization problem, which has been conven­ tionally divided into zero, first, second and third order desi...

  19. Development of the 3rd Generation ECR ion source

    International Nuclear Information System (INIS)

    Lyneis, C.M.; Xie, Z.Q.; Taylor, C.E.

    1997-09-01

    The LBNL 3rd Generation ECR ion source has progressed from a concept to the fabrication of a full scale prototype superconducting magnet structure. This new ECR ion source will combine the recent ECR ion source techniques that significantly enhance the production of high charge state ions. The design includes a plasma chamber made from aluminum to provide additional cold electrons, three separate microwave feeds to allow multiple-frequency plasma heating (at 10, 14 and 18 GHz or at 6, 10 and 14 GHz) and very high magnetic mirror fields. The design calls for mirror fields of 4 T at injection and 3 T at extraction and for a radial field strength at the wall of 2.4 T. The prototype superconducting magnet structure which consists of three solenoid coils and six race track coils with iron poles forming the sextupole has been tested in a vertical dewar. After training, the sextupole magnet reached 105% of its design current with the solenoids off. With the solenoids operating at approximately 70% of their full design field, the sextuple coils operated at 95% of the design value which corresponds to a sextupole field strength at the plasma wall of more than 2.1 T

  20. The 3rd irradiation test plan of DUPIC fuel

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Myung Seung; Song, K. C.; Park, J. H. and others

    2001-05-01

    The objective of the 3rd irradiation test of DUPIC fuel at the HANARO is to estimate the in-core behaviour of a DUPIC pellet that is irradiated up to more than average burnup of CANDU fuel. The irradiation of DUPIC fuel is planned to start at May 21, 2001, and will be continued at least for 8 months. The burnup of DUPIC fuel through this irradiation test is thought to be more than 7,000 MWd/tHE. The DUPIC irradiation rig instrumented with three SPN detectors will be used to accumulate the experience for the instrumented irradiation and to estimate the burnup of irradiated DUPIC fuel more accurately. Under normal operating condition, the maximum linear power of DUPIC fuel was estimated as 55.06 kW/m, and the centerline temperature of a pellet was calculated as 2510 deg C. In order to assess the integrity of DUPIC fuel under the accident condition postulated at the HANARO, safety analyses on the locked rotor and reactivity insertion accidents were carried out. The maximum centerline temperature of DUPIC fuel was estimated 2590 deg C and 2094 deg C for each accident, respectively. From the results of the safety analysis, the integrity of DUPIC fuel during the HANARO irradiation test will be secured. The irradiated DUPIC fuel will be transported to the IMEF. The post-irradiation examinations are planned to be performed at the PIEF and IMEF.

  1. Academic Training: 3rd Term - 01 April - 30 June 2005

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004 - 2005 ACADEMIC TRAINING PROGRAMME 3rd Term - 01 April - 30 June 2005 REGULAR LECTURE PROGRAMME Monte Carlo generators fot the LHC by T. Sjostrand / CERN-PH 4, 5, 6, 7 April The LHC machine experiment interface by S. Tapprogge / Univ. Gutenberg, Mainz, D R. Assmann, CERN-AB, E. Tsesmelis and D. Macina / CERN-TS 18, 19, 20, 21, 22 April Cosmology for particle physicists by S. Carroll / Univ. of Chicago, USA 9, 10, 11, 12, 13 May The ITER projects: technological challenges by P. Bruzzone / EPFL CRPP, Zürich, CH J. Lister / EPFL CRPP, Lausanne, CH 30, 31 May, 1, 2, 3 June String theory by C. Johnson / Univ. of Southern California, USA 6, 7, 8, 9, 10 June Small may be beautiful By M. Davier / LAL, Orsay, F. T. Soldner / ILL, Grenoble, F. 13, 14, 15, 16, 17 June Climate change and challenges for the environment by C. Schluchter / Univ. Bern. CH 20, 21, 22 June LECTURE SERIES FOR POSTGRADUATE STUDENTS Particle detectors - principles and techniques by C. Joram, L. Ropelewski, M. Moll, C. ...

  2. Prophyrin identification by 3rd derivative UV/VIS spectroscopy

    International Nuclear Information System (INIS)

    Freeman, D.H.; Saint Martin, D.C.; Boreham, C.J.

    1992-01-01

    This patent describes the Soret band wavelength of nickel and vanadyl porphyrins λ Soret, which identifies etic DPEP/di-DPEP, propano and butano structure types. The approach is based upon routine diode array uv/vis spectra taken to their 3rd derivative. an interpolated zero crossing gives λ max within 0.1 nm. Accordingly, reference spectral properties of 27 well characterized metalloporphyrins were determined. When λSoret, λα and λβ and molecular mass data were combined, each of the DPEP and di-DPEP nickel complexes were distinct. In addition, λSoret was able to classify nickel etioporphyrins according to the number of beta hydrogens. To illustrate the many possible applications, two substances were isolated by HPLC from a Messel Shale extract based on known HPLC C18 retentions. Comparison of wavelength and mass between isolated and reference counterparts showed precise agreement. Thus uv/vic spectroscopy helps to classify porphyrin structure, and to facilitate identification by matching to reference data

  3. PREFACE: 3rd International Congress on Ceramics (ICC3)

    Science.gov (United States)

    Niihara, Koichi; Ohji, Tatsuki; Sakka, Yoshio

    2011-10-01

    Early in 2005, the American Ceramic Society, the European Ceramic Society and the Ceramic Society of Japan announced a collaborative effort to provide leadership for the global ceramics community that would facilitate the use of ceramic and glass materials. That effort resulted in an agreement to organize a new biennial series of the International Congress on Ceramics, convened by the International Ceramic Federation (ICF). In order to share ideas and visions of the future for ceramic and glass materials, the 1st International Congress on Ceramics (ICC1) was held in Canada, 2006, under the organization of the American Ceramic Society, and the 2nd Congress (ICC2) was held in Italy, 2008, hosted by the European Ceramic Society. Organized by the Ceramic Society of Japan, the 3rd Congress (ICC3) was held in Osaka, Japan, 14-18 November 2010. Incorporating the 23rd Fall Meeting of the Ceramic Society of Japan and the 20th Iketani Conference, ICC3 was also co-organized by the Iketani Science and Technology Foundation, and was endorsed and supported by ICF, Asia-Oceania Ceramic Federation (AOCF) as well as many other organizations. Following the style of the previous two successful Congresses, the program was designed to advance ceramic and glass technologies to the next generation through discussion of the most recent advances and future perspectives, and to engage the worldwide ceramics community in a collective effort to expand the use of these materials in both conventional as well as new and exciting applications. ICC3 consisted of 22 voluntarily organized symposia in the most topical and essential themes of ceramic and glass materials, including Characterization, design and processing technologies Electro, magnetic and optical ceramics and devices Energy and environment related ceramics and systems Bio-ceramics and bio-technologies Ceramics for advanced industry and safety society Innovation in traditional ceramics It also contained the Plenary Session and the

  4. Data of evolutionary structure change: 1ONAD-2D3RD [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ONAD-2D3RD 1ONA 2D3R D D ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLK------TNALHFMFNQFSKDQKDLILQGDAT...n> 1ONA D 1ONAD TRVS

  5. [3rd and 4th generation estroprogestatives French controversy: What effect on women's behavior?].

    Science.gov (United States)

    Torres, Luis; Frapard, Christian; Daumas, Aurélie; Guibert, Nicolas; Lagouanelle-Simeoni, Marie-Claude; Rakoto, Jean-Claude; Villani, Patrick; Sambuc, Roland

    2016-04-01

    The primary objective of this study was to determine the reasons given by women who have changed or suspended their contraceptive method in 2013. What influence had the 3rd and 4th generation estroprogestatives (EP) French controversy and advices from doctors? Did they notice any consequences of the controversy on their lifestyle? Did they feel an impact on their behavior to health professionals? A study was conducted on women of childbearing age. Data collection took place between November 4 and December 16, 2013. The included subjects were between 18 and 55 years old females. Subjects were surveyed through an anonymous self-administered questionnaire distributed through pharmacies. The protocol called for the construction of clusters of subjects by having heard about, or not, of the controversy. Patients reporting having heard about the controversy have formed the "exposed" group while the others have formed the "unexposed" group. We compared two parameters between these two groups: the rate of subjects who reported having modified or suspended their contraceptive method in 2013 on one hand, and the rate of subjects who reported having made a change in their contraceptive method without or against advices from a doctor on the other hand. The sample included 988 subjects. The average age was 34 years. The level of exposure to media debates was 86.5%. Of the respondents, 19.8% were under 3rd or 4th generation EP in 2012, thus directly involved in the discussions and affected by health recommendations. Of the patients, 38.5% reported having changed their contraception in 2013. In these women, when they confirmed having heard about the controversy, 40.1% of them claimed to have conducted this process without or against advices from a doctor. This number dropped to 18.2% for those who had not heard of it. Media coverage of the 3rd and 4th generation EP vascular risk was not mentioned more by patients who suspended all medical contraceptive method than it was by

  6. Chondromyxoid fibroma of distal 1/3 rd of fibula a rare tumour at rare ...

    African Journals Online (AJOL)

    Chondromyxoid fibromas are rare, benign tumours account for <1% of primary bone neoplasms. Most commonly affected in 2nd and 3rdof life. We report one such case of chondromyxoid fibroma in distal fibula of a 15-year-old girl. The patient was managed with lower 3rd fibulectomy and fibular turnoplasty from middle 3rd ...

  7. Exercises in statistics for HA & HA(dat.) & BSc(B), 3rd semester

    DEFF Research Database (Denmark)

    The booklet contains excercises to be used for the tutorials related to the 3rd semester course in statistics on the bachelors progarmme at the Aarhus School of Business.......The booklet contains excercises to be used for the tutorials related to the 3rd semester course in statistics on the bachelors progarmme at the Aarhus School of Business....

  8. PREFACE: 3rd International Conference of Mechanical Engineering Research (ICMER 2015)

    Science.gov (United States)

    Mamat, Riazalman; Rahman, Mustafizur; Mohd. Zuki Nik Mohamed, Nik; Che Ghani, Saiful Anwar; Harun, Wan Sharuzi Wan

    2015-12-01

    The 3rd ICMER2015 is the continuity of the NCMER2010. The year 2010 represents a significant milestone in the history for Faculty of Mechanical Engineering, Universiti Malaysia Pahang (UMP) Malaysia with the organization of the first and second national level conferences (1st and 2nd NCMER) at UMP on May 26-27 and Dec 3-4 2010. The Faculty then changed the name from National Conference on Mechanical Engineering Research (NCMER) to International Conference on Mechanical Engineering Research (ICMER) in 2011 and this year, 2015 is our 3rd ICMER. These proceedings contain the selected scientific manuscripts submitted to the conference. It is with great pleasure to welcome you to the "International Conference on Mechanical Engineering Research (ICMER2015)" that is held at Zenith Hotel, Kuantan, Malaysia. The call for papers attracted submissions of over two hundred abstracts from twelve different countries including Japan, Iran, China, Kuwait, Indonesia, Norway, Philippines, Morocco, Germany, UAE and more. The scientific papers published in these proceedings have been revised and approved by the technical committee of the 3rd ICMER2015. All of the papers exhibit clear, concise, and precise expositions that appeal to a broad international readership interested in mechanical engineering, combustion, metallurgy, materials science as well as in manufacturing and biomechanics. The reports present original ideas or results of general significance supported by clear reasoning and compelling evidence, and employ methods, theories and practices relevant to the research. The authors clearly state the questions and the significance of their research to theory and practice, describe how the research contributes to new knowledge, and provide tables and figures that meaningfully add to the narrative. In this edition of ICMER representatives attending are from academia, industry, governmental and private sectors. The plenary and invited speakers will present, discuss, promote and

  9. Book of abstracts of the 3rd International conference and the 3rd International School for young scientists Interaction of hydrogen isotopes with structural materials. IHISM-07

    International Nuclear Information System (INIS)

    2007-01-01

    The book involves abstracts of presentations at the 3rd International Conference and the 3rd International School for Young Scientists Interaction of Hydrogen Isotopes with Structural Materials (IHISM-07). The activities of Russian and foreign scientific centers associated with the use of hydrogen isotopes in power engineering, national economy and basic research are considered. The presentations cover the following areas: kinetics and interaction between hydrogen isotopes and solids including effects of radiogenic helium accumulation, hydrides and hydride transformations; structural transformations and mechanical properties; equipment and research techniques [ru

  10. 3rd International Conference on High Performance Scientific Computing

    CERN Document Server

    Kostina, Ekaterina; Phu, Hoang; Rannacher, Rolf

    2008-01-01

    This proceedings volume contains a selection of papers presented at the Third International Conference on High Performance Scientific Computing held at the Hanoi Institute of Mathematics, Vietnamese Academy of Science and Technology (VAST), March 6-10, 2006. The conference has been organized by the Hanoi Institute of Mathematics, Interdisciplinary Center for Scientific Computing (IWR), Heidelberg, and its International PhD Program ``Complex Processes: Modeling, Simulation and Optimization'', and Ho Chi Minh City University of Technology. The contributions cover the broad interdisciplinary spectrum of scientific computing and present recent advances in theory, development of methods, and applications in practice. Subjects covered are mathematical modelling, numerical simulation, methods for optimization and control, parallel computing, software development, applications of scientific computing in physics, chemistry, biology and mechanics, environmental and hydrology problems, transport, logistics and site loca...

  11. 3rd International Conference on Health Care Systems Engineering

    CERN Document Server

    Li, Jingshan; Matta, Andrea; Sahin, Evren; Vandaele, Nico; Visintin, Filippo

    2017-01-01

    This book presents statistical processes for health care delivery and covers new ideas, methods and technologies used to improve health care organizations. It gathers the proceedings of the Third International Conference on Health Care Systems Engineering (HCSE 2017), which took place in Florence, Italy from May 29 to 31, 2017. The Conference provided a timely opportunity to address operations research and operations management issues in health care delivery systems. Scientists and practitioners discussed new ideas, methods and technologies for improving the operations of health care systems, developed in close collaborations with clinicians. The topics cover a broad spectrum of concrete problems that pose challenges for researchers and practitioners alike: hospital drug logistics, operating theatre management, home care services, modeling, simulation, process mining and data mining in patient care and health care organizations.

  12. 3rd International Conference on NeuroRehabilitation

    CERN Document Server

    González-Vargas, José; Azorín, José; Akay, Metin; Pons, José

    2017-01-01

    The book reports on advanced topics in the areas of neurorehabilitation research and practice. It focuses on new methods for interfacing the human nervous system with electronic and mechatronic systems to restore or compensate impaired neural functions. Importantly, the book merges different perspectives, such as the clinical, neurophysiological, and bioengineering ones, to promote, feed and encourage collaborations between clinicians, neuroscientists and engineers. Based on the 2016 International Conference on Neurorehabilitation (ICNR 2016) held on October 18-21, 2016, in Segovia, Spain, this book covers various aspects of neurorehabilitation research and practice, including new insights into biomechanics, brain physiology, neuroplasticity, and brain damages and diseases, as well as innovative methods and technologies for studying and/or recovering brain function, from data mining to interface technologies and neuroprosthetics. In this way, it offers a concise, yet comprehensive reference guide to neurosurg...

  13. 3rd International Conference on Turbulent Mixing and Beyond

    Science.gov (United States)

    Abarzhi, Snezhana I.; Gauthier, Serge; Keane, Christopher J.; Niemela, Joseph J.

    2013-07-01

    non-equilibrium heat transfer, strong shocks and explosions, material transformation under high strain rate, supernovae and accretion discs, stellar non-Boussinesq and magneto-convection, planetary interiors and mantle-lithosphere tectonics, premixed and non-premixed combustion, non-canonical wall-bounded flows, hypersonic and supersonic boundary layers, dynamics of atmosphere and oceanography, are just a few examples to list. A grip on non-equilibrium turbulent processes is crucial for cutting-edge technology such as laser micro-machining, nano-electronics, free-space optical telecommunications and for industrial applications in the areas of aeronautics and aerodynamics. Non-equilibrium turbulent processes are anisotropic, non-local, multi-scale and multi-phase, and often are driven by shocks or acceleration. Their scaling, spectral and invariant properties differ substantially from those of classical Kolmogorov turbulence. At atomistic and meso-scales, the non-equilibrium dynamics depart dramatically from a standard scenario given by Gibbs statistic ensemble average and quasi-static Boltzmann equation. The singular aspect and the similarity of the non-equilibrium dynamics at macroscopic scales are interplayed with the fundamental properties of the Euler and compressible Navier-Stokes equations and with the problem sensitivity to the boundary conditions at discontinuities. The state-of-the-art numerical simulations of multi-phase flows suggest new methods for predictive modelling of the multi-scale non-equilibrium dynamics in fluids and plasmas, for error estimates and uncertainty quantifications, as well as for novel data assimilation techniques. 3. International Conference 'Turbulent Mixing and Beyond' The First and Second International Conferences on Turbulent Mixing and Beyond found that: (i) TMB-related problems have in common a set of outstanding research issues; (ii) their solution has a potential to significantly advance a variety of disciplines in science

  14. Operation results of 3-rd generation nuclear fuel WWER-440 in initial period

    International Nuclear Information System (INIS)

    Adeev, V.; Panov, A.

    2011-01-01

    On unit 4 of Kola NPP trial operation of 3-rd generation's fuel began in 2010. Fuel assemblies of 3-rd generation (FA-3) have a number of design features that provide better operational characteristics. Concise description of a design and the basic advantages of fuel of 3-rd generation are described in articles. Increasing of efficiency of nuclear fuel usage will be achieved by reduction of the parasitic capture of thermal neutrons in constructional materials (weight of zirconium is reduced), optimization of uranium-water relation (increase in fuel elements step), increasing of uranium loading (usage of fuel pellets with increased diameter and without central hole in them). By results of trial operation mass transition to use of given type of assemblies in WWER-440 is possible. This report presents the basic outcomes of the trial operation, a brief survey of the obtained data. The basic characteristics of the reactor core with fuel of 3-rd generation are resulted in work. (authors)

  15. The 3rd international intercomparison on EPR tooth dosimetry: Part 1, general analysis

    International Nuclear Information System (INIS)

    Wieser, A.; Debuyst, R.; Fattibene, P.

    2005-01-01

    The objective of the 3rd International Intercomparison on Electron Paramagnetic Resonance (EPR) Tooth Dosimetry was the evaluation of laboratories performing tooth enamel dosimetry below 300 mGy. Participants had to reconstruct the absorbed dose in tooth enamel from 11 molars, which were cut into two halves. One half of each tooth was irradiated in a 60 Co beam to doses in the ranges of 30-100 mGy (5 samples), 100-300 mGy (5 samples), and 300-900 mGy (1 sample). Fourteen international laboratories participated in this intercomparison programme. A first analysis of the results and an overview of the essential features of methods applied in different laboratories are presented. The relative standard deviation of results of all methods was better than 27% for applied doses in the range of 79-704 mGy. In the analysis of the unirradiated tooth halves 8% of the samples were identified as outliers with additional absorbed dose above background dose

  16. PREFACE: 3rd International Symposium on Functional Materials 2009 (ISFM 2009) 3rd International Symposium on Functional Materials 2009 (ISFM 2009)

    Science.gov (United States)

    Kiwon, Kim; Li, Lu; Taehyun, Nam; Jouhyeon, Ahn

    2010-05-01

    The 3rd International Symposium on Functional Materials 2009 (ISFM 2009) and its preconference, Advances in Functional Materials 2009 (AFM 2009), were successfully held in the Republic of Korea from 15-18 June 2009 and in the People's Republic of China from 8-12 June 2009, respectively. The two conferences attracted over 300 oral and poster presentations from over 12 countries including Australia, Canada, China, Germany, Japan, India, Israel, Korea, The Netherlands, Thailand, the UK and the USA. In the two conferences, eight keynote lectures were delivered by S Miyazaki, S A Akbar, D J Singh, C Suryanarayana, M~Greenblatt, H Zhang, T Sato and J Ding. This topical issue of Physica Scripta contains papers presented at the ISFM 2009 and AFM 2009. Keyan Li from Dalian University, People's Republic of China, presents some empirical formulae to estimate the elastic moduli of rocksalt-, zincblende- and chalcopyrite-structured crystals, on the basis of electronegativities of bonded atoms in the crystallographic frame. Min-Jung Kim from Hanyang University, Korea, reports on the preparation and characterization of carboxyl functionalization of magnetite nanoparticles for oligonucleotide immobilization. F Yan from the National University of Singapore studies the fabrication of Bi(Fe0.5Sc0.5)O3-PbTiO3 (BSF-PT) thin films by pulsed laser deposition, and the enhanced magnetic moment with respect to BiFeO3-PbTiO3. Dong-Gil Lee from Pusan National University, Korea, reports on the sterilization of enteropathogenic Escherichia coli using nanofiber TiO2 films prepared by the electrostatic spray method. Sang-Eun Park from the Korea Institute of Science and Technology reports on the study of encapsulated Fe3O4 nanoparticles with a silica thin layer with a reversible capacity of about 363 mAhg-1. Other researchers report on many other exiting achievements in the fields of ferromagnetic materials, magneto-optical materials, thermoelectric materials, shape memory materials, fuel-cell and

  17. File list: Oth.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.Lar.10.AllAg.3rd_instar dm3 TFs and others Larvae 3rd instar SRX104963,SRX10497...4971,SRX331403 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.Lar.10.AllAg.3rd_instar.bed ...

  18. File list: Oth.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.Lar.20.AllAg.3rd_instar dm3 TFs and others Larvae 3rd instar SRX318781,SRX31878...1403,SRX495243 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.Lar.20.AllAg.3rd_instar.bed ...

  19. File list: Unc.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.Lar.10.AllAg.3rd_instar dm3 Unclassified Larvae 3rd instar SRX1038029,SRX103803...1,SRX1038032,SRX1038030,SRX032124,SRX032123,SRX022335,SRX022334,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Unc.Lar.10.AllAg.3rd_instar.bed ...

  20. File list: InP.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.Lar.20.AllAg.3rd_instar dm3 Input control Larvae 3rd instar SRX467108,SRX287726...67103,SRX288024,SRX288023,SRX104976,SRX016172,SRX467107,SRX016173 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.Lar.20.AllAg.3rd_instar.bed ...

  1. File list: Pol.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.Lar.10.AllAg.3rd_instar dm3 RNA polymerase Larvae 3rd instar SRX287908,SRX28790...7,SRX013070,SRX013082 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Pol.Lar.10.AllAg.3rd_instar.bed ...

  2. File list: InP.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.Lar.10.AllAg.3rd_instar dm3 Input control Larvae 3rd instar SRX016172,SRX016173...87701,SRX287922,SRX467104,SRX287918,SRX287718,SRX104976,SRX467107 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.Lar.10.AllAg.3rd_instar.bed ...

  3. File list: ALL.Lar.05.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.Lar.05.AllAg.3rd_instar dm3 All antigens Larvae 3rd instar SRX104964,SRX104963,...SRX287718,SRX331401,SRX287658,SRX331366,SRX287906,SRX287678 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.05.AllAg.3rd_instar.bed ...

  4. File list: Pol.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.Lar.50.AllAg.3rd_instar dm3 RNA polymerase Larvae 3rd instar SRX287908,SRX28790...7,SRX013070,SRX013082 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Pol.Lar.50.AllAg.3rd_instar.bed ...

  5. File list: ALL.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.Lar.50.AllAg.3rd_instar dm3 All antigens Larvae 3rd instar SRX1038029,SRX103803...SRX467060,SRX495306,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.50.AllAg.3rd_instar.bed ...

  6. File list: Unc.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.Lar.20.AllAg.3rd_instar dm3 Unclassified Larvae 3rd instar SRX1038029,SRX103803...1,SRX1038032,SRX1038030,SRX022335,SRX032124,SRX022334,SRX032123,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Unc.Lar.20.AllAg.3rd_instar.bed ...

  7. File list: Pol.Lar.05.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.Lar.05.AllAg.3rd_instar dm3 RNA polymerase Larvae 3rd instar SRX287907,SRX28790...8,SRX013070,SRX013082 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Pol.Lar.05.AllAg.3rd_instar.bed ...

  8. File list: ALL.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.Lar.10.AllAg.3rd_instar dm3 All antigens Larvae 3rd instar SRX104963,SRX104968,...SRX287718,SRX022334,SRX104976,SRX467107,SRX013086,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.10.AllAg.3rd_instar.bed ...

  9. File list: ALL.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.Lar.20.AllAg.3rd_instar dm3 All antigens Larvae 3rd instar SRX1038029,SRX103803...SRX013082,SRX467107,SRX016173,SRX215499,SRX495243,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.20.AllAg.3rd_instar.bed ...

  10. File list: Unc.Lar.05.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.Lar.05.AllAg.3rd_instar dm3 Unclassified Larvae 3rd instar SRX1038031,SRX103802...9,SRX1038032,SRX1038030,SRX022335,SRX022334,SRX032124,SRX013058,SRX032123 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Unc.Lar.05.AllAg.3rd_instar.bed ...

  11. File list: Pol.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.Lar.20.AllAg.3rd_instar dm3 RNA polymerase Larvae 3rd instar SRX287908,SRX28790...7,SRX013070,SRX013082 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Pol.Lar.20.AllAg.3rd_instar.bed ...

  12. File list: InP.Lar.05.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.Lar.05.AllAg.3rd_instar dm3 Input control Larvae 3rd instar SRX016173,SRX288024...87921,SRX287718,SRX331401,SRX287658,SRX331366,SRX287906,SRX287678 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.Lar.05.AllAg.3rd_instar.bed ...

  13. File list: Oth.Lar.05.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.Lar.05.AllAg.3rd_instar dm3 TFs and others Larvae 3rd instar SRX104964,SRX10496...1403,SRX495243 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.Lar.05.AllAg.3rd_instar.bed ...

  14. File list: Unc.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.Lar.50.AllAg.3rd_instar dm3 Unclassified Larvae 3rd instar SRX1038029,SRX103803...1,SRX1038032,SRX1038030,SRX022335,SRX032124,SRX032123,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Unc.Lar.50.AllAg.3rd_instar.bed ...

  15. File list: InP.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.Lar.50.AllAg.3rd_instar dm3 Input control Larvae 3rd instar SRX287726,SRX331369...87917,SRX287921,SRX288023,SRX467107,SRX016172,SRX016173 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.Lar.50.AllAg.3rd_instar.bed ...

  16. File list: Oth.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.Lar.50.AllAg.3rd_instar dm3 TFs and others Larvae 3rd instar SRX318781,SRX31878...5306 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.Lar.50.AllAg.3rd_instar.bed ...

  17. Proceedings of the 3rd workshop on ion-beam-applied biology

    International Nuclear Information System (INIS)

    Matsuhashi, Shinpei; Suzui, Nobuo; Ishioka, Noriko S.

    2005-09-01

    In order to encourage research on biological application using ion beam at TIARA, we have had the workshop on ion beam applied biology at JAERI Takasaki every year since 2002. The 3rd workshop titled 'Future development of plant research using the positron imaging method - Understanding the plant functions through visualization images-' is held this year. The main topics of this workshop are introduction of the latest studies on the assimilation and transportation of nutrients by plant using positron imaging method. Further, related technologies of the positron imaging and prospect of positron imaging for is discussed. We hope this workshop popularizes positron imaging technology for plants, accelerates cooperation between industries, universities and governmental institutes and contributes future projects of understanding of the physiological functions of plants using the positron imaging method. This workshop was held on September 29th 2004, hosted by JAERI Takasaki and cooperated by The Japan Radioisotope Association, Japanese Society of Soil Science and Plant Nutrition. The Japanese Society of Plant Physiologists, Atomic Energy Society of Japan, The Japanese Society of Nuclear and Radiochemical Science and The Ion Beam Breeding Society. There were 85 participants from not only universities and laboratories but also private company developing the environment conservation technology, so on. Highly qualified presentations were given on biological studies with ion beam, on analysis of plant functions using the positron imaging method and on supporting technology for the positron imaging monitoring. Progress in the elucidation of plant functions is expected to develop the technologies for production of safe provisions and conservation of environment with plant. The 14 of the presented papers are indexed individually. (J.P.N.)

  18. PreK-3rd: What Is the Price Tag? Policy to Action Brief. No. 2

    Science.gov (United States)

    Shore, Rima

    2009-01-01

    In an era of intense fiscal pressures, educators are focusing on those investments most likely to lift student achievement. They are also trying to make more strategic use of existing resources. To achieve these goals, a growing number of policymakers are considering integrated PreK-3rd approaches. Increasingly, they are recognizing that the first…

  19. Participants to the 3rd HEP Information Resources Summit, 6-7 May 2009

    CERN Multimedia

    Fermilab, Photo Service

    2009-01-01

    The broad theme of the 3rd HEP Information Resources Summit was "Collaboration between Information Services." As HEP increasingly borders fields such as instrumentation and astrophysics, it was discussed what potential interrelationships and communication this group have to serve this broader research community seamlessly.

  20. Using Food as a Tool to Teach Science to 3rd Grade Students in Appalachian Ohio

    Science.gov (United States)

    Duffrin, Melani W.; Hovland, Jana; Carraway-Stage, Virginia; McLeod, Sara; Duffrin, Christopher; Phillips, Sharon; Rivera, David; Saum, Diana; Johanson, George; Graham, Annette; Lee, Tammy; Bosse, Michael; Berryman, Darlene

    2010-01-01

    The Food, Math, and Science Teaching Enhancement Resource (FoodMASTER) Initiative is a compilation of programs aimed at using food as a tool to teach mathematics and science. In 2007 to 2008, a foods curriculum developed by professionals in nutrition and education was implemented in 10 3rd-grade classrooms in Appalachian Ohio; teachers in these…

  1. Malaria and fetal growth alterations in the 3(rd) trimester of pregnancy

    DEFF Research Database (Denmark)

    Schmiegelow, Christentze; Minja, Daniel Thomas; Oesterholt, Mayke

    2013-01-01

    Pregnancy associated malaria is associated with decreased birth weight, but in-utero evaluation of fetal growth alterations is rarely performed. The objective of this study was to investigate malaria induced changes in fetal growth during the 3(rd) trimester using trans-abdominal ultrasound....

  2. Developments in Processing by Severe Plastic Deformation at the 3rd Pan American Materials Congress

    Science.gov (United States)

    Figueiredo, Roberto B.; Kawasaki, Megumi; Langdon, Terence G.

    2017-10-01

    The 3rd Pan American Materials Congress in San Diego, California, February 26-March 2, 2017, provided an opportunity to bring together many participants working in the field of severe plastic deformation. This article provides a brief review of these activities.

  3. Epidemiology of 3rd generation cephalosporin-resistant Escherichia coli on dairy farms

    Science.gov (United States)

    Dairy cattle have been identified as a reservoir for 3rd generation cephalosporin (3GC)-resistant Escherichia coli. We previously identified 3GC-resistant E. coli from manure composite samples of calves and cows in a survey of 80 farms in Pennsylvania. Resistant strains were most frequently isolated...

  4. Starting Young: Massachusetts Birth-3rd Grade Policies That Support Children's Literacy Development

    Science.gov (United States)

    Cook, Shayna; Bornfreund, Laura

    2015-01-01

    Massachusetts is one of a handful of states that is often recognized as a leader in public education, and for good reason. The Commonwealth consistently outperforms most states on national reading and math tests and often leads the pack in education innovations. "Starting Young: Massachusetts Birth-3rd Grade Policies that Support Children's…

  5. 75 FR 34450 - Filing Dates for the Indiana Special Election in the 3rd Congressional District

    Science.gov (United States)

    2010-06-17

    ... 3rd Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special election. SUMMARY: Indiana has scheduled a Special General Election on November 2, 2010, to fill.... Committees required to file reports in connection with the Special General Election on November 2, 2010...

  6. Approaches to ultra-low radiation dose coronary artery calcium scoring based on 3rd generation dual-source CT : A phantom study

    NARCIS (Netherlands)

    McQuiston, Andrew D.; Muscogiuri, Giuseppe; Schoepf, U. Joseph; Meinel, Felix G.; Canstein, Christian; Varga-Szemes, Akos; Cannao, Paola M.; Wichmann, Julian L.; Allmendinger, Thomas; Vliegenthart, Rozemarijn; De Cecco, Carlo N.

    Objectives: To investigate to what extent 3rd generation dual-source computed tomography (DSCT) can reduce radiation dose in coronary artery calcium scoring. Methods: Image acquisition was performed using a stationary calcification phantom. Prospectively electrocardiogram (ECG)-triggered 120 kV

  7. PREFACE: 3rd International Youth Conference "Interdisciplinary Problems of Nanotechnology, Biomedicine and Nanotoxicology" (Nanobiotech 2015)

    Science.gov (United States)

    Refsnes, Magne, Prof; Gusev, Alexander, Dr; Godymchuk, Anna, Dr; Bogdan, Anna

    2015-11-01

    The 3rd International Youth Conference "Interdisciplinary Problems of Nanotechnology, Biomedicine and Nanotoxicology" (Nanobiotech2015) was held on 21-22 May 2015 in Tambov, Russia, and was jointly organized by Tambov Derzhavin State University (Russia), the Norwegian Institute of Public Health (Norway), the National University of Science and Technology MISiS (Russia), Tomsk Polytechnic University (Russia) and Tomsk State University. The conference gathered experienced and young researchers, post-docs and students, working in the fieldof nanotechnologies, nanomedicine, nano(eco)toxicology and risk assessment of nanomaterials, in order to facilitate the aggregation and sharing of interests and results for better collaboration and visibility of activity. The goal of Nanobiotech2015 was to bring researchers and practitioners together to share the latest knowledge on nanotechnology-specific risks to occupational and environmental health and assessing how to reduce these potential risks. The main objective of the conference is to identify, systematize and solve current scientific problems inthe sphere of nanobiotechnologies, nanomedicine and nanotoxicology, in order to join forces todetermine prospective areas and compose working groups of interested co-workers for carrying out interdisciplinary research projects. The topics of Nanobiotech2015 were: (1) Nanotechnologies in pharmaceutics and medicine; (2) Sources and mechanisms of nanoparticle release into the environment; (3) Ecological and biological effects of nanoparticles; (4) (Eco)toxicology of nanomaterials; (5) Methods for detection of nanoparticles in the environment and in biological objects; and (6) Physico-chemical properties of nanoparticles in the environment. We want to thank the Organizing Committee, the universities and sponsors supporting the conference,and everyone who contributed to the organization of this meeting, for their contribution towards the conference and for their contributions to these

  8. AN ANALYSIS OF STUDENTS’ SPEAKING ABILITY IN ENGLISH CONVERSATION CLUB (ECC PROGRAM AT THE 3rd SEMESTER

    Directory of Open Access Journals (Sweden)

    M. Fadhly Farhy Abbas

    2017-07-01

    Full Text Available This research is based on students’ speaking ability who had followed the EnglishConversation Club (ECC program especially for the third semester of English Department. Thepurpose of this study was to analyze the students’ speaking ability at the 3rd semester in the EnglishConversation Club FKIP UNILAK Pekanbaru. The type of the research was mixed method in typeof explanatory design. The number of participant was 53 students. The researcher used twoinstruments, those were test and interview. In analyzing the data, it used in descriptive statistics.The result of the analysis showed that the average score of 3rd semester students’ speaking abilitywas 45.42. It can be concluded that the students’ speaking ability was categorized into failed . Thescore of Standard Deviation was 7.02, Variance was 49.30, and Range was 36 points . It meansthat the students’ speaking ability was homogeneous. According to the Z-Score, it can be seen that49.06% students’ ability was higher than average and 50.94% students ability was below theaverage. In conclusion, the students’ ability in learning speaking English was failed, it had beenaffected by some factors, those were lack of vocabulary, grammar and motivation. It was supportedby the interview, eventhough the students’ perception to English Conversation Club (ECCprogram was positive, but in fact, the students’ frequency to speak English was seldom, they wereless practice speaking English everyday.Keywords : Speaking , English Conversation Club (ECC

  9. Differentiation of initial skills in 1st grade and the relative age effect in 3rd grade

    Directory of Open Access Journals (Sweden)

    KRZYSZTOF KONARZEWSKI

    2017-06-01

    Full Text Available The paper aims to verify two hypotheses. The first states that the differentiation of initial 1st grade pupil skills is negatively correlated with age at entry to school. This was tested according to findings from the ERI study Six and seven year olds at the start of school. The variation of reading and writing scores of 1164 pupils aged 5.9–7.9 years who were beginning 1st grade decreased in subsequent age quartiles. The second hypothesis – that classroom differentiation of pupils’ initial skills in 1st grade is positively correlated with the birthdate effect in 3rd grade – was tested on data of 4838 pupils from 254 classrooms drawn from the 2011 PIRLS and TIMSS studies in Poland. Skills were evaluated on the basis of parental reports. Hierarchical linear analysis (gender, SES and school location controlled showed that the greater the differentiation of language skills in 1st grade, the greater the birthdate effect in mathematics in 3rd grade. This result suggests that school entry age is of lesser importance than the methods used to reduce differences in children’s school readiness at the onset of education.

  10. ChemSession'06 - 3rd Seminary of Warsaw PhD Students in Chemistry. Abstracts

    International Nuclear Information System (INIS)

    Zachara, J.; Lulinski, S.; Dobrowolski, J.C.; Raczynska, E.D.; Fuks, L.; Cyranski, M.K.; Stepien, B.T.; Sawicki, M.G.

    2006-01-01

    3 rd Annual Seminary of Warsaw PhD Students in Chemistry presented the latest achievements in chemistry, obtained in all Warsaw universities and scientific institutes. In 2006 participants presented 4 plenary lectures, and 109 posters. Among others, posters covered four disciplines related to the nuclear sciences: (a) radiobiology and radiotherapy, (b) radiation chemistry and photochemistry, (c) isotopic effects in chemistry, and (d) chemical technology

  11. Tretji slovenski MoodleMoot = 3rd Slovenian MoodleMoot

    Directory of Open Access Journals (Sweden)

    Viktorija Sulčič

    2009-09-01

    Full Text Available This year, the 3rd international moodle.si conference took place in Koper and brought together Slovenian users of Moodle, an open-source learning management system. This year’s conference, which is presented in the paper, was especially interesting due to its plenary session being wholly dedicated to the national e-schooling project. An interesting addition was also Apple’s workshop about using iLife applications in education.

  12. Sandstone columns of the 3rd Nile Cataract (Nubia, Northern Sudan)

    Czech Academy of Sciences Publication Activity Database

    Cílek, Václav; Adamovič, Jiří; Suková, L.

    2015-01-01

    Roč. 59, Supplement 1 (2015), s. 151-165 ISSN 0372-8854 Grant - others:Program interní podpory projektů mezinárodní spolupráce AV ČR(CZ) M100130902 Institutional support: RVO:67985831 Keywords : Nubian sandstone * columnar jointing * Voronoi fragmentation * 3rd Nile Cataract * Sudan Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.103, year: 2015

  13. The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

    International Nuclear Information System (INIS)

    Salmela, Olli

    2005-01-01

    In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered

  14. The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

    Energy Technology Data Exchange (ETDEWEB)

    Salmela, Olli [Nokia Networks, P.O. Box 301, 00045 Nokia Group (Finland)]. E-mail: olli.salmela@nokia.com

    2005-08-01

    In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered.

  15. ic-cmtp3: 3rd International Conference on Competitive Materials and Technology Processes

    Science.gov (United States)

    2016-04-01

    Competitiveness is one of the most important factors in our lives and it plays a key role in the efficiency both of organizations and societies. The more scientifically advanced and prepared organizations develop more competitive materials with better physical, chemical, and biological properties, and the leading companies apply more competitive equipment and technological processes. The aims of the 3rd International Conference on Competitive Materials and Technology Processes (ic-cmtp3), and the 1st International Symposium on Innovative Carbons and Carbon Based Materials (is-icbm1) and the 1st International Symposium on Innovative Construction Materials (is-icm1) organized alongside are the following: —Promote new methods and results of scientific research in the fields of material, biological, environmental and technological sciences; —Exchange information between the theoretical and applied sciences as well as technical and technological implementations; —Promote communication and collaboration between the scientists, researchers and engineers of different nations, countries and continents. Among the major fields of interest are advanced and innovative materials with competitive characteristics, including mechanical, physical, chemical, biological, medical and thermal, properties and extreme dynamic strength. Their crystalline, nano - and micro-structures, phase transformations as well as details of their technological processes, tests and measurements are also in the focus of the ic-cmtp3 conference and the is-scbm1 and is-icm1 symposia. Multidisciplinary applications of material science and the technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industries, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance with the program of the ic-cmtp3 conference and is-icbm1 and is-icm1 symposia we have received more

  16. PREFACE: 3rd International Workshop on Statistical Physics and Mathematics for Complex Systems (SPMCS 2012)

    Science.gov (United States)

    Tayurskii, Dmitrii; Abe, Sumiyoshi; Alexandre Wang, Q.

    2012-11-01

    The 3rd International Workshop on Statistical Physics and Mathematics for Complex Systems (SPMCS2012) was held between 25-30 August at Kazan (Volga Region) Federal University, Kazan, Russian Federation. This workshop was jointly organized by Kazan Federal University and Institut Supérieur des Matériaux et Mécaniques Avancées (ISMANS), France. The series of SPMCS workshops was created in 2008 with the aim to be an interdisciplinary incubator for the worldwide exchange of innovative ideas and information about the latest results. The first workshop was held at ISMANS, Le Mans (France) in 2008, and the third at Huazhong Normal University, Wuhan (China) in 2010. At SPMCS2012, we wished to bring together a broad community of researchers from the different branches of the rapidly developing complexity science to discuss the fundamental theoretical challenges (geometry/topology, number theory, statistical physics, dynamical systems, etc) as well as experimental and applied aspects of many practical problems (condensed matter, disordered systems, financial markets, chemistry, biology, geoscience, etc). The program of SPMCS2012 was prepared based on three categories: (i) physical and mathematical studies (quantum mechanics, generalized nonequilibrium thermodynamics, nonlinear dynamics, condensed matter physics, nanoscience); (ii) natural complex systems (physical, geophysical, chemical and biological); (iii) social, economical, political agent systems and man-made complex systems. The conference attracted 64 participants from 10 countries. There were 10 invited lectures, 12 invited talks and 28 regular oral talks in the morning and afternoon sessions. The book of Abstracts is available from the conference website (http://www.ksu.ru/conf/spmcs2012/?id=3). A round table was also held, the topic of which was 'Recent and Anticipated Future Progress in Science of Complexity', discussing a variety of questions and opinions important for the understanding of the concept of

  17. Foundational Skills to Support Reading for Understanding in Kindergarten through 3rd Grade. Educator's Practice Guide. NCEE 2016-4008

    Science.gov (United States)

    Foorman, Barbara; Beyler, Nicholas; Borradaile, Kelley; Coyne, Michael; Denton, Carolyn A.; Dimino, Joseph; Furgeson, Joshua; Hayes, Lynda; Henke, Juliette; Justice, Laura; Keating, Betsy; Lewis, Warnick; Sattar, Samina; Streke, Andrei; Wagner, Richard; Wissel, Sarah

    2016-01-01

    The goal of this practice guide is to offer educators specific, evidence-based recommendations for teaching foundational reading skills to students in kindergarten through 3rd grade. This guide is a companion to the existing practice guide, "Improving Reading Comprehension in Kindergarten Through 3rd Grade", and as a set, these guides…

  18. Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium on energy research in its 3rd year (Research and development of novel method for manufacturing recycling-compatible functional thin film and its application to coloring of glass); 1999 nendo recycle ni tekishita kinosei usumaku no shinki seizoho to chakushoku glass eno oyo ni kansuru kenkyu kaihatsi seika hokokusho. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    A thin film is developed which adds new functions to the surface of glass materials. The method is applied to the coloring of glass for the enhancement of recyclability (for example, by coating colorless glass bottles with colorful thin film) and to the functionalization of glass. Studies are conducted about the assessment of coloring-capable thin film basic characteristics, manufacture of liquids for application, and the manufacture of photosensitive gel thin film using chemically modified metal alkoxides. It is found that use of functional pigments reduces the transmissivity of ultraviolet and infrared rays. A method for manufacturing coloring liquids for application to glass bottles and a method of improving film durability using a 3,2-functional silane are established. Ultrafine gold/cuprous oxide powder, azobenzen based pigments, etc., are deposited on porous glass for the formation of a photoresponsive film. Conditions for color application to round glass bottles are optimized by use of an air spray device. Film exfoliation during colored glass bottle transportation is lessoned to a practically acceptable level by modifying the carton pack configuration. A large roll-type applicator is operated to successfully form a homogenous coating on a 1.8m times 1m glass plate. Double glazing capable of light modulation is also manufactured. (NEDO)

  19. Summary of the 3rd workshop on the reduced-moderation water reactor

    International Nuclear Information System (INIS)

    Ishikawa, Nobuyuki; Nakatsuka, Tohru; Iwamura, Takamichi

    2000-06-01

    The research activities of a Reduced-Moderation Water Reactor (RMWR) are being performed for a development of the next generation water-cooled reactor. A workshop on the RMWR was held on March 3rd 2000 aiming to exchange information between JAERI and other organizations such as universities, laboratories, utilities and vendors. This report summarizes the contents of lectures and discussions on the workshop. The 1st workshop was held on March 1998 focusing on the review of the research activities and future research plan. The succeeding 2nd workshop was held on March 1999 focusing on the topics of the plutonium utilization in water-cooled reactors. The 3rd workshop was held on March 3rd 2000, which was attended by 77 participants. The workshop began with a lecture titled 'Recent Situation Related to Reduced-Moderation Water Reactor (RMWR)', followed by 'Program on MOX Fuel Utilization in Light Water Reactors' which is the mainstream scenario of plutonium utilization by utilities, and 'Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' mainly conducted by Japan Nuclear Cycle Development Institute (JNC). Also, following lectures were given as the recent research activities in JAERI: 'Progress in Design Study on Reduced-Moderation Water Reactors', 'Long-Term Scenarios of Power Reactors and Fuel Cycle Development and the Role of Reduced Moderation Water Reactors', 'Experimental and Analytical Study on Thermal Hydraulics' and Reactor Physics Experiment Plan using TCA'. At the end of the workshop, a general discussion was performed about the research and development of the RMWR. This report includes the original papers presented at the workshop and summaries of the questions and answers for each lecture and general discussion, as well as presentation viewgraphs, program and participant list as appendixes. The 7 of the presented papers are indexed individually. (J.P.N.)

  20. Summary of the 3rd workshop on the reduced-moderation water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, Nobuyuki; Nakatsuka, Tohru; Iwamura, Takamichi [eds.

    2000-06-01

    The research activities of a Reduced-Moderation Water Reactor (RMWR) are being performed for a development of the next generation water-cooled reactor. A workshop on the RMWR was held on March 3rd 2000 aiming to exchange information between JAERI and other organizations such as universities, laboratories, utilities and vendors. This report summarizes the contents of lectures and discussions on the workshop. The 1st workshop was held on March 1998 focusing on the review of the research activities and future research plan. The succeeding 2nd workshop was held on March 1999 focusing on the topics of the plutonium utilization in water-cooled reactors. The 3rd workshop was held on March 3rd 2000, which was attended by 77 participants. The workshop began with a lecture titled 'Recent Situation Related to Reduced-Moderation Water Reactor (RMWR)', followed by 'Program on MOX Fuel Utilization in Light Water Reactors' which is the mainstream scenario of plutonium utilization by utilities, and 'Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' mainly conducted by Japan Nuclear Cycle Development Institute (JNC). Also, following lectures were given as the recent research activities in JAERI: 'Progress in Design Study on Reduced-Moderation Water Reactors', 'Long-Term Scenarios of Power Reactors and Fuel Cycle Development and the Role of Reduced Moderation Water Reactors', 'Experimental and Analytical Study on Thermal Hydraulics' and Reactor Physics Experiment Plan using TCA'. At the end of the workshop, a general discussion was performed about the research and development of the RMWR. This report includes the original papers presented at the workshop and summaries of the questions and answers for each lecture and general discussion, as well as presentation viewgraphs, program and participant list as appendixes. The 7 of the presented papers are indexed individually. (J.P.N.)

  1. The role of hemorrhoidopexy in the management of 3rd degree hemorrhoids.

    Science.gov (United States)

    Pramateftakis, M G

    2010-11-01

    Hemorrhoidopathy is a very common benign surgical pathology. Hemorrhoids are divided into 4 stages, depending on symptoms and degree of prolapse. Hemorrhoidopexy is a technique developed for the treatment of 3rd degree hemorrhoids, but its application has been extended to the treatment of 4th degree hemorrhoids as well. Nevertheless, recent studies identify weaknesses of the PPH in the treatment of 4th degree hemorrhoids. One hundred and twenty-six consecutive patients with 3rd degree hemorrhoids underwent stapled hemorrhoidopexy. All procedures were performed under general anesthesia with the patient in lithotomy position. A phosphate enema was given to the patient 2 h before the procedure, and cephalosporine and metronidazole were administered at anesthesia induction. Most patients were discharged the day after the operation. All patients were reassessed at 1, 6 weeks, 6 and 12 months after the procedure. The mean operating time was 16.3 min. Of all patients, 5.8% complained of mild rectal pain for a post-operative period of 5-12 days, 5.8% developed post-operative urinary retention, managed with catheterization, 13.3% experienced fecal urgency while 5.8% experienced gas incontinence, which subsided 2-8 weeks from surgery. The mean hospital stay was 1.2 days. Most patients returned to daily activities within 2-5 days. Ninety-five percent of patients returned for their follow-up visits. Recurrence of the disease occurred in 8 patients (6.6%). It was managed conservatively in 2 patients, 3 underwent redo hemorrhoidopexy and 3 underwent classic hemorrhoidectomy. According to our results, stapled hemorrhoidopexy seems to be a safe, pain-free and, in the long-term, effective technique for the treatment of 3rd degree hemorrhoids.

  2. 3rd International Conference on Modelling, Computation and Optimization in Information Systems and Management Sciences

    CERN Document Server

    Dinh, Tao; Nguyen, Ngoc

    2015-01-01

    This proceedings set contains 85 selected full papers presented at the 3rd International Conference on Modelling, Computation and Optimization in Information Systems and Management Sciences - MCO 2015, held on May 11–13, 2015 at Lorraine University, France. The present part I of the 2 volume set includes articles devoted to Combinatorial optimization and applications, DC programming and DCA: thirty years of Developments, Dynamic Optimization, Modelling and Optimization in financial engineering, Multiobjective programming, Numerical Optimization, Spline Approximation and Optimization, as well as Variational Principles and Applications

  3. 3rd IFToMM Symposium on Mechanism Design for Robotics

    CERN Document Server

    Ceccarelli, Marco

    2015-01-01

    This volume contains the Proceedings of the 3rd IFToMM Symposium on Mechanism Design for Robotics, held in Aalborg, Denmark, 2-4 June, 2015. The book contains papers on recent advances in the design of mechanisms and their robotic applications. It treats the following topics: mechanism design, mechanics of robots, parallel manipulators, actuators and their control, linkage and industrial manipulators, innovative mechanisms/robots and their applications, among others. The book can be used by researchers and engineers in the relevant areas of mechanisms, machines and robotics.

  4. Announced document collection of the 3rd information exchange meeting on radioactive waste disposal research network

    International Nuclear Information System (INIS)

    2008-03-01

    The 3rd meeting on 'Radioactive Waste Disposal Research Network' was held at the Ricotti techno community square of JAEA on September 3 and 4, 2007. The 'Radioactive Waste Disposal Research Network' was established in Interorganization Atomic Energy Research Program under academic collaborative agreement between Japan Atomic Energy Agency and the University of Tokyo. The objective is to bring both research infrastructures and human expertise in Japan to an adequate performance level, thereby contributing to the development of the fundamental research area in the field of radioactive waste disposal. This lecture material is a collection of presentations and discussions during the information exchange meeting. (author)

  5. The 3rd Asia–Pacific Transport Working Group (APTWG) Meeting

    International Nuclear Information System (INIS)

    Jhang, Hogun; Diamond, P.H.; Leconte, M.; Kwon, J.M.; Ida, K.; Tamura, N.; Kosuga, Y.

    2014-01-01

    This conference report summarizes the contributions to and discussions at the 3rd Asia–Pacific Transport Working Group (APTWG) meeting held in Jeju-island, Korea, on 21–24 May 2013. The main objective of the meeting is to develop a predictive understanding of transport mechanisms in magnetically confined fusion plasmas. In an effort to accomplish this objective, four technical working groups were organized under the headings: (1) transport barrier formation and confinement enhancement, (2) 3D effects and Magnetohydrodynamic–turbulence interaction, (3) momentum transport and non-locality and (4) particle/impurity transport and energetic particles. (conference report)

  6. Proceedings of the 3rd NINS symposium on engineering and technology

    International Nuclear Information System (INIS)

    2008-10-01

    The 3rd NINS Symposium on Engineering and Technology was held on 24-25, July 2008 at National Institute for Fusion Science (NIFS), organized by Department of Engineering and Technical Services, NIFS. This Symposium is continuation of an annual series. The 1st one was held on 25-26 July, 2006 organized by National Astronomical Observatory of Japan. The 2nd one was held on 25-26 June, 2007 organized by Institute for Molecular Science. This proceedings is a compilation of papers presented at the symposium. 49 participants from 5 institutes of NINS attended this symposium and 23 papers were presented. (author)

  7. 3rd International Symposium on Big Data and Cloud Computing Challenges

    CERN Document Server

    Neelanarayanan, V

    2016-01-01

    This proceedings volume contains selected papers that were presented in the 3rd International Symposium on Big data and Cloud Computing Challenges, 2016 held at VIT University, India on March 10 and 11. New research issues, challenges and opportunities shaping the future agenda in the field of Big Data and Cloud Computing are identified and presented throughout the book, which is intended for researchers, scholars, students, software developers and practitioners working at the forefront in their field. This book acts as a platform for exchanging ideas, setting questions for discussion, and sharing the experience in Big Data and Cloud Computing domain.

  8. Numerical method to calculate flow-induced vibration in turbulent flow. 3rd Report. Analysis of vortex-induced vibration in an array of elastically supported tubes; Ranryuba ni okeru ryutai kozotai rensei shindo kaiseki shuho no kaihatsu. 3. Kangun ni okeru uzu reiki shindo kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Sadaoka, N.; Umegaki, K. [Hitachi, Ltd., Tokyo (Japan)

    1996-01-25

    A vortex-induced vibration of an array of elastically supported tubes is simulated in two-dimension by using a flow-induced vibration analysis program, which was developed in order to evaluate flow-induced vibration in various components such as heat exchangers. From a comparison of calculated results and experimental data, the following points are observed. (1) For the calculated results in a 5 {times} 5 square array, the flow pattern surrounding the first-row tubes is markedly different from that observed in the second-row or third-row tubes. This flow pattern is the same as that obtained from the experiment. (2) All tubes begin to oscillate due to unsteady fluid force and the oscillating mode is different for each row of tubes. These oscillation patterns show the same tendency in the experiments and it is concluded that the developed method can simulate vortex-induced vibration in an array of elastically supported tubes. 19 refs., 10 figs., 1 tab.

  9. Formal faculty observation and assessment of bedside skills for 3rd-year neurology clerks.

    Science.gov (United States)

    Thompson Stone, Robert; Mooney, Christopher; Wexler, Erika; Mink, Jonathan; Post, Jennifer; Jozefowicz, Ralph F

    2016-11-22

    To evaluate the feasibility and utility of instituting a formalized bedside skills evaluation (BSE) for 3rd-year medical students on the neurology clerkship. A neurologic BSE was developed for 3rd - year neurology clerks at the University of Rochester for the 2012-2014 academic years. Faculty directly observed 189 students completing a full history and neurologic examination on real inpatients. Mock grades were calculated utilizing the BSE in the final grade, and number of students with a grade difference was determined when compared to true grade. Correlation was explored between the BSE and clinical scores, National Board of Medical Examiners (NBME) scores, case complexity, and true final grades. A survey was administered to students to assess their clinical skills exposure and the usefulness of the BSE. Faculty completed and submitted a BSE form for 88.3% of students. There was a mock final grade change for 13.2% of students. Correlation coefficients between BSE score and clinical score/NBME score were 0.36 and 0.35, respectively. A statistically significant effect of BSE was found on final clerkship grade (F 2,186 = 31.9, p neurology clerkship was feasible. Low correlation between BSE score and other evaluations indicated a unique measurement to contribute to student grade. Using real patients with differing case complexity did not alter the grade. © 2016 American Academy of Neurology.

  10. Teaching Newton's 3rd law of motion using learning by design approach

    Science.gov (United States)

    Aquino, Jiezel G.; Caliguid, Mariel P.; Buan, Amelia T.; Magsayod, Joy R.; Lahoylahoy, Myrna E.

    2018-01-01

    This paper presents the process and implementation of Learning by Design Approach in teaching Newton's 3rd Law of Motion. A lesson activity from integrative STEM education was adapted, modified and enhanced through pilot testing. After revisions, the implementation was done to one class. The respondent's prior knowledge was first assessed by a pretest. PPIT (present the scenario, plan, implement and test) was the framework followed in the implementation of Learning by Design. Worksheets were then utilized to measure their conceptual understanding and perception. A score guide was also used to evaluate the student's output. Paired t-test analysis showed that there is a significant difference in the pretest and posttest achievement scores. This implies that the performance of the students have improved during the implementation of the Learning by Design. The Analysis of variance also depicts that the low, average and high benefited in the Learning by Design approach. The results of this study suggests that Learning by Design is an effective approach in teaching Newton's 3rd Law of Motion and thus be used in a Science classroom.

  11. Editorial: 3rd Special Issue on behavior change, health, and health disparities.

    Science.gov (United States)

    Higgins, Stephen T

    2016-11-01

    This Special Issue of Preventive Medicine (PM) is the 3rd that we have organized on behavior change, health, and health disparities. This is a topic of critical importance to improving U.S. population health. There is broad scientific consensus that personal behaviors such as cigarette smoking, other substance abuse, and physical inactivity/obesity are among the most important modifiable causes of chronic disease and its adverse impacts on population health. Hence, effectively promoting health-related behavior change needs to be a key component of health care research and policy. There is also broad recognition that while these problems extend throughout the population, they disproportionately impact economically disadvantaged populations and other vulnerable populations and represent a major contributor to health disparities. Thus, behavior change represents an essential step in curtailing health disparities, which receives special attention in this 3rd Special Issue. We also devote considerable space to the longstanding challenges of reducing cigarette smoking and use of other tobacco and nicotine delivery products in vulnerable populations, obesity, and for the first time food insecurity. Across each of these topics we include contributions from highly accomplished policymakers and scientists to acquaint readers with recent accomplishments as well as remaining knowledge gaps and challenges. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. The Third International Genomic Medicine Conference (3rd IGMC, 2015: overall activities and outcome highlights

    Directory of Open Access Journals (Sweden)

    Muhammad Abu-Elmagd

    2016-10-01

    Full Text Available Abstract The Third International Genomic Medicine Conference (3rd IGMC was organised by the Centre of Excellence in Genomic Medicine Research (CEGMR at the King Abdulaziz University, Jeddah, Kingdom of Saudi Arabia (KSA. This conference is a continuation of a series of meetings, which began with the first International Genomic Medicine Conference (1st IGMC, 2011 followed by the second International Genomic Medicine Conference (2nd IGMC, 2013. The 3rd IGMC meeting presented as a timely opportunity to bring scientists from across the world to gather, discuss, and exchange recent advances in the field of genomics and genetics in general as well as practical information on using these new technologies in different basic and clinical applications. The meeting undoubtedly inspired young male and female Saudi researchers, who attended the conference in large numbers, as evidenced by the oversubscribed oral and poster presentations. The conference also witnessed the launch of the first content for npj Genomic Medicine, a high quality new journal was established in partnership by CEGMR with Springer Nature and published as part of the Nature Partner Journal series. Here, we present a brief summary report of the 2-day meeting including highlights from the oral presentations, poster presentations, workshops, poster prize-winners and comments from the distinguished scientists.

  13. Extreme and Local 3rd Harmonic Response of Niobium (Nb) Superconductor

    Science.gov (United States)

    Oripov, Bakhrom; Tai, Tamin; Anlage, Steven

    Superconducting Radio Frequency (SRF) cavities are being widely used in new generation particle accelerators. These SRF cavities are based on bulk Nb. Based on the needs of the SRF community to identify defects on Nb surfaces, a novel near-field magnetic microwave microscope was successfully built using a magnetic writer from a conventional magnetic recording hard-disk drive1. This magnetic writer can create an RF magnetic field, localized and strong enough to drive Nb into the vortex state. This probe enables us to locate defects through scanning and mapping of the local electrodynamic response in the multi-GHz frequency range. Recent measurements have shown that 3rd harmonic nonlinear response is far more sensitive to variations in input power and temperature then linear response, thus we mainly study the 3rd harmonic response. Moreover, the superconductor is usually the only source for nonlinear response in our setup, thus there is less chance of having noise or background signal. Understanding the mechanism responsible for this non-linear response is important for improving the performance of SRF cavities. Besides Nb we also study various other superconductors such as MgB2 and the cuprate Bi-Sr-Ca-Cu-O (BSCCO) for potential applications in SRF cavities. This work is funded by US Department of Energy through Grant # DE-SC0012036T and CNAM.

  14. 3rd Circuit hints it may reconsider McNemar reasoning.

    Science.gov (United States)

    1997-10-17

    The [name removed] v. The Disney Store ruling is under criticism and the 3rd U.S. Circuit Court of Appeals may reconsider its 1996 decision to not allow employees who receive disability benefits to sue under the Americans with Disabilities Act (ADA). A panel of 3rd Circuit judges, working on [name removed] v. American Sterilizer Co., asserts that the [name removed] decision should not be used to assume that an individual's ADA claims are barred because of prior representations of disability. [Name removed] is suing American Sterilizer under the retaliation provisions of the ADA. Other courts are criticizing the [name removed] decision, including the District of Columbia Court in [name removed] v. Washington Metropolitan Area Transit Authority. The [name removed] court assets that a statement made in the context of a disability application does not preclude an ADA claim brought by a worker for illegal discrimination because the ADA and the Social Security Act differ in their statutory intent. AIDS advocates state that the [name removed] decision places a plaintiff in the position of having to choose between asserting a legal right or maintaining an income. Alan Epstein, who represented [name removed], is pleased by the criticism but explains that [name removed], who died this summer, will not be vindicated.

  15. THE CLINICAL EFFICACY OF FOSFOMYCIN TROMETAMOL VERSUS AMOXICILLIN-CLAVULANIC ACID IN THE TREATMENT OF SYMPTOMATİC AND ASYMPTOMATİC BACTERIURIA IN 3rd TRIMESTER PREGNANCY

    OpenAIRE

    Süleyman Akarsu; Cengiz Kara; Ömer Faruk Bozkurt; Zeynep Çizmeci; Nermin Akdemir; Ali Ünsal

    2010-01-01

    PURPOSE: This study was conducted to assess the clinical efficacy of a single dose of fosfomycin trometamol for the treatment of both asymptomatic and symptomatic bacteriuria in the third trimester of pregnancy compared with a 7-day regimen of amoxicillin-clavulanic acid MATERIAL – METHODS: In this study clinical efficiency of single dose of 3 g fosfomycin trometamol and 7 day 675 mg amoxicillin-clavulanic acid were compared on 85 pregnant women in 3rd trimester with symptomatic and...

  16. Specifications and Construction Methods for Asphalt Concrete and Other Plant-Mix Types, 3rd Edition.

    Science.gov (United States)

    Asphalt Inst., College Park, MD.

    The purpose of this publication is to assist engineers in the analysis, design and control of paving projects that use asphalt concrete and other asphalt plant-mixes. The scope of this new third edition has been enlarged, and changes necessitated by advances in asphalt technology have been incorporated. Chapters I and II and Appendices A and B…

  17. Proceedings of the 3rd Workshop of R and D and technologies on Radioactive Waste management. Vol. 1,2

    International Nuclear Information System (INIS)

    1998-01-01

    The sessions present at the 3rd workshops on radioactive waste management are: 1. Bases for the radioactive waste management 2. Capsule fuel barrier 3. Barriers for engineering 4. Geologic barriers 5. The biosphere as barrier

  18. 3rd Sino-German Conference “Underground Storage of CO2 and Energy”

    CERN Document Server

    Xie, Heping; Were, Patrick

    2013-01-01

    Anthropogenic greenhouse gas emissions, energy security and sustainability are three of the greatest contemporary global challenges today. This year the Sino-German Cooperation Group “Underground Storage of CO2 and Energy”, is meeting on the 21-23 May 2013 for the second time in Goslar, Germany, to convene its 3rd Sino-German conference on the theme “Clean Energy Systems in the Subsurface: Production, Storage and Conversion”.   This volume is a collection of diverse quality scientific works from different perspectives elucidating on the current developments in CO2 geologic sequestration research to reduce greenhouse emissions including measures to monitor surface leakage, groundwater quality and the integrity of caprock, while ensuring a sufficient supply of clean energy. The contributions herein have been structured into 6 major thematic research themes: Integrated Energy and Environmental Utilization of Geo-reservoirs: Law, Risk Management & Monitoring CO2 for Enhanced Gas and Oil Recovery, Coa...

  19. Report of the 3rd European fusion physics workshop, Segovia 13-15 December 1995

    International Nuclear Information System (INIS)

    Todd, T.N.; Jones, T.T.C.; Moreau, D.; Zohm, H.

    1997-01-01

    The 3rd EFPW was convened in December 1995 at Segovia, with the support of Eurotom and CIEMAT. The established pattern for these meetings was followed, beginning with a range of topical themes of interest to the magnetic confinement fusion research community. Subsequent presentations moved on to summarize progress in experiments on JET and the design activity for ITER. The topical theme this year comprised tokamak operational limits, disruption phenomena and transport issues (including the role of plasma edge effects, dimensionless scaling analysers and 'non-local' dependences). Also discussed were tokamak concept improvements, with additional contributions emphasizing the synergistic role of stellarators. JET highlights reported were the achievements of the experiments with the Mk1 divertor, high fusion performance plasmas, and exploratory work on discharge optimization techniques (such as reversed magnetic shear). This article summarizes the proceedings of the workshop on the topical themes and the JET results, including a number of points raised in the associated discussion sessions. (author)

  20. Nonlinear Dynamics of Memristor Based 2nd and 3rd Order Oscillators

    KAUST Repository

    Talukdar, Abdul Hafiz

    2011-05-01

    Exceptional behaviours of Memristor are illustrated in Memristor based second order (Wien oscillator) and third order (phase shift oscillator) oscillator systems in this Thesis. Conventional concepts about sustained oscillation have been argued by demonstrating the possibility of sustained oscillation with oscillating resistance and dynamic poles. Mathematical models are also proposed for analysis and simulations have been presented to support the surprising characteristics of the Memristor based oscillator systems. This thesis also describes a comparative study among the Wien family oscillators with one Memristor. In case of phase shift oscillator, one Memristor and three Memristors systems are illustrated and compared to generalize the nonlinear dynamics observed for both 2nd order and 3rd order system. Detail explanations are provided with analytical models to simplify the unconventional properties of Memristor based oscillatory systems.

  1. Idaho National Laboratory Quarterly Occurrence Analysis - 3rd Quarter FY-2016

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 73 reportable events (23 from the 3rd Qtr FY-16 and 50 from the prior three reporting quarters), as well as 45 other issue reports (including events found to be not reportable and Significant Category A and B conditions) identified at INL during the past 12 months (16 from this quarter and 29 from the prior three quarters).

  2. Quantification of bone mineral density at 3rd lumbar vertebra by dual photon absorptiometry

    International Nuclear Information System (INIS)

    Fukunaga, Masao; Otsuka, Nobuaki; Ono, Shimato; Nagai, Kiyohisa; Muranaka, Akira; Furukawa, Takako; Yanagimoto, Shinichi; Tomomitsu, Tatsushi; Morita, Rikushi

    1987-01-01

    To know bone mineral content of both cortical and spongy bones with aging and pathologic changes, bone mineral density (BMD) in the 3rd lumbar vertebra (L3) and distal radius (DR) was measured using dual photon absorptiometry and single photon absorptiometry, respectively, in 151 normal subjects (N) and four patients with primary hyperparathyroidism (PHP). In the N group, BMD in both L3 and DR decreased with aging. This was more noted, and occurred earlier in L3, irrespective of sex, than DR. In three PHP patients manifested as bone type, BMD was high in L3, and low in DR. Such a tendency was not seen in the remaining one patient with stone type PHP. The findings suggest the need to measure BMD in both cortical (L3) and spongy (DR) bones for elucidating bone pathophysiology in metabolic bone disease. (Namekawa, K.)

  3. The Perception of Entrepreneurial and 3rd Generation University in Turkey

    Directory of Open Access Journals (Sweden)

    Deniz Zungun

    2016-07-01

    Full Text Available Increased competition caused by globalization has led to philosophical changes in private and public businesses. This situation has affected educational institutions and they have needed dynamic, innovator and transformational tools in order to survive in competitive environment. The universities defined as �3rd Generation Universities� need commercialization, network among universities, close co-operation among institutions and entrepreneurship as well as intellectual and innovative changes. In this regard, the aim of the research is formed by the analysis of �Entrepreneur University� concept from the perspective of the academicians that served at managerial positions at the universities in Turkey. The research is limited to the opinions of the academicians that served at top, middle and lower management at randomly chosen 20 universities.

  4. 3rd International Doctoral Symposium on Applied Computation and Security Systems

    CERN Document Server

    Saeed, Khalid; Cortesi, Agostino; Chaki, Nabendu

    2017-01-01

    This book presents extended versions of papers originally presented and discussed at the 3rd International Doctoral Symposium on Applied Computation and Security Systems (ACSS 2016) held from August 12 to 14, 2016 in Kolkata, India. The symposium was jointly organized by the AGH University of Science & Technology, Cracow, Poland; Ca’ Foscari University, Venice, Italy; and the University of Calcutta, India. The book is divided into two volumes, Volumes 3 and 4, and presents dissertation works in the areas of Image Processing, Biometrics-based Authentication, Soft Computing, Data Mining, Next-Generation Networking and Network Security, Remote Healthcare, Communications, Embedded Systems, Software Engineering and Service Engineering. The first two volumes of the book published the works presented at the ACSS 2015, which was held from May 23 to 25, 2015 in Kolkata, India.

  5. Interviews with Michael Baxandall, February 3rd and 4th, 1994, Berkeley, CA

    Directory of Open Access Journals (Sweden)

    Allan Langdale

    2009-12-01

    Full Text Available The following interviews with Michael Baxandall were conducted in Berkeley on February 3rd and 4th of 1994. The content of these interviews include general responses about developments in art history in the years between 1960 and 1985, a period of dramatic modifications in the discipline. Among the issues are the rise of the social history of art and the sources from anthropology that informed Baxandall’s concept of the ‘Period Eye’. Baxandall talks about his own work, his personal intellectual history, and the scholars of past and current generations who influenced him. Other topics include Baxandall’s professional trajectory, the Warburg Library, and aspects of cultural history having to do with Renaissance Humanism. These interviews first appeared as an appendix to the PhD dissertation by Allan Langdale, Art History and Intellectual History: Michael Baxandall’s Work between 1963 and 1985, U. C. Santa Barbara, 1995.

  6. Summary of the 3rd workshop on human resources development (HRD) in FNCA. FY2001

    International Nuclear Information System (INIS)

    2002-07-01

    The Human Resources Development (HRD) Project was added in 1999 to the Cooperation Activities of 'the Forum for Nuclear Cooperation in Asia (FNCA)' which is organized by AEC of Japan. The HRD Project supports to solidify the foundation of nuclear development utilization in Asia by promoting human resources development in Asian countries. The principal activity of the HRD Project is to hold the Workshop on Human Resources Development in the Nuclear Field in Asia once a year. The objective of the Workshop is to clarify problems and needs of the human resources development of each country and to support mutually by exchanging information etc. The report consists of the summary of the 3rd Workshop on Human Resources Development in the Nuclear Field in Asia held on October 29 - November 1, 2001 at the Nuclear Training Center of the Korea Atomic Energy Research Institute in Daejeon, Korea. (author)

  7. Dental health in antique population of Vinkovci - Cibalae in Croatia (3rd-5th century).

    Science.gov (United States)

    Peko, Dunja; Vodanović, Marin

    2016-08-01

    Roman city Cibalae (Vinkovci) - the birthplace of Roman emperors Valentinian I and Valens was a very well developed urban ares in the late antique what was evidenced by numerous archaeological findings. The aim of this paper is to get insight in dental health of antique population of Cibalae. One hundred individuals with 2041 teeth dated to 3rd - 5th century AD have been analyzed for caries, antemortem tooth loss, periapical diseases and tooth wear. Prevalence of antemortem tooth loss was 4.3% in males, 5.2% in females. Prevalence of caries per tooth was 8.4% in males, 7.0% in females. Compared to other Croatian antique sites, ancient inhabitants of Roman Cibalae had rather good dental health with low caries prevalence and no gender differences. Statistically significant difference was found between males in females in the prevalence of periapical lesions and degree of tooth wear. Periapical lesions were found only in males.

  8. 3rd International Asia Conference on Informatics in Control, Automation and Robotics

    CERN Document Server

    Informatics in Control, Automation and Robotics

    2012-01-01

    Session 2 includes 110 papers selected from 2011 3rd International Asia Conference on Informatics in Control, Automation and Robotics (CAR 2011), held on December 24-25, 2011, Shenzhen, China.   As we all know, the ever growing technology in robotics and automation will help build a better human society. This session will provide a unique opportunity for the academic and industrial communities to address new challenges, share solutions, and discuss research directions for the future. Robotics research emphasizes intelligence and adaptability to cope with unstructured environments. Automation research emphasizes efficiency, productivity, quality, and reliability, focusing on systems that operate autonomously. The main focus of this session is on the autonomous acquisition of semantic information in intelligent robots and systems, as well as the use of semantic knowledge to guide further acquisition of information.

  9. 3rd International Summer School Nanotechnology : From Fundamental Research to Innovations

    CERN Document Server

    Yatsenko, Leonid

    2015-01-01

    This book highlights the most recent advances in nanoscience from leading researchers in Ukraine, Europe, and beyond.  It features contributions from participants of the 3rd International Summer School “Nanotechnology: From Fundamental Research to Innovations,” held in Yaremche, Ukraine on August 23-26, 2014 and of the 2nd International NANO-2014 Conference, held in Lviv, Ukraine on August 27-30, 2014.  These events took place within the framework of the European Commission FP7 project Nanotwinning, and were organized jointly by the Institute of Physics of the National Academy of Sciences of Ukraine, University of Tartu (Estonia), University of Turin (Italy), and Pierre and Marie Curie University (France).  Internationally recognized experts from a wide range of universities and research institutions share their knowledge and key results in the areas of nanocomposites and nanomaterials, nanostructured surfaces, microscopy of nano-objects, nano-optics and nanophotonics, nanoplasmonics, nanochemistry, na...

  10. 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Koziel, Slawomir; Kacprzyk, Janusz; Leifsson, Leifur; Ören, Tuncer

    2015-01-01

    This book includes extended and revised versions of a set of selected papers from the 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2013) which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). SIMULTECH 2013 was held in cooperation with the ACM SIGSIM - Special Interest Group (SIG) on SImulation and Modeling (SIM), Movimento Italiano Modellazione e Simulazione (MIMOS) and AIS Special Interest Group on Modeling and Simulation (AIS SIGMAS) and technically co-sponsored by the Society for Modeling & Simulation International (SCS), Liophant Simulation, Simulation Team and International Federation for Information Processing (IFIP). This proceedings brings together researchers, engineers, applied mathematicians and practitioners working in the advances and applications in the field of system simulation.

  11. Analysis of coherence properties of 3-rd generation synchrotron sources and free-electron lasers

    International Nuclear Information System (INIS)

    Vartanyants, I.A.; Singer, A.

    2009-07-01

    A general theoretical approach based on the results of statistical optics is used for the analysis of the transverse coherence properties of 3-rd generation synchrotron sources and X-ray free-electron lasers (XFEL). Correlation properties of the wave elds are calculated at different distances from an equivalent Gaussian Schell-model source. This model is used to describe coherence properties of the five meter undulator source at the synchrotron storage ring PETRA III. In the case of XFEL sources the decomposition of the statistical fields into a sum of independently propagating transverse modes is used for the analysis of the coherence properties of these new sources. A detailed calculation is performed for the parameters of the SASE1 undulator at the European XFEL. It is demonstrated that only a few modes contribute significantly to the total radiation field of that source. (orig.)

  12. 3rd International Conference on Modelling and Management of Engineering Processes

    CERN Document Server

    Gericke, Kilian; Szélig, Nikoletta; Vajna, Sándor

    2015-01-01

    Innovative processes for the development of products and services are more and more considered as an organisational capability, which is recognised to be increasingly important for business success in today’s competitive environment. However, management and academia need a more profound understanding of these processes in order to develop improved management approaches to exploit business potentials. This book contains the proceedings of the 3rd International Conference on Modelling and Management of Engineering Processes (MMEP2013) held in Magdeburg, Germany, in November 2013. It includes contributions from international leading researchers in the fields of process modelling and process management. The conference topics were recent trends in modelling and management of engineering processes, potential synergies between different modelling approaches, future challenges for the management of engineering processes as well as future research in these areas.

  13. Analysis of coherence properties of 3-rd generation synchrotron sources and free-electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Vartanyants, I.A.; Singer, A. [HASYLAB at Deutsches Elektronen-Synchrotron DESY, Hamburg (Germany)

    2009-07-15

    A general theoretical approach based on the results of statistical optics is used for the analysis of the transverse coherence properties of 3-rd generation synchrotron sources and X-ray free-electron lasers (XFEL). Correlation properties of the wave elds are calculated at different distances from an equivalent Gaussian Schell-model source. This model is used to describe coherence properties of the five meter undulator source at the synchrotron storage ring PETRA III. In the case of XFEL sources the decomposition of the statistical fields into a sum of independently propagating transverse modes is used for the analysis of the coherence properties of these new sources. A detailed calculation is performed for the parameters of the SASE1 undulator at the European XFEL. It is demonstrated that only a few modes contribute significantly to the total radiation field of that source. (orig.)

  14. 3rd international KES conference on Smart Education and Smart e-Learning

    CERN Document Server

    Howlett, Robert; Jain, Lakhmi

    2016-01-01

    This book contains the contributions presented at the 3rd international KES conference on Smart Education and Smart e-Learning, which took place in Puerto de la Cruz, Tenerife, Spain, June 15-17, 2016. It contains a total of 56 peer-reviewed book chapters that are grouped into several parts: Part 1 - Smart University: Conceptual Modeling, Part 2 – Smart Education: Research and Case Studies, Part 3 – Smart e-Learning, Part 4 – Smart Education: Software and Hardware Systems, and Part 5 – Smart Technology as a Resource to Improve Education and Professional Training. We believe that the book will serve as a useful source of research data and valuable information for faculty, scholars, Ph.D. students, administrators, and practitioners - those who are interested in innovative areas of smart education and smart e-learning. .

  15. Proceedings of the 3rd international symposium on material chemistry in nuclear environment (MATERIAL CHEMISTRY '02)

    International Nuclear Information System (INIS)

    2003-03-01

    The volume contains all presented papers during the 3rd International Symposium on Material Chemistry in Nuclear Environment: MATERIAL CHEMISTRY 02 (MC'02), held March 13-15, 2002. The purpose of this symposium is to provide an international forum for the discussion of recent progress in the field of materials chemistry in nuclear environments. This symposium intends to build on the success of the previous symposiums held in Tsukuba in 1992 and 1996. The topics discussed in the symposium MC'02 are Chemical Reaction and Thermodynamics, Degradation Phenomena, New Characterization Technology, Fabrication and New Materials, Composite Materials, Surface Modification, and Computational Science. The 61 of the presented papers are indexed individually. (J.P.N.)

  16. Proceedings of the 3rd seminar of R and D on advanced ORIENT (International)

    International Nuclear Information System (INIS)

    Sasaki, Yuji; Ozawa, Masaki

    2010-03-01

    The 3rd Seminar of R and D on advanced ORIENT (International) was held at Tohoku University, on October 30th, 2009 organized by Japan Atomic Energy Agency. The first meeting of this seminar was held at Oarai, Ibaraki on May, 2007, and the second seminar was held at Tokai, Ibaraki on November, 2008. This seminar has the world-wide concept and includes the main topics from foreign researchers. Spent nuclear fuel should be recognized not only mass of radioactive elements but also potentially useful materials including platinum metals and rare earth elements. Taking the cooperation with universities related companies and research institutes, into consideration, we aimed at expanding and progressing the basic researches. This report records abstracts and figures submitted from the oral speakers in this seminar. (author)

  17. 3rd International Arab Forensic Sciences & Forensic Medicine Conference, ASFSFM 2017: Conference Report

    Directory of Open Access Journals (Sweden)

    Abdulsallam A. Bakdash

    2017-12-01

    Full Text Available The Arab Society for Forensic Sciences and Forensic Medicine (ASFSFM at Naif Arab University for Security Sciences seeks to present the latest developments in all fields of forensic sciences through holding specialized scientific events and academic activities. This is also achieved through its periodic scientific peer-reviewed journal, the Arab Journal of Forensic Sciences and Forensic Medicine. It also seeks to promote scientific research in all fields of forensic science and forensic medicine, and seeks actively to contribute in holding scientific meetings in accordance with advanced scientific standards, including the 3rd International Arab Forensic Sciences & Forensic Medicine Conference. This important event was attended by scientists and experts from various fields of criminal and forensic sciences from both Arab and non-Arab countries. This conference was a significant scientific accomplishment that contributed to the advancement of forensic sciences and forensic medicine in the Arab world. The conference aimed, in accordance with the vision of Naif Arab University for Security Sciences, to enhance peace, security and justice in Arab societies.  Naif Arab University for Security Sciences, represented by the Arab Society for Forensic Sciences and Forensic Medicine, held the 3rd International Arab Forensic Sciences & Forensic Medicine Conference on the University's campus during the period from 21st to 23rd November 2017. The event included the participation of more than 720 experts in forensic sciences and forensic medicine from 33 countries all over the world. Experts discussed and presented the latest developments in their fields. The conference provided a creative environment for students from both local and international universities to benefit from experts and specialists, and to access the most recent research.  On behalf of His Excellency the president of Naif Arab University for Security Sciences, and the Arab Society for

  18. Recent developments at 3rd generation storage ring light sources (2/4)

    CERN Multimedia

    CERN. Geneva

    2009-01-01

    Over the last decade, many 3rd generation storage ring light sources have been built and put into operation. Progressively, significant improvements have been brought to the machine performances and experiences developed at the first facilities have benefited to the most recently built ones. Most of the recent facilities are now featuring small emittances, high current together with high position stability. The small sizes of the electron beam at the source points impose achieving position stabilities in the sub micron range. The technology to build the insertion devices that produce the photon beams has reached a very mature state and enables 3 GeV medium energy /medium size machines to produce high brilliance beams up to the hard X-Ray range (10 - 30 keV). The designing of the optical set-up of a beamline includes now the choice of the best suited undulator. All these facilities are operated as “photon factories” and deliver their beams to many beamlines over several thousands hours per year. Some re...

  19. Recent developments at 3rd generation storage ring light sources (4/4)

    CERN Multimedia

    CERN. Geneva

    2009-01-01

    Over the last decade, many 3rd generation storage ring light sources have been built and put into operation. Progressively, significant improvements have been brought to the machine performances and experiences developed at the first facilities have benefited to the most recently built ones. Most of the recent facilities are now featuring small emittances, high current together with high position stability. The small sizes of the electron beam at the source points impose achieving position stabilities in the sub micron range. The technology to build the insertion devices that produce the photon beams has reached a very mature state and enables 3 GeV medium energy /medium size machines to produce high brilliance beams up to the hard X-Ray range (10 - 30 keV). The designing of the optical set-up of a beamline includes now the choice of the best suited undulator. All these facilities are operated as “photon factories” and deliver their beams to many beamlines over several thousands hours per year. Some re...

  20. Recent developments at 3rd generation storage ring light sources (3/4)

    CERN Multimedia

    CERN. Geneva

    2009-01-01

    Over the last decade, many 3rd generation storage ring light sources have been built and put into operation. Progressively, significant improvements have been brought to the machine performances and experiences developed at the first facilities have benefited to the most recently built ones. Most of the recent facilities are now featuring small emittances, high current together with high position stability. The small sizes of the electron beam at the source points impose achieving position stabilities in the sub micron range. The technology to build the insertion devices that produce the photon beams has reached a very mature state and enables 3 GeV medium energy /medium size machines to produce high brilliance beams up to the hard X-Ray range (10 - 30 keV). The designing of the optical set-up of a beamline includes now the choice of the best suited undulator. All these facilities are operated as “photon factories” and deliver their beams to many beamlines over several thousands hours per year. Some re...

  1. Recent developments at 3rd generation storage ring light sources (1/4)

    CERN Multimedia

    CERN. Geneva

    2009-01-01

    Over the last decade, many 3rd generation storage ring light sources have been built and put into operation. Progressively, significant improvements have been brought to the machine performances and experiences developed at the first facilities have benefited to the most recently built ones. Most of the recent facilities are now featuring small emittances, high current together with high position stability. The small sizes of the electron beam at the source points impose achieving position stabilities in the sub micron range. The technology to build the insertion devices that produce the photon beams has reached a very mature state and enables 3 GeV medium energy /medium size machines to produce high brilliance beams up to the hard X-Ray range (10 - 30 keV). The designing of the optical set-up of a beamline includes now the choice of the best suited undulator. All these facilities are operated as “photon factories” and deliver their beams to many beamlines over several thousands hours per year. Some re...

  2. Proceedings of the 3rd topical meeting on FEL and high power radiation

    International Nuclear Information System (INIS)

    Hiramatsu, Shigenori

    1994-01-01

    The meeting was held on June 10 and 11, 1993, at the National Laboratory for High Energy Physics. This is the joint study meeting with 31st large power microwave-milliwave study meeting. At the meeting, lectures were given on the report of 1st Asia FEL study meeting, infrared free electron laser (FEL) project in JAERI, present state of Free Electron Laser Research Institute Inc., infrared FEL experiment in the Institute of Scientific and Industrial Research, Osaka University, FEL experiment in UVSOR storage ring, NIJI-4 SRFEL, simulation of FEL oscillation in photo-klystron, vacuum UVFEL in PF, beam characteristics of small photon storage ring, micro-cherenkov FEL using field emission array, coherent spontaneous emission and radiation build-up in FEL oscillator, stability of soft X-ray multilayers under exposure to multipole Wigger radiation, long life Zn 2 excimer excited with relativistic electron beam, development of large power klystron in KEK, design of 1 THz gyrotron and first experiment, experiment of relativistic peniotron, experiments of 3rd and 10th cyclotron harmonic peniotron oscillators and others. (K.I.)

  3. The 3rd ATLAS Domestic Standard Problem for Improvement of Safety Analysis Technology

    International Nuclear Information System (INIS)

    Choi, Ki-Yong; Kang, Kyoung-Ho; Park, Yusun; Kim, Jongrok; Bae, Byoung-Uhn; Choi, Nam-Hyun

    2014-01-01

    The third ATLAS DSP (domestic standard problem exercise) was launched at the end of 2012 in response to the strong need for continuation of the ATLAS DSP. A guillotine break of a main steam line without LOOP at a zero power condition was selected as a target scenario, and it was successfully completed in the beginning of 2014. In the 3 rd ATLAS DSP, comprehensive utilization of the integral effect test data was made by dividing analysis with three topics; 1. scale-up where extrapolation of ATLAS IET data was investigated 2. 3D analysis where how much improvement can be obtained by 3D modeling was studied 3. 1D sensitivity analysis where the key phenomena affecting the SLB simulation were identified and the best modeling guideline was achieved. Through such DSP exercises, it has been possible to effectively utilize high-quality ATLAS experimental data of to enhance thermal-hydraulic understanding and to validate the safety analysis codes. A strong human network and technical expertise sharing among the various nuclear experts are also important outcomes from this program

  4. Effects of notetaking instruction on 3rd grade student's science learning and notetaking behavior

    Science.gov (United States)

    Lee, Pai-Lin

    The research examined effects of notetaking instruction on elementary-aged students' ability to recall science information and notetaking behavior. Classes of 3rd grade students were randomly assigned to three treatment conditions, strategic notetaking, partial strategic notetaking, and control, for 4 training sessions. The effects of the notetaking instruction were measured by their performances on a test on science information taught during the training, a long-term free recall of the information, and number of information units recalled with or without cues. Students' prior science achievement was used to group students into two levels (high vs. low) and functioned as another independent variable in analysis. Results indicated significant treatment effect on cued and non-cued recall of the information units in favor of the strategy instruction groups. Students with higher prior achievement in science performed better on cued recall and long-term free recall of information. The results suggest that students as young as at the third grade can be instructed to develop the ability of notetaking that promotes their learning.

  5. A critical experimental test of synchrotron radiation theory with 3rd generation light source

    Energy Technology Data Exchange (ETDEWEB)

    Geloni, Gianluca [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2016-05-15

    A recent ''beam splitting'' experiment at LCLS apparently demonstrated that after a microbunched electron beam is kicked on a large angle compared to the divergence of the FEL radiation, the microbunching wave front is readjusted along the new direction of motion of the kicked beam. Therefore, coherent radiation from an undulator placed after the kicker is emitted along the kicked direction without suppression. This strong emission of coherent undulator radiation in the kicked direction cannot be explained in the framework of conventional synchrotron radiation theory. In a previous paper we explained this puzzle. We demonstrated that, in accelerator physics, the coupling of fields and particles is based, on the one hand, on the use of results from particle dynamics treated according to the absolute time convention and, on the other hand, on the use of Maxwell equations treated according to the standard (Einstein) synchronization convention. Here lies the misconception which led to the strong qualitative disagreement between theory and experiment. After the ''beam splitting'' experiment at LCLS, it became clear that the conventional theory of synchrotron radiation cannot ensure the correct description of coherent and spontaneous emission from a kicked electron beam, nor the emission from a beam with finite angular divergence, in an undulator or a bending magnet. However, this result requires further experimental confirmation. In this publication we propose an uncomplicated and inexpensive experiment to test synchrotron radiation theory at 3rd generation light sources.

  6. A critical experimental test of synchrotron radiation theory with 3rd generation light source

    International Nuclear Information System (INIS)

    Geloni, Gianluca; Kocharyan, Vitali; Saldin, Evgeni

    2016-05-01

    A recent ''beam splitting'' experiment at LCLS apparently demonstrated that after a microbunched electron beam is kicked on a large angle compared to the divergence of the FEL radiation, the microbunching wave front is readjusted along the new direction of motion of the kicked beam. Therefore, coherent radiation from an undulator placed after the kicker is emitted along the kicked direction without suppression. This strong emission of coherent undulator radiation in the kicked direction cannot be explained in the framework of conventional synchrotron radiation theory. In a previous paper we explained this puzzle. We demonstrated that, in accelerator physics, the coupling of fields and particles is based, on the one hand, on the use of results from particle dynamics treated according to the absolute time convention and, on the other hand, on the use of Maxwell equations treated according to the standard (Einstein) synchronization convention. Here lies the misconception which led to the strong qualitative disagreement between theory and experiment. After the ''beam splitting'' experiment at LCLS, it became clear that the conventional theory of synchrotron radiation cannot ensure the correct description of coherent and spontaneous emission from a kicked electron beam, nor the emission from a beam with finite angular divergence, in an undulator or a bending magnet. However, this result requires further experimental confirmation. In this publication we propose an uncomplicated and inexpensive experiment to test synchrotron radiation theory at 3rd generation light sources.

  7. Hypertrophic osteoarthropathy in a young adult male from Berber, Sudan (2nd-3rd century CE).

    Science.gov (United States)

    Binder, M; Saad, M

    2017-09-01

    Hypertrophic osteoarthropathy (HOA) is a pathological condition characterised by extensive periosteal new bone formation (NBF) on the diaphyses of the long bones, metacarpal and metatarsal bones. In modern clinical contexts, the secondary form of the disease is common and most often occurs secondary to intra-thoracic cancer and other forms of chronic pulmonary disease. Paleopathological evidence for HOA on the other hand has only occasionally been reported. Here we report a young adult male from the Meriotic cemetery at Berber in Sudan (2nd-3rd century CE) displaying widespread NBF on the diaphyses of the upper and lower limb bones, metacarpal and metatarsal bones, as well as the pelvis and scapulae. While several pathological conditions have to be considered as differential diagnostic options for NBF in the post-cranial skeleton, HOA is the most likely diagnosis, based on the distribution of the changes observed in this individual, as well as their macroscopic and radiographic characteristics. A chronic pulmonary condition as indicated by NBF on the visceral side of the ribs may represent the underlying cause for the HOA. This individual represents the first paleopathological case of HOA reported from an archaeological site in Africa. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Visual, Critical, and Scientific Thinking Dispositions in a 3rd Grade Science Classroom

    Science.gov (United States)

    Foss, Stacy

    Many American students leave school without the required 21st century critical thinking skills. This qualitative case study, based on the theoretical concepts of Facione, Arheim, and Vygotsky, explored the development of thinking dispositions through the arts in science on the development of scientific thinking skills when used as a conceptual thinking routine in a rural 3rd grade classroom. Research questions examined the disposition to think critically through the arts in science and focused on the perceptions and experiences of 25 students with the Visual Thinking Strategy (VTS) process. Data were collected from classroom observations (n = 10), student interviews (n = 25), teacher interviews ( n = 1), a focus group discussion (n = 3), and artifacts of student work (n = 25); these data included perceptions of VTS, school culture, and classroom characteristics. An inductive analysis of qualitative data resulted in several emergent themes regarding disposition development and students generating questions while increasing affective motivation. The most prevalent dispositions were open-mindedness, the truth-seeking disposition, the analytical disposition, and the systematicity disposition. The findings about the teachers indicated that VTS questions in science supported "gradual release of responsibility", the internalization of process skills and vocabulary, and argumentation. This case study offers descriptive research that links visual arts inquiry and the development of critical thinking dispositions in science at the elementary level. A science curriculum could be developed, that emphasizes the development of thinking dispositions through the arts in science, which in turn, could impact the professional development of teachers and learning outcomes for students.

  9. Regional apparent diffusion coefficient values in 3rd trimester fetal brain

    International Nuclear Information System (INIS)

    Hoffmann, Chen; Weisz, Boaz; Lipitz, Shlomo; Katorza, Eldad; Yaniv, Gal; Bergman, Dafi; Biegon, Anat

    2014-01-01

    Apparent diffusion coefficient (ADC) values in the developing fetus can be used in the diagnosis and prognosis of prenatal brain pathologies. To this end, we measured regional ADC in a relatively large cohort of normal fetal brains in utero. Diffusion-weighted imaging (DWI) was performed in 48 non-sedated 3rd trimester fetuses with normal structural MR imaging results. ADC was measured in white matter (frontal, parietal, temporal, and occipital lobes), basal ganglia, thalamus, pons, and cerebellum. Regional ADC values were compared by one-way ANOVA with gestational age as covariate. Regression analysis was used to examine gestational age-related changes in regional ADC. Four other cases of CMV infection were also examined. Median gestational age was 32 weeks (range, 26-33 weeks). There was a highly significant effect of region on ADC, whereby ADC values were highest in white matter, with significantly lower values in basal ganglia and cerebellum and the lowest values in thalamus and pons. ADC did not significantly change with gestational age in any of the regions tested. In the four cases with fetal CMV infection, ADC value was associated with a global decrease. ADC values in normal fetal brain are relatively stable during the third trimester, show consistent regional variation, and can make an important contribution to the early diagnosis and possibly prognosis of fetal brain pathologies. (orig.)

  10. Regional apparent diffusion coefficient values in 3rd trimester fetal brain

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, Chen [Tel Aviv University, Department of Radiology, Sheba Medical Center, Tel Hashomer (affiliated to the Sackler School of Medicine), Tel Aviv (Israel); Sheba Medical Center, Diagnostic Imaging, 52621, Tel Hashomer (Israel); Weisz, Boaz; Lipitz, Shlomo; Katorza, Eldad [Tel Aviv University, Department of Obstetrics and Gynecology, Sheba Medical Center, Tel Hashomer (affiliated to the Sackler School of Medicine), Tel Aviv (Israel); Yaniv, Gal; Bergman, Dafi [Tel Aviv University, Department of Radiology, Sheba Medical Center, Tel Hashomer (affiliated to the Sackler School of Medicine), Tel Aviv (Israel); Biegon, Anat [Stony Brook University School of Medicine, Department of Neurology, Stony Brook, NY (United States)

    2014-07-15

    Apparent diffusion coefficient (ADC) values in the developing fetus can be used in the diagnosis and prognosis of prenatal brain pathologies. To this end, we measured regional ADC in a relatively large cohort of normal fetal brains in utero. Diffusion-weighted imaging (DWI) was performed in 48 non-sedated 3rd trimester fetuses with normal structural MR imaging results. ADC was measured in white matter (frontal, parietal, temporal, and occipital lobes), basal ganglia, thalamus, pons, and cerebellum. Regional ADC values were compared by one-way ANOVA with gestational age as covariate. Regression analysis was used to examine gestational age-related changes in regional ADC. Four other cases of CMV infection were also examined. Median gestational age was 32 weeks (range, 26-33 weeks). There was a highly significant effect of region on ADC, whereby ADC values were highest in white matter, with significantly lower values in basal ganglia and cerebellum and the lowest values in thalamus and pons. ADC did not significantly change with gestational age in any of the regions tested. In the four cases with fetal CMV infection, ADC value was associated with a global decrease. ADC values in normal fetal brain are relatively stable during the third trimester, show consistent regional variation, and can make an important contribution to the early diagnosis and possibly prognosis of fetal brain pathologies. (orig.)

  11. 3rd symposium on tires and chassis; 3. Symposium Reifen und Fahrwerk

    Energy Technology Data Exchange (ETDEWEB)

    Geringer, B.; Stumpf, H. (comps.)

    2005-07-01

    The present volume contains the talks, which were held at the 3rd symposium on ''Tires and chassis'' at the Institute for combustion machines at the Technical University Vienna on 26th September 2005 in cooperation with UAMTTC and Semperit Reifen Ges.m.H. Apart from technical improvements on chassis, tires and carriageway the overall perspective will get more important in the future, which also includes the driver, the neighbour, the environment and the traffic policy. Due to an increasing number of international participants, discussions can be expected, which will take into consideration extraordinary and manifold perspectives. The third symposium on ''Tires and chassis'' discusses the following developments, of which some are evolutionary. (a) Tire engineering; environmental aspects of tires, roll resistance of tires, driving comfort of tires, winter tires for passenger vehicles and trucks. (b) vehicle engineering, engineering of a race car chassis by means of telemetric measuring data acquisition; simulation of steering wheel vibrations on a complete vehicle test stand. (c) Vehicle steering; chassis of tracklaying vehicles; automatic air pressure control. (orig.)

  12. Book Review: Guide to computer forensics and investigations (3rd ed.

    Directory of Open Access Journals (Sweden)

    Keyu Jiang

    2008-09-01

    Full Text Available Nelson, B., Phillips, A., Enfinger, F., & Steuart, C. (2008. Guide to computer forensics and investigations (3rd ed.. New Jersey: Pearson Education, Inc. 693 pages, ISBN: 1-4180-6733-4 (paper.Reviewed by Keyu Jiang (kjiang@fhsu.edu and Ruifeng Xuan (r_xuan@scatcat.fhsu.edu, Department of Information Networking and Telecommunications, Fort Hays State University, Hays, KS 67601Nelson, Phillips, Enfinger, and Steuart’s book is about the science of computer forensics and its implications in crime investigations. This book is not intended to provide comprehensive training in computer forensics, but introduce the science the science of computer forensics and its implications in crime investigations.  It focused on establishing a solid foundation for those who are new to this field.  Nelson, Philips, Enfiger, and Steuart are experienced experts in different areas of computer forensics.  Different expertise makes this book could benefit many groups of people at different educational level and industrial background.(see PDF for full review

  13. The 2001 activities and the 3rd workshop of the human resources development project in FNCA

    International Nuclear Information System (INIS)

    2002-07-01

    In 1999, the Project for Human Resources Development (HRD) was initiated as defined in the framework of the Forum for Nuclear Cooperation in Asia (FNCA), organized by the Atomic Energy Commission of Japan. The objective of the HRD Project is to solidify the foundation of technologies for nuclear development and utilization in Asia by promoting human resources development in Asian countries. In the Project are two kinds of activity; In-workshop activity and Outside-of-workshop activity. The 3rd Workshop on Human Resources Development in the Nuclear Field was held on October 29 to November 1, at the Nuclear Training Center of KAERI. Participating countries were China, Indonesia, Republic of Korea, Japan, Malaysia, the Philippines, Thailand, and Vietnam. The secretariat for the Human Resources Development Project is provided by the Nuclear Training Center of the Korea Atomic Energy Research Institute and the Nuclear Technology and Education Center of the Japan Atomic Energy Research Institute. This report consists of presentation papers and materials at the Workshop as In-Workshop Activity, a document of project review on Human Resources Development for the fourth Coordinators Meeting of FNCA at Tokyo on March, 2002, a letter of proposal from the Project Leader of Japan to the project leaders of the participating countries, and training materials of participating countries as Outside-Workshop Activity. (author)

  14. 3rd International Conference on Energy Equipment Science and Engineering (ICEESE 2017)

    Science.gov (United States)

    2018-03-01

    PREFACE On behalf of the organizing committee of the 2017 3rd International Conference on Energy Equipment Science and Engineering (ICEESE 2017), I would like to express a warm “Thank You” to all the participants, for their important contribution they brought to the Conference! I strongly appreciate the contribution of the authors, who submitted valuable papers and agreed to do successive revisions of their papers, following the recommendations received from the reviewers. ICEESE 2017 was held in Beijing, China during December28-31, 2017, which was organized by Wuhan University and Guizhou Minzu University. The conference provides a useful and wide platform both for display the latest research and for exchange of research results and thoughts in Energy Equipment Science and Engineering. The participants of the conference were from almost every part of the world, with background of either academia or industry, even well-known enterprise. The success and prosperity of the conference is reflected high level of the papers received. List of Committees available in this pdf.

  15. 3rd International Conference on Opto-Electronics and Applied Optics

    CERN Document Server

    Chakrabarti, Satyajit; Reehal, Haricharan; Lakshminarayanan, Vasudevan

    2017-01-01

    The Proceedings of 3rd International Conference on Opto-Electronics and Applied Optics, OPTRONIX 2016 is an effort to promote and present the research works by scientists and researchers including students in India and abroad in the area of Green Photonics and other related areas as well as to raise awareness about the recent trends of research and development in the area of the related fields. The book has been organized in such a way that it will be easier for the readers to go through and find out the topic of their interests. The first part includes the Keynote addresses by Rajesh Gupta, Department of Energy Science and Engineering, Indian Institute of Technology, Bombay; P.T. Ajith Kumar, President and Leading Scientist Light Logics Holography and Optics, Crescent Hill, Trivandrum, Kerala; and K.K. Ghosh, Institute of Engineering & Management, Kolkata, India.  The second part focuses on the Plenary and Invited Talks given by eminent scientists namely, Vasudevan Lakshminarayanan, University of Wate...

  16. The 3^rd International Conference on Women in Physics: Global Perspectives, Common Concerns, Worldwide Views

    Science.gov (United States)

    Zastavker, Yevgeniya V.

    2009-03-01

    The 3^rd International Conference on Women in Physics (ICWIP), held in Seoul, Korea, in October 2008, brought together 300 participants from 57 countries, including a diverse 22-member U.S. Delegation, for a 3-day summit of stimulating discussions, thought-provoking presentations, inspirational posters, and networking. Held under the auspices of the Working Group on Women in Physics of the International Union of Pure and Applied Physics (IUPAP), this meeting built on the successes of the 1^st (Paris, 2002) and 2^nd (Rio de Janeiro, 2005) Conferences and further clarified the importance of diversifying the field of physics worldwide. Although considerable progress has been made since 2002, it was clear that the global scientific workforce is still under-utilizing a large percentage of the available female talent pool. If human society is to benefit to its fullest from various contributions that the field of physics can offer in addressing global issues of economic crisis, energy, environment, water, health, poverty, and hunger, women of all races and nationalities need to become fully included and engaged in the national and international physical community. To address these and many other issues, the ICWIP unanimously approved a five-part resolution to IUPAP recommending actions to promote the recruitment, retention, and advancement of women in physics and related fields.

  17. [Methodology for an appreciative, dynamic and collaborative process: 3rd Canary Islands (Spain) Health Plan].

    Science.gov (United States)

    O'Shanahan Juan, José Joaquín; Hernández Rodríguez, Miguel Ángel; Del Otero Sanz, Laura; Henríquez Suárez, José Andrés; Mahtani Chugani, Vinita

    The need for new approaches to strategic planning by incorporating the perspectives of professionals and inhabitants has led to a new model for the 3rd Canary Islands (Spain) Health Plan (IIIPSC). A dual-phase participatory process using qualitative techniques is proposed: 1) local phase: a quantitative and qualitative study based on training and a research-action-participation initiative; and 2) insular phase: health conferences with face-to-face discussion of results in each health area (island) and proposals for action. The process prioritises problems and establishes a specific action plan for each island through initiatives that are considered to be viable, grouped by themes and weighted according to the potential impact on priority problems. This process of interaction may help to guide planning model changes and health policy decision-making, and was included in the IIIPSC Project for its parliamentary procedure. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  18. The 3rd questionnaire report of safety control on instrument in nuclear medicine laboratory

    International Nuclear Information System (INIS)

    1994-01-01

    The present 3rd survey was aimed at grasping safety control in nuclear medicine examination and the trend for SPECT usage. Questionnaires were sent to 1238 facilities dealing with nuclear medicine; and 1127 facilities (91.0%) responded. The survey period was three years from April 1, 1989 through March 31, 1992. The following 7 items were surveyed: (1) nuclear medicine personnel, (2) nuclear medicine equipments, (3) accidents occurring in nuclear medicine laboratories, (4) risk factors leading to accidents, (5) countermeasures for improving safety control, (6) major breakdown of the machinery and equipment, and (7) demands for makers. Majority of nuclear medicine personnel were male and were less than 50 years old. The number of SPECT equipments increased from 714 in the previous survey to 968. Accidents (personal injuries) and narrow escape from an accident were seen in 45 and 154 cases. Personal injuries such as falling occurred in 37 patients and 8 nuclear medicine personnel. According to nuclear medicine examinations, SPECT was the most common examination associated with accident and narrow escape cases (86/199). Such cases at the beginning of examination were remarkably decreased, as compared with those in the previous two surveys. Accidents were primarily attributable to careless management by personnel. Breakdown of the machinery and equipment was reported in 207 cases. In Item 5, the following contents were presented: heads for examination, personnel's behavior, education, examination equipments, collimators and others. Finally, contents in Item 7 included: equipment design, heads for examination, maintenance or management, data processing, collimators, examination equipments and others. (N.K.)

  19. Overview of the 3rd phase crossover research on migration of radionuclides in biosphere

    International Nuclear Information System (INIS)

    Uchida, Shigeo; Amano, Hikaru; Chiba, Masaru; Hisamatsu, Shun'ichi; Enomoto, Shuichi; Matsumoto, Shiro

    2003-01-01

    In 1991, we started a series of projects in Nuclear Energy Generic Crossover Research, which is known as ''Crossover Research (CR)''. This 1st phase was successfully finished with the active cooperation of five organizations: Japan Atomic Energy Research Institute (JAERI), Meteorological Research Institute (MRI), National Institute of Radiological Sciences (NIRS), the Institute of Physical and Chemical Research (RIKEN) and Power Reactor and Nuclear Fuel Development Corporation (PNC). Subsequently we carried out the 2nd phase of CR (1996-1998). A new member, Institute for Environmental Sciences (IES) participated from this phase. In the 3rd phase CR, a project on ''Development of a dynamic transfer model of radionuclides in the soil ecosphere'', is currently being promoted (1999-2003). The following five researches are carried out in this project. (1) Research into the forms of existence of nuclide and their change in the soil (NIRS and JAERI), (2) Research into the transition behavior of radionuclides in plants (IES, RIKEN and NIRS), (3) Research into the relation to the microorganism and on environmental remediation (RIKEN, JAERI and NIRS), (4) Research on the migration of radionuclides from atmosphere to soil and plant (MRI and JAERI), and (5) Database construction on transfer parameters (JAERI, NIRS and MRI). Then, JAERI, MRI and NIRS are working on the development of a dynamic transfer model for radionuclides on the basis of a gained knowledge about the environmental behavior with the cooperation of universities, etc. The dynamic transfer model developed in this project is effective not only for Japan, but also for the Southeast Asian countries. Besides, this model is capable of predicting the behavior of materials that are harmful to the environment, i.e. hazardous heavy metals discharged in the soil ecosphere. (author)

  20. Visual Arts Teaching in Kindergarten through 3rd-Grade Classrooms in the UAE: Teacher Profiles, Perceptions, and Practices

    Science.gov (United States)

    Buldu, Mehmet; Shaban, Mohamed S.

    2010-01-01

    This study portrayed a picture of kindergarten through 3rd-grade teachers who teach visual arts, their perceptions of the value of visual arts, their visual arts teaching practices, visual arts experiences provided to young learners in school, and major factors and/or influences that affect their teaching of visual arts. The sample for this study…

  1. Constancy and Variability: Dialogic Literacy Events as Sites for Improvisation in Two 3rd-Grade Classrooms

    Science.gov (United States)

    Jordan, Michelle E.; Santori, Diane

    2015-01-01

    This multisite study investigates dialogic literacy events that revolved around narrative and informational texts in two 3rd-grade classrooms. The authors offer a metaphor of musical improvisation to contemplate dialogic literacy events as part of the repertoire of teaching and learning experiences. In literacy learning, where there is much…

  2. Influence of the 1st, 2nd and 3rd harmonic magnetic field in mini-cyclotron

    International Nuclear Information System (INIS)

    Lu xiangshun; Chen Maobai; Li Deming; Xu Senlin

    1996-01-01

    The influence of the 1st, 2nd and 3rd harmonic magnetic field on particle's movement in the mini-cyclotron has been studied. The permitted upper limits for each harmonic part are calculated. These data provide a theoretical reference for magnetic trimming

  3. Analyzing Entrepreneurship Skill Levels of the 3rd Grade Primary School Students in Life Sciences Course Based on Different Variables

    Science.gov (United States)

    Polat, Hüseyin

    2018-01-01

    The purpose of this study is to investigate Life Sciences course entrepreneurship skills of the 3rd grade primary school students as evaluated by their parents. The study was conducted with the screening model. The participants of the study were the parents (47 mothers and 23 fathers) of the students (32 girls, 38 boys) who study in the center of…

  4. Business process management : 3rd international conference, BPM 2005, Nancy, France, September 5-8, 2005 : proceedings

    NARCIS (Netherlands)

    Aalst, van der W.M.P.; Benatallah, B.; Casati, F.; Curbera, F.

    2005-01-01

    This volume contains the proceedings of the 3rd International Conference on Business Process Management (BPM 2005), organized by LORIA in Nancy, France, September 5–8, 2005. This year, BPM included several innovations with respect to previous editions, most notably the addition of an industrial

  5. Conference proceedings of the 2nd and 3rd Regional Innovation & Entrepreneurship Conference : at Saxion University of applied sciences

    NARCIS (Netherlands)

    Bazen, J.J. (Jacques); Hammer, M.H.M. (Matthijs)

    2016-01-01

    DOI:https://doi.org/10.14261/postit/F20ECDBA-3106-4133-9EE0714DBAA65B51 In 2015 and 2016, Saxion University of Applied Sciences organized the 2nd and 3rd edition of the Regional Innovation and Entrepreneurship Conference (RIEC). The book that is in front of you now is the result of these two

  6. SESAME — A 3rd Generation Synchrotron Light Source for the Middle East

    Science.gov (United States)

    Å°lkü, Dinçer; Rahighi, Javad; Winick, Herman

    2007-01-01

    SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) will be the Middle East's first international research center. It is a cooperative venture by the scientists and governments of the region with founding members Bahrain, Egypt, Israel, Jordan, Pakistan, Palestine Authority, and Turkey. Iran is in the process of finalizing its formal membership. Other countries (Cyprus, Morocco, and the United Arab Emirates) are also expected to join. The permanent Council of member states has full responsibility for the project. Members provide the annual operating budget. Observer countries are Germany, Greece, Italy, Kuwait, Portugal, Russian Federation, Sweden, the UK, and the US. SESAME is being developed under the umbrella of UNESCO. Jordan was selected as the building site. SESAME will offer excellent opportunities for training of Middle East scientists and attract those working abroad to consider returning. SESAME will be a 2.5GeV 3rd Generation light source (emittance 26nm-rad, circumference ˜133m), providing excellent performance for structural molecular biology, molecular environmental science, surface and interface science, microelectromechanical devices, x-ray imaging, archaeological microanalysis, and materials characterization. It will cover a broad spectral range from the infrared to hard x-rays and will have 12 straight sections for insertion devices (average length 2.75m). The injector will be the BESSY I 0.8 GeV booster synchrotron which has been given as a gift from Germany. Four committees advise the Council and assist in developing the technical design, beam lines, user community, and scientific Program. The SESAME building, now in construction with funds and a site provided by Jordan, is scheduled for completion in late 2006 after which the BESSY I injector will be installed. First stored beam in the new 2.5 GeV ring is planned for 2009 with six initial beamlines planned. Some beamlines will be built by member countries

  7. SESAME - A 3rd Generation Synchrotron Light Source for the Middle East

    Science.gov (United States)

    U˝Lkü, Dinçer; Rahighi, Javad; Winick, Herman

    2007-01-01

    SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) will be the Middle East's first international research center. It is a cooperative venture by the scientists and governments of the region with founding members Bahrain, Egypt, Israel, Jordan, Pakistan, Palestine Authority, and Turkey. Iran is in the process of finalizing its formal membership. Other countries (Cyprus, Morocco, and the United Arab Emirates) are also expected to join. The permanent Council of member states has full responsibility for the project. Members provide the annual operating budget. Observer countries are Germany, Greece, Italy, Kuwait, Portugal, Russian Federation, Sweden, the UK, and the US. SESAME is being developed under the umbrella of UNESCO. Jordan was selected as the building site. SESAME will offer excellent opportunities for training of Middle East scientists and attract those working abroad to consider returning. SESAME will be a 2.5GeV 3rd Generation light source (emittance 26nm-rad, circumference ~133m), providing excellent performance for structural molecular biology, molecular environmental science, surface and interface science, microelectromechanical devices, x-ray imaging, archaeological microanalysis, and materials characterization. It will cover a broad spectral range from the infrared to hard x-rays and will have 12 straight sections for insertion devices (average length 2.75m). The injector will be the BESSY I 0.8 GeV booster synchrotron which has been given as a gift from Germany. Four committees advise the Council and assist in developing the technical design, beam lines, user community, and scientific Program. The SESAME building, now in construction with funds and a site provided by Jordan, is scheduled for completion in late 2006 after which the BESSY I injector will be installed. First stored beam in the new 2.5 GeV ring is planned for 2009 with six initial beamlines planned. Some beamlines will be built by member countries

  8. The 3rd International Conference on Mathematics, Science and Education 2016

    International Nuclear Information System (INIS)

    2017-01-01

    The 3 rd International Conference of Mathematics, Science, and Education (ICMSE) 2016 on Semarang, 3-4 September 2016 organized by Faculty of Mathematics and Natural Science, Semarang State University. ICMSE2016 provides a platform to the researchers, experts and practitioners from academia, governments, NGOs, research institutes, and industries to meet and share cutting-edge progress in the fields of mathematics and natural science. It is reflected in this year theme “Contribution of Mathematics and Science Research for Sustainable Life in Facing Global Challenge”. The scope of this conference are Mathematics, Biology, Chemistry, and Physics,We thank to the keynote speakers and all authors of the contributed papers, for the cooperation rendered to us in the publication of the conference proceedings. In particular, we would like to place on record our thanks to the expert reviewers who have spared their time reviewing the papers. We also highly appreciate the assistance offered by many volunteers in the preparation of the conference proceedings, and of course to the sponsors assisting in funding this conference, especially Research, Technology and Higher Education Ministry of Indonesia for supporting this conference.The committee selected 71 papers from 129 papers presented in this forum to be published in Journal of Physics: Conference Series (Institute of Physics Publisher) indexed by Scopus. We hope that this program will further stimulate research in Mathematics, Science, and Education; share research interest and information; and create a forum of collaboration and build trust relationship. We feel honored and privileged to serve the best recent developments in the field of Mathematics and Science Education to you through this exciting program.Chairperson,Dr. Margareta RahayuningsihCOMMITTEEInternational Scientific Advisory BoardEdy Cahyono ( Chemistry Department, State University of Semarang )Rahim Sahar ( Department of Physics, Universiti Teknologi

  9. SESAME - A 3rd Generation Synchrotron Light Source for the Middle East

    International Nuclear Information System (INIS)

    Ulkue, Dincer; Rahighi, Javad; Winick, Herman

    2007-01-01

    SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) will be the Middle East's first international research center. It is a cooperative venture by the scientists and governments of the region with founding members Bahrain, Egypt, Israel, Jordan, Pakistan, Palestine Authority, and Turkey. Iran is in the process of finalizing its formal membership. Other countries (Cyprus, Morocco, and the United Arab Emirates) are also expected to join. The permanent Council of member states has full responsibility for the project. Members provide the annual operating budget. Observer countries are Germany, Greece, Italy, Kuwait, Portugal, Russian Federation, Sweden, the UK, and the US. SESAME is being developed under the umbrella of UNESCO. Jordan was selected as the building site. SESAME will offer excellent opportunities for training of Middle East scientists and attract those working abroad to consider returning. SESAME will be a 2.5GeV 3rd Generation light source (emittance 26nm-rad, circumference ∼133m), providing excellent performance for structural molecular biology, molecular environmental science, surface and interface science, microelectromechanical devices, x-ray imaging, archaeological microanalysis, and materials characterization. It will cover a broad spectral range from the infrared to hard x-rays and will have 12 straight sections for insertion devices (average length 2.75m). The injector will be the BESSY I 0.8 GeV booster synchrotron which has been given as a gift from Germany. Four committees advise the Council and assist in developing the technical design, beam lines, user community, and scientific Program. The SESAME building, now in construction with funds and a site provided by Jordan, is scheduled for completion in late 2006 after which the BESSY I injector will be installed. First stored beam in the new 2.5 GeV ring is planned for 2009 with six initial beamlines planned. Some beamlines will be built by member countries

  10. Building monument materials during the 3rd-4rd millennium (Portugal)

    Science.gov (United States)

    Moita, Patricia; Pedro, Jorge; Boaventura, Rui; Mataloto, Rui; Maximo, Jaime; Almeida, Luís; Nogueira, Pedro

    2014-05-01

    Dolmens are the most conspicuous remains of the populations of the 4th and first half of 3rd millennia BCE. These tombs are impressive not only for their monumentality, but also because of the socioeconomic investment they represent for those Neolithic communities, namely from the Central-South of Portugal, who built them. Although dolmens have been studied for their funerary content and typologies, an interdisciplinary approach toward the geological characterization and sourcing of stones used in these constructions has not received enough attention from researchers. With MEGAGEO project a multidisciplinary group of geologist and archaeologists intends to assess the relationship between the distribution of dolmens in Central-South Portugal, their source materials, and the geological landscape. GIS will map the information gathered and will be used to analyse these relationships. The selection of the areas, with distinctive geologies (limestone vs granite), will allow to verify if human patterns of behaviour regarding the selection of megaliths are similar or different regionally. Geologically the first target area (Freixo, Alentejo) is dominated by a small intrusion of gabbro mingled/mixed within a granodioritic intrusion both related with variscan orogeny. Granodiorite exhibit several enclaves of igneous and metamorphic nature attesting the interaction between both igneous rocks as well with enclosing gneisses. Despite Alentejo region have a reduced number of outcrops the granodiorite provides rounded to tabular metric blocks. The gabbro is very coarse grained, sometimes with a cumulate texture, and their fracturing and weathering provide very fresh tabular blocks. The five studied dolmens (Quinta do Freixo #1 to #5) are implanted in a large granodioritic intrusion, around the gabbroic rocks, within an area of approximately 9km2. The medium grained granodiorite is ubiquity in all the dolmens slabs and occasionally it can be observed features of mixing and

  11. Twenty years of operation of the Radioisotope Department of the 3rd Medical Clinic, Faculty of General Medicine, Charles University in Prague

    International Nuclear Information System (INIS)

    Kapitola, J.

    1983-01-01

    Twenty years ago a radioisotope department was established in the old building of the 3rd Medical Clinic in Prague 2. The department is suitably placed and meets present requirements. It was set up as part of the 3rd Medical Clinic and of the Laboratory for endocrinology and Metabolism which gave it its main orientation and scope. Its present scope is much broader. In the twenty years since it was established 115,800 examinations were carried out, some 40 examination methods were introduced, 103 publications published, members of the department were co-authors of another 113 publications, they completed 11 research projects. The production of the department represents a substantial part of laboratory material especially in the diagnosis of endocrinopathy and metabolic disorders at the Clinic and is a significant part of the material of a number of research projects. The department has significantly contributed to the development of nuclear medicine in the Czechoslovak Socialist Republic in thyroid diagnosis, by the first introduction of radioimmunoassay methods, by the introduction of certain other special examination and laboratory methods and is currently taking part in the fulfilment of tasks given by the zoning of nuclear medicine in health care in Czechoslovakia in general and in Prague in particular. (author)

  12. CELEBRATION OF DECEMBER 3RD, INTERNATIONAL DAY OF PERSONS WITH DISABILITIES

    Directory of Open Access Journals (Sweden)

    Maja FILIPOVSKA

    2017-03-01

    Full Text Available On December 2nd 2016 in the main amphitheater at the Faculty of Philosophy in Skopje, was held the celebration of December 3rd, the International Day of Persons with Disabilities, in organization of the Institute of Special Education and Rehabilitation. The official part of the program was started with a speech by Goran Ajdinski, PhD, the Dean of the Faculty of Philosophy in Skopje. The guests at the celebration were also greeted by the Rector of the University “Ss. Cyril and Methodius” – Skopje, Nikola Jankulovski, PhD and the Minister of Labor and Social Policy of Republic of Macedonia, Frosina Tashevska-Remenski, PhD. After the speeches, which highlighted the current efforts and future commitment to inclusion and accessibility of persons with disabilities, two awards were presented by the Humanitarian foundation “Prof. d-r Ljupco Ajdinski”. The first award was given to Simona Kostadinova as the student with achieved highest grade point average of 9.65 in the generation 2011/12 during the studies of Special education and rehabilitation. The second award was intended for the highest ranked student at the university admission in 2016/2017. This award belonged to Nadica Gjerasimova who had 97.70 points on the official rank list. Beside the awards, two acknowledgements for humanity were also given by the Foundation “Prof. d-r Ljupco Ajdinski”. For the longstanding human activity in preparation of special education and rehabilitation staff and education and rehabilitation of persons with disabilities, the first acknowledgement was given to the Institute of Special education and rehabilitation. The second acknowledgement was meant for Kiril Temkov, PhD, about his numerous initiated and organized human activities, especially for the published paper on the ethical dimensions of special education and rehabilitation and introduction of Ethics in the education system in Republic of Macedonia. The last part of the program was intended for

  13. PREFACE: 3rd International Workshop on Materials Analysis and Processing in Magnetic Fields (MAP3)

    Science.gov (United States)

    Sakka, Yoshio; Hirota, Noriyuki; Horii, Shigeru; Ando, Tsutomu

    2009-07-01

    The 3rd International Workshop on Materials Analysis and Processing in Materials Fields (MAP3) was held on 14-16 May 2008 at the University of Tokyo, Japan. The first was held in March 2004 at the National High Magnetic Field Laboratory in Tallahassee, USA. Two years later the second took place in Grenoble, France. MAP3 was held at The University of Tokyo International Symposium, and jointly with MANA Workshop on Materials Processing by External Stimulation, and JSPS CORE Program of Construction of the World Center on Electromagnetic Processing of Materials. At the end of MAP3 it was decided that the next MAP4 will be held in Atlanta, USA in 2010. Processing in magnetic fields is a rapidly expanding research area with a wide range of promising applications in materials science. MAP3 focused on the magnetic field interactions involved in the study and processing of materials in all disciplines ranging from physics to chemistry and biology: Magnetic field effects on chemical, physical, and biological phenomena Magnetic field effects on electrochemical phenomena Magnetic field effects on thermodynamic phenomena Magnetic field effects on hydrodynamic phenomena Magnetic field effects on crystal growth Magnetic processing of materials Diamagnetic levitation Magneto-Archimedes effect Spin chemistry Application of magnetic fields to analytical chemistry Magnetic orientation Control of structure by magnetic fields Magnetic separation and purification Magnetic field-induced phase transitions Materials properties in high magnetic fields Development of NMR and MRI Medical application of magnetic fields Novel magnetic phenomena Physical property measurement by Magnetic fields High magnetic field generation> MAP3 consisted of 84 presentations including 16 invited talks. This volume of Journal of Physics: Conference Series contains the proceeding of MAP3 with 34 papers that provide a scientific record of the topics covered by the conference with the special topics (13 papers) in

  14. Coronal MR imaging of the normal 3rd, 4th, and 5th lumbar and 1st sacral nerve roots

    International Nuclear Information System (INIS)

    Hald, J.K.; Nakstad, P.H.; Hauglum, B.E.

    1991-01-01

    Seven healthy volunteers underwent coronal MR imaging at 1.5 tesla of the normal 3rd, 4th, and 5th lumbar, and 1st sacral nerve roots. Coronal slices, 3-mm-thick with a 0.3-mm gap between the slices were obtained (TR/TE 600/22) through the lumbar spinal canal. All the nerve roots were visible on at least one image. One can routinely expect to demonstrate the 3rd, 4th, and 5th lumbar, and 1st sacral nerve roots on T1-weighted, 3-mm-thick coronal MR scans. We found no correlation between the degree of lumbar lordosis and the lengths of the visible nerve roots. Five patients with one of the following spinal problems: anomaly, tumor, disk herniation, and failed back surgery syndrome were examined according to our protocol. In all these cases coronal MR imaging gave the correct diagnosis. (orig.)

  15. Coronal MR imaging of the normal 3rd, 4th, and 5th lumbar and 1st sacral nerve roots

    Energy Technology Data Exchange (ETDEWEB)

    Hald, J K; Nakstad, P H; Hauglum, B E [National Hospital, Oslo (Norway). Dept. of Radiology

    1991-05-01

    Seven healthy volunteers underwent coronal MR imaging at 1.5 tesla of the normal 3rd, 4th, and 5th lumbar, and 1st sacral nerve roots. Coronal slices, 3-mm-thick with a 0.3-mm gap between the slices were obtained (TR/TE 600/22) through the lumbar spinal canal. All the nerve roots were visible on at least one image. One can routinely expect to demonstrate the 3rd, 4th, and 5th lumbar, and 1st sacral nerve roots on T1-weighted, 3-mm-thick coronal MR scans. We found no correlation between the degree of lumbar lordosis and the lengths of the visible nerve roots. Five patients with one of the following spinal problems: anomaly, tumor, disk herniation, and failed back surgery syndrome were examined according to our protocol. In all these cases coronal MR imaging gave the correct diagnosis. (orig.).

  16. Mechanical design and engineering of the 3.9 GHZ, 3rd harmonic SRF system at Fermilab

    International Nuclear Information System (INIS)

    Don Mitchell

    2004-01-01

    The mechanical development of the 3.9 GHz, 3rd Harmonic SRF System is summarized to include: the development of a full scale copper prototype cavity structure; the design of the niobium 3 cell and niobium 9 cell structures; the design of the helium vessel and cryostat; the HOM coupler design; and a preliminary look at the main coupler design. The manufacturing processes for forming, rolling, and e-beam welding the HOM coupler, cavity cells, and end tubes are also described. Due to the exotic materials and manufacturing processes used in this type of device, a cost estimate for the material and fabrication is provided. The 3rd harmonic design is organized via a web-based data management approach

  17. Mechanical design and engineering of the 3.9 GHZ, 3rd harmonic SRF system at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Don Mitchell et al.

    2004-08-05

    The mechanical development of the 3.9 GHz, 3rd Harmonic SRF System is summarized to include: the development of a full scale copper prototype cavity structure; the design of the niobium 3 cell and niobium 9 cell structures; the design of the helium vessel and cryostat; the HOM coupler design; and a preliminary look at the main coupler design. The manufacturing processes for forming, rolling, and e-beam welding the HOM coupler, cavity cells, and end tubes are also described. Due to the exotic materials and manufacturing processes used in this type of device, a cost estimate for the material and fabrication is provided. The 3rd harmonic design is organized via a web-based data management approach.

  18. Do 2nd and 3rd Grade Teachers' Linguistic Knowledge and Instructional Practices Predict Spelling Gains in Weaker Spellers?

    Science.gov (United States)

    Puliatte, Alison; Ehri, Linnea C.

    2018-01-01

    The relationship between 2nd and 3rd grade teachers' linguistic knowledge and spelling instructional practices and their students' spelling gains from fall to spring was examined. Second grade (N = 16) and 3rd grade (N = 16) teachers were administered an instructional practices survey and a linguistic knowledge test. Total scores on the two…

  19. 3rd International Conference on Stability and Handling of Liquid Fuels

    Science.gov (United States)

    1988-12-07

    potentiometric titration methods for the quantification of low levels of strong acids in gas oils are described, and results from a variety of straight-run...was homogenized and a Karl Fischer w..ater titration was performed. CONTAINING IWATEP, ’Enrecircrens w..i wh ater con tent cf greater than ’. were...storage facilities [491 M P Reynuurs, P Stegmann ........................... 137 Microbiological test methods for fuels in the laboratory and on site [5] E

  20. “Patenting Bioprinting Technologies in the US and Europe– The 5th element in the 3rd dimension"

    DEFF Research Database (Denmark)

    Minssen, Timo; Mimler, Marc

    2017-01-01

    of bioprinting- inventions are being patented or would be- protectable under European and US patent laws. Rather than focusing on the highly relevant questions that 3D printing poses for patent infringement doctrines and research exemptions , this paper concentrates on the question of patentable subject matter......, “Patenting Bioprinting Technologies in the US and Europe– The 5th element in the 3rd dimension", Working Paper, forthcoming in: RM Ballardini, M Norrgård & J Partanen (red), 3D printing, Intellectual Property and Innovation – Insights from Law and Technology. Wolters Klu. Available at https...

  1. Comparison of Assemblies of Four-Link Structural Groups of 3rd Class on the Transmission Angle

    Directory of Open Access Journals (Sweden)

    Matsyuk I.N.

    2016-05-01

    Full Text Available Comparison of various assemblies of four-link structural group of 3rd class with revolute joints on the transmission angle is performed. Equations of the trajectories of plug points of one of the groups of joint are obtained to determine transmission angles. Derived functions of these equations enable to determine the values of transmission angles for each assembly group. It is shown that only two assemblies of maximum possible assembling number of such group (six have practical value. The solution of this problem was performed with the help of Mathcad program.

  2. 3rd DAtF-seminar on the development of potential for young scientists and engineers in nuclear technology

    International Nuclear Information System (INIS)

    Gassner, H.

    2003-01-01

    The 3 rd seminar organized by the Deutsches Atomforum e.V. for young nuclear scientists and engineers seeking to realize their potential was about 'Communication - Key to Acceptance'. The topic was presented in contributions outlining the scientific viewpoint and in results of practical everyday experience. The young participants from all areas of the nuclear industry were sensitized to the problem areas under discussion, which were then debated in more detail. Reference was made to the importance of continuous communication with all participants. The seminar offered valuable suggestions for working with the media and the public, but also for handling information in one's daily work. (orig.)

  3. 3rd International Meeting for Researchers in Materials and Plasma Technology (IMRMPT) and 1st Symposium on Nanoscience and Nanotechnology

    International Nuclear Information System (INIS)

    2016-01-01

    These proceedings present the written contributions of the participants of the 3rd International Meeting for Researchers in Materials and Plasma Technology (3rd IMRMPT) and the 1st Symposium on Nanoscience and Nanotechnology which was held from 4 to May 9, 2015 at the Dann Carlton Hotel Bucaramanga, Colombia, organized by the faculty of science of the Universidad Industrial de Santander (UIS) and the basic science department of the Universidad Pontificia Bolivariana. This was the third version of biennial meetings that began in 2011. The five-day scientific program of the 3rd IMRMPT consisted of 24 Magisterial Conferences, 70 Oral Presentations, 185 Poster Presentations, 3 Courses and 1 Discussion Panel with the participation of undergraduate and graduate students, professors, researchers and entrepreneurs from Colombia, Russia, Germany, France, Spain, England, United States, Mexico, Argentina, Uruguay, Brazil, Venezuela, among others. Moreover, the objective of IMRMPT was to bring together national and international researchers in order to establish a network of scientific cooperation with a global impact in the area of the science and the technology of materials; to promote the exchange of creative ideas and the effective transfer of scientific knowledge, from fundamental research to innovation applied to industrial solutions and to advances in the development of new research allowing to increase the lifetime of the materials used in the industry by means of efficient transference of the knowledge between sectors academia and industry. The topics covered in the 3rd IMRMPT include New Materials, Surface Physics, Structural Integrity, Renewable Energy, Online Process Control, Non Destructive Evaluation, Characterization of Materials, Laser and Hybrid Processes, Thin Films and Nanomaterials, Surface Hardening Processes, Wear and Corrosion/Oxidation, Plasma Applications and Technologies, Modelling, Simulation and Diagnostics, Biomedical Coatings, Surface Treatments

  4. TUMULI, ROADS AND PLOTS. DECODING THE MONUMENTAL FUNERARY SPACE OF THE 4TH-3RD CENTURIES BC KALLATIS

    Directory of Open Access Journals (Sweden)

    Maria Magdalena Ștefan

    2017-03-01

    Full Text Available The study focusses on the monumental elements of the 4th-3rd centuries BC cemeteries of Kallatis: the use of large tumuli, the implementation of a systematized network of funerary plots, the extent of the burial grounds, the discovery of a series of built chamber tombs under tumuli with elements of decorated architecture, including mural paintings and exceptional presence of a statue topping a tumulus. The detection and morphological characterisation of archaeological features and the recovering of the funerary landscapes’ spatial layout were based on historiographic study, remote-sensing and geophysical investigations.

  5. Summary of the 3rd workshop on high power RF-systems for accelerators

    International Nuclear Information System (INIS)

    Sigg, P.K.

    2005-01-01

    The aim of this workshop was to bring together experts from the field of CW and high average power RF systems. The focus was on operational and reliability issues of high-power amplifiers using klystrons and tubes, large power supplies; as well as cavity design and low-level RF and feedback control systems. All these devices are used in synchrotron radiation facilities, high power linacs and collider rings, and cyclotrons. Furthermore, new technologies and their applications were introduced, amongst other: high power solid state amplifiers, IOT amplifiers, and high voltage power supplies employing solid state controllers/crowbars. Numerical methods for complete rf-field modeling of complex RF structures like cyclotrons were presented, as well as integrated RF-cavity designs (electro-magnetic fields and mechanical structure), using numerical methods. (author)

  6. 3rd International Conference on Micro and Nano Flows (MNF2011)

    CERN Document Server

    Koenig, Carola; Micro and Nano Flow Systems for Bioanalysis

    2013-01-01

    Micro and Nano Flow Systems for Bioanalysis addresses the latest developments in biomedical engineering at very small scales. It shows how organic systems require multi-scale understanding in the broadest sense whether the approach  is experimental or mathematical, and whether the physiological state is healthy or diseased. Micro-and nano-fluidics represent  key areas of translational research in which state-of-the-art engineering processes and devices are applied to bedside monitoring and treatment. By applying conventional micro- and nano-engineering to complex organic solids, fluids, and their interactions, leading researchers from throughout the world describe methods and techniques with great potential for use in medicine and clinical practice. Coverage includes the seeming plethora of new, fine-scale optical methods for measuring blood flow as well as endothelial activation and interaction with tissue. Generic areas of modeling and bioelectronics are also considered. In keeping with the recurring them...

  7. 3rd International conference on nuclei far from stability, Cargese, Corsica, 19-26 May 1976

    International Nuclear Information System (INIS)

    1976-01-01

    These conference proceedings contain 103 contributions which are grouped under the following headings: Experimental methods and techniques; Perspectives in research on exotic nuclei; Nuclear masses - experiment and theory; Nuclear spins, moments, and radii; Light nuclei; Delayed particle emission and statistical aspects; Excited states of neutron-deficient nuclei; Excited states of fission products and other neutron-rich isotopes; Heavy elements and astrophysical aspects. Also included are the Scientific programme and a List of participants. (AJ)

  8. Knowledge and institutional requirements to promote land degradation neutrality in drylands - An analysis of the outcomes of the 3rd UNCCD scientific conference

    Science.gov (United States)

    Akhtar-Schuster, Mariam; Safriel, Uriel; Abraham, Elena; de Vente, Joris; Essahli, Wafa; Escadafal, Richard; Stringer, Lindsay

    2015-04-01

    Achieving land degradation neutrality (LDN) through sustainable land management (SLM) targets the maintenance or restoration of the productivity of land, and therefore has to include decision-makers, knowledge generators and knowledge holders at the different relevant geographic scales. In order to enhance the implementation of the Convention, the Conference of the Parties (COP) of the United Nations Convention to Combat Desertification therefore decided that each future session of its Committee on Science and Technology (CST) would be organized in a predominantly scientific and technical conference-style format. This contribution will outline the major outcomes of UNCCD's 3rd scientific conference that will be held in Cancún, Mexico, from 9 to 12 March 2015, on addressing desertification, land degradation and drought issues (DLDD) for poverty reduction and sustainable development. The conference follows an exceptional new round table conference format that will allow the various stakeholders to discuss scientific as well as the contribution of traditional knowledge and practices in combating land degradation. This format should provide two-way communication and enable deeper insight into the availability and contribution of all forms of knowledge for achieving LDN through the assessment of: • the vulnerability of lands to DLDD and climate change and the adaptive capacities of socio-ecosystems; • best examples of adapted, knowledge-based practices and technologies; • monitoring and assessment methods to evaluate the effectiveness of adaptation practices and technologies. The outcomes of UNCCD's 3rd scientific conference will serve as a basis for discussing: • contributions of science to diagnose the status of land; • research gaps that need to be addressed to achieve LDN for poverty reduction; • additional institutional requirements to optimally bridge knowledge generation, knowledge maintenance and knowledge implementation at the science

  9. [Rapid karyotyping in the 2nd and 3rd trimester: results and experiences].

    Science.gov (United States)

    Claussen, U; Voigt, H J; Ulmer, R; Beinder, E

    1995-01-01

    Rapid karyotyping in the second and third trimester is an increasing field of collaboration between women's hospitals and human genetics. Techniques available for rapid karyotyping are: 1. Amniocentesis; to obtain amniotic fluid cells for culturing and subsequent chromosome harvesting using the pipette method or the "in situ" technique. The average time between preparation of the amniotic fluid and the verbal notification of the analysed karyotype is 4.65 days for the pipette method and 5.97 days for the "in situ" technique. The major advantages are that amniocentesis can be handled safely by many gynaecologist, and the amniotic fluid samples can be posted easily to cytogenetic units familiar with rapid karyotyping. The main disadvantage is that currently only a few laboratories are able to handle the pipette method or the "in situ" technique for rapid karyotyping. 2. Fetal blood sampling (cordocentesis); and subsequent chromosome analysis on cultivated fetal lymphocytes leading to results within 2 to 4 days. The main advantage of this procedure is the reliability of the results obtained. Fetal blood sampling, however, is restricted to specialists; this may involve scheduling delays. 3. Placental biopsy; with subsequent direct preparation and long term culturing. In comparison to both other techniques this procedure is faster if direct preparation is used. Results can be obtained even on the same day. The main disadvantage, however, is the problem with the reliability of the direct preparation results. They must be confirmed by time-consuming long-term culturing. Data are presented on the likelihood of abnormal ultrasound findings being caused by chromosomal aberrations.(ABSTRACT TRUNCATED AT 250 WORDS)

  10. A procedure for safety assessment of components with cracks - Handbook. 3rd revised edition

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, P.; Bergman, M.; Brickstad, B.; Dahlberg, L.; Nilsson, F.; Sattari-Far, I. [SAQ Kontroll AB, Stockholm (Sweden)

    1999-12-01

    In this handbook a procedure is described which can be used both for assessment of detected cracks or crack-like defects and for defect tolerance analysis. The procedure can be used to calculate possible crack growth due to fatigue or stress corrosion and to calculate the reserve margin for failure due to fracture and plastic collapse. For ductile materials, the procedure gives the reserve margin for initiation of stable crack growth. Thus, an extra reserve margin, unknown to size, exists for failure in components made of ductile materials. The procedure was developed for operative use with the following objectives in mind: a) The procedure should be able to handle both linear and non-linear problems without any a priori division. b) The procedure shall ensure uniqueness of the safety assessment. c) The procedure should be well defined and easy to use. d) The conservatism of the procedure should be well validated. e) The handbook, that documents the procedure, should be so complete that for most assessments, access to any other fracture mechanics literature should not be necessary. The method utilized in the procedure is based on the R6-method developed at Nuclear Electric plc. The basic assumption is that fracture initiated by a crack can be described by the variables K{sub r} and L{sub r}. K{sub r} is the ratio between the stress intensity factor and the fracture toughness of the material. L{sub r} is the ratio between applied load and the plastic limit load of the structure. The pair of calculated values of these variables is plotted in a diagram. If the point is situated within the noncritical region, fracture is assumed not to occur. If the point is situated outside the region, crack growth and fracture may occur. The method can in principal be used for all metallic materials. It is, however, more extensively verified for steel alloys only. The method is not intended for use in temperature regions where creep deformation is of importance. To fulfil the above

  11. A procedure for safety assessment of components with cracks - Handbook. 3rd revised edition

    International Nuclear Information System (INIS)

    Andersson, P.; Bergman, M.; Brickstad, B.; Dahlberg, L.; Nilsson, F.; Sattari-Far, I.

    1999-12-01

    In this handbook a procedure is described which can be used both for assessment of detected cracks or crack-like defects and for defect tolerance analysis. The procedure can be used to calculate possible crack growth due to fatigue or stress corrosion and to calculate the reserve margin for failure due to fracture and plastic collapse. For ductile materials, the procedure gives the reserve margin for initiation of stable crack growth. Thus, an extra reserve margin, unknown to size, exists for failure in components made of ductile materials. The procedure was developed for operative use with the following objectives in mind: a) The procedure should be able to handle both linear and non-linear problems without any a priori division. b) The procedure shall ensure uniqueness of the safety assessment. c) The procedure should be well defined and easy to use. d) The conservatism of the procedure should be well validated. e) The handbook, that documents the procedure, should be so complete that for most assessments, access to any other fracture mechanics literature should not be necessary. The method utilized in the procedure is based on the R6-method developed at Nuclear Electric plc. The basic assumption is that fracture initiated by a crack can be described by the variables K r and L r . K r is the ratio between the stress intensity factor and the fracture toughness of the material. L r is the ratio between applied load and the plastic limit load of the structure. The pair of calculated values of these variables is plotted in a diagram. If the point is situated within the noncritical region, fracture is assumed not to occur. If the point is situated outside the region, crack growth and fracture may occur. The method can in principal be used for all metallic materials. It is, however, more extensively verified for steel alloys only. The method is not intended for use in temperature regions where creep deformation is of importance. To fulfil the above given objectives

  12. Investigating Portfolio Assessment with Learners of the 3rd Grade in a Greek State Primary School

    Directory of Open Access Journals (Sweden)

    Sophia Kouzouli

    2012-02-01

    Full Text Available Assessment is a field increasingly explored in relation to the parameters it involves. The special characteristics of the learners and the interactive relationship between instruction and assessment lead to the use not only of traditional assessment techniques but also of alternative methods such as the portfolio. This study intends to investigate the implementation of a process portfolio in a Greek state primary school with a class of third graders aged between 8-9, concentrating on integration of skills. The findings show that this technique is appropriate for young learners and that it meets specific pedagogical and assessment criteria. It also exerts positive impact on metacognitive awareness, learner autonomy and positive attitude towards learning. Finally, the findings give insight to emerging problems and issues requiring further research.

  13. 3rd International Conference on Advanced Engineering : Theory and Applications 2016

    CERN Document Server

    Dao, Tran; Kim, Sang; Tien, Nguyen; Zelinka, Ivan

    2017-01-01

    These lecture notes present selected topics concerning a wide range of electrical and electronics applications, highlighting innovative approaches and offering state-of-the-art overviews. The book is divided into 14 topical areas, including e.g. telecommunication, power systems, robotics, control systems, renewable energy, mechanical engineering, computer science and more. Readers will find revealing papers on the design and implementation of control algorithms for automobiles and electrohydraulic systems, efficient protocols for vehicular ad hoc networks and motor control, and energy-saving methods that can be applied in various fields of electrical engineering. The book offers a valuable resource for all practitioners who want to apply the topics discussed to solve real-world problems in their challenging applications. Offering insights into common and related subjects in the research fields of modern electrical, electronic and related technologies, it will also benefit all scientists and engineers working ...

  14. Currant imaging of the 3rd, 4th and 6th cranial nerves

    International Nuclear Information System (INIS)

    Kerty, Emilia; Bakke, Soeren Jacob

    2001-01-01

    The ocular motor cranial nerves (III, IV, VI) control the eye movements in a near association with the higher cortical areas. Clinically, the most common presentation of abnormal ocular motility is double vision. Identifying the cause of ocular nerve pulsy can be difficult and a large percentage of such cases still remains undiagnosed, even in a new era of neuroradiological techniques. Close co-operation between the clinician and the radiologist is necessary for the selection of the best imaging methods for the specific clinical problem, in order to see the aetiological and topological diagnosis. The article provides a practical review of advances in neuroimaging of the ocular motor nerves. 4 figs., 2 tabs., 15 refs

  15. The relationship between component skills, reading experience, and reading comprehension in Danish 3rd graders

    DEFF Research Database (Denmark)

    Rønberg, Louise Flensted-Jensen; Petersen, Dorthe Klint

    data sets were obtained from 179 Danish Grade 3 pupils. Participants were given a standard reading comprehension test requiring multiple-choice answers to six different texts of various length and type. Orthographic and phonological coding, as well as non-verbal problem solving were assessed by means......Purpose The main aim of this study was to investigate the contribution of aspects of vocabulary, word reading abilities, and reading experience to reading comprehension, and to analyse sub-samples of students with comprehension difficulties. Method The study employed a cross-sectional design. Full......: path, street, road, river). Results Data analyses showed that in the entire sample, skills of semantic lexical structuring and reading experience made strong contributions to reading comprehension. Analyses of the pupils below the 25%-percentile in reading comprehension revealed that for the vast...

  16. 3rd congress on applied synthetic biology in Europe (Costa da Caparica, Portugal, February 2016).

    Science.gov (United States)

    Cueva, Miguel

    2017-03-25

    The third meeting organised by the European Federation of Biotechnology (EFB) on advances in Applied Synthetic Biotechnology in Europe (ASBE) was held in Costa da Caparica, Portugal, in February 2016. Abundant novel applications in synthetic biology were described in the six sessions of the meeting, which was divided into technology and tools for synthetic biology (I, II and III), bionanoscience, biosynthetic pathways and enzyme synthetic biology, and metabolic engineering and chemical manufacturing. The meeting presented numerous methods for the development of novel synthetic strains, synthetic biological tools and synthetic biology applications. With the aid of synthetic biology, production costs of chemicals, metabolites and food products are expected to decrease, by generating sustainable biochemical production of such resources. Also, such synthetic biological advances could be applied for medical purposes, as in pharmaceuticals and for biosensors. Recurrent, linked themes throughout the meeting were the shortage of resources, the world's transition into a bioeconomy, and how synthetic biology is helping tackle these issues through cutting-edge technologies. While there are still limitations in synthetic biology research, innovation is propelling the development of technology, the standardisation of synthetic biological tools and the use of suitable host organisms. These developments are laying a foundation to providing a future where cutting-edge research could generate potential solutions to society's pressing issues, thus incentivising a transition into a bioeconomy. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. 3rd International Conference on Dynamics, Games and Science & 7th Berkeley Bioeconomy Conference

    CERN Document Server

    Zilberman, David

    2017-01-01

    The concepts and techniques presented in this volume originated from the fields of dynamics, statistics, control theory, computer science and informatics, and are applied to novel and innovative real-world applications. Over the past few decades, the use of dynamic systems, control theory, computing, data mining, machine learning and simulation has gained the attention of numerous researchers from all over the world. Admirable scientific projects using both model-free and model-based methods coevolved at today’s research centers and are introduced in conferences around the world, yielding new scientific advances and helping to solve important real-world problems. One important area of progress is the bioeconomy, where advances in the life sciences are used to produce new products in a sustainable and clean manner. In this book, scientists from all over the world share their latest insights and important findings in the field.  The majority of the contributed papers for this volume were written by particip...

  18. Gene-based technologies for livestock industries in the 3rd millennium

    International Nuclear Information System (INIS)

    Cunningham, E.P.

    2005-01-01

    The first complete genome sequence of an organism was for yeast, in 1996. Since then, the much larger task of doing a complete human sequence has been completed. Those of major domestic animals are following rapidly. It will always be impossible to foresee the full potential of such an explosion in knowledge, but aspects of gene-based technologies are already beginning to have an impact in the livestock sector. The first and most obvious area of impact concerns feed supply, which constitutes 50-75 percent of total costs in many livestock systems. Production costs for maize and soybean are being reduced by genetic modification of the crop for herbicide and insect resistance. Maize has been modified to reduce phosphorous and nitrogen excretion in swine and poultry, and also to provide a more valuable amino acid balance. Genetic modification of the animal is also possible. Most dramatically, the insertion of a growth hormone in the DNA of fish accelerates growth. However, in this and all other cases, the genetic modification (GM) of animals has produced profound physiological disturbances. At the same time, the administration of GM-produced growth hormone to dairy cows is now routine in the United States of America and several other countries. This is not permitted in Europe, where the attitude to all GM technologies has been much more cautious. Conventional selection programmes continue to deliver steady genetic improvement in all animal populations. New molecular methods offer the prospect of enhancing genetic gains, particularly for traits that are difficult or expensive to measure, or which have low heritability. Gene technologies have much to contribute to the control of disease in animals. As pressure to reduce antibiotic and drug use increases, genetically modified vaccines with proven specificity and distinguishable from natural infections are already in use. DNA typing is helping with rapid and precise diagnosis. In addition, the interaction of some pathogens

  19. Linac-augmented light sources : an incremental concept for enhancing the capabilities of existing 3rd-generation storage rings

    International Nuclear Information System (INIS)

    Lewellen, J. W.

    2003-01-01

    Planned and proposed 4th-generation x-ray sources, such as energy-recovery linacs (ERLs) and single-pass x-ray free-electron lasers (X-FELs) offer a number of potential advantages, including small source size, higher peak brightness, ultrashort pulses, and potentially temporally and transversely coherent pulses. While offering unique capabilities, such facilities will also offer several important limitations, including limited numbers of user beamlines (for FELs) and a pulse-repetition rate that may be too high for many dynamics experiments (ERLs). In addition, there are many technical challenges associated with both types of facilities. A third type of facility, exemplified by the Short Pulse Photon Source (SPPS) at SLAC [1], would support neither a large number of users simultaneously nor generate coherent pulses, but would generate very intense, short x-ray pulses. Such a facility could serve as the starting point for either an ERL or an X-FEL, or a combined, hybrid machine. For the foreseeable future, however, existing 3rd-generation light source storage rings, such as the Advanced Photon Source, will continue to play important roles in supporting scientific research utilizing high-brightness x-rays. Existing facilities offer the powerful combination of a large number of user beamlines, efficient use of electron beam energy, and established user communities, and a program of incremental investment in, and improvements to, these facilities should continue to pay dividends into the future. This document discusses potential upgrade paths based on the Advanced Photon Source (APS) as a model 3rd-generation facility. If existing 3rd-generation facilities are to remain centers of excellence for light source-based research into the future, they must not only maintain and enhance their support of their existing user base, but also seek to expand their capabilities to support additional classes of users. There are several paths available toward this goal. The APS is

  20. 3rd International Conference on Life Cycle Management. From analysis to implementation

    International Nuclear Information System (INIS)

    Hellweg, S.; Rebitzer, G.

    2007-01-01

    created if the specific implementation of life cycle management approaches does not only address environmental issues, but embraces social and economic aspects from the viewpoint of all relevant stakeholders. This focus on opportunities and value creation opens up new frontiers, where sustainability is the basis also for the long term sustainability of the firm, ensuring stability and economic growth. The real challenge is the operational implementation of life cycle management in strategic management, product and process planning, as well as in day-to-day decision-making in research and development, manufacturing, sales and marketing, communication, etc. This challenge can only be met if life cycle approaches can be easily applied, and social and economic aspects all along the life cycle can be addressed also by acknowledged methods. Concepts and tools are presented that are used for the implementation of life cycle management in the business processes, focusing not only on methodological, but also on management process development issues. Starting from a vision of long term sustainability both for the company and the relevant stakeholders, possible solutions and hands-on experiences are discussed. The Resource Strategy of the European Commission aims at reducing environmental impacts associated with resource use. The impacts of unsustainable resource use include, e.g., climate change due to fossil fuel use, land use and environmental degradation due to mineral extraction and processing, or overexploitation of soil and fish stocks. To decouple environmental impacts from economic growth, a life-cycle approach is adopted. The environmental impacts are considered at each stage of the life cycle of a resource, avoiding that negative impacts are shifted to other environmental media, to other stages of the life cycle, or to other countries. Key to achieving decoupling are three factors: Creating more value while using fewer resources ('resource productivity'); Less impact

  1. Main results on pilot operation during 5 years of the 3rd generation fuel in VVER-440 reactors of Kola NPP

    International Nuclear Information System (INIS)

    Saprykin, V.; Sumarokov, M.; Gagarinskiy, A.; Sumarokova, A.; Adeev, V.

    2015-01-01

    In the report the results of comparison of main neutron-physical data of exploitation of nuclear fuel are presented for the average enrichment (on U - 235) of 4.87 for the 2nd and 3rd (12 piece) generations with the results of calculations by the complex of the programs KASKAD for 5 fuel loadings of Kola NPP Unit 4 with the reactor VVER- 440. The basic feature of fuel of the 3rd generation as compared with the 2nd is a presence of ribs of inflexibility at corners instead of cover of the fuel assembly and also the increased amount of uranium. The arrangement of fuel rods with different enrichment in fuel assemblies of the 2nd and 3rd generations is chosen identical for the convenient comparison of neutronic and thermohydraulic characteristics of the fuel of different generations. The fuel of 3rd generation was situated in the core symmetrically to the fuel of 2nd one

  2. Results of the independent verification of radiological remedial action at 280 South 3rd East Street, Monticello, Utah (MS00099)

    International Nuclear Information System (INIS)

    Crutcher, J.W.; Wilson, M.J.

    1990-02-01

    In 1980 the site of a vanadium and uranium mill at Monticello, Utah, was accepted into the US Department of Energy's (DOE's) Surplus Facilities Management Program, with the objectives of restoring the government-owned mill site to safe levels of radioactivity, disposing of or containing the tailings in an environmentally safe manner, and performing remedial actions on off-site (vicinity) properties that had been contaminated by radioactive material resulting from mill operations. During 1985 and 1986, UNC Geotech, the remedial action contractor designated by DOE, performed remedial action on the vicinity property at 280 South 3rd East Street, Monticello, Utah. The Pollutant Assessments Group (PAG) of Oak Ridge National Laboratory was assigned the responsibility of verifying the data supporting the adequacy of remedial action and confirming the site's compliance with DOE guidelines. The PAG found that the site successfully meets the DOE remedial action objectives. Procedures used by PAG are described. 3 refs., 2 tabs

  3. Results of the independent verification of radiological remedial action at 397 East 3rd South Street, Monticello, Utah (MS00168)

    International Nuclear Information System (INIS)

    Wilson, M.J.; Crutcher, J.W.

    1991-07-01

    In 1980 the site of a vanadium and uranium mill at Monticello, Utah, was accepted into the US Department of Energy's (DOE's) Surplus Facilities Management Program, with the objectives of restoring the government-owned mill site to safe levels of radioactivity, disposing of or containing the tailings in an environmentally safe manner, and performing remedial actions on off-site (vicinity) properties that had been contaminated by radioactive material resulting from mill operations. During 1987 and 1988, UNC Geotech, the remedial action contractor designated by DOE, performed remedial action on the vicinity property at 397 East 3rd South Street, Monticello, Utah. The Pollutant Assessments Group (PAG) of Oak Ridge National Laboratory was assigned the responsibility of verifying the data supporting the adequacy of remedial action and confirming the site's compliance with DOE guidelines. The PAG found that the site successfully meets the DOE remedial action objectives. Procedures used by PAG are described. 3 refs., 2 tabs

  4. THE 3rd SCHIZOPHRENIA INTERNATIONAL RESEARCH SOCIETY CONFERENCE, 14-18 APRIL 2012, FLORENCE, ITALY: SUMMARIES OF ORAL SESSIONS

    Science.gov (United States)

    Abbs, Brandon; Achalia, Rashmin M; Adelufosi, Adegoke O; Aktener, Ahmet Yiğit; Beveridge, Natalie J; Bhakta, Savita G; Blackman, Rachael K; Bora, Emre; Byun, MS; Cabanis, Maurice; Carrion, Ricardo; Castellani, Christina A; Chow, Tze Jen; Dmitrzak-Weglarz, M; Gayer-Anderson, Charlotte; Gomes, Felipe V; Haut, Kristen; Hori, Hiroaki; Kantrowitz, Joshua T; Kishimoto, Taishiro; Lee, Frankie HF; Lin, Ashleigh; Palaniyappan, Lena; Quan, Meina; Rubio, Maria D; Ruiz de Azúa, Sonia; Sahoo, Saddichha; Strauss, Gregory P; Szczepankiewicz, Aleksandra; Thompson, Andrew D; Trotta, Antonella; Tully, Laura M; Uchida, Hiroyuki; Velthorst, Eva; Young, Jared W; O’Shea, Anne; DeLisi, Lynn E.

    2013-01-01

    The 3rd Schizophrenia International Research Society Conference was held in Florence, Italy, April 14-18, 2012.and this year had as its emphasis, “The Globalization of Research”. Student travel awardees served as rapporteurs for each oral session and focused their summaries on the most significant findings that emerged and the discussions that followed. The following report is a composite of these summaries. We hope that it will provide an overview for those who were present, but could not participate in all sessions, and those who did not have the opportunity to attend, but who would be interested in an update on current investigations ongoing in the field of schizophrenia research. PMID:22910407

  5. Quantification of bone mineral density at 3rd lumbar vertebra by dual photon absorptiometry in healthy subjects

    International Nuclear Information System (INIS)

    Fukunaga, Masao; Otsuka, Nobuaki; Ono, Shimato

    1987-01-01

    Bone mineral density (BMD), by dual photon absorptiometry (DPA), at the 3rd lumbar vertebra (L 3 ) was measured in healthy subjects (37 males and 49 females). BMD values on 1 slice of vertebral body (L 3 ), employed as a routine, showed good correlation to the mean BMD values, calculated from multiple slices of whole L 3 . BMD values, by DPA, at L 3 were better correlation to concentrations of bone mineral equivalent material, by quantitative computed tomography, at the trabecular bone of L 3 than to BMD values, by single photon absorptiometry, at distal radius (predominantly cortical bone). Furthermore, by this DPA technique, bone diminution at L 3 with aging was shown in both sexes. These data suggest that measurements of BMD by DPA is greatly useful for evaluating the spinal bone mineral content. (author)

  6. 3rd Singularity Theory Meeting of Northeast region & the Brazil-Mexico 2nd Meeting on Singularities

    CERN Document Server

    Neto, Aurélio; Mond, David; Saia, Marcelo; Snoussi, Jawad; BMMS 2/NBMS 3; ENSINO; Singularities and foliations geometry, topology and applications

    2018-01-01

    This proceedings book brings selected works from two conferences, the 2nd Brazil-Mexico Meeting on Singularity and the 3rd Northeastern Brazilian Meeting on Singularities, that were hold in Salvador, in July 2015. All contributions were carefully peer-reviewed and revised, and cover topics like Equisingularity, Topology and Geometry of Singularities, Topological Classification of Singularities of Mappings, and more. They were written by mathematicians from several countries, including Brazil, Spain, Mexico, Japan and the USA, on relevant topics on Theory of Singularity, such as studies on deformations, Milnor fibration, foliations, Catastrophe theory, and myriad applications. Open problems are also introduced, making this volume a must-read both for graduate students and active researchers in this field.

  7. Results of the independent verification of radiological remedial action at 381 East 3rd South Street, Monticello, Utah (MS00140)

    International Nuclear Information System (INIS)

    Crutcher, J.W.; Smuin, M.W.

    1989-10-01

    In 1980 the site of a vanadium and uranium mill at Monticello, Utah, was accepted into the US Department of Energy (DOE's) Surplus Facilities Management Program, with the objectives of restoring the government-owned mill site to safe levels of radioactivity, disposing of or containing the tailings in an environmentally safe manner, and performing remedial actions on off-site (vicinity) properties that had been contaminated by radioactive material resulting from mill operations. During 1986, UNC Geotech, the remedial action contractor designated by DOE, performed remedial action on the vicinity at 381 East 3rd South Street, Monticello, Utah. The Pollutant Assessments group (PAG) of Oak Ridge National Laboratory was assigned the responsibility of verifying the data supporting the adequacy of remedial action and confirming the site's compliance with DOE guidelines. The PAG found that the site successfully meets the DOE remedial action objectives. Procedures used by PAG are described. 3 refs., 2 tabs

  8. Results of the independent verification of radiological remedial action at 281 East 3rd South Street, Monticello, Utah (MS00138)

    International Nuclear Information System (INIS)

    Crutcher, J.W.; Wilson, M.J.

    1990-02-01

    In 1980 the site of a vanadium and uranium mill at Monticello, Utah, was accepted into the US Department of Energy's (DOE's) Surplus Facilities Management Program, with the objectives of restoring the government-owned mill site to safe levels of radioactivity, disposing of or containing the tailings in an environmentally safe manner, and performing remedial actions on off-site (vicinity) properties that had been contaminated by radioactive material resulting from mill operations. During 1985, UNC Geotech, the remedial action contractor designated by DOE, performed remedial action on the vicinity property at 281 East 3rd South Street, Monticello, Utah. The Pollutant Assessments Group (PAG) of Oak Ridge National Laboratory was assigned the responsibility of verifying the data supporting the adequacy of remedial action and confirming the site's compliance with DOE guidelines. The PAG found that the site successfully meets the DOE remedial action objectives. Procedures used by PAG are described. 3 refs., 2 tabs

  9. Results of the independent verification of radiological remedial action at 196 East 3rd South Street, Monticello, Utah (MS00083)

    International Nuclear Information System (INIS)

    Crutcher, J.W.; Smuin, M.W.

    1989-10-01

    In 1980 the site of a vanadium and uranium mill at Monticello, Utah, was accepted into the US Department of Energy's (DOE) Surplus Facilities Management program with the objectives of restoring the government-owned mill site to safe levels of radioactivity, disposing of or containing the tailings in an environmentally safe manner, and performing remedial actions on off-site (vicinity) properties that had been contaminated by radioactive material resulting from mill operations. During 1984 and 1985, UNC Geotech, the remedial action contractor designated by DOE, performed remedial action on the vicinity property at 196 East 3rd South Street, Monticello, Utah. The Pollutant Assessments Group (PAG) of Oak Ridge National Laboratory was assigned the responsibility of verifying the data supporting the adequacy of remedial action and confirming the site's compliance with DOE guidelines. The PAG found that the site successfully meets the DOE remedial action objectives. Procedures used by PAG are described. 3 refs., 2 tabs

  10. 3rd SAGA Workshop

    CERN Document Server

    Conti, Giuseppe

    2014-01-01

    Mathematical algorithms are a fundamental component of Computer Aided Design and Manufacturing (CAD/CAM) systems. This book provides a bridge between algebraic geometry and geometric modelling algorithms, formulated within a computer science framework. Apart from the algebraic geometry topics covered, the entire book is based on the unifying concept of using algebraic techniques – properly specialized to solve geometric problems – to seriously improve accuracy, robustness and efficiency of CAD-systems. It provides new approaches as well as industrial applications to deform surfaces when animating virtual characters, to automatically compare images of handwritten signatures, and to improve control of NC machines. This book further introduces a noteworthy representation based on 2D contours, which is essential to model the metal sheet in industrial processes. It additionally reviews applications of numerical algebraic geometry to differential equations systems with multiple solutions and bifurcations. Futur...

  11. 3rd IDPASC School

    CERN Document Server

    Lectures on particle physics, astrophysics and cosmology

    2015-01-01

    This volume gathers the content of the courses held at the Third IDPASC School, which took place in San Martiño Pinario, Hospederia and Seminario Maior, in the city of Santiago de Compostela, Galiza, Spain, from January 21st to February 2nd, 2013. This school is the annual joint program of the International Doctorate Network in Particle Physics, Astrophysics, and Cosmology (IDPASC).   The purpose of the school series is to present doctoral students from different universities and laboratories in Europe and beyond with a broad range of the latest results and current state of the art in the fields of Particle Physics, Astrophysics, and Cosmology, and to further introduce them to both the questions now posed by the potentials of physics and to challenges connected with current and future experiments – in particular, with the newly available energy ranges.   Following these guidelines, the content of this third edition of the IDPASC School was jointly planned by the Academic Council and by the network’s In...

  12. 3rd Dynamics Days

    CERN Document Server

    Clerc, Marcel

    2016-01-01

    This book presents recent advances, new ideas and novel techniques related to the field of nonlinear dynamics, including localized pattern formation, self-organization and chaos. Various natural systems ranging from nonlinear optics to mechanics, fluids and magnetic are considered. The aim of this book is to gather specialists from these various fields of research to promote cross-fertilization and transfer of knowledge between these active research areas. In particular, nonlinear optics and laser physics constitute an important part in this issue due to the potential applications for all-optical control of light, optical storage, and information processing. Other possible applications include the generation of ultra-short pulses using all-fiber cavities.

  13. DETECTION OF PROTOZOAN PARASITES IN SOURCE AND FINISHED WATER - 3RD EDITION ASM'S METHODS IN ENVIRONMENTAL MICROBIOLOGY

    Science.gov (United States)

    Protozoans are eukaryotic organisms which can live either a free-living or parasitic existence. Some free-living forms, under the right conditions, can become opportunistic parasites. Enteric pathogenic protozoans, like Giardia and Cryptosporidium, which are now known to be tra...

  14. A Kinesthetic Learning Approach to Earth Science for 3rd and 4th Grade Students on the Pajarito Plateau, Los Alamos, NM

    Science.gov (United States)

    Wershow, H. N.; Green, M.; Stocker, A.; Staires, D.

    2010-12-01

    Current efforts towards Earth Science literacy in New Mexico are guided by the New Mexico Science Benchmarks [1]. We are geoscience professionals in Los Alamos, NM who believe there is an important role for non-traditional educators utilizing innovative teaching methods. We propose to further Earth Science literacy for local 3rd and 4th grade students using a kinesthetic learning approach, with the goal of fostering an interactive relationship between the students and their geologic environment. We will be working in partnership with the Pajarito Environmental Education Center (PEEC), which teaches the natural heritage of the Pajarito Plateau to 3rd and 4th grade students from the surrounding area, as well as the Family YMCA’s Adventure Programs Director. The Pajarito Plateau provides a remarkable geologic classroom because minimal structural features complicate the stratigraphy and dramatic volcanic and erosional processes are plainly on display and easily accessible. Our methodology consists of two approaches. First, we will build an interpretive display of the local geology at PEEC that will highlight prominent rock formations and geologic processes seen on a daily basis. It will include a simplified stratigraphic section with field specimens and a map linked to each specimen’s location to encourage further exploration. Second, we will develop and implement a kinesthetic curriculum for an exploratory field class. Active engagement with geologic phenomena will take place in many forms, such as a scavenger hunt for precipitated crystals in the vesicles of basalt flows and a search for progressively smaller rhyodacite clasts scattered along an actively eroding canyon. We believe students will be more receptive to origin explanations when they possess a piece of the story. Students will be provided with field books to make drawings of geologic features. This will encourage independent assessment of phenomena and introduce the skill of scientific observation. We

  15. ECH power deposition at 3rd harmonic in high elongation TCV discharges sustained by 2nd harmonic current profile broadening

    International Nuclear Information System (INIS)

    Pochelon, A. . E-mail : Antoine.Pochelon@epfl.ch; Arnoux, G.; Camenen, Y.

    2003-01-01

    This paper summarises the present effort aimed at developing high elongation heated discharges and testing their confinement properties at normalised currents for which the highest ideal MHD β-limits are predicted. 2nd harmonic (X2) far off-axis ECH/CD is used to stabilise the plasma vertically at high elongation by broadening the current profile in stationary conditions (during the current flat top and over several current diffusion times). Current broadening is maximal for a power deposition in a narrow region (∼a/5), for a finite toroidal injection angle and for high plasma density using upper lateral launchers to minimise refraction. In these discharges which are twice X2 overdense in the centre, 3rd harmonic (X3) is injected from a top launcher to deposit power in the centre and increase the central pressure, simultaneously with far off-axis X2. Using modulated X3, full absorption is measured by the diamagnetic probe. Absorption higher than calculated by thermal ray tracing is occasionally found, indicating absorption on the electron bulk as well as in the suprathermal electron population sometimes with a hollow deposition profile. The high sensitivity of the power coupling to the beam angle stresses the need for developing a mirror feedback scheme to increase the coupling efficiency in transient heating scenarios. (author)

  16. 3rd Quarter Transportation Report FY 2014: Radioactive Waste Shipments to and from the Nevada National Security Site (NNSS)

    International Nuclear Information System (INIS)

    Gregory, Louis

    2014-01-01

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the 3rd quarter of Fiscal Year (FY) 2014 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. This report also includes annual summaries for FY 2014 in Tables 4 and 5. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report do not include minor volumes of non-radioactive materials that were approved for disposal. Volume reports showing cubic feet generated using the Low-Level Waste Information System may vary slightly due to differing rounding conventions.

  17. Psychometric properties and validation of Portuguese version of Ages & Stages Questionnaires (3rd edition): 9, 18 and 30 Questionnaires.

    Science.gov (United States)

    Lopes, Sónia; Graça, Patrícia; Teixeira, Salete; Serrano, Ana Maria; Squires, Jane

    2015-09-01

    The essential underlying foundations of Early Intervention (EI), in which parents/family play a critical role in their child's development, leads us to conclude that their contribution assessing early detection of problems is fundamental. The Ages & Stages Questionnaires (ASQ) is a standardized screening instrument that has been successfully studied in different countries and cultures. Translate and study the psychometrics proprieties of the Portuguese version of the 9, 18 and 30month questionnaires of the Ages and Stages Questionnaires, 3rd edition (ASQ-3). Cross-sectional study. Validity and reliability were studied in a sample of 234 parents of children within 9, 18 and 30months. The results indicated that the questionnaires had good internal consistency, strong agreement between observers and between observations with two weeks interval, and strong Pearson product-moment correlation coefficients between the overall and the total for each domain. The cutoff points (i.e. 2 standard deviations below the mean domain score), that identifies children who should receive further referral for more comprehensive assessment, were close to those determined in the original ASQ-3 psychometric studies. Cronbach's alpha ranging from .42 to .70 and Pearson's r values varies from .22 to .60. Although some weaknesses were noted in psychometric qualities analysis, it can be concluded that the ASQ-PT of 9, 18 and 30months of age fulfills the requirements of a screening tool validated for the Portuguese population. To allow the early identification of children with developmental problems. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  18. Ultrastructure of the ovary of Dermatobia hominis (Diptera: cuterebridae. I. Development during the 3rd larval instar

    Directory of Open Access Journals (Sweden)

    E. A. Gregorio

    1990-09-01

    Full Text Available The ultrastructure and distribution of gonial and somatic cells in the ovary of Dermatobia hominis was studied during the 3rd larval instar. In larvae weighing between 400 and 500 mg, the ovary is partially divided into basal and apical regions by oblong somatic cells that penetrate from the periphery; these cells show ovoid nucleus and cytoplasm full of microtubules. In both regions, gonial cells with regular outlines, large nucleus and low electron-density cytoplasm are scattered among the interstitial somatic cells. These later cells have small nucleus and electrodense cytoplasm. Clear somatic cells with small nucleus and cytoplasm of very low electron-density are restrict to the apical region of the gonad. Degenerating interstitial somatic cells are seen in the basal portion close to the ovary peduncle. During all this larval period the morphological features of the ovary remain almost the same. At the end of the period there is a gradual deposition of glycogen in the cytoplasm of the somatic cells, increase in the number and density of their mitochondria plus nuclear modification as membrane wrinkling and chromatin condensation in masses.

  19. Palaeopathology of human remains of the 1st century BC–3rd century AD from Armenia (Beniamin, Shirakavan I

    Directory of Open Access Journals (Sweden)

    Khudaverdyan Anahit Yu.

    2015-06-01

    Full Text Available The aim of this article was to document the pathology of the individuals from the archeological sites of Beniamin and Shirakavan I, Armenia, dated on the 1st century BC - 3rd century AD. The findings revealed that two groups differed in mean age at death of adults. At Beniamin it was 24 years, 40.8 years for males and 30.9 years for females, whereas at Shirakavanit it was 29.3 years, 29.6 years for males and 35.8 years for females. The greatest mortality appeared to have occurred when the children reached the age of one year (Beniamin. The population had high number of young-adult females with a cause of death associated with child-bearing. Very few females survived to old age. Traumatic conditions (63.64% and enamel hypoplasias (57.2% have a high frequency in the skeletal material from Shirakavan. The volume of selection of Shirakavan does not allow itself to so big discussion as it was possible with the Beniamin site. Fewer hypoplasias in Beniamin group indicate that food resources were more abundant and more easily exploited. The small frequency of a periodontal disorder indicates that dental hygiene was good during the Antiquity period. We here report a case of possible pituitary dwarfism and a case of decapitation.

  20. Influence of radiofrequency-electromagnetic waves from 3rd-generation cellular phones on fertilization and embryo development in mice.

    Science.gov (United States)

    Suzuki, Satoshi; Okutsu, Miho; Suganuma, Ryota; Komiya, Hiromi; Nakatani-Enomoto, Setsu; Kobayashi, Shunsuke; Ugawa, Yoshikazu; Tateno, Hiroyuki; Fujimori, Keiya

    2017-09-01

    The purpose of this study was to evaluate the effects of 3rd-generation (3G) cellular phone radiofrequency-electromagnetic wave (RF-EMW) exposure on fertilization and embryogenesis in mice. Oocytes and spermatozoa were exposed to 3G cellular phone RF-EMWs, 1.95 GHz wideband code division multiple access, at a specific absorption rate of 2 mW/g for 60 min, or to sham exposure. After RF-EMW exposure, in vitro fertilization and intracytoplasmic sperm injection were performed. Rates of fertilization, embryogenesis (8-cell embryo, blastocyst), and chromosome aberration were compared between the combined spermatozoa and oocyte groups: both exposed, both non-exposed, one exposed, and the other non-exposed. Rates of fertilization, embryogenesis, and blastocyst formation did not change significantly across the four groups. Considering that the degree of exposure in the present study was ≥100 times greater than daily exposure of human spermatozoa and even greater than daily exposure of oocytes, the present results indicate safety of RF-EMW exposure in humans. Bioelectromagnetics. 38:466-473, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  1. Technical Optimization of Cross-Platform Software Development Process quality and Usability of 3rd-Party Tools

    Directory of Open Access Journals (Sweden)

    Yevgueny Kondratyev

    2016-03-01

    Full Text Available The article exposes developer's point of view on minimizing creation, upgrade, post-release problem solving time for applications and components, targeted to multiple operating systems, while keeping high end product quality and computational performance. Non-uniformity of analogous tools and components, available on different platforms, causes strong impact on developer's productivity. In part., differences in 3rd-party component interfaces, versions, quality of distinct functions, cause frequent switching developer's attention on issues not connected (in principle with the target project. While loss of development performance because of attention specifics is more subjective value, at least physical time spent on tools/components misbehavior compensation and normal tools configuring is measurable. So, the main thesis verified is whether it's possible to increase continuity of the development process by technical improvements only, and by which value. In addition, a novel experimental tool for interactive code execution is described, allowing for deep changes in the working program without its restart. Question under research: minimizing durations of programming-build-test-correct loop and small code parts runs, in part., improving the debugging workflow for the account of combining the interactive editor and the debugger.

  2. From Bottom to Top: Identification to Precision Measurement of 3rd-Generation Quarks with the ATLAS Detector

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00335926

    The 3rd-generation quarks, bottom ($b$) and top ($t$), are recent additions to the Standard Model of particle physics, and precise characterization of their properties have important implications to searching for new physics phenomena. This thesis presents two analyses which use 4.6 fb$^{-1}$ of $pp$ collision data at $\\sqrt{s} = 7$ TeV collected by the ATLAS detector at the Large Hadron Collider (LHC) to measure their properties. The first is an analysis which measures our ability to identify jets originating from $b$ quarks with machine-learning algorithms applied to simulated and real data, so the result in simulation can be corrected to match that in data. This measurement has implications for our ability to identify processes with b quarks in their final state; $t$ quarks decay to a $b$ quark and a weak vector boson $W$ more than 99% of the time. The second analysis presented measures properties of the $t \\rightarrow Wb$ decay channel associated with phenomena not predicted by the Standard Model, through...

  3. The 3rd Canadian Symposium on Hepatitis C Virus: Expanding Care in the Interferon-Free Era

    Directory of Open Access Journals (Sweden)

    Sonya A MacParland

    2014-01-01

    Full Text Available Hepatitis C virus (HCV currently infects approximately 250,000 individuals in Canada and causes more years of life lost than any other infectious disease in the country. In August 2011, new therapies were approved by Health Canada that have achieved higher response rates among those treated, but are poorly tolerated. By 2014/2015, short-course, well-tolerated treatments with cure rates >95% will be available. However, treatment uptake is poor due to structural, financial, geographical, cultural and social barriers. As such, ‘Barriers to access to HCV care in Canada’ is a crucial topic that must be addressed to decrease HCV disease burden and potentially eliminate HCV in Canada. Understanding how to better care for HCV-infected individuals requires integration across multiple disciplines including researchers, clinical services and policy makers to address the major populations affected by HCV including people who inject drugs, baby boomers, immigrants and Aboriginal and/or First Nations people. In 2012, the National CIHR Research Training Program in Hepatitis C organized the 1st Canadian Symposium on Hepatitis C Virus (CSHCV in Montreal, Quebec. The 2nd CSHCV was held in 2013 in Victoria, British Columbia. Both symposia were highly successful, attracting leading international faculty with excellent attendance leading to dialogue and knowledge translation among attendees of diverse backgrounds. The current article summarizes the 3rd CSHCV, held February 2014, in Toronto, Ontario.

  4. Seismic b-value anomalies prior to the 3rd January 2016, Mw = 6.7 Manipur earthquake of northeast India

    Science.gov (United States)

    Borgohain, Jayanta Madhab; Borah, Kajaljyoti; Biswas, Rajib; Bora, Dipok K.

    2018-04-01

    Spatial variation of seismic b-value is estimated in the Indo-Myanmar subduction zone of northeast (NE) India using the homogeneous part of earthquake catalogue (1996-2015), recorded by International Seismological Center (ISC), consisting of 895 events of magnitude MW ≥ 3.9. The study region is divided into 1° × 1° square grids and b-values are estimated at each grid by maximum likelihood method. In this study, the b-value varies from 0.75 to 1.54 in the region. Significant variation of low b-value in the respective location may indicate high stress accumulation in that region. Spatial variation reveals intermediate b-value anomalies around the epicenter of the Mw = 6.7 Manipur earthquake which occurred on 3rd January at 23:05 UTC (4 January 2016 at 04:35 IST). The variations of b-values are also estimated with respect to depth. The low b-value associated with the depth range ∼15-55 km, which may imply crustal homogeneity and high stress accumulation in the crust. Since, NE India lies in the seismic zone V of the country; this study can be helpful to understand seismotectonics in the region.

  5. PREFACE: Special section featuring selected papers from the 3rd International Workshop on Numerical Modelling of High Temperature Superconductors Special section featuring selected papers from the 3rd International Workshop on Numerical Modelling of High Temperature Superconductors

    Science.gov (United States)

    Granados, Xavier; Sánchez, Àlvar; López-López, Josep

    2012-10-01

    The development of superconducting applications and superconducting engineering requires the support of consistent tools which can provide models for obtaining a good understanding of the behaviour of the systems and predict novel features. These models aim to compute the behaviour of the superconducting systems, design superconducting devices and systems, and understand and test the behavior of the superconducting parts. 50 years ago, in 1962, Charles Bean provided the superconducting community with a model efficient enough to allow the computation of the response of a superconductor to external magnetic fields and currents flowing through in an understandable way: the so called critical-state model. Since then, in addition to the pioneering critical-state approach, other tools have been devised for designing operative superconducting systems, allowing integration of the superconducting design in nearly standard electromagnetic computer-aided design systems by modelling the superconducting parts with consideration of time-dependent processes. In April 2012, Barcelona hosted the 3rd International Workshop on Numerical Modelling of High Temperature Superconductors (HTS), the third in a series of workshops started in Lausanne in 2010 and followed by Cambridge in 2011. The workshop reflected the state-of-the-art and the new initiatives of HTS modelling, considering mathematical, physical and technological aspects within a wide and interdisciplinary scope. Superconductor Science and Technology is now publishing a selection of papers from the workshop which have been selected for their high quality. The selection comprises seven papers covering mathematical, physical and technological topics which contribute to an improvement in the development of procedures, understanding of phenomena and development of applications. We hope that they provide a perspective on the relevance and growth that the modelling of HTS superconductors has achieved in the past 25 years.

  6. A DOE manual: DOE Methods for Evaluating Environmental and Waste Management Samples

    International Nuclear Information System (INIS)

    Goheen, S.C.; McCulloch, M.; Riley, R.G.

    1994-01-01

    Waste Management inherently requires knowledge of the waste's chemical composition. The waste can often be analyzed by established methods; however, if the samples are radioactive, or are plagued by other complications, established methods may not be feasible. The US Department of Energy (DOE) has been faced with managing some waste types that are not amenable to standard or available methods, so new or modified sampling and analysis methods are required. These methods are incorporated into DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods), which is a guidance/methods document for sampling and analysis activities in support of DOE sites. It is a document generated by consensus of the DOE laboratory staff and is intended to fill the gap within existing guidance documents (e. g., the Environmental Protection Agency's (EPA's) Test Methods for Evaluating Solid Waste, SW-846), which apply to low-level or non-radioactive samples. DOE Methods fills the gap by including methods that take into account the complexities of DOE site matrices. The most recent update, distributed in October 1993, contained quality assurance (QA), quality control (QC), safety, sampling, organic analysis, inorganic analysis, and radioanalytical guidance as well as 29 methods. The next update, which will be distributed in April 1994, will contain 40 methods and will therefore have greater applicability. All new methods are either peer reviewed or labeled ''draft'' methods. Draft methods were added to speed the release of methods to field personnel

  7. “New” Scythian Complex of the 3rd Century BC on the Right Bank of the Lower Dniester Region

    Directory of Open Access Journals (Sweden)

    Sergey N. Razumov

    2017-09-01

    Full Text Available The article deals with the new attribution of the materials from barrow 20, excavated in 1975 near Semenovka village on the right bank of the Dniester liman, Belgorod-Dnesterovsky district, Odessa region, Ukraine. The only burial of this barrow was still considered as the monument of Babino culture (aka Multi-Cordoned Ware culture of the first quarter of the 2nd millennium BC. The ceramic and metal artifacts found under the barrow were considered during the study of the material culture of the Scythians of the last third of the 1st millennium BC. The thorough analysis of the stratigraphy, planigraphy, funeral rite and artifacts showed that barrow 20 near Semenovka village was built instantaneously, and in fact it is Scythian. A cenotaph was the main complex of the barrow. It came with not only the armament items (iron-socketed arrowheads, spearheads and sockets of spears, horse harness (bronze frontlet with axe-shaped blade and a hook, bronze ringed beads, iron bits and iron snaffle ring, iron round pendants, glass cup, remains of the funeral feast as a ceramic breakage (Rhodes, Sinop, Cos, Cnidus amphorae, two pottery jars and molded vessel, but also with the burial of a dependent person lying crouched on his left side, his head in the eastern sector, in the catacomb. Depth of the fixing of these findings corresponded to the level of the ancient horizon on which the two-sided mainland ejected from the burial construction. Based on the Rhodes amphora marked with the eponym Άγήσιππος of - manufacturer - Έπίγονος 1, the barrow dates back to the last third or last quarter of the 3rd century BC.

  8. miR-345 in metastatic colorectal cancer: a non-invasive biomarker for clinical outcome in non-KRAS mutant patients treated with 3rd line cetuximab and irinotecan

    DEFF Research Database (Denmark)

    Schou, Jakob V; Rossi, Simona; Jensen, Benny V

    2014-01-01

    for overall survival (OS) in patients with metastatic colorectal cancer (mCRC) treated with cetuximab and irinotecan. METHODS: From 138 patients with mCRC in 3rd line therapy with cetuximab and irinotecan in a prospective phase II study, 738 pretreatment miRNAs were isolated and profiled from whole blood...... to treatment with cetuximab and irinotecan. CONCLUSION: We identified miR-345 in whole blood as a potential biomarker for clinical outcome. MiR-345 was a single prognostic biomarker for both OS and PFS in all patients and also in the non-KRAS mutant population....

  9. Implications And Legal Consequences Of Administrative Misconduct Law: Analysis Of The Performance Of The 3rd Prosecution Mprn Of Justice In The Circuit Court Of Caicó-Rn In Period 2010 2014

    Directory of Open Access Journals (Sweden)

    Winston de Araújo Teixeira

    2016-12-01

    Full Text Available This article aims to analyze and obtain data regarding the performance of the Public Ministry of RN meet the demands of improper conduct and how is the processing of these actions aiming to verify whether, in fact, Law Nº. 8.429/92 (of Misconduct Law administrative, it is an effective mechanism to combat and reprimand corruption. For this we used the historical-deductive method. He employed the documentary research held at the 3rd Prosecutor's Office of the District of Caicó / RN, combined with the data found on the website of the Court of Justice of Rio Grande do Norte state.

  10. Polycyclic Aromatic Hydrocarbons (PAHs) Content in Cattle Hides ...

    African Journals Online (AJOL)

    ADOWIE PERE

    ABSTRACT: Scrap rubber tyre is used as fuel for singeing animal carcasses in third world countries despite the fact that it can .... test method and the quantification of the PAH analytes using ... waste, SW-846 methods) with some modifications.

  11. The Study of Compound Quality of various Siam Weed (Eupatorium odoratum) Extracts and Toxicity Detoxification mechanisms Against 3rd Instar Larvae of Fruit Fly (Dacus dorsalis)

    International Nuclear Information System (INIS)

    Sutthivaiyakit, Pakawadee; Visetson, Suraphon; Sutthivaiyakit, Somyote; Patharakorn, Thipamon; Patharakorn, Surapol; Piadang, Patharakorn

    2006-09-01

    The 1H-NMR spectroscopy showed signals of DeltaH tild0.71.6 from hexane-leaf extracts from Siam weed (Eupatorium odoratum) These signals derive from protons of non-polar compounds which include fatty acid residues and terpinoids. In addition, the amplification of the signals indicated of some minor DeltaH tild6.2-7.7. This revealed protons from aromatic rings possibly involving in flavonoids from 1H-NMR spectrum. This is a believe that is a believe that these compounds could be varied from slightly polar compounds to moderately polar compounds. Furthermore, the Thin Layer Chromatography (TLC) of hexane, chloroform and methanol fractions showed the extracts composed of majority of less polar. It is and indication of the method of separation is quite food for separation of polarity basis from these extracts. Finally, the TLC of hexane fraction distinctively produced 7-8 compounds from the extracts. Toxicity testing using topical spray method showed that methnoloc extracts gave highest toxicity against 3rd instar larvae of fruit fly (Darcus dorsalis). The root extracts produced ca. 5 fold mohile GSH-S-transferase ws elevated 2-3 fold. The addition of dimethyl maleate into the extraccts increased their toxicity. The persistent experiment of eupathal from the extracts showed that the extracts can be stabilixed under aqueous solution upto 1 month with losing the compound. Finally, the Siam weed extracts prosuced non toxic to non-target organisms such as gabbies, bee, and mouse. The results of LC50 showed 15,000-26,000 mg/L 6,000-15,000 mg/L and 3,000-10,000 mg/L from hexane, chloroform and methanol extracts, respectively.

  12. Comprehensive risk reduction in patients with atrial fibrillation : Emerging diagnostic and therapeutic options Executive summary* of the report from the 3rd AFNET/EHRA consensus conference

    NARCIS (Netherlands)

    Kirchhof, Paulus; Lip, Gregory Y. H.; Van Gelder, Isabelle C.; Bax, Jeroen; Hylek, Elaine; Kaeaeb, Stefan; Schotten, Ulrich; Wegscheider, Karl; Boriani, Giuseppe; Ezekowitz, Michael; Diener, Hans; Heidbuchel, Hein; Lane, Deirdre; Mont, Luis; Willems, Stephan; Dorian, Paul; Vardas, Panos; Breithardt, Guenter; Camm, A. John

    2011-01-01

    There are exciting new developments in several areas of atrial fibrillation (AF) management that carry the hope of improving outcomes in AF patients. This paper is an executive summary that summarises the proceedings from the 3rd AFNET/EHRA consensus conference on atrial fibrillation, held in Sophia

  13. Moving from information and collaboration to action: report from the 3rd International Dog Health Workshop, Paris in April 2017.

    Science.gov (United States)

    O'Neill, Dan G; Keijser, Sylvia F A; Hedhammar, Åke; Kisko, Caroline; Leroy, Gregoire; Llewellyn-Zaidi, Aimée; Malm, Sofia; Olson, Patricia N; Packer, Rowena M A; Rousselot, Jean Francois; Seath, Ian J; Stull, Jason W; Bonnett, Brenda N

    2017-01-01

    Breed-related health problems in dogs have received increased focus over the last decade. Responsibility for causing and/or solving these problems has been variously directed towards dog breeders and kennel clubs, the veterinary profession, welfare scientists, owners, regulators, insurance companies and the media. In reality, all these stakeholders are likely to share some responsibility and optimal progress on resolving these challenges requires all key stakeholders to work together. The International Partnership for Dogs (IPFD), together with an alternating host organization, holds biennial meetings called the International Dog Health Workshops (IDHW). The Société Centrale Canine (French Kennel Club) hosted the 3rd IDHW, in Paris, in April, 2017. These meetings bring together a wide range of stakeholders in dog health, science and welfare to improve international sharing of information and resources, to provide a forum for ongoing collaboration, and to identify specific needs and actions to improve health, well-being and welfare in dogs. The workshop included 140 participants from 23 countries and was structured around six important issues facing those who work to improve dog health. These included individualized breed-specific strategies for health and breeding, extreme conformations, education and communication in relation to antimicrobial resistance, behavior and welfare, genetic testing and population-based evidence. A number of exciting actions were agreed during the meeting. These included setting up working groups to create tools to help breed clubs accelerate the implementation of breed-health strategies, review aspects of extreme conformation and share useful information on behavior. The meeting also heralded the development of an online resource of relevant information describing quality measures for DNA testing. A demand for more and better data and evidence was a recurring message stressed across all themes. The meeting confirmed the benefits from

  14. 3rd International School and Conference “Saint Petersburg OPEN 2016” on Optoelectronics, Photonics, Engineering and Nanostructures

    International Nuclear Information System (INIS)

    2016-01-01

    Dear Colleagues, 3rd International School and Conference “Saint Petersburg OPEN 2016” on Optoelectronics, Photonics, Engineering and Nanostructures was held on March 28 - 30, 2016 at St. Petersburg Academic University of the Russian Academy of Sciences. The School and Conference included a series of invited talks given by leading professors with the aim of introducing young scientists to the actual problems and major advances in modern physics and technology. The keynote speakers were Mircea Guina (Tampere University of Technology, Finland) Evgeny I. Terukov (Ioffe Institute RAS, Russia) Victor M. Ustinov (Ioffe Institute RAS, Russia) Peter G. Kazansky (University of Southampton, UK) Alexander O. Golubok (ITMO University, Russia) Georgy E. Cirlin (St Petersburg Academic University RAS, Russia) Levon V. Asryan (Virginia Polytechnic Institute and State University, USA) Andrey A. Lipovskii (Peter the Great St.Petersburg Polytechnic University, Russia) During the poster session all undergraduate and graduate students attending the conference presented their works. A large number of participants with more than 280 student attendees from all over the world allowed the Conference to provide a fertile ground for the fruitful discussions between the young scientists as well as to become a perfect platform for the valuable discussions between student authors and highly experienced scientists. The best student papers, which were selected by the Program Committee and by the invited speakers based on the theses and their poster presentation, were awarded with diplomas of the conference - see the photos. This year “Saint Petersburg OPEN 2016” is organized by St. Petersburg Academic University in cooperation with Peter the Great St. Petersburg Polytechnic University. The School and Conference is supported by the Russian Foundation for Basic Research (Project N 16-32-10060) , Russian Science Foundation, SPIE (The International Society for Optics and Photonics) and OSA (The

  15. PREFACE: 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015)

    Science.gov (United States)

    Gaol, F. L.

    2015-06-01

    The 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015), was held at The Westin Resort Nusa Dua, Bali on 31 January - 1 February 2015. The ScieTech 2015 conference is aimed to bring together researchers, engineers and scientists from around the world. ScieTech 2015 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within mathematics, chemistry and physics. As we already know that science and technology have brought tremendous benefits for human civilization. People are becoming healthier, wealthier, better educated, more peaceful, increasingly connected, and living longer. Of course, science and technology provide many answers to global challenges, but we will face more complex problems in the next decade due to increasing world population, limitation of energy, and climate change. Therefore, researchers should be more active in conducting research that enables collaboration between one and the others. Interdisciplinary cooperation is absolutely necessary in order to create a smart system for solving the global problems. We need a global and general long-term view of the future with long-range goals for solving complex problems in next decade. Therefore the conference was held to be a forum for researchers from different disciplines to start collaborating and conducting research that provides a solution to the global issues. The theme of ScieTech 2015 was ''The interdisciplinary Application between Mathematics, Chemistry and Physics to enhance the Quality of Life''. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting conference program as well as the invited and plenary speakers. This year, we received 197 papers and after rigorous review, 59 papers were accepted. The participants came from 19

  16. Development of WWER-440 fuel. Use of fuel assemblies of 2-nd and 3-rd generations with increased enrichment

    International Nuclear Information System (INIS)

    Vasilchenko, I.; Lushin, V.; Ananev, U.; Baranov, A.; Kukushkin, U.

    2009-01-01

    The problem of increasing the power of units at NPPs with WWER-440 is of current importance. There are all the necessary prerequisites for the above-stated problem as a result of updating the design of fuel assemblies and codes. The decrease of power peaking factor in the core is achieved by using profiled fuel assemblies, fuel-integrated burning absorber, FAs with modernized docking unit, modern codes, which allows decreasing conservatism of RP safety substantiation. A wide range of experimental studies of fuel behaviour has been performed which has reached burn-up of (50-60) MW·day/kgU in transition and emergency conditions, post-reactor studies of fuel assemblies, fuel rods and fuel pellets with a 5-year operating period have been performed, which prove high reliability of fuel, presence of a large margin in the fuel pillar, which helps reactor operation at increased power. The results of the work performed on introduction of 5-6 fuel cycles show that the ultimate fuel state on operability in WWER-440 reactors is far from being achieved. Neutron-physical and thermal-hydraulic characteristics of the cores of working power units with RP V-213 are such that actual (design and measured) power peaking factors on fuel assemblies and fuel rods, as a rule, are smaller than the maximum design values. This factor is a real reserve for power forcing. There is experience of operating Units 1, 2, 4 of the Kola NPP and Unit 2 of the Rovno NPP at increased power. Units of the Loviisa NPP are operated at 109 % power. During transfer to work at increased power it is reasonable to use fuel assemblies with increased height of the fuel pillar, which allows decreasing medium linear power distribution. Further development of the 2-nd generation fuel assembly design and consequent transition to working fuel assemblies of the 3-rd generation provides significant improvement of fuel consumption under the conditions of WWER-440 reactors operation with more continuous fuel cycles and

  17. THE CLINICAL EFFICACY OF FOSFOMYCIN TROMETAMOL VERSUS AMOXICILLIN-CLAVULANIC ACID IN THE TREATMENT OF SYMPTOMATİC AND ASYMPTOMATİC BACTERIURIA IN 3rd TRIMESTER PREGNANCY

    Directory of Open Access Journals (Sweden)

    Süleyman Akarsu

    2010-06-01

    Full Text Available PURPOSE: This study was conducted to assess the clinical efficacy of a single dose of fosfomycin trometamol for the treatment of both asymptomatic and symptomatic bacteriuria in the third trimester of pregnancy compared with a 7-day regimen of amoxicillin-clavulanic acid MATERIAL – METHODS: In this study clinical efficiency of single dose of 3 g fosfomycin trometamol and 7 day 675 mg amoxicillin-clavulanic acid were compared on 85 pregnant women in 3rd trimester with symptomatic and asymptomatic bacteriauria. Patients divided into four groups and single dose of fosfomycin trometamol applied on group 1 (asymptomatic bacteriauria patients and group 3 (symptomatic bacteriauria patients while 7 day 675 mg amoxicillin-clavulanic acid applied on group 2 (asymptomatic bacteriauria patients and group 4 (symptomatic bacteriauria patients. Microbiological assessments ( urine analyses and culture and rutine biochemical tests were performed before and at 7 days after the administration. No serious side effects have been reported related with both drugs. Negative urine cultures performed 7 days after the initial positive cultures were considered as bacteriological eradication and the absence of the initial urinary symptoms were considered as clinical success. RESULTS: Escherichia coli was the most frequently observed microorganism in urine culture of all four groups with clinical success and bacterial eradication of 95-100% of the patients treated with fosfomycin trometamol in groups 1 and 3, respectively and 95-90% of the patients treated with amoxicillin-clavulanic acid in groups 2 and 4, respectively. Both treatments were well tolerated in all groups without any serious side effects. No significant difference was detected between the success rates of both drugs. CONCLUSION: A single dose of fosfomycin trometamol is a safe and effective alternative in the treatment of both asymptomatic and symptomatic urinary tract infections in the third trimester of

  18. STUDY OF THYROID PROFILE BY USING ULTRA SENSITIVE 3 rd GENERATION THYROID ASSAY IN TYPE 2 DIABETES MELLITUS PATIENTS IN A TERTIARY CARE CENTER

    Directory of Open Access Journals (Sweden)

    Rahul Ladda

    2017-01-01

    Full Text Available BACKGROUND Diabetes mellitus is a common endocrine disorder which is defined as a group of metabolic diseases characterized by hyperglycaemia resulting from defects in insulin secretion, insulin action, or both. Recently few studies have shown that Thyroid dysfunction especially hypothyroidism is found in patients with Type 2 Diabetes Mellitus but the mechanism for this is largely unknown. Unrecognized thyroid dysfunction can impair metabolic control in diabetes and may even exaggerate cardiovascular risk. Prompt detection and treatment may reduce risk derangement of cellular metabolism in diabetes mellitus and help achieving metabolic control in diabetes. AIMS AND OBJECTIVES OF THE STUDY To find the prevalence rate of thyroid disorders in type 2 diabetes mellitus by using 3 rd generation thyroid assay and distribution of thyroid disorders in patients with Type 2 diabetes mellitus MATERIALS AND METHODS 150 patients diagnosed with type 2 diabetes mellitus or newly detected Type 2 diabetes mellitus without thyroid disorders attending outpatient departments and admitted to General medicine wards of Basaveshwar teaching and general hospital were included in this study. RESULTS Of the 150 patients with Diabetes 88 patients (58.66% were male and 62 patients (41.33% were male. The mean age in diabetic group 56.48±11.64 years. 84 patients (54% in Diabetic group had hypertension and 25 patients (16.7% diabetic group had coronary artery disease 43 patients (28.66% had abnormal thyroid profile in diabetic group of which 23 patients (53.5% had subclinical hypothyroidism and 16 patients (37.3 % had overt hypothyroidism 2 (4.6 % patients had subclinical hyperthyroidism and 2 (4.6% had overt hyperthyroidism. CONCLUSION The prevalence (28.8% of thyroid dysfunction was common in type 2 diabetes mellitus patients. Our study shows significant co relation between abnormal thyroid profile and glycaemic control, dyslipidaemia and duration of diabetes.

  19. Universal health coverage and intersectoral action for health: key messages from Disease Control Priorities, 3rd edition

    Science.gov (United States)

    Jamison, Dean T; Adeyi, Olusoji; Anand, Shuchi; Atun, Rifat; Bertozzi, Stefano; Bhutta, Zulfiqar; Binagwaho, Agnes; Black, Robert; Blecher, Mark; Bloom, Barry R; Brouwer, Elizabeth; Bundy, Donald A P; Chisholm, Dan; Cieza, Alarcos; Cullen, Mark; Danforth, Kristen; de Silva, Nilanthi; Debas, Haile T; Donkor, Peter; Dua, Tarun; Fleming, Kenneth A; Gallivan, Mark; Garcia, Patricia J; Gawande, Atul; Gaziano, Thomas; Gelband, Hellen; Glass, Roger; Glassman, Amanda; Gray, Glenda; Habte, Demissie; Holmes, King K; Horton, Susan; Hutton, Guy; Jha, Prabhat; Knaul, Felicia M; Kobusingye, Olive; Krakauer, Eric L; Kruk, Margaret E; Lachmann, Peter; Laxminarayan, Ramanan; Levin, Carol; Looi, Lai Meng; Madhav, Nita; Mahmoud, Adel; Mbanya, Jean Claude; Measham, Anthony; Medina-Mora, María Elena; Medlin, Carol; Mills, Anne; Mills, Jody-Anne; Montoya, Jaime; Norheim, Ole; Olson, Zachary; Omokhodion, Folashade; Oppenheim, Ben; Ord, Toby; Patel, Vikram; Patton, George C; Peabody, John; Prabhakaran, Dorairaj; Qi, Jinyuan; Reynolds, Teri; Ruacan, Sevket; Sankaranarayanan, Rengaswamy; Sepúlveda, Jaime; Skolnik, Richard; Smith, Kirk R; Temmerman, Marleen; Tollman, Stephen; Verguet, Stéphane; Walker, Damian G; Walker, Neff; Wu, Yangfeng; Zhao, Kun

    2018-01-01

    The World Bank is publishing nine volumes of Disease Control Priorities, 3rd edition (DCP3) between 2015 and 2018. Volume 9, Improving Health and Reducing Poverty, summarises the main messages from all the volumes and contains cross-cutting analyses. This Review draws on all nine volumes to convey conclusions. The analysis in DCP3 is built around 21 essential packages that were developed in the nine volumes. Each essential package addresses the concerns of a major professional community (eg, child health or surgery) and contains a mix of intersectoral policies and health-sector interventions. 71 intersectoral prevention policies were identified in total, 29 of which are priorities for early introduction. Interventions within the health sector were grouped onto five platforms (population based, community level, health centre, first-level hospital, and referral hospital). DCP3 defines a model concept of essential universal health coverage (EUHC) with 218 interventions that provides a starting point for country-specific analysis of priorities. Assuming steady-state implementation by 2030, EUHC in lower-middle-income countries would reduce premature deaths by an estimated 4·2 million per year. Estimated total costs prove substantial: about 9·1% of (current) gross national income (GNI) in low-income countries and 5·2% of GNI in lower-middle-income countries. Financing provision of continuing intervention against chronic conditions accounts for about half of estimated incremental costs. For lower-middle-income countries, the mortality reduction from implementing the EUHC can only reach about half the mortality reduction in non-communicable diseases called for by the Sustainable Development Goals. Full achievement will require increased investment or sustained intersectoral action, and actions by finance ministries to tax smoking and polluting emissions and to reduce or eliminate (often large) subsidies on fossil fuels appear of central importance. DCP3 is intended to

  20. Universal health coverage and intersectoral action for health: key messages from Disease Control Priorities, 3rd edition.

    Science.gov (United States)

    Jamison, Dean T; Alwan, Ala; Mock, Charles N; Nugent, Rachel; Watkins, David; Adeyi, Olusoji; Anand, Shuchi; Atun, Rifat; Bertozzi, Stefano; Bhutta, Zulfiqar; Binagwaho, Agnes; Black, Robert; Blecher, Mark; Bloom, Barry R; Brouwer, Elizabeth; Bundy, Donald A P; Chisholm, Dan; Cieza, Alarcos; Cullen, Mark; Danforth, Kristen; de Silva, Nilanthi; Debas, Haile T; Donkor, Peter; Dua, Tarun; Fleming, Kenneth A; Gallivan, Mark; Garcia, Patricia J; Gawande, Atul; Gaziano, Thomas; Gelband, Hellen; Glass, Roger; Glassman, Amanda; Gray, Glenda; Habte, Demissie; Holmes, King K; Horton, Susan; Hutton, Guy; Jha, Prabhat; Knaul, Felicia M; Kobusingye, Olive; Krakauer, Eric L; Kruk, Margaret E; Lachmann, Peter; Laxminarayan, Ramanan; Levin, Carol; Looi, Lai Meng; Madhav, Nita; Mahmoud, Adel; Mbanya, Jean Claude; Measham, Anthony; Medina-Mora, María Elena; Medlin, Carol; Mills, Anne; Mills, Jody-Anne; Montoya, Jaime; Norheim, Ole; Olson, Zachary; Omokhodion, Folashade; Oppenheim, Ben; Ord, Toby; Patel, Vikram; Patton, George C; Peabody, John; Prabhakaran, Dorairaj; Qi, Jinyuan; Reynolds, Teri; Ruacan, Sevket; Sankaranarayanan, Rengaswamy; Sepúlveda, Jaime; Skolnik, Richard; Smith, Kirk R; Temmerman, Marleen; Tollman, Stephen; Verguet, Stéphane; Walker, Damian G; Walker, Neff; Wu, Yangfeng; Zhao, Kun

    2018-03-17

    The World Bank is publishing nine volumes of Disease Control Priorities, 3rd edition (DCP3) between 2015 and 2018. Volume 9, Improving Health and Reducing Poverty, summarises the main messages from all the volumes and contains cross-cutting analyses. This Review draws on all nine volumes to convey conclusions. The analysis in DCP3 is built around 21 essential packages that were developed in the nine volumes. Each essential package addresses the concerns of a major professional community (eg, child health or surgery) and contains a mix of intersectoral policies and health-sector interventions. 71 intersectoral prevention policies were identified in total, 29 of which are priorities for early introduction. Interventions within the health sector were grouped onto five platforms (population based, community level, health centre, first-level hospital, and referral hospital). DCP3 defines a model concept of essential universal health coverage (EUHC) with 218 interventions that provides a starting point for country-specific analysis of priorities. Assuming steady-state implementation by 2030, EUHC in lower-middle-income countries would reduce premature deaths by an estimated 4·2 million per year. Estimated total costs prove substantial: about 9·1% of (current) gross national income (GNI) in low-income countries and 5·2% of GNI in lower-middle-income countries. Financing provision of continuing intervention against chronic conditions accounts for about half of estimated incremental costs. For lower-middle-income countries, the mortality reduction from implementing the EUHC can only reach about half the mortality reduction in non-communicable diseases called for by the Sustainable Development Goals. Full achievement will require increased investment or sustained intersectoral action, and actions by finance ministries to tax smoking and polluting emissions and to reduce or eliminate (often large) subsidies on fossil fuels appear of central importance. DCP3 is intended to

  1. The construction of the CMS electromagnetic calorimeter: delivery of the 3rd and 4th endcap "Dees" and Ring Flanges to CERN

    CERN Multimedia

    2006-01-01

    Delivery of the 3rd and 4th Dees and Ring Flanges of the CMS-ECAL endcaps to CERN. The pictures show also an endcap crystal with its VPT (Vacuum PhotoTriode), the aluminium blackplates of the endcap Dees and four mock supercrystals (5x5 crystals) attached in their position on the backplate, along with 138 positional spacers. Finally, endcap assembly in the CMS construction hall in Cessy (neighbouring France) is also shown.

  2. Medical students’ skills in image interpretation before and after training: A comparison between 3rd-year and 6th-year students from two different medical curricula

    International Nuclear Information System (INIS)

    Sendra-Portero, Francisco; Torales-Chaparro, Oscar E.; Ruiz-Gómez, Miguel J.

    2012-01-01

    The purpose of this study was to assess student's performance in the interpretation of images before and after training in radiology, by comparing two groups, 6th-year and 3rd-year students, from two different medical curricula. Students participated in an anonymous evaluation consisting of the interpretation of 12 radiological images accompanied with the salient history and clinical data by answering 60 open-ended questions about technique, anatomy, semiology, and clinics. The number of correct, incorrect and blank responses of each group was used to compare pre- and post-training results. Unpaired two-sample t-test was used to evaluate differences between groups. A significant increase in correct responses was found in both groups after training. The comparison between both groups did not show differences for incorrect answers of the whole test and correct answers about anatomy in the pre-training evaluation. The percentage of correct answers to the median question improved from 15.5% to 53.3% for 6th-year students and from 8.3% to 41.1% for 3rd-year students. The post-training evaluation showed a significant increase of correct answers of 6th-year students with respect to 3rd-year students (mean ± standard deviation 53.6 ± 31.3% and 38.7 ± 29.9% respectively), mainly due to differences in technical and clinical questions. This study provides objective and quantitative evidence of pre- and post-training student skills in image interpretation. The similarities found in the previous level of knowledge and skills of both groups emphasizes the suitable change of the first-time training in radiology, from the 6th to the 3rd year course in medical curricula.

  3. Radioactive waste management. Introductory statement of the 3rd scientific forum during the 44th session of the IAEA General Conference. Vienna, 19 September 2000

    International Nuclear Information System (INIS)

    ElBaradei, M.

    2000-01-01

    The document reproduces the text of the introductory statement made by the Director General of the IAEA at the 3rd scientific forum organized during the 44th session of the IAEA General Conference, Vienna, 19 september 2000, on the management of radioactive waste. He emphasized the following aspects: progress made in technology and public acceptance, global challenges, international co-operation, building a stronger framework

  4. Proceedings of the 3rd Biennial Conference of the Society for Implementation Research Collaboration (SIRC) 2015: advancing efficient methodologies through community partnerships and team science

    OpenAIRE

    Lewis, Cara; Darnell, Doyanne; Kerns, Suzanne; Monroe-DeVita, Maria; Landes, Sara J.; Lyon, Aaron R.; Stanick, Cameo; Dorsey, Shannon; Locke, Jill; Marriott, Brigid; Puspitasari, Ajeng; Dorsey, Caitlin; Hendricks, Karin; Pierson, Andria; Fizur, Phil

    2016-01-01

    Table of contents Introduction to the 3rd Biennial Conference of the Society for Implementation Research Collaboration: advancing efficient methodologies through team science and community partnerships Cara Lewis, Doyanne Darnell, Suzanne Kerns, Maria Monroe-DeVita, Sara J. Landes, Aaron R. Lyon, Cameo Stanick, Shannon Dorsey, Jill Locke, Brigid Marriott, Ajeng Puspitasari, Caitlin Dorsey, Karin Hendricks, Andria Pierson, Phil Fizur, Katherine A. Comtois A1: A behavioral economic perspective ...

  5. 'Apparently, women don't know how to operate doors': a corpus-based analysis of women stereotypes in the tv series 3rd Rock from the Sun

    OpenAIRE

    Gregori-Signes, Carmen

    2017-01-01

    This paper explores how women stereotypes are discursively evaluated in the TV sitcom 3rd Rock from the Sun, by paying attention to the societal, cultural and ideological values they convey. Following recent trends for the study of television series (Bednarek, 2010), the analysis is both qualitative and quantitative, adopting a Corpus-Assisted Discourse Analysis approach (Partington, 2004a; Baker, 2006). The contextualised analysis of words that refer to women confirms that the sitcom writers...

  6. The 3rd International Joint Conference ICIEOM-ADINGOR-IISE-AIM-ASEM (IJC2017) PROCEEDINGS - “New Global Perspectives on Industrial Engineering and Management”

    OpenAIRE

    Poler Escoto, Raúl; Mula Bru, Josefa; Díaz-Madroñero Boluda, Francisco Manuel; Sanchis Gisbert, Raquel

    2017-01-01

    The IJC2017 Proceedings contains the contributions presented in the 3rd International Joint Conference ICIEOM – ADINGOR – IISE – AIM - ASEM : “XXIII International Conference on Industrial Engineering and Operations Management”, “International ADINGOR Conference 2017”, “International IISE Conference 2017”, “International AIM Conference 2017” and “International ASEM Conference 2017”. This International Joint Conference is a result of an agreement among ADINGOR (Asociación para el Desarrollo ...

  7. “The 3 rd International Conference on Islamic Banking and Finance: Risk Management, Regulation and Supervision” Jakarta, Indonesia, 22-24 February 2010.

    OpenAIRE

    Only, Report

    2010-01-01

    The conference “3rd International Conference on Islamic Banking and Finance: Risk Management, Regulation and Supervision” was jointly organized by IRTI and Center of Islamic Economics and Business (PEBS) University of Indonesia and cohosted by Bank Indonesia. It started with a welcoming ceremony and dinner on 22nd of February. The ceremony was addressed by H. E. Sri Mulyani Indrawarti, then Minister of Finance, Republic of Indonesia (currently Executive Director at World Bank). In her speech ...

  8. Food Micro 2010, 22th International ICFMH Symposium, “ Microbial Behaviour in the Food Chain ” 30th August – 3rd September 2010, Copenhagen, Denmark

    DEFF Research Database (Denmark)

    2012-01-01

    This Special Issue of International Journal of Food Microbiology contains a selection of papers presented at Food Micro 2010, the 22th Symposium of the International Committee on Food Microbiology and Hygiene (ICFMH). Food Micro 2010 was held on 30th August to 3rd September 2010 in Copenhagen......, Denmark and organized in collaboration between the Danish Centre for Advanced Food Studies (LMC) and Lund University in Sweden....

  9. Study on applicability of evaluation model of manpower needs for dismantling of equipments in FUGEN-1. Dismantling process in 3rd/4th feedwater heater room

    International Nuclear Information System (INIS)

    Shibahara, Yuji; Izumi, Masanori; Nanko, Takashi; Tachibana, Mitsuo; Ishigami, Tsutomu

    2010-10-01

    Manpower needs for the dismantling process on the dismantling of equipments in FUGEN 3rd/4th feedwater heater room was calculated with the management data evaluation system (PRODIA Code), and it was inspected whether the conventional evaluation model had applicability for FUGEN or not. It was confirmed that the conventional evaluation model for feedwater heater had no applicability. In comparison of the calculated value with the actual data, we found two difference: 1) the calculated value were significantly larger than the actual data, 2) the actual data for the dismantling of 3rd feedwater heater was twice larger than that of 4th feedwater heater, though these equipments were almost same weight. It was found that these were brought 1) by the difference in the work descriptions of dismantling between JPDR and FUGEN, and 2) by that in the cutting number between 3rd feedwater heater and 4th one. The manpower needs for the dismantling of both feedwater heaters were calculated with a new calculation equation reflecting the descriptions of dismantling, and it was found that these results showed the good agreement with the actual data. (author)

  10. Results of the 3rd Review Meeting of the Convention on Nuclear Safety and Preparatory Works for the 4th Meeting

    International Nuclear Information System (INIS)

    Choi, Young Sung; Choi, Kwang Sik; Kim, Woong Sik

    2006-01-01

    The 3 rd Review Meeting of the Convention on Nuclear Safety (CNS) took place from April 11-22, 2005. Fifty out of fifty-five Contracting Parties (CPs) participated with over 500 delegates in attendance. It was concluded that all CPs in attendance were in compliance with the requirements of the CNS. It was also noted that although the focus tends to be on the triennial national reports and review meetings, the CNS should emphasize an ongoing process that continually promotes the advancement of nuclear safety. With regard to this continuity process, the President of the 3 rd Review Meeting sent to all the CPs a message to remind of the lessons offered and learned from the Meeting and to put them into action as well. The president also asked that the CPs start in earnest later this year their preparations for the Forth Meeting in 2008. This paper introduces the results of the 3 rd Review Meeting and presents some suggestions on preparatory works that should be done for the next Review Meeting

  11. 3rd harmonic electron cyclotron resonant heating absorption enhancement by 2nd harmonic heating at the same frequency in a tokamak

    International Nuclear Information System (INIS)

    Gnesin, S; Coda, S; Goodman, T P; Decker, J; Peysson, Y; Mazon, D

    2012-01-01

    The fundamental mechanisms responsible for the interplay and synergy between the absorption dynamics of extraordinary-mode electron cyclotron waves at two different harmonic resonances (the 2nd and 3rd) are investigated in the TCV tokamak. An enhanced 3rd harmonic absorption in the presence of suprathermal electrons generated by 2nd harmonic heating is predicted by Fokker–Planck simulations, subject to complex alignment requirements in both physical space and momentum space. The experimental signature for the 2nd/3rd harmonic synergy is sought through the suprathermal bremsstrahlung emission in the hard x-ray range of photon energy. Using a synthetic diagnostic, the emission variation due to synergy is calculated as a function of the injected power and of the radial transport of suprathermal electrons. It is concluded that in the present experimental setup a synergy signature has not been unambiguously detected. The detectability of the synergy is then discussed with respect to variations and uncertainties in the plasma density and effective charge in view of future optimized experiments. (paper)

  12. Book of abstracts of the 3rd International conference and the 3rd International School for young scientists Interaction of hydrogen isotopes with structural materials. IHISM-07; Tezisy dokladov Tret'ej mezhdunarodnoj konferentsii i Tret'ej mezhdunarodnoj Shkoly molodykh uchenykh i spetsialistov Vzaimodejstvie izotopov vodoroda s konstruktsionnymi materialami. IHISM-07

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The book involves abstracts of presentations at the 3rd International Conference and the 3rd International School for Young Scientists Interaction of Hydrogen Isotopes with Structural Materials (IHISM-07). The activities of Russian and foreign scientific centers associated with the use of hydrogen isotopes in power engineering, national economy and basic research are considered. The presentations cover the following areas: kinetics and interaction between hydrogen isotopes and solids including effects of radiogenic helium accumulation, hydrides and hydride transformations; structural transformations and mechanical properties; equipment and research techniques.

  13. Perilaku Seksual Ditinjau Dari Pemahaman Konsep Reproduksi Manusia, Perhatian Orang Tua Dan Jenis Kelamin Siswa Kelas III Semester Gasal SMA Negeri 5 Surakarta Tahun Pelajaran 2004/2005 (Sexual Behaviour on 3rd Grade Student of Sman 5 Surakarta (Academic Year 2004-2005) in Perspectives of Their Understanding Toward Human Reproduction, Parental Cares and Sexes)

    OpenAIRE

    Santoso, Slamet

    2006-01-01

    The aims of this research are to know the influence of (1) human reproduction understanding (2) parental cares, (3) sexes and (4) interaction of each factor toward the sexual behavior of the students. The method used in this research was descriptive-quantitative method by expost facto. Research was carried out upon 3 rd grade students of SMA N 5 Surakarta as the population that sampled. The sampling technique used was random sampling technique which sampled 120 students. The data collected by...

  14. Current practice of epidemiology in Africa: highlights of the 3rd conference of the African epidemiological association and 1st conference of the Cameroon society of epidemiology, Yaoundé, Cameroon, 2014.

    Science.gov (United States)

    Nkwescheu, Armand Seraphin; Fokam, Joseph; Tchendjou, Patrice; Nji, Akindeh; Ngouakam, Hermann; Andre, Bita Fouda; Joelle, Sobngwi; Uzochukwu, Benjamin; Akinroye, Kingsley; Mbacham, Wilfred; Colizzi, Vittorio; Leke, Rose; Victora, Cesar

    2015-01-01

    As the study of disease occurrence and health indicators in human populations, Epidemiology is a dynamic field that evolves with time and geographical context. In order to update African health workers on current epidemiological practices and to draw awareness of early career epidemiologists on concepts and opportunities in the field, the 3(rd) African Epidemiology Association and the 1st Cameroon Society of Epidemiology Conference was organized in June 2-6, 2014 at the Yaoundé Mont Febe Hotel, in Cameroon. Under the theme«Practice of Epidemiology in Africa: Stakes, Challenges and Perspectives», the conference attracted close to five hundred guest and participants from all continents. The two main programs were the pre-conference course for capacity building of African Early Career epidemiologists, and the conference itself, providing a forum for scientific exchanges on recent epidemiological concepts, encouraging the use of epidemiological methods in studying large disease burden and neglected tropical diseases; and highlighting existing opportunities.

  15. International Classification of Headache Disorders 3rd edition beta-based field testing of vestibular migraine in China: Demographic, clinical characteristics, audiometric findings and diagnosis statues.

    Science.gov (United States)

    Zhang, Yixin; Kong, Qingtao; Chen, Jinjin; Li, Lunxi; Wang, Dayan; Zhou, Jiying

    2016-03-01

    This study explored the clinical characteristics of vestibular migraine in Chinese subjects and performed a field test of the criteria of the International Classification of Headache Disorders 3rd edition beta version. Consecutive patients with vestibular migraine were surveyed and registered in a headache clinic during the study period. The diagnosis of vestibular migraine was made according to International Classification of Headache Disorders 3rd edition beta version. Assessments included standardized neuro-otology bedside examination, pure-tone audiogram, bithermal caloric testing, neurological imaging, cervical X-ray or magnetic resonance imaging, Doppler ultrasound of cerebral arteries and laboratory tests. A total of 67 patients (62 female/five male, 47.8 ± 10.3 years old) were enrolled in this study. The mean ages of migraine and vertigo onset were 32.2 ± 11.5 and 37.9 ± 10.1 years, respectively. The most common migraine subtype was migraine without aura (79%), followed by migraine with aura (12%) and chronic migraine (9%). The duration of vertigo attacks varied from seconds to days and 25% of patients had attacks that lasted less than 5 minutes. Among the patients with short-lasting attacks, 75% of these patients had ≥5 attacks per day within 72 hours. Auditory symptoms were reported in 36% of the patients. Migraine prophylactic treatments were effective in 77% of the patients. Our study showed that the clinical features of vestibular migraine in China were similar to those of Western studies. The definition of vertigo episodes and migraine subtypes of vestibular migraine in International Classification of Headache Disorders 3rd edition beta version might be modified further. More than five vertigo attacks per day within 72 hours might be helpful as far as identifying vestibular migraine patients with short-lasting attacks. © International Headache Society 2015.

  16. Irradiation experiments of 3rd, 4th and 5th fuel assemblies by an in-pile gas loop, OGL-1

    International Nuclear Information System (INIS)

    Fukuda, Kousaku; Kobayashi, Fumiaki; Hayashi, Kimio; Minato, Kazuo; Kikuchi, Teruo; Adachi, Mamoru; Iwamoto, Kazumi; Ikawa, Katsuichi; Itami, Hiroharu.

    1986-07-01

    Three irradiation experiments for 3rd, 4th and 5th fuel assemblies which had been composed of VHTR reference coated particle fuels and graphite components were carried out by an in-pile gas loop, OGL-1 during 1979 and 1982. The main purposes of these experiments were to study on bowing of the fuel rod by irradiation for the 3rd fuel assembly, to study on fuel behavior under relatively low burnup irradiation for the 4th fuel assembly, and to study on fuel behavior up to full burnup of VHTR design for the 5th fuel assembly. For understanding in-pile fuel behavior, fractional releases of fission gases from each fuel assembly were estimated by measuring the fission gas concentrations in the primary loop of OGL-1. The post-irradiation examination (PIE) was carried out extensively on the fuel block, the fuel rods and the fuel compacts in Tokai Hot Laboratory. Also, made were the measurements of metallic fission product distributions in the fuel assemblies and the fuel rods. The results in these experiments were given as follows ; bowing of the fuel rod in the 3rd fuel assembly was 0.7 mm, but integrity of the rod was kept under irradiation. Fractional release of the fission gas from the 4th fuel assembly remained in the order of 10 -7 during irradiation, suggesting that the fuel performance was excellent. The fractional release from the 5th fuel assembly, on the other hand, was in the order of 10 -5 which was the same level in the VHTR design. (author)

  17. Selected Abstracts of the 3rd Edition of Transport of High Risk Infants; Oxford (UK); August 31st-September 2nd, 2017

    OpenAIRE

    --- Various Authors

    2017-01-01

    Selected Abstracts of the 3rd Edition of Transport of High Risk Infants; Oxford (UK); August 31st-September 2nd, 2017ABS 1. MORTALITY RATE IN 23-30 WEEKS PRE­MATURE BORN IN LEVEL 2 HOSPITAL IN COMPARISON TO THOSE BORN IN TERTIARY-CARE HOSPITAL • J.P. Doray, J.L. DorayABS 2. THE QUEBEC AEROMEDICAL EXPERIENCE: EVACUATION OF NEONATES FROM AREAS IN EXTREME WEATHER CONDITIONS – IN­NOVATIONS IN SAFETY AND EFFICIENCY • É. Notebaert, J. Provencher, R. Bernier, S. Côté, S. KindABS 3. NASAL HIGH FLOW S...

  18. Modification of elastic stable intramedullary nailing with a 3rd nail in a femoral spiral fracture model - results of biomechanical testing and a prospective clinical study.

    Science.gov (United States)

    Kaiser, Martin M; Stratmann, Christine; Zachert, Gregor; Schulze-Hessing, Maaike; Gros, Nina; Eggert, Rebecca; Rapp, Marion

    2014-01-08

    Elastic stable intramedullary nailing (ESIN) is the standard treatment for displaced diaphyseal femoral fractures in children. However, high complication rates (10-50%) are reported in complex fractures. This biomechanical study compares the stiffness with a 3rd nail implanted to that in the classical 2C-shaped configuration and presents the application into clinical practice. For each of the 3 configurations of ESIN-osteosynthesis with titanium nails eight composite femoral grafts (Sawbones®) with an identical spiral fracture were used: 2C configuration (2C-shaped nails, 2 × 3.5 mm), 3CM configuration (3rd nail from medial) and 3CL configuration (3rd nail from lateral). Each group underwent biomechanical testing in 4-point bending, internal/external rotation and axial compression. 2C and 3CM configurations showed no significant differences in this spiroid type fracture model. 3CL had a significantly higher stiffness during anterior-posterior bending, internal rotation and 9° compression than 2C, and was stiffer in the lateral-medial direction than 3CM. The 3CL was less stable during p-a bending and external rotation than both the others. As biomechanical testing showed a higher stability for the 3CL configuration in two (a-p corresponding to recurvation and 9° compression to shortening) of three directions associated with the most important clinical problems, we added a 3rd nail in ESIN-osteosynthesis for femoral fractures. 11 boys and 6 girls (2.5-15 years) were treated with modified ESIN of whom 12 were '3CL'; due to the individual character of the fractures 4 patients were treated with '3CM' (third nail from medial) and as an exception 1 adolescent with 4 nails and one boy with plate osteosynthesis. No additional stabilizations or re-operations were necessary. All patients achieved full points in the Harris-Score at follow-up; no limb length discrepancy occurred. The 3CL configuration provided a significantly higher stiffness than 2C and 3CM configurations

  19. Simulations of Various Driving Mechanisms for the 3rd Order Resonant Extraction from the MedAustron Medical Synchrotron

    CERN Document Server

    Feldbauer, G; Dorda, U

    2011-01-01

    The MedAustron medical synchrotron is based on the CERN-PIMMS design and its technical implementation by CNAO [1]. This document elaborates on studies performed on the baseline betatron-core driven extraction method and investigates the feasibility of alternative resonance driving mechanisms like RF-knockout, RF-noise and the lattice tune. Single particle tracking results are presented, explained and compared to analytical results.

  20. Symposium on Turbulent Shear Flows (3rd), University of California, Davis, California, 9-11 September 1981.

    Science.gov (United States)

    1981-09-01

    34, 2 9. Deutscher Flammentag, Aachen, (1979), VDI -Bericht * Nr. 346 7 Yamaoka, I. and Tsuji, H. : "An Experimental Study of Flammability Limits Using...not exceed 23 amplitude of oscillations KHz. Thus. 1024. 2048 or 4096 points were sampled or critical value Scritical pase a gper period per channel...K Rohren," VDI -Forschungsheft, No. 361, 1933. z d = 0.439 ft. 7 Rodi, W., "Turbulence Models for Environmental .7_ X Problems," Prediction Methods

  1. The Effectiveness of Rule-Governed Democracy Classroom Management Style on Self-Esteem of 3rd-grade High School Male Students

    Directory of Open Access Journals (Sweden)

    H. Nazari

    2015-06-01

    Full Text Available By utilizing classroom management styles, teachers will be able to get rid of possible students’ misconducts and promote a friendly atmosphere which will in effect promote students’ participation in learning activities. Additionally, increased self-esteem, which is an achievement of such utilization, will influence various aspects of students’ future lives. Taking this point into consideration, the present study aimed at determining the efficacy of rule-governed democracy classroom management style on self-esteem of 3rd-grade high-school male students. All 3rd-grade high-school male students of Abdanan city in the academic year 2013 comprised the statistical population to this study. Using convenience sampling, 38 subjects were selected and randomly assigned to experimental and control groups. The research design was pretest-post-test. Cooper Smith's self-esteem questionnaire was used as the research instrument which was administered to the two groups at the outset. The experimental group was given seven 90-minutes sessions of treatment and twice-a-week. The two groups were asked to fill out the same questionnaire for the post-test stage afterwards. Descriptive statistics, including the analysis of covariance was used to analyze the data. The results revealed that the utilization of rule-governed democracy classroom management style in the classroom had significantly increased the self-esteem (public-family-social- and scholastic-professional of male students in the post-test (p<0/001.

  2. Supporting 3rd-grade students model-based explanations about groundwater: a quasi-experimental study of a curricular intervention

    Science.gov (United States)

    Zangori, Laura; Vo, Tina; Forbes, Cory T.; Schwarz, Christina V.

    2017-07-01

    Scientific modelling is a key practice in which K-12 students should engage to begin developing robust conceptual understanding of natural systems, including water. However, little past research has explored primary students' learning about groundwater, engagement in scientific modelling, and/or the ways in which teachers conceptualise and cultivate model-based science learning environments. We are engaged in a multi-year project designed to support 3rd-grade students' formulation of model-based explanations (MBE) for hydrologic phenomenon, including groundwater, through curricular and instructional support. In this quasi-experimental comparative study of five 3rd-grade classrooms, we present findings from analysis of students' MBE generated as part of experiencing a baseline curricular intervention (Year 1) and a modelling-enhanced curricular intervention (Year 2). Findings show that students experiencing the latter version of the unit made significant gains in both conceptual understanding and reasoning about groundwater, but that these gains varied by classroom. Overall, student gains from Year 1 to Year 2 were attributed to changes in two of the five classrooms in which students were provided additional instructional supports and scaffolds to enhance their MBE for groundwater. Within these two classrooms, the teachers enacted the Year 2 curriculum in unique ways that reflected their deeper understanding about the practices of modelling. Their enactments played a critical role in supporting students' MBE about groundwater. Study findings contribute to research on scientific modelling in elementary science learning environments and have important implications for teachers and curriculum developers.

  3. Orthotics, prosthesis and mobility aids (OPM dispensation in the Regional Health Department of the 3RD Region of Sao Paulo State

    Directory of Open Access Journals (Sweden)

    Camila Caminha Caro

    2014-12-01

    Full Text Available Objective: To identify the process of dispensation of orthotics, prostheses and mobility aids (OPM by the Unified Health System (SUS in the Regional Health Department of the 3rd Region (DRSIII of Sao Paulo state; perform a mapping of the existing physical rehabilitation services in that region; and subsequently correlate the data with applicable laws. Methodology: This is an exploratory cross-sectional qualitative study whose subjects were the main professionals involved in the process of OPM dispensation, or responsible for their acquisition flow in the cities of that region. Data collection was carried out through a semi-structured questionnaire, developed by the researchers themselves, composed of questions aiming to identify the physical rehabilitation centers in the towns, the staff members involved, the provision of assistive technology through SUS, delivery time and existence of waiting lists. Results and discussion: The data were statistically measured, categorized, described and correlated with the current legislation aimed to guarantee access to assistive technology. We observed that the practice around this resource in the 3rd region concentrates in a single care center, causing long waits and poor efficiency of the services provided, in addition to maintaining a paternalistic aspect. Conclusion: This study provides evidence that, although the right to access to assistive technology is legally guaranteed, there are still many difficulties and challenges around this practice.

  4. Lectures given at the 3rd Session of the Centro Internazionale Matematico Estivo (C.I.M.E.)

    CERN Document Server

    1989-01-01

    The C.I.M.E. Summer School at Como in 1986 was the first in that series on the subject of combinatorial optimization. Situated between combinatorics, computer science and operations research, the subject draws on a variety of mathematical methods to deal with problems motivated by real-life applications. Recent research has focussed on the connections to theoretical computer science, in particular to computational complexity and algorithmic issues. The Summer School's activity centered on the 4 main lecture courses, the notes of which are included in this volume:

  5. Conference Proceedings on Applied Computational Electromagnetics (3rd) Held in Monterey, California on 24-26 March 1987

    Science.gov (United States)

    1987-03-01

    Burke and A. J. Poggio, "Numerical Electromagnetics Code - Method of Moments", NOSC TD 116, Naval Ocean Systems Center, San Diego, CA, Jan. 81) and the...Tparaiiei 0 Pipelined Processor Tpipelined A Array (1I000) Tco!’current * CiS C I Td I I P__ STRA USs VWE Thesis Brief ing 2 D,, 87 Summary of Research...410 .1 L0.0 0.0 .0 31 .0 4C 4BD FIUE4 A DIGAS a 0 0s z I 0.0 10.0 20.0 30.0 40.0 SO.0 60.0 70.0 80.0 0.0 ELEMENT w FIGURE 5A 9 9 C3 0 O I1

  6. 8th World Congress on Engineering Asset Management & the 3rd International Conference on Utility Management & Safety

    CERN Document Server

    Mathew, Joseph; Wong, King; Lam, Rocky; Ko, CN; WCEAM 2013; ICUMAS; Engineering asset management : systems, professional practices and certification

    2015-01-01

    This proceedings represents state-of-the-art trends and developments in the emerging field of engineering asset management as presented at the Eight World Congress on Engineering Asset Management (WCEAM). The Proceedings of the WCEAM 2013 is an excellent reference for practitioners, researchers and students in the multidisciplinary field of asset management, covering topics such as: Asset condition monitoring and intelligent maintenance, 2.  Asset data warehousing, data mining and fusion, 3. Asset performance and level-of-service models, 4. Design and life-cycle integrity of physical assets, 5. Deterioration and preservation models for assets, 6. Education and training in asset management, 7. Engineering standards in asset management, 8. Fault diagnosis and prognostics, 9. Financial analysis methods for physical assets, 10. Human dimensions in integrated asset management, 11. Information quality management, 12. Information systems and knowledge management, 13. Intelligent sensors and devices, 14. Maintenance...

  7. Lectures given at the 3rd Session of the Centro Internazionale Matematico Estivo (C.I.M.E.)

    CERN Document Server

    1997-01-01

    Financial Mathematics is an exciting, emerging field of application. The five sets of course notes in this book provide a bird's eye view of the current "state of the art" and directions of research. For graduate students it will therefore serve as an introduction to the field while reseachers will find it a compact source of reference. The reader is expected to have a good knowledge of the basic mathematical tools corresponding to an introductory graduate level, and sufficient familiarity with probabilistic methods, in particular stochastic analysis. B. Biais, J.C. Rochet: Risk-sharing, adverse selection and market structure.- T. Björk: Interest-rate theory.- J. Cvitanic: Optimal trading under constraints.- N. El Karoui, M.C. Quenez: Nonlinear pricing theory and backward stochastic differential equations.- E. Jouini: Market imperfections, equilibrium and arbitrage.

  8. 3D MODELING OF HEADSTONES OF THE 2ND AND 3RD CENTURY BY LOW COST PHOTOGRAMMETRIC TECHNIQUES

    Directory of Open Access Journals (Sweden)

    T. Landes

    2013-07-01

    Full Text Available As a dozen headstones have been discovered during excavations in south Alsace, archaeologists stored them in the Regional Directorate of Cultural Affairs in Strasbourg. In order to complete the survey they are used to practice by hand on the steles, they asked the INSA Strasbourg to reconstruct at least the 7 figured sandstones in 3D. The high accuracy required by the archaeologists can be reached by an expensive technique using laserscanning system. Aim of the current work is to look for an alternative method and (if appropriate low cost software allowing to provide a similar quality and a sufficient level of details. The 3D reconstruction of the headstones based exclusively on multiple images processing is presented. The step of point cloud generation is detailed because it determines the final product quality. Therefore, an assessment of the produced point cloud has been performed through comparison to a reference point cloud obtained by laser scanning technique. The steps leading to the photo-realistic textured 3D models of the headstones are presented and the software used for that are evaluated. The final product respects the accuracy requirement of 1 mm desired by the archaeologists.

  9. Lectures given at the 3rd Session of the Centro Internazionale Matematico Estivo (C.I.M.E.)

    CERN Document Server

    Pulvirenti, Mario

    1993-01-01

    This volume contains the text of four sets of lectures delivered at the third session of the Summer School organized by C.I.M.E. (Centro Internazionale Matematico Estivo). These texts are preceded by an introduction written by C. Cercignani and M. Pulvirenti which summarizes the present status in the area of Nonequilibrium Problems in Many-Particle Systems and tries to put the contents of the different sets of lectures in the right perspective, in order to orient the reader. The lectures deal with the global existence of weak solutions for kinetic models and related topics, the basic concepts of non-standard analysis and their application to gas kinetics, the kinetic equations for semiconductors and the entropy methods in the study of hydrodynamic limits. CONTENTS: C. Cercignani, M. Pulvirenti: Nonequilibrium Problems in Many-Particle Systems. An Introduction.- L. Arkeryd: Some Examples of NSA in Kinetic Theory.- P.L. Lions: Global Solutions of Kinetic Models and Related Problems.- P.A. Markowich: Kinetic Mod...

  10. The research project on technical information basis for aging management in Fukui and Kinki area. 3rd report

    International Nuclear Information System (INIS)

    Fujimura, Kimiya; Watarumi, Chikae; Toudou, Tsugihiko

    2010-01-01

    The Research Project on Technical Information Basis for Aging Management was initiated in FY2006 by the Nuclear and Industrial Safety Agency (NISA) of the Ministry of Economy, Trade and Industry (METI), to promote aging management of domestic nuclear power plants. Its main objective was to improve the technical basis on which aging nuclear power plants are regulated. Upon taking part in the R and D Roadmaps for Aging Management and Safe Long Term Operation, the experiences and achievements of the participating organizations were taken into account and the following four topics were chosen. The regional characteristics of the Fukui and Kinki area where 15 nuclear power plants, mainly PWRs, and many nuclear related research institutes and universities are located, were also considered. (1) The improvement of pipe thinning management in nuclear power plants, (2) The development of inspection techniques to monitor the initiation and propagation of defects, (3) The development of a guideline for evaluating weld repair methods, (4) The development of a guideline for evaluating the degradation of main structures. To promote this research project, INSS has established a regional consortium (called the 'Fukui Regional Cluster' in coordination with universities, research institutes, electric utilities and venders in the Fukui and Kinki area. INSS is acting as a coordinator to make contracts, facilitate execution, and compile annual reports. In FY2009, 11 research subjects were proposed for this project and all were accepted. Of these, 4 subjects were related to the first topic (pipe thinning), 3 subjects to the second topic (inspection technique) and 1 subject to each of the other two topics (weld repair and main structures). All the subjects have been completed, fulfilling the requirements and expectations. (author)

  11. Report of the 3rd RCM on Improved High Current Liquid and Gas Targets for Cyclotron Produced Radioisotopes

    International Nuclear Information System (INIS)

    2009-01-01

    The overall objective of this CRP was the development of new accelerator targetry technology including several target systems but focusing on the reliable production of carbon-11 and fluorine-18 in various chemical forms with a view to increasing production yields, specific activity, improving the economics of production and the availability of the radiotracers. Significant advances have been made under this CRP in the development and standardization of high power gas and liquid targets. This CRP has resulted in the development of methods which can be used in high power targets to increase Carbon-11, Fluorine-18, Nitrogen-13, Iodine-123 and Krypton-81m, specific activities (a least a two fold increase), chemical purities as well as ensuring reliability of the production of the radiopharmaceuticals derived from these radionuclides. More importantly, these advances have minimized the unnecessarily operator exposure to radiation. In addition, knowledge of recovery and characterization of enriched H 2 18 O was also gained. Through this research the production capabilities with regard to [ 18 F]F - , [ 11 C]CO 2 and [ 11 C]CH 4 have increased 3 to 6 fold. A high current niobium target system has been designed, tested and put in service which could increase production capability of 18 FDG by a factor of 2.5. A survey of target maintenance procedures has been carried out and the results of this survey are reported in this CRP. It was determined that the tritium introduced by the inevitable nuclear reactions does not pose any health physics problems either during the tracer manufacturer or during potential water reclamation. It was further determined that radionuclides produced in the metal foil during irradiation are found in the target water at very low concentrations. These impurities can be essentially eliminated by using noble metal plated foils. The radionuclides can also be reduced by the separation technology typically used for fluorine extraction from the O-18

  12. Accommodation and vergence status among the 3rd and 4th graders in a mainstream school in Gauteng*

    Directory of Open Access Journals (Sweden)

    I. T. Metsing

    2012-12-01

    Full Text Available Aim: The data presented in this paper is obtained from the study on the prevalence of visual deficien-cies in mainstream and learning disabled schools which revealed no difference in the prevalence of visual deficiencies in both schools. One of the objectives of this study was to determine the visual status of each learner in each of the two groups (mainstream and learning disabled. The findings of the study revealed that both groups presented with different visual deficiencies including accommodation, vergence deficiencies and poor ocular motilities which can contribute towards influencing the children’s learning skills negatively. The visual profile on the accommodative and vergence systems of the children from the mainstream school is further analysed in this paper to determine the prevalence of deficiencies in the 8-13 year-olds, and to support inclusion of the evaluation of these visual skills in the school vision screening protocol. Method: One hundred and twelve (112 children had an expanded vision screening, with eighty (80 from the mainstream school in Johannesburg aged 8-13 years. The expanded vision screeningincluded the measurement of visual acuity (Snellen Acuity, refractive error (static retinoscopy, accommodation (accuracy, facility and amplitude, evaluation of the vergence system (accuracy, facility and amplitude and ocular motilities (direct ob-servation. Of the 80 children from the mainstream school, only 73 children’s results were consideredlearning performance of children, especially those of school-going-age. The study therefore supports the expanded vision screening of all school-going-children in South Africa to include visual efficiency skills (accommodation and vergence systems for appropriate and early identification of the barriers and seven subjects were excluded due to their poor responses to the tests.Kolmogorov-Smirnov test was utilized to assess the normality of distribution of accommodative and vergence

  13. 4 August 2011 - Austrian Head of Protocol, Directorate General III, Federal Ministry of Science and Research I. Friedrich (3rd from left) in the LHC superconducting magnet test hall with M. Benedkit, C. Wulz and C. Fabjan.

    CERN Multimedia

    Maximilien Brice

    2011-01-01

    4 August 2011 - Austrian Head of Protocol, Directorate General III, Federal Ministry of Science and Research I. Friedrich (3rd from left) in the LHC superconducting magnet test hall with M. Benedkit, C. Wulz and C. Fabjan.

  14. Motivation in school physical education: practice reports to teachers to students of 3rd secondary education series of state network paulista

    Directory of Open Access Journals (Sweden)

    Paulo César Cedran

    2016-05-01

    Full Text Available In the current design of School Physical Education the figure of the teacher should represent the mediation between knoledge and the teaching-learning process. So, thinking about the importance of the role that Professional in motivating students to participate in physical education classes, this paper aims reporting these experiences in building a concepto f physical education to arouse student’s interest in knowing it and the habito f practicing it. In this sense, our goal is to investigate and compare with schools in Pitangueiras/SP and Jaboticabal/SP cities, the motivational level of students in 3rd grade of High School in Physical Education classes, from the official curriculum implemented by the Department of Education of the State of São Paulo (ESS/SP in 2008.

  15. Cellars, stone wine and oil presses in the territory of Kelin (5th-3rd centuries BC: the case of la Alcantarilla ravine (Requena, Valencia

    Directory of Open Access Journals (Sweden)

    David Quixal Santos

    2016-11-01

    Full Text Available Archaeological evidences date the expansion of grape vineyards in the territory of the Iberian Iron Age city of Kelin from the 5th to 3rd centuries BC; although the origins are documented in the 7th BC. One of the singularities of this territory is the existence of outdoors stone structures for the production of wine and oil. All are located in a specific area of the territory (la Alcantarilla and Los Morenos ravines (Requena, Valencia, and are associated with archaeological materials that allow date them as Iberian. In this paper we approach the rural settlement pattern in la Alcantarilla ravine and we present in detail the archaeological sites of Rambla de la Alcantarilla and Solana de Cantos 2.

  16. Introducing ZBrush 3rd Edition

    CERN Document Server

    Keller, Eric

    2012-01-01

    Learn ZBrush inside and out with this updated new edition Get totally comfortable sculpting in a digital environment with the latest edition of this bestselling beginner's guide to ZBrush. Fully updated for the newest version of the software, ZBrush 4R3, this book dispels any fears you might have about the difficulty of using ZBrush and soon has you creating realistic, cartoon, and organic models with flair. Learn all the essentials, as you complete fun tutorials on painting, meshes, organic scripting, hard surface sculpting, lighting, rendering, and more. Introduces you to ZBrush, the sculpt

  17. Veterinary Microbiology, 3rd Edition

    Science.gov (United States)

    Veterinary Microbiology, Third Edition is organized into four sections and begins with an updated and expanded introductory section on infectious disease pathogenesis, diagnosis and clinical management. The second section covers bacterial and fungal pathogens, and the third section describes viral d...

  18. 3rd International Algebra Conference

    CERN Document Server

    Fong, Yuen; Zelmanov, Efim

    2003-01-01

    This volume contains one invited lecture which was presented by the 1994 Fields Medal­ ist Professor E. Zelmanov and twelve other papers which were presented at the Third International Conference on Algebra and Their Related Topics at Chang Jung Christian University, Tainan, Republic of China, during the period June 26-July 1, 200l. All papers in this volume have been refereed by an international referee board and we would like to express our deepest thanks to all the referees who were so helpful and punctual in submitting their reports. Thanks are also due to the Promotion and Research Center of National Science Council of Republic of China and the Chang Jung Christian University for their generous financial support of this conference. The spirit of this conference is a continuation of the last two International Tainan­ Moscow Algebra Workshop on Algebras and Their Related Topics which were held in the mid-90's of the last century. The purpose of this very conference was to give a clear picture of the rece...

  19. Sarmatian Attributes in Archaeological Complexes of Catacombs Burials in Arys Culture of Southern Kazakhstan (1st Century B.C. - 3rd Century A.D.

    Directory of Open Access Journals (Sweden)

    Podushkin Aleksandr Nikolaevich

    2015-12-01

    Full Text Available The publication is devoted to archaeological research of monuments of the catacomb of Arys culture of Southern Kazakhstan (1st Century B.C. - 3rd Century A.D.. Now scientists have a complete understanding of the range and typology, periodization and chronology of monuments of this culture. There are three stages: Karaultobe (4th century B.C. - 1st century A.D.; Karatobe (1st Century B.C. - 4th century A.D.; Altintobe (4th-6th centuries A.D.. These stages are characterized by specific clusters of signs in the form of artifacts. The author also carried out the ethnic attribution of the Arys culture in association with the ancient state Kangiuj. As a result of this work, the ethnicity of the state Kangiuj was revealed: in particular, late Saka’s, Sarmatian, Huns and Kangiuj ethnic components which are relevant to archaeological complexes, were identified. In the Arys monuments of culture the author discovered complexes of findings which associated with the Sarmatian world of Eurasia by their ethno-cultural parameters. They include typical for the Sarmatians list of ritual action and the funerary equipment, including weapons, bronze mirrors, ritual and religious objects, signs-tamgas, jewelry (including Egyptian faience, articles in “animal”, gold-turquoise and polychrome style. The characteristics of the burial complexes of catacombs of the Arys culture discussed in the publication and corresponding to chronological calculations and ethno-cultural interpretations, allow to speak about presence in the territory of South Kazakhstan of the Asian Sarmatians or any local branch of the Union of the Sarmatian tribes in the 1st century B.C. - 3rd century A.D.

  20. A standard analysis method (SAM) for the automated analysis of polychlorinated biphenyls (PCBs) in soils using the chemical analysis automation (CAA) paradigm: validation and performance

    International Nuclear Information System (INIS)

    Rzeszutko, C.; Johnson, C.R.; Monagle, M.; Klatt, L.N.

    1997-10-01

    The Chemical Analysis Automation (CAA) program is developing a standardized modular automation strategy for chemical analysis. In this automation concept, analytical chemistry is performed with modular building blocks that correspond to individual elements of the steps in the analytical process. With a standardized set of behaviors and interactions, these blocks can be assembled in a 'plug and play' manner into a complete analysis system. These building blocks, which are referred to as Standard Laboratory Modules (SLM), interface to a host control system that orchestrates the entire analytical process, from sample preparation through data interpretation. The integrated system is called a Standard Analysis Method (SAME). A SAME for the automated determination of Polychlorinated Biphenyls (PCB) in soils, assembled in a mobile laboratory, is undergoing extensive testing and validation. The SAME consists of the following SLMs: a four channel Soxhlet extractor, a High Volume Concentrator, column clean up, a gas chromatograph, a PCB data interpretation module, a robot, and a human- computer interface. The SAME is configured to meet the requirements specified in U.S. Environmental Protection Agency's (EPA) SW-846 Methods 3541/3620A/8082 for the analysis of pcbs in soils. The PCB SAME will be described along with the developmental test plan. Performance data obtained during developmental testing will also be discussed

  1. Effects of Deep Water Source-Sink Terms in 3rd generation Wave Model SWAN using different wind data in Black Sea

    Science.gov (United States)

    Kirezci, Cagil; Ozyurt Tarakcioglu, Gulizar

    2016-04-01

    Coastal development in Black Sea has increased in recent years. Therefore, careful monitoring of the storms and verification of numerical tools with reliable data has become important. Previous studies by Kirezci and Ozyurt (2015) investigated extreme events in Black Sea using different wind datasets (NCEP's CFSR and ECMWF's operational datasets) and different numerical tools (SWAN and Wavewatch III). These studies showed that significant effect to results is caused by the deep water source-sink terms (wave growth by wind, deep water dissipation of wave energy (whitecapping) and deep water non-linear wave-wave interactions). According to Timmermans(2015), uncertainty about wind forcing and the process of nonlinear wave-wave interactions are found to be dominant in numerical wave modelling. Therefore, in this study deep water source and sink term solution approaches of 3rd generation numerical tool (SWAN model) are tested, validated and compared using the selected extreme storms in Black Sea. 45 different storms and storm like events observed in Black Sea between years 1994-1999 are selected to use in the models. The storm selection depends on the instrumental wave data (significant wave heights, mean wave period and mean wave direction) obtained in NATO-TU Waves project by the deep water buoy measurements at Hopa, Sinop, Gelendzhik, and wind data (mean and peak wind speeds, storm durations) of the regarding events. 2 different wave growth by wind with the corresponding deep water dissipation terms and 3 different wave -wave interaction terms of SWAN model are used in this study. Wave growth by wind consist of two parts, linear growth which is explained by Cavaleri and Malanotte-Rizzoli(1981),and dominant exponential growth. There are two methods in SWAN model for exponential growth of wave, first one by Snyder et al. (1981), rescaled in terms of friction velocity by Komen et. al (1984) which is derived using driving wind speed at 10m elevation with related drag

  2. The Safety of Artemisinin Derivatives for the Treatment of Malaria in the 2nd or 3rd Trimester of Pregnancy: A Systematic Review and Meta-Analysis.

    Directory of Open Access Journals (Sweden)

    Stephanie D Kovacs

    Full Text Available Given the high morbidity for mother and fetus associated with malaria in pregnancy, safe and efficacious drugs are needed for treatment. Artemisinin derivatives are the most effective antimalarials, but are associated with teratogenic and embryotoxic effects in animal models when used in early pregnancy. However, several organ systems are still under development later in pregnancy. We conducted a systematic review and meta-analysis of the occurrence of adverse pregnancy outcomes among women treated with artemisinins monotherapy or as artemisinin-based combination therapy during the 2nd or 3rd trimesters relative to pregnant women who received non-artemisinin antimalarials or none at all. Pooled odds ratio (POR were calculated using Mantel-Haenszel fixed effects model with a 0.5 continuity correction for zero events. Eligible studies were identified through Medline, Embase, and the Malaria in Pregnancy Consortium Library. Twenty studies (11 cohort studies and 9 randomized controlled trials contributed to the analysis, with 3,707 women receiving an artemisinin, 1,951 a non-artemisinin antimalarial, and 13,714 no antimalarial. The PORs (95% confidence interval (CI for stillbirth, fetal loss, and congenital anomalies when comparing artemisinin versus quinine were 0.49 (95% CI 0.24-0.97, I2 = 0%, 3 studies; 0.58 (95% CI 0.31-1.16, I2 = 0%, 6 studies; and 1.00 (95% CI 0.27-3.75, I2 = 0%, 3 studies, respectively. The PORs comparing artemisinin users to pregnant women who received no antimalarial were 1.13 (95% CI 0.77-1.66, I2 = 86.7%, 3 studies; 1.10 (95% CI 0.79-1.54, I2 = 0%, 4 studies; and 0.79 (95% CI 0.37-1.67, I2 = 0%, 3 studies for miscarriage, stillbirth and congenital anomalies respectively. Treatment with artemisinin in 2nd and 3rd trimester was not associated with increased risks of congenital malformations or miscarriage and may be was associated with a reduced risk of stillbirths compared to quinine. This study updates the reviews

  3. Effect of carbon content on the microstructure and creep properties of a 3rd generation single crystal nickel-base superalloy

    Energy Technology Data Exchange (ETDEWEB)

    Li, X.W.; Liu, T. [Superalloys Division, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Wang, L., E-mail: wangli@imr.ac.cn [Superalloys Division, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Liu, X.G.; Lou, L.H. [Superalloys Division, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Zhang, J. [Superalloys Division, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China)

    2015-07-15

    Effect of carbon content on the microstructure and creep properties of a 3rd generation single crystal nickel-base superalloy has been investigated by the scanning electron microscope, X-ray computed tomography and electron probe microanalyzer. With the increase of the carbon content, MC carbides evolve from octahedral to well-developed dendrite, which promotes the formation of microporosity. Moreover, the volume fraction of porosity increases in the experimental alloys after solution heat treatment. As a result, the increase in the size of MC carbides and the porosity has a detrimental effect on the low temperature and high stress creep behavior of the alloys. The specimen crept at 850 °C and 586 MPa with the carbon content of 430 ppm shows the shortest rupture life due to the largest primary creep strain. However, the creep behavior of the alloy at 1120 °C and 140 MPa gets better as the carbon content increases from 88 to 430 ppm. TCP phase is observed near the fracture surfaces of the alloys, which explores as a potential cause for the creep rupture. However, the formation of TCP phase is effectively suppressed for decreasing segregation of the alloying elements, which results in the improvement of the creep life in the alloy with 430 ppm carbon at 1120 °C and 140 MPa.

  4. New considerations on the management of osteoporosis in Central and Eastern Europe (CEE): summary of the "3rd Summit on Osteoporosis-CEE", November 2009, Budapest, Hungary.

    Science.gov (United States)

    Lakatos, Péter; Balogh, Adám; Czerwinski, Edward; Dimai, Hans P; Hans, Didier; Holzer, Gerold; Lorenc, Roman S; Palicka, Vladimir; Obermayer-Pietsch, Barbara; Stepan, Jan; Takács, István; Resch, Heinrich

    2011-01-01

    In November 2009, the "3rd Summit on Osteoporosis-Central and Eastern Europe (CEE)" was held in Budapest, Hungary. The conference aimed to tackle issues regarding osteoporosis management in CEE identified during the second CEE summit in 2008 and to agree on approaches that allow most efficient and cost-effective diagnosis and therapy of osteoporosis in CEE countries in the future. The following topics were covered: past year experience from FRAX® implementation into local diagnostic algorithms; causes of secondary osteoporosis as a FRAX® risk factor; bone turnover markers to estimate bone loss, fracture risk, or monitor therapies; role of quantitative ultrasound in osteoporosis management; compliance and economical aspects of osteoporosis; and osteoporosis and genetics. Consensus and recommendations developed on these topics are summarised in the present progress report. Lectures on up-to-date data of topical interest, the distinct regional provenances of the participants, a special focus on practical aspects, intense mutual exchange of individual experiences, strong interest in cross-border cooperations, as well as the readiness to learn from each other considerably contributed to the establishment of these recommendations. The "4th Summit on Osteoporosis-CEE" held in Prague, Czech Republic, in December 2010 will reveal whether these recommendations prove of value when implemented in the clinical routine or whether further improvements are still required.

  5. Evidence of human-induced morphodynamic changes along the Campania coastal areas (southern Italy) since the 3rd-4th cent. AD

    Science.gov (United States)

    Russo Ermolli, Elda; Romano, Paola; Liuzza, Viviana; Amato, Vincenzo; Ruello, Maria Rosaria; Di Donato, Valentino

    2014-05-01

    Campania has always offered suitable climatic and physiographic conditions for human settlements since prehistoric times. In particular, many Graeco-Roman towns developed along its coasts starting from the 7th-6th cent. BC. In the last decade, geoarchaelogical surveys have been carried out in the archaeological excavations of Neapolis, Paestum and Elea-Velia allowing the main steps of the landscape evolution around these towns to be defined in detail. The greek town of Neapolis rose in the late 6th cent. BC [1] on a terrace overlooking a low-relief rocky coast surrounded by volcanic hills. Port activities developed in a protected bay facing the town from the 4th-2nd cent. BC up to the 4th cent. AD, as testified by the discovery of structures and shipwrecks [2, 3, 4]. Starting from the 3rd cent. AD a spit bar formed at the bay entrance causing the progressive establishment of a lagoon which was gradually filled up by alluvial inputs and completely closed in the 5th cent. AD. During the same period, episodes of increased alluvial inputs were also recorded further west along the coast, where a narrow sandy beach formed at the cliff toe. The greek town of Poseidonia, renamed Paestum by the Romans, was founded in the 540 BC on a travertine terrace facing the sandy littoral of a prograding coastal plain [5]. In front of the main town door, a coastal lagoon developed thanks to the growth of a dune ridge and was probably used for harbor activities [5]. After this period the shoreline shifted seawards, another dune ridge formed and the back-ridge depression was filled with fluvial-marshy deposits, slowly drying up. Phases of travertine deposition, which characterized the SE sector of the plain all along the Holocene, were recorded in the northern and southern quarters of the town in historical times and were connected to the abandonment of the town in the early Medieval times. The greek colony of Elea-Velia was located on top of a siliciclastic promontory where the ruins of

  6. Surviving and Thriving—Shifting the Public Health Response to HIV-Exposed Uninfected Children: Report of the 3rd HIV-Exposed Uninfected Child Workshop

    Directory of Open Access Journals (Sweden)

    Amy L. Slogrove

    2018-05-01

    Full Text Available Great gains were achieved with the introduction of the United Nations' Millennium Development Goals, including improved child survival. Transition to the Sustainable Development Goals (SDGs focused on surviving, thriving, and transforming, representing an important shift to a broader public health goal, the achievement of which holds the promise of longer-term individual and societal benefits. A similar shift is needed with respect to outcomes for infants born to women living with HIV (WLHIV. Programming to prevent vertical HIV transmission has been successful in increasingly achieving a goal of HIV-free survival for infants born to WLHIV. Unfortunately, HIV-exposed uninfected (HEU children are not achieving comparable health and developmental outcomes compared with children born to HIV-uninfected women under similar socioeconomic circumstances. The 3rd HEU Child Workshop, held as a satellite session of the International AIDS Society's 9th IAS Conference in Paris in July 2017, provided a venue to discuss HEU child health and development disparities. A summary of the Workshop proceedings follows, providing current scientific findings, emphasizing the gap in systems for long-term monitoring, and highlighting the public health need to establish a strategic plan to better quantify the short and longer-term health and developmental outcomes of HEU children.

  7. Phonological awareness and general performance in reading: What’s the relation? A study with 2nd and 3rd year fundamental school students

    Directory of Open Access Journals (Sweden)

    Ana Paula Couceiro Figueira

    2017-01-01

    Full Text Available The objective of this study was to test the content and concurrent validity of Prolec-R (FIGUEIRA; LOPES, n.d., investigation version, exploring the relations as a proof of phonological awareness (phoneme synthesis, SICOLE-R evaluation (FIGUEIRA; LOBO; LOPES; JIMÉNEZ, n.d., investigation version. The theoretical background comprises the evaluation of cognitive processes involved in reading (JIMENEZ’S and CUETOS’S perspectives, in which the two tests employed assume too evaluate such processes, and are considered concurrent procedures. Both are destined to children from 6 to 12 years old. The methodology used, for exploration and accessibility, a sample containing children from the 2nd and 3rd year of elementary school, from the public and education systems in Coimbra and Beira Interior Norte. The results revealed the existence of a positive and significant relation between the reading of words, reading of pseudo words, grammatical structures, punctuation marks and sentence comprehension (PROLEC-R and the phoneme synthesis (SICOLE-R.

  8. A psychometric study of the Bayley Scales of Infant and Toddler Development - 3rd Edition for term and preterm Taiwanese infants.

    Science.gov (United States)

    Yu, Yen-Ting; Hsieh, Wu-Shiun; Hsu, Chyong-Hsin; Chen, Li-Chiou; Lee, Wang-Tso; Chiu, Nan-Chang; Wu, Ying-Chin; Jeng, Suh-Fang

    2013-11-01

    The Bayley Scales of Infant and Toddler Development - 3rd Edition (Bayley-III) was updated to enhance its usefulness for contemporary child developmental assessment. However, recent data in Western countries have implicated the overestimation of child development by the new instrument. This study aimed to investigate the psychometric features of the Bayley-III for term and preterm infants in Taiwan. Forty-seven term infants and 167 preterm infants were prospectively examined with the Bayley Scales of Infant Development - 2nd Edition (BSID-II) and the Bayley-III at 6, 12, 18, and 24 months of age (corrected for prematurity). The psychometric properties examined included reliability, construct validity, and known-group validity. The intra- and inter-rater reliabilities of the Bayley-III were good to excellent. The correlations between the BSID-II and Bayley-III raw scores were good to excellent for the cognitive and motor items and low to excellent for the language items. Term infants achieved higher composite scores than preterm infants on all of the Bayley-III scales (pcognitive, language, and motor delay, respectively, as defined by the BSID-II index score<70. The Bayley-III is a reliable instrument that extends its previous edition, especially in early language assessment. However, the upward adjustment of its cut-off score is recommended for the accurate identification of developmental delay in term and preterm Taiwanese infants. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Application of statistical shape analysis for the estimation of bone and forensic age using the shapes of the 2nd, 3rd, and 4th cervical vertebrae in a young Japanese population.

    Science.gov (United States)

    Rhee, Chang-Hoon; Shin, Sang Min; Choi, Yong-Seok; Yamaguchi, Tetsutaro; Maki, Koutaro; Kim, Yong-Il; Kim, Seong-Sik; Park, Soo-Byung; Son, Woo-Sung

    2015-12-01

    From computed tomographic images, the dentocentral synchondrosis can be identified in the second cervical vertebra. This can demarcate the border between the odontoid process and the body of the 2nd cervical vertebra and serve as a good model for the prediction of bone and forensic age. Nevertheless, until now, there has been no application of the 2nd cervical vertebra based on the dentocentral synchondrosis. In this study, statistical shape analysis was used to build bone and forensic age estimation regression models. Following the principles of statistical shape analysis and principal components analysis, we used cone-beam computed tomography (CBCT) to evaluate a Japanese population (35 males and 45 females, from 5 to 19 years old). The narrowest prediction intervals among the multivariate regression models were 19.63 for bone age and 2.99 for forensic age. There was no significant difference between form space and shape space in the bone and forensic age estimation models. However, for gender comparison, the bone and forensic age estimation models for males had the higher explanatory power. This study derived an improved objective and quantitative method for bone and forensic age estimation based on only the 2nd, 3rd and 4th cervical vertebral shapes. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  10. Selected Abstracts of the 3rd Edition of Transport of High Risk Infants; Oxford (UK; August 31st-September 2nd, 2017

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2017-08-01

    Full Text Available Selected Abstracts of the 3rd Edition of Transport of High Risk Infants; Oxford (UK; August 31st-September 2nd, 2017ABS 1. MORTALITY RATE IN 23-30 WEEKS PRE­MATURE BORN IN LEVEL 2 HOSPITAL IN COMPARISON TO THOSE BORN IN TERTIARY-CARE HOSPITAL • J.P. Doray, J.L. DorayABS 2. THE QUEBEC AEROMEDICAL EXPERIENCE: EVACUATION OF NEONATES FROM AREAS IN EXTREME WEATHER CONDITIONS – IN­NOVATIONS IN SAFETY AND EFFICIENCY • É. Notebaert, J. Provencher, R. Bernier, S. Côté, S. KindABS 3. NASAL HIGH FLOW SUPPORT DURING NEONATAL RETRIEVAL IN VICTORIA, AUSTRALIA • V. Abraham, C. Roberts, B. Manley, L. Owen, M. Stewart, P. DavisABS 4. NEONATAL TRANSPORT TO AND FROM A REGIONAL LEVEL 2 CENTRE • C. Moore, M. Cassidy, M. Byrne, A. Bowden, J. Franta, I. Farombi, J. FitzsimonsABS 5. PASSIVE THERAPEUTIC HYPOTHERMIA DURING AMBULANCE AND HELICOPTER SECONDARY NEONATAL TRANSPORT IN NEONATES WITH HYPOXIC BRAIN INJURY: 10-YEARS RETROSPECTIVE SURVEY • M. Leben, M. Nolimal, I. Vidmar, S. GrosekABS 6. STABILIZATION OF CRITICALLY ILL NEW­BORNS: PREVENTION OF ACUTE KIDNEY INJURY • A. Babintseva, Y. Hodovanets, L. AgafonovaABS 7. TRANSPORT OF THE SURGICAL NEONATES • R. Pejaver, A. Poveidein, D. Winterbank-Scott, C. Keys, N. GuptaABS 8. AUDIT OF VENTILATED NEONATAL TRANS­FERS IN NORTHERN IRELAND FROM 1ST JANUARY 2017 UNTIL 1ST MAY 2017 • R. Moore, S. KnoxABS 9. “HUB AND SPOKE” ECMO IN NEONATES WITH MECONIUM ASPIRATION SYNDROME: A PRELIMINARY REPORT • N. Doglioni, D. Fichera, F. Zanella, M. Padalino, V. Vida, G. Stellin, P. Lago, D. TrevisanutoABS 10. INTRA-HOSPITAL TRANSPORTATION OF EX­TREMELY PRETERM INFANTS AND INCI­DENCE OF INTRAVENTRICULAR HAEMOR­RHAGES • N. Wadström, M. Breindahl, B. Hallberg, B. SkiöldABS 11. RISK OF POSTNATAL TRANSPORT AND OUT­COME OF LATE PRETERM INFANTS BORN AT NON-TERTIARY CENTRES: A RETRO­SPEC­TIVE COHORT STUDY • N. Doglioni, L. Salmaso, P. Facchin, D. TrevisanutoABS 12. COMPARING THREE METHODS OF THERA

  11. On the Discovery of Eastern Hellenistic Initiatory Altar of the 3rd – 1st Centuries BC Depicting the Plot of Bull Sacrifice in the City of Stavropol

    Directory of Open Access Journals (Sweden)

    Prokopenko Yuriy A.

    2016-10-01

    Full Text Available The article is devoted to the semantic and chronological analysis of the images on the plate of white tuff discovered in the city of Stavropol. The central part of the relief is occupied with the image of table – an altar with hoisted bull head (in the background and the hanging part of bull skin (in the foreground. Between the protruding edges of the hanging skin and lower to the ground (between the legs of the altar an ancient Greek phrase carved in three lines. The composition is completed by flanking images of two figures in long robes depicted in profile, symmetrically turned to the head of the bull. The figure at the right is an image of a man with a long beard, the lower edge of which is bent forward (priest or king. The figure at the left is a female (queen. Both the man and the woman are holding ritual vessels in hands. The plot of bull sacrifice is typical for the cultural traditions of ancient Greece as well as for ancient eastern states. The fact of combining images and inscriptions peculiar of the Hellenistic culture and ancient Iranian mythology on the Stavropol altar should be associated with the religious policy pursued by the Pontic kings since the second half of the 3rd century BC till the Common Era. This policy was focused on the gradual replacement of local cults by Greek ones in the official pantheon. The reasons for the Asia Minor altar existence in the Stavropol Upland include: 1 the military expeditions of the Sarmatians to Asia Minor in 2nd – 1st centuries BC; 2 the establishment of political and economic ties by the North Caucasus population with the state of Seleucids in the 2nd century BC, with Parthia in the 2nd – 1st centuries BC, and especially with the kingdom of Pontus in the 1st century BC.

  12. A novel amperometric alcohol biosensor developed in a 3rd generation bioelectrode platform using peroxidase coupled ferrocene activated alcohol oxidase as biorecognition system.

    Science.gov (United States)

    Chinnadayyala, Somasekhar R; Kakoti, Ankana; Santhosh, Mallesh; Goswami, Pranab

    2014-05-15

    Alcohol oxidase (AOx) with a two-fold increase in efficiency (Kcat/Km) was achieved by physical entrapment of the activator ferrocene in the protein matrix through a simple microwave based partial unfolding technique and was used to develop a 3rd generation biosensor for improved detection of alcohol in liquid samples. The ferrocene molecules were stably entrapped in the AOx protein matrix in a molar ratio of ~3:1 through electrostatic interaction with the Trp residues involved in the functional activity of the enzyme as demonstrated by advanced analytical techniques. The sensor was fabricated by immobilizing ferrocene entrapped alcohol oxidase (FcAOx) and sol-gel chitosan film coated horseradish peroxidase (HRP) on a multi-walled carbon nanotube (MWCNT) modified glassy carbon electrode through layer-by-layer technique. The bioelectrode reactions involved the formation of H2O2 by FcAOx biocatalysis of substrate alcohol followed by HRP-catalyzed reduction of the liberated H2O2 through MWCNT supported direct electron transfer mechanism. The amperometric biosensor exhibited a linear response to alcohol in the range of 5.0 × 10(-6) to 30 × 10(-4)mol L(-1) with a detection limit of 2.3 × 10(-6) mol L(-1), and a sensitivity of 150 µA mM(-1) cm(-2). The biosensor response was steady for 28 successive measurements completed in a period of 5h and retained ~90% of the original response even after four weeks when stored at 4 °C. The biosensor was successfully applied for the determination of alcohol in commercial samples and its performance was validated by comparing with the data obtained by GC analyses of the samples. © 2013 Published by Elsevier B.V.

  13. Association between asthma and physical activity in Korean adolescents: the 3rd Korea Youth Risk Behavior Web-based Survey (KYRBWS-III).

    Science.gov (United States)

    Kim, Jae-Woo; So, Wi-Young; Kim, Yeon Soo

    2012-12-01

    Asthma is the leading chronic illness among children and adolescents in several nations. This study investigated the association between asthma and physical activity (PA). The findings in this study are based on the data obtained from the 2007 3rd Korea Youth Risk Behavior Web-Based Survey (KYRBWS-III), a cross-sectional survey of health-risk behaviours among a representative sample of Korean middle- and high-school students aged 13-18 years. This survey is conducted annually by the Korea Centers for Disease Control and Prevention. The 72 943 study subjects were selected using the complex sampling design of the survey. The association between asthma and PA was assessed by conducting multiple logistic regression analyses of the data by using the statistical software SPSS 17.0 Complex Sample. Compared with the adolescents without current asthma, significantly fewer adolescents with current asthma had a sedentary time of 3 h or less per day (odds ratio, 0.86; 95% confidence interval, 0.75-0.97). Sedentary time was defined as time spent watching television, surfing the Internet, or playing computer games and excluded the time spent doing homework or study during leisure time. The analysis was adjusted for age, gender, family affluence level (FAL), obesity, allergic rhinitis, atopy and smoking. With regard to participation in adequate vigorous or moderate PA, strengthening exercise or physical education class, no significant differences were found between the adolescent students with current asthma and those without current asthma. In addition, it was found that all PA had no significant differences in their effects on asthma severity (medication, inability to work and absence from school). Our results show that the amount of sedentary time influenced asthma prevalence; however, PA did not influence asthma prevalence in Korean adolescents.

  14. Animal Board Invited Review: Sheep birth distribution in past herds: a review for prehistoric Europe (6th to 3rd millennia BC).

    Science.gov (United States)

    Balasse, M; Tresset, A; Bălăşescu, A; Blaise, E; Tornero, C; Gandois, H; Fiorillo, D; Nyerges, É Á; Frémondeau, D; Banffy, E; Ivanova, M

    2017-12-01

    In temperate latitudes sheep have a seasonal reproductive behaviour, which imposes strong constraints on husbandry in terms of work organization and availability of animal products. During the last 50 years, researchers have focused on understanding the mechanisms driving small ruminants' reproduction cycles and finding ways to control them. This characteristic is inherited from their wild ancestor. However, the history of its evolution over the 10 millennia that separates present day European sheep from their Near Eastern ancestors' remains to be written. This perspective echoes archaeologists' current attempts at reconstructing ancient pastoral societies' socio-economical organization. Information related to birth seasonality may be retrieved directly from archaeological sheep teeth. The methodology consists of reconstructing the seasonal cycle record in sheep molars, through sequential analysis of the stable oxygen isotope composition (δ 18O) of enamel. Because the timing of tooth development is fixed within a species, inter-individual variability in this parameter reflects birth seasonality. A review of the data obtained from 10 European archaeological sites dated from the 6th to the 3rd millennia BC is provided. The results demonstrate a restricted breeding season for sheep: births occurred over a period of 3 to 4 months, from late winter to early summer at latitudes 43°N to 48°N, while a later onset was observed at a higher latitude (59°N). All conclusions concurred with currently held expectations based on present day sheep physiology, which, aside from the historical significance, contributes to the reinforcing of the methodological basis of the approach. Further study in this area will permit regional variability attributable to technical choices, within global schemes, to be fully reported.

  15. The ENCCA-WP7/EuroSarc/EEC/PROVABES/EURAMOS 3rd European Bone Sarcoma Networking Meeting/Joint Workshop of EU Bone Sarcoma Translational Research Networks; Vienna, Austria, September 24-25, 2015. Workshop Report

    NARCIS (Netherlands)

    Kager, L.; Whelan, J.; Dirksen, U.; Hassan, B.; Anninga, J.; Bennister, L.; Bovee, J.V.; Brennan, B.; Broto, J.M.; Brugieres, L.; Cleton-Jansen, A.M.; Copland, C.; Dutour, A.; Fagioli, F.; Ferrari, S.; Fiocco, M.; Fleuren, E.D.; Gaspar, N.; Gelderblom, H.; Gerrand, C.; Gerss, J.; Gonzato, O.; Graaf, W.T. van der; Hecker-Nolting, S.; Herrero-Martin, D.; Klco-Brosius, S.; Kovar, H.; Ladenstein, R.; Lancia, C.; Ledeley, M.C.; McCabe, M.G.; Metzler, M.; Myklebost, O.; Nathrath, M.; Picci, P.; Potratz, J.; Redini, F.; Richter, G.H.; Reinke, D.; Rutkowski, P.; Scotlandi, K.; Strauss, S.; Thomas, D; Tirado, O.M.; Tirode, F.; Vassal, G.; Bielack, S.S.

    2016-01-01

    This report summarizes the results of the 3rd Joint ENCCA-WP7, EuroSarc, EEC, PROVABES, and EURAMOS European Bone Sarcoma Network Meeting, which was held at the Children's Cancer Research Institute in Vienna, Austria on September 24-25, 2015. The joint bone sarcoma network meetings bring together

  16. ICOM2012: 3rd International Conference on the Physics of Optical Materials and Devices (Belgrade, Serbia, 2-6 September 2012)

    Science.gov (United States)

    Dramićanin, Miroslav D.; Antić, Željka; Viana, Bruno

    2013-11-01

    The 3rd International Conference on the Physics of Optical Materials and Devices (ICOM2012) was held in Belgrade (Serbia) from 2 to 6 September 2012 (figure 1). The conference was organized by the Vinča Institute of Nuclear Sciences, University of Belgrade (Serbia) and the Laboratoire de Chimie de la Matière Condensée de Paris (France), and supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia and Optical Society of America. ICOM2012 was a follow-up to the two previous, successful ICOM conferences held in Herceg Novi in 2006 and 2009. The conference aimed at providing a forum for scientists in optical materials to debate on: • Luminescent materials and nanomaterials • Hybrid optical materials (organic/inorganic) • Characterization techniques of optical materials • Luminescence mechanisms and energy transfers • Theory and modeling of optical processes • Ultrafast-laser processing of materials • Optical sensors • Medical imaging • Advanced optical materials in photovoltaics and biophotonics • Photothermal and photoacoustic spectroscopy and phenomena The conference stressed the value of a fundamental scientific understanding of optical materials. A particular accent was put on wide band-gap materials in crystalline, glass and nanocrystalline forms. The applications mainly involved lasers, scintillators and phosphors. Rare earth and transition metal ions introduced as dopants in various hosts were considered, and their impact on the optical properties were detailed in several presentations. This volume contains selected contributions of speakers and participants of the ICOM2012 conference. The conference provided a unique opportunity for about 200 scientists from 32 countries to discuss recent progress in the field of optical materials. During the three and half days, 21 invited talks and 52 contributed lectures were given, with a special event in memory of our dear colleague Professor Dr Tsoltan

  17. An Approach for the Analysis of Regulatory Analytes in High Level Radioactive Waste Stored at Hanford, Richland, Washington

    International Nuclear Information System (INIS)

    Wiemers, K.D.; Miller, M.; Lerchen, M.E.

    1999-01-01

    Radiation levels, salt concentration, and the oxidizing nature of the waste dictates modifications to the SW-846 methods. Modified methods will be used to meet target EQLs and QC currently in SW-846. Method modifications will be validated per SW-846 and HASQARD and will be documented consistent with WAC 173-303-910. The affect of modifications to holding times and storage conditions will be evaluated using techniques developed by Maskarinec and Bayne (1996). After validating the methods and performing the holding time study on a minimum of two Phase 1 candidate feed source tank wastes, DOE and Ecology will assess: whether different methods are needed, whether holding time/storage conditions should be altered, whether the high priority analyte list should be refined, and which additional tank waste needs to be characterized

  18. Evaluation of Wet Digestion Methods for Quantification of Metal Content in Electronic Scrap Material

    Directory of Open Access Journals (Sweden)

    Subhabrata Das

    2017-11-01

    Full Text Available Recent advances in the electronics sector and the short life-span of electronic products have triggered an exponential increase in the generation of electronic waste (E-waste. Effective recycling of E-waste has thus become a serious solid waste management challenge. E-waste management technologies include pyrometallurgy, hydrometallurgy, and bioleaching. Determining the metal content of an E-waste sample is critical in evaluating the efficiency of a metal recovery method in E-waste recycling. However, E-waste is complex and of diverse origins. The lack of a standard digestion method for E-waste has resulted in difficulty in comparing the efficiencies of different metal recovery processes. In this study, several solid digestion protocols including American Society for Testing and Materials (ASTM-D6357-11, United States Environment Protection Agency Solid Waste (US EPA SW 846 Method 3050b, ultrasound-assisted, and microwave digestion methods were compared to determine the metal content (Ag, Al, Au, Cu, Fe, Ni, Pb, Pd, Sn, and Zn of electronic scrap materials (ESM obtained from two different sources. The highest metal recovery (mg/g of ESM was obtained using ASTM D6357-11 for most of the metals, which remained mainly bound to silicate fractions, while a microwave-assisted digestion protocol (MWD-2 was more effective in solubilizing Al, Pb, and Sn. The study highlights the need for a judicious selection of digestion protocol, and proposes steps for selecting an effective acid digestion method for ESM.

  19. Around Semipalatinsk nuclear test site: progress of dose estimations relevant to the consequences of nuclear tests (a summary of 3rd Dosimetry Workshop on the Semipalatinsk nuclear test site area, RIRBM, Hiroshima University, Hiroshima, 9-11 of March, 2005).

    Science.gov (United States)

    Stepanenko, Valeriy F; Hoshi, Masaharu; Bailiff, Ian K; Ivannikov, Alexander I; Toyoda, Shin; Yamamoto, Masayoshi; Simon, Steven L; Matsuo, Masatsugu; Kawano, Noriyuki; Zhumadilov, Zhaxybay; Sasaki, Masao S; Rosenson, Rafail I; Apsalikov, Kazbek N

    2006-02-01

    The paper is an analytical overview of the main results presented at the 3rd Dosimetry Workshop in Hiroshima(9-11 of March 2005), where different aspects of the dose reconstruction around the Semipalatinsk nuclear test site(SNTS) were discussed and summarized. The results of the international intercomparison of the retrospective luminescence dosimetry(RLD) method for Dolon' village(Kazakhstan) were presented at the Workshop and good concurrence between dose estimations by different laboratories from 6 countries (Japan, Russia, USA, Germany, Finland and UK) was pointed out. The accumulated dose values in brick for a common depth of 10mm depth obtained independently by all participating laboratories were in good agreement for all four brick samples from Dolon' village, Kazakhstan, with the average value of the local gamma dose due to fallout (near the sampling locations) being about 220 mGy(background dose has been subtracted).Furthermore, using a conversion factor of about 2 to obtain the free-in-air dose, a value of local dose approximately 440 mGy is obtained, which supports the results of external dose calculations for Dolon': recently published soil contamination data, archive information and new models were used for refining dose calculations and the external dose in air for Dolon village was estimated to be about 500 mGy. The results of electron spin resonance(ESR) dosimetry with tooth enamel have demonstrated the notable progress in application of ESR dosimetry to the problems of dose reconstruction around the Semipalatinsk nuclear test site. At the present moment, dose estimates by the ESR method have become more consistent with calculated values and with retrospective luminescence dosimetry data, but differences between ESR dose estimates and RLD/calculation data were noted. For example mean ESR dose for eligible tooth samples from Dolon' village was estimated to be about 140 mGy(above background dose), which is less than dose values obtained by RLD and

  20. Establishment of reference values in a healthy population and interpretation of serum PTH concentrations in hemodialyzed patients according to the KDIGO Guidelines using the Lumipulse® G whole PTH (3rd generation) assay.

    Science.gov (United States)

    Cavalier, Etienne; Salsé, Margot; Dupuy, Anne-Marie; Bargnoux, Anne-Sophie; Watar, Florence; Souberbielle, Jean-Claude; Delanaye, Pierre; Cristol, Jean-Paul

    2018-04-01

    3rd generation PTH assays only detect the bioactive 1-84 fragment. Since standardization is still lacking, each new PTH assay requires to establish reference values and to assess the impact in the medical care of the mineral and bone disorders in hemodialyzed patients. Using Fujirebio Lumipulse G wPTH assay, serum PTH levels were measured in a population of 439 healthy subjects from France and Belgium PTH levels were also determined in 119 hemodialyzed patients. These patients were classified according to the KDIGO recommendation. Reference range was found to be 6.5 (90%CI: 6.0-7.0) - 41.8 (90% CI: 38.1-43.7). In hemodialysis patients, Passing-Bablock regression between 3rd generation PTH from Fujirebio and DiaSorin was DiaSorin = 1.01 xFujirebio-2.4 with a slope not different from 1.0(95%CI: 0.96-1.04) and a non-significant intercept, ranging from -6.0 to 0.1. Hemodialysis patients with a PTH concentration below 2-fold the Upper Limit of Normality (ULN), within the KDIGO range and upper 9-fold upper limit were respectively 33.6%, 54.6%, 11.8% (Fujirebio Lumipulse) and 36.1%, 51.3% and 12.6% (Diasorin Liaison). We determined a reference range with the 3rd generation PTH assay from Fujirebio. In a hemodialysis population, 3rd generation assays from Fujirebio and DiaSorin provide similar results. To the best of our knowledge, this is the first time that we can show similar PTH results obtained by 2 different 3rd generation PTH assays in healthy subjects and hemodialyzed patients without mathematically processing them. Copyright © 2018 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

  1. INVESTIGATION OF THE TOTAL ORGANIC HALOGEN ANALYTICAL METHOD AT THE WASTE SAMPLING CHARACTERIZATION FACILITY (WSCF)

    International Nuclear Information System (INIS)

    DOUGLAS JG; MEZNARICH HD, PHD; OLSEN JR; ROSS GA; STAUFFER M

    2008-01-01

    Total organic halogen (TOX) is used as a parameter to screen groundwater samples at the Hanford Site. Trending is done for each groundwater well, and changes in TOX and other screening parameters can lead to costly changes in the monitoring protocol. The Waste Sampling and Characterization Facility (WSCF) analyzes groundwater samples for TOX using the United States Environmental Protection Agency (EPA) SW-846 method 9020B (EPA 1996a). Samples from the Soil and Groundwater Remediation Project (S and GRP) are submitted to the WSCF for analysis without information regarding the source of the sample; each sample is in essence a 'blind' sample to the laboratory. Feedback from the S and GRP indicated that some of the WSCF-generated TOX data from groundwater wells had a number of outlier values based on the historical trends (Anastos 2008a). Additionally, analysts at WSCF observed inconsistent TOX results among field sample replicates. Therefore, the WSCF lab performed an investigation of the TOX analysis to determine the cause of the outlier data points. Two causes were found that contributed to generating out-of-trend TOX data: (1) The presence of inorganic chloride in the groundwater samples: at inorganic chloride concentrations greater than about 10 parts per million (ppm), apparent TOX values increase with increasing chloride concentration. A parallel observation is the increase in apparent breakthrough of TOX from the first to the second activated-carbon adsorption tubes with increasing inorganic chloride concentration. (2) During the sample preparation step, excessive purging of the adsorption tubes with oxygen pressurization gas after sample loading may cause channeling in the activated-carbon bed. This channeling leads to poor removal of inorganic chloride during the subsequent wash step with aqueous potassium nitrate. The presence of this residual inorganic chloride then produces erroneously high TOX values. Changes in sample preparation were studied to more

  2. The incidence and nature of injuries sustained on grass and 3rd generation artificial turf: a pilot study in elite Saudi National Team footballers.

    Science.gov (United States)

    Almutawa, M; Scott, M; George, K P; Drust, B

    2014-02-01

    To compare the incidence, severity and nature of injuries sustained by Saudi National Team footballers during match-play and training on natural grass and 3rd generation (3G) artificial turf. Injury data was collected on all Saudi National Team players competing at the Gulf Cup (Yemen December 2010: 3G) and the Asian Cup (Qatar January 2011; grass). A total of 49 players were studied (mean ± SD; Age 27 ± 4 yr; body mass 71.4 ± 6.7 kg; height 176.8 ± 6.3 cm; professional playing experience 9 ± 3 yr) of which 31 competed at the Gulf Cup, 32 at the Asian Cup (14 at both). A prospective cohort design was used to investigate the incidence, nature and severity of injuries sustained with data collected using a standardised injury questionnaire. All data were collected by the team physiotherapist with the definition of injury set at any injury that required player and clinician contact. Injury and exposure data were collected and reported for games, training and all football activity. A total of 82 injuries [incidence - 56.1 per 1000 h total game and training exposure] were recorded at the Asian Cup (grass) and 72 injuries [incidence - 37.9 per 1000 h total game and training exposure] were recorded at the Gulf Cup (3G). Incidence data for training, game and all football exposure injury rates were higher when playing on grass. The vast majority of injuries on both surfaces were very minor that, whilst requiring medical attention, did not result in loss of match/training exposure. Injuries that resulted in 1-3 days absence from training or game play had similar incidence rates (Grass: 7.4 vs. 3G: 7.4 injuries per 1000 h exposure). More severe injuries were less frequent but with a higher incidence when playing on grass. Lower limb injuries were the most common in both tournaments with a higher incidence on grass (Grass: 14.2 vs. 3G: 7.9 injuries per 1000 h exposure). Muscle injuries were the most frequent of all injuries with similar incidence rates on

  3. Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference & APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

    Science.gov (United States)

    2016-02-01

    The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme "Materials, Manufacturing and Systems for Tomorrow". For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC & APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on "Nanomaterials with Exceptional

  4. Stages of Geoinformation Evolution Related to the Territories Described in the Bible - from the 3Rd Millennium B.C. to Modern Times

    Science.gov (United States)

    Linsenbarth, Adam

    2012-09-01

    The paper presents consecutive stages of the evolution of geoinformation related to the territories of the events described in the Bible. Two geoinformation sources are presented: the Bible and non-Bible sources. In the Bible there is much, often some highly detailed information regarding terrain topography. The oldest non-Bible sources are incorporated in the ancient documents, which were discovered in Egypt and Mesopotamia. Some of them are related to the 3rd millen- nium B.C. The further stages are related to the onomasticons and itineraries written by travellers and pilgrims to the Holy Land. The most famous onomasticons include: onomasticons prepared by bishop Eusebius from Caesarea and those pre- pared by St. Jerome. One of the oldest maps of Palestine's territory is the so-called mosaic map of Madaba dated to 565. In the 15th century several Bible maps were edited. The most rapid evolution occurred in the 16th and 17* centuries, when the world famous cartographers such as Mercator and Ortelius edited several maps of Palestine's territory. Cartographers from several European countries edited more than 6,000 maps presenting the Biblical territories and Biblical events. Modem maps, based on detailed topographical surveys, were edited m the second half of the 19* and 20th centuries. W artykule przedstawiono kolejne etapy rozwoju geoinformacji dotyczącej terenówr biblijnych. Omówiono dwa źródła informacji, a mianowicie geoinformacje biblijne i pozabiblijne. W tekstach biblijnych można znaleźć wiele, często bardzo detalicznych informacji topograficznych. Najstarsze źródła pozabiblijne, to starożytne dokumenty odnalezione na terenach Egiptu i Mezopotamii. Niektóre z nich pochodzą z trzeciego milenium przed Chr. Kolejnym etapem geoinformacji były onomastikony oraz dzienniki podróży pisane przez podróżników i pielgrzymów do Ziemi Świętej. Do najbardziej znanych należy onomastikon sporządzony przez biskupa Euzebiusza z Cezarei oraz

  5. Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference and APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

    International Nuclear Information System (INIS)

    2016-01-01

    The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme 'Materials, Manufacturing and Systems for Tomorrow'. For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC and APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on &apos

  6. The association of relational and organizational job stress factors with sleep disorder: analysis of the 3rd Korean working conditions survey (2011).

    Science.gov (United States)

    Kim, Gyuree; Min, Bokki; Jung, Jaeyoup; Paek, Domyung; Cho, Sung-Il

    2016-01-01

    Sleep disorder is a disease that causes reduction in quality of life and work efficiency of workers. This study was performed to investigate the relationship between job-related stress factor and sleep disorder among wageworkers in Korea. This study was based on analysis of the 3rd Korean working conditions survey. We analyzed 35,902 workers whose employment status is wageworker. We classified the job-related stress factor into 12 sections. Logistic regression was performed to estimate the relationship between job-related stress factor and sleep disorder and Odds ratio and 95 % CI were calculated using the SPSS version 23.0 program. Many categories of Job-related stress factor were correlated with sleep disorder (8 of 12 for women, 10 of 12 for men). The results of the regression analysis, corrected for general and occupational characteristics, indicated that sleep disorder was significantly correlated with the following categories of job-related stress: discrimination experience (OR 3.37, 95 % CI = 2.49 ~ 4.56 in women, OR 1.96, 95 % CI = 1.53 ~ 2.51 in men), direct customer confrontation (OR 2.72, 95 % CI = 1.91 ~ 3.86 in women, OR 1.99, 95 % CI = 1.45 ~ 2.72 in men), emotional stress (OR 2.01, 95 % CI = 1.30 ~ 3.09 in men), work dissatisfaction (detailed) (OR 1.99, 95 % CI = 1.36 ~ 2.93 in men), work dissatisfaction (overall) (OR 2.30, 95 % CI = 1.66 ~ 3.20 in women, OR 2.40, 95 % CI = 1.88 ~ 3.08 in men), expression of opinion difficulty (OR 0.66, 95 % CI = 0.48 ~ 0.92 in women, OR 0.57, 95 % CI = 0.45 ~ 0.73 in men). A number of studies have reported that stress affects sleep disorder. In this study, many factors suspected to increase the risk of sleep disorder were added to previously known job stress factors. In particular, this study found a strong correlation between work-associated sleep disorder and relational and organizational job stress factors. Sleep disorder

  7. Mound No. 24 of the Alebastrovo I Burial Ground and the Problem of Succession Among the Early Nomadic Cultures of the Southern Urals in the 6th – 4th and 3rd – 1st Centuries BC

    Directory of Open Access Journals (Sweden)

    Denis V. Maryksin

    2017-03-01

    Full Text Available The article focuses on one of the burial mounds – Alebastrovo I, which is situated in the middle reaches of the Ural river. The analysis of the burial rite and grave goods reveals the combination of features peculiar of the culture of early nomads from the 6th to the 4th centuries BC and later features typical for the 3rd – 1st centuries BC. The collective nature of the burial in a large square pit (burial no. 2 relates to early features. Such burials are typical for the 5th and 4th centuries BC. But a dagger with a direct crosshair and a crescent-shaped pommel found in the burial belongs to the 3rd – 1st centuries BC. Findings of a mirror, a spoon and a whorl also deserve special attention. On formal grounds a mirror belongs to the type “Skripkin 1.6” – with a flat disk without roll and stick in the form of a triangular stem. They appeared in Sauromatian time, but were not widespread. Most of these mirrors refer to the turn of the eras – the first centuries AD. However, in our view the mirror from Alebastrovo I has the greatest similarity with the mirror disks of the so-called “musical” mirrors, which date back to the 2nd half of the 4th century BC. The bone spoon belongs to the type I, peculiar of the Sauromatian-time things of the 6th – 4th centuries BC. However, the pattern is similar to that on the handle of the bone products of later time – the 3rd – 2nd centuries BC. Clay whorl has a pattern in the form of 4 sectors, decorated with grooves and pits. Analogies are available on this ornament spindles from the 3rd – 2nd centuries BC of the Kara-Abyz culture in the Southern Urals. According to the set of attributes, this burial mound dated to the second half of the 3rd - 2nd centuries BC. The finds from this burial mound confirm the conclusion of the first explorer B. F. Zhelezchikov about continuity of the development of the early nomadic culture of this region in the 6th – 3rd centuries BC.

  8. Polychlorinated biphenyls (PCB) analysis report for solid sample from 219S tank 104

    International Nuclear Information System (INIS)

    Ross, G.A.

    1998-01-01

    A sample of solids was obtained from tank 104 of 219S via a peristaltic pump equipped with a stainless steel tube and Norprenel tubing (Phthalate free). The sample obtained in a glass jar with Teflon 2 lid, was analyzed for PCBs as Aroclor mixtures. A soxhlet extraction procedure was used to extract the Aroclors from the sample. Analysis was performed using dual column confirmation gas chromatography/electron capture detection (GC/ECD). The extraction method closely follows SW-846 method 3540C and the analysis follows SW-846 method

  9. Polychlorinated biphenyls (PCB) analysis report for solid sample for 219S tank 102

    International Nuclear Information System (INIS)

    Ross, G.A.

    1997-01-01

    One waste sample was analyzed (with duplicate, matrix spike, and matrix spike duplicate) for PCBs as Aroclor mixtures by the Inorganic/Organic Chemistry Group. A soxhlet extraction procedure was used for extraction of the Aroclors from the sample. Analysis was performed using dual column confirmation gas chromatography/electron capture detection (GC/ECD). Extraction follows closely method 354 C of SW-846, analysis follows SW-846 method 8082. A cross reference of laboratory sample number to the customer identification is given in a table

  10. Image Quality of 3rd Generation Spiral Cranial Dual-Source CT in Combination with an Advanced Model Iterative Reconstruction Technique: A Prospective Intra-Individual Comparison Study to Standard Sequential Cranial CT Using Identical Radiation Dose.

    Science.gov (United States)

    Wenz, Holger; Maros, Máté E; Meyer, Mathias; Förster, Alex; Haubenreisser, Holger; Kurth, Stefan; Schoenberg, Stefan O; Flohr, Thomas; Leidecker, Christianne; Groden, Christoph; Scharf, Johann; Henzler, Thomas

    2015-01-01

    To prospectively intra-individually compare image quality of a 3rd generation Dual-Source-CT (DSCT) spiral cranial CT (cCT) to a sequential 4-slice Multi-Slice-CT (MSCT) while maintaining identical intra-individual radiation dose levels. 35 patients, who had a non-contrast enhanced sequential cCT examination on a 4-slice MDCT within the past 12 months, underwent a spiral cCT scan on a 3rd generation DSCT. CTDIvol identical to initial 4-slice MDCT was applied. Data was reconstructed using filtered backward projection (FBP) and 3rd-generation iterative reconstruction (IR) algorithm at 5 different IR strength levels. Two neuroradiologists independently evaluated subjective image quality using a 4-point Likert-scale and objective image quality was assessed in white matter and nucleus caudatus with signal-to-noise ratios (SNR) being subsequently calculated. Subjective image quality of all spiral cCT datasets was rated significantly higher compared to the 4-slice MDCT sequential acquisitions (pspiral compared to sequential cCT datasets with mean SNR improvement of 61.65% (p*Bonferroni0.05spiral cCT with an advanced model IR technique significantly improves subjective and objective image quality compared to a standard sequential cCT acquisition acquired at identical dose levels.

  11. The crystal structure of a coxsackievirus B3-RD variant and a refined 9-angstrom cryo-electron microscopy reconstruction of the virus complexed with decay-accelerating factor (DAF) provide a new footprint of DAF on the virus surface.

    Science.gov (United States)

    Yoder, Joshua D; Cifuente, Javier O; Pan, Jieyan; Bergelson, Jeffrey M; Hafenstein, Susan

    2012-12-01

    The coxsackievirus-adenovirus receptor (CAR) and decay-accelerating factor (DAF) have been identified as cellular receptors for coxsackievirus B3 (CVB3). The first described DAF-binding isolate was obtained during passage of the prototype strain, Nancy, on rhabdomyosarcoma (RD) cells, which express DAF but very little CAR. Here, the structure of the resulting variant, CVB3-RD, has been solved by X-ray crystallography to 2.74 Å, and a cryo-electron microscopy reconstruction of CVB3-RD complexed with DAF has been refined to 9.0 Å. This new high-resolution structure permits us to correct an error in our previous view of DAF-virus interactions, providing a new footprint of DAF that bridges two adjacent protomers. The contact sites between the virus and DAF clearly encompass CVB3-RD residues recently shown to be required for binding to DAF; these residues interact with DAF short consensus repeat 2 (SCR2), which is known to be essential for virus binding. Based on the new structure, the mode of the DAF interaction with CVB3 differs significantly from the mode reported previously for DAF binding to echoviruses.

  12. United States - Japan Workshop on Dielectric and Piezoelectric Ceramics (3rd) Held in Toyama, Japan on November 9-12, 1986.

    Science.gov (United States)

    1987-07-30

    hydrothermal synthesis method, the oxalate method and the calcination -, method, and among various additives for low firing temperature. As a result. it was...were used as samples: 1) Powder produced by the hydrothermal synthesis method 2) Commercially available powder produced by the oxalate method 3) Powder...4Hii prepared by, coprecipitation in a mixed solution of TIC!- BaCI., and oxalic acid was -alcined at 800 C for I Hr in air. Caicinei BaTilO

  13. Effect of automated tube voltage selection, integrated circuit detector and advanced iterative reconstruction on radiation dose and image quality of 3rd generation dual-source aortic CT angiography: An intra-individual comparison.

    Science.gov (United States)

    Mangold, Stefanie; De Cecco, Carlo N; Wichmann, Julian L; Canstein, Christian; Varga-Szemes, Akos; Caruso, Damiano; Fuller, Stephen R; Bamberg, Fabian; Nikolaou, Konstantin; Schoepf, U Joseph

    2016-05-01

    To compare, on an intra-individual basis, the effect of automated tube voltage selection (ATVS), integrated circuit detector and advanced iterative reconstruction on radiation dose and image quality of aortic CTA studies using 2nd and 3rd generation dual-source CT (DSCT). We retrospectively evaluated 32 patients who had undergone CTA of the entire aorta with both 2nd generation DSCT at 120kV using filtered back projection (FBP) (protocol 1) and 3rd generation DSCT using ATVS, an integrated circuit detector and advanced iterative reconstruction (protocol 2). Contrast-to-noise ratio (CNR) was calculated. Image quality was subjectively evaluated using a five-point scale. Radiation dose parameters were recorded. All studies were considered of diagnostic image quality. CNR was significantly higher with protocol 2 (15.0±5.2 vs 11.0±4.2; p<.0001). Subjective image quality analysis revealed no significant differences for evaluation of attenuation (p=0.08501) but image noise was rated significantly lower with protocol 2 (p=0.0005). Mean tube voltage and effective dose were 94.7±14.1kV and 6.7±3.9mSv with protocol 2; 120±0kV and 11.5±5.2mSv with protocol 1 (p<0.0001, respectively). Aortic CTA performed with 3rd generation DSCT, ATVS, integrated circuit detector, and advanced iterative reconstruction allow a substantial reduction of radiation exposure while improving image quality in comparison to 120kV imaging with FBP. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  14. Comprehensive risk reduction in patients with atrial fibrillation: emerging diagnostic and therapeutic options--a report from the 3rd Atrial Fibrillation Competence NETwork/European Heart Rhythm Association consensus conference

    DEFF Research Database (Denmark)

    Kirchhof, Paulus; Lip, Gregory Y H; Van Gelder, Isabelle C

    2012-01-01

    While management of atrial fibrillation (AF) patients is improved by guideline-conform application of anticoagulant therapy, rate control, rhythm control, and therapy of accompanying heart disease, the morbidity and mortality associated with AF remain unacceptably high. This paper describes...... the proceedings of the 3rd Atrial Fibrillation NETwork (AFNET)/European Heart Rhythm Association (EHRA) consensus conference that convened over 60 scientists and representatives from industry to jointly discuss emerging therapeutic and diagnostic improvements to achieve better management of AF patients. The paper...

  15. International Symposium on Special Topics in Chemical Propulsion (3rd): Non-Intrusive Combustion Diagnostics Held in Scheveningen, Netherlands on 10-14 May 93

    Science.gov (United States)

    1993-05-14

    Gakuen-cho, Sakai Osaka 593 JAPAN K. Miyoshi Mazda Motor Corporation Fuchu-cho, Hiroshima 730-91 JAPAN M. Tsue Department of Mechanic Engineering...E. Kiishnan, A. J. Kurian, S. S. Rao and K N. Ninon 82 2:10 Method to Derive Solid Propellant Erosive Burning Rate Using Reactive Motor Pressure...Solid Propellant Strand In 2-D Motor by Means of Laser Scanning Device, S. Chen and J. Huang 186 PP-3.6 Influence of Internal Refractive Index

  16. Distribution and Fate of Energetics on DoD Test and Training Ranges

    Science.gov (United States)

    2004-11-01

    and the analytical procedure were slightly different even if the same GC method was used. CRREL has a HP6890 GC equipped with a Ni63 cell micro...The GC was an HP6890 equipped with a micro cell Ni63 ECD, and the analysis protocol followed the EPA SW-846 Method 8095 guidelines (Walsh and Ranney

  17. Currant imaging of the 3rd, 4th and 6th cranial nerves; Nevroradiologisk fremstilling av 3., 4. og 6. hjernenerve

    Energy Technology Data Exchange (ETDEWEB)

    Kerty, Emilia; Bakke, Soeren Jacob

    2001-07-01

    The ocular motor cranial nerves (III, IV, VI) control the eye movements in a near association with the higher cortical areas. Clinically, the most common presentation of abnormal ocular motility is double vision. Identifying the cause of ocular nerve pulsy can be difficult and a large percentage of such cases still remains undiagnosed, even in a new era of neuroradiological techniques. Close co-operation between the clinician and the radiologist is necessary for the selection of the best imaging methods for the specific clinical problem, in order to see the aetiological and topological diagnosis. The article provides a practical review of advances in neuroimaging of the ocular motor nerves. 4 figs., 2 tabs., 15 refs.

  18. Manual risk zoning wind turbines. Final version. 3rd updated version May 2013. 3 ed.; Handboek risicozonering windturbines. Eindversie. 3e geactualiseerde versie mei 2013

    Energy Technology Data Exchange (ETDEWEB)

    Faasen, C.J.; Franck, P.A.L.; Taris, A.M.H.W. [DNV KEMA, Arnhem (Netherlands)

    2013-05-15

    The title manual has been drafted to be able to quickly inventory the safety risks of wind turbines, which can speed up the licensing procedures for the installation of wind turbines. Attention is paid to the following categories: building areas, roads, waterways, railroads, industrial areas, underground cables and mains, aboveground cables, power transmission lines, dikes and dams, and telecommunication. For each of these categories the risks are calculated. This is an updated version of the manual which was first published in 2000 and updated in 2005 [Dutch] Dit is een actualisatie van het Handboek uit 2005. Het oorspronkelijke Handboek is in 2000 opgesteld. Het in 2000 verschenen Handboek is door ECN samengesteld in opdracht van Novem (nu: Agentschap NL) met als doel een uniforme methode te bieden voor het uitvoeren van kwantitatieve risicoanalyses en voor het toetsen van de resultaten aan acceptatiecriteria. Dit Handboek bood antwoord op de vraag van zowel projectontwikkelaars als overheden naar een algemeen geldende methode om veiligheidsrisico's van windturbines te berekenen voor diverse omgevingsaspecten. In 2005 is een actualisatie van het Handboek uitgebracht door ECN en KEMA in opdracht van SenterNovem (nu onderdeel van Agentschap NL). Daarin is verder ingegaan op turbines met grotere vermogens en is het Handboek aangevuld met rekenvoorbeelden. Vanwege de verdere ontwikkeling van de windturbinetechnologie, aangepaste wetgeving, het feit dat rekenmodellen verouderd waren en dat diverse infrastructuur steeds vaker gebundeld of geclusterd met windturbines wordt gerealiseerd, is het wenselijk / noodzakelijk de eventuele risico's op een consistente en eenduidige wijze in kaart te brengen. Daarom heeft Agentschap NL in 2012 opdracht gegeven aan DNV KEMA om het Handboek opnieuw te actualiseren. Hierbij zijn de resultaten van het rapport: 'Rekenmethodiek zonering windturbines in relatie tot gas- en elektrische infrastructuur' (2012), dat in

  19. Central neuropeptide Y receptors are involved in 3rd ventricular ghrelin induced alteration of colonic transit time in conscious fed rats

    Directory of Open Access Journals (Sweden)

    Ritter Michael

    2005-02-01

    Full Text Available Abstract Background Feeding related peptides have been shown to be additionally involved in the central autonomic control of gastrointestinal functions. Recent studies have shown that ghrelin, a stomach-derived orexigenic peptide, is involved in the autonomic regulation of GI function besides feeding behavior. Pharmacological evidence indicates that ghrelin effects on food intake are mediated by neuropeptide Y in the central nervous system. Methods In the present study we examine the role of ghrelin in the central autonomic control of GI motility using intracerobroventricular and IP microinjections in a freely moving conscious rat model. Further the hypothesis that a functional relationship between NPY and ghrelin within the CNS exists was addressed. Results ICV injections of ghrelin (0.03 nmol, 0.3 nmol and 3.0 nmol/5 μl and saline controls decreased the colonic transit time up to 43%. IP injections of ghrelin (0.3 nmol – 3.0 nmol kg-1 BW and saline controls decreased colonic transit time dose related. Central administration of the NPY1 receptor antagonist, BIBP-3226, prior to centrally or peripherally administration of ghrelin antagonized the ghrelin induced stimulation of colonic transit. On the contrary ICV-pretreatment with the NPY2 receptor antagonist, BIIE-0246, failed to modulate the ghrelin induced stimulation of colonic motility. Conclusion The results suggest that ghrelin acts in the central nervous system to modulate gastrointestinal motor function utilizing NPY1 receptor dependent mechanisms.

  20. 3rd ICTs and Society Meeting; Paper Session - Inequalities: social, economic and political; Paper 2: Media conver-gence and blogging in exposing corruption and fraud in India

    Directory of Open Access Journals (Sweden)

    C.S.H.N. Murthy

    2010-06-01

    Full Text Available The divide between the poor and the rich in India is getting wider and deeper day by day in the post globalization and privatization. It also sounds paradoxical to hear that the development whatever is happening in India is preceded by large scale corruption where the politicians and the bureaucrats in tandem and in perfect collusion are siphoning off billions of rupees meant for the rural development. But, none of these projects could escape the brunt of corruption in India. The paper deals with a few such stories of corruption as case studies that came to limelight and are placed in ‘convergent’ media either in the blogs of television channels or print media or on line web-portals such as face-book/twitter or on You Tube. The paper hypothesizes that the current level of exposure of corruption in 24x7 ‘convergent’ media is not adequate and would like to explore the ways and means of utilizing it (convergent media more ‘socially effectively’ to totally curb/eliminate the corruption from the top to the lower level in the governance in India. This study therefore follows multiple methods of inquiry, besides the case studies, including surfing the existing web-portals/blogs for the mobilized public views on exposure of corruption through the ‘convergent’ media and conducting  interviews with the convenience sample of media experts in the field as also analyzing the secondary documents (for case studies. The study is therefore a descriptive and qualitative communication research.

  1. A study to evaluate the changes in 3rd molar angulation with extraction of four premolars in class II malocclusion therapy

    Directory of Open Access Journals (Sweden)

    Özge Uslu-Akçam

    2015-01-01

    Full Text Available Aim: The objectives of the study are to evaluate the changes in third molar angulation during orthodontic treatment with extraction of premolars in Class II malocclusions, and to evaluate the relationship between the angulation of third molars and positional changes of incisors and molars. Materials and Methods: This study was conducted on lateral cephalograms and dental panoramic tomograms of 30 patients (mean age 13.48 years with skeletodental Class II malocclusion treated with four first premolar extractions. Twenty-four cases were treated with edgewise, and six were treated with Begg technique. The changes in the eruption pattern of the third molars were observed at the beginning of the treatment (T1 and at the end of the treatment (T2. The changes in the anteroposterior position of the incisors and molars, original molar space, and mesiodistal third molar angulation were tested by paired t-test. Results: The positional changes of the upper/lower incisors and first molars and original molar space were found similar in edgewise and Begg technique. Original molar space was increased in both jaws during orthodontic treatment. Long axis angle of the upper right third molar due to occlusal plane was increased nonsignificantly. Lower right third molars uprighted significantly. A positive correlation was found between the inclination of the lower right third molars and position of lower incisors and first molars. Conclusion: Treatment with extraction of premolars result in a greater space in the third molar region as a result of the mesial movement of the molars during space closure.

  2. Bunch by bunch beam monitoring in 3rd and 4th generation light sources by means of single crystal diamond detectors and quantum well devices

    Science.gov (United States)

    Antonelli, M.; Di Fraia, M.; Tallaire, A.; Achard, J.; Carrato, S.; Menk, R. H.; Cautero, G.; Giuressi, D.; Jark, W. H.; Biasiol, G.; Ganbold, T.; Oliver, K.; Callegari, C.; Coreno, M.; De Sio, A.; Pace, E.

    2012-10-01

    New generation Synchrotron Radiation (SR) sources and Free Electron Lasers (FEL) require novel concepts of beam diagnostics to keep photon beams under surveillance, asking for simultaneous position and intensity monitoring. To deal with high power load and short time pulses provided by these sources, novel materials and methods are needed for the next generation BPMs. Diamond is a promising material for the production of semitransparent in situ X-ray BPMs withstanding the high dose rates of SR rings and high energy FELs. We report on the development of freestanding, single crystal CVD diamond detectors. Performances in both low and radio frequency SR beam monitoring are presented. For the former, sensitivity deviation was found to be approximately 2%; a 0.05% relative precision in the intensity measurements and a 0.1-μm precision in the position encoding have been estimated. For the latter, single-shot characterizations revealed sub-nanosecond rise-times and spatial precisions below 6 μm, which allowed bunch-by-bunch monitoring in multi-bunch operation. Preliminary measurements at the Fermi FEL have been performed with this detector, extracting quantitative intensity and position information for FEL pulses (~ 100 fs, energy 12 ÷ 60 eV), with a long-term spatial precision of about 85 μm results on FEL radiation damages are also reported. Due to their direct, low-energy band gap, InGaAs quantum well devices too may be used as fast detectors for photons ranging from visible to X-ray. Results are reported which show the capability of a novel InGaAs/InAlAs device to detect intensity and position of 100-fs-wide laser pulses.

  3. Study on applicability of evaluation model of manpower needs for dismantling of equipments in FUGEN-2. Preparation and clean-up process in 3rd/4th feedwater heater room

    International Nuclear Information System (INIS)

    Shibahara, Yuji; Izumi, Masanori; Nanko, Takashi; Tachibana, Mitsuo

    2011-06-01

    Manpower needs for the preparation and clean-up process on the dismantling of equipments in FUGEN 3rd/4th feedwater heater room conducted in 2008 were calculated with the management data evaluation system: PRODIA Code, and it was inspected whether a conventional evaluation model had applicability for large nuclear facilities such as FUGEN or not. It was confirmed that the conventional evaluation model had no applicability for FUGEN causing by the difference in the plant scale between JPDR and FUGEN bringing expansion of working area. The difference between the actual data and the calculated value was improved by reviewing of the evaluation model, and this reviewing process also brought a new evaluation model. (author)

  4. Comprehensive risk reduction in patients with atrial fibrillation: emerging diagnostic and therapeutic options—a report from the 3rd Atrial Fibrillation Competence NETwork/European Heart Rhythm Association consensus conference

    Science.gov (United States)

    Kirchhof, Paulus; Lip, Gregory Y.H.; Van Gelder, Isabelle C.; Bax, Jeroen; Hylek, Elaine; Kaab, Stefan; Schotten, Ulrich; Wegscheider, Karl; Boriani, Giuseppe; Brandes, Axel; Ezekowitz, Michael; Diener, Hans; Haegeli, Laurent; Heidbuchel, Hein; Lane, Deirdre; Mont, Luis; Willems, Stephan; Dorian, Paul; Aunes-Jansson, Maria; Blomstrom-Lundqvist, Carina; Borentain, Maria; Breitenstein, Stefanie; Brueckmann, Martina; Cater, Nilo; Clemens, Andreas; Dobrev, Dobromir; Dubner, Sergio; Edvardsson, Nils G.; Friberg, Leif; Goette, Andreas; Gulizia, Michele; Hatala, Robert; Horwood, Jenny; Szumowski, Lukas; Kappenberger, Lukas; Kautzner, Josef; Leute, Angelika; Lobban, Trudie; Meyer, Ralf; Millerhagen, Jay; Morgan, John; Muenzel, Felix; Nabauer, Michael; Baertels, Christoph; Oeff, Michael; Paar, Dieter; Polifka, Juergen; Ravens, Ursula; Rosin, Ludger; Stegink, W.; Steinbeck, Gerhard; Vardas, Panos; Vincent, Alphons; Walter, Maureen; Breithardt, Günter; Camm, A. John

    2012-01-01

    While management of atrial fibrillation (AF) patients is improved by guideline-conform application of anticoagulant therapy, rate control, rhythm control, and therapy of accompanying heart disease, the morbidity and mortality associated with AF remain unacceptably high. This paper describes the proceedings of the 3rd Atrial Fibrillation NETwork (AFNET)/European Heart Rhythm Association (EHRA) consensus conference that convened over 60 scientists and representatives from industry to jointly discuss emerging therapeutic and diagnostic improvements to achieve better management of AF patients. The paper covers four chapters: (i) risk factors and risk markers for AF; (ii) pathophysiological classification of AF; (iii) relevance of monitored AF duration for AF-related outcomes; and (iv) perspectives and needs for implementing better antithrombotic therapy. Relevant published literature for each section is covered, and suggestions for the improvement of management in each area are put forward. Combined, the propositions formulate a perspective to implement comprehensive management in AF. PMID:21791573

  5. 3rd School on Attractor Mechanism

    CERN Document Server

    SAM 2007; The Attractor Mechanism: Proceedings of the INFN-Laboratori Nazionali di Frascati School 2007

    2010-01-01

    This book is based upon lectures presented in June 2007 at the INFN-Laboratori Nazionali di Frascati School on Attractor Mechanism, directed by Stefano Bellucci. The symposium included such prestigious lecturers as S. Ferrara, M. Gunaydin, P. Levay, and T. Mohaupt. All lectures were given at a pedagogical, introductory level, which is reflected in the specific "flavor" of this volume. The book also benefits from extensive discussions about, and related reworking of, the various contributions. In addition, this volume contains contributions originating from short presentations of rece

  6. 3rd Annual Workshop on Inverse Problem

    CERN Document Server

    2015-01-01

    This proceeding volume is based on papers presented on the Third Annual Workshop on Inverse Problems which was organized by the Department of Mathematical Sciences, Chalmers University of Technology and University of Gothenburg, and took place in May 2013 in Stockholm. The purpose of this workshop was to present new analytical developments and numerical techniques for solution of inverse problems for a wide range of applications in acoustics, electromagnetics, optical fibers, medical imaging, geophysics, etc. The contributions in this volume reflect these themes and will be beneficial to researchers who are working in the area of applied inverse problems.

  7. The 3rd DBCLS BioHackathon

    DEFF Research Database (Denmark)

    Katayama, Toshiaki; Wilkinson, Mark D; Micklem, Gos

    2013-01-01

    together representatives from public databases, analytical tool providers, and cyber-infrastructure researchers to jointly tackle important challenges in the area of in silico biological research. RESULTS: The theme of BioHackathon 2010 was the 'Semantic Web', and all attendees gathered with the shared...... goal of producing Semantic Web data from their respective resources, and/or consuming or interacting those data using their tools and interfaces. We discussed on topics including guidelines for designing semantic data and interoperability of resources. We consequently developed tools and clients...... for analysis and visualization. CONCLUSION: We provide a meeting report from BioHackathon 2010, in which we describe the discussions, decisions, and breakthroughs made as we moved towards compliance with Semantic Web technologies - from source provider, through middleware, to the end-consumer....

  8. Alaska Highway bibliography, 3rd edition

    DEFF Research Database (Denmark)

    Prange, Laurie

    Since the early 20th century various schemes were considered for the construction of roads, trails or railways 71 to link the Yukon, northern British Columbia and Alaska to the “outside.” These schemes were motivated by economic interests, including mining, lumber and tourism concerns. During...... the 1920s and 1930s a small but vocal group of “builders” began to campaign for a highway, either a coastal or inland route, to improve the northwest’s economic base. With the impending threat of war in the late 1930s, there was an increasing awareness by the American and Canadian governments...... increasing military needs. The unexpected bombing of Pearl Harbour in December 1941 stimulated interest in the construction of the Alaska Highway by the American government. The U.S. Army Corps of Engineers selected a route based on the location of the NWSR airfields and the military needs for an alternative...

  9. 3rd International Conference on Network Analysis

    CERN Document Server

    Kalyagin, Valery; Pardalos, Panos

    2014-01-01

    This volume compiles the major results of conference participants from the "Third International Conference in Network Analysis" held at the Higher School of Economics, Nizhny Novgorod in May 2013, with the aim to initiate further joint research among different groups. The contributions in this book cover a broad range of topics relevant to the theory and practice of network analysis, including the reliability of complex networks, software, theory, methodology, and applications.  Network analysis has become a major research topic over the last several years. The broad range of applications that can be described and analyzed by means of a network has brought together researchers, practitioners from numerous fields such as operations research, computer science, transportation, energy, biomedicine, computational neuroscience and social sciences. In addition, new approaches and computer environments such as parallel computing, grid computing, cloud computing, and quantum computing have helped to solve large scale...

  10. 3rd Conference on Microactuators and Micromechanisms

    CERN Document Server

    Ananthasuresh, Gondi; Corves, Burkhard; Petuya, Victor

    2015-01-01

    This book contains applications of micromechanisms and microactuators in several very modern technical fields such as mechatronics, biomechanics, machines, micromachines, robotics and apparatuses. In connection with its topic, the work combines the theoretical results with experimental tests on micromechanisms and microactuators. The book presents the most recent research advances in Machine and Mechanisms Science. It includes the accepted reviewed papers of researchers specialized in the topics of the conference: microactuators and micro-assembly, micro sensors involving movable solids, micro-opto-mechanical devices, mechanical tools for cell and tissue studies, micromanipulation and micro-stages, micro-scale flight and swimming, micro-robotics and surgical tools, micron-scale power generation, miniature manufacturing machines, micromechatronics and micro-mechanisms, biomechanics micro and nano scales and control issues in microsystems.  The presented applications of micromechanisms and microactuators i...

  11. 3rd International Conference of Serviceology

    CERN Document Server

    Spohrer, James; Kwan, Stephen; Takenaka, Takeshi

    2017-01-01

    Services are key activities in a globalized economy and they also underlie the quality of life of local residents. The advanced work presented in this book was selected from the proceedings of the Third International Conference on Serviceology (ICServ2015), held July 7–9, 2015, in San Jose, CA, USA. The conference was supported by the Society for Serviceology. The society was established in 2012 in Japan to explore the scientific systematization of services and to promote technological developments for solutions to industrial issues. This book provides a useful general guide to the state of the art in the theory and practice of services. It can also serve as a valuable reference book for researchers in a wide range of fields from engineering to marketing and economics.

  12. 3rd BRAZILIAN CONSENSUS ON Helicobacter pylori

    Directory of Open Access Journals (Sweden)

    Luiz Gonzaga Coelho

    2013-04-01

    Full Text Available Significant progress has been obtained since the Second Brazilian Consensus Conference on Helicobacter pylori Infection held in 2004, in São Paulo, SP, Brazil, and justify a third meeting to establish updated guidelines on the current management of H. pylori infection. The Third Brazilian Consensus Conference on H pylori Infection was organized by the Brazilian Nucleus for the Study of Helicobacter, a Department of the Brazilian Federation of Gastroenterology and took place on April 12-15, 2011, in Bento Gonçalves, RS, Brazil. Thirty-one delegates coming from the five Brazilian regions and one international guest, including gastroenterologists, pathologists, epidemiologists, and pediatricians undertook the meeting. The participants were allocated in one of the five main topics of the meeting: H pylori, functional dyspepsia and diagnosis; H pylori and gastric cancer; H pylori and other associated disorders; H pylori treatment and retreatment; and, epidemiology of H pylori infection in Brazil. The results of each subgroup were submitted to a final consensus voting to all participants. Relevant data were presented, and the quality of evidence, strength of recommendation, and level of consensus were graded. Seventy per cent and more votes were considered as acceptance for the final statement. This article presents the main recommendations and conclusions to guide Brazilian doctors involved in the management of H pylori infection.

  13. BOOK REVIEW: Modern Physics, 3rd edn

    Science.gov (United States)

    Lovett, David

    1999-09-01

    The number of broadly based physics texts written at a level corresponding to second year and above of UK physics degrees is limited. This is such a book thoroughly updated in a third edition, the first edition having been published 20 years ago. The book is unusual in that the reader is referred to the Freeman website www.whfreeman.com/physics for some additional sections. It will be interesting to see whether this proves to be an attractive feature. The coverage reflects the US emphasis on topics and contains both theoretical and experimental details. It should not be regarded as an introductory text although it is clearly written. Thus the first two chapters take the reader straight into relativity, concentrating mainly on special relativity but going on to general relativity. From here the reader is led to ideas of quantization of charge, light and energy, followed by an exploration of the nuclear atom, wavelike properties of particles and Schrödinger's equation. Solution of this equation for the hydrogen atom introduces a section on spectroscopy. The next chapter on statistical physics includes Fermi-Dirac and Bose-Einstein statistics and brings to a close Part 1, which concentrates on the theoretical groundwork. Consistent with its title, the book does not cover traditional aspects of thermodynamics and electromagnetic theory. Part 2 is entitled `Applications' and begins with a chapter on molecular structure and spectra. Lasers and masers are included here but geometrical, physical and nonlinear optics get limited or no coverage. Solid state physics follows but, despite the title of the book, there is little on modern devices, although the section on superconductivity mentions high temperature materials. The chapters on nuclear physics, fission, fusion reactors and medical applications and a chapter on particle physics are comprehensive. Finally a chapter on astrophysics and cosmology is referred to, but the reader must find this at the website. As this is an attractive chapter it is a pity that it is not printed within the book. Although viewing the chapter on the Web gives the benefit of full colour, it is not easy to read the textual information off the screen. Within the printed material, there are good diagrams with the addition of a single colour, burgundy, a colour that is wasted on those of us who are red-green colour-blind! Each chapter is provided with an impressive number of graded problems (it is not easy to provide such a comprehensive range of problems at this level) and numerical answers are given in the back for every third problem. There is a student solution manual available for these problems and a complete instructor's solution manual has also been produced. It is therefore a useful book for both students and lecturers.

  14. Nuclear and radiochemistry, 3rd edition

    International Nuclear Information System (INIS)

    Friedlander, G.; Kennedy, J.W.; Macias, E.S.; Miller, J.M.

    1981-01-01

    A broad coverage of radioactivity and nuclear phenomena fundamentals is presented, followed by discussions of applications in such fields as basic chemistry, biology, medicine, earth and space sciences. Following an introductory historical chapter, the basic fundamentals of nuclear properties, radioactive growth and decay, and nuclear reactions are covered in the first five chapters. Chapters 6-10 deal mainly with topics essential to the practicing radiochemist. They include discussion of interactions of radiation with matter, radiation detection and measurement, techniques in nuclear chemistry, statistics and radioactivity and nuclear models. Applications of these disciplines in the various fields noted above together with chapters on nuclear energy and sources of nuclear bombarding particles complete the 15 chapters of the book

  15. ELECTIONS PENSION FUND 3rd candidate

    CERN Multimedia

    2001-01-01

    ORGANISATION EUROPEENNE POUR LA RECHERCHE NUCLEAIRE CERN EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CAISSE DE PENSIONS / PENSION FUND Caisse de Pensions - ELECTIONS - Pension Fund This candidature has been duly registered and is hereby presented in accordance with paragraph 6.h of the Regulations for Elections to the Governing Board of the Pension Fund. Candidate : Name : Hauviller First Name : Claude Dear colleague of CERN and ESO, For the first time, I am standing and requesting your support to become a member of the Governing Board of our Pension Fund. CERN staff member since 1974, I have already carried elective mandates: I have been Delegate to the Staff Council and Member of the Senior Staff Consultative Committee (the Nine). For the majority of us, our Pension Fund is our only social provident scheme and source of retirement income; I believe I can usefully contribute to its successful management and help ensure its balance. Our Fund reaches its majority: soon, there will be more beneficiaries tha...

  16. 3rd Annual Disruptive Technology Conference

    Science.gov (United States)

    2006-09-07

    Panel -- The Warfighter’s Perspective The Impact of Disruptive Technologies on Joint Warfighting MG Michael Vane, USA, Vice Director for Force...Structure, Resources & Assessment, Joint Staff, J-8 Panel -- Perspectives of Change: Identifying the Emerging Commercial Disruptive Technologies Decision...Mark Lucas, Board Member OSGeo, RadiantBlue Technologies Panel -- The Search for Disruptive Technologies - a “Blue Force” Multiplier Advanced

  17. Placental perfusion in 3rd trimester pregnancy

    Science.gov (United States)

    Sitepu, M.; Syahriza, A.; Sibuea, D.; Hanafiah, T. M.

    2018-03-01

    The placenta is an organ for transmitting nutrition and oxygen to thefetus; it means if there is a defect in the placenta could make growth restriction to the fetus, even death. Uterine artery flow escalated since the halfway point of the pregnancy or the complete trophoblast invasion of spiralis artery, and keep going in every week. 3D power Doppler examination on placenta could show the uterineplacenta circulation and fetoplacental at once so could give themore accurate result. A cross-sectional study in RSUP HAM and theprivate specialist clinic was conducted in 100 pregnant samples with 28-40 week gestational age, exact last menstrual period date, and no underlying disease to examine the alteration of placental perfusion by gestationalage and placental location. There was a correlation between VI and VFI in placenta toward umbilical artery flow, but no correlation in FI. The placental location also plays a role in interval blood flow, especially FI and VFI, it means the VFI hold the strongest correlation in both ways.

  18. Ethnographical Research in 3rd World Countries

    DEFF Research Database (Denmark)

    Madsen, Ulla Ambrosius

    2002-01-01

    is that their ethnographic practice generates knowledge about paradoxes, complexities and dilemmas in their own cultural and social context that is often ignored in (Western-driven) educational policy, research and innovation. Thus ethnographic research is functioning also as a tool in educational change and innovation.......This paper focuses on Etnografphic Research as a means for generating knowledge about the issues related to education - school learning and bringing up. The example is taken from a research project carried out in Nepal by students recruited from the Ministery of Education. The point...

  19. 3rd International Conference on Numerical Combustion

    CERN Document Server

    Larrouturou, Bernard; Numerical Combustion

    1989-01-01

    Interest in numerical combustion is growing among applied mathematicians, physicists, chemists, engine manufacturers and many industrialists. This proceedings volume contains nine invited lectures and twenty seven contributions carefully selected by the editors. The major themes are numerical simulation of transsonic and supersonic combustion phenomena, the study of supersonic reacting mixing layers, and turbulent combustion. Emphasis is laid on hyperbolic models and on numerical simulations of hydrocarbon planes with a complete set of chemical reactions carried out in two-dimensional geometries as well as on complex reactive flow simulations.

  20. 3rd international swarm seminar. Proceedings

    International Nuclear Information System (INIS)

    Lindinger, W.; Villinger, H.; Federer, W.

    1983-01-01

    47 papers on various problems of ion physics have been presented. The session headings are 1) recombination and electron attachment 2) transport of electrons in gases and liquids 3) swarm studies on collisions of metastable and on collisions of Rydberg atoms 4) ion neutral-interactions 5) ion transport in gases 6) applied aspects of swarm studies. (G.Q.)

  1. 3rd International symposium on ambient intelligence

    CERN Document Server

    Tapia, Dante I; Novais, Paulo; ISAmI 2012; Ambient Intelligence : Software and Applications

    2012-01-01

    Ambient Intelligence (AmI) is a recent paradigm emerging from Artificial Intelligence (AI), where computers are used as proactive tools assisting people with their day-to-day activities, making everyone’s life more comfortable. Another main concern of AmI originates from the human computer interaction domain and focuses on offering ways to interact with systems in a more natural way by means user friendly interfaces. This field is evolving quickly as can be witnessed by the emerging natural language and gesture based types of interaction. The inclusion of computational power and communication technologies in everyday objects is growing and their embedding into our environments should be as invisible as possible. In order for AmI to be successful, human interaction with computing power and embedded systems in the surroundings should be smooth and happen without people actually noticing it. The only awareness people should have arises from AmI: more safety, comfort and wellbeing, emerging in a natural and inh...

  2. 3rd Developers@CERN Forum

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    It's about U and I !   The Developers@CERN Forum is an event by developers, for developers, aimed at promoting knowledge and experience sharing. This edition will take place at the IT Amphitheatre, on the 13th, 14th and 15th of February afternoons. It will consist of a series of short presentations and workshops. The topic for this conference will be Frontend & User interfaces. Have you got an idea for a presentation or workshop? Then, tell us about it (deadline on 27th of January). Registration will open in November. Please subscribe to developers-forum-announce@cern.ch mailing list for further information. This event will be made by developers for developers. We are counting on your presence, but also on your contributions! To learn more about the initiative, read the CERN Bulletin article. Organization You can get in touch us at developers-forum-organizers@cern.ch.

  3. 3rd Turbulence and Interactions Conference

    CERN Document Server

    Estivalezes, Jean-Luc; Gleize, Vincent; Lê, Thien-Hiep; Terracol, Marc; Vincent, Stéphane

    2014-01-01

    The book presents a snapshot of the state-of-art in the field of turbulence modeling and covers the latest developments concerning direct numerical simulations, large eddy simulations, compressible turbulence, coherent structures, two-phase flow simulation, and other related topics. It provides readers with a comprehensive review of both theory and applications, describing in detail the authors’ own experimental results. The book is based on the proceedings of the third Turbulence and Interactions Conference (TI 2012), which was held on June 11-14 in La Saline-les-Bains, La Réunion, France, and includes both keynote lectures and outstanding contributed papers presented at the conference. This multifaceted collection, which reflects the conference´s emphasis on the interplay of theory, experiments and computing in the process of understanding and predicting the physics of complex flows and solving related engineering problems, offers a practice-oriented guide for students, researchers and professionals in ...

  4. 3rd European Forum on Music 2013

    NARCIS (Netherlands)

    Dons, Karolien

    2013-01-01

    Music makes a difference?! The values of music.

    Music and culture play a significant role in the political and societal development of a peaceful and integrative Europe. Music and its diverse expressions are extremely relevant for social cohesion, wellbeing and economic growth. What kind of

  5. Evaluation of extraction methods for hexavalent chromium determination in dusts, ashes, and soils

    Science.gov (United States)

    Wolf, Ruth E.; Wilson, Stephen A.

    2010-01-01

    One of the difficulties in performing speciation analyses on solid samples is finding a suitable extraction method. Traditional methods for extraction of hexavalent chromium, Cr(VI), in soils, such as SW846 Method 3060A, can be tedious and are not always compatible with some determination methods. For example, the phosphate and high levels of carbonate and magnesium present in the U.S. Environmental Protection Agency (USEPA) Method 3060A digestion for Cr(VI) were found to be incompatible with the High Performance Liquid Chromatography-Inductively Coupled Plasma-Mass Spectrometry (HPLC-ICP-MS) detection method used by our laboratory. Modification of Method 3060A by eliminating the use of the phosphate buffer provided improved performance with the detection method, however dilutions are still necessary to achieve good chromatographic separation and detection of Cr(VI). An ultrasonic extraction method using a 1 mM Na2CO3 - 9 mM NaHCO3 buffer solution, adapted from Occupational Safety and Health Administration (OSHA) Method ID215, has been used with good results for the determination of Cr(VI) in air filters. The average recovery obtained for BCR-545 - Welding Dust Loaded on Filter (IRMM, Belgium) using this method was 99 percent (1.2 percent relative standard deviation) with no conversion of Cr(VI) to Cr(III) during the extraction process. This ultrasonic method has the potential for use with other sample matrices, such as ashes and soils. Preliminary investigations using NIST 2701 (Hexavalent Chromium in Contaminated Soil) loaded onto quartz filters showed promising results with approximately 90 percent recovery of the certified Cr(VI) value. Additional testing has been done using NIST 2701 and NIST 2700 using different presentation methods. Extraction efficiency of bulk presentation, where small portions of the sample are added to the bottom of the extraction vessel, will be compared with supported presentation, where small portions of the sample are loaded onto a

  6. An in vitro biomechanical comparison of hydroxyapatite coated and uncoated ao cortical bone screws for a limited contact: dynamic compression plate fixation of osteotomized equine 3rd metacarpal bones.

    Science.gov (United States)

    Durham, Myra E; Sod, Gary A; Riggs, Laura M; Mitchell, Colin F

    2015-02-01

    To compare the monotonic biomechanical properties of a broad 4.5 mm limited contact-dynamic compression plate (LC-DCP) fixation secured with hydroxyapatite (HA) coated cortical bone screws (HA-LC-DCP) versus uncoated cortical bone screws (AO-LC-DCP) to repair osteotomized equine 3rd metacarpal (MC3) bones. Experimental. Adult equine cadaveric MC3 bones (n = 12 pair). Twelve pairs of equine MC3 were divided into 3 test groups (4 pairs each) for: (1) 4 point bending single cycle to failure testing; (2) 4 point bending cyclic fatigue testing; and (3) torsional single cycle to failure testing. For the HA-LC-DCP-MC3 construct, an 8-hole broad LC-DCP (Synthes Ltd, Paoli, PA) was secured on the dorsal surface of each randomly selected MC3 bone with a combination of four 5.5 mm and four 4.5 mm HA-coated cortical screws. For the AO-LC-DCP-MC3 construct, an 8-hole 4.5 mm broad LC-DCP was secured on the dorsal surface of the contralateral MC3 bone with a combination of four 5.5 mm and four 4.5 mm uncoated cortical screws. All MC3 bones had mid-diaphyseal osteotomies. Mean test variable values for each method were compared using a paired t-test within each group. Significance was set at P < .05. Mean yield load, yield bending moment, composite rigidity, failure load, and failure bending moment, under 4 point bending, single cycle to failure, of the HA-LC-DCP fixation were significantly greater than those of the AO-LC-DCP fixation. Mean ± SD values for the HA-LC-DCP and the AO-LC-DCP fixation techniques, respectively, in single cycle to failure under 4 point bending were: yield load, 26.7 ± 2.15 and 16.3 ± 1.38 kN; yield bending moment, 527.4 ± 42.4 and 322.9 ± 27.2 N-m; composite rigidity, 5306 ± 399 and 3003 ± 300 N-m/rad; failure load, 40.6 ± 3.94 and 26.5 ± 2.52 kN; and failure bending moment, 801.9 ± 77.9 and 522.9 ± 52.2 N-m. Mean cycles to failure in 4 point bending of the HA

  7. Diagnosis of pulmonary artery embolism. Comparison of single-source CT and 3rd generation dual-source CT using a dual-energy protocol regarding image quality and radiation dose

    International Nuclear Information System (INIS)

    Petritsch, Bernhard; Kosmala, Aleksander; Gassenmeier, Tobias; Weng, Andreas Max; Veldhoen, Simon; Kunz, Andreas Steven; Bley, Thorsten Alexander

    2017-01-01

    To compare radiation dose, subjective and objective image quality of 3 rd generation dual-source CT (DSCT) and dual-energy CT (DECT) with conventional 64-slice single-source CT (SSCT) for pulmonary CTA. 180 pulmonary CTA studies were performed in three patient cohorts of 60 patients each. Group 1: conventional SSCT 120 kV (ref.); group 2: single-energy DSCT 100 kV (ref.); group 3: DECT 90/Sn150 kV. CTDIvol, DLP, effective radiation dose were reported, and CT attenuation (HU) was measured on three central and peripheral levels. The signal-to-noise-ratio (SNR) and contrast-to-noise-ratio (CNR) were calculated. Two readers assessed subjective image quality according to a five-point scale. Mean CTDIvol and DLP were significantly lower in the dual-energy group compared to the SSCT group (p < 0.001 [CTDIvol]; p < 0.001 [DLP]) and the DSCT group (p = 0.003 [CTDIvol]; p = 0.003 [DLP]), respectively. The effective dose in the DECT group was 2.79 ± 0.95 mSv and significantly smaller than in the SSCT group (4.60 ± 1.68 mSv, p < 0.001) and the DSCT group (4.24 ± 2.69 mSv, p = 0.003). The SNR and CNR were significantly higher in the DSCT group (p < 0.001). Subjective image quality did not differ significantly among the three protocols and was rated good to excellent in 75 % (135/180) of cases with an inter-observer agreement of 80 %. Dual-energy pulmonary CTA protocols of 3 rd generation dual-source scanners allow for significant reduction of radiation dose while providing excellent image quality and potential additional information by means of perfusion maps. Dual-energy CT with 90/Sn150 kV configuration allows for significant dose reduction in pulmonary CTA. Subjective image quality was similar among the three evaluated CT-protocols (64-slice SSCT, single-energy DSCT, 90/Sn150 kV DECT) and was rated good to excellent in 75% of cases. Dual-energy CT provides potential additional information by means of iodine distribution maps.

  8. Relação da memória visual com o desempenho ortográfico de crianças de 2ª e 3ª séries do ensino fundamental Relation between the visual memory and the ortographic performance in the children attending the 2nd and 3rd years at the elementary school

    Directory of Open Access Journals (Sweden)

    Patricia Manfrin Fontes Barbosa

    2010-08-01

    Full Text Available OBJETIVO: neste estudo procurou-se relacionar a memória visual ao desempenho ortográfico da escrita de crianças da 2ª e 3ª séries do ensino fundamental. MÉTODOS: foram analisadas 61 crianças de ambos os sexos, com idades variando entre 8 e 9 anos de idade. Avaliadas em sala de aula, pelas examinadoras, no 2º semestre do ano letivo de 2006, utilizando-se de três etapas distintas: Avaliação do ditado oral de palavras isoladas, Avaliação da leitura silenciosa de palavras isoladas e Análise da memória visual por meio da Figura Complexa de Rey. RESULTADOS: verificou-se que os erros ortográficos diminuem no ditado visual, quando comparado ao ditado oral; crianças que cometem mais erros ortográficos nos ditados têm pior desempenho na Figura Complexa de Rey; crianças de 3ª série possuem menor frequência de erros ortográficos e melhor desempenho em Figura Complexa de Rey, quando comparadas às crianças de 2ª série. CONCLUSÃO: a memória visual é fator importante no desenvolvimento ortográfico, levando a criança a compreender melhor a aquisição de regras ortográficas.PURPOSE: in this relate the visual memory to orthographic performance of children's handwriting from 2nd and 3rd years of elementary school. METHODS: it was analyzed 61 children, male and female, with average age between 8 and 9 years old, were analyzed. The children were evaluated in classroom, by the examiner, during the 2nd semester of the school year, in 3 different stages: oral dictation valuation of isolated words, of silent reading valuation of isolated words and visual memory analysis through the Rey Complex Figure. RESULTS: it was noticed that orthographic mistakes reduces during visual dictation, when compared to oral dictation; children who make more orthographic mistakes during dictation, have worse performance on the Rey Complex Figure; children from 3rd year have less frequency of orthographic mistakes and better performance on the Rey Complex

  9. Assessing change in diet and biological affinity between the 4th and 3rd millennia cal BCE in the Portuguese Estremadura: a preliminary dental comparison of Feteira II and Bolores.

    Science.gov (United States)

    Horwath, B C; Waterman, A J; Lillios, K T; Irish, J D

    2014-04-01

    Although the social and political changes accompanying the transition from the Neolithic through Copper Age, between the 4th and 3rd millennia cal BCE, in southwestern Iberia are reasonably well understood, much less is known about whether population movements and dietary changes accompanied these transformations. To address this question, human dental remains from the Middle through Late Neolithic site of Feteira II (3600-2900 cal BCE) and the Late Neolithic site of Bolores (2800-2600 cal BCE) in the Portuguese Estremadura were used to examine diet (microwear) and affinity (dental non-metrics). Microwear features were not found to be significantly different between Feteira II and Bolores, suggesting that the emergence of social complexity during this period did not result in large-scale changes in subsistence practices during the period of use at these sites. Using the Arizona State University Dental Anthropology System and supporting statistics, no significant difference between the samples from Feteira II and Bolores was observed, suggesting that no population replacement occurred between the Middle Neolithic and Late Neolithic/Copper Age. However, at Bolores there is some indication that there may have been demographic exchanges between southern Iberian and North African populations during the Late Neolithic/Copper Age. Copyright © 2013 Elsevier GmbH. All rights reserved.

  10. Report of 6th research meeting on basic process of fuel cycle for nuclear fusion reactors, Yayoi Research Group; 3rd expert committee on research of nuclear fusion fuel material correlation basis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In this report, the lecture materials of Yayoi Research Group, 6th research meeting on basic process of fuel cycle for nuclear fusion reactors which was held at the University of Tokyo on March 25, 1996, are collected. This workshop was held also as 3rd expert committee on research of nuclear fusion fuel material correlation basis of Atomic Energy Society of Japan. This workshop has the character of the preparatory meeting for the session on `Interface effect in nuclear fusion energy system` of the international workshop `Interface effect in quantum energy system`, and 6 lectures and one comment were given. The topics were deuterium transport in Mo under deuterium ion implantation, the change of the stratum structure of graphite by hydrogen ion irradiation, the tritium behavior in opposing materials, the basic studies of the irradiation effects of solid breeding materials, the research on the behavior of hydroxyl group on the surface of solid breeding materials, the sweep gas effect on the surface of solid breeding materials, and the dynamic behavior of ion-implanted deuterium in proton-conductive oxides. (K.I.)

  11. Educational Activity for the Radiation Emergency System in the Northern Part of Japan: Meeting Report on "The 3rd Educational Symposium on Radiation and Health (ESRAH) by Young Scientists in 2016".

    Science.gov (United States)

    Matsuya, Yusuke; Tsujiguchi, Takakiyo; Yamaguchi, Masaru; Kimura, Takaaki; Mori, Ryosuke; Yamada, Ryota; Saga, Ryo; Fujishima, Yohei; Date, Hiroyuki

    2017-06-01

    In the northern part of Japan, close cooperation is essential in preparing for any possible emergency response to radiation accidents because several facilities, such as the Low-Level Radioactive Waste Disposal Facility, the MOX Fuel Fabrication Plant and the Vitrified Waste Storage Center, exist in Rokkasho Village (Aomori Prefecture). After the accident at Fukushima Daiichi Nuclear Power Plant in 2011, special attention should be given to the relationship between radiation and human health, as well as establishing a system for managing with a radiation emergency. In the area of Hokkaido and Aomori prefectures in Japan, since 2008 an exchange meeting between Hokkaido University and Hirosaki University has been held every year to have opportunities to discuss radiation effects on human health and to collect the latest news on monitoring environmental radiation. This meeting was elevated to an international meeting in 2014 titled "Educational Symposium on Radiation and Health (ESRAH) by Young Scientists". The 3rd ESRAH meeting took place in 2016, with the theme "Investigating Radiation Impact on the Environmental and Health". Here we report the meeting findings on the continuing educational efforts after the Fukushima incident, what was accomplished in terms of building a community educational approaches, and future goals.

  12. Short-term diagnostic stability of probable headache disorders based on the International Classification of Headache Disorders, 3rd edition beta version, in first-visit patients: a multicenter follow-up study.

    Science.gov (United States)

    Kim, Byung-Su; Moon, Heui-Soo; Sohn, Jong-Hee; Cha, Myong-Jin; Song, Tae-Jin; Kim, Jae-Moon; Park, Jeong Wook; Park, Kwang-Yeol; Cho, Soo-Jin; Kim, Soo-Kyoung

    2016-01-01

    A "Probable headache disorder" is diagnosed when a patient's headache fulfills all but one criterion of a headache disorder in the 3rd beta edition of the International Classification of Headache Disorder (ICHD-3β). We investigated diagnostic changes in probable headache disorders in first-visit patients after at least 3 months of follow-up. This was a longitudinal study using a prospective headache registry from nine headache clinics of referral hospitals. The diagnostic change of probable headache disorders at baseline was assessed at least 3 months after the initial visit using ICHD-3β. Of 216 patients with probable headache disorders at baseline, the initial probable diagnosis remained unchanged for 162 (75.0 %) patients, while it progressed to a definite diagnosis within the same headache subtype for 45 (20.8 %) by fulfilling the criteria during a median follow-up period of 6.5 months. Significant difference on the proportions of constant diagnosis was not found between headache subtypes (P headache (TTH), and 76.0 % for probable other primary headache disorders (OPHD). Among patients with headache recurrence, the proportion of constant diagnosis was higher for probable migraine than for probable TTH plus probable OPHD (59.2 vs. 23.1 %; P 3 and ≤ 6 months vs. > 6 and ≤ 10 months) in probable migraine, probable TTH, and probable OPHD, respectively. In this study, a probable headache diagnosis, based on ICHD-3β, remained in approximately three-quarters of the outpatients; however, diagnostic stability could differ by headache recurrence and subtype. Probable headache management might have to consider these differences.

  13. PREFACE: Selected contributions from the 3rd Theory Meets Industry International Workshop, TMI2009 (Nagoya, Japan, 11-13 November 2009) Selected contributions from the 3rd Theory Meets Industry International Workshop, TMI2009 (Nagoya, Japan, 11-13 November 2009)

    Science.gov (United States)

    Tanaka, Isao; Hafner, Jürgen; Wimmer, Erich; Asahi, Ryoji

    2010-09-01

    . Lectures and poster presentations were thus solicited from leading international academic and industrial researchers. The large audience that attended responded to the high quality of the talks with pertinent questions and lively discussions. The third workshop, TMI2009, was held over three days from 11-13 November, 2009, at the Nagoya International Center, Nagoya, Japan. Invited talks were given by 23 speakers from 9 countries from both the academic and industry sectors. The speakers were Ryoji Asahi (Toyota Central R&D Labs, Japan), Tomas Bucko (University of Vienna, Austria), Gábor Csányi (University of Cambridge, UK), Alessandro De Vita (King's College London, UK), Bernard Delley (Paul Scherrer Institute, Switzerland), Christophe Domain (EDF, France), George Fitzgerald (Accelrys, USA), Takeo Fujiwara (University of Tokyo, Japan), Jürgen Hafner (University of Vienna, Austria), Masaya Ishida (Sumitomo Chemicals, Japan), Werner Janse Van Rensburg (Sasol Technology, South Africa), Masanori Kohyama (AIST, Japan), Takao Kotani (Tottori University, Japan), Georg Kresse (University of Vienna, Austria), Katsuyuki Matsunaga (Kyoto University, Japan), Stefan Müller (University of Erlangen-Nuremberg, Germany), Shin-ichiro Nakamura (Mitsubishi Chemicals, Japan), Fumiyasu Oba (Kyoto University, Japan), Tamio Oguchi (Hiroshima University, Japan), Pascal Raybaud (IFP, France), Isao Tanaka (Kyoto University/JFCC, Japan), Göran Wahnström (Chalmers University of Technology, Sweden), and Erich Wimmer (Materials Design Inc., USA). There were 40 poster presentations in total. The workshop was attended by approximately 120 participants with approximately 50 per cent from industry. The invited talks covered advances in ab initio solid-state calculations and their practical use in industry. Presentations outlining the progress made in treating large and complex systems, as well as more accurate and efficient calculation methods, were given from the theory side. Examples of the use of ab

  14. Abstracts from the 3rd International Genomic Medicine Conference (3rd IGMC 2015)

    OpenAIRE

    Shay, Jerry W.; Homma, Noriko; Zhou, Ruyun; Naseer, Muhammad Imran; Chaudhary, Adeel G.; Al-Qahtani, Mohammed; Hirokawa, Nobutaka; Goudarzi, Maryam; Fornace, Albert J.; Baeesa, Saleh; Hussain, Deema; Bangash, Mohammed; Alghamdi, Fahad; Schulten, Hans-Juergen; Carracedo, Angel

    2016-01-01

    Table of contents O1 Regulation of genes by telomere length over long distances Jerry W. Shay O2 The microtubule destabilizer KIF2A regulates the postnatal establishment of neuronal circuits in addition to prenatal cell survival, cell migration, and axon elongation, and its loss leading to malformation of cortical development and severe epilepsy Noriko Homma, Ruyun Zhou, Muhammad Imran Naseer, Adeel G. Chaudhary, Mohammed Al-Qahtani, Nobutaka Hirokawa O3 Integration of metagenomics and metabo...

  15. 3rd December 2010 - President Swiss Federal Institute of Technology Zürich (ETHZ)President R. Eichler signing the Guest Book with CERN Head of International Relations and ETHZ F. Pauss and visiting CMS service cavern at LHC Point 5.

    CERN Multimedia

    Maximilien Brice

    2010-01-01

    3rd December 2010 - President Swiss Federal Institute of Technology Zürich (ETHZ)President R. Eichler signing the Guest Book with CERN Head of International Relations and ETHZ F. Pauss and visiting CMS service cavern at LHC Point 5.

  16. Ultra-high pitch chest computed tomography at 70 kVp tube voltage in an anthropomorphic pediatric phantom and non-sedated pediatric patients: Initial experience with 3rd generation dual-source CT.

    Science.gov (United States)

    Hagelstein, Claudia; Henzler, Thomas; Haubenreisser, Holger; Meyer, Mathias; Sudarski, Sonja; Schoenberg, Stefan O; Neff, K Wolfgang; Weis, Meike

    2016-12-01

    Minimizing radiation dose while at the same time preserving image quality is of particular importance in pediatric chest CT. Very recently, CT imaging with a tube voltage of 70 kVp has become clinically available. However, image noise is inversely proportional to the tube voltage. We aimed to investigate radiation dose and image quality of pediatric chest CT performed at 70 kVp in an anthropomorphic pediatric phantom as well as in clinical patients. An anthropomorphic pediatric phantom, which resembles a one-year-old child in physiognomy, was scanned on the 3 rd generation dual-source CT (DSCT) system at 70 kVp and 80 kVp and a fixed ultra low tube-current of 8 mAs to solely evaluate the impact of lowering tube voltage. After the phantom measurements, 18 pediatric patients (mean 29.5 months; range 1-91 months; 21 examinations) underwent 3.2 high-pitch chest CT on the same DSCT system at 70 kVp tube voltage without any sedation. Radiation dose and presence of motion artifacts was compared to a retrospectively identified patient cohort examined at 80 kVp on a 16-slice single-source-CT (SSCT; n=15; 14/15 with sedation; mean 30.7 months; range 0-96 months; pitch=1.5) or on a 2 nd generation DSCT without any sedation (n=6; mean 32.8 months; range 4-61 months; pitch=3.2). Radiation dose in the phantom scans was reduced by approximately 40% when using a tube voltage of 70 kVp instead of 80 kVp. In the pediatric patient group examined at 70 kVp age-specific effective dose (ED; mean 0.5±0.2 mSv) was significantly lower when compared to the retrospective cohort scanned at 80 kVp on the 16-slice-SSCT (mean ED: 1.0±0.3 mSv; pCT examinations showed any motion artifacts whereas 13/15 examinations of the retrospective patient cohort scanned at 80 kVp with a pitch of 1.5 showed motion artifacts. 3.2 high-pitch chest CT performed with 70 kVp significantly reduces radiation dose when compared to 80 kVp while at the same time provides good image quality without any motion artifacts

  17. New archaeomagnetic data recovered from the study of celtiberic remains from central Spain (Numantia and Ciadueña, 3rd-1st centuries BC). Implications on the fidelity of the Iberian paleointensity database

    Science.gov (United States)

    Osete, M. L.; Chauvin, A.; Catanzariti, G.; Jimeno, A.; Campuzano, S. A.; Benito-Batanero, J. P.; Tabernero-Galán, C.; Roperch, P.

    2016-11-01

    Variations of geomagnetic field in the Iberian Peninsula prior to roman times are poorly constrained. Here we report new archaeomagnetic results from four ceramic collections and two combustion structures recovered in two pre-roman (celtiberic) archaeological sites in central Spain. The studied materials have been dated by archaeological evidences and supported by five radiocarbon dates. Rock magnetic experiments indicate that the characteristic remanent manetization (ChRM) is carried by a low coercivity magnetic phase with Curie temperatures of 530-575 °C, most likely Ti-poor titanomagnetite/titanomaghemite. Archaeointensity determinations were carried out by using the classical Thellier-Thellier protocol including tests and corrections for magnetic anisotropy and cooling rate dependency. Two magnetic behaviours were depicted during the laboratory treatment. Black potsherds and poor heated samples from the kilns, presented two magnetization components, alterations or curved Arai plots and were therefore rejected. In contrast, well heated specimens (red ceramic fragments and well heated samples from the kilns) show one single well defined component of magnetization going through the origin and linear Arai plots providing successful archaeointensity determinations. The effect of anisotropy of the thermoremanent magnetization (ATRM) on paleointensity analysis was systematically investigated obtaining very high ATRM corrections on fine pottery specimens. In some cases, differences between the uncorrected and ATRM corrected paleointensity values reached up to 86 %. The mean intensity values obtained from three selected set of samples were 64.3 ± 5.8 μT; 56.8 ± 3.8 and 56.7 ± 4.6 μT (NUS2, CI2 and CIA, respectively), which contribute to better understand the evolution of the palaeofield intensity in central Iberia during the 3rd-1st centuries BC. The direction of the field at first century BC has also been determined from oriented samples from CIA kilns (D = 357

  18. Cooperative Learning as a Democratic Learning Method

    Science.gov (United States)

    Erbil, Deniz Gökçe; Kocabas, Ayfer

    2018-01-01

    In this study, the effects of applying the cooperative learning method on the students' attitude toward democracy in an elementary 3rd-grade life studies course was examined. Over the course of 8 weeks, the cooperative learning method was applied with an experimental group, and traditional methods of teaching life studies in 2009, which was still…

  19. Remote ignitability analysis of high-level radioactive waste

    International Nuclear Information System (INIS)

    Lundholm, C.W.; Morgan, J.M.; Shurtliff, R.M.; Trejo, L.E.

    1992-09-01

    The Idaho Chemical Processing Plant (ICPP), was used to reprocess nuclear fuel from government owned reactors to recover the unused uranium-235. These processes generated highly radioactive liquid wastes which are stored in large underground tanks prior to being calcined into a granular solid. The Resource Conservation and Recovery Act (RCRA) and state/federal clean air statutes require waste characterization of these high level radioactive wastes for regulatory permitting and waste treatment purposes. The determination of the characteristic of ignitability is part of the required analyses prior to calcination and waste treatment. To perform this analysis in a radiologically safe manner, a remoted instrument was needed. The remote ignitability Method and Instrument will meet the 60 deg. C. requirement as prescribed for the ignitability in method 1020 of SW-846. The method for remote use will be equivalent to method 1020 of SW-846

  20. Ultimate strength analysis of thin plated structures using eigen-functions. 3rd Report. Application to reliability analysis; Koyu kansu wo mochiita usuita kozobutsu no dansosei kaisekiho. 3. Shinraisei kaiseki eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Ueda, Y. [Osaka University, Osaka (Japan). Welding Research Institute; Masaoka, K.; Okada, H. [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering

    1996-12-31

    A reliability analysis was performed on ultimate strength of a hull by introducing reliability engineerings into the idealized structural unit method. Elements developed under the present study were applied to a model of an actual structure to indicate that even an analysis requiring much time under the finite element method can be performed in a short time and at high accuracy when this method is used. Analysis acted with bending moment and shear force simultaneously was performed on a model used as a structure in experiments carried out by Nishihara, assuming pure bending moment and longitudinal strength during slamming. Then, a reliability analysis was conducted on the same model based on this analysis method to investigate the ultimate strength. In an analysis of an ultimate strength when bending and shearing that assume slamming act upon simultaneously, axial force in the hull side decreases as loading increases, wherein how the shearing force increases can be identified clearly. Although existence of initial bends reduces the strength, the effect of variance in the vicinity of the average value on the reliability is rather small, while the effect due to variance in yield stress is greater. 27 refs., 14 figs., 4 tabs.

  1. Ultimate strength analysis of thin plated structures using eigen-functions. 3rd Report. Application to reliability analysis; Koyu kansu wo mochiita usuita kozobutsu no dansosei kaisekiho. 3. Shinraisei kaiseki eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Ueda, Y [Osaka University, Osaka (Japan). Welding Research Institute; Masaoka, K; Okada, H [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering

    1997-12-31

    A reliability analysis was performed on ultimate strength of a hull by introducing reliability engineerings into the idealized structural unit method. Elements developed under the present study were applied to a model of an actual structure to indicate that even an analysis requiring much time under the finite element method can be performed in a short time and at high accuracy when this method is used. Analysis acted with bending moment and shear force simultaneously was performed on a model used as a structure in experiments carried out by Nishihara, assuming pure bending moment and longitudinal strength during slamming. Then, a reliability analysis was conducted on the same model based on this analysis method to investigate the ultimate strength. In an analysis of an ultimate strength when bending and shearing that assume slamming act upon simultaneously, axial force in the hull side decreases as loading increases, wherein how the shearing force increases can be identified clearly. Although existence of initial bends reduces the strength, the effect of variance in the vicinity of the average value on the reliability is rather small, while the effect due to variance in yield stress is greater. 27 refs., 14 figs., 4 tabs.

  2. Determination and calculation of hazardous incident scenarios in accordance with the 3rd hazardous incident administrative instruction. Vol. 2; Ermittlung und Berechnung von Stoerfallablaufszenarien nach Massgabe der 3. Stoerfallverwaltungsvorschrift. Bd. 2: Berechnungsmethoden, aktuelle Modelle und Modellgleichungen

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, W; Rogazewski, P; Schindler, M [TUeV Anlagentechnik GmbH, Berlin-Schoeneberg (Germany). Unternehmensgruppe TUeV Rheinland/Berlin-Brandenburg; Acikalin, A; Albrecht, M; Lambert, M; Steinbach, J [Technische Univ. Berlin (Germany)

    2000-07-01

    At present there are used various of procedures, calculation methods, models and model equations for hazardous incident scenarios. The procedure on principle is varying often. This guideline explains in one main part and six appendixes the methodical procedure to select specifications and assumptions on hazardous incident scenarios and their processing. Hazardous incident scenarios lead to information on emergency preparedness planning. Both general viewpoints and possibilities are shown, how to find necessary basic assumptions on a hazardous incident scenario from information on hazardous substances, on comparable hazardous incidents and on conditions of the site and the plant. Appendixes deal with precise instructions distinguished between substance release, explosion and fire (app. 1: Assessment of source terms, app. 2: Assessment of dispersion, app. 3: Assessment of effects). Appendix 4 gives explanations to appendixes 1, 2 and 3. Appendix 5 contains a collection of 15 examples of hazardous incident scenarios, which illustrate and comment the methodical procedure. Appendix 6 describes and comments software available on German market which assists the calculating of hazardous incidents. Volume 2 determines procedures with regard to methods of calculation, current models and model equations from scientists point of view. (orig.) [German] Derzeit wird eine Vielzahl von Vorgehensweisen, Berechnungsmethoden, Modellen und Modellgleichungen fuer Stoerfallablaufszenarien verwendet. Das prinzipielle Vorgehen ist haeufig unterschiedlich. Dieser Leitfaden enthaelt in einem Hauptteil und sechs Anhaengen das methodische Vorgehen zur Auswahl von Angaben und Annahmen fuer Stoerfallablaufszenarien sowie deren Bearbeitung. Stoerfallablaufszenarien fuehren zu Angaben fuer die Gefahrenabwehrplanung. Fuer das Ableiten von Stoerfallablaufszenarien sind sowohl allgemeine Gesichtspunkte als auch Moeglichkeiten dargelegt, wie man aus Angaben zu Gefahrstoffen, zu vergleichbaren

  3. Determination and calculation of hazardous incident scenarios in accordance with the 3rd hazardous incident administrative instruction. Vol. 1; Ermittlung und Berechnung von Stoerfallablaufszenarien nach Massgabe der 3. Stoerfallverwaltungsvorschrift. Bd. 1: Methodischer Teil zum Erarbeiten von Stoerfallablaufszenarien

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, W.; Rogazewski, P.; Schindler, M. [TUeV Anlagentechnik GmbH, Berlin-Schoeneberg (Germany). Unternehmensgruppe TUeV Rheinland/Berlin-Brandenburg; Acikalin, A.; Albrecht, M.; Lambert, M.; Steinbach, J. [Technische Univ. Berlin (Germany)

    2000-07-01

    At present there are used various procedures, calculation methods, models and model equations for hazardous incident scenarios. The procedure on principle is varying often. This guideline explains in one main part and six appendixes the methodical procedure to select specifications and assumptions on hazardous incident scenarios and their processing. Hazardous incident scenarios lead to information on emergency preparedness planning. Both general viewpoints and possibilities are shown, how to find necessary basic assumptions on a hazardous incident scenario from information on hazardous substances, on comparable hazardous incidents and on conditions of the site and the plant. Appendixes deal with precise instructions distinguished between substance release, explosion and fire (App. 1: Assessment of source terms, App. 2: Assessment of dispersion, App. 3: Assessment of effects). Appendix 4 gives explanations to appendixes 1, 2 and 3. Appendix 5 contains a collection of 15 examples of hazardous incident scenarios, which illustrate and comment the methodical procedure. Appendix 6 describes and comments software available on German market which assists the calculating of hazardous incidents. Volume 2 determines procedures with regard to methods of calculation, current models and model equations from scientists' point of view. (orig.) [German] Derzeit wird eine Vielzahl von Vorgehensweisen, Berechnungsmethoden, Modellen und Modellgleichungen fuer Stoerfallablaufszenarien verwendet. Das prinzipielle Vorgehen ist haeufig unterschiedlich. Dieser Leitfaden enthaelt in einem Hauptteil und sechs Anhaengen das methodische Vorgehen zur Auswahl von Angaben und Annahmen fuer Stoerfallablaufszenarien sowie deren Bearbeitung. Stoerfallablaufszenarien fuehren zu Angaben fuer die Gefahrenabwehrplanung. Fuer das Ableiten von Stoerfallablaufszenarien sind sowohl allgemeine Gesichtspunkte als auch Moeglichkeiten dargelegt, wie man aus Angaben zu Gefahrstoffen, zu vergleichbaren

  4. Characterization of Extended spectrum beta-lactamases (ESBL)-producing Escherichia coli obtained from Danish pigs, pig farmers and their families from farms with high or no consumption of 3rd or 4th generation cephalosporins

    DEFF Research Database (Denmark)

    Hammerum, Anette M.; Larsen, Jesper; Dalhoff Andersen, Vibe

    2014-01-01

    -generation cephalosporin use and 19 herds with previous frequent use were included. The ESBL-producing isolates detected in humans and pigs were characterized by ESBL genotype, PFGE, susceptibility to non-b-lactam antibiotics and phylotype, and selected isolates were characterized by multilocus sequence typing (MLST......Objectives: To compare and characterize extended-spectrum b-lactamase (ESBL)-producing Escherichia coli from pigsties, pig farmers and their families on farms with previous high or no use of third- or fourth-generation cephalosporins. Methods: Twenty farms with no third- or fourth...

  5. The coordinated research project on use of irradiation to ensure the safety and quality of prepared meals. Proceedings of the 3rd FAO/IAEA research coordination meeting (RCM). Working material

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Although extensive research has been carried out on the microbiological and sensorial effects of irradiating individual uncooked food items, little work has been reported on the irradiation of complex food systems such as prepared meals. In this Coordinated Research Project (CRP), the potential of using the irradiation technology for convenience foods has been investigated with regard to safety, shelf-life and overall quality, particularly in terms of sensory acceptance. A wide range of ethnic meals as well as meal components were investigated with the objective of meeting continual changes in consumer demands worldwide. Other aspects of the CRP included the adoption of a Hazard Analysis Critical Control Point (HACCP) system for prepared meals and research into consumer willingness to purchase irradiated food at a premium price. The scope of the CRP was therefore wide-ranging. The overall objective of this CRP was to evaluate the effectiveness of irradiation as a method to ensure the microbiological safety and extend the shelf-life of prepared meals, stored under ambient, chilled or frozen conditions, and to evaluate the sensory quality of the treated products. The specific objective of the CRP was to use validated procedures for irradiation treatment and process control, and to use validated methods for assessing microbiological safety and quality as well as the sensory quality of prepared meals mainly of ethnic origin.

  6. 28th Solar Energy Promotion Committee Meeting - 3rd Solar Cell Liaison Meeting. Report for fiscal 1990; Dai 28 kai taiyo energy suishin iinkai dai 3 kai taiyo denchi renrakukai. 1980 nendo hokoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-05-14

    The above events took place in Tokyo in the period May 14-17, 1991, when a total of 89 essays were presented. In relation with the thin film/a-Si systems, 55 presentations were given, which were 'Novel preparation technique termed Chemical Annealing for making a-Si:H with a rigid and stable Si-network,' 'Interface characteristics of a-Si:H films prepared by VHF (very high frequency) plasma CVD (chemical vapor deposition),' 'Preparation of amorphous superlattices by continuous method and characterization of the interface,' etc. In relation with the thin film/compound systems, 8 presentations were given, which were 'Preparation of CuInSe{sub 2} solar cells by selenization method,' 'Deposition of CuInSe{sub 2} films by ICB (ionized cluster beam) technique and their optical characterization,' 'Large-area CdS/CdTe solar cells,' etc. In relation with the crystal/compound systems, 8 presentations were given, which were 'Lattice strain relaxation processes in GaAs grown on Si,' 'Optical transmission studies of tandem solar cells,' etc. In relation with the crystal/Si systems, 18 presentations were given, which were 'Effect of electric field on effective minority carrier lifetime,' 'Computer analysis of surface recombination velocity for high efficiency crystalline silicon solar cells,' etc. (NEDO)

  7. The coordinated research project on use of irradiation to ensure the safety and quality of prepared meals. Proceedings of the 3rd FAO/IAEA research coordination meeting (RCM). Working material

    International Nuclear Information System (INIS)

    2006-01-01

    Although extensive research has been carried out on the microbiological and sensorial effects of irradiating individual uncooked food items, little work has been reported on the irradiation of complex food systems such as prepared meals. In this Coordinated Research Project (CRP), the potential of using the irradiation technology for convenience foods has been investigated with regard to safety, shelf-life and overall quality, particularly in terms of sensory acceptance. A wide range of ethnic meals as well as meal components were investigated with the objective of meeting continual changes in consumer demands worldwide. Other aspects of the CRP included the adoption of a Hazard Analysis Critical Control Point (HACCP) system for prepared meals and research into consumer willingness to purchase irradiated food at a premium price. The scope of the CRP was therefore wide-ranging. The overall objective of this CRP was to evaluate the effectiveness of irradiation as a method to ensure the microbiological safety and extend the shelf-life of prepared meals, stored under ambient, chilled or frozen conditions, and to evaluate the sensory quality of the treated products. The specific objective of the CRP was to use validated procedures for irradiation treatment and process control, and to use validated methods for assessing microbiological safety and quality as well as the sensory quality of prepared meals mainly of ethnic origin

  8. Recycling World Congress, 3rd, Basel, Switzerland, September 29-October 1, 1980, Proceedings. Sessions 1-2 /Day 1/, Sessions 3-4 /Day 2/, and Sessions 5-6 /Day 3/

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The recovery of useful products from refuse was examined in terms of the use of research waste to produce heat, the generation of CH/sub 4/ from waste, pyrolysis resource recovery, and fuel production from municipal solid waste. The fabrication of building blocks from cement and asbestos factory wastes was discussed, along with the production of ferro-chromium from slags and the use of secondary lead. Attention was also given to recycling metallic incinerator waste, the pyrolysis of plastic wastes scrap in a fluidized bed, and recycling discarded tires as fuel for a cement plant. Various treatments for the reuse of municipal trash were explored and the recovery of usable chemical wastes was described. Sewage sludge and household wastes were investigated for useful products, compost wastes were chemically analyzed, especially for heavy metals, and methods of recycling plastics in all forms were presented.

  9. 28th Solar Energy Promotion Committee Meeting - 3rd Solar Cell Liaison Meeting. Report for fiscal 1990; Dai 28 kai taiyo energy suishin iinkai dai 3 kai taiyo denchi renrakukai. 1980 nendo hokoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-05-14

    The above events took place in Tokyo in the period May 14-17, 1991, when a total of 89 essays were presented. In relation with the thin film/a-Si systems, 55 presentations were given, which were 'Novel preparation technique termed Chemical Annealing for making a-Si:H with a rigid and stable Si-network,' 'Interface characteristics of a-Si:H films prepared by VHF (very high frequency) plasma CVD (chemical vapor deposition),' 'Preparation of amorphous superlattices by continuous method and characterization of the interface,' etc. In relation with the thin film/compound systems, 8 presentations were given, which were 'Preparation of CuInSe{sub 2} solar cells by selenization method,' 'Deposition of CuInSe{sub 2} films by ICB (ionized cluster beam) technique and their optical characterization,' 'Large-area CdS/CdTe solar cells,' etc. In relation with the crystal/compound systems, 8 presentations were given, which were 'Lattice strain relaxation processes in GaAs grown on Si,' 'Optical transmission studies of tandem solar cells,' etc. In relation with the crystal/Si systems, 18 presentations were given, which were 'Effect of electric field on effective minority carrier lifetime,' 'Computer analysis of surface recombination velocity for high efficiency crystalline silicon solar cells,' etc. (NEDO)

  10. Larvicidal Activity of A Mixture of Cashew Nut Shell Liquid and Water-Soluble Extract of Soap Nut Fruit (Sapindus rarak DC. Against 3rd Instar Larvae of Aedes aegypti

    Directory of Open Access Journals (Sweden)

    Glory Resia Raraswati

    2015-10-01

    Full Text Available Cashew Nut Shell Liquid (CNSL which has been known as a waste of processing cashew fruits which is contain phenolic compounds have activity as larvicides. Cashew nut shell liquid is not soluble in the water where the larvae grow. Cashew nut shell liquid mixed with water-soluble extract of soapnut fruit which serves as a natural surfactant that can emulsify oil in water. The test subjects were larvae of Aedes aegypti third instar. Test subjects were divided into treatment group and control group. In the treatment group, test subjects were  the mixture of CNSL and Ethylacetat Soluble Extract (ESE in tap water. The Larvae mortality observations were done 24 hours after the treatment. LC50 and LC90 as final test data were analyzed using probit analysis. Extract constituents   of CNSL and Water Soluble Extract of SoapNut fruit (WSEoSN were  investigated using Thin Layer Chromatography (TLC method. The effect of CNSL as larvicides against third instar larvae of Ae. aegypti with were LC50 of 14,12 ppm, while the LC90 of 24,85 ppm.

  11. The Effect of Acupressure at the 3rd Point of liver Channel on Quality of Life of Female Students with Primary Dysmenorrhea in Tehran Teacher Training Center in 2008: A Randomize Clinical Trial

    Directory of Open Access Journals (Sweden)

    f Bazarganipour

    2012-05-01

    Full Text Available

    Background and Objectives: Dysmenorrhea affects women’s quality of life; moreover it results in physical, mental, social and economical problems. The aim of this study was to evaluate the effect of acupressure at the third point of liver channel (liv3 on quality of life in female students of Tehran Teaching Training (Tarbiat Moallem Center with primary dysmenorrhea. Methods: This single-blind randomized clinical trial was conducted on 194 female students of Nasibeh Tarbiat Moallem center in Tehran who had had inclusion criteria. In the first cycle, the severity and duration of pain and quality of life were determined. Therefore, the participants were randomly assigned to either experimental or control group. In the second, third and fourth cycles, acupressure at liv3 and placebo point during 3-7 days before menstruation for 20 minute were carried out. In the fourth cycle, participants completed SF-36 questionnaire after menstruation again. Data-gathering Instruments used in this study included wrong-Baker faces pain scale,Beck-21 questionarre, SF-36 questionnaire, clock, Acuhealth tens pro 900 set, force guage. Data were analyzed with SPSS 16 and x2 test, Man Whitney U, independent and paired test. P values were set as 0.05(p<0.05. Results: There was no significant difference in mean quality of life dimension between two groups in the first cycle (p>0.05 but there was a significant difference in mean quality of life dimension between two groups in the fourth cycle (p<0.05. The comparison between the first and the fourth cycle in two group showed a significant difference in all dimension (p<0.05 but there was not any significant difference between two cycles in Role Emotional functioning dimension in experimental group (p>0.05. Moreover, there was no significant difference between two cycles in Role Emotional functioning and social functioning dimensions

  12. Strengthening the influenza vaccine virus selection and development process: Report of the 3rd WHO Informal Consultation for Improving Influenza Vaccine Virus Selection held at WHO headquarters, Geneva, Switzerland, 1-3 April 2014.

    Science.gov (United States)

    Ampofo, William K; Azziz-Baumgartner, Eduardo; Bashir, Uzma; Cox, Nancy J; Fasce, Rodrigo; Giovanni, Maria; Grohmann, Gary; Huang, Sue; Katz, Jackie; Mironenko, Alla; Mokhtari-Azad, Talat; Sasono, Pretty Multihartina; Rahman, Mahmudur; Sawanpanyalert, Pathom; Siqueira, Marilda; Waddell, Anthony L; Waiboci, Lillian; Wood, John; Zhang, Wenqing; Ziegler, Thedi

    2015-08-26

    Despite long-recognized challenges and constraints associated with their updating and manufacture, influenza vaccines remain at the heart of public health preparedness and response efforts against both seasonal and potentially pandemic influenza viruses. Globally coordinated virological and epidemiological surveillance is the foundation of the influenza vaccine virus selection and development process. Although national influenza surveillance and reporting capabilities are being strengthened and expanded, sustaining and building upon recent gains has become a major challenge. Strengthening the vaccine virus selection process additionally requires the continuation of initiatives to improve the timeliness and representativeness of influenza viruses shared by countries for detailed analysis by the WHO Global Influenza Surveillance and Response System (GISRS). Efforts are also continuing at the national, regional, and global levels to better understand the dynamics of influenza transmission in both temperate and tropical regions. Improved understanding of the degree of influenza seasonality in tropical countries of the world should allow for the strengthening of national vaccination policies and use of the most appropriate available vaccines. There remain a number of limitations and difficulties associated with the use of HAI assays for the antigenic characterization and selection of influenza vaccine viruses by WHOCCs. Current approaches to improving the situation include the more-optimal use of HAI and other assays; improved understanding of the data produced by neutralization assays; and increased standardization of serological testing methods. A number of new technologies and associated tools have the potential to revolutionize influenza surveillance and response activities. These include the increasingly routine use of whole genome next-generation sequencing and other high-throughput approaches. Such approaches could not only become key elements in outbreak

  13. Time-Shift in the OPERA set-up: proof against superluminal neutrinos without the need of knowing the CERN-LNGS distance and Reminiscences on the origin of the Gran Sasso Lab, of the 3rd neutrino and of the "Teramo Anomaly"

    CERN Document Server

    Zichichi, Antonino

    2012-01-01

    The LVD time stability allows to establish a time-shift in the OPERA experiment, thus providing the first proof against Superluminal neutrinos, using the horizontal muons of the "Teramo Anomaly". This proof is particularly interesting since does not need the knowledge of the distance between the place where the neutrinos are produced (CERN) and the place where they are detected (LNGS). Since the Superluminal neutrinos generated in the physics community a vivid interest in good and bad behaviour in physics research, the author thought it was appropriate to recall the origin of the Gran Sasso Lab, of the 3rd neutrino, of the horizontal muons due to the "Teramo Anomaly" and of the oscillation between leptonic flavours, when the CERN-Gran Sasso neutrino beam was included in the project for the most powerful underground Laboratory in the world.

  14. Joint Force Quarterly. Issue 54, 3rd Quarter 2009

    Science.gov (United States)

    2009-07-01

    sensibilities , values, and law. It also may be possible to use educa- tional techniques to change the attitudes of enemy fighters as well. Finally, some...well, but decisionmakers should ask them to do sensible , useful things. As I write, we are sending 21,000 addi- tional American troops to Afghanistan...operations intended initially to restore public order in murder-wracked Ciudad Juárez, Tijuana, and other cities in northern Mexico. It quickly became

  15. 3rd International Conference on Harmony Search Algorithm

    CERN Document Server

    2017-01-01

    This book presents state-of-the-art technical contributions based around one of the most successful evolutionary optimization algorithms published to date: Harmony Search. Contributions span from novel technical derivations of this algorithm to applications in the broad fields of civil engineering, energy, transportation & mobility and health, among many others and focus not only on its cross-domain applicability, but also on its core evolutionary operators, including elements inspired from other meta-heuristics. The global scientific community is witnessing an upsurge in groundbreaking, new advances in all areas of computational intelligence, with a particular flurry of research focusing on evolutionary computation and bio-inspired optimization. Observed processes in nature and sociology have provided the basis for innovative algorithmic developments aimed at leveraging the inherent capability to adapt characterized by various animals, including ants, fireflies, wolves and humans. However, it is the beha...

  16. 3rd Miami international conference on alternative energy sources

    International Nuclear Information System (INIS)

    Nejat Veziroglu, T.

    1980-01-01

    The conference includes sessions on solar energy, ocean thermal energy, wind energy, hydro power, nuclear breeders and nuclear fusion, synthetic fuels from coal or wastes, hydrogen production and uses, formulation of workable policies on energy use and energy conservation, heat and energy storage, and energy education. The volume of the proceedings presents the papers and lectures in condensed format grouped by subject under forty-two sessions for 319 presentations

  17. 3rd CERN-Fermilab Hadron Collider Physics Summer School

    CERN Multimedia

    2008-01-01

    August 12-22, 2008, Fermilab The school web site is http://cern.ch/hcpss with links to the academic programme and the application procedure. The APPLICATION DEADLINE IS 29 FEBRUARY 2008. The goal of the CERN-Fermilab Hadron Collider Physics Summer Schools is to offer students and young researchers in high-energy physics a concentrated syllabus on the theory and experimental challenges of hadron collider physics. The third session of the summer school will focus on exposing young post-docs and advanced graduate students to broader theories and real data beyond what they’ve learned at their home institutions. Experts from across the globe will lecture on the theoretical and experimental foundations of hadron collider physics, host parallel discussion sessions and answer students’ questions. This year’s school will also have a greater focus on physics beyond the Standard Model, as well as more time for questions at the end of each lecture. The 2008 School will be held at ...

  18. 3rd International Conference on Sustainable Design and Manufacturing

    CERN Document Server

    Howlett, Robert; Liu, Ying; Theobald, Peter

    2016-01-01

    This volumes consists of 59 peer-reviewed papers, presented at the International Conference on Sustainable Design and Manufacturing (SDM-16) held in Chania, Crete Greece in April 2016. Leading-edge research into sustainable design and manufacturing aims to enable the manufacturing industry to grow by adopting more advanced technologies, and at the same time improve its sustainability by reducing its environmental impact. SDM-16 covers a wide range of topics from sustainable product design and service innovation, sustainable process and technology for the manufacturing of sustainable products, sustainable manufacturing systems and enterprises, decision support for sustainability, and the study of societal impact of sustainability including research for circular economy. Application areas are wide and varied. The book will provide an excellent overview of the latest research and development in the area of Sustainable Design and Manufacturing.

  19. EMSL Quarterly Highlights Report: FY 2008, 3rd Quarter

    Energy Technology Data Exchange (ETDEWEB)

    Showalter, Mary Ann

    2008-09-16

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2007 - December 2007) of Fiscal Year 2008.

  20. Greater Philadelphia Bioinformatics Alliance (GPBA) 3rd Annual Retreat 2005

    Science.gov (United States)

    2005-11-01

    Biotech in recent days. The start of Biotech from the Agriculture ie rural side will be discussed and advancement will be discussed in detail towards...such advances in the food and Agricultural aspect. The significant results which not only makes the advancements of the understanding the public but...authored journal publications in human genetics, bioethics for industry and genetics education. Karl V. Steiner, Dr. Ing., Associate Director, Delaware

  1. Consensus Statement on Concussion in Sport – the 3rd ...

    African Journals Online (AJOL)

    affecting the brain, induced by traumatic biomechanical forces. .... from parents, coaches, teammates and eyewitness to the in- jury. .... level, athletes allowed to RTP on the same day may demonstrate NP ... Following medical clearance confidence and ... that age children report different concussion symptoms different from.

  2. Entrepreneurship and Small Business : 3rd Asia-Pacific Edition

    OpenAIRE

    Schaper, Michael; Volery, Thierry; Weber, Paull; Lewis, Kate

    2010-01-01

    (See also PDF) PART 1 The nature of small business and entrepreneurship. CHAPTER 1 Entrepreneurship: definition and evolution. CHAPTER 2 The personality of entrepreneurs. CHAPTER 3 Creativity, innovation and entrepreneurship. CHAPTER 4 Small business: definitions and characteristics. PART 2 Getting into business. CHAPTER 5 Options for going into business. CHAPTER 6 Market research and strategy formulation. CHAPTER 7 Preparing a business plan. CHAPTER 7 ...

  3. Basic imaging in congenital heart disease. 3rd Ed

    International Nuclear Information System (INIS)

    Swischuk, L.E.; Sapire, D.W.

    1986-01-01

    The book retains its previous format with chapters on embryology, plain film interpretation, classification of pulmonary vascular patterns, cardiac malpositions and vascular anomalies, and illustrative cases. The book is organized with an abundance of illustrative figures, diagrams, and image reproductions. These include plain chest radiographs, angiograms, echocardiograms, and MR images. The authors present the pathophysiology and imaging of congenital heart lesions

  4. 3rd International Workshop on Desorption Induced by Electronic Transitions

    CERN Document Server

    Knotek, Michael

    1988-01-01

    These proceedings are the result of the third international workshop on Desorption Induced by Electronic Transitions, DIET III, which took place on Shelter Island, NY, May. 20-22, 1987. The work contained in this volume is an excellent summary of the current status of the field and should be a valuable reference text for both "seasoned" researchers and newcomers in the field of DIET. Based on the success of the meeting it seems clear that interest and enthusiasm in the field is strong. It is also apparent, from the many lively discussions during the meeting, that many unanswered questions (and controversies) remain to be solved. It was particularly pleasing to see many new participants from new and rapidly advancing fields, ranging from gas phase dynamics to semiconductor processing. The resulting cross-fertilization from these separate but related fields is playing an important role in helping us understand desorption processes at solid surfaces. In general, the topics covered during the course of the worksh...

  5. 3rd International Symposium on Innovative Management, Information and Production

    CERN Document Server

    Xu, Bing; Wu, Berlin

    2014-01-01

    Innovative Management in Information and Production is based on the proceedings of the Third International Symposium on Innovative Managemet, Information and Production. This symposium is held by International Society of Management Engineers. The symposium took place on October 8-10, in Ho Chi Minh City, Vietnam. This book examines recent innovative management of information and productions such as digital collection management and operations planning, scheduling and control.

  6. 3rd International Workshop on Critical Systems Development with UML

    OpenAIRE

    Jan Jürjens; Eduardo B. Fernandez; Robert France; Bernhard Rumpe

    2017-01-01

    Topics of the Workshop include: --- Applications of UML to real-time systems security-critical systems dependable / safety-critical systems performance-critical systems embedded systems hybrid systems reactive systems --- Extensions of UML (UML-RT, UMLsec, Automotive UML, Embedded UML, ...) and new developments (UML 2.0, MDA) --- Modeling, synthesis, model transformation, code generation, testing, validation, and verification of critical systems using UML --- Aspect-oriented or Component-base...

  7. Business planning for scientists and engineers[3rd edition]; TOPICAL

    International Nuclear Information System (INIS)

    Servo, Jenny C.

    1999-01-01

    This combination text/workbook is intended for use by scientists or engineers actively engaged in developing a product or technology to commercial production. The 'how' of planning is a central theme with special emphasis on development of operational plans and strategic thinking

  8. Pediatric Dentistry: A Clinical Approach, 3rd Edition

    DEFF Research Database (Denmark)

    Pediatric Dentistry: A Clinical Approach, Third Edition provides a uniquely clear, comprehensive, and clinical approach to the dental treatment of children and adolescents. •Offers systematic coverage of all clinical, scientific and social topics relating to pediatric dentistry •Thoroughly revised...

  9. Joint Force Quarterly. Issue 42, 3rd Quarter, July 2006

    Science.gov (United States)

    2006-07-01

    Staff and Service staffs are organized on lines created by Napoleon, not necessarily optimized for digital communications and reachback or the...traffickers. The resources and ambition of the Medellin and Cali cartels made them national threats because they fielded armies of their own, carried

  10. 3rd International Winter School and Conference on Network Science

    CERN Document Server

    Barzel, Baruch; Puzis, Rami

    2017-01-01

    This book contains original research chapters related to the interdisciplinary field of complex networks spanning biological and environmental networks, social, technological, and economic networks. Many natural phenomena can be modeled as networks where nodes are the primitive compounds and links represent their interactions, similarities, or distances of sorts. Complex networks have an enormous impact on research in various fields like biology, social sciences, engineering, and cyber-security to name a few. The topology of a network often encompasses important information on the functionality and dynamics of the system or the phenomenon it represents. Network science is an emerging interdisciplinary discipline that provides tools and insights to researchers in a variety of domains. NetSci-X is the central winter conference within the field and brings together leading researchers and innovators to connect, meet, and establish interdisciplinary channels for collaboration. It is the largest and best known even...

  11. The cogeneration and small power production manual. 3rd edition

    International Nuclear Information System (INIS)

    Spiewak, S.A.

    1990-01-01

    This book is divided into six sections covering regulations, environmental issues, engineering, contract, financing, and taxes. The edition adds a comprehensive 80-page chapter outlining how to prepare for electric power shortages, including details on rate structure, tariff negotiation, contract-based rates, partial requirement service, supplementary, backup, and interruptible rates, and retail sale of electric power. The engineering section covers optimum cogeneration system design, operational considerations, and energy efficiency. Combustion turbines, diesel engines, gas engines, rotary engines, steam turbines, and electric generators are covered in detail

  12. Joint Force Quarterly. Issue 70, 3rd Quarter, July 2013

    Science.gov (United States)

    2013-07-01

    hepatitis, typhoid fever, plague, malaria, or cholera .7 During Operations Iraqi Freedom and Enduring Freedom from 2001 to 2006, evacu- ations for...troops as the 1885–1886 Geronimo Campaign used operating over the same terrain in northern Mexico —11,000 versus 5,000. Yet it was the earlier...partnership with Pakistan was critical for operational success. As with Mexico during the Punitive Expedition and Honduras during the Sandino affair

  13. Resource Guide to Careers in Toxicology, 3rd Edition.

    Science.gov (United States)

    Society of Toxicology, Reston, VA.

    This resource guide was prepared by the Tox 90's Educational Issues Task Force of the Society of Toxicology. The introduction provides information on the Society of Toxicology and financial support for graduate students in toxicology. Other sections include career opportunities in toxicology, academic and postdoctoral programs in toxicology, and…

  14. Conference on the Neurobiology of Learning and Memory (3rd)

    Science.gov (United States)

    1988-09-23

    TREATMENT IN PARADOXICAL SLEEP I. Portell-Cortes, DEPRIVATION PLATFORMS IN RATS . Norpdo-Bernal Area do Psicobiologia Dept. de Psicologia do la Salut Univ...Ignacio Morgado-Bernal Dr. Georges Moroz Area de Psicobiologia CNS Development Psicologia do la Salud CIBA-GEIGY Corp. Univ. Autonoma do Barcelona DEV

  15. Microstructure Modeling of 3rd Generation Disk Alloy

    Science.gov (United States)

    Jou, Herng-Jeng

    2008-01-01

    The objective of this initiative, funded by NASA's Aviation Safety Program, is to model, validate, and predict, with high fidelity, the microstructural evolution of third-generation high-refractory Ni-based disc superalloys during heat treating and service conditions. This initiative is a natural extension of the DARPA-AIM (Accelerated Insertion of Materials) initiative with GE/Pratt-Whitney and with other process simulation tools. Strong collaboration with the NASA Glenn Research Center (GRC) is a key component of this initiative and the focus of this program is on industrially relevant disk alloys and heat treatment processes identified by GRC. Employing QuesTek s Computational Materials Dynamics technology and PrecipiCalc precipitation simulator, physics-based models are being used to achieve high predictive accuracy and precision. Combining these models with experimental data and probabilistic analysis, "virtual alloy design" can be performed. The predicted microstructures can be optimized to promote desirable features and concurrently eliminate nondesirable phases that can limit the reliability and durability of the alloys. The well-calibrated and well-integrated software tools that are being applied under the proposed program will help gas turbine disk alloy manufacturers, processing facilities, and NASA, to efficiently and effectively improve the performance of current and future disk materials.

  16. Joint Force Quarterly. Issue 66, 3rd Quarter 2012

    Science.gov (United States)

    2012-07-01

    ndu.edu Executive Summary A colleague of mine who teaches at the National War College recently returned from his annual visit to Afghanistan. This trip...planner uses intel- ligence to link the target to the effect, deter- mine access, pick the appropriate capability, and maintain the target in the...Headquarters, Tel Aviv, March 27, 2008. 15 Barbara Opall -Rome, “Interview with Major General Eliezer Shkedy, Commander, Israel Air and Space Force

  17. Pet Care Teaching Unit: 1st-3rd Grades.

    Science.gov (United States)

    Peninsula Humane Society, San Mateo, CA.

    Activities in this unit are designed to familiarize primary grade students with the responsibilities involved in pet ownership. Teaching plans are provided for a total of 12 lessons involving social studies, language arts, math, and health sciences. Activities adaptable for readers and non-readers focus on pet overpopulation, care of pets when…

  18. The EPR - technology for the 3rd Millennium

    International Nuclear Information System (INIS)

    Bernstrauch, O.

    2000-01-01

    The Basic Design of the European Pressurized Water Reactor (EPR) was completed 1997 , the Basic Design Optimization Phase 1998 and the Detailed Design Phase will start in the near future. With these milestones, a new generation of PWRs is moving forward. Most of all, this is another story of a successful Franco-German cooperation. It is a rundown of the history of the EPR, before a decision is made to launch the lead-unit construction. The EPR project was launched in 1992 by Nuclear Power International (NPI), a joint company of FRAMATOME and Siemens KWU, supported by EDF and nine German electric utilities. Each step of the development of the EPR was harmonized with the Nuclear Safety Authorities both in France and Germany to reach an early approval. The EPR integrates the latest technological advances, especially in safety and operational aspects and comprises more than 30 years operating experience. Thus, the EPR combines the qualities of its predecessors, the French N4 and the German Konvoi. Presently, Siemens KWU and FRAMATOME are preparing the detailed design phase and the following construction and commissioning phase. The decision to build an EPR is not yet made either by the German electric utilities or by EdF, but it will be expected within the next months as a strong statement to follow the nuclear way and to ensure the know-how transfer. (author)

  19. Radar principles for the nonspecialist, 3rd edition

    CERN Document Server

    Toomay, John

    2004-01-01

    Radar Principles for the Non-specialist, Third Edition continues its popular tradition: to distill the very complex technology of radar into its fundamentals, tying them to the laws of nature on one end and to the most modern and complex systems on the other. It starts with electromagnetic propagation, describes a radar of the utmost simplicity, and derives the radar range equation from that simple radar. Once the range equation is available, the book attacks the meaning of each term in it, moving through antennas, detection and tracking, radar cross-section, waveforms andsignal proces

  20. 3rd International Conference on Advanced Computing, Networking and Informatics

    CERN Document Server

    Mohapatra, Durga; Chaki, Nabendu

    2016-01-01

    Advanced Computing, Networking and Informatics are three distinct and mutually exclusive disciplines of knowledge with no apparent sharing/overlap among them. However, their convergence is observed in many real world applications, including cyber-security, internet banking, healthcare, sensor networks, cognitive radio, pervasive computing amidst many others. This two volume proceedings explore the combined use of Advanced Computing and Informatics in the next generation wireless networks and security, signal and image processing, ontology and human-computer interfaces (HCI). The two volumes together include 132 scholarly articles, which have been accepted for presentation from over 550 submissions in the Third International Conference on Advanced Computing, Networking and Informatics, 2015, held in Bhubaneswar, India during June 23–25, 2015.

  1. Joint Force Quarterly. Issue 38, 3rd Quarter, July 2005

    Science.gov (United States)

    2005-07-01

    military ones. The reason is that it’s harder to get to geocentric orbit than the grocery store, that no one is shooting at the Coca Cola Company...and enhanced negotiating power in dealing with corporate sponsorships . The launch of the PSCC concept should ini- tiate critical research on the link

  2. Vom work Book Journal, 2011 3rd Edition

    African Journals Online (AJOL)

    USER

    relieve constipation in man and animals. Senna cinnamonum is the source of aromatic stomachic, ... feeding the plant to the animals. KEYWORDS: Senna obtusifolia, feedstuff, digestibility, ... Vol. 32(3): 2011; 199 - 203. ARTICLE. Utilization of Senna obtusifolia as a Potential Non-Conventional Feedstuff. In Sheep. 1. 2. 2. 1.

  3. Hydrogen fuel cell vehicles for the 3rd millenniums

    International Nuclear Information System (INIS)

    Fahmy, F.H.

    2006-01-01

    As the world population increases, so does the demand for transportation. Automobiles, being the most common means of transportation are on of the main sources pollution. Therefore, in order to meet the needs of society and to protect the environment, scientists began looking for a new solution to this problem. Before they suggested any answers, the scientists first looked at all aspects surrounding the issue. Fuel cell can be promoted energy diversity and a transition to renewable energy sources. This paper presents a new friendly environmental vehicles. The fuel of this vehicles is a renewable sources, solar radiation, PV arrays, electrolyzer, hydrogen and fuel cell. All the results show the capability of vehicle's design with all the details of each main component for several varieties of vehicles for transportation. This new idea realizes clean and healthy environment vehicles

  4. Case report 466: Granulomatous tenosynovitis (left 3rd finger)

    International Nuclear Information System (INIS)

    Waggenspack, G.A.; Amparo, E.G.

    1988-01-01

    The magnetic resonance features of a digital flexor tendon sheath mass are described in a patient with a painless enlarged digit. MRI provided precise anatomical localization of a caseating granulomatous mass within the flexor tendon sheath space and facilitated definitive surgical treatment, whereas the radiographic findings showed soft tissue swelling of the phalanx but were unable to compartmentalize or characterize the underlying abnormality. (orig.)

  5. Case report 466: Granulomatous tenosynovitis (left 3rd finger)

    Energy Technology Data Exchange (ETDEWEB)

    Waggenspack, G.A.; Amparo, E.G.

    1988-03-01

    The magnetic resonance features of a digital flexor tendon sheath mass are described in a patient with a painless enlarged digit. MRI provided precise anatomical localization of a caseating granulomatous mass within the flexor tendon sheath space and facilitated definitive surgical treatment, whereas the radiographic findings showed soft tissue swelling of the phalanx but were unable to compartmentalize or characterize the underlying abnormality.

  6. Joint Force Quarterly. Issue 74, 3rd Quarter, July 2014

    Science.gov (United States)

    2014-07-01

    conference including references to rape that ended up on YouTube , though it was later removed.20 But the standard administrative approach to...Great Depression .17 WTO func- tions include: • facilitating negotiations between nations for development and enhancement of international...from opening training academies for farmers and management, to facilitating trips to Iraq for Google and YouTube execu- tives, to helping rebuild gas

  7. estec2007 - 3rd European solar thermal energy conference. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-12-14

    The sessions of the 'estec2007 - 3{sup rd} European Solar Thermal Energy Conference held in Freiburg, Germany have the following titles: The solar thermal sector at a turning point; Cooling and Process Heat, Country reports Europe; Standards and Certification; Country reports outside Europe; Awareness raising and marketing; Domestic hot water and space heating; Domestic hot water and space heating; Quality Assurance and Solar Thermal Energy Service Companies; Collectors and other key technical issues; Policy - Financial incentives; Country Reports; Marketing and Awareness Raising; Quality Assurance Measures/Monistoring; Standards and Certification; Collectors; Domestic Hot Water and Space Heating; Industrial Process Heat; Storage; Solar Cooling. (AKF)

  8. 3rd AINSE neutron scattering conference, Lucas Heights -AINSE Theatre

    International Nuclear Information System (INIS)

    1986-01-01

    Abstracts of papers, the conference program and general information is included in the conference handbook. The program is divided into the following sessions: hydrogeneous and biological materials, industrial applications, phase transitions, magnetism, small angle neutron scattering and new developments

  9. Vom work Book Journal, 2011 3rd Edition

    African Journals Online (AJOL)

    USER

    fascia of the Sartorius muscle. The skin flaps were brought in apposition and the edges were sutured with interrupted suture using Nylon. The suture on the skin was removed twelve days post surgery. POST OPERATIVE CARE. The bitch was injected Penicillin at the dose of. 10,000IU/Kg IM and Streptomycin at the dose.

  10. Startup Notification Report 3rd Quarter FY17.

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, Roger D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Petti, Jason P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-11-01

    This activity is being revised based on the November 2016 Project Plan and Installation Plan. These documents were developed and issued due to a change in the design responsibilities, assigned project personnel and the change in the installation of the RCS subsystems.

  11. Instrumentation project of 3rd desalination plant at Tuas (Singapore)

    OpenAIRE

    Charco Iniesta, Sara

    2016-01-01

    This project consists on the description of instrumentation used in Tuas III desalination plant at Singapore and its flow process description. The project has been developed as part of the work of the instrumentation department of the responsible company of the engineering design of Tuas III desalination plant. First of all is important to know the water problems which suffer all the people who live in Singapore. Singapore is a city-state and is home to 5.5 million residents. The coun...

  12. 3rd quarterly report 1976 of the Fast Breeder Project

    International Nuclear Information System (INIS)

    1976-12-01

    The report describes activities which were performed within the framework of the Fast Breeder Project at the Gesellschaft fuer Kernforschung mbH Karlsruhe (GfK) or on behalf of the GfK during the third quarter. It contains contributions on the following subjects: Fuel rod development, material studies and development, corrosion tests and coolant analyses, physical experiments, reactor theory, safety of fast breeders, instrumentation and signal processing for core monitoring, environmental impacts, sodium technology tests, thermo- and fluid-dynamic tests in gas, tests concerning gas-cooled breeders. (HR) [de

  13. Interesting detector shapes for 3rd generation CT

    Energy Technology Data Exchange (ETDEWEB)

    Kachelriess, Marc [Erlangen-Nuernberg Univ., Erlangen (Germany). Inst. of Medical Physics (IMP)

    2011-07-01

    Third generation CT scanners typically comprise detectors which are flat or whose shape is the segment of a cylinder or a sphere that is focussed onto the focal spot of the X-ray source. There appear to be two design criteria that favor this choice of detector shape. One is the possibility of performing fan-beam and cone-beam filtered backprojection in the native geometry (without rebinning) and the other criterium is to enable the use of focussed anti scatter grids. It is less known, however, that other detector shapes may also have these properties. While these designs have been evaluated for 2D CT from a rather theoretical standpoint more than one decade ago we revisit and generalize these considerations, extend them to 3D circular, sequential and spiral cone-beam CT and propose an optimal design in terms of detector costs. (orig.)

  14. China at the beginning of 3rd millennium: geopolitical perspectives

    Directory of Open Access Journals (Sweden)

    Florin Pintescu

    2012-12-01

    Full Text Available The paper presents and briefly examines the main geohistorical, geoeconomic and geostrategic advantages of China, related to this attempt to become a regional hegemonic power and, in special circumstances, a worldwide superpower. First, is presented a historical background of the country, a source of self-confidence and rise of the so-called “Chinese mentality”, different of Western mentality. Further is shown the essence of the Chinese contemporary naval strategy (Haijun Zhanlue, currently an essential element of geostrategy of this country. Policies and economic resources of the country – the fundamental elements of its geopolitics – are more detailed presented. The final part of the article reviews and analyzes the advantages and disadvantages of strategic policy towards Central Asia and China’s fundamental goal – gaining of the regional hegemonic power status.In conclusion, the authors consider that in order to become the first superpower of the world in the next 2-3 decades, China needs a mixture of brilliant leadership, economic growth, modernization (not Westernization!, Chinese mentality and “Chinese way of life” (last two based on Tao. If a single element of this combination will not work properly, this “Chinese dream” will not be achieved.

  15. The effects of participating in the 3rd Nordcode seminar

    DEFF Research Database (Denmark)

    Hansen, Claus Thorp

    dimensions. Designed objects communicate messages in themselves. They have aesthetic qualities and they carry information about their use and usability. Also the design process is very much about communication. The design team communicates about design concepts and communication with users is central...... in the design process? · Conceptualisation - How can designers communicate early design ideas/concepts within a design team? And with potential consumers?” The purpose of this report is to make a balance on my personal outcome of participating in the seminar. I will make this balance by focusing on the overall...

  16. Vom work Book Journal, 2011 3rd Edition

    African Journals Online (AJOL)

    USER

    Iwamato et al.,. 1984; Timson and Dudenhoeffer 1985; Hebert et al., 1988; Kandarian and White, 1989; Roy et al.,. 1991). This may likely be responsible for the growth observed in the individual muscle, especially the gluteobiceps in the hind limb and.

  17. 3rd International Conference on Applied Mathematics and Approximation Theory

    CERN Document Server

    Duman, Oktay

    2016-01-01

    This special volume is a collection of outstanding theoretical articles presented at the conference AMAT 2015, held in Ankara, Turkey from May 28-31, 2015, at TOBB University of Economics and Technology. The collection is suitable for a range of applications: from researchers and practitioners of applied and computational mathematics, to students in graduate-level seminars. Furthermore it will be a useful resource for all science libraries. This book includes 27 self-contained and expertly-refereed chapters that provide numerous insights into the latest developments at the intersection of applied and computational mathematics, engineering, and statistics.

  18. 3rd Miami international conference on alternative energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Nejat Veziroglu, T.

    1980-01-01

    The conference includes sessions on solar energy, ocean thermal energy, wind energy, hydro power, nuclear breeders and nuclear fusion, synthetic fuels from coal or wastes, hydrogen production and uses, formulation of workable policies on energy use and energy conservation, heat and energy storage, and energy education. The volume of the proceedings presents the papers and lectures in condensed format grouped by subject under forty-two sessions for 319 presentations.

  19. 3rd programme 'Energy research and energy technologies'

    International Nuclear Information System (INIS)

    1990-01-01

    In the light of developments in the 80s, the questions of dependence and available resources seem less grave in the long and medium term; on the other hand, a further problem has arisen which might prove even more serious with a view to the safeguarding of long-term energy supply: the use of fossil energy sources such as coal; petroleum, and natural gas involves effects constituting a considerable threat to the environment and the world climate. Examples are acid rain and the greenhouse effect. Furthermore, new safety issues and, to a larger extent, also acceptance issues have arisen as regards nuclear energy utilization. To contribute towards solving these problems by research and development is the main objective of this programme. The strategy adopted comprices two approaches complementary to each other: elaboration of scientific bases, system connections, and new techniques permitting - continued use of primary and secondary energy sources to the extent required while taking into account the needs of an increasingly more vulnerable environment; - to ensure the lowest possible energy consumption in the future, reducing, at the same time, considerably the amount of greenhouse gases emitted. (orig./UA) [de

  20. 3rd Workshop on metal ceramic materials for functional applications

    Energy Technology Data Exchange (ETDEWEB)

    Korb, G [Oesterreichisches Forschungszentrum Seibersdorf, 2444 Seibersdorf (Austria)

    1998-12-31

    This workshop contains contributions about materials and processing, characterization and modeling of properties and applications of metallic ceramics and composite structures. It was held on behalf of the Taiwan-Austrian scientific collaboration in Vienna, June 4{sup th} - 6{sup th} 1997. (Suda)

  1. estec2007 - 3rd European solar thermal energy conference. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-12-14

    The sessions of the 'estec2007 - 3{sup rd} European Solar Thermal Energy Conference held in Freiburg, Germany have the following titles: The solar thermal sector at a turning point; Cooling and Process Heat, Country reports Europe; Standards and Certification; Country reports outside Europe; Awareness raising and marketing; Domestic hot water and space heating; Domestic hot water and space heating; Quality Assurance and Solar Thermal Energy Service Companies; Collectors and other key technical issues; Policy - Financial incentives; Country Reports; Marketing and Awareness Raising; Quality Assurance Measures/Monistoring; Standards and Certification; Collectors; Domestic Hot Water and Space Heating; Industrial Process Heat; Storage; Solar Cooling. (AKF)

  2. Vom work Book Journal, 2011 3rd Edition

    African Journals Online (AJOL)

    USER

    sudden change in diet, a doe's immune system is compromised which consequentially suppressed, if not completely negates ... Department of Veterinary Medicine, Depatment of Veterinary Surgery and Radiology, Department of Theriogenology and Animal. 4. 5. Production, Department of Veterinary Physiology and ...

  3. NS&T Management Observations - 3rd Quarter

    Energy Technology Data Exchange (ETDEWEB)

    Gianotto, David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-07-01

    The INL Management Observation Program (MOP) is designed to improve managers and supervisors understanding of work being performed by employees and the barriers impacting their success. The MOP also increases workers understanding of managements’ expectations as they relate to safety, security, quality, and work performance. Management observations are designed to improve the relationship and trust between employees and managers through increased engagement and interactions between managers and researchers in the field. As part of continuous improvement, NS&T management took initiative to focus on the participation and quality of observations in FY 14. This quarterly report is intended to (a) summarize the participation and quality of management’s observations, (b) assess observations for commonalities or trends related to facility or process barriers impacting research, and (c) provide feedback and make recommendations for improvements NS&T’s MOP.

  4. The 3rd annual Australian contract mining conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Papers discussed: the termination of contract debate - implications for the industry; contract industry`s outlook; viability of contract mining at ERA`s Ranger mine in the Northern Territory; obtaining superior operational performance, and reducing risk, using mining contractors; industry consolidation, contracts and market trends; mining equipment financing - the operating lease alternative; Portman Mining Ltd.; development of contract mining within the coal operations of Eastern Australia; case study - Thiess. contractors` experience in operating the Collinsville coal mine for the MIM/Itochu joint venture; integrating contractor management on mines with duty of care; the risk variables; and conflicting objectives - mine optimisation and the underground contract.

  5. Advanced Aircrew Display Symposium (3rd), 19-20 May.

    Science.gov (United States)

    1976-01-01

    problems that must be solved before the full benefits from these new concepts can be realized. From a display component standpoint, there will be an...are of major concern. Consequently, the Air Force is exploring the po- tential benefits to be gained from the new display technologies which are...periphery of a "heads-up" scan. Fleet pilots tend to mistrust and misuse associated warning lite or annuncia’:or systems associated with "bugout" or " bingo

  6. 3rd Joint Dutch-Brazil School on Theoretical Physics

    CERN Document Server

    2015-01-01

    The Joint Dutch-Brazil School on Theoretical Physics is now in its third edition with previous schools in 2007 and 2011. This edition of the school will feature minicourses by Nima Arkani-Hamed (IAS Princeton), Jan de Boer (University of Amsterdam) and Cumrun Vafa (Harvard University), as well as student presentations. The school is jointly organized with the Dutch Research School of Theoretical Physics (DRSTP) and is intended for graduate students and researchers in the field of high-energy theoretical physics. There is no registration fee and limited funds are available for local and travel support of participants. This school in São Paulo will be preceded by the XVIII J. A. Swieca School in Campos de Jordão.

  7. 3rd ENRI International Workshop on ATM/CNS

    CERN Document Server

    2014-01-01

    The Electronic Navigation Research Institute (ENRI) held its third International Workshop on ATM / CNS in 2013 with the theme of "Drafting the future sky". There is worldwide activity taking place in the research and development of modern air traffic management (ATM) and its enabling technologies in Communication, Navigation and Surveillance (CNS). Pioneering work is necessary to contribute to the global harmonization of air traffic management and control. At this workshop, leading experts in  research, industry and academia from around the world met to share their ideas and approaches on ATM/CNS related topics.

  8. Greater Philadelphia Bioinformatics Alliance (GPBA) 3rd Annual Retreat 2005

    National Research Council Canada - National Science Library

    Russell, David W

    2005-01-01

    .... Our experimental results show strong structural and functional relationships among member proteins within each of the communities identified by our approach, as verified by MIPS complex catalogue...

  9. Consensus Statement on Concussion in Sport – the 3rd ...

    African Journals Online (AJOL)

    International Conference on Concussion in Sport held in. Zurich ... Which symptoms scale is appropriate for this age group? • Which tests are useful ..... a definite role in preventing dental and oro-facial injury. .... from clinical practice, academic and research in the field of sports ... injuries. British journal of sports medicine.

  10. Joint Force Quarterly. Issue 62, 3rd Quarter, July 2011

    Science.gov (United States)

    2011-07-01

    Dividends: White Lobster on the Mosquito Coast,” Time, April 14, 2011. 10 “ El narcotráfico, una amenaza para FF.AA,” El Comercio , January 13, 2011...the same professional organization as bona fide member U.S . A rm y (M ic ha el L . C as te el ) Army senior NCO directs Soldiers from landing...generous appreciation of the valid ele - ments in the practices and institutions of other nations though they deviate from our own.21 And what of American

  11. 3rd World Congress on Global Optimization in Engineering & Science

    CERN Document Server

    Ruan, Ning; Xing, Wenxun; WCGO-III; Advances in Global Optimization

    2015-01-01

    This proceedings volume addresses advances in global optimization—a multidisciplinary research field that deals with the analysis, characterization, and computation of global minima and/or maxima of nonlinear, non-convex, and nonsmooth functions in continuous or discrete forms. The volume contains selected papers from the third biannual World Congress on Global Optimization in Engineering & Science (WCGO), held in the Yellow Mountains, Anhui, China on July 8-12, 2013. The papers fall into eight topical sections: mathematical programming; combinatorial optimization; duality theory; topology optimization; variational inequalities and complementarity problems; numerical optimization; stochastic models and simulation; and complex simulation and supply chain analysis.

  12. Machining Data Handbook. 3rd Edition. Volume 2

    Science.gov (United States)

    1980-01-01

    HY230 50 ORC age 250 Grade 7 ASTM A538: Grades A, B. C I 8. TOOL STEELS , WROUGHT r~n 5 05.05 1-. Group I 00 t oBOT5 A2 H13 L6 P20 8000 125 Finish: (Max...max 50 R ~ Maraged 0 Rough 112 8. TOOL STEELS , WROUGH4T Rough0 60/2 Group I to40 to 0 P2 H13 L6 P20 6500 !00 Finish- A3 H14 L7 P21 50 R Annealed 0005max...Over .0002 max. 50 Rc Maraged - s- . .__.. _ GroupRough: 8. TOOL STEELS , WROUGHT 1 5000 75 o.00 1/3 to to A60MV A2 H13 L6 P20 6500 200 Finish: A3 H14

  13. 3rd International Conference on Photonics, Optics and Laser Technology

    CERN Document Server

    Raposo, Maria

    2016-01-01

    The book provides a collection of selected papers presented to the third International Conference on Photonics, Optics and Laser Technology PHOTOPTICS 2015, covering the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by the conference program committee members which are highly qualified experts in conference topic areas.

  14. Critical thinking ability of 3rd year radiography students

    African Journals Online (AJOL)

    Tracey Pieterse

    Background: Developing the critical thinking skills of student radiographers is imperative in ... Peer review under responsibility of Johannesburg University. .... the need to teach such skills, and to guide facilitators carefully ..... doctor. In the current study participants could identify the problem but were unable to propose ...

  15. The EPR - technology for the 3rd millennium

    International Nuclear Information System (INIS)

    Bernstrauch, O.; Dubois, F.

    2001-01-01

    This paper is a story of a successful Franco-German co-operation: the EPR project. It is a rundown of the history of the EPR, before a decision is made to launch the lead-unit construction. The EPR is expected to progressively replace the existing nuclear power plants when they will reach the end of their service life. It integrates the latest technological advances, especially in safety and operational aspects and comprises more than 30 years operating experience. Thus, the EPR combines the qualities of its predecessors, the French N4 and the German Konvoi. The safety of the EPR was maximized both to prevent hypothetical accidents - even severe ones - and to reduce their consequences (corium spreading area, pre-stressed double containment with local liner, four-train safety systems...). The n+2 strategy (in the event of a problem with one train and even if a second train is undergoing maintenance, the remaining two are sufficient to perform the function) allows to perform maintenance during operation which leads consequently to short outage periods, highest availabilities and economical operation. Moreover, most of the EPR components are the result of mastered evolution. The reactor vessel, as a key element for the reactor service life, is designed to be in service for 60 years, the core is large (241 fuel elements instead of 205 in the N4 or 193 in the Konvoi) and the steam generators have higher efficiency. Along the same line, the core and core barrel design have been modified to allow a reduced uranium enrichment and the increase to 65 Gigawatt-day per metric-ton of the fuel discharge burn-up. Finally, the instrumentation and control systems minimize human error by giving the operators a grace period of at least 30 minutes to make decisions. (authors)

  16. 3rd International Symposium Mathematical Progress in Expressive Image Synthesis

    CERN Document Server

    Ochiai, Hiroyuki

    2016-01-01

    “Progress in Expressive Image Synthesis” (MEIS2015), was held in Fukuoka, Japan, September 25–27, 2015. The aim of the symposium was to provide a unique venue where various issues in computer graphics (CG) application fields could be discussed by mathematicians, CG researchers, and practitioners. Through the previous symposiums MEIS2013 and MEIS2014, mathematicians as well as CG researchers have recognized that CG is a specific and practical activity derived from mathematical theories. Issues found in CG broaden the field of mathematics and vice versa, and CG visualizes mathematical theories in an aesthetic manner. In this volume, the editors aim to provoke interdisciplinary research projects through the peer-reviewed papers and poster presentations at the this year’s symposium. This book captures interactions among mathematicians, CG researchers, and practitioners sharing important, state-of-the-art issues in graphics and visual perception. The book is suitable for all CG researchers seeking open pro...

  17. Growth and mineral nutrition of field crops 3rd Edition

    Science.gov (United States)

    Green revolution technology of last century led to increased production. The green revolution, however, did not link farming system sustainability to food system sustainability as a whole. In recent years the rate of food-grain production has been lower than the rate of population growth. This will ...

  18. 3rd Workshop on metal ceramic materials for functional applications

    International Nuclear Information System (INIS)

    Korb, G.

    1997-01-01

    This workshop contains contributions about materials and processing, characterization and modeling of properties and applications of metallic ceramics and composite structures. It was held on behalf of the Taiwan-Austrian scientific collaboration in Vienna, June 4 th - 6 th 1997. (Suda)

  19. 3rd report from the LHC performance workshop

    CERN Multimedia

    Bulletin's correspondent from Chamonix

    2012-01-01

    Outside it's a little warmer but Wednesday was spent inside looking forward to the long shutdown (LS1) planned for 2013/14. The total length of the shutdown for the LHC is provisionally around 20 months and there is a huge, huge amount of work on the cards. Provisional planning was presented. The key driver is the splice consolidation work which foresees opening every magnet interconnect in the ring, measuring carefully the resistance of each joint in the cables which carry the current between the dipole and quadrupoles in the arcs of the LHC. It is estimated that 15% of the splices will be re-done; shunts and clamps will be installed across each splice. The aim is to definitively exclude the possibility of a repeat of the incident of 19 September 2008. Besides this, each of the LHC experiments have extensive programs of maintenance and upgrades. Some of the key LHC systems (cryogenics, vacuum, quench protection system, electrical distribution, cooling, ventilation, access, and RF) will undergo m...

  20. 3rd International Civil and Infrastructure Engineering Conference

    CERN Document Server

    Hamid, Nor; Arshad, Mohd; Arshad, Ahmad; Ridzuan, Ahmad; Awang, Haryati

    2016-01-01

    The special focus of these proceedings is on the areas of infrastructure engineering and sustainability management. They provide detailed information on innovative research developments in construction materials and structures, in addition to a compilation of interdisciplinary findings combining nano-materials and engineering. The coverage of cutting-edge infrastructure and sustainability issues in engineering includes earthquakes, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems.

  1. An integrated representation of Romanian 3rd person declensions

    Directory of Open Access Journals (Sweden)

    John S. Lumsden

    2014-11-01

    Full Text Available This paper proposes an analysis of the data of thirteen Romanian declensions. The analysis is constrained by the premise that regular and productive grammatical forms and structures are processed by a task-specific procedural memory, while declarative memory processes only the root forms that carry the conceptual content of nouns, verbs and adjectives and the irregular and non-productive grammatical forms (cf. Paradis and Gopnik 1994, Ullman and Gopnik 1994, 1999, Ullman 2001, 2004, Paradis 2004, 2009, etc.. This premise predicts that these grammatical data must be a single cognitive system. The evidence here strongly supports this view. Furthermore, the hypothesis requires an analysis that makes no appeal to declarative principles. The analysis conforms to this constraint.

  2. Guidelines for chemical peeling in Japan (3rd edition).

    Science.gov (United States)

    2012-04-01

    Chemical peeling may be defined as the therapies, procedures and techniques used for the treatment of certain cutaneous diseases or conditions, and for aesthetic improvement. The procedures include the application of one or more chemical agents to the skin. Chemical peeling has been very popular in both medical and aesthetic fields. Because neither its scientific background is well understood nor a systematic approach established, medical and social problems have taken place. This prompted us to establish and distribute a standard guideline of care for chemical peeling. Previous guidelines such as the 2001 and 2004 versions included minimum standards of care such as indications, chemicals, applications, and any associated precautions, including post-peeling care. The principles in this updated version of chemical peeling are as follows: (i) chemical peeling should be performed under the strict technical control and responsibility of a physician; (ii) the physician should have sufficient knowledge of the structure and physiology of the skin and subcutaneous tissues, and understand the mechanisms of wound-healing induced by chemical peeling; (iii) the physician should be board-certified in an appropriate specialty such as dermatology; and (iv) the ultimate judgment regarding the appropriateness of any specific chemical peeling procedure must be made by the physician while considering all standard therapeutic protocols, which should be presented to each individual patient. Keeping these concepts in mind, this new version of the guidelines includes a more scientific and detailed approach from the viewpoint of evidence-based medicine. © 2011 Japanese Dermatological Association.

  3. 3rd Annual NASA Ames Space Science and Astrobiology Jamboree

    Science.gov (United States)

    Dotson, Jessie

    2015-01-01

    The Space Science and Astrobiology Division at NASA Ames Research Center consists of over 50 civil servants and more than 110 contractors, co-­-ops, post-­-docs and associates. Researchers in the division are pursuing investigations in a variety of fields including exoplanets, planetary science, astrobiology and astrophysics. In addition, division personnel support a wide variety of NASA missions including (but not limited to) Kepler, SOFIA, LADEE, JWST, and New Horizons. With such a wide variety of interesting research going on, distributed among three branches in at least 5 different buildings, it can be difficult to stay abreast of what one's fellow researchers are doing. Our goal in organizing this symposium is to facilitate communication and collaboration among the scientists within the division, and to give center management and other ARC researchers and engineers an opportunity to see what scientific research and science mission work is being done in the division. We are also continuing the tradition within the Space Science and Astrobiology Division to honor one senior and one early career scientist with the Pollack Lecture and the Early Career Lecture, respectively. With the Pollack Lecture, our intent is to select a senior researcher who has made significant contributions to any area of research within the space sciences, and we are pleased to honor Dr. William Borucki this year. With the Early Career Lecture, our intent is to select a young researcher within the division who, by their published scientific papers, shows great promise for the future in any area of space science research, and we are pleased to honor Dr. Melinda Kahre this year

  4. 3rd Understanding Small Enterprises (USE) Conference 2015

    NARCIS (Netherlands)

    Staal, Anne

    2015-01-01

    Procuring green construction innovations: PhD project in New Zealand.

    Presentation USE Conference 2015. How SMEs organize competitive advantage.
    How innovative New Zealand firms procure environmental technical innovations for the construction industry, a literature review.

  5. Vom work Book Journal, 2011 3rd Edition

    African Journals Online (AJOL)

    USER

    In: HARARI, J.: Surgical. Complication of Wound Healing in the Small Animal. Practice. W. B. Saunders Company 143-146. MULLER, G. H., KIRK, R. W. and SCOTT, D. W. (1998): th. Small animal dermatology, 4 Ed. W. B. Saunders. Company, Philadelphia. 771-775. PASCOE, R. R. (1981): Equine dermatoses. Syndey,.

  6. Joint Force Quarterly. Issue 58, 3rd Quarter

    Science.gov (United States)

    2010-06-01

    frontera chileno-argentina: antesala a una crisis binacional?” Tesis Magister en Seguridad y Defensa, Academia Nacional de Estudios Polí- ticos y...Feature 39 Reorienting Grand Strategy: The Promise of Single-equilibrium Defense Planning By Timothy J. Junio and Jonathan Protz 45 Stabilization...biotechnology and its role in defense planning and policymaking, no definitive book has been written on the topic for the defense policymaker, the

  7. Joint Force Quarterly (JFQ). Issue 50, 3rd Quarter, 2008

    Science.gov (United States)

    2008-01-01

    argued in a speech to a conference of Islamic countries in Saudi Arabia that if Euro- peans established Israel out of guilt over the Nazi reign, then...armed Iran would be misplaced. The “Sadat” Military Option Israel’s military operations offer no panacea or easy solution to the Iranian nuclear

  8. The 3rd Central and Eastern European Proteomic Conference

    Czech Academy of Sciences Publication Activity Database

    Gadher, S. J.; Martinková, Jiřina; Drahoš, L.; Vékey, K.; Allmaier, G.; Kovářová, Hana

    2010-01-01

    Roč. 7, č. 1 (2010), s. 15-17 ISSN 1478-9450 Institutional research plan: CEZ:AV0Z50450515 Keywords : proteomics * proteome research * biomarkers Subject RIV: CE - Biochemistry Impact factor: 4.406, year: 2010

  9. Comparison of the performances and validation of three methods for ...

    African Journals Online (AJOL)

    SARAH

    2014-02-28

    Feb 28, 2014 ... bacteria in Norwegian slaughter pigs. Int J. Food Microbiol 1, 301–309. [NCFA] Nordic Committee of Food Analysis (1996). Yersinia enterocolitica Detection in foods 117,. 3rd,edn,1-12. Nowak, B., Mueffling, T.V., Caspari, K. and Hartung, J. 2006 Validation of a method for the detection of virulent Yersinia ...

  10. Methods in Modern Biophysics

    CERN Document Server

    Nölting, Bengt

    2010-01-01

    Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and about 270 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers, and professors in biophysics, biochemistry and related fields. Special features in the 3rd edition: Introduces rapid partial protein ladder sequencing - an important...

  11. Method

    Directory of Open Access Journals (Sweden)

    Ling Fiona W.M.

    2017-01-01

    Full Text Available Rapid prototyping of microchannel gain lots of attention from researchers along with the rapid development of microfluidic technology. The conventional methods carried few disadvantages such as high cost, time consuming, required high operating pressure and temperature and involve expertise in operating the equipment. In this work, new method adapting xurography method is introduced to replace the conventional method of fabrication of microchannels. The novelty in this study is replacing the adhesion film with clear plastic film which was used to cut the design of the microchannel as the material is more suitable for fabricating more complex microchannel design. The microchannel was then mold using polymethyldisiloxane (PDMS and bonded with a clean glass to produce a close microchannel. The microchannel produced had a clean edge indicating good master mold was produced using the cutting plotter and the bonding between the PDMS and glass was good where no leakage was observed. The materials used in this method is cheap and the total time consumed is less than 5 hours where this method is suitable for rapid prototyping of microchannel.

  12. ESNA: European Society for New Methods in Agricultural Research. 23. annual meeting and 3. German meeting on food irradiation. Book of abstracts

    International Nuclear Information System (INIS)

    1993-01-01

    The book comprises 181 abstracts of the 23rd Annual Meeting of the European Society for New Methods in Agricultural Research and the 3rd German Meeting on Food Irradiation. The following subjects were discussed in six workshops: Radiation Technology and 3rd German Meeting on Food Irradiation (44); Advanced Methods in Animal Sciences (17); Soil-Plant Relationships (36); Plant Genetics, Breeding and Physiology (48); Environmental Aspects and Energy Use (16); Pest Management (20). The abstracts are supplemented by an alphabetic index of authors. (UHE) [de

  13. Grid generation methods

    CERN Document Server

    Liseikin, Vladimir D

    2017-01-01

    This new edition provides a description of current developments relating to grid methods, grid codes, and their applications to actual problems. Grid generation methods are indispensable for the numerical solution of differential equations. Adaptive grid-mapping techniques, in particular, are the main focus and represent a promising tool to deal with systems with singularities. This 3rd edition includes three new chapters on numerical implementations (10), control of grid properties (11), and applications to mechanical, fluid, and plasma related problems (13). Also the other chapters have been updated including new topics, such as curvatures of discrete surfaces (3). Concise descriptions of hybrid mesh generation, drag and sweeping methods, parallel algorithms for mesh generation have been included too. This new edition addresses a broad range of readers: students, researchers, and practitioners in applied mathematics, mechanics, engineering, physics and other areas of applications.

  14. method

    Directory of Open Access Journals (Sweden)

    L. M. Kimball

    2002-01-01

    Full Text Available This paper presents an interior point algorithm to solve the multiperiod hydrothermal economic dispatch (HTED. The multiperiod HTED is a large scale nonlinear programming problem. Various optimization methods have been applied to the multiperiod HTED, but most neglect important network characteristics or require decomposition into thermal and hydro subproblems. The algorithm described here exploits the special bordered block diagonal structure and sparsity of the Newton system for the first order necessary conditions to result in a fast efficient algorithm that can account for all network aspects. Applying this new algorithm challenges a conventional method for the use of available hydro resources known as the peak shaving heuristic.

  15. Computational methods for fluid dynamics

    CERN Document Server

    Ferziger, Joel H

    2002-01-01

    In its 3rd revised and extended edition the book offers an overview of the techniques used to solve problems in fluid mechanics on computers and describes in detail those most often used in practice. Included are advanced methods in computational fluid dynamics, like direct and large-eddy simulation of turbulence, multigrid methods, parallel computing, moving grids, structured, block-structured and unstructured boundary-fitted grids, free surface flows. The 3rd edition contains a new section dealing with grid quality and an extended description of discretization methods. The book shows common roots and basic principles for many different methods. The book also contains a great deal of practical advice for code developers and users, it is designed to be equally useful to beginners and experts. The issues of numerical accuracy, estimation and reduction of numerical errors are dealt with in detail, with many examples. A full-feature user-friendly demo-version of a commercial CFD software has been added, which ca...

  16. The Effect of Teaching Methods and Learning Styles on Capabilities of Writing Essays on Elementary School's Students in East Jakarta

    Science.gov (United States)

    Wuryani; Yufiarti

    2017-01-01

    The objective of this research was to discover the effect of teaching methods and learning styles on the student's ability to write essays. This study was conducted in elementary school in East Jakarta. The population of this studies was 3rd-grade elementary school students who study in East Jakarta. Samples were taken with stratified cluster…

  17. Modified Maxium Likelihood Estimation Method for Completely Separated and Quasi-Completely Separated Data for a Dose-Response Model

    Science.gov (United States)

    2015-08-01

    Software] Ross Ihaka and Robert Gentleman, University of Auckland , New Zealand), which are used to estimate an intercept and a slope using the BR method...Stuart A. The Advanced Theory of Statistics, 3rd ed.; Griffin and Company, Ltd.: London, 1969; Vol. 1. 11. Jefferys, H. An Invariant Form for

  18. Recent underwater archaeological research at La Caleta (Cadiz Bay, Spain. An update on Punic evidence (6th-3rd centuries BC | Nuevas investigaciones arqueológicas subacuáticas en el área de La Caleta (Cádiz, España. Estudio de las evidencias de época púnica (siglos VI-III a.C

    Directory of Open Access Journals (Sweden)

    Antonio M. Sáez Romero

    2016-12-01

    Full Text Available The coastal area of La Caleta, which is located in the northwestern side of the current island of Cádiz, is a major landmark for underwater archaeological research in the Atlantic coastline of the Iberian Peninsula. During the last decades, it has provided important discoveries both from geo-archaeological campaigns and from non-scientific activities. The historical interpretation of this set of findings has been diverse, as much as it has been the publication of the results of the archaeological surveys, so the information about the site remains disperse and blurred nowadays. Also, key issues like the discovery of items identified as part of cultic ceremonies (such as miniature amphorae, perfume-burners or tymiatheria, terracottas, etc., and the vicinity of some of the pre-Roman sanctuaries mentioned in classical literary sources, have focused most of the efforts on the study of the site, leaving a secondary role for other crucial topics. This paper discusses briefly the previous research and finds, and provides a panoramic picture of the results of recent archaeological surveys developed between 2008 and 2010. The study of the discoveries dating from the Punic period (6th- 3rd centuries BC will be our main purpose, but new hypothesis about the geo-archaeological evolution of La Caleta and its surroundings and their role as port and cultic areas will be al so discussed. | La zona costera de La Caleta, en el extremo noroccidental de la isla de Cádiz, constituye desde los inicios de la investigación subacuática en la bahía gaditana uno de los principales escenarios de investigación a partir tanto de destacados hallazgos puntuales como de actuaciones geo-arqueológicas científicas. La interpretación de este conjunto de datos ha sido muy dispar, tanto como el grado de publicación de las campañas arqueológicas realizadas, y la información disponible se encuentra actualmente muy dispersa. Asimismo, algunas cuestiones como la aparición de

  19. Proposal and Evaluation of Management Method for College Mechatronics Education Applying the Project Management

    Science.gov (United States)

    Ando, Yoshinobu; Eguchi, Yuya; Mizukawa, Makoto

    In this research, we proposed and evaluated a management method of college mechatronics education. We applied the project management to college mechatronics education. We practiced our management method to the seminar “Microcomputer Seminar” for 3rd grade students who belong to Department of Electrical Engineering, Shibaura Institute of Technology. We succeeded in management of Microcomputer Seminar in 2006. We obtained the good evaluation for our management method by means of questionnaire.

  20. A quick method for testing recessive lethal damage with a diploid strain of Aspergillus nidulans

    International Nuclear Information System (INIS)

    Morpurgo, G.; Puppo, S.; Gualandi, G.; Conti, L.

    1978-01-01

    A simple method capable of detecting recessive lethal damage in a diploid strain of Aspergillus nidulans is described. The method scores the recessive lethals on the 1st, the 3rd and the 5th chromosomes, which represent about 40% of the total map of A. nidulans. Two examples of induced lethals, with ultraviolet irradiation and methyl methanesulfonate are shown. The frequency of lethals may reach 36% of the total population with UV irradiation. (Auth.)